National Library of Energy BETA

Sample records for xxx xx xx

  1. DOE O XXX.X DRAFT XX-XX-XX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE O XXX.X DRAFT XX-XX-XX 4 DOE O XXX.X DRAFT XX-XX-XX DOE O XXX.X 3 DRAFT XX-XX-XX DOE O XXX.X Appendix A DRAFT XX-XX-XX A- 1 (and A-2) DOE O XXX.X Attachment 1 DRAFT XX-XX-XX Page 1 (and Page 2) Appendix E DOE O 251.1C E- 6 1-15-09 DOE O XXX.X Attachment 2 DRAFT XX-XX-XX Page 1 (and Page 2) draftDOE O XXX.XdraftDOE O XXX.Xu.s. Department of EnergyORDER draft DOE O XXX.X draft DOE O XXX.X Washington, DC Approved: XX-XX-XXXX SUBJECT: title PURPOSE. (Define the program or subject matter and its

  2. A :netao '?X,S vrtttcn (XX-x-162) to ;,r+ allison dascrllltnPr a m?neral 7m~rM o

    Office of Legacy Management (LM)

    A :netao '?X,S vrtttcn (XX-x-162) to ;,r+ allison dascrllltnPr a m?neral 7m~rM of metallurKic.%l, fabrication, and nhysicnf stuJles whtch owht to be carried out as lntcnsively as -loseible stnrtinr: imiaedintely, in order to Tmvide information for the desicn of efficient methods of using atomic noxer. This nrescnt memo becomes more snecific in q entionini: lines of vmr!: which the idetholis and iinterlals Section believes to bc of lnortence. It also tells names of neonle and olaces where useful

  3. CAP XX Pty Ltd | Open Energy Information

    Open Energy Info (EERE)

    Zip: NSW 2066 Product: Australia-based designer and manufacturer of high power density supercapacitors. References: CAP-XX Pty Ltd1 This article is a stub. You can help...

  4. WEATHERIZATION PROGRAM NOTICE 16-XX EFFECTIVE DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WEATHERIZATION PROGRAM NOTICE 16-XX EFFECTIVE DATE: SUBJECT: WEATHERIZATION OF RENTAL UNITS - Applicable to single family and multifamily dwellings PURPOSE: To provide Grantees with updated guidance on weatherizing rental units in the Weatherization Assistance Program (WAP). DOE has answered specific questions from Grantees related to the weatherization of rental units, whether single family building or multifamily dwellings, over a number of years. However, the responses to these questions have

  5. RELAP5-3D V. 4.X.X

    Energy Science and Technology Software Center (OSTI)

    000191MLTPL01 NON-NRC FUNDED RELAP5-3D VERSION 4.x.x SOFTWARE REACTOR EXCURSION AND LEAK ANALYSIS PACKAGE - THREE DIMENSIONAL

  6. OMB No. XXXX-XXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BARGE, AND RAIL MOVEMENTS ACTIVITY SUMMARY For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1) Mailing Address of...

  7. WEATHERIZATION PROGRAM NOTICE 16-XX EFFECTIVE DATE: SUBJECT: MULTIFAMILY WEATHERIZATION

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-XX EFFECTIVE DATE: SUBJECT: MULTIFAMILY WEATHERIZATION PURPOSE: To provide Grantees with consolidated guidance on previously issued Weatherization Program Notices (WPNs) on weatherizing multifamily buildings in the Weatherization Assistance Program (WAP). This supersedes WPN 10-7 and WPN 11-9 SCOPE: The provisions of this guidance apply to Grantees applying for financial assistance under the Department of Energy (DOE) WAP. LEGAL AUTHORITY: Title IV, Energy Conservation and Production Act, as

  8. DOE G 441.1-XX Control and Release of Property with Residual...

    Office of Environmental Management (EM)

    April 4, 2002 FROM: STEPHEN M. SMITH, DEPUTY DIRECTOR OFFICE OF CORPORATE SOLUTIONS, ME-80 TO: DIRECTIVES POINTS OF CONTACT SUBJECT: DRAFT DOE G 441.1-XX, CONTROL AND RELEASE OF ...

  9. Long-distance entanglement and quantum teleportation in XX spin chains

    SciTech Connect (OSTI)

    Campos Venuti, L.; Giampaolo, S. M.; Illuminati, F.; Zanardi, P.

    2007-11-15

    Isotropic XX models of one-dimensional spin-1/2 chains are investigated with the aim to elucidate the formal structure and the physical properties that allow these systems to act as channels for long-distance, high-fidelity quantum teleportation. We introduce two types of models: (i) open, dimerized XX chains, and (ii) open XX chains with small end bonds. For both models we obtain the exact expressions for the end-to-end correlations and the scaling of the energy gap with the length of the chain. We determine the end-to-end concurrence and show that model (i) supports true long-distance entanglement at zero temperature, while model (ii) supports 'quasi-long-distance' entanglement that slowly falls off with the size of the chain. Due to the different scalings of the gaps, respectively exponential for model (i) and algebraic in model (ii), we demonstrate that the latter allows for efficient qubit teleportation with high fidelity in sufficiently long chains even at moderately low temperatures.

  10. A :netao '?X,S vrtttcn (XX-x-162) to ;,r+ allison dascrllltnPr...

    Office of Legacy Management (LM)

    XeJuction an& nurification methods for the metal should be sou&t ano the 12 usefulnas? oiL:stillation should be Determined. Sneddiw' s work on' 9e reduct.Zoa and- : castin? 2nd ...

  11. XX 08

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to protect the area from further damage. Northwest ratepayers will absorb the costs in electric rates, and BPA is offering a reward of up to 25,000 for information that leads...

  12. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SCR and SDR (if one is identified in the contract,) within 72 hours of the Contractor's learning of the situation. The Contractor shall cooperate with Sandia and provide...

  13. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... prior to any attempts to enter a government site as shown ... premises are subject to search. (e) Contractor shall ... Control : SF 6432-EI Title: Standard Terms & Conditions for ...

  14. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Release Date: 11/17/15 Page 1 of 25 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-TM (11/2015) Section II STANDARD TERMS AND CONDITIONS FOR TIME AND MATERIALS LABOR- HOUR CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY IDENTIFIED AS BEING CHANGED SUPPLEMENTED OR AMENDED IN WRITING ISSUED BY THE SANDIA CONTRACTING

  15. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Release Date: 11/17/15 Page 1 of 25 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-El (11/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR ALL COST-REIMBURSEMENT OR ORDERING AGREEMENTS WITH EDUCATIONAL INSTITUTIONS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE COVER PAGE OR SECTION I.

  16. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    costs are consistent with subparagraph (3) below. Control : SF 6432-TM Title: Standard Terms and Conditions for Time and Materials Labor-Hour Contracts Owner: Procurement Policy &...

  17. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    costs are comprised of indirect costs, including Control : SF 6432-TM Title: Standard Terms and Conditions for Time and Materials Labor-Hour Contracts Owner: Procurement Policy...

  18. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... National Fire Protection Association (NFPA), Standard of Mechanical Engineers (ASME), ... APPLY TO CONTRACTS AT ANY VALUE FAR 52.203-99 Prohibition of Contracting with Entities ...

  19. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... National Fire Protection Association (NFPA), Standard of Mechanical Engineers (ASME), ... APPLY TO CONTRACTS OF ANY VALUE FAR 52.203-99 Prohibition on Contracting with Entities ...

  20. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... prior to any attempts to enter a government site as shown ... premises are subject to search. (e) Contractor will ... SF 6432-EI Title: Standard Terms & Conditions for ...

  1. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... as those materials which enter directly into the end ... SF 6432-TM Title: Standard Terms and Conditions for Time and ... premises are subject to search. (e) Contractor shall ...

  2. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... SF 6432-EI Title: Standard Terms & Conditions for ... Any Contractor personnel who will enter a government site to ... premises are subject to search. (e) Contractor shall ...

  3. SF 6432-TM (xx-xx-xx) Time Material

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... as those materials which enter directly into the end ... Control : SF 6432-TM Title: Standard Terms and Conditions ... premises are subject to search. (e) Contractor will ...

  4. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    operations in flight or afloat, which are Control : SF 6432-EI Title: Standard Terms & Conditions for Educational Institutions Owner: Procurement Policy & Quality Dept Release...

  5. SF6432-EI (xx-xx-xx) Educational Institutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    laboratory procedures, loading or Control : SF 6432-EI Title: Standard Terms & Conditions for Educational Institutions Owner: Procurement Policy Department Release Date:...

  6. Energy levels, oscillator strengths, and radiative rates for Si-like Zn XVII, Ga XVIII, Ge XIX, and As XX

    SciTech Connect (OSTI)

    Abou El-Maaref, A.; Allam, S.H.; El-Sherbini, Th.M.

    2014-01-15

    The energy levels, oscillator strengths, line strengths, and transition probabilities for transitions among the terms belonging to the 3s{sup 2}3p{sup 2}, 3s3p{sup 3}, 3s{sup 2}3p3d, 3s{sup 2}3p4s, 3s{sup 2}3p4p and 3s{sup 2}3p4d configurations of silicon-like ions (Zn XVII, Ga XVIII, Ge XIX, and As XX) have been calculated using the configuration-interaction code CIV3. The calculations have been carried out in the intermediate coupling scheme using the BreitPauli Hamiltonian. The present calculations have been compared with the available experimental data and other theoretical calculations. Most of our calculations of energy levels and oscillator strengths (in length form) show good agreement with both experimental and theoretical data. Lifetimes of the excited levels have also been calculated. -- Highlights: We have calculated the fine-structure energy levels of Si-like Zn, Ga, Ge and As. The calculations are performed using the configuration interaction method (CIV3). We have calculated the oscillator strengths, line strengths and transition rates. The wavelengths of the transitions are listed in this article. We also have made comparisons between our data and other calculations.

  7. Draft DOE P 226

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Extension of DOE N XXX.X (Title) Synopsis Summary Background: The Office of XXXXXXXXXXXX (XX) is requesting a 1-year extension to DOE N XXX.X, (Title), dated XX-XX-XX. The Notice ...

  8. Chapter 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The Office of Xxxxxxxxxx has scheduled a (Event Type, i.e., holiday party) on (Month Day, Year) at the Forrestal Building in Rm. xx-xxx from x:xx to x:xx ampm. I am therefore ...

  9. Microsoft Word - xx xx 13 Midway pole replacement news release...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    local utilities. The public meeting is: Wednesday, Feb. 20, 2013 4 p.m. to 7 p.m. Moxee City Hall 255 W. Seattle Ave. Moxee, WA 98936 Because there will not be a formal...

  10. Form Reclearance Approval Expires: XX/XX/XXXX

    U.S. Energy Information Administration (EIA) Indexed Site

    collection of information unless the form displays a valid OMB number. U.S. Department of Energy U.S. Energy Information Administration Washington, DC 20585 Form EIA-858 Uranium...

  11. MEMORANDUM FOR:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    xx-xx-xxxx Expires: xx-xx-xxxx SUBJECT: EXTENSION OF DOE N XXX.X, (Title) Effective immediately, DOE N XXX.X, (Title), dated XX-XX-XX, is extended to XX-XX-XXXX, or until superseded. The requirements of DOE N XXX.X (state where the requirements will be incorporated, i.e., an Order, rule, etc.). If you need additional information, contact (name) at (phone number). BY ORDER OF THE SECRETARY OF ENERGY: NAME Deputy Secretary AVAILABLE ONLINE AT: INITIATED BY: www.directives.doe.gov Office of

  12. 71-100-01d

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DUKE UNIVERSITY FREE ELECTRON LASER LABORATORY LaSalle Street Extension, Duke University, Durham, NC 27708 Matthew admin 1282009 660-2694 XX-XX-XXX-XX C C D D H H K L 25 26 5004 ...

  13. RECS Propane Usage Form_v1 (Draft).xps

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Fuel Sold was: PPropane BButane OOther Enter the Price per Unit of Measure XXX.XX X.XX (select one) P B O MMDDYY Page 1 of ...

  14. The original of this document contains information which is subject...

    Broader source: Energy.gov (indexed) [DOE]

    ... EPSs affected by the EPS Final Rule are in XXX XXXXXXXX XX XXXXX, XXXXX XXXXX, XXXXXXXX, ... products, Tektronix requests an additional XXX XX months to come into compliance with the ...

  15. Non-Ideal p-n junction Diode of Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6, 0.7) Thin Films

    SciTech Connect (OSTI)

    Mustafa, Falah I.; Gupta, Shikha; Goyal, N.; Tripathi, S. K.

    2011-12-12

    We have made diodes consisting of the same alloy i.e. Sb{sub x}Se{sub 1-x}(x = 0.4, 0.5, 0.6 and 0.7), but change the concentration of Sb metal from 40% to 70% atomic weight percentage. It is observed from the Hall measurements that the nature of charge carriers have changed from p- to n-type at x = 0.6 for Sb{sub x}Se{sub 1-x}. We have measured I-V characteristics of four p-n junction diodes i.e. p-Sb{sub 2}Se{sub 3}/n-Sb{sub 3}Se{sub 2}, p-Sb{sub 2}Se{sub 3}/n-Sb{sub 7}Se{sub 3}, p-SbSe/n-Sb{sub 3}Se{sub 2}, p-SbSe/n-Sb{sub 7}Se{sub 3}. From the I-V plots we have calculated the parameters as built-in voltage (V{sub bi}), forward resistance (R{sub f}), ideal factor (n), saturation current (I{sub o}), breakdown current (I{sub Bd}) and breakdown voltage (V{sub Bd}).

  16. Slide 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    16XX 071620XX-0826XX 071620XX-0728XX 072820XX-0802XX 080220XX-0804XX JUN XX JUL XX AUG XX SEP X Page 3 Assessing Schedule Position (Float Analysis) Activity...

  17. EERE Program Management Initiative (PMI) Brochure

    Broader source: Energy.gov (indexed) [DOE]

    ... Program and Project Manager Performance Plans John Doe John Doe John Doe xxx-xx-xxxx EERExxxxxxxForrestalEE-xx EERE Program Management Initiative 8 December 2003 EERE Program ...

  18. OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy ...

  19. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    888 Total 999 Pipeline stocks must be greater than or equal to stocks in tanks and underground storage in Part 7. Finished Motor Gasoline Pipeline Stocks + Gulf Coast (PADD 3)...

  20. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    per Stream Day Quantity Used As Fuel or Feedstock Trucks Atmospheric Crude Oil Distillation Capacity PART 5. ATMOSPHERIC CRUDE OIL DISTILLATION CAPACITY AS OF JANUARY 1 1...

  1. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    same, only complete the physical address. For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1.) Comments: Identify any...

  2. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PART 1. RESPONDENT IDENTIFICATION DATA For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1.) OOG.SURVEYS@eia.doe.gov...

  3. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OF THE MONTH (Barrels per Calendar Day) For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1.) Mailing Address of...

  4. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    same, only complete the physical address. For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1) Month A completed form...

  5. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using one of the following methods: For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1) Enter barrels to the...

  6. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    day following the end of the report month. For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1.) Month Forms may be...

  7. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    comment from another, press ALT+ENTER.) For the PC Electronic Data Reporting Option (PEDRO) software, call (202) 586-9659. (See Form instructions, pg 1.) Forms may be submitted...

  8. OMB No. XXXX-XXXX Expiration Date: XX/XX/XXXX

    Gasoline and Diesel Fuel Update (EIA)

    Product Code Input Production Stocks End of Week Oxygenates, Renewable Fuels, and Hydrocarbon Gas Liquids*: 003 Hydrocarbon Gas Liquids* 242 Consumer and Export Grade Propane...

  9. Microsoft Word - xx xx 13 Bill Drummond sworn in as administrator...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and executive management to the agency. Before joining BPA, Drummond had managed Western Montana Electric Generating and Transmission Cooperative in Missoula, Mont., for...

  10. MAPPER - Sheet1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .13 204.66 RSF - DRAWN OF INCHES mm mm IN REV D 1 INITIAL ISSUE x x.xxx x.xx SIDNEY W. BARNES RESEARCH LABORATORY DESCRIPTION DATE ZONE 11 - .0005 .013 DEPT. OF...

  11. MEMORANDUM FOR:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Washington, D.C. Approved: XX-XX-20XX Expires: XX-XX-20XX SUBJECT: TITLE 1 purpose . (Define the program or subject matter and its purpose/goals/objectives. Goals should be stated in simple, straightforward language that describes the results to be achieved by issuance of the Notice.) 2 CANCELLATION . DOE N XXX.X, Title, dated X-X-XX. (When the Notice replaces another directive currently in use, the canceled directive [i.e., Policy, Order, Notice, Manual, or Guide] is identified by number,

  12. OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy and Economic Performance | Department of Energy OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance (376.88 KB) More Documents & Publications Microsoft PowerPoint - 08 Lawrence 2010 DOE PM Workshop_EO 13514_03-01-10_presentation

  13. DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    O 580 .1 A Admin Chg 1 3 10-23 2012 U.S. Department of Energyadmin change DOE O XXX.XWashington, D.C. DOE O XXX.X Chg X: XX-XX-XXXX SUBJECT: ADMINISTRATIVE CHANGE TO DOE O XXX.X, TITLE (IN ITALICS) EXPLANATION OF CHANGES. [This information can be copied from the Approval Memo] LOCATIONS OF CHANGES: Page Paragraph Changed To [Original text that was changed] [Revised text]

  14. Microsoft Word - XX 13 Colville Tribe to celebrate opening of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    will significantly boost the availability of chinook salmon for the tribe and for sport fishing in the Columbia River as well as reintroduce spring chinook to the Okanogan...

  15. NAP-XX Defense Programs Business Requirements and Processes Manual

    National Nuclear Security Administration (NNSA)

    Programs http://nnsa.energy.gov printed copies are uncontrolled SUPPLEMENTAL DIRECTIVE Approved: 2-25-16 DEFENSE PROGRAMS BUSINESS PROCESS SYSTEM (DPBPS) NATIONAL NUCLEAR SECURITY ADMINISTRATION Office of Defense Programs NNSA SD 452.3-1A THIS PAGE INTENTIONALLY LEFT BLANK NNSA SD 452.3-1A 1 2-25-16 DEFENSE PROGRAMS BUSINESS PROCESS SYSTEM 1. PURPOSE. This supplemental directive (SD) establishes the Defense Programs Business Process System (DPBPS) Portal as the mechanism for implementing DOE

  16. Microsoft Word - XX 15 BPA moving forward with Hooper Springs...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CONTACT: Doug Johnson, 503-230-5840503-230-5131 BPA selects final path for its Hooper Springs Transmission project Portland, Ore. - The Bonneville Power Administration has decided...

  17. Microsoft Word - XX 13 Public scoping Walla Walla Basin Spring...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    existing adult holding and spawning facility on the South Fork Walla Walla River near Milton-Freewater in Umatilla County, Ore. This is the latest project in an ongoing...

  18. Microsoft Word - XX 13 Science and education grants offered by...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gotoEducationGrants . BPA's education program provides free presentations and information to K-12 schools in our region to help students achieve energy literacy, and to...

  19. Microsoft Word - XX 13 IG report statement 10-2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    particularly against those who raise concerns. As we move forward to rebuild our human resource capabilities, all of us at BPA will continue to serve our core mission by...

  20. ANL-78-XX-95 Energy Level Structure and Transition Probabilities

    Office of Scientific and Technical Information (OSTI)

    III. Treatment of Experimental Data 8 Fig. 2. Crystal-field Parameters for Ln 3+ :LaCl 3 and Ln 3+ :LaF 3 13 IV. Energy Level Correlations - Survey of Experimental Data 14 1. f 2 ...

  1. Microsoft Word - XX 14 Delwiche and Andrews appointments FINAL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for BPA's power planning and scheduling functions; generation asset management; power contracts and rates; power purchases and acquisitions; and business relationships with...

  2. Microsoft Word - XX 13 Coyote Creek land acquisition provides...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wingert, 503-230-4140 or 503-230-5131 Rare wet prairie, wildlife corridor protected by land acquisition in Willamette Valley Portland, Ore. - Building upon a well-established...

  3. Microsoft Word - XX 13 HRD dep adm release (3).doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    capital management function and ensure it has high performing compliance and governance functions. First, Brian E. Carter, currently the CivilianHuman Resources Officer for the...

  4. Double trisomy mosaic (47,XXX/48,XXX,+13) confirmed by FISH and skin fibroblast culture

    SciTech Connect (OSTI)

    Lieber, E.; Grady, V.; Dosik, H.

    1994-09-01

    A 4 lb 8 oz female was born to a 49-year-old woman (P1200G12) at 40 weeks. The baby had tetralogy of Fallot, polydactyly, microcephaly, low set simple ears, posterior cleft of the soft palate and overlapping flexion deformities of both hands. The eyes were deep set. The clinical impression was trisomy 13. The baby is not doing well and needs a gastrotomy tube for feeding. Sucking is allright but swallowing is impeded. An MRI showed an anomaly of the corpus callosum. The ophthalmological examination showed no abnormalities. A chromosome study on a 2-day peripheral blood sample resulted in poor growth and poor morphology; however, 20 Giemsa-banded cells revealed a 47,XXX karyotype. A second specimen was obtained to search for mosaicism and a blood smear revealed nuclear projections on the neutrophils. FISH analysis using whole chromosome painting probe (Life Technologies) first identified the extra chromosome number 13, the final results showing five of sixty metaphase cells (8.3%) with trisomy 13. Cytogenetic analysis using Giemsa-banding technique revealed four cells in fifty examined (8.0%) with a 48,XXX,+13 karyotype. In order to further evaluate the mosaicism, cytogenetic analysis of a skin fibroblast culture was performed. Twenty one of twenty three cells examined (91.3%) showed the 48,XXX,+13 karyotype. FISH analysis of the skin biopsy revealed eighteen of twenty cells (90.9%) with the trisomy 13. The FISH technique is an important enhancement to routine cytogenetic studies when they do not immediately correlate with clinical impressions.

  5. DEACTIVATION COMPLETION AND TURNOVER Deactivation Completion...

    Office of Environmental Management (EM)

    ... records the stated condition will be placed in the space or system file folder. WP-xx-xxx Work Plans written to perform activities to support closeout of specific end-points or ...

  6. Guide Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE G XXX.X-X xx-xx-20XX Guide Title [This Guide describes acceptable, but not mandatory means for complying with requirements. Guides are not requirements documents and are not to be construed as requirements in any audit or appraisal for compliance with associated rule or directives.] U.S. Department of Energy Office of Primary Interest FOREWORD (optional) THE FOREWORD SHOULD DESCRIBE THE DOE REQUIREMENTS, DIRECTIVES, OR RULES THAT MAY BE SATISFIED BY IMPLEMENTING THIS GUIDE. CONTENTS

  7. InGaN Quantum Dot Fabrication using Quantum Size Controlled Photoelect...

    Office of Scientific and Technical Information (OSTI)

    X1 X-X" X-* X-* X- - -X-X XJ x-S' X- - -.* x- X-J* X- - -< X- -X- X- - X- -J- X- (tm) ' X-- - xjr x- - -X X-A * XJ x- - -.* X-X-X X---I* X-J* X->* X- X- - - ...

  8. SECTION L … ATTACHMENT xx … KEY PERSONNEL AND CRITICAL WORK...

    National Nuclear Security Administration (NNSA)

    the proposed duties and responsibilities of the proposed position. 8. Professional credentials that are relevant to the individual's proposed position. 9. Signed 3-Year Letter of ...

  9. Microsoft Word - xx 13 Treasury Payment Oct 2013 Final Oct 4...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Energy Northwest projects. Energy Northwest develops, owns and operates a diverse mix of electricity generating resources, including the Northwest's only nuclear generating...

  10. Microsoft Word - XX 14 15 minute scheduling release FINAL.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with abundant clean energy resources, led by the hydropower system," said John Prescott, president and CEO of PNGC Power. "BPA has been proactive in taking steps to increase...

  11. Microsoft PowerPoint - xxDraft SEIS PUBLIC MEETING PRESENTATION...

    National Nuclear Security Administration (NNSA)

    Zircaloy Tritium Getter Nickel Plate Lithium Aluminate Pellets Zircaloy Liner Lithium Aluminate Pellets Ceramic material containing Lithium-6, the active ingredient that transmutes ...

  12. Microsoft Word - NRAP-TRS-III-0XX-2016_A Users Guide to DFNGen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... A User's Guide to DFNGen 12 The second group of options involves saving DFNGen files. 11 The File>Save command will save the current data set using the current file name and ...

  13. Microsoft Word - XX 14 Connolly named VP Gen - Asset Mgmt FINAL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 14 BONNEVILLE POWER ADMINISTRATION FOR IMMEDIATE RELEASE Monday, Oct. 6, 2014 CONTACT: Doug Johnson, 503-230-5840503-230-5131 Kieran Connolly named BPA vice president of...

  14. THE ANGLO-AUSTRALIAN PLANET SEARCH. XX. A SOLITARY ICE-GIANT PLANET ORBITING HD 102365

    SciTech Connect (OSTI)

    Tinney, C. G.; Wittenmyer, Robert A.; Bailey, Jeremy; Butler, R. Paul; Jones, Hugh R. A.; O'Toole, Simon; Carter, Brad D.

    2011-02-01

    We present 12 years of precision Doppler data for the very nearby G3 star HD 102365, which reveals the presence of a Neptune-like planet with a 16.0 M{sub Earth} minimum mass in a 122.1 day orbit. Very few 'Super Earth' planets have been discovered to date in orbits this large and those that have been found reside in multiple systems of between three and six planets. HD 102365 b, in contrast, appears to orbit its star in splendid isolation. Analysis of the residuals to our Keplerian fit for HD 102365 b indicates that there are no other planets with minimum mass above 0.3 M{sub Jup} orbiting within 5 AU and no other 'Super Earths' more massive than 10 M{sub Earth} orbiting at periods shorter than 50 days. At periods of less than 20 days these limits drop to as low as 6 M{sub Earth}. There are now 32 exoplanets known with minimum mass below 20 M{sub Earth}, and interestingly the period distributions of these low-mass planets seem to be similar whether they orbit M-, K-, or G-type dwarfs.

  15. Microsoft Word - XX 15 Jensen named BPA general counsel (3) FINAL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in creating national guidelines for power marketing administrations in states where marijuana sales are lawful under state statutes. She also instituted new processes that enable...

  16. SECTION L … ATTACHMENT xx … KEY PERSONNEL AND CRITICAL WORK AREA PERSONNEL RESUME ELEMENTS

    National Nuclear Security Administration (NNSA)

    2] Attachment L-3a KEY PERSONNEL RESUME ELEMENTS 1. Name of Offeror: 2. Name of Key Person: 3. Proposed Position: 4. Duties and Responsibilities in Proposed Position including elements of SOW assigned: 5. Chronological Work History: Start with current position and work backwards. A. Name and Address of Firm: B. Position(s) Held: C. Dates of Employment: D. General Summary of Responsibilities: Provide a concise description of major duties and responsibilities for each job relevant to the proposed

  17. Microsoft PowerPoint - xxDraft SEIS PUBLIC MEETING PRESENTATION 9 sep 2014 [Compatibility Mode]

    National Nuclear Security Administration (NNSA)

    Public Hearings on Draft SEIS September 9-10, 2014 National Nuclear Security Administration (NNSA) Department of Energy (DOE) 1 Supplemental Environmental Impact Statement (SEIS) for the Production of Tritium in a Commercial Light Water Reactor Background * NNSA is the federal agency responsible for providing the nation with nuclear weapons and ensuring those weapons remain safe and reliable * Tritium is a radioactive isotope of hydrogen and is an essential component of every weapon in the

  18. Microsoft Word - XX 13 New book reveals drama behind your light...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    evolving environmental values and building out the regional power grid. Filled with spectacular photographs, it tells the stories vividly through the lens of BPA, the federal...

  19. Building Interoperability

    Broader source: Energy.gov (indexed) [DOE]

    Page 3 20XX-XX-XX Market Place Needs - Data Fatigue Carbon Emissions Alternative Energy Demand Response Distributed Power IAQ Personal UI Mobile Cloud IT Convergence Charging...

  20. Appendix A, Sample Register REGISTER XY CONTRACTING OFFICE Initiation

    Broader source: Energy.gov (indexed) [DOE]

    Number Solicitation Number Business Instrument Number 08302011 XX REQ- 11XX12345 DE-SOL- XX12345 DE- XY12345 AmendmentModification REQ- 11XX12345.000 Modification 001...

  1. Microsoft Word - NRAP-TRS-III-0XX-2016_A Users Guide to DFNGen 2016.final.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A User's Guide to DFNGen 28 January 2016 Office of Fossil Energy NRAP-TRS-III-001-2016 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents

  2. Experimental investigation of factors limiting slow axis beam quality in 9xx nm high power broad area diode lasers

    SciTech Connect (OSTI)

    Winterfeldt, M. Crump, P.; Wenzel, H.; Erbert, G.; Trnkle, G.

    2014-08-14

    GaAs-based broad-area diode lasers are needed with improved lateral beam parameter product (BPP{sub lat}) at high power. An experimental study of the factors limiting BPP{sub lat} is therefore presented, using extreme double-asymmetric (EDAS) vertical structures emitting at 910?nm. Continuous wave, pulsed and polarization-resolved measurements are presented and compared to thermal simulation. The importance of thermal and packaging-induced effects is determined by comparing junction -up and -down devices. Process factors are clarified by comparing diodes with and without index-guiding trenches. We show that in all cases studied, BPP{sub lat} is limited by a non-thermal BPP ground-level and a thermal BPP, which depends linearly on self-heating. Measurements as a function of pulse width confirm that self-heating rather than bias-level dominates. Diodes without trenches show low BPP ground-level, and a thermal BPP which depends strongly on mounting, due to changes in the temperature profile. The additional lateral guiding in diodes with trenches strongly increases the BPP ground-level, but optically isolates the stripe from the device edges, suppressing the influence of the thermal profile, leading to a BPP-slope that is low and independent of mounting. Trenches are also shown to initiate strain fields that cause parasitic TM-polarized emission with large BPP{sub lat}, whose influence on total BPP{sub lat} remains small, provided the overall polarization purity is >95%.

  3. Energy levels, transition probabilities, and electron impact excitations for La XXX

    SciTech Connect (OSTI)

    Zhong, J.Y. . E-mail: jyzhong@aphy.iphy.ac.cn; Zhao, G.; Zhang, J.

    2006-09-15

    energy levels, spontaneous radiative decay rates, and electron impact collision strengths are calculated for La XXX. The data refer to 107 fine-structure levels belonging to the configurations (1s{sup 2}2s{sup 2}2p{sup 6})3s{sup 2}3p{sup 6}3d{sup 10}, 3s{sup 2}3p{sup 6}3d{sup 9}4l, 3s{sup 2}3p{sup 5}3d{sup 10}4l, and 3s3p{sup 6}3d{sup 10}4l (l = s, p, d, f). The collision strengths are calculated with a 20-collision-energy grid in terms of the energy of the scattered electron between 10 and 10,000 eV by using the distorted-wave approximation. Effective collision strengths are obtained at seven electron temperatures: T {sub e} (eV) = 10, 100, 300, 500, 800, 1000, and 1500 by integrating the collision strengths over a Maxwellian electron distribution. Coupled with these atomic data, a hydrodynamic code MED103 can be used to simulate the Ni-like La X-ray laser at 8.8 nm.

  4. MEMORANDUM FOR:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    directives (is/are) canceled: DOE G, Title, dated XX-XX-XX (Author: email; phone number) DOE G, Title, dated XX-XX-XX (Author: email; phone number) Cancellation of these directives (this directive) does not relieve the Department or its contractors from complying with applicable Federal laws and regulations pertaining to the canceled directives. Inquiries should be addressed to the point(s) of contact listed with the directive(s). For information about the Departmental Directives Program,

  5. NON-NRC FUNDED RELAP5-3D VERSION 4.x.x SOFTWARE REACTOR EXCURSION AND LEAK ANALYSIS PACKAGE - THREE DIMENSIONAL

    SciTech Connect (OSTI)

    2012-03-26

    The RELAP5-3D Version 3.x code has been developed for best-estimate transient simulation of nuclear reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents and operational transients such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems including pressurized water reactors, boiling water reactors, Soviet-designed reactors, heavy water reactors, gas-cooled reactors, liquid metal and molten salt cooled reactors, and even fusion reactors. Numerical models include multi-dimensional hydrodynamics, 1- and 2-D heat transfer in metal walls, 0-, 1-, 2-, and 3-D neutron kinetics, trips, and control systems. Secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems.

  6. ASME N511-19XX, Standard for periodic in-service testing of nuclear air treatment, heating, ventilating and air conditioning systems

    SciTech Connect (OSTI)

    1997-08-01

    A draft version of the Standard is presented in this document. The Standard covers the requirements for periodic in-service testing of nuclear safety-related air treatment, heating, ventilating, and air conditioning systems in nuclear facilities. The Standard provides a basis for the development of test programs and does not include acceptance criteria, except in cases where the results of one test influence the performance of other tests. The Standard covers general inspection and test requirements, reference values, inspection and test requirements, generic tests, acceptance criteria, in-service test requirements, testing following an abnormal incident, corrective action requirements, and quality assurance. Mandatory appendices provide a visual inspection checklist and four test procedures. Non-mandatory appendices provide additional information and guidance on mounting frame pressure leak test procedure, corrective action, challenge gas substitute selection criteria, and test program development. 8 refs., 10 tabs.

  7. NON-NRC FUNDED RELAP5-3D VERSION 4.x.x SOFTWARE REACTOR EXCURSION AND LEAK ANALYSIS PACKAGE - THREE DIMENSIONAL

    Energy Science and Technology Software Center (OSTI)

    2012-03-26

    The RELAP5-3D Version 3.x code has been developed for best-estimate transient simulation of nuclear reactor coolant systems during postulated accidents. The code models the coupled behavior of the reactor coolant system and the core for loss-of-coolant accidents and operational transients such as anticipated transient without scram, loss of offsite power, loss of feedwater, and loss of flow. A generic modeling approach is used that permits simulating a variety of thermal hydraulic systems including pressurized watermore » reactors, boiling water reactors, Soviet-designed reactors, heavy water reactors, gas-cooled reactors, liquid metal and molten salt cooled reactors, and even fusion reactors. Numerical models include multi-dimensional hydrodynamics, 1- and 2-D heat transfer in metal walls, 0-, 1-, 2-, and 3-D neutron kinetics, trips, and control systems. Secondary system components are included to permit modeling of plant controls, turbines, condensers, and secondary feedwater systems.« less

  8. Template for Contracting Company Drug Testing for DOE Positions

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Address of Requestor Dear Sir or Madam: Subject: Last name, First name Middle initial - [last four digits of the SSN] xxx-xx-0123 This letter is in response to a request from [insert name of requestor] received on [insert date] to process [insert name] for a Department of Energy (DOE) security clearance in connection with his/her employment as [insert position] with [insert company name] under [insert site office] Contract No.: [insert contract number] Please be advised that your request for a

  9. MEMORANDUM FOR:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    directive(s) (is/are) canceled: DOE (O, M, P, N), Title, dated XX-XX-XX (Author: email; phone number) DOE (O, M, P, N), Title, dated XX-XX-XX (Author: email; phone number) Cancellation of these directives (this directive) does not relieve the Department or its contractors from complying with applicable Federal laws and regulations pertaining to the canceled directives. Inquiries should be addressed to the point(s) of contact listed with the directive(s). For information about the Departmental

  10. DOE Acquisition Guide ...

    Energy Savers [EERE]

    ... handling of employee morale problems, etc. Planning: Adequate, quality, innovative, ... date Complete the 20XX Biennial Emergency Management Exercise. Ref: ...

  11. Lifetime and Polarization of the Radiative Decay of Excitons, Biexcitons, and Trions in CdSe Nanocrystal Quantum Dots

    SciTech Connect (OSTI)

    Califano, M.; Franceschetti, A.; Zunger, A.

    2007-01-01

    Using the pseudopotential configuration-interaction method, we calculate the intrinsic lifetime and polarization of the radiative decay of single excitons (X), positive and negative trions (X{sup +} and X{sup -}), and biexcitons (XX) in CdSe nanocrystal quantum dots. We investigate the effects of the inclusion of increasingly more complex many-body treatments, starting from the single-particle approach and culminating with the configuration-interaction scheme. Our configuration-interaction results for the size dependence of the single-exciton radiative lifetime at room temperature are in excellent agreement with recent experimental data. We also find the following. (i) Whereas the polarization of the bright exciton emission is always perpendicular to the hexagonal c axis, the polarization of the dark exciton switches from perpendicular to parallel to the hexagonal c axis in large dots, in agreement with experiment. (ii) The ratio of the radiative lifetimes of mono- and biexcitons (X):(XX) is {approx}1:1 in large dots (R=19.2 {angstrom}). This ratio increases with decreasing nanocrystal size, approaching 2 in small dots (R=10.3 {angstrom}). (iii) The calculated ratio (X{sup +}):(X{sup -}) between positive and negative trion lifetimes is close to 2 for all dot sizes considered.

  12. TO: INGRID KOLB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (NOTE: Per Office of the Executive Secretariat procedures, please use Calibri, 12 point font for this action memorandum) TO: INGRID KOLB DIRECTOR OFFICE OF MANAGEMENT FROM: SECRETARIAL OFFICER'S NAME TITLE SUBJECT: DIRECTIVES CERTIFICATION STATEMENT DOE (number, title, dated xx-xx-xx) has been reviewed by my organization and deemed to be in compliance with related Departmental Directives, Secretarial Delegations, organizational structure, budget guidelines, regulations, standards, OMB guidance,

  13. FEMP ESPC Project Development Resource Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... TO: All DOE ESPC IDIQ Contract Holders DATE: XX FROM: Contracting Officer Agency Contact Info SUBJECT: Notice of Opportunity (NOO) for Energy Savings Performance Contract (ESPC) ...

  14. Sample Contract Language for Construction Using Energy-Efficient...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Method of Assessment - Random Sampling. (3) Performance Threshold - Up to 100 compliance, assuming life cycle cost efficient. Section H - Special Contract Requirements H-xx. ...

  15. Notice of Intent to Issue DOE N 314.1, DOE-Flex: DOE's Telework Program while Developing a Successor Order (5-6-11)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-06

    This is to develop DOE N 3XX, which will establish the requirements and responsibilities for the Department's telework/flexiplace program.

  16. No.","Financial and Activity Report (sheet 1 of 2) Version 1...

    Broader source: Energy.gov (indexed) [DOE]

    Department of Defense--Military","(005-08) Department of Agriculture: ... ","(007-XX) Department of Defense--Military","(12-3504 2010 2011) Special ...

  17. No.","Financial and Activity Report (sheet 1 of 2) Version 1...

    Broader source: Energy.gov (indexed) [DOE]

    Department of Defense--Military","(005-08) Department of Agriculture: ... ","(007-XX) Department of Defense--Military","(12-3540 2009 2010) State Child ...

  18. The solar neighborhood. XXX. Fomalhaut C

    SciTech Connect (OSTI)

    Mamajek, Eric E.; Bartlett, Jennifer L.; Finch, Charlie T.; Seifahrt, Andreas; Bean, Jacob; Henry, Todd J.; Dieterich, Sergio B.; Lurie, John C.; Jao, Wei-Chun; Winters, Jennifer G.; Kenworthy, Matthew A.; Riedel, Adric R.; Subasavage, John P.; Ianna, Philip A.

    2013-12-01

    LP 876-10 is a nearby active M4 dwarf in Aquarius at a distance of 7.6 pc. The star is a new addition to the 10 pc census, with a parallax measured via the REsearch Consortium On Nearby Stars (RECONS) astrometric survey on the Small and Moderate Aperture Research Telescope System's 0.9 m telescope. We demonstrate that the astrometry, radial velocity, and photometric data for LP 876-10 are consistent with the star being a third bound stellar component to the Fomalhaut multiple system, despite the star lying nearly 6° away from Fomalhaut A in the sky. The three-dimensional separation of LP 876-10 from Fomalhaut is only 0.77 ± 0.01 pc, and 0.987 ± 0.006 pc from TW PsA (Fomalhaut B), well within the estimated tidal radius of the Fomalhaut system (1.9 pc). LP 876-10 shares the motion of Fomalhaut within ∼1 km s{sup –1}, and we estimate an interloper probability of ∼10{sup –5}. Neither our echelle spectroscopy nor astrometry are able to confirm the close companion to LP 876-10 reported in the Washington Double Star Catalog (WSI 138). We argue that the Castor Moving Group to which the Fomalhaut system purportedly belongs, is likely to be a dynamical stream, and hence membership to the group does not provide useful age constraints for group members. LP 876-10 (Fomalhaut C) has now risen from obscurity to become a rare example of a field M dwarf with well-constrained age (440 ± 40 Myr) and metallicity. Besides harboring a debris disk system and candidate planet, Fomalhaut now has two of the widest known stellar companions.

  19. Energies and E1, M1, E2, and M2 transition rates for states of the 2s{sup 2}2p{sup 3}, 2s2p{sup 4}, and 2p{sup 5} configurations in nitrogen-like ions between F III and Kr XXX

    SciTech Connect (OSTI)

    Rynkun, P.; Jönsson, P.; Gaigalas, G.; Froese Fischer, C.

    2014-03-15

    Based on relativistic wavefunctions from multiconfiguration Dirac–Hartree–Fock and configuration interaction calculations, E1, M1, E2, and M2 transition rates, weighted oscillator strengths, and lifetimes are evaluated for the states of the (1s{sup 2})2s{sup 2}2p{sup 3},2s2p{sup 4}, and 2p{sup 5} configurations in all nitrogen-like ions between F III and Kr XXX. The wavefunction expansions include valence, core–valence, and core–core correlation effects through single–double multireference expansions to increasing sets of active orbitals. The computed energies agree very well with experimental values, with differences of only 300–600 cm{sup −1} for the majority of the levels and ions in the sequence. Computed transitions rates are in close agreement with available data from MCHF-BP calculations by Tachiev and Froese Fischer [G.I. Tachiev, C. Froese Fischer, A and A 385 (2002) 716].

  20. Compactification of Patterns by a Singular Convection or Stress

    SciTech Connect (OSTI)

    Rosenau, Philip

    2007-12-07

    A wide variety of propagating disturbances in physical systems are described by equations whose solutions lack a sharp propagating front. We demonstrate that presence of particular nonlinearities may induce such fronts. To exemplify this idea, we study both dissipative u{sub t}+{partial_derivative}{sub x}f(u)=u{sub xx} and dispersive u{sub t}+{partial_derivative}{sub x}f(u)+u{sub xxx}=0 patterns, and show that a weakly singular convection f(u)=-u{sup {alpha}}+u{sup m}, 0<{alpha}<1

  1. Clearance of Real and Personal Property Under New DOE Radiation...

    Office of Environmental Management (EM)

    ... limits * Pre-approved limits included are: -radium-226 (or thorium 230) soil concentrations -radium 228 (or thorium-232) soil concentrations -surface guidelines in G 441.1-xx ...

  2. NREL Technology Partnership Participant Data Sheet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by MRINREL, foreign nationals? If so, please provide the country of citizenship and immigration status (Green Card, H1B, F1Visa or etc.) of each foreign national. F12XX-E(012006)...

  3. Notification of Planned 230kV Outage at Potomac River Generating...

    Energy Savers [EERE]

    Subject: Notification of Planned 230kV Outage at Potomac River Generating Station To ... The next planned outage on 23106 high voltage circuit between xxxxxxx xx xxxx and ...

  4. Metal to Insulator Transition on the N = 0 Landau Level in Graphene

    SciTech Connect (OSTI)

    Zhang, L.; Zhang, Y.; Khodas, M.; Valla, T.; Zaliznyak, I.A.

    2010-07-23

    The magnetotransport in single layer graphene has been experimentally investigated in magnetic fields up to 18 T as a function of temperature. A pronounced T dependence is observed for T {approx}< 50 K, which is either metallic, or insulating, depending on the filling factor {nu}. The metal-insulator transition (MIT) occurs at |{nu}{sub c}| {approx}0.65 and in the regime of the dissipative transport, where the longitudinal resistance R{sub xx} >1/2R{sub K}. The critical resistivity (R{sub xx} per square) is {rho}{sub xx}({nu}{sub c}) {approx} 1/2R{sub K} and is correlated with the appearance of zero plateau in Hall conductivity {sigma}{sub xy}({nu}) and peaks in {sigma}{sub xx}({nu}). This leads us to construct a universal low-T (n, B) phase diagram of this quantum phase transition.

  5. Slide 1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    XX7 - - - - - 30 (30) 228 February Summary 120 75 195 10 185 50 135 Contract Budget Base (CBB) Log Page 4 Undistributed Budget Parameters * Should be distributed within two...

  6. Rescission of American Recovery and Reinvestment Act Reporting Requirements

    Broader source: Energy.gov [DOE]

    Financial Assistance Letter (FAL) 2014-xx provides COs with: 1) notice of the recession of the reporting requirements for recipients of ARRA funds in accordance with the recently passed P.L. 113-76, Consolidated Appropriations Act, 2014

  7. Extrinsic anomalous Hall effect in epitaxial Mn{sub 4}N films

    SciTech Connect (OSTI)

    Meng, M.; Wu, S. X. Ren, L. Z.; Zhou, W. Q.; Wang, Y. J.; Wang, G. L.; Li, S. W.

    2015-01-19

    Anomalous Hall effect (AHE) in ferrimagnetic Mn{sub 4}N epitaxial films grown by molecular-beam epitaxy is investigated. The longitudinal conductivity σ{sub xx} is within the superclean regime, indicating Mn{sub 4}N is a highly conducting material. We further demonstrate that the AHE signal in 40-nm-thick films is mainly due to the extrinsic contributions based on the analysis fitted by ρ{sub AH}=a′ρ{sub xx0}+bρ{sub xx}{sup 2} and σ{sub AH}∝σ{sub xx}. Our study not only provide a strategy for further theoretical work on antiperovskite manganese nitrides but also shed promising light on utilizing their extrinsic AHE to fabricate spintronic devices.

  8. Search for new physics in t?+ large ET-> bb?qq?qq? + large ET final state in pp? collisions at ?s=1.96 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aaltonen, T; Gonzalez, B Alvarez; Cantabria Inst. of Phys.; Amerio, S; Amidei, D; Anastassov, A; Annovi, A

    2011-11-11

    We present a search for a new particle T' decaying to a top quark via T' = t + X, where X goes undetected. We use a data sample corresponding to 5.7 fb-1 of integrated luminosity of pp? collisions with ?s = 1.96 TeV, collected at Fermilab Tevatron by the CDF II detector. Our search for pair production of T' is focused on the hadronic decay channel, pp? = T'T' ?= tt?+XX?=bqq?b?q?q + XX?. We interpret our results in terms of a model where T' is an exotic fourth generation quark and X is a dark matter particle. The datamoreare consistent with standard model expectations. We set a limit on the generic production of T'T' ? = tt ?=+ XX?, excluding the fourth generation exotic quarks T' at 95% confidence level up to mT` = 400 GeV/c2 for mX ? 70 GeV/c2.less

  9. Anomalous Hall effect in magnetic disordered alloys: Effects of spin orbital coupling

    SciTech Connect (OSTI)

    Ma, L.; Gao, W. B.; Zhou, S. M.; Shi, Z.; He, P.; Miao, J.; Jiang, Y.

    2013-12-28

    For disordered ternary Fe{sub 0.5}(Pd{sub 1−x}Pt{sub x}){sub 0.5} alloy films, the anomalous Hall effect obeys the conventional scaling law ρ{sub AH}=aρ{sub xx}+bρ{sub xx}{sup 2} with the longitudinal resistivity ρ{sub xx} and anomalous Hall resistivity ρ{sub AH}. Contributed by the intrinsic term and the extrinsic side-jump one, the scattering-independent anomalous Hall conductivity b increases with increasing Pt/Pd concentration. In contrast, the skew scattering parameter a is mainly influenced by the residual resistivity. The present results will facilitate the theoretical studies of the anomalous Hall effect in magnetic disordered alloys.

  10. Equivalence between XY and dimerized models

    SciTech Connect (OSTI)

    Campos Venuti, Lorenzo; Roncaglia, Marco

    2010-06-15

    The spin-1/2 chain with XY anisotropic coupling in the plane and the XX isotropic dimerized chain are shown to be equivalent in the bulk. For finite systems, we prove that the equivalence is exact in given parity sectors, after taking care of the precise boundary conditions. The proof is given constructively by finding unitary transformations that map the models onto each other. Moreover, we considerably generalized our mapping and showed that even in the case of fully site-dependent couplings the XY chain can be mapped onto an XX model. This result has potential application in the study of disordered systems.

  11. OMB Control Number: 1910-5165

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1910-5165 Expires: xx/xx/201x SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Please submit this Semi-Annual Davis-Bacon Enforcement Report to your site DOE/NNSA Contractor Human Resource Division (CHRD) Office. If you do not have a DOE/NNSA CHRD Office, please submit the report to: DBAEnforcementReports@hq.doe.gov. The following questions regarding enforcement activity (Davis-Bacon and Related Acts) by this Agency are required by 29 CFR, Part 5.7(b), and Department of Labor, All Agency Memorandum

  12. Open Issues

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 2011 Resolved: Pathscale/4.0.9 not compatible with default libraries October 14, 2011 by Helen He Symptom: New xt-libsci/11.x.x does not have pathscale support. Other default libraries (netcdf, hdf5, fftw, petsc, etc.) have no pathscale/4.0.9 support

  13. Released: July 2009

    U.S. Energy Information Administration (EIA) Indexed Site

    Corn Milling",0,0,0,0,0,0,0,"X",0 31131," Sugar Manufacturing",0,0,0,0,0,0,0,0,0 3114," ...illing",0,0,0,0,"X","X","X","X",0 31131," Sugar Manufacturing",0,0,"X",0,0,0,"X","X",0 ...

  14. Notice of Intent to Develop DOE P XXX.X, Contractor Assurance Systems Policy

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2016-06-09

    The Commission to Review the Effectiveness of the National Energy Laboratories (CRENEL) found that the implementation of contractor assurance system (CAS) is inconsistent and recommended that DOE ensure greater uniformity across the complex. CRENEL also recommended that site offices more extensively use data from CAS.

  15. Proceedings of the symposium on Scientific Basis for Nuclear Waste Management XXX

    SciTech Connect (OSTI)

    Dunn, Darrell; Poinssot, Christophe; Begg, Bruce

    2007-07-01

    Management of nuclear waste remains an important international topic that includes reprocessing of commercial nuclear fuel, waste-form design and development, storage and disposal packaging, the process of repository site selection, system design, and performance assessment. Requirements to manage and dispose of materials from the production of nuclear weapons, and the renewed interest in nuclear power, in particular through the Generation IV Forum and the Advanced Fuel Cycle Initiative, can be expected to increase the need for scientific advances in waste management. A broad range of scientific and engineering disciplines is necessary to provide safe and effective solutions and address complex issues. This volume offers an interdisciplinary perspective on materials-related issues associated with nuclear waste management programs. Invited and contributed papers cover a wide range of topics including studies on: spent fuel; performance assessment and models; waste forms for low- and intermediate-level waste; ceramic and glass waste forms for plutonium and high-level waste; radionuclides; containers and engineered barriers; disposal environments and site characteristics; and partitioning and transmutation.

  16. Form factors and complete spectrum of XXX antiperiodic higher spin chains by quantum separation of variables

    SciTech Connect (OSTI)

    Niccoli, G.

    2013-05-15

    The antiperiodic transfer matrices associated to higher spin representations of the rational 6-vertex Yang-Baxter algebra are analyzed by generalizing the approach introduced recently in the framework of Sklyanin's quantum separation of variables (SOV) for cyclic representations, spin-1/2 highest weight representations, and also for spin-1/2 representations of the 6-vertex reflection algebra. Such SOV approach allow us to derive exactly results which represent complicate tasks for more traditional methods based on Bethe ansatz and Baxter Q-operator. In particular, we both prove the completeness of the SOV characterization of the transfer matrix spectrum and its simplicity. Then, the derived characterization of local operators by Sklyanin's quantum separate variables and the expression of the scalar products of separate states by determinant formulae allow us to compute the form factors of the local spin operators by one determinant formulae similar to those of the scalar products.

  17. Self-Replenishing Vascularized Fouling-Release Surfaces

    Office of Scientific and Technical Information (OSTI)

    ... Interfaces XXXX, XXX, XXX-XXX Research Article ACS Applied Materials & Interfaces Silicone Oil (Liquid) External Infusion POMS (Solid) Silicone Oil Bath AndOr External Infusion ...

  18. The Return of the ORISE Cytogenetic Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Volume XXX Volume XXX Volume XXX Volume XXX Volume XXXV V V V V Numbe Numbe Numbe Numbe Number 10 r 10 r 10 r 10 r 10 For Specialists in Radiation Safety For Specialists in ...

  19. Notice of Intent to Develop a Page Change for DOE O 420.1C, Facility Safety

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2013-06-21

    The Page Change will be strictly limited in scope to changes necessary to accomplish the following objectives: (1) to invoke revised DOE-STD- 1104-20xx, Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Document, as a required method; (2) to invoke revised DOE-STD-3009-20xx, Preparation of Nonreactor Nuclear Facility Documented Safety Analysis, as a required method for new nuclear facilities as discussed below; and (3) to make miscellaneous administrative corrections and clarifications based on the one-year implementation review required by DOE O 251.1C, Departmental Directives Program. This JM is an update to one approved June 21, 2013.

  20. Fractional quantum Hall effect at Landau level filling ν = 4/11

    SciTech Connect (OSTI)

    Pan, W.; Baldwin, K. W.; West, K. W.; Pfeiffer, L. N.; Tsui, D. C.

    2015-01-09

    In this study, we report low temperature electronic transport results on the fractional quantum Hall effect of composite fermions at Landau level filling ν = 4/11 in a very high mobility and low density sample. Measurements were carried out at temperatures down to 15mK, where an activated magnetoresistance Rxx and a quantized Hall resistance Rxy, within 1% of the expected value of h/(4/11)e2, were observed. The temperature dependence of the Rxx minimum at 4/11 yields an activation energy gap of ~ 7 mK. Developing Hall plateaus were also observed at the neighboring states at ν = 3/8 and 5/13.

  1. No.","Financial and Activity Report (sheet 1 of 2) Version 1.4",,,,,,,,39843,"(0

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4",,,,,,,,39843,"(001) Legislative Branch","(001-35) Legislative Branch: Government Accountability Office","(05-0108 2009 \ 2010) Salaries and Expenses, Recovery Act","Contracts and Orders (including modifications)","Y-US" ,"Agency Name:","(019) Department of Energy",,,,,,,39850,"(005) Department of Agriculture","(005-XX) Department of Agriculture","(12-0111 2009 \ 2010) Agriculture Buildings and

  2. U

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transition Plan September 2002 TEMPLATE U. S. DEPARTMENT OF ENERGY Organizational Title 1 Organizational Title 2 Change Control Page The following information is being used to control and track modifications made to this document. 1) Revision Date: Author: Section(s): Page Number(s): Summary of Change(s): Title Page Document Name: Project Name Transition Plan Publication Date: Month Year Contract Number: XX-XXXX-XXXXXXXXX Project Number: Task: XXXXXXXXXXXXXX Prepared by: XXXX XXXXXX Approval:

  3. All Innovations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    70 Years of Innovations » All Innovations All Innovations Since 1943, some of the world's smartest and most passionate technical people have accomplished the difficult, the unexpected, and what sometimes seems impossible at Los Alamos. 70 YEARS OF INNOVATIONS 1940s 1943 WAR-ENDING INVENTIONS The Laboratory was created with one crucial objective: gather the world's brightest scientific minds to design and build a weapon that would help to end World War II. Fight power with power xx Essential for

  4. Amendment 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Date: 6/30/2016 ISSUED BY: National Renewable Energy Laboratory 15013 Denver West Parkway Golden, CO 80401 PROJECT NAME & LOCATION Service and Preventive Maintenance Agreement for Standby Power Generators The above numbered solicitation is amended as set forth below. The hour and date specified for receipt of offers [XX ] is not extended. [] is extended to OFFERORS ARE ADVISED TO ACKNOWLEDGE THIS AMENDMENT IN THEIR PROPOSAL. FAILURE TO ACKNOWLEDGE THIS AMENDMENT MAY RESULT IN REJECTION OF

  5. EERE PowerPoint 97-2004 Template: Green Version

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Novel Geothermal Development of Deep Sedimentary Systems in the U.S. Principal Investigators: Joseph Moore 1 & Rick Allis 2 1 Energy & Geoscience Institute, University of Utah; 2 Utah Geological Survey Track Name: Track 3 EGS1 Project Officer: Bill Vandermeer Total Project Funding: $xx May 13, 2015 This presentation does not contain any proprietary confidential, or otherwise restricted information. 200ºC NW SE Reservoir target 2 | US DOE Geothermal Office eere.energy.gov

  6. BWXT Pantex

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    [Enter Contractor name] FY 20XX [Enter year] Specific Plan for Workforce Restructuring: Involuntary Separation Program for the U.S. Department of Energy or National Nuclear Security Administration [Enter name of DOE or NNSA] Effective: [Enter Month and Year] May be exempt from public release under the Freedom of Information Act (5 USC 552) exemption number and category: #5, Privileged Information. Department of Energy review required before public release. Executive Summary During fiscal year

  7. The original of this document contains information which is subject to withholdi

    Office of Environmental Management (EM)

    March 8, 2016 ) Case No.: PSH-16-0014 ) ____________________________________) Issued: August 19, 2016 ___________________________ Administrative Judge Decision ___________________________ William M. Schwartz, Administrative Judge: This Decision concerns the eligibility of XXXXX XX XXXX. (hereinafter referred to as "the individual") to hold an access authorization 1 under the Department of Energy's (DOE) regulations set forth at 10 C.F.R. Part 710, Subpart A, entitled, "General

  8. The original of this document contains information which is subject to withholdi

    Office of Environmental Management (EM)

    United States Department of Energy Office of Hearings and Appeals In the Matter of: Personnel Security Hearing ) ) Filing Date: June 9, 2016 ) _________________________________________ ) Case No.: PSH-16-0050 Issued: August 31, 2016 _______________ Administrative Judge Decision _______________ Steven L. Fine, Administrative Judge: This Decision concerns the eligibility of XXXX XX XXXX (hereinafter referred to as "the Individual") for access authorization under the Department of

  9. Workplace Charging Challenge Partner: The Valley Health System | Department

    Office of Environmental Management (EM)

    Energy IDEXX Laboratories Workplace Charging Challenge Partner: IDEXX Laboratories Workplace Charging Challenge Partner: IDEXX Laboratories Joined the Challenge: November 2014 Headquarters: Westbrook, ME Charging Location: Westbrook, ME Domestic Employees: 4,300 IDEXX Laboratories is committed to providing a multitude of alternative transportation option to employees in the effort to reduce greenhouse gas emissions and increase sustainability efforts. The IDEXX ParXX program encourages

  10. DATE:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    POLICY FLASH 2014-35 DATE: July 09, 2014 TO: Procurement Directors FROM: Director Contract and Financial Assistance Policy Division Office of Policy Office of Acquisition and Project Management SUBJECT: Rescission of American Recovery and Reinvestment Act Reporting Requirements. SUMMARY: Financial Assistance Letter (FAL) 2014-xx provides COs with: 1) notice of the recession of the reporting requirements for recipients of ARRA funds in accordance with the recently passed P.L. 113- 76,

  11. Basis for Section 3116 Determination for Closure of F-Tank Farm at the Savannah River Site

    Office of Environmental Management (EM)

    Enter Contractor name] FY 20XX [Enter year] Specific Plan for Workforce Restructuring: Involuntary Separation Program for the U.S. Department of Energy or National Nuclear Security Administration [Enter name of DOE or NNSA] Effective: [Enter Month and Year] May be exempt from public release under the Freedom of Information Act (5 USC 552) exemption number and category: #5, Privileged Information. Department of Energy review required before public release. Executive Summary During fiscal year

  12. U

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configuration Management Plan September 2002 TEMPLATE U. S. DEPARTMENT OF ENERGY Organizational Title 1 Organizational Title 2 Change Control Page The following information is being used to control and track modifications made to this document. 1) Revision Date: Author: Section(s): Page Number(s): Summary of Change(s): Title Page Document Name: Project Name Configuration Management Plan Publication Date: Month Year Contract Number: XX-XXXX-XXXXXXXXX Project Number: Task: XXXXXXXXXXXXXX Prepared

  13. Search for new T' particles in final states with large jet multiplicities and missing transverse energy in pp collisions at √s=1.96 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aaltonen, T.

    2011-11-11

    We present a search for a new particle T decaying to a top quark via T = t + X, where X goes undetected. We use a data sample corresponding to 5.7 fb-1 of integrated luminosity of pp collisions with √s = 1.96 TeV, collected at Fermilab Tevatron by the CDF II detector. Our search for pair production of T' is focused on the hadronic decay channel, pp = TT= tt+XX=bqqbqq + XX. We interpret our results in terms of a model where T is an exotic fourth generation quark and X is a dark matter particle. The data aremore » consistent with standard model expectations. We set a limit on the generic production of TT = tt =+ XX, excluding the fourth generation exotic quarks T at 95% confidence level up to mT = 400 GeV/c2 for mX ≤ 70 GeV/c2.« less

  14. Search for Production of Heavy Particles Decaying to Top Quarks and Invisible Particles in $p\\bar{p}$ collisions at $\\sqrt{s}=1.96$ TeV

    SciTech Connect (OSTI)

    Aaltonen, T.; Alvarez Gonzalez, B.; Amerio, S.; Amidei, D.; Anastassov, A.; Annovi, A.; Antos, J.; Apollinari, G.; Appel, J.A.; Apresyan, A.; Arisawa, T.; /Waseda U. /Dubna, JINR

    2011-03-01

    We present a search for a new particle T{prime} decaying to a top-quark via T{prime} {yields} t + X, where X is an invisible particle. In a data sample with 4.8 fb{sup -1} of integrated luminosity collected by the CDF II detector at Fermilab in p{bar p} collisions with {radical}s = 1.96 TeV, we search for pair production of T0 in the lepton+jets channel, p{bar p} {yields} t{bar t} + XX {yields} {ell}{nu}bqq{prime}b + XX. We interpret our results primarily in terms of a model where T{prime} are exotic fourth generation quarks and X are dark matter particles. The data are consistent with standard model expectations, and we set 95% confidence level limits on the generic production of T{prime}{bar T}{prime} {yields} t{bar t} + XX. We apply these limits to the dark matter model and exclude the fourth generation exotic quarks T{prime} at 95% confidence level up to m{sub T{prime}} = 360 GeV/c{sup 2} for m{sub x} {<=} 100 GeV/c{sup 2}.

  15. X and Y chromosome behavior in brain tumors: Pieces in a puzzle

    SciTech Connect (OSTI)

    Hecht, B.K. [Hecht Associates, Jacksonville, FL (United States); Chatel, M; Gioanni, J. [Univ. of Nice (France)] [and others

    1994-09-01

    Sex chromosome behavior in selected somatic cells is baffling. We serendipitously encountered this sex chromosome shuffle while studying malignant gliomas. Tumor specimens from 3/10 (30%) females and 15/27 (56%) males had sex chromosome abnormalities. Specimens from females showed X loss in 2 cases and possible X gain in 1 case. In 2 cases with autosomal abnormalities, only XX cells were found, suggesting that sex chromosome changes are independent of autosomal changes. Specimens from males showed Y rearrangements in 3 cases, Y loss in 15 cases, XX in 3 cases and autosomal abnormalities in 9 cases. The Y rearrangements may provide a route to Y loss whereas the advent of XX clones in male tumors bespeaks X isodisomy, a mechanism for adding an extra active X. The autosomal changes were rearrangements against a pseudo-diploid background in 5 cases and near-triploidy/tetraploidy in 4 cases. The cases with autosomal changes tended not to have sex chromosome abnormalities (p<0.01) and, the converse, cases with sex chromosome anomalies were without autosomal abnormalities (p<0.05). The process of sex chromosome changes appears independent of the process of autosomal changes. The conventional interpretation: the sex chromosome changes in brain tumors are in non-malignant cells. An unconventional interpretation: sex chromosome changes represent an alternative avenue to malignancy.

  16. Search for new T' particles in final states with large jet multiplicities and missing transverse energy in pp? collisions at ?s=1.96 TeV

    SciTech Connect (OSTI)

    Aaltonen, T.

    2011-11-11

    We present a search for a new particle T' decaying to a top quark via T' = t + X, where X goes undetected. We use a data sample corresponding to 5.7 fb-1 of integrated luminosity of pp? collisions with ?s = 1.96 TeV, collected at Fermilab Tevatron by the CDF II detector. Our search for pair production of T' is focused on the hadronic decay channel, pp? = T'T' ?= tt?+XX?=bqq?b?q?q + XX?. We interpret our results in terms of a model where T' is an exotic fourth generation quark and X is a dark matter particle. The data are consistent with standard model expectations. We set a limit on the generic production of T'T' ? = tt ?=+ XX?, excluding the fourth generation exotic quarks T' at 95% confidence level up to mT` = 400 GeV/c2 for mX ? 70 GeV/c2.

  17. Relative ion expansion velocity in laser-produced plasmas

    SciTech Connect (OSTI)

    Goldsmith, S.; Moreno, J.C.; Griem, H.R.; Cohen, L.; Richardson, M.C.

    1988-07-15

    The spectra of highly ionized titanium, TiXIII through TiXXI, and CVI Lyman lines were excited in laser-produced plasmas. The plasma was produced by uniformly irradiating spherical glass microballoons coated with thin layers of titanium and parylene. The 24-beam Omega laser system produced short, 0.6 ns, and high intensity, 4 x 10/sup 14/ W/cm,/sup 2/ laser pulses at a wavelength of 351 nm. The measured wavelength for the 2p-3s TiXIII resonance lines had an average shift of +0.023 A relative to the CVI and TiXX spectral lines. No shift was found between the CVI, TiXIX, and TiXX lines. The shift is attributed to a Doppler effect, resulting from a difference of (2.6 +- 0.2) x 10/sup 7/ cm/s in the expansion velocities of TiXIX and TiXX ions compared to TiXIII ions.

  18. APS Science 2006.

    SciTech Connect (OSTI)

    Gibson, J. M.; Fenner, R. B.; Long, G.; Borland, M.; Decker, G.

    2007-05-24

    In my five years as the Director of the Advanced Photon Source (APS), I have been fortunate to see major growth in the scientific impact from the APS. This year I am particularly enthusiastic about prospects for our longer-term future. Every scientific instrument must remain at the cutting edge to flourish. Our plans for the next generation of APS--an APS upgrade--got seriously in gear this year with strong encouragement from our users and sponsors. The most promising avenue that has emerged is the energy-recovery linac (ERL) (see article on page xx), for which we are beginning serious R&D. The ERL{at}APS would offer revolutionary performance, especially for x-ray imaging and ultrafast science, while not seriously disrupting the existing user base. I am very proud of our accelerator physics and engineering staff, who not only keep the current APS at the forefront, but were able to greatly impress our international Machine Advisory Committee with the quality of their work on the possible upgrade option (see page xx). As we prepare for long-term major upgrades, our plans to develop and optimize all the sectors at APS in the near future are advancing. Several new beamlines saw first light this year, including a dedicated powder diffraction beamline (11-BM), two instruments for inelastic x-ray scattering at sector 30, and the Center for Nanoscale Materials (CNM) Nanoprobe beamline at sector 26. Our partnership in the first x-ray free-electron laser (LCLS) to be built at Stanford contributes to revolutionary growth in ultrafast science (see page xx), and we are developing a pulse chirping scheme to get ps pulses at sector 7 of the APS within a year or so. In this report, you will find selected highlights of scientific research at the APS from calendar year 2006. The highlighted work covers diverse disciplines, from fundamental to applied science. In the article on page xx you can see the direct impact of APS research on technology. Several new products have emerged from

  19. SuperhydrophobicCoatings.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...locatecorsci Available online at www.sciencedirect.com Corrosion Science xxx (2007) xxx-xxx CS 2881 No. of Pages 6, Model 5+ 1 December 2007 Disk Used ARTICLE IN PRESS ...

  20. ARM - Ingest Associated Status Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Please note that datastreams beginning in "xxx" indicate cases where ingests run at ... The following datastreams are generated: xxx5ebbrFn.b1, 5-minute data xxx15ebbrFn.b1, ...

  1. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Please note that ingests beginning in "xxx" indicate cases where ingests are ran at ... The following datastreams are generated: xxx5ebbrFn.b1, 5 minute data xxx15ebbrFn.b1, 15 ...

  2. ARM TR-008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... - 8 minutes or 20-second data Where: xxx - the locations of the instrument (nsa, ... Where: xxx - the location of the instrument (nsa, sgp, twp) aeri - the main instrument ...

  3. The original of this document contains information which is subject...

    Energy Savers [EERE]

    Steven L. Fine, Administrative Judge: This Decision concerns the eligibility of XXX X. XXX (hereinafter referred to as "the Individual") for access authorization under the ...

  4. Form W-8 BEN-E (Rev. April 2016)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the form in Part XXX. For Paperwork Reduction Act Notice, see separate instructions. ... Name Address TIN Part XXX Certification Under penalties of perjury, I declare that I have ...

  5. ARM XDC Datastreams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The remaining passbands are constructed with DF-xxx series integrated ... The passbands on the UVMFRSR are constructed with DF-xxx series integrated ...

  6. Dawid Zawislak | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dawid Zawislak Research Aide - Operations Team Dawid Zawislak Argonne National Laboratory 9700 S. Cass Avenue Building 240 Wkstn. 1D30 Argonne, IL 60439 xxx-xxx-xxxx ...

  7. Department of Energy

    Office of Environmental Management (EM)

    ... action from NETL would state (NETLDOE xxx); (2) (Official Use Only); (3) Section 301 ... subject line follows: "Subject: (NETLDOE xxx) (Official Use Only) Congressional Notice - ...

  8. Microsoft Word - Policy Flash 2012-22 Attachment AL 2012-07...

    Office of Environmental Management (EM)

    ... action from NETL would state (NETLDOE xxx); (2) (Official Use Only); (3) Section 311 ... subject line follows: "Subject: (NETLDOE xxx) (Official Use Only) Section 311 Notice - ...

  9. ARM - Datastreams - aossmps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... ( time ) Sheath flow lmin sheathflow ( time ) Status flag (0normal scan, 1 xxx, 2xxx) unitless statusflag ( time ) Time offset from midnight time ( time ) Time offset ...

  10. Microsoft Word - cug2010_JobComp.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Initially identifying these nodes via console log "beer" messages of "cpu xxx has been ... valid UIDs, which was associated with "lgetgroups: no such user xxx" messages in syslog. ...

  11. BPA-2015-00051-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on this form. Name Carrie Henderson Email Organiz ation Mailing Address City State Phone FAX Ex. xxx-xxx-xxxx Date Redd: 1082014 Due Date: 1162014 Tracking Number;...

  12. DOE/EIA-M059(2012)

    Gasoline and Diesel Fuel Update (EIA)

    bblcd Planned marginal refinery capacity HBIOCAP(MNUMPR) M bblcd BTL utilized capacity LEARNING PARAMETERS FOR BPU, BTL (XXX)PhaseICut of units (XXX) BPU, BTL...

  13. DOE/EIA-M059(2011)

    Gasoline and Diesel Fuel Update (EIA)

    bblcd Planned marginal refinery capacity HBIOCAP(MNUMPR) M bblcd BTL utilized capacity LEARNING PARAMETERS FOR BPU, BTL (XXX)PhaseICut of units (XXX) BPU, BTL...

  14. DOE/EIA-M059(2010)

    Gasoline and Diesel Fuel Update (EIA)

    bblcd Planned marginal refinery capacity HBIOCAP(MNUMPR) M bblcd BTL utilized capacity LEARNING PARAMETERS FOR BPU, BTL (XXX)PhaseICut of units (XXX) BPU, BTL...

  15. A User’s Guide to the Comprehensive Water Quality Database for Groundwater in the Vicinity of the Nevada Test Site, Rev. No.: 1

    SciTech Connect (OSTI)

    Farnham, Irene

    2006-09-01

    This water quality database (viz.GeochemXX.mdb) has been developed as part of the Underground Test Area (UGTA) Program with the cooperation of several agencies actively participating in ongoing evaluation and characterization activities under contract to the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The database has been constructed to provide up-to-date, comprehensive, and quality controlled data in a uniform format for the support of current and future projects. This database provides a valuable tool for geochemical and hydrogeologic evaluations of the Nevada Test Site (NTS) and surrounding region. Chemistry data have been compiled for groundwater within the NTS and the surrounding region. These data include major ions, organic compounds, trace elements, radionuclides, various field parameters, and environmental isotopes. Colloid data are also included in the database. The GeochemXX.mdb database is distributed on an annual basis. The extension ''XX'' within the database title is replaced by the last two digits of the release year (e.g., Geochem06 for the version released during the 2006 fiscal year). The database is distributed via compact disc (CD) and is also uploaded to the Common Data Repository (CDR) in order to make it available to all agencies with DOE intranet access. This report provides an explanation of the database configuration and summarizes the general content and utility of the individual data tables. In addition to describing the data, subsequent sections of this report provide the data user with an explanation of the quality assurance/quality control (QA/QC) protocols for this database.

  16. NREL Bilateral Nondisclosure Agreement - Sample

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (REV 07/09) Page 1 of 3 BILATERAL NON-DISCLOSURE AGREEMENT No. XX - XXXX ("Agreement") This Agreement is entered into by and between the Alliance for Sustainable Energy, LLC ("Alliance"), the Manager and Operator of the National Renewable Energy Laboratory ("NREL") under Prime Contract No. DE- AC36-08GO28308 for the U.S. Department of Energy (the "DOE"), located at 15013 Denver West Parkway, Golden, CO, 80401 and COMPANY NAME ("Company"), whose

  17. NREL Unilateral Nondisclosure Agreement - Company Disclosing - Sample

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REV 07/09) Page 1 of 2 UNILATERAL (IN) NON-DISCLOSURE AGREEMENT No. XX - XXXX ("Agreement") This Agreement is entered into by and between the Alliance for Sustainable Energy, LLC ("Alliance"), the Manager and Operator of the National Renewable Energy Laboratory ("NREL") under Prime Contract No. DE- AC36-08GO28308 for the U.S. Department of Energy (the "DOE"), located at 15013 Denver West Parkway, Golden, CO 80401, and DISCLOSING PARTY NAME

  18. ¢¡¤£¦¥¨§© "!$#%'&()102)3¥¨46578)@9A4B@8CD§E)1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     "!$#%'&()102)3¥¨46578)@9A4B@8CD§E)1'FG H©I5QPSR6¥¨§E£E§¦¥GT UI024§E)¢V'RS402XWY4` a )D¡b £ cedgfihqpIr8fgsit¤uwvXx€ybx€fg‚

  19. Helen He, David Turner, Richard Gerber NUG Monthly Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    David Turner, Richard Gerber NUG Monthly Meeting --- 1 --- NUG M onthly M ee-ng July 1 0, 2 014 Zhengji Zhao " NERSC User Services Group" " NUG Monthly 2014 " July 10, 2014 Edison Issues Since the 6/25 upgrade Upgrades on Edison on 6/25 (partial list) * Maintenance/Configura-on M odifica-ons - set C DT 1 .16 t o d efault * Upgrades on Edison login nodes - SLES 1 1 S P3 - BCM 6 .1 - ESM---XX---3.0.0 - ESL---XC---2.2.0 * Upgrades on main frame - Sonexion u pdate_cs.1.3.1---007

  20. "PART 1: ENERGY/WATER CONSUMPTION AND COST DATA"

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adjustment Data Report for Fiscal Years Prior to 2008" ,,,"FY","20XX" "Agency:","Department of X",,,"Prepared by:" "Date:",,,,"Phone:" "PART 1: ENERGY/WATER CONSUMPTION AND COST DATA" "1-1. NECPA/E.O. 13423 Goal Subject Buildings" "Energy Type","Consumption Units","Annual Consumption","Annual Cost (Thou. $)","Unit Cost ($)",,"Site-Delivered Btu

  1. untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UCRd1950 Unclassified-Chemistry Distribution U P I r n I T Y OF CALIFORNIA Radiation Laboratory Contract No. V-7405-eng-48 THE PATH OF CllRBOM I N PHOTOSYNTHFSIS. XX. THE STEADY STATE M. Calvin and Peter Massini September, 1952 Berkeley, California THE PATH O F C A R B O N IA? PHOTOSYfJTHESIS, no TKE STEWY S T A T E E 35 M a Calvin and Peter h s s f n i Radiation Labmatmy and Deparktienfi of Chemistry7 University of D a l i f ornia, ~crkeley** (*) Fellow of the Swias Foundation, mStStiftunk f k

  2. Evaluation of delivered monitor unit accuracy of gated step-and-shoot IMRT using a two-dimensional detector array

    SciTech Connect (OSTI)

    Cheong, Kwang-Ho; Kang, Sei-Kwon; Lee, MeYeon; Kim, Su SSan; Park, SoAh; Hwang, Tae-Jin; Kim, Kyoung Ju; Oh, Do Hoon; Bae, Hoonsik; Suh, Tae-Suk

    2010-03-15

    Purpose: To overcome the problem of organ motion in intensity-modulated radiation therapy (IMRT), gated IMRT is often used for the treatment of lung cancer. In this study, the authors investigated the accuracy of the delivered monitor units (MUs) from each segment during gated IMRT using a two-dimensional detector array for user-specific verification purpose. Methods: The authors planned a 6 MV photon, seven-port step-and-shoot lung IMRT delivery. The respiration signals for gated IMRT delivery were obtained from the one-dimensional moving phantom using the real-time position management (RPM) system (Varian Medical Systems, Palo Alto, CA). The beams were delivered using a Clinac iX (Varian Medical Systems, Palo Alto, CA) with the Millennium 120 MLC. The MatriXX (IBA Dosimetry GmbH, Germany) was validated through consistency and reproducibility tests as well as comparison with measurements from a Farmer-type ion chamber. The authors delivered beams with varying dose rates and duty cycles and analyzed the MatriXX data to evaluate MU delivery accuracy. Results: There was quite good agreement between the planned segment MUs and the MUs computed from the MatriXX within {+-}2% error. The beam-on times computed from the MatriXX data were almost identical for all cases, and they matched well with the RPM beam-on and beam-off signals. A slight difference was observed between them, but it was less than 40 ms. The gated IMRT delivery demonstrated an MU delivery accuracy that was equivalent to ungated IMRT, and the delivered MUs with a gating signal agreed with the planned MUs within {+-}0.5 MU regardless of dose rate and duty cycle. Conclusions: The authors can conclude that gated IMRT is able to deliver an accurate dose to a patient during a procedure. The authors believe that the methodology and results can be transferred to other vendors' devices, particularly those that do not provide MLC log data for a verification purpose.

  3. Proceedings of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    xx by ASME 31 st International Conference on Ocean Offshore and Arctic Engineering (OMAE) June 10-15, 2012, Rio de Janeiro, Brazil OMAE 2012 - 84074 Marine Hydrokinetic Turbine Power-Take-Off Design for Optimal Performance and Low Impact on Cost-of-Energy Mike J. Beam Applied Research Lab / Penn State University PO Box 30, State College, PA, 16804-0030 Brian l. Kline Applied Research Lab / Penn State University PO Box 30, State College, PA, 16804-0030 William Straka ARL / PSU State College, PA,

  4. Proceedings of the 34th International Conference in High Energy Physics (ICHEP08), Philadelphia, PA, 2008, eConf C080730, [hep-ph/0809.xxx

    SciTech Connect (OSTI)

    Lockyer, Nigel S.; Smith, AJ Stewart,; et. al.

    2008-09-01

    In 2004 a team from the University of Pennsylvania, Princeton University, and the Institute for Advanced Study proposed to host the 2008 International Conference on High Energy Physics (ICHEP) on the campus of the University of Pennsylvania in Philadelphia. The proposal was approved later that year by the C-11 committee of the International Union of Pure and Applied Physics. The Co-Chairs were Nigel S. Lockyer (U. Penn/TRIUMF) and A.J. Stewart Smith (Princeton); Joe Kroll of U. Penn served as Deputy Chair from 2007 on. Highlights of the proposal included 1. greatly increased participation of young scientists, women scientists, and graduate students 2. new emphasis on formal theory 3. increased focus on astrophysics and cosmology 4. large informal poster session (170 posters) in prime time 5. convenient, contiguous venues for all sessions and lodging 6. landmark locations for the reception and banquet. The conference program consisted of three days of parallel sessions and three days of plenary talks.

  5. The terminator "toy" chemistry test: A simple tool to assess errors in transport schemes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lauritzen, P. H.; Conley, A. J.; Lamarque, J. -F.; Vitt, F.; Taylor, M. A.

    2015-05-04

    This test extends the evaluation of transport schemes from prescribed advection of inert scalars to reactive species. The test consists of transporting two interacting chemical species in the Nair and Lauritzen 2-D idealized flow field. The sources and sinks for these two species are given by a simple, but non-linear, "toy" chemistry that represents combination (X+X → X2) and dissociation (X2 → X+X). This chemistry mimics photolysis-driven conditions near the solar terminator, where strong gradients in the spatial distribution of the species develop near its edge. Despite the large spatial variations in each species, the weighted sum XT = X+2X2more » should always be preserved at spatial scales at which molecular diffusion is excluded. The terminator test demonstrates how well the advection–transport scheme preserves linear correlations. Chemistry–transport (physics–dynamics) coupling can also be studied with this test. Examples of the consequences of this test are shown for illustration.« less

  6. The terminator "toy" chemistry test: A simple tool to assess errors in transport schemes

    SciTech Connect (OSTI)

    Lauritzen, P. H.; Conley, A. J.; Lamarque, J. -F.; Vitt, F.; Taylor, M. A.

    2015-05-04

    This test extends the evaluation of transport schemes from prescribed advection of inert scalars to reactive species. The test consists of transporting two interacting chemical species in the Nair and Lauritzen 2-D idealized flow field. The sources and sinks for these two species are given by a simple, but non-linear, "toy" chemistry that represents combination (X+X → X2) and dissociation (X2X+X). This chemistry mimics photolysis-driven conditions near the solar terminator, where strong gradients in the spatial distribution of the species develop near its edge. Despite the large spatial variations in each species, the weighted sum XT = X+2X2 should always be preserved at spatial scales at which molecular diffusion is excluded. The terminator test demonstrates how well the advection–transport scheme preserves linear correlations. Chemistry–transport (physics–dynamics) coupling can also be studied with this test. Examples of the consequences of this test are shown for illustration.

  7. Superfluid density and Berezinskii-Kosterlitz-Thouless transition of a spin-orbit-coupled Fulde-Ferrell superfluid

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cao, Ye; Liu, Xia -Ji; He, Lianyi; Long, Gui -Lu; Hu, Hui

    2015-02-09

    We theoretically investigate the superfluid density and Berezinskii-Kosterlitz-Thouless (BKT) transition of a two-dimensional Rashba spin-orbit-coupled atomic Fermi gas with both in-plane and out-of-plane Zeeman fields. It was recently predicted that, by tuning the two Zeeman fields, the system may exhibit different exotic Fulde-Ferrell (FF) superfluid phases, including the gapped FF, gapless FF, gapless topological FF, and gapped topological FF states. Due to the FF paring, we show that the superfluid density (tensor) of the system becomes anisotropic. When an in-plane Zeeman field is applied along the x direction, the tensor component along the y direction ns,yy is generally larger thanmore » ns,xx in most parameter space. At zero temperature, there is always a discontinuity jump in ns,xx as the system evolves from a gapped FF into a gapless FF state. With increasing temperature, such a jump is gradually washed out. The critical BKT temperature has been calculated as functions of the spin-orbit-coupling strength, interatomic interaction strength, and in-plane and out-of-plane Zeeman fields. We predict that the novel FF superfluid phases have a significant critical BKT temperature, typically at the order of 0.1TF, where TF is the Fermi degenerate temperature. Furthermore, their observation is within the reach of current experimental techniques in cold-atom laboratories.« less

  8. Feasibility study of volumetric modulated arc therapy with constant dose rate for endometrial cancer

    SciTech Connect (OSTI)

    Yang, Ruijie; Wang, Junjie; Xu, Feng; Li, Hua; Zhang, Xile

    2013-10-01

    To investigate the feasibility, efficiency, and delivery accuracy of volumetric modulated arc therapy with constant dose rate (VMAT-CDR) for whole-pelvic radiotherapy (WPRT) of endometrial cancer. The nine-field intensity-modulated radiotherapy (IMRT), VMAT with variable dose-rate (VMAT-VDR), and VMAT-CDR plans were created for 9 patients with endometrial cancer undergoing WPRT. The dose distribution of planning target volume (PTV), organs at risk (OARs), and normal tissue (NT) were compared. The monitor units (MUs) and treatment delivery time were also evaluated. For each VMAT-CDR plan, a dry run was performed to assess the dosimetric accuracy with MatriXX from IBA. Compared with IMRT, the VMAT-CDR plans delivered a slightly greater V{sub 20} of the bowel, bladder, pelvis bone, and NT, but significantly decreased the dose to the high-dose region of the rectum and pelvis bone. The MUs decreased from 1105 with IMRT to 628 with VMAT-CDR. The delivery time also decreased from 9.5 to 3.2 minutes. The average gamma pass rate was 95.6% at the 3%/3 mm criteria with MatriXX pretreatment verification for 9 patients. VMAT-CDR can achieve comparable plan quality with significant shorter delivery time and smaller number of MUs compared with IMRT for patients with endometrial cancer undergoing WPRT. It can be accurately delivered and be an alternative to IMRT on the linear accelerator without VDR capability.

  9. Evaluation of stacking faults and associated partial dislocations in AlSb/GaAs (001) interface by aberration-corrected high-resolution transmission electron microscopy

    SciTech Connect (OSTI)

    Wen, C.; Ge, B. H.; Cui, Y. X.; Li, F. H.; Zhu, J.; Yu, R.; Cheng, Z. Y.

    2014-11-15

    The stacking faults (SFs) in an AlSb/GaAs (001) interface were investigated using a 300 kV spherical aberration-corrected high-resolution transmission electron microscope (HRTEM). The structure and strain distribution of the single and intersecting (V-shaped) SFs associated with partial dislocations (PDs) were characterized by the [110] HRTEM images and geometric phase analysis, respectively. In the biaxial strain maps ?{sub xx} and ?{sub yy}, a SF can be divided into several sections under different strain states (positive or negative strain values). Furthermore, the strain state for the same section of a SF is in contrast to each other in ?{sub xx} and ?{sub yy} strain maps. The modification in the strain states was attributed to the variation in the local atomic displacements for the SF in the AlSb film on the GaAs substrate recorded in the lattice image. Finally, the single SF was found to be bounded by two 30 PDs. A pair of 30 PDs near the heteroepitaxial interface reacted to form a Lomer-Cottrell sessile dislocation located at the vertices of V-shaped SFs with opposite screw components. The roles of misfit dislocations, such as the PDs, in strain relaxation were also discussed.

  10. BPA-2014-00717-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 'WSP Colombia City: Phone: State: Zip: Ex. xxx-xxx-xxxx Please type your request here Hello I would like to ask You, if and where is possible to download a copy of Corona and...

  11. BPA-2014-01713-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kiley Scott Email Kiley.Scott@SNCLavalin.com Organizatio SNC Lavalin T&D n Mailing 150 Whitten Rd Address City Augusta State ME Phone 315-842-0999 Ex. xxx-xxx-xxxx FAX Ex....

  12. Zachary Nault | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zachary Nault HPC Systems Administration Associate - Storage Team Zachary Nault Argonne National Laboratory 9700 S. Cass Avenue Building 240 - Wkstn. 3C7 Argonne, IL 60439 xxx-xxx-xxxx comphyguy@gmail.com

  13. Hopper OS upgrade and new SW set to default next Wed, Feb 27

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The availability of the above software versions were announced on Dec 19 and Jan 18. Notice Cray has changed some of the module names from "xt-xxx" to "cray-xxx", for example: ...

  14. DOE-HDBK-3012-96; Team Leader's Preparation Guide for Operational...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... The following DOE 5500 Series Order Compliance Packet CSAs were reviewed: XXX-DOE-5500.3A-... Another issue of this CSA, is personnel accountability for Outside Facilities, XXX-F, ...

  15. Part B - Requirements & Funding Information PART B - Requirements...

    Office of Environmental Management (EM)

    IA, indicate whether Part A of the IA is attached or the location of Part A. For example, Part A could be located in the master file for IA number xxx at contracting office xxx. ...

  16. DOE-HDBK-3012-2003; DOE Handbook Guide to Good Practices for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Technical baselines for the XXX Wet Chemistry processes have been defined in accordance ... 37 DOE-HDBK-3012-2003 that are not already captured by the XXX Wet Chemistry restart plan. ...

  17. Part B - Requirements & Funding Information PART B - Requirements...

    Broader source: Energy.gov (indexed) [DOE]

    ... IA, indicate whether Part A of the IA is attached or the location of Part A. For example, Part A could be located in the master file for IA number xxx at contracting office xxx. ...

  18. Pynamic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    At the end of the build and configure, the following data will be reported. Size of aggregate total of shared libraries: XXX Size of aggregate texts of shared libraries: XXX Size ...

  19. Microsoft PowerPoint - ID 876 TourBooklet_revb_Geology [Compatibility...

    Office of Environmental Management (EM)

    Booklet 12102014 - Page 2 Log No. 2014-xxx Nevada National Security Site (NNSS) * NNSS ... Booklet 12102014 - Page 3 Log No. 2014-xxx * 1,149 total U.S. U.S.-U.K. nuclear ...

  20. Microsoft Word - CCP-TP-005-Revision 26

    Office of Environmental Management (EM)

    ... Guide for AK Summary Reports CCP-AK-SITE-XXX Central Characterization Program Acceptable ... of this RH waste stream. CCP-AK-ORNL-XXX, CCP RH TRU Waste Certification Plan for 40 ...

  1. TGS Report Template

    Broader source: Energy.gov (indexed) [DOE]

    ... The address for delivery of equipment, materials, and packages is: XXX 2.3.2. Tennessee ... of equipment, materials, and packages is: XXX 2.3.3. Arkansas Entergy Station is a 500MW ...

  2. Hopper Featured Announcements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The availability of the above software versions were announced on Dec 19 and Jan 18. Notice Cray has changed some of the module names from "xt-xxx" to "cray-xxx", for example: ...

  3. Metrology for Sustainable Nanomaterials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Do instruments of the same class provide the same answers to the question: "How XXX* is it" * Interlab Study data from the same lab XXX*- fill in the blank: big, composition, etc. ...

  4. ARM Data File Standards: Version 1.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... (sss)(inst)(Fn).(dl).(yyyymmdd).(hhmmss).(xxx).(zzz).tar ARM Standards Committee, May ... the file or an instrument serial number. (xxx) is lower-case characters or numbers used ...

  5. ARM Climate Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ...wrret1liljclouFF.cN.YYYYMMDD.hhmmss where: XXX the location of the instrument (nsa, sgp, ... Datastream Variable Name Variable Long Name Units XXXmwrlosFF.b1 XXX is all sites tbsky23 ...

  6. ARM Climate Research Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Long Name Units XXXbeflux1longFF. c1 XXX is sgp FF is C1 downshorthemisp ... Normal Irradiance Wm2 XXXirt25mFF.b1 XXX is sgp FF is C1 upshorthemisp Upwelling ...

  7. BPA-2013-00104-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organization Gradient Mailing Address 20 University Road 5th Floor City Cambridge State MA Zip 02138 Phone 617-395-5570 Ex. xxx-xxx-xxxx FAX 617-395-5000 Ex....

  8. BPA-2014-00537-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Act must be signed and, therefore, cannot be submitted on this form. Name Bryan Edwards Email Orga nizati on Mailin g Addre ss City State Phon C FAX Ex. xxx-xxx-xxxx...

  9. BPA-2014-00854-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    e Ex. FAX 650-859-5149 Ex. xxx-xxx-xxxx Monday, April 14, 2014 3:46 PM Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be...

  10. BPA-2015-00018-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FAX Ex. xxx-xxx-xxxx Zip 20637 Friday, October 3, 2014 6:16 a.m. Submitted by Anonymous User This message was created by a Microsoft InfoPath form. The form data may be...

  11. Section 34

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    x ' j N r'1 C xr j N s'1 A &1 rs N s (2 &2 x ) 2 ' C xx & j N r,s'1 C xr C xs A &1 rs F(x) ' exp(&x 2 / R 2 c ) % e < exp(&x 2 / R 2 n ) Session Papers 149 (1) (2) (3) Estimation of Errors in Objectively Analyzed Fields and Sensitivity to Number and Spacing of Stations M.J. Leach, J.J. Yio, and R.T. Cederwall Atmospheric Science Division Lawrence Livermore National Laboratory Livermore, California Motivation Single-column models (SCMs) are designed to test param-

  12. Effect of enhanced C{sub 2} growth chemistry on nanodiamond film deposition

    SciTech Connect (OSTI)

    Teii, Kungen; Ikeda, Tomohiro

    2007-03-12

    A route to high-purity nanocrystalline diamond films from C{sub 2} dimers and related mechanisms have been investigated by enhancing C{sub 2} growth chemistry in Ar-rich microwave plasmas. Efficient C{sub 2} production by direct dissociation from acetylene causes the micro- to nanocrystal transition with a low threshold Ar concentration of {approx}70% and produces films of {approx}20 nm grains with a distinct visible-Raman peak of diamond. C{sub 2} grows nanodiamond on diamond surfaces but rarely initiates nucleation on foreign surfaces. The phase purity can be improved by increasing the dominance of nanodiamond growth from C{sub 2} over nondiamond growth from CH{sub x}(x=0-3) and large radicals.

  13. Casimir effect in the nonequilibrium steady state of a quantum spin chain

    SciTech Connect (OSTI)

    Gonzalez-Cabrera, D. L.; Racz, Z.

    2010-05-15

    We present a fully microscopics-based calculation of the Casimir effect in a nonequilibrium system, namely, an energy-flux-driven quantum XX chain. The force between the walls (transverse-field impurities) is calculated in a nonequilibrium steady state which is prepared by letting the system evolve from an initial state with the two halves of the chain prepared at equilibrium at different temperatures. The steady state emerging in the large-time limit is homogeneous but carries an energy flux. The Casimir force in this nonequilibrium state is calculated analytically in the limit when the transverse fields are small. We find that the the Casimir force range is reduced compared to the equilibrium case, and suggest that the reason for this is the reduction of fluctuations in the flux-carrying steady state.

  14. Polynomial solutions of the Monge-Ampre equation

    SciTech Connect (OSTI)

    Aminov, Yu A

    2014-11-30

    The question of the existence of polynomial solutions to the Monge-Ampre equation z{sub xx}z{sub yy}?z{sub xy}{sup 2}=f(x,y) is considered in the case when f(x,y) is apolynomial. It is proved that if f is apolynomial of the second degree, which is positive for all values of its arguments and has apositive squared part, then no polynomial solution exists. On the other hand, asolution which is not polynomial but is analytic in the whole of the x,y-plane is produced. Necessary and sufficient conditions for the existence of polynomial solutions of degree up to 4 are found and methods for the construction of such solutions are indicated. An approximation theorem is proved. Bibliography: 10 titles.

  15. Dispersion of the linear and nonlinear optical susceptibilities of the CuAl(S{sub 1x}Se{sub x})? mixed chaclcopyrite compounds

    SciTech Connect (OSTI)

    Reshak, A. H.; Brik, M. G.; Auluck, S.

    2014-09-14

    Based on the electronic band structure, we have calculated the dispersion of the linear and nonlinear optical susceptibilities for the mixed CuAl(S{sub 1x}Se{sub x})? chaclcopyrite compounds with x=0.0, 0.25, 0.5, 0.75, and 1.0. Calculations are performed within the Perdew-Becke-Ernzerhof general gradient approximation. The investigated compounds possess a direct band gap of about 2.2 eV (CuAlS?), 1.9 eV (CuAl(S?.??Se?.??)?), 1.7 eV (CuAl(S?.?Se?.?)?), 1.5 eV (CuAl(S?.??Se?.??)?), and 1.4 eV (CuAlSe?) which tuned to make them optically active for the optoelectronics and photovoltaic applications. These results confirm that substituting S by Se causes significant band gaps' reduction. The optical function's dispersion ??{sup xx}(?) and ??{sup zz}(?)/??{sup xx}(?), ??{sup yy}(?), and ??{sup zz}(?) was calculated and discussed in detail. To demonstrate the effect of substituting S by Se on the complex second-order nonlinear optical susceptibility tensors, we performed detailed calculations for the complex second-order nonlinear optical susceptibility tensors, which show that the neat parents compounds CuAlS? and CuAlSe? exhibit | ????}(-2?;?;?) | as the dominant component, while the mixed alloys exhibit | ????(-2?;?;?) | as the dominant component. The features of | ????}(-2?;?;?) | and | ?{sub 111}}(-2?;?;?) | spectra were analyzed on the basis of the absorptive part of the corresponding dielectric function ??(?) as a function of both ?/2 and ?.

  16. Loss of sex chromosomes in the hematopoietic disorders: Questions, concerns and data interpretation

    SciTech Connect (OSTI)

    Slovak, M.L. [City of Hope National Medical Center, Duarte, CA (United States)

    1994-09-01

    The significance of sex chromosome aberrations in the hematopoietic disorders has not yet been defined. Interpretive problems stem from (1) the loss of a sex chromosome associated with aging, (2) sex chromosome loss as the sole aberration in leukemia is rare, (3) random -(X or Y) is observed frequently in bone marrow samples, and (4) constitutional sex chromosome anomalies must be ruled out in cancer and follow-up may not be possible. The COH database identified 41 patients (pts) with sex chromosome loss. Loss of a sex chromosome was common in myeloid disorders (21/41). In t(8;21) leukemia (n=10), -(X or Y) was a common secondary karyotypic change. Additionally, -Y was associated with clonal evolution in 2 Ph + CML pts. In 2 elderly pts with myeloid disorders, -(X or Y) was observed in complex karyotypes with dmins; however, in the lymphoproliferative disorders -(X or Y) was noted in elderly pts without apparent pathogenetic significance. Three pts had constitutional sex chromosome aberrations: CML in 45,X; ALL in 47, XXY; and RAEB-IT in mos45,X/46,XX. In the mos45,X/46,XX pt, the leukemic clone was associated with the 45,X line without other karyotypic changes. Non-clonal aberrations were observed in 11 cases; in 3 cases these non-clonal losses were observed in serial samples. In a sex-mismatched BMT case, -(X or Y) in 4 cells was one of the first pathogenetic signs of leukemia relapse. These data suggest (1) interpretation of sex chromosome loss in leukemia must be made with caution and after a baseline sample, (2) non-clonal aberrations should be recorded, and (3) -(X or Y) appears to have pathogenetic significance in the myeloid disorders. Multi-institutional studies are needed to define (1) the incidence of leukemia in pts with constitutional sex chromosome anomalies and (2) the incidence and significance of sex chromosome aberrations as the primary (sole) cytogenetic aberration in leukemia.

  17. Carrier Multiplication in Semiconductor Nanocrystals: Theoretical Screening of Candidate Materials Based on Band-Structure Effects

    SciTech Connect (OSTI)

    Luo, J. W.; Franceschetti, A.; Zunger, A.

    2008-01-01

    Direct carrier multiplication (DCM) occurs when a highly excited electron-hole pair decays by transferring its excess energy to the electrons rather than to the lattice, possibly exciting additional electron-hole pairs. Atomistic electronic structure calculations have shown that DCM can be induced by electron-hole Coulomb interactions, in an impact-ionization-like process whose rate is proportional to the density of biexciton states {rho}{sub XX}. Here we introduce a DCM 'figure of merit' R{sub 2}(E) which is proportional to the ratio between the biexciton density of states {rho}{sub XX} and the single-exciton density of states {rho}{sub x}, restricted to single-exciton and biexciton states that are coupled by Coulomb interactions. Using R{sub 2}(E), we consider GaAs, InAs, InP, GaSb, InSb, CdSe, Ge, Si, and PbSe nanocrystals of different sizes. Although DCM can be affected by both quantum-confinement effects (reflecting the underly electronic structure of the confined dot-interior states) and surface effects, here we are interested to isolate the former. To this end the nanocrystal energy levels are obtained from the corresponding bulk band structure via the truncated crystal approximation. We find that PbSe, Si, GaAs, CdSe, and InP nanocrystals have larger DCM figure of merit than the other nanocrystals. Our calculations suggest that high DCM efficiency requires high degeneracy of the corresponding bulk band-edge states. Interestingly, by considering band structure effects we find that as the dot size increases the DCM critical energy E{sub 0} (the energy at which R{sub 2}(E) becomes {ge}1) is reduced, suggesting improved DCM. However, whether the normalized E{sub 0}/{var_epsilon}{sub g} increases or decreases as the dot size increases depends on dot material.

  18. Methods for separating oxygen from oxygen-containing gases

    DOE Patents [OSTI]

    Mackay, Richard; Schwartz, Michael; Sammells, Anthony F.

    2000-01-01

    This invention provides mixed conducting metal oxides particularly useful for the manufacture of catalytic membranes for gas-phase oxygen separation processes. The materials of this invention have the general formula: A.sub.x A'.sub.x A".sub.2-(x+x') B.sub.y B'.sub.y B".sub.2-(y+y') O.sub.5+z ; where x and x' are greater than 0; y and y' are greater than 0; x+x' is less than or equal to 2; y+y' is less than or equal to 2; z is a number that makes the metal oxide charge neutral; A is an element selected from the f block lanthanide elements; A' is an element selected from Be, Mg, Ca, Sr, Ba and Ra; A" is an element selected from the f block lanthanides or Be, Mg, Ca, Sr, Ba and Ra; B is an element selected from the group consisting of Al, Ga, In or mixtures thereof; and B' and B" are different elements and are independently selected from the group of elements Mg or the d-block transition elements. The invention also provides methods for oxygen separation and oxygen enrichment of oxygen deficient gases which employ mixed conducting metal oxides of the above formula. Examples of the materials used for the preparation of the membrane include A.sub.x Sr.sub.x' B.sub.y Fe.sub.y' Co.sub.2-(y+y') O.sub.5+z, where x is about 0.3 to about 0.5, x' is about 1.5 to about 1.7, y is 0.6, y' is between about 1.0 and 1.4 and B is Ga or Al.

  19. SU-E-T-421: Feasibility Study of Volumetric Modulated Arc Therapy with Constant Dose Rate for Endometrial Cancer

    SciTech Connect (OSTI)

    Yang, R; Wang, J

    2014-06-01

    Purpose: To investigate the feasibility, efficiency, and delivery accuracy of volumetric modulated arc therapy with constant dose rate (VMAT-CDR) for whole-pelvic radiotherapy (WPRT) of endometrial cancer. Methods: The nine-Field intensity-modulated radiotherapy (IMRT), VMAT with variable dose-rate (VMAT-VDR), and VMAT-CDR plans were created for 9 patients with endometrial cancer undergoing WPRT. The dose distribution of planning target volume (PTV), organs at risk (OARs), and normal tissue (NT) were compared. The monitor units (MUs) and treatment delivery time were also evaluated. For each VMAT-CDR plan, a dry Run was performed to assess the dosimetric accuracy with MatriXX from IBA. Results: Compared with IMRT, the VMAT-CDR plans delivered a slightly greater V20 of the bowel, bladder, pelvis bone, and NT, but significantly decreased the dose to the high-dose region of the rectum and pelvis bone. The MUs Decreased from 1105 with IMRT to 628 with VMAT-CDR. The delivery time also decreased from 9.5 to 3.2 minutes. The average gamma pass rate was 95.6% at the 3%/3 mm criteria with MatriXX pretreatment verification for 9 patients. Conclusion: VMAT-CDR can achieve comparable plan quality with significant shorter delivery time and smaller number of MUs compared with IMRT for patients with endometrial cancer undergoing WPRT. It can be accurately delivered and be an alternative to IMRT on the linear accelerator without VDR capability. This work is supported by the grant project, National Natural; Science Foundation of China (No. 81071237)

  20. doi:10.1016/j.physd.2004.10.006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physica D xxx (2004) xxx-xxx A comparison of correlation and Lyapunov dimensions Konstantinos E. Chlouverakis a,∗ , J.C. Sprott b a Department of Electronic Systems Engineering, University of Essex, Wivenhoe Park, Colchester CO4 3SQ, UK b Department of Physics, University of Wisconsin, Madison, WI 53706, USA Received 14 February 2004; received in revised form 6 September 2004; accepted 22 October 2004 Communicated by R. Roy Abstract This paper investigates the relation between the correlation

  1. The original of this document contains information which is subject to withholdi

    Office of Environmental Management (EM)

    June 9, 2016 ) Case No.: PSH-16-0048 ) ____________________________________) Issued: August 29, 2016 ___________________________ Administrative Judge Decision ___________________________ William M. Schwartz, Administrative Judge: This Decision concerns the eligibility of XXX XXX XXX (hereinafter referred to as "the individual") to hold an access authorization 1 under the Department of Energy's (DOE) regulations set forth at 10 C.F.R. Part 710, Subpart A, entitled, "General

  2. Implementation of Executive Order 13514, Federal Leadership in...

    Office of Environmental Management (EM)

    More Documents & Publications Sustainable Acquisition, Federal and Department of Energy Acquisition Regulation Amendments OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in ...

  3. Teachers Invited to Activities Night at Jefferson Lab | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In addition, a number of Hampton Roads organizations will make information available regarding spring and summer programs for teachers and students. -xxx- Click here for a PDF ...

  4. Weatherization and Intergovernmental Programs Office Org Chart

    Broader source: Energy.gov (indexed) [DOE]

    Lead TPO P. Mendelson Budget Analyst P. Hayes EERE ID XXX Technical Associate E. Long Communications Lead Y. Masiky Communications A. Wein Correspondence T. Oxendine ...

  5. ARM - Data Sharing and Distribution Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... collaboration with "U.S. Department of Energy as part of the Atmospheric Radiation Measurement (ARM) Climate Research Facility XXX sites, data, specific campaign data were used." ...

  6. DE-SOL-0008445 Attachment L-4

    National Nuclear Security Administration (NNSA)

    ...... Please return the questionnaire to the DOENNSA by XXX, 2015 by any method below: Mailing Address: Fax: (505) 284-XXXX E-mail: ...

  7. Jefferson Lab and Jefferson Science Associates Bring First School...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Minister of Foreign Affairs, through the University of Santiago de Compostela. -xxx- For more information and photos, visit the first African School of Physics website at: ...

  8. OSTI, US Dept of Energy Office of Scientific and Technical Information...

    Office of Scientific and Technical Information (OSTI)

    ... May also use DOEXXXB nnn, where XXX represents approved site codes. Other Contractors and Financial Assistance Recipients DOEXXnnnnn B where letters and numbers are extracted ...

  9. 1 Advisory, Consultative, Deliberative, Draft SANDIA REPORT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... for Wind (CREW) Program Update 11 5 Data Sources The transition of the CREW Program to ... Windy GulchAll Turbine Group Potential Energy Production Turbine XXX SUSPENDED ...

  10. DOE-NEPA-Document-CertificationandTransmittalFormAugust2012.pdf

    Broader source: Energy.gov (indexed) [DOE]

    NEPA Policy and Compliance August 2012 DOE NEPA Document Certification and Transmittal Form 1. NEPA Document :(e.g., DOEEIS-XXX, DOEEA-XXXX)...

  11. Characterization and use of a 2D-array of ion chambers for brachytherapy dosimetric quality assurance

    SciTech Connect (OSTI)

    Yewondwossen, Mammo

    2012-10-01

    The two-dimensional (2D) ionization chamber array MatriXX Evolution is one of the 2D ionization chamber arrays developed by IBA Dosimetry (IBA Dosimetry, Germany) for megavoltage real-time absolute 2D dosimetry and verification of intensity-modulated radiation therapy (IMRT). The purpose of this study was to (1) evaluate the performance of ion chamber array for submegavoltage range brachytherapy beam dose verification and quality assurance (QA) and (2) use the end-to-end dosimetric evaluation that mimics a patient treatment procedure and confirm the primary source strength calibration agrees in both the treatment planning system (TPS) and treatment delivery console computers. The dose linearity and energy dependence of the 2D ion chamber array was studied using kilovoltage X-ray beams (100, 180 and 300 kVp). The detector calibration factor was determined using 300 kVp X-ray beams so that we can use the same calibration factor for dosimetric verification of high-dose-rate (HDR) brachytherapy. The phantom used for this measurement consists of multiple catheters, the IBA MatriXX detector, and water-equivalent slab of RW3 to provide full scattering conditions. The treatment planning system (TPS) (Oncentra brachy version 3.3, Nucletron BV, Veenendaal, the Netherlands) dose distribution was calculated on the computed tomography (CT) scan of this phantom. The measured and TPS calculated distributions were compared in IBA Dosimetry OmniPro-I'mRT software. The quality of agreement was quantified by the gamma ({gamma}) index (with 3% delta dose and distance criterion of 2 mm) for 9 sets of plans. Using a dedicated phantom capable of receiving 5 brachytherapy intralumenal catheters a QA procedure was developed for end-to-end dosimetric evaluation for routine QA checks. The 2D ion chamber array dose dependence was found to be linear for 100-300 kVp and the detector response (k{sub user}) showed strong energy dependence for 100-300 kVp energy range. For the Ir-192 brachytherapy

  12. Fatigue crack growth behavior of Al-Li alloy 1441

    SciTech Connect (OSTI)

    Prakash, R.V.; Parida, B.K.

    1995-12-31

    Fatigue crack growth behavior of Al-Li alloy 1441 having a marginally lower lithium content, compared to 80xx and 20xx series Al-Li alloys is presented in this paper. This investigation was conducted on single edge tension--SE(T)--specimens, under constant amplitude as well as under MiniLCA flight spectrum loading with the specific objective of determining the effects of stress ratio, orientation, thickness and cladding. Three thicknesses were considered: 1.2 mm(clad and unclad), 2.0 mm(clad and unclad) and 8.0 mm unclad. Constant amplitude fatigue tests were conducted at stress ratios of {minus}0.3, 0.1 and 0.7. Testing was performed under ambient conditions and along three orientations, namely L-T, T-L and L+45 degrees. Crack growth characteristics of this alloy are compared with that of BS:L73 (2014-T4 equivalent) for assessing the possibility of replacing BS:L73. Significant effect of stress ratio on crack growth rate was observed in all thicknesses. However, in case of 1.2 and 2.0 mm thick sheets, the effect was minimal at intermediate-crack growth regime. The orientation of the specimen does not adversely affect the fatigue crack growth behavior of 8.0 mm and 2.0 mm thick specimens. However, for 1.2 mm unclad sheet crack growth resistance in L-T direction was found to be superior to that along T-L direction. In majority of test cases considered, no significant effect was observed on crack growth rate due to thickness or cladding. Crack growth characteristics of Al-Li alloy 1441 and Al-Cu alloy BS:L73 under constant amplitude as well as MiniLCA spectrum loading are similar in the low and intermediate-crack growth rate regime. Based on these observations, it is felt that this Al-Li alloy has the potential for future aerospace applications.

  13. SU-E-T-415: An Ionization Chamber Array with High Spatial Resolution for External Beam Radiotherapy

    SciTech Connect (OSTI)

    Togno, M; Wilkens, J; Menichelli, D

    2014-06-01

    Purpose: To characterize an ionization chamber array technology with high spatial resolution and high charge collection efficiency for external beam radiotherapy. Methods: The prototype under test is a linear array of air vented ionization chambers developed by IBA Dosimetry, consisting of 80 pixels with 3.5mm spatial resolution and 4mm{sup 3} sensitive volume. The detector was characterized in a plastic phantom with {sup 60} Co radiation and MV X-rays from an ELEKTA Agility LINAC (with flattened and unflattened beam qualities). Bias voltage was varied in order to evaluate charge collection efficiency. A commercial array of ionization chambers (MatriXX Evolution, IBA Dosimetry) and an amorphous silicon flat panel in direct conversion configuration were used as references. Results: Repeatability (0.4%) and stability under continuous gamma irradiation (0.3%) are very good, in spite of low active volume and sensitivity (?200pC/Gy). Charge collection efficiency is higher than 99% already at 150V with ?2mGy dose per pulse, leading to a 1.1% sensitivity change with dose per pulse in the range 0.09-2mGy (covering all flattened and unflattened applications). Measured dose profiles are in agreement with MatriXX for fields larger than 22cm{sup 2}, in which case the linear array offers a much better characterization of the penumbra region. Down to 11cm{sup 2}, measured profiles are in very good agreement with the flat panel. Conclusion: The array represents a valuable tool for the characterization of treatment fields in which high spatial resolution is required, together with the dosimetric performance of air vented ionization chambers. Such a technology would be particularly valuable in association with advanced treatment modalities such as rotational radiotherapy, stereotactic treatments (even with unflattened beam qualities) and proton therapy, due to the insensitivity of the chambers on dose per pulse. In the future, a two dimensional prototype based on this technology

  14. D11 WASTE DISPOSAL FACILITIES FOR TRANSURANIC WASTE

    Broader source: Energy.gov (indexed) [DOE]

    ... 00902 Fmt 8010 Sfmt 8010 Y:SGML226033.XXX 226033 wreier-aviles on DSK5TPTVN1PROD with ... 8010 Y:SGML226033.XXX 226033 wreier-aviles on DSK5TPTVN1PROD with CFR 894 10 CFR Ch. ...

  15. BPA-2013-01652-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Addre P.O. Box 99249 SS RECEIVED BY BFA FOLA OFFICE TillS DATE: q14, 13 DUE DATE: 0 ux 4q -,23 f City Seattle z State WA i 98139 P Phon 206-349-4769 e Ex. xxx-xxx-xxxx FAX...

  16. Nuclear Material Transaction Report nrc741_1

    National Nuclear Security Administration (NNSA)

    XXX VVV 000001 A A 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT WASTE COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 1 VVV XXX 03 31 2008 1 LD WASTE 1 20 776 J 8.00 93.000 7.00 2041 Example 5-a 227

  17. ‘Hard’ crystalline lattice in the Weyl semimetal NbAs

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Luo, Yongkang; Ghimire, N. J.; Bauer, E. D.; Thompson, J. D.; Ronning, F.

    2016-01-14

    Here, we report the effect of hydrostatic pressure on the magnetotransport properties of the Weyl semimetal NbAs. Subtle changes can be seen in the ρxx(T) profiles with pressure up to 2.31 GPa. The Fermi surfaces undergo an anisotropic evolution under pressure: the extremal areas slightly increase in the kx-ky plane, but decrease in the kz-ky(kx) plane. The topological features of the two pockets observed at atmospheric pressure, however, remain unchanged at 2.31 GPa. No superconductivity can be seen down to 0.3 K for all the pressures measured. By fitting the temperature dependence of specific heat to the Debye model, wemore » obtain a small Sommerfeld coefficient γ0=0.09(1) mJ (mol•K2)-1 and a large Debye temperature, θD=450(9) K, confirming a 'hard' crystalline lattice that is stable under pressure. We also studied the Kadowaki–Woods ratio of this low-carrier-density massless system, RKW=3.2 x 104 μΩ cm mol2 K2 J-2. After we account for the small carrier density in NbAs, this RKW indicates a suppressed transport scattering rate relative to other metals.« less

  18. Improved removal of sticky and light contaminants from wastepaper. Final report, April 1, 1995--December 31, 1997

    SciTech Connect (OSTI)

    Seifert, P.; Kelly, A.

    1998-03-01

    Work under this two-year cooperative agreement addresses improved removal of light and sticky contaminants from waste paper. Such contaminants occur in ever-increasing amounts, resulting from glues, labels, book bindings, packaging tapes, etc., all associated with the waste paper stream. Despite various cleaning steps in the paper mill recycling systems, residual contamination remains, causing big problems with the product quality and with paper machine and converting operations. Some grades cannot be recycled at all. Stickies are truly a barrier against increased paper recycling. The stickies problem was attacked in four project segments--three of those have yielded tangible results. One segment has been outstanding in its success; namely, the development of a centrifugal reverse cleaning system consisting of primary and secondary stages, which have unparalleled high efficiency in the removal of light and sticky contaminants. This cleaning system, consists of primary XTREME and secondary XX-Clone units. Another segment of this work, washing wax contaminated old corrugated wastepaper (OCC), also has resulted in the new Xtrax process which was released for sale.

  19. Limits on Variations in Fundamental Constants from 21-cm and Ultraviolet Quasar Absorption Lines

    SciTech Connect (OSTI)

    Tzanavaris, P.; Webb, J.K.; Flambaum, V.V.; Curran, S.J.; Murphy, M.T.

    2005-07-22

    Quasar absorption spectra at 21-cm and UV rest wavelengths are used to estimate the time variation of x{identical_to}{alpha}{sup 2}g{sub p}{mu}, where {alpha} is the fine structure constant, g{sub p} the proton g factor, and m{sub e}/m{sub p}{identical_to}{mu} the electron/proton mass ratio. Over a redshift range 0.24 < or approx. z{sub abs} < or approx. 2.04, <{delta}x/x>{sub total}{sup weighted}=(1.17{+-}1.01)x10{sup -5}. A linear fit gives x/x=(-1.43{+-}1.27)x10{sup -15} yr{sup -1}. Two previous results on varying {alpha} yield the strong limits {delta}{mu}/{mu}=(2.31{+-}1.03)x10{sup -5} and {delta}{mu}/{mu}=(1.29{+-}1.01)x10{sup -5}. Our sample, 8x larger than any previous, provides the first direct estimate of the intrinsic 21-cm and UV velocity differences {approx}6 km s{sup -1}.

  20. Electronic structure of antifluorite Cu{sub 2}X (X = S, Se, Te) within the modified Becke-Johnson potential plus an on-site Coulomb U

    SciTech Connect (OSTI)

    Zhang, Yubo; Wang, Youwei; Xi, Lili; Qiu, Ruihao; Shi, Xun; Zhang, Peihong E-mail: pzhang3@buffalo.edu; Beijing Computational Science Research Center, Beijing 100084 ; Zhang, Wenqing E-mail: pzhang3@buffalo.edu; School of Chemistry and Chemical Engineering, and Sate Key Laboratory of Coordination Chemistry, Nanjing University, Jiangsu 210093

    2014-02-21

    The traditional photon absorbers Cu{sub 2?x}X (X = S, Se, and Te) have regained significant research attention in the search of earth-abundant photovoltaic materials. These moderate- and narrow-gap materials have also been shown to exhibit excellent thermoelectric properties recently. However, semimetallic band structures with inverted band orderings are predicted for antifluorite structure Cu{sub 2}X using density functional theory with the local density approximation or the generalized gradient approximation. We find that semiconducting band structures and normal band orderings can be obtained using the modified Becke-Johnson potential plus an on-site Coulomb U (the mBJ+U approach), which is consistent with our earlier finding for diamond-like Cu-based multinary semiconductors [Y. Zhang, J. Zhang, W. Gao, T. A. Abtew, Y. Wang, P. Zhang, and W. Zhang, J. Chem. Phys. 139, 184706 (2013)]. The trend of the chemical bonding of Cu{sub 2}X is analyzed, which shows that the positions of the valence band maximum and conduction band minimum are strongly affected by the inter-site pd and intra-site sp hybridizations, respectively. The calculated gaps of Cu{sub 2}S and Cu{sub 2}Se still seem to be underestimated compared with experimental results. We also discuss the effects of different structural phases and Cu disordering and deficiency on the bandgaps of these materials.

  1. Solid state proton and electron mediating membrane and use in catalytic membrane reactors

    DOE Patents [OSTI]

    White, James H.; Schwartz, Michael; Sammells, Anthony F.

    1998-01-01

    This invention provides catalytic proton and electron mediating membranes useful in catalytic reactors. The membranes have an oxidation and a reduction surface and comprise a single-phase mixed metal oxide material of the formula: AB.sub.1-x B'.sub.x O.sub.3-y wherein A is selected from Ca, Sr or Ba ions; B is selected from Ce, Tb, Pr, or Th ions; B' is selected from Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Al, Ga, or In ions, or combinations thereof; and x is greater than or equal to 0.02 and less than or equal to 0.5. The membranes can further comprise a catalyst on either the oxidation or reduction surface, or both. Membranes include those which are fabricated-by combining powders of metal oxides or metal carbonates of metal A ion, metal B ion and metal B' ion such that the stoichiometric ratio A:B:B' is 1:1-x:x where 0.2.ltoreq..times.0.5, repeatedly calcining and milling the combined powders until a single-phase material is obtained and pressing and sintering the singlephase material to obtain a membrane.

  2. Printability and inspectability of programmed pit defects on teh masks in EUV lithography

    SciTech Connect (OSTI)

    Kang, I.-Y.; Seo, H.-S.; Ahn, B.-S.; Lee, D.-G.; Kim, D.; Huh, S.; Koh, C.-W.; Cha, B.; Kim, S.-S.; Cho, H.-K.; Mochi, I.; Goldberg, K. A.

    2010-03-12

    Printability and inspectability of phase defects in ELlVL mask originated from substrate pit were investigated. For this purpose, PDMs with programmed pits on substrate were fabricated using different ML sources from several suppliers. Simulations with 32-nm HP L/S show that substrate pits with below {approx}20 nm in depth would not be printed on the wafer if they could be smoothed by ML process down to {approx}1 nm in depth on ML surface. Through the investigation of inspectability for programmed pits, minimum pit sizes detected by KLA6xx, AIT, and M7360 depend on ML smoothing performance. Furthermore, printability results for pit defects also correlate with smoothed pit sizes. AIT results for pattemed mask with 32-nm HP L/S represents that minimum printable size of pits could be {approx}28.3 nm of SEVD. In addition, printability of pits became more printable as defocus moves to (-) directions. Consequently, printability of phase defects strongly depends on their locations with respect to those of absorber patterns. This indicates that defect compensation by pattern shift could be a key technique to realize zero printable phase defects in EUVL masks.

  3. Generating unstructured nuclear reactor core meshes in parallel

    SciTech Connect (OSTI)

    Jain, Rajeev; Tautges, Timothy J.

    2014-10-24

    Recent advances in supercomputers and parallel solver techniques have enabled users to run large simulations problems using millions of processors. Techniques for multiphysics nuclear reactor core simulations are under active development in several countries. Most of these techniques require large unstructured meshes that can be hard to generate in a standalone desktop computers because of high memory requirements, limited processing power, and other complexities. We have previously reported on a hierarchical lattice-based approach for generating reactor core meshes. Here, we describe efforts to exploit coarse-grained parallelism during reactor assembly and reactor core mesh generation processes. We highlight several reactor core examples including a very high temperature reactor, a full-core model of the Korean MONJU reactor, a ¼ pressurized water reactor core, the fast reactor Experimental Breeder Reactor-II core with a XX09 assembly, and an advanced breeder test reactor core. The times required to generate large mesh models, along with speedups obtained from running these problems in parallel, are reported. A graphical user interface to the tools described here has also been developed.

  4. Materials and methods for the separation of oxygen from air

    DOE Patents [OSTI]

    MacKay, Richard; Schwartz, Michael; Sammells, Anthony F.

    2003-07-15

    Metal oxides particularly useful for the manufacture of catalytic membranes for gas-phase oxygen separation processes having the formula: O.sub.5+z where: x and x' are greater than 0; y and y' are greater than 0; x+x' is equal to 2; y+y' is less than or equal to 2; z is a number that makes the metal oxide charge neutral; A is an element selected from the lanthanide elements; A' is an element selected from Be, Mg, Ca, Sr, Ba and Ra; A" is an element selected from the f block lanthanides, Be, Mg, Ca, Sr, Ba and Ra; B is an element selected from the group consisting of Al, Ga, In or mixtures thereof and B" is Co or Mg, with the exception that when B" is Mg, A' and A" are not Mg. The metal oxides are useful for preparation of dense membranes which may be formed from dense thin films of the mixed metal oxide on a porous metal oxide element. The invention also provides methods and catalytic reactors for oxygen separation and oxygen enrichment of oxygen deficient gases which employ mixed conducting metal oxides of the above formula.

  5. Overview of the US Department of Energy Master Safeguards and Security Agreement program

    SciTech Connect (OSTI)

    Billings, M.P.; Duncan, M.R.; Craig, J.R.

    1988-06-01

    The Master Safeguards and Security Agreement establishes a contract between the US Department of Energy-Headquarters and a US Department of Energy regional Operations Office regarding protection strategies, protection system performance, and acceptability of risks for US Department of Energy Safeguards and Security interests at a facility or site. An approved Master Safeguards and Security Agreement defines the protection system performance baseline for evaluations, inspections, and audits, and can introduce exceptions to US Department of Energy orders. Responsibilities and authorities for development and approval of a Master Safeguards and Security Agreement are outlined in US Department of Energy Order 5630.13, ''Master Safeguards and Security Agreement'' and US Department of Energy Order 5630.xx, ''Safeguards and Security Planning Program'' (draft). To date, 14 Master Safeguards and Security Agreements have been approved by the US Department of Energy-Headquarters and about 34 are in preparation or review. A total of approximately 50 are anticipated before completion of the program. The Master Safeguards and Security agreement program has been positively received by both the US Department of Energy-Headquarters and the US Department of Energy Operations Offices, because it provides visibility as to the effectiveness of Safeguards and Security protection systems and affords a sensible foundation for security planning based on risk. 6 refs., 3 figs., 6 tabs.

  6. Generating unstructured nuclear reactor core meshes in parallel

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jain, Rajeev; Tautges, Timothy J.

    2014-10-24

    Recent advances in supercomputers and parallel solver techniques have enabled users to run large simulations problems using millions of processors. Techniques for multiphysics nuclear reactor core simulations are under active development in several countries. Most of these techniques require large unstructured meshes that can be hard to generate in a standalone desktop computers because of high memory requirements, limited processing power, and other complexities. We have previously reported on a hierarchical lattice-based approach for generating reactor core meshes. Here, we describe efforts to exploit coarse-grained parallelism during reactor assembly and reactor core mesh generation processes. We highlight several reactor coremore » examples including a very high temperature reactor, a full-core model of the Korean MONJU reactor, a ¼ pressurized water reactor core, the fast reactor Experimental Breeder Reactor-II core with a XX09 assembly, and an advanced breeder test reactor core. The times required to generate large mesh models, along with speedups obtained from running these problems in parallel, are reported. A graphical user interface to the tools described here has also been developed.« less

  7. Mixed Waste Integrated Program Quality Assurance requirements plan

    SciTech Connect (OSTI)

    Not Available

    1994-04-15

    Mixed Waste Integrated Program (MWIP) is sponsored by the US Department of Energy (DOE), Office of Technology Development, Waste Management Division. The strategic objectives of MWIP are defined in the Mixed Waste Integrated Program Strategic Plan, and expanded upon in the MWIP Program Management Plan. This MWIP Quality Assurance Requirement Plan (QARP) applies to mixed waste treatment technologies involving both hazardous and radioactive constituents. As a DOE organization, MWIP is required to develop, implement, and maintain a written Quality Assurance Program in accordance with DOE Order 4700.1 Project Management System, DOE Order 5700.6C, Quality Assurance, DOE Order 5820.2A Radioactive Waste Management, ASME NQA-1 Quality Assurance Program Requirements for Nuclear Facilities and ANSI/ASQC E4-19xx Specifications and Guidelines for Quality Systems for Environmental Data Collection and Environmental Technology Programs. The purpose of the MWIP QA program is to establish controls which address the requirements in 5700.6C, with the intent to minimize risks and potential environmental impacts; and to maximize environmental protection, health, safety, reliability, and performance in all program activities. QA program controls are established to assure that each participating organization conducts its activities in a manner consistent with risks posed by those activities.

  8. A study of nitrogenation of a NdFe{sub 12-x}Mo{sub x} compound by in situ neutron powder diffraction.

    SciTech Connect (OSTI)

    Ding, Y.; Lin, J.; Loong, C.-K.; Short, S. M.

    1997-11-18

    The effects on the crystal lattice of a NdFe{sub 12{minus}x}Mo{sub x}(x {approx_equal} 1.7) compound which contained {approximately}12 vol% of bcc-Fe were studied by neutron powder diffraction during controlled nitrogenation over the 25-600 C temperature range. The sample inside the furnace was connected to a closed volume of ultra-pure nitrogen gas while neutron data were collected over regular time intervals during sequential heating. Substantial nitrogen absorption occurred between 500 to 600 C. During the nitrogenation process the NdFe{sub 12{minus}x}Mo{sub x}N{sub y} lattice expanded while the bcc-Fe lattice contracted. An increasing decomposition of the compound into bcc-Fe at 600 C was observed. The average size of the NdFe{sub 12{minus}x}Mo{sub x}N{sub y} crystalline grains decreased starting at {approximately}300 C, reaching a minimum at {approximately}500 C and then increased markedly at higher temperatures. The development of lattice strains, on the other hand, showed an opposite trend, i.e., a maximum at 500 C. A correlation of structural modification of the crystalline phases and the nitrogenation process is discussed.

  9. Combustion performance of porous silicon-based energetic composites

    SciTech Connect (OSTI)

    Mason, Benjamin Aaron; Son, Steve F; Asay, Blaine W; Cho, Kevin Y

    2009-01-01

    The combustion performance of oxidizer filled porous silicon(PSi) was studied. PSi samples with diameters of 2.54 cm were fabricated by electrochemical etching. The % porosity of the samples ranged from 55 to 82%. The samples were cut into 3-5 mm strips and filled with the oxidizers NaClO{sub 4} x 1H{sub 2}O, Ca(ClO{sub 4}){sub 2} x 4H{sub 2}O, S and perfluoropolyether (PFPE). The filled PSi was then burned by igniting the sample with a hot NiChrome{trademark} wire. The burns were recorded using high speed photography from which bring rates were calculated. That burning rates showed a strong dependency on quality of the oxidizer loading. The % porosity did not appear to have a direct affect on the burning rates for those studied. PSi loaded with NaClO{sub 4} x 1H{sub 2}O produced burning rates that ranged from 216-349 cm/s. PSi loaded with Ca(ClO{sub 4}){sub x}x 4 H{sub 2}O had burning rates of 154-285 cm/s. An S filled PSi sample burned a rate of 16 to 290 cm/s, and perfluoropolyether loaded PSi burned at a rate of 1.4 cm/s.

  10. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * The email message may be poorly written, with misspellings and awkward sentence structure. * The sender's email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com. Email from either site may also be in this form: xxx@cns.doe.gov. * The message and purchase order requests shipment/delivery of products to non-CNS facilities. * The message will include an attachment that is designed to look like a purchase

  11. 70007 X PLANE MODULE ASSY 127 -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AUTHORIZATION BY THIS UNIVERSITY IS PROHIBITED. .0005 .013 1 xxxx x 132 x.xxxx x.xxx SHEET DRAWN APPROVED CHECKED SCALE THIRD ANGLE PROJECTION D SIZE DWG NO OF...

  12. PMT BOX TUFTS - Sheet1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AUTHORIZATION BY THIS UNIVERSITY IS PROHIBITED. .0005 .013 1 xxxx x 132 x.xxxx x.xxx SHEET DRAWN APPROVED CHECKED SCALE THIRD ANGLE PROJECTION D SIZE DWG NO OF...

  13. MAPPER - Sheet1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AUTHORIZATION BY THIS UNIVERSITY IS PROHIBITED. .0005 .013 1 xxxx x 132 x.xxxx x.xxx SHEET DRAWN APPROVED CHECKED SCALE THIRD ANGLE PROJECTION D SIZE DWG NO OF...

  14. BPA-2016-00034-FOIA Request

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Privacy Act must be signed and, therefore, cannot be submitted on this form. Name Marina Brassfield Email (b)(6) Organization Mailing Address City State Phone FAX Ex. XXX*...

  15. The original of this document contains information which is subject...

    Office of Environmental Management (EM)

    ... Application at 28. Avocent contends that it received samples of the XXX XXXX EPSs in December 2015. Application at 28. At that time, XXXXXX informed Avocent that the design changes ...

  16. Overview of Station Analysis Tools Developed in Support of H2USA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Cost Model Output Sizing of Refueling Components Station Capacity Fueling Cost kg H2 xxx kg H2 day % yr Available at: http:www.hydrogen.energy.govh2adelivery.html 10 y ...

  17. Microsoft Word - MP 10 3 Rev 7

    Office of Environmental Management (EM)

    ... Laboratories Department Interface Document R0 R0 26 - Revised to address U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) Corrective Action Report (CAR) 08-XXX.

  18. Energetic Materials for EGS Well Stimulation (solids, liquids...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Nuclear Security Administration under contract DE-AC04-94AL85000. SANDXXXX-XXX 2 | US DOE Geothermal Office eere.energy.gov RelevanceImpact of Research - 1 * ...

  19. Aerosol Observing System Greenhouse Gas (AOS GHG) Handbook

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Switch the pump back ON, and reattach the tubing. 12.6.1.2 Pump Failure In normal operation a pump's rocker switch should be illuminated, and there should be flow (XXX) and ...

  20. ES&H Manual Welding and Brazing Supplement ISSUING AUTHORITY...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Code-Aluminum AWS D1.6, Structural Welding Code-Stainless Steel AWS B2.1-X-XXX, Standard Welding Procedure Specifications AWS D1.3, Structural Welding Code-Sheet ...

  1. November 28, 2

    Office of Environmental Management (EM)

    definition incorporated has not yet been published, but the 15-day Express Terms were adopted at the CEC's xxx business meeting and are considered a finished product, as it were. ...

  2. Good practice guide on firewall deployment for SCADA and process...

    Broader source: Energy.gov (indexed) [DOE]

    ... More specifically, if the PCN is assigned the private subnet 192.168.1.xxx and the Internet network expects the device to use the corporate assigned addresses in the range ...

  3. U

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BY ORDER OF THE SECRETARY OF ENERGY: NAME Deputy Secretary AVAILABLE ONLINE AT: INITIATED BY: www.directives.doe.gov Office of Primary Interest DRAFT DOE P XXX.X Logo inserted here ...

  4. First Draft Performance Assessment for the H-Area Tank Farm at...

    Office of Environmental Management (EM)

    ... H-Area Tank Farm at the Revision 0 Savannah River Site March 2011 Page xxx of 864 Figure 5.6-83: CZ (No Liner) Hydraulic Degradation - Type II Tank ...

  5. National Nuclear Security Administration/Nevada Field Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... programs. NSTec also works on projects for other federal agencies, as it fulfills its national security missions. RSL Aviation Chief of Maintenance Dave Krausnick NR-16-0010 XXX

  6. Critical Issues in NPH Categorization and Limit State Selection...

    Office of Environmental Management (EM)

    ... level that it adversely affects the safety function of SSC YY. And that may require SSC XXX to be designed to even Limit State D. It is noteworthy because, from the old concept of ...

  7. -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - our vision is that one day they may become our employees." Scholarship recipients are given an opportunity to intern at NSTec after their first year of college. NR-15-0013 XXX

  8. Folie 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... shielded by fission or decay Production cross sections for 16,20,22 O + 238 U -> xxx Fm HIVAP calculation, Devraja 2014 16 O + Nishio data 20 O 22 O 1mb Weak dependence of ...

  9. DOE Directives, Delegations, and Requirements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Employee Concerns Program Jun 17, 2016 Notice of Intent to Develop DOE P XXX.X, Contractor Assurance Systems Policy May 20, 2016 New - DOE N 251.115, Cancellation of ...

  10. Open Issues

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    non-login) messes up the path, causing qsub or ftn command either not found or uses wrong path. Unloadind and loading the PrgEnv-xxx module again may partially address the problem

  11. BPA - Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is an example of the information collected based on a standard request for a World Wide Web document: xxx.yyy.com - - 28Jan1997:00:00:01 -0500 "GET sitenamenews...

  12. Goodman Manufacturing: Noncompliance Determination (2011-SE-4301)

    Broader source: Energy.gov [DOE]

    DOE issued a Notice of Noncompliance Determination to Goodman Manufacturing finding that model CPC180XXX3BXXXAA (CPC180*) of commercial package air conditioner does not comport with the energy conservation standards.

  13. Preparation Guide for U. S. Department of Energy Nonreator Nuclear...

    Office of Environmental Management (EM)

    SENSITIVE DOE-STD-3009-94 July 1994 CHANGE NOTICE NO. 1 January 2000 CHANGE NOTICE NO. 2 ... xxx NEPA National Environmental Policy Act NFPA National Fire Protection Association NNSA ...

  14. Nuclear Material Transaction Report NRC 741_1

    National Nuclear Security Administration (NNSA)

    B 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 0 YYY XXX 04 01 2008 BASED ON SHIPPER'S VALUES Example 1-b

  15. High Temperature, Low Relative Humidity, Polymer-type Membranes Based on Disulfonated Poly(arylene ether) Block and Random Copolymers Optionally Incorporating Protonic Conducting Layered Water insoluble Zirconium Fillers

    SciTech Connect (OSTI)

    McGrath, James E.; Baird, Donald G.

    2010-06-03

    Our research group has been engaged in the past few years in the synthesis of biphenol based partially disulfonated poly(arylene ether sulfone) random copolymers as potential PEMs. This series of polymers are named as BPSH-xx, where BP stands for biphenol, S stands for sulfonated, H stands for acidified and xx represents the degree of disulfonation. All of these sulfonated copolymers phase separate to form nano scale hydrophilic and hydrophobic morphological domains. The hydrophilic phase containing the sulfonic acid moieties causes the copolymer to absorb water. Water confined in hydrophilic pores in concert with the sulfonic acid groups serve the critical function of proton (ion) conduction and water transport in these systems. Both Nafion and BPSH show high proton conductivity at fully hydrated conditions. However proton transport is especially limited at low hydration level for the BPSH random copolymer. It has been observed that the diffusion coefficients of both water and protons change with the water content of the pore. This change in proton and water transport mechanisms with hydration level has been attributed to the solvation of the acid groups and the amount of bound and bulk-like water within a pore. At low hydration levels most of the water is tightly associated with sulfonic groups and has a low diffusion coefficient. This tends to encourage isolated domain morphology. Thus, although there may be significant concentrations of protons, the transport is limited by the discontinuous morphological structure. Hence the challenge lies in how to modify the chemistry of the polymers to obtain significant protonic conductivity at low hydration levels. This may be possible if one can alter the chemical structure to synthesize nanophase separated ion containing block copolymers. Unlike the BPSH copolymers, where the sulfonic acid groups are randomly distributed along the chain, the multiblock copolymers will feature an ordered sequence of hydrophilic and

  16. SU-E-T-350: Verification of Gating Performance of a New Elekta Gating Solution: Response Kit and Catalyst System

    SciTech Connect (OSTI)

    Xie, X; Cao, D; Housley, D; Mehta, V; Shepard, D

    2014-06-01

    Purpose: In this work, we have tested the performance of new respiratory gating solutions for Elekta linacs. These solutions include the Response gating and the C-RAD Catalyst surface mapping system.Verification measurements have been performed for a series of clinical cases. We also examined the beam on latency of the system and its impact on delivery efficiency. Methods: To verify the benefits of tighter gating windows, a Quasar Respiratory Motion Platform was used. Its vertical-motion plate acted as a respiration surrogate and was tracked by the Catalyst system to generate gating signals. A MatriXX ion-chamber array was mounted on its longitudinal-moving platform. Clinical plans are delivered to a stationary and moving Matrix array at 100%, 50% and 30% gating windows and gamma scores were calculated comparing moving delivery results to the stationary result. It is important to note that as one moves to tighter gating windows, the delivery efficiency will be impacted by the linac's beam-on latency. Using a specialized software package, we generated beam-on signals of lengths of 1000ms, 600ms, 450ms, 400ms, 350ms and 300ms. As the gating windows get tighter, one can expect to reach a point where the dose rate will fall to nearly zero, indicating that the gating window is close to beam-on latency. A clinically useful gating window needs to be significantly longer than the latency for the linac. Results: As expected, the use of tighter gating windows improved delivery accuracy. However, a lower limit of the gating window, largely defined by linac beam-on latency, exists at around 300ms. Conclusion: The Response gating kit, combined with the C-RAD Catalyst, provides an effective solution for respiratorygated treatment delivery. Careful patient selection, gating window design, even visual/audio coaching may be necessary to ensure both delivery quality and efficiency. This research project is funded by Elekta.

  17. The role of FISH in prenatal diagnosis

    SciTech Connect (OSTI)

    Kulch, P.; Crandall, B.F.; Hsi, C.

    1994-09-01

    FISH provides a cytogenetic technique which is useful in defining de novo translocations, deletions, insertions, and marker chromosomes in prenatal diagnosis. While the cytogenetic interpretation may be improved with FISH, it may not resolve questions concerning prognosis and options which are genetic counseling issues. Two recent cases illustrate this. Case 1 involved a 45,X/46,X,+mar karyotype from amniocentesis. 22/50 cells had 46,X/46,X+mar; 28/50 cells had 45,X. The marker was smaller than a G. C banding did not confirm this as a Y. The father`s peripheral blood study was normal and his Y did not resemble the marker. It appeared likely that the marker was a structurally abnormal Y since male external genitalia were detected by fetal ultrasound. FISH using alpha- and classical (DYZ1/DYZ3) satellite Y-specific probes did not identify the marker as a Y. Case 2 was a fetus which had a de novo translocation 46,XX,t(3;11)(q26.3;q21) by amniocentesis and confirmed by UBS. FISH for the number 3 and 11 chromosomes confirmed this rearrangement. The parents were advised of the risk associated with a de novo balanced translocation. The possible prognosis for these two different fetuses was not changed by the FISH analysis. FISH, while helpful, is only one aspect of the studies done to provide more accurate genetic counseling to parents; the pregnancy/family history, fetal ultrasound, other possible prenatal studies and pregnancy outcome from perspective studies compose other important aspects that are not mutually exclusive.

  18. Conjunction of Multizone Infiltration Specialists (COMIS) fundamentals

    SciTech Connect (OSTI)

    Feustel, H.E.; Rayner-Hooson, A.

    1990-05-01

    The COMIS workshop (Conjunction of Multizone Infiltration Specialists) was a joint research effort to develop a multizone infiltration mode. This workshop (October 1988--September 1989) was hosted by the Energy Performance of Buildings Group at Lawrence Berkeley Laboratory's Applied Science Division. The task of the workshop was to develop a detailed multizone infiltration program taking crack flow, HVAC-systems, single-sided ventilation and transport mechanism through large openings into account. This work was accomplished not by investigating into numerical description of physical phenomena but by reviewing the literature for the best suitable algorithm. The numerical description of physical phenomena is clearly a task of IEA-Annex XX Air Flow Patterns in Buildings,'' which will be finished in September 1991. Multigas tracer measurements and wind tunnel data will be used to check the model. The agenda integrated all participants' contributions into a single model containing a large library of modules. The user-friendly program is aimed at researchers and building professionals. From its announcement in December 1986, COMIS was well received by the research community. Due to the internationality of the group, several national and international research programmes were co-ordinated with the COMIS workshop. Colleagues for France, Italy, Japan, The Netherlands, People's Republic of China, Spain, Sweden, Switzerland, and the United States of America were working together on the development of the model. Even though this kind of co-operation is well known in other fields of research, e.g., high energy physics; for the field of building physics it is a new approach. This document contains an overview about infiltration modelling as well as the physics and the mathematics behind the COMIS model. 91 refs., 38 figs., 9 tabs.

  19. SU-E-T-219: Investigation of IMRT Out-Of-Field Dose Calculation Accuracy for a Commercial Treatment Planning System

    SciTech Connect (OSTI)

    2014-06-01

    Purpose: Inaccuracies in out-of-field calculations could lead to underestimation of dose to organs-at-risk. This study evaluates the dose calculation accuracy of a model-based calculation algorithm at points outside the primary treatment field for an intensity modulated radiation therapy (IMRT) plan using experimental measurements. Methods: The treatment planning system investigated is Varian Eclipse V.10 with Analytical Anisotropic Algorithm (AAA). The IMRT fields investigated are from real patient treatment plans. The doses from a dynamic (DMLC) IMRT brain plan were calculated and compared with measured doses at locations outside the primary treatment fields. Measurements were performed with a MatriXX system (2-D chamber array) placed in solid water. All fields were set vertically incident on the phantom and were 9 cm 6 cm or smaller. The dose was normalized to the central axis for points up to 15 cm off isocenter. The comparisons were performed at depths of 2, 10, 15, and 20 cm Results: The measurements have shown that AAA calculations underestimate doses at points outside the primary treatment field. The underestimation occurs at 2 cm depth and decreases down to a factor of 2 as depth increases to 20 cm. In low dose (<2% of target dose) regions outside the primary fields the local dose underestimations can be >200% compared to measured doses. Relative to the plan target dose, the measured doses to points outside the field were less than 1% at shallow depths and less than 2% at greater depths. Conclusion: Compared to measurements, the AAA algorithm underestimated the dose at points outside the treatment field with the greatest differences observed at shallow depths. Despite large local dose uncertainties predicted by the treatment planning system, the impact of these uncertainties is expected to be insignificant as doses at these points were less than 1-2% of the prescribed treatment dose.

  20. Prediction and Monitoring Systems of Creep-Fracture Behavior of 9Cr-1Mo Steels for Teactor Pressure Vessels

    SciTech Connect (OSTI)

    Potirniche, Gabriel; Barlow, Fred D.; Charit, Indrajit; Rink, Karl

    2013-11-26

    A recent workshop on next-generation nuclear plant (NGNP) topics underscored the need for research studies on the creep fracture behavior of two materials under consideration for reactor pressure vessel (RPV) applications: 9Cr-1Mo and SA-5XX steels. This research project will provide a fundamental understanding of creep fracture behavior of modified 9Cr-1Mo steel welds for through modeling and experimentation and will recommend a design for an RPV structural health monitoring system. Following are the specific objectives of this research project: Characterize metallurgical degradation in welded modified 9Cr-1Mo steel resulting from aging processes and creep service conditions; Perform creep tests and characterize the mechanisms of creep fracture process; Quantify how the microstructure degradation controls the creep strength of welded steel specimens; Perform finite element (FE) simulations using polycrystal plasticity to understand how grain texture affects the creep fracture properties of welds; Develop a microstructure-based creep fracture model to estimate RPVs service life; Manufacture small, prototypic, cylindrical pressure vessels, subject them to degradation by aging, and measure their leak rates; Simulate damage evolution in creep specimens by FE analyses; Develop a model that correlates gas leak rates from welded pressure vessels with the amount of microstructural damage; Perform large-scale FE simulations with a realistic microstructure to evaluate RPV performance at elevated temperatures and creep strength; Develop a fracture model for the structural integrity of RPVs subjected to creep loads; and Develop a plan for a non-destructive structural health monitoring technique and damage detection device for RPVs.

  1. Comparison of Elekta VMAT with helical tomotherapy and fixed field IMRT: Plan quality, delivery efficiency and accuracy

    SciTech Connect (OSTI)

    Rao Min; Yang Wensha; Chen Fan; Sheng Ke; Ye Jinsong; Mehta, Vivek; Shepard, David; Cao Daliang

    2010-03-15

    Purpose: Helical tomotherapy (HT) and volumetric modulated arc therapy (VMAT) are arc-based approaches to IMRT delivery. The objective of this study is to compare VMAT to both HT and fixed field IMRT in terms of plan quality, delivery efficiency, and accuracy. Methods: Eighteen cases including six prostate, six head-and-neck, and six lung cases were selected for this study. IMRT plans were developed using direct machine parameter optimization in the Pinnacle{sup 3} treatment planning system. HT plans were developed using a Hi-Art II planning station. VMAT plans were generated using both the Pinnacle{sup 3} SmartArc IMRT module and a home-grown arc sequencing algorithm. VMAT and HT plans were delivered using Elekta's PreciseBeam VMAT linac control system (Elekta AB, Stockholm, Sweden) and a TomoTherapy Hi-Art II system (TomoTherapy Inc., Madison, WI), respectively. Treatment plan quality assurance (QA) for VMAT was performed using the IBA MatriXX system while an ion chamber and films were used for HT plan QA. Results: The results demonstrate that both VMAT and HT are capable of providing more uniform target doses and improved normal tissue sparing as compared with fixed field IMRT. In terms of delivery efficiency, VMAT plan deliveries on average took 2.2 min for prostate and lung cases and 4.6 min for head-and-neck cases. These values increased to 4.7 and 7.0 min for HT plans. Conclusions: Both VMAT and HT plans can be delivered accurately based on their own QA standards. Overall, VMAT was able to provide approximately a 40% reduction in treatment time while maintaining comparable plan quality to that of HT.

  2. SU-E-J-91: Novel Epitaxial Silicon Array for Quality Assurance in Photon and Proton Therapy

    SciTech Connect (OSTI)

    Talamonti, C; Zani, M; Scaringella, M; Bruzzi, M; Bucciolini, M; Menichelli, D; Friedl, F

    2014-06-01

    Purpose: to demonstrate suitability of a novel silicon array for measuring the dose properties of highly conformal photon and proton beams. Methods: prototype under test is a 24cm long linear array prototype, although the underlying technology is suitable to construct 2D arrays as well. It is based on a 64pixels monolithic sensor with 1mm pixel pitch, made of epitaxial ptype silicon. Thanks to design modularity, more sensors can be placed side by side without breaking pixel pitch. Flattened and unflattened photon beams, as well as proton radiation from a cyclotron in pencil beam scanning mode, were considered. Measurements of beam characteristics as percentage depth doses, dose profiles, output factors and energy response, which are necessary to deliver radiation with high precision and reliability, were performed. Results: Dose rate independence with photons was verified in the dose per pulse range 0.03 to 2mGy. Results clearly indicate nondependence of the detector sensitivity both for flattened and unflattened beams, with a variation of at most 0.5percentage. OFs were obtained for field with a lateral size ranging from 0.8cm to 16cm and the results are in good agreement with ion chamber A1SL, max difference less than 1.5percentage. Field sizes and beam penumbra were measured and compared to EBT film results. Concerning proton beams, sensitivity independence on dose rate was verified by changing the beam current in the interval 2-130Gy/s. Field sizes and beam penumbra measurements are in agreement with data taken with a scintillating 2D array with 0.5mm resolution IBA Lynx, and a better penumbra definition than an array of ionization chambers IBA MatriXX is reached. Conclusion: The device is a novel and valuable tool for QA both for photon and proton dose delivery. All measurements demonstrated its capability to measure with high spatial resolution many crucial properties of the RT beam.

  3. SciFri PM: Dosimetry06: Commissioning of a 3D patient specific QA system for hypofractionated prostate treatments

    SciTech Connect (OSTI)

    Rivest, R; Venkataraman, S; McCurdy, B

    2014-08-15

    The objective of this work is to commission the 6MV-SRS beam model in COMPASS (v2.1, IBA-Dosimetry) and validate its use for patient specific QA of hypofractionated prostate treatments. The COMPASS system consists of a 2D ion chamber array (MatriXX{sup Evolution}), an independent gantry angle sensor and associated software. The system can either directly calculate or reconstruct (using measured detector responses) a 3D dose distribution on the patient CT dataset for plan verification. Beam models are developed and commissioned in the same manner as a beam model is commissioned in a standard treatment planning system. Model validation was initially performed by comparing both COMPASS calculations and reconstructions to measured open field beam data. Next, 10 hypofractionated prostate RapidArc plans were delivered to both the COMPASS system and a phantom with ion chamber and film inserted. COMPASS dose distributions calculated and reconstructed on the phantom CT dataset were compared to the chamber and film measurements. The mean ( standard deviation) difference between COMPASS reconstructed dose and ion chamber measurement was 1.4 1.0%. The maximum discrepancy was 2.6%. Corresponding values for COMPASS calculation were 0.9 0.9% and 2.6%, respectively. The average gamma agreement index (3%/3mm) for COMPAS reconstruction and film was 96.7% and 95.3% when using 70% and 20% dose thresholds, respectively. The corresponding values for COMPASS calculation were 97.1% and 97.1%, respectively. Based on our results, COMPASS can be used for the patient specific QA of hypofractionated prostate treatments delivered with the 6MV-SRS beam.

  4. NOTICE TO SUPPLIERS Fraudulent Quote Requests/Purchase Order E-Mail Activity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

     The email message may be poorly written, with misspellings and awkward sentence structure.  The senders email address is not the same as CNS standard email address domain. The email address domain for Y-12: xxx@y12.doe.gov, for Pantex: xxx@pantex.com.  The message and purchase order requests shipment/delivery of products to non-CNS facilities.  The message will include an attachment that is designed to look like a purchase order, and includes a logo or other graphic, and a signature

  5. Thermal entanglement of spins in mean-field clusters

    SciTech Connect (OSTI)

    Asoudeh, M.; Karimipour, V.

    2006-06-15

    We determine thermal entanglement in mean-field clusters of N spin one-half particles interacting via the anisotropic Heisenberg interaction, with and without external magnetic field. For the xxx cluster in the absence of magnetic field we prove that only the N=2 ferromagnetic cluster shows entanglement. An external magnetic field B can only entangle xxx antiferromagnetic clusters in certain regions of the B-T plane. On the other hand, the xxz clusters of size N>2 are entangled only when the interaction is ferromagnetic. Detailed dependence of the entanglement on various parameters is investigated in each case.

  6. PerformanceToolsHarvey2012.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    USING C RAY'S A PPRENTICE T OOL Harvey Wasserman 1 Using Apprentice * Optional visualization tool for Cray perf data * Use it in a X Windows environment * Uses a data file as input (XXX.ap2) that is prepared by pat_report! 1. module load perftools! 2. ftn -c mpptest.f! 3. ftn -o mpptest mpptest.o! 4. pat_build -u -g mpi mpptest! 5. aprun -n 16 mpptest+pat! 6. pat_report mpptest+pat +PID.xf > my_report! 7. app2 [--limit_per_pe tags] [XXX.ap2]! 2 Opening Files * Identify files on the command

  7. Chandra spectroscopy of MAXI J1305704: Detection of an infalling black hole disk wind?

    SciTech Connect (OSTI)

    Miller, J. M.; Maitra, D.; Reynolds, M. T.; Degenaar, N.; King, A. L.; Raymond, J.; Kallman, T. R.; Fabian, A. C.; Proga, D.; Reynolds, C. S.; Cackett, E. M.; Kennea, J. A.; Beardmore, A.

    2014-06-10

    We report on a high-resolution Chandra/HETG X-ray spectrum of the transient X-ray binary MAXI J1305704. A rich absorption complex is detected in the Fe L band, including density-sensitive lines from Fe XX, Fe XXI, and Fe XXII. Spectral analysis over three wavelength bands with a large grid of XSTAR photoionization models generally requires a gas density of n ? 10{sup 17} cm{sup 3}. Assuming a luminosity of L = 10{sup 37} erg s{sup 1}, fits to the 10-14 band constrain the absorbing gas to lie within r = (3.9 0.7) 10{sup 3} km from the central engine, or about r = 520 90 (M/5 M {sub ?}) r{sub g} , where r{sub g} = GM/c {sup 2}. At this small distance from the compact object, gas in stable orbits should have a gravitational redshift of z = v/c ? (3 1) 10{sup 3} (M/5 M {sub ?}), and any tenuous inflowing gas should have a free-fall velocity of v/c ? (6 1) 10{sup 2} (M/5 M {sub ?}){sup 1/2}. The best-fit single-zone photoionization models measure a redshift of v/c = (2.6-3.2) 10{sup 3}. Models with two absorbing zones provide significantly improved fits, and the additional zone is measured to have a redshift of v/c = (4.6-4.9) 10{sup 2} (models including two zones suggest slightly different radii and may point to lower densities). Thus, the observed shifts are broadly consistent with those expected at the photoionization radius. The absorption spectrum revealed in MAXI J1305704 may be best explained in terms of a 'failed wind' like those predicted in some recent numerical simulations of black hole accretion flows. The robustness of the velocity shifts was explored through detailed simulations with the Chandra/MARX ray-tracing package and analysis of the zeroth-order ACIS-S3 spectrum. These tests are particularly important given the anomalously large angle between the source and the optical axis in this observation. The simulations and ACIS spectrum suggest that the shifts are not instrumental; however, strong caution is warranted. We discuss

  8. SU-E-T-606: A Novel Integrated VMAT/IMRT Technique For the Treatment of Non-Small Cell Lung Cancer

    SciTech Connect (OSTI)

    Zhao, N; Yang, R; Wang, J

    2014-06-01

    Purpose: To investigate a novel Integrated VMAT/IMRT technique which combines volumetric modulated arc therapy (VMAT) and intensity modulated radiation therapy (IMRT) for non-small cell lung cancer (NSCLC). Methods: 2 partial arcs VMAT, 5-field IMRT and Integrated VMAT/IMRT plans were created for 17 patients with NSCLC. The Integrated VMAT/IMRT technique consisted of 2 partial VMAT arcs and 5 IMRT fields. The dose distribution of planning target volume (PTV) and organs at risk (OARs) for Integrated VMAT/IMRT was compared with IMRT and VMAT. The monitor units (MUs) and treatment delivery time were also evaluated. For each plan, a dry run was performed to assess the dosimetric accuracy with MatriXX from IBA. Results: Integrated VMAT/IMRT significantly improved the target conformity and homogeneity. The V30 of normal lung for Integrated plans was significantly lower than IMRT plans (8.4% vs 9.2%; p<0.05). The V5 and mean lung dose (MLD) of normal lung for Integrated plans were 9.8% and 4.6% lower than VMAT plans (p<0.05). The maximum dose of spinal cord for Integrated plans was 4.9 Gy lower than IMRT plans (p<0.05). The mean delivery time of IMRT, VMAT and Integrated plans was 280 s, 114 s, and 327 s, respectively. The mean MUs needed for IMRT, VMAT and Integrated plans were 933, 512, and 737, respectively. The gamma pass rates were beyond 90% at the 3%/3 mm criteria when the gantry angles were set to 0 for pretreatment verification. Conclusion: Integrated VMAT/IMRT technique significantly reduced V5, V10 and MLD of normal lung compared with VMAT, and the irradiated volume of the OARs receiving medium to high dose with fewer MUs compared with IMRT. Integrated VMAT/IMRT technique can be a feasible radiotherapy technique with better plan quality and accurately delivered on the linear accelerator. Ruijie Yang was funded by the grant project: National Natural Science Foundation of China (No. 81071237). Other authors have no competing interest for this work.

  9. SU-E-T-77: Comparison of 2D and 3D Gamma Analysis in Patient-Specific QA for Prostate VMAT Plans

    SciTech Connect (OSTI)

    Clemente, F; Perez, C

    2014-06-01

    Purpose: Patient-specific QA procedures for IMRT and VMAT are traditionally performed by comparing TPS calculations with measured single point values and plane dose distributions by means of gamma analysis. New QA devices permit us to calculate 3D dose distributions on patient anatomy as redundant secondary check and reconstruct it from measurements taken with 2D and 3D detector arrays. 3D dose calculations allow us to perform DVH-based comparisons with clinical relevance, as well as 3D gamma analysis. One of these systems (Compass, IBA Dosimetry) combines traditional 2D with new anatomical-based 3D gamma analysis. This work shows the ability of this system by comparing 2D and 3D gamma analysis in pre-treatment QA for several VMAT prostate plans. Methods: Compass is capable of calculating dose as secondary check from DICOM TPS data and reconstructing it from measurements taken by a 2D ion chamber array (MatriXX Evolution, IBA Dosimetry). Both 2D and 3D gamma tests are available to compare calculated and reconstructed dose in Compass with TPS RT Dose. Results: 15 VMAT prostate plans have been measured with Compass. Dose is reconstructed with Compass for these plans. 2D gamma comparisons can be done for any plane from dose matrix. Mean gamma passing rates for isocenter planes (axial, coronal, sagittal) are (99.70.2)%, (99.90.1)%, (99.90.1)% for reconstructed dose planes. 3D mean gamma passing rates are (98.51.7)% for PTVs, (99.11.5)% for rectum, (100.00.0)% for bladder, (99.60.7)% for femoral heads and (98.14.1)% for penile bulb. Conclusion: Compass is a powerful tool to perform a complete pre-treatment QA analysis, from 2D techniques to 3D DVH-based techniques with clinical relevance. All reported values for VMAT prostate plans are in good agreement with TPS values. This system permits us to ensure the accuracy in the delivery of VMAT treatments completing a full patient-specific QA program.

  10. SU-E-T-407: Evaluation of Four Commercial Dosimetry Systems for Routine Patient-Specific Tomotherapy Delivery Quality Assurance

    SciTech Connect (OSTI)

    Xing, A; Arumugam, S; Deshpande, S; George, A; Holloway, L; Vial, P; Goozee, G

    2014-06-01

    Purpose: The purpose of this project was to evaluate the performance of four commercially available dosimetry systems for Tomotherapy delivery quality assurance (DQA). Methods: Eight clinical patient plans were chosen to represent a range of treatment sites and typical clinical plans. Four DQA plans for each patient plan were created using the TomoTherapy DQA Station (Hi-Art version 4.2.1) on CT images of the ScandiDose Delta4, IBA MatriXX Evolution, PTW Octavius 4D and Sun Nuclear ArcCHECK phantoms. Each detector was calibrated following the manufacture-provided procedure. No angular response correction was applied. All DQA plans for each detector were delivered on the Tomotherapy Hi-Art unit in a single measurement session but on different days. The measured results were loaded into the vendor supplied software for each QA system for comparison with the TPS-calculated dose. The Gamma index was calculated using 3%/3mm, 2%/2mm with 10% dose threshold of maximum TPS calculated dose. Results: Four detector systems showed comparable gamma pass rates for 3%/3m, which is recommended by AAPM TG119 and commonly used within the radiotherapy community. The averaged pass rates standard deviation for all DQA plans were (98.351.97)% for ArcCHECK, (99.9%0.87)% for Matrix, (98.5%5.09)% for Octavius 4D, (98.7%1.27)% for Delata4. The rank of the gamma pass rate for individual plans was consistent between detectors. Using 2%/2mm Gamma criteria for analysis, the Gamma pass rate decreased on average by 9%, 8%, 6.6% and 5% respectively. Profile and Gamma failure map analysis using the software tools from each dosimetry system indicated that decreased passing rate is mainly due to the threading effect of Tomo plan. Conclusion: Despite the variation in detector type and resolution, phantom geometry and software implementation, the four systems demonstrated similar dosimetric performance, with the rank of the gamma pass rate consistent for the plans considered.

  11. SU-E-T-199: How Number of Control Points Influences the Dynamic IMRT Plan Quality and Deliverability

    SciTech Connect (OSTI)

    Sharma, S; Manigandan, D; Chander, S; Subramani, V; Julka, P; Rath, G

    2014-06-01

    Purpose: To study the influence of number of control points on plan quality and deliverability. Methods: Five previously treated patients of carcinoma of rectum were selected. Planning target volume (PTV) and organs at risk (OARs) i.e. bladder and bowel were contoured. Dynamic IMRT plans (6MV, 7-fields, 45Gy/25 fractions and prescribed at 95% isodose) were created in Eclipse (Varian medical system, Palo Alto, CA) treatment planning system (TPS) for Varian CL2300C/D linear-accelerator. Base plan was calculated with 166 control points, variable mode (Eclipse Default). For generating other plans, all parameters were kept constant, only number of control points (Fixed mode) was varied as follows: 100, 166 and 200. Then, plan quality was analyzed in terms of maximum and mean dose received by the PTV and OARs. For plan deliverability, TPS calculated fluence was verified with ImatriXX (IBA Dosimetry, Germany) array and compared with TPS dose-plane using gamma index criteria of 3% dose difference and 3mm distance to agreement (DTA). Total number of monitor units (MU) required to deliver a plan was also noted. Results: The maximum variation for the PTV maximum with respect to eclipse default control point (166) was 0.28% (0.14Gy). Similarly, PTV mean varied only up to 0.22 %( 0.11Gy). Bladder maximum and bladder mean varied up to 0.51% (0.24Gy) and 0.16% (0.06Gy). The variation for the bowel maximum and bowel mean was also only 0.39% (0.19Gy) and 0.33% (0.04Gy). Total MU was within 0.32 % (4MU). Average gamma pass rate using different control points for five patients are 98.750.33%, 99.370.09%, 99.290.12%, 98.140.13% and 99.250.14% respectively. Conclusion: Slight variation (<1%) in PTV and OARs maximum and mean doses was observed with varying number of control points. Monitor unit was also not varied much. Reducing number of control points did not showed any comprise in plan deliverability in terms of gamma index pass rate.

  12. Thermodynamical and structural insights of orange II adsorption by Mg{sub R}AlNO{sub 3} layered double hydroxides

    SciTech Connect (OSTI)

    Mustapha Bouhent, Mohamed; Derriche, Zoubir; Denoyel, Renaud; Prevot, Vanessa; Forano, Claude

    2011-05-15

    [Mg{sub 1-x} Al{sub x}(OH){sub 2}][(NO{sub 3}){sub x}, nH{sub 2}O] Layered Double Hydroxide (LDH) sorbents with variable Mg/Al molar (R=(1-x)/x) ratios were investigated for adsorption of azo dye, orange II (OII) at various pH and temperature conditions. Mg{sub 2}AlNO{sub 3} displays the highest adsorption capacity with 3.611 mmol of OII per gram of Mg{sub 2}AlNO{sub 3} at 40 {sup o}C. Adsorption isotherms have been fitted using the Langmuir model and free energy of adsorption ({Delta}G{sup o}), enthalpy ({Delta}H{sup o}) and entropy ({Delta}S{sup o}) were calculated. The experimental values for {Delta}G{sup o} in temperature range between 10 and 40 {sup o}C were found to be negative indicating that a spontaneous process occurred. Positive calculated enthalpy values, characteristic of an endothermic process were found. Characterization of solids (PXRD, FTIR, UV-vis, TGA/DTA, adsorption isotherm BET analysis, SEM and Zetametry) before and after adsorption showed that adsorption proceeds in two steps. First, adsorption occurs at the LDH surface, followed by intercalation via anion exchange. -- Graphical Abstract: Structural and thermodynamical insight of adsorption/Intercalation of OII in Mg{sub R}Al LDH Display Omitted Highlights: {yields} The nitrate containing hydrotalcite-like compounds (Mg{sub R}AlNO{sub 3} LDH) were prepared by the coprecipitation method. {yields} Adsorption of anionic orange dye(OII) is studied on LDHs at different temperatures. {yields} The adsorption process is well described by the Langmuir isotherm model. {yields} Mg{sub 2}AlNO{sub 3} displays the highest adsorption capacity with 3.611 mmol of OII per gram of Mg{sub 2}AlNO{sub 3} at 40 {sup o}C. {yields} Adsorption process does not occur on the surface of the LDH only but an intercalation process is also occurring concomitantly according to the thermodynamical values.

  13. NAESB Business Practice Subcommittee (BPS) ATC Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E V I L L E P O W E R A D M I N I S T R A T I O N 8 Previous Ideas for Contract Path Language Proposal 2 Add as an additional requirement: XXX-1.4 Each Transmission...

  14. H. UNREVIEWED SAFETY QUESTIONS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ...SGML220033.XXX 220033 WReier-Aviles on DSKGBLS3C1PROD with CFR 554 10 CFR Ch. III (1-1-10 Edition) 835.1 835.902-835.903 Reserved Subpart K-Design and Control 835.1001 ...

  15. The original of this document contains information which is subject to withholdi

    Office of Environmental Management (EM)

    United States Department of Energy Office of Hearings and Appeals In the Matter of: Personnel Security Hearing ) ) Filing Date: June 13, 2016 ) ) Case No.: PSH-16-0052 __________________________________________) Issued: September 2, 2016 ______________________ Administrative Judge Decision ______________________ William M. Schwartz, Administrative Judge: This Decision concerns the eligibility of XXXXX XXX XXXXX (hereinafter referred to as "the individual") to hold an access

  16. Powder Metallurgy of Uranium Alloy Fuels for TRU-Burning Reactors Final Technical Report

    SciTech Connect (OSTI)

    McDeavitt, Sean M

    2011-04-29

    Overview Fast reactors were evaluated to enable the transmutation of transuranic isotopes generated by nuclear energy systems. The motivation for this was that TRU isotopes have high radiotoxicity and relatively long half-lives, making them unattractive for disposal in a long-term geologic repository. Fast reactors provide an efficient means to utilize the energy content of the TRUs while destroying them. An enabling technology that requires research and development is the fabrication metallic fuel containing TRU isotopes using powder metallurgy methods. This project focused upon developing a powder metallurgical fabrication method to produce U-Zr-transuranic (TRU) alloys at relatively low processing temperatures (500ºC to 600ºC) using either hot extrusion or alpha-phase sintering for charecterization. Researchers quantified the fundamental aspects of both processing methods using surrogate metals to simulate the TRU elements. The process produced novel solutions to some of the issues relating to metallic fuels, such as fuel-cladding chemical interactions, fuel swelling, volatility losses during casting, and casting mold material losses. Workscope There were two primary tasks associated with this project: 1. Hot working fabrication using mechanical alloying and extrusion • Design, fabricate, and assemble extrusion equipment • Extrusion database on DU metal • Extrusion database on U-10Zr alloys • Extrusion database on U-20xx-10Zr alloys • Evaluation and testing of tube sheath metals 2. Low-temperature sintering of U alloys • Design, fabricate, and assemble equipment • Sintering database on DU metal • Sintering database on U-10Zr alloys • Liquid assisted phase sintering on U-20xx-10Zr alloys Appendices Outline Appendix A contains a Fuel Cycle Research & Development (FCR&D) poster and contact presentation where TAMU made primary contributions. Appendix B contains MSNE theses and final defense presentations by David Garnetti and Grant Helmreich

  17. Weatherization and Intergovernmental Programs Office Organization Chart

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lead TPO P. Mendelson Budget Analyst P. Hayes EERE ID #433 Technical Associate E. Long Communications Lead Y. Masiky Communications A. Wein Correspondence T. Oxendine Administrative D. Collins Operations Supervisor James Carlisle Director Anna Maria Garcia WAP Program Manager David Rinebolt Supervisory TPO E. Burrin Lead TPO J. Olsen EERE ID #XXX Program Communications D. Hawkins Energy Technology Project Specialists C. Askew K. Foote S. Glaize S. Green T. Holloway P. Jiacoletti M. Peterson J.

  18. SANDIA REPORT SAND2011-9304 Unlimited Release

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    304 Unlimited Release Printed December 2011XXX 2011 Extreme Ocean Wave Conditions for Northern California Wave Energy Conversion Device Jonathan C. Berg Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under

  19. Comparison of various clocks at LANL LAPP facility

    SciTech Connect (OSTI)

    Dighe, Kalpak Arvind

    2010-10-29

    Several 40+ hour data records obtained in Oct 2010 from the Los Alamos Portable Pulser Facility (LAPP) Operational clocks show variations of {approx} 27 nsec. Several 16+ hour data records obtained in Aug 2010 from non-operational clocks like those used operationally from 2005 to the present show variations of {approx} 35 nsec. SLRE variability is xxx +/- yyy sec (std dev). SLRE occasionally show unusual events such as those discussed by Pongratz. We will continue to study and monitor.

  20. The original of this document contains information which is subject to withholdi

    Office of Environmental Management (EM)

    20, 2016 ) Case No.: PSH-16-0057 ) _________________________________________ ) Issued: September 1, 2016 ____________________________ Administrative Judge Decision ____________________________ Janet R. H. Fishman, Administrative Judge: This Decision concerns the eligibility of XXXX XXX XXXX ("the Individual") for access authorization under the Department of Energy's (DOE) regulations set forth at 10 C.F.R. Part 710, Subpart A, entitled, "Criteria and Procedures for Determining

  1. TASK ORDER

    National Nuclear Security Administration (NNSA)

    NA0000XXX Task Order No: DE-DT000XXXX Statement of Work August 7, 2015 Task Order Title: Design, Integration, Construction, Communications, and Engineering (DICCE) Services for Port of Cat Lai, Vietnam. Scope: The Contractor shall design, construct, and integrate fully functional portal monitor and communications systems at designated sites in Vietnam. * Port of Cat Lai Requirements Documents: The following task order requirements describe key milestones and deliverables. For a more complete

  2. Probing variations in fundamental constants with radio and optical quasar absorption-line observations.

    SciTech Connect (OSTI)

    Tzanavaris, P.; Murphy, M. T.; Webb, J. K.; Flambaum, V. V.; Curran, S. J.; Physics; Univ. of New South Wales; Inst. of Astronomy

    2007-01-01

    Nine quasar absorption spectra at 21-cm and ultraviolet (UV) rest-frame wavelengths are used to estimate possible variations in x {triple_bond} {alpha}{sup 2}g{sub p}{mu}, where {alpha} is the fine structure constant, g{sub p} the proton g-factor and {mu} {triple_bond} m{sub e}/m{sub p} is the electron-to-proton mass ratio. We find <{Delta}x/x>{sub total}{sup weighted} = (0.63 {+-} 0.99) x 10{sup -5} over a redshift range 0.23 {le} z{sub abs} {le} 2.35 which corresponds to look-back times of 2.7-10.5 billion years. A linear fit against look-back time, tied to {Delta}x/x = 0 at z = 0, gives a best-fitting rate of change of {dot x}/x = (-0.6 {+-} 1.2) x 10{sup -5} yr{sup -1}. We find no evidence for strong angular variations in x across the sky. Our sample is much larger than most previous samples and demonstrates that intrinsic line-of-sight velocity differences between the 21-cm and UV absorption redshifts, which have a random sign and magnitude in each absorption system, limit our precision. The data directly imply that the average magnitude of this difference is {Delta}v{sub los}-6 km s{sup -1}. Combining our {Delta}x/x measurement with absorption-line constraints on {alpha}-variation yields strong limits on the variation of {mu}. Our most conservative estimate, obtained by assuming no variations in {alpha} or g{sub p} is simply {Delta}{mu}/{mu} = <{Delta}x/x>{sub total}{sup weighted}. If we use only the four high-redshift absorbers in our sample, we obtain {Delta}{mu}/{mu} = (0.58 {+-} 1.95) x 10{sup -5}, which agrees (2{sigma}) with recent, more direct estimates from two absorption systems containing molecular hydrogen, also at high redshift, and which have hinted at a possible {mu}-variation, {Delta}{mu}/{mu} = (-2.0 {+-} 0.6) x 10{sup -5}. Our method of constraining {Delta}{mu}/{mu} is completely independent from the molecular hydrogen observations. If we include the low-redshift systems, our {Delta}{mu}/{mu} result differs significantly from the high

  3. Impact of leaf motion constraints on IMAT plan quality, deliver accuracy, and efficiency

    SciTech Connect (OSTI)

    Chen Fan; Rao Min; Ye Jinsong; Shepard, David M.; Cao Daliang

    2011-11-15

    Purpose: Intensity modulated arc therapy (IMAT) is a radiation therapy delivery technique that combines the efficiency of arc based delivery with the dose painting capabilities of intensity modulated radiation therapy (IMRT). A key challenge in developing robust inverse planning solutions for IMAT is the need to account for the connectivity of the beam shapes as the gantry rotates from one beam angle to the next. To overcome this challenge, inverse planning solutions typically impose a leaf motion constraint that defines the maximum distance a multileaf collimator (MLC) leaf can travel between adjacent control points. The leaf motion constraint ensures the deliverability of the optimized plan, but it also impacts the plan quality, the delivery accuracy, and the delivery efficiency. In this work, the authors have studied leaf motion constraints in detail and have developed recommendations for optimizing the balance between plan quality and delivery efficiency. Methods: Two steps were used to generate optimized IMAT treatment plans. The first was the direct machine parameter optimization (DMPO) inverse planning module in the Pinnacle{sup 3} planning system. Then, a home-grown arc sequencer was applied to convert the optimized intensity maps into deliverable IMAT arcs. IMAT leaf motion constraints were imposed using limits of between 1 and 30 mm/deg. Dose distributions were calculated using the convolution/superposition algorithm in the Pinnacle{sup 3} planning system. The IMAT plan dose calculation accuracy was examined using a finer sampling calculation and the quality assurance verification. All plans were delivered on an Elekta Synergy with an 80-leaf MLC and were verified using an IBA MatriXX 2D ion chamber array inserted in a MultiCube solid water phantom. Results: The use of a more restrictive leaf motion constraint (less than 1-2 mm/deg) results in inferior plan quality. A less restrictive leaf motion constraint (greater than 5 mm/deg) results in improved plan

  4. Criteria and Processes for the Certification of Non-Radioactive Hazardous and Non-Hazardous Wastes

    SciTech Connect (OSTI)

    Dominick, J

    2008-12-18

    Hazardous Waste Management (RHWM) organization is responsible for the review and maintenance of this document. It should be noted that the DOE metal recycling moratorium is still in effect and is implemented as outlined in reference 17 when metals are being dispositioned for disposal/re-use/recycling off-site. This document follows the same methodology as described in the previously approved 1992 Moratorium document. Generator knowledge and certification are the primary means of characterization. Sampling and analysis are used when there is insufficient knowledge of a waste to determine if it contains added radioactivity. Table 1 (page 12) presents a list of LLNL's analytical methods for evaluating volumetrically contaminated waste and updates the reasonably achievable analytical-method-specific Minimum Detectable Concentrations (MDCs) for various matrices. Results from sampling and analysis are compared against the maximum MDCs for the given analytical method and the sample specific MDC to determine if the sample contains DOE added volumetric radioactivity. The evaluation of an item that has a physical form, and history of use, such that accessible surfaces may be potentially contaminated, is based on DOE Order 5400.5 (Reference 3), and its associated implementation guidance document DOE G 441.1-XX, Control and Release of Property with Residual Radioactive Material (Reference 4). The guidance document was made available for use via DOE Memorandum (Reference 5). Waste and materials containing residual radioactivity transferred off-site must meet the receiving facilities Waste Acceptance Criteria (if applicable) and be in compliance with other applicable federal or state requirements.

  5. Open Issues

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 2011 Resolved -- Linking error when mixing C++ and Fortran using PGI under xt-asyncpe/4.9 July 1, 2011 by Helen He Symptom Mixed C++ and Fortran codes had the linking error using PGI under xt-asyncpe: Read the full post Resolved -- Incorrect path with bash under csh July 1, 2011 by Helen He Symptom: With default csh or tcsh shell, entering bash (as login or non-login) messes up the path, causing qsub or ftn command either not found or uses wrong path. Unloadind and loading the PrgEnv-xxx

  6. Energy levels and radiative rates for transitions in B-like to F-like Kr ions (Kr XXXII-XXVIII)

    SciTech Connect (OSTI)

    Aggarwal, K.M. Keenan, F.P.; Lawson, K.D.

    2008-05-15

    Energy levels, radiative rates, oscillator strengths, line strengths, and lifetimes have been calculated for transitions in B-like to F-like Kr ions, Kr XXXIII-XXVIII. For the calculations, the fully relativistic GRASP code has been adopted, and results are reported for all electric dipole (E1), electric quadrupole (E2), magnetic dipole (M1), and magnetic quadrupole (M2) transitions among the lowest 125, 236, 272, 226, and 113 levels of Kr XXXII, Kr XXXI, Kr XXX, Kr XXIX, and Kr XXVIII, respectively, belonging to the n {<=} 3 configurations. Comparisons are made with earlier available theoretical and experimental results, and some discrepancies have been noted and explained.

  7. Microsoft PowerPoint - 08 Lawrence 2010 DOE PM Workshop_EO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    13514_03-01-10_presentation | Department of Energy 8 Lawrence 2010 DOE PM Workshop_EO 13514_03-01-10_presentation Microsoft PowerPoint - 08 Lawrence 2010 DOE PM Workshop_EO 13514_03-01-10_presentation Microsoft PowerPoint - 08 Lawrence 2010 DOE PM Workshop_EO 13514_03-01-10_presentation (1.69 MB) More Documents & Publications OVERVIEW OF EXECUTIVE ORDER 13XXX Federal Leadership in Environmental, Energy and Economic Performance Microsoft PowerPoint - 05 Okonski final Project Management

  8. Elastic and Related Transport Cross Sections, Charge Transfer: Data from the Controlled Fusion Atomic Data Center (CFADC)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Krstic, P. S; Schultz, D. R.

    Data files available in this section of the Controlled Fusion Atomic Data Center (CFADC) are found under the following headings: • Isotopomers of hydrogen ions, atoms and molecules and helium • Vibrationally excited states of hydrogen molecule with proton, and hydrogen molecular ion with hydrogen • Isotopomers of hydrogen ions with carbon • Isotopomers of hydrogen ions with argon • Hydrogen ions with neon • Hydrogen ions with krypton • Hydrogen ions with xenon • Elastic and other cross sections from ApJ xxx, yyyy (2008) Each heading is a link to more information, the data, and customized interfaces. (Specialized Interface)

  9. Nuclear Material Transaction Report nrc741_1

    National Nuclear Security Administration (NNSA)

    A A 1 1 1 1 FOREIGN COMPANY NAME COMPANY ADDRESS CITY, COUNTRY CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 3 RRRR XXX 1 33 20 210.00 68.00 03 31 2008 1 FOREIGN 1 EG 309 J 177999.00 3.2800 5838.00 2 3 FOREIGN FOREIGN 1 1 EG EG 309 309 J J 177834.00 177910.00 3.2900 3.2880 5851.00 5850.00 3061 Example 4-a

  10. Nuclear Material Transaction Report nrc741_1

    National Nuclear Security Administration (NNSA)

    A B 1 1 1 1 FOREIGN COMPANY NAME COMPANY ADDRESS CITY, COUNTRY CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 3 RRRR XXX 1 33 20 210.00 68.00 04 05 2008 1 FOREIGN 1 EG 309 J 177999.00 3.2800 5838.00 2 3 FOREIGN FOREIGN 1 1 EG EG 309 309 J J 177834.00 177910.00 3.2900 3.2880 5851.00 5850.00 Example 4-b

  11. Structural analysis of the dodecameric proteasome activator PafE in Mycobacterium tuberculosis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bai, Lin; Hu, Kuan; Wang, Tong; Jastrab, Jordan B.; Darwin, K. Heran; Li, Huilin

    2016-03-21

    Here, the human pathogen Mycobacterium tuberculosis (Mtb) requires a proteasome system to cause lethal infections in mice. We recently found that proteasome accessory factor E (PafE, Rv3780) activates proteolysis by the Mtb proteasome independently of adenosine triphosphate (ATP). Moreover, PafE contributes to the heat-shock response and virulence of Mtb. Here, we show that PafE subunits formed four-helix bundles similar to those of the eukaryotic ATP-independent proteasome activator subunits of PA26 and PA28. However, unlike any other known proteasome activator, PafE formed dodecamers with 12-fold symmetry, which required a glycine-XXX-glycine-XXX-glycine motif that is not found in previously described activators. Intriguingly, themore » truncation of the PafE carboxyl-terminus resulted in the robust binding of PafE rings to native proteasome core particles and substantially increased proteasomal activity, suggesting that the extended carboxyl-terminus of this cofactor confers suboptimal binding to the proteasome core particle. Collectively, our data show that proteasomal activation is not limited to hexameric ATPases in bacteria.« less

  12. Semiclassical circular strings in AdS{sub 5} and 'long' gauge field strength operators

    SciTech Connect (OSTI)

    Park, I.Y.; Tirziu, A.; Tseytlin, A.A.

    2005-06-15

    We consider circular strings rotating with equal spins S{sub 1}=S{sub 2}=S in two orthogonal planes in AdS{sub 5} and suggest that they may be dual to long gauge-theory operators built out of self-dual components of gauge field strength. As was found in hep-th/0404187, the one-loop anomalous dimensions of the such gauge-theory operators are described by an antiferromagnetic XXX{sub 1} spin chain and scale linearly with length L>>1. We find that in the case of rigid rotating string both the classical energy E{sub 0} and the 1-loop string correction E{sub 1} depend linearly on the spin S (within the stability region of the solution). This supports the identification of the rigid rotating string with the gauge-theory operator corresponding to the maximal-spin (ferromagnetic) state of the XXX{sub 1} spin chain. The energy of more general rotating and pulsating strings also happens to scale linearly with both the spin and the oscillation number. Such solutions should be dual to other lower-spin states of the spin chain, with the antiferromagnetic ground state presumably corresponding to the string pulsating in two planes with no rotation.

  13. A hybrid aluminium alloy and its zoo of interacting nano-precipitates

    SciTech Connect (OSTI)

    Wenner, Sigurd; Marioara, Calin Daniel; Andersen, Sigmund Jarle; Ervik, Martin; Holmestad, Randi

    2015-08-15

    An alloy with aluminium as its base element is heat treated to form a multitude of precipitate phases known from different classes of industrial alloys: Al–Cu(–Mg), Al–Mg–Si–Cu, and Al–Zn–Mg. Nanometer-sized needle-shaped particles define the starting point of the phase nucleation, after which there is a split in the precipitation sequence into six phases of highly diverse compositions and morphologies. There are several unique effects of phases from different alloy systems being present in the same host lattice, of which we concentrate on two: the replacement of Ag by Zn on the Ω interface and the formation of combined plates of the θ′ and C phases. Using atomically resolved scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy, we investigate the formation mechanisms, crystal structures and compositions of the precipitates. - Graphical abstract: Display Omitted - Highlights: • An aluminium alloy composition in-between the 2/6/7xxx systems was investigated. • Six different phases from the three systems coexist in an over-aged state. • All phases with 〈001〉{sub Al} coherencies can nucleate on 6xxx needle precipitates. • Modified theta′ and omega interfaces are observed.

  14. Response to Comment on "The National Ignition Facility Laser Performance Status"

    SciTech Connect (OSTI)

    Haynam, C A; Sacks, R A; Moses, E I; Manes, K; Haan, S; Spaeth, M L

    2007-12-11

    We appreciate Stephen Bodner's continuing interest in the performance of the NIF laser system. However, we find it necessary to disagree with the conclusions he reached in his comments [Appl. Opt. 47, XXX (2008)] on 'National Ignition Facility Laser Performance Status' [Appl. Opt. 46, 3276 (2007)]. In fact, repeated and ongoing tests of the NIF beamlines have demonstrated that NIF can be expected not only to meet or exceed its requirements as established in the mid-1990s in the document National Ignition Facility Functional Requirements and Primary Criteria [Revision 1.3, Report NIF-LLNL-93-058 (1994)], but also to have the flexibility that provides for successfully meeting an ever expanding range of mission goals, including those of ignition.

  15. Line Soliton Interactions of the Kadomtsev-Petviashvili Equation

    SciTech Connect (OSTI)

    Biondini, Gino

    2007-08-10

    We study soliton solutions of the Kadomtsev-Petviashvili II equation (-4u{sub t}+6uu{sub x}+3u{sub xxx}){sub x}+u{sub yy}=0 in terms of the amplitudes and directions of the interacting solitons. In particular, we classify elastic N-soliton solutions, namely, solutions for which the number, directions, and amplitudes of the N asymptotic line solitons as y{yields}{infinity} coincide with those of the N asymptotic line solitons as y{yields}-{infinity}. We also show that the (2N-1){exclamation_point}{exclamation_point} types of solutions are uniquely characterized in terms of the individual soliton parameters, and we calculate the soliton position shifts arising from the interactions.

  16. Influence of Gaussian white noise on the frequency-dependent first nonlinear polarizability of doped quantum dot

    SciTech Connect (OSTI)

    Ganguly, Jayanta; Ghosh, Manas

    2014-05-07

    We investigate the profiles of diagonal components of frequency-dependent first nonlinear (β{sub xxx} and β{sub yyy}) optical response of repulsive impurity doped quantum dots. We have assumed a Gaussian function to represent the dopant impurity potential. This study primarily addresses the role of noise on the polarizability components. We have invoked Gaussian white noise consisting of additive and multiplicative characteristics (in Stratonovich sense). The doped system has been subjected to an oscillating electric field of given intensity, and the frequency-dependent first nonlinear polarizabilities are computed. The noise characteristics are manifested in an interesting way in the nonlinear polarizability components. In case of additive noise, the noise strength remains practically ineffective in influencing the optical responses. The situation completely changes with the replacement of additive noise by its multiplicative analog. The replacement enhances the nonlinear optical response dramatically and also causes their maximization at some typical value of noise strength that depends on oscillation frequency.

  17. From weak discontinuities to nondissipative shock waves

    SciTech Connect (OSTI)

    Garifullin, R. N. Suleimanov, B. I.

    2010-01-15

    An analysis is presented of the effect of weak dispersion on transitions from weak to strong discontinuities in inviscid fluid dynamics. In the neighborhoods of transition points, this effect is described by simultaneous solutions to the Korteweg-de Vries equation u{sub t}'+ uu{sub x}' + u{sub xxx}' = 0 and fifth-order nonautonomous ordinary differential equations. As x{sup 2} + t{sup 2} {yields}{infinity}, the asymptotic behavior of these simultaneous solutions in the zone of undamped oscillations is given by quasi-simple wave solutions to Whitham equations of the form r{sub i}(t, x) = tl{sub i} x/t{sup 2}.

  18. Bifurcations of traveling wave solutions for an integrable equation

    SciTech Connect (OSTI)

    Li Jibin; Qiao Zhijun

    2010-04-15

    This paper deals with the following equation m{sub t}=(1/2)(1/m{sup k}){sub xxx}-(1/2)(1/m{sup k}){sub x}, which is proposed by Z. J. Qiao [J. Math. Phys. 48, 082701 (2007)] and Qiao and Liu [Chaos, Solitons Fractals 41, 587 (2009)]. By adopting the phase analysis method of planar dynamical systems and the theory of the singular traveling wave systems to the traveling wave solutions of the equation, it is shown that for different k, the equation may have infinitely many solitary wave solutions, periodic wave solutions, kink/antikink wave solutions, cusped solitary wave solutions, and breaking loop solutions. We discuss in a detail the cases of k=-2,-(1/2),(1/2),2, and parametric representations of all possible bounded traveling wave solutions are given in the different (c,g)-parameter regions.

  19. NRC Form 741

    National Nuclear Security Administration (NNSA)

    A 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 4 YYY XXX 1 31 20 50397.00 2335.00 03 31 2008 1 FAB FUEL ELE -1 1 20 309 J 2 M 377609.00 4.7962 18111.00 2 3 4 FAB FUEL ELE -2 FAB FUEL ELE -3 FAB FUEL ELE -4 1 1 1 20 20 20 309 309 309 J J J 2 2 2 M M M 42114.00 377855.00 41992.00 107 107 3.1913 4.7960 3.1911 1344.00 18122.00 1340.00 30 30 20358 Example 1-a

  20. Nuclear Material Transaction Report NRC 741_1

    National Nuclear Security Administration (NNSA)

    D 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 4 YYY XXX 1 31 20 -50397.00 -2335.00 2 31 20 50300.00 2330.00 04 23 2008 Example 1-d 002 1 FAB FUEL ELE -2 -1 20 309 J -377609.00 4.7962 -18111.00 101 004 103 2 3 4 FAB FUEL ELE -2 FAB FUEL ELE -4 FAB FUEL ELE -4 1 -1 1 20 20 20 309 309 309 J J J 377509.00 -41992.00 42002.00 4.7962 3.1911 3.1911 18000.00 -1340.00 1450.0

  1. Nuclear Material Transaction Report NRC741_1

    National Nuclear Security Administration (NNSA)

    C 1 1 1 1 COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT COMPANY NAME COMPANY ADDRESS CITY, STATE ZIP CODE CONTACT 4 YYY XXX 1 31 20 -50397.00 -2335.00 2 31 20 50300.00 2330.00 04 16 2008 Example 1-c 002 1 FAB FUEL ELE -2 -1 20 309 J -377609.00 4.7962 -18111.00 101 004 103 2 3 4 FAB FUEL ELE -2 FAB FUEL ELE -4 FAB FUEL ELE -4 1 -1 1 20 20 20 309 309 309 J J J 377509.00 -41992.00 42002.00 -107 107 4.7962 3.1911 3.1911 18000.00 -1340.00 1450.00 -30 3

  2. Welding the four most popular aluminum alloys

    SciTech Connect (OSTI)

    Irving, B.

    1994-02-01

    The fact that business is good in aluminum welding is a sure sign that more manufacturers and fabricators are using GMA and GTA welding to build new products out of this lightweight nonferrous metal. Among the most widely specified weldable grades are Alloys 6061, 5083, 5052 and 5454. A rundown on these four alloys, including properties and selected applications, is provided. Any company working with aluminum for the first time needs to know something about these four alloys. Alloys of copper-magnesium-silicon combination, of which 6061 is one, are heat-treatable. The three 5XXX series alloys, on the other hand, are nonheat-treatable. According to P.B. Dickerson, consultant, Lower Burrell, Pa., 5083, because of its high magnesium content, is the easiest of the four alloys to arc weld. Dickerson put the cut-off point in weldability at 3.5% magnesium. To prevent cracking, he added, both 6061 and 5052 require much more filler metal than do the other two alloys. Alloy 6061 consists of 0.25Cu, 0.6Si, 1.0Mg, and 0.20Cr. The main applications for 6061 aluminum are structural, architectural, automotive, railway, marine and pipe. It has good formability, weldability, corrosion resistance and strength. Although the 6XXX series alloys are prone to hot cracking, this condition can be readily overcome by correct choice of joint design and electrode. The most popular temper for 6061 is T6, although the -T651, -T4, and -F temper are also popular. The -T651 temper is like a -T6 temper, only it has received some final stretch hardening. The -T4 temper has been solution heat-treated and quenched. The -F temper is in the as-fabricated condition.

  3. Cleavage of peptide bonds bearing ionizable amino acids at P{sub 1} by serine proteases with hydrophobic S{sub 1} pocket

    SciTech Connect (OSTI)

    Qasim, Mohammad A.; Song, Jikui; Markley, John L.; Laskowski, Michael

    2010-10-01

    Research highlights: {yields} Large pK shifts in ionizable groups when buried in the protein interior. {yields} Substrate dependent shifts in pH optimum for serine proteases. {yields} Lys side chain is a stronger acid in serine protease S{sub 1} pocket than Asp side chain. -- Abstract: Enzymatic hydrolysis of the synthetic substrate succinyl-Ala-Ala-Pro-Xxx-pNA (where Xxx = Leu, Asp or Lys) catalyzed by bovine chymotrypsin (CHYM) or Streptomyces griseus protease B (SGPB) has been studied at different pH values in the pH range 3-11. The pH optima for substrates having Leu, Asp, and Lys have been found to be 7.5-8.0, 5.5-6.0, and {approx}10, respectively. At the normally reported pH optimum (pH 7-8) of CHYM and SGPB, the substrate with Leu at the reactive site is more than 25,000-fold more reactive than that with Asp. However, when fully protonated, Asp is nearly as good a substrate as Leu. The pK values of the side chains of Asp and Lys in the hydrophobic S{sub 1} pocket of CHYM and SGPB have been calculated from pH-dependent hydrolysis data and have been found to be about 9 for Asp and 7.4 and 9.7 for Lys for CHYM and SGPB, respectively. The results presented in this communication suggest a possible application of CHYM like enzymes in cleaving peptide bonds contributed by acidic amino acids between pH 5 and 6.

  4. Pulsed Joining Of Body-In-White Components

    SciTech Connect (OSTI)

    Bonnen, John

    2014-09-30

    The objective of this project was to develop cost efficient high quality pulsed welding (PW) technology for joining 6xxx Aluminum and High Strength Steel (with tensile strength above 580MPa) components enabling broad usage of hydroformed parts and leading to substantial weight reduction of cars and trucks to reduce US demand on petroleum, lower carbon emissions and energy expenditures. In general, pulsed welding is a form of impact welding where two dissimilar metal pieces are joined by accelerating one to velocities exceeding 300m/s at which point the first piece strikes the second and forms a weld. In this work, two methods were used to accelerate the flyer material: Electro-Magnetic (EM) pulse and Electro-Hydraulic (EH) pulse launching. The advantage of pulsed welding techniques is that welds can be formed between two materials that cannot otherwise be welded: high strength aluminum and high strength steel. The technical objectives of the project included: 1) developing cost affordable production feasible tooling design for PW of 6xxx aluminum to High Strength steel with strengths above 580MPa; 2) demonstrating that fabricated joints can exceed the required service load strength initially at the coupon level and then at the component level; 3) developing fundamental understanding of the mechanisms of joint formation and conditions leading to formation of high quality PW joint; and 4) creating a numerical model predicting the tooling and electric discharge parameters necessary for the joint formation and that satisfy the targeted strength parameters. The project successfully developed: 1) EM and EH pulsed welds between high strength aluminum with tensile strengths exceeding 240MPa and steels exceeding 580MPa; 2) pulsed welds of extrusions with strengths exceeding project requirements; 3) EM and EH flyer launch models and 4) weld interface formation models. However, the grant holder, Ford Motor Company, could see no path to commercialization and the work was

  5. A BAYESIAN APPROACH TO LOCATING THE RED GIANT BRANCH TIP MAGNITUDE. II. DISTANCES TO THE SATELLITES OF M31

    SciTech Connect (OSTI)

    Conn, A. R.; Parker, Q. A.; Zucker, D. B.; Ibata, R. A.; Martin, N. F.; Lewis, G. F.; McConnachie, A. W.; Irwin, M. J.; Chapman, S. C.; Tanvir, N.; Fardal, M. A.; Ferguson, A. M. N.; Valls-Gabaud, D.

    2012-10-10

    In 'A Bayesian Approach to Locating the Red Giant Branch Tip Magnitude (Part I)', a new technique was introduced for obtaining distances using the tip of the red giant branch (TRGB) standard candle. Here we describe a useful complement to the technique with the potential to further reduce the uncertainty in our distance measurements by incorporating a matched-filter weighting scheme into the model likelihood calculations. In this scheme, stars are weighted according to their probability of being true object members. We then re-test our modified algorithm using random-realization artificial data to verify the validity of the generated posterior probability distributions (PPDs) and proceed to apply the algorithm to the satellite system of M31, culminating in a three-dimensional view of the system. Further to the distributions thus obtained, we apply a satellite-specific prior on the satellite distances to weight the resulting distance posterior distributions, based on the halo density profile. Thus in a single publication, using a single method, a comprehensive coverage of the distances to the companion galaxies of M31 is presented, encompassing the dwarf spheroidals Andromedas I-III, V, IX-XXVII, and XXX along with NGC 147, NGC 185, M33, and M31 itself. Of these, the distances to Andromedas XXIV-XXVII and Andromeda XXX have never before been derived using the TRGB. Object distances are determined from high-resolution tip magnitude posterior distributions generated using the Markov Chain Monte Carlo technique and associated sampling of these distributions to take into account uncertainties in foreground extinction and the absolute magnitude of the TRGB as well as photometric errors. The distance PPDs obtained for each object both with and without the aforementioned prior are made available to the reader in tabular form. The large object coverage takes advantage of the unprecedented size and photometric depth of the Pan-Andromeda Archaeological Survey. Finally, a

  6. Uranium Nitride as LWR TRISO Fuel: Thermodynamic Modeling of U-C-N

    SciTech Connect (OSTI)

    Besmann, Theodore M; Shin, Dongwon

    2012-01-01

    TRISO coated particle fuel is envisioned as a next generation replacement for current urania pellet fuel in LWR applications. To obtain adequate fissile loading the kernel of the TRISO particle will need to be UN. In support of the fuel development effort, an assessment of phase regions of interest in the U-C-N system was undertaken as the fuel will be prepared by the carbothermic reduction of the oxide and it will be in equilibrium with carbon within the TRISO particle. The phase equilibria and thermochemistry of the U-C-N system is reviewed, including nitrogen pressure measurements above various phase fields. Selected measurements were used to fit a first order model of the UC1-xNx phase, represented by the inter-solution of UN and UC. Fit to the data was significantly improved by also adjusting the heat of formation for UN by ~12 kJ/mol and the phase equilbria was best reproduced by also adjusting the heat for U2N3 by +XXX. The determined interaction parameters yielded a slightly positive deviation from ideality, which agrees with lattice parameter measurements which show positive deviation from Vegard s law. The resultant model together with reported values for other phases in the system were used to generate isothermal sections of the U-C-N phase diagram. Nitrogen partial pressures were also computed for regions of interest.

  7. Matching the Hagedorn temperature in AdS/CFT correspondence

    SciTech Connect (OSTI)

    Harmark, Troels; Orselli, Marta

    2006-12-15

    We match the Hagedorn/deconfinement temperature of planar N=4 super Yang-Mills (SYM) on RxS{sup 3} to the Hagedorn temperature of string theory on AdS{sub 5}xS{sup 5}. The match is done in a near-critical region where both gauge theory and string theory are weakly coupled. The near-critical region is near a point with zero temperature and critical chemical potential. On the gauge-theory side we are taking a decoupling limit found in Ref. 7 in which the physics of planar N=4 SYM is given exactly by the ferromagnetic XXX{sub 1/2} Heisenberg spin chain. We find moreover a general relation between the Hagedorn/deconfinement temperature and the thermodynamics of the Heisenberg spin chain and we use this to compute it in two distinct regimes. On the string-theory side, we identify the dual limit for which the string tension and string coupling go to zero. This limit is taken of string theory on a maximally supersymmetric pp-wave background with a flat direction, obtained from a Penrose limit of AdS{sub 5}xS{sup 5}. We compute the Hagedorn temperature of the string theory and find agreement with the Hagedorn/deconfinement temperature computed on the gauge-theory side.

  8. Bethe Ansatz and supersymmetric vacua

    SciTech Connect (OSTI)

    Nekrasov, Nikita; Shatashvili, Samson

    2009-05-14

    Supersymmetric vacua of two dimensional N = 4 gauge theories with matter, softly broken by the twisted masses down to N = 2, are shown to be in one-to-one correspondence with the eigenstates of integrable spin chain Hamiltonians. Examples include: the Heisenberg SU(2)XXX spin chain which is mapped to the two dimensional U(N) theory with fundamental hypermultiplets, the XXZ spin chain which is mapped to the analogous three dimensional super-Yang-Mills theory compactified on a circle, the XYZ spin chain and eight-vertex model which are related to the four dimensional theory compactified on T{sup 2}. A consequence of our correspondence is the isomorphism of the quantum cohomology ring of various quiver varieties, such as cotangent bundles to (partial) flag varieties and the ring of quantum integrals of motion of various spin chains. The correspondence extends to any spin group, representations, boundary conditions, and inhomogeneity, it includes Sinh-Gordon and non-linear Schroedinger models as well as the dynamical spin chains like Hubbard model. Compactifications of four dimensional N = 2 theories on a two-sphere lead to the instanton-corrected Bethe equations.

  9. Density of defects and the scaling law of the entanglement entropy in quantum phase transition of one-dimensional spin systems induced by a quench

    SciTech Connect (OSTI)

    Basu, Banasri; Bandyopadhyay, Pratul; Majumdar, Priyadarshi

    2011-03-15

    We have studied quantum phase transition induced by a quench in different one-dimensional spin systems. Our analysis is based on the dynamical mechanism which envisages nonadiabaticity in the vicinity of the critical point. This causes spin fluctuation which leads to the random fluctuation of the Berry phase factor acquired by a spin state when the ground state of the system evolves in a closed path. The two-point correlation of this phase factor is associated with the probability of the formation of defects. In this framework, we have estimated the density of defects produced in several one-dimensional spin chains. At the critical region, the entanglement entropy of a block of L spins with the rest of the system is also estimated which is found to increase logarithmically with L. The dependence on the quench time puts a constraint on the block size L. It is also pointed out that the Lipkin-Meshkov-Glick model in point-splitting regularized form appears as a combination of the XXX model and Ising model with magnetic field in the negative z axis. This unveils the underlying conformal symmetry at criticality which is lost in the sharp point limit. Our analysis shows that the density of defects as well as the scaling behavior of the entanglement entropy follows a universal behavior in all these systems.

  10. Optimizing potential energy functions for maximal intrinsic hyperpolarizability

    SciTech Connect (OSTI)

    Zhou Juefei; Szafruga, Urszula B.; Kuzyk, Mark G.; Watkins, David S.

    2007-11-15

    We use numerical optimization to study the properties of (1) the class of one-dimensional potential energy functions and (2) systems of point nuclei in two dimensions that yield the largest intrinsic hyperpolarizabilities, which we find to be within 30% of the fundamental limit. In all cases, we use a one-electron model. It is found that a broad range of optimized potentials, each of very different character, yield the same intrinsic hyperpolarizability ceiling of 0.709. Furthermore, all optimized potential energy functions share common features such as (1) the value of the normalized transition dipole moment to the dominant state, which forces the hyperpolarizability to be dominated by only two excited states and (2) the energy ratio between the two dominant states. All optimized potentials are found to obey the three-level ansatz to within about 1%. Many of these potential energy functions may be implementable in multiple quantum well structures. The subset of potentials with undulations reaffirm that modulation of conjugation may be an approach for making better organic molecules, though there appear to be many others. Additionally, our results suggest that one-dimensional molecules may have larger diagonal intrinsic hyperpolarizability {beta}{sub xxx}{sup int} than higher-dimensional systems.

  11. Process Development for Stamping Á-Pillar Covers with Aluminum

    SciTech Connect (OSTI)

    Choi, Jung-Pyung; Rohatgi, Aashish; Smith, Mark T.; Lavender, Curt A.

    2015-02-20

    In this work, performed in close collaboration with PACCAR and Magna International, a 6XXX series aluminum alloy was used for the development of A-Pillar cover for the cab of a typical heavy-duty Class-8 truck. The use of Al alloy for the A-pillar cover represents an approximately 40% weight savings over its steel or molded fiberglass composite counterpart. For the selected Al alloy, a small amount of cold work (5% tensile strain), following prior hot-forming, was found to significantly improve the subsequent age-hardening response. The role of solutionizing temperature and rate of cooling on the age-hardening response after paint-bake treatment were investigated. For the temperature range selected in this work, higher solutionizing temperature correlated with greater subsequent age-hardening and vice-versa. However, the age-hardening response was insensitive to the mode of cooling (water quench vs. air cooling). Finally, a two-step forming process was developed where, in the first step, the blank was heated to solutionizing temperature, quenched, and then partially formed at room temperature. For the second step, the pre-form was re-heated and quenched as in the first step, and the forming was completed at room temperature. The resulting A-pillars had sufficient residual ductility to be compatible with hemming and riveting

  12. Hydrogen File Capture v1.0.DLL

    Energy Science and Technology Software Center (OSTI)

    2006-03-28

    Postprocessor for the use with GoldSim commercial software. The program is intended as a DLL for use with a GoldSim model simulation to copy input/output files created during the simulation to a central location on a local LAN. The software is used as part of a modeling package that consists of GoldSim.exe and other external codes linked and executed during a GoldSim model simulation. The FileCapture_v1.0.DLL is used to run Monte Carlo analyses with amore » GoldSim simulation that is executed using the distributed processing module. When distributed processing (i.e., multi-processor run) is used for a GoldSim Model simulation that is comprised of one or more codes linked with the GoldSim.exe, it is sometimes necessary to capture the default input and/or output files generated by the external codes linked with the GoldSim.exe program. Using the input file "FileCapture.In' to list the filenames and path, FileCapture_v1.0.DLL copies the files listed in 'FileCapture.in' from each node on the LAN to a folder called 'FCAP Files' created in the location gie as the path. The DLL will execute for each realization and append 00xxx a number indication which realization the file was generated from.« less

  13. Accelerated molecular dynamics methods: introduction and recent developments

    SciTech Connect (OSTI)

    Uberuaga, Blas Pedro; Voter, Arthur F; Perez, Danny; Shim, Y; Amar, J G

    2009-01-01

    A long-standing limitation in the use of molecular dynamics (MD) simulation is that it can only be applied directly to processes that take place on very short timescales: nanoseconds if empirical potentials are employed, or picoseconds if we rely on electronic structure methods. Many processes of interest in chemistry, biochemistry, and materials science require study over microseconds and beyond, due either to the natural timescale for the evolution or to the duration of the experiment of interest. Ignoring the case of liquids xxx, the dynamics on these time scales is typically characterized by infrequent-event transitions, from state to state, usually involving an energy barrier. There is a long and venerable tradition in chemistry of using transition state theory (TST) [10, 19, 23] to directly compute rate constants for these kinds of activated processes. If needed dynamical corrections to the TST rate, and even quantum corrections, can be computed to achieve an accuracy suitable for the problem at hand. These rate constants then allow them to understand the system behavior on longer time scales than we can directly reach with MD. For complex systems with many reaction paths, the TST rates can be fed into a stochastic simulation procedure such as kinetic Monte Carlo xxx, and a direct simulation of the advance of the system through its possible states can be obtained in a probabilistically exact way. A problem that has become more evident in recent years, however, is that for many systems of interest there is a complexity that makes it difficult, if not impossible, to determine all the relevant reaction paths to which TST should be applied. This is a serious issue, as omitted transition pathways can have uncontrollable consequences on the simulated long-time kinetics. Over the last decade or so, we have been developing a new class of methods for treating the long-time dynamics in these complex, infrequent-event systems. Rather than trying to guess in advance what

  14. Crystal structure of a tetrameric GDP-D-mannose 4,6-dehydratase from a bacterial GDP-D-rhamnose biosynthetic pathway

    SciTech Connect (OSTI)

    Webb, N.A.; Mulichak, A.M.; Lam, J.S.; Rocchetta, H.L.; Garavito, R.M.

    2010-03-08

    D-Rhamnose is a rare 6-deoxy monosaccharide primarily found in the lipopolysaccharide of pathogenic bacteria, where it is involved in host-bacterium interactions and the establishment of infection. The biosynthesis of D-rhamnose proceeds through the conversion of GDP-D-mannose by GDP-D-mannose 4,6-dehydratase (GMD) to GDP-4-keto-6-deoxymannose, which is subsequently reduced to GDP-D-rhamnose by a reductase. We have determined the crystal structure of GMD from Pseudomonas aeruginosa in complex with NADPH and GDP. GMD belongs to the NDP-sugar modifying subfamily of the short-chain dehydrogenase/reductase (SDR) enzymes, all of which exhibit bidomain structures and a conserved catalytic triad (Tyr-XXX-Lys and Ser/Thr). Although most members of this enzyme subfamily display homodimeric structures, this bacterial GMD forms a tetramer in the same fashion as the plant MUR1 from Arabidopsis thaliana. The cofactor binding sites are adjoined across the tetramer interface, which brings the adenosyl phosphate moieties of the adjacent NADPH molecules to within 7 {angstrom} of each other. A short peptide segment (Arg35-Arg43) stretches into the neighboring monomer, making not only protein-protein interactions but also hydrogen bonding interactions with the neighboring cofactor. The interface hydrogen bonds made by the Arg35-Arg43 segment are generally conserved in GMD and MUR1, and the interacting residues are highly conserved among the sequences of bacterial and eukaryotic GMDs. Outside of the Arg35-Arg43 segment, residues involved in tetrameric contacts are also quite conserved across different species. These observations suggest that a tetramer is the preferred, and perhaps functionally relevant, oligomeric state for most bacterial and eukaryotic GMDs.

  15. Mill Designed Bio bleaching Technologies

    SciTech Connect (OSTI)

    Institute of Paper Science Technology

    2004-01-30

    generation of laccase has a broad spectrum of operating parameters. Nonetheless, the development of future genetically engineered laccases with enhanced temperature, pH and redox potentials will dramatically improve the overall process. A second challenge for LMS bleaching technologies is the need to develop effective, catalytic mediators. From the literature we already know this is feasible since ABTS and some inorganic mediators are catalytic. Unfortunately, the mediators that exhibit catalytic properties do not exhibit significant delignification properties and this is a challenge for future research studies. Potential short-term mill application of laccase has been recently reported by Felby132 and Chandra133 as they have demonstrated that the physical properties of linerboard can be improved when exposed to laccase without a chemical mediator. In addition, xxx has shown that the addition of laccase to the whitewater of the paper machine has several benefits for the removal of colloidal materials. Finally, this research program has presented important features on the delignification chemistry of LMS{sub NHA} and LMS{sub VA} that, in the opinion of the author, are momentous contributions to the overall LMS chemistry/biochemistry knowledge base which will continue to have future benefits.