Powered by Deep Web Technologies
Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Photoswitchable method for the ordered attachment of proteins to surfaces  

DOE Patents (OSTI)

Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

Camarero, Julio A. (Livermore, CA); DeYoreo, James J. (Clayton, CA); Kwon, Youngeun (Livermore, CA)

2011-07-05T23:59:59.000Z

2

ARM - Engineering Work Request & Engineering Work Order Guidelines  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Request & Engineering Work Request & Engineering Work Order Guidelines Page Contents: Introduction Discussion of the ARM Climate Research Facility Engineering Process: The Engineering Change Request (ECR) and the Engineering Change Order (ECO) Operations and Engineering Task Consulting: The Engineering Work Request (EWR) and the Engineering Work Order (EWO) Relationship of the ECR/ECO and EWR/EWO to the Engineering Task Tracking Tool Relationship of the ECR/ECO and EWR/EWO to the Existing Configuration Control Process in the ARM Climate Research Facility(PIF/CAR, PRR, ORR, and BCR) Glossary Frequently Asked Questions (PDF, 173K) Engineering Work Request & Engineering Work Order Guidelines Process Guidelines for the Engineering Change Request/Engineering Change Order and Engineering Work Request/Engineering Work Order

3

FEDERAL OCCUPATIONAL HEALTH Attachment E: Physician Treatment Orders - FOH-24 Form (formerly 229-B)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FOH-24 (formerly 229-B) rev. 7/01 FOH-24 (formerly 229-B) rev. 7/01 FEDERAL OCCUPATIONAL HEALTH Attachment E: Physician Treatment Orders - FOH-24 Form (formerly 229-B) ALL INFORMATION WILL BE CONSIDERED CONFIDENTIAL Dear Doctor: If you are using this form for allergen immunotherapy, you must provide the information requested in blocks #1, 2, 3, 4, 5, 6, 7, 10, 11, and 12. TO: FOH Occupational Health Center Patient Name:_________________________________________ Diagnosis:______________________________________ Physician's Orders (may attach additional page): 1) Exact Name of Medication 2) Dosage 3) Interval of Administration 4) Method of Administration: ____ SQ ____ IM 5) Expiration Date of Order: (if less than 6 months) 6) First dose of each new multi-dose vial or box of single dose

4

FEMP SERVICES INTERAGENCY AGREEMENT WORK ORDER FOR SKAGGS AMENDMENT...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORDER FOR SKAGGS AMENDMENT TRANSACTIONS Document details the Federal Energy Management Program (FEMP) interagency agreement work order for the Skaggs Amendment Transactions....

5

Microsoft Word - Attachment 1 - NL Extended Field Work Proposal Template for Reserach Calla.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Attachment 1 Attachment 1 Project Area XX Program/Project Title For Office of Electricity Delivery and Energy Reliability Research and Development Division In Response To RC-CEDS-2012-02 Program Manager: XXXX Technical POC: XXXX 1. PROJECT SUMMARY [The project summary/abstract must contain a summary of the proposed activity suitable for dissemination to the public. It should be a self-contained document that identifies the lead National Laboratory and other team members, the project director/principal investigator(s), the project title, the objectives of the project, a description of the project, outcomes) This document must not include any proprietary or sensitive business information as DOE may make it available to the public.] 2. PROPOSAL TECHNICAL CONTENT

6

ORDER  

NLE Websites -- All DOE Office Websites (Extended Search)

Approved: 7-21-2011 SAFEGUARDS AND SECURITY PROGRAM U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security DOE O 470.4B DOE O 470.4B 1 7-21-11 SAFEGUARDS AND SECURITY PROGRAM 1. PURPOSE. To establish responsibilities for the U.S. Department of Energy (DOE) Safeguards and Security (S&S) Program, and to establish program planning and management requirements for the S&S Program. The requirements identified in this Order and its attachments and appendices are based on national policy promulgated in laws, regulations, Executive Orders, and national standards to prevent unacceptable adverse impacts on national security, the health and safety of DOE and contractor employees, the public, or the environment. 2. CANCELLATIONS. DOE O 470.4A, Safeguards and Security Program, dated 5-25-07;

7

ATTACHMENT IX Review of Air Products Fischer-Tropsch Synthesis Work  

E-Print Network (OSTI)

that would be typical of the gasification of natural gas were made. The work on the preparation-mixed. The Air Products workers wrote, "One of the more important aspects of gas flowing through a tubular to as gas holdup or void fraction, are values which are extremely important to optimum reactor design

Kentucky, University of

8

J.2 ATTACHMENT A- STATEMENT OF WORK A. SCOPE OF WORK STATEMENT OF WORK Specification for North American SynchroPhasor Initiative (NASPI)  

E-Print Network (OSTI)

The scope of work is limited to the contractor developing, and delivering a specification for a NASPI network

unknown authors

2008-01-01T23:59:59.000Z

9

ORDER  

Office of Legacy Management (LM)

system. a. Development. Written plans, orders and procedures covering FPF routine, emergency, and administrative duties; tactical deployment; and where required, other...

10

ORDER  

NLE Websites -- All DOE Office Websites (Extended Search)

Approved: 6-27-2011 PROTECTION PROGRAM OPERATIONS U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security DOE O 473.3 DOE O 473.3 1 6-27-11 PROTECTION PROGRAM OPERATIONS 1. PURPOSE. This Order establishes requirements for the management and operation of the Department of Energy (DOE) Federal Protective Forces (FPF), Contractor Protective Forces (CPF), and the Physical Security of property and personnel under the cognizance of DOE. The order does this by combining into one Protection Program Operations (PPO) order the baseline requirements which were contained in the manuals for physical protection, CPF, and FPF. This Order establishes requirements for the physical protection of interests under DOE's purview ranging from facilities, buildings,

11

ORDER  

Office of Legacy Management (LM)

for intelligence-related activities. i. DOE O 226.1A, Implementation of Department of Energy Oversight Policy, dated 7-31-07. This Order contains requirements and...

12

ORDER  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE O 475.2A Approved: 2-1-11 IDENTIFYING CLASSIFIED INFORMATION U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security DOE O 475.2A 1 2-1-11 IDENTIFYING CLASSIFIED INFORMATION 1. PURPOSE. To establish the program to identify information classified under the Atomic Energy Act [Restricted Data (RD), Formerly Restricted Data (FRD), and Transclassified Foreign Nuclear Information (TFNI)] or Executive Order (E.O.) 13526 [National Security Information (NSI)], so that it can be protected against unauthorized dissemination. 2. CANCELLATION. DOE O 475.2, Identifying Classified Information, dated 8-28-07, and DOE M 475.1-1B, Manual for Identifying Classified Information, dated 8-28-07. Cancellation of a directive does not, by itself, modify or otherwise affect any contractual

13

ORDER  

Office of Legacy Management (LM)

3-2010 3-2010 SCIENTIFIC AND TECHNICAL INFORMATION MANAGEMENT U.S. DEPARTMENT OF ENERGY Office of Scientific and Technical Information DOE O 241.1B DOE O 241.1B 1 12-13-2010 SCIENTIFIC AND TECHNICAL INFORMATION MANAGEMENT 1. PURPOSE. The U.S. Department of Energy (DOE) produces scientific and technical information (STI) in the course of performing research and development (R&D) and other science and technology activities. The purpose of this directive is to ensure that STI is appropriately managed as part of the DOE mission to enable the advancement of scientific knowledge and technological innovation. Therefore, the objectives of this order are to: a. establish DOE requirements and responsibilities to ensure that Departmental STI

14

ORDER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PP&L EnergyPlus Company PP&L EnergyPlus Company Order No. EA-210 I. BACKGROUND Exports of electricity from the United States to a foreign country are regulated and require authorization under section 202(e) of the Federal Power Act (FPA) (16 U.S.C. §824a(e)). On May 4, 1999, PP&L EnergyPlus Company (PP&L EnergyPlus) applied to the Office of Fossil Energy (FE) of the Department of Energy (DOE) for authorization to transmit electric energy to Canada as a power marketer. PP&L EnergyPlus, a limited liability company based in Pennsylvania, does not own or control any electric generating or transmission facilities, nor does it have a franchised service area. PP&L EnergyPlus proposes to purchase surplus electric energy from electric utilities and other suppliers within the United States and to export this energy on its own behalf to Canada.

15

Attachment FY2011-75 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment FY2011-75 Multiple-Award Contracts and Governmentwide Acquisition Contracts Including Delivery Orders and Task Orders Attachment FY2011-75 More Documents & Publications...

16

Attachment 1  

NLE Websites -- All DOE Office Websites (Extended Search)

May, 2003 May, 2003 1 Attachment 1 Sensitive Foreign Nations Controls SENSITIVE SUBJECTS Rev. 0 May, 2003 2 This is a list of areas of technical subject matter or technologies containing "sensitive" information. The list identifies subjects related to the development and production of weapons of mass destruction (nuclear, chemical, and biological) and their delivery systems (including missiles), conventional weapons, and other technologies deemed significant to the national security of the United States. Department of Energy (DOE) hosts of foreign visitor, DOE travelers, and others holding information on these subjects should be aware of all constraints on releasing information. They should also be cautious

17

Attachment Apparatus  

DOE Patents (OSTI)

The present invention includes an attachment apparatus comprising a rotation limiting member adapted to be threaded onto a threaded member; and a preload nut adapted to be threaded onto the threaded member. The rotation limiting member comprises a plurality of pins; and the preload nut comprises plurality of slots, preferably wherein the plurality of pins and the plurality of slots are the same in number, which is preferably three. The plurality of pins of the rotation limiting member are filled into a corresponding plurality of slots of the preload nut to form a rotatable unit adapted to be threaded onto the threaded member. In use, the rotatable unit is threaded onto the threaded member. The present invention thus provides a unitized removable device for holes, including holes other than circular in shape, which have an established depth before an end of, or before an enlargement of the hole. The configuration of some exposed part of the device, or the head, is shaped and formed for its intended purpose, such as clamping, anchor points, eye bolts, stud anchor, and the like. The device allows for the installation, preloading and removal of all components of the device, as a unit, without damage to the member for which attachment is required by simple rotations of some exposed part of the device.

Morrison, Edward F.

1998-08-18T23:59:59.000Z

18

DE-SOL-0005195/000002 Conformed Copy Attachment 5  

NLE Websites -- All DOE Office Websites (Extended Search)

Conformed Copy Attachment 5 07022013 ATTACHMENT 5 DOE Orders, Directives, Guides and Memos DOE O 142.3A, Unclassified Foreign Visits and Assignments Program The Order defines a...

19

work  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

THE THE U.S. DEPARTMENT OF ENERGY'S WORKING CAPITAL FUND U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES OCTOBER 1998 AUDIT REPORT CR-B-99-01 MEMORANDUM FOR THE DIRECTOR, BUSINESS MANAGEMENT STAFF FROM: William S. Maharay Acting Manager, Capital Regional Audit Office, Office of Inspector General SUBJECT: INFORMATION : Audit Report on the Department's Working Capital Fund BACKGROUND The Department established the Working Capital Fund (Fund) in January 1996 as a financial management tool for charging the costs of common services provided at Headquarters to Departmental program offices. The objectives in establishing the Fund were to increase efficiency of the Department's operations, improve management of administrative services

20

Complex higher order derivative theories  

SciTech Connect

In this work is considered a complex scalar field theory with higher order derivative terms and interactions. A procedure is developed to quantize consistently this system avoiding the presence of negative norm states. In order to achieve this goal the original real scalar high order field theory is extended to a complex space attaching a complex total derivative to the theory. Next, by imposing reality conditions the complex theory is mapped to a pair of interacting real scalar field theories without the presence of higher derivative terms.

Margalli, Carlos A.; Vergara, J. David [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Apartado Postal 70-543, Mexico 04510 DF (Mexico)

2012-08-24T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

High Performance Window Attachments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Performance Window High Performance Window Attachments D. Charlie Curcija Lawrence Berkeley National Laboratory dccurcija@lbl.gov 510-495-2602 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Impact of Project: * Motivate manufacturers to make improvements in Window systems U-Factors, SHGC and daylighting utilization * Increase awareness of benefits from energy efficient window attachments Problem Statement: * A wide range of residential window attachments are available, but they have widely unknown

22

Attachment 1 ? Appendix A ? Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

Center (NWTC) sites. The proper operation of these generators in the event of a primary power outage is crucial to NREL to maintain operations. 2.0 OBJECTIVE The objective is to...

23

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

Boyd, Gary L. (Alpine, CA)

1994-01-01T23:59:59.000Z

24

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

Boyd, G.L.

1994-12-13T23:59:59.000Z

25

Internal pipe attachment mechanism  

DOE Patents (OSTI)

An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

1994-12-13T23:59:59.000Z

26

Magnetically attached sputter targets  

DOE Patents (OSTI)

An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

Makowiecki, D.M.; McKernan, M.A.

1994-02-15T23:59:59.000Z

27

Ladder attachment platform  

SciTech Connect

A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

Swygert,; Richard, W [Springfield, SC

2012-08-28T23:59:59.000Z

28

ATTACHMENT J - APPENDIX I  

NLE Websites -- All DOE Office Websites (Extended Search)

No.: DE-AC02-09CH11466 Section J - Appendix I J-I-1 ATTACHMENT J.9 APPENDIX I DOE DIRECTIVES LIST B Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466...

29

Turbine nozzle attachment system  

DOE Patents (OSTI)

A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

Norton, Paul F. (San Diego, CA); Shaffer, James E. (Maitland, FL)

1995-01-01T23:59:59.000Z

30

Turbine nozzle attachment system  

DOE Patents (OSTI)

A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

Norton, P.F.; Shaffer, J.E.

1995-10-24T23:59:59.000Z

31

Regards, Attachment: As stated  

E-Print Network (OSTI)

Please find attached the 1st quarter groundwater monitoring report for the Section 4 lined evaporation ponds at the Ambrosia Lake mill facility. This report includes the quarterly reporting required for discharge permit DP-71. Also enclosed (NMED copy only) is a CD Copy of the Excel Summary Spreadsheet for the 1 st quarter groundwater monitoring report, Section 4 lined evaporation ponds. This CD Copy meets the requirements of Condition 15B of

Chuck Wentz

2011-01-01T23:59:59.000Z

32

Page 1 of 7 Attachment to Notice  

E-Print Network (OSTI)

information about ongoing staff work from which Energy Commission forecasts of future transportation fuelPage 1 of 7 Attachment to Notice 2011 Integrated Energy Policy Report ­ Transportation Fuel of a Transportation Committee workshop on transportation fuel infrastructure issues. This provides further details

33

Attachment 1-SF 18.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QUOTATIONS QUOTATIONS This Notice of Small Business-Small-Purchase Set-Aside on the Attachment 1 PAGE OF PAGES (THIS IS NOT AN ORDER) reverse of this form is not applicable. 1 1 REQUEST NO. DE-RQ01-04ME90001 DATE ISSUED June 16,2004 18. REQUISITION/PURCHASE REQUEST NO. 01-04ME90001.000 18. CERT. FOR NAT.DEF. UNDER BDSA REG.2 AND/OR DMS REG. 1 ⇒ RATING 5A. ISSUED BY 6. DELIVER BY (Date) U.S. Department of Energy Office of Headquarters Procurement Services, ME-641.2 1000 Independence Avenue, SW Washington, D.C. 20585 7. DELIVERY 5B. FOR INFORMATION CALL: (Name and telephone no.) (No collect calls) Debbie Draper (202) 287-1437 FOB OTHER

34

Attached sunspace design analysis  

DOE Green Energy (OSTI)

An introduction to new design analysis information for attached sunspaces is presented. The 28 sunspace reference designs are described. Note is taken of those designs (the semi-enclosed geometries) analyzed more recently than the previously published reports. The role of sensitivity studies is discussed, and some sample plots of sunspace performance sensitivity to key design parameters are presented. The monthly solar load ratio (SLR) correlations are reviewed with emphasis on the modified SLR used in the sunspace analysis. The application of the sunspace SLR correlations to monthly design analysis is outlined.

Jones, R.W.; McFarland, R.D.

1981-01-01T23:59:59.000Z

35

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

1996-01-01T23:59:59.000Z

36

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

Frey, G.A.; Jimenez, O.D.

1996-12-03T23:59:59.000Z

37

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

Shaffer, James E. (Maitland, FL)

1995-01-01T23:59:59.000Z

38

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

Shaffer, James E. (Maitland, FL)

1995-01-01T23:59:59.000Z

39

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

Shaffer, J.E.

1995-07-11T23:59:59.000Z

40

Ceramic blade attachment system  

DOE Patents (OSTI)

A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

Shaffer, J.E.

1995-01-10T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Exhibit A, Attachment A-1 Exhibit A Attachment A-1  

E-Print Network (OSTI)

energy retrofit incentive programs and tax credits. · Regional priority for program delivery ­ Collaborate with Clean Energy Training Program to support local training programs for skills necessary1 Exhibit A, Attachment A-1 Exhibit A Attachment A-1 Elements of Energy Upgrade California Program

42

ATTACHMENT J - APPENDIX I  

NLE Websites -- All DOE Office Websites (Extended Search)

0140 0140 Contract No.: DE-AC02-09CH11466 Section J - Appendix I J-I-1 ATTACHMENT J.9 APPENDIX I DOE DIRECTIVES / LIST B Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification 0140 Contract No.: DE-AC02-09CH11466 Section J - Appendix I J-I-2 DOE Directive Date Title ES&H O 150.1 05/08/08 Continuity Program O 151.1C 11/02/05 Comprehensive Emergency Management System O 210.2A 04/08/11 DOE Corporate Operating Experience Program O 225.1B 03/04/11 Accident Investigations O 231.1B Chg. 1 06/27/11 11/28/12 Environment, Safety and Health Reporting (10 CFR 851, DOE Worker Safety and Health Program Rule, incorporates DOE M 231.1-1A by reference and remains applicable until reference is removed from 10 CFR 851.)

43

Attachment J TERMS AND CONDITIONS  

E-Print Network (OSTI)

Attachment J TERMS AND CONDITIONS AWARD # PON-10-603 #12;TERMS AND CONDITIONS TABLE OF CONTENTS ............................................................................... 24 i #12;TERMS AND CONDITIONS 1. Grant Agreement This project is being funded with a grant from is comprised of the grant funding award, the Terms and Conditions, and all attachments. These Terms

44

Attachment K TERMS AND CONDITIONS  

E-Print Network (OSTI)

Attachment K TERMS AND CONDITIONS AWARD # #12;TERMS AND CONDITIONS TABLE OF CONTENTS SECTION PAGE ............................................................................... 24 i #12;TERMS AND CONDITIONS 1. Grant Agreement This project is being funded with a grant from, the Terms and Conditions, and all attachments. These Terms and Conditions are standard requirements

45

New developments for the site-specific attachment of protein to surfaces  

DOE Green Energy (OSTI)

Protein immobilization on surfaces is of great importance in numerous applications in biology and biophysics. The key for the success of all these applications relies on the immobilization technique employed to attach the protein to the corresponding surface. Protein immobilization can be based on covalent or noncovalent interaction of the molecule with the surface. Noncovalent interactions include hydrophobic interactions, hydrogen bonding, van der Waals forces, electrostatic forces, or physical adsorption. However, since these interactions are weak, the molecules can get denatured or dislodged, thus causing loss of signal. They also result in random attachment of the protein to the surface. Site-specific covalent attachment of proteins onto surfaces, on the other hand, leads to molecules being arranged in a definite, orderly fashion and uses spacers and linkers to help minimize steric hindrances between the protein surface. This work reviews in detail some of the methods most commonly used as well as the latest developments for the site-specific covalent attachment of protein to solid surfaces.

Camarero, J A

2005-05-12T23:59:59.000Z

46

Attachment B.xls | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B.xls Attachment B.xls More Documents & Publications Attachment 5 Volume II Pricing Matrix.xls&0; Attachment 6 Volume V Pricing Matrix for Optional Enhancements.xls&0;...

47

Attachment J-1  

NLE Websites -- All DOE Office Websites (Extended Search)

J-1 J-1 June 3, 2011 1 Statement of Work (SOW) Security Protective Force and Systems Services For the Nevada Site Office I. INTRODUCTION This SOW encompasses a range of Security Protective Force and Systems (ProForce) services to be provided for the U.S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Contractor performance shall be in accordance with this SOW and evaluated through the Award Fee Plan. Protective Force stations and patrols identified herein are generally staffed as specified in this section; however, changes may occur based on programmatic requirements as directed by the Contracting Officer or designated representative. The mission of the Contractor is the physical protection of national safeguards and security

48

Attachment E: Emergency Response Activities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment E: Emergency Response Activities Attachment E: Emergency Response Activities Attachment E: Emergency Response Activities Emergency Response Activities States may or may not elect to fund emergency management activities with AIP money. If they do, the AIP should include an Emergency Management section. This section may be implemented at any time - when the AIP is first negotiated, at renewal, or through amendment. This Attachment provides examples of items that might be appropriate in an AIP's Emergency Management section (most have come directly from existing AIPs). These items should be considered neither requirements or restrictions. Since funding is not available to support all of these activities, the AIP should be tailored to reflect the State's most urgent and realistic needs in order

49

ATTACHMENT L-__ PAST PERFORMANCE INFORMATION QUESTIONNAIRE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PAST PERFORMANCE INFORMATION QUESTIONNAIRE PAST PERFORMANCE INFORMATION QUESTIONNAIRE COVER LETTER (JUL 2010) Date Dear:_______________ The Department of Energy is seeking your assistance on a very important procurement. __[insert name of offeror]___________________________is participating in a proposal for a DOE contract. _[insert name of offeror]____________has identified you as someone who is familiar with their past performance on similar work. We are asking you to complete the attached Past Performance Information Questionnaire to help DOE evaluate __[insert name of offeror]_________________'s past performance. We greatly appreciate your time and assistance in completing this questionnaire. In accordance with Part 15.506 of the Federal Acquisition Regulation, the names of

50

Energy Savings from Window Attachments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

from from Window Attachments October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Lawrence Berkeley National Laboratory October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared By: Lawrence Berkeley National Laboratory One Cyclotron Road, MS 90R3111 Berkeley, CA 94720 Authors: D. Charlie Curcija Mehry Yazdanian Christian Kohler Robert Hart Robin Mitchell Simon Vidanovic 1 ENERGY SAVINGS FROM WINDOW ATTACHMENTS TABLE OF CONTENTS: TABLE OF CONTENTS:................................................................................................... 1 1. EXECUTIVE SUMMARY ......................................................................................... 3

51

Energy Savings from Window Attachments  

NLE Websites -- All DOE Office Websites (Extended Search)

from from Window Attachments October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared by: Lawrence Berkeley National Laboratory October 2013 Prepared for: Building Technologies Office Office of Energy Efficiency and Renewable Energy U.S. Department of Energy Prepared By: Lawrence Berkeley National Laboratory One Cyclotron Road, MS 90R3111 Berkeley, CA 94720 Authors: D. Charlie Curcija Mehry Yazdanian Christian Kohler Robert Hart Robin Mitchell Simon Vidanovic 1 ENERGY SAVINGS FROM WINDOW ATTACHMENTS TABLE OF CONTENTS: TABLE OF CONTENTS:................................................................................................... 1 1. EXECUTIVE SUMMARY ......................................................................................... 3

52

Planning and Management Consultants, Limited (PMCL) Task Order # 62: Assessment and Incorporation of Risk Management Principles into USACE Civil Works Infrastructure  

E-Print Network (OSTI)

The project summarized in this report had two objectives. The first objective was to develop and test a valid and viable methodology that could be used by the USACE to prioritize Operations and Maintenance (O&M) general funding between civil infrastructure protection and ongoing maintenance funds. Various multi attribute decision modeling and analysis methodologies were studied and a method based on the Analytic Hierarchy Process (AHP) as implemented in the software tool Expert Choice was proposed for use in a USACE case study. The second objective was to demonstrate the prioritization model in a case study. The North West Division (NWD) was chosen as geographical domain for testing this integrated prioritization methodology and nine USACE project sites on the Columbia/Snake River system were selected as the test bed. This case study required the prioritization of several security work packages and hundreds of operations and maintenance work packages. The case study demonstrated that security related O&M work packages may be integrated into the O&M budget using a structured prioritization method. The AHP based multi-attribute Decision Model constructed for this demonstration project was a four level hierarchy designed to reflect the USACE strategy of managing by business lines. The top Level (Level 1) states the USACE O&M goal, to maintain the design benefits of USACE projects by meeting

Gregory Shaw D. Sc

2005-01-01T23:59:59.000Z

53

Reliability Testing the Die-Attach of CPV Cell Assemblies  

DOE Green Energy (OSTI)

Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

Bosco, N.; Sweet, C.; Kurtz, S.

2011-02-01T23:59:59.000Z

54

ATTACHMENT E TERMS AND CONDITIONS  

E-Print Network (OSTI)

ATTACHMENT E TERMS AND CONDITIONS TABLE OF CONTENTS SECTION PAGE NO. 1. Vehicle Buy-Down Incentive Program Agreement................................................ 1 2. Term of the Agreement..................................................................................................... 14 #12;TERMS AND CONDITIONS 1. Vehicle Buy-Down Incentive Program Agreement The Vehicle Buy

55

Microsoft Word - SUPPLEMENT 1 TO ATTACHMENT A102609Final.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

1, Rev C 1 of 6 Approved 10/27/09 1, Rev C 1 of 6 Approved 10/27/09 SUPPLEMENT 1 TO ATTACHMENT A WORK BY CONTRACTORS ON THE BROOKHAVEN NATIONAL LABORATORY SITE - SUPPLEMENTAL CONDITIONS Article 1 Identification of Employees (a) The Contractor agrees, pursuant to Executive Order 12989, to use an electronic employment Eligibility Verification (E-Verify) system designated by the Secretary of Homeland Security to verify the eligibility of: (i) all persons hired during the contract term by the Contractor to perform duties within the United States; and (ii) all persons assigned by the Contractor to perform work within the United States on the Federal Contract. The Contractor agrees to incorporate the substance of this clause in all subcontracts under this contract. (b) All contractor and subcontractor employees who will perform work on the Brookhaven National

56

Attachment of radon progeny to cigarette-smoke aerosols  

SciTech Connect

The daughter products of radon gas are now recognized as a significant contributor to radiation exposure to the general public. It is also suspected that a synergistic effect exists with the combination cigarette smoking and radon exposure. We have conducted an experimental investigation to determine the physical nature of radon progeny interactions with cigarette smoke aerosols. The size distributions of the aerosols are characterized and attachment rates of radon progeny to cigarette-smoke aerosols are determined. Both the mainstream and sidestream portions of the smoke aerosol are investigated. Unattached radon progeny are very mobile and, in the presence of aerosols, readily attach to the particle surfaces. In this study, an aerosol chamber is used to contain the radon gas, progeny and aerosol mixture while allowing the attachment process to occur. The rate of attachment is dependent on the size distribution, or diffusion coefficient, of the radon progeny as well as the aerosol size distribution. The size distribution of the radon daughter products is monitored using a graded-screen diffusion battery. The diffusion battery also enables separation of the unattached radon progeny from those attached to the aerosol particles. Analysis of the radon decay products is accomplished using alpha spectrometry. The aerosols of interest are size fractionated with the aid of a differential mobility analyzer and cascade impactor. The measured attachment rates of progeny to the cigarette smoke are compared to those found in similar experiments using an ambient aerosol. The lowest attachment coefficients observed, {approximately}10{sup {minus}6} cm{sup 3}/s, occurred for the ambient aerosol. The sidestream and mainstream smoke aerosols exhibited higher attachment rates in that order. The results compared favorably with theories describing the coagulation process of aerosols.

Biermann, A.H.; Sawyer, S.R.

1995-05-01T23:59:59.000Z

57

Attachment 1 ? Appendix A ? Revised Statement of Work for RFP...  

NLE Websites -- All DOE Office Websites (Extended Search)

for - * Wear * Defective welds * Deformation * Increase in length iii. Inspections of wire rope slings shall include a thorough inspection for - * Permanently affixed and legible...

58

Microsoft Word - Attachment 1 - NL Extended Field Work Proposal...  

NLE Websites -- All DOE Office Websites (Extended Search)

gone into this effort. Provide additional NotesComments as needed Example 3.1. Smart Grid Cybersecurity R&D 3.1.1. Task Description 2 Create a software application to manage...

59

ATTACHMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy Policy Act N E P A PROCEDURES for SUBMITTING DOCUMENTS for POSTING on the DOE NEPA WEBSITE www.gc.energy.gov/NEPA August 2008 U.S. Department of Energy Office of General Counsel Office of NEPA Policy and Compliance U.S. Department of Energy, Office of NEPA Policy and Compliance August 2008 1 PREFACE The DOE NEPA Website has served as the focal point for DOE NEPA practice since it was created in 1993. A reorganization in which the Office of NEPA Policy and Compliance became part of the Office of the General Counsel provided an opportunity to modernize the original DOE NEPA Website. Therefore, the Office of NEPA Policy and Compliance recently launched a brand new DOE NEPA Website at a new internet address: www.gc.energy.gov/NEPA/. The new DOE NEPA Website contains all of the

60

Attachment  

NLE Websites -- All DOE Office Websites (Extended Search)

Ivan'kovskoe Reservoir Ivan'kovskoe reservoir was created in 1938 by closing the Volga river waterway in the area of the town of Dubna. Major Specifications Type: River-like Water surface area: 3,278.0 km 2 Volume: 1.12 km 3 Length: 133 km Maximum width: 8.0 km Average depth: 3.4 m Maximum depth: 20.0 m Average annual water intake: through Ivan'kovskaya HPP 7.74 km 3 through Moscow Channel 6.82 km 3 Annual water exchange coefficient: 13 The major HPP facilities include the following: locks for navigation, concrete dam with eight openings designed for the maximum flow rate of 7,350 m 3 /sec and the hydroelectric station itself. The Ivan'kovskaya HPP is a low head facility, with the

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Split ring containment attachment device  

DOE Patents (OSTI)

A containment attachment device is described for operatively connecting a glovebag to plastic sheeting covering hazardous material. The device includes an inner split ring member connected on one end to a middle ring member wherein the free end of the split ring member is inserted through a slit in the plastic sheeting to captively engage a generally circular portion of the plastic sheeting. A collar portion having an outer ring portion is provided with fastening means for securing the device together wherein the glovebag is operatively connected to the collar portion. Hazardous material such as radioactive waste may be sealed in plastic bags for small items or wrapped in plastic sheeting for large items. Occasionally the need arises to access the hazardous material in a controlled manner, that is, while maintaining total containment. Small items could be placed entirely inside a containment glovebag. However, it may not be possible or practical to place large items inside a containment; instead, one or more glovebags could be attached to the plastic sheeting covering the hazardous material. It is this latter application for which the split ring containment attachment device is intended.

Sammel, A.G.

1995-12-31T23:59:59.000Z

62

Predicting Envelope Leakage in Attached Dwellings  

SciTech Connect

The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

Faakye, O.; Arena, L.; Griffiths, D.

2013-07-01T23:59:59.000Z

63

Development of office paper attachment methodologies  

E-Print Network (OSTI)

A design project was carried out which began with the study and critique of office paper attachment systems, such as paperclips and staples. A set of criteria for an ideal system of attachment was then developed. This led ...

Slowik, Jonathan (Jonathan Steven)

2006-01-01T23:59:59.000Z

64

Disseminating the Kilogram, No Strings Attached  

Science Conference Proceedings (OSTI)

Disseminating the Kilogram, No Strings Attached. August 24, 2012. ... The impending redefinition of the kilogram presents a weighty dilemma. ...

2013-01-03T23:59:59.000Z

65

Attachment FY2011-75 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

66

order form  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Order Form Customer Order Form Fermilab Education Office - Customer Order Form PO BOX 500, MS 777, Batavia, IL 60510 * ph. 630-840-8258 * fax 630-840-2500 * avarry@fnal.gov Date: This order be: SHIPPED PICKED UP? Bill to: Ship to: Contact/Institution name: Email: Phone: Fax: Payment method (please circle): Visa/MasterCard - Check - Purchase Order  Visa/MasterCard # P.O. # Exp Date: Quantity Ordered Item Name Item Description (color, size, etc.) Price Each Total Amount  For purchases over $200 only *IL residents ONLY: Add 7.5% sales tax to your order.

67

Methane production by attached film  

DOE Patents (OSTI)

A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

Jewell, William J. (202 Eastwood Ave., Ithaca, NY 14850)

1981-01-01T23:59:59.000Z

68

Policy Flash 2013-33 Department of Energy Order 206.2 Identity, Credential and Access Managment (ICAM)  

Energy.gov (U.S. Department of Energy (DOE))

Attached is Policy Flash 2013-33 Department of Energy Order 206.2 Identity, Credential and Access Managment (ICAM)

69

Attachment 3, Budget Information, SF 424A  

NLE Websites -- All DOE Office Websites (Extended Search)

ATTACHMENT 3 OMB Approval No. 0343 0044 BUDGET INFORMATION - Non-Construction Programs SECTION A - BUDGET SUMMARY Grant Program Function or Activity (a) Catalog of Federal...

70

Molecular mechanisms of kinetochore microtubule attachment  

E-Print Network (OSTI)

To ensure equal chromosome segregation during mitosis, the macromolecular kinetochore must remain attached to depolymerizing microtubules, which drive poleward chromosome movement. Microtubules are highly dynamic structures ...

Schmidt, Jens C. (Jens Christopher)

2012-01-01T23:59:59.000Z

71

ATTACHMENT J.3 - APPENDIX C  

NLE Websites -- All DOE Office Websites (Extended Search)

M060 M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-1 ATTACHMENT J.3 APPENDIX C SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-2 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-3 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-4 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-5 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-6 Modification No. M060 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-7 Modification No. M060 Contract No.: DE-AC02-09CH11466

72

Coexistence in preferential attachment networks  

E-Print Network (OSTI)

Competition in markets is ubiquitous: cell-phone providers, computer manufacturers, and sport gear brands all vie for customers. Though several coexisting competitors are often observed in empirical data, many current theoretical models of competition on small-world networks predict a single winner taking over the majority of the network. We introduce a new model of product adoption that focuses on word-of-mouth recommendations to provide an explanation for this coexistence of competitors. The key property of our model is that customer choices evolve simultaneously with the network of customers. When a new node joins the network, it chooses neighbors according to preferential attachment, and then chooses its type based on the number of initial neighbors of each type. This can model a new cell-phone user choosing a cell-phone provider, a new student choosing a laptop, or a new athletic team member choosing a gear provider. We provide a detailed analysis of the new model; in particular, we determine the possibl...

Antunovi?, Ton?i; Racz, Miklos Z

2013-01-01T23:59:59.000Z

73

ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT Site: Federal or Contractor Program: Name: ____________________________________________ Title:______________________________________________ Organization:_______________________________________ Address: __________________________________________ Bldg and Room Number _____________________________ Phone Number __________________ E-Mail ________________________________ Years of Records Management experience? Length of time in current position? Training? __________________________________________________________________ Signature: Date: 02/03/2010 2 INSTITUTIONALIZATION

74

Canonizable partial order generators  

Science Conference Proceedings (OSTI)

In a previous work we introduced slice graphs as a way to specify both infinite languages of directed acyclic graphs (DAGs) and infinite languages of partial orders. Therein we focused on the study of Hasse diagram generators, i.e., slice graphs that ... Keywords: automata, canonization, partial orders

Mateus de Oliveira Oliveira

2012-03-01T23:59:59.000Z

75

Electrolux: Order (2012-CE-1901)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrolux North America, Electrolux North America, Respondent Issued: July 27, 2012 ) ) ) ) ) ORDER Case Number: 2012-CE-1901 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Electrolux North America ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

76

Sunpentown: Order (2012-CE-1505)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BEFORETHE BEFORETHE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 In the Matter of: Sunpcntown International Inc. Respondent Issued: August 2, 2012 ) ) ) ) ) ) ORDER Case Number: 2012-CE-1505 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Sunpentown Intemational Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.P.R. § 429.12. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and

77

Microsoft Word - ARRAGuideAttachment10v1.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment 10 Attachment 10 BUY AMERICAN ISSUES IN THE RECOVERY ACT FOR FINANCIAL ASSISTANCE AGREEMENTS The Office of Management and Budget (OMB) issued interim guidance for financial assistance actions funded by the Recovery Act in March 2009. Public comments on the interim guidance have been received and are currently being analyzed by OMB. The following questions and answers address many issues that are expected to be clarified in OMB's final guidance, and will be updated as needed. 1. What are the Buy American restrictions in the Recovery Act? The Buy American provision in the Recovery Act (section 1605 of Title XI), directs that, subject to certain exceptions, no funds appropriated or otherwise made available for a project may be used for the construction, alteration, or repair of a public building or public work unless all the

78

Expert Meeting Report: Cladding Attachment Over Exterior Insulation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cladding Attachment Over Cladding Attachment Over Exterior Insulation P. Baker Building Science Corporation October 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or

79

Postnominal prepositional phrase attachment in proteomics  

Science Conference Proceedings (OSTI)

We present a small set of attachment heuristics for postnominal PPs occurring in full-text articles related to enzymes. A detailed analysis of the results suggests their utility for extraction of relations expressed by nominalizations (often with several ...

Jonathan Schuman; Sabine Bergler

2006-06-01T23:59:59.000Z

80

Chemomechanics of attached and suspended cells  

E-Print Network (OSTI)

Chemomechanical coupling in single eukaryotic animal cells is investigated in the con- text of the attached (substratum-adhered) and the suspended (free-floating) states. These dichotomous configurations determine behavioral ...

Maloney, John Mapes

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Attachment FY2011-3(3) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3) Attachment FY2011-3(3) Stripes Template for Interagency Agreement Attachment FY2011-3(3) More Documents & Publications AttachmentFlash2011-3(7).pdf ATTACHMENTFLASH2011-31AL2011-...

82

Attachment 5 Volume II Pricing Matrix.xls | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 Volume II Pricing Matrix.xls&0; Attachment 5 Volume II Pricing Matrix.xls&0; Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Attachment 6 Volume V...

83

Attachment FY2011-46(4) OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4) OPAM Attachment FY2011-46(4) OPAM Types of Compliance Requirements Chart Attachment FY2011-46(4) OPAM More Documents & Publications FLASH2011-46-OPAM Attachment FY2011-80 OPAM...

84

Attachment FY2011-83 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment FY2011-83 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and...

85

Attachment 6 Volume V Pricing Matrix for Optional Enhancements...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment 6 Volume V Pricing Matrix for Optional Enhancements.xls&0; Attachment 6 Volume V Pricing Matrix for Optional Enhancements.xls&0; Attachment 6 Volume V Pricing Matrix...

86

Attachment FY2011-77 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Attachment FY2011-77 OPAM Attachment FY2011-77 OPAM Data Quality Plan Attachment FY2011-77 OPAM More Documents & Publications Flash2011-77...

87

Attachment FY2011-31 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 OPAM Attachment FY2011-31 OPAM attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 Attachment FY2011-31 OPAM More Documents & Publications...

88

Attachment FY2011-15 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Agencies You are here Home Attachment FY2011-15 OPAM Attachment FY2011-15 OPAM FAR Dollar Threshold Changes Attachment FY2011-15 OPAM More Documents & Publications Flash2011-15...

89

Executive Order 2010-001: New Mexico Clean Energy Economy Action Report from the Deep Source Geothermal Commercialization Working Group to the Green Jobs Council and Clean Energy Development Council: New Mexico Geothermal Resource Assessment and Data Base  

E-Print Network (OSTI)

Executive Order 2010-001 establishes directives for the Energy Minerals and Natural Resources Department (EMNRD) and New Mexico Tech (NMT) to convene a Geothermal Group to oversee the development of a statewide geothermal resource assessment and data base and develop technical and policy recommendations to accelerate full-scale development of New Mexicos deep-source geothermal resource: EMNRD, with the cooperation of the New Mexico Institute ofMining and Technology (NMT), shall convene a Deep Source Geothermal Commercialization Working Group (Geothermal Group) no later than March 1, 2010. The Geothermal Group shall be chaired by EMNRD. The Geothermal Group shall oversee the development of a statewide geothermal resource assessment and database. The purpose of the resource assessment and database shall be to sufficiently characterize the States geothermal resource and provide a database to prospective geothermal developers that shall promote commercial-scale development of the States geothermal resource. The Geothermal Group shall also develop technical and policy recommendations to accelerate full-scale development of New Mexicos deep-source geothermal resource.

Bill Richardson; Jim Noel; Karen W. Garcia

2010-01-01T23:59:59.000Z

90

Vacuum Attachment for Collection of Lithium Powder ---- Inventor...  

NLE Websites -- All DOE Office Websites (Extended Search)

Vacuum Attachment for Collection of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect...

91

Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sites Power Marketing Administration Other Agencies You are here Home Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies...

92

Microsoft Word - Policy Flash 2011-2 Attachment 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

activities on DOE facilities or using DOE email addresses. The General Counsel has issued guidance on this issue for federal employees [see attached]. The following Q&A relates to contractors' use of Government property for political activity. Please ensure that your contractors are aware of and respect these limitations. Contractor Political Activity Q: Are DOE contractors permitted to use Government property or facilities to conduct political activity? A: No, political activity is not an authorized use of Government property or facilities and the Contracting Officer will not approve or allow its use. Q: Does DOE Order 203.1, which is entitled, "Limited Personal use of Government

93

Microsoft PowerPoint - Executive Order13423rbl | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Microsoft PowerPoint - Executive Order13423rbl More Documents & Publications Microsoft PowerPoint - DonsSlides121307 OPAM Policy Acquisition Guides AttachmentFlash2010-39.pdf...

94

Attachment J Information on Compliance with Prevailing Basic Provisions  

E-Print Network (OSTI)

. Surveying. Electrical work such as wiring. Carpentry work. Limited inspection activities. Specific Job with DIR. · Are apprentices covered by prevailing wage requirements under California law? An apprentice at the apprentice wage rate on projects involving public works in limited circumstances. More specifically, in order

95

Nuclear reactor fuel rod attachment system  

DOE Patents (OSTI)

A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

Christiansen, David W. (Kennewick, WA)

1982-01-01T23:59:59.000Z

96

Attachment 14 Special Terms and Conditions  

E-Print Network (OSTI)

Attachment 14 Exhibit D Special Terms and Conditions Exhbit D PON-12-605 Special Terms. By accepting this grant, Recipient as a material term of this agreement shall be fully responsible wage. Therefore, as a material term of this grant, Recipient must either: (a) Proceed on the assumption

97

Designing for Emotional Attachment to Energy Approaching energy as materiality Design exploration: Energy Mementos  

E-Print Network (OSTI)

Designing for Emotional Attachment to Energy Approaching energy as materiality Design exploration: Energy Mementos We have been developing a perspective on energy-as-materiality and employing a designerly approach of materializing energy exploration in order to understand what energy is and how we are and could

Paulos, Eric

98

Attachment 7 - Solicitation Provisions.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment 7 Attachment 7 1 FAR CLAUSES 52.204-7 Central Contractor Registration (Oct 2003) (a) Definitions. As used in this clause- "Central Contractor Registration (CCR) database" means the primary Government repository for Contractor information required for the conduct of business with the Government. "Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. "Data Universal Numbering System +4 (DUNS+4) number" means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion

99

Flexible Network Attached Storage using Remote DMA  

E-Print Network (OSTI)

We propose to make nodes in a cluster double as compute nodes and network attached storage (NAS) nodes. This allows for a flexible and customizable storage system as the NAS control software is handled by regular workstations. The nodes can still be efficient compute nodes if networks with remote DMA capabilities are used, as such networks remove the processor from the data forwarding loop. We demonstrate this through measurements of a prototype implementation.

Jrgen S. Hansen

2001-01-01T23:59:59.000Z

100

Stress Indices for Elbows with Trunnion Attachments  

Science Conference Proceedings (OSTI)

Trunnions on elbows are generally used as supports and are also used in some applications as anchors. The qualification of trunnions is an important item in the design and fitness-for-service of many piping systems. This report provides equations, based on experimental and test data, for determining the stress indices, B and C, and the flexibility factor, k, for elbows with hollow circular cross-section attachments (trunnions). The report contains explicit modifications to ASME Code Cases 391 and 392 for...

1998-12-15T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Mass and fans in attached sunspaces  

DOE Green Energy (OSTI)

The effect of thermal storage mass on the performance of an attached sunspace is investigated for a particular design in Boston. Mass in the sunspace and in the adjoining building are compared. Performance is evaluated in terms of temperature conditions in the sunspace and delivery of useful solar heat to the adjoining building. The dependence of the results on the manner of heat delivery is studied. Both natural convection and fan-forced air flow are included.

Jones, R.W.; McFarland, R.D.; Lazarus, G.S.

1982-01-01T23:59:59.000Z

102

A neurocomputational approach to prepositional phrase attachment ambiguity resolution  

Science Conference Proceedings (OSTI)

A neurocomputational model based on emergent massively overlapping neural cell assemblies (CAs) for resolving prepositional phrase (PP) attachment ambiguity is described. PP attachment ambiguity is a well-studied task in natural language processing and ...

Kailash Nadh; Christian Huyck

2012-07-01T23:59:59.000Z

103

AttachmentFlash2010-75.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5.pdf AttachmentFlash2010-75.pdf AttachmentFlash2010-75.pdf More Documents & Publications DEAR952.204-2SecrutiyClause(AUG2009)RequirementFactSheet.pdf Flash2010-75.pdf...

104

Enhanced negative ion formation via electron attachment to electronically-excited states  

DOE Green Energy (OSTI)

Recent basic studies on electron attachment to laser-excited molecules show that electron attachment to electronically-excited states can have orders of magnitude larger cross sections compared to the respective ground electronic states. Even though systematic studies have not been conducted, there are indications that electronically-excited states may play a significant role in negative ion formation in gas discharges. The high-lying Rydberg states could be of particular significance since, (i) their production efficiencies are high, and (ii) they have comparatively long lifetimes. Such states could be populated in discharge sources via direct electron impact or via excitation transfer from metastable states of inert gases.

Pinnaduwage, L.A. [Oak Ridge National Lab., TN (United States). Health Sciences Research Div.]|[Univ. of Tennessee, Knoxville, TN (United States). Dept. of Physics

1995-12-31T23:59:59.000Z

105

Attachment Implementation Procedures to Report Deferred, Actual, and Required Maintenance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft July 9, 2009 Draft July 9, 2009 1 Attachment Implementation Procedures to Report Deferred, Actual, and Required Maintenance On Real Property 1. The following is the FY 2009 implementation procedures for the field offices/sites to determine and report deferred maintenance on real property as required by the Statement of Federal Financial Accounting Standards (SFFAS) No. 6, Accounting for Property, Plant, and Equipment (PP&E) and DOE Order 430.1B, Real Property Asset Management (RPAM). a. This document is intended to assist field offices/sites in consistently and accurately applying the appropriate methods to determine and report deferred maintenance estimates and reporting of annual required and actual maintenance costs. b. This reporting satisfies the Department's obligation to recognize and record deferred

106

Attachment Implementation Procedures to Report Deferred, Actual, and Required Maintenance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final July 01, 2010 Final July 01, 2010 1 Attachment Implementation Procedures to Report Deferred, Actual, and Required Maintenance On Real Property 1. The following is the FY 2010 implementation procedures for the field offices/sites to determine and report deferred maintenance on real property as required by the Statement of Federal Financial Accounting Standards (SFFAS) No. 6, Accounting for Property, Plant, and Equipment (PP&E) and DOE Order 430.1B, Real Property Asset Management (RPAM). a. This document is intended to assist field offices/sites in consistently and accurately applying the appropriate methods to determine and report deferred maintenance estimates and reporting of annual required and actual maintenance costs. b. This reporting satisfies the Department's obligation to recognize and record deferred

107

C:\Eco-SSLs\Final Guidance November 2003\Attachments\Attachment 4-3\Revised TRV SOP 12012002.wpd  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Guidance for Developing Ecological Soil Screening Levels (Eco-SSLs) Eco-SSL Standard Operating Procedure (SOP) #4: Wildlife Toxicity Reference Value Literature Review, Data Extraction and Coding OSWER Directive 92857-55 Issued November 2003 Revised October 2005 This page left intentionally blank Attachment 4-3 Standard Operating Procedure (SOP) #4: Wildlife Toxicity Reference Value Literature Review, Data Extraction and Coding for Ecological Soil Screening Levels (Eco-SSLs) OSWER Directive 92857-55 October 2005 Prepared for USEPA Region 8 by Syracuse Research Corporation Denver, Colorado 80123 maintained by Computer Sciences Corporation Duluth, Minnesota 55804 Contract 68-W01-032, Task Order No. 24 This page left intentionally blank i TABLE OF CONTENTS 1.0 INTRODUCTION

108

Attachment 9 - SCA Oregon.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

439 OR,EUGENE DE-RQ01-04ME90001 439 OR,EUGENE DE-RQ01-04ME90001 ATTACHMENT 9 WAGE DETERMINATION NO: 94-2439 REV (20) AREA: OR,EUGENE HEALTH AND WELFARE LEVEL - INSURANCE ONLY **OTHER WELFARE LEVEL WD: 94-2440** ****************************************************************************** REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 1994-2439

109

Attachment 8 - SCA Washington.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

103 DC,DISTRICT-WIDE DE-RQ01-04ME90001 103 DC,DISTRICT-WIDE DE-RQ01-04ME90001 ATTACHMENT 8 WAGE DETERMINATION NO: 94-2103 REV (30) AREA: DC,DISTRICT-WIDE HEALTH AND WELFARE LEVEL - INSURANCE ONLY **OTHER WELFARE LEVEL WD: 94-2104** ****************************************************************************** REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 1994-2103

110

Attachment 10 - SCA Washington.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-1183 37 Elevator Services [8] DE-RQ01-04ME90001 -1183 37 Elevator Services [8] DE-RQ01-04ME90001 ATTACHMENT 10 REGISTER OF WAGE DETERMINATIONS UNDER ³ U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT ³ EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor ³ WAGE AND HOUR DIVISION ³ WASHINGTON, D.C. 20210 ³ ³ William W. Gross Division of Wage ³ Wage Determination No: 1978-1183 Director Determinations ³ Revision No: 37 ³ Date Of Revision: 06/02/2003 --------------------------------------------------------------------------------

111

al99-06attachment.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

------------------------------- ------------------------------- -------------------------AL-99-06[DATED 8/27/99] ATTACHMENT MODEL PROJECT AGREEMENT FOR PARTNER PROJECTS BETWEEN THE INTERNATIONAL SCIENCE AND TECHNOLOGY CENTER, INSTITUTIONS IN THE RUSSIAN FEDERATION AND OTHER INTERESTED STATES OF THE CIS AND PARTNER/DOE NATIONAL LABORATORIES 2 PROJECT AGREEMENT between THE INTERNATIONAL SCIENCE AND TECHNOLOGY CENTER, (NAME OF RECIPIENT), and (NAME OF PARTNER) The International Science and Technology Center (hereinafter referred to as "Center"), _____________ (name of Institute in the Russian Federation or other interested State of the Commonwealth of Independent States or CIS) (hereinafter referred to as "Recipient") and _______________ (name of Partner)

112

Manitowoc Foodservice: Order (2012-CE-5309)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Manitowoc Foodservicc, Manitowoc Foodservicc, Respondent Issued: July 20, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 2012-CE-5309 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Manitowoc Foodservice ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have mutually agreed to the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference.

113

Danby Order & Compromise Agreement.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Danby Products, Inc., Danby Products, Inc., Respondent Issued: August 9, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2012-CE-1415 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Danby Products, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance cetiification requirements located at I 0 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

114

International Refrigeration: Order (2012-CE-1510)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WASHINGTON, D.C. 20585 WASHINGTON, D.C. 20585 Case Number: 2012-CE-1510 International Refrigeration Products, Respondent ) ) ) ) ) ) ORDER Issued: July 20, 2012 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and International Refrigeration Products ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.P.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

115

Royal Centurion: Order (2012-CE-3608)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Royal Centurion, Inc. Royal Centurion, Inc. Respondent Issued: October 2, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2012-CE-3608 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into by the U.S. Department of Energy ("DOE") and Royal Centurion, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

116

Goodman Manufacturing: Order (2012-CE-1509)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Company, Company, L.P., Respondent Issued: August 7, 2012 ) ) ) ) ) ) ORDER Case Number: 2012-CE-1509 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Goodman Manufacturing Company, L.P. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts

117

Microsoft Word - ATTACHMENT A Suppl 5.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ATTACHMENT A: ATTACHMENT A: Modeling in Support of Additional Two-Unit Operating Configurations Unit 1 & Unit 2 Operation - SO2 Table Mirant Potomac, Alexandria, Virginia Maximum Impacts Predicted by AERMOD-PRIME Compliance Based on Highest, Second-Highest Short-term and Highest Annual Concentrations Units 1 & 2 on 24 hrs/day @ Max load SO2 = 0.31 lb/MBtu for both units. AERMOD- PRIME Monitored Background AERMOD-PRIME + Background NAAQS Distance Direction Ground Elevation Flagpole Elevation X (m) Y (m) m deg m m 3-hour 608 238.4 847 1300 322770.8 4298791.5 182.7 349 6.1 39.6 24-hour 330 27.0 357 365 322880.8 4298542.5 102.7 133 6.7 0.0 Annual* 31 15.7 47 80 322880.8 4298542.5 102.7 133 6.7 0.0 3-hour 651 238.4 889 1300 322770.8 4298791.5 182.7 349 6.1 39.6 24-hour 327 27.0 354 365 322880.8 4298542.5 102.7 133 6.7

118

Competition Advocates and Task-Order and Delivery Order Ombudsman |  

National Nuclear Security Administration (NNSA)

Competition Advocates and Task-Order and Delivery Order Ombudsman | Competition Advocates and Task-Order and Delivery Order Ombudsman | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Competition Advocates and Task-Order and Delivery Order Ombudsman Home > About Us > Our Operations > Acquisition and Project Management > Office of Acquisition Management (OAM) > Competition Advocates and

119

Predicting Envelope Leakage in Attached Dwellings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Predicting Envelope Leakage in Predicting Envelope Leakage in Attached Dwellings Dianne Griffiths April 30, 2013 Presentation Outline * Objectives * What we accomplished last year * What we plan to do this year Why do we do blower door testing? * Compliance to some standard * Identify opportunity for reducing energy use * Identify opportunity for improving IAQ * Measure implementation verification Total (or Solo) Leakage Test P = 50 Pa P = 50 Pa P = 50 Pa P = 50 Pa Open windows, open doors, same test pressure across whole envelope. If pressure across envelope at any point is different from test pressure by less than 5 Pa, not neccessary. "Fully" Guarded Test P = 0 Pa P = 0 Pa P = 50 Pa P = 0 Pa Isolates exterior leakage What's the big deal? * How we measure depends on why we're

120

Attachment 11 - DB Washington.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DC030003 01/02/2004 DC3 DE-RQ01-04ME90001 DC030003 01/02/2004 DC3 DE-RQ01-04ME90001 ATTACHMENT 11 Superseded General Decision Number: DC020003 State: District of Columbia Construction Type: Building County: District of Columbia Statewide. BUILDING CONSTRUCTION PROJECTS (Does not include single family homes and apartments up to and including 4 stories) Modification Number Publication Date 0 06/13/2003 1 10/03/2003 2 10/31/2003 3 01/02/2004 ASBE0024-001 03/01/2003 Rates Fringes Asbestos Worker/Heat and Frost Insulator Includes application of all insulating materials, protective coverings, coatings and

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Attachment 13 - DB Oregon.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OR030001 02/13/2004 OR1 DE-RQ01-04ME90001 OR030001 02/13/2004 OR1 DE-RQ01-04ME90001 ATTACHMENT 13 Superseded General Decision Number: OR020001 State: Oregon Construction Types: Building Counties: Baker, Benton, Clackamas, Clatsop, Columbia, Crook, Deschutes, Gilliam, Grant, Harney, Hood River, Jackson, Jefferson, Klamath, Lake, Lane, Lincoln, Linn, Malheur, Marion, Morrow, Multnomah, Polk, Sherman, Tillamook, Umatilla, Union, Wallowa, Wasco, Washington, Wheeler and Yamhill Counties in Oregon. BUILDING CONSTRUCTION PROJECTS (does not include residential construction consisting of single family homes and apartments up to and including 4 stories) Modification Number Publication Date 0 06/13/2003 1 02/06/2004

122

Attachment FY2011-55 OPAM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, Summary of Small Business 1, Summary of Small Business Administration and Department of Energy Partnership Agreement Reference: FAR 19.8 Overview Recently, the Secretary and the Administrator of the Small Business Administration (SBA) executed a Partnership Agreement to expedite the award of requirements pursuant to section 8(a) of the Small Business Act. It will remain in effect through September 30, 2012. A copy is attached. This section discusses the effects of that Partnership Agreement on the way Department of Energy (DOE) contracting officers process awards under the 8(a) Program. Background Section 8(a) of the Small Business Act provides for the award of contracts to the SBA and the award of a subcontract to a small disadvantaged businesses accepted into the SBA's 8(a)

123

Vacuum die attach for integrated circuits  

DOE Patents (OSTI)

A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

Schmitt, Edward H. (Livermore, CA); Tuckerman, David B. (Livermore, CA)

1991-01-01T23:59:59.000Z

124

Vacuum die attach for integrated circuits  

DOE Patents (OSTI)

A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

Schmitt, E.H.; Tuckerman, D.B.

1991-09-10T23:59:59.000Z

125

NNSA orders security enhancements  

NLE Websites -- All DOE Office Websites (Extended Search)

orders security enhancements NNSA orders security enhancements Because of this government order, until further notice all vehicles entering government property will be required to...

126

Attachment FY2011-30 OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waiver of Mandatory Use of the Stratetic Integrated Procurement Enterprise System (STRIPES) for Certain Purchase Card Transactions Attachment FY2011-30 OPAM More Documents &...

127

Expert Meeting Report: Cladding Attachment Over Exterior Insulation...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from...

128

Electron Attachment to Pyrimidine and Styrene in SC Ethane  

NLE Websites -- All DOE Office Websites (Extended Search)

attachment to pyrimidine (ka) was time resolved using the short pulse of the Laser-Electron Accelerator Facility (LEAF). The rate constant, ka, is large and nearly...

129

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

NWP subcontractor personnel work at a number of DOE generator sites where NWP has no direct contractual authority for overall site operations. NWP has therefore negotiated...

130

Lumiram Electric: Order (2010-CE-1014)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lumiram Electric Corporation, Lumiram Electric Corporation, Respondent Issued : November 23, 2010 By the General Counsel, U.S. Department of Energy: Case Number: 2010-CE-1014 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Lumiram Electric Corporation ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.F.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter . A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me, I find that the public interest would be served by adopting the

131

DOE Order on Quality Assurance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INITIATED BY: INITIATED BY: www.directives.doe.gov Office of Health, Safety and Security U.S. Department of Energy ORDER Washington, D.C. Approved: 4-25-2011 SUBJECT: QUALITY ASSURANCE 1. PURPOSE. a. To ensure that Department of Energy (DOE), including National Nuclear Security Administration (NNSA), products and services meet or exceed customers' requirements and expectations. b. To achieve quality for all work based upon the following principles: (1) All work, as defined in this Order, is conducted through an integrated and effective management system; (2) Management support for planning, organization, resources, direction, and control is essential to quality assurance (QA); (3) Performance and quality improvement require thorough, rigorous

132

Electron attachment fo halocarbons of interest in gaseous dielectrics  

Science Conference Proceedings (OSTI)

Total electron attachment rate constants and cross sections for halomethane and haloethane (freon) compounds are summarized and new results are reported for haloethylenes. The relationship between the electron attachment cross section and the breakdown strength of dielectric gases reported earlier is further discussed.

McCorkle, D.L.; Christodoulides, A.A.; Christophorou, L.G.

1984-01-01T23:59:59.000Z

133

HSS Focus Group Training Work Group Meeting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS Focus Group Training Work Group Meeting HSS Focus Group Training Work Group Meeting HSS Focus Group Training Work Group Meeting Meeting Dates: July 10 - 11 The Department of Energy (DOE) Office of Health, Safety and Security (HSS) Focus Group Training Work Group met at the DOE National Training Center (NTC) inAlbuquerque, NM on Tuesday, July 10 and Wednesday, July 11, 2012. The meeting was chaired by the Work Group co-chairs, Karen Boardman (HSS/NTC),Pete Stafford (AFL-CIO BCTD/CPWR), and Julie Johnston (EFCOG). Attachment 1 is the Meeting Agenda; Attachment 2 is a list of meeting attendees; and Attachment3 is the proposed Radworker Training Reciprocity Program. Meeting Agenda Meeting Summary Draft RAD Worker Training Reciprocity Program for Work Group v.1 Draft Radiation Worker Portability Validation

134

HSS Focus Group Training Work Group Meeting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Meeting Training Work Group Meeting HSS Focus Group Training Work Group Meeting Meeting Dates: July 10 - 11 The Department of Energy (DOE) Office of Health, Safety and Security (HSS) Focus Group Training Work Group met at the DOE National Training Center (NTC) inAlbuquerque, NM on Tuesday, July 10 and Wednesday, July 11, 2012. The meeting was chaired by the Work Group co-chairs, Karen Boardman (HSS/NTC),Pete Stafford (AFL-CIO BCTD/CPWR), and Julie Johnston (EFCOG). Attachment 1 is the Meeting Agenda; Attachment 2 is a list of meeting attendees; and Attachment3 is the proposed Radworker Training Reciprocity Program. Meeting Agenda Meeting Summary Draft RAD Worker Training Reciprocity Program for Work Group v.1 Draft Radiation Worker Portability Validation Meeting Attendees

135

Work Manager  

Science Conference Proceedings (OSTI)

A real-time control system has been developed and deployed nationally to support BTs work management programme. This paper traces the history, system architecture, development, deployment and service aspects of this very large programme. Many ...

G. J. Garwood

1997-01-01T23:59:59.000Z

136

Orders of Magnitude: Three Works for Instruments and Electronics  

E-Print Network (OSTI)

m b pizz. rall. brass glockenspiel mallet rall.J T s.p. spicc. I J p F brass mallets m Crot. B1o o m T t n m . Crot. brass mallet p y > . y T j y > .

Einbond, Aaron Michael

2009-01-01T23:59:59.000Z

137

Attachment 1, Research Performance Progress Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

work with a mentor. "Professional development" activities work with a mentor. "Professional development" activities result in increased knowledge or skill in one's area of expertise and may include workshops, conferences, seminars, study groups, and individual study. Include participation in conferences, workshops, and seminars not listed under major activities. How have the results been disseminated to communities of interest? Describe how the results have been disseminated to communities of interest. Include any outreach activities that have been undertaken to reach members of communities who are not usually aware of these research activities, for the purpose of enhancing public understanding and

138

Passive solar heating of building with attached greenhouse. Final report, August 31, 1979-August 30, 1980  

DOE Green Energy (OSTI)

Research has been conducted on the attached-greenhouse type of passive solar heating system in the north-central region. The thermal performance of attached-greenhouse buildings was analyzed in order to determine the component sizes and configurations which optimize performance. The analytical method is dynamic computer simulation using a thermal network model and actual hourly meteorological and solar radiation data from the north-central region. The project has consisted of a large number of computer simulation runs and resulting performance estimates for certain designs. Conclusions on design guidelines emerge from the results. The overall result of the project is the development of specific design guidelines useful to architects and builders.

Jones, R W

1980-08-01T23:59:59.000Z

139

Passive solar heating of buildings with attached greenhouse. Progress report, November 30, 1979-February 28, 1980  

SciTech Connect

Research is being conducted on the attached-greenhouse type of passive solar heating system in the north-central region. The thermal performance of attached-greenhouse buildings is being analyzed in order to determine the component sizes and configurations which optimize performance. The analytical method is dynamic computer simulation using a thermal network model and actual hourly meteorological and solar radiation data from the north-central region. Progress has consisted of a large number of computer simulation runs resulting in performance estimates for certain designs. Preliminary conclusions on design guidelines are suggested by the results. The overall aim of the project is the development of specific design guidelines useful to architects and builders.

Jones, R.W.

1980-02-01T23:59:59.000Z

140

Polymers with increased order  

DOE Patents (OSTI)

The invention features polymers with increased order, and methods of making them featuring a dense gas.

Sawan, Samuel P. (Tyngsborough, MA); Talhi, Abdelhafid (Rochester, MI); Taylor, Craig M. (Jemez Springs, NM)

1998-08-25T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Microsoft Word - Attachment L-4, Corporate Experience Matrix _Amendment 3_ Ex for website.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-RP52-08NA28091 DE-RP52-08NA28091 Attachment L-4 April 29, 2008 [Submit in Volume II, TAB 3] EXAMPLE CORPORATE EXPERIENCE MATRIX Offeror/Team Member: XYZ Company Proposed Role in Accomplishing ECRS PWS: Lead for Soils Sub-Project and Project Controls Performance Work Statement (PWS) Areas (2) Identify Client/ Contract # Below (1): Soils Sub- Project (3.1.2.1) UGTA Sub- Project (3.1.2.2.) Industrial Sites Sub- Project (3.1.2.3) Project Controls (3.2.1) Other Program Support (3.2.2 - 3.2.6) Public Involvement Activities (3.2.7) NNSA/ DE-AC52- 07NAxxxxx P P Can-Do Company/xx xxxxxxx S2 S2 EPA/ xxxxxxx P Instructions: (1) Insert the name of the client and contract number from the Corporate Experience & Self-Assessment Form (Attachment L-3).

142

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Effective Date: 11/05/13 WP 12-IS.01-6 Revision 10 Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls Cognizant Section: Industrial Safety/Industrial Hygiene Approved By: Tom Ferguson Working Copy Industrial Safety Program - Visitor, Vendor, User, Tenant, and Subcontractor Safety Controls WP 12-IS.01-6, Rev. 10 2 TABLE OF CONTENTS CHANGE HISTORY SUMMARY ..................................................................................... 7 ACRONYMS AND ABBREVIATIONS ............................................................................. 8 1.0 INTRODUCTION 1 ............................................................................................... 10 2.0 VISITORS ........................................................................................................... 11

143

Working Copy  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE/WIPP-99-2286 Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan Revision 7 U.S. Department of Energy December 2013 This document supersedes DOE/WIPP-99-2286, Rev. 6. Working Copy Waste Isolation Pilot Plant Environmental Notification or Reporting Implementation Plan DOE/WIPP-99-2286, Rev. 7 2 TABLE OF CONTENTSCHANGE HISTORY SUMMARY .............................................. 3 ACRONYMS AND ABBREVIATIONS ............................................................................ 4 1.0 INTRODUCTION .................................................................................................. 6 2.0 NOTIFICATION OR REPORTING REQUIREMENTS AND COMMITMENTS ..... 7

144

Attachment F: Summary Checklist of Model AIP Provisions and Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

F: Summary Checklist of Model AIP Provisions and Program F: Summary Checklist of Model AIP Provisions and Program Policies Attachment F: Summary Checklist of Model AIP Provisions and Program Policies Summary Checklist of Model AIP Provisions and Program Policies In response to concerns expressed by DOE and State AIP program representatives, the Office of Environmental Activities has developed a list of mandatory and non-mandatory model language provisions for new and renegotiated AIPs. The underlying concepts for the mandatory provisions are set forth in Attachment A. Other program policies are set forth in a question and answer format in Attachment B. The texts of the optional provisions and mandatory provisions that may be applicable are provided in Attachments C and D respectively. Suggested language related to emergency

145

Property:NEPA ApplicationAttachments | Open Energy Information  

Open Energy Info (EERE)

ApplicationAttachments ApplicationAttachments Jump to: navigation, search Property Name NEPA ApplicationAttachments Property Type Page Description FONSI files for NEPA Docs. For example: Cover letters, Plan of Operations, Maps. This is a property of type Page. It links to pages that use the form NEPA_Doc. Pages using the property "NEPA ApplicationAttachments" Showing 25 pages using this property. (previous 25) (next 25) D DOI-BLM-NV-C010-2009-0030-CX + 87401 - Proposed Action.pdf +, 87402 - Proposed Action.pdf +, 87400 - Proposed Action.pdf +, ... DOI-BLM-NV-C010-2010-0008-CX + 88211 - Proposed Action.pdf + DOI-BLM-NV-C010-2011-0514-EA + Figure 1 Project Location 032111.pdf +, Figure 2 Project Boundary Leases and Land Status 032111.pdf +, Figure 3 Proposed Disturbance 060211.pdf +, ...

146

Expert Meeting Report: Cladding Attachment Over Exterior Insulation |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cladding Attachment Over Exterior Insulation Cladding Attachment Over Exterior Insulation Expert Meeting Report: Cladding Attachment Over Exterior Insulation The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1.

147

Bicycle-powered attachments : designing for developing countries  

E-Print Network (OSTI)

There are 550 million smallholder farmers around the world who earn less than $1/day who could benefit from pedal-powered attachments. This project discusses factors to consider in designing for developing countries and ...

Wu, Jodie (Jodie Z.)

2009-01-01T23:59:59.000Z

148

Electron attachment to chlorine azide at 298 and 400 K  

Science Conference Proceedings (OSTI)

Electron attachment to chlorine azide (ClN{sub 3}) was studied using a flowing-afterglow Langmuir-probe apparatus. Electron attachment rates were measured to be 3.5x10{sup -8} and 4.5x10{sup -8} cm{sup 3} s{sup -1} at 298 and 400 K, respectively, with an estimated 35% absolute accuracy. Cl{sup -} was the sole ion product of the attachment reaction; weak ion signals were observed for other anions and attributed to impurities and secondary ion-molecule reactions. Assuming a relative uncertainty of {+-}10% for these data, an activation energy for the attachment reaction may be given as 24{+-}10 meV.

Freel, Keith; Friedman, Jeffrey F.; Miller, Thomas M.; Viggiano, A. A. [Space Vehicles Directorate, Air Force Research Laboratory, 29 Randolph Road, Hanscom Air Force Base, Massachusetts 01731-3010 (United States); Heaven, Michael C. [Department of Chemistry, Emory University, Atlanta, Georgia 30322 (United States)

2010-04-07T23:59:59.000Z

149

Performance estimates for attached-sunspace passive solar heated buildings  

SciTech Connect

Performance predictions have been made for attached-sunspace types of passively solar heated buildings. The predictions are based on hour-by-hour computer simulations using computer models developed in the framework of PASOLE, the Los Alamos Scientific Laboratory (LASL) passive solar energy simulation program. The models have been validated by detailed comparison with actual hourly temperature measurements taken in attached-sunspace test rooms at LASL.

McFarland, R.D.; Jones, R.W.

1980-01-01T23:59:59.000Z

150

Policy_Flash_2011-59__Attachment.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

011-59Attachment.pdf PolicyFlash2011-59Attachment.pdf More Documents & Publications PartnershipAgreementsTraining&0; Attachment FY2011-28 OPAM OPAM Policy Acquisition Guides...

151

Attachment 4 Volume III Pricing Matrix for Phase-in Period.xls...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment 4 Volume III Pricing Matrix for Phase-in Period.xls&0; Attachment 4 Volume III Pricing Matrix for Phase-in Period.xls&0; Attachment 4 Volume III Pricing Matrix for...

152

Work Address:  

NLE Websites -- All DOE Office Websites (Extended Search)

BO SAULSBURY BO SAULSBURY Work Address: Home Address: Oak Ridge National Laboratory 12952 Buckley Road National Transportation Research Center Knoxville, TN 37934 Building NTRC-2, Room 118 (865) 288-0750 Oak Ridge, TN 37831-6479 (865) 574-4694 saulsburyjw@ornl.gov Technical Specialties: Land use planning Environmental and socioeconomic impact assessment National Environmental Policy Act (NEPA) project management Vehicle fuel economy Education: 1986 B. A., History (minors in English and Business), The University of Tennessee 1989 M. S., Planning, The University of Tennessee (Thesis title: Land Use Compatibility Planning for Airfield Environs: Intergovernmental Cooperation to Protect Land Users From the Effects of Aircraft Operations)

153

Compliance Order on Consent  

NLE Websites -- All DOE Office Websites (Extended Search)

Laws » Laws » Compliance Order on Consent Compliance Order on Consent The Compliance Order on Consent provides the requirements for environmental cleanup of hazardous constituents for LANL. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email What is the Compliance Order on Consent? The Compliance Order on Consent between the State of New Mexico Environment Department and the United States Department of Energy and Los Alamos National Laboratory provides for specified compliance requirements for all of the solid waste management units, areas of concern, canyons, and watershed aggregates included in the Order. Compliance Order on Consent documents LANL documents submitted under the Compliance Order on Consent are

154

First-order inflation  

SciTech Connect

In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result in inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. 58 refs., 3 figs.

Kolb, E.W. (Fermi National Accelerator Lab., Batavia, IL (USA) Chicago Univ., IL (USA). Enrico Fermi Inst.)

1990-09-01T23:59:59.000Z

155

Problem 2-Lexicographic Order  

E-Print Network (OSTI)

Problem: For complex numbers z = a + bi ? C and w = c + di ? C define z ? w if either a ordering of C. (Question I) Prove that this turns C into and ordered set. (Question II) Is this an ordered field? (no) (Question III) Does it have the least-upper-bound property? (no) We will first review the definitions of order and ordered set from Rudin [R]. We will then show that under the lexicographic ordering C is an ordered set. Definition 1. Let S be a set. An order on S is a relation, denoted by ?, with the following two properties: (i) If x ? S and y ? S then one and only one of the statements is true. x ? y, x = y, y ? x (ii) If x, y, z ? S, if x ? y and y ? z, then x ? z.

Jacob Bower

2008-01-01T23:59:59.000Z

156

Evaluation of the impact of solder die attach versus epoxy die attach in a state of the art power package  

E-Print Network (OSTI)

Subject of this paper is the thermal investigation of epoxy (EDA) and solder (SDA) die attaches by a comparison of an ASIC with multiple heat sources in different package assemblies. Static and transient thermal measurements and simulations were performed to investigate the thermal behavior of two samples in a state of the art QFP power package differing only in the die attach material (EDA and SDA).

J. Czernohorsky; B. Maj; Matthias Viering; L. Wright; G. Balanon

2008-01-07T23:59:59.000Z

157

Attachment A: Modeling in Support of Additional Two-Unit Operating...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No....

158

The Effect of Ag and Ag+N Ion Implantation on Cell Attachment Properties  

Science Conference Proceedings (OSTI)

Implanted biomedical prosthetic devices are intended to perform safely, reliably and effectively in the human body thus the materials used for orthopedic devices should have good biocompatibility. Ultra High Molecular Weight Poly Ethylene (UHMWPE) has been commonly used for total hip joint replacement because of its very good properties. In this work, UHMWPE samples were Ag and Ag+N ion implanted by using the Metal-Vapor Vacuum Arc (MEVVA) ion implantation technique. Samples were implanted with a fluency of 1017 ion/cm2 and extraction voltage of 30 kV. Rutherford Backscattering Spectrometry (RBS) was used for surface studies. RBS showed the presence of Ag and N on the surface. Cell attachment properties investigated with model cell lines (L929 mouse fibroblasts) to demonstrate that the effect of Ag and Ag+N ion implantation can favorably influence the surface of UHMWPE for biomedical applications. Scanning electron microscopy (SEM) was used to demonstrate the cell attachment on the surface. Study has shown that Ag+N ion implantation represents more effective cell attachment properties on the UHMWPE surfaces.

Urkac, Emel Sokullu; Oztarhan, Ahmet; Gurhan, Ismet Deliloglu; Iz, Sultan Gulce [Bioengineering Department, Ege University, Bornova, Izmir 35100 (Turkey); Tihminlioglu, Funda [Chemical Engineering Department, Izmir Institute of High Technology, Gulbahcekoyu Urla, Izmir (Turkey); Oks, Efim; Nikolaev, Alexey [High Current Electrnonics, Institute , Tomsk (Russian Federation); Ila, Daryush [Center for Irradiation of Materials, Alabama A and M University, Normal, Huntsville AL 35762 (United States)

2009-03-10T23:59:59.000Z

159

GE_Order_and_Compromise_Agreement.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GE Appliances, a Division of GE Appliances, a Division of General Electric Company, Respondent ) ) ) ) ) ) ORDER By the General Counsel, U.S. Department of Energy: Case Number: 2012-SE-1403 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and GE Appliances, a Division of General Electric Company ("Respondent"). The Compromise Agreement resolves the case initiated after DOE was informed, based on test results made available as a result of verification testing by the Association of Home Appliance Manufacturers ("AHAM"), that aGE refrigerator basic model may not meet the energy conservation standard set forth in 10 C.F.R. § 430.32(a). 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that

160

Electron attachment to halocarbons of environmental interest: Chloroethanes  

SciTech Connect

Electron attachment to the chlorofluoroethanes 1,1-C/sub 2/Cl/sub 2/F/sub 4/, 1,2-C/sub 2/Cl/sub 2/F/sub 4/, 1,1,1-C/sub 2/Cl/sub 3/F/sub 3/, and 1,1,2-C/sub 2/Cl/sub 3/F/sub 3/ was investigated in dilute mixtures with nitrogen and argon using the electron swarm method. The 1,1,1-C/sub 2/Cl/sub 3/F/sub 3/ molecule has a very large electron attachment rate constant at thermal energy (2.8 x 10/sup -7/ cm/sup 3/ s/sup -1/); the rate constant for this molecule decreases monotonically with increasing electron energy above thermal. The other chlorofluoroethanes investigated attach electrons less strongly and show maxima in the rate constant vs mean electron energy at approx.0.5 eV. For all four compounds, the measured rate constants are due primarily to dissociative electron attachment producing Cl/sup -/. Electron attachment cross sections were determined for these halocarbons which showed the existence of several negative ion states below approx.2 eV. Additionally, the temperature dependence of electron attachment to 1,1-C/sub 2/Cl/sub 2/H/sub 4/ was investigated from 323--473 K. The measured rate constants and unfolded cross sections indicated electron attachment to a repulsive negative ion state from the v = 0 and v = 1 levels of the neutral molecule.

McCorkle, D.L.; Szamrej, I.; Christophorou, L.G.

1982-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

CRADA Order Revision  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CRADA Order Revision CRADA Order Revision Linda Field Patent Counsel Department of Energy Goal CRADA Order DOE O 483.1 CRADA Manual DOE M 483.1-1 CRADA Order DOE O XXXX.X Departmental Directive Program Types of Directives Policies Regulations Orders Notices Manuals Guides Technical Standards Departmental Directive Program Directives Life Cycle Development Coordination Implementation Review (Certification) Development Phase *Orders are uploaded to RevCom for review and comment by all affected parties *60 days to develop draft & submit to MA-90 *Solicits input from stakeholders ( incl. field, contractors, and/or program counsel) Coordination Phase *MA-90 parses directive & sets due dates for review & comment *HQ Directives Points of Contact (DPCs) *Have 45 days to submit official comments on behalf of their

162

Executive Order 13329  

Science Conference Proceedings (OSTI)

... in this order shall be construed to impair or otherwise affect the authority of the Director of the Office of Management and Budget with respect to ...

2010-10-05T23:59:59.000Z

163

EXECUTIVE ORDER 13111  

NLE Websites -- All DOE Office Websites (Extended Search)

PM EXECUTIVE ORDER 13111 January 12, 1999 - - - - - - - USING TECHNOLOGY TO IMPROVE TRAINING OPPORTUNITIES FOR FEDERAL GOVERNMENT EMPLOYEES Advances in technology and increased...

164

Order and chaos : articulating support, housing transformation  

E-Print Network (OSTI)

This thesis presents an exploration on the theme of order and chaos, as a formal and social phenomenon, particularly as it relates to housing. The work stems from an attraction to the messy vitality we find in certain ...

Boehm, William Hollister

1990-01-01T23:59:59.000Z

165

Ordering the attributes of query results  

Science Conference Proceedings (OSTI)

There has been a great deal of interest in the past few years on ranking of results of queries on structured databases, including work on probabilistic information retrieval, rank aggregation, and algorithms for merging of ordered lists. In many applications, ...

Gautam Das; Vagelis Hristidis; Nishant Kapoor; S. Sudarshan

2006-06-01T23:59:59.000Z

166

Energy and Hamiltonian in first order gravity  

E-Print Network (OSTI)

In this work the definition of a quasilocal energy for four dimensional first order gravity is developed. Using this an action principle which is adequate for the canonical ensemble is obtained. The microcanonical action principle is obtained as well.

Rodrigo Aros

2005-04-29T23:59:59.000Z

167

Page 1 of 6 Attachment J Information on Compliance with Prevailing  

E-Print Network (OSTI)

. Surveying. Electrical work such as wiring. Carpentry work. Limited inspection activities. Specific Job with DIR. · Are apprentices covered by prevailing wage requirements under California law? An apprentice at the apprentice wage rate on projects involving public works in limited circumstances. More specifically, in order

168

Development of Video Camera for Live Working  

Science Conference Proceedings (OSTI)

This report is an update on the progress in the development of a small lightweight video camera for use in live work. The camera is designed to be attached to the end of an insulating tool, can be placed directly near or at the object to be observed, and can transmit the video (and audio) signal remotely to a receiver. The receiver can be located at the other end of the insulating tool (hotstick) or at any place convenient for the ...

2012-12-21T23:59:59.000Z

169

Attachment D: Mandatory Provisions if Applicable | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D: Mandatory Provisions if Applicable D: Mandatory Provisions if Applicable Attachment D: Mandatory Provisions if Applicable Mandatory Provisions if Applicable This attachment contains provisions that may be mandatory for an AIP if the State: (1) chooses to develop an emergency response program but does not want to use the suggested language in Attachment E; (2) receives DOE grant funding for both AIP and monitoring activities conducted under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA); and (3) if the parties anticipate that a state's sampling activities will generate hazardous waste mixed with radioactive materials. If emergency response activities will be included in a new or renegotiated AIP but the AIP does not incorporate the suggested model provisions related

170

Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nuclear Energy Institute (NEI) Attachment, Integrated Safety Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis This paper addresses why the use of an Integrated Safety Analysis ("ISA") is appropriate for fuel recycling facilities1 which would be licensed under new regulations currently being considered by NRC. The use of the ISA for fuel facilities under Part 70 is described and compared to the use of a Probabilistic Risk Assessment ("PRA") for reactor facilities. A basis is provided for concluding that future recycling facilities - which will possess characteristics similar to today's fuel cycle facilities and distinct from reactors - can best be assessed using established qualitative or semi-quantitative ISA techniques to achieve and

171

Attachment H: Delegation of Authority Memorandum | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment H: Delegation of Authority Memorandum Attachment H: Delegation of Authority Memorandum Attachment H: Delegation of Authority Memorandum United States Department of Energy Memorandum DATE: August 14, 1994 REPLY TO ATTN OF: EM-16 SUBJECT: Delegation of Authority TO: Manager, DOE Operations Offices Manager, Fernald Field Office Manager, Rocky Flats Office Manager, Golden Office On April 21, 1994, a memorandum delegating certain authorities related to financial assistance agreements was sent to you. I am expanding the original delegation to include additional categories of financial assistance to facilitate and streamline the award process. Relevant portions of the original memorandum and modifications are provided below. In accordance with provisions of the Financial Assistance Rules, the Office of Environmental Management (EM) has determined that providing EM funding

172

Second order ambient intelligence  

Science Conference Proceedings (OSTI)

This text attempts to describe an imagined future of ambient intelligence. It assumes that one day most of the current issues within ambient intelligence will be solved and that a second order ambient intelligence will be formulated, one with new research ... Keywords: Critique of ambient intelligence, adaptive systems, animal machine interaction, critical futurism, long-term behavior, second order ambient intelligence, temporal design

Marc Bhlen

2009-01-01T23:59:59.000Z

173

Transparent partial order reduction  

Science Conference Proceedings (OSTI)

Partial Order Reduction (POR) techniques improve the basic model checking algorithm by reducing the numbers of states and transitions explored in verifying a property of the model. In the "ample set" POR framework for the verification of an LTLX ... Keywords: Invisibility, Model checking, Partial order reduction, Transparent, Verification

Stephen F. Siegel

2012-02-01T23:59:59.000Z

174

PolFlash10-31_attach2.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

attach2.pdf PolFlash10-31attach2.pdf PolFlash10-31attach2.pdf More Documents & Publications OPAM Policy Acquisition Guides PolFlash10-31attach1.pdf PolFlash10-31...

175

Microsoft Word - AL2000-05Attachment.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment to Attachment to AL-2000-05 (05/17/00) MODEL PROJECT AGREEMENT FOR PARTNER PROJECTS BETWEEN THE THE SCIENCE AND TECHNOLOGY CENTER IN UKRAINE, INSTITUTIONS IN UKRAINE AND OTHER INTERESTED STATES OF THE CIS PARTNER/DOE NATIONAL LABORATORIES Παγε 1 οφ 49 PROJECT AGREEMENT between THE SCIENCE AND TECHNOLOGY CENTER IN UKRAINE, (NAME OF RECIPIENT), and (NAME OF PARTNER) The Science and Technology Center in Ukraine (hereinafter referred to as "Center"), ______________________ (name of Institute in Ukraine or other interested State of the Commonwealth of Independent States or CIS) (hereinafter referred to as "Recipient") and ______________________ (name of Partner) (hereinafter referred to as "Partner"),

176

Microsoft Word - Policy Flash 2010-73 Attachment 5  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment L-___ Past Performance Information Questionnaire (JUL 2010) Attachment L-___ Past Performance Information Questionnaire (JUL 2010) 4 = Outstanding Performance was substantially and consistently above contract requirements. Contractor displayed an overall superior understanding of contract requirements, and used innovative approaches leading to enhanced performance. 3 = Good Performance was above minimum contract requirements. Contractor displayed a thorough understanding of contract requirements. 2 = Satisfactory Performance met minimum contract requirements. 1 = Marginal Performance was below minimum contract requirements. Contractor displayed a lack of thorough understanding of contract requirements in one or more significant performance areas. 0 = Unsatisfactory Performance completely failed to meet the minimum contract requirements.

177

Apparatus for attaching a cleaning tool to a robotic manipulator  

DOE Patents (OSTI)

This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

Killian, M.A.; Zollinger, W.T.

1991-01-01T23:59:59.000Z

178

Interface structure for hub and mass attachment in flywheel rotors  

DOE Patents (OSTI)

An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

Deteresa, S.J.; Groves, S.E.

1998-06-02T23:59:59.000Z

179

Interface structure for hub and mass attachment in flywheel rotors  

DOE Patents (OSTI)

An interface structure for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45.degree. with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning.

Deteresa, Steven J. (Livermore, CA); Groves, Scott E. (Brentwood, CA)

1998-06-02T23:59:59.000Z

180

Positioning and locking device for fuel pin to grid attachment  

DOE Patents (OSTI)

A positioning and locking device for fuel pin to grid attachment provides an inexpensive means of positively positioning and locking the individual fuel pins which make up the driver fuel assemblies used in nuclear reactors. The device can be adapted for use with a currently used attachment grid assembly design and insures that the pins remain in their proper position throughout the in-reactor life of the assembly. This device also simplifies fuel bundle assembly in that a complete row of fuel pins can be added to the bundle during each step of assembly.

Frick, Thomas M. (Irwin, PA); Wineman, Arthur L. (Greensburg, PA)

1976-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Descriptions of Task Order Schedules and Placement of Pricing Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RFP DE-RP36-06GO96031 RFP DE-RP36-06GO96031 10/11/2007 ATTACHMENT J-5 DESCRIPTIONS OF TASK ORDER SCHEDULES AND PLACEMENT OF PRICING INFORMATION J-5.1 DESCRIPTIONS OF TASK ORDER (TO) SCHEDULES (SCHEDULE TEMPLATES ARE PROVIDED IN ATTACHMENT J-6) J-5.1.1 Schedule TO-1 (Preliminary Assessment - PA) - Proposed Guaranteed Cost Savings and Contractor Payments - Schedule TO-1 (PA) shall be submitted to present the contractor's estimated cost savings, proposed guaranteed cost savings, and contractor payments. TO-1 (PA) values submitted may be in estimated ranges. Based on the preliminary survey and agency discussions, the contractor shall submit a completed Schedule TO-1 (PA) containing: A. Column (a) - Contractor submits proposed estimated cost savings during the implementation period, prior to full project acceptance (see most recent version

182

Descriptions of Task Order Schedules and Placement of Pricing Information  

NLE Websites -- All DOE Office Websites (Extended Search)

RFP DE-RP36-06GO96031 RFP DE-RP36-06GO96031 10/11/2007 ATTACHMENT J-5 DESCRIPTIONS OF TASK ORDER SCHEDULES AND PLACEMENT OF PRICING INFORMATION J-5.1 DESCRIPTIONS OF TASK ORDER (TO) SCHEDULES (SCHEDULE TEMPLATES ARE PROVIDED IN ATTACHMENT J-6) J-5.1.1 Schedule TO-1 (Preliminary Assessment - PA) - Proposed Guaranteed Cost Savings and Contractor Payments - Schedule TO-1 (PA) shall be submitted to present the contractor's estimated cost savings, proposed guaranteed cost savings, and contractor payments. TO-1 (PA) values submitted may be in estimated ranges. Based on the preliminary survey and agency discussions, the contractor shall submit a completed Schedule TO-1 (PA) containing: A. Column (a) - Contractor submits proposed estimated cost savings during the implementation period, prior to full project acceptance (see most recent version

183

ASKO_2012-CE 19 2004_Order_&_CA.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ASKO Appliances, Inc., ASKO Appliances, Inc., Respondent Issued: July 20, 2012 BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2012-CE-19/2004 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and ASKO Appliances, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference.

184

Convexification of Stochastic Ordering  

E-Print Network (OSTI)

It dominates Y in the second order, but it does not belong to conv A(1)(Y) = A(1)(Y ). It follows from this example that the probability space must be sufficiently rich...

185

Surveillance Guide - OPS 9.15 Timely Orders to Operators  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TIMELY ORDERS TO OPERATORS TIMELY ORDERS TO OPERATORS 1.0 Objective The objective of this surveillance is to evaluate the facility program and practices for timely orders to operators. This surveillance provides a basis for evaluating the effectiveness of the contractor's timely orders to operators program and for establishing compliance with DOE requirements. 2.0 References 2.1 DOE 5480.19, Conduct of Operations Requirements for DOE Facilities 2.2 DOE-STD-1034-93, Guide to Good Practices for Timely Orders to Operators 3.0 Requirements Implemented This surveillance is conducted to implement the requirements of DOE 5480.19, Attachment I, Chapter XV. 4.0 Surveillance Activities The Facility Representative reviews the facility index and file of orders to operators and observes operator activities to evaluate

186

Attached-sunspace designs: a nationwide economic appraisal  

DOE Green Energy (OSTI)

Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

Roach, F.; Kirschner, C.

1980-01-01T23:59:59.000Z

187

Designing for emotional attachment to energy James Pierce, Eric Paulos  

E-Print Network (OSTI)

1 Designing for emotional attachment to energy James Pierce, Eric Paulos Human-Computer Interaction a perspective on energy-as-materiality and employing a designerly approach of materializing energy [1]. Building on a framework for approaching energy as materiality, we discuss several design explorations around emotional

Paulos, Eric

188

URS Consent Order  

NLE Websites -- All DOE Office Websites (Extended Search)

action management, quality improvement, and work control programs. The U.S. Department of Energy (DOE) views these programs as vital to protecting workers and the public from the...

189

Remedial action plan for the inactive Uranium Processing Site at Naturita, Colorado. Remedial action plan: Attachment 2, Geology report, Attachment 3, Ground water hydrology report: Working draft  

SciTech Connect

The uranium processing site near Naturita, Colorado, is one of 24 inactive uranium mill sites designated to be cleaned up by the US Department of Energy (DOE) under the Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA), 42 USC {section}7901 et seq. Part of the UMTRCA requires that the US Nuclear Regulatory Commission (NRC) concur with the DOE`s remedial action plan (RAP) and certify that the remedial action conducted at the site complies with the standards promulgated by the US Environmental Protection Agency (EPA). This RAP serves two purposes. First, it describes the activities that are proposed by the DOE to accomplish remediation and long-term stabilization and control of the radioactive materials at the inactive uranium processing site near Naturita, Colorado. Second, this RAP, upon concurrence and execution by the DOE, the state of Colorado, and the NRC, become Appendix B of the cooperative agreement between the DOE and the state of Colorado.

Not Available

1994-09-01T23:59:59.000Z

190

EXECUTIVE ORDER 13514  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ORDER 13514 ORDER 13514 FEDERAL LEADERSHIP IN ENVIRONMENTAL, ENERGY AND ECONOMIC PERFORMANCE FAR and DEAR Implementation and User Aids. 1 Notice a Pattern * Third President in a Row to do this! * Clinton had 5 Greening Orders starting with 13101. * Bush trumped him by putting it all in one, i.e., EO 13423, [Did you know? Congress made this permanent by placing it in a continuing resolution!]. * Obama trumped him by adding Green House Gases and Plug In Hybrids in EO 13514. 2 FAR Case 2010-001 Sustainable Acquisition - What's New * A new 23.002 is established aimed directly at DOE. It repeats E.O. 13423, Section 3(e) requirement that contracts for Contractor operation of a Government facility must contain a clause requiring the Contractor to comply with E.O. 13423 to

191

NSLS Work Planning & Controls  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Planning & Controls NSLS Work Planning and Control Procedure Lead Working Guidelines Information on Working in Areas Subject to Radiation from VUV Injection Procedure for...

192

Attachment C: Optional AIP Provisions | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C: Optional AIP Provisions C: Optional AIP Provisions Attachment C: Optional AIP Provisions Optional AIP Provisions This attachment contains sample language for a number of optional provisions that sites may choose to include or not to include in their AIPs. Optional AIP provisions are not mandatory and the language presented is a sample which may be used as is, serve as a guideline for the creation of a modified provision to suit the site-specific needs of a particular AIP program, or not included in a new or renegotiated AIP. 1. Public Participation/Public Accountability in the DOE Planning Process "The DOE will make available to the public in a timely manner all environmental planning documents that require public comment. The DOE will promptly reply to, and confirm receipt of, requests for information

193

Attachment B: Other AIP Program Policies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B: Other AIP Program Policies B: Other AIP Program Policies Attachment B: Other AIP Program Policies Other AIP Program Policies Question #1: What is the role of local governments in AIP program emergency management planning activities? Answer: As indicated in the suggested model provisions related to emergency response in Attachment E, it is DOE policy that AIP provisions regarding emergency management planning activities encourage active participation by applicable local governments. Question #2: Which AIP provisions should be addressed through the development of site-specific procedures and protocol? Answer: Generally, site-specific procedures and protocols should be developed to address AIP program concerns that must be tailored to site conditions, such as: State generation of hazardous and/or radioactive wastes; on-site

194

Relative Lifetime Prediction for CPV Die-Attach Layers: Preprint  

DOE Green Energy (OSTI)

In concentrating photovoltaics (CPV) cell assemblies, a large-area die-attach layer is subjected to thermal cycles, leading to thermomechanical fatigue. This causes cracking and the eventual failure of the CPV cell by thermal runaway. We define a damage metric representing lumped progress toward failure and present a numerical model for computing the accumulation of damage for arbitrary transient temperature conditions. The model is applied to a particular design with a solder die-attach layer. We show that accelerated-test thermal cycles with higher ramp rates cause more damage, both per cycle and per unit time. Outdoor exposure to one entire year in two geographic locations is also simulated, revealing that a year of exposure in Golden, Colorado is equivalent to 1.4 years of exposure in Oak Ridge, Tennessee.

Silverman, T. J.; Bosco, N.; Kurtz, S.

2012-03-01T23:59:59.000Z

195

End effectors and attachments for buried waste excavation equipment  

SciTech Connect

The Buried Waste Integrated Demonstration (BWID) supports the applied research, development, demonstration, and evaluation of a suite of advanced technologies that form a comprehensive remediation system for the effective and efficient remediation of buried waste. Their efforts are identified and coordinated in support of the U.S. Department of Energy (DOE), Environmental Restoration and Waste Management (ER&WM) Department`s needs and objectives. The present focus of BWID is to support retrieval and ex-situ treatment configuration options. Future activities will explore and support containment, and stabilization efforts in addition to the retrieval/ex situ treatment options. This report presents a literature search on the state-of-the-art in end effectors and attachments in support of excavator of buried transuranic waste. Included in the report are excavator platforms and a discussion of the various attachments. Also included is it list of vendors and specifications.

King, R.H.

1993-09-01T23:59:59.000Z

196

Pin and roller attachment system for ceramic blades  

DOE Patents (OSTI)

In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

Shaffer, J.E.

1995-07-25T23:59:59.000Z

197

Stress Indices for Straight Pipe with Trunnion Attachments  

Science Conference Proceedings (OSTI)

This report provides equations based on experimental and test data for determining B and C stress indices and the flexibility factor, k, for straight pipe with trunnions (or hollow circular cross-section welded attachments). The report contains explicit modifications to ASME Code Cases 391 and 392 for qualification of trunnions on pipe. It also provides flexibility equations for a more accurate evaluation of these configurations.

1998-11-10T23:59:59.000Z

198

Removable, hermetically-sealing, filter attachment system for hostile environments  

DOE Patents (OSTI)

A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

Mayfield, Glenn L. (Richland, WA)

1983-01-01T23:59:59.000Z

199

Pin and roller attachment system for ceramic blades  

DOE Patents (OSTI)

In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

Shaffer, James E. (Maitland, FL)

1995-01-01T23:59:59.000Z

200

LWX-0014 Supplemental Order  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 4 DECISION AND ORDER OF THE DEPARTMENT OF ENERGY Supplemental Order Name of Petitioner: Ronald A. Sorri Date of Filing: September 26, 1994 Case Number: LWX-0014 This Decision supplements an Initial Agency Decision, dated December 16, 1993, issued by the undersigned Hearing Officer of the Office of Hearings and Appeals (OHA) of the Department of Energy in a case involving a "whistleblower" complaint filed by Ronald A. Sorri (Sorri) under the Department of Energy's Contractor Employee Protection Program, 10 C.F.R. Part 708. See Ronald A. Sorri, 23 DOE & 87,503 (1993) (Sorri). In the December 16 Decision, I found that Sorri had proven by a preponderance of the evidence that he engaged in activities protected under Part 708 and that these activities were a contributing

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Low-resistivity photon-transparent window attached to photo-sensitive silicon detector  

DOE Patents (OSTI)

The invention comprises a combination of a low resistivity, or electrically conducting, silicon layer that is transparent to long or short wavelength photons and is attached to the backside of a photon-sensitive layer of silicon, such as a silicon wafer or chip. The window is applied to photon sensitive silicon devices such as photodiodes, charge-coupled devices, active pixel sensors, low-energy x-ray sensors and other radiation detectors. The silicon window is applied to the back side of a photosensitive silicon wafer or chip so that photons can illuminate the device from the backside without interference from the circuit printed on the frontside. A voltage sufficient to fully deplete the high-resistivity photosensitive silicon volume of charge carriers is applied between the low-resistivity back window and the front, patterned, side of the device. This allows photon-induced charge created at the backside to reach the front side of the device and to be processed by any circuitry attached to the front side. Using the inventive combination, the photon sensitive silicon layer does not need to be thinned beyond standard fabrication methods in order to achieve full charge-depletion in the silicon volume. In one embodiment, the inventive backside window is applied to high resistivity silicon to allow backside illumination while maintaining charge isolation in CCD pixels.

Holland, Stephen Edward (Hercules, CA)

2000-02-15T23:59:59.000Z

202

Submitted Work & Work in Preparation - CECM  

E-Print Network (OSTI)

May 23, 2001 ... Submitted Work & Work in Preparation. I. G. Lisle and G. J. Reid, Symmetry Classification Using Invariant Moving Frames, to be submitted.

203

The role of attachment style in building social capital from a social networking site: The interplay of anxiety and avoidance  

Science Conference Proceedings (OSTI)

Drawing on attachment theory, the present study examines the attachment styles of individuals relative to two ways of building social capital - bonding social capital and bridging social capital. In trying to relate attachment theory to the use of SNS, ... Keywords: Attachment style, Attachment theory, Social capital, Social networking site (SNS)

Doo Young Lee

2013-07-01T23:59:59.000Z

204

Policy_Flash_2011-62__Attachment.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

sh2011-62Attachment.pdf PolicyFlash2011-62Attachment.pdf More Documents & Publications PolicyFlash2011-62.pdf OPAM Policy Acquisition Guides Microsoft Word - AL2006-07.doc...

205

AttachmentFlash2011-2 -(2)-OPAM | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

-(2)-OPAM AttachmentFlash2011-2 -(2)-OPAM REQUESTS BY POLITICAL CANDIDATES TO TOUR DOE FACILITIES AttachmentFlash2011-2 -(2)-OPAM More Documents & Publications...

206

Attachment to Modification M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620  

NLE Websites -- All DOE Office Websites (Extended Search)

M067 M067 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (6-24-04).doc J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES June 24, 2004 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of Directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have been incorporated into this Appendix using a DOE-approved tailored process, Contractor-prepared document entitled "Management Integration & Controls Document" (MIC), which is BWXT's Integrated Safety Management System Description.

207

Attachment to Modification M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620  

National Nuclear Security Administration (NNSA)

M125 M125 BWXT Pantex, LLC Contract No. DE-AC04-00AL66620 PX-SEC-J (01/16/07) J-App. E-1 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J - LIST OF ATTACHMENTS APPENDIX E - LIST OF APPLICABLE DIRECTIVES January 16, 2007 Pursuant to the contract clause entitled "Laws, Regulations, and DOE Directives," the following list of directives is applicable to this contract. Environmental, Safety, and Health (ES&H) requirements for work conducted under this contract have been incorporated into this Appendix using a DOE-approved tailored process, Contractor-prepared document entitled "Management Integration & Controls Document" (MIC), which is BWXT's Integrated Safety Management System Description Requirements.

208

Accelerated Testing and On-Sun Failure of CPV Die-Attach (Presentation)  

SciTech Connect

Accelerated Testing and On-Sun Failure of CPV Die-attach. Presentation on CPV accelerated reliability testing.

Bosco, N.; Kurtz, S.; Stokes, A.

2010-10-01T23:59:59.000Z

209

C:\Eco-SSLs\Final Guidance November 2003\Attachments\Attachment 1-2 Microbial Processes\Final Eco-SSL Guidance Attachment 1-2.w  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 Guidance for Developing Ecological Soil Screening Levels (Eco-SSLs) Assessment of Whether to Develop Ecological Soil Screening Levels for Microbes and Microbial Processes OSWER Directive 92857-55 November 2003 This page left intentionally blank Guidance for Developing Eco-SSLs Attachment 1-2 November 2003 1 Assessment of Whether to Develop Ecological Soil Screening Levels for Microbes and Microbial Processes Executive Summary Bacteria and fungi (i.e., microbes) are essential components of soil systems and the importance of microbial processes in terrestrial systems is well recognized. The Eco-SSL workgroup had lengthy discussions as to the merits of deriving microbial Eco-SSLs, and the potential significance of either having or not having Eco-SSLs for microbes in this guidance. As an

210

C:\Eco-SSLs\Final Guidance November 2003\Attachments\Attachment 4-4\Final Eco-SSL Attachment 4-4.wpd  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Guidance for Developing Ecological Soil Screening Levels (Eco-SSLs) Eco-SSL Standard Operating Procedure (SOP) # 5: Wildlife TRV Data Evaluation OSWER Directive 92857-55 November 2003 This page intentionally left blank Attachment 4-4 Standard Operating Procedure (SOP) #5: Wildlife Toxicity Reference Value Data Evaluation for Ecological Soil Screening Levels (Eco-SSLs) OSWER Directive 92857-55 November 2003 Prepared for USEPA Region 8 by Syracuse Research Corporation 999 18th Street, Suite 1975 North Tower Denver, CO 80202 TABLE OF CONTENTS 1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 PURPOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3.0 THE SCORING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4.0 EVALUATION AND SCORING OF STUDY ATTRIBUTES .

211

Attachment to Modification M067 BWXT Pantex, LLC Contract No...  

National Nuclear Security Administration (NNSA)

M 475.1-1A Identifying Classified Information O 481.1B Work For Others (Non-Department of Energy Funded Work) M 481.1-1 Reimbursable Work For Non-Federal Sponsors Process Manual N...

212

The competing roles of SV(O) and VS(O) word orders in Xodenie igumena Daniila  

E-Print Network (OSTI)

work together and word order alone does not determine therelatively free word order, as does Modern Russian. However,

McAnallen, Julia

2009-01-01T23:59:59.000Z

213

Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit Report Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories OAS-L-13-14 September 2013 Department of Energy Washington, DC 20585 September 25, 2013 MEMORANDUM FOR THE MANAGER, SANDIA FIELD OFFICE FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Fiscal Year 2011 Work Performed Under the Work for Others Program at Sandia National Laboratories" BACKGROUND The attached report presents the results of the audit of Sandia National Laboratories' (Sandia) Fiscal Year (FY) 2011 Work for Others (WFO) Program. The Office of Inspector General contracted with an independent certified public accounting firm, KPMG, LLP (KPMG), to assess

214

DECISION AND ORDER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2004 , 2004 DECISION AND ORDER OF THE DEPARTMENT OF ENERGY Decision of the Director Name of Petitioner: Charles L. Evans Date of Filing: May 17, 2004 Case Number: TBU-0026 Charles Evans, a former employee of Fluor Hanford Inc. (Fluor), a Department of Energy (DOE) contractor, appeals the DOE Richland Operations Office=s (Richland) dismissal of the whistleblower complaint he filed against Fluor under 10 C.F.R. Part 708, the DOE Contractor Employee Protection Program. I. BACKGROUND A. The DOE=s Contractor Employee Protection Program The DOE=s Contractor Employee Protection Program was established to safeguard Apublic and employee health and safety; ensur[e] compliance with applicable laws, rules, and regulations; and prevent[] fraud, mismanagement, waste and abuse@ at DOE=s government-owned, contractor-operated facilities. 57 Fed. Reg.

215

Electron attachment to chlorofluoromethanes using the electron-swarm method  

Science Conference Proceedings (OSTI)

Electron attachment rate constants, as a function of pressure-reduced electric field, were measured in mixtures with nitrogen for CCl/sub 3/F, CCl/sub 2/F/sub 2/, and CClF/sub 3/ using the electron swarm method. From these data total electron attachment cross sections sigma/sub a/(epsilon) as a function of electron energy epsilon were determined for the chlorofluoromethanes using the electron-swarm unfolding technique and a new set of electron energy distribution functions for N/sub 2/. For CCl/sub 3/F and CCl/sub 2/F/sub 2/ three maxima in sigma/sub a/(epsilon) were found at thermal energy, 0.25 and 0.75 eV and at 0.07, 0.30, and 0.93 eV, respectively. Only one pronounced maximum in sigma/sub a/(epsilon) for CClF/sub 3/ was observed at 1.4 eV. The thermal values of the attachment rate constant for CCl/sub 3/F, CCl/sub 2/F/sub 2/, and CClF/sub 3/ are, respectively, 3.90 x 10/sup 8/, 4.00 x 10/sup 7/, and 6.05 x 10/sup 3/ sec/sup -1/ Torr/sup -1/. Additionally, comparisons are made between the sigma/sub a/(epsilon) calculated for these and other molecules using both the new electron energy distribution functions for N/sub 2/ and those determined earlier. Substituent effects on the number and position of negative ion states and on the magnitude of sigma/sub a/(epsilon) for the chlorofluoromethanes are discussed.

McCorkle, D.L.; Christodoulides, A.A.; Christophorou, L.G.; Szamrej, I.

1980-04-01T23:59:59.000Z

216

URS Consent Order  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David A. Pethick David A. Pethick Group General Manager Department of Energy Washington, DC 20585 October 13, 2011 URS Energy & Construction, Inc. Global Management and Operations Services 106 Newberry Street SW Aiken, South Carolina 29801 NC0-20 11-02 Dear Mr. Pethick: The Office of Health, Safety and Security's Office ofEnforcement and Oversight has completed its investigation into the facts and circumstances associated with identified deficiencies in the URS Energy & Construction, Inc. (URS) corrective action management, quality improvement, and work control programs. The U.S. Department of Energy (DOE) views these programs as vital to protecting workers and the public from the radiological hazards associated with the Sodium Bearing Waste Treatment Project (SBWTP) at DOE's Idaho National Laboratory. The

217

Traffic of cytoskeletal motors with disordered attachment rates  

E-Print Network (OSTI)

Motivated by experimental results on the interplay between molecular motors and tau proteins, we extend lattice-based models of intracellular transport to include a second species of particle which locally influences the motor-filament attachment rate. We consider various exactly solvable limits of a stochastic multi-particle model before focusing on the low-motor-density regime. Here, an approximate treatment based on the random walk behaviour of single motors gives good quantitative agreement with simulation results for the tau-dependence of the motor current. Finally, we discuss the possible physiological implications of our results.

H. Grzeschik; R. J. Harris; L. Santen

2008-06-24T23:59:59.000Z

218

Competition Advocates and Task-Order and Delivery Order Ombudsman...  

National Nuclear Security Administration (NNSA)

Delivery Order Ombudsman Home > About Us > Our Operations > Acquisition and Project Management > Office of Acquisition Management (OAM) > Competition Advocates and Task-Order and...

219

Investigation of Jacketed Rope for Live Work  

Science Conference Proceedings (OSTI)

Since the early 1990s, insulating tools have been used for live work (LW). Initially tools were made of wood and had homemade attachments, but fiberglass reinforced plastic (FRP) tools were introduced in late 1950s and replaced essentially all wooden tools. In view of the long time span since the previous major innovation in LW tools, the EPRI advisory task force of the LW project requested that research be performed on new tools, materials, and ropes that could serve as substitutes for some of the ...

2013-12-14T23:59:59.000Z

220

Work Force Retention Work Group Charter  

Energy.gov (U.S. Department of Energy (DOE))

The Work force Retention Work Group is established to support the Departments critical focus on maintaining a high-performing work force at a time when a significant number of the workers needed to support DOEs national security mission are reaching retirement age.

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Live Working Resource Center  

Science Conference Proceedings (OSTI)

This report is a summary of work performed in 2008 on the EPRI Live Working Resource Center (LWRC) web site.

2008-12-16T23:59:59.000Z

222

Attachment1_Overview_Spreadsheet_Aug_2011_final.xlsx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Attachment 1: Overview of Department/Agency NEPA Status as of June 30, 2011 Attachment 1: Overview of Department/Agency NEPA Status as of June 30, 2011 # of ARRA Funded Projects NEPA Does Not Apply Categorical Exclusions (CE) CE Pending CE Done Environmental Assessments (EA) EA Pending EA Done Environmental Impact Statements (EIS) EIS Pending EIS Done All NEPA Actions All Withdrawn Actions All Pending NEPA Actions All Completed NEPA Actions OVERALL TOTALS: 274,757 4,277 183,785 92 183,693 7,171 184 6,987 863 29 834 191,819 1,899 305 191,514 Department of Agriculture (USDA): 184,856 254 96,784 1 96,783 1,498 0 1,498 150 0 150 98,432 395 1 98,431 Agricultural Research Service (ARS) 41 2 38 0 38 1 0 1 0 0 0 39 0 0 39 Farm Service Agency (FSA) 87,487 0 4 0 4 0 0 0 0 0 0 4 0 0 4 Food and Nutrition Service (FNS) 251 0 4 0 4 0 0 0 0 0 0 4

223

Predicting Envelope Leakage in Attached Dwellings (Fact Sheet)  

SciTech Connect

The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached housing, the single blower door test measures leakage to the outside. In attached housing, however, this "solo" test method measures both air leakage to the outside and air leakage between adjacent units through common surfaces. Although minimizing leakage to neighboring units is highly recommended to avoid indoor air quality issues between units, reduce pressure differentials between units, and control stack effect, the energy benefits of air sealing can be significantly overpredicted if the solo air leakage number is used in the energy analysis. Guarded blower door testing is more appropriate for isolating and measuring leakage to the outside in attached housing. This method uses multiple blower doors to depressurize adjacent spaces to the same level as the unit being tested. Maintaining a neutral pressure across common walls, ceilings, and floors acts as a "guard" against air leakage between units. The resulting measured air leakage in the test unit is only air leakage to the outside. Although preferred for assessing energy impacts, the challenges of performing guarded testing can be daunting.

Not Available

2013-11-01T23:59:59.000Z

224

Nevada Test Site Environmental Report 2008 Attachment A: Site Description  

SciTech Connect

This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy A. Wills

2009-09-01T23:59:59.000Z

225

Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)  

Science Conference Proceedings (OSTI)

The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

Not Available

2013-11-01T23:59:59.000Z

226

Recovery Act Investment Accelerates Cleanup Work at DOE's Paducah Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Investment Accelerates Cleanup Work at DOE's Paducah Investment Accelerates Cleanup Work at DOE's Paducah Site Recovery Act Investment Accelerates Cleanup Work at DOE's Paducah Site July 15, 2011 - 12:00pm Addthis UF6 piping deactivation The black inlet hose is attached to a negative air machine that allows Feed Plant cleanup workers to safely deactivate uranium hexafluoride (UF6) piping, seen at right of the lift supporting the crew. UF6 piping deactivation The black inlet hose is attached to a negative air machine that allows Feed Plant cleanup workers to safely deactivate uranium hexafluoride (UF6) piping, seen at right of the lift supporting the crew. Heavy equipment demo Heavy equipment demolishes the last part of the eastern third of the Feed Plant at the Paducah Site. Cleanup continues to prepare the remaining part of the complex, backgroundfor demolition later.

227

Executive Order 13423 Implementing Instructions  

Energy.gov (U.S. Department of Energy (DOE))

INSTRUCTIONS FOR IMPLEMENTING EXECUTIVE ORDER 13423Strengthening Federal Environmental, Energy, and Transportation Management

228

July 10-11, 2012, HSS Focus Group Training Work Group - Meeting Minutes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Training Work Group Meeting Minutes July 10 & 11, 2012 The Department of Energy (DOE) Office of Health, Safety and Security (HSS) Focus Group Training Work Group met at the DOE National Training Center (NTC) in Albuquerque, NM on Tuesday, July 10 and Wednesday, July 11, 2012. The meeting was chaired by the Work Group co-chairs, Karen Boardman (HSS/NTC), Pete Stafford (AFL-CIO BCTD/CPWR), and Julie Johnston (EFCOG). Attachment 1 is the Meeting Agenda; Attachment 2 is a list of meeting attendees; and Attachment 3 is the proposed Radworker Training Reciprocity Program. July 10, 2012 Chronologic Meeting Summary: Following a Co-chair pre-meeting, Karen

229

Attachment G: Guidance on Headquarters Approval of State  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

G: Guidance on Headquarters Approval of State G: Guidance on Headquarters Approval of State Agreements-in-Principle Attachment G: Guidance on Headquarters Approval of State Agreements-in-Principle Guidance on Headquarters Approval of State Agreements-in-Principle Introduction: In December 1993, the Office of Environmental Management (EM) informed states that the Department intended to extend the existing Agreements-in-Principle (AIPs) for another five-year term and would continue to negotiate new AIPs. The purpose of this memorandum is to provide guidance on Headquarters approval of State AIPs in the EM program. This guidance applies to both new and renegotiated AIPs. All Operations and Field Offices are directed to involve appropriate Headquarters organizations early in the negotiations to assure that draft agreements

230

Attachment 7, NETL Assurance, Non-Construction Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

38# 38# (12/1999) OPI=PS10 (Previous Editions Obsolete) Attachment 7 NETL ASSURANCE, NON-CONSTRUCTION PROGRAMS Identify and complete the assurances, representations, and certifications below that are applicable to your project or program. Questions or comments should be addressed to the awarding agency. __ Standard Form 424B# "Assurances - Non-Construction Programs" __ NETL F 4220.35# "Additional Representations and Certifications for Federal Financial Assistance" __ Standard Form LLL # "Disclosure of Lobbying Activities" __ DOE F 1600.5 # "U. S. Department of Energy Assurance of Compliance Nondiscrimination in Federally Assisted Programs, OMB Burden Disclosure" Applicant Certification The Applicant certifies that it has complied, or that, within 90 days of the date of the grant or cooperative agreement, it will comply with

231

Attachment A.1: Summary of Mandatory Language Provisions | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A.1: Summary of Mandatory Language Provisions A.1: Summary of Mandatory Language Provisions Attachment A.1: Summary of Mandatory Language Provisions SUMMARY OF MANDATORY LANGUAGE PROVISIONS 1. Regulatory and non-regulatory activities "The parties to this Agreement further understand that the oversight activities authorized by this Agreement are intended to supplement activities conducted under applicable environmental laws and regulations, but not to support specific State regulatory, permitting, and legally-required environmental oversight activities, such as issuance of regulatory permits, the review of DOE regulatory submissions when such review serves primarily as the basis for State action under regulatory programs, required regulatory inspections, required monitoring, issuance of regulatory notices of violation and other citations, nor to support the

232

Attachment 5 Volume II Pricing Matrix.xls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PRICE MATRIX PRICE MATRIX ATTACHMENT 5 VOLUME II SUMMARY Logistics Services A-76 Study - Service Provider Price Offer for Phase in Period, Volume III. Service Provider Name: GSA Schedule Contract Number: Expiration Date of GSA Schedule Contract: Duration Base Period: 3 Calendar Years SUMMARY FORRESTAL Term of Performance TOTAL PROPOSED COST Phase-in Period 10/01/2004 - 06/30/2004 $ Base Period Year One 07/01/2005 - 06/30/2006 $ Year Two 07/01/2006 - 06/30/2007 $ Period Three 07/01/2007 - 09/30/2007 $ $ Option Period Year One 10/01/2007 - 09/30/2008 $ Period Two 10/01/2008 - 09/30/2009 $ $ SUMMARY GERMANTOWN Term of Performance TOTAL PROPOSED COST Phase-in Period 10/01/2004 - 06/30/2004 $ Base Period Year One

233

EMP Attachment 3 DOE-SC PNNL Site Dose Assessment Guidance  

SciTech Connect

This Dose Assessment Guidance (DAG) describes methods to use to determine the Maximally-Exposed Individual (MEI) location and to estimate dose impact to that individual under the U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest National Laboratory (PNNL) Site Environmental Monitoring Plan (EMP). This guidance applies to public dose from radioactive material releases to the air from PNNL Site operations. This document is an attachment to the Pacific Northwest National Laboratory (PNNL) Environmental Monitoring Plan (EMP) and describes dose assessment guidance for radiological air emissions. The impact of radiological air emissions from the U.S. Department of Energy Office of Science (DOE-SC) PNNL Site is indicated by dose estimates to a maximally exposed member of the public, referred to as the maximally exposed individual (MEI). Reporting requirements associated with dose to members of the public from radiological air emissions are in 40 CFR Part 61.94, WAC 246-247-080, and DOE Order 458.1. The DOE Order and state standards for dose from radioactive air emissions are consistent with U.S. Environmental Protection Agency (EPA) dose standards in 40 CFR 61.92 (i.e., 10 mrem/yr to a MEI). Despite the fact that the current Contract Requirements Document (CRD) for the DOE-SC PNNL Site operations does not include the requirement to meet DOE CRD 458.1, paragraph 2.b, public dose limits, the DOE dose limits would be met when EPA limits are met.

Snyder, Sandra F.

2011-12-21T23:59:59.000Z

234

ORISE: Work for Others  

NLE Websites -- All DOE Office Websites (Extended Search)

Institute for Science Education Work for Others The U.S. Department of Energy's (DOE) Work for Others (WFO) program allows the performance of work for non-DOE entities when the...

235

Public Order and Safety Buildings  

U.S. Energy Information Administration (EIA) Indexed Site

Order and Safety Order and Safety Characteristics by Activity... Public Order and Safety Public order buildings are those used for the preservation of law and order or public safety. Basic Characteristics [ See also: Equipment | Activity Subcategories | Energy Use ] Public Order and Safety Buildings... Volunteer fire stations tend not to be government owned, which probably explains why 33 percent of public order and safety buildings were not owned by Federal, state, or local governments. Only 7 percent of all public order and safety buildings were constructed in the 1990's. The Northeast Census region had a high concentration of public order and safety buildings—43 percent of these buildings are in the Northeast (while the Northeast region contained only 9 percent of all commercial buildings).

236

EPRI Phased Array Performance Demonstration for Axial Entry Blade Attachment Inspection - Technical Update  

Science Conference Proceedings (OSTI)

The disk rim blade attachment area is one of the most highly stressed components of the steam turbine rotor. Reliable and accurate inspection of the disk rim blade attachment area is essential for the determination of rotor operability and remaining life. The purpose of the Electric Power Research Institute's (EPRI's) Phased Array Performance Demonstration for Axial Entry Blade Attachment Inspection Project is to determine the inspection performance levels of commercial entities offering these inspection...

2008-12-22T23:59:59.000Z

237

Microsoft Word - Policy Flash 2010-77 Attachment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Use of Federal Supply Schedules Use of Federal Supply Schedules Contractors placing orders under Federal Supply Schedule contracts shall follow the terms of the applicable Schedule contract and include with each order- * A copy of the letter of authorization (unless a copy of the authorization was previously furnished to the Federal Supply Schedule contractor); and * The following statement: This order is placed under written authorization from _____________________________ dated ______________. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern. _______________________________________________________________________________________ _______________________________________________________________________________________

238

Implementation Workshop: High Performance Work Organizations  

E-Print Network (OSTI)

Since the rise of the industrial revolution, there are few challenges that compare in scale and scope with the challenge of implementing lean principles in order to achieve high performance work systems. This report summarize ...

Klein, Jan

239

Closure operators for order structures  

Science Conference Proceedings (OSTI)

We argue that closure operators are fundamental tools for the study of relationships between order structures and their sequence representations. We also propose and analyse a closure operator for interval order structures.

Ryszard Janicki; Dai Tri Man L; Nadezhda Zubkova

2009-09-01T23:59:59.000Z

240

Live Working Resource Center  

Science Conference Proceedings (OSTI)

EPRI created the Live Working Resource Center web site to provide utilities the critical information they need to conduct live work safely and efficiently. This report is a summary of work performed in 2007 on the web site. See EPRI's Live Working Resource Center.

2007-11-30T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Scientific Working Groups  

Science Conference Proceedings (OSTI)

... TWGDAM 1988). SWGDOG, Scientific Working Group on Dogs and Orthogonal Detection Guidelines, 2004. SWGTOX, Scientific ...

2013-07-10T23:59:59.000Z

242

A point of order 8  

E-Print Network (OSTI)

A formula expressing a point of order 8 on an elliptic curve, in terms of the roots of the associated cubic polynomial, is given. Doubling such a point yields a point of order 4 distinct from the well-known points of order 4 given in standard references such as "A course of Modern Analysis" by Whittaker and Watson.

Semjon Adlaj

2011-10-03T23:59:59.000Z

243

ORDER  

NLE Websites -- All DOE Office Websites (Extended Search)

6-2010 6-2010 PACKAGING AND TRANSPORTATION FOR OFFSITE SHIPMENT OF MATERIALS OF NATIONAL SECURITY INTEREST NATIONAL NUCLEAR SECURITY ADMINISTRATION Office of Defense Programs DOE O 461.1B DOE O 461.1B 1 12-16-2010 PACKAGING AND TRANSPORTATION FOR OFFSITE SHIPMENT OF MATERIALS OF NATIONAL SECURITY INTEREST 1. PURPOSE. The Department of Energy (DOE) has broad authority under the Atomic Energy Act of 1954, as amended (AEA), to regulate all aspects of activities involving radioactive materials that are undertaken by DOE or on its behalf, including the transportation of radioactive materials. DOE exercises this authority to regulate certain DOE shipments, such as shipments of materials of national security interest undertaken by governmental employees or shipments involving special circumstances. The National

244

ORDER  

Office of Legacy Management (LM)

chairperson of the STAAB. g. Assistant Deputy Administrator for Science, Engineering and Production Programs. (1) Coordinates NNSA packaging needs for materials of national...

245

ORDER  

Office of Legacy Management (LM)

Sciences (BES); DOE Office of Energy Efficiency and Renewable Energy (EERE), Solar Energy Technologies Program; DOE Office of Environmental Management (EM), Office of Technology...

246

Ordering  

NLE Websites -- All DOE Office Websites (Extended Search)

spacer spacer spacer About DOE Organization News Contact Us Search Search Go spacer U.S. Department of Energy header image Science & Technology Energy Sources Energy Efficiency...

247

ORDER  

Office of Legacy Management (LM)

and necessary interactions between S&S programs and other disciplines such as safety, emergency management, classification, counterintelligence, facility operations, cyber system...

248

Rates - WAPA-137 Rate Order  

NLE Websites -- All DOE Office Websites (Extended Search)

WAPA-137 Rate Order WAPA-137 Rate Order 2009 CRSP Management Center Customer Rates Second Step Presentation from the June 25, 2009, Customer Meeting Handout Materials from the June 25, 2009, Customer Meeting Customer Comment Letters ATEA CREDA Farmington ITCA AMPUA Rate Adjustment Information The second step of WAPA-137 SLCA/IP Firm Power, CRSP Transmission and Ancillary Services rate adjustment. FERC Approval of Rate Order No. WAPA-137 Notice Of Filing for Rate Order No. WAPA-137 Published Final FRN for Rate Order No. WAPA-137 Letter to Customers regarding the published Notice of Extension of Public Process for Rate Order No. WAPA-137 Published Extension of Public Process for Rate Order No. WAPA-137 FRN Follow-up Public Information and Comment Forum Flier WAPA-137 Customer Meetings and Rate Adjustment Schedule

249

2011-SCE-1605 YMGI Order Agreement.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

YMGI Group LLC, YMGI Group LLC, Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY Washington, D.C. 20585 ) ) ) ) ) ) ORDER Case Number: 20 11-SCE-1605 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Depmiment of Energy ("DOE") and YMGI Group LLC ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. § 429.12 and distribution in commerce in the U.S. of basic models of a covered product that failed to meet the energy conservation requirements as described at 10 C.F.R. § 430.32( c). 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this

250

Appendix A - Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

o Cyber Security Plan ATTACHMENT 1- RFP RHB-3-23115 - 2 - o Construction Safety and Health Plan o Project Completion Criteria o Project Transition to Operations Plan o...

251

Dissociative Electron Attachment to Polyatomic Molecules - I : Water  

E-Print Network (OSTI)

Using the velocity map imaging technique, we studied and characterized the process of Dissociative Electron Attachment (DEA) in polyatomic molecules like Water, Hydrogen Sulphide, Ammonia, Methane, Formic Acid and Propyl Amine. We present the details of these studies in a series of 5 articles. In the first article here, we discuss the DEA process in gas phase water ($H_{2}O$ and $D_{2}O$) molecules. Electrons of 6.5 eV, 8.5 eV and 12 eV are captured by water molecules in neutral ground state to form $H_{2}O^{-*}$ ($D_{2}O^{-*}$) resonant states which dissociate into an anion fragment and one or more neutrals. Kinetic energy and angular distributions of the fragment anions $H^{-}$($D^{-}$) and $O^{-}$ produced from the three negative ion resonant states in the entire $2\\pi$ scattering range are obtained. Unique angular distribution patterns are observed at the 8.5 eV and 11.8 eV resonances showing dissociation dynamics beyond the axial recoil approximation.

Ram, N Bhargava; Krishnakumar, E

2010-01-01T23:59:59.000Z

252

Nevada Test Site Environmental Report 2007 Attachment A: Site Description  

SciTech Connect

This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy Wills

2008-09-01T23:59:59.000Z

253

Prime Contract Modification M070 Section J Attachment 5 Applicable...  

NLE Websites -- All DOE Office Websites (Extended Search)

in whole or in part, and in accordance with Clause, 970.5204-2, Laws, Regulations, and DOE Directives (DEC 2000) ORDER NAME APPROVAL DATE DOE O 110.3 Conference Management 11...

254

Electron Attachment to CO2 in Supercritical Ethane  

NLE Websites -- All DOE Office Websites (Extended Search)

20 and 100 ns in the high pressure range. The reaction volume changes more than an order of magnitude, from -20.0 to -0.5 lmol, over the pressure and temperature ranges...

255

Attachment to Joint Declaration of the Ministerial Meeting for ITER Moscow, 28th  

E-Print Network (OSTI)

Attachment to Joint Declaration of the Ministerial Meeting for ITER Moscow, 28th June 2005 Joint will be decided jointly, based upon the wishes of the non-Host as long as this serves the goal of promoting 5 May 2005 #12;Attachment to Joint Declaration of the Ministerial Meeting for ITER Moscow, 28th June

256

Shift Work and Potential Health Effects  

Science Conference Proceedings (OSTI)

The objective of this report is to inform the electric power industry of current scientific knowledge on worker health and safety risks associated with shift work in order to support future research planning. Shift work has been found to be associated with increased cancer risks8212primarily of breast cancer and (to a lesser extent) prostate and colon cancer. Risk of occupational injuries increases with several common characteristics of shift work8212particularly rotating shifts and longer shift lengths....

2011-10-31T23:59:59.000Z

257

The Working Poor and Welfare Recipiency by  

E-Print Network (OSTI)

Many people do not seem to take advantage of the welfare system. Of the working poor who qualify for welfare, two thirds of those eligible for food stamps and one-third of those eligible for AFDC do not receive these benefits. Those who qualified for assistance were in their prime working years--between 25 and 45. Thus they were not "marginal" workers who were too young or old to be attached to the labor force. Those who qualified for assistance worked many hours: Most of those who qualified for food stamps worked full time. Most of those who qualified for AFDC worked at least half-time. Most of those who qualified for AFDC or food stamps had high school degrees or greater. Many of those who qualified for AFDC or food stamps were in married couple families: For food stamps, almost half of those who qualified were in married couple families; one third of those who qualified for AFDC were in married couple families. Thus the portrait of the eligible working poor was not one of marginal workers, either disproportionately younger or older workers, or workers who are otherwise out of the ordinary. Most were in their prime working years, most worked many hours, most had decent educations, and many were married. Most of those who qualified for food stamps or AFDC simply earned too little or were in unstable jobs: Most were in service and clerical occupations, and in retail and professional industries (the latter dominated by health and residential care). These jobs are the lowest paying occupations and industries. Few of those eligible for AFDC or food stamps belonged to unions (7 % were represented by labor unions), further depressing their wages and adding job instability. 2

Marlene Kim; Thanos Mergoupis; Marlene Kim; Thanos Mergoupis

1995-01-01T23:59:59.000Z

258

Electrical Safe Work Practices  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrical Safe Work Practices Electrical Safe Work Practices July 15, 2005 NOTE: Working hot is a last alternative All activities on or near electrically energized systems having live parts shall be conducted in accordance with the limitations and procedures specified in the latest version of NFPA 70E and with the safe work practices and conditions that follow. Only qualified personnel {as defined in NFPA 70E Article 110.6(D)} as authorized by supervisor can perform such work. Safe Work Practices: Know the equipment and potential hazards - Define the scope of work. Submit the scope of work to your supervisor for approval. Analyze the hazards use engineered methods to mitigate hazards. Establish procedures as necessary. Use barricades or other means to prevent unqualified persons crossing approach boundaries.

259

Paperclips Etc. Special Order Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PSS-02.2 (March 7, 2011) Replaces PSS-02.1 PAPERCLIPS Etc. SPECIAL Orders Form This form is used to order supplies that are not readily available in the DOE HQ self-service supply stores or for items that require approval by Office Management. All supplies ordered MUST be used for Official Government Business only. Requestor's Name: ___________________________________________________ Date: __________________ Phone Number: __________________ DOE ID Badge No.: ________________________________________ Catalog Name: ______________________________________________________ Org Code: ______________ Item Number Page # Item Description Quantity Store Use Only ALL printed names (legible), signatures and dates are required before your Special order is processed.

260

Relevant Executive Orders and Policies  

NLE Websites -- All DOE Office Websites (Extended Search)

please click here. Executive Order 13514: Federal Leadership in Environmental, Energy, and Economic Performance (2009) In October 2009, President Obama issued Executive...

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

DOE Order on Quality Assurance  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this order is to ensure that Department of Energy (DOE), including National Nuclear Security Administration (NNSA), products and services meet or exceed customers requirements and...

262

Office of Enforcement - Compliance Orders  

NLE Websites -- All DOE Office Websites (Extended Search)

Enforcement Preliminary Notice of Violation and Compliance Order isued to Fluor Daniel Hanford, Inc., relating to events at the Spent Nuclear Fuels Project, K-Basins and other...

263

Live Working Resource Forum  

Science Conference Proceedings (OSTI)

This project involves development of a Live Working Resource Forum for documenting common and unique live work practices. It also serves as a repository of lessons learned derived from analysis of live work incidents. This Technical Update report is the design document of the Forum.

2006-12-14T23:59:59.000Z

264

Working Group 7 Summary  

SciTech Connect

The primary subject of working group 7 at the 2012 Advanced Accelerator Concepts Workshop was muon accelerators for a muon collider or neutrino factory. Additionally, this working group included topics that did not fit well into other working groups. Two subjects were discussed by more than one speaker: lattices to create a perfectly integrable nonlinear lattice, and a Penning trap to create antihydrogen.

Nagaitsev S.; Berg J.

2012-06-10T23:59:59.000Z

265

Order acceptance using genetic algorithms  

Science Conference Proceedings (OSTI)

This paper uses a genetic algorithm to solve the order-acceptance problem with tardiness penalties. We compare the performance of a myopic heuristic and a genetic algorithm, both of which do job acceptance and sequencing, using an upper bound based on ... Keywords: Genetic algorithms, Order acceptance, Scheduling

Walter O. Rom; Susan A. Slotnick

2009-06-01T23:59:59.000Z

266

Semidefinite Relaxations of Ordering Problems  

E-Print Network (OSTI)

Jan 19, 2011 ... The quadratic ordering problem does not seem to have attracted ... 2 Linear Ordering as a Linear Program in 0-1 variables .... Instead of the Lovsz-Schrijver lifting procedure, ...... Review of Economics and Statistics, 18, 1936. ... IEEE Transactions on Systems, Man, and Cybernetics, 11(2):109125, 1981.

267

Evaluating ordering heuristics for dynamic partial-order reduction techniques  

Science Conference Proceedings (OSTI)

Actor programs consist of a number of concurrent objects called actors, which communicate by exchanging messages. Nondeterminism in actors results from the different possible orders in which available messages are processed. Systematic testing of actor ...

Steven Lauterburg; Rajesh K. Karmani; Darko Marinov; Gul Agha

2010-03-01T23:59:59.000Z

268

DOE O 3750.1 Chg 6, Work Force Discipline  

Directives, Delegations, and Requirements

The order provides guidance and procedures and states responsibilities for maintaining work force discipline in DOE. Chg 1, dated 3-11-85; Chg 2, dated ...

1983-03-23T23:59:59.000Z

269

RPAM & Energy Order Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

430.1C, Real Property Asset Management 430.1C, Real Property Asset Management and DOE O 430.2B, Departmental Energy, Renewable Energy and Transportation Management Requirements, Overlap & Differences Office of Engineering and Construction Management September 2009 2 10/27/2009 Energy Order & RPAM Order Requirements DOE O 430.1C - RPAM DOE O 430.2B ENERGY ORDER Energy Efficiency Water Consumption Utility Metering ESPCs & USPCs Personnel - Energy Training Environmental Management System (EMS) Real Property Performance Indicators Sustainable Buildings Facilities Information Management System (FIMS) Personnel - Certified Realty Specialists Ten Year Site Plans Sustainable & Integrated Design TEAM Executable Plans High Performance Building Plan OVERLAP Real Property

270

Exact test for Markov order  

E-Print Network (OSTI)

We describe an exact test of the null hypothesis that a Markov chain is nth order versus the alternate hypothesis that it is $(n+1)$-th order. The procedure does not rely on asymptotic properties, but instead builds up the test statistic distribution via surrogate data and is valid for any sample size. Surrogate data are generated using a novel algorithm that guarantees, per shot, a uniform sampling from the set of sequences that exactly match the nth order properties of the observed data.

Pethel, Shawn D

2013-01-01T23:59:59.000Z

271

Microsoft Word - FOR WEB as signed CA - HKC 33002 CA-Order-Pymt Instr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HKC-US, LLC HKC-US, LLC Respondent ) ) ) ) ) Case Number: 2013-SE-33002 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into by the U.S. Department of Energy ("DOE") and HKC-US, LLC ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. Part 429. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me, I find that the public interest would be served by adopting the Compromise

272

Microsoft Word - Act One 49001 Order reconstructed fm RoyPac  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Act One Communications, Inc. Act One Communications, Inc. Respondent ) ) ) ) ) Case Number: 2013-CE-49001 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into by the U.S. Department of Energy ("DOE") and Act One Communications, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. Part 429. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me,

273

2010-CW-0715 Allen Co. _Order and Compromise Agreement.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Allen Co., Allen Co., Respondent BEFORE THE U.S. DEPARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2010-CE-0715 Issued: September 29, 201 0 By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Allen Co. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at I 0 C.P.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

274

2010-CW-0712 Artisan_Order and Compromise Agreement.pdf  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Artisan Manufacturing Company, Artisan Manufacturing Company, Inc., Respondent Issued: September 17, 20 I 0 ) ) ) ) ) ORDER By the General Counsel, U.S. Department of Energy: Case Number: 20 I 0-CW -0712 I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Artisan Manufacturing Company, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.F.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

275

Microsoft Word - FOR WEB - Universal 26004 Order & CA.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Universal Lighting Technologies, Inc., Respondent ) ) ) ) ) ) Case Number: 2013-SE-26004 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Universal Lighting Technologies, Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for distributing in commerce in the United States fluorescent lamp ballasts that failed to meet the applicable standard for energy usage. See 10 C.F.R. § 430.32(m)(3). 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by

276

Work/Life Balance  

NLE Websites -- All DOE Office Websites (Extended Search)

Work/Life Balance Work/Life Balance /careers/_assets/images/careers-icon.jpg Work/Life Balance Explore the multiple dimensions of a career at LANL: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. What our employees say: Health & Wellness "The Lab pays 80 percent of my family's medical premiums with Blue Cross Blue Shield of New Mexico." Retirement & Savings "With the Lab matching my 401K contributions of six percent, I'm making good progress in saving for my retirement." Time Off "Like many of my colleagues here, I work nine hours on most work days so that I can take every other Friday off." Tax Savings "My flexible spending accounts allow me to set aside pre-tax dollars for

277

Fiscal Year 2011 Audit of the Work Performed Under the Work for Others Program at the Lawrence Berkeley National Laboratory  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit Report Fiscal Year 2011 Audit of the Work Performed Under the Work for Others Program at the Lawrence Berkeley National Laboratory OAS-L-13-10 June 2013 Department of Energy Washington, DC 20585 June 24, 2013 MEMORANDUM FOR THE MANAGER, BERKLEY SITE OFFICE FROM: Rickey R. Hass Deputy Inspector General for Audits and Inspections Office of Inspector General SUBJECT: INFORMATION: Audit Report on "Fiscal Year 2011 Audit of the Work Performed Under the Work for Others Program at the Lawrence Berkeley National Laboratory" BACKGROUND The attached report presents the results of the audit of Lawrence Berkeley National Laboratory's (Berkeley) Work for Others (WFO) Program. The Office of Inspector General contracted with

278

EPRI Live Working Project  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has been conducting research in the area of live working for several decades. This research has resulted in a large number of reports and other products. To help users locate the results of EPRIs research in live working, an annual update is prepared containing brief descriptions of the products.BackgroundLive workthe performance of maintenance, construction, or testing on equipment and circuits that ...

2012-09-06T23:59:59.000Z

279

Executive Order 13514 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

514 514 Executive Order 13514 October 8, 2013 - 1:41pm Addthis Executive Order (E.O.) 13514, Federal Leadership in Environmental, Energy, and Economic Performance, was signed on October 5, 2009. It expanded upon the energy reduction and environmental performance requirements of E.O. 13423. E.O. 13514 sets numerous Federal energy requirements the following. This summary is intended as a reference only. Refer to the full text of E.O. 13514 for more details relevant to your work. Accountability and Transparency E.O. 13514 accountability, transparency, and reporting requirements include: Within 30 days, Federal agency heads must designate a senior management official to serve as Senior Sustainability Officer accountable for agency conformance. The Senior Sustainability Officer designation must be reported

280

Executive Order 13221 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

221 221 Executive Order 13221 October 8, 2013 - 1:48pm Addthis Executive Order (E.O.) 13221, Energy-Efficient Standby Power Devices, calls for Federal agencies to purchase products that use minimal standby power when possible. It was signed on August 2, 2001. Requirements for Energy Efficiency and Standby Power This section outlines major requirements defined by E.O. 13221. The content is intended as a reference only. You should refer to the text of E.O. 13221 for more details relevant to your work. Federal agencies must purchase products that use no more than one watt in standby power consuming mode when purchasing commercially-available, off-the-shelf products that use external standby power devices or that contain an internal standby power function. If such products are not available, agencies shall purchase products with

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Executive Order 13423 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

423 423 Executive Order 13423 October 8, 2013 - 1:44pm Addthis Executive Order (E.O.) 13423, Strengthening Federal Environmental, Energy, and Transportation Management, was signed on January 24, 2007, to strengthen key goals for the Federal Government. It set more challenging goals than the Energy Policy Act of 2005 (EPAct 2005) and superseded E.O. 13123 and E.O. 13149. This summary below is intended as a reference only. You should refer to the full text of E.O. 13423 for more details relevant to your work. Implementing Instructions In consultation with the Director of the Office of Management and Budget, the Chairman of the Council on Environmental Quality issued instructions and defined requirements for implementing E.O. 13423. The implementation instructions identify the entities responsible for coordination and

282

High order well-balanced schemes  

SciTech Connect

In this paper the authors review some recent work on high-order well-balanced schemes. A characteristic feature of hyperbolic systems of balance laws is the existence of non-trivial equilibrium solutions, where the effects of convective fluxes and source terms cancel each other. Well-balanced schemes satisfy a discrete analogue of this balance and are therefore able to maintain an equilibrium state. They discuss two classes of schemes, one based on high-order accurate, non-oscillatory finite difference operators which are well-balanced for a general class of equilibria, and the other one based on well-balanced quadratures, which can - in principle - be applied to all equilibria. Applications include equilibria at rest, where the flow velocity vanishes, and also the more challenging moving flow equilibria. Numerical experiments show excellent resolution of unperturbed as well as slightly perturbed equilibria.

Noelle, Sebastian [Institut fur Physikalische Chemie der RWTH; Xing, Yulong [ORNL; Shu, Chi-wang [Brown University

2010-01-01T23:59:59.000Z

283

Working/Functional Fluids  

Science Conference Proceedings (OSTI)

... power cycle except that it uses an organic working fluid instead of water to allow operation at lower temperatures, including geothermal or solar ...

2012-10-05T23:59:59.000Z

284

Hot Working I - TMS  

Science Conference Proceedings (OSTI)

The conversion of ingot structure to fine equiaxed wrought structure will be ... Special methods to breakdown the difficult-to-work titanium aluminide alloys will ...

285

tchr_work_template  

NLE Websites -- All DOE Office Websites (Extended Search)

are identified and prepared in advance. f. teachers receive advance communication about program logistics. 4. The Teacher's Work Experience a. relates to the scientific and...

286

Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final  

SciTech Connect

Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

Not Available

1994-03-01T23:59:59.000Z

287

Individual Virtual Competence and Its Influence on Work Outcomes  

Science Conference Proceedings (OSTI)

Witnessing both opportunities and challenges in virtual work arrangements, researchers have explored a number of technological, social, and organizational factors in order to improve virtual work effectiveness. However, there is limited understanding ... Keywords: Individual Virtual Competence, Individual Work Outcomes, Virtual Organization, Virtual Work

Yinglei Wang; Nicole Haggerty

2011-04-01T23:59:59.000Z

288

Keystone: Order (2013-CE-2601)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Keystone Technologies, LLC to pay a $8,000 civil penalty after finding Keystone had failed to certify that certain models of fluorescent lamp ballasts comply with the applicable energy conservation standards.

289

TCP: Order (2011-CE-3501)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Technical Consumer Products, Inc. to pay a $3,000 civil penalty after finding TCP had failed to certify that a certain model of medium base compact fluorescent lamp (CFL) complies with the applicable energy conservation standards.

290

Leotek: Order (2013-CE-4903)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Leotek Electronics USA Corp. to pay a $8,000 civil penalty after finding Leotek had failed to certify that certain models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

291

Dialight: Order (2013-CE-4902)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Dialight Corporation to pay a $8,000 civil penalty after finding Dialight had failed to certify that certain models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

292

Trastar: Order (2013-CE-49003)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Trastar Inc. to pay a $8,000 civil penalty after finding Trastar had failed to certify that certain basic models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

293

Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation  

Energy.gov (U.S. Department of Energy (DOE))

Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

294

STATEMENT OF WORK  

National Nuclear Security Administration (NNSA)

PART III - SECTION J APPENDIX B STATEMENT OF WORK Table of Contents 1.0 General.................................................................................................................... 273 2.0 Laboratory Mission and Scope of Work. ................................................................ 274 3.0 Science & Technology. ........................................................................................... 275 3.1 Defense Programs. .................................................................................................. 276 3.1.1 Stewardship of United States Nuclear Weapons. ................................................ 276 3.1.1.1 Stockpile Certification. .......................................................................................

295

ORISE: Working with ORISE  

NLE Websites -- All DOE Office Websites (Extended Search)

Oak Ridge Institute for Science Education Oak Ridge Institute for Science Education Working with ORISE If you are interested in learning about how your agency can utilize the capabilities of the Oak Ridge Institute for Science and Education (ORISE) through a Work for Others agreement or a procurement contract, or if you are looking for career opportunities, the following information provides an explanation of how to work with ORISE. If you do not see an option that applies to your needs, please contact ORISE General Information. Work for Others For organizations and agencies that are not affiliated with U.S. Department of Energy (DOE), such groups still have the opportunity to partner with the Oak Ridge Institute for Science and Education (ORISE) through the DOE Work For Others (WFO) program. DOE's WFO program allows ORISE to support

296

Trails Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Trails Working Group Trails Working Group Trails Working Group Our mission is to inventory, map, and prepare historical reports on the many trails used at LANL. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email The LANL Trails Working Group inventories, maps, and prepares historical reports on the many trails used at LANL. Some of these trails are ancient pueblo footpaths that continue to be used for recreational hiking today. Some serve as quiet and non-motorized alternatives between the Townsite and LANL or between technical areas. The Trails Working Group, established in December 2003, includes representatives from local citizen hiking groups, Los Alamos County, Forest Service, Park Service, Los Alamos National Laboratory and the NNSA Los

297

Interagency Working Groups (IWGs)  

NLE Websites -- All DOE Office Websites (Extended Search)

Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) Print E-mail Interagency Working Groups (IWGs) are the primary USGCRP vehicles for implementing and coordinating research activities within and across agencies. These groups are critical to Program integration and in assessing the Program's progress. The working groups span a wide range of interconnected issues of climate and global change, and address major components of the Earth's environmental and human systems, as well as cross-disciplinary approaches for addressing these issues. IWGs correspond to program functions and are designed to bring agencies together to plan and develop coordinated activities, implement joint activities, and identify and fill gaps in the Program's plans. They allow public officials to communicate with each other on emerging directions within their agencies, on their stakeholder needs, and on best practices learned from agency activities. Together, these functions allow the agencies to work in a more coordinated and effective manner.

298

Microsoft Word - Policy Flash 2010-73 Attachment 4  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PAST-PERFORMANCE REFERENCE INFORMATION FORM (JUL 2010) PAST-PERFORMANCE REFERENCE INFORMATION FORM (JUL 2010) 1. Complete name of Government agency, commercial firm, or other organization 2. Complete address 3. Contract number or other reference and type 4. Date of contract 5. Date work commenced 6. Date work was completed or scheduled to be completed 7. Contract Type and Contract Value 8. Final amount invoiced or amount invoiced to date 9a. Technical point of contact (name, title, company/agency, address, telephone number, fax number, and e-mail address) 9b. Contracting point of contact (name, title, company/agency, address, telephone number, fax number, and e-mail address) 9c. Environmental Regulator point of contact (name, title, company/agency, address, telephone number, fax number, and e-mail

299

Attorney Working Files  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C C REQUEST FOR RECORDS DlS?OSlTlON AUTWORIT'f ( S e e ~nstruct~ons on re verse) NATIONAL ARCHIVES and RECORDS ADMINISTRATION (NIR) WASHINGTON, DC 20408 1. FROM (Aaencv o r establishment) LEAVE BLANK (NARA use only) JOB NUMBER /"L /;-4f3y" 77 - 4 DATE RECEIVE% /-/ - 95 NOTIFICATION TO AGENCY . - - N a t i o n a l Renewable Enerev L a b o r a t o r y C D 0 . t - 2. MAJOR SLlBDlVlSlON In accordance w ~ t h the provlslons of 44 U S C 3303a t h e d ~ s p o s i t ~ o n r e q u e s t , l..~l;al Off i c e - -- 3. fvliNOR SL;~~;IVISION 6. AGENi'r' C ii;7T:FICATION I hereby certify that I am authorized to act for this agency in matters pertaining disposition of its records and that the records roposed for disposal on the attached 3 pa@) are not notv needed for the business of this agency or wiKnot be needed after the retention eriods specified; and that written concurrence from

300

Exploring Cloud-to-Ground Lightning Earth Highpoint Attachment Geography by Peak Current  

Science Conference Proceedings (OSTI)

This study applied remotely sensed cloud-to-ground (CG) lightning strike location data, a digital elevation model (DEM), and a geographic information system (GIS) to characterize negative polarity peak current CG lightning Earth attachment ...

Brandon J. Vogt

2011-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Consent Orders and Settlement Agreements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Enforcement » Consent Orders and Settlement Agreements Services » Enforcement » Consent Orders and Settlement Agreements Consent Orders and Settlement Agreements Documents Available for Download January 13, 2012 Consent Order, Battelle Energy Alliance - NCO-2012-01 Issued to Battelle Energy Alliance, LLC, related to the Reactor Coolant Draining Event at the Idaho National Laboratory Advanced Test Reactor October 13, 2011 Consent Order, URS Energy & Construction, Inc. - NCO-2011-02 Issued to URS Energy & Construction, Inc., related to Quality Improvement and Work Control Program Deficiencies associated with Construction of the Sodium Bearing Waste Treatment Project at the Idaho National Laboratory October 6, 2011 Consent Order, CH2M-WG Idaho, LLC - WCO-2011-01 Consent Order issued to CH2M-WG Idaho, LLC related to a Hoisting Incident

302

Development of an LP Rotor Rim-Attachment Cracking Life Assessment Code (LPRimLife)  

Science Conference Proceedings (OSTI)

Most of the domestic turbine fleet has reached the 50,000-hour range of service operation. Unfortunately, above this level of operational hours, a number of turbines have begun to experience low-pressure (LP) rim-attachment cracking. A computer code developed by EPRI, LPRimLife, provides utilities with a methodology for assessing the remaining life of LP rim attachments with known or suspected cracking.

1999-12-07T23:59:59.000Z

303

Design and analysis of a second order phase locked loops (PLLs)  

Science Conference Proceedings (OSTI)

This work concerns with the design and analysis of phase locked loops (PLLs). In the last decade a lot of works have been done about the analysis of PLLs. The phase locked loops are analyzed briefly, second order, third order, and fourth order. In practically ... Keywords: charge pump PLL (CPPPL), loop filter (LF), phase locked loop (PLL)

Diary R. Sulaiman

2006-05-01T23:59:59.000Z

304

Renewable Energy Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Working Group Working Group Renewable Energy Working Group October 7, 2013 - 10:17am Addthis The Renewable Energy Working Group provides a forum for Federal agencies and the renewable energy industry to exchange information on existing and planned projects, lessons learned, sources of project funds, and technologies. Guidance The Renewable Energy Working Group is charged with providing guidance about renewable energy regulatory requirements. Federal Renewable Energy Requirement Guidance Under EPAct 2005 and Executive Order 13423 Transmittal Letter Summarizing the Federal Renewable Energy Requirement Guidance Members Led by the Federal Energy Management Program, the Renewable Energy Working Group is made up of more than 100 Federal agency representatives, U.S. Department of Energy programs, and the renewable energy industry.

305

How Hybrids Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Hybrids Work How Hybrids Work Diagram of full hybrid vehicle components, including (1) an internal combustion engine, (2) an electric motor, (3) a generator, (4) a power split device, and (5) a high-capacity battery. Flash Animation: How Hybrids Work (Requires Flash 6.0 or higher) HTML Version: How Hybrids Work Hybrid-electric vehicles (HEVs) combine the benefits of gasoline engines and electric motors and can be configured to obtain different objectives, such as improved fuel economy, increased power, or additional auxiliary power for electronic devices and power tools. Some of the advanced technologies typically used by hybrids include Regenerative Braking. The electric motor applies resistance to the drivetrain causing the wheels to slow down. In return, the energy from the

306

Working, Living, and Belonging  

E-Print Network (OSTI)

and Belonging June 28, 2013 Noah D. Zatz, UCLA, and EileenUniversity Press, 1998). Noah D. Zatz, "Working at theUniversity Press, 2012); Noah D. Zatz, "The Impossibility of

Zatz, Noah; Boris, Eileen

2013-01-01T23:59:59.000Z

307

Work Authorization System  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington, D.C. DOE O 412.1A Approved: 4-21-05 This directive was reviewed and certified as current and necessary by Susan J. Grant, Director, Office of Management, Budget and Evaluation/Chief Financial Officer, 4-21-05. SUBJECT: WORK AUTHORIZATION SYSTEM 1. OBJECTIVES. To establish a work authorization and control process for work performed by designated site and facility management contractors, and other contractors as determined by the procurement executive, consistent with the budget execution and program evaluation requirements of the Department of Energy's (DOE's) Planning, Programming, Budgeting, and Evaluation process. 2. CANCELLATIONS. DOE O 412.1 Work Authorization System, dated 4-20-99. Cancellation of a directive does not, by itself, modify or otherwise affect any contractual

308

NREL: Working for NREL  

NLE Websites -- All DOE Office Websites (Extended Search)

Working for NREL Working for NREL We're always on the lookout for talented people who believe in our mission and support our values. NREL's inclusive work environment benefits from diversity throughout the organization, values individual differences, and encourages employees to develop and contribute to their full potential. Working for NREL is a challenging and exciting experience for nearly 2,300 staff members of all backgrounds. We offer competitive salaries and excellent benefits. NREL Mission While our cultures and creeds, and lifestyles and languages may differ, we share a common desire to carry out our mission- To develop renewable energy and energy efficiency technologies and practices, To advance related science and engineering, and To transfer knowledge and innovations to address the nation's energy

309

Short Order Macromedia Dreamweaver 3  

Science Conference Proceedings (OSTI)

From the Publisher:Short Order Dreamweaver 3 teaches you Dreamweaver in a step-by-step progression of the complete Web site creation process. Presented in a comprehensive yet streamlined format, examples based on real-life projects cover all phases of ...

Steven Moniz

2000-04-01T23:59:59.000Z

310

Watermark: Order (2011-SW-2908)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Watermark Designs, Ltd. to pay a $4,200 civil penalty after finding Watermark Designs, Ltd. had manufactured and distributed in commerce in the U.S. sixty-three units of basic model SH-FAL90, a noncompliant showerhead.

311

Hicon: Order (2013-SE-1426)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Ningbo Hicon International Industry Company, Ltd. to pay a $1,912,714 civil penalty after finding Hicon had manufactured and distributed in commerce in the U.S. 115,126 units of basic model BD-200, a noncompliant freezer.

312

Universal: Order (2013-SE-26004)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Universal Lighting Technologies, Inc. to pay a $7,264 civil penalty after finding Universal had manufactured and distributed in commerce in the U.S. 454 units of model B140R277HP, a noncompliant fluorescent lamp ballast.

313

Weighted order statistic classifiers with large rank-order margin.  

Science Conference Proceedings (OSTI)

We describe how Stack Filters and Weighted Order Statistic function classes can be used for classification problems. This leads to a new design criteria for linear classifiers when inputs are binary-valued and weights are positive . We present a rank-based measure of margin that can be directly optimized as a standard linear program and investigate its effect on generalization error with experiment. Our approach can robustly combine large numbers of base hypothesis and easily implement known priors through regularization.

Porter, R. B. (Reid B.); Hush, D. R. (Donald R.); Theiler, J. P. (James P.); Gokhale, M. (Maya)

2003-01-01T23:59:59.000Z

314

Operating Plan of Mirant Potomac River, LLC in Compliance with Order No.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Operating Plan of Mirant Potomac River, LLC in Compliance with Operating Plan of Mirant Potomac River, LLC in Compliance with Order No. 202-05-03 Operating Plan of Mirant Potomac River, LLC in Compliance with Order No. 202-05-03 Docket No. EO-05-01: Attached is the Operating Plan of Mirant Potomac River, LLC, which is being submitted in compliance with Order No. 202-05-03, issued by the Department of Energy on December 20, 2005, in the captioned proceeding. Operating Plan of Mirant Potomac River, LLC in Compliance with Order No. 202-05-03 More Documents & Publications Supplement Number 1 to Operating Plan of Mirnat Potomac River, LLC in Compliance with Order No. 202-05-03 Re: Potomac River Generating Station Department of Energy Case No. EO-05-01: Advanced Notice of Power Outages. Docket No. EO-05-01: Further Notice of 230kV Circuit Planned Outages

315

Interview: LaborWorks@NeighborWorks Provides Vermont Contractors...  

NLE Websites -- All DOE Office Websites (Extended Search)

Focus Series LaborWorks@NeighborWorks Provides Vermont Contractors With Help When They Need It NeighborWorks of Western Vermont (NWWVT), a nonprofit home ownership organization...

316

Part III - List of Documents, Exhibits, and Other Attachments  

National Nuclear Security Administration (NNSA)

0241 See Block 16C 0241 See Block 16C 6. ISSUED BY CODE 05003 NNSA/Los Alamos Site Office U.S. Department of Energy NNSA/Los Alamos Site Office 3747 West Jemez Road Los Alamos NM 87544 8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) L A p L OS ALAMOS NATIONAL SECURITY, ttn: STEVE K. SHOOK .0. BOX 1663, MS P222 OS ALAMOS NM 875450001 CODE 175252894 LLC FACILITY CODE 11 CONTRACT ID CODE I PAGE OF PAGES i I 2 4. REQUISITION/PURCHASE REQ NO. 15. PROJECT NO. (If applicable) 7. ADMINISTERED BY (ff other than Item 6) coDE 105003 NNSA/Los Alamos Site Office U.S. Department of Energy Los Alamos Site Off ice 3747 West Jemez Road Los Alamos NM 87544 (x) 9A. AMENDMENT OF SOLICITATION NO. f - - 9B. DATED (SEE ITEM 11) 10A. MODIFICATION OF CONTRACT/ORDER NO.

317

NETL: CD-ROM Ordering System  

NLE Websites -- All DOE Office Websites (Extended Search)

CD-DVD Ordering System Publications CD-DVD Ordering System Please complete the following information so the National Energy Technology Lab (NETL) can promptly process your order....

318

Working with NREL | Open Energy Information  

Open Energy Info (EERE)

Working with NREL Working with NREL Jump to: navigation, search Each year, NREL initiates or renews relationships with dozens of external partners, including research institutions, industry experts, large corporations, start-ups, and a variety of other organizations. The partnerships take on many forms, ranging from research and development to licensing agreements. Check out the map below to see if NREL is working with any industry partners near you. Loading map... {"format":"googlemaps3","type":"SATELLITE","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":500,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"\u2026

319

Cooper: Order (2012-SE-4701)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Cooper Power Systems, LLC to abide by the Compromise Agreement, which waived the civil penalty after finding Cooper had inadvertently distributed in commerce in the U.S. three models (total of five units) of distribution transformers. Cooper agrees to abide by the terms of a Notice of Noncompliance Determination to be issued pursuant to 10 C.F.R. 429.114.

320

How Fuel Cells Work  

NLE Websites -- All DOE Office Websites (Extended Search)

How Fuel Cells Work How Fuel Cells Work Diagram: How a PEM fuel cell works. 1. Hydrogen fuel is channeled through field flow plates to the anode on one side of the fuel cell, while oxygen from the air is channeled to the cathode on the other side of the cell. 2. At the anode, a platinum catalyst causes the hydrogen to split into positive hydrogen ions (protons) and negatively charged electrons. 3. The Polymer Electrolyte Membrane (PEM) allows only the positively charged ions to pass through it to the cathode. The negatively charged electrons must travel along an external circuit to the cathode, creating an electrical current. 4. At the cathode, the electrons and positively charged hydrogen ions combine with oxygen to form water, which flows out of the cell.

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

ORISE: Work Smart Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

Work Smart Standards Work Smart Standards ORISE Work Smart Standards Set for Environment, Safety, and Health Revision #1, March 21, 2000 Revision #2, Sept. 29, 2000 Revision #3, June 28, 2001 Revision #4, Nov. 9, 2001 Revision #5, Nov. 30, 2001 Revision #6, Jan. 31, 2002 Revision #7, June 28, 2002 Revision #8, Oct. 17, 2002 Revision #9, Nov. 21, 2002 Revision #10, Feb. 28, 2003 Revision #11, May 23, 2003 Revision #12, May 30, 2003 Revision #13, Oct. 30, 2003 Revision #14, Jan. 21, 2004 Revision #15, May 24, 2004 Revision #16, Aug. 17, 2004 Revision #17, Aug. 27, 2004 Revision #18, Oct. 14, 2004 Revision #19, March 28, 2005 Revision #20, May 31, 2005 Revision #21, Aug. 24, 2005 Revision #22, Feb. 17, 2006 Revision #23, March 22, 2006 Revision #24, May 19, 2006 Revision #25, July 26, 2006 Revision #26, Nov. 28, 2006

322

Mon Valley work plan  

Office of Legacy Management (LM)

GWSHP 1.8 GWSHP 1.8 U.S. Department of Energy UMTRA Ground Water Project Work Plan for Characterization Activities at the Shiprock UMTRA Project Site June 1998 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number UGW-511-0020-01-000 Document Number U0013400 Work Performed under DOE Contract No. DE-AC13-96GJ87335 Note: Some of the section page numbers in the Table of Contents may not correspond to the page on which the section appears when viewing them in Adobe Acrobat. Document Number U0013400 Contents DOE/Grand Junction Office Work Plan for Characterization Activities at Shiprock Project Site June 1998 Draft Final Page v Contents Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1.0 Introduction .

323

Working with NIST  

NLE Websites -- All DOE Office Websites (Extended Search)

NIST NIST Terry Lynch Office of Technology Partnerships How to Work with NIST How to Work with NIST „ „ Standards Standards „ „ Collaborative Research & Technology Devolvement Collaborative Research & Technology Devolvement Programs Programs „ „ Invention Licensing Invention Licensing Collaborative Research & Technology Collaborative Research & Technology Development Programs Development Programs „ „ Informal collaboration involving intramural research programs Informal collaboration involving intramural research programs „ „ Guest Research Agreements Guest Research Agreements „ „ Facility Use Agreements Facility Use Agreements „ „ Material Transfer Agreements Material Transfer Agreements „ „ Cooperative Research and Development Agreements (CRADA

324

Towards a characterization of order-invariant queries over tame structures  

Science Conference Proceedings (OSTI)

This work deals with the expressive power of logics on finite structures with access to an additional arbitrary linear order. The queries that can be expressed this way are the order-invariant queries for the logic. For the standard ...

Michael Benedikt; Luc Segoufin

2005-08-01T23:59:59.000Z

325

Work Package Templates  

Science Conference Proceedings (OSTI)

Work Package Templates provides fossil plant maintenance personnel with assorted inspection, minor repair or overhaul templates for various pieces of plant equipment. This guide will assist plant maintenance personnel in improving the efficiency, reliability and reducing the maintenance costs for associated with maintenance on selected pieces of equipment.

2007-02-15T23:59:59.000Z

326

METHOD OF WORKING BERYLLIUM  

DOE Patents (OSTI)

>A process is presented for fabricating beryllium metal. The billet cf beryllium metal is sheathed with a jacket of either copper or stainless steel. It may then be worked by drawing or the like at a tcmperature of 300 to 400 C.

Macherey, R.E.

1959-02-01T23:59:59.000Z

327

Ropes for Live Working  

Science Conference Proceedings (OSTI)

Fiber ropes represent an essential tool in many applications associated with the electric power industry. Ropes used in proximity to or in contact with high-voltage power lines require demanding dielectric properties as well as strength and durability. A comprehensive understanding of live working (LW) rope construction, performance, and use is necessary for safe and efficient operations wherever such ropes are used.

2008-11-18T23:59:59.000Z

328

Stress analyses of flat plates with attached nozzles. Vol. 3. Experimental stress analyses of a flat plate with two closely spaced nozzles of equal diameter attached  

SciTech Connect

The complete test results for a flat plate with two closely spaced nozzles attached are presented. Test loadings were 1:1, 1:2, and 2:1 biaxial planar tension loadings on the plate, axial thrust loadings applied separately to the nozzles, and bending moment loadings applied to the nozzles both within and normal to the plane of symmetry containing the nozzle axes. The test plate was 36 x 36 x 0.375 in., and the attached nozzles had outer diameters of 2.625 in. and wall thicknesses of 0.250 in. The nozzles were located in the center of the plate with their centers 3.0 in. apart and were considered to be free of weld distortions and irregularities in the junction region. 6 references. (auth)

Bryson, J.W.; Swinson, W.F.

1975-12-01T23:59:59.000Z

329

Public Works Transportation Infrastructure Study  

E-Print Network (OSTI)

Public Works Transportation Infrastructure Study Minneapolis City of Lakes Minneapolis Public Works Transportation Infrastructure Study #12;Public Works Transportation Infrastructure Study Minneapolis City Works Transportation Infrastructure Study Minneapolis City of Lakes Background: · Currently, funding

Minnesota, University of

330

Federal Energy Management Program: Executive Order 13514  

NLE Websites -- All DOE Office Websites (Extended Search)

514 514 Executive Order (E.O.) 13514; Federal Leadership in Environmental, Energy, and Economic Performance; was signed on October 5, 2009. It expanded upon the energy reduction and environmental performance requirements of E.O. 13423. E.O. 13514 sets numerous Federal energy requirements in several areas, including: Accountability and Transparency Strategic Sustainability Performance Planning Greenhouse Gas Management Sustainable Buildings and Communities Water Efficiency Electronic Products and Services Fleet and Transportation Management Pollution Prevention and Waste Reduction The summary below is intended as a reference only. Refer to the full text of E.O. 13514 for more details relevant to your work. Accountability and Transparency E.O. 13514 accountability, transparency, and reporting requirements include:

331

Nuclear World Order and Nonproliferation  

SciTech Connect

The decision by India and Pakistan in May 1998 to conduct nuclear weapon tests and declare themselves as nuclear weapon states challenged South Asian regional stability calculations, US nonproliferation policy, and prevailing assumptions about international security. A decade later, the effects of those tests are still being felt and policies are still adjusting to the changed global conditions. This paper will consider non- and counter-proliferation policy options for the United States and Pakistan as they work as partners to prevent the transfer of nuclear technology and further nuclear proliferation.

Joeck, N

2007-02-05T23:59:59.000Z

332

On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint  

DOE Green Energy (OSTI)

It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physical damage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations and reinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

Bosco, N. S.; Silverman, T. J.; Kurtz, S. R.

2012-06-01T23:59:59.000Z

333

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal

334

HANFORD ENGINEER WORKS  

Office of Legacy Management (LM)

HANFORD ENGINEER WORKS HANFORD ENGINEER WORKS IJd *P-t - - ~~~ssiticatiC+n cwcetted rat G.E. NUCLEONICS PROJECT xi I ~@L.%&~--G-ENERAI,@ ELECTRIC z ,m ._.__.-. _ I--..-. By Authority of. COMPANY ._ Atmic Energy Commission Office of Hanford Dire&xl Operations Riohland, Washington Attention; Mr. Carleton Shugg, Manager ./ ALPKA-ROLLED EL'GIL%I jw -879 ' . *_ a. f' Richland, Washington February 6, 1948 , Thla Dclc.Jv-

335

Working With Berkeley Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with the Lab Working with the Lab A-Z Index Search Phone Book Comments Ernest Orlando Lawrence Berkeley National Laboratory Technology Transfer Patent Department Sponsored Projects Office Procurement: Doing Business with the Lab Visitor Information Scientififc Divisions and National User Facilities UC Campus-Labs Collaboration Programs Berkeley Lab stresses collaboration in everything we do. The Laboratory is involved in many research partnerships with private industry. Our mission also includes the transfer of Laboratory inventions to the private sector for rapid commercialization. The role of the Technology Transfer Office is to make technology and expertise developed here available to industry. Contact the Technology Transfer Office to pinpoint research areas of common interest, negotiate rights to Laboratory intellectual property, and to discuss current patent and copyright licensing opportunities.

336

Working Group Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Working Group Reports Special Working Session on the Role of Buoy Observations in the Tropical Western Pacific Measurement Scheme J. Downing Marine Sciences Laboratory Sequim, Washington R. M. Reynolds Brookhaven National Laboratory Upton, New York Attending W. Clements (TWPPO) F. Barnes (TWPPO) T. Ackerman (TWP Site Scientist) M. Ivey (ARCS Manager) H. Church J. Curry J. del Corral B. DeRoos S. Kinne J. Mather J. Michalsky M. Miller P. Minnett B. Porch J. Sheaffer P. Webster M. Wesely K. Zorika G. Zhang Focus of Discussion The session convened on March 2, with brief introductions by Bill Clements. The purpose of the session was to discuss the scientific merits of retrofitting TOGA/TAO buoys with shortwave radiometers. Three questions were posed at the outset of the session to focus the discussion.

337

CHA Guidelines Working Group  

E-Print Network (OSTI)

The Community Health Assessment Guidelines have been updated from the original document published in 1997. The revisions reflect various published sources, as well as accumulated experience with community health assessment within the province of Manitoba. Special thanks to the members of the CHA Guidelines Working Group, composed of representatives of regional health authorities from across the province and Manitoba Health and Healthy Living staff. These guidelines are made

Jody Allan; Sonia Busca Owczar; Ingrid Botting; Maggie Campbell; Bunmi Fatoye; Bill Funk; Tannis Erickson; Sue Lockhart; Ales Morga; Deborah Malazdrewicz; Leonie Stranc

2009-01-01T23:59:59.000Z

338

Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint  

DOE Green Energy (OSTI)

FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

Bosco, N.; Silverman, T.; Kurtz, S.

2012-05-01T23:59:59.000Z

339

Recent advances in ordered intermetallics  

SciTech Connect

This paper briefly summarizes recent advances in intermetallic research and development. Ordered intermetallics based on aluminides and silicides possess attractive properties for structural applications at elevated temperatures in hostile environments; however, brittle fracture and poor fracture resistance limit their use as engineering materials in many cases. In recent years, considerable efforts have been devoted to the study of the brittle fracture behavior of intermetallic alloys; as a result, both intrinsic and extrinsic factors governing brittle fracture have been identified. Recent advances in first-principles calculations and atomistic simulations further help us in understanding atomic bonding, dislocation configuration, and alloying effects in intermetallics. The basic understanding has led to the development of nickel, iron, and titanium aluminide alloys with improved mechanical and metallurgical properties for structural use. Industrial interest in ductile intermetallic alloys is high, and several examples of industrial involvement are mentioned.

Liu, C.T.

1992-12-31T23:59:59.000Z

340

Energy Department Awards First Major Task Order Under Streamlined  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

First Major Task Order Under Streamlined First Major Task Order Under Streamlined Contracting System Energy Department Awards First Major Task Order Under Streamlined Contracting System October 17, 2005 - 11:59am Addthis New Mexico Firm Contracted for Ashtabula Clean-up WASHINGTON, DC - The Department of Energy (DOE) has awarded a Task Order for an estimated $19.4 million to LATA-SHARP Remediation Services, LLC for the completion of clean-up activities at the Ashtabula Closure Project (ACP) in Ashtabula, Ohio. This is the first major Task Order that has been issued under the Office of Environmental Management's Nationwide Indefinite Delivery, Indefinite Quantity (ID/IQ) Multiple Award Contract, which pre-qualifies companies to do work for DOE's EM program. Assistant Secretary for Environmental Management James Rispoli said. "We

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

DOE Awards Research and Systems Engineering Task Order | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Research and Systems Engineering Task Order Research and Systems Engineering Task Order DOE Awards Research and Systems Engineering Task Order March 28, 2013 - 12:00pm Addthis Media Contact Bill Taylor, 803-952-8564 Bill.Taylor@srs.gov Cincinnati - The U.S. Department of Energy (DOE) today awarded a task order to The MITRE Corporation, of McLean Virginia. MITRE will provide research and development in support of DOE's Office of Environmental Management. The task order has an approximate value of $5.9 million, with an 18-month performance period, with nine-month base period and a nine-month option. The MITRE Corporation is a not-for-profit organization chartered to work for the interest of the public. MITRE manages the Internal Revenue Service Federally Funded Research and Development Center (FFRDC) Master Indefinite

342

Executive Orders Defining Tribal Relationships | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Executive Orders Defining Tribal Relationships Executive Orders Defining Tribal Relationships Executive Orders Defining Tribal Relationships Executive Order 13592 Improving American Indian and Alaska Native Educational Opportunities and Strengthening Tribal Colleges and Universities (2011). Superseded EO 13021 to ensure that all American Indian students, regardless of which institution they attend, receive support from the federal government at elementary through college levels. This EO also creates an Interagency Working Group on AI/AN Education to establish educational goals across the government. Executive Order 13096 American Indian and Alaska Education (1998). Directs federal agencies to improve the academic performance of American Indian and Alaska Native students via six goals: (1) improving reading and mathematics (2) increasing high school completion

343

Algorithms for discovering bucket orders from data  

Science Conference Proceedings (OSTI)

Ordering and ranking items of different types are important tasks in various applications, such as query processing and scientific data mining. A total order for the items can be misleading, since there are groups of items that have practically equal ... Keywords: bucket order, ordering, partial order, ranking

Aristides Gionis; Heikki Mannila; Kai Puolamki; Antti Ukkonen

2006-08-01T23:59:59.000Z

344

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

, 2004 , 2004 By the Numbers WIPP marks five-year anniversary Shipments scheduled to arrive at WIPP for the week of 4/4/04 - 4/10/04: 18 Total shipments received at WIPP: 2,456 Total volume disposed at WIPP: 19,042 m 3 FY04 Performance Metrics D E P A R T M E N T O F E N E R G Y U N I T E D S T A T ES O F A M E R I C A TeamWorks TeamWorks TRU A weekly e-newsletter for the Waste Isolation Pilot Plant team For those who endured the early morning cold of March 26, 1999, to witness WIPP's first shipment, it may seem like yesterday. Yet Friday marked five years of WIPP operations. Relative newcomer to WIPP - but not to the waste management industry - CBFO Deputy Manager Lloyd Piper observed, "The transformation from a facility in "standby" mode to operational mode has been nothing short of amazing."

345

ATTACHMENT 12 California-Based Entity (CBE) and/or Government Entity in California  

E-Print Network (OSTI)

PON-12-502 ATTACHMENT 12 California-Based Entity (CBE) and/or Government Entity in California Requirement Pursuant to AB 2267 (Fuentes, 2008), the California Energy Commission's Public Interest Energy Research Program must give a priority to "California-based entities" (CBEs) when making awards. An entity

346

Implementing Network File System Protocol for Highly Available Clustered Applications on Network Attached Storage  

Science Conference Proceedings (OSTI)

This paper introduces method for implementing NFS protocol for larger block/network packets transfer over to NAS [Network Attached Storage] from Highly Available clients. NAS storage scalability is habitually inadequate to the volume of the appliance. ... Keywords: NAS, NFS, RPC, RAID

K. J. Latesh Kumar

2013-09-01T23:59:59.000Z

347

Dissociative electron attachment to carbon dioxide via the ^2\\Pi_u shape resonance  

E-Print Network (OSTI)

Momentum imaging measurements from two experiments are presented and interpreted with the aid of new ab initio theoretical calculations to describe the dissociative electron attachment (DEA) dynamics. We address the problem of how the 4 eV ^2\\Pi_u shape resonance in CO_2 proceeds to dissociate to CO(^1\\Sigma^+) + O^-(^2P) by DEA.

Moradmand, A; Haxton, D J; Rescigno, T N; McCurdy, C W; Weber, Th; Matsika, Spiridoula; Landers, A L; Belkacem, A; Fogle, M

2013-01-01T23:59:59.000Z

348

Dynamic Simulation of Lightning Attachment to Earthed Overhead Transmission Line Structures  

Science Conference Proceedings (OSTI)

In this paper a novel method is presented to investigate lightning stroke attachment to earthed overhead transmission line structures. This method is based on the dynamic simulation of lightning downward leader movement toward the ground in three dimensions. ... Keywords: charge simulation method, downward leader, lightning, transmission line, upward leader

Mohammad Reza Bank Tavakoli; Behrooz Vahidi

2010-07-01T23:59:59.000Z

349

Demand reduction attachments for Aberdeen Proving Grounds, Aberdeen, Maryland. Final report  

Science Conference Proceedings (OSTI)

This group of attachments includes: Electric Rates and Riders; BGE Substation Requirements; Electric Utility Bills; BGE `Billing Interface Data`; Metering Data; Incremental Cost Calculations; Electric Submeter Readings; Natural Gas Bills LCCID Data; LCCID - Energy Escalation Values; Scope of Architect and Engineer Services; Interim Review Comments; Interim Review Responses; Interim Review Meeting Minutes; Telephone Conversation Minutes and Conversations; and Pre-Final Review Comments.

NONE

1996-06-01T23:59:59.000Z

350

Page 1 of 9 Attachment A PP/OP 05.09  

E-Print Network (OSTI)

Page 1 of 9 Attachment A PP/OP 05.09 1/29/2010 REQUEST FOR NATURAL GAS SUPPLY PROPOSAL Texas Tech Natural Gas Company or Oneok Gas Transportation LLC pipelines. SUPPLY AND DELIVERY All natural gas supply The following is submitted by the undersigned natural gas supply Vendor in response to Texas Tech University

Rock, Chris

351

Sintered Silver Joint Strength Dependence on Substrate Topography and Attachment Pad Geometry  

SciTech Connect

The sum of chemical and mechanical bonding limits the adhesive strength of die-attach and substrate-attach layers. This is also true for sintered silver joints whose development and employment are underway in the electronic packaging community. Chemical bonding is dictated by numerous parameters associated with the compatibility of the metallurgical bond of the two mating surfaces and the processing history that brings them together. However, the efficacy of mechanical bonding is likely affected by the topographies (e.g., roughness) of the two adjoined surfaces and also perhaps the shape of the attachment layer itself (e.g., circles, squares, and sizes thereof). In this study the mechanical bonding component is examined through the modification of the copper cladding surface on direct bonded copper (DBC) substrates, the shape of the silver pad attachment bonded to it, and the use of a joined 'DBC sandwich' that facilitates their study. It was found that simple employment of both surface topography control and printed pad geometry can affect and improve shear strength of silver sintered joints, and that there is logic to perhaps hybridize their effects. This is an important observation as more future attention is devoted to joining constituents with larger areas (> 100 mm2) in electronic packages.

Wereszczak, Andrew A [ORNL; Vuono, Daniel J [ORNL; Liang, Zhenxian [ORNL; Fox, Ethan E [ORNL

2012-01-01T23:59:59.000Z

352

General Grant Terms and Conditions Rev. January 10, 2012 (Attachment K)  

E-Print Network (OSTI)

General Grant Terms and Conditions Rev. January 10, 2012 (Attachment K) EXHIBIT C TERMS AND CONDITIONS PON-11-604 #12;i 46B TERMS AND CONDITIONS TABLE OF CONTENTS SECTION PAGE NO. U1.U UGrant AgreementU ............................................................................... 24 #12;General Grant Terms and Conditions Rev. January 10, 2012 1 TERMS AND CONDITIONS 1. 0BGrant

353

Protective interior wall and attaching means for a fusion reactor vacuum vessel  

DOE Patents (OSTI)

The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.

Phelps, R.D.; Upham, G.A.; Anderson, P.M.

1985-03-01T23:59:59.000Z

354

Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance  

SciTech Connect

Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

2011-08-17T23:59:59.000Z

355

No-migration variance petition. Volume 3, Revision 1: Appendix B, Attachments A through D  

Science Conference Proceedings (OSTI)

Volume III contains the following attachments: TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms (Appendix 2.10.12 of TRUPACT-II safety analysis report); and chemical compatibility analyses for waste forms across all sites.

Not Available

1990-03-01T23:59:59.000Z

356

On transfinite Knuth-Bendix orders  

Science Conference Proceedings (OSTI)

In this paper we discuss the recently introduced transfinite Knuth-Bendix orders. We prove that any such order with finite subterm coefficients and for a finite signature is equivalent to an order using ordinals below ??, that is, ...

Laura Kovcs; Georg Moser; Andrei Voronkov

2011-07-01T23:59:59.000Z

357

Oak Ridge Reservation Compliance Order, September 26, 1995 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Oak Ridge Reservation Compliance Order, September Oak Ridge Reservation Compliance Order, September 26, 1995 State Tennessee Agreement Type Compliance Order Legal Driver(s) FFCAct Scope Summary Enforce the Plan and ensure that the Respondent completes all work in accordance with the schedules contained in, and/or developed pursuant to, the Plan Parties DOE; Tennessee Department of Environment and Conservation Date 9/26/1995 SCOPE * Approve, with modifications made by TDEC, the "Proposed Site Treatment Plan for the Oak Ridge Reservation," hereafter known as the Plan. * Enforce the Plan and ensure that the Respondent completes all work in accordance with the schedules contained in, and/or developed pursuant to, the Plan. ESTABLISHING MILESTONES * Schedules are contained in the Plan.

358

Microsoft Word - FOR WEB Order, CA - OK, MINUS D'd MODELS - Trastar CA w PYMT INSTR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Trastar Inc. Trastar Inc. Respondent ) ) ) ) ) ) Case Number: 2013-SE-49003 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Trastar Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. Part 429. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me,

359

Microsoft Word - FOR WEB - PQL 27001 Order-CA-Pymt Instr based on RoyPac 33004.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

In the Matter of: P.Q.L., Inc., Respondent ) ) ) ) ) Case Number: 2013-CE-27001 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into by the U.S. Department of Energy ("DOE") and P.Q.L., Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. Part 429. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me,

360

Microsoft Word - FOR WEB - Royal Pacific 33004 based on Act One 49001 Order-CA-Pymt Instr  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Respondent ) ) ) ) ) Case Number: 2013-SE-33004 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into by the U.S. Department of Energy ("DOE") and Royal Pacific, Ltd. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements located at 10 C.F.R. Part 429. 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the facts before me, I find that the public interest would be served by adopting the Compromise Agreement,

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Lab 1 -Motor Spin Down Test The angular speed ! of a motor is governed by the rst order di erential equation  

E-Print Network (OSTI)

Lab 1 - Motor Spin Down Test PRE-LAB The angular speed ! of a motor is governed by the rst order di erential equation I _! + b! = 0 where I is the moment of inertia of the motor and attachments about the motor's axis and b is the linear viscous damping constant. a. The rate of the exponential decay of !t

Stanford University

362

President Truman Orders Development of Thermonuclear Weapon ...  

National Nuclear Security Administration (NNSA)

Weapon President Truman Orders Development of Thermonuclear Weapon January 31, 1950 Washington, DC President Truman Orders Development of Thermonuclear Weapon President...

363

Federal Energy Management Program: Executive Order 13514  

NLE Websites -- All DOE Office Websites (Extended Search)

514 to someone by E-mail Share Federal Energy Management Program: Executive Order 13514 on Facebook Tweet about Federal Energy Management Program: Executive Order 13514 on Twitter...

364

Federal Energy Management Program: Executive Order 13221  

NLE Websites -- All DOE Office Websites (Extended Search)

Fleet Reporting Executive Order 13221 Executive Order (E.O.) 13221, Energy Efficient Standby Power Devices, calls for Federal agencies to purchase products that use minimal...

365

Glimpse of heavy electrons reveals "hidden order"  

NLE Websites -- All DOE Office Websites (Extended Search)

Glimpse of heavy electrons reveals "hidden order" Glimpse of heavy electrons reveals "hidden order" The remarkable breakthrough helps validate theory behind the observed increase...

366

TRU TeamWorks  

NLE Websites -- All DOE Office Websites (Extended Search)

8, 2012 8, 2012 WIPP Quick Facts (As of 9-26-12) 10,849 Shipments received since opening (10,252 CH and 597 RH) 83,693 Cubic meters of waste disposed (82,394 CH and 299 RH) 162,472 Containers disposed in the underground (161,882 CH and 590 RH) Photo above right: CBFO Deputy Manager Ed Ziemianski presents a WIPP team with the Green Zia Program Silver Level Award from the New Mexico Environment Department on Aug. 15, 2012 in recognition of environmental initiatives. Shown right of Ziemianski is Farok Sharif, WTS President and General Manager. New WIPP Management and Operating Contractor to start October 1 Nuclear Waste Partnership LLC (NWP) will start work as the WIPP Management and Operating Contractor on Monday, October 1. WIPP receives Green Zia Award The Waste Isolation Pilot Plant (WIPP), the U.S. Department of Energy (DOE)

367

Working With FEERC  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms For Partnering Mechanisms For Partnering with the Fuels, Engines, and Emissions Research Center at the Oak Ridge National Laboratory Oak Ridge National Laboratory (ORNL) has a program designed to provide technology-based solutions to organizations ranging from startups to Fortune 100 companies to academic institutions. Underlying this philosophy is our belief that strong partnerships with U.S. industry are the best way to share technological know-how with the private sector. Regardless of the activity-entering into a Cooperative Research and Development Agreement (CRADA) or Work for Others (WFO) agreement, or interacting with an industry or university through other means-we are committed to outcomes that create beneficial opportunities for the external organization as well as

368

End of Month Working  

Gasoline and Diesel Fuel Update (EIA)

The level of gas in storage at the end of the last heating season (March The level of gas in storage at the end of the last heating season (March 31, 2000) was 1,150 billion cubic feet (Bcf), just above the 1995-1999 average of 1,139 Bcf. Underground working gas storage levels are currently about 8-9 percent below year-ago levels. In large part, this is because injection rates since April 1 have been below average. Storage injections picked up recently due to warm weather in the last half of October. The month of November is generally the last month available in the year for injections into storage. A cold November would curtail net injections into storage. If net injections continue at average levels this winter, we project that storage levels will be low all winter, reaching a level of 818 Bcf at the end of March, the lowest level since 1996

369

Work Force Restructuring Activities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Force Restructuring Activities Force Restructuring Activities December 10, 2008 Note: Current updates are in bold # Planned Site/Contractor HQ Approved Separations Status General * LM has finalized the compilation of contractor management team separation data for the end of FY07 actuals and end of FY08 and FY09 projections. LM has submitted to Congress the FY 2007 Annual Report on contractor work force restructuring activities. The report has been posted to the LM website. *LM conducted a DOE complex-wide data call to the Field and Operations offices for DOE Contractor Management teams to provide, by program, actual contractor separation data for the end of FY 2008 and projections for the end of FY 2009 and FY 2010. The data will be used to keep senior management informed of upcoming large WFR actions.

370

Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

DE-SOL-0003174 1 FOR OFFICIAL USE ONLY - SOURCE SELECTION SENSITIVE, SEE FAR 3.104-3 PERFORMANCE WORK STATEMENT (PWS) Emergency Operations Training Academy (EOTA) Support Services May 27, 2011 Draft 1.0 Introduction The U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA), Office of Emergency Operations (NA-40) requires support services in the development and delivery of training, exercises, and other related technical and administrative support services at the Emergency Operations Training Academy (EOTA) in Albuquerque, New Mexico. 2.0 Background NA-40's mission is to ensure that capabilities are in place to respond to any NNSA and DOE facility emergency. NA-40 is the nation's premier responder to any nuclear or radiological

371

COMMENTARY Making sustainability work  

E-Print Network (OSTI)

Todays economic theory usually neglects the role of nature and environment. To make sustainability work it is, however, essential to (re-)integrate nature into the standard concepts of economics, especially by incorporating natural factors into the production function. It must be acknowledged that economic growth is not (only) the result of technical change but is mainly caused by rising energy-inputs into the economy, and that this is necessarily followed by resource exhaustion and pollution. Therefore, nature must not only be taken into account as a central factor of production but also in the form of environmental quality which is the basis for human quality of life. A numeric example shows that a small, but steady decrease of yearly resource consumption is already apt to redirect the economy on a path of sustainable development. 1998 Elsevier Science B.V. All rights reserved. Keywords: Sustainable development; Economic theory of production; Economic growth; Technical change; Non-renewable resources

Hans Christoph Binswanger

1996-01-01T23:59:59.000Z

372

NSLS Committees | Interlock Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Interlock Working Group Charge The NSLS Interlock Working Group shall review all new construction and modification of NSLS and SDL personnel protection interlock systems. It is the...

373

Federal Energy Management Program: Executive Order 13423  

NLE Websites -- All DOE Office Websites (Extended Search)

Executive Order Executive Order 13423 to someone by E-mail Share Federal Energy Management Program: Executive Order 13423 on Facebook Tweet about Federal Energy Management Program: Executive Order 13423 on Twitter Bookmark Federal Energy Management Program: Executive Order 13423 on Google Bookmark Federal Energy Management Program: Executive Order 13423 on Delicious Rank Federal Energy Management Program: Executive Order 13423 on Digg Find More places to share Federal Energy Management Program: Executive Order 13423 on AddThis.com... Requirements by Subject Requirements by Regulation National Energy Conservation Policy Act Executive Order 13514 Energy Independence & Security Act Executive Order 13423 Energy Policy Act of 2005 Executive Order 13221 Energy Policy Act of 1992 Notices & Rules

374

Federal Utility Partnership Working Group Spring 2007 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEETING MEETING MAY 1-2, 2007 CAPE CANAVERAL, FLORIDA HOSTED BY: FLORIDA POWER AND LIGHT INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Spring 2007 meeting in Cape Canaveral, Florida on May 1-2. The meeting was hosted by Florida Power and Light (FPL) and was held at the Doubletree Oceanfront Cocoa Beach Hotel. A total of 86 individuals attended the meeting, including at least 11 new members. Organizations represented included 36 utility officials, 3 Federal Energy Management Program (FEMP) representatives, 19 Federal agency representatives, 5 National Laboratory representatives, and 24 representatives from energy-related organizations (see attached list of participants and corresponding organizations). The working group is a joint effort between FEMP and the

375

Federal Utility Partnership Working Group Fall 2006 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOVEMBER 1-2, 2006 NOVEMBER 1-2, 2006 SAN FRANCISCO, CA INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Fall 2006 meeting in San Francisco, CA, on November 1-2. The meeting was hosted by Pacific Gas & Electric's (PG&E). A total of 80 individuals attended the meeting, including 28 new members. Organizations represented included 25 utility officials, 8 Federal Energy Management Program (FEMP) representatives, 22 Federal agency representatives, 6 National Laboratory representatives, and 18 representatives from energy-related organizations (see attached list of participants and corresponding organizations). The working group is a joint effort between FEMP and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in

376

Exascale Hardware Architectures Working Group  

Science Conference Proceedings (OSTI)

The ASC Exascale Hardware Architecture working group is challenged to provide input on the following areas impacting the future use and usability of potential exascale computer systems: processor, memory, and interconnect architectures, as well as the power and resilience of these systems. Going forward, there are many challenging issues that will need to be addressed. First, power constraints in processor technologies will lead to steady increases in parallelism within a socket. Additionally, all cores may not be fully independent nor fully general purpose. Second, there is a clear trend toward less balanced machines, in terms of compute capability compared to memory and interconnect performance. In order to mitigate the memory issues, memory technologies will introduce 3D stacking, eventually moving on-socket and likely on-die, providing greatly increased bandwidth but unfortunately also likely providing smaller memory capacity per core. Off-socket memory, possibly in the form of non-volatile memory, will create a complex memory hierarchy. Third, communication energy will dominate the energy required to compute, such that interconnect power and bandwidth will have a significant impact. All of the above changes are driven by the need for greatly increased energy efficiency, as current technology will prove unsuitable for exascale, due to unsustainable power requirements of such a system. These changes will have the most significant impact on programming models and algorithms, but they will be felt across all layers of the machine. There is clear need to engage all ASC working groups in planning for how to deal with technological changes of this magnitude. The primary function of the Hardware Architecture Working Group is to facilitate codesign with hardware vendors to ensure future exascale platforms are capable of efficiently supporting the ASC applications, which in turn need to meet the mission needs of the NNSA Stockpile Stewardship Program. This issue is relatively immediate, as there is only a small window of opportunity to influence hardware design for 2018 machines. Given the short timeline a firm co-design methodology with vendors is of prime importance.

Hemmert, S; Ang, J; Chiang, P; Carnes, B; Doerfler, D; Leininger, M; Dosanjh, S; Fields, P; Koch, K; Laros, J; Noe, J; Quinn, T; Torrellas, J; Vetter, J; Wampler, C; White, A

2011-03-15T23:59:59.000Z

377

Order Module--DOE O 433.1B, MAINTENANCE MANAGEMENT PROGRAM FOR DOE NUCLEAR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

33.1B, MAINTENANCE MANAGEMENT PROGRAM FOR DOE 33.1B, MAINTENANCE MANAGEMENT PROGRAM FOR DOE NUCLEAR FACILITIES Order Module--DOE O 433.1B, MAINTENANCE MANAGEMENT PROGRAM FOR DOE NUCLEAR FACILITIES "The familiar level of this module is designed to summarize the basic information in DOE O 433.1B, Maintenance Management Program for DOE Nuclear Facilities. This Order canceled DOE O 433.1A. This module is divided into three sections. Section one contains the objective, general requirements, and the responsibilities assigned to field element managers. Section two includes the requirements in attachment 2 of the Order, Maintenance Management Program Requirements for DOE Nuclear Facilities. Section three is a summary of the guidance provided in DOE G 433.1-1, Facility Maintenance Management Program Guide for Use with DOE O 433.1.The

378

Accumulated waste characterization work plan  

Science Conference Proceedings (OSTI)

The Portsmouth Gaseous Diffusion Plant (PORTS) as part of the uranium enrichment complex produces enriched uranium for power generation and defense purposes. Since the beginning of diffusion plant operations in 1953, a variety of waste materials and excess equipment has been generated through both normal operations and as part of major system upgrade programs. However, as a result of the closure of former onsite radioactive management facilities and limited onsite and offsite disposal facilities for mixed (hazardous and radioactive) wastes, PORTS has accumulated large quantities of waste awaiting final disposition. These accumulated wastes were estimated in the Accumulated Waste Plan (AWP) to consist of some 21,700 containers of the radioactive, RCRA hazardous, PCB, mixed and asbestos wastes in various storage areas and process buildings with PORTS. In order to proper manage these wastes onsite and prepare for them for ultimate treatment or disposal, a detailed understanding of the waste contents and characteristics must be developed. The strategy for managing and disposing of these wastes was outlined in the AWP. The purpose of this Accumulated Waste Characterization Work Plan (AWCWP) is to provide a detailed plan for characterizing waste containers from the existing PORTS inventory. The AWCWP documents the process and analytical information currently available and describes statistically-based sampling and analyses required to support proper regulatory classification.

Not Available

1992-01-01T23:59:59.000Z

379

Will NIF Work  

E-Print Network (OSTI)

It is vital that new clean and abundant sources of energy be developed for the sustainability of modern society. Nuclear fusion of the hydrogen isotopes deuterium and tritium, if successful, might make a major contribution toward satisfying this need. The U.S. has an important effort aimed at achieving practical inertial confinement fusion, ICF, which has been under development for decades at the Lawrence Livermore National Laboratory. The National Ignition Facility (NIF) is a giant laser to multiply-shock and thus quasi-isentropically compress a capsule of deuterium-tritium (DT) to high density and temperature, where the fusion rate is proportional to density squared times temperature to the fourth power. The principal problem that must be solved for NIF to work successfully is elimination of the Rayleigh-Tailor (R-T) instability that originates from the interface between the solid shell and the DT fuel within it. The R-T instability poisons the fusion reaction by reducing the temperature of the DT achieved ...

Nellis, W J

2009-01-01T23:59:59.000Z

380

Attachment B  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B B : 22637 ~-'"~- ....... "D DOE024-0043 p.2 * CT - United States Department of the Interior 2800 (WY100) BUREAU OF LAND MANAGEMENT WYW-153987 Frncdalc Field Offce P.O. Box 768 Pincd.c. W 7 oming 82341-0768 October 25, 2001 CERTIIED MAIL 7000 0520 0021 8232 3869 RKEURN RECEIP REQUESTED DECISION Mr. Steven Degenfeldr : Double Eagle Petroleum & Mining Company : Application Received PO Box 766 October 9, 2001 Casper, WY 82602 pptcar on Rejectcd Re: Pipeline - Mesa 11-16 On October 9. 2001, you filed right-of-way aplication, WYW-153987, for a 4 inch temporary surface natural gas pipeline on lands in sections 21 an 22, T. 32 N-, R. 109 W., 6' Principle Meridian, Wyoming, under the authority of Section 28 of the Mineal Leasing act of 1920, as amended. It is Bureau of Land Management policy to reesw natural gas pipeline right-of-way applications with

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Attachment B?  

NLE Websites -- All DOE Office Websites (Extended Search)

for soil stabilization as contained in the POD and as described in the Stormwater Pollution Prevention Plan for the road reconstruction project. Implementation of these...

382

ATTACHMENT A  

NLE Websites -- All DOE Office Websites (Extended Search)

ENHANCING THE ENVIRONMENTAL PERFORMANCE OF COAL- ENHANCING THE ENVIRONMENTAL PERFORMANCE OF COAL- FIRED POWER PLANTS - DOE'S INNOVATIONS FOR EXISTING PLANTS PROGRAM Thomas J. Feeley, III Technology Manager Innovations for Existing Plants Program National Energy Technology Laboratory Office of Fossil Energy U.S. Department of Energy ABSTRACT The U. S. Department of Energy (DOE) has established a set of national priorities that includes the goal to promote secure, competitive, and environmentally responsible energy systems that serve the needs of the public. The Innovations for Existing Plants (IEP) program, managed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL), provides technological solutions to the myriad of environmental issues (air, solid, and water) affecting the existing fleet of coal-based

383

ATTACHMENT A  

NLE Websites -- All DOE Office Websites (Extended Search)

for Existing Plants Program National Energy Technology Laboratory Office of Fossil Energy U.S. Department of Energy ABSTRACT The U. S. Department of Energy (DOE) has...

384

Low work function thermionic emission materials  

DOE Green Energy (OSTI)

Thermionic energy conversion in a microminiature format shows potential as a viable, high efficiency, on-chip power source. Microminiature thermionic converters (MTC) with inter-electrode spacings on the order of microns are currently being prototyped and evaluated at Sandia. The remaining enabling technology is the development of low work function materials and processes than can be integrated into these converters. In this report, the authors demonstrate a method of incorporating thin film emitters into converters using rf sputtering. They find that the resultant films possess a minimum work function of 1.2 eV. Practical energy conversion is hindered by surface work function non-uniformity. They postulate the source of this heterogeneity to be a result of limited bulk and surface transport of barium. Several methods are proposed for maximizing transport, including increased film porosity and the use of metal terminating layers. They demonstrate a novel method for incorporating film porosity based on metal interlayer coalescence.

Zavadil, K.R.; King, D.B.; Ruffner, J.A.

1999-11-01T23:59:59.000Z

385

Work-Life Programs and Services  

Science Conference Proceedings (OSTI)

... NIST? Work Life Programs; Work Schedules. *. Bookmark and Share. Work-Life Programs and Services. Alternative ...

2011-09-22T23:59:59.000Z

386

Attachment I: Approval of Agreement-in-Principal with the State of Alaska |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

I: Approval of Agreement-in-Principal with the State of I: Approval of Agreement-in-Principal with the State of Alaska Attachment I: Approval of Agreement-in-Principal with the State of Alaska US Department of Energy Memorandum DATE: January 31, 1995 REPLY TO ATTN OF: EM-22 (C. Smoot, 202/586-2352) SUBJECT: Approval of Agreement-in-Principle with the State of Alaska TO: Manager, Nevada Operations Office Thank you for providing the draft Agreement-in-Principle with the State of Alaska for review and approval. I approve the execution of the Agreement-in-Principle and related grant, contingent on modification of the agreement to reflect the attached comments. Of special note, the agreement should be modified to include (1) language that requires state quarterly performance reporting as part of the grant requirements and (2) language

387

ATTACHMENT FLOODPLAIN STATEMENT OF FINDINGS FOR DEPARTMENT OF ENERGY LOAN GUARANTEE TO SEMPRA GENERATION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ATTACHMENT ATTACHMENT FLOODPLAIN STATEMENT OF FINDINGS FOR DEPARTMENT OF ENERGY LOAN GUARANTEE TO SEMPRA GENERATION FOR THE MESQUITE SOLAR ENERGY FACILITY NEAR GILLESPIE, ARIZONA The U.S. Department of Energy (DOE) has conducted an environmental assessment (EA) that analyzed the reasonably foreseeable environmental impacts associated with the nominal 400 megawatt (MW) photovoltaic solar power project and associated interconnection transmission line proposed by Sempra Generation (Sempra) for the Mesquite Solar Energy Facility (Mesquite) in Maricopa County, Arizona. The proposed project would utilize a photovoltaic (PV) solar panel technology that converts sunlight into direct current (DC) electricity. Inverters convert the DC power to alternating current (AC) power, and the AC power then flows to transformers

388

Attachment A: AIP Program Principles (Questions and Answers 1-12) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A: AIP Program Principles (Questions and Answers 1-12) A: AIP Program Principles (Questions and Answers 1-12) Attachment A: AIP Program Principles (Questions and Answers 1-12) AIP Program Principles This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying these requirements. Headquarters approval is required if mandatory language is not included in a new or renegotiated AIP. Question #1: Can States use AIP funds to support State regulatory activities? Answer: No, States cannot use AIP funds to support their regulatory activities. The Office of Management and Budget and the Department's congressional oversight committees have consistently indicated that the Environmental Protection Agency (EPA) and the states are required to use their current

389

Clip gage attachment for frictionless measurement of displacement during high-temperature mechanical testing  

DOE Patents (OSTI)

An attachment for placement between a test specimen and a remote clip gage extensometer providing improved fracture toughness tests of materials at elevated temperature is described. Using a cylindrical tube and axial rod in new relationship, the device transfers the displacement signal of the fracture toughness test specimen directly to a clip gage extensometer located outside the high temperature furnace. Virtually frictionless operation is assured by having the test specimen center one end of the rod in one end of the tube, while the clip gage extensometer arms center the other end of the rod in the other end of the tube. By providing positive control over both ends of both rod and tube, the attachment may be operated in orientations other than vertical. 1 figure.

Alexander, D.J.

1994-01-04T23:59:59.000Z

390

Executive Order 13592: Improving American Indian and Alaska Native  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

592: Improving American Indian and Alaska Native 592: Improving American Indian and Alaska Native Educational Opportunities and Strengthening Tribal Colleges and Universities (2011) Executive Order 13592: Improving American Indian and Alaska Native Educational Opportunities and Strengthening Tribal Colleges and Universities (2011) Superseded EO 13021 to ensure that all American Indian students, regardless of which institution they attend, receive support from the federal government at elementary through college levels. This EO also creates an Interagency Working Group on AI/AN Education to establish educational goals across the government. Executive Order 13592: Improving American Indian and Alaska Native Educational Opportunities and Strengthening Tribal Colleges and Universities (2011) More Documents & Publications

391

Name Title Work Phone Work E-Mail  

NLE Websites -- All DOE Office Websites (Extended Search)

12012 EOTA - STAFF Name Title Work Phone Work E-Mail Melissa Otero Program Manager 505-842-7112 motero@eota.energy.gov Janet Lee Online Learning Support Specialist 505-842-7110...

392

The Influence of Ion Implantation on cell Attachment to Glassy Polymeric Carbon  

SciTech Connect

In vitro biocompatibility tests have been carried out with model cell lines to demonstrate that near surface implantation of silver in Glassy Polymeric Carbon (GPC) can completely inhibit cell attachment on implanted areas while leaving adjacent areas unaffected. Patterned ion implantation permits precise control of tissue growth on medical applications of GPC. We have shown that silver ion implantation or argon ion assisted surface deposition of silver inhibits cell growth on GPC, a desirable improvement of current cardiac implants.

Zimmerman, R.; Ila, D. [Center for Irradiation of Materials, Alabama A and M University, Normal, AL (United States); Gurhan, I. [Ege University Faculty of Engineering, Izmir (Turkey); Ozdal-Kurt, F. [CBU Faculty of Science, Manisa (Turkey); Sen, B. H. [EU Faculty of Dentistry, Izmir (Turkey); Rodrigues, M. [University of Sao Paulo, Ribeirao Preto SP (Brazil)

2006-11-13T23:59:59.000Z

393

LLNS Beryllium Consent Order Fact Sheet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- LLNS Beryllium Consent Order - LLNS Beryllium Consent Order SUMMARY OF CONSENT ORDER In November 2010, the U.S. Department of Energy (DOE) and the National Nuclear Security Administration (NNSA) issued a consent order to Lawrence Livermore National Security, LLC (LLNS) for deficiencies related to LLNS's implementation of DOE's Chronic Beryllium Disease Prevention Program (CBDPP) regulation at Lawrence Livermore National Laboratory. The consent order requires LLNS to implement corrective actions that will ensure LLNS meets DOE requirements for assessing and controlling beryllium hazards and minimizes potential worker exposures to legacy beryllium hazards in Laboratory buildings. Under the terms of the consent order, LLNS agrees to implement corrective actions that address the

394

Federal Energy Management Program: Renewable Energy Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group Working Group The Renewable Energy Working Group provides a forum for Federal agencies and the renewable energy industry to exchange information on existing and planned projects, lessons learned, sources of project funds, and technologies. Guidance The Renewable Energy Working Group is charged with providing guidance about renewable energy regulatory requirements. Federal Renewable Energy Requirement Guidance Under EPAct 2005 and Executive Order 13423 Transmittal Letter Summarizing the Federal Renewable Energy Requirement Guidance Members Led by the Federal Energy Management Program, the Renewable Energy Working Group is made up of more than 100 Federal agency representatives, U.S. Department of Energy programs, and the renewable energy industry. Meetings

395

T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: Vulnerability in the PDF distiller of the BlackBerry 4: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server January 13, 2011 - 2:30pm Addthis PROBLEM: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server. PLATFORM: * BlackBerry Enterprise Server Express version 5.0.1 and 5.0.2 for Microsoft Exchange * BlackBerry Enterprise Server Express version 5.0.2 for IBM Lotus Domino * BlackBerry Enterprise Server versions 4.1.3 through 5.0.2 for Microsoft Exchange and IBM Lotus Domino * BlackBerry Enterprise Server versions 4.1.3 through 5.0.1 for Novell GroupWise * BlackBerry Professional Software version 4.1.4 for Microsoft Exchange and

396

File:Energy Data Jam - Attachment C.pdf | Open Energy Information  

Open Energy Info (EERE)

Jam - Attachment C.pdf Jam - Attachment C.pdf Jump to: navigation, search File File history File usage File:Energy Data Jam - Attachment C.pdf Size of this preview: 800 × 600 pixels. Go to page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Go! next page → next page → Full resolution ‎(1,500 × 1,125 pixels, file size: 2.31 MB, MIME type: application/pdf, 17 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 10:02, 10 July 2012 Thumbnail for version as of 10:02, 10 July 2012 1,500 × 1,125, 17 pages (2.31 MB) Graham7781 (Talk | contribs) You cannot overwrite this file. Edit this file using an external application (See the setup instructions for more information) File usage The following page links to this file:

397

Orientational order in concentrated suspensions of spherical microswimmers  

E-Print Network (OSTI)

We use numerical simulations to probe the dynamics of concentrated suspensions of spherical microswimmers interacting hydrodynamically. Previous work in the dilute limit predicted orientational instabilities of aligned suspensions for both pusher and puller swimmers, which we confirm computationally. Unlike previous work, we show that isotropic suspensions of spherical swimmers are also always unstable. Both types of initial conditions develop long-time polar order, of a nature which depends on the hydrodynamic signature of the swimmer but very weakly on the volume fraction up to very high volume fractions.

Arthur A. Evans; Takuji Ishikawa; Takami Yamaguchi; Eric Lauga

2013-02-10T23:59:59.000Z

398

Maintenance Work Management Improvement: Improving Culture and Work Process  

Science Conference Proceedings (OSTI)

EPRI's Plant Maintenance Optimization (PMO) mission is to develop and demonstrate products and services for improved use of power plant maintenance resources and increased profitability. Based on a series of work management improvement projects, EPRI plans to develop a best practices guideline. As part of this effort, this document details how to improve fossil power plant work culture and work processes.

1998-06-16T23:59:59.000Z

399

Generalized structure of higher order nonclassicality  

E-Print Network (OSTI)

A generalized notion of higher order nonclassicality (in terms of higher order moments) is introduced. Under this generalized framework of higher order nonclassicality, conditions of higher order squeezing and higher order subpoissonian photon statistics are derived. A simpler form of the Hong-Mandel higher order squeezing criterion is derived under this framework by using an operator ordering theorem introduced by us in [J. Phys. A. 33 (2000) 5607]. It is also generalized for multi-photon Bose operators of Brandt and Greenberg. Similarly, condition for higher order subpoissonian photon statistics is derived by normal ordering of higher powers of number operator. Further, with the help of simple density matrices, it is shown that the higher order antibunching (HOA) and higher order subpoissonian photon statistics (HOSPS) are not the manifestation of the same phenomenon and consequently it is incorrect to use the condition of HOA as a test of HOSPS. It is also shown that the HOA and HOSPS may exist even in absence of the corresponding lower order phenomenon. Binomial state, nonlinear first order excited squeezed state (NLESS) and nonlinear vacuum squeezed state (NLVSS) are used as examples of quantum state and it is shown that these states may show higher order nonclssical characteristics. It is observed that the Binomial state which is always antibunched, is not always higher order squeezed and NLVSS which shows higher order squeezing does not show HOSPS and HOA. The opposite is observed in NLESS and consequently it is established that the HOSPS and HOS are two independent signatures of higher order nonclassicality

Amit Verma; Anirban Pathak

2009-01-21T23:59:59.000Z

400

GreenOrder | Open Energy Information  

Open Energy Info (EERE)

Place New York, New York Zip 10016 Product Founded in 2000, GreenOrder is a sustainability strategy and marketing firm References GreenOrder1 LinkedIn Connections...

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Evaluating Heuristic Optimization Phase Order Search Algorithms  

Science Conference Proceedings (OSTI)

Program-specific or function-specific optimization phase sequences are universally accepted to achieve better overall performance than any fixed optimization phase ordering. A number of heuristic phase order space search algorithms have been devised ...

Prasad A. Kulkarni; David B. Whalley; Gary S. Tyson

2007-03-01T23:59:59.000Z

402

Higher Order Temporal Correlation Measured Using Up ...  

Science Conference Proceedings (OSTI)

... NIST. The results were published in Optics Express and include an animation showing the fourth order coloration. Lijun ...

2012-08-20T23:59:59.000Z

403

Executive Order 13423- Strengthening Federal Environmental, Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

423- Strengthening Federal Environmental, Energy, and Transportation Management Executive Order 13423- Strengthening Federal Environmental, Energy, and Transportation Management It...

404

Higher order invariants, cohomology, and automorphic forms  

E-Print Network (OSTI)

A general structure theorem on higher order invariants is proven. For an arithmetic group, the structure of the corresponding Hecke module is determined. It is shown that the module does not contain any irreducible submodule. This explains the fact that L-functions of higher order forms have no Euler-product. Higher order cohomology is introduced, classical results of Borel are generalized and a higher order version of Borel's conjecture is stated.

Deitmar, Anton

2008-01-01T23:59:59.000Z

405

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form #: Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers mitigate the radiological hazards introduced by the proposed work? Yes No (b) Can the closed state of the beam line injection stoppers be assured during the proposed work (ie., work does NOT involve injection stoppers or associated HPS)? Yes No If the answers to both questions are yes, the work can be performed safely under an SSRL RSWCF. If the answer to either question is no, then the work must be performed under a SPEAR3 RSWCF. Section 1: Description of work to be done, including date and time. (Person Responsible completes section)

406

The Work for Others Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

were granted the authority to perform work for others by the Atomic Energy Act of 1954 Public Law 83-703; 42 USC 2053. Work For Others programs at the DOE national...

407

How does the brain work?  

NLE Websites -- All DOE Office Websites (Extended Search)

Conceptually though it's a widget to get folks from where they live to where they work, and it works by figuring out the paths they take, assigning trains to those routes,...

408

Additive decomposition of fuzzy pre-orders  

Science Conference Proceedings (OSTI)

Fuzzy pre-orders (reflexive and min-transitive fuzzy relations) constitute an important class of fuzzy relations. By means of an indifference generator, a fuzzy pre-order can be decomposed additively into two parts: an indifference relation and a strict ... Keywords: Transitivity, Frank t-norm, Fuzzy pre-order, Indifference generator, Indifference relation, Nilpotent minimum, Strict preference relation

Susana Daz; Bernard De Baets; Susana Montes

2007-04-01T23:59:59.000Z

409

Higher-order symbolic execution via contracts  

Science Conference Proceedings (OSTI)

We present a new approach to automated reasoning about higher-order programs by extending symbolic execution to use behavioral contracts as symbolic values, thus enabling symbolic approximation of higher-order behavior. Our approach is based on the idea ... Keywords: higher-order contracts, reduction semantics, symbolic execution

Sam Tobin-Hochstadt; David Van Horn

2012-11-01T23:59:59.000Z

410

Order and Resolution for Computational Ocean Dynamics  

Science Conference Proceedings (OSTI)

An ocean flow that has all its scales resolved on a model grid can be more efficiently calculated to within a required accuracy by using high-order numerics than by grid refinement with low-order numerics. The differencing order must be at least ...

Brian G. Sanderson

1998-06-01T23:59:59.000Z

411

Live Work Guide for Substations  

Science Conference Proceedings (OSTI)

Live work (work on energized circuits) is the preferred method of maintenance where system integrity, system reliability, and operating revenues are at a premium and removal of a circuit or a substation from service is not acceptable. Live work (LW) may also be beneficial in construction and storm damage repair. Furthermore, live work may be unavoidable in the case of substations that serve essential facilities such as hospitals, law enforcement, fire departments, and intrusion alarms if standby local ge...

2004-10-28T23:59:59.000Z

412

Task Order Awarded for Technical and Safety Support Services | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Safety Support Services and Safety Support Services Task Order Awarded for Technical and Safety Support Services December 20, 2012 - 12:00pm Addthis Media Contact Bill Taylor, 803-952-8564 bill.taylor@srs.gov Cincinnati - The Department of Energy (DOE) today awarded a contract for technical support services to Link Technologies, Inc., of Germantown, MD for support services to the DOE Office of Environmental Management in Washington D.C. The contract or task order was a competitive small business set-aside for time-and-materials with an approximate value of $10 million, with a one-year performance period and two additional one-year options. Services to be performed under the task order include: Assess engineering, technical work, and project performance Assess quality assurance of projects managed by field elements

413

Infinite order decompositions of C$^*$-algebras  

E-Print Network (OSTI)

In the given article infinite order decompositions of C*-algebras are investigated. It is proved that for the infinite order decomposition of a C*-algebra A with respect to an infinite orthogonal set of projections of A, if the diagonal components of the infinite order decomposition are von Neumann algebras then the infinite order decomposition is a von Neumann algebra. Also, it is proved that, if a C*-algebra A with an infinite orthogonal set of projections such, that the least upper bound of this set is 1, is not a von Nemann algebra, projections of the set are pearwise equivalent then A does not coincide with its infinite order decomposition, and, if the infinite order decomposition is not weakly closed then this infinite order decomposition is not a C*-algebra.

Arzikulov, F N

2011-01-01T23:59:59.000Z

414

Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

40.1B, WORKER PROTECTION PROGRAM FOR DOE 40.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES The familiar level of this module is divided into two sections. In the first section, we will discuss the objective, requirements, and the responsibilities assigned to the heads of field elements. In the second section, we will discuss the content of attachment 1, Functional Area Requirements. We have provided examples and a practice to help familiarize you with the material. The practice will also help prepare you for the criterion test. DOE Order Self Study Modules - DOE O 440.1B, Worker Protection Management for DOE (Including the National Nuclear Security Administration) Federal Employees

415

July 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview Accomplishments: 1. Progress on the completion of the 10 CFR 1046 modifications to address barriers to workforce retention. Written response to public comment is being drafted by HS-51. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - anticipated completion no later than September, assuming timely OMB review and approval. 2. Draft PF Working Group charter final review by senior management to be

416

Influence of co-attached aromatics on the thermolysis of surface-immobilized 1,3-diphenylpropane  

SciTech Connect

The technique of model compound immobilization by covalent surface attachment is being employed to investigate the potential impact of restricted diffusional mobility on the thermal reactivity of coal. This restricted mobility may be imposed in coal as a consequence of its cross-linked, macromolecular structure. Thermolysis studies at 345--400{degree}C of model coal structures covalently attached to a silica surface have shown that significant perturbations in free-radical reaction mechanisms can occur, and result in altered reaction rates and product distributions compared with corresponding fluid phase behavior. In the current study, we are beginning to probe the influence of the structure of co-attached aromatic molecules such as biphenyl and diphenylmethane on the reaction rate and regioselectivity in the thermolysis of surface-attached 1,3-diphenylpropane. 6 refs., 1 tab.

Buchanan, A.C. III; Britt, P.F.; Biggs, C.A. (Oak Ridge National Lab., TN (USA))

1989-01-01T23:59:59.000Z

417

Subseabed Disposal Program Plan. Volume II. FY80 budget and subtask work plans  

Science Conference Proceedings (OSTI)

This volume of the Subseabed Disposal Program Plan presents a breakdown of the master program structure by major activity. Each activity is described and accompanied by a specific cost plan schedule and a milestone plan. The costs have been compiled in the Cost Plan Schedules attached to each Subtask Work Plan. The FY 1980 budget for the Subseabed Disposal Program is summarized at the second level of the Work Breakdown Structure. The milestone plans for FY 80 are presented. The milestones can be changed only with the concurrence of the Sandia Subseabed Program Manager.

Not Available

1980-01-01T23:59:59.000Z

418

ABSTRACT REQUESTER CONTRACT SCOPE OF WORK RATIONAL FOR DECISION DISPOSITION  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WAIVER ACTION - WAIVER ACTION - ABSTRACT REQUESTER CONTRACT SCOPE OF WORK RATIONAL FOR DECISION DISPOSITION General Motors Conduct research, development and Cost Sharing 20 percent Recommended Corporation testing of 30 KW proton-exchange- membrane (PEM) fuel cell propulsion systems 0 STATEMENT OF CONSIDERATIONS REQUEST BY GENERAL MOTORS CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS UNDER CONTRACT NO. DE-AC02-90CH10435, W(A)-90- 056, CH-0663 The Allison Gas Turbine Division of the General Motors Corporation (hereafter GM), a large business, has petitioned for an advance waiver of patent rights under DOE Contract No. DE-AC02- 90CH10435. The contract, yet to be definitized, resulted from an RFP issued in January 1990. As set out in the attached waiver petition, GM has requested that domestic and foreign title to

419

DOE O 484.1 Admin Chg 1, Reimbursable Work for the Department of Homeland Security  

Directives, Delegations, and Requirements

The Order establishes DOE policies and procedures for the acceptance, performance, and administration of reimbursable work directly funded by the Department of ...

2006-08-17T23:59:59.000Z

420

Healthy Housing Opportunities During Weatherization Work  

SciTech Connect

In the summer and early fall of 2010, the National Center for Healthy Housing interviewed people from a selection of state and local agencies that perform weatherizations on low-income housing in order to gauge their approach to improving the health and safety of the homes. The interviews provided a strong cross section of what work agencies can do, and how they go about funding this work when funds from the Weatherization Assistance Program (WAP) do not cover the full extent of the repairs. The report also makes recommendations for WAP in how to assist agencies to streamline and maximize the health and safety repairs they are able to make in the course of a standard weatherization.

Wilson, J.; Tohn, E.

2011-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Annual work plan for FY 1992  

SciTech Connect

The Office of Inspector General (OIG) has an overall mission to prevent and detect fraud, waste, and mismanagement in Department of Energy (DOE) programs. As part of its responsibility in accomplishing its mission, the DOE Office of Audits publishes an Annual Work Plan'' in September of each year. The prime focus of the plan is to identify opportunities for audits to enhance the effectiveness, efficiency, and integrity of the DOE's programs and operations. Through this plan, we are able to maximize the effectiveness of our resources and to avoid duplicating audit coverage being provided by other audit groups, such as the US General Accounting Office (GAO) to US Department of Energy programs. Such planning is required by Office of Management and Budget Circular A-73 and DOE Order 2321.1A. This work plan, includes those audits that are to be carried over from Fiscal Year 1991 and those that are to be started during Fiscal year 1992.

Not Available

1991-09-30T23:59:59.000Z

422

Attachments for fire modeling for Building 221-T, T Plant canyon deck and railroad tunnel  

SciTech Connect

The purpose of this attachment is to provide historical information and documentation for Document No. WHC-SD-CP-ANAL-008 Rev 0, ``Fire Modeling for Building 221-T--T Plant Canyon Deck and Railroad Tunnel``, dated September 29, 1994. This data compilation contains the following: Resumes of the Technical Director, Senior Engineer and Junior Engineer; Review and Comment Record; Software Files; CFAST Input and Output Files; Calculation Control Sheets; and Estimating Sprinkler Actuation Time in the Canyon and Railroad Tunnel. The T Plant was originally a fuel reprocessing facility. It was modified later to decontaminate and repair PuRex process equipment.

Oar, D.L. [Westinghouse Hanford Co., Richland, WA (United States)

1995-01-23T23:59:59.000Z

423

Fiber-optic strain gauge with attached ends and unattached microbend section  

DOE Patents (OSTI)

A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system. 5 figs.

Weiss, J.D.

1992-07-21T23:59:59.000Z

424

Fiber-optic strain gauge with attached ends and unattached microbend section  

DOE Patents (OSTI)

A strain gauge is made of an optical fiber into which quasi-sinusoidal microbends have been permanently introduced. The permanent microbends cause a reduction in the fiber's optical transmission, but, when the gauge is attached to a substrate that is subsequently strained, the amplitude of the deformations will diminish and the optical transmission through the fiber will increase. An apparatus and process for manufacturing these microbends into the optical fiber through a heat-set process is employed; this apparatus and process includes a testing and calibration system.

Weiss, Jonathan D. (Albuquerque, NM)

1992-01-01T23:59:59.000Z

425

Fragility tests of welded attachments as compared to ASME Code Case N-318  

SciTech Connect

This paper presents the results from a series of fragility tests to assess the capacity of integral welded pipe attachments of various configurations. Both limit load and fatigue tests were performed on rectangular lugs and crosses (cruciforms) on straight pipe. The results of the limit load tests are presented as a limit moment. The results of the fatigue tests are cycles-to-failure. Markl`s equation is then used to determine stress intensification factors. The limit moments and stress intensification factors are then compared to those developed using the methodology of ASME Code Case N-318 to determine the level of conservatism in the Code Case.

Rawls, G.B. [Westinghouse Savannah River Co., Aiken, SC (United States); Wais, E.A. [Wais and Associates, Inc., Atlanta, GA (United States); Rodabaugh, E.C. [Rodabaugh (E.C.) and Associates, Hilliard, OH (United States)

1990-12-31T23:59:59.000Z

426

Fragility tests of welded attachments as compared to ASME Code Case N-318  

SciTech Connect

This paper presents the results from a series of fragility tests to assess the capacity of integral welded pipe attachments of various configurations. Both limit load and fatigue tests were performed on rectangular lugs and crosses (cruciforms) on straight pipe. The results of the limit load tests are presented as a limit moment. The results of the fatigue tests are cycles-to-failure. Markl's equation is then used to determine stress intensification factors. The limit moments and stress intensification factors are then compared to those developed using the methodology of ASME Code Case N-318 to determine the level of conservatism in the Code Case.

Rawls, G.B. (Westinghouse Savannah River Co., Aiken, SC (United States)); Wais, E.A. (Wais and Associates, Inc., Atlanta, GA (United States)); Rodabaugh, E.C. (Rodabaugh (E.C.) and Associates, Hilliard, OH (United States))

1990-01-01T23:59:59.000Z

427

System and method for changing a glove attached to a glove box  

DOE Patents (OSTI)

A system for changing the gloves of a glove box. The system requires the use of a new glove and a glove change ring to form a temporary secondary barrier to the exchange of atmospheres between the inner glove box and the room in which the glove box is operated. The system describes specific means for disengaging a used glove from the glove box port. The means for disengaging the used glove include use of a glove change hook and use of a glove with an attached tab for use in removal. A method for changing the gloves of a glove box is also described.

Aluisi, Alan (Aruada, CO)

2001-01-01T23:59:59.000Z

428

FACT SHEET: BIOENERGY WORKING GROUP  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 1 FACT SHEET: BIOENERGY WORKING GROUP At the Clean Energy Ministerial in Washington, D.C. on July 19 th and 20 th , ministers launched a Bioenergy Working Group, which will advance the deployment of bioenergy technologies by implementing recommendations of the Technology Action Plan on Bioenergy Technologies that was released by the Major Economies Forum Global Partnership in December 2009. The Working Group will work in close cooperation with the Global Bioenergy Partnership (GBEP), which is co-chaired by Brazil and Italy. Initial key activities of the Working Group include: 1. Global Bioenergy Atlas: The Working Group will combine and build upon existing databases of sustainably-developed bioenergy potential around the globe and make it available in an open web-

429

An overview of task order 10  

DOE Green Energy (OSTI)

Task Order 10 formalizes a collaboration in high explosive pulsed power (HEPP) experiments between LANL and VNIIEF. The focus is the VNIIEF disk explosive magnetic generator (DEMG) technology. The task order outlines a sequence of tasks and deliverables culminating in an experiment which takes place in the US utilizing US explosives and a Russian DEMG. This talk summarizes task order 10. It gives a brief history and present status in terms of the proposed high pressure EOS experiment (ALT-3).

Rousculp, Christopher L [Los Alamos National Laboratory

2011-01-12T23:59:59.000Z

430

Order-of-Magnitude Influence Diagrams  

E-Print Network (OSTI)

In this paper, we develop a qualitative theory of influence diagrams that can be used to model and solve sequential decision making tasks when only qualitative (or imprecise) information is available. Our approach is based on an order-of-magnitude approximation of both probabilities and utilities and allows for specifying partially ordered preferences via sets of utility values. We also propose a dedicated variable elimination algorithm that can be applied for solving order-of-magnitude influence diagrams.

Marinescu, Radu

2012-01-01T23:59:59.000Z

431

ICDF Complex Remedial Action Work Plan  

SciTech Connect

This Remedial Action Work Plan provides the framework for operation of the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility Complex (ICDF). This facility includes (a) an engineered landfill that meets the substantial requirements of DOE Order 435.1, Resource Conservation and Recovery Act Subtitle C, Idaho Hazardous Waste Management Act, and Toxic Substances Control Act polychlorinated biphenyl landfill requirements; (b) centralized receiving, inspections, administration, storage/staging, and treatment facilities necessary for CERCLA investigation-derived, remedial, and removal waste at the Idaho National Laboratory (INL) prior to final disposition in the disposal facility or shipment off-Site; and (c) an evaporation pond that has been designated as a corrective action management unit. The ICDF Complex, including a buffer zone, will cover approximately 40 acres, with a landfill disposal capacity of approximately 510,000 yd3. The ICDF Complex is designed and authorized to accept INL CERCLA-generated wastes, and includes the necessary subsystems and support facilities to provide a complete waste management system. This Remedial Action Work Plan presents the operational approach and requirements for the various components that are part of the ICDF Complex. Summaries of the remedial action work elements are presented herein, with supporting information and documents provided as appendixes to this work plan that contain specific detail about the operation of the ICDF Complex. This document presents the planned operational process based upon an evaluation of the remedial action requirements set forth in the Operable Unit 3-13 Final Record of Decision.

W. M. Heileson

2006-12-01T23:59:59.000Z

432

Robotic Technologies for Live Working  

Science Conference Proceedings (OSTI)

The objective of this report is to review selected available robotic technologies and evaluate their possible applicability to live working. The selection criteria for robotic technologies included suitability for operation in a high-voltage environment; mechanical load capacity; and extent of reach, size, and weight compatible with live work applications. The report provides a brief history of robotics in live work dating back to late 1970s and the development of the EPRI TOMCAT (Teleoperator for Operat...

2010-12-23T23:59:59.000Z

433

Engineered Solutions: Order (2010-CE-2112)  

Energy.gov (U.S. Department of Energy (DOE))

DOE issued an Order after entering into a Compromise Agreement with Engineered Solutions, Inc. to resolve a case involving the failure to certify dehumidifier basic model SD109.

434

Hierarchically Ordered Porous Carbon Films for Commercial ...  

for kinetic adsorption. The ORNL invention offers both a method for making new, hierarchically ordered porous carbon films and describes a capacitive deionization

435

Executive Order 13514: Implementation Status Update  

NLE Websites -- All DOE Office Websites (Extended Search)

Larry Stirling Office of Environmental Policy & Assistance (HS-22) Environmental Sustainability Network February 18, 2010 Executive Order 13514 (October 5, 2009) "To establish an...

436

Federal Energy Management Program: Executive Order 13221  

NLE Websites -- All DOE Office Websites (Extended Search)

221 Executive Order (E.O.) 13221, Energy Efficient Standby Power Devices, calls for Federal agencies to purchase products that use minimal standby power when possible. It was...

437

High order Parzen windows and randomized sampling.  

E-Print Network (OSTI)

???In the thesis, high order Parzen windows are studied for understanding some algorithms in learning theory and randomized sampling in multivariate approximation. Our ideas are (more)

Zhou, Xiangjun (???)

2009-01-01T23:59:59.000Z

438

?1 Minimization via Randomized First Order Algorithms  

E-Print Network (OSTI)

In this paper we propose randomized first-order algorithms for solving bilinear ...... does not require knowledge of ?) is not worse that the theoretically optimal...

439

QUADRATIC ORDER CONDITIONS FOR BANG-SINGULAR ...  

E-Print Network (OSTI)

First, we obtain second order necessary optimality conditions. Secondly, we get a ... enters linearly, is that the corresponding second variation does not contain.

440

September 2012, Work Force Retention Work Group Status Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Work Force Retention Work Group Status Overview Work Force Retention Work Group Status Overview 2 Subgroups: Pro-Force and Non-Pro-Force Pro-Force Subgroup: Accomplishments: 1. Completion of 10 CFR 1046 [Protective Force Personnel Medical, Physical Readiness, Training, and Access Authorization Standards] as a final rule that includes modification efforts to address barriers to workforce retention. 2. Pro-Force (PF) union representative, Randy Lawson, identified this accomplishment as the single most significant step toward PF workforce retention in over 20 years. 3. Draft re-charter of PF Career Options Committee (PFCOC) to establish a PF Working Group approved by GC-63 and GC NNSA. Near Term Goals and Activities: 1. Publish 1046 as a final rule - publication anticipated this month.

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Radiation Safety Work Control Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiation Safety Work Control Form (see instructions on pg-2) Rev July-2012 Area: Form : Date: Preliminary Applicability Screen: (a) Will closing the beam line injection stoppers...

442

Construction Work in Progress (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

This Act allows nuclear power plants to qualify for recovery of Construction Work in Progress (CWIP) and other preconstruction expenditures in rates. Previously, nuclear power plants were excluded...

443

Work Family Community, Human Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Work-Life Balance Programs Adoption Assistance Program Benefits Blood Drives Brookhaven Employee's Recreation Association (BERA) Brookhaven Retired Employee Association (BREA)...

444

An unsupervised language independent method of name discrimination using second order co-occurrence features  

Science Conference Proceedings (OSTI)

Previous work by Pedersen, Purandare and Kulkarni (2005) has resulted in an unsupervised method of name discrimination that represents the context in which an ambiguous name occurs using second order cooccurrence features. These contexts are then ...

Ted Pedersen; Anagha Kulkarni; Roxana Angheluta; Zornitsa Kozareva; Thamar Solorio

2006-02-01T23:59:59.000Z

445

Small Business TerranearPMC Awarded $2 Million Task Order | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TerranearPMC Awarded $2 Million Task Order TerranearPMC Awarded $2 Million Task Order Small Business TerranearPMC Awarded $2 Million Task Order July 5, 2013 - 10:45am Addthis TerranearPMC at work on anomaly sampling in the 300 Area of Hanford. TerranearPMC at work on anomaly sampling in the 300 Area of Hanford. TerranearPMC is no stranger to working with the government. These graduates of the Department's Mentor Protégé Program founded their company with eye towards working in federal marketplace, with employees who had background in government contracting and some initial business savvy in what the agencies needed. Their insight paid off again last month, when the Office of Environmental Management awarded them a $2 million task order for technical support services. Spanning two years and a one year option extension, this

446

Transuranic Waste Transportation Working Group Agenda | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda Transuranic Waste Transportation Working Group Agenda More Documents & Publications...

447

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL  

Office of Legacy Management (LM)

WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL WORK PLAN FOR ENVIRONMENTAL RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND RESTORATION OF THE DOE MOUND SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH SITE, THE MOUND 2000 APPROACH FEBRUARY 1999 Final (Revision 0) Department of Energy Babcock & Wilcox of Ohio Mr. Daniel Bird AICP, Planning Manager Miamisburg Mound Community Improvement Corporation 720 Mound Road Miamisburg, Ohio 45342-6714 Dear Mr. Bird: The Core Team, consisting of the U.S. Department of Energy Miamisburg Environmental Management Project (DOE-MEMP), U.S. Environmental Protection Agency (USEPA), and the Ohio Environmental Protection Agency (OEPA), appreciates your comments on the Work

448

Partial Word Order Freezing in Dutch  

Science Conference Proceedings (OSTI)

Dutch allows for variation as to whether the first position in the sentence is occupied by the subject or by some other constituent, such as the direct object. In particular situations, however, this commonly observed variation in word order is `frozen' ... Keywords: Bidirectional Optimality Theory, Corpus study, Definiteness, Variation, Word order freezing

Gerlof J. Bouma; Petra Hendriks

2012-01-01T23:59:59.000Z

449

Exhaustive Optimization Phase Order Space Exploration  

Science Conference Proceedings (OSTI)

The phase-ordering problem is a long standing issue for compiler writers. Most optimizing compilers typically have numerous different code-improving phases, many of which can be applied in any order. These phases interact by enabling or disabling opportunities ...

Prasad A. Kulkarni; David B. Whalley; Gary S. Tyson; Jack W. Davidson

2006-03-01T23:59:59.000Z

450

Texas Union Pizza Order Form ROOM RESERVED ______________________________________________________  

E-Print Network (OSTI)

#12;#12;Texas Union Pizza Order Form ROOM RESERVED: ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ ________________________________________________________________________________________________ Pick-up All orders are to be picked up at the Texas Union Hospitality Center desk in the south end West with the Texas Union Policies and Procedures. I understand that I will be held responsible for any debts incurred

Texas at Austin, University of

451

Complete Orders, Categories and Lattices of Approximations  

Science Conference Proceedings (OSTI)

The present article deals with the problem whether and how the bilattice orderings of knowledge ⩽$_k$ and truth ⩽$_t$ might enrich the theory of rough sets. Passing to the chief idea of the paper, we develop a bilattice-theoretic generalisation ... Keywords: *-autonomous category, Chu construction, Nelson lattice, approximation, bilattice, complete partial order, rough set

Marcin Wolski

2006-09-01T23:59:59.000Z

452

Complexity of the higher order matching  

Science Conference Proceedings (OSTI)

We use the standard encoding of Boolean values in simply typed lambda calculus to develop a method of translating SAT problems for various logics into higher order matching. We obtain this way already known NP-hardness bounds for the order two and three ...

Tomasz Wierzbicki

1999-07-01T23:59:59.000Z

453

Nevada National Security Site Environmental Report 2011 Attachment A: Site Description  

SciTech Connect

This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Cathy Wills, ed.

2012-09-12T23:59:59.000Z

454

Nevada National Security Site Environmental Report 2012 Attachment A: Site Description  

Science Conference Proceedings (OSTI)

This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

Wills, Cathy A

2013-09-11T23:59:59.000Z

455

The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage  

Science Conference Proceedings (OSTI)

On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

2012-02-03T23:59:59.000Z

456

The future of crowd work  

Science Conference Proceedings (OSTI)

Paid crowd work offers remarkable opportunities for improving productivity, social mobility, and the global economy by engaging a geographically distributed workforce to complete complex tasks on demand and at scale. But it is also possible that crowd ... Keywords: crowd work, crowdsourcing, organization design, research vision

Aniket Kittur; Jeffrey V. Nickerson; Michael Bernstein; Elizabeth Gerber; Aaron Shaw; John Zimmerman; Matt Lease; John Horton

2013-02-01T23:59:59.000Z

457

FY 1994 Annual Work Plan  

SciTech Connect

This is the third Office of Inspector General (OIG)Annual Work Plan. Its purpose is to summarize work completed in Fiscal Year (FY) 1993, identify ongoing projects from previous fiscal years which the OIG intends to continue into FY 1994, and announce planned projects which the OIG intends to begin in FY 19994.

Not Available

1993-10-01T23:59:59.000Z

458

Public Order and Safety | Open Energy Information  

Open Energy Info (EERE)

Order and Safety Order and Safety Jump to: navigation, search Building Type Public Order and Safety Definition Buildings used for the preservation of law and order or public safety. Sub Categories police station; fire station; jail, reformatory, or penitentiary; courthouse or probation office References EIA CBECS Building Types [1] References ↑ EIA CBECS Building Types U.S. Energy Information Administration (Oct 2008) Retrieved from "http://en.openei.org/w/index.php?title=Public_Order_and_Safety&oldid=270119" Category: CBECS Building Types What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 1863505291 Varnish cache server

459

Nanoscale Ordered MAterials Diffractometer Workshop (NOMAD 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Ordered MAterials Diffractometer Workshop Nanoscale Ordered MAterials Diffractometer Workshop NOMAD 2011 September 12 - 13, 2011 High-Flux Isotope Reactor * Spallation Neutron Source * Oak Ridge National Laboratory About the Workshop Contact Information Important Dates Application Form Sample Description NOMAD at SNS filler About the Workshop The acronym NOMAD stands for Nanoscale Ordered MAterials Diffractometer. It is a diffractometer located at the Spallation Neutron Source and is designed for the determination of pair distribution functions from a wide range of materials spanning from dense gases to long range ordered crystalline materials. It combines a large accessible Q range, large detector coverage with high intensity while maintaining good resolution. For a typical sample of the order of ~0.5cm3 good statistical accuracy can be achieved in minutes or even seconds of data acquisition time.

460

Order of Magnitude Reasoning using Logarithms  

E-Print Network (OSTI)

Converting complex equations into simpler, more tractable equations usually involves approximation. Approximation is usually done by identifying and removing insignificant terms, while retaining significant ones. The significance of a term can be determined by order of magnitude reasoning. In this paper we describe NAPIER, an implemented order of magnitude reasoning system. NAPIER defines the order of magnitude of a quantity on a logarithmic scale, and uses a set of rules to propagate orders of magnitudes through equations. A novel feature of NAPIER is the way it handles non-linear simultaneous equations, using linear programming in conjunction with backtracking. We show that order of magnitude reasoning in NAPIER is, in general, intractable and then discuss an approximate reasoning technique that allow it to run fast in practice. Some of NAPIER's inference rules are heuristic, and we estimate the error introduced by their use. 1 INTRODUCTION Mathematical models ...

P. Pandurang Nayak

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

file://\\Bellview\TeamWorks\TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

8/03 TRU TeamWorks will resume printing on January 8, 2004 | Shipments expected this we 8/03 TRU TeamWorks will resume printing on January 8, 2004 | Shipments expected this we December 18, 2003 The Big Story: It's a wrap - 2003 Topics Characterization News Transportation News Disposal News Safety News Working Smart Announcements Our Team Tools Acronym List Archives Back to Main Page WIPP Home Page Links Feedback Contact us with feedback or submit your e-mail address for updates. Click here to e- mail. WIPP Shipments (as of 12/18/03 at 8:14 a.m.) Shipments scheduled to arrive at WIPP this week 23 Total shipments received at WIPP 2,226 In 2003, the WIPP team delivered in every mission-essential area. TRU TeamWorks wraps up the calendar year with 2003's performance highlights. Steve Warren, Washington TRU Solutions (WTS) general manager, says, "I view

462

http://bellview/TeamWorks/TRUTeamWorks.htm  

NLE Websites -- All DOE Office Websites (Extended Search)

stemmed from a commitment made by WTS management to CBFO in May to "promote safety consciousness while we perform our work" and "improve our ability to manage people in a...

463

THE CHANGING CONTOURS OF ORGANISED VIOLENCE IN POST NEW ORDER INDONESIA  

E-Print Network (OSTI)

Ian Wilson THE CHANGING CONTOURS OF ORGANISED VIOLENCE IN POST NEW ORDER INDONESIA Working Paper No, vigilante and militia groups have a long and colourful history in Indonesia. Prevalent throughout in post New Order Indonesia, namely the impact of the state sponsored Pamswakarsa vigilante force

464

Leading order QCD shear viscosity from the three-particle irreducible effective action  

SciTech Connect

In this article we calculate the leading order shear viscosity in QCD using the resummed three-particle irreducible effective action. We work to 3-loop order in the effective action. We show that the integral equations that resum the pinch and collinear contributions are produced naturally by the formalism. All leading order terms are included, without the need for any kind of power counting arguments.

Carrington, M. E.; Kovalchuk, E. [Department of Physics, Brandon University, Brandon, Manitoba, R7A 6A9 (Canada) and Winnipeg Institute for Theoretical Physics, Winnipeg, Manitoba (Canada)

2009-10-15T23:59:59.000Z

465

Consent Order, Lawrence Livermore National National Security, LLC -  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lawrence Livermore National National Security, LLC - Lawrence Livermore National National Security, LLC - WCO-2010-01 Consent Order, Lawrence Livermore National National Security, LLC - WCO-2010-01 October 29, 2010 Consent Order issued to Lawrence Livermore National Security, LLC for deficiencies associated with the Lawrence Livermore National Laboratory Chronic Beryllium Disease Prevention Program This letter refers to the Office of Health, Safety and Security, Office of Enforcement investigation into deficiencies associated with the Lawrence Livermore National Laboratory (LLNL) Chronic Beryllium Disease Prevention Program (CBDPP) and related work planning and control processes. The results of the investigation were provided to Lawrence Livermore National Security, LLC (LLNS) in an Investigation Report dated July 7, 2009. An

466

Executive Order 13007 Indian Sacred Sites (1996) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

07 Indian Sacred Sites (1996) 07 Indian Sacred Sites (1996) Executive Order 13007 Indian Sacred Sites (1996) Executive Order 13007 Indian Sacred Sites (1996). Designed to protect and preserve Indian religious practices, this EO directs each federal agency that manages federal lands to "(1) accommodate access to and ceremonial use of Indian sacred sites by Indian religious practitioners and (2) avoid adversely affecting the physical integrity of such sacred sites." This EO also directs each federal agency to report to the President on "procedures implemented or proposed to facilitate with appropriate Indian tribes and religious leaders." Several EM sites and facilities are located on Tribal aboriginal and treaty lands. Staff at these facilities work with the Tribes to allow Tribal members safe access to DOE sites for

467

RHIC II Science Working Groups  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshops Workshops The series of RHIC II Science Workshops began in November 2004, at which time seven Working Groups were initiated. These groups met in workshops through 2005, with the purpose of providing an organized forum for the community to address and describe quantitatively the most important science issues for the proposed RHIC II luminosity upgrade, and corresponding detector upgrades. Each Working Group was led by three convenors representing theory and experiment, and each has produced a detailed report (except for the "New Directions" group, which provided a sounding board and input to the other groups). The Working Group reports are linked below. The summary "white paper" document, "Future Science at the Relativistic Heavy Ion Collider" (PDF), is based on these reports, and was prepared by a Writing Committee that included at least one convenor from each of the Working Groups.

468

Working with Modules within Python  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Modules within Perl and Python Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python scripts. You can do this! Using Modules within Python The EnvironmentModules python package gives access to the module system from within python. The EnvironmentModules python package has a single function: module. Using this function you can provide the same arguments you would to "module" on the command line. The module() function accepts a list of arguments, like ['load','']; or ['unload','']. >>> import EnvironmentModules as EnvMod >>> EnvMod.module(['load','blast+']) It is important to understand that this is most effective for scripts

469

DOE Work Breakdown Structure Handbook  

Energy.gov (U.S. Department of Energy (DOE))

This handbook provides suggested guidance and best practices on the development of product-oriented Work Breakdown Structures (WBS) that should be used by all projects within DOE to organize and...

470

Clean Energy Works Oregon (Oregon)  

Energy.gov (U.S. Department of Energy (DOE))

Clean Energy Works began in 2009 as a pilot program run by the City of Portland. In 2010, the US department of Energy awarded $20 million to create a statewide nonprofit to expand the program...

471

FY 1994 Annual Work Plan  

SciTech Connect

In accordance with the Inspector General`s Strategic Planning Policy directive, the Office of Inspector General (OIG) annually updates its Strategic Plan with budgetary and program guidance for the next fiscal year. The program guidance identifies and establishes priorities for OIG coverage of important DOE issues and operations, provides the basis for assigning OIG resources, and is the source for issues covered in Assistant Inspectors General annual work plans. The Office of the Assistant Inspector General for Audits (AIGA) publishes an Annual Work Plan in September of each year. The plan includes the OIG program guidance and shows the commitment of resources necessary to accomplish the assigned work and meet our goals. The program guidance provides the framework within which the AIGA work will be planned and accomplished. Audits included in this plan are designed to help insure that the requirements of our stakeholders have been considered and blended into a well balanced audit program.

1993-09-30T23:59:59.000Z

472

First Aid at Work Introduction  

E-Print Network (OSTI)

provided. 2. People, wherever they work in our industry, can suffer injury or be taken ill. It is essential such equipment and facilities as are adequate and appropriate in the circumstances for enabling first

473

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

474

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Nanoscale Chemical Imaging of a Working Catalyst Nanoscale Chemical Imaging of a Working Catalyst Print Wednesday, 28 January 2009 00:00 The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

475

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

476

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

477

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

478

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

479

Nanoscale Chemical Imaging of a Working Catalyst  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Chemical Imaging of a Working Catalyst Print Nanoscale Chemical Imaging of a Working Catalyst Print The heterogeneous catalysts used in most chemical processes typically consist of nanoscale metal or metal oxide particles dispersed on high-surface-area supports. While these particles are the active elements of the catalyst, the overall performance depends not only on their size and composition but also on their multiple interactions with the support, reactants, and products. Probing this chemical soup in real time under realistic reaction conditions is such a tall order that in some cases even the catalytically active chemical species is not known. A Dutch team working at the ALS has combined scanning transmission x-ray microscopy with a reaction chamber adapted from electron microscopy to identify the chemical species present for an iron-based Fischer-Tropsch synthesis catalyst and to image their distribution on the nanoscale. When developed further, this new tool may give chemists the ability to design and tailor catalysts for maximum selectivity and efficiency in a wide range of chemical processes.

480

Implementing for Implementing Executive Order 13423  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPLEMENTING EXECUTIVE IMPLEMENTING EXECUTIVE ORDER 13423 "Strengthening Federal Environmental, Energy, and Transportation Management" March 29, 2007 0 Contents I. Introduction ......................................................................................................................1 A. Purpose..................................................................................................................1 B. Authority ...............................................................................................................1 C. Organization and Oversight ..................................................................................1 D. Overarching Policy and Directives .......................................................................4

Note: This page contains sample records for the topic "work order attachment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

HSI Tape Ordering Script at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Tape Ordering Script Tape Ordering Script HSI Tape Ordering Script Below is an example of a perl script that shows how one might create a list of hsi retrievals from HPSS that are ordered by tape and tape position for the most efficient way to get the files. Note that the source directory in HPSS and the destination directory on disk are hardwired along with a selection on what files to list. The script is based on using "hsi ls" with the "-P" option. Also shown is what the script prints out as it is run and a snippet of the output file it produces containing the transfer commands. #! /usr/bin/perl use strict; ### This script lists an hpss directory, sorts the files according to ### tape and position on the tape and creates a file containing ### the transfer commands. Written by ELH, 10/29/10.

482

Administrative Order, June 13, 2000 Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Administrative Order No. 00NWPKW-1251 Administrative Order No. 00NWPKW-1251 State Washington Agreement Type Administrative Order Legal Driver(s) RCRA Scope Summary Resolve Ecology's October 12, 1999 finding that DOE failed to complete Major TPA Milestone M-32 with respect to Double-Shell Tank (DST) integrity assessments Parties DOE; CH2M Hill Hanford Group; State of Washington Department of Ecology Date 6/13/2000 SCOPE * Require DOE and CH2M Hill Hanford Group to comply with the Revised Code of Washington, HWMA, Washington Administrative Code, the Dangerous Waste Regulations, and by reference, the CFR by taking actions which are described in this Order. * Resolve Ecology's October 12, 1999 finding that DOE failed to complete Major TPA Milestone M-32 with respect to Double-Shell Tank (DST) integrity assessments.

483

International Refrigeration: Order (2012-CE-1510)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered International Refrigeration Products to pay an $8,000 civil penalty after finding International Refrigeration had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

484

Cospolich Refrigerator: Order (2013-CE-5314)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Cospolich Refrigerator Co, Inc. to pay a $8,000 civil penalty after finding Cospolich Refrigerator had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

485

Fagor America: Order (2013-CEW-19001)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Fagor America, Inc. to pay a $13,000 civil penalty after finding Fagor America had failed to certify that certain models of residential refrigerator-freezers and dishwashers comply with the applicable energy and water conservation standards.

486

Custom Coolers: Order (2013-CE-5315)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Custom Coolers, LLC to pay a $8,000 civil penalty after finding Custom Coolers had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

487

Midea Washing Appliance: Order (2011-CE-1903)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Midea Washing Appliance Mfg. Co., Ltd. to pay a $6,000 civil penalty after finding Midea Washing Appliance had failed to certify that certain models of dishwashers comply with the applicable energy conservation standards.

488

Imperial Manufacturing: Order (2013-CE-5322)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Imperial Manufacturing, Inc. to pay a $8,000 civil penalty after finding Imperial Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

489

Kold Pack: Order (2013-CE-5323)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Kold Pack, Inc. to pay a $8,000 civil penalty after finding Kold Pack had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

490

ET Industries: Order (2012-SE-2902)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered ET Industries, Inc. to pay a $39,000 civil penalty after finding ET Industries had manufactured and distributed in commerce in the U.S. 974 units of basic model TH-1, a noncompliant showerhead.

491

Barclay Products: Order (2013-CW-3005)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Barclay Products, Ltd. to pay a $8,000 civil penalty after finding Barclay Products had failed to certify that certain models of water closets comply with the applicable water conservation standards.

492

Limit order markets, liquidity, and price impact  

E-Print Network (OSTI)

In this thesis, I explore various aspects of market liquidity and analyze its effect on asset prices. First, in a model of a limit order market I explain how to define liquidity and derive a price impact function. Second, ...

Rosu, Ioanid, 1970-

2004-01-01T23:59:59.000Z

493

Act One: Order (2013-CE-49001)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Act One Communications, Inc. to pay a $8,000 civil penalty after finding Act One had failed to certify that certain basic models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

494

Modelling higher-order dual nondeterminacy  

Science Conference Proceedings (OSTI)

We investigate models for programming and specifying in which higher-order functions and nondeterminacy (both demonic and angelic) coexist. The models are built using predicate transformers, binary multirelations, state transformers, and free lattices ...

Joseph M. Morris; Malcolm Tyrrell

2008-07-01T23:59:59.000Z

495

Refinement of higher-order logic programs  

Science Conference Proceedings (OSTI)

A refinement calculus provides a method for transforming specifications to executable code, maintaining the correctness of the code with respect to its specification. In this paper we extend the refinement calculus for logic programs to include higher-order ...

Robert Colvin; Ian Hayes; David Hemer; Paul Strooper

2002-09-01T23:59:59.000Z

496

Hisense USA: Order (2010-CE-1211)  

Energy.gov (U.S. Department of Energy (DOE))

DOE issued an Order after entering into a Compromise Agreement with Hisense USA Corp. after finding Hisense USA had failed to certify that certain models of residential refrigerators, refrigerator-freezers, and freezers comply with the applicable energy conservation standards.

497

Acme Kitchenettes: Order (2011-CE-1406)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Acme Kitchenettes Corp. to pay a $6,000 civil penalty after finding Acme Kitchenettes had failed to certify that certain models of refrigerators comply with the applicable energy conservation standards.

498

Polar King: Order (2013-CE-5328)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Polar King International Inc. to pay a $8,000 civil penalty after finding Polar King had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

499

Office of Security Policy - Regulations and Orders  

NLE Websites -- All DOE Office Websites (Extended Search)

Part 970--DOE Management and Operating Contracts, 970.5204-2 Laws, Regulations, and DOE Directives DOE DIRECTIVES: DOE Order 142.3, Chg.1, Unclassified Foreign Visits and...

500

Living Direct: Order (2011-CE-1904)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Living Direct, Inc. to pay a $6,000 civil penalty after finding Living Direct had failed to certify that certain models of dishwashers, refrigerator-freezers and freezers comply with the applicable energy conservation standards.