Powered by Deep Web Technologies
Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Nanoparticle Emissions from Internal Combustion Engines | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Nanoparticle Emissions from Internal Combustion Engines Nanoparticle Emissions from Internal Combustion Engines 2004 Diesel Engine Emissions Reduction (DEER) Conference...

2

Modeling of Combustion Processes in Internal Combustion Engines  

Science Journals Connector (OSTI)

Improving internal combustion engines (ICE) and increasing the quality of operation are linked with the necessity of maximally increasing the degree of compression. For ICE with spark ignition (otto cycle), th...

V. A. Vinokurov; V. A. Kaminskii; V. A. Frost…

2000-11-01T23:59:59.000Z

3

Internal combustion engine intake valve  

SciTech Connect (OSTI)

In a inlet valve for use in an internal combustion engine in which the valve has a stem and a head, the head having, when seated, a first side positioned within a combustion chamber of an engine block and a second, opposite, side attached to the stem, the second side including that piston of the head forming the seat with the engine block when the valve is in a seated position, and first side including that portion of the head from the seat toward the chamber when the valve is in the seated position, and the engine including means for moving the valve from the closed position to an open position to allow a fuel mixture to enter the chamber, the improvement in the valve comprising: an extension ridge from the first side, positioned in alignment with the periphery of the valve head, the ridge forming with the seat a single, continuous, smooth outer surface along the periphery thereof for reducing the coefficient of drag of the fuel entering the chamber around the valve head when the valve is in the open position.

Mosler, W.B.

1988-10-25T23:59:59.000Z

4

Axial cylinder internal combustion engine  

SciTech Connect (OSTI)

This patent describes improvement in a barrel type internal combustion engine including an engine block having axial-positioned cylinders with reciprocating pistons arranged in a circular pattern: a drive shaft concentrically positioned within the cylinder block having an offset portion extending outside the cylinder block; a wobble spider rotatably journaled to the offset portion; connecting rods for each cylinder connecting each piston to the wobble spider. The improvement comprising: a first sleeve bearing means supporting the drive shaft in the engine block in a cantilevered manner for radial loads; a second sleeve bearing means rotatably supporting the wobble spider on the offset portion of the drive shaft for radial loads; a first roller bearing means positioned between the offset portion of the drive shaft and the wobble spider carrying thrust loadings only; a second roller bearing means carrying thrust loads only reacting to the first roller bearing located on the opposite end of the driveshaft between the shaft and the engine block.

Gonzalez, C.

1992-03-10T23:59:59.000Z

5

Coal fuel slurry for internal combustion engines  

Science Journals Connector (OSTI)

A technoeconomic study of the production of coal-water fuel slurry for internal combustion engines and thermal power plants was performed. Based on the accumulated experimental data, it was found that, in the ...

N. I. Red’kina; G. S. Khodakov; E. G. Gorlov

2013-09-01T23:59:59.000Z

6

The Effects of Ethanol/Gasoline Blends on Advanced Combustion Strategies in Internal Combustion Engines.  

E-Print Network [OSTI]

??This dissertation presents the effects of blending ethanol with gasoline on advanced combustion strategies in internal combustion engines. The unique chemical, physical and thermal properties… (more)

Fatouraie, Mohammad

2014-01-01T23:59:59.000Z

7

2.61 Internal Combustion Engines, Spring 2004  

E-Print Network [OSTI]

Fundamentals of how the design and operation of internal combustion engines affect their performance, operation, fuel requirements, and environmental impact. Study of fluid flow, thermodynamics, combustion, heat transfer ...

Heywood, John B.

8

Jet plume injection and combustion system for internal combustion engines  

DOE Patents [OSTI]

An improved combustion system for an internal combustion engine is disclosed wherein a rich air/fuel mixture is furnished at high pressure to one or more jet plume generator cavities adjacent to a cylinder and then injected through one or more orifices from the cavities into the head space of the cylinder to form one or more turbulent jet plumes in the head space of the cylinder prior to ignition of the rich air/fuel mixture in the cavity of the jet plume generator. The portion of the rich air/fuel mixture remaining in the cavity of the generator is then ignited to provide a secondary jet, comprising incomplete combustion products which are injected into the cylinder to initiate combustion in the already formed turbulent jet plume. Formation of the turbulent jet plume in the head space of the cylinder prior to ignition has been found to yield a higher maximum combustion pressure in the cylinder, as well as shortening the time period to attain such a maximum pressure.

Oppenheim, Antoni K. (Kensington, CA); Maxson, James A. (Berkeley, CA); Hensinger, David M. (Albany, CA)

1993-01-01T23:59:59.000Z

9

Starting apparatus for internal combustion engines  

DOE Patents [OSTI]

This report is a patent description for a system to start an internal combustion engine. Remote starting and starting by hearing impaired persons are addressed. The system monitors the amount of current being drawn by the starter motor to determine when the engine is started. When the engine is started the system automatically deactivates the starter motor. Five figures are included.

Dyches, G.M.; Dudar, A.M.

1995-01-01T23:59:59.000Z

10

Marine propulsion device internal combustion engine  

SciTech Connect (OSTI)

This patent describes an internal combustion engine. It comprises an engine block including a surface, means including the engine block surface for defining a substantially sealed chamber, and pressure relief means including a movable valve member for venting the chamber when the pressure in the chamber exceeds a predetermined value, the chamber containing one of the following: a flywheel, means for generating an electrical current, a finned heat exchanger, and means for starting the engine.

Anderson, P.A.; Bernau, W.A.; Breckenfeld, P.W.; Broughton, G.L.

1992-01-07T23:59:59.000Z

11

Electronic governor for an internal combustion engine  

SciTech Connect (OSTI)

An electronic governor for an internal combustion engine provided with a fuel injection pump for supplying fuel to the engine and having a control rack for adjusting fuel injection amount is described comprising, means providing a designated speed signal Vno indicative of the desired rotational speed No of the internal combustion engine, a speed detector detecting the rotational speed N of the internal combustion engine and producing the speed detection signal Vn indicative of the rotational speed N, a rack position detector detecting the position of the rack and producing a rack position detection signal VL indicative of the position of the rack, a speed deviation operation circuit responsive to the speed detection signal Vn for producing a constant speed control signal Vnd for effecting control to maintain the deviation of the actual rotational speed N from the designated rotational speed No within a permissible range, a rack position deviation operation circuit for producing a maximum rack position control signal VLd for effecting control to maintain the deviation of the rack position, a control mode selector and means responsive to the output of the control mode selector for controlling the rack to cause the deviation of the actual rotational speed N from the designated rotational speed No or the rack position from the maximum rack position to be within a certain range.

Nanjyo, H.; Suzuki, H.

1987-11-24T23:59:59.000Z

12

LabVIEW internal combustion engine detonation frequency analysis.  

E-Print Network [OSTI]

??The project discussed herein is to develop the hardware and software necessary to identify the detonation frequency of a BMW S14 internal combustion engine. This… (more)

McClain, Kevin

2011-01-01T23:59:59.000Z

13

HICEV AMERICA: HYDROGEN INTERNAL COMBUSTION ENGINE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HICEV AMERICA: HICEV AMERICA: HYDROGEN INTERNAL COMBUSTION ENGINE VEHICLE (HICEV) TECHNICAL SPECIFICATIONS Revision 0 November 1, 2004 Prepared by Electric Transportation Applications HICEV America Vehicle Specification i TABLE OF CONTENTS Minimum Vehicle Requirements 1 1. Regulatory Requirements 7 2. Chassis 8 3. Vehicle Characteristics 10 4. Drive System 11 5. Vehicle Performance 12 6. Hydrogen Fuel Storage System (HFSS) 14 7. Additional Vehicle Systems 17 8. Documentation 18 Appendices Appendix A - Vehicle Data 19 Appendix B - FMVSS Certification Methodology 26 DB12/7/04 HICEV America Vehicle Specification 2 MINIMUM VEHICLE REQUIREMENTS The HICEV America Program is sponsored by the U.S. Department of Energy Office of Transportation Technology to provide for independent assessment of hydrogen fueled, internal

14

BIBLIOGRAPHY ON INTERNAL COMBUSTION ENGINES 1. F. Obert, Internal Combustion Engines and Air Pollution, Intext Educational Publishers, 1973  

E-Print Network [OSTI]

engines, now somewhat dated.) 6. M. Khovakh (general editor) Motor Vehicle Engines. English translation, Akademiai Kaido:Budapest, 1974. (A monograph on heat transfer in spark-ignition and diesel enginesBIBLIOGRAPHY ON INTERNAL COMBUSTION ENGINES 1. F. Obert, Internal Combustion Engines and Air

Goldwasser, Shafi

15

Control of Combustion Processes in an Internal Combustion Engine by Low-Temperature Plasma  

Science Journals Connector (OSTI)

A new method of operation of internal combustion engines enhances power and reduces fuel consumption and exhaust toxicity. Low-temperature plasma control combines working processes of thermal engines and steam machines into a single process.

E. A. Olenev

2002-07-01T23:59:59.000Z

16

Control of Combustion Processes in an Internal Combustion Engine by Low-Temperature Plasma  

Science Journals Connector (OSTI)

A new method of operation of internal combustion engines enhances power and reduces fuel consumption and exhaust toxicity. Low-temperature plasma control combines working processes of thermal engines and steam...

E. A. Olenev

2002-07-01T23:59:59.000Z

17

Cooling system for internal combustion engines  

SciTech Connect (OSTI)

A cooling system for an internal combustion engine is described comprising: a head-side water jacket and a block-side water jacket made independent of each other; and a radiator and a cooling fan shared between the two water jackets. The improvement comprises: a first cooling water conduit for connecting the outlet of the head-side water jacket and the inlet of the radiator; a mixing valve having two water inlets and one water outlet; a second cooling water conduit for connecting one of the water inlets of the mixing valve and the outlet of the radiator; a third conduit for connecting the water outlet of the block-side water jacket and the remaining one of the water inlets of the mixing valve; a water pump, a fourth conduit branched midway from the second conduit and connected with the water inlet of the head-side water jacket; an auxiliary water pump; a fifth conduit branched midway from the third conduit and connected with the first conduit; one-way valve; and a control unit for controlling the mixing ratio of the mixing valve, the displacement of the auxiliary water pump and the operation of the cooling fan.

Itakura, M.

1988-07-26T23:59:59.000Z

18

Optimal internal combustion engine tuning utilizing perturbation/correlation  

E-Print Network [OSTI]

OPTIMAL INTERNAL COMBUSTION ENGINE TUNING UTILIZING PERTURBATION/CORRELATION A Thesis by BRIAN DANIEL PAUTLER Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE May 2003 Major Subject: Mechanical Engineering OPTIMAL INTERNAL COMBUSTION ENGINE TUNING UTILIZING PERTURBATION/CORRELATION A Thesis by BRIAN DANIEL PAUTLER Submitted to the Office of Graduate Studies of Texas A&M Umversity...

Brian Daniel Pautler

2012-06-07T23:59:59.000Z

19

E-Print Network 3.0 - asme internal combustion Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

"A" and "B" correspond to the internal channel flow state of the combustible mixture... , heat loss, and combustion ... Source: Akbari, Pezhman "Pejman" - Department of Mechanical...

20

Hydrogen Internal Combustion Engine (ICE) Vehicle Testing Activities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Internal Combustion Internal Combustion Engine (ICE) Vehicle Testing Activities James Francfort Idaho National Laboratory 2 Paper #2006-01-0433 Presentation Outline Background and goal APS Alternative Fuel (Hydrogen) Pilot Plant - design and operations Fuel dispensing and prototype dispenser Hydrogen (H2) and HCNG (compressed natural gas) internal combustion engine (ICE) vehicle testing WWW Information 3 Paper #2006-01-0433 Background Advanced Vehicle Testing Activity (AVTA) is part of DOE's FreedomCAR and Vehicle Technologies Program These activities are conducted by the Idaho National Laboratory (INL) and the AVTA testing partner Electric Transportation Applications (ETA) 4 Paper #2006-01-0433 AVTA Goal Provide benchmark data for technology modeling, research and development programs, and help fleet managers and

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

The evaluation and application of Orimulsion by International Combustion Ltd  

SciTech Connect (OSTI)

Since the introduction of Orimulsion, in the 1980`s as a potential fuel for power generation, International Combustion Ltd. (ICL) have been involved with the original fuel manufacturer PdeV (Petroleos de Venezuela) and their commercial marketing organization (BITOR) in a comprehensive evaluation of this fuel for application to power generation boilers. This work encompassed both chemical and physical analyses of the original fuel formulations and modifications to improve handling and combustion performance. The first commercial scale firing demonstration of Orimulsion was performed by ICL in their full scale combustion test facilities at Derby in the UK. On this occasion PdeV took the opportunity to bring upwards of 40 visitors from 14 different countries to witness this full scale combustion demonstration which took place over a two week period during November, 1987. Further full scale combustion demonstration and development was carried out on alternative fuel formulations and combustion equipment for application to a 400 MWe front wall fired boiler at Florida Power and Light Sanford Utility in 1990. Recently the Orimulsion combustion work at ICL has concentrated on the application of the fuel in low NOx burner systems with potential for utilization in large (500 MWe plus) oil fired boilers both in the UK and USA. Fuel and gas handling equipment and hardware have been supplied by ICL to the 120 MWe and 500 MWe utility boilers operating on Orimulsion, on a continuous basis in the UK.

Allen, J.W.; Beal, P.R. [International Combustion Ltd., Derby (United Kingdom). Rolls-Royce Industrial Power Group

1996-12-31T23:59:59.000Z

22

PHYSICAL REVIEW E 90, 022139 (2014) Enhanced efficiency of internal combustion engines by employing spinning gas  

E-Print Network [OSTI]

PHYSICAL REVIEW E 90, 022139 (2014) Enhanced efficiency of internal combustion engines by employing; published 28 August 2014) The efficiency of the internal combustion engine might be enhanced by employing Optimizing the internal combustion engine to achieve the highest possible fuel efficiency can be approached

23

Apparatus for photocatalytic destruction of internal combustion engine emissions during cold start  

DOE Patents [OSTI]

A method and apparatus for the destruction of emissions from an internal combustion engine wherein a substrate coated with TiO.sub.2 is exposed to a light source in the exhaust system of an internal combustion engine thereby catalyzing oxidation/reduction reactions between gaseous hydrocarbons, carbon monoxide, nitrogen oxides and oxygen in the exhaust of the internal combustion engine.

Janata, Jiri (Richland, WA); McVay, Gary L. (Richland, WA); Peden, Charles H. (West Richland, WA); Exarhos, Gregory J. (Richland, WA)

1998-01-01T23:59:59.000Z

24

Methanol vaporization and injection system for internal combustion engine  

SciTech Connect (OSTI)

An engine equipped with an alcohol vaporization injection system operates as a four stroke cycle diesel engine that transfers the heat of exiting exhaust gases and cylinder head walls to the fuel. The engine runs on alcohol. The alcohol becomes vaporized and its pressure is high enough so that when a valve is opened between the high pressure fuel line and the combustion chamber (when it is at the peak of its compression ratio) enough alcohol will enter the combustion chamber to allow proper combustion. The overall advantages to this type of alcohol vaporization injection system is that it adds relatively few new mechanisms to the spark ignition four cycle internal combustion engine to enable it to operate as a diesel engine with a high thermal efficiency. This alcohol injection system exploits the engine's need for greater volumes of alcohol caused by the alcohol's relatively low heat of combustion (When compared to gasoline) by using this greater volume of fuel to return greater quantities of heat back to the engine to a much greater degree than other fuels can.

Bayley, R.I.

1980-05-06T23:59:59.000Z

25

Enhanced Efficiency of Internal Combustion Engines By Employing Spinning Gas  

SciTech Connect (OSTI)

The efficiency of the internal combustion engine might be enhanced by employing spinning gas. A gas spinning at near sonic velocities has an effectively higher heat capacity, which allows practical fuel cycles, which are far from the Carnot efficiency, to approach more closely the Carnot efficiency. A gain in fuel efficiency of several percent is shown to be theoretically possible for the Otto and Diesel cycles. The use of a flywheel, in principle, could produce even greater increases in the efficiency.

Geyko, Vasily; Fisch, Nathaniel

2014-02-27T23:59:59.000Z

26

Modeling the lubrication of the piston ring pack in internal combustion engines using the deterministic method  

E-Print Network [OSTI]

Piston ring packs are used in internal combustion engines to seal both the high pressure gas in the combustion chamber and the lubricant oil in the crank case. The interaction between the piston ring pack and the cylinder ...

Chen, Haijie

2011-01-01T23:59:59.000Z

27

Nitrogen enriched combustion of a natural gas internal combustion engine to reduce NO.sub.x emissions  

DOE Patents [OSTI]

A method and system for reducing nitrous oxide emissions from an internal combustion engine. An input gas stream of natural gas includes a nitrogen gas enrichment which reduces nitrous oxide emissions. In addition ignition timing for gas combustion is advanced to improve FCE while maintaining lower nitrous oxide emissions.

Biruduganti, Munidhar S. (Naperville, IL); Gupta, Sreenath Borra (Naperville, IL); Sekar, R. Raj (Naperville, IL); McConnell, Steven S. (Shorewood, IL)

2008-11-25T23:59:59.000Z

28

Coal-water slurry fuel internal combustion engine and method for operating same  

DOE Patents [OSTI]

An internal combustion engine fueled with a coal-water slurry is described. About 90 percent of the coal-water slurry charge utilized in the power cycle of the engine is directly injected into the main combustion chamber where it is ignited by a hot stream of combustion gases discharged from a pilot combustion chamber of a size less than about 10 percent of the total clearance volume of main combustion chamber with the piston at top dead center. The stream of hot combustion gases is provided by injecting less than about 10 percent of the total coal-water slurry charge into the pilot combustion chamber and using a portion of the air from the main combustion chamber that has been heated by the walls defining the pilot combustion chamber as the ignition source for the coal-water slurry injected into the pilot combustion chamber.

McMillian, Michael H. (Fairmont, WV)

1992-01-01T23:59:59.000Z

29

Apparatus for photocatalytic destruction of internal combustion engine emissions during cold start  

SciTech Connect (OSTI)

A method and apparatus are disclosed for the destruction of emissions from an internal combustion engine wherein a substrate coated with TiO{sub 2} is exposed to a light source in the exhaust system of an internal combustion engine thereby catalyzing oxidation/reduction reactions between gaseous hydrocarbons, carbon monoxide, nitrogen oxides and oxygen in the exhaust of the internal combustion engine. 4 figs.

Janata, J.; McVay, G.L.; Peden, C.H.; Exarhos, G.J.

1998-07-14T23:59:59.000Z

30

Coal/waste cofiring: International survey of combustion practices  

SciTech Connect (OSTI)

Coal is an abundant fuel resource worldwide with an historically stable price. The use of coal is expected to increase, particularly in developing countries; and, as industrialization increases, so will the amount of various waste materials and the environmental problems associated with their disposal. Therefore, coal/waste cofiring can offer an environmentally sound, economic approach to both waste remediation and energy production. This paper highlights the results of an international survey of coal/waste cofiring by describing the principal wastes used and the combustion technologies employed. Also provided are examples of cofiring and areas where cofired fuel parameters will have an effect on boiler performance.

Harding, N.S.; Smouse, S.M.; Ekmann, J.M.; Winslow, J.S. [Dept. of Energy, Pittsburgh, PA (United States). Pittsburgh Energy Technology Center; Ramezan, M. [Burns and Roe Services Corp., Pittsburgh, PA (United States)

1996-12-31T23:59:59.000Z

31

Cylinder wall waste heat recovery from liquid-cooled internal combustion engines utilizing thermoelectric generators.  

E-Print Network [OSTI]

?? This report is a dissertation proposal that focuses on the energy balance within an internal combustion engine with a unique coolant-based waste heat recovery… (more)

Armstead, John Randall

2012-01-01T23:59:59.000Z

32

Design of battery pack and internal combustion engine thermal models for hybrid electric vehicles.  

E-Print Network [OSTI]

?? This thesis focuses on the design of computational models, capable of simulating the thermal behaviour of a battery pack and internal combustion engine equipping… (more)

Catacchio, Gabriele

2013-01-01T23:59:59.000Z

33

Idling control device for internal combustion engine with turbocharger  

SciTech Connect (OSTI)

An idling control device is described for an internal combustion engine with a turbocharger, comprising: an air intake pipe having an inlet at an upstream end thereof adapted to accept air which is to be supplied through the air intake pipe to the internal combustion engine a turbocharger having a housing incorporated in the air intake pipe between the inlet and the outlet, a throttle valve incorporated in the air intake pipe between the turbocharger and the outlet, a surge tank incorporated in the air intake pipe between the throttle valve and the outlet; a bypass air passage means provided in parallel with the air intake pipe between upstream of the turbocharger and downstream of the throttle valve; a flow-control valve incorporated in the bypass air passage means; an actuator operatively associated with the flow-control valve, a computer operatively associated with the actuator and arranged to receive signals relating to operating conditions of the engine; a check valve incorporated in the bypass air passage means downstream of the flow-control valve.

Ando, H.; Kondo, T.

1986-09-23T23:59:59.000Z

34

Exhaust gas recirculation system for an internal combustion engine  

DOE Patents [OSTI]

An exhaust gas recirculation system for an internal combustion engine comprises an exhaust driven turbocharger having a low pressure turbine outlet in fluid communication with an exhaust gas conduit. The turbocharger also includes a low pressure compressor intake and a high pressure compressor outlet in communication with an intake air conduit. An exhaust gas recirculation conduit fluidly communicates with the exhaust gas conduit to divert a portion of exhaust gas to a low pressure exhaust gas recirculation branch extending between the exhaust gas recirculation conduit and an engine intake system for delivery of exhaust gas thereto. A high pressure exhaust gas recirculation branch extends between the exhaust gas recirculation conduit and the compressor intake and delivers exhaust gas to the compressor for mixing with a compressed intake charge for delivery to the intake system.

Wu, Ko-Jen

2013-05-21T23:59:59.000Z

35

Mitigating the effect of siloxanes on internal combustion engines using landfill gasses  

DOE Patents [OSTI]

A waste gas combustion method that includes providing a combustible fuel source, in which the combustible fuel source is composed of at least methane and siloxane gas. A sodium source or magnesium source is mixed with the combustible fuel source. Combustion of the siloxane gas of the combustible fuel source produces a silicon containing product. The sodium source or magnesium source reacts with the silicon containing product to provide a sodium containing glass or sodium containing silicate, or a magnesium containing silicate. By producing the sodium containing glass or sodium containing silicate, or the magnesium containing silicate, or magnesium source for precipitating particulate silica instead of hard coating, the method may reduce or eliminate the formation of silica deposits within the combustion chamber and the exhaust components of the internal combustion engine.

Besmann, Theodore M

2014-01-21T23:59:59.000Z

36

Traveling-Wave Thermoacoustic Engines With Internal Combustion  

DOE Patents [OSTI]

Thermoacoustic devices are disclosed wherein, for some embodiments, a combustion zone provides heat to a regenerator using a mean flow of compressible fluid. In other embodiments, burning of a combustible mixture within the combustion zone is pulsed in phase with the acoustic pressure oscillations to increase acoustic power output. In an example embodiment, the combustion zone and the regenerator are thermally insulated from other components within the thermoacoustic device.

Weiland, Nathan Thomas (Blacksburg, VA); Zinn, Ben T. (Atlanta, GA); Swift, Gregory William (Sante Fe, NM)

2004-05-11T23:59:59.000Z

37

Hydrocarbon-fueled internal combustion engines: "the worst form of vehicle propulsion... except for all the other forms"  

E-Print Network [OSTI]

Hydrocarbon-fueled internal combustion engines: "the worst form of vehicle propulsion... except of Southern California, Los Angeles, CA 90089-1453 Introduction Hydrocarbon-fueled internal combustion engines. For the purposes of this paper: An internal combustion engine is a heat engine (a device in which thermal energy

38

Romania - 30 years of experience in in situ combustion  

SciTech Connect (OSTI)

Starting with 1963, simultaneous pilot and semi-commercial steam flooding and in situ combustion tests were carried out at Suplacu de Barcau heavy oil field (16{degrees} API). The performance of in situ combustion was by far better and as a result, the entire reservoir was designed to produce by this method, by abandoning the {open_quotes}patterns{close_quotes} concept and introducing the {open_quotes}continuous front{close_quotes} concept. Under primary production, the ultimate recovery factor would have been 9.2%, while an ultimate recovery factor of at least 50% is expected by in situ combustion. In situ combustion was applied on three other major reservoirs: Balaria in 1975, East Videle in 1979, and West Videle in 1980. For those reservoirs, as compared to the average ultimate recovery of about 10% under primary production, an average ultimate recovery of at least 35% is expected by in situ combustion. From an important amount of technological studies and site operations, this paper selects and presents comments and remarks related to the strategy of the field development, the {open_quotes}continuous front{close_quotes} or {open_quotes}patterns{close_quotes} system, production monitoring, difficulties encountered, etc. In situ combustion is economically advantageous if the reservoir is carefully selected and the applied technology is of an adequate quality and suitable for the respective reservoir.

Machedon, V.; Popescu, T.; Paduraru, R. [Research and Design Institute for Oil and Gas, Cimpina (Romania)

1995-02-01T23:59:59.000Z

39

Valve supporting arrangement of an internal combustion engine  

SciTech Connect (OSTI)

A supporting arrangement is described for a valve of an internal combustion engine having a valve stem portion, comprising a rigid member for supporting the stem portion of the valve for axial movement of the valve, a stamped or press-formed upper retainer connected to the upper portion of the valve stem, a lower annular retainer disposed on the rigid member and surrounding the valve stem, and a coil spring compressed between the upper and lower retainers to bias the valve in a direction to close the associated valve opening. The upper retainer has a substantially constant thickness throughout and comprises an annular collar portion having an essentially constant diameter along the length thereof with the diameter at least substantially equal to the inner diameter of the coil spring. The collar portion is coaxially disposed within an upper portion of the coil spring, an annular flange portion extending radially outwardly from the upper end of the collar portion and engaging with the upper end of the coil spring, and means for achieving a spline connection between the central portion of the retainer and the upper portion of the valve stem, and wherein the upper retainer is divided along a diameter into two identical elements which are disposed about the upper portion of the valve stem such that the radial pressure exerted by the coil spring operates to bias the identical elements into their respective positions operative to connect the upper retainer to the valve stem.

Hayashi, Y.

1986-05-27T23:59:59.000Z

40

Effects of lubricant viscosity and surface texturing on ring-pack performance in internal combustion engines  

E-Print Network [OSTI]

The piston ring-pack contributes approximately 25% of the mechanical losses in an internal combustion engine. Both lubricant viscosity and surface texturing were investigated in an effort to reduce this ring-pack friction ...

Takata, Rosalind (Rosalind Kazuko), 1978-

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Water distillation using waste engine heat from an internal combustion engine  

E-Print Network [OSTI]

To meet the needs of forward deployed soldiers and disaster relief personnel, a mobile water distillation system was designed and tested. This system uses waste engine heat from the exhaust flow of an internal combustion ...

Mears, Kevin S

2006-01-01T23:59:59.000Z

42

Numerical modeling of piston secondary motion and skirt lubrication in internal combustion engines  

E-Print Network [OSTI]

Internal combustion engines dominate transportation of people and goods, contributing significantly to air pollution, and requiring large amounts of fossil fuels. With increasing public concern about the environment and ...

McClure, Fiona

2007-01-01T23:59:59.000Z

43

Modeling the structural behavior of the piston rings under different boundary conditions in internal combustion engines  

E-Print Network [OSTI]

In the process of designing internal combustion engine, piston ring plays an important role in fulfilling the requirements of camber gas sealing, friction reduction and lubrication oil consumption. The goal of this thesis ...

Xu, Dian

2010-01-01T23:59:59.000Z

44

Thermochemical conversion of fuels into hydrogen-containing gas using recuperative heat of internal combustion engines  

Science Journals Connector (OSTI)

The problem of the thermochemical recuperation of heat from the exhaust gases of internal combustion engines (ICEs) as a method of ... the steam conversion of oxygen-containing fuels into syngas were developed, a...

V. A. Kirillov; A. B. Shigarov; N. A. Kuzin…

2013-09-01T23:59:59.000Z

45

Computations and modeling of oil transport between piston lands and liner in internal combustion engines  

E-Print Network [OSTI]

The consumption of lubricating oil in internal combustion engines is a continuous interest for engine developers and remains to be one of the least understood areas. A better understanding on oil transport is critical to ...

Fang, Tianshi

2014-01-01T23:59:59.000Z

46

A new modeling approach of pressure waves at the inlet of internal combustion engines  

Science Journals Connector (OSTI)

This paper presents a new model used to describe the propagation of pressure waves at the inlet systems of internal combustion engine. In the first part, an analogy ... a pipe and a mechanical ideal mass damper spring

David Chalet; Alexandre Mahé; Jean-François Hétet…

2011-06-01T23:59:59.000Z

47

This Year's MEISPP Interns | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

This Year's MEISPP Interns This Year's MEISPP Interns This Year's MEISPP Interns August 12, 2010 - 5:56pm Addthis Bill Valdez Bill Valdez Principal Deputy Director One of the key programs of the Department of Energy's Office of Economic Impact and Diversity is our Minority Educational Institution Student Partnership Program (MEISPP). The MEISPP has become a major recruitment program for DOE managers who are committed to building the highest quality workforce at the Department. Students have unique experiences during their 10 weeks at DOE and perform substantive professional and technical work that furthers the Department's missions in energy, environment, national security and scientific discovery. Beyond having the opportunity to add to the mission of DOE, MEISPP interns receive a stipend along with paid

48

The railplug: Development of a new ignitor for internal combustion engines. Final report  

SciTech Connect (OSTI)

A three year investigation of a new type of ignitor for internal combustion engines has been performed using funds from the Advanced Energy Projects Program of The Basic Energy Sciences Division of the U.S. Department of Energy and with matching funding from Research Applications, Inc. This project was a spin-off of {open_quotes}Star Wars{close_quotes} defense technology, specifically the railgun. The {open_quotes}railplug{close_quotes} is a miniaturized railgun which produces a high velocity plume of plasma that is injected into the combustion chamber of an engine. Unlike other types of alternative ignitors, such as plasma jet ignitors, electromagnetic forces enhance the acceleration of the plasma generated by a railplug. Thus, for a railplug, the combined effects of electromagnetic and thermodynamic forces drive the plasma into the combustion chamber. Several engine operating conditions or configurations can be identified that traditionally present ignition problems, and might benefit from enhanced ignition systems. One of these is ultra-lean combustion in spark ignition (SI) engines. This concept has the potential for lowering emissions of NOx while simultaneously improving thermal efficiency. Unfortunately, current lean burn engines cannot be operated sufficiently lean before ignition related problems are encountered to offer any benefits. High EGR engines have similar potential for emissions improvement, but also experience similar ignition problems, particularly at idle. Other potential applications include diesel cold start, alcohol and dual fuel engines, and high altitude relight of gas turbines. The railplug may find application for any of the above. This project focused on three of these potential applications: lean burn SI engines, high EGR SI engines, and diesel cold start.

Matthews, R.D.; Nichols, S.P.; Weldon, W.F.

1994-11-29T23:59:59.000Z

49

Module 3: Hydrogen Use in Internal Combustion Engines  

Broader source: Energy.gov [DOE]

This course covers combustive properties, air/fuel ratio, types of pre-ignition problems, type of ignition systems, crankcase ventilation issues, thermal efficiency, emissions, power output, effect of mixing hydrogen

50

Method for the operation of internal combustion engines. [gasification reactor for reforming gasoline  

SciTech Connect (OSTI)

This is a method for the operation of internal combustion engines which is designed to decontaminate the exhaust gases. The method includes: feeding a gasification air stream into a gasification reactor; feeding fuel into the same gasification reactor; combining the fuel with the gasification air into a homogeneous fuel-air mixture in the gasification reactor; and converting the fuel-air mixture by partial combustion into a soot -free reformed gas. Then, the reformed gas is fed from the gasification reactor to a mixer where the reformed gas is mixed with combustion air and the reformed gas-air mixture is fed to the internal combustion engine for further combustion with the result that there is intensive decontamination of the exhaust gases which thereby reduces air pollution. The reformed gas temperature is adjusted low for maximum engine output, and is adjusted higher for lower engine temperatures in order to obtain a reformed gas which is richer in hydrogen and thereby produce exhaust gases which are lower in harmful substances. In reference to the exhaust gases in an internal combustion engine, this method achieves the highest possible degree of decontamination, not only of the carbon monoxide and hydrocarbons , but also of the nitrous oxides in the exhaust gases. Using this method, the internal combustion engine can be operated not only with high-test, no-knock gasoline, but also with cheap, lead-free low octane, straight-run gasoline which is low in aromatics and olefins, which normally do not have no-knock properties, and the internal combustion engine can be operated with the lowest possible fuel consumption. The gasification reactor operates through chemical reaction in the presence of a catalyst. Optionally, this method may include a return of part of the reformed gas to the input of the gasification reactor.

Muhlberg, E.

1980-01-29T23:59:59.000Z

51

"Optimization of efficiency of internal combustion engines via using  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optimization of efficiency of internal combustion engines via using Optimization of efficiency of internal combustion engines via using spinning gas and non-spectroscopic method of determining gas constituents through rotation ..--.. Inventors Nathaniel Fisch, Vasily Geyko An important use of the disclosed approach is the improvement efficiency of thermal cycles and as result efficiency of engines. Different cycles and different ways of compression of spinning gas may be used to maximize possible efficiency gain. In conventional internal combustion engines, gas spinning is either not used at all or used only with the purpose of increasing turbulence and better mixing. In the disclosed method, gas rotation is used for energy storage, hence it allows an improvement in thermal cycle efficiency. To achieve significant effect related to

52

Performance of an Internal Combustion Engine Operating on Landfill Gas and the Effect of Syngas Addition  

Science Journals Connector (OSTI)

Performance of an Internal Combustion Engine Operating on Landfill Gas and the Effect of Syngas Addition ... The performance of a four-stroke Honda GC160E spark ignition (SI) internal combustion (IC) engine operating on landfill gas (LFG) was investigated, as well as the impact of H2 and CO (syngas) addition on emissions and engine efficiency. ... In addition, variation across both the syngas content (up to 15%) and the ratio of H2 to CO in the syngas (H2/CO = 0.5, 1, and 2) were tested. ...

McKenzie P. Kohn; Jechan Lee; Matthew L. Basinger; Marco J. Castaldi

2011-02-07T23:59:59.000Z

53

Review and recent developments of laser ignition for internal combustion engines applications  

Science Journals Connector (OSTI)

Performance of future ignition system for internal combustion engines should be reliable and efficient to enhance and sustain combustion stability, since ignition not only initiates combustion but also influences subsequent combustion. Lean burn systems have been regarded as an advanced combustion approach that could improve thermal efficiency while reducing exhaust gas emissions. However, current engines cannot be operated sufficiently lean due to ignition related problems such as the sluggish flame initiation and propagation along with potential misfiring. A high exhaust gas recirculation engines also has similar potential for emissions improvement, but could also experience similar ignition problems, particularly at idle operation. Similarly, ignition is an important design factor in gas turbine and rocket combustor. Recently, non-conventional ignition techniques such as laser-induced ignition methods have become an attractive field of research in order to replace the conventional spark ignition systems. The fundamentals of conventional laser-induced spark ignition have been previously reviewed. Therefore, the objective of this article is to review progress on the use of such innovative techniques of laser-induced ignition including laser-induced cavity ignition and laser-induced multi-point ignition. In addition, emphasis is given to recent work to explore the feasibility of this interesting technology for practical applications concerning internal combustion engines.

Mohamed H. Morsy

2012-01-01T23:59:59.000Z

54

Developing an approach utilizing local deterministic analysis to predict the cycle friction of the piston ring-pack in internal combustion engines  

E-Print Network [OSTI]

Nowadays, a rapid growth of internal combustion (IC) engines is considered to be a major contributor to energy crisis. About 20% of the mechanical loss in internal combustion engines directly goes to the friction loss ...

Liu, Yang, S.M. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

55

Apparatus for improving gasoline comsumption, power and reducing emission pollutants of internal combustion engines  

SciTech Connect (OSTI)

This patent describes an apparatus for improving performance and reducing fuel comsumption and emission pollutants from an internal combustion gasoline engine. This apparatus consists of: 1.) an internal combustion gasoline engine having, in part, an intake manifold and an exhaust manifold where the exhaust manifold is modified to include a manifold exhaust port; 2.) a modified internal combustion engine carburetor connected to the intake manifold on the engine; 3.) a positive crankcase ventilation valve (PCV) which has an input port conventionally connected to the internal combustion engine and also has a PCV output port; 4.) an automobile fuel pump having an input connected to a conventional fuel tank and having a fuel pump output port; 5.) a thermic reactor; 6.) a thermic reactor air cleaner pneumatically connected to the clean air input port on the thermic reactor; 7.) a catalytic gas injector; 8.) a fuel regulator/restrictor consisting of a solid block having a fuel pump input port and a carburetor output port.

Piedrafita, R.

1986-02-18T23:59:59.000Z

56

Australian Aboriginal Astronomy in the International Year of Astronomy  

E-Print Network [OSTI]

1 Australian Aboriginal Astronomy in the International Year of Astronomy Ray P. Norris CSIRO Astronomy & Space Science, NSW, Australia Warawara Dept. The International year of Astronomy seemed an excellent opportunity to tell the wider

Norris, Ray

57

Proceedings of the sixth international conference on fluidized bed combustion. Volume II. Technical sessions  

SciTech Connect (OSTI)

The Sixth International Conference on Fluidized Bed Combustion was held April 9-11, 1980, at the Atlanta Hilton, Atlanta, Georgia. It was sponsored by the US Department of Energy, the Electric Power Research Institute, the US Environmental Protection Agency, and the Tennessee Valley Authority. The papers covered recent developments in atmospheric and pressurized fluidized-bed combustion, especially the design, operation and control of pilot and demonstration plants. The cleanup of combustion products and the erosion, corrosion and fouling of gas turbines was emphasized also. Fifty-five papers from Volume 2 of the proceedings have been entered individually into EDB and ERA; five papers had been entered previously from other sources. (LTN)

none,

1980-08-01T23:59:59.000Z

58

Proceedings of the Sixth International Conference on Fluidized Bed Combustion. Volume 1. Plenary sessions  

SciTech Connect (OSTI)

The Sixth International Conference on Fluidized Bed Combustion was held at the Atlanta Hilton, Atlanta, Georgia, April 9-11, 1980. The papers in this volume involved presentation of the research and development programs of the US (US DOE, TVA, EPRI and US EPA), United Kingdom, Federal Republic of Germany and the People's Republic of China. Eight papers from Vol. 1 (Plenary Sessions) of the proceedings have been entered individually into EDB and ERA. (LTN)

none,

1980-08-01T23:59:59.000Z

59

Modeling of contact between liner finish and piston ring in internal combustion engines based on 3D measured surface  

E-Print Network [OSTI]

When decreasing of fossil fuel supplies and air pollution are two major society problems in the 21st century, rapid growth of internal combustion (IC) engines serves as a main producer of these two problems. In order to ...

Zhao, Qing, S.M. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

60

Jefferson Lab Celebrates International Year of Astronomy with...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Celebrates International Year of Astronomy with Founders of Astronomy Lecture NEWPORT NEWS, Va., Aug. 21, 2009 - Jefferson Lab will host an entertaining and educational historical...

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Apparatus and method for operating internal combustion engines from variable mixtures of gaseous fuels  

DOE Patents [OSTI]

An apparatus and method for utilizing any arbitrary mixture ratio of multiple fuel gases having differing combustion characteristics, such as natural gas and hydrogen gas, within an internal combustion engine. The gaseous fuel composition ratio is first sensed, such as by thermal conductivity, infrared signature, sound propagation speed, or equivalent mixture differentiation mechanisms and combinations thereof which are utilized as input(s) to a "multiple map" engine control module which modulates selected operating parameters of the engine, such as fuel injection and ignition timing, in response to the proportions of fuel gases available so that the engine operates correctly and at high efficiency irrespective of the gas mixture ratio being utilized. As a result, an engine configured according to the teachings of the present invention may be fueled from at least two different fuel sources without admixing constraints.

Heffel, James W. (Lake Matthews, CA); Scott, Paul B. (Northridge, CA); Park, Chan Seung (Yorba Linda, CA)

2011-11-01T23:59:59.000Z

62

A Study of the Theoretical Potential of Thermochemical Exhaust Heat Recuperation for Internal Combustion Engines  

SciTech Connect (OSTI)

We present a detailed thermodynamic analysis of thermochemical recuperation (TCR) applied to an idealized internal combustion engine with single-stage work extraction. Results for several different fuels are included. For a stoichiometric mixture of methanol and air, TCR can increase the estimated ideal engine Second Law efficiency by about 3% for constant pressure reforming and over 5% for constant volume reforming. For ethanol and isooctane the estimated Second Law efficiency increases for constant volume reforming are 9% and 11%, respectively. The Second Law efficiency improvements from TCR result primarily from the higher intrinsic exergy of the reformed fuel and pressure boost associated with gas mole increase. Reduced combustion irreversibility may also yield benefits for future implementations of combined cycle work extraction.

Chakravarthy, Veerathu K [ORNL] [ORNL; Daw, C Stuart [ORNL] [ORNL; Pihl, Josh A [ORNL] [ORNL; Conklin, Jim [ORNL] [ORNL

2010-01-01T23:59:59.000Z

63

International Year of Astronomy: Join the yearlong astronomy party  

E-Print Network [OSTI]

International Year of Astronomy: Join the yearlong astronomy party To mark the 400th anniversary are having a yearlong party.The InternationalYear of Astronomy is organized by the United Nations Educational!feature local and regional events such as public telescope viewings and public lectures, astronomy-themed plays

Pedersen, Tom

64

Black liquor combustion validated recovery boiler modeling, five-year report  

SciTech Connect (OSTI)

The objective of this project was to develop a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The project originated in October 1990 and was scheduled to run for four years. At that time, there was considerable emphasis on developing accurate predictions of the physical carryover of macroscopic particles of partially burnt black liquor and smelt droplets out of the furnace, since this was seen as the main cause of boiler plugging. This placed a major emphasis on gas flow patterns within the furnace and on the mass loss rates and swelling and shrinking rates of burning black liquor drops. As work proceeded on developing the recovery boiler furnace model, it became apparent that some recovery boilers encounter serious plugging problems even when physical carryover was minimal. After the original four-year period was completed, the project was extended to address this issue. The objective of the extended project was to improve the utility of the models by including the black liquor chemistry relevant to air emissions predictions and aerosol formation, and by developing the knowledge base and computational tools to relate furnace model outputs to fouling and plugging of the convective sections of the boilers. The work done to date includes CFD model development and validation, acquisition of information on black liquor combustion fundamentals and development of improved burning models, char bed model development, and model application and simplification.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1996-08-01T23:59:59.000Z

65

Alternative Fuel Pilot Plant & Hydrogen Internal Combustion Engine Vehicle Testing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

RESEARCH & DEVELOPMENT RESEARCH & DEVELOPMENT Science Arizona Public Service Alternative Fuel Pilot Plant & Hydrogen Internal Combustion Engine Vehicle Testing Alternative Fuel Pilot Plant The Arizona Public Service Alternative Fuel Pilot Plant is a model alternative fuel refueling system, dispensing hydrogen, compressed natural gas (CNG), and hydrogen/ CNG blends (HCNG). The plant is used daily to fuel vehicles operated in Arizona Public Service's fleet. Hydrogen Subsystem The plant's hydrogen system consists of production, compression, storage, and dispensing. The hydrogen produced is suitable for use in fuel cell-powered vehicles, for which the minimum hydrogen purity goal is 99.999%. Hydrogen is produced using an electrolysis process that separates water into hydrogen and oxygen. At present, the hydrogen is

66

Cylinder Pressures and Vibration in Internal Combustion Engine Condition G O Chandroth, A J C Sharkey and N E Sharkey  

E-Print Network [OSTI]

of sensory information. Inducing several faults in a 4 stroke diesel engine, cylinder pressure (P­stroke high speed diesel engine. The explosion of the hydrocarbon­air mixture within the complex geometryCylinder Pressures and Vibration in Internal Combustion Engine Condition Monitoring G O Chandroth

Sharkey, Amanda

67

Electric Vehicles Since the invention of the internal combustion engine in 1807 petrol and diesel vehicles have become a  

E-Print Network [OSTI]

Electric Vehicles Since the invention of the internal combustion engine in 1807 petrol and diesel and adopted. Electric vehicles (EVs) in particular are leading the charge, with car manufacturers stepping up these vehicles; the current market for electric vehicles; the results from existing pilot project; as well

Hickman, Mark

68

Combustion Engine  

Broader source: Energy.gov [DOE]

Pictured here is an animation showing the basic mechanics of how an internal combustion engine works. With support from the Energy Department, General Motors researchers developed a new technology ...

69

The Human Genome Project, a 13-year international collaborative  

E-Print Network [OSTI]

The Human Genome Project, a 13- year international collaborative effort, reached a major milestone in April 2003 with the release of the first reference sequence for the human genome. This finished sequence access by the research community to the most com- plete genome draft. Now, the finished refer- ence human

Levin, Judith G.

70

Variable oxygen/nitrogen enriched intake air system for internal combustion engine applications  

DOE Patents [OSTI]

An air supply control system for selectively supplying ambient air, oxygen enriched air and nitrogen enriched air to an intake of an internal combustion engine includes an air mixing chamber that is in fluid communication with the air intake. At least a portion of the ambient air flowing to the mixing chamber is selectively diverted through a secondary path that includes a selectively permeable air separating membrane device due a differential pressure established across the air separating membrane. The permeable membrane device separates a portion of the nitrogen in the ambient air so that oxygen enriched air (permeate) and nitrogen enriched air (retentate) are produced. The oxygen enriched air and the nitrogen enriched air can be selectively supplied to the mixing chamber or expelled to atmosphere. Alternatively, a portion of the nitrogen enriched air can be supplied through another control valve to a monatomic-nitrogen plasma generator device so that atomic nitrogen produced from the nitrogen enriched air can be then injected into the exhaust of the engine. The oxygen enriched air or the nitrogen enriched air becomes mixed with the ambient air in the mixing chamber and then the mixed air is supplied to the intake of the engine. As a result, the air being supplied to the intake of the engine can be regulated with respect to the concentration of oxygen and/or nitrogen.

Poola, Ramesh B. (Woodridge, IL); Sekar, Ramanujam R. (Naperville, IL); Cole, Roger L. (Elmhurst, IL)

1997-01-01T23:59:59.000Z

71

Diagnosis of a turbocharging system of 1 MW internal combustion engine  

Science Journals Connector (OSTI)

A diagnostic procedure is presented purposely for the turbocharging system of 1 MW internal combustion engine (I.C.E.) and specifically, for the filters and compressor modules. This study is part of a wider research activity, concerning the development of a diagnosis system dedicated to the cogenerative I.C.E. installed at the Engineering Faculty in Perugia. Firstly a 1-D thermodynamic model of the CHP engine working fluid was developed to simulate failure conditions of the turbocharging groups, which are not directly replicable on the I.C.E. to avoid plant stoppage. This model is able to simulate the degradation in performance of the engine components. It also takes into account the effect of compensation which the regulation system activates in case of efficiency loss or failure relative to filters or compressors. In order to identify and assess such failures, the fuzzy logic was chosen as the tool for the diagnosis system design. The developed diagnosis system displayed a good reliability degree with the 1-D thermodynamic model results, for operating conditions in correspondence of bad performance either on behalf of the filters or the compressor. Moreover, the procedure can be implemented in the plant monitoring system and provides in real-time diagnosis results about the status of the components and the need of maintenance, on the basis of few parameters already measured on the I.C.E.

L. Barelli; G. Bidini; F. Bonucci

2013-01-01T23:59:59.000Z

72

NREL Showcases Hydrogen Internal Combustion Engine Bus, Helps DOE Set Standards for Outreach (Fact Sheet), Hydrogen and Fuel Cell Technical Highlights (HFCTH)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

557 * November 2010 557 * November 2010 NREL Showcases Hydrogen Internal Combustion Engine Bus, Helps DOE Set Standards for Outreach National Renewable Energy Laboratory (NREL) Teams: Hydrogen Education, Melanie Caton; Market Transformation, Michael Ulsh Accomplishment: NREL started using its Ford hydrogen-powered internal combustion engine (H 2 ICE) bus in May 2010 as the primary shuttle vehicle for VIP visitors, members of the media, and new employees. As the first national laboratory to receive such a bus, NREL

73

Comparative analysis between a PEM fuel cell and an internal combustion engine driving an electricity generator: Technical, economical and ecological aspects  

Science Journals Connector (OSTI)

Abstract In the recent years the fuel cells have received much attention. Among various technologies, the Proton Exchange Membrane Fuel Cell (PEMFC) is currently the most appropriate and is used in several vehicles prototype. A comparative technical, economical and ecological analysis between an Internal Combustion Engine fueled with Diesel driving an electricity Generator (ICE-G) and a PEMFC fed by hydrogen produced by ethanol steam reforming was performed. The technical analysis showed the advantages of the PEMFC in comparison to the ICE-G based in energetic and exergetic aspects. The economic analysis shows that fuel cells are not economic competitive when compared to internal combustion engine driving an electricity generator with the same generation capacity; it will only be economically feasible in a long term; due to the large investments required. The environmental analysis was based on concepts of CO2 equivalent, pollution indicator and ecological efficiency. Different to the ICE-G system, the Fuel Cell does not emit pollutants directly and the emission related to this technology is linked mainly with hydrogen production. The ecological efficiency of PEMFC was 96% considering the carbon dioxide cycle, for ICE-G system this parameter reach 51%.

Lúcia Bollini Braga; Jose Luz Silveira; Marcio Evaristo da Silva; Einara Blanco Machin; Daniel Travieso Pedroso; Celso Eduardo Tuna

2014-01-01T23:59:59.000Z

75

The Internal Molecular Potential Between the Substituent Groups in a Benzene Ring as Derived from the Heats of Combustion  

Science Journals Connector (OSTI)

It is shown that differences in the observed heats of combustion of isomeric benzene derivatives can be interpreted as the internal molecular potential existing between their substituent groups. A like interpretation can be given for the differences between the values observed for the heats of combustion of certain nonisomeric benzene derivatives and those calculated by the rule of additivity. This internal potential, to which the attractive and repulsive forces between the groups are due, results from the electrostatic potential of the group moments (dipole effect), the polarization of the substituents and of the ring (induction effect), the dispersion effect, and from steric hindrance. We have, therefore, a new and direct method of measuring the internal potential, which determines both the internal motion of groups within an organic molecule and its most stable configuration. The values thus measured are in good agreement with values theoretically evaluated from the above intermolecular (van der Waals) forces. From the data derived by this method we conclude in the case of o-xylene that valence angles of 120° between the C—CH3 bond and the aromatic C—C bonds are extremely stable, for the energy required to distort these angles through 10° is greater than 2 K cal/mole. We find, also, very restricted rotation for the butane molecule, from which it follows that saturated aliphatic hydrocarbons in the gaseous state tend to form zigzag chains. Such restricted rotation is found for the ether molecule as well.

H. A. Stuart

1931-10-01T23:59:59.000Z

76

A cycle simulation of coal particle fueled reciprocating internal-combustion engines  

E-Print Network [OSTI]

- Summary of Experimental Diesel Engine Operation on Solid Coal Fuels Page Table 2 - Property Data for Coal (Char) Particles . . 23 Table 3 - Summary of the Combustion Model and Reaction Constants 40 Table 4 ? Specifications of the Base Case Engine... Efforts The first attempt to operate a solid particle fueled piston engine was performed nearly a century ago by Rudolf Diesel, inventor of the compression-ignition engine. Since then, at least a dozen separate attempts to oper- ate diesel engines...

Rosegay, Kenneth Harold

2012-06-07T23:59:59.000Z

77

Vehicle Technologies Office Merit Review 2014: Internal Combustion Engine Energy Retention (ICEER)  

Broader source: Energy.gov [DOE]

Presentation given by National Renewable Energy Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Internal...

78

A retrospective survey of the use of laboratory tests to simulate internal combustion engine materials tribology problems  

SciTech Connect (OSTI)

Progress in the Field of tribology strongly parallels, and has always been strongly driven by, developments and needs in transportation and related industries. Testing of candidate materials for internal combustion engine applications has historically taken several routes: (1) replacement of parts in actual engines subjected to daily use, (2) testing in special, instrumented test engines, (3) and simulative testing in laboratory tribometers using relatively simple specimens. The advantages and disadvantages of each approach are reviewed using historical examples. A four-decade, retrospective survey of the tribomaterials literature focused on the effectiveness of laboratory simulations for engine materials screening. Guidelines for designing and ducting successful tribology laboratory simulations will be discussed. These concepts were used to design a valve wear simulator at Oak Ridge National Laboratory.

Blau, P.J.

1992-12-31T23:59:59.000Z

79

Studying the Internal Ballistics of a Combustion Driven Potato Cannon using High-speed Video  

E-Print Network [OSTI]

A potato cannon was designed to accommodate several different experimental propellants and have a transparent barrel so the movement of the projectile could be recorded on high-speed video (at 2000 frames per second). Both combustion chamber and barrel were made of polyvinyl chloride (PVC). Five experimental propellants were tested: propane (C3H8), acetylene (C2H2), ethanol (C2H6O), methanol (CH4O), and butane (C4H10). The amount of each experimental propellant was calculated to approximate a stoichometric mixture and considering the Upper Flammability Limit (UFL) and the Lower Flammability Limit (LFL), which in turn were affected by the volume of the combustion chamber. Cylindrical projectiles were cut from raw potatoes so that there was an airtight fit, and each weighed 50 (+/- 0.5) grams. For each trial, position as a function of time was determined via frame by frame analysis. Five trials were taken for each experimental propellant and the results analyzed to compute velocity and acceleration as functions...

Courtney, E D S

2013-01-01T23:59:59.000Z

80

Pressure-time characterization of an internal combustion engine with sinusoidal piston travel  

SciTech Connect (OSTI)

A unique engine configuration called the Stiller-Smith Engine creates a nonconventional pressure versus time response due to the sinusoidal nature of the motion-conversion mechanism. The differences in response are due in part to the utilization of stock piston/cylinder assemblies for engineering prototypes, and the elimination of piston dwell. If all other engine considerations were equal, fuel conversion criteria would at this stage of development favor the slider-crank, but newly identified design and dynamic characteristics of the sinusoidal engine may shift the balance. To understand the differences in potential power, several analytical procedures and experimental tests have been designed to determine the changes in combustion pressure due to sinusoidal piston travel. The experimental results from these test are presented along with a qualitative analysis for future piston/cylinder design requirements.

Smith, J.; Churchill, R.; Woodrow, G.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Development of Compact Gaseous Sensors with Internal Reference for Monitoring O2 and NOx in Combustion Environments  

Broader source: Energy.gov [DOE]

Compact sensors have been developed to allow for real-time monitoring of O2 and NOx during combustion.

82

Identification of Potential Efficiency Opportunities in Internal Combustion Engines Using a Detailed Thermodynamic Analysis of Engine Simulation Results  

SciTech Connect (OSTI)

Current political and environmental concerns are driving renewed efforts to develop techniques for improving the efficiency of internal combustion engines. A detailed thermodynamic analysis of an engine and its components from a 1st and 2nd law perspective is necessary to characterize system losses and to identify efficiency opportunities. We have developed a method for performing this analysis using engine-simulation results obtained from WAVE , a commercial engine-modeling software package available from Ricardo, Inc. Results from the engine simulation are post-processed to compute thermodynamic properties such as internal energy, enthalpy, entropy, and availability (or exergy), which are required to perform energy and availability balances of the system. This analysis is performed for all major components (turbocharger, intercooler, EGR cooler, etc.) of the engine as a function of crank angle degree for the entire engine cycle. With this information, we are able to identify potential efficiency opportunities as well as guide engine experiments for exploring new technologies for recovering system losses.

Edwards, Kevin Dean [ORNL; Wagner, Robert M [ORNL; Graves, Ronald L [ORNL

2008-01-01T23:59:59.000Z

83

Definition: Combustion | Open Energy Information  

Open Energy Info (EERE)

Combustion Combustion Jump to: navigation, search Dictionary.png Combustion The process of burning; chemical oxidation accompanied by the generation of light and heat.[1][2] View on Wikipedia Wikipedia Definition "Burning" redirects here. For combustion without external ignition, see spontaneous combustion. For the vehicle engine, see internal combustion engine. For other uses, see Burning (disambiguation) and Combustion (disambiguation). Error creating thumbnail: Unable to create destination directory This article's introduction section may not adequately summarize its contents. To comply with Wikipedia's lead section guidelines, please consider modifying the lead to provide an accessible overview of the article's key points in such a way that it can stand on its own as a

84

E-Print Network 3.0 - advanced wall-fired combustion Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biomass and Animal Waste Combustion Energy Engine Emission Fuel Cells... Gasification Internal Combustion Engine Performance Pollutants Formation (NOx, Hg) and...

85

Steam reforming of n-heptane at low concentration as a means for hydrogen injection into internal combustion engines  

SciTech Connect (OSTI)

Steam reforming of n-heptane at low concentration as a means for hydrogen injection into internal combustion engines, with the aim of running the engine at a lean fuel-air ratio (to reduce emissions and improve fuel economy), was studied in laboratory flow systems with both an integral and gradientless (Berty-type) fixed-bed reactor. The reaction kinetics were determined in the gradientless reactor over a Ni/Al/sub 2/O/sub 3/ catalyst at 632/sup 0/-679/sup 0/K, 1 atm total pressure, and 0.15-1.75 kPa partial pressure of n-heptane, with a recycling ratio of over 20:1. The reaction orders in hydrogen and n-heptane were 0.22 and -0.23, respectively, and the activation energy was 83.6 kj/mole. The reactant concentrations did not satisfy the equilibrium equations for the water-gas shift and methane-steam reactions at low conversions, but the agreement was good at high conversions. A small amount of benzene was produced, which decreased with increasing temperature, probably because of the polymerization, and ultimately, carbon formation.

Sjoestroem, K.

1980-01-01T23:59:59.000Z

86

Thirty-five years of successful international cooperation in nuclear knowledge preservation: the International Nuclear Information System (INIS)  

Science Journals Connector (OSTI)

This paper describes the operations and main activities of the International Nuclear Information System (INIS), which was established 35 years ago as the international mechanism for exchanging information in the fields of peaceful uses of nuclear sciences and technology. It outlines the system's main features, users and products. International cooperation and decentralisation are the distinguishing features of this system. INIS produces, maintains and preserves Member States knowledge in these fields. The system has been instrumental in supporting national nuclear programmes, and thousands of scientists, researchers and universities students are using INIS products to retrieve current and historical nuclear information.

Taghrid Atieh; Robert Workman

2006-01-01T23:59:59.000Z

87

U.S. DEPARTMENT OF ENERGY Internal Control Evaluations Fiscal Year 2013 Guidance  

Broader source: Energy.gov (indexed) [DOE]

Issued April 5, 2013 Issued April 5, 2013 U.S. DEPARTMENT OF ENERGY Internal Control Evaluations Fiscal Year 2013 Guidance Page | 2 Issued April 5, 2013 Table of Contents I. Introduction .............................................................................................................................................. 4 A. Background .......................................................................................................................................... 4 B. Purpose ............................................................................................................................................... 4 C. Benefits of Performing Internal Controls Evaluations ........................................................................ 6

88

Comparison of 50-year and 70-year internal-dose-conversion factors  

SciTech Connect (OSTI)

The 50-year inhalation and ingestion dose commitments associated with an acute intake (of a radionuclide) of 3.7 x 10/sup 4/ Bq (1 ..mu..Ci) in one day were compared with the corresponding dose commitments calculated for a 70-year integration period resulting from a chronic intake of the same amount at a rate of 101 Bq/d (0.00274 ..mu..Ci/d) for one year. These values, known as dose conversion factors, estimate the dose accumulated during a given period of time following a unit of intake of a radionuclide. It was demonstrated that the acute intake of 3.7 x 10/sup 4/ Bq in one day and the chronic intake of 101 Bq/d for one year (a total intake of 3.7 x 10/sup 4/ Bq) result in essentially the same dose commitment for a relatively long integration period. Therefore, the comparison of 50-year acute dose conversion factors and 70-year chronic dose conversion factors is essentially only a measure of the additional dose accumulated in the 50 to 70 year period. It was found that for radionuclides with atomic mass less than 200 the percent difference in the 70-year and 50-year dose conversion factors was essentially zero in most cases. Differences of approximately 5 to 50% were obtained for dose conversion factors for most alpha emitters with atomic masses of greater than 200. Comparisons were made on the basis of both organ dose equivalent and effective dose equivalent. The implications and significance of these results are discussed.

Ryan, M.T.; Dunning, D.E. Jr.

1981-03-01T23:59:59.000Z

89

Some recent advances in droplet combustion  

Science Journals Connector (OSTI)

This paper reviews the theoretical and experimental advances in droplet combustion since the 1982 Second International Colloquium on Drops and Bubbles. Specific topics discussed include multicomponent droplet combustion and microexplosion convection droplet combustion the combustion of slurries propellants and hazardous wastes soot formation in droplet burning and several miscellaneous subjects. Areas of further research are suggested.

C. K. Law

1990-01-01T23:59:59.000Z

90

Culmination of the Four-Year Effort: Office of International Material  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Culmination of the Four-Year Effort: Office of International Material Culmination of the Four-Year Effort: Office of International Material Protection and Control | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA Blog > Culmination of the Four-Year Effort: Office of ... Culmination of the Four-Year Effort: Office of International Material

91

A comparative study of the Stiller-Smith and slider-crank mechanisms for eight-cylinder internal combustion engine use  

SciTech Connect (OSTI)

This paper reports that the possible alternatives to the slider-crank for internal combustion engine use, the Scotch yoke in its various forms and inversions has received considerable attention. Among these, the Stiller-Smith mechanism has shown promise as being a viable option. Kinetostatic models were formulated to determine loading within similar eight-cylinder, four-stroke, compression-ignition engines with emphasis placed on comparing the number and similarity of mechanism components, implications of component and linkage motions, the loading experienced by similar bearing surfaces, and the friction losses of specific components.

Smith, J.E.; Smith, J.C.; McKisic, A.D. (Mechanical and Aerospace Engineering, West Virginia Univ., Morgantown, WV (US))

1991-07-01T23:59:59.000Z

92

Combustion of high-sulfur coal and anthracite wastes in a rotary kiln combustor with an advanced internal air distributor  

SciTech Connect (OSTI)

Fluid bed combustors have received extensive testing with both high-sulfur coal and anthracite wastes. Rotary kilns are effective and popular devices for waste combustion. The Angelo Rotary Furnace{trademark} has been developed to improve the operation of rotary pyrolyzer/combustor systems through enhanced air distribution, which in this process is defined as staged, swirled combustion air injection. Fourteen of these new furnaces have been installed worldwide. Two units in Thailand, designed for rice hull feed with occasional lignite feed, have been recently started up. An older unit in Pennsylvania is being upgraded with a new, more advanced air distribution system for a series of tests this fall in which inexpensive high-sulfur coal and anthracite wastes will be fired with limestone. The purposes of these tests are to determine the burning characteristics of these two fuels in this system, to discover the Ca/S ratios necessary for operation of a rotary kiln combusting these fuels, and to observe the gas-borne emissions from the furnace. An extensive preliminary design study will be performed on a commercial installation for combustion of anthracite wastes. 14 refs., 5 figs., 1 tab.

Cobb, J.T. Jr. (Pittsburgh Univ., PA (USA)); Ahn, Y.K. (Gilbert/Commonwealth, Inc., Reading, PA (USA)); Angelo, J.F. (Universal Energy International, Inc., Little Rock, AR (USA))

1990-01-01T23:59:59.000Z

93

Thermal ignition combustion system  

SciTech Connect (OSTI)

A thermal ignition combustion system adapted for use with an internal combustion engine is described comprising: (a) means for providing ignition chamber walls defining an ignition chamber, the chamber walls being made of a material having a thermal conductivity greater than 20 W/m/sup 0/C. and a specific heat greater than 480J/kg/sup 0/C., the ignition chamber being in constant communication with the main combustion chamber; (b) means for maintaining the temperature of the chamber walls above a threshold temperature capable of causing ignition of a fuel; and (c) means for conducting fuel to the ignition chamber.

Kamo, R.; Kakwani, R.M.; Valdmanis, E.; Woods, M.E.

1988-04-19T23:59:59.000Z

94

Coal Combustion Science  

SciTech Connect (OSTI)

The objective of this activity is to support the Office of Fossil Energy in executing research on coal combustion science. This activity consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency Coal Combustion Science Project. Specific tasks for this activity include: (1) coal devolatilization - the objective of this risk is to characterize the physical and chemical processes that constitute the early devolatilization phase of coal combustion as a function of coal type, heating rate, particle size and temperature, and gas phase temperature and oxidizer concentration; (2) coal char combustion -the objective of this task is to characterize the physical and chemical processes involved during coal char combustion as a function of coal type, particle size and temperature, and gas phase temperature and oxygen concentration; (3) fate of mineral matter during coal combustion - the objective of this task is to establish a quantitative understanding of the mechanisms and rates of transformation, fragmentation, and deposition of mineral matter in coal combustion environments as a function of coal type, particle size and temperature, the initial forms and distribution of mineral species in the unreacted coal, and the local gas temperature and composition.

Hardesty, D.R. (ed.); Fletcher, T.H.; Hurt, R.H.; Baxter, L.L. (Sandia National Labs., Livermore, CA (United States))

1991-08-01T23:59:59.000Z

95

most are government agencies --local, national and international. A ten-year industry forecast put together  

E-Print Network [OSTI]

most are government agencies -- local, national and international. A ten-year industry forecast put environmental, civil government, defence and security, and transportation as the most active market segments combine geographic information systems with satellite data are in demand in a variety of disciplines

Wisconsin at Madison, University of

96

Advanced Combustion Engine R&D: Goals, Strategies, and Top Accomplishments  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Although internal combustion engines have been used Although internal combustion engines have been used for more than a century, significant improvements in energy efficiency and emissions reduction are still possible. In fact, boosting the efficiency of internal combustion engines is one of the most promising and cost-effective approaches to increasing vehicle fuel economy over the next 30 years. The United States can cut its transportation fuel use 20%-40% through commercialization of advanced engines-resulting in greater economic, environmental, and energy security. Using these engines in hybrid and plug-in hybrid electric vehicles will enable even greater fuel savings benefits. The Advanced Combustion Engine R&D subprogram of the U.S. Department of Energy's Vehicle Technologies Program (VTP) is improving the fuel economy of

97

Research Teams - Combustion Energy Frontier Research Center  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Teams Research Teams Associates Greg Smith, Senior Research Chemist, SRI International Jeffrey A. Sutton, Assistant Professor, Ohio State Univeristy Combustion Energy...

98

MN Center for Renewable Energy: Cellulosic Ethanol, Optimization of Bio-fuels in Internal Combustion Engines, & Course Development for Technicians in These Areas  

SciTech Connect (OSTI)

This final report for Grant #DE-FG02-06ER64241, MN Center for Renewable Energy, will address the shared institutional work done by Minnesota State University, Mankato and Minnesota West Community and Technical College during the time period of July 1, 2006 to December 30, 2008. There was a no-cost extension request approved for the purpose of finalizing some of the work. The grant objectives broadly stated were to 1) develop educational curriculum to train technicians in wind and ethanol renewable energy, 2) determine the value of cattails as a biomass crop for production of cellulosic ethanol, and 3) research in Optimization of Bio-Fuels in Internal Combustion Engines. The funding for the MN Center for Renewable Energy was spent on specific projects related to the work of the Center.

John Frey

2009-02-22T23:59:59.000Z

99

Combustion Safety Overview  

Broader source: Energy.gov (indexed) [DOE]

March 1-2, 2012 March 1-2, 2012 Building America Stakeholders Meeting Austin, Texas Combustion Safety in the Codes Larry Brand Gas Technology Institute Acknowledgement to Paul Cabot - American Gas Association 2 | Building America Program www.buildingamerica.gov Combustion Safety in the Codes Widely adopted fuel gas codes: * National Fuel Gas Code - ANSI Z223.1/NFPA 54, published by AGA and NFPA (NFGC) * International Fuel Gas Code - published by the International Code Council (IFGC) * Uniform Plumbing Code published by IAPMO (UPC) Safety codes become requirements when adopted by the Authority Having Jurisdiction (governments or fire safety authorities) 3 | Building America Program www.buildingamerica.gov Combustion Safety in the Codes Formal Relationships Between these codes: - The IFGC extracts many safety

100

Advanced Combustion  

SciTech Connect (OSTI)

Topics covered in this presentation include: the continued importance of coal; related materials challenges; combining oxy-combustion & A-USC steam; and casting large superalloy turbine components.

Holcomb, Gordon R. [NETL

2013-03-05T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Spontaneous Human Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Spontaneous Human Combustion Spontaneous Human Combustion Name: S. Phillips. Age: N/A Location: N/A Country: N/A Date: N/A Question: One of our 8th grade students has tried to find information in our library about spontaneous human combustion, but to no avail. Could you tell us where we might locate a simple reference, or provide some in information about this subject for him. Replies: Sorry, but this is definitely "fringe science"...try asking in bookstores. I seem to recall one of those "believe it or not" type of TV shows did an episode on spontaneous human combustion a few years ago in which they reported on some British scientists who investigated this purported phenomenon. Remember that people (back in the Dark Ages, and before) used to believe in "spontaneous generation" of certain plants and animals because they were not aware of the reproduction methods used by those plants and animals.

102

Sandia Combustion Research Program  

SciTech Connect (OSTI)

During the late 1970s, in response to a national energy crisis, Sandia proposed to the US Department of Energy (DOE) a new, ambitious program in combustion research. Shortly thereafter, the Combustion Research Facility (CRF) was established at Sandia's Livermore location. Designated a ''user facility,'' the charter of the CRF was to develop and maintain special-purpose resources to support a nationwide initiative-involving US inventories, industry, and national laboratories--to improve our understanding and control of combustion. This report includes descriptions several research projects which have been simulated by working groups and involve the on-site participation of industry scientists. DOE's Industry Technology Fellowship program, supported through the Office of Energy Research, has been instrumental in the success of some of these joint efforts. The remainder of this report presents results of calendar year 1988, separated thematically into eleven categories. Referred journal articles appearing in print during 1988 and selected other publications are included at the end of Section 11. Our traditional'' research activities--combustion chemistry, reacting flows, diagnostics, engine and coal combustion--have been supplemented by a new effort aimed at understanding combustion-related issues in the management of toxic and hazardous materials.

Johnston, S.C.; Palmer, R.E.; Montana, C.A. (eds.)

1988-01-01T23:59:59.000Z

103

Combustion Noise  

E-Print Network [OSTI]

stabilize or destabilize the modes of the system, depending on the configuration of the combustor and the form of the coupling [26, 30]. In contrast to combustion instability, in broad-band combustion noise the unsteadiness in the rate of combustion... from th s in a mod on tempera , entropic a de of indir t frequenci r, open que sical theory assical expe s [14] who it by a spa d a transie le gases. A e bubble si idered as a flame was ent was o ng and dif depended udy it wa ion, ? ?,p r t? : (a...

Dowling, Ann P.; Mahmoudi, Yasser

2014-01-01T23:59:59.000Z

104

Method of combustion for dual fuel engine  

DOE Patents [OSTI]

Apparatus and a method of introducing a primary fuel, which may be a coal water slurry, and a high combustion auxiliary fuel, which may be a conventional diesel oil, into an internal combustion diesel engine comprises detecting the load conditions of the engine, determining the amount of time prior to the top dead center position of the piston to inject the main fuel into the combustion chamber, and determining the relationship of the timing of the injection of the auxiliary fuel into the combustion chamber to achieve a predetermined specific fuel consumption, a predetermined combustion efficiency, and a predetermined peak cylinder firing pressure. 19 figures.

Hsu, B.D.; Confer, G.L.; Zujing Shen; Hapeman, M.J.; Flynn, P.L.

1993-12-21T23:59:59.000Z

105

Method of combustion for dual fuel engine  

DOE Patents [OSTI]

Apparatus and a method of introducing a primary fuel, which may be a coal water slutty, and a high combustion auxiliary fuel, which may be a conventional diesel oil, into an internal combustion diesel engine comprises detecting the load conditions of the engine, determining the amount of time prior to the top dead center position of the piston to inject the main fuel into the combustion chamber, and determining the relationship of the timing of the injection of the auxiliary fuel into the combustion chamber to achieve a predetermined specific fuel consumption, a predetermined combustion efficiency, and a predetermined peak cylinder firing pressure.

Hsu, Bertrand D. (Erie, PA); Confer, Gregory L. (Erie, PA); Shen, Zujing (Erie, PA); Hapeman, Martin J. (Edinboro, PA); Flynn, Paul L. (Fairview, PA)

1993-12-21T23:59:59.000Z

106

Classical combustion diagnostics for engine research  

SciTech Connect (OSTI)

The use of engine diagnostic techniques in research on the reciprocating internal combustion engine has contributed substantially to engine progress over the years. Many of these techniques were developed before the advent of the laser, and most engine research still uses these classical methods. This paper provides historical snapshots of efforts to understand flame propagation and knock in homogeneous-charge engines, and fuel-air mixing and some of its ramifications in diesels. Such a review demonstrates the accomplishments facilitated by measurement of pressure, temperature, fluid motions, and chemistry within the cylinder. A critique of these classical diagnostics is then offered.

Amann, C.A.

1985-01-01T23:59:59.000Z

107

Pulse combustion  

Science Journals Connector (OSTI)

Pulse combustion has been gaining increased interest because of its potential for higher combustion efficiency greater combustion intensity and lower pollutant emissions. Unsteady combustion causes increased mass momentum and heat transfer. As a result reactants mix faster heat release is accelerated and heat transfer is enhanced in unsteady reacting flows. Many of these phenomena were discovered long ago by engineers looking for the cause of often detrimental combustion instabilities. Much more recently some of these enhanced transfer properties have been used to design efficient and compact pulse combustors. Although to date successful commercialization on a large scale has been limited to home heating units (e.g. the Lenox Pulse Furnace) highly efficient pulse spray dryers (Bepex Unison Dryer) pulse calciners and pulse waste incinerators have been designed. Pulsations have also been applied to carbon black fluidized bed gasifiers. Not all these designs will become economically viable. However the development of tunable pulse combustors that can be acoustically matched to the changing resonance frequency of these pulse processes have made many of them more promising. Recent findings that pulsation can enhance burning even in turbulent flows lend further encouragement to the developers of novel pulse combustion devices.

Jechiel I. Jagoda

2000-01-01T23:59:59.000Z

108

YEAR  

National Nuclear Security Administration (NNSA)

96 YEAR 2013 Males 69 Females 27 YEAR 2013 SES 1 EJEK 9 EN 04 27 NN (Engineering) 26 NQ (ProfTechAdmin) 30 NU (TechAdmin Support) 3 YEAR 2013 American Indian Alaska Native Male...

109

COMBUSTION RESEARCH - FY-1979  

E-Print Network [OSTI]

deposition due to the heat of combustion. The problem wedimensionless heat of combustion, QpYoxoolhw t transferredfraction of specie i heat of combustion per gram of fuel

,

2012-01-01T23:59:59.000Z

110

Advanced Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Systems Advanced Combustion Background Conventional coal-fired power plants utilize steam turbines to generate electricity, which operate at efficiencies of 35-37 percent. Operation at higher temperatures and pressures can lead to higher efficiencies, resulting in reduced fuel consumption and lower greenhouse gas emissions. Higher efficiency also reduces CO2 production for the same amount of energy produced, thereby facilitating a reduction in greenhouse gas emissions. When combined, oxy-combustion comes with an efficiency hit, so it will actually increase the amount of CO2 to be captured. But without so much N2 in the flue gas, it will be easier and perhaps more efficient to capture, utilize and sequester. NETL's Advanced Combustion Project and members of the NETL-Regional University

111

History of the International Atomic Energy Agency: The First Forty Years  

Science Journals Connector (OSTI)

International Atomic Energy Agency: Personal Reflections 1997 (Vienna: IAEA) 311 pp AS260 (hardback) ISBN 92 0 102497 5 These two books are a contribution to the 40th birthday celebrations of the IAEA. I have worked in the field of Health Physics for 39 of those years, and have contributed to projects for the Agency during that time so these volumes are a nostalgic journey into my past as well. The focus of the History of the IAEA is the intimate linkage to nuclear power. Accidents such as Three Mile Island and Chernobyl have had major impacts on the Agency's programme and the evolution of arms' controls that has affected IAEA safeguards. The IAEA has greatly influenced the practical applications of nuclear science and many examples are discussed in the history. The Personal Reflections are from 25 distinguished scientists and diplomats who have contributed to the formation and development of the IAEA. The IAEA is an Agency of the United Nations (UN) with origins back to 1946 when the USA proposed the UN Atomic Energy Commission (UNAEC). The Soviet Union, although a participant in the UNAEC discussions, never agreed to the US proposals and UNAEC was eventually disbanded in 1952. In 1953, President Eisenhower made his `Atoms for Peace' speech and proposed a joint contribution to a UN agency of natural uranium and fissionable materials. In 1955, the USA started drafting the Statutes for an `IAEA' and these were accepted by a conference of 82 states at the UN. The Agency's Preparatory Commission started work in February 1957: the first Director General, Dr Stirling Cole (USA), was in post by the middle of that year. Euratom was formed in the same year. International regulations on the safe transport of radioactive waste were drafted and safeguard inspections were started at a research reactor in Norway. The first IAEA Basic Safety Standards for Radiation were agreed by the Agency's Board in June 1962. Following the Cuban Missile Crisis, a Partial Test Ban Treaty was negotiated between the USA and the USSR and the Agency extended its safeguards' systems to large reactors. The rest of the 1960s saw a gradual move towards non-proliferation and the application of nuclear and radiation technologies in the fields of agriculture, medicine and industry, particularly in developing countries. The year 1970 saw the instigation of the first bibliographic database INIS with distribution by computer tapes and microfiche. The 1973 oil crisis put energy issues at the top of the world's agenda and prospects for Nuclear Energy as a source of power brightened. The IAEA established a network of secondary standards laboratories in 1976 with the formation of a global network of analytical laboratories in the previous year. Up until 1979, the Agency had occupied the former Grand Hotel on the Ringstrasse that was spacious for working, with a well-equipped main conference hall that was often too small for large conferences but always convenient for the hotels in the centre of Vienna. In that year, the Agency moved to the Vienna International Centre on the Danube. Occupation of this new Centre was made possible by the generosity of the city of Vienna and the Austrian government. The Three Mile Island nuclear accident happened on 28 March 1979, and whilst the release of radioactivity was insignificant, the economic impact was huge with global implications for developments of nuclear power. The French-built Tamuz nuclear research reactor in Iraq was attacked by Israel in June 1981 because it was suspected that it was being used for nuclear weapons research. This presented an immediate challenge to the new Director General, Dr Hans Blix. However, the main event of the 1980s was the Chernobyl accident on 26 April 1986. Unit 4 of the reactor complex was completely destroyed, operators were killed and radioactivity was spread over large areas of Europe. The IAEA was central in organising the response to the accident and set up the Emergency Response System based upon their experiences. Also there was a series of accidents in the following years, often ass

J A B Gibson

1998-01-01T23:59:59.000Z

112

Turbulent combustion  

SciTech Connect (OSTI)

Turbulent combustion is the dominant process in heat and power generating systems. Its most significant aspect is to enhance the burning rate and volumetric power density. Turbulent mixing, however, also influences the chemical rates and has a direct effect on the formation of pollutants, flame ignition and extinction. Therefore, research and development of modern combustion systems for power generation, waste incineration and material synthesis must rely on a fundamental understanding of the physical effect of turbulence on combustion to develop theoretical models that can be used as design tools. The overall objective of this program is to investigate, primarily experimentally, the interaction and coupling between turbulence and combustion. These processes are complex and are characterized by scalar and velocity fluctuations with time and length scales spanning several orders of magnitude. They are also influenced by the so-called {open_quotes}field{close_quotes} effects associated with the characteristics of the flow and burner geometries. The authors` approach is to gain a fundamental understanding by investigating idealized laboratory flames. Laboratory flames are amenable to detailed interrogation by laser diagnostics and their flow geometries are chosen to simplify numerical modeling and simulations and to facilitate comparison between experiments and theory.

Talbot, L.; Cheng, R.K. [Lawrence Berkeley Laboratory, CA (United States)

1993-12-01T23:59:59.000Z

113

Combustion & Health  

E-Print Network [OSTI]

FFCOMBUSTION & HEALTH Winifred J. Hamilton, PhD, SM Clear Air Through Energy Efficiency (CATEE) Galveston, TX October 9?11, 2012 FFCOMBUSTION & HEALTH FFCOMBUSTION: THE THREAT ? Biggest threat to world ecosystems (and to human health...) ? Combustion of fossil fuels for ? Electricity ? Industrial processes ? Vehicle propulsion ? Cooking and heat ? Other ? Munitions ? Fireworks ? Light ? Cigarettes, hookahs? FFCOMBUSTION & HEALTH FFCOMBUSTION: THE THREAT ? SCALE (think health...

Hamilton, W.

2012-01-01T23:59:59.000Z

114

Method and system for controlled combustion engines  

DOE Patents [OSTI]

A system for controlling combustion in internal combustion engines of both the Diesel or Otto type, which relies on establishing fluid dynamic conditions and structures wherein fuel and air are entrained, mixed and caused to be ignited in the interior of a multiplicity of eddies, and where these structures are caused to sequentially fill the headspace of the cylinders.

Oppenheim, A. K. (Berkeley, CA)

1990-01-01T23:59:59.000Z

115

YEAR  

National Nuclear Security Administration (NNSA)

2540 YEAR 2013 Males 1677 Females 863 YEAR 2013 SES 102 EX 3 SL 1 EJEK 89 EN 05 41 EN 04 170 EN 03 18 NN (Engineering) 448 NQ (ProfTechAdmin) 1249 NU (TechAdmin Support) 76 NV...

116

Stretch Efficiency for Combustion Engines: Exploiting New Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Stretch Efficiency for Combustion Engines: Exploiting New Combustion Regimes Stretch Efficiency for Combustion Engines: Exploiting New Combustion Regimes 2012 DOE Hydrogen and Fuel...

117

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Broader source: Energy.gov (indexed) [DOE]

Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and...

118

Combustion Control  

E-Print Network [OSTI]

using a liquid fuel. The air and fuel valve designs are vastly different, with different flow characteristics. These factors make the initial adjustment of the system difficult, and proper maintenance of ratio accuracy unlikely. Linked valves... casing of the fuel control regulator with the combustion air piping. The upstream pressure on the burner air orifice is applied to the main diaphragm of the pressure balanced regulator. Assuming sufficient gas pressure at the regulator inlet...

Riccardi, R. C.

1984-01-01T23:59:59.000Z

119

Yearly  

E-Print Network [OSTI]

In 2009, a new activity was launched under the International Energy Agency Wind Implementing Agreement (IEA Wind) for the small wind sector. The main focus of this activity, called Task 27, is to develop recommended practices for consumer labeling of existing commercial small wind turbines. Participants will also exchange information about the status of the small wind industry in the member countries. This report outlines the status of the small wind sector in 2009 in the countries participating in Task 27. (For more information about IEA Wind and the consumer label developed under Task 27, see www.ieawind.org.)

unknown authors

2009-01-01T23:59:59.000Z

120

Vehicle Technologies Office: Advanced Combustion Engines  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Combustion Engines Combustion Engines Improving the efficiency of internal combustion engines is one of the most promising and cost-effective near- to mid-term approaches to increasing highway vehicles' fuel economy. The Vehicle Technologies Office's research and development activities address critical barriers to commercializing higher efficiency, very low emissions advanced internal combustion engines for passenger and commercial vehicles. This technology has great potential to reduce U.S. petroleum consumption, resulting in greater economic, environmental, and energy security. Already offering outstanding drivability and reliability to over 230 million passenger vehicles, internal combustion engines have the potential to become substantially more efficient. Initial results from laboratory engine tests indicate that passenger vehicle fuel economy can be improved by more than up to 50 percent, and some vehicle simulation models estimate potential improvements of up to 75 percent. Advanced combustion engines can utilize renewable fuels, and when combined with hybrid electric powertrains could have even further reductions in fuel consumption. As the EIA reference case forecasts that by 2035, more than 99 percent of light- and heavy-duty vehicles sold will still have internal combustion engines, the potential fuel savings is tremendous.

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Sandia Combustion Research Program: Annual report, 1986  

SciTech Connect (OSTI)

This report presents research results of the past year, divided thematically into some ten categories. Publications and presentations arising from this work are included in the appendix. Our highlighted accomplishment of the year is the announcement of the discovery and demonstration of the RAPRENOx process. This new mechanism for the elimination of nitrogen oxides from essentially all kinds of combustion exhausts shows promise for commercialization, and may eventually make a significant contribution to our nation's ability to control smog and acid rain. The sections of this volume describe the facility's laser and computer system, laser diagnostics of flames, combustion chemistry, reacting flows, liquid and solid propellant combustion, mathematical models of combustion, high-temperature material interfaces, studies of engine/furnace combustion, coal combustion, and the means of encouraging technology transfer. 182 refs., 170 figs., 12 tabs.

Not Available

1986-01-01T23:59:59.000Z

122

YEAR  

National Nuclear Security Administration (NNSA)

1 1 YEAR 2011 Males 18 Females 23 YEAR 2011 SES 2 EJ/EK 2 NQ (Prof/Tech/Admin) 35 NU (Tech/Admin Support) 2 YEAR 2011 American Indian Male 1 American Indian Female 2 African American Male 3 African American Female 9 Asian Male 0 Asian Female 0 Hispanic Male 2 Hispanic Female 6 White Male 12 White Female 6 DIVERSITY Workforce Diversity Associate Administrator for Information Management & Chief Information Officer, NA-IM As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 18 43.9% 23 56.1% Gender Males Females 4.9% 4.9% 85.4% 4.9% Pay Plan SES EJ/EK NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 2.4% 4.9% 7.3% 22.0% 0.0% 0.0% 4.9% 14.6% 29.3% 14.6% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male

123

YEAR  

National Nuclear Security Administration (NNSA)

4 4 YEAR 2011 Males 21 Females 23 YEAR 2011 SES 3 EJ/EK 1 EN 03 1 NN (Engineering) 3 NQ (Prof/Tech/Admin) 31 NU (Tech/Admin Support) 5 YEAR 2011 American Indian Male 0 American Indian Female 0 African American Male 1 African American Female 2 Asian Male 1 Asian Female 1 Hispanic Male 6 Hispanic Female 10 White Male 13 White Female 10 DIVERSITY Workforce Diversity Office of General Counsel, NA-GC As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 21 47.7% 23 52.3% Gender Males Females 6.8% 2.3% 2.3% 6.8% 70.5% 11.4% Pay Plan SES EJ/EK EN 03 NN (Engineering) NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 0.0% 0.0% 2.3% 4.5% 2.3% 2.3% 13.6% 22.7% 29.5% 22.7% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male

124

YEAR  

National Nuclear Security Administration (NNSA)

6 6 YEAR 2011 Males 7 Females 9 YEAR 2011 SES 1 NQ (Prof/Tech/Admin) 9 GS 15 2 GS 13 2 GS 12 1 GS 11 1 YEAR 2011 American Indian Male 0 American Indian Female 0 African American Male 1 African American Female 3 Asian Male 1 Asian Female 0 Hispanic Male 1 Hispanic Female 0 White Male 4 White Female 6 DIVERSITY Workforce Diversity Associate Administrator of External Affairs, NA-EA As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 7 43.8% 9 56.3% Gender Males Females 6.3% 56.3% 12.5% 12.5% 6.3% 6.3% Pay Plan SES NQ (Prof/Tech/Admin) GS 15 GS 13 GS 12 GS 11 0.0% 0.0% 6.3% 18.8% 6.3% 0.0% 6.3% 0.0% 25.0% 37.5% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male Asian Female Hispanic Male Hispanic Female White Male White Female FY11 Workforce Diversity

125

YEAR  

National Nuclear Security Administration (NNSA)

40 40 YEAR 2011 Males 68 Females 72 YEAR 2011 SES 5 EJ/EK 1 NN (Engineering) 16 NQ (Prof/Tech/Admin) 115 NU (Tech/Admin Support) 3 YEAR 2011 American Indian Male 1 American Indian Female 2 African American Male 3 African American Female 7 Asian Male 4 Asian Female 0 Hispanic Male 25 Hispanic Female 26 White Male 35 White Female 37 DIVERSITY Workforce Diversity Associate Administrator for Acquistion & Project Management, NA-APM As of Sep 24, 2011 PAY PLAN TOTAL WORKFORCE GENDER 68 48.6% 72 51.4% Gender Males Females 3.6% 0.7% 11.4% 82.1% 2.1% Pay Plan SES EJ/EK NN (Engineering) NQ (Prof/Tech/Admin) NU (Tech/Admin Support) 0.7% 1.4% 2.1% 5.0% 2.9% 0.0% 17.9% 18.6% 25.0% 26.4% Race and Gender American Indian Male American Indian Female African American Male African American Female Asian Male

126

Black liquor combustion validated recovery boiler modeling: Final year report. Volume 1 (Main text and Appendix I, sections 1--4)  

SciTech Connect (OSTI)

This project was initiated in October 1990, with the objective of developing and validating a new computer model of a recovery boiler furnace using a computational fluid dynamics (CFD) code specifically tailored to the requirements for solving recovery boiler flows, and using improved submodels for black liquor combustion based on continued laboratory fundamental studies. The key tasks to be accomplished were as follows: (1) Complete the development of enhanced furnace models that have the capability to accurately predict carryover, emissions behavior, dust concentrations, gas temperatures, and wall heat fluxes. (2) Validate the enhanced furnace models, so that users can have confidence in the predicted results. (3) Obtain fundamental information on aerosol formation, deposition, and hardening so as to develop the knowledge base needed to relate furnace model outputs to plugging and fouling in the convective sections of the boiler. (4) Facilitate the transfer of codes, black liquid submodels, and fundamental knowledge to the US kraft pulp industry. Volume 1 contains the main body of the report and the first 4 sections of Appendix 1: Modeling of black liquor recovery boilers -- summary report; Flow and heat transfer modeling in the upper furnace of a kraft recovery boiler; Numerical simulation of black liquor combustion; and Investigation of turbulence models and prediction of swirling flows for kraft recovery furnaces.

Grace, T.M.; Frederick, W.J.; Salcudean, M.; Wessel, R.A.

1998-08-01T23:59:59.000Z

127

Years  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and Technology in and Technology in the National Interest 60 Years of Excellence Lawrence Livermore National Laboratory FY 2012 Annual Report About the Cover: Lawrence Livermore National Laboratory (LLNL) engineers Chris Spadaccini (left) and Eric Duoss are shown experimenting with direct ink-writing to create micro- to macroscale structures with extreme precision. The Laboratory is advancing this process and other additive manufacturing technologies to develop new materials with extraordinary properties for use in a wide range of national-security and other applications. About the Laboratory: Lawrence Livermore National Laboratory was founded in 1952 to enhance the security of the United States by advancing nuclear weapons science and technology. With a talented and dedicated workforce and

128

Sandia National Laboratories: Sandia Expands an International...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ClimateECAbout ECFacilitiesCRFSandia Expands an International Collaboration and Web Database on Engine Fuel Spray Combustion Research Sandia Expands an International Collaboration...

129

Combustion chemistry  

SciTech Connect (OSTI)

This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

1993-12-01T23:59:59.000Z

130

Inspection of Nickel Alloy Welds: Results from Five Year International Program  

SciTech Connect (OSTI)

The U.S. Nuclear Regulatory Commission established and coordinated the international Program for the Inspection of Nickel alloy Components (PINC). The goal of PINC was to evaluate the capabilities of various nondestructive examination (NDE) techniques to detect and characterize primary water stress corrosion cracking (PWSCC) in dissimilar metal welds. Round-robin results showed that a combination of conventional and phased-array ultrasound provide the highest performance for flaw detection and depth sizing in dissimilar metal piping welds. The effective detection of flaws in bottom-mounted instrumentation penetrations by eddy current and ultrasound shows that it may be possible to reliably inspect these components in the field.

Prokofiev, Iouri; Cumblidge, Stephen E.; Doctor, Steven R.

2011-06-23T23:59:59.000Z

131

Combustion Timing Control of Natural Gas HCCI Engines Using Physics-Based Modeling and LQR Controller  

E-Print Network [OSTI]

Homogeneous Charge Compression Ignition (HCCI) Engines hold promises of being the next generation of internal combustion engines due to their ability to produce high thermal efficiencies and low emission levels. HCCI combustion is achieved through...

Abdelgawad, Marwa

2012-07-16T23:59:59.000Z

132

Stretch Efficiency for Combustion Engines: Exploiting New Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. ace15daw.pdf More Documents & Publications Stretch Efficiency for Combustion Engines: Exploiting New Combustion Regimes Stretch Efficiency for Combustion Engines:...

133

Combustion Byproducts Recycling Consortium  

SciTech Connect (OSTI)

Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, 'clean coal' combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered 'allowable' under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and private-sector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

2008-08-31T23:59:59.000Z

134

Combustion Byproducts Recycling Consortium  

SciTech Connect (OSTI)

Each year, over 100 million tons of solid byproducts are produced by coal-burning electric utilities in the United States. Annual production of flue gas desulfurization (FGD) byproducts continues to increase as the result of more stringent sulfur emission restrictions. In addition, stricter limits on NOx emissions mandated by the 1990 Clean Air Act have resulted in utility burner/boiler modifications that frequently yield higher carbon concentrations in fly ash, which restricts the use of the ash as a cement replacement. Controlling ammonia in ash is also of concern. If newer, “clean coal” combustion and gasification technologies are adopted, their byproducts may also present a management challenge. The objective of the Combustion Byproducts Recycling Consortium (CBRC) is to develop and demonstrate technologies to address issues related to the recycling of byproducts associated with coal combustion processes. A goal of CBRC is that these technologies, by the year 2010, will lead to an overall ash utilization rate from the current 34% to 50% by such measures as increasing the current rate of FGD byproduct use and increasing in the number of uses considered “allowable” under state regulations. Another issue of interest to the CBRC would be to examine the environmental impact of both byproduct utilization and disposal. No byproduct utilization technology is likely to be adopted by industry unless it is more cost-effective than landfilling. Therefore, it is extremely important that the utility industry provide guidance to the R&D program. Government agencies and privatesector organizations that may be able to utilize these materials in the conduct of their missions should also provide input. The CBRC will serve as an effective vehicle for acquiring and maintaining guidance from these diverse organizations so that the proper balance in the R&D program is achieved.

Ziemkiewicz, Paul; Vandivort, Tamara; Pflughoeft-Hassett, Debra; Chugh, Y Paul; Hower, James

2008-08-31T23:59:59.000Z

135

Advanced Combustion | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Combustion Advanced Combustion Combustion engines drive a large percentage of our nation's transportation vehicles and power generation and manufacturing facilities. Today's...

136

Combustion Turbine CHP System for Food Processing Industry -...  

Office of Environmental Management (EM)

congestion on the constrained Northeast power grid. The fact sheet contains performance data from the plant after one year of operation. Combustion Turbine CHP System for Food...

137

CO2 Emissions from Fuel Combustion | Open Energy Information  

Open Energy Info (EERE)

CO2 Emissions from Fuel Combustion CO2 Emissions from Fuel Combustion Jump to: navigation, search Tool Summary Name: CO2 Emissions from Fuel Combustion Agency/Company /Organization: International Energy Agency Sector: Energy Topics: Baseline projection, GHG inventory Resource Type: Dataset, Publications Website: www.iea.org/co2highlights/co2highlights.pdf CO2 Emissions from Fuel Combustion Screenshot References: CO2 Emissions from Fuel Combustion[1] Overview "This annual publication contains: estimates of CO2 emissions by country from 1971 to 2008 selected indicators such as CO2/GDP, CO2/capita, CO2/TPES and CO2/kWh CO2 emissions from international marine and aviation bunkers, and other relevant information" Excel Spreadsheet References ↑ "CO2 Emissions from Fuel Combustion"

138

Chemical Looping Combustion  

Science Journals Connector (OSTI)

Chemical looping combustion (CLC) and looping cycles in general represent an important new ... technologies, which can be deployed for direct combustion as well as be used in gasification...2...stream suitable fo...

Edward John (Ben) Anthony

2012-01-01T23:59:59.000Z

139

Chemistry of Combustion Processes  

Science Journals Connector (OSTI)

The quantitative description and understanding of combustion processes needs extreme computational efforts and has at ... treatment can give a lot of insight into combustion processes, as demonstrated in the foll...

J. Warnatz

2000-01-01T23:59:59.000Z

140

Overview of Biomass Combustion  

Science Journals Connector (OSTI)

The main combustion systems for biomass fuels are presented and the respective requirements ... etc.) in industrial boilers or for co-combustion in power plants. For fuels with high ... moving grate firings are u...

T. Nussbaumer; J. E. Hustad

1997-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

NETL: IEP – Post-Combustion CO2 Emissions Control - Oxy-Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

IEP - Oxy-Combustion CO2 Emissions Control IEP - Oxy-Combustion CO2 Emissions Control Oxy-Combustion Technology Development for Industrial-Scale Boiler Applications Project No.: DE-NT0005290 Alstom oxy-combustion test facility Alstom oxy-combustion test facility. Alstom will develop an oxyfuel firing system design specifically for retrofit to tangential-fired (T-fired) boilers and provide information to address the technical gaps for commercial boiler design. Several oxyfuel system design concepts, such as internal flue gas recirculation and various oxygen injection schemes, will be evaluated for cost-effectiveness in satisfying furnace design conditions in a T-fired boiler. The evaluation will use an array of tools, including Alstom's proprietary models and design codes, along with 3-D computational fluid dynamics modeling. A

142

Political Science Sample 4-5 Year Study Plan for Doctoral Program Current catalog for student with B.A., major field International Relations with minor fields  

E-Print Network [OSTI]

Political Science Sample 4-5 Year Study Plan for Doctoral Program Current catalog for student with B.A., major field International Relations with minor fields Comparative Politics and Political Politics PSC 710r Proseminar in American Politics Year One: Semester 2 PSC 702 Advanced Quantitative

Ahmad, Sajjad

143

Modeling and Rendering Physically-Based Wood Combustion  

Science Journals Connector (OSTI)

Rendering of wood combustion has received some attention recently, but prior work has not incorporated effects of internal wood properties such as density variation (i.e. "grain") and pre-combustion processes such as drying. In this paper we present ...

Roderick M. Riensche; Robert R. Lewis

2009-11-01T23:59:59.000Z

144

Using Parametrized Finite Combustion Stage Models to Characterize Combustion in Diesel Engines  

Science Journals Connector (OSTI)

Characterizing combustion in diesel engines is not only necessary when researching the instantaneous combustion phenomena but also when investigating the change of the combustion process under variable engine operating conditions. ... This project partly is financially supported by the Fundamental Research Funds for the Central Universities, Harbin Engineering University, China, HEUCF120307, and the International Science and Technology Cooperation Program of China. ... Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy (2011), 225 (3), 309-318 CODEN: PMAEET; ISSN:0957-6509. ...

Yu Ding; Douwe Stapersma; Hugo Grimmelius

2012-10-29T23:59:59.000Z

145

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the fourth quarter January-March 2001 in the following task areas: Task 1 - Oxygen Enhanced Combustion, Task 2 - Oxygen Transport Membranes and Task 4 - Program Management. This report will also recap the results of the past year. The program is proceeding in accordance with the objectives for the first year. OTM material characterization was completed. 100% of commercial target flux was demonstrated with OTM disks. The design and assembly of Praxair's single tube high-pressure test facility was completed. The production of oxygen with a purity of better than 99.5% was demonstrated. Coal combustion testing was conducted at the University of Arizona. Modest oxygen enhancement resulted in NOx emissions reduction. The injector for oxygen enhanced coal based reburning was conducted at Praxair. Combustion modeling with Keystone boiler was completed. Pilot-scale combustion test furnace simulations continued this quarter.

David R. Thompson; Lawrence E. Bool; Jack C. Chen

2001-04-01T23:59:59.000Z

146

Vehicle Technologies Office: 2010 Advanced Combustion R&D Annual Progress Report  

Broader source: Energy.gov [DOE]

2010 annual report on the work of the the Advanced Combustion Engine R&D subprogram. The Advanced Combustion Engine R&D subprogram supports the Vehicle Technologies Office mission by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future federal emissions regulations.

147

Vehicle Technologies Office: 2008 Advanced Combustion R&D Annual Progress Report  

Broader source: Energy.gov [DOE]

2008 annual report on the work of the the Advanced Combustion Engine R&D subprogram. The Advanced Combustion Engine R&D subprogram supports the Vehicle Technologies Office's mission by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future federal emissions regulations.

148

Vehicle Technologies Office: 2009 Advanced Combustion R&D Annual Progress Report  

Broader source: Energy.gov [DOE]

2010 annual report on the work of the the Advanced Combustion Engine R&D subprogram.The Advanced Combustion Engine R&D subprogram supports the Vehicle Technologies Office by removing the technical barriers to commercialization of internal combustion engines for passenger and commercial vehicles that meet future Federal emissions regulations.

149

Vehicle Technologies Office: 2012 Advanced Combustion R&D Annual Progress Report  

Broader source: Energy.gov [DOE]

Annual report on the work of the the Advanced Combustion Engine R&D subprogram. The Advanced Combustion Engine R&D subprogram supports the Vehicle Technologies Office mission by removing the critical technical barriers to commercialization of advanced internal combustion engines (ICEs) for passenger and commercial vehicles that meet future federal emissions regulations.

150

Vehicle Technologies Office: Materials for High-Efficiency Combustion Engines  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office (VTO) is supporting work to improve the efficiency of advanced internal combustion engines for automotive, light trucks, and heavy-truck applications by 25% to 50%....

151

APPENDIX B: CARBON DIOXIDE CAPTURE TECHNOLOGY SHEETS PRE-COMBUSTION SOLVENTS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

CARBON DIOXIDE CAPTURE TECHNOLOGY SHEETS PRE-COMBUSTION SOLVENTS PRE-COMBUSTION SORBENTS PRE-COMBUSTION MEMBRANES POST-COMBUSTION SOLVENTS POST-COMBUSTION SORBENTS POST-COMBUSTION MEMBRANES OXY-COMBUSTION OXYGEN PRODUCTION CHEMICAL LOOPING ADVANCED COMPRESSION R&D COLLABORATIONS B-1 APPENDIX B: CARBON DIOXIDE CAPTURE TECHNOLOGY SHEETS APPENDIX B: CARBON DIOXIDE CAPTURE TECHNOLOGY SHEETS NATIONAL ENERGY TECHNOLOGY LABORATORY PRE-COMBUSTION SOLVENTS B-6 SRI International - CO 2 Capture Using AC-ABC Processt B-7 PRE-COMBUSTION SORBENTS B-14 TDA Research - CO 2 Capture for Low-Rank Coal IGCC Systems B-15 URS Group - Sorbent Development for WGS B-18 Air Products and Chemicals - Advanced Acid Gas Separation B-24 Ohio State University-Department of Chemical Engineering - Calcium Looping for Hydrogen Production B-33

152

Low NOx combustion  

SciTech Connect (OSTI)

Combustion of hydrocarbon liquids and solids is achieved with less formation of NOx by feeding a small amount of oxygen into the fuel stream.

Kobayashi; Hisashi (Putnam Valley, NY), Bool, III; Lawrence E. (Aurora, NY)

2007-06-05T23:59:59.000Z

153

Low NOx combustion  

SciTech Connect (OSTI)

Combustion of hydrocarbon liquids and solids is achieved with less formation of NOx by feeding a small amount of oxygen into the fuel stream.

Kobayashi, Hisashi (Putnam Valley, NY); Bool, III, Lawrence E. (Aurora, NY)

2008-10-21T23:59:59.000Z

154

Introduction to Biomass Combustion  

Science Journals Connector (OSTI)

Biomass was the major fuel in the world ... hundreds when coal then became dominant. The combustion of solid biofuels as a primary energy...

Jenny M. Jones; Amanda R. Lea-Langton…

2014-01-01T23:59:59.000Z

155

Coal combustion science. Quarterly progress report, April 1993--June 1993  

SciTech Connect (OSTI)

This document is a quarterly status report of the Coal Combustion Science Project that is being conducted at the Combustion Research Facility, Sandia National Laboratories. The information reported is for Apr-Jun 1993. The objective of this work is to support the Office of Fossil Energy in executing research on coal combustion science. This project consists of basic research on coal combustion that supports both the PETC Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency Coal Combustion Science Project. The objective of the kinetics and mechanisms of pulverized coal char combustion task is to characterize the combustion behavior of selected US coals under conditions relevant to industrial pulverized coal-fired furnaces. Work is being done in four areas: kinetics of heterogeneous fuel particle populations; char combustion kinetics at high carbon conversion; the role of particle structure and the char formation process in combustion and; unification of the Sandia char combustion data base. This data base on the high temperature reactivities of chars from strategic US coals will permit identification of important fuel-specific trends and development of predictive capabilities for advanced coal combustion systems. The objective of the fate of inorganic material during coal combustion task is the establish a quantitative understanding of the mechanisms and rates of transformation, fragmentation, and deposition of inorganic material during coal combustion as a function of coal type, particle size and temperature, the initial forms and distribution of inorganic species in the unreacted coal, and the local gas temperature and composition. In addition, optical diagnostic capabilities are being developed for in situ, real-time detection of inorganic vapor species and surface species during ash deposition. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

Hardesty, D.R. [ed.

1994-05-01T23:59:59.000Z

156

The Combustion of Solid Biomass  

Science Journals Connector (OSTI)

The combustion of solid biomass is covered in this chapter. This covers the general mechanism of combustion, moisture evaporation, devolatilisation, the combustion of the volatiles gases and tars and finally char...

Jenny M. Jones; Amanda R. Lea-Langton…

2014-01-01T23:59:59.000Z

157

Past experiences with automotive external combustion engines  

SciTech Connect (OSTI)

GMR (General Motors Research Laboratories, now GM R and D Center) has a history of improving the internal combustion engine, especially as it relates to automotive use. During the quarter century from 1950--75, considerable effort was devoted to evaluating alternative powerplants based on thermodynamic cycles different from those on which the established spark-ignition and diesel engines are founded. Two of these, the steam engine and the Stirling engine, incorporated external combustion. Research on those two alternatives is reviewed. Both were judged to fall short of current needs for commercial success as prime movers for conventional automotive vehicles.

Amann, C.A.

1999-07-01T23:59:59.000Z

158

Web: http://dust.ess.uci.edu/prp/prp ids/prp ids.pdf NASA International Polar Year (IPY) Proposal Submitted: April 17, 2006  

E-Print Network [OSTI]

Web: http://dust.ess.uci.edu/prp/prp ids/prp ids.pdf NASA International Polar Year (IPY) Proposal Researchers and Postdocs on CRY- OLIST and on ESS Website. 6. 20070723: Registered for SPAC Workshop for potential collaborators/contributors: 1. Use CVS to obtain source to this proposal: cvs -d :ext:esmf.ess

Zender, Charles

159

Fifteenth combustion research conference  

SciTech Connect (OSTI)

The BES research efforts cover chemical reaction theory, experimental dynamics and spectroscopy, thermodynamics of combustion intermediates, chemical kinetics, reaction mechanisms, combustion diagnostics, and fluid dynamics and chemically reacting flows. 98 papers and abstracts are included. Separate abstracts were prepared for the papers.

NONE

1993-06-01T23:59:59.000Z

160

Analysis on investment strategies in China: the case of biomass direct combustion power generation sector  

Science Journals Connector (OSTI)

Abstract To adjust the energy structure, protect the environment and deal with climate change, China has proposed that non-fossil energy would constitute 15 percent of the total energy consumption at the end of the “13th Five-Year Plan” period (2016–2020), and the use of biomass would account for 4 percent of primary energy consumption. Firstly, the current situation, the internal environment and the external environment of the biomass direct combustion power generation are analyzed. Then, the financial model of biomass direct combustion power generation project is established, and contrasts with other major new energy projects are carried out in terms of operation models, opportunities and risks so as to explore the investment features of this project in depth. Finally, appropriate investment strategies are proposed with respect of the investors, and policy recommendations for the development of the industry are attempted as well.

Zhao Xin-Gang; Feng Tian-Tian; Ma Yu; Yang Yi-Sheng; Pan Xue-Fu

2015-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Reaction and diffusion in turbulent combustion  

SciTech Connect (OSTI)

The motivation for this project is the need to obtain a better quantitative understanding of the technologically-important phenomenon of turbulent combustion. In nearly all applications in which fuel is burned-for example, fossil-fuel power plants, furnaces, gas-turbines and internal-combustion engines-the combustion takes place in a turbulent flow. Designers continually demand more quantitative information about this phenomenon-in the form of turbulent combustion models-so that they can design equipment with increased efficiency and decreased environmental impact. For some time the PI has been developing a class of turbulent combustion models known as PDF methods. These methods have the important virtue that both convection and reaction can be treated without turbulence-modelling assumptions. However, a mixing model is required to account for the effects of molecular diffusion. Currently, the available mixing models are known to have some significant defects. The major motivation of the project is to seek a better understanding of molecular diffusion in turbulent reactive flows, and hence to develop a better mixing model.

Pope, S.B. [Mechanical and Aerospace Engineering, Ithaca, NY (United States)

1993-12-01T23:59:59.000Z

162

Coal combustion products (CCPs  

Broader source: Energy.gov (indexed) [DOE]

combustion products (CCPs) combustion products (CCPs) are solid materials produced when coal is burned to generate electricity. Since coal provides the largest segment of U.S. electricity generation (45 percent in 2010), finding a sustainable solution for CCPs is an important environmental challenge. When properly managed, CCPs offer society environmental and economic benefits without harm to public health and safety. Research supported by the U.S. Department of Energy's (DOE) Office of Fossil Energy (FE) has made an important contribution in this regard. Fossil Energy Research Benefits Coal Combustion Products Fossil Energy Research Benefits

163

Sandia Combustion Research: Technical review  

SciTech Connect (OSTI)

This report contains reports from research programs conducted at the Sandia Combustion Research Facility. Research is presented under the following topics: laser based diagnostics; combustion chemistry; reacting flow; combustion in engines and commercial burners; coal combustion; and industrial processing. Individual projects were processed separately for entry onto the DOE databases.

NONE

1995-07-01T23:59:59.000Z

164

Packed Bed Combustion: An Overview  

E-Print Network [OSTI]

;Packed Bed Combustion - University of Ottawa - CICS 2005 fuel fuel feed air products air fuel Retort) products Underfeed Combustion fuel feed air #12;Packed Bed Combustion - University of Ottawa - CICS 2005 required #12;Packed Bed Combustion - University of Ottawa - CICS 2005 Overfeed Bed fuel motion products air

Hallett, William L.H.

165

Engine Combustion & Efficiency - FEERC  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Engine Combustion & Efficiency Engine Combustion & Efficiency ORNL currently and historically supports the U.S. DOE on multi-cylinder and vehicle applications of diesel combustion, lean burn gasoline combustion, and low temperature combustion processes, and performs principal research on efficiency enabling technologies including emission controls, thermal energy recovery, and bio-renewable fuels. Research areas span from fundamental concepts to engine/vehicle integration and demonstration with a particular emphasis on the following areas: Thermodynamics for identifying and characterizing efficiency opportunities for engine-systems as well as the development of non-conventional combustion concepts for reducing fundamental combustion losses. Nonlinear sciences for improving the physical understanding and

166

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the fourth quarter January-March 2002 in the following task areas: Task 1--Oxygen Enhanced Combustion, Task 2--Oxygen Transport Membranes, Task 3--Economic Evaluation and Task 4--Program Management. This report will also recap the results of the past year. The program is proceeding in accordance with the objectives for the second year. The first round of pilot scale testing with 3 bituminous coals was completed at the University of Utah. Full-scale testing equipment is in place and experiments are underway. Coal combustion lab-scale testing was completed at the University of Arizona. Modest oxygen enhancement resulted in NOx emissions reduction. Combustion modeling activities continued with pilot-scale combustion test furnace simulations. 75% of target oxygen flux was demonstrated with small PSO1 tube in Praxair's single tube high-pressure test facility. The production of oxygen with a purity of better than 99.999% was demonstrated. Economic evaluation has confirmed the advantage of oxygen-enhanced combustion. Two potential host sites have been identified.

David R. Thompson; Lawrence E. Bool; Jack C. Chen

2002-04-01T23:59:59.000Z

167

Advanced diesel combustion  

Science Journals Connector (OSTI)

Future emission norms will further reduce the vehicle emissions of diesel engines. To meet the goal of achieving these stringent limits while maintaining attractive attributes of marketability, the combustion ...

Dirk Adolph; Hartwig Busch; Stefan Pischinger; Andreas Kolbeck…

2008-01-01T23:59:59.000Z

168

Advanced Combustion Technologies  

Broader source: Energy.gov [DOE]

The workhorse of America's electric power sector is the coal-fired power plant. Today, coal combustion plants account for more than half of the Nation's electric power generation. Largely because...

169

Catalytic Combustion Processes  

Science Journals Connector (OSTI)

This work presents experimental data on the effect of catalytic additives on the combustion characteristics of ammonium nitrate and perchlorate and the explosives of different classes. Burning rates are determ...

A. P. Glaskova

1991-01-01T23:59:59.000Z

170

Advanced Combustion Technology to Enable High Efficiency Clean...  

Broader source: Energy.gov (indexed) [DOE]

Combustion Technology to Enable High Efficiency Clean Combustion Advanced Combustion Technology to Enable High Efficiency Clean Combustion Summary of advanced combustion research...

171

Coal combustion system  

DOE Patents [OSTI]

In a coal combustion system suitable for a gas turbine engine, pulverized coal is transported to a rich zone combustor and burned at an equivalence ratio exceeding 1 at a temperature above the slagging temperature of the coal so that combustible hot gas and molten slag issue from the rich zone combustor. A coolant screen of water stretches across a throat of a quench stage and cools the combustible gas and molten slag to below the slagging temperature of the coal so that the slag freezes and shatters into small pellets. The pelletized slag is separated from the combustible gas in a first inertia separator. Residual ash is separated from the combustible gas in a second inertia separator. The combustible gas is mixed with secondary air in a lean zone combustor and burned at an equivalence ratio of less than 1 to produce hot gas motive at temperature above the coal slagging temperature. The motive fluid is cooled in a dilution stage to an acceptable turbine inlet temperature before being transported to the turbine.

Wilkes, Colin (Lebanon, IN); Mongia, Hukam C. (Carmel, IN); Tramm, Peter C. (Indianapolis, IN)

1988-01-01T23:59:59.000Z

172

Pulsed jet combustion generator for premixed charge engines  

DOE Patents [OSTI]

A method and device for generating pulsed jets which will form plumes comprising eddie structures, which will entrain a fuel/air mixture from the head space of an internal combustion engine, and mixing this fuel/air mixture with a pre-ignited fuel/air mixture of the plumes thereby causing combustion of the reactants to occur within the interior of the eddie structures.

Oppenheim, A. K. (Berkeley, CA); Stewart, H. E. (Alameda, CA); Hom, K. (Hercules, CA)

1990-01-01T23:59:59.000Z

173

Internal Combustion Engine Energy Retention (ICEER)  

Broader source: Energy.gov (indexed) [DOE]

manufacturer VSATT Vehicle Systems Analysis Technical Team 3 Relevance for DOE Fuel-Saving Mission The "Cold-Start" Penalty: Consider the following... * ICEs presently...

174

International Conference on Engineering Education October 1621, 2004, Gainesville, Florida. The Learning Factory 10 Years of Impact at Penn State  

E-Print Network [OSTI]

of engineering majors for lack of hands-on opportunities to satisfy creativity, and graduates lackedInternational Conference on Engineering Education October 16­21, 2004, Gainesville, Florida. 1-industry partnership established to integrate design, manufacturing and business realities into the engineering

Lamancusa, John S.

175

Combustion Model for Engine Concept Development | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Model for Engine Concept Development Presentation shows how 1-cylinder testing, 3D combustion CFD and 1D gas exchange with an advanced combustion model are used...

176

Fuel Chemistry and Cetane Effects on HCCI Performance, Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Statistical Overview of 5 Years of HCCI Fuel and Engine Data from ORNL Response of Oil Sands Derived Fuels in Diesel HCCI Operation Combustion, Efficiency, and Fuel Effects in a...

177

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the second quarter July--September 2000 in the following task areas: Task 1-Oxygen Enhanced Combustion, Task 2-Oxygen Transport Membranes and Task 4-Program Management. The program is proceeding in accordance with the objectives for the first year. OTM tube characterization is well underway, the design and assembly of the high pressure permeation test facility is complete and the facility will be in full operation during the next quarter. Combustion testing has been initiated at both the University of Arizona and Praxair. Testing at the University of Arizona has experienced some delays; steps have been take to get the test work back on schedule. Completion of the first phase of the testing is expected in next quarter. Combustion modeling has been started at both REI and Praxair, preliminary results are expected in the next quarter.

Lawrence E. Bool; Jack C. Chen; David R. Thompson

2000-10-01T23:59:59.000Z

178

Characterization of Pennsylvania Coal Combustion Products for Beneficial Use in Mine Land Reclamation.  

E-Print Network [OSTI]

??Over 130 million tons of coal combustion products (CCPs) are produced each year in the U.S. Less than half of these CCPs will be utilized… (more)

Braun, Gregory

2012-01-01T23:59:59.000Z

179

Combustible structural composites and methods of forming combustible structural composites  

DOE Patents [OSTI]

Combustible structural composites and methods of forming same are disclosed. In an embodiment, a combustible structural composite includes combustible material comprising a fuel metal and a metal oxide. The fuel metal is present in the combustible material at a weight ratio from 1:9 to 1:1 of the fuel metal to the metal oxide. The fuel metal and the metal oxide are capable of exothermically reacting upon application of energy at or above a threshold value to support self-sustaining combustion of the combustible material within the combustible structural composite. Structural-reinforcing fibers are present in the composite at a weight ratio from 1:20 to 10:1 of the structural-reinforcing fibers to the combustible material. Other embodiments and aspects are disclosed.

Daniels, Michael A.; Heaps, Ronald J.; Steffler, Eric D.; Swank, W. David

2013-04-02T23:59:59.000Z

180

Combustible structural composites and methods of forming combustible structural composites  

DOE Patents [OSTI]

Combustible structural composites and methods of forming same are disclosed. In an embodiment, a combustible structural composite includes combustible material comprising a fuel metal and a metal oxide. The fuel metal is present in the combustible material at a weight ratio from 1:9 to 1:1 of the fuel metal to the metal oxide. The fuel metal and the metal oxide are capable of exothermically reacting upon application of energy at or above a threshold value to support self-sustaining combustion of the combustible material within the combustible structural composite. Structural-reinforcing fibers are present in the composite at a weight ratio from 1:20 to 10:1 of the structural-reinforcing fibers to the combustible material. Other embodiments and aspects are disclosed.

Daniels, Michael A. (Idaho Falls, ID); Heaps, Ronald J. (Idaho Falls, ID); Steffler, Eric D (Idaho Falls, ID); Swank, William D. (Idaho Falls, ID)

2011-08-30T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Ultra-Clean Low Swirl Combustion : Technologies : From the Lab to the  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ultra-Clean Low Swirl Combustion Ultra-Clean Low Swirl Combustion From the Lab to the Marketplace Ten Years Later, Energy Efficient Technologies from Research at the Lawrence Berkeley National Laboratory Berkeley Lab logo (left) with six rows of gray dots transitioning to a line art drawing of a cityscape and residential houses. Ultra-Clean Low Swirl Combustion Combustion provides 83% of the energy consumed in the U.S. For the past three decades the reduction of harmful pollutants from combustion systems has been the major driver of combustion technology development. In 1991, Robert Cheng, a Berkeley Lab scientist, conceived a combustion method that emits a very low level of pollutants. His low swirl combustion method operates on a new basic principle that can be broadly applied to heat and

182

Combustion Byproducts Recycling Consortium  

SciTech Connect (OSTI)

The Combustion Byproducts Recycling Consortium (CBRC) program was developed as a focused program to remove and/or minimize the barriers for effective management of over 123 million tons of coal combustion byproducts (CCBs) annually generated in the USA. At the time of launching the CBRC in 1998, about 25% of CCBs were beneficially utilized while the remaining was disposed in on-site or off-site landfills. During the ten (10) year tenure of CBRC (1998-2008), after a critical review, 52 projects were funded nationwide. By region, the East, Midwest, and West had 21, 18, and 13 projects funded, respectively. Almost all projects were cooperative projects involving industry, government, and academia. The CBRC projects, to a large extent, successfully addressed the problems of large-scale utilization of CCBs. A few projects, such as the two Eastern Region projects that addressed the use of fly ash in foundry applications, might be thought of as a somewhat smaller application in comparison to construction and agricultural uses, but as a novel niche use, they set the stage to draw interest that fly ash substitution for Portland cement might not attract. With consideration of the large increase in flue gas desulfurization (FGD) gypsum in response to EPA regulations, agricultural uses of FGD gypsum hold promise for large-scale uses of a product currently directed to the (currently stagnant) home construction market. Outstanding achievements of the program are: (1) The CBRC successfully enhanced professional expertise in the area of CCBs throughout the nation. The enhanced capacity continues to provide technology and information transfer expertise to industry and regulatory agencies. (2) Several technologies were developed that can be used immediately. These include: (a) Use of CCBs for road base and sub-base applications; (b) full-depth, in situ stabilization of gravel roads or highway/pavement construction recycled materials; and (c) fired bricks containing up to 30%-40% F-fly ash. Some developed technologies have similar potential in the longer term. (3) Laboratory studies have been completed that indicate that much higher amounts of fly ash could be added in cement-concrete applications under some circumstances. This could significantly increase use of fly ash in cement-concrete applications. (4) A study of the long-term environmental effects of structural fills in a surface mine in Indiana was completed. This study has provided much sought after data for permitting large-volume management options in both beneficial as well as non-beneficial use settings. (5) The impact of CBRC on CCBs utilization trends is difficult to quantify. However it is fair to say that the CBRC program had a significant positive impact on increased utilization of CCBs in every region of the USA. Today, the overall utilization of CCBs is over 43%. (6) CBRC-developed knowledge base led to a large number of other projects completed with support from other sources of funding. (7) CBRC research has also had a large impact on CCBs management across the globe. Information transfer activities and visitors from leading coal producing countries such as South Africa, Australia, England, India, China, Poland, Czech Republic and Japan are truly noteworthy. (8) Overall, the CBRC has been a truly successful, cooperative research program. It has brought together researchers, industry, government, and regulators to deal with a major problem facing the USA and other coal producing countries in the world.

Paul Ziemkiewicz; Tamara Vandivort; Debra Pflughoeft-Hassett; Y. Paul Chugh; James Hower

2008-08-31T23:59:59.000Z

183

A MODEL FOR POROUS-MEDIUM COMBUSTION  

Science Journals Connector (OSTI)

......these applied in coal combustion appears in...understanding of the chemistry of combustion...GLASSMAN, Combustion (Academic Press...ESSENHIGH, In Chemistry of Coal Utilization...POROUS-MEDIUM COMBUSTION 177 8. D. A......

J. NORBURY; A. M. STUART

1989-02-01T23:59:59.000Z

184

Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II Title Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II Publication Type Report LBNL Report Number LBNL-6193E Year of Publication 2013 Authors Rapp, Vi H., Albert Pastor-Perez, Brett C. Singer, and Craig P. Wray Date Published 04/2013 Abstract VENT-II is a computer program designed to provide detailed analysis of natural draft and induced draft combustion appliance vent-systems (i.e., furnace or water heater). This program is capable of predicting house depressurization thresholds that lead to backdrafting and spillage of combustion appliances; however, validation reports of the program being applied for this

185

Assessment of Literature Related to Combustion Appliance Venting Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Assessment of Literature Related to Combustion Appliance Venting Systems Assessment of Literature Related to Combustion Appliance Venting Systems Title Assessment of Literature Related to Combustion Appliance Venting Systems Publication Type Report LBNL Report Number LBNL-5798E Year of Publication 2012 Authors Rapp, Vi H., Brett C. Singer, J. Chris Stratton, and Craig P. Wray Date Published 06/2012 Abstract In many residential building retrofit programs, air tightening to increase energy efficiency is constrained by concerns about related impacts on the safety of naturally vented combustion appliances. Tighter housing units more readily depressurize when exhaust equipment is operated, making combustion appliances more prone to backdraft or spillage. Several test methods purportedly assess the potential for depressurization-induced backdrafting and spillage, but these tests are not robustly reliable and repeatable

186

Vehicle Technologies Office: Combustion Engine Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Combustion Engine Combustion Engine Research to someone by E-mail Share Vehicle Technologies Office: Combustion Engine Research on Facebook Tweet about Vehicle Technologies Office: Combustion Engine Research on Twitter Bookmark Vehicle Technologies Office: Combustion Engine Research on Google Bookmark Vehicle Technologies Office: Combustion Engine Research on Delicious Rank Vehicle Technologies Office: Combustion Engine Research on Digg Find More places to share Vehicle Technologies Office: Combustion Engine Research on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Advanced Combustion Engines Combustion Engines Emission Control Waste Heat Recovery Fuels & Lubricants Materials Technologies Combustion Engine Research

187

Vehicle Technologies Office: Advanced Combustion Engines  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Combustion Advanced Combustion Engines to someone by E-mail Share Vehicle Technologies Office: Advanced Combustion Engines on Facebook Tweet about Vehicle Technologies Office: Advanced Combustion Engines on Twitter Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Google Bookmark Vehicle Technologies Office: Advanced Combustion Engines on Delicious Rank Vehicle Technologies Office: Advanced Combustion Engines on Digg Find More places to share Vehicle Technologies Office: Advanced Combustion Engines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Advanced Combustion Engines Combustion Engines Emission Control Waste Heat Recovery Fuels & Lubricants Materials Technologies Advanced Combustion Engines

188

New Phenomenological Six-Zone Combustion Model for Direct-Injection Diesel Engines  

Science Journals Connector (OSTI)

New Phenomenological Six-Zone Combustion Model for Direct-Injection Diesel Engines ... Nevertheless, to comply with ever more stringent emission standards, particularly regarding NOx and particulate matter (PM) emissions, such as EURO 6 in Europe, diesel engine manufacturers have to find new in-cylinder combustion strategies and/or complex after-treatment devices to reduce their emissions. ... Heywood, J. B. Internal Combustion Engines Fundamentals; McGraw-Hill: New York, 1988. ...

Alain Maiboom; Xavier Tauzia; Samiur Rahman Shah; Jean-François Hétet

2009-01-09T23:59:59.000Z

189

The Future of Combustion Turbine Technology for Industrial and Utility Power Generation  

E-Print Network [OSTI]

gasification-based combustion turbine systems. The paper dmws heavily from a technical, economic, and business analysis, Combustion Turbine Power Systems, recently completed by SFA Pacific. The analysis was sponsored by an international group of energy...-14, 1994 Coupled with gasification, combustion turbine power generation also may provide attractive opportunities for other fuels, such as low-value residual oils and petroleum coke. Residual oil firing of boilers in large steam turbine-based power...

Karp, A. D.; Simbeck, D. R.

190

Thermal ignition combustion system  

DOE Patents [OSTI]

The thermal ignition combustion system comprises means for providing walls defining an ignition chamber, the walls being made of a material having a thermal conductivity greater than 20 W/m C and a specific heat greater than 480 J/kg C with the ignition chamber being in constant communication with the main combustion chamber, means for maintaining the temperature of the walls above a threshold temperature capable of causing ignition of a fuel, and means for conducting fuel to the ignition chamber. 8 figs.

Kamo, R.; Kakwani, R.M.; Valdmanis, E.; Woods, M.E.

1988-04-19T23:59:59.000Z

191

Studies in combustion dynamics  

SciTech Connect (OSTI)

The goal of this program is to develop a fundamental understanding and a quantitative predictive capability in combustion modeling. A large part of the understanding of the chemistry of combustion processes comes from {open_quotes}chemical kinetic modeling.{close_quotes} However, successful modeling is not an isolated activity. It necessarily involves the integration of methods and results from several diverse disciplines and activities including theoretical chemistry, elementary reaction kinetics, fluid mechanics and computational science. Recently the authors have developed and utilized new tools for parallel processing to implement the first numerical model of a turbulent diffusion flame including a {open_quotes}full{close_quotes} chemical mechanism.

Koszykowski, M.L. [Sandia National Laboratories, Livermore, CA (United States)

1993-12-01T23:59:59.000Z

192

Thermal ignition combustion system  

SciTech Connect (OSTI)

The thermal ignition combustion system comprises means for providing walls defining an ignition chamber, the walls being made of a material having a thermal conductivity greater than 20 W/m.degree. C. and a specific heat greater than 480 J/kg.degree. C. with the ignition chamber being in constant communication with the main combustion chamber, means for maintaining the temperature of the walls above a threshold temperature capable of causing ignition of a fuel, and means for conducting fuel to the ignition chamber.

Kamo, Roy (Columbus, IN); Kakwani, Ramesh M. (Columbus, IN); Valdmanis, Edgars (Columbus, IN); Woods, Melvins E. (Columbus, IN)

1988-01-01T23:59:59.000Z

193

Improving alternative fuel utilization: detailed kinetic combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

alternative fuel utilization: detailed kinetic combustion modeling & experimental testing Improving alternative fuel utilization: detailed kinetic combustion modeling &...

194

Mechanism of Hydrocarbon Formation in Combustion Processes  

Science Journals Connector (OSTI)

Emissions from transportation systems that derive their energy directly from combustion processes include products of incomplete combustion, oxides of...

R. A. Matula

1973-01-01T23:59:59.000Z

195

A new hybrid pneumatic combustion engine to improve fuel consumption of wind–Diesel power system for non-interconnected areas  

Science Journals Connector (OSTI)

This paper presents an evaluation of an optimized Hybrid Pneumatic-Combustion Engine (HPCE) concept that permits reducing fuel consumption for electricity production in non-interconnected remote areas, originally equipped with hybrid Wind–Diesel System (WDS). Up to now, most of the studies on the pneumatic hybridization of Internal Combustion Engines (ICE) have dealt with two-stroke pure pneumatic mode. The few studies that have dealt with hybrid pneumatic-combustion four-stroke mode require adding a supplementary valve to charge compressed air in the combustion chamber. This modification means that a new cylinder head should be fabricated. Moreover, those studies focus on spark ignition engines and are not yet validated for Diesel engines. Present HPCE is capable of making a Diesel engine operate under two-stroke pneumatic motor mode, two-stroke pneumatic pump mode and four-stroke hybrid mode, without needing an additional valve in the combustion chamber. This fact constitutes this study’s strength and innovation. The evaluation of the concept is based on ideal thermodynamic cycle modeling. The optimized valve actuation timings for all modes lead to generic maps that are independent of the engine size. The fuel economy is calculated for a known site during a whole year, function of the air storage volume and the wind power penetration rate.

Tammam Basbous; Rafic Younes; Adrian Ilinca; Jean Perron

2012-01-01T23:59:59.000Z

196

Reversed flow fluidized-bed combustion apparatus  

DOE Patents [OSTI]

The present invention is directed to a fluidized-bed combustion apparatus provided with a U-shaped combustion zone. A cyclone is disposed in the combustion zone for recycling solid particulate material. The combustion zone configuration and the recycling feature provide relatively long residence times and low freeboard heights to maximize combustion of combustible material, reduce nitrogen oxides, and enhance sulfur oxide reduction.

Shang, Jer-Yu (Fairfax, VA); Mei, Joseph S. (Morgantown, WV); Wilson, John S. (Morgantown, WV)

1984-01-01T23:59:59.000Z

197

Aviation Combustion Toxicology: An Overview  

Science Journals Connector (OSTI)

......in a radiant heat furnace. Rats...the produced combustion products in...in both the combustion tube and radiant heat systems proved...literature data for CO2, low...acrolein, and heat expo- sures...primary toxic combustion gases and are...structures. The hydrocarbon constituents......

Arvind K. Chaturvedi

2010-01-01T23:59:59.000Z

198

Four Lectures on Turbulent Combustion  

E-Print Network [OSTI]

, combustion in a Diesel engine or in furnaces essentially taakes place under non-premixed conditions. In the Diesel engine a liquid fuel spray is injected into hot compressed air, the fuel evaporates and mixes combustion are in general subdivided into two classes: premixed or non-premixed combustion. For example

Peters, Norbert

199

ARM Climate Research Facilities on the North Slope of Alaska: Field Campaigns in 2007, New Facilities, and the International Polar Year  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Climate Research Facilities on the North Slope of Alaska: Climate Research Facilities on the North Slope of Alaska: Field Campaigns in 2007, New Facilities, and the International Polar Year Radiative Heating in Underexplored Bands Campaign (RHUBC): Feb 26 - Mar 14 2007 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Contributors: Mark Ivey, Bernie Zak, Jeff Zirzow, Sandia National Labs Dana Truffer-Moudra, University of Alaska Fairbanks Hans Verlinde, Chad Bahrmann, Scott Richardson, Penn State University Winter

200

Superheated fuel injection for combustion of liquid-solid slurries  

DOE Patents [OSTI]

A method and device are claimed for obtaining, upon injection, flash evaporation of a liquid in a slurry fuel to aid in ignition and combustion. The device is particularly beneficial for use of coal-water slurry fuels in internal combustion engines such as diesel engines and gas turbines, and in external combustion devices such as boilers and furnaces. The slurry fuel is heated under pressure to near critical temperature in an injector accumulator, where the pressure is sufficiently high to prevent boiling. After injection into a combustion chamber, the water temperature will be well above boiling point at a reduced pressure in the combustion chamber, and flash boiling will preferentially take place at solid-liquid surfaces, resulting in the shattering of water droplets and the subsequent separation of the water from coal particles. This prevents the agglomeration of the coal particles during the subsequent ignition and combustion process, and reduces the energy required to evaporate the water and to heat the coal particles to ignition temperature. The overall effect will be to accelerate the ignition and combustion rates, and to reduce the size of the ash particles formed from the coal. 2 figs., 2 tabs.

Robben, F.A.

1984-10-19T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Integrated Combined Heat and Power/Advanced Reciprocating Internal...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combined Heat and PowerAdvanced Reciprocating Internal Combustion Engine System for Landfill Gas to Power Applications Development of an Improved Modular Landfill Gas Cleanup and...

202

SIAM Conference on Numerical Combustion Sedona, AZ May 9-12, 2004  

SciTech Connect (OSTI)

The Society for Industrial and Applied Mathematics hosted the Tenth International Conference on Numerical Combustion held May 9-12, 2004 in Sedona, Arizona. This distinguished conference series began in 1985 in Sophia Antipolis, France and was followed by conferences in San Francisco, California (1987), Juan les Pins, France (1989), St. Petersburg Beach, Florida (1991), Garmisch, Germany (1993), New Orleans, Louisiana (1996), York, England (1998), Amelia Island, Florida (2000), and Sorrento, Italy (2002). SIAM is widely recognized as the originator and the U.S. anchor of this important meeting whose topics concerns the applied mathematics and computation associated with combustion and reactive flow. In particular, the International Numerical Combustion Symposiums have become one of the international major venues for research on direct simulation and modeling turbulent reacting flow. It is also one of the major international venues for theoretical work in reacting flows. This meeting drew approximately 200 participants from 30 countries whose research included the topics in turbulence, kinetics, detonation, flames, pollution, microgravity, micro-combustion, ignition, applications of parallel processing, tera-scale computation of combustion applications, material synthesis, droplets and sprays, heterogeneous combustion, energetic materials (propellants and explosives), engine and furnace combustion, fires, numerical methods and, software engineering for combustion applications.

None

2004-09-23T23:59:59.000Z

203

Jet Ignition Research for Clean Efficient Combustion Engines Prasanna Chinnathambi, Abdullah Karimi, Manikanda Rajagopal, Razi Nalim  

E-Print Network [OSTI]

-chamber internal combustion engines and in innovative pressure-gain combustors for gas turbine engines. Jet engines using low-cost, low-carbon natural gas need improved methods for ignition of lean mixtures rotor combustor. A wave rotor combustion chamber is best ignited with a jet of hot gas that may come

Zhou, Yaoqi

204

Surface Combustion Microengines Based on Photocatalytic Oxidations of Hydrocarbons at Room Temperature  

Science Journals Connector (OSTI)

Surface Combustion Microengines Based on Photocatalytic Oxidations of Hydrocarbons at Room Temperature ... For instance internal combustion engines depend on an exothermic combustion of a mixture of hydrocarbon fuel or hydrogen and air, inside a sealed cylinder equipped with a movable piston.1 Once ignited using an electrical or compression heating system, the combustion products have more available energy than the original mixture, and this energy can be translated into work by driving the piston. ... One possible explanation for the lack of data is that the temperature increase of surface or suspended colloids is hard to measure due to fast heat dissipation through solid bond vibrations or solvent molecules in continuous UV radiation. ...

Ming Su; Vinayak P. Dravid

2005-09-22T23:59:59.000Z

205

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the ninth quarter April-June 2002 in the following task areas: Task 1--Oxygen Enhanced Combustion, Task 2--Oxygen Transport Membranes, Task 3--Economic Evaluation and Task 4--Program Management. The program is proceeding in accordance with the objectives for the third year. Full-scale testing using the Industrial Boiler Simulation Facility (ISBF) at Alstom Power was completed. The pilot scale experiments to evaluate the effect of air preheat and transport air stoichiometric ratio (SR) on NOx emissions were conducted at the University of Utah. Combustion modeling activities continued with full-scale combustion test furnace simulations. An OTM element was tested in Praxair's single tube high-pressure test facility and two thermal cycles were completed. PSO1d elements of new dimension were tested resulting in a lower flux than previous PSO1d elements of different dimensions, however, no element deformation was observed. Economic evaluation has confirmed the advantage of oxygen-enhanced combustion. Two potential host beta sites have been identified and proposals submitted.

David R. Thompson; Lawrence E. Bool; Jack C. Chen

2002-08-01T23:59:59.000Z

206

Advanced Combustion R&D Selections  

Broader source: Energy.gov [DOE]

In 2013, the Department of Energy made several project selections under the Fossil Energy Advanced Combustion R&D program. Through these four selections, nearly $37 million, $26 million from the Energy Department and $11 million in cost-share from industry, universities, and other research institutions, are being committed over four years to address CO2 compliance required by the proposed regulations to reduce CO2 emissions.

207

Fluid Bed Combustion Applied to Industrial Waste  

E-Print Network [OSTI]

of its relatively recent application to coal fired steam production, fluid beds have been uti lized in industry for over 60 years. Beginning in Germany in the twenties for coal gasification, the technology was applied to catalytic cracking of heavy... system cost), use of minimum excess air required, and maintaining the min"imum reactor temperature neces sary to sustain combustion. For superautogenous fuels, where incineration. only is desired, minimum capital cost is achieved by using direct bed...

Mullen, J. F.; Sneyd, R. J.

208

Coal Combustion Products Extension Program  

SciTech Connect (OSTI)

This final project report presents the activities and accomplishments of the ''Coal Combustion Products Extension Program'' conducted at The Ohio State University from August 1, 2000 to June 30, 2005 to advance the beneficial uses of coal combustion products (CCPs) in highway and construction, mine reclamation, agricultural, and manufacturing sectors. The objective of this technology transfer/research program at The Ohio State University was to promote the increased use of Ohio CCPs (fly ash, FGD material, bottom ash, and boiler slag) in applications that are technically sound, environmentally benign, and commercially competitive. The project objective was accomplished by housing the CCP Extension Program within The Ohio State University College of Engineering with support from the university Extension Service and The Ohio State University Research Foundation. Dr. Tarunjit S. Butalia, an internationally reputed CCP expert and registered professional engineer, was the program coordinator. The program coordinator acted as liaison among CCP stakeholders in the state, produced information sheets, provided expertise in the field to those who desired it, sponsored and co-sponsored seminars, meetings, and speaking at these events, and generally worked to promote knowledge about the productive and proper application of CCPs as useful raw materials. The major accomplishments of the program were: (1) Increase in FGD material utilization rate from 8% in 1997 to more than 20% in 2005, and an increase in overall CCP utilization rate of 21% in 1997 to just under 30% in 2005 for the State of Ohio. (2) Recognition as a ''voice of trust'' among Ohio and national CCP stakeholders (particularly regulatory agencies). (3) Establishment of a national and international reputation, especially for the use of FGD materials and fly ash in construction applications. It is recommended that to increase Ohio's CCP utilization rate from 30% in 2005 to 40% by 2010, the CCP Extension Program be expanded at OSU, with support from state and federal agencies, utilities, trade groups, and the university, to focus on the following four specific areas of promise: (a) Expanding use in proven areas (such as use of fly ash in concrete); (b) Removing or reducing regulatory and perceptual barriers to use (by working in collaboration with regulatory agencies); (c) Developing new or under-used large-volume market applications (such as structural fills); and (d) Placing greater emphasis on FGD byproducts utilization.

Tarunjit S. Butalia; William E. Wolfe

2006-01-11T23:59:59.000Z

209

Combustion powered linear actuator  

DOE Patents [OSTI]

The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

Fischer, Gary J. (Albuquerque, NM)

2007-09-04T23:59:59.000Z

210

US DRIVE Advanced Combustion and Emission Control Technical Team Roadmap  

Broader source: Energy.gov [DOE]

The ACEC focuses on advanced engine and aftertreatment technology for three major combustion strategies: (1) Low-Temperature Combustion, (2) Dilute Gasoline combustion, and (3) Clean Diesel Combustion.

211

Assessment of Combustion and Turbulence Models for the Simulation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion and Turbulence Models for the Simulation of Combustion Processes in a DI Diesel Engine Assessment of Combustion and Turbulence Models for the Simulation of Combustion...

212

US DRIVE Advanced Combustion and Emission Control Technical Team...  

Energy Savers [EERE]

for three major combustion strategies: (1) Low-Temperature Combustion, (2) Dilute Gasoline combustion, and (3) Clean Diesel Combustion. acecroadmapjune2013.pdf More Documents...

213

NETL: Combustion Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Abbreviations & Acronyms Abbreviations & Acronyms Reference Shelf Solicitations & Awards Abbreviations & Acronyms The Combustion Technologies Product uses a number of abbreviations and acronyms. This web page gives you a definition of frequently used terms, as follows: 1½-Generation PFBC -- A PFBC plant where the hot (about 1400ºF) PFBC exhaust gases are used as a vitiated air supply for a natural gas combustor supplying high-temperature gas (above 2000ºF) to a combustion turbine expander (synonym for "PFB-NGT"). 1st-Generation PFBC -- Commercial PFBC technology where an unfired low-temperature (below 1650ºF) ruggedized turbine expander expands PFBC exhaust gases (synonym for "PFB-EGT"). 2nd-Generation PFBC (see synonyms: "APFBC," "PFB-CGT") -- Advanced PFBC where a carbonizer (mild gasifier) provides hot (about 1400ºF) coal-derived synthetic fuel gas to a special topping combustor. The carbonizer char is burned in the PFBC, and the PFBC exhaust is used as a hot (about 1400ºF) vitiated air supply for the topping combustor. The syngas and vitiated air are burned in a topping combustor to provide high-temperature gas (above 1700ºF) to a combustion turbine expander.

214

NETL: Combustion Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nebraska Public Power District's Sheldon Station with APFBC Technology Nebraska Public Power District's Sheldon Station with APFBC Technology FBC Repower APFBC AES Greenidge APFBC Dan River FBC, APFBC Four Corners CHIPPS H.F. Lee Products Summary Sheldon Summary APFBC Sheldon GFBCC Sheldon APFBC L.V. Sutton Contents: APFBC Repowering Project Summary Key Features Site Layout Performance Environmental Characteristics Cost Other Combustion Systems Repowering Study Links: A related study is underway that would repower Sheldon Unit 1 and Unit 2 with gasification fluidized-bed combined cycle technology (GFBCC). CLICK HERE to find out more about repowering the Sheldon station with GFBCC instead. APFBC Repowering Project Summary Click on picture to enlarge Advanced circulating pressurized fluidized-bed combustion combined cycle systems (APFBC) are systems with jetting-bed pressurized fluidized-bed (PFB) carbonizer/gasifier and circulating PFBC combustor. The PFB carbonizer and PFBC both operate at elevated pressures (10 to 30 times atmospheric pressure) to provide syngas for operating a gas turbine topping combustor giving high cycle energy efficiency. The remaining char from the PFB carbonizer is burned in the pressurized PFBC. The combustion gas from the PFB also feeds thermal energy to the gas turbine topping combustor. This provides combined cycle plant efficiency on coal by providing the opportunity to generate electricity using both high efficiency gas turbines and steam.

215

Stretch Efficiency for Combustion Engines: Exploiting New Combustion...  

Broader source: Energy.gov (indexed) [DOE]

boost. * H 2 enrichment extends lean limit, improves C p C v ratio, lowers cylinder heat loss, assists cold start, lowers combustion irreversibility. IC Engine Work Reformer...

216

Oxy-Combustion Boiler Material Development  

SciTech Connect (OSTI)

Under U.S. Department of Energy Cooperative Agreement No. DE-NT0005262 Foster Wheeler North America Corp conducted a laboratory test program to determine the effect of oxy-combustion on boiler tube corrosion. In this program, CFD modeling was used to predict the gas compositions that will exist throughout and along the walls of air-fired and oxy-fired boilers operating with low to high sulfur coals. Test coupons of boiler tube materials were coated with deposits representative of those coals and exposed to the CFD predicted flue gases for up to 1000 hours. The tests were conducted in electric tube furnaces using oxy-combustion and air-fired flue gases synthesized from pressurized cylinders. Following exposure, the test coupons were evaluated to determine the total metal wastage experienced under air and oxy-combustions conditions and materials recommendations were made. Similar to air-fired operation, oxy-combustion corrosion rates were found to vary with the boiler material, test temperature, deposit composition, and gas composition. Despite this, comparison of air-fired and oxy-fired corrosion rates showed that oxy-firing rates were, for the most part, similar to, if not lower than those of air-firing; this finding applied to the seven furnace waterwall materials (wrought and weld overlay) and the ten superheater/reheater materials (wrought and weld overlay) that were tested. The results of the laboratory oxy-combustion tests, which are based on a maximum bulk flue gas SO{sub 2} level of 3200 ppmv (wet) / 4050 ppmv (dry), suggest that, from a corrosion standpoint, the materials used in conventional subcritical and supercritical, air-fired boilers should also be suitable for oxy-combustion retrofits. Although the laboratory test results are encouraging, they are only the first step of a material evaluation process and it is recommended that follow-on corrosion tests be conducted in coal-fired boilers operating under oxy-combustion to provide longer term (one to two year) data. The test program details and data are presented herein.

Michael Gagliano; Andrew Seltzer; Hans Agarwal; Archie Robertson; Lun Wang

2012-01-31T23:59:59.000Z

217

Oxy-Combustion Boiler Material Development  

SciTech Connect (OSTI)

Under U.S. Department of Energy Cooperative Agreement No. DE-NT0005262 Foster Wheeler North America Corp conducted a laboratory test program to determine the effect of oxy-combustion on boiler tube corrosion. In this program, CFD modeling was used to predict the gas compositions that will exist throughout and along the walls of air-fired and oxy-fired boilers operating with low to high sulfur coals. Test coupons of boiler tube materials were coated with deposits representative of those coals and exposed to the CFD predicted flue gases for up to 1000 hours. The tests were conducted in electric tube furnaces using oxy-combustion and air-fired flue gases synthesized from pressurized cylinders. Following exposure, the test coupons were evaluated to determine the total metal wastage experienced under air and oxy-combustions conditions and materials recommendations were made. Similar to air-fired operation, oxy-combustion corrosion rates were found to vary with the boiler material, test temperature, deposit composition, and gas composition. Despite this, comparison of air-fired and oxy-fired corrosion rates showed that oxy-firing rates were, for the most part, similar to, if not lower than those of air-firing; this finding applied to the seven furnace waterwall materials (wrought and weld overlay) and the ten superheater/reheater materials (wrought and weld overlay) that were tested. The results of the laboratory oxy-combustion tests, which are based on a maximum bulk flue gas SO2 level of 3200 ppmv (wet) / 4050 ppmv (dry), suggest that, from a corrosion standpoint, the materials used in conventional subcritical and supercritical, air-fired boilers should also be suitable for oxy-combustion retrofits. Although the laboratory test results are encouraging, they are only the first step of a material evaluation process and it is recommended that follow-on corrosion tests be conducted in coal-fired boilers operating under oxy-combustion to provide longer term (one to two year) data. The test program details and data are presented herein.

Gagliano, Michael; Seltzer, Andrew; Agarwal, Hans; Robertson, Archie; Wang, Lun

2012-01-31T23:59:59.000Z

218

Sandia National Laboratories: Diesel Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Diesel Combustion Caterpillar, Sandia CRADA Opens Door to Multiple Research Projects On April 17, 2013, in Capabilities, Computational Modeling & Simulation, CRF, Materials...

219

Improve Your Boiler's Combustion Efficiency  

SciTech Connect (OSTI)

This revised ITP tip sheet on boiler combustion efficiency provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

220

Municipal Waste Combustion (New Mexico)  

Broader source: Energy.gov [DOE]

This rule establishes requirements for emissions from, and design and operation of, municipal waste combustion units. "Municipal waste" means all materials and substances discarded from residential...

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

ALS Evidence Confirms Combustion Theory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

are produced, generally, when insufficient oxygen or other factors result in incomplete combustion of organic matter (e.g., in engines and incinerators, when biomass burns in...

222

Numerical Modeling of HCCI Combustion  

Broader source: Energy.gov (indexed) [DOE]

Numerical Modeling of HCCI Combustion Salvador M. Aceves, Daniel L. Flowers, J. Ray Smith, Joel Martinez-Frias, Francisco Espinosa-Loza, Tim Ross, Bruce Buchholz, Nick...

223

Fluidized bed combustion picks up steam  

SciTech Connect (OSTI)

Industrial interest in fluidized-bed combustion (FBC) continues, although the technology has been slow to enter the marketplace. Two FBC pilot plants funded by DOE and one commercial size project are in operation. FBC designs and commercial warranties are already available from the boiler industry, but 1981 was the first year to see significant numbers of privately-funded orders, now numbering 38 out of 50 boilers. Manufacturers are working on a universal boiler able to accept any fuel, but potential users are wary of new technology without a long-term demonstration of reliability and economics. There is interest in second generation designs, a new shallow-bed design suitable for retrofitting, and circulating bed types that decouple the combustion system from the heat removal system. (DCK)

Lawn, J.

1982-02-01T23:59:59.000Z

224

Space shuttle based microgravity smoldering combustion experiments  

E-Print Network [OSTI]

zone, and smolder heat of combustion (energy per unit massand Q is the smolder heat of combustion. The mass fluxes ofdata. The smolder heat of combustion is not well determined

Walther, David C; Fernandez-Pello, Carlos; Urban, David L

1999-01-01T23:59:59.000Z

225

Combustion Catalysts in Industry- An Update  

E-Print Network [OSTI]

applications of combustion catalysts for coal are presented. Combustion efficiency and calculations are discussed, followed by an explanation of the theories of combustion catalysis and a review of three case histories....

Merrell, G. A.; Knight, R. S.

226

Self-tuning regulators for combustion oscillations  

Science Journals Connector (OSTI)

...interaction of acoustic waves and combustion processes. An abundant literature...numerical simulations of the combustion processes and coupled fluid dynamics...nonlinear analysis of controlled combustion processes. In Proc. 1999 IEEE Int...

2003-01-01T23:59:59.000Z

227

Advanced Combustion Operation in a Compression Ignition Engine  

Science Journals Connector (OSTI)

In this study, advanced combustion operating modes were investigated on a DDC/VM Motori 2.5 L, four-cylinder, turbocharged, common rail, direct-injection light-duty diesel engine, with exhaust emission being the main focus. ... This process is based on work from Al-Qurashi et al., who conducted fundamental flame studies that showed that the thermal effect of EGR enhances the oxidative reactivity of diesel soot. ... Heywood, J. B. Internal Combustion Engine Fundamentals; McGraw-Hill Book Company: New York, 1988; p 930. ...

Gregory K. Lilik; José Martín Herreros; André L. Boehman

2008-12-15T23:59:59.000Z

228

Closed loop air cooling system for combustion turbines  

DOE Patents [OSTI]

Convective cooling of turbine hot parts using a closed loop system is disclosed. Preferably, the present invention is applied to cooling the hot parts of combustion turbine power plants, and the cooling provided permits an increase in the inlet temperature and the concomitant benefits of increased efficiency and output. In preferred embodiments, methods and apparatus are disclosed wherein air is removed from the combustion turbine compressor and delivered to passages internal to one or more of a combustor and turbine hot parts. The air cools the combustor and turbine hot parts via convection and heat is transferred through the surfaces of the combustor and turbine hot parts.

Huber, David John (North Canton, OH); Briesch, Michael Scot (Orlando, FL)

1998-01-01T23:59:59.000Z

229

International Portfolio  

Broader source: Energy.gov [DOE]

The U.S.-China Clean Energy Research Center (CERC) is a multi-year international effort focused on developing and implementing energy efficiency technologies in both the USA and in China. The...

230

California Natural Gas International Deliveries (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Deliveries (Million Cubic Feet) California Natural Gas International Deliveries (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

231

California Natural Gas International Receipts (Million Cubic...  

U.S. Energy Information Administration (EIA) Indexed Site

Receipts (Million Cubic Feet) California Natural Gas International Receipts (Million Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9 2000's...

232

Combustion-thermoelectric tube  

SciTech Connect (OSTI)

In direct combustion-thermoelectric energy conversion, direct fuel injection and reciprocation of the air flowing in a solid matrix are combined with the solid conduction to allow for obtaining super-adiabatic temperatures at the hot junctions. While the solid conductivity is necessary, the relatively large thermal conductivity of the available high-temperature thermoelectric materials (e.g., Si-Ge alloys) results in a large conduction loss from the hot junctions and deteriorates the performance. Here a combustion-thermoelectric tube is introduced and analyzed. Radially averaged temperatures are used for the fluid and solid phases. A combination of external cooling of the cold junctions, and direct injection of the fuel, has been used to increase the energy conversion efficiency for low thermal conductivity, high-melting temperature thermoelectric materials. The parametric study (geometry, flow, stoichiometry, materials) shows that with the current high figure of merit, high temperature Si{sub 0.7}Ge{sub 0.3} properties, a conversion efficiency of about 11% is achievable. With lower thermal conductivities for these high-temperature materials, efficiencies about 25% appear possible. This places this energy conversion in line with the other high efficiency, direct electric power generation methods.

Park, C.W.; Kaviany, M.

1999-07-01T23:59:59.000Z

233

Ultrarich Filtration Combustion of Ethane  

Science Journals Connector (OSTI)

Ultrarich filtration combustion of ethane is studied in a porous medium composed of alumina spheres with the aim to achieve optimized conversion to hydrogen and syngas. ... Dhamrat, R. S.; Ellzey, J. L.Numerical and experimental study of the conversion of methane to hydrogen in a porous media reactor Combust. ...

Mario Toledo; Khriscia Utria; Alexei V. Saveliev

2014-01-28T23:59:59.000Z

234

A Generalized Pyrolysis Model for Combustible Solids  

E-Print Network [OSTI]

model. ?H c is the heat of combustion, and the ratio ?H c /?may have widely varying heats of combustion (CO vs. gaseous

Lautenberger, Chris

2007-01-01T23:59:59.000Z

235

Optimization of Advanced Diesel Engine Combustion Strategies...  

Broader source: Energy.gov (indexed) [DOE]

Optimization of Advanced Diesel Engine Combustion Strategies Optimization of Advanced Diesel Engine Combustion Strategies 2010 DOE Vehicle Technologies and Hydrogen Programs Annual...

236

Advanced Combustion Concepts - Enabling Systems and Solutions...  

Broader source: Energy.gov (indexed) [DOE]

engine * Integration of proposed air path and HCCI combustion control strategies into ECU software * Prototype level 2 updates and proof of combustion concept for vehicle readiness...

237

Advanced Combustion Concepts - Enabling Systems and Solutions...  

Broader source: Energy.gov (indexed) [DOE]

engine installed and vehicle available for application, emission and fuel economy optimization with advanced combustion modes. 4 Advanced combustion control strategy, capable of...

238

Premix charge, compression ignition combustion system optimization...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Premix charge, compression ignition combustion system optimization Premix charge, compression ignition combustion system optimization Presentation given at DEER 2006, August 20-24,...

239

Vehicle Technologies Office: Advanced Combustion Engines | Department...  

Broader source: Energy.gov (indexed) [DOE]

Batteries Fuel Efficiency & Emissions Combustion Engines Fuel Effects on Combustion Idle Reduction Emissions Waste Heat Recovery Lightweighting Parasitic Loss Reduction Lubricants...

240

Sandia Hydrogen Combustion Research | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Sandia Hydrogen Combustion Research Sandia Hydrogen Combustion Research Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008...

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Integrated Nozzle Flow, Spray, Combustion, & Emission Modeling...  

Broader source: Energy.gov (indexed) [DOE]

Spray, Combustion, & Emission Modeling using KH-ACT Primary Breakup Model & Detailed Chemistry Integrated Nozzle Flow, Spray, Combustion, & Emission Modeling using KH-ACT Primary...

242

Coal combustion by-products: State regulatory overview  

SciTech Connect (OSTI)

Coal combustion by-products (CCBs) are generated from the combustion of coal for energy production. Approximately 82 million tons of CCBs are produced each year by electric utilities. (1991 Coal Combustion By-Product Production and Use, American Coal Ash Association, 1992.) There are several common types of CCBs produced by coal combustion--fly ash, bottom ash, boiler slag, flue gas desulfurization material (FGD) and fluidized bed combustion byproducts (FBC). Some CCBs, such as fly ash, have pozzolanic properties and may have cementitious properties, both of which are advantageous for engineering, construction and waste remediation applications. The American Society for Testing Materials (ASTM) in ASTM C-618 has created two classifications of useful and quality coal ash, Class F ash and Class C ash. Each class of coal ash has different pozzolanic and cementitious characteristics. Coal ash can be utilized in many manufacturing, mining, agricultural, engineering, construction and waste remediation applications. This is a review by state of regulations concerning coal combustion by-products.

Jagiella, D. [Howard and Howard Attorneys, Peoria, IL (United States)

1996-11-01T23:59:59.000Z

243

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the eleventh quarter, October-December 2002, in the following task areas: Task 1 - Oxygen Enhanced Combustion, Task 2 - Oxygen Transport Membranes, Task 3 - Economic Evaluation and Task 4 - Program Management. The program is proceeding in accordance with the objectives for the third year. Pilot scale experiments conducted at the University of Utah were aimed at confirming the importance of oxygen injection strategy for different types of burners. CFD modeling at REI was used to better understand the potential for increased corrosion under oxygen enhanced combustion conditions. Data from a full-scale demonstration test in Springfield, MO were analyzed. OTM element development continued with preliminary investigation of an alternative method of fabrication of PSO1d elements. OTM process development continued with long-term testing of a PSO1d element. Economic evaluation has confirmed the advantage of oxygen-enhanced combustion. Proposals have been submitted for two additional beta test sites. A first commercial proposal has been submitted. Economic analysis of a beta site test performance was conducted.

David R. Thompson; Lawrence E. Bool; Jack C. Chen

2003-02-01T23:59:59.000Z

244

Combustion of viscous hydrocarbons  

SciTech Connect (OSTI)

A method is described for utilizing viscous hydrocarbons as combustible pre-atomized fuels, comprising: (A) forming a hydrocarbon-in-water emulsion using an effective amount of a surfactant package comprising at least one water-soluble surfactant, the hydrocarbon-in-water emulsion (1) comprising a hydrocarbon characterized by API gravity of about 20/sup 0/ API or less, viscosity of about 1000 centipoise or greater at 212/sup 0/F., a paraffin content of about 50% by weight or less and, an aromatic content of about 15% by weight or greater, and (2) having a hydrocarbon water ratio from about 60:40 to about 90:10 by volume; and (B) burning the resultant hydrocarbon-in-water emulsion.

Hayes, M.E.; Hrebenar, K.R.; Murphy, P.L.; Futch, L.E. Jr.; Deal, J.F. III; Bolden, P.L. Jr.

1987-08-04T23:59:59.000Z

245

Combustion of viscous hydrocarbons  

SciTech Connect (OSTI)

A method is described for utilizing viscous hydrocarbons as combustible fuels comprising: (A) forming a hydrocarbosol using a surfactant package in a proportion of about 1:100 to about 1:20,000 by weight based on hydrocarbon, (1) the surfactant package comprising (a) at least one water-soluble surfactant, an effective amount of which surfactant promotes emulsification of a hydrocarbon with API gravity of about 20/sup 0//sup o/ API or less; and (b) at least one water-soluble bioemulsifier, being a microboally-derived substance which predominantly resides at hydrocarbon/water interfaces to substantially surround hydrocarbon droplets in hydrocarbon-in-water emulsions; (2) the hydrocarbosol (a) comprising a hydrocarbon characterized by an API gravity of about 20/sup 0//sup o/ API or less; (b) having a hydrocarbon:water ratio of about 70:30 by volume; and (B) burning the resultant hydrocarbosol.

Hayes, M.E.; Hrebenar, K.R.; Murphy, P.L.; Futch, L.E. Jr.; Deal, J.F. III

1986-10-21T23:59:59.000Z

246

NETL: Combustion Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gas Turbines for APFBC Gas Turbines for APFBC FBC Repower Simple Description Detailed Description APFBC Specs GTs for APFBC Suited for Repowering Existing Power Plants with Advanced Pressurized Fluidized-Bed Combined Cycles APFBC combined cycles have high energy efficiency levels because they use modern, high-temperature, high-efficiency gas turbines as the core of a combined power cycle. This web page discusses a current U.S. Department of Energy project that is evaluating combustion turbines suited for repowering existing steam plants. The natural-gas-fueled version of the Siemens Westinghouse Power Corporation W501F. Modified versions of this gas turbine core are suited for operating in APFBC power plants. Contents: Introduction APFBC Repowering Considerations

247

Post-Combustion Carbon Capture Research | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Post-Combustion Carbon Capture Research Post-Combustion Carbon Capture Research Post-Combustion Carbon Capture Research Fossil fuel fired electric generating plants are the cornerstone of America's central power system. Currently, the existing fossil fuel fleet accounts for about two-thirds of all electricity generated domestically, over 40% from coal alone. Electricity demand is expected to increase dramatically over the next 30 years, and adding new generating capacity typically requires long lead time. In the meantime, the United States will continue to rely on existing plants to provide a substantial amount of affordable electric power for years to come. Retrofitting the Existing Fleet of Power Plants There is vast potential for retrofitting carbon capture technologies to the existing fossil fuel fleet. In 2011, coal-fired power plants produced

248

NETL: Advanced NOx Emissions Control: Control Technology - NOx Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Control Options and Integration Control Options and Integration Reaction Engineering International (REI) is optimizing the performance of, and reduce the technical risks associated with the combined application of low-NOx firing systems (LNFS) and post combustion controls through modeling, bench-scale testing, and field verification. Teaming with REI are the University of Utah and Brown University. During this two-year effort, REI will assess real-time monitoring equipment to evaluate waterwall wastage, soot formation, and burner stoichiometry, demonstrate analysis techniques to improve LNFS in combination with reburning/SNCR, assess selective catalytic reduction catalyst life, and develop UBC/fly ash separation processes. The REI program will be applicable to coal-fired boilers currently in use in the United States, including corner-, wall-, turbo-, and cyclone-fired units. However, the primary target of the research will be cyclone boilers, which are high NOx producing units and represent about 20% of the U.S. generating capacity. The results will also be applicable to all U.S. coals. The research will be divided into four key components:

249

Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion  

Broader source: Energy.gov [DOE]

Applied low temperature combustion to the Navistar 6.4L V8 engine with 0.2g NOx/bhp-hr operation attained at the rated 16.5 BMEP

250

Combustion characterization of beneficiated coal-based fuels  

SciTech Connect (OSTI)

The Pittsburgh Energy Technology Center of the US Department of Energy has contracted with Combustion Engineering, Inc. (CE) to perform a three-year project on Combustion Characterization of Beneficiated Coal-Based Fuels.'' The beneficiated coals are produced by other contractors under the DOE Coal Preparation Program. Several contractor-developed advanced coal cleaning processes are being run at the cleaning facility in Homer City, Pennsylvania, to produce 20-ton batches of fuels for shipment to CE's laboratory in Windsor, Connecticut. CE then processes the products into either a coal-water fuel (CVVT) or a dry microfine pulverized coal (DMPC) form for combustion testing. The objectives of this project include: (1) the development of an engineering data base which will provide detailed information on the properties of BCFs influencing combustion, ash deposition, ash erosion, particulate collection, and emissions; and (2) the application of this technical data base to predict the performance and economic impacts of firing the BCFs in various commercial boiler designs. The technical approach used to develop the technical data includes: bench-scale fuel property, combustion, and ash deposition tests; pilot-scale combustion and ash effects tests; and full-scale combustion tests. Subcontractors to CE to perform parts of the test work are the Massachusetts Institute of Technology (MIT), Physical Science, Inc. Technology Company (PSIT) and the University of North Dakota Energy and Environmental Research Center (UNDEERC). Twenty fuels will be characterized during the three-year base program: three feed coals, fifteen BCFS, and two conventionally cleaned coals for full-scale tests. Approximately, nine BCFs will be in dry microfine coal (DMPC) form, and six BCFs will be in coal-water fuel (CWF) form. Additional BCFs would be characterized during optional project supplements.

Chow, O.K.; Nsakala, N.Y.

1990-11-01T23:59:59.000Z

251

Hybrid Combustion-Gasification Chemical Looping  

SciTech Connect (OSTI)

For the past several years Alstom Power Inc. (Alstom), a leading world-wide power system manufacturer and supplier, has been in the initial stages of developing an entirely new, ultra-clean, low cost, high efficiency power plant for the global power market. This new power plant concept is based on a hybrid combustion-gasification process utilizing high temperature chemical and thermal looping technology The process consists of the oxidation, reduction, carbonation, and calcination of calcium-based compounds, which chemically react with coal, biomass, or opportunity fuels in two chemical loops and one thermal loop. The chemical and thermal looping technology can be alternatively configured as (i) a combustion-based steam power plant with CO{sub 2} capture, (ii) a hybrid combustion-gasification process producing a syngas for gas turbines or fuel cells, or (iii) an integrated hybrid combustion-gasification process producing hydrogen for gas turbines, fuel cells or other hydrogen based applications while also producing a separate stream of CO{sub 2} for use or sequestration. In its most advanced configuration, this new concept offers the promise to become the technology link from today's Rankine cycle steam power plants to tomorrow's advanced energy plants. The objective of this work is to develop and verify the high temperature chemical and thermal looping process concept at a small-scale pilot facility in order to enable AL to design, construct and demonstrate a pre-commercial, prototype version of this advanced system. In support of this objective, Alstom and DOE started a multi-year program, under this contract. Before the contract started, in a preliminary phase (Phase 0) Alstom funded and built the required small-scale pilot facility (Process Development Unit, PDU) at its Power Plant Laboratories in Windsor, Connecticut. Construction was completed in calendar year 2003. The objective for Phase I was to develop the indirect combustion loop with CO{sub 2} separation, and also syngas production from coal with the calcium sulfide (CaS)/calcium sulfate (CaSO{sub 4}) loop utilizing the PDU facility. The results of Phase I were reported in Reference 1, 'Hybrid Combustion-Gasification Chemical Looping Coal Power Development Technology Development Phase I Report' The objective for Phase II was to develop the carbonate loop--lime (CaO)/calcium carbonate (CaCO{sub 3}) loop, integrate it with the gasification loop from Phase I, and ultimately demonstrate the feasibility of hydrogen production from the combined loops. The results of this program were reported in Reference 3, 'Hybrid Combustion-Gasification Chemical Looping Coal Power Development Technology Development Phase II Report'. The objective of Phase III is to operate the pilot plant to obtain enough engineering information to design a prototype of the commercial Chemical Looping concept. The activities include modifications to the Phase II Chemical Looping PDU, solids transportation studies, control and instrumentation studies and additional cold flow modeling. The deliverable is a report making recommendations for preliminary design guidelines for the prototype plant, results from the pilot plant testing and an update of the commercial plant economic estimates.

Herbert Andrus; Gregory Burns; John Chiu; Gregory Lijedahl; Peter Stromberg; Paul Thibeault

2009-01-07T23:59:59.000Z

252

Staged Combustion of Pulverized Coal  

Science Journals Connector (OSTI)

The emissions of nitrogen oxides are much higher with the combustion of fossil fuels containing organic bound nitrogen compounds than with clean fuels like natural gas and light distillate oil. During combusti...

H. Kremer; R. Mechenbier; W. Schulz

1987-01-01T23:59:59.000Z

253

Light Duty Efficient Clean Combustion  

Broader source: Energy.gov (indexed) [DOE]

fuel efficiency over the FTP city drive cycle by 10.5% over today's state-of-the-art diesel engine. Develop & design an advanced combustion system that synergistically meets...

254

20 - Chemical looping combustion (CLC)  

Science Journals Connector (OSTI)

Abstract: Chemical-looping combustion (CLC) is a new combustion technology with inherent separation of the greenhouse gas CO2. The technology involves the use of a metal oxide as an oxygen carrier which transfers oxygen from combustion air to the fuel, and hence a direct contact between air and fuel is avoided. Two inter-connected fluidized beds, i.e. fuel reactor and air reactor, are used in the process. The outlet gas from the fuel reactor consists ideally of CO2 and H2O, and the latter is easily removed by condensation. This chapter presents the basic principles, gives an overview of oxygen-carrier materials and operational experiences, discusses the application to gaseous, liquid and solid fuels, and the use for combustion as well as for hydrogen production.

A. Lyngfelt

2013-01-01T23:59:59.000Z

255

Chemical Kinetics of Combustion Processes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Combustion Processes Hai Wang B. Yang, J. Camacho, S. Lieb, S. Memarzadeh, S.-K. Gao and S. Koumlis University of Southern California 2010 CEFRC Conference Benzene + O( 3 P) ...

256

Plum Combustion | Open Energy Information  

Open Energy Info (EERE)

Plum Combustion Plum Combustion Jump to: navigation, search Name Plum Combustion Place Atlanta, Georgia Product Combustion technology, which reduces NOx-emissions. Coordinates 33.748315°, -84.391109° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.748315,"lon":-84.391109,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

257

Energy Department Awards $2.6 Million to Boost Combustion Efficiency in  

Broader source: Energy.gov (indexed) [DOE]

2.6 Million to Boost Combustion 2.6 Million to Boost Combustion Efficiency in Industrial Boilers Energy Department Awards $2.6 Million to Boost Combustion Efficiency in Industrial Boilers September 26, 2005 - 10:53am Addthis WASHINGTON, DC-- The U.S. Department of Energy (DOE) today announced the selection of three new combustion technology research and development (R&D) projects that will receive nearly $2.6 million in total cost-shared funding over the next two years. The selected R&D teams plan to develop advanced industrial boilers that deliver superior energy and environmental performance. By 2020, these boiler technologies are expected to reduce energy use in industrial boilers by seven percent, saving industry $2 billion per year in energy costs. "Combustion systems use nearly three-quarters of all energy consumed in

258

*whamilto@mines.edu Hamilton, W.B., 2007, Earth's first two billion years--The era of internally mobile crust, in Hatcher, R.D., Jr., Carlson, M.P., McBride, J.H., and Martnez Cataln,  

E-Print Network [OSTI]

233 *whamilto@mines.edu Hamilton, W.B., 2007, Earth's first two billion years--The era of internally mobile crust Warren B. Hamilton* Department of Geophysics, Colorado School of Mines, Golden;234 Hamilton INTRODUCTION This essay is a study in alternatives. Most current interpreta- tions of geodynamics

Hamilton, Warren B.

259

Combustion method for simultaneous control of nitrogen oxides and products of incomplete combustion  

SciTech Connect (OSTI)

A method is described for combusting material with controlled generation of both nitrogen oxides and products of incomplete combustion comprising: (A) combusting material in a first combustion zone to produce gaseous exhaust containing products of incomplete combustion and products of complete combustion; (B) passing the gaseous exhaust from the first combustion zone into a second combustion zone having a width and an axial direction; (C) injecting through a lance with an orientation substantially parallel to said axial direction at least one stream of oxidant, without fuel, having a diameter less than 1/100 of the width of the second combustion zone and having an oxygen concentration of at least 30% into the second combustion zone at a high velocity of at least 300 feet per second; (D) aspirating products of incomplete combustion into the high velocity oxidant; (E) combusting products of incomplete combustion aspirated into the high velocity oxidant with high velocity oxidant within the second combustion zone to carry out a stable combustion by the mixing of the aspirated products of incomplete combustion with the high velocity oxidant; and (F) spreading out the combustion reaction by aspiration of products of complete combustion into the oxidant, said products of complete combustion also serving as a heat sink, to inhibit NO[sub x] formation.

Ho, Min-Da.

1993-05-25T23:59:59.000Z

260

An investigation into the feasibility of an external combustion, steam injected gas turbine  

E-Print Network [OSTI]

output of the turbine without increasing the work required for compression. Second, the steam may be generated with waste 15 heat from the combustion process. In an internal combustion gas turbine, this would result in an increased work output per... which are: 1. Gas Turbine Engine 2. Heat Exchanger Unit 3. Steam Generator Unit 4. Dynamometer 26 A detailed description of the equipment used in the experiment will be presented in the section entitled Ap- paratus since the purpose...

Ford, David Bruce

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Chemical Looping Combustion Kinetics  

SciTech Connect (OSTI)

One of the most promising methods of capturing CO{sub 2} emitted by coal-fired power plants for subsequent sequestration is chemical looping combustion (CLC). A powdered metal oxide such as NiO transfers oxygen directly to a fuel in a fuel reactor at high temperatures with no air present. Heat, water, and CO{sub 2} are released, and after H{sub 2}O condensation the CO{sub 2} (undiluted by N{sub 2}) is ready for sequestration, whereas the nickel metal is ready for reoxidation in the air reactor. In principle, these processes can be repeated endlessly with the original nickel metal/nickel oxide participating in a loop that admits fuel and rejects ash, heat, and water. Our project accumulated kinetic rate data at high temperatures and elevated pressures for the metal oxide reduction step and for the metal reoxidation step. These data will be used in computational modeling of CLC on the laboratory scale and presumably later on the plant scale. The oxygen carrier on which the research at Utah is focused is CuO/Cu{sub 2}O rather than nickel oxide because the copper system lends itself to use with solid fuels in an alternative to CLC called 'chemical looping with oxygen uncoupling' (CLOU).

Edward Eyring; Gabor Konya

2009-03-31T23:59:59.000Z

262

Co-combustion feasibility study. Final report  

SciTech Connect (OSTI)

This report investigates the technical and economic feasibility of co-combusting municipal sewage sludge produced by the Saratoga County Sewer District No. 1 with paper mill sludge produced by the Cottrell Paper Company, Encore Paper Company, International Paper Company, Mohawk Paper Mills, and TAGSONS Papers at the Saratoga County Sewer District No. 1`s secondary wastewater treatment plant and recovering any available energy products. The co-combustion facility would consist of sludge and wood chip storage and conveying systems, belt filter presses, screw presses, fluidized-bed incinerators, venturi scrubbers and tray cooling systems, ash dewatering facilities, heat recovery steam generators, gas-fired steam superheaters, and a back-pressure steam turbine system. Clean waste wood chips would be used as an auxiliary fuel in the fluidized-bed incinerators. It is recommended that the ash produced by the proposed facility be beneficially used, potentially as a raw material in the manufacture of cement and/or as an interim barrier layer in landfills.

Handcock, D.J. [Clough, Harbour and Associates, Albany, NY (United States)

1995-01-01T23:59:59.000Z

263

Particulate emissions from combustion of biomass in conventional combustion (air) and oxy-combustion conditions.  

E-Print Network [OSTI]

??Oxy-fuel combustion is a viable technology for new and existing coal-fired power plants, as it facilitates carbon capture and thereby, can reduce carbon dioxide emissions.… (more)

Ruscio, Amanda

2013-01-01T23:59:59.000Z

264

Advanced High Efficiency Clean Diesel Combustion with Low Cost...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Efficiency Clean Diesel Combustion with Low Cost for Hybrid Engines Advanced High Efficiency Clean Diesel Combustion with Low Cost for Hybrid Engines Clean, in-cylinder combustion...

265

Low-Temperature Automotive Diesel Combustion | Department of...  

Office of Environmental Management (EM)

in Low Temperature Automotive Diesel Combustion Systems Mixture Formation in a Light-Duty Diesel Engine Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments...

266

Oxy-Combustion CO2 Control | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Combustion Oxy-Combustion Chemical Looping Combustion Program Plan Project Portfolio Project Information POSTED January 27, 2015 - Funding Opportunity Announcement DE-FOA-...

267

PARAMETRIC STUDY OF SUBMICRON PARTICULATES FROM PULVERIZED COAL COMBUSTION  

E-Print Network [OSTI]

D. , Trace Element Chemistry of Coal during Combustion andthe Emissions from Coal-Fired Plants. Prog. Energy Combust.Combustion of Pulverized Coal, Lawrence Berkeley Laboratory

Pennucci, J.

2014-01-01T23:59:59.000Z

268

Fuel Effects on Mixing-Controlled Combustion Strategies for High...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Effects on Mixing-Controlled Combustion Strategies for High-Efficiency Clean-Combustion Engines Fuel Effects on Mixing-Controlled Combustion Strategies for High-Efficiency...

269

Petra Nova Project Breaks Ground on World’s Largest Post-Combustion Carbon Capture Project  

Broader source: Energy.gov [DOE]

The Houston-area Petra Nova project is designed to capture 1.4 million tons of CO2 per year -- making it the world's largest post-combustion carbon capture facility.

270

The Influence of Particle Size and Crystalline Level on the Combustion Characteristics of Particulated Solids  

E-Print Network [OSTI]

Over the past years, catastrophic dust explosion incidents have caused numerous injuries, fatalities and economical losses. Dust explosions are rapid exothermic reactions that take place when a combustible dust is mixed with air in the presence...

Castellanos Duarte, Diana Yazmin

2013-07-29T23:59:59.000Z

271

Deposit Formation during the Co-Combustion of Coal-Biomass Blends  

Science Journals Connector (OSTI)

During recent years, there has been extensive research as well as demonstrations concerning combustion of biomass as a single fuel or combined with ... project it was shown that the utilisation of biomass may lea...

K. R. G. Hein; T. Heinzel; A. Kicherer…

1996-01-01T23:59:59.000Z

272

Pressurised Combustion of Biomass-Derived, Low Calorific Value, Fuel Gas  

Science Journals Connector (OSTI)

During a 3 year (1996 – 1998) project, partly funded by the EU as part of their JOULE 3 programme, experimental and theoretical research will be done on the pressurised combustion of biomass-derived, LCV, fuel ga...

J. Andries; P. D. J. Hoppesteyn…

1997-01-01T23:59:59.000Z

273

Turbulent Combustion in SDF Explosions  

SciTech Connect (OSTI)

A heterogeneous continuum model is proposed to describe the dispersion and combustion of an aluminum particle cloud in an explosion. It combines the gas-dynamic conservation laws for the gas phase with a continuum model for the dispersed phase, as formulated by Nigmatulin. Inter-phase mass, momentum and energy exchange are prescribed by phenomenological models. It incorporates a combustion model based on the mass conservation laws for fuel, air and products; source/sink terms are treated in the fast-chemistry limit appropriate for such gasdynamic fields, along with a model for mass transfer from the particle phase to the gas. The model takes into account both the afterburning of the detonation products of the C-4 booster with air, and the combustion of the Al particles with air. The model equations were integrated by high-order Godunov schemes for both the gas and particle phases. Numerical simulations of the explosion fields from 1.5-g Shock-Dispersed-Fuel (SDF) charge in a 6.6 liter calorimeter were used to validate the combustion model. Then the model was applied to 10-kg Al-SDF explosions in a an unconfined height-of-burst explosion. Computed pressure histories are compared with measured waveforms. Differences are caused by physical-chemical kinetic effects of particle combustion which induce ignition delays in the initial reactive blast wave and quenching of reactions at late times. Current simulations give initial insights into such modeling issues.

Kuhl, A L; Bell, J B; Beckner, V E

2009-11-12T23:59:59.000Z

274

HCCI Combustion: Analysis and Experiments  

SciTech Connect (OSTI)

Homogeneous charge compression ignition (HCCI) is a new combustion technology that may develop as an alternative to diesel engines with high efficiency and low NOx and particulate matter emissions. This paper describes the HCCI research activities being currently pursued at Lawrence Livermore National Laboratory and at the University of California Berkeley. Current activities include analysis as well as experimental work. On analysis, we have developed two powerful tools: a single zone model and a multi-zone model. The single zone model has proven very successful in predicting start of combustion and providing reasonable estimates for peak cylinder pressure, indicated efficiency and NOX emissions. This model is being applied to develop detailed engine performance maps and control strategies, and to analyze the problem of engine startability. The multi-zone model is capable of very accurate predictions of the combustion process, including HC and CO emissions. The multi-zone model h as applicability to the optimization of combustion chamber geometry and operating conditions to achieve controlled combustion at high efficiency and low emissions. On experimental work, we have done a thorough evaluation of operating conditions in a 4-cylinder Volkswagen TDI engine. The engine has been operated over a wide range of conditions by adjusting the intake temperature and the fuel flow rate. Satisfactory operation has been obtained over a wide range of operating conditions. Cylinder-to-cylinder variations play an important role in limiting maximum power, and should be controlled to achieve satisfactory performance.

Salvador M. Aceves; Daniel L. Flowers; Joel Martinez-Frias; J. Ray Smith; Robert Dibble; Michael Au; James Girard

2001-05-14T23:59:59.000Z

275

Major research topics in combustion  

SciTech Connect (OSTI)

The Institute for Computer Applications in Science and Engineering (ICASE) and NASA Langley Research Center (LaRC) hosted a workshop on October 2--4, 1989 to discuss some combustion problems of technological interest to LaRC and to foster interaction with the academic community in these research areas. The topics chosen for this purpose were flame structure, flame holding/extinction, chemical kinetics, turbulence-kinetics interaction, transition to detonation, and reacting free shear layers. This document contains the papers and edited versions of general discussions on these topics. The lead paper set the stage for the meeting by discussing the status and issues of supersonic combustion relevant to the scramjet engine. Experts were then called upon to review the current knowledge in the aforementioned areas, to focus on how this knowledge can be extended and applied to high-speed combustion, and to suggest future directions of research in these areas.

Hussaini, M.Y.; Kumar, A.; Voigt, R.G. (eds.)

1992-01-01T23:59:59.000Z

276

Natural Ores as Oxygen Carriers in Chemical Looping Combustion  

Science Journals Connector (OSTI)

Natural Ores as Oxygen Carriers in Chemical Looping Combustion ... Chemical looping combustion (CLC) is a combustion technology that utilizes oxygen from oxygen carriers (OC), such as metal oxides, instead of air to combust fuels. ...

Hanjing Tian; Ranjani Siriwardane; Thomas Simonyi; James Poston

2013-01-02T23:59:59.000Z

277

Combustion heater for oil shale  

DOE Patents [OSTI]

A combustion heater for oil shale heats particles of spent oil shale containing unburned char by burning the char. A delayed fall is produced by flowing the shale particles down through a stack of downwardly sloped overlapping baffles alternately extending from opposite sides of a vertical column. The delayed fall and flow reversal occurring in passing from each baffle to the next increase the residence time and increase the contact of the oil shale particles with combustion supporting gas flowed across the column to heat the shale to about 650 to 700/sup 0/C for use as a process heat source.

Mallon, R.; Walton, O.; Lewis, A.E.; Braun, R.

1983-09-21T23:59:59.000Z

278

Combustion heater for oil shale  

DOE Patents [OSTI]

A combustion heater for oil shale heats particles of spent oil shale containing unburned char by burning the char. A delayed fall is produced by flowing the shale particles down through a stack of downwardly sloped overlapping baffles alternately extending from opposite sides of a vertical column. The delayed fall and flow reversal occurring in passing from each baffle to the next increase the residence time and increase the contact of the oil shale particles with combustion supporting gas flowed across the column to heat the shale to about 650.degree.-700.degree. C. for use as a process heat source.

Mallon, Richard G. (Livermore, CA); Walton, Otis R. (Livermore, CA); Lewis, Arthur E. (Los Altos, CA); Braun, Robert L. (Livermore, CA)

1985-01-01T23:59:59.000Z

279

Chemical kinetics and combustion modeling  

SciTech Connect (OSTI)

The goal of this program is to gain qualitative insight into how pollutants are formed in combustion systems and to develop quantitative mathematical models to predict their formation rates. The approach is an integrated one, combining low-pressure flame experiments, chemical kinetics modeling, theory, and kinetics experiments to gain as clear a picture as possible of the process in question. These efforts are focused on problems involved with the nitrogen chemistry of combustion systems and on the formation of soot and PAH in flames.

Miller, J.A. [Sandia National Laboratories, Livermore, CA (United States)

1993-12-01T23:59:59.000Z

280

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J.B.; Kelly, M.

1993-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J. Birch (San Jose, CA); Kelly, Michael (West Alexandria, OH)

1993-01-01T23:59:59.000Z

282

Engine Combustion Network Experimental Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Maintained by the Engine Combustion Department of Sandia National Laboratories, data currently available on the website includes reacting and non-reacting sprays in a constant-volume chamber at conditions typical of diesel combustion. The data are useful for model development and validation because of the well-defined boundary conditions and the wide range of conditions employed. A search utility displays data based on experimental conditions such as ambient temperature, ambient density, injection pressure, nozzle size, fuel, etc. Experiment-related visualizations are also available. The search utility for experimental data is located at http://public.ca.sandia.gov/ecn/cvdata/frameset.html (Specialized Interface)

283

Transonic Combustion Inc | Open Energy Information  

Open Energy Info (EERE)

Transonic Combustion Inc Transonic Combustion Inc Jump to: navigation, search Name Transonic Combustion, Inc. Place Camarillo, California Zip CA 93012 Sector Efficiency, Renewable Energy Product Transonic Combustion, Inc. is a US based research & development company focused on developing ultra-high efficiency automotive engines that run on gasoline and bio-renewable flex fuels. References Transonic Combustion, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Transonic Combustion, Inc. is a company located in Camarillo, California . References ↑ "Transonic Combustion, Inc." Retrieved from "http://en.openei.org/w/index.php?title=Transonic_Combustion_Inc&oldid=352376

284

Biomass Combustion: Carbon Capture and Storage  

Science Journals Connector (OSTI)

This chapter deals with the capture and storage of carbon dioxide produced by the combustion of biomass. Since biomass combustion is potentially carbon neutral, this technique could provide a method of reducing t...

Jenny M. Jones; Amanda R. Lea-Langton…

2014-01-01T23:59:59.000Z

285

Coal Characterization in Relation to Coal Combustion  

Science Journals Connector (OSTI)

Most coals are used worldwide for combustion today. Generally all kinds of coals are applicable for combustion. The major methods of burning are fixed bed firing, fluidized bed firing and suspension firing. Th...

Harald Jüntgen

1987-01-01T23:59:59.000Z

286

Practical Use of Coal Combustion Research  

Science Journals Connector (OSTI)

Laboratory measurements of coal rapid pyrolysis char yield and char reactivity, together with a simple model of pulverized coal combustion, have been used to predict coal combustion efficiency in utility boile...

P. T. Roberts; C. Morley

1987-01-01T23:59:59.000Z

287

Emissions and Heat Transfer in Combustion Systems  

Science Journals Connector (OSTI)

A variety of combustion systems that employ turbulent diffusion combustion have been major sources of air pollutants such as NOx, particulates and hydrocarbons in spite of their high thermal efficiency compare...

Y. Daisho

1993-01-01T23:59:59.000Z

288

Simulation of lean premixed turbulent combustion  

E-Print Network [OSTI]

combustion systems that can burn fuels such as hydrogen or syngas.syngas, which is obtained from coal gasi?cation. E?ective utilization of these fuels requires combustion

2008-01-01T23:59:59.000Z

289

Combustion of Solid Biomass: Classification of Fuels  

Science Journals Connector (OSTI)

The combustion of solid biomass and the classification of these fuels are considered. Firstly the different methods of combustion appliances and plants are outlined from a ... view. The forms and types of solid biomass

Jenny M. Jones; Amanda R. Lea-Langton…

2014-01-01T23:59:59.000Z

290

Volatile Organic Compounds — Emissions from Biomass Combustion  

Science Journals Connector (OSTI)

The emissions of Volatile Organic Compounds (VOC) from biomass combustion have been investigated. VOC contribute both to ... 0.5–10 MW. A variety of biomass fuel types and combustion equipment was covered. The su...

Lennart Gustavsson; Mats-Lennart Karlsson

1993-01-01T23:59:59.000Z

291

Fuel Modification t Facilitate Future Combustion Regimes? | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Modification t Facilitate Future Combustion Regimes? Fuel Modification t Facilitate Future Combustion Regimes? 2005 Diesel Engine Emissions Reduction (DEER) Conference...

292

Modeling of HCCI and PCCI Combustion Processes  

Broader source: Energy.gov (indexed) [DOE]

combustion timing control - Startup - Fuel air ratio measurement and control - Low Power Density - Hydrocarbon and CO emissions Approach: Fundamental and...

293

Oxy-combustion Boiler Material Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oxy-combustion Boiler Material Oxy-combustion Boiler Material Development Background In an oxy-combustion system, combustion air (79 percent nitrogen, 21 percent oxygen) is replaced by oxygen and recycled flue gas (carbon dioxide [CO 2 ] and water), eliminating nitrogen in the flue gas stream. When applied to an existing boiler, the flue gas recirculation rate is adjusted to enable the boiler to maintain its original air-fired heat absorption performance, eliminating the need to derate the boiler

294

Combustion characterization of beneficiated coal-based fuels  

SciTech Connect (OSTI)

This three-year research project at Combustion Engineering, Inc. (CE) will assess the potential economic and environmental benefits derived from coal beneficiation by various advanced cleaning processes. The objectives of this program include the development of a detailed generic engineering database, comprised of fuel combustion and ash performance data on beneficiated coal-based fuels (BCFs), which is needed to permit broad application. This technical database will provide detailed information on fundamental fuel properties influencing combustion and mineral matter behavior as well as quantitative performance data on combustion, ash deposition, ash erosion, particulate collection, and gaseous and particulate emissions. Program objectives also address the application of this technical database to predict performance impacts associated with firing BCFs in various commercial boiler designs as well as assessment of the economic implications of BCF utilization. Additionally, demonstration of this technology, with respect to large-scale fuel preparation, firing equipment operation, fuel performance, environmental impacts, and verification of prediction methodology, will be provided during field testing. Twenty fuels will be characterized during the three-year base program: three feed coals, fifteen BCFs, and two conventionally cleaned coals for the field test. Approximately nine BCFs will be in dry ultra fine coal (DUC) form, and six BCFs will be in coal-water fuel (CWF) form. Up to 25 additional BCFs would be characterized during optional project supplements. 9 figs., 1 tab.

Not Available

1989-12-01T23:59:59.000Z

295

OXYGEN ENHANCED COMBUSTION FOR NOx CONTROL  

SciTech Connect (OSTI)

This quarterly technical progress report will summarize work accomplished for the Program through the twelfth quarter, January-March 2003, in the following task areas: Task 1--Oxygen Enhanced Combustion, Task 2--Oxygen Transport Membranes, Task 3--Economic Evaluation and Task 4--Program Management. The program is proceeding in accordance with the objectives for the third year. Pilot scale experiments conducted at the University of Utah explored both the effectiveness of oxygen addition and the best way to add oxygen with a scaled version of Riley Power's newest low NOx burner design. CFD modeling was done to compare the REI's modeling results for James River Unit 3 with the NOx and LOI results obtained during the demonstration program at that facility. Investigation of an alternative method of fabrication of PSO1d elements was conducted. OTM process development work has concluded with the completion of a long-term test of a PSO1d element Economic evaluation has confirmed the advantage of oxygen-enhanced combustion. Proposals have been submitted for two additional beta test sites. Commercial proposals have been submitted. Economic analysis of a beta site test performance was conducted.

David R. Thompson; Lawrence E. Bool; Jack C. Chen

2003-04-01T23:59:59.000Z

296

Fluid-bed combustion of solid wastes  

SciTech Connect (OSTI)

For over ten years combustion Power Company has been conducting experimental programs and developing fluid bed systems for agencies of the federal government and for private industry and institutions. Many of these activities have involved systems for the combustion of solid waste materials. Discussed here will be three categories of programs, development of Municipal Solid Waste (MSW) fired fluid beds, development of wood waste fired fluid beds, and industrial installations. Research and development work on wood wastes has led to the design and construction of two large industrial fluid bed combustors. In one of these, a fluid bed is used for the generation of steam with a fuel that was previously suited only for landfill. Rocks and inerts are continuously removed from this combustor using a patented system. The second FBC is designed to use a variety of fuels as the source of energy to dry hog fuel for use in a high performance power boiler. Here the FBC burns green hog fuel, log yard debris, fly ash (char) from the boiler, and dried wood fines to produce a hot gas system for the wood dryer. A significant advantage of the fluidized bed reactor over conventional incinerators is its ability to reduce noxious gas emission and, finally, the fluidized bed is unique in its ability to efficiently consume low quality fuels. The relatively high inerts and moisture content of solid wastes pose no serious problem and require no associated additional devices for their removal.

Vander Molen, R.H.

1980-01-01T23:59:59.000Z

297

Thrombin Injection Failure with Subsequent Successful Stent-Graft Placement for the Treatment of an Extracranial Internal Carotid Pseudoaneurysm in a 5-Year-Old Child  

SciTech Connect (OSTI)

Internal carotid artery pseudoaneurysm is a rare life-threatening condition that may develop in different clinical situations. We report the case of an extracranial internal carotid artery pseudoaneurysm secondary to a throat infection in a pediatric patient that was initially treated with percutaneous thrombin injection under ultrasound guidance. However, recanalization occurred at 48 h, and definitive treatment was then performed by endovascular stent-graft placement. We briefly review the clinical characteristics of this uncommon clinical condition as well as the treatment options.

Garcia-Monaco, R. D.; Kohan, A. A., E-mail: andreskohan1@gmail.com [Hospital Italiano de Buenos Aires, Department of Radiology (Argentina); Martinez-Corvalan, M. P. [Hospital Italiano de Buenos Aires, Department of ENT (Argentina); Cacchiarelli, N. [Hospital Italiano de Buenos Aires, Department of Pediatrics (Argentina); Peralta, O. [Hospital Italiano de Buenos Aires, Department of Radiology (Argentina); Wahren, C. G. [Hospital Italiano de Buenos Aires, Department of Pediatrics (Argentina)

2012-06-15T23:59:59.000Z

298

Polymer combustion: effects of flame emissivity  

Science Journals Connector (OSTI)

...gas phase. Polymer combustion chemistry is modelled...investigating polymer combustion it has proven advantageous...properties and treat the heat flux from the ignition...luminous flames from hydrocarbon fuels, it is common...A (1999) Polymer combustion: effects of flame emissivity...

1999-01-01T23:59:59.000Z

299

Fundamental Study of Single Biomass Particle Combustion  

E-Print Network [OSTI]

Fundamental Study of Single Biomass Particle Combustion Maryam Momeni #12;Fundamental Study of Single Biomass Particle Combustion Maryam Momeni Dissertation submitted to the Faculty of Engineering Fundamental Study of Single Biomass Particle Combustion This thesis is a comprehensive study of single biomass

Berning, Torsten

300

NETL: 2009 Conference Proceedings - Pre-combustion CO2 Capture Kick-off  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Pre-combustion CO2 Capture Kick-off Meetings Pre-combustion CO2 Capture Kick-off Meetings Pittsburgh, PA November 12-13, 2009 Table of Contents Disclaimer Presentations PRESENTATIONS Welcome/Sequestration Program Overview [PDF-842KB] Sean Plasynski, Sequestration Technology Manager Hydrogen Selective Ex-foliated Zeolite Membranes [PDF-3.4MB] University Of Minnesota Designing and Validating Ternary Pd Alloys for Optimum Sulfur/Carbon Resistance in Hydrogen Separation and Carbon Capture Membrane Systems Using High-Throughput Combinatorial Methods [PDF-746KB] Pall Corporation Pre-Combustion Carbon Dioxide Capture by a New Dual-Phase Ceramic-Carbonate Membrane Reactor [PDF-1.7MB] Arizona State University CO2 Capture from IGCC Gas Streams Using the AC-ABC Process [PDF-842KB] SRI International A Low-Cost, High-Efficiency Regenerable Sorbent for Pre-Combustion CO2 Capture [PDF-1.2MB]

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

NETL: IEP – Oxy-Combustion CO2 Emissions Control - CANMET CO2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

– Oxy-Combustion CO2 Emissions Control – Oxy-Combustion CO2 Emissions Control CANMET CO2 Consortium-O2/CO2 Recycle Combustion Project No.: IEA-CANMET-CO2 (International Agreement) Photograph of CANMET's Vertical Combustor Research Facility. Photograph of CANMET’s Vertical Combustor Research Facility. The CANMET carbon dioxide (CO2) consortium will conduct research to further the development of oxy-combustion for retrofit to coal-fired power plants. Research activities include: (1) modeling of an advanced, supercritical pressure oxy-coal plant, including an analysis of the impact of oxygen (O2) purity and O2 partial enrichment, overall process performance, and cost; (2) testing of pilot-scale CO2 capture and compression; (3) investigating CO2 phase change at liquid and supercritical states in gas mixtures

302

Analysis of the Start of Combustion of a Diesel Fuel in a HCCI Process through an Integral Chemical Kinetic Model and Experimentation  

Science Journals Connector (OSTI)

The high dependence of the ignition with the temperature evolution in the combustion chamber shows that many simulation models integrate the temperature distribution as a fundamental feature. ... In compression-ignition (CI) or diesel cycle engines, the premixed burn phase, which occurs shortly after injection, dets. ... Heywood, J. B. Internal Combustion Engine Fundamentals; McGraw-Hill Book Company: Singapore, 1998. ...

Miguel Torres Garcia; Ricardo Chacartegui Ramirez; Francisco Jimenez-Espadafor Aguilar; Tomas Sanchez Lencero

2008-01-23T23:59:59.000Z

303

International petroleum statistics report  

SciTech Connect (OSTI)

This report provides information on current international petroleum production, demand, imports, and stocks. World oil demand and OECD demand data are presented for the years 1970 thru 1995.

NONE

1996-08-01T23:59:59.000Z

304

Guidelines for Modeling Based on Experiences with Radiantly Stabilized Combustion  

Science Journals Connector (OSTI)

The experimental measurements were confined to the central channel, and the other six were considered to be “guard heaters” to minimize radial heat losses. ... “Flameless incandescent surface combustion” was, according to Bone and Townend,8 actually identified by that name by Bone and M'Court, who, in the period of 1906?1909, observed for the combustion of a mixture of a gaseous fuel and air in various types of porous media “an intensely glowing surface ? a veritable wall of fire, but without a flame ? throwing out a genial radiant heat, .... the surface temperature being about 900° to 1000 °C”. ... They also produced one great surprise, namely that the internal heat transfer coefficient corresponding to the uniform heating varied radically with length for some conditions, including the attainment of unbounded and negative values. ...

Stuart W. Churchill

2008-03-29T23:59:59.000Z

305

Modeling of Laser-Induced Metal Combustion  

SciTech Connect (OSTI)

Experiments involving the interaction of a high-power laser beam with metal targets demonstrate that combustion plays an important role. This process depends on reactions within an oxide layer, together with oxygenation and removal of this layer by the wind. We present an analytical model of laser-induced combustion. The model predicts the threshold for initiation of combustion, the growth of the combustion layer with time, and the threshold for self-supported combustion. Solutions are compared with detailed numerical modeling as benchmarked by laboratory experiments.

Boley, C D; Rubenchik, A M

2008-02-20T23:59:59.000Z

306

Enhanced Combustion Low NOx Pulverized Coal Burner  

SciTech Connect (OSTI)

For more than two decades, Alstom Power Inc. (Alstom) has developed a range of low cost, infurnace technologies for NOx emissions control for the domestic U.S. pulverized coal fired boiler market. This includes Alstom's internally developed TFS 2000{trademark} firing system, and various enhancements to it developed in concert with the U.S. Department of Energy. As of the date of this report, more than 270 units representing approximately 80,000 MWe of domestic coal fired capacity have been retrofit with Alstom low NOx technology. Best of class emissions range from 0.18 lb/MMBtu for bituminous coal to 0.10 lb/MMBtu for subbituminous coal, with typical levels at 0.24 lb/MMBtu and 0.13 lb/MMBtu, respectively. Despite these gains, NOx emissions limits in the U.S. continue to ratchet down for new and existing boiler equipment. On March 10, 2005, the Environmental Protection Agency (EPA) announced the Clean Air Interstate Rule (CAIR). CAIR requires 25 Eastern states to reduce NOx emissions from the power generation sector by 1.7 million tons in 2009 and 2.0 million tons by 2015. Low cost solutions to meet such regulations, and in particular those that can avoid the need for a costly selective catalytic reduction system (SCR), provide a strong incentive to continue to improve low NOx firing system technology to meet current and anticipated NOx control regulations. The overall objective of the work is to develop an enhanced combustion, low NOx pulverized coal burner, which, when integrated with Alstom's state-of-the-art, globally air staged low NOx firing systems will provide a means to achieve: Less than 0.15 lb/MMBtu NOx emissions when firing a high volatile Eastern or Western bituminous coal, Less than 0.10 lb/MMBtu NOx emissions when firing a subbituminous coal, NOx reduction costs at least 25% lower than the costs of an SCR, Validation of the NOx control technology developed through large (15 MWt) pilot scale demonstration, and Documentation required for economic evaluation and commercial application. During the project performance period, Alstom performed computational fluid dynamics (CFD) modeling and large pilot scale combustion testing in its Industrial Scale Burner Facility (ISBF) at its U.S. Power Plant Laboratories facility in Windsor, Connecticut in support of these objectives. The NOx reduction approach was to optimize near-field combustion to ensure that minimum NOx emissions are achieved with minimal impact on unburned carbon in ash, slagging and fouling, corrosion, and flame stability/turn-down. Several iterations of CFD and combustion testing on a Midwest coal led to an optimized design, which was extensively combustion tested on a range of coals. The data from these tests were then used to validate system costs and benefits versus SCR. Three coals were evaluated during the bench-scale and large pilot-scale testing tasks. The three coals ranged from a very reactive subbituminous coal to a moderately reactive Western bituminous coal to a much less reactive Midwest bituminous coal. Bench-scale testing was comprised of standard ASTM properties evaluation, plus more detailed characterization of fuel properties through drop tube furnace testing and thermogravimetric analysis. Bench-scale characterization of the three test coals showed that both NOx emissions and combustion performance are a strong function of coal properties. The more reactive coals evolved more of their fuel bound nitrogen in the substoichiometric main burner zone than less reactive coal, resulting in the potential for lower NOx emissions. From a combustion point of view, the more reactive coals also showed lower carbon in ash and CO values than the less reactive coal at any given main burner zone stoichiometry. According to bench-scale results, the subbituminous coal was found to be the most amenable to both low NOx, and acceptably low combustibles in the flue gas, in an air staged low NOx system. The Midwest bituminous coal, by contrast, was predicted to be the most challenging of the three coals, with the Western bituminous coal predicted to beh

David Towle; Richard Donais; Todd Hellewell; Robert Lewis; Robert Schrecengost

2007-06-30T23:59:59.000Z

307

Measurement and simulation of swirling coal combustion  

Science Journals Connector (OSTI)

Particle image velocimetry (PIV), thermocouples and flue gas analyzer are used to study swirling coal combustion and NO formation under different secondary-air ratios. Eulerian–Lagrangian large-eddy simulation (LES) using the Smagorinsky–Lilly sub-grid scale stress model, presumed-PDF fast chemistry and eddy-break-up (EBU) gas combustion models, particle devolatilization and particle combustion models, are simultaneously used to simulate swirling coal combustion. Statistical LES results are validated by measurement results. Instantaneous LES results show that the coherent structures for swirling coal combustion are stronger than those for swirling gas combustion. Particles are shown to concentrate along the periphery of the coherent structures. Combustion flame is located in the high vorticity and high particle concentration zones. Measurement shows that secondary-air ratios have little effect on final NO formation at the exit of the combustor.

Liyuan Hu; Lixing Zhou; Yonghao Luo; Caisong Xu

2013-01-01T23:59:59.000Z

308

Combustion characterization of beneficiated coal-based fuels  

SciTech Connect (OSTI)

This three-year research project at Combustion Engineering, Inc. (CE), will assess the potential economic and environmental benefits derived from coal beneficiation by various advanced cleaning processes. The objectives of this program include the development of a detailed generic engineering data base, comprised of fuel combustion and ash performance data on beneficiated coal-based fuels (BCFs), which is needed to permit broad application. This technical data base will provide detailed information on fundamental fuel properties influencing combustion and mineral matter behavior as well as quantitative performance data on combustion, ash deposition, ash erosion, particulate collection, and gaseous and particulate emissions. Program objectives also address the application of this technical data base to predict performance impacts associated with firing BCFs in various commercial boiler designs as well as assessment of the economic implications of BCF utilization. Additionally, demonstration of this technology, with respect to large-scale fuel preparation, firing equipment operation, fuel performance, environmental impacts, and verification of prediction methodology, will be provided during field testing.

Not Available

1990-03-01T23:59:59.000Z

309

Combustion synthesis continuous flow reactor  

DOE Patents [OSTI]

The present invention is a reactor for combustion synthesis of inorganic powders. The reactor includes a reaction vessel having a length and a first end and a second end. The reaction vessel further has a solution inlet and a carrier gas inlet. The reactor further has a heater for heating both the solution and the carrier gas. In a preferred embodiment, the reaction vessel is heated and the solution is in contact with the heated reaction vessel. It is further preferred that the reaction vessel be cylindrical and that the carrier gas is introduced tangentially into the reaction vessel so that the solution flows helically along the interior wall of the reaction vessel. As the solution evaporates and combustion produces inorganic material powder, the carrier gas entrains the powder and carries it out of the reactor.

Maupin, Gary D. (Richland, WA); Chick, Lawrence A. (West Richland, WA); Kurosky, Randal P. (Maple Valley, WA)

1998-01-01T23:59:59.000Z

310

EIA - International Energy Outlook 2010  

Gasoline and Diesel Fuel Update (EIA)

Emissions Emissions International Energy Outlook 2010 Graphic Data - Emissions Figure 103. World energy-related carbon dioxide emissions, 2007-2035 Figure 104. World energy-related carbon dioxide emissions by fuel type, 1990-2035 Figure 105. U.S.energy-related carbon dioxide emissions by fuel in IEO2009 and IEO2010, 2007, 2015, and 2035 Figure 106. Average annual growth in energy-related carbon dioxide emissions in OECD economies, 2007-2035 Figure 107. Average annual growth in energy-related carbon dioxide emissions in the Non-OECD economies, 2007-2035 Figure 108. World carbon dioxide emissions from liquids combustion, 1990-2035 Figure 109. World carbon dioxide emissions from natural gas combustion, 1990-2035 Figure 110. World carbon dioxide emissions from coal combustion, 1990-2035

311

Homogeneous catalysts in hypersonic combustion  

SciTech Connect (OSTI)

Density and residence time both become unfavorably small for efficient combustion of hydrogen fuel in ramjet propulsion in air at high altitude and hypersonic speed. Raising the density and increasing the transit time of the air through the engine necessitates stronger contraction of the air flow area. This enhances the kinetic and thermodynamic tendency of H/sub 2/O to form completely, accompanied only by N/sub 2/ and any excess H/sub 2/(or O/sub 2/). The by-products to be avoided are the energetically expensive fragment species H and/or O atoms and OH radicals, and residual (2H/sub 2/ plus O/sub 2/). However, excessive area contraction raises air temperature and consequent combustion-product temperature by adiabatic compression. This counteracts and ultimately overwhelms the thermodynamic benefit by which higher density favors the triatomic product, H/sub 2/O, over its monatomic and diatomic alternatives. For static pressures in the neighborhood of 1 atm, static temperature must be kept or brought below ca. 2400 K for acceptable stability of H/sub 2/O. Another measure, whose requisite chemistry we address here, is to extract propulsive work from the combustion products early in the expansion. The objective is to lower the static temperature of the combustion stream enough for H/sub 2/O to become adequately stable before the exhaust flow is massively expanded and its composition ''frozen.'' We proceed to address this mechanism and its kinetics, and then examine prospects for enhancing its rate by homogeneous catalysts. 9 refs.

Harradine, D.M.; Lyman, J.L.; Oldenborg, R.C.; Pack, R.T.; Schott, G.L.

1989-01-01T23:59:59.000Z

312

NETL: Combustion Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Detailed Description of APFBC Repowering Detailed Description of APFBC Repowering FBC Repower Simple Description Detailed Description APFBC Specs GTs for APFBC Click on picture to enlarge Repowering Existing Power Plants with Advanced Pressurized Fluidized-Bed Combined Cycles Contents: Please send me to the NON-TECHNICAL DISCUSSION about APFBC instead! Click on the technical discussion areas below, or simply browse down in this page: APFBC Repowering Considerations Process Sketch APFBC Components High Energy Efficiency Excellent Environmental Performance Cost Comparable to a Pulverized Coal Plant APFBC Repowering Considerations Click on picture to enlarge Process Sketch While all elements of the APFBC plant have been tested, APFBC technology is still under development. Test programs are in place that will soon show commercial operations for all parts. The most important of these are the DOE Power Systems Development Facility in Wilsonville, Alabama, and two DOE Clean Coal Technology projects: Piñon Pines, testing ceramic filters, and the APFBC CCT project. DOE views the following as the development status of the various elements for application in a year 2002 repowering plant installation:

313

Characteristics of biomass in flameless combustion: A review  

Science Journals Connector (OSTI)

Abstract The demands of energy and pollutant emissions reduction have motivated the combustion researchers to work on combustion improvement. Flameless combustion or high temperature air combustion has many features such as flame stability, low pollutant emission and uniform profiles of temperature compared to the other modes of combustion. Combustion of solid fuels likes biomass and wastes in flameless combustion conditions has not been investigated as comprehensive as combustion of gaseous fuels. The aim of using biomass in combustion is to reduce the pollutant emissions and to decrease the rate of fossil fuel consumption. In this review, combustion characteristics of biomass in flameless combustion are explained. The paper summarizes the research on the mass loss, ignition time, and \\{NOx\\} emissions during biomass flameless combustion. These summaries show that biomass under flameless combustion gives low pollutant emissions, low mass loss and it decreases the ignition time.

A.A.A. Abuelnuor; M.A. Wahid; Seyed Ehsan Hosseini; A. Saat; Khalid M. Saqr; Hani H. Sait; M. Osman

2014-01-01T23:59:59.000Z

314

NETL: IEP – Post-Combustion CO2 Emissions Control - Characterization and  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Characterization and Prediction of Oxy-Combustion Impacts in Existing Coal-fired Boilers Characterization and Prediction of Oxy-Combustion Impacts in Existing Coal-fired Boilers Project No.: DE-NT0005288 Pilot-scale 100 kW oxy-fuel combustor Pilot-scale 100 kW oxy-fuel combustor Reaction Engineering International will conduct multi-scale experiments, coupled with mechanism development and computational fluid dynamics modeling, to evaluate the impacts of retrofitting existing coal-fired boilers for oxy-combustion. Test data will be obtained from oxy-combustion experiments at the 0.1-kilowatt (kW), 100-kW, and 1.2-megawatt scale. Related Papers and Publications: Characterization of Oxy-combustion Impacts in Existing Coal-fired Boilers [PDF-9MB] (Nov 2013) Final Project Review Meeting, Pittsburgh, PA, November 6, 2013. Characterization of Oxy-Combustion Impacts in Existing Coal-Fired Boilers [PDF-1.67MB] (July 2013)

315

NETL: IEP – Post-Combustion CO2 Emissions Control - Oxy-Combustion Boiler  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Oxy-Combustion Boiler Material Development Oxy-Combustion Boiler Material Development Project No.: DE-NT0005262 CLICK ON IMAGE TO ENLARGE Foster Wheeler Oxy-combustion CFD Graphic The objectives of this Foster Wheeler Corporation-managed program are to assess the corrosion characteristics of oxy-combustion relative to air-fired combustion; identify the corrosion mechanisms involved; and determine the effects of oxy-combustion on conventional boiler tube materials, conventional protective coatings, and alternative materials and coatings when operating with high to low sulfur coals. The program involves the prediction of oxy-combustion gas compositions by computational fluid dynamic calculations, exposure of coupons of boiler materials and coverings coated with coal ash deposit to simulated oxy-combustion gases in electric

316

A fundamental study of biomass oxy-fuel combustion and co-combustion.  

E-Print Network [OSTI]

??While oxy-fuel combustion research is developing and large scale projects are proceeding, little information is available on oxy-biomass combustion and cocombustion with coal. To address… (more)

Farrow, Timipere Salome

2013-01-01T23:59:59.000Z

317

System issues and tradeoffs associated with syngas production and combustion  

SciTech Connect (OSTI)

The purpose of this article is to provide an overview of the basic technology of coal gasification for the production of syngas and the utilization of that syngas in power generation. The common gasifier types, fixed/moving bed, fluidized bed, entrained flow, and transport, are described, and accompanying typical product syngas compositions are shown for different coal ranks. Substantial variation in product gas composition is observed with changes in gasifier and coal feed type. Fuel contaminants such as sulfur, nitrogen, ash, as well as heavy metals such as mercury, arsenic, and selenium, can be removed to protect the environment and downstream processes. A variety of methods for syngas utilization for power production are discussed, including both present (gas turbine and internal combustion engines) and future technologies, including oxy-fuel, chemical looping, fuel cells, and hybrids. Goals to improve system efficiencies, further reduce NOx emissions, and provide options for CO2 sequestration require advancements in many aspects of IGCC plants, including the combustion system. Areas for improvements in combustion technology that could minimize these tradeoffs between cost, complexity, and performance are discussed.

Casleton, K.H.; Richards, G.A.; Breault, R.W.

2008-06-01T23:59:59.000Z

318

System Issues and Tradeoffs Associated with Syngas Production and Combustion  

SciTech Connect (OSTI)

The purpose of this article is to provide an overview of the basic technology of coal gasification for the production of syngas and the utilization of that syngas in power generation. The common gasifier types, fixed=moving bed, fluidized bed, entrained flow, and transport, are described, and accompanying typical product syngas compositions are shown for different coal ranks. Substantial variation in product gas composition is observed with changes in gasifier and coal feed type. Fuel contaminants such as sulfur, nitrogen, ash, as well as heavy metals such as mercury, arsenic, and selenium, can be removed to protect the environment and downstream processes. A variety of methods for syngas utilization for power production are discussed, including both present (gas turbine and internal combustion engines) and future technologies, including oxy-fuel, chemical looping, fuel cells, and hybrids. Goals to improve system efficiencies, further reduce NOx emissions, and provide options for CO2 sequestration require advancements in many aspects of IGCC plants, including the combustion system. Areas for improvements in combustion technology that could minimize these tradeoffs between cost, complexity, and performance are discussed.

Kent H. Casleton; Ronald W. Breault; George A. Richards

2008-06-01T23:59:59.000Z

319

Estimating heat of combustion for waste materials  

SciTech Connect (OSTI)

Describes a method of estimating the heat of combustion of hydrocarbon waste (containing S,N,Q,C1) in various physical forms (vapor, liquid, solid, or mixtures) when the composition of the waste stream is known or can be estimated. Presents an equation for predicting the heat of combustion of hydrocarbons containing some sulfur. Shows how the method is convenient for estimating the heat of combustion of a waste profile as shown in a sample calculation.

Chang, Y.C.

1982-11-01T23:59:59.000Z

320

Supersonic combustion studies using a multivariate quadrature based method for combustion modeling  

E-Print Network [OSTI]

of predictive models for supersonic combustion is a critical step in design and development of scramjet engines

Raman, Venkat

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Researchers create successful predictions of combustion reaction...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

chemical reactions that take place during the combustion process, said Sandia's Ahren Jasper, the study's lead author. As they determine and understand the speeds and outcomes of...

322

combustion index | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in electricity cost. Advanced Combustion Research Overview Experience with steam boilers has provided information on existing boiler alloys, but limited data is available at...

323

Optimization of Advanced Diesel Engine Combustion Strategies  

Broader source: Energy.gov (indexed) [DOE]

B, extending combustion duration Location B with dummy plug installed Location A with optics installed fiber to FTIR common rail injector common rail fuel spray Location B with...

324

Chemical Kinetic Models for Advanced Engine Combustion  

Broader source: Energy.gov (indexed) [DOE]

barriers to increased engine efficiency and decreased emissions by allowing optimization of fuels with advanced engine combustion 6 LLNL-PRES-652979 2014 DOE Merit Review...

325

Oxygen-Enriched Combustion | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

tip sheet discusses how an increase in oxygen in combustion air can reduce the energy loss in the exhaust gases and increase process heating system efficiency. PROCESS HEATING...

326

Vehicle Technologies Office: Advanced Combustion Strategies ...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

element of LTC - is achieved by controlling the timing of the autoignition and rate of heat release. This process works to eliminate excessive combustion rates that can cause...

327

Advanced Combustion Concepts - Enabling Systems and Solutions...  

Broader source: Energy.gov (indexed) [DOE]

Fuel efficiency as key market driver Stringent emission requirements System cost of advanced combustion Targets 30% fuel efficiency improvement SULEV emissions...

328

Laser in situ monitoring of combustion processes  

Science Journals Connector (OSTI)

Several examples of laser in situ monitoring of combustion processes are presented. Using a frequency modulated 13CO2 waveguide laser, in situ concentrations of...

Arnold, A; Becker, H; Hemberger, R; Hentschel, W; Ketterle, W; Kollner, M; Meienburg, W; Monkhouse, P; Neckel, H; Schafer, M; Schindler, K P; Sick, V; Suntz, R; Wolfrum, J

1990-01-01T23:59:59.000Z

329

Supersonic Jet Sampling for Combustion Diagnostics  

Science Journals Connector (OSTI)

The purpose of this note is to describe a novel application of supersonic molecular beam spectrometry to the study of combustion processes in piston engines. In this technique,...

Whitten, W B

1986-01-01T23:59:59.000Z

330

Advanced Control Methodology for Biomass Combustion.  

E-Print Network [OSTI]

??This thesis presents a feasibility study for a low cost sensor-based combustion control system using a predictive chemical kinetic model that captures efficiencies and pollution… (more)

Bjornsson, Stefan

2014-01-01T23:59:59.000Z

331

Partially Premixed Combustion | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

that enables PPC to reach the market deer11andersson.pdf More Documents & Publications Combustion Model for Engine Concept Development Path to High Efficiency Gasoline Engine...

332

Chemistry and Transport - Combustion Energy Frontier Research...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chemistry and Transport Chemistry and Transport The overall goal of the flame chemistry working group is to obtain fundamental combustion and emission properties of low and high...

333

Integrated Nozzle Flow, Spray, Combustion, & Emission Modeling...  

Broader source: Energy.gov (indexed) [DOE]

Combustion, and Emission Modeling Using KH-ACT Primary Breakup Model & Detailed Chemistry Sibendu Som, Douglas E. Longman Engine and Emissions Group (Energy Systems Division)...

334

Chemistry: Mechanism and Experiment - Combustion Energy Frontier...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chemistry: Mechanism and Experiment Chemistry: Mechanism and Experiment The Mechanism and Experiment DWG uses an array of advanced experimental apparatus to probe the combustion...

335

NETL: IEP - Post-Combustion CO2 Emissions Control - Post-Combustion CO2  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Post-Combustion CO2 Capture for Existing PC Boilers by Self-concentrating Amine Absorbent Post-Combustion CO2 Capture for Existing PC Boilers by Self-concentrating Amine Absorbent Project No.: DE-FE0004274 3H Company will evaluate the feasibility of its "Self-Concentrating Absorbent CO2 Capture Process." The process is based on amines in a non-aqueous solvent which, upon reaction with CO2, separate into two distinct phases: a CO2-rich liquid phase and a dilute lean phase. The proposed process offers several potential advantages. Preliminary experimental data show that the process has the potential of reducing the total regeneration energy by as much as 70 percent. The solvent has high working capacity, thus required solvent volume would be lower than that required in a currently available amine system. This results in lower pumping requirements, lower auxiliary power demands, and reduced equipment size. In addition, since the solvent is non-aqueous, corrosion issues would be reduced. During the three-year project, an engineering design supported by laboratory data and economic justification will be developed to construct and operate a slipstream demonstration facility at an E-ON power plant in the United States as a next stage of commercialization development.

336

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

traditional power plant. A clean technology can also reduceOn the other hand, “clean” technology advancements can alsoA third consideration of clean technologies is whether it is

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

337

H2 Internal Combustion Engine Research Towards 45% efficiency...  

Broader source: Energy.gov (indexed) [DOE]

interaction Useable in central and side injector location Basic understanding of jet penetration Tests performed (central injection) Single injection with variation of Start...

338

Plasmatron Fuel Reformer Development and Internal Combustion Engine Vehicle Applications  

Broader source: Energy.gov [DOE]

2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: Massachusetts Institute of Technology

339

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

particulates (soot). Even wind power can have the undesiredsuch as solar and wind power, and offshore technologies willcost of solar and wind power presents a grand opportunity

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

340

Internal combustion engine power. A quarter century in review  

SciTech Connect (OSTI)

The advancements have been momentous. A review of the past quarter century of progress - including engine efficiencies, power ratings, fuels, emissions and the technological advances associated with these parameters - draws the real and outstanding developments of the period into perspective. Though the shapes of engines appear to be the same, few of the easy product classifications that existed in 1969 have survived to this day. In addition, the pattern of engine development is becoming similar throughout the world. All diesel engine design work, regardless of the country in which it is being carried out, is related to increasing specific output, from the smaller high-speed diesel, gas and gas turbine engines to the very largest stationary and marine power engines. This is being accomplished for the reciprocating engine by, basically, the same design and research techniques: higher speed, larger engine displacement through larger cylinder sizes, more cylinders with V-type configurations, and higher mean effective pressures through intensive use of turbo-charging and charge-air cooling, along with cylinder-head and injection process modifications. 6 figs.

Kane, J.

1994-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

fraction of energy converted in the case of solar panels orsolar energy, wind energy, and the earth’s heat through respective advances in nuclear fission, hydroelectric dams, photovoltaic solar panels,

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

342

Particles from internal combustion engines - what we need to know  

Science Journals Connector (OSTI)

...distributions measured behind diesel-powered vehicles are...aerosol emitted from the diesel vehicles contains a prominent...a combination of both diesel and petrol vehicles...legislated standard drive cycles), we will require instruments...public-at-large in general. This needs to be determined...

2000-01-01T23:59:59.000Z

343

Laser ignition in internal-combustion engines: Sparkless initiation  

Science Journals Connector (OSTI)

Laser ignition has been implemented in a single-cylinder ... pressure versus crank angle) were obtained for laser ignition with nano- and microsecond pulses of an Nd:YAG laser. The maximum power of microsecond pu...

A. A. Andronov; V. A. Gurin; A. V. Marugin; A. P. Savikin…

2014-08-01T23:59:59.000Z

344

33rd International Symposium on Combustion Hottel Lecture Application...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Delay Times * Species Time-Histories * Reaction Rate Constants * Methyl Ester Studies * Ignition Delay Times Long-Term Objectives * Generate high-quality fundamental kinetics...

345

Microwave-Assisted Ignition for Improved Internal Combustion Engine Efficiency  

E-Print Network [OSTI]

as solar-charged hydrogen fuel cells were allowed to becomee.g. wind-generated hydrogen fuel cell hybrid vehicle) can

DeFilippo, Anthony Cesar

2013-01-01T23:59:59.000Z

346

Vaporizer design criteria for ethanol fueled internal combustion engines  

E-Print Network [OSTI]

been identified in conversion of diesel engines of farm tractors for using alcohol fuels. Distillation at atmospheric pressure does not yield 200 proof ethanol, (Winston, 1981), so with present technology, ethanol produced on farms is aqueous. A... engines 2. Modify diesel to tolerate straight ethanol injection. 3. Mix ethanol with diesel fuel. 4. Carburete the ethanol separately Converting Diesels To SI Engines Most diesel engines currently used in tractors operate with compression ratios...

Ariyaratne, Arachchi Rallage

2012-06-07T23:59:59.000Z

347

Theoretical studies of nonadiabatic and spin-forbidden processes: Investigations of the reactions and spectroscopy of radical species relevant to combustion reactions and diagnostics  

SciTech Connect (OSTI)

This research program focusses on studies of spin-forbidden and electronically nonadiabatic processes involving radical species relevant to combustion reactions and combustion diagnostics. To study the electronic structure aspects of these processes a unique and powerful system of electronic structure programs, developed over the past nine years, the BROOKLYN codes, is employed. These programs enable the authors to address questions basic to the understanding of elementary combustion processes not tractable using more standard quantum chemistry codes.

Yarkony, D.R. [Johns Hopkins Univ., Baltimore, MD (United States)

1993-12-01T23:59:59.000Z

348

Theoretical studies of combustion dynamics  

SciTech Connect (OSTI)

The basic objectives of this research program are to develop and apply theoretical techniques to fundamental dynamical processes of importance in gas-phase combustion. There are two major areas currently supported by this grant. One is reactive scattering of diatom-diatom systems, and the other is the dynamics of complex formation and decay based on L{sup 2} methods. In all of these studies, the authors focus on systems that are of interest experimentally, and for which potential energy surfaces based, at least in part, on ab initio calculations are available.

Bowman, J.M. [Emory Univ., Atlanta, GA (United States)

1993-12-01T23:59:59.000Z

349

Circulating fluidised-bed combustion  

SciTech Connect (OSTI)

Steam generators with circulating fluidized-bed combustion systems (CFBC) are characterized by a high degree of environmental comparability and a wide acceptance for FBC boiler plants involving a wide fuel spectrum which ranges from dried brown coal to high-ash coal and low-volatile bituminous coal as well as wood waste and bark. These plants incorporate a variety of CFBC systems. The choice in favor of different system options was not motivated by the inherent fuel properties but has evolved from the progressive advancement in power station FBC technology. The article elucidates several FBC system variants.

Rettemeier, W.; von der Kammer, G. (Steinmueller (L.u.C.) GmbH, Gummersbach (Germany, F.R.))

1990-01-01T23:59:59.000Z

350

Chemical looping combustion of coal in interconnected fluidized beds  

Science Journals Connector (OSTI)

Chemical looping combustion is the indirect combustion by use of oxygen carrier. It can...2...capture in power generating processes. In this paper, chemical looping combustion of coal in interconnected fluidized ...

LaiHong Shen; Min Zheng; Jun Xiao; Hui Zhang…

2007-04-01T23:59:59.000Z

351

Fuel reforming for scramjet thermal management and combustion optimization  

E-Print Network [OSTI]

Fuel reforming for scramjet thermal management and combustion optimization E. DANIAU* , M. BOUCHEZ in a Scramjet combustion chamber. Another critical point is that mixing and combustion should be sufficiently

Paris-Sud XI, Université de

352

Assessor Training Internal Audits and  

E-Print Network [OSTI]

NVLAP Assessor Training Internal Audits and Management Reviews #12;Assessor Training 2009, quarterly, etc., schedule throughout the year #12;Assessor Training 2009: Internal Audits and Management a copy of the full internal audit schedule. #12;Assessor Training 2009: Internal Audits and Management

353

LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS  

SciTech Connect (OSTI)

Vision 21 combustion systems will require innovative low emission designs and low development costs if Vision 21 goals are to be realized. In this three-year project, an advanced computational software tool will be developed for the design of low emission combustion systems required for Vision 21 clean energy plants. The combustion Large Eddy Simulation (LES) software will be able to accurately simulate the highly transient nature of gaseous-fueled turbulent combustion so that innovative concepts can be assessed and developed with fewer high-cost experimental tests. During the first year, the project included the development and implementation of improved chemistry (reduced GRI mechanism), subgrid turbulence (localized dynamic), and subgrid combustion-turbulence interaction (Linear Eddy) models into the CFDACE+ code. University expertise (Georgia Tech and UC Berkeley) was utilized to help develop and implement these advanced submodels into the unstructured, parallel CFD flow solver, CFD-ACE+. Efficient numerical algorithms that rely on in situ look-up tables or artificial neural networks were implemented for chemistry calculations. In the second year, the combustion LES software was evaluated and validated using experimental data from lab-scale and industrial test configurations. This code testing (i.e., alpha testing) was performed by CFD Research Corporation's engineers. During the third year, six industrial and academic partners used the combustion LES code and exercised it on problems of their choice (i.e., beta testing). Final feedback and optimizations were then be implemented in the final release version of the combustion LES software that will be licensed to the general public. An additional one-year task was added for the fourth year of this program entitled, ''LES Simulations of SIMVAL Results''. For this task, CFDRC performed LES calculations of selected SIMVAL cases, and compared predictions with measurements. In addition to comparisons with NO{sub x} and CO exit measurements, comparisons were made to measured pressure oscillations. Possible gaps in the data sets were identified, as well as potential areas of improvement for combustion and turbulence models. Work in this seventeenth quarter (October-December 2004) consisted of writing the draft final report for review by DOE. The report was delivered to DOE in January, 2005.

Clifford E. Smith

2005-04-01T23:59:59.000Z

354

The Cool Flame Combustion of Ethanol  

Science Journals Connector (OSTI)

...research-article The Cool Flame Combustion of Ethanol J. Brown C. F. H. Tipper The kinetics...products of the cool flame combustion of ethanol between about 280 and 330 C have been...much less for a 1 : 2 than for a 1 : 1 ethanol/oxygen mixture at constant T and varied...

1969-01-01T23:59:59.000Z

355

Numerical modelling of MILD combustion for coal  

Science Journals Connector (OSTI)

Emissions of nitrogen oxides from coal combustion are a major environmental problem because they have been shown to contribute to the formation of acid rain and photochemical smog. Moderate and Intensive Low oxygen Dilution (MILD) combustion is a promising technology for decreasing pollutant emissions and improving combustion efficiency. A combination of air preheating and fuel dilution with combustion products of low oxygen concentration are the main features of this technique. In the MILD combustion mode, preheated air and fuel are gradually mixed with large amounts of recirculated exhaust gas. The objective of the present work is to investigate the capability of present fuel NO mechanisms for pulverised coal combustion to predict the observed nitrogen oxide levels in MILD combustion mode. For this purpose, knowledge of the fate of coal nitrogen during the combustion process is vital. The interaction between turbulence and chemistry is modelled by an advanced Eddy Dissipation Concept (EDC). The NOx model is used to predict NO profiles that are compared to measurements obtained from semi-industrial scale experiments.

Ju Pyo Kim; U. Schnell; G. Scheffknecht; A.C. Benim

2007-01-01T23:59:59.000Z

356

Redeeming features of in situ combustion  

SciTech Connect (OSTI)

In situ combustion remains the most tantalizing enhanced oil recovery method. It has been tested extensively - in over 150 field tests - in both heavy and light oil reservoirs. What we have learned from this experience is that in situ combustion works under most conditions, but the nature of the problems is such that it is seldom profitable. Also, looking at many previous in situ combustion tests, steam injection, and even waterflooding, would have been a better choice. Yet in situ combustion has unique features not found in any other EOR method. These must be weighed against its shortcomings to evaluate a potential application. This paper discusses the redeeming features of in situ combustion, in particular the reservoir conditions under which in situ combustion may be superior to other EOR methods are outlined. All variations of in situ combustion - forward, reverse, wet, dry - as well as combinations with other EOR methods are considered. The conclusions is that in situ combustion still has a place, and its future application would depend on research on certain crucial aspects of the process.

Farouq Ali, S.M. [Univ. of Alberta, Edmonton (Canada)

1995-02-01T23:59:59.000Z

357

NETL- High-Pressure Combustion Research Facility  

SciTech Connect (OSTI)

NETL's High-Pressure Combustion Facility is a unique resource within the National Laboratories system. It provides the test capabilities needed to evaluate new combustion concepts for high-pressure, high-temperature hydrogen and natural gas turbines. These concepts will be critical for the next generation of ultra clean, ultra efficient power systems.

None

2013-07-08T23:59:59.000Z

358

Generating Resources Combined Cycle Combustion Turbine  

E-Print Network [OSTI]

turbine (s) Heat recovery steam generator (s) - HRSG with or without duct firing Natural gas supply11/17/2014 1 Generating Resources Combined Cycle Combustion Turbine Utility Scale Solar PV Steven doing recently around two key supply-side resource technologies 1. Combined Cycle Combustion Turbine

359

Coal slurry combustion and technology. Volume 2  

SciTech Connect (OSTI)

Volume II contains papers presented at the following sessions of the Coal Slurry Combustion and Technology Symposium: (1) bench-scale testing; (2) pilot testing; (3) combustion; and (4) rheology and characterization. Thirty-three papers have been processed for inclusion in the Energy Data Base. (ATT)

Not Available

1983-01-01T23:59:59.000Z

360

NETL- High-Pressure Combustion Research Facility  

ScienceCinema (OSTI)

NETL's High-Pressure Combustion Facility is a unique resource within the National Laboratories system. It provides the test capabilities needed to evaluate new combustion concepts for high-pressure, high-temperature hydrogen and natural gas turbines. These concepts will be critical for the next generation of ultra clean, ultra efficient power systems.

None

2014-06-26T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Pulse Combustion Characteristics of Various Gaseous Fuels  

Science Journals Connector (OSTI)

Pulse combustion performance of fuels with low and high heating values is also compared. ... Selected gaseous fuels such as low molecular weight hydrocarbons, high molecular weight hydrocarbons, biofuels, and mixed fuels are tested for pulse combustion, and their operational properties are presented and compared. ... Heat transfer data for several exptl. ...

Wu Zhonghua; Arun S. Mujumdar

2008-02-06T23:59:59.000Z

362

Combustion Modeling for Diesel Engine Control Design  

E-Print Network [OSTI]

Combustion Modeling for Diesel Engine Control Design Von der Fakult¨at f¨ur Maschinenwesen der Combustion Modeling for Diesel Engine Control Design WICHTIG: D 82 überprüfen !!! #12;Bibliographic research stays at General Motors R&D in Warren, MI, USA, possible. Furthermore, I would like thank Tom

Peters, Norbert

363

Boiler Combustion Control and Monitoring System  

Broader source: Energy.gov [DOE]

Efficiency of existing boilers can be improved in three ways; replacement with new boilers, replacement of the burner, or installation of a combustion control system. While installation of a new boiler or replacement of the burner can lead to the greatest efficiency gains, the higher costs associated with these measures typically leads to longer payback periods than combustion control systems.

364

Collaborative Combustion Research with BES | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Research with BES Collaborative Combustion Research with BES 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

365

Overview of Sonex Combustion Systems (SCS) for DI Engines | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Sonex Combustion Systems (SCS) for DI Engines Overview of Sonex Combustion Systems (SCS) for DI Engines The SCS system has undergone computational and experimental verification and...

366

Sandia National Laboratories: Low--Temperature Combustion Enables...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ECFacilitiesCRFLow--Temperature Combustion Enables Cleaner, More Efficient Engines Low--Temperature Combustion Enables Cleaner, More Efficient Engines Assessing the Economic...

367

Evaluation of High Efficiency Clean Combustion (HECC) Strategies...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion (HECC) Strategies for Meeting Future Emissions Regulations in Light-Duty Engines Evaluation of High Efficiency Clean Combustion (HECC) Strategies for Meeting Future...

368

2008 DOE Annual Merit Review Advanced Combustion Engines and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Combustion Engines and Fuels R&DTechnology Integration Plenary Session Overview 2008 DOE Annual Merit Review Advanced Combustion Engines and Fuels R&DTechnology...

369

High-Efficiency Clean Combustion Design for Compression Ignition...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-Efficiency Clean Combustion Design for Compression Ignition Engines High-Efficiency Clean Combustion Design for Compression Ignition Engines Presentation given at DEER 2006,...

370

Complete Fuel Combustion for Diesel Engines Resulting in Greatly...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Complete Fuel Combustion for Diesel Engines Resulting in Greatly Reduced Emissions and Improved Fuel Efficiency Complete Fuel Combustion for Diesel Engines Resulting in Greatly...

371

Syngas Enhanced High Efficiency Low Temperature Combustion for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Enhanced High Efficiency Low Temperature Combustion for Clean Diesel Engines Syngas Enhanced High Efficiency Low Temperature Combustion for Clean Diesel Engines A significant...

372

Non-Petroleum-Based Fuel Effects on Advanced Combustion | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Non-Petroleum-Based Fuel Effects on Advanced Combustion Non-Petroleum-Based Fuel Effects on Advanced Combustion 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit...

373

Catalyst for Improving the Combustion Efficiency of Petroleum...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

for Improving the Combustion Efficiency of Petroleum Fuels in Diesel Engines Catalyst for Improving the Combustion Efficiency of Petroleum Fuels in Diesel Engines 2005 Diesel...

374

World's Largest Post-Combustion Carbon Capture Project Begins...  

Broader source: Energy.gov (indexed) [DOE]

World's Largest Post-Combustion Carbon Capture Project Begins Construction World's Largest Post-Combustion Carbon Capture Project Begins Construction July 15, 2014 - 9:55am Addthis...

375

The Role of Advanced Combustion in Improving Thermal Efficiency  

Broader source: Energy.gov [DOE]

Combustion plays an important role in enabling high thermal efficiencies. Technologies that deliver short combustion duration and low soot emissions are needed.

376

Low-Temperature Diesel Combustion Cross-Cut Research | Department...  

Broader source: Energy.gov (indexed) [DOE]

Low-Temperature Diesel Combustion A Conceptual Model for Partially PremixedLow-Temperature Diesel Combustion Based onIn-Cylinder Laser Diagnostics and Chemical Kinetics Modeling...

377

Enabling High Efficiency Clean Combustion with Micro-Variable...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of variable orifice fuel injector are described that will extend the operation maps of early PCCI combustion and enable dual-mode combustion over full operating maps....

378

Low-Temperature Diesel Combustion Cross-Cut Research | Department...  

Broader source: Energy.gov (indexed) [DOE]

Low-Temperature Diesel Combustion Cross-Cut Research Low-Temperature Diesel Combustion Cross-Cut Research 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review...

379

Development of Fuel-Flexible Combustion Systems Utilizing Opportunity...  

Office of Environmental Management (EM)

Fuel-Flexible Combustion Systems Utilizing Opportunity Fuels in Gas Turbines - Fact Sheet, May 2014 Development of Fuel-Flexible Combustion Systems Utilizing Opportunity Fuels in...

380

Oscillatory Flame Response in Acoustically Coupled Fuel Droplet Combustion  

E-Print Network [OSTI]

and volumetric heats of combustion in biofuels render themVaporization [kJ/kg] Heat of Combustion [kJ/kg] †Estimated

Sevilla Esparza, Cristhian Israel

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

2014 Annual Merit Review Results Report - Advanced Combustion...  

Energy Savers [EERE]

Advanced Combustion Engine Technologies 2014 Annual Merit Review Results Report - Advanced Combustion Engine Technologies Merit review of DOE Vehicle Technologies research...

382

Advanced Combustion Technology to Enable High Efficiency Clean...  

Broader source: Energy.gov (indexed) [DOE]

Combustion System + Air Handling Air Handling + Sensors + Calibration Low P, High Flow Rate EGR + VVA - Simulated Robustness Advanced Combustion Concepts - Simulated 0.0...

383

Computationally Efficient Modeling of High-Efficiency Clean Combustion Engines  

Broader source: Energy.gov [DOE]

Document:  ace012_flowers_2013_o.pdfTechnology Area: Advanced Combustion; Combustion and Emissions ControlPresenter: Dan FlowersPresenting Organization: Lawrence Livermore National Laboratory (LLNL...

384

Haraldrud Municipal Solid Waste Combustion Plant in Oslo.  

E-Print Network [OSTI]

??This thesis has studied Haraldrud MSW combustion process. Haraldrud is a realcombustion plant burning waste for citizens of Oslo. A thoroughly description ofthe combustion process… (more)

Gudim, Simen Johan

2011-01-01T23:59:59.000Z

385

Combustion Turbine CHP System for Food Processing Industry -...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Turbine CHP System for Food Processing Industry - Presentation by Frito-Lay North America, June 2011 Combustion Turbine CHP System for Food Processing Industry -...

386

Oxygen-Enriched Combustion for Military Diesel Engine Generators...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion for Military Diesel Engine Generators Oxygen-Enriched Combustion for Military Diesel Engine Generators Substantial increases in brake power and considerably lower peak...

387

Modeling Combustion Control for High Power Diesel Mode Switching...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Control for High Power Diesel Mode Switching Modeling Combustion Control for High Power Diesel Mode Switching Poster presentation given at the 16th Directions in...

388

High Efficiency Clean Combustion for Heavy-Duty Engine  

Broader source: Energy.gov [DOE]

Explore advancements in engine combustion systems using high-efficiency clean combustion (HECC) techniques to minimize engine-out emissions while optimizing fuel economy.

389

Low Temperature Combustion and Diesel Emission Reduction Research...  

Broader source: Energy.gov (indexed) [DOE]

Low Temperature Combustion and Diesel Emission Reduction Research Low Temperature Combustion and Diesel Emission Reduction Research Presentation given at DEER 2006, August 20-24,...

390

Dilute Clean Diesel Combustion Achieves Low Emissions and High...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Dilute Clean Diesel Combustion Achieves Low Emissions and High Efficiency While Avoiding Control Problems of HCCI Dilute Clean Diesel Combustion Achieves Low Emissions and High...

391

Unregulated Emissions from High-Efficiency Clean Combustion Modes...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Unregulated Emissions from High-Efficiency Clean Combustion Modes - ORNL-FEERC Poster presentation at...

392

Low-Temperature Automotive Diesel Combustion | Department of...  

Energy Savers [EERE]

Diesel Combustion Low-Temperature Automotive Diesel Combustion 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation...

393

State Grid Biomass Fuel and Combustion Technology Laboratory...  

Open Energy Info (EERE)

Combustion Technology Laboratory Jump to: navigation, search Name: State Grid Biomass Fuel and Combustion Technology Laboratory Place: Beijing Municipality, China Sector: Biomass...

394

Fuel Effects on Ignition and Their Impact on Advanced Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ignition and Their Impact on Advanced Combustion Engines Fuel Effects on Ignition and Their Impact on Advanced Combustion Engines Presentation given at DEER 2006, August 20-24,...

395

Combustion Exhaust Gas Heat to Power Using Thermoelectric Engines...  

Broader source: Energy.gov (indexed) [DOE]

Combustion Exhaust Gas Heat to Power Using Thermoelectric Engines Combustion Exhaust Gas Heat to Power Using Thermoelectric Engines Discusses a novel TEG which utilizes a...

396

Hydrogen Assisted Diesel Combustion in a Common Rail Turbodiesel...  

Broader source: Energy.gov (indexed) [DOE]

Assisted Diesel Combustion in a Common Rail Turbodiesel Engine P-3 Hydrogen Assisted Diesel Combustion in a Common Rail Turbodiesel Engine P-3 Gregory Lilik, Jos Martn...

397

Hydrogen Assisted Diesel Combustion in a Common Rail Turbodiesel...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assisted Diesel Combustion in a Common Rail Turbodiesel Engine Hydrogen Assisted Diesel Combustion in a Common Rail Turbodiesel Engine This study measured the effects of hydrogen...

398

Heavy-Duty Low Temperature Combustion Development Activities...  

Broader source: Energy.gov (indexed) [DOE]

soot emissions - Cylinder pressure and rise rate limits - Low load combustion stabilityignition Robust combustion control - Cylinder-to-cylinder variability - Ambient...

399

2011 2nd Annual CEFRC Conference - Combustion Energy Frontier...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

chemistry and diagnostics (HansenYang) Chemical kinetics and transport of combustion processes (Wang) H2O number density measurements in an RCM and plasma combustion using...

400

Modeling of High Efficiency Clean Combustion Engines | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

merit08flowers.pdf More Documents & Publications Modeling of HCCI and PCCI Combustion Processes Numerical Modeling of HCCI Combustion Improving alternative fuel utilization:...

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Modeling of HCCI and PCCI Combustion Processes | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

HCCI and PCCI Combustion Processes Modeling of HCCI and PCCI Combustion Processes 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters...

402

Factors Affecting HCCI Combustion Phasing for Fuels with Single...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Affecting HCCI Combustion Phasing for Fuels with Single- and Dual-Stage Chemistry Factors Affecting HCCI Combustion Phasing for Fuels with Single- and Dual-Stage Chemistry 2004...

403

CFD Combustion Modeling with Conditional Moment Closure using Tabulated Chemistry  

Broader source: Energy.gov [DOE]

A method is presented that allows for efficient conditional moment closure combustion simulations through the use of a progress variable based parameterization of the combustion chemistry.

404

CFD Combustion Modeling with Conditional Moment Closure using...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Modeling with Conditional Moment Closure using Tabulated Chemistry CFD Combustion Modeling with Conditional Moment Closure using Tabulated Chemistry A method is...

405

Accurate Predictions of Fuel Effects on Combustion and Emissions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

on Combustion and Emissions in Engines Using CFD Simulations With Detailed Fuel Chemistry Accurate Predictions of Fuel Effects on Combustion and Emissions in Engines Using...

406

Numerical Modeling of PCCI Combustion | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Modeling of HCCI and PCCI Combustion Processes Numerical Modeling of HCCI Combustion Bridging the Gap between Fundamental Physics and Chemistry and Applied Models for HCCI Engines...

407

Fuel Effects on Advanced Combustion Engines | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Fuel Effects on Advanced Combustion: Heavy-Duty Optical-Engine Research Greenpower Trap Mufflerl System Low-Temperature Diesel Combustion...

408

High Efficiency Clean Combustion Engine Designs for Gasoline...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Efficiency Clean Combustion Engine Designs for Gasoline and Diesel Engines High Efficiency Clean Combustion Engine Designs for Gasoline and Diesel Engines 2009 DOE Hydrogen...

409

Light-Duty Diesel Combustion | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Light-Duty Diesel Combustion Light-Duty Diesel Combustion 2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting...

410

Light Duty Efficient Clean Combustion | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Light Duty Efficient Clean Combustion Light Duty Efficient Clean Combustion 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation...

411

Advanced Diesel Combustion with Low Hydrocarbon and Carbon Monoxide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion with Low Hydrocarbon and Carbon Monoxide Emissions Advanced Diesel Combustion with Low Hydrocarbon and Carbon Monoxide Emissions Poster presented at the 16th Directions...

412

Dry low NOx combustion system with pre-mixed direct-injection secondary fuel nozzle  

DOE Patents [OSTI]

A combustion system includes a first combustion chamber and a second combustion chamber. The second combustion chamber is positioned downstream of the first combustion chamber. The combustion system also includes a pre-mixed, direct-injection secondary fuel nozzle. The pre-mixed, direct-injection secondary fuel nozzle extends through the first combustion chamber into the second combustion chamber.

Zuo, Baifang; Johnson, Thomas; Ziminsky, Willy; Khan, Abdul

2013-12-17T23:59:59.000Z

413

Oxy-coal Combustion Studies  

SciTech Connect (OSTI)

The objective of this project is to move toward the development of a predictive capability with quantified uncertainty bounds for pilot-scale, single-burner, oxy-coal operation. This validation research brings together multi-scale experimental measurements and computer simulations. The combination of simulation development and validation experiments is designed to lead to predictive tools for the performance of existing air fired pulverized coal boilers that have been retrofitted to various oxy-firing configurations. In addition, this report also describes novel research results related to oxy-combustion in circulating fluidized beds. For pulverized coal combustion configurations, particular attention is focused on the effect of oxy-firing on ignition and coal-flame stability, and on the subsequent partitioning mechanisms of the ash aerosol. To these ends, the project has focused on the following: â?˘ The development of reliable Large Eddy Simulations (LES) of oxy-coal flames using the Direct Quadrature Method of Moments (DQMOM) (Subtask 3.1). The simulations were validated for both non-reacting particle-laden jets and oxy-coal flames. â?˘ The modifications of an existing oxy-coal combustor to allow operation with high levels of input oxygen to enable in-situ laser diagnostic measurements as well as the development of strategies for directed oxygen injection (Subtask 3.2). Flame stability was quantified for various burner configurations. One configuration that was explored was to inject all the oxygen as a pure gas within an annular oxygen lance, with burner aerodynamics controlling the subsequent mixing. â?˘ The development of Particle Image Velocimetry (PIV) for identification of velocity fields in turbulent oxy-coal flames in order to provide high-fidelity data for the validation of oxy-coal simulation models (Subtask 3.3). Initial efforts utilized a laboratory diffusion flame, first using gas-fuel and later a pulverized-coal flame to ensure the methodology was properly implemented and that all necessary data and image-processing techniques were fully developed. Success at this stage of development led to application of the diagnostics in a large-scale oxy-fuel combustor (OFC). â?˘ The impact of oxy-coal-fired vs. air-fired environments on SO{sub x} (SO{sub 2}, SO{sub 3}) emissions during coal combustion in a pilot-scale circulating fluidized-bed (CFB) (Subtask 3.4). Profiles of species concentration and temperature were obtained for both conditions, and profiles of temperature over a wide range of O{sub 2} concentration were studied for oxy-firing conditions. The effect of limestone addition on SO{sub 2} and SO{sub 3} emissions were also examined for both air- and oxy- firing conditions. â?˘ The investigation of O{sub 2}/CO{sub 2} and O{sub 2}/N{sub 2} environments on SO{sub 2 emissions during coal combustion in a bench-scale single-particle fluidized-bed reactor (Subtask 3.5). Moreover, the sulfation mechanisms of limestone in O{sub 2}/CO{sub 2} and O{sub 2}/N{sub 2} environments were studied, and a generalized gassolid and diffusion-reaction single-particle model was developed to study the effect of major operating variables. â?˘ The investigation of the effect of oxy-coal combustion on ash formation, particle size distributions (PSD), and size-segregated elemental composition in a drop-tube furnace and the 100 kW OFC (Subtask 3.6). In particular, the effect of coal type and flue gas recycle (FGR, OFC only) was investigated.

J. Wendt; E. Eddings; J. Lighty; T. Ring; P. Smith; J. Thornock; Y. Jia, W. Morris; J. Pedel; D. Rezeai; L. Wang; J. Zhang; K. Kelly

2012-01-01T23:59:59.000Z

414

Argonne TTRDC - Engines - Combustion Visualization - emissions,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Combustion Visualization Combustion Visualization Exploring Combustion Using Advanced Imaging Techniques In the photo, the GM diesel test cell is shown with vehicle exhaust aftertreatment hardware (diesel particulate filtration and diesel oxidation catalyst) along with other advanced technology-such as a variable geometry turbocharger, cooled exhaust gas recirculation and a common-rail fuel injection system. Fig. 1. The GM diesel test cell is shown with vehicle exhaust aftertreatment hardware (diesel particulate filtration and diesel oxidation catalyst) along with other advanced technology-such as a variable geometry turbocharger, cooled exhaust gas recirculation and a common-rail fuel injection system. Two-dimensional image of hydrogen combustion OH chemiluminescence. Fig. 2. Two-dimensional image of hydrogen combustion OH chemiluminescence.

415

Fine Particle Emissions from Combustion Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fine Particle Emissions from Combustion Systems Fine Particle Emissions from Combustion Systems Speaker(s): Allen Robinson Date: November 11, 2005 - 12:00pm Location: 90-3122 Combustion systems such as motor vehicles and power plants are major sources of fine particulate matter. This talk describes some of the changes in fine particle emissions that occur as exhaust from combustion systems mix with background air. This mixing cools and dilutes the exhaust which influences gas-particle partitioning of semi-volatile species, the aerosol size distribution, and the fine particle mass. Dilution sampling is used to characterize fine particle emissions from combustion systems because it simulates the rapid cooling and dilution that occur as exhaust mixes with the atmosphere. Results from dilution sampler

416

Advanced Combustion Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Science & Innovation » Clean Coal » Advanced Combustion Science & Innovation » Clean Coal » Advanced Combustion Technologies Advanced Combustion Technologies Joe Yip, a researcher at FE's National Energy Technology Laboratory, uses laser-based Rayleigh light scattering to measure flame density and speed over a flat flame burner. Oxyfuel combustion, using oxygen in place of air with diluents such as steam or carbon dioxide, can reduce pollutant emissions in advanced power cycles using gas turbines. Photo courtesy of NETL Multimedia. Joe Yip, a researcher at FE's National Energy Technology Laboratory, uses laser-based Rayleigh light scattering to measure flame density and speed over a flat flame burner. Oxyfuel combustion, using oxygen in place of air with diluents such as steam or carbon dioxide, can reduce pollutant

417

Accounting for Carbon Dioxide Emissions from Biomass Energy Combustion (released in AEO2010)  

Reports and Publications (EIA)

Carbon Dioxide (CO2) emissions from the combustion of biomass to produce energy are excluded from the energy-related CO2 emissions reported in Annual Energy Outlook 2010. According to current international convention, carbon released through biomass combustion is excluded from reported energy-related emissions. The release of carbon from biomass combustion is assumed to be balanced by the uptake of carbon when the feedstock is grown, resulting in zero net emissions over some period of time]. However, analysts have debated whether increased use of biomass energy may result in a decline in terrestrial carbon stocks, leading to a net positive release of carbon rather than the zero net release assumed by its exclusion from reported energy-related emissions.

2010-01-01T23:59:59.000Z

418

Advances in pulverized coal combustion  

SciTech Connect (OSTI)

A combustion system has been developed to operate cost effectively in the difficult regulatory and economic climate of the 1980's. The system is designed to reduce auxiliary fuel oil comsumption by at least 30% while meeting all relevant emissions limits. This is achieved with the fewest components consistent with practical reliable design criteria. The Controlled Flow Split/Flame low NO/sub x/ burner, MBF pulverizer and Two-Stage ignition system are integrated into a mutually supporting system which is applicable to both new steam generators and, on a retrofit basis, to existing units. In the future, a pulverized coal ignition system will be available to eliminate fuel oil use within the boiler.

Vatsky, J.

1981-01-01T23:59:59.000Z

419

Real-Time Control of Diesel Combustion Quality  

SciTech Connect (OSTI)

Detroit Diesel Corporation (DDC) and ORNL established this CRADA to improve heavy-duty engine efficiency with reduced emissions at relatively extreme operating regimes such has high EGR, low-load, and cold-start, with an emphasis on the application of advanced control strategies. The approach used in this collaborative effort was to include the application of novel analysis and modeling techniques devel-oped from the application of nonlinear dynamics and chaos theory. More specifically, analytical tech-niques derived from these theories were to used to detect, characterize, and control the combustion insta-bilities that are responsible for poor combustion performance and corresponding high emissions. The foundation of this CRADA was established based on ORNL expertise on the fundamentals of ad-vanced combustion operation and experience with nonlinear dynamics and controls in combustion sys-tems. The initial plan was all data generation would be performed at DDC with an agreed upon experi-mental plan formed by both organizations. While numerous experiments were performed at DDC and the data was exchanged with ORNL researchers, the team decided to transfer an engine to ORNL to allow more flexibility and data generation opportunities. A prototype DDC Series 60 with a common rail fuel system was selected and installed at ORNL. DDC and ORNL maintained a strong collaboration throughout much of this project. Direct funding from DOE ended in 2004 and DDC continued to fund at a reduced amount through 2007. This CRADA has not been funded in more recent years but has been maintained active in anticipation of restored funding. This CRADA has led to additional collaborations between DDC and ORNL.

Wagner, R.M.; Sisken, K (Detroit Diesel Corp.)

2010-06-30T23:59:59.000Z

420

Great lakes fluidized-bed combustion. Final report  

SciTech Connect (OSTI)

A program was conducted to design, construct, and operate an industrial fluidized bed combustion (FBC) boiler demonstration plant with a capacity of 50,000 lb/h steam. The following were the objectives of the program: (1) to extend the fluidized bed boiler design by employing natural circulation cooling; (2) to design, build, operate, test, and demonstrate a fluidized bed boiler that could burn high sulfur coal in an environmentally acceptable manner; and (3) to obtain sufficient data for industry to make an objective appraisal of fluidized bed coal burning boilers. Following a five-year design, development, and construction effort, the demonstration plant was first operated in June of 1981. Initial operation identified several equipment and operating problems, particularly in the areas of the fuel preparation and fuel feed systems. Unit operation and availability steadily improved, culminating in a 30-day continuous run ending in May 1982. Following shutdown, major problem areas such as bed tube failures were addressed by C-E and rectified prior to the start of the test program. Shakedown/testing operation commenced on August 12, 1983. The objectives for the test program were to establish the unit operating conditions required to optimize SO/sub 2/ removal and combustion efficiency for different operating modes, and to evaluate the long-term performance of components which are essential for reliable FBC operation. A total of 23 tests were run from February 16, 1984 to April 19, 1984. The test results demonstrated that FBC is an environmentally and commercially sound technology. Specificially, the required sulfur removal, low NO/sub x//CO emissions and high combustion efficiencies can be readily achieved. This report identifies the effects of recycle, excess air, Ca/S mole ratio, and overfire air on combustion efficiency, boiler efficiency, and emissions. 6 refs., 97 figs., 8 tabs.

Not Available

1985-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Low NOx combustion system for heavy oil  

SciTech Connect (OSTI)

As a result of the increasing demand for white oil as one of countermeasures for pollution control and as a fuel for motor vehicle, coupled with the increasing import of heavy crude oil, heavy oils such as asphalt and distillation residue have become surplus in Japan. It is difficult by the conventional low NOx technology to control the NOx emission from the industrial small and medium capacity boilers, which use heavy oil as their fuels. The authors have been developing and improving NOx control technologies for boilers such as low NOx burners, two-stage combustion methods and so on. They have developed a new combustion system for heavy oil, which generates less NOx and soot than conventional systems, by applying the knowledge, obtained in the course of their development of Coal Partial Combustor (CPC). The conventional low NOx combustion method for oil firing boilers has been developed based on decreasing the flame temperature and delaying the combustion reaction. In the system, however, the heavy oil shall be combusted in the intense reducing atmosphere at the high flame temperature between 1,500 C and 1,600 C, and then the combustions gas shall be cooled and oxidized by two-stage combustion air. With this system, NOx emission can be suppressed below 100ppm (converted as O{sub 2}=4%).

Kurata, Chikatoshi; Sasaki, Hideki

1999-07-01T23:59:59.000Z

422

Laser-assisted homogeneous charge ignition in a constant volume combustion chamber  

Science Journals Connector (OSTI)

Homogeneous charge compression ignition (HCCI) is a very promising future combustion concept for internal combustion engines. There are several technical difficulties associated with this concept, and precisely controlling the start of auto-ignition is the most prominent of them. In this paper, a novel concept to control the start of auto-ignition is presented. The concept is based on the fact that most HCCI engines are operated with high exhaust gas recirculation (EGR) rates in order to slow-down the fast combustion processes. Recirculated exhaust gas contains combustion products including moisture, which has a relative peak of the absorption coefficient around 3 ?m. These water molecules absorb the incident erbium laser radiations (?=2.79 ?m) and get heated up to expedite ignition. In the present experimental work, auto-ignition conditions are locally attained in an experimental constant volume combustion chamber under simulated EGR conditions. Taking advantage of this feature, the time when the mixture is thought to “auto-ignite” could be adjusted/controlled by the laser pulse width optimisation, followed by its resonant absorption by water molecules present in recirculated exhaust gas.

Dhananjay Kumar Srivastava; Martin Weinrotter; Henrich Kofler; Avinash Kumar Agarwal; Ernst Wintner

2009-01-01T23:59:59.000Z

423

Characterisation of laser ignition in hydrogen–air mixtures in a combustion bomb  

Science Journals Connector (OSTI)

Laser-induced spark ignition of lean hydrogen–air mixtures was experimentally investigated using nanosecond pulses generated by Q-switched Nd:YAG laser (wavelength 1064 nm) at initial pressure of 3 MPa and temperature 323 K in a constant volume combustion chamber. Laser ignition has several advantages over conventional ignition systems especially in internal combustion engines, hence it is necessary to characterise the combustion phenomena from start of plasma formation to end of combustion. In the present experimental investigation, the formation of laser plasma by spontaneous emission technique and subsequently developing flame kernel was measured. Initially, the plasma propagates towards the incoming laser. This backward moving plasma (towards the focusing lens) grows much faster than the forward moving plasma (along the direction of laser). A piezoelectric pressure transducer was used to measure the pressure rise in the combustion chamber. Hydrogen–air mixtures were also ignited using a spark plug under identical experimental conditions and results are compared with the laser ignition ones.

Dhananjay Kumar Srivastava; Martin Weinrotter; Kurt Iskra; Avinash Kumar Agarwal; Ernst Wintner

2009-01-01T23:59:59.000Z

424

Gas turbine alternative fuels combustion characteristics  

SciTech Connect (OSTI)

An experimental investigation was conducted to obtain combustion performance and exhaust pollutant concentrations for specific synthetic hydrocarbon fuels. Baseline comparison fuels used were gasoline and diesel fuel number two. Testing was done over a range of fuel to air mass ratios, total mass flow rates, and input combustion air temperatures in a flame-tube-type gas turbine combustor. Test results were obtained in terms of released heat and combustion gas emission values. The results were comparable to those obtained with the base fuels with variations being obtained with changing operating conditions. The release of carbon particles during the tests was minimal. 22 refs., 12 figs., 2 tabs.

Rollbuhler, R.J.

1989-02-01T23:59:59.000Z

425

In Situ NMR Spectroscopy of Combustion  

Science Journals Connector (OSTI)

In situ nuclear magnetic resonance spectroscopy (NMR) of high-temperature reactions is of potential value for the investigation of catalytic combustion and other high-temperature applications of catalysts such as partial oxidation of hydrocarbons and steam reforming. ... Two-dimensional (2D) studies of gas exchange within different heat zones of the combustion process provide valuable insights into the gas-phase dynamics. ... This may be the case at the high combustion temperatures, but neither experimental nor theoretical xenon chemical shift data is available in current literature for temperatures above 1000 K. ...

Satyanarayana Anala; Galina E. Pavlovskaya; Prakash Pichumani; Todd J. Dieken; Michael D. Olsen; Thomas Meersmann

2003-10-07T23:59:59.000Z

426

Combustion in cracks of PBX 9501  

SciTech Connect (OSTI)

Recent experiments involving the combustion of PBX 9501 explosive under confined conditions reveal the importance of crack and flaws in reaction violence. Experiments on room temperature confined disks of pristine and thermally damaged PBX 9501 reveal that crack ignition depends on hot gases entering existing or pressure induced cracks rather than on energy release at the crack tip. PBX 9501 slot combustion experiments show that the reaction propagation rate in the slot does not depend on the external pressure. We have observed 1500 d s in long slots of highly-confined PBX 9501. We present experiments that examine the combustion of mechanically and thermally damaged samples of PBX 9501.

Berghout, H. L. (Henry L.); Son, S. F. (Steven F.); Bolme, C. A. (Cynthia A.); Hill, L. G. (Larry G.); Asay, B. W. (Blaine W.); Dickson, P. M. (Peter M.); Henson, B. F. (Bryan F.); Smilowitz, L. B. (Laura B.)

2002-01-01T23:59:59.000Z

427

Combustion characterization of beneficiated coal-based fuels. Quarterly report No. 6, July 1990--September 1990  

SciTech Connect (OSTI)

The Pittsburgh Energy Technology Center of the US Department of Energy has contracted with Combustion Engineering, Inc. (CE) to perform a three-year project on ``Combustion Characterization of Beneficiated Coal-Based Fuels.`` The beneficiated coals are produced by other contractors under the DOE Coal Preparation Program. Several contractor-developed advanced coal cleaning processes are being run at the cleaning facility in Homer City, Pennsylvania, to produce 20-ton batches of fuels for shipment to CE`s laboratory in Windsor, Connecticut. CE then processes the products into either a coal-water fuel (CVVT) or a dry microfine pulverized coal (DMPC) form for combustion testing. The objectives of this project include: (1) the development of an engineering data base which will provide detailed information on the properties of BCFs influencing combustion, ash deposition, ash erosion, particulate collection, and emissions; and (2) the application of this technical data base to predict the performance and economic impacts of firing the BCFs in various commercial boiler designs. The technical approach used to develop the technical data includes: bench-scale fuel property, combustion, and ash deposition tests; pilot-scale combustion and ash effects tests; and full-scale combustion tests. Subcontractors to CE to perform parts of the test work are the Massachusetts Institute of Technology (MIT), Physical Science, Inc. Technology Company (PSIT) and the University of North Dakota Energy and Environmental Research Center (UNDEERC). Twenty fuels will be characterized during the three-year base program: three feed coals, fifteen BCFS, and two conventionally cleaned coals for full-scale tests. Approximately, nine BCFs will be in dry microfine coal (DMPC) form, and six BCFs will be in coal-water fuel (CWF) form. Additional BCFs would be characterized during optional project supplements.

Chow, O.K.; Nsakala, N.Y.

1990-11-01T23:59:59.000Z

428

Diesel knock noise from combustion phenomenon to perceived signals  

E-Print Network [OSTI]

Diesel knock noise from combustion phenomenon to perceived signals O. Sauvagea , A. Lauracb , M for reducing Diesel knock are modifications of engine parameters used for controlling combustion processes-acoustic properties, throught its noticeable combustion noise (also called "Diesel knock"). Combustion noise generated

Paris-Sud XI, Université de

429

Thermodynamic Analysis of Alternative Approaches to Chemical Looping Combustion  

Science Journals Connector (OSTI)

Thermodynamic Analysis of Alternative Approaches to Chemical Looping Combustion ... Because H2 and syngas have similar combustion irreversibilities, when reforming is done optimally (with TR close to 650 K), iso-octane can be combusted with the same efficiency as that of preheated, isothermal H2 combustion. ... A loop of chem. ...

V. Kalyana Chakravarthy; C. Stuart Daw; Josh A. Pihl

2011-01-19T23:59:59.000Z

430

US National Technical Meeting of the Combustion Institute  

E-Print Network [OSTI]

potential to enhance combustion performance in gas turbines and scramjet engines. Extensive efforts have

Ju, Yiguang

431

Robust Feedback Control of Combustion Instability with Modeling Uncertainty  

E-Print Network [OSTI]

to mod- ulate combustion processes in propulsion sys- tems has recently received extensive attention [1

Ray, Asok

432

admission guide International  

E-Print Network [OSTI]

2015/ 2016 admission guide International First-Year Students #12;2 3 WORLDWIDE RECOGNITION (2008 and Digital Media Critical Studies* Integrated Critical Practice* Production* German Studies Global Economics Networks Computer Science Computer Science: Computer Game Design Electrical Engineering Communications

California at Santa Cruz, University of

433

International petroleum statistics report  

SciTech Connect (OSTI)

This report presents data on international oil production, demand, imports, exports, and stocks. World oil production and OECD demand data are for the years 1970 through 1994; OECD stocks from 1973 through 1994; and OECD trade from 1984 through 1994.

NONE

1996-03-01T23:59:59.000Z

434

International petroleum statistics report  

SciTech Connect (OSTI)

This report presents data on international oil production, demand, imports, and stocks. World oil production and OECD demand data are for the years 1970 through 1995; stocks from 1973 through 1995, and trade from 1985 through 1995.

NONE

1996-12-01T23:59:59.000Z

435

Balancing act creating the right regulation for coal combustion waste  

SciTech Connect (OSTI)

The December 2008 collapse of a coal ash pond in Tennessee threw safe management of coal combustion waste (CCW) into the spotlight. Millions of tons of CCW are produced in the United States each year, and a large percentage of that is recycled. The US Environmental Protection Agency is pursuing a host of initiatives that could directly or indirectly affect the disposition of CCW. States, too, are taking a look at how they regulate CCW. Among the options is the possibility of regulating CCW under the Resource Conservation and Recovery Act, a move that could have far-reaching implications for both the recycling and the disposal of this waste.

Manuel, J.

2009-11-15T23:59:59.000Z

436

Beneficial use of coal combustion products continues to grow  

SciTech Connect (OSTI)

In August 2007 the American Coal Ash Association (ACAA) released results of the Coal Combustion Products Production (CCP) and use survey. Production was 124,795,000 tons while beneficial use was 54,203,000 tons, a utilization rate of over 43%, 3% higher than in 2005. The article includes graphs of 40 years of CCP production and use and projected trade of CCP utilization until 2011. It also gives 2006 figures for Production and use of fly ash, bottom ash, boiler slag, FGD gypsum and other FGD products, and FBC ash. 3 refs., 3 figs.

MacDonald, M. [American Coal Ash Association (United States)

2008-07-01T23:59:59.000Z

437

Emission formation during wood log combustion in fireplaces â?? part I: volatile combustion stage  

Science Journals Connector (OSTI)

A CFD-based tool for the analysis of combustion and emissions in batch-fired wood log combustion is introduced. It consists of submodels for drying and pyrolysis of a wood log, for combustion of volatilised fuel and char, for radiative heat transfer, and for NO formation implemented in a commercial CFD-programme (Fluent) for turbulent flows. Comparing model predictions to experimental data in a test oven shows the applicability of the different submodels and combination of them.

M. Huttunen; J. Saastamoinen; P. Kilpinen; L. Kjaldman; H. Oravainen; S. Bostrom

2006-01-01T23:59:59.000Z

438

Biomass Combustion Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Combustion Systems Inc Combustion Systems Inc Jump to: navigation, search Name Biomass Combustion Systems Inc Address 67 Millbrook St Place Worcester, Massachusetts Zip 01606 Sector Biomass Product Combustion systems for wood fuel Website http://www.biomasscombustion.c Coordinates 42.290195°, -71.799627° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.290195,"lon":-71.799627,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

439

Chemical Looping for Combustion and Hydrogen Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ChemiCal looping for Combustion and ChemiCal looping for Combustion and hydrogen produCtion Objective The objective of this project is to determine the benefits of chemical looping technology used with coal to reduce CO 2 emissions. Background Chemical looping is a new method to convert coal or gasified coal to energy. In chemical looping, there is no direct contact between air and fuel. The chemical looping process utilizes oxygen from metal oxide oxygen carrier for fuel combustion, or for making hydrogen by "reducing" water. In combustion applications, the products of chemical looping are CO 2 and H 2 O. Thus, once the steam is condensed, a relatively pure stream of CO 2 is produced ready for sequestration. The production of a sequestration ready CO 2 stream does not require any additional separation units

440

The Role of Volatiles in Coal Combustion  

Science Journals Connector (OSTI)

Our knowledge of the role of volatiles in coal combustion ranges at this time from the self-evident to the ambiguous. The clearest point on which all agree is that pyrolysis will occur during the total coal co...

Robert H. Essenhigh; Eric M. Suuberg

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Oil shale retorting and combustion system  

DOE Patents [OSTI]

The present invention is directed to the extraction of energy values from l shale containing considerable concentrations of calcium carbonate in an efficient manner. The volatiles are separated from the oil shale in a retorting zone of a fluidized bed where the temperature and the concentration of oxygen are maintained at sufficiently low levels so that the volatiles are extracted from the oil shale with minimal combustion of the volatiles and with minimal calcination of the calcium carbonate. These gaseous volatiles and the calcium carbonate flow from the retorting zone into a freeboard combustion zone where the volatiles are burned in the presence of excess air. In this zone the calcination of the calcium carbonate occurs but at the expense of less BTU's than would be required by the calcination reaction in the event both the retorting and combustion steps took place simultaneously. The heat values in the products of combustion are satisfactorily recovered in a suitable heat exchange system.

Pitrolo, Augustine A. (Fairmont, WV); Mei, Joseph S. (Morgantown, WV); Shang, Jerry Y. (Fairfax, VA)

1983-01-01T23:59:59.000Z

442

Coal Combustion By-Products (Maryland)  

Broader source: Energy.gov [DOE]

The Department of the Environment is responsible for regulating fugitive air emissions from the transportation of coal combustion by-products and the permissible beneficial uses of these by...

443

Control of NOx by combustion process modifications  

E-Print Network [OSTI]

A theoretical and experimental study was carried out to determine lower bounds of NOx emission from staged combustion of a 0.7%N #6 fuel oil. Thermodynamic and chemical kinetic calculations have shown minimum NOx emissions ...

Ber?, J. M.

1981-01-01T23:59:59.000Z

444

Virtual Design of Stirling Engine Combustion Chamber  

Science Journals Connector (OSTI)

The paper deals with the designing of a combustion chamber of the Stirling engine using the CFD approach. Virtual prototypes enabled ... . The presented results help to increase the Stirling engine efficiency tog...

Z. Kaplan; P. Novotný; V. Píšt?k

2010-01-01T23:59:59.000Z

445

Vortex driven flame dynamics and combustion instability  

E-Print Network [OSTI]

Combustion instability in premixed combustors mostly arises due to the coupling between heat release rate dynamics and system acoustics. It is crucial to understand the instability mechanisms to design reliable, high ...

Altay, Hurrem Murat

2005-01-01T23:59:59.000Z

446

State of Industrial Fluidized Bed Combustion  

E-Print Network [OSTI]

A new combustion technique has been developed in the last decade that permits the burning of low quality coal, lignite and other fuels, while maintaining stack emissions within State and Federal limits. Low quality fuels can be burned directly...

Mesko, J. E.

1982-01-01T23:59:59.000Z

447

Fundamental Studies in Syngas Premixed Combustion Dynamics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Studies Studies in Syngas Premixed Combustion Dynamics Ahmed F. Ghoniem, Anuradha M. Annaswamy, Raymond L. Speth, H. Murat Altay Massachusetts Institute of Technology SCIES Project 05-01-SR121 Project Awarded (08/01/2005, 36 Month Duration) Needs & Objectives Gas Turbine Needs Flexibility to operate with variable syngas compositions Ensure stable operation over a wide range of conditions Reduce emissions of CO and NO x Project Objectives Study experimentally lean premixed syngas combustion

448

Oxy-combustion: Oxygen Transport Membrane Development  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

combustion: Oxygen Transport combustion: Oxygen Transport Membrane Development Background The mission of the U.S. Department of Energy's (DOE) Existing Plants, Emissions & Capture (EPEC) Research & Development (R&D) Program is to develop innovative environmental control technologies to enable full use of the nation's vast coal reserves, while at the same time allowing the current fleet of coal-fired power plants to comply with existing and emerging environmental regulations. The EPEC R&D

449

Building America Expert Meeting: Combustion Safety  

SciTech Connect (OSTI)

This is a meeting overview of 'The Best Approach to Combustion Safety in a Direct Vent World', held June 28, 2012, in San Antonio, Texas. The objective of this Expert Meeting was to identify gaps and barriers that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy efficiency and code communities.

Brand, L.

2013-03-01T23:59:59.000Z

450

Materials performance in coal-fired fluidized-bed combustion environments  

SciTech Connect (OSTI)

Development of cogeneration systems that involve combustion of coal in a fluidized bed for the generation of electricity and process heat has been in progress for a number of years. This paper addresses some of the key components in these systems, materials requirements/performance, and areas where additional effort is needed to improve the viability of these concepts for electric power generation.

Natesan, K.

1993-07-01T23:59:59.000Z

451

Laboratory investigations of low frequency sound attenuation over combustion flat perforated wall sheet  

E-Print Network [OSTI]

sheet Q. Qina , P. Rubinia , C. Jayatungab and V. Sandersonb a The University of Hull, The Acoustics Turbomachinery Ltd, PO Box 1, Waterside South, LN5 7FD Lincoln, UK q.qin@hull.ac.uk Proceedings of the Acoustics in turbine combustors for many years. The main purpose of the holes on the combustion chambers is to cool

Boyer, Edmond

452

Controlled combustion-zone firing of hogged fuel in new and retrofit boiler applications  

SciTech Connect (OSTI)

A new concept of furnace design embodying a well-defined primary combustion zone for wood waste has proven successful after two years of operation. The design was incorporated in a major rebuild of another boiler, and operation confirms its viability. (Refs. 7).

MacCallum, C.

1983-09-01T23:59:59.000Z

453

Rapid Deployment of Rich Catalytic Combustion  

SciTech Connect (OSTI)

The overall objective of this research under the Turbines Program is the deployment of fuel flexible rich catalytic combustion technology into high-pressure ratio industrial gas turbines. The resulting combustion systems will provide fuel flexibility for gas turbines to burn coal derived synthesis gas or natural gas and achieve NO{sub x} emissions of 2 ppmvd or less (at 15 percent O{sub 2}), cost effectively. This advance will signify a major step towards environmentally friendly electric power generation and coal-based energy independence for the United States. Under Phase 1 of the Program, Pratt & Whitney (P&W) performed a system integration study of rich catalytic combustion in a small high-pressure ratio industrial gas turbine with a silo combustion system that is easily scalable to a larger multi-chamber gas turbine system. An implementation plan for this technology also was studied. The principal achievement of the Phase 1 effort was the sizing of the catalytic module in a manner which allowed a single reactor (rather than multiple reactors) to be used by the combustion system, a conclusion regarding the amount of air that should be allocated to the reaction zone to achieve low emissions, definition of a combustion staging strategy to achieve low emissions, and mechanical integration of a Ceramic Matrix Composite (CMC) combustor liner with the catalytic module.

Richard S. Tuthill

2004-06-10T23:59:59.000Z

454

Effect of Oxyfuel Combustion on Superheater Corrosion  

SciTech Connect (OSTI)

Combustion of coal in an oxygen environment (as opposed to air) will facilitate the sequestering of carbon dioxide by minimizing the amount of nitrogen in the exit gas stream. The presence of higher levels of certain gases associated with oxyfuel combustion (eg, CO2, SO2, and H2O) may impact the corrosion of waterwalls, superheaters, headers, reheaters, and other boiler components. Research is being conducted on bare and ash-embedded boiler tube materials in simulated oxyfuel- combustion and air-combustion environments at a superheater temperature of 675°C. Alloys were exposed at temperature to two different gaseous environments. Preliminary results show: (1) an increase in corrosion rate of bare K02707, K11547, K21590, K91560, K92460, S30409, S34700, and N06617 exposed to the oxyfuel combustion environment when compared to the air combustion environment; (2) an increase in corrosion rate of alloys K21590, K92460, S34700, and N06617, when embedded in ash in comparison to bare exposure; and (3) no effect of gaseous environment on alloy corrosion rate when embedded in ash.

Covino, B.S., Jr.; Matthes, S.A.; Bullard, S.J.

2008-03-16T23:59:59.000Z

455

Combustion Characteristics, Emissions and Heat Release Rate Analysis of a Homogeneous Charge Compression Ignition Engine with Exhaust Gas Recirculation Fuelled with Diesel  

Science Journals Connector (OSTI)

The EGR, a very well-known method for NOx reduction in diesel engines, is also a method in HCCI combustion mode, when fuelled with commercial fuel, to improve engine power, mainly because of the increase of the ignition delay. ... Heywood, J. B. “Internal Combustion Engine Fundamentals”, Ed. McGraw-Hill Book Company, Singapur (Singapur), 1988. ... (Mechanical Engineering Laboratory MITI) “Chemical Kinetic Study of a Cetane Number Enhancing Additive for an LGP DI Diesel Engine,” ...

Miguel Torres García; Francisco J. Jiménez-Espadafor Aguilar; Tomás Sánchez Lencero

2009-04-02T23:59:59.000Z

456

Combustion kinetics and reaction pathways  

SciTech Connect (OSTI)

This project is focused on the fundamental chemistry of combustion. The overall objectives are to determine rate constants for elementary reactions and to elucidate the pathways of multichannel reactions. A multitechnique approach that features three independent experiments provides unique capabilities in performing reliable kinetic measurements over an exceptionally wide range in temperature, 300 to 2500 K. Recent kinetic work has focused on experimental studies and theoretical calculations of the methane dissociation system (CH{sub 4} + Ar {yields} CH{sub 3} + H + Ar and H + CH{sub 4} {yields} CH{sub 3} + H{sub 2}). Additionally, a discharge flow-photoionization mass spectrometer (DF-PIMS) experiment is used to determine branching fractions for multichannel reactions and to measure ionization thresholds of free radicals. Thus, these photoionization experiments generate data that are relevant to both reaction pathways studies (reaction dynamics) and fundamental thermochemical research. Two distinct advantages of performing PIMS with high intensity, tunable vacuum ultraviolet light at the National Synchrotron Light Source are high detection sensitivity and exceptional selectivity in monitoring radical species.

Klemm, R.B.; Sutherland, J.W. [Brookhaven National Laboratory, Upton, NY (United States)

1993-12-01T23:59:59.000Z

457

A comparative assessment of alternative combustion turbine inlet air cooling system  

SciTech Connect (OSTI)

Interest in combustion turbine inlet air cooling (CTAC) has increased during the last few years as electric utilities face increasing demand for peak power. Inlet air cooling increases the generating capacity and decreases the heat rate of a combustion turbine during hot weather when the demand for electricity is generally the greatest. Several CTAC systems have been installed, but the general applicability of the concept and the preference for specific concepts is still being debated. Concurrently, Rocky Research of Boulder City, Nevada has been funded by the U.S. Department of Energy to conduct research on complex compound (ammoniated salt) chiller systems for low-temperature refrigeration applications.

Brown, D.R.; Katipamula, S.; Konynenbelt, J.H.

1996-02-01T23:59:59.000Z

458

Reducible Oxide Based Oxygen Carriers for Chemical Looping Combustion and Partial Oxidation of Methane.  

E-Print Network [OSTI]

??Chemical looping combustion (CLC) is a novel combustion technology that offers a highly efficient route towards clean combustion of fuel with inherent CO2 capture. In… (more)

Bhavsar, Saurabh

2014-01-01T23:59:59.000Z

459

An In-Cylinder Imaging Survey of Low-Temperature, High-Efficiency Combustion Strategies  

Broader source: Energy.gov [DOE]

High speed imaging of in-cylinder spray and combustion luminosity of low temperature combustion strategies are contrasted to conventional gasoline and diesel engine combustion

460

Advanced High Efficiency Clean Diesel Combustion with Low Cost for Hybrid Engines  

Broader source: Energy.gov [DOE]

Clean, in-cylinder combustion can be enabled by a micro-variable circular orifice, dual mode PCCI, dew film combustion, and a novel combustion chamber design

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Emissions of trace gases and aerosols during the open combustion of biomass in the laboratory  

E-Print Network [OSTI]

emissions during biomass combustion: Controlling factors andfrom smoldering combustion of biomass measured by open-pathduring the open combustion of biomass in the laboratory

McMeeking, Gavin R.

2009-01-01T23:59:59.000Z

462

Fuel Effects on Advanced Combustion: Heavy-Duty Optical-Engine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Fuel Effects on Advanced Combustion: Heavy-Duty Optical-Engine Research Fuels and Combustion Strategies for High-Efficiency Clean-Combustion...

463

Combustion Synthesis of Silicon Carbide 389 Combustion Synthesis of Silicon Carbide  

E-Print Network [OSTI]

Combustion Synthesis of Silicon Carbide 389 X Combustion Synthesis of Silicon Carbide Alexander S velocity and 17 #12;Properties and Applications of Silicon Carbide390 reaction rate throughout the mixture by graphite during SHS of carbides. Local reaction initiation is typically accomplished by hot tungsten wire

Mukasyan, Alexander

464

Technological developments to improve combustion efficiency and pollution control in coal-fired power stations in Japan  

SciTech Connect (OSTI)

In 1975, approximately 60 percent of all power generating facilities in Japan were oil fired. The oil crisis in the 1970s, however, led Japanese power utilities to utilize alternatives to oil as energy sources, including nuclear power, coal, LNG, and others. As a result, by 1990, the percentage of oil-fired power generation facilities had declined to approximately 31 percent. On the other hand, coal-fired power generation, which accounted for 5.7 percent of all facilities in 1975, increased its share to 7.5 percent in 1990 and is anticipated to expand further to 13 percent by the year 2000. In order to increase the utilization of coal-fired power generation facilities in Japan, it is necessary to work out thorough measures to protect the environment, mainly to control air pollution. The technologies that are able to do this are already available. The second issue is how to improve efficiency. In this chapter, I would like to introduce technological developments that improve efficiency and that protect the environment which have been implemented in coal-fired power stations in Japan. Examples of the former, include the atmospheric fluidized bed combustion (AFBC) boiler, the pressurized fluidized bed combustion (PFBC) boiler, and the ultra super-critical (USC) steam condition turbine, and an example of the latter is the dry deSOx/deNOx. Although details are not provided in this paper, there are also ongoing projects focusing on the development of technology for integrated gasification combined cycle generation, fuel cells and other systems undertaken by the government, i.e., the Ministry of International Trade and Industry (MITI), which is committed to the New Energy and Industrial Technology Development Organization (NEDO).

Miyasaka, Tadahisa

1993-12-31T23:59:59.000Z

465

Utilization of Combustion?Driven Oscillations  

Science Journals Connector (OSTI)

The possible applications of combustion?driven oscillations fall into two categories. The first category includes applications that are related to the combustion process itself such as those concerned with the possibility of alterlog space heat?release rate combustion efficiency heat transfer to surfaces and agglomeration of solid or liquid products of combustion. A consideration of available experimental and theoreticalinformation indicates that none of these applications are too promising when compared with alternative methods of performing the same functions. The second category includes applications that use pulsatory phenomena to do a particular iob. Examples are the application of valveless pulse jets to (a) the propulsion of drones (b) helicopter blade?tip propulsion (c) cutting of Arctic ice and (d) inducing pressure rises in through?flow combustion systems. For one reason or another most of these ideas have been dropped. However the use of the pulsating?combustion process to supply both the air at a high flow velocity to a combustor and the products of combustion at a high velocity to a heat exchanger thereby making possible a compact self?contained unit appears to have great promise. One such unit of residential boiler size is already available. Although this unit is valved as was the V?1 conversion to a valveless unit appears possible. The development of industrial?sized units appears equally feasible. Apparently the development of such units is contingent upon (a) adequate understanding of how to design effective aerodynamic valves and (b) the collaboration of an inventor experimentalist analyst and financier on a specific program.

Abbott A. Putnam

1963-01-01T23:59:59.000Z

466

High-Speed Combustion and Detonation Project Scaling Up for Mira | Argonne  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

High-Speed Combustion and Detonation Project Scaling Up for Mira High-Speed Combustion and Detonation Project Scaling Up for Mira March 26, 2013 Printer-friendly version Researchers at the Argonne Leadership Computing Facility (ALCF) are simulating the high-speed combustion and detonation of hydrogen-oxygen mixtures to enable safer and more widespread use of hydrogen as an alternative fuel. This is one of 16 projects in the ALCF's Early Science Program (ESP), which is aimed at preparing key scientific applications for the architecture and scale of Mira, Argonne's new 10-petaflop IBM Blue Gene/Q supercomputer. Using pre-production time on Mira for real scientific problems, these projects vet the system and gather knowledge that will help future projects take full advantage of Mira's vastly increased power and capabilities when it goes into production later this year.

467

DOE Awards Cooperative Agreement for Post-Combustion Carbon Capture Project  

Broader source: Energy.gov (indexed) [DOE]

Awards Cooperative Agreement for Post-Combustion Carbon Capture Awards Cooperative Agreement for Post-Combustion Carbon Capture Project DOE Awards Cooperative Agreement for Post-Combustion Carbon Capture Project March 12, 2010 - 12:00pm Addthis Washington, D.C. -- The U.S. Department of Energy has awarded a cooperative agreement to American Electric Power Service Corporation (AEP) for the Mountaineer Commercial Scale Carbon Capture and Storage (CCS) Project to design, construct, and operate a system that will capture and store approximately 1.5 million tons per year of carbon dioxide (CO2). The project was a third round selection under DOE's Clean Coal Power Initiative, a cost-shared collaboration between the federal government and private industry aimed at stimulating investment in low-emission coal-based power generation technology through successful commercial demonstrations.

468

SYMPOSIUM ON TURBULENCE AND COMBUSTION - SPECIAL SYMPOSIUM TO BRING TOGETHER TOP RESEARCHERS IN THE FIELDS OF FLUID TURBULENCE AND COMBUSTION TO PROMOTE ADVANCES IN TURBULENT, REACTING FLOWS  

SciTech Connect (OSTI)

A Symposium on Turbulence and Combustion was held at Cornell University on August 3-4, 2009. The overall goal of the Symposium was to promote future advances in the study of turbulence and combustion, through an unique forum intended to foster interactions between leading members of these two research communities. The Symposium program consisted of twelve invited lectures given by world-class experts in these fields, two poster sessions consisting of nearly 50 presentations, an open forum, and other informal activities designed to foster discussion. Topics covered in the lectures included turbulent dispersion, wall-bounded flows, mixing, finite-rate chemistry, and others, using experiment, modeling, and computations, and included perspectives from an international community of leading researchers from academia, national laboratories, and industry.

Caughey, David

2010-10-08T23:59:59.000Z

469

International Fuel Technology Inc | Open Energy Information  

Open Energy Info (EERE)

Fuel Technology Inc Fuel Technology Inc Jump to: navigation, search Name International Fuel Technology Inc Place St. Louis, Missouri Zip 63105 Product Supplier of environmentally friendly surfactant-based fuel additives designed to significantly reduce harmful emissions produced from internal combustion engines. References International Fuel Technology Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. International Fuel Technology Inc is a company located in St. Louis, Missouri . References ↑ "International Fuel Technology Inc" Retrieved from "http://en.openei.org/w/index.php?title=International_Fuel_Technology_Inc&oldid=347044" Categories: Clean Energy Organizations

470

Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FEMP Technology FEMP Technology Brief: Boiler Combustion Control and Monitoring System to someone by E-mail Share Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion Control and Monitoring System on Facebook Tweet about Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion Control and Monitoring System on Twitter Bookmark Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion Control and Monitoring System on Google Bookmark Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion Control and Monitoring System on Delicious Rank Federal Energy Management Program: FEMP Technology Brief: Boiler Combustion Control and Monitoring System on Digg Find More places to share Federal Energy Management Program: FEMP

471

Flamelet model for pulverized coal combustion  

Science Journals Connector (OSTI)

Abstract A new flamelet model applicable to the simulation of pulverized coal combustion has been developed. First, a modeling approach that considers the coupling with both devolatilization and char combustion was adopted. We changed the fuel composition of the flamelet equation relative to the states of devolatilization and char combustion. In order to determine the fuel composition coming through the char combustion, all the gasified char was assumed to be converted into CO by the oxidation reaction. The validity of the developed flamelet model was examined in a simple two-dimensional pulverized coal jet field ignited by burnt co-flows. The accuracy of the model was evaluated by comparing its instantaneous distributions of temperature, CO2 mass fraction, and OH mass fraction with those of a detailed chemistry model. Good agreement was obtained in terms of the overall features of turbulent structures and combustion state, although the flamelet model showed slightly quicker ignition due to the transitional state in the ignition process being insufficiently reproducible.

Junya Watanabe; Kenji Yamamoto

2014-01-01T23:59:59.000Z

472

Descargue Datos de Ahorro de Combustible  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Descargue Datos de Ahorro de Combustible Descargue Datos de Ahorro de Combustible Los datos de ahorro de combustible son el resultado de las pruebas realizadas en el Laboratorio de Emisiones de Combustible y VehĂ­culos de la Agencia Nacional de ProtecciĂłn del Medio Ambiente en Ann Arbor, Michigan y por fabricantes de automĂłviles, con la supervisiĂłn de la EPA. Archivo Descargable de Ahorro de Combustible Archivo* de la GuĂ­a de Ahorremos Gasolina Archivo 2014 No Disponible Archivo 2013 de la GuĂ­a de Ahorremos Gasolina 2013 ĂŤcono de Adobe Acrobat Archivo 2012 de la GuĂ­a de Ahorremos Gasolina 2012 ĂŤcono de Adobe Acrobat Archivo 2011 de la GuĂ­a de Ahorremos Gasolina 2011 ĂŤcono de Adobe Acrobat Archivo 2010 de la GuĂ­a de Ahorremos Gasolina 2010 ĂŤcono de Adobe Acrobat Archivo 2009 de la GuĂ­a de Ahorremos Gasolina 2009 ĂŤcono de Adobe Acrobat

473

Corrosion performance of structural alloys for oxy-fuel combustion systems.  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Office of Fossil Energy is intensely promoting research and development of oxyfuel combustion systems that employ oxygen, instead of air, for burning the fuel. The resulting flue gas primarily consists of H{sub 2}O and CO{sub 2} that facilitates sequestration of CO{sub 2}, thereby leading to reduction in CO{sub 2} emissions. Also, as the oxidant is bereft of N{sub 2}, NO{sub x} emissions are minimized to a great extent from the exhaust gas. Studies at NETL have indicated that oxy-fuel combustion can increase efficiency in the power plants from the current 30-35% to 50-60%. However, the presence of H{sub 2}O/CO{sub 2} and trace constituents like nitrogen and sulfur in the environment at the operating temperatures and pressures can have adverse effects on the corrosion and mechanical properties of structural alloys. Thus, there is a critical need to evaluate the response of structural and turbine materials in simulated H{sub 2}O/CO{sub 2} environments in an effort to select materials that have adequate high temperature mechanical properties and environmental performance. During the past year, a program was initiated to evaluate the corrosion performance of structural alloys in CO{sub 2} and CO{sub 2}-steam environments at elevated temperatures. Materials selected for the study include intermediate-chromium ferritic steels, Fe-Cr-Ni heat-resistant alloys, and nickelbased superalloys. Coupon specimens of several of the alloys were exposed to pure CO{sub 2} at temperatures between 650 and 850C for times up to 1450 h. The corrosion tests in CO{sub 2}-50% steam environment was conducted at temperatures between 650 and 850C for times up to 1250 h. The steam for the experiment was generated by pumping distilled water and converting it to steam in the preheat portion of the furnace, ahead of the specimen exposure location. Preliminary results will be presented on weight change, scale thickness, internal penetration, and microstructural characteristics of corrosion products.

Natesan, K.; Rink, D. L.; Nuclear Engineering Division

2007-01-01T23:59:59.000Z

474

Effects of Fuel Injection Timing on Combustion and Emission Characteristics of a Diesel Engine Fueled with Diesel?Propane Blends  

Science Journals Connector (OSTI)

Effects of Fuel Injection Timing on Combustion and Emission Characteristics of a Diesel Engine Fueled with Diesel?Propane Blends ... State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China, and College of Vehicle & Motive Power Engineering, Henan University of Science and Technology, Luoyang, 471003, China ... It is the third most widely used vehicle fuel behind the gasoline and diesel fuels.1 Diesel fuel has been widely used in internal combustion engines due to its high thermal efficiency and low CO2 emission. ...

Zhihao Ma; Zuohua Huang; Chongxiao Li; Xinbin Wang; Haiyan Miao

2007-03-07T23:59:59.000Z

475

Effect of the Addition of Diglyme in Diesel Fuel on Combustion and Emissions in a Compression?Ignition Engine  

Science Journals Connector (OSTI)

In the application of pure oxygenated fuels, Fleisch et al.,1 Kapus et al.,2 and Sorenson et al.3 have studied dimethyl ether (DME) in the modified diesel engine, and their results showed that the engine could achieve ultralow emission prospects without fundamental changes in combustion systems. ... 16 Mitsuo et al.17 investigated the effects of DGM on engine exhaust emissions in three different diesel engines. ... (18)?Heywood, J. B. Internal Combustion Engine Fundamentals; McGraw-Hill Book Company, New York, 1988. ...

Yi Ren; Zuohua Huang; Haiyan Miao; Deming Jiang; Ke Zeng; Bing Liu; Xibin Wang

2007-07-17T23:59:59.000Z

476

Combustion Characteristics of Diesohol Using Biodiesel as an Additive in a Direct Injection Compression Ignition Engine under Various Compression Ratios  

Science Journals Connector (OSTI)

Studies on combustion characteristics are essential for the optimization of engine design with the use of alternative fuels as compression ignition (CI) engines are basically designed to operate with neat diesel. ... Fleisch et al.,(6) Kapus and Ofner,(7) and Sorenson and Mikkelsen(8) have studied the utilization of pure oxygenated fuels in diesel engines and found that they can achieve ultralow emissions without a fundamental change in the combustion system. ... Engines Research Laboratory in the Mechanical Engineering Department with modern computerized experimental facilities to the international standards. ...

V. Arul Mozhi Selvan; R. B. Anand; M. Udayakumar

2009-10-05T23:59:59.000Z

477

Understanding the thermodynamic inefficiencies in combustion processes  

Science Journals Connector (OSTI)

Abstract The thermodynamic inefficiencies associated with any energy conversion process are expressed by the exergy destruction and the exergy losses associated with the process. Combustion processes exhibit very high thermodynamic inefficiencies caused by chemical reaction, heat transfer, friction, and mixing. In this paper, we discuss how to estimate the thermodynamic inefficiencies resulting from each one of these sources. The thermodynamic evaluation can be conducted with the aid of either a conventional exergetic analysis or an advanced one. The latter allows estimation of the potential for improvement of the process being considered and demonstrates the interactions among the components of the system in which combustion takes place. The paper discusses how advanced exergy-based evaluations can be used to reduce the thermodynamic inefficiencies, costs, and environmental impacts associated with energy conversion systems including combustion processes.

George Tsatsaronis; Tatiana Morosuk; Daniela Koch; Max Sorgenfrei

2013-01-01T23:59:59.000Z

478

Premixed Combustion of Hydrogen Augmented Natural Gas  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Premixed Combustion of Hydrogen Premixed Combustion of Hydrogen Augmented Natural Gas * Lean premixed combustion * Effective for emission reduction with natural gas * High hydrogen flame speed requires care in premixer design for SGH fuels * UC Irvine study quantifies effectiveness of hydrogen augmentation strategy * Lean stability limit improves linearly with hydrogen augmentation * Emissions reduction can be achieved * Two OEM's and the California Energy Commission have used the results to help guide them on adapting to hydrogen fuel UC Irvine Scott Samuelsen / Vince McDonell Project 98-01-SR062 1200 1300 1400 1500 1600 1700 1800 1900 0 10 20 30 40 50 60 Hydrogen Volume in Main Fuel (%) Adiabatic Flame Temperature (K) P0(3/4) High Stability High Stability Low emission Low emission operational zone operational zone

479

Study of the potential valorization of metal contaminated Salix via phytoextraction by combustion  

E-Print Network [OSTI]

, different energy-recovery- techniques (incineration, combustion, gasification, pyrolysis, anaerobic

Paris-Sud XI, Université de

480

http://www.genie.uottawa.ca/~hallett/hallett.htm Combustion Research  

E-Print Network [OSTI]

Engineering Main themes: - solid fuel combustion/packed beds - liquid droplet combustion - biofuels (biomass, Mechanical Engineering #12;Liquid Droplet Combustion W. Hallett, Mechanical Engineering Recent Work - biomasshttp://www.genie.uottawa.ca/~hallett/hallett.htm Combustion Research W. Hallett, Mechanical

Hallett, William L.H.

Note: This page contains sample records for the topic "year internal combustion" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Hydrothermal combustion of biofuels in supercritical water  

SciTech Connect (OSTI)

Supercritical water oxidation (SCWO) has long been recognized as a safe, clean and energy efficient method for destroying a wide range of organic materials and hazardous wastes. As SCWO systems operate at elevated pressure, all effluent streams are fully contained allowing efficient recovery of thermal energy using compact heat exchangers. Water vapor produced by the combustion efficiency, especially for fuels with increasing moisture content such as biomass. This paper compares the performance of a simple Rankine vapor power cycle which derives it`s heat input from (1) a hydrothermal combustion system, and (2) a conventionally-fired steam boiler. The study is based on a hypothetical cellulose-based organic fuel with a higher heating value of 7,000 BT/1bm (dry). For a constant organic feedrate of 100 tons/day (bone dry) mixed in 20:80 fuel/water ratio with water, the calculated net electric power output from the 31.93%. Whereas, for an organic feedrate of 100 tons/day (bone dry) with zero of 5,382 kW, at an overall thermal efficiency of 31.48%. The hydrothermal combustion power cycle is unaffected by free moisture in the fuel, and thereby uniquely well-suited for use in biomass power generation applications. The hydrothermal combustion process is exceptionally clean burning, and allows full control over carbon dioxide and SOx emissions. NOx levels are inherently ultra-low due to lower combustion temperatures. Hydrothermal combustion technology is ready for pilot-scale engineering development and demonstration.

McGuinness, T.G. [Summit Research Corporation, Sante Fe, NM (United States); Marentis, R. [Summit Research Corporation, Allentown, PA (United States)

1994-12-31T23:59:59.000Z

482

Argonne TTRDC - Engines - Home - combustion, compression ignition,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

* Combustion Visualization * Combustion Visualization * Compression-Ignition * Emissions Control * Fuel Injection and Sprays * Idling * Multi-Dimensional Modeling * Particulate Matter * Spark Ignition Green Racing GREET Hybrid Electric Vehicles Hydrogen & Fuel Cells Materials Modeling, Simulation & Software Plug-In Hybrid Electric Vehicles PSAT Smart Grid Student Competitions Technology Analysis Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Engines Omnivorous engine tested by Thomas Wallner Thomas Wallner tests the omnivorous engine, a type of spark-ignition engine. Argonne's engine research is contributing to advances in technology that will impact the use of conventional and alternative fuels and the design of advanced technology vehicles. Compression Ignition

483

Building America Expert Meeting: Combustion Safety  

Broader source: Energy.gov (indexed) [DOE]

Meeting: Combustion Safety Meeting: Combustion Safety L. Brand Partnership for Advanced Residential Retrofit March 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply

484

Building America Expert Meeting: Combustion Safety  

Broader source: Energy.gov [DOE]

This expert meeting, The Best Approach to Combustion Safety in a Direct Vent World, was conducted by the Partnership for Advanced Residential Retrofit team on June 28, 2012, in San Antonio, TX. The objective of this Expert Meeting was to identify gaps and barriers that need to be addressed by future research, and to develop data-driven technical recommendations for code updates so that a common approach for combustion safety can be adopted by all members of the building energy efficiency and code communities.

485

Kinetic data base for combustion modeling  

SciTech Connect (OSTI)

The aim of this work is to develop a set of evaluated rate constants for use in the simulation of hydrocarbon combustion. The approach has been to begin with the small molecules and then introduce larger species with the various structural elements that can be found in all hydrocarbon fuels and decomposition products. Currently, the data base contains most of the species present in combustion systems with up to four carbon atoms. Thus, practically all the structural grouping found in aliphatic compounds have now been captured. The direction of future work is the addition of aromatic compounds to the data base.

Tsang, W.; Herron, J.T. [National Institute of Standards and Technology, Gaithersburg, MD (United States)

1993-12-01T23:59:59.000Z

486

Resonance ionization detection of combustion radicals  

SciTech Connect (OSTI)

Fundamental research on the combustion of halogenated organic compounds with emphasis on reaction pathways leading to the formation of chlorinated aromatic compounds and the development of continuous emission monitoring methods will assist in DOE efforts in the management and disposal of hazardous chemical wastes. Selective laser ionization techniques are used in this laboratory for the measurement of concentration profiles of radical intermediates in the combustion of chlorinated hydrocarbon flames. A new ultrasensitive detection technique, made possible with the advent of tunable VUV laser sources, enables the selective near-threshold photoionization of all radical intermediates in premixed hydrocarbon and chlorinated hydrocarbon flames.

Cool, T.A. [Cornell Univ., Ithaca, NY (United States)

1993-12-01T23:59:59.000Z

487

Evaluating the fluidized bed combustion options  

SciTech Connect (OSTI)

The proceedings from a conference on fluidized bed combustion are now available. The book discusses the immediate availability of atmospheric fluidized bed combustion technology as a practical, environmentally sound option for burning all grades of coal, wood, wood wastes, and biomass. The economics and technical fundamentals of atmospheric FBC are explained for the benefit of owners and managers of industrial boilers, boiler operators, architects/engineers, boiler manufacturers, and fuel suppliers. More than 15 FBC experts have contributed their expertise and experiences to the book.

Sheahan, R.T. (ed.)

1984-01-01T23:59:59.000Z

488

1 - Combustion processes of textile fibres  

Science Journals Connector (OSTI)

Abstract: This chapter reviews the current knowledge of the processes involved in the combustion behaviour of textiles and approaches to their flame retardant protection. Synthetic fibre-forming polymers, both thermoplastic and high temperature resistant, as well as naturally occurring fibre types are discussed. The combustion process is described with reference to the thermal stability, degradation and oxidative degradation of various individual polymer types. The significance of textile structure is considered with respect to the textile flammability. The mechanisms of the different flame retardant systems applied to various textiles are discussed as well as the more recent application of nano-composites. Finally, a prediction of potential future developments is presented.

D. Price; A.R. Horrocks

2013-01-01T23:59:59.000Z

489

Non-Petroleum Based Fuel Effects on Advanced Combustion (Agreement...  

Broader source: Energy.gov (indexed) [DOE]

Non-Petroleum Based Fuel Effects on Advanced Combustion (Agreement 13425) Non-Petroleum Based Fuel Effects on Advanced Combustion (Agreement 13425) Presentation from the U.S. DOE...

490

Conditions of realization of superwet in-situ combustion  

SciTech Connect (OSTI)

In in-situ combustion adding water to the air considerably improves the characteristics of the process: the combustible fuel concentration is reduced, the steam plateau ahead of the combustion front increases, less oxidizer is required to displace the oil, and the thermal wave has a higher propagation velocity. In wet combustion the temperature in the combustion zone reaches approx. 500/sup 0/C. In superwet combustion it depends on the reservoir pressure and may be 200-300/sup 0/C. It is not known in advance whether the heat of combustion will suffice to sustain the thermal wave, and if it does suffice, what will be the maximum values of the water-air ratio for the process. This paper attempts to construct a mathematical model of the superwet combustion process.

Bokserman, A.A.; Stepanov, V.P.

1985-07-01T23:59:59.000Z

491

A new type of self-organization in combustion  

Science Journals Connector (OSTI)

... a solid-phase gasless combustion3 which proceeds with the formation of a melt or a flameless gas3'4. ... gas3'4. Flameless combustion has recently been described for several tetrazole compounds5.

A. I. Lesnikovich; V. V. Sviridov; G. V. Printsev; O. A. Ivashkevich; P. N. Gaponik

1986-10-23T23:59:59.000Z

492

Large-Eddy Simulation of Swirling Pulverized-Coal Combustion  

Science Journals Connector (OSTI)

A Eulerian-Lagrangian large-eddy simulation (LES) with a Smagorinsky-Lilly sub-grid scale stress model, presumed-PDF fast chemistry and EBU gas combustion models, particle devolatilization and particle combustion

L. Y. Hu; L. X. Zhou; Y. H. Luo; C. S. Xu

2013-01-01T23:59:59.000Z

493

Carbonation of Fly Ash in Oxy-fuel CFB Combustion  

Science Journals Connector (OSTI)

Oxy-fuel combustion of fossil fuel is one of the most promising methods to produce a stream of concentrated CO2 ready for sequestration. Oxy-fuel FBC (fluidized bed combustion) can use limestone as a sorbent for

Chunbo Wang; Lufei Jia; Yewen Tan…

2007-01-01T23:59:59.000Z

494

A Comparison of Combustion and Emissions of Diesel Fuels and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

A Comparison of Combustion and Emissions of Diesel Fuels and Oxygenated Fuels in a Modern DI Diesel Engine A Comparison of Combustion and Emissions of Diesel Fuels and Oxygenated...

495

Advanced Combustion Systems Project Information | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FC26-07NT43088 Recovery Act: Oxy-combustion: Oxygen Transport Membrane Development Praxair, Inc. Completed Projects FE0009686 High Efficiency Molten-Bed Oxy-Coal Combustion...

496

COMBUSTION RESEARCH PROGRAM. CHAPTER FROM ENERGY & ENVIRONMENT ANNUAL REPORT 1977  

E-Print Network [OSTI]

The pulverized coal has significant ash content, about 6%.of Ash and Trace Metals from Pulverized Coal Combustion P.of Ash and Trace Metals from Pulverized Coal Combustion P.

Authors, Various

2011-01-01T23:59:59.000Z

497

MILD combustion for hydrogen and syngas at elevated pressures  

Science Journals Connector (OSTI)

As gas recirculation constitutes a fundamental condition for the realization of MILD combustion, it is necessary to determine gas recirculation ratio before designing MILD combustor. MILD combustion model with ga...

Mingming Huang; Zhedian Zhang; Weiwei Shao; Yan Xiong…

2014-02-01T23:59:59.000Z

498

Combustion of Low-Calorific Waste Biomass Syngas  

Science Journals Connector (OSTI)

The industrial combustion chamber designed for burning low-calorific syngas from gasification of waste biomass is presented. ... chips and turkey feathers the non-premixed turbulent combustion in the chamber is s...

Kamil Kwiatkowski; Marek Dudy?ski; Konrad Bajer

2013-12-01T23:59:59.000Z

499

The role played by self-inhibition in combustion processes  

Science Journals Connector (OSTI)

The absence of correlations between the heat of combustion of substances and substance combustion characteristics is shown to be caused by the special features of competition between reaction chain branching a...

V. V. Azatyan; I. A. Bolod’yan; Yu. N. Shebeko…

2006-04-01T23:59:59.000Z

500

Thermogravimetric analysis of co-combustion of biomass and biochar  

Science Journals Connector (OSTI)

The co-combustion of biomass and biochar was investigated by thermogravimetric analysis....R M...) for different blends were used to evaluate co-combustion features. As the biomass content increas...

Qiguo Yi; Fangjie Qi; Gong Cheng…

2013-06-01T23:59:59.000Z