National Library of Energy BETA

Sample records for writing ingrid kolb

  1. Ingrid Kolb

    Broader source: Energy.gov [DOE]

    Ingrid Kolb was appointed Director of the Office of Management on December 1, 2005. As the Director she leads an organization comprised of nearly 260 employees with a budget of $55 million. The...

  2. TO: INGRID KOLB

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (NOTE: Per Office of the Executive Secretariat procedures, please use Calibri, 12 point font for this action memorandum) TO: INGRID KOLB DIRECTOR OFFICE OF MANAGEMENT FROM: SECRETARIAL OFFICER'S NAME TITLE SUBJECT: DIRECTIVES CERTIFICATION STATEMENT DOE (number, title, dated xx-xx-xx) has been reviewed by my organization and deemed to be in compliance with related Departmental Directives, Secretarial Delegations, organizational structure, budget guidelines, regulations, standards, OMB guidance,

  3. Ingrid Ann Christner Kolb | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ingrid Ann Christner Kolb About Us Ingrid Ann Christner Kolb - Director, Office of Management Career Highlights Deputy Director, Office of Management, U.S. Department of Energy Chief of Staff, Associate Deputy Secretary, U.S. Department of Energy Chief of Staff, Chief Financial Officer, U.S. Department of Homeland Security (DHS). Chief of Staff, Budget and Evaluation/Chief Financial Officer, Office of Management, U.S. Department of Energy Acting Deputy Director, Demand Reduction, Office of

  4. MEMORANDUM FOR: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT THROUGH: KEVIN T. HAGERTYDIRECTOR, OFFICE OF INFORMATION RESOURCES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective May 2012) MEMORANDUM FOR: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT THROUGH: KEVIN T. HAGERTYDIRECTOR, OFFICE OF INFORMATION RESOURCES FROM: XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX SUBJECT: Request to Reactivate Directive Currently On Hold PURPOSE: The purpose of this memorandum is to request the Directives Review Board (DRB)'s

  5. INGRID

    SciTech Connect (OSTI)

    Christon, M.A.; Dovey, D.; Stillman, D.W.; Hallquist, J.O.; Rainsberger, R.B. )

    1992-09-01

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  6. Ingrid Milton

    Office of Energy Efficiency and Renewable Energy (EERE)

    Ingrid Milton currently is on detail to the Office Technology Transitions. She has served as a Technology Transfer Advisor for the Department of Energy Under Deputy of Science and Energy on two...

  7. Acquisition and Project Management Awards Presentations - Ingrid Kolb,

    Office of Environmental Management (EM)

    3-04 Acquisition Letter No. AL 2013-04 AL 2013-04.pdf (58.37 KB) More Documents & Publications Department of Energy Acquisition Letter 2013-04 on Executive Compensation Acquisition Letter No. AL 2014-07 Acquisition Letter 07 - Benchmark Compensation Amount for Individual Executive Salary Actions and Operating Contracts | Department of Energy

    on Acquisition Planning Considerations for Management and Operating Contracts Acquisition Letter on Acquisition Planning Considerations for

  8. Ingrid Kolb, Director, Office of Management Section I: Steps...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... For example, visitors can enter a search term and find that information on Energy.gov. ... Backlog reduction is measured both in terms of numbers of backlogged requests or ...

  9. Women @ Energy: Ingrid Repins

    Broader source: Energy.gov [DOE]

    "I feel so lucky that every day I get to work on a problem that is socially important and uses my training and skills in science. I love to be working with other people who are excited about science – and on top of all of that, I get paid for it. Twenty years ago I never would have thought that I could have a career in photovoltaics, but it has grown by factors of ten in my lifetime." Read more from Ingrid on her profile here.

  10. 4-23-13_Ingrid_Kolb FT SENR_0.pdf

    Office of Environmental Management (EM)

  11. INGRID; 3-D Mesh Generation Nonlinear Systems

    SciTech Connect (OSTI)

    Stillman, D.W.; Rainsberger, R.

    1985-07-01

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  12. INGRID. 3-D Mesh Generation Nonlinear Systems

    SciTech Connect (OSTI)

    Christon, M.A.; Dovey, D.; Stillman, D.W.; Hallquist, J.O.; Rainsberger, R.B.

    1992-09-01

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  13. INGRID. 3-D Mesh Generation Nonlinear Systems

    SciTech Connect (OSTI)

    Stillman, D.W.; Rainsberger, R.

    1985-07-01

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D (ESTSC. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  14. INGRID. 3-D Mesh Generation Nonlinear Systems

    SciTech Connect (OSTI)

    Stillman, D.W.; Rainsberger, R.

    1985-07-01

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  15. Federal Project Director of the Year for 2011 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Phillip Kraushaar; Johnny Moore; Daniel Lehman; Ingrid Kolb (from left to right) Daniel Poneman; David Arakawa; Phillip Kraushaar; Johnny Moore; Daniel Lehman; Ingrid Kolb ...

  16. SSC: They All Did It Adrienne W. Kolb

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mysterious Death of the SSC: They All Did It Adrienne W. Kolb Fermilab June 1, 2016 4:00 p.m. - Wilson Hall, One West The Superconducting Super Collider (SSC) was planned to be an energy- frontier accelerator that would keep the US at the forefront of high-energy physics. Originally imagined as an international "accelerator for world peace" in the 1960s, it was finally born as a US project in 1983. It went from concept through design and development, only to suffer a premature death in

  17. INGRID: a three-dimensional mesh generator for modeling nonlinear systems

    SciTech Connect (OSTI)

    Stillman, D.W.; Hallquist, J.O.

    1985-07-01

    INGRID generates complete input files for the codes DYNA3D, NIKE3D, FACET, and TOPAZ3D. Geometries are described primarily using index space concepts which came from the program INGEN. The ideas used in INGEN were reworked into a new method which is both simple and powerful. Interactive graphics in INGRID are patterned after TAURUS, a three-dimensional post-processor, and MAZE, a two-dimensional mesh generator. Much of the coding from MAZE is directly incorporated in INGRID.

  18. [Agency Name]

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plain Writing Compliance Report | page 1 I. SENIOR AGENCY OFFICIAL FOR PLAIN WRITING Senior Official for Plain Writing: Ingrid Kolb Director, Office of Management Plain Writing Implementation Contact: Michael Coogan Office of the Executive Secretariat II. TO DATE, DEPARTMENT OF ENERGY (DOE) COMMUNICATIONS RELEASED IN PLAIN LANGUAGE * DOE website overhaul includes a focus on Plain Writing, geared toward the public and DOE employees. * DOE Powerpedia Page (DOE's internal Wikipedia site) shares

  19. [Agency Name]

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3, 2012 1. Introduction The Department of Energy sees the implementation of the Plain Writing Act as an important initiative that helps the Department share relevant information in a way that is clear, concise, and informative. The areas referenced in this report are only a few of the successes we have encountered as we continue to implement the Act. 1. Departmental Plain Writing Officials 2. Ingrid Kolb, Director of the Office of Management, Senior Agency Official Responsible for Plain Writing

  20. [Agency Name]

    Broader source: Energy.gov (indexed) [DOE]

    4, 2014 1. Introduction The Department of Energy (DOE) sees the implementation of the Plain Writing Act as an important initiative that helps the Department share relevant information in a way that is clear, concise, and informative. The areas referenced in this report summarize some of our successes - particularly in providing Plain Language Training to employees and contractors (Part VI) - as we continue to implement the Act. 1. Departmental Plain Writing Officials 2. Ingrid Kolb, Director of

  1. | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    5, 2015 1. Introduction The Department of Energy (DOE) sees the implementation of the Plain Writing Act as an important initiative that helps the Department share relevant information in a way that is clear, concise, and informative. The areas referenced in this report summarize some of our successes - particularly in providing Plain Language Training to employees and contractors (Part VI) - as we continue to implement the Act. 1. Departmental Plain Writing Officials 2. Ingrid Kolb, Director of

  2. DYNA3D, INGRID, and TAURUS: an integrated, interactive software system for crashworthiness engineering

    SciTech Connect (OSTI)

    Benson, D.J.; Hallquist, J.O.; Stillman, D.W.

    1985-04-01

    Crashworthiness engineering has always been a high priority at Lawrence Livermore National Laboratory because of its role in the safe transport of radioactive material for the nuclear power industry and military. As a result, the authors have developed an integrated, interactive set of finite element programs for crashworthiness analysis. The heart of the system is DYNA3D, an explicit, fully vectorized, large deformation structural dynamics code. DYNA3D has the following four capabilities that are critical for the efficient and accurate analysis of crashes: (1) fully nonlinear solid, shell, and beam elements for representing a structure, (2) a broad range of constitutive models for representing the materials, (3) sophisticated contact algorithms for the impact interactions, and (4) a rigid body capability to represent the bodies away from the impact zones at a greatly reduced cost without sacrificing any accuracy in the momentum calculations. To generate the large and complex data files for DYNA3D, INGRID, a general purpose mesh generator, is used. It runs on everything from IBM PCs to CRAYS, and can generate 1000 nodes/minute on a PC. With its efficient hidden line algorithms and many options for specifying geometry, INGRID also doubles as a geometric modeller. TAURUS, an interactive post processor, is used to display DYNA3D output. In addition to the standard monochrome hidden line display, time history plotting, and contouring, TAURUS generates interactive color displays on 8 color video screens by plotting color bands superimposed on the mesh which indicate the value of the state variables. For higher quality color output, graphic output files may be sent to the DICOMED film recorders. We have found that color is every bit as important as hidden line removal in aiding the analyst in understanding his results. In this paper the basic methodologies of the programs are presented along with several crashworthiness calculations.

  3. Leadership | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leadership Leadership Ingrid Ann Christner Kolb Photo of Ingrid Kolb Director, Office of Management Ingrid Kolb was appointed Director of the Office of Management on December 1, 2005. As the Director she leads an organization comprised of nearly 260 employees with a budget of $55 million. The Office of Management (MA) is the Department of Energy's central management organization providing leadership in such mission critical areas as project and acquisition management. MA also provides direction

  4. Leading experts to speak at battery & energy storage technology conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Leadership Leadership Ingrid Ann Christner Kolb Photo of Ingrid Kolb Director, Office of Management Ingrid Kolb was appointed Director of the Office of Management on December 1, 2005. As the Director she leads an organization comprised of nearly 260 employees with a budget of $55 million. The Office of Management (MA) is the Department of Energy's central management organization providing leadership in such mission critical areas as project and acquisition management. MA also provides direction

  5. Directives Review Board - DOE Directives, Delegations, and Requirement...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Review Board by Website Administrator Members Organizations Represented Ingrid Kolb, Chair Office of Management Office of International Affairs Office of Energy Policy and...

  6. SAMPLE CANCELLATION MEMORANDUM FOR NNSA ELEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office name, primary contact for this directive and telephone number.) Ingrid Kolb, Director, Office of Management (MA-1): Concur: Nonconcur: Date: Cynthia A. Lersten,...

  7. SAMPLE MEMORANDUM FOR NON NNSA ELEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office name, primary contact for this directive and telephone number.) Ingrid Kolb, Director, Office of Management (MA-1): Concur: Nonconcur: Date: XXXXXXXXXXX, Associate...

  8. THE WHITE HOUSE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DAVID M. KLAUS DEPUTY UNDER SECRETARY FOR MANAGEMENT AND PERFORMANCE THROUGH: INGRID KOLB DIRECTOR OFFICE OF MANAGEMENT FROM: NAME ORGANIZATION SUBJECT: Provide the action you...

  9. SAMPLE CANCELLATION MEMORANDUM FOR NNSA ELEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    please use Calibri, 12 point font for this action memorandum) MEMORANDUM FOR: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT THROUGH: KEVIN T. HAGERTY DIRECTOR, OFFICE OF...

  10. Before the Senate Homeland Security and Governmental Affairs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Before the Senate Homeland Security and Governmental Affairs Subcommittee on Contracting Oversight By: Ingrid Kolb, Director Office of Management Subject: Improving Federal ...

  11. Before the House Subcommittee on National Parks Committee on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Parks Committee on Energy and Commerce Before the House Subcommittee on National Parks Committee on Energy and Commerce Testimony of Ingrid Kolb, Director Office of ...

  12. Business Writing

    Broader source: Energy.gov [DOE]

    Couse Description: Most professionals are required to write as part of their job, but often find drafting writing and editing documents time-consuming and frustrating.  The overriding goal of this...

  13. Web Writing

    Office of Energy Efficiency and Renewable Energy (EERE)

    EERE has requirements and best practices to help you write Web content that's accessible, easier to find, and easier to read.

  14. Index of /documents/public/ScientificWriting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ScientificWriting

  15. Microsoft Word - 6.27.12 MA Final Testimony

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PARKS COMMITTEE ON ENERGY AND NATURAL RESOURCES U.S. SENATE JUNE 27, 2012 Mr. Chairman and Members of the Subcommittee, my name is Ingrid Kolb. I serve as the Director, Office of ...

  16. EXEC-2010-017867 MEMORANDUM FOR CATHERINE R. ZOI ) Jj,J?- ACTING...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DC 20585 Janunry 11, 20 I 1 EXEC-2010-017867 MEMORANDUM FOR CATHERINE R. ZOI ) Jj,J?- ACTING UNDER SECRETARY OF ENERGY - * INGRID KOLB, DIRE;TOR, OFFICE T PETER...

  17. Before the Subcommittee on National Parks - Senate Committee on Energy and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Natural Resources | Department of Energy National Parks - Senate Committee on Energy and Natural Resources Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources Testimony of Ingrid Kolb, Director, Office of Management Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources 4-23-13_Ingrid_Kolb FT SENR (141.28 KB) More Documents & Publications Before the House Subcommittee on National Parks Committee on Energy and

  18. Secretary's Achievement Award (SING) | Department of Energy

    Office of Environmental Management (EM)

    SING) Secretary's Achievement Award (SING) (from left to right) Daniel Poneman; David Arakawa; Barbara Thibadeau; Phillip Kraushaar; Daniel Lehman; Ingrid Kolb (from left to right) Daniel Poneman; David Arakawa; Barbara Thibadeau; Phillip Kraushaar; Daniel Lehman; Ingrid Kolb Presented to: The Office of Science's Spallation Neutron Source Instruments - Next Generation (SING) Project The SING team capitalized on the technical and managerial efficiency gained by combining the five instruments into

  19. Secretary's Award of Excellence | Department of Energy

    Office of Environmental Management (EM)

    Award of Excellence Secretary's Award of Excellence (from left to right) Daniel Poneman; Chad Henderson; Jeff Pitman; Marc Jones; Daniel Lehman; Ingrid Kolb (from left to right) Daniel Poneman; Chad Henderson; Jeff Pitman; Marc Jones; Daniel Lehman; Ingrid Kolb Presented to: The Office of Science's Physical Sciences Facility (PSF) Project For demonstrating exceptional results in completing this complex $224 million project. The Pacific Northwest National Laboratory (PNNL) was facing the loss of

  20. Secretary's Improvement Award | Department of Energy

    Office of Environmental Management (EM)

    Improvement Award Secretary's Improvement Award (from left to right) Johnny Moore; Daniel Poneman; Gordon Fox; Marcus Jones; Daniel Lehman; Gary Bloom; Ingrid Kolb (from left to right) Johnny Moore; Daniel Poneman; Gordon Fox; Marcus Jones; Daniel Lehman; Gary Bloom; Ingrid Kolb Presented to: The Office of Science's Modernization of Laboratory Facilities (MLF) The MLF team successfully used the "Construction Manager at Risk" acquisition strategy at Oak Ridge National Laboratory. This

  1. Inherently Risky Design?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ingrid Ann Christner Kolb About Us Ingrid Ann Christner Kolb - Director, Office of Management Career Highlights Deputy Director, Office of Management, U.S. Department of Energy Chief of Staff, Associate Deputy Secretary, U.S. Department of Energy Chief of Staff, Chief Financial Officer, U.S. Department of Homeland Security (DHS). Chief of Staff, Budget and Evaluation/Chief Financial Officer, Office of Management, U.S. Department of Energy Acting Deputy Director, Demand Reduction, Office of

  2. Women @ Energy: Ingrid Fang

    Broader source: Energy.gov [DOE]

    "It was hard at the beginning. Most of my professors thought I walked into the wrong classroom. It was my rigorous ballet training that made me realize that I can do anything as long as I work hard on it. I knew that if I could train myself to stand en pointe in my ballet shoes, there was nothing I could not do."

  3. SPONAP Grant Writing Essentials

    Broader source: Energy.gov [DOE]

    HUD's Southern Plains Office of Native American Programs in collaboration with the Seminole Tribe of Florida Native Learning Center invites you to attend the Grant Writing Essentials training...

  4. HUD Grant Writing Workshop

    Broader source: Energy.gov [DOE]

    The U.S. Department of Housing and Urban Development’s (HUD's) Utah Office is offering a free two-day grant writing workshop at the Salt Lake City Library. This workshop is intended to assist with...

  5. Writing Performance Objectives

    Broader source: Energy.gov [DOE]

    Couse Description: This course provides the opportunity for supervisors and managers to write performance objectives or performance standards based on the department’s performance management system.

  6. Web Writing Best Practices

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to Web writing requirements, follow these best practices to help you create user friendly content for Office of Energy Efficiency and Renewable Energy (EERE) websites and applications.

  7. EIA Writing Style Guide

    Gasoline and Diesel Fuel Update (EIA)

    Writing Style Guide April 2015 U.S. Energy Information Administration Office of Communications This publication is available on the EIA employee intranet and at: www.eia.gov/eiawritingstyleguide.pdf U.S. government publications are not subject to copyright protection, but you should acknowledge EIA as the source if you use or reproduce this content. Contents Introduction to the EIA Writing Style Guide ........................................................................ Chapter 1: Editorial

  8. The Environmental Style: Writing Environmental Assessments and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Environmental Style: Writing Environmental Assessments and Impact Statements The Environmental Style: Writing Environmental Assessments and Impact Statements A writing guide ...

  9. Plain Writing Implementation Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plain Writing Implementation Plan Plain Writing Implementation Plan Plain Writing Implementation Plan July 13, 2011.pdf (120.01 KB) More Documents & Publications Plain Language Compliance Report (2012) PLAIN LANGUAGE COMPLIANCE REPORT (2013) Plain Language Compliance Report (2014

  10. The Environmental Style: Writing Environmental Assessments and...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Environmental Style: Writing Environmental Assessments and Impact Statements (DOE, 2005) The Environmental Style: Writing Environmental Assessments and Impact Statements (DOE, ...

  11. Web Writing Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Web Writing Requirements When writing content for Office of Energy Efficiency and Renewable Energy (EERE) websites and applications, follow these requirements. Also see EERE's Web ...

  12. Testimony Before the House Appropriations Subcommittee on Energy and Water

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development | Department of Energy House Appropriations Subcommittee on Energy and Water Development Testimony Before the House Appropriations Subcommittee on Energy and Water Development Testimony Before the House Appropriations Subcommittee on Energy and Water Development By: Ingrid Kolb, Director, Office of Management Subject: Energy Department Project Oversight 3-5-09_Final_Testimony_(Kolb).pdf (25.32 KB) More Documents & Publications Before the Subcommittee on National Parks -

  13. Certification of DOE Reading Rooms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certification of DOE Reading Rooms Certification of DOE Reading Rooms Certification of DOE Reading Rooms by Ingrid Kolb, Chief FOIA Officer, October, 17, 2008. (57.79 KB) More Documents & Publications Memorandum from Secretary Moniz on the Freedom of Information Act (FOIA) Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources DRAFT 2012 DOE Project Management Workshop Agenda

  14. Secretary's 2014 Award for Project Management Improvement | Department of

    Office of Environmental Management (EM)

    Energy for Project Management Improvement Secretary's 2014 Award for Project Management Improvement Nuclear Materials Safeguards & Security Upgrades (NMSSUP) Project (The National Nuclear Security Administration) (855.47 KB) More Documents & Publications 2014 Awards for Project Management Secretary's 2014 Achievement Awards Acquisition and Project Management Awards Presentations - Ingrid Kolb, Director, Office of Management

  15. Secretary's 2014 Award of Excellence | Department of Energy

    Office of Environmental Management (EM)

    of Excellence Secretary's 2014 Award of Excellence Numi Off-axis electron neutrino (νe) Appearance (NOνA) Project (Office of Science) (810.89 KB) More Documents & Publications 2014 Awards for Project Management Acquisition and Project Management Awards Presentations - Ingrid Kolb, Director, Office of Management Secretary's 2013 Achievement Awards

  16. Easing the pain of grant writing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... science, technology, engineering, or math education. Future issues of Connections will include postings and emails for grant opportunities and feature a monthly grant-writing tip

  17. Native Services Grant Writing 101 Webinar

    Broader source: Energy.gov [DOE]

    The Native Learning Center will host a "Grant Writing 101" webinar to gain an introduction to the grant writing process. Speaker Charmagne Dolphin of Seven Sisters Community Development Group will cover strategies to assess their funding needs and research techniques to identify appropriate funding sources.

  18. Web Writing Requirements and Best Practices | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Web Writing Requirements and Best Practices Web Writing Requirements and Best Practices The Office of Energy Efficiency and Renewable Energy (EERE) has requirements and best ...

  19. Acquisition and Project Management Awards Presentations - Ingrid...

    Broader source: Energy.gov (indexed) [DOE]

    Secretary's Achievement Award Seismic Life-Safety, Modernization & Replacement (Seismic Ph 2)Secretary's Award for Project Management Improvement Nuclear Materials Safeguards & ...

  20. Ingrid Archibald | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Administration | (NNSA) Home / content Infrastructure and Facilities Management NNSA restores, rebuilds, and revitalizes the physical infrastructure of the nuclear weapons complex to ensure the vitality and readiness of the NNSA's nuclear security enterprise. Mission execution is built upon management of the Facilities and Infrastructure Recapitalization Program (FIRP) that includes reduction of the maintenance backlog of old facilities, reduction of excess facilities and utility

  1. Carbon nanotube formation by laser direct writing

    SciTech Connect (OSTI)

    Wu, Y.-T.; Su, H.-C.; Tsai, C.-M.; Liu, K.-L.; Chen, G.-D.; Huang, R.-H.; Yew, T.-R.

    2008-07-14

    This letter presents carbon nanotube (CNT) formation by laser direct writing using 248 nm KrF excimer pulsed laser in air at room temperature, which was applied to irradiate amorphous carbon (a-C) assisted by Ni catalysts underneath for the transformation of carbon species into CNTs. The CNTs were synthesized under appropriate combination of laser energy density and a-C thickness. The growth mechanism and key parameters to determine the success of CNT formation were also discussed. The demonstration of the CNT growth by laser direct writing in air at room temperature opens an opportunity of in-position CNT formation at low temperatures.

  2. V-174: RSA Authentication Manager Writes Operating System, SNMP...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: RSA Authentication Manager Writes Operating System, SNMP, and HTTP Plug-in Proxy Passwords in Clear Text to Log Files V-174: RSA Authentication Manager Writes Operating System,...

  3. FOIA Contacts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Contacts FOIA Contacts FOIA REQUESTER SERVICE CENTERS, FOIA PUBLIC LIASONS, AND FOIA OFFICERS DOE Headquarters (HQ) FOIA Requester Service Center 1000 Independence Avenue, SW Washington, DC 20585 Phone: 202-586-5955 Fax: 202-586-0575 FOIA Web Page: http://energy.gov/management/office-management/operational-management/freedom-information-act Ingrid A. Kolb Chief FOIA Officer Kevin T. Hagerty FOIA Public Liaison Phone: 202-586-5955 Alexander C. Morris FOIA Officer Phone: 202-586-3159 Poli A.

  4. THE WHITE HOUSE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DIRECTIVES APPROVAL MEMORANDUM Actions Approved by the Director, MA-1 (Effective: November 18, 2010 - Supersedes May 14, 2010 version) NOTE: This action memorandum is used to request approval of a new or revised Guide or cancellation of an existing Guide. Please use Calibri 12 point font, the standard for Action Memoranda. (THIS TEMPLATE APPLIES TO GUIDES.) MEMORANDUM FOR INGRID KOLB DIRECTOR OFFICE OF MANAGEMENT THROUGH: KEVIN T. HAGERTY DIRECTOR OFFICE OF INFORMATION RESOURCES FROM: [INSERT

  5. Microsoft Word - 9.15.16 Speaker Biographies

    Office of Environmental Management (EM)

    PARKS COMMITTEE ON ENERGY AND NATURAL RESOURCES U.S. SENATE JUNE 27, 2012 Mr. Chairman and Members of the Subcommittee, my name is Ingrid Kolb. I serve as the Director, Office of Management at the U.S. Department of Energy. As part of our programmatic responsibilities, the Office of Management coordinates cultural resources and historic preservation activities across the Department and is the lead office coordinating DOE participation in the proposed Manhattan Project National Historical Park. I

  6. Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sample Memorandum to Reactivate a Directive Placed on Hold (NOTE: Per Office of Executive Secretariat procedures, please use Calibri, 12 point font for this memorandum.) (Effective April 2014) MEMORANDUM FOR: XXXXXXXXXXXXXXXX ASSOCIATE ADMINISTRATOR FOR MANAGEMENT AND BUDGET THROUGH: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT FROM: XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX SUBJECT: Request to Reactivate Directive Currently on Hold PURPOSE: The purpose of this memorandum is to request the Directives

  7. Before the House Subcommittee on National Parks Committee on Energy and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commerce | Department of Energy National Parks Committee on Energy and Commerce Before the House Subcommittee on National Parks Committee on Energy and Commerce Testimony of Ingrid Kolb, Director Office of Management Before the House Subcommittee on National Parks - Committee on Energy and Commerce Microsoft Word - 6.27.12 MA Final Testimony (11.87 KB) More Documents & Publications Before the House Subcommittee on National Parks, Forests and Public Lands - Committee on Natural Resources

  8. Before the Senate Homeland Security and Governmental Affairs Subcommittee

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Contracting Oversight | Department of Energy Homeland Security and Governmental Affairs Subcommittee on Contracting Oversight Before the Senate Homeland Security and Governmental Affairs Subcommittee on Contracting Oversight Before the Senate Homeland Security and Governmental Affairs Subcommittee on Contracting Oversight By: Ingrid Kolb, Director Office of Management Subject: Improving Federal Contract Auditing 02-01-2011 Final MA Testimony (16.97 KB) More Documents & Publications

  9. SAMPLE CANCELLATION MEMORANDUM FOR NNSA ELEMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SAMPLE JUSTIFICATION MEMORANDUM FOR CANCELLATIONS ONLY (NON-NNSA ELEMENTS) (NOTE: Per Office of the Executive Secretariat procedures, please use Calibri, 12 point font for this action memorandum) MEMORANDUM FOR: INGRID KOLB DIRECTOR, OFFICE OF MANAGEMENT THROUGH: KEVIN T. HAGERTY DIRECTOR, OFFICE OF INFORMATION RESOURCES FROM: XXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXX SUBJECT: Request to Cancel (enter directive number and title) PURPOSE: (Provide purpose for cancellation. Writer may provide background

  10. MA Org Chart, June 2 Rev. 1, 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MA-1 Ingrid Kolb, Director Laurie Morman, Chief of Staff Office of Resource Management and Planning MA-1.1 Marilyn Dillon, Director Sandra Hersh, Dep. Director Office of Scheduling and Advance Charles Quintero, Director MA-10 MA-70 Office of Executive Secretariat Amy B. Demagistris, Director Office of Policy Analysis Michael Coogan Office of Correspondence Management Steven Johnsen MA-72 Administration, MIS, and Executive Commitments Group Shena Kennerly MA-74 Office of History and Archives

  11. Microsoft Word - 6.28.12 MA Final Testimony

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PARKS, FORESTS AND PUBLIC LANDS COMMITTEE ON NATURAL RESOURCES U.S. HOUSE OF REPRESENTATIVES JUNE 28, 2012 Mr. Chairman and Members of the Subcommittee, my name is Ingrid Kolb. I serve as the Director, Office of Management at the U.S. Department of Energy. As part of our programmatic responsibilities, the Office of Management coordinates cultural resources and historic preservation activities across the Department and is the lead office coordinating DOE participation in the proposed Manhattan

  12. Before the House Subcommittee on National Parks, Forests and Public Lands -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Committee on Natural Resources | Department of Energy Subcommittee on National Parks, Forests and Public Lands - Committee on Natural Resources Before the House Subcommittee on National Parks, Forests and Public Lands - Committee on Natural Resources Before the House Subcommittee on National Parks, Forests and Public Lands - Committee on Natural Resources By: Ingrid Kolb, Director Office of Management Subject: Proposed Manhattan Project National Historical Park Microsoft Word - 6.28.12 MA

  13. About Us | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Us About Us The Office of Management (MA) is the Department of Energy's central management organization providing leadership in such mission critical areas as project and acquisition management. In addition, MA manages the Department's Headquarters complex and provides administrative support to employees in the Washington, DC area. Ingrid Kolb, as the Director of the Office of Management, oversees more than $22 billion in annual contract obligations and $2 billion in financial assistance

  14. 2015 Chief Freedom of Information Act (FOIA) Officer Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2015 Chief Freedom of Information Act (FOIA) Officer Report Ingrid Kolb, Director, Office of Management Section I: Steps Taken to Apply the Presumption of Openness The guiding principle underlying the President's FOIA Memorandum and the Attorney General's FOIA Guidelines is the presumption of openness. Describe the steps your agency has taken to ensure that the presumption of openness is being applied to all decisions involving the FOIA. To do so, you should answer the questions listed below and

  15. Secretary's 2014 Achievement Awards | Department of Energy

    Office of Environmental Management (EM)

    Seismic Life-Safety, Modernization, and Replacement of General Purpose Buildings, Phase 2 Project (Office of Science) (975.52 KB) More Documents & Publications 2014 Awards for Project Management Acquisition and Project Management Awards Presentations - Ingrid Kolb, Director, Office of Management Secretary's 2013 Achievement Awards

    Security Improvements Project (The National Nuclear Security Administration) (819.59 KB) More Documents & Publications Secretary's 2014 Award for Project

  16. DOE Chief FOIA Officer Report for FY 2011

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Ingrid A.C. Kolb, Director, Office of Management I. Steps Taken to Apply the Presumption of Openness 1. Did your agency hold an agency FOIA conference, or otherwise conduct training during this reporting period? The agency did not conduct an agency wide FOIA conference. However training was provided to DOE field employees with FOIA responsibilities at the American Society of Access Professionals (ASAP) National Training in Las Vegas, March 2011. The Department of Justice (DOJ) Office of

  17. DOE Chief FOIA Officer Report for FY 2012

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Ingrid A.C. Kolb, Director, Office of Management I. Steps Taken to Apply the Presumption of Openness 1. Did your agency hold an agency FOIA conference, or otherwise conduct training during this reporting period? The agency did not conduct an agency wide FOIA conference. However, the Office of Hearings and Appeals in tandem with the FOIA Office conducted monthly training via conference calls for the field and Headquarters. The training covered a broad area of topics. The FOIA Office also

  18. Certified Federal Project Directors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Certification of DOE Reading Rooms Certification of DOE Reading Rooms Certification of DOE Reading Rooms by Ingrid Kolb, Chief FOIA Officer, October, 17, 2008. (57.79 KB) More Documents & Publications Memorandum from Secretary Moniz on the Freedom of Information Act (FOIA) Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources DRAFT 2012 DOE Project Management Workshop Agenda

    and Assurances for Use with SF-424 Certifications and Assurances for Use

  19. 02-01-2011 Final MA Testimony

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONTRACTING OVERSIGHT COMMITTEE ON HOMELAND SECURITY AND GOVERNMENTAL AFFAIRS U.S. SENATE FEBRUARY 1, 2011 Madam Chairman and Members of the Subcommittee, my name is Ingrid Kolb. I serve as the Director, Office of Management at the U.S. Department of Energy. I am pleased to be here today to discuss with you how the Department uses audit services to detect and prevent waste, fraud, and abuse in government contracts, to provide contracting officers reasonable assurance whether contractor

  20. Proposal Writing Guidelines and Scoring Criteria

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposal Writing Guidelines and Scoring Criteria Print Principal Investigator The proposal form asks for the names and contact information of the experiment leader completing the form and the Principal Investigator (PI). The PI is the leader and the individual responsible for the group, and the experiment leader is often the person completing the proposal form. In this way the ALS would like to encourage postdocs and students to gain experience in submitting proposals as the experiment leader,

  1. Features of Good Scientific Writing | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Features of Good Scientific Writing "Most of the fundamental ideas of science are essentially simple, and may, as a rule, be expressed in a language comprehensible to everyone." - Albert Einstein Striving for Clarity, Cohesion, and Conciseness Regardless of whether you are writing a lengthy report, a peer review, or an abstract, the objective of writing remains the same - to find the most direct path connecting your main message(s) to your reader. This path is shortest and most

  2. Plain Writing Act of 2010 for the Web | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Requirements Plain Writing Act of 2010 for the Web Plain Writing Act of 2010 for the Web The Plain Writing Act requires federal documents to be clear, concise, and ...

  3. Billboard: Watch what you write and say! | Y-12 National Security...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Watch what you ... Billboard: Watch what you write and say Your pen and tongue can be enemy weapons. Watch what you write and say...

  4. Direct write with microelectronic circuit fabrication

    DOE Patents [OSTI]

    Drummond, Timothy; Ginley, David

    1992-01-01

    In a process for deposition of material onto a substrate, for example, the deposition of metals or dielectrics onto a semiconductor laser, the material is deposited by providing a colloidal suspension of the material and directly writing the suspension onto the substrate surface by ink jet printing techniques. This procedure minimizes the handling requirements of the substrate during the deposition process and also minimizes the exchange of energy between the material to be deposited and the substrate at the interface. The deposited material is then resolved into a desired pattern, preferably by subjecting the deposit to a laser annealing step. The laser annealing step provides high resolution of the resultant pattern while minimizing the overall thermal load of the substrate and permitting precise control of interface chemistry and interdiffusion between the substrate and the deposit.

  5. Direct write with microelectronic circuit fabrication

    DOE Patents [OSTI]

    Drummond, T.; Ginley, D.

    1988-05-31

    In a process for deposition of material onto a substrate, for example, the deposition of metals for dielectrics onto a semiconductor laser, the material is deposited by providing a colloidal suspension of the material and directly writing the suspension onto the substrate surface by ink jet printing techniques. This procedure minimizes the handling requirements of the substrate during the deposition process and also minimizes the exchange of energy between the material to be deposited and the substrate at the interface. The deposited material is then resolved into a desired pattern, preferably by subjecting the deposit to a laser annealing step. The laser annealing step provides high resolution of the resultant pattern while minimizing the overall thermal load of the substrate and permitting precise control of interface chemistry and interdiffusion between the substrate and the deposit. 3 figs.

  6. 3-5-09_Final_Testimony_(Kolb).pdf

    Office of Environmental Management (EM)

    the 2007 Department of Energy Excellence Award in Project Management for constructing the 85 million LEED Gold certified Molecular Foundry Facility within cost and on schedule. ...

  7. EqualWrites: Reducing Intra-set Write Variations for Enhancing Lifetime of Non-volatile Caches

    SciTech Connect (OSTI)

    Mittal, Sparsh; Vetter, Jeffrey S.

    2015-01-29

    Driven by the trends of increasing core-count and bandwidth-wall problem, the size of last level caches (LLCs) has greatly increased and hence, the researchers have explored non-volatile memories (NVMs) which provide high density and consume low-leakage power. Since NVMs have low write-endurance and the existing cache management policies are write variation-unaware, effective wear-leveling techniques are required for achieving reasonable cache lifetimes using NVMs. We present EqualWrites, a technique for mitigating intra-set write variation. In this paper, our technique works by recording the number of writes on a block and changing the cache-block location of a hot data-item to redirect the future writes to a cold block to achieve wear-leveling. Simulation experiments have been performed using an x86-64 simulator and benchmarks from SPEC06 and HPC (high-performance computing) field. The results show that for single, dual and quad-core system configurations, EqualWrites improves cache lifetime by 6.31X, 8.74X and 10.54X, respectively. In addition, its implementation overhead is very small and it provides larger improvement in lifetime than three other intra-set wear-leveling techniques and a cache replacement policy.

  8. EqualWrites: Reducing Intra-set Write Variations for Enhancing Lifetime of Non-volatile Caches

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mittal, Sparsh; Vetter, Jeffrey S.

    2015-01-29

    Driven by the trends of increasing core-count and bandwidth-wall problem, the size of last level caches (LLCs) has greatly increased and hence, the researchers have explored non-volatile memories (NVMs) which provide high density and consume low-leakage power. Since NVMs have low write-endurance and the existing cache management policies are write variation-unaware, effective wear-leveling techniques are required for achieving reasonable cache lifetimes using NVMs. We present EqualWrites, a technique for mitigating intra-set write variation. In this paper, our technique works by recording the number of writes on a block and changing the cache-block location of a hot data-item to redirect themore » future writes to a cold block to achieve wear-leveling. Simulation experiments have been performed using an x86-64 simulator and benchmarks from SPEC06 and HPC (high-performance computing) field. The results show that for single, dual and quad-core system configurations, EqualWrites improves cache lifetime by 6.31X, 8.74X and 10.54X, respectively. In addition, its implementation overhead is very small and it provides larger improvement in lifetime than three other intra-set wear-leveling techniques and a cache replacement policy.« less

  9. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Z. Zhu, A. Scholl, J.D. Torrey, and M. Rolandi, "Serial and parallel Si, Ge, and SiGe direct-write with scanning probes and conductive stamps," Nano Lett. 11, 2386 (2011). ALS...

  10. Erratum: "'Water-cycle' mechanism for writing and erasingnanostructur...

    Office of Scientific and Technical Information (OSTI)

    Erratum: "'Water-cycle' mechanism for writing and erasing nanostructures at the LaAlO3SrTiO3 interface" Appl. Phys. Lett. 97, 173110 (2010) Citation Details In-Document Search ...

  11. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct-Write of Silicon and Germanium Nanostructures Direct-Write of Silicon and Germanium Nanostructures Print Wednesday, 29 June 2011 00:00 Nanostructured materials (nanowires, nanotubes, nanoclusters, graphene) are attractive possible alternatives to traditionally microfabricated silicon in continuing the miniaturization trend in the electronics industry. To go from nanomaterials to electronics, however, the precise one-by-one assembly of billions of nanoelements into a functioning circuit is

  12. Plain Language: A Commitment to Writing You Can Understand | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Plain Language: A Commitment to Writing You Can Understand Plain Language: A Commitment to Writing You Can Understand The Plain Writing Act of 2010 requires federal agencies to write "clear Government communication that the public can understand and use." President Obama also emphasized the importance of establishing "a system of transparency, public participation, and collaboration" in his January 21, 2009, Memorandum on Transparency and Open Government. We here

  13. NREL: Photovoltaics Research - Ingrid Repins, Ph.D.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "19.9%-efficient ZnOCdSCuInGaSe2 solar cell with 81.2% fill factor." Progress in Photovoltaics, 16 (3). http:dx.doi.org10.1002pip.822. Repins, I.L., Beall, C., Vora, N.,...

  14. Read/write head for a magnetic tape device having grooves for reducing tape floating

    DOE Patents [OSTI]

    Aoki, Kenji

    2005-08-09

    A read/write head for a magnetic tape includes an elongated chip assembly and a tape running surface formed in the longitudinal direction of the chip assembly. A pair of substantially spaced parallel read/write gap lines for supporting read/write elements extend longitudinally along the tape running surface of the chip assembly. Also, at least one groove is formed on the tape running surface on both sides of each of the read/write gap lines and extends substantially parallel to the read/write gap lines.

  15. Information Technology Project Execution Model Guide for Small and Medium Projects (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-09-21

    This draft has been scheduled for final review before the Directives Review Board on 10-1-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 9-29-15.

  16. Excepted Service Authority for Exceptionally Well Qualified (EWQ) EQ Pay Plan Employees (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-05

    This draft has been scheduled for final review before the Directives Review Board on 01/15/2015. All major comments and concerns should be provided to your DRB representative by 01/13/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  17. Administering Workforce Discipline (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  18. Facility Safety (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-12-04

    This draft has been scheduled for final review before the Directives Review Board on 12/18/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 12/16/2014.

  19. Insider Threat Program (For Informational Purposes)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-03-10

    This draft has been scheduled for final review before the Directives Review Board on 03/20/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 03/18/2014.

  20. Security and Use Control of Nuclear Explosives and Nuclear Weapons (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-02-24

    This draft has been scheduled for final review before the Directives Review Board on 3-5-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 3-3-15.

  1. FOIA Requests Received by the Carlsbad Field Office in 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Nuclear Security Administration | (NNSA) FOIA Requester Service Centers, FOIA Public Liaisons and Web Pages Department of Energy Office Requestor Service Center Public Liason Web Page DOE Headquarters 1000 Independence Avenue, SW Washington, DC 20585 p: 202-586-5955 f: 202-586-0575 Ingrid A. Kolb Chief FOIA Officer Kevin T. Hagerty FOIA Public Liaison p: 202-586-5955 Alexander C. Morris FOIA Officer p: 202-586-3159 Poli A. Marmolejos FOIA Appeals Officer Phone: 202-287-1400 DOE FOIA

  2. Strategic Partnership Projects [Formerly Known as Work for Others (Non Department of Energy Funded Work)] (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-10-23

    This draft has been scheduled for final review before the Directives Review Board on 11-4-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Emily Stanton (Emily.Stanton@hq.doe.gov; 202-287-5641). All major comments and concerns should be submitted by COB 11-2-15.

  3. Hazardous Materials Packaging and Transportation Safety (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-10-23

    This draft has been scheduled for final review before the Directives Review Board on 11-4-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 11-2-15.

  4. Asset Revitalization Guide for Asset Management and Reuse (For Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-29

    This draft has been scheduled for final review before the Directives Review Board on 6-18-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 6-17-15.

  5. Federal Sustainable Print Management (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-09-21

    This draft has been scheduled for final review before the Directives Review Board on 10-1-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 9-29-15.

  6. Nuclear Explosive and Weapon Surety Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-11-21

    This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

  7. Independent Oversight Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-07-29

    This draft has been scheduled for final review before the Directives Review Board on 8-6-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 8-5-15.

  8. Personal Property (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-26

    This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  9. Protection Program Operations (for Information Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-05-29

    This draft has been scheduled for final review before the Directives Review Board on 6-18-15. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 6-17-15.

  10. Implementation Guide for Developing Technical Safety Requirements (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-02-10

    This draft has been scheduled for final review before the Directives Review Board on 2/19/2015. All major comments and concerns should be provided to your DRB representative by 2/17/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

  11. 2012 Workshop Agenda_Ver_25.xlsx

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    START STOP DUR. (min.) TOPIC SPEAKER Tuesday, April 3 7:00 AM 8:00 AM 60 Workshop Registration 8:00 AM 8:05 AM 5 Welcome and Workshop Logistics John Makepeace, Office of Engineering and Construction Management 8:05 AM 8:20 AM 15 Opening Remarks Ingrid Kolb, Director, Office of Management 8:20 AM 8:40 AM 20 Achieving Management and Operational Excellence Melvin G. Williams, Associate Deputy Secretary 8:40 AM 8:55 AM 15 Break 8:55 AM 9:45 AM 50 Project Management Success: Are We There Yet? Paul

  12. Field Controlled Direct-Write Electrospinning | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Field Controlled Direct-Write Electrospinning Technology available for licensing: Electrospinning is rapidly becoming a popular technology with a myriad of applications in many different fields and industries. Fibers with a nano-scale width, or nanofibers, exhibit a high aspect ratio and provide a very large degree of anisotropy, which enhances energy transfer efficiency and other beneficial parameters in many technology fields, such as thermoelectric, photoelectric and RF/microwave

  13. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct-Write of Silicon and Germanium Nanostructures Print Nanostructured materials (nanowires, nanotubes, nanoclusters, graphene) are attractive possible alternatives to traditionally microfabricated silicon in continuing the miniaturization trend in the electronics industry. To go from nanomaterials to electronics, however, the precise one-by-one assembly of billions of nanoelements into a functioning circuit is required-clearly not a simple task. An interdisciplinary team from the University

  14. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct-Write of Silicon and Germanium Nanostructures Print Nanostructured materials (nanowires, nanotubes, nanoclusters, graphene) are attractive possible alternatives to traditionally microfabricated silicon in continuing the miniaturization trend in the electronics industry. To go from nanomaterials to electronics, however, the precise one-by-one assembly of billions of nanoelements into a functioning circuit is required-clearly not a simple task. An interdisciplinary team from the University

  15. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct-Write of Silicon and Germanium Nanostructures Print Nanostructured materials (nanowires, nanotubes, nanoclusters, graphene) are attractive possible alternatives to traditionally microfabricated silicon in continuing the miniaturization trend in the electronics industry. To go from nanomaterials to electronics, however, the precise one-by-one assembly of billions of nanoelements into a functioning circuit is required-clearly not a simple task. An interdisciplinary team from the University

  16. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct-Write of Silicon and Germanium Nanostructures Print Nanostructured materials (nanowires, nanotubes, nanoclusters, graphene) are attractive possible alternatives to traditionally microfabricated silicon in continuing the miniaturization trend in the electronics industry. To go from nanomaterials to electronics, however, the precise one-by-one assembly of billions of nanoelements into a functioning circuit is required-clearly not a simple task. An interdisciplinary team from the University

  17. Writing for a General Audience | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Additional Resources Communicating Science to Nonscientists, Stanford University lecture A 50-minute talk about the challenges of communicating to a general audience and strategies for scientists to overcome these challenges. The talk is delivered by Dr. Jean-Luc Doumont, an engineer with a Ph.D. in applied physics from Stanford University. Contact undergrad@anl.gov Writing a General Audience Abstract "[The scientist] must help in educating the public, in the broad sense, and this means

  18. LANSCE | Lujan Center | Tips for Writing Beamtime Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aaron Couture (acting) 505.667.1730 Deputy Leader Fredrik Tovesson 505.665.9652 Deputy Leader & Experimental Area Manager Charles Kelsey 505.665.5579 Experiment Coordinator Charles Kelsey (acting) 505.667.8755 User Program Administration lujan-uo@lanl.gov Administrative Assistant Julie Quintana-Valdez 505.665.5390 Department of Energy, National Nuclear Security Administration nnsa.energy.gov Tips for Writing Beamtime Proposals LANSCE User Resources Tips for a Successful Proposal Proposals

  19. Direct-Write Contacts: Metallization and Contact Formation; Preprint

    SciTech Connect (OSTI)

    van Hest, M. F. A. M.; Curtis, C. J.; Miedaner, A.; Pasquarelli, R. M.; Kaydonova, T.; Hersh, P.; Ginley, D. S.

    2008-05-01

    Using direct-write approaches in photovoltaics for metallization and contact formation can significantly reduce the cost per watt of producing photovoltaic devices. Inks have been developed for various materials, such as Ag, Cu, Ni and Al, which can be used to inkjet print metallizations for various kinds of photovoltaic devices. Use of these inks results in metallization with resistivities close to those of bulk materials. By means of inkjet printing a metallization grid can be printed with better resolution, i.e. smaller lines, than screen-printing. Also inks have been developed to deposit transparent conductive oxide films by means of ultrasonic spraying.

  20. Writing World-Wide Web CGI scripts in the REXX language

    SciTech Connect (OSTI)

    Cottrell, R.L.A.

    1996-03-01

    This talk is aimed at people who have experience with REXX and are interested in using it to write WWW CGI scripts. As part of this, the author describes several functions that are available in a library of REXX functions that simplify writing WWW CGI scripts. This library is freely available at //www.slac.standard.edu/slac/www/tool/cgi-rexx/.

  1. Archimedes' Oldest Writings Under X-ray vision (BNL Women in Science Lecture Series)

    SciTech Connect (OSTI)

    Bergmann, Uwe

    2009-05-20

    Large parts of Archimedes’ writings were recently deciphered at the Stanford Synchrotron Radiation Lightsource at SLAC. A special x-ray technique showed maps of iron in faint traces of partially erased ink. The x-ray images revealed Archimedes’ writings from some of his most important works that were hidden by twelfth-century biblical texts, mold and forged gold paintings.

  2. Water-mediated electrochemical nano-writing on thin ceria films...

    Office of Scientific and Technical Information (OSTI)

    ... SciTech Connect Search Results Journal Article: Water-mediated electrochemical nano-writing on thin ceria films Citation Details In-Document Search Title: Water-mediated ...

  3. Grant writing assistance available to small businesses, nonprofits and K-20

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    STEM education programs Grant writing assistance available to small businesses, nonprofits and K-20 STEM education programs Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Grant writing assistance available to small businesses, nonprofits and K-20 STEM education programs Initiative helps increase funding, build local infrastructure May 5, 2014 Scenic view near the village of

  4. Single beam write and/or replay of spatial heterodyne holograms

    DOE Patents [OSTI]

    Thomas, Clarence E.; Hanson, Gregory R.

    2007-11-20

    A method of writing a spatially heterodyne hologram having spatially heterodyne fringes includes: passing a single write beam through a spatial light modulator that digitally modulates said single write beam; and focusing the single write beam at a focal plane of a lens to impose a holographic diffraction grating pattern on the photorefractive crystal, the holographic diffraction grating pattern including the spatially heterodyne hologram having spatially heterodyne fringes, wherein only said single write beam is incident on said photorefractive crystal without a reference beam. A method of replaying a spatially heterodyne hologram having spatially heterodyne fringes at a replay angle includes: illuminating a photorefractive crystal having a holographic diffraction grating with a beam from a laser at an illumination angle, the holographic diffraction grating pattern including the spatially heterodyne hologram having spatially heterodyne fringes, wherein a difference between said illumination angle and said replay angle defines a diffraction angle .alpha. that is a function of a plane wave mathematically added to original object wave phase and amplitude data of said spatially heterodyne hologram having spatially heterodyne fringes.

  5. Multiple-Level MPI File Write-Back and Prefetching for Blue Gene Systems |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Leadership Computing Facility Multiple-Level MPI File Write-Back and Prefetching for Blue Gene Systems Authors: Isaila, F., Blas, J.G., Carretero, J., Latham, R., Ross, R. This paper presents the design and implementation of an asynchronous data-staging strategy for file accesses based on ROMIO, the most popular MPI-IO distribution, and ZeptoOS, an open source operating system solution for Blue Gene systems. We describe and evaluate a two-level file write-back implementation and a

  6. Development of the Write Process for Pipeline-Ready Heavy Oil

    SciTech Connect (OSTI)

    Lee Brecher; Charles Mones; Frank Guffey

    2009-03-07

    Work completed under this program advances the goal of demonstrating Western Research Institute's (WRI's) WRITE{trademark} process for upgrading heavy oil at field scale. MEG Energy Corporation (MEG) located in Calgary, Alberta, Canada supported efforts at WRI to develop the WRITE{trademark} process as an oil sands, field-upgrading technology through this Task 51 Jointly Sponsored Research project. The project consisted of 6 tasks: (1) optimization of the distillate recovery unit (DRU), (2) demonstration and design of a continuous coker, (3) conceptual design and cost estimate for a commercial facility, (4) design of a WRITE{trademark} pilot plant, (5) hydrotreating studies, and (6) establish a petroleum analysis laboratory. WRITE{trademark} is a heavy oil and bitumen upgrading process that produces residuum-free, pipeline ready oil from heavy material with undiluted density and viscosity that exceed prevailing pipeline specifications. WRITE{trademark} uses two processing stages to achieve low and high temperature conversion of heavy oil or bitumen. The first stage DRU operates at mild thermal cracking conditions, yielding a light overhead product and a heavy residuum or bottoms material. These bottoms flow to the second stage continuous coker that operates at severe pyrolysis conditions, yielding light pyrolyzate and coke. The combined pyrolyzate and mildly cracked overhead streams form WRITE{trademark}'s synthetic crude oil (SCO) production. The main objectives of this project were to (1) complete testing and analysis at bench scale with the DRU and continuous coker reactors and provide results to MEG for process evaluation and scale-up determinations and (2) complete a technical and economic assessment of WRITE{trademark} technology to determine its viability. The DRU test program was completed and a processing envelope developed. These results were used for process assessment and for scaleup. Tests in the continuous coker were intended to determine the

  7. Duke University Writes About Physics Link Between JLab Father-Daughter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Duke Physics News) | Jefferson Lab Duke University Writes About Physics Link Between JLab Father-Daughter (Duke Physics News) External Link: http://news.phy.duke.edu/2012/08/duke-physics-is-a-family-tradition-for-chip-and... By jlab_admin on Mon, 2012-08-0

  8. Final Report for Grant "Direct Writing via Novel Aromatic Ladder Polymer Precursors"

    SciTech Connect (OSTI)

    C. B. Gorman

    2010-10-29

    This report describes activities and findings under the above entitled grant. These pertain to the development of new synthetic routes to novel precursor polymers and oligomers that are applicable for conversion from electrical insulators to electrical conductors under the application of light (e.g. direct photolithographic writing)

  9. Secrets in the Ancient Goatskins: X-Rays Reveal Archimedes' Oldest Writings

    ScienceCinema (OSTI)

    Bergmann, Uwe [SLAC Linear Accelerator Center, United States

    2010-01-08

    Archimedes of Syracruse (287 - 212 B.C.) is considered one of the most brilliant thinkers of all time. The tenth-century parchment known as the Archimedes Palimpsest is by far the oldest surviving manuscript containing works of Archimedes. it is also the unique source for three of the Greek's treatises: the Stomachion, the Method of Mechanical Theorems, and the Greek version of On Floating Bodies. The privately owned palimpsest is the subject of a integrated campaign of conservation, imaging, and scholarship being undertaken at the Walters Art Museum in Baltimore. Much of the text has been imaged by various optical techniques, but significant gaps in our knowledge of the writing of Archimedes remained. A breakthrough in uncovering the missing Archimedes writings was achieved at the Stanford Synchrotron Radiation Laboratory. Using x-ray fluorescence imaging, writings from faint traces of the partly erased iron gall ink were brought to light. The x-ray image revealed Archimedes writings from some of his most important works covered by twelfth-century biblical texts and twentieth-century gold forgeries. This talk will focus on the fascinating journal of a 1,000 year old parchment from its origin in the Mediterranean city of Constantinople to an x-ray beamline at SLAC.

  10. Acquisition Career Management Program (Informational Purposes Only)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-11-21

    This draft has been scheduled for final review before the Directives Review Board on 4-2-15 (delayed from 12-4-14 session). All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 3-31-15.

  11. n your own words, write down what. happened in the event. include env informatio

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    n your own words, write down what. happened in the event. include env information from before the event began unti after it was ovier, Incluce the folowin. 1. ant conditions as you know them odror to the event 2. Any indication that a problem exised 3. List any equipment malfunctions 4. What you ware doing Immediately prior to the event 5. Your actions in response to the indications 6. 'List any Inadequacies In the procedures, practices, or training NOTE: IIt additional sheets are used sign,

  12. Electron nanoprobe induced oxidation: A simulation of direct-write purification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Fowlkes, J. D.; Geier, B.; Lewis, B. B.; Rack, P. D.; Stanford, M. G.; Winkler, R.; Plank, H.

    2015-06-01

    Electron beam direct-write has recently taken a large step forward with the advent of methods to purify deposits. This development has opened the door for future direct-write device prototyping and editing. In one such approach, an additional beam scanning procedure removes carbonaceous impurities via oxidation from metal–carbon deposits (e.g., PtC5) in the presence of H2O or O2 after deposition. So far, critical aspects of the oxidation reaction remain unclear; experiments reveal clearly that electron stimulated oxidation drives the process yet it is not understood why H2O purifies by a bottom-up mechanism while O2 purifies from the top-down. The simulation resultsmore » presented here suggest that the chemisorption of dissolved O2 at buried Pt nanoparticle surfaces controls purification in the top-down case while both the high relative solubility coupled with weak physisorption of H2O explains the bottom-up process. Crucial too is the role that the carbonaceous contaminant itself has on the dissolution and diffusion of O2 and H2O. The results pave the way for simulation driven experiments where (1) the transient densification of the deposit can be accounted for in the initial deposit design stage and (2) the deposition and purification steps can be combined.« less

  13. Electron nanoprobe induced oxidation: A simulation of direct-write purification

    SciTech Connect (OSTI)

    Fowlkes, J. D.; Geier, B.; Lewis, B. B.; Rack, P. D.; Stanford, M. G.; Winkler, R.; Plank, H.

    2015-06-01

    Electron beam direct-write has recently taken a large step forward with the advent of methods to purify deposits. This development has opened the door for future direct-write device prototyping and editing. In one such approach, an additional beam scanning procedure removes carbonaceous impurities via oxidation from metal–carbon deposits (e.g., PtC5) in the presence of H2O or O2 after deposition. So far, critical aspects of the oxidation reaction remain unclear; experiments reveal clearly that electron stimulated oxidation drives the process yet it is not understood why H2O purifies by a bottom-up mechanism while O2 purifies from the top-down. The simulation results presented here suggest that the chemisorption of dissolved O2 at buried Pt nanoparticle surfaces controls purification in the top-down case while both the high relative solubility coupled with weak physisorption of H2O explains the bottom-up process. Crucial too is the role that the carbonaceous contaminant itself has on the dissolution and diffusion of O2 and H2O. The results pave the way for simulation driven experiments where (1) the transient densification of the deposit can be accounted for in the initial deposit design stage and (2) the deposition and purification steps can be combined.

  14. Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

    DOE Patents [OSTI]

    Frank, Alan M.; Edwards, William R.

    1983-01-01

    A long-lifetime light source with sufficiently low intensity to be used for reading a map or other writing at nighttime, while not obscuring the user's normal night vision. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode.

  15. A guide to writing procurement specifications for new and existing CHAWS sites

    SciTech Connect (OSTI)

    Martins, S.A.; Fry, C.

    1991-09-01

    Turn-key Chemical Hazard Warning Systems (CHAWS) have been designed by the Lawrence Livermore National Laboratory (LLNL) and installed at a number of US Army sites. This document is intended to be used as a guide by those charged with writing procurement specification for both new and existing CHAWS sites. It discusses issues of system design and the functional requirements for both hardware and software. Suggestions are made for those interested in updating the computer platform and/or operating system used in older CHAWS designs. The topics of new-site installation and training are only briefly discussed. The reader is referred to the CHAWS User's Guides listed in the bibliography for user information. 5 refs., 1 tab.

  16. Direct writing of continuous and discontinuous sub-wavelength periodic surface structures on single-crystalline silicon using femtosecond laser

    SciTech Connect (OSTI)

    Kuladeep, Rajamudili; Sahoo, Chakradhar; Narayana Rao, Desai E-mail: dnr-laserlab@yahoo.com

    2014-06-02

    Laser-induced ripples or uniform arrays of continuous near sub-wavelength or discontinuous deep sub-wavelength structures are formed on single-crystalline silicon (Si) by femtosecond (fs) laser direct writing technique. Laser irradiation was performed on Si wafers at normal incidence in air and by immersing them in dimethyl sulfoxide using linearly polarized Ti:sapphire fs laser pulses of ∼110 fs pulse duration and ∼800 nm wavelength. Morphology studies of laser written surfaces reveal that sub-wavelength features are oriented perpendicular to laser polarization, while their morphology and spatial periodicity depend on the surrounding dielectric medium. The formation mechanism of the sub-wavelength features is explained by interference of incident laser with surface plasmon polaritons. This work proves the feasibility of fs laser direct writing technique for the fabrication of sub-wavelength features, which could help in fabrication of advanced electro-optic devices.

  17. Read/write head having a GMR sensor biased by permanent magnets located between the GMR and the pole shields

    DOE Patents [OSTI]

    Yuan, Samuel W.; Rottmayer, Robert Earl; Carey, Matthew J.

    1999-01-01

    A compact read/write head having a biased giant magnetoresistive sensor. Permanent magnet films are placed adjacent to the giant magnetoresistive sensor operating in the current-perpendicular-to the-plane (Cpp) mode and spaced with respect to the sensor by conducting films. These permanent magnet films provide a magnetic bias. The bias field is substantial and fairly uniform across sensor height. Biasing of the giant magnetoresistive sensor provides distinguishable response to the rising and falling edges of a recorded pulse on an adjacent recording medium, improves the linearity of the response, and helps to reduce noise. This read/write head is much simpler to fabricate and pattern and provides an enhanced uniformity of the bias field throughout the sensor.

  18. Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

    DOE Patents [OSTI]

    Frank, A.M.; Edwards, W.R.

    1983-10-11

    A long-lifetime light source with sufficiently low intensity to be used for reading a map or other writing at nighttime, while not obscuring the user's normal night vision is disclosed. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode. 1 fig.

  19. Long lifetime, low intensity light source for use in nighttime viewing of equipment maps and other writings

    DOE Patents [OSTI]

    Frank, A.M.; Edwards, W.R.

    1982-03-23

    A long-lifetime light source is discussed with sufficiently low intensity to be used for reading a map or other writing at nightime, while not obscuring the user's normal night vision. This light source includes a diode electrically connected in series with a small power source and a lens properly positioned to focus at least a portion of the light produced by the diode.

  20. Gamma Radiation Aging Study of a Dow Corning SE 1700 Porous Structure Made by Direct Ink Writing

    SciTech Connect (OSTI)

    Small, Ward; Alviso, Cindy T.; Metz, Tom R.

    2015-11-13

    Dow Corning SE 1700 (reinforced polydimethylsiloxane) porous structures were made by direct ink writing (DIW). The specimens (~50% porosity) were subjected to a compressive strain of ~25% while exposed to a gamma radiation dose of 1, 5, or 10 Mrad under vacuum. Compression set and load retention of the aged specimens were measured after a ~24 h relaxation period. Compression set (relative to deflection) increased with radiation dose: 11, 35, and 51% after 1, 5, and 10 Mrad, respectively. Load retention was 96-97% for the doses tested. The SE 1700 compared favorably to M9763 cellular silicone tested under the same conditions.

  1. Evict on write, a management strategy for a prefetch unit and/or first level cache in a multiprocessor system with speculative execution

    DOE Patents [OSTI]

    Gara, Alan; Ohmacht, Martin

    2014-09-16

    In a multiprocessor system with at least two levels of cache, a speculative thread may run on a core processor in parallel with other threads. When the thread seeks to do a write to main memory, this access is to be written through the first level cache to the second level cache. After the write though, the corresponding line is deleted from the first level cache and/or prefetch unit, so that any further accesses to the same location in main memory have to be retrieved from the second level cache. The second level cache keeps track of multiple versions of data, where more than one speculative thread is running in parallel, while the first level cache does not have any of the versions during speculation. A switch allows choosing between modes of operation of a speculation blind first level cache.

  2. TH-D-16A-01: Medical Physics Workshop: Editorial Vision and Guidance On Writing and Reviewing Papers

    SciTech Connect (OSTI)

    Williamson, J; Das, S; Goodsitt, M

    2014-06-15

    On January 1, 2014, editorial leadership of Medical Physics passed from esteemed long-time Editor Bill Hendee to a collective editorial group composed of the three presenters listed above. In this presentation, we would like to outline our vision for the future of Medical Physics and review recent work-in-progress initiatives to implement this vision. Finally, we will close with guidance to authors on how to write a good Medical Physics paper. Vision for Medical Physics and current initiatives: Jeff Williamson, Editor-in-Chief We cannot improve on Dr. Hendee's succinct vision statement to continue the Journal's tradition of publishing the very best science that propels our discipline forward and improves our contribution to patient care. More concretely, the Journal should be s the preeminent forum for electronic exchange of cutting edge medical physics science. We seek to identify the best contributions in (a) high impact clinical physics innovations; (b) clinical translation and validation of basic science innovations; or (c) cutting edge basic science developments with potential for patient care improvements. Among the challenges and opportunities we face are: are electronic-only and open access publishing; trends towards more interactive, social-media based scientific communities; and diversification of the medical physics research, authorship, and readership domains, including clinical applications quite foreign to core ABR clinical competencies. To address these issues over the next 3 years, we have reduced the size of our Editorial Board and focused its efforts on improving the Journal's impact through 4 working groups (WGs): WG-1: Review process quality and selectivity Creation of 120 member Board of Associate Editors to improve review uniformity by placing Ms. management in fewer hands New reviewer guidelines and templates Answer: what is the scope of medical physics research? Recursive taxonomy for tagging review expertise and article contents WG-2

  3. Writing testable software requirements

    SciTech Connect (OSTI)

    Knirk, D.

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  4. Realization of write-once-read-many-times memory device with O{sub 2} plasma-treated indium gallium zinc oxide thin film

    SciTech Connect (OSTI)

    Liu, P. Chen, T. P. Li, X. D.; Wong, J. I.; Liu, Z.; Liu, Y.; Leong, K. C.

    2014-01-20

    A write-once-read-many-times (WORM) memory devices based on O{sub 2} plasma-treated indium gallium zinc oxide (IGZO) thin films has been demonstrated. The device has a simple Al/IGZO/Al structure. The device has a normally OFF state with a very high resistance (e.g., the resistance at 2?V is ?10{sup 9} ? for a device with the radius of 50??m) as a result of the O{sub 2} plasma treatment on the IGZO thin films. The device could be switched to an ON state with a low resistance (e.g., the resistance at 2?V is ?10{sup 3} ? for the radius of 50??m) by applying a voltage pulse (e.g., 10?V/1??s). The WORM device has good data-retention and reading-endurance capabilities.

  5. Thermal Aging Study of a Dow Corning SE 1700 Porous Structure Made by Direct Ink Writing: 1-Year Results and Long-Term Predictions

    SciTech Connect (OSTI)

    Small, Ward; Pearson, Mark A.; Maiti, Amitesh; Metz, Thomas R.; Duoss, Eric B.; Wilson, Thomas S.

    2015-11-13

    Dow Corning SE 1700 (reinforced polydimethylsiloxane) porous structures were made by direct ink writing (DIW). The specimens (~50% porosity) were subjected to various compressive strains (15, 30, 45%) and temperatures (room temperature, 35, 50, 70°C) in a nitrogen atmosphere (active purge) for 1 year. Compression set and load retention of the aged specimens were measured periodically during the study. Compression set increased with strain and temperature. After 1 year, specimens aged at room temperature, 35, and 50°C showed ~10% compression set (relative to the applied compressive deflection), while those aged at 70°C showed 20-40%. Due to the increasing compression set, load retention decreased with temperature, ranging from ~90% at room temperature to ~60-80% at 70°C. Long-term compression set and load retention at room temperature were predicted by applying time-temperature superposition (TTS). The predictions show compression set relative to the compressive deflection will be ~10-15% with ~70-90% load retention after 50 years at 15-45% strain, suggesting the material will continue to be mechanically functional. Comparison of the results to previously acquired data for cellular (M97*, M9760, M9763) and RTV (S5370) silicone foams suggests that the SE 1700 DIW porous specimens are on par with, or outperform, the legacy foams.

  6. Formation and direct writing of color centers in LiF using a laser-induced extreme ultraviolet plasma in combination with a Schwarzschild objective

    SciTech Connect (OSTI)

    Barkusky, Frank; Peth, Christian; Mann, Klaus; Feigl, Torsten; Kaiser, Norbert

    2005-10-15

    In order to generate high-energy densities of 13.5 nm radiation, an extreme ultraviolet (EUV) Schwarzschild mirror objective with a numerical aperture of 0.44 and a demagnification of 10 was developed and adapted to a compact laser-based EUV source. The annular spherical mirror substrates were coated with Mo/Si multilayer systems. With a single mirror reflectance of more than 65% the total transmittance of the Schwarzschild objective exceeds 40% at 13.5 nm. From the properties of the EUV source (pulse energy 3 mJ at 13.5 nm and plasma diameter approximately 300 {mu}m), energy densities of 73 mJ/cm{sup 2} at a pulse length of 6 ns can be estimated in the image plane of the objective. As a first application, the formation of color centers in lithium fluoride crystals by EUV radiation was investigated. F{sub 2}, F{sub 3}, and F{sub 3}{sup +} color centers could be identified by absorption spectroscopy. The formation dynamics was studied as a function of the EUV dose. By imaging of a pinhole positioned behind the plasma, an EUV spot of 5 {mu}m diameter was generated, which accomplishes direct writing of color centers with micrometer resolution.

  7. Correlation of anomalous write error rates and ferromagnetic resonance spectrum in spin-transfer-torque-magnetic-random-access-memory devices containing in-plane free layers

    SciTech Connect (OSTI)

    Evarts, Eric R.; Rippard, William H.; Pufall, Matthew R.; Heindl, Ranko

    2014-05-26

    In a small fraction of magnetic-tunnel-junction-based magnetic random-access memory devices with in-plane free layers, the write-error rates (WERs) are higher than expected on the basis of the macrospin or quasi-uniform magnetization reversal models. In devices with increased WERs, the product of effective resistance and area, tunneling magnetoresistance, and coercivity do not deviate from typical device properties. However, the field-swept, spin-torque, ferromagnetic resonance (FS-ST-FMR) spectra with an applied DC bias current deviate significantly for such devices. With a DC bias of 300 mV (producing 9.9 × 10{sup 6} A/cm{sup 2}) or greater, these anomalous devices show an increase in the fraction of the power present in FS-ST-FMR modes corresponding to higher-order excitations of the free-layer magnetization. As much as 70% of the power is contained in higher-order modes compared to ≈20% in typical devices. Additionally, a shift in the uniform-mode resonant field that is correlated with the magnitude of the WER anomaly is detected at DC biases greater than 300 mV. These differences in the anomalous devices indicate a change in the micromagnetic resonant mode structure at high applied bias.

  8. Extended write combining using a write continuation hint flag

    SciTech Connect (OSTI)

    Chen, Dong; Gara, Alan; Heidelberger, Philip; Ohmacht, Martin; Vranas, Pavlos

    2013-06-04

    A computing apparatus for reducing the amount of processing in a network computing system which includes a network system device of a receiving node for receiving electronic messages comprising data. The electronic messages are transmitted from a sending node. The network system device determines when more data of a specific electronic message is being transmitted. A memory device stores the electronic message data and communicating with the network system device. A memory subsystem communicates with the memory device. The memory subsystem stores a portion of the electronic message when more data of the specific message will be received, and the buffer combines the portion with later received data and moves the data to the memory device for accessible storage.

  9. Electrochromic projection and writing device

    DOE Patents [OSTI]

    Branz, Howard M.; Benson, David K.

    2002-01-01

    A display and projection apparatus includes an electrochromic material and a photoconductive material deposited in tandem used in conjunction with a light filtering means for filtering light transmitted through the electrochromic material. When an electric field is applied across the electrochromic material and the photoconductive material, light that is incident onto the photoconductive material through the surface of the projection apparatus causes the photoconductive material to conduct current locally in proportion to the amount of light incident on the photoconductive material. The flow of current causes the underlying portions of the electrochromic material to switch from an opaque state to a clear or transmissive state, thereby allowing back-light to propagate through the electrochromic material to create a visible image on the surface of the projection apparatus. Reversal of the electric field causes the electrochromic material to revert back to its opaque state, thereby blocking the transmission of back-light and effectively erasing the image from the surface of the projection apparatus.

  10. Writing audit findings: Be reasonable!

    SciTech Connect (OSTI)

    Girvin, N.W.

    1992-05-01

    A customary approach to auditing and reporting deficiencies is to keep a running list of those that are found, evaluate the severity of each, and based on the evidence, document findings or observations or concerns in an audit report. The report is issued and the auditee is normally requested to address ``root cause`` as part of their corrective action. This paper describes a ``root problems`` approach to documenting audit findings that is designed not only to put the QA auditor in a more favorable light, but to more effectively enable the auditee to identify root cause and meaningful corrective action. The positive results of this approach are considerable. You will have fewer findings but those you do have will be substantial. You will cite requirements that sound reasonable and make arguments difficult. If some of the supporting deficiencies (examples) prove to be incorrect, you will still have ample support for the original finding. You will be seen as reasonable individual who can help lead the auditee towards identification of root cause without taking away part of the responsibility. You even have a fair chance of fostering a sense of commitment to quality improvement on the auditee`s part. This in itself, is its own reward.

  11. Writing audit findings: Be reasonable

    SciTech Connect (OSTI)

    Girvin, N.W.

    1992-05-01

    A customary approach to auditing and reporting deficiencies is to keep a running list of those that are found, evaluate the severity of each, and based on the evidence, document findings or observations or concerns in an audit report. The report is issued and the auditee is normally requested to address root cause'' as part of their corrective action. This paper describes a root problems'' approach to documenting audit findings that is designed not only to put the QA auditor in a more favorable light, but to more effectively enable the auditee to identify root cause and meaningful corrective action. The positive results of this approach are considerable. You will have fewer findings but those you do have will be substantial. You will cite requirements that sound reasonable and make arguments difficult. If some of the supporting deficiencies (examples) prove to be incorrect, you will still have ample support for the original finding. You will be seen as reasonable individual who can help lead the auditee towards identification of root cause without taking away part of the responsibility. You even have a fair chance of fostering a sense of commitment to quality improvement on the auditee's part. This in itself, is its own reward.

  12. Search for: All records | DOE PAGES

    Office of Scientific and Technical Information (OSTI)

    Sally ; Pickering, Ingrid J. ; George, Graham N. ; Krone, Patrick H. October 2015 , Elsevier Elemental and Chemically Specific X-ray Fluorescence Imaging of Biological Systems ...

  13. A Small Molecule That Switches a Ubiquitin Ligase From a Processive...

    Office of Scientific and Technical Information (OSTI)

    Title: A Small Molecule That Switches a Ubiquitin Ligase From a Processive to a Distributive Enzymatic Mechanism Authors: Kathman, Stefan G. ; Span, Ingrid ; Smith, Aaron T. ; Xu, ...

  14. Before the Subcommittee on National Parks - Senate Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Parks - Senate Committee on Energy and Natural Resources Before the Subcommittee on National Parks - Senate Committee on Energy and Natural Resources Testimony of Ingrid ...

  15. Fermilab | Directorate | Engineering Advisory Council (EAC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Steven Dixon Ingrid Fang Gabriele Garzoglio Arkadiy Klebaner Lidija Kokoska Alexander Martinez Jamieson Olsen Randy Ortgiesen Alan Prosser Cosmore Sylvester Mayling Wong-Squires...

  16. Invitation to the 2012 DOE Project Management Workshop | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon Kolb Signed.pdf More Documents & Publications FY2012 Excess Elimination Report United States and France Sign Joint Statement on Civil Liability for Nuclear Damage ...

  17. Writing magnetic patterns with surface acoustic waves

    SciTech Connect (OSTI)

    Li, Weiyang; Buford, Benjamin; Jander, Albrecht; Dhagat, Pallavi

    2014-05-07

    A novel patterning technique that creates magnetization patterns in a continuous magnetostrictive film with surface acoustic waves is demonstrated. Patterns of 10 μm wide stripes of alternating magnetization and a 3 μm dot of reversed magnetization are written using standing and focusing acoustic waves, respectively. The magnetization pattern is size-tunable, erasable, and rewritable by changing the magnetic field and acoustic power. This versatility, along with its solid-state implementation (no moving parts) and electronic control, renders it as a promising technique for application in magnetic recording, magnonic signal processing, magnetic particle manipulation, and spatial magneto-optical modulation.

  18. Microsoft Word - Internet Write-Up.doc

    Energy Savers [EERE]

    Sandia National Laboratories Nuclear Weapons Safety Program (U) DOEIG-0799 July 2008 The following is an unclassified summary of the classified Audit Report on "Sandia National ...

  19. Writing Effective Executive Accomplishment Narratives Executive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    you overcame * Use first person, past tense and non-jargon terms; PRB members may not ... it is an executive who: o Demonstrates the high level of performance expected and actions ...

  20. Writing Winning Proposals | Department of Energy

    Energy Savers [EERE]

    the Workforce | Department of Energy Wrapping Up: Our Conversation on Increasing Diversity in STEM Education and the Workforce Wrapping Up: Our Conversation on Increasing Diversity in STEM Education and the Workforce March 5, 2013 - 9:43am Addthis Watch our science and tech experts answer questions and share advice on STEM Education and Careers. Dot Harris Dot Harris Director, Office of Economic Impact and Diversity Where Can I Learn More? Visit diversity.energy.gov for more on the

  1. Tips for Writing a Competitive User Proposal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    loosely related experiments in a single proposal Clearly articulate the science case: state the problem and its importance Place your research plan in the context of...

  2. Proposal Writing Guidelines and Scoring Criteria

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    when the reasons for choosing a specific beamline are clearly stated, e.g., unique features, required resolution, higher flux, etc. Criteria for Evaluating the Scientific...

  3. Maskless laser writing of microscopic metallic interconnects

    DOE Patents [OSTI]

    Maya, Leon

    1995-01-01

    A method of forming a metal pattern on a substrate. The method includes depositing an insulative nitride film on a substrate and irradiating a laser beam onto the nitride film, thus decomposing the metal nitride into a metal constituent and a gaseous constituent, the metal constituent remaining in the nitride film as a conductive pattern.

  4. Maskless laser writing of microscopic metallic interconnects

    DOE Patents [OSTI]

    Maya, L.

    1995-10-17

    A method of forming a metal pattern on a substrate is disclosed. The method includes depositing an insulative nitride film on a substrate and irradiating a laser beam onto the nitride film, thus decomposing the metal nitride into a metal constituent and a gaseous constituent, the metal constituent remaining in the nitride film as a conductive pattern. 4 figs.

  5. Reading the Cosmic Writing on the Wall

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    They reveal that the universe is about 100 million years older than we thought with more matter and less dark energy and a slower expansion rate. "These maps are proving to be a ...

  6. Sandia Energy - Dr. David Danielson Visit to NSTTF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    touring NSTTF Questions about the NSTTF and its capabilities can be directed to William Kolb wjkolb@sandia.gov and James Pacheco, program manager jepache@sandia.gov. By Tara...

  7. NALWO CALENDAR 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kolb - May 20, 12 p.m. SEPTEMBER Gathering at Artist Reception - Sept. 26, Wilson Hall Art Gallery 5 - 7 p.m. FEBRUARY Crpe Cooking Demonstration - Feb. 3 - Chez Leon 11 a.m. -...

  8. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    CN Long (1) Charles E. Kolb (1) Collins, D. R. (1) Save Results Save this search to My ... from active wildfire and agricultural burns to help identify the impact of these ...

  9. Sandia Energy - EC Publications

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solar Energy author Ho, C.K. and G.J. Kolb report-id SAND2009-3003C year 2009 event Energy Sustainability 2009 location San Francisco, CA A method for applying probabilistic...

  10. 2016 INCITE Proposal Writing Webinar | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Overview Allocation Programs INCITE Mission and Stats Titan and Mira Tips for Applicants: Common oversights Requesting a startup account Benchmarking data Q&A open discussion...

  11. THE VALIDITY OF HUMAN AND COMPUTERIZED WRITING ASSESSMENT

    SciTech Connect (OSTI)

    Ronald L. Boring

    2005-09-01

    This paper summarizes an experiment designed to assess the validity of essay grading between holistic and analytic human graders and a computerized grader based on latent semantic analysis. The validity of the grade was gauged by the extent to which the students knowledge of the topic correlated with the graders expert knowledge. To assess knowledge, Pathfinder networks were generated by the student essay writers, the holistic and analytic graders, and the computerized grader. It was found that the computer generated grades more closely matched the definition of valid grading than did human generated grades.

  12. Writing Effective Initial Summary Ratings Initial Summary Rating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initial Summary Ratings Initial Summary Rating (ISR) At the end of the performance cycle, the rating official must prepare an ISR in ePerformance for each SES member who has ...

  13. Writing Effective Executive Accomplishment Narratives Executive Accomplishment Narrative (EAN)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Executive Accomplishment Narratives Executive Accomplishment Narrative (EAN) At the end of the performance cycle, all career and limited term SES members who have been on a performance plan for a minimum of 90 days must provide an EAN that highlights the results achieved as it relates to the performance requirements and organizational results in ePerformance. While the completion of an Executive Accomplishment Narrative is optional for non-career SES members, it is strongly recommended. This

  14. Writing Effective Initial Summary Ratings Initial Summary Rating (ISR)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initial Summary Ratings Initial Summary Rating (ISR) At the end of the performance cycle, the rating official must prepare an ISR in ePerformance for each SES member who has completed at least 90 days on an established performance plan. Rating officials must take into account the SES member's accomplishments achieved during the performance cycle and the impact to the organization's performance. Rating officials must appraise executives realistically and fairly and avoid ratings inflation.

  15. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electron microscopes at ALS Beamlines 7.3.1 and 11.0.1. From Sand to Processor Modern electronic integrated circuits are made of silicon. Silicon is the most abundant element...

  16. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of removing-silicon (and germanium) nanostructures at precise wafer locations. This strategy holds the potential for fabricating transistors in fewer steps with less material...

  17. Summer science-writing internship for undergraduates | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    accredited college or university and must have a strong interest in science-related journalism. Participants will work at least ten 40-hour weeks on science news and feature...

  18. Direct-Write of Silicon and Germanium Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    deliver desired stimuli or chemicals to a small area of a sample surface. Specifically, atomic force microscopy (AFM) has been employed in several nanofabrication schemes....

  19. Bringing Proposal Writing Training to Faculty at Minority Serving Institutions

    Broader source: Energy.gov [DOE]

    Money doesn’t grow on trees, but it does grow from developing your school and business to the point that you’re ready to compete for a Department of Energy funding opportunity. Our office’s mission...

  20. Tribal Wildlife Grant (FWS)- Grant Writing Strategy Webinar

    Broader source: Energy.gov [DOE]

    Prosper Sustainably is hosting a free webinar on July 23, 2014 at 1pm PST that reviews the FWS Tribal Wildlife Grant funding opportunity. During the webinar Josh Simmons, Prosper Sustainably’s...

  1. Summer science-writing internship | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summer gasoline price forecast slightly higher, but drivers still pay less than last year Rising crude oil prices are likely to be passed on to consumers at the pump, but U.S. drivers are still expected to pay the lowest summer gasoline prices since 2004, and for all of 2016 the average household will spend $900 less on gasoline than it did two years ago." In its new monthly forecast, the U.S. Energy Information Administration said the retail price for regular grade gasoline will average

  2. Improving Your Overall Writing Style | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improving Well Productivity Based Modeling with the Incorporation of Geologic Dependencies Troy Cook and Dana Van Wagener October 14, 2014 Independent Statistics & Analysis www.eia.gov U.S. Energy Information Administration Washington, DC 20585 This paper is released to encourage discussion and critical comment. The analysis and conclusions expressed here are those of the authors and not necessarily those of the U.S. Energy Information Administration. WORKING PAPER SERIES October 2014 Tony

  3. Ames Laboratory provides Greenlee students with science writing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to improve rare earth purification process (phys.org - 72214 by Austin Kerber) Ames Lab scientist hopes to improve rare earth purification process - by Austin Kerber Ames...

  4. Process for Converting Algal Oil to Alternative Aviation Fuel - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Process for Converting Algal Oil to Alternative Aviation Fuel Los Alamos National Laboratory Contact LANL About This Technology The conversion process uses a Kolbe-based method of converting the fatty acids from the algal lipid triglycerides to fuel. The conversion process uses a Kolbe-based method of converting the fatty acids from the algal lipid triglycerides to fuel. Technology Marketing Summary Conversion of triglyceride oils extracted from algae-derived lipids into

  5. 3-D Mesh Generation Nonlinear Systems

    SciTech Connect (OSTI)

    1994-04-07

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surface equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.

  6. SSRL HEADLINES Jan 2002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 January, 2002 _____________________________________________________________________________ Contents of This Issue: Science Highlight - Bacterial Sulfur Storage Globules Delegation from Catalonia Visits SSRL SSRL Users' Organization Executive Committee Update A Decade of Dedication Beam Line 2 Vacuum Leak Follow-up SSRL in the News Upcoming Events at SSRL and Elsewhere User Research Administration Announcements 1. Science Highlight - Bacterial Sulfur Storage Globules (contacts: Ingrid

  7. --No Title--

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    document.write(' Lawrence Berkeley National Laboratory'); document.write(' Massachusetts Institute of Technology'); document.write(' Rutgers University'); document.write('...

  8. Microsoft Word - DETF_Final.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REPORT OF THE DARK ENERGY TASK FORCE Andreas Albrecht, University of California, Davis Gary Bernstein, University of Pennsylvania Robert Cahn, Lawrence Berkeley National Laboratory Wendy L. Freedman, Carnegie Observatories Jacqueline Hewitt, Massachusetts Institute of Technology Wayne Hu, University of Chicago John Huth, Harvard University Marc Kamionkowski, California Institute of Technology Edward W. Kolb, Fermi National Accelerator Laboratory and The University of Chicago Lloyd Knox,

  9. Passive micromechanical tags. An investigation into writing information at nanometer resolution on micrometer size objects

    SciTech Connect (OSTI)

    Schmieder, R.W.; Bastasz, R.J.

    1995-01-01

    The authors have completed a 3-year study of the technology related to the development of micron-sized passive micromechanical tags. The project was motivated by the discovery in 1990 by the present authors that low energy, high charge state ions (e.g., Xe{sup +44}) can produce nanometer-size damage sites on solid surfaces, and the realization that a pattern of these sites represents information. It was envisioned that extremely small, chemically inert, mechanical tags carrying a large label could be fabricated for a variety of applications, including tracking of controlled substances, document verification, process control, research, and engineering. Potential applications exist in the data storage, chemical, food, security, and other industries. The goals of this project were fully accomplished, and they are fully documented here. The work was both experimental and developmental. Most of the experimental effort was a search for appropriate tag materials. Several good materials were found, and the upper limits of information density were determined (ca. 10{sup 12} bit/cm{sup 2}). Most of the developmental work involved inventing systems and strategies for using these tags, and compiling available technologies for implementing them. The technology provided herein is application-specific: first, the application must be specified, then the tag can be developed for it. The project was not intended to develop a single tag for a single application or for all possible applications. Rather, it was meant to provide the enabling technology for fabricating tags for a range of applications. The results of this project provide sufficient information to proceed directly with such development.

  10. Seminole Tribe of Florida Native Learning Center Webinar: Grant Writing Essentials

    Broader source: Energy.gov [DOE]

    The Native Learning Center (NLC) offers tuition FREE courses and trainings to Native Americans and indigenous people with an emphasis on the educational needs of tribal members and their...

  11. Using Ambient Ion Beams to Write Nanostructured Patterns for Surface Enhanced Raman Spectroscopy

    SciTech Connect (OSTI)

    Li, Anyin; Baird, Zane; Bag, Soumabha; Sarkar, Depanjan; Prabhath, Anupama; Pradeep, Thalappil; Cooks, Robert G.

    2014-11-10

    Electrolytic spray deposition was used to pattern surfaces with 2D metallic nanostructures. Spots that contain silver nanoparticles (AgNP) were created by landing solvated silver ions at desired locations using electrically floated masks to focus the metal ions to an area as little as 20 mm in diameter. The AgNPs formed are unprotected and their aggregates can be used for surface-enhanced Raman spectroscopy (SERS). The morphology and SERS activity of the NP structures were controlled by the surface coverage of landed silver ions. The NP structures created could be used as substrates onto which SERS samples were deposited or prepared directly on top of predeposited samples of interest. The evenly distributed hot spots in the micron-sized aggregates had an average SERS enhancement factor of 108. The surfaces showed SERS activity when using lasers of different wavelengths (532, 633, and 785 nm) and were stable in air.

  12. U-041: Google Chrome Out-of-Bounds Write Error Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A remote user can create HTML that, when loaded by the target user, will execute arbitrary code on the target user's system.

  13. Northern Cheyenne Tribe - Wind Power Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Northern Cheyenne Tribe Wind Power Project Program Review 2006 Ingrid Gardner Project Overview * Project began in 2002 * Sole decision maker and final authority » NORTHERN CHEYENNE TRIBE * Technical Participant » Distributed Generation Systems, Inc. * Tribal Participant » TRIBAL EDA COMMITTEE » TRIBAL EDA PLANNER Project Design * Development Phase Approach - Long Term Wind Data Collected »RAWS SITE »AIR QUALITY SITES »ON-SITE MET TOWERS 50 meter tower 20 meter tower Project Design Cont. *

  14. Microsoft Word - Cd-CA.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The First Cadmium Enzyme - Carbonic Anhydrase 2 from the marine diatom Thalassiosira weissflogii Todd W. Lane 1 , Mak A. Saito 2 , Graham N. George 3 , Ingrid J. Pickering 3 , Roger C. Prince 4 and François M.M. Morel 5 1 Biosystems Research Department, Sandia National Labs, Livermore, CA 2 Marine Chemistry and Geochemistry Department, Woods Hole Oceanographic Institution, Woods Hole, MA 3 Department of Geological Sciences, University of Saskatchewan, Saskatoon, Canada 4 ExxonMobil Research

  15. 3-D Mesh Generation Nonlinear Systems

    Energy Science and Technology Software Center (OSTI)

    1994-04-07

    INGRID is a general-purpose, three-dimensional mesh generator developed for use with finite element, nonlinear, structural dynamics codes. INGRID generates the large and complex input data files for DYNA3D, NIKE3D, FACET, and TOPAZ3D. One of the greatest advantages of INGRID is that virtually any shape can be described without resorting to wedge elements, tetrahedrons, triangular elements or highly distorted quadrilateral or hexahedral elements. Other capabilities available are in the areas of geometry and graphics. Exact surfacemore » equations and surface intersections considerably improve the ability to deal with accurate models, and a hidden line graphics algorithm is included which is efficient on the most complicated meshes. The primary new capability is associated with the boundary conditions, loads, and material properties required by nonlinear mechanics programs. Commands have been designed for each case to minimize user effort. This is particularly important since special processing is almost always required for each load or boundary condition.« less

  16. Microsoft Word - Heliostat_Cost_Reduction_Main_Report_v2 _NEW_ 6-6-07.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3293 Unlimited Release Printed June 2007 Heliostat Cost Reduction Study Gregory J. Kolb, Scott A. Jones, Matthew W. Donnelly, David Gorman, Robert Thomas, Roger Davenport, and Ron Lumia Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract

  17. Notice of Ex-Parte Communications | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ex-Parte Communications Notice of Ex-Parte Communications On February 25, 2015, the undersigned along with the following locally elected officials in Wyoming: Mark Christensen (Commissioner, Campbell County, WY), John Kolb (Commissioner, Sweetwater County, WY), Lindy Glode Commissioner, Carbon County, WY) and Carol Seeger (Deputy County attorney, Campbell County, WY) met with Department of Energy (DOE) staff to discuss the above referenced Request for Information. DOE Ex-Parte filing, excess

  18. SAND2010-3364C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Copyright © 2010 by ASME Proceedings of ES2010 Energy Sustainability May 17-22, 2010, Phoenix, Arizona ES2010-90040 FREEZE-THAW TESTS OF TROUGH RECEIVERS EMPLOYING A MOLTEN SALT WORKING FLUID Gregory Kolb Sandia National Laboratories Albuquerque, NM, USA Clifford Ho Sandia National Laboratories Albuquerque, NM, USA Brian Iverson Sandia National Laboratories Albuquerque, NM, USA Timothy Moss Sandia National Laboratories Albuquerque, NM, USA Nathan Siegel Sandia National Laboratories Albuquerque,

  19. Surface relief grating in azo-polymer obtained for s-s polarization configuration of the writing beams

    SciTech Connect (OSTI)

    Sobolewska, Anna; Bartkiewicz, Stanislaw

    2012-11-05

    The paper reports on the formation of the surface relief gratings in thin films of the azobenzene-functionalized polymer. We evidence that the efficiency of the formation process of the surface relief gratings strongly depends on the length of the main polymer chains in the case of the s-s configuration. The explanation of this relationship is given and is based on the revealing of the differences in the ability of the motion of the main chain which is strictly related to its length.

  20. Surface relief grating in azo-polymer obtained for s-s polarization configuration of the writing beams

    SciTech Connect (OSTI)

    Sobolewska, Anna; Bartkiewicz, Stanislaw

    2012-10-29

    The paper reports on the formation of the surface relief gratings in thin films of the azobenzene-functionalized polymer. We evidence that the efficiency of the formation process of the surface relief gratings strongly depends on the length of the main polymer chains in the case of the s-s configuration. The explanation of this relationship is given and is based on the revealing of the differences in the ability of the motion of the main chain which is strictly related to its length.

  1. Synthesis of high T.sub.C superconducting coatings and patterns by melt writing and oxidation of metallic precursor alloys

    DOE Patents [OSTI]

    Gao, Wei; Vander Sande, John B.

    1998-01-01

    A method is provided for fabrication of superconducting oxides and superconducting oxide composites and for joining superconductors to other materials. A coating of a molten alloy containing the metallic elements of the oxide is applied to a substrate surface and oxidized to form the superconducting oxide. A material can be contacted to the molten alloy which is subsequently oxidized joining the material to the resulting superconducting oxide coating. Substrates of varied composition and shape can be coated or joined by this method.

  2. Synthesis of high {Tc} superconducting coatings and patterns by melt writing and oxidation of metallic precursor alloys

    DOE Patents [OSTI]

    Gao, W.; Vander Sande, J.B.

    1998-07-28

    A method is provided for fabrication of superconducting oxides and superconducting oxide composites and for joining superconductors to other materials. A coating of a molten alloy containing the metallic elements of the oxide is applied to a substrate surface and oxidized to form the superconducting oxide. A material can be contacted to the molten alloy which is subsequently oxidized joining the material to the resulting superconducting oxide coating. Substrates of varied composition and shape can be coated or joined by this method. 5 figs.

  3. Undergraduate Students | Photosynthetic Antenna Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Undergraduate Students Undergraduate Students Ingrid Archibald Undergraduate Student E-mail: ingridarchibald@wustl.edu Divya Babbula Undergraduate Student E-mail: divya.babbula@wustl.edu Stephanie Botkin E-mail: stephanie.botkin@wustl.edu Kyle Cepeda Undergraduate Student E-mail: kcepeda@wustl.edu Ryan Farhat-Sabet Undergraduate Student E-mail: r.farhat-sabet@wustl.edu Caroline Focht Undergraduate Student E-mail: caroline.focht@wustl.edu Savannah Fuqua E-mail: savannah.fuqua@wustl.edu Channing

  4. Mapping out Your Science Report | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alley, M. (1997). The Craft of Scientific Writing, 3rd Edition. Springer: New York. A novel by scientific writing expert Michael Alley that explains, among other things, how to begin the writing process, the difference between weak and strong scientific writing, and what it means to write for a target audience. Purdue Online Writing Lab An online resource from Purdue University that offers a comprehensive step-by-step guide on writing, including techniques for brainstorming and overcoming

  5. Aerodyne Research Inc. Wins SBIR/STTR Business of the Year at Small

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Forum & Expo | Department of Energy Aerodyne Research Inc. Wins SBIR/STTR Business of the Year at Small Business Forum & Expo Aerodyne Research Inc. Wins SBIR/STTR Business of the Year at Small Business Forum & Expo October 10, 2014 - 10:01am Addthis Charles Kolb of Aerodyne Research Inc. accepts the SBIR/STTR Business of the Year Award from Kevin Knobloch, DOE Chief of Staff (l), and John Hale III, Director of DOE's Office of Small and Disadvantaged Business Utilization

  6. Project Title

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Storage Research and Development Performing Organizations: Sandia National Laboratories (SNL) Key Technical Contacts: Nathan Siegel (SNL), 505-284-2033, npsiege@sandia.gov Bob Bradshaw (SNL), 925-294-3229, rwbrads@sandia.gov Greg Kolb (SNL), 505-844-1887, gjkolb@sandia.gov David Raymond (SNL), 505-844-8026, dwraymo@sandia.gov Rich Diver (SNL), 505-845-0195, rbdiver@sandia.gov Tim Moss (SNL), 505-845-3366, tamoss@sandia.gov DOE HQ Technology Manager: Thomas Rueckert, 202-586-0942,

  7. The Fermilab Particle Astrophysics Center

    SciTech Connect (OSTI)

    Not Available

    2004-11-01

    The Particle Astrophysics Center was established in fall of 2004. Fermilab director Michael S. Witherell has named Fermilab cosmologist Edward ''Rocky'' Kolb as its first director. The Center will function as an intellectual focus for particle astrophysics at Fermilab, bringing together the Theoretical and Experimental Astrophysics Groups. It also encompasses existing astrophysics projects, including the Sloan Digital Sky Survey, the Cryogenic Dark Matter Search, and the Pierre Auger Cosmic Ray Observatory, as well as proposed projects, including the SuperNova Acceleration Probe to study dark energy as part of the Joint Dark Energy Mission, and the ground-based Dark Energy Survey aimed at measuring the dark energy equation of state.

  8. Electrostatically focused addressable field emission array chips (AFEA's) for high-speed massively parallel maskless digital E-beam direct write lithography and scanning electron microscopy

    DOE Patents [OSTI]

    Thomas, Clarence E.; Baylor, Larry R.; Voelkl, Edgar; Simpson, Michael L.; Paulus, Michael J.; Lowndes, Douglas H.; Whealton, John H.; Whitson, John C.; Wilgen, John B.

    2002-12-24

    Systems and methods are described for addressable field emission array (AFEA) chips. A method of operating an addressable field-emission array, includes: generating a plurality of electron beams from a pluralitly of emitters that compose the addressable field-emission array; and focusing at least one of the plurality of electron beams with an on-chip electrostatic focusing stack. The systems and methods provide advantages including the avoidance of space-charge blow-up.

  9. Bisphenol-A sensors on polyimide fabricated by laser direct writing for on-site river water monitoring at attomolar concentration

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Cheng; Wang, Shutong; Wu, Jayne; Yu, Yongchao; Li, Ruozhou; Eda, Shigetoshi; Feng, Guoying; Chen, Jiangang; Lawrie, Benjamin J.; Hu, Anming

    2016-06-28

    This work presents an aptamer-based, highly sensitive and specific sensor for atto- to femtomolar level detection of bisphenol A (BPA). Because of its widespread use in numerous products, BPA enters surface water from effluent discharges during its manufacture, use, and from waste landfill sites throughout the world. On-site measurement of BPA concentrations in water is important for evaluating compliance with water quality standards or environmental risk levels of the harmful compound in the environment. The sensor in this work is porous, conducting, interdigitated electrodes that are formed by laser-induced carbonization of flexible polyimide sheets. BPA-specific aptamer is immobilized on themore » electrodes as the probe, and its binding with BPA at the electrode surface is detected by capacitive sensing. The binding process is aided by ac electroosmotic effect that accelerates the transport of BPA molecules to the nanoporous graphene-like structured electrodes. The sensor achieved a limit of detection of 58.28 aM with a response time of 20 s. The sensor is further applied for recovery analysis of BPA spiked in surface water. In conclusion, this work provides an affordable platform for highly sensitive, real time, and field-deployable BPA surveillance critical to the evaluation of the ecological impact of BPA exposure.« less

  10. Training | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Training A hand writing the word, "Training," in blue marker. A hand writing the word, "Training," in blue marker.

  11. Better Buildings Residential Network Peer Exchange Call Series...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... But how does that work in the real world? Building overarching memes around our desired outcomes. Writing supporting features with stories embedded. Writing supporting features ...

  12. Input apparatus for dynamic signature verification systems

    DOE Patents [OSTI]

    EerNisse, Errol P.; Land, Cecil E.; Snelling, Jay B.

    1978-01-01

    The disclosure relates to signature verification input apparatus comprising a writing instrument and platen containing piezoelectric transducers which generate signals in response to writing pressures.

  13. 3D Printed Toy | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DirectWriteV Building More Intelligent GE Products with Additive Manufacturing DirectWriteV Innovating Around the Clock to Change the Paradigm of Manufacturing ...

  14. Chapter_8_Opertions_Security_Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for appointing, in writing, a HQ OPSEC Program Manager. The head of each element is responsible for appointing, in writing, both a primary and alternate OPSEC Representative. ...

  15. Halogen eAppraisal - Performance Appraisals | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Halogen eAppraisal - Performance Appraisals 2015 Performance Appraisal Process 211 - 220: Employee writes self-appraisal. 221 - 310: Evaluating Supervisor writes appraisals for...

  16. About EIA - Policies - U.S. Energy Information Administration...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    This Guide helps EIA writers produce consistent, correct, and readable web content. It ... The Guide addresses some issues that are particular to web writing, such as writing ...

  17. Energy Employees Occupational Illness Compensation Program Act...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requests are to be submitted in writing to: Chief Freedom of Information Act Officer U.S. ... of Information and Privacy Act Office in writing to the address above or electronically by ...

  18. Plain Language Training Classes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Plain Language Training Classes Plain Language Training Classes February 18, 2016 7:30AM to 10:30AM MST Plain Language Training Classes When you write, do you write what you want ...

  19. Lawrence Livermore National Laborotory Safety Basis Assessment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Each action item is verified to be complete, and LSO is notified in writing when the plan ... with LSO Work Instruction (WI) 226.1.1, Writing and Managing Contractor Assessments, ...

  20. Microsoft Word - MSA - Theory of Change Logic Model (1).docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    * UNM collaboration Science Professional Development * Kit and Content Training * Fundamentals of inquiry, effective instruction Math and Science Writing PD * Communication, ...

  1. lib debug interpose

    Energy Science and Technology Software Center (OSTI)

    2010-12-13

    libdinterpose is a Linux, C convenience library to assist you in writing interposer libraries to help you debug programs.

  2. Who dunnit. A crash course in style for Sandia authors

    SciTech Connect (OSTI)

    Lopez, L.S.

    1980-07-01

    This report presents a short course for the busy engineer-scientist who wants to write reports that meet minimum standards of modern technical writing. The text stresses some cardinal rules of good writing: personal pronouns, strong verbs, active voice, clear expression, and avoidance of jargon and noun modifiers.

  3. DYNA3D example problem manual

    SciTech Connect (OSTI)

    Lovejoy, S.C.; Whirley, R.G.

    1990-10-10

    This manual describes in detail the solution of ten example problems using the explicit nonlinear finite element code DYNA3D. The sample problems include solid, shell, and beam element types, and a variety of linear and nonlinear material models. For each example, there is first an engineering description of the physical problem to be studied. Next, the analytical techniques incorporated in the model are discussed and key features of DYNA3D are highlighted. INGRID commands used to generate the mesh are listed, and sample plots from the DYNA3D analysis are given. Finally, there is a description of the TAURUS post-processing commands used to generate the plots of the solution. This set of example problems is useful in verifying the installation of DYNA3D on a new computer system. In addition, these documented analyses illustrate the application of DYNA3D to a variety of engineering problems, and thus this manual should be helpful to new analysts getting started with DYNA3D. 7 refs., 56 figs., 9 tabs.

  4. Mental Representations Formed From Educational Website Formats

    SciTech Connect (OSTI)

    Elizabeth T. Cady; Kimberly R. Raddatz; Tuan Q. Tran; Bernardo de la Garza; Peter D. Elgin

    2006-10-01

    The increasing popularity of web-based distance education places high demand on distance educators to format web pages to facilitate learning. However, limited guidelines exist regarding appropriate writing styles for web-based distance education. This study investigated the effect of four different writing styles on readers mental representation of hypertext. Participants studied hypertext written in one of four web-writing styles (e.g., concise, scannable, objective, and combined) and were then administered a cued association task intended to measure their mental representations of the hypertext. It is hypothesized that the scannable and combined styles will bias readers to scan rather than elaborately read, which may result in less dense mental representations (as identified through Pathfinder analysis) relative to the objective and concise writing styles. Further, the use of more descriptors in the objective writing style will lead to better integration of ideas and more dense mental representations than the concise writing style.

  5. Communicating Science | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SULI Report Guidelines CCI Report Guidelines Features of Good Scientific Writing Mapping Out Your Science Report Engaging Your Audience Improving Your Overall Writing Style Writing a General Audience Abstract Guide to Effective Poster Design Guide to PowerPoint Presentations How to Peer Review Improving Your Speaking Skills Planning Your Oral/Poster Presentation Graduates Faculty Partners News & Events About Us Staff Directory About Us Staff Directory Argonne National Laboratory Educational

  6. Compound and Elemental Analysis At Valles Caldera - Redondo Geothermal...

    Open Energy Info (EERE)

    material to write exploration activity summary. References Jamie N. Gardner, Fraser E. Goff, Sammy Garcia, Roland C. Hagan (1986) Stratigraphic Relations and Lithologic Variations...

  7. NREL: Energy Analysis - Matt Rahill

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in information and communications technology, University of Denver, 2015 B.A. in English writing, University of Colorado, Denver, 2008 Prior work experience Communications...

  8. NREL: Energy Analysis - Ann Herlevich Brennan

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    management, decision tools, and Web applications to enable REEE market Communications strategy, technical writing, and outreach Techno-economic analysis of renewable energy...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for the creation of easements for the purpose of maintaining exposure of a solar energy system to sunlight. Easements must be created in writing, and recorded and indexed ......

  10. community

    National Nuclear Security Administration (NNSA)

    for middle school children to use their skills in engineering, planning, writing and art to create a vision for the future, was recently held. Learning about how town...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same conveyancing and...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Process Heat Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same conveyancing...

  13. Covariant functional diffusion equation for Polyakov's bosonic string

    SciTech Connect (OSTI)

    Botelho, L. C. L.

    1989-07-15

    I write a covariant functional diffusion equation for Polyakov's bosonic string with the string's world-sheet area playing the role of proper time.

  14. Employee Spotlight: Dances of India

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jobs Career Stories Employee Spotlight Alina Deshpande Alina Deshpande-Dances of India Lab scientist Alina Deshpande teaches classical Indian dance and writes, produces,...

  15. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Space Heat Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same conveyancing and...

  16. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar Easements Solar easements must be created in writing and are subject to the same conveyancing and instrument recording requirements as other easements. Eligibility:...

  17. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Water Heat Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same...

  18. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Photovoltaics Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same...

  19. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar Easements In Kentucky, solar easements may be obtained for the purpose of ensuring access to direct sunlight. Easements must be expressed in writing and will become an...

  20. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar - Passive Tax Credits, Rebates & Savings Tax Credits, Rebates & Savings Solar Easements Solar easements must be created in writing and are subject to the same conveyancing...

  1. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Solar easements must be created in writing and are subject to the same conveyancing and instrument recording requirements as other easements. Eligibility: Commercial, Industrial,...

  2. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Easements Solar easements must be created in writing and are subject to the same conveyancing and instrument recording requirements as other easements. Eligibility: Commercial,...

  3. ARM - CARES Campaign Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... I truly enjoyed writing about the daily field activities, participants' roles, their instruments, and the scientific issues related to the effects of air pollution on climate ...

  4. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    enter into solar easement contracts for the purpose of ensuring adequate exposure of a solar energy system. An easement must be expressed in writing and recorded with the...

  5. May 5, 2016, FTCP Face to Face Meeting Presentation - Revision...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FEDERAL TECHNICAL CAPABILITY (DOE O 426.1 Chg. 1) Pat Worthington Jeanette Yarrington May 5, 2016 Writing Team * Pat Worthington, EHSS * Jeanette Yarrington, EHSS * David Chaney, ...

  6. Pecharsky talks magnetic refrigeration with Forbes | The Ames...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pecharsky talks magnetic refrigeration with Forbes In a May 6 article, Forbes contributor Hillary Brueck writes about the race to develop magnetic refrigeration and interviewed...

  7. Solar Easements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    solar easements for the purpose of protecting and maintaining proper access to sunlight. Easements must be executed in writing and are subject to the same conveyance and...

  8. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    solar easements may be obtained for the purpose of ensuring access to direct sunlight. Easements must be expressed in writing and will become an interest in real property...

  9. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    solar easements for the purpose of protecting and maintaining proper access to sunlight. Easements must be executed in writing and are subject to the same conveyance and...

  10. CHRIS Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Funding Resources Proposal Writing Resources Selected Web Resources for Community Assessment and Planning Selected Web Resources for Program Development and Evaluation Training ...