Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

LIQUID NATURAL GAS (LNG): AN ALTERNATIVE FUEL FROM LANDFILL GAS (LFG) AND WASTEWATER DIGESTER GAS  

SciTech Connect (OSTI)

This Research and Development Subcontract sought to find economic, technical and policy links between methane recovery at landfill and wastewater treatment sites in New York and Maryland, and ways to use that methane as an alternative fuel--compressed natural gas (CNG) or liquid natural gas (LNG) -- in centrally fueled Alternative Fueled Vehicles (AFVs).

VANDOR,D.

1999-03-01T23:59:59.000Z

2

TEMPORAL VARIATION OF LFG EMISSION FROM DIFFERENT TYPES OF  

E-Print Network [OSTI]

). This reduction of the landfill gas (LFG) emissions requires the ability to measure low methane emissions methane emissions were observed only near the landfill gas

Paris-Sud XI, Université de

3

LFG recovery from a surface collection system  

SciTech Connect (OSTI)

As part of a settlement agreement with the Michigan Department of Natural Resources to remediate the overfilling of their Phase II Landfill, the City of Ann Arbor (City), Michigan, was required to construct a cap which included a surface gas collection system. In 1992, the City became interested in exploring how effectively this system could collect LFG for use with electrical generators. The City of Ann Arbor began to research options for utilizing landfill gas generated at their municipal landfill as an energy resource in 1985. After the passage of Michigan Public Act 2 in 1989 which allowed Michigan`s two largest electric utilities to purchase at least 120 megawatts (MW) of electricity form waste-to-energy facilities at a higher price than from conventional sources, such a project became more feasible. In July 1992, the City entered into an {open_quotes}Agreement of Understanding{close_quotes} with Detroit Edison, the City`s electric supplier, and Landfill Energy Systems (LES), a company experienced in landfill gas to energy projects, to assist in analyzing the feasibility of a project for Ann Arbor. SCS Engineers (SCS) was retained by the City to perform a desktop study of the Landfill`s potential LFG production. The results of the study indicated that there may be enough gas to yield 1600 kilowatts (kW) of generation capacity through the year 2000.

Konkle, D.L. [Municipal Energy Coordinator, Ann Arbor, MI (United States); Gaunthier, S.P.; Seager, C.M. [and others

1995-08-01T23:59:59.000Z

4

Towards data-intensive testing of a broad-coverage LFG grammar  

E-Print Network [OSTI]

, broad-coverage LFG grammars for English, French and German have been developed with this platform (ButtTowards data-intensive testing of a broad-coverage LFG grammar Jonas Kuhn This paper addresses and optimizing a broad-coverage grammar of German). 1 A method of TArget Speci cation and regression TEsting

Reyle, Uwe

5

International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007  

E-Print Network [OSTI]

International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007 Photo: NTC Marketing Specialist and Sebastian Hetsch, Consultant Food and Agricultural Organization & UN Economic Commission for Europe Geneva, Switzerland #12;International Conference on Wood-based Bioenergy LIGNA

6

Stress-wave velocity of wood-based panels: Effect of moisture,  

E-Print Network [OSTI]

for wood-based panel products. In the forest products industry, nondestructive evaluation (NDE) technology, Ross and Pellerin 1994). One NDE technique, which uses stress-wave propagation characteristics, has received considerable atten- tion. Stress-wave-based NDE techniques have been investi- gated extensively

7

LFG Technologies | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 ThrottledInformationparticipants < LEDSGP‎ |featuresLEEDLFG

8

Liquid-Liquid Extraction Processes  

E-Print Network [OSTI]

Liquid-liquid extraction is the separation of one or more components of a liquid solution by contact with a second immiscible liquid called the solvent. If the components in the original liquid solution distribute themselves differently between...

Fair, J. R.; Humphrey, J. L.

1983-01-01T23:59:59.000Z

9

Hutchins LFG Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation,Ohio:GreerHiCalifornia: Energy ResourcesPark,is a townHurley is

10

Johnston LFG (MA RPS Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place: EdenOverview JumpJessi3bl's blog HomeJohn Deere Jump91.

11

Liquid electrode  

DOE Patents [OSTI]

A dropping electrolyte electrode is described for use in electrochemical analysis of non-polar sample solutions, such as benzene or cyclohexane. The liquid electrode, preferably an aqueous salt solution immiscible in the sample solution, is introduced into the solution in dropwise fashion from a capillary. The electrolyte is introduced at a known rate, thus, the droplets each have the same volume and surface area. The electrode is used in making standard electrochemical measurements in order to determine properties of non-polar sample solutions. 2 figures.

Ekechukwu, A.A.

1994-07-05T23:59:59.000Z

12

Liquid foams of graphene  

E-Print Network [OSTI]

Liquid foams are dispersions of bubbles in a liquid. Bubbles are stabilized by foaming agents that position at the interface between the gas and the liquid. Most foaming agents, such as the commonly used sodium dodecylsulfate, ...

Alcazar Jorba, Daniel

2012-01-01T23:59:59.000Z

13

Safetygram #9- Liquid Hydrogen  

Broader source: Energy.gov [DOE]

Hydrogen is colorless as a liquid. Its vapors are colorless, odorless, tasteless, and highly flammable.

14

Liquid level detector  

DOE Patents [OSTI]

A liquid level detector for low pressure boilers. A boiler tank, from which apor, such as steam, normally exits via a main vent, is provided with a vertical side tube connected to the tank at the desired low liquid level. When the liquid level falls to the level of the side tube vapor escapes therethrough causing heating of a temperature sensitive device located in the side tube, which, for example, may activate a liquid supply means for adding liquid to the boiler tank. High liquid level in the boiler tank blocks entry of vapor into the side tube, allowing the temperature sensitive device to cool, for example, to ambient temperature.

Grasso, Albert P. (Vernon, CT)

1986-01-01T23:59:59.000Z

15

Liquid level detector  

DOE Patents [OSTI]

A liquid level detector for low pressure boilers. A boiler tank, from which vapor, such as steam, normally exits via a main vent, is provided with a vertical side tube connected to the tank at the desired low liquid level. When the liquid level falls to the level of the side tube vapor escapes therethrough causing heating of a temperature sensitive device located in the side tube, which, for example, may activate a liquid supply means for adding liquid to the boiler tank. High liquid level in the boiler tank blocks entry of vapor into the side tube, allowing the temperature sensitive device to cool, for example, to ambient temperature.

Grasso, A.P.

1984-02-21T23:59:59.000Z

16

Liquid Hydrogen Absorber for MICE  

E-Print Network [OSTI]

REFERENCES Figure 5: Liquid hydrogen absorber and test6: Cooling time of liquid hydrogen absorber. Eight CernoxLIQUID HYDROGEN ABSORBER FOR MICE S. Ishimoto, S. Suzuki, M.

Ishimoto, S.

2010-01-01T23:59:59.000Z

17

Guidance Document Cryogenic Liquids  

E-Print Network [OSTI]

with air. Liquid carbon monoxide is extremely toxic and extremely flammable. #12;Cryogenic liquids connecting cylinder to lower pressure piping or systems. 6. Use a check valve or trap in the discharge line

18

Equation for liquid density  

SciTech Connect (OSTI)

Saturated liquid densities for organic chemicals are given as functions of temperature using a modified Rackett equation.

Yaws, C.L.; Yang, H.C.; Hopper, J.R.; Cawley, W.A. (Lamar Univ., Beaumont, TX (US))

1991-01-01T23:59:59.000Z

19

Liquid detection circuit  

DOE Patents [OSTI]

Herein is a circuit which is capable of detecting the presence of liquids, especially cryogenic liquids, and whose sensor will not overheat in a vacuum. The circuit parameters, however, can be adjusted to work with any liquid over a wide range of temperatures.

Regan, Thomas O. (North Aurora, IL)

1987-01-01T23:59:59.000Z

20

Urban Wood-Based Bio-Energy Systems in Seattle  

SciTech Connect (OSTI)

Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Stan Gent, Seattle Steam Company

2010-10-25T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Wood-based Energy Technologies Michigan offers some significant advantages  

E-Print Network [OSTI]

-based bioenergy facilities: a large forest resource, good trans- portation systems, and access to the Great Lakes has grown rapidly around the world, with the largest markets in Europe. Pellets can be pressed using that is outside of the hot water grid or for sale to larger markets. Thermochemical and biochemical refining

22

The Wood-Based Biorefinery in a Petroleum Depleted World  

E-Print Network [OSTI]

3 Year Old Willow #12;14 14 Woody Biomass Feedstocks Sustainably harvested low value wood from, Sustainable Bioproducts: Fuels, Chemicals, Materials Renewable Resources to "Green" Bio-Products Woody Biomass Feedstock #12;5 5 Spindletop at Beaumont, TX Circa late 1890's Birth of the Petroleum Industry in Texas

Chatterjee, Avik P.

23

Liquid Wall Chambers  

SciTech Connect (OSTI)

The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

Meier, W R

2011-02-24T23:59:59.000Z

24

Liquid Metal Transformers  

E-Print Network [OSTI]

The room temperature liquid metal is quickly emerging as an important functional material in a variety of areas like chip cooling, 3D printing or printed electronics etc. With diverse capabilities in electrical, thermal and flowing behaviors, such fluid owns many intriguing properties that had never been anticipated before. Here, we show a group of unconventional phenomena occurring on the liquid metal objects. Through applying electrical field on the liquid metals immersed in water, a series of complex transformation behaviors such as self-assembling of a sheet of liquid metal film into a single sphere, quick mergences of separate metal droplets, controlled self-rotation and planar locomotion of liquid metal objects can be realized. Meanwhile, it was also found that two accompanying water vortexes were induced and reliably swirled near the rotating liquid metal sphere. Further, effects of the shape, size, voltage, orientation and geometries of the electrodes to control the liquid metal transformers were clar...

Sheng, Lei; Liu, Jing

2014-01-01T23:59:59.000Z

25

Ultrasonic liquid level detector  

DOE Patents [OSTI]

An ultrasonic liquid level detector for use within a shielded container, the detector being tubular in shape with a chamber at its lower end into which liquid from in the container may enter and exit, the chamber having an ultrasonic transmitter and receiver in its top wall and a reflector plate or target as its bottom wall whereby when liquid fills the chamber a complete medium is then present through which an ultrasonic wave may be transmitted and reflected from the target thus signaling that the liquid is at chamber level.

Kotz, Dennis M. (North Augusta, SC); Hinz, William R. (Augusta, GA)

2010-09-28T23:59:59.000Z

26

Liquid Metal Transformers  

E-Print Network [OSTI]

The room temperature liquid metal is quickly emerging as an important functional material in a variety of areas like chip cooling, 3D printing or printed electronics etc. With diverse capabilities in electrical, thermal and flowing behaviors, such fluid owns many intriguing properties that had never been anticipated before. Here, we show a group of unconventional phenomena occurring on the liquid metal objects. Through applying electrical field on the liquid metals immersed in water, a series of complex transformation behaviors such as self-assembling of a sheet of liquid metal film into a single sphere, quick mergences of separate metal droplets, controlled self-rotation and planar locomotion of liquid metal objects can be realized. Meanwhile, it was also found that two accompanying water vortexes were induced and reliably swirled near the rotating liquid metal sphere. Further, effects of the shape, size, voltage, orientation and geometries of the electrodes to control the liquid metal transformers were clarified. Such events are hard to achieve otherwise on rigid metal or conventional liquid spheres. This finding has both fundamental and practical significances which suggest a generalized way of making smart soft machine, collecting discrete metal fluids, as well as flexibly manipulating liquid metal objects including accompanying devices.

Lei Sheng; Jie Zhang; Jing Liu

2014-01-30T23:59:59.000Z

27

Liquid Crystal Optofluidics  

SciTech Connect (OSTI)

By employing anisotropic fluids and namely liquid crystals, fluid flow becomes an additional degree of freedom in designing optofluidic devices. In this paper, we demonstrate optofluidic liquid crystal devices based on the direct flow of nematic liquid crystals in microfluidic channels. Contrary to previous reports, in the present embodiment we employ the effective phase delay acquired by light travelling through flowing liquid crystal, without analysing the polarisation state of the transmitted light. With this method, we demonstrate the variation in the diffraction pattern of an array of microfluidic channels acting as a grating. We also discuss our recent activities in integrating mechanical oscillators for on-chip peristaltic pumping.

Vasdekis, Andreas E.; Cuennet, J. G.; Psaltis, D.

2012-10-11T23:59:59.000Z

28

(Ionization in liquids)  

SciTech Connect (OSTI)

This document describes charge transport following ionization of model liquids and how this process may be important in carcinogenesis. 15 refs., 2 figs., 4 tabs. (MHB)

Not Available

1991-01-01T23:59:59.000Z

29

Absorption of sound in liquids and liquid mixtures  

E-Print Network [OSTI]

ABSORPTION OF SOUND IN LIQUIDS AND LIQUID MIXTURES A Thesis Raiq S. causa Approved as to style and content by: (Chairman of Committee) January 1955 L1BRARY A 4 M COLLEOE OF IEXAS ADSORPTION OF SOfP@ LIQUIDS AND LIQUID NIXTURES A Thesis... Introduction to the Problem Experimental Methods and Procedures Results Discussion of Results Acknowledgements Bib 1 io graphy 22 4I 42 Introduction to the Problem The study of sound absorption in liquids and liquid mixtures is of considerable...

Musa, Raiq S

2012-06-07T23:59:59.000Z

30

Carbon monoxide absorbing liquid  

SciTech Connect (OSTI)

The present disclosure is directed to a carbon monoxide absorbing liquid containing a cuprous ion, hydrochloric acid and titanum trichloride. Titanium trichloride is effective in increasing the carbon monoxide absorption quantity. Furthermore, titanium trichloride remarkably increases the oxygen resistance. Therefore, this absorbing liquid can be used continuously and for a long time.

Arikawa, Y.; Horigome, S.; Kanehori, K.; Katsumoto, M.

1981-07-07T23:59:59.000Z

31

INEEL Liquid Effluent Inventory  

SciTech Connect (OSTI)

The INEEL contractors and their associated facilities are required to identify all liquid effluent discharges that may impact the environment at the INEEL. This liquid effluent information is then placed in the Liquid Effluent Inventory (LEI) database, which is maintained by the INEEL prime contractor. The purpose of the LEI is to identify and maintain a current listing of all liquid effluent discharge points and to identify which discharges are subject to federal, state, or local permitting or reporting requirements and DOE order requirements. Initial characterization, which represents most of the INEEL liquid effluents, has been performed, and additional characterization may be required in the future to meet regulations. LEI information is made available to persons responsible for or concerned with INEEL compliance with liquid effluent permitting or reporting requirements, such as the National Pollutant Discharge Elimination System, Wastewater Land Application, Storm Water Pollution Prevention, Spill Prevention Control and Countermeasures, and Industrial Wastewater Pretreatment. The State of Idaho Environmental Oversight and Monitoring Program also needs the information for tracking liquid effluent discharges at the INEEL. The information provides a baseline from which future liquid discharges can be identified, characterized, and regulated, if appropriate. The review covered new and removed buildings/structures, buildings/structures which most likely had new, relocated, or removed LEI discharge points, and at least 10% of the remaining discharge points.

Major, C.A.

1997-06-01T23:59:59.000Z

32

Synthesis of ionic liquids  

DOE Patents [OSTI]

Ionic compounds which are liquids at room temperature are formed by the method of mixing a neutral organic liqand with the salt of a metal cation and its conjugate anion. The liquids are hydrophobic, conductive and stable and have uses as solvents and in electrochemical devices.

Dai, Sheng [Knoxville, TN; Luo, Huimin [Knoxville, TN

2008-09-09T23:59:59.000Z

33

Liquid heat capacity lasers  

DOE Patents [OSTI]

The heat capacity laser concept is extended to systems in which the heat capacity lasing media is a liquid. The laser active liquid is circulated from a reservoir (where the bulk of the media and hence waste heat resides) through a channel so configured for both optical pumping of the media for gain and for light amplification from the resulting gain.

Comaskey, Brian J. (Walnut Creek, CA); Scheibner, Karl F. (Tracy, CA); Ault, Earl R. (Livermore, CA)

2007-05-01T23:59:59.000Z

34

Air Liquide - Biogas & Fuel Cells  

Broader source: Energy.gov (indexed) [DOE]

Liquide - Biogas & Fuel Cells Hydrogen Energy Biogas Upgrading Technology 12 June 2012 Charlie.Anderson@airliquide.com 2 Air Liquide, world leader in gases for industry,...

35

Liquid sampling system  

DOE Patents [OSTI]

A conduit extends from a reservoir through a sampling station and back to the reservoir in a closed loop. A jet ejector in the conduit establishes suction for withdrawing liquid from the reservoir. The conduit has a self-healing septum therein upstream of the jet ejector for receiving one end of a double-ended cannula, the other end of which is received in a serum bottle for sample collection. Gas is introduced into the conduit at a gas bleed between the sample collection bottle and the reservoir. The jet ejector evacuates gas from the conduit and the bottle and aspirates a column of liquid from the reservoir at a high rate. When the withdrawn liquid reaches the jet ejector the rate of flow therethrough reduces substantially and the gas bleed increases the pressure in the conduit for driving liquid into the sample bottle, the gas bleed forming a column of gas behind the withdrawn liquid column and interrupting the withdrawal of liquid from the reservoir. In the case of hazardous and toxic liquids, the sample bottle and the jet ejector may be isolated from the reservoir and may be further isolated from a control station containing remote manipulation means for the sample bottle and control valves for the jet ejector and gas bleed. 5 figs.

Larson, L.L.

1984-09-17T23:59:59.000Z

36

Liquid metal electric pump  

DOE Patents [OSTI]

An electrical pump for pumping liquid metals to high pressures in high temperature environments without the use of magnets or moving mechanical parts. The pump employs a non-porous solid electrolyte membrane, typically ceramic, specific to the liquid metal to be pumped. A DC voltage is applied across the thickness of the membrane causing ions to form and enter the membrane on the electrically positive surface, with the ions being neutralized on the opposite surface. This action provides pumping of the liquid metal from one side of the non-porous solid electrolyte membrane to the other.

Abbin, Joseph P. (Albuquerque, NM); Andraka, Charles E. (Albuquerque, NM); Lukens, Laurance L. (Albuquerque, NM); Moreno, James B. (Albuquerque, NM)

1992-01-01T23:59:59.000Z

37

Liquid metal electric pump  

DOE Patents [OSTI]

An electrical pump for pumping liquid metals to high pressures in high temperature environments without the use of magnets or moving mechanical parts. The pump employs a non-porous solid electrolyte membrane, typically ceramic, specific to the liquid metal to be pumped. A DC voltage is applied across the thickness of the membrane causing ions to form and enter the membrane on the electrically positive surface, with the ions being neutralized on the opposite surface. This action provides pumping of the liquid metal from one side of the non-porous solid electrolyte membrane to the other. 3 figs.

Abbin, J.P.; Andraka, C.E.; Lukens, L.L.; Moreno, J.B.

1992-01-14T23:59:59.000Z

38

Liquidity facilities and signaling  

E-Print Network [OSTI]

This dissertation studies the role of signaling concerns in discouraging access to liquidity facilities like the IMF contingent credit lines (CCL) and the Discount Window (DW). In Chapter 1, I analyze the introduction of ...

Arregui, Nicols

2010-01-01T23:59:59.000Z

39

Liquid crystalline composites containing phyllosilicates  

DOE Patents [OSTI]

The present invention provides phyllosilicate-polymer compositions which are useful as liquid crystalline composites. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while at the same time be transparent. Because of the ordering of the particles liquid crystalline composite, liquid crystalline composites are particularly useful as barriers to gas transport.

Chaiko, David J.

2004-07-13T23:59:59.000Z

40

Properties of Liquid Plutonium  

SciTech Connect (OSTI)

Unalloyed polycrystalline Pu displays extreme thermal expansion behavior, i.e., {alpha} {yields} {beta} {yields} {gamma} {yields} {delta} increases by 25% in volume and {delta} {yields} {var_epsilon} {yields} liquid decreases by 4.5% in volume. Thus, making it difficult to measure density into the liquid state. Dilatometer outfitted with CaF molten metal cell offers a proven capability to measure thermal expansion in molten metals, but has yet to be proven for Pu. Historic data from the liquid nuclear fuels program will prove extremely useful as a guide to future measurements. 3.3at% Ga changes Pu molten metal properties: 50% increase in viscosity and {approx}3% decrease in density. Fe may decrease the density by a small amount assuming an averaging of densities for Pu-Ga and Pu-Fe liquids. More recent Boivineau (2009) work needs some interpretation, but technique is being employed in (U,Pu)O{sub 2} nuclear fuels program (Pu Futures, 2012).

Freibert, Franz J. [Los Alamos National Laboratory; Mitchell, Jeremy N. [Los Alamos National Laboratory; Schwartz, Daniel S. [Los Alamos National Laboratory; Saleh, Tarik A. [Los Alamos National Laboratory; Migliori, Albert [Los Alamos National Laboratory

2012-08-02T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Imaging Liquids Using Microfluidic Cells  

SciTech Connect (OSTI)

Chemistry occurring in the liquid and liquid surface is important in many applications. Chemical imaging of liquids using vacuum based analytical techniques is challenging due to the difficulty in working with liquids with high volatility. Recent development in microfluidics enabled and increased our capabilities to study liquid in situ using surface sensitive techniques such as electron microscopy and spectroscopy. Due to its small size, low cost, and flexibility in design, liquid cells based on microfluidics have been increasingly used in studying and imaging complex phenomena involving liquids. This paper presents a review of microfluidic cells that were developed to adapt to electron microscopes and various spectrometers for in situ chemical analysis and imaging of liquids. The following topics will be covered including cell designs, fabrication techniques, unique technical features for vacuum compatible cells, and imaging with electron microscopy and spectroscopy. Challenges are summarized and recommendations for future development priority are proposed.

Yu, Xiao-Ying; Liu, Bingwen; Yang, Li

2013-05-10T23:59:59.000Z

42

Liquid metal thermal electric converter  

DOE Patents [OSTI]

A liquid metal thermal electric converter which converts heat energy to electrical energy. The design of the liquid metal thermal electric converter incorporates a unique configuration which directs the metal fluid pressure to the outside of the tube which results in the structural loads in the tube to be compressive. A liquid metal thermal electric converter refluxing boiler with series connection of tubes and a multiple cell liquid metal thermal electric converter are also provided.

Abbin, Joseph P. (Albuquerque, NM); Andraka, Charles E. (Albuquerque, NM); Lukens, Laurance L. (Albuquerque, NM); Moreno, James B. (Albuquerque, NM)

1989-01-01T23:59:59.000Z

43

Liquid crystalline composites containing phyllosilicates  

DOE Patents [OSTI]

The present invention provides barrier films having reduced gas permeability for use in packaging and coating applications. The barrier films comprise an anisotropic liquid crystalline composite layer formed from phyllosilicate-polymer compositions. Phyllosilicate-polymer liquid crystalline compositions of the present invention can contain a high percentage of phyllosilicate while remaining transparent. Because of the ordering of the particles in the liquid crystalline composite, barrier films comprising liquid crystalline composites are particularly useful as barriers to gas transport.

Chaiko; David J. (Naperville, IL)

2007-05-08T23:59:59.000Z

44

High temperature liquid level sensor  

DOE Patents [OSTI]

A length of metal sheathed metal oxide cable is perforated to permit liquid access to the insulation about a pair of conductors spaced close to one another. Changes in resistance across the conductors will be a function of liquid level, since the wetted insulation will have greater electrical conductivity than that of the dry insulation above the liquid elevation.

Tokarz, Richard D. (West Richland, WA)

1983-01-01T23:59:59.000Z

45

Analysis & Simulation of Dynamics in Supercooled Liquids  

E-Print Network [OSTI]

Moreover, the heat capacity of that liquid is also higherthe intensive heat capacities of the liquid and the crystal,

Elmatad, Yael Sarah

2011-01-01T23:59:59.000Z

46

Modeling Liquid-Liquid Equilibrium of Ionic Liquid Systems with NRTL, Electrolyte-NRTL, and UNIQUAC  

E-Print Network [OSTI]

Modeling Liquid-Liquid Equilibrium of Ionic Liquid Systems with NRTL, Electrolyte-NRTL, and UNIQUAC different excess Gibbs free energy models are evaluated: the NRTL, UNIQUAC and electrolyte- NRTL (eNRTL) models. In the case of eNRTL, a new formulation of the model is used, based on a symmetric reference

Stadtherr, Mark A.

47

Liquid filtration simulation  

SciTech Connect (OSTI)

We have a developed a computer code that simulates 3-D filtration of suspended particles in fluids in realistic filter structures. This code, being the most advanced filtration simulation package developed to date, provides LLNL and DOE with new capabilities to address problems in cleaning liquid wastes, medical fluid cleaning, and recycling liquids. The code is an integrated system of commercially available and LLNL-developed software; the most critical are the computational fluid dynamics (CFD) solver and the particle transport program. For the CFD solver, we used a commercial package based on Navier-Stokes equations and a LLNL-developed package based on Boltzman-lattice gas equations. For the particle transport program, we developed a cod based on the 3-D Langevin equation of motion and the DLVO theory of electrical interactions. A number of additional supporting packages were purchased or developed to integrate the simulation tasks and to provide visualization output.

Corey, I.; Bergman, W.

1996-06-01T23:59:59.000Z

48

Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume 2: A Techno-economic Evaluation of the Production of Mixed Alcohols  

SciTech Connect (OSTI)

Biomass is a renewable energy resource that can be converted into liquid fuel suitable for transportation applications and thus help meet the Energy Independence and Security Act renewable energy goals (U.S. Congress 2007). However, biomass is not always available in sufficient quantity at a price compatible with fuels production. Municipal solid waste (MSW) on the other hand is readily available in large quantities in some communities and is considered a partially renewable feedstock. Furthermore, MSW may be available for little or no cost. This report provides a techno-economic analysis of the production of mixed alcohols from MSW and compares it to the costs for a wood based plant. In this analysis, MSW is processed into refuse derived fuel (RDF) and then gasified in a plant co-located with a landfill. The resulting syngas is then catalytically converted to mixed alcohols. At a scale of 2000 metric tons per day of RDF, and using current technology, the minimum ethanol selling price at a 10% rate of return is approximately $1.85/gallon ethanol (early 2008 $). However, favorable economics are dependent upon the toxicity characteristics of the waste streams and that a market exists for the by-product scrap metal recovered from the RDF process.

Jones, Susanne B.; Zhu, Yunhua; Valkenburt, Corinne

2009-05-01T23:59:59.000Z

49

Franklin County Sanitary Landfill - Landfill Gas (LFG) to Liquefied Natural Gas (LNG) - Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" GiveFuture ofFRANKLIN COUNTY SANITARY

50

Ionic Liquid Pretreatment Technologies  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIan KalinResearch,IntroducingIonic Liquid Pretreatment EERE

51

Supported liquid membrane electrochemical separators  

DOE Patents [OSTI]

Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

Pemsler, J. Paul (Lexington, MA); Dempsey, Michael D. (Revere, MA)

1986-01-01T23:59:59.000Z

52

Liquid monobenzoxazine based resin system  

DOE Patents [OSTI]

The present invention provides a liquid resin system including a liquid monobenzoxazine monomer and a non-glycidyl epoxy compound, wherein the weight ratio of the monobenzoxazine monomer to the non-glycidyl epoxy compound is in a range of about 25:75 to about 60:40. The liquid resin system exhibits a low viscosity and exceptional stability over an extended period of time making its use in a variety of composite manufacturing methods highly advantageous.

Tietze, Roger; Nguyen, Yen-Loan; Bryant, Mark

2014-10-07T23:59:59.000Z

53

Process for preparing liquid wastes  

DOE Patents [OSTI]

A process for preparing radioactive and other hazardous liquid wastes for treatment by the method of vitrification or melting is provided for.

Oden, Laurance L. (Albany, OR); Turner, Paul C. (Albany, OR); O'Connor, William K. (Lebanon, OR); Hansen, Jeffrey S. (Corvallis, OR)

1997-01-01T23:59:59.000Z

54

FLARE, Fermilab Liquid Argon Experiments  

E-Print Network [OSTI]

Mature technology of Liquid Argon Time Projection Chambers in conjunction with intense neutrino beams constructed at Fermilab offer a broad program of neutrino physics for the next decade.

L. Bartoszek

2004-08-24T23:59:59.000Z

55

Lithium-loaded liquid scintillators  

DOE Patents [OSTI]

The invention is directed to a liquid scintillating composition containing (i) one or more non-polar organic solvents; (ii) (lithium-6)-containing nanoparticles having a size of up to 10 nm and surface-capped by hydrophobic molecules; and (iii) one or more fluorophores. The invention is also directed to a liquid scintillator containing the above composition.

Dai, Sheng (Knoxville, TN); Kesanli, Banu (Mersin, TR); Neal, John S. (Knoxville, TN)

2012-05-15T23:59:59.000Z

56

Freezing of a Liquid Marble  

E-Print Network [OSTI]

In this study, we present for the first time the observations of a freezing liquid marble. In the experiment, liquid marbles are gently placed on the cold side of a Thermo-Electric Cooler (TEC) and the morphological changes are recorded and characterized thereafter. These liquid marbles are noticed to undergo a shape transition from a spherical to a flying-saucer shaped morphology. The freezing dynamics of liquid marbles is observed to be very different from that of a freezing water droplet on a superhydrophobic surface. For example, the pointy tip appearing on a frozen water drop could not be observed for a frozen liquid marble. In the end, we highlight a possible explanation for the observed morphology.

Ali Hashmi; Adam Strauss; Jie Xu

2012-07-03T23:59:59.000Z

57

Method for treating liquid wastes  

DOE Patents [OSTI]

The method of treating liquid waste in a media is accomplished by exposing the media to phosphinimines and sequestering {sup 99}Tc from the media by the phosphinimine (PN) functionalities. The system for treating the liquid waste in the media includes extraction of {sup 99}TcO{sub 4}{sup {minus}} from aqueous solutions into organic solvents or mixed organic/polar media, extraction of {sup 99}Tc from solutions on a solid matrix by using a container containing PN functionalities on solid matrices including an inlet and outlet for allowing flow of media through an immobilized phosphinimine ligand system contained within the container. Also, insoluble suspensions of phosphinimine functionalities on solid matrices in liquid solutions or present on supported liquid membranes (SLM) can be used to sequester {sup 99}Tc from those liquids. 6 figs.

Katti, K.V.; Volkert, W.A.; Singh, P.; Ketring, A.R.

1995-12-26T23:59:59.000Z

58

Method for treating liquid wastes  

DOE Patents [OSTI]

The method of treating liquid waste in a media is accomplished by exposing the media to phosphinimines and sequestering .sup.99 Tc from the media by the phosphinimine (PN) functionalities. The system for treating the liquid waste in the media includes extraction of .sup.99 TcO.sub.4.sup.- from aqueous solutions into organic solvents or mixed organic/polar media, extraction of .sup.99 Tc from solutions on a solid matrix by using a container containing PN functionalities on solid matrices including an inlet and outlet for allowing flow of media through an immobilized phosphinimine ligand system contained within the container. Also, insoluble suspensions of phosphinimine functionalities on solid matrices in liquid solutions or present on supported liquid membranes (SLM) can be used to sequester .sup.99 Tc from those liquids.

Katti, Kattesh V. (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Singh, Prahlad (Columbia, MO); Ketring, Alan R. (Columbia, MO)

1995-01-01T23:59:59.000Z

59

Shearing Flows in Liquid Crystal Models  

E-Print Network [OSTI]

The liquid crystal phase is a phase of matter between the solid and liquid phase whose flow is characterized by a velocity field and a director field which describes locally the orientation of the liquid crystal. In this ...

Dorn, Timothy

2012-05-31T23:59:59.000Z

60

Method of measuring a liquid pool volume  

DOE Patents [OSTI]

A method of measuring a molten metal liquid pool volume and in particular molten titanium liquid pools, including the steps of (a) generating an ultrasonic wave at the surface of the molten metal liquid pool, (b) shining a light on the surface of a molten metal liquid pool, (c) detecting a change in the frequency of light, (d) detecting an ultrasonic wave echo at the surface of the molten metal liquid pool, and (e) computing the volume of the molten metal liquid.

Garcia, Gabe V. (Las Cruces, NM); Carlson, Nancy M. (Idaho Falls, ID); Donaldson, Alan D. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Renewable Liquid Fuels Reforming | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Renewable Liquid Fuels Reforming The Program anticipates that distributed reforming of biomass-derived liquid fuels could be commercial during the transition to hydrogen and used...

62

Singular Limits in Polymer Stabilized Liquid Crystals  

E-Print Network [OSTI]

We investigate equilibrium configurations for a polymer stabilized liquid crys- tal material ... eling the cross section of the liquid crystal-polymer fiber composite.

1910-31-00T23:59:59.000Z

63

Liquid Hydrogen Delivery - Strategic Directions for Hydrogen...  

Broader source: Energy.gov (indexed) [DOE]

Liquid Hydrogen Delivery - Strategic Directions for Hydrogen Delivery Workshop Liquid Hydrogen Delivery - Strategic Directions for Hydrogen Delivery Workshop Targets, barriers and...

64

Haze Formation and Behavior in Liquid-Liquid Extraction Processes  

SciTech Connect (OSTI)

Aqueous haze formation and behavior was studied in the liquid-liquid system tri-n-butyl phosphate in odorless kerosene and 3M nitric acid with uranyl nitrate and cesium nitrate representing the major solute and an impurity, respectively. A pulsed column, mixer-settler and centrifugal contactor were chosen to investigate the effect of different turbulence characteristics on the manifestation of haze since these contactors exhibit distinct mixing phenomena. The dispersive processes of drop coalescence and breakage, and water precipitation in the organic phase were observed to lead to the formation of haze drops of {approx}1 um in diameter. The interaction between the haze and primary drops of the dispersion was critical to the separation efficiency of the liquid-liquid extraction equipment. Conditions of high power input and spatially homogeneous mixing enabled the haze drops to become rapidly assimilated within the dispersion to maximize the scrub performance and separation efficiency of the equipment.

Arm, Stuart T.; Jenkins, J. A.

2006-07-31T23:59:59.000Z

65

Hydrophobic ionic liquids  

DOE Patents [OSTI]

Ionic liquids having improved properties for application in non-aqueous batteries, electrochemical capacitors, electroplating, catalysis and chemical separations are disclosed. Exemplary compounds have one of the following formulas: ##STR1## wherein R.sub.1, R.sub.2, R.sub.3, R.sub.4, R.sub.5, and R.sub.6 are either H; F; separate alkyl groups of from 1 to 4 carbon atoms, respectively, or joined together to constitute a unitary alkylene radical of from 2 to 4 carbon atoms forming a ring structure converging on N; or separate phenyl groups; and wherein the alkyl groups, alkylene radicals or phenyl groups may be substituted with electron withdrawing groups, preferably F--, Cl--, CF.sub.3 --, SF.sub.5 --, CF.sub.3 S--, (CF.sub.3).sub.2 CHS-- or (CF.sub.3).sub.3 CS--; and X.sup.- is a non-Lewis acid-containing polyatomic anion having a van der Waals volume exceeding 100 .ANG..sup.3.

Koch, Victor R. (Lincoln, MA); Nanjundiah, Chenniah (Lynn, MA); Carlin, Richard T. (Nashua, NH)

1998-01-01T23:59:59.000Z

66

Hydrophobic ionic liquids  

DOE Patents [OSTI]

Ionic liquids having improved properties for application in non-aqueous batteries, electrochemical capacitors, electroplating, catalysis and chemical separations are disclosed. Exemplary compounds have one of the following formulas shown in a diagram wherein R{sub 1}, R{sub 2}, R{sub 3}, R{sub 4}, R{sub 5}, and R{sub 6} are either H; F; separate alkyl groups of from 1 to 4 carbon atoms, respectively, or joined together to constitute a unitary alkylene radical of from 2 to 4 carbon atoms forming a ring structure converging on N; or separate phenyl groups; and wherein the alkyl groups, alkylene radicals or phenyl groups may be substituted with electron withdrawing groups, preferably F-, Cl-, CF{sub 3}-, SF{sub 5}-, CF{sub 3}S-, (CF{sub 3}){sub 2}CHS- or (CF{sub 3}){sub 3}CS-; and X{sup {minus}} is a non-Lewis acid-containing polyatomic anion having a van der Waals volume exceeding 100 {angstrom}{sup 3}. 4 figs.

Koch, V.R.; Nanjundiah, C.; Carlin, R.T.

1998-10-27T23:59:59.000Z

67

Molecular Simulation of Henry's Constant at Vapor-Liquid and Liquid-Liquid Phase Richard J. Sadus  

E-Print Network [OSTI]

coexistence. 1. Introduction Henry's constant is a well-known measure of a solute's solubility in a particularMolecular Simulation of Henry's Constant at Vapor-Liquid and Liquid-Liquid Phase Boundaries Richard to determine Henry's constant from the residual chemical potential at infinite dilution at the vapor-liquid

68

Calculate viscosities for 355 liquids  

SciTech Connect (OSTI)

Liquid viscosities are important factors in process design and operation. The viscosity of a liquid determines its flow properties, such as velocity and pressure drop. In addition, the heat- and mass-transfer characteristics of a liquid are affected by its viscosity. An equation can be used to calculate liquid viscosities as a function of temperature. In the accompanying table, regression coefficients are included for 355 compounds with five, six or seven carbon atoms--generally the most-widely used in the chemical and petroleum industries. To calculate the viscosity of a liquid at any temperature between its melting and critical points (T[sub min] and T[sub max]), use the following equation: log[sub 10] [eta][sub liq] = A + B/T + CT + DT[sup 2] where [eta][sub liq] = viscosity, cP, A,B,C and D = regression coefficients, and T = liquid temperature, K. Insert the temperature into the equation along with the corresponding regression coefficients from the table. The chemical formulae are listed by the number of carbon atoms.

Yaws, C.L.; Lin, Xiaoyan; Li Bu (Lamar Univ., TX (United States))

1994-04-01T23:59:59.000Z

69

Adaptive Liquid Crystal Windows  

SciTech Connect (OSTI)

Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft 1ft prototype panels for the worlds first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicrons patented e-Tint technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of power consumption by ALCWs allows for on-board power electronics for automatic matching of transmission through windows to varying climate conditions without drawing the power from the power grid. ALCWs are capable of transmitting more sunlight in winters to assist in heating and less sunlight in summers to minimize overheating. As such, they can change the window from being a source of energy loss to a source of energy gain. In addition, the scalable AMIs roll-to-roll process, proved by making 1ft 1ftALCW prototype panels, allows for cost-effective production of large-scale window panels along with capability to change easily their color and shape. In addition to architectural glazing in houses and commercial buildings, ALCWs can be used in other applications where control of sunlight is needed, such as green houses, used by commercial produce growers and botanical gardens, cars, aircrafts, etc.

Taheri, Bahman; Bodnar, Volodymyr

2011-12-31T23:59:59.000Z

70

PHASE CHANGE LIQUIDS  

SciTech Connect (OSTI)

Work is being performed to develop a new shipping system for frozen environmental samples (or other materials) that uses an optimal phase change liquid (PCL) formulation and an insulated shipping container with an on-board digital temperature data logger to provide a history of the temperature profile within the container during shipment. In previous work, several PCL formulations with temperatures of fusion ranging from approximately -14 to -20 C were prepared and evaluated. Both temperature of fusion and heat of fusion of the formulations were measured, and an optimal PCL formulation was selected. The PCL was frozen in plastic bags and tested for its temperature profile in a cooler using a digital temperature data logger. This testing showed that the PCL formulation can maintain freezer temperatures (< -7 to -20 C) for an extended period, such as the time for shipping samples by overnight courier. The results of the experiments described in this report provide significant information for use in developing an integrated freezer system that uses a PCL formulation to maintain freezer temperatures in coolers for shipping environmental samples to the laboratory. Experimental results show the importance of the type of cooler used in the system and that use of an insulating material within the cooler improves the performance of the freezer system. A new optimal PCL formulation for use in the system has been determined. The new formulation has been shown to maintain temperatures at < -7 to -20 C for 47 hours in an insulated cooler system containing soil samples. These results are very promising for developing the new technology.

Susan S. Sorini; John F. Schabron

2006-03-01T23:59:59.000Z

71

Extremely Correlated Fermi Liquids B. Sriram Shastry  

E-Print Network [OSTI]

Extremely Correlated Fermi Liquids B. Sriram Shastry Physics Department, University of California the theory of an extremely correlated Fermi liquid with U ! 1. This liquid has an underlying auxiliary Fermi liquid Green's function that is further caparisoned by extreme correlations. The theory leads to two

California at Santa Cruz, University of

72

Commercialization of Coal-to-Liquids Technology  

SciTech Connect (OSTI)

The report provides an overview of the current status of coal-to-liquids (CTL) commercialization efforts, including an analysis of efforts to develop and implement large-scale, commercial coal-to-liquids projects to create transportation fuels. Topics covered include: an overview of the history of coal usage and the current market for coal; a detailed description of what coal-to-liquids technology is; the history of coal-to-liquids development and commercial application; an analysis of the key business factors that are driving the increased interest in coal-to-liquids; an analysis of the issues and challenges that are hindering the commercialization of coal-to-liquids technology; a review of available coal-to-liquids technology; a discussion of the economic drivers of coal-to-liquids project success; profiles of key coal-to-liquids developers; and profiles of key coal-to-liquids projects under development.

NONE

2007-08-15T23:59:59.000Z

73

Core-softened Fluids, Water-like Anomalies and the Liquid-Liquid Critical Points  

E-Print Network [OSTI]

. INTRODUCTION Water is characterized by well-known thermodynamic and kinetic liquid-state anomalies; for examplePREPRINT Core-softened Fluids, Water-like Anomalies and the Liquid-Liquid Critical Points Evy simulations are used to examine the relationship between water-like anoma- lies and the liquid-liquid critical

Barbosa, Marcia C. B.

74

Nanophosphor composite scintillator with a liquid matrix  

DOE Patents [OSTI]

An improved nanophosphor scintillator liquid comprises nanophosphor particles in a liquid matrix. The nanophosphor particles are optionally surface modified with an organic ligand. The surface modified nanophosphor particle is essentially surface charge neutral, thereby preventing agglomeration of the nanophosphor particles during dispersion in a liquid scintillator matrix. The improved nanophosphor scintillator liquid may be used in any conventional liquid scintillator application, including in a radiation detector.

McKigney, Edward Allen (Los Alamos, NM); Burrell, Anthony Keiran (Los Alamos, NM); Bennett, Bryan L. (Los Alamos, NM); Cooke, David Wayne (Santa Fe, NM); Ott, Kevin Curtis (Los Alamos, NM); Bacrania, Minesh Kantilal (Los Alamos, NM); Del Sesto, Rico Emilio (Los Alamos, NM); Gilbertson, Robert David (Los Alamos, NM); Muenchausen, Ross Edward (Los Alamos, NM); McCleskey, Thomas Mark (Los Alamos, NM)

2010-03-16T23:59:59.000Z

75

Liquid-phase chromatography detector  

DOE Patents [OSTI]

A liquid-phase chromatography detector comprises a flow cell having an inlet tubular conduit for receiving a liquid chromatographic effluent and discharging it as a flowing columnar stream onto a vertically adjustable receiving surface spaced apart from and located vertically below and in close proximity to the discharge end of the tubular conduit; a receiver adapted to receive liquid overflowing from the receiving surface; an exit conduit for continuously removing liquid from the receiver; a light source for focusing fluorescence-producing light pulses on the flowing columnar stream as it passes from the outlet of the conduit to the receiving surface and a fluorescence detector to detect the produced fluorescence; a source of light pulse for producing acoustic waves in the columnar stream as it passes from the conduit outlet to the receiving surface; and a piezoelectric transducer adapted to detect those waves; and a source of bias voltage applied to the inlet tubular conduit and adapted to produce ionization of the liquid flowing through the flow cell so as to produce photocurrents therein and an electrical system to detect and record the photocurrents. This system is useful in separating and detecting individual chemical compounds from mixtures thereof. 5 figs.

Voigtman, E.G.; Winefordner, J.D.; Jurgensen, A.R.

1983-11-08T23:59:59.000Z

76

Fragmentation of suddenly heated liquids  

SciTech Connect (OSTI)

Fragmentation of free liquids in Inertial Confinement Fusion reactors could determine the upper bound on reactor pulse rate. The x-ray ablated materials must cool and recondense to allow driver beam propagation. The increased surface area caused by fragmentation will enhance the cooling and condensation rates. Relaxation from the suddenly heated state will move a liquid into the negative pressure region under the liquid-vapor P-V dome. The lithium equation of state was used to demonstrate that neutron-induced vaporization uses only a minor fraction of the added heat, much less than would be required to drive the expansion. A 77% expansion of the lithium is required before the rapid vaporization process of spinodal decomposition could begin, and nucleation and growth are too slow to contribute to the expansion.

Blink, J.A.

1985-03-01T23:59:59.000Z

77

Liquid soap film generates electricity  

E-Print Network [OSTI]

We have observed that a rotating liquid soap film generates electricity when placed between two non-contact electrodes with a sufficiently large potential difference. In our experiments suspended liquid film (water + soap film) is formed on the surface of a circular frame, which is forced to rotate in the $x-y$ horizontal plane by a motor. This system is located at the center of two capacitor-like vertical plates to apply an external electric voltage difference in the $x-$direction. The produced electric current is collected from the liquid film using two conducting electrodes that are separated in the $y-$direction. We previously reported that a liquid film in an external electric field rotates when an electric current passes through it, naming it the liquid film motor (LFM). In this paper we report a novel technique, in which a similar device can be used as an electric generator, converting the rotating mechanical energy to electrical energy. The liquid film electric generator (LFEG) is in stark contrast to the LFM, both of which could be designed similarly in very small scales like micro scales with different applications. Although the device is comparable to commercial electric motors or electric generators, there is a significant difference in their working principles. Usually in an electric motor or generator the magnetic field causes the driving force, while in a LFM or LFEG the Coulomb force is the driving force. This fact is also interesting from the Bio-science point of view and brings a similarity to bio motors. Here we have investigated the electrical characteristics of such a generator for the first time experimentally and modelled the phenomenon with electroconvection governing equations. A numerical simulation is performed using the local approximation for the charge-potential relation and results are in qualitative agreement with experiments.

Ahmad Amjadi; Sadegh Feiz; Reza Montazeri Namin

2014-04-24T23:59:59.000Z

78

Method of measuring a liquid pool volume  

DOE Patents [OSTI]

A method of measuring a molten metal liquid pool volume and in particular molten titanium liquid pools is disclosed, including the steps of (a) generating an ultrasonic wave at the surface of the molten metal liquid pool, (b) shining a light on the surface of a molten metal liquid pool, (c) detecting a change in the frequency of light, (d) detecting an ultrasonic wave echo at the surface of the molten metal liquid pool, and (e) computing the volume of the molten metal liquid. 3 figures.

Garcia, G.V.; Carlson, N.M.; Donaldson, A.D.

1991-03-19T23:59:59.000Z

79

THERMODYNAMICS OF SOLID AND LIQUID GROUP III-V ALLOYS  

E-Print Network [OSTI]

a high temperature heat capacity for liquid gallium which isthe molar heat capacity of the stoichiometric liquid and theheat capacity of the supercooled stoichiometric binary liquid

Anderson, T.J.

2011-01-01T23:59:59.000Z

80

Stiffening solids with liquid inclusions  

E-Print Network [OSTI]

From bone and wood to concrete and carbon fibre, composites are ubiquitous natural and engineering materials. Eshelby's inclusion theory describes how macroscopic stress fields couple to isolated microscopic inclusions, allowing prediction of a composite's bulk mechanical properties from a knowledge of its microstructure. It has been extended to describe a wide variety of phenomena from solid fracture to cell adhesion. Here, we show experimentally and theoretically that Eshelby's theory breaks down for small liquid inclusions in a soft solid. In this limit, an isolated droplet's deformation is strongly size-dependent with the smallest droplets mimicking the behaviour of solid inclusions. Furthermore, in opposition to the predictions of conventional composite theory, we find that finite concentrations of small liquid inclusions enhance the stiffness of soft solids. A straight-forward extension of Eshelby's theory, accounting for the surface tension of the solid-liquid interface, explains our experimental observations. The counterintuitive effect of liquid-stiffening of solids is expected whenever droplet radii are smaller than an elastocapillary length, given by the ratio of the surface tension to Young's modulus of the solid matrix.

Robert W. Style; Rostislav Boltyanskiy; Benjamin Allen; Katharine E. Jensen; Henry P. Foote; John S. Wettlaufer; Eric R. Dufresne

2014-07-24T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT  

E-Print Network [OSTI]

of solid and liquid wastes generated at mushroom producing facilities. Environmental guidelines#12;MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT PHASE I: AUDIT OF CURRENT PRACTICE The Mushroom Waste Management Project (MWMP) was initiated by Environment Canada, the BC Ministry

82

Nanopatterned anchoring layers for liquid crystals  

E-Print Network [OSTI]

This thesis describes the theory and fabrication of inhomogeneous Liquid Crystal anchoring layers. While chemical anchoring techniques have proved useful for many applications, especially Liquid Crystal Displays, they have ...

Gear, Christopher S. (Christopher Stanwood)

2014-01-01T23:59:59.000Z

83

Can hedge funds time market liquidity?  

E-Print Network [OSTI]

We explore a new dimension of fund managers' timing ability by examining whether they can time market liquidity through adjusting their portfolios' market exposure as aggregate liquidity conditions change. Using a large ...

Cao, Charles

84

Mixing in a liquid metal electrode  

E-Print Network [OSTI]

Fluid mixing has first-order importance for many engineering problems in mass transport, including design and optimization of liquid-phase energy storage devices. Liquid metal batteries are currently being commercialized ...

Kelley, Douglas H.

85

Ionic Liquids for Utilization of Geothermal Energy  

Broader source: Energy.gov [DOE]

DOE Geothermal Program Peer Review 2010 - Presentation. Project objective: to develop ionic liquids for two geothermal energy related applications.

86

Heterophase liquid states: Thermodynamics, structure, dynamics  

E-Print Network [OSTI]

An overview of theoretical results and experimental data on the thermodynamics, structure and dynamics of the heterophase glass-forming liquids is presented. The theoretical approach is based on the mesoscopic heterophase fluctuations model (HPFM) developed within the framework of the bounded partition function approach. The Fischer cluster phenomenon, glass transition, liquid-liquid transformations, parametric phase diagram, cooperative dynamics and fragility of the glass-forming liquids is considered.

A. S. Bakai

2015-01-12T23:59:59.000Z

87

Nanoparticle enhanced ionic liquid heat transfer fluids  

DOE Patents [OSTI]

A heat transfer fluid created from nanoparticles that are dispersed into an ionic liquid is provided. Small volumes of nanoparticles are created from e.g., metals or metal oxides and/or alloys of such materials are dispersed into ionic liquids to create a heat transfer fluid. The nanoparticles can be dispersed directly into the ionic liquid during nanoparticle formation or the nanoparticles can be formed and then, in a subsequent step, dispersed into the ionic liquid using e.g., agitation.

Fox, Elise B.; Visser, Ann E.; Bridges, Nicholas J.; Gray, Joshua R.; Garcia-Diaz, Brenda L.

2014-08-12T23:59:59.000Z

88

Cooperative motions in supercooled liquids and glasses  

E-Print Network [OSTI]

P. Heat capacity and entropy of an equilibrium liquid fromliquids should correlate inversely with the con?gurational heat capacity,

Stevenson, Jacob D.

2009-01-01T23:59:59.000Z

89

Apparatus and method for spraying liquid materials  

DOE Patents [OSTI]

A method for spraying liquids involving a flow of gas which shears the liquid. A flow of gas is introduced in a converging-diverging nozzle where it meets and shears the liquid into small particles which are of a size and uniformity which can be controlled through adjustment of pressures and gas velocity. 5 figs.

Alvarez, J.L.; Watson, L.D.

1988-01-21T23:59:59.000Z

90

Commercialization of coal to liquids technology  

SciTech Connect (OSTI)

After an overview of the coal market, technologies for producing liquids from coal are outlined. Commercialisation of coal-to-liquid fuels, the economics of coal-to-liquids development and the role of the government are discussed. Profiles of 8 key players and the profiles of 14 projects are finally given. 17 figs., 8 tabs.

NONE

2007-07-01T23:59:59.000Z

91

Liquid Transportation Fuels from Coal and Biomass  

E-Print Network [OSTI]

Liquid Transportation Fuels from Coal and Biomass Technological Status, Costs, and Environmental Katzer #12;CHARGE TO THE ALTF PANEL · Evaluate technologies for converting biomass and coal to liquid for liquid fuels produced from coal or biomass. · Evaluate environmental, economic, policy, and social

92

Response functions near the liquid-liquid critical point of ST2 water  

E-Print Network [OSTI]

speci¿c heat capacity CP and the isothermal compressibility KT . We use two different methods: (i) fromResponse functions near the liquid-liquid critical point of ST2 water Erik Lascaris , T. A, and for four different system sizes, N = 63, 73, 83, and 93. We locate the liquid-liquid phase transition line

Stanley, H. Eugene

93

Erasing no-man's land by thermodynamically stabilizing the liquid-liquid transition in tetrahedral particles  

E-Print Network [OSTI]

compressibility KT and the isobaric heat capacity CP . In the LLCP hypothesis, the density anomalies of waterErasing no-man's land by thermodynamically stabilizing the liquid-liquid transition in tetrahedral, Sapienza, Universit´a di Roma, Piazzale Aldo Moro 2, I-00185, Roma, Italy. EFFECTS OF THE LIQUID-LIQUID

Loss, Daniel

94

Liquid/Liquid Interface Polymerized Porphyrin Membranes Displaying Size-Selective Molecular and Ionic Permeability  

E-Print Network [OSTI]

Liquid/Liquid Interface Polymerized Porphyrin Membranes Displaying Size-Selective Molecular: December 5, 2005 Thin polymeric membranes have been formed by liquid/liquid interfacial copolymerization of controllable thickness to be obtained.7 The polymerization of 1 was accomplished by condensation of porphyrin

95

Computation of liquid-liquid equilibrium in multicomponent electrolyte systems  

SciTech Connect (OSTI)

A computational algorithm for predicting liquid-liquid equilibrium (LLE) data, based on a generalization of the maximum likelihood method applied to implicit constraints, is presented. The algorithm accepts multicomponent data and binary interaction parameters. A comparative study of the models NRTL and electrolyte-NRTL, used for estimating activity coefficients in a quaternary electrolyte system, is presented and discussed. Results show that both models give accurate predictions and the algorithm presents a good performance without convergence or initialization problems. This suggests that the basic NRTL model can be used for describing phase behavior in weak electrolyte systems and the procedure can be of great use for design and optimization of processes involving multicomponent electrolyte systems. 9 refs., 1 fig., 1 tab.

Vianna, R.F.; d`Avila, S.G. [Universidade Estadual de Campinas (Brazil)

1996-12-31T23:59:59.000Z

96

TETRAALKYLPHOSPHONIUM POLYOXOMETALATES AS NOVEL IONIC LIQUIDS.  

SciTech Connect (OSTI)

The pairing of a Lindqvist or Keggin polyoxometalate (POM) anion with an appropriate tetraalkylphosphonium cation, [R{sub 3}R{prime}P]{sup +}, has been shown to yield an original family of ionic liquids (POM-ILs), among them salts liquid at or near ambient temperature. The physicochemical properties of several such 'inorganic liquids', in particular their thermal properties, suggests the possible application of these compounds as robust, thermally-stable solvents for liquid-liquid extraction. A preliminary evaluation of the potential of POM-ILs in this application is presented.

DIETZ,M.L.; RICKERT, P.G.; ANTONIO, M.R.; FIRESTONE, M.A.; WISHART, J.F.; SZREDER, T.

2007-11-30T23:59:59.000Z

97

Potential of distributed wood-based biopower systems serving basic electricity needs in rural Uganda  

E-Print Network [OSTI]

Uganda Thomas Buchholz a, , Izael Da Silva b a Department of Forestry and Natural Resource Management Uganda, P. O. Box 7062, Kampala Uganda a b s t r a c ta r t i c l e i n f o Article history: Received 23 Distributed electricity Fuelwood Electricity costs Current efforts to improve electricity services in Uganda

Vermont, University of

98

Alien liquid detector and control  

SciTech Connect (OSTI)

An alien liquid detector employs a monitoring element and an energizing circuit for maintaining the temperature of the monitoring element substantially above ambient temperature. For this purpose an electronic circit controls a flow of heating current to the monitoring element. The presence of an alien liquid is detected by sensing a predetermined change in heating current flow to the monitoring element, e.g., to distinguish between water and oil. In preferred embodiments the monitoring element is a thermistor whose resistance is compared with a reference resistance and heating current through the thermistor is controlled in accordance with the difference. In one embodiment a bridge circuit senses the resistance difference; the difference may be sensed by an operational amplifier arrangement. Features of the invention include positioning the monitoring element at the surface of water, slightly immersed, so that the power required to maintain the thermistor temperature substantially above ambient temperature serves to detect presence of oil pollution at the surface.

Potter, B.M.

1980-09-02T23:59:59.000Z

99

Catalyst for hydrotreating carbonaceous liquids  

DOE Patents [OSTI]

A catalyst for denitrogenating and desulfurating carbonaceous liquid such as solvent refined coal includes catalytic metal oxides impregnated within a porous base of mostly alumina with relatively large pore diameters, surface area and pore volume. The base material includes pore volumes of 0.7-0.85 ml/g, surface areas of 200-350 m.sup.2 /g and pore diameters of 85-200 Angstroms. The catalytic metals impregnated into these base materials include the oxides of Group VI metals, molybdenum and tungsten, and the oxides of Group VIII metals, nickel and cobalt, in various combinations. These catalysts and bases in combination have effectively promoted the removal of chemically combined sulfur and nitrogen within a continuous flowing mixture of carbonaceous liquid and hydrogen gas.

Berg, Lloyd (Bozeman, MT); McCandless, Frank P. (Bozeman, MT); Ramer, Ronald J. (Idaho Falls, ID)

1982-01-01T23:59:59.000Z

100

Membrane Separations of Liquid Mixtures  

E-Print Network [OSTI]

MEMBRANE SEPARATIONS OF LIQUID MIXTURES Douglas R. Lloyd Separations Research Program Department of Chemical Engineering The University of Texas at Austin Austin, Texas In recent years considerable attention has been given to the need... for reduced energy costs in the chemical processing industry. A major portion of the energy consumed in this industry is associated with the separation and recovery of chemicals. Membrane processes offer energy-efficient, cost effective methods...

Lloyd, D. R.

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Plasma-Surface Interactions on Liquids  

SciTech Connect (OSTI)

Liquid plasma-facing surfaces have been suggested as an option for advanced fusion devices, particularly in regions where solid materials may not survive over long operating periods. Because liquid surfaces can be replenished, they offer the possibility of tolerating intense particle bombardment and of recovering from off-normal events. As a preliminary step in understanding the nature of plasma-surface interactions on liquids, the authors consider some of the surface processes occurring in liquids undergoing irradiation by energetic particles. These include (1) sputtering, (2) segregation of liquid component species and impurities, (3) evaporation, and (4) trapping and release of incident particles. Aspects of these processes are examined for several candidate liquids, which represent three types of low-Z liquids: pure metals (Li), metallic alloys (Sn-Li), and compound insulators (Li{sub 2}BeF{sub 4}).

R. Bastasz; W. Eckstein

2000-05-01T23:59:59.000Z

102

Transient-Liquid-Phase and Liquid-Film-Assisted Joining ofCeramics  

SciTech Connect (OSTI)

Two joining methods, transient-liquid-phase (TLP) joining and liquid-film-assisted joining (LFAJ), have been used to bond alumina ceramics. Both methods rely on multilayer metallic interlayers designed to form thin liquid films at reduced temperatures. The liquid films either disappear by interdiffusion (TLP) or promote ceramic/metal interface formation and concurrent dewetting of the liquid film (LFAJ). Progress on extending the TLP method to lower temperatures by combining low-melting-point (<450 C) liquids and commercial reactive-metal brazes is described. Recent LFAJ work on joining alumina to niobium using copper films is presented.

Sugar, Joshua D.; McKeown, Joseph T.; Akashi, Takaya; Hong, SungM.; Nakashima, Kunihiko; Glaeser, Andreas M.

2005-02-09T23:59:59.000Z

103

Orifice mixing of immiscible liquids  

E-Print Network [OSTI]

solution (7). The present study of orif1ce mixing is a continuation of previous research on this project which yielded a relationship explaining the effect of operating conditions upon the format1on of 1nterfacial area for the system water-kerosene.... The experimental technique evolved by Helch (18), Vesselhoff (19), McNair (8), and Scott (IA) was changed only slightly. Their work on water-kerosene was repeated for the liquid pairs trichloroethylene-water, heptanol-water, 20 per oent aqueous sucrose-kerosene...

McDonough, Joseph Aloysius

1960-01-01T23:59:59.000Z

104

Mechanism of constitution liquid film migration  

SciTech Connect (OSTI)

Liquid film migration (LFM) in liquid phase sintering classically involves a large metastable liquid volume adjacent to solid, and migration occurs at an isolated solid-liquid (S-L) interface. Constitutional liquid film migration (CLFM), discovered in alloy 718, has major characteristics similar to those of LFM, except that the metastable liquid is from the constitutional liquation of precipitates on the grain boundary. The similarity between LFM and CLFM has led to the theory that coherency lattice strain responsible for LFM is also responsible for CLFM. The coherency strain hypothesis was tested in this study by evaluating whether the Hillert model of LFM would also apply for CLFM. Experimental results of CLFM in alloy 718 showed that migration velocity followed the trend predicted by the Hillert model. This indicates that the coherency strain hypothesis of LFM also applies for CLFM and that the coherency lattice strain responsible for LFM is also the driving force for CLFM.

NONE

1999-06-01T23:59:59.000Z

105

Flowing Liquid Crystal Simulating the Schwarzschild Metric  

E-Print Network [OSTI]

We show how to simulate the equatorial section of the Schwarzschild metric through a flowing liquid crystal in its nematic phase. Inside a liquid crystal in the nematic phase, a traveling light ray feels an effective metric, whose properties are linked to perpendicular and parallel refractive indexes, $n_o$ e $n_e$ respectively, of the rod-like molecule of the liquid crystal. As these indexes depend on the scalar order parameter of the liquid crystal, the Beris-Edwards hydrodynamic theory is used to connect the order parameter with the velocity of a liquid crystal flow at each point. This way we calculate a radial velocity profile that simulates the equatorial section of the Schwarzschild metric, in the region outside of Schwarzschild's radius, in the nematic phase of the liquid crystal. In our model, the higher flow velocity can be of the order of some meters per second.

Erms R. Pereira; Fernando Moraes

2010-11-21T23:59:59.000Z

106

Liquid metal cooled nuclear reactor plant system  

DOE Patents [OSTI]

A liquid metal cooled nuclear reactor having a passive cooling system for removing residual heat resulting for fuel decay during reactor shutdown, or heat produced during a mishap. The reactor system is enhanced with sealing means for excluding external air from contact with the liquid metal coolant leaking from the reactor vessel during an accident. The invention also includes a silo structure which resists attack by leaking liquid metal coolant, and an added unique cooling means.

Hunsbedt, Anstein (Los Gatos, CA); Boardman, Charles E. (Saratoga, CA)

1993-01-01T23:59:59.000Z

107

Gas well operation with liquid production  

SciTech Connect (OSTI)

Prediction of liquid loading in gas wells is discussed in terms of intersecting tubing or system performance curves with IPR curves and by using a more simplified critical velocity relationship. Different methods of liquid removal are discussed including such methods as intermittent lift, plunger lift, use of foam, gas lift, and rod, jet, and electric submersible pumps. Advantages, disadvantages, and techniques for design and application of the methods of liquid removal are discussed.

Lea, J.F.; Tighe, R.E.

1983-02-01T23:59:59.000Z

108

Adsorptive Drying of Organic Liquids- An Update  

E-Print Network [OSTI]

reactions lowering yields and compro mising product quality. In these several situations where liquids are involved, any of the following means may be used to lower the water content: Inert Gas Purging Liquid Extraction Freeze Drying Pervaporation... Fractional Distillation Adsorption Although fractional distillation and adsorption are almost exclusively used, the others are included to complete the list. Inert Gas Purging This method can be used to dry high boiling liquids such as gear oils...

Joshi, S.; Humphrey, J. L.; Fair, J. R.

109

Early Events in Ionic Liquid Radiation Chemistry  

SciTech Connect (OSTI)

Ionic liquids are interesting and useful materials whose solvation time scales are up to thousands of times longer than in conventional solvents. The extended lifetimes of pre-solvated electrons and other energetic species in ionic liquids has profound consequences for the radiolytic product distributions and reactivity patterns. We use a newly developed, multiplexed variation of pulse-probe spectroscopy to measure the kinetics of the early dynamical and reactive events in ionic liquids.

Wishart, J.F.; Cook, A.; Rimmer, R.D.; Gohdo, M.

2010-09-14T23:59:59.000Z

110

Hazardous Liquid Pipelines and Storage Facilities (Iowa)  

Broader source: Energy.gov [DOE]

This statute regulates the permitting, construction, monitoring, and operation of pipelines transporting hazardous liquids, including petroleum products and coal slurries. The definition used in...

111

Liquid phase sintering of silicon carbide  

DOE Patents [OSTI]

Liquid phase sintering is used to densify silicon carbide based ceramics using a compound comprising a rare earth oxide and aluminum oxide to form liquids at temperatures in excess of 1600.degree. C. The resulting sintered ceramic body has a density greater than 95% of its theoretical density and hardness in excess of 23 GPa. Boron and carbon are not needed to promote densification and silicon carbide powder with an average particle size of greater than one micron can be densified via the liquid phase process. The sintered ceramic bodies made by the present invention are fine grained and have secondary phases resulting from the liquid phase.

Cutler, Raymond A. (Bountiful, UT); Virkar, Anil V. (Salt Lake City, UT); Hurford, Andrew C. (Salt Lake City, UT)

1989-01-01T23:59:59.000Z

112

Onsite Wastewater Treatment Systems: Liquid Chlorination  

E-Print Network [OSTI]

This publication explains the process, components, legal requirements, factors affecting performance, and maintenance needs of liquid chlorination systems for onsite wastewater treatment....

Weaver, Richard; Lesikar, Bruce J.; Richter, Amanda; O'Neill, Courtney

2008-10-23T23:59:59.000Z

113

Liquid metal Flow Meter - Final Report  

SciTech Connect (OSTI)

Measuring the flow of liquid metal presents serious challenges. Current commercially-available flow meters use ultrasonic, electromagnetic, and other technologies to measure flow, but are inadequate for liquid metal flow measurement because of the high temperatures required by most liquid metals. As a result of the reactivity and high temperatures of most liquid metals, corrosion and leakage become very serious safety concerns. The purpose of this project is to develop a flow meter for Lockheed Martin that measures the flow rate of molten metal in a conduit.

Andersen C, Hoogendoom S, Hudson B, Prince J, Teichert K, Wood J, Chase K

2007-01-30T23:59:59.000Z

114

Closed-field capacitive liquid level sensor  

DOE Patents [OSTI]

A liquid level sensor based on a closed field circuit comprises a ring oscillator using a symmetrical array of plate units that creates a displacement current. The displacement current varies as a function of the proximity of a liquid to the plate units. The ring oscillator circuit produces an output signal with a frequency inversely proportional to the presence of a liquid. A continuous liquid level sensing device and a two point sensing device are both proposed sensing arrangements. A second set of plates may be located inside of the probe housing relative to the sensing plate units. The second set of plates prevent any interference between the sensing plate units.

Kronberg, J.W.

1995-01-01T23:59:59.000Z

115

Liquid composition having ammonia borane and decomposing to form hydrogen and liquid reaction product  

DOE Patents [OSTI]

Liquid compositions of ammonia borane and a suitably chosen amine borane material were prepared and subjected to conditions suitable for their thermal decomposition in a closed system that resulted in hydrogen and a liquid reaction product.

Davis, Benjamin L; Rekken, Brian D

2014-04-01T23:59:59.000Z

116

Pipe effect in viscous liquids  

E-Print Network [OSTI]

A detailed experimental and theoretical study has been performed about a phenomenon, not previously reported in the literature, occurring in highly viscous liquids: the formation of a definite pipe structure induced by the passage of a heavy body, this structure lasting for quite a long time. A very rich phenomenology (including mechanical, optical and structural effects) associated with the formation of the pipe has been observed in different liquids. Actually, the peculiar dynamical evolution of that structure does not appear as a trivial manifestation of standard relaxation or spurious effects. In particular we have revealed different time scales during the evolution of the pipe and a non-monotonous decreasing of the persistence time with decreasing viscosity (with the appearance of at least two different maxima). A microscopic model consistent with the experimental data, where the pipe behaves as a cylindrical dielectric shell, has been proposed. The general time evolution of the structure has been described in terms of a simple thermodynamical model, predicting several peculiarities effectively observed.

V. Capano; S. Esposito; G. Salesi

2008-12-23T23:59:59.000Z

117

Spiers Memorial Lecture Recent experimental advances in studies of liquid/liquid  

E-Print Network [OSTI]

complicated processes such as molecular transport across cell membranes. A variety of techniques have been on the interaction of a hydrophobic surface with water, and ion and solute transport across these and other liquid/hydrophilic properties of liquid/ liquid interfaces. In biological systems, protein folding and membrane formation rely

Richmond, Geraldine L.

118

Arrays and Cascades of Fluorescent Liquid-Liquid Waveguides: Broadband Light Sources for  

E-Print Network [OSTI]

Arrays and Cascades of Fluorescent Liquid-Liquid Waveguides: Broadband Light Sources) microchannel waveguides with liquid cores containing fluorescent dyes, excited by incident light from an external halogen bulb. Simultaneous use of multiple fluorophores in a common solution, in a single L2 light

Prentiss, Mara

119

Assessment of coal liquids as refinery feedstocks  

SciTech Connect (OSTI)

The R&D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650{degrees}F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

Zhou, P.

1992-02-01T23:59:59.000Z

120

Assessment of coal liquids as refinery feedstocks  

SciTech Connect (OSTI)

The R D of direct coal liquefaction has reached such a stage that current two-stage processes can produce coal liquids with high yields and improved quality at a reasonable cost. To fully realize the potential value, these coal liquids should be refined into high-value liquid transportation fuels. The purpose of this study is to assess coal liquids as feedstocks to be processed by modern petroleum refining technologies. After the introduction, Section 2.0 summarizes ASTM specifications for major transportation fuels: gasoline, jet fuel, and diesel fuel, which serve as a target for coal-liquid refining. A concise description of modern refining processes follows with an emphasis on the requirements for the raw materials. These provide criteria to judge the quality of coal liquids as a refinery feedstock for the production of marketable liquid fuels. Section 3.0 surveys the properties of coal liquids produced by various liquefaction processes. Compared with typical petroleum oils, the current two-stage coal liquids are: Light in boiling range and free of resids and metals; very low in sulfur but relatively high in oxygen; relatively low in hydrogen and high in cyclics content; and essentially toxicologically inactive when end point is lower than 650[degrees]F, particularly after hydroprocessing. Despite these characteristics, the coal liquids are basically similar to petroleum. The modern refining technology is capable of processing coal liquids into transportation fuels meeting all specifications, and hydroprocessinq is obviously the major tool. The important point is the determination of a reasonable product slate and an appropriate refining scheme.

Zhou, P.

1992-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Fiber-optic liquid level sensor  

DOE Patents [OSTI]

A fiber-optic liquid level sensor measures the height of a column of liquid through the hydrostatic pressure it produces. The sensor employs a fiber-optic displacement sensor to detect the pressure-induced displacement of the center of a corrugated diaphragm.

Weiss, Jonathan D. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

122

Liquid Biofuels Strategies and Policies in selected  

E-Print Network [OSTI]

June 2011 Liquid Biofuels Strategies and Policies in selected African Countries A review of some of the challenges, activities and policy options for liquid biofuels Prepared for PISCES by Practical Action Biofuels Strategies and Policies in selected African Countries Although this research is funded by DFID

123

CMD-3 Liquid Xenon Calorimeter's signals processing  

E-Print Network [OSTI]

CMD-3 Liquid Xenon Calorimeter's signals processing for timing measurements. Leonid Epshtein Budker connected to constitute 264 «towers»; signal of each tower is processed by electronic channel. Liquid Xenon functional channel scheme and signal's shapes in the typical point. Digital Signal Processing ADCCSALXe

124

Remarks on Liquid Wall Research Mohamed Abdou  

E-Print Network [OSTI]

Remarks on Liquid Wall Research Mohamed Abdou Professor Mechanical and Aerospace Engineering UCLA physicists and engineering scientists · Enhances synergism between IFE and MFE · Provides excellent disciplines. #12;Several "Ideas" Have Been Proposed for Liquid Walls Fluids 1) High-conductivity, low Pr

California at Los Angeles, University of

125

Dual liquid and gas chromatograph system  

DOE Patents [OSTI]

A chromatographic system that utilizes one detection system for gas chromatographic and micro-liquid chromatographic determinations. The detection system is a direct-current, atmospheric-pressure, helium plasma emission spectrometer. The detector utilizes a non-transparent plasma source unit which contains the plasma region and two side-arms which receive effluents from the micro-liquid chromatograph and the gas chromatograph. The dual nature of this chromatographic system offers: (1) extreme flexibility in the samples to be examined; (2) extremely low sensitivity; (3) element selectivity; (4) long-term stability; (5) direct correlation of data from the liquid and gas samples; (6) simpler operation than with individual liquid and gas chromatographs, each with different detection systems; and (7) cheaper than a commercial liquid chromatograph and a gas chromatograph.

Gay, Don D. (Aiken, SC)

1985-01-01T23:59:59.000Z

126

Sewage sludge dewatering using flowing liquid metals  

DOE Patents [OSTI]

A method and apparatus for reducing the moisture content of a moist sewage sludge having a moisture content of about 50% to 80% and formed of small cellular micro-organism bodies having internally confined water is provided. A hot liquid metal is circulated in a circulation loop and the moist sewage sludge is injected in the circulation loop under conditions of temperature and pressure such that the confined water vaporizes and ruptures the cellular bodies. The vapor produced, the dried sludge, and the liquid metal are then separated. Preferably, the moist sewage sludge is injected into the hot liquid metal adjacent the upstream side of a venturi which serves to thoroughly mix the hot liquid metal and the moist sewage sludge. The venturi and the drying zone after the venturi are preferably vertically oriented. The dried sewage sludge recovered is available as a fuel and is preferably used for heating the hot liquid metal.

Carlson, Larry W. (Oswego, IL)

1986-01-01T23:59:59.000Z

127

Liquid crystal device and method thereof  

DOE Patents [OSTI]

The invention provides a liquid crystal device and method thereof. Subsequent to applying a first electrical voltage on a liquid crystal to induce a reorientation of the liquid crystal, a second electrical voltage with proper polarity is applied on the liquid crystal to assist the relaxation of the reorientation that was induced by the first electrical voltage. The "switch-off" phase of the liquid crystal can therefore be accelerated or temporally shortened, and the device can exhibit better performance such as fast response to on/off signals. The invention can be widely used LCD, LC shutter, LC lens, spatial light modulator, telecommunication device, tunable filter, beam steering device, and electrically driven LC device, among others.

Shiyanovskii, Sergij V; Gu, Mingxia; Lavrentovich, Oleg D

2012-10-23T23:59:59.000Z

128

On the Fluctuations that Order and Frustrate Liquid Water  

E-Print Network [OSTI]

Most nonpolar liquids have heat capacities that range from 8the maximum liquid state heat capacity[173]. ExperimentallyLIQUID AND SOLID WATER (a) Density (b) Compressibility (c) Heat Capacity

Limmer, David

2013-01-01T23:59:59.000Z

129

Technical Assessment of Organic Liquid Carrier Hydrogen Storage...  

Broader source: Energy.gov (indexed) [DOE]

and long cycle life, and that remain liquid over the working temperature range. Air Products and Chemicals Inc (APCI) investigated many candidates for potential liquid...

130

Ionic Liquid Pretreatment Process for Biomass Is Successfully...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ionic Liquid Pretreatment Process for Biomass Is Successfully Implemented at Larger Scale Ionic Liquid Pretreatment Process for Biomass Is Successfully Implemented at Larger Scale...

131

Low-Emissions Burner Technology using Biomass-Derived Liquid...  

Broader source: Energy.gov (indexed) [DOE]

Emissions Burner Technology using Biomass-Derived Liquid Fuels Low-Emissions Burner Technology using Biomass-Derived Liquid Fuels This factsheet describes a project that developed...

132

Enabling Small-Scale Biomass Gasification for Liquid Fuel Production...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Enabling Small-Scale Biomass Gasification for Liquid Fuel Production Enabling Small-Scale Biomass Gasification for Liquid Fuel Production Breakout Session 2A-Conversion...

133

New lithium-based ionic liquid electrolytes that resist salt...  

Energy Savers [EERE]

lithium-based ionic liquid electrolytes that resist salt concentration polarization New lithium-based ionic liquid electrolytes that resist salt concentration polarization...

134

Ionic Liquid-Enhanced Solid State Electrolyte Interface (SEI...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Liquid-Enhanced Solid State Electrolyte Interface (SEI) for Lithium Sulfur Batteries. Ionic Liquid-Enhanced Solid State Electrolyte Interface (SEI) for Lithium Sulfur Batteries....

135

Distributed Reforming of Renewable Liquids via Water Splitting...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Renewable Liquids via Water Splitting using Oxygen Transport Membrane (OTM) (Presentation) Distributed Reforming of Renewable Liquids via Water Splitting using Oxygen Transport...

136

antiferroelectric liquid crystals: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of phases in antiferroelectric liquid crystals Condensed Matter (arXiv) Summary: The free energy of antiferroelectric liquid crystal which takes into account polar order...

137

antiferroelectric liquid crystal: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of phases in antiferroelectric liquid crystals Condensed Matter (arXiv) Summary: The free energy of antiferroelectric liquid crystal which takes into account polar order...

138

alcohol liquid diet: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

biodiesel. Open Access Theses and Dissertations Summary: ??The most widely used process technology for biodiesel manufacture is the base-catalysed liquid-liquid...

139

Agenda for the Derived Liquids to Hydrogen Distributed Reforming...  

Broader source: Energy.gov (indexed) [DOE]

Agenda for the Derived Liquids to Hydrogen Distributed Reforming Working Group (BILIWG) Hydrogen Production Technical Team Research Review Agenda for the Derived Liquids to...

140

Formation of iron complexs from trifluoroacetic acid based liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of iron complexs from trifluoroacetic acid based liquid chromatography mobile phases as interference ions in liquid Formation of iron complexs from trifluoroacetic acid based...

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Formation of Supercooled Liquid Solutions from Nanoscale Amorphous...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Supercooled Liquid Solutions from Nanoscale Amorphous Solid Films of Methanol and Ethanol. Formation of Supercooled Liquid Solutions from Nanoscale Amorphous Solid Films of...

142

Mixing it up - Measuring diffusion in supercooled liquid solutions...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mixing it up - Measuring diffusion in supercooled liquid solutions of methanol and ethanol at temperatures near the glass Mixing it up - Measuring diffusion in supercooled liquid...

143

Case Study: Evaluating Liquid versus Air Cooling in the Maui...  

Broader source: Energy.gov (indexed) [DOE]

Case Study: Evaluating Liquid versus Air Cooling in the Maui High Performance Computing Center Case Study: Evaluating Liquid versus Air Cooling in the Maui High Performance...

144

EECBG Creating Liquidity for Energy Efficiency Loans in Secondary...  

Broader source: Energy.gov (indexed) [DOE]

EECBG Creating Liquidity for Energy Efficiency Loans in Secondary Markets (Text Version) EECBG Creating Liquidity for Energy Efficiency Loans in Secondary Markets (Text Version)...

145

Creating Liquidity for Energy Efficiency Loans in Secondary Markets...  

Broader source: Energy.gov (indexed) [DOE]

Creating Liquidity for Energy Efficiency Loans in Secondary Markets Creating Liquidity for Energy Efficiency Loans in Secondary Markets Provides information on secondary markets in...

146

Improved peptide elution time prediction for reversed-phase liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

peptide elution time prediction for reversed-phase liquid chromatography-MS by incorporating peptide sequence Improved peptide elution time prediction for reversed-phase liquid...

147

Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Computer Simulations Indicate Calcium Carbonate Has a Dense Liquid Phase Berkeley Lab research could help...

148

Experimental and Modeling Studies of the Characteristics of Liquid...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Experimental and Modeling Studies of the Characteristics of Liquid Biofuels for Enhanced Combustion Experimental and Modeling Studies of the Characteristics of Liquid Biofuels for...

149

Elucidating graphene - Ionic Liquid interfacial region: a combined...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

graphene - Ionic Liquid interfacial region: a combined experimental and computational study. Elucidating graphene - Ionic Liquid interfacial region: a combined experimental and...

150

DOE Selects Savannah River Remediation, LLC for Liquid Waste...  

Energy Savers [EERE]

objective of the Liquid Waste contract is to achieve closure of the SRS liquid waste tanks in compliance with the Federal Facilities Agreement, utilizing the Defense Waste...

151

Dielectric liquid ionization chambers for detecting fast neutrons  

E-Print Network [OSTI]

Three ionization chambers with different geometries have been constructed and filled with dielectric liquids for detection of fast neutrons. The three dielectric liquids studied were Tetramethylsilane (TMS), Tetramethylpentane ...

Boyd, Erin M

2008-01-01T23:59:59.000Z

152

Energetics of Hydrogen Bond Network Rearrangements in Liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energetics of Hydrogen Bond Network Rearrangements in Liquid Water Print The unique chemical and physical properties of liquid water are thought to result from the highly...

153

Liquid-liquid equilibria of fuel oxygenate + water + hydrocarbon mixtures. 3: Effect of temperature  

SciTech Connect (OSTI)

The authors have measured the ternary liquid-liquid equilibria of water + ethanol mixtures with, separately, 2,2,4-trimethylpentane and toluene at 5 and 40 C, water + tert-amyl alcohol (TAOH) mixtures with, separately, toluene and hexane at 5 and 40 C, and of water + TAOH + pentane mixtures at 5 C. The ethanol-containing systems exhibit type 1 liquid-liquid phase behavior, and the TAOH-containing systems exhibit type 2 behavior. These data, together with the data they have previously reported at 25 C, provide information on how the liquid-liquid equilibria of these systems change as a function of temperature. While the addition of ethanol is found to increase the solubility of hydrocarbons in the aqueous phase, the concentration of the hydrocarbon in the water-rich phase decreases with increasing temperature. With the exception of hydrocarbon in the water-rich phase, the experimental data could be correlated quite well with either the UNIQUAC or NRTL models. For most of the systems considered here the predictions of the phase behavior with the liquid-liquid UNIFAC group-contribution model are only qualitatively correct. However, the liquid-liquid UNIFAC model erroneously predicts type 2 phase behavior to occur for water + ethanol + 2,2,4-trimethylpentane system at 5 C.

Wagner, G. [Universitaet Karlsruhe (Germany). Institut fuer Thermische Verfahrenstechnik; Sandler, S.I. [Univ. of Delaware, Newark, DE (United States). Center for Molecular and Engineering Thermodynamics

1995-09-01T23:59:59.000Z

154

Viscosity of a nanoconfined liquid during compression  

SciTech Connect (OSTI)

The viscous behavior of liquids under nanoconfinement is not well understood. Using a small-amplitude atomic force microscope, we found bulk-like viscosity in a nanoconfined, weakly interacting liquid. A further decrease in viscosity was observed at confinement sizes of a just few molecular layers. Overlaid over the continuum viscous behavior, we measured non-continuum stiffness and damping oscillations. The average stiffness of the confined liquid was found to scale linearly with the size of the confining tip, while the damping scales with the radius of curvature of the tip end.

Khan, Shah H. [Institute of Physics and Electronics, University of Peshawar, Peshawar 25120 (Pakistan); Kramkowski, Edward L.; Ochs, Peter J.; Wilson, David M.; Hoffmann, Peter M., E-mail: hoffmann@wayne.edu [Department of Physics and Astronomy, Wayne State University, Detroit, Michigan 48201 (United States)

2014-01-13T23:59:59.000Z

155

Fermi liquid theory for high temperature superconductors  

SciTech Connect (OSTI)

In this article the Fermi liquid theory of metals is discussed starting from Luttinger's theorem. The content of Luttinger's Theorem and its implications for microscopic theories of high temperature superconductors are discussed. A simple quasi-2d Fermi liquid theory is introduced and some of its properties are calculated. It is argued that a number of experiments on YBa/sub 2/Cu/sub 3/O/sub 6+x/, x > 0.5, strongly suggest the existence of a Fermi surface and thereby a Fermi liquid normal state. 25 refs., 1 fig.

Bedell, K.S.

1988-01-01T23:59:59.000Z

156

Light Collection in Liquid Noble Gases  

SciTech Connect (OSTI)

Liquid noble gases are increasingly used as active detector materials in particle and nuclear physics. Applications include calorimeters and neutrino oscillation experiments as well as searches for neutrinoless double beta decay, direct dark matter, muon electron conversion, and the neutron electric dipole moment. One of the great advantages of liquid noble gases is their copious production of ultraviolet scintillation light, which contains information about event energy and particle type. I will review the scintillation properties of the various liquid noble gases and the means used to collect their scintillation light, including recent advances in photomultiplier technology and wavelength shifters.

McKinsey, Dan [Yale University

2013-05-29T23:59:59.000Z

157

Electron localization in liquid acetonitrile.  

SciTech Connect (OSTI)

Time-resolved one- and two-pulse laser dc photoconductivity has been used to observe two kinds of reducing species, anion-1 and anion-2, in liquid acetonitrile. At 25 C, the standard enthalpy of conversion from anion-1 to anion-2 is -44.3 {+-} 3.6 kJ/mol and the conversion time is 3 ns. The high-temperature form, anion-1, absorbs in the IR and migrates >3.3 times faster than any other ion in acetonitrile. This rapid migration has a low activation energy of 3.2 kJ/mol (vs 7.6 kJ/mol for other ions). Anion-1 rapidly transfers the electron to acceptors with high electron affinity, with rate constant up to 10{sup 11} M{sup -1} s{sup -1}. The low-temperature form, anion-2, absorbs in the visible and exhibits normal mobility and electron-transfer rates, ca. 1.5 x 10{sup 10} M{sup -1} s{sup -1}. It reacts, by proton transfer, with two hydrogen-bonded molecules of water and/or aliphatic alcohols. Laser photoexcitation of these two solvent anions in their respective absorption bands leads to the formation of CH{sub 3} and CN{sup -}. We present arguments indicating that anion-2 is a dimer radical anion of acetonitrile, whereas anion-1 is a multimer radical anion that may be regarded as a 'solvated electron'.

Shkrob, I. A.; Sauer, M. C.; Chemistry

2002-10-03T23:59:59.000Z

158

Liquid and liquidgas flows at all speeds  

SciTech Connect (OSTI)

All speed flows and in particular low Mach number flow algorithms are addressed for the numerical approximation of the Kapila et al. [1] multiphase flow model. This model is valid for fluid mixtures evolving in mechanical equilibrium but out of temperature equilibrium and is efficient for material interfaces computation separating miscible and non-miscible fluids. In this context, the interface is considered as a numerically diffused zone, captured as well as all present waves (shocks, expansion waves). The same flow model can be used to solve cavitating and boiling flows [2]. Many applications occurring with liquidgas interfaces and cavitating flows involve a very wide range of Mach number, from 10{sup ?3} to supersonic (and even hypersonic) conditions with respect to the mixture sound speed. It is thus important to address numerical methods free of restrictions regarding the Mach number. To do this, a preconditioned Riemann solver is built and embedded into the Godunov explicit scheme. It is shown that this method converges to exact solutions but needs too small time steps to be efficient. An implicit version is then derived, first in one dimension and second in the frame of 2D unstructured meshes. Two-phase flow preconditioning is then addressed in the frame of the Saurel et al. [3] algorithm. Modifications of the preconditioned Riemann solver are needed and detailed. Convergence of both single phase and two-phase numerical solutions are demonstrated with the help of single phase and two-phase steady nozzle flow solutions. Last, the method is illustrated by the computation of real cavitating flows in Venturi nozzles. Vapour pocket size and instability frequencies are reproduced by the model and method without using any adjustable parameter.

LeMartelot, S., E-mail: sebastien.lemartelot@polytech.univ-mrs.fr [Polytech'Marseille, Aix-Marseille University, UMR CNRS 7343 IUSTI, 5 rue E. Fermi, 13453 Marseille Cedex 13 (France); Nkonga, B., E-mail: boniface.nkonga@unice.fr [RS2N, Bastidon de la Caou, 13360 Roquevaire (France); University of Nice, LJAD UMR CNRS 7351, Parc Valrose, 06108 Nice Cedex (France); Saurel, R., E-mail: richard.saurel@polytech.univ-mrs.fr [Polytech'Marseille, Aix-Marseille University, UMR CNRS 7343 IUSTI, 5 rue E. Fermi, 13453 Marseille Cedex 13 (France); RS2N, Bastidon de la Caou, 13360 Roquevaire (France); University Institute of France, 5 rue E. Fermi, 13453 Marseille Cedex 13 (France)

2013-12-15T23:59:59.000Z

159

Liquid metal cooled divertor for ARIES  

SciTech Connect (OSTI)

A liquid metal, Ga-cooled divertor design was completed for the double null ARIES-II divertor design. The design analysis indicated a surface heat flux removal capability of up to 15 MW/m{sup 2}, and its relative easy maintenance. Design issues of configuration, thermal hydraulics, thermal stresses, liquid metal loop and safety effects were evaluated. For coolant flow control, it was found that it is necessary to use some part of the blanket cooling ducts for the draining of liquid metal from the top divertor. In order to minimize the inventory of Ga, it was recommended that the liquid metal loop equipment should be located as close to the torus as possible. More detailed analysis of transient conditions especially under accident conditions was identified as an issue that will need to be addressed.

Muraviev, E. [Gosudarstvennyj Komitet po Ispol`zovaniyu Atomnoj Ehnergii SSSR, Moscow (Russian Federation). Inst. Atomnoj Ehnergii

1995-01-01T23:59:59.000Z

160

Liquid Lithium Experiments in CDX-U  

SciTech Connect (OSTI)

The initial results of experiments involving the use of liquid lithium as a plasma facing component in the Current Drive Experiment-Upgrade (CDX-U) are reported. Studies of the interaction of a steady-state plasma with liquid lithium in the Plasma Interaction with Surface and Components Experimental Simulator (PISCES-B) are also summarized. In CDX-U a solid or liquid lithium covered rail limiter was introduced as the primary limiting surface for spherical torus discharges. Deuterium recycling was observed to be reduced, but so far not eliminated, for glow discharge-cleaned lithium surfaces. Some lithium influx was observed during tokamak operation. The PISCES-B results indicate that the rates of plasma erosion of lithium can exceed predictions by an order of magnitude at elevated temperatures. Plans to extend the CDX-U experiments to large area liquid lithium toroidal belt limiters are also described.

R. Majeski; R. Doerner; R. Kaita; G. Antar; J. Timberlake; et al

2000-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Removal of arsenic compounds from petroliferous liquids  

DOE Patents [OSTI]

Described is a process for removing arsenic from petroliferous derived liquids by contacting said liquid at an elevated temperature with a divinylbenzene-crosslinked polystyrene having catechol ligands anchored thereon. Also, described is a process for regenerating spent catecholated polystyrene by removal of the arsenic bound to it from contacting petroliferous liquid as described above and involves: a. treating said spent catecholated polystyrene, at a temperature in the range of about 20.degree. to 100.degree. C. with an aqueous solution of at least one carbonate and/or bicarbonate of ammonium, alkali and alkaline earth metals, said solution having a pH between about 8 and 10 and, b. separating the solids and liquids from each other. Preferably the regeneration treatment is in two steps wherein step (a) is carried out with an aqueous alcoholic carbonate solution containing lower alkyl alcohol, and, steps (a) and (b) are repeated using a bicarbonate.

Fish, Richard H. (Berkeley, CA)

1985-01-01T23:59:59.000Z

162

Experimental investigation on liquid behaviors in nanopores  

E-Print Network [OSTI]

an nd as an ex xternal pressu ure is applie ed, the liquid d190 mm/min. Wh hen the pressu ure reached ab bout 50 MPa, ,

Lu, Weiyi

2011-01-01T23:59:59.000Z

163

Accelerated Animation of Liquid Splash Roman Durikovic  

E-Print Network [OSTI]

step and viscosity. The final liquid surface is obtained from the velocity field by rough estimation small fluid objects such as splash and spray. Our final goal is to develop a real-time system

Durikovic, Roman

164

Phosphonium-based ionic liquids and uses  

DOE Patents [OSTI]

Phosphonium-based room temperature ionic liquids ("RTILs") were prepared. They were used as matrices for Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry and also for preparing samples of dyes for analysis.

Del Sesto, Rico E; Koppisch, Andrew T; Lovejoy, Katherine S; Purdy, Geraldine M

2014-12-30T23:59:59.000Z

165

Future of Liquid Biofuels for APEC Economies  

SciTech Connect (OSTI)

This project was initiated by APEC Energy Working Group (EWG) to maximize the energy sector's contribution to the region's economic and social well-being through activities in five areas of strategic importance including liquid biofuels production and development.

Milbrandt, A.; Overend, R. P.

2008-05-01T23:59:59.000Z

166

Liquid--liquid equilibria by use of UNIFAC for gasohol extraction systems  

SciTech Connect (OSTI)

A synthetic naphtha cut composed of a mixture of paraffinic, aromatic, and naphthenic hydrocarbons has been studied as a solvent to directly produce gasohol. The equilibria in these highly nonideal liquid mixtures has been estimated by the UNIFAC group contribution method. The process would appear to be simple and direct to produce gasohol by liquid--liquid extraction with this naphtha and could compete with existing azeotropic distillation processes.

Furzer, I.A.

1984-04-01T23:59:59.000Z

167

Equilibration of a spinless Luttinger liquid.  

SciTech Connect (OSTI)

We study how a Luttinger liquid of spinless particles in one dimension approaches thermal equilibrium. Full equilibration requires processes of backscattering of excitations, which occur at energies of the order of the bandwidth. Such processes are not accounted for by the Luttinger-liquid theory. We treat the high-energy excitations as mobile impurities and derive an expression for the equilibration rate in terms of their spectrum. Our results apply at any interaction strength.

Matveev, K. A.; Andreev, A. V. (Materials Science Division); (Univ. Washington)

2012-01-01T23:59:59.000Z

168

Nonconventional Liquid Fuels (released in AEO2006)  

Reports and Publications (EIA)

Higher prices for crude oil and refined petroleum products are opening the door for nonconventional liquids to displace petroleum in the traditional fuel supply mix. Growing world demand for diesel fuel is helping to jump-start the trend toward increasing production of nonconventional liquids, and technological advances are making the nonconventional alternatives more viable commercially. Those trends are reflected in the Annual Energy Outlook 2006 projections.

2006-01-01T23:59:59.000Z

169

The absorption of ultrasonic waves in liquids  

E-Print Network [OSTI]

Vee ~ ~ ~ ~ a ~ ~ ~ ~ ~ ~ a ~ e ~ ~ ~ ~ a ~ ~ ea ~ ~ ~ eee ~ ~ ~ ~ ~ ~ ea ~ ~ ~ ~ 2 ~ ?easursasnt of ths Prop-:. ties of:asss and Liquids by Ultrasonicseae ~ ~ ~ ~ ~ e ~ ~ ~ ~ ~ ~ ~ ~ e ~ ~ dies Borne erscsnt Theories ConcsrrrinS the Oisorsparrcy 3e tween... ~ ~ ~ ~ ~ ~ ~ o 3Q VI, Plot of' Los A /A vs~ Sound Path Length Ital ZthoI' 1Mox' Ppoalul'oe ~ ~ a ~ y ~ ~ s ~ ~ ~ ~ ~ ~ e ~ ~ ~ e s ~ ~ ~ ~ e ~ ~ a ~ ~ 3) xxeasuraaents oa the absorption of high frequency souad. waves ia liquids axe useful ia studying...

Hudson, Paul A

2012-06-07T23:59:59.000Z

170

Photosensitive dopants for liquid noble gases  

DOE Patents [OSTI]

In an ionization type detector for high energy radiation wherein the energy of incident radiation is absorbed through the ionization of a liquid noble gas and resulting free charge is collected to form a signal indicative of the energy of the incident radiation, an improvement comprising doping the liquid noble gas with photosensitive molecules to convert scintillation light due to recombination of ions, to additional free charge.

Anderson, David F. (Wheaton, IL)

1988-01-01T23:59:59.000Z

171

Superbase-derived protic ionic liquids  

DOE Patents [OSTI]

Protic ionic liquids having a composition of formula (A.sup.-)(BH.sup.+) wherein A.sup.- is a conjugate base of an acid HA, and BH.sup.+ is a conjugate acid of a superbase B. In particular embodiments, BH.sup.+ is selected from phosphazenium species and guanidinium species encompassed, respectively, by the general formulas: ##STR00001## The invention is also directed to films and membranes containing these protic ionic liquids, with particular application as proton exchange membranes for fuel cells.

Dai, Sheng; Luo, Huimin; Baker, Gary A.

2013-09-03T23:59:59.000Z

172

Behavior of Supercooled Aqueous Solutions Stemming from Hidden Liquid-Liquid Transition in Water  

E-Print Network [OSTI]

A popular hypothesis that explains the anomalies of supercooled water is the existence of a metastable liquid-liquid transition hidden below the line of homogeneous nucleation. If this transition exists and if it is terminated by a critical point, the addition of a solute should generate a line of liquid-liquid critical points emanating from the critical point of pure metastable water. We have analyzed thermodynamic consequences of this scenario. In particular, we consider the behavior of two systems, H2O-NaCl and H2O-glycerol. We find the behavior of the heat capacity in supercooled aqueous solutions of NaCl, as reported by Archer and Carter, to be consistent with the presence of the metastable liquid-liquid transition. We suggest an interpretation of the liquid-liquid transition in aqueous solutions of glycerol, recently observed by Murata and Tanaka, elucidating the non-conserved nature of the order parameter, its coupling with density and concentration, and the peculiarity of "spinodal decomposition without phase separation". We also show how the shape of the critical line in a solution controls the difference in concentration of the coexisting liquid phases.

John W. Biddle; Vincent Holten; Mikhail A. Anisimov

2014-08-21T23:59:59.000Z

173

Liquid fuels production from biomass. Final report  

SciTech Connect (OSTI)

The current program to convert biomass into liquid hydrocarbon fuels is an extension of a previous program to ferment marine algae to acetic acid. In that study it was found that marine algae could be converted to higher aliphatic organic acids and that these acids could be readily removed from the fermentation broth by membrane or liquid-liquid extraction. It was then proposed to convert these higher organic acids via Kolbe electrolysis to aliphatic hydrocarbons, which may be used as a diesel fuel. The specific goals for the current porgram are: (1) establish conditions under which substrates other than marine algae may be converted in good yield to organic acids, here the primary task is methane suppression; (2) modify the current 300-liter fixed packed bed batch fermenter to operate in a continuous mode; (3) change from membrane extraction of organic acids to liquid-liquid extraction; (4) optimize the energy balance of the electrolytic oxidation process, the primary task is to reduce the working potential required for the electrolysis while maintaining an adequate current density; (5) scale the entire process up to match the output of the 300 liter fermenter; and (6) design pilot plant and commercial size plant (1000 tons/day) processes for converting biomass to liquid hydrocarbon fuels and perform an economic analysis for the 1000 ton/day design.

Levy, P. F.; Sanderson, J. E.; Ashare, E.; Wise, D. L.; Molyneaux, M. S.

1980-06-30T23:59:59.000Z

174

Process for stabilization of coal liquid fractions  

DOE Patents [OSTI]

Coal liquid fractions to be used as fuels are stabilized against gum formation and viscosity increases during storage, permitting the fuel to be burned as is, without further expensive treatments to remove gums or gum-forming materials. Stabilization is accomplished by addition of cyclohexanol or other simple inexpensive secondary and tertiary alcohols, secondary and tertiary amines, and ketones to such coal liquids at levels of 5-25% by weight with respect to the coal liquid being treated. Cyclohexanol is a particularly effective and cost-efficient stabilizer. Other stabilizers are isopropanol, diphenylmethanol, tertiary butanol, dipropylamine, triethylamine, diphenylamine, ethylmethylketone, cyclohexanone, methylphenylketone, and benzophenone. Experimental data indicate that stabilization is achieved by breaking hydrogen bonds between phenols in the coal liquid, thereby preventing or retarding oxidative coupling. In addition, it has been found that coal liquid fractions stabilized according to the invention can be mixed with petroleum-derived liquid fuels to produce mixtures in which gum deposition is prevented or reduced relative to similar mixtures not containing stabilizer.

Davies, Geoffrey (Boston, MA); El-Toukhy, Ahmed (Alexandria, EG)

1987-01-01T23:59:59.000Z

175

Damping of liquid sloshing by foams  

E-Print Network [OSTI]

When a container is set in motion, the free surface of the liquid starts to oscillate or slosh. Such effects can be observed when a glass of water is handled carelessly and the fluid sloshes or even spills over the rims of the container. However, beer does not slosh as readily as water, which suggests that foam could be used to damp sloshing. In this work, we study experimentally the effect on sloshing of a liquid foam placed on top of a liquid bath. We generate a monodisperse two-dimensional liquid foam in a rectangular container and track the motion of the foam. The influence of the foam on the sloshing dynamics is experimentally characterized: only a few layers of bubbles are sufficient to significantly damp the oscillations. We rationalize our experimental findings with a model that describes the foam contribution to the damping coefficient through viscous dissipation on the walls of the container. Then we extend our study to confined three-dimensional liquid foam and observe that the behavior of 2D and confined 3D systems are very similar. Thus we conclude that only the bubbles close to the walls have a significant impact on the dissipation of energy. The possibility to damp liquid sloshing using foam is promising in numerous industrial applications such as the transport of liquefied gas in tankers or for propellants in rocket engines.

Alban Sauret; Franois Boulogne; Jean Cappello; Emilie Dressaire; Howard A. Stone

2015-02-01T23:59:59.000Z

176

SEAPORT LIQUID NATURAL GAS STUDY  

SciTech Connect (OSTI)

The Seaport Liquid Natural Gas Study has attempted to evaluate the potential for using LNG in a variety of heavy-duty vehicle and equipment applications at the Ports of Los Angeles and Oakland. Specifically, this analysis has focused on the handling and transport of containerized cargo to, from and within these two facilities. In terms of containerized cargo throughput, Los Angeles and Oakland are the second and sixth busiest ports in the US, respectively, and together handle nearly 4.5 million TEUs per year. At present, the landside handling and transportation of containerized cargo is heavily dependent on diesel-powered, heavy-duty vehicles and equipment, the utilization of which contributes significantly to the overall emissions impact of port-related activities. Emissions from diesel units have been the subject of increasing scrutiny and regulatory action, particularly in California. In the past two years alone, particulate matter from diesel exhaust has been listed as a toxic air contaminant by CAM, and major lawsuits have been filed against several of California's largest supermarket chains, alleging violation of Proposition 65 statutes in connection with diesel emissions from their distribution facilities. CARE3 has also indicated that it may take further regulatory action relating to the TAC listing. In spite of these developments and the very large diesel emissions associated with port operations, there has been little AFV penetration in these applications. Nearly all port operators interviewed by CALSTART expressed an awareness of the issues surrounding diesel use; however, none appeared to be taking proactive steps to address them. Furthermore, while a less controversial issue than emissions, the dominance of diesel fuel use in heavy-duty vehicles contributes to a continued reliance on imported fuels. The increasing concern regarding diesel use, and the concurrent lack of alternative fuel use and vigorous emissions reduction activity at the Ports provide both the backdrop and the impetus for this study.

COOK,Z.

1999-02-01T23:59:59.000Z

177

Boiling of nuclear liquid in the micro-canonical ensemble  

E-Print Network [OSTI]

-dependence of the nuclear symmetry energy and the critical temperature of 1 #12;Boiling of nuclear liquid in the microBoiling of nuclear liquid in the micro-canonical ensemble K. Miyazaki E-mail: miyazakiro@rio.odn.ne.jp Abstract New calculus of the liquid-gas phase transition is developed for the boiling of nuclear liquid

178

ccsd00001732, Development behavior of liquid plasma produced by  

E-Print Network [OSTI]

water with a melted NaCl is used as a test liquid. The liquid plasma is produced by the fundamental waveccsd­00001732, version 2 ­ 7 Nov 2004 Development behavior of liquid plasma produced by YAG laser the hazardous material called the environment material. Then, the plasma produced in liquid by the laser light

179

Solvent-Resistant Photocurable "Liquid Teflon" for Microfluidic Device Fabrication  

E-Print Network [OSTI]

with photocurable perfluoropolyethers (PFPEs). PFPEs are a unique class of fluoropolymers that are liquids at room

Quake, Stephen R.

180

Liquid over-feeding air conditioning system and method  

DOE Patents [OSTI]

A refrigeration air conditioning system utilizing a liquid over-feeding operation is described. A liquid refrigerant accumulator-heat exchanger is placed in the system to provide a heat exchange relationship between hot liquid refrigerant discharged from condenser and a relatively cool mixture of liquid and vaporous refrigerant discharged from the evaporator. This heat exchange relationship substantially sub-cools the hot liquid refrigerant which undergoes little or no evaporation across the expansion device and provides a liquid over-feeding operation through the evaporator for effectively using 100 percent of evaporator for cooling purposes and for providing the aforementioned mixture of liquid and vaporous refrigerant.

Mei, Viung C. (Oak Ridge, TN); Chen, Fang C. (Knoxville, TN)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Liquid over-feeding air conditioning system and method  

DOE Patents [OSTI]

A refrigeration air conditioning system utilizing a liquid over-feeding operation is described. A liquid refrigerant accumulator-heat exchanger is placed in the system to provide a heat exchange relationship between hot liquid refrigerant discharged from condenser and a relatively cool mixture of liquid and vaporous refrigerant discharged from the evaporator. This heat exchange relationship substantially sub-cools the hot liquid refrigerant which undergoes little or no evaporation across the expansion device and provides a liquid over-feeding operation through the evaporator for effectively using 100 percent of evaporator for cooling purposes and for providing the aforementioned mixture of liquid and vaporous refrigerant. 1 figure.

Mei, V.C.; Chen, F.C.

1993-09-21T23:59:59.000Z

182

Collection of liquid from below-ground location  

DOE Patents [OSTI]

A method of retrieving liquid from a below-ground collection area by permitting gravity flow of the liquid from the collection area to a first closed container; monitoring the level of the liquid in the closed container; and after the liquid reaches a given level in the first closed container, transferring the liquid to a second closed container disposed at a location above the first closed container, via a conduit, by introducing into the first closed container a gas which is substantially chemically inert with respect to the liquid, the gas being at a pressure sufficient to propel the liquid from the first closed container to the second closed container.

Phillips, Steven J. (Kennewick, WA); Alexander, Robert G. (Kennewick, WA)

1995-01-01T23:59:59.000Z

183

Fuel gas production by microwave plasma in liquid  

SciTech Connect (OSTI)

We propose to apply plasma in liquid to replace gas-phase plasma because we expect much higher reaction rates for the chemical deposition of plasma in liquid than for chemical vapor deposition. A reactor for producing microwave plasma in a liquid could produce plasma in hydrocarbon liquids and waste oils. Generated gases consist of up to 81% hydrogen by volume. We confirmed that fuel gases such as methane and ethylene can be produced by microwave plasma in liquid.

Nomura, Shinfuku; Toyota, Hiromichi; Tawara, Michinaga; Yamashita, Hiroshi; Matsumoto, Kenya [Graduate School of Science and Engineering, Ehime University, 3 Bunkyo-cho, Matsuyama, Ehime 790-8577 (Japan); Shikoku Industry and Technology Promotion Center, 2-5 Marunouchi, Takamatsu, Kagawa 760-0033 (Japan)

2006-06-05T23:59:59.000Z

184

Rotor for processing liquids using movable capillary tubes  

DOE Patents [OSTI]

A rotor assembly for processing liquids, especially whole blood samples, is disclosed. The assembly includes apparatus for separating non-liquid components of whole blood samples from liquid components, apparatus for diluting the separated liquid component with a diluent and apparatus for transferring the diluted sample to an external apparatus for analysis. The rotor assembly employs several movable capillary tubes to handle the sample and diluents. A method for using the rotor assembly to process liquids is also described. 5 figs.

Johnson, W.F.; Burtis, C.A.; Walker, W.A.

1987-07-17T23:59:59.000Z

185

Liquid-Liquid Partitioning Methods for Bioseparations," Chapter 7 in the Handbook of  

E-Print Network [OSTI]

investigated in a book edited by Sekine and ~asegawa" entitled "Solvent Extraction Chemistry: Fundamentals The International Union of Pure and Applied Chemistry (IUPAC) recom- mends the use of liquid-liquid distribution pipette. The organic phase (solvent ~hase)is usually the top phase and the aqueous phase bottom phase

Gu, Tingyue

186

Images reveal that atmospheric particles can undergo liquid-liquid phase separations  

SciTech Connect (OSTI)

A large fraction of submicron atmospheric particles contains both organic material and inorganic salts. As the relative humidity cycles in the atmosphere, these mixed particles can undergo a range of phase transitions, possibly including liquid-liquid phase separation. If liquid-liquid phase separation occurs, the gas-particle partitioning of atmospheric semi-volatile organic compounds, the scattering and absorption of solar radiation, and the uptake of reactive gas species on atmospheric particles will be affected, with important implications for climate predictions. The actual occurrence of these types of phase transitions within individual atmospheric particles has been considered uncertain, in large part because of the absence of observations for real-world samples. Here, using optical and fluorescence microscopy, we observe the coexistence of two non-crystalline phases in particles generated from real-world samples collected on multiple days in Atlanta, Georgia, and in particles generated in the laboratory using atmospheric conditions. These results reveal that atmospheric particles can undergo liquid-liquid phase separations. Using a box model, we show that liquid-liquid phase separation can result in increased concentrations of gas-phase NO3 and N2O5 in the Atlanta region, due to decreased particle uptake of N2O5.

You, Yuan; Renbaum-Wolff, Lindsay; Carreras-Sospedra, Marc; Hanna, Sarah; Hiranuma, Naruki; Kamal, Saeid; Smith, Mackenzie L.; Zhang, Xiaolu; Weber, Rodney; Shilling, John E.; Dabdub, Donald; Martin, Scot T.; Bertram, Allan K.

2012-07-30T23:59:59.000Z

187

Quaternary liquid-liquid equilibrium of n-heptane-toluene-o-xylene-propylene carbonate  

SciTech Connect (OSTI)

Liquid-liquid equilibrium data for the system n-heptane/toluene/o-xylene/propylene carbonate were obtained at 25 OC. Experimental tie line data were measured by gas chromatographic analysis. The UNIQUAC and NRTL models were used to predict the quaternary data from the corresponding ternary data. Agreement between the predictions and the experimental data was satisfactory.

Salem, A.B.S.H.; Hamad, E.Z.; Al-Naafa, M.A. (King Fahd Univ. of Petroleum and Minerals, Dhahran (Saudi Arabia). Chemical Engineering Dept.)

1994-03-01T23:59:59.000Z

188

Liquid-liquid equilibria for ternary systems containing hydrocarbons and propylene carbonate  

SciTech Connect (OSTI)

Experimental data of liquid-liquid equillibrium at 20/sup 0/C are reported for six ternary systems containing propylene carbonate with n-hexane-benzene, n-hexane-ethylbenzene, n-heptane-toluene, n-heptane-ethylbenzene, n-octane-o-xylene, and n-octane-ethylbenzene. The data are correlated by means of NRTL and UNIQUAC models and relative parameters are given.

Annesini, M.C.; Gironi, F.; Marrelli, L.

1985-04-01T23:59:59.000Z

189

Self-Assembly of Microscale Objects at a Liquid/Liquid Interface through Lateral Capillary Forces  

E-Print Network [OSTI]

Self-Assembly of Microscale Objects at a Liquid/Liquid Interface through Lateral Capillary Forces allowed to self-assemble at the perfluorodecalin/water interface. These plates were fabricated from, the designs of hydrophobic edges necessary to generate menisci useful in self-assembly were different for 100

Prentiss, Mara

190

Continuous transitions between composite Fermi liquid and Landau Fermi liquid: A route to fractionalized Mott insulators  

E-Print Network [OSTI]

One of the most successful theories of a non-Fermi-liquid metallic state is the composite Fermi-liquid (CFL) theory of the half-filled Landau level. In this paper, we study continuous quantum phase transitions out of the ...

Barkeshli, Maissam

191

Liquid-absorption preconcentrator sampling instrument  

DOE Patents [OSTI]

A system for detecting trace concentrations of an analyte in air and includes a preconcentrator for the analyte and an analyte detector. The preconcentrator includes an elongated tubular container in which is disposed a wettable material extending substantially the entire length of the container. One end of the wettable material is continuously wetted with an analyte-sorbing liquid, which flows to the other end of the container. Sample air is flowed through the container in contact with the wetted material for trapping and preconcentrating the traces of analyte in the sorbing liquid, which is then collected at the other end of the container and discharged to the detector. The wetted material may be a wick comprising a bundle of fibers, one end of which is immersed in a reservoir of the analyte-sorbing liquid, or may be a liner disposed on the inner surface of the container, with the sorbing liquid being centrifugally dispersed onto the liner at one end thereof. The container is preferably vertically oriented so that gravity effects the liquid flow.

Zaromb, Solomon (Hinsdale, IL)

1990-01-01T23:59:59.000Z

192

Removal of arsenic compounds from petroliferous liquids  

DOE Patents [OSTI]

The present invention in one aspect comprises a process for removing arsenic from petroliferous-derived liquids by contacting said liquid with a divinylbenzene-crosslinked polystyrene polymer (i.e. PS-DVB) having catechol ligands anchored to said polymer, said contacting being at an elevated temperature. In another aspect, the invention is a process for regenerating spent catecholated polystyrene polymer by removal of the arsenic bound to it from contacting petroliferous liquid in accordance with the aspect described above which regenerating process comprises: (a) treating said spent catecholated polystyrene polymer with an aqueous solution of at least one member selected from the group consisting of carbonates and bicarbonates of ammonium, alkali metals, and alkaline earth metals, said solution having a pH between about 8 and 10, and said treating being at a temperature in the range of about 20/sup 0/ to 100/sup 0/C; (b) separating the solids and liquids from each other. In a preferred embodiment the regeneration treatment is in two steps wherein step: (a) is carried out with an aqueous alcoholic carbonate solution which includes at least one lower alkyl alcohol, and, steps (c) and (d) are added. Steps (c) and (d) comprise: (c) treating the solids with an aqueous alcoholic solution of at least one ammonium, alkali or alkaline earth metal bicarbonate at a temperature in the range of about 20 to 100/sup 0/C; and (d) separating the solids from the liquids.

Fish, R.H.

1984-04-06T23:59:59.000Z

193

Process for the production of liquid hydrocarbons  

DOE Patents [OSTI]

The present invention concerns a process for the preparation of liquid hydrocarbons which process comprises contacting synthesis gas with a slurry of solid catalyst particles and a liquid in a reactor vessel by introducing the synthesis gas at a low level into the slurry at conditions suitable for conversion of the synthesis gas into liquid hydrocarbons, the solid catalyst particles comprising a catalytic active metal selected from cobalt or iron on a porous refractory oxide carrier, preferably selected from silica, alumina, titania, zirconia or mixtures thereof, the catalyst being present in an amount between 10 and 40 vol. percent based on total slurry volume liquids and solids, and separating liquid material from the solid catalyst particles by using a filtration system comprising an asymmetric filtration medium (the selective side at the slurry side), in which filtration system the average pressure differential over the filtration medium is at least 0.1 bar, in which process the particle size distribution is such that at least a certain amount of the catalyst particles is smaller than the average pore size of the selective layer of the filtration medium. The invention also comprises an apparatus to carry out the process described above.

Bhatt, Bharat Lajjaram; Engel, Dirk Coenraad; Heydorn, Edward Clyde; Senden, Matthijis Maria

2006-06-27T23:59:59.000Z

194

Charge transfer reactions in nematic liquid crystals  

SciTech Connect (OSTI)

Ultrafast transient absorption studies of intramolecular photoinduced charge separation and thermal charge recombination were carried out on a molecule consisting of a 4-(N-pyrrolidino)naphthalene-1,8-imide donor (PNI) covalently attached to a pyromellitimide acceptor (PI) dissolved in the liquid crystal 4{prime}-(n-pentyl)-4-cyanobiphenyl (5CB). The temperature dependencies of the charge separation and recombination rates were obtained at temperatures above the nematic-isotropic phase transition of 5CB, where ordered microdomains exist and scattering of visible light by these domains is absent. The authors show that excited state charge separation is dominated by molecular reorientation of 5CB perpendicular to the director within the liquid crystal microdomains. They also show that charge recombination is adiabatic and is controlled by the comparatively slow collective reorientation of the liquid crystal microdomains relative to the orientation of PNI{sup +}-PI{sup {minus}}. They also report the results of time resolved electron paramagnetic resonance (TREPR) studies of photoinduced charge separation in a series of supramolecular compounds dissolved in oriented liquid crystal solvents. These studies permit the determination of the radical pair energy levels as the solvent reorganization energy increases from the low temperature crystalline phase, through the soft glass phase, to the nematic phase of the liquid crystal.

Wiederrecht, G.P. [Argonne National Lab., IL (United States). Chemistry Div.; Wasielewski, M.R. [Argonne National Lab., IL (United States). Chemistry Div.; [Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry; Galili, T.; Levanon, H. [Hebrew Univ. of Jerusalem (Israel). Dept. of Physical Chemistry

1998-07-01T23:59:59.000Z

195

Double-duct liquid metal magnetohydrodynamic engine  

DOE Patents [OSTI]

An internal combustion, liquid metal (LM) magnetohydrodynamic (MHD) engine and an alternating current (AC) magnetohydrodynamic generator, are used in combination to provide useful AC electric energy output. The engine design has four pistons and a double duct configuration, with each duct containing sodium potassium liquid metal confined between free pistons located at either end of the duct. The liquid metal is forced to flow back and forth in the duct by the movement of the pistons, which are alternatively driven by an internal combustion process. In the MHD generator, the two LM-MHD ducts pass in close proximity through a Hartmann duct with output transformer. AC power is produced by operating the engine with the liquid metal in the two generator ducts always flowing in counter directions. The amount of liquid metal maintained in the ducts may be varied. This provides a variable stroke length for the pistons. The engine/generator provides variable AC power at variable frequencies that correspond to the power demands of the vehicular propulsion. Also the engine should maintain nearly constant efficiency throughout the range of power usage. Automobiles and trucks could be powered by the invention, with no transmission or power converter devices being required.

Haaland, Carsten M. (Oak Ridge, TN)

1997-01-01T23:59:59.000Z

196

Double-duct liquid metal magnetohydrodynamic engine  

DOE Patents [OSTI]

An internal combustion, liquid metal (LM) magnetohydrodynamic (MHD) engine and an alternating current (AC) magnetohydrodynamic generator, are used in combination to provide useful AC electric energy output. The engine design has-four pistons and a double duct configuration, with each duct containing sodium potassium liquid metal confined between free pistons located at either end of the duct. The liquid metal is forced to flow back and forth in the duct by the movement of the pistons, which are alternatively driven by an internal combustion process. In the MHD generator, the two LM-MHD ducts pass in close proximity through a Hartmann duct with output transformer. AC power is produced by operating the engine with the liquid metal in the two generator ducts always flowing in counter directions. The amount of liquid metal maintained in the ducts may be varied. This provides a variable stroke length for the pistons. The engine/generator provides variable AC power at variable frequencies that correspond to the power demands of the vehicular propulsion. Also the engine should maintain nearly constant efficiency throughout the range of power usage. Automobiles and trucks could be powered by the invention, with no transmission or power converter devices being required.

Haaland, Carsten M. (Oak Ridge, TN)

1995-01-01T23:59:59.000Z

197

High throughput liquid absorption preconcentrator sampling instrument  

DOE Patents [OSTI]

A system for detecting trace concentrations of an analyte in air includes a preconcentrator for the analyte and an analyte detector. The preconcentrator includes an elongated tubular container comprising a wettable material. The wettable material is continuously wetted with an analyte-sorbing liquid which flows from one part of the container to a lower end. Sampled air flows through the container in contact with the wetted material with a swirling motion which results in efficient transfer of analyte vapors or aerosol particles to the sorbing liquid and preconcentration of traces of analyte in the liquid. The preconcentrated traces of analyte may be either detected within the container or removed therefrom for injection into a separate detection means or for subsequent analysis. 12 figs.

Zaromb, S.; Bozen, R.M.

1992-12-22T23:59:59.000Z

198

DOE studies on coal-to-liquids  

SciTech Connect (OSTI)

The US DOE National Energy Technology Laboratory has issued reports that examine the feasibility of coal-to-liquids (CTL) facilities, both general and site specific, which are available at www.netl.gov/energy-analyses/ref-shelf.html. The US Department of Defence has been investigating use of Fischer-Tropsch fuels. Congress is considering various CTL proposals while the private sector is building pilot plants and performing feasibility studies for proposed plants. The article includes a table listing 14 coal-to-liquids plants under consideration. The private sector has formed the coal-to-liquids coalition (www.futurecoalfuels.org). The article mentions other CTL projects in South Africa, China, Indonesia, the Philippines and New Zealand. 1 tab.

NONE

2007-07-01T23:59:59.000Z

199

Liquid injection plasma deposition method and apparatus  

DOE Patents [OSTI]

A liquid injection plasma torch deposition apparatus for depositing material onto a surface of a substrate may comprise a plasma torch for producing a jet of plasma from an outlet nozzle. A plasma confinement tube having an inlet end and an outlet end and a central bore therethrough is aligned with the outlet nozzle of the plasma torch so that the plasma jet is directed into the inlet end of the plasma confinement tube and emerges from the outlet end of the plasma confinement tube. The plasma confinement tube also includes an injection port transverse to the central bore. A liquid injection device connected to the injection port of the plasma confinement tube injects a liquid reactant mixture containing the material to be deposited onto the surface of the substrate through the injection port and into the central bore of the plasma confinement tube.

Kong, Peter C. (Idaho Falls, ID); Watkins, Arthur D. (Idaho Falls, ID)

1999-01-01T23:59:59.000Z

200

Liquid Water Oceans in Ice Giants  

E-Print Network [OSTI]

Aptly named, ice giants such as Uranus and Neptune contain significant amounts of water. While this water cannot be present near the cloud tops, it must be abundant in the deep interior. We investigate the likelihood of a liquid water ocean existing in the hydrogen-rich region between the cloud tops and deep interior. Starting from an assumed temperature at a given upper tropospheric pressure (the photosphere), we follow a moist adiabat downward. The mixing ratio of water to hydrogen in the gas phase is small in the photosphere and increases with depth. The mixing ratio in the condensed phase is near unity in the photosphere and decreases with depth; this gives two possible outcomes. If at some pressure level the mixing ratio of water in the gas phase is equal to that in the deep interior, then that level is the cloud base. Alternately, if the mixing ratio of water in the condensed phase reaches that in the deep interior, then the surface of a liquid ocean will occur. We find that Neptune is both too warm (photospheric temperature too high) and too dry (mixing ratio of water in the deep interior too low) for liquid oceans to exist at present. To have a liquid ocean, Neptune's deep interior water to gas ratio would have to be higher than current models allow, and the density at 19 kbar would have to be ~ 0.8 g/cm^3. Such a high density is inconsistent with gravitational data obtained during the Voyager flyby. As Neptune cools, the probability of a liquid ocean increases. Extrasolar "hot Neptunes," which presumably migrate inward toward their parent stars, cannot harbor liquid water oceans unless they have lost almost all of the hydrogen and helium from their deep interiors.

Sloane J. Wiktorowicz; Andrew P. Ingersoll

2006-09-26T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

ICARUS and Status of Liquid Argon Technology  

E-Print Network [OSTI]

ICARUS is the largest liquid argon TPC detector ever built (~600 ton LAr mass). It operates underground at the LNGS laboratory in Gran Sasso. It has been smoothly running since summer 2010, collecting data with the CNGS beam and with cosmics. Liquid argon TPCs are really "electronic bubble chamber" providing a completely uniform imaging and calorimetry with unprecedented accuracy on massive volumes. ICARUS is internationally considered as a milestone towards the realization of the next generation of massive detectors (~tens of ktons) for neutrino and rare event physics. Results will be presented on the data collected during 2010 with the detector at LNGS.

Dorota Stefan

2011-10-07T23:59:59.000Z

202

Liquid additives for particulate emissions control  

DOE Patents [OSTI]

The present invention discloses a process for removing undesired particles from a gas stream including the steps of contacting a composition containing an adhesive with the gas stream; collecting the undesired particles and adhesive on a collection surface to form an aggregate comprising the adhesive and undesired particles on the collection surface; and removing the agglomerate from the collection zone. The composition may then be atomized and injected into the gas stream. The composition may include a liquid that vaporizes in the gas stream. After the liquid vaporizes, adhesive particles are entrained in the gas stream. The process may be applied to electrostatic precipitators and filtration systems to improve undesired particle collection efficiency.

Durham, Michael Dean (Castle Rock, CO); Schlager, Richard John (Aurora, CO); Ebner, Timothy George (Westminster, CO); Stewart, Robin Michele (Arvada, CO); Hyatt, David E. (Denver, CO); Bustard, Cynthia Jean (Littleton, CO); Sjostrom, Sharon (Denver, CO)

1999-01-01T23:59:59.000Z

203

A priori estimates for relativistic liquid bodies  

E-Print Network [OSTI]

We demonstrate that a sufficiently smooth solution of the relativistic Euler equations that represents a dynamical compact liquid body, when expressed in Lagrangian coordinates, determines a solution to a system of non-linear wave equations with acoustic boundary conditions. Using this wave formulation, we prove that these solutions satisfy energy estimates without loss of derivatives. Importantly, our wave formulation does not require the liquid to be irrotational, and the energy estimates do not rely on divergence and curl type estimates employed in previous works.

Oliynyk, Todd A

2015-01-01T23:59:59.000Z

204

Anisotropic wave propagation in nematic liquid crystals  

E-Print Network [OSTI]

Despite the fact that quantitative experimental data have been available for more than forty years now, nematoacoustics still poses intriguing theoretical and experimental problems. In this paper, we prove that the main observed features of acoustic wave propagation through a nematic liquid crystal cell -- namely, the anisotropy of sound velocity and its frequency dependence -- may be plausibly explained by a first-gradient continuum theory characterized by a hyperelastic anisotropic response from an evolving relaxed configuration. We compare and contrast our proposal with a competing theory where the liquid crystal is modeled as an isotropically compressible, anisotropic second-gradient fluid.

Paolo Biscari; Antonio DiCarlo; Stefano S. Turzi

2014-05-10T23:59:59.000Z

205

Liquid Propane Injection Applications | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001 LetterLight-Duty11.2.13 Liquid FuelsLiquid propane

206

A method of measuring a molten metal liquid pool volume  

DOE Patents [OSTI]

A method of measuring a molten metal liquid pool volume and in particular molten titanium liquid pools, including the steps of (a) generating an ultrasonic wave at the surface of the molten metal liquid pool, (b) shining a light on the surface of a molten metal liquid pool, (c) detecting a change in the frequency of light, (d) detecting an ultrasonic wave echo at the surface of the molten metal liquid pool, and (e) computing the volume of the molten metal liquid. 3 figs.

Garcia, G.V.; Carlson, N.M., Donaldson, A.D.

1990-12-12T23:59:59.000Z

207

Liquid-liquid extraction as the means of refining cottonseed oil  

E-Print Network [OSTI]

LIBRARY A 4 AI CvLLEGE OF TEXAS LIOVID-LIQUID EXTRACTION AS THE MEANS OI REFINING CCTTONSEFZ OIL A Thesis By 1'RVUBHAI CHIINIBHAI PATEL a 0 U z A R 0 Submitted to the Graduate School of the Agricultural and Mechanical College of Texas... in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Auuust 1996 Major Subject Chemical ineeri LIQUID-LIQUID EXTRACTION AS THE MEANS OF REFINING COTTONSEED OIL A Thesis By MANUBHAI CHUNIBHAI PATEL Approved as to style...

Patel, Manubhai Chunibhai

1956-01-01T23:59:59.000Z

208

1,2,3-triazolium ionic liquids  

DOE Patents [OSTI]

The present invention relates to compositions of matter that are ionic liquids, the compositions comprising substituted 1,2,3-triazolium cations combined with any anion. Compositions of the invention should be useful in the separation of gases and, perhaps, as catalysts for many reactions.

Luebke, David; Nulwala, Hunaid; Tang, Chau

2014-12-09T23:59:59.000Z

209

Liquid uranium alloy-helium fission reactor  

DOE Patents [OSTI]

This invention teaches a nuclear fission reactor having a core vessel and at least one tandem heat exchanger vessel coupled therewith across upper and lower passages to define a closed flow loop. Nuclear fuel such as a uranium alloy in its liquid phase fills these vessels and flow passages. Solid control elements in the reactor core vessel are adapted to be adjusted relative to one another to control fission reaction of the liquid fuel therein. Moderator elements in the other vessel and flow passages preclude fission reaction therein. An inert gas such as helium is bubbled upwardly through the heat exchanger vessel operable to move the liquid fuel upwardly therein and unidirectionally around the closed loop and downwardly through the core vessel. This helium gas is further directed to heat conversion means outside of the reactor vessels to utilize the heat from the fission reaction to generate useful output. The nuclear fuel operates in the 1200.degree.-1800.degree. C. range, and even higher to 2500.degree. C., limited only by the thermal effectiveness of the structural materials, increasing the efficiency of power generation from the normal 30-35% with 300.degree.-500.degree. C. upper limit temperature to 50-65%. Irradiation of the circulating liquid fuel, as contrasted to only localized irradiation of a solid fuel, provides improved fuel utilization.

Minkov, Vladimir (Skokie, IL)

1986-01-01T23:59:59.000Z

210

Improved liquid-film electron stripper  

DOE Patents [OSTI]

An improved liquid-film electron stripper particularly for high intensity heavy ion beams which produces constant regenerated, stable, free-standing liquid films having an adjustable thickness between 0.3 to 0.05 microns. The improved electron stripper is basically composed of at least one high speed, rotating disc with a very sharp, precision-like, ground edge on one side of the disc's periphery and with highly polished, flat, radial surface adjacent the sharp edge. A fine stream of liquid, such as oil, impinges at a 90/sup 0/ angle adjacent the disc's sharp outer edge. Film terminators, located at a selected distance from the disc perimeter are positioned approximately perpendicular to the film. The terminators support, shape, and stretch the film and are arranged to assist in the prevention of liquid droplet formation by directing the collected film to a reservoir below without breaking or interfering with the film. One embodiment utilizes two rotating discs and associated terminators, with the discs rotating so as to form films in opposite directions, and with the second disc being located down beam-line relative to the first disc.

Gavin, B.F.

1984-11-01T23:59:59.000Z

211

Liquid Fuels from Lignins: Annual Report  

SciTech Connect (OSTI)

This task was initiated to assess the conversion of lignins into liquid fuels, primarily of lignins relevant to biomass-to-ethanol conversion processes. The task was composed of a literature review of this area and an experimental part to obtain pertinent data on the conversion of lignins germane to biomass-to-ethanol conversion processes.

Chum, H. L.; Johnson, D. K.

1986-01-01T23:59:59.000Z

212

UV STABILITY OF HIGH BIREFIRNGENCE LIQUID CRYSTALS  

E-Print Network [OSTI]

nm, the major UV light used for curing sealant. The material degradation is believed to originate experimental results indicate that the UV degradation not only depends on the absorption wavelength but alsoUV STABILITY OF HIGH BIREFIRNGENCE LIQUID CRYSTALS Pao-Tai Lin and Shin-Tson Wu School of Optics

Wu, Shin-Tson

213

Local Energy Landscape in a Simple Liquid  

E-Print Network [OSTI]

It is difficult to relate the properties of liquids and glasses directly to their structure because of complexity in the structure which defies precise definition. The potential energy landscape (PEL) approach is a very insightful way to conceptualize the structure-property relationship in liquids and glasses, particularly on the effect of temperature and history. However, because of the highly multi-dimensional nature of the PEL it is hard to determine, or even visualize, the actual details of the energy landscape. In this article we introduce a modified concept of the local energy landscape (LEL) which is limited in phase space, and demonstrate its usefulness using molecular dynamics simulation on a simple liquid at high temperatures. The local energy landscape is given as a function of the local coordination number, the number of the nearest neighbor atoms. The excitations in the LEL corresponds to the so-called beta-relaxation process. The LEL offers a simple but useful starting point to discuss complex phenomena in liquids and glasses.

Takuya Iwashita; Takeshi Egami

2014-10-31T23:59:59.000Z

214

Organizing Carbon Nanotubes with Liquid Crystals  

E-Print Network [OSTI]

Organizing Carbon Nanotubes with Liquid Crystals Michael D. Lynch and David L. Patrick* Department, 2002; Revised Manuscript Received September 13, 2002 ABSTRACT Single- and multiwalled carbon nanotubes- and multiwalled carbon nanotubes (SWCNT and MWCNT) are of particular interest because these materials

Patrick, David L.

215

Laser Micromachining: Advantages of Liquid Environments  

E-Print Network [OSTI]

Laser Micromachining: Advantages of Liquid Environments Marc J. Palmeri Princeton University Arnold Lab #12;Outline · Motivation ­ Applications of laser micromachining ­ Problems with laser micromachining · How do lasers work? · What is laser micromachining? · Micromachining assembly · Methods

Petta, Jason

216

Natural gas liquids remain strong petrochemical feedstock  

SciTech Connect (OSTI)

The supply of petrochemical feedstocks in the USA are discussed. The US petrochemical network starts with three main sources, i.e., olefins, aromatics, and natural gas. Petrochemical technology has been pushed to lower costs and improve yields in the face of a determined market drive from new petrochemical producing regions with vast supplies of low-cost gas liquids.

Greek, B.F.

1984-03-12T23:59:59.000Z

217

Supporting Information Liquid Crystalline Peptide Nanowires**  

E-Print Network [OSTI]

1 Supporting Information Liquid Crystalline Peptide Nanowires** Tae Hee Han, Jangbae Kim, Ji Sun Park, Chan Beum Park, Hyotcherl Ihee,* and Sang Ouk Kim* #12;2 Figure S1. Size distribution of as orientation effect was also considered by using the March-Dollase function. The global isotropic temperature

Ihee, Hyotcherl

218

Extremely correlated quantum liquids B. Sriram Shastry  

E-Print Network [OSTI]

Extremely correlated quantum liquids B. Sriram Shastry Physics Department, University of California; published 20 January 2010 Extreme correlations arise as the limit of strong correlations, when the local-J model, embodying such extreme correlations. We formulate the picture of an extremely correlated electron

California at Santa Cruz, University of

219

Engineering-Scale Liquid Cadmium Cathode Experiments  

SciTech Connect (OSTI)

Recovery of transuranic actinides (TRU) using electrorefining is a process being investigated as part of the Department of Energy (DOE) Advanced Fuel Cycle Initiative (AFCI). TRU recovery via electrorefining onto a solid cathode is very difficult as the thermodynamic properties of transuranics are not favourable for them to remain in the metal phase while significant quantities of uranium trichloride exist in the electrolyte. Theoretically, the concentration of transuranics in the electrolyte must be approximately 106 greater than the uranium concentration in the electrolyte to produce a transuranic deposit on a solid cathode. Using liquid cadmium as a cathode contained within a LiCl-KCl eutectic salt, the co-deposition of uranium and transuranics is feasible because the activity of the transuranics in liquid cadmium is very small. Depositing transuranics and uranium in a liquid cadmium cathode (LCC) theoretically requires the concentration of transuranics to be two to three times the uranium concentration in the electrolyte. Three LCC experiments were performed in an Engineering scale elecdtrorefiner, which is located in the argon hot cell of the Fuel Conditioning Facility at the Materials and Fuels Complex on the Idaho National Laboratory. Figure 1 contains photographs of the LCC assembly in the hot cell prior to the experiment and a cadmium ingot produced after the first LCC test. Figure 1. Liquid Cadmium Cathode (left) and Cadmium Ingot (right) The primary goal of the engineering-scale liquid cadmium cathode experiments was to electrochemically collect kilogram quantities of uranium and plutonium via a LCC. The secondary goal was to examine fission product contaminations in the materials collected by the LCC. Each LCC experiment used chopped spent nuclear fuel from the blanket region of the Experimental Breeder Reactor II loaded into steel baskets as the anode with the LCC containing 26 kg of cadmium metal. In each experiment, between one and two kilograms of heavy metal was collected in the LCC after passing an integrated current over 500 amp hours. Analysis of samples from the liquid cadmium cathode ingots showed detectable amounts of transuranics and rare-earth elements. Acknowledgements K. B. Davies and D. M. Pace for the mechanical and electrical engineering needed to prepare the equipment for the engineering-scale liquid cadmium cathode experiments.

D Vaden; B. R. Westphal; S. X. Li; T. A. Johnson; K. B. Davies; D. M. Pace

2006-08-01T23:59:59.000Z

220

Modeling the operating voltage of liquid metal battery cells  

E-Print Network [OSTI]

A one-dimensional, integrative model of the voltage during liquid metal battery operation has been developed to enhance the understanding of performance at the cell level. Two liquid metal batteries were studied: Mg-Sb for ...

Newhouse, Jocelyn Marie

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Liquid Nitrogen Ice Cream (1st Grade) Lesson Plan  

E-Print Network [OSTI]

substance. Materials: 5 or more Liters of liquid nitrogen (gloves, goggles, and lab coat recommended the liquid nitrogen and safety gear you wear have fun with it!) 4. Mix heavy cream, half & half, and sugar

222

Performance Characteristics of Coal-to-Liquids (CTL) Diesel in...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Characteristics of Coal-to-Liquids (CTL) Diesel in a 50-State Emissions Compliant Passenger Car Performance Characteristics of Coal-to-Liquids (CTL) Diesel in a 50-State Emissions...

223

Process to upgrade coal liquids by extraction prior to hydrodenitrogenation  

DOE Patents [OSTI]

Oxygen compounds are removed, e.g., by extraction, from a coal liquid prior to its hydrogenation. As a result, compared to hydrogenation of such a non-treated coal liquid, the rate of nitrogen removal is increased.

Schneider, Abraham (Overbrook Hills, PA); Hollstein, Elmer J. (Wilmington, DE); Janoski, Edward J. (Havertown, PA); Scheibel, Edward G. (Media, PA)

1982-01-01T23:59:59.000Z

224

System for removing liquid waste from a tank  

DOE Patents [OSTI]

A tank especially suited for nuclear applications is disclosed. The tank comprises a tank shell for protectively surrounding the liquid contained therein; an inlet positioned on the tank for passing a liquid into the tank; a sump positioned in an interior portion of the tank for forming a reservoir of the liquid; a sloped incline for resting the tank thereon and for creating a natural flow of the liquid toward the sump; a pump disposed adjacent the tank for pumping the liquid; and a pipe attached to the pump and extending into the sump for passing the liquid therethrough. The pump pumps the liquid in the sump through the pipe and into the pump for discharging the liquid out of the tank.

Meneely, Timothy K. (Penn Hills, PA); Sherbine, Catherine A. (N. Versailles Township, Allegheny County, PA)

1994-01-01T23:59:59.000Z

225

Systems and methods for monitoring a solid-liquid interface  

DOE Patents [OSTI]

Systems and methods are provided for monitoring a solid-liquid interface during a casting process. The systems and methods enable determination of the location of a solid-liquid interface during the casting process.

Stoddard, Nathan G; Lewis, Monte A.; Clark, Roger F

2013-06-11T23:59:59.000Z

226

Sandia National Laboratories: "Bionic" Liquids from Lignin: Joint...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy and ClimateECEnergyRenewable EnergyBiofuels"Bionic" Liquids from Lignin: Joint BioEnergy Institute Results Pave the Way for Closed-Loop Biofuel Refineries "Bionic" Liquids...

227

System for removing liquid waste from a tank  

DOE Patents [OSTI]

A tank especially suited for nuclear applications is disclosed. The tank comprises a tank shell for protectively surrounding the liquid contained therein; an inlet positioned on the tank for passing a liquid into the tank; a sump positioned in an interior portion of the tank for forming a reservoir of the liquid; a sloped incline for resting the tank thereon and for creating a natural flow of the liquid toward the sump; a pump disposed adjacent the tank for pumping the liquid; and a pipe attached to the pump and extending into the sump for passing the liquid there through. The pump pumps the liquid in the sump through the pipe and into the pump for discharging the liquid out of the tank. 2 figures.

Meneely, T.K.; Sherbine, C.A.

1994-04-26T23:59:59.000Z

228

Dependence of solid-liquid interface free energy on liquid structure  

SciTech Connect (OSTI)

The Turnbull relation is widely believed to enable prediction of solidliquid interface (SLI) free energies from measurements of the latent heat and the solid density. Ewing proposed an additional contribution to the SLI free energy to account for variations in liquid structure near the interface. In the present study, molecular dynamics (MD) simulations were performed to investigate whether SLI free energy depends on liquid structure. Analysis of the MD simulation data for 11 fcc metals demonstrated that the Turnbull relation is only a rough approximation for highly ordered liquids, whereas much better agreement is observed with Ewings theory. A modification to Ewings relation is proposed in this study that was found to provide excellent agreement with MD simulation data.

Wilson, S R [Ames Laboratory; Mendelev, M I [Ames Laboratory

2014-09-01T23:59:59.000Z

229

Laser capillary spectrophotometric acquisition of bivariate drop size and concentration data for liquid-liquid dispersion  

DOE Patents [OSTI]

A laser capillary spectrophotometric technique measures real time or near real time bivariate drop size and concentration distribution for a reactive liquid-liquid dispersion system. The dispersion is drawn into a precision-bore glass capillary and an appropriate light source is used to distinguish the aqueous phase from slugs of the organic phase at two points along the capillary whose separation is precisely known. The suction velocity is measured, as is the length of each slug from which the drop free diameter is calculated. For each drop, the absorptivity at a given wavelength is related to the molar concentration of a solute of interest, and the concentration of given drops of the organic phase is derived from pulse heights of the detected light. This technique permits on-line monitoring and control of liquid-liquid dispersion processes. 17 figures.

Tavlarides, L.L.; Bae, J.H.

1991-12-24T23:59:59.000Z

230

Study of liquid retention in fixed-bed reactors with upward flow of gas and liquid  

SciTech Connect (OSTI)

A literature survey of the measurement techniques for the determination of liquid retention in cocurrent upward gas and liquid flow in fixed-bed reactors is presented. A number of these techniques were used in this work in columns of different diameters (Dc = 0.05 m, 0.10 m, and 0.15 m). Porous alumina particles of two different diameters (dp = 0.002 m and 0.0028 m) with both nonfoaming (water, cyclohexane, heptane, and propanol) and foaming liquids (kerosene, LCO, and diesel fuel) have been investigated. The gas used was either air or N[sub 2]. The methods investigated include volumetry, gravimetry, gammametry, and determination of residence-time distribution by tracer technique. A simple correlation for the prediction of total gas and liquid retention for bubble and pulsed flow is proposed and verified.

Yang, X.L.; Euzen, J.P. (Inst. Francais du Petrole, Vernaison (France)); Wild, G. (Lab. des Sciences du Genie Chimique, Nancy (France))

1993-01-01T23:59:59.000Z

231

MagViz Bottled Liquid Scanner at Albuquerque International Sunport  

ScienceCinema (OSTI)

The next-generation bottled liquid scanner, MagViz BLS, is demonstrated at the Albuquerque International Sunport, New Mexico

Surko, Stephen; Dennis, Steve; Espy, Michelle

2014-08-12T23:59:59.000Z

232

Metal-air low temperature ionic liquid cell  

DOE Patents [OSTI]

The present application relates to an electrochemical metal-air cell in which a low temperature ionic liquid is used.

Friesen, Cody A; Buttry, Daniel A

2014-11-25T23:59:59.000Z

233

Plasmas in Multiphase Media: Bubble Enhanced Discharges in Liquids and Plasma/Liquid Phase Boundaries  

SciTech Connect (OSTI)

In this research project, the interaction of atmospheric pressure plasmas with multi-phase media was computationally investigated. Multi-phase media includes liquids, particles, complex materials and porous surfaces. Although this investigation addressed fundamental plasma transport and chemical processes, the outcomes directly and beneficially affected applications including biotechnology, medicine and environmental remediation (e.g., water purification). During this project, we made advances in our understanding of the interaction of atmospheric pressure plasmas in the form of dielectric barrier discharges and plasma jets with organic materials and liquids. We also made advances in our ability to use computer modeling to represent these complex processes. We determined the method that atmospheric pressure plasmas flow along solid and liquid surfaces, and through endoscopic like tubes, deliver optical and high energy ion activation energy to organic and liquid surfaces, and produce reactivity in thin liquid layers, as might cover a wound. We determined the mechanisms whereby plasmas can deliver activation energy to the inside of liquids by sustaining plasmas in bubbles. These findings are important to the advancement of new technology areas such as plasma medicine

Kushner, Mark Jay [University of Michigan] [University of Michigan

2014-07-10T23:59:59.000Z

234

Liquid Lithium Limiter Effects on Tokamak Plasmas and Plasma-Liquid Surface Interactions  

SciTech Connect (OSTI)

We present results from the first experiments with a large area liquid lithium limiter in a magnetic fusion device, and its effect on improving plasma performance by reducing particle recycling. Using large area liquid metal surfaces in any major fusion device is unlikely before a test on a smaller scale. This has motivated its demonstration in the CDX-U spherical torus with a unique, fully toroidal lithium limiter. The highest current discharges were obtained with a liquid lithium limiter. There was a reduction in recycling, as indicated by a significant decrease in the deuterium-alpha emission and oxygen radiation. How these results might extrapolate to reactors is suggested in recycling/retention experiments with liquid lithium surfaces under high-flux deuterium and helium plasma bombardment in PISCES-B. Data on deuterium atoms retained in liquid lithium indicate retention of all incident ions until full volumetric conversion to lithium deuteride. The PISCES-B results also show a material loss mechanism that lowers the maximum operating temperature compared to that for the liquid surface equilibrium vapor pressure. This may restrict the lithium temperature in reactors.

R. Kaita; R. Majeski; R. Doerner; G. Antar; M. Baldwin; R. Conn; P. Efthimion; M. Finkenthal; D. Hoffman; B. Jones; S. Krashenninikov; H. Kugel; S. Luckhardt; R. Maingi; J. Menard; T. Munsat; D. Stutman; G. Taylor; J. Timberlake; V. Soukhanovskii; D. Whyte; R. Woolley; L. Zakharov

2002-10-15T23:59:59.000Z

235

Liquid crystals and Q-tensors The free energy  

E-Print Network [OSTI]

Liquid crystals and Q-tensors The free energy A temperature-dependent model Mathematical results #12;Liquid crystals and Q-tensors The free energy A temperature-dependent model Mathematical results, Non-isothermal nematic liquid crystals flows with the Ball-Majumdar free energy, Ann. Mat. Pura Appl

Segatti, Antonio

236

(Electron transfer rates at semiconductor/liquid interfaces)  

SciTech Connect (OSTI)

Work has focused on several aspects of the fundamental chemistry and physics semiconductor/liquid junction behavior. These projects have been directed primarily towards GaAs/liquid contacts, because GaAs/liquid systems provide high energy conversion efficiencies and offer an opportunity to gain mechanistic understanding of the factors that are important to control in an efficient photoelectrochemical energy conversion system.

Lewis, N.S.

1992-01-01T23:59:59.000Z

237

[Electron transfer rates at semiconductor/liquid interfaces]. Progress report  

SciTech Connect (OSTI)

Work has focused on several aspects of the fundamental chemistry and physics semiconductor/liquid junction behavior. These projects have been directed primarily towards GaAs/liquid contacts, because GaAs/liquid systems provide high energy conversion efficiencies and offer an opportunity to gain mechanistic understanding of the factors that are important to control in an efficient photoelectrochemical energy conversion system.

Lewis, N.S.

1992-08-01T23:59:59.000Z

238

RF cavity using liquid dielectric for tuning and cooling  

DOE Patents [OSTI]

A system for accelerating particles includes an RF cavity that contains a ferrite core and a liquid dielectric. Characteristics of the ferrite core and the liquid dielectric, among other factors, determine the resonant frequency of the RF cavity. The liquid dielectric is circulated to cool the ferrite core during the operation of the system.

Popovic, Milorad (Warrenville, IL); Johnson, Rolland P. (Newport News, VA)

2012-04-17T23:59:59.000Z

239

Energy Landscape Diversity and Supercooled Liquid Properties Frank H. Stillingera  

E-Print Network [OSTI]

typically exhibit little difference between liquid and crystal heat capacities Cp , and tend to have of the latter have liquid heat capacities that are significantly larger than the corresponding crystal values of the so-called "Kauzmann paradox". 5 The supercooled-liquid versus crystal heat capacity discrepancy, when

Stillinger, Frank

240

The physics of liquid water Bernard Cabane1  

E-Print Network [OSTI]

with extraordinary properties: it has unusually high melting and boiling temperatures, a huge heat capacity, oneThe physics of liquid water Bernard Cabane1 , Rodolphe Vuilleumier2 1 PMMH, ESPCI, 10 rue Vauquelin, France Abstract Liquid water is a liquid with extraordinary properties: it has a very high cohesion

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

NATURAL CONVECTION OF SUBCOOLED LIQUID NITROGEN IN A VERTICAL CAVITY  

E-Print Network [OSTI]

temperature superconductor) power devices, such as HTS transformers, fault current limiters, and terminals power transformer cooled by natural convection of subcooled liquid nitrogen. A liquid nitrogen bath of subcooled liquid nitrogen system for an HTS transformer, operating at around 65 K. This system consists

Chang, Ho-Myung

242

Electrohydrodynamically driven large-area liquid ion sources  

DOE Patents [OSTI]

A large-area liquid ion source comprises means for generating, over a large area of the surface of a liquid, an electric field of a strength sufficient to induce emission of ions from a large area of said liquid. Large areas in this context are those distinct from emitting areas in unidimensional emitters.

Pregenzer, Arian L. (Corrales, NM)

1988-01-01T23:59:59.000Z

243

Microfluidic Facility, Harvard Medical School LIQUID NITROGEN TANK HANDLING  

E-Print Network [OSTI]

Microfluidic Facility, Harvard Medical School LIQUID NITROGEN TANK HANDLING HMS microfluidics/microfabrication facility has one high pressure liquid nitrogen tank which supplies the nitrogen for some equipment normal operation. In case the liquid nitrogen tank is malfunctioning and requires to be shut down or replaced make

Paulsson, Johan

244

Cost of meeting geothermal liquid effluent disposal regulations  

SciTech Connect (OSTI)

Background information is presented on the characteristics of liquid wastes and the available disposal options. Regulations that may directly or indirectly influence liquid waste disposal are reviewed. An assessment of the available wastewater-treatment systems is provided. A case study of expected liquid-waste-treatment and disposal costs is summarized. (MHR)

Wells, K.D.; Currie, J.W.; Price, B.A.; Rogers, E.A.

1981-06-01T23:59:59.000Z

245

Modeling multiphase flow for high viscosity liquids: a study of vertical/inclined zero net liquid flow  

E-Print Network [OSTI]

This experimental study investigates the effects of inclination angle and fluid viscosity on zero net liquid flow (ZNLF). Predicting liquid holdup under ZNLF conditions is necessary in several types of petroleum industry operations. These include...

Rodriguez, Jose Ramon

2001-01-01T23:59:59.000Z

246

A Microfluidic System for the Continuous Recycling of Unmodified Homogeneous Palladium Catalysts through Liquid/Liquid Phase Separation  

E-Print Network [OSTI]

A prototype microflow system for the continuous recycling of homogeneous catalysts through liquid/liquid phase separation was developed and its effectiveness demonstrated in a challenging palladium-catalyzed hydroxylation ...

Li, Pengfei

247

Sum frequency generation study on the orientation of room-temperature ionic liquid at the grapheneionic liquid interface  

E-Print Network [OSTI]

such as dye-sensitized solar cells and super capacitors, room-temperature ionic liquids are considered

Bao, Jiming

248

Experimental partitioning of uranium between liquid iron sulfide and liquid silicate: Implications for radioactivity in the Earth's core  

E-Print Network [OSTI]

Experimental partitioning of uranium between liquid iron sulfide and liquid silicate: Implications Measurable uranium (U) is found in metal sulfide liquids in equilibrium with molten silicate at conditions shows that K is depleted in the Earth by $50%, while U and Th are slightly enriched (Palme and O

Minarik, William

249

Journal of Electrostatics 51}52 (2001) 290}299 Liquid dielectrophoresis on the microscale  

E-Print Network [OSTI]

. The phenomenol- ogy of liquid DEP may be simply stated: dielectric liquid in a non-uniform electric "eld tends

Jones, Thomas B.

250

Method and apparatus for destroying organic contaminants in aqueous liquids  

DOE Patents [OSTI]

A method and apparatus for destroying organic contaminants, such as trichloroethylene, in aqueous liquids, such as groundwater, utilizing steam stripping integrated with biodegradation. The contaminated aqueous liquid is fed into a steam stripper causing the volatilization of essentially all of the organic contaminants and a portion of the aqueous liquid. The majority of the aqueous liquid is discharged from the steam stripper. The volatilized vapors are then condensed to the liquid phase and introduced into a bioreactor. The bioreactor contains methanotrophic microorganisms which convert the organic contaminants into mainly carbon dioxide. The effluent from the bioreactor is then recycled back to the steam stripper for further processing. 2 figures.

Donaldson, T.L.; Wilson, J.H.

1993-09-21T23:59:59.000Z

251

Heat capacity of liquids: an approach from the solid phase  

E-Print Network [OSTI]

We calculate the energy and heat capacity of a liquid on the basis of its elastic properties and vibrational states. The experimental decrease of liquid heat capacity with temperature is attributed to the increasing loss of two transverse modes with frequency $\\omegaliquid relaxation time. In a simple model, liquid heat capacity is related to viscosity and is compared with the experimental data of mercury. We also calculate the vibrational energy of a quantum liquid, and show that transverse phonons can not be excited in the low-temperature limit. Finally, we discuss the implications of the proposed approach to liquids for the problem of glass transition.

Kostya Trachenko

2008-08-20T23:59:59.000Z

252

Use of ionic liquids as coordination ligands for organometallic catalysts  

DOE Patents [OSTI]

Aspects of the present invention relate to compositions and methods for the use of ionic liquids with dissolved metal compounds as catalysts for a variety of chemical reactions. Ionic liquids are salts that generally are liquids at room temperature, and are capable of dissolving a many types of compounds that are relatively insoluble in aqueous or organic solvent systems. Specifically, ionic liquids may dissolve metal compounds to produce homogeneous and heterogeneous organometallic catalysts. One industrially-important chemical reaction that may be catalyzed by metal-containing ionic liquid catalysts is the conversion of methane to methanol.

Li, Zaiwei (Moreno Valley, CA); Tang, Yongchun (Walnut, CA); Cheng; Jihong (Arcadia, CA)

2009-11-10T23:59:59.000Z

253

Methods of hydrotreating a liquid stream to remove clogging compounds  

DOE Patents [OSTI]

A method includes producing formation fluid from a subsurface in situ heat treatment process. The formation fluid is separated to produce a liquid stream and a gas stream. At least a portion of the liquid stream is provided to a hydrotreating unit. At least a portion of selected in situ heat treatment clogging compositions in the liquid stream are removed to produce a hydrotreated liquid stream by hydrotreating at least a portion of the liquid stream at conditions sufficient to remove the selected in situ heat treatment clogging compositions.

Minderhoud, Johannes Kornelis [Amsterdam, NL; Nelson, Richard Gene [Katy, TX; Roes, Augustinus Wilhelmus Maria [Houston, TX; Ryan, Robert Charles [Houston, TX; Nair, Vijay [Katy, TX

2009-09-22T23:59:59.000Z

254

Ultrasonic characterization of single drops of liquids  

DOE Patents [OSTI]

Ultrasonic characterization of single drops of liquids. The present invention includes the use of two closely spaced transducers, or one transducer and a closely spaced reflector plate, to form an interferometer suitable for ultrasonic characterization of droplet-size and smaller samples without the need for a container. The droplet is held between the interferometer elements, whose distance apart may be adjusted, by surface tension. The surfaces of the interferometer elements may be readily cleansed by a stream of solvent followed by purified air when it is desired to change samples. A single drop of liquid is sufficient for high-quality measurement. Examples of samples which may be investigated using the apparatus and method of the present invention include biological specimens (tear drops; blood and other body fluid samples; samples from tumors, tissues, and organs; secretions from tissues and organs; snake and bee venom, etc.) for diagnostic evaluation, samples in forensic investigations, and detection of drugs in small quantities.

Sinha, Dipen N. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

255

Liquid additives for particulate emissions control  

DOE Patents [OSTI]

The present invention discloses a process for removing undesired particles from a gas stream including the steps of contacting a composition containing an adhesive with the gas stream; collecting the undesired particles and adhesive on a collection surface to form an aggregate comprising the adhesive and undesired particles on the collection surface; and removing the agglomerate from the collection zone. The composition may then be atomized and injected into the gas stream. The composition may include a liquid that vaporizes in the gas stream. After the liquid vaporizes, adhesive particles are entrained in the gas stream. The process may be applied to electrostatic precipitators and filtration systems to improve undesired particle collection efficiency. 11 figs.

Durham, M.D.; Schlager, R.J.; Ebner, T.G.; Stewart, R.M.; Hyatt, D.E.; Bustard, C.J.; Sjostrom, S.

1999-01-05T23:59:59.000Z

256

Comments on Fermi Liquid from Holography  

E-Print Network [OSTI]

We investigate the signatures of Fermi liquid formation in the N=4 super Yang-Mills theory coupled to fundamental hypermultiplet at nonvanishing chemical potential for the global U(1) vector symmetry. At strong 't Hooft coupling the system can be analyzed in terms of the D7 brane dynamics in AdS_5 x S^5 background. The phases with vanishing and finite charge density are separated at zero temperature by a quantum phase transition. In case of vanishing hypermultiplet mass, Karch, Son and Starinets discovered a gapless excitation whose speed equals the speed of sound. We find that this zero sound mode persists to all values of the hypermultiplet mass, and its speed vanishes at the point of phase transition. The value of critical exponent and the ratio of the velocities of zero and first sounds are consistent with the predictions of Landau Fermi liquid theory at strong coupling.

Manuela Kulaxizi; Andrei Parnachev

2008-10-13T23:59:59.000Z

257

Comments on Fermi Liquid from Holography  

E-Print Network [OSTI]

We investigate the signatures of Fermi liquid formation in the N=4 super Yang-Mills theory coupled to fundamental hypermultiplet at nonvanishing chemical potential for the global U(1) vector symmetry. At strong 't Hooft coupling the system can be analyzed in terms of the D7 brane dynamics in AdS_5 x S^5 background. The phases with vanishing and finite charge density are separated at zero temperature by a quantum phase transition. In case of vanishing hypermultiplet mass, Karch, Son and Starinets discovered a gapless excitation whose speed equals the speed of sound. We find that this zero sound mode persists to all values of the hypermultiplet mass, and its speed vanishes at the point of phase transition. The value of critical exponent and the ratio of the velocities of zero and first sounds are consistent with the predictions of Landau Fermi liquid theory at strong coupling.

Kulaxizi, Manuela

2008-01-01T23:59:59.000Z

258

Kinetics of complex plasma with liquid droplets  

SciTech Connect (OSTI)

This paper provides a theoretical basis for the reduction of electron density by spray of water (or other liquids) in hot plasma. This phenomenon has been observed in a hypersonic flight experiment for relief of radio black out, caused by high ionization in the plasma sheath of a hypersonic vehicle, re-entering the atmosphere. The analysis incorporates a rather little known phenomenon for de-charging of the droplets, viz., evaporation of ions from the surface and includes the charge balance on the droplets and number cum energy balance of electrons, ions, and neutral molecules; the energy balance of the evaporating droplets has also been taken into account. The analysis has been applied to a realistic situation and the transient variations of the charge and radius of water droplets, and other plasma parameters have been obtained and discussed. The analysis through made in the context of water droplets is applicable to all liquids.

Misra, Shikha; Sodha, M. S. [Centre of Energy Studies, Indian Institute of Technology Delhi (IITD), New Delhi 110016 (India)] [Centre of Energy Studies, Indian Institute of Technology Delhi (IITD), New Delhi 110016 (India); Mishra, S. K. [Institute for Plasma Research (IPR), Gandhinagar 382428 (India)] [Institute for Plasma Research (IPR), Gandhinagar 382428 (India)

2013-12-15T23:59:59.000Z

259

Hydrophilization of Liquid Surfaces by Plasma Treatment  

E-Print Network [OSTI]

The impact of the cold radiofrequency air plasma on the surface properties of silicone oils (polydimethylsiloxane) was studied. Silicone oils of various molecular masses were markedly hydrophilized by the cold air plasma treatment. A pronounced decrease of the apparent water contact angles was observed after plasma treatment. A general theoretical approach to the calculation of apparent contact angles is proposed. The treated liquid surfaces demonstrated hydrophobic recovery. The characteristic time of the hydrophobic recovery grew with the molecular mass of the silicone oil.

Victor Multanen; Gilad Chaniel; Roman Grynyov; Ron Yosef Loew; Naor Siany; Edward Bormashenko

2014-09-01T23:59:59.000Z

260

System and method for liquid silicon containment  

DOE Patents [OSTI]

This invention relates to a system and a method for liquid silicon containment, such as during the casting of high purity silicon used in solar cells or solar modules. The containment apparatus includes a shielding member adapted to prevent breaching molten silicon from contacting structural elements or cooling elements of a casting device, and a volume adapted to hold a quantity of breaching molten silicon with the volume formed by a bottom and one or more sides.

Cliber, James A; Clark, Roger F; Stoddard, Nathan G; Von Dollen, Paul

2013-05-28T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Dark Matter Search with Moderately Superheated Liquids  

E-Print Network [OSTI]

We suggest the use of moderately superheated liquids in the form of superheated droplet detectors for a new type of neutralino search experiment. The advantage of this method for Dark Matter detection is, that the detector material is cheap, readily available and that it is easily possible to fabricate a large mass detector. Moreover the detector can be made "background blind", i.e. exclusively sensitive to nuclear recoils.

L. A. Hamel; L. Lessard; V. Zacek; Bhaskar Sur

1996-02-14T23:59:59.000Z

262

Photorefractivity in liquid crystalline composite materials  

SciTech Connect (OSTI)

We report recent improvements in the photorefractive of liquid crystalline thin film composites containing electron donor and acceptor molecules. The improvements primarily result from optimization of the exothermicity of the intermolecular charge transfer reaction and improvement of the diffusion characteristics of the photogenerated ions. Intramolecular charge transfer dopants produce greater photorefractivity and a 10-fold decrease in the concentration of absorbing chromophores. The mechanism for the generation of mobile ions is discussed.

Wiederrecht, G.P. [Argonne National Lab., IL (United States); Wasielewski, M.R. [Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry

1997-09-01T23:59:59.000Z

263

Noble Travails: Noble Liquid Dark Matter Detectors  

E-Print Network [OSTI]

, or water, 0.1x flux per 10 cm Cosmic Ray Muons generate high energy neutrons 50 MeV - 3 GeV which are toughGaitskell Noble Travails: Noble Liquid Dark Matter Detectors Rick Gaitskell Particle Astrophysics://particleastro.brown.edu/ http://gaitskell.brown.edu v1 #12;LUX Dark Matter Collaboration 2007 v01_7mm Dark Matter Theory

Golwala, Sunil

264

System and method for liquid silicon containment  

SciTech Connect (OSTI)

This invention relates to a system and a method for liquid silicon containment, such as during the casting of high purity silicon used in solar cells or solar modules. The containment apparatus includes a shielding ember adapted to prevent breaching molten silicon from contacting structural elements or cooling elements of a casting device, and a volume adapted to hold a quantity of breaching molten silicon with the volume formed by a bottom and one or more sides.

Cliber, James A; Clark, Roger F; Stoddard, Nathan G; Von Dollen, Paul

2014-06-03T23:59:59.000Z

265

Ternary liquid scintillator for optical fiber applications  

DOE Patents [OSTI]

A multicomponent liquid scintillator solution for use as a radiation-to-light converter in conjunction with a fiber optic transmission system. The scintillator includes a quantity of 5-amino-9-diethylaminobenz (a) phenoxazonium nitrate (Nile Blue Nitrate) as a solute in a fluor solvent such as benzyl alcohol. The use of PPD as an additional solute is also disclosed. The system is controllable by addition of a suitable quenching agent, such as phenol.

Franks, Larry A. (Santa Barbara, CA); Lutz, Stephen S. (Santa Barbara, CA)

1982-01-01T23:59:59.000Z

266

Collection of liquid from below-ground location  

DOE Patents [OSTI]

A method is described for retrieving liquid from a below-ground collection area by permitting gravity flow of the liquid from the collection area to a first closed container; monitoring the level of the liquid in the closed container; and after the liquid reaches a given level in the first closed container, transferring the liquid to a second closed container disposed at a location above the first closed container, via a conduit, by introducing into the first closed container a gas which is substantially chemically inert with respect to the liquid, the gas being at a pressure sufficient to propel the liquid from the first closed container to the second closed container. 3 figs.

Phillips, S.J.; Alexander, R.G.

1995-05-30T23:59:59.000Z

267

Liquid uranium alloy-helium fission reactor  

DOE Patents [OSTI]

This invention describes a nuclear fission reactor which has a core vessel and at least one tandem heat exchanger vessel coupled therewith across upper and lower passages to define a closed flow loop. Nuclear fuel such as a uranium alloy in its liquid phase fills these vessels and flow passages. Solid control elements in the reactor core vessel are adapted to be adjusted relative to one another to control fission reaction of the liquid fuel therein. Moderator elements in the other vessel and flow passages preclude fission reaction therein. An inert gas such as helium is bubbled upwardly through the heat exchanger vessel operable to move the liquid fuel upwardly therein and unidirectionally around the closed loop and downwardly through the core vessel. This helium gas is further directed to heat conversion means outside of the reactor vessels to utilize the heat from the fission reaction to generate useful output. The nuclear fuel operates in the 1200 to 1800/sup 0/C range, and even higher to 2500/sup 0/C.

Minkov, V.

1984-06-13T23:59:59.000Z

268

Liquid Vortex Shielding for Fusion Energy Applications  

SciTech Connect (OSTI)

Swirling liquid vortices can be used in fusion chambers to protect their first walls and critical elements from the harmful conditions resulting from fusion reactions. The beam tube structures in heavy ion fusion (HIF) must be shielded from high energy particles, such as neutrons, x-rays and vaporized coolant, that will cause damage. Here an annular wall jet, or vortex tube, is proposed for shielding and is generated by injecting liquid tangent to the inner surface of the tube both azimuthally and axially. Its effectiveness is closely related to the vortex tube flow properties. 3-D particle image velocimetry (PIV) is being conducted to precisely characterize its turbulent structure. The concept of annular vortex flow can be extended to a larger scale to serve as a liquid blanket for other inertial fusion and even magnetic fusion systems. For this purpose a periodic arrangement of injection and suction holes around the chamber circumference are used, generating the layer. Because it is important to match the index of refraction of the fluid with the tube material for optical measurement like PIV, a low viscosity mineral oil was identified and used that can also be employed to do scaled experiments of molten salts at high temperature.

Bardet, Philippe M. [University of California, Berkeley (United States); Supiot, Boris F. [University of California, Berkeley (United States); Peterson, Per F. [University of California, Berkeley (United States); Savas, Oemer [University of California, Berkeley (United States)

2005-05-15T23:59:59.000Z

269

Phase-Changing Ionic Liquids: CO2 Capture with Ionic Liquids Involving Phase Change  

SciTech Connect (OSTI)

IMPACCT Project: Notre Dame is developing a new CO2 capture process that uses special ionic liquids (ILs) to remove CO2 from the gas exhaust of coal-fired power plants. ILs are salts that are normally liquid at room temperature, but Notre Dame has discovered a new class of ILs that are solid at room temperature and change to liquid when they bind to CO2. Upon heating, the CO2 is released for storage, and the ILs re-solidify and donate some of the heat generated in the process to facilitate further CO2 release. These new ILs can reduce the energy required to capture CO2 from the exhaust stream of a coal-fired power plant when compared to state-ofthe- art technology.

None

2010-07-01T23:59:59.000Z

270

Equation of State for Supercooled Water Near the Liquid-Liquid Critical Point  

E-Print Network [OSTI]

We have developed a scaled parametric equation of state to describe and predict thermodynamic properties of supercooled water. The equation of state, built on the growing evidence that the critical point of supercooled liquid-liquid water separation exists, is universal in terms of theoretical scaling fields and is shown to belong to the Ising-model class of universality. The theoretical scaling fields are postulated to be analytical combinations of the physical fields, pressure and temperature. The equation of state enables us to accurately locate the "Widom line" (the locus of stability minima) and determine that the critical pressure is considerably lower than predicted by computer simulations.

M. A. Anisimov; D. A. Fuentevilla

2006-09-19T23:59:59.000Z

271

Electromagnetic induction pump for pumping liquid metals and other conductive liquids  

DOE Patents [OSTI]

An electromagnetic induction pump is described in which an electrically conductive liquid is made to flow by means of a force created by interaction of a permanent magnetic field and a DC current. The pump achieves high efficiency through combination of: powerful permanent magnet materials which provide a high strength field that is uniform and constant; steel tubing formed into a coil which is constructed to carry conducting liquids with minimal electrical resistance and heat; and application of a voltage to induce a DC current which continuously produces a force in the direction of the desired flow.

Smither, R.K.

1993-05-11T23:59:59.000Z

272

Liquid-liquid equilibrium of cyclohexane-n-hexane-methanol mixtures; Effect of water content  

SciTech Connect (OSTI)

Experimental liquid-liquid equilibrium data for the ternary system cyclohexane-n-hexane-methanol and for the binary systems n-hexane-methanol and cyclohexane-methanol are presented over a temperature range from 284 to 298{Kappa} at pressure of 0.1 MPa. Attention is given to the effect of the purity of methanol as far as the water content is concerned. The data are correlated by means of excess Gibbs energy models (NRTL and UNIQUAC), and the binary interaction parameters are reported.

Alessi, P.; Fermeglia, M.; Kikic, I. (Istituto di Chimica Applicata e Industriale, University of Trieste, via Valerio 2, I-34127 Trieste (IT))

1989-04-01T23:59:59.000Z

273

Structure and Depletion at Fluoro- and Hydro-carbon/Water Liquid/Liquid Interfaces  

E-Print Network [OSTI]

The results of x-ray reflectivity studies of two oil/water (liquid/liquid) interfaces are inconsistent with recent predictions of the presence of a vapor-like depletion region at hydrophobic/aqueous interfaces. One of the oils, perfluorohexane, is a fluorocarbon whose super-hydrophobic interface with water provides a stringent test for the presence of a depletion layer. The other oil, heptane, is a hydrocarbon and, therefore, is more relevant to the study of biomolecular hydrophobicity. These results are consistent with the sub-angstrom proximity of water to soft hydrophobic materials.

Kaoru Kashimoto; Jaesung Yoon; Binyang Hou; Chiu-hao Chen; Binhua Lin; Makoto Aratono; Takanori Takiue; Mark L. Schlossman

2008-07-18T23:59:59.000Z

274

Electromagnetic induction pump for pumping liquid metals and other conductive liquids  

DOE Patents [OSTI]

An electromagnetic induction pump in which an electrically conductive liquid is made to flow by means of a force created by interaction of a permanent magnetic field and a DC current. The pump achieves high efficiency through combination of: powerful permanent magnet materials which provide a high strength field that is uniform and constant; steel tubing formed into a coil which is constructed to carry conducting liquids with minimal electrical resistance and heat; and application of a voltage to induce a DC current which continuously produces a force in the direction of the desired flow.

Smither, Robert K. (Hinsdale, IL)

1993-01-01T23:59:59.000Z

275

Dye-Induced Enhancement of Optical Nonlinearity in Liquids and Liquid Crystals  

SciTech Connect (OSTI)

Optical nonlinearity of liquid crystals (LC) in the isotropic phase can be enhanced by 1 order of magnitude by dissolving 0.1{percent} of anthraquinone dye in the LC. The enhancement decreases by {approximately}30{percent} when the LC transforms into the nematic phase. The same guest-host effect also exists in non-LC liquids. It can be explained by a model based on the change of guest-host interaction induced by optical excitations of the dye. {copyright} {ital 1996} {ital The American Physical Society}

Muenster, R.; Jarasch, M.; Zhuang, X.; Shen, Y. [Department of Physics, University of California, Berkeley, California 94720-7300 (United States)] [Department of Physics, University of California, Berkeley, California 94720-7300 (United States)

1997-01-01T23:59:59.000Z

276

Durable electrooptic devices comprising ionic liquids  

DOE Patents [OSTI]

Electrolyte solutions for electrochromic devices such as rear view mirrors and displays with low leakage currents are prepared using inexpensive, low conductivity conductors. Preferred electrolytes include bifunctional redox dyes and molten salt solvents with enhanced stability toward ultraviolet radiation. The solvents include lithium or quaternary ammonium cations, and perfluorinated sulfonylimide anions selected from trifluoromethylsulfonate (CF3SO3-), bis(trifluoromethylsulfonyl)imide ((CF3SO2)2N-), bis(perfluoroethylsulfonyl)imide ((CF3CF2SO2)2N-) and tris(trifluoromethylsulfonyl)methide ((CF3SO2)3C-). Electroluminescent, electrochromic and photoelectrochromic devices with nanostructured electrodes include ionic liquids with bifunctional redox dyes.

Agrawal, Anoop (Tucson, AZ); Cronin, John P. (Tucson, AZ); Tonazzi, Juan C. L. (Tucson, AZ); Warner, Benjamin P. (Los Alamos, NM); McCleskey, T. Mark (Los Alamos, NM); Burrell, Anthony K. (Los Alamos, NM)

2005-11-01T23:59:59.000Z

277

Reusable crucible for containing corrosive liquids  

DOE Patents [OSTI]

A reusable, non-wetting, corrosion-resistant material suitable for containment of corrosive liquids is formed of a tantalum or tantalum alloy substrate that is permeated with carbon atoms. The substrate is carburized to form surface layers of TaC and Ta.sub.2 C, and then is heated at high temperature under vacuum until the carbon atoms in the carbide layers diffuse throughout the substrate to form a solid solution of carbon atoms randomly interspersed in the tantalum or tantalum alloy lattice.

de Pruneda, Jean A. H. (Livermore, CA)

1995-01-01T23:59:59.000Z

278

Non-electrolyte viscous liquid mixtures  

E-Print Network [OSTI]

. Equations Proposed for the Dependence of Viscosity of Liquid Mixtures on Chemical Composition at Constant Temperature, 36 TABLE III. TABLE IV. Compar1son of Errors in Determining Mixture Viscosit1es Using the Congruence-Viscos1ty Equat1on 86... states theory simplif1ed the more complex initial equations into the reasonably simple eq 3 lg. For ideal systems there is no "interaction viscosity, ny2 and the equation reduces to 2 + 2 nM Xl"1 X2n2 or nM = ZX 0 2 o o o (3. 20) R1ce compared...

Wakefield, Dawn Lee

1982-01-01T23:59:59.000Z

279

High-pressure liquid chromatographic gradient mixer  

DOE Patents [OSTI]

A gradient mixer effects the continuous mixing of any two miscible solvents without excessive decay or dispersion of the resultant isocratic effluent or of a linear or exponential gradient. The two solvents are fed under low or high pressure by means of two high performance liquid chromatographic pumps. The mixer comprises a series of ultra-low dead volume stainless steel tubes and low dead volume chambers. The two solvent streams impinge head-on at high fluxes. This initial nonhomogeneous mixture is then passed through a chamber packed with spirally-wound wires which cause turbulent mixing thereby homogenizing the mixture with minimum band-broadening.

Daughton, C.G.; Sakaji, R.H.

1982-09-08T23:59:59.000Z

280

Examination of Liquid Fluoride Salt Heat Transfer  

SciTech Connect (OSTI)

The need for high efficiency power conversion and energy transport systems is increasing as world energy use continues to increase, petroleum supplies decrease, and global warming concerns become more prevalent. There are few heat transport fluids capable of operating above about 600oC that do not require operation at extremely high pressures. Liquid fluoride salts are an exception to that limitation. Fluoride salts have very high boiling points, can operate at high temperatures and low pressures and have very good heat transfer properties. They have been proposed as coolants for next generation fission reactor systems, as coolants for fusion reactor blankets, and as thermal storage media for solar power systems. In each case, these salts are used to either extract or deliver heat through heat exchange equipment, and in order to design this equipment, liquid salt heat transfer must be predicted. This paper discusses the heat transfer characteristics of liquid fluoride salts. Historically, heat transfer in fluoride salts has been assumed to be consistent with that of conventional fluids (air, water, etc.), and correlations used for predicting heat transfer performance of all fluoride salts have been the same or similar to those used for water conventional fluids an, water, etc). A review of existing liquid salt heat transfer data is presented, summarized, and evaluated on a consistent basis. Less than 10 experimental data sets have been found in the literature, with varying degrees of experimental detail and measured parameters provided. The data has been digitized and a limited database has been assembled and compared to existing heat transfer correlations. Results vary as well, with some data sets following traditional correlations; in others the comparisons are less conclusive. This is especially the case for less common salt/materials combinations, and suggests that additional heat transfer data may be needed when using specific salt eutectics in heat transfer equipment designs. All of the data discussed above were taken under forced convective conditions (both laminar and turbulent). Some recent data taken at ORNL under free convection conditions are also presented and results discussed. This data was taken using a simple crucible experiment with an instrumented nickel heater inserted in the salt to induce natural circulation within the crucible. The data was taken over a temperature range of 550oC to 650oC in FLiNaK salt. This data covers both laminar and turbulent natural convection conditions, and is compared to existing forms of natural circulation correlations.

Yoder Jr, Graydon L [ORNL] [ORNL

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Reusable crucible for containing corrosive liquids  

DOE Patents [OSTI]

A reusable, non-wetting, corrosion-resistant material suitable for containment of corrosive liquids is formed of a tantalum or tantalum alloy substrate that is permeated with carbon atoms. The substrate is carburized to form surface layers of TaC and Ta[sub 2]C, and then is heated at high temperature under vacuum until the carbon atoms in the carbide layers diffuse throughout the substrate to form a solid solution of carbon atoms randomly interspersed in the tantalum or tantalum alloy lattice. 10 figures.

Pruneda, J.A.H. de.

1995-01-24T23:59:59.000Z

282

LiquidPiston Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolar (Texas) JumpEvent (2) linkedLiquidPiston Inc

283

AEO 2013 Liquid Fuels Markets Working Group  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve3.Revenue (ThousandsAboutsite. IfHome

284

Liquid Propane Injection Applications | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensionalthe10IO1OP001 LetterLight-Duty11.2.13 Liquid Fuels

285

Imaging Liquids Using Microfluidic Cells. | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFun withconfinementEtching. |EndecahemeEMSL Intramolecular CoulombLiquids

286

Algorithmic Cooling in Liquid State NMR  

E-Print Network [OSTI]

Algorithmic cooling is a method that employs thermalization to increase the qubits' purification level, namely it reduces the qubit-system's entropy. We utilized gradient ascent pulse engineering (GRAPE), an optimal control algorithm, to implement algorithmic cooling in liquid state nuclear magnetic resonance. Various cooling algorithms were applied onto the three qubits of 13C2-trichloroethylene, cooling the system beyond Shannon's entropy bound in several different ways. For example, in one experiment a carbon qubit was cooled by a factor of 4.61. This work is a step towards potentially integrating tools of NMR quantum computing into in vivo magnetic resonance spectroscopy.

Yosi Atia; Yuval Elias; Tal Mor; Yossi Weinstein

2014-11-17T23:59:59.000Z

287

Instabilities during liquid migration into superheated hydrothermal systems  

SciTech Connect (OSTI)

Hydrothermal systems typically consist of hot permeable rock which contains either liquid or liquid and saturated steam within the voids. These systems vent fluids at the surface through hot springs, fumaroles, mud pools, steaming ground and geysers. They are simultaneously recharged as meteoric water percolates through the surrounding rock or through the active injection of water at various geothermal reservoirs. In a number of geothermal reservoirs from which significant amounts of hot fluid have been extracted and passed through turbines, superheated regions of vapor have developed. As liquid migrates through a superheated region of a hydrothermal system, some of the liquid vaporizes at a migrating liquid-vapor interface. Using simple physical arguments, and analogue laboratory experiments we show that, under the influence of gravity, the liquid-vapor interface may become unstable and break up into fingers.

Fitzgerald, Shaun D.; Woods, Andrew W.

1995-01-26T23:59:59.000Z

288

Observation of Materials Processes in Liquids in the Electron Microscope  

SciTech Connect (OSTI)

Materials synthesis and the functioning of devices often indispensably involve liquid media. But direct visualization of dynamic process in liquids, especially with high spatial and temporal resolution, has been challenging. For solid materials, advances in aberration corrected electron microscopy have made observation of atomic level features a routine practice. Here we discuss the extent to which one can take advantage of the resolution of modern electron microscopes to image phenomenon occuring in liquids. We will describe the fundamentals of two different experimental approaches, closed and open liquid cells. We will illustrate the capabilities of each approach by considering processes in batteries and nucleation and growth of nanoparticles from solution. We conclude that liquid cell electron microscopy appears to be duly fulfilling its role for in situ studies of nanoscale processes in liquids, revealing physical and chemical processes otherwise difficult to observe.

Wang, Chong M.; Liao, Honggang; Ross, Frances M.

2015-01-01T23:59:59.000Z

289

Shock compression of liquid helium to 56 GPa (560 kbar)  

SciTech Connect (OSTI)

The first shock-compression experiments on liquid helium are reported. With a two-stage light-gas gun, liquid He at 4.3 K and 1 atm was shocked to 16 GPa and 12 000 K and double shocked to 56 GPa and 21 000 K. Liquid perturbation theory has been used to determine an effective interatomic potential from which the equation of state of He can be obtained over a wide range of densities and temperatures.

Nellis, W.J.; Holmes, N.C.; Mitchell, A.C.; Trainor, R.J.; Governo, G.K.; Ross, M.; Young, D.A.

1984-09-24T23:59:59.000Z

290

Superhydrophobic coated apparatus for liquid purification by evaporative condensation  

DOE Patents [OSTI]

Disclosed are examples of apparatuses for evaporative purification of a contaminated liquid. In each example, there is a first vessel for storing the contaminated fluid. The first vessel includes a surface coated with a layer of superhydrophobic material and the surface is at least partially in contact with the contaminated liquid. The contaminants do not adhere to the surface as the purified liquid evaporates, thus simplifying maintenance of the apparatus.

Simpson, John T; McNeany, Steve R; Dinsmore, Thomas V; Hunter, Scott R; Ivanov, Ilia N

2014-03-11T23:59:59.000Z

291

REFINING AND END USE STUDY OF COAL LIQUIDS  

SciTech Connect (OSTI)

This document summarizes all of the work conducted as part of the Refining and End Use Study of Coal Liquids. There were several distinct objectives set, as the study developed over time: (1) Demonstration of a Refinery Accepting Coal Liquids; (2) Emissions Screening of Indirect Diesel; (3) Biomass Gasification F-T Modeling; and (4) Updated Gas to Liquids (GTL) Baseline Design/Economic Study.

Unknown

2002-01-01T23:59:59.000Z

292

The liquid helium storage system for the Large Hadron Collider.  

E-Print Network [OSTI]

The cryogenic system of the Large Hadron Collider (LHC) under operation at CERN has a total helium inventory of 140 t. Up to 50 t can be stored in gas storage tanks. The remaining inventory will be stored in a liquid helium storage system consisting of six 15-t liquid helium tanks in 4 locations. The two liquid helium tanks of specific low heat inleak design and the required infrastructure of the first location were recently commissioned. Four additional tanks shall be operational end 2010. The paper describes the features and characteristics of the liquid helium storage system and presents the measurement of the thermal performance of the two first tanks.

Benda, V; Fathallah, M; Goiffon, T; Parente, C; Perez-Duenas, E; Perret, Ph; Pirotte, O; Serio, L; Vullierme, B

2011-01-01T23:59:59.000Z

293

Compositions and methods useful for ionic liquid treatment of biomass  

SciTech Connect (OSTI)

The present invention provides for novel compositions and methods for recycling or recovering ionic liquid used in IL pretreated cellulose and/or lignocellulosic biomass (LBM).

Dibble, Dean C.; Cheng, Aurelia; George, Anthe

2014-07-29T23:59:59.000Z

294

Biomass and Natural Gas to Liquid Transportation Fuels  

Broader source: Energy.gov [DOE]

Breakout Session 1: New Developments and Hot Topics Session 1-D: Natural Gas & Biomass to Liquids Josephine Elia, Graduate Student, Princeton University

295

Water-saving liquid-gas conditioning system  

DOE Patents [OSTI]

A method for treating a process gas with a liquid comprises contacting a process gas with a hygroscopic working fluid in order to remove a constituent from the process gas. A system for treating a process gas with a liquid comprises a hygroscopic working fluid comprising a component adapted to absorb or react with a constituent of a process gas, and a liquid-gas contactor for contacting the working fluid and the process gas, wherein the constituent is removed from the process gas within the liquid-gas contactor.

Martin, Christopher; Zhuang, Ye

2014-01-14T23:59:59.000Z

296

Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume...  

Office of Environmental Management (EM)

1: Availability of Feedstock and Technology Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume 1: Availability of Feedstock and Technology Municipal solid waste (MSW) is...

297

Fabrication of fiber supported ionic liquids and methods of use  

DOE Patents [OSTI]

One or more embodiments relates to the production of a fabricated fiber having an asymmetric polymer network and having an immobilized liquid such as an ionic liquid within the pores of the polymer network. The process produces the fabricated fiber in a dry-wet spinning process using a homogenous dope solution, providing significant advantage over current fabrication methods for liquid-supporting polymers. The fabricated fibers may be effectively utilized for the separation of a chemical species from a mixture based on the selection of the polymer, the liquid, and the solvent utilized in the dope.

Luebke, David R; Wickramanayake, Shan

2013-02-26T23:59:59.000Z

298

Ionic Liquids as Novel Engine Lubricants or Lubricant Additives...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Additives Ionic Liquids as Novel Engine Lubricants or Lubricant Additives Bench test results showed that compared with fully-formulated engine oils, selected low-viscosity...

299

Bio-Derived Liquids to Hydrogen Distributed Reforming Working...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Working Group (BILIWG), Hydrogen Separation and Purification Working Group (PURIWG) & Hydrogen Production Technical Team Bio-Derived Liquids to Hydrogen Distributed Reforming...

300

Bio-Derived Liquids to Hydrogen Distributed Reforming Targets  

Broader source: Energy.gov [DOE]

Presentation by Arlene Anderson at the October 24, 2006 Bio-Derived Liquids to Hydrogen Distributed Reforming Working Group Kick-Off Meeting.

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Controlled Rapid Pressurization Using Liquid Propellants for EGS Well Stimulation  

Broader source: Energy.gov [DOE]

Project objective: Investigate the use of non-toxic? or negligible environmental impact liquid propellants for the stimulation of geothermal fields.

302

Solid-Liquid Separation of Animal Manure and Wastewater  

E-Print Network [OSTI]

Solid-liquid separation is an alternative treatment for animal manure and process-generated wastewater. This publication explains the techniques, equipment, performance and economics of separators....

Mukhtar, Saqib; Sweeten, John M.; Auvermann, Brent W.

1999-10-19T23:59:59.000Z

303

Catalyst-Assisted Production of Olefins from Natural Gas Liquids...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Catalyst-Assisted Production of Olefins from Natural Gas Liquids: Prototype Development and Full-Scale Testing, April 2013 Catalyst-Assisted Production of Olefins from Natural Gas...

304

Existence of solutions to boundary value problems for smectic liquid ...  

E-Print Network [OSTI]

Existence of solutions to boundary value problems for smectic liquid crys- tals. Abstract. We investigate variational problems for an energy developed by the.

2009-05-25T23:59:59.000Z

305

Direct-Current Resistivity At Cove Fort Area - Liquid (Warpinski...  

Open Energy Info (EERE)

Warpinski, Et Al., 2004) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Direct-Current Resistivity At Cove Fort Area - Liquid (Warpinski, Et...

306

Lipid extraction from microalgae using a single ionic liquid  

DOE Patents [OSTI]

A one-step process for the lysis of microalgae cell walls and separation of the cellular lipids for use in biofuel production by utilizing a hydrophilic ionic liquid, 1-butyl-3-methylimidazolium. The hydrophilic ionic liquid both lyses the microalgae cell walls and forms two immiscible layers, one of which consists of the lipid contents of the lysed cells. After mixture of the hydrophilic ionic liquid with a suspension of microalgae cells, gravity causes a hydrophobic lipid phase to move to a top phase where it is removed from the mixture and purified. The hydrophilic ionic liquid is recycled to lyse new microalgae suspensions.

Salvo, Roberto Di; Reich, Alton; Dykes, Jr., H. Waite H.; Teixeira, Rodrigo

2013-05-28T23:59:59.000Z

307

Algae: The Source of Reliable, Scalable, and Sustainable Liquid...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Scalable, and Sustainable Liquid Transportation Fuels At the February 12, 2009 joint Web conference of DOE's Biomass and Clean Cities programs, Brian Goodall (Sapphire Energy)...

308

Use of graphitized carbon beads for gas liquid chromatography  

DOE Patents [OSTI]

Carbonized resin microspheroids are used as a column packing in gas-solid chromatography and as a support in gas-liquid chromatography.

Talmi, Yair (Oak Ridge, TN); Pollock, Charles B. (Oak Ridge, TN)

1976-01-01T23:59:59.000Z

309

Electric field effects in liquid crystals with dielectric dispersion  

SciTech Connect (OSTI)

The project is focused on the experimental and theoretical exploration of the coupling of an externally applied electric field and a nematic liquid crystal.

Lavrentovich, Oleg D. [Kent State University

2014-11-29T23:59:59.000Z

310

aqueous liquid waste: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Majda 2005-01-01 18 Momentum, Heat, and Neutral Mass Transport in Convective Atmospheric Pressure Plasma-Liquid Systems and Implications for Aqueous Targets CERN Preprints...

311

Methods of making composite optical devices employing polymer liquid crystal  

DOE Patents [OSTI]

Composite optical devices are disclosed using polymer liquid crystal materials both as optical and adhesive elements. The devices are made by assembling a heated polymer liquid crystal compound, while in a low viscosity form between optically transparent substrates. The molecules of the polymer are oriented, while in the liquid crystalline state and while above the glass transition temperature (T[sub g]) of the polymer, to provide the desired optical effects, such as polarization, and selective reflection. The liquid crystal polymer cements the substrates together to form an assembly providing the composite optical device. 7 figures.

Jacobs, S.D.; Marshall, K.L.; Cerqua, K.A.

1991-10-08T23:59:59.000Z

312

Methods of making composite optical devices employing polymer liquid crystal  

DOE Patents [OSTI]

Composite optical devices using polymer liquid crystal materials both as optical and adhesive elements. The devices are made by assembling a heated polymer liquid crystal compound, while in a low viscosity form between optically transparent substrates. The molecules of the polymer are oriented, while in the liquid crystalline state and while above the glass transition temperature (T.sub.g) of the polymer, to provide the desired optical effects, such as polarization, and selective reflection. The liquid crystal polymer cements the substrates together to form an assembly providing the composite optical device.

Jacobs, Stephen D. (Pittsford, NY); Marshall, Kenneth L. (Henrietta, NY); Cerqua, Kathleen A. (Fairport, NY)

1991-01-01T23:59:59.000Z

313

Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Based On Liquid-Crystal Microflows. Abstract: The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption,...

314

Bio-Derived Liquids to Hydrogen Distributed Reforming Targets...  

Broader source: Energy.gov (indexed) [DOE]

Development Manager, U.S. DOE Office of Energy Efficiency and Renewable Energy Hydrogen, Fuel Cells and Infrastructure Technologies Program Bio-Derived Liquids to Hydrogen...

315

Liquid Hydrogen Production and Delivery from a Dedicated Wind...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

a Dedicated Wind Power Plant Liquid Hydrogen Production and Delivery from a Dedicated Wind Power Plant This May 2012 study assesses the costs and potential for remote renewable...

316

Aprotic Heterocyclic Anion Triazolide Ionic Liquids - A New Class of Ionic Liquid Anion Accessed by the Huisgen Cycloaddition Reaction  

SciTech Connect (OSTI)

The triazole core is a highly versatile heterocyclic ring which can be accessed easily with the Cu(I)-catalyzed Huisgen cycloaddition reaction. Herein we present the preparation of ionic liquids that incorporate a 1,2,3-triazolide anion. These ionic liquids were prepared by a facile procedure utilizing a base-labile pivaloylmethyl group at the 1-position, which can act as precursors to 1H- 4-substituted 1,2,3-triazole. These triazoles were then subsequently converted into ionic liquids after deprotonation using an appropriate ionic liquid cation hydroxide. The densities and thermal decompositions of these ionic liquids were measured. These novel ionic liquids have potential applications in gas separations and in metal-free catalysis.

Thompson, Robert L.; Damodaran, Krishnan; Luebke, David; Nulwala, Hunaid

2013-06-01T23:59:59.000Z

317

Ultrasonic characterization of single drops of liquids  

DOE Patents [OSTI]

Ultrasonic characterization of single drops of liquids is disclosed. The present invention includes the use of two closely spaced transducers, or one transducer and a closely spaced reflector plate, to form an interferometer suitable for ultrasonic characterization of droplet-size and smaller samples without the need for a container. The droplet is held between the interferometer elements, whose distance apart may be adjusted, by surface tension. The surfaces of the interferometer elements may be readily cleansed by a stream of solvent followed by purified air when it is desired to change samples. A single drop of liquid is sufficient for high-quality measurement. Examples of samples which may be investigated using the apparatus and method of the present invention include biological specimens (tear drops; blood and other body fluid samples; samples from tumors, tissues, and organs; secretions from tissues and organs; snake and bee venom, etc.) for diagnostic evaluation, samples in forensic investigations, and detection of drugs in small quantities. 5 figs.

Sinha, D.N.

1998-04-14T23:59:59.000Z

318

Liquid suspensions of reversible metal hydrides  

DOE Patents [OSTI]

The reversibility of the process M + x/2 H/sub 2/ ..-->.. MH/sub x/, where M is a metal hydride former that forms a hydride MH/sub x/ in the presence of H/sub 2/, generally used to store and recall H/sub 2/, is found to proceed under a liquid, thereby to reduce contamination, provide better temperature control and provide in situ mobility of the reactants. Thus, a slurry of particles of a metal hydride former with an inert solvent is subjected to temperature and pressure controlled atmosphere containing H/sub 2/, to store hydrogen (at high pressures) and to release (at low pressures) previously stored hydrogen. The direction of the flow of the H/sub 2/ through the liquid is dependent upon the H/sub 2/ pressure in the gas phase at a given temperature. When the former is above the equilibrium absorption pressure of the respective hydride the reaction proceeds to the right, i.e., the metal hydride is formed and hydrogen is stored in the solid particle. When the H/sub 2/ pressure in the gas phase is below the equilibrium dissociation pressure of the respective hydride the reaction proceeds to the left, the metal hydride is decomposed and hydrogen is released into the gas phase.

Reilly, J.J.; Grohse, E.W.; Winsche, W.E.

1983-12-08T23:59:59.000Z

319

Liquid chromatographic analysis of coal surface properties  

SciTech Connect (OSTI)

The main objectives of this proposed research are to refine further the inverse liquid chromatography technique for the study of surface properties of raw coals, treated coals and coal minerals in water, to evaluate relatively surface properties of raw coals, treated coals and coal minerals by inverse liquid chromatography, and to evaluate floatability of various treated coals in conjunction with surface properties of coals. Alcohols such as methanol, ethanol, isopropanol, isobutanol, tert-butanol, heptanol, 1-hexadecanol, 2-methyl-pentanol, 4-methyl-2-penthanol (methylisobutyl carbinol), n-octanol, s-octanol, and cyclohexanol as probe compounds are utilized to evaluate hydrophilicity of coals and coal minerals. N-alkanes such as hexane, heptane and octane, and stearic acid are employed as probe compounds to evaluate hydrophobicity of coals and coal minerals. Aromatic compounds such as benzene and toluene as probe compounds are used to examine aromaticity of coal surface. Aromatic acids such as o-cresol, m-cresol, p-cresol, phenol and B-naphthol are used to detect aromatic acidic sites of coal surface. Hydrophilicity, hydrophobicity and aromaticity of surfaces for either raw coals or treated coals in water are relatively determined by evaluating both equilibrium physical/chemical adsorption and dynamic adsorption of probe compounds on various raw coals and treated coals to compare affinities of coals for water.

Kwon, K.C.

1991-01-01T23:59:59.000Z

320

Future radioactive liquid waste streams study  

SciTech Connect (OSTI)

This study provides design planning information for the Radioactive Liquid Waste Treatment Facility (RLWTF). Predictions of estimated quantities of Radioactive Liquid Waste (RLW) and radioactivity levels of RLW to be generated are provided. This information will help assure that the new treatment facility is designed with the capacity to treat generated RLW during the years of operation. The proposed startup date for the RLWTF is estimated to be between 2002 and 2005, and the life span of the facility is estimated to be 40 years. The policies and requirements driving the replacement of the current RLW treatment facility are reviewed. Historical and current status of RLW generation at Los Alamos National Laboratory are provided. Laboratory Managers were interviewed to obtain their insights into future RLW activities at Los Alamos that might affect the amount of RLW generated at the Lab. Interviews, trends, and investigation data are analyzed and used to create scenarios. These scenarios form the basis for the predictions of future RLW generation and the level of RLW treatment capacity which will be needed at LANL.

Rey, A.S.

1993-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Strong liquid-crystalline polymeric compositions  

DOE Patents [OSTI]

Strong liquid-crystalline polymeric (LCP) compositions of matter are described. LCP backbones are combined with liquid crystalline (LC) side chains in a manner which maximizes molecular ordering through interdigitation of the side chains, thereby yielding materials which are predicted to have superior mechanical properties over existing LCPs. The theoretical design of LCPs having such characteristics includes consideration of the spacing distance between side chains along the backbone, the need for rigid sections in the backbone and in the side chains, the degree of polymerization, the length of the side chains, the regularity of the spacing of the side chains along the backbone, the interdigitation of side chains in sub-molecular strips, the packing of the side chains on one or two sides of the backbone to which they are attached, the symmetry of the side chains, the points of attachment of the side chains to the backbone, the flexibility and size of the chemical group connecting each side chain to the backbone, the effect of semiflexible sections in the backbone and the side chains, and the choice of types of dipolar and/or hydrogen bonding forces in the backbones and the side chains for easy alignment. 27 figures.

Dowell, F.

1993-12-07T23:59:59.000Z

322

Liquid-Liquid Transition at Tg and Stable-Glass Phase Nucleation Rate Maximum at the Kauzmann Temperature TK  

E-Print Network [OSTI]

An undercooled liquid is unstable. The driving force of the glass transition at Tg is a change of the undercooled-liquid Gibbs free energy. The classical Gibbs free energy change for a crystal formation is completed including an enthalpy saving. The crystal growth critical nucleus is used as a probe to observe the Laplace pressure change Dp accompanying the enthalpy change -Vm*Dp at Tg where Vm is the molar volume. A stable glass-liquid transition model predicts the specific heat jump of fragile liquids at temperatures smaller than Tg, the Kauzmann temperature TK where the liquid entropy excess with regard to crystal goes to zero, the equilibrium enthalpy between TK and Tg, the maximum nucleation rate at TK of superclusters containing magic atom numbers, and the equilibrium latent heats at Tg and TK. Strong-to-fragile and strong-to-strong liquid transitions at Tg are also described and all their thermodynamic parameters are determined from their specific heat jumps. The existence of fragile liquids quenched in the amorphous state, which do not undergo liquid-liquid transition during heating preceding their crystallization, is predicted. Long ageing times leading to the formation at TK of a stable glass composed of superclusters containing up to 147 atoms, touching and interpenetrating, are evaluated from nucleation rates.

Robert Felix Tournier

2014-04-25T23:59:59.000Z

323

NOCHAR Polymers: An Aqueous and Organic Liquid Solidification Process for Cadarache LOR (Liquides Organiques Radioactifs) - 13195  

SciTech Connect (OSTI)

To handle the Very Low Level Waste (VLLW) and the Low Level Waste (LLW) in France, two options can be considered: the incineration at CENTRACO facility and the disposal facility on ANDRA sites. The waste acceptance in these radwaste routes is dependent upon the adequacy between the waste characteristics (physical chemistry and radiological) and the radwaste route specifications. If the waste characteristics are incompatible with the radwaste route specifications (presence of significant quantities of chlorine, fluorine, organic component etc or/and high activity limits), it is necessary to find an alternative solution that consists of a waste pre-treatment process. In the context of the problematic Cadarache LOR (Liquides Organiques Radioactifs) waste streams, two radioactive scintillation cocktails have to be treated. The first one is composed of organic liquids at 13.1 % (diphenyloxazol, mesitylene, TBP, xylene) and water at 86.9 %. The second one is composed of TBP at 8.6 % and water at 91.4 %. They contain chlorine, fluorine and sulphate and have got alpha/beta/gamma spectra with mass activities equal to some kBq.g{sup -1}. Therefore, tritium is present and creates the second problematic waste stream. As a consequence, in order for disposal acceptance at the ANDRA site, it is necessary to pre-treat the waste. The NOCHAR polymers as an aqueous and organic liquid solidification process seem to be an adequate solution. Indeed, these polymers constitute an important variety of products applied to the treatment of radioactive aqueous and organic liquids (solvent, oil, solvent/oil mixing etc) and sludge through a mechanical and chemical solidification process. For Cadarache LOR, N910 and N960 respectively dedicated to the organic and aqueous liquids solidification are considered. With the N910, the organic waste solidification occurs in two steps. As the organic liquid travels moves through the polymer strands, the strands swell and immobilise the liquid. Then as the polymer-organic cure, over time, the polymer continues to collapse on the organic to create a permanent bond. The N960 has the ability to absorb aqueous waste up to 100 times its own weight. It creates a strong mechanical bond which permanently traps the contamination imbedded in the aqueous liquids. As a consequence, these two polymers seem to be able to constitute a suitable solidification matrix for a final acceptance in storage on ANDRA sites. In order to validate the polymers as an acceptable aqueous and organic solidification process for Cadarache LOR, some solidification tests realized with N910 and N960, have been carried out for different Waste/Polymer ratios. The determination of the best Waste/Polymer ratio and of the optimal experimental parameters has been made through an exudation test. Indeed, the process prevents leaching and it results in the absence of residual free organic or aqueous liquid which is forbidden in storage by ANDRA specifications. With these test results, we generated scientific data which are fundamental to obtain an ANDRA agreement. As a conclusion, the aim of this study is to demonstrate that the solidification by polymers can constitute a pre-treatment solution for Cadarache LOR and more generally, for various organic and mixed organic/aqueous waste which can not be directly acceptable at CENTRACO facility or at ANDRA storage sites. This work is, therefore, a solid background to demonstrate the feasibility of the waste pre-treatment by solidification with polymers and to encourage the development of this process. (authors)

Vaudey, Claire-Emilie; Renou, Sebastien; Porco, Julien [AREVA CL BU, STMI ZAC de Courcelle 1 route de la Noue 91196 Gif-sur-Yvette (France)] [AREVA CL BU, STMI ZAC de Courcelle 1 route de la Noue 91196 Gif-sur-Yvette (France); Kelley, Dennis [Pacific World Trade, Inc. Hillsdale Technical Center 6970 Hillsdale Court Indianapolis, Indiana 46250 (United States)] [Pacific World Trade, Inc. Hillsdale Technical Center 6970 Hillsdale Court Indianapolis, Indiana 46250 (United States); Cochaud, Chantal [CEA Cadarache, DSN/SGTD, 13108 St Paul Lez Durance Cedex (France)] [CEA Cadarache, DSN/SGTD, 13108 St Paul Lez Durance Cedex (France); Serrano, Roger [CEA Marcoule, DPAD, BP 17171, 30207 Bagnols sur Ceze Cedex (France)] [CEA Marcoule, DPAD, BP 17171, 30207 Bagnols sur Ceze Cedex (France)

2013-07-01T23:59:59.000Z

324

University of Southern California Mork Family  

E-Print Network [OSTI]

State University Abstract: The Landfill Gas (LFG) collection systems are designed to collect methane gas

Southern California, University of

325

NSTX Liquid Lithium Divertor (LLD) Design Status and Plans  

E-Print Network [OSTI]

NSTX Liquid Lithium Divertor (LLD) Design Status and Plans Office of Science H. W. Kugel, PPPL Design Status and Plans (Kugel) 2July 28, 2008 Motivation for NSTX Lithium Research · NSTX research with solid lithium is aimed initially towards using liquid lithium to control density, edge collisionality

Princeton Plasma Physics Laboratory

326

Liquid Lithium Wall Experiments in CDX-U R. Majeski,  

E-Print Network [OSTI]

Liquid Lithium Wall Experiments in CDX-U R. Kaita, a R. Majeski, a S. Luckhardt, b R. Doerner, b M ABSTRACT The concept of a flowing lithium first wall for a fusion reactor may lead to a significant advance is intensely heated and well diagnosed, and an extensive liquid lithium plasma-facing surface will be used

California at Los Angeles, University of

327

OIL DROPLET MANIPULATION USING LIQUID DIELECTROPHORESIS ON ELECTRET WITH SUPERLYOPHOBIC  

E-Print Network [OSTI]

OIL DROPLET MANIPULATION USING LIQUID DIELECTROPHORESIS ON ELECTRET WITH SUPERLYOPHOBIC SURFACES flow friction for water and oil. Charge stability of electret in liquid is much improved with new hysteresis of SLS for oil droplets are experimentally demonstrated, indicating low motion resistance

Kasagi, Nobuhide

328

Global Assessments and Guidelines for Sustainable Liquid Biofuel  

E-Print Network [OSTI]

Global Assessments and Guidelines for Sustainable Liquid Biofuel Production in Developing Countries Biofuel Production in Developing Countries FINAL REPORT A GEF Targeted Research Project Organized by Bernd for Sustainable Liquid Biofuels. A GEF Targeted Research Project. Heidelberg/Paris/Utrecht/Darmstadt, 29 February

329

STEADY STATE LIQUID CRYSTAL THERMOGRAPHY AND HEAT TRANSFER MEASUREMENTS ON  

E-Print Network [OSTI]

Chapter V STEADY STATE LIQUID CRYSTAL THERMOGRAPHY AND HEAT TRANSFER MEASUREMENTS ON SURFACES Composite Heat Transfer Surface Liquid Crystal Image Processing Technique V . 4 Experimental Results and Discussion Test Conditions and Data Analysis Application to Endwall Heat Transfer Problem Further Application

Camci, Cengiz

330

Elementary excitations of liquid 4 He in aerogel  

E-Print Network [OSTI]

Elementary excitations of liquid 4 He in aerogel O. Plantevin and B. Fa°k Commissariat a` l-roton excitations of liquid 4 He immersed in aerogel of 95% porosity have been measured using inelastic neutron.25 K. Aerogel grown with deuterated materials not exposed to air was used and measure- ments in bulk

Glyde, Henry R.

331

High average power laser using a transverse flowing liquid host  

DOE Patents [OSTI]

A laser includes an optical cavity. A diode laser pumping device is located within the optical cavity. An aprotic lasing liquid containing neodymium rare earth ions fills the optical cavity. A circulation system that provides a closed loop for circulating the aprotic lasing liquid into and out of the optical cavity includes a pump and a heat exchanger.

Ault, Earl R.; Comaskey, Brian J.; Kuklo, Thomas C.

2003-07-29T23:59:59.000Z

332

MOTT INSULATORS, SPIN LIQUIDS AND QUANTUM DISORDERED SUPERCONDUCTIVITY  

E-Print Network [OSTI]

COURSE 7 MOTT INSULATORS, SPIN LIQUIDS AND QUANTUM DISORDERED SUPERCONDUCTIVITY MATTHEW P.A. FISHER insulators and quantum magnetism 583 3.1 Spin models and quantum magnetism . . . . . . . . . . . . . . . . . . . . . . . . . . . . 637 #12;MOTT INSULATORS, SPIN LIQUIDS AND QUANTUM DISORDERED SUPERCONDUCTIVITY Matthew P.A. Fisher

333

Heterogeneous cavitation in liquid helium 4 near a glass plate  

E-Print Network [OSTI]

Heterogeneous cavitation in liquid helium 4 near a glass plate X. Chavanne, S. Balibar and F wave to study cavitation, i.e. the nucleation of bubbles, in liquid helium 4 near a clean glass plate and threshold pressures in the range 0 to -3 bar, significantly less negative than for homogeneous cavitation

Caupin, Frédéric

334

Head-on impact of liquid drops Robert D. Schroll  

E-Print Network [OSTI]

) ]1/2 U0 impact speed 1 m/s C speed of sound 1500 m/s Us variation ! liquid ejected radially ! = radius / impact speed impact time-scale #12;Deformation Dominated by Inertia volume conservation ! pressure variation ! liquid ejected radially ! = radius / impact speed

Zhang, Wendy

335

PHASE TRANSITION NEAR A LIQUID-GAS COEXISTENCE EQUILIBRIUM  

E-Print Network [OSTI]

, are the states in which gas and liquid can stay in equilibrium. We denote c± = -p (±), the speed of sound) in general in a oscillatory manner with fre- quency determined in part by the speeds of sound in gas, the time needed for the sound wave to travel in liquid from the interface to the tube boundary

Wang, Xiao-Ping

336

Second-order Schemes for Steady Weakly Compressible Liquid Flows  

E-Print Network [OSTI]

]. Under such circumstances, the speed of sound is much larger than the velocity of the liquid, resulting-differences, such flows may display compressibility effects. Mach number, the ratio of fluid velocity to speed of sound1 Second-order Schemes for Steady Weakly Compressible Liquid Flows I. J. Keshtiban , F. Belblidia

Grant, P. W.

337

Liquids: Condensed, disordered, and sometimes complex David Chandler1  

E-Print Network [OSTI]

and foams and domain structures of fluid membranes. They also play a significant role in forces affecting liquids approaching a glass transition. In this case, its source is correlated molecular dynamics. In particular, mol- ecules in glass-forming supercooled liquids are so tightly packed that no significant

Chandler, David

338

Conversion of olefins to liquid motor fuels  

DOE Patents [OSTI]

Linear and/or branched claim C.sub.2 to C.sub.12 olefins are converted to hydrocarbon mixtures suitable for use as liquid motor fuels by contact with a catalyst capable of ensuring the production of desirable products with only a relatively minor amount of heavy products boiling beyond the diesel oil range. The catalyst having desirable stability during continuous production operations, comprises a steam stabilized zeolite Y catalyst of hydrophobic character, desirably in aluminum-extracted form. The olefins such as propylene, may be diluted with inerts, such as paraffins or with water, the latter serving to moderate the acidity of the catalyst, or to further moderate the activity of the aluminum-extracted catalyst, so as to increase the effective life of the catalyst.

Rabo, Jule A. (Armonk, NY); Coughlin, Peter K. (Yorktown Heights, NY)

1988-01-01T23:59:59.000Z

339

Durable Electrooptic Devices Comprising Ionic Liquids  

DOE Patents [OSTI]

Electrolyte solutions for electrochromic devices such as rear view mirrors and displays with low leakage currents are prepared using inexpensive, low conductivity conductors. Preferred electrolytes include bifunctional redox dyes and molten salt solvents with enhanced stability toward ultraviolet radiation. The solvents include lithium or quaternary ammonium cations, and perfluorinated sulfonylimide anions selected from trifluoromethylsulfonate (CF.sub.3SO.sub.3.sup.-), bis(trifluoromethylsulfonyl)imide ((CF.sub.3SO.sub.2).sub.2N.sup.-), bis(perfluoroethylsulfonyl)imide ((CF.sub.3CF.sub.2SO.sub.2).sub.2N.sup.-) and tris(trifluoromethylsulfonyl)methide ((CF.sub.3SO.sub.2).sub.3C.sup.-). Electroluminescent, electrochromic and photoelectrochromic devices with nanostructured electrodes include ionic liquids with bifunctional redox dyes. Some of the electrolyte solutions color to red when devices employing the solutions are powered, leading to red or neutral electrooptic devices.

Burrell, Anthony K. (Los Alamos, NM); Agrawal, Anoop (Tucson, AZ); Cronin, John P. (Tucson, AZ); Tonazzi, Juan C. L. (Tucson, AZ); Warner, Benjamin P. (Los Alamos, NM); McCleskey, T. Mark (Los Alamos, NM)

2008-11-11T23:59:59.000Z

340

Durable electrooptic devices comprising ionic liquids  

DOE Patents [OSTI]

Electrolyte solutions for electrochromic devices such as rear view mirrors and displays with low leakage currents are prepared using inexpensive, low conductivity conductors. Preferred electrolytes include bifunctional redox dyes and molten salt solvents with enhanced stability toward ultraviolet radiation. The solvents include lithium or quaternary ammonium cations, and perfluorinated sulfonylimide anions selected from trifluoromethylsulfonate (CF.sub.3SO.sub.3.sup.-), bis(trifluoromethylsulfonyl)imide ((CF.sub.3SO.sub.2).sub.2N.sup.-), bis(perfluoroethylsulfonyl)imide ((CF.sub.3CF.sub.2SO.sub.2).sub.2N.sup.-) and tris(trifluoromethylsulfonyl)methide ((CF.sub.3SO.sub.2).sub.3C.sup.-). Electroluminescent, electrochromic and photoelectrochromic devices with nanostructured electrodes include ionic liquids with bifunctional redox dyes.

Warner, Benjamin P. (Los Alamos, NM); McCleskey, T. Mark (Los Alamos, NM); Burrell, Anthony K. (Los Alamos, NM)

2006-10-10T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Durable electrooptic devices comprising ionic liquids  

DOE Patents [OSTI]

Electrolyte solutions for electrochromic devices such as rear view mirrors and displays with low leakage currents are prepared using inexpensive, low conductivity conductors. Preferred electrolytes include bifunctional redox dyes and molten salt solvents with enhanced stability toward ultraviolet radiation. The solvents include lithium or quaternary ammonium cations, and perfluorinated sulfonylimide anions selected from trifluoromethylsulfonate (CF.sub.3SO.sub.3.sup.-), bis(trifluoromethylsulfonyl)imide ((CF.sub.3SO.sub.2).sub.2N.sup.-), bis(perfluoroethylsulfonyl)imide ((CF.sub.3CF.sub.2SO.sub.2).sub.2N.sup.-) and tris(trifluoromethylsulfonyl)methide ((CF.sub.3SO.sub.2).sub.3C.sup.-). Electroluminescent, electrochromic and photoelectrochromic devices with nanostructured electrodes include ionic liquids with bifunctional redox dyes. Some of the electrolyte solutions color to red when devices employing the solutions are powered, leading to red or neutral electrooptic devices.

Burrell, Anthony K. (Los Alamos, NM); Agrawal, Anoop (Tucson, AZ); Cronin; John P. (Tucson, AZ); Tonazzi, Juan C. L. (Tucson, AZ); Warner, Benjamin P. (Los Alamos, NM); McCleskey, T. Mark (Los Alamos, NM)

2009-12-15T23:59:59.000Z

342

Ternary liquid mixture viscosities and densities  

SciTech Connect (OSTI)

Liquid mixture viscosities and densities have been measured at 298.15 K and ambient pressure for 20 ternary systems. Twelve ternary compositions, encompassing the entire composition range, have been chosen for each system in an effort to test a newly proposed predictive equation based on local compositions. Viscosities calculated by using the local composition model agreed with the experimental data within an average absolute deviation of 6.4%. No adjustable parameters were used and only binary interactions in the form of NRTL constants were input. The results of these studies indicate that the local composition model predictions are generally as good for multicomponent systems as they are for the corresponding binaries. 24 references, 3 tables.

Wei, I.C.; Rowley, R.L.

1984-01-01T23:59:59.000Z

343

Biomass gasification for liquid fuel production  

SciTech Connect (OSTI)

In our old fix-bed autothermal gasifier we tested wood chips and wood pellets. We make experiments for Czech company producing agro pellets - pellets made from agricultural waste and fastrenewable natural resources. We tested pellets from wheat and rice straw and hay. These materials can be very perspective, because they do?t compete with food production, they were formed in sufficient quantity and in the place of their treatment. New installation is composed of allothermal biomass fixed bed gasifier with conditioning and using produced syngas for Fischer - Tropsch synthesis. As a gasifying agent will be used steam. Gas purification will have two parts - separation of dust particles using a hot filter and dolomite reactor for decomposition of tars. In next steps, gas will be cooled, compressed and removed of sulphur and chlorine compounds and carbon dioxide. This syngas will be used for liquid fuel synthesis.

Najser, Jan, E-mail: jan.najser@vsb.cz, E-mail: vaclav.peer@vsb.cz; Peer, Vclav, E-mail: jan.najser@vsb.cz, E-mail: vaclav.peer@vsb.cz [VSB - Technical university of Ostrava, Energy Research Center, 17. listopadu 15/2172, 708 33 Ostrava-Poruba (Czech Republic); Vantuch, Martin [University of Zilina, Faculty of Mechanical Engineering, Department of Power Engineering, Univerzitna 1, 010 26 Zilina (Slovakia)

2014-08-06T23:59:59.000Z

344

Acetonitrile Drastically Boosts Conductivity of Ionic Liquids  

E-Print Network [OSTI]

We apply a new methodology in the force field generation (PCCP 2011, 13, 7910) to study the binary mixtures of five imidazolium-based room-temperature ionic liquids (RTILs) with acetonitrile (ACN). The investigated RTILs are composed of tetrafluoroborate (BF4) anion and dialkylimidazolium cations, where one of the alkyl groups is methyl for all RTILs, and the other group is different for each RTILs, being ethyl (EMIM), butyl (BMIM), hexyl (HMIM), octyl (OMIM), and decyl (DMIM). Specific densities, radial distribution functions, ionic cluster distributions, heats of vaporization, diffusion constants, shear viscosities, ionic conductivities, and their correlations are discussed. Upon addition of ACN, the ionic conductivity of RTILs is found to increase by more than 50 times, that significantly exceeds an impact of most known solvents. Remarkably, the sharpest conductivity growth is found for the long-tailed imidazolium-based cations. This new fact motivates to revisit an application of these binary systems as a...

Chaban, Vitaly V; Kalugin, Oleg N; Prezhdo, Oleg V

2012-01-01T23:59:59.000Z

345

Interface for liquid chromatograph-mass spectrometer  

DOE Patents [OSTI]

A moving belt interface for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer.

Andresen, Brian D. (Pleasanton, CA); Fought, Eric R. (Livermore, CA)

1989-01-01T23:59:59.000Z

346

Interface for liquid chromatograph-mass spectrometer  

DOE Patents [OSTI]

A moving belt interface is described for real-time, high-performance liquid chromatograph (HPLC)/mass spectrometer (MS) analysis which strips away the HPLC solvent as it emerges from the end of the HPLC column and leaves a residue suitable for mass-spectral analysis. The interface includes a portable, stand-alone apparatus having a plural stage vacuum station, a continuous ribbon or belt, a drive train magnetically coupled to an external drive motor, a calibrated HPLC delivery system, a heated probe tip and means located adjacent the probe tip for direct ionization of the residue on the belt. The interface is also capable of being readily adapted to fit any mass spectrometer. 8 figs.

Andresen, B.D.; Fought, E.R.

1989-09-19T23:59:59.000Z

347

Reimagining liquid transportation fuels : sunshine to petrol.  

SciTech Connect (OSTI)

Two of the most daunting problems facing humankind in the twenty-first century are energy security and climate change. This report summarizes work accomplished towards addressing these problems through the execution of a Grand Challenge LDRD project (FY09-11). The vision of Sunshine to Petrol is captured in one deceptively simple chemical equation: Solar Energy + xCO{sub 2} + (x+1)H{sub 2}O {yields} C{sub x}H{sub 2x+2}(liquid fuel) + (1.5x+.5)O{sub 2} Practical implementation of this equation may seem far-fetched, since it effectively describes the use of solar energy to reverse combustion. However, it is also representative of the photosynthetic processes responsible for much of life on earth and, as such, summarizes the biomass approach to fuels production. It is our contention that an alternative approach, one that is not limited by efficiency of photosynthesis and more directly leads to a liquid fuel, is desirable. The development of a process that efficiently, cost effectively, and sustainably reenergizes thermodynamically spent feedstocks to create reactive fuel intermediates would be an unparalleled achievement and is the key challenge that must be surmounted to solve the intertwined problems of accelerating energy demand and climate change. We proposed that the direct thermochemical conversion of CO{sub 2} and H{sub 2}O to CO and H{sub 2}, which are the universal building blocks for synthetic fuels, serve as the basis for this revolutionary process. To realize this concept, we addressed complex chemical, materials science, and engineering problems associated with thermochemical heat engines and the crucial metal-oxide working-materials deployed therein. By project's end, we had demonstrated solar-driven conversion of CO{sub 2} to CO, a key energetic synthetic fuel intermediate, at 1.7% efficiency.

Johnson, Terry Alan (Sandia National Laboratories, Livermore, CA); Hogan, Roy E., Jr.; McDaniel, Anthony H. (Sandia National Laboratories, Livermore, CA); Siegel, Nathan Phillip; Dedrick, Daniel E. (Sandia National Laboratories, Livermore, CA); Stechel, Ellen Beth; Diver, Richard B., Jr.; Miller, James Edward; Allendorf, Mark D. (Sandia National Laboratories, Livermore, CA); Ambrosini, Andrea; Coker, Eric Nicholas; Staiger, Chad Lynn; Chen, Ken Shuang; Ermanoski, Ivan; Kellog, Gary L.

2012-01-01T23:59:59.000Z

348

LIQUID PROPANE GAS (LPG) STORAGE AREA BOILING LIQUID EXPANDING VAPOR EXPLOSION (BLEVE) ANALYSIS  

SciTech Connect (OSTI)

The PHA and the FHAs for the SWOC MDSA (HNF-14741) identified multiple accident scenarios in which vehicles powered by flammable gases (e.g., propane), or combustible or flammable liquids (e.g., gasoline, LPG) are involved in accidents that result in an unconfined vapor cloud explosion (UVCE) or in a boiling liquid expanding vapor explosion (BLEVE), respectively. These accident scenarios are binned in the Bridge document as FIR-9 scenarios. They are postulated to occur in any of the MDSA facilities. The LPG storage area will be in the southeast corner of CWC that is relatively remote from store distaged MAR. The location is approximately 30 feet south of MO-289 and 250 feet east of 2401-W by CWC Gate 10 in a large staging area for unused pallets and equipment.

PACE, M.E.

2004-01-13T23:59:59.000Z

349

Liquid-liquid equilibria of the ternary system water + acetic acid + 2-methyl-2-butanol  

SciTech Connect (OSTI)

Liquid-liquid equilibria for the ternary system water + acetic acid + 2-methyl-2-butanol were measured over a temperature range of (288 to 323) K. The results were used to estimate the interaction parameters between each of the three compounds for the NRTL and UNIQUAC models and between each of the main groups of H{sub 2}O, CH{sub 2} (paraffinic CH{sub 2}), OH, and COOH for the UJNIFAC model as a function of temperature. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the three models. The NRTL equation was the most accurate model in correlating the overall equilibrium compositions of the studied system. The UNIFAC model satisfactorily predicted the equilibrium compositions.

Fahim, M.A.; Al-Muhtaseb, S.A. [United Arab Emirates Univ., Al-Ain (United Arab Emirates). Dept. of Chemical and Petroleum Engineering] [United Arab Emirates Univ., Al-Ain (United Arab Emirates). Dept. of Chemical and Petroleum Engineering

1996-11-01T23:59:59.000Z

350

Liquid-liquid equilibria of the ternary system water + acetic acid + 1-hexanol  

SciTech Connect (OSTI)

The recovery of organic acids from dilute solutions resulting from fermentation processes is important and many solvents have been tried to improve such recovery. Liquid-liquid equilibria for the ternary system water + acetic acid + 1-hexanol were measured over a temperature range of (288 to 323) K. The results were used to estimate the interaction parameters between each of the three compounds for the NRTL and UNIQUAC models and between each of the main groups of H{sub 2}O, CH{sub 2} (paraffinic CH{sub 2}), OH, and COOH for the UNIFAC model as a function of temperature. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the three models. The NRTL equation was the most accurate model in correlating the overall equilibrium compositions of the studied system. The UNIQUAC and UNIFAC models satisfactorily predicted the equilibrium compositions.

Fahim, M.A. [Kuwait Univ., Safat (Kuwait). Dept. of Chemical Engineering] [Kuwait Univ., Safat (Kuwait). Dept. of Chemical Engineering; Al-Muhtaseb, S.A.; Al-Nashef, I.M. [U.A.E. Univ., Al-Ain (United Arab Emirates). Dept. of Chemical and Petroleum Engineering] [U.A.E. Univ., Al-Ain (United Arab Emirates). Dept. of Chemical and Petroleum Engineering

1997-01-01T23:59:59.000Z

351

Reduced graphene oxide based silver sulfide hybrid films formed at a liquid/liquid interface  

SciTech Connect (OSTI)

Free-standing, ultra-thin films of silver sulfide and reduced graphene oxide (RGO) based silver sulfide hybrids are prepared at a liquid/liquid interface employing in situ chemical reaction strategy. Ag{sub 2}S and RGO?Ag{sub 2}S hybrid films are characterized by various techniques such as UV-visible and photo luminescence spectroscopy, X-ray diffraction and scanning electron microscopy. The morphology of hybrid films consists of Ag{sub 2}S nanocrystals on RGO surface while Ag{sub 2}S films contains branched network of dendritic structures. RGO?Ag{sub 2}S exhibit interesting optical and electrical properties. The hybrid films absorb in the region 500650 nm and show emission in the red region. A higher conductance is observed for the hybrid films arising from the RGO component. This simple low cost method can be extended to prepare other RGO based metal sulfides.

Bramhaiah, K., E-mail: jsneena@csmr.res.in; John, Neena S., E-mail: jsneena@csmr.res.in [Centre for Soft Matter Research, P.B. No.1329, Jalahalli, Bangalore-560013 (India)

2014-04-24T23:59:59.000Z

352

In Situ Electron Energy Loss Spectroscopy in Liquids  

E-Print Network [OSTI]

In situ scanning transmission electron microscopy (STEM) through liquids is a promising approach for exploring biological and materials processes. However, options for in situ chemical identification are limited: X-ray analysis is precluded because the holder shadows the detector, and electron energy loss spectroscopy (EELS) is degraded by multiple scattering events in thick layers. Here, we explore the limits of EELS for studying chemical reactions in their native environments in real time and on the nanometer scale. The determination of the local electron density, optical gap and thickness of the liquid layer by valence EELS is demonstrated for liquids. By comparing theoretical and experimental plasmon energies, we find that liquids appear to follow the free-electron model that has been previously established for solids. Signals at energies below the optical gap and plasmon energy of the liquid provide a high signal-to-background ratio as demonstrated for LiFePO4 in aqueous solution. The potential for using...

Holtz, Megan E; Gao, Jie; Abrua, Hctor D; Muller, David A

2012-01-01T23:59:59.000Z

353

Numerical simulation of the Tayler instability in liquid metals  

E-Print Network [OSTI]

The electrical current through an incompressible, viscous and resistive liquid conductor produces an azimuthal magnetic field that becomes unstable when the corresponding Hartmann number exceeds a critical value in the order of 20. This Tayler instability, which is not only discussed as a key ingredient of a non-linear stellar dynamo model (Tayler-Spruit dynamo), but also as a limiting factor for the maximum size of large liquid metal batteries, was recently observed experimentally in a column of a liquid metal (Seilmayer et al., Phys. Rev. Lett. 108, 244501, 2012}. On the basis of an integro-differential equation approach, we have developed a fully three-dimensional numerical code, and have utilized it for the simulation of the Tayler instability at typical viscosities and resistivities of liquid metals. The resulting growth rates are in good agreement with the experimental data. We illustrate the capabilities of the code for the detailed simulation of liquid metal battery problems in realistic geometries.

Weber, Norbert; Stefani, Frank; Weier, Tom; Wondrak, Thomas

2012-01-01T23:59:59.000Z

354

Structural and electronic properties of dense liquid and amorphous nitrogen  

SciTech Connect (OSTI)

We present first-principles calculations of the structural and electronic properties of liquid nitrogen in the pressure-temperature range of 0-200 GPa and 2000-6000 K. The molecular-polymerization and molecular-atomic liquid phase boundaries have been mapped over this region. We find the polymeric liquid to be metallic, similar to what has been reported for the higher-temperature atomic fluid. An explanation of the electronic properties is given based on the structure and bonding character of the transformed liquids. We discuss the structural and bonding differences between the polymeric liquid and insulating solid cubic-gauche nitrogen to explain the differences in their electronic properties. Furthermore, we discuss the mechanism responsible for charge transport in polymeric nitrogen systems to explain the conductivity of the polymeric fluid and the semi-conducting nature of low-temperature amorphous nitrogen.

Boates, B; Bonev, S A

2011-02-11T23:59:59.000Z

355

Probing Liquid Surfaces under Vacuum Using SEM and TOF-SIMS....  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

beneath it. This window supports the liquid against the vacuum by the liquids surface tension, while limiting the high-density vapor region traversed by the probe beams...

356

Ionic liquid ion source emitter arrays fabricated on bulk porous substrates for spacecraft propulsion  

E-Print Network [OSTI]

Ionic Liquid Ion Sources (ILIS) are a subset of electrospray capable of producing bipolar beams of pure ions from ionic liquids. Ionic liquids are room temperature molten salts, characterized by negligible vapor pressures, ...

Courtney, Daniel George

2011-01-01T23:59:59.000Z

357

Effects of heat and mass transport on the hydrodynamics and stability of liquid desiccant films  

E-Print Network [OSTI]

5.8 Average liquid properties heat capacity, thermal5.9 Average liquid properties heat capacity, thermalFigure 5.8: Average liquid properties heat capacity, thermal

Pineda Vargas, Sergio Manuel

2013-01-01T23:59:59.000Z

358

E-Print Network 3.0 - argonne liquid-metal advanced Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

liquid-metal advanced Search Powered by Explorit Topic List Advanced Search Sample search results for: argonne liquid-metal advanced Page: << < 1 2 3 4 5 > >> 1 CONCAVE LIQUID...

359

The use of ionic liquid ion sources (ILIS) in FIB applications  

E-Print Network [OSTI]

A new monoenergetic, high-brightness ion source can be constructed using an arrangement similar to liquid metal ion sources (LMIS) by substituting the liquid metal with an ionic liquid, or room temperature molten salt. Ion ...

Zorzos, Anthony Nicholas

2009-01-01T23:59:59.000Z

360

Solvatochromic characterization of the liquid phase in liquid-supercritical CO{sub 2} mixtures  

SciTech Connect (OSTI)

The solvatochromic dye phenol blue (N,N-dimethylindoaniline) is used to characterize the solvent strength (polarity) of the saturated liquid phase in a series of solvent-carbon dioxide binary mixtures. Data were obtained at 35 and 55 C and at pressures up to {approximately}70 bar. Five solvents were investigated--acetone, cyclohexane, methanol, THF, and toluene. The polarity of the liquid phase decreases significantly with increasing pressure due to the increasing carbon dioxide content of this phase at equilibrium. For example, the polarity of acetone saturated with carbon dioxide at 35 C and {approximately}60 bar is equivalent to the polarity of pure cyclohexane at ambient pressure. The local environment about the dye is significantly richer in the polar liquid component than the bulk composition would indicate. The degree of enrichment reflects concentration effects at low pressure, and both concentration and pressure effects at high pressure where the mixtures are highly compressible. The NRTL model of Renon and Prausnitz is able to predict these local compositions with reasonable accuracy except at CO{sub 2}-rich conditions where compressibility effects are important.

Kelley, S.P.; Lemert, R.M. [Univ. of Toledo, OH (United States). Chemical Engineering Dept.] [Univ. of Toledo, OH (United States). Chemical Engineering Dept.

1996-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Solubilities and liquid phase nonidealities in coal liquids: Final report, July 30, 1984-July 30, 1987  

SciTech Connect (OSTI)

The research effort was a three year study of the solubilities of polynuclear aromatic hydrocarbons (PAH's) in organic solvents and the vapor-liquid equilibria of some of these same systems. Solubilities of 102 systems were determined as functions of temperature from ambient temperature to the melting point of the solute. The systems are listed and results are presented. Solubility data were analyzed using four solution models (Regular Solution theory, Extended Regular Solution theory, Wilson's Equation, and UNIQUAC) and binary interaction parameters have been obtained for the liquid phase. Also included are analyses of 35 more systems that have been previously published, for the purpose of composition of the predicted activity coefficients. Vapor pressures were determined for five solvents versus temperature. Also determined were the vapor-liquid equilibria for a test system and for six new systems at three temperatures each. New systems are (tetralin-decalin, tetralin-biphenyl, decalin- biphenyl, tetralin-fluorene, tetralin-fluorene, tetralin- dibenzothiophene, and tetralin-dibenzofuran. Results have been analyzed using four common solution models (Wilson's, UNIQUAC, NRTL, and Van Laar) and the optimum binary parameters determined. We have compared the parameters (for Wilson's and UNIQUAC) for the two methods and discussed the pros and cons of each method as a source for these parameters. Some initial steps have been made towards utilizing statistical mechanical methods for these types of systems. 46 refs., 26 figs., 57 tabs.

McLaughlin, E.; Coon, J.E.

1988-01-01T23:59:59.000Z

362

Liquid-liquid equilibria of water + methanol + 1-octanol and water + ethanol + 1-octanol at various temperatures  

SciTech Connect (OSTI)

This study is part of a wider program of research on the recovery of light alcohols from dilute aqueous solutions using high molecular weight solvents. The authors report liquid-liquid equilibrium data and binodal curves for the systems water + methanol + 1-octanol and water + ethanol + 1-octanol at 25, 35, and 45 C. The data were fitted to the NRTL and UNIQUAC equations.

Arce, A.; Blanco, A.; Souza, P.; Vidal, I. (Univ. of Santiago de Compostela (Spain). Dept. of Chemical Engineering)

1994-04-01T23:59:59.000Z

363

Liquid Crystals, 2002, Vol. 29, No. 10, 13211327 Synthesis and properties of azo dye aligning layers for liquid  

E-Print Network [OSTI]

Liquid Crystals, 2002, Vol. 29, No. 10, 1321­1327 Synthesis and properties of azo dye aligning) The synthesis and properties of azo dyes that can be used for photoaligning liquid crystals (LCs) have been investigated. The structures and the synthetic procedure for the azo dyes are presented. The photoaligning

364

Creaming and breaking of liquid emulsions: a free boundary problem 1 / 48 Creaming and breaking of liquid  

E-Print Network [OSTI]

, as opposite to the other case called instead a water-in-oil emulsion. #12;Creaming and breaking of liquid emulsions: a free boundary problem 4 / 48 What is an emulsion? Everyday life examples (a) water-in-oil of the model 5 A priori estimates 6 Existence and uniqueness #12;Creaming and breaking of liquid emulsions

Rosso, Fabio

365

Density-functional theory of freezing of quantum liquids at zero temperature using exact liquid-state linear response  

E-Print Network [OSTI]

Density-functional theory of freezing of quantum liquids at zero temperature using exact liquid the shortcomings of the currently popular density-functional approximate theories to describe 3d freezing distances. S0163-1829 97 04310-5 I. INTRODUCTION The modern density-functional theory DFT , which

Likos, Christos N.

366

THE JOURNAL OF CHEMICAL PHYSICS 140, 224502 (2014) Search for a liquid-liquid critical point in models of silica  

E-Print Network [OSTI]

from pure sil- ica are widely used by the telecommunications industry and, because silica and silicates in models of silica Erik Lascaris,1 Mahin Hemmati,2 Sergey V. Buldyrev,3 H. Eugene Stanley,1 and C. Austen indicated the possible existence of a liquid-liquid critical point (LLCP) in models of silica at high

Stanley, H. Eugene

367

Calculation of Vapor-Liquid-Liquid Equilibria for the Fischer-Tropsch Reactor Effluents using Modified Peng-Robinson  

E-Print Network [OSTI]

Calculation of Vapor-Liquid-Liquid Equilibria for the Fischer- Tropsch Reactor Effluents using ignored the non-ideal phase equilibrium problem of a FT reactor. The rigorous calculation method is based A modified Peng­Robinson equation of state is used to develop the methods for calculating the thermodynamic

Skogestad, Sigurd

368

Toward new solid and liquid phase systems for the containment, transport and delivery of hydrogen  

Broader source: Energy.gov [DOE]

Toward new solid and liquid phase systems for the containment, transport and delivery of hydrogen.Solid and liquid hydrogen carriers for use in hydrogen storage and delivery.

369

E-Print Network 3.0 - air liquide adds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

All Sizes (Cylinders to Liquid to Pipelines) Operations... ;4 Merchant Hydrogen Plants Praxair Liquid Hydrogen Plant Praxair Tube Trailer Hydrogen Plant ... Source: DOE Office of...

370

E-Print Network 3.0 - ammonium-based ionic liquids Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy 65 Use of polymerionic liquid plasticizers as gel electrolytes in electrochromic devices Summary: Use of polymerionic liquid plasticizers as gel electrolytes in...

371

E-Print Network 3.0 - alkylammonium ionic liquids Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy 99 Use of polymerionic liquid plasticizers as gel electrolytes in electrochromic devices Summary: Use of polymerionic liquid plasticizers as gel electrolytes in...

372

E-Print Network 3.0 - alkylimidazolium ionic liquids Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy 73 Use of polymerionic liquid plasticizers as gel electrolytes in electrochromic devices Summary: Use of polymerionic liquid plasticizers as gel electrolytes in...

373

E-Print Network 3.0 - aligned nematic liquid Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

pattern formation 1. INTRODUCTION... Nematic Liquid Crystals Under Nanosecond Laser Irradiation Svetlana G. Lukishova Nick Lepeshkin* Robert W... of planar-aligned liquid...

374

Gas Transport and Control in Thick-Liquid Inertial Fusion Power Plants  

E-Print Network [OSTI]

c v is the solid or liquid heat capacity at constant volume,heat capacities and might be slightly retrograde. Retrograde liquid-

Debonnel, Christophe Sylvain

2006-01-01T23:59:59.000Z

375

Strategies for Detecting Organic Liquids on Soils Using Mid-Infrared...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Strategies for Detecting Organic Liquids on Soils Using Mid-Infrared Reflection Spectroscopy . Strategies for Detecting Organic Liquids on Soils Using Mid-Infrared Reflection...

376

E-Print Network 3.0 - aux interfaces solide-liquide Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at the solid- liquid interface.2,3 The reason is the historical... diffusing, at the solid-liquid ... Source: Granick, Steve - Departments of Physics & Materials Science and...

377

E-Print Network 3.0 - alpha liquid scintillation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

may be organic and inorganic solids, liquids... .025 eV): all in ground state works as gas, liquid, solid 12;5 Organic scintillators: scintillation... scintillators...

378

E-Print Network 3.0 - acid liquid radioactive Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

processing liquids, electroplating solutions and radioactive tank wastes. A researcher works... solid and liquid radioactive samples. NMR research has been performed on nuclear...

379

E-Print Network 3.0 - acidic liquid water Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

liquid water Search Powered by Explorit Topic List Advanced Search Sample search results for: acidic liquid water Page: << < 1 2 3 4 5 > >> 1 Mallinckrodt Specialty Chemicals Co....

380

Manipulation of small liquid volumes with microfluidics for microanalysis and biological applications.  

E-Print Network [OSTI]

??Microfluidic devices hold much promise for small liquid volumes control due to their ability to manipulate small liquid volume from micorlitre to picolitre and easily (more)

Su, Jing

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Soft ionization of thermally evaporated hypergolic ionic liquid aerosols  

SciTech Connect (OSTI)

Isolated ion pairs of a conventional ionic liquid, 1-Ethyl-3-Methyl-Imidazolium Bis(trifluoromethylsulfonyl)imide ([Emim+][Tf2N?]), and a reactive hypergolic ionic liquid, 1- Butyl-3-Methyl-Imidazolium Dicyanamide ([Bmim+][Dca?]), are generated by vaporizing ionic liquid submicron aerosol particles for the first time; the vaporized species are investigated by dissociative ionization with tunable vacuum ultraviolet (VUV) light, exhibiting clear intact cations, Emim+ and Bmim+, presumably originating from intact ion pairs. Mass spectra of ion pair vapor from an effusive source of the hypergolic ionic liquid show substantial reactive decomposition due to the internal energy of the molecules emanating from the source. Photoionization efficiency curves in the near threshold ionization region of isolated ion pairs of [Emim+][Tf2N?] ionic liquid vapor are compared for an aerosol source and an effusive source, revealing changes in the appearance energy due to the amount of internal energy in the ion pairs. The aerosol source has a shift to higher threshold energy (~;;0.3 eV), attributed to reduced internal energy of the isolated ion pairs. The method of ionic liquid submicron aerosol particle vaporization, for reactive ionic liquids such as hypergolic species, is a convenient, thermally ?cooler? source of isolated intact ion pairs in the gas phase compared to effusive sources.

University of California; ERC, Incorporated, Edwards Air Force Base; Air Force Research Laboratory, Edwards Air Force Base; National Synchrotron Radiation Research Center (NSRRC); Koh, Christine J.; Liu, Chen-Lin; Harmon, Christopher W.; Strasser, Daniel; Golan, Amir; Kostko, Oleg; Chambreau, Steven D.; L.Vaghjiani, Ghanshyam; Leone, Stephen R.

2012-03-16T23:59:59.000Z

382

A High Temperature Liquid Plasma Model of the Sun  

E-Print Network [OSTI]

In this work, a liquid model of the Sun is presented wherein the entire solar mass is viewed as a high density/high energy plasma. This model challenges our current understanding of the densities associated with the internal layers of the Sun, advocating a relatively constant density, almost independent of radial position. The incompressible nature of liquids is advanced to prevent solar collapse from gravitational forces. The liquid plasma model of the Sun is a non-equilibrium approach, where nuclear reactions are free to occur throughout the solar mass. The primary means of addressing internal heat transfer are convection and conduction. As a result of the convective processes on the solar surface, the liquid model brings into question the established temperature of the solar photosphere by highlighting a violation of Kirchhoff's law of thermal emission. Along these lines, the model emphasizes that radiative emission is a surface phenomenon. Strong evidence is provided that the Sun is a high density/high energy liquid plasma. This evidence is based on our knowledge of Planckian thermal emission and condensed matter, including the existence of pressure ionization and liquid metallic hydrogen at high temperatures and pressures. The equations of magnetohydrodynamics are invoked as the proper vehicle for the understanding od stellar convection and structure. Prior to introducing the liquid plasma model, the historic and scientific justifications for the gaseous model of the Sun are reviewed and the gaseous equations of state are also discussed.

Pierre-Marie Robitaille

2004-10-04T23:59:59.000Z

383

Liquid xenon detectors for particle physics and astrophysics  

SciTech Connect (OSTI)

This article reviews the progress made over the last 20 years in the development and applications of liquid xenon detectors in particle physics, astrophysics, and medical imaging experiments. A summary of the fundamental properties of liquid xenon as radiation detection medium, in light of the most current theoretical and experimental information is first provided. After an introduction of the different type of liquid xenon detectors, a review of past, current, and future experiments using liquid xenon to search for rare processes and to image radiation in space and in medicine is given. Each application is introduced with a survey of the underlying scientific motivation and experimental requirements before reviewing the basic characteristics and expected performance of each experiment. Within this decade it appears likely that large volume liquid xenon detectors operated in different modes will contribute to answering some of the most fundamental questions in particle physics, astrophysics, and cosmology, fulfilling the most demanding detection challenges. From detectors based solely on liquid xenon (LXe) scintillation, such as in the MEG experiment for the search of the rare ''{mu}{yields}e{gamma}'' decay, currently the largest liquid xenon detector in operation, and in the XMASS experiment for dark matter detection, to the class of time projection chambers which exploit both scintillation and ionization of LXe, such as in the XENON dark matter search experiment and in the Enriched Xenon Observatory for neutrinoless double beta decay, unrivaled performance and important contributions to physics in the next few years are anticipated.

Aprile, E.; Doke, T. [Department of Physics, Columbia University, New York, New York 10027 (United States); Advanced Research Institute for Science and Engineering, Waseda University, Tokyo 169-8555 (Japan)

2010-07-15T23:59:59.000Z

384

X-rays at Solid-Liquid Surfaces  

SciTech Connect (OSTI)

Solid-liquid interfaces play an important role in many areas of current and future technologies, and in our biosphere. They play a key role in the development of nanofluidics and nanotribology, which sensitively depend on our knowledge of the microscopic structures and phenomena at the solid-liquid interface. The detailed understanding of how a fluid meets a wall is also a theoretical challenge. In particular, the phenomena at repulsive walls are of interest, since they affect many different phenomena, such as water-repellent surfaces or the role of the hydrophobic interaction in protein folding. Recent x-ray reflectivity studies of various solid-liquid interfaces have disclosed rather intriguiing phenomena, which will be discussed in this lecture: premelting of ice in contact with silica; liquid Pb in contact with Si; water in contact with hydrophobic surfaces. These experiments, carried out with high-energy x-ray microbeams, reveal detailed insight into the liquid density profile closest to the wall. A detailed insight into atomistic phenomena at solid-liquid interfaces is also a prerequisite in the microscopic control of electrochemical reactions at interfaces. Recent x-ray studies show the enormous future potential of such non-destructive analytical tools for the in situ observation of (electro-)chemical surface reactions. This lecture will review recent x-ray experiments on solid-liquid interfaces.

Dosch, Helmut (Max Planck Institute for Metals Research) [Max Planck Institute for Metals Research

2007-05-02T23:59:59.000Z

385

Enzymantic Conversion of Coal to Liquid Fuels  

SciTech Connect (OSTI)

The work in this project focused on the conversion of bituminous coal to liquid hydrocarbons. The major steps in this process include mechanical pretreatment, chemical pretreatment, and finally solubilization and conversion of coal to liquid hydrocarbons. Two different types of mechanical pretreatment were considered for the process: hammer mill grinding and jet mill grinding. After research and experimentation, it was decided to use jet mill grinding, which allows for coal to be ground down to particle sizes of 5 {mu}m or less. A Fluid Energy Model 0101 JET-O-MIZER-630 size reduction mill was purchased for this purpose. This machine was completed and final testing was performed on the machine at the Fluid Energy facilities in Telford, PA. The test results from the machine show that it can indeed perform to the required specifications and is able to grind coal down to a mean particle size that is ideal for experimentation. Solubilization and conversion experiments were performed on various pretreated coal samples using 3 different approaches: (1) enzymatic - using extracellular Laccase and Manganese Peroxidase (MnP), (2) chemical - using Ammonium Tartrate and Manganese Peroxidase, and (3) enzymatic - using the live organisms Phanerochaete chrysosporium. Spectral analysis was used to determine how effective each of these methods were in decomposing bituminous coal. After analysis of the results and other considerations, such as cost and environmental impacts, it was determined that the enzymatic approaches, as opposed to the chemical approaches using chelators, were more effective in decomposing coal. The results from the laccase/MnP experiments and Phanerochaete chrysosporium experiments are presented and compared in this final report. Spectra from both enzymatic methods show absorption peaks in the 240nm to 300nm region. These peaks correspond to aromatic intermediates formed when breaking down the coal structure. The peaks then decrease in absorbance over time, corresponding to the consumption of aromatic intermediates as they undergo ring cleavage. The results show that this process happens within 1 hour when using extracellular enzymes, but takes several days when using live organisms. In addition, live organisms require specific culture conditions, control of contaminants and fungicides in order to effectively produce extracellular enzymes that degrade coal. Therefore, when comparing the two enzymatic methods, results show that the process of using extracellular lignin degrading enzymes, such as laccase and manganese peroxidase, appears to be a more efficient method of decomposing bituminous coal.

Richard Troiano

2011-01-31T23:59:59.000Z

386

A Xenon Condenser with a Remote Liquid Storage Vessel  

E-Print Network [OSTI]

We describe the design and operation of a system for xenon liquefaction in which the condenser is separated from the liquid storage vessel. The condenser is cooled by a pulse tube cryocooler, while the vessel is cooled only by the liquid xenon itself. This arrangement facilitates liquid particle detector research by allowing easy access to the upper and lower flanges of the vessel. We find that an external xenon gas pump is useful for increasing the rate at which cooling power is delivered to the vessel, and we present measurements of the power and efficiency of the apparatus.

S. Slutsky; Y. -R. Yen; H. Breuer; A. Dobi; C. Hall; T. Langford; D. S. Leonard; L. J. Kaufman; V. Strickland; N. Voskanian

2009-07-25T23:59:59.000Z

387

Ultrasonic liquid-in-line detector for tubes  

DOE Patents [OSTI]

An apparatus and method for detecting the presence of liquid in pipes or tubes using ultrasonic techniques A first piezoelectric crystal is coupled to the outside of the pipe or tube at the location where liquid in the tube is to be detected. A second piezoelectric crystal is coupled to the outside of the pipe or tube at the same location along the tube but circumferentially displaced from the first crystal by an angle around the pipe or tube of less than 180.degree.. Liquid in the pipe or tube is detected by measuring the attenuation of an ultrasonic signal sent by the first piezoelectric crystal and received by the second piezoelectric crystal.

Piper, Thomas C. (Idaho Falls, ID)

1991-01-01T23:59:59.000Z

388

Notes 06. Liquid cavitation in fluid film bearings  

E-Print Network [OSTI]

[s] U ?R. Journal surface speed [m/s] V dh/dt. Squeeze film velocity [m/s] X= ?R, y, z Coordinate system on plane of bearing ? ()/ cav ?? . Density ratio ? P ? ? ? ? . Liquid bulk-modulus [N/m 2 ] ? Liquid density [kg/m 3 ] cav... ? Density at Pcav [kg/m 3 ] ? Fluid absolute viscosity [N.s/m 2 ] ? Journal angular speed (rad/s) Subscripts * Inception of the cavitation zone a Ambient value cav Cavitation NOTES 6. CAVITATION IN LIQUID FILM BEARINGS. Dr. Luis San Andr?s ? 2009...

San Andres, Luis

2009-01-01T23:59:59.000Z

389

Process for blending coal with water immiscible liquid  

DOE Patents [OSTI]

A continuous process for blending coal with a water immiscible liquid produces a uniform, pumpable slurry. Pulverized raw feed coal and preferably a coal derived, water immiscible liquid are continuously fed to a blending zone (12 and 18) in which coal particles and liquid are intimately admixed and advanced in substantially plug flow to form a first slurry. The first slurry is withdrawn from the blending zone (12 and 18) and fed to a mixing zone (24) where it is mixed with a hot slurry to form the pumpable slurry. A portion of the pumpable slurry is continuously recycled to the blending zone (12 and 18) for mixing with the feed coal.

Heavin, Leonard J. (Olympia, WA); King, Edward E. (Gig Harbor, WA); Milliron, Dennis L. (Lacey, WA)

1982-10-26T23:59:59.000Z

390

Energy landscape of a simple model for strong liquids  

E-Print Network [OSTI]

We calculate the statistical properties of the energy landscape of a minimal model for strong network-forming liquids. Dynamics and thermodynamic properties of this model can be computed with arbitrary precision even at low temperatures. A degenerate disordered ground state and logarithmic statistics for the energy distribution are the landscape signatures of strong liquid behavior. Differences from fragile liquid properties are attributed to the presence of a discrete energy scale, provided by the particle bonds, and to the intrinsic degeneracy of topologically disordered networks.

A. J. Moreno; S. V. Buldyrev; E. La Nave; I. Saika-Voivod; F. Sciortino; P. Tartaglia; E. Zaccarelli

2005-10-04T23:59:59.000Z

391

Kinetics and Solvent Effects in the Synthesis of Ionic Liquids  

E-Print Network [OSTI]

in diesel fuel 19 and extractants in the recovery of ethanol and butanol for biofuel applications. 20 1.1. IL Background ILs have shown versatility in many fields of research and applications, so the question is what are ILs, and what makes ILs so... with ionic liquids. Chem. Commun. 2001, 2494-2495. 20. Fadeev, A. G.; Meagher, M. M., Opportunities for ionic liquids in recovery of biofuels. Chem. Commun. 2001, 295-296. 21. Lancaster, L., Organic reactivity in ionic liquids: some mechanistic insights...

Schleicher, Jay C.

2007-12-12T23:59:59.000Z

392

Detection of free liquid in containers of solidified radioactive waste  

DOE Patents [OSTI]

A method of nondestructively detecting the presence of free liquid within a sealed enclosure containing solidified waste by measuring the levels of waste at two diametrically opposite locations while slowly tilting the enclosure toward one of said locations. When the measured level remains constant at the other location, the measured level at said one location is noted and any measured difference of levels indicates the presence of liquid on the surface of the solidified waste. The absence of liquid in the enclosure is verified when the measured levels at both locations are equal.

Greenhalgh, Wilbur O. (Richland, WA)

1985-01-01T23:59:59.000Z

393

Electron Liquids in Semiconductor Quantum Structures  

SciTech Connect (OSTI)

The groups led by Stormer and Pinczuk have focused this project on goals that seek the elucidation of novel many-particle effects that emerge in two-dimensional electron systems (2DES) as the result from fundamental quantum interactions. This experimental research is conducted under extreme conditions of temperature and magnetic field. From the materials point of view, the ultra-high mobility systems in GaAs/AlGaAs quantum structures continue to be at the forefront of this research. The newcomer materials are based on graphene, a single atomic layer of graphite. The graphene research is attracting enormous attention from many communities involved in condensed matter research. The investigated many-particle phenomena include the integer and fractional quantum Hall effect, composite fermions, and Dirac fermions, and a diverse group of electron solid and liquid crystal phases. The Stormer group performed magneto-transport experiments and far-infrared spectroscopy, while the Pinczuk group explores manifestations of such phases in optical spectra.

Aron Pinczuk

2009-05-25T23:59:59.000Z

394

Electrohydrodynamic instabilities in thin liquid trilayer films  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Experiments by Dickey et al. [Langmuir, 22, 4315 (2006)] and Leach et al. [Chaos, 15, 047506 (2005)] show that novel pillar shapes can be generated from electrohydrodynamic instabilities at the interfaces of thin polymer/polymer/air trilayer films. In this paper, we use linear stability analysis to investigate the effect of free charge and ac electric fields on the stability of trilayer systems. Our work is also motivated by our recent theoretical study [J. Fluid Mech., 631, 255 (2009)] which demonstrates how ac electric fields can be used to increase control over the pillar formation process in thin liquid bilayer films. For perfect dielectric films, the effect of an AC electric field can be understood by considering an equivalent DC field. Leaky dielectric films yield pillar configurations that are drastically different from perfect dielectric films, and AC fields can be used to control the location of free charge within the trilayer system. This can alter the pillar instability modes and generate smaller diameter pillars when conductivities are mismatched. The results presented here may be of interest for the creation of complex topographical patterns on polymer coatings and in microelectronics.

Roberts, Scott A. [Sandia National Lab., Albuquerque, NM (United States); Kumar, Satish [Univ. of Minnesota, Minneapolis, MN (United States)

2010-09-12T23:59:59.000Z

395

Liquid cooled, linear focus solar cell receiver  

DOE Patents [OSTI]

Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

Kirpich, Aaron S. (Broomall, PA)

1985-01-01T23:59:59.000Z

396

Liquid cooled, linear focus solar cell receiver  

DOE Patents [OSTI]

Separate structures for electrical insulation and thermal conduction are established within a liquid cooled, linear focus solar cell receiver for use with parabolic or Fresnel optical concentrators. The receiver includes a V-shaped aluminum extrusion having a pair of outer faces each formed with a channel receiving a string of solar cells in thermal contact with the extrusion. Each cell string is attached to a continuous glass cover secured within the channel with spring clips to isolate the string from the external environment. Repair or replacement of solar cells is effected simply by detaching the spring clips to remove the cover/cell assembly without interrupting circulation of coolant fluid through the receiver. The lower surface of the channel in thermal contact with the cells of the string is anodized to establish a suitable standoff voltage capability between the cells and the extrusion. Primary electrical insulation is provided by a dielectric tape disposed between the coolant tube and extrusion. Adjacent solar cells are soldered to interconnect members designed to accommodate thermal expansion and mismatches. The coolant tube is clamped into the extrusion channel with a releasably attachable clamping strip to facilitate easy removal of the receiver from the coolant circuit.

Kirpich, A.S.

1983-12-08T23:59:59.000Z

397

Infrared curing simulations of liquid composites molding  

SciTech Connect (OSTI)

Infrared radiation is an effective energy source to cure thermosetting polymers. Its usage is expected to reduce curing time in comparison with thermal heating and mold thermally regulated. In addition, because of the polymerization mechanism and instant on-off control of this power, an improvement in the final properties of the material is also expected. In this paper, we studied the infrared interaction with carbon (or glass) fibers reinforced epoxy matrix, where Liquid resin infusion (LRI) is used to manufacture the composite. Temperature of the composite is a key parameter that affects its mechanical properties and is controlled by the infrared emitters and the exothermic heat released from the polymerization. Radiative heat flux is computed using the in-lab developed software RAYHEAT. Then, the heat flux (or absorbed energy for glass fibers) is exported to the finite element based program COMSOLMULTIPHYSICS where heat balance equation is solved. This equation is coupled with the exothermic heat released during the curing process in order to predict the composite temperature versus time and degree of cure. Numerical simulations will be performed on planar parts (sheet shape) as well as curvilinear shapes. Experimental validations of the infrared curing carbon (glass)-epoxy composite system are presented in this paper Sheet surface temperature distribution are measured thanks to infrared camera. Kinetic parameters were estimated from differential scanning calorimeter (DSC) experimental data.

Nakouzi, S.; Pancrace, J.; Schmidt, F. M.; Le Maoult, Y.; Berthet, F. [Universite de Toulouse (France); INSA, UPS, Mines Albi, ISAE, ICA - Institut Clement Ader, Campus Jarlard, F-81013 Albi cedex 09 (France); Ecole des Mines Albi, Campus Jarlard, F-81013 Albi (France)

2011-05-04T23:59:59.000Z

398

Smectic Liquid Crystals in Random Environments  

E-Print Network [OSTI]

We study smectic liquid crystals in random environments, e.g., aerogel. A low temperature analysis reveals that even arbitrarily weak quenched disorder (i.e., arbitrarily low aerogel density) destroys translational (smectic) order. A harmonic approximation to the elastic energy suggests that there is no ``smectic Bragg glass'' phase in this system: even at zero temperature, it is riddled with dislocation loops induced by the quenched disorder. This result implies the destruction of orientational (nematic) order as well, and that the thermodynamically sharp Nematic-Smectic-A transition is destroyed by disorder, in agreement with recent experimental results. We also show that the anharmonic elastic terms neglected in the above treatment are important (i.e., are ``relevant'' in the renormalization group sense); whether they alter the above conclusions about the smectic Bragg glass, orientational disorder, and the existence of sharp transitions, remains an open question. However, they do not alter our conclusion that translational (smectic) order is always destroyed. In contrast, we expect that weak annealed disorder should have no qualitative effects on the smectic order.

Leo Radzihovsky; John Toner

1999-06-04T23:59:59.000Z

399

Colloidal liquids of yolk-shell particles  

E-Print Network [OSTI]

In this paper we develop statistical mechanical tools to describe the intermediate- and long-time collective- and self-diffusion properties of a liquid of strongly-interacting hollow spherical particles (shells), each bearing a smaller solid sphere (yolk) in its interior. To decouple two complex effects we assume that the hydrodynamic interactions can be accounted for through the effective short-time self-diffusion coefficients $D^0_s$ and $D^0_y$ that describe the short-time Brownian motion of the yolk and the shell particles, and develop a self-consistent generalized Langevin equation theory to describe the intermediate- and long-time effects of the direct shell-shell, yolk-shell and yolk-yolk interactions. In a concrete application, we consider the simplest yolk-shell model system involving purely repulsive hard-body interactions between all (shell and yolk) particles. Using a softened version of these interparticle potentials we perform Brownian dynamics simulations to determine the mean squared displacement of both types of particles, as well as the intermediate scattering function of the yolk-shell complex. We compare the theoretical and simulation results between them, and with the results for the same system in the absence of yolks. We find that the yolks, which have no effect on the shell-shell static structure, influences the dynamic properties in a predictable manner, fully captured by the theory.

L. E. Sanchez Diaz; E. C. Cortes-Morales; X. Li; Wei-Ren Chen; M. Medina-Noyola

2014-07-23T23:59:59.000Z

400

NMR STUDIES OF LIQUID CRYSTALS AND MOLECULES DISSOLVED IN LIQUID CRYSTAL SOLVENTS  

SciTech Connect (OSTI)

This thesis describes several studies in which nuclear magnetic resonance (nmr) spectroscopy has been used to probe the structure, orientation and dynamics of liquid crystal mesogens and molecules dissolved in liquid crystalline phases. In addition, a modern high field nmr spectrometer is described which has been used to perform such nmr studies. Chapter 1 introduces the quantum mechanical formalisms used throughout this thesis and briefly reviews the fundamentals of nuclear spin physics and pulsed nmr spectroscopy. First the density operator is described and a specific form for the canonical ensemble is derived. Then Clebsch-Gordon coefficients, Wigner rotation matrices, and irreducible tensor operators are reviewed. An expression for the equilibrium (Curie) magnetization is obtained and the linear response of a spin system to a strong pulsed r.f. irradiation is described. Finally, the spin interaction Hamiltonians relevant to this work are reviewed together with their truncated forms. Chapter 2 is a deuterium magnetic resonance study of two 'nom' liquid crystals which possess several low temperature mesomorphic phases. Specifically, deuterium quadrupolar echo spectroscopy is used to determine the orientation of the liquid crystal molecules in smectic phases, the changes in molecular orientation and motion that occur at smectic-smectic phase transitions, and the order of the phase transitions. For both compounds, the phase sequence is determined to be isotropic, nematic, smectic A, smectic C, smectic B{sub A}, smectic B{sub C}, and crystalline. The structure of the smectic A phase is found to be consistent with the well-known model of a two dimensional liquid in which molecules are rapidly rotating about their long axes and oriented at right angles to the plane of the layers. Molecules in the smectic C phase are found to have their long axes tilted with respect to the layer normal, and the tilt angle is temperature dependent, increasing from zero at the smectic A - smectic C transition and reaching a maximum at 9{sup o} at the smectic C - smectic B{sub A} transition. This finding contradicts the results of X-ray diffraction studies which indicate that the tilt angle is 18{sup o} and temperature independent. The smectic B{sub A} - smectic B{sub C} phase transition is observed for the first time, and is found to be first order, a result that contradicts the prediction of a mean theory by McMillian. Chapter 3 is a multiple quantum nmr study of n-hexane oriented in a nematic liquid crystal solvent. The basic three pulse multiple quantum experiment is discussed which enables the observation of transitions for which |{Delta}m|>1, and then the technique of the separation of multiple quantum orders by phase incrementation in the multiple quantum evolution period is reviewed (TPPI). An explicit example of multiple quantum nmr is given by the calculation of the multiple quantum spectrum of an oriented methyl group.

Drobny, G.P.

1982-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Solid-liquid composite structures: elastic beams with embedded liquid-filled parallel-channel networks  

E-Print Network [OSTI]

Deformation due to embedded fluidic networks is currently studied in the context of soft-actuators and soft-robotics. Expanding on this concept, beams can be designed so that the pressure in the channel-network is created directly from external forces acting on the beam, and thus can be viewed as passive solid-liquid composite structure. We obtain a continuous function relating the network geometry to the deformation. This enables design of networks creating arbitrary steady and time varying deformation-fields as well as to eliminate deformation created by external forces.

Yoav Matia; Amir Gat

2014-09-07T23:59:59.000Z

402

Fermi-liquid droplets in liquid-solid solutions of the helium isotopes  

SciTech Connect (OSTI)

For temperatures below phase separation of 1000-ppm /sup 3/He in solid /sup 4/He we measure a heat capacity ..gamma..T for a pressure between melting of pure /sup 3/He and /sup 4/He. Together with the confined sample geometry this results in liquid /sup 3/He droplets (phiapprox.10/sup 3/A) either dilute or pure depending on the phase diagram topology which is discussed theoretically. In the case of a pure /sup 3/He droplet we find an anomalously high effective mass m*/m=10, which could be explained by paramagnon effects enhanced by the confined geometry.

Hebral, B.; Greenberg, A.S.; Beal-Monod, M.T.; Papoular, M.; Frossati, G.; Godfrin, H.; Thoulouze, D.

1981-01-05T23:59:59.000Z

403

Vapor-liquid equilibria of coal-derived liquids; 3: Binary systems with tetralin at 200 mmHg  

SciTech Connect (OSTI)

Isobaric vapor-liquid equilibrium data are reported for binary systems of tetralin with p-xylene, [gamma]-picoline, piperidine, and pyridine; all systems were measured at 26.66 kPa (200 mmHg) with a recirculation still. Liquid-phase activity coefficients were correlated using the Van Laar, Wilson, NRTL, and UNIQUAC equations. Vapor-phase nonidealities were found negligible under the experimental conditions of this work, and deviations of the liquid phase from the ideal behavior, as described by Raoult's law, were found to be slightly positive for all the systems.

Blanco, B.; Beltran, S.; Cabezas, J.L. (University Coll., Burgos (Spain). Dept. of Chemical Engineering); Coca, J. (Univ. of Oviedo (Spain). Dept. of Chemical Engineering)

1994-01-01T23:59:59.000Z

404

Dehydrogenation of liquid fuel in microchannel catalytic reactor  

DOE Patents [OSTI]

The present invention is an improved process for the storage and delivery of hydrogen by the reversible hydrogenation/dehydrogenation of an organic compound wherein the organic compound is initially in its hydrogenated state. The improvement in the route to generating hydrogen is in the dehydrogenation step and recovery of the dehydrogenated organic compound resides in the following steps: introducing a hydrogenated organic compound to a microchannel reactor incorporating a dehydrogenation catalyst; effecting dehydrogenation of said hydrogenated organic compound under conditions whereby said hydrogenated organic compound is present as a liquid phase; generating a reaction product comprised of a liquid phase dehydrogenated organic compound and gaseous hydrogen; separating the liquid phase dehydrogenated organic compound from gaseous hydrogen; and, recovering the hydrogen and liquid phase dehydrogenated organic compound.

Toseland, Bernard Allen (Coopersburg, PA); Pez, Guido Peter (Allentown, PA); Puri, Pushpinder Singh (Emmaus, PA)

2010-08-03T23:59:59.000Z

405

Nanoparticles at liquid interfaces: Rotational dynamics and angular locking  

SciTech Connect (OSTI)

Nanoparticles with different surface morphologies that straddle the interface between two immiscible liquids are studied via molecular dynamics simulations. The methodology employed allows us to compute the interfacial free energy at different angular orientations of the nanoparticle. Due to their atomistic nature, the studied nanoparticles present both microscale and macroscale geometrical features and cannot be accurately modeled as a perfectly smooth body (e.g., spheres and cylinders). Under certain physical conditions, microscale features can produce free energy barriers that are much larger than the thermal energy of the surrounding media. The presence of these energy barriers can effectively lock the particle at specific angular orientations with respect to the liquid-liquid interface. This work provides new insights on the rotational dynamics of Brownian particles at liquid interfaces and suggests possible strategies to exploit the effects of microscale features with given geometric characteristics.

Razavi, Sepideh; Kretzschmar, Ilona [Department of Chemical Engineering, City College of City University of New York, New York, New York 10031 (United States)] [Department of Chemical Engineering, City College of City University of New York, New York, New York 10031 (United States); Koplik, Joel [Department of Physics and The Benjamin Levich Institute for Physico-chemical Hydrodynamics, City College of City University of New York, New York, New York 10031 (United States)] [Department of Physics and The Benjamin Levich Institute for Physico-chemical Hydrodynamics, City College of City University of New York, New York, New York 10031 (United States); Colosqui, Carlos E., E-mail: carlos.colosqui@stonybrook.edu [Department of Mechanical Engineering, Stony Brook University, Stony Brook, New York 11794 (United States)

2014-01-07T23:59:59.000Z

406

Municipal Solid Waste (MSW) to Liquid Fuels Synthesis, Volume...  

Energy Savers [EERE]

Synthesis, Volume 2: A Techno-economic Evaluation of the Production of Mixed Alcohols Biomass is a renewable energy resource that can be converted into liquid fuel suitable for...

407

Refining and End Use Study of Coal Liquids.  

SciTech Connect (OSTI)

Progress in a study to determine the most cost effective and suitable combination of existing petroleum refinery processes needed to make specification transportation fuels or blending stocks, from direct and indirect coal liquefaction product liquids is reported.

NONE

1997-12-31T23:59:59.000Z

408

a Newtonian liquid surface Matthew Thrasher, Sunghwan Jung,  

E-Print Network [OSTI]

a lubricating layer air. Figure 2 shows rebound nearly vertical small velocities and becomes more oblique larger into a mineral oil. 1 1 Thrasher, S. Y. Pang, C.­P. Chuu, Swinney, bouncing Newtonian liquid rebounding surface

Texas at Austin. University of

409

Liquid metal batteries : ambipolar electrolysis and alkaline earth electroalloying cells  

E-Print Network [OSTI]

Three novel forms of liquid metal batteries were conceived, studied, and operated, and their suitability for grid-scale energy storage applications was evaluated. A ZnlITe ambipolar electrolysis cell comprising ZnTe dissolved ...

Bradwell, David (David Johnathon)

2011-01-01T23:59:59.000Z

410

LIQUID PHASE SINTERING OF IRON WITH COPPER BASE ALLOY POWDERS  

E-Print Network [OSTI]

Symposium on Powder Metallurgy - The Iron and Steel Inst.a Liquid Phase", Powder Metallurgy, 17 (33), 227 (1974). H.Other made by powder metallurgy techniques. ses to produce

Chen, M.-H.

2010-01-01T23:59:59.000Z

411

Spectroscopic investigations of hydrogen bond dynamics in liquid water  

E-Print Network [OSTI]

Many of the remarkable physical and chemical properties of liquid water are due to the strong influence hydrogen bonds have on its microscopic dynamics. However, because of the fast timescales involved, there are relatively ...

Fecko, Christopher J., 1975-

2004-01-01T23:59:59.000Z

412

acid liquid membrane: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bulk solutions of polyelectrolyte bounded by semipermeable membranes and separated by a thin film of salt-free liquid. Although the membranes are neutral, the counter-ions of the...

413

Temperature-dependent structural heterogeneity in calcium silicate liquids.  

SciTech Connect (OSTI)

X-ray diffraction measurements performed on aerodynamically levitated CaSiO{sub 3} droplets have been interpreted using a structurally heterogeneous liquid-state model. When cooled, the high-temperature liquid shows evidence of the polymerization of edge shared Ca octahedra. Diffraction isosbestic points are used to characterize the polymerization process in the pair-distribution function. This behavior is linear in the high-temperature melt but exhibits rapid growth just above the glass transition temperature around 1.2T{sub g}. The heterogeneous liquid interpretation is supported by molecular-dynamics simulations which show the CaSiO{sub 3} glass has more edge-shared polyhedra and fewer corner shared polyhedra than the liquid model.

Benmore, C. J.; Weber, J. K. R.; Wilding, M. C.; Du, J.; Parise, J. B. (X-Ray Science Division); (Materials Development Inc.); (Aberystwyth Univ.); (State Univ. of New York at Stony Brook); (Univ. of North Texas)

2010-12-07T23:59:59.000Z

414

Tribological Properties of Ionic Liquids Lubricants Containing Nanoparticles  

E-Print Network [OSTI]

Recently, there has been an increase in research in the application of ionic liquids containing nanoparticles as lubricants due to their properties such as thermally stability, non-volatility and non-flammability. The purpose of this thesis...

Lu, Wei

2014-05-14T23:59:59.000Z

415

Enhancing cholesteric liquid crystal laser performance using a cholesteric reflector  

E-Print Network [OSTI]

laser based on a free- standing film of photo polymerized cholesteric liquid crystal," Appl. Phys. Lett as an optic fiber-based temperature sensor," Appl. Phys. Lett. 85, 2691-2693 (2004). 15. Y. Huang, Y. Zhou

Wu, Shin-Tson

416

Molecular Dynamics Modeling of Ionic Liquids in Electrospray Propulsion  

E-Print Network [OSTI]

. Lozano June 2010 SSL # 6-10 #12;#12;Molecular Dynamics Modeling of Ionic Liquids in Electrospray Propulsion Nanako Takahashi, Paulo C. Lozano June 2010 SSL # 6-10 This work is based on the unaltered text

417

Heat transfer during film condensation of a liquid metal vapor  

E-Print Network [OSTI]

The object of this investigation is to resolve the discrepancy between theory and experiment for the case of heat transfer durirnfilm condensation of liquid metal vapors. Experiments by previous investigators have yielded ...

Sukhatme, S. P.

1964-01-01T23:59:59.000Z

418

Tunable-focus liquid lens controlled using a servo motor  

E-Print Network [OSTI]

operation, this liquid lens has potential applications in zoom lenses, auto beam steering, and eyeglasses lenses are useful for auto beam steering, cell phone cameras, eyeglasses, and other optical signal

Wu, Shin-Tson

419

Boiling and condensation in a liquid-filled enclosure  

E-Print Network [OSTI]

A combined experimental and analytical investigation of boiling and condensation in a liquid-filled enclosure, with water and Freon- 113 as the working fluids, is described. The operating characteristics of a boiling system, ...

Bar-Cohen Avram

1971-01-01T23:59:59.000Z

420

Designing liquid repellent surfaces for fabrics, feathers and fog  

E-Print Network [OSTI]

Omniphobicity refers to a property of surfaces which are not wetted by water, oils, alcohols and other low surface tension liquids. Robust omniphobic surfaces can be applied in many areas including fabrics with chemical / ...

Chhatre, Shreerang S. (Shreerang Sharad)

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Carbon Nanotube-Reinforced Thermotropic Liquid Crystal Polymer Nanocomposites  

E-Print Network [OSTI]

This paper focuses on the fabrication via simple melt blending of thermotropic liquid crystal polyester (TLCP) nanocomposites reinforced with a very small quantity of modified carbon nanotube (CNT) and the unique effects ...

Kim, Jun Young

422

Design of biomimetic compliant devices for locomotion in liquid environments  

E-Print Network [OSTI]

Presently, there is a need for devices capable of autonomous locomotion in liquid environments. Humanitarian, industrial and defense applications are numerous and include examples such as search and rescue missions, ocean ...

Valdivia y Alvarado, Pablo (Pablo Alvaro), 1977-

2007-01-01T23:59:59.000Z

423

Photodegradation mechanisms of tetraphenyl butadiene coatings for liquid argon detectors  

E-Print Network [OSTI]

We report on studies of degradation mechanisms of tetraphenyl butadiene (TPB) coatings of the type used in neutrino and dark matter liquid argon experiments. Using gas chromatography coupled to mass spectrometry we have ...

Jones, Benjamin James Poyner

424

Nuclear tanker producing liquid fuels from air and water  

E-Print Network [OSTI]

Emerging technologies in CO? air capture, high temperature electrolysis, microchannel catalytic conversion, and Generation IV reactor plant systems have the potential to create a shipboard liquid fuel production system ...

Galle-Bishop, John Michael

2011-01-01T23:59:59.000Z

425

Technology available for license: Charging of liquid energy storage...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology available for license: Charging of liquid energy storage media through radiolysis (ANL-IN-14-036) January 23, 2015 Tweet EmailPrint This technology utilizes radiolysis...

426

Keer electro-optic measurements in liquid dielectrics  

E-Print Network [OSTI]

Kerr electro-optic technique has been used to measure the electric field distribution in high voltage stressed dielectric liquids, where the difference between refractive indices for light polarized parallel and perpendicular ...

Zhang, Xuewei

2014-01-01T23:59:59.000Z

427

Ultrafast photo-acoustic spectroscopy of super-cooled liquids  

E-Print Network [OSTI]

Picosecond laser ultrasonic techniques for acoustic wave generation and detection were adapted to probe longitudinal and transverse acoustic waves in liquids at gigahertz frequencies. The experimental effort was designed ...

Klieber, Christoph

2010-01-01T23:59:59.000Z

428

Molecular Dynamics Simulations of Heat Transfer In Nanoscale Liquid Films  

E-Print Network [OSTI]

is almost a constant for ??f /? parabolic temperature profiles in the domain with temperature jumps due to the Kapitza resistance at the liquid/solid interfaces. Using the energy dissipation rates predicted by MD simulations...

Kim, Bo Hung

2010-07-14T23:59:59.000Z

429

Surface Crystallization in a Liquid AuSi Alloy  

SciTech Connect (OSTI)

X-ray measurements reveal a crystalline monolayer at the surface of the eutectic liquid Au{sub 82}Si{sub 18}, at temperatures above the alloy's melting point. Surface-induced atomic layering, the hallmark of liquid metals, is also found below the crystalline monolayer. The layering depth, however, is threefold greater than that of all liquid metals studied to date. The crystallinity of the surface monolayer is notable, considering that AuSi does not form stable bulk crystalline phases at any concentration and temperature and that no crystalline surface phase has been detected thus far in any pure liquid metal or nondilute alloy. These results are discussed in relation to recently suggested models of amorphous alloys.

Shpyrko,O.; Streitel, R.; Balagurusamy, V.; Grigoriev, A.; Deutsch, M.; Ocko, B.; Meron, M.; Lin, B.; Pershan, P.

2006-01-01T23:59:59.000Z

430

Shear and Extensional Rheology of Cellulose/Ionic Liquid Solutions  

E-Print Network [OSTI]

In this study, we characterize the shear and extensional rheology of dilute to semidilute solutions of cellulose in the ionic liquid 1-ethyl-3-methylimidazolium acetate (EMIAc). In steady shear flow, the semidilute solutions ...

Haward, Simon J.

431

The mathematical modeling of a Tuned Liquid Damper  

E-Print Network [OSTI]

The goal of this research is the simplification of the mathematical modeling process of a Tuned Liquid Damper. In an environment of increasingly flexible and lightly damped structures, the suppression of structural vibrations is an important topic...

Tokarczyk, Bryan Lee

1997-01-01T23:59:59.000Z

432

Transfer Lines to Connect Liquid Waste Facilities and Salt Waste...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

far will integrate SWPF with current liquid waste facilities, such as the DWPF and the tanks farms." EM is pleased with the spirit of integration. "A key objective for us over the...

433

Savannah River Site's Liquid Waste Operations Adds Multi-Functional...  

Office of Environmental Management (EM)

now been filled. The SDUs play an essential role in the closure of the 45 liquid waste tanks on the site. About 90 percent of the waste in these tanks is salt waste that must be...

434

NUMERICAL SIMULATION OF RESERVOIR COMPACTION IN LIQUID DOMINATED GEOTHERMAL SYSTEMS  

E-Print Network [OSTI]

13. modeling of liquid geothermal systems: Ph.D. thesis,of water dominated geothermal fields with large temper~of land subsidence in geothermal areas: Proc. 2nd Int. Symp.

Lippmann, M.J.

2010-01-01T23:59:59.000Z

435

The radiation chemistry of ionic liquids: a review  

SciTech Connect (OSTI)

Ionic liquids have received increasing attention as media for radiochemical separations. Recent literature includes examinations of the efficiencies and mechanisms of the solvent extraction of lanthanides, actinides and fission products into ionic liquid solutions. For radiochemical applications, including as replacement solvents for nuclear fuel reprocessing, a thorough understanding of the radiation chemistry of ionic liquids will be required. Such an understanding can be achieved based upon a combination of steady-state radiolysis experiments coupled with post-irradiation product identification and pulse-radiolysis experiments to acquire kinetic information. These techniques allow for the elucidation of radiolytic mechanisms. This contribution reviews the current ionic liquid radiation chemistry literature as it affects separations, with these considerations in mind.

Bruce J. Mincher; James F. Wishart

2014-07-01T23:59:59.000Z

436

Spinon-phonon interaction in algebraic spin liquids  

E-Print Network [OSTI]

Motivated by a search for experimental probes to access the physics of fractionalized excitations called spinons in spin liquids, we study the interaction of spinons with lattice vibrations. We consider the case of algebraic ...

Serbyn, Maksym

437

Investigation of the organic matter in inactive nuclear tank liquids  

SciTech Connect (OSTI)

Environmental Protection Agency (EPA) methodology for regulatory organics fails to account for the organic matter that is suggested by total organic carbon (TOC) analysis in the Oak Ridge National Laboratory (ORNL) inactive nuclear waste-tank liquids and sludges. Identification and measurement of the total organics are needed to select appropriate waste treatment technologies. An initial investigation was made of the nature of the organics in several waste-tank liquids. This report details the analysis of ORNL wastes.

Schenley, R.L.; Griest, W.H.

1990-08-01T23:59:59.000Z

438

High-Throughput Mode Liquid Microjunction Surface Sampling Probe  

SciTech Connect (OSTI)

A simple and automated spot sampling operation mode for a liquid microjunction surface sampling probe/electrospray ionization mass spectrometry (LMJ-SSP/ESI-MS) system is reported. Prior manual and automated spot sampling methods with this probe relied on a careful, relatively slow alignment of the probe and surface distance (<20 m spacing) to form the probe-to-surface liquid microjunction critical to successful surface sampling. Moreover, sampling multiple spots required retraction of the surface from the probe and a repeat of this careful probe-to-surface distance alignment at the next sampling position. With the method described here, the probe was not positioned as close to the surface, the exact probeto-surface positioning was found to be less critical (spanning distances from about 100-300 m), and this distance was not altered during the sampling of an entire array of sample spots. With the probe positioned within the appropriate distance from the surface, the liquid microjunction was formed by letting the liquid from the sampling end of the probe extend out from the probe to the surface. This was accomplished by reducing the selfaspiration liquid flow rate of the probe to a value less than the volume flow rate pumped into the probe. When the self-aspiration rate of the probe was subsequently increased, analytes on the surface that dissolved at the liquid microjunction were aspirated back into the probe with the liquid that created the liquid microjunction and electrosprayed. Presented here are the basics of this new sampling mode, as well as data that illustrate the potential analytical capabilities of the device to conduct highthroughput quantitative analysis.

Van Berkel, Gary J [ORNL; Kertesz, Vilmos [ORNL; King, Richard C. [PharmaCadence

2009-01-01T23:59:59.000Z

439

Membrane contactor assisted extraction/reaction process employing ionic liquids  

DOE Patents [OSTI]

The present invention relates to a functionalized membrane contactor extraction/reaction system and method for extracting target species from multi-phase solutions utilizing ionic liquids. One preferred embodiment of the invented method and system relates to an extraction/reaction system wherein the ionic liquid extraction solutions act as both extraction solutions and reaction mediums, and allow simultaneous separation/reactions not possible with prior art technology.

Lin, Yupo J. (Naperville, IL); Snyder, Seth W. (Lincolnwood, IL)

2012-02-07T23:59:59.000Z

440

Retrograde Melting and Internal Liquid Gettering in Silicon  

SciTech Connect (OSTI)

Retrograde melting (melting upon cooling) is observed in silicon doped with 3d transition metals, via synchrotron-based temperature-dependent X-ray microprobe measurements. Liquid metal-silicon droplets formed via retrograde melting act as efficient sinks for metal impurities dissolved within the silicon matrix. Cooling results in decomposition of the homogeneous liquid phase into solid multiple-metal alloy precipitates. These phenomena represent a novel pathway for engineering impurities in semiconductor-based systems.

Hudelson, Steve; Newman, Bonna K.; Bernardis, Sarah; Fenning, David P.; Bertoni, Mariana I.; Marcus, Matthew A.; Fakra, Sirine C.; Lai, Barry; Buonassisi, Tonio

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Liquid-phase compositions from vapor-phase analyses  

SciTech Connect (OSTI)

Arsenic normally is not considered to be a contaminant. However, because arsenic was found in many cylinders of UF{sub 6}, including in corrosion products, a study was performed of the distribution of the two arsenic fluorides, AsF{sub 3} and AsF{sub 5}, between liquid and vapor phases. The results of the study pertain to condensation or vaporization of liquid UF{sub 6}. This study includes use of various experimental data plus many extrapolations necessitated by the meagerness of the experimental data. The results of this study provide additional support for the vapor-liquid equilibrium model of J.M. Prausnitz and his coworkers as a means of describing the distribution of various impurities between vapor and liquid phases of UF{sub 6}. Thus, it is concluded that AsF{sub 3} will tend to concentrate in the liquid phase but that the concentration of AsF{sub 5} in the vapor phase will exceed its liquid-phase concentration by a factor of about 7.5, which is in agreement with experimental data. Because the weight of the liquid phase in a condensation operation may be in the range of thousands of times that of the vapor phase, most of any AsF{sub 5} will be in the liquid phase in spite of this separation factor of 7.5. It may also be concluded that any arsenic fluorides fed into a uranium isotope separation plant will either travel with other low-molecular-weight gases or react with materials present in the plant. 25 refs., 3 figs., 6 tabs.

Davis, W. Jr. (Oak Ridge Gaseous Diffusion Plant, TN (USA)); Cochran, H.D. (Oak Ridge National Lab., TN (USA))

1990-02-01T23:59:59.000Z

442

Kelvin Helmholtz Instability in Strongly Coupled Yukawa Liquids  

SciTech Connect (OSTI)

Using 'first principles' molecular dynamics simulations Kelvin Helmholtz instability has been observed for the first time at the particle level in two-dimensional strongly coupled Yukawa liquids. At a given coupling strength {Gamma} a subsonic shear profile is superposed on an equilibrated Yukawa liquid and instability is observed. Linear growth rates computed directly from MD simulations are seen to increase with strong coupling. Vortex-roll formation in the nonlinear regime is reported.

Ashwin, J.; Ganesh, R. [Institute For Plasma Research, Bhat, Gandhinagar-382428 (India)

2010-05-28T23:59:59.000Z

443

VAPOR SPACE AND LIQUID/AIR INTERFACECORROSION TESTS  

SciTech Connect (OSTI)

The phenomena of vapor space corrosion and liquid/air interface corrosion of carbon steel in simulated liquid waste environments have been investigated. Initial experiments have explored the hypothesis that vapor space corrosion may be accelerated by the formation of a corrosive electrolyte on the tank wall by a process of evaporation of relatively warmer waste and condensation of the vapor on the relatively cooler tank wall. Results from initial testing do not support the hypothesis of electrolyte transport by evaporation and condensation. The analysis of the condensate collected by a steel specimen suspended over a 40 C simulated waste solution showed no measurable concentrations of the constituents of the simulated solution and a decrease in pH from 14 in the simulant to 5.3 in the condensate. Liquid/air interface corrosion was studied as a galvanic corrosion system, where steel at the interface undergoes accelerated corrosion while steel in contact with bulk waste is protected. The zero-resistance-ammeter technique was used to measure the current flow between steel specimens immersed in solutions simulating (1) the high-pH bulk liquid waste and (2) the expected low-pH meniscus liquid at the liquid/air interface. Open-circuit potential measurements of the steel specimens were not significantly different in the two solutions, with the result that (1) no consistent galvanic current flow occurred and (2) both the meniscus specimen and bulk specimen were subject to pitting corrosion.

Zapp, P.; Hoffman, E.

2009-11-09T23:59:59.000Z

444

A rotating suspended liquid film as an electric generator  

E-Print Network [OSTI]

We have observed that a rotating liquid film generates electricity when a large external electric field is applied in the plane of the film. In our experiment suspended liquid film (soap film) is formed on a circular frame positioned horizontally on a rotating motor. This devise is located at the center of two capacitor-like vertical plates to apply external electric field in X-direction.The produced electric energy is piked up by two brushes in Y-direction of the suspended liquid film. We previously reported that a liquid film in an external electric field rotates when an electric current passes through it, naming it the liquid film motor (LFM). In this letter we report that the same system can be used as an electric generator, converting the rotating mechanical energy to an electric energy. The liquid film electric generator (LFEG) is in stark contrast to the LFM, both of which could be designed in very small scales like micro scales applicable in lab on a chip. The device is comparable to commercial DC ele...

Amjadi, Ahmad; Namin, Reza Montazeri

2013-01-01T23:59:59.000Z

445

Photorefractivity in polymer-stabilized nematic liquid crystals  

SciTech Connect (OSTI)

Polymer-stabilized liquid crystals, consisting of low concentrations of a polymeric electron acceptor, are shown to exhibit significantly enhanced photorefractive properties. The charge generation and transport properties of these composite systems are strongly modified from nematic liquid crystals doped with electron donors and acceptors. The new composites are produced by polymerizing a small quantity of a 1,4:5,8-naphthalenediimide electron acceptor functionalized with an acrylate group in an aligned nematic liquid crystal. Photopolymerization creates an anisotropic gel-like medium in which the liquid crystal is free to reorient in the presence of a space charge field, while maintaining charge trapping sites in the polymerized regions of the material. The presence of these trapping sites results in the observation of longer lived, higher resolution holographic gratings in the polymer-stabilized liquid crystals than observed in nematic liquid crystals alone. These gratings display Bragg regime diffraction. Asymmetric beam coupling, photo-conductivity, and four-wave mixing experiments are performed to characterize the photophysics of these novel materials.

Wiederrecht, G.P. [Argonne National Lab., IL (United States). Chemistry Div.; Wasielewski, M.R. [Argonne National Lab., IL (United States). Chemistry Div.]|[Northwestern Univ., Evanston, IL (United States). Dept. of Chemistry

1998-07-01T23:59:59.000Z

446

Apparatus and method for comparing corresponding acoustic resonances in liquids  

DOE Patents [OSTI]

Apparatus and method for comparing corresponding acoustic resonances in liquids. The present invention permits the measurement of certain characteristics of liquids which affect the speed of sound therein. For example, a direct correlation between the octane rating of gasoline and the speed of sound in a gasoline sample has been experimentally observed. Therefore, changes in the speed of sound therein can be utilized as a sensitive parameter for determining changes in composition of a liquid sample. The present apparatus establishes interference patterns inside of a liquid without requiring the use of very thin, rigorously parallel ceramic discs, but rather uses readily available piezoelectric transducers attached to the outside surface of the usual container for the liquid and located on the same side thereof in the vicinity of one another. That is, various receptacle geometries may be employed, and the driving and receiving transducers may be located on the same side of the receptacle. The cell may also be constructed of any material that is inert to the liquid under investigation. A single-transducer embodiment, where the same transducer provides the excitation to the sample container and receives signals impressed therein, is also described.

Sinha, Dipen N. (Los Almos, NM)

1999-01-01T23:59:59.000Z

447

Apparatus and method for comparing corresponding acoustic resonances in liquids  

DOE Patents [OSTI]

Apparatus and method are disclosed for comparing corresponding acoustic resonances in liquids. The present invention permits the measurement of certain characteristics of liquids which affect the speed of sound therein. For example, a direct correlation between the octane rating of gasoline and the speed of sound in a gasoline sample has been experimentally observed. Therefore, changes in the speed of sound therein can be utilized as a sensitive parameter for determining changes in composition of a liquid sample. The present apparatus establishes interference patterns inside of a liquid without requiring the use of very thin, rigorously parallel ceramic discs, but rather uses readily available piezoelectric transducers attached to the outside surface of the usual container for the liquid and located on the same side thereof in the vicinity of one another. That is, various receptacle geometries may be employed, and the driving and receiving transducers may be located on the same side of the receptacle. The cell may also be constructed of any material that is inert to the liquid under investigation. A single-transducer embodiment, where the same transducer provides the excitation to the sample container and receives signals impressed therein, is also described. 5 figs.

Sinha, D.N.

1999-03-23T23:59:59.000Z

448

Apparatus for detecting the presence of a liquid  

DOE Patents [OSTI]

This invention is comprised of an apparatus for detecting the presence of a liquid in a region, including an electrically passive sensor adapted for contacting the liquid, and an electrically active detector. The sensor is a circuit with a pair of spaced-apart terminals connected to a switch that closes in the presence of the liquid. The detector carries an alternating current with a resonant frequency. When the sensor is placed in a region and liquid is present, the circuit of the sensor is closed. By bringing the detector close to the sensor, an alternating current is induced in the sensor that will, in turn, alter the resonant frequency of the detector. This change is signaled by a transducer. The switch can operate by a change in conductivity of a material between the terminals of the sensor or by expansion of a liquid absorber that pushes the two terminals together, or by a change in the conductivity of the space between the terminals as a result of the liquid. The detector generates an audible or visible signal, or both, in response to the current change.

Kronberg, J.W.

1993-01-01T23:59:59.000Z

449

Study of EOS-G{sup ex} mixing rules for liquid-liquid equilibria  

SciTech Connect (OSTI)

The performance of two Gibbs free-energy-based equation-of-state (EOS) mixing rules is tested for the correlation and prediction of liquid-liquid equilibria (LLE). The LLE of ten binary mixtures were examined using the Peng-Robinson EOS combined with the Wong-Sandler and MHV1 mixing rules with two excess free-energy models (NRTL and UNIQUAC). Good agreement with low-pressure experimental data was obtained for nonassociating and self-associating mixtures using temperature-independent parameters. However, in the case of aqueous mixtures that exhibit both a lower and an upper critical solution temperature, it was necessary to use temperature-dependent parameters, as is also true when activity coefficient models are used directly to describe such systems. The Wong-Sandler mixing rule was capable of predicting the high-pressure phase behavior of the systems studied using parameters from correlation of only low-pressure LLE data, while the MHV1 model required the introduction of a binary interaction parameter. Consequently, the MHV1 model was useful for the correlation, but not for the prediction of high-pressure LLE from low-pressure data.

Escobedo-Alvarado, G.N.; Sandler, S.I. [Univ. of Delaware, Newark, DE (United States)] [Univ. of Delaware, Newark, DE (United States)

1998-05-01T23:59:59.000Z

450

Influence of geometry on liquid oxygen magnetohydrodynamics  

SciTech Connect (OSTI)

Magnetic fluid actuators have performed well in industrial applications, but have a limited temperature range due to the freezing point of the carrier fluid. Liquid oxygen (LOX) presents a pure, paramagnetic fluid suitable for use in a cryogenic magnetic fluid system; therefore, it is a potential solution to increasing the thermal range of magnetic fluid technology without the need for magnetic particles. The current study presents experimental work regarding the influence of geometry on the dynamics of a LOX slug in a 1.9 mm quartz tube when pulsed by a solenoid in a closed volume. A numerical analysis calculated the optimal solenoid geometry and balanced the magnetic, damping, and pressure forces to determine optimal slug lengths. Three configurations comprised the experiment: (1) a 24-gauge wire solenoid with an optimized 2.7 cm length slug, (2) a 30-gauge wire solenoid with an optimized 1.3 cm length slug, and (3) a 30-gauge wire solenoid with a nonoptimized 2.5 cm length slug. Typically, the hydrodynamic breakdown limit is calculated and used to determine the system range; however the experiment showed that the hydrodynamic breakdown limit was never reached by the slug. This implied that, instead, the system range should factor in a probabilistic risk of failure calculated as a function of the induced pressure change from its oscillations. The experimental data were also used to establish a nondimensional relationship between the maximum displacement and initial magnetic pressure on the slug. The average initial velocity of the slug was found to be proportional to the initial magnetic pressure, Mason number, and slug length. The results of this study can be used in the design and optimization of a LOX fluid system for space or low-temperature applications. (author)

Boulware, Jeffrey C.; Ban, Heng [Department of Mechanical and Aerospace Engineering, Utah State University, 4130 Old Main Hill, Logan, UT 84322-4130 (United States); Jensen, Scott; Wassom, Steve [Space Dynamics Laboratory, Utah State University Research Foundation, 1695 North Research Park Way, North Logan, UT 84341 (United States)

2010-11-15T23:59:59.000Z

451

ARM: Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microwave Radiometer data (MWR Profiles - QME), water vapor, temp, cloud liquid water, precip water retrievals

Cadeddu, Maria

452

LIQUID CRYSTAL THERMOGRAPHY ON THE FLUID SOLID INTERFACE OF ROTATING SYSTEMS  

E-Print Network [OSTI]

= Aluminum c = centrifugal lc = liquid crystal o = aerodynamic wall friction related p = at constant pressu

Camci, Cengiz

453

Variable-focus liquid lens Hongwen Ren and Shin-Tson Wu  

E-Print Network [OSTI]

. Introduction Variable focus liquid lenses are attractive for cellular phone, camera, eyeglasses, and other

Wu, Shin-Tson

454

1. Theory for Liquid Heat Capacity I ) Polynomial equation (HC_CPLEQN)  

E-Print Network [OSTI]

1. Theory for Liquid Heat Capacity I ) Polynomial equation (HC_CPLEQN) Polynomial equation is usedJ/kg-mol.K. II ) Corresponding States Method for Liquid Heat Capacity (HC_CPLCSP) The expression basedGraw-Hill, New York, 2000 2. KDB Routines for Liquid Heat Capacity Calculation KDB liquid heat capacity

Hong, Deog Ki

455

Fumigation with the Liquid Fumigants Carbon Tetrachloride, Ethylene Dichloride and Ethylene Dibromide  

E-Print Network [OSTI]

Fumigation with the Liquid Fumigants Carbon Tetrachloride, Ethylene Dichloride and Ethylene Dibromide...

Anonymous

1966-01-01T23:59:59.000Z

456

Interaction of a Liquid Gallium Jet with ISTTOK Edge Plasmas  

SciTech Connect (OSTI)

The use of liquid metals as plasma facing components in tokamaks has recently experienced a renewed interest stimulated by their advantages in the development of a fusion reactor. Liquid metals have been proposed to solve problems related to the erosion and neutronic activation of solid walls submitted to high power loads allowing an efficient heat exhaust from fusion devices. Presently the most promising candidate materials are lithium and gallium. However, lithium has a short liquid state range when compared, for example, with gallium that has essentially better thermal properties and lower vapor pressure. To explore further these properties, ISTTOK tokamak is being used to test the interaction of a free flying, fully formed liquid gallium jet with the plasma. The interacting, 2.3 mm diameter, jet is generated by hydrostatic pressure and has a 2.5 m/s flow velocity. The liquid metal injector has been build to allow the positioning of the jet inside the tokamak chamber, within a 13 mm range. This paper presents the first obtained experimental results concerning the liquid gallium jet-plasma interaction. A stable jet has been obtained, which was not noticeably affected by the magnetic field transients. ISTTOK has been successfully operated with the gallium jet without degradation of the discharge or a significant plasma contamination by liquid metal. This observation is supported by spectroscopic measurements showing that gallium radiation is limited to the region around the jet. Furthermore, the power deposited on the jet has been evaluated at different radial locations and the surface temperature increase estimated.

Gomes, R. B.; Fernandes, H.; Silva, C.; Pereira, T.; Figueiredo, J.; Carvalho, B.; Soares, A.; Duarte, P.; Varandas, C. [Associacao EURATOM/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, 1049-001 Lisboa, Porugal (Portugal); Sarakovskis, A.; Lielausis, O.; Klyukin, A.; Platacis, E.; Tale, I. [Association EURATOM/University of Latvia, Institute of Solid State Physics, 8 Kengaraga Str., LV-1063 Riga (Latvia)

2008-04-07T23:59:59.000Z

457

Study of Magnetohydrodynamic Surface Waves on Liquid Gallium  

SciTech Connect (OSTI)

Magnetohydrodynamic (MHD) surface waves on liquid gallium are studied theoretically and experimentally in the small magnetic Reynolds number limit. A linear dispersion relation is derived when a horizontal magnetic field and a horizontal electric current is imposed. No wave damping is found in the shallow liquid limit while waves always damp in the deep liquid limit with a magnetic field parallel to the propagation direction. When the magnetic field is weak, waves are weakly damped and the real part of the dispersion is unaffected, while in the opposite limit waves are strongly damped with shortened wavelengths. In a table-top experiment, planar MHD surface waves on liquid gallium are studied in detail in the regime of weak magnetic field and deep liquid. A non-invasive diagnostic accurately measures surface waves at multiple locations by reflecting an array of lasers off the surface onto a screen, which is recorded by an Intensified-CCD camera. The measured dispersion relation is consistent with the linear theory with a reduced surface tension likely due to surface oxidation. In excellent agreement with linear theory, it is observed that surface waves are damped only when a horizontal magnetic field is imposed parallel to the propagation direction. No damping is observed under a perpendicular magnetic field. The existence of strong wave damping even without magnetic field suggests the importance of the surface oxide layer. Implications to the liquid metal wall concept in fusion reactors, especially on the wave damping and a Rayleigh-Taylor instability when the Lorentz force is used to support liquid metal layer against gravity, are discussed.

Hantao Ji; William Fox; David Pace; H.L. Rappaport

2004-05-13T23:59:59.000Z

458

An improved model for the transit entropy of monatomic liquids  

SciTech Connect (OSTI)

In the original formulation of V-T theory for monatomic liquid dynamics, the transit contribution to entropy was taken to be a universal constant, calibrated to the constant-volume entropy of melting. This model suffers two deficiencies: (a) it does not account for experimental entropy differences of {+-}2% among elemental liquids, and (b) it implies a value of zero for the transit contribution to internal energy. The purpose of this paper is to correct these deficiencies. To this end, the V-T equation for entropy is fitted to an overall accuracy of {+-}0.1% to the available experimental high temperature entropy data for elemental liquids. The theory contains two nuclear motion contributions: (a) the dominant vibrational contribution S{sub vib}(T/{theta}{sub 0}), where T is temperature and {theta}{sub 0} is the vibrational characteristic temperature, and (b) the transit contribution S{sub tr}(T/{theta}{sub tr}), where {theta}{sub tr} is a scaling temperature for each liquid. The appearance of a common functional form of S{sub tr} for all the liquids studied is a property of the experimental data, when analyzed via the V-T formula. The resulting S{sub tr} implies the correct transit contribution to internal energy. The theoretical entropy of melting is derived, in a single formula applying to normal and anomalous melting alike. An ab initio calculation of {theta}{sub 0}, based on density functional theory, is reported for liquid Na and Cu. Comparison of these calculations with the above analysis of experimental entropy data provides verification of V-T theory. In view of the present results, techniques currently being applied in ab initio simulations of liquid properties can be employed to advantage in the further testing and development of V-T theory.

Wallace, Duane C [Los Alamos National Laboratory; Chisolm, Eric D [Los Alamos National Laboratory; Bock, Nicolas [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

459

Direct Liquid Cooling for Electronic Equipment  

SciTech Connect (OSTI)

This report documents a demonstration of an electronic--equipment cooling system in the engineering prototype development stage that can be applied in data centers. The technology provides cooling by bringing a water--based cooling fluid into direct contact with high--heat--generating electronic components. This direct cooling system improves overall data center energy efficiency in three ways: High--heat--generating electronic components are more efficiently cooled directly using water, capturing a large portion of the total electronic equipment heat generated. This captured heat reduces the load on the less--efficient air--based data center room cooling systems. The combination contributes to the overall savings. The power consumption of the electronic equipment internal fans is significantly reduced when equipped with this cooling system. The temperature of the cooling water supplied to the direct cooling system can be much higher than that commonly provided by facility chilled water loops, and therefore can be produced with lower cooling infrastructure energy consumption and possibly compressor-free cooling. Providing opportunities for heat reuse is an additional benefit of this technology. The cooling system can be controlled to produce high return water temperatures while providing adequate component cooling. The demonstration was conducted in a data center located at Lawrence Berkeley National Laboratory in Berkeley, California. Thirty--eight servers equipped with the liquid cooling system and instrumented for energy measurements were placed in a single rack. Two unmodified servers of the same configuration, located in an adjacent rack, were used to provide a baseline. The demonstration characterized the fraction of heat removed by the direct cooling technology, quantified the energy savings for a number of cooling infrastructure scenarios, and provided information that could be used to investigate heat reuse opportunities. Thermal measurement data were used with data center energy use modeling software to estimate overall site energy use. These estimates show that an overall data center energy savings of approximately 20 percent can be expected if a center is retrofitted as specified in the models used. Increasing the portion of heat captured by this technology is an area suggested for further development.

Coles, Henry; Greenberg, Steve

2014-03-01T23:59:59.000Z

460

Modeling of Plasma-Assisted Conversion of Liquid Ethanol into Hydrogen Enriched Syngas in the Nonequilibrium Electric Discharge Plasma-Liquid System  

E-Print Network [OSTI]

In this work we report recent results of our experimental and theoretical studies related to plasma conversion of liquid ethanol into hydrogen-enriched syngas in the plasma-liquid system with the electric discharge in a gas channel with liquid wall using available diagnostics and numerical modeling.

Levko, Dmitry; Naumov, Vadim; Chernyak, Valery; Yukhymenko, Vitaly; Prysiazhnevych, Irina; Olszewski, Sergey

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

XXIII ICTAM, 19-24 August 2012, Beijing, China Study of liquid destabilization and stripping in a liquid-gas mixing layer  

E-Print Network [OSTI]

in a liquid-gas mixing layer Jean-Philippe Matasa) , Sylvain Marty & Alain Cartellier LEGI, CNRS-Université de of the liquid sheet and the conditions of drop creation. The inviscid stability analysis of the system the flapping instability of a round liquid jet. Our injector is composed of two parallel channels: The channel

Boyer, Edmond

462

Electrical detection of liquid lithium leaks from pipe joints  

SciTech Connect (OSTI)

A test stand for flowing liquid lithium is under construction at Princeton Plasma Physics Laboratory. As liquid lithium reacts with atmospheric gases and water, an electrical interlock system for detecting leaks and safely shutting down the apparatus has been constructed. A defense in depth strategy is taken to minimize the risk and impact of potential leaks. Each demountable joint is diagnosed with a cylindrical copper shell electrically isolated from the loop. By monitoring the electrical resistance between the pipe and the copper shell, a leak of (conductive) liquid lithium can be detected. Any resistance of less than 2 k? trips a relay, shutting off power to the heaters and pump. The system has been successfully tested with liquid gallium as a surrogate liquid metal. The circuit features an extensible number of channels to allow for future expansion of the loop. To ease diagnosis of faults, the status of each channel is shown with an analog front panel LED, and monitored and logged digitally by LabVIEW.

Schwartz, J. A., E-mail: jschwart@pppl.gov; Jaworski, M. A.; Mehl, J.; Kaita, R.; Mozulay, R. [Princeton Plasma Physics Laboratory, Princeton, New Jersey 08543-0451 (United States)

2014-11-15T23:59:59.000Z

463

Novel Fluctuations at a Constrained Liquid-Solid Interface  

E-Print Network [OSTI]

We study the interface between a solid trapped within a bath of liquid by a suitably shaped non-uniform external potential. Such a potential may be constructed using lasers, external electric or magnetic fields or a surface template. We study a two dimensional case where a thin strip of solid, created in this way, is surrounded on either side by a bath of liquid with which it can easily exchange particles. Since height fluctuations of the interface cost energy, this interface is constrained to remain flat at all length scales. However, when such a solid is stressed by altering the depth of the potential; beyond a certain limit, it responds by relieving stress by novel interfacial fluctuations which involve addition or deletion of entire lattice layers of the crystal. This ``layering'' transition is a generic feature of the system regardless of the details of the interaction potential. We show how such interfacial fluctuations influence mass, momentum and energy transport across the interface. Tiny momentum impulses produce weak shock waves which travel through the interface and cause the spallation of crystal layers into the liquid. Kinetic and energetic constraints prevent spallation of partial layers from the crystal, a fact which may be of some practical use. We also study heat transport through the liquid-solid interface and obtain the resistances in liquid, solid and interfacial regions (Kapitza resistance) as the solid undergoes such layering transitions. Heat conduction, which shows strong signatures of the structural transformations, can be understood using a free volume calculation.

Abhishek Chaudhuri; Debasish Chaudhuri; Surajit Sengupta

2007-03-19T23:59:59.000Z

464

Existing data on the 216-Z liquid waste sites  

SciTech Connect (OSTI)

During 36 years of operation at the Hanford Site, the ground has been used for disposal of liquid and solid transuranic and/or low-level wastes. Liquid waste was disposed in surface and subsurface cribs, trenches, French drains, reverse wells, ditches and ponds. Disposal structures associated with Z Plant received liquid waste from plutonium finishing and reclamation, waste treatment and laboratory operations. The nineteen 216-Z sites have received 83% of the plutonium discharged to 325 liquid waste facilities at the Hanford Site. The purpose of this document is to support the Hanford Defense Waste Environmental Impact Statement by drawing the existing data together for the 216-Z liquid waste disposal sites. This document provides an interim reference while a sitewide Waste Information Data System (WIDS) is developed and put on line. Eventually these and additional site data for all Hanford waste disposal sites will be available on WIDS. Compilation of existing data is the first step in evaluating the need and developing the technology for long-term management of these waste sites. The scope of this document is confined to data describing the status of the 216-Z waste sites as of December 31, 1979. Information and sketches are taken from existing documents and drawings.

Owens, K.W.

1981-05-01T23:59:59.000Z

465

Alternative Liquid Fuels Simulation Model (AltSim).  

SciTech Connect (OSTI)

The Alternative Liquid Fuels Simulation Model (AltSim) is a high-level dynamic simulation model which calculates and compares the production costs, carbon dioxide emissions, and energy balances of several alternative liquid transportation fuels. These fuels include: corn ethanol, cellulosic ethanol, biodiesel, and diesels derived from natural gas (gas to liquid, or GTL) and coal (coal to liquid, or CTL). AltSim allows for comprehensive sensitivity analyses on capital costs, operation and maintenance costs, renewable and fossil fuel feedstock costs, feedstock conversion efficiency, financial assumptions, tax credits, CO{sub 2} taxes, and plant capacity factor. This paper summarizes the preliminary results from the model. For the base cases, CTL and cellulosic ethanol are the least cost fuel options, at $1.60 and $1.71 per gallon, respectively. Base case assumptions do not include tax or other credits. This compares to a $2.35/gallon production cost of gasoline at September, 2007 crude oil prices ($80.57/barrel). On an energy content basis, the CTL is the low cost alternative, at $12.90/MMBtu, compared to $22.47/MMBtu for cellulosic ethanol. In terms of carbon dioxide emissions, a typical vehicle fueled with cellulosic ethanol will release 0.48 tons CO{sub 2} per year, compared to 13.23 tons per year for coal to liquid.

Baker, Arnold Barry; Williams, Ryan (Hobart and William Smith Colleges, Geneva, NY); Drennen, Thomas E.; Klotz, Richard (Hobart and William Smith Colleges, Geneva, NY)

2007-10-01T23:59:59.000Z

466

A fresh look at coal-derived liquid fuels  

SciTech Connect (OSTI)

35% of the world's energy comes from oil, and 96% of that oil is used for transportation. The current number of vehicles globally is estimated to be 700 million; that number is expected to double overall by 2030, and to triple in developing countries. Now consider that the US has 27% of the world's supply of coal yet only 2% of the oil. Coal-to-liquids technologies could bridge the gap between US fuel supply and demand. The advantages of coal-derived liquid fuels are discussed in this article compared to the challenges of alternative feedstocks of oil sands, oil shale and renewable sources. It is argued that pollutant emissions from coal-to-liquid facilities could be minimal because sulfur compounds will be removed, contaminants need to be removed for the FT process, and technologies are available for removing solid wastes and nitrogen oxides. If CO{sub 2} emissions for coal-derived liquid plants are captured and sequestered, overall emissions of CO{sub 2} would be equal or less than those from petroleum. Although coal liquefaction requires large volumes of water, most water used can be recycled. Converting coal to liquid fuels could, at least in the near term, bring a higher level of stability to world oil prices and the global economy and could serve as insurance for the US against price hikes from oil-producing countries. 7 figs.

Paul, A.D. [Benham Companies LLC (USA)

2009-01-15T23:59:59.000Z

467

Energy Efficient Electrochromic Windows Incorporating Ionic Liquids  

SciTech Connect (OSTI)

One approach to increasing the energy efficiency of windows is to control the amount of solar radiation transmitted through a window by using electrochromic technology. What is unique about this project is that the electrochromic is based on the reduction/oxidation reactions of cathodic and anodic organic semi-conducting polymers using room temperature ionic liquids as ion transport electrolytes. It is believed that these types of coatings would be a lower cost alternative to traditional all inorganic thin film based electrochromic technologies. Although there are patents1 based on the proposed technology, it has never been reduced to practice and thoroughly evaluated (i.e. durability and performance) in a window application. We demonstrate that by using organic semi-conductive polymers, specific bands of the solar spectrum (specifically visible and near infrared) can be targeted for electrochemical variable transmittance responsiveness. In addition, when the technology is incorporated into an insulating glass unit, the energy parameters such as the solar heat gain coefficient and the light to solar gain ratio are improved over that of a typical insulating glass unit comprised of glass with a low emissivity coating. A minimum of {approx}0.02 quads of energy savings per year with a reduction of carbon emissions for electricity of {approx}320 MKg/yr benefit is achieved over that of a typical insulating glass unit including a double silver low-E coating. Note that these values include a penalty in the heating season. If this penalty is removed (i.e. in southern climates or commercial structures where cooling is predominate year-round) a maximum energy savings of {approx}0.05 quad per year and {approx}801 MKg/yr can be achieved over that of a typical insulating glass unit including a double silver low-E coating. In its current state, the technology is not durable enough for an exterior window application. The primary downfall is that the redox chemistry fails to recover to a bleached state upon exposure to heat and solar radiation while being cycled over time from the bleached to the dark state. Most likely the polymers are undergoing degradation reactions which are accelerated by heat and solar exposure while in either the reduced or oxidized states and the performance of the polymers is greatly reduced over time. For this technology to succeed in an exterior window application, there needs to be more work done to understand the degradation of the polymers under real-life application conditions such as elevated temperatures and solar exposure so that recommendations for improvements in to the overall system can be made. This will be the key to utilizing this type of technology in any future real-life applications.

Cheri Boykin; James Finley; Donald Anthony; Julianna Knowles; Richard Markovic; Michael Buchanan; Mary Ann Fuhry; Lisa Perrine

2008-11-30T23:59:59.000Z

468

Bose-Einstein condensation in liquid 4He under pressure  

SciTech Connect (OSTI)

We present neutron scattering measurements of Bose-Einstein condensation, the atomic momen- tum distribution and Final State effects in liquid 4He under pressure. The condensate fraction at low temperature is found to decrease from n0 = 7.25 0.75% at SVP (p 0) to n0 = 3.2 0.75% at pressure p = 24 bar. This indicates an n0 = 3.0% in the liquid at the liquid/solid co-existence line (p = 25.3 bar). The atomic momentum distribution n(k) has high occupation of low k states and differs significantly from a Gaussian (e.g. a classical n(k)). Both n(k) and the Final state function broaden with increasing pressure, reflecting the increased localization of the 4He in space under increased pressure.

Glyde, Henry R [University of Delaware; Omar Diallo, Souleymane [ORNL; Azuah, Richard T [NIST Center for Neutron Research (NCRN), Gaithersburg, MD; Kirichek, Oleg [ISIS Facility, Rutherford Appleton Laboratory; Taylor, Jon W. [ISIS Facility, Rutherford Appleton Laboratory

2011-01-01T23:59:59.000Z

469

High-throughput liquid-absorption preconcentrator sampling methods  

DOE Patents [OSTI]

A system for detecting trace concentrations of an analyte in air includes a preconcentrator for the analyte and an analyte detector. The preconcentrator includes an elongated tubular container comprising a wettable material. The wettable material is continuously wetted with an analyte-sorbing liquid which flows from one part of the container to a lower end. Sampled air flows through the container in contact with the wetted material with a swirling motion which results in efficient transfer of analyte vapors or aerosol particles to the sorbing liquid and preconcentration of traces of analyte in the liquid. The preconcentrated traces of analyte may be either detected within the container or removed therefrom for injection into a separate detection means or for subsequent analysis. 12 figs.

Zaromb, S.

1994-07-12T23:59:59.000Z

470

Methods for separating medical isotopes using ionic liquids  

SciTech Connect (OSTI)

A method for extracting a radioisotope from an aqueous solution, the method comprising: a) intimately mixing a non-chelating ionic liquid with the aqueous solution to transfer at least a portion of said radioisotope to said non-chelating ionic liquid; and b) separating the non-chelating ionic liquid from the aqueous solution. In preferred embodiments, the method achieves an extraction efficiency of at least 80%, or a separation factor of at least 1.times.10.sup.4 when more than one radioisotope is included in the aqueous solution. In particular embodiments, the method is applied to the separation of medical isotopes pairs, such as Th from Ac (Th-229/Ac-225, Ac-227/Th-227), or Ra from Ac (Ac-225 and Ra-225, Ac-227 and Ra-223), or Ra from Th (Th-227 and Ra-223, Th-229 and Ra-225).

Luo, Huimin; Boll, Rose Ann; Bell, Jason Richard; Dai, Sheng

2014-10-21T23:59:59.000Z

471

Non-dissipative energy capture of confined liquid in nanopores  

SciTech Connect (OSTI)

In the past, energy absorption of protection/damping materials is mainly based on energy dissipation, which causes a fundamental conflict between the requirements of safety/comfort and efficiency. In the current study, a nanofluidic energy capture system is reported, which is based on nanoporous materials and nonwetting liquid. Both molecular dynamics simulations and experiments show that as the liquid overcomes the capillary effect and infiltrates into the nanopores, the mechanical energy of a stress wave could be temporarily stored by the confined liquid phase and isolated from the wave energy transmission path. Such a system can work under a relatively low pressure for mitigating high-pressure stress waves, not necessarily involved in any energy dissipation processes.

Xu, Baoxing; Chen, Xi [Columbia Nanomechanics Research Center, Department of Earth and Environmental Engineering, Columbia University, New York, New York 10027 (United States); Lu, Weiyi; Zhao, Cang [Department of Structural Engineering, University of CaliforniaSan Diego, La Jolla, California 92093-0085 (United States); Qiao, Yu, E-mail: yqiao@ucsd.edu [Department of Structural Engineering, University of CaliforniaSan Diego, La Jolla, California 92093-0085 (United States); Program of Materials Science and Engineering, University of CaliforniaSan Diego, La Jolla, CA 92093 (United States)

2014-05-19T23:59:59.000Z

472

Low Temperature Reduction of Alumina Using Fluorine Containing Ionic Liquids  

SciTech Connect (OSTI)

The major objective of the project is to establish the feasibility of using specific ionic liquids capable of sustaining aluminum electrolysis near room temperature at laboratory and batch recirculation scales. It will explore new technologies for aluminum and other valuable metal extraction and process methods. The new technology will overcome many of the limitations associated with high temperatures processes such as high energy consumption and corrosion attack. Furthermore, ionic liquids are non-toxic and could be recycled after purification, thus minimizing extraction reagent losses and environmental pollutant emissions. Ionic liquids are mixture of inorganic and organic salts which are liquid at room temperature and have wide operational temperature range. During the last several years, they were emerging as novel electrolytes for extracting and refining of aluminum metals and/or alloys, which are otherwise impossible using aqueous media. The superior high temperature characteristics and high solvating capabilities of ionic liquids provide a unique solution to high temperature organic solvent problems associated with device internal pressure build-up, corrosion, and thermal stability. However their applications have not yet been fully implemented due to the insufficient understanding of the electrochemical mechanisms involved in processing of aluminum with ionic liquids. Laboratory aluminum electrodeposition in ionic liquids has been investigated in chloride and bis (trifluoromethylsulfonyl) imide based ionic liquids. The electrowinning process yielded current density in the range of 200-500 A/m2, and current efficiency of about 90%. The results indicated that high purity aluminum (>99.99%) can be obtained as cathodic deposits. Cyclic voltammetry and chronoamperometry studies have shown that initial stages of aluminum electrodeposition in ionic liquid electrolyte at 30C was found to be quasi-reversible, with the charge transfer coefficient (0.40). Nucleation phenomena involved in aluminum deposition on copper in AlCl3-BMIMCl electrolyte was found to be instantaneous followed by diffusion controlled three-dimensional growth of nuclei. Diffusion coefficient (Do) of the electroactive species Al2Cl7 ion was in the range from 6.5 to 3.9107 cm2?s1 at a temperature of 30C. Relatively little research efforts have been made toward the fundamental understanding and modeling of the species transport and transformation information involved in ionic liquid mixtures, which eventually could lead to quantification of electrochemical properties. Except that experimental work in this aspect usually is time consuming and expensive, certain characteristics of ionic liquids also made barriers for such analyses. Low vapor pressure and high viscosity make them not suitable for atomic absorption spectroscopic measurement. In addition, aluminum electrodeposition in ionic liquid electrolytes are considered to be governed by multi-component mass, heat and charge transport in laminar and turbulent flows that are often multi-phase due to the gas evolution at the electrodes. The kinetics of the electrochemical reactions is in general complex. Furthermore, the mass transfer boundary layer is about one order of magnitude smaller than the thermal and hydrodynamic boundary layer (Re=10,000). Other phenomena that frequently occur are side reactions and temperature or concentration driven natural convection. As a result of this complexity, quantitative knowledge of the local parameters (current densities, ion concentrations, electrical potential, temperature, etc.) is very difficult to obtain. This situation is a serious obstacle for improving the quality of products, efficiency of manufacturing and energy consumption. The gap between laboratory/batch scale processing with global process control and nanoscale deposit surface and materials specifications needs to be bridged. A breakthrough can only be realized if on each scale the occurring phenomena are understood and quantified. Multiscale numerical modeling nevertheless can help t

Dr. R. G. Reddy

2007-09-01T23:59:59.000Z

473

Importance of glassy fragility for energy applications of ionic liquids  

E-Print Network [OSTI]

Ionic liquids (ILs) are salts that are liquid close to room temperature. Their possible applications are numerous, e.g., as solvents for green chemistry in various electrochemical devices, and even for such "exotic" purposes as spinning-liquid mirrors for lunar telescopes. Here we concentrate on their use for new advancements in energy-storage and -conversion devices: Batteries, supercapacitors or fuel cells using ILs as electrolytes could be important building blocks for the sustainable energy supply of tomorrow. Interestingly, ILs show glassy freezing and the universal, but until now only poorly understood dynamic properties of glassy matter, dominate many of their physical properties. We show that the conductivity of ILs, an essential figure of merit for any electrochemical application, depends in a systematic way not only on their glass temperature but also on the so-called fragility, characterizing the non-canonical super-Arrhenius temperature dependence of their ionic mobility.

P. Sippel; P. Lunkenheimer; S. Krohns; E. Thoms; A. Loidl

2015-02-24T23:59:59.000Z

474

High magnetic field processing of liquid crystalline polymers  

DOE Patents [OSTI]

A process of forming bulk articles of oriented liquid crystalline thermoset material, the material characterized as having an enhanced tensile modulus parallel to orientation of an applied magnetic field of at least 25 percent greater than said material processed in the absence of a magnetic field, by curing a liquid crystalline thermoset precursor within a high strength magnetic field of greater than about 2 Tesla, is provided, together with a resultant bulk article of a liquid crystalline thermoset material, said material processed in a high strength magnetic field whereby said material is characterized as having a tensile modulus parallel to orientation of said field of at least 25 percent greater than said material processed in the absence of a magnetic field.

Smith, Mark E. (Los Alamos, NM); Benicewicz, Brian C. (Los Alamos, NM); Douglas, Elliot P. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

475

High magnetic field processing of liquid crystalline polymers  

DOE Patents [OSTI]

A process of forming bulk articles of oriented liquid crystalline thermoset material, the material characterized as having an enhanced tensile modulus parallel to orientation of an applied magnetic field of at least 25 percent greater than said material processed in the absence of a magnetic field, by curing a liquid crystalline thermoset precursor within a high strength magnetic field of greater than about 2 Tesla, is provided, together with a resultant bulk article of a liquid crystalline thermoset material, said material processed in a high strength magnetic field whereby said material is characterized as having a tensile modulus parallel to orientation of said field of at least 25 percent greater than said material processed in the absence of a magnetic field.

Smith, M.E.; Benicewicz, B.C.; Douglas, E.P.

1998-11-24T23:59:59.000Z

476

Apparatus and method for ultrasonic treatment of a liquid  

DOE Patents [OSTI]

The present invention is an apparatus for ultrasonically treating a liquid to generate a product. The apparatus is capable of treating a continuously-flowing, or intermittently-flowing, liquid along a line segment coincident with the flow path of the liquid. The apparatus has one or more ultrasonic transducers positioned asymmetrically about the line segment. The ultrasonic field encompasses the line segment and the ultrasonic energy may be concentrated along the line segment. Lysing treatments have been successfully achieved with efficiencies of greater than 99% using ultrasound at MHz frequencies without erosion or heating problems and without the need for chemical or mechanical pretreatment, or contrast agents. The present invention overcomes drawbacks of current ultrasonic treatments beyond lysing and opens up new sonochemical and sonophysical processing opportunities.

Chandler, Darrell P.; Posakony, Gerald J.; Bond, Leonard J.; Bruckner-Lea, Cynthia J.

2006-04-04T23:59:59.000Z

477

Apparatus and method for ultrasonic treatment of a liquid  

DOE Patents [OSTI]

The present invention is an apparatus and method for ultrasonically treating a liquid to generate a product. The apparatus is capable of treating a continuously-flowing, or intermittently-flowing, liquid along a line segment coincident with the flow path of the liquid. The apparatus has one or more ultrasonic transducers positioned asymmetrically about the line segment. The ultrasonic field encompasses the line segment and the ultrasonic energy may be concentrated along the line segment. Lysing treatments have been successfully achieved with efficiencies of greater than 99% using ultrasound at MHz frequencies without erosion or heating problems and without the need for chemical or mechanical pretreatment, or contrast agents. The present invention overcomes drawbacks of current ultrasonic treatments beyond lysing and opens up new sonochemical and sonophysical processing opportunities.

Chandler, Darrell P [Richland, WA; Posakony, Gerald J [Richland, WA; Bond, Leonard J [Richland, WA; Bruckner-Lea, Cynthia J [Richland, WA

2003-01-14T23:59:59.000Z

478

Methods and systems for monitoring a solid-liquid interface  

DOE Patents [OSTI]

Methods and systems are provided for monitoring a solid-liquid interface, including providing a vessel configured to contain an at least partially melted material; detecting radiation reflected from a surface of a liquid portion of the at least partially melted material; providing sound energy to the surface; measuring a disturbance on the surface; calculating at least one frequency associated with the disturbance; and determining a thickness of the liquid portion based on the at least one frequency, wherein the thickness is calculated based on L=(2m-1)v.sub.s/4f, where f is the frequency where the disturbance has an amplitude maximum, v.sub.s is the speed of sound in the material, and m is a positive integer (1, 2, 3, . . . ).

Stoddard, Nathan G. (Gettysburg, PA); Clark, Roger F. (Frederick, MD)

2011-10-04T23:59:59.000Z

479

Gamma thermometer based reactor core liquid level detector  

DOE Patents [OSTI]

A system is provided which employs a modified gamma thermometer for determining the liquid coolant level within a nuclear reactor core. The gamma thermometer which normally is employed to monitor local core heat generation rate (reactor power), is modified by thermocouple junctions and leads to obtain an unambiguous indication of the presence or absence of coolant liquid at the gamma thermometer location. A signal processor generates a signal based on the thermometer surface heat transfer coefficient by comparing the signals from the thermocouples at the thermometer location. The generated signal is a direct indication of loss of coolant due to the change in surface heat transfer when coolant liquid drops below the thermometer location. The loss of coolant indication is independent of reactor power at the thermometer location. Further, the same thermometer may still be used for the normal power monitoring function.

Burns, Thomas J. (Knoxville, TN)

1983-01-01T23:59:59.000Z

480

Liquid-liquid phase transition model incorporating evidence for ferroelectric state near the lambda-point anomaly in supercooled water  

E-Print Network [OSTI]

We propose a unified model combining the first-order liquid-liquid and the second-order ferroelectric phase transitions models and explaining various features of the $\\lambda$-point of liquid water within a single theoretical framework. It becomes clear within the proposed model that not only does the long-range dipole-dipole interaction of water molecules yield a large value of dielectric constant $\\epsilon$ at room temperatures, our analysis shows that the large dipole moment of the water molecules also leads to a ferroelectric phase transition at a temperature close to the lambda-point. Our more refined model suggests that the phase transition occurs only in the low density component of the liquid and is the origin of the singularity of the dielectric constant recently observed in experiments with supercooled liquid water at temperature T~233K. This combined model agrees well with nearly every available set of experiments and explains most of the well-known and even recently obtained results of MD simulations.

Peter O. Fedichev; Leonid I. Menshikov

2012-01-30T23:59:59.000Z

Note: This page contains sample records for the topic "wood-based liquids lfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Pair distribution function study on compression of liquid gallium  

SciTech Connect (OSTI)

Integrating a hydrothermal diamond anvil cell (HDAC) and focused high energy x-ray beam from the superconductor wiggler X17 beamline at the National Synchrotron Light Source (NSLS) at the Brookhaven National Laboratory (BNL), we have successfully collected high quality total x-ray scattering data of liquid gallium. The experiments were conducted at a pressure range from 0.1GPa up to 2GPa at ambient temperature. For the first time, pair distribution functions (PDF) for liquid gallium at high pressure were derived up to 10 {angstrom}. Liquid gallium structure has been studied by x-ray absorption (Di Cicco & Filipponi, 1993; Wei et al., 2000; Comez et al., 2001), x-ray diffraction studies (Waseda & Suzuki, 1972), and molecular dynamics simulation (Tsay, 1993; Hui et al., 2002). These previous reports have focused on the 1st nearest neighbor structure, which tells us little about the atomic arrangement outside the first shell in non- crystalline materials. This study focuses on the structure of liquid gallium and the atomic structure change due to compression. The PDF results show that the observed atomic distance of the first nearest neighbor at 2.78 {angstrom} (first G(r) peak and its shoulder at the higher Q position) is consistent with previous studies by x-ray absorption (2.76 {angstrom}, Comez et al., 2001). We have also observed that the first nearest neighbor peak position did not change with pressure increasing, while the farther peaks positions in the intermediate distance range decreased with pressure increasing. This leads to a conclusion of the possible existence of 'locally rigid units' in the liquid. With the addition of reverse Monte Carlo modeling, we have observed that the coordination number in the local rigit unit increases with pressure. The bulk modulus of liquid gallium derived from the volume compression curve at ambient temperature (300K) is 12.1(6) GPa.

Luo, Shengnian [Los Alamos National Laboratory; Yu, Tony [SUNY-SB; Chen, Jiuhua [SUNY-SB; Ehm, Lars [SUNY-SB; Guo, Quanzhong [SUNY-SB; Parise, John [SUNY-SB

2008-01-01T23:59:59.000Z

482

Testing of Liquid Lithium Limiters in CDX-U  

SciTech Connect (OSTI)

Part of the development of liquid metals as a first wall or divertor for reactor applications must involve the investigation of plasma-liquid metal interactions in a functioning tokamak. Most of the interest in liquid-metal walls has focused on lithium. Experiments with lithium limiters have now been conducted in the Current Drive Experiment-Upgrade (CDX-U) device at the Princeton Plasma Physics Laboratory. Initial experiments used a liquid-lithium rail limiter (L3) built by the University of California at San Diego. Spectroscopic measurements showed some reduction of impurities in CDX-U plasmas with the L3, compared to discharges with a boron carbide limiter. While no reduction in recycling was observed with the L3, which had a plasma-wet area of approximately 40 cm2, subsequent experiments with a larger area fully toroidal lithium limiter demonstrated significant reductions in both recycling and in impurity levels. Two series of experiments with the toroidal limiter have now be en performed. In each series, the area of exposed, clean lithium was increased, until in the latest experiments the liquid-lithium plasma-facing area was increased to 2000 cm2. Under these conditions, the reduction in recycling required a factor of eight increase in gas fueling in order to maintain the plasma density. The loop voltage required to sustain the plasma current was reduced from 2 V to 0.5 V. This paper summarizes the technical preparations for lithium experiments and the conditioning required to prepare the lithium surface for plasma operations. The mechanical response of the liquid metal to induced currents, especially through contact with the plasma, is discussed. The effect of the lithium-filled toroidal limiter on plasma performance is also briefly described.

R. Majeski; R. Kaita; M. Boaz; P. Efthimion; T. Gray; B. Jones; D. Hoffman; H. Kugel; J. Menard; T. Munsat; A. Post-Zwicker; V. Soukhanovskii; J. Spaleta; G. Taylor; J. Timberlake; R. Woolley; L. Zakharov; M. Finkenthal; D. Stutman; G. Antar; R. Doerner; S. Luckhardt; R. Seraydarian; R. Maingi; M. Maiorano; S. Smith; D. Rodgers

2004-07-30T23:59:59.000Z

483

Plasma/liquid metal interactions during tokamak operation.  

SciTech Connect (OSTI)

One of the critical technological challenges of future tokamak fusion devices is the ability for plasma-facing components to handle both normal and abnormal plasma/surface interaction events that compromise their lifetime and operation of the machine. Under normal operation plasma/surface interactions that are important include: sputtering, particle implantation and recycling, He pumping and ELM (edge localized modes)-induced erosion. In abnormal or off-normal operation: disruptions and vertical displacement events (VDEs) are important. To extend PFC lifetime under these conditions, liquid-metals have been considered as candidate PFCs (Plasma-Facing Components), including: liquid lithium, tin-lithium, gallium and tin. Liquid lithium has been measured to have nonlinear increase of physical sputtering with rise in temperature. Such increase can be a result of exposure to ELM-level particle fluxes. The significant increase in particle flux to the divertor and nearby PFCs can enhance sputtering erosion by an order of magnitude or more. In addition from the standpoint of hydrogen recycling and helium pumping liquid lithium appears to be a good candidate plasma-facing material (PFM). Advanced designs of first wall and divertor systems propose the application of liquid-metals as an alternate PFC to contend with high-heat flux constraints of large-scale tokamak devices. Additional issues include PFC operation under disruptions and long temporal instabilities such as VDEs. A comprehensive two-fluid model is developed to integrate core and SOL (scrape-off layer) parameters during ELMs with PFC surface evolution using the HEIGHTS package. Special emphasis is made on the application of lithium as a candidate plasma-facing liquid-metal.

Hassanein, A.; Allain, J. P.; Insepov, Z.; Konkashbaev, I.; Energy Technology

2005-04-01T23:59:59.000Z

484

Plasma/Liquid-Metal Interactions During Tokamak Operation  

SciTech Connect (OSTI)

One of the critical technological challenges of future tokamak fusion devices is the ability for plasma-facing components to handle both normal and abnormal plasma/surface interaction events that compromise their lifetime and operation of the machine. Under normal operation plasma/surface interactions that are important include: sputtering, particle implantation and recycling, He pumping and ELM (edge localized modes)-induced erosion. In abnormal or off-normal operation: disruptions and vertical displacement events (VDEs) are important. To extend PFC lifetime under these conditions, liquid-metals have been considered as candidate PFCs (Plasma-Facing Components), including: liquid lithium, tin-lithium, gallium and tin.Liquid lithium has been measured to have nonlinear increase of physical sputtering with rise in temperature. Such increase can be a result of exposure to ELM-level particle fluxes. The significant increase in particle flux to the divertor and nearby PFCs can enhance sputtering erosion by an order of magnitude or more. In addition from the standpoint of hydrogen recycling and helium pumping liquid lithium appears to be a good candidate plasma-facing material (PFM). Advanced designs of first wall and divertor systems propose the application of liquid-metals as an alternate PFC to contend with high-heat flux constraints of large-scale tokamak devices. Additional issues include PFC operation under disruptions and long temporal instabilities such as VDEs. A comprehensive two-fluid model is developed to integrate core and SOL (scrape-off layer) parameters during ELMs with PFC surface evolution using the HEIGHTS package. Special emphasis is made on the application of lithium as a candidate plasma-facing liquid-metal.

Hassanein, A.; Allain, J.P.; Insepov, Z.; Konkashbaev, I. [Argonne National Laboratory (United States)

2005-04-15T23:59:59.000Z

485

Modeling of Spherical Torus Plasmas for Liquid Lithium Wall Experiments  

SciTech Connect (OSTI)

Liquid metal walls have the potential to solve first-wall problems for fusion reactors, such as heat load and erosion of dry walls, neutron damage and activation, and tritium inventory and breeding. In the near term, such walls can serve as the basis for schemes to stabilize magnetohydrodynamic (MHD) modes. Furthermore, the low recycling characteristics of lithium walls can be used for particle control. Liquid lithium experiments have already begun in the Current Drive eXperiment-Upgrade (CDX-U). Plasmas limited with a toroidally localized limiter have been investigated, and experiments with a fully toroidal lithium limiter are in progress. A liquid surface module (LSM) has been proposed for the National Spherical Torus Experiment (NSTX). In this larger ST, plasma currents are in excess of 1 MA and a typical discharge radius is about 68 cm. The primary motivation for the LSM is particle control, and options for mounting it on the horizontal midplane or in the divertor region are under consideration. A key consideration is the magnitude of the eddy currents at the location of a liquid lithium surface. During plasma start up and disruptions, the force due to such currents and the magnetic field can force a conducting liquid off of the surface behind it. The Tokamak Simulation Code (TSC) has been used to estimate the magnitude of this effect. This program is a two dimensional, time dependent, free boundary simulation code that solves the MHD equations for an axisymmetric toroidal plasma. From calculations that match actual ST equilibria, the eddy current densities can be determined at the locations of the liquid lithium. Initial results have shown that the effects could be significant, and ways of explicitly treating toroidally local structures are under investigation.

R. Kaita; S. Jardin; B. Jones; C. Kessel; R. Majeski; J. Spaleta; R. Woolley; L. Zakharo; B. Nelson; M. Ulrickson

2002-01-29T23:59:59.000Z

486

Refueling Liquid-Salt-Cooled Very High-Temperature Reactors  

SciTech Connect (OSTI)

The liquid-salt-cooled very high-temperature reactor (LS-VHTR), also called the Advanced High-Temperature Reactor (AHTR), is a new reactor concept that combines in a novel way four established technologies: (1) coated-particle graphite-matrix nuclear fuels, (2) Brayton power cycles, (3) passive safety systems and plant designs previously developed for liquid-metal-cooled fast reactors, and (4) low-pressure liquid-salt coolants. Depending upon goals, the peak coolant operating temperatures are between 700 and 1000 deg. C, with reactor outputs between 2400 and 4000 MW(t). Several fluoride salt coolants that are being evaluated have melting points between 350 and 500 deg. C, values that imply minimum refueling temperatures between 400 and 550 deg. C. At operating conditions, the liquid salts are transparent and have physical properties similar to those of water. A series of refueling studies have been initiated to (1) confirm the viability of refueling, (2) define methods for safe rapid refueling, and (3) aid the selection of the preferred AHTR design. Three reactor cores with different fuel element designs (prismatic, pebble bed, and pin-type fuel assembly) are being evaluated. Each is a liquid-salt-cooled variant of a graphite-moderated high-temperature reactor. The refueling studies examined applicable refueling experience from high-temperature reactors (similar fuel element designs) and sodium-cooled fast reactors (similar plant design with liquid coolant, high temperatures, and low pressures). The findings indicate that refueling is viable, and several approaches have been identified. The study results are described in this paper. (authors)

Forsberg, Charles W. [Oak Ridge National Laboratory, P.O. Box 2008 Oak Ridge, TN 37831 (United States); Peterson, Per F. [Nuclear Engineering Department, University of California at Berkeley, 6124a Etcheverry Hall, Berkeley, CA 94720 (United States); Cahalan, James E. [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States); Enneking, Jeffrey A. [Areva NP (United States); Phil MacDonald [Consultant, Cedar Hill, TX (United States)

2006-07-01T23:59:59.000Z

487

Model of a nuclear - optically - pumped liquid laser  

SciTech Connect (OSTI)

The model of a nuclear - optically - pumped liquid laser is constructed and the laser characteristics are analysed for different parameters of the setup and pump pulse, compositions of the converter media and active elements. The lasing parameters of the liquid laser using heavy-water solution of {sup 245}Cm as the converter medium and neodymium-containing phosphorous oxychloride (phosphoryl chloride) as the active element are calculated. It follows from the results of calculations that lasing can be achieved in these media pumped by neutrons from the BARS-6 reactor. (lasers)

Seregin, A A; D'yachenko, P P; Seregina, E A [State Scientific Center of the Russian Federation 'A.I. Leipunski Institute for Physics and Power Engineering', Obninsk, Kaluga Region (Russian Federation)

2003-06-30T23:59:59.000Z

488

Recovery of tritium from a liquid lithium blanket  

SciTech Connect (OSTI)

The sorption of tritium on yttrium from liquid lithium and the subsequent release of tritium from yttrium by thermal regeneration of the metal sorbent were investigated to study such a tritium-recovery process for a fusion reactor blanket of liquid lithium. Recent static sorption experiments have shown the effects of lithium temperature and possible impurities on the sorption of tritium. Diffusivity data, obtained from previous tritium recovery experiments, were evaluated to show the importance of the yttrium surface condition in controlling the release of tritium.

Talbot, J.B.

1981-01-01T23:59:59.000Z

489

High speed shadowgraphy for the study of liquid drops  

E-Print Network [OSTI]

the separation and size of the electrodes and the surrounding medium. Many of the commercially available systems use argon gas, and produce pulse durations of the order of 5 to 20 ns, 9 to 25 mJ of electric flash ener- gy, and utilize 3- 5 kV power supplies... Sciences Ltd A-series single nozzle CIJ printer with a re- ported nozzle diameter of 60 m. Essentially, in CIJ mode the liquid is pumped continuously into the head, generating an internal pressure which drives the liquid through the nozzle and creates a...

Castrejon-Pita, J.R.; Castrejon-Garcia, R.; Hutchings, I.M.

2012-01-01T23:59:59.000Z

490

Surface formation in immiscible liquids with orifice mixers  

E-Print Network [OSTI]

investigation of the mixing of isadscible liquids (Kerosene and water) with orifices was made as a continuation of previous work done by Murdoch and McNair. Data were obtained by making film exposures of flow conditions inside a pipe section aud just below... stable, Water and kerosene, for example, are a pair of liquids with high 0 interfacial tension (/+8 dynes/cm at 20 0), while water and ethyl ether are a pair with relatively low interfacial tension (10, '7 dynes/cm at 20oC ). Consequently, it is more...

Welch, Nathan Edgar

1956-01-01T23:59:59.000Z

491

Phase effects for electrons in liquid water and water vapor  

SciTech Connect (OSTI)

The objective of these studies is to compare transport, energy loss, and other phenomena for electrons in water in the liquid and vapor phases. Understanding the differences and similarities is an interesting physics problem in its own right. It is also important for applying the relatively large body of experimental data available for the vapor to the liquid, which is of greater relevance in radiobiology. This paper presents a summary of results from a series of collaborative studies carried out by the authors at Oak Ridge National Laboratory (ORNL) and the Gesellschaft fuer Strahlen- und Umweltforschung (GSF). 14 figs.

Turner, J.E.; Paretzke, H.G.; Wright, H.A.; Hamm, R.N.; Ritchie, R.H.

1988-01-01T23:59:59.000Z

492

Screening model for nanowire surface-charge sensors in liquid  

E-Print Network [OSTI]

The conductance change of nanowire field-effect transistors is considered a highly sensitive probe for surface charge. However, Debye screening of relevant physiological liquid environments challenge device performance due to competing screening from the ionic liquid and nanowire charge carriers. We discuss this effect within Thomas-Fermi and Debye-Huckel theory and derive analytical results for cylindrical wires which can be used to estimate the sensitivity of nanowire surface-charge sensors. We study the interplay between the nanowire radius, the Thomas-Fermi and Debye screening lengths, and the length of the functionalization molecules. The analytical results are compared to finite-element calculations on a realistic geometry.

Martin H. Sorensen; Niels Asger Mortensen; Mads Brandbyge

2007-08-17T23:59:59.000Z

493

Process for minimizing solids contamination of liquids from coal pyrolysis  

DOE Patents [OSTI]

In a continuous process for recovery of liquid hydrocarbons from a solid carbonaceous material by pyrolysis of the carbonaceous material in the presence of a particulate source of heat, particulate contamination of the liquid hydrocarbons is minimized. This is accomplished by removing fines from the solid carbonaceous material feed stream before pyrolysis, removing fines from the particulate source of heat before combining it with the carbonaceous material to effect pyrolysis of the carbonaceous material, and providing a coarse fraction of reduced fines content of the carbon containing solid residue resulting from the pyrolysis of the carbonaceous material before oxidizing carbon in the carbon containing solid residue to form the particulate source of heat.

Wickstrom, Gary H. (Yorba Linda, CA); Knell, Everett W. (Los Alamitos, CA); Shaw, Benjamin W. (Costa Mesa, CA); Wang, Yue G. (West Covina, CA)

1981-04-21T23:59:59.000Z

494

Equilibrium configurations of nematic liquid crystals on a torus  

E-Print Network [OSTI]

The topology and the geometry of a surface play a fundamental role in determining the equilibrium configurations of thin films of liquid crystals. We propose here a theoretical analysis of a recently introduced surface Frank energy, in the case of two-dimensional nematic liquid crystals coating a toroidal particle. Our aim is to show how a different modeling of the effect of extrinsic curvature acts as a selection principle among equilibria of the classical energy, and how new configurations emerge. In particular, our analysis predicts the existence of new stable equilibria with complex windings.

Antonio Segatti; Michael Snarski; Marco Veneroni

2014-06-13T23:59:59.000Z

495

Controlled environment vitrification system for preparation of liquids  

DOE Patents [OSTI]

A system is described for preparing specimens in a controlled environment to insure that a liquid or partially liquid specimen is maintained in its original state while it is being prepared, and once prepared the specimen is vitrified or solidified with minimal alteration of its microstructure. The controlled environment is provided within a chamber where humidity and temperature can be controlled precisely while the specimen is prepared. The specimen is mounted on a plunger and a shutter controlled opening is opened substantially simultaneously with release of the plunger so the specimen is propelled through the shutter into an adjacent cryogenic bath. 7 figs.

Bellare, J.R.; Davis, H.T.; Scriven, L.E. II; Talmon, Y.

1988-06-28T23:59:59.000Z

496

Gradient index liquid crystal devices and method of fabrication thereof  

DOE Patents [OSTI]

Laser beam apodizers using cholesteric liquid crystals provides soft edge profile by use of two separate cholesteric liquid crystal mixtures with different selective reflection bands which in an overlap region have a gradient index where reflectivity changes as a function of position. The apodizers can be configured as a one-dimensional beam apod INTRODUCTION The U.S. government has rights in the invention under Contract No. DE-FC03-85DP40200 between the University of Rochester and the Department of Energy.

Lee, J.C.; Jacobs, S.

1991-10-29T23:59:59.000Z

497

Non-polar Flexoelectrooptic Effect in Blue Phase Liquid Crystals  

E-Print Network [OSTI]

Blue phase liquid crystals are not usually considered to exhibit a flexoelectrooptic effect, due to the polar nature of flexoelectric switching and the cubic or amorphous structure of blue phases. Here, we derive the form of the flexoelectric contribution to the Kerr constant of blue phases, and experimentally demonstrate and measure the separate contributions to the Kerr constant arising from flexoelectric and dielectric effects. Hence, a non-polar flexoelectrooptic effect is demonstrated in blue phase liquid crystals, which will have consequences for the engineering of novel blue-phase electrooptic technology.

B. I. Outram; S. J. Elston; F. Castles; M. M. Qasim; H. Coles; H. -Y. Chen; S. -F. Lu

2014-06-12T23:59:59.000Z

498

Diffraction of light by topological defects in liquid crystals  

E-Print Network [OSTI]

We study light scattering by a hedgehog-like and linear disclination topological defects in a nematic liquid crystal by a metric approach. Light propagating near such defects feels an effective metric equivalent to the spatial part of the global monopole and cosmic string geometries. We obtain the scattering amplitude and the differential and total scattering cross section for the case of the hedgehog defect, in terms of the characteristic parameters of the liquid crystal. Studying the disclination case, a cylindrical partial wave method is developed. As an application of the previous developments, we also examine the temperature influence on the localization of the diffraction patterns.

E. Pereira; F. Moraes

2010-11-22T23:59:59.000Z

499

Trap seal for open circuit liquid cooled turbines  

DOE Patents [OSTI]

An improved trap seal for open circuit liquid cooled turbines is disclosed. The trap seal of the present invention includes an annular recess formed in the supply conduit of cooling channels formed in the airfoil of the turbine buckets. A cylindrical insert is located in the annular recesses and has a plurality of axial grooves formed along the outer periphery thereof and a central recess formed in one end thereof. The axial grooves and central recess formed in the cylindrical insert cooperate with the annular recess to define a plurality of S-shaped trap seals which permit the passage of liquid coolant but prohibit passage of gaseous coolant.

Grondahl, Clayton M. (Clifton Park, NY); Germain, Malcolm R. (Ballston Lake, NY)

1980-01-01T23:59:59.000Z

500

Liquid Spills on Permeable Soil Surfaces: Experimental Confirmations  

SciTech Connect (OSTI)

Predictive tools for assessing the quantity of a spill on a soil from the observed spreading area could contribute to improving remediation when it is necessary. On a permeable soil, the visible spill area only hints about the amount of liquid that might reside below the surface. An understanding of the physical phenomena involved with spill propagation on a soil surface is key to assessing the liquid amount possibly present beneath the surface. The objective of this study is an improved prediction capability for spill behavior.

Simmons, Carver S.; Keller, Jason M.

2005-09-29T23:59:59.000Z