National Library of Energy BETA

Sample records for world refining industry

  1. Changing structure of the world refining industry: implications for the United States and other major consuming regions

    SciTech Connect (OSTI)

    Not Available

    1985-02-01

    There are five chapters in this publication. Chapter I on refining industry in transition covers refining history highlights, and OPEC's downstream operations. Chapter II on demand for oil and oil products discusses supply and demand for OPEC oil, demand for oil products, historical growth trends, future growth trends and the case of East Asia - emergence of a fuel oil glut. Chapter III on the US and other traditional refining centers begins with an introduction on the structure of refining and continues on to cover the refining industry in OECD countries, USA, Western Europe, Japan, Singapore and Caribbean and closes with some conclusions. Chapter IV is on refining expansions in OPEC and the third World Nations. The following are covered: (1) nations of the Gulf (Saudi Arabia, Kuwait, Iran, Iraq, Bahrain, Qatar, Oman, United Arab Emirates); (2) OPEC members beyond the Gulf (Indonesia, Africa, Libya, Algeria, Nigeria and Gabon, South America, Venezuela); (3) other major exporters (China, Egypt, Malaysia, Mexico); (4) non-OPEC developing countries - trends in the refining sector. The chapter ends with a short summary on capacity prospects and comparative economics. The final chapter has conclusions and recommendations on: price interactions between crude and products; product exports - impact on OPEC's internal; prices and market influence; importers and exporters - decisions; and course of action of the United States. 18 figures, 40 tables.

  2. ITP Petroleum Refining: Profile of the Petroleum Refining Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (November 2007) ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Profile of the Petroleum Refining Industry in...

  3. The US petroleum refining industry in the 1980's

    SciTech Connect (OSTI)

    Not Available

    1990-10-11

    As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.

  4. Europe`s refining industry woes detailed at London meeting

    SciTech Connect (OSTI)

    Rhodes, A.

    1996-12-09

    Refiners, catalyst producers, engineering firms, and process licensers discussed Europe`s refining industry at the first-ever European Refining Technology Conference, October 28--30, London. Some 400 attendees heard presentations on European Union (EU) environmental legislation, and a variety of processing and catalyst options available to help refiners comply with the regulations. The conference consisted of two parallel sessions: one covering heavy-ends conversion and a second covering hydroprocessing and other light-ends processes. Each session included nine technical presentations, and a panel discussion in which 12 panelists answered presubmitted questions. The heavy-ends technical presentations covered topics including: fluid catalytic cracking (FCC) technology and catalysts, bottoms upgrading options, deep-cut distillation techniques, and gasification. The light-ends papers discussed: European air and fuels qualities, catalytic reforming, hydrotreating, biocatalytic desulfurization, hydrocracking, dewaxing, alkylation, and etherification.

  5. Off-balance-sheet financing to the refining industry

    SciTech Connect (OSTI)

    Jenkins, J.H. [Pace Consultants Inc., Houston, TX (United States)

    1995-09-01

    Off-balance-sheet lending, or project finance, is becoming an increasingly popular means of capital formation in the refining and petrochemical industries. However, these transactions are substantially different from traditional corporate lending, and the demands placed on the borrower to examine, substantiate, and support the project are far greater. The following paper examines ways in which international banks and other lenders evaluate off-balance-sheet refinery projects and suggests ways to better structure financial representations.

  6. Federal/Industry Development of Energy-Conserving Technologies for the Chemical and Petroleum Refining Industries 

    E-Print Network [OSTI]

    Alston, T. G.; Humphrey, J. L.

    1981-01-01

    Argonne National Laboratory has started a program to identify future RD&D projects that (i) promise cost-effective savings of scarce fuels in the chemical and petroleum refining industries, (ii) are not likely to be pursued by industry alone...

  7. Changing Trends in the Refining Industry (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01

    There have been some major changes in the U.S. refining industry recently, prompted in part by a significant decline in the quality of imported crude oil and by increasing restrictions on the quality of finished products. As a result, high-quality crudes, such as the West Texas Intermediate (WTI) crude that serves as a benchmark for oil futures on the New York Mercantile Exchange (NYMEX), have been trading at record premiums to the OPEC (Organization of the Petroleum Exporting Countries) Basket price.

  8. Cogeneration handbook for the petroleum refining industry. [Contains glossary

    SciTech Connect (OSTI)

    Fassbender, L.L.; Garrett-Price, B.A.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

    1984-03-01

    The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the petroleum refining industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

  9. Energy Efficiency Improvement in the Petroleum Refining Industry

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    and product flows. Energy Use in Petroleum Refining The2. Estimated energy use by petroleum refining process.EIA), 2002. Petroleum Supply Annual 2001, Energy Information

  10. Aspects of Western Refining, Inc.'s Proposed Acquisition of Giant Industries, Inc.

    Reports and Publications (EIA)

    2006-01-01

    Presentation of company-level, non-proprietary data and relevant aggregate data for U.S. refinery capacity and gasoline marketing of Western Refining and Giant Industries to inform discussions of Western Refining Inc.'s proposed acquisition of Giant Industries Inc. for a total of $1.5 billion, which was announced August 28, 2006.

  11. Gasification world database 2007. Current industry status

    SciTech Connect (OSTI)

    NONE

    2007-10-15

    Information on trends and drivers affecting the growth of the gasification industry is provided based on information in the USDOE NETL world gasification database (available on the www.netl.doe.gov website). Sectors cover syngas production in 2007, growth planned through 2010, recent industry changes, and beyond 2010 - strong growth anticipated in the United States. A list of gasification-based power plant projects, coal-to-liquid projects and coal-to-SNG projects under consideration in the USA is given.

  12. Industrial Ecology and LCA, Instructor Iddo Wernick Fall 2014 Syllabus (subject to refinement/updating)

    E-Print Network [OSTI]

    Wolberg, George

    Industrial Ecology and LCA, Instructor Iddo Wernick Fall 2014 Syllabus (subject to refinement/updating) 1 SUS-7300C INDUSTRIAL ECOLOGY AND LIFE CYCLE ANALYSIS Description: Students will be introduced to the purpose, philosophy, and applications of Industrial Ecology as they affect environmental and urban

  13. Adjustable Speed Drives in the U.S. Petroleum Refining, Petrochemical, and Chemical Industries 

    E-Print Network [OSTI]

    Foley, D. J.; Chodorowski, A.

    1993-01-01

    This paper describes applications and incentives for the use of variable frequency drivers (VFD) in the petroleum refining, petrochemical, and chemical industries. VFDs are a particular type of adjustable speed driver (ASD) found prevalently...

  14. Energy and Environmental Profile of the U.S. Petroleum Refining Industry

    SciTech Connect (OSTI)

    Pellegrino, Joan; Brueske, Sabine; Carole, Tracy; Andres, Howard

    2007-11-01

    This 2007 report provides an overview of the U.S. petroleum refining industry, including new data on market trends and energy and material consumption, as well as information on environmental performance.

  15. World Congress on Industrial Biotechnology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    World Congress on Industrial Biotechnology World Congress on Industrial Biotechnology July 19, 2015 2:00PM EDT to July 22, 2015 2:00PM EDT Montreal Convention Center 1001 Place...

  16. An Assessment of carbon reduction technology opportunities in the petroleum refining industry.

    SciTech Connect (OSTI)

    Petrick, M.

    1998-09-14

    The refining industry is a major source of CO{sub 2} emissions in the industrial sector and therefore in the future can expect to face increasing pressures to reduce emission levels. The energy used in refining is impacted by market dictates, crude quality, and environmental regulations. While the industry is technologically advanced and relatively efficient opportunities nevertheless exist to reduce energy usage and CO{sub 2} emissions. The opportunities will vary from refinery to refinery and will necessarily have to be economically viable and compatible with each refiner's strategic plans. Recognizing the many factors involved, a target of 15-20% reduction in CO{sub 2} emissions from the refining sector does not appear to be unreasonable, assuming a favorable investment climate.

  17. ITP Petroleum Refining: Profile of the Petroleum Refining Industry in California: California Industries of the Future Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    The U.S. Department of Energy (DOE) Industrial Technologies Program (ITP) established the Industries of the Future (IOF) program to increase energy efficiency, reduce waste production and to improve competitiveness, currently focusing on nine sectors.

  18. World Energy Projection System Plus Model Documentation: Industrial Model

    Reports and Publications (EIA)

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Industrial Model (WIM). It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  19. The effects of air pollution regulations on the US refining industry. Task 3

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    Numerous air pollution regulations affecting petroleum refineries recently have been promulgated, have been proposed, or are under consideration at the federal, state, and local level. As shown in Figure ES-1, all of these environmental regulations are intended to take effect over the relatively short time period from 1989 through 1995. In the aggregate these regulatory activities have significant implications for the US refining industry and the Nation, including: Major investment requirements; changes in industry profitability; potential closure of some refineries; and potential changes in crude oil or product import dependence. At issue is whether the cumulative effect of these regulations could so adversely affect the US refining industry that US national security would be affected. In addition to the regulations outlined in Figure ES-1, President Bush recently presented a major new plan to improve the nation`s air quality. The aspects of the President`s plan that could strongly affect US refineries are summarized below.

  20. Steam system opportunity assessment for the pulp and paper, chemical manufacturing, and petroleum refining industries: Main report

    SciTech Connect (OSTI)

    None, None

    2002-10-01

    This report assesses steam generation and use in the pulp and paper, chemical, and petroleum refining industries, and estimates the potential for energy savings from implementation of steam system performance and efficiency improvements.

  1. From Antiquity to the Pre-Industrial World Archaeology, Technology

    E-Print Network [OSTI]

    Cantlon, Jessica F.

    and interdepartmental · Integrates archaeology,architecture,classics,art history,history of technology,and engineeringFrom Antiquity to the Pre-Industrial World Archaeology, Technology and Historical Structures of History, Chair,History Joan Saab, Associate Professor of Art and Art History, Chair, Art and Art History

  2. Impact of growing Asian markets on the world oil industry

    SciTech Connect (OSTI)

    Manning, T.J. [Purvin and Gertz, Inc., Houston, TX (United States); Vautrain, J.H. [Purvin and Gertz, Inc., Los Angeles, CA (United States); Adair, P. [Purvin and Gertz, Inc., Singapore (Singapore)

    1996-12-01

    The focus of world petroleum activity has largely shifted from the industrialized OPEC nations to the rapidly developing countries of Asia where new refinery ventures, marketing operations, and trading offices have proliferated. Asia consumed 22% of the world`s petroleum in 1985, but rapid growth in the past decade has raised its share to over 30%. Demand in Asia has grown by an average of 550,000 B/D each year since 1985, accounting for 80% of the world`s total growth in demand. The robust demand growth envisioned for the 1990s cannot last indefinitely. The key factor restricting growth will be the world`s capacity to produce crude oil, which they believe will begin to approach sustainable limits after 2000. When those limits are reached, another oil price shock is likely, and another cycle of conservation and substitution will begin. If growth were to continue at the high rates of the 1990s, crude availability limits would be reached early in the next century. In this paper, they have presented a soft landing path for demand, production, and pricing. They project a gradual slowdown in demand growth, in response to a gradual increase in real crude oil prices. In the real world, a much rougher path is likely, even though both paths start and end at the same point.

  3. EIA model documentation: World oil refining logistics demand model,``WORLD`` reference manual. Version 1.1

    SciTech Connect (OSTI)

    Not Available

    1994-04-11

    This manual is intended primarily for use as a reference by analysts applying the WORLD model to regional studies. It also provides overview information on WORLD features of potential interest to managers and analysts. Broadly, the manual covers WORLD model features in progressively increasing detail. Section 2 provides an overview of the WORLD model, how it has evolved, what its design goals are, what it produces, and where it can be taken with further enhancements. Section 3 reviews model management covering data sources, managing over-optimization, calibration and seasonality, check-points for case construction and common errors. Section 4 describes in detail the WORLD system, including: data and program systems in overview; details of mainframe and PC program control and files;model generation, size management, debugging and error analysis; use with different optimizers; and reporting and results analysis. Section 5 provides a detailed description of every WORLD model data table, covering model controls, case and technology data. Section 6 goes into the details of WORLD matrix structure. It provides an overview, describes how regional definitions are controlled and defines the naming conventions for-all model rows, columns, right-hand sides, and bounds. It also includes a discussion of the formulation of product blending and specifications in WORLD. Several Appendices supplement the main sections.

  4. Petroleum refining industry of developed capitalist countries in the 1990s

    SciTech Connect (OSTI)

    Prokhorova, A.A.

    1994-07-01

    Crude oil is the principal source of energy today and in the immediate future. The increases in the consumption of crude oil (1.7% per year up to 2005) will be offset mainly by additional supplies from the countries of the Near East. Data on the imports of oil by the developed capitalists countries are presented in Table 2. In the United States, according to a projection made by Conoco, by the year 2000 the volume of imports will be twice the volume of domestic production; according to another prediction, the amount of Near East crude will increase from 34% in 1990 to 42% in 2000. Since the mid-1980s, the energy policy of the USA has been based on importing so-called cheap crude. Laws have been passed to mandate not only energy saving, but also cuts in the oil and gas production on U.S. territory. The volume of U.S. oil production will be 20% lower in 2000 than in 1990. Some 90% of the worldwide demand for oil is met by light and medium-density crudes, but such crudes account for only 25% of the oil resources. Projections indicate that the oil supplied to refiners in the future will be heavier and will have higher sulfur contents. The U.S. production of low-sulfur crude will drop off sharply in the next 10-15 years. The drop in oil production of the CIS [former USSR] and the consequent drop in exports from these countries will have a destabilizing effect on the world market. The average price of the {open_quotes}market basket{close_quotes} of OPEC crudes in 1991 was $149/ton (in 1990 $178/ton), in comparison with a 1992 price of $148/ton. This report presents data on refining process capacities and the ratio of secondary capacity to primary distillation capacity.

  5. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    in the Pulp and Paper Industry: An Energy Benchmarkingin the Pulp and Paper Industries. Integrated Pollutionin the Pulp and Paper Industry: An Energy Benchmarking

  6. Projections of the impact of expansion of domestic heavy oil production on the U.S. refining industry from 1990 to 2010. Topical report

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Strycker, A.R.; Guariguata, G.; Salmen, F.G.

    1994-12-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil (10{degrees} to 20{degrees} API gravity) production. This report provides a compendium of the United States refining industry and analyzes the industry by Petroleum Administration for Defense District (PADD) and by ten smaller refining areas. The refining capacity, oil source and oil quality are analyzed, and projections are made for the U.S. refining industry for the years 1990 to 2010. The study used publicly available data as background. A linear program model of the U.S. refining industry was constructed and validated using 1990 U.S. refinery performance. Projections of domestic oil production (decline) and import of crude oil (increases) were balanced to meet anticipated demand to establish a base case for years 1990 through 2010. The impact of additional domestic heavy oil production, (300 MB/D to 900 MB/D, originating in select areas of the U.S.) on the U.S. refining complex was evaluated. This heavy oil could reduce the import rate and the balance of payments by displacing some imported, principally Mid-east, medium crude. The construction cost for refining units to accommodate this additional domestic heavy oil production in both the low and high volume scenarios is about 7 billion dollars for bottoms conversion capacity (delayed coking) with about 50% of the cost attributed to compliance with the Clean Air Act Amendment of 1990.

  7. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    Cost Reduction in the Pulp and Paper Industry: An EnergyTechniques in the Pulp and Paper Industries. IntegratedCost Reduction in the Pulp and Paper Industry: An Energy

  8. ITP Petroleum Refining: Energy and Environmental Profile of the...

    Energy Savers [EERE]

    Profile of the U.S. Petroleum Refining Industry (November 2007) Bandwidth Study U.S. Petroleum Refining ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry...

  9. Rate of Industrial Conservation - Petroleum Refining, Chemicals and Pulp and Paper Manufacture 

    E-Print Network [OSTI]

    Prengle, H. W. Jr.; Golden, S. A.

    1979-01-01

    This paper considers three related questions: 1) What are the primary economic driving forces which determine the rate of industrial energy conservation? 2) How much industrial energy conservation has been achieved over 1972-1973 levels? 3) What...

  10. TECHNICAL PUBLICATIONS & BOOKS PRESENTED/PUBLISHED GOMES J.S. & ALVES, F.B. (2013): "The Universe of the Oil & Gas Industry From Exploration to Refining", 780

    E-Print Network [OSTI]

    Williams, John M.

    2013-01-01

    Universe of the Oil & Gas Industry ­ From Exploration to Refining", 780 pages University textbook published by PARTEX Oil & Gas, Lisbon, Portugal. ISBN 9789892037783. GOMES J.S. (2012): "New Technologies in the Oil and Gas Industry", edited by J.S. Gomes, published by INTECH open science (www

  11. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    for Carbon: How to Reduce Energy Usage through Automation,”10  Conceptual Framework for Energy?Usage industry in regards to energy usage and emissions. Required

  12. World Congress on Industrial Process Tomography, Aizu, Japan Modelling and predicting flow regimes using wavelet

    E-Print Network [OSTI]

    Barber, Stuart

    4 th World Congress on Industrial Process Tomography, Aizu, Japan Modelling and predicting flow of Statistics, University of Leeds, Leeds, LS2 9JT, UK, robert@maths.leeds.ac.uk ABSTRACT The aim of industrial without intruding into the industrial process, but produce highly correlated and noisy data, and hence

  13. Classification of urban & industrial soils in the World Reference Base for Soil Resources

    E-Print Network [OSTI]

    Classification of urban & industrial soils in the World Reference Base for Soil Resources: Working, Industrial, Traffic and Mining Areas (SUITMA) of the International Union of Soil Science (IUSS), 09­11 July . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Urban and industrial soils in the current WRB 4 3.1 Natural Soils

  14. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    1 2. World Best Practice Energy IntensityBrussels: IISI. Best practice energy use is also determinedalong with the best practice energy intensity value for

  15. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    Best Practice Final and Primary Energy Intensity Values forWorld Best Practice Primary Energy Intensity Values forRecovered Pulp Note: Primary energy includes electricity

  16. Transforming the "world factory" : designing for a [post]industrial Shenzhen

    E-Print Network [OSTI]

    Zou, Mingxi

    2014-01-01

    China has been known as the "world factory" ever since it opened up to the global economy. This has led to a vastly sprawled, monotonous industrial urbanism, where urban environment has become a spatial product rather than ...

  17. Document: P1332 Category: Physical Sciences, Chemical/Materials License Status: Available for licensing Texas Industry Cluster: Petroleum Refining & Chemical Products

    E-Print Network [OSTI]

    Lightsey, Glenn

    Description This technology describes an inexpensive, metallic, non-platinum-based fuel cell electrocatalyst for licensing Texas Industry Cluster: Petroleum Refining & Chemical Products Lower-cost fuel cells Problem The advantages of fuel-cell use are compelling. Fuel cells are cleaner and safer for the environment

  18. Demand for petrochem feedstock to buoy world LPG industry

    SciTech Connect (OSTI)

    Not Available

    1992-05-18

    This paper reports that use of liquefied petroleum gas as petrochemical feedstock will increase worldwide, providing major growth opportunities for LPG producers. World exports of liquefied petroleum gas will increase more slowly than production as producers choose to use LPG locally as chemical feedstock and export in value added forms such as polyethylene. So predicts Poten and Partners Inc., New York. Poten forecasts LPG production in exporting countries will jump to 95 million tons in 2010 from 45 million tons in 1990. However, local and regional demand will climb to 60 million tons/year from 23 million tons/year during the same period. So supplies available for export will rise to 35 million tons in 2010 from 22 million tons in 1990.

  19. Extractive industries and sustainable development: an evaluation of World Bank Group experience

    SciTech Connect (OSTI)

    Andres Liebenthal; Roland Michelitsch; Ethel Tarazona

    2005-07-01

    How effectively has the World Bank Group assisted its clients in enhancing the contribution of the extractive industries to sustainable development? (Extractive industries include oil, gas, and mining of minerals including coals and metals.) This evaluation finds that with its global mandate and experience, comprehensive country development focus, and overarching mission to fight poverty, the World Bank Group is well positioned to help countries overcome the policy, institutional, and technical challenges that prevent them from transforming resource endowments into sustainable benefits. Furthermore, the World Bank Group's achievements are many. On the whole, its extractive industries projects have produced positive economic and financial results, though compliance with its environmental and social safeguards remains a challenge. Its research has broadened and deepened understanding of the causes for the disappointing performance of resource-rich countries. Its guidelines for the mitigation of adverse environmental and social impacts have been widely used and appreciated. More recently, it has begun to address the challenge of country governance with a variety of instruments. The World Bank Group can, however, do much to improve its performance in enhancing the extractive industry sector's contribution to sustainable development and poverty reduction. The report identifies three main areas for improvement - formulating an integrated strategy, strengthening implementation and engagement of stakeholders. 5 annexes.

  20. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    refining, metal casting, and steel making. Of these industrial sectors, petroleum refineries are one of the largest consumers of energy and the United States is the largest...

  1. International LNG report/Developments proceed slowly in world LNG industry

    SciTech Connect (OSTI)

    Hale, D.

    1980-03-01

    A discussion of developments in the world LNG industry covers U.S. developments, including the Pipeline Safety Act of 1979, the National Fire Protection Association's 1979 edition of Standard 59A for the production, storage, and handling of LNG, and progress in the permitting of major LNG import projects changes in U.S. rules on LNG pricing; LNG accidents, including the grounding of the LNG carrier Vertical BarEl Paso Paul Kaise.

  2. 4 th World Congress on Industrial Process Tomography, Aizu, Japan Modelling and predicting flow regimes using wavelet

    E-Print Network [OSTI]

    Aykroyd, Robert G.

    4 th World Congress on Industrial Process Tomography, Aizu, Japan Modelling and predicting flow of Statistics, University of Leeds, Leeds, LS2 9JT, UK, robert@maths.leeds.ac.uk ABSTRACT The aim of industrial without intruding into the industrial process, but produce highly correlated and noisy data, and hence

  3. Estimates of future regional heavy oil production at three production rates--background information for assessing effects in the US refining industry

    SciTech Connect (OSTI)

    Olsen, D.K.

    1993-07-01

    This report is one of a series of publications from a project considering the feasibility of increasing domestic heavy oil (10{degree} to 20{degree} API gravity inclusive) production being conducted for the US Department of Energy. The report includes projections of future heavy oil production at three production levels: 900,000; 500,000; and 300,000 BOPD above the current 1992 heavy oil production level of 750,000 BOPD. These free market scenario projections include time frames and locations. Production projections through a second scenario were developed to examine which heavy oil areas would be developed if significant changes in the US petroleum industry occurred. The production data helps to define the possible constraints (impact) of increased heavy oil production on the US refining industry (the subject of a future report). Constraints include a low oil price and low rate of return. Heavy oil has high production, transportation, and refining cost per barrel as compared to light oil. The resource is known, but the right mix of technology and investment is required to bring about significant expansion of heavy oil production in the US.

  4. World first in high level waste vitrification - A review of French vitrification industrial achievements

    SciTech Connect (OSTI)

    Brueziere, J.; Chauvin, E. [AREVA, 1 place Jean Millier, 92084 Paris La Defense (France); Piroux, J.C. [Joint Vitrification Laboratory - LCV, Marcoule, BP171, 30207 Bagnols sur Ceze (France)

    2013-07-01

    AREVA has more than 30 years experience in operating industrial HLW (High Level radioactive Waste) vitrification facilities (AVM - Marcoule Vitrification Facility, R7 and T7 facilities). This vitrification technology was based on borosilicate glasses and induction-heating. AVM was the world's first industrial HLW vitrification facility to operate in-line with a reprocessing plant. The glass formulation was adapted to commercial Light Water Reactor fission products solutions, including alkaline liquid waste concentrates as well as platinoid-rich clarification fines. The R7 and T7 facilities were designed on the basis of the industrial experience acquired in the AVM facility. The AVM vitrification process was implemented at a larger scale in order to operate the R7 and T7 facilities in-line with the UP2 and UP3 reprocessing plants. After more than 30 years of operation, outstanding record of operation has been established by the R7 and T7 facilities. The industrial startup of the CCIM (Cold Crucible Induction Melter) technology with enhanced glass formulation was possible thanks to the close cooperation between CEA and AREVA. CCIM is a water-cooled induction melter in which the glass frit and the waste are melted by direct high frequency induction. This technology allows the handling of highly corrosive solutions and high operating temperatures which permits new glass compositions and a higher glass production capacity. The CCIM technology has been implemented successfully at La Hague plant.

  5. ITP Petroleum Refining: Impacts of Condition Assessment on Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Effective Fouling Minimization Increases the Efficiency and Productivity of Refineries ITP Petroleum Refining: Profile of the Petroleum Refining Industry in California:...

  6. Linkages between the markets for crude oil and the markets for refined products

    SciTech Connect (OSTI)

    Didziulis, V.S.

    1990-01-01

    To understand the crude oil price determination process it is necessary to extend the analysis beyond the markets for petroleum. Crude oil prices are determined in two closely related markets: the markets for crude oil and the markets for refined products. An econometric-linear programming model was developed to capture the linkages between the markets for crude oil and refined products. In the LP refiners maximize profits given crude oil supplies, refining capacities, and prices of refined products. The objective function is profit maximization net of crude oil prices. The shadow price on crude oil gives the netback price. Refined product prices are obtained from the econometric models. The model covers the free world divided in five regions. The model is used to analyze the impacts on the markets of policies that affect crude oil supplies, the demands for refined products, and the refining industry. For each scenario analyzed the demand for crude oil is derived from the equilibrium conditions in the markets for products. The demand curve is confronted with a supply curve which maximizes revenues providing an equilibrium solution for both crude oil and product markets. The model also captures crude oil price differentials by quality. The results show that the demands for crude oil are different across regions due to the structure of the refining industries and the characteristics of the demands for refined products. Changes in the demands for products have a larger impact on the markets than changes in the refining industry. Since markets for refined products and crude oil are interrelated they can't be analyzed individually if an accurate and complete assessment of a policy is to be made. Changes in only one product market in one region affect the other product markets and the prices of crude oil.

  7. World Best Practice Energy Intensity Values for SelectedIndustrial Sectors

    SciTech Connect (OSTI)

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky,Christina; Zhou, Nan

    2007-06-05

    "World best practice" energy intensity values, representingthe most energy-efficient processes that are in commercial use in atleast one location worldwide, are provided for the production of iron andsteel, aluminium, cement, pulp and paper, ammonia, and ethylene. Energyintensity is expressed in energy use per physical unit of output for eachof these commodities; most commonly these are expressed in metric tonnes(t). The energy intensity values are provided by major energy-consumingprocesses for each industrial sector to allow comparisons at the processlevel. Energy values are provided for final energy, defined as the energyused at the production facility as well as for primary energy, defined asthe energy used at the production facility as well as the energy used toproduce the electricity consumed at the facility. The "best practice"figures for energy consumption provided in this report should beconsidered as indicative, as these may depend strongly on the materialinputs.

  8. Refiners get petchems help

    SciTech Connect (OSTI)

    Wood, A.; Cornitius, T.

    1997-06-11

    The U.S.Refining Industry is facing hard times. Slow growth, tough environmental regulations, and fierce competition - especially in retail gasoline - have squeezed margins and prompted a series of mergers and acquisitions. The trend has affected the smallest and largest players, and a series of transactions over the past two years has created a new industry lineup. Among the larger companies, Mobil and Amoco are the latest to consider a refining merger. That follows recent plans by Ashland and Marathon to merge their refining businesses, and the decision by Shell, Texaco, and Saudi Aramco to combine some U.S. operations. Many of the leading independent refiners have increased their scale by acquiring refinery capacity. With refining still in the doldrums, more independents are taking a closer look at boosting production of petrochemicals, which offer high growth and, usually, better margins. That is being helped by the shift to refinery processes that favor the increased production of light olefins for alkylation and the removal of aromatics, providing opportunity to extract these materials for the petrochemical market. 5 figs., 3 tabs.

  9. Rietveld Refinement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    profile Chi-squared value 4.944 Progress so far Inverse Modeling Method 2 Fourier Method Data Model Refined Structure 40 60 80 100 120 140 160 0 1000 2000 3000 4000...

  10. World population growth, industrialization, energy demand, and environmental goals are presently driving rapid global change in emissions with complex conse-

    E-Print Network [OSTI]

    Mauzerall, Denise

    395 World population growth, industrialization, energy demand, and environmental goalsPollution Intercontinental transport of pollution between Asia, North America, and Europe takes place via the prevailing with lifetimes longer than a month are best addressed from that perspective. Mercury has long been recognized

  11. Worldwide refining

    SciTech Connect (OSTI)

    NONE

    1995-12-18

    Data are presented on refining capacity by country and by company within each country. Capacity data are divided into the following processes: vacuum distillation, thermal operations, catalytic cracking, catalytic reforming, catalytic hydrocracking, catalytic hydrorefining, and catalytic hydrotreating. Production capacity is divided into: alkylation/polymerization/dimerization; aromatics/isomerization; lubricants; oxygenates; hydrogen; petroleum coke; and asphalts.

  12. Carbon Emissions: Petroleum Refining Industry

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet)Decade Year-0ProvedDecade2,948California (MillionThousandChemicalsPaper

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    Planta- tion Products and Paper Industry Council, Paper Industry, Confederationof European Paper Industries, Brussels, March 2001. CESP,

  14. ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Aluminum Vision is intended to stimulate a wide variety of R&D activities to accelerate technology development throughout industry.

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    Refining Cement Membrane separation Refinery gas Natural gasgas pressure Charcoal recovery, Byproduct gas combined cycle Scrap High strength steel Non-Ferrous Metals Chemicals Scrap Membrane separations,

  16. World-Class Energy Assessments: Industrial Action Plans for Greater and More Durable Energy Cost Control 

    E-Print Network [OSTI]

    Russell, C.

    2007-01-01

    This report summarizes recommendations for improving the impact of industrial energy assessments. This initiative responds to the observation that less than half of recommended energy improvements are implemented as a result of traditional...

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    for the European Pulp and Paper Industry, Confederation ofin food and pulp and paper industry wastes, turbines tocement, and pulp and paper industries and in the control of

  18. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    as cover gas for casting the primary metal into ingots andsmelting, metal refining, rolling and casting. For most non-Casting CO 2 – Electricity CO 2 – Other steps in the production process All other Non-Ferrous-Metals

  19. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    14 pp. IEA, 2006c: World Energy Outlook 2006. Internationalan extrapolation of its World Energy Outlook 2005 ReferenceCO 2 gases The IEA’s World Energy Outlook 2006 (IEA, 2006c)

  20. Survey Questionnaire on Environmental Management Practices: Summary of Results by Industry and practices

    E-Print Network [OSTI]

    Delmas, Magali A; Toffel, Michael W.

    2008-01-01

    External Internal Metals Paper Industry Figure 5: AverageUtilities Refining Industry Paper Metals MachineryUtilities Refining Industry Paper Metals Machinery

  1. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    pp. IEA, 2006b: Industrial motor systems energy efficiency:industrial energy efficiency. Presented at Energy Efficiency in Motorenergy-efficient electric motors and motor-systems. These include: (1) industrial

  2. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    and waste management that take place within industrialpolicies Waste management policies can reduce industrialWaste management policies.56 7.10 Co-benefits of industrial

  3. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    R.R. ,et al. , 2004: Eco-industrial park initiatives in theCHP plant) form an eco-industrial park that serves as an ex-

  4. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    cement and pulp and paper industries in China, and in thePulp and Paper Industry, Confederation of European Paper Industries, Brussels, March 2001. CESP, 2004: China’pulp and paper industries (GOI, 2005). There are 39.8 million SMEs in China,

  5. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    specified in the ‘Energy Technology List’ during the yearenergy consumers in the chemical industry, and list examples of technology

  6. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    disposal routes, several countries have set incen- tives to promote the use of various wastes in industrial processes in direct

  7. ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bandwidth for Petroleum Refining Processes ITP Petroleum Refining: Energy Bandwidth for Petroleum Refining Processes bandwidth.pdf More Documents & Publications ITP Petroleum...

  8. MECS 2006- Petroleum Refining

    Broader source: Energy.gov [DOE]

    Manufacturing Energy and Carbon Footprint for Petroleum Refining (NAICS 324110) Sector with Total Energy Input, October 2012 (MECS 2006)

  9. Applications of Genome-based Science in Shaping Citrus Industries of the World (JGI Seventh Annual User Meeting, 2012: Genomics of Energy and Environment)

    ScienceCinema (OSTI)

    Gmitter Jr, Fred [University of Florida

    2013-01-15

    Fred Gmitter from the University of Florida on "Applications of Genome-based Science in Shaping the Future of the World's Citrus Industries" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, California.

  10. Applications of Genome-based Science in Shaping Citrus Industries of the World (JGI Seventh Annual User Meeting, 2012: Genomics of Energy and Environment)

    SciTech Connect (OSTI)

    Gmitter Jr, Fred [University of Florida

    2012-03-21

    Fred Gmitter from the University of Florida on "Applications of Genome-based Science in Shaping the Future of the World's Citrus Industries" at the 7th Annual Genomics of Energy & Environment Meeting on March 21, 2012 in Walnut Creek, California.

  11. The field of finance is abundant with rewarding opportunities in a wide range of industries. By focusing on real-world cases and applied

    E-Print Network [OSTI]

    Westfall, Peter H.

    The field of finance is abundant with rewarding opportunities in a wide range of industries. By focusing on real-world cases and applied problems, students in the Area of Finance are prepared to become, consulting or corporate finance, our graduates hit the ground running with the skills needed to become

  12. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    of its electricity requirements in the USA (US DOE, 2002)USA, where motor-driven systems account for 63% of industrial electricity

  13. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    increased use of biomass and energy efficiency improvements,Moreira, J. , 2006: Global biomass energy potential. Journal1971–2004 Notes 1) Biomass energy included 2) Industrial

  14. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    of Industrial Electrical Switchgear and Control Gear in the6 from use in electrical switchgear and magnesium processinggas insulated electrical switchgear, during the production

  15. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    options for combined heat and power in Canada. Office ofpolicies to promote combined heat and power in US industry.conversions, such as combined heat and power and coke ovens,

  16. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    iron and steel production. IEA Greenhouse Gas R&D Programme,tempera- ture range. IEA/Caddet, Sittard, The Netherlands.industry. Cheltenham, UK, IEA Greenhouse Gas R&D Programme,

  17. Industry

    E-Print Network [OSTI]

    Bernstein, Lenny

    2008-01-01

    developing countries, like India, adoption of efficient electricitydeveloping countries the sugar in- dustry uses bagasse and the edible oils industry uses byproduct wastes to generate steam and/or electricity (

  18. Industry

    SciTech Connect (OSTI)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of industrial mitigation for sustainable development is discussed in Section 7.7. Section 7.8 discusses the sector's vulnerability to climate change and options for adaptation. A number of policies have been designed either to encourage voluntary GHG emission reductions from the industrial sector or to mandate such reductions. Section 7.9 describes these policies and the experience gained to date. Co-benefits of reducing GHG emissions from the industrial sector are discussed in Section 7.10. Development of new technology is key to the cost-effective control of industrial GHG emissions. Section 7.11 discusses research, development, deployment and diffusion in the industrial sector and Section 7.12, the long-term (post-2030) technologies for GHG emissions reduction from the industrial sector. Section 7.13 summarizes gaps in knowledge.

  19. Hawaii energy strategy project 2: Fossil energy review. Task 1: World and regional fossil energy dynamics

    SciTech Connect (OSTI)

    Breazeale, K.; Isaak, D.T.; Yamaguchi, N.; Fridley, D.; Johnson, C.; Long, S.

    1993-12-01

    This report in the Hawaii Energy Strategy Project examines world and regional fossil energy dynamics. The topics of the report include fossil energy characteristics, the world oil industry including reserves, production, consumption, exporters, importers, refining, products and their uses, history and trends in the global oil market and the Asia-Pacific market; world gas industry including reserves, production, consumption, exporters, importers, processing, gas-based products, international gas market and the emerging Asia-Pacific gas market; the world coal industry including reserves, classification and quality, utilization, transportation, pricing, world coal market, Asia-Pacific coal outlook, trends in Europe and the Americas; and environmental trends affecting fossil fuels. 132 figs., 46 tabs.

  20. Refiners trade hydroprocessing experience

    SciTech Connect (OSTI)

    Not Available

    1984-04-16

    Hydrogen treating and conversion processes less severe than hydrocracking abound in most refineries and therefore were a subject of high interest at the National Petroleum Refiners Association question and answer session on refining technology. The present paper, which is the second abstract of the transcript of the most recent meeting, covers hydroprocessing and some of its mechanical, process, and catalytic aspects.

  1. Trends in petroleum refining process technology

    SciTech Connect (OSTI)

    Kowalczyk, D. [Refining Process Services, Cheswick, PA (United States)

    1995-12-31

    In the 1990`s, the shift toward reformulated fuels and the unrelenting economic pressures on the petroleum refining industry have led to the ongoing development of a series of technological advances to improve fuels quality and industry operating efficiency. In this paper, ten of the most innovative and high impact recent developments in petroleum refining process technology will be highlighted. Process improvements and innovations have occurred in all facets of petroleum refining operations including fluid catalytic cracking, ether production, desulfurization, hydrocracking, gas processing, environmental control and heavy oil processing. Discussed will be the technical and economic impact of each of these new technologies on the petroleum refinery of the late 20th and early 21st century.

  2. Hydrotreating operations discussed at refining meeting

    SciTech Connect (OSTI)

    NONE

    1995-06-12

    At the most recent National Petroleum Refiners Association question and answer session on refining and petrochemical technology, refiners and a panel of experts exchanged experiences on hydrotreater operations. Topics addressed included reactor pressurization, scale basket removal, and the use of antifoulants in effluent exchangers. This article presents comments from the panelists on the following questions. (1) What is the industry practice used to speed up the pressurization of 2.25 Cr/1 Mo reactors during start-up? Is there any relationship between reactor skin temperature and pressure used? (2) Has anyone removed scale baskets from a hydrotreating reactor and compared operations before and after? If so, were there any noticeable differences? Why? (3) What is the industry experience with the use of antifoulants for hydrocracking or hydrotreating reactor effluent exchangers?

  3. Assessment of Replicable Innovative Industrial Cogeneration Applicatio...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Power for Industry: A Market Assessment, August 2003 Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries...

  4. China's industrial sector in an international context

    SciTech Connect (OSTI)

    Price, Lynn; Worrell, Ernst; Martin, Nathan; Lehman, Bryan; Sinton, Jonathan

    2000-05-01

    The industrial sector accounts for 40% of global energy use. In 1995, developing countries used an estimated 48 EJ for industrial production, over one-third of world total industrial primary energy use (Price et al., 1998). Industrial output and energy use in developing countries is dominated by China, India, and Brazil. China alone accounts for about 30 EJ (National Bureau of Statistics, 1999), or about 23% of world industrial energy use. China's industrial sector is extremely energy-intensive and accounted for almost 75% of the country's total energy use in 1997. Industrial energy use in China grew an average of 6.6% per year, from 14 EJ in 1985 to 30 EJ in 1997 (Sinton et al., 1996; National Bureau of Statistics, 1999). This growth is more than three times faster than the average growth that took place in the world during the past two decades. The industrial sector can be divided into light and heavy industry, reflecting the relative energy-intensity of the manufacturing processes. In China, about 80% of the energy used in the industrial sector is consumed by heavy industry. Of this, the largest energy-consuming industries are chemicals, ferrous metals, and building materials (Sinton et al., 1996). This paper presents the results of international comparisons of production levels and energy use in six energy-intensive subsectors: iron and steel, aluminum, cement, petroleum refining, ammonia, and ethylene. The sectoral analysis results indicate that energy requirements to produce a unit of raw material in China are often higher than industrialized countries for most of the products analyzed in this paper, reflecting a significant potential to continue to improve energy efficiency in heavy industry.

  5. EJSE Special Issue: Wireless Sensor Networks and Practical Applications (2010) Many industrial sectors across the world undergo

    E-Print Network [OSTI]

    Halgamuge, Malka N.

    2010-01-01

    period of time. Across the world, while there is a constant growth in the demand for energy on one hand the maturity in production with a forecast that production can only be limited to 2-3 decades ending

  6. Innovation and the state : development strategies for high technology industries in a world of fragmented production : Israel, Ireland, and Taiwan

    E-Print Network [OSTI]

    Breznitz, Dan

    2005-01-01

    One of the most unexpected changes of the 1990s is that firms in a number of emerging economies not previously known for their high-technology industries have leapfrogged to the forefront in new Information Technologies ...

  7. Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April, 2006 (draft) 1 MEASURING INDUSTRIAL ENERGY SAVINGS

    E-Print Network [OSTI]

    Kissock, Kelly

    . A history of verified savings reduces the uncertainty about future lighting recommendations and encourages are not implemented since there is no history of successful verification. In other cases, retrofits #12;Society-six Industrial Assessment Centers at universities throughout the United States (DOE, 2006). Each center is funded by

  8. Voluntary Agreements for Energy Efficiency or GHG EmissionsReduction in Industry: An Assessment of Programs Around the World

    SciTech Connect (OSTI)

    Price, Lynn

    2005-06-01

    Voluntary agreements for energy efficiency improvement and reduction of energy-related greenhouse gas (GHG) emissions have been a popular policy instrument for the industrial sector in industrialized countries since the 1990s. A number of these national-level voluntary agreement programs are now being modified and strengthened, while additional countries--including some recently industrialized and developing countries--are adopting these type of agreements in an effort to increase the energy efficiency of their industrial sectors.Voluntary agreement programs can be roughly divided into three broad categories: (1) programs that are completely voluntary, (2) programs that use the threat of future regulations or energy/GHG emissions taxes as a motivation for participation, and (3) programs that are implemented in conjunction with an existing energy/GHG emissions tax policy or with strict regulations. A variety of government-provided incentives as well as penalties are associated with these programs. This paper reviews 23 energy efficiency or GHG emissions reduction voluntary agreement programs in 18 countries, including countries in Europe, the U.S., Canada, Australia, New Zealand, Japan, South Korea, and Chinese Taipei (Taiwan) and discusses preliminary lessons learned regarding program design and effectiveness. The paper notes that such agreement programs, in which companies inventory and manage their energy use and GHG emissions to meet specific reduction targets, are an essential first step towards GHG emissions trading programs.

  9. Effluent treatment in the paint and coating industry. (Latest citations from World Surface Coatings abstracts). Published Search

    SciTech Connect (OSTI)

    1996-02-01

    The bibliography contains citations concerning the analysis and treatment of effluents from the coating industry. Filters used for solvent adsorption and recovery, activated carbon adsorption of paint fumes, hydrogen peroxide treatment of wastes, effluent heat recovery, and biological treatments are discussed. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  10. Towards automated crystallographic structure refinement with phenix.refine

    SciTech Connect (OSTI)

    Afonine, Pavel V., E-mail: pafonine@lbl.gov; Grosse-Kunstleve, Ralf W.; Echols, Nathaniel; Headd, Jeffrey J.; Moriarty, Nigel W. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Mustyakimov, Marat; Terwilliger, Thomas C. [Los Alamos National Laboratory, M888, Los Alamos, NM 87545 (United States); Urzhumtsev, Alexandre [CNRS–INSERM–UdS, 1 Rue Laurent Fries, BP 10142, 67404 Illkirch (France); Université Henri Poincaré, Nancy 1, BP 239, 54506 Vandoeuvre-lès-Nancy (France); Zwart, Peter H. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, MS64R0121, Berkeley, CA 94720 (United States); University of California Berkeley, Berkeley, CA 94720 (United States)

    2012-04-01

    phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods. phenix.refine is a program within the PHENIX package that supports crystallographic structure refinement against experimental data with a wide range of upper resolution limits using a large repertoire of model parameterizations. It has several automation features and is also highly flexible. Several hundred parameters enable extensive customizations for complex use cases. Multiple user-defined refinement strategies can be applied to specific parts of the model in a single refinement run. An intuitive graphical user interface is available to guide novice users and to assist advanced users in managing refinement projects. X-ray or neutron diffraction data can be used separately or jointly in refinement. phenix.refine is tightly integrated into the PHENIX suite, where it serves as a critical component in automated model building, final structure refinement, structure validation and deposition to the wwPDB. This paper presents an overview of the major phenix.refine features, with extensive literature references for readers interested in more detailed discussions of the methods.

  11. Minimally refined biomass fuel

    DOE Patents [OSTI]

    Pearson, Richard K. (Pleasanton, CA); Hirschfeld, Tomas B. (Livermore, CA)

    1984-01-01

    A minimally refined fluid composition, suitable as a fuel mixture and derived from biomass material, is comprised of one or more water-soluble carbohydrates such as sucrose, one or more alcohols having less than four carbons, and water. The carbohydrate provides the fuel source; water solubilizes the carbohydrates; and the alcohol aids in the combustion of the carbohydrate and reduces the vicosity of the carbohydrate/water solution. Because less energy is required to obtain the carbohydrate from the raw biomass than alcohol, an overall energy savings is realized compared to fuels employing alcohol as the primary fuel.

  12. ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aluminum Industry Vision: Sustainable Solutions for a Dynamic World ITP Aluminum: Aluminum Industry Vision: Sustainable Solutions for a Dynamic World alumvision.pdf More Documents...

  13. Gasification, polygeneration capture interest of refiners

    SciTech Connect (OSTI)

    Aalund, L.R.

    1996-12-09

    Integrated gasification combined cycle (IGCC) plants are moving into the mainstream of international refining. Such plants can turn refinery dregs into the whitest of all products--sparkling electricity--plus hydrogen and synthesis gas. Hydrogen is an indispensable element for cleaning up and improving modern fuels, while syngas is the feedstock for important finished petrochemicals and intermediaries. The status and potential of gasification technologies and projects were covered in a 3 day conference early in October in San Francisco. What made this conference different from others on the subject in the past was recognition that oil and natural gas producers and the international refining industry are becoming major power producers without government subsidies. Such projects can pass the scrutiny of lenders and the test of commerciality. They are not targeted simply for electricity, but also for production of hydrogen, steam, and petrochemical feedstock. The process objective for projects now far exceeds simple cogeneration. It`s now trigeneration, even polygeneration.

  14. Refines Efficiency Improvement

    SciTech Connect (OSTI)

    WRI

    2002-05-15

    Refinery processes that convert heavy oils to lighter distillate fuels require heating for distillation, hydrogen addition or carbon rejection (coking). Efficiency is limited by the formation of insoluble carbon-rich coke deposits. Heat exchangers and other refinery units must be shut down for mechanical coke removal, resulting in a significant loss of output and revenue. When a residuum is heated above the temperature at which pyrolysis occurs (340 C, 650 F), there is typically an induction period before coke formation begins (Magaril and Aksenova 1968, Wiehe 1993). To avoid fouling, refiners often stop heating a residuum before coke formation begins, using arbitrary criteria. In many cases, this heating is stopped sooner than need be, resulting in less than maximum product yield. Western Research Institute (WRI) has developed innovative Coking Index concepts (patent pending) which can be used for process control by refiners to heat residua to the threshold, but not beyond the point at which coke formation begins when petroleum residua materials are heated at pyrolysis temperatures (Schabron et al. 2001). The development of this universal predictor solves a long standing problem in petroleum refining. These Coking Indexes have great potential value in improving the efficiency of distillation processes. The Coking Indexes were found to apply to residua in a universal manner, and the theoretical basis for the indexes has been established (Schabron et al. 2001a, 2001b, 2001c). For the first time, a few simple measurements indicates how close undesired coke formation is on the coke formation induction time line. The Coking Indexes can lead to new process controls that can improve refinery distillation efficiency by several percentage points. Petroleum residua consist of an ordered continuum of solvated polar materials usually referred to as asphaltenes dispersed in a lower polarity solvent phase held together by intermediate polarity materials usually referred to as resins. The Coking Indexes focus on the amount of these intermediate polarity species since coke formation begins when these are depleted. Currently the Coking Indexes are determined by either titration or solubility measurements which must be performed in a laboratory. In the current work, various spectral, microscopic, and thermal techniques possibly leading to on-line analysis were explored for measuring the Coking Indexes.

  15. Achieve Steam System Excellence: Industrial Technologies Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in plant improvement projects. * Steam System Opportunity Assessment for the Pulp and Paper, Chemical Manufacturing, and Petroleum Refining Industries (1) defines the volume and...

  16. Crystal structure refinement with SHELXL

    SciTech Connect (OSTI)

    Sheldrick, George M., E-mail: gsheldr@shelx.uni-ac.gwdg.de [Department of Structural Chemistry, Georg-August Universität Göttingen, Tammannstraße 4, Göttingen 37077 (Germany)

    2015-01-01

    New features added to the refinement program SHELXL since 2008 are described and explained. The improvements in the crystal structure refinement program SHELXL have been closely coupled with the development and increasing importance of the CIF (Crystallographic Information Framework) format for validating and archiving crystal structures. An important simplification is that now only one file in CIF format (for convenience, referred to simply as ‘a CIF’) containing embedded reflection data and SHELXL instructions is needed for a complete structure archive; the program SHREDCIF can be used to extract the .hkl and .ins files required for further refinement with SHELXL. Recent developments in SHELXL facilitate refinement against neutron diffraction data, the treatment of H atoms, the determination of absolute structure, the input of partial structure factors and the refinement of twinned and disordered structures. SHELXL is available free to academics for the Windows, Linux and Mac OS X operating systems, and is particularly suitable for multiple-core processors.

  17. North Dakota Refining Capacity Study

    SciTech Connect (OSTI)

    Dennis Hill; Kurt Swenson; Carl Tuura; Jim Simon; Robert Vermette; Gilberto Marcha; Steve Kelly; David Wells; Ed Palmer; Kuo Yu; Tram Nguyen; Juliam Migliavacca

    2011-01-05

    According to a 2008 report issued by the United States Geological Survey, North Dakota and Montana have an estimated 3.0 to 4.3 billion barrels of undiscovered, technically recoverable oil in an area known as the Bakken Formation. With the size and remoteness of the discovery, the question became 'can a business case be made for increasing refining capacity in North Dakota?' And, if so what is the impact to existing players in the region. To answer the question, a study committee comprised of leaders in the region's petroleum industry were brought together to define the scope of the study, hire a consulting firm and oversee the study. The study committee met frequently to provide input on the findings and modify the course of the study, as needed. The study concluded that the Petroleum Area Defense District II (PADD II) has an oversupply of gasoline. With that in mind, a niche market, naphtha, was identified. Naphtha is used as a diluent used for pipelining the bitumen (heavy crude) from Canada to crude markets. The study predicted there will continue to be an increase in the demand for naphtha through 2030. The study estimated the optimal configuration for the refinery at 34,000 barrels per day (BPD) producing 15,000 BPD of naphtha and a 52 percent refinery charge for jet and diesel yield. The financial modeling assumed the sponsor of a refinery would invest its own capital to pay for construction costs. With this assumption, the internal rate of return is 9.2 percent which is not sufficient to attract traditional investment given the risk factor of the project. With that in mind, those interested in pursuing this niche market will need to identify incentives to improve the rate of return.

  18. Reduce NOx and Improve Energy Efficiency, Software Tools for Industry, Industrial Technologies Program (ITP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2008-12-01

    This fact sheet describes how the Industrial Technologies Program NOx and Energy Assessment Tool (NxEAT) can help petroleum refining and chemical plants improve energy efficiency.

  19. WORLD ROBOTICS 2007 EXECUTIVE SUMMARY

    E-Print Network [OSTI]

    De Luca, Alessandro

    in 2005. In 2006, world-wide shipments to the automotive industry decreased by 17% compared to 2005. Supplies to the automotive industry also decreased slightly. Supplies to all other industries the automotive and electrical/electronics industry in 2005, purchases in both sectors were down in 2006

  20. Economic impact of the European Union Emission Trading Scheme : evidence from the refining sector

    E-Print Network [OSTI]

    Lacombe, Romain H

    2008-01-01

    I study the economic impact of the European Union Emission Trading Scheme (EU ETS) on the refining industry in Europe. I contrast previous ex-ante studies with the lessons from a series of interviews I conducted with ...

  1. Refining the shifted topological vertex

    SciTech Connect (OSTI)

    Drissi, L. B.; Jehjouh, H.; Saidi, E. H. [Faculte des Sciences, Laboratory/UFR-Physique des Hautes Energies, Rabat, 1014 (Morocco); Groupement National de Physique des Hautes Energies (GNPHE), Siege focal:FS, Rabat, 1014 (Morocco)

    2009-01-15

    We study aspects of the refining and shifting properties of the 3d MacMahon function C{sub 3}(q) used in topological string theory and BKP hierarchy. We derive the explicit expressions of the shifted topological vertex S{sub {lambda}}{sub {mu}}{sub {nu}}(q) and its refined version T{sub {lambda}}{sub {mu}}{sub {nu}}(q,t). These vertices complete results in literature.

  2. Paint and coating industry: health and safety. January 1980-March 1989 (Citations from World Surface Coatings Abstracts). Report for January 1980-March 1989

    SciTech Connect (OSTI)

    Not Available

    1989-04-01

    This bibliography contains citations concerning health and safety hazards in the paint and coating industries. The exposure to toxic chemicals, and health hazards of working with powders, solvents, and paints such as hepatitis, dermatitis, respiratory ailments are discussed. Safety regulations are included. Fire and explosion hazards in the painting industry are described. Hazards outside the workplace involving the use of these products are briefly considered. (Contains 165 citations fully indexed and including a title list.)

  3. Opportunities, Barriers and Actions for Industrial Demand Response in California

    E-Print Network [OSTI]

    McKane, Aimee T.

    2009-01-01

    for demand response and metal castings, food processing,industrial gases, metal casting, petroleum refining, pulpMetal plating, finishing Metal casting of specialized parts

  4. Industrial Fuel Flexibility Workshop

    SciTech Connect (OSTI)

    none,

    2006-09-01

    On September 28, 2006, in Washington, DC, ITP and Booz Allen Hamilton conducted a fuel flexibility workshop with attendance from various stakeholder groups. Workshop participants included representatives from the petrochemical, refining, food and beverage, steel and metals, pulp and paper, cement and glass manufacturing industries; as well as representatives from industrial boiler manufacturers, technology providers, energy and waste service providers, the federal government and national laboratories, and developers and financiers.

  5. Reformulated Gasoline Market Affected Refiners Differently, 1995

    Reports and Publications (EIA)

    1996-01-01

    This article focuses on the costs of producing reformulated gasoline (RFG) as experienced by different types of refiners and on how these refiners fared this past summer, given the prices for RFG at the refinery gate.

  6. Effluent treatment in the paint and coating industry. January 1980-May 1989 (Citations from World Surface Coatings Abstracts). Report for January 1980-May 1989

    SciTech Connect (OSTI)

    Not Available

    1989-06-01

    This bibliography contains citations concerning the analysis and treatment of effluents from the coating industry. Filters used for solvent absorption and recovery, activated-carbon absorption of paint fumes, hydrogen peroxide treatment of wastes, effluent heat recovery, and biological treatments are discussed. (This updated bibliography contains 101 citations, 18 of which are new entries to the previous edition.)

  7. Effluent treatment in the paint and coating industry. January 1980-January 1990 (A Bibliography from World Surface Coatings Abstracts). Report for January 1980-January 1990

    SciTech Connect (OSTI)

    Not Available

    1990-04-01

    This bibliography contains citations concerning the analysis and treatment of effluents from the coating industry. Filters used for solvent absorption and recovery, activated carbon absorption of paint fumes, hydrogen peroxide treatment of wastes, effluent heat recovery, and biological treatments are discussed. (This updated bibliography contains 286 citations, 185 of which are new entries to the previous edition.)

  8. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Derbidge, T. Craig (Sunnyvale, CA); Mulholland, James A. (Chapel Hill, NC); Foster, Edward P. (Macungie, PA)

    1986-01-01

    An air-purged burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired without the coking thereof on the burner components. The air-purged burner is designed for the firing of pulverized solvent refined coal in a tangentially fired boiler.

  9. A Refined Harmonic Rayleigh--Ritz Procedure and an Explicitly Restarted Refined Harmonic Arnoldi Algorithm #

    E-Print Network [OSTI]

    Jia, Zhongxiao

    A Refined Harmonic Rayleigh--Ritz Procedure and an Explicitly Restarted Refined Harmonic Arnoldi Algorithm # Guizhi Chen + Zhongxiao Jia # Abstract The work is fourfold. First, a refined harmonic Rayleigh--Ritz procedure is proposed, some relationships are established between the refined harmonic Ritz vector

  10. Metabolic paths in world economy and crude oil price

    E-Print Network [OSTI]

    Picciolo, Francesco; Ruzzenenti, Franco

    2015-01-01

    In 1983 Hamilton demonstrated the correlation between the price of oil and gross national product for the U.S. economy. A prolific literature followed exploring the potential correlation of oil prices with other important indices like inflation, industrial production, and food prices, using increasingly refined tools. Our work sheds new light on the role of oil prices in shaping the world economy by investigating the metabolic paths of value across trade between 1960 and 2010, by means of Markov Chain analysis. We show that the interdependence of countries' economies are strictly (anti)correlated to the price of oil. We observed a remarkably high correlation of 0.85, unmatched by any former study addressing the correlation between oil price and major economic indicators.

  11. Transforming the Oil Industry into the Energy Industry

    E-Print Network [OSTI]

    Sperling, Daniel; Yeh, Sonia

    2009-01-01

    Transforming the Oil Industry into the Energy Industry BYculprit. It consumes half the oil used in the world andconsuming two thirds of the oil and causing about one third

  12. The potential for reducing energy utilization in the refining industry

    SciTech Connect (OSTI)

    Petrick, M.; Pellegrino, J.

    1999-10-08

    The paper first discusses energy use in petroleum refineries and CO{sub 2} emissions because of the fuels used. Then the paper looks at near-, mid-, and long-term opportunities for energy reduction. Some of the options are catalysts, cooling water recycling, steam system efficiency, and the use of coke and petroleum residues.

  13. Energy Efficiency Improvement in the Petroleum Refining Industry

    E-Print Network [OSTI]

    Worrell, Ernst; Galitsky, Christina

    2005-01-01

    crude distillation unit, is converted to gasoline, and thethe vacuum distillation unit is converted to gasoline. Newer

  14. ITP Petroleum Refining: Technology Roadmap for the Petroleum Industry |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation Standards and TestEquipment: EnergyITC

  15. Clustering in the biotechnology industry

    E-Print Network [OSTI]

    Schoenberg, Frederic P

    2006-01-01

    the world to attract high-technology industry. The mostare attempts to create high-technology industrial clusters,institutes because high-technology firms frequently spin-off

  16. Refiners Increasingly Employing Catalyst Regeneration as Alternative...

    Open Energy Info (EERE)

    million by the end of 2019. Refiners Benefit from Catalyst Regeneration Technology via Price Reductions and Lower Maintenance Costs The catalyst regeneration technology is the...

  17. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Plant managers around the world are interested in improving the energy efficiency of their facilities while both growing and modernizing their manufacturing capabilities. Emerging industrial technologies, both at the ...

  18. World frontiers beckon oil finders

    SciTech Connect (OSTI)

    Not Available

    1991-09-01

    This paper discusses the international aspects of the petroleum industry. Most who work in the industry agree that the possibilities for huge are found largely in international regions. Something that is helping fuel that possibility is the way countries are increasingly opening their doors to US oil industry involvement. Listed in this paper is a partial list of the reported projects now underway around the world involving US companies. It is not intended to be comprehensive, but rather an indication of how work continues despite a general lull atmosphere for the oil industry. These include Albania, Bulgaria, Congo, Czechoslovakia, Dominican Republic, Ethiopia, Ireland, Malta, Madagascar, Mongolia, Mozambique, Nigeria, Panama, Paraquay, and Senegal.

  19. Firing of pulverized solvent refined coal

    DOE Patents [OSTI]

    Lennon, Dennis R. (Allentown, PA); Snedden, Richard B. (McKeesport, PA); Foster, Edward P. (Macungie, PA); Bellas, George T. (Library, PA)

    1990-05-15

    A burner for the firing of pulverized solvent refined coal is constructed and operated such that the solvent refined coal can be fired successfully without any performance limitations and without the coking of the solvent refined coal on the burner components. The burner is provided with a tangential inlet of primary air and pulverized fuel, a vaned diffusion swirler for the mixture of primary air and fuel, a center water-cooled conical diffuser shielding the incoming fuel from the heat radiation from the flame and deflecting the primary air and fuel steam into the secondary air, and a watercooled annulus located between the primary air and secondary air flows.

  20. Network Structures in Industrial Pricing: The Effect of Emergent Roles in Tokyo Supplier-Chain Hierarchies

    E-Print Network [OSTI]

    Nakano, Tsutomu; White, Douglas R.

    2007-01-01

    Scale Network of a Tokyo Industrial District: Small-World,Sabel. 1984. The Second Industrial Divide: Possibilities forthe large-scale regional industrial cluster of Tokyo (Nakano

  1. Refining: moods and modes for 1984. [From NPRA meeting, San Antonio, TX 3/84

    SciTech Connect (OSTI)

    Not Available

    1984-04-11

    Thousands of refining experts met in March in San Antonio, TX at the 82nd meeting of the National Petroleum Refiners Association, including many international oil-industry officials and executives. For major US refiners, the mood was decidedly optimistic, because: (1) for a number of refiners, negative margins on many crude oils that persisted even after the March 1983 price adjustment by OPEC are finally improving as capacities for upgrading residual fuel into more-valuable light products continue to come onstream; and (2) multinational oil companies, while concerned about downstream market penetration by producing countries, nevertheless expressed the feeling that this would probably further reduce the negotiating power of OPEC. For smaller, nonmajor refiners, the mood was one of concern: in the US, 97 refineries have officially closed since 1981, most of them smaller, inefficient facilities. There was optimism by all about environmental and social concerns, specifically acid rain and lead pollution. For the national oil companies of less-developed countries, a vicious circle emerged concerning the economic ramifications of the continuing development of catalysts for cracking heavy feedstock. This issue presents the fuel price/tax series and industrial fuel prices for March 1984 for countries of the Eastern Hemisphere.

  2. The 1987 refining and petrochemical technology yearbook

    SciTech Connect (OSTI)

    Not Available

    1987-01-01

    This annual covers the latest in refining and petrochemical technology written by the experts in the field. Opening with a foreword by Richard Corbett, Refining and Petrochemical Editior of the Oil and Gas Journal. The annual includes nearly 100 articles from the 1986 issues of the Oil and Gas Journal, comprising a collection of new technical information, methods of analysis, forecasts and trends in such subject areas as plants, fuels, gasolines, coking, processing, contents, hydrocracking, equipment, catalysts, and petrochemicals.

  3. AN ASSESSMENT OF DATA ON OUTPUT INDUSTRIAL SUB-SECTORS

    E-Print Network [OSTI]

    of that sub-sector. This typically includes the "resource" sub-sectors (chemicals, metals, pulp and paper of industry was considered a "sector" of the overall group known as Industry. Thus we spoke of the pulp and paper sector or the petroleum refining sector within industry. Because of increasing references

  4. Sustainable treatment of hydrocarbon-contaminated industrial land 

    E-Print Network [OSTI]

    Cunningham, Colin John

    2012-06-25

    Land contamination by petroleum hydrocarbons is a widespread and global environmental pollution issue from recovery and refining of crude oil and the ubiquitous use of hydrocarbons in industrial processes and applications. ...

  5. Preliminary Results from the Industrial Steam System Market Assessment 

    E-Print Network [OSTI]

    McGrath, G. P.; Wright, A. L.

    2002-01-01

    This paper discusses fuel use and potential energy savings in the steam systems of three steam intensive industries: pulp and paper, chemical manufacturing, and petroleum refining. To determine the energy consumption to generate steam...

  6. Energy Management in a Multi-Industry Organization 

    E-Print Network [OSTI]

    Lawrence, J.

    1981-01-01

    Tenneco operates in seven of the nation's ten most energy intensive industries: Petroleum Refining, Chemicals Manufacturing, Pulp and Paper, Transportation Equipment, Primary Metals, Food Processing, and Machinery. This diversification...

  7. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Permit Industrial Permit The Industrial Permit authorizes the Laboratory to discharge point-source effluents under the National Pollutant Discharge Elimination System....

  8. Access to affordable and reliable energy has been a cornerstone of the world's increasing prosperity and economic growth since the beginning of the industrial revolution. Our use of energy in the twenty-first century must also be

    E-Print Network [OSTI]

    prosperity and economic growth since the beginning of the industrial revolution. Our use of energy to create the foundation for this new industrial revolution. The talk will also discuss policies public. F E A T U R I N G A New Industrial Revolution for a Sustainable Energy Future SCOB 228 · Friday

  9. World crude capacity, conversion capability inch upward

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1994-12-19

    Reported world crude capacity increased almost 1 million b/d, while conversion processes--fluid catalytic cracking (FCC), hydrocracking, coking--increased more than 1.7 million b/d or 8.3%, according to the Journal's most recent survey of world refining capacity. As a measure of capacity growth in the past year, changes in distillation capacities (atmospheric plus vacuum) were calculated for three major refining regions. The year-to-year comparison indicates: for the US, an increase of 293,000 b/d, or 1.3%; for the European Economic Community (E.E.C.), an increase of 431,000 b/d, or 2.6%; and for Asia/Pacific, excluding China, an increase of 122,000 b/d, or 1.1%. In addition to the compiled data the paper describes the survey layout, regional changes, conversion units, hydroprocessing, company size, oxygenates, and construction.

  10. Petroleum refining for the nontechnical person

    SciTech Connect (OSTI)

    Leffler, W.L.

    1985-01-01

    The second edition of this book remains a straightforward and uncomplicated text setting forth the many technical procedures involved in refining. The author has added a new chapter on simple and complex refineries and a revised chapter on gasoline blending, including current information on alcohol blending components. Contents include: Crude oil characteristics; Distilling; Flashing; The chemistry of petroleum; Catalytic cracking; Refining gas plants; Alkylation; Catalytic reforming; Residue reduction; Hydrocracking; Gasoline blending; Distillate fuels; Asphalt and residual fuel; Hydrogen, hydrotreating, and sulfur plants; Isomerization; Solvent recovery of aromatics; Ethylene plants; Simple and complex refineries; Crude oil, condensate, and natural gas liquids; Fuel values - heating values.

  11. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2015-06-09

    A system and method for reactively refining hydrocarbons, such as heavy oils with API gravities of less than 20 degrees and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure, using a selected fluid at supercritical conditions. A reaction portion of the system and method delivers lightweight, volatile hydrocarbons to an associated contacting unit which operates in mixed subcritical/supercritical or supercritical modes. Using thermal diffusion, multiphase contact, or a momentum generating pressure gradient, the contacting unit separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques.

  12. TechConnect World Innovation Conference and Expo 2015

    Broader source: Energy.gov [DOE]

    The TechConnect World Innovation Conference is an annual event uniquely designed to accelerate the commercialization of innovations out of the lab and into industry.

  13. Hybrid Electric Vehicles: How They Perform in the Real World...

    Broader source: Energy.gov (indexed) [DOE]

    States. The AVTA works with government, commercial, and industry fleets to measure real-world vehicle performance of production and pre-production advanced technology vehicles and...

  14. EASE for Industrial Excellence in Software

    E-Print Network [OSTI]

    EASE for Industrial Excellence in Software Activity Report 2010 for Industry Excellence Center time. The academic world has a focus on long-term research and industry must deliver fast to the market, thorough analysis and thinking "out of the box" pro- vide new perspectives. The industrial excellence

  15. Global Performance in the Pulp & Paper Industry

    E-Print Network [OSTI]

    Global Performance in the Pulp & Paper Industry: An Overview Don Roberts CIBC World Markets April 4 in the Pulp & Paper Industry:in the Pulp & Paper Industry: An OverviewAn Overview Presented at: Current Status of Maine's Pulp & Paper Industry Challenges, Strengths & Opportunities April 4, 2003 Bangor, Maine #12;Don

  16. Energy Bandwidth for Petroleum Refining Processes

    SciTech Connect (OSTI)

    none,

    2006-10-01

    The petroleum refining energy bandwidth report analyzes the most energy-intensive unit operations used in U.S. refineries: crude oil distillation, fluid catalytic cracking, catalytic hydrotreating, catalytic reforming, and alkylation. The "bandwidth" provides a snapshot of the energy losses that can potentially be recovered through best practices and technology R&D.

  17. Patterns for Refinement Automation Alexei Iliasov1

    E-Print Network [OSTI]

    Southampton, University of

    Patterns for Refinement Automation Alexei Iliasov1 , Elena Troubitsyna2 , Linas Laibinis2 in rigorous modelling and design by increasing automation of development steps. We introduce a notion establishes a basis for building a tool that would support formal system development via pattern reuse

  18. Hydrocarbon Processing`s refining processes `96

    SciTech Connect (OSTI)

    NONE

    1996-11-01

    The paper compiles information on the following refining processes: alkylation, benzene reduction, benzene saturation, catalytic cracking, catalytic reforming, coking, crude distillation, deasphalting, deep catalytic cracking, electrical desalting, ethers, fluid catalytic cracking, hydrocracking, hydrogenation, hydrotreating, isomerization, resid catalytic cracking, treating, and visbreaking. The application, products, a description of the process, yield, economics, installation, and licensor are given for each entry.

  19. Solvent dramatically affects protein structure refinement

    E-Print Network [OSTI]

    Summa, Christopher M.

    Solvent dramatically affects protein structure refinement Gaurav Chopraa , Christopher M. Summab, fold and function in aqueous solution in vivo and in vitro. In this work, we study the role of solvent explicit and implicit solvent were performed on a set of 75 native proteins to test the various energy

  20. Transforming and Refining Abstract Constraint Specifications

    E-Print Network [OSTI]

    Walsh, Toby

    Transforming and Refining Abstract Constraint Specifications Alan M. Frisch1 , Brahim Hnich2 , Ian choose model transformations to reduce greatly the amount of effort that is required to solve a problem by systematic search. It is a consid- erable challenge to automate such transformations. A problem may be viewed

  1. OECD/IEA 2013 World Renewable Energy

    E-Print Network [OSTI]

    Canet, Léonie

    © OECD/IEA 2013 World Renewable Energy Outlook 2030-2050 Paolo Frankl Head, Renewable Energy 2030 2035 TWh Coal Renewables Gas Nuclear Oil Source: IEA World Energy Outlook 2012 New Policies important renewable energy source in industry in 2050 solar thermal contributes mainly to low

  2. ITP Petroleum Refining: Energy and Environmental Profile of the U.S.

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls21,Equipment:Petroleum Refining Industry (November

  3. Chemistry World Surfactants: the ubiquitous amphiphiles

    E-Print Network [OSTI]

    Glaser, Rainer

    /mineral 60 150 Plastic additives 60 40 Pulp and paper 100 120 #12;Pulp and paper 100 120 Explosives 10 10Chemistry World Surfactants: the ubiquitous amphiphiles The surfactant industry is a huge surfactant industry is a multi-billion pound business (Fig 1), with markets everywhere from household

  4. New world cutaneous leishmaniasis

    E-Print Network [OSTI]

    Trufant, Joshua W; Lewin, Jesse M; Hale, Christopher S; Meehan, Shane A; Pomeranz, Miriam Keltz

    2015-01-01

    Mitropoulos P. , et al. New world cutaneous leishmanaiasis:2014 Case Presentation New world cutaneous leishmaniasishave been identified. Old World CL is most commonly caused

  5. Industrial Engineering Coop/Intern Walt Disney Parks & Resorts Want to be part of a worldclass organization, learning new skills that you can apply in the "real world"? How

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial Engineering Coop/Intern Walt Disney Parks & Resorts Want to be part admission to theme parks and all the shopping and restaurants you can get your hands on? If this doesn't sound like your typical Industrial Engineering position, that's because it's not! Our program

  6. Grain Refinement of Permanent Mold Cast Copper Base Alloys

    SciTech Connect (OSTI)

    M.Sadayappan; J.P.Thomson; M.Elboujdaini; G.Ping Gu; M. Sahoo

    2005-04-01

    Grain refinement is a well established process for many cast and wrought alloys. The mechanical properties of various alloys could be enhanced by reducing the grain size. Refinement is also known to improve casting characteristics such as fluidity and hot tearing. Grain refinement of copper-base alloys is not widely used, especially in sand casting process. However, in permanent mold casting of copper alloys it is now common to use grain refinement to counteract the problem of severe hot tearing which also improves the pressure tightness of plumbing components. The mechanism of grain refinement in copper-base alloys is not well understood. The issues to be studied include the effect of minor alloy additions on the microstructure, their interaction with the grain refiner, effect of cooling rate, and loss of grain refinement (fading). In this investigation, efforts were made to explore and understand grain refinement of copper alloys, especially in permanent mold casting conditions.

  7. Using supercritical fluids to refine hydrocarbons

    DOE Patents [OSTI]

    Yarbro, Stephen Lee

    2014-11-25

    This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

  8. 5 World Oil Trends WORLD OIL TRENDS

    E-Print Network [OSTI]

    's share of world crude oil production has rebound5 World Oil Trends Chapter 1 WORLD OIL TRENDS INTRODUCTION In considering the outlook for California's petroleum supplies, it is important to give attention to expecta- tions of what the world oil

  9. Reaping Energy Savings from Petroleum Refining 

    E-Print Network [OSTI]

    Deng, A.; Cascone, R.

    2006-01-01

    balance given in terms of percentages of crude feed for various streams. It is noted that in California, where crude oils processed tend to be heavy, hydrocracking is often used to reduce the molecular weights of the vacuum gas oil and vacuum residual... processes. The REEP leverages Nexant’s refining expertise from its Oil and Gas business unit and DSM program implementation experience from its Energy Management business unit. The Program also fully uses the lengthened duration of the PGC funding...

  10. LOCAL REFINEMENT AND MULTILEVEL PRECONDITIONING: IMPLEMENTATION AND NUMERICAL EXPERIMENTS

    E-Print Network [OSTI]

    Holst, Michael J.

    refinement. While standard multilevel methods are effective for uniform refinement- based discretizations refined 2D and 3D meshes based on fairly standard (and easily implementable) red and red-green mesh by the Burroughs Wellcome Fund through the LJIS predoctoral training program at UC San Diego, in part by NSF (ACI

  11. Parallel Triangular Decompositions of an Oil Refining Simulation Xiaodong Zhang

    E-Print Network [OSTI]

    Moreno Maza, Marc

    important process in oil refining is to separate the crude oil into various oil products. This process the composition of the various oil products in designed refining columns operated under a given set of conditions and discussions. 1 Introduction One important process in oil refining is to separate the crude oil into various

  12. World Oil Prices in AEO2007 (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01

    Over the long term, the Annual Energy Outlook 2007 (AEO) projection for world oil prices -- defined as the average price of imported low-sulfur, light crude oil to U.S. refiners -- is similar to the AEO2006 projection. In the near term, however, AEO2007 projects prices that are $8 to $10 higher than those in AEO2006.

  13. Industrial Relations

    E-Print Network [OSTI]

    Ulman, Lloyd

    1987-01-01

    S. Tannenbaum. Madison: Industrial 1955. The Rise of the N ai a Working Paper 8733 INDUSTRIAL RELATIONS L l o y d UlmanEconomic Theory and Doctrine INDUSTRIAL RELATIONS Two great

  14. Industrial Engineering Industrial Advisory Board

    E-Print Network [OSTI]

    Gelfond, Michael

    Industrial Engineering Industrial Advisory Board (IAB) #12;PURPOSE: The Texas Tech University - Industrial Engineering Industrial Ad- visory Board (IAB) is an association of professionals with a com- mon goal - promoting and developing the Texas Tech Department of Industrial Engineering and its students

  15. A comparative assessment of resource efficiency in petroleum refining

    SciTech Connect (OSTI)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study were incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.

  16. A comparative assessment of resource efficiency in petroleum refining

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Han, Jeongwoo; Forman, Grant S.; Elgowainy, Amgad; Cai, Hao; Wang, Michael; DiVita, Vincent B.

    2015-03-25

    Because of increasing environmental and energy security concerns, a detailed understanding of energy efficiency and greenhouse gas (GHG) emissions in the petroleum refining industry is critical for fair and equitable energy and environmental policies. To date, this has proved challenging due in part to the complex nature and variability within refineries. In an effort to simplify energy and emissions refinery analysis, we delineated LP modeling results from 60 large refineries from the US and EU into broad categories based on crude density (API gravity) and heavy product (HP) yields. Product-specific efficiencies and process fuel shares derived from this study weremore »incorporated in Argonne National Laboratory’s GREET life-cycle model, along with regional upstream GHG intensities of crude, natural gas and electricity specific to the US and EU regions. The modeling results suggest that refineries that process relatively heavier crude inputs and have lower yields of HPs generally have lower energy efficiencies and higher GHG emissions than refineries that run lighter crudes with lower yields of HPs. The former types of refineries tend to utilize energy-intensive units which are significant consumers of utilities (heat and electricity) and hydrogen. Among the three groups of refineries studied, the major difference in the energy intensities is due to the amount of purchased natural gas for utilities and hydrogen, while the sum of refinery feed inputs are generally constant. These results highlight the GHG emissions cost a refiner pays to process deep into the barrel to produce more of the desirable fuels with low carbon to hydrogen ratio.« less

  17. Using process computers as robots for refining operations

    SciTech Connect (OSTI)

    Kennedy, J.P.

    1982-05-01

    Industrial robots combine sensed inputs and external commands and develop outputs that cause the movement of materials and energy. They improve an operation by reacting to these data automatically, using stored data and programs to analyze the proper response. In many cases the development of these programs is a long and arduous task; but once verified, consistent operation and attention to detail beyond the capabilty of human operators or managers is assured. Process computers used to automate operating decisions in refineries are consequently the largest, most complex industrial robots in the world with thousands of inputs and hundreds of manipulators. This paper presents a review of the computer control applications that are becoming standardized for a refinery and the major plants: blending, reforming, hydrocracking, fluid cat cracking and crude distillation. 15 refs.

  18. ITP Petroleum Refining: Energy and Environmental Profile of the U.S. Petroleum Refining Industry (November 2007)

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergy HeadquartersFuelBConservation Standards and TestEquipment: EnergyITC Acknowledgements

  19. Deformable elastic network refinement for low-resolution macromolecular crystallography

    SciTech Connect (OSTI)

    Schröder, Gunnar F.; Levitt, Michael; Brunger, Axel T.

    2014-09-01

    An overview of applications of the deformable elastic network (DEN) refinement method is presented together with recommendations for its optimal usage. Crystals of membrane proteins and protein complexes often diffract to low resolution owing to their intrinsic molecular flexibility, heterogeneity or the mosaic spread of micro-domains. At low resolution, the building and refinement of atomic models is a more challenging task. The deformable elastic network (DEN) refinement method developed previously has been instrumental in the determinion of several structures at low resolution. Here, DEN refinement is reviewed, recommendations for its optimal usage are provided and its limitations are discussed. Representative examples of the application of DEN refinement to challenging cases of refinement at low resolution are presented. These cases include soluble as well as membrane proteins determined at limiting resolutions ranging from 3 to 7 Å. Potential extensions of the DEN refinement technique and future perspectives for the interpretation of low-resolution crystal structures are also discussed.

  20. Energy use and carbon dioxide emissions in energy-intensive industries in key developing countries

    E-Print Network [OSTI]

    Price, Lynn; Worrell, Ernst; Phylipsen, Dian

    1999-01-01

    Steel Industry in India,” Ironmaking and Steelmaking, 23(4):and Future Trends,” Ironmaking and Steelmaking World Energymanufacturing industries. Ironmaking. During the ironmaking

  1. YESI's mission is to deliver world-class interdisciplinary research on environmental sustainability for the research community, industry and policy makers. Our innovative approach is based on an equal partnership between physical, natural and social scien

    E-Print Network [OSTI]

    Pumfrey, David

    solutions to global environmental problems." Professor Sue Hartley, Director of YESI #12;Food production-derived products including ecological impacts of biofuels and oil palm plantations · Conserving ecosystem servicesYESI's mission is to deliver world-class interdisciplinary research on environmental sustainability

  2. Another Small World

    E-Print Network [OSTI]

    Bots, Eliane Esther

    2011-01-01

    Bots, E. “Another Small World. ” http://escholarship.org/uc/ISSN: 2159-2926 Another Small World Eliane Bots Bots, E. “Another Small World. ” http://escholarship.org/uc/

  3. Refiners react to changes in the pipeline infrastructure

    SciTech Connect (OSTI)

    Giles, K.A.

    1997-06-01

    Petroleum pipelines have long been a critical component in the distribution of crude and refined products in the U.S. Pipelines are typically the most cost efficient mode of transportation for reasonably consistent flow rates. For obvious reasons, inland refineries and consumers are much more dependent on petroleum pipelines to provide supplies of crude and refined products than refineries and consumers located on the coasts. Significant changes in U.S. distribution patterns for crude and refined products are reshaping the pipeline infrastructure and presenting challenges and opportunities for domestic refiners. These changes are discussed.

  4. Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    250 Energy Information AdministrationPetroleum Marketing Annual 1998 Table 44. Refiner Motor Gasoline Volumes by Formulation, Sales Type, PAD District, and State (Thousand Gallons...

  5. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (or bandwidth) of potential energy savings opportunities. This bandwidth study examines energy consumption and potential energy savings opportunities in U.S. petroleum refining....

  6. ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Efficiency Roadmap for Petroleum Refineries in California ITP Petroleum Refining: Energy Efficiency Roadmap for Petroleum Refineries in California refiningroadmap.pdf More...

  7. New Process for Grain Refinement of Aluminum. Final Report

    SciTech Connect (OSTI)

    Dr. Joseph A. Megy

    2000-09-22

    A new method of grain refining aluminum involving in-situ formation of boride nuclei in molten aluminum just prior to casting has been developed in the subject DOE program over the last thirty months by a team consisting of JDC, Inc., Alcoa Technical Center, GRAS, Inc., Touchstone Labs, and GKS Engineering Services. The Manufacturing process to make boron trichloride for grain refining is much simpler than preparing conventional grain refiners, with attendant environmental, capital, and energy savings. The manufacture of boride grain refining nuclei using the fy-Gem process avoids clusters, salt and oxide inclusions that cause quality problems in aluminum today.

  8. ITP Petroleum Refining: Petroleum Technology Vision 2020 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Petroleum Technology Vision 2020 ITP Petroleum Refining: Petroleum Technology Vision 2020 techvision.pdf More Documents & Publications Manufacturing Energy and Carbon Footprint...

  9. Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type...

    U.S. Energy Information Administration (EIA) Indexed Site

    of table. 134 Energy Information AdministrationPetroleum Marketing Annual 1999 Table 35. Refiner Motor Gasoline Prices by Grade, Sales Type, PAD District, and State (Cents per...

  10. Optimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries

    E-Print Network [OSTI]

    Mohsenian-Rad, Hamed

    the industry is a manufacturing unit (e.g., automotive, food, pulp-and-paper, chemicals, refining, and iron. In this paper, we investigate optimal load control for industrial load which involves several new and distinctOptimal Industrial Load Control in Smart Grid: A Case Study for Oil Refineries Armen Gholian, Hamed

  11. Emerging Energy-Efficient Technologies for Industry 

    E-Print Network [OSTI]

    Worrell, E.; Martin, N.; Price, L.; Ruth, M.; Elliott, N.; Shipley, A.; Thorn, J.

    2001-01-01

    consists of all industrial activity outside of agriculture, mining, and construction, accounts for 70% of industrial value added (4). In 1998, the United States consumed 94 Quadrillion Btu (99 EJ) of primary energy or 25% of world primary energy use..., mining, construction, energy intensive industries, and non-energy intensive manufacturing. Energy is necessary to help our industries create useful products; however, we are increasingly confronted with the challenge of moving society toward a...

  12. Refined knot invariants and Hilbert schemes

    E-Print Network [OSTI]

    Eugene Gorsky; Andrei Negu?

    2015-02-13

    We consider the construction of refined Chern-Simons torus knot invariants by M. Aganagic and S. Shakirov from the DAHA viewpoint of I. Cherednik. We give a proof of Cherednik's conjecture on the stabilization of superpolynomials, and then use the results of O. Schiffmann and E. Vasserot to relate knot invariants to the Hilbert scheme of points on the plane. Then we use the methods of the second author to compute these invariants explicitly in the uncolored case. We also propose a conjecture relating these constructions to the rational Cherednik algebra, as in the work of the first author, A. Oblomkov, J. Rasmussen and V. Shende. Among the combinatorial consequences of this work is a statement of the m/n shuffle conjecture.

  13. Processing factors contributing to growth and decline in the steel industry

    E-Print Network [OSTI]

    Dufalla, Michele (Michele Helene)

    2007-01-01

    During the second half of the twentieth century, a technological shift occurred in the steel industry. A different mix of refining and melting furnaces were used, with increasing use being made of basic oxygen and electric ...

  14. Minerals Yearbook: Minerals in the world economy. 1988 International review

    SciTech Connect (OSTI)

    Kimbell, C.L.; Zajac, W.L.

    1988-01-01

    In overview, 1988 appeared to be the best year for the world's mineral industry since 1980, although the all-important petroleum component suffered severely from low prices. With this notable exception, the traditional statistical measures of mineral industry performance, namely production, trade, and consumption, reflected growth in most elements of the world mineral industry from crude material extraction through the gamut of downstream processing. Moreover, the growth was reasonably well distributed geographically, with many countries sharing in the substantial upturn in activity. The report discusses production, trade, consumption, investment, transportation, prices, and statistical summary of world production and trade of major mineral commodities.

  15. Global Energy Efficient IT Equipment Industry 2015 Market Research...

    Open Energy Info (EERE)

    on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry...

  16. Global Shuttleless Loom Industry 2015 Market Research Report...

    Open Energy Info (EERE)

    on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry...

  17. Global Dicyandiamide Industry 2015 Market Research Report | OpenEI...

    Open Energy Info (EERE)

    on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry...

  18. Global High-purity Pentoxide Industry 2015 Market Research Report...

    Open Energy Info (EERE)

    on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry...

  19. Global POF Shrink Film Industry 2015 Market Research Report ...

    Open Energy Info (EERE)

    on. Then it analyzed the world's main region market conditions, including the product price, profit, capacity, production, capacity utilization, supply, demand and industry...

  20. The Hard Disk Drive Industry in the Philippines

    E-Print Network [OSTI]

    Gwendolyn R. Tecson

    1999-01-01

    Supply Industry in the Philippine Electrical and Electronicsla Cruz (ed. ) Japan- Philippine…Institute of Legal Studies,Law, University of the Philippines. World Bank (1993) “The

  1. Integrating Bioprocesses into Industrial Complexes for Sustainable Development

    E-Print Network [OSTI]

    Pike, Ralph W.

    development by world organiza)ons, countries and industries. #12;Carbon Dioxide Sequestration (CCS, bio-sequestration, chemical sequestration) Life Cycle Assessment (LCA) Eco-Efficiency Analysis

  2. On Adaptive Mesh Refinement for Atmospheric Pollution Models

    E-Print Network [OSTI]

    Sandu, Adrian

    On Adaptive Mesh Refinement for Atmospheric Pollution Models Emil M. Constantinescu and Adrian res- olution system for modeling regional air pollution based on the chemical transport model STEM. Keywords: Air Pollution Modeling, Adaptive Mesh Refinement. 1 Introduction Inadequate grid resolution can

  3. Specification and Refinement of a RealTime Control System

    E-Print Network [OSTI]

    Smith, Graeme

    such approach via the specification and refinement of the well­known Steam Boiler Control Problem. The case calculus [Fidge et al., 1998] through the specifi­ cation and refinement of the well­known Steam Boiler. These features, although not central to the Steam Boiler Control Problem, are typical of features which must

  4. Refining and End Use Study of Coal Liquids

    SciTech Connect (OSTI)

    1997-10-01

    This report summarizes revisions to the design basis for the linear programing refining model that is being used in the Refining and End Use Study of Coal Liquids. This revision primarily reflects the addition of data for the upgrading of direct coal liquids.

  5. Power the world's powers the world's economy.

    E-Print Network [OSTI]

    Power the world's economy BUSINESS #12;powers the world's economy. Put yourself in the driver. · A buyer, merchandiser, planner or manager in a retail operation. · The manager of a restaurant or food materials firm. · A marketer promoting a business, nonprofit organization or public agency. · A small

  6. Working together for a safer world

    E-Print Network [OSTI]

    Huang, Xun

    activity today. ...and over 100 years serving other industries across society from energy, rail, food Big data and its transformational effects #12;Topics · Lloyd's Register · Big Data · Data driven world, Energy +9,000 Employees worldwide Over 90 nationalities £1 billion Turnover 3 Regions: Asia, EMEA

  7. Foreign Fishery Developments World Salmon Farming

    E-Print Network [OSTI]

    economic and environmental conditions will permit such expansion of salmon farming industries. Norway besides Norway with a large and suc- cessful Atlantic salmon farming in- dustry. Production of pen-farmed salmon in other countries is not substantial, but continues to expand. Norway Norway is the world's most

  8. Changing System Interfaces Consistently: a New Refinement Strategy for CSP B

    E-Print Network [OSTI]

    Doran, Simon J.

    Changing System Interfaces Consistently: a New Refinement Strategy for CSP B Steve Schneider refinement in the context of CSP B. Our motivation to include this notion of refinement within the CSP B to change the events of a CSP process and the B machines when refining a system. Notions of refinement based

  9. Military Formations: Mexican American Civil Rights And Community Belonging During The World War II Era

    E-Print Network [OSTI]

    Bueno, Marianne

    2012-01-01

    Force Material Command Cold War Context, 1945-1991, vol. 2,and Job Politics during World War II. Austin: University ofin Earnings during World War II: New Evidence." Industrial

  10. At Work in The World

    E-Print Network [OSTI]

    Blanc, Paul D. MD; Dolan, Brian PhD

    2012-01-01

    Japan through social hygiene and industrial physiology. Theof occupational medicine and industrial hygiene. Abstractsoccupational medicine and industrial hygiene education. In

  11. OTHER INDUSTRIES

    Office of Energy Efficiency and Renewable Energy (EERE)

    AMO funded research results in novel technologies in diverse industries beyond the most energy intensive ones within the U.S. Manufacturing sector. These technologies offer quantifiable energy...

  12. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1988-05-17

    Apparatus is described for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight oxygen and not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom. 2 figs.

  13. Steel refining with an electrochemical cell

    DOE Patents [OSTI]

    Blander, M.; Cook, G.M.

    1985-05-21

    Disclosed is an apparatus for processing a metallic fluid containing iron oxide, container for a molten metal including an electrically conductive refractory disposed for contact with the molten metal which contains iron oxide, an electrolyte in the form of a basic slag on top of the molten metal, an electrode in the container in contact with the slag electrically separated from the refractory, and means for establishing a voltage across the refractory and the electrode to reduce iron oxide to iron at the surface of the refractory in contact with the iron oxide containing fluid. A process is disclosed for refining an iron product containing not more than about 10% by weight sulfur, comprising providing an electrolyte of a slag containing one or more of calcium oxide, magnesium oxide, silica or alumina, providing a cathode of the iron product in contact with the electrolyte, providing an anode in contact with the electrolyte electrically separated from the cathode, and operating an electrochemical cell formed by the anode, the cathode and the electrolyte to separate oxygen or sulfur present in the iron product therefrom.

  14. GRChombo : Numerical Relativity with Adaptive Mesh Refinement

    E-Print Network [OSTI]

    Clough, Katy; Finkel, Hal; Kunesch, Markus; Lim, Eugene A; Tunyasuvunakool, Saran

    2015-01-01

    Numerical relativity has undergone a revolution in the past decade. With a well-understood mathematical formalism, and full control over the gauge modes, it is now entering an era in which the science can be properly explored. In this work, we introduce GRChombo, a new numerical relativity code written to take full advantage of modern parallel computing techniques. GRChombo's features include full adaptive mesh refinement with block structured Berger-Rigoutsos grid generation which supports non-trivial "many-boxes-in-many-boxes" meshing hierarchies, and massive parallelism through the Message Passing Interface (MPI). GRChombo evolves the Einstein equation with the standard BSSN formalism, with an option to turn on CCZ4 constraint damping if required. We show that GRChombo passes all the standard "Apples-to-Apples" code comparison tests. We also show that it can stably and accurately evolve vacuum black hole spacetimes such as binary black hole mergers, and non-vacuum spacetimes such as scalar collapses into b...

  15. Goal: develop high-level decision-making optimization to predict structural modifications in refining and logistics assets using more rigorous formulations

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    , When to Invest? Only optimize streams transfers (oil and fuels import/export, market supply) + NLP Processing Blending Quantitative Methods for Strategic and Investment Planning in the Oil-Refining Industry capacity QC= total capacity Capital Investment Planning Formulation (R,U,N,T) R=Refinery U=Unit type N

  16. World Bio Markets

    Broader source: Energy.gov [DOE]

    Held in Amsterdam, Netherlands, the 10th anniversary World Bio Markets convened from March 1– 4, 2015.

  17. Studyatatop20 world university

    E-Print Network [OSTI]

    Applebaum, David

    Studyatatop20 world university www.kcl.ac.uk Opendayguide2015 #12;Welcome to King's College London Universities surveys. 6th in the UK Times Higher Education World University Rankings, 2014-15. If you want to make a difference and help shape the world in which we live, King's is the university for you. Ranked

  18. World Views From fragmentation

    E-Print Network [OSTI]

    World Views From fragmentation to integration Diederik Aerts Leo Apostel Bart De Moor Staf in 1994 by VUB Press: Brussels Internet edition by Clément Vidal and Alexander Riegler #12;World Views 2................................................................................................................... 5 1.1 The fragmentation of our world

  19. Manhattan World James Coughlan

    E-Print Network [OSTI]

    Yuille, Alan L.

    Manhattan World James Coughlan Smith-Kettlewell Eye Research Institute San Francisco, CA 94115 Alan@stat.ucla.edu In Neural Computation. Vol. 15. No. 5. pp 1063-1088. May. 2003. 1 #12;Manhattan World: Orientation are unaligned to the grid. To determine the applicability of the Manhattan world model we implement a null

  20. Scienceandthe DevelopingWorld

    E-Print Network [OSTI]

    -quality research and to provide education in order to promote science in the developing world. As we celebrate our to evolve in response to a changing world, initiating efforts where new priorities--and new potential and supporting science in the developing world. 2 New Research Areas: Develop new research areas

  1. Wireless World Research Forum

    E-Print Network [OSTI]

    Sasse, Angela

    Wireless World Research Forum Working Group 1 IEEE Communications Magazine Article Draft Considering the User in the Wireless World Authors: Ken Crisler (Motorola, US) Andrew Aftelak (Motorola, UK Dainesi (University of Pavia, Italy) Thea Turner (Motorola, US) #12;Abstract The Wireless World Research

  2. World Oil Prices in AEO2006 (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01

    World oil prices in the Annual Energy Outlook 2006 (AEO) reference case are substantially higher than those in the AEO2005 reference case. In the AEO2006 reference case, world crude oil prices, in terms of the average price of imported low-sulfur, light crude oil to U.S. refiners, decline from current levels to about $47 per barrel (2004 dollars) in 2014, then rise to $54 per barrel in 2025 and $57 per barrel in 2030. The price in 2025 is approximately $21 per barrel higher than the corresponding price projection in the AEO2005 reference case.

  3. Multigrid elliptic equation solver with adaptive mesh refinement

    E-Print Network [OSTI]

    J. David Brown; Lisa L. Lowe

    2005-03-22

    In this paper we describe in detail the computational algorithm used by our parallel multigrid elliptic equation solver with adaptive mesh refinement. Our code uses truncation error estimates to adaptively refine the grid as part of the solution process. The presentation includes a discussion of the orders of accuracy that we use for prolongation and restriction operators to ensure second order accurate results and to minimize computational work. Code tests are presented that confirm the overall second order accuracy and demonstrate the savings in computational resources provided by adaptive mesh refinement.

  4. Integrated process for the solvent refining of coal

    DOE Patents [OSTI]

    Garg, Diwakar (Macungie, PA)

    1983-01-01

    A process is set forth for the integrated liquefaction of coal by the catalytic solvent refining of a feed coal in a first stage to liquid and solid products and the catalytic hydrogenation of the solid product in a second stage to produce additional liquid product. A fresh inexpensive, throw-away catalyst is utilized in the second stage hydrogenation of the solid product and this catalyst is recovered and recycled for catalyst duty in the solvent refining stage without any activation steps performed on the used catalyst prior to its use in the solvent refining of feed coal.

  5. Reitveld refinement study of PLZT ceramics

    SciTech Connect (OSTI)

    Kumar, Rakesh; Bavbande, D. V.; Bafna, V. H.; Mohan, D.; Kothiyal, G. P.; Mishra, R.

    2013-02-05

    PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

  6. CATALYTIC CONVERSION OF SOLVENT REFINED COAL TO LIQUID PRODUCTS

    E-Print Network [OSTI]

    Tanner, K.I.

    2010-01-01

    I. Solvent Refined Coal II. Catalysts III. Purpose andSondreal, E.A. , "Viscosity of Coal Liquids - The Effect ofAnthraxylon - Kinetics of Coal Hydrogenation," Ind. and Eng.

  7. Error estimation and adaptive mesh refinement for aerodynamic flows

    E-Print Network [OSTI]

    Hartmann, Ralf

    Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann1 and Paul Houston, 38108 Braunschweig, Germany Ralf.Hartmann@dlr.de 2 School of Mathematical Sciences University

  8. Error estimation and adaptive mesh refinement for aerodynamic flows

    E-Print Network [OSTI]

    Hartmann, Ralf

    Error estimation and adaptive mesh refinement for aerodynamic flows Ralf Hartmann, Joachim Held), Lilien- thalplatz 7, 38108 Braunschweig, Germany, e-mail: Ralf.Hartmann@dlr.de 1 #12;2 Ralf Hartmann

  9. CATALYTIC CONVERSION OF SOLVENT REFINED COAL TO LIQUID PRODUCTS

    E-Print Network [OSTI]

    Tanner, K.I.

    2010-01-01

    E.A. , "Viscosity of Coal Liquids - The Effect of CharacterOF SOLVENT REFINED COAL TO LIQUID PRODUCTS Kylan I. Tanner*for Conversion of Coal to Liquid Fuels: Basic and Ex-

  10. Industry Economist

    Broader source: Energy.gov [DOE]

    A successful candidate in this position will report to the Manager of Load Forecasting and Analysis of the Customer Services Organization. He/she serves as an industry economist engaged in load...

  11. Minerals in the world economy. Minerals yearbook Volume 3. 1991 international review

    SciTech Connect (OSTI)

    Kimbell, C.L.

    1991-12-31

    This edition of the Minerals Yearbook - International Review records the performance of the worldwide minerals industry during 1991 and provides background information to assist in interpreting that performance. Volume III, International Review, contains the latest available mineral data on more than 150 foreign countries and discusses the importance of minerals to the economies of these nations. The 1991 review is presented as five area reports and one world overview: Mineral Industries of Africa, Mineral Industries of Asia and the Pacific, Mineral Industries of Latin America and Canada, Mineral Industries of Europe and the U.S.S.R., Mineral Industries of the Middle East, and Minerals in the World Economy.

  12. Benchmarks for industrial energy efficiency

    SciTech Connect (OSTI)

    Amarnath, K.R. [Electric Power Research Inst., Palo Alto, CA (United States); Kumana, J.D. [Linnhoff March, Inc., Houston, TX (United States); Shah, J.V. [Electric Power Research Inst., Pittsburgh, PA (United States). Chemicals and Petroleum Center

    1996-12-31

    What are the standards for improving energy efficiency for industries such as petroleum refining, chemicals, and glass manufacture? How can different industries in emerging markets and developing accelerate the pace of improvements? This paper discusses several case studies and experiences relating to this subject emphasizing the use of energy efficiency benchmarks. Two important benchmarks are discussed. The first is based on a track record of outstanding performers in the related industry segment; the second benchmark is based on site specific factors. Using energy use reduction targets or benchmarks, projects have been implemented in Mexico, Poland, India, Venezuela, Brazil, China, Thailand, Malaysia, Republic of South Africa and Russia. Improvements identified through these projects include a variety of recommendations. The use of oxy-fuel and electric furnaces in the glass industry in Poland; reconfiguration of process heat recovery systems for refineries in China, Malaysia, and Russia; recycling and reuse of process wastewater in Republic of South Africa; cogeneration plant in Venezuela. The paper will discuss three case studies of efforts undertaken in emerging market countries to improve energy efficiency.

  13. World pipeline work set for rapid growth

    SciTech Connect (OSTI)

    Not Available

    1992-08-01

    This paper reports on international pipeline construction which has entered a fast-growth period, accelerated by the new political and economic realities around the world and increasing demand for natural gas, crude oil and refined petroleum products. Many projects are under way or in planning for completion in the mid- to late 1990s in Europe, South America, Asia and the Middle East. Pipeline And Gas Journal's projection calls for construction or other work on 30,700 miles of new natural gas, crude oil and refined products pipelines in the 1992-93 period outside Canada and the U.S. These projects will cost an estimated $30 billion-plus. Natural gas pipelines will comprise most of the mileage, accounting for almost 23,000 miles at an estimated cost of $26.3 billion. Products pipelines, planned or under construction, will add another 5,800 miles at a cost of $2.8 billion. Crude oil pipelines, at a minimum, will total 1,900 new miles at a cost of slightly under $1 billion.

  14. Petroleum Refining Footprint, December 2010 (MECS 2006)

    SciTech Connect (OSTI)

    none,

    2010-06-01

    Manufacturing energy and carbon footprints map fuel energy consumption and losses, as well as greenhouse gas emissions from fuel consumption, for fifteen individual U.S. manufacturing sectors (representing 94% of all manufacturing energy use) and for the entire manufacturing industry sector. By providing energy consumption and emissions figures broken down by end use, the footprints allow for comparisons of energy use and emissions sources both within and across sectors. The footprints portray a large amount of information for each sector, including: * Comparison of the energy generated offsite and transferred to facilities versus that generated onsite * Nature and amount of energy consumed by end use within facilities * Magnitude of the energy lost both outside and inside facility boundaries * Magnitude of the greenhouse gas emissions released due to the combustion of fuel. Energy losses indicate opportunities to improve efficiency by implementing energy management best practices, upgrading energy systems, and developing new technologies. Footprints are available below for each sector. Data is presented in two levels of detail. The first page provides a high-level snapshot of the offsite and onsite energy flow, and the second page shows the detail for onsite generation and end use of energy. The energy data is primarily provided by the U.S. Department of Energy (DOE) Energy Information Administration's (EIA's) Manufacturing Energy Consumption Survey (MECS), and therefore reflects consumption in the year 2006, when the survey was last completed.

  15. Brane-world Cosmology

    SciTech Connect (OSTI)

    Wands, David [Institute of Cosmology and Gravitation, University of Portsmouth, Mercantile House, Portsmouth P01 2EG (United Kingdom)

    2006-06-19

    Brane-world models, where observers are restricted to a brane in a higher dimensional spacetime, offer a novel perspective on cosmology. I discuss some approaches to cosmology in extra dimensions and some interesting aspects of gravity and cosmology in brane-world models.

  16. A new approach to oil refining with allowance for ecological requirements

    SciTech Connect (OSTI)

    Nasirov, R.K.; Serikov, P.Yu.; Barsukov, O.V. [and others

    1994-12-01

    More stringent quality requirements are being imposed on oil fuels because of the deteriorating ecological situation. At the same time the new ecological constraints have slightly reduced the supplies of light crudes on the world market because the oil-producing countries have been forced to consume more of their best crudes and only heavier and sour crudes are sent to other countries for refining. In view of this, in recent years work has been focused on thorough refining of oil distillates and residues in a medium of hydrogen-containing gas in the presence of catalysts for hydrorefining and hydrocracking. Hydrorefining destroys sulfur-, nitrogen-, and oxygen-containing compounds of the stock, removes organometallic components, improves the ecological characteristics of the products, reduces the corrosion of the refinery equipment, and reduces atmospheric pollution. Hydrorefining units have been built at almost all refineries, with allowance for the above and the fact that the hydroprocesses are highly technologically suitable and controllable and produce almost no waste. A number of problems pertaining to hydroprocesses, interesting scientific results, and developed theoretical approaches to intensify hydrorefining processes are described.

  17. Automatic grid refinement criterion for lattice Boltzmann method

    E-Print Network [OSTI]

    Lagrava, Daniel; Latt, Joneas; Chopard, Bastien

    2015-01-01

    In all kinds of engineering problems, and in particular in methods for computational fluid dynamics based on regular grids, local grid refinement is of crucial importance. To save on computational expense, many applications require to resolve a wide range of scales present in a numerical simulation by locally adding more mesh points. In general, the need for a higher (or a lower) resolution is not known \\emph{a priori}, and it is therefore difficult to locate areas for which local grid refinement is required. In this paper, we propose a novel algorithm for the lattice Boltzmann method, based on physical concepts, to automatically construct a pattern of local refinement. We apply the idea to the two-dimensional lid-driven cavity and show that the automatically refined grid can lead to results of equal quality with less grid points, thus sparing computational resources and time. The proposed automatic grid refinement strategy has been implemented in the parallel open-source library Palabos.

  18. Office of Industrial Technologies research in progress

    SciTech Connect (OSTI)

    Not Available

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  19. Projected refined product balances in key Latin American countries: A preliminary examination

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    Over the years, the East-West Center (EWC) has developed considerable expertise in refinery modeling, especially in the area of forecasting product balances for countries, given planned capacity changes, changes in product demand, changes in crude slates, and changes in product specifications. This expertise has been applied on an ongoing basis to the major refiners in the Middle East and the Asia-Pacific region, along with the US West Coast as region in its own right. Refinery modeling in these three areas has been ongoing for nearly 15 years at the Center, and the tools and information sources are now well developed. To date, the EWC has not applied these tools to Latin America. Although research on Latin America has been an ongoing area of concern at the Center in recent years, the information gathered to date is still not of the level of detail nor quality available for other areas. The modeling efforts undertaken in this report are of a ``baseline`` nature, designed to outline the major issues, attempt a first cut at emerging product balances, and, above all, to elicit commentary from those directly involved in the oil industry in the key countries modeled. Our experience in other regions has shown that it takes a few years dialogue with refiners and government planner in individual countries to develop a reliable database, as well as the insights into operational constraints and practices that make accurate modeling possible. This report is no more than a first step down the road.

  20. What Shall We Build? (Examination of the Engineering Profession and its role in Establishing a Just World Order)

    E-Print Network [OSTI]

    a Just World Order) Daniel R. Lynch1 8 November 2002 Kroc Institute Occasional Paper # XXX Preface......................................................................................................9 New Rights in an Industrial World technological process); and that human rights and worldwide justice are the authentic metrics of success. New

  1. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    required for quantifying energy efficiency impacts andsulfur, nitrogen and energy flows through the individual Refineries 2010 data, Energy Information Administration (

  2. Industrial Decision Making- Improving Petroleum Refining Performance through Better Economic Performance Analysis 

    E-Print Network [OSTI]

    Mergens, E. H.

    1997-01-01

    product, safely, at the lowest raw material use and operating cost. The manner in which efficient plant performance is attained entails not only having a clearly identified goal. There must be a realistic and reliable means of measuring plant expenses...

  3. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    vacuum and coker gas oils, though some units in the U.S.and coker gas oil; Diesel Hydrotreating Unit (DTU) whichcoker diesel, and cat diesel streams; Kerosene Hydrotreating Unit (

  4. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    24  3.4 Hydrocracking Unit (Unit HCU - HTU - HYS - Hydrocracking Unit Hydrotreating Unitcatalytic cracking, hydrocracking and coking processes are

  5. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    a refinery: coking, catalytic cracking and hydrocracking,hydrocracking and coking processes are the most complex processes found in a refinery.refineries also process residual oils in specially designed hydrocracking

  6. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    introduction of biomass feedstocks. However, these optionsthe example of adding biomass feedstocks processing), or be

  7. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    distillation, petroleum coking, catalytic cracking, hydrocracking, hydrotreating (catalytic cracker feed/diesel/kerosene/naphtha/gasoline),

  8. From Refining Sugar to Growing Tomatoes: Industrial Ecology and Business Model Evolution

    E-Print Network [OSTI]

    Short, Samuel W.; Bocken, Nancy M. P.; Barlow, Claire Y.; Chertow, Marian R.

    2014-10-13

    to 40,000 t Soft drinks producers, fire protection sector Electricity British Sugar 320,000 MWh Energy suppliers 4.6 Ecological benefits realized Table 3 provides a quantitative assessment of the major ecological benefits realized... in the UK with an 85.4% market share (IBISWorld 2013b). Also viewed as the most efficient beet sugar factory in Europe (IBISWorld 2013b) “Co- Products” Animal feed Trident (Now a subsidiary of AB Agri, part of the AB Food group) 140,000 t UK...

  9. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    AKU - Alkylation Unit BFW - Boiler Feed Water CCU CDU CKUrefinery offsites (e.g. , boiler efficiency improvements)PJ)  1  Reduce stand?by boiler requirements  Reduce hot 

  10. Assessment of Energy Efficiency Improvement in the United States Petroleum Refining Industry

    E-Print Network [OSTI]

    Morrow III, William R.

    2014-01-01

    http://www.eia.gov/petroleum/ Energetics, 2007, Energy andEnergetics, 2006, Energy Bandwidth for Petroleum Refiningnature of the petroleum refinery, energy abatement measures

  11. An Industrial Membrane System Suitable for Distributed Used Oil Re-refining

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y AEfficiencyEnergy 2:00PMEnergy Office of

  12. Survey shows over 1,000 refining catalysts

    SciTech Connect (OSTI)

    Rhodes, A.K.

    1991-10-14

    The Journal's latest survey of worldwide refining catalysts reveals that there are more than 1,040 unique catalyst designations in commercial use in 19 processing categories - an increase of some 140 since the compilation of refining catalysts was last published. As a matter of interest, some 700 catalysts were determined during the first survey. The processing categories surveyed in this paper are: Catalytic naphtha reforming. Dimerization, Isomerization (C{sub 4}), Isomerization (C{sub 5} and C{sub 6}), Isomerization (xylenes), Fluid catalytic cracking (FCC), Hydrocracking, Mild hydrocracking, hydrotreating/hydrogenation/ saturation, Hydrorefining, Polymerization, Sulfur (elemental) recovery, Steam hydrocarbon reforming, Sweetening, Clause unit tail gas treatment, Oxygenates, Combustion promoters (FCC), Sulfur oxides reduction (FCC), and Other refining processes.

  13. World NGL markets continue rapid expansion

    SciTech Connect (OSTI)

    Otto, K.; Gist, R.; Whitley, C.; Haun, R.

    1998-06-08

    The international LPG industry has expanded rapidly during the 1990s and undergone significant changes. LPG consumption has expanded at nearly twice the rate of world petroleum demand. In particular, LPG use in residential and commercial markets has more than doubled in many developing countries. Markets for LPG and other petroleum products have been opened in many countries, accelerating demand growth and creating investment opportunities in all downstream segments. This has led to an overall strengthening of global LPG pricing and the development of many new export gas-processing projects. The paper discusses world LPG demand in residential and commercial markets and in petrochemicals, world LPG supply, regional increases, international trade, the US situation in natural gas, NGL supply, and NGL demand.

  14. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II.

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state's total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation's energy production and refining capability. California is the recipient and refines most of Alaska's 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  15. Trends in heavy oil production and refining in California

    SciTech Connect (OSTI)

    Olsen, D.K.; Ramzel, E.B.; Pendergrass, R.A. II

    1992-07-01

    This report is one of a series of publications assessing the feasibility of increasing domestic heavy oil production and is part of a study being conducted for the US Department of Energy. This report summarizes trends in oil production and refining in Canada. Heavy oil (10{degrees} to 20{degrees} API gravity) production in California has increased from 20% of the state`s total oil production in the early 1940s to 70% in the late 1980s. In each of the three principal petroleum producing districts (Los Angeles Basin, Coastal Basin, and San Joaquin Valley) oil production has peaked then declined at different times throughout the past 30 years. Thermal production of heavy oil has contributed to making California the largest producer of oil by enhanced oil recovery processes in spite of low oil prices for heavy oil and stringent environmental regulation. Opening of Naval Petroleum Reserve No. 1, Elk Hills (CA) field in 1976, brought about a major new source of light oil at a time when light oil production had greatly declined. Although California is a major petroleum-consuming state, in 1989 the state used 13.3 billion gallons of gasoline or 11.5% of US demand but it contributed substantially to the Nation`s energy production and refining capability. California is the recipient and refines most of Alaska`s 1.7 million barrel per day oil production. With California production, Alaskan oil, and imports brought into California for refining, California has an excess of oil and refined products and is a net exporter to other states. The local surplus of oil inhibits exploitation of California heavy oil resources even though the heavy oil resources exist. Transportation, refining, and competition in the market limit full development of California heavy oil resources.

  16. A world-classuniversity in aWorld Heritage city

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    A world-classuniversity in aWorld Heritage city strategy university 2013-16 #12;shapingour future-choiceuniversityforstudentsworldwide.Weoffer adistinctiveblendofacademicreputation,anoutstandinggraduate employmentrecord,world-classsportsfacilities,andafullprogramme ofsocial our alumni, research and strategic partnerships. A world-class university in a World Heritage city

  17. Argentina`s nuclear industry

    SciTech Connect (OSTI)

    NONE

    1988-02-01

    Argentina occupies a somewhat unusual position among the world`s nuclear nations, in that, while possessing a rather diverse nuclear industry, it has managed to remain largely outside the system of international controls, and is not a signatory of the Nuclear Non-Proliferation Treaty. Argentina currently has two operating reactors, Atucha Unit 1 (335-MWe PHWR) and Embalse (600-MWe CANDU), with another under unit, Atucha Unit 2 (698-MWe PHWR) under construction. Commercial nuclear development is primarily under the control of the Comision Nacional de Energia Atomica (CNEA), which also manages a modest uranium production industry. Fuel cycle facilities, notably an enrichment plant at Pilcaniyeu and a pilot reprocessing plant at Ezeiza, are under development.

  18. WORLD EDITOR TRAINING GUIDE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    when selected. 4. In the panel on the right-hand side of the World Editor, select the Browser Tree tab (the tab turns blue when it is active). 5. In the Browser Tree hierarchy...

  19. MIT and Automotive Industries MIT Industry Brief

    E-Print Network [OSTI]

    Herr, Hugh

    MIT and Automotive Industries MIT Industry Brief MIT's Industrial Liaison Program (ILP) can bring@ilp.mit.edu, or visit http://ilp.mit.edu. MIT and Automotive Industries The Massachusetts Institute of Technology (MIT) is a leading center of research and education on topics important to the automotive industry and its suppliers

  20. Photovoltaic industry progress through 1984

    SciTech Connect (OSTI)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  1. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    1996. COREX, Revolution in Ironmaking, Linz, Austria:VAI. ;GJ/t Material Preparation Ironmaking Sintering PelletizingGJ/t Material Preparation Ironmaking Sintering Pelletizing

  2. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    5 2.1.1 Blast Furnace – BasicOxygen Furnace Route……………………….Basic Oxygen Furnace………………………… 10 2.1.3 Direct Reduced

  3. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    in a back-pressure steam turbine to generate electricity (compressor uses a steam turbine, using internally generatedwith a gas turbine, producing steam and electricity. The hot

  4. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    ammonia is made from heavy oil and coal, which is much lessfeedstock, followed by heavy oil, which requires an averagepartial oxidization of heavy fuel oil, gasification of coal,

  5. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    Cement Portland Cement Fly Ash Cement Blast Furnace SlagCement Portland Cement Fly Ash Cement Blast Furnace SlagCEM II), up to 35% can be fly ash and 65% clinker; for blast

  6. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    15 2.1.5 Casting……………………………………………………………….. 16 2.1.6 Rolling20 2.2.4 Ingot Casting…………………………………………………………. 20 2.2.5smelting, and ingot casting. This assessment excludes

  7. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    iron and steel, petroleum and petrochemical, chemical, non-ferrous metal, building materials, pulp and paper, electricity production, coal mining,

  8. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    feedstock, followed by heavy oil, which requires an averageammonia is made from heavy oil and coal, which is much lesspartial oxidization of heavy fuel oil, gasification of coal,

  9. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    steam cracking and alternative processes,” Energy 31 (2006),steam cracking and alternative processes,” Energy 31 (2006),steam cracking and alternative processes,” Energy 31 (2006),

  10. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    feedstock would use a coal gasifier to convert the coal tosynthesis gas. Most coal gasifier-based ammonia plants areof a modern entrained bed gasifier, selexol gas cleanup and

  11. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    energy includes electricity generation, transmission, andenergy includes electricity generation, transmission, andenergy includes electricity generation, transmission, and

  12. World Best Practice Energy Intensity Values for Selected Industrial Sectors

    E-Print Network [OSTI]

    Worrell, Ernst; Price, Lynn; Neelis, Maarten; Galitsky, Christina; Zhou, Nan

    2007-01-01

    products such as propylene, butadiene and aromatics are co-ethylene, propylene, and butadiene) are separated usingHVC Propylene – HVC Butadiene – HVC Aromatics and C4+ –HVC

  13. Interval methods for computing various refinements of Nash equilibria

    E-Print Network [OSTI]

    Sainudiin, Raazesh

    Interval methods for computing various refinements of Nash equilibria Bartlomiej Jacek Kubica, assumptions on their knowledge, ... Concepts: Dominant strategy equilibrium. The Nash equilibrium. The core of a game (for cooperative games). ... #12;Nash equilibrium Let the game (X1 ,...,Xn ;q1 ,...,qn

  14. UNIVERSITY OF CALGARY Refined Freeman-Durden for Harvest Detection

    E-Print Network [OSTI]

    Calgary, University of

    detection in rice paddy fields. However, harvest detection for other crops without a smooth underlying water#12;UNIVERSITY OF CALGARY Refined Freeman-Durden for Harvest Detection using PolSAR data by Sina is one of the main challenges of the current century. Harvest detection, as an input for decision making

  15. Refinement of Hybrid Systems from Formal Models to Design Languages

    E-Print Network [OSTI]

    Cengarle, María Victoria

    of high-level design of a control system, it is highly desirable to use representations that accuratelyRefinement of Hybrid Systems from Formal Models to Design Languages Jan Romberg Systems & Software Abstract System-level design for discrete-continuous embedded systems is a complex and error- prone task

  16. routing, Internet, BGP Internet Expansion, Refinement and Churn

    E-Print Network [OSTI]

    California at San Diego, University of

    routing, Internet, BGP Internet Expansion, Refinement and Churn ANDRE BROIDO, EVI NEMETH, KC CLAFFY measures reflect contributions of opposite sign, and that true measure of variation, or churn, is the sum a standalone prefix to a root prefix) are instances of routing system churn. One advantage of using our notion

  17. routing, Internet, BGP Internet Expansion, Refinement and Churn

    E-Print Network [OSTI]

    California at San Diego, University of

    routing, Internet, BGP Internet Expansion, Refinement and Churn ANDRE BROIDO, EVI NEMETH, KC CLAFFY contributions of opposite sign, and that true measure of variation, or churn, is the sum of their absolute a standalone prefix to a root prefix) are instances of routing system churn. One advantage of using our notion

  18. Department of Computing Stepwise Refinement in Event-B||CSP

    E-Print Network [OSTI]

    Doran, Simon J.

    in Event-B||CSP Part 1: Safety Steve Schneider, Helen Treharne and Heike Wehrheim March 12th 2011 #12;Stepwise Refinement in Event-B CSP Part 1: Safety Steve Schneider1 Helen Treharne1 Heike Wehrheim2 1, 2011 Contents 1 Introduction 3 2 CSP 3 2.1 Notation

  19. TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass

    E-Print Network [OSTI]

    California at Riverside, University of

    TOPICAL PAPER Potential Synergies and Challenges in Refining Cellulosic Biomass to Fuels, Chemicals Hampshire 03755 Lignocellulosic biomass such as agricultural and forestry residues and dedicated crops that outweigh increased biomass transport costs for facilities processing less than about 10,000 dry tons per

  20. World’s Largest Solar Energy Project Heads to Mojave

    Broader source: Energy.gov [DOE]

    A California company will harness the Mojave Desert sunshine to create the world’s largest solar energy system by the end of 2013.

  1. Impact of product design choices on supply chain performance in the notebook computer industry

    E-Print Network [OSTI]

    Sailer, Chad (Chad Darren)

    2010-01-01

    Intel Corporation is the world's leading manufacturer of processors for personal computers. As the company strives to maintain its leadership position in this industry, it identifies significant trends in the industry and ...

  2. The Taiwanese Notebook Computer Production Network in China: Implication for Upgrading of the Chinese Electronics Industry

    E-Print Network [OSTI]

    Yang, Yungkai

    2006-01-01

    Learning the Technology of Electronics. ” World Development,Underdevelopment of Malaysian Electronics. ” Paper for the 3Series No. 15. China Electronics Industry Yearbook, 2004.

  3. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeat Pumps Heat Pumpsfacility doe logoInIndustry @ ALS

  4. Industrial Permit

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,ImpactScientific andIndividualEvent Sign InIndustrial

  5. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy,ImpactScientific andIndividualEvent SignIndustrial Users -

  6. Industry Economists

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural GasNatural GasEIA lowerslong4,Guide toHighHowIndustry

  7. Introduction Actual Industrial Problems

    E-Print Network [OSTI]

    Nigam, Nilima

    Introduction Actual Industrial Problems What's needed? Is there really interesting mathematics in Industry? Can mathematicians contribute to society, and do we want to...? Nilima Nigam Department Mathematics in Industry #12;Introduction Actual Industrial Problems What's needed? Some controversial

  8. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board October 15, 2010 #12;Mechanical & Industrial Engineering 2 MIE Dorothy Adams Undergraduate/Graduate Secretary David Schmidt Associate Professor & Graduate Program Director #12;Mechanical & Industrial Engineering 3 MIE James Rinderle

  9. RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company...

    Energy Savers [EERE]

    RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc.Commonwealth of Puerto Rico RFA-14-0001 - In the Matter of Commonwealth Oil Refining Company, Inc....

  10. Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  11. New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants New Seismic Model Will Refine Hazard Analysis at U.S. Nuclear Plants January 31, 2012 - 2:09pm Addthis The...

  12. Development of miscella refining process for cottonseed oil-isopropyl alcohol system: laboratory-scale evaluations 

    E-Print Network [OSTI]

    Chau, Chi-Fai

    1994-01-01

    A technologically feasible cottonseed oil-isopropyl alcohol (IPA) miscella refining process was developed to produce high quality cottonseed oil. Individual steps necessary to refine cottonseed oil-IPA miscella were determined and improved...

  13. Third-Party Evaluation of Petro Tex Hydrocarbons, LLC, ReGen Lubricating Oil Re-refining Process

    SciTech Connect (OSTI)

    Compere, A L; Griffith, William {Bill} L

    2009-04-01

    This report presents an assessment of market, energy impact, and utility of the PetroTex Hydrocarbons, LLC., ReGen process for re-refining used lubricating oil to produce Group I, II, and III base oils, diesel fuel, and asphalt. PetroTex Hydrocarbons, LLC., has performed extensive pilot scale evaluations, computer simulations, and market studies of this process and is presently evaluating construction of a 23 million gallon per year industrial-scale plant. PetroTex has obtained a 30 acre site in the Texas Industries RailPark in Midlothian Texas. The environmental and civil engineering assessments of the site are completed, and the company has been granted a special use permit from the City of Midlothian and air emissions permits for the Texas Commission on Environmental Quality.

  14. Energy Efficiency Improvement Opportunities for the Cement Industry

    E-Print Network [OSTI]

    Worrell, Ernst

    2008-01-01

    Emissions from the Global Cement Industry, Annual Review ofBösche, A. , 1993. “Variable Speed Drives in Cement Plants,”World Cement 6 24 pp.2- Buzzi, S. 1997. Die Horomill® - Eine

  15. The changing competitive landscape of the smartphone industry

    E-Print Network [OSTI]

    Ogunsanwo, Olumide

    2012-01-01

    Since the first truly portable phone was released in 1983, mobile phone usage has increased at unprecedented rates around the world. Despite this general industry growth, the smartphone subsector has achieved significantly ...

  16. Canada’s Bitumen Industry Under CO2 Constraints

    E-Print Network [OSTI]

    Chen, Y.-H. Henry

    We investigate the effects of implementing CO2 emissions reduction policies on Canada’s oil sands industry, the largest of its kind in the world. The production of petroleum products from oils sands involves extraction of ...

  17. Engineering Industrial & Systems

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial Engineering Department of Industrial & Systems Engineering Leslie Monplaisir, Ph powerful tool sets used in industry today. -Brent Gillett, BSIE 2007 Advanced Planning Engineer at BMW I is available at: http://ise.wayne.edu/bs-industrial/index What is Industrial Engineering? The industrial

  18. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. Industrial engineers design and run the factories and systems

  19. INDUSTRIAL ENGINEERING Industrial engineering is concerned

    E-Print Network [OSTI]

    INDUSTRIAL ENGINEERING Industrial engineering is concerned with looking at the "big picture" of systems that allow organizations and individuals to perform at their best. Industrial engineers bridge should be used and how they should be used. The focus of industrial engineering is on process improvement

  20. World energy consumption

    SciTech Connect (OSTI)

    NONE

    1995-12-01

    Historical and projected world energy consumption information is displayed. The information is presented by region and fuel type, and includes a world total. Measurements are in quadrillion Btu. Sources of the information contained in the table are: (1) history--Energy Information Administration (EIA), International Energy Annual 1992, DOE/EIA-0219(92); (2) projections--EIA, World Energy Projections System, 1994. Country amounts include an adjustment to account for electricity trade. Regions or country groups are shown as follows: (1) Organization for Economic Cooperation and Development (OECD), US (not including US territories), which are included in other (ECD), Canada, Japan, OECD Europe, United Kingdom, France, Germany, Italy, Netherlands, other Europe, and other OECD; (2) Eurasia--China, former Soviet Union, eastern Europe; (3) rest of world--Organization of Petroleum Exporting Countries (OPEC) and other countries not included in any other group. Fuel types include oil, natural gas, coal, nuclear, and other. Other includes hydroelectricity, geothermal, solar, biomass, wind, and other renewable sources.

  1. World Cup Blues

    E-Print Network [OSTI]

    Hacker, Randi

    2010-08-18

    Broadcast Transcript: World Cup. 1966. North Korea stuns soccer fans by becoming the first Asian team ever to advance to the quarterfinals where they go up 3-0 against Portugal before finally being defeated at the hands--or rather feet...

  2. oxford world's classics PHILOSOPHICAL CRUMBS

    E-Print Network [OSTI]

    Doyle, Robert

    oxford world's classics REPETITION and PHILOSOPHICAL CRUMBS Søren Aabye Kierkegaard (1813:29:34 PM #12;oxford world's classics For over 100 years Oxford World's Classics have brought readers closer to the world's great literature. Now with over 700 titles --from the 4,000-year-old myths of Mesopotamia

  3. Evidence of OPEC pricing power: raw materials or refined products

    SciTech Connect (OSTI)

    Not Available

    1988-09-30

    For eight years, US petroleum and consumer sectors have argued for or against a free-market policy where international trade is concerned. Briefly, between 1982 and 1985, the argument against importation of refined products was almost as heated as the argument against importation of crude. But since the 1986 crude oil price crash, much has changed. Some contemporary thinking is that as long as the US can count on low crude prices, the benefits will outweigh the detriment to the US crude producing sector. This issue also contains the following: (1) ED refining netback data series for the US Gulf and West Coasts, Rotterdam, and Singapore for late September 1988; and (2) ED fuel price/tax series for countries of the Eastern Hemisphere, September 1988 edition. 8 figures, 5 tables.

  4. Canadian refiner finds simple route to reformulated gasoline production

    SciTech Connect (OSTI)

    Walsh, B. [North Atlantic Refining Ltd., Come By Chance, Newfoundland (Canada); McDonald, G.W.G. [IONA Ltd., Sarasota, FL (United States); Perkins, J.D. [United Catalysts Inc., Louisville, KY (United States)

    1997-03-17

    North Atlantic Refining Ltd. (NARL) operates a 105,000 b/sd hydrocracking refinery at Come By Chance, Newfoundland. NARL sells gasoline into markets in Newfoundland and the northeastern US. When the US Environmental Protection Agency instituted reformulated gasoline (RFG) requirements as part of the Clean Air Act amendments of 1990, NARL had to find a way to meet the specifications, even though the refinery is not within US territory. The refiner chose to add a small hydrogenation unit to treat the portion of the reformate stream containing benzene precursors. Since start-up of the unit in late 1995, it has achieved 100% benzene hydrogenation, thus allowing NARL to easily produce RFG containing less than 1.0 vol% benzene. The paper discusses procurement, hydrogen supply, catalyst, special features, start-up, operations, and process control.

  5. Industrial ecology Prosperity Game{trademark}

    SciTech Connect (OSTI)

    Beck, D.; Boyack, K.; Berman, M.

    1998-03-01

    Industrial ecology (IE) is an emerging scientific field that views industrial activities and the environment as an interactive whole. The IE approach simultaneously optimizes activities with respect to cost, performance, and environmental impact. Industrial Ecology provides a dynamic systems-based framework that enables management of human activity on a sustainable basis by: minimizing energy and materials usage; insuring acceptable quality of life for people; minimizing the ecological impact of human activity to levels that natural systems can sustain; and maintaining the economic viability of systems for industry, trade and commerce. Industrial ecology applies systems science to industrial systems, defining the system boundary to incorporate the natural world. Its overall goal is to optimize industrial activities within the constraints imposed by ecological viability, globally and locally. In this context, Industrial systems applies not just to private sector manufacturing and services but also to government operations, including provision of infrastructure. Sandia conducted its seventeenth Prosperity Game{trademark} on May 23--25, 1997, at the Hyatt Dulles Hotel in Herndon, Virginia. The primary sponsors of the event were Sandia National Laboratories and Los Alamos National Laboratory, who were interested in using the format of a Prosperity Game to address some of the issues surrounding Industrial Ecology. Honorary game sponsors were: The National Science Foundation; the Committee on Environmental Improvement, American Chemical Society; the Industrial and Engineering Chemistry Division, American Chemical Society; the US EPA--The Smart Growth Network, Office of Policy Development; and the US DOE-Center of Excellence for Sustainable Development.

  6. REFINING AND END USE STUDY OF COAL LIQUIDS

    SciTech Connect (OSTI)

    Unknown

    2002-01-01

    This document summarizes all of the work conducted as part of the Refining and End Use Study of Coal Liquids. There were several distinct objectives set, as the study developed over time: (1) Demonstration of a Refinery Accepting Coal Liquids; (2) Emissions Screening of Indirect Diesel; (3) Biomass Gasification F-T Modeling; and (4) Updated Gas to Liquids (GTL) Baseline Design/Economic Study.

  7. Refining Bio-Oil alongside Petroleum | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report Appendices |ProjectKnowRedox Shuttle Additive, WinsRefining

  8. Emergent Properties Do Not Refine Fiona Polack, Susan Stepney1,2

    E-Print Network [OSTI]

    Stepney, Susan

    Emergent Properties Do Not Refine Fiona Polack, Susan Stepney1,2 Department of Computer Science a demonstrably-correct development from an abstract specification. Emergent systems present an interesting to the traditional model of refinement. Keywords: Emergence, Refinement, Systems Engineering. 1 Introduction Our

  9. Refinement and verification of concurrent systems specified in ObjectZ and CSP

    E-Print Network [OSTI]

    Smith, Graeme

    Refinement and verification of concurrent systems specified in Object­Z and CSP Graeme Smith­Z and CSP. A common semantic basis for the two languages enables a unified method of refinement to be used, based upon CSP refinement. To enable state­based techniques to be used for the Object­Z components

  10. Lattice refining loop quantum cosmology, anisotropic models, and stability

    SciTech Connect (OSTI)

    Bojowald, Martin; Cartin, Daniel; Khanna, Gaurav [Institute for Gravitation and the Cosmos, Pennsylvania State University, 104 Davey Lab, University Park, Pennsylvania 16802 (United States); Naval Academy Preparatory School, 197 Elliot Street, Newport, Rhode Island 02841 (United States); Physics Department, University of Massachusetts at Dartmouth, North Dartmouth, Massachusetts 02747 (United States)

    2007-09-15

    A general class of loop quantizations for anisotropic models is introduced and discussed, which enhances loop quantum cosmology by relevant features seen in inhomogeneous situations. The main new effect is an underlying lattice which is being refined during dynamical changes of the volume. In general, this leads to a new feature of dynamical difference equations which may not have constant step-size, posing new mathematical problems. It is discussed how such models can be evaluated and what lattice refinements imply for semiclassical behavior. Two detailed examples illustrate that stability conditions can put strong constraints on suitable refinement models, even in the absence of a fundamental Hamiltonian which defines changes of the underlying lattice. Thus, a large class of consistency tests of loop quantum gravity becomes available. In this context, it will also be seen that quantum corrections due to inverse powers of metric components in a constraint are much larger than they appeared recently in more special treatments of isotropic, free scalar models where they were artificially suppressed.

  11. Parallel Block Structured Adaptive Mesh Refinement on Graphics Processing Units

    SciTech Connect (OSTI)

    Beckingsale, D. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Gaudin, W. P. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Hornung, R. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gunney, B. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gamblin, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Herdman, J. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom); Jarvis, S. A. [Atomic Weapons Establishment (AWE), Aldermaston (United Kingdom)

    2014-11-17

    Block-structured adaptive mesh refinement is a technique that can be used when solving partial differential equations to reduce the number of zones necessary to achieve the required accuracy in areas of interest. These areas (shock fronts, material interfaces, etc.) are recursively covered with finer mesh patches that are grouped into a hierarchy of refinement levels. Despite the potential for large savings in computational requirements and memory usage without a corresponding reduction in accuracy, AMR adds overhead in managing the mesh hierarchy, adding complex communication and data movement requirements to a simulation. In this paper, we describe the design and implementation of a native GPU-based AMR library, including: the classes used to manage data on a mesh patch, the routines used for transferring data between GPUs on different nodes, and the data-parallel operators developed to coarsen and refine mesh data. We validate the performance and accuracy of our implementation using three test problems and two architectures: an eight-node cluster, and over four thousand nodes of Oak Ridge National Laboratory’s Titan supercomputer. Our GPU-based AMR hydrodynamics code performs up to 4.87× faster than the CPU-based implementation, and has been scaled to over four thousand GPUs using a combination of MPI and CUDA.

  12. Industrial process heat market assessment

    SciTech Connect (OSTI)

    Bresnick, S.

    1981-12-01

    This report is designed to be a reference resource, giving a broad perspective of the potential HTGR market for industrial process heat. It is intended to serve as a briefing document for those wishing to obtain background information and also to serve as a starting point from which more detailed and refined studies may be undertaken. In doing so, the report presents a qualitative and quantitative description of the industrial process heat market in the US, provides a summary discussion of cogeneration experience to date, and outlines the existing institutional and financial framework for cogeneration. The intent is to give the reader an understanding of the current situation and experience in this area. The cogeneration area in particular is an evolving one because of regulations and tax laws, which are still in the process of being developed and interpreted. The report presents the latest developments in regulatory and legislative activities which are associated with that technology. Finally, the report presents a brief description of the three HTGR systems under study during the current fiscal year and describes the specific market characteristics which each application is designed to serve.

  13. Integrating Fermentation and Transesterification Industrial Scale Processes

    E-Print Network [OSTI]

    Pike, Ralph W.

    for polymers and chemical intermediates 1 Approximately 1% of global energy market and 3% of global oil an integration of these aspects by world organizations, countries and industries. #12;Corporate SustainabilityCorporate Sustainability · A company's success depends on maximizing the profit as expressed below. Profit = Product Sales

  14. Table 19. U.S. Refiner Residual Fuel Oil Prices

    U.S. Energy Information Administration (EIA) Indexed Site

    January 1983 forward; Form EIA-460, "Petroleum Industry Monthly Report for Product Prices," source for backcast estimates prior to January 1983. 36 Energy Information...

  15. Electricity Innovation and Health Care in the Developing World

    E-Print Network [OSTI]

    Hall, Sharon J.

    for a new energy education policy pathway for electricity innovation. Mechtenberg's research focusesElectricity Innovation and Health Care in the Developing World Friday, December 7, 2012 12:00 - 1 and Industrial Engineering, Northeastern University Unreliable electrical infrastructures threaten global health

  16. Biofuels' Time of Transition Achieving high performance in a world

    E-Print Network [OSTI]

    Kammen, Daniel M.

    Biofuels' Time of Transition Achieving high performance in a world of increasing fuel diversity #12;2 Table of contents #12;3 Introduction Up close: Highlights of Accenture's first biofuels study An evolving biofuels industry 1 Consumer influence Guest commentary on land-use change In focus: The food

  17. World Energy Projection System Plus Model Documentation: World Electricity Model

    Reports and Publications (EIA)

    2011-01-01

    This report documents the objectives, analytical approach and development of the World Energy Projection System Plus (WEPS ) World Electricity Model. It also catalogues and describes critical assumptions, computational methodology, parameter estimation techniques, and model source code.

  18. International co-operation on industrial energy efficiency

    E-Print Network [OSTI]

    Ahrendt, Wolfgang

    International co-operation on industrial energy efficiency IEA-IETS WWW.IEA-INDUSTRY.ORG Jan Sandvig Nielsen Weel & Sandvig IEA-IETS chair #12;Outline · International Energy Agency - IEA · IEA in IEA PI activities #12;IEA key activities · Energy statistics ­ Key world energy statistics ­ Country

  19. Cost, Conflict and Climate: U.S. Challenges in the World Oil Market

    E-Print Network [OSTI]

    Borenstein, Severin

    2008-01-01

    industry means that all oil demand pushes up the price ofearly 1980s drove down oil demand by 7% worldwide betweento suggest that the demand side of the world oil market or

  20. The Twilight of the Modern World The Four Stages of the Post-Oil Breakdown

    E-Print Network [OSTI]

    Keeling, Stephen L.

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.3 Security gifts, And snatch them straight away? William Shakespeare (Pericles, Prince of Tyre Act III Scene I) 1. Before the Industrial Revolution, the world survived on renewables, either locally-based water

  1. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk; Keith Wisecarver

    2004-09-26

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world is 2,937,439 barrels/calendar day. These cokers produce 154,607 tons of coke per day and delayed coking accounts for 88% of the world capacity. The delayed coking charge capacity in the United States is 1,787,860 b/cd. Despite its wide commercial use, only relatively few contractors and refiners are truly knowledgeable in delayed-coking design, so that this process carries with it a ''black art'' connotation. Until recently, the expected yield from cokers was determined by a simple laboratory test on the feedstock. As a result of Tulsa University's prior related research, a process model was developed that with additional work could be used to optimize existing delayed cokers over a wide range of potential feedstocks and operating conditions. The objectives of this research program are to: utilize the current micro, batch and pilot unit facilities at The University of Tulsa to enhance the understanding of the coking process; conduct additional micro and pilot unit tests with new and in-house resids and recycles to make current optimization models more robust; conduct focused kinetic experiments to enhance the furnace tube model and to enhance liquid production while minimizing sulfur in the products; conduct detailed foaming studies to optimize the process and minimize process upsets; quantify the parameters that affect coke morphology; and to utilize the knowledge gained from the experimental and modeling studies to enhance the computer programs developed in the previous JIP for optimization of the coking process. These refined computer models will then be tested against refinery data provided by the member companies. Novel concepts will also be explored for hydrogen sulfide removal of furnace gases as well as gas injection studies to reduce over-cracking.

  2. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk; Keith Wisecarver

    2003-09-26

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world is 2,937,439 barrels/calendar day. These cokers produce 154,607 tons of coke per day and delayed coking accounts for 88% of the world capacity. The delayed coking charge capacity in the United States is 1,787,860 b/cd. Despite its wide commercial use, only relatively few contractors and refiners are truly knowledgeable in delayed-coking design, so that this process carries with it a ''black art'' connotation. Until recently, the expected yield from cokers was determined by a simple laboratory test on the feedstock. As a result of Tulsa University's prior related research, a process model was developed that with additional work could be used to optimize existing delayed cokers over a wide range of potential feedstocks and operating conditions. The objectives of this research program are to: utilize the current micro, batch and pilot unit facilities at The University of Tulsa to enhance the understanding of the coking process; conduct additional micro and pilot unit tests with new and in-house resids and recycles to make current optimization models more robust; conduct focused kinetic experiments to enhance the furnace tube model and to enhance liquid production while minimizing sulfur in the products; conduct detailed foaming studies to optimize the process and minimize process upsets; quantify the parameters that affect coke morphology; and to utilize the knowledge gained from the experimental and modeling studies to enhance the computer programs developed in the previous JIP for optimization of the coking process. These refined computer models will then be tested against refinery data provided by the member companies. Novel concepts will also be explored for hydrogen sulfide removal of furnace gases as well as gas injection studies to reduce over-cracking.

  3. ,"Weekly Refiner Net Production"

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page| Open Energy Informationmonthly gasoline price to fall to $3.43U.S.longecReformulated GasolineSalesBlender NetRefiner

  4. Bandwidth Study U.S. Petroleum Refining | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based Fuels Researchof Energy and Forest ServicePower andPetroleum Refining

  5. Midcourse Refinements of Financing Strategies | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAand DOE SafetyofDepartment. "National Midcourse Refinements of

  6. Genealogy of major U.S. refiners - Energy Information Administration

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets See full Genealogy of Major U.S. Refiners

  7. Mechanical, Industrial & Manufacturing

    E-Print Network [OSTI]

    Balasubramanian, Ravi

    Mechanical, Industrial & Manufacturing Engineering (MIME) COLLEGE OF ENGINEERING FY2013 Oregon graduate degrees (MS, MEng, PhD) in mechanical engineering, industrial engineering, and materials science. We offer bachelor's degrees in mechanical, industrial, manufacturing, and energy systems engineering

  8. Chemicals Industry Vision

    SciTech Connect (OSTI)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  9. Industrial and Systems engineering

    E-Print Network [OSTI]

    Berdichevsky, Victor

    Industrial and Systems engineering COLLEGE of ENGINEERING DepartmentofIndustrialandSystemsEngineering EDGE Engineering Entrepreneur Certificate Program is a great addition to an industrial and systems to expert clinical recommendations. engineering.wayne.edu/isefaculty Industrial and systems engineering

  10. World Shale Resource Assessments

    Reports and Publications (EIA)

    2015-01-01

    Four countries: Chad, Kazakhstan, Oman and the United Arab Emirates (UAE) have been added to report “Technically Recoverable Shale Oil and Shale Gas Resources.” The report provides an estimate of shale resources in selected basins around the world. The new chapters cover shale basins from the Sub-Saharan Africa region, represented by Chad; the Caspian region, represented by Kazakhstan; and the Middle East region, represented by Oman and the United Arab Emirates (UAE) and are available as supplemental chapters to the 2013 report.

  11. WCI - World Consensus Initiative

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentat LENA|UpcomingVisit Us Download theVisualVolunteerWorld

  12. Virtual World Grammar (Extended Abstract)

    E-Print Network [OSTI]

    Rodríguez, Inmaculada

    Virtual World Grammar (Extended Abstract) Tomas Trescak Artificial Intelligence Research Institute by means of 3D virtual worlds facilitating then the interaction among participants, i.e humans and agents. In this paper we propose a system that can automatically gen- erate a 3D virtual world from formal

  13. Smart World 2004 Semantic Modeling

    E-Print Network [OSTI]

    Brock, David

    Smart World 2004 Semantic Modeling December 8th , 2004 Modern business and operations managers decisions, and translate new data capabilities into new waves of productivity? At Smart World 2004, hear how such as interoperable data modeling and interactive simulation. Register now for Smart World 2004 to envision a fully

  14. Business models and strategies in the video game industry : an analysis of Activision-Blizzard and Electronic Arts

    E-Print Network [OSTI]

    Lee, Ruri

    2013-01-01

    In recent years the video game industry has been of great importance in the business world beyond the role of a cultural medium. With its huge size and potential for more growth, the industry has attracted many newcomers. ...

  15. Electric Utility Industry Update

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers significant electric industry trends and industry priorities with federal customers.

  16. Uranium industry annual 1997

    SciTech Connect (OSTI)

    NONE

    1998-04-01

    This report provides statistical data on the U.S. uranium industry`s activities relating to uranium raw materials and uranium marketing.

  17. Industry Analysis February 2013

    E-Print Network [OSTI]

    Fletcher, Robin

    -Industries · Biodiesel ­ Biofuel ­ Alternate fuels ­ Green fuels ­ Renewable fuels/energy ­ Green energy ­ Green) · Business Source Complete - Company, market, industry news and articles · CBCA and Canadian Newsstand

  18. Chemical Industry Corrosion Management

    SciTech Connect (OSTI)

    2003-02-01

    Improved Corrosion Management Could Provide Significant Cost and Energy Savings for the Chemical Industry. In the chemical industry, corrosion is often responsible for significant shutdown and maintenance costs.

  19. WATER-TRAPPED WORLDS

    SciTech Connect (OSTI)

    Menou, Kristen [Department of Astronomy, Columbia University, 550 West 120th Street, New York, NY 10027 (United States)

    2013-09-01

    Although tidally locked habitable planets orbiting nearby M-dwarf stars are among the best astronomical targets to search for extrasolar life, they may also be deficient in volatiles and water. Climate models for this class of planets show atmospheric transport of water from the dayside to the nightside, where it is precipitated as snow and trapped as ice. Since ice only slowly flows back to the dayside upon accumulation, the resulting hydrological cycle can trap a large amount of water in the form of nightside ice. Using ice sheet dynamical and thermodynamical constraints, I illustrate how planets with less than about a quarter the Earth's oceans could trap most of their surface water on the nightside. This would leave their dayside, where habitable conditions are met, potentially dry. The amount and distribution of residual liquid water on the dayside depend on a variety of geophysical factors, including the efficiency of rock weathering at regulating atmospheric CO{sub 2} as dayside ocean basins dry up. Water-trapped worlds with dry daysides may offer similar advantages as land planets for habitability, by contrast with worlds where more abundant water freely flows around the globe.

  20. World Biofuels Study

    SciTech Connect (OSTI)

    Alfstad,T.

    2008-10-01

    This report forms part of a project entitled 'World Biofuels Study'. The objective is to study world biofuel markets and to examine the possible contribution that biofuel imports could make to help meet the Renewable Fuel Standard (RFS) of the Energy Independence and Security Act of 2007 (EISA). The study was sponsored by the Biomass Program of the Assistant Secretary for Energy Efficiency and Renewable Energy (EERE), U.S. Department of Energy. It is a collaborative effort among the Office of Policy and International Affairs (PI), Department of Energy and Oak Ridge National Laboratory (ORNL), National Renewable Energy Laboratory (NREL) and Brookhaven National Laboratory (BNL). The project consisted of three main components: (1) Assessment of the resource potential for biofuel feedstocks such as sugarcane, grains, soybean, palm oil and lignocellulosic crops and development of supply curves (ORNL). (2) Assessment of the cost and performance of biofuel production technologies (NREL). (3) Scenario-based analysis of world biofuel markets using the ETP global energy model with data developed in the first parts of the study (BNL). This report covers the modeling and analysis part of the project conducted by BNL in cooperation with PI. The Energy Technology Perspectives (ETP) energy system model was used as the analytical tool for this study. ETP is a 15 region global model designed using the MARKAL framework. MARKAL-based models are partial equilibrium models that incorporate a description of the physical energy system and provide a bottom-up approach to study the entire energy system. ETP was updated for this study with biomass resource data and biofuel production technology cost and performance data developed by ORNL and NREL under Tasks 1 and 2 of this project. Many countries around the world are embarking on ambitious biofuel policies through renewable fuel standards and economic incentives. As a result, the global biofuel demand is expected to grow very rapidly over the next two decades, provided policymakers stay the course with their policy goals. This project relied on a scenario-based analysis to study global biofuel markets. Scenarios were designed to evaluate the impact of different policy proposals and market conditions. World biofuel supply for selected scenarios is shown in Figure 1. The reference case total biofuel production increases from 12 billion gallons of ethanol equivalent in 2005 to 54 billion gallons in 2020 and 83 billion gallons in 2030. The scenarios analyzed show volumes ranging from 46 to 64 billion gallons in 2020, and from about 72 to about 100 billion gallons in 2030. The highest production worldwide occurs in the scenario with high feedstock availability combined with high oil prices and more rapid improvements in cellulosic biofuel conversion technologies. The lowest global production is found in the scenario with low feedstock availability, low oil prices and slower technology progress.

  1. Hydrogen milestone could help lower fossil fuel refining costs

    ScienceCinema (OSTI)

    Stephen Herring

    2010-01-08

    Hydrogen researchers at the U.S. Department of Energy's Idaho National Laboratory have reached another milestone on the road to reducing carbon emissions and protecting the nation against the effects of peaking world oil production. Stephen Herring, lab

  2. A Predictive Model of Fragmentation using Adaptive Mesh Refinement and a Hierarchical Material Model

    SciTech Connect (OSTI)

    Koniges, A E; Masters, N D; Fisher, A C; Anderson, R W; Eder, D C; Benson, D; Kaiser, T B; Gunney, B T; Wang, P; Maddox, B R; Hansen, J F; Kalantar, D H; Dixit, P; Jarmakani, H; Meyers, M A

    2009-03-03

    Fragmentation is a fundamental material process that naturally spans spatial scales from microscopic to macroscopic. We developed a mathematical framework using an innovative combination of hierarchical material modeling (HMM) and adaptive mesh refinement (AMR) to connect the continuum to microstructural regimes. This framework has been implemented in a new multi-physics, multi-scale, 3D simulation code, NIF ALE-AMR. New multi-material volume fraction and interface reconstruction algorithms were developed for this new code, which is leading the world effort in hydrodynamic simulations that combine AMR with ALE (Arbitrary Lagrangian-Eulerian) techniques. The interface reconstruction algorithm is also used to produce fragments following material failure. In general, the material strength and failure models have history vector components that must be advected along with other properties of the mesh during remap stage of the ALE hydrodynamics. The fragmentation models are validated against an electromagnetically driven expanding ring experiment and dedicated laser-based fragmentation experiments conducted at the Jupiter Laser Facility. As part of the exit plan, the NIF ALE-AMR code was applied to a number of fragmentation problems of interest to the National Ignition Facility (NIF). One example shows the added benefit of multi-material ALE-AMR that relaxes the requirement that material boundaries must be along mesh boundaries.

  3. Electricity Markets: Should the Rest of the World Adopt the UK Reforms?

    E-Print Network [OSTI]

    California at Berkeley. University of

    PWP-069 Electricity Markets: Should the Rest of the World Adopt the UK Reforms? Catherine D;1 Electricity Markets: Should the Rest of the World Adopt the UK Reforms?1 By Catherine D. Wolfram2 Britain was one of the first countries to liberalize its electricity industry when it restructured and privatized

  4. Why HKUST Engineering? World Rankings of HKUST School of Engineering 4

    E-Print Network [OSTI]

    #12;Why HKUST Engineering? World Rankings of HKUST School of Engineering 4 World-Class Professors 5 for Engineering Education Innovation (E²I) 8 Center for Global & Community Engagement (GCE) 9 Center for Industry Engagement & Internship (IEI) 9 Dynamic Programs New "Engineering PLUS" Education with Increased Flexibility

  5. The growing world LP-gas supply

    SciTech Connect (OSTI)

    Hoare, M.C.

    1988-11-01

    The possible range of future (LPG) export availabilities is huge, but actual production levels depend on factors, many of which are beyond our direct control - world demand for crude oil and gas, developments in technology, and the price of both energy in general and LPG specifically. Although these factors limit some of the potential developments, a substantial increase in LPG supply is certain, and this is likely to depress its price relative to other products. Over the last few years, a dramatic expansion has taken place in the industry. From 1980 to 1987, non-Communist world production of LPG increased by close to 35%, to a total of 115 million tonnes. If this is set against the general energy scene, LPG represented 3.7% of crude oil production by weight in 1980, rising to 5.4% in 1987. This growth reflects rise in consciousness around the world of the value of the product. LPG is no longer regarded as a byproduct, which is flared or disposed of at low value, but increasingly as a co-product, and much of the growth in production has been due to the installation of tailored recovery systems. LPG markets historically developed around sources of supply, constrained by the costs of transportation. The major exceptions, of course, were the Middle East, the large exporter, and Japan, the large importer.

  6. World nuclear outlook 1995

    SciTech Connect (OSTI)

    1995-09-29

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2015 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for two different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  7. World nuclear outlook 1994

    SciTech Connect (OSTI)

    NONE

    1994-12-01

    As part of the EIA program to provide energy information, this analysis report presents the current status and projections through 2010 of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. It also contains information and forecasts of developments in the uranium market. Long-term projections of US nuclear capacity, generation, and spent fuel discharges for three different scenarios through 2040 are developed for the Department of Energy`s Office of Civilian Radioactive Waste Management (OCRWM). In turn, the OCRWM provides partial funding for preparation of this report. The projections of uranium requirements are provided to the Organization for Economic Cooperation and Development (OECD) for preparation of the Nuclear Energy Agency/OECD report, Summary of Nuclear Power and Fuel Cycle Data in OECD Member Countries.

  8. Industrial Wireless Sensor Standards; A User Perspective

    SciTech Connect (OSTI)

    Sorge, John N [Southern Company Services, Inc.; Taft, Cyrus W. [Taft Engineering, Inc.; Manges, Wayne W [ORNL

    2011-01-01

    Future industrial use of wireless instrumentation will undoubtedly increase dramatically in the coming years. Deployment of such instrumentation in an industrial setting with its security and robustness criteria that are much more stringent than residential performance criteria hinges on user acceptance of verified performance as well as meeting cost requirements. Today, circa 2011, these industrial users are faced with many choices when specifying a wireless sensor network, including radio performance, battery life, interoperability concerns, and standards compliance. With industrial users standing on the precipice to order and deploy (literally) millions of wireless instruments, it is imperative that accurate information for applying the technology to real-world applications be available to the end-user.

  9. Influence of Alloy and Solidification Parameters on Grain Refinement in Aluminum Weld Metal due to Inoculation

    SciTech Connect (OSTI)

    Schempp, Philipp [BAM, Germany; Tang, Z. [BIAS, Germany; Cross, Carl E. [Los Alamos National Laboratory; Seefeld, T. [BIAS, Germany; Pittner, A. [BAM, Germany; Rethmeier, M. [BAM, Germany

    2012-06-28

    The goals are: (1) Establish how much Ti/B grain refiner is need to completely refine aluminum weld metal for different alloys and different welding conditions; (2) Characterize how alloy composition and solidification parameters affect weld metal grain refinement; and (3) Apply relevant theory to understand observed behavior. Conclusions are: (1) additions of Ti/B grain refiner to weld metal in Alloys 1050, 5083, and 6082 resulted in significant grain refinement; (2) grain refinement was more effective in GTAW than LBW, resulting in finer grains at lower Ti content - reason is limited time available for equiaxed grain growth in LBW (inability to occlude columnar grain growth); (3) welding travel speed did not markedly affect grain size within GTAW and LBW clusters; and (4) application of Hunt CET analysis showed experimental G to be on the order of the critical G{sub CET}; G{sub CET} was consistently higher for GTAW than for LBW.

  10. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering 1 Welcome MIE Industrial Advisory Board May 5th, 2011 #12;Mechanical & Industrial Engineering 2 IAB 2010-2011 · David K. Anderson ­ Alden Research Laboratory, Inc went on for three weeks Mechanical & Industrial Engineering 6 #12;Reza Shahbazian Yassar Mechanical

  11. INDUSTRIAL ENGINEERING GRADUATE PROGRAMS

    E-Print Network [OSTI]

    Gelfond, Michael

    INDUSTRIAL ENGINEERING GRADUATE PROGRAMS The Master of Science in Industrial Engineering (M Systems and Engineering (M.S.M.S.E.), the Doctor of Philosophy in Industrial Engineering, and the Doctor of Philosophy in Systems and Engineering Management programs prepare competent industrial engineers

  12. Industry Analysis October 2010

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    Industry and Company research ­ they build on each other #12;Industry Studies Standard & Poor's Net of competitors Standard & Poor's NetAdvantage - See 'Industry Surveys' under the "Quick Links" #12;Where Common technologies are there industry standards, platforms manufacturing processes, outsourcing? #12

  13. Impact of Environmental Compliance Costs on U.S. Refining Profitability 1995-2001

    Reports and Publications (EIA)

    2003-01-01

    This report assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations during the 1995 to 2001 period. This study is a follow-up to the October 1997 publication entitled The Impact of Environmental Compliance Costs on U.S. Refining Profitability, that focused on the financial impacts of U.S. refining pollution abatement investment requirements in the 1988 to1995 period.

  14. Oil, gas tanker industry responding to demand, contract changes

    SciTech Connect (OSTI)

    True, W.R.

    1998-03-02

    Steady if slower growth in demand for crude oil and natural gas, low levels of scrapping, and a moderate newbuilding pace bode well for the world`s petroleum and natural-gas shipping industries. At year-end 1997, several studies of worldwide demand patterns and shipping fleets expressed short and medium-term optimism for seaborne oil and gas trade and fleet growth. The paper discusses steady demand and shifting patterns, the aging fleet, the slowing products traffic, the world`s fleet, gas carriers, LPG demand, and LPG vessels.

  15. Securities Regulation in a Virtual World

    E-Print Network [OSTI]

    Thompson, Shannon L.

    2009-01-01

    Regulation in a Virtual World Shannon L. Thompson* I.A. What Is a Virtual World? . B.The Virtual World of Second Life .. 1. The

  16. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1998 Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) - Continued...

  17. Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 Table 10. U.S. Refiner Oxygenated Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) Year Month...

  18. Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1999 Table 6. U.S. Refiner Motor Gasoline Prices by Grade and Sales Type (Cents per Gallon Excluding Taxes) - Continued...

  19. Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales...

    U.S. Energy Information Administration (EIA) Indexed Site

    Energy Information AdministrationPetroleum Marketing Annual 1998 Table 7. U.S. Refiner Motor Gasoline Volumes by Grade and Sales Type (Million Gallons per Day) - Continued Year...

  20. Table 2. U.S. Refiner Prices of Petroleum Products to End Users

    U.S. Energy Information Administration (EIA) Indexed Site

    fuel. Note: Motor gasoline averages and totals prior to October 1993 include leaded gasoline. Sources: Energy Information Administration Form EIA-782A, "Refiners'Gas Plant...

  1. Counterexample-Guided Abstraction Refinement for POND Planning Jonas Thiem and Robert Mattmuller and Manuela Ortlieb

    E-Print Network [OSTI]

    Teschner, Matthias

    Counterexample-Guided Abstraction Refinement for POND Planning Jonas Thiem and Robert Mattm to define abstractions (guar- anteeing over-approximations). A straightforward way for POND planning

  2. Refining and Extending the Business Model with Information Technology: Dell Computer Corporation

    E-Print Network [OSTI]

    Kraemer, Kenneth L; Dedrick, Jason; Yamashiro, Sandra

    1999-01-01

    of Dell’s Direct Business Model Fuels Fifteenth ConsecutiveAND EXTENDING THE REFINING AND EXTENDING THE BUSINESS MODELBUSINESS MODEL CENTER FOR RESEARCH ON INFORMATION TECHNOLOGY

  3. Table A3. Refiner/Reseller Prices of Distillate and Residual...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 441 Table A3. RefinerReseller Prices of Distillate and Residual Fuel Oils, by PAD District, 1983-Present (Cents per Gallon...

  4. Table A1. Refiner/Reseller Motor Gasoline Prices by Grade, PAD...

    U.S. Energy Information Administration (EIA) Indexed Site

    Petroleum Marketing Annual 1999 401 Table A1. RefinerReseller Motor Gasoline Prices by Grade, PAD District and State, 1984-Present (Cents per Gallon Excluding Taxes) -...

  5. Table A2. Refiner/Reseller Prices of Aviation Fuels, Propane...

    U.S. Energy Information Administration (EIA) Indexed Site

    AdministrationPetroleum Marketing Annual 1999 421 Table A2. RefinerReseller Prices of Aviation Fuels, Propane, and Kerosene, by PAD District, 1983-Present (Cents per...

  6. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    Gasoline and Diesel Fuel Update (EIA)

    Petroleum Marketing Annual 1998 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

  7. Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil...

    U.S. Energy Information Administration (EIA) Indexed Site

    Petroleum Marketing Annual 1999 295 Table 46. Refiner No. 2 Distillate, Diesel Fuel, and Fuel Oil Volumes by PAD District and State (Thousand Gallons per Day) - Continued...

  8. Refining and classifying finite-time Lyapunov exponent ridges

    E-Print Network [OSTI]

    Allshouse, Michael R

    2015-01-01

    While more rigorous and sophisticated methods for identifying Lagrangian based coherent structures exist, the finite-time Lyapunov exponent (FTLE) field remains a straightforward and popular method for gaining some insight into transport by complex, time-dependent two-dimensional flows. In light of its enduring appeal, and in support of good practice, we begin by investigating the effects of discretization and noise on two numerical approaches for calculating the FTLE field. A practical method to extract and refine FTLE ridges in two-dimensional flows, which builds on previous methods, is then presented. Seeking to better ascertain the role of an FTLE ridge in flow transport, we adapt an existing classification scheme and provide a thorough treatment of the challenges of classifying the types of deformation represented by an FTLE ridge. As a practical demonstration, the methods are applied to an ocean surface velocity field data set generated by a numerical model.

  9. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, M.R.

    1994-11-22

    A furnace for smelting iron ore and/or refining molten iron is equipped with an overhead pneumatic lance, through which a center stream of particulate coal is ejected at high velocity into a slag layer. An annular stream of nitrogen or argon enshrouds the coal stream. Oxygen is simultaneously ejected in an annular stream encircling the inert gas stream. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus to react with carbon monoxide gas rising from slag layer, thereby adding still more heat to the furnace. 7 figs.

  10. Fuel and oxygen addition for metal smelting or refining process

    DOE Patents [OSTI]

    Schlichting, Mark R. (Chesterton, IN)

    1994-01-01

    A furnace 10 for smelting iron ore and/or refining molten iron 20 is equipped with an overhead pneumatic lance 40, through which a center stream of particulate coal 53 is ejected at high velocity into a slag layer 30. An annular stream of nitrogen or argon 51 enshrouds the coal stream. Oxygen 52 is simultaneously ejected in an annular stream encircling the inert gas stream 51. The interposition of the inert gas stream between the coal and oxygen streams prevents the volatile matter in the coal from combusting before it reaches the slag layer. Heat of combustion is thus more efficiently delivered to the slag, where it is needed to sustain the desired reactions occurring there. A second stream of lower velocity oxygen can be delivered through an outermost annulus 84 to react with carbon monoxide gas rising from slag layer 30, thereby adding still more heat to the furnace.

  11. ENZO: AN ADAPTIVE MESH REFINEMENT CODE FOR ASTROPHYSICS

    SciTech Connect (OSTI)

    Bryan, Greg L.; Turk, Matthew J. [Columbia University, Department of Astronomy, New York, NY 10025 (United States); Norman, Michael L.; Bordner, James; Xu, Hao; Kritsuk, Alexei G. [CASS, University of California, San Diego, 9500 Gilman Drive La Jolla, CA 92093-0424 (United States); O'Shea, Brian W.; Smith, Britton [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Abel, Tom; Wang, Peng; Skillman, Samuel W. [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, Menlo Park, CA 94025 (United States); Wise, John H. [Center for Relativistic Astrophysics, School of Physics, Georgia Institute of Technology, 837 State Street, Atlanta, GA (United States); Reynolds, Daniel R. [Department of Mathematics, Southern Methodist University, Box 750156, Dallas, TX 75205-0156 (United States); Collins, David C. [Department of Physics, Florida State University, Tallahassee, FL 32306 (United States); Harkness, Robert P. [NICS, Oak Ridge National Laboratory, 1 Bethel Valley Rd, Oak Ridge, TN 37831 (United States); Kim, Ji-hoon [Department of Astronomy and Astrophysics, University of California, 1156 High Street, Santa Cruz, CA 95064 (United States); Kuhlen, Michael [Theoretical Astrophysics Center, University of California Berkeley, Hearst Field Annex, Berkeley, CA 94720 (United States); Goldbaum, Nathan [Institute for Astronomy, University of Edinburgh, Edinburgh EH9 3HJ (United Kingdom); Hummels, Cameron [Department of Astronomy/Steward Observatory, University of Arizona, 933 N. Cherry Ave., Tucson, AZ 85721 (United States); Tasker, Elizabeth [Physics Department, Faculty of Science, Hokkaido University, Kita-10 Nishi 8, Kita-ku, Sapporo 060-0810 (Japan); Collaboration: Enzo Collaboration; and others

    2014-04-01

    This paper describes the open-source code Enzo, which uses block-structured adaptive mesh refinement to provide high spatial and temporal resolution for modeling astrophysical fluid flows. The code is Cartesian, can be run in one, two, and three dimensions, and supports a wide variety of physics including hydrodynamics, ideal and non-ideal magnetohydrodynamics, N-body dynamics (and, more broadly, self-gravity of fluids and particles), primordial gas chemistry, optically thin radiative cooling of primordial and metal-enriched plasmas (as well as some optically-thick cooling models), radiation transport, cosmological expansion, and models for star formation and feedback in a cosmological context. In addition to explaining the algorithms implemented, we present solutions for a wide range of test problems, demonstrate the code's parallel performance, and discuss the Enzo collaboration's code development methodology.

  12. 2008 world direct reduction statistics

    SciTech Connect (OSTI)

    NONE

    2009-07-01

    This supplement discusses total direct reduced iron (DRI) production for 2007 and 2008 by process. Total 2008 production by MIDREX(reg sign) direct reduction process plants was over 39.8 million tons. The total of all coal-based processes was 17.6 million tons. Statistics for world DRI production are also given by region for 2007 and 2008 and by year (1970-2009). Capacity utilization for 2008 by process is given. World DRI production by region and by process is given for 1998-2008 and world DRI shipments are given from the 1970s to 2008. A list of world direct reduction plants is included.

  13. Small-World Propensity in Weighted, Real-World Networks

    E-Print Network [OSTI]

    Muldoon, Sarah Feldt; Bassett, Danielle S

    2015-01-01

    Quantitative descriptions of network structure in big data can provide fundamental insights into the function of interconnected complex systems. Small-world structure, commonly diagnosed by high local clustering yet short average path length between any two nodes, directly enables information flow in coupled systems, a key function that can differ across conditions or between groups. However, current techniques to quantify small-world structure are dependent on nuisance variables such as density and agnostic to critical variables such as the strengths of connections between nodes, thereby hampering accurate and comparable assessments of small-world structure in different networks. Here, we address both limitations with a novel metric called the Small-World Propensity (SWP). In its binary instantiation, the SWP provides an unbiased assessment of small-world structure in networks of varying densities. We extend this concept to the case of weighted networks by developing (i) a standardized procedure for generati...

  14. Small-world models Winfried Just

    E-Print Network [OSTI]

    Just, Winfried

    Small-world models Winfried Just Hannah Callender May 27, 2015 Small-world networks are classes of networks that have both the small-world property and exhibit strong clustering. Two constructions worlds 1.1 The small-world property and small-world networks In our module Exploring distances with IONTW

  15. Abstraction and CounterexampleGuided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12; 1Abstraction and Counterexample­Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  16. Perspectives on Sustainable Materials, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating)

    E-Print Network [OSTI]

    Wolberg, George

    Perspectives on Sustainable Materials, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating) 1 SUS 7600A: Perspectives on Sustainable Materials Instructor: Susan Kaplan, LEED AP, Instructor Susan Kaplan Fall 2014 Syllabus (subject to refining/updating) 2 Primary Assignments: Basic

  17. Orientation Refinement of Virus Structures with Unknown Symmetry Yongchang Ji, Dan C. Marinescu

    E-Print Network [OSTI]

    Baker, Timothy S.

    Orientation Refinement of Virus Structures with Unknown Symmetry Yongchang Ji, Dan C. Marinescu, in particular the structure determina- tion of viruses and other large macromolecular complexes leads to data determina- tion of viruses, the orientation refinement. 1. Introduction and Motivation Viruses are large

  18. To appear in EPTCS. A CSP account of Event-B refinement

    E-Print Network [OSTI]

    Doran, Simon J.

    To appear in EPTCS. A CSP account of Event-B refinement Steve Schneider Department of Computing a CSP account of Event-B refinement, with a treatment for the first time of splitting events and of anticipated events. To this end, we define a CSP seman- tics for Event-B and show how the different forms

  19. FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,

    E-Print Network [OSTI]

    Oxford, University of

    FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its internal representation of CSP processes

  20. FDR3 --A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong,

    E-Print Network [OSTI]

    Oxford, University of

    FDR3 -- A Modern Refinement Checker for CSP Thomas Gibson-Robinson, Philip Armstrong, Alexandre.roscoe}@cs.ox.ac.uk Abstract. FDR3 is a complete rewrite of the CSP refinement checker FDR2, incorporating a significant number describe the new algorithm that FDR3 uses to construct its in- ternal representation of CSP processes

  1. Rapidly-Exploring Roadmaps: Weighing Exploration vs. Refinement in Optimal Motion Planning

    E-Print Network [OSTI]

    Patil, Sachin

    Rapidly-Exploring Roadmaps: Weighing Exploration vs. Refinement in Optimal Motion Planning Ron of already explored regions to find better paths. We present the rapidly- exploring roadmap (RRM), a new to explore further or to refine the explored space by adding edges to the current roadmap to find higher

  2. WORLD PRODUCTION AND TRADE IN

    E-Print Network [OSTI]

    WORLD PRODUCTION AND TRADE IN FISH MEAL AND OIL UNITED STATES DEPARTMENT OF THE INTERIOR · FISH ON OF FISH MEAL AND OIL , ESPECIALLY DUR ING 1953 TO 1959, THE PRI NC IPAL MARKET S FOR THE PRODUCTS- DICATE WHAT IS INCLUDED BESIDES FISHMEAL AND FISH BODY OIL. #12;WORLD PRODUCTION AND TRADE IN FISH MEAL

  3. WORLD CONFERENCE AND GENEALOGICAL SEMINAR

    E-Print Network [OSTI]

    Olsen Jr., Dan R.

    WORLD CONFERENCE ON RECORDS AND GENEALOGICAL SEMINAR Salt Lake City, Utah, U.S.A. 5-8 August 1969 Research In Yugoslavia By Joze Zontar COPYRIGHT© 1969 THE GENEALOGICAL SOCIETY OF THE CHURCH OF JESUS CHRIST OF LATTER·DAY SAINTS, INC. AREA 0 -13 WORLD CONFERENCE ON RECORDS AND GENEALOGICAL SEMINAR Salt

  4. US Energy Industry Financial Developments, 1993 fourth quarter, April 1994

    SciTech Connect (OSTI)

    Not Available

    1994-04-14

    This report traces key financial trends in the US energy industry for the fourth quarter of 1993. Financial data (only available for publicly-traded US companies) are included in two broad groups -- fossil fuel production and rate-regulated electric utilities. All financial data are taken from public sources such as energy industry corporate reports and press releases, energy trade publications, and The Wall Street Journal`s Earnings Digest; return on equity is calculated from data available from Standard and Poor`s Compustat data service. Since several major petroleum companies disclose their income by lines of business and geographic area, these data are also presented in this report. Although the disaggregated income concept varies by company and is not strictly comparable to corporate income, relative movements in income by lines of business and geographic area are summarized as useful indicators of short-term changes in the underlying profitability of these operations. Based on information provided in 1993 fourth quarter financial disclosures, the net income for 82 petroleum companies -- including 18 majors -- was unchanged between the fourth quarter of 1992 and the fourth quarter of 1993. An 18-percent decline in crude oil prices resulted in a deterioration of the performance of upstream (oil and gas production) petroleum companies during the final quarter of 1993. However, prices for refined products fell much less than the price of crude oil, resulting in higher refined product margins and downstream (refining, marketing and transport) petroleum earnings. An increase in refined product demand also contributed to the rise in downstream income.

  5. The Industrial Electrification Program 

    E-Print Network [OSTI]

    Harry, I. L.

    1982-01-01

    EPRI's role as the research organization of the electric power industry, in coordination with potential user industries, is to 1) define the viability of candidate electrification technologies by monitoring the state-of-the-art and continuously...

  6. INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY

    E-Print Network [OSTI]

    Pohl, Karsten

    INDUSTRIAL ENGINEER APPRENTICE OPPORTUNITY SUMMER 2013 Industrial Engineering COOP Student needed-Fri, for summer 2013. Student must be enrolled in BS Engineering program. (Preferably completed 2-3 yrs

  7. Geothermal Industry Partnership Opportunities

    Broader source: Energy.gov [DOE]

    Here you'll find links to information about partnership opportunities and programs for the geothermal industry.

  8. Industry Analysis January 2012

    E-Print Network [OSTI]

    Abolmaesumi, Purang

    ;8 Conference Board E-Library ­ Canadian industries, economic trends & forecasts ­ national, provincial1 CHEE 906 Industry Analysis January 2012 Constance Adamson, Stauffer Library adamsonc for both Industry and Company research ­ they build on each other #12;3 Where are they? · Library website

  9. Industrial Optimization Compact Course

    E-Print Network [OSTI]

    Kirches, Christian

    Industrial Optimization Compact Course and Challenge Workshop Optimization plays a crucial role in designing and conducting industrial processes. The potential gains range from saving valuable resources over makers from industry and academia to initiate new projects and to foster new structured collaborations

  10. Mechanical & Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    Mechanical & Industrial Engineering Mario A. Rotea Professor and Department Head #12;2Mechanical & Industrial Engineering Outline · Undergraduate Degree Programs · Graduate Degree Programs · The Faculty · The Research · Summary #12;3Mechanical & Industrial Engineering Undergraduate Programs ­ BSME & BSIE 0 20 40 60

  11. Photovoltaics industry profile

    SciTech Connect (OSTI)

    1980-10-01

    A description of the status of the US photovoltaics industry is given. Principal end-user industries are identified, domestic and foreign market trends are discussed, and industry-organized and US government-organized trade promotion events are listed. Trade associations and trade journals are listed, and a photovoltaic product manufacturers list is included. (WHK)

  12. World trends: Improving fortunes restore upstream health

    SciTech Connect (OSTI)

    1996-08-01

    After a decade of recovery from the oil price collapse of 1986, the global upstream industry appears headed for a period of renewed strength and growth. Underpinning the prosperity is steady unrelenting growth in crude demand. Stronger global crude demand and heavy natural gas usage in the US are driving higher prices. Operators are reacting to better prices with larger drilling programs. Also boosting drilling levels are crude production expansion projects that many countries have underway in response to perceived future demand. Not surprisingly, World Oil`s outlook calls for global drilling to rise 4.5% to 60,273 wells, a second straight annual increase. Better US activity is helping, but so are stronger-than-expected numbers in Canada. Meanwhile, World Oil`s 51st annual survey of governments and operators indicates that global oil production rose 1.4% last year, to 62,774 million bpd. That was not enough, however, to keep up with demand. The paper discusses financial performance, business practices, other factors, and operating outlook. A table lists the 1996 forecasts, estimated wells drilled in 1995, and total wells and footage drilled in 1994 by country. A second table lists global crude and condensate production and wells actually producing in 1995 versus 1994.

  13. Making Industry Part of the Climate Solution

    SciTech Connect (OSTI)

    Lapsa, Melissa Voss; Brown, Dr. Marilyn Ann; Jackson, Roderick K; Cox, Matthew; Cortes, Rodrigo; Deitchman, Benjamin H

    2011-06-01

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  14. Cosmos++: Relativistic Magnetohydrodynamics on Unstructured Grids with Local Adaptive Refinement

    E-Print Network [OSTI]

    Peter Anninos; P. Chris Fragile; Jay D. Salmonson

    2005-09-09

    A new code and methodology are introduced for solving the general relativistic magnetohydrodynamic (GRMHD) equations in fixed background spacetimes using time-explicit, finite-volume discretization. The code has options for solving the GRMHD equations using traditional artificial-viscosity (AV) or non-oscillatory central difference (NOCD) methods, or a new extended AV (eAV) scheme using artificial-viscosity together with a dual energy-flux-conserving formulation. The dual energy approach allows for accurate modeling of highly relativistic flows at boost factors well beyond what has been achieved to date by standard artificial viscosity methods. It provides the benefit of Godunov methods in capturing high Lorentz boosted flows but without complicated Riemann solvers, and the advantages of traditional artificial viscosity methods in their speed and flexibility. Additionally, the GRMHD equations are solved on an unstructured grid that supports local adaptive mesh refinement using a fully threaded oct-tree (in three dimensions) network to traverse the grid hierarchy across levels and immediate neighbors. A number of tests are presented to demonstrate robustness of the numerical algorithms and adaptive mesh framework over a wide spectrum of problems, boosts, and astrophysical applications, including relativistic shock tubes, shock collisions, magnetosonic shocks, Alfven wave propagation, blast waves, magnetized Bondi flow, and the magneto-rotational instability in Kerr black hole spacetimes.

  15. Refining a relativistic, hydrodynamic solver: Admitting ultra-relativistic flows

    E-Print Network [OSTI]

    J. P. Bernstein; P. A. Hughes

    2009-07-23

    We have undertaken the simulation of hydrodynamic flows with bulk Lorentz factors in the range 10^2--10^6. We discuss the application of an existing relativistic, hydrodynamic primitive-variable recovery algorithm to a study of pulsar winds, and, in particular, the refinement made to admit such ultra-relativistic flows. We show that an iterative quartic root finder breaks down for Lorentz factors above 10^2 and employ an analytic root finder as a solution. We find that the former, which is known to be robust for Lorentz factors up to at least 50, offers a 24% speed advantage. We demonstrate the existence of a simple diagnostic allowing for a hybrid primitives recovery algorithm that includes an automatic, real-time toggle between the iterative and analytical methods. We further determine the accuracy of the iterative and hybrid algorithms for a comprehensive selection of input parameters and demonstrate the latter's capability to elucidate the internal structure of ultra-relativistic plasmas. In particular, we discuss simulations showing that the interaction of a light, ultra-relativistic pulsar wind with a slow, dense ambient medium can give rise to asymmetry reminiscent of the Guitar nebula leading to the formation of a relativistic backflow harboring a series of internal shockwaves. The shockwaves provide thermalized energy that is available for the continued inflation of the PWN bubble. In turn, the bubble enhances the asymmetry, thereby providing positive feedback to the backflow.

  16. INDUSTRIAL RELATIONS 1. Agreements with Industry

    E-Print Network [OSTI]

    of the New Hampshire Industrial Research Center (NHIRC), a cooperative project of the New Hampshire Department of Resources and Economic Development (DRED), the University of New Hampshire (UNH), and Dartmouth

  17. Industrial policy and the Indian electronics industry

    E-Print Network [OSTI]

    Love, Robert (Robert Eric)

    2008-01-01

    Recently, production within India's Electronics sector amounted to a low $12 billion when compared to the global output of $1400 billion. The slow growth in the local industry is often judged to be the result of late ...

  18. Industrial Dojo Program Fosters Industrial Internet Development...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dojo,' Contributes to Open Source to Foster Continued Development of the Industrial Internet Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new...

  19. The world in the network: the Interop trade show, Carl Malamud's Internet 1996 Exposition, and the politics of internet commercialization

    E-Print Network [OSTI]

    Kaman, Colleen E

    2010-01-01

    In the early 1990s, the Internet emerged as a commercially viable global communications medium. This study considers the role that representatives of the military-industrial research world played in the physical expansion ...

  20. Industry`s turnaround looks real

    SciTech Connect (OSTI)

    NONE

    1997-08-01

    The paper discusses the industry outlook for North American gas and oil industries. In a robust Canada, land sales are setting records, drilling is up, and output is rising beyond last year`s 21% growth. A perception among US operators that wellhead prices will remain stable is translating to increased spending. The USA, Canada, Mexico, Cuba are evaluated separately, with brief evaluations of Greenland, Guatemala, Belize, and Costa Rico. Data are presented on drilling activities.

  1. Possibility in the Actual World

    E-Print Network [OSTI]

    Webb, Douglas J.

    Possibility in the Actual World Douglas J. Webb I. Introduction If one affirms an unrestricted law of bivalence, then there is a set of present truths that captures everything about the future. To begin, let me explain and briefly criticize... no other way the world (this world) can go. What is true cannot become false; hence what is true is logically fixed, or necessarily true. On the other hand, we suspect that in the reasoning just mentioned we are somehow confusing truth with necessity...

  2. The Development of Methanol Industry and Methanol Fuel in China

    SciTech Connect (OSTI)

    Li, W.Y.; Li, Z.; Xie, K.C.

    2009-07-01

    In 2007, China firmly established itself as the driver of the global methanol industry. The country became the world's largest methanol producer and consumer. The development of the methanol industry and methanol fuel in China is reviewed in this article. China is rich in coal but is short on oil and natural gas; unfortunately, transportation development will need more and more oil to provide the fuel. Methanol is becoming a dominant alternative fuel. China is showing the rest of the world how cleaner transportation fuels can be made from coal.

  3. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take of industries including consulting, technology development, software, supply chain manufacturing, engineering

  4. The cartography of capitalism: cartographic evidence for the emergence of the capitalist world-system in early modern europe 

    E-Print Network [OSTI]

    Woodfin, Thomas McCall

    2008-10-10

    , but only in so far as cartography seems embedded in some of the long-term structural changes of the transition from feudalism to capitalism. The world economy and its new geographical division of labour was produced with the aid of geographical.... Advancements in mathematics led to increasingly scientific land surveying techniques. David Harvey asserts that The history of cartography in the transition from feudalism to capitalism has, like the history of time-keeping, been very much about refinement...

  5. The world price of coal

    E-Print Network [OSTI]

    Ellerman, A. Denny

    1994-01-01

    A significant increase in the seaborne trade for coal over the past twenty years has unified formerly separate coal markets into a world market in which prices move in tandem. Due to its large domestic market, the United ...

  6. Entrepreneurial ecosystems around the world

    E-Print Network [OSTI]

    Kumar, Anand R

    2013-01-01

    Entrepreneurship is a vehicle of growth and job creation. America has understood it and benefitted most from following this philosophy. Governments around the world need to build and grow their entrepreneurial ecosystems ...

  7. Following the world's first nuclear...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory) 35 National Security Science December 2014 From 1943 until the end of World War II (WWII) in 1945, Los Alamos was a secret city-officially it did not exist. Even...

  8. What else did the price crash do. World oil's new-think

    SciTech Connect (OSTI)

    Not Available

    1986-06-18

    The pricing of crude oil in relation to its refined product value should probably be viewed not as the cause of the international price crash touched off in late 1985, but as the consequence. Negotiating tables appear more cozy, with smaller distances between what buyers and sellers recognize as market-oriented prices. To an important degree, OPEC now officially prices by the netback system, and many other producers will likely follow soon. In California, an OPEC light crude and two domestics reveal new-think. This issue also includes the following: (1) ED refining netback data for the US Gulf and West Coasts, Rotterdam, and Singapore for June 1986; (2) ED fuel price/tax series for countries of the Eastern Hemisphere for May 1986 (unless otherwise indicated); and (3) principal industrial fuel prices for countries of the Eastern Hemisphere for March 1986.

  9. Internationalization within networks: exploring the relationship between inward and outward FDI in China’s auto components industry

    E-Print Network [OSTI]

    Hertenstein, Peter; Sutherland, Dylan; Anderson, John

    2015-01-01

    technologies. Most importantly, they have emerged during a period of increased outsourcing via global production networks (Buckley & Ghauri, 2004; Nolan, 2012). The world’s largest AMNCs have restructured their manufacturing supply chains, where networked... component supply firms to explore the role of business networks and how inward FDI may shape their outward FDI. Industry context The auto industry gave rise to the concepts of Fordism and lean production and is an influential trend setting industry...

  10. J4.3 LARGE-EDDY SIMULATION ACROSS A GRID REFINEMENT INTERFACE USING EXPLICIT FILTERING AND RECONSTRUCTION

    E-Print Network [OSTI]

    Chow, Fotini Katopodes

    reflect off grid refinement interfaces, specifically on the outflow boundary from a fine to a coarse grid reflection off grid refinement interfaces by forcing the filter-resolved scale on a fine grid to equalJ4.3 LARGE-EDDY SIMULATION ACROSS A GRID REFINEMENT INTERFACE USING EXPLICIT FILTERING

  11. Influence of Aluminum Content on Grain Refinement and Strength of AZ31 Magnesium GTA Weld Metal

    SciTech Connect (OSTI)

    Babu, N. Kishore [Singapore Institute of Manufacturing Technology; Cross, Carl E. [Los Alamos National Laboratory

    2012-06-28

    The goal is to characterize the effect of Al content on AZ31 weld metal, the grain size and strength, and examine role of Al on grain refinement. The approach is to systematically vary the aluminum content of AZ31 weld metal, Measure average grain size in weld metal, and Measure cross-weld tensile properties and hardness. Conclusions are that: (1) increased Al content in AZ31 weld metal results in grain refinement Reason: higher undercooling during solidification; (2) weld metal grain refinement resulted in increased strength & hardness Reason: grain boundary strengthening; and (3) weld metal strength can be raised to wrought base metal levels.

  12. RAM: a Relativistic Adaptive Mesh Refinement Hydrodynamics Code

    SciTech Connect (OSTI)

    Zhang, Wei-Qun; MacFadyen, Andrew I.; /Princeton, Inst. Advanced Study

    2005-06-06

    The authors have developed a new computer code, RAM, to solve the conservative equations of special relativistic hydrodynamics (SRHD) using adaptive mesh refinement (AMR) on parallel computers. They have implemented a characteristic-wise, finite difference, weighted essentially non-oscillatory (WENO) scheme using the full characteristic decomposition of the SRHD equations to achieve fifth-order accuracy in space. For time integration they use the method of lines with a third-order total variation diminishing (TVD) Runge-Kutta scheme. They have also implemented fourth and fifth order Runge-Kutta time integration schemes for comparison. The implementation of AMR and parallelization is based on the FLASH code. RAM is modular and includes the capability to easily swap hydrodynamics solvers, reconstruction methods and physics modules. In addition to WENO they have implemented a finite volume module with the piecewise parabolic method (PPM) for reconstruction and the modified Marquina approximate Riemann solver to work with TVD Runge-Kutta time integration. They examine the difficulty of accurately simulating shear flows in numerical relativistic hydrodynamics codes. They show that under-resolved simulations of simple test problems with transverse velocity components produce incorrect results and demonstrate the ability of RAM to correctly solve these problems. RAM has been tested in one, two and three dimensions and in Cartesian, cylindrical and spherical coordinates. they have demonstrated fifth-order accuracy for WENO in one and two dimensions and performed detailed comparison with other schemes for which they show significantly lower convergence rates. Extensive testing is presented demonstrating the ability of RAM to address challenging open questions in relativistic astrophysics.

  13. Hydrogen milestone could help lower fossil fuel refining costs

    ScienceCinema (OSTI)

    McGraw, Jennifer

    2013-05-28

    Hydrogen researchers at the U.S. Department of Energy's Idaho National Laboratory have reached another milestone on the road to reducing carbon emissions and protecting the nation against the effects of peaking world oil production. Stephen Herring, laboratory fellow and technical director of the INL High Temperature Electrolysis team, today announced that the latest fuel cell modification has set a new mark in endurance. The group's Integrated Laboratory Scale experiment has now operated continuously for 2,583 hours at higher efficiencies than previously attained. Learn more about INL research at http://www.facebook.com/idahonationallaboratory.

  14. Midwest Industrial Energy Efficiency Handbook

    SciTech Connect (OSTI)

    2010-06-25

    This Industrial Technologies Program handbook connects industry with the various energy efficiency resources available in the midwest.

  15. Technology partnerships: Enhancing the competitiveness, efficiency, and environmental quality of American industry

    SciTech Connect (OSTI)

    NONE

    1995-04-01

    An overview of the Department of Energy`s Office of Industrial Technologies and its private sector partnerships is presented. Commercial success stories and real-world benefits of the technology partnerships are discussed.

  16. Successful public sector enforcement of environmental standards in the Toritama Jeans industry in Pernambuco, Brazil

    E-Print Network [OSTI]

    Lazarte, Maria Ella J

    2005-01-01

    Non-observance of environmental standards among small firms in traditional industries such as garment, footwear, furniture and tanneries have caused major environmental degradation in many places throughout the world. ...

  17. The World Bank Group Energy Strategy

    E-Print Network [OSTI]

    Kammen, Daniel M.

    The World Bank Group Energy Strategy Approach Paper Sustainable Development Network October 2009...............................................................................................................................................iii World Bank Group Energy Strategy Approach Paper...............................................................................................................3 World Bank Group Energy Sector Strategy and Performance in Recent Years

  18. Blasting Our World (Joy to The World) Pedrolina "Paige" Delaperrucca and The Greater Westerly Raging Grannies

    E-Print Network [OSTI]

    Nightingale, Peter

    Blasting Our World (Joy to The World) Pedrolina "Paige" Delaperrucca and The Greater Westerly of the our They Rem- We Blast- Nu- G 2 truth di- leave they king- do dom D world waste war bomb, world

  19. CASL - Industry Council

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Member round Robin Discussion and New Action items Organization Senior Leadership Technical Leadership Outreach Board of Directors Industry Council Science Council One-Roof Culture...

  20. CASL - Industry Council Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2014 March 17, 2015 Upcoming Meeting Information Organization Senior Leadership Technical Leadership Outreach Board of Directors Industry Council Science Council One-Roof Culture...

  1. Presentations for Industry

    Broader source: Energy.gov [DOE]

    Learn energy-saving strategies from leading manufacturing companies and energy experts. The presentations are organized below by topic area. In addition, industrial energy managers, utilities, and...

  2. About Industrial Distributed Energy

    Broader source: Energy.gov [DOE]

    The Advanced Manufacturing Office's (AMO's) Industrial Distributed Energy activities build on the success of predecessor DOE programs on distributed energy and combined heat and power (CHP) while...

  3. Industrial Sector Energy Demand: Revisions for Non-Energy-Intensive Manufacturing (released in AEO2007)

    Reports and Publications (EIA)

    2007-01-01

    For the industrial sector, the Energy Information Administration's (EIA) analysis and projection efforts generally have focused on the energy-intensive industriesfood, bulk chemicals, refining, glass, cement, steel, and aluminumwhere energy cost averages 4.8% of annual operating cost. Detailed process flows and energy intensity indicators have been developed for narrowly defined industry groups in the energy-intensive manufacturing sector. The non-energy-intensive manufacturing industries, where energy cost averages 1.9% of annual operating cost, previously have received somewhat less attention, however. In Annual Energy Outlook 2006 (AEO), energy demand projections were provided for two broadly aggregated industry groups in the non-energy-intensive manufacturing sector: metal-based durables and other non-energy-intensive. In the AEO2006 projections, the two groups accounted for more than 50% of the projected increase in industrial natural gas consumption from 2004 to 2030.

  4. Process for solvent refining of coal using a denitrogenated and dephenolated solvent

    DOE Patents [OSTI]

    Garg, Diwakar (Macungie, PA); Givens, Edwin N. (Bethlehem, PA); Schweighardt, Frank K. (Allentown, PA)

    1984-01-01

    A process is disclosed for the solvent refining of non-anthracitic coal at elevated temperatures and pressure in a hydrogen atmosphere using a hydrocarbon solvent which before being recycled in the solvent refining process is subjected to chemical treatment to extract substantially all nitrogenous and phenolic constituents from the solvent so as to improve the conversion of coal and the production of oil in the solvent refining process. The solvent refining process can be either thermal or catalytic. The extraction of nitrogenous compounds can be performed by acid contact such as hydrogen chloride or fluoride treatment, while phenolic extraction can be performed by caustic contact or contact with a mixture of silica and alumina.

  5. Grain refinement and texture development of cast bi90sb10 alloy via severe plastic deformation 

    E-Print Network [OSTI]

    Im, Jae-taek

    2009-05-15

    The purpose of this work was to study learn about grain refinement mechanisms and texture development in cast n-type Bi90Sb10 alloy caused by severe plastic deformation. The practical objective is to produce a fine grained ...

  6. Impact of Environmental Compliance Costs on U.S. Refining Profitability

    Reports and Publications (EIA)

    1997-01-01

    Assesses the effects of pollution abatement requirements on the financial performance of U.S. petroleum refining and marketing operations. The analysis draws heavily on financial and operating data from the Energy Information Administration's Financial Reporting System (FRS).

  7. Classical descriptive set theory as a refinement of effective descriptive set theory

    E-Print Network [OSTI]

    Moschovakis, Yiannis N.

    as a refinement of the classical theory of definability (on Polish spaces) developed in the first half of the 20th the notions I need, as well as (condensed) outlines of the required arguments. 1. Recursion in Baire space We

  8. Refinement of light-responsive transcript lists using rice oligonucleotide arrays: evaluation of gene-redundancy.

    E-Print Network [OSTI]

    2008-01-01

    Refinement of Light-Responsive Transcript Lists Using Riceleaves of two-week old plants grown in a natural light-darkcycle (light-grown) in comparison to RNA from October 2008 |

  9. Hazard/Risk Assessment A REFINED AQUATIC ECOLOGICAL RISK ASSESSMENT FOR A PYRETHROID

    E-Print Network [OSTI]

    Peterson, Robert K. D.

    Hazard/Risk Assessment A REFINED AQUATIC ECOLOGICAL RISK ASSESSMENT FOR A PYRETHROID INSECTICIDE risk assessments, the authors performed a probabilistic aquatic ecological risk assessment. The present study is the first ecological risk assessment for pyrethroids to quantitatively integrate

  10. Energy Secretary Moniz Dedicates World's Largest Concentrating...

    Energy Savers [EERE]

    Dedicates World's Largest Concentrating Solar Power Project Energy Secretary Moniz Dedicates World's Largest Concentrating Solar Power Project February 13, 2014 - 5:00am Addthis...

  11. Refine your search Select options from the menu on the left hand

    E-Print Network [OSTI]

    Yener, Aylin

    ://psu.summon.serialssolutions.comhttp://psu.summon.serialssolutions.com F I N A L LY : RESEARCH AS EASYAS 1-2-3 #12;1 Enter search term into search box. 2 Refine results relevant articles were published in that year. Include or Exclude subject terms from your searchRefine your search Select options from the menu on the left hand side of the results screen

  12. A comparison of the performance of waterfloods using similar refined and crude oils 

    E-Print Network [OSTI]

    Walton, Daylon Lynn

    1960-01-01

    A COMPARISON OF THE PERFORMANCE OF WATERFI, GODS USING SIMILAR REFINED AND CRUDE OILS A Thesis By DAYLON L. WALTON Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August, 1960 Major Subject: PETROLEUM ENGINEERING A COMPARISON OF THE PERFORMANCE OF WATERFLOODS USING SIMILAR REFINED AND CRUDE OILS A Thesis By DAYLON L. WALTON Approved as to style and content by: (Chairman f...

  13. 11World-Leading Research with Real-World Impact! Group-Centric Secure Information Sharing

    E-Print Network [OSTI]

    Sandhu, Ravi

    11World-Leading Research with Real-World Impact! Group-Centric Secure Information Sharing client © Ravi Sandhu World-Leading Research with Real-World Impact! Goal: Share but protect Policy-Centric Collaboration © Ravi Sandhu World-Leading Research with Real-World Impact! Collaboration Group Individual

  14. Brane-world Quantum Gravity

    E-Print Network [OSTI]

    M. D. Maia; Nildsen Silva; M. C. B. Fernandes

    2007-04-10

    The Arnowitt-Deser-Misner canonical formulation of general relativity is extended to the covariant brane-world theory in arbitrary dimensions. The exclusive probing of the extra dimensions makes a substantial difference, allowing for the construction of a non-constrained canonical theory. The quantum states of the brane-world geometry are defined by the Tomonaga-Schwinger equation, whose integrability conditions are determined by the classical perturbations of submanifolds contained in the Nash's differentiable embedding theorem. In principle, quantum brane-world theory can be tested by current experiments in astrophysics and by near future laboratory experiments at Tev energy. The implications to the black-hole information loss problem, to the accelerating cosmology, and to a quantum mathematical theory of four-sub manifolds are briefly commented.

  15. World`s LPG supply picture will change by 2000

    SciTech Connect (OSTI)

    True, W.R.

    1995-11-06

    Middle East LPG producers will continue to dominate world export markets in 1996. Led by Saudi Arabia, the Middle East will produce nearly 26 million metric tons of LPG in million metric tons of LPG in 1996, more than 54% of the world`s almost 48 million metric tons of export LPG. In 2000, however, with world exports of LPG expanding to 58.9 million metric tons, Middle East suppliers; share will have remained flat, making up 31.7 million metric tons, or 53.9%. Saudi Arabia`s contribution will exceed 15 million metric tons, reflecting essentially no growth since 1995. These and other patterns, from data compiled by Purvin and Gertz, Dallas, and published earlier this year, show other suppliers of LPG, especially African (Algeria/Nigeria), North Sea, and Latin American (Venezuela/Argentina), picking up larger shares in the last 5 years of this decade. This scenario assumes completion of several major supply projects that are either panned, under construction, or nearing start up in most of these areas. The paper discusses the global picture, the supply situation in the Middle East, Africa, the North Sea, and South America.

  16. World class recreation, bold science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0PhotosPresentations WorkshopSynchrotronWorldWorld class

  17. Inventory redistribution optimization in the fast fashion industry

    E-Print Network [OSTI]

    Kelley, Rachel Avril

    2013-01-01

    Zara is the world's leader in the fast-fashion industry and introduces over 10,000 unique designs to their stores each year. Zara's parent company, Inditex, reported profits of $2.2 billion in 2012, an increase of 27% for ...

  18. The early American motion picture industry: promoting American cultural hegemony 

    E-Print Network [OSTI]

    Wier, Theresa Joanne

    1994-01-01

    For the American motion picture industry, a key period in its development was that which followed World War I until the advent of the techonology of sound film. Film occupied a unique position during this period, as both a product and promoter...

  19. NGV industry infrastructure

    SciTech Connect (OSTI)

    Not Available

    1984-12-01

    Current natural gas vehicle (NGV) technology faces a number of problems that must be overcome before vehicles powered by compressed natural gas become accepted in the US. Among these impediments are regulatory uncertainties, codes, standards and the NGV industry infrastructure itself. The marketing/supply infrastructure necessary to support the NGV industry is described.

  20. and Industrial Engineering

    E-Print Network [OSTI]

    Mountziaris, T. J.

    45 Mechanical and Industrial Engineering 220 Engineering Lab Degrees: Bachelor of Science in Mechanical Engineering Bachelor of Science in Industrial Engineering Contact: James R. Rinderle, Undergraduate Program Director Office: 207C Engineering Lab Building Phone: (413) 545-2505 Head of Department

  1. Fundamentals of Delayed Coking Joint Industry Project

    SciTech Connect (OSTI)

    Michael Volk Jr; Keith Wisecarver

    2005-10-01

    Delayed coking evolved steadily over the early to mid 1900s to enable refiners to convert high boiling, residual petroleum fractions to light products such as gasoline. Pound for pound, coking is the most energy intensive of any operation in a modern refinery. Large amounts of energy are required to heat the thick, poor-quality petroleum residuum to the 900 to 950 degrees F required to crack the heavy hydrocarbon molecules into lighter, more valuable products. One common misconception of delayed coking is that the product coke is a disadvantage. Although coke is a low valued (near zero economic value) byproduct, compared to transportation fuels, there is a significant worldwide trade and demand for coke as it is an economical fuel. Coke production has increased steadily over the last ten years, with further increases forecast for the foreseeable future. Current domestic production is near 111,000 tons per day. A major driving force behind this increase is the steady decline in crude quality available to refiners. Crude slates are expected to grow heavier with higher sulfur contents while environmental restrictions are expected to significantly reduce the demand for high-sulfur residual fuel oil. Light sweet crudes will continue to be available and in even greater demand than they are today. Refiners will be faced with the choice of purchasing light sweet crudes at a premium price, or adding bottom of the barrel upgrading capability, through additional new investments, to reduce the production of high-sulfur residual fuel oil and increase the production of low-sulfur distillate fuels. A second disadvantage is that liquid products from cokers frequently are unstable, i.e., they rapidly form gum and sediments. Because of intermediate investment and operating costs, delayed coking has increased in popularity among refiners worldwide. Based on the 2000 Worldwide Refining Survey published in the Oil and Gas, the delayed coking capacity for 101 refineries around the world is 2,937,439 barrels/calendar day. These cokers produce 154,607 tons of coke per day and delayed coking accounts for 88% of the world capacity. The delayed coking charge capacity in the United States is 1,787,860 b/cd. Despite its wide commercial use, only relatively few contractors and refiners are truly knowledgeable in delayed-coking design, so that this process carries with it a ''black art'' connotation. Until recently, the expected yield from cokers was determined by a simple laboratory test on the feedstock. As a result of Tulsa University's prior related research, a process model was developed that with additional work could be used to optimize existing delayed cokers over a wide range of potential feedstocks and operating conditions. The objectives of this research program are to: utilize the current micro, batch and pilot unit facilities at The University of Tulsa to enhance the understanding of the coking process; conduct additional micro and pilot unit tests with new and in-house resids and recycles to make current optimization models more robust; conduct focused kinetic experiments to enhance the furnace tube model and to enhance liquid production while minimizing sulfur in the products; conduct detailed foaming studies to optimize the process and minimize process upsets; quantify the parameters that affect coke morphology; and to utilize the knowledge gained from the experimental and modeling studies to enhance the computer programs developed in the previous JIP for optimization of the coking process. These refined computer models will then be tested against refinery data provided by the member companies. Novel concepts will also be explored for hydrogen sulfide removal of furnace gases as well as gas injection studies to reduce over-cracking. The following deliverables are scheduled from the two projects of the three-year JIP: (1) A novel method for enhancing liquid yields from delayed cokers and data that provide insight as to the optimum temperature to remove hydrogen sulfide from furnace gases. (2) An understanding of what causes foaming in c

  2. Model documentation report: Industrial sector demand module of the National Energy Modeling System

    SciTech Connect (OSTI)

    NONE

    1997-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its models. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects. The NEMS Industrial Demand Model is a dynamic accounting model, bringing together the disparate industries and uses of energy in those industries, and putting them together in an understandable and cohesive framework. The Industrial Model generates mid-term (up to the year 2015) forecasts of industrial sector energy demand as a component of the NEMS integrated forecasting system. From the NEMS system, the Industrial Model receives fuel prices, employment data, and the value of industrial output. Based on the values of these variables, the Industrial Model passes back to the NEMS system estimates of consumption by fuel types.

  3. Uranium industry annual 1996

    SciTech Connect (OSTI)

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  4. Model of world energy markets and OPEC pricing

    SciTech Connect (OSTI)

    Choe, B.J.

    1984-01-01

    This paper presents an analysis of the world energy and petroleum markets, carried out by means of an econometric simulation model. The model accepts a certain pricing path for OPEC crude oil (a price seen as being chosen by OPEC mainly on the basis of its revenue implications) together with assumptions about GDP and population growth, and generates energy balance projections for seven world regions - three industrial country regions and four developing country groups. The demand side of the model consists of three end-use sectors (transportation, industrial and residential/commercial) and one energy transformation sector (thermal power generation). The model presently has an endogenous supply specification only for coal. The performance of the model in simulating the historical period of the 1970s was reasonably satisfactory. Simulation results under a range of assumptions about future economic growth and OPEC pricing portend that world demand for energy and petroleum is likely to remain at relatively low levels throughout the 1980s and the early 1990s. Past and expected petroleum price increases will provide a strong and sustained incentive to substitute away from energy and petroleum; enough to keep the demand for OPEC oil comfortably within OPEC's productive capacity through the early 1990s. Coal will play a key role as a substitute fuel for the next 20 years. About two-thirds of the projected incremental demand for primary energy between 1978 and the year 2000 is accounted for by developing countries. 87 references, 8 figures, 45 tables.

  5. Posted 3/2/13 Medline Industries Industrial Engineer

    E-Print Network [OSTI]

    Heller, Barbara

    Posted 3/2/13 Medline Industries ­ Industrial Engineer Medline Industries, Inc. has an immediate opening for an Industrial Engineer for our SPT Division located in Waukegan, IL. We are seeking a hard-working, detail-oriented professional with experience in industrial engineering and lean manufacturing within

  6. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  7. INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL & SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in todays global marketplace. The Industrial and Systems engineers task is to take limited Industrial and Systems Engineering Bachelor of Science 128 units Industrial and Systems Engineering

  8. INDUSTRIAL&SYSTEMS Industrial and Systems engineers use

    E-Print Network [OSTI]

    Rohs, Remo

    78 INDUSTRIAL&SYSTEMS Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take · Industrial and Systems Engineering Bachelor of Science 128 units · Industrial and Systems Engineering

  9. ITP Steel: Energy Use in the U.S. Steel Industry: An Historical Perspective

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls21,Equipment:Petroleum Refining Industry (Novemberand

  10. The feasibility of effluent trading in the energy industries

    SciTech Connect (OSTI)

    Veil, J.A.

    1997-05-01

    In January 1996, the U.S. Environmental Protection Agency (EPA) released a policy statement endorsing effluent trading in watersheds, hoping to spur additional interest in the subject. The policy describes five types of effluent trades - point source/point source, point source/nonpoint source, pretreatment, intraplant, and nonpoint source/nonpoint source. This report evaluates the feasibility of effluent trading for facilities in the oil and gas industry (exploration and production, refining, and distribution and marketing segments), electric power industry, and the coal industry (mines and preparation plants). Nonpoint source/nonpoint source trades are not considered since the energy industry facilities evaluated here are all point sources. EPA has administered emission trading programs in its air quality program for many years. Programs for offsets, bubbles, banking, and netting are supported by federal regulations, and the 1990 Clean Air Act (CAA) amendments provide a statutory basis for trading programs to control ozone and acid rain. Different programs have had varying degrees of success, but few have come close to meeting their expectations. Few trading programs have been established under the Clean Water Act (CWA). One intraplant trading program was established by EPA in its effluent limitation guidelines (ELGs) for the iron and steel industry. The other existing effluent trading programs were established by state or local governments and have had minimal success.

  11. World Oil: Market or Mayhem?

    E-Print Network [OSTI]

    Smith, James L.

    2008-01-01

    The world oil market is regarded by many as a puzzle. Why are oil prices so volatile? What is OPEC and what does OPEC do? Where are oil prices headed in the long run? Is “peak oil” a genuine concern? Why did oil prices ...

  12. 3D World Building System

    ScienceCinema (OSTI)

    None

    2014-02-26

    This video provides an overview of the Sandia National Laboratories developed 3-D World Model Building capability that provides users with an immersive, texture rich 3-D model of their environment in minutes using a laptop and color and depth camera.

  13. TODAY'S LIBRARY STRADDLING TWO WORLDS

    E-Print Network [OSTI]

    Angenent, Lars T.

    TODAY'S LIBRARY STRADDLING TWO WORLDS CORNELL'S QUARTERLY MAGAZINE FALL 2012 TODAY'S LIBRARY EL 120333 ON THE COVER In reflection on screen: Jim Morris-Knower, public relations and outreach librarian, Mann Library, left, and Erin Grainger '13, student library assistant, Mann Library. Photos

  14. SOFTWAREENGINEERING The World Wide Web

    E-Print Network [OSTI]

    Whitehead, James

    SOFTWAREENGINEERING The World Wide Web Distributed Authoring and Versioning working group on the Web. WEBDAV: IETF Standard for Collaborative Authoring on the Web E. JAMES WHITEHEAD, JR. University remains to be done. What if instead you could simply edit Web documents (or any Web resource) in place

  15. Advanced Industrial Materials (AIM) Program: Annual progress report FY 1995

    SciTech Connect (OSTI)

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for FY 1995 contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Areas covered here are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  16. World-Systems as Dynamic Networks

    E-Print Network [OSTI]

    White, Douglas R.

    World-Systems as Dynamic Networks Christopher Chase-Dunn Institute for Research on World-Systems on comparative world-systems for the workshop on `analyzing complex macrosystems as dynamic networks" at the Santa Fe Institute, April 29- 30, 2004. (8341 words) v. 4-22-04 1 #12;The comparative world-systems

  17. Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR

    E-Print Network [OSTI]

    Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR FISH AND WILDLIFE SERVICE BUREAU OF COMMERCIAL FISHERIES #12;Industrial Use of Fish Oils UNITED STATES DEPART MENT OF THE INTERIOR 16 IIndustrial Use of Fish Oils INTRODUCTION The world's waters annually produce a tremendous harwst

  18. Symposium and Industrial Affiliates Program Celebrating 25 Years of Excellence in Optics and Photonics

    E-Print Network [OSTI]

    Van Stryland, Eric

    CREOL@25 Symposium and Industrial Affiliates Program Celebrating 25 Years of Excellence in Optics and Photonics CREOL, The College of Optics and Photonics March15-16,2012 #12;#12;CREOL, The College of Optics, Florida, the Nation, and the World CREOL Industrial Partners NGC Laser Systems, Ocean Optics, Analog

  19. An in-depth study of forest products industries in the Pacific Northwest

    E-Print Network [OSTI]

    An in-depth study of forest products industries in the Pacific Northwest Tendayi Mhlanga, World. · Current state of the forest products industry. · Production outlook. #12;· The PNW refers to the forested% of US energy needs. · Sources of biomass are; round-wood, mill residues, logging or woods residue, urban

  20. Energy Consumption and Potential for Energy Conservation in the Steel Industry 

    E-Print Network [OSTI]

    Hughes, M. L.

    1979-01-01

    The domestic steel industry, being energy-use intensive, requires between 4 and 5 percent of total annual domestic energy consumption. More than two-thirds of total steel industry energy, however, is derived from coal. During the post-World War II...

  1. Preliminary assessment of coal-based industrial energy systems

    SciTech Connect (OSTI)

    Not Available

    1980-01-01

    This report presents the results of a study, performed by Mittelhauser Corp. and Resource Engineering, Inc. to identify the potential economic, environmental, and energy impacts of possible New Source Performance Standards for industrial steam generators on the use of coal and coal-derived fuels. A systems-level approach was used to take mine-mouth coal and produce a given quantity of heat input to a new boiler at an existing Chicago industrial-plant site. The technologies studied included post-combustion clean-up, atmospheric fluidized-bed combustion, solvent-refined coal liquids, substitute natural gas, and low-Btu gas. Capital and operating costs were prepared on a mid-1985 basis from a consistent set of economic guidelines. The cases studied were evaluated using three levels of air emission controls, two coals, two boiler sizes, and two operating factors. Only those combinations considered likely to make a significant impact on the 1985 boiler population were considered. The conclusions drawn in the report are that the most attractive applications of coal technology are atmospheric fluidized-bed combustion and post-combustion clean-up. Solvent-refined coal and probably substitute natural gas become competitive for the smaller boiler applications. Coal-derived low-Btu gas was found not to be a competitive boiler fuel at the sizes studied. It is recommended that more cases be studied to broaden the applicability of these results.

  2. Comparison of Real World Energy Consumption to Models and Department of Energy Test Procedures

    SciTech Connect (OSTI)

    Goetzler, William; Sutherland, Timothy; Kar, Rahul; Foley, Kevin

    2011-09-01

    This study investigated the real-world energy performance of appliances and equipment as it compared with models and test procedures. The study looked to determine whether the U.S. Department of Energy and industry test procedures actually replicate real world conditions, whether performance degrades over time, and whether installation patterns and procedures differ from the ideal procedures. The study first identified and prioritized appliances to be evaluated. Then, the study determined whether real world energy consumption differed substantially from predictions and also assessed whether performance degrades over time. Finally, the study recommended test procedure modifications and areas for future research.

  3. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    1 Creating Value for the Wood Products Industry Creating Value for the Wood Products Industry for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all assistance to the primary and value-added processing wood products industries in Louisiana. Since its

  4. Zymomonas mobilis - Science and industrial application

    SciTech Connect (OSTI)

    Doelle, H.W.; Kirk, L.; Crittenden, R.; Toh, Hsien ); Doelle, M.B. )

    1993-01-01

    Zymomonas mobilis is undoubtedly one of the most unique bacterium within the microbial world. Known since 1912 under the names Termobacterium mobilis, Pseudomonas linderi, and Zymomonas mobilis, reviews on its uniqueness have been published in 1977 and 1988. The bacterium zymomonas mobilis not only exhibits an extraordinarily uniqueness in its biochemistry, but also in its growth behavior, energy production, and response to culture conditions, as well as cultivation techniques used. This uniqueness caused great interest in the scientific, biotechnological, and industrial worlds. Its ability to couple and uncouple energy production in favor of product formation, to respond to physical and chemical environment manipulation, as well as its restricted product formation, makes it an ideal microorganism for microbial process development. This review explores the advances made since 1987, together with new developments in the pure scientific and applied commercial areas. 362 refs.

  5. The world`s first commercial iron carbide plant

    SciTech Connect (OSTI)

    Prichard, L.C.; Schad, D.

    1995-12-01

    The paper traces the development of Nucor`s investigation of clean iron unit processes, namely, direct reduction, and the decision to build and operate the world`s first commercial iron carbide plant. They first investigated coal based processes since the US has abundant coal reserves, but found a variety of reasons for dropping the coal-based processes from further consideration. A natural gas based process was selected, but the failure to find economically priced gas supplies stopped the development of a US based venture. It was later found that Trinidad had economically priced and abundant supplies of natural gas, and the system of government, the use of English language, and geographic location were also ideal. The cost estimates required modification of the design, but the plant was begun in April, 1993. Start-up problems with the plant are also discussed. Production should commence shortly.

  6. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, K.C.; Wegerich, S.W.; Singer, R.M.; Mott, J.E.

    1998-06-09

    A system and method are disclosed for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy. 96 figs.

  7. Industrial Process Surveillance System

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    2001-01-30

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  8. Industrial process surveillance system

    DOE Patents [OSTI]

    Gross, Kenneth C. (Bolingbrook, IL); Wegerich, Stephan W. (Glendale Heights, IL); Singer, Ralph M. (Naperville, IL); Mott, Jack E. (Idaho Falls, ID)

    1998-01-01

    A system and method for monitoring an industrial process and/or industrial data source. The system includes generating time varying data from industrial data sources, processing the data to obtain time correlation of the data, determining the range of data, determining learned states of normal operation and using these states to generate expected values, comparing the expected values to current actual values to identify a current state of the process closest to a learned, normal state; generating a set of modeled data, and processing the modeled data to identify a data pattern and generating an alarm upon detecting a deviation from normalcy.

  9. A top-down assessment of energy, water and land use in uranium mining, milling, and refining

    SciTech Connect (OSTI)

    E. Schneider; B. Carlsen; E. Tavrides; C. van der Hoeven; U. Phathanapirom

    2013-11-01

    Land, water and energy use are key measures of the sustainability of uranium production into the future. As the most attractive, accessible deposits are mined out, future discoveries may prove to be significantly, perhaps unsustainably, more intensive consumers of environmental resources. A number of previous attempts have been made to provide empirical relationships connecting these environmental impact metrics to process variables such as stripping ratio and ore grade. These earlier attempts were often constrained by a lack of real world data and perform poorly when compared against data from modern operations. This paper conditions new empirical models of energy, water and land use in uranium mining, milling, and refining on contemporary data reported by operating mines. It shows that, at present, direct energy use from uranium production represents less than 1% of the electrical energy produced by the once-through fuel cycle. Projections of future energy intensity from uranium production are also possible by coupling the empirical models with estimates of uranium crustal abundance, characteristics of new discoveries, and demand. The projections show that even for the most pessimistic of scenarios considered, by 2100, the direct energy use from uranium production represents less than 3% of the electrical energy produced by the contemporary once-through fuel cycle.

  10. World`s developing regions provide spark for pipeline construction

    SciTech Connect (OSTI)

    Koen, A.D.; True, W.R.

    1996-02-05

    This paper reviews the proposed construction of oil and gas pipelines which are underway or proposed to be started in 1996. It breaks down the projects by region of the world, type of product to be carried, and diameter of pipeline. It also provides mileage for each category of pipeline. Major projects in each region are more thoroughly discussed giving details on construction expenditures, construction problems, and political issues.

  11. Model documentation report: Industrial sector demand module of the national energy modeling system

    SciTech Connect (OSTI)

    NONE

    1998-01-01

    This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Model. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code. This document serves three purposes. First, it is a reference document providing a detailed description of the NEMS Industrial Model for model analysts, users, and the public. Second, this report meets the legal requirements of the Energy Information Administration (EIA) to provide adequate documentation in support of its model. Third, it facilitates continuity in model development by providing documentation from which energy analysts can undertake model enhancements, data updates, and parameter refinements as future projects.

  12. Oklahoma Industrial Energy Management Program 

    E-Print Network [OSTI]

    Turner, W. C.; Webb, R. E.; Phillips, J. M.; Viljoen, T. A.

    1979-01-01

    series of tuition free Industrial Energy Management Conferences (over 20 given to date involving many Oklahoma industries). 2. A free energy newsletter entitled "Energy Channel" mailed to all participating Oklahoma industries. 3. A series of Energy...

  13. Innovative Energy Efficient Industrial Ventilation 

    E-Print Network [OSTI]

    Litomisky, A.

    2005-01-01

    This paper was written to describe an innovative “on-demand” industrial ventilation system for woodworking, metalworking, food processing, pharmaceutical, chemical, and other industries. Having analyzed existing industrial ventilation in 130...

  14. An adaptive grid refinement strategy for the simulation of negative streamers

    SciTech Connect (OSTI)

    Montijn, C. . E-mail: carolynne.montijn@cwi.nl; Hundsdorfer, W. . E-mail: willem.hundsdorfer@cwi.nl; Ebert, U. . E-mail: ute.ebert@cwi.nl

    2006-12-10

    The evolution of negative streamers during electric breakdown of a non-attaching gas can be described by a two-fluid model for electrons and positive ions. It consists of continuity equations for the charged particles including drift, diffusion and reaction in the local electric field, coupled to the Poisson equation for the electric potential. The model generates field enhancement and steep propagating ionization fronts at the tip of growing ionized filaments. An adaptive grid refinement method for the simulation of these structures is presented. It uses finite volume spatial discretizations and explicit time stepping, which allows the decoupling of the grids for the continuity equations from those for the Poisson equation. Standard refinement methods in which the refinement criterion is based on local error monitors fail due to the pulled character of the streamer front that propagates into a linearly unstable state. We present a refinement method which deals with all these features. Tests on one-dimensional streamer fronts as well as on three-dimensional streamers with cylindrical symmetry (hence effectively 2D for numerical purposes) are carried out successfully. Results on fine grids are presented, they show that such an adaptive grid method is needed to capture the streamer characteristics well. This refinement strategy enables us to adequately compute negative streamers in pure gases in the parameter regime where a physical instability appears: branching streamers.

  15. Caraustar Industries Energy Assessment

    SciTech Connect (OSTI)

    2010-06-25

    This plant-wide assessment case study is about commissioned energy assessments by the U.S. Department of Energy Industrial Technologies Program at two of Caraustar's recycled paperboard mills.

  16. Industrial Decision Making 

    E-Print Network [OSTI]

    Elliott, R. N.; McKinney, V.; Shipley, A.

    2008-01-01

    Domestic industrial investment has declined due to unfavorable energy prices, and external markets. Investment behavior has changed over the past few years, and will continue due to high labor costs, tight markets and an unstable U.S. economy...

  17. Industrial Assessment Center

    SciTech Connect (OSTI)

    J. Kelly Kissock; Becky Blust

    2007-04-17

    The University of Dayton (UD) performed energy assessments, trained students and supported USDOE objectives. In particular, the UD Industrial Assessment Center (IAC) performed 96 industrial energy assessment days for mid-sized manufacturers. The average identified and implemented savings on each assessment were $261,080 per year and $54,790 per year. The assessments served as direct training in industrial energy efficiency for 16 UD IAC students. The assessments also served as a mechanism for the UD IAC to understand manufacturing energy use and improve upon the science of manufacturing energy efficiency. Specific research results were published in 16 conference proceedings and journals, disseminated in 22 additional invited lectures, and shared with the industrial energy community through the UD IAC website.

  18. BTU Accounting for Industry 

    E-Print Network [OSTI]

    Redd, R. O.

    1979-01-01

    Today, as never before, American industry needs to identify and control their most critical resources. One of these is energy. In 1973 and again in 1976, the American public and business was confronted with critical energy supply problems. As a...

  19. AI Industrial Engineering 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    This paper describes the California Energy Commission’s (Commission) energy policies and programs that save energy and money for California’s manufacturing and food processing industries to help retain businesses in-state and reduce greenhouse gases...

  20. Uranium Industry Annual, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-28

    The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

  1. Load Management for Industry 

    E-Print Network [OSTI]

    Konsevick, W. J., Jr.

    1982-01-01

    categories: Thermal Energy Storage, Communication and Load Control, Interconnection and Operation of Power Systems, and Selective Load Promotions. The endeavors of the utility industry and Ohio Edison Company in three of the four categories are described...

  2. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2009-05-15

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  3. Utility and Industrial Partnerships 

    E-Print Network [OSTI]

    Sashihara, T. F.

    1989-01-01

    In the past decade, many external forces have shocked both utilities and their large industrial customers into seeking more effective ways of coping and surviving. One such way is to develop mutually beneficial partnerships optimizing the use...

  4. Industrial energy use indices 

    E-Print Network [OSTI]

    Hanegan, Andrew Aaron

    2008-10-10

    Energy use index (EUI) is an important measure of energy use which normalizes energy use by dividing by building area. Energy use indices and associated coefficients of variation are computed for major industry categories ...

  5. Animal Industries Building 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Industrial steam users recognize the need to reduce system cost in order to remain internationally competitive. Steam systems are a key utility that influence cost significantly, and represent a high value opportunity ...

  6. Steel Industry Profile

    Broader source: Energy.gov [DOE]

    The steel industry is critical to the U.S. economy. Steel is the material of choice for many elements of manufacturing, construction, transportation, and various consumer products. Traditionally...

  7. World nuclear capacity and fuel cycle requirements, November 1993

    SciTech Connect (OSTI)

    Not Available

    1993-11-30

    This analysis report presents the current status and projections of nuclear capacity, generation, and fuel cycle requirements for all countries in the world using nuclear power to generate electricity for commercial use. Long-term projections of US nuclear capacity, generation, fuel cycle requirements, and spent fuel discharges for three different scenarios through 2030 are provided in support of the Department of Energy`s activities pertaining to the Nuclear Waste Policy Act of 1982 (as amended in 1987). The projections of uranium requirements also support the Energy Information Administration`s annual report, Domestic Uranium Mining and Milling Industry: Viability Assessment.

  8. World-Leading Research with Real-World Impact! Constraints Specification for Virtual

    E-Print Network [OSTI]

    Sandhu, Ravi

    1 World-Leading Research with Real-World Impact! Constraints Specification for Virtual Resource) 1 #12;2 World-Leading Research with Real-World Impact! Outline Introduction Motivation Goal Methodology Enforcement (in Cloud IaaS) Implementation (in OpenStack) Conclusion 2 #12;3 World

  9. A Big World Inside Small-World Networks Zhihua Zhang, Jianzhi Zhang*

    E-Print Network [OSTI]

    Zhang, Jianzhi

    A Big World Inside Small-World Networks Zhihua Zhang, Jianzhi Zhang* Department of Ecology networks, including biological networks, are known to have the small-world property, characterized: Zhang Z, Zhang J (2009) A Big World Inside Small-World Networks. PLoS ONE 4(5): e5686. doi:10

  10. Superior Energy Performance Industrial Facility Best Practice...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Facility Best Practice Scorecard Superior Energy Performance Industrial Facility Best Practice Scorecard Superior Energy Performance logo Industrial facilities seeking...

  11. Real World Interpretations of Quantum Theory

    E-Print Network [OSTI]

    Adrian Kent

    2011-11-03

    I propose a new class of interpretations, {\\it real world interpretations}, of the quantum theory of closed systems. These interpretations postulate a preferred factorization of Hilbert space and preferred projective measurements on one factor. They give a mathematical characterisation of the different possible worlds arising in an evolving closed quantum system, in which each possible world corresponds to a (generally mixed) evolving quantum state. In a realistic model, the states corresponding to different worlds should be expected to tend towards orthogonality as different possible quasiclassical structures emerge or as measurement-like interactions produce different classical outcomes. However, as the worlds have a precise mathematical definition, real world interpretations need no definition of quasiclassicality, measurement, or other concepts whose imprecision is problematic in other interpretational approaches. It is natural to postulate that precisely one world is chosen randomly, using the natural probability distribution, as the world realised in Nature, and that this world's mathematical characterisation is a complete description of reality.

  12. WORLD ROBOTICS 2009 EXECUTIVE SUMMARY of

    E-Print Network [OSTI]

    De Luca, Alessandro

    of industrial robots since 2005 has two reasons: · The automotive industry strengthened its investments in traditional markets. · Many non-automotive sectors like the rubber and plastics industry, the metal the automotive and electrical/electronics industry in 2005, purchases in both sectors were down in 2006 and 2007

  13. WORLD ROBOTICS 2011 EXECUTIVE SUMMARY of

    E-Print Network [OSTI]

    De Luca, Alessandro

    industry In 2010, robot sales almost doubled compared to 2009 to 118,337 units. The automotive industry. The automotive industry still remained the main customer, but the increase of robot orders was below average,025 units to 513 units. There were almost no investments taking place in the automotive industry

  14. Submitted to The First World Congress on Integrated Design and Process Technology Integrated Production Systems for

    E-Print Network [OSTI]

    Foss, Bjarne A.

    and petrochemical plants, oil-processing plants including re neries, pulp and paper plants, metallurgical plantsSubmitted to The First World Congress on Integrated Design and Process Technology Integrated Production Systems for The Process Industries yBjarne A. Foss 1, zRoger Klev, zMorten Levin, xKristian Lien y

  15. Building a comprehensive suite of technologies on the World Wide Web for the Pathfinder project 

    E-Print Network [OSTI]

    Graham, Scott Allen

    2000-01-01

    of the project. There is also a need for self-paced education concerning the industrial engineering principles applicable to this project. By developing a site on the World Wide Web, we can minimize the time and expense spent passing information and tutorials...

  16. DTorial: An interactive tutorial framework for blind users in a Web 2.0 world

    E-Print Network [OSTI]

    Karahalios, Karrie G.

    DTorial: An interactive tutorial framework for blind users in a Web 2.0 world Joshua Hailpern1 to new Web- Applications. Keywords: Tutorial, Help Systems, Web 2.0, Screen Reader, Blind, Visually such a mental model is a time consuming process. This process is complicated by industry's adoption of Web 2.0

  17. Automating crystallographic structure solution and refinement of protein–ligand complexes

    SciTech Connect (OSTI)

    Echols, Nathaniel, E-mail: nechols@lbl.gov; Moriarty, Nigel W., E-mail: nechols@lbl.gov; Klei, Herbert E.; Afonine, Pavel V. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); Bunkóczi, Gábor [University of Cambridge, Cambridge Institute for Medical Research, Wellcome Trust/MRC Building, Cambridge CB2 0XY (United Kingdom); Headd, Jeffrey J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); McCoy, Airlie J.; Oeffner, Robert D.; Read, Randy J. [University of Cambridge, Cambridge Institute for Medical Research, Wellcome Trust/MRC Building, Cambridge CB2 0XY (United Kingdom); Terwilliger, Thomas C. [Los Alamos National Laboratory, Los Alamos, NM 87545-0001 (United States); Adams, Paul D., E-mail: nechols@lbl.gov [Lawrence Berkeley National Laboratory, Berkeley, CA 94720-8235 (United States); University of California at Berkeley, Berkeley, CA 94720-1762 (United States)

    2014-01-01

    A software system for automated protein–ligand crystallography has been implemented in the Phenix suite. This significantly reduces the manual effort required in high-throughput crystallographic studies. High-throughput drug-discovery and mechanistic studies often require the determination of multiple related crystal structures that only differ in the bound ligands, point mutations in the protein sequence and minor conformational changes. If performed manually, solution and refinement requires extensive repetition of the same tasks for each structure. To accelerate this process and minimize manual effort, a pipeline encompassing all stages of ligand building and refinement, starting from integrated and scaled diffraction intensities, has been implemented in Phenix. The resulting system is able to successfully solve and refine large collections of structures in parallel without extensive user intervention prior to the final stages of model completion and validation.

  18. Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst

    E-Print Network [OSTI]

    Mountziaris, T. J.

    9/13/2007 Mechanical and Industrial Engineering Industry Advisory Board University of Massachusetts Amherst Department of Mechanical and Industrial Engineering About the Mechanical and Industrial Engineering Industry Advisory Board The purpose of the Mechanical and Industrial Engineering Industry Advisory

  19. Free kick instead of cross-validation in maximum-likelihood refinement of macromolecular crystal structures

    SciTech Connect (OSTI)

    Pražnikar, Jure [Institute Jožef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); University of Primorska, (Slovenia); Turk, Dušan, E-mail: dusan.turk@ijs.si [Institute Jožef Stefan, Jamova 39, 1000 Ljubljana (Slovenia); Center of Excellence for Integrated Approaches in Chemistry and Biology of Proteins, (Slovenia)

    2014-12-01

    The maximum-likelihood free-kick target, which calculates model error estimates from the work set and a randomly displaced model, proved superior in the accuracy and consistency of refinement of crystal structures compared with the maximum-likelihood cross-validation target, which calculates error estimates from the test set and the unperturbed model. The refinement of a molecular model is a computational procedure by which the atomic model is fitted to the diffraction data. The commonly used target in the refinement of macromolecular structures is the maximum-likelihood (ML) function, which relies on the assessment of model errors. The current ML functions rely on cross-validation. They utilize phase-error estimates that are calculated from a small fraction of diffraction data, called the test set, that are not used to fit the model. An approach has been developed that uses the work set to calculate the phase-error estimates in the ML refinement from simulating the model errors via the random displacement of atomic coordinates. It is called ML free-kick refinement as it uses the ML formulation of the target function and is based on the idea of freeing the model from the model bias imposed by the chemical energy restraints used in refinement. This approach for the calculation of error estimates is superior to the cross-validation approach: it reduces the phase error and increases the accuracy of molecular models, is more robust, provides clearer maps and may use a smaller portion of data for the test set for the calculation of R{sub free} or may leave it out completely.

  20. Studies on design of a process for organo-refining of coal to obtain super clean coal

    SciTech Connect (OSTI)

    Sharma, C.S.; Sharma, D.K. [Indian Inst. of Tech., New Delhi (India). Centre for Energy Studies

    1999-08-01

    Organo-refining of coal results in refining the coal to obtain super clean coal and residual coal. Super clean coal may be used to obtain value added chemicals, products, and cleaner fuels from coal. In the present work, studies on the design of a semicontinuous process for organo-refining of one ton of coal have been made. The results are reported. This is only a cursory attempt for the design, and further studies may be required for designing this process for use in the development of a scaled-up process of organo-refining of coal.

  1. The atomic structure of the cleaved Si(111)-(2x1) surface refined by dynamical LEED

    E-Print Network [OSTI]

    2004-01-01

    Surface Crystallography by LEED”, p.30, Spinger-Verlag, Bby automated tensor LEED (the number of optimized parametersSurface Refined by Dynamical LEED Geng Xu, Bingcheng Deng,*

  2. 1 Industrial Electron Accelerators type ILU for Industrial Technologies

    E-Print Network [OSTI]

    1 Industrial Electron Accelerators type ILU for Industrial Technologies The present work describes industrial electron accelerators of the ILU family. Their main parameters, design, principle of action the pulse linear accelerators type ILU are developed and supplied to the industry. The ILU machines

  3. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take to introduce the philosophy, subject matter, aims, goals, and techniques of industrial and systems engineering

  4. industrial & systems Industrial and Systems engineers use engineering

    E-Print Network [OSTI]

    Rohs, Remo

    78 industrial & systems Industrial and Systems engineers use engineering and business principles companies compete in today's global marketplace. The Industrial and Systems engineer's task is to take s e n G i n e e r i n G ( i s e ) ISE 105 Introduction to Industrial and Systems Engineering (2, Fa

  5. MIT and Building/Construction & Related Industries MIT Industry Brief

    E-Print Network [OSTI]

    Kastner, Marc A.

    MIT and Building/Construction & Related Industries MIT Industry Brief MIT's Industrial Liaison-617-253-2691, e-mail us at liaison@ilp.mit.edu, or visit http://ilp.mit.edu. MIT and Building and education on topics important to build- ing, construction, and related areas and industries such as

  6. Liquid-liquid extraction as the means of refining cottonseed oil 

    E-Print Network [OSTI]

    Patel, Manubhai Chunibhai

    1956-01-01

    LIBRARY A 4 AI CvLLEGE OF TEXAS LIOVID-LIQUID EXTRACTION AS THE MEANS OI REFINING CCTTONSEFZ OIL A Thesis By 1'RVUBHAI CHIINIBHAI PATEL a 0 U z A R 0 Submitted to the Graduate School of the Agricultural and Mechanical College of Texas... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Auuust 1996 Major Subject Chemical ineeri LIQUID-LIQUID EXTRACTION AS THE MEANS OF REFINING COTTONSEED OIL A Thesis By MANUBHAI CHUNIBHAI PATEL Approved as to style...

  7. Proceedings of the opportunities in the synfuels industry

    SciTech Connect (OSTI)

    Not Available

    1992-12-31

    World interest in coal-based synthetic fuels technology is like a roller coaster ride. Interest soars when energy prices are high or world oil supplies are threatened. When energy is inexpensive and oil is plentiful, interest plummets. However, some people remain undaunted by the ups and downs of the synfuels industry. They cling tenaciously to the idea that coal-based synthetic fuels are the world`s energy future. They are the select group attending the SynOps `92 symposium in Bismarck, North Dakota. SynOps `92 participants represent an extraordinary combination of visionaries and practical thinkers. They believe the ``coal refinery`` concept will eventually provide the most efficient and productive use of our coal resources. They know that coal is a valuable resource which can be used to produce a huge variety of valuable nonfuel products. They also recognize that until technology can make alternative fuels economically feasible, the world will continue to rely heavily on fossil fuels--especially coal, the world`s most abundant energy resource. Individual papers have been entered.

  8. Next Generation Lunch: Revealing the World’s First 3D Printed Car (text version)

    Office of Energy Efficiency and Renewable Energy (EERE)

    Below is the text version for the Next Generation Lunch: Revealing the World’s First 3D Printed Car Video.

  9. Multiple Scales in Small-World Networks

    E-Print Network [OSTI]

    Kasturirangan, Rajesh

    1999-08-11

    Small-world architectures may be implicated in a range of phenomena from networks of neurons in the cerebral cortex to social networks and propogation of viruses. Small-world networks are interpolations of regular and ...

  10. UAIEE and Industrial Assessment Centers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    55-62011| Industrial Assessment Centers * Started in 1976 * Currently 26 Centers across the US * Almost...

  11. Wind World | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (Utility Company)Idaho)VosslohWestConnecticut:Wind World Place: Denmark

  12. CHINA'S SOFTWARE INDUSTRY CURRENT STATUS AND DEVELOPMENT STRATEIES Hongli Hu, Xi'an Jiaotong University, hhl@xjtu.edu.cn, Tel: +86-29-527-6916

    E-Print Network [OSTI]

    Lin, Zhangxi

    in the world. This paper focuses the discussion on four issues regarding China's software industry developmentCHINA'S SOFTWARE INDUSTRY ­ CURRENT STATUS AND DEVELOPMENT STRATEIES Hongli Hu, Xi'an Jiaotong: Although software industry in China is still at the primitive stage, with her huge personnel resource

  13. Solar industrial process heat

    SciTech Connect (OSTI)

    Lumsdaine, E.

    1981-04-01

    The aim of the assessment reported is to candidly examine the contribution that solar industrial process heat (SIPH) is realistically able to make in the near and long-term energy futures of the United States. The performance history of government and privately funded SIPH demonstration programs, 15 of which are briefly summarized, and the present status of SIPH technology are discussed. The technical and performance characteristics of solar industrial process heat plants and equipment are reviewed, as well as evaluating how the operating experience of over a dozen SIPH demonstration projects is influencing institutional acceptance and economoc projections. Implications for domestic energy policy and international implications are briefly discussed. (LEW)

  14. Industrial Heat Recovery - 1982 

    E-Print Network [OSTI]

    Csathy, D.

    1982-01-01

    Industrial Research HTFS Re search Programme HTFS/1S/R19, "Dryout and Flow in Horizontal and Horizontal Hairpin Tubes". 6 l\\rnerican Boiler I1anufacturers Assoc iation, "Lexicon, Boiler & Auxiliary Eauinment", 7 G:t=iffith P., book of I:eat senow N... RECOVERY - 1982 by Denis Csathy, Deltak Corn,oration, !1inneapolis, 11N Two years ago I summarized 20 years of ex perience on Industrial Heat Recovery for the Energy-source Technology Conference and Exhibition held in New Orleans, Louisiana. l...

  15. Neal Lane: Science in a Flat World

    SciTech Connect (OSTI)

    Neal Lane

    2006-09-12

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  16. WORLD DATA CENTER for Oceanography, Silver Spring

    E-Print Network [OSTI]

    0 WORLD DATA CENTER for Oceanography, Silver Spring CATALOGUE OF DATA and REPORT OF DATA EXCHANGE 2000 - 2001 #12;World Data Centers conduct international exchange of geophysical observations are established in the United States under the auspices of the National Academy of Sciences. #12;WORLD DATA CENTER

  17. Neal Lane: Science in a Flat World

    ScienceCinema (OSTI)

    Neal Lane

    2010-09-01

    Lane discusses the changes that have taken place in the world since World War II that have made it "flatter," referring to Thomas L. Friedman's book, The World is Flat. Friedman's main premise is that inexpensive telecommunications is bringing about unhampered international competition, the demise of economic stability, and a trend toward outsourcing services, such as computer programming, engineering and science research.

  18. world cultures J. Patrick Gray, Editor

    E-Print Network [OSTI]

    White, Douglas R.

    1045-0564 world cultures J. Patrick Gray, Editor PROLEGOMENA Contents and How to Use This Issue J: A Reconsideration Andrey Korotayev World Cultures CD Data Disk William Divale Journal of Comparative and Cross-Cultural Research Vol 13 No 1 Spring 2002 #12;WORLD CULTURES PUBLISHER William Divale EDITOR J. Patrick Gray

  19. world cultures J. Patrick Gray, Editor

    E-Print Network [OSTI]

    White, Douglas R.

    1045-0564 world cultures J. Patrick Gray, Editor PROLEGOMENA Contents and How to Use This Issue J in Cross-Cultural Perspective: A Reconsideration Andrey Korotayev World Cultures CD Data Disk William Divale Journal of Comparative and Cross-Cultural Research Vol 12 No 2 Fall 2001 #12;WORLD CULTURES

  20. World-line approach to Sign Problems

    E-Print Network [OSTI]

    Aarts, Gert

    World-line approach to Sign Problems Shailesh Chandrasekharan Duke University #12;Outline XY model + chemical potential world-line approach solving the silver blaze problem! Two component bosons + Abelian world-line approach solving the silver blaze problem! more flavors + solving sign problems