Powered by Deep Web Technologies
Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Geology And A Working Conceptual Model Of The Obsidian Butte (Unit 6)  

Open Energy Info (EERE)

Geology And A Working Conceptual Model Of The Obsidian Butte (Unit 6) Geology And A Working Conceptual Model Of The Obsidian Butte (Unit 6) Sector Of The Salton Sea Geothermal Field, California Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Geology And A Working Conceptual Model Of The Obsidian Butte (Unit 6) Sector Of The Salton Sea Geothermal Field, California Details Activities (2) Areas (1) Regions (0) Abstract: A working conceptual model has been developed for the southwestern portion of the Salton Sea geothermal system, the region encompasing CalEnergy Operating Company's imnent 'Unit 6' field expansion (185 megawatts). The model is based on examination and analysis of several thousand borehole rock samples combined with a wealth of subsurface information made available for the first time from the databases of present

2

An overview of severe accident modeling and analysis work for the ANS reactor conceptual safety analysis report  

Science Conference Proceedings (OSTI)

ORNL`s Advanced Neutron Source (ANS) will be a new user facility for all kinds of neutron research, centered around a research reactor of unprecedented neutron beam flux. A defense-in-depth philosophy has been adopted. In response to this commitment, ANS Project management has initiated severe accident analysis and related technology development efforts early-on in the design phase itself. Early consideration of severe accident issues will aid in designing a sufficiently robust containment for retention and controlled release of radionuclides in the event of such an accident. It will also provide a means for satisfying on- and off-site regulatory requirements and provide containment response and source term analyses for level-2 and -3 Probabilistic Risk Analyses (PRAs) that will be produced. Moreover, it will provide the best possible understanding of the ANS under severe accident conditions, and consequently provide insights for the development of strategies and design philosophies for accident management, mitigation, and emergency preparedness. This paper presents a perspective overview of the severe accident modeling and analysis work for the ANS Conceptual Safety Analysis Report (CSAR)

Taleyarkhan, R.P.

1992-12-31T23:59:59.000Z

3

Definition: Conceptual Model | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Conceptual Model Jump to: navigation, search Dictionary.png Conceptual Model In the broadest terms, a conceptual model is anything used to represent anything else. In geothermal exploration a conceptual model is a descriptive and qualitative model (not used for calculations) integrating and bringing together the physical features of a system to create a representation of the geothermal reservoir.[1] View on Wikipedia Wikipedia Definition In the most general sense, a model is anything used in any way to represent anything else. Some models are physical objects, for instance, a toy model which may be assembled, and may even be made to work like the object it represents. Whereas, a conceptual model is a model that exists

4

Conceptual Model | Open Energy Information  

Open Energy Info (EERE)

Conceptual Model Conceptual Model Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Conceptual Model Details Activities (17) Areas (4) Regions (0) NEPA(0) Exploration Technique Information Exploration Group: Data and Modeling Techniques Exploration Sub Group: Modeling Techniques Parent Exploration Technique: Modeling Techniques Information Provided by Technique Lithology: Rock types, rock chemistry, stratigraphic layer organization Stratigraphic/Structural: Location and shape of permeable and non-permeable structures, faults, fracture patterns Hydrological: Hydrothermal fluid flow characteristics, up-flow patterns Thermal: Temperature and pressure extrapolation throughout reservoir, heat source characteristics Dictionary.png Conceptual Model:

5

Visual Conceptualizations and Models of Science  

E-Print Network (OSTI)

This Journal of Informetrics special issue aims to improve our understanding of the structure and dynamics of science by reviewing and advancing existing conceptualizations and models of scholarly activity. Several of these conceptualizations and models have visual manifestations supporting the combination and comparison of theories and approaches developed in different disciplines of science. Subsequently, we discuss challenges towards a theoretically grounded and practically useful science of science and provide a brief chronological review of relevant work. Then, we exemplarily present three conceptualizations of science that attempt to provide frameworks for the comparison and combination of existing approaches, theories, laws, and measurements. Finally, we discuss the contributions of and interlinkages among the eight papers included in this issue. Each paper makes a unique contribution towards conceptualizations and models of science and roots this contribution in a review and comparison with existing w...

Boerner, Katy

2009-01-01T23:59:59.000Z

6

A conceptual model for service availability  

E-Print Network (OSTI)

Traditionally, availability has been seen as an atomic property asserting the average time a system is “up ” or “down”. In order to model and analyse the availability of computerised systems in a world where the dependency on and complexity of such systems are increasing, this notion of availability is no longer sufficient. This report presents a conceptual model for service availability designed to handle these challenges. The core of this model is a characterisation of service availability by means of accessibility properties and exclusivity properties, which is further specialised into measurable aspects of service availability. We outline how this conceptual model may be refined to a framework for specifying and analysing availability requirements.

Judith E. Y. Rossebø; Mass Soldal Lund; Knut-eilif Husa; Atle Refsdal

2006-01-01T23:59:59.000Z

7

Conceptual Modeling for Customized XML Schemas  

E-Print Network (OSTI)

XML was initially developed for document management, but it is becoming increasingly used for storing and exchanging all kinds of data on the Internet. In this paper, we introduce a design methodology for XML schemas that is based upon well-understood conceptual modeling methodologies. Because XML is hierarchical (tree-structured), many different XML schemas (or document structures) can be generated from the same conceptual database schema. We describe algorithms for generating customized hierarchical views from EER model, creating XML schemas from hierarchical views, generating SQL queries corresponding to the XML schemas, and creating XML instance documents from the query results. Ó 2004 Elsevier B.V. All rights reserved.

Ramez Elmasri; Qing Li; Jack Fu; Yu-chi Wu; Babak Hojabri; Swathi Ande

2002-01-01T23:59:59.000Z

8

Conceptual Modeling for Data Integration  

Science Conference Proceedings (OSTI)

The goal of data integration is to provide a uniform access to a set of heterogeneous data sources, freeing the user from the knowledge about where the data are, how they are stored, and how they can be accessed. One of the outcomes of the research work ...

Diego Calvanese; Giuseppe Giacomo; Domenico Lembo; Maurizio Lenzerini; Riccardo Rosati

2009-07-01T23:59:59.000Z

9

On Ontology, ontologies, Conceptualizations, Modeling Languages, and (Meta)Models  

Science Conference Proceedings (OSTI)

In philosophy, the term ontology has been used since the 17th century to refer both to a philosophical discipline (Ontology with a capital “O”), and as a domain-independent system of categories that can be used in the conceptualization of ... Keywords: Conceptual Modeling, Formal Ontology, Language Adequacy, Metamodeling

Giancarlo Guizzardi

2007-06-01T23:59:59.000Z

10

Geothermal resource conceptual models using surface exploration data | Open  

Open Energy Info (EERE)

Geothermal resource conceptual models using surface exploration data Geothermal resource conceptual models using surface exploration data Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal resource conceptual models using surface exploration data Abstract The most important element of an analysis to target a geothermal well or assess resource capacity is a resource conceptual model consistent with the available information. A common alternative approach to both targeting and assessment is to focus on a data anomaly or, in some cases, several stacked anomalies. However, even stacked anomalies are commonly misleading without support from a conceptual model. The most important element of a geothermal conceptual model is a predicted natural state isotherm pattern, especially in section view. Although inferring such an isotherm pattern at an

11

Conceptual Model At Coso Geothermal Area (1990) | Open Energy Information  

Open Energy Info (EERE)

Conceptual Model At Coso Geothermal Area (1990) Conceptual Model At Coso Geothermal Area (1990) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Conceptual Model Activity Date 1990 Usefulness useful DOE-funding Unknown Exploration Basis To develop an understanding of the fracture hydrology of the Coso Mountains crystalline terrain and its hydrologic connection to regional groundwater and thermal source Notes An interpreted, conceptually balanced regional cross section that extends from the Sierra Nevada through the geothermal reservoir to the Panamint Mountains is presented. The cross section is constrained by new reflection and refraction seismic data, gravity and magnetic modeling, drilling data from the geothermal reservoir, and published regional geologic mapping. The

12

Seismic Reflection Data and Conceptual Models for Geothermal...  

Open Energy Info (EERE)

Reflection Data and Conceptual Models for Geothermal Development in Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Seismic Reflection...

13

An Updated Conceptual Model Of The Travale Geothermal Field Based...  

Open Energy Info (EERE)

Travale Geothermal Field Based On Recent Geophysical And Drilling Data Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: An Updated Conceptual Model Of...

14

Conceptual Models of Geothermal Systems - Introduction | Open Energy  

Open Energy Info (EERE)

Conceptual Models of Geothermal Systems - Introduction Conceptual Models of Geothermal Systems - Introduction Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Conceptual Models of Geothermal Systems - Introduction Abstract The key to the successful exploration, development (incl. drilling) and utilization of any type of geothermal system is a clear definition and understanding of the nature and characteristics of the system in question. This is best achieved through the development of a conceptual model of the system, which is a descriptive or qualitative model incorporating, and unifying, the essential physical features of the system. Conceptual models are mainly based on analysis of geological and geophysical information, temperature and pressure data, information on reservoir properties as well

15

Conceptual Model At Raft River Geothermal Area (1981) | Open Energy  

Open Energy Info (EERE)

Conceptual Model At Raft River Geothermal Area (1981) Conceptual Model At Raft River Geothermal Area (1981) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Raft River Geothermal Area (1981) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1981 Usefulness not indicated DOE-funding Unknown Exploration Basis Use geoscience data to develop a conceptual model of the reservoir. Notes The geoscience data gathered in the drilling and testing of seven geothermal wells suggest that the thermal reservoir is: (a) produced from fractures found at the contact metamorphic zone, apparently the base of detached normal faulting from the Bridge and Horse Well Fault zones of the Jim Sage Mountains; (b) anisotropic, with the major axis of hydraulic

16

Conceptual Model At Raft River Geothermal Area (1979) | Open Energy  

Open Energy Info (EERE)

79) 79) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1979 Usefulness not indicated DOE-funding Unknown Exploration Basis Recommendations are made concerning field expansion and additional work needed to refine the overall reservoir model. Notes Models described in this report show the source of various minerals in the geothermal water. There appears to be a regional heat source that gives rise to uniform conductive heat flow in the region, but convective flow is concentrated near the upwelling in the Crook well vicinity. References Overton, H. L.; Chaney, R. E.; Mcatee, R. E.; Graham, D. L. (1 November 1979) Geochemical modeling of the Raft River geothermal field Overton, H. L.; Chaney, R. E.; Mcatee, D. L.; Graham, D. L. (1

17

Conceptual Model At Raft River Geothermal Area (1988) | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Conceptual Model At Raft River Geothermal Area (1988) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Raft River Geothermal Area (1988) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1988 Usefulness not indicated DOE-funding Unknown Exploration Basis Use geophysical logs to determine the reservoir transmissivity Notes Seven fracture orientation sets are recognized in the sedimentary and metamorphic rock units. Although the conventional geophysical logs showed

18

Conceptual Model At Raft River Geothermal Area (1990) | Open Energy  

Open Energy Info (EERE)

Conceptual Model At Raft River Geothermal Area (1990) Conceptual Model At Raft River Geothermal Area (1990) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1990 Usefulness not indicated DOE-funding Unknown Exploration Basis Develop a conceptual model to explain the exposed rocks. Notes Although commonly obscured by simple shear, pure shear fabrics occur locally within many metamorphic core complexes. The cover rocks of the Raft River metamorphic core complex exposed within the Black Pine Mountains display an early coaxial strain history which developed prior to the formation of low-angle fault-bounded allochthons. At higher structural levels this is documented by pressure shadows with straight sutures, and oppositely-rotated antitaxial calcite veins.

19

When conceptual model meets grammar: A dual approach to XML data modeling  

Science Conference Proceedings (OSTI)

In this paper we introduce a novel approach to conceptual modeling for XML schemas. Compared to other approaches, it allows for modeling of a whole family of XML schemas related to a particular application domain. It is integrated in a well-established ... Keywords: Conceptual modeling, Conceptual to XML schema transformation, Regular tree grammars, XML schema

Martin Necasky; Irena Mlynkova; Jakub Klimek; Jakub Maly

2012-02-01T23:59:59.000Z

20

Seismic Reflection Data and Conceptual Models for Geothermal Development in  

Open Energy Info (EERE)

Seismic Reflection Data and Conceptual Models for Geothermal Development in Seismic Reflection Data and Conceptual Models for Geothermal Development in Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Seismic Reflection Data and Conceptual Models for Geothermal Development in Nevada Abstract Seismic reflection data were collected in two geothermalareas in Nevada to support geologic structural models andgeothermal well targeting. The data were integrated withsurface mapping, well results, and other geophysical data inconceptual geologic models in both areas. Faults wereinterpreted from reflection data based on reflector offsetsand apparent fault surface reflectors dipping away from therange front. Interpreted faults at Blue Mt., where severalwells have been drilled, correlated with well entries.Subsequent well targeting based on the conceptualstructural model

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Conceptual Modeling of Data Intensive and Information Intensive Web Applications  

Science Conference Proceedings (OSTI)

Online services can be difficult to conceive and to managedue to their inherent complexity, involving many subjectswith distinct goals (user, managers, public and privateagencies, ...), often regulated by complex norms andprocedures; moreover, they are ... Keywords: Web Site modeling and Design, e-Government, Data Model,Conceptual modeling

Mario Bochicchio; Antonella Longo

2004-01-01T23:59:59.000Z

22

Conceptual adsorption models and open issues pertaining to performance assessment  

SciTech Connect

Recently several articles have been published that question the appropriateness of the distribution coefficient, Rd, concept to quantify radionuclide migration. Several distinct issues are raised by various critics. In this paper I provide some perspective on issues surrounding the modeling of nuclide retardation. The first section defines adsorption terminology and discusses various adsorption processes. The next section describes five commonly used adsorption conceptual models, specifically emphasizing what attributes that affect adsorption are explicitly accommodated in each model. I also review efforts to incorporate each adsorption model into performance assessment transport computer codes. The five adsorption conceptual models are (1) the constant Rd model, (2) the parametric Rd model, (3) isotherm adsorption models, (4) mass-action adsorption models, and (5) surface-complexation with electrostatics models. The final section discusses the adequacy of the distribution ratio concept, the adequacy of transport calculations that rely on constant retardation factors and the status of incorporating sophisticated adsorption models into transport codes.

Serne, R.J.

1991-10-01T23:59:59.000Z

23

Conceptual Model At Coso Geothermal Area (1980) | Open Energy Information  

Open Energy Info (EERE)

Conceptual Model At Coso Geothermal Area (1980) Conceptual Model At Coso Geothermal Area (1980) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Conceptual Model Activity Date 1980 Usefulness not indicated DOE-funding Unknown Exploration Basis 1) Estimate thermal regime and thermal potential of the system. 2) Use field mapping to develop a model of the reservoir system. Notes 1) The seismograms of 44 events recorded by the telemetered array and nine events by the Centipede array were analyzed using the reduced spectral ratio technique to determine the differential attenuation factor delta t* for the events recorded with the highest signal-to-noise ratio. 2) Arcuate faults in the Coso Range are interpreted to have been produced by the regional stress field rather than to have been of volcanogenic origin.

24

Geothermal Resource Conceptual Models Using Surface Exploration Data | Open  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Geothermal Resource Conceptual Models Using Surface Exploration Data Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Resource Conceptual Models Using Surface Exploration Data Abstract The most important element of an analysis to target a geothermal well or assess resource capacity is a resource conceptual model consistent with the available information. A common alternative approach to both targeting and assessment is to focus on a data anomaly or, in some cases, several stacked anomalies. However, even stacked anomalies are commonly misleading without

25

Surficial Extent And Conceptual Model Of Hydrothermal System At Mount  

Open Energy Info (EERE)

Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Rainier, Washington Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Surficial Extent And Conceptual Model Of Hydrothermal System At Mount Rainier, Washington Details Activities (4) Areas (2) Regions (0) Abstract: A once massive hydrothermal system was disgorged from the summit of Mount Rainier in a highly destructive manner about 5000 years ago. Today, hydrothermal processes are depositing clayey alteration products that have the potential to reset the stage for similar events in the future. Areas of active hydrothermal alteration occur in three representative settings: 1. (1) An extensive area (greater than 12,000 m2) of heated ground and slightly acidic boiling-point fumaroles at 76-82°C at

26

Conceptual Modeling in Disaster Planning Using Agent Constructs  

Science Conference Proceedings (OSTI)

A disaster plan contains rules to be used by responders to deal with a disaster and save lives. Usually, the plan is not enacted by those who created it. This results in difficulty for responders in utilizating the plan. Conceptual models have been used ... Keywords: Disaster Management, Intelligent Agent, Modeling Grammar

Kafui Monu; Carson Woo

2009-11-01T23:59:59.000Z

27

Conceptual design statement of work for the immobilized low-activity waste interim storage facility project  

SciTech Connect

The Immobilized Low-Activity Waste Interim Storage subproject will provide storage capacity for immobilized low-activity waste product sold to the U.S. Department of Energy by the privatization contractor. This statement of work describes the work scope (encompassing definition of new installations and retrofit modifications to four existing grout vaults), to be performed by the Architect-Engineer, in preparation of a conceptual design for the Immobilized Low-Activity Waste Interim Storage Facility.

Carlson, T.A., Fluor Daniel Hanford

1997-02-06T23:59:59.000Z

28

Hierarchical causal conceptual physical models - Springer  

Science Conference Proceedings (OSTI)

nomena like the ENSO, variation of monsoon in the Indian subcontinent, etc. For a clear presentation of systems modeling methods and purpose see Flood and ...

29

Conceptual Model At Coso Geothermal Area (2006) | Open Energy Information  

Open Energy Info (EERE)

6) 6) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Conceptual Model Activity Date 2006 Usefulness useful DOE-funding Unknown Exploration Basis Determine boiling zones and their relation to production zones by developing a fluid model Notes A fluid model for the Coso geothermal reservoir is developed from Fluid Inclusion Stratigraphy (FIS) analyses. Fluid inclusion gas chemistry in well cuttings collected at 20 ft intervals is analyzed and plotted on well log diagrams. Models are created using cross-sections and fence diagrams. References Dilley, L.M.; Norman, D.I.; Moore, J.; McCullouch, J. (1 January 2006) FLUID STRATIGRAPHY OF THE COSO GEOTHERMAL RESERVOIR Retrieved from "http://en.openei.org/w/index.php?title=Conceptual_Model_At_Coso_Geothermal_Area_(2006)&oldid=473688

30

A model-driven choreography conceptual framework  

Science Conference Proceedings (OSTI)

A number of languages exist that try to model the external visible behavior of services. However, they constitute incomplete solutions, either because, they do not include proper support for semantics, they have a lack of technological independence, ... Keywords: Choreography, MEP, SOA, Semantic Services

Sinuhe Arroyo; Alistair Duke; José-Manuel López-Cobo; Miguel-Angel Sicilia

2007-03-01T23:59:59.000Z

31

Conceptual Model At Raft River Geothermal Area (1976) | Open Energy  

Open Energy Info (EERE)

6) 6) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1976 Usefulness not indicated DOE-funding Unknown Exploration Basis Determine productive zones in the reservoir Notes Borehole geophysics techniques were used in evaluating the Raft River geothermal reservoir to establish a viable model for the system. The assumed model for the hot water 1450C reservoir was a zone of higher conductivity, increased porosity, decreased density, and lower sonic velocity. References Applegate, J.K.; Donaldson, P.R.; Kinkley, D.L.; Wallace, T.L. (1 January 1976) Borehole geophysics evaluation of the Raft River geothermal reservoir Retrieved from "http://en.openei.org/w/index.php?title=Conceptual_Model_At_Raft_River_Geothermal_Area_(1976)&oldid=473821

32

Conceptual Model At Raft River Geothermal Area (1977) | Open Energy  

Open Energy Info (EERE)

) ) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1977 Usefulness not indicated DOE-funding Unknown Exploration Basis Determine time to cool the geothermal field with reinjection Notes If reinjection and production wells intersect connected fractures, it is expected that reinjected fluid would cool the production well much sooner than would be predicted from calculations of flow in a porous medium. A method for calculating how much sooner that cooling will occur was developed. References Kasameyer, P. W.; Schroeder, R. C. (1 January 1977) Application of thermal depletion model to geothermal reservoirs with fracture and pore permeability Retrieved from "http://en.openei.org/w/index.php?title=Conceptual_Model_At_Raft_River_Geothermal_Area_(1977)&oldid=473822

33

Elevated Mixed Layers in the Regional Severe Storm Environment: Conceptual Model and Case Studies  

Science Conference Proceedings (OSTI)

A conceptual model of the evolution of the severe local storm environment is discussed in conjunction with three case studies drawn from data obtained during the 1979 SESAME field program. The conceptual model describes how a particular ...

T. N. Carlson; S. G. Benjamin; G. S. Forbes; Y-F. Li

1983-07-01T23:59:59.000Z

34

Conceptual Model At Coso Geothermal Area (2005) | Open Energy Information  

Open Energy Info (EERE)

Coso Geothermal Area (2005) Coso Geothermal Area (2005) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Conceptual Model Activity Date 2005 Usefulness not indicated DOE-funding Unknown Exploration Basis Develop a conceptual model of the Coso area Notes Investigation of the Coso Range using seismicity, gravity, and geochemistry of rocks and fluids, supports the interpretation that the structure hosting the geothermal resource is a nascent metamorphic core complex. The structural setting is a releasing bend in a dextral strike-slip system that extends from the Indian Wells Valley northward into the Owens Valley. This tectonic setting results in NW-directed transtension, which is accommodated by normal and strike-slip faulting of the brittle upper 4-6 km of the

35

Conceptual Model At Salton Sea Geothermal Area (1977) | Open Energy  

Open Energy Info (EERE)

Geothermal Area (1977) Geothermal Area (1977) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Salton Sea Geothermal Area (1977) Exploration Activity Details Location Salton Sea Geothermal Area Exploration Technique Conceptual Model Activity Date 1977 Usefulness not indicated DOE-funding Unknown Exploration Basis Determine time to cool the geothermal field with reinjection Notes If reinjection and production wells intersect connected fractures, it is expected that reinjected fluid would cool the production well much sooner than would be predicted from calculations of flow in a porous medium. A method for calculating how much sooner that cooling will occur was developed. References Kasameyer, P. W.; Schroeder, R. C. (1 January 1977) Application

36

Conceptual Model At Raft River Geothermal Area (1980) | Open Energy  

Open Energy Info (EERE)

0) 0) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1980 Usefulness not indicated DOE-funding Unknown Exploration Basis Determine the relevant data necessary to assess a geothermal reservoir in similar rock types and use cross plots to potentially define the producing zones. Notes A conceptual model was developed that uses all geophysical data that has been collected on the area to determine the rock types and reasonable values of the parameters of interest. Emphasis has been on developing a simple interpretation scheme from a minimum of data sets. However, the cross plotting of various parameters has allowed a determination of rock types and an analysis of the degree of alteration and the density of

37

Conceptual model of the Klamath Falls, Oregon geothermal area  

DOE Green Energy (OSTI)

Over the last 50 years significant amounts of data have been obtained from the Klamath Falls geothermal resource. To date, the complexity of the system has stymied researchers, leading to the development of only very generalized hydrogeologic and geothermal models of the area. Recently, the large quantity of available temperature data have been re-evaluated, revealing new information on subsurface heat flow and locations of faults in the system. These inferences are supported by borehole, geochemical, geophysical, and hydrologic data. Based on re-evaluation of all available data, a detailed conceptual model for the Klamath Falls geothermal resource is proposed.

Prucha, R.H.; Benson, S.M.; Witherspoon, P.A.

1987-01-01T23:59:59.000Z

38

A geometric modelling framework for conceptual structural design from early digital architectural models  

Science Conference Proceedings (OSTI)

Computer support for conceptual structural design is still ineffective. This is due, in part, to the fact that current computer applications do not recognize that structural design and architectural design are highly interdependent processes, particularly ... Keywords: Architectural design, Conceptual structural design, Geometric modeling, Integrated design

Rodrigo Mora; Claude Bédard; Hugues Rivard

2008-04-01T23:59:59.000Z

39

Updated Conceptual Model for the 300 Area Uranium Groundwater Plume  

SciTech Connect

The 300 Area uranium groundwater plume in the 300-FF-5 Operable Unit is residual from past discharge of nuclear fuel fabrication wastes to a number of liquid (and solid) disposal sites. The source zones in the disposal sites were remediated by excavation and backfilled to grade, but sorbed uranium remains in deeper, unexcavated vadose zone sediments. In spite of source term removal, the groundwater plume has shown remarkable persistence, with concentrations exceeding the drinking water standard over an area of approximately 1 km2. The plume resides within a coupled vadose zone, groundwater, river zone system of immense complexity and scale. Interactions between geologic structure, the hydrologic system driven by the Columbia River, groundwater-river exchange points, and the geochemistry of uranium contribute to persistence of the plume. The U.S. Department of Energy (DOE) recently completed a Remedial Investigation/Feasibility Study (RI/FS) to document characterization of the 300 Area uranium plume and plan for beginning to implement proposed remedial actions. As part of the RI/FS document, a conceptual model was developed that integrates knowledge of the hydrogeologic and geochemical properties of the 300 Area and controlling processes to yield an understanding of how the system behaves and the variables that control it. Recent results from the Hanford Integrated Field Research Challenge site and the Subsurface Biogeochemistry Scientific Focus Area Project funded by the DOE Office of Science were used to update the conceptual model and provide an assessment of key factors controlling plume persistence.

Zachara, John M.; Freshley, Mark D.; Last, George V.; Peterson, Robert E.; Bjornstad, Bruce N.

2012-11-01T23:59:59.000Z

40

An Updated Conceptual Model Of The Los Humeros Geothermal Reservoir  

Open Energy Info (EERE)

Humeros Geothermal Reservoir Humeros Geothermal Reservoir (Mexico) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: An Updated Conceptual Model Of The Los Humeros Geothermal Reservoir (Mexico) Details Activities (0) Areas (0) Regions (0) Abstract: An analysis of production and reservoir engineering data of 42 wells from the Los Humeros geothermal field (Mexico) allowed obtaining the pressure and temperature profiles for the unperturbed reservoir fluids and developing 1-D and 2-D models for the reservoir. Results showed the existence of at least two reservoirs in the system: a relatively shallow liquid-dominant reservoir located between 1025 and 1600 m above sea level (a.s.l.) the pressure profile of which corresponds to a 300-330°C boiling water column and a deeper low-liquid-saturation reservoir located between

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Conceptual Model At Raft River Geothermal Area (1987) | Open Energy  

Open Energy Info (EERE)

Exploration Activity Details Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 1987 Usefulness not indicated DOE-funding Unknown Exploration Basis To model the kinematics of compressional and extensional ductile shearing deformation Notes Analysis of shear criteria enables the kinematics of two main ductile-shearing events (D1 and D2) to be established in the Raft River, Grouse Creek and Albion 'metamorphic core complex'. The first event (D1) is a NNE-thrusting and corresponds to Mesozoic shortening. A well developed non-coaxial ductile deformation (D2), of Cenozoic age, is marked by the occurrence of opposing eastward (in Raft River) and westward shear criteria (in Albion-Grouse Creek). These characterize an arch structure

42

Conceptual Model At Raft River Geothermal Area (2011) | Open Energy  

Open Energy Info (EERE)

2011) 2011) Exploration Activity Details Location Raft River Geothermal Area Exploration Technique Conceptual Model Activity Date 2011 Usefulness not indicated DOE-funding Unknown Exploration Basis Explore for development of an EGS demonstration project Notes The reservoir is developed in fractured Proterozoic schist and quartzite, and Archean quartz monzonite cut by younger diabase intrusions. The basement complex was deformed during the mid Tertiary and covered by approximately 5000 ft of late Tertiary sedimentary and volcanic deposits. Listric normal faults of Cenozoic age disrupt the Tertiary deposits but do not offset the basement rocks. RRG-9, the target well, was drilled southwest of the main well field to a measured depth (MD) of 6089 ft. The well is deviated to the west and cased to a depth of 2316 ft MD. It

43

Visualization and Modeling Working Group  

Science Conference Proceedings (OSTI)

During the 2005 Hurricane season, many consequence predictions were available from 36 to 96 hours before landfalls, via the Department of Energy’s Visualization and Modeling Working Group (VMWG). Real-time data can be tapped by local officials and utilities, and can also be accessed for post-event regulatory audits. An overview of VMWG’s models, results and uses will be presented.

Fernandez, S.J. (LANL); Dodrill, K.A.

2007-03-01T23:59:59.000Z

44

-1 -Conservation Activity Conceptual Models June 2008.doc CCF Measures of Conservation Success  

E-Print Network (OSTI)

- 1 -Conservation Activity Conceptual Models June 2008.doc CCF Measures of Conservation Success Conservation Activity Conceptual Models These models are flowchart-style representations of the generic processes by which different types of conservation activity can lead to conservation effects. The components

Foster, William A.

45

Object-Oriented Modeling --1 2004 John Mylopoulos Conceptual Modeling CSC2507  

E-Print Network (OSTI)

Object-Oriented Modeling -- 1 2004 John Mylopoulos Conceptual Modeling CSC2507 Object-Oriented Analysis TechniquesObject-Oriented Analysis Techniques CoadCoad''ss OOA TechniqueOOA Technique Short HistoryShort History Terminological ComparisonTerminological Comparison RemarksRemarks V. Object-Oriented

Mylopoulos, John

46

A water utility industry conceptual asset management data warehouse model  

E-Print Network (OSTI)

Timely decision making is critical in today’s competitive business world and in recent times, data warehousing has been employed by numerous companies to satisfy the needs of accurate and timely information. Data warehousing has traditionally been employed for financial and customer relationship analysis with current applications now moving to other domains, such as the medical and power industries. The asset management industry is one that has seen great strides in recent years due to improved technology, but data warehousing of asset management information has been lacking. A literature review was undertaken to determine data warehousing applications in the area of asset management, and with the lessons learned, a conceptual model of data warehousing for asset management is proposed. The water utility industry is chosen to provide a grounded example of an enterprise data warehouse model that integrates data from various local information systems. The particular issues faced in the asset management domain are highlighted, and several water utility applications are presented. KEY WORDS: data warehousing, asset management, water utility industry, design 1.

Avin Mathew; Sheng Zhang; Lin Ma; Doug Hargreaves

2006-01-01T23:59:59.000Z

47

Geology And A Working Conceptual Model Of The Obsidian Butte...  

Open Energy Info (EERE)

interconnected, mineralized fractures (veinlets). This stockwork probably formed by hydraulic rock rupture induced by explosion of isolated, fluid-filled pores heated and...

48

A Conceptual Model of the Surface Salinity Distribution in the Oceanic Hadley Cell  

Science Conference Proceedings (OSTI)

A conceptual model of the salinity distribution in the oceanic Hadley cell is presented. The model pertains to the region of tropical easterly surface winds, where the surface salinity increases poleward from a local salinity minimum near the ...

Johan Nilsson; Heiner Körnich

2008-12-01T23:59:59.000Z

49

Conceptual geologic model and native state model of the Roosevelt Hot Springs hydrothermal system  

DOE Green Energy (OSTI)

A conceptual geologic model of the Roosevelt Hot Springs hydrothermal system was developed by a review of the available literature. The hydrothermal system consists of a meteoric recharge area in the Mineral Mountains, fluid circulation paths to depth, a heat source, and an outflow plume. A conceptual model based on the available data can be simulated in the native state using parameters that fall within observed ranges. The model temperatures, recharge rates, and fluid travel times are sensitive to the permeability in the Mineral Mountains. The simulation results suggests the presence of a magma chamber at depth as the likely heat source. A two-dimensional study of the hydrothermal system can be used to establish boundary conditions for further study of the geothermal reservoir.

Faulder, D.D.

1991-01-01T23:59:59.000Z

50

Conceptual geologic model and native state model of the Roosevelt Hot Springs hydrothermal system  

DOE Green Energy (OSTI)

A conceptual geologic model of the Roosevelt Hot Springs hydrothermal system was developed by a review of the available literature. The hydrothermal system consists of a meteoric recharge area in the Mineral Mountains, fluid circulation paths to depth, a heat source, and an outflow plume. A conceptual model based on the available data can be simulated in the native state using parameters that fall within observed ranges. The model temperatures, recharge rates, and fluid travel times are sensitive to the permeability in the Mineral Mountains. The simulation results suggests the presence of a magma chamber at depth as the likely heat source. A two-dimensional study of the hydrothermal system can be used to establish boundary conditions for further study of the geothermal reservoir. 33 refs., 9 figs.

Faulder, D.D.

1991-01-01T23:59:59.000Z

51

The Interaction of Katabatic Flow and Mountain Waves. Part II: Case Study Analysis and Conceptual Model  

Science Conference Proceedings (OSTI)

Via numerical analysis of detailed simulations of an early September 1993 case night, the authors develop a conceptual model of the interaction of katabatic flow in the nocturnal boundary layer with mountain waves (MKI). A companion paper (Part I)...

Gregory S. Poulos; James E. Bossert; Thomas B. McKee; Roger A. Pielke Sr.

2007-06-01T23:59:59.000Z

52

Influence of Recent Stratification Changes on ENSO Stability in a Conceptual Model of the Equatorial Pacific  

Science Conference Proceedings (OSTI)

Changes in the mean circulation of the equatorial Pacific Ocean partly control the strong decadal modulation of El Niño–Southern Oscillation (ENSO). This relationship is considered from the linear stability of a conceptual recharge/discharge model ...

Sulian Thual; Boris Dewitte; Soon-Il An; Serena Illig; Nadia Ayoub

2013-07-01T23:59:59.000Z

53

Conceptual Model At Salt Wells Area (Faulds, Et Al., 2011) | Open Energy  

Open Energy Info (EERE)

Conceptual Model At Salt Wells Area (Faulds, Et Al., 2011) Conceptual Model At Salt Wells Area (Faulds, Et Al., 2011) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Salt Wells Area (Faulds, Et Al., 2011) Exploration Activity Details Location Salt Wells Geothermal Area Exploration Technique Conceptual Model Activity Date 2011 Usefulness useful regional reconnaissance DOE-funding ARRA (American Recovery and Reinvestment Act) Exploration Basis The paper reports on the first phase of a three-stage DOE-ARRA (American Recovery and Reinvestment Act)-funded study that integrates knowledge of favorable structural settings in the Great Basin region with the goal of developing a structural catalogue that can be used to refine exploration strategies for geothermal resources (particularly for blind/hidden systems)

54

From systems biology to photosynthesis and whole-plant modeling: a conceptual model for integrating multi-scale networks  

SciTech Connect

Network analysis is now a common statistical tool for molecular biologists. Network algorithms are readily used to model gene, protein and metabolic correlations providing insight into pathways driving biological phenomenon. One output from such an analysis is a candidate gene list that can be responsible, in part, for the biological process of interest. The question remains, however, as to whether molecular network analysis can be used to inform process models at higher levels of biological organization. In our previous work, transcriptional networks derived from three plant species were constructed, interrogated for orthology and then correlated to photosynthetic inhibition at elevated temperature. One unique aspect of that study was the link from co-expression networks to net photosynthesis. In this addendum, we propose a conceptual model where traditional network analysis can be linked to whole-plant models thereby informing predictions on key processes such as photosynthesis, nutrient uptake and assimilation, and C partitioning.

Weston, David [ORNL; Hanson, Paul J [ORNL; Norby, Richard J [ORNL; Tuskan, Gerald A [ORNL; Wullschleger, Stan D [ORNL

2012-01-01T23:59:59.000Z

55

Do Box Inverse Models Work?  

Science Conference Proceedings (OSTI)

The performance of a box inverse model is tested using output from a near-eddy-resolving numerical model. Conservation equations are written in isopycnal layers for three properties: mass, heat, and salt anomaly. If the equations are free of ...

Peter C. McIntosh; Stephen R. Rintoul

1997-02-01T23:59:59.000Z

56

Mathematical models towards self-organizing formal federation languages based on conceptual models of information exchange capabilities  

Science Conference Proceedings (OSTI)

Conceptual models capture information that is crucial for composability of legacy solutions that is not formally captured in the derived technical artifacts. It is necessary to make this information available for the selection (or elimination) of available ...

Andreas Tolk; Saikou Y Diallo; Charles D Turnitsa

2008-12-01T23:59:59.000Z

57

Statement of work for conceptual design of solidified high-level waste interim storage system project (phase I)  

SciTech Connect

The U.S. Department of Energy (DOE) has embarked upon a course to acquire Hanford Site tank waste treatment and immobilization services using privatized facilities. This plan contains a two phased approach. Phase I is a ``proof-of-principle/commercial demonstration- scale`` effort and Phase II is a full-scale production effort. In accordance with the planned approach, interim storage (IS) and disposal of various products from privatized facilities are to be DOE furnished. The path forward adopted for Phase I solidification HLW IS entails use of Vaults 2 and 3 in the Spent Nuclear Fuel Canister Storage Building, to be located in the Hanford Site 200 East Area. This Statement of Work describes the work scope to be performed by the Architect-Engineer to prepare a conceptual design for the solidified HLW IS System.

Calmus, R.B., Westinghouse Hanford

1996-12-17T23:59:59.000Z

58

Conceptual design of an integrated technology model for carbon policy assessment.  

SciTech Connect

This report describes the conceptual design of a technology choice model for understanding strategies to reduce carbon intensity in the electricity sector. The report considers the major modeling issues affecting technology policy assessment and defines an implementable model construct. Further, the report delineates the basis causal structure of such a model and attempts to establish the technical/algorithmic viability of pursuing model development along with the associated analyses.

Backus, George A.; Dimotakes, Paul E. (NASA Jet Propulsion Laboratory, Pasadena, CA)

2011-01-01T23:59:59.000Z

59

Conceptual Model of Offshore Wind Environmental Risk Evaluation System  

SciTech Connect

In this report we describe the development of the Environmental Risk Evaluation System (ERES), a risk-informed analytical process for estimating the environmental risks associated with the construction and operation of offshore wind energy generation projects. The development of ERES for offshore wind is closely allied to a concurrent process undertaken to examine environmental effects of marine and hydrokinetic (MHK) energy generation, although specific risk-relevant attributes will differ between the MHK and offshore wind domains. During FY10, a conceptual design of ERES for offshore wind will be developed. The offshore wind ERES mockup described in this report will provide a preview of the functionality of a fully developed risk evaluation system that will use risk assessment techniques to determine priority stressors on aquatic organisms and environments from specific technology aspects, identify key uncertainties underlying high-risk issues, compile a wide-range of data types in an innovative and flexible data organizing scheme, and inform planning and decision processes with a transparent and technically robust decision-support tool. A fully functional version of ERES for offshore wind will be developed in a subsequent phase of the project.

Anderson, Richard M.; Copping, Andrea E.; Van Cleve, Frances B.; Unwin, Stephen D.; Hamilton, Erin L.

2010-06-01T23:59:59.000Z

60

An independent verification and validation of the Future Theater Level Model conceptual model  

Science Conference Proceedings (OSTI)

This report describes the methodology and results of independent verification and validation performed on a combat model in its design stage. The combat model is the Future Theater Level Model (FTLM), under development by The Joint Staff/J-8. J-8 has undertaken its development to provide an analysis tool that addresses the uncertainties of combat more directly than previous models and yields more rapid study results. The methodology adopted for this verification and validation consisted of document analyses. Included were detailed examination of the FTLM design documents (at all stages of development), the FTLM Mission Needs Statement, and selected documentation for other theater level combat models. These documents were compared to assess the FTLM as to its design stage, its purpose as an analytical combat model, and its capabilities as specified in the Mission Needs Statement. The conceptual design passed those tests. The recommendations included specific modifications as well as a recommendation for continued development. The methodology is significant because independent verification and validation have not been previously reported as being performed on a combat model in its design stage. The results are significant because The Joint Staff/J-8 will be using the recommendations from this study in determining whether to proceed with develop of the model.

Hartley, D.S. III; Kruse, K.L.; Martellaro, A.J.; Packard, S.L.; Thomas, B. Jr.; Turley, V.K.

1994-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Sensitivity of ENSO to Stratification in a Recharge–Discharge Conceptual Model  

Science Conference Proceedings (OSTI)

El Niño–Southern Oscillation (ENSO) is driven by large-scale ocean–atmosphere interactions in the equatorial Pacific and is sensitive to change in the mean state. Whereas conceptual models of ENSO usually consider the depth of the thermocline to ...

Sulian Thual; Boris Dewitte; Soon-Il An; Nadia Ayoub

2011-08-01T23:59:59.000Z

62

Eliciting fuzzy distributions from experts for ranking conceptual risk model components  

Science Conference Proceedings (OSTI)

An expert elicitation methodology was developed to integrate scientific knowledge from many studies at different spatial and temporal scales. The methodology utilised a structured one-to-one interview to elicit scale-dependent conceptual models and expert-weightings ... Keywords: Elicitation, Expert opinion, Fuzzy number, Phosphorus, Uncertainty, Water framework directive

T. Page; A. L. Heathwaite; L. J. Thompson; L. Pope; R. Willows

2012-10-01T23:59:59.000Z

63

Towards an accurate functional size measurement procedure for conceptual models in an MDA environment  

Science Conference Proceedings (OSTI)

The accurate measurement of the functional size of applications that are automatically generated in MDA environments is a challenge for the software development industry. This paper introduces the OO-Method COSMIC Function Points (OOmCFP) procedure, ... Keywords: COSMIC, Conceptual modeling, Functional size measurement, MDA, Object orientation

Beatriz Marín; Oscar Pastor; Alain Abran

2010-05-01T23:59:59.000Z

64

Diabatic Effects on Late-Winter Cold Front Evolution: Conceptual and Numerical Model Evaluations  

Science Conference Proceedings (OSTI)

The impact of diabatic heating on late winter frontogenesis is evaluated both through conceptual scaling and the use of high-resolution Eta Model simulations of a strong but relatively dry cold surface front that occurred during the Storm-scale ...

William A. Gallus Jr.; Moti Segal

1999-07-01T23:59:59.000Z

65

Fog Forecasting for the Southern Region: A Conceptual Model Approach  

Science Conference Proceedings (OSTI)

The prediction of fog occurrence, extent, duration, and intensity remains difficult despite improvements in numerical guidance and modeling of the fog phenomenon. This is because of the dependency of fog on microphysical and mesoscale processes ...

Paul J. Croft; Russell L. Pfost; Jeffrey M. Medlin; G. Alan Johnson

1997-09-01T23:59:59.000Z

66

Finite automata models of quantized systems: conceptual status and outlook  

E-Print Network (OSTI)

Since Edward Moore, finite automata theory has been inspired by physics, in particular by quantum complementarity. We review automaton complementarity, reversible automata and the connections to generalized urn models. Recent developments in quantum information theory may have appropriate formalizations in the automaton context.

Karl Svozil

2002-09-15T23:59:59.000Z

67

Conceptual Model At Coso Geothermal Area (2005-2007) | Open Energy  

Open Energy Info (EERE)

7) 7) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Coso Geothermal Area (2005-2007) Exploration Activity Details Location Coso Geothermal Area Exploration Technique Conceptual Model Activity Date 2005 - 2007 Usefulness useful DOE-funding Unknown Exploration Basis Determine most productive areas of geothermal field using stress and faulting analysis to develop a geomechanical model Notes New geologic mapping and measurements of stress orientations and magnitudes from wells 34-9RD2 and 58A-10 were integrated with existing data sets to refine a geomechanical model for the Coso geothermal field. Vertically averaged stress orientations across the field are fairly uniform and are consistent with focal mechanism inversions of earthquake clusters for

68

Advanced Conceptual Models for Unsaturated and Two-Phase Flow in Fractured Rock  

DOE Green Energy (OSTI)

This project was initiated in FY03. As of December 2003, we have accomplished the following: (1) We conducted a more detailed evaluation of the preliminary experiments used to develop our investigative approach. In those experiments, water was invaded at a variety of flow rates into an air-filled, two dimensional analog fracture network. Results demonstrated the critical control that fracture intersections place on two-phase flow in fracture networks. At low flows, capillary and gravitational forces combined to create a narrow pulsing flow structure that spanned the system vertically. At higher flows, viscous forces acted to remove the pulsation; however, the flow structure remained narrow. The intersections acted to impose a narrow ''slender ladder'' structure on the flowing phase that did not expand with depth, but instead remained focused. A manuscript documenting this effort has been published in Water Resources Research [Glass et al., 2003a]. (2) We initiated a collaborative relationship with a research group at Seoul National University. This group, which is led by Dr. Kang-Kun Lee is also using a combined experimental numerical approach to consider DNAPL migration in fracture networks. They are particularly interested in the influence of ambient groundwater flows, making their work complementary to ours. The first fruit of that collaboration is an article demonstrating that modification of an Invasion Percolation algorithm to include gravity and the first-order effects of viscous forces shows good agreement with physical experiments in a simplistic fracture network. Results were published in Geophysical Research Letters [Ji et al., 2003a]. (3) We carried out an extensive review of models for fracture networks. These include models developed from observations of networks on outcrops at several scales and stochastic models that are prevalent in the literature from the 1980s to very recent developments. The results of this review were included as par t of a review paper co-authored by Rajaram, which was submitted to Reviews in Geophysics [Molz et al., in press]. (4) We prepared a manuscript based on previous work that will be used to support the development of our new conceptual model(s) for transport in fractured rock. Eight experiments were conducted to evaluate the repeatability of flow under nearly identical conditions and to characterize general patterns in flow behavior. Collected data revealed that flow generally converged to a single fracture in the bottom row of blocks. Periods of pathway switching were observed to be more common than periods with steady, constant flow pathways. We noted the importance of fracture intersections for integrating uniform flow and discharging a ''fluid cascade'', where water advances rapidly to the next capillary barrier creating a stop and start advance of water through the network. The results of this simple experiment suggest that the interaction of multiple fracture intersections in a network creates flow behavior not generally recognized in popular conceptual and numerical models. A manuscript documenting this effort has been accepted for publication in Vadose Zone Journal [Wood et al., 2003]. (5) Slender transport pathways have been found in laboratory and field experiments within unsaturated fractured rock. We considered the simulation of such structures with a Modified form of Invasion Percolation (MIP). Results show that slender pathways form in fracture networks for a wide range of expected conditions, can be maintained when subsequent matrix imbibition is imposed, and may arise even in the context of primarily matrix flow due to the action of fractures as barriers to inter-matrix block transport. A manuscript documenting this effort has been submitted to Geophysical Research Letters [Glass et al., 2003b].

Rajaram, Harihar

2003-06-01T23:59:59.000Z

69

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Conceptual Safety Design (CSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Conceptual Safety Design work, processes and...

70

A Stochastic Conceptual Modeling Approach for Examining the Effects of Climate Change on Streamflows in Mountain Basins  

Science Conference Proceedings (OSTI)

This study presents a modeling approach for examining how changes in climate affect streamflow in mesoscale mountain basins dominated by snowmelt runoff. A conceptual snowmelt-runoff model was developed that is forced by daily time series of ...

Peter R. Furey; Stephanie K. Kampf; Jordan S. Lanini; Andre Q. Dozier

2012-06-01T23:59:59.000Z

71

Evolution of the conceptual model of unsaturated zone hydrology at yucca mountain, nevada  

SciTech Connect

Yucca Mountain is an arid site proposed for consideration as the United States' first underground high-level radioactive waste repository. Low rainfall (approximately 170 mm/yr) and a thick unsaturated zone (500-1000 m) are important physical attributes of the site because the quantity of water likely to reach the waste and the paths and rates of movement of the water to the saturated zone under future climates would be major factors in controlling the concentrations and times of arrival of radionuclides at the surrounding accessible environment. The framework for understanding the hydrologic processes that occur at this site and that control how quickly water will penetrate through the unsaturated zone to the water table has evolved during the past 15 yr. Early conceptual models assumed that very small volumes of water infiltrated into the bedrock (0.5-4.5 mm/yr, or 2-3 percent of rainfall), that much of the infiltrated water flowed laterally within the upper nonwelded units because o f capillary barrier effects, and that the remaining water flowed down faults with a small amount flowing through the matrix of the lower welded, fractured rocks. It was believed that the matrix had to be saturated for fractures to show. However, accumulating evidence indicated that infiltration rates were higher than initially estimated, such as infiltration modeling based on neutron borehole data, bomb-pulse isotopes deep in the mountain, perched water analyses and thermal analyses. Mechanisms supporting lateral diversion did not apply at these higher fluxes, and the flux calculated in the lower welded unit exceeded the conductivity of the matrix, implying vertical flow of water into the high permeability fractures of the potential repository host rock, and disequilibrium between matrix and fracture water potentials. The development of numerical modeling methods and parameter values evolved concurrently with the conceptual model in order to account for the observed field data, particularly fracture flow deep in the unsaturated zone. This paper presents the history of the evolution of conceptual models of hydrology and numerical models of unsaturated zone flow at Yucca Mountain, Nevada (Flint, A.L., Flint, L.E., Kwicklis, E.M., Bodvarsson, G.S., Fabryka-Martin, J.M., 2001. Hydrology of Yucca Mountain. Reviews of Geophysics in press). This retrospective is the basis for recommendations for optimizing the efficiency with which a viable and robust conceptual model can be developed for a complex site. (C) 2001 Elsevier Science B.V. All rights reserved. [References: 87

Flint, A. L.; Flint, L. E.; Bodvarsson, G. S.; Kwicklis, E. M.; Fabryka-Martin, J.

2001-02-01T23:59:59.000Z

72

Description and evaluation of a mechanistically based conceptual model for spall  

Science Conference Proceedings (OSTI)

A mechanistically based model for a possible spall event at the WIPP site is developed and evaluated in this report. Release of waste material to the surface during an inadvertent borehole intrusion is possible if future states of the repository include high gas pressure and waste material consisting of fine particulates having low mechanical strength. The conceptual model incorporates the physics of wellbore hydraulics coupled to transient gas flow to the intrusion borehole, and mechanical response of the waste. Degraded waste properties using of the model. The evaluations include both numerical and analytical implementations of the conceptual model. A tensile failure criterion is assumed appropriate for calculation of volumes of waste experiencing fragmentation. Calculations show that for repository gas pressures less than 12 MPa, no tensile failure occurs. Minimal volumes of material experience failure below gas pressure of 14 MPa. Repository conditions dictate that the probability of gas pressures exceeding 14 MPa is approximately 1%. For these conditions, a maximum failed volume of 0.25 m{sup 3} is calculated.

Hansen, F.D.; Knowles, M.K.; Thompson, T.W. [and others

1997-08-01T23:59:59.000Z

73

Conceptual model for regional radionuclide transport from a salt dome repository: a technical memorandum  

Science Conference Proceedings (OSTI)

Disposal of high-level radioactive wastes is a major environmental problem influencing further development of nuclear energy in this country. Salt domes in the Gulf Coast Basin are being investigated as repository sites. A major concern is geologic and hydrologic stability of candidate domes and potential transport of radionuclides by groundwater to the biosphere prior to their degradation to harmless levels of activity. This report conceptualizes a regional geohydrologic model for transport of radionuclides from a salt dome repository. The model considers transport pathways and the physical and chemical changes that would occur through time prior to the radionuclides reaching the biosphere. Necessary, but unknown inputs to the regional model involve entry and movement of fluids through the repository dome and across the dome-country rock interface and the effect on the dome and surrounding strata of heat generated by the radioactive wastes.

Kier, R.S.; Showalter, P.A.; Dettinger, M.D.

1980-05-30T23:59:59.000Z

74

An Updated Conceptual Model Of The Travale Geothermal Field Based On Recent  

Open Energy Info (EERE)

Travale Geothermal Field Based On Recent Travale Geothermal Field Based On Recent Geophysical And Drilling Data Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: An Updated Conceptual Model Of The Travale Geothermal Field Based On Recent Geophysical And Drilling Data Details Activities (0) Areas (0) Regions (0) Abstract: an updated picture of the Travale field is given, based on geophysical and drilling data acquired since 1978. In deriving the model, extensive use is made of the geophysical data produced in the course of the EEC test site programme (1980-1983), particularly from seismic and time domain EM methods which allowed for penetrating thick and conductive cover formations and to match deep tectonic and hydrothermal alteration trends thought to indirectly characterize the geothermal reservoir. It is

75

Fuel Cell Technologies Office: Transport Modeling Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Transport Modeling Transport Modeling Working Group to someone by E-mail Share Fuel Cell Technologies Office: Transport Modeling Working Group on Facebook Tweet about Fuel Cell Technologies Office: Transport Modeling Working Group on Twitter Bookmark Fuel Cell Technologies Office: Transport Modeling Working Group on Google Bookmark Fuel Cell Technologies Office: Transport Modeling Working Group on Delicious Rank Fuel Cell Technologies Office: Transport Modeling Working Group on Digg Find More places to share Fuel Cell Technologies Office: Transport Modeling Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

76

A conceptual sedimentological-geostatistical model of aquifer heterogeneity based on outcrop studies  

Science Conference Proceedings (OSTI)

Three outcrop studies were conducted in deposits of different depositional environments. At each site, permeability measurements were obtained with an air-minipermeameter developed as part of this study. In addition, the geological units were mapped with either surveying, photographs, or both. Geostatistical analysis of the permeability data was performed to estimate the characteristics of the probability distribution function and the spatial correlation structure. The information obtained from the geological mapping was then compared with the results of the geostatistical analysis for any relationships that may exist. The main field site was located in the Albuquerque Basin of central New Mexico at an outcrop of the Pliocene-Pleistocene Sierra Ladrones Formation. The second study was conducted on the walls of waste pits in alluvial fan deposits at the Nevada Test Site. The third study was conducted on an outcrop of an eolian deposit (miocene) south of Socorro, New Mexico. The results of the three studies were then used to construct a conceptual model relating depositional environment to geostatistical models of heterogeneity. The model presented is largely qualitative but provides a basis for further hypothesis formulation and testing.

Davis, J.M.

1994-01-01T23:59:59.000Z

77

Conceptual modeling and development of an intelligent agent-assisted decision support system for anti-money laundering  

Science Conference Proceedings (OSTI)

Criminal elements in today's technology-driven society are using every means available at their disposal to launder the proceeds from their illegal activities. In response, international anti-money laundering (AML) efforts are being made. The events ... Keywords: Anti-money laundering, Business intelligence application, Conceptual model, Decision support systems, Intelligent agents

Shijia Gao; Dongming Xu

2009-03-01T23:59:59.000Z

78

Conceptual model for regional radionuclide transport from a basalt repository site. Final draft, technical memorandum  

SciTech Connect

This technical memorandum was prepared to: (1) describe a typical basalt radionuclide repository site, (2) describe geologic and hydrologic processes associated with regional radionuclide transport in basalts, (3) define the parameters required to model regional radionuclide transport from a basalt repository site, and (4) develop a ''conceptual model'' of radionuclide transport from a basalt repository site. In a general hydrological sense, basalts may be described as layered sequences of aquifers and aquitards. The Columbia River Basalt, centered near the semi-arid Pasco Basin, is considered by many to be typical basalt repository host rock. Detailed description of the flow system including flow velocities with high-low hydraulic conductivity sequences are not possible with existing data. However, according to theory, waste-transport routes are ultimately towards the Columbia River and the lengths of flow paths from the repository to the biosphere may be relatively short. There are many physical, chemical, thermal, and nuclear processes with associated parameters that together determine the possible pattern of radionuclide migration in basalts and surrounding formations. Brief process descriptions and associated parameter lists are provided. Emphasis has been placed on the use of the distribution coefficient in simulating ion exchange. The use of the distribution coefficient approach is limited because it takes into account only relatively fast mass transfer processes. In general, knowledge of hydrogeochemical processes is primitive.

Walton, W.C.; Voorhees, M.L.; Prickett, T.A.

1980-05-23T23:59:59.000Z

79

I. Atmosphere Model Working Group (AMWG)  

E-Print Network (OSTI)

The AMWG used its development allocation for three main purposes: to understand, diagnose, and document the behavior of the Community Atmosphere Model (CAM3); to continue the evolution of the model beyond CAM3, including debugging and software engineering; and to understand and document aspects of the new functionality of the model. Substantial software engineering changes were made to CAM to more effectively isolate the points of interaction between model components and the rest of the CAM infrastructure. More components have an Earth System Modeling Framework (ESMF) type structure of "Initialize", "Run " and "Finalize, " which moves the model toward ESMF compatibility. We also made a number of changes to the model to facilitate the inclusion of other dynamical cores, particularly cores that will allow CAM to use model grids that are not oriented by latitude and longitude (e.g., cubed sphere and icosahedral/ triangular meshes). Extra software engineering features were also added, including Single Program-Multiple Data (SPMD) optimizations and extensions for CRAY and NEC platforms, changes to support IA64 clusters, and a number of bug fixes to improve

unknown authors

2004-01-01T23:59:59.000Z

80

A Model For Working With Manufacturers – NIST Center for ...  

Science Conference Proceedings (OSTI)

Page 1. A Model For Working With Manufacturers – ... Average vehicle weight ... Knows that lightweight multi-material vehicles will be the norm ...

2013-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Modeling and Simulation for Mission Operations Work System Design  

Science Conference Proceedings (OSTI)

Work system analysis and design is complex and nondeterministic. In this paper we describe Brahms, a multiagent modeling and simulation environment for designing complex interactions in human-machine systems. Brahms was originally conceived as a business ... Keywords: Agent Languages, Business Process Modeling, Mission Operations Design, Multiagent Simulation, Work Practices

Maarten Sierhuis; William J. Clancey; Chin Seah; Jay P. Trimble; Michael H. Sims

2003-04-01T23:59:59.000Z

82

Linking Work Design and Corporate Social Responsibility Through an Exploratory Model for the Interdependency of Work Characteristics and Corporate Social Responsibility Orientation  

E-Print Network (OSTI)

Driven by the demands of drastic changes in today’s nature of work due to globalization and technological advances, researchers have continually revisited, redesigned, and restructured work design processes in a quest to identify the key characteristics that can result in desired organizational outcomes. Specifically, in current times, organizations are looking to develop socially responsible outcomes, otherwise referred as corporate social responsibility (CSR). A possible link between work design and CSR has been postulated by researchers, but few studies have emerged where the associations between work design and CSR factors are examined. The purpose of this study was to explore the link between work design and CSR using a work design-CSR conceptual model that was developed based on previous literature. The model depicted relationships between work design factors and CSR factors. Work design factors included work characteristics and worker characteristics. Work characteristics were measured using task, knowledge, social, and contextual characteristics; while worker characteristics were measured using personality traits. CSR Orientation (CSRO) was used as a reflective indicator of CSR at the individual level. The study sample consisted of 941 job incumbents of a public education institution in Texas. The data were collected using an online survey that included the work design questionnaire, the short Big Five Inventory, and the CSRO questionnaire. The model was tested using Structural Equation Modeling. Based on the results, a significant association between work characteristics and CSRO factors were obtained. As hypothesized, associations were found between task characteristics and profit CSRO, and between social characteristics and legal CSRO and philanthropic CSRO. The knowledge characteristics were found to have negative association to philanthropic CSRO. The findings also suggest that jobs that are high on problem solving and job autonomy had a negative association to philanthropic CSRO. Similarly, as the job complexity increased, individuals’ orientation towards profit making decreased, and information processing was found to be linked to legal compliance. Research and practice implications of these results are discussed.

Kurup, Priya Darshini

2011-12-01T23:59:59.000Z

83

Groundwater monitoring program plan and conceptual site model for the Al-Tuwaitha Nuclear Research Center in Iraq.  

Science Conference Proceedings (OSTI)

The Radiation Protection Center of the Iraqi Ministry of Environment is developing a groundwater monitoring program (GMP) for the Al-Tuwaitha Nuclear Research Center located near Baghdad, Iraq. The Al-Tuwaitha Nuclear Research Center was established in about 1960 and is currently being cleaned-up and decommissioned by Iraq's Ministry of Science and Technology. This Groundwater Monitoring Program Plan (GMPP) and Conceptual Site Model (CSM) support the Radiation Protection Center by providing:A CSM describing the hydrogeologic regime and contaminant issues,recommendations for future groundwater characterization activities, anddescriptions of the organizational elements of a groundwater monitoring program. The Conceptual Site Model identifies a number of potential sources of groundwater contamination at Al-Tuwaitha. The model also identifies two water-bearing zones (a shallow groundwater zone and a regional aquifer). The depth to the shallow groundwater zone varies from approximately 7 to 10 meters (m) across the facility. The shallow groundwater zone is composed of a layer of silty sand and fine sand that does not extend laterally across the entire facility. An approximately 4-m thick layer of clay underlies the shallow groundwater zone. The depth to the regional aquifer varies from approximately 14 to 17 m across the facility. The regional aquifer is composed of interfingering layers of silty sand, fine-grained sand, and medium-grained sand. Based on the limited analyses described in this report, there is no severe contamination of the groundwater at Al-Tuwaitha with radioactive constituents. However, significant data gaps exist and this plan recommends the installation of additional groundwater monitoring wells and conducting additional types of radiological and chemical analyses.

Copland, John Robin; Cochran, John Russell

2013-07-01T23:59:59.000Z

84

Groundwater monitoring program plan and conceptual site model for the Al-Tuwaitha Nuclear Research Center in Iraq.  

SciTech Connect

The Radiation Protection Center of the Iraqi Ministry of Environment is developing a groundwater monitoring program (GMP) for the Al-Tuwaitha Nuclear Research Center located near Baghdad, Iraq. The Al-Tuwaitha Nuclear Research Center was established in about 1960 and is currently being cleaned-up and decommissioned by Iraq's Ministry of Science and Technology. This Groundwater Monitoring Program Plan (GMPP) and Conceptual Site Model (CSM) support the Radiation Protection Center by providing:A CSM describing the hydrogeologic regime and contaminant issues,recommendations for future groundwater characterization activities, anddescriptions of the organizational elements of a groundwater monitoring program. The Conceptual Site Model identifies a number of potential sources of groundwater contamination at Al-Tuwaitha. The model also identifies two water-bearing zones (a shallow groundwater zone and a regional aquifer). The depth to the shallow groundwater zone varies from approximately 7 to 10 meters (m) across the facility. The shallow groundwater zone is composed of a layer of silty sand and fine sand that does not extend laterally across the entire facility. An approximately 4-m thick layer of clay underlies the shallow groundwater zone. The depth to the regional aquifer varies from approximately 14 to 17 m across the facility. The regional aquifer is composed of interfingering layers of silty sand, fine-grained sand, and medium-grained sand. Based on the limited analyses described in this report, there is no severe contamination of the groundwater at Al-Tuwaitha with radioactive constituents. However, significant data gaps exist and this plan recommends the installation of additional groundwater monitoring wells and conducting additional types of radiological and chemical analyses.

Copland, John Robin; Cochran, John Russell

2013-07-01T23:59:59.000Z

85

Conceptual Design of a CERMET NTR Fission Core Using Multiphysics Modeling Techniques  

SciTech Connect

An initial pre-conceptual CERMET Nuclear Thermal Propulsion reactor system is investigated within this paper. Reactor configurations are investigated where the fuel consists of 60 vol.% UO2 and 40 vol.% W where the UO2 consists of Gd2O3 concentrations of 5 and 10 mol.%.Gd2O3. The fuel configuration consisting of 5 mol.% UO2 was found to have a total mass of 2761 kg and a thrust to weight ratio of 4.10 and required a coolant channel surface area to fueled volume ratio of approximately 15.0 in order to keep the centerline temperature below 3000 K. The configuration consisting of 10 mol.% Gd2O3 required a surface area to volume ratio of approximately 12.2 to cool the reactor to a peak temperature of 3000 K and had a total mass of 3200 kg and a thrust to weight ratio of 3.54. It is not known yet what concentration of Gd2O3 is required to maintain fuel stability at 3000 K; however, both reactors offer the potential for operations at 25,000 lb, and at a specific impulse which may range from 900 to 950 seconds.

Jonathan A. Webb; Brian J. Gross; William T. Taitano

2011-08-01T23:59:59.000Z

86

Impact of Proposed Disturbed Rock Zone Conceptual Model Modifications to the Waste Isolation Pilot Plant Performance Assessment  

Science Conference Proceedings (OSTI)

The United States Department of Energy (DOE) and Sandia National Laboratories (SNL) have recently proposed a set of updates that integrate data from recent site characterization studies to two conceptual models for the Waste Isolation Pilot Plant's Performance Assessment (WIPP PA) program. This paper discusses the changes to the Disturbed Rock Zone (DRZ) model, which describes the macroscopic manifestation of grain-scale microcracks and larger macro-cracks that are created by induced stresses in the salt surrounding excavations. The DRZ, as modeled in WIPP PA, is an important component of the repository system because its properties affect the quantity of available brine and its ability to enter the waste areas as well as the connectivity of panels after closure. The DOE and SNL have proposed decreasing the region that represents the DRZ in WIPP PA. Additionally, it has been proposed to make the permeability of DRZ a time-dependent quantity to reflect the long-term behavior. In this paper, the implementation of the proposed DRZ model changes is outlined, and the impact of the DRZ modifications on the long-term performance of the WIPP is discussed. The DRZ modifications generally reduced the amount of brine that entered into the repository, as well as reduced the pressure in the repository, except for scenarios in which a pressurized brine pocket was encountered. Overall, the saturation and pressure changes affected the frequency and magnitude of the direct brine and spalling volumes. (authors)

Clayton, D.J.; Ismail, A.E. [Sandia National Laboratories, Carlsbad, NM (United States)

2008-07-01T23:59:59.000Z

87

Comparing simulations of three conceptually different forest models with National Forest Inventory data  

Science Conference Proceedings (OSTI)

Although they were originally introduced for different purposes, forest models are often used today for scenario development, which includes forest production as one aspect of forest development. However, studies using an independent data set to compare ... Keywords: Climate change, Ecosystem model, Forest growth, Increment, Sensitivity, Simulator

Markus O. Huber; Chris S. Eastaugh; Thomas Gschwantner; Hubert Hasenauer; Georg Kindermann; Thomas Ledermann; Manfred J. Lexer; Werner Rammer; Stefan SchöRghuber; Hubert Sterba

2013-02-01T23:59:59.000Z

88

Developing physical surrogates for benthic biodiversity using co-located samples and regression tree models: a conceptual synthesis for a sandy temperate embayment  

Science Conference Proceedings (OSTI)

Marine physical and geochemical data can be valuable surrogates for predicting the distributions and assemblages of marine species. This study investigated the bio-environment surrogacy relationships in Jervis Bay, a sandy marine embayment in south-eastern ... Keywords: Jervis Bay, benthic biodiversity, conceptual model, surrogates

Zhi Huang; Matthew McArthur; Lynda Radke; Tara Anderson; Scott Nichol; Justy Siwabessy; Brendan Brooke

2012-11-01T23:59:59.000Z

89

Fuel Cell Technologies Office: Transport Modeling Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Transport Modeling Working Group Transport Modeling Working Group The Transport Modeling Working Group meets twice per year to exchange information, create synergies, share experimental and computational results, and collaboratively develop methodologies for and understanding of transport phenomena in polymer electrolyte fuel cell stacks. Its members include principle investigators and supporting personnel from transport-related projects funded by the U.S. Department of Energy (DOE). Learn more about DOE research activities can be found in the Multi-Year Research, Development, and Demonstration Plan. Description Technical Targets Meetings Contacts Description Fuel cell operation relies on effective mass transport of species through individual components and across the interfaces between components. Among these species are hydrogen, oxygen, water, protons, and electrons. Transport behavior is a function of operating conditions and component properties such as microstructure and surface properties. Understanding and optimizing the controlling transport phenomena are critical to the efficient and cost-effective operation of polymer electrolyte fuel cells. A better understanding of mass transport in the fuel cell, especially of water, has the potential to lead to improved designs and more efficient systems.

90

work  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

THE THE U.S. DEPARTMENT OF ENERGY'S WORKING CAPITAL FUND U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES OCTOBER 1998 AUDIT REPORT CR-B-99-01 MEMORANDUM FOR THE DIRECTOR, BUSINESS MANAGEMENT STAFF FROM: William S. Maharay Acting Manager, Capital Regional Audit Office, Office of Inspector General SUBJECT: INFORMATION : Audit Report on the Department's Working Capital Fund BACKGROUND The Department established the Working Capital Fund (Fund) in January 1996 as a financial management tool for charging the costs of common services provided at Headquarters to Departmental program offices. The objectives in establishing the Fund were to increase efficiency of the Department's operations, improve management of administrative services

91

Numerical Simulations and a Conceptual Model of the Stratocumulus to Trade Cumulus Transition  

Science Conference Proceedings (OSTI)

A two-dimensional eddy-resolving model is used to study the transition from the stratocumulus topped boundary layer to the trade cumulus boundary layer. The 10-day simulations use an idealized Lagrangian trajectory representative of summertime ...

Matthew C. Wyant; Christopher S. Bretherton; Hugh A. Rand; David E. Stevens

1997-01-01T23:59:59.000Z

92

Computer modeling reveals how surprisingly potent hepatitis C drug works  

NLE Websites -- All DOE Office Websites (Extended Search)

Hepatitis C computer modeling Hepatitis C computer modeling Computer modeling reveals how surprisingly potent hepatitis C drug works A study reveals how daclatasvir targets one of its proteins and causes the fastest viral decline ever seen with anti-HCV drugs - within 12 hours of treatment. February 19, 2013 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

93

Towards a Conceptual Model of User Acceptance of Location-Based Emergency Services  

Science Conference Proceedings (OSTI)

This paper investigates the introduction of location-based services by government as part of an all-hazards approach to modern emergency management solutions. Its main contribution is in exploring the determinants of an individual's acceptance or rejection ... Keywords: Acceptance, Location-Based Emergency Services, Privacy, Risk, Service Quality, Technology Acceptance Model TAM, Theory of Reasoned Action TRA, Trust, Visibility

Anas Aloudat, Katina Michael

2013-04-01T23:59:59.000Z

94

Choice and Chance: A Conceptual Model of Paths to Information Security Compromise  

Science Conference Proceedings (OSTI)

No longer the exclusive domain of technology experts, information security is now a management issue. Through a grounded approach using interviews, observations, and secondary data, we advance a model of the information security compromise process from ... Keywords: computer crime, information security management, information systems risk management

Sam Ransbotham; Sabyasachi Mitra

2009-03-01T23:59:59.000Z

95

Evaluating Sustainability and Greening Methods: A Conceptual Model for Information Technology Management  

Science Conference Proceedings (OSTI)

Recently much has been written about sustainability and greening and the issue is likely to continue to resurface on the agendas of decision makers. This paper addresses one aspect of the topic: that of sustainability and greening through information ... Keywords: Capability Maturity Model, Green Maturity Assessment GMA, Greening, Information Technology, Sustainability

Olga Petkova, A.T. Jarmoszko, Marianne D'Onofrio, Joo Eng Lee-Partridge

2013-07-01T23:59:59.000Z

96

Conceptual Model Summary Report Simulation Framework for Regional Geologic CO{sub 2} Storage Along Arches Province of Midwestern United States  

Science Conference Proceedings (OSTI)

A conceptual model was developed for the Arches Province that integrates geologic and hydrologic information on the Eau Claire and Mt. Simon formations into a geocellular model. The conceptual model describes the geologic setting, stratigraphy, geologic structures, hydrologic features, and distribution of key hydraulic parameters. The conceptual model is focused on the Mt. Simon sandstone and Eau Claire formations. The geocellular model depicts the parameters and conditions in a numerical array that may be imported into the numerical simulations of carbon dioxide (CO{sub 2}) storage. Geophysical well logs, rock samples, drilling logs, geotechnical test results, and reservoir tests were evaluated for a 500,000 km{sup 2} study area centered on the Arches Province. The geologic and hydraulic data were integrated into a three-dimensional (3D) grid of porosity and permeability, which are key parameters regarding fluid flow and pressure buildup due to CO{sub 2} injection. Permeability data were corrected in locations where reservoir tests have been performed in Mt. Simon injection wells. The final geocellular model covers an area of 600 km by 600 km centered on the Arches Province. The geocellular model includes a total of 24,500,000 cells representing estimated porosity and permeability distribution. CO{sub 2} injection scenarios were developed for on-site and regional injection fields at rates of 70 to 140 million metric tons per year.

None

2011-06-30T23:59:59.000Z

97

LBL research on The Geysers: Conceptual models, simulation and monitoring studies  

DOE Green Energy (OSTI)

As part of The Geysers research activities of DOE's Geothermal Reservoir Technology Program, LBL, in close co-operation with industry, is performing fundamental and applied studies of vapor- dominated geothermal systems. These studies include the development of new methods for evaluating cold water injection, monitoring of the seismic activity in The Geysers associated with injection and production, interpretation of pressure and geochemical changes measured during well tests and long-term production and injection operations, and improvement of existing models of the geothermal system. A review is given of the latest results of DOE-sponsored LBL reservoir engineering and seismic studies relevant to The Geysers.

Bodvarsson, G.S.; Lippmann, M.J.; Majer, E.L.; Pruess, K.

1992-03-01T23:59:59.000Z

98

LBL Research on the Geysers: Conceptual Models, Simulation and Monitoring Studies  

DOE Green Energy (OSTI)

As part of The Geysers research activities of DOE's Geothermal Reservoir Technology Program, LBL, in close cooperation with industry, is performing fundamental and applied studies of vapor-dominated geothermal systems. These studies include the development of new methods for evaluating cold water injection, monitoring of the seismic activity in The Geysers associated with injection and production, interpretation of pressure and geochemical changes measured during well tests and long-term production and injection operations, and improvement of existing models of the geothermal system. A review is given of the latest results of DOE-sponsored LBL reservoir engineering and seismic studies relevant to The Geysers.

Bodvarsson, G.S.; Lippmann, M.J.; Majer, E.L.; Pruess, K.

1992-03-24T23:59:59.000Z

99

LBL research on The Geysers: Conceptual models, simulation and monitoring studies  

DOE Green Energy (OSTI)

As part of The Geysers research activities of DOE`s Geothermal Reservoir Technology Program, LBL, in close co-operation with industry, is performing fundamental and applied studies of vapor- dominated geothermal systems. These studies include the development of new methods for evaluating cold water injection, monitoring of the seismic activity in The Geysers associated with injection and production, interpretation of pressure and geochemical changes measured during well tests and long-term production and injection operations, and improvement of existing models of the geothermal system. A review is given of the latest results of DOE-sponsored LBL reservoir engineering and seismic studies relevant to The Geysers.

Bodvarsson, G.S.; Lippmann, M.J.; Majer, E.L.; Pruess, K.

1982-03-01T23:59:59.000Z

100

A comparative evaluation of conceptual models for the Snake River Plain aquifer at the Idaho Chemical Processing Plant, INEL  

SciTech Connect

Geologic and hydrologic data collected by the United States Geological Survey (USGS) are used to evaluate the existing ground water monitoring well network completed in the upper portion of the Snake River Plain aquifer (SRPA) beneath the Idaho Chemical Processing Plant (ICPP). The USGS data analyzed and compared in this study include: (a) lithologic, geophysical, and stratigraphic information, including the conceptual geologic models intrawell, ground water flow measurement (Tracejector tests) and (c) dedicated, submersible, sampling group elevations. Qualitative evaluation of these data indicate that the upper portion of the SRPA is both heterogeneous and anisotropic at the scale of the ICPP monitoring well network. Tracejector test results indicate that the hydraulic interconnection and spatial configuration of water-producing zones is extremely complex within the upper portion of the SRPA. The majority of ICPP monitoring wells currently are equipped to sample ground water only the upper lithostratigraphic intervals of the SRPA, primarily basalt flow groups E, EF, and F. Depth-specific hydrogeochemical sampling and analysis are necessary to determine if ground water quality varies significantly between the various lithostratigraphic units adjacent to individual sampling pumps.

Prahl, C.J.

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Use of GIS and 3D Modeling for Development and Conceptualization of a Performance Assessment Model for Decommissioning of a Complex Site  

Science Conference Proceedings (OSTI)

Geographic Information Systems (GIS) and 3D geo-spatial modeling were employed to facilitate development and conceptualization of a performance assessment (PA) model that will be used to evaluate the health impacts of residual radioactivity at a former nuclear materials processing facility site in New York. Previous operations have resulted in a number of different sources of radiological contamination that must be assessed during site decommissioning. A performance assessment model is being developed to estimate radiological dose to potential receptors through the simulation of the release and transport of radionuclides, and exposure to residual contamination for hundreds to thousands of years in the future. A variety of inputs are required to parameterize the performance assessment model, such as: distance from the waste to surface water bodies, thickness of geologic units for saturated transport, saturated thickness of the geologic units, and spatial and temporal average of percent of waste that is saturated. GIS and 3D modeling are used to analyze and abstract aleatory uncertainty associated with the dimensionality of the geologic system into epistemic uncertainty for one- and two-dimensional process models for flow and transport of radionuclides. Three-dimensional geo-spatial modeling was used to develop the geologic framework and the geometrical representation of the residual contamination within the geologic framework. GIS was used in the initial development and parameterization of the transport pathways, to provide spatial context to the PA model, and to link it to the 3D geologic framework and contamination geometry models. Both the GIS and 3-D modeling were used to interpret the results of runs of the PA model. (authors)

Esh, D. W.; Gross, A. J.; Thaggard, M. [U.S. Nuclear Regulatory Commission, Two White Flint North, MS T7J8, 11545 Rockville Pike, Rockville, MD 20852 (United States)

2006-07-01T23:59:59.000Z

102

Reference modeling for higher education budgeting: applying the H2 toolset for conceptual modeling of performance-based funding systems  

Science Conference Proceedings (OSTI)

The Higher Education (HE) sector has gained remarkable economic importance worldwide. There is a huge amount of institutions competing in this dynamically evolving market. Emerging concepts like new public management advise to organize HE institutions ... Keywords: H2, budgeting, higher education (HE), incentive system, indicator system, information model, performance-based funding, reference modeling

Jan vom Brocke; Christian Buddendick; Alexander Simons

2007-09-01T23:59:59.000Z

103

Combined Estimation of Hydrogeologic Conceptual Model, Parameter, and Scenario Uncertainty with Application to Uranium Transport at the Hanford Site 300 Area  

SciTech Connect

This report to the Nuclear Regulatory Commission (NRC) describes the development and application of a methodology to systematically and quantitatively assess predictive uncertainty in groundwater flow and transport modeling that considers the combined impact of hydrogeologic uncertainties associated with the conceptual-mathematical basis of a model, model parameters, and the scenario to which the model is applied. The methodology is based on a n extension of a Maximum Likelihood implementation of Bayesian Model Averaging. Model uncertainty is represented by postulating a discrete set of alternative conceptual models for a site with associated prior model probabilities that reflect a belief about the relative plausibility of each model based on its apparent consistency with available knowledge and data. Posterior model probabilities are computed and parameter uncertainty is estimated by calibrating each model to observed system behavior; prior parameter estimates are optionally included. Scenario uncertainty is represented as a discrete set of alternative future conditions affecting boundary conditions, source/sink terms, or other aspects of the models, with associated prior scenario probabilities. A joint assessment of uncertainty results from combining model predictions computed under each scenario using as weight the posterior model and prior scenario probabilities. The uncertainty methodology was applied to modeling of groundwater flow and uranium transport at the Hanford Site 300 Area. Eight alternative models representing uncertainty in the hydrogeologic and geochemical properties as well as the temporal variability were considered. Two scenarios represent alternative future behavior of the Columbia River adjacent to the site were considered. The scenario alternatives were implemented in the models through the boundary conditions. Results demonstrate the feasibility of applying a comprehensive uncertainty assessment to large-scale, detailed groundwater flow and transport modeling and illustrate the benefits of the methodology I providing better estimates of predictive uncertiay8, quantitative results for use in assessing risk, and an improved understanding of the system behavior and the limitations of the models.

Meyer, Philip D.; Ye, Ming; Rockhold, Mark L.; Neuman, Shlomo P.; Cantrell, Kirk J.

2007-07-30T23:59:59.000Z

104

Numerical simulation of the conceptual model for mCCHP-stirling engine based on renewable energy sources  

Science Conference Proceedings (OSTI)

The constituent elements of the mCCHP system are mCHP-Stirling Engine as a base unit, auxiliary energy sources, storage units for ensuring load peaks, the system for cooling and accumulating cold water. For the elaboration of the conceptual device of ... Keywords: CHP, mCCHP, microcogeneration, residential building, trigeneration

Nicolae Badea; Emil Ceang?; Sergiu Caraman; Marian Barbu

2010-10-01T23:59:59.000Z

105

Using the Conceptual Site Model to Remediate Two Sites in New England and Reach License Termination and Site Reuse  

SciTech Connect

The Conceptual Site Model (CSM) is a powerful tool for understanding the link between contamination sources, cleanup objectives, and ultimate site reuse. The CSM describes the site setting, geology, hydrogeology, potential sources, release mechanisms and migration pathways of contaminants. The CSM is needed to understand the extent of contamination and how receptors may be exposed to both radiological and chemical constituents. A key component of the CSM that is often overlooked concerns how the regulatory requirements drive remediation and how each has to be integrated into the CSM to ensure that all stakeholder requirements are understood and addressed. This paper describes how the use of the CSM helped reach closure and reuse at two facilities in Connecticut that are pursuing termination of their Nuclear Regulatory Commission (NRC) license. The two facilities are the Combustion Engineering Site, located in Windsor, Connecticut, (CE Windsor Site) and the Connecticut Yankee Atomic Power Company, located in Haddam Neck, Connecticut (CYAPCO). The closure of each of these facilities is regulated by four agencies: - Nuclear Regulatory Commission (NRC) - which requires cleanup levels for radionuclides to be protective of public health; - US Environmental Protection Agency (USEPA) - which requires cleanup levels for chemicals to be protective of public health and the environment; - Connecticut Department of Environmental Protection (CTDEP) Bureau of Air Management, Radiation Division - which requires cleanup levels for radionuclides to be protective of public health; and - Connecticut Department of Environmental Protection (CTDEP) Bureau of Water Protection and Land Reuse - which requires cleanup levels for chemicals to be protective of public health and the environment. Some of the radionuclides at the CE Windsor Site are also regulated under the Formerly Utilized Site Remedial Action Program (FUSRAP) under the Army Corps of Engineers. The remainder of this paper presents the similarities and differences between the CSMs for these two sites and how each site used the CSM to reach closure. Although each of these site have unique histories and physical features, the CSM approach was used to understand the geology, hydrogeology, migration and exposure pathways, and regulatory requirements to successfully characterize and plan closure of the sites. A summary of how these attributes affected site closure is provided.

Glucksberg, Nadia; Peters, Jay [MACTEC Engineering and Consulting, Inc., Portland, Maine, 04112 and Wakefield, Massachusetts, 01880 (United States)

2008-01-15T23:59:59.000Z

106

Women, Work, and Welfare: The Need for a Community Model  

E-Print Network (OSTI)

working on the GAIN (AFDC) Participant Needs Assessmentwith Dependent Children (AFDC). The GAIN legislation is aback onto welfare. Most AFDC recipients are not chronic

Welch, Mary Beth

1987-01-01T23:59:59.000Z

107

Conceptual Proposal  

NLE Websites -- All DOE Office Websites (Extended Search)

Monitoring-Based Commissioning: Benchmarking Analysis of 24 UC/CSU/IOU Projects Evan Mills, Ph.D Paul Mathew, Ph.D. Lawrence Berkeley National Laboratory Berkeley, California Report Prepared for: California Energy Commission Public Interest Energy Research (PIER) Technology Demonstration Program April 2009 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process

108

Don't Work, Work at Home, or Commute? Discrete Choice Models of the Decision for San Francisco Bay Area Residents  

E-Print Network (OSTI)

Don’t Work, Work at Home, or Commute? Discrete Choice ModelsA. R. (1997) The Time Bind: When Work Becomes Homeand Home Becomes Work. New York: Metropolitan Books. Ho, C.

Ory, David T.; Mokhtarian, Patricia L.

2005-01-01T23:59:59.000Z

109

A re-connection : modeling built works after natural systems  

E-Print Network (OSTI)

The constructed world is full of built works that consume energy and emit unusable waste. This is fostered by the act of 'masking' the true situation and the lack of embedded feedback, associated with the destructive ...

Griffith, Laurie Anne, 1973-

2001-01-01T23:59:59.000Z

110

Summary of Conceptual Models and Data Needs to Support the INL Remote-Handled Low-Level Waste Disposal Facility Performance Assessment and Composite Analysis  

SciTech Connect

An overview of the technical approach and data required to support development of the performance assessment, and composite analysis are presented for the remote handled low-level waste disposal facility on-site alternative being considered at Idaho National Laboratory. Previous analyses and available data that meet requirements are identified and discussed. Outstanding data and analysis needs are also identified and summarized. The on-site disposal facility is being evaluated in anticipation of the closure of the Radioactive Waste Management Complex at the INL. An assessment of facility performance and of the composite performance are required to meet the Department of Energy’s Low-Level Waste requirements (DOE Order 435.1, 2001) which stipulate that operation and closure of the disposal facility will be managed in a manner that is protective of worker and public health and safety, and the environment. The corresponding established procedures to ensure these protections are contained in DOE Manual 435.1-1, Radioactive Waste Management Manual (DOE M 435.1-1 2001). Requirements include assessment of (1) all-exposure pathways, (2) air pathway, (3) radon, and (4) groundwater pathway doses. Doses are computed from radionuclide concentrations in the environment. The performance assessment and composite analysis are being prepared to assess compliance with performance objectives and to establish limits on concentrations and inventories of radionuclides at the facility and to support specification of design, construction, operation and closure requirements. Technical objectives of the PA and CA are primarily accomplished through the development of an establish inventory, and through the use of predictive environmental transport models implementing an overarching conceptual framework. This document reviews the conceptual model, inherent assumptions, and data required to implement the conceptual model in a numerical framework. Available site-specific data and data sources are then addressed. Differences in required analyses and data are captured as outstanding data needs.

A. Jeff Sondrup; Annette L. Schafter; Arthur S. Rood

2010-09-01T23:59:59.000Z

111

Unsatisfiability reasoning in ORM conceptual schemes  

Science Conference Proceedings (OSTI)

ORM (Object-Role Modeling) is a rich and well-known conceptual modeling method. As ORM has a formal semantics, reasoning tasks such as satisfiability checking of an ORM schema naturally arise. Satisfiability checking allows a developer to automatically ...

Mustafa Jarrar; Stijn Heymans

2006-03-01T23:59:59.000Z

112

INEEL Subregional Conceptual Model Report; Volume 1 - Summary of Existing Knowledge of Natural and Anthropogenic Influences Governing Subsurface Contaminant Transport in the INEEL Subregion of the Eastern Snake River Plain  

Science Conference Proceedings (OSTI)

The National Research Council has defined a conceptual model as ''an evolving hypothesis identifying the important features, processes, and events controlling fluid flow and contaminant transport of consequence at a specific field site in the context of a recognized problem''. Presently, several subregional conceptual models are under development at the Idaho National Engineering and Environmental Laboratory (INEEL). Additionally, facility-specific conceptual models have been described as part of INEEL environmental restoration activities. Compilation of these models is required to develop a comprehensive conceptual model that can be used to strategically plan for future groundwater research activities at the INEEL. Conceptual models of groundwater flow and contaminant transport at the INEEL include the description of the geologic framework, matrix hydraulic properties, and inflows and outflows. They also include definitions of the contaminant source term and contaminant transport mechanisms. The geologic framework of the INEEL subregion is described by the geometry of the system, stratigraphic units within the system, and structural features that affect groundwater flow and contaminant transport. These elements define geohydrologic units that make up the Snake River Plain Aquifer (SRPA). The United States Geological Survey (USGS) conceptual model encompasses approximately 1,920 mi2 of the eastern Snake River Plain. The Waste Area Group (WAG)-10 model includes the USGS area and additional areas to the northeast and southeast. Both conceptual models are bounded to the northwest by the Pioneer Mountains, Lost River Range, and Lemhi Mountains. They are bounded to the southeast by groundwater flow paths determined from aquifer water-level contours. The upgradient extent of the USGS model is a water-level contour that includes the northeastern boundary of the INEEL. The WAG-10 model includes more of the Mud Lake area to utilize previous estimates of underflow into the subregion. Both conceptual models extend approximately 25 miles to the southwest of the INEEL, a distance sufficient to include known concentrations of contaminant tracers. Several hypotheses have been developed concerning the effective thickness of the SRPA at the INEEL. The USGS model has defined the effective thickness from electrical resistivity and borehole data to be as much as 2,500 ft in the eastern part of the subregion and as much as 4,000 ft in the southwestern part. The WAG-10 model has developed two alternatives using aquifer-temperature and electrical resistivity data. The ''thick'' aquifer interpretation utilizes colder temperature data and includes a northtrending zone in which the thickness exceeds 1,300 ft and with a maximum thickness of 1,700 ft. The ''thin'' aquifer interpretation minimizes aquifer thickness, with thickness ranging from 328 to 1,300 ft. Facility-specific models generally have focused efforts on the upper 250 ft of saturation. Conceptual models have utilized a stratigraphic data set to define geohydrologic units within the INEEL subregion. This data set, compiled from geophysical logs and cores from boreholes, correlates the thick, complex stack of basalt flows across the subregion. Conceptual models generally concur that the upper geohydrologic unit consists of a section of highly fractured, multiple, thin basalt flows and sedimentary interbeds. Beneath this unit is an areally extensive, thick, unfractured basalt flow that rises above the water table southwest of the INEEL. The bottom unit consists of a thick section of slightly- to moderately-altered basalt. A key objective of the DOE water-integration project at the INEEL is to coordinate development of a subregional conceptual model of groundwater flow and contaminant transport that is based on the best available understanding of geologic and hydrologic features. The first step in this process is to compile and summarize the current conceptual models of groundwater flow and contaminant transport at the INEEL that have been developed from extensive geohydrologic studies con

Wichlacz, Paul Louis; Orr, Brennan

2002-08-01T23:59:59.000Z

113

Thermodynamic Modeling and Analysis of the Ratio of Heat to Power Based on a Conceptual CHP System  

E-Print Network (OSTI)

The CHP system not only produces electrical energy, but also produces thermal energy. An extensive analysis of the CHP market reveals that one of the most important engineering characteristics is flexibility. A variable heat-to-power ratio has compelling advantages over a fixed one and enables a power plant to achieve reliability and flexibility, which are very important characteristics for a CHP system. In this paper, a conceptual SOFC/GT CHP system is presented. The parameters' effect on the variable heat-to-power ratio is investigated. As SOFC reactors are still under development, a flexible simulation tool based on mass and energy balances coupled with appropriate expressions for the reaction kinetics, thermodynamic constants and material properties, is presented for adaptation to different cell geometries and operating conditions. Simulation results show that the SOFC/GT CHP system's advantage over the engine is that a low stack running temperature can achieve a low heat-to- power ratio.

Liu, Z.; Li, X.; Liu, Z.

2006-01-01T23:59:59.000Z

114

Modeling of crowdsourcing platforms and granularity of work organization in future internet  

Science Conference Proceedings (OSTI)

Beside of social media networks, crowdsourcing is one of the emerging new applications and business models in the Future Internet, which can dramatically change the future of work and work organization in the on-line world. The crowdsourcing technology ...

Tobias Hoßfeld; Matthias Hirth; Phuoc Tran-Gia

2011-09-01T23:59:59.000Z

115

Multidisciplinary Conceptual Design of a Transonic High Pressure Compressor.  

E-Print Network (OSTI)

??The aim of this work is to develop a systematic approach for multidisciplinary high pressure transonic axial compressor conceptual design. Several aspects have to be… (more)

Ersavas, Funda

2011-01-01T23:59:59.000Z

116

Conceptual Models for Migration of Key Groundwater Contaminants Through the Vadose Zone and Into the Upper Unconfined Aquifer Below the B-Complex  

Science Conference Proceedings (OSTI)

The B-Complex contains 3 major crib and trench disposal sites and 3 SST farms that have released nearly 346 mega-liters of waste liquids containing the following high groundwater risk drivers: ~14,000 kg of CN, 29,000 kg of Cr, 12,000 kg of U and 145 Ci of Tc-99. After a thorough review of available vadose zone sediment and pore water, groundwater plume, field gamma logging, field electrical resistivity studies, we developed conceptual models for which facilities have been the significant sources of the contaminants in the groundwater and estimated the masses of these contaminants remaining in the vadose zone and currently present in the groundwater in comparison to the totals released. This allowed us to make mass balance calculations on how consistent our knowledge is on the current deep vadose zone and groundwater distribution of contaminants. Strengths and weaknesses of the conceptual models are discussed as well as implications on future groundwater and deep vadose zone remediation alternatives. Our hypothesized conceptual models attribute the source of all of the cyanide and most of the Tc-99 currently in the groundwater to the BY cribs. The source of the uranium is the BX-102 tank overfill event and the source of most of the chromium is the B-7-A&B and B-8 cribs. Our mass balance estimates suggest that there are much larger masses of U, CN, and Tc remaining in the deep vadose zone within ~20 ft of the water table than is currently in the groundwater plumes below the B-Complex. This hypothesis needs to be carefully considered before future remediation efforts are chosen. The masses of these groundwater risk drivers in the the groundwater plumes have been increasing over the last decade and the groundwater plumes are migrating to the northwest towards the Gable Gap. The groundwater flow rate appears to flucuate in response to seasonal changes in hydraulic gradient. The flux of contaminants out of the deep vadose zone from the three proposed sources also appears to be transient such that the evolution of the contaminant plumes is transient.

Serne, R. Jeffrey; Bjornstad, Bruce N.; Keller, Jason M.; Thorne, Paul D.; Lanigan, David C.; Christensen, J. N.; Thomas, Gregory S.

2010-07-01T23:59:59.000Z

117

ADVANCING THE WORK COMPATIBILITY MODEL THROUGH THE ANALOGY WITH COMPRESSOR/TURBINE MODELS.  

E-Print Network (OSTI)

??• Background: Work Compatibility (WC) is an integrated framework of work design that was developed to quantify the performance characteristics of the human-at-work system as… (more)

EL-SAYED, MOHAMED A.

2007-01-01T23:59:59.000Z

118

Partially autonomous conceptual development of multifunctional structures  

Science Conference Proceedings (OSTI)

Partially autonomous conceptual development of Multifunctional Structures (MFSs) is achieved using an analogy with two mechanisms found in embryo development in biology: induction and gene transcription. The induction model is achieved autonomously ...

Yuemin Hou; Linhong Ji

2011-02-01T23:59:59.000Z

119

Model for estimating Venezuelan population with working age using artificial neural networks  

Science Conference Proceedings (OSTI)

This work presents the development of an Artificial Neural Networks model for estimating the female and male population with working age in Venezuela. For the creation of the model it is used the previous year values related to the employed, unemployed ... Keywords: artificial neural networks, labor force, regression analysis

Samaria Muñoz-Bravo; Anna Pérez-Méndez; Francklin Rivas-Echeverría

2009-03-01T23:59:59.000Z

120

Appendix A: Conceptual Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL-Research Support Facilities TABLE OF CONTENTS NREL-Research Support Facilities TABLE OF CONTENTS Solicitation No. RFJ-8-77550 Appendix A: Conceptual Documents Page 1 of 299 February 6, 2008 Appendix A CONCEPTUAL DOCUMENTS TABLE OF CONTENTS INTRODUCTION ...................................................................................................................... 2 PART 1-PROCEDURES .......................................................................................................... 3 PART 2-PROGRAM ............................................................................................................... 59 PART 3-PERFORMANCE SPECIFICATIONS .................................................................... 245 APPENDIX LIST .................................................................................................................. 299

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Improvement of modelling capabilities for assessing urban contamination : The EMRAS Urban Remediation Working Group.  

SciTech Connect

The Urban Remediation Working Group of the International Atomic Energy Agency's Environmental Modeling for Radiation Safety (EMRAS) programme was established to improve modeling and assessment capabilities for radioactively contaminated urban situations, including the effects of countermeasures. An example of the Working Group's activities is an exercise based on Chernobyl fallout data in Ukraine, which has provided an opportunity to compare predictions among several models and with available measurements, to discuss reasons for discrepancies, and to identify areas where additional information would be helpful.

Thiessen, K. M.; Batandjieva, B.; Andersson, K. G.; Arkhipov, A.; Charnock, T. W.; Gallay, F.; Gaschak, S.; Golikov, V.; Hwang, W. T.; Kaiser, J. C.; Kamboj, S.; Steiner, M.; Tomas, J.; Trifunovic, D.; Yu, C.; Ziemer, R. L.; Zlobenko, B.; Environmental Science Division; SENES Oak Ridge; IAEA; Riso National Lab.; Chernobyl Center for Nuclear Safety; Health Protection Agency; IRSN; Inst. of Radiation Hygene of the Ministry of Public Health, Russian Federation; KAERI, Republic of Korea; GSF, Germany; BfS, Germany; CPHR, Cuba; State Office for Radiation Protection, Croatia; AECL, Canada; National Academy of Science, Ukraine

2008-01-01T23:59:59.000Z

122

Clean Energy Works Portland: A Model For Retrofit Projects | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clean Energy Works Portland: A Model For Retrofit Projects Clean Energy Works Portland: A Model For Retrofit Projects Clean Energy Works Portland: A Model For Retrofit Projects June 4, 2010 - 4:34pm Addthis Paul Lester Communications Specialist for the Office of Energy Efficiency and Renewable Energy What does this mean for me? Clean Energy Works Portland (CEWP) seeks to cut energy costs for residents, create green jobs and slash greenhouse gases by retrofitting 500 homes in the Portland area by this fall. A program developed by the city of Portland, Ore., is proving to be a model of public and private collaboration for large-scale home retrofit projects throughout the country. Clean Energy Works Portland (CEWP) seeks to cut energy costs for residents, create green jobs and slash greenhouse gases by retrofitting 500 homes in

123

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE))

This Review Module is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the adequacy of the conceptual design package prior to CD-1 approval. It focuses on...

124

Review: Interpretive review of conceptual frameworks and research models that inform Australia's agricultural vulnerability to climate change  

Science Conference Proceedings (OSTI)

Agriculture in Australia is highly vulnerable to climate change. Understanding the sector's vulnerability is critical to developing immediate policy for the future of the agricultural industries and their communities. This review aims to identify research ... Keywords: Biophysical models, Contextual vulnerability, Outcome vulnerability

Leonie J. Pearson; Rohan Nelsonc; Steve Crimp; Jenny Langridge

2011-02-01T23:59:59.000Z

125

A conceptual model and preliminary estimate of potential tritium migration from the Benham (U-20c) site, Pahute Mesa, Nevada Test Site  

Science Conference Proceedings (OSTI)

U-20c is the site of a large below-water-table nuclear test near the Nevada Test Site boundary. A conceptual model of potential groundwater migration of tritium from U-20c is constructed and quantitatively evaluated in this report. The lower portion of the collapse chimney at Benham is expected to intersect 200 m of permeable rhyolite lava, overlain by similar thicknesses of low-permeability zeolitized bedded tuff, then permeable welded tuff. Vertical groundwater flow through the chimney is predicted to be minimal, horizontal transport should be controlled by the regional groundwater flow. Analytic solutions treating only advective transport indicate 1 to 2 km of tritium movement (95% confidence interval 0.7--2.5 km) within 5 years after test-related pressure-temperature transients have dissipated. This point lies at the axis of a potentiometric surface trough along the west edge of Area 20, Nevada Test Site. Within 25 years, movement is predicted to extend to 3 km (95% confidence interval 2--5 km) approximately to the intersection of the trough and the Nevada Test Site boundary. Considering the effects of radioactive decay, but not dispersion, plume concentration would fall below Safe Drinking Water Act standards by 204 years, at a predicted distance of 11 km (95% confidence interval 7--31 km). This point is located in the eastern portion of the Timber Mountain Caldera moat within the Nellis Air Force Range (military bombing range).

Brikowski, T.; Mahin, G. [Nevada Univ., Reno, NV (United States). Water Resources Center

1993-08-01T23:59:59.000Z

126

U.S. National Committee for Rock Mechanics; and Conceptual model of fluid infiltration in fractured media. Project summary, July 28, 1997--July 27, 1998  

SciTech Connect

The title describes the two tasks summarized in this report. The remainder of the report contains information on meetings held or to be held on the subjects. The US National Committee for Rock Mechanics (USNC/RM) provides for US participation in international activities in rock mechanics, principally through adherence to the International Society for Rock Mechanics (ISRM). It also keeps the US rock mechanics community informed about new programs directed toward major areas of national concern in which rock mechanics problems represent critical or limiting factors, such as energy resources, excavation, underground storage and waste disposal, and reactor siting. The committee also guides or produces advisory studies and reports on problem areas in rock mechanics. A new panel under the auspices of the US National Committee for Rock Mechanics has been appointed to conduct a study on Conceptual Models of Fluid Infiltration in Fractured Media. The study has health and environmental applications related to the underground flow of pollutants through fractured rock in and around mines and waste repositories. Support of the study has been received from the US Nuclear Regulatory Commission and the Department of Energy`s Yucca Mountain Project Office. The new study builds on the success of a recent USNC/RM report entitled Rock Fractures and Fluid Flow: Contemporary Understanding and Applications (National Academy Press, 1996, 551 pp.). A summary of the new study is provided.

1998-09-01T23:59:59.000Z

127

Estimation of hydraulic properties and development of a layered conceptual model for the Snake River plain aquifer at the Idaho National Engineering Laboratory, Idaho  

SciTech Connect

The Idaho INEL Oversight Program, in association with the University of Idaho, Idaho Geological Survey, Boise State University, and Idaho State University, developed a research program to determine the hydraulic properties of the Snake River Plain aquifer and characterize the vertical distribution of contaminants. A straddle-packer was deployed in four observation wells near the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Pressure transducers mounted in the straddle-packer assembly were used to monitor the response of the Snake River Plain aquifer to pumping at the ICPP production wells, located 2600 to 4200 feet from the observation wells. The time-drawdown data from these tests were used to evaluate various conceptual models of the aquifer. Aquifer properties were estimated by matching time-drawdown data to type curves for partially penetrating wells in an unconfined aquifer. This approach assumes a homogeneous and isotropic aquifer. The hydraulic properties of the aquifer obtained from the type curve analyses were: (1) Storativity = 3 x 10{sup -5}, (2) Specific Yield = 0.01, (3) Transmissivity = 740 ft{sup 2}/min, (4) Anisotropy (Kv:Kh)= 1:360.

Frederick, D.B.; Johnson, G.S.

1996-02-01T23:59:59.000Z

128

Improving Performance and Quality of Working Life: A Model for Organizational Health  

E-Print Network (OSTI)

Improving Performance and Quality of Working Life: A Model for Organizational Health Assessment of organizational health blends the pursuit of individual wellness with organiza- tional effectiveness to yield a strategy for economic resilience. This article introduces a novel model for organizational health

Huang, Samuel H.

129

An evolving collaborative model of working in students' global software development projects  

Science Conference Proceedings (OSTI)

This paper describes the evolution of the collaborative model of working of our annual global software development project that started in 2005. The global software development project unites students from up to five countries with different roles to ... Keywords: agile methodologies, communication, global software development, scrum, software engineering

Christelle Scharff

2011-05-01T23:59:59.000Z

130

Work Costs and Nonconvex Preferences in the Estimation of Labor Supply Models  

E-Print Network (OSTI)

We first critique the manner in which work costs have been introduced into labor supply estimation, and note the difficulty of incorporating a realistic rendering of the costs of work. We then show that, if work costs are not acounted for in the budget and time constraints in a structural labor supply model, they will be subsumed into the data generating preferences. We show that even if underlying preferences over consumption and leisure are convex, the presence of unobservable work costs can make these preferences appear nonconvex. Absent strong functional form assumptions, these work costs are not identified in data commonly used for labor supply estimation. However, we show that even if work costs cannot be separately identified, policy relevant calculations, such as estimates of the effect of tax changes on labor supply and deadweight loss calculations, are not affected by the fact that estimated preferences incorporate work costs. We would like to thank Joe Altonji and Chris Taber for valuable conversations, and seminar participants

Bradley T. Heim; Bruce D. Meyer

2004-01-01T23:59:59.000Z

131

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Safety Design Review Module Conceptual Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF C C CD-1 F ENVIRO Standard R Conceptua Rev Critical Decis CD-2 M ONMENTAL Review Plan al Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital

132

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Design Review Module Conceptual Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Concep Rev Critical Decis CD-2 M ONMENTAL Review Plan ptual De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) sign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

133

How does the brain work?  

NLE Websites -- All DOE Office Websites (Extended Search)

Conceptually though it's a widget to get folks from where they live to where they work, and it works by figuring out the paths they take, assigning trains to those routes,...

134

Electric and Magnetic Fields (EMF) RAPID Engineering Program, Project 7: Development of Field Exposure Models  

Science Conference Proceedings (OSTI)

The purpose of this project was to develop a conceptual model for estimating magnetic field (EMF) personal exposure (PE) of individuals or groups and construct a working model using existing data.

Bracken, T.D.; Rankin, R.F.; Wiley, J.A.

1999-05-01T23:59:59.000Z

135

Working Group Reports Calibration of Radiation Codes Used in Climate Models:  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group Reports Calibration of Radiation Codes Used in Climate Models: Comparison of Clear-Sky Calculations with Observations from the Spectral Radiation Experiment and the Atmospheric Radiation Measurement Program R. G. Ellingson, S. Shen, and J. Warner University of Maryland College Park, Maryland Background The InterComparison of Radiation Codes in Climate Models (ICRCCM) showed large differences between model calculations of longwave fluxes and heating rates-even for clear-sky conditions (Luther et al. 1988). The discrepancies could not be resolved with either pyrgeometer measurements or line-by-line calculations because * Pyrgeometer errors are the magnitude of the discrepancies. * Uncertainties in the physics of line wings and in the proper treatment of the continuum make it impossible

136

Modeling surfaces in the context of pulsed-power : work functions, electron emission and dynamic response.  

SciTech Connect

The ability to quickly understand and deal with issues on ZR, or to virtually design a future ZX accelerator, requires a physics-based capability to simulate all key pulsed power components. Highly important for gas switches and transmission lines are surface phenomena: thermionic emission, photoemission, field emission, and ion-surface dynamics. These are complex processes even at normal conditions, when coupled to the dynamic environment in pulsed power components, the current state of the art of understanding is not at the level of science based predictive modeling. Modeling efforts at the macroscopic level (finite element based hydrodynamic simulations) require detailed information of these processes to yield more reliable results. This is the final report of an LDRD project in the science of extreme environments investment area; the project was focused on describing the physics of surfaces of materials of interest in pulsed-power components. We have calculated the temperature dependence of work functions for metals from first principles using density functional theory (DFT) as well as investigated the effect of initial oxidation and alloying. By using the GW method, we have gone beyond DFT to calculate work functions for Al. The GW work required base-lining the GW results for different systems, since GW lacks a description of total energy. Lastly, we investigated the more macroscopic physics of how a surface and bulk material responds to a very high current under a short time, representative for current loads in pulsed-power components, with emphasis on materials modeling. These simulations were made using two hydrodynamic codes, ALEGRA and MACH2, in order to focus on the materials models themselves.

Cochrane, Kyle Robert (Ktech Corporation, Albuquerque, NM); Chantrenne, Sophie (SAIC, Albuquerque, NM); Mattsson, Thomas Kjell Rene; Faleev, Sergey V. (SNAMI Inc., AL)

2009-09-01T23:59:59.000Z

137

Working Group Reports Summary of Single-Column Model Intensive Observation  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group Reports Summary of Single-Column Model Intensive Observation Period Workshop at Annual Atmospheric Radiation Measurement Science Team Meeting D. A. Randall Department of Atmospheric Science Colorado State University Fort Collins, Colorado R. T. Cederwall Lawrence Livermore National Laboratory Livermore, California * Study previous observation simulation system experiments (OSSEs) (i.e., Bill Frank, Pennsylvania State University [PSU]) and conduct OSSEs as necessary to evaluate data network. * Implement additional "boundary" facilities and investigate possible interim capabilities for upcoming SCM IOPs. * Improve resolution of wind profiles observed in lowest 1 km, using data sources such as towers of opportunity, doppler sodar, and doppler radar.

138

CONCEPTUAL DESIGN REPORT  

Science Conference Proceedings (OSTI)

Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories.

ROBINSON,K.

2006-12-31T23:59:59.000Z

139

How the Spallation Neutron Source Works | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

How SNS Works SNS conceptual drawing Conceptual layout of the SNS facility. At full power, SNS will deliver 1.4 million watts (1.4 MW) of beam power onto the target. SNS was...

140

Assessment of effectiveness of geologic isolation systems. A conceptual simulation model for release scenario analysis of a hypothetical site in Columbia Plateau Basalts  

SciTech Connect

This report is a status report for an evolving methodology for release scenario development for underground nuclear waste repositories. As such, it is intended for use as a reference point and a preliminary description of an evolving geoscience methodology. When completed this methodology will be used as a tool in developing disruptive release scenarios for analyzing the long-term safety of geological nuclear waste repositories. While a basalt environment is used as an example, this report is not intended to reflect an actual site safety assessment for a repository in a media. It is rather intended to present a methodology system framework and to provide discussions of the geological phenomena and parameters that must be addressed in order to develop a methodology for potential release scenarios. It is also important to note that the phenomena, their interrelationships, and their relative importance along with the overall current structure of the model will change as new geological information is gathered through additional peer review, geotechnical input, site specific field work, and related research efforts.

Stottlemyre, J.A.; Petrie, G.M.; Benson, G.L.; Zellmer, J.T.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

A Conceptual Framework for Progressing Towards Sustainability...  

Open Energy Info (EERE)

Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector Jump to: navigation, search Logo: A Conceptual Framework for Progressing Towards...

142

NSLS-II Conceptual Design Report (CDR)  

NLE Websites -- All DOE Office Websites (Extended Search)

Conceptual Design Report NSLS-II CDR cover Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron...

143

Conceptual Spawning Habitat Model to Aid in ESA Recovery Plans for Snake River Fall Chinook Salmon, 2002-2003 Annual Report.  

DOE Green Energy (OSTI)

The goal of this project is to develop a spawning habitat model that can be used to determine the physical habitat factors that are necessary to define the production potential for fall chinook salmon that spawn in large mainstem rivers like the Columbia River's Hanford Reach and Snake River. This project addresses RPA 155 in the NMFS 2000 Biological Opinion: Action 155: BPA, working with BOR, the Corps, EPA, and USGS, shall develop a program to: (1) Identify mainstem habitat sampling reaches, survey conditions, describe cause-and-effect relationships, and identify research needs; (2) Develop improvement plans for all mainstem reaches; and (3) Initiate improvements in three mainstem reaches. During FY 2003 we continued to collect and analyze information on fall chinook salmon spawning habitat characteristics in the Hanford Reach that will be used to address RPA 155, i.e., items 1-3 above. For example, in FY 2003: (1) We continued to survey spawning habitat in the Hanford Reach and develop a 2-dimensional hydraulic and habitat model that will be capable of predicting suitability of fall chinook salmon habitat in the Hanford Reach; (2) Monitor how hydro operations altered the physical and chemical characteristics of the river and the hyporheic zone within fall chinook salmon spawning areas in the Hanford Reach; (3) Published a paper on the impacts of the Columbia River hydroelectric system on main-stem habitats of fall chinook salmon (Dauble et al. 2003). This paper was made possible with data collected on this project; (4) Continued to analyze data collected in previous years that will ultimately be used to identify cause-and-effect relationships and identify research needs that will assist managers in the improvement of fall chinook habitat quality in main-stem reaches. During FY 2004 we plan to: (1) Complete preliminary reporting and submit papers based on the results of the project through FY 2004. Although we have proposed additional analysis of data be conducted in FY 2005, we anticipate a significant number of key papers being prepared and submitted in FY 2004 which will go toward identifying the data gaps this RPA is intended to address; (2) Make available data from this project for use on Project 2003-038-00 ('Evaluate restoration potential of Snake River fall chinook salmon') which is a BPA-funded project that will start in FY 2004; and (3) Present results of our work at regional and national meetings in order to facilitate technology transfer and information sharing. The objective of this project is to define the production potential of fall chinook salmon that spawn in the Hanford Reach. We will provide fisheries and resource managers with the information they need to determine if the Hanford Reach fall chinook salmon population is indeed healthy, and whether this population will be capable of seeding other satellite populations in the future. We will accomplish this purpose by continuing our on-going research at determining the carrying capacity of the Hanford Reach for producing fall chinook salmon under current operational scenarios, and then begin an assessment of whether the Reach is functioning as a model of a normative river as is widely believed. The product of our research will be a better understanding of the key habitat features for mainstem populations of anadromous salmonids, as well as a better understanding of the measures that must be taken to ensure long-term protection of the Hanford Reach fall chinook population. Although the project was originally funded in FY 1994, it was significantly redefined in FY 2000. At that time five tasks were proposed to accomplish the project objective. The purpose of this progress report is to briefly describe the activities that have been completed on each of the five tasks from FY 2000 through FY 2003.

Geist, David (Pacific Northwest National Laboratory)

2005-09-01T23:59:59.000Z

144

A multiobjective, multidisciplinary design optimization methodology for the conceptual design of distributed satellite systems  

E-Print Network (OSTI)

A multiobjective, multidisciplinary design optimization methodology for mathematically modeling the distributed satellite system (DSS) conceptual design problem as an optimization problem has been developed to advance the ...

Jilla, Cyrus D., 1974-

2002-01-01T23:59:59.000Z

145

Investigation of the Thermal Stability of Irradiation and Cold Work Defects in Zirconium-based Model Alloys: 2011 Progress Report  

Science Conference Proceedings (OSTI)

This report covers the work performed in 2011 on the thermal stability of irradiation and strain hardening defects in several zirconium-based model alloys with low niobium content. The work involves various tests and measurements on tubular or plate specimens irradiated in the Russian BOR-60 reactor.

2012-06-06T23:59:59.000Z

146

Investigation of the Thermal Stability of Irradiation and Cold Work Defects in Zirconium-based Model Alloys  

Science Conference Proceedings (OSTI)

This report covers the work performed in 2010 on the thermal stability of irradiation and strain hardening defects in zirconium-based model alloys with low niobium content. The work involves various tests and measurements on tubular or plate specimens irradiated in the Russian BOR-60 reactor.

2011-07-13T23:59:59.000Z

147

Investigation of the Thermal Stability of Irradiation and Cold Work Defects in Zirconium-based Model Alloys  

Science Conference Proceedings (OSTI)

This report describes the work performed in 2009 on the thermal stability of irradiation and strain hardening defects in zirconium-based model alloys with low niobium content. The work involves various tests and measurements on tubular or plate specimens irradiated in the Russian BOR-60 reactor.

2010-05-17T23:59:59.000Z

148

Conceptual design of a solar cogeneration facility at Pioneer Mill Co. , Ltd  

DOE Green Energy (OSTI)

Results are reported of a conceptual design study of the retrofit of a solar central receiver system to an existing cogeneration facility at a Hawaii raw sugar factory. Background information on the site, the existing facility, and the project organization is given. Then the results are presented o the work to select the site specific configuration, including the working fluid, receiver concept, heliostat field site, and the determination of the solar facility size and of the role of thermal storage. The system selected would use water-steam as its working fluid in a twin-cavity receiver collecting sunlight from 41,420 m/sup 2/ of heliostat mirrors. The lates version of the system specification is appended, as are descriptions of work to measure site insolation and a site insolation mathematical model and interface data for the local utility. (LEW)

Not Available

1981-04-01T23:59:59.000Z

149

SST–North American Hydroclimate Links in AMIP Simulations of the Drought Working Group Models: A Proxy for the Idealized Drought Modeling Experiments  

Science Conference Proceedings (OSTI)

The present study assesses the potential of the U.S. Climate Variability and Predictability (CLIVAR) Drought Working Group (DWG) models in simulating interannual precipitation variability over North America, especially the Great Plains. It also ...

Alfredo Ruiz-Barradas; Sumant Nigam

2010-05-01T23:59:59.000Z

150

Modeling neuropathologies as disruption of normal sequence generation in working memory networks  

Science Conference Proceedings (OSTI)

Recurrent networks of cortico-cortical connections have been implicated as the substrate of working memory persistent activity, and patterned sequenced representation as needed in cognitive function. We examine the pathological behavior which may result ... Keywords: Epilepsy, Obsessive compulsive disorder, Schizophrenia, Sequences, Working memory

Sergio Verduzco-Flores; Bard Ermentrout; Mark Bodner

2012-03-01T23:59:59.000Z

151

Jobs and Economic Development Impacts from Small Wind: JEDI Model in the Works (Presentation)  

DOE Green Energy (OSTI)

This presentation covers the National Renewable Energy Laboratory's role in economic impact analysis for wind power Jobs and Economic Development Impacts (JEDI) models, JEDI results, small wind JEDI specifics, and a request for information to complete the model.

Tegen, S.

2012-06-01T23:59:59.000Z

152

Cross-Language High Similarity Search Using a Conceptual Thesaurus  

E-Print Network (OSTI)

Cross-Language High Similarity Search Using a Conceptual Thesaurus Parth Gupta, Alberto Barr Universitat Polit`ecnica de Val`encia, Spain {pgupta,lbarron,prosso}@dsic.upv.es http://www.dsic.upv.es/grupos/nle Abstract. This work addresses the issue of cross-language high similarity and near-duplicates search, where

Rosso, Paolo

153

Impact of Enthalpy-Based Ensemble Filtering Sea Ice Data Assimilation on Decadal Predictions: Simulation with a Conceptual Pycnocline Prediction Model  

Science Conference Proceedings (OSTI)

The non-Gaussian probability distribution of sea ice concentration makes it difficult to directly assimilate sea ice observations into a climate model. Because of the strong impact of the atmospheric and oceanic forcing on the sea ice state, any ...

S. Zhang; M. Winton; A. Rosati; T. Delworth; B. Huang

2013-04-01T23:59:59.000Z

154

Developing a Process-Oriented Notation for Modeling Operational Risks - A Conceptual Metamodel Approach to Operational Risk Management in Knowledge Intensive Business Processes within the Financial Industry  

Science Conference Proceedings (OSTI)

According to the Basel II committee operational risks are the least understood and manageable risks in banks. Operational risks in banks are closely linked to the underlying business process landscape. Recently, researchers have suggested to model this ...

Burkhard Weiss; Axel Winkelmann

2011-01-01T23:59:59.000Z

155

MINIMARS conceptual design: Final report  

DOE Green Energy (OSTI)

This volume contains the following sections: (1) fueling systems; (2) blanket; (3) alternative blanket concepts; (4) halo scraper/direct converter system study and final conceptual design; (5) heat-transport and power-conversion systems; (6) tritium systems; (7) minimars air detritiation system; (8) appropriate radiological safety design criteria; and (9) cost estimate. (MOW)

Lee, J.D. (ed.)

1986-09-01T23:59:59.000Z

156

EEMIS data sector correspondence with conceptual database design  

SciTech Connect

The purpose of this report is fivefold: (1) it provides an introduction to database systems and critieria that are important in the selection of a commercial database management system; (2) it demonstrates that the mapping of the EEMIS data sector structure into the conceptual database model is complete and preserves the hierarchies implied by the EEMIS data structure; (3) it describes all fields and associated field lengths; (4) it provides accurate formulae for estimating the computer storage requirements for the conceptual models at the facility level; and (5) it provides the details of the storage requirements for oil refineries, petroleum crude storage facilities, natural gas transmission and distribution facilities, and company description records.

Croteau, K; Kydes, A S; Maier, D

1979-07-01T23:59:59.000Z

157

Microgrid: A Conceptual Solution  

E-Print Network (OSTI)

Abstract — Application of individual distributed generators can cause as many problems as it may solve. A better way to realize the emerging potential of distributed generation is to take a system approach which views generation and associated loads as a subsystem or a “microgrid”. During disturbances, the generation and corresponding loads can separate from the distribution system to isolate the microgrid’s load from the disturbance (providing UPS services) without harming the transmission grid’s integrity. This ability to island generation and loads together has a potential to provide a higher local reliability than that provided by the power system as a whole. In this model it is also critical to be able to use the waste heat by placing the sources near the heat load. This implies that a unit can be placed at any point on the electrical system as required by the location of the heat load.

Robert H. Lasseter; Paolo Piagi

2004-01-01T23:59:59.000Z

158

Don’t Work, Work at Home, or Commute? Discrete Choice Models of the Decision for San Francisco Bay Area Residents  

E-Print Network (OSTI)

more detailed information about conditions at home (e.g.is the home large enough to hold an office? ) and theTime Bind: When Work Becomes Home and Home Becomes Work. New

Ory, D T; Mokhtarian, Patricia L

2005-01-01T23:59:59.000Z

159

Don't Work, Work at Home, or Commute? Discrete Choice Models of the Decision for San Francisco Bay Area Residents  

E-Print Network (OSTI)

more detailed information about conditions at home (e.g.is the home large enough to hold an office? ) and theTime Bind: When Work Becomes Home and Home Becomes Work. New

Mokhtarian, Patricia L; Ory, David T

2005-01-01T23:59:59.000Z

160

Specification of history based constraints for access control in conceptual level  

Science Conference Proceedings (OSTI)

An access control model for Semantic Web should take the semantic relationships among the entities, defined in the abstract conceptual level (i.e., ontology level), into account. Authorization and policy specification based on a logical model let us ...

Fathiyeh Faghih; Morteza Amini; Rasool Jalili

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Theoretical foundations for knowledge-based conceptual design of complex systems  

Science Conference Proceedings (OSTI)

The theoretical foundations that were developed and validated in a research work in order to the conceptual design systematizing of complex systems or processes, are presented in this paper. From the earliest design stages, two approaches of concurrent ...

Heriberto Maury Ramírez; Carles Riba Romeva

2005-09-01T23:59:59.000Z

162

Conceptual design of retrieval systems for emplaced transuranic waste containers in a salt bed depository. Final report  

Science Conference Proceedings (OSTI)

The US Department of Energy and the Nuclear Regulatory Commission have jurisdiction over the nuclear waste management program. Design studies were previously made of proposed repository site configurations for the receiving, processing, and storage of nuclear wastes. However, these studies did not provide operational designs that were suitable for highly reliable TRU retrieval in the deep geologic salt environment for the required 60-year period. The purpose of this report is to develop a conceptual design of a baseline retrieval system for emplaced transuranic waste containers in a salt bed depository. The conceptual design is to serve as a working model for the analysis of the performance available from the current state-of-the-art equipment and systems. Suggested regulations would be based upon the results of the performance analyses.

Fogleman, S.F.

1980-04-01T23:59:59.000Z

163

Conceptual designs for a long term {sup 238}PuO{sub 2} storage vessel  

Science Conference Proceedings (OSTI)

This is a report on conceptual designs for a long term, 250 years, storage container for plutonium oxide ([sup 238]PuO[sub 2]). These conceptual designs are based on the use of a quartz filter to release the helium generated during the plutonium decay. In this report a review of filter material selection, design concepts, thermal modeling, and filter performance are discussed.

Kwon, D.M.; Replogle, W.C.

1996-08-01T23:59:59.000Z

164

Final Project Report - Coupled Biogeochemical Process Evaluation for Conceptualizing Trichloriethylene Co-Metabolism: Co-Metabolic Enzyme Activity Probes and Modeling Co-Metabolism and Attenuation  

Science Conference Proceedings (OSTI)

Trichloroethene (TCE) (also known as trichloroethylene) is a common contaminant in groundwater. TCE is regulated in drinking water at a concentration of 5 µg/L, and a small mass of TCE has the potential to contaminant large volumes of water. The physical and chemical characteristics of TCE allow it to migrate quickly in most subsurface environments, and thus large plumes of contaminated groundwater can form from a single release. The migration and persistence of TCE in groundwater can be limited by biodegradation. TCE can be biodegraded via different processes under either anaerobic or aerobic conditions. Anaerobic biodegradation is widely recognized, but aerobic degradation is less well recognized. Under aerobic conditions, TCE can be oxidized to non hazardous conditions via cometabolic pathways. This study applied enzyme activity probes to demonstrate that cometabolic degradation of TCE occurs in aerobic groundwater at several locations, used laboratory microcosm studies to determine aerobic degradation rates, and extrapolated lab-measured rates to in situ rates based on concentrations of microorganisms with active enzymes involved in cometabolic TCE degradation. Microcosms were constructed using basalt chips that were inoculated with microorganisms to groundwater at the Idaho National Laboratory Test Area North TCE plume by filling a set of Flow-Through In Situ Reactors (FTISRs) with chips and placing the FTISRs into the open interval of a well for several months. A parametric study was performed to evaluate predicted degradation rates and concentration trends using a competitive inhibition kinetic model, which accounts for competition for enzyme active sites by both a growth substrate and a cometabolic substrate. The competitive inhibition kinetic expression was programmed for use in the RT3D reactive transport package. Simulations of TCE plume evolution using both competitive inhibition kinetics and first order decay were performed.

Starr, Robert C; Orr, Brennon R; Lee, M Hope; Delwiche, Mark

2010-02-26T23:59:59.000Z

165

Integrating Bioenergy into Computable General Equilibrium Models – A Survey. Kiel Working Paper 1473. Kiel Institute for the World  

E-Print Network (OSTI)

Abstract: In the past years biofuels have received increased attention since they were believed to contribute to rural development, energy security and to fight global warming. It became clear, though, that bioenergy cannot be evaluated independently of the rest of the economy and that national and international feedback effects are important. Computable general equilibrium (CGE) models have been widely employed in order to study the effects of international climate policies. The main characteristic of these models is their encompassing scope: Global models cover the whole world economy disaggregated into regions and countries as well as diverse sectors of economic activity. Such a modelling framework unveils direct and indirect feedback effects of certain policies or shocks across sectors and countries. CGE models are thus well suited for the study of bioenergy/biofuel policies. One can currently find various approaches in the literature of incorporating bioenergy into a CGE framework. This paper gives an overview of existing approaches, critically assesses their respective power and discusses the advantages of CGE models compared to partial equilibrium models. Grouping different approaches into categories and highlighting their advantages and disadvantages is important for giving a structure to this rather recent and rapidly growing research area and to provide a guidepost for future work.

Bettina Kretschmer; Bettina Kretschmer; Sonja Peterson; Bettina Kretschmer; Sonja Peterson

2008-01-01T23:59:59.000Z

166

Probabilistic modeling of the corrosion of steel structures in marine water-development works  

Science Conference Proceedings (OSTI)

Considering that corrosion takes place as a random process over time, a a probabilistic approach was utilized in this paper. The corrosion of metallic sheet piling employed in the fascia wall of a bulwerk is considered as an example. A stochastic model is constructed on the base of a modified Weibull distribution function with consideration of parameters of the corrosion process as a function of time. One of the factors defining the corrosion rate of the sheet piling is the degree of access of a section of the wall to the zone of variable water level, or the underwater zone. The type of corrosion-continuous or local-is another factor. The accuracy of corrosion prediction in the underwater zone is higher than that in the zone of variable water level.

Bekker, A. T.; Lyubimov, V. S.; Kovalenko, R. G.; Aleksandrov, A. V.

2011-09-15T23:59:59.000Z

167

GCFR steam generator conceptual design  

SciTech Connect

The gas-cooled fast reactor (GCFR) steam generators are large once-through heat exchangers with helically coiled tube bundles. In the GCFR demonstration plant, hot helium from the reactor core is passed through these units to produce superheated steam, which is used by the turbine generators to produce electrical power. The paper describes the conceptual design of the steam generator. The major components and functions of the design are addressed. The topics discussed are the configuration, operating conditions, design criteria, and the design verification and support programs.

Holm, R.A.; Elliott, J.P.

1980-01-01T23:59:59.000Z

168

Preliminary conceptual design of commercial geopressured geothermal fuel plants  

SciTech Connect

Previous feasibility studies Bechtel (1975), TRW (1975) for electric power generation utilizing geothermal resources have tended to focus primarily on the power plant and have neglected the fuel production and effluent disposal facilities. The Dow Chemical USA study (1974) for the Governor's Energy Advisory Council, State of Texas, placed equal emphasis on the power plant and the fuel plant. The study reported in Chapter II and in what follows in this chapter, also places equal emphasis on the two types of facilities. It is important that the fuel plant, the well field, the fuel processing plant, and the effluent disposal facility be the subject of a preliminary conceptual design and costing activity so that economic and net energetics analysis can be performed. The activity also serves to assess technological maturity of the fuel plant and to identify technical problems requiring further study. The resource considered was the model resource outlined in Sectio B, Chapter II. Fuel plants were outlined for three power generation plants: single-stage flash steam, two-stage flash steam, and propane secondary working fluid plant.

Underhill, Gary K.; Carlson, Ronald A.; Clendinning, William A.; Erdos, Jozsef, Erdos; Gault, John; Hall, James W.; Jones, Robert L.; Michael, Herbert K.; Powell, Paul H.; Riemann, Carl F.; Rios-Castellon, Lorenzo; Shepherd, Burchard P.; Wilson, John S.

1976-01-01T23:59:59.000Z

169

Automated energy model creation for conceptual design  

Science Conference Proceedings (OSTI)

Architects today rarely use whole building energy analysis to inform their early design process. During this stage of design, the team is responsible for macro-level decisions (such as basic form and orientation) that can have the most significant effects ... Keywords: building performance simulation, design process, whole building energy analysis

Lillian Smith; Kyle Bernhardt; Matthew Jezyk

2011-04-01T23:59:59.000Z

170

TREC-3: Experience With Conceptual Relations in ...  

Science Conference Proceedings (OSTI)

... Britain, France, USSR, India, or China to control ... fighting drugs to market, from conceptualization to ... orcompany responsible for the drug project, the ...

171

TB-14 Section 4 - Conceptual Design Review  

NLE Websites -- All DOE Office Websites (Extended Search)

requirements of the beamlines in a sector. All members of a Collaborative Access Team (CAT) should be involved in the development of the conceptual design because the primary...

172

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

173

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

174

Conceptual Drawing CMRR Facility Past  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Volume 1 Volume 1 Chapters 1 through 10 Appendices A through D To submit questions regarding this CMRR-NF SEIS, or to request a copy, please contact: AVAILABILITY OF THE FINAL SUPPLEMENTAL ENVIRONMENTAL IMPACT STATEMENT FOR THE NUCLEAR FACILITY PORTION OF THE CHEMISTRY AND METALLURGY RESEARCH BUILDING REPLACEMENT PROJECT AT LOS ALAMOS NATIONAL LABORATORY, LOS ALAMOS, NEW MEXICO (CMRR-NF SEIS) Printed with soy ink on recycled paper John Tegtmeier, EIS Document Manager Los Alamos Site Office National Nuclear Security Administration U.S. Department of Energy 3747 West Jemez Road Los Alamos, NM 87544 Telephone: 505-665-0113 Conceptual Drawing CMRR Facility Past Present Future Past Final Supplemental Environmental Impact Statement for the

175

Ocean thermal energy conversion (OTEC) power system development. Conceptual design  

DOE Green Energy (OSTI)

The conceptual design of a power system for application to the OTEC 100-MWe Demonstration Plant is presented. System modeling, design, and performance are described in detail. Materials considerations, module assembly, and cost considerations are discussed. Appendices include: A) systems analysis, B) general arrangements, C) system equipment, D) ammonia system material considerations; E) ammonia cycle, F) auxiliary subsystems, G) DACS availability analysis, H) heat exchanger supporting data, I) rotating machinery, and J) platform influences. (WHK)

Not Available

1978-01-30T23:59:59.000Z

176

Technical Report Confirms Reliability of Yucca Mountain Technical Work |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Report Confirms Reliability of Yucca Mountain Technical Technical Report Confirms Reliability of Yucca Mountain Technical Work Technical Report Confirms Reliability of Yucca Mountain Technical Work February 17, 2006 - 11:59am Addthis WASHINGTON, DC - The Department of Energy's Office of Civilian Radioactive Waste Management (OCRWM) today released a report confirming the technical soundness of infiltration modeling work performed by U.S. Geological Survey (USGS) employees. "The report makes clear that the technical basis developed by the USGS has a strong conceptual foundation and is corroborated by independently-derived scientific conclusions, and provides a solid underpinning for the 2002 site recommendation," said OCRWM's Acting Director Paul Golan. "We are committed to opening Yucca Mountain based only on sound science. The work

177

Category:Modeling Techniques | Open Energy Information  

Open Energy Info (EERE)

in this category, out of 5 total. A Analytical Modeling C Conceptual Model M Modeling-Computer Simulations N Numerical Modeling P Portfolio Risk Modeling Retrieved from "http:...

178

THERMO-HYDRO-MECHANICAL MODELING OF WORKING FLUID INJECTION AND THERMAL ENERGY EXTRACTION IN EGS FRACTURES AND ROCK MATRIX  

DOE Green Energy (OSTI)

Development of enhanced geothermal systems (EGS) will require creation of a reservoir of sufficient volume to enable commercial-scale heat transfer from the reservoir rocks to the working fluid. A key assumption associated with reservoir creation/stimulation is that sufficient rock volumes can be hydraulically fractured via both tensile and shear failure, and more importantly by reactivation of naturally existing fractures (by shearing), to create the reservoir. The advancement of EGS greatly depends on our understanding of the dynamics of the intimately coupled rock-fracture-fluid-heat system and our ability to reliably predict how reservoirs behave under stimulation and production. Reliable performance predictions of EGS reservoirs require accurate and robust modeling for strongly coupled thermal-hydrological-mechanical (THM) processes. Conventionally, these types of problems have been solved using operator-splitting methods, usually by coupling a subsurface flow and heat transport simulators with a solid mechanics simulator via input files. An alternative approach is to solve the system of nonlinear partial differential equations that govern multiphase fluid flow, heat transport, and rock mechanics simultaneously, using a fully coupled, fully implicit solution procedure, in which all solution variables (pressure, enthalpy, and rock displacement fields) are solved simultaneously. This paper describes numerical simulations used to investigate the poro- and thermal- elastic effects of working fluid injection and thermal energy extraction on the properties of the fractures and rock matrix of a hypothetical EGS reservoir, using a novel simulation software FALCON (Podgorney et al., 2011), a finite element based simulator solving fully coupled multiphase fluid flow, heat transport, rock deformation, and fracturing using a global implicit approach. Investigations are also conducted on how these poro- and thermal-elastic effects are related to fracture permeability evolution.

Robert Podgorney; Chuan Lu; Hai Huang

2012-01-01T23:59:59.000Z

179

Semantology as basis for conceptual knowledge processing  

Science Conference Proceedings (OSTI)

Semantology has been introduced as the theory of semantic structures and their connections which, in particular, covers the methodology of activating semantic structures for representing conceptual knowledge. It is the main aim of this paper to explain ...

Peter Eklund; Rudolf Wille

2007-02-01T23:59:59.000Z

180

Conceptual Phase Structural Design Tool for Microsatellites  

E-Print Network (OSTI)

Gaining traction or momentum in the conceptual design phase for a complex system can be an arduous and daunting process, whether the complex system being designed is a satellite, airplane, car, or one of countless other ...

McLinko, Ryan (Ryan M.)

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Conceptual design. Final report: TFE Verification Program  

DOE Green Energy (OSTI)

This report documents the TFE Conceptual Design, which provided the design guidance for the TFE Verification program. The primary goals of this design effort were: (1) establish the conceptual design of an in-core thermionic reactor for a 2 Mw(e) space nuclear power system with a 7-year operating lifetime; (2) demonstrate scalability of the above concept over the output power range of 500 kW(e) to 5 MW(e); and (3) define the TFE which is the basis for the 2 MW (e) reactor design. This TFE specification provided the basis for the test program. These primary goals were achieved. The technical approach taking in the conceptual design effort is discussed in Section 2, and the results are discussed in Section 3. The remainder of this introduction draws a perspective on the role that this conceptual design task played in the TFE Verification Program.

Not Available

1994-03-01T23:59:59.000Z

182

Empirical Study of MacroBIM and Conceptual Estimation  

E-Print Network (OSTI)

Building Information Modeling (BIM) has set up a mark in the construction industry over a decade. In order to gain benefit of BIM in estimating the project cost at the early stage of construction with the limited data available, a new concept of MacroBIM has been introduced in the industry. However, limited amount of research has been implemented to determine how MacroBIM has been accepted in the construction industry. Most research was focused on the accuracy of the conceptual estimation. This research attempted to determine the effectiveness of MacroBIM process applied at early stages of construction for conceptual cost estimation. Experts from the discipline of architecture, contractor and owners were interviewed and their professional opinions on MacroBIM were analyzed using grounded theory. The results show that, compared to the traditional conceptual estimating process, MacroBIM is an effective method for 1) saving labor hours, 2) conveying assumptions with the help of its visualization capabilities, 3) enhancing the collaboration among the project participants, and 4) evaluating multiple design scenarios. However, fear of using MacroBIM and trust in its outcome existed among some contractors, architects, and owners because this technology has not matured yet. Moreover, the need of interoperability between the MacroBIM tools and MicroBIM tools, such as Revit, has also surfaced in the study.

Gajbhiye, Anand Dhanraj

2010-05-01T23:59:59.000Z

183

DDE-MURR Status Report of Conceptual Design Activities  

SciTech Connect

The Design Demonstration Experiment for the University of Missouri Research Reactor (DDE-MURR) is intended to facilitate Low Enriched Uranium (LEU) conversion of the MURR by demonstrating the performance and fabrication of the LEU fuel element design through an irradiation test in a 200mm channel at the Belgium Reactor 2 (BR2). Revision 0 of this report was prepared at the end of government fiscal year 2012 when most of the resources for furthering DDE design work were expected to be postponed. Hence, the conceptual design efforts were summarized to provide the status of key objectives, notable results, and provisions for future design work. Revision 1 of this report was prepared at the end of fiscal year 2013 in order to include results from a neutronic study performed by BR2, to incorporate further details that had been achieved in the engineering sketches of the irradiation devices, and to provide an update of the DDE-MURR campaign in relation to program objectives and opportunities for its eventual irradiation. These updates were purposed to bring the DDE-MURR conceptual design to level of maturity similar to that of the other two DDE efforts (DDE-MITR and DDE-NBSR). This report demonstrates that the DDE-MURR design effort is well on the path to producing a suitable irradiation experiment, but also puts forth several recommendations in order to facilitate success of the irradiation campaign.

N.E. Woolstenhulme; R.B. Nielson; M.H. Sprenger; G.K. Housley

2013-09-01T23:59:59.000Z

184

DDE-NBSR Status Report of Conceptual Design Activities  

Science Conference Proceedings (OSTI)

The Design Demonstration Experiment for the National Bureau of Standard Reactor (DDE-NBSR) is intended to facilitate Low Enriched Uranium (LEU) conversion of the NBSR by demonstrating the performance and fabrication of the LEU fuel element design through an irradiation test in the Advanced Test Reactor center flux trap. At the time this report was prepared the resources for furthering DDE design work were expected to be postponed. As such, the conceptual design effort to date is summarized herein in order to provide the status of key objectives, notable results, and provisions for future design work. These demonstrate that the DDE-NBSR design effort is well on the path to producing a suitable irradiation experiment, but also exhibits several challenges for which timely resolution is recommend in order to facilitate success of the irradiation campaign and ultimate conversion of the NBSR.

N.E. Woolstenhulme; R.B. Nielson; B.P. Durtschi; C.R. Glass; G.A. Roth; D.T. Clark

2012-09-01T23:59:59.000Z

185

DDE-MURR Status Report of Conceptual Design Activities  

Science Conference Proceedings (OSTI)

The Design Demonstration Experiment for the University of Missouri Research Reactor (DDE-MURR) is intended to facilitate Low Enriched Uranium (LEU) conversion of the MURR by demonstrating the performance and fabrication of the LEU fuel element design through an irradiation test in a 200mm channel at the Belgium Reactor 2. At the time this report was prepared the resources for furthering DDE design work were expected to be postponed. As such, the conceptual design effort to date is summarized herein in order to provide the status of key objectives, notable results, and provisions for future design work. These demonstrate that the DDE-MURR design effort is well on the path to producing a suitable irradiation experiment, but also exhibits several challenges for which timely resolution is recommend in order to facilitate success of the irradiation campaign and ultimate conversion of the MURR.

N.E. Woolstenhulme; R.B. Nielson; M.H. Sprenger; G.K. Housley

2012-09-01T23:59:59.000Z

186

DDE-MITR Status Report of Conceptual Design Activities  

Science Conference Proceedings (OSTI)

The Design Demonstration Experiment for the Massachusetts Institute of Technology Reactor (DDE-MITR) is intended to facilitate Low Enriched Uranium (LEU) conversion of the MITR by demonstrating the performance and fabrication of the LEU fuel element design through an irradiation test in the Advanced Test Reactor center flux trap. At the time this report was prepared the resources for furthering DDE design work were expected to be postponed. As such, the conceptual design effort to date is summarized herein in order to provide the status of key objectives, notable results, and provisions for future design work. These demonstrate that the DDE-MITR design effort is well on the path to producing a suitable irradiation experiment, but also exhibits several challenges for which timely resolution is recommend in order to facilitate success of the irradiation campaign and ultimate conversion of the MITR.

N.E. Woolstenhulme; R.B. Nielson; J.D. Wiest; J.W. Nielsen; G.A. Roth; S.D. Snow

2012-09-01T23:59:59.000Z

187

Rapid Risk-Based Evaluation of Competing Conceptual Designs  

SciTech Connect

In this paper, the authors have shown how a qualitative analysis can provide good input to a risk reduction design problem. Traditionally qualitative analyses such as the FMEA can be supplemented by qualitative fault trees and event trees to produce logic models of the accident sequences for the different design options. These models can be compared using rule-based manipulations of qualitative branch point probabilities. A qualitative evaluation of other considerations such as collateral safety effects, operational impacts and worker-safety impacts can provide a more complete picture of the trade-off between options. The authors believe that their risk-reduction analysis approach that combines logic models with qualitative and possibility metrics provides an excellent tool for incorporating safety concerns rapidly and effectively into a conceptual design evaluation.

Bott, T.F.; Butner, J.M.

1999-08-22T23:59:59.000Z

188

Smart Grid Conceptual Actors/Data Flow Diagram- Cross Domain...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Smart Grid Conceptual ActorsData Flow Diagram- Cross Domain Network Focued- Open SGSG-Network TF Smart Grid Conceptual ActorsData Flow Diagram- Cross Domain Network Focued- Open...

189

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

NWP subcontractor personnel work at a number of DOE generator sites where NWP has no direct contractual authority for overall site operations. NWP has therefore negotiated...

190

Conceptual Analysis of Noun Groups in English. Paper submitted to  

E-Print Network (OSTI)

An expectation-based system, NGP, for parsing English noun groups into the Conceptual Dependency representation is described. The system

Anatole V. Gershman

1977-01-01T23:59:59.000Z

191

Conceptual Design of the Chornobyl New Safe Confinement - an Overview  

SciTech Connect

The Object Shelter, constructed over the Chornobyl nuclear power plant that was destroyed by a 1986 accident, is at risk of collapse. The Consortium of Bechtel, Electricité De France, and Battelle, in cooperation with subcontractor ???, recently completed the conceptual design for a New Safe Confinement (NSC) building to reduce Shelter corrosion, to mitigate the consequences of potential collapse, and to enable the safe deconstruction of unstable structures. The arch-shaped NSC will be constructed at a distance from the Shelter to minimize radiation exposure to construction workers, and then slid into place over the Shelter. After sliding, cranes and other tools inside the NSC will be remotely operated for deconstruction of the Shelter. The NSC is designed for a 100-year life. Bechtel designed the arch structure and was responsible for project management functions. Electricité De France designed the foundations and designed deconstruction of the Object Shelter unstable elements. Battelle performed safety analyses and environmental impact assessment. ??? (a consortium of ?I?? [KIEP], ??I?? [NIISK], and ???? [ISTC]), as a working partner in all aspects of the design and analysis processes, was the Ukrainian licensed engineer for conceptual design. The design is currently being reviewed by Ukrainian regulatory authorities. An open international tender for detailed design and construction is anticipated to be announced by the European Bank for Reconstruction and Development in December, 2003, with two-stage bid evaluation beginning in April, 2004.

Kulishenko, Valery N.; Hogg, Charles; Schmieman, Eric A.; Wrona, Matthew W.; Convert, Philippe; Nemchinov, Yuriy I.; Shenderovich, Victor; Shcherbin, Vladimir; Belicard, Pascal; Durst, Bruce M.

2006-05-01T23:59:59.000Z

192

Work Manager  

Science Conference Proceedings (OSTI)

A real-time control system has been developed and deployed nationally to support BT‘s work management programme. This paper traces the history, system architecture, development, deployment and service aspects of this very large programme. Many ...

G. J. Garwood

1997-01-01T23:59:59.000Z

193

Pre-conceptual Design Assessment of DEMO Remote Maintenance  

E-Print Network (OSTI)

EDFA, as part of the Power Plant Physics and Technology programme, has been working on the pre-conceptual design of a Demonstration Power Plant (DEMO). As part of this programme, a review of the remote maintenance strategy considered maintenance solutions compatible with expected environmental conditions, whilst showing potential for meeting the plant availability targets. A key finding was that, for practical purposes, the expected radiation levels prohibit the use of complex remote handling operations to replace the first wall. In 2012/13, these remote maintenance activities were further extended, providing an insight into the requirements, constraints and challenges. In particular, the assessment of blanket and divertor maintenance, in light of the expected radiation conditions and availability, has elaborated the need for a very different approach from that of ITER. This activity has produced some very informative virtual reality simulations of the blanket segments and pipe removal that are exceptionally ...

Loving, A; Sykes, N; Iglesias, D; Coleman, M; Thomas, J; Harman, J; Fischer, U; Sanz, J; Siuko, M; Mittwollen, M; others,

2013-01-01T23:59:59.000Z

194

A system for rapid creation and assessment of conceptual large vehicle designs using immersive virtual reality  

Science Conference Proceedings (OSTI)

Currently, new product concepts are often evaluated by developing detailed virtual part and assembly models with traditional computer aided design (CAD) tools followed by appropriate analyses (e.g., finite element analysis, computational fluid dynamics, ... Keywords: Conceptual design, Product configuration, Virtual reality

Christian Noon; Ruqin Zhang; Eliot Winer; James Oliver; Brian Gilmore; Jerry Duncan

2012-06-01T23:59:59.000Z

195

Bottom/Side Lift Gantry Conceptual Design Rev. 01  

SciTech Connect

The purpose of this task is to update the existing bottom/side lift gantry analysis so that the design is consistent with Enhanced Design Alternative II (EDA II) design constraints listed in the Monitored Geologic Repository Project Description Document (CRWMS M and O 1999a, Section 2.2.1.1, p. 9a). This update is consistent with the requirements of the Technical Guidance Document for License Application Preparation (YMP 1999, Section 6.2.5.1). This update will also take into account the latest available equipment classification and Waste Emplacement/Retrieval System Description Document (SDD) (CRWMS M and O 2000c) requirements. The principal objective of this analysis is to verify that the newly developed bottom/side lift gantry concept continues to be a suitable design concept for the current Monitored Geologic Repository (MGR) design. This analysis includes an examination of the waste package (WP) transfer operation at the emplacement drift transfer dock. In addition, this analysis verifies that the gantry is compatible with the WP transporter, which has been redesigned to handle WPs sitting on pallets (CRWMS M and O 2000a). The scope of this work is to examine the existing analysis and to determine what, if any, modifications to the analysis may be required as a result of additional requirements imposed by the EDA II concept. Then, a revision will be made to the conceptual design accordingly. The analysis will also be revised to show the approximate sizes and locations of the electrical equipment and control cabinets, and to take into account the weight of that equipment in the total gantry weight. The analytical portions of the analysis are revised, as required, to address changes resulting from modifications to the conceptual design or from changes in classification and/or SDD requirements. Finally, the revised conceptual design is evaluated to verify that it continues to be a suitable method for handling the WPs within the emplacement drift. Except as noted, the scope of this work does not include any new analytical investigations or any detailed studies regarding the mechanical or electrical subsystems of the gantry beyond those in Revision 00 of this analysis. This analysis has been prepared in accordance with the requirements set forth in Bottom/Side Lift Gantry Analysis (CRWMS M and O 1999b). This analysis supports the MGR design that will be presented as part of the Site Recommendation.

Bair, P.S.

2000-04-11T23:59:59.000Z

196

Scaling studies and conceptual experiment designs for NGNP CFD assessment  

SciTech Connect

The objective of this report is to document scaling studies and conceptual designs for flow and heat transfer experiments intended to assess CFD codes and their turbulence models proposed for application to prismatic NGNP concepts. The general approach of the project is to develop new benchmark experiments for assessment in parallel with CFD and coupled CFD/systems code calculations for the same geometry. Two aspects of the complex flow in an NGNP are being addressed: (1) flow and thermal mixing in the lower plenum ("hot streaking" issue) and (2) turbulence and resulting temperature distributions in reactor cooling channels ("hot channel" issue). Current prismatic NGNP concepts are being examined to identify their proposed flow conditions and geometries over the range from normal operation to decay heat removal in a pressurized cooldown. Approximate analyses have been applied to determine key non-dimensional parameters and their magnitudes over this operating range. For normal operation, the flow in the coolant channels can be considered to be dominant turbulent forced convection with slight transverse property variation. In a pressurized cooldown (LOFA) simulation, the flow quickly becomes laminar with some possible buoyancy influences. The flow in the lower plenum can locally be considered to be a situation of multiple hot jets into a confined crossflow -- with obstructions. Flow is expected to be turbulent with momentumdominated turbulent jets entering; buoyancy influences are estimated to be negligible in normal full power operation. Experiments are needed for the combined features of the lower plenum flows. Missing from the typical jet experiments available are interactions with nearby circular posts and with vertical posts in the vicinity of vertical walls - with near stagnant surroundings at one extreme and significant crossflow at the other. Two types of heat transfer experiments are being considered. One addresses the "hot channel" problem, if necessary. The second type will treat heated jets entering a model plenum. Unheated MIR (Matched-Index-of-Refraction) experiments are first steps when the geometry is complicated. One does not want to use a computational technique which will not even handle constant properties properly. The purpose of the fluid dynamics experiments is to develop benchmark databases for the assessment of CFD solutions of the momentum equations, scalar mixing and turbulence models for typical NGNP plenum geometries in the limiting case of negligible buoyancy and constant fluid properties. As indicated by the scaling studies, in normal full power operation of a typical NGNP conceptual design, buoyancy influences should be negligible in the lower plenum. The MIR experiment will simulate flow features of the paths of jets as they mix in flowing through the array of posts in a lower plenum en route to the single exit duct. Conceptual designs for such experiments are described.

D. M. McEligot; G. E. McCreery

2004-11-01T23:59:59.000Z

197

GEOCHEMICAL TESTING AND MODEL DEVELOPMENT - RESIDUAL TANK WASTE TEST PLAN  

SciTech Connect

This Test Plan describes the testing and chemical analyses release rate studies on tank residual samples collected following the retrieval of waste from the tank. This work will provide the data required to develop a contaminant release model for the tank residuals from both sludge and salt cake single-shell tanks. The data are intended for use in the long-term performance assessment and conceptual model development.

CANTRELL KJ; CONNELLY MP

2010-03-09T23:59:59.000Z

198

ATA diagnostic beam dump conceptual design  

Science Conference Proceedings (OSTI)

A diagnostic beam dump, able to withstand 72,000 pulses (10 kA, 50 MeV/pulse) per shift was designed and analyzed. The analysis shows that the conceptual beam dump design consisting of 80 vitreous carbon plate-foam elements is able to withstand the thermal and mechanical stresses generated. X-rays produced by bremsstrahlung are absorbed by a three element copper plate-foam x-ray absorber. Cooling between bursts of electron pulses is provided by pressurized helium.

Not Available

1981-09-01T23:59:59.000Z

199

Controlled air incinerator conceptual design study  

SciTech Connect

This report presents a conceptual design study for a controlled air incinerator facility for incineration of low level combustible waste at Three Mile Island Unit 2 (TMI-2). The facility design is based on the use of a Helix Process Systems controlled air incinerator. Cost estimates and associated engineering, procurement, and construction schedules are also provided. The cost estimates and schedules are presented for two incinerator facility designs, one with provisions for waste ash solidification, the other with provisions for packaging the waste ash for transport to an undefined location.

Not Available

1982-01-01T23:59:59.000Z

200

Conceptual Design Plan SM-43 Replacement Project  

SciTech Connect

The Los Alamos National Laboratory Conceptual Design Plan for the SM-43 Replacement Project outlines plans for replacing the SM-43 Administration Building. Topics include the reasons that replacement is considered a necessity; the roles of the various project sponsors; and descriptions of the proposed site and facilities. Also covered in this proposal is preliminary information on the project schedule, cost estimates, acquisition strategy, risk assessment, NEPA strategy, safety strategy, and safeguards and security. Spreadsheets provide further detail on space requirements, project schedules, and cost estimates.

University of California, Los Alamos National Laboratory, SCC Project Office

2000-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE/WIPP-99-2286 Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan Revision 7 U.S. Department of Energy December 2013 This document supersedes DOE/WIPP-99-2286, Rev. 6. Working Copy Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan DOE/WIPP-99-2286, Rev. 7 2 TABLE OF CONTENTSCHANGE HISTORY SUMMARY .............................................. 3 ACRONYMS AND ABBREVIATIONS ............................................................................ 4 1.0 INTRODUCTION .................................................................................................. 6 2.0 NOTIFICATION OR REPORTING REQUIREMENTS AND COMMITMENTS ..... 7

202

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Effective Date: 11/05/13 WP 12-IS.01-6 Revision 10 Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls Cognizant Section: Industrial Safety/Industrial Hygiene Approved By: Tom Ferguson Working Copy Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls WP 12-IS.01-6, Rev. 10 2 TABLE OF CONTENTS CHANGE HISTORY SUMMARY ..................................................................................... 7 ACRONYMS AND ABBREVIATIONS ............................................................................. 8 1.0 INTRODUCTION 1 ............................................................................................... 10 2.0 VISITORS ........................................................................................................... 11

203

A Conceptual Framework for Progressing Towards Sustainability in the  

Open Energy Info (EERE)

A Conceptual Framework for Progressing Towards Sustainability in the A Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector Jump to: navigation, search Tool Summary LAUNCH TOOL Name: A Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector Agency/Company /Organization: Food and Agriculture Organization of the United Nations Sector: Land Focus Area: Agriculture Topics: Policies/deployment programs, Pathways analysis Resource Type: Publications Website: www.fao.org/docrep/012/al322e/al322e00.pdf A Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector Screenshot References: A Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector[1] Logo: A Conceptual Framework for Progressing Towards Sustainability in the Agriculture and Food Sector

204

Computer Support for Social Awareness in Flexible Work  

Science Conference Proceedings (OSTI)

How do we conceptualize social awareness, and what support is needed to develop and maintain social awareness in flexible work settings? The paper begins by arguing the relevance of designing for social awareness in flexible work. It points out how social ... Keywords: `new' offices, ambience, design research, flexibility, social awareness

Susanne Bødker; Ellen Christiansen

2006-02-01T23:59:59.000Z

205

Development and application of a conceptual approach for defining high-level waste  

SciTech Connect

This paper presents a conceptual approach to defining high-level radioactive waste (HLW) and a preliminary quantitative definition obtained from an example implementation of the conceptual approach. On the basis of the description of HLW in the Nuclear Waste Policy Act of 1982, we have developed a conceptual model in which HLW has two attributes: HLW is (1) highly radioactive and (2) requires permanent isolation via deep geologic disposal. This conceptual model results in a two-dimensional waste categorization system in which one axis, related to ''requires permanent isolation,'' is associated with long-term risks from waste disposal and the other axis, related to ''highly radioactive,'' is associated with short-term risks from waste management and operations; this system also leads to the specification of categories of wastes that are not HLW. Implementation of the conceptual model for defining HLW was based primarily on health and safety considerations. Wastes requiring permanent isolation via deep geologic disposal were defined by estimating the maximum concentrations of radionuclides that would be acceptable for disposal using the next-best technology, i.e., greater confinement disposal (GCD) via intermediate-depth burial or engineered surface structures. Wastes that are highly radioactive were defined by adopting heat generation rate as the appropriate measure and examining levels of decay heat that necessitate special methods to control risks from operations in a variety of nuclear fuel-cycle situations. We determined that wastes having a power density >200 W/m/sup 3/ should be considered highly radioactive. Thus, in the example implementation, the combination of maximum concentrations of long-lived radionuclides that are acceptable for GCD and a power density of 200 W/m/sup 3/ provides boundaries for defining wastes that are HLW.

Croff, A.G.; Forsberg, C.W.; Kocher, D.C.; Cohen, J.J.; Smith, C.F.; Miller, D.E.

1986-01-01T23:59:59.000Z

206

Work Address:  

NLE Websites -- All DOE Office Websites (Extended Search)

BO SAULSBURY BO SAULSBURY Work Address: Home Address: Oak Ridge National Laboratory 12952 Buckley Road National Transportation Research Center Knoxville, TN 37934 Building NTRC-2, Room 118 (865) 288-0750 Oak Ridge, TN 37831-6479 (865) 574-4694 saulsburyjw@ornl.gov Technical Specialties: Land use planning Environmental and socioeconomic impact assessment National Environmental Policy Act (NEPA) project management Vehicle fuel economy Education: 1986 B. A., History (minors in English and Business), The University of Tennessee 1989 M. S., Planning, The University of Tennessee (Thesis title: Land Use Compatibility Planning for Airfield Environs: Intergovernmental Cooperation to Protect Land Users From the Effects of Aircraft Operations)

207

Microsoft Word - Conceptual Design Report Final.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Battelle Energy Alliance Conceptual Design for a Large- Diameter Natural Gas Pipeline Inspection Platform Derek Wadsworth Matthew Anderson Douglas Few Allen Anderson James...

208

WIPP - Passive Institutional Controls (PICs) Technical and Conceptual...  

NLE Websites -- All DOE Office Websites (Extended Search)

Basis Materials Analysis - evaluation of permanent marker conceptual design elements Monument Survey - examination of regional stone and ancient petroglyphs Ancient Cementitious...

209

EVAPORATIVE COOLING - CONCEPTUAL DESIGN FOR ATLAS SCT  

E-Print Network (OSTI)

The conceptual design of an evaporative two-phase flow cooling system for the ATLAS SCT detector is described, using perfluorinated propane (C3F8) as a coolant. Comparison with perfluorinated butane (C4F10) is made, although the detailed design is presented only for C3F8. The two-phase pressure drop and heat transfer coefficient are calculated in order to determine the dimensions of the cooling pipes and module contacts for the Barrel SCT. The region in which the flow is homogeneous is determined. The cooling cycle, pipework, compressor, heat exchangers and other main elements of the system are calculated in order to be able to discuss the system control, safety and reliability. Evaporative cooling appears to be substantially better than the binary ice system from the point of view of safety, reliability, detector thickness, heat transfer coefficient, cost and simplicity.

Niinikoski, T O

1998-01-01T23:59:59.000Z

210

Conceptual design study of spheromak reactors  

SciTech Connect

Preliminary design studies are carried out for a spheromak fusion reactor. Simplified circuit theory is applied to obtain characteristic relations among various parameters of the spheromak configuration for an aspect ratio A greater than or equal to 1.6. These relations are used to calculate the parameters for the conceptual designs of three types of fusion reactor: (1) DT two-component, (2) DT ignited, and, (3) catalyzed DD ignited reactors. With a total wall loading of approx. 4 MWm/sup -2/, it is found that edge magnetic fields of only approx. 4T (DT) and approx. 9T (cat. DD) are required for ignited reactors of one-meter plasma (minor) radius with output powers in the gigawatt range. Assessment of various methods of generating reactor-grade spheromak plasmas is discussed briefly.

Katsurai, M.; Yamada, M.

1980-07-01T23:59:59.000Z

211

Conceptual design of the FRIB cryogenic system  

SciTech Connect

The Facility for Rare Isotope Beams (FRIB) is a new nuclear science facility funded by the DOE Office of Science and Michigan State University (MSU). FRIB is currently under design and will be located on the MSU campus. The centerpiece of FRIB is a heavy ion linac utilizing superconducting RF cavities and magnets which in turn requires a large cryogenic system. The cryogenic system consists of a commercially produced helium refrigeration plant and an extensive distribution system. Superconducting components will operate at both 4.5 K and 2 K. This paper describes the conceptual design of the system including the expected heat loads and operating modes. The strategy for procuring a custom turnkey helium refrigeration plant from industry, an overview of the distribution system, the interface of the cryogenic system to the conventional facilities and the project schedule are also described.

Weisend II, J G; Bull, Brad; Burns, Chris; Fila, Adam; Kelley, Patrick; Laumer, Helmut; Mann, Thomas; McCartney, Allyn; Jones, S

2012-06-01T23:59:59.000Z

212

Hot conditioning equipment conceptual design report  

SciTech Connect

This report documents the conceptual design of the Hot Conditioning System Equipment. The Hot conditioning System will consist of two separate designs: the Hot Conditioning System Equipment; and the Hot Conditioning System Annex. The Hot Conditioning System Equipment Design includes the equipment such as ovens, vacuum pumps, inert gas delivery systems, etc.necessary to condition spent nuclear fuel currently in storage in the K Basins of the Hanford Site. The Hot Conditioning System Annex consists of the facility of house the Hot Conditioning System. The Hot Conditioning System will be housed in an annex to the Canister Storage Building. The Hot Conditioning System will consist of pits in the floor which contain ovens in which the spent nuclear will be conditioned prior to interim storage.

Bradshaw, F.W., Westinghouse Hanford

1996-08-06T23:59:59.000Z

213

Conceptualizations for cleaning OTEC heat exchangers  

DOE Green Energy (OSTI)

A critical operating aspect of Ocean Thermal Energy Conversion (OTEC) plants is the maintenance of clean surfaces on the seawater-side of the heat exchangers. The objective of this program was to assess the state of the art of biofouling control techniques and to evaluate the potential of these existing methods for solving the biofouling problems in the OTEC system. The first task of the program involved an in-depth review and discussion of various fouling control methods including water treatment, surface conditioning, and cleaning techniques. The methods considered applicable to OTEC were identified. This volume summarizes the second task of the program. The compatibility of the various cleaning and fouling control techniques with the different proposed heat exchanger designs and materials are discussed. Also provided are conceptual illustrations for adapting and incorporating the methods into an OTEC power plant. These conceptual designs suggest means for overcoming some of the shortcomings of the techniques which are considered suitable, however, detailed designs of the modified systems are beyond the scope of this report. Chlorination, chemical cleaning, Amertap recirculating sponge rubber balls, and MAN flow-driven brushes are the methods considered applicable for tubular heat exchangers with seawater inside the tubes. Water jets are suggested for the open-cycle and the ''trombone'' (Applied Physics Laboratory) heat exchanger designs. Although none of the methods are immediately applicable to OTEC in their present configuration, in several cases only minor developmental efforts should produce designs which can satisfy the stringent OTEC cleanliness requirements. Further research and development appear warranted for a number of other methods which indicate promise for long-range applicability. Specific recommendations are included.

Rice, M.S.; Hagel, D.; Conn, A.F.

1978-09-01T23:59:59.000Z

214

Conceptual navigation in knowledge management environments using NavCon  

Science Conference Proceedings (OSTI)

This article presents conceptual navigation and NavCon, an architecture that implements this navigation in World Wide Web pages. NavCon architecture makes use of ontology as metadata to contextualize user search for information. Based on ontologies, ... Keywords: Conceptual navigation, Context-based navigation, Knowledge management, Ontology, Semantic Web

Jose Renato Villela Dantas; Pedro Porfirio Muniz Farias

2010-07-01T23:59:59.000Z

215

Studying team shared mental models  

Science Conference Proceedings (OSTI)

As technology is used to support team-based activities, one important factor affecting the performance of teams is the kind of mental model shared between team members. This paper describes a novel conceptual graph based methodology to study these mental ... Keywords: conceptual graphs, mental models, shared mental models, taskwork, team communication, team effectiveness, team performance, teamwork

Sandra Carpenter; Julie L. Fortune; Harry S. Delugach; Letha H. Etzkorn; Dawn R. Utley; Phillip A. Farrington; Shamsnaz Virani

2008-11-01T23:59:59.000Z

216

Conceptual Liquefied Natural Gas (LNG) terminal design for Kuwait  

E-Print Network (OSTI)

This research study investigated a new conceptual design for a modular structural configuration incorporating storage for Liquefied Natural Gas (LNG) within the base of the platform structure. The structure, referred to as a modified gravity base concrete structure (MGBCS), was envisioned specifically to be constructed at a suitable site off the coast of Kuwait. Coastal offshore bathometric information, environmental data and existing data on onshore facilities were examined in the site selection portion of the study. A finite element model of the MGBCS was developed using an industry standard finite element code that allows preliminary sizes of structural models to meet appropriate design codes. A variety of parametric and design load scenarios were investigated. This research tackles some preliminary issues that are adequate for an initial evaluation of the proposed design concept. The proposed design concept needs a lot more scrutiny in order to be sufficiently developed as a concept where it can be confirmed as a truly viable concept and investment. It was confirmed that quartering sea conditions, waves approaching at a 45 degree angle, are the most critical scenarios for the terminal based on maximum values and ranges of shears and moments. In addition, there are several interesting issues in this concept that should be further looked at for this design to be further developed. The limitations of our study must be mitigated in future designs if the proposed design concept is to be carried to the implementation stage.

Aljeeran, Fares

2005-05-01T23:59:59.000Z

217

Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study  

SciTech Connect

This report evaluates the conceptual plans for a one-tonne (S4) cryostat cooling design. This document is based upon previous design work and experimental results used to evaluate the current MAJORANA DEMONSTRATOR (MJD) thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosyphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats for the S4 experiment. In this document a cryostat with up to 19 strings of Germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of both systems’ cryostats is very similar. The materials used in the fabrication of both ultra-low background experiments will be underground electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to ensure constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

Reid, Douglas J.; Orrell, John L.; Fast, James E.; Aguayo Navarrete, Estanislao

2011-02-17T23:59:59.000Z

218

Spoke cavity power coupler conceptual design work for the HEL-JTO beam exp.  

SciTech Connect

The objective of this report was to create a low-cost, modest-power RF coupler for a SRF spoke cavity beam test of electrons test to be done at LANL. Developing the design for this magnetically-coupled SRF spoke cavity testing coupler was basically straightforward since the cavity coupling port needed to be one of the 1.22-inch ID ports, and the power level was limited by the available RF to less than 400 W TW power. In addition, the coupler would be immersed in bath cryostat filled with liquid helium, and ultimately used in a pulsed mode to accelerate beam, thereby significantly relaxing the thermal loads on the coupler. Combining the above considerations with the level of resources available for this task, emphasis was placed on rapidly developing a robust, reliable design that would use commercially-available components as available to save design, engineering, and fabrication costs. Analysis was also kept to a minimum. As such, the design incorporates the following features: (1) Use of a commercially-available Type-N ceramic feedthrough. For the power and frequency range of the test, with the feedthrough immersed in LHe, it was felt the Type-N feedthrough would provide a robust, low-cost vacuum window solution. (2) The coupler outer conductors would be solid OFE copper that is brazed into two 2.75-inch CFF, with the cavity-sde flange being rotatable to allow minor Qx adjustments by rotating the coupler. The braze joint shown has the copper brazed into a groove in the SST to ensure maximum strength for successive thermal cyclings. The outer wall of the copper between the two flanges serves as the heat sink for depositing coupler heat to the liquid helium. (3) The inner conductor would be solid OFE copper brazed to the outer conductor at the top to ensure maximum thermal conductivity from the outer thermal sink area to the base of the feedthrough. A mass-reducing hole is placed down the center of the inner conductor to decrease thermal mass and weight. (4) This assembly would be mated to the Type-N feedthrough by pushing the pin from the feedthrough into a spring-loaded connector on the base of the inner conductor, then bolting the flanges together. (5) If the coupling needs to be greatly reduced, an additional 1/2-inch CFF can be inserted between the coupler and cavity flanges. Increasing the coupling can be done with a 3 stub tuner.

Rusnak, B

2007-10-09T23:59:59.000Z

219

ITER TCWS Conceptual Design Chit Resolution Report  

SciTech Connect

Design Chits resulted from the External Conceptual Design Review (CDR) held at Cadarache on July 21-23, 2009 (Reference [5.1.3]). Those Chits were categorized into 3 categories in accordance with the following rules: Category 1 - Chits to be resolved before proceeding with preliminary design; Category 2 - Chits to be resolved during preliminary design; and Category 3 - Chits already resolved or covered by higher category Chits such that no further action is required. Prior to the preliminary design, all the category 1 chits were resolved and the category chit 1 resolution report was approved (Reference [5.1.4]). However, as the design has been evolving, one of the category 1 chits needs to be re-addressed. The purpose of this report is to present the resolutions to one CDR Category 1 Chit (Cat 1 Chit No.5) and twenty-three CDR Category 2 Chits. The Category 2 Chit resolutions presented are listed in order from item number one to item number twenty-three.

Berry, Jan [ORNL

2012-02-01T23:59:59.000Z

220

Advanced turbine systems: Studies and conceptual design  

SciTech Connect

The ABB selection for the Advanced Turbine System (ATS) includes advanced developments especially in the hot gas path of the combustion turbine and new state-of-the-art units such as the steam turbine and the HRSG. The increase in efficiency by more than 10% multiplicative compared to current designs will be based on: (1) Turbine Inlet Temperature Increase; (2) New Cooling Techniques for Stationary and Rotating Parts; and New Materials. Present, projected component improvements that will be introduced with the above mentioned issues will yield improved CCSC turbine performance, which will drive the ATS selected gas-fired reference CC power plant to 6 % LHV or better. The decrease in emission levels requires a careful optimization of the cycle design, where cooling air consumption has to be minimized. All interfaces of the individual systems in the complete CC Plant need careful checks, especially to avoid unnecessary margins in the individual designs. This study is an important step pointing out the feasibility of the ATS program with realistic goals set by DOE, which, however, will present challenges for Phase II time schedule of 18 months. With the approach outlined in this study and close cooperation with DOE, ATS program success can be achieved to deliver low emissions and low cost of electricity by the year 2002. The ABB conceptual design and step approach will lead to early component demonstration which will help accelerate the overall program objectives.

van der Linden, S.; Gnaedig, G.; Kreitmeier, F.

1993-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Conceptual design of a heat pipe radiator  

SciTech Connect

A conceptual design of a waste heat radiator has been developed for a thermoelectric space nuclear power system. The basic shape of the heat pipe radiator was a frustum of a right circular cone. The design included stringer heat pipes to carry reject heat from the thermoelectric modules to the radiator skin that was composed of small-diameter, thin-walled cross heat pipes. The stringer heat pipes were armored to resist puncture by a meteoroid. The cross heat pipes were designed to provide the necessary unpunctured radiating area at the mission end with a minimum initial system mass. Several design cases were developed in which the individual stringer survival probabilities were varied and the radiator system mass was calculated. Results are presented for system mass as a function of individual stringer survival probability for six candidate container materials, three candidate heat pipe fluids, two radiator operating temperatures, two meteoroid shield types, and two radiating surface cases. Results are also presented for radiator reject heat as a function of system mass, area, and length for three system sizes.

Bennett, G.A.

1977-09-01T23:59:59.000Z

222

BIOMASS REBURNING - MODELING/ENGINEERING STUDIES  

DOE Green Energy (OSTI)

This project is designed to develop engineering and modeling tools for a family of NO{sub x} control technologies utilizing biomass as a reburning fuel. During the tenth reporting period (January 1-March 31, 2000), EER and NETL R and D group continued to work on Tasks 2, 3, 4, and 5. Information regarding these tasks will be included in the next Quarterly Report. This report includes (Appendix 1) a conceptual design study for the introduction of biomass reburning in a working coal-fired utility boiler. This study was conducted under the coordinated SBIR program funded by the U. S. Department of Agriculture.

Vladimir Zamansky; David Moyeda; Mark Sheldon

2000-04-28T23:59:59.000Z

223

Microsoft Word - Conceptual Design Report Final.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Battelle Energy Alliance Battelle Energy Alliance Conceptual Design for a Large- Diameter Natural Gas Pipeline Inspection Platform Derek Wadsworth Matthew Anderson Douglas Few Allen Anderson James Hanneman June 2005 Conceptual Design for a Large-Diameter Natural Gas Pipeline Inspection Platform Derek Wadsworth Matthew Anderson Douglas Few Allen Anderson James Hanneman June 2005 Idaho National Engineering and Environmental Laboratory Robotics and Human Systems Idaho Falls, Idaho 83415 Prepared for the U.S. Department of Energy National Energy Technology Laboratory Under DOE Idaho Operations Office Contract DE-AC07-99ID13727 INTELLIGENT PLATFORM FOR INTERNAL PIPELINE EXAMINATION - CONCEPTUAL DESIGN i LIST OF TABLES ........................................................................................................................

224

Advanced computational reasoning based on the NKRL conceptual model  

Science Conference Proceedings (OSTI)

After having recalled some well-known shortcomings linked with the Semantic Web approach to the creation of (application oriented) systems of ''rules'' - e.g., limited expressiveness, adoption of an Open World Assumption (OWA) paradigm, absence of variables ... Keywords: "Binary" vs. "n-ary" approaches, "Rules" in a SW context, Functional roles, Inference techniques, Ontologies

Gian Piero Zarri

2013-06-01T23:59:59.000Z

225

A conceptual model of estuarine freshwater inflow management  

Science Conference Proceedings (OSTI)

flow regimes for sustainable river management and the analysis of the environmental effects of hydro- logic alteration are both areas of active investiga- tion (e.g. ...

226

An Updated Conceptual Model Of The Los Humeros Geothermal Reservoir...  

Open Energy Info (EERE)

sea level (a.s.l.) the pressure profile of which corresponds to a 300-330C boiling water column and a deeper low-liquid-saturation reservoir located between 850 and 100 m...

227

A Conceptual Model for Web-Based Heterogeneous GIS  

E-Print Network (OSTI)

reference systems they reside have been provided by the OpenGIS Consortium (OGC 1996a, 1996b). The design of our Internet-based archive will meet interoperability and standardization requirements. The capability of accessing and delivering data efficiently can be achieved by enabling the system to transmit data progressively. Progressive transmission of raster images over the World Wide Web has been successfully applied to provide the user with coarser versions of data before downloading a complete image. This process is particularly useful when trying to access large amounts of data remotely through a slow communication link (e.g., a modem). Although communication lines (e.g., fiber optic cable) are getting faster, the current technology still does not adequately support wireless communication. Transmission of large amounts of data across mobile devices will continue to be an impediment for the foreseeable future; therefore, geographers and surveyors who want to access map d

Michela Bertolotto

2000-01-01T23:59:59.000Z

228

Conceptual Models and Approaches to Understanding Long Term ...  

Expansive precipitate – internal stress (cracking) ... Rebar corrosion Microcracks • Increase porosity • Increase interaction pore water/surface ...

229

Surficial Extent And Conceptual Model Of Hydrothermal System...  

Open Energy Info (EERE)

and extensive travertine deposits have developed in these more distant localities. The heat flow, distribution of thermal activity, and nature of alteration minerals and fluids...

230

Conceptual scheduling model and optimized release scheduling for agile environments  

Science Conference Proceedings (OSTI)

Context: Release scheduling deals with the selection and assignment of deliverable features to a sequence of consecutive product deliveries while several constraints are fulfilled. Although agile software development represents a major approach to software ... Keywords: Agile software development, Planning metamodel, Release planning

Ákos Szke

2011-06-01T23:59:59.000Z

231

Comparison of a NuScale SMR conceptual core design using CASMO5/simulate5 and MCNP5  

Science Conference Proceedings (OSTI)

A key issue during the initial start-ups of new Small Modular Reactors (SMRs) is the lack of operational data for reactor model validation. To help better understand the accuracy of the reactor analysis codes CASMO5 and SIMULATE5, higher order comparisons to MCNP5 have been performed. These comparisons are for an initial core conceptual design of the NuScale reactor. The data have been evaluated at Hot Zero Power (HZP) conditions. Comparisons of core reactivity, fuel temperature coefficient (FTC), and moderator temperature coefficients (MTC) have been performed. Comparison results show good agreement between CASMO5/SIMULATE5 and MCNP5 for the conceptual initial core design. (authors)

Haugh, B. [Studsvik Scandpower Inc., 1015 Ashes Drive, Wilmington, NC 28405 (United States); Mohamed, A. [NuScale Power Inc., 1100 NE Circle Blvd, Corvallis, OR 97330 (United States)

2012-07-01T23:59:59.000Z

232

Advanced Turbine Systems Program conceptual design and product development. Quarterly report, November 1993--January 1994  

SciTech Connect

This Quarterly Technical Progress Report covers the period November 1, 1993, through January 31, 1994, for Phase 11 of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE Contract No. DE-AC421-93MC30246. The objective of this program is to provide the conceptual design and product development plan for an industrial gas turbine system to operate at a thermal efficiency of 50 percent ({open_quotes}ATS50{close_quotes}) with future improvement to 60 percent ({open_quotes}ATS60{close_quotes}). During the prior quarter Solar`s ATS Engine Design Team characterized the intercooled and recuperated (ICR) gas turbine cycle in 1-spool, 2-shaft, and 2-spool 3-shaft arrangements. Fixed and variable geometry free power turbines were compared in both arrangements and sensitivity of all combinations to component performance was determined. Full- and part-load performance were compared over a range of ambient air temperatures. During the quarter just completed, the Team defined four unique and different physical arrangements of the gas turbine components outlined above. These three arrangements were then examined in terms of their ability to support Program goals of thermal efficiency, low emissions, increased reliability, availability and maintainability (RAM), and reduced cost of electrical power production. This work, together with preliminary specification of component cooling needs, suggested that earlier studies of the pressure ratio/firing temperature/thermal efficiency relationship should be re-visited. This accomplished, the effect of total cooling air bleed requirements on thermal efficiency was determined. This will lead to the selection of hot section material capability/cooling air requirements which are able to meet Program goals. As noted in the first quarterly report, where there are apparently conflicting data, later results should take precedence due to the continuing refinement of analytical models.

Karstensen, K.W.

1994-06-01T23:59:59.000Z

233

A Semi-Passive Containment Cooling System Conceptual Design  

E-Print Network (OSTI)

The objective of this project was to investigate a passive containment cooling system (PCCS) for the double concrete containment of the Korean Next Generation Reactor (KNGR). Two conceptual PCCS designs: the thermosyphon ...

Liu, H.

234

LCLS - Conceptual Design Report for the LCLS Project  

NLE Websites -- All DOE Office Websites (Extended Search)

version of the Conceptual Design Report (CDR) for the Linac Coherent Light Source (LCLS) project of the U.S. Department of Energy (DoE). The completion date of this report is...

235

UPS-Substation (TM): Evaluation, Conceptual Design and Generic Specification  

Science Conference Proceedings (OSTI)

In general terms, the UPS-Substation(TM) is an uninterruptible power supply (UPS) at the substation level. This report summarizes determining application requirements, developing conceptual designs and cost estimates, and assessing potential market size based on application.

1999-09-21T23:59:59.000Z

236

WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the sediment transport modeling task  

SciTech Connect

This site-specific Work Plan/Health and Safety Checklist (WP/HSC) is a supplement to the general health and safety plan (HASP) for Waste Area Grouping (WAG) 2 remedial investigation and site investigation (WAG 2 RI&SI) activities [Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169)] and provides specific details and requirements for the WAG 2 RI&SI Sediment Transport Modeling Task. This WP/HSC identifies specific site operations, site hazards, and any recommendations by Oak Ridge National Laboratory (ORNL) health and safety organizations [i.e., Industrial Hygiene (IH), Health Physics (HP), and/or Industrial Safety] that would contribute to the safe completion of the WAG 2 RI&SI. Together, the general HASP for the WAG 2 RI&SI (ORNL/ER-169) and the completed site-specific WP/HSC meet the health and safety planning requirements specified by 29 CFR 1910.120 and the ORNL Hazardous Waste Operations and Emergency Response (HAZWOPER) Program Manual. In addition to the health and safety information provided in the general HASP for the WAG 2 RI&SI, details concerning the site-specific task are elaborated in this site-specific WP/HSC, and both documents, as well as all pertinent procedures referenced therein, will be reviewed by all field personnel prior to beginning operations.

Holt, V.L.; Baron, L.A.

1994-05-01T23:59:59.000Z

237

NSLS Work Planning & Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning & Controls NSLS Work Planning and Control Procedure Lead Working Guidelines Information on Working in Areas Subject to Radiation from VUV Injection Procedure for...

238

Site observational work plan for the UMTRA project site at Grand Junction, Colorado  

Science Conference Proceedings (OSTI)

This site observational work plan (SOWP) is one of the first Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project documents developed to select a compliance strategy that meets the UMTRA ground water standards for the Grand Junction site. This SOWP applies information about the Grand Junction site to the compliance strategy selection framework developed in the UMTRA Ground Water Project draft programmatic environmental impact statement. This risk-based, decision-making framework identifies the decision logic for selecting compliance strategies that could be used to meet the ground water standards. The US Department of Energy (DOE) goal is to implement a cost-effective site strategy that complies with the ground water standards and protects human health and the environment. Based on an evaluation of the site characterization and risk assessment data available for the preparation of this SOWP, DOE proposes that the most likely compliance strategy for the Grand Junction site is no remediation with the application of supplemental standards. This proposed strategy is based on a conceptual site model that indicates site-related contamination is confined to a limited-use aquifer as defined in the ground water standards. The conceptual model demonstrates that the uranium processing-related contamination at the site has affected the unconfined alluvial aquifer, but not the deeper confined aquifer.

NONE

1996-01-01T23:59:59.000Z

239

Space Nuclear Power Plant Pre-Conceptual Design Report, For Information  

Science Conference Proceedings (OSTI)

This letter transmits, for information, the Project Prometheus Space Nuclear Power Plant (SNPP) Pre-Conceptual Design Report completed by the Naval Reactors Prime Contractor Team (NRPCT). This report documents the work pertaining to the Reactor Module, which includes integration of the space nuclear reactor with the reactor radiation shield, energy conversion, and instrumentation and control segments. This document also describes integration of the Reactor Module with the Heat Rejection segment, the Power Conditioning and Distribution subsystem (which comprise the SNPP), and the remainder of the Prometheus spaceship.

B. Levine

2006-01-27T23:59:59.000Z

240

Semi-automated derivation of conceptual neighborhood graphs of topological relations  

Science Conference Proceedings (OSTI)

Conceptual neighborhood graphs are similarity-based schemata of spatial/temporal relations. This paper proposes a semi-automated method for deriving a conceptual neighborhood graph of topological relations, which shows all pairs of relations between ... Keywords: 9+-intersection, conceptual neighborhood graphs, conceptual neighbors, smooth transformation, topological relations

Yohei Kurata

2009-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Next Generation CANDU: Conceptual Design for a Short Construction Schedule  

SciTech Connect

Atomic Energy of Canada Ltd. (AECL) has very successful experience in implementing new construction methods at the Qinshan (Phase III) twin unit CANDU 6 plant in China. This paper examines the construction method that must be implemented during the conceptual design phase of a project if short construction schedules are to be met. A project schedule of 48 months has been developed for the nth unit of NG (Next Generation) CANDU with a 42 month construction period from 1. Concrete to In-Service. An overall construction strategy has been developed involving paralleling project activities that are normally conducted in series. Many parts of the plant will be fabricated as modules and be installed using heavy lift cranes. The Reactor Building (RB), being on the critical path, has been the focus of considerable assessment, looking at alternative ways of applying the construction strategy to this building. A construction method has been chosen which will result in excess of 80% of internal work being completed as modules or as very streamlined traditional construction. This method is being further evaluated as the detailed layout proceeds. Other areas of the plant have been integrated into the schedule and new construction methods are being applied to these so that further modularization and even greater paralleling of activities will be achieved. It is concluded that the optimized construction method is a requirement, which must be implemented through all phases of design to make a 42 month construction schedule a reality. If the construction methods are appropriately chosen, the schedule reductions achieved will make nuclear more competitive. (authors)

Hopwood, Jerry M.; Love, Ian J.W.; Elgohary, Medhat; Fairclough, Neville [Atomic Energy of Canada Ltd., Ontario (Canada)

2002-07-01T23:59:59.000Z

242

Submitted Work & Work in Preparation - CECM  

E-Print Network (OSTI)

May 23, 2001 ... Submitted Work & Work in Preparation. I. G. Lisle and G. J. Reid, Symmetry Classification Using Invariant Moving Frames, to be submitted.

243

SLUDGE TREATMENT PROJECT KOP CONCEPTUAL DESIGN CONTROL DECISION REPORT  

SciTech Connect

This control decision addresses the Knock-Out Pot (KOP) Disposition KOP Processing System (KPS) conceptual design. The KPS functions to (1) retrieve KOP material from canisters, (2) remove particles less than 600 {micro}m in size and low density materials from the KOP material, (3) load the KOP material into Multi-Canister Overpack (MCO) baskets, and (4) stage the MCO baskets for subsequent loading into MCOs. Hazard and accident analyses of the KPS conceptual design have been performed to incorporate safety into the design process. The hazard analysis is documented in PRC-STP-00098, Knock-Out Pot Disposition Project Conceptual Design Hazard Analysis. The accident analysis is documented in PRC-STP-CN-N-00167, Knock-Out Pot Disposition Sub-Project Canister Over Lift Accident Analysis. Based on the results of these analyses, and analyses performed in support of MCO transportation and MCO processing and storage activities at the Cold Vacuum Drying Facility (CVDF) and Canister Storage Building (CSB), control decision meetings were held to determine the controls required to protect onsite and offsite receptors and facility workers. At the conceptual design stage, these controls are primarily defined by their safety functions. Safety significant structures, systems, and components (SSCs) that could provide the identified safety functions have been selected for the conceptual design. It is anticipated that some safety SSCs identified herein will be reclassified based on hazard and accident analyses performed in support of preliminary and detailed design.

CARRO CA

2010-03-09T23:59:59.000Z

244

Development based climate change adaptation and mitigation-conceptual  

Open Energy Info (EERE)

Development based climate change adaptation and mitigation-conceptual Development based climate change adaptation and mitigation-conceptual issues and lessons learned in studies in developing countries Jump to: navigation, search Tool Summary Name: Development based climate change adaptation and mitigation-conceptual issues and lessons learned in studies in developing countries Agency/Company /Organization: Lawrence Berkeley National Laboratory (LBNL) Sector: Climate, Energy, Land, Water Topics: Adaptation, Co-benefits assessment, - Energy Access, - Energy Security, - Health Resource Type: Case studies/examples, Lessons learned/best practices, Publications Website: ies.lbl.gov/iespubs/2halsaes.pdf Country: India, China, South Africa, Brazil, Bangladesh, Senegal Cost: Free Southern Asia, Eastern Asia, Southern Africa, South America, Southern Asia, Western Africa

245

Conceptualization And Implementation Of A Tectonic Geomorphology Study For  

Open Energy Info (EERE)

Conceptualization And Implementation Of A Tectonic Geomorphology Study For Conceptualization And Implementation Of A Tectonic Geomorphology Study For Geothermal Exploration In The Great Basin, Usa Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Conceptualization And Implementation Of A Tectonic Geomorphology Study For Geothermal Exploration In The Great Basin, USA Details Activities (0) Areas (0) Regions (0) Abstract: Characterization of tectonic extension and extensional faulting in the Great Basin, U.S.A. has been identified as a priority for geothermal exploration. Geomorphometry can be used to characterize extension rates through the quantification of tectonically induced landforms. A number of geomorphometry-based studies, within the context of tectonic geomorphology, have shown the usefulness of this type of analysis in characterizing

246

MINIMARS conceptual design: Report I. Volume 2  

SciTech Connect

This report contains separate articles of seven aspects of the MINIMARS programs. The areas discussed are Fusion Engineering Design Center, Halo Model and Computer Code, safety design, the University of Wisconsin blankets, activation product transport in a FLiBe-VANADIUM alloy HT-9 system, a halo scraper/direct converter system, and heat transport power conversion. The individual articles are cataloged separately. (WRF)

Lee, J.D. (ed.)

1985-12-01T23:59:59.000Z

247

WRAP 2A advanced conceptual design report comments  

SciTech Connect

This report contains the compilation of the 393 comments that were submitted during the review of the Advanced Conceptual Design Report for the Waste Receiving and Processing Facility Module 2A. The report was prepared by Raytheon Engineers and Constructors, Inc. of Englewood, Colorado for the United States Department of Energy. The review was performed by a variety of organizations identified in the report. The comments were addressed first by the Westinghouse cognizant engineers and then by the Raytheon cognizant engineers, and incorporated into the final issue of the Advanced Conceptual Design Report.

Lamberd, D.L.

1994-10-04T23:59:59.000Z

248

Work Force Retention Work Group Charter  

Energy.gov (U.S. Department of Energy (DOE))

The Work force Retention Work Group is established to support the Department’s critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOE’s national security mission are reaching retirement age.

249

Live Working Resource Center  

Science Conference Proceedings (OSTI)

This report is a summary of work performed in 2008 on the EPRI Live Working Resource Center (LWRC) web site.

2008-12-16T23:59:59.000Z

250

Site observational work plan for the UMTRA Project site at Falls City, Texas  

Science Conference Proceedings (OSTI)

Produced by the US Department of Energy (DOE), this site observational work plan (SOWP) will be used to determine site-specific activities to comply with the US Environmental Protection Agency (EPA) ground water standards at this Uranium Mill Tailings Remedial Action (UMTRA) Project site. The purpose of the SOWP is to recommend a site-specific ground water compliance strategy at the Falls City UMTRA Project site. The Falls City SOWP presents a comprehensive summary of site hydrogeological data, delineates a conceptual model of the aquifer system, and discusses the origins of milling-related ground water contamination. It also defines the magnitude of ground water contamination, potential environmental and health risks associated with ground water contamination and data gaps, and targets a proposed compliance strategy.

NONE

1995-06-01T23:59:59.000Z

251

Life Cycle Management of Chemicals: Conceptual Design for Information Management  

Science Conference Proceedings (OSTI)

Tracking the acquisition, use, and disposition of chemicals allows companies to reduce costs; manage risks to health, safety, and the environment; and improve compliance and reporting efficiency. This report provides a means of identifying and evaluating chemical life cycle information management needs. The conceptual design presented here will guide utilities through development of a custom system for managing chemical life cycle data.

1999-08-10T23:59:59.000Z

252

Multifaceted conceptual image indexing on the world wide web  

Science Conference Proceedings (OSTI)

In this paper, we describe a user-centered design of an automated multifaceted concept-based indexing framework which analyzes the semantics of the Web image contextual information and classifies it into five broad semantic concept facets: signal, object, ... Keywords: Conceptual image indexing, Content analysis, Semantic facets, User-centered design, WWW contextual information

Fariza Fauzi; Mohammed Belkhatir

2013-03-01T23:59:59.000Z

253

Function-based failure propagation for conceptual design  

Science Conference Proceedings (OSTI)

When designing a product, the earlier the potential risks can be identified, the more costs can be saved, as it is easier to modify a design in its early stages. Several methods exist to analyze the risk in a system, but all require a mature design. ... Keywords: Conceptual Design, Function-Based Design, Probabilistic Risk Analysis

Daniel Krus; Katie Grantham lough

2009-11-01T23:59:59.000Z

254

EER-CONCEPTOOL: Conceptual Analysis of EER Schemas and Ontologies  

E-Print Network (OSTI)

EER-CONCEPTOOL: Conceptual Analysis of EER Schemas and Ontologies Ernesto Compatangelo Department We have developed an intelligent knowledge management environment called EER-ConcepTool, which and heuristic reasoning services. We highlight how EER-ConcepTool overcomes some typical drawbacks of current

Compatangelo, Ernesto

255

Will Nano-Butlers Work for Micro-Payments? Innovation in Business Services Model may Reduce Cost of Delivering Global Healthcare Services  

E-Print Network (OSTI)

This paper represents an emerging view of personalized care and patient-centric systems approach. It integrates biomedical informatics and business services. A potentially innovative model may evolve from this convergence ...

Datta, Shoumen

2008-07-31T23:59:59.000Z

256

Applying and extending a semantic foundation for role-related concepts in enterprise modelling  

Science Conference Proceedings (OSTI)

In this paper, we provide a semantic foundation for role-related concepts in enterprise modelling. We use a conceptual modelling framework to provide a well-founded underpinning for these concepts. We review a number of enterprise modelling approaches ... Keywords: actors, conceptual modelling, enterprise modelling, object modelling, roles

Joao Paulo A. Almeida; Giancarlo Guizzardi; Paulo Sergio Santos, Jr

2009-08-01T23:59:59.000Z

257

DOE Makes Available $8 Million for Pre-Conceptual Design of Next...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Makes Available 8 Million for Pre-Conceptual Design of Next Generation Nuclear Plants DOE Makes Available 8 Million for Pre-Conceptual Design of Next Generation Nuclear Plants...

258

Kilowatt isotope power system phase II plan. Volume II: flight System Conceptual Design (FSCD)  

SciTech Connect

The Kilowatt Isotope Power System (KIPS) Flight System Conceptual Design (FSCD) is described. Included are a background, a description of the flight system conceptual design, configuration of components, flight system performance, Ground Demonstration System test results, and advanced development tests.

1978-03-01T23:59:59.000Z

259

CLIC CDR - physics and detectors: CLIC conceptual design report.  

SciTech Connect

This report forms part of the Conceptual Design Report (CDR) of the Compact LInear Collider (CLIC). The CLIC accelerator complex is described in a separate CDR volume. A third document, to appear later, will assess strategic scenarios for building and operating CLIC in successive center-of-mass energy stages. It is anticipated that CLIC will commence with operation at a few hundred GeV, giving access to precision standard-model physics like Higgs and top-quark physics. Then, depending on the physics landscape, CLIC operation would be staged in a few steps ultimately reaching the maximum 3 TeV center-of-mass energy. Such a scenario would maximize the physics potential of CLIC providing new physics discovery potential over a wide range of energies and the ability to make precision measurements of possible new states previously discovered at the Large Hadron Collider (LHC). The main purpose of this document is to address the physics potential of a future multi-TeV e{sup +}e{sup -} collider based on CLIC technology and to describe the essential features of a detector that are required to deliver the full physics potential of this machine. The experimental conditions at CLIC are significantly more challenging than those at previous electron-positron colliders due to the much higher levels of beam-induced backgrounds and the 0.5 ns bunch-spacing. Consequently, a large part of this report is devoted to understanding the impact of the machine environment on the detector with the aim of demonstrating, with the example of realistic detector concepts, that high precision physics measurements can be made at CLIC. Since the impact of background increases with energy, this document concentrates on the detector requirements and physics measurements at the highest CLIC center-of-mass energy of 3 TeV. One essential output of this report is the clear demonstration that a wide range of high precision physics measurements can be made at CLIC with detectors which are challenging, but considered feasible following a realistic future R&D program.

Berger, E.; Demarteau, M.; Repond, J.; Xia, L.; Weerts, H. (High Energy Physics); (Many)

2012-02-10T23:59:59.000Z

260

Conceptual design of a 5x CPC for solar total energy systems  

DOE Green Energy (OSTI)

The results of a conceptual design of a nontracking collector for a solar total energy system are described. Sandia Laboratories has responsibility for the evaluation of concentrating collectors in a total energy test bed. A Rankine cycle turbine, generator, controls, thermal storage, and air conditioning equipment have been installed and checked out. The thermal energy for the facility is to be provided by a large (approximately 800 m/sup 2/) concentrating collector field. At present a portion of the area is installed as E-W oriented linear parabolic troughs. Three additional concepts for the remaining area have been selected--a fixed mirror-moving receiver system, fixed receiver-moving reflector slats, and a two-axis tracking parabolic dish. All four systems use diurnal tracking and have the reflecting surfaces exposed to the elements. Argonne National Laboratory has been working on the development of non-tracking concentrators for high temperature operation. The recent experimental results indicate that a 5x CPC collector with only 12 adjustments per year could effectively compete with the systems presently being considered. These collectors would be enclosed under a protective cover glass, eliminating many of the problems with dirt, etc. A conceptual design of a CPC collector system is presented.

Cole, R; Schertz, W W; Teagan, W P

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Facility for Advanced Accelerator Experimental Tests at SLAC (FACET) Conceptual Design Report  

Science Conference Proceedings (OSTI)

This Conceptual Design Report (CDR) describes the design of FACET. It will be updated to stay current with the developing design of the facility. This CDR begins as the baseline conceptual design and will evolve into an 'as-built' manual for the completed facility. The Executive Summary, Chapter 1, gives an introduction to the FACET project and describes the salient features of its design. Chapter 2 gives an overview of FACET. It describes the general parameters of the machine and the basic approaches to implementation. The FACET project does not include the implementation of specific scientific experiments either for plasma wake-field acceleration for other applications. Nonetheless, enough work has been done to define potential experiments to assure that the facility can meet the requirements of the experimental community. Chapter 3, Scientific Case, describes the planned plasma wakefield and other experiments. Chapter 4, Technical Description of FACET, describes the parameters and design of all technical systems of FACET. FACET uses the first two thirds of the existing SLAC linac to accelerate the beam to about 20GeV, and compress it with the aid of two chicanes, located in Sector 10 and Sector 20. The Sector 20 area will include a focusing system, the generic experimental area and the beam dump. Chapter 5, Management of Scientific Program, describes the management of the scientific program at FACET. Chapter 6, Environment, Safety and Health and Quality Assurance, describes the existing programs at SLAC and their application to the FACET project. It includes a preliminary analysis of safety hazards and the planned mitigation. Chapter 7, Work Breakdown Structure, describes the structure used for developing the cost estimates, which will also be used to manage the project. The chapter defines the scope of work of each element down to level 3.

Amann, J.; Bane, K.; /SLAC

2009-10-30T23:59:59.000Z

262

Teaching for Conceptual Change in Security Awareness: A Case Study in Higher Education  

Science Conference Proceedings (OSTI)

The authors present a case study in which conceptual change pedagogy was implemented in information security education. The results suggest conceptual change fostered by anomalous data is effective in the teaching and learning of information security. Keywords: Security and privacy, education, conceptual change

Yuen-Yan Chan; Victor K. Wei

2009-01-01T23:59:59.000Z

263

Towards Unrestricted, Large-Scale Acquisition of Feature-Based Conceptual Representations from Corpus Data  

Science Conference Proceedings (OSTI)

In recent years a number of methods have been proposed for the automatic acquisition of feature-based conceptual representations from text corpora. Such methods could offer valuable support for theoretical research on conceptual representation. However, ... Keywords: Conceptual representations, Corpus-based acquisition, Property norms, Semantic features

Barry Devereux; Nicholas Pilkington; Thierry Poibeau; Anna Korhonen

2009-12-01T23:59:59.000Z

264

ORISE: Work for Others  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Science Education Work for Others The U.S. Department of Energy's (DOE) Work for Others (WFO) program allows the performance of work for non-DOE entities when the...

265

OTEC riser cable system, Phase II: conceptual design  

SciTech Connect

Studies are summarized of conceptual designs of riser cable systems for OTEC pilot plants of both the spar and plantship configurations located at sites off the southeast coast of Puerto Rico. The studies utilize a baseline pilot plant riser cable, the design of which has been developed and reported on in other reports. Baseline riser cable systems for OTEC pilot plants are identified, system hardware consistent with these designs are conceptualized, and comparisons of the various system concepts are provided. It is concluded that there are three riser cable systems feasible for a spar pilot plant platform at the Punta Yeguas site, and two riser cable systems feasible at the plantship pilot plant at the Punta Tuna site. Recommendations for further investigations in the areas of materials, hardware design and pre-installation site surveys are also addressed.

Not Available

1980-10-01T23:59:59.000Z

266

The Spallation Neutron Source (SNS) conceptual design shielding analysis  

SciTech Connect

The shielding design is important for the construction of an intense high-energy accelerator facility like the proposed Spallation Neutron Source (SNS) due to its impact on conventional facility design, maintenance operations, and since the cost for the radiation shielding shares a considerable part of the total facility costs. A calculational strategy utilizing coupled high energy Monte Carlo calculations and multi-dimensional discrete ordinates calculations, along with semi-empirical calculations, was implemented to perform the conceptual design shielding assessment of the proposed SNS. Biological shields have been designed and assessed for the proton beam transport system and associated beam dumps, the target station, and the target service cell and general remote maintenance cell. Shielding requirements have been assessed with respect to weight, space, and dose-rate constraints for operating, shutdown, and accident conditions. A discussion of the proposed facility design, conceptual design shielding requirements calculational strategy, source terms, preliminary results and conclusions, and recommendations for additional analyses are presented.

Johnson, J.O.; Odano, N.; Lillie, R.A.

1998-03-01T23:59:59.000Z

267

Greene County 100 MW Biomass Conceptual Engineering Study  

Science Conference Proceedings (OSTI)

Southern Company Services, Incorporated, (SCS) is interested in constructing a 100-megawatt (MW) (net) biomass-fueled facility at an existing facility to increase its share of renewable energy generation and to support future load growth. The site of interest is the Greene County Electric Generating Plant in Demopolis, Alabama. This report represents the formal compilation of key engineering deliverables that collectively provide a better understanding of the conceptual-level parameters associated with t...

2010-12-10T23:59:59.000Z

268

Advanced Turbine Systems Program: Conceptual design and product development  

SciTech Connect

Objective is to provide the conceptual design and product development plant for an ultra high efficiency, environmentally superior, and cost competitive industrial gas turbine system to be commercialized by the year 2000 (secondary objective is to begin early development of technologies critical to the success of ATS). This report addresses the remaining 7 of the 9 subtasks in Task 8, Design and Test of Critical Components: catalytic combustion, recuperator, high- temperature turbine disc, advanced control system, and ceramic materials.

1996-12-31T23:59:59.000Z

269

Conceptual design of a theta-pinch power plant  

DOE Green Energy (OSTI)

From 5th symposium on engineering problems of fusion research; Princeton, New Jersey, USA (6 Nov 1973). An engineering design of a conceptual CTR power plant is presented. The fusion reaction is produced in a plasma in a toroidal chamber having major and minor radii of 55 and 0.5 meters, respectively. Major systems discussed include: implosion heating compression/confinement, energy storage, first wall, blanket, fuel ash supply and removal, power conversion, and others, with emphasis on the engineering systems. (auth)

Coultas, T.A.; Dauzvardis, P.V.; Krakowski, R.A.

1973-01-01T23:59:59.000Z

270

WORKING DRAFT WORKING DRAFT A SURVEY OF ...  

Science Conference Proceedings (OSTI)

... at the New York headquarters might make sense ... a database and directory services infrastructure ... access control model throughout the organization. ...

2009-08-31T23:59:59.000Z

271

Live Working Resource Center  

Science Conference Proceedings (OSTI)

EPRI created the Live Working Resource Center web site to provide utilities the critical information they need to conduct live work safely and efficiently. This report is a summary of work performed in 2007 on the web site. See EPRI's Live Working Resource Center.

2007-11-30T23:59:59.000Z

272

Scientific Working Groups  

Science Conference Proceedings (OSTI)

... TWGDAM 1988). SWGDOG, Scientific Working Group on Dogs and Orthogonal Detection Guidelines, 2004. SWGTOX, Scientific ...

2013-07-10T23:59:59.000Z

273

Waste Receiving and Processing Facility Module 2A: Advanced Conceptual Design Report. Volume 1  

Science Conference Proceedings (OSTI)

This ACDR was performed following completed of the Conceptual Design Report in July 1992; the work encompassed August 1992 to January 1994. Mission of the WRAP Module 2A facility is to receive, process, package, certify, and ship for permanent burial at the Hanford site disposal facilities the Category 1 and 3 contact handled low-level radioactive mixed wastes that are currently in retrievable storage at Hanford and are forecast to be generated over the next 30 years by Hanford, and waste to be shipped to Hanford from about DOE sites. This volume provides an introduction to the ACDR process and the scope of the task along with a project summary of the facility, treatment technologies, cost, and schedule. Major areas of departure from the CDR are highlighted. Descriptions of the facility layout and operations are included.

Not Available

1994-03-01T23:59:59.000Z

274

Aspecto-Temporal Data and Lexical Representations in French within Simple Conceptual Graphs on the Basis of Semantico-Cognitive Schemes  

Science Conference Proceedings (OSTI)

This paper deals with the modeling of time, aspect and verbal meanings in natural language processing within Simple Conceptual Graphs (SCG) by way of Semantico-Cognitive Schemes (SCS) and the aspecto-temporal theory. The expression of a semantico-cognitive ...

Tassadit Amghar; Thierry Charnois; Delphine Battistelli

2001-07-01T23:59:59.000Z

275

Conceptualizing learning for sustainability through environmental assessment: critical reflections on 15 years of research  

SciTech Connect

Numerous scholars are now directing their attention to the education and learning implications of participatory resource and environmental governance because of the potential implications of these for generating the social mobilization necessary to achieve sustainability trajectories. Our work, and that of other researchers, establishes that public participation in environmental assessment (EA) provides fertile ground for considering the intricacies of governance as they relate to participation, and for examining the education and learning implications of participation. Since EA law requires in many cases that public voices be part of the decision process, it has resulted in the creation of fascinating, state-sanctioned, deliberative spaces for civic interactions. Our purpose here is to share, and build upon, a framework that conceptualizes the relationships among participation, education, learning and sustainability in an EA context. We do so by considering findings from studies we have undertaken on participation in EA in Canada since the early 90's. Our approach was interactive and collaborative. We each considered in detail the key results of our earlier work as they relate to education, learning and EA process design. The findings illuminate aspects of the conceptual framework for which there is considerable empirical evidence, such as the link between meaningful participation and critical education and the diversity of individual learning outcomes associated with public participation in EA. The findings also highlight those parts of the framework for which the empirical evidence is relatively sparse, such as the range of possible social learning outcomes, their congruence with sustainability criteria, and the roles of monitoring and cumulative and strategic assessments in shaping EA into an adaptive, learning system.

Sinclair, A. John [Natural Resources Institute, University of Manitoba, Sinnott Building, 70 Dysart Road, Winnipeg, Manitoba, R3T 2N2 (Canada)], E-mail: jsincla@ms.umanitoba.ca; Diduck, Alan [Environmental Studies Program, University of Winnipeg, 515 Portage Avenue, Winnipeg, Manitoba, R3B 2E9 (Canada)], E-mail: a.diduck@uwinnipeg.ca; Fitzpatrick, Patricia [Department of Geography, University of Winnipeg, 515 Portage Avenue, Winnipeg, Manitoba, R3B 2E9 (Canada)], E-mail: p.fitzpatrick@uwinnipeg.ca

2008-10-15T23:59:59.000Z

276

Electrical Safe Work Practices  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Safe Work Practices Electrical Safe Work Practices July 15, 2005 NOTE: Working hot is a last alternative All activities on or near electrically energized systems having live parts shall be conducted in accordance with the limitations and procedures specified in the latest version of NFPA 70E and with the safe work practices and conditions that follow. Only qualified personnel {as defined in NFPA 70E Article 110.6(D)} as authorized by supervisor can perform such work. Safe Work Practices: Know the equipment and potential hazards - Define the scope of work. Submit the scope of work to your supervisor for approval. Analyze the hazards use engineered methods to mitigate hazards. Establish procedures as necessary. Use barricades or other means to prevent unqualified persons crossing approach boundaries.

277

Working Group 7 Summary  

SciTech Connect

The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

Nagaitsev S.; Berg J.

2012-06-10T23:59:59.000Z

278

Live Working Resource Forum  

Science Conference Proceedings (OSTI)

This project involves development of a Live Working Resource Forum for documenting common and unique live work practices. It also serves as a repository of lessons learned derived from analysis of live work incidents. This Technical Update report is the design document of the Forum.

2006-12-14T23:59:59.000Z

279

PEP-II: An asymmetric B factory. Conceptual design report  

Science Conference Proceedings (OSTI)

In this report, the authors have described an updated conceptual design for the high-luminosity Asymmetric B Factory (PEP-II) to be built in the PEP tunnel culmination of more than four years of effort aimed at the design and construction of an asymmetric e{sub +}e{sub {minus}} collider capable of achieving a luminosity of L = 3 {times} 10{sup 33} cm{sup {minus}2} s{sup {minus}1}. All aspects of the conceptual design were scrutinized in March 1991 by a DOE technical review committee chaired by Dr. L. Edward Temple. The design was deemed feasible and capable of achieving its physics goals. Furthermore, the cost estimate, schedule, and management plan for the project were fully endorsed by the committee. This updated conceptual design report captures the technical progress since the March 1991 review and reflects the lower cost estimate corresponding to the improved design. Although the PEP-II design has continued to evolve, no technical scope changes have been made that invalidate the conclusion of the DOE review. The configuration adopted utilizes two storage rings, an electron ring operating at 9 GeV and a positron ring at 3.1 GeV, each with a circumference of 2200 m. The high-energy ring is an upgrade of the PEP storage ring at SLAC; all PEP magnets and most power supplies will be reused. The upgrade consists primarily of replacing the PEP vacuum chamber and RF system with newly designed versions optimized for the high-current environment of PEP-II. The low-energy ring will be newly constructed and will be situated atop the high-energy ring in the PEP tunnel. Utilities already installed in the PEP tunnel are largely sufficient to operate the two PEP-II storage rings.

Not Available

1993-06-01T23:59:59.000Z

280

A BRIEF REVIEW OF MODELS REPRESENTING CREEP OF ALLOY 617  

SciTech Connect

Alloy 617 is being considered for the construction of components to operate in the Next Generation Nuclear Plant (NGNP). Service temperatures will range from 650 to 1000 C. To meet the needs of the conceptual designers of this plant, a materials handbook is being developed that will provide information on alloy 617, as well as other materials of interest. The database for alloy 617 to be incorporated into the handbook was produced in the 1970s and 1980s, while creep and damage models were developed from the database for use in the design of high-temperature gas-cooled reactors. In the work reported here, the US database and creep models are briefly reviewed. The work reported represents progress toward a useful model of the behavior of this material in the temperature range of 650 to 1000 C.

Swindeman, Robert W [ORNL; Swindeman, Michael [University of Dayton Research Institute; Ren, Weiju [ORNL

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Stochastic Parameterization Schemes for Use in Realistic Climate Models  

Science Conference Proceedings (OSTI)

Stochastic parameterizations of fast-evolving, subgrid-scale processes are increasingly being used in a range of models from conceptual models to general circulation models. However, stochastic terms are generally included in an ad hoc fashion. ...

Joel Culina; Sergey Kravtsov; Adam H. Monahan

2011-02-01T23:59:59.000Z

282

Cloud-Resolving Model Simulations and a Simple Model of an Idealized Walker Cell  

Science Conference Proceedings (OSTI)

An idealized Walker cell with prescribed sea surface temperature (SST) and prescribed radiative cooling is studied using both a two-dimensional cloud-resolving model (CRM) and a simple conceptual model. In the CRM, for the same SST distribution, ...

Jonathan Wofsy; Zhiming Kuang

2012-12-01T23:59:59.000Z

283

Model correspondence as a basis for schema domination  

Science Conference Proceedings (OSTI)

Conceptual schemata each representing some component of a system in the making, can be integrated in a variety of ways. Herein, we explore some fundamental notions of this. In particular, we examine some ways in which integration using correspondence ... Keywords: Conceptual modelling, Domination, ER-modelling, Schema integration

Guy Davies; Love Ekenberg

2010-10-01T23:59:59.000Z

284

NETL: News Release - DOE Releases Feasibility Study for Conceptual  

NLE Websites -- All DOE Office Websites (Extended Search)

21 , 2007 21 , 2007 DOE Releases Feasibility Study for Conceptual Coal-to-Liquids Facility in Midwest Report Outlines the Path Toward Future Domestic Energy Facilities WASHINGTON, DC - The Office of Fossil Energy's National Energy Technology Laboratory has issued a report that examines the feasibility of a commercial 50,000 barrel per day coal-to-liquids (CTL) facility in the Illinois coal basin. The conceptual design study provides a performance baseline that can be used to show how CTL could capitalize on domestic energy resources while providing a much-needed bulwark against rising petroleum and natural gas prices. The price of coal-derived liquid fuels has traditionally been unable to compete with the price of fuels derived from crude oil. As oil prices continue to rise, however, domestic sources of transportation fuels are becoming more affordable. The economic and national security concerns related to non-domestic liquid fuels have more eyes turning to alternative sources of liquid fuels, and, with coal being America's most abundant energy resource, CTL facilities may provide a winning option.

285

Northeast Oregon Hatchery Project, Conceptual Design Report, Final Report.  

DOE Green Energy (OSTI)

This report presents the results of site analysis for the Bonneville Power Administration Northeast Oregon Hatchery Project. The purpose of this project is to provide engineering services for the siting and conceptual design of hatchery facilities for the Bonneville Power Administration. The hatchery project consists of artificial production facilities for salmon and steelhead to enhance production in three adjacent tributaries to the Columbia River in northeast Oregon: the Grande Ronde, Walla Walla, and Imnaha River drainage basins. Facilities identified in the master plan include adult capture and holding facilities; spawning incubation, and early rearing facilities; full-term rearing facilities; and direct release or acclimation facilities. The evaluation includes consideration of a main production facility for one or more of the basins or several smaller satellite production facilities to be located within major subbasins. The historic and current distribution of spring and fall chinook salmon and steelhead was summarized for the Columbia River tributaries. Current and future production and release objectives were reviewed. Among the three tributaries, forty seven sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

Watson, Montgomery (Montgomery Watson, Bellevue, WA)

1995-03-01T23:59:59.000Z

286

Umatilla Satellite and Release Sites Project : Final Conceptual Design Report.  

DOE Green Energy (OSTI)

This report presents the results of site analysis for the Umatilla Satellite and Release Sites Project. The purpose of this project is to provide engineering services for the siting and conceptual design of satellite and release facilities for the Umatilla Basin hatchery program. The Umatilla Basin hatchery program consists of artificial production facilities for salmon and steelhead to enhance production in the Umatilla River as defined in the Umatilla master plan approved in 1989 by the Northwest Power Planning Council. Facilities identified in the master plan include adult salmon broodstock holding and spawning facilities, facilities for recovery, acclimation, and/or extended rearing of salmon juveniles, and development of river sites for release of hatchery salmon and steelhead. The historic and current distribution of fall chinook, summer chinook, and coho salmon and steelhead trout was summarized for the Umatilla River basin. Current and future production and release objectives were reviewed. Twenty seven sites were evaluated for the potential development of facilities. Engineering and environmental attributes of the sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

Montgomery, James M.

1992-03-01T23:59:59.000Z

287

Conceptual design study for a laser fusion hybrid  

SciTech Connect

Lawrence Livermore Laboratory and Bechtel Corporation have been involved in a joint effort to conceptually design a laser fusion hybrid reactor. The design which has evolved is a depleted-uranium fueled fast-fission blanket which produces fissile plutonium and electricity. A major objective of the design study was to evaluate the feasibility of producing fissile fuel with laser fusion. This feasibility evaluation was carried out by analyzing the integrated engineering performance of the complete conceptual design and by identifying the required laser/pellet performance. The performance of the laser fusion hybrid has also been compared to a typical fast breeder reactor. The results show that the laser fusion hybrid produces enough fissile material to fuel more than six light water reactors (LWR's) of equivalent thermal power while operating in a regime which requires an order of magnitude less laser and pellet performance than pure laser fusion. In comparison to a fast breeder reactor the hybrid produces 10 times more fissile fuel. An economic analysis of the design shows that the cost of electricity in a combined hybrid-LWR scenario is insensitive to the capital cost of the hybrid, increasing by only 20 to 40 percent when the capital cost of the hybrid ranges from 2 to 3 times more than an LWR.

Maniscalco, J.A.

1976-09-01T23:59:59.000Z

288

Work/Life Balance  

NLE Websites -- All DOE Office Websites (Extended Search)

Work/Life Balance Work/Life Balance /careers/_assets/images/careers-icon.jpg Work/Life Balance Explore the multiple dimensions of a career at LANL: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. What our employees say: Health & Wellness "The Lab pays 80 percent of my family's medical premiums with Blue Cross Blue Shield of New Mexico." Retirement & Savings "With the Lab matching my 401K contributions of six percent, I'm making good progress in saving for my retirement." Time Off "Like many of my colleagues here, I work nine hours on most work days so that I can take every other Friday off." Tax Savings "My flexible spending accounts allow me to set aside pre-tax dollars for

289

EPRI Live Working Project  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has been conducting research in the area of live working for several decades. This research has resulted in a large number of reports and other products. To help users locate the results of EPRI’s research in live working, an annual update is prepared containing brief descriptions of the products.BackgroundLive work—the performance of maintenance, construction, or testing on equipment and circuits that ...

2012-09-06T23:59:59.000Z

290

Hot Working I - TMS  

Science Conference Proceedings (OSTI)

The conversion of ingot structure to fine equiaxed wrought structure will be ... Special methods to breakdown the difficult-to-work titanium aluminide alloys will  ...

291

Working/Functional Fluids  

Science Conference Proceedings (OSTI)

... power cycle except that it uses an organic working fluid instead of water to allow operation at lower temperatures, including geothermal or solar ...

2012-10-05T23:59:59.000Z

292

tchr_work_template  

NLE Websites -- All DOE Office Websites (Extended Search)

are identified and prepared in advance. f. teachers receive advance communication about program logistics. 4. The Teacher's Work Experience a. relates to the scientific and...

293

Using the CIM Conceptualization in Autonomic System Management: the System Management Ontology Project  

E-Print Network (OSTI)

Using the CIM Conceptualization in Autonomic System Management: the System Management Ontology across multiple organizations. The CIM standard #12;schemas, on which system databases on CIM

Calvanese, Diego

294

Professional development handbook for conceptual understanding in secondary mathematics: 3 days of training.  

E-Print Network (OSTI)

??Teaching conceptually in mathematics, which draws on the underlying structure and logic of concepts, has shown to be successful for students’ knowledge construction. Traditional mathematics… (more)

Kizner, Susan Pamela

2010-01-01T23:59:59.000Z

295

Konceptuell design och utveckling av hybridfordon; Conceptual design and development of a hybrid vehicle.  

E-Print Network (OSTI)

?? This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the… (more)

Magnéli, Rickard; Seving, Staffan

2008-01-01T23:59:59.000Z

296

A conceptual scheme for focusing of high power microwaves in SYMPLE  

Science Conference Proceedings (OSTI)

The conceptual Scheme of Focusing the High pulsed microwave power generated by "VIRCATOR" on plasma produced in "SYMPLE", using Plasma Lens, is discussed.

Renu Bahl; K. Sathyanarayna; V. P. Anitha; Priyavandna J. Rathod; Y. C. Saxena

2011-02-01T23:59:59.000Z

297

Conceptual design letter report for project W-454, AW jumper manifold upgrade  

SciTech Connect

This Conceptual Design Letter Report provides details on the activities required to be performed for this project and also provides cost estimates and schedules for those activities.

Mattichak, R.W., Westinghouse Hanford

1996-06-12T23:59:59.000Z

298

Conceptual design of thorium-fuelled Mitrailleuse accelerator-driven subcritical reactor using D-Be neutron source  

Science Conference Proceedings (OSTI)

A distributed accelerator is a charged-particle accelerator that uses a new acceleration method based on repeated electrostatic acceleration. This method offers outstanding benefits not possible with the conventional radio-frequency acceleration method, including: (1) high acceleration efficiency, (2) large acceleration current, and (3) lower failure rate made possible by a fully solid-state acceleration field generation circuit. A 'Mitrailleuse Accelerator' is a product we have conceived to optimize this distributed accelerator technology for use with a high-strength neutron source. We have completed the conceptual design of a Mitrailleuse Accelerator and of a thorium-fuelled subcritical reactor driven by a Mitrailleuse Accelerator. This paper presents the conceptual design details and approach to implementing the subcritical reactor core. We will spend the next year or so on detailed design work, and then will start work on developing a prototype for demonstration. If there are no obstacles in setting up a development organization, we expect to finish verifying the prototype's performance by the third quarter of 2015. (authors)

Kokubo, Y. [Quan Japan Company Limited, 3-9-15 Sannomiya-cho, Chuo-ku, Kobe, Hyogo, 650-0021 (Japan); Kamei, T. [Research Inst. for Applied Sciences, 49 Tanaka Ohicho, Sakyo-ku, Kyoto-shi, Kyoto, 606-8202 (Japan)

2012-07-01T23:59:59.000Z

299

STATEMENT OF WORK  

National Nuclear Security Administration (NNSA)

PART III - SECTION J APPENDIX B STATEMENT OF WORK Table of Contents 1.0 General.................................................................................................................... 273 2.0 Laboratory Mission and Scope of Work. ................................................................ 274 3.0 Science & Technology. ........................................................................................... 275 3.1 Defense Programs. .................................................................................................. 276 3.1.1 Stewardship of United States Nuclear Weapons. ................................................ 276 3.1.1.1 Stockpile Certification. .......................................................................................

300

Trails Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Trails Working Group Trails Working Group Trails Working Group Our mission is to inventory, map, and prepare historical reports on the many trails used at LANL. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email The LANL Trails Working Group inventories, maps, and prepares historical reports on the many trails used at LANL. Some of these trails are ancient pueblo footpaths that continue to be used for recreational hiking today. Some serve as quiet and non-motorized alternatives between the Townsite and LANL or between technical areas. The Trails Working Group, established in December 2003, includes representatives from local citizen hiking groups, Los Alamos County, Forest Service, Park Service, Los Alamos National Laboratory and the NNSA Los

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Interagency Working Groups (IWGs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) are the primary USGCRP vehicles for implementing and coordinating research activities within and across agencies. These groups are critical to Program integration and in assessing the Program's progress. The working groups span a wide range of interconnected issues of climate and global change, and address major components of the Earth's environmental and human systems, as well as cross-disciplinary approaches for addressing these issues. IWGs correspond to program functions and are designed to bring agencies together to plan and develop coordinated activities, implement joint activities, and identify and fill gaps in the Program's plans. They allow public officials to communicate with each other on emerging directions within their agencies, on their stakeholder needs, and on best practices learned from agency activities. Together, these functions allow the agencies to work in a more coordinated and effective manner.

302

ORISE: Working with ORISE  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Institute for Science Education Oak Ridge Institute for Science Education Working with ORISE If you are interested in learning about how your agency can utilize the capabilities of the Oak Ridge Institute for Science and Education (ORISE) through a Work for Others agreement or a procurement contract, or if you are looking for career opportunities, the following information provides an explanation of how to work with ORISE. If you do not see an option that applies to your needs, please contact ORISE General Information. Work for Others For organizations and agencies that are not affiliated with U.S. Department of Energy (DOE), such groups still have the opportunity to partner with the Oak Ridge Institute for Science and Education (ORISE) through the DOE Work For Others (WFO) program. DOE's WFO program allows ORISE to support

303

Analyzing flow patterns in unsaturated fractured rock of YuccaMountain using an integrated modeling approach  

SciTech Connect

This paper presents a series of modeling investigations to characterize percolation patterns in the unsaturated zone of Yucca Mountain, Nevada, a proposed underground repository site for storing high-level radioactive waste. The investigations are conducted using a modeling approach that integrates a wide variety of moisture, pneumatic, thermal, and isotopic geochemical field data into a comprehensive three-dimensional numerical model through model calibration. This integrated modeling approach, based on a dual-continuum formulation, takes into account the coupled processes of fluid and heat flow and chemical isotopic transport in Yucca Mountain's highly heterogeneous, unsaturated fractured tuffs. In particular, the model results are examined against different types of field-measured data and used to evaluate different hydrogeological conceptual models and their effects on flow patterns in the unsaturated zone. The objective of this work to provide understanding of percolation patterns and flow behavior through the unsaturated zone, which is a crucial issue in assessing repository performance.

Wu, Yu-Shu; Lu, Guoping; Zhang, Keni; Pan, Lehua; Bodvarsson,Gudmundur S.

2003-11-03T23:59:59.000Z

304

Modeling of stratigraphic architectural patterns in extensional settings-towards a conceptual model  

Science Conference Proceedings (OSTI)

Our earlier studies on active continental extensional basins revealed that high-frequency changes in sea/lake-level, spatially heterogeneous subsidence/uplift and multiple sources of sediment supply with varying rates and directions are the main factors ... Keywords: differential subsidence, extensional basins, multiple sediment supply, stratigraphic architecture, stratigraphic simulations

Istvan Csato; Christopher G. St. C. Kendall

2002-04-01T23:59:59.000Z

305

CDIF-MHD generator system conceptual design. Final report  

DOE Green Energy (OSTI)

The objective of this Program is to conduct a conceptual design of an MHD Generator System (MHD) to be coupled to candidate development coal-fired MHD combustion chambers at the MHD Component Development and Integration Facility (CDIF) for the purpose of developing design techniques utilized for the design of large MHD generators. The MHD is to be designed for continuous operation. A hexagonal cross section, diagonal conducting wall configuration operating in the supersonic mixed impulse-reaction mode with an inlet Mach number of 1.59 and with a uniform magnetic field of four Tesla throughout were selected. The design operating conditions and performance are presented, and a design analysis is included. (WHK)

Not Available

1977-03-01T23:59:59.000Z

306

A conceptual design of the 2+ MW LBNE beam absorber  

SciTech Connect

The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility will aim a beam of neutrinos, produced by 60-120 GeV protons from the Fermilab Main Injector, toward a detector placed at the Deep Underground Science and Engineering Laboratory (DUSEL) in South Dakota. Secondary particles that do not decay into muons and neutrinos as well as any residual proton beam must be stopped at the end of the decay region to reduce noise/damage in the downstream muon monitors and reduce activation in the surrounding rock. This goal is achieved by placing an absorber structure at the end of the decay region. The requirements and conceptual design of such an absorber, capable of operating at 2+ MW primary proton beam power, is described.

Velev, G.; Childress, S.; Hurh, P.; Hylen, J.; Makarov, A.; Mohkhov, N.; Moore, C.D.; Novitski, I.; /Fermilab

2011-03-01T23:59:59.000Z

307

Conceptual designs for modular OTEC SKSS. Final report  

DOE Green Energy (OSTI)

This volume presents the results of the first phase of the Station Keeping Subsystem (SKSS) design study for 40 MW/sub e/ capacity Modular Experiment OTEC Platforms. The objectives of the study were: (1) establishment of basic design requirements; (2) verification of technical feasibility of SKSS designs; (3) identification of merits and demerits; (4) estimates of sizes for major components; (5) estimates of life cycle costs; (6) deployment scenarios and time/cost/risk assessments; (7) maintenance/repair and replacement scenarios; (8) identifications of interface with other OTEC subsystems; (9) recommendations for and major problems in preliminary design; and (10) applicability of concepts to commercial plant SKSS designs. A brief site suitability study was performed with the objective of determining the best possible location at the Punta Tuna (Puerto Rico) site from the standpoint of anchoring. This involved studying the vicinity of the initial location in relation to the prevailing bottom slopes and distances from shore. All subsequent studies were performed for the final selected site. The two baseline OTEC platforms were the APL BARGE and the G and C SPAR. The results of the study are presented in detail. The overall objective of developing two conceptual designs for each of the two baseline OTEC platforms has been accomplished. Specifically: (1) a methodology was developed for conceptual designs and followed to the extent possible. At this stage, a full reliability/performance/optimization analysis based on a probabilistic approach was not used due to the numerous SKSS candidates to be evaluated. A deterministic approach was used. (2) For both of the two baseline platforms, the APL BARGE and the G and C SPAR, all possible SKSS candidate concepts were considered and matrices of SKSS concepts were developed.

None

1980-02-29T23:59:59.000Z

308

Ultra-Supercritical Pressure CFB Boiler Conceptual Design Study  

SciTech Connect

Electric utility interest in supercritical pressure steam cycles has revived in the United States after waning in the 1980s. Since supercritical cycles yield higher plant efficiencies than subcritical plants along with a proportional reduction in traditional stack gas pollutants and CO{sub 2} release rates, the interest is to pursue even more advanced steam conditions. The advantages of supercritical (SC) and ultra supercritical (USC) pressure steam conditions have been demonstrated in the high gas temperature, high heat flux environment of large pulverized coal-fired (PC) boilers. Interest in circulating fluidized bed (CFB) combustion, as an alternative to PC combustion, has been steadily increasing. Although CFB boilers as large as 300 MWe are now in operation, they are drum type, subcritical pressure units. With their sizes being much smaller than and their combustion temperatures much lower than those of PC boilers (300 MWe versus 1,000 MWe and 1600 F versus 3500 F), a conceptual design study was conducted herein to investigate the technical feasibility and economics of USC CFB boilers. The conceptual study was conducted at 400 MWe and 800 MWe nominal plant sizes with high sulfur Illinois No. 6 coal used as the fuel. The USC CFB plants had higher heating value efficiencies of 40.6 and 41.3 percent respectively and their CFB boilers, which reflect conventional design practices, can be built without the need for an R&D effort. Assuming construction at a generic Ohio River Valley site with union labor, total plant costs in January 2006 dollars were estimated to be $1,551/kW and $1,244/kW with costs of electricity of $52.21/MWhr and $44.08/MWhr, respectively. Based on the above, this study has shown that large USC CFB boilers are feasible and that they can operate with performance and costs that are competitive with comparable USC PC boilers.

Zhen Fan; Steve Goidich; Archie Robertson; Song Wu

2006-06-30T23:59:59.000Z

309

A Global Model of Technological Utilization Based on Governmental, Business-Investment, Social, and Economic Factors  

Science Conference Proceedings (OSTI)

This exploratory paper presents a conceptual model of the factors of governmental support and openness, business and technology investment, and socioeconomic level that are posited to influence technological utilization. The conceptual model and conjectures ... Keywords: Global Digital Divide, Government Investment, Societal Openness, Socioeconomic Factors, Structural Equation Modeling, Technological Utilization

James Pick; Rasool Azari

2011-07-01T23:59:59.000Z

310

Work Authorization System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington, D.C. DOE O 412.1A Approved: 4-21-05 This directive was reviewed and certified as current and necessary by Susan J. Grant, Director, Office of Management, Budget and Evaluation/Chief Financial Officer, 4-21-05. SUBJECT: WORK AUTHORIZATION SYSTEM 1. OBJECTIVES. To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. 2. CANCELLATIONS. DOE O 412.1 Work Authorization System, dated 4-20-99. Cancellation of a directive does not, by itself, modify or otherwise affect any contractual

311

How Hybrids Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Hybrids Work How Hybrids Work Diagram of full hybrid vehicle components, including (1) an internal combustion engine, (2) an electric motor, (3) a generator, (4) a power split device, and (5) a high-capacity battery. Flash Animation: How Hybrids Work (Requires Flash 6.0 or higher) HTML Version: How Hybrids Work Hybrid-electric vehicles (HEVs) combine the benefits of gasoline engines and electric motors and can be configured to obtain different objectives, such as improved fuel economy, increased power, or additional auxiliary power for electronic devices and power tools. Some of the advanced technologies typically used by hybrids include Regenerative Braking. The electric motor applies resistance to the drivetrain causing the wheels to slow down. In return, the energy from the

312

Working, Living, and Belonging  

E-Print Network (OSTI)

and Belonging June 28, 2013 Noah D. Zatz, UCLA, and EileenUniversity Press, 1998). Noah D. Zatz, "Working at theUniversity Press, 2012); Noah D. Zatz, "The Impossibility of

Zatz, Noah; Boris, Eileen

2013-01-01T23:59:59.000Z

313

NREL: Working for NREL  

NLE Websites -- All DOE Office Websites (Extended Search)

Working for NREL Working for NREL We're always on the lookout for talented people who believe in our mission and support our values. NREL's inclusive work environment benefits from diversity throughout the organization, values individual differences, and encourages employees to develop and contribute to their full potential. Working for NREL is a challenging and exciting experience for nearly 2,300 staff members of all backgrounds. We offer competitive salaries and excellent benefits. NREL Mission While our cultures and creeds, and lifestyles and languages may differ, we share a common desire to carry out our mission- To develop renewable energy and energy efficiency technologies and practices, To advance related science and engineering, and To transfer knowledge and innovations to address the nation's energy

314

Application and performance analysis of neural networks for decision support in conceptual design  

Science Conference Proceedings (OSTI)

This paper analyzes the use of feedforward multilayer perceptron neural networks in the support of the decision process during the conceptual design phase of engineering systems. A user friendly software tool is proposed in order to increase the quality ... Keywords: Conceptual design, Decision support, Neural networks

Ivo M. L. Ferreira; Paulo J. S. Gil

2012-07-01T23:59:59.000Z

315

A Conceptual Framework of Service Innovation and Its Implications for Future Research  

Science Conference Proceedings (OSTI)

The service sector is the most important and fastest growing business sector of developed countries nowadays. However, a lack of conceptual foundation for service science and service innovation is identified. This paper aims at closing this gap, indicating ... Keywords: Conceptual Framework, Service Innovation, Service Science, Service-dominant Logic

Sven Schwarz; Carolin Durst; Freimut Bodendorf

2012-07-01T23:59:59.000Z

316

DOE Makes Available $8 Million for Pre-Conceptual Design of Next Generation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Makes Available $8 Million for Pre-Conceptual Design of Next Makes Available $8 Million for Pre-Conceptual Design of Next Generation Nuclear Plants DOE Makes Available $8 Million for Pre-Conceptual Design of Next Generation Nuclear Plants September 28, 2006 - 9:01am Addthis WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today announced that DOE's Idaho National Laboratory (INL) will make awards valued at about $8 million to three companies to perform engineering studies and develop a pre-conceptual design to guide research on the Next Generation Nuclear Plant (NGNP). The INL will issue a contract later this week to Westinghouse Electric Company for the pre-conceptual design of the NGNP, and will later issue contracts to AREVA NP and General Atomics to perform complimentary engineering studies in the areas of technology and design

317

Water+works : a new ecological infrastructure  

E-Print Network (OSTI)

With the global water crisis as catalyst, Water+Works acts as a model for a localized water initiative that will mitigate flooding and provide a freshwater resource in times of crisis, while enriching urban ecosystems and ...

Hedstrom, Lisa Kristin

2011-01-01T23:59:59.000Z

318

Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Series LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It NeighborWorks of Western Vermont (NWWVT), a nonprofit home ownership organization...

319

Mon Valley work plan  

Office of Legacy Management (LM)

GWSHP 1.8 GWSHP 1.8 U.S. Department of Energy UMTRA Ground Water Project Work Plan for Characterization Activities at the Shiprock UMTRA Project Site June 1998 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number UGW-511-0020-01-000 Document Number U0013400 Work Performed under DOE Contract No. DE-AC13-96GJ87335 Note: Some of the section page numbers in the Table of Contents may not correspond to the page on which the section appears when viewing them in Adobe Acrobat. Document Number U0013400 Contents DOE/Grand Junction Office Work Plan for Characterization Activities at Shiprock Project Site June 1998 Draft Final Page v Contents Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1.0 Introduction .

320

How Fuel Cells Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Fuel Cells Work How Fuel Cells Work Diagram: How a PEM fuel cell works. 1. Hydrogen fuel is channeled through field flow plates to the anode on one side of the fuel cell, while oxygen from the air is channeled to the cathode on the other side of the cell. 2. At the anode, a platinum catalyst causes the hydrogen to split into positive hydrogen ions (protons) and negatively charged electrons. 3. The Polymer Electrolyte Membrane (PEM) allows only the positively charged ions to pass through it to the cathode. The negatively charged electrons must travel along an external circuit to the cathode, creating an electrical current. 4. At the cathode, the electrons and positively charged hydrogen ions combine with oxygen to form water, which flows out of the cell.

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

ORISE: Work Smart Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Smart Standards Work Smart Standards ORISE Work Smart Standards Set for Environment, Safety, and Health Revision #1, March 21, 2000 Revision #2, Sept. 29, 2000 Revision #3, June 28, 2001 Revision #4, Nov. 9, 2001 Revision #5, Nov. 30, 2001 Revision #6, Jan. 31, 2002 Revision #7, June 28, 2002 Revision #8, Oct. 17, 2002 Revision #9, Nov. 21, 2002 Revision #10, Feb. 28, 2003 Revision #11, May 23, 2003 Revision #12, May 30, 2003 Revision #13, Oct. 30, 2003 Revision #14, Jan. 21, 2004 Revision #15, May 24, 2004 Revision #16, Aug. 17, 2004 Revision #17, Aug. 27, 2004 Revision #18, Oct. 14, 2004 Revision #19, March 28, 2005 Revision #20, May 31, 2005 Revision #21, Aug. 24, 2005 Revision #22, Feb. 17, 2006 Revision #23, March 22, 2006 Revision #24, May 19, 2006 Revision #25, July 26, 2006 Revision #26, Nov. 28, 2006

322

Working with NIST  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST NIST Terry Lynch Office of Technology Partnerships How to Work with NIST How to Work with NIST „ „ Standards Standards „ „ Collaborative Research & Technology Devolvement Collaborative Research & Technology Devolvement Programs Programs „ „ Invention Licensing Invention Licensing Collaborative Research & Technology Collaborative Research & Technology Development Programs Development Programs „ „ Informal collaboration involving intramural research programs Informal collaboration involving intramural research programs „ „ Guest Research Agreements Guest Research Agreements „ „ Facility Use Agreements Facility Use Agreements „ „ Material Transfer Agreements Material Transfer Agreements „ „ Cooperative Research and Development Agreements (CRADA

323

Modeling  

Science Conference Proceedings (OSTI)

February 17, 2010. Room: 620. Location: Washington State Convention Center ... In this paper an overview of the work done by the team over a decade is ...

324

Ropes for Live Working  

Science Conference Proceedings (OSTI)

Fiber ropes represent an essential tool in many applications associated with the electric power industry. Ropes used in proximity to or in contact with high-voltage power lines require demanding dielectric properties as well as strength and durability. A comprehensive understanding of live working (LW) rope construction, performance, and use is necessary for safe and efficient operations wherever such ropes are used.

2008-11-18T23:59:59.000Z

325

METHOD OF WORKING BERYLLIUM  

DOE Patents (OSTI)

>A process is presented for fabricating beryllium metal. The billet cf beryllium metal is sheathed with a jacket of either copper or stainless steel. It may then be worked by drawing or the like at a tcmperature of 300 to 400 C.

Macherey, R.E.

1959-02-01T23:59:59.000Z

326

Work Package Templates  

Science Conference Proceedings (OSTI)

Work Package Templates provides fossil plant maintenance personnel with assorted inspection, minor repair or overhaul templates for various pieces of plant equipment. This guide will assist plant maintenance personnel in improving the efficiency, reliability and reducing the maintenance costs for associated with maintenance on selected pieces of equipment.

2007-02-15T23:59:59.000Z

327

Working group 1: Coronal streamers  

SciTech Connect

The working group on colonel streamers convened on the first day of the 2nd SOHO Workshop, which took place in Marciana Marina, Isola d`Elba, 27 September--1 October 1993. Recent progress in streamer observational techniques and theoretical modeling was reported. The contribution of streamers to the mass and energy supply for the solar wind was discussed. Moreover, the importance of thin electric current sheets for determining both the gross dynamical properties of streamers and the fine-scale filamentary structure within streamers, was strongly emphasized. Potential advances to our understanding of these areas of colonel physics that could be made by the contingent of instruments aboard SOHO were pointed out.

Kopp, R.A.

1994-04-01T23:59:59.000Z

328

The Substantive Validity of Work Performance Measures: Implications for Relationships Among Work Behavior Dimensions and Construct-Related Validity  

E-Print Network (OSTI)

Performance measurement and criterion theory are critical topics in the fields of I/O psychology, yet scholars continue to note several issues with the criterion, including empirically redundant behaviors, construct and measure proliferation, and definitions that conflict. These interconnected problems hinder the advancement of criterion measurement and theory. The goal of this study was to empirically examine the issues of theory/construct clarity and measurement as they exist regarding work performance behaviors. This study's first objective was to clarify definitions of core performance behaviors, particularly to resolve issues of construct proliferation and conceptual conflict. Universal definitions of four core criterion constructs (i.e., task performance, citizenship performance, counterproductive work behavior, and withdrawal) were developed that integrated existing definitions of similar behaviors. Each definition reflects a parsimonious conceptualization of existing performance behaviors, which serves to clarify existing, and at times divergent, criterion conceptualizations. Importantly, these integrated definitions represent commonly-held definitions of the constructs and replace the largely discrepant accumulation of definitions. The second objective was to determine whether existing items assumed to measure the four core work performance behaviors were judged by raters to represent their respective constructs. The results showed that of the 851 items examined, over half were judged to not represent their respective constructs which, importantly, replicated previous research. Additionally, the results highlight items that match their respective construct definition and contain minimal overlap with non-posited constructs. Finally, the third objective was to determine the implications of using the problematic items for both the empirical relationships among work performance behaviors and evidence of construct-related validity. The results provided preliminary evidence that while nomological networks are minimally affected, relationships among some work performance dimensions are significantly affected when problematic items are removed from measures of performance constructs. This dissertation demonstrated the need for more attention to the construct labels placed on the behaviors described in work performance items, as there are potentially adverse consequences for theory and measurement. Ultimately, the results of this study showed that work performance behaviors/items have often been assigned incorrect construct labels which, subsequently, may cast considerable doubt on the theoretical and empirical understanding of the criterion domain.

Carpenter, Nichelle

2012-08-01T23:59:59.000Z

329

Majorana One-Tonne Cryostat Cooling Conceptual Feasibility Study Rev 1  

SciTech Connect

This report evaluates the conceptual plans for a cryostat cooling design for the MAJORANA DEMONSTRATOR (MJD) one-tonne (S4) experiment. This document is based upon previous design work and experimental results used to evaluate the current MJD thermal design. A feasibility study of a cooling system for S4 based on the MJD thermosiphon experiment is presented. The one-tonne experiment will be a scaled up version of the MJD. There will be many cryostats in the S4 experiment. In this document a cryostat with up to 19 strings of germanium crystals is analyzed. Aside from an extra outer ring of crystals, the geometry of the cryostat for S4 is very similar to that for the MJD thermosiphon experiment. The materials used in the fabrication of both of these ultra-low background experiments will be underground-electroformed copper. The current MJD uses a two-phase liquid-gas cooling system to provide constant operating temperature. This document presents a theoretical investigation of a cooling system for the S4 experiment and evaluates the heat transfer performance requirements for such a system.

Reid, Douglas J.; Fast, James E.; Orrell, John L.; Aguayo Navarrete, Estanislao

2011-06-27T23:59:59.000Z

330

25 kWe solar thermal stirling hydraulic engine system: Final conceptual design report  

DOE Green Energy (OSTI)

This report documents the conceptual design and analysis of a solar thermal free-piston Stirling hydraulic engine system designed to deliver 25 kWe when coupled to the 11-meter Test Bed Concentrator at Sandia National Laboratories. A manufacturing cost assessment for 10,000 units per year was made by Pioneer Engineering and Manufacturing. The design meets all program objectives including a 60,000-hr design life, dynamic balancing, fully automated control, >33.3% overall system efficiency, properly conditioned power, maximum utilization of annualized insolation, and projected production costs of $300/kW. The system incorporates a simple, rugged, reliable pool boiler reflux heat pipe to transfer heat from the solar receiver to the Stirling engine. The free-piston engine produces high-pressure hydraulic flow which powers a commercial hydraulic motor that, in turn, drives a commercial rotary induction generator. The Stirling hydraulic engine uses hermetic bellows seals to separate helium working gas from hydraulic fluid which provides hydrodynamic lubrication to all moving parts. Maximum utilization of highly refined, field proven commercial components for electric power generation minimizes development cost and risk. The engine design is based on a highly refined Stirling hydraulic engine developed over 20 years as a fully implantable artificial heart power source. 4 refs., 19 figs., 3 tabs.

Not Available

1988-01-01T23:59:59.000Z

331

Work plan for the remedial investigation/feasibility study-environmental assessment for the Colonie site, Colonie, New York  

SciTech Connect

This work plan has been prepared to document the scoping and planning process performed by the US Department of Energy (DOE) to support remedial action activities at the Colonie site. The site is located in eastern New York State in the town of Colonie near the city of Albany. Remedial action of the Colonie site is being planned as part of DOE's Formerly Utilized Sites Remedial Action Program. The DOE is responsible for controlling the release of all radioactive and chemical contaminants from the site. Under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), a remedial investigation/feasibility study (RI/FS) must be prepared to support the decision-making process for evaluating remedial action alternatives. This work plan contains a summary of information known about the site as of January 1988, presents a conceptual site model that identifies potential routes of human exposure to site containments, identifies data gaps, and summarizes the process and proposed studies that will be used to fill the data gaps. In addition, DOE activities must be conducted in compliance with the National Environmental Policy Act (NEPA), which requires consideration of the environmental consequences of a proposed action as part of its decision-making process. This work also describes the approach that will be used to evaluate potential remedial action alternatives and includes a description of the organization, project controls, and task schedules that will be employed to fulfill the requirements of both CERCLA and NEPA. 48 refs., 18 figs., 25 tabs.

Not Available

1990-06-01T23:59:59.000Z

332

Development based climate change adaptation and mitigation-conceptual...  

Open Energy Info (EERE)

analytical tools have been used in the studies including quantitative and qualitative scenario work as well as detailed micro-based analysis. The methodological conclusion that...

333

LIBRA-A light ion beam fusion reactor conceptual design  

Science Conference Proceedings (OSTI)

The LIBRA light ion beam fusion commercial reactor study is a self-consistent conceptual design of a 330 MWe power plant with an accompanying economic analysis. Fusion targets are imploded by 4-MJ-shaped pulses of 30 MeV Li ions at a rate of 3 Hz. The target gain is 80, leading to a yield of 320 MJ. The high intensity part of the ion pulse is delivered by 16 diodes through 16 separate z-pinch plasma channels formed in 100 torr of helium with trace amounts of lithium. The blanket is an array of porous flexible silicon carbide tubes with Li/sub 17/Pb/sub 83/ flowing downward through them. These tubes (INPORT units) shield the target chamber wall from both neutron damage and the shock overpressure of the target explosion. The target chamber is a right circular cylinder, 8.7 meters in diameter. The target chamber is ''self-pumped'' by the target explosion generated overpressure into a surge tank partially filled with liquid that surrounds the target chamber. This scheme refreshes the chamber at the desired 3 Hz frequency without excessive pumping demands. The blanket multiplication is 1.2 and the tritium breeding ratio is 1.4. The direct capital cost of LIBRA is estimated to be $2200/kWe. 12 refs., 9 figs., 1 tab.

Moses, G.A.; Kulcinski, G.L.; Bruggink, D.; Engelstad, R.; Lovell, E.; MacFarlane, J.; Musicki, Z.; Peterson, R.; Sawan, M.; Sviatoslavsky, I.

1988-01-01T23:59:59.000Z

334

Conceptual design of an in-vessel core catcher  

Science Conference Proceedings (OSTI)

An enhanced in-vessel core catcher is being designed and evaluated as part of a joint United States (US)–Korean International Nuclear Energy Research Initiative (INERI) investigating methods to insure retention of materials that may relocate to the lower head of a reactor vessel under severe accident conditions in advanced reactors. This enhanced core catcher design consists of several interlocking sections that are machined to fit together when inserted into the lower head. Each section of the core catcher consists of two material layers with an option to add a third layer (if deemed necessary): a base material, which has the capability to support and contain the mass of core materials that may relocate during a severe accident; an insulator coating material on top of the base material, which resists interactions with high-temperature core materials; and an optional coating on the bottom side of the base material to prevent any potential oxidation of the base material during the lifetime of the reactor. This paper summarizes results from thermal, flow, and structural analyses as well as initial scoping materials interaction tests that were completed to support the conceptual design of the core catcher.

Joy L. Rempe; D. L. Knudson; K. G. Condie; K. Y. Suh; F. B.Cheung; S. B. Kim

2004-05-01T23:59:59.000Z

335

Conceptual design of an RTG Facility Transportation System  

DOE Green Energy (OSTI)

The conceptual design of an Radioisotope Thermoelectric Generator (RTG) Facility Transportation System which is part of the overall RTG Transportation System has been completed and is described in detail. The Facility Transportation System serves to provide locomotion, cooling, shock protection and data acquisition for the RTG package during loading and unloading sequences. The RTG Facility Transportation System consists of a Transporter Subsystem, a Package Cooling Subsystem, and a Shock Limiting Transit Device Subsystem. The Transporter Subsystem is a uniquely designed welded steel cart combined with a pneumatically-driven hand tug for locomotion. The Package Cooling Subsystem provides five kilowatts of active liquid cooling via an on-board refrigeration system. The Shock limiting Transit Device Subsystem consists of a consumable honeycomb transit frame which provides shock protection for the 3855 kg (8500 LB) RTG package. These subsystems have been combined into an integrated system which will facilitate the unloading and loading of the RTG , of the Transport Trailer as well as meet ALARA radiation Package into and out exposure guidelines.

Black, S.J.; Gentzlinger, R.C.; Lujan, R.E.

1994-06-03T23:59:59.000Z

336

SCM Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

cloud microphysical parameterizations cloud microphysical parameterizations with SCM, CAPT and M-PACE observations X. Liu (PNNL) S. Xie, J. Boyle, S. Klein (LLNL) S. J. Ghan (PNNL) H. Morrison, A. Gettelman (NCAR) Goal: Improve Climate Model Parameterizations Tools: single column models (SCM) and DOE CCPP-ARM Parameterization Testbed (CAPT) (LLNL CAPT team) ARM measurements provide unique data for model evaluation and guidance for parameterization improvement Motivations Cloud microphysics in mixed-phase clouds has a significant impact on cloud radiative forcing, precipitation formation, etc. The treatment of mixed-phase clouds in most current climate models is often oversimplified Liquid/ice partitioning according to a temperature dependent function; Neglect ice nucleation and Bergeron-Findeisen

337

Public Works Transportation Infrastructure Study  

E-Print Network (OSTI)

Public Works Transportation Infrastructure Study Minneapolis City of Lakes Minneapolis Public Works Transportation Infrastructure Study #12;Public Works Transportation Infrastructure Study Minneapolis City Works Transportation Infrastructure Study Minneapolis City of Lakes Background: · Currently, funding

Minnesota, University of

338

Working With Berkeley Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with the Lab Working with the Lab A-Z Index Search Phone Book Comments Ernest Orlando Lawrence Berkeley National Laboratory Technology Transfer Patent Department Sponsored Projects Office Procurement: Doing Business with the Lab Visitor Information Scientififc Divisions and National User Facilities UC Campus-Labs Collaboration Programs Berkeley Lab stresses collaboration in everything we do. The Laboratory is involved in many research partnerships with private industry. Our mission also includes the transfer of Laboratory inventions to the private sector for rapid commercialization. The role of the Technology Transfer Office is to make technology and expertise developed here available to industry. Contact the Technology Transfer Office to pinpoint research areas of common interest, negotiate rights to Laboratory intellectual property, and to discuss current patent and copyright licensing opportunities.

339

Working Group Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Working Group Reports Special Working Session on the Role of Buoy Observations in the Tropical Western Pacific Measurement Scheme J. Downing Marine Sciences Laboratory Sequim, Washington R. M. Reynolds Brookhaven National Laboratory Upton, New York Attending W. Clements (TWPPO) F. Barnes (TWPPO) T. Ackerman (TWP Site Scientist) M. Ivey (ARCS Manager) H. Church J. Curry J. del Corral B. DeRoos S. Kinne J. Mather J. Michalsky M. Miller P. Minnett B. Porch J. Sheaffer P. Webster M. Wesely K. Zorika G. Zhang Focus of Discussion The session convened on March 2, with brief introductions by Bill Clements. The purpose of the session was to discuss the scientific merits of retrofitting TOGA/TAO buoys with shortwave radiometers. Three questions were posed at the outset of the session to focus the discussion.

340

HANFORD ENGINEER WORKS  

Office of Legacy Management (LM)

HANFORD ENGINEER WORKS HANFORD ENGINEER WORKS IJd *P-t - - ~~~ssiticatiC+n cwcetted rat G.E. NUCLEONICS PROJECT xi I ~@L.%&~--G-ENERAI,@ ELECTRIC z ,m ._.__.-. _ I--..-. By Authority of. COMPANY ._ Atmic Energy Commission Office of Hanford Dire&xl Operations Riohland, Washington Attention; Mr. Carleton Shugg, Manager ./ ALPKA-ROLLED EL'GIL%I jw -879 ' . *_ a. f' Richland, Washington February 6, 1948 , Thla Dclc.Jv-

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

CHA Guidelines Working Group  

E-Print Network (OSTI)

The Community Health Assessment Guidelines have been updated from the original document published in 1997. The revisions reflect various published sources, as well as accumulated experience with community health assessment within the province of Manitoba. Special thanks to the members of the CHA Guidelines Working Group, composed of representatives of regional health authorities from across the province and Manitoba Health and Healthy Living staff. These guidelines are made

Jody Allan; Sonia Busca Owczar; Ingrid Botting; Maggie Campbell; Bunmi Fatoye; Bill Funk; Tannis Erickson; Sue Lockhart; Ales Morga; Deborah Malazdrewicz; Leonie Stranc

2009-01-01T23:59:59.000Z

342

An ontological representation of public services: models, technologies and use cases  

Science Conference Proceedings (OSTI)

This paper presents our effort to "ontologize" a conceptual public service model in order to express in a formal way domain specific semantics and create a reusable service ontology for eGovernment applications. The conceptual model we have used comes ... Keywords: OWL, eGovernment, ontology, public administration service provision, semantic discovery, semantic web applications

Vassilios Peristeras; Sotirios K. Goudos; Nikolaos Loutas; Konstantinos Tarabanis

2009-09-01T23:59:59.000Z

343

A DSS Design Model for complex problems: Lessons from mission critical infrastructure  

Science Conference Proceedings (OSTI)

This paper presents a new DSS Design Model for complex, mission critical decision-making situations and its technical, conceptual, and partial empirical evaluation. The new model was derived from conceptual design research and through a deep qualitative ... Keywords: Complex adaptive systems, Decision support systems, Design, Electricity, Infrastructure, Knowledge management, Wicked decisions

Robb Klashner; Sameh Sabet

2007-04-01T23:59:59.000Z

344

Working paper in process  

E-Print Network (OSTI)

At its heart, this chapter presents a story about the future of manufacturing. This story is based on predictions about the future. Specifically, that (1) increasingly firms of all sizes will have access to high performance computing capabilities that will enable sophisticated modeling and simulation, (2) additive manufacturing will become commercially competitive across a wide range of industry sectors and will support the use of multiple materials, and (3) new business models that rely on IT will reduce the administrative overload of bidding, winning and delivering products and services. Together these combine to favor localization of manufacturing rather than today’s more centralized, economies-of-scale production models. A fourth trend – a rise in the number of hobbyists who become producers of one-off and small lot products – will change the definition of a “manufacturer ” and may, in fact return manufacturing to the garage. An information-technology driven transformation in the manufacturing sector is inevitable.

Irene J. Petrick, Ph.D.

2013-01-01T23:59:59.000Z

345

NSLS-II Proposal for Approval of Conceptual Design (CD-0)  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal for Approval of Conceptual Design (CD-0) CD0 cover This proposal is to construct and then operate a new National Synchrotron Light Source, NSLS-II, at Brookhaven National...

346

ToscanaJ: Conceptual Scaling of Many-Valued Contexts. In: same volume  

E-Print Network (OSTI)

Abstract. Toscana and Anaconda started a tradition of applying conceptual scaling to attribute-value data in the form of many-valued contexts. This tradition is continued with ToscanaJ and its editing tools. 1

Peter Becker

2005-01-01T23:59:59.000Z

347

Integrated simulation environment for unmanned autonomous systems: towards a conceptual framework  

Science Conference Proceedings (OSTI)

The paper initiates a comprehensive conceptual framework for an integrated simulation environment for unmanned autonomous systems (UAS) that is capable of supporting the design, analysis, testing, and evaluation from a "system of systems" perspective. ...

M. G. Perhinschi; M. R. Napolitano; S. Tamayo

2010-01-01T23:59:59.000Z

348

Conceptual design of an annular-fueled superheat boiling water reactor  

E-Print Network (OSTI)

The conceptual design of an annular-fueled superheat boiling water reactor (ASBWR) is outlined. The proposed design, ASBWR, combines the boiler and superheater regions into one fuel assembly. This ensures good neutron ...

Ko, Yu-Chih, Ph. D. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

349

Conceptual and computational basis for the quantification of margins and uncertainty.  

Science Conference Proceedings (OSTI)

In 2001, the National Nuclear Security Administration of the U.S. Department of Energy in conjunction with the national security laboratories (i.e, Los Alamos National Laboratory, Lawrence Livermore National Laboratory and Sandia National Laboratories) initiated development of a process designated Quantification of Margins and Uncertainty (QMU) for the use of risk assessment methodologies in the certification of the reliability and safety of the nation's nuclear weapons stockpile. This presentation discusses and illustrates the conceptual and computational basis of QMU in analyses that use computational models to predict the behavior of complex systems. Topics considered include (1) the role of aleatory and epistemic uncertainty in QMU, (2) the representation of uncertainty with probability, (3) the probabilistic representation of uncertainty in QMU analyses involving only epistemic uncertainty, (4) the probabilistic representation of uncertainty in QMU analyses involving aleatory and epistemic uncertainty, (5) procedures for sampling-based uncertainty and sensitivity analysis, (6) the representation of uncertainty with alternatives to probability such as interval analysis, possibility theory and evidence theory, (7) the representation of uncertainty with alternatives to probability in QMU analyses involving only epistemic uncertainty, and (8) the representation of uncertainty with alternatives to probability in QMU analyses involving aleatory and epistemic uncertainty. Concepts and computational procedures are illustrated with both notional examples and examples from reactor safety and radioactive waste disposal.

Helton, Jon Craig (Arizona State University, Tempe, AZ)

2009-06-01T23:59:59.000Z

350

Initial Scaling Studies and Conceptual Thermal Fluids Experiments for the Prismatic NGNP Point Design  

SciTech Connect

The objective of this report is to document the initial high temperature gas reactor scaling studies and conceptual experiment design for gas flow and heat transfer. The general approach of the project is to develop new benchmark experiments for assessment in parallel with CFD and coupled CFD/ATHENA/RELAP5-3D calculations for the same geometry. Two aspects of the complex flow in an NGNP are being addressed: (1) flow and thermal mixing in the lower plenum ("hot streaking" issue) and (2) turbulence and resulting temperature distributions in reactor cooling channels ("hot channel" issue). Current prismatic NGNP concepts are being examined to identify their proposed flow conditions and geometries over the range from normal operation to decay heat removal in a pressurized cooldown. Approximate analyses are being applied to determine key non-dimensional parameters and their magnitudes over this operating range. For normal operation, the flow in the coolant channels can be considered to be dominant forced convection with slight transverse property variation. The flow in the lower plenum can locally be considered to be a situation of multiple buoyant jets into a confined density-stratified crossflow -- with obstructions. Experiments are needed for the combined features of the lower plenum flows. Missing from the typical jet experiments are interactions with nearby circular posts and with vertical posts in the vicinity of vertical walls - with near stagnant surroundings at one extreme and significant crossflow at the other. Two heat transfer experiments are being considered. One addresses the "hot channel" problem, if necessary. The second experiment will treat heated jets entering a model plenum. Unheated MIR (Matched-Index-of-Refraction) experiments are first steps when the geometry is complicated. One does not want to use a computational technique which will not even handle constant properties properly. The MIR experiment will simulate flow features of the paths of jets as they mix in flowing through the array of posts in a lower plenum en route to the single exit duct. Initial conceptual designs for such experiments are described.

D. M. McEligot; G. E. McCreery

2004-09-01T23:59:59.000Z

351

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

, 2004 , 2004 By the Numbers WIPP marks five-year anniversary Shipments scheduled to arrive at WIPP for the week of 4/4/04 - 4/10/04: 18 Total shipments received at WIPP: 2,456 Total volume disposed at WIPP: 19,042 m 3 FY04 Performance Metrics D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A weekly e-newsletter for the Waste Isolation Pilot Plant team For those who endured the early morning cold of March 26, 1999, to witness WIPP's first shipment, it may seem like yesterday. Yet Friday marked five years of WIPP operations. Relative newcomer to WIPP - but not to the waste management industry - CBFO Deputy Manager Lloyd Piper observed, "The transformation from a facility in "standby" mode to operational mode has been nothing short of amazing."

352

Emergent meaning in affective space: Congruent conceptual relations and spatial relations produce positive evaluations  

E-Print Network (OSTI)

Emergent Meaning in Affective Space: Conceptual and Spatial Congruence Produces Positive Evaluations Simone Schnall (schnall@virginia.edu) University of Virginia, Department of Psychology, 102 Gilmer Hall Charlottesville, VA 22904 USA... Gerald L. Clore (gclore@virginia.edu) University of Virginia, Department of Psychology, 102 Gilmer Hall Charlottesville, VA 22904 USA Abstract Based on the theory of conceptual metaphor we investigated the evaluative consequences of a match...

Schnall, Simone; Clore, Gerald L.

2004-01-01T23:59:59.000Z

353

Advanced conceptual design report. Phase II. Liquid effluent treatment and disposal Project W-252  

Science Conference Proceedings (OSTI)

This Advanced Conceptual Design Report (ACDR) provides a documented review and analysis of the Conceptual Design Report (CDR), WHC-SD-W252-CDR-001, June 30, 1993. The ACDR provides further design evaluation of the major design approaches and uncertainties identified in the original CDR. The ACDR will provide a firmer basis for the both the design approach and the associated planning for the performance of the Definitive Design phase of the project.

NONE

1995-01-31T23:59:59.000Z

354

End of Month Working  

Gasoline and Diesel Fuel Update (EIA)

The level of gas in storage at the end of the last heating season (March The level of gas in storage at the end of the last heating season (March 31, 2000) was 1,150 billion cubic feet (Bcf), just above the 1995-1999 average of 1,139 Bcf. Underground working gas storage levels are currently about 8-9 percent below year-ago levels. In large part, this is because injection rates since April 1 have been below average. Storage injections picked up recently due to warm weather in the last half of October. The month of November is generally the last month available in the year for injections into storage. A cold November would curtail net injections into storage. If net injections continue at average levels this winter, we project that storage levels will be low all winter, reaching a level of 818 Bcf at the end of March, the lowest level since 1996

355

Work Force Restructuring Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Force Restructuring Activities Force Restructuring Activities December 10, 2008 Note: Current updates are in bold # Planned Site/Contractor HQ Approved Separations Status General * LM has finalized the compilation of contractor management team separation data for the end of FY07 actuals and end of FY08 and FY09 projections. LM has submitted to Congress the FY 2007 Annual Report on contractor work force restructuring activities. The report has been posted to the LM website. *LM conducted a DOE complex-wide data call to the Field and Operations offices for DOE Contractor Management teams to provide, by program, actual contractor separation data for the end of FY 2008 and projections for the end of FY 2009 and FY 2010. The data will be used to keep senior management informed of upcoming large WFR actions.

356

Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-SOL-0003174 1 FOR OFFICIAL USE ONLY - SOURCE SELECTION SENSITIVE, SEE FAR 3.104-3 PERFORMANCE WORK STATEMENT (PWS) Emergency Operations Training Academy (EOTA) Support Services May 27, 2011 Draft 1.0 Introduction The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), Office of Emergency Operations (NA-40) requires support services in the development and delivery of training, exercises, and other related technical and administrative support services at the Emergency Operations Training Academy (EOTA) in Albuquerque, New Mexico. 2.0 Background NA-40's mission is to ensure that capabilities are in place to respond to any NNSA and DOE facility emergency. NA-40 is the nation's premier responder to any nuclear or radiological

357

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

8, 2012 8, 2012 WIPP Quick Facts (As of 9-26-12) 10,849 Shipments received since opening (10,252 CH and 597 RH) 83,693 Cubic meters of waste disposed (82,394 CH and 299 RH) 162,472 Containers disposed in the underground (161,882 CH and 590 RH) Photo above right: CBFO Deputy Manager Ed Ziemianski presents a WIPP team with the Green Zia Program Silver Level Award from the New Mexico Environment Department on Aug. 15, 2012 in recognition of environmental initiatives. Shown right of Ziemianski is Farok Sharif, WTS President and General Manager. New WIPP Management and Operating Contractor to start October 1 Nuclear Waste Partnership LLC (NWP) will start work as the WIPP Management and Operating Contractor on Monday, October 1. WIPP receives Green Zia Award The Waste Isolation Pilot Plant (WIPP), the U.S. Department of Energy (DOE)

358

COMMENTARY Making sustainability work  

E-Print Network (OSTI)

Today’s economic theory usually neglects the role of nature and environment. To make sustainability work it is, however, essential to (re-)integrate nature into the standard concepts of economics, especially by incorporating natural factors into the production function. It must be acknowledged that economic growth is not (only) the result of technical change but is mainly caused by rising energy-inputs into the economy, and that this is necessarily followed by resource exhaustion and pollution. Therefore, nature must not only be taken into account as a central factor of production but also in the form of environmental quality which is the basis for human quality of life. A numeric example shows that a small, but steady decrease of yearly resource consumption is already apt to redirect the economy on a path of sustainable development. © 1998 Elsevier Science B.V. All rights reserved. Keywords: Sustainable development; Economic theory of production; Economic growth; Technical change; Non-renewable resources

Hans Christoph Binswanger

1996-01-01T23:59:59.000Z

359

Working With FEERC  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms For Partnering Mechanisms For Partnering with the Fuels, Engines, and Emissions Research Center at the Oak Ridge National Laboratory Oak Ridge National Laboratory (ORNL) has a program designed to provide technology-based solutions to organizations ranging from startups to Fortune 100 companies to academic institutions. Underlying this philosophy is our belief that strong partnerships with U.S. industry are the best way to share technological know-how with the private sector. Regardless of the activity-entering into a Cooperative Research and Development Agreement (CRADA) or Work for Others (WFO) agreement, or interacting with an industry or university through other means-we are committed to outcomes that create beneficial opportunities for the external organization as well as

360

Models  

E-Print Network (OSTI)

• A very typical statistical/econometric model assumes something like yt ? i.i.d. f (y, x, ?) (1) where f (·) is a parametric family known up to parameters ?. • Parameter estimation: maximum likelihood ˆ?n = arg max ? ln f (Yt, Xt, ?) (2) t • What if the basic model assumptions of (1) are violated? The parametric family may not contain the true model f0(x, y) that generated the data; or the data may not be i.i.d.; etc. Misspecified

Stas Kolenikov; U Of Missouri; U Of Missouri

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

CONCEPTUAL DESIGN REPORT FOR A FAST MUON TRIGGER  

SciTech Connect

This document is a Conceptual Design Report for a fast muon trigger for the PHENIX experiment that will enable the study of flavor separated quark and anti-quark spin polarizations in the proton. A powerful way of measuring these polarizations is via single spin asymmetries for W boson production in polarized proton-proton reactions. The measurement is done by tagging W{sup +} and W{sup -} via their decay into high transverse momentum leptons in the forward directions. The PHENIX experiment is capable of measuring high momentum muons at forward rapidity, but the current online trigger does not have sufficient rejection to sample the rare leptons fromW decay at the highest luminosities at the Relativistic Heavy Ion Collider (RHIC). This Report details the goals, design, R&D, and schedule for building new detectors and trigger electronics to use the full RHIC luminosity to make this critical measurement. The idea for W boson measurements in polarized proton-proton collisions at RHIC was first suggested by Jacques Soffer and Claude Bourrely in 1995. This prompted the RIKEN institute in Japan to supply funds to build a second muon arm for PHENIX (south muon arm). The existence of both a north and south muon arm makes it possible to utilize a Z{sup 0} sample to study and control systematic uncertainties which arise in the reconstruction of high momentum muons. This document has its origins in recommendations made by a NSAC Subcommittee that reviewed the U.S. Heavy Ion Physics Program in June 2004. Part of their Recommendation 1 was to 'Invest in near-term detector upgrades of the two large experiments, PHENIX and STAR'. In Recommendation 2 the subcommittee stated '- detector improvements proceed at a rate that allows a timely determination of the flavor dependence of the quark-antiquark sea polarization through W-asymmetry measurements' as we are proposing here. On September 13, 2004 DOE requested from BNL a report articulating a research plan for the RHIC spin physics program. The document was submitted to DOE on January 31, 2005. It pointed out that one of three top priorities for the program lies in the clean and elegant measurement of the quark and anti-quark polarizations sorted by quark flavor through the parity-violating production of W bosons.

OBRIEN,E.; BASYE, A.; ISENHOWER, D.; JUMPER, D.; SPARKS, N.; TOWELL, R.; WATTS, C.; WOOD, J.; WRIGHT, R.; HAGGERTY, J.; LYNCH, D.; BARISH, K.; EYSER, K.O.; SETO, R.; HU, S.; LI, X.; ZHOU, S.; GLENN, A.; KINNEY, E.; KIRILUK, K.; NAGLE, J.; CHI, C.Y.; SIPPACH, W.; ZAJC. W.; BUTLER, C.; HE, X.; OAKLEY, C.; YING, J.; BLACKBURN, J.; CHIU, M.; PERDEKAMP, M.G.; KIM, Y.J.; KOSTER, J.; LAYTON, D.; MAKINS, N.; MEREDITH, B.; NORTHACKER, D.; PENG, J.-C.; SEIDL, R.; THORSLAND, E.; WADHAMS, S.; WILLIAMSON, S.; YANG, R.; HILL, J.; KEMPEL, T.; LAJOIE, J.; SLEEGE, G.; VALE, C.; WEI, F.; SAITO, N.; HONG, B.; KIM, B.; LEE, K.; LEE, K.S.; PARK, S.; SIM, K.-S.; AOKI, K.; DAIRAKU, S.; IMAI, K.; KARATSU, K.; MURAKAMI, T.; SATO, A.; SENZAKA, K.; SHOJI, K.; TANIDA, K.; BROOKS, M.; LEITCH, M.; ADAMS, J.; CARINGI, A.; FADEM, B.; IDE, J.; LICHTENWALNER, P.; FIELDS, D.; MAO, Y.; HAN, R.; BUNCE, G.; XIE, W.; FUKAO, Y.; TAKETANI, A.; KURITA, K.; MURATA, J.; (PHENIX COLLABORATION)

2007-08-01T23:59:59.000Z

362

A process for creating Celtic knot work  

E-Print Network (OSTI)

Celtic art contains mysterious and fascinating aesthetic elements including complex knot work motifs. The problem is that creating and exploring these motifs require substantial human effort. One solution to this problem is to create a process that collaboratively uses interactive and procedural methods within a computer graphic environment. Spline models of Celtic knot work can be interactively modeled and used as input into procedural shaders. Procedural shaders are computer programs that describe surface, light, and volumetric appearances to a renderer. The control points of spline models can be used to drive shading procedures such as the coloring and displacement of surface meshes. The result of this thesis provides both an automated and interactive process that is capable of producing complex interlaced structures such as Celtic knot work within a three-dimensional environment.

Parks, Hunter Guymin

2005-05-01T23:59:59.000Z

363

Testing executive function models of ADHD and its comorbid conditions: A latent variable approach  

E-Print Network (OSTI)

Current theoretical models of ADHD (i.e., Disinhibition Model: Barkley, 1997; Working Memory Model: Rapport et al., 2001) conceptualize ADHD as the disorder of executive function (EF) with some variation in their emphases on particular components of the broadly-defined EF (e.g., working memory vs. inhibition) and in their postulated relationships with ADHD symptoms. Although these models provide systematic accounts of the manifestation of ADHD, they have not been extensively tested from an empirical standpoint. Moreover, despite the fact that ADHD is highly comorbid with other additional conditions such as learning and behavioral problems and EF deficits are found in individuals with these conditions as well as in those with ADHD, current EF models have not specified the developmental relationship between ADHD and its comorbid conditions. This study was: (1) to examine the extent to which two current models of ADHD are supported in a sample of 102 adults; (2) to present an ??integrated?? model by combining two current models of ADHD and linking them to recent research findings on two common comorbid conditions with ADHD (i.e., reading difficulty and substance abuse); and (3) to test and revise such an integrated model in the light of data using a latent variable analysis. Major findings provided a strong support for the Working Memory Model with a lesser degree of support for the Disinhibition Model. Preliminary evidence of working memory as the primary deficit in ADHD was also obtained in the present sample. Finally, the integrated EF model and its revised model (final model) demonstrated a very good fit to the data. These findings suggest that the integrated model provides a unified account of how EF deficits contribute to the manifestation of ADHD symptoms and comorbid conditions with ADHD. Given some limitations (e.g., sample size and scope) of the present study, current findings need to be replicated.

Lee, Dong Hyung

2004-08-01T23:59:59.000Z

364

NSLS Committees | Interlock Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Interlock Working Group Charge The NSLS Interlock Working Group shall review all new construction and modification of NSLS and SDL personnel protection interlock systems. It is the...

365

Conceptual Design of Oxygen-Based PC Boiler  

Science Conference Proceedings (OSTI)

Coal is presently the world's primary fuel for generating electrical power and, being more abundant and less expensive than oil or natural gas, is expected to continue its dominance into the future. Coal, however, is more carbon intensive than natural gas and oil and consequently coal-fired power plants are large point source emitters of carbon dioxide (CO{sub 2}). Since CO{sub 2} is a greenhouse gas, which may have an adverse impact on the world's climate/weather patterns, studies have been conducted to determine the feasibility and economic impact of capturing power plant CO{sub 2} emissions for pipeline transport to a sequestration/storage site. The stack gas that exhausts from a modern coal-fired power plant typically contains about 15% CO{sub 2} on a dry volume basis. Although there are numerous processes available for removing CO{sub 2} from gas streams, gas scrubbing with amine solvent is best suited for this application because of the large gas volumes and low CO{sub 2} concentrations involved. Unfortunately the energy required to regenerate the solvent for continued use as a capturing agent is large and imposes a severe energy penalty on the plant. In addition this ''back end'' or post combustion cleanup requires the addition of large vessels, which, in retrofit applications, are difficult to accommodate. As an alternative to post combustion scrubbing, Foster Wheeler (FW) has proposed that the combustion process be accomplished with oxygen rather than air. With all air nitrogen eliminated, a CO{sub 2}-water vapor rich flue gas will be generated. After condensation of the water vapor, a portion of the flue gas will be recirculated back to the boiler to control the combustion temperature and the balance of the CO{sub 2} will be processed for pipeline transport. This proposed oxygen-carbon dioxide (O{sub 2}/CO{sub 2}) combustion process eliminates the need for CO{sub 2} removal/separation and reduces the cost of supplying a CO{sub 2} rich stream for sequestration. FW has developed a conceptual design of an O{sub 2} fired boiler to determine overall plant performance and economics. Five subtasks were conducted: (1) a literature review, (2) a system design and analysis, (3) a low NOx burner design and analysis, (4) a furnace and heat recovery area design analysis, and (5) an economic analysis. The objective of the literature search is to locate any data/information relevant to the Oxygen-Based PC Boiler conceptual design. The objective of the system design and analysis task is to optimize the PC boiler plant by maximizing system efficiency within practical considerations. Simulations of the oxygen-fired plant with CO{sub 2} sequestration were conducted using Aspen Plus and were compared to a reference air-fired 460 MW plant. Flue gas recycle is used in the O{sub 2}-fired PC to control the flame temperature. Parametric runs were made to determine the effect of flame temperature on system efficiency and required waterwall material and thickness. The degree of improvement on system efficiency of various modifications including hot gas recycle, purge gas recycle, flue gas feedwater recuperation, and recycle purge gas expansion were investigated. The selected O{sub 2}-fired design case has a system efficiency of 30.6% compared to the air-fired system efficiency of 36.7%. The design O{sub 2}-fired case requires T91 waterwall material and has a waterwall surface area of only 65% of the air-fired reference case. The objective of the low NOx burner design and analysis task is to optimize the burner design to ensure stable ignition, to provide safe operation, and to minimize pollutant formation. The burners were designed and analyzed using the Fluent CFD computer program. Four burner designs were developed: (1) with no OFG and 65% flue gas recycle, (2) with 20% OFG and 65% flue gas recycle, (3) with no OFG and 56% flue gas recycle and (4) with 20% OFG and 56% flue gas recycle. A 3-D Fluent simulation was made of a single wall-fired burner and horizontal portion of the furnace from the wall to the center. Without primary gas sw

Andrew Seltzer; Zhen Fan

2005-09-01T23:59:59.000Z

366

Will NIF Work  

E-Print Network (OSTI)

It is vital that new clean and abundant sources of energy be developed for the sustainability of modern society. Nuclear fusion of the hydrogen isotopes deuterium and tritium, if successful, might make a major contribution toward satisfying this need. The U.S. has an important effort aimed at achieving practical inertial confinement fusion, ICF, which has been under development for decades at the Lawrence Livermore National Laboratory. The National Ignition Facility (NIF) is a giant laser to multiply-shock and thus quasi-isentropically compress a capsule of deuterium-tritium (DT) to high density and temperature, where the fusion rate is proportional to density squared times temperature to the fourth power. The principal problem that must be solved for NIF to work successfully is elimination of the Rayleigh-Tailor (R-T) instability that originates from the interface between the solid shell and the DT fuel within it. The R-T instability poisons the fusion reaction by reducing the temperature of the DT achieved ...

Nellis, W J

2009-01-01T23:59:59.000Z

367

Analysing the Effects of Incentives and Model Attributes on CAD Model Creation and Alteration  

E-Print Network (OSTI)

Modern computer-aided design (CAD) systems have contributed significantly towards product development cycle time reduction and product quality improvement. To enhance the performance of CAD systems engineers must be able to create CAD models of conceptual designs quickly; at the same time CAD models must be easy to alter, so as to accommodate the rapid changes that the design undergoes through the lifecycle. However, there is no agreement in the way CAD models should be created to accomplish these goals. This work attempts to assess the effects of incentives on CAD model attributes during model creation and alteration; the effects of CAD model attributes on alteration are also investigated. Its aim is to derive prescriptions based on empirical evidence to improve CAD model creation and alteration efficiency. The CAD models under study are created by three sets of participants – students from a junior level CAD course, students from a senior level CAD course and experienced engineers involved in product development activities. The participants are incentivized to create and alter CAD models of designs they are provided with. The results indicate that upon removal of incentives, engineers (both students and professionals) tend to compromise on proper modeling procedures. Experts are quicker and adhere to commonly agreed correct modeling procedures during CAD model creation and alteration than students. The results also indicate that it is beneficial for alteration to construct a model with several simple features as opposed to a few complex features and that these features be fully constrained. Maintaining the traditional feature sequence improves the perception of the model. The retention and alteration of features (as opposed to deletion) is also shown to be positively correlated with model perception ratings.

Diwakaran, Ram Prasad

2010-12-01T23:59:59.000Z

368

Modeling-Computer Simulations At Obsidian Cliff Area (Hulen, Et Al., 2003)  

Open Energy Info (EERE)

Obsidian Cliff Area (Hulen, Et Al., 2003) Obsidian Cliff Area (Hulen, Et Al., 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Obsidian Cliff Area (Hulen, Et Al., 2003) Exploration Activity Details Location Obsidian Cliff Area Exploration Technique Modeling-Computer Simulations Activity Date Usefulness useful DOE-funding Unknown References Jeff Hulen, Denis Norton, Dennis Kaspereit, Larry Murray, Todd van de Putte, Melinda Wright (2003) Geology And A Working Conceptual Model Of The Obsidian Butte (Unit 6) Sector Of The Salton Sea Geothermal Field, California Retrieved from "http://en.openei.org/w/index.php?title=Modeling-Computer_Simulations_At_Obsidian_Cliff_Area_(Hulen,_Et_Al.,_2003)&oldid=388945" Category: Exploration

369

NATURAL GAS HYDRATES STORAGE PROJECT PHASE II. CONCEPTUAL DESIGN AND ECONOMIC STUDY  

SciTech Connect

DOE Contract DE-AC26-97FT33203 studied feasibility of utilizing the natural-gas storage property of gas hydrates, so abundantly demonstrated in nature, as an economical industrial process to allow expanded use of the clean-burning fuel in power plants. The laboratory work achieved breakthroughs: (1) Gas hydrates were found to form orders of magnitude faster in an unstirred system with surfactant-water micellar solutions. (2) Hydrate particles were found to self-pack by adsorption on cold metal surfaces from the micellar solutions. (3) Interstitial micellar-water of the packed particles were found to continue forming hydrates. (4) Aluminum surfaces were found to most actively collect the hydrate particles. These laboratory developments were the bases of a conceptual design for a large-scale process where simplification enhances economy. In the design, hydrates form, store, and decompose in the same tank in which gas is pressurized to 550 psi above unstirred micellar solution, chilled by a brine circulating through a bank of aluminum tubing in the tank employing gas-fired refrigeration. Hydrates form on aluminum plates suspended in the chilled micellar solution. A low-grade heat source, such as 110 F water of a power plant, circulates through the tubing bank to release stored gas. The design allows a formation/storage/decomposition cycle in a 24-hour period of 2,254,000 scf of natural gas; the capability of multiple cycles is an advantage of the process. The development costs and the user costs of storing natural gas in a scaled hydrate process were estimated to be competitive with conventional storage means if multiple cycles of hydrate storage were used. If more than 54 cycles/year were used, hydrate development costs per Mscf would be better than development costs of depleted reservoir storage; above 125 cycles/year, hydrate user costs would be lower than user costs of depleted reservoir storage.

R.E. Rogers

1999-09-27T23:59:59.000Z

370

This paper is part of the LBNL Clean Energy Program Policy Brief series. These working papers highlight emerging program models, important issues that new programs face, and how these issues are being addressed. To  

E-Print Network (OSTI)

This paper is part of the LBNL Clean Energy Program Policy Brief series. These working papers in this Policy Brief was funded by the Department of Energy Office of Energy Efficiency and Renewable Energy addressed. To join the email list to receive these policy briefs, please click HERE. The work described

371

Differential Effects of the Manipulation of Endoplasmic Reticulum Data Sets Using Image J Analysis Software for Conceptual Understanding in a College Biology Course  

E-Print Network (OSTI)

There has been an influx of funding in science, technology, engineering and mathematics (STEM) allocated to adapting educational systems that engage, motivate and train learners with new and innovative techniques. This exploratory research project investigated the student outcomes associated with undergraduate biology learner' engagements in the ER Project. Thirty-one students interacted in small groups within an inquiry-learning environment supported by an innovative technology that introduced a database of images of green florescent endoplasmic reticulum and golgi apparatus. The aim of the ER Project was to increase learners' conceptual understanding of cell structure and movement and engage in scientific processes in an authentic inquiry setting. To identify relationships between and among independent and dependent variables in a causal model hypothesizing relationships among Prior Knowledge, Learning Preference, Attitudes toward Computers, Inquiry Task Performance and Conceptual Understanding were tested using path analysis. The study found that while prior knowledge was a strong predictor for conceptual understanding, it was not as effective for observing the inquiry task performance. But, the Motivation towards Computers and their Inquiry Task Performance indicated that learners understood the scientific processes and were able to communicate their results.

Lane, Cleveland O., Jr.

2010-12-01T23:59:59.000Z

372

Parallel computing works  

Science Conference Proceedings (OSTI)

An account of the Caltech Concurrent Computation Program (C{sup 3}P), a five year project that focused on answering the question: Can parallel computers be used to do large-scale scientific computations '' As the title indicates, the question is answered in the affirmative, by implementing numerous scientific applications on real parallel computers and doing computations that produced new scientific results. In the process of doing so, C{sup 3}P helped design and build several new computers, designed and implemented basic system software, developed algorithms for frequently used mathematical computations on massively parallel machines, devised performance models and measured the performance of many computers, and created a high performance computing facility based exclusively on parallel computers. While the initial focus of C{sup 3}P was the hypercube architecture developed by C. Seitz, many of the methods developed and lessons learned have been applied successfully on other massively parallel architectures.

Not Available

1991-10-23T23:59:59.000Z

373

Intergovernmental Panel on Climate Change (IPCC), Working Group...  

NLE Websites -- All DOE Office Websites (Extended Search)

Intergovernmental Panel on Climate Change (IPCC), Working Group 1, 1994: Modelling Results Relating Future Atmospheric CO2 Concentrations to Industrial Emissions DB1009 data Data...

374

'Wisconsin works'?: race, gender and accountability in the workfare era.  

E-Print Network (OSTI)

??This project will offer an evaluative analysis of the Wisconsin Works (W-2) program as the model initiative within national welfare reform strategies. The purpose of… (more)

Baldwin, Bridgette

2010-01-01T23:59:59.000Z

375

ARM - Engineering Work Request & Engineering Work Order Guidelines  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Request & Engineering Work Request & Engineering Work Order Guidelines Page Contents: Introduction Discussion of the ARM Climate Research Facility Engineering Process: The Engineering Change Request (ECR) and the Engineering Change Order (ECO) Operations and Engineering Task Consulting: The Engineering Work Request (EWR) and the Engineering Work Order (EWO) Relationship of the ECR/ECO and EWR/EWO to the Engineering Task Tracking Tool Relationship of the ECR/ECO and EWR/EWO to the Existing Configuration Control Process in the ARM Climate Research Facility(PIF/CAR, PRR, ORR, and BCR) Glossary Frequently Asked Questions (PDF, 173K) Engineering Work Request & Engineering Work Order Guidelines Process Guidelines for the Engineering Change Request/Engineering Change Order and Engineering Work Request/Engineering Work Order

376

Research Highlights Sorted by Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group Working Group Aerosol Life Cycle | Cloud Life Cycle | Cloud-Aerosol-Precipitation Interactions | Aerosol | Cloud Modeling | Cloud Properties | Radiative Processes Aerosol Life Cycle 2013 Bhattacharya, A. Wildfires Lead to More Warming Than Climate Models Predict, a New Mexico Fire Study Reports ASR Fast, J. . Development and Validation of a Black Carbon Mixing State Resolved Three-Dimensional Model ARM ASR Gilles, M., Moffet, R. Spectro-microscopic Measurements of Carbonaceous Aerosol Aging in Central California ARM ASR Kafle, D. N., Coulter, R. L. Micropulse Lidar-Derived Aerosol Optical Depth Climatology at ARM Sites Worldwide ARM Keppel-Aleks, G. Determining the Future of CO2 Using an Earth System Model ARM Li, Z. A Mixed Bag of Aerosols over Northeastern China ARM

377

Systems Modeling | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Computational Physics Communication Networks and Technologies Modeling and Simulation Innovative Signal Processing Algorithms Advanced Control Systems Econometrics Engineering Analysis Behavioral Sciences Geographic Information Science and Technology Quantum Information Science Supercomputing and Computation Home | Science & Discovery | Supercomputing and Computation | Research Areas | Systems Modeling SHARE Systems Modeling System modeling is the interdisciplinary study of the use of models to conceptualize and construct systems. A common type of systems modeling is function modeling, with specific techniques such as the functional flow block diagram. These models can be extended using functional decomposition, and can be linked to requirements models for further systems

378

Application analysis of solar total energy systems to the residential sector. Volume III, conceptual design. Final report  

DOE Green Energy (OSTI)

The objective of the work described in this volume was to conceptualize suitable designs for solar total energy systems for the following residential market segments: single-family detached homes, single-family attached units (townhouses), low-rise apartments, and high-rise apartments. Conceptual designs for the total energy systems are based on parabolic trough collectors in conjunction with a 100 kWe organic Rankine cycle heat engine or a flat-plate, water-cooled photovoltaic array. The ORC-based systems are designed to operate as either independent (stand alone) systems that burn fossil fuel for backup electricity or as systems that purchase electricity from a utility grid for electrical backup. The ORC designs are classified as (1) a high temperature system designed to operate at 600/sup 0/F and (2) a low temperature system designed to operate at 300/sup 0/F. The 600/sup 0/F ORC system that purchases grid electricity as backup utilizes the thermal tracking principle and the 300/sup 0/F ORC system tracks the combined thermal and electrical loads. Reject heat from the condenser supplies thermal energy for heating and cooling. All of the ORC systems utilize fossil fuel boilers to supply backup thermal energy to both the primary (electrical generating) cycle and the secondary (thermal) cycle. Space heating is supplied by a central hot water (hydronic) system and a central absorption chiller supplies the space cooling loads. A central hot water system supplies domestic hot water. The photovoltaic system uses a central electrical vapor compression air conditioning system for space cooling, with space heating and domestic hot water provided by reject heat from the water-cooled array. All of the systems incorporate low temperature thermal storage (based on water as the storage medium) and lead--acid battery storage for electricity; in addition, the 600/sup 0/F ORC system uses a therminol-rock high temperature storage for the primary cycle. (WHK)

Not Available

1979-07-01T23:59:59.000Z

379

Measurements, Models, and Hypotheses in the Atmospheric Sciences  

Science Conference Proceedings (OSTI)

Measurements in atmospheric science sometimes determine universal functions, but more commonly data are collected in the form of case studies. Models are conceptual constructs that can be used to make predictions about the outcomes of ...

David A. Randall; Bruce A. Wielicki

1997-03-01T23:59:59.000Z

380

A Simple Model for the Pacific Cold Tongue and ENSO  

Science Conference Proceedings (OSTI)

A conceptual model is constructed based upon the Bjerknes hypothesis of tropical atmosphere–ocean interaction. It is shown that strong feedbacks among the trade winds, equatorial zonal sea surface temperature contrast, and upper-ocean heat ...

F-F. Jin

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Extended-Range Atmospheric Prediction and the Lorenz Model  

Science Conference Proceedings (OSTI)

The physical basis for extended-range prediction is explored using the famous three-component Lorenz convection model, taken as a conceptual representation of the chaotic extratropical circulation, and extended by coupling to a linear oscillator ...

T. N. Palmer

1993-01-01T23:59:59.000Z

382

Modeling  

NLE Websites -- All DOE Office Websites (Extended Search)

ALE-AMR ALE-AMR code Wangyi Liu, John Bernard, Alex Friedman, Nathan Masters, Aaron Fisher, Velemir Mlaker, Alice Koniges, David Eder June 4, 2011 Abstract In this paper we describe an implementation of a single-fluid inter- face model in the ALE-AMR code to simulate surface tension effects. The model does not require explicit information on the physical state of the two phases. The only change to the existing fluid equations is an additional term in the stress tensor. We show results of applying the model to an expanding Al droplet surrounded by an Al vapor, where additional droplets are created. 1 Introduction The Neutralized Drift Compression Experiment II (NDCX II) is an induction accelerator planned for initial commissioning in 2012. The final design calls for a 3 MeV, Li+ ion beam, delivered in a bunch with characteristic pulse duration of 1 ns, and transverse dimension of order 1 mm. The

383

Name Title Work Phone Work E-Mail  

NLE Websites -- All DOE Office Websites (Extended Search)

12012 EOTA - STAFF Name Title Work Phone Work E-Mail Melissa Otero Program Manager 505-842-7112 motero@eota.energy.gov Janet Lee Online Learning Support Specialist 505-842-7110...

384

Simulation-aided design and evaluation of flexible working times  

Science Conference Proceedings (OSTI)

The configuration of appropriate working time models can be a key factor in the success of both companies and employees. While such models can be used to adapt the available workforce to companies' specific requirements, there are also various disadvantages ...

Gert Zülch; Patricia Stock; Michael Leupold

2011-12-01T23:59:59.000Z

385

Work-Life Programs and Services  

Science Conference Proceedings (OSTI)

... NIST? Work Life Programs; Work Schedules. *. Bookmark and Share. Work-Life Programs and Services. Alternative ...

2011-09-22T23:59:59.000Z

386

Assigning multiple activities to work shifts  

Science Conference Proceedings (OSTI)

In some companies such as large retail stores, the employees perform different activities (e.g., cashier or clerk in a specific department) to respond to a customer demand for each activity that varies over the planning horizon and must be fulfilled ... Keywords: Activity assignment, Column generation, Multi-commodity network flow model, Rolling horizon, Work shifts

Quentin Lequy; Mathieu Bouchard; Guy Desaulniers; François Soumis; Beyime Tachefine

2012-04-01T23:59:59.000Z

387

Long-Baseline Neutrino Experiment (LBNE)Conceptual Design ReportThe LBNE Water Cherenkov DetectorApril 13 2012  

Science Conference Proceedings (OSTI)

Conceptual Design Report (CDR) developed for the Water Cherekov Detector (WCD) option for the far detector of the Long Baseline Neutrino Experiment (LBNE)

Kettell S. H.; Bishai, M.; Brown, R.; Chen, H.; Diwan, M.; Dolph, J., Geronimo, G.; Gill, R.; Hackenburg, R.; Hahn, R.; Hans, S.; Isvan, Z.; Jaffe, D.; Junnarkar, S.; Kettell, S.H.; Lanni,F.; Li, Y.; Ling, J.; Littenberg, L.; Makowiecki, D.; Marciano, W.; Morse, W.; Parsa, Z.; Radeka, V.; Rescia, S.; Samios, N.; Sharma, R.; Simos, N.; Sondericker, J.; Stewart, J.; Tanaka, H.; Themann, H.; Thorn, C.; Viren, B., White, S.; Worcester, E.; Yeh, M.; Yu, B.; Zhang, C.

2012-04-13T23:59:59.000Z

388

Maintenance Work Management Improvement: Improving Culture and Work Process  

Science Conference Proceedings (OSTI)

EPRI's Plant Maintenance Optimization (PMO) mission is to develop and demonstrate products and services for improved use of power plant maintenance resources and increased profitability. Based on a series of work management improvement projects, EPRI plans to develop a best practices guideline. As part of this effort, this document details how to improve fossil power plant work culture and work processes.

1998-06-16T23:59:59.000Z

389

Economics of a conceptual 75 MW Hot Dry Rock geothermal electric power station  

DOE Green Energy (OSTI)

Man-made, Hot Dry Rock (HDR) geothermal energy reservoirs have been investigated for over ten years. As early as 1977 a research-sized reservoir was created at a depth of 2.9 km near the Valles Caldera, a dormant volcanic complex in New Mexico, by connecting two wells with hydraulic fractures. Thermal power was generated at rates of up to 5 MW(t) and the reservoir was operated for nearly a year with a thermal drawdown less than 10/sup 0/C. A small 60kW(e) electrical generation unit using a binary cycle (hot geothermal water and a low boiling point organic fluid, R-114) was operated. Interest is now worldwide with field research being conducted at sites near Le Mayet de Montagne, France; Falkenberg and Urach, Federal Republic of Germany; Yakedake, Japan; and Rosemanowes quarry in Cornwall, United Kingdom. To assess the commercial viability of future HDR electrical generating stations, an economic modeling study was conducted for a conceptual 75 MW(e) generating station operating at conditions similar to those prevailing at the New Mexico HDR site. The reservoir required for 75 MW(e), equivalent to 550 MW of thermal energy, uses at least 9 wells drilled to 4.3 km and the temperature of the water produced should average 230/sup 0/C. Thermodynamic considerations indicate that a binary cycle should result in optimum electricity generation and the best organic fluids are refrigerants R-22, R-32, R-115 or R-600a (Isobutane). The break-even bus bar cost of HDR electricity was computed by the levelized life-cycle method, and found to be competitive with most alternative electric power stations in the US.

Murphy, H.D.; Drake, R.H.; Tester, J.W.; Zyvoloski, G.A.

1984-01-01T23:59:59.000Z

390

Conceptual plan: Two-Phase Flow Laboratory Program for the Waste Isolation Pilot Plant  

SciTech Connect

The Salado Two-Phase Flow Laboratory Program was established to address concerns regarding two-phase flow properties and to provide WIPP-specific, geologically consistent experimental data to develop more appropriate correlations for Salado rock to replace those currently used in Performance Assessment models. Researchers in Sandia`s Fluid Flow and Transport Department originally identified and emphasized the need for laboratory measurements of Salado threshold pressure and relative permeability. The program expanded to include the measurement of capillary pressure, rock compressibility, porosity, and intrinsic permeability and the assessment of core damage. Sensitivity analyses identified the anhydrite interbed layers as the most likely path for the dissipation of waste-generated gas from waste-storage rooms because of their relatively high permeability. Due to this the program will initially focus on the anhydrite interbed material. The program may expand to include similar rock and flow measurements on other WIPP materials including impure halite, pure halite, and backfill and seal materials. This conceptual plan presents the scope, objectives, and historical documentation of the development of the Salado Two-Phase Flow Program through January 1993. Potential laboratory techniques for assessing core damage and measuring porosity, rock compressibility, capillary and threshold pressure, permeability as a function of stress, and relative permeability are discussed. Details of actual test designs, test procedures, and data analysis are not included in this report, but will be included in the Salado Two-Phase Flow Laboratory Program Test Plan pending the results of experimental and other scoping activities in FY93.

Howarth, S.M.

1993-07-01T23:59:59.000Z

391

Exascale Hardware Architectures Working Group  

Science Conference Proceedings (OSTI)

The ASC Exascale Hardware Architecture working group is challenged to provide input on the following areas impacting the future use and usability of potential exascale computer systems: processor, memory, and interconnect architectures, as well as the power and resilience of these systems. Going forward, there are many challenging issues that will need to be addressed. First, power constraints in processor technologies will lead to steady increases in parallelism within a socket. Additionally, all cores may not be fully independent nor fully general purpose. Second, there is a clear trend toward less balanced machines, in terms of compute capability compared to memory and interconnect performance. In order to mitigate the memory issues, memory technologies will introduce 3D stacking, eventually moving on-socket and likely on-die, providing greatly increased bandwidth but unfortunately also likely providing smaller memory capacity per core. Off-socket memory, possibly in the form of non-volatile memory, will create a complex memory hierarchy. Third, communication energy will dominate the energy required to compute, such that interconnect power and bandwidth will have a significant impact. All of the above changes are driven by the need for greatly increased energy efficiency, as current technology will prove unsuitable for exascale, due to unsustainable power requirements of such a system. These changes will have the most significant impact on programming models and algorithms, but they will be felt across all layers of the machine. There is clear need to engage all ASC working groups in planning for how to deal with technological changes of this magnitude. The primary function of the Hardware Architecture Working Group is to facilitate codesign with hardware vendors to ensure future exascale platforms are capable of efficiently supporting the ASC applications, which in turn need to meet the mission needs of the NNSA Stockpile Stewardship Program. This issue is relatively immediate, as there is only a small window of opportunity to influence hardware design for 2018 machines. Given the short timeline a firm co-design methodology with vendors is of prime importance.

Hemmert, S; Ang, J; Chiang, P; Carnes, B; Doerfler, D; Leininger, M; Dosanjh, S; Fields, P; Koch, K; Laros, J; Noe, J; Quinn, T; Torrellas, J; Vetter, J; Wampler, C; White, A

2011-03-15T23:59:59.000Z

392

Southern thailand coal fired project: Conceptual design. Volume 3. Export trade information  

SciTech Connect

This study, conducted by Black & Veatch International, was funded by the U.S. Trade and Development Agency. The report addresses various technical, environmental, and economic aspects of developing four 1,000 MW units of coal fired electric generating facilities at a site near Prachuap Khiri Khan. The study includes a cost estimate for the units and the fuel delivery port as well as the major conceptual design decisions made for the project. The study is accompanied by four Conceptual Design manuals. The manual was prepared to communicate project design parameters and requirements to participants of the project, and to control uniformity of design concepts throughout the project. This is Volume 3 of the Conceptual Design manual which is divided into 12 sections pertaining to System Design Specifications.

1995-09-01T23:59:59.000Z

393

Southern thailand coal fired project: Conceptual design. Volume 2. Export trade information  

SciTech Connect

This study, conducted by Black & Veatch International, was funded by the U.S. Trade and Development Agency. The report addresses various technical, environmental, and economic aspects of developing four 1,000 MW units of coal fired electric generating facilities at a site near Prachuap Khiri Khan. The study includes a cost estimate for the units and the fuel delivery port as well as the major conceptual design decisions made for the project. The study is accompanied by four Conceptual Design manuals. The manual was prepared to communicate project design parameters and requirements to participants of the project, and to control uniformity of design concepts throughout the project. This is Volume 2 of the Conceptual Design and is divided into the following sections: (1) General Studies; (2) System Analyses.

1995-09-01T23:59:59.000Z

394

Southern thailand coal fired project: Conceptual design. Volume 4. Export trade information  

SciTech Connect

This study, conducted by Black & Veatch International, was funded by the U.S. Trade and Development Agency. The report addresses various technical, environmental, and economic aspects of developing four 1,000 MW units of coal fired electric generating facilities at a site near Prachuap Khiri Khan. The study includes a cost estimate for the units and the fuel delivery port as well as the major conceptual design decisions made for the project. The study is accompanied by four Conceptual Design manuals. The manual was prepared to commumnicate project design parameters and requirements to participants of the project, and to control uniformity of design concepts throughout the project. This is Volume 4 of the Conceptual Design manual and is divided into 12 sections pertaining to System Design Specifications.

1995-09-01T23:59:59.000Z

395

Working at EERE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working at EERE Working at EERE Working at EERE As a model employer and diversity/inclusion leader, we treat people as our greatest asset at the Office of Energy Efficiency and Renewable Energy (EERE). Our goal is to be an employer of choice and a diversity leader, and we measure our success by the engagement of our employees, the satisfaction of our customers and our relationships with the communities in which we work. In EERE, we constantly strive for a workplace that is inclusive and values each individual, as well as his or her experience, perspective and contribution to our success. The high value we place on diversity is critical to our mission because we must attract and retain the best talent, and create an engaged workforce to accomplish our worldwide national

396

ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report  

SciTech Connect

Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

Albrecht H. Mayer

2000-07-15T23:59:59.000Z

397

ADVANCED TURBINE SYSTEM CONCEPTUAL DESIGN AND PRODUCT DEVELOPMENT - Final Report  

SciTech Connect

Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricity costs to consumers and lowest emissions.

Albrecht H. Mayer

2000-07-15T23:59:59.000Z

398

Ventilation Model and Analysis Report  

Science Conference Proceedings (OSTI)

This model and analysis report develops, validates, and implements a conceptual model for heat transfer in and around a ventilated emplacement drift. This conceptual model includes thermal radiation between the waste package and the drift wall, convection from the waste package and drift wall surfaces into the flowing air, and conduction in the surrounding host rock. These heat transfer processes are coupled and vary both temporally and spatially, so numerical and analytical methods are used to implement the mathematical equations which describe the conceptual model. These numerical and analytical methods predict the transient response of the system, at the drift scale, in terms of spatially varying temperatures and ventilation efficiencies. The ventilation efficiency describes the effectiveness of the ventilation process in removing radionuclide decay heat from the drift environment. An alternative conceptual model is also developed which evaluates the influence of water and water vapor mass transport on the ventilation efficiency. These effects are described using analytical methods which bound the contribution of latent heat to the system, quantify the effects of varying degrees of host rock saturation (and hence host rock thermal conductivity) on the ventilation efficiency, and evaluate the effects of vapor and enhanced vapor diffusion on the host rock thermal conductivity.

V. Chipman

2003-07-18T23:59:59.000Z

399

Matter in Extreme Conditions Instrument - Conceptual Design Report  

Science Conference Proceedings (OSTI)

The SLAC National Accelerator Laboratory (SLAC), in collaboration with Argonne National Laboratory (ANL), Lawrence Livermore National Laboratory (LLNL), and the University of California at Los Angeles (UCLA), is constructing a Free-Electron Laser (FEL) research facility. The FEL has already met its performance goals in the wavelength range 1.5 nm - 0.15 nm. This facility, the Linac Coherent Light Source (LCLS), utilizes the SLAC 2-Mile Linear Accelerator (linac) and will produce sub-picosecond pulses of short wavelength X-rays with very high peak brightness and almost complete transverse coherence. The final one-third of the SLAC linac is used as the source of electrons for the LCLS. The high energy electrons are transported across the SLAC Research Yard, into a tunnel which houses a long undulator. In passing through the undulator, the electrons are bunched by the force of their own synchrotron radiation and produce an intense, monochromatic, spatially coherent beam of X-rays. By varying the electron energy, the FEL X-ray wavelength is tunable from 1.5 nm to 0.15 nm. The LCLS includes two experimental halls as well as X-ray optics and infrastructure necessary to create a facility that can be developed for research in a variety of disciplines such as atomic physics, materials science, plasma physics and biosciences. This Conceptual Design Report, the authors believe, confirms the feasibility of designing and constructing an X-ray instrument in order to exploit the unique scientific capability of LCLS by creating extreme conditions and study the behavior of plasma under those controlled conditions. This instrument will address the Office of Science, Fusion Energy Sciences, mission objective related to study of Plasma and Warm Dense Matter as described in the report titled LCLS, the First Experiments, prepared by the LCLS Scientific Advisory Committee (SAC) in September 2000. The technical objective of the LCLS Matter in Extreme Conditions (MEC) Instrument project is to design, build, and install at the LCLS an X-ray instrument that will complement the initial instrument suite included in the LCLS construction and the LUSI Major Item of Equipment (MIE) Instruments. As the science programs advance and new technological challenges appear, instrumentation must be developed and ready to conquer these new opportunities. The MEC concept has been developed in close consultation with the scientific community through a series of workshops team meetings and focused reviews. In particular, the MEC instrument has been identified as meeting one of the most urgent needs of the scientific community based on the advice of the LCLS Scientific Advisory Committee (SAC) in response to an open call for letters of intent (LOI) from the breadth of the scientific community. The primary purpose of the MEC instrument is to create High Energy Density (HED) matter and measure its physical properties. There are three primary elements of the MEC instrument: (A) Optical laser drivers that will create HED states by irradiation in several ways and provide diagnostics capability; (B) The LCLS x-ray free electron laser, which will provide the unique capability to create, probe and selectively pump HED states; and, (C) A suite of diagnostic devices required to observe the evolution of the HED state. These elements when combined in the MEC instrument meet the 'Mission Need' as defined in CD-0. For the purposes of the description we separate the types of experiments to be performed into three categories: (1) High pressure: Here we are interested in the generation of high pressure using the optical lasers to irradiate a surface that ablates and drives a pressure wave into a sample, similar to a piston. The pressures that can be reached exceed 1 Mbar and the properties of interest are for example, the reflectivity, conductivity, opacity as well as the changes driven by the pressure wave on, e.g., condensed matter structure. These phenomena will be studied by means of diffraction measurements, measurements of the pressure wave characteristics, in situ probing by

Boyce, R.F.; Boyce, R.M.; Haller, G.; Hastings, J.B.; Hays, G.; Lee, H.J.; /SLAC; Lee, R.W.; /LLNL, Livermore; Nagler, B.; /Rutherford; Scharfenstein, M.; Marsh, D.; White, W.E.; /SLAC

2009-12-09T23:59:59.000Z

400

Conceptual Ideas for New Nondestructive UF6 Cylinder Assay Techniques  

SciTech Connect

Nondestructive assay (NDA) measurements of uranium cylinders play an important role in helping the International Atomic Energy Agency (IAEA) safeguard uranium enrichment plants. Traditionally, these measurements have consisted of a scale or load cell to determine the mass of UF{sub 6} in the cylinder combined with a gamma-ray measurement of the 186 keV peak from {sup 235}U to determine enrichment. More recently, Los Alamos National Laboratory (LANL) and Pacific Northwest National Laboratory (PNNL) have developed systems that exploit the passive neutron signal from UF{sub 6} to determine uranium mass and/or enrichment. These include the Uranium Cylinder Assay System (UCAS), the Passive Neutron Enrichment Meter (PNEM), and the Hybrid Enrichment Verification Array (HEVA). The purpose of this report is to provide the IAEA with new ideas on technologies that may or may not be under active development but could be useful for UF{sub 6} cylinder assay. To begin, we have included two feasibility studies of active interrogation techniques. There is a long history of active interrogation in the field of nuclear safeguards, especially for uranium assay. Both of the active techniques provide a direct measure of {sup 235}U content. The first is an active neutron method based on the existing PNEM design that uses a correlated {sup 252}Cf interrogation source. This technique shows great promise for UF{sub 6} cylinder assay and is based on advanced technology that could be implemented in the field in the near term. The second active technique is nuclear resonance fluorescence (NRF). In the NRF technique, a bremsstrahlung photon beam could be used to illuminate the cylinder, and high-resolution gamma-ray detectors would detect the characteristic de-excitation photons. The results of the feasibility study show that under certain measurement geometries, NRF is impractical for UF6 cylinder assay, but the 'grazing transmission' and 'secant transmission' geometries have more potential for this application and should be assessed quantitatively. The next set of techniques leverage scintillator detectors that are sensitive to both neutron and gamma radiation. The first is the BC-523A capture-gated organic liquid scintillator. The detector response from several different neutron energies has been characterized and is included in the study. The BC-523A has not yet been tested with UF{sub 6} cylinders, but the application appears to be well suited for this technology. The second detector type is a relatively new inorganic scintillator called CLYC. CLYC provides a complementary detection approach to the HEVA and PNEM systems that could be used to determine uranium enrichment in UF{sub 6} cylinders. In this section, the conceptual idea for an integrated CLYC-HEVA/PNEM system is explored that could yield more precision and robustness against systemic uncertainties than any one of the systems by itself. This is followed by a feasibility study on using alpha-particle-induced reaction gamma-rays as a way to estimate {sup 234}U abundance in UF{sub 6}. Until now, there has been no readily available estimate of the strength of these reaction gamma-rays. Thick target yields of the chief reaction gammas are computed and show that they are too weak for practical safeguards applications. In special circumstances where long count times are permissible, the 1,275 keV F({alpha},x{gamma}) is observable. Its strength could help verify an operator declaration provided other knowledge is available (especially the age). The other F({alpha},x{gamma}) lines are concealed by the dominant uranium line spectrum and associated continuum. Finally, the last section provides several ideas for electromagnetic and acoustic nondestructive evaluation (NDE) techniques. These can be used to measure cylinder wall thickness, which is a source of systematic uncertainty for gamma-ray-based NDA techniques; characterize the UF{sub 6} filling profile inside the cylinder, which is a source of systematic uncertainty for neutron-based NDA techniques; locate hidden objects inside the cylinder; a

Miller, Karen A. [Los Alamos National Laboratory

2012-05-02T23:59:59.000Z

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Physical and Chemical Environmental Abstraction Model  

Science Conference Proceedings (OSTI)

As directed by a written development plan (CRWMS M&O 1999a), Task 1, an overall conceptualization of the physical and chemical environment (P/CE) in the emplacement drift is documented in this Analysis/Model Report (AMR). Included are the physical components of the engineered barrier system (EBS). The intended use of this descriptive conceptualization is to assist the Performance Assessment Department (PAD) in modeling the physical and chemical environment within a repository drift. It is also intended to assist PAD in providing a more integrated and complete in-drift geochemical model abstraction and to answer the key technical issues raised in the U.S. Nuclear Regulatory Commission (NRC) Issue Resolution Status Report (IRSR) for the Evolution of the Near-Field Environment (NFE) Revision 2 (NRC 1999). EBS-related features, events, and processes (FEPs) have been assembled and discussed in ''EBS FEPs/Degradation Modes Abstraction'' (CRWMS M&O 2000a). Reference AMRs listed in Section 6 address FEPs that have not been screened out. This conceptualization does not directly address those FEPs. Additional tasks described in the written development plan are recommended for future work in Section 7.3. To achieve the stated purpose, the scope of this document includes: (1) the role of in-drift physical and chemical environments in the Total System Performance Assessment (TSPA) (Section 6.1); (2) the configuration of engineered components (features) and critical locations in drifts (Sections 6.2.1 and 6.3, portions taken from EBS Radionuclide Transport Abstraction (CRWMS M&O 2000b)); (3) overview and critical locations of processes that can affect P/CE (Section 6.3); (4) couplings and relationships among features and processes in the drifts (Section 6.4); and (5) identities and uses of parameters transmitted to TSPA by some of the reference AMRs (Section 6.5). This AMR originally considered a design with backfill, and is now being updated (REV 00 ICN1) to address the design without backfill. This design change is described in ''Monitored Geologic Repository Project Description Document'' (CRWMS M&O 2000c). The design change will result in a greater ability of the waste packages to reject heat after closure of the repository, thereby maintaining the two thermal requirements. The first requirement is for protection of the fuel cladding, and the second requires that a section of the rock pillar between drifts remain below the boiling temperature of water, providing a path for water drainage.

E. Nowak

2000-11-09T23:59:59.000Z

402

Remedial investigation/feasibility study Work Plan and addenda for Operable Unit 4-12: Central Facilities Area Landfills II and III at the Idaho National Engineering Laboratory  

SciTech Connect

This document is divided into two main sections -- the Work Plan and the addenda. The Work Plan describes the regulatory history and physical setting of Operable Unit 4-12, previous sampling activities, and data. It also identifies a preliminary conceptual model, preliminary remedial action alternatives, and preliminary applicable or relevant and appropriate requirements. In addition, the Work Plan discusses data gaps and data quality objectives for proposed remedial investigation activities. Also included are tasks identified for the remedial investigation/feasibility study (RI/FS) and a schedule of RI/FS activities. The addenda include details of the proposed field activities (Field Sampling Plan), anticipated quality assurance activities (Quality Assurance Project Plan), policies and procedures to protect RI/FS workers and the environment during field investigations (Health and Safety Plan), and policies, procedures, and activities that the Department of Energy will use to involve the public in the decision-making process concerning CFA Landfills II and III RI/FS activities (Community Relations Plan).

Keck, K.N.; Stormberg, G.J.; Porro, I.; Sondrup, A.J.; McCormick, S.H.

1993-07-01T23:59:59.000Z

403

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

404

The Work for Others Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

were granted the authority to perform work for others by the Atomic Energy Act of 1954 Public Law 83-703; 42 USC 2053. Work For Others programs at the DOE national...

405

Conceptual design of a solar cogeneration facility at Pioneer Mill Co. , Ltd. Final report  

DOE Green Energy (OSTI)

A conceptual design study is made of the retrofit of a solar central receiver system to an existing cogeneration facility at a raw sugar factory in Hawaii. The existing facility is described and the studies for selecting the preferred system are presented. The conceptual design is described including requirements and load profile. Characteristics of the collector, receiver, thermal transport, master control, and nonsolar energy systems are described. An economic analysis was performed. Appendices include the system specification, site insolation, utility power purchase agreement, performance simulation results, interface data, and receiver flux maps. (LEW)

Not Available

1981-08-01T23:59:59.000Z

406

Conceptual design report, plutonium stabilization and handling,project W-460  

SciTech Connect

Project W-460, Plutonium Stabilization and Handling, encompasses procurement and installation of a Stabilization and Packaging System (SPS) to oxidize and package for long term storage remaining plutonium-bearing special nuclear materials currently in inventory at the Plutonium Finishing Plant (PFP), and modification of vault equipment to allow storage of resulting packages of stabilized SNM for up to fifty years. This Conceptual Design Report (CDR) provides conceptual design details for the vault modification, site preparation and site interface with the purchased SPS. Two concepts are described for vault configuration; acceleration of this phase of the project did not allow completion of analysis which would clearly identify a preferred approach.

Weiss, E.V.

1997-03-06T23:59:59.000Z

407

Conceptual Design for a High-Temperature Gas Loop Test Facility  

SciTech Connect

This report documents an early-stage conceptual design for a high-temperature gas test loop. The objectives accomplished by the study include, (1) investigation of existing gas test loops to determine ther capabilities and how the proposed system might best complement them, (2) development of a preliminary test plan to help identify the performance characteristics required of the test unit, (3) development of test loop requirements, (4) development of a conceptual design including process flow sheet, mechanical layout, and equipment specifications and costs, and (5) development of a preliminary test loop safety plan.

James B. Kesseli

2006-08-01T23:59:59.000Z

408

Demonstration Development Project: Solar-Fossil Hybrid Power Plants: Summary Report on Conceptual Designs  

Science Conference Proceedings (OSTI)

This document provides a high-level summary of selected EPRI research into solar-fossil hybrid power systems. It summarizes key technology results from a series of conceptual design studies that evaluated the performance of a range of solar-fossil hybrid options for existing natural gas combined cycle (NGCC) and coal-fired plants. All of the conceptual designs considered the use of solar-derived steam in conventional fossil-fired steam cycles, an approach that offsets some of the fuel required to generat...

2010-12-17T23:59:59.000Z

409

Live Work Guide for Substations  

Science Conference Proceedings (OSTI)

Live work (work on energized circuits) is the preferred method of maintenance where system integrity, system reliability, and operating revenues are at a premium and removal of a circuit or a substation from service is not acceptable. Live work (LW) may also be beneficial in construction and storm damage repair. Furthermore, live work may be unavoidable in the case of substations that serve essential facilities such as hospitals, law enforcement, fire departments, and intrusion alarms if standby local ge...

2004-10-28T23:59:59.000Z

410

Conceptual design assessment for the co-firing of bio-refinery supplied lignin project. Quarterly report, June 23--July 1, 2000  

DOE Green Energy (OSTI)

The Conceptual Design Assessment for the Co-Firing of Bio-Refinery Supplied Lignin Project was successfully kicked off on July 23, 2000 during a meeting at the TVA-PPI facility in Muscle Shoals, AL. An initial timeline for the study was distributed, issues of concern were identified and a priority actions list was developed. Next steps include meeting with NETL to discuss de-watering and lignin fuel testing, the development of the mass balance model and ethanol facility design criteria, providing TVA-Colbert with preliminary lignin fuel analysis and the procurement of representative feed materials for the pilot and bench scale testing of the hydrolysis process.

Berglund, T.; Ranney, J.T.; Babb, C.L.

2000-07-27T23:59:59.000Z

411

Smart Grid Interoperability Maturity Model  

Science Conference Proceedings (OSTI)

The integration of automation associated with electricity resources (including transmission and distribution automation and demand-side resources operated by end-users) is key to supporting greater efficiencies and incorporating variable renewable resources and electric vehicles into the power system. The integration problems faced by this community are analogous to those faced in the health industry, emergency services, and other complex communities with many stakeholders. To highlight this issue and encourage communication and the development of a smart grid interoperability community, the GridWise Architecture Council (GWAC) created an Interoperability Context-Setting Framework. This "conceptual model" has been helpful to explain the importance of organizational alignment in addition to technical and informational interface specifications for "smart grid" devices and systems. As a next step to building a community sensitive to interoperability, the GWAC is investigating an interoperability maturity model (IMM) based on work done by others to address similar circumstances. The objective is to create a tool or set of tools that encourages a culture of interoperability in this emerging community. The tools would measure status and progress, analyze gaps, and prioritize efforts to improve the situation.

Widergren, Steven E.; Levinson, Alex; Mater, J.; Drummond, R.

2010-04-28T23:59:59.000Z

412

Relationships among Non-Academic Employee Perceptions of Manager Leadership Behaviors, Meaningful Work, and Selected Performance Drivers  

E-Print Network (OSTI)

U.S. public institutions of higher education are unique work environments that employ millions of faculty, staff, and administrators. Reported research on human resource issues for non-academic employees within higher education, however, is scarce. Given that staff who work in higher education are increasingly being asked to perform at higher levels with equal or fewer resources, research is needed as to how these outcomes can be achieved. The purpose of this study was to determine to what extent non-academic middle manager participative and supportive leadership behaviors are related to employee perceptions of meaningful work (conceptualized as growth satisfaction, empowerment, person-job fit, and affiliation commitment) and to employee learning goal orientation, organizational citizenship behavior, and intention to turnover. A population of 4,235 employees within a large public institution of higher education in the southwestern part of the United States was asked to participate in an online survey. The survey was comprised of items from eight validated instruments with 45 items and additional demographic information. Respondents totaled 1,333 (31.5%). Data were analyzed using descriptive statistics, Cronbach’s alpha coefficient for reliability, exploratory factor analysis, and structural equation modeling techniques. Results of the study led to revisions of the initially proposed constructs via exploratory factor analysis, giving rise to seven constructs: Cooperative Leader Behavior, Work Fulfillment and Identity, Work Influence and Affiliation, Learning Goal Orientation, Personal Industry, Interpersonal Helping, and Intention to Turnover. Evaluation of the structural model for the revised constructs, with one added path, resulted in good fit (chi^2=3246.397 [796]=4.078, p=.000; CFI=.941; TLI=.936; RMSEA .048; SRMR=.051). Cooperative Leader Behavior was significantly and positively related to employee perceptions of Work Fulfillment and Identity (beta=.517, p<.05) and Work Influence and Affiliation (beta=.643, p<.05). Cooperative Leader Behavior, Work Fulfillment and Identity, and Work Influence and Affiliation were significantly and negatively related to Intention to Turnover (beta=-.436, p<.05; beta=-.480, p<.05; beta=-.293, p<.05, respectively). Work Fulfillment and Identity was significantly and positively related to Learning Goal Orientation (beta=.261, p<.05) and Personal Industry (beta=.309, p<.05). Work Influence and Affiliation was significantly and positively related to Interpersonal Helping (beta=.274, p<.05). Finally, Work Fulfillment and Identity and Work Influence and Affiliation had a significant bi-directional relationship (beta=.848, p<.05). Conclusions drawn from the results of this study led to, 1) recommendations and implications for the training and development of middle managers, 2) recommendations and implications for theory and research, and 3) recommendations and implications for practice. Higher education institutions that desire to foster employee perceptions of meaningful work and influence performance drivers such as intention to turnover should focus on developing middle-manager cooperative leadership behaviors. Additional research is needed to continue to revise, refine and validate the new constructs identified in this study, as well as to identify additional performance drivers in higher education responsive to cooperative leader behavior.

Hammons, Laura

2013-08-01T23:59:59.000Z

413

Baseline risk assessment for groundwater operable units at the Chemical Plant Area and the Ordnance Works Area, Weldon Spring, Missouri  

Science Conference Proceedings (OSTI)

The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are evaluating conditions in groundwater and springs at the DOE chemical plant area and the DA ordnance works area near Weldon Spring, Missouri. The two areas are located in St. Charles County, about 48 km (30 mi) west of St. Louis. The 88-ha (217-acre) chemical plant area is chemically and radioactively contaminated as a result of uranium-processing activities conducted by the U.S. Atomic Energy Commission in the 1950s and 1960s and explosives-production activities conducted by the U.S. Army (Army) in the 1940s. The 6,974-ha (17,232-acre) ordnance works area is primarily chemically contaminated as a result of trinitrotoluene (TNT) and dinitrotoluene (DNT) manufacturing activities during World War II. This baseline risk assessment (BRA) is being conducted as part of the remedial investigation/feasibility study (RUFS) required under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980, as amended. The purpose of the BRA is to evaluate potential human health and ecological impacts from contamination associated with the groundwater operable units (GWOUs) of the chemical plant area and ordnance works area. An RI/FS work plan issued jointly in 1995 by the DOE and DA (DOE 1995) analyzed existing conditions at the GWOUs. The work plan included a conceptual hydrogeological model based on data available when the report was prepared; this model indicated that the aquifer of concern is common to both areas. Hence, to optimize further data collection and interpretation efforts, the DOE and DA have decided to conduct a joint RI/BRA. Characterization data obtained from the chemical plant area wells indicate that uranium is present at levels slightly higher than background, with a few concentrations exceeding the proposed U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 20 {micro}g/L (EPA 1996c). Concentrations of other radionuclides (e.g., radium and thorium) were measured at back-ground levels and were eliminated from further consideration. Chemical contaminants identified in wells at the chemical plant area and ordnance works area include nitroaromatic compounds, metals, and inorganic anions. Trichloroethylene (TCE) and 1,2-dichloroethylene (1,2 -DCE) have been detected recently in a few wells near the raffinate pits at the chemical plant.

NONE

1999-07-14T23:59:59.000Z

414

Fundamental analysis and conceptual model for corporate strategy in global engineering and construction markets  

E-Print Network (OSTI)

Strategic management as an academic field of study has spanned over four decades. As an interdisciplinary subject that enjoys concurrent contributions by allied disciplines such as economics and social science, numerous ...

Cheah, Yuen Jen, 1972-

2002-01-01T23:59:59.000Z

415

A conceptual model of the cognitive processing of environmental distance information  

Science Conference Proceedings (OSTI)

I review theories and research on the cognitive processing of environmental distance information by humans, particularly that acquired via direct experience in the environment. The cognitive processes I consider for acquiring and thinking about environmental ... Keywords: cognitive processing, distance information, spatial cognition

Daniel R. Montello

2009-09-01T23:59:59.000Z

416

Borehole Completion and Conceptual Hydrogeologic Model for the IFRC Well Field, 300 Area, Hanford Site  

SciTech Connect

A tight cluster of 35 new wells was installed over a former waste site, the South Process Pond (316-1 waste site), in the Hanford Site 300 Area in summer 2008. This report documents the details of the drilling, sampling, and well construction for the new array and presents a summary of the site hydrogeology based on the results of drilling and preliminary geophysical logging.

Bjornstad, Bruce N.; Horner, Jacob A.; Vermeul, Vincent R.; Lanigan, David C.; Thorne, Paul D.

2009-04-20T23:59:59.000Z

417

Author's personal copy Long-term water balance and conceptual model of a semi-arid  

E-Print Network (OSTI)

\\lrs. Virginia JohnsLOn, Dean Stimsou, i\\lrs. Kay Bell, ;\\lorton !Iiller. Jay Jeppson , Pmres~or Berman. Row two

Link, Timothy E.

418

Development of a conceptual model for ash dump system using hydraulic and tracer test techniques.  

E-Print Network (OSTI)

?? Coal provides for 77% of South Africa&rsquo s primary energy needs and is therefore a major resource that supports the socio-economic needs of South… (more)

October, Adolf Gerswin

2011-01-01T23:59:59.000Z

419

Nocturnal Cold-Air Intrusions into a Closed Basin: Observational Evidence and Conceptual Model  

Science Conference Proceedings (OSTI)

Observations are analyzed to explain an unusual feature of the nighttime atmospheric structure inside Arizona’s idealized, basin-shaped Meteor Crater. The upper 75%–80% of the crater’s atmosphere, which overlies an intense surface-based inversion ...

C. David Whiteman; Sebastian W. Hoch; Manuela Lehner; Thomas Haiden

2010-09-01T23:59:59.000Z

420

Using Conceptual Graphs in a Multifaceted Logical Model for Information Retrieval  

E-Print Network (OSTI)

Ounis,I. Chevallet,J. Proceedings of the 7th Database and Expert System Applications Conference, DEXA'96 Zurich, Switzerland, Lecture Notes in Computer Science pp 812-823 Springer

Ounis, I.

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

An Early-Season Coastal Storm: Conceptual Success and Model Failure  

Science Conference Proceedings (OSTI)

An unusual early-season snowstorm dumped more than 50 cm of snow over portions of interior eastern New York and western New England on 4 October 1987. This was associated with poorly forecasted cyclogenesis. In the wake of atmospheric cooling ...

Lance F. Bosart; Frederick Sanders

1991-12-01T23:59:59.000Z

422

A conceptual framework to energy estimation in buildings using agent based modeling  

Science Conference Proceedings (OSTI)

Actual energy consumption in buildings is typically different from predictions during the design phase. While differences in occupant energy usage characteristics play an important role in this variation, actual energy estimation software do not account ...

Elie Azar; Carol Menassa

2010-12-01T23:59:59.000Z

423

False Alarms and Close Calls: A Conceptual Model of Warning Accuracy  

Science Conference Proceedings (OSTI)

The false alarm rate (FAR) measures the fraction of forecasted events that did not occur, and it remains one of the key metrics for verifying National Weather Service (NWS) weather warnings. The national FAR for tornado warnings in 2003 was 0.76, ...

Lindsey R. Barnes; Eve C. Gruntfest; Mary H. Hayden; David M. Schultz; Charles Benight

2007-10-01T23:59:59.000Z

424

A conceptual model and IS framework for the design and adoption of environmental compliance management systems  

Science Conference Proceedings (OSTI)

Environmental concerns have led to a significant increase in the number and scope of compliance imperatives governing electrical, electronics, and IT products across global regulatory environments. This is, of course, in addition to general compliance ... Keywords: Enterprise systems, Environment, Environmental compliance management systems, Governance, IS framework, IT, Risk and compliance

Tom Butler; Damien Mcgovern

2012-04-01T23:59:59.000Z

425

The Newcastle geothermal system, Iron County, Utah: Geology, hydrology, and conceptual model  

DOE Green Energy (OSTI)

This appendix contains raw data used in the fault slip analysis. Data was collected from four sites, sites A through D. Minor fault slip measurements are listed for each site, and each row of data is one measurement. The index number is an arbitrary sequential number. Strike is the strike of the fault plane, measured in the northern hemisphere. Dip is the dip of the fault plane, which has two letters attached to the end showing the quadrant of the dip direction. Rake is the rake of the slickenside in the plane of the fault, which has two letters attached to the end showing the quadrant of the plunge direction of the rake. Sense is the sense of slip of the fault: N = normal (rake > 45{degree}), R = reverse (rake > 45{degree}), D = dextral (rake < 45{degree}), S = sinistral (rake < 45{degree}). 37 figs., 19 tabs.

Blackett, R.E.; Shubat, M.A.; Bishop, C.E. (Utah Geological and Mineral Survey, Salt Lake City, UT (USA)); Chapman, D.S.; Forster, C.B.; Schlinger, C.M. (Utah Univ., Salt Lake City, UT (USA). Dept. of Geology and Geophysics)

1990-03-01T23:59:59.000Z

426

Classification and Conceptual Models for Heavy Snowfall Events over East Vancouver Island of British Columbia, Canada  

Science Conference Proceedings (OSTI)

The East Vancouver Island region on the west coast of Canada is prone to heavy snow in winter due to its unique geographical setting, which involves complicated interactions among atmosphere, ocean, and local topography. The challenge for ...

Mingling R. Wu; Bradley J. Snyder; Ruping Mo; Paul I. Joe; Alex J. Cannon

427

July 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - anticipated completion no later than September, assuming timely OMB review and approval. 2. Draft PF Working Group charter final review by senior management to be

428

Characteristics of the Receptor for the Biosphere Model  

Science Conference Proceedings (OSTI)

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 156605], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 156605]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with AP-SIII.9Q, ''Scientific Analyses'', and the technical work plan (BSC 2004 [DIRS 169573]).

M. Wasiolek; K. Rautenstrauch

2004-09-09T23:59:59.000Z

429

RETURN TO THE RIVER -2000 Chapter 3 An Alternative Conceptual Foundation50  

E-Print Network (OSTI)

-cobble bedded mainstem segments (e.g., alluvial reaches such as the Hanford Reach in central Washington is a central tenet of our conceptual foundation. We believe that the floodplain reaches and gravel the Hanford Reach of the Columbia River are characterized by nutrient rich floodplain soils and diverse

430

PageCluster: Mining Conceptual Link Hierarchies from Web Log Files for  

E-Print Network (OSTI)

accurately than the bibliographic analysis method. Our user study also shows that the conceptual link link hierarchies, link similarity, clustering, Web site navigation, bibliographic analysis 1 and that copies show this notice on the first page or initial screen of a display along with the full citation

Zhu, Jianhan

431

Conceptual Development of Quantum Mechanics: Experiences with the Visual Quantum Mechanics Materials*  

E-Print Network (OSTI)

Conceptual Development of Quantum Mechanics: Experiences with the Visual Quantum Mechanics using a portion of the materials developed by the Visual Quantum Mechanics (VQM) project1 as part of our recent efforts to investigate student understanding of basic quantum mechanics concepts. The VQM

Larkin, Teresa L.

432

Enactment of inter-subjectivity in phenomenological bodily interaction: a conceptual framework  

Science Conference Proceedings (OSTI)

How can design teams constitute human bodily attributions as the locus of productive forces, the site in which an interaction language links up with phenomenological practices of human users? I propose that the salient characteristic of this matter is ... Keywords: bodily interaction, conceptual framework, digital artifact, methodology, phenomenology

Hyewon Kim

2011-06-01T23:59:59.000Z

433

On the assessment of the strategic value of information technologies: conceptual and analytical approaches  

Science Conference Proceedings (OSTI)

This study compares two conceptual (resource-centered and contingency-based) and two analytical (linear and nonlinear) approaches that can be used to assess the strategic value of information technology. Two hypotheses related to these approaches are ... Keywords: business value of IT, contingency approach, nonlinear approaches, organizational performance, resource-centered view, strategic alignment of IT, strategic value of IT

Wonseok Oh; Alain Pinsonneault

2007-06-01T23:59:59.000Z

434

GOClonto: An ontological clustering approach for conceptualizing PubMed abstracts  

Science Conference Proceedings (OSTI)

Concurrent with progress in biomedical sciences, an overwhelming of textual knowledge is accumulating in the biomedical literature. PubMed is the most comprehensive database collecting and managing biomedical literature. To help researchers easily understand ... Keywords: Conceptualization, Fuzzy Ants clustering, GOClonto, Gene ontology, Lingo, Ontological clustering, Ontology generation, PubMed abstract, Suffix tree clustering, Tolerance rough set

Hai-Tao Zheng; Charles Borchert; Hong-Gee Kim

2010-02-01T23:59:59.000Z

435

Conceptual design report for the mechanical disassembly of Fort St. Vrain fuel elements  

Science Conference Proceedings (OSTI)

A conceptual design study was prepared that: (1) reviewed the operations necessary to perform the mechanical disassembly of Fort St. Vrain fuel elements; (2) contained a description and survey of equipment capable of performing the necessary functions; and (3) performed a tradeoff study for determining the preferred concepts and equipment specifications. A preferred system was recommended and engineering specifications for this system were developed.

Lord, D.L. [Westinghouse Idaho Nuclear Co., Inc., Idaho Falls, ID (United States); Wadsworth, D.C.; Sekot, J.P.; Skinner, K.L. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

1993-04-01T23:59:59.000Z

436

Development of a framework for truss-braced wing conceptual MDO  

Science Conference Proceedings (OSTI)

The paper describes the development of a multidisciplinary design optimization framework for conceptual design of truss-braced wing configurations. This unconventional configuration requires specialized analysis tools supported by a modular and flexible ... Keywords: Design environment, Framework, MDO, Truss-Braced Wing

Ohad Gur; Manav Bhatia; William H. Mason; Joseph A. Schetz; Rakesh K. Kapania; Taewoo Nam

2011-08-01T23:59:59.000Z

437

Conceptual design report for immobilized high-level waste interim storage facility (Phase 1)  

SciTech Connect

The Hanford Site Canister Storage Building (CSB Bldg. 212H) will be utilized to interim store Phase 1 HLW products. Project W-464, Immobilized High-Level Waste Interim Storage, will procure an onsite transportation system and retrofit the CSB to accommodate the Phase 1 HLW products. The Conceptual Design Report establishes the Project W-464 technical and cost basis.

Burgard, K.C.

1998-04-09T23:59:59.000Z

438

Conceptual design report for immobilized high-level waste interim storage facility (Phase 1)  

SciTech Connect

The Hanford Site Canister Storage Building (CSB Bldg. 212H) will be utilized to interim store Phase 1 HLW products. Project W-464, Immobilized High-Level Waste Interim Storage, will procure an onsite transportation system and retrofit the CSB to accommodate the Phase 1 HLW products. The Conceptual Design Report establishes the Project W-464 technical and cost basis.

Burgard, K.C.

1998-06-02T23:59:59.000Z

439

Southwestern Public Service Company Solar Repowering Program. Volume 1. Conceptual design and evaluation. Final technical report  

DOE Green Energy (OSTI)

The detailed conceptual design, subsystem characteristics, economic analysis, development plan, and user's assessment of repowering Southwest Public Service Company's Plant X located south of Amarillo, Texas, with a tower focus power plant are presented. The plant will utilize liquid sodium heat transfer fluids, thermal storage tanks, and a steam generator/turbine. Detailed economic and cost data are included. (WHK)

Not Available

1980-07-01T23:59:59.000Z

440

Conceptual study on Flexible Guidance and Docking system for ITER Remote Handling  

E-Print Network (OSTI)

1 Conceptual study on Flexible Guidance and Docking system for ITER Remote Handling Transport Cask divertors and blanket modules from the Tokamak Building to the Hot Cell Building o Addressed topics for ITER Remote Handling Transport Cask o Publications from IST team: · Isabel Ribeiro, Pedro Lima, Pedro

Ribeiro,Isabel

Note: This page contains sample records for the topic "working conceptual model" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Nuclear Maintenance Applications Center: Maintenance Work Package Planning Guidance  

Science Conference Proceedings (OSTI)

The work management process is one of the core business processes outlined within the Nuclear Energy Institute (NEI) Standard Nuclear Performance Model for operation and maintenance of nuclear power plants. The preparation of work packages is a key element of this overall process. The purpose of this report is to provide guidance to power plant personnel regarding work package quality as a supplement to Institute of Nuclear Power Operations (INPO) AP-928, Work Management Process Description. The ...

2013-09-10T23:59:59.000Z

442

A non-local, ordinary-state-based viscoelasticity model for peridynamics.  

SciTech Connect

A non-local, ordinary-state-based, peridynamics viscoelasticity model is developed. In this model, viscous effects are added to deviatoric deformations and the bulk response remains elastic. The model uses internal state variables and is conceptually similar to linearized isotropic viscolelasticity in the local theory. The modulus state, which is used to form the Jacobian matrix in Newton-Raphson algorithms, is presented. The model is shown to satisfy the 2nd law of thermodynamics and is applicable to problems in solid continuum mechanics where fracture and rate effects are important; it inherits all the advantages for modeling fracture associated with peridynamics. By combining this work with the previously published ordinary-state-based plasticity model, the model may be amenable to viscoplasticity problems where plasticity and rate effects are simultaneously important. Also, the model may be extended to include viscous effects for spherical deformations as well. The later two extensions are not presented and may be the subject of further work.

Mitchell, John Anthony

2011-10-01T23:59:59.000Z

443

FACT SHEET: BIOENERGY WORKING GROUP  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 1 FACT SHEET: BIOENERGY WORKING GROUP At the Clean Energy Ministerial in Washington, D.C. on July 19 th and 20 th , ministers launched a Bioenergy Working Group, which will advance the deployment of bioenergy technologies by implementing recommendations of the Technology Action Plan on Bioenergy Technologies that was released by the Major Economies Forum Global Partnership in December 2009. The Working Group will work in close cooperation with the Global Bioenergy Partnership (GBEP), which is co-chaired by Brazil and Italy. Initial key activities of the Working Group include: 1. Global Bioenergy Atlas: The Working Group will combine and build upon existing databases of sustainably-developed bioenergy potential around the globe and make it available in an open web-

444

Robotic Technologies for Live Working  

Science Conference Proceedings (OSTI)

The objective of this report is to review selected available robotic technologies and evaluate their possible applicability to live working. The selection criteria for robotic technologies included suitability for operation in a high-voltage environment; mechanical load capacity; and extent of reach, size, and weight compatible with live work applications. The report provides a brief history of robotics in live work dating back to late 1970s and the development of the EPRI TOMCAT (Teleoperator for Operat...

2010-12-23T23:59:59.000Z

445

September 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 [Protective Force Personnel Medical, Physical Readiness, Training, and Access Authorization Standards] as a final rule that includes modification efforts to address barriers to workforce retention. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - publication anticipated this month.

446

Construction Work in Progress (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

447

Work Family Community, Human Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Work-Life Balance Programs Adoption Assistance Program Benefits Blood Drives Brookhaven Employee's Recreation Association (BERA) Brookhaven Retired Employee Association (BREA)...

448

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

449

NREL: Energy Storage - Working with Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us Working with Us Partnering with industry, government, and universities is key to developing affordable energy storage technology and moving it into the marketplace and the U.S. economy. In collaboration with our diverse partners, we use thermal management and modeling and analysis from a vehicle systems perspective to improve energy storage devices. Much of our research is conducted at the state-of-the-art energy storage laboratory, in Golden, Colorado. There are a variety of ways to become involved with NREL's Energy Storage activities: NREL's Partnering Agreements Work collaboratively with NREL through a variety of Technology Partnership Agreements. We can help you select the most appropriate agreement for your research project. Gain access to NREL's expertise and specialized research facilities through

450

Addendum to the East Tennessee Technology Park Site-Wide Residual Contamination Remedial Investigation Work Plan Oak Ridge, Tennessee  

SciTech Connect

The East Tennessee Technology Park Site-Wide Residual Contamination Remedial Investigation Work Plan (DOE 2004) describes the planned fieldwork to support the remedial investigation (RI) for residual contamination at the East Tennessee Technology Park (ETTP) not addressed in previous Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) decisions. This Addendum describes activities that will be conducted to gather additional information in Zone 1 of the ETTP for groundwater, surface water, and sediments. This Addendum has been developed from agreements reached in meetings held on June 23, 2010, August 25, 2010, October 13, 2010, November 13, 2010, December 1, 2010, and January 13, 2011, with representatives of the U. S. Department of Energy (DOE), U. S. Environmental Protection Agency (EPA), and Tennessee Department of Environment and Conservation (TDEC). Based on historical to recent groundwater data for ETTP and the previously completed Sitewide Remedial Investigation for the ETTP (DOE 2007a), the following six areas of concern have been identified that exhibit groundwater contamination downgradient of these areas above state of Tennessee and EPA drinking water maximum contaminant levels (MCLs): (1) K-720 Fly Ash Pile, (2) K-770 Scrap Yard, (3) Duct Island, (4) K-1085 Firehouse Burn/J.A. Jones Maintenance Area, (5) Contractor's Spoil Area (CSA), and (6) Former K-1070-A Burial Ground. The paper presents a brief summary of the history of the areas, the general conceptual models for the observed groundwater contamination, and the data gaps identified.

SAIC

2011-04-01T23:59:59.000Z

451

Supplement to the site observational work plan for the UMTRA project site at Ambrosia Lake, New Mexico  

SciTech Connect

The purpose of this document is to provide additional and more detailed information to supplement review of the site observational work plan (SOWP) (DOE, 1995) for the Ambrosia Lake, New Mexico, Uranium Mill Tailings Remedial Action (UMTRA) Project site. This document includes a discussion of the average linear velocity of the ground water in the alluvium and a discussion of the ground water quality of the alluvium, weathered Mancos Shale, and the Tres Hermanos-C Member of the Mancos Shale. The data from a 1989 aquifer test were analyzed using the curve-matching software AQTESOLV and then compared with the original results. A hydrograph of the ground water elevations in monitoring wells screened in the alluvium is presented to show how the ground water elevations change with time. Stiff and Piper diagrams were created to describe the changes in ground water geochemistry in the alluvium/weathered Mancos Sahel unit, the Tres Hermanos-C Sandstone unit, the Tres Hermanos-B Sandstone unit, and the Dakota Sandstone. Background information on other related topics such as site history, cell construction, soil characteristics, and well construction are presented in the SOWP. A geologic cross section depicts the conceptual model of the hydrostratigraphy and ground water chemistry of the Ambrosia Lake site. Hydrogeologic information of each hydrostratigraphic unit is presented.

NONE

1995-11-01T23:59:59.000Z

452

Supplement to the site observational work plan for the UMTRA Project Site at Ambrosia Lake, New Mexico  

SciTech Connect

The purpose of this document is to provide additional and more detailed information to supplement review of the site observational work plan (SOWP) for the Ambrosia Lake, New Mexico, Uranium Mill Tailings Remedial Action (UMTRA) Project site. This document includes a discussion of (1) the average linear velocity of the ground water in the alluvium; (2) the ground water quality of the alluvium, weathered Mancos Shale, and the Tres Hermanos-C Member of the Mancos Shale; and (3) the fate and transport of contaminants from the uppermost aquifer to the Westwater Canyon Member of the Morrison Formation. The data from a 1989 aquifer test were analyzed using the curve-matching software AQTESOLV and then compared with the original results. A hydrograph of the ground water elevations in monitoring wells screened in the alluvium is presented to show how the ground water elevations change with time. Stiff and Piper diagrams were created to describe the changes in ground water geochemistry in the alluvium/weathered Mancos Shale unit, the Tres Hermanos-C Sandstone unit, the Tres Hermanos-B Sandstone unit, and the Dakota Sandstone. Background information on other related topics such as site history, cell construction, soil characteristics, and well construction are presented in the SOWP. Figure 1 is a geologic cross section depicting the conceptual model of the hydrostratigraphy and ground water chemistry of the Ambrosia Lake site. Table 1 presents hydrogeologic information of each hydrostratigraphic unit.

NONE

1996-02-01T23:59:59.000Z

453

Utility Solar Business Models  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) and the Solar Electric Power Association (SEPA) are conducting an ongoing joint research effort, initiated in 2011, to define, track, and evaluate the expanding range of regulated utility solar energy acquisition activities. This report provides a high-level overview of the conceptual framework by which EPRI-SEPA are classifying regulated utility solar business models (USBMs) in the United States. It then provides five case studies detailing existing ...

2012-12-31T23:59:59.000Z

454

Transuranic Waste Transportation Working Group Agenda | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda More Documents & Publications...

455

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL  

Office of Legacy Management (LM)

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH FEBRUARY 1999 Final (Revision 0) Department of Energy Babcock & Wilcox of Ohio Mr. Daniel Bird AICP, Planning Manager Miamisburg Mound Community Improvement Corporation 720 Mound Road Miamisburg, Ohio 45342-6714 Dear Mr. Bird: The Core Team, consisting of the U.S. Department of Energy Miamisburg Environmental Management Project (DOE-MEMP), U.S. Environmental Protection Agency (USEPA), and the Ohio Environmental Protection Agency (OEPA), appreciates your comments on the Work

456

The future of crowd work  

Science Conference Proceedings (OSTI)

Paid crowd work offers remarkable opportunities for improving productivity, social mobility, and the global econo