National Library of Energy BETA

Sample records for yakama nation drop

  1. EA-1933: Yakama Nation Drop 4 Hydropower Project, Yakama Nation Reservation, WA

    Broader source: Energy.gov [DOE]

    DOE is a cooperating agency with the Department of the Interior's Bureau of Indian Affairs as a lead agency for the preparation of an EA to evaluate the potential environmental impacts of a proposal by the Confederated Tribes and Bands of the Yakama Nation Department of Natural Resources to install an inline turbine on the Wapato Irrigation Project (WIP) Main Canal to generate approximately one megawatt of supplemental hydroelectric power. The Main Canal is a non-fish bearing irrigation canal within the WIP water conveyance system. The project site is located two miles southwest of Harrah, Washington.

  2. Project Reports for Yakama Nation, Confederated Tribes and Bands - 2008

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project | Department of Energy Yakama Nation, Confederated Tribes and Bands - 2008 Project Project Reports for Yakama Nation, Confederated Tribes and Bands - 2008 Project It is the intention of the Yakama Nation (YN) to make improvements on the Wapato Irrigation Project (WIP) for the benefit of all stakeholders. Learn more about this project or find details in the below status reports. November 2008 status report (3.29 MB) November 2009 status report (8.95 MB) More Documents &

  3. Existing Homes Retrofit Case Study: Yakama Nation Housing Authority, Wapato, WA

    SciTech Connect (OSTI)

    2009-09-01

    This is a Building America fact sheet describing the Yakama Nation Housing Authority's retrofit of 25 homes on the reservation to make them more energy efficient.

  4. In a First, Yakama Indian Nation Teens Explore Tribal Sacred Areas at Hanford Site

    Broader source: Energy.gov [DOE]

    RICHLAND, Wash. – Yakama Indian Nation teenagers saw tribal sacred areas on the Hanford Site for the first time this month.

  5. Yakama Nation Housing Authority, Adams View: System Retrofit Research Report and Case Study Summary; 23 February 2004--15 January 2005

    SciTech Connect (OSTI)

    CARB

    2005-11-01

    The Yakama Nation is the largest tribe in the Pacific Northwest. The Yakama Nation Housing Authority (YNHA) is working to rehabilitate single family homes (two to four bedrooms) in its Adams View project using public and tax credit financing. It is in need of a major rehabilitation as a result of wear and tear after many years of use and overcrowding. The scope for the current CARB ''gut rehab'' project is 25 of the 40 homes in the Adams View development, but the proposed strategies could be replicated for the remaining 15 homes as well as for several other similar developments of the YNHA. On a larger scale, the system rehabilitation strategy developed for the Adam's View project should be replicable for most of the more than 4,300 housing units that were constructed in the Northwest (Washington, Oregon, and Idaho) under the US Department of Housing and Urban Development (HUD) Housing Act of 1937.

  6. Yakama Nation Hydropower Projects

    Office of Environmental Management (EM)

    independent, to reduce costs and enhance tribal ... budget for operation and maintenance comes from WIP ... Renewable Projects in Woody Biomass, Wind and Solar

  7. Yakama Nation - Wapato Hydropower Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    agreement includes a "right of first refusal" on all renewable energy development projects. ... kW or 8 to 50 kW * Manufacturer from Austria Project Objective (continued) * Hydro ...

  8. Little Boy Dropped on Hiroshima | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    | (NNSA) Little Boy Dropped on Hiroshima Little Boy Dropped on Hiroshima Hiroshima, Japan The gun model uranium bomb, called Little Boy, is dropped on Hiroshima, Japan

  9. Fat Man Dropped on Nagasaki | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Fat Man Dropped on Nagasaki August 09, 1945 Fat Man Dropped on Nagasaki Nagasaki, Japan The implosion model plutonium bomb, called Fat Man, is dropped on Nagasaki, Japan....

  10. Habitat Evaluation Procedures Report; Carl Property - Yakama Nation.

    SciTech Connect (OSTI)

    Ashley, Paul; Muse, Anthony

    2008-02-01

    A baseline habitat evaluation procedures (HEP) analysis was conducted on the Carl property (160 acres) in June 2007 to determine the number of habitat units to credit Bonneville Power Administration (BPA) for providing funds to acquire the property as partial mitigation for habitat losses associated with construction of McNary Dam. HEP surveys also helped assess the general ecological condition of the property. The Carl property appeared damaged from livestock grazing and exhibited a high percentage of invasive forbs. Exotic grasses, while present, did not comprise a large percentage of the available cover in most areas. Cover types were primarily grassland/shrubsteppe with a limited emergent vegetation component. Baseline HEP surveys generated 356.11 HUs or 2.2 HUs per acre. Habitat units were associated with the following HEP models: California quail (47.69 HUs), western meadowlark (114.78 HUs), mallard (131.93 HUs), Canada goose (60.34 HUs), and mink (1.38 HUs).

  11. Yakama Nation, Confederated Tribes and Bands- 2008 Project

    Broader source: Energy.gov [DOE]

    Council of Athabascan Tribal Governments (CATG) is a consortium of 10 Gwich'in and Koyukon Athabascan tribes located throughout the Yukon Flats.

  12. EA-1933: Finding of No Significant Impact | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Finding of No Significant Impact EA-1933: Finding of No Significant Impact Yakama Nation Drop 4 Hydropower Project, Yakama Nation Reservation, WA Based on the Final EA, DOE has...

  13. Yakama Power

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Because the Template focuses on non-tribal customers it uses jurisdictional language that might create confusion in the future in applying the Template to Indian tribes...

  14. Results of the Sandia National Laboratories MOSAIK cask drop test program

    SciTech Connect (OSTI)

    Sorenson, K.; Salzbrenner, R.; Wellman, G.; Bobbe, J.

    1991-01-01

    There has been a significant international effort over the past ten years to qualify structural materials for construction of radioactive material (RAM) transportation casks. As total life cycle cost analyses argue the necessity for more efficient casks, new candidate structural materials are evaluated relative to the historically accepted austenitic stainless steels. New candidate cask containment materials include ferritic steels, ductile iron, depleted uranium, and titanium. Another material, borated stainless steel is being considered for structural cask internals because of its neutron absorption properties. The mechanical performance of the borated stainless steels is a function of the boron content and metallurgical processing conditions. A separate paper in this symposium (Stephens et al. 1992) deals with the properties of a range of borated stainless steels. A major technical issue involved with the qualification of afl these candidate materials is that they may, under certain combinations of mechanical and environmental loading, fail in a brittle fashion. Such a failure would of course not be acceptable for a RAM transport cask involved in an accident. The cask designer must assure cask owners, regulators as well as the general public that the cask will not undergo brittle fracture for all regulatory loading conditions. This paper summarizes the drop tests that were conducted using the MOSAIK casks to verify the fracture mechanics cask design approach and to demonstrate that ductile iron could be subjected to severe loading conditions without failing in a brittle manner.

  15. Historical Significance Dropping

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Historical Significance Dropping the Ball NNSS is known for more than just nuclear past. NvE celebrates employees with picnics. U1a Facility, Icecap become testing grounds for unique physics experiments. See page 8. See page 4. NNSA Head Frank Klotz Visits NLV, NNSS Facilities On May 6, the National Nuclear Security Administration's new administrator Frank Klotz conducted an all-hands meeting with employees of the Nevada National Security Site (NNSS) and the National Nuclear Security

  16. CX-003191: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    91: Categorical Exclusion Determination CX-003191: Categorical Exclusion Determination Yakama Nation CX(s) Applied: A9, A11, B3.1 Date: 07/21/2010 Location(s): Harrah, Washington Office(s): Energy Efficiency and Renewable Energy Tribal Energy Program. The Yakama Nation Hydropower proposed project is for purchasing and installing a water turbine for Drop Site #4, located near Harrah, Washington, that would supplement the power generation for the Wapato Irrigation Project (WIP). Upon completion,

  17. The Great Marble Drop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Great Marble Drop Learning objective: for students to analyze a problem, and test and refine solutions. This will demonstrate a key skill needed in engineering and scientific...

  18. The Great Marble Drop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volunteers - Sign Up About Science Bowl Curriculum and Activities How to Build a Motor The Great Marble Drop How to Build a Turbine How to Build a Tower Classroom...

  19. Drum drop test report

    SciTech Connect (OSTI)

    McBeath, R.S.

    1995-02-28

    Testing was performed to determine actual damage to drums when dropped from higher than currently stacked elevations. The drum configurations were the same as they are placed in storage; single drums and four drums banded to a pallet. Maximum drop weights were selected based on successful preliminary tests. Material was lost from each of the single drum tests while only a small amount of material was lost from one of the pelletized drums. The test results are presented in this report. This report also provides recommendations for further testing to determine the appropriate drum weight which can be stored on a fourth tier.

  20. Drop Testing Representative Multi-Canister Overpacks

    SciTech Connect (OSTI)

    Snow, Spencer D.; Morton, Dana K.

    2015-06-01

    The objective of the work reported herein was to determine the ability of the Multi- Canister Overpack (MCO) canister design to maintain its containment boundary after an accidental drop event. Two test MCO canisters were assembled at Hanford, prepared for testing at the Idaho National Engineering and Environmental Laboratory (INEEL), drop tested at Sandia National Laboratories, and evaluated back at the INEEL. In addition to the actual testing efforts, finite element plastic analysis techniques were used to make both pre-test and post-test predictions of the test MCOs structural deformations. The completed effort has demonstrated that the canister design is capable of maintaining a 50 psig pressure boundary after drop testing. Based on helium leak testing methods, one test MCO was determined to have a leakage rate not greater than 1x10-5 std cc/sec (prior internal helium presence prevented a more rigorous test) and the remaining test MCO had a measured leakage rate less than 1x10-7 std cc/sec (i.e., a leaktight containment) after the drop test. The effort has also demonstrated the capability of finite element methods using plastic analysis techniques to accurately predict the structural deformations of canisters subjected to an accidental drop event.

  1. Watch Our CO2 Drop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Watch Our CO2 Drop Watch Our CO2 Drop

  2. 5-Carbon Alcohols for Drop-in Gasoline Replacement - Energy Innovation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fuels Biomass and Biofuels Biomass and Biofuels Find More Like This Return to Search 5-Carbon Alcohols for Drop-in Gasoline Replacement Lawrence Berkeley National Laboratory...

  3. Flow rate--pressure drop relation for deformable shallow microfluidic

    Office of Scientific and Technical Information (OSTI)

    channels (Conference) | SciTech Connect Conference: Flow rate--pressure drop relation for deformable shallow microfluidic channels Citation Details In-Document Search Title: Flow rate--pressure drop relation for deformable shallow microfluidic channels Authors: Christov, Ivan [1] ; Cognet, Vincent [2] ; Stone, Howard A [3] + Show Author Affiliations Los Alamos National Laboratory Ecole Normale Superieure de Cachan Mechanical & Aerospace Engineering, Princeton University Publication Date:

  4. Energy Innovator Drops Costs for Titanium Metalwork | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovator Drops Costs for Titanium Metalwork Energy Innovator Drops Costs for Titanium Metalwork March 13, 2012 - 12:42pm Addthis Michael Hess Michael Hess Former Digital Communications Specialist, Office of Public Affairs What are the key facts? Iowa Powder Atomization Technology is one of 36 companies that licensed technology under an agreement with the National Lab as part of the America's Next Top Energy Innovator program. Titanium is the stuff aircrafts are made of, at least the important

  5. Pure Drop Ltd | Open Energy Information

    Open Energy Info (EERE)

    Drop Ltd Jump to: navigation, search Name: Pure Drop Ltd Place: Israel Product: Developing a modular concentrated PV tracking system for electricity production, with a...

  6. Can Canister Containment Be Maintained After Accidental Drop Events?

    SciTech Connect (OSTI)

    D. K. Morton; S. D. Snow; T. E. Rahl; R. K. Blandford; T. J. Hill

    2006-05-01

    The National Spent Nuclear Fuel Program (NSNFP) has pursued a number of structural testing projects that are intended to provide data that can be used to substantiate the position that U. S. Department of Energy (DOE) spent nuclear fuel (SNF) canisters, made from austenitic stainless steels, can maintain containment after an accidental drop event and that plastic finite element methods can be used to accurately predict the structural response of canister configurations not specifically tested. In particular, drop tests of full-scale canisters and material impact testing at varying strain rates reflecting accidental drop conditions have been completed or are in progress. This paper provides insights to conclusions achieved to date and what efforts are planned to fully address the pertinent issues necessary to demonstrate the safety of DOE SNF canisters subjected to accidental drop events.

  7. Drop History? No! | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Drop History? No! Drop History? No! February 29, 2012 When I was in high school in England, especially in the smaller country schools, teachers were scarce and schedules, therefore, constrained. Further, the English style is for students to choose directions, and therefore subjects, at a relatively early age. So, at age 13, I had to choose between Physics and Chemistry on the one hand, and Latin and History on the other. Of course, I chose Physics and Chemistry, but thereby lost two subjects in

  8. Evaporation of multicomponent drop arrays

    SciTech Connect (OSTI)

    Annamalai, K.; Ryan, W.; Chandra, S. (Texas A M Univ., College Station, TX (United States))

    1993-08-01

    The present paper deals with the evaporation of multicomponent fuel droplets in an array using the recently developed point source method (PSM). First, the quasisteady (QS) evaporation of an isolated, multicomponent droplet is briefly analyzed. The resultant governing equations, along with Raoult's law and the Cox-Antoine relation, constitute the set of equations needed to arrive at the solutions for: (1) the droplet surface temperature, (2) the evaporation rate of each species, and (3) the vapor mass fraction of each species at the droplet surface. The PSM, which treats the droplet as a point mass source and heat sink, is then adopted to obtain an analytic expression for the evaporation rate of a multicomponent droplet in an array of liquid droplets. Defining the correction factor ([eta]) as a ratio of the evaporation of a drop in an array to the evaporation rate of a similar isolated multicomponent drop, an expression for the correction factor is obtained. The results of the point source method (PSM) are then compared with those obtained elsewhere for a three-drop array that uses the method of images (MOI). Excellent agreement is obtained. The treatment is then extended to a binary drop array to study the effect of interdrop spacing on vaporization. 20 refs., 11 figs., 4 tabs.

  9. Diesel prices see slight drop

    U.S. Energy Information Administration (EIA) Indexed Site

    Diesel prices see slight drop The U.S. average retail price for on-highway diesel fuel fell slightly to $3.91 a gallon on Monday. That's down 6-tenths of a penny from a week ago, based on the weekly price survey by the U.S. Energy Information Administration. Regionally, diesel prices were highest in New England at 4.06 a gallon, down half a penny from a week ago, followed closely by the West Coast states at 4.05 a gallon, up 2-tenths of a penny. Prices were lowest in the Gulf Coast region at

  10. Drop short control of electrode gap

    DOE Patents [OSTI]

    Fisher, Robert W.; Maroone, James P.; Tipping, Donald W.; Zanner, Frank J.

    1986-01-01

    During vacuum consumable arc remelting the electrode gap between a consumable electrode and a pool of molten metal is difficult to control. The present invention monitors drop shorts by detecting a decrease in the voltage between the consumable electrode and molten pool. The drop shorts and their associated voltage reductions occur as repetitive pulses which are closely correlated to the electrode gap. Thus, the method and apparatus of the present invention controls electrode gap based upon drop shorts detected from the monitored anode-cathode voltage. The number of drop shorts are accumulated, and each time the number of drop shorts reach a predetermined number, the average period between drop shorts is calculated from this predetermined number and the time in which this number is accumulated. This average drop short period is used in a drop short period electrode gap model which determines the actual electrode gap from the drop short. The actual electrode gap is then compared with a desired electrode gap which is selected to produce optimum operating conditions and the velocity of the consumable error is varied based upon the gap error. The consumable electrode is driven according to any prior art system at this velocity. In the preferred embodiment, a microprocessor system is utilized to perform the necessary calculations and further to monitor the duration of each drop short. If any drop short exceeds a preset duration period, the consumable electrode is rapidly retracted a predetermined distance to prevent bonding of the consumable electrode to the molten remelt.

  11. Magnetically focused liquid drop radiator

    DOE Patents [OSTI]

    Botts, Thomas E. (Fairfax, VA); Powell, James R. (Shoreham, NY); Lenard, Roger (Redondo Beach, CA)

    1986-01-01

    A magnetically focused liquid drop radiator for application in rejecting rgy from a spacecraft, characterized by a magnetizable liquid or slurry disposed in operative relationship within the liquid droplet generator and its fluid delivery system, in combination with magnetic means disposed in operative relationship around a liquid droplet collector of the LDR. The magnetic means are effective to focus streams of droplets directed from the generator toward the collector, thereby to assure that essentially all of the droplets are directed into the collector, even though some of the streams may be misdirected as they leave the generator. The magnetic focusing means is also effective to suppress splashing of liquid when the droplets impinge on the collector.

  12. Magnetically focused liquid drop radiator

    DOE Patents [OSTI]

    Botts, T.E.; Powell, J.R.; Lenard, R.

    1984-12-10

    A magnetically focused liquid drop radiator for application in rejecting energy from a spacecraft, characterized by a magnetizable liquid or slurry disposed in operative relationship within the liquid droplet generator and its fluid delivery system, in combination with magnetic means disposed in operative relationship around a liquid droplet collector of the LDR. The magnetic means are effective to focus streams of droplets directed from the generator toward the collector, thereby to assure that essentially all of the droplets are directed into the collector, even though some of the streams may be misdirected as they leave the generator. The magnetic focusing means is also effective to suppress splashing of liquid when the droplets impinge on the collector.

  13. NANOFLUIDICS REVOLUTION: PROTECTING THE WORLD ONE DROP AT A TIME (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Journal Article: NANOFLUIDICS REVOLUTION: PROTECTING THE WORLD ONE DROP AT A TIME Citation Details In-Document Search Title: NANOFLUIDICS REVOLUTION: PROTECTING THE WORLD ONE DROP AT A TIME Nanofluidics is a technology that involves the transport of very small liquid samples, on the order of micro- or pico-liters, confined to nanoscale structures. Scientists at the Savannah River National Laboratory (SRNL) in collaboration with the University of South Carolina are

  14. Simulation Approaches for Drop-in Biofuels | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biodiesel is a particularly promising biofuel due to its compatibility with the current ... alternate fuels for compression ignition engine applications," ICES2012-81078, ASME ...

  15. Towards predicting the voltage drop between electrode and electrolyte...

    Office of Scientific and Technical Information (OSTI)

    drop between electrode and electrolyte in lithium ion batteries. Citation Details In-Document Search Title: Towards predicting the voltage drop between electrode and electrolyte ...

  16. Microsoft Word - 2011_07_05_KHP Draft EIS.doc

    Office of Environmental Management (EM)

    National Marine Fisheries Service Bureau of Indian Affairs Washington Department of Fish and Wildlife Confederated Tribes and Bands of the Yakama Nation July 2011 Abstract -...

  17. Enforcement Letter, Argonne National Laboratory-West- February 9, 1999

    Broader source: Energy.gov [DOE]

    Issued to Argonne National Laboratory related to a Dropped Fuel Basket Assembly and Radiation Protection Program Deficiencies at Argonne National Laboratory-West

  18. I A STUDY OF THE WORKABILITY OF URANIUM BY MEANS OF TENSILE-IMPACT, HARDNESS, AND DROP-HAMMER

    Office of Legacy Management (LM)

    A STUDY OF THE WORKABILITY OF URANIUM BY MEANS OF TENSILE-IMPACT, HARDNESS, AND DROP-HAMMER I EVALUATIONS AT ELEVATED TEMPERATURES PROPOSAL TO NATIONAL LEAD COMPANY OF OHIO A STUDY OF THE WORKABILITY OF URANIUM BY MEANS OF TENSILE-IMPACT, HARDNESS, AND DROP-HAMMER EVALUATIONS AT ELEVATED TEMPERATURES PROPOSAL TO NATIONAL LEAD COMPANY OF OHIO Southern Research Institute Birmingham, Alabama January 30, 1963 Proposal No. 2152 Copy of original document Iccated in FEMP Archives. .L TABLEOFCONTENTS

  19. Ultrasonic characterization of single drops of liquids

    DOE Patents [OSTI]

    Sinha, Dipen N.

    1998-01-01

    Ultrasonic characterization of single drops of liquids. The present invention includes the use of two closely spaced transducers, or one transducer and a closely spaced reflector plate, to form an interferometer suitable for ultrasonic characterization of droplet-size and smaller samples without the need for a container. The droplet is held between the interferometer elements, whose distance apart may be adjusted, by surface tension. The surfaces of the interferometer elements may be readily cleansed by a stream of solvent followed by purified air when it is desired to change samples. A single drop of liquid is sufficient for high-quality measurement. Examples of samples which may be investigated using the apparatus and method of the present invention include biological specimens (tear drops; blood and other body fluid samples; samples from tumors, tissues, and organs; secretions from tissues and organs; snake and bee venom, etc.) for diagnostic evaluation, samples in forensic investigations, and detection of drugs in small quantities.

  20. B61-12 Life Extension Program Radar Drop Tests Completed Successfully |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | (NNSA) B61-12 Life Extension Program Radar Drop Tests Completed Successfully August 29, 2013 WASHINGTON, D.C. - As part of the ongoing effort to refurbish the aging B61 nuclear bomb without resorting to underground nuclear testing, two successful B61-12 radar drop tests were successfully completed at the Tonopah Test Range in Nevada on Aug. 14 and 15, 2013, by engineers from Sandia National Laboratories. Current B61s use decades-old vacuum tubes as

  1. Equation determines pressure drop in coiled tubing

    SciTech Connect (OSTI)

    Yang, Y.S.

    1995-12-04

    A single equation can determine the pressure drop in wells with laminar, transitional, and turbulent incompressible fluid flow in coiled tubing or other steel tubulars. The single equation is useful, especially in computer-aided design and operations. The equation is derived and illustrated by an example.

  2. Ultrasonic characterization of single drops of liquids

    DOE Patents [OSTI]

    Sinha, D.N.

    1998-04-14

    Ultrasonic characterization of single drops of liquids is disclosed. The present invention includes the use of two closely spaced transducers, or one transducer and a closely spaced reflector plate, to form an interferometer suitable for ultrasonic characterization of droplet-size and smaller samples without the need for a container. The droplet is held between the interferometer elements, whose distance apart may be adjusted, by surface tension. The surfaces of the interferometer elements may be readily cleansed by a stream of solvent followed by purified air when it is desired to change samples. A single drop of liquid is sufficient for high-quality measurement. Examples of samples which may be investigated using the apparatus and method of the present invention include biological specimens (tear drops; blood and other body fluid samples; samples from tumors, tissues, and organs; secretions from tissues and organs; snake and bee venom, etc.) for diagnostic evaluation, samples in forensic investigations, and detection of drugs in small quantities. 5 figs.

  3. EIS-0424: Klickitat Hatchery Complex Program, Washington | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Klickitat Hatchery and the Yakama Nation's Hatchery Complex Program that intend to aid populations of anadromous fish affected by the Federal Columbia River Power System dams. ...

  4. U.S. gasoline price expected to drop further below $3 per gallon

    U.S. Energy Information Administration (EIA) Indexed Site

    gasoline price expected to drop further below $3 per gallon The national average pump price of gasoline dropped below $3 per gallon last week for the first time in nearly four years. U.S. gasoline prices are expected to sink further below the $3 per gallon mark through the end of this year and average under $3 for the year in 2015. In its new short-term forecast, the U.S. Energy Information Administration said the average price for gasoline will continue to decline, reaching an average $2.80 per

  5. Variational optimization method for calculation of cloud drop growth in an Eulerian drop-size framework

    SciTech Connect (OSTI)

    Liu, Qingfu; Kogan, Y.L.; Lilly, D.K.; Khairoutdinov, M.P.

    1997-10-15

    A variational optimization (VO) method that requires specification of only one variable in each bin size for condensation and evaporation calculations in an Eulerian drop-size framework is proposed. The method is tested against the exact solution given by the Lagrangian method using more than 15000 spectra selected from experiments with a three-dimensional large eddy simulation model with explicit microphysics. The results show that the VO method not only conserves the integral parameters of the spectrum, such as drop number, mean radius, liquid water content, and the effective radius, but also provides an accurate calculation of the spectrum itself.

  6. Load drop evaluation for TWRS FSAR

    SciTech Connect (OSTI)

    Julyk, L.J.; Ralston, G.L.

    1996-09-30

    Operational or remediation activities associated with existing underground high-level waste storage tank structures at the Hanford Site often require the installation/removal of various equipment items. To gain tank access for installation or removal of this equipment, large concrete cover blocks must be removed and reinstalled in existing concrete pits above the tanks. An accidental drop of the equipment or cover blocks while being moved over the tanks that results in the release of contaminants to the air poses a potential risk to onsite workers or to the offsite public. To minimize this potential risk, the use of critical lift hoisting and rigging procedures and restrictions on lift height are being considered during development of the new tank farm Basis for Interim Operation and Final Safety Analysis Report. The analysis contained herein provides information for selecting the appropriate lift height restrictions for these activities.

  7. Method for reducing pressure drop through filters, and filter exhibiting reduced pressure drop

    DOE Patents [OSTI]

    Sappok, Alexander; Wong, Victor

    2014-11-18

    Methods for generating and applying coatings to filters with porous material in order to reduce large pressure drop increases as material accumulates in a filter, as well as the filter exhibiting reduced and/or more uniform pressure drop. The filter can be a diesel particulate trap for removing particulate matter such as soot from the exhaust of a diesel engine. Porous material such as ash is loaded on the surface of the substrate or filter walls, such as by coating, depositing, distributing or layering the porous material along the channel walls of the filter in an amount effective for minimizing or preventing depth filtration during use of the filter. Efficient filtration at acceptable flow rates is achieved.

  8. How Voltage Drops are Manifested by Lithium Ion Configurations...

    Office of Scientific and Technical Information (OSTI)

    Title: How Voltage Drops are Manifested by Lithium Ion Configurations at Interfaces and in ... Subject: bio-inspired, energy storage (including batteries and capacitors), defects, ...

  9. Advanced Drop-In Biofuels Initiative Agenda | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Agenda for the Advanced Drop-In Biofuels Initiative Industry Roundtable industryroundtableagenda.pdf (430.67 KB) More Documents & Publications Department of the Navy, DPA ...

  10. Eliminate Excessive In-Plant Distribution System Voltage Drops

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excessive In-Plant Distribution System Voltage Drops Studies indicate that in-plant electrical distribution system losses-due to voltage unbalance, over- and undervoltage, low ...

  11. Delayed Frost Growth on Jumping-Drop Superhydrophobic Surfaces...

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Search Results Journal Article: Delayed Frost Growth on Jumping-Drop Superhydrophobic Surfaces Citation ... Here, we report that subcooled condensate on a chilled ...

  12. Conserving Water, One Drop at a Time | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conserving Water, One Drop at a Time Conserving Water, One Drop at a Time May 27, 2015 - 4:05pm Q&A What are you doing to conserve water? Tell us Addthis Every drop counts! Make sure you are doing your part to save water. | Photos courtesy of Jason Flakes, U.S. Department of Energy Every drop counts! Make sure you are doing your part to save water. | Photos courtesy of Jason Flakes, U.S. Department of Energy Christina Stowers Communications Specialist in the Weatherization and

  13. Court decision dropping toxic substance rules stands

    SciTech Connect (OSTI)

    Bryant, C.R.

    1993-06-01

    In a somewhat surprising move, the U.S. Department of Labor has decided not to appeal a court decision essentially dropping regulations established by the Occupational Safety and Health Administration (OSHA) for about 400 hazardous substances. The decision leaves unregulated or subject to reduced standards substances that range from carbon monoxide to perchloroethylene. The Labor Department had until March 22, 1993, to appeal the court decision. On July 8, 1992, the U.S. Court of Appeals for the 11th Circuit overturned OSHA's final Air Contaminants Standard, which was promulgated in 1989. The standard established permissible exposure limits (PELs) for 428 toxic substances. In AFL-CIO vs. OSHA, the Court ruled that OSHA failed to make a separate scientific case for evaluating health risks of each chemical. Because of the decision not to appeal, PELs for more than half of the substances regulated by OSHA now are removed from the books or revert to the voluntary industry standards adopted by OSHA in 1970 and in force prior to the 1989 final rule.

  14. STRESS CORROSION CRACKING IN TEAR DROP SPECIMENS

    SciTech Connect (OSTI)

    Lam, P; Philip Zapp, P; Jonathan Duffey, J; Kerry Dunn, K

    2009-05-01

    Laboratory tests were conducted to investigate the stress corrosion cracking (SCC) of 304L stainless steel used to construct the containment vessels for the storage of plutonium-bearing materials. The tear drop corrosion specimens each with an autogenous weld in the center were placed in contact with moist plutonium oxide and chloride salt mixtures. Cracking was found in two of the specimens in the heat affected zone (HAZ) at the apex area. Finite element analysis was performed to simulate the specimen fabrication for determining the internal stress which caused SCC to occur. It was found that the tensile stress at the crack initiation site was about 30% lower than the highest stress which had been shifted to the shoulders of the specimen due to the specimen fabrication process. This finding appears to indicate that the SCC initiation took place in favor of the possibly weaker weld/base metal interface at a sufficiently high level of background stress. The base material, even subject to a higher tensile stress, was not cracked. The relieving of tensile stress due to SCC initiation and growth in the HAZ and the weld might have foreclosed the potential for cracking at the specimen shoulders where higher stress was found.

  15. Notice of Intent to Investigate, Los Alamos National Security...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Charles F. McMillan, President Los Alamos National Security, LLC Los Alamos National Laboratory Mailstop A 100, Drop Point 03140071S Bikini Atoll Road, TA-3 Los Alamos, New Mexico ...

  16. Method and apparatus for producing drops using a drop-on-demand dispenser

    DOE Patents [OSTI]

    Chen, Alvin U.; Basaran, Osman A.

    2003-01-01

    A method and apparatus for dispensing fluid from a drop-on-demand (DOD) fluid dispenser. The method involves withdrawing fluid in the dispenser for a first duration of time, followed by a second duration of time during which the fluid is propelled toward the orifice of the dispenser. Following the period during which the fluid is propelled, there is a second withdrawing of the fluid into the dispenser. The duration of the propelling period is shorter than the duration of either the first withdrawing or the second withdrawing. The propelling of the fluid results in the extension of a small tongue of fluid from the meniscus of the fluid. The second withdrawing of the fluid results in a retraction of the meniscus into the passageway such that only the small tongue of fluid separates and is ejected from the dispenser.

  17. Origin and dynamics of vortex rings in drop splashing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lee, Ji San; Park, Su Ji; Lee, Jun Ho; Weon, Byung Mook; Fezzaa, Kamel; Je, Jung Ho

    2015-09-04

    A vortex is a flow phenomenon that is very commonly observed in nature. More than a century, a vortex ring that forms during drop splashing has caught the attention of many scientists due to its importance in understanding fluid mixing and mass transport processes. However, the origin of the vortices and their dynamics remain unclear, mostly due to the lack of appropriate visualization methods. Here, with ultrafast X-ray phase-contrast imaging, we show that the formation of vortex rings originates from the energy transfer by capillary waves generated at the moment of the drop impact. Interestingly, we find a row ofmore » vortex rings along the drop wall, as demonstrated by a phase diagram established here, with different power-law dependencies of the angular velocities on the Reynolds number. These results provide important insight that allows understanding and modelling any type of vortex rings in nature, beyond just vortex rings during drop splashing.« less

  18. Origin and dynamics of vortex rings in drop splashing

    SciTech Connect (OSTI)

    Lee, Ji San; Park, Su Ji; Lee, Jun Ho; Weon, Byung Mook; Fezzaa, Kamel; Je, Jung Ho

    2015-09-04

    A vortex is a flow phenomenon that is very commonly observed in nature. More than a century, a vortex ring that forms during drop splashing has caught the attention of many scientists due to its importance in understanding fluid mixing and mass transport processes. However, the origin of the vortices and their dynamics remain unclear, mostly due to the lack of appropriate visualization methods. Here, with ultrafast X-ray phase-contrast imaging, we show that the formation of vortex rings originates from the energy transfer by capillary waves generated at the moment of the drop impact. Interestingly, we find a row of vortex rings along the drop wall, as demonstrated by a phase diagram established here, with different power-law dependencies of the angular velocities on the Reynolds number. These results provide important insight that allows understanding and modelling any type of vortex rings in nature, beyond just vortex rings during drop splashing.

  19. Meso-scale controlled motion for a microfluidic drop ejector...

    Office of Scientific and Technical Information (OSTI)

    drops at 10 ms, (2) packaging--a compact ejector package based on a modified EMDIP (Electro-Microfluidic Dual In-line Package--SAND2002-1941) was fabricated, and (3) a vision...

  20. NREL: Biomass Research - Discovering Drop-In Biofuels to Leverage...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    drop-in fuels that are compatible with existing engines and fuel distribution. Biomass feedstocks such as crop residues and algae are available on a scale that other renewable...

  1. Instantaneous Leakage Evaluation of Metal Cask at Drop Impact

    SciTech Connect (OSTI)

    Hirofumi Takeda; Norihiro Kageyama; Masumi Wataru; Ryoji Sonobe; Koji Shirai; Toshiari Saegusa

    2006-07-01

    There have been a lot of tests and analyses reported for evaluation of drop tests of metal casks. However, no quantitative measurement has ever been made for any instantaneous leakage through metal gaskets during the drop tests due to loosening of the bolts in the containments and lateral sliding of the lids. In order to determine a source term for radiation exposure dose assessment, it is necessary to obtain fundamental data of instantaneous leakage. In this study, leak tests were performed by using scale models of the lid structure and a full scale cask without impact limiters simulating drop accidents in a storage facility, with aim of measuring and evaluating any instantaneous leakage at drop impact. Prior to drop tests of a full scale metal cask, a series of leakage tests using scale models were carried out to establish the measurement method and to examine a relationship between the amount of the lateral sliding of the lid and the leak rate. It was determined that the leak rate did not depend on the lateral sliding speeds. Drop tests of a full scale metal cask without impact limiters were carried out by simulating drop accidents during handling in a storage facility. The target was designed to simulate a reinforced concrete floor in the facility. The first test was a horizontal drop from a height of 1 m. The second test simulated a rotational impact around an axis of a lower trunnion of the cask from the horizontal status at a height of 1 m. In the horizontal drop test, the amount of helium gas leakage was calculated by integrating the leak rate with time. The total amount of helium gas leakage from the primary and secondary lids was 1.99 x 10{sup -6} Pa.m{sup 3}. This value is 9.61 x 10{sup -9}% of the initially installed helium gas. The amount of leakage was insignificant. In the rotational drop test, the total amount of leakage from the primary and secondary lids was 1.74 x 10{sup -5} Pa.m{sup 3}. This value is 8.45 x 10{sup -8}% of the initially installed

  2. Interactions between drops of molten Al-Li alloys and liquid water

    SciTech Connect (OSTI)

    Hyder, M.L.; Nelson, L.S.; Duda, P.M.; Hyndman, D.A.

    1993-08-01

    Sandia National Laboratories, at the request of the Savannah River Technology Center (SRTC), studied the interactions between single drops of molten aluminum-lithium alloys and water. Most experiments were performed with ``B`` alloy (3.1 w/o Li, balance A1). Objectives were to develop experimental procedures for preparing and delivering the melt drops and diagnostics for characterizing the interactions, measure hydrogen generated by the reaction between melt and water, examine debris recovered after the interaction, determine changes in the aqueous phase produced by the melt-water chemical reactions, and determine whether steam explosions occur spontaneously under the conditions studied. Although many H{sub 2} bubbles were generated after the drops entered the water, spontaneous steam explosions never occurred when globules of the ``B`` alloy at temperatures between 700 and 1000C fell freely through water at room temperature, or upon or during subsequent contact with submerged aluminum or stainless steel surfaces. Total amounts of H{sub 2} (STP) increased from about 2 to 9 cm{sup 3}/per gram of melt as initial melt temperature increased over this range of temperatures.

  3. A little drop will do it: Tiny grains of lithium can dramatically improve

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the performance of fusion plasmas | Princeton Plasma Physics Lab A little drop will do it: Tiny grains of lithium can dramatically improve the performance of fusion plasmas By Raphael Rosen May 22, 2015 Tweet Widget Google Plus One Share on Facebook Left: DIII-D tokamak. Right: Cross-section of plasma in which lithium has turned the emitted light green. (Credits: Left, General Atomics / Right, Steve Allen, Lawrence Livermore National Laboratory) Left: DIII-D tokamak. Right: Cross-section of

  4. A little drop will do it: Tiny grains of lithium can dramatically improve

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the performance of fusion plasmas | Princeton Plasma Physics Lab A little drop will do it: Tiny grains of lithium can dramatically improve the performance of fusion plasmas By Raphael Rosen May 22, 2015 Tweet Widget Google Plus One Share on Facebook Left: DIII-D tokamak. Right, Cross-section of plasma in which lithium has turned the emitted light green. (Credits: Left, General Atomics / Right: Steve Allen, Lawrence Livermore National Laboratory) Left: DIII-D tokamak. Right, Cross-section of

  5. 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station December 16, 2013 - ...

  6. A new method for measurement of safety rod drop times

    SciTech Connect (OSTI)

    Pesic, M.; Stefanovic, D. ); Marinkovic, P. )

    1992-10-01

    In this paper, a new method for the accurate measurement of safety rod drop times is proposed. It is based on a fast electromagnetic transducer and an analog-to-digital converter (ADC) conected to a computer system. Evaluation of recorded data is conducted by a developed computer code. The first measurements performed at the HERBE fast-thermal RB reactor show that a relative uncertainty (confidence level 95%) of less than 6% can be achieved in determination of rod drop time (with time intervals ranging from 0.4-10.0 s). Further improvements in accuracy are possible.

  7. Watch Our CO2 Drop | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Our CO2 Drop Watch Our CO2 Drop January 14, 2016 - 4:55pm Addthis Daniel Wood Daniel Wood Data Visualization and Cartographic Specialist, Office of Public Affairs Learn More About Climate Change If you want to learn more about the importance of reducing our carbon pollution, read our recent report about how climate change threatens our energy infrastructure. Curious about the total amount of carbon we emit into the atmosphere? Compare countries from around the globe using this tool. On Tuesday,

  8. Electrostatic attraction of charged drops of water inside dropwise cluster

    SciTech Connect (OSTI)

    Shavlov, A. V.; Tyumen State Oil and Gas University, 38, Volodarskogo Str., Tyumen 625000 ; Dzhumandzhi, V. A.

    2013-08-15

    Based on the analytical solution of the Poisson-Boltzmann equation, we demonstrate that inside the electrically neutral system of charges an electrostatic attraction can occur between the like-charged particles, where charge Z ? 1 (in terms of elementary charge) and radius R > 0, whereas according to the literature, only repulsion is possible inside non-electrically neutral systems. We calculate the free energy of the charged particles of water inside a cluster and demonstrate that its minimum is when the interdroplet distance equals several Debye radii defined based on the light plasma component. The deepest minimum depth is in a cluster with close spatial packing of drops by type, in a face-centered cubic lattice, if almost all the electric charge of one sign is concentrated on the drops and that of the other sign is concentrated on the light compensation carriers of charge, where the charge moved by equilibrium carriers is rather small.

  9. Surface tension of spherical drops from surface of tension

    SciTech Connect (OSTI)

    Homman, A.-A.; Bourasseau, E.; Malfreyt, P.; Strafella, L.; Ghoufi, A.

    2014-01-21

    The determination of surface tension of curved interfaces is a topic that raised many controversies during the last century. Explicit liquid-vapor interface modelling (ELVI) was unable up to now to reproduce interfacial behaviors in drops due to ambiguities in the mechanical definition of the surface tension. In this work, we propose a thermodynamic approach based on the location of surface of tension and its use in the Laplace equation to extract the surface tension of spherical interfaces from ELVI modelling.

  10. Sessile drop studies on polybromide/zinc-bromine battery electrolyte

    SciTech Connect (OSTI)

    Kinoshita, K.; Leach, S.C.

    1982-08-01

    Improvements in the performance of zinc-bromine batteries have been observed with electrolytes containing a quaternary ammonium salt that complexes the bromine to reduce the concentration of free bromine in solution. A variety of quaternary ammonium salts that complex bromine to form a so-called polybromide oil have been considered. Various papers have discussed measurements of the physicochemical properties of the two-component system of bromine-quaternary ammonium bromide in an aqueous medium. The purpose of this paper is to investigate the interfacial tension of polybromide oils on the electrolytes for zinc-bromine batteries by reporting a study of the interfacial tension and contact angle of polybromide oil drops in which the sessile drop method is used. The interfacial tensions for the polybromide phases are found to be considerably lower than the values commonly reported for two-phase systems containing organic and aqueous phases. However, several two-phase systems, such as benzyl alcohol/water, furfural/water, and ethyl acetate/water have low interfacial tension comparable to that of the polybromide/electrolyte system. The low interfacial tension of the polybromide oil phase has important practical implications for the zinc-bromine battery. A stable emulsion can be produced very readily; small drops of the polybromide-oil phase can thus be stabilized with the electrolyte phase and can be expected to enhance the mass transfer of bromine from the polybromide to the electrode.

  11. Seismic II over I Drop Test Program results and interpretation

    SciTech Connect (OSTI)

    Thomas, B.

    1993-03-01

    The consequences of non-seismically qualified (Category 2) objects falling and striking essential seismically qualified (Category 1) objects has always been a significant, yet analytically difficult problem, particularly in evaluating the potential damage to equipment that may result from earthquakes. Analytical solutions for impact problems are conservative and available for mostly simple configurations. In a nuclear facility, the [open quotes]sources[close quotes] and [open quotes]targets[close quotes] requiring evaluation are frequently irregular in shape and configuration, making calculations and computer modeling difficult. Few industry or regulatory rules are available on this topic even though it is a source of considerable construction upgrade costs. A drop test program was recently conducted to develop a more accurate understanding of the consequences of seismic interactions. The resulting data can be used as a means to improve the judgment of seismic qualification engineers performing interaction evaluations and to develop realistic design criteria for seismic interactions. Impact tests on various combinations of sources and targets commonly found in one Savannah River Site (SRS) nuclear facility were performed by dropping the sources from various heights onto the targets. This report summarizes results of the Drop Test Program. Force and acceleration time history data are presented as well as general observations on the overall ruggedness of various targets when subjected to impacts from different types of sources.

  12. Seismic II over I Drop Test Program results and interpretation

    SciTech Connect (OSTI)

    Thomas, B.

    1993-03-01

    The consequences of non-seismically qualified (Category 2) objects falling and striking essential seismically qualified (Category 1) objects has always been a significant, yet analytically difficult problem, particularly in evaluating the potential damage to equipment that may result from earthquakes. Analytical solutions for impact problems are conservative and available for mostly simple configurations. In a nuclear facility, the {open_quotes}sources{close_quotes} and {open_quotes}targets{close_quotes} requiring evaluation are frequently irregular in shape and configuration, making calculations and computer modeling difficult. Few industry or regulatory rules are available on this topic even though it is a source of considerable construction upgrade costs. A drop test program was recently conducted to develop a more accurate understanding of the consequences of seismic interactions. The resulting data can be used as a means to improve the judgment of seismic qualification engineers performing interaction evaluations and to develop realistic design criteria for seismic interactions. Impact tests on various combinations of sources and targets commonly found in one Savannah River Site (SRS) nuclear facility were performed by dropping the sources from various heights onto the targets. This report summarizes results of the Drop Test Program. Force and acceleration time history data are presented as well as general observations on the overall ruggedness of various targets when subjected to impacts from different types of sources.

  13. Adiabatic two-phase frictional pressure drops in microchannels

    SciTech Connect (OSTI)

    Revellin, Remi; Thome, John R. [EPFL, STI ISE LTCM, ME Gl 464, Station 9, CH-1015 Lausanne (Switzerland)

    2007-07-15

    Two-phase pressure drops were measured over a wide range of experimental test conditions in two sizes of microchannels (sight glass tubes 0.509 and 0.790 mm) for two refrigerants (R-134a and R-245fa). Similar to the classic Moody diagram in single-phase flow, three zones were distinguishable when plotting the variation of the two-phase friction factor versus the two-phase Reynolds number: a laminar regime for Re{sub TP} < 2000, a transition regime for 2000 {<=} Re{sub TP} < 8000 and a turbulent regime for Re{sub TP} {>=} 8000. The laminar zone yields a much sharper gradient than in single-phase flow. The transition regime is not predicted well by any of the prediction methods for two-phase frictional pressure drops available in the literature. This is not unexpected since only a few data are available for this region in the literature and most methods ignore this regime, jumping directly from laminar to turbulent flow at Re{sub TP} = 2000. The turbulent zone is best predicted by the Mueller-Steinhagen and Heck correlation. Also, a new homogeneous two-phase frictional pressure drop has been proposed here with a limited range of application. (author)

  14. Optical add/drop filter for wavelength division multiplexed systems

    DOE Patents [OSTI]

    Deri, Robert J.; Strand, Oliver T.; Garrett, Henry E.

    2002-01-01

    An optical add/drop filter for wavelength division multiplexed systems and construction methods are disclosed. The add/drop filter includes a first ferrule having a first pre-formed opening for receiving a first optical fiber; an interference filter oriented to pass a first set of wavelengths along the first optical fiber and reflect a second set of wavelengths; and, a second ferrule having a second pre-formed opening for receiving the second optical fiber, and the reflected second set of wavelengths. A method for constructing the optical add/drop filter consists of the steps of forming a first set of openings in a first ferrule; inserting a first set of optical fibers into the first set of openings; forming a first set of guide pin openings in the first ferrule; dividing the first ferrule into a first ferrule portion and a second ferrule portion; forming an interference filter on the first ferrule portion; inserting guide pins through the first set of guide pin openings in the first ferrule portion and second ferrule portion to passively align the first set of optical fibers; removing material such that light reflected from the interference filter from the first set of optical fibers is accessible; forming a second set of openings in a second ferrule; inserting a second set of optical fibers into the second set of openings; and positioning the second ferrule with respect to the first ferrule such that the second set of optical fibers receive the light reflected from the interference filter.

  15. LLNL small-scale drop-hammer impact sensitivity test (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: LLNL small-scale drop-hammer impact sensitivity test Citation Details In-Document Search Title: LLNL small-scale drop-hammer impact sensitivity test You are ...

  16. UCRL-ID-119665 LLNL Small-Scale Drop-Hammer Impact Sensitivity...

    Office of Scientific and Technical Information (OSTI)

    UCRL-ID-119665 LLNL Small-Scale Drop-Hammer Impact Sensitivity Test L. Richard Simpson M. ... LLNL Small-Scale Drop-Hammer Impact Sensitivity Test L. Richard Simpson, and M. Frances ...

  17. Bulk Fuel Procurement Process & Alternative Drop-in Fuel | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Bulk Fuel Procurement Process & Alternative Drop-in Fuel Bulk Fuel Procurement Process & Alternative Drop-in Fuel Jeanne Binder, DLA Energy, presentation on Bulk Fuel Procurement Process & Alternative Drop-in Fuel at the Advanced Biofuels Industry Roundtable. 7_binder_roundtable.pdf (1.17 MB) More Documents & Publications DLA Energy: Your Supplemental Energy Contracting Venue Advanced Drop-In Biofuels Initiative Agenda FUPWG Spring 2015 Agenda and Presentations

  18. How low can you go? Low pressure drop laboratory design

    SciTech Connect (OSTI)

    Weale, John; Rumsey, Peter; Sartor, Dale; Lock, Lee Eng

    2001-12-01

    Laboratory buildings are characterized by the production of potentially hazardous fumes within the occupied space. The primary objective of a laboratory ventilation system is to isolate and protect the occupants from the fumes, as well as provide minimum outside air at a comfortable temperature. Fume removal results in the need for a large volume of conditioned make-up air, typically a significantly greater volume than required for space temperature conditioning purposes. The high quantity of exhaust naturally results in a once through system, which is also often required by codes that prohibit any recirculation in a laboratory space. The high costs associated with high airflow systems are magnified by the 24 hours a day, 356 days a year ventilation operation often seen in laboratory situations. All too often, the common design approach taken to laboratory mechanical systems results in a traditional office ventilation system upsized to meet a laboratory's requirements. Recognizing the unique aspects of laboratory requirements and operation is essential to optimizing the mechanical system. Figure 1 shows a breakdown of a laboratory building's electricity use, based on a DOE 2 model of a baseline laboratory building design for Montana State University (Bozeman, MT). In laboratory buildings, the largest and easiest target for energy use reduction is usually the ventilation energy. At about 50 percent of the buildings total electricity usage, a 15 percent reduction in the power required by the ventilation system would save more energy than eliminating all lighting energy. As the largest component of a laboratory's energy consumption, the ventilation system is the first target to reduce the energy bill. Significantly improving the standard design efficiency of a ventilation system requires a lower air pressure drop system on both the supply and exhaust system. Implementing low-pressure drop design strategies from the early stages of the design process will result in

  19. Final Meeting Summary Page 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... DOE-RL Alicia Boyd, Ecology Alex Nazarali, CTUIR Alex Teimouri, DOE-RL Dib Goswami, Ecology Dave Rowland, Yakama Nation Hillary Johnson, EnviroIssues Brett Watson, EnviroIssues

  20. EA-1959: Eightmile Ranch Coho Acclimation Site, Okanogan County...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    proved infeasible, so the Yakama Nation is proposing a new site at Eightmile Ranch. Young coho would be held in the pond from March to May and then released into the Chewuch...

  1. EIS-0265-SA-167: Supplement Analysis | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    project with the Yakama Nation. The goal of this project is to restore salmonid habitat through a series of alluvial meadows along the mainstem of the Klickitat River from...

  2. EA-1998: Upper Columbia Spring Chinook and Steelhead Acclimation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BPA is preparing an EA that will analyze the potential impacts of a proposal to fund the Yakama Nation to improve, develop, and use fish rearing acclimation ponds for hatchery ...

  3. CX-009699: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Continuation of Yakama Nation Sturgeon Management Project CX(s) Applied: B1.20 Date: 12/27/2012 Location(s): Washington, Washington Offices(s): Bonneville Power Administration

  4. Head of EM Visits Northwest Tribes

    Broader source: Energy.gov [DOE]

    EM Acting Assistant Secretary Mark Whitney recently traveled to Idaho, Oregon, and Washington to visit the Confederated Tribes and Bands of the Yakama Nation, Wanapum Band, Confederated Tribes of the Umatilla Indian Reservation, and Nez Perce Tribe.

  5. EA-1111: K Pool Fish Rearing, Hanford Site, Richland, Washington

    Broader source: Energy.gov [DOE]

    This EA evaluates the environmental impacts of the proposal to enter into a use permit or lease agreement with the Yakama Indian Nation or other parties who would rear fish in the 100-K Area Pools.

  6. EIS-0522: Notice of Intent | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: Notice of Intent EIS-0522: Notice of Intent Melvin R. Sampson Hatchery, Yakima Basin Coho Project; Kittitas County, Washington The Bonneville Power Administration (BPA) issued a notice of intent to prepare an EIS that analyzes the potential environmental impacts of constructing and operating a proposed hatchery for coho salmon. BPA's proposed action is to fund the Confederated Tribes of the Yakama Nation construction of a hatchery on 50 acres of land owned by the Yakama Nation in Kittitas

  7. Total number of longwall faces drops below 50

    SciTech Connect (OSTI)

    Fiscor, S.

    2009-02-15

    For the first time since Coal Age began its annual Longwall Census the number of faces has dropped below 50. A total of five mines operate two longwall faces. CONSOL Energy remains the leader with 12 faces. Arch Coal operates five longwall mines; Robert E. Murray owns five longwall mines. West Virginia has 13 longwalls, followed by Pennsylvania (8), Utah (6) and Alabama (6). A detailed table gives for each longwall installation, the ownership, seam height, cutting height, panel width and length, overburden, number of gate entries, depth of cut, model of equipment used (shearer, haulage system, roof support, face conveyor, stage loader, crusher, electrical controls and voltage to face). 2 tabs., 1 photo.

  8. HLW Canister and Can-In-Canister Drop Calculation

    SciTech Connect (OSTI)

    H. Marr

    1999-09-15

    The purpose of this calculation is to evaluate the structural response of the standard high-level waste (HLW) canister and the HLW canister containing the cans of immobilized plutonium (''can-in-canister'' throughout this document) to the drop event during the handling operation. The objective of the calculation is to provide the structure parameter information to support the canister design and the waste handling facility design. Finite element solution is performed using the commercially available ANSYS Version (V) 5.4 finite element code. Two-dimensional (2-D) axisymmetric and three-dimensional (3-D) finite element representations for the standard HLW canister and the can-in-canister are developed and analyzed using the dynamic solver.

  9. DropBot: An open-source digital microfluidic control system with precise control of electrostatic driving force and instantaneous drop velocity measurement

    SciTech Connect (OSTI)

    Fobel, Ryan; Donnelly Centre for Cellular and Biomolecular Research, 160 College St., Toronto, Ontario M5S 3E1 ; Fobel, Christian; Wheeler, Aaron R.; Donnelly Centre for Cellular and Biomolecular Research, 160 College St., Toronto, Ontario M5S 3E1; Department of Chemistry, University of Toronto, 80 St. George St., Toronto, Ontario M5S 3H6

    2013-05-13

    We introduce DropBot: an open-source instrument for digital microfluidics (http://microfluidics.utoronto.ca/dropbot). DropBot features two key functionalities for digital microfluidics: (1) real-time monitoring of instantaneous drop velocity (which we propose is a proxy for resistive forces), and (2) application of constant electrostatic driving forces through compensation for amplifier-loading and device capacitance. We anticipate that this system will enhance insight into failure modes and lead to new strategies for improved device reliability, and will be useful for the growing number of users who are adopting digital microfluidics for automated, miniaturized laboratory operation.

  10. Meso-scale controlled motion for a microfluidic drop ejector...

    Office of Scientific and Technical Information (OSTI)

    A paper copy of this document is also available for sale to the public from the National Technical Information Service, Springfield, VA at www.ntis.gov. The objective of this LDRD ...

  11. DOE - Office of Legacy Management -- Utica Drop Forge and Tool Corp - NY 39

    Office of Legacy Management (LM)

    Drop Forge and Tool Corp - NY 39 FUSRAP Considered Sites Site: UTICA DROP FORGE & TOOL CORP. (NY.39) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Utica , New York NY.39-1 Evaluation Year: 1994 NY.39-2 Site Operations: Interest expressed by Utica Drop Forge & Tool Corporation to Conduct Uranium Forging and Casting for the AEC. No indication that the contractor actually did a substantial amount of work of this nature at

  12. Liquefaction of Forest Biomass to Drop-inŽ Hydrocarbon Biofuels...

    Broader source: Energy.gov (indexed) [DOE]

    Liquefaction of Forest Biomass to "Drop-in" Hydrocarbon Biofuels Contract EE0005974 March ... of technologies for production of biofuels and biobased products * Supports the ...

  13. sandia national labs | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national labs

  14. Brookhaven National Laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Brookhaven National Laboratory

  15. Trapping of oil drops in a noncircular pore throat and mobilization upon contact with a surfactant

    SciTech Connect (OSTI)

    Arriola, A.; Green, D.W.; Willhite, G.P.

    1983-02-01

    An experimental apparatus was developed to study trapping and mobilization of oil drops in a capillary of square cross section (100 microns X 100 microns (100 ..mu..m X 100 ..mu..m)) having a constriction also approximately square in shape. Experiments to investigate trapping consisted of injecting a drop of nonwetting phase liquid (''oil'') into a flowing water stream (wetting phase). Pre-equilibrated alcohol/water systems were used to study effects of interfacial tension (IFT). A drop was displaced toward the constriction by the flowing water. The behavior of the drop as it approached and was trapped by the constriction or as it moved through the constriction was observed as a function of flow rate, drop length, and IFT between the water and nonwetting liquid. Mobilization by surfactants was investigated by conducting a series of displacement experiments in the capillary cell. Data from the mobilization experiments allowed two mechanisms to be identified. In Mechanism 1, minute quantities of the surfactant and/or cosurfactant were carried ahead of the main surfactant slug by brine that bypassed the slug. This reduced the IFT between the oil and brine. The oil drop moved further into the constriction and a snap-off process ensued. Mechanism 2 occurred when a sharp interface of the surfactant slug contacted the trailing edge of a nonane drop that was either trapped or in a snap-off process. A series of events that mobilized the drop occurred over a very short time period (< 4.0 seconds). The events included rupture of the drop interface, rolling motions inside the drop with resulting emulsification, and passage of the emulsified drop through the pore constriction without snap-off.

  16. Tests of Four PT-415 Coolers Installed in the Drop-in Mode

    SciTech Connect (OSTI)

    Green, Michael A.; Wang, S.T.

    2008-07-08

    The superconducting magnets and absorbers for MICE will be cooled using PT415 pulse tube coolers. The cooler 2nd stage will be connected to magnets and the absorbers through a helium or hydrogen re-condensing system. It was proposed that the coolers be connected to the magnets in such a way that the cooler can be easily installed and removed, which permits the magnets to be shipped without the coolers. The drop-in mode requires that the cooler 1st stage be well connected to the magnet shields and leads through a low temperature drop demountable connection. The results of the PT415 drop-in cooler tests are presented.

  17. Truman's decision to drop the bomb to be discussed at 70th anniversary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lecture July 10 70th anniversary lecture July 10 about Truman, bomb Truman's decision to drop the bomb to be discussed at 70th anniversary lecture July 10 Noel Pugach will discuss Truman's decision to drop atomic bombs on Japanese cities and explain how and why he made it July 3, 2013 70th anniversary lecture July 10 about Truman, bomb Noel Pugach will discuss Truman's decision to drop atomic bombs on Japanese cities and explain how and why he made it Contact Nick Njegomir Communications

  18. Measurements of control rod efficiency in RBMK critical assembly upon dropping of the rods

    SciTech Connect (OSTI)

    Zhitarev, V. E. Kachanov, V. M.; Sergevnin, A. Yu.; Lebedev, G. V.

    2014-12-15

    The efficiency of control rods in the RBMK critical assembly was measured in the case where one manual-control rod (MCR) is dropped from a steady critical state, and several other MCRs were additionally dropped after 44 s. The measured number of neutrons in the assembly during and after dropping of the rods was used to calculate the efficiency values of the rods by solution of the system of point kinetics equations. A series of methods of the initial data treatment for determination of the desired values of reactivity without the calculated corrections were used.

  19. NANOFLUIDICS REVOLUTION: PROTECTING THE WORLD ONE DROP AT A TIME

    SciTech Connect (OSTI)

    Mendez-Torres, A.; Lam, P.; Bronikowski, M.; Gaillard, J.; Wade, E.; Wang, G.; Lance, S.; Rhodes, O.; Yu, J.

    2012-09-11

    Nanofluidics is a technology that involves the transport of very small liquid samples, on the order of micro- or pico-liters, confined to nanoscale structures. Scientists at the Savannah River National Laboratory (SRNL) in collaboration with the University of South Carolina are investigating a new measurement technique using nanofluidics for fast and easy verification of the presence of special nuclear material (SNM) in aqueous solutions. Research is specifically geared toward developing small-footprint high sensitivity lab-on-a-chip devices for the detection and separation of plutonium. It also laid the groundwork for developing ultra-sensitive sensors using in structural health monitoring system for in situ, noninterrupted detection of the leaching and migration of radionuclides outside the cementitious barriers for nuclear waste storage facilities. This innovative method has promise for the nuclear industry's processing technologies, environmental protection, and safeguards.

  20. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, Lawrence L. (Fayetteville, NY); Bae, Jae-Heum (Daejeon, KR)

    1991-01-01

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes.

  1. Solar power prices are dropping fast, NREL says | OpenEI Community

    Open Energy Info (EERE)

    Solar power prices are dropping fast, NREL says Home > Groups > Buildings Dc's picture Submitted by Dc(266) Contributor 21 October, 2014 - 16:03 The price of solar power panels...

  2. California: Advanced 'Drop-In' Biofuels Power the Navy's Green Strike Group

    Broader source: Energy.gov [DOE]

    EERE's investment allowed Solezyme to increase its algal oil production by a factor of 10, leading to the U.S. Navy's purchase of 450,000 gallons of "drop-in" jet fuel.

  3. Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion

    DOE Patents [OSTI]

    Tavlarides, L.L.; Bae, J.H.

    1991-12-24

    A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes. 17 figures.

  4. A little drop will do it: Tiny grains of lithium can dramatically...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A little drop will do it: Tiny grains of lithium can dramatically improve the performance ... Right: Cross-section of plasma in which lithium has turned the emitted light green. ...

  5. A little drop will do it: Tiny grains of lithium can dramatically...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A little drop will do it: Tiny grains of lithium can dramatically improve the performance ... Right, Cross-section of plasma in which lithium has turned the emitted light green. ...

  6. GE partners with Matthew Dear to create "Drop Science" | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    emissions from the world's most powerful machines. The result is an original track of music titled "Drop Science." Listen to the track here: Watc Matthew Dear and Andrew Gorton...

  7. Big drop in coal-fired electricity generation during first half...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Big drop in coal-fired electricity generation during first half of 2016 The amount of U.S. electricity generated by coal continues to decline in 2016, as power plant operators turn ...

  8. Vaporization modeling of petroleum-biofuel drops using a hybrid multi-component approach

    SciTech Connect (OSTI)

    Zhang, Lei; Kong, Song-Charng

    2010-11-15

    Numerical modeling of the vaporization characteristics of multi-component fuel mixtures is performed in this study. The fuel mixtures studied include those of binary components, biodiesel, diesel-biodiesel, and gasoline-ethanol. The use of biofuels has become increasingly important for reasons of environmental sustainability. Biofuels are often blended with petroleum fuels, and the detailed understanding of the vaporization process is essential to designing a clean and efficient combustion system. In this study, a hybrid vaporization model is developed that uses continuous thermodynamics to describe petroleum fuels and discrete components to represent biofuels. The model is validated using the experimental data of n-heptane, n-heptane-n-decane mixture, and biodiesel. Since biodiesel properties are not universal due to the variation in feedstock, methods for predicting biodiesel properties based on the five dominant fatty acid components are introduced. Good levels of agreement in the predicted and measured drop size histories are obtained. Furthermore, in modeling the diesel-biodiesel drop, results show that the drop lifetime increases with the biodiesel concentration in the blend. During vaporization, only the lighter components of diesel fuel vaporize at the beginning. Biodiesel components do not vaporize until some time during the vaporization process. On the other hand, results of gasoline-ethanol drops indicate that both fuels start to vaporize once the process begins. At the beginning, the lighter components of gasoline have a slightly higher vaporization rate than ethanol. After a certain time, ethanol vaporizes faster than the remaining gasoline components. At the end, the drop reduces to a regular gasoline drop with heavier components. Overall, the drop lifetime increases as the concentration of ethanol increases in the drop due to the higher latent heat. (author)

  9. 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Station | Department of Energy Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station 2014 Hydrogen Student Design Contest to Design Drop-In Hydrogen Fueling Station December 16, 2013 - 12:00am Addthis The 10th annual Hydrogen Student Design Contest will challenge student teams to design a transportable, containerized hydrogen fueling station solution. Registration for the contest, supported by the U.S. Department of Energy's Office of Energy Efficiency and Renewable

  10. National Competitiveness

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Competition National Clean Energy Business Plan Competition The National Clean Energy Business Plan Competition inspired nearly 300 university teams across the country to create new businesses to commercialize promising energy technologies developed at U.S. universities and the National Laboratories. After pitching their business plans to panels of judges at the regional semifinals and finals, six teams advanced to the national competition for a chance to compete in the popular vote and a grand

  11. Effect of bed pressure drop on performance of a CFB boiler

    SciTech Connect (OSTI)

    Hairui Yang; Hai Zhang; Shi Yang; Guangxi Yue; Jun Su; Zhiping Fu

    2009-05-15

    The effect of bed pressure drop and bed inventory on the performances of a circulating fluidized bed (CFB) boiler was studied. By using the state specification design theory, the fluidization state of the gas-solids flow in the furnace of conventional CFB boilers was reconstructed to operate at a much lower bed pressure drop by reducing bed inventory and control bed quality. Through theoretical analysis, it was suggested that there would exist a theoretical optimal value of bed pressure drop, around which the boiler operation can achieve the maximal combustion efficiency and with significant reduction of the wear of the heating surface and fan energy consumption. The analysis was validated by field tests carried out in a 75 t/h CFB boiler. At full boiler load, when bed pressure drop was reduced from 7.3 to 3.2 kPa, the height of the dense zone in the lower furnace decreased, but the solid suspension density profile in the upper furnace and solid flow rate were barely influenced. Consequently, the average heat transfer coefficient in the furnace was kept nearly the same and the furnace temperature increment was less than 17{sup o}C. It was also found that the carbon content in the fly ash decreased first with decreasing bed pressure drop and then increased with further increasing bed pressure drop. The turning point with minimal carbon content was referred to as the point with optimal bed pressure drop. For this boiler, at the optimum point the bed pressure was around 5.7 kPa with the overall excess air ratio of 1.06. When the boiler was operated around this optimal point, not only the combustion efficiency was improved, but also fan energy consumption and wear of heating surface were reduced. 23 refs., 6 figs., 4 tabs.

  12. TN-68 Spent Fuel Transport Cask Analytical Evaluation for Drop Events

    SciTech Connect (OSTI)

    Shah, M. J.; Klymyshyn, Nicholas A.; Adkins, Harold E.; Koeppel, Brian J.

    2007-03-30

    The U.S. Nuclear Regulatory Commission (NRC) is responsible for licensing commercial spent nuclear fuel transported in casks certified by NRC under the Code of Federal Regulations (10 CFR), Title 10, Part 71 [1]. Both the International Atomic Energy Agency regulations for transporting radioactive materials [2, paragraph 727], and 10 CFR 71.73 require casks to be evaluated for hypothetical accident conditions, which includes a 9-meter (m) (30-ft) drop-impact event onto a flat, essentially unyielding, horizontal surface, in the most damaging orientation. This paper examines the behavior of one of the NRC certified transportation casks, the TN-68 [3], for drop-impact events. The specific area examined is the behavior of the bolted connections in the cask body and the closure lid, which are significantly loaded during the hypothetical drop-impact event. Analytical work to evaluate the NRC-certified TN-68 spent fuel transport cask [3] for a 9-m (30-ft) drop-impact event on a flat, unyielding, horizontal surface, was performed using the ANSYS® [4] and LS DYNA™ [5] finite-element analysis codes. The models were sufficiently detailed, in the areas of bolt closure interfaces and containment boundaries, to evaluate the structural integrity of the bolted connections under 9-m (30-ft) free-drop hypothetical accident conditions, as specified in 10 CFR 71.73. Evaluation of the cask for puncture, caused by a free drop through a distance of 1-m (40-in.) onto a mild steel bar mounted on a flat, essentially unyielding, horizontal surface, required by 10 CFR 71.73, was not included in the current work, and will have to be addressed in the future. Based on the analyses performed to date, it is concluded that, even though brief separation of the flange and the lid surfaces may occur under some conditions, the seals would close at the end of the drop events, because the materials remain elastic during the duration of the event.

  13. Experimental investigation of ice slurry flow pressure drop in horizontal tubes

    SciTech Connect (OSTI)

    Grozdek, Marino; Khodabandeh, Rahmatollah; Lundqvist, Per [Royal Institute of Technology, Department of Energy Technology, Division of Applied Thermodynamics and Refrigeration, Brinellvaegen 68, 10044 Stockholm (Sweden)

    2009-01-15

    Pressure drop behaviour of ice slurry based on ethanol-water mixture in circular horizontal tubes has been experimentally investigated. The secondary fluid was prepared by mixing ethyl alcohol and water to obtain initial alcohol concentration of 10.3% (initial freezing temperature -4.4 C). The pressure drop tests were conducted to cover laminar and slightly turbulent flow with ice mass fraction varying from 0% to 30% depending on test conditions. Results from flow tests reveal much higher pressure drop for higher ice concentrations and higher velocities in comparison to the single phase flow. However for ice concentrations of 15% and higher, certain velocity exists at which ice slurry pressure drop is same or even lower than for single phase flow. It seems that higher ice concentration delay flow pattern transition moment (from laminar to turbulent) toward higher velocities. In addition experimental results for pressure drop were compared to the analytical results, based on Poiseulle and Buckingham-Reiner models for laminar flow, Blasius, Darby and Melson, Dodge and Metzner, Steffe and Tomita for turbulent region and general correlation of Kitanovski which is valid for both flow regimes. For laminar flow and low buoyancy numbers Buckingham-Reiner method gives good agreement with experimental results while for turbulent flow best fit is provided with Dodge-Metzner and Tomita methods. Furthermore, for transport purposes it has been shown that ice mass fraction of 20% offers best ratio of ice slurry transport capability and required pumping power. (author)

  14. Simulation and analysis of the plutonium shipping container subject to 30-foot drops

    SciTech Connect (OSTI)

    Gong, C.; Gupta, N.K.; Gromada, R.J.

    1995-12-31

    The shipping container 5320 is a shipping package for radioactive materials. In order to maintain the component in this packaging within the sub-critical state when subjected to any kind of Hypothetical Accident conditions (HAC), this Type B packaging is designed with various impact limiters. The present study is to examine the energy absorbing capacity of the impact limiter design of this container subjected to a 30-foot drop onto a flat unyielding horizontal surface in each of the three critical dropping orientations. This paper presents the results of a three dimensional nonlinear dynamic impact analysis. This analysis shows the deformed configuration of the container caused by the impact and also determines the effects of different stress wave paths in three distinct drops on the stress states in the critical component. The solution to the problem was obtained using the ABAQUS (explicit) finite element computer code. The nonlinearity of this analysis involves large structural deformation, elasto-plastic materials with strain hardening as well as multiple contact interfaces. Three drop orientations were studied, namely, top down impact, bottom down impact and side impact. Results will be compared against actual drop test data.

  15. Investigation of pressure drop in capillary tube for mixed refrigerant Joule-Thomson cryocooler

    SciTech Connect (OSTI)

    Ardhapurkar, P. M.; Sridharan, Arunkumar; Atrey, M. D.

    2014-01-29

    A capillary tube is commonly used in small capacity refrigeration and air-conditioning systems. It is also a preferred expansion device in mixed refrigerant Joule-Thomson (MR J-T) cryocoolers, since it is inexpensive and simple in configuration. However, the flow inside a capillary tube is complex, since flashing process that occurs in case of refrigeration and air-conditioning systems is metastable. A mixture of refrigerants such as nitrogen, methane, ethane, propane and iso-butane expands below its inversion temperature in the capillary tube of MR J-T cryocooler and reaches cryogenic temperature. The mass flow rate of refrigerant mixture circulating through capillary tube depends on the pressure difference across it. There are many empirical correlations which predict pressure drop across the capillary tube. However, they have not been tested for refrigerant mixtures and for operating conditions of the cryocooler. The present paper assesses the existing empirical correlations for predicting overall pressure drop across the capillary tube for the MR J-T cryocooler. The empirical correlations refer to homogeneous as well as separated flow models. Experiments are carried out to measure the overall pressure drop across the capillary tube for the cooler. Three different compositions of refrigerant mixture are used to study the pressure drop variations. The predicted overall pressure drop across the capillary tube is compared with the experimentally obtained value. The predictions obtained using homogeneous model show better match with the experimental results compared to separated flow models.

  16. Negative pressures and spallation in water drops subjected to nanosecond shock waves

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Stan, Claudiu A.; Willmott, Philip R.; Stone, Howard A.; Koglin, Jason E.; Liang, Mengning; Aquila, Andrew L.; Robinson, Joseph S.; Gumerlock, Karl L.; Blaj, Gabriel; Sierra, Raymond G.; et al

    2016-05-16

    Most experimental studies of cavitation in liquid water at negative pressures reported cavitation at tensions significantly smaller than those expected for homogeneous nucleation, suggesting that achievable tensions are limited by heterogeneous cavitation. We generated tension pulses with nanosecond rise times in water by reflecting cylindrical shock waves, produced by X-ray laser pulses, at the internal surface of drops of water. Depending on the X-ray pulse energy, a range of cavitation phenomena occurred, including the rupture and detachment, or spallation, of thin liquid layers at the surface of the drop. When spallation occurred, we evaluated that negative pressures below –100 MPamore » were reached in the drops. As a result, we model the negative pressures from shock reflection experiments using a nucleation-and-growth model that explains how rapid decompression could outrun heterogeneous cavitation in water, and enable the study of stretched water close to homogeneous cavitation pressures.« less

  17. Consent Order, Lawrence Livermore National National Security...

    Office of Environmental Management (EM)

    Lawrence Livermore National National Security, LLC - WCO-2010-01 Consent Order, Lawrence Livermore National National Security, LLC - WCO-2010-01 October 29, 2010 Issued to Lawrence ...

  18. Numerical investigation of low-viscosity drop breakup in a contracting flow

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Numerical investigation of low-viscosity drop breakup in a contracting flow Citation Details In-Document Search Title: Numerical investigation of low-viscosity drop breakup in a contracting flow Authors: Zhu, Guangdong ; Mammoli, Andrea Publication Date: 2011-03-01 OSTI Identifier: 1256411 Report Number(s): NREL/JA-550-51916 Journal ID: ISSN 1531-3492 DOE Contract Number: AC36-08GO28308 Resource Type: Journal Article Resource Relation: Journal Name:

  19. EERE Success Story-California: Advanced 'Drop-In' Biofuels Power the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Navy's Green Strike Group | Department of Energy Advanced 'Drop-In' Biofuels Power the Navy's Green Strike Group EERE Success Story-California: Advanced 'Drop-In' Biofuels Power the Navy's Green Strike Group April 18, 2013 - 12:00am Addthis Partnering with Solazyme of San Francisco, EERE enabled the company to increase its production of algal oil by a factor of 10. In December 2011, the U.S. Navy's Defense Logistics Agency (DLA) announced that it would purchase 450,000 gallons of Solazyme's

  20. HI-STAR 100 Spent Fuel Transport Cask Analytical Evaluation for Drop Events

    SciTech Connect (OSTI)

    Shah, M. J.; Klymyshyn, Nicholas A.; Adkins, Harold E.; Koeppel, Brian J.

    2007-03-30

    The U.S. Nuclear Regulatory Commission (NRC) is responsible for licensing commercial spent nuclear fuel transported in casks certified by NRC under the Code of Federal Regulations (CFR), Title 10, Part 71 [1]. Both the International Atomic Energy Agency (IAEA) regulations for transporting radioactive materials [2, paragraph 727], and 10 CFR 71.73 require casks to be evaluated for hypothetical accident conditions, which includes a 9-meter (m) (30-ft) drop impact event on a flat, essentially unyielding, horizontal surface, in the most damaging orientation. This paper examines the behavior of one of the NRC-certified transportation casks, the HI-STAR 100 [3], for drop impact events. The specific area examined is the behavior of the bolted connections in the “overpack” top flange and the closure plate, which are significantly loaded during the hypothetical drop impact event. The term “overpack” refers to the cask that receives and contains a sealed multi-purpose canister (MPC) containing spent nuclear fuel. The analytical work to evaluate the NRC-certified HI-STAR 100 spent fuel transport cask [3] for a 9-m (30-ft) drop impact event on a flat, unyielding, horizontal surface, was performed using the ANSYS® [4] and LS DYNA™ [5] finite-element analysis codes. The models were sufficiently detailed, in the areas of bolt closure interfaces and containment boundaries, to evaluate the structural integrity of the bolted connections under 9-m (30-ft) free-drop hypothetical accident conditions, as specified in 10 CFR 71.73. Evaluation of the cask for puncture, caused by a free-drop through a distance of 1-m (40-in.) onto a mild steel bar mounted on a flat, essentially unyielding, horizontal surface, required by 10 CFR 71.73, was not included in the current work, and will have to be addressed in the future. Based on the analyses performed to date, it is concluded that, even though brief separation of the flange and the closure plate surfaces may occur, the seals would

  1. Bag breakup of low viscosity drops in the presence of a continuous air jet

    SciTech Connect (OSTI)

    Kulkarni, V. Sojka, P. E.

    2014-07-15

    This work examines the breakup of a single drop of various low viscosity fluids as it deforms in the presence of continuous horizontal air jet. Such a fragmentation typically occurs after the bulk liquid has disintegrated upon exiting the atomizer and is in the form of an ensemble of drops which undergo further breakup. The drop deformation and its eventual disintegration is important in evaluating the efficacy of a particular industrial process, be it combustion in automobile engines or pesticide spraying in agricultural applications. The interplay between competing influences of surface tension and aerodynamic disruptive forces is represented by the Weber number, We, and Ohnesorge number, Oh, and used to describe the breakup morphology. The breakup pattern considered in our study corresponds to that of a bag attached to a toroidal ring which occurs from ?12 < We < ?16. We aim to address several issues connected with this breakup process and their dependence on We and Oh which have been hitherto unexplored. The We boundary at which breakup begins is theoretically determined and the expression obtained, We=12(1+2/3Oh{sup 2}), is found to match well with experimental data ([L.-P. Hsiang and G. M. Faeth, Int. J. Multiphase Flow 21(4), 545560 (1995)] and [R. S. Brodkey, Formation of drops and bubbles, in The Phenomena of Fluid Motions (Addison-Wesley, Reading, 1967)]). An exponential growth in the radial extent of the deformed drop and the streamline dimension of the bag is predicted by a theoretical model and confirmed by experimental findings. These quantities are observed to strongly depend on We. However, their dependence on Oh is weak.

  2. Define and Quantify the Physics of Air Flow, Pressure Drop and Aerosol Collection in Nuclear Grade HEPA Filters

    SciTech Connect (OSTI)

    Moore, Murray E.

    2015-02-23

    Objective: Develop a set of peer-review and verified analytical methods to adjust HEPA filter performance to different flow rates, temperatures and altitudes. Experimental testing will measure HEPA filter flow rate, pressure drop and efficiency to verify the analytical approach. Nuclear facilities utilize HEPA (High Efficiency Particulate Air) filters to purify air flow for workspace ventilation. However, the ASME AG-1 technical standard (Code on Nuclear Air and Gas Treatment) does not adequately describe air flow measurement units for HEPA filter systems. Specifically, the AG-1 standard does not differentiate between volumetric air flow in ACFM (actual cubic feet per minute)compared to mass flow measured in SCFM (standard cubic feet per minute). More importantly, the AG-1 standard has an overall deficiency for using HEPA filter devices at different air flow rates, temperatures, and altitudes. Technical Approach: The collection efficiency and pressure drops of 18 different HEPA filters will be measured over a range of flow rates, temperatures and altitudes. The experimental results will be compared to analytical scoping calculations. Three manufacturers have allocated six HEPA filters each for this effort. The 18 filters will be tested at two different flow rates, two different temperatures and two different altitudes. The 36 total tests will be conducted at two different facilities: the ATI Test facilities (Baltimore MD) and the Los Alamos National Laboratory (Los Alamos NM). The Radiation Protection RP-SVS group at Los Alamos has an aerosol wind tunnel that was originally designed to evaluate small air samplers. In 2010, modifications were started to convert the wind tunnel for HEPA filter testing. (Extensive changes were necessary for the required aerosol generators, HEPA test fixtures, temperature control devices and measurement capabilities.) To this date, none of these modification activities have been funded through a specific DOE or NNSA program. This is

  3. The role of aerosols in cloud drop parameterizations and its applications in global climate models

    SciTech Connect (OSTI)

    Chuang, C.C.; Penner, J.E.

    1996-04-01

    The characteristics of the cloud drop size distribution near cloud base are initially determined by aerosols that serve as cloud condensation nuclei and the updraft velocity. We have developed parameterizations relating cloud drop number concentration to aerosol number and sulfate mass concentrations and used them in a coupled global aerosol/general circulation model (GCM) to estimate the indirect aerosol forcing. The global aerosol model made use of our detailed emissions inventories for the amount of particulate matter from biomass burning sources and from fossil fuel sources as well as emissions inventories of the gas-phase anthropogenic SO{sub 2}. This work is aimed at validating the coupled model with the Atmospheric Radiation Measurement (ARM) Program measurements and assessing the possible magnitude of the aerosol-induced cloud effects on climate.

  4. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supercomputing Challenge draws more than 200 students to Los Alamos National Laboratory April 16, 2015 NOTE TO EDITORS: Media are welcome to attend the awards ceremony from 9 a.m. to noon a.m., April 21 at the Church of Christ, 2323 Diamond Drive, Los Alamos. Student teams from around New Mexico showcase year-long research projects April 20-21 LOS ALAMOS, N.M., April 16, 2015-More than 200 New Mexico students and their teachers are at Los Alamos National Laboratory April 20-21 for the 25th

  5. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community invited to learn about emerging technologies July 6, 2016 DisrupTech showcases innovation from Los Alamos National Laboratory LOS ALAMOS, N.M., July 6, 2016-New technologies emerging from Los Alamos National Laboratory that address everything from fusion energy to medical testing will be on display for members of the community, investors and business leaders at the DisrupTech showcase, Thursday, July 14, starting at 1:00 p.m. at the Los Alamos Golf Course Event Center. "We call it

  6. Discovered: Tiny Drops of "Perfect" Fluid that Existed in the Early

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Universe | U.S. DOE Office of Science (SC) Discovered: Tiny Drops of "Perfect" Fluid that Existed in the Early Universe Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: Email Us More

  7. TRUPACT-I Unit 0 test data analysis. [Puncture bar impacts; free fall of package 12 inches onto unyielding surface; 30-foot free fall drop onto unyielding target; 40-inch drops onto 6-inch diagmeter puncture bar; engulfment in jet fuel fire for 35 minutes

    SciTech Connect (OSTI)

    Romesberg, L.E.; Hudson, M.L.; Osborne, D.M.

    1985-09-01

    TRUPACT-I was tested to evaluate the response of the design to the normal and hypothetical accident conditions specified in applicable regulations. The governing regulations are contained in DOE Order No. 5480.1, Chapter 3 and 10 CFR, Part 71, Refs. 1 and 2. Tests were conducted at Oak Ridge National Laboratory, Oak Ridge, TN, and at Sandia National Laboratories, Albuquerque, NM. Normal condition tests included three 13-pound (1.25 in. diameter) puncture bar impacts onto the exterior surface and free fall of the package 12 inches onto an essentially unyielding surface. Hypothetical accident conditions included in the test sequence were two 30-foot free fall drops of the package onto an essentially unyielding target, four 40-inch drops onto a 6-inch-diameter puncture bar, and engulfment in a JP-4 jet fuel fire for 35 minutes. Instrumentation data traces will be published in Ref. 3 and are not reproduced herein. This report presents an analysis of the available data and an interpretation of the results. The results of the tests are compared to results from numerical analyses and scale model tests which are incorporated in the TRUPACT-I SARP, Ref. 4. 9 refs., 43 figs., 3 tabs.

  8. EERE Success Story-Nationwide: The Nation's First Commercial-Scale

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biorefineries | Department of Energy The Nation's First Commercial-Scale Biorefineries EERE Success Story-Nationwide: The Nation's First Commercial-Scale Biorefineries November 6, 2013 - 12:29pm Addthis EERE supports 25 integrated biorefineries that are specifically focused on producing cellulosic ethanol, drop-in hydrocarbon biofuel, and bioproducts. As of July 2013, INEOS opened the nation's first commercial-scale biorefinery in Vero Beach, Florida, and began produc-tion of cellulosic

  9. Pressure drop and heat transfer characteristics of boiling water in sub-hundred micron channel

    SciTech Connect (OSTI)

    Bhide, R.R.; Singh, S.G.; Sridharan, Arunkumar; Duttagupta, S.P.; Agrawal, Amit [Department of Mechanical Engineering, Indian Institute of Technology Bombay, Powai, Mumbai 400 076 (India)

    2009-09-15

    The current work focuses on the pressure drop, heat transfer and stability in two phase flow in microchannels with hydraulic diameter of less than one hundred microns. Experiments were conducted in smooth microchannels of hydraulic diameter of 45, 65 {mu}m, and a rough microchannel of hydraulic diameter of 70 {mu}m, with deionised water as the working fluid. The local saturation pressure and temperature vary substantially over the length of the channel. In order to correctly predict the local saturation temperature and subsequently the heat transfer characteristics, numerical techniques have been used in conjunction with the conventional two phase pressure drop models. The Lockhart-Martinelli (liquid-laminar, vapour-laminar) model is found to predict the two phase pressure drop data within 20%. The instability in two phase flow is quantified; it is found that microchannels of smaller hydraulic diameter have lesser instabilities as compared to their larger counterparts. The experiments also suggest that surface characteristics strongly affect flow stability in the two phase flow regime. The effect of hydraulic diameter and surface characteristics on the flow characteristics and stability in two phase flow is seldom reported, and is of considerable practical relevance. (author)

  10. Prediction of Frictional Pressure Drop During Water Permeation Through Packed Beds of Granular Particulates

    SciTech Connect (OSTI)

    KING, WILLIAM D.; ALEMAN, SEBASTIAN E.; HAMM, L. LARRY; PETTIS, MYRA A.

    2005-10-25

    A methodology has been developed based on the Kozeny-Carman equation to predict frictional pressure drops during water permeation of packed columns containing essentially noncompressible, but highly irregular particles. The resulting model accurately predicts pressure drop as a function of liquid flow rate and resin particle size for this system. A total of five particle sieve cuts across the range -20 to +70 mesh were utilized for testing using deionized water as the mobile phase. The Rosin-Rammler equation was used to fit the raw particle size data (wet sieve analysis) for the as-received resin sample and generate a continuous cumulative distribution function based on weight percent passing through the sieve. Probability distribution functions were calculated from the cumulative distribution for each particle sieve cut tested. Nine particle diameter definitions (i.e., number mean, volume mean, etc.) were then selected from the distribution function for each sample to represent the average spherically-equivalent particle diameter as input to the Kozeny-Carman equation. Nonlinear least squares optimization of the normalized pressure drop residuals were performed by parameter estimation of particle shape factor and bed porosity for all samples simultaneously using a given average particle diameter definition. Good fits to the full experimental data set were obtained when utilizing the number mean and the number median diameters. However, the shape factor and porosity values of 0.88 and 0.40, respectively, obtained from fitting the data using the number mean diameter were more consistent with experimental observations.

  11. Evaluation of impact limiter performance during end-on and slapdown drop tests of a one-third scale model storage/transport cask system

    SciTech Connect (OSTI)

    Yoshimura, H.R.; Bronowski, D.R.; Uncapher, W.L.; Attaway, S.W.; Bateman, V.I.; Carne, T.G.; Gregory, D.L. ); Huerta, M. )

    1990-12-01

    This report describes drop testing of a one-third scale model shipping cask system. Two casks were designed and fabricated by Transnuclear, Inc., to ship spent fuel from the former Nuclear Fuel Services West Valley reprocessing facility in New York to the Idaho National Engineering Laboratory for a long-term spent fuel dry storage demonstration project. As part of the NRC's regulatory certification process, one-third scale model tests were performed to obtain experimental data on impact limiter performance during impact testing. The objectives of the testing program were to (1) obtain deceleration and displacement information for the cask and impact limiter system, (2) obtain dynamic force-displacement data for the impact limiters, (3) verify the integrity of the impact limiter retention system, and (4) examine the crush behavior of the limiters. Two 30-ft (9-m) drop tests were conducted on a mass model of the cask body and scaled balsa and redwood-filled impact limiters. This report describes the results of both tests in terms of measured decelerations, posttest deformation measurements, and the general structural response of the system. 3 refs., 32 figs.

  12. EIS-0522: Melvin R. Sampson Hatchery, Yakima Basin Coho Project; Kittitas County, Washington

    Broader source: Energy.gov [DOE]

    The Bonneville Power Administration (BPA) is preparing an EIS that analyzes the potential environmental impacts of constructing and operating a proposed hatchery for coho salmon. BPA’s proposed action is to fund the Confederated Tribes of the Yakama Nation construction of a hatchery on 50 acres of land owned by the Yakama Nation in Kittitas County, Washington. Hatchery operations would include collection of adult coho for broodstock at the existing Roza and Sunnyside dams, incubation and rearing of up to 200,000 juvenile coho salmon, and release of smolts into the Yakima and Naches Rivers.

  13. Microsoft PowerPoint - RAP IAP Presententation2.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Injury Assessment Plan River and Plateau Committee Hanford Advisory Board Larry Goldstein Larry Goldstein October 9, 2012 1 2 Who We Are State of Oregon State of Washington U.S. Department of Energy U.S. Department of Commerce (NOAA) U S D t t f I t i (Fi h d Wildlif S i ) U.S. Department of Interior (Fish and Wildlife Service) Nez Perce Tribe Confederated Tribes and Bands of the Yakama Nation Confederated Tribes and Bands of the Yakama Nation Confederated Tribes of the Umatilla Indian

  14. Experimental characterization of pressure drops and channel instabilities in helical coil SG tubes

    SciTech Connect (OSTI)

    Colombo, M.; Cammi, A.; De Amicis, J.; Ricotti, M. E.

    2012-07-01

    Helical tube heat exchangers provide better heat transfer characteristics, an improved capability to accommodate stresses due to thermal expansions and a more compact design with respect to straight tube heat exchangers. For these advantages they are considered as an option for the Steam Generator (SG) of many new reactor projects of Generation III+ and Generation IV. In particular, their compactness fits well with the requirements of Small-medium Modular Reactors (SMRs) of integral design, where all the primary system components are located inside the reactor vessel. In this framework, thermal hydraulics of helical pipes has been studied in recent years by Politecnico di Milano in different experimental campaigns. Experiments have been carried out in a full-scale open loop test facility installed at SIET labs in Piacenza (Italy)), to simulate the SG of a typical SMR. The facility includes two helical pipes (1 m coil diameter, 32 m length, 8 m height), connected via lower and upper headers. Following recently completed experimental campaigns dedicated to pressure drops and density wave instabilities, this paper deals with a new experimental campaign focused on both pressure drops (single-phase flow and two-phase flow, laminar and turbulent regimes) and flow instabilities. The availability of a large number of experimental data, in particular on two-phase flow, is of fundamental interest for correlation development, model validation and code assessment. Two-phase pressure drops have been measured in adiabatic conditions, ranging from 200 to 600 kg/m{sup 2}s for the mass flux, from 30 to 60 bar for the pressure and from 0.1 to 1.0 for the flow quality. The channel characteristics mass flow rate - pressure drop has been determined experimentally in the range 10-40 bar, varying the mass flow rate at a fixed value of the thermal flux. In addition, single-phase pressure drops have been measured in both laminar and turbulent conditions. Density wave instabilities have

  15. National Nuclear Security Administration | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  16. National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ignition Facility Former Army Ranger wins Sandia-sponsored student of the year award Former Army Ranger Damon Alcorn recently received the Sandia National Laboratories-Livermore Chamber of Commerce Student of the Year Award. Presented at the Chamber's State of the City Luncheon last month, the annual award highlights a Las Positas College student with exemplary academic... NNSA makers and hackers engage innovation and partnerships NNSA's labs change the world everyday through cutting-edge

  17. Syracuse Univesity Test Report On Uptake Factor Resulting From A Dropped Storage Container - Phase II

    SciTech Connect (OSTI)

    Gao, Zhi; Zhang, Jianshun S.

    2012-01-01

    Under certain circumstances, powder from an accidently dropped container can become airborne and inhaled by people nearby such as those who are moving the containers. The inhaled fine particles can deposit on respiratory tracts and lungs, causing asthma, lung cancer, and other acute respiratory illnesses and chronic symptoms. The objective of this study was to develop a standard procedure to measure the airborne concentrations of different size particles within the vicinity of a dropped container where a significant portion of the contained powder is ejected. Tungsten oxide (WO{sub 3}) was selected in this study to represent relatively heavy powders (7.16 g/cm3 specific gravity for WO{sub 3}). A typical can with the outer dimensions of 4.25 diameter and 4.875 tall was used as the container. The powder was dropped in two different configurations: 1) contained within a can covered by a lid that has a 0.25 diameter hole, and 2) contained within a can without a lid. The packing volume of the powder was 51.4 in3 (842.7 cm{sup 3}) and the target mass was 1936 g. The tests were carried out in a full-scale stainless steel environmental chamber with an interior volume of 852 ft3 (24.1 m3). The chamber system includes an internal recirculation loop with a rectangular air diffuser and 10 variable frequency drive fans to provide a typical room air recirculation flow pattern. Two air filters were installed in the chamber air supply duct and return duct to achieve the required low background particle concentration. The initial chamber air conditions were set at 70F ( 5F) and 50% ( 10%) RH. A supporting frame and releasing device were designed and built to trigger consistently the dropping of the can. The particle sampling inlet was placed 5 ft above the floor and 6 inches laterally away from the cans falling path. Concentrations of particles between 0.5 ?m and 20 ?m were recorded in units of mass and number of particles per unit volume. The data acquisition rate was once

  18. The influence of surfactant on the deformation and breakup of a viscous drop: The effect of surfactant solubility

    SciTech Connect (OSTI)

    Milliken, W.J. ); Leal, L.G. . Dept. of Chemical and Nuclear Engineering)

    1994-09-01

    The influence of surfactant on the deformation of a viscous drop in a uniaxial extensional flow is considered. Previous studies have examined the role in insoluble surfactant. Here, the authors examine soluble surfactant, i.e., surfactant that may be transferred between the interface and the continuous phase. The transfer of surfactant to and from the interface mitigates many of the effects observed with insoluble surfactant by diminishing the magnitude of surfactant gradients. In the presence of soluble surfactant, the deformation generally lies between that of insoluble surfactant and that of a drop with a constant and uniform coverage of surfactant. However, there are notable exceptions particularly at high surfactant activity. The influence of surfactant on the interfacial velocity of the drop is also explicitly considered. It is shown that while insoluble surfactant can substantially retard a drop interface, interphase surfactant transfer acts to remobilize the interface.

  19. Effects of sudden expansion and contraction flow on pressure drops in the Stirling engine regenerator

    SciTech Connect (OSTI)

    Hamaguchi, K.; Yamashita, I.; Hirata, K.

    1998-07-01

    The flow losses in the regenerators greatly influence the performance of the Stirling engine. The losses mainly depend on fluid friction through the regenerator matrix, but are also generated in sudden expansion and contraction flow at the regenerator ends. The latter losses can't be neglected in the case of small area ratio (entrance area/cross-sectional area in regenerator). The pressure drops in regenerators are usually estimated assuming a uniform velocity distribution of working gas in the matrices. The estimation results, however, are generally smaller than practical data. The cross-sectional flow areas of the heater and cooler of typical Stirling engines are smaller than the cross- sectional area of the regenerator. The effects of the small flow passage on the velocity distribution of working fluid in the matrix, that is, a flow transition from tubes or channels to a regenerator matrix, can be often confirmed by the discolored matrix. Especially, the lack of a uniform distribution of velocity in the matrix causes increased flow loss and decreased thermal performance. So, it is necessary to understand the quantitative effects of the sudden change in flow area at the regenerator ends on the velocity distribution and pressure drop. In this paper, using matrices made of stacks of wire screens, the effects of the entrance and exit areas and the length of the regenerator on pressure drops are examined by an unidirectional steady flow apparatus. The experimental data are arranged in an empirical equation. The lack of a uniformity of velocity distribution is visualized using smoke-wire methods. The empirical equation presented is applied to the estimation of pressure loss in an actual engine regenerator. The applicability of the equation is examined by comparison of estimated value with engine data in pressure loss.

  20. W88 warhead program performs successful tests | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) W88 warhead program performs successful tests Tuesday, October 28, 2014 - 1:21pm The first flight and drop tests for the latest variant of the W88 nuclear warhead are providing data for Sandia National Laboratories to validate designs, improve computer modeling and update component specifications. The two successful tests, which were conducted this summer, provide data for the program, the W88 ALT 370 (alteration), to move forward, The Critical Radar Arming and Fuzing

  1. Testing the density matrix expansion against ab initio calculations of trapped neutron drops

    SciTech Connect (OSTI)

    Bogner, S. K.; Hergert, H.; Furnstahl, R. J.; Kortelainen, Erno M; Stoitsov, M. V.; Maris, Pieter; Vary, J. P.

    2011-01-01

    Microscopic input to a universal nuclear energy density functional can be provided through the density matrix expansion (DME), which has recently been revived and improved. Several DME implementation strategies are tested for neutron drop systems in harmonic traps by comparing to Hartree-Fock (HF) and ab initio no-core full configuration (NCFC) calculations with a model interaction (Minnesota potential). The new DME with exact treatment of Hartree contributions is found to best reproduce HF results and supplementing the functional with fit Skyrme-like contact terms shows systematic improvement toward the full NCFC results.

  2. Foot Drop after Ethanol Embolization of Calf Vascular Malformation: A Lesson on Nerve Injury

    SciTech Connect (OSTI)

    Tay, Vincent Khwee-Soon; Mohan, P. Chandra; Liew, Wendy Kein Meng; Mahadev, Arjandas; Tay, Kiang Hiong

    2013-08-01

    Ethanol is often used in sclerotherapy to treat vascular malformations. Nerve injury is a known complication of this procedure. However, the management of this complication is not well described in literature. This case describes a 10-year-old boy with a slow flow vascular malformation in the right calf who underwent transarterial ethanol embolization following prior unsuccessful direct percutaneous sclerotherapy. The development of a dense foot drop that subsequently recovered is described, and the management of this uncommon but distressful complication is discussed.

  3. NATIONAL LABORATORY

    Office of Environmental Management (EM)

    N E W U T I L I T Y B U S I N E S S M O D E L S : Utility and Regulatory Models for the Modern Era Ronald Lehr former Public Utilities Commissioner A M E R I C A ' S POWER PLAN A m e r i c a ' s P o w e r P l a n Ralph Cavanagh, Natural Resources Defense Council Peter Fox-Penner, Brattle Group Tom King, National Grid Richard Sedano, Regulatory Assistance Project Alison Silverstein, former Federal Energy Regulatory Lisa Wood, Edison Foundation's Institute for Electric Efficiency We would like to

  4. National Laboratories and Internatioanl Partnering

    SciTech Connect (OSTI)

    Eagan, R.J.; Gauster, W.B.; Hartley, D.L.; Jones, G.J.

    1998-12-07

    For nearly fifty years the US held a dominant position in research and development in the free world. The situation has changed dramatically in the last decade. Countries around the world realize that to foster sustainable economic growth, they must build and maintain a foundation in science and technology. The time in which a country could base its gross national product solely on extraction of raw materials or on people-intensive manufacturing is drawing to a close. The funding for research and development has been growing in the rest of the world, while US expenditures have not kept pace. In 1961, the United States funded 71 `?40 of the world's R&D. It is estimated that the US contribution to research and development fimding today has reached the 3 3o/0 level, and will drop to 26o/0 of the world's total by 2003.1 In 1981 US government spending per capita on non-defense research and development was nearly fifty percent above our major competitors; by 2002 it is projected to be f@ percent below them.2 This trend has a profound impact on how research and development institutions in the United States plan for their future technical growth. Sandia National Laboratories, as one of the largest US-government tided research establishments, has been watching this trend for some time. %ndi~ focusing on the Laboratories' missions in nuclear weapons and related defense systems, energy security, environmental integrity, and emerging national challenges, is committed to bringing the best in world-class technology to bear on the nation's problems. We realize maintaining our state-of-the-art technolo=~ base requires we look not only to domestic sources in universities, industries and other laboratories, but also to sources overseas. The realization that we must be "worldwide gatherers of technology" has led Sandia National Laboratories to consider the question of international partnering in some detaiI. As a national laboratory with a national security mission we are well aware

  5. Biofuels Fuels Technology Pathway Options for Advanced Drop-in Biofuels Production

    SciTech Connect (OSTI)

    Kevin L Kenney

    2011-09-01

    Advanced drop-in hydrocarbon biofuels require biofuel alternatives for refinery products other than gasoline. Candidate biofuels must have performance characteristics equivalent to conventional petroleum-based fuels. The technology pathways for biofuel alternatives also must be plausible, sustainable (e.g., positive energy balance, environmentally benign, etc.), and demonstrate a reasonable pathway to economic viability and end-user affordability. Viable biofuels technology pathways must address feedstock production and environmental issues through to the fuel or chemical end products. Potential end products include compatible replacement fuel products (e.g., gasoline, diesel, and JP8 and JP5 jet fuel) and other petroleum products or chemicals typically produced from a barrel of crude. Considering the complexity and technology diversity of a complete biofuels supply chain, no single entity or technology provider is capable of addressing in depth all aspects of any given pathway; however, all the necessary expert entities exist. As such, we propose the assembly of a team capable of conducting an in-depth technology pathway options analysis (including sustainability indicators and complete LCA) to identify and define the domestic biofuel pathways for a Green Fleet. This team is not only capable of conducting in-depth analyses on technology pathways, but collectively they are able to trouble shoot and/or engineer solutions that would give industrial technology providers the highest potential for success. Such a team would provide the greatest possible down-side protection for high-risk advanced drop-in biofuels procurement(s).

  6. Geometrical gauge factor of directional electric potential drop sensors for creep monitoring

    SciTech Connect (OSTI)

    Madhi, E.; Nagy, P. B.

    2011-06-23

    Directional electric potential drop measurements can be exploited for in-situ monitoring of creep in metals. The sensor monitors the variation in the ratio of the resistances measured simultaneously in the axial and lateral directions using a square-electrode configuration. This technique can efficiently separate the mostly isotropic common part of the resistivity variation caused by reversible temperature variations from the mostly anisotropic differential part caused by direct geometrical and indirect material effects of creep. Initially, this ratio is roughly proportional to the axial creep strain, while at later stages, the resistance ratio increases even faster with creep strain because of the formation of directional discontinuities such as preferentially oriented grain boundary cavities and multiple-site cracks in the material. Similarly to ordinary strain gauges, the relative sensitivity of the sensor is defined as a gauge factor that can be approximated as a sum of geometrical and material parts. This work investigated the geometrical gauge factor by analytical and experimental means. We found that under uniaxial stress square-electrode sensors exhibit geometrical gauge factors of about 4 and 5 in the elastic and plastic regimes, respectively, i.e., more than twice those of conventional strain gauges. Experimental results obtained on 304 stainless steel using a square-electrode electric potential drop creep sensor agree well with our theoretical predictions.

  7. National System Templates: Building Sustainable National Inventory...

    Open Energy Info (EERE)

    System Templates: Building Sustainable National Inventory Management Systems Jump to: navigation, search Tool Summary LAUNCH TOOL Name: National System Templates: Building...

  8. National Security Science | Los National Alamos Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    this Issue (pdf) In 2012 NSS received an NNSA Defense Programs AWARD OF EXCELLENCE National Security Science Mail Stop A142 Los Alamos National Laboratory Los Alamos, NM...

  9. Sandia National Laboratories | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    nuclear weapons Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge Sandia National Laboratories chemist Mark Allendorf, shown here at...

  10. Lawrence Livermore National Laboratory Lawrence Livermore National...

    National Nuclear Security Administration (NNSA)

    "Green" supercomputer reduces energy footprint by 75% "Green" supercomputer reduces energy footprint by 75% Lawrence Livermore National Laboratory Lawrence Livermore National ...

  11. National Laboratory Impact Initiative

    Broader source: Energy.gov [DOE]

    The National Laboratory Impact Initiative supports the relationship between the Office of Energy Efficiency & Renewable Energy and the national laboratory enterprise.  The national laboratories...

  12. National Security Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science National Security Science Latest Issue:July 2015 past issues All Issues submit National Security Science Showcasing Los Alamos National Laboratory's work on nuclear...

  13. National Security Science Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science NSS Archive National Security Science Latest Issue:July 2015 past issues All Issues submit National Security Science Archive National Security Science magazine...

  14. Discussion of Available Methods to Support Reviews of Spent Fuel Storage Installation Cask Drop Evaluations

    SciTech Connect (OSTI)

    Witte, M.

    2000-03-28

    Applicants seeking a Certificate of Compliance for an Independent Spent Fuel Storage Installation (ISFSI) cask must evaluate the consequences of a handling accident resulting in a drop or tip-over of the cask onto a concrete storage pad. As a result, analytical modeling approaches that might be used to evaluate the impact of cylindrical containers onto concrete pads are needed. One such approach, described and benchmarked in NUREG/CR-6608,{sup 1} consists of a dynamic finite element analysis using a concrete material model available in DYNA3D{sup 2} and in LS-DYNA,{sup 3} together with a method for post-processing the analysis results to calculate the deceleration of a solid steel billet when subjected to a drop or tip-over onto a concrete storage pad. The analysis approach described in NUREG/CR-6608 gives a good correlation of analysis and test results. The material model used for the concrete in the analyses in NUREG/CR-6608 is, however, somewhat troublesome to use, requiring a number of material constants which are difficult to obtain. Because of this a simpler approach, which adequately evaluates the impact of cylindrical containers onto concrete pads, is sought. Since finite element modeling of metals, and in particular carbon and stainless steel, is routinely and accurately accomplished with a number of finite element codes, the current task involves a literature search for and a discussion of available concrete models used in finite element codes. The goal is to find a balance between a concrete material model with a limited number of required material parameters which are readily obtainable, and a more complex model which is capable of accurately representing the complex behavior of the concrete storage pad under impact conditions. The purpose of this effort is to find the simplest possible way to analytically represent the storage cask deceleration during a cask tip-over or a cask drop onto a concrete storage pad. This report is divided into three sections

  15. National Security Complex | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Security Complex Y-12 National Security Complex Completes W69 Dismantlement

  16. Measurement of Interfacial Tension By Use of Pendant Drop Video Techniques

    Energy Science and Technology Software Center (OSTI)

    1992-06-26

    An instrument and associated software to measure the interfacial tension (IFT) of aqueous surfactant solutions and crude oil. The method involves injection of a drop of fluid (such as crude oil) into a second immiscible phase to determine the IFT between the two phases. The instrument is composed of an AT-class computer, optical cell, illumination, video camera and lens, video frame digitizer board, monitor, and software. The camera displays an image of the pendant dropmore » on the monitor, which is then processed by the frame digitizer board and non-proprietary software to determine the IFT. Several binary and ternary phase systems were taken from the literature and used to measure the precision and accuracy of the instrument in determining IFTs.« less

  17. Two-phase pressure drop across a hydrofoil-based micro pin device using R-123

    SciTech Connect (OSTI)

    Kosar, Ali [Mechatronics Engineering Program, Sabanci University, Orhanli, Tuzla, 34956 Istanbul (Turkey)

    2008-05-15

    The two-phase pressure drop in a hydrofoil-based micro pin fin heat sink has been investigated using R-123 as the working fluid. Two-phase frictional multipliers have been obtained over mass fluxes from 976 to 2349 kg/m{sup 2} s and liquid and gas superficial velocities from 0.38 to 1.89 m/s and from 0.19 to 24 m/s, respectively. It has been found that the two-phase frictional multiplier is strongly dependent on flow pattern. The theoretical prediction using Martinelli parameter based on the laminar fluid and laminar gas flow represented the experimental data fairly well for the spray-annular flow. For the bubbly and wavy-intermittent flow, however, large deviations from the experimental data were recorded. The Martinelli parameter was successfully used to determine the flow patterns, which were bubbly, wavy-intermittent, and spray-annular flow in the current study. (author)

  18. Statistics of voltage drop in distribution circuits: a dynamic programming approach

    SciTech Connect (OSTI)

    Turitsyn, Konstantin S

    2010-01-01

    We analyze a power distribution line with high penetration of distributed generation and strong variations of power consumption and generation levels. In the presence of uncertainty the statistical description of the system is required to assess the risks of power outages. In order to find the probability of exceeding the constraints for voltage levels we introduce the probability distribution of maximal voltage drop and propose an algorithm for finding this distribution. The algorithm is based on the assumption of random but statistically independent distribution of loads on buses. Linear complexity in the number of buses is achieved through the dynamic programming technique. We illustrate the performance of the algorithm by analyzing a simple 4-bus system with high variations of load levels.

  19. Doug Longman | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Nozzle Orifice Geometry Fuel Spray Modeling High-Fidelity Large Eddy Simulations (LES) Multi-Dimensional Modeling Simulation Approaches for Drop-in Biofuels Virtual Engine...

  20. National Postdoctoral Association | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Postdoctoral Association The National Postdoctoral Association (NPA) is a member-driven organization that provides a unique, national voice for postdoctoral scholars. Since 2003, we have taken on the ambitious agenda to enhance the quality of the postdoctoral experience in the U.S. We have assumed a leadership role in addressing the many issues confronting the postdoctoral community that are national in scope and requiring action beyond the local level. Read more. Argonne National Lab

  1. National Security Facility (NSF) | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security Facility (NSF) National Security Facility (NSF) Argonne National Laboratory's National Security Facility (NSF) is a flexible, state-of-the-art secure user facility that contains multiple national security networks, video teleconference capability, high-resolution graphics support, a fully powered and cooled data center, multi-level training facilities, and conferencing facilities. The NSF provides tools and resources to enable and strengthen connections between government

  2. Analysis for Eccentric Multi Canister Overpack (MCO) Drops at the Canister Storage Building (CSB) (CSB-S-0073)

    SciTech Connect (OSTI)

    HOLLENBECK, R.G.

    2000-06-07

    The purpose of this report is to investigate the potential for damage to the multi-canister overpack (MCO) during impact from an eccentric accidental drop onto the standard storage tube, overpack storage tube, service station or sampling/weld station. Damage to the storage tube and sample/weld station is beyond the scope of this report. The results of this analysis are required to show the following: (1) If a breach resulting in unacceptable release of contamination could occur in the MCO. (2) If the dropped MCO could become stuck in the storage tube after the drop. (3) Maximum deceleration of the spent nuclear fuel baskets. The model appropriate for the standard storage tubes with the smaller gap is the basis for the analysis and results reported herein in this SNF-5204, revision 2 report. Revision 1 of this report is based on a model that includes the larger gap appropriate for the overpack tubes.

  3. CX-005134: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Provision of Funds to the Yakama Nation for the Purchase of Three Parcels of Property Along Reecer CreekCX(s) Applied: B1.25Date: 01/28/2011Location(s): Kittitas County, WashingtonOffice(s): Bonneville Power Administration

  4. EA-1998: Upper Columbia Spring Chinook and Steelhead Acclimation Project, Chelan County, Washington

    Broader source: Energy.gov [DOE]

    BPA is preparing an EA that will analyze the potential impacts of a proposal to fund the Yakama Nation to improve, develop, and use fish rearing acclimation ponds for hatchery raised steelhead and Chinook salmon in the Methow and Wenatchee watersheds. Additional information is available at http://efw.bpa.gov/environmental_services/Document_Library/ChinookSteelh....

  5. Los Alamos National Lab: National Security Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more.. Charlie McMillan, Director of Los Alamos National Laboratory 1:08 Charlie McMillan, Director of Los Alamos National Laboratory, describes how the Lab provides...

  6. National Ignition Facility | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    National Ignition Facility Glass amplifiers in Laser Bay 2 at the National Ignition Facility. The construction of the 192-beam 1.8 MJ UV NIF, the world's most energetic laser, was ...

  7. National Security Photo Gallery | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Competition | National Nuclear Security Administration | (NNSA) Solicitation National Security Campus Management and Operating (M&O) Contract Competition Contract Competition Home Page Welcome to the National Nuclear Security Administration's website for the National Security Campus (NSC) Management and Operating Contract Competition. The NSC in Kansas City, MO, is situated on approximately 177 acres. The facility is leased for the NNSA by the General Services Administration. Satellite

  8. National Laboratory]; Chertkov, Michael [Los Alamos National...

    Office of Scientific and Technical Information (OSTI)

    Chertkov, Michael Los Alamos National Laboratory Construction and Facility Engineering; Energy Conservation, Consumption, & Utilization(32); Energy Planning, Policy, &...

  9. Chemist, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Chemist, Sandia National Laboratories Jerilyn Timlin Jerilyn Timlin October 2009 National Institutes of Health (NIH) New Innovator Award Jerilyn Timlin, a chemist at Sandia National Laboratories, has been presented by the National Institutes of Health (NIH) with a New Innovator Award, one of 55 such awards granted by the NIH this year. The award encourages researchers to explore bold ideas that have the potential to catapult fields forward and speed the translation of

  10. Cognitive Informatics, Pacific Northwest National Laboratory | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Cognitive Informatics, Pacific Northwest National Laboratory Frank Greitzer Frank Greitzer Frank Greitzer was invited to be one of six "provocateurs," selected internationally by the National Science Foundation (NSF) and the National Institute of Standards and Technology (NIST), to participate in planning of, and present to a National Academies workshop on Usability, Security, and Privacy of Computer Systems Workshop held July 20-22, 2009 in

  11. Sandia National Laboratories: National Security Programs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Weapons Defense Systems International, Homeland, & Nuclear Security Energy and Climate Facebook Twitter YouTube Flickr RSS Programs National Security Programs We strive to become the laboratory that the U.S. turns to first for technology solutions to the most challenging problems that threaten peace and freedom for our nation and the globe. At Sandia, national security is our business. We apply advanced science and engineering to help our nation and allies detect, repel, defeat, or

  12. Lawrence Berkeley National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Berkeley National Laboratory NNSA engineer teaches young people STEM, makes mark on Livermore lab communities. Rick Roses Job: Federal fire protection engineer and explosives safety engineer Educational background: Bachelor's degree in mechanical engineering, University of California, Berkeley (1984) and a master's in national resource strategy, National Defense University (2010). Rick Roses,... Lab employees, officials, business leaders dedicate Livermore Solar Center

  13. Diamond formation due to a pH drop during fluid–rock interactions

    SciTech Connect (OSTI)

    Sverjensky, Dimitri A.; Huang, Fang

    2015-11-03

    Diamond formation has typically been attributed to redox reactions during precipitation from fluids or magmas. Either the oxidation of methane or the reduction of carbon dioxide has been suggested, based on simplistic models of deep fluids consisting of mixtures of dissolved neutral gas molecules without consideration of aqueous ions. The role of pH changes associated with water–silicate rock interactions during diamond formation is unknown. Here we show that diamonds could form due to a drop in pH during water–rock interactions. We use a recent theoretical model of deep fluids that includes ions, to show that fluid can react irreversibly with eclogite at 900 °C and 5.0 GPa, generating diamond and secondary minerals due to a decrease in pH at almost constant oxygen fugacity. Overall, our results constitute a new quantitative theory of diamond formation as a consequence of the reaction of deep fluids with the rock types that they encounter during migration. Diamond can form in the deep Earth during water–rock interactions without changes in oxidation state.

  14. Diamond formation due to a pH drop during fluid–rock interactions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sverjensky, Dimitri A.; Huang, Fang

    2015-11-03

    Diamond formation has typically been attributed to redox reactions during precipitation from fluids or magmas. Either the oxidation of methane or the reduction of carbon dioxide has been suggested, based on simplistic models of deep fluids consisting of mixtures of dissolved neutral gas molecules without consideration of aqueous ions. The role of pH changes associated with water–silicate rock interactions during diamond formation is unknown. Here we show that diamonds could form due to a drop in pH during water–rock interactions. We use a recent theoretical model of deep fluids that includes ions, to show that fluid can react irreversibly withmore » eclogite at 900 °C and 5.0 GPa, generating diamond and secondary minerals due to a decrease in pH at almost constant oxygen fugacity. Overall, our results constitute a new quantitative theory of diamond formation as a consequence of the reaction of deep fluids with the rock types that they encounter during migration. Diamond can form in the deep Earth during water–rock interactions without changes in oxidation state.« less

  15. Drop mass transfer in a microfluidic chip compared to a centrifugal contactor

    SciTech Connect (OSTI)

    Nemer, Martin B.; Roberts, Christine C.; Hughes, Lindsey G.; Wyatt, Nicholas B.; Brooks, Carlton F.; Rao, Rekha

    2014-06-13

    A model system was developed for enabling a multiscale understanding of centrifugal-contactor liquid–liquid extraction.The system consisted of Nd(III) + xylenol orange in the aqueous phase buffered to pH =5.5 by KHP, and dodecane + thenoyltrifluroroacetone (HTTA) + tributyphosphate (TBP) in the organic phase. Diffusion constants were measured for neodymium in both the organic and aqueous phases, and the Nd(III) partition coefficients were measured at various HTTA and TBP concentrations. A microfluidic channel was used as a high-shear model environment to observe mass-transfer on a droplet scale with xylenol orange as the aqueous-phase metal indicator; mass-transfer rates were measured quantitatively in both diffusion and reaction limited regimes on the droplet scale. Lastly, the microfluidic results were comparable to observations made for the same system in a laboratory scale liquid–liquid centrifugal contactor, indicating that single drop microfluidic experiments can provide information on mass transfer in complicated flows and geometries.

  16. Characterization of Vertical Velocity and Drop Size Distribution Parameters in Widespread Precipitation at ARM Facilities

    SciTech Connect (OSTI)

    Giangrande S. E.; Luke, E. P.; Kollias, P.

    2012-02-01

    Extended, high-resolution measurements of vertical air motion and median volume drop diameter D0 in widespread precipitation from three diverse Atmospheric Radiation Measurement Program (ARM) locations [Lamont, Oklahoma, Southern Great Plains site (SGP); Niamey, Niger; and Black Forest, Germany] are presented. The analysis indicates a weak (0-10 cm{sup -1}) downward air motion beneath the melting layer for all three regions, a magnitude that is to within the typical uncertainty of the retrieval methods. On average, the hourly estimated standard deviation of the vertical air motion is 0.25 m s{sup -1} with no pronounced vertical structure. Profiles of D0 vary according to region and rainfall rate. The standard deviation of 1-min-averaged D0 profiles for isolated rainfall rate intervals is 0.3-0.4 mm. Additional insights into the form of the raindrop size distribution are provided using available dual-frequency Doppler velocity observations at SGP. The analysis suggests that gamma functions better explain paired velocity observations and radar retrievals for the Oklahoma dataset. This study will be useful in assessing uncertainties introduced in the measurement of precipitation parameters from ground-based and spaceborne remote sensors that are due to small-scale variability.

  17. Drop mass transfer in a microfluidic chip compared to a centrifugal contactor

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Nemer, Martin B.; Roberts, Christine C.; Hughes, Lindsey G.; Wyatt, Nicholas B.; Brooks, Carlton F.; Rao, Rekha

    2014-06-13

    A model system was developed for enabling a multiscale understanding of centrifugal-contactor liquid–liquid extraction.The system consisted of Nd(III) + xylenol orange in the aqueous phase buffered to pH =5.5 by KHP, and dodecane + thenoyltrifluroroacetone (HTTA) + tributyphosphate (TBP) in the organic phase. Diffusion constants were measured for neodymium in both the organic and aqueous phases, and the Nd(III) partition coefficients were measured at various HTTA and TBP concentrations. A microfluidic channel was used as a high-shear model environment to observe mass-transfer on a droplet scale with xylenol orange as the aqueous-phase metal indicator; mass-transfer rates were measured quantitatively inmore » both diffusion and reaction limited regimes on the droplet scale. Lastly, the microfluidic results were comparable to observations made for the same system in a laboratory scale liquid–liquid centrifugal contactor, indicating that single drop microfluidic experiments can provide information on mass transfer in complicated flows and geometries.« less

  18. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration | (NNSA) Los Alamos National Lab Performance Evaluations FY 2016 FY 2016 Performance Evaluation Plan, Los Alamos National Security, LLC FY 2015 FY 2015 Performance Evaluation Report, Los Alamos National Security, LLC FY 2015 Performance Evaluation Report, Fee Determination Letter, Los Alamos National Security, LLC FY 2015 Performance Evaluation Plan, Los Alamos National Security, LLC FY 2014 FY 2014 Performance Evaluation Report, Los Alamos National Security, LLC FY 2014

  19. National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Prepared by U.S. Department of Energy National Nuclear Security Administration Nevada Field Office . Environmental Management Operations February 2015 Nevada National Security ...

  20. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy National Nuclear Security Administration Federal Equal ... A. Name and Address of Agency National Nuclear Security Administration Office of ...

  1. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    U.S. Department of Energy National Nuclear Security Administration Federal Equal ... A. Name and Address of Agency National Nuclear Security Administration 1000 Independence ...

  2. National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    15 National Nuclear Security Administration FY 2013 PER Babcock & Wilcox Technical ... The National Nuclear Security Administration (NNSA) Production Office (NPO) took into ...

  3. First National Technology Center

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    First National Technology First National Technology Center Center Electronic Equipment - manufactured to withstand 8 milliseconds of voltage disruption CBEMA Curve - Chips ...

  4. Level: National Data;

    U.S. Energy Information Administration (EIA) Indexed Site

    (Fuel and Nonfuel), 2006; Level: National Data; Row: Energy Sources and Shipments, ... (Fuel and Nonfuel), 2006; Level: National Data; Row: Energy Sources and Shipments, ...

  5. National Science Bowl Finals

    ScienceCinema (OSTI)

    None

    2010-09-01

    National Science Bowl finals and awards at the National Building Museum in Washington D.C. Monday 5/3/2010

  6. Final Notice of Violation issued to Los Alamos National Security, LLC

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 28, 2015 VIA OVERNIGHT CARRIER Dr. Charles F. McMillan, President Los Alamos National Security, LLC Los Alamos National Laboratory Mailstop A 100, Drop Point 31 S Bikini Atoll Road, TA-3 Los Alamos, New Mexico 87545-1663 SEA-2015-02 (FNOV) Dear Dr. McMillan: Pursuant to section 234B of the Atomic Energy Act of 1954, as amended (the Act), 42 U.S.C. § 2282b, and the Department of Energy (DOE) regulations at //IA. **~~If~ llV~~~*41\ National Nuclear Security Administration 10 C.F.R. Part 824,

  7. Latest Report Shows Cost of Going Solar has Dropped Significantly for 5 Years

    Broader source: Energy.gov [DOE]

    Lawrence Berkeley National Lab today released the eighth installment of the Tracking the Sun report series, which is funded by the U.S. Department of Energy SunShot Initiative. The report shows that the installed price of distributed solar photovoltaic (PV) power systems in the United States continues to fall precipitously, especially in the last 5 years.

  8. Lawrence Livermore National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Lawrence Livermore National Laboratory Lawrence Livermore National Laboratory (LLNL) is a design laboratory that is responsible for the safety and reliability of the nuclear explosives package in nuclear weapons. It supports surveillance, assessment, and refurbishment of the nuclear weapons stockpile. LLNL also possesses unique high-energy-density physics capabilities and scientific computing assets. The lab is managed by Lawrence Livermore National Security, LLC and

  9. National Nuclear Security Administration Los Alamos National

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Los Alamos National Security, LLC Fiscal Year 2014 Performance Evaluation Report (PER) NNSA Los Alamos Field Office Performance Period: October 2013 - September 2014 November 14, 2014 NA-LA November 14, 2014 Executive Summary This Performance Evaluation Report (PER) provides the assessment of Los Alamos National Security, LLC performance for the period of October 1, 2013 through September 30, 2014, as evaluated against the objectives defined in the Fiscal

  10. National Science Bowl | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Science Bowl Texas students win regional National Science Bowl competition, secure spot in finals in nation's capital More than 200 students from 37 from High schools across the Texas Panhandle gathered together with a few hundred volunteers for a meeting and competition of the minds: The Pantex Science Bowl 2016. Set up like a game show with buzzers, toss up and bonus questions, these groups of four students... Amarillo Students Win Regional National Science Bowl Competition, Secure Spot in

  11. sandia national laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national laboratory Sandia California celebrates 60 years On March 8, Sandia/California celebrates its 60th anniversary. The site, which began with a singular nuclear weapons mission, now supports all Sandia mission areas. Nuclear weapons still accounts for nearly half of the site's work, along with strong programs in homeland security, transportation... Managing the data deluge for national security analysts ALBUQUERQUE, N.M. - After a disaster or national tragedy, bits of information

  12. Engineer, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Engineer, Sandia National Laboratories Clifford Ho Clifford Ho February 2010 Asian American Engineer of the Year Clifford Ho, a Sandia engineer, has been selected by the Chinese Institute of Engineers - USA to receive the Asian American Engineer of the Year Award. The honor is presented each year to the nation's most outstanding Asian American engineers and scientists who make significant, lasting and global contributions to the nation. Ho was recognized for his

  13. Lawrence Livermore National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Lawrence Livermore National Laboratory Lawrence Livermore National Laboratory DE-AC52-07NA27344 Operated by Lawrence Livermore National Security, LLC BASIC Contract (Official) Modifications (Official) Funding Mods Available Upon Request Conformed Contract (Unofficial) LLNL Sec A (SF33) (pdf, 91KB) See Modifications Section under Conformed Contract Link LLNS Conformed Contract (weblink) LLNL Sec B-H (pdf, 306KB) LLNL Sec I pdf 687KB LLNL Sec J Appx A (pdf, 67KB) LLNL

  14. Pacific Northwest National Laboratory | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Pacific Northwest National Laboratory NNSA deputy visits PNNL to see radiochemistry and threat detection capabilities NNSA Principal Deputy Administrator Madelyn Creedon visited the Pacific Northwest National Laboratory (PNNL) in Washington this month to see the work it does for the agency, focusing on radiochemistry and threat detection. NNSA hosts international CTBT on-site inspection experts at Nevada National Security Site This month, NNSA hosted a Comprehensive

  15. national security | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    security Klotz visits Y-12 to see progress on new projects and ongoing work on NNSA's national security missions Last week, NNSA Administrator Lt. Gen. Frank Klotz (Ret.) visited the Y-12 National Security Complex to check on the status of ongoing projects like the Uranium Processing Facility as well as the site's continuing uranium operations. He also met with the Region 2 volunteers of the Radiogical... Managing the data deluge for national security analysts ALBUQUERQUE, N.M. - After a

  16. National Lab Impact Initiative

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lab Impact Initiative Energy Efficiency & Renewable Energy EERE National Lab Impact Summit Driving American Energy Innovation and Competitiveness May 4, 2016 | 7:30 am-7:00 pm National Renewable Energy Laboratory Golden, Colorado EERE National Lab Impact Summit // i ` http://www.cyclotronroad.org/home TABLE OF CONTENTS Department of Energy National Lab Abbreviations .........................................................................................................ii Welcome Letter

  17. First National Technology Center

    Office of Energy Efficiency and Renewable Energy (EERE)

    Speaker presentation prepared by Dennis Hughes, a lead property manager with First National Buildings Inc.

  18. national labs | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    and hackers engage innovation and partnerships NNSA's labs change the world everyday through cutting-edge developments in support of NNSA's critical national security missions. ...

  19. National Nuclear Security Administration | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) National Nuclear Security Administration FY15 Year End Report Semi Annual Report FY14 Year End Report Semi Annual

  20. National Security Science | Los National Alamos Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANSCE: Mission-Critical for National Security Nuclear Energy for Our Challenging Future The Invisible Neutron Threat Blasting Missiles Out of the Sky LANL and the Air Force: ...

  1. National Renewable Energy Laboratory | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    National Renewable Energy Laboratory NNSA lab recognized for innovation to power electric ... Annual Merit Review Awards recognized significant achievements in the Department of Energy

  2. National Ignition Facility Reaches Milestone Early | National...

    National Nuclear Security Administration (NNSA)

    Reaches Milestone Early | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the...

  3. Previous Sandia National Laboratories | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Apply for Our Jobs Our Jobs Working at NNSA Blog Home About Us Our Operations Acquisition and Project Management M & O Support Department Sandia National Laboratories ...

  4. Sandia National Laboratory Performance Evaluations | National...

    National Nuclear Security Administration (NNSA)

    Sandia National Laboratory Performance Evaluations FY 2016 FY 2016 Performance Evaluation Plan, Sandia Corporation FY 2015 FY 2015 Performance Evaluation Report, Sandia Corporation ...

  5. Lawrence Livermore National Laboratory | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    Life Extension Program Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge SOLAR POWER PURCHASE FOR DOE LABORATORIES More about LLNL...

  6. sandia national lab | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national lab NNSA Researchers Advance Technology for Remote Reactor Monitoring NNSA's Defense Nuclear Nonproliferation Research and Development Program drives the innovation ...

  7. Manager, Sandia National Laboratories | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    of New Mexico's Anderson School of Management's Hall of Fame Inductee Jim Novak from Sandia National Laboratories will be inducted into the University of New Mexico's ...

  8. Researcher, Sandia National Laboratories | National Nuclear Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories Award: Fellow of the Institute of Electrical & Electronics Engineers (IEEE) Profile: Paul Dodd, a Sandia National Laboratories researcher, has been named a Fellow...

  9. National Security, Weapons Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Security, Weapons Science National Security, Weapons Science National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. CoMuEx» Explosives Center» Dual-Axis Radiographic Hydrodynamic Test Facility (DARHT) The Dual-Axis Radiographic Hydrodynamic Test Facility at Los Alamos National Laboratory is part of the DOE's stockpile stewardship

  10. Foreign-national Investigators

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    foreign national investigators Foreign-national Investigators Foreign National Investigators must have access to B174 shown on their badge. Foreign National Investigators must notify Beth Mariotti by e-mail of their first intended presence in B174. By September 2009, it is expected that there will be no restrictions on computer use by Foreign National Investigators at JLF. However, LLNL prohibits the use of personally-owned computers on-site

  11. Building America Case Study: Duct in Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-09-01

    Forced air distribution systems (duct systems) typically are installed out of sight for aesthetic reasons, most often in unconditioned areas such as an attic or crawlspace. Any leakage of air to or from the duct system (duct leakage) in unconditioned space not only loses energy, but impacts home and equipment durability and indoor air quality. An obvious solution to this problem is to bring the duct system into the interior of the house, either by sealing the area where the ducts are installed (sealed attic or crawlspace) or by building an interior cavity or chase above the ceiling plane (raised ceiling or fur-up chase) or below the ceiling plane (dropped ceiling or fur-down) for the duct system. This case study examines one Building America builder partner's implementation of an inexpensive, quick and effective method of building a fur-down or dropped ceiling chase.

  12. Analysis for Eccentric Multi Canister Overpack (MCO) Drops at the Canister Storage Building (CSB) (CSB-S-0073)

    SciTech Connect (OSTI)

    TU, K.C.

    1999-10-08

    Multi-Canister Overpacks (MCOs) containing spent nuclear fuel (SNF) will be routinely handled at the Canister Storage Building (CSB) during fuel movement operations in the SNF Project. This analysis was performed to investigate the potential for damage from an eccentric accidental drop onto the standard storage tube, overpack tube, service station, or sample/weld station. Appendix D was added to the FDNW document to include the peer Review Comment Record & transmittal record.

  13. An experimental study on the uptake factor of tungsten oxide particles resulting from an accidentally dropped storage container

    SciTech Connect (OSTI)

    Gao, Zhi; Zhang, J. S.; Byington, Jerry G.A.

    2013-05-16

    A test procedure was developed and verified to measure the airborne concentrations of particles of different sizes (0.5–20 μm) within the vicinity of a dropped container when a significant portion of the tungsten oxide powder (simulating uranium oxide) is ejected from the container. Tests were carried out in a full-scale stainless steel environmental chamber with an interior volume of 24.1 m3. Thirty-two drop tests were performed, covering variations in dropping height, room air movement, landing scenario, and lid condition. Assuming a breathing rate of 1.2 m3/hr, the uptake factor during the first 10 min was calculated to be between 1.13 × 10–9 and 1.03 × 10–7 in reference to the amount loaded; or between 6.44 × 10–8 and 3.55 × 10–4 in reference to the amount spilled. Results provide previously unavailable data for estimating the exposure and associated risk to building occupants in the case of an accidental dropping of heavy powder containers. The test data show that for spills larger than 0.004 g, the power-law correlation between the spill uptake factor and the spilled mass (i.e., SUF = 2.5 × 10–5 × Spill_Mass–0.667) established from the test data is smaller and a more accurate estimate than the constant value of 10–3 assumed in the Department of Energy Nuclear Material Packaging Manual. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplementary resource: an online supplementary table of all cumulative uptake amounts at 10 min for all test data.

  14. National Supplemental Screening Program | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Supplemental Screening Program The National Supplemental Screening Program (NSSP) offers medical screenings at no charge for former U.S. Department of Energy (DOE) site workers who may have been exposed to hazardous substances at work. For more information, see the documents below. PDF icon Retiree_Benefits_NSSPbrochure.pdf PDF icon Retiree_Benefits_newtest.pdf PDF icon Retiree_Benefits_NSSPemployees

  15. Argonne National Laboratory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Argonne National Laboratory First-of-its-Kind NNSA Capability to Support Study of Materials at Extreme Conditions for Stockpile Stewardship WASHINGTON - A new first-of-its-kind-worldwide research capability will help unravel the mysteries of material behavior at extreme conditions and short time scales in support of the Department of Energy's National Nuclear Security Administration's (DOE/NNSA's) vital

  16. Sandia National Laboratories: Sandia National Laboratories: Missions:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Defense Systems & Assessments: Accomplishments Accomplishments About Defense Systems & Assessments Program Areas Accomplishments Archives Cybersecurity Programs Accomplishments Protecting the nation Sandia lasers test and calibrate sensors on U.S. satellites Sandia's scientists and engineers have a significant impact on national security and continually deliver results, including these noteworthy successes from fiscal year 2012: AHW Launch Advanced Hypersonic Weapon test flight

  17. sandia national labotartory | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sandia national labotartory Sandia National Laboratory Sandia Field Office Contact the Field Office Contract Administration & Business Management Emergency Information Facilities & Projects Nuclear Operations Environment, Safety & Health Public Affairs Safeguards & Security Performance and Quality Assurance Programs NEPA Reading Room

  18. Measurement of the high-field Q drop in the TM010 and TE011 modes in a niobium cavity

    SciTech Connect (OSTI)

    Gianluigi Ciovati; Peter Kneisel

    2006-04-01

    In the last few years superconducting radio-frequency (rf) cavities made of high-purity (residual resistivity ratio>200) niobium achieved accelerating gradients close to the theoretical limits. An obstacle towards achieving reproducibly higher fields is represented by ''anomalous'' losses causing a sharp degradation of the cavity quality factor when the peak surface magnetic field (Bp) is above about 90 mT, in the absence of field emission. This effect, called ''Q drop'' has been measured in many laboratories with single- and multicell cavities mainly in the gigahertz range. In addition, a low-temperature (100-140 C) ''in situ'' baking of the cavity was found to be beneficial in reducing the Q drop. In order to gain some understanding of the nature of these losses, a single-cell cavity has been tested in the TM010 and TE011 modes at 2 K. The feature of the TE011 mode is to have zero electric field on the cavity surface, so that electric field effects can be excluded as a source for the Q drop. This article will present some of the experimental results for different cavity treatments and will compare them with existing models.

  19. WE-A-17A-09: Exploiting Electromagnetic Technologies for Real-Time Seed Drop Position Validation in Permanent Implant Brachytherapy

    SciTech Connect (OSTI)

    Racine, E; Hautvast, G; Binnekamp, D; Beaulieu, L

    2014-06-15

    Purpose: To report on preliminary results validating the performance of a specially designed LDR brachytherapy needle prototype possessing both electromagnetic (EM) tracking and seed drop detection abilities. Methods: An EM hollow needle prototype has been designed and constructed in collaboration with research partner Philips Healthcare. The needle possesses conventional 3D tracking capabilities, along with a novel seed drop detection mechanism exploiting local changes of electromagnetic properties generated by the passage of seeds in the needle's embedded sensor coils. These two capabilities are exploited by proprietary engineering and signal processing techniques to generate seed drop position estimates in real-time treatment delivery. The electromagnetic tracking system (EMTS) used for the experiment is the NDI Aurora Planar Field Generator. The experiment consisted of dropping a total of 35 seeds in a prismatic agarose phantom, and comparing the 3D seed drop positions of the EMTS to those obtained by an image analysis of subsequent micro-CT scans. Drop position error computations and statistical analysis were performed after a 3D registration of the two seed distributions. Results: Of the 35 seeds dropped in the phantom, 32 were properly detected by the needle prototype. Absolute drop position errors among the detected seeds ranged from 0.5 to 4.8 mm with mean and standard deviation values of 1.6 and 0.9 mm, respectively. Error measurements also include undesirable and uncontrollable effects such as seed motion upon deposition. The true accuracy performance of the needle prototype is therefore underestimated. Conclusion: This preliminary study demonstrates the potential benefits of EM technologies in detecting the passage of seeds in a hollow needle as a means of generating drop position estimates in real-time treatment delivery. Such tools could therefore represent a potentially interesting addition to existing brachytherapy protocols for rapid dosimetry

  20. Engineer, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) Engineer, Sandia National Laboratories Sandra Begay-Campbell Sandra Begay-Campbell Ely S. Parker Award Sandra Begay-Campbell, a Sandia National Laboratories engineer and a member of the Navajo Nation, was selected for the prestigious Ely S. Parker Award by the American Indian Science and Engineering Society at an honors banquet Oct. 31 in Portland, Ore. Begay-Campbell, who has worked at Sandia for 17 years and is a principal member of the technical staff, received the

  1. National Environmental Research Parks

    SciTech Connect (OSTI)

    Not Available

    1994-07-01

    The National Environmental Research Parks are outdoor laboratories that provide opportunities for environmental studies on protected lands that act as buffers around Department of Energy (DOE) facilities. The research parks are used to evaluate the environmental consequences of energy use and development as well as the strategies to mitigate these effects. They are also used to demonstrate possible environmental and land-use options. The seven parks are: Fermilab National Environmental Research Park; Hanford National Environmental Research Park; Idaho National Environmental Research Park; Los Alamos National Environmental Research Park; Nevada National Environmental Research Park; Oak Ridge National Environmental Research Park; and Savannah River National Environmental Research Park. This document gives an overview of the events that led to the creation of the research parks. Its main purpose is to summarize key points about each park, including ecological research, geological characteristics, facilities, and available databases.

  2. Nevada National Security Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 24, 2014 Cultural Artifacts Cross Eras at the Nevada National Security Site It is well known that the Nevada National Security Site (NNSS) is home to many artifacts from the ...

  3. National Energy Education Summit

    Broader source: Energy.gov [DOE]

    The National Energy Education Summit is organized by the Council of Energy Research and Education Leaders (CEREL) and will serve as a first-of-its-kind national forum for energy educators, subject...

  4. Sandia National Laboratories

    National Nuclear Security Administration (NNSA)

    feet underground.

    Bay Area national labs team to tackle long-standing automotive hydrogen storage challenge http:www.nnsa.energy.govblogbay-area-national-labs-team-tackle-...

  5. nevada national security site

    National Nuclear Security Administration (NNSA)

    7%2A en Nevada National Security Site operator recognized for green fleet http:www.nnsa.energy.govblognevada-national-security-site-operator-recognized-green-fleet

    The...

  6. 2012 National Electricity Forum

    Broader source: Energy.gov [DOE]

    At the 2012 National Electricity Forum, held February 8-9, 2012 and jointly organized by DOE's Office of Electricity Delivery & Energy Reliability (OE) and the National Association of...

  7. Nevada National Security Site

    Office of Energy Efficiency and Renewable Energy (EERE)

    HISTORYIn 1950, President Truman established what is now known as the Nevada National Security Site (NNSS) to perform nuclear weapons testing activities.  In support of national defense initiatives...

  8. National Geothermal Summit

    Broader source: Energy.gov [DOE]

    The Geothermal Energy Association (GEA) will be holding it’s fifth annual National Geothermal Summit on June 3-4 at the Grand Sierra Resort and Casino in Reno, NV. The National Geothermal Summit is...

  9. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    participates in National Lab Day to increase awareness of science across the nation April 29, 2010 Events planned May 4-5 at Bradbury Science Museum LOS ALAMOS, New Mexico, April...

  10. Photos | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -Arms control & nonproliferation --Research reactor conversion -Biometrics -Biotechnology for national security -Cyber security -Facility security -Decision science ...

  11. Videos | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -Arms control & nonproliferation --Research reactor conversion -Biometrics -Biotechnology for national security -Cyber security -Facility security -Decision science ...

  12. National Hydropower Map

    Broader source: Energy.gov [DOE]

    High-resolution map produced by Oak Ridge National Laboratory showing hydropower resources throughout the United States.

  13. Management | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemical Sciences & Engineering Focus: Understanding & Control of Interfacial Processes Web Site Michael Thackeray Michael Thackeray (Deputy Director) Argonne National Laboratory...

  14. Facilities | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities Some of the nation's most powerful and sophisticated facilities for energy research Argonne National Laboratory is home to some of the nation's most powerful and sophisticated research facilities. As a U.S. Department of Energy national laboratory, Argonne offers access to the facilities listed below through a variety of arrangements. Advanced Powertrain Research Facility Center for Transportation Research Materials Engineering Research Facility Distributed Energy Research Center

  15. Seneca Nation- 2007 Project

    Broader source: Energy.gov [DOE]

    On the three territories of the Seneca Nation, there exist opportunities for energy development from both renewable and nonrenewable resources.

  16. National User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National User Facilities Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions Berkeley Lab's User Facilities-Engines of Discovery Berkeley Lab's User Facilities provide state-of-the-art resources for scientists across the nation and around the world. About 10,000 researchers a year use these facilities, representing nearly one third of the total for all Department of Energy

  17. National Renewable Energy Laboratory

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Energy Program Review Roger Taylor Manger State, Local & Tribal Integrated Application Group National Renewable Energy Laboratory November 5-8, 2007 Major DOE National Laboratories Brookhaven Brookhaven Pacific Northwest Pacific Northwest Lawrence Berkeley Lawrence Berkeley Lawrence Livermore Lawrence Livermore h h h h h INEL INEL National Renewable National Renewable Energy Laboratory Energy Laboratory Los Alamos Los Alamos Sandia Sandia Argonne Argonne Oak Ridge Oak Ridge Defense

  18. Los Alamos National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists will codirect $14.5 million National Center for Systems Biology July 28, 2009 Lab contributes computer modeling, antibody engineering capabilities Los Alamos, New Mexico, July 28, 2009- Los Alamos National Laboratory scientists will codirect a new National Center for Systems Biology located at the University of New Mexico in Albuquerque. The new Spatiotemporal Modeling Center (STMC) is funded by a $14.5 million, five- year grant from the National Institute for General Medical Sciences

  19. Alamos National Laboratory's 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .1 million pledged during Los Alamos National Laboratory's 2013 employee giving campaign December 17, 2012 LOS ALAMOS, NEW MEXICO, December 17, 2012-Los Alamos National Laboratory employees have again demonstrated concern for their communities and those in need by pledging a record $2.13 million to United Way and other eligible nonprofit programs. Los Alamos National Security, LLC, which manages and operates the Laboratory for the National Nuclear Security Administration, plans to prorate its $1

  20. Alamos National Security, LLC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Eleven nonprofit organizations receive community giving grants from Los Alamos National Security, LLC December 15, 2009 Los Alamos, New Mexico, December 15, 2009- Eleven local nonprofit organizations with projects supported by Los Alamos National Laboratory employee volunteers received $75,000 in Community Giving grants from Los Alamos National Security, LLC, the company that manages the Lab for the National Nuclear Security Administration. The organizations are located in Los Alamos, Española,

  1. National SCADA Testbed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Photovoltaic Systems Evaluation Laboratory PV Regional ... Facility Geomechanics and Drilling Labs National ... Health Monitoring Offshore Wind High-Resolution ...

  2. Downloads | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    --Environmental policy & planning --Geochemistry ... -Decision science --Emergency & disaster management ... the nation to solve society's complex scientific problems. ...

  3. National Geothermal Summit

    Broader source: Energy.gov [DOE]

    The Geothermal Energy Association hosts its annual National Geothermal Summit in Reno, Nevada, June 3-4, 2015.

  4. NATIONAL SECURITY TECHNOLOGIES - NEVADA NATIONAL SECURITY SITE

    National Nuclear Security Administration (NNSA)

    - NEVADA NATIONAL SECURITY SITE FISCAL YEARS 2009 THRU 2015 SMALL BUSINESS PROGRAM RESULTS & FORECAST CATEGORY Total Procurement Total SB Small Disad. Bus Woman-Owned SB Hub-Zone ...

  5. lasers. National Ignition Facility | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    target shot of fiscal year 2015 WASHINGTON - Last week, the National Ignition Facility (NIF) fired its 300th laser target shot in fiscal year (FY) 2015, meeting the year's goal...

  6. National SCADA Test Bed

    Broader source: Energy.gov [DOE]

    The National SCADA Test Bed (NSTB) is a one-of-a-kind national resource that draws on the integrated expertise and capabilities of the Argonne, Idaho, Lawrence Berkeley, Los Alamos, Oak Ridge, Pacific Northwest, and Sandia National Laboratories to address the cybersecurity challenges of energy delivery systems.

  7. Sandia National Laboratory | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratory NNSA's Sandia National Laboratories are responsible for the development, testing, and production of specialized nonnuclear components and quality assurance and systems engineering for all of the United States' nuclear weapons. Sandia has locations in Albuquerque, New Mexico; Livermore, California; Kauai, Hawaii; and Tonopah, Nevada. Sandia Field Office Contact the Field Office Contract Administration & Business Management Emergency Information Facilities

  8. Sandia National Laboratories | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Sandia National Laboratories Sandia employee dubbed a master at locking down NNSA's enterprise NNSA's primary missions include keeping dangerous materials out of the wrong hands while protecting and maintaining the nation's nuclear deterrent. It's no surprise, then, that NNSA's labs and sites employ the best experts available in security. At NNSA's Sandia... On Womens Equality Day, we celebrate NNSA's talented Women in STEM Sandia California hosts Military Academic Collaboration students Sandia

  9. Sandia National Laboratories | National Nuclear Security Administration |

    National Nuclear Security Administration (NNSA)

    (NNSA) Sandia National Laboratories NNSA's Sandia National Laboratories are responsible for the development, testing, and production of specialized nonnuclear components and quality assurance and systems engineering for all of the United States' nuclear weapons. Sandia has locations in Albuquerque, NM; Livermore, CA; Kauai, HI; and Tonopah, NV. The labs are operated by Sandia Corporation. Visit our website Z-Machine Z-Machine Related News Sandia employee dubbed a master at locking down

  10. Physicist, Lawrence Livermore National Laboratory | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Physicist, Lawrence Livermore National Laboratory Kennedy Reed Kennedy Reed July 2009 Presidential Award for Excellence in Science and Engineering Mentoring President Obama has named Lawrence Livermore National Laboratory physicist Kennedy Reed as a recipient of the prestigious Presidential Award for Excellence in Science and Engineering Mentoring. Reed is a theoretical physicist at the laboratory, conducting research on atomic collisions in high temperature