Sample records for wood waste non-electric

  1. Generating power with waste wood

    SciTech Connect (OSTI)

    Atkins, R.S.

    1995-02-01T23:59:59.000Z

    Among the biomass renewables, waste wood has great potential with environmental and economic benefits highlighting its resume. The topics of this article include alternate waste wood fuel streams; combustion benefits; waste wood comparisons; waste wood ash; pilot scale tests; full-scale test data; permitting difficulties; and future needs.

  2. Using waste wood as fuel saves $2000 per day

    SciTech Connect (OSTI)

    Ragland, W. (Cherokee Brick Co., Raleigh, NC); Byrnes, D.

    1981-11-01T23:59:59.000Z

    Sawdust and wood residue replaced natural gas or number 2 fuel oil to fire 2 kilns at the Cherokee Brick Co. in Raleigh, NC, resulting in savings of $2000/day. Exhaust air from the kilns was sent directly back to a rotating dryer to dry the waste wood. The dried wood containing 8 to 12% moisture was supplied, around the clock, at a rate of 140 ton/day of dry material. (BLM)

  3. Kilowatts From Waste Wood In The Furniture Industry

    E-Print Network [OSTI]

    Nailen, R. L.

    1981-01-01T23:59:59.000Z

    recently, the Singer Furniture Co., Lenoir, N. Carolina, purchased a 450 kilowatt steam turbine/induction generator set to use extra steam - produced by 'free' waste wood fuel - in generating 15% of the plant's electrical energy demand. The turbine...

  4. Wood furnance cuts fuel bills and wastes

    SciTech Connect (OSTI)

    Not Available

    1982-01-01T23:59:59.000Z

    The use of a wood burning furnace instead of propane to heat the Saddlecraft manufacturing plant in Cherokee, North Carolina, is described. A chart shows gallons of propane usage in winter for five years. (MHR)

  5. Use of Wood Waste in Rehabilitation of Landings Constructed on Fine-Textured

    E-Print Network [OSTI]

    Sanborn, Paul

    Use of Wood Waste in Rehabilitation of Landings Constructed on Fine-Textured Soils, Central rehabilitated with three operationally feasible treatments: (1) incorpora- tion of waste wood chips (140 t of chipped wood wastes, with appropriate supplementary N fertilization, in rehabilitation of access

  6. Presentation 2.6: Wood waste for energy: lessons learnt from tropical regions Paul Vantomme

    E-Print Network [OSTI]

    of forest products with more value adding, and promoting the use of wood waste to increase energy efficiency tropical timber trade · almost 80% of the world's tropical forests ITTO ­ Wood Waste for Energy Working and forest industries GhanaDevelopment of energy alternatives for the efficient utilization of wood

  7. An evaluation of atmospheric evaporation for treating wood preserving wastes

    E-Print Network [OSTI]

    Shack, Pete A

    1976-01-01T23:59:59.000Z

    i. hat a constant rate of total organi carbon and chemical oxygen demand removal occurred as the wastewai. r was evaporated. A procedure for designing atmospheric evaporation ponds was developed and applied to a hypothetical wood preserving plant.... From this example design estimates of equivalent hydrocarbon concentrations in the air downwind of the pond are made. Various other design con- siderations such as the input data, modifications to the design pro- cedure, solids accumulation...

  8. The treatment of wood preserving wastes with activated carbon

    E-Print Network [OSTI]

    Pence, Robert Fuller

    1978-01-01T23:59:59.000Z

    requirement and treatment schemes should be based on these combined requirements. Current treatment schemes employed in the wood preserving industry combine physical, chemical, and biological processes and operations in treating wastewaters. Jones, et al...-five of the plants performed secondary treatment on-site of which 32 used biological methods. Only 6 per- cent discharged their wastewaters directly to the environment without any form of treatment and approximately 40 percent of the plants planned to change...

  9. CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal

    E-Print Network [OSTI]

    Florida, University of

    CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW in waste-to-energy (WTE) facilities. In other countries, the predominant disposal option for wood, others have not, and the product continues to enter the waste stream from construction, demolition

  10. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOE Patents [OSTI]

    Moens, L.

    1995-07-11T23:59:59.000Z

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350 and 375 C to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan. 2 figs.

  11. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOE Patents [OSTI]

    Moens, Luc (Lakewood, CO)

    1995-01-01T23:59:59.000Z

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350.degree. and 375.degree. C. to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan.

  12. Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste

    E-Print Network [OSTI]

    Florida, University of

    Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste Helena M technologies evaluated included X-ray fluorescence spectroscopy (XRF) and laser induced breakdown spectroscopy (LIBS). The XRF detector system utilized in this study was capable of rapidly detecting the presence

  13. Dover Textiles - A Case History on Retrofitting Factories with a Boiler System Fueled on Coal, Wood and Waste

    E-Print Network [OSTI]

    Pincelli, R. D.

    1981-01-01T23:59:59.000Z

    The shortage of affordable gas and oil boiler fuels and the recent Iran/Iraq war underscores the urgent need for the American industrial system to convert to domestically controlled fuels and particularly coal, wood, and waste. More talk than action...

  14. Exergy analysis of the Chartherm process for energy valorization and material recuperation of chromated copper arsenate (CCA) treated wood waste

    SciTech Connect (OSTI)

    Bosmans, A., E-mail: anouk.bosmans@mech.kuleuven.be [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium); Auweele, M. Vanden; Govaerts, J.; Helsen, L. [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium)

    2011-04-15T23:59:59.000Z

    The Chartherm process (Thermya, Bordeaux, France) is a thermochemical conversion process to treat chromated copper arsenate (CCA) impregnated wood waste. The process aims at maximum energy valorization and material recuperation by combining the principles of low-temperature slow pyrolysis and distillation in a smart way. The main objective of the exergy analysis presented in this paper is to find the critical points in the Chartherm process where it is necessary to apply some measures in order to reduce exergy consumption and to make energy use more economic and efficient. It is found that the process efficiency can be increased with 2.3-4.2% by using the heat lost by the reactor, implementing a combined heat and power (CHP) system, or recuperating the waste heat from the exhaust gases to preheat the product gas. Furthermore, a comparison between the exergetic performances of a 'chartherisation' reactor and an idealized gasification reactor shows that both reactors destroy about the same amount of exergy (i.e. 3500 kW kg{sub wood}{sup -1}) during thermochemical conversion of CCA-treated wood. However, the Chartherm process possesses additional capabilities with respect to arsenic and tar treatment, as well as the extra benefit of recuperating materials.

  15. Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report

    SciTech Connect (OSTI)

    Holzman, M.I.

    1995-08-01T23:59:59.000Z

    The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

  16. Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper Science and Technology; Georgia Institute of Technology, Atlanta, GA.

    E-Print Network [OSTI]

    Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper lignocellulosics to biodiesel fuel Feedstocks ABSTRACT This poster examines the potential of utilizing waste paper CelluloseHemicelluloseLigninResource Cracking and Refining of Polysaccharides Bio-Diesel Substitutes

  17. Juan A. Blanco & Dave Flanders (University of British Columbia/Universidad Pblica de Navarra), Dale Littlejohn & Peter Robinson (Community Energy Association), David Dubois (Wood Waste to Rural Heat Project)

    E-Print Network [OSTI]

    Pedersen, Tom

    ), Dale Littlejohn & Peter Robinson (Community Energy Association), David Dubois (Wood Waste to Rural Heat Project) August 2013 Fire in the woods or fire in the boiler? A new tool to help rural communities .............................................................................................................................. 25 #12;4 Pacific Institute for Climate Solutions EXECUTIVE SUMMARY Many rural British Columbia (BC

  18. Journal of Hazardous Materials B114 (2004) 7591 Leaching of CCA-treated wood: implications for waste disposal

    E-Print Network [OSTI]

    Florida, University of

    Journal of Hazardous Materials B114 (2004) 75­91 Leaching of CCA-treated wood: implications, and copper from chromated copper arsenate (CCA)-treated wood poses possible environmental risk when disposed. Samples of un-weathered CCA-treated wood were tested using a variety of the US regulatory leaching

  19. Development of METHANE de-NOX Reburn Process for Wood Waste and Biomass Fired Stoker Boilers - Final Report - METHANE de-NOX Reburn Technology Manual

    SciTech Connect (OSTI)

    J. Rabovitser; B. Bryan; S. Wohadlo; S. Nester; J. Vaught; M. Tartan (Gas Technology Institute); R. Glickert (ESA Environmental Solutions)

    2007-12-31T23:59:59.000Z

    The overall objective of this project was to demonstrate the effectiveness of the METHANE de-NOX (MdN) Reburn process in the Forest Products Industry (FPI) to provide more efficient use of wood and sludge waste (biosolids) combustion for both energy generation and emissions reduction (specifically from nitrogen oxides (NOx)) and to promote the transfer of the technology to the wide range of wood waste-fired stoker boilers populating the FPI. This document, MdN Reburn Commercial Technology Manual, was prepared to be a resource to promote technology transfer and commercialization activities of MdN in the industry and to assist potential users understand its application and installation requirements. The Manual includes a compilation of MdN commercial design data from four different stoker boiler designs that were baseline tested as part of the development effort. Design information in the Manual include boiler CFD model studies, process design protocols, engineering data sheets and commercial installation drawings. Each design package is unique and implemented in a manner to meet specific mill requirements.

  20. PROSPECTS FOR CO-FIRING OF CLEAN COAL AND CREOSOTE-TREATED WASTE WOOD AT SMALL-SCALE POWER STATIONS

    E-Print Network [OSTI]

    Janis Zandersons; Aivars Zhurinsh; Edward Someus

    If a small-scale clean coal fu eled power plant is co-fu eled with 5 % of cre o-sote-treated used-up sleeper wood, the de con tam i na tion by carbonisation at 500 C in an in di rectly heated ro tary kiln with the di am e ter 1.7 m and ef fec-tive length 10 m can be real ised. It should be in cluded in the 3R Clean Coal Carbonisation Plant sys tem, which pro cesses coal. It will im prove the heat bal ance of the sys tem, since the carbonisation of wood will de liver a lot of high caloricity pyroligneous vapour to the joint fur nace of the 3R Clean Coal Carbonisation Plant. Pine wood sleeper sap wood con tains 0.25 % of sul phur, but the av er age pine sleeper wood (sap wood and heart wood) 0.05% of sul phur. Most of the sul phur is lost with the pyroligneous vapour and burned in the fur nace. Since the 3R Clean Coal Carbonisation Plant is equipped with a flue gases clean ing sys tem, the SO2 emis sion level will not ex-ceed 5 mg/m 3. The char coal of the sap wood por tion of sleep ers and that of the av er age sleeper wood will con tain 0.22 % and 0.035 % of sul phur, re spec-tively. The in crease of the carbonisation tem per a ture does not sub stan tially de crease the sul phur con tent in char coal, al though it is suf fi ciently low, and the char coal can be co-fired with clean coal. The con sid ered pro cess is suit-able for small power plants, if the bio mass in put in the com mon en ergy bal-ance is 5 to 10%. If the mean dis tance of sleep ers trans por ta tion for Cen tral and East ern Eu-rope is es ti mated not to ex ceed 200 km, the co-com bus tion of clean coal and carbonised sleep ers would be an ac cept able op tion from the en vi ron men tal and eco nomic points of view.

  1. EXTENDING NUCLEAR ENERGY TO NON-ELECTRICAL APPLICATIONS

    SciTech Connect (OSTI)

    R. Boardman; M. McKellar; D. Ingersoll; Z. Houghton; , R. Bromm; C. Desportes

    2014-09-01T23:59:59.000Z

    Electricity represents less than half of all energy consumed in the United States and globally. Although a few commercial nuclear power plants world-wide provide energy to non-electrical applications such as district heating and water desalination, nuclear energy has been largely relegated to base-load electricity production. A new generation of smaller-sized nuclear power plants offers significant promise for extending nuclear energy to many non-electrical applications. The NuScale small modular reactor design is especially well suited for these non-traditional customers due to its small unit size, very robust reactor protection features and a highly flexible and scalable plant design. A series of technical and economic evaluation studies have been conducted to assess the practicality of using a NuScale plant to provide electricity and heat to a variety of non-electrical applications, including water desalination, oil refining, and hydrogen production. The studies serve to highlight the unique design features of the NuScale plant for these applications and provide encouraging conclusions regarding the technical and economic viability of extending clean nuclear energy to a broad range of non-electrical energy consumers.

  2. Mercury emissions during cofiring of sub-bituminous coal and biomass (chicken waste, wood, coffee residue, and tobacco stalk) in a laboratory-scale fluidized bed combustor

    SciTech Connect (OSTI)

    Yan Cao; Hongcang Zhou; Junjie Fan; Houyin Zhao; Tuo Zhou; Pauline Hack; Chia-Chun Chan; Jian-Chang Liou; Wei-ping Pan [Western Kentucky University (WKU), Bowling Green, KY (USA). Institute for Combustion Science and Environmental Technology (ICSET)

    2008-12-15T23:59:59.000Z

    Four types of biomass (chicken waste, wood pellets, coffee residue, and tobacco stalks) were cofired at 30 wt % with a U.S. sub-bituminous coal (Powder River Basin Coal) in a laboratory-scale fluidized bed combustor. A cyclone, followed by a quartz filter, was used for fly ash removal during tests. The temperatures of the cyclone and filter were controlled at 250 and 150{sup o}C, respectively. Mercury speciation and emissions during cofiring were investigated using a semicontinuous mercury monitor, which was certified using ASTM standard Ontario Hydra Method. Test results indicated mercury emissions were strongly correlative to the gaseous chlorine concentrations, but not necessarily correlative to the chlorine contents in cofiring fuels. Mercury emissions could be reduced by 35% during firing of sub-bituminous coal using only a quartz filter. Cofiring high-chlorine fuel, such as chicken waste (Cl = 22340 wppm), could largely reduce mercury emissions by over 80%. When low-chlorine biomass, such as wood pellets (Cl = 132 wppm) and coffee residue (Cl = 134 wppm), is cofired, mercury emissions could only be reduced by about 50%. Cofiring tobacco stalks with higher chlorine content (Cl = 4237 wppm) did not significantly reduce mercury emissions. Gaseous speciated mercury in flue gas after a quartz filter indicated the occurrence of about 50% of total gaseous mercury to be the elemental mercury for cofiring chicken waste, but occurrence of above 90% of the elemental mercury for all other cases. Both the higher content of alkali metal oxides or alkali earth metal oxides in tested biomass and the occurrence of temperatures lower than 650{sup o}C in the upper part of the fluidized bed combustor seemed to be responsible for the reduction of gaseous chlorine and, consequently, limited mercury emissions reduction during cofiring. 36 refs., 3 figs. 1 tab.

  3. Waste Management in Dsseldorf Combination of separate collection,

    E-Print Network [OSTI]

    Columbia University

    Waste Management in Düsseldorf Combination of separate collection, recycling and waste-to-energy Biowaste Garden waste Light packaging Paper Glass Wood from bulky waste Bulky waste Rest / mixed waste Bio- Garden- Paper Glass Light Metals Wood Bulky Rest waste waste Card- Pack. waste board Saved CO2

  4. Journal of Hazardous Materials A135 (2006) 2131 Leaching of chromated copper arsenate (CCA)-treated wood in a

    E-Print Network [OSTI]

    Florida, University of

    -treated wood is incinerated, resulting arsenic emis- sions demand the use of proper air pollution control, mining waste, or wood. The feasibility of managing CCA-treated wood in monofills was examined using

  5. WoodChemistry Wood Degradation & Preservation

    E-Print Network [OSTI]

    Geldenhuys, Jaco

    31 WoodChemistry Wood Degradation & Preservation Chemical Utilization of Wood Pulp & Paper and carbohydrates is of considerable interest in connection with a number of issues in wood chemistry, such as the reactions taking place during the formation of wood, the natural molecular weight distribution of lignin

  6. Wood Resources International

    E-Print Network [OSTI]

    Wood Resources International Wood Raw Material Consumption on the Rise Despite Weak Global Economy UNECE Timber Committee Meeting October 7-8, 2003 Geneva, Switzerland Hkan Ekstrm Wood Resources International #12;Wood Resources International Outline Roundwood Removals Roundwood Consumption Raw

  7. Wood biology We present investigations of wood

    E-Print Network [OSTI]

    Cufar, Katarina

    Wood biology We present investigations of wood formation which started in 1999. Samples for investigations are taken from living trees. Processes of wood formation are affected by different factors like temperature and precipitation. #12;We use light microscopy to study cell wall formation in the wood. Double

  8. Wood Curriculum vitae 1 ERIC MATTHEW WOOD

    E-Print Network [OSTI]

    Mladenoff, David

    Wood ­ Curriculum vitae 1 ERIC MATTHEW WOOD Spatial Analysis for Conservation and Department/17/2014 Postdoctoral Research Associate, University of Wisconsin-Madison PUBLICATIONS Wood, E. M., A. M. Pidgeon, V. C community structure in U.S protected areas. Ecological Applications in press Wood, E. M., and A. M. Pidgeon

  9. FRACTURE TOUGHNESS OF WOOD AND WOOD COMPOSITES

    E-Print Network [OSTI]

    Nairn, John A.

    FRACTURE TOUGHNESS OF WOOD AND WOOD COMPOSITES DURING CRACK PROPAGATION Noah Matsumoto Structural, USA * Corresponding author: John.Nairn@oregonstate.edu SWST member #12;Fracture Toughness of Wood and Wood Composites During Crack Propagation ABSTRACT The mode I fracture toughness as a function of crack

  10. Wood-Coal Fired "Small" Boiler Case Study

    E-Print Network [OSTI]

    Pincelli, R. D.

    1980-01-01T23:59:59.000Z

    extremely attrac t:i.ve to today's capital investment market. 7. Several states, including North Carolina, have enacted 15% State Tax Credits to further the use of wood fuel boilers. Specific examples of the utilization of wood as a boiler fuel include... on the fact that Galaxy would be purchasing all of its waste wood fuel, as well as supplemental coal if needed. Efficiency guarantees of 80% on wood waste with less than 10% moisture content were given, as well as 78.5% on coal. These efficiencies were...

  11. Alaska Wood Biomass Energy Project Final Report

    SciTech Connect (OSTI)

    Jonathan Bolling

    2009-03-02T23:59:59.000Z

    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  12. Wood Quality: The Effects

    E-Print Network [OSTI]

    Wood Quality: The Effects of Planting Density and Thinning Eini C. Lowell PNW Research Station wood quality? By volume, characteristic, product? #12;http://jilldenton.files.wordpress.com/2007, faster #12;What is it that defines wood quality?What is it that defines wood quality? Density: earlywood

  13. Wood Products 201213 Student Handbook

    E-Print Network [OSTI]

    Boyer, Elizabeth W.

    Wood Products 201213 Student Handbook Ecosystem Science and Management College ........................................................................................................................... 2 Wood Products Undergraduate Program ...................................................................................................................................................... 3 Careers for Wood Products Majors

  14. Quantities of Arsenic-Treated Wood in Demolition Debris Generated by

    E-Print Network [OSTI]

    Florida, University of

    Research Quantities of Arsenic-Treated Wood in Demolition Debris Generated by Hurricane Katrina B R of the demolition debris is wood waste of which a significant proportion is treated with preservatives, including preservatives containing arsenic. As a result of the large scale destruction of treated wood structures

  15. Energie-Cits 2001 BIOMASS -WOOD

    E-Print Network [OSTI]

    Energie-Cités 2001 BIOMASS - WOOD Gasification / Cogeneration ARMAGH United Kingdom Gasification is transferring the combustible matters in organic waste or biomass into gas and pure char by burning the fuel via it allows biomass in small-scaled engines and co-generation units ­ which with conventional technologies

  16. Introduction Mich ael Wood

    E-Print Network [OSTI]

    Rowley, Clarence W.

    Introduction Mich ael Wood Italo Calvino was discreet about his life and the lives of others or mechanical means without prior written permission of the publisher. #12;viii michael wood notion with great

  17. WOOD STREET METERED LOT

    E-Print Network [OSTI]

    Dai, Yang

    LOT E1 LOT O WOOD STREET METERED LOT LOT W5 LOT C4 LOT B4 LOT L LOT M MARSHFIELDAVENUE PAULINASTREET Clinical Sciences Building UI Hospital Wood Street Station Clinical Sciences North Grand Grounds Garden

  18. Qualifying Wood Stove Deduction

    Broader source: Energy.gov [DOE]

    This incentive allows Arizona taxpayers to deduct the cost of converting an existing wood fireplace to a qualifying wood stove. The cost to purchase and install all necessary equipment is tax...

  19. Residential Wood Residential wood combustion (RWC) is

    E-Print Network [OSTI]

    Residential Wood Combustion Residential wood combustion (RWC) is increasing in Europe because PM2.5. Furthermore, other combustion- related sources of OA in Europe may need to be reassessed. Will it affect global OA emission estimates? Combustion of biofuels is globally one of the major OA sources

  20. WOOD PRODUCTS AND UTILIZATION

    E-Print Network [OSTI]

    Standiford, Richard B.

    WOOD PRODUCTS AND UTILIZATION V #12;#12;443USDA Forest Service Gen. Tech. Rep. PSW-GTR-160. 1997. Section Overview Wood Products and Utilization1 John R. Shelly2 Forests are obviously a very important asset to California, and their economic and social value to the state is well documented. Wood

  1. CURRICULUM VITAE Robert Wood

    E-Print Network [OSTI]

    Wood, Robert

    CURRICULUM VITAE Robert Wood Assistant Professor Atmospheric Sciences, Box 351640, University. Publications [1] Wood, R., I. M. Stromberg, P. R. Jonas and C. S. Mill, 1997: Analysis of an air motion system on a light aircraft for boundary layer research. J. Atmos. Oceanic Technol., 14, 960-968. [2] Wood, R., D. W

  2. Integrating The Non-Electrical Worker Into The Electrical Safety Program

    SciTech Connect (OSTI)

    Mills, T. David; McAlhaney, John H.

    2012-08-17T23:59:59.000Z

    The intent of this paper is to demonstrate an electrical safety program that incorporates all workers into the program, not just the electrical workers. It is largely in response to a paper presented at the 2012 ESW by Lanny Floyd entitled "Facilitating Application of Electrical Safety Best Practices to "Other" Workers" which requested all attendees to review their electrical safety program to assure that non-electrical workers were protected as well as electrical workers. The referenced paper indicated that roughly 50% of electrical incidents involve workers whose primary function is not electrical in nature. It also encouraged all to "address electrical safety for all workers and not just workers whose job responsibilities involve working on or near energized electrical circuits." In this paper, a program which includes specific briefings to non-electrical workers as well as to workers who may need to perform their normal activities in proximity to energized electrical conductors is presented. The program uses a targeted approach to specific areas such as welding, excavating, rigging, chart reading, switching, cord and plug equipment and several other general areas to point out hazards that may exist and how to avoid them. NFPA 70E-2004 was incorporated into the program several years ago and with it the need to include the "other" workers became apparent. The site experience over the years supports the assertion that about half of the electrical incidents involve non-electrical workers and this prompted us to develop specific briefings to enhance the knowledge of the non-electrical worker regarding safe electrical practices. The promotion of "May is Electrical Safety Month" and the development of informative presentations which are delivered to the general site population as well as electrical workers have greatly improved the hazards awareness status of the general worker on site.

  3. WOOD MOLASSES IN THE NUTRITION OF RUMINANTS I. ZELENAK K. BODA, J. BUCKO D. JALC T. WALKO I. BESEDA

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    WOOD MOLASSES IN THE NUTRITION OF RUMINANTS I. ZELENAK K. BODA, J. BUCKO D. JALC T. WALKO I. BESEDA of Forestry and Wood Processing, Zvo%n, Czechoslovakia Recently, due to a deficient food and fodder balance. Regarding waste, wood processing by pro- ducts seem to be a practically inexhaustible source of energy food

  4. SCENARIOS FOR MEETING CALIFORNIA'S 2050 CLIMATE GOALS California's Carbon Challenge Phase II Volume I: Non-Electricity Sectors and Overall Scenario Results

    E-Print Network [OSTI]

    Wei, Max

    2014-01-01T23:59:59.000Z

    II Volume I: Non-Electricity Sectors and Overall ScenarioElectricity Sector Conditions Assumed for Electricity Sector and Building

  5. Friction of wood on steel.

    E-Print Network [OSTI]

    Koubek, Radek

    2014-01-01T23:59:59.000Z

    ?? This thesis deals with the experimental description of friction between steel and wood materials, specifically laminated veneer lumber (LVL) and pine wood with two (more)

  6. Chopwell Wood Health Project

    E-Print Network [OSTI]

    Chopwell Wood Health Project An innovative project of school visits and General Practitioner. The project took place at Chopwell Wood a 360 hectare mixed woodland managed by the Forestry Commission to carry on being involved in the project. Next stage of the project Although the project leader has now

  7. Marcelo A. Wood Marcelo A. Wood, Ph.D.

    E-Print Network [OSTI]

    Wood, Marcelo A.

    Marcelo A. Wood 1 Marcelo A. Wood, Ph.D. Curriculum Vitae June, 2013 Current Appointment: Associate, University of California, Irvine #12;Marcelo A. Wood 2 Teaching Experience: since joining UCI 2006, American College of Neuropsychopharmacology (ACNP) #12;Marcelo A. Wood 3 Journal/Editorial Review Service

  8. WOOD ANATOMY INSTRUCTIONS FOR LABORATORY

    E-Print Network [OSTI]

    Cufar, Katarina

    WOOD ANATOMY INSTRUCTIONS FOR LABORATORY WORK KATARINA CUFAR, MARTIN ZUPANCIC University of Ljubljana Biotechnical Faculty Department of Wood Science and Technology #12;Publisher Department of Wood The publishing of "Wood Anatomy - Instructions for Laboratory Work", a textbook by Katarina Cufar and Martin

  9. WOOD RESEARCH 53 (4): 2008

    E-Print Network [OSTI]

    Cufar, Katarina

    1 WOOD RESEARCH 53 (4): 2008 1-12 CAMBIAL ACTIVITY AND WOOD FORMATION IN BEECH FAGUS SYLVATICA, Department of Wood Science and Technology, Ljubljana, Slovenia Jozica Griar Slovenian Forestry Institute (Fagus sylvatica), cambium, wood formation, cell differentiation, xylem growth rings, Gompertz function

  10. WOOD RESEARCH 52 (2): 2007

    E-Print Network [OSTI]

    Cufar, Katarina

    1 WOOD RESEARCH 52 (2): 2007 1-10 WOOD FORMATION IN NORWAY SPRUCE PICEA ABIES STUDIED BY PINNING Zupani, Katarina Cufar, Primoz Oven University of Ljubljana, Biotechnical Faculty, Department of Wood methods for examining wood formation. Pinning induced desiccation of differentiated xylem, necrosis

  11. Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels

    E-Print Network [OSTI]

    Utilization of Agricultural WasteUtilization of Agricultural Waste for Composite Panelsfor Composite Panels Chung Y. HseChung Y. Hse Principal Wood ScientistPrincipal Wood Scientist USDA Forest State UniversityLouisiana State University 66thth Pacific Rim BioPacific Rim Bio--Based Composites

  12. James F. Wood

    Broader source: Energy.gov [DOE]

    James F. Wood is currently Deputy Assistant Secretary for Clean Coal in the Office of Fossil Energy (FE). In this position, he is responsible for the management and direction of the Office's...

  13. Wood Heating Fuel Exemption

    Broader source: Energy.gov [DOE]

    This statute exempts from the state sales tax all wood or "refuse-derived" fuel used for heating purposes. The law does not make any distinctions about whether the qualified fuels are used for...

  14. Wood/coal cofiring in industrial stoker boilers

    SciTech Connect (OSTI)

    Cobb, J.T. Jr.; Elder, W.W.; Freeman, M.C.

    1999-07-01T23:59:59.000Z

    Realizing that a significant reduction in the global emissions of fossil carbon dioxide may require the installation of a wide variety of control technologies, options for large and small boilers are receiving attention. With over 1,500 coal-fired stoker boilers in the US, biomass co-firing is of interest, which would also open markets for waste wood which is presently landfilled at significant costs ranging from $20--200/ton. While much cofiring occurs inside the fence, where industrial firms burn wastes in their site boilers, other opportunities exist. Emphasis has been placed on stoker boilers in the northeastern US, where abundant supplies of urban wood waste are generally known to exist. Broken pallets form a significant fraction of this waste. In 1997, the cofiring of a volumetric mixture of 30% ground broken pallet material and 70% coal was demonstrated successfully at the traveling-grate stoker boilerplant of the Pittsburgh Brewing Company. Fourteen test periods, with various wood/coal mixtures blended on site, and two extended test periods, using wood/coal mixtures blended at the coal terminal and transported by truck to the brewery, were conducted. The 30% wood/70% coal fuel was conveyed through the feed system without difficulty, and combusted properly on the grate while meeting opacity requirements with low SO{sub 2} and NO{sub x} emissions. Efforts are underway to commercialize a wood/coal blend at the brewery, to identify specific urban wood supplies in the Pittsburgh region and to conduct a demonstration at a spreader stoker.

  15. Wye Wood: the wider wood : A project description and evaluation page 1 January 2007

    E-Print Network [OSTI]

    Wye Wood: the wider wood : A project description and evaluation page 1 January 2007 Wye Wood: the wider wood A project description and evaluation Report written by: Dr Frances Howie Associate Director Parrott Health Development Worker, Wye Wood: the wider wood #12;Wye Wood: the wider wood : A project

  16. Waste wood processing and combustion for energy

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    This volume contains the proceedings of the Fifth Annual National Biofuels Conference and Exhibition held October 19--22, 1992 in Newton, Massachusetts. Individual papers have been abstracted and indexed for the database.

  17. Precision wood particle feedstocks

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2013-07-30T23:59:59.000Z

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  18. Marketing of Tropical Hardwood Wood Products from Ghana

    E-Print Network [OSTI]

    productive · Causes: farming, bush fires, fuel wood, wasteful logging practices, mining and quarrying #12;Fuelwood #12;Current Industry Structure · 8% of GDP · 250 companies involved in primary operations · 180 companies in secondary operations · Over 200 companies involved in tertiary operations · General

  19. Pellet Production Wood Pellets are made by compressing

    E-Print Network [OSTI]

    Pellet Production Wood Pellets are made by compressing clean dry sawdust, under very high pressure into a pellet as it cools. The material used for producing pellets usually comes from industries who are already pellets reduces the volume of material they have to treat as waste, reducing landfill. Pellets have

  20. Inaugural 2012 Kristie Ann Wood

    E-Print Network [OSTI]

    Alpay, S. Pamir

    Inaugural 2012 Kristie Ann Wood Scholarship Award Call for Nominations We are delighted to announce the Inaugural 2012 Kristie Ann Wood Scholarship Award for an Outstanding Women's, Gender, and Sexualities (WGSS Wood, a feminist mother, wife, friend, daughter, and lawyer who is remembered by her loved ones

  1. April, 2006 Allen W. Wood

    E-Print Network [OSTI]

    Zalta, Edward N.

    1 April, 2006 Vita Allen W. Wood Academic Address: Philosophy Department, Bldg 90 Stanford University Stanford, CA 94305-2155 Telephone 650-723-2587 Fax 650-723-0985 E-mail: Allen.Wood University, 1999-2000. Professor of Philosophy, Stanford University, 1999-2001 Ward W. and Priscilla B. Woods

  2. Environmental Impacts of Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Environmental Impacts of Treated Wood 6495_C000.fm Page iii Wednesday, February 1, 2006 5:48 PM #12 of treated-wood research and their efforts in organizing the con- ference entitled Environmental Impacts, "Environmental Impacts of Treated Wood", the conference proceedings which served as a starting point

  3. Rheological Model for Wood

    E-Print Network [OSTI]

    Mohammad Masoud Hassani; Falk K. Wittel; Stefan Hering; Hans J. Herrmann

    2014-10-15T23:59:59.000Z

    Wood as the most important natural and renewable building material plays an important role in the construction sector. Nevertheless, its hygroscopic character basically affects all related mechanical properties leading to degradation of material stiffness and strength over the service life. Accordingly, to attain reliable design of the timber structures, the influence of moisture evolution and the role of time- and moisture-dependent behaviors have to be taken into account. For this purpose, in the current study a 3D orthotropic elasto-plastic, visco-elastic, mechano-sorptive constitutive model for wood, with all material constants being defined as a function of moisture content, is presented. The corresponding numerical integration approach, with additive decomposition of the total strain is developed and implemented within the framework of the finite element method (FEM). Moreover to preserve a quadratic rate of asymptotic convergence the consistent tangent operator for the whole model is derived. Functionality and capability of the presented material model are evaluated by performing several numerical verification simulations of wood components under different combinations of mechanical loading and moisture variation. Additionally, the flexibility and universality of the introduced model to predict the mechanical behavior of different species are demonstrated by the analysis of a hybrid wood element. Furthermore, the proposed numerical approach is validated by comparisons of computational evaluations with experimental results.

  4. Review and Status of Solid Waste Management Practices in Multan, Pakistan

    E-Print Network [OSTI]

    Shoaib, Muhammad; Mirza, Umar Karim; Sarwar, Muhammad Avais

    2006-01-01T23:59:59.000Z

    Bones Metals Textile Wood Composting Community Developmentestablished a solid waste composting plant as a theme ofwaste sorting and composting plant, which was manufactured

  5. Balsa Wood Bridge Competition Sponsored by

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    Balsa Wood Bridge Competition Sponsored by: The University of Tennessee, Department of Civil only of BALSA WOOD and ELMER'S WOOD GLUE. No other materials will be accepted. The balsa wood must be no larger than ¼" high and ¼" wide. Any dowels can not have a diameter greater than ¼". Balsa wood comes

  6. SOME POV-RAY TEXTURES AND COLORS T_Wood1 to T_Wood35

    E-Print Network [OSTI]

    Lee, Carl

    SOME POV-RAY TEXTURES AND COLORS WOODS.INC T_Wood1 to T_Wood35 STONES.INC T_Stone1 to T_Stone44Pink DarkPurple NeonBlue CoolCopper MandarinOrange LightWood MediumWood DarkWood SpicyPink Semi

  7. DIVISION 6 -WOOD AND PLASTICS 06000 GENERAL

    E-Print Network [OSTI]

    DIVISION 6 - WOOD AND PLASTICS ________________________________________________________________________ 06000 GENERAL 1. For both woods and plastics, special attention is called to matters of flame spread-dried. 3. For exterior wood or plastic framed structures, see Division 4 for dimensions of Sample Panel

  8. WRITTEN TESTIMONY OF DR. ROBERT J. WOOD

    E-Print Network [OSTI]

    WRITTEN TESTIMONY OF DR. ROBERT J. WOOD DIRECTOR OF THE COOPERATIVE OXFORD LABORATORY NATIONAL Robert Wood, Director of the Cooperative Oxford Laboratory, a cooperative scientific research laboratory

  9. The Asian Wood Pellet Markets

    E-Print Network [OSTI]

    The Asian Wood Pellet Markets Joseph A. Roos and Allen M. Brackley United States Department Wood Pellet plant in North Pole, Alaska. Clockwise from upper left: pelleting machine; pellets bagged for home use; a Superior Pellet Fuels bag; inventory of product ready for shipment to retailers. Upper

  10. GLOBAL WOOD SUPPLY Sten Nilsson

    E-Print Network [OSTI]

    GLOBAL WOOD SUPPLY Sten Nilsson Biomass and Resource Efficiency: the need for a supply led approach to forest productivity European Parliament, Brussels, 10 November 2011 #12;MEGATREND WOOD SUPPLY 2020 the trees on the right Source: JP Management Consulting (Asia-Pacific) Ltd., 2006 #12;BAMBOO FOREST Source

  11. Wood and Pellet Heating Basics | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste and Materials Disposition InformationWindWood and Pellet Heating Basics

  12. Wood River Levee Reconstruction, Madison County, IL

    E-Print Network [OSTI]

    US Army Corps of Engineers

    Wood River Levee Reconstruction, Madison County, IL 25 October 2006 Abstract: The recommended plan provides for flood damage reduction and restores the original degree of protection of the Wood River Levee-federal sponsor is the Wood River Drainage and Levee District. The Wood River Levee System was authorized

  13. Original article Growth stresses in tension wood

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article Growth stresses in tension wood: role of microfibrils and lignification T Okuyama the growth stress generation in the region of normal and tension woods. growth stress/ tension wood in normal and ten- sion wood. The compressive stress from the deposition of lignin controls the level

  14. Successful biomass (wood pellets ) implementation in

    E-Print Network [OSTI]

    Successful biomass (wood pellets ) implementation in Estonia Biomass Utilisation of Local of primary energy in Estonia ! Wood fuels production ! Pellet firing projects in Estonia ­ SIDA Demo East Production of wood fuels in Estonia in 2002 Regional Energy Centres in Estonia Wood pellets production

  15. Friedman et al. on Eagly & Wood ...1059 Kenrick & Li on Eagly & Wood ......1060

    E-Print Network [OSTI]

    Pillow, Jonathan

    Comment Contents Friedman et al. on Eagly & Wood ...1059 Kenrick & Li on Eagly & Wood ......1060 Kleyman on Eagly & Wood ............ 1061 Wood & Eagly reply ....................... 1062 Chan on Peng J. Scheyd University of Texas at Austin Eagly and Wood (June 1999) argued that social structural

  16. Companies commit to eliminate dodgy wood products Companies commit to eliminate dodgy wood products

    E-Print Network [OSTI]

    Companies commit to eliminate dodgy wood products Companies commit to eliminate dodgy wood products wood products only from sustainable managed sources. Canadian paper, pulp and wood company Domtar has. "Companies that seriously commit to responsible wood sourcing can have significant positive impacts on forest

  17. UTILIZATION OF ALASKAN SALMON CANNERY WASTE

    E-Print Network [OSTI]

    UTILIZATION OF ALASKAN SALMON CANNERY WASTE Marine Biological Laboratory iM0V3Ul953 WOODS HOLE and Wildlife Service, John L. Farley, Director UTILIZATION OP ALASKM SALMON CANlTEaT WASH PAHTS I AHD II, September 1953 #12;#12;UTILIZATION OF AUSKAN SALMON CANNERY WASTE y PART I 1. Possibility of Development

  18. Structure-Infesting Wood-Boring Beetles

    E-Print Network [OSTI]

    Jackman, John A.

    2006-03-28T23:59:59.000Z

    everal kinds of beetles damage stored wood, structural timbers and other wood products. The tunneling activities E-394 03/06 Structure-Infesting Wood-Boring Beetles John A. Jackman* S *Professor and Extension Entomologist, The Texas A... at these locations. Other signs of an infestation include stained wood or a blistering appearance on the wood surface caused by larvae tunneling just below the surface. Less commonly, immature beetles produce audible rasping or ticking sounds while chewing...

  19. Integrated Industrial Wood Chip Utilization

    E-Print Network [OSTI]

    Owens, E. T.

    1984-01-01T23:59:59.000Z

    The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

  20. Treatment of Wood Preserving Wastewater

    E-Print Network [OSTI]

    Reynolds, T. D.; Shack, P. A.

    The wastewater produced by the wood preserving industry presents a difficult problem to treat economically. A review of the literature indicates the size of the industry has limited the pursuit of an orderly and economic solution. Atmospheric...

  1. Textile Drying Via Wood Gasification

    E-Print Network [OSTI]

    McGowan, T. F.; Jape, A. D.

    1983-01-01T23:59:59.000Z

    TEXTILE DRYING VIA WOOD GASIFICATION Thomas F. ;McGowan, Anthony D. Jape Georgia Institute of Technology Atlanta, Georgia ABSTRACT This project was carried out to investigate the possibility of using wood gas as a direct replacement... for dryers. In addition to the experimental program described above, the DOE grant covered two other major areas. A survey of the textile industry was made to assess the market for gasification equip ment. The major findings were that a large amount...

  2. Coextruded Polyethylene and Wood-Flour Composite: Effect of Shell Thickness, Wood Loading, and Core

    E-Print Network [OSTI]

    Coextruded Polyethylene and Wood-Flour Composite: Effect of Shell Thickness, Wood Loading, and Core recycled polyethylene and wood-flour composites with core­shell structure were manufactured using a pilot

  3. Radioactive Waste Radioactive Waste

    E-Print Network [OSTI]

    Slatton, Clint

    #12;Radioactive Waste at UF Bldg 831 392-8400 #12;Radioactive Waste · Program is designed to;Radioactive Waste · Program requires · Generator support · Proper segregation · Packaging · labeling #12;Radioactive Waste · What is radioactive waste? · Anything that · Contains · or is contaminated

  4. Robert Wood, University of Washington many contributors

    E-Print Network [OSTI]

    Wood, Robert

    Robert Wood, University of Washington many contributors VOCALS Education and Outreach Snider (Wyoming) · Dave Spencer (NCSU) · Cindy Twohy (OSU) · Rob Wood/Chris Bretherton/Rhea George

  5. Marin County- Wood Stove Replacement Rebate Program

    Broader source: Energy.gov [DOE]

    The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and fireplace inserts) with cleaner burning stoves...

  6. Decreasing the leachibility of boron wood preservatives

    E-Print Network [OSTI]

    Gezer, Engin Derya

    1996-01-01T23:59:59.000Z

    The use of boron in wood preservatives has been growing since the 1930s, primarily in various boric acid/borax mixtures. Boron preservatives have several advantages for application as wood preservatives including a broad spectrum of activity...

  7. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-01-W America's Least Wanted Wood-Borers Department of Entomology OAK. Ferris, Entomologists This metallic wood-boring beetle (Family Bupresti- dae) primarily attacks oaks. Oak wood- borers. Distribution: The native geographical range of this beetle includes parts of Asia, Africa

  8. STACY L. WOOD Department of Marketing wood@moore.sc.edu

    E-Print Network [OSTI]

    Reif, John H.

    STACY L. WOOD Department of Marketing wood@moore.sc.edu Moore School of Business ph. (803) 777) Alba, Joseph, John Lynch, Barton Weitz, Chris Janiszewski, Richard Lutz, Alan Sawyer, Stacy Wood (1997, September-October 1996, p. 12. Wood, Stacy L. (2001), "Remote Purchase Environments: The Influence of Return

  9. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-07-W America's Least Wanted Wood-Borers Department of Entomology JAPANESE. Pupation takes place in the wood and adults emerge by chewing a round exit hole. Adults feed on the tender) #12;2Wood Borer -- WB-07-W October 2012 It is the policy of the Purdue University Cooperative

  10. Wood density measurement protocol J Chave Page 1 Measuring wood density for tropical forest trees

    E-Print Network [OSTI]

    Chave, Jérôme

    Wood density measurement protocol ­ J Chave Page 1 Measuring wood density for tropical forest trees Diversité Biologique Université Paul Sabatier 31000 Toulouse, France 1. Introduction Wood is a biological, that transport the sap along the stem and they are filled by water. The density of tree wood is an interesting

  11. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-06-W America's Least Wanted Wood-Borers Department of Entomology CAMPHOR August. Female beetles make a horizontal tunnel in the wood initiating gallery construction where/APHIS grant number 10-8100-1488-CA. #12;2Wood Borer -- WB-06-W October 2012 It is the policy of the Purdue

  12. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-08-W America's Least Wanted Wood-Borers Department of Entomology OAK, these beetles feed on oak (Quercus spp). Direct damage results from galleries in the wood that are formed in the breeding season. The host trees for these beetles are important for the wood indus- try, orna

  13. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-09-W America's Least Wanted Wood-Borers Department of Entomology EUROPEAN trees are very crucial for the wood industry, ornamental industry and many species of wildlife: The beetles construct the egg gal- leries perpendicular to the grain of the wood which can be found under

  14. School of Biological Sciences Juvenile wood

    E-Print Network [OSTI]

    School of Biological Sciences Juvenile wood What is it and why should we be concerned? #12;School of Biological Sciences What is juvenile wood? A brief recap. There is no universally accepted definition of juvenile wood. It is typically described as follows · zone near to the pith · displays marked

  15. c Copyright 2014 Benjamin P. Wood

    E-Print Network [OSTI]

    Anderson, Richard

    c Copyright 2014 Benjamin P. Wood #12;#12;Software and Hardware Support for Data-Race Exceptions Benjamin P. Wood A dissertation submitted in partial fulfillment of the requirements for the degree;#12;University of Washington Abstract Software and Hardware Support for Data-Race Exceptions Benjamin P. Wood Co

  16. Generating Textures of New Zealand Native Wood

    E-Print Network [OSTI]

    Goodman, James R.

    1 Generating Textures of New Zealand Native Wood Jack Wang Abstract - This report explores algorithms for computer generated textures simulating New Zealand native wood, we out line procedural and Ray tracing. The main goal of this research is to study New Zealand native wood in depth and to gather

  17. Updated 1-12 Bryan H. Wood

    E-Print Network [OSTI]

    Updated 1-12 Bryan H. Wood UNITED STATES MARINE CORPS DIRECTOR, PACIFIC DIVISION PLANS, POLICIES, OPERATIONS DEPARTMENT U.S. Marine Corps Mr. Bryan H. Wood is the Director, Pacific Division under the Deputy-Japan International Agreement. Mr. Wood was appointed to his current position in 2010 following 24 years

  18. SOLID WOOD PRODUCTS EFFECTS OF ELEVATED AND

    E-Print Network [OSTI]

    SOLID WOOD PRODUCTS EFFECTS OF ELEVATED AND HIGH-TEMPERATURE SCHEDULES ON NARP IN SOUTHERN YELLOW-temperature (ET) from ET and HT schedules. and a high-temperature (HT) schedule. Wood properties including juvenile wood content, density, ring count, largest knot area, presence of pith, moisture content

  19. Wood Laminated Composite Louisiana Forest Product Lab

    E-Print Network [OSTI]

    Wood Laminated Composite Poles Cheng Piao Louisiana Forest Product Lab School of Renewable Natural, in accordance with CSA O15, ANSI 05 and many other international standards #12;Wood Laminated Composite Poles y, v z, w R r x, u #12;Why Wood Composite Poles · Sufficient strength · More cost-effective · Light

  20. Optical computing Damien Woods a

    E-Print Network [OSTI]

    Woods, Damien

    Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract We consider optical computers that encode data using images and compute by transforming such images. We give an overview of a number of such optical

  1. Optical computing Damien Woods a

    E-Print Network [OSTI]

    Woods, Damien

    Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract In this survey we consider optical computers of such optical computing archi- tectures, including descriptions of the type of hardware commonly used in optical

  2. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  3. Cultural Values of Trees, Woods

    E-Print Network [OSTI]

    research into the importance of the cultural values of trees, woods and forests for sustainable forest managers have to take account of cultural values as one of the central themes of Sustainable Forest and taking them into account as part of the processes of planning and decisionmaking. Cultural values

  4. Wood-Composites Industry Benefits from ALS Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWindDownloadsWood and Pellet

  5. Wood-Composites Industry Benefits from ALS Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun DengWISPWindDownloadsWood and

  6. Measuring bulky waste arisings in Hong Kong

    SciTech Connect (OSTI)

    Chung Shanshan, E-mail: sschung@hkbu.edu.h [Croucher Institute for Environmental Sciences, Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong); Lau, Ka-yan Winifred; Zhang Chan [Croucher Institute for Environmental Sciences, Department of Biology, Hong Kong Baptist University, Kowloon Tong (Hong Kong)

    2010-05-15T23:59:59.000Z

    All too often, waste authorities either assume that they know enough about their bulky waste stream or that it is too insignificant to deserve attention. In this paper, we use Hong Kong as an example to illustrate that official bulky waste figures can actually be very different from the reality and therefore important waste management decisions made based on such statistics may be wrong too. This study is also the first attempt in Hong Kong to outline the composition of bulky waste. It was found that about 342 tonnes/day of wood waste were omitted by official statistics owing to incomplete records on actual bulky waste flow. This is more than enough to provide all the feedstock needed for one regular-sized wood waste recycling facility in Hong Kong. In addition, the proportion of bulky waste in the municipal solid waste (MSW) streams in Hong Kong should be about 6.1% instead of the officially stated 1.43%. Admittedly, there are limitations with this study. Yet, present findings are suggestive of significant MSW data distortion in Hong Kong.

  7. Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies

    SciTech Connect (OSTI)

    Auburn Machinery, Inc.

    2004-07-15T23:59:59.000Z

    This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

  8. URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT

    SciTech Connect (OSTI)

    James T. Cobb Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

    2004-04-08T23:59:59.000Z

    An Environmental Questionnaire for the demonstration at the Bellefield Boiler Plant (BBP) was submitted to the national Energy Technology Laboratory. An R&D variance for the air permit at the BBP was sought from the Allegheny County Health Department (ACHD). R&D variances for the solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS) were sought from the Pennsylvania Department of Environmental Protection (PADEP). Construction wood was acquired from Thompson Properties and Seven D Corporation. Verbal authorizations were received in all cases. Memoranda of understanding were executed by the University of Pittsburgh with BBP, JARC and ETS. Construction wood was collected from Thompson Properties and from Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were hammer milled at ETS and half of the product delivered to MVTC. Blends of wood and coal, produced at MVTC by staff of JARC and MVTC, were shipped by rail to BBP. The experimental portion of the project was carried out at BBP in late March and early April 2001. Several preliminary tests were successfully conducted using blends of 20% and 33% wood by volume. Four one-day tests using a blend of 40% wood by volume were then carried out. Problems of feeding and slagging were experienced with the 40% blend. Light-colored fly ash was observed coming from the stack during all four tests. Emissions of SO{sub 2}, NOx and total particulates, measured by Energy Systems Associates, decreased when compared with combusting coal alone. A procedure for calculating material and energy balances on BBP's Boiler No.1 was developed, using the results of an earlier compliance test at the plant. Material and energy balances were then calculated for the four test periods. Boiler efficiency was found to decrease slightly when the fuel was shifted from coal to the 40% blend. Neither commercial production of sized urban waste wood for the energy market in Pittsburgh nor commercial cofiring of wood/coal blends at BBP are anticipated in the near future.

  9. California Wood Energy Program1 Gary Brittner2

    E-Print Network [OSTI]

    Standiford, Richard B.

    California Wood Energy Program1 Gary Brittner2 The California Department of Forestry Wood Energy projects to increase utilization of wood for energy. The Wood Energy Program came about partly the management of the wood resource. The Department of Forestry recognized that an extensive resource

  10. One on One- Douglas K Woods

    Broader source: Energy.gov [DOE]

    A September 2014 interview with Douglas K Woods, the President of the Association for Manufacturing Technology, on the state of US manufacturing.

  11. 1Wood Borer --WB-XX-W America's Least Wanted Wood-Borers

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-05-W America's Least Wanted Wood-Borers Department of Entomology ASIAN) #12;1-888-EXT-INFO · www.extension.purdue.edu 2Wood Borer -- WB-05-W October 2012 It is the policy

  12. WoodPolymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood

    E-Print Network [OSTI]

    Wood­Polymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood Yong-Feng Li in Wiley Online Library (wileyonlinelibrary.com). ABSTRACT: Wood­polymer composites (WPCs) were prepared words: composites; mechanical properties; modifi- cation; monomers; renewable resources INTRODUCTION

  13. Department of Forest and Wood Science Academic Programmes for 2014

    E-Print Network [OSTI]

    Geldenhuys, Jaco

    Department of Forest and Wood Science Academic Programmes for 2014 Postgraduate Diploma Enquiries: Head of Department Contact details: Department of Forest and Wood Science Stellenbosch University;Department of Forest and Wood Science - 2012 2 Contents: Postgraduate Programmes Postgraduate Diploma

  14. Daniel Wood | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergy DOE Theory9-9260-2003October 02,(JulyWebinar: IRSofDanDaniel Wood

  15. PPPO-02-427-07 Revised Solid Waste Management Unit Assessment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Area for Concrete Piers, Rubble, and Wood on the North Side of C-745-B Cylinder Yard Solid Waste Management Unit Assessment Report UNIT NUMBER: 548 DATE OF ORIGINAL SAR: 627...

  16. automatic wood furnaces: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    pressure differences that included standard rating points 11 Wood Products 201213 Student Handbook Environmental Sciences and Ecology Websites Summary: Wood Products 201213 Student...

  17. Autonomy for Aurora's Mars Missions Mark Woods,

    E-Print Network [OSTI]

    Fisher, Michael

    Autonomy for Aurora's Mars Missions Mark Woods, SciSys Ltd., Clothier Road, Bristol, UK BS4 5SS Email: mark.woods@scisys.co.uk Tel: +44 117 9717251 ESA's Aurora programme incorporates a strategy for European involvement in future robotic and human exploration of our Solar System. The Aurora roadmap calls

  18. FAO Forestry Department Wood Energy WISDOM Slovenia

    E-Print Network [OSTI]

    as their relevance in forestry, energy and rural development contexts, woody biomass is an important resource thatFAO ­ Forestry Department ­ Wood Energy WISDOM ­ Slovenia Spatial woodfuel production Rudi Drigo Forestry Specialist - Wood energy planning and forest resources monitoring Zivan Veseli

  19. Genotoxicity profiles during KPEG dehalogenation of wood preserving waste

    E-Print Network [OSTI]

    Hong, Marjorie S

    1994-01-01T23:59:59.000Z

    ivas fouii?l to be effective for treatment of soils containinated ivith PCBs (Aroclor 1242, 1248, 1200); polychlorinated triphenyls; 2, 4-di-. 2, 4, 1-tri- and 2. 3. 7. 8-tetrachlorodibenzo-p- dioxins; and siniilar compounds. Dev ?I al. (1?J89... array emplaced in bore holes drilled through the soil for energy deposition. Although no combined studes of in s?t?& RF heating-enhanced KPEG decontaiuination v&ere performed, the preliminary couclusion inade ivas that the treatment may...

  20. Cofiring waste biofuels and coal for emissions reduction

    SciTech Connect (OSTI)

    Brouwer, J.; Owens, W.D.; Harding, N.S. [Reaction Engineering International, Salt Lake City, UT (United States)] [and others

    1995-11-01T23:59:59.000Z

    Combustion tests have been performed in two pilot-scale combustion facilities to evaluate the emissions reduction possible while firing coal blended with several different biofuels. Two different boiler simulations, pulverized coal fired boilers and stoker coal fired boilers, were simulated. The pc-fired studies investigated the use of waste hardwood and softwood with pulverized coal, or using the biofuels as potential reburning fuels. The use of these wood waste is attractive because: wood contains little nitrogen and virtually no sulfur; wood is a regenerable biofuel; and wood utilization results in a net reduction in CO{sub 2} emissions. The wood reburning results indicate a reduction of 50-60% NO with approximately 10% wood heat input. Reburn stoichiometry was the most important variable. The NO reduction was strongly dependent upon initial NO and only slightly dependent upon temperature and wood moisture content. Cofiring of wood with pulverized coal; however, did not lead to significant NO reductions with the current NO{sub x} burner configuration. The stoker program investigated barriers for the successful blending of coal with waste railroad ties. Parameters evaluated included blending firing rate, chip size, optimum feed location, overfire/underfire air ratio, and natural gas addition. The results of this study demonstrate that NO emissions can be reduced by more than 50% without any significant increase in CO or THC emissions by the proper use of zoned reburning. Both programs demonstrated several benefits of biofuel cofiring, including: (1) lower operating costs due to reduced fuel prices; (2) reduced waste disposal; (3) reduced maintenance costs; (4) reduced environmental costs; and (5) extension of the useful life of existing equipment.

  1. Energy implications of the thermal recovery of biodegradable municipal waste materials in the United Kingdom

    SciTech Connect (OSTI)

    Burnley, Stephen, E-mail: s.j.burnley@open.ac.uk [Open University, Walton Hall, Milton Keynes MK7 6AA (United Kingdom); Phillips, Rhiannon, E-mail: rhiannon.jones@environment-agency.gov.uk [Strategy Unit, Welsh Assembly Government, Ty Cambria, 29 Newport Road, Cardiff CF24 0TP (United Kingdom); Coleman, Terry, E-mail: terry.coleman@erm.com [Environmental Resources Management Ltd, Eaton House, Wallbrook Court, North Hinksey Lane, Oxford OX2 0QS (United Kingdom); Rampling, Terence, E-mail: twa.rampling@hotmail.com [7 Thurlow Close, Old Town Stevenage, Herts SG1 4SD (United Kingdom)

    2011-09-15T23:59:59.000Z

    Highlights: > Energy balances were calculated for the thermal treatment of biodegradable wastes. > For wood and RDF, combustion in dedicated facilities was the best option. > For paper, garden and food wastes and mixed waste incineration was the best option. > For low moisture paper, gasification provided the optimum solution. - Abstract: Waste management policies and legislation in many developed countries call for a reduction in the quantity of biodegradable waste landfilled. Anaerobic digestion, combustion and gasification are options for managing biodegradable waste while generating renewable energy. However, very little research has been carried to establish the overall energy balance of the collection, preparation and energy recovery processes for different types of wastes. Without this information, it is impossible to determine the optimum method for managing a particular waste to recover renewable energy. In this study, energy balances were carried out for the thermal processing of food waste, garden waste, wood, waste paper and the non-recyclable fraction of municipal waste. For all of these wastes, combustion in dedicated facilities or incineration with the municipal waste stream was the most energy-advantageous option. However, we identified a lack of reliable information on the energy consumed in collecting individual wastes and preparing the wastes for thermal processing. There was also little reliable information on the performance and efficiency of anaerobic digestion and gasification facilities for waste.

  2. Disposal of CCA-treated Wood: An Evaluation of

    E-Print Network [OSTI]

    Florida, University of

    Disposal of CCA-treated Wood: An Evaluation of Existing and Alternative Management Options (FINAL CHARACTERISTICS OF CCA-TREATED WOOD ASH II.1 Sample Preparation 10 II.2 Laboratory Methods 15 II.3 Laboratory Results 24 CHAPTER III, SORTING TECHNOLOGIES FOR SEPARATING TREATED WOOD FROM UNTREATED WOOD III.1

  3. Wood Products Marketing And Value-Added Opportunities

    E-Print Network [OSTI]

    Wood Products Marketing And Value-Added Opportunities Richard Vlosky, Ph.D. Professor, R.E. Taylor & Associates Ltd. Forest Industry Strategic Services & Publisher: WOOD Markets Monthly newsletter WOOD Markets 2002 - The Solid Wood Products Outlook. #501 - 543 Granville Street Vancouver, B

  4. ORIGINAL PAPER M. Grosell C.M. Wood

    E-Print Network [OSTI]

    Grosell, Martin

    ORIGINAL PAPER M. Grosell á C.M. Wood Branchial versus intestinal silver toxicity and uptake Hogstrand and Wood 1998; Wood et al. 1999 for reviews), much less is known about the exact toxic mechanisms primarily through the apical Na+ channel (Bury and Wood 1999) and targets the basolateral Na/K-AT- Pase

  5. 1Wood Borer --WB-XX-W Department of Entomology

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-02-W Department of Entomology America's Least Wanted Wood-Borers CHINESE under the bark and in dry dead wood and complete their development in two or more years. Adults emerge campestris (Faldermann) (Coleoptera: Cerambycidae), an Asian wood-boring beetle recorded in North America

  6. ALASKAN WOOD FROGS STOCK UP ON SOLUTES TO SURVIVE

    E-Print Network [OSTI]

    Besansky, Nora J.

    Inside JEB i ALASKAN WOOD FROGS STOCK UP ON SOLUTES TO SURVIVE Outwardly, the tiny wood frog, Rana these wood frogs, which are native to Alaska, Canada and the northern USA, to unravel their secrets. Costanzo tolerance in a northern population of the wood frog. J. Exp. Biol. 216, 3461-3473. Nicola Stead THE GENETICS

  7. Original article A study on growth stresses, tension wood

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article A study on growth stresses, tension wood distribution and other related wood variations of wood structure (specific gravity and pulp yield), and the transverse mechanical resistance of wood. To investigate growth stresses, longitudinal displacements after stress release were estimated

  8. Codes of constant Lee or Euclidean weight Jay A. Wood

    E-Print Network [OSTI]

    Wood, Jay

    Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323--2094 USA wood@calumet.purdue.edu http://www.calumet.purdue.edu/public/math/wood Scholarly Research Awards. #12; JAY A. WOOD 1. Linear codes as modules Throughout this extended abstract

  9. Wood of Giant Sequoia: Properties and Unique Characteristics1

    E-Print Network [OSTI]

    Standiford, Richard B.

    Wood of Giant Sequoia: Properties and Unique Characteristics1 Douglas D. Piirto2 Abstract: Wood tree species. Wood properties such as specific gravity, various mechanical properties, extractive be considered for planting stock in managed production forests to increase future supplies of wood having

  10. 1Wood Borer --WB-XX-W Department of Entomology

    E-Print Network [OSTI]

    Ginzel, Matthew

    1Wood Borer -- WB-XX-W WB-04-W Department of Entomology America's Least Wanted Wood-Borers BLACK living trees. The wood- boring larvae cause structural damage that may make the trees susceptible). (Photo credit: Stanislaw Kinelski, Bugwood.org) #12;1-888-EXT-INFO · www.extension.purdue.edu 2Wood Borer

  11. Emerging Markets for Wood Energy Richard Vlosky, Director

    E-Print Network [OSTI]

    · The Louisiana Forest Products Development Center · Wood-to-Energy · Wood Biomass · Energy Options · Current-based Biomass Energy #12;2/20/2014 5 Forest Landowner Opportunities and Challenges The U.S. South is the "wood2/20/2014 1 Emerging Markets for Wood Energy Richard Vlosky, Director Crosby Land & Resources

  12. Environmental-performance research priorities: Wood products. Final report

    SciTech Connect (OSTI)

    NONE

    1998-01-15T23:59:59.000Z

    This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

  13. Wood and Fiber Science, 36(1), 2004, pp. 107118 2004 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wood and Fiber Science, 36(1), 2004, pp. 107­118 2004 by the Society of Wood Science and Technology FORMOSAN SUBTERRANEAN TERMITE RESISTANCE OF BORATE-MODIFIED STRANDBOARD MANUFACTURED FROM SOUTHERN WOOD, but not on termite mortality. Wood species showed no significant effect on the termite resistance. Correlations

  14. Wood and Fiber Science, 37(1), 2005, pp. 95111 2004 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wood and Fiber Science, 37(1), 2005, pp. 95­111 © 2004 by the Society of Wood Science and Technology SURFACE AND INTERFACIAL CHARACTERIZATION OF WOOD-PVC COMPOSITE: IMAGING MORPHOLOGY AND WETTING wetting behavior of wood-PVC composites in this study. Two-dimensional and time-dependent profiles

  15. Wood and Fiber Science, 36(1), 2004, pp. 1725 2004 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wang, Siqun

    Wood and Fiber Science, 36(1), 2004, pp. 17­25 2004 by the Society of Wood Science and Technology FUNDAMENTALS OF VERTICAL DENSITY PROFILE FORMATION IN WOOD COMPOSITES. PART III. MDF DENSITY FORMATION DURING of Wood Science and Forest Products 210 Cheatham Hall, Virginia Tech Blacksburg, VA 24061-0323 and Timothy

  16. Wood and Fiber Science, 35(4), 2003, pp. 482498 2003 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wood and Fiber Science, 35(4), 2003, pp. 482­498 2003 by the Society of Wood Science and Technology. INTRODUCTION Strength properties of wood-based compos- ites are related to mean panel density and the density of the average panel density (Kruse et al. 2000). Modeling for the spatial structure of wood composites

  17. Wood and Fiber Science, 37(2), 2005, pp. 207212 2005 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Lachenbruch, Barbara

    Wood and Fiber Science, 37(2), 2005, pp. 207­212 © 2005 by the Society of Wood Science. Leichti Associate Professor and Barbara L. Gartner Professor Department of Wood Science and Engineering purposes that characterize smaller sections of wood. Moreover, theASTM standards spec- ify loading

  18. Wood and Fiber Science, 35(3), 2003, pp. 381396 2003 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wood and Fiber Science, 35(3), 2003, pp. 381­396 2003 by the Society of Wood Science and Technology a feasible application of both methods in wood composite research and in a real-time quality control system wood composites widely 1 This paper (NO: 02-40-0457) is published with the approval of the Director

  19. Wood and Fiber Science, 36(1), 2004, pp. 7183 2004 by the Society of Wood Science and Technology

    E-Print Network [OSTI]

    Wood and Fiber Science, 36(1), 2004, pp. 71­83 2004 by the Society of Wood Science and Technology (Lenth and Kamke 1996). Interest in predicting the consolidation be- havior of wood strand mats has led that strand geometry affects the relative void volume in a mat. #12;72 WOOD AND FIBER SCIENCE, JANUARY 2004, V

  20. North American wood markets hit by United States housing crash North American wood markets hit by United States housing crash

    E-Print Network [OSTI]

    themes were: 1. softwood market developments, and 2. wood energy and wood mobilization. The main use of wood for energy throughout the UNECE region, driven by policy measures and high oil prices development, which will have to try to balance the needs of the established wood products sector and the bio-energy

  1. Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model

    SciTech Connect (OSTI)

    Liang Sai [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); Zhang, Tianzhu, E-mail: zhangtz@mail.tsinghua.edu.cn [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); Xu Yijian [School of Environment, State Key Joint Laboratory of Environment Simulation and Pollution Control, Tsinghua University, Beijing 100084 (China); China Academy of Urban Planning and Design, Beijing 100037 (China)

    2012-03-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer Using crop straws and wood wastes for paper production should be promoted. Black-Right-Pointing-Pointer Bagasse and textile waste recycling should be properly limited. Black-Right-Pointing-Pointer Imports of scrap paper should be encouraged. Black-Right-Pointing-Pointer Sensitivity analysis, uncertainties and policy implications are discussed. - Abstract: Waste recycling for paper production is an important component of waste management. This study constructs a physical input-output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China's paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment.

  2. Wood-Burning Heating System Deduction

    Broader source: Energy.gov [DOE]

    This statute allows individual taxpayers a deduction for the purchase and installation of a wood-burning heating system. The deduction is equal to the total cost of purchase and installation for...

  3. From the Woods to the Refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2DBuilding Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University

  4. Residential Wood Heating Fuel Exemption (New York)

    Broader source: Energy.gov [DOE]

    New York exempts retail sales of wood used for residential heating purposes from the state sales tax. The law also permits local governments (municipalities and counties) to grant an exemption from...

  5. Wood Fired Steam Plants in Georgia

    E-Print Network [OSTI]

    Bulpitt, W. S.

    1983-01-01T23:59:59.000Z

    suppliers. Based upon the designs submitted and subsequent negotiations, the Applied Engineering Company (APCO) in Orangeburg, South Carolina, was chosen to do the job. Applied Engineering has been working on wood gasification systems for several years...-20, 1983 company has a large manufacturing plant in Orange burg and is fully capable of fabricating large pressure vessels and heavy industrial equipment. The overall wood gasification system is shown in Figure 1. The fuel for the gasifier is green...

  6. A Wood-Fired Gas Turbine Plant

    E-Print Network [OSTI]

    Powell, S. H.; Hamrick, J. T.

    A WOOD-FIRED GAS TURBINE PLANT Sam H. Powell, Tennessee Valley Authority, Chattanooga, Tennessee Joseph T. Hamrick, Aerospace Research Corporation, RBS Electric, Roanoke, VA Abstract This paper covers the research and development of a wood...-fired gas turbine unit that is used for generating electricity. The system uses one large cyclonic combustor and a cyclone cleaning system in series to provide hot gases to drive an Allison T-56 aircraft engine (the industrial version is the 50l-k). A...

  7. Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood

    E-Print Network [OSTI]

    Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood.2 million cubic meters) of lumber treated with CCA are produced annually in the United States (Micklewright 1998). ·In 1997, for example, some 581.4 million cu. ft. was treated with waterborne preservatives

  8. European Panel FederationEuropean Panel Federation viewpoint on wood energy policiesviewpoint on wood energy policies

    E-Print Network [OSTI]

    --called "green energy"called "green energy" ·· Simultaneously, the taxes on the use of fossil fuelsSimultaneously, the taxes on the use of fossil fuels increaseincrease ·· This leads to increasing costs for wood productsIncreasing use of wood for energy production ·· Governments in Europe are granting subsidies for

  9. Daniel Wood | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005Department ofDOE AccidentWaste Isolation Pilotat4DoublesDaniel

  10. Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste

    E-Print Network [OSTI]

    Tsien, Roger Y.

    waste (i.e, mixture of biohazardous and chemical or radioactive waste), call Environment, Health2/2009 Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste Description Biohazard symbol Address: UCSD 200 West Arbor Dr. San Diego, CA 92103 (619

  11. Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites

    SciTech Connect (OSTI)

    Thompson, David N.; Emerick, Robert W.; England, Alfred B.; Flanders, James P.; Loge, Frank J.; Wiedeman, Katherine A.; Wolcott, Michael P.

    2010-03-31T23:59:59.000Z

    In this project, we proposed to produce wood fiber reinforced thermoplastic composites (WFRTCs) using microbial thermoplastic polyesters in place of petroleum-derived plastic. WFRTCs are a rapidly growing product area, averaging a 38% growth rate since 1997. Their production is dependent on substantial quantities of petroleum based thermoplastics, increasing their overall energy costs by over 230% when compared to traditional Engineered Wood Products (EWP). Utilizing bio-based thermoplastics for these materials can reduce our dependence on foreign petroleum. We have demonstrated that biopolymers (polyhydroxyalkanoates, PHA) can be successfully produced from wood pulping waste streams and that viable wood fiber reinforced thermoplastic composite products can be produced from these materials. The results show that microbial polyester (PHB in this study) can be extruded together with wastewater-derived cell mass and wood flour into deck products having performance properties comparable to existing commercial HDPE/WF composite products. This study has thus proven the underlying concept that the microbial polyesters produced from waste effluents can be used to make cost-effective and energy-efficient wood-plastic composites. The cost of purified microbial polyesters is about 5-20 times that of HDPE depending on the cost of crude oil, due to high purification (40%), carbon substrate (40%) and sterilized fermentation (20%) costs for the PHB. Hence, the ability to produce competitive and functional composites with unpurified PHA-biomass mixtures from waste carbon sources in unsterile systemswithout cell debris removalis a significant step forward in producing competitive value-added structural composites from forest products residuals using a biorefinery approach. As demonstrated in the energy and waste analysis for the project, significant energy savings and waste reductions can also be realized using this approach. We recommend that the next step for development of useful products using this technology is to scale the technology from the 700-L pilot reactor to a small-scale production facility, with dedicated operation staff and engineering controls. In addition, we recommend that a market study be conducted as well as further product development for construction products that will utilize the unique properties of this bio-based material.

  12. User Guide for Disposal of Unwanted Items and Electronic Waste

    E-Print Network [OSTI]

    Mullins, Dyche

    is the Recycle department at 502-6808 o For more information on the UCSF Sustainability program visit: http://sustainability.ucsf.edu/stay_informed/recycling_resources consulting support Ensuring proper reuse, recycle, or disposal Maintaining regulatory and policy compliance metal and wood o Waste/trash management o Recycle, reuse or disposal of materials D&S does not process o

  13. Guide to Using Wood Ash as an Agricultural Soil Amendment

    E-Print Network [OSTI]

    New Hampshire, University of

    from larger commercial sources such as wood-burning biomass plants which produce heat or electricity in the soil. Wood ash is more soluble and reactive than ground limestone, and brings about a Benefits Recycles

  14. A study of the molecular mechanics of wood cell walls

    E-Print Network [OSTI]

    Adler, David, S.M. (David C.). Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Wood is the original structural material, developed by nature to support tall plants. Every advantageous feature of wood as used in artificial structures is rooted in the plant's evolved capability to withstand the conditions ...

  15. Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process

    E-Print Network [OSTI]

    Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process J. Z. Lu,1 Q. Wu,1 I. I parameters for the wood-fiber/high-density-polyethylene blends at 60 rpm were a temperature of 180°C

  16. Drawing a Graph in a Hypercube David R. Wood

    E-Print Network [OSTI]

    Wood, David R.

    Drawing a Graph in a Hypercube David R. Wood #3; Departament de Matem#18;atica Aplicada II Universitat Polit#18;ecnica de Catalunya Barcelona, Spain david.wood@upc.edu Submitted: Nov 16, 2004; Accepted

  17. Ring Involutions and Self-Dual Codes Jay A. Wood

    E-Print Network [OSTI]

    Wood, Jay

    Ring Involutions and Self-Dual Codes Jay A. Wood Department of Mathematics Western Michigan University jay.wood@wmich.edu AMS meeting, Lexington, Kentucky March 27, 2010 #12;Acknowledgments Much

  18. RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD

    E-Print Network [OSTI]

    Wood, Jay

    RELATIVE ONE-WEIGHT LINEAR CODES JAY A. WOOD In memory of Professor F. E. P. Hirzebruch, 17 October University. 1 #12;2 JAY A. WOOD G thus defines a linear functional (a "coordinate functional") on the k

  19. Generalizing Halfspaces 1 Eugene Fink 2 Derick Wood 3

    E-Print Network [OSTI]

    Fink, Eugene

    Generalizing Halfspaces 1 Eugene Fink 2 Derick Wood 3 Abstract Restricted­orientation convexity, as a generalization of standard convexity [9]. Rawlins, Wood, and Schuierer studied planar O­convex sets

  20. Drawing a Graph in a Hypercube David R. Wood

    E-Print Network [OSTI]

    Wood, David R.

    Drawing a Graph in a Hypercube David R. Wood Departament de Matem`atica Aplicada II Universitat Polit`ecnica de Catalunya Barcelona, Spain david.wood@upc.edu Submitted: Nov 16, 2004; Accepted: Aug 11

  1. Wood mobilization: la nuova frontiera delle politiche forestali

    E-Print Network [OSTI]

    Pettenella, Davide

    8-03-2013 1 Wood mobilization: la nuova frontiera delle politiche forestali europee CONAF settore forestale, un nuovo tema-guida: Wood Mobilization Task Force Foreste2. Green o grey? 3. Politica

  2. XML Structure Compression Mark Levene and Peter Wood

    E-Print Network [OSTI]

    Levene, Mark

    XML Structure Compression Mark Levene and Peter Wood Birkbeck College, University of London London WC1E 7HX, U.K. {m.levene,p.wood}@dcs.bbk.ac.uk Abstract XML is becoming the universal language

  3. Characters and finite Frobenius rings Jay A. Wood

    E-Print Network [OSTI]

    Wood, Jay

    Characters and finite Frobenius rings Jay A. Wood Department of Mathematics Western Michigan-modules; 3. R = R as right R-modules. Due independently to Hirano, 1997, and Wood, 1999. JW (WMU) Frobenius

  4. Clean-Burning Wood Stove Grant Program (Maryland)

    Broader source: Energy.gov [DOE]

    The Maryland Energy Administration (MEA) now offers the Clean Burning Wood Stove Grant program as part of its Residential Clean Energy Grant Program. The Clean Burning Wood Stove Grant program...

  5. FAO Forestry Department Wood Energy WISDOM East Africa

    E-Print Network [OSTI]

    percent of total African wood consumption. In the countries of East Sahelian Africa, Central Africa energy consumption (FAO 1999). Numerous studies have analyzed the wFAO ­ Forestry Department ­ Wood Energy WISDOM ­ East Africa Woodfuel Integrated Supply

  6. International Trade of Wood Pellets (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01T23:59:59.000Z

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  7. Volatile constituents in a wood pyrolysis oil

    E-Print Network [OSTI]

    Lin, Shih-Chien

    1978-01-01T23:59:59.000Z

    Science VOLATILE CONSTITUTENTS IN A WOOD PYROLYSIS OIL A Thesis SHIH-CHIEN LIN Appro d as to style and content by: (Chairman of Committee) Head of epa tmen (Member Member Nay 1978 442936 ABSTRACT Volatile Constituents in a Wood Pyrolysis Oil.../120 Supelcoport. Other trace constituents of volatile acid were also 'dentifi="' by trap- ping the substances from the C. C. column into i: n;- 0-sh ped capillary tube and subjecting to mass spectrometry. The corrosivity of pyrolysis oil and it, volati'e acids...

  8. Wood Fuel LP | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flats Geothermal AreaarticleWood Fuel LP Name: Wood

  9. Urban Wood-Based Bio-Energy Systems in Seattle

    SciTech Connect (OSTI)

    Stan Gent, Seattle Steam Company

    2010-10-25T23:59:59.000Z

    Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

  10. The Storage and Seasoning of Pecan Bud Wood.

    E-Print Network [OSTI]

    Brison, Fred R. (Fred Robert)

    1933-01-01T23:59:59.000Z

    be returned to cold storage and will remain ready for use at a later date. It has been found that bud wood cut late in the dormant period seasons in a shorter time than that cut early. Bud wood of the Delmas variety seasons more readiIy than that of Stuart... _._-_._.--__..__------~-..._..--_...._.--_.....-. Relation of Time of Cutting Bud Wood to Seasoning ._.__....._._-___._------------ ., Relative Response of Stuart and Delmas in Seasoning _---..__._.__....._.---....-....--.- 10 Number of Days for Seasoning Bud Wood During Different Months .... 12 Storage...

  11. Landfill Disposal of CCA-Treated Wood with Construction and

    E-Print Network [OSTI]

    Florida, University of

    Landfill Disposal of CCA-Treated Wood with Construction and Demolition (C&D) Debris: Arsenic phased out of many residential uses in the United States, the disposal of CCA-treated wood remains. Catastrophic events have also led to the concentrated disposal of CCA-treated wood, often in unlined landfills

  12. Deplump for Streaming Data Nicholas Bartlett Frank Wood

    E-Print Network [OSTI]

    Wood, Frank

    Deplump for Streaming Data Nicholas Bartlett Frank Wood Department of Statistics, Columbia of discrete sequences called the sequence memoizer [Wood et al., 2009]. Gasthaus et al. showed that although was reposed on a sequence memo- izer [Wood et al., 2009] whose space complexity was linear in the length

  13. Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1

    E-Print Network [OSTI]

    Boyer, Edmond

    Wood Products Identification by Internal Characteristics Readings C. FUENTEALBA1 , C. SIMON2 , D.fuentealba@cran.uhp-nancy.fr 5 LERMAB - Wood Research Laboratory, Epinal, France, e-mail: daniel- proving control of production tools and reacting to their defi- ciencies. For wood industries

  14. Wood in rivers: interactions with channel morphology and processes

    E-Print Network [OSTI]

    Montgomery, David R.

    Editorial Wood in rivers: interactions with channel morphology and processes No doubt about it, wood complicates fluvial geo- morphology. It messes up nice tidy streams, compli- cates quantitative through the study of channels lacking a substantial load of wood debris (Leopold et al., 1964

  15. Using Wood Quality Measures to Evaluate Second-Growth Redwood

    E-Print Network [OSTI]

    Standiford, Richard B.

    553 Using Wood Quality Measures to Evaluate Second-Growth Redwood Stephen L. Quarles1 and Yana stability, durability, microfibril angle, redwood, wood quality Introduction Redwood has long been a valued" or "resistant or very resistant" (Wood Handbook 1999). 1 University of California Cooperative Extension (Advisor

  16. Frederic Wood Compiled by Michael W. Pidgeon (1985)

    E-Print Network [OSTI]

    Handy, Todd C.

    Frederic Wood fonds Compiled by Michael W. Pidgeon (1985) University of British Columbia Archives Description Frederic Wood fonds. ­ 1915-1973. 33 cm of textual records. 22 photographs. Biographical Sketch Born in Victoria, B.C., Frederic Gordon Campbell Wood (1887-1976) enrolled in the first class

  17. Surface light fields for 3D photography Daniel N. Wood

    E-Print Network [OSTI]

    Washington at Seattle, University of

    Surface light fields for 3D photography Daniel N. Wood A dissertation submitted in partial This is to certify that I have examined this copy of a doctoral dissertation by Daniel N. Wood and have found for 3D photography by Daniel N. Wood Chair of Supervisory Committee: Associate Professor Brian L

  18. Wood Engineering Education Trends and Challenges Rakesh Gupta1

    E-Print Network [OSTI]

    Cox, Dan

    Wood Engineering Education ­ Trends and Challenges Rakesh Gupta1 and Vijaya Gopu2 1 Member ASCE, Associate Professor, Department of Wood Science and Engineering, Oregon State University, Corvallis of the factors impacting the wood engineering/design education in the U.S. has been presented. The actions

  19. Wood Science and Nanotechnology: Overview and Our Efforts

    E-Print Network [OSTI]

    Gray, Matthew

    Wood Science and Nanotechnology: Overview and Our Efforts Siqun Wang, Ph.D. Department of Forestry. Bot. 17, 543-588 (1886). Wang UT CRC #12;Wood Structure MICROFIBRIL STRUCTURE CRYSTALLINE REGIONS wood fibers under axial tensile strain Nature 1971; 229:252-3 Page DH, EI-Hosseiny F., Winkler K. Wang

  20. Wood 1 19th Annual AIAA/USU

    E-Print Network [OSTI]

    Wood, Lloyd

    Wood 1 19th Annual AIAA/USU Conference on Small Satellites SSC05-IV-03 Adopting Internet standards for orbital use Lloyd Wood Cisco Systems Global Defense, Space and Security Bedfont Lakes, London, UK; +44. #12;Wood 2 19th Annual AIAA/USU Conference on Small Satellites In June 2004, after lying dormant while

  1. Robert Wood Professor of Engineering and Applied Sciences at

    E-Print Network [OSTI]

    Lin, Xi

    Robert Wood Professor of Engineering and Applied Sciences at Harvard's School of Engineering and Applied Sciences Mechanical Engineering Robert Wood is the Charles River Professor of Engineering member of the Wyss Institute for Biologically Inspired Engineering. Prof. Wood completed his M.S. and Ph

  2. Wood ants use resin to protect themselves against pathogens

    E-Print Network [OSTI]

    Lehmann, Laurent

    Wood ants use resin to protect themselves against pathogens Michel Chapuisat1,*, Anne Oppliger2. Wood ants, Formica paralugubris, commonly bring back pieces of solidified coniferous resin of larvae exposed to the entomopathogenic fungus Metarhizium anisopliae. These results show that wood ants

  3. Codes of constant Lee or Euclidean weight Jay A. Wood

    E-Print Network [OSTI]

    Wood, Jay

    Codes of constant Lee or Euclidean weight Jay A. Wood Department of Mathematics, Computer Science & Statistics Purdue University Calumet Hammond, Indiana 46323 2094 USA wood@calumet.purdue.edu http: www.calumet.purdue.edu public math wood Abstract. Carlet 2 has determined the linear codes over Z=4 of constant Lee weight

  4. Wood September 28, 2002 DEPARTMENT OF MATERIALS SCIENCE

    E-Print Network [OSTI]

    Rollett, Anthony D.

    Wood September 28, 2002 1 DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING CARNEGIE MELLON: Microstructure-Sensitive Mechanical Properties #12;Wood September 28, 2002 2 Introduction Reading will also have an opportunity to perform similar experiments on various types of wood. These will illustrate

  5. Wood Density and Growth Conifers Introduced to Hawaii

    E-Print Network [OSTI]

    Standiford, Richard B.

    Wood Density and Growth of Some Conifers Introduced to Hawaii Roger G. Skolmen U . S . F O R E - Berkeley, California Forest Service - U. S. Department of Agriculture #12;Skolmen, Roger G. 1963. Wood Expt. Sta. 20 pp., illus. (U.S. Forest Serv. Res Paper PSW-12) The specific gravity of the wood of 14

  6. Center for Wood Utilization Progress Report for Fiscal Year 2010

    E-Print Network [OSTI]

    Tullos, Desiree

    , Asia, and Latin America. A business plan was developed to capture 1% of the $2.5 billion h manufacturing; and (c) lead to more efficient use of renewable wood-based materials for the benefit of Americans. Renewable wood is essential to human existence. Wood utilization research is critical to national needs

  7. Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste

    E-Print Network [OSTI]

    Tsien, Roger Y.

    Biohazardous Waste Disposal Guidelines Sharps Waste Solid Lab Waste Liquid Waste Animals Pathological Waste Description Biohazard symbol Address: UCSD 9500 Gilman Drive La Jolla, CA 92093 (858) 534) and identity of liquid waste Biohazard symbol Address: UCSD 9500 Gilman Drive La Jolla, CA 92093 (858) 534

  8. Integrated Datasets (IDs) Wood/Bretherton proposal

    E-Print Network [OSTI]

    Wood, Robert

    Integrated Datasets (IDs) Wood/Bretherton proposal ID Rationale Space/Time scale; Location; Platforms Parameters Combined Drizzle Dataset (CD ID) Collocated precipitation, aerosol and cloud micro, precip. rate, cloud Cross- Section Dataset (XS-ID) Data on E-W cross- section along 20°S from coast

  9. CORRUPTION AND ILLEGAL LOGGING IN THE WOOD

    E-Print Network [OSTI]

    Pettenella, Davide

    CORRUPTION AND ILLEGAL LOGGING IN THE WOOD PRODUCTS MARKET: the Italian experience in controlling Science 7 May 2004 Paper organization 1. State of the problem 2. Are Italian companies involved in deforestation and trade of illegal logging? 3. Which are the most affected countries? 4. Why do we need

  10. PASSION FOR WOOD THE DLH GROUP 2006

    E-Print Network [OSTI]

    countries on 5 continents · 19 timber merchant companies in Denmark, 10 of which have do-it-yourself stores Division consists of 19 timber merchant companies in Denmark, just over half of which have an adjacent doPASSION FOR WOOD THE DLH GROUP 2006 #12;54% 21% 25% ONE OF THE WORLD'S MAJOR TIMBER WHOLESALERS

  11. Wood anomalies in resonant photonic quasicrystals

    E-Print Network [OSTI]

    Poddubny, A N

    2010-01-01T23:59:59.000Z

    A theory of light diffraction from planar quasicrystalline lattice with resonant scatterers is presented. Rich structure, absent in the periodic case, is found in specular reflection spectra, and interpreted as a specific kind of Wood anomalies, characteristic for quasicrystals. The theory is applied to semiconductor quantum dots arranged in Penrose tiling.

  12. Milnor-Wood inequalities for products

    E-Print Network [OSTI]

    Bucher, Michelle

    2012-01-01T23:59:59.000Z

    We prove Milnor-Wood inequalities for local products of manifolds. As a consequence, we establish the generalized Chern Conjecture for products $M\\times \\Sigma^k$ for any product of a manifold $M$ with a product of $k$ copies of a surface $\\Sigma$ for $k$ sufficiently large.

  13. Harvested Wood Products -an Incentive for Deforestation?

    E-Print Network [OSTI]

    Fischlin, Andreas

    1 Harvested Wood Products - an Incentive for Deforestation? Andreas Fischlin1 Abstract Mitigation for deforestation is real. To curb the disadvantages of HWP, some debiting of non-sustainable forest management activities are implemented that provide true disincentives to deforestation, HWP may continue to create some

  14. Fast Curing of Composite Wood Products

    SciTech Connect (OSTI)

    Dr. Arthur J. Ragauskas

    2006-04-26T23:59:59.000Z

    The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: Identifying the rate limiting UF and PF curing reactions for current market resins; Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An alternative approach to accelerated PF curing can be accomplished with the addition amines or amides. The later functionality undergoes base catalyzed hydrolysis yielding the corresponding carboxyl ate and free amine which rapidly reacts with the phenolic methylol groups facilitating polymerization and curing of the PF resin (Pizzi, 1997).

  15. Conversion of a black liquor recovery boiler to wood firing: A case history

    SciTech Connect (OSTI)

    Eleniewski, M.A. [Detroit Stoker Company, Monroe, MI (United States)

    1994-12-31T23:59:59.000Z

    In 1983 a large integrated pulp and paper mill in southeastern United States retired an older chemical recovery boiler when it was replaced by a newer and larger unit as part of a mill expansion. At that time the mill was generating steam and power using wood waste, natural gas and black liquor, a common fuel mix for pulp mills. The retirement of the recovery boiler presented an opportunity for the mill and corporate engineering to evaluate various mixes of fuels for the mill.

  16. Hazardous Waste Program (Alabama)

    Broader source: Energy.gov [DOE]

    This rule states criteria for identifying the characteristics of hazardous waste and for listing hazardous waste, lists of hazardous wastes, standards for the management of hazardous waste and...

  17. Bioelectrochemical Integration of Waste Heat Recovery, Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MHRC System Concept ADVANCED MANUFACTURING OFFICE Bioelectrochemical Integration of Waste Heat Recovery, Waste-to-Energy Conversion, and Waste-to-Chemical Conversion with...

  18. Calorific and porosity development in carbonized wood

    SciTech Connect (OSTI)

    Baileys, R.T.; Blankenhorn, P.R.

    1982-07-01T23:59:59.000Z

    Wood of four species (red oak, southern yellow pine, black cherry, and hybrid poplar) were carbonized in a flowing nitrogen atmosphere at an average heating rate of 3 degrees Centigrade/minute to selected final temperatures up to 700 degrees Centigrade. The effects of final carbonization temperature on selected properties of the char were obtained using an adiabatic oxygen bomb calorimeter to investigate heat of combustion and a mercury porosimeter to investigate total porosity, real density, apparent density, and pore size distribution. Pore characteristics of carbonized wood developed before 300 degrees Centigrade in southern yellow pine and before 400 degrees Centigrade in red oak, black cherry, and hybrid poplar. Statistical analysis established linear relationships between heat of combustion versus final carbonization temperature in the carbonization temperature ranges investigated. The results of this study will aid in understanding optimum pryrolysis conditions for the development of calorific and porosity values. (Refs. 22).

  19. MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT

    E-Print Network [OSTI]

    of solid and liquid wastes generated at mushroom producing facilities. Environmental guidelines#12;MUSHROOM WASTE MANAGEMENT PROJECT LIQUID WASTE MANAGEMENT PHASE I: AUDIT OF CURRENT PRACTICE The Mushroom Waste Management Project (MWMP) was initiated by Environment Canada, the BC Ministry

  20. Generation, Use, Disposal, and Management Options for CCA-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Generation, Use, Disposal, and Management Options for CCA-Treated Wood May 1998 Helena Solo, INVENTORY OF CCA-TREATED WOOD IN FLORIDA II.1 Characteristics of the Florida Wood Treatment Industry in 1996 10 II.2 Generation and Disposal of Cca-treated Wood 14 II.3 Disposal Reservoirs for Cca-treated Wood

  1. Wood elastic characterization from a single sample by resonant ultrasound spectroscopy

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Wood elastic characterization from a single sample by resonant ultrasound spectroscopy R. Longoa materials such as wood using only one sample. To do so, two complementary methods are used. First, the wood: Resonant ultrasound spectroscopy, spherical and cubic samples, wood, elastic constants 1. Introduction Wood

  2. Society of Wood Science and Technology State-of-the-Art Review

    E-Print Network [OSTI]

    Society of Wood Science and Technology State-of-the-Art Review CHEMICAL COUPLING IN WOOD FIBER. In this paper, we review coupling agents, pretreatment, and mixing technology for wood fiber and polymer and adhesion Wood ond trhc,r S c r r ~ ~ Society of Wood Sclencc

  3. Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors

    DOE Patents [OSTI]

    Griffith, William Louis; Compere, Alicia Lucille; Leitten Jr., Carl Frederick

    2010-04-20T23:59:59.000Z

    A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

  4. NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy operated by the Alliance for Sustainable Energy, LLC Waste-to-Energy Technologies

    E-Print Network [OSTI]

    NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency in South Korea, fueled by industrial waste (mainly fabric, wood, plastic, packaging materials

  5. arsenate cca wood: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Renewable Energy Websites Summary: of primary energy in Estonia Wood fuels production Pellet firing projects in Estonia - SIDA Demo East firing projects in...

  6. FIEA Advancing Wood Technology Forest Industry Engineering Scholarship

    E-Print Network [OSTI]

    Hickman, Mark

    year. Forestry and wood products companies, key product suppliers, researchers and technology qualification. This FIEA Scholarship has also been set up to encourage and support an outstanding student

  7. Microsoft Word - CX-Murray-CusterWoodPoles_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    Covington SUBJECT: Environmental Clearance Memorandum Steve Scott Line Foreman III - TFNF-Snohomish Proposed Action: Wood pole replacement at selected locations along the...

  8. Stacy Wood's Personal Biography Dr. Wood's research focuses on how consumers respond and adapt to change or innovation. This applies both to

    E-Print Network [OSTI]

    Reif, John H.

    Stacy Wood's Personal Biography Dr. Wood's research focuses on how consumers respond and adapt, Journal of Marketing, Journal of Consumer Psychology, and Journal of Retailing. Dr. Wood joined the NC Undergraduate Teaching Award, the University of South Carolina's top undergraduate teaching honor. Dr. Wood

  9. Wood Pulp Digetster Wall Corrosion Investigation

    SciTech Connect (OSTI)

    Giles, GE

    2003-09-18T23:59:59.000Z

    The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall.

  10. Life in the woods : production and consumption of the urban forest

    E-Print Network [OSTI]

    Volicer, Nadine (Nadine M.)

    2012-01-01T23:59:59.000Z

    The use of wood is fraught with paradox. Wood as a building material is embraced for its naturalness, while the cutting of trees is indicted as a destruction of nature. Wood is lauded for its structural properties and ...

  11. The use of a permanent magnet for water content measurements of wood chips

    E-Print Network [OSTI]

    2001-01-01T23:59:59.000Z

    Diagram of a Wood Chip Moisture Content Measurement DeviceMeasurement of Moisture Content in Wood Chips Using NMR andWood chip water-content tests were done over a broad range of moisture contents

  12. Calorimetric analysis of fungal degraded wood

    SciTech Connect (OSTI)

    Blankenhorn, P.R.; Baldwin, R.C.; Merrill, W. Jr.; Ottone, S.P.

    1980-01-01T23:59:59.000Z

    Endothermic transition and gross heat of combustion of aspenwood subjected to degradation by Lenzites trabea and Polyporus versicolor were determined by using differential scanning calorimetry (DSC) and an adiabatic O bomb. Endothermic peak areas of undegraded and fungi-degraded wood differed from each other at all levels of weight loss. The regression analysis of the DSC data vs. weight loss revealed a significant relations, although not highly correlated, for P. versicolor-degraded specimens and a nonsignificant relation for L. trabea-degraded specimens; weight loss and gross heat of combustion values of degraded specimens were significantly correlated.

  13. Rachel Woods-Robinson | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems Engineering Research and DevelopmentDepartmentinBatteryRachel Woods-Robinson About

  14. Beverly Woods | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareers Apply for a JobBernardthe AlcatorBeverly Woods Beverly

  15. Wasted Wind

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    why turbulent airflows are causing power losses and turbine failures in America's wind farms-and what to do about it April 1, 2014 Wasted Wind This aerial photo of Denmark's Horns...

  16. Reducing the solid waste stream: reuse and recycling at Lawrence Livermore National Laboratory

    SciTech Connect (OSTI)

    Wilson, K. L.

    1997-08-01T23:59:59.000Z

    In Fiscal Year (FY) 1996 Lawrence Livermore National Laboratory (LLNL) increased its solid waste diversion by 365 percent over FY 1992 in five solid waste categories - paper, cardboard, wood, metals, and miscellaneous. (LLNL`s fiscal year is from October 1 to September 30.) LLNL reused/ recycled 6,387 tons of waste, including 340 tons of paper, 455 tons of scrap wood, 1,509 tons of metals, and 3,830 tons of asphalt and concrete (Table1). An additional 63 tons was diverted from landfills by donating excess food, selling toner cartridges for reconditioning, using rechargeable batteries, redirecting surplus equipment to other government agencies and schools, and comporting plant clippings. LLNL also successfully expanded its demonstration program to recycle and reuse construction and demolition debris as part of its facility-wide, comprehensive solid waste reduction programs.

  17. How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing

    E-Print Network [OSTI]

    Tam, Jerry

    2013-01-01T23:59:59.000Z

    of wood: effect of chip size, acid, moisture content andis the wood chip width, M is the moisture content (%), G is

  18. Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood Products Using Batch Leaching Tests treated with one of five different waterborne chemical preservatives, were leached using 18-h batch- treated wood at concentrations above the U.S. federal toxicity characteristic limit (5 mg/L). All

  19. A Chemical Stain for Identifying Arsenic-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    A Chemical Stain for Identifying Arsenic-Treated Wood (FINAL) Submitted June 23, 2006 Amy Omae.2 Motivation 4 I.3 Objectives 5 CHAPTER II, DEVELOPMENT OF A CHEMICAL STAIN FOR IDENTIFYING ARSENIC-TREATED Applications 22 II.5 Resulting Stain to Identify Arsenic-Treated Wood and Methods of Testing 25 CHAPTER III

  20. Trends and Market Effects of Wood Energy Policies

    E-Print Network [OSTI]

    Trends and Market Effects of Wood Energy Policies Bengt Hillring SLU SWEDEN http://www.unece.org/trade for energy is expected to increase · Trade of wood products is also expected to increase · COMPETITION is the main international energy source · Climate change ­ Energy production ­ CO2 · European Union different

  1. SECO - Dow Corning's Wood Fueled Industrial Cogeneration Project

    E-Print Network [OSTI]

    Betts, W. D.

    1982-01-01T23:59:59.000Z

    In 1979, Dow Corning Corporation decided to build a wood fueled steam and electric cogeneration (SECO) power plant at Midland, Michigan. This decision was prompted by the high cost of oil and natural gas, an abundant supply of wood in mid Michigan...

  2. Fibre Based Modeling of Wood Dynamics and Fracture

    E-Print Network [OSTI]

    Bridson, Robert

    Fibre Based Modeling of Wood Dynamics and Fracture by Sean Meiji Sutherland B.Sc., The University for the simulation of the dynamics and fracturing char- acteristics of wood, specifically its anisotropic behaviour bundles of fibres. Additionally, we describe the conditions under which fracture occurs in the material

  3. Through-thickness ultrasonic characterization of wood and

    E-Print Network [OSTI]

    in the form of bark, wood chips, sawdust, cotton gin trash, rice hulls, and sugar ba- gasse (Kleit et al. 1994. It was found that the equilibrium moisture content (EMC) was positively related to particulate sizeThrough-thickness ultrasonic characterization of wood and agricultural fiber composites Ronnie Y

  4. Wood, energy and households: Perspectives on rural Kenya

    SciTech Connect (OSTI)

    Barnes, C.; Ensminger, J.; O'Keefe, P.

    1984-01-01T23:59:59.000Z

    This book presents papers on the use of wood fuels in Kenya. Topics considered include domestic energy consumption, historical aspects, the Kenyan economy, ecology, supply and demand, forests, aspects of energy consumption in a pastoral ecosystem, estimation of present and future demand for wood fuels, and energy source development.

  5. Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely reliant on wood chip

    E-Print Network [OSTI]

    Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely's biomass energy sector could be undermined unless businesses move to resolve the supply chain issues-scale biomass plants will leave generators largely reliant on biomass from overseas such as wood chips, elephant

  6. Multipass comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2014-05-27T23:59:59.000Z

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel.

  7. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    SciTech Connect (OSTI)

    Sujit Banerjee; Terrance Conners

    2007-09-07T23:59:59.000Z

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal effects; Method 25A emissions from lumber drying can be modeled from a knowledge of the airflow through the kiln; A heat transfer model shows that VOCs released during hot-pressing mainly originate from the surface of the board; and Boiler ash can be used to adsorb formaldehyde from air streams.

  8. Waste processing air cleaning

    SciTech Connect (OSTI)

    Kriskovich, J.R.

    1998-07-27T23:59:59.000Z

    Waste processing and preparing waste to support waste processing relies heavily on ventilation. Ventilation is used at the Hanford Site on the waste storage tanks to provide confinement, cooling, and removal of flammable gases.

  9. Waste Disposal (Illinois)

    Broader source: Energy.gov [DOE]

    This article lays an outline of waste disposal regulations, permits and fees, hazardous waste management and underground storage tank requirements.

  10. Municipal solid waste combustion: Fuel testing and characterization

    SciTech Connect (OSTI)

    Bushnell, D.J.; Canova, J.H.; Dadkhah-Nikoo, A.

    1990-10-01T23:59:59.000Z

    The objective of this study is to screen and characterize potential biomass fuels from waste streams. This will be accomplished by determining the types of pollutants produced while burning selected municipal waste, i.e., commercial mixed waste paper residential (curbside) mixed waste paper, and refuse derived fuel. These materials will be fired alone and in combination with wood, equal parts by weight. The data from these experiments could be utilized to size pollution control equipment required to meet emission standards. This document provides detailed descriptions of the testing methods and evaluation procedures used in the combustion testing and characterization project. The fuel samples will be examined thoroughly from the raw form to the exhaust emissions produced during the combustion test of a densified sample.

  11. Wood smoke inhalation increases pulmonary microvascular permeability

    SciTech Connect (OSTI)

    Nieman, G.F.; Clark, W.R. Jr.; Goyette, D.; Hart, A.K.; Bredenberg, C.E.

    1989-04-01T23:59:59.000Z

    The effect of wood smoke inhalation (SI) on pulmonary vascular permeability was studied in open-chested, anesthetized dogs. Animals were divided into two groups. A prenodal lymphatic vessel was cannulated in group I (n = 7), and baseline (BL) lung lymph flow (QL) and lymph (CL) and plasma (CP) protein concentrations were measured. The animals' lungs were then ventilated with wood smoke for 5 minutes. Left atrial pressure (Pla) was increased above baseline (mean 16.7 +/- 2.2 mm Hg), and the ratio of CL to CP was used to assess endothelial permeability at high lymph flows. There was little change in either QL (BL: 27 +/- 9; SI: 27 +/- 5 microliters/min) or CL/CP (BL: 0.76 +/- 0.03; SI: 0.74 +/- 0.02) after SI at normal Pla. Elevation of Pla caused a significant increase in QL (136 +/- 15 microliters/min), but CL/CP (0.67 +/- 0.02) failed to decrease significantly at high lymph flows. In group II (n = 15) total protein concentration of airway fluid was compared with that of plasma after smoke inhalation, intravenous alloxan, and increased Pla. The ratio of protein concentration in airway fluid to plasma after SI (0.70 +/- 0.07) was greater than that obtained with increased Pla (0.64 +/- 0.07) but less than that after alloxan (0.85 +/- 0.04). These data indicate that SI in the dog results in a moderate increase in pulmonary vascular permeability that is less severe than that induced by alloxan.

  12. An economical and market analysis of Canadian wood pellets.

    SciTech Connect (OSTI)

    Peng, J. [University of British Columbia, Vancouver

    2010-08-01T23:59:59.000Z

    This study systematically examined the current and future wood pellet market, estimated the cost of Canadian torrefied pellets, and compared the torrefied pellets with the conventional pellets based on literature and industrial data. The results showed that the wood pellet industry has been gaining significant momentum due to the European bioenergy incentives and the rising oil and natural gas prices. With the new bioenergy incentives in USA, the future pellets market may shift to North America, and Canada can potentially become the largest pellet production centre, supported by the abundant wood residues and mountain pine beetle (MPB) infested trees.

  13. Author's personal copy Evaluation of methods for sorting CCA-treated wood

    E-Print Network [OSTI]

    Florida, University of

    Author's personal copy Evaluation of methods for sorting CCA-treated wood Gary Jacobi a , Helena contains treated wood including wood treated with chromated copper arsenate (CCA). Many recycling options of sorting methods for identifying treated wood. Sorting methods evaluated included visual sorting and visual

  14. Wood plastic composites based on microfibrillar blends of high density polyethylene/poly(ethylene terephthalate)

    E-Print Network [OSTI]

    Wood plastic composites based on microfibrillar blends of high density polyethylene January 2010 Keywords: Wood plastic composites Poly(ethylene terephthalate) Polyethylene Extrusion a b into wood plastic composites through a two-step reactive extrusion technology. Wood flour was added into pre

  15. short-wood and is also character-ized by large payloads and long

    E-Print Network [OSTI]

    Bolding, M. Chad

    short-wood and is also character- ized by large payloads and long distances. However, due to our- mately 90% of wood arrives at mills by truck, with 10% arriving through a combination of water and rail. Of the roundwood deliv- ery, approximately 93% is in long- wood form, with the small remain- der being short-wood

  16. Jmtland County Energy Agency Comfortable use of wood pellets in one-family houses in

    E-Print Network [OSTI]

    Jämtland County Energy Agency Sweden 1 Comfortable use of wood pellets in one-family houses-operation with the Swedish Energy Agency, carried through the project "Comfortable use of wood pellets in one-family houses of one-family houses to start using wood pellets and an increase of the use of wood pellets in one

  17. Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC

    E-Print Network [OSTI]

    Citation & Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC properties, maleation, thermal analysis, wood veneer, wood-PVC composites ABSTRACT The influence of maleation on thermal and dynamic-mechanical properties of wood-PVC composites was investigated in this study

  18. PROPERTIES OF HDPE/CLAY/WOOD NANOCOMPOSITES , C. M. Clemons 2

    E-Print Network [OSTI]

    from wood, kenaf, flax, hemp, cotton, Kraft pulp, coconut husk, areca fruit, pineapple leaf, oil palm

  19. Dynamics of wood recruitment in streams of the northeastern US Dana R. Warren a,

    E-Print Network [OSTI]

    Kraft, Clifford E.

    : Large woody debris LWD Riparian forest Wood recruitment Wood dynamics Stream restoration Debris dam restoration efforts often incorporate large wood. In most cases, however, stream restoration projectsDynamics of wood recruitment in streams of the northeastern US Dana R. Warren a, *, Clifford E

  20. Ethanol production using corn, switchgrass, and wood; Biodiesel production using soybean and

    E-Print Network [OSTI]

    David Pimentel; Tad W. Patzek

    2005-01-01T23:59:59.000Z

    production using wood biomass required 57 % more fossil energy than the ethanol fuel produced. Biodiesel

  1. Method for lowering the VOCS emitted during drying of wood products

    DOE Patents [OSTI]

    Banerjee, Sujit (1832 Jacksons Creek Point, Marietta, GA 30068); Boerner, James Robert (154 Junedale Rd., Cincinnati, OH 45218); Su, Wei (2262 Orleans Ave., Marietta, GA 30062)

    2000-01-01T23:59:59.000Z

    The present invention is directed to a method for removal of VOCs from wood products prior to drying the wood products. The method of the invention includes the steps of providing a chamber having an opening for receiving wood and loading the chamber with green wood. The wood is loaded to an extent sufficient to provide a limited headspace in the chamber. The chamber is then closed and the wood is heated in the chamber for a time and at a temperature sufficient to saturate the headspace with moisture and to substantially transfer VOCs from the wood product to the moisture in the headspace.

  2. WASTE TO WATTS Waste is a Resource!

    E-Print Network [OSTI]

    Columbia University

    to Climate protection in light of the· Waste Framework Directive. The "energy package", e.g. the RenewablesWASTE TO WATTS Waste is a Resource! energy forum Case Studies from Estonia, Switzerland, Germany Bossart,· ABB Waste-to-Energy Plants Edmund Fleck,· ESWET Marcel van Berlo,· Afval Energie Bedrijf From

  3. The Honorable John T. 'Gregorio 301 N. Wood Avenue

    Office of Legacy Management (LM)

    Wood Avenue Linden, 'New Jersey 07036 d. Dear Mayor Gregorio: ,' ,' .' , Secretary of Energy Hazel O'Leary has announced a new approach to openness, in the'llepartment' of...

  4. STUDIA FORESTALIA SUECICA Wood resource dynamics in the

    E-Print Network [OSTI]

    García, Oscar

    way or another. Wood Resource Dynamics (i.e. this volunze) describes the historical back- ground . . . . . . . . . . 3.2 Act one: Development determined by . . . . . . .free market forces 3.3 Act two: Government price

  5. Seismic rehabilitation of wood diaphragms in unreinforced masonary buildings

    E-Print Network [OSTI]

    Grubbs, Amber Jo

    2002-01-01T23:59:59.000Z

    The purpose of this study is to evaluate the seismic performance of existing and rehabilitated wood floor and roof diaphragms in typical pre-1950's, unreinforced masonry (URM) buildings found in the Central and Eastern portions of the United States...

  6. aspen wood chips: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 COMPARISON OF DIFFERENT APPROACHES FOR THE SIMULATION OF BOILERS USING OIL, GAS, PELLETS OR WOOD CHIPS CiteSeer Summary: A detailed model for the simulation of boilers using...

  7. Wood Gasification: Where It's At, Where It's Going

    E-Print Network [OSTI]

    Murphy, M. L.

    1981-01-01T23:59:59.000Z

    This paper discusses the principles and practice of various designs of biomass/wood gasifiers. In general, the basic principle of gasification is reviewed. A look at existing gasifier schemes, including packed bed updraft, downdraft, and fluidized...

  8. Wood Products Marketing And Value-Added Opportunities

    E-Print Network [OSTI]

    Wood Products Marketing And Value-Added Opportunities In Latin America: A Focus on Brazil Richard School of Renewable Natural Resources Louisiana State University Presented at: PANORAMA Curitiba, Brazil

  9. Long-term lime pretreatment of poplar wood

    E-Print Network [OSTI]

    Sierra Ramirez, Rocio

    2006-04-12T23:59:59.000Z

    Lignocellulosic biomass (e.g., poplar wood) provides a unique and sustainable resource for environmentally safe organic fuels and chemicals. The core of this study is the pretreatment step involved in bioconversion processes. Pretreatment...

  10. RFPs Due for Statewide Wood Energy Cooperative Agreement

    Broader source: Energy.gov [DOE]

    The U.S. Forest Service requests proposals for the 2014 Statewide Wood Energy Teams (SWET) Cooperative Agreement. The outcome anticipated under this funding mechanism will advance the United States...

  11. RFPs Due for Hazardous Fuel Wood to Energy Grant

    Broader source: Energy.gov [DOE]

    The U.S. Forest Service requests proposals for the 2014 Hazardous Fuel Wood to Energy (W2E) Grant. The outcome anticipated under this funding mechanism will advance the United States Department of...

  12. Hanford Site annual dangerous waste report: Volume 1, Part 1, Generator dangerous waste report, dangerous waste

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, weight, and waste designation.

  13. Moisture Distribution and Flow During Drying of Wood and Fiber

    SciTech Connect (OSTI)

    Zink-Sharp, Audrey; Hanna, Robert B.

    2001-12-28T23:59:59.000Z

    New understanding, theories, and techniques for moisture flow and distribution were developed in this research on wood and wood fiber. Improved understanding of the mechanisms of flake drying has been provided. Observations of flake drying and drying rate curves revealed that rate of moisture loss consisted of two falling rate periods and no constant rate drying period was observed. Convective heat transfer controls the first period, and bound water diffusion controls the second period. Influence of lower drying temperatures on bending properties of wood flakes was investigated. Drying temperature was found to have a significant influence on bending stiffness and strength. A worksheet for calculation of the energy required to dry a single strandboard flake was developed but has not been tested in an industrial setting yet. A more complete understanding of anisotropic transverse shrinkage of wood is proposed based on test results and statistical analysis. A simplified mod el of a wood cell's cross-section was drawn for calculating differential transverse shrinkage. The model utilizes cell wall thickness and microfibrillar packing density and orientation. In spite of some phenomena of cell wall structure not yet understood completely, the results might explain anisotropic transverse shrinkage to a major extent. Boundary layer theory was found useful for evaluating external moisture resistance during drying. Simulated moisture gradients were quire comparable to the actual gradients in dried wood. A mathematical procedure for determining diffusion and surface emission coefficients was also developed. Thermal conductivity models of wood derived from its anatomical structure were created and tested against experimental values. Model estimations provide insights into changes in heat transfer parameters during drying. Two new techniques for measuring moisture gradients created in wood during drying were developed. A new technique that utilizes optical properties of cobalt chloride was developed for nondestructive determination of surface moisture content. Fundamental new understanding of drying characteristics in wood and fiber has been provided that can be used by researchers to improve drying of wood and fiber. The three techniques for measuring moisture content and gradients provided in this study are efficient, practical, and economical - easy to apply by industry and researchers. An energy consumption worksheet is provided as a first step toward reducing energy consumed during drying of lumber and strandboard flakes. However, it will need additional verification and testing.

  14. Central Waste Complex (CWC) Waste Analysis Plan

    SciTech Connect (OSTI)

    ELLEFSON, M.D.

    1999-12-01T23:59:59.000Z

    The purpose of this waste analysis plan (WAP) is to document the waste acceptance process, sampling methodologies, analytical techniques, and overall processes that are undertaken for waste accepted for storage at the Central Waste Complex (CWC), which is located in the 200 West Area of the Hanford Facility, Richland, Washington. Because dangerous waste does not include the source, special nuclear, and by-product material components of mixed waste, radionuclides are not within the scope of this documentation. The information on radionuclides is provided only for general knowledge.

  15. 1 Copyright 2009 by ASME Proceedings of the 17th Annual North American Waste-to-Energy Conference

    E-Print Network [OSTI]

    models. On the other hand, full-scale grate models have not been used for examining solid waste mixing these phenomena, a full-scale physical model of the reverse acting grate was built and used for investigating residence time analysis using clay, wood and ceramic spheres in a small-scale model of the reverse acting

  16. Radioactive Waste Management (Minnesota)

    Broader source: Energy.gov [DOE]

    This section regulates the transportation and disposal of high-level radioactive waste in Minnesota, and establishes a Nuclear Waste Council to monitor the federal high-level radioactive waste...

  17. Waste Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500IIVasudhaSurface.Laboratory30,WP-073.99 4.22PrimaryWaste

  18. Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary

    SciTech Connect (OSTI)

    Levi, M. P.; O'Grady, M. J.

    1980-02-01T23:59:59.000Z

    The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

  19. Hazardous Wastes Management (Alabama)

    Broader source: Energy.gov [DOE]

    This legislation gives regulatory authority to the Department of Environmental Management to monitor commercial sites for hazardous wastes; fees on waste received at such sites; hearings and...

  20. Waste Treatment Plant Overview

    Office of Environmental Management (EM)

    contracted Bechtel National, Inc., to design and build the world's largest radioactive waste treatment plant. The Waste Treatment and Immobilization Plant (WTP), also known as the...

  1. Salt Waste Processing Initiatives

    Office of Environmental Management (EM)

    1 Patricia Suggs Salt Processing Team Lead Assistant Manager for Waste Disposition Project Office of Environmental Management Savannah River Site Salt Waste Processing Initiatives...

  2. Solid Waste (New Mexico)

    Broader source: Energy.gov [DOE]

    The New Mexico Environment Department's Solid Waste Bureau manages solid waste in the state. The Bureau implements and enforces the rules established by the Environmental Improvement Board.

  3. Nuclear Waste Reduction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Waste Reduction Pyroprocessing is a promising technology for recycling used nuclear fuel and improving the associated waste management options. The process...

  4. Radioactive Waste Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1984-02-06T23:59:59.000Z

    To establish policies and guidelines by which the Department of Energy (DOE) manages tis radioactive waste, waste byproducts, and radioactively contaminated surplus facilities.

  5. Transuranic Waste Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    The guide provides criteria for determining if a waste is to be managed in accordance with DOE M 435.1-1, Chapter III, Transuranic Waste Requirements.

  6. Radioactive and chemotoxic wastes: Only radioactive wastes?

    SciTech Connect (OSTI)

    Eletti, G.F.; Tocci, M. [ENEA DISP, Rome (Italy)

    1993-12-31T23:59:59.000Z

    Radioactive waste arising from Italian Nuclear Power Plants and Research Centers, classified as 1st and 2nd Category wastes, are managed only as radioactive wastes following the Technical Guide No. 26 issued by the Italian Regulatory Body: ENEA DISP on 1987. A very important Regulatory Regime revision for Italian Nuclear Activities started at the end of 1991. This paper considers the need to develop a new strategy dedicated to mixed waste in line with current international trends.

  7. Solid Waste and Infectious Waste Regulations (Ohio)

    Broader source: Energy.gov [DOE]

    This chapter of the law that establishes the Ohio Environmental Protection Agency establishes the rules and regulations regarding solid waste.

  8. WasteTraining Booklet Waste & Recycling Impacts

    E-Print Network [OSTI]

    Saldin, Dilano

    WasteTraining Booklet #12;Waste & Recycling Impacts Environment: The majority of our municipal jobs while recycling 10,000 tons of waste creates 36 jobs. Environment: Recycling conserves resources. It takes 95% less energy to make aluminum from recycled aluminum than from virgin materials, 60% less

  9. Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2013-08-13T23:59:59.000Z

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

  10. Hanford Site annual dangerous waste report: Volume 4, Waste Management Facility report, Radioactive mixed waste

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    This report contains information on radioactive mixed wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, handling method and containment vessel, waste number, waste designation and amount of waste.

  11. Hanford Site annual dangerous waste report: Volume 2, Generator dangerous waste report, radioactive mixed waste

    SciTech Connect (OSTI)

    NONE

    1994-12-31T23:59:59.000Z

    This report contains information on radioactive mixed wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, waste description, waste number, waste designation, weight, and waste designation.

  12. Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood This report is an excerpt from the report titled: New Lines of CCA-Treated Wood Research, In-Service and Disposal Issues Which was finalized

  13. Cavity availability and use in hardwood forests with emphasis on wood ducks

    E-Print Network [OSTI]

    Wolter, Derrick Wayne

    2002-01-01T23:59:59.000Z

    -oak (Pinus spp.-Quercus spp.) forest stands, respectively. Cavities with entrance dimensions suitable for entry by wood ducks (Aix sponsa) were inspected for suitability as wood duck nesting sites. Total cavity densities were similar between forest stands...

  14. FRED E. WOOD University of California, Davis, Ph.D., Inorganic and Bioinorganic Chemistry, 1984

    E-Print Network [OSTI]

    Amin, S. Massoud

    FRED E. WOOD EDUCATION University of California, Davis, Ph.D., Inorganic and Bioinorganic Chemistry scholarship and $1 million for endowed reentry student scholarships. #12;FRED E. WOOD Page 2 Obtained over

  15. Simulating the dynamics of flexible wood pulp fibres in suspension John M. Stockie

    E-Print Network [OSTI]

    Stockie, John

    , including wood pulp processing, polymer composites, and formation of fibre-reinforced materials elements to form a surface that re- sists bending and stretching. This is a natural construction for wood

  16. Milnor-Wood type inequalities for Higgs bundles

    E-Print Network [OSTI]

    Hartnick, Tobias

    2011-01-01T23:59:59.000Z

    We explain how the generalized Milnor-Wood inequality of Burger and Iozzi for reductive representations of a cocompact complex-hyperbolic lattice into a Hermitian Lie group translates under Simpson's non-abelian Hodge correspondence into an inequality for topological invariants of the corresponding Higgs bundles. In this way, we obtain an inequality that holds for all Hermitian Lie groups, generalizing the Milnor-Wood type inequalities for Higgs bundles that have been proved for the classical Hermitian Lie groups by Bradlow, Garcia-Prada, and Gothen and by Koziarz and Maubon.

  17. A collection of wood properties. Version 1.1

    SciTech Connect (OSTI)

    Toennisson, R.L.

    1992-09-01T23:59:59.000Z

    Reference books are the primary source of wood property data for use in research, school, or business. it has been our experience that obtaining the needed data from several references can be a cumbersome and time-consuming ordeal. These spreadsheets are a compilation of data from several well-known references. Version 1.1 includes the most recent update of commercial woods of the United States and the world. It is intended that they be used for quick summaries, comparisons, and calculations to increase the efficiency of the professional user in report preparation.

  18. Central Waste Complex (CWC) Waste Analysis Plan

    SciTech Connect (OSTI)

    ELLEFSON, M.D.

    2000-01-06T23:59:59.000Z

    The purpose of this waste analysis plan (WAP) is to document the waste acceptance process, sampling methodologies, analytical techniques, and overall processes that are undertaken for waste accepted for storage at the Central Waste Complex (CWC), which is located in the 200 West Area of the Hanford Facility, Richland, Washington. Because dangerous waste does not include the source special nuclear and by-product material components of mixed waste, radionuclides are not within the scope of this document. The information on radionuclides is provided only for general knowledge. This document has been revised to meet the interim status waste analysis plan requirements of Washington Administrative Code (WAC) 173 303-300(5). When the final status permit is issued, permit conditions will be incorporated and this document will be revised accordingly.

  19. Aluminum Waste Reaction Indicators in a Municipal Solid Waste Landfill

    E-Print Network [OSTI]

    Aluminum Waste Reaction Indicators in a Municipal Solid Waste Landfill Timothy D. Stark, F.ASCE1 landfills may contain aluminum from residential and commercial solid waste, industrial waste, and aluminum pro- duction wastes. Some aluminum-bearing waste materials, particularly aluminum production wastes

  20. Radioactive mixed waste disposal

    SciTech Connect (OSTI)

    Jasen, W.G.; Erpenbeck, E.G.

    1993-02-01T23:59:59.000Z

    Various types of waste have been generated during the 50-year history of the Hanford Site. Regulatory changes in the last 20 years have provided the emphasis for better management of these wastes. Interpretations of the Atomic Energy Act of 1954 (AEA), the Resource Conservation and Recovery Act of 1976 (RCRA), and the Hazardous and Solid Waste Amendments (HSWA) have led to the definition of radioactive mixed wastes (RMW). The radioactive and hazardous properties of these wastes have resulted in the initiation of special projects for the management of these wastes. Other solid wastes at the Hanford Site include low-level wastes, transuranic (TRU), and nonradioactive hazardous wastes. This paper describes a system for the treatment, storage, and disposal (TSD) of solid radioactive waste.

  1. Understanding radioactive waste

    SciTech Connect (OSTI)

    Murray, R.L.

    1981-12-01T23:59:59.000Z

    This document contains information on all aspects of radioactive wastes. Facts are presented about radioactive wastes simply, clearly and in an unbiased manner which makes the information readily accessible to the interested public. The contents are as follows: questions and concerns about wastes; atoms and chemistry; radioactivity; kinds of radiation; biological effects of radiation; radiation standards and protection; fission and fission products; the Manhattan Project; defense and development; uses of isotopes and radiation; classification of wastes; spent fuels from nuclear reactors; storage of spent fuel; reprocessing, recycling, and resources; uranium mill tailings; low-level wastes; transportation; methods of handling high-level nuclear wastes; project salt vault; multiple barrier approach; research on waste isolation; legal requiremnts; the national waste management program; societal aspects of radioactive wastes; perspectives; glossary; appendix A (scientific American articles); appendix B (reference material on wastes). (ATT)

  2. Management of Discarded Treated Wood Products: A Resource Guide for Generators

    E-Print Network [OSTI]

    Florida, University of

    Management of Discarded Treated Wood Products: A Resource Guide for Generators Prepared by have been conducting research on treated wood since 1996. During the course of the research, there have been numerous inquiries about the disposal and management options for treated wood products. There has

  3. Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya

    E-Print Network [OSTI]

    Florida, University of

    Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya , Thabet copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure

  4. Implications for the Future of Treated Wood in Four U.S. Demand Sectors

    E-Print Network [OSTI]

    Implications for the Future of Treated Wood in Four U.S. Demand Sectors Todd F. Shupe Associate extends the life span of lumber, but the Environmental Protection Agency says arsenic treated wood might arsenic-treated wood from Florida's public playgrounds failed to pass. "Wave of opponents kills Crow

  5. Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective

    E-Print Network [OSTI]

    Wu, Qinglin

    Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective is preservative-treated (SFPA 2004). In light of increasing market penetration from non-wood alternatives homeowner attitudes and awareness about using treated wood Strategic decisions can be made to better

  6. U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood

    E-Print Network [OSTI]

    U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood Todd F. Shupe treated wood might cut life short for our children. "EPA chops down potential killer", 24 Hour News 8, Florida, after his bill to ban arsenic-treated wood from Florida's public playgrounds failed to pass

  7. Modeling Sediment and Wood Storage and Dynamics in Small Mountainous Watersheds

    E-Print Network [OSTI]

    85 Modeling Sediment and Wood Storage and Dynamics in Small Mountainous Watersheds Stephen T controls on supply and transport of sediment and wood in a small (approximately two square kilometers) basin in the Oregon Coast Range, typical of streams at the interface between episodic sediment and wood

  8. Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding

    E-Print Network [OSTI]

    Dalang, Robert C.

    Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding.pichelin@b .ch Context: Wood can be welded using linear vibration welding tech- niques similar to the ones in plastic and metal industry[1] . Wood welding allows bonding strength similar to glued joints. However, due

  9. A SIMPLE PROOF OF THE FARY-WAGNER THEOREM DAVID R. WOOD

    E-Print Network [OSTI]

    Wood, David R.

    A SIMPLE PROOF OF THE F´ARY-WAGNER THEOREM DAVID R. WOOD The purpose of this note is to give at most two. 1 #12;2 DAVID R. WOOD denote the circle of radius centred at s. For each neighbour: david.wood@upc.edu #12;

  10. Are reefs and mud mounds really so different? Rachel Wood ,1

    E-Print Network [OSTI]

    Are reefs and mud mounds really so different? Rachel Wood ,1 Department of Earth Sciences-1223-333-450. E-mail address: rw43@esc.cam.ac.uk (R. Wood). 1 Current address: Schlu¨mberger Cambridge Research). While mud mounds are now accepted to be rigid, framework reefs (see Pratt, 1982; 1995; Webb, 1996; Wood

  11. Wood science education in a changing world: A case study of the

    E-Print Network [OSTI]

    Schweik, Charles M.

    Wood science education in a changing world: A case study of the UMASS-Amherst building materials & wood technology program, 1965-2005 David T. Damery Peggi Clouston Paul R. Fisette Abstract This paper discusses the historical and current day need for education in the area of building materials and wood

  12. WOOD DUCK BROOD MOVEMENTS AND HABITAT USE ON PRAIRIE RIVERS IN SOUTH DAKOTA

    E-Print Network [OSTI]

    WOOD DUCK BROOD MOVEMENTS AND HABITAT USE ON PRAIRIE RIVERS IN SOUTH DAKOTA DIANE A. GRANFORS.'·2. SD 57007. USA ~ .· Absfm£'f: Wood duck (Air SI)0/1.5O) populations have been increasing in the Central Flyway. but little is known about wood duck brood rearing in prairie e

  13. Wood piece quality evaluation using Choquet integral and fuzzy merging Jeremy Jover1,2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Wood piece quality evaluation using Choquet integral and fuzzy merging Jeremy Jover1,2 , Vincent,fuzzy operators, Choquet integral, divergent process Abstract: This paper presents a way to evaluate the wood (what is ideally expected). The wood industry is also concerned by these di- vergent process problems

  14. ORIGINAL PAPER L. Voc adlo K. S. Knight G. D. Price I. G. Wood

    E-Print Network [OSTI]

    Vocadlo, Lidunka

    ORIGINAL PAPER L. VocÏ adlo á K. S. Knight á G. D. Price á I. G. Wood Thermal expansion and crystal discussed by Wood et al. (1996), VocÏ adlo et al. (1999, 2000) and Mattheiss and Hamann (1993002690100202 L. VocÏ adlo (&) á G. D. Price á I. G. Wood Department of Geological Sciences, University College

  15. Large wood recruitment and redistribution in headwater streams in the southern Oregon Coast

    E-Print Network [OSTI]

    May, Christine L.

    Large wood recruitment and redistribution in headwater streams in the southern Oregon Coast Range, U.S.A.1 Christine L. May and Robert E. Gresswell Abstract: Large wood recruitment and redistribution and topographic setting strongly influenced processes that delivered wood to the channel network. In small

  16. Wood Transportation Systems-A Spin-Off of a Computerized Information

    E-Print Network [OSTI]

    Standiford, Richard B.

    Wood Transportation Systems-A Spin-Off of a Computerized Information and Mapping Technique William of the system to determine the allocation and association of wood sources and markets. INTRODUCTION In December strategies of wood origins and potential markets to be correlated very accurately and rapidly. Transportation

  17. Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC

    E-Print Network [OSTI]

    Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC Boiler House CHBE 573 Ann Pa May 15, 2009 #12;2 | P a g e INTRODUCTION Wood pellets are a type of biofuels and are often made. Like all biofuels, wood pellets are carbon- neutral and renewable and are very popular in Europe

  18. Illegal loggin and wood energy: UNECE Timber Committee discusses policy issues of the day SEARCH SITEMAP

    E-Print Network [OSTI]

    two of the most complex and topical policy issues facing the forest and timber sector: q wood energyIllegal loggin and wood energy: UNECE Timber Committee discusses policy issues of the day SEARCH SITEMAP PRESS RELEASE [Index] Illegal logging and wood energy: UNECE Timber Committee discusses policy

  19. Energy flow and ecosystem dynamics and wood energy in forest ecosystems

    E-Print Network [OSTI]

    Energy flow and ecosystem dynamics and wood energy in forest ecosystems S.M.C.U.P. Subasinghe respectively. The forests are the most important ecosystems in wood energy aspect. Other than the energy all Originally published in the Proceedings of Workshop of Training of Trainers in Wood Energy Aspects in Sri

  20. Society of Wood Science and Technology Convention 10-12 November 2008, Concepcin, Chile

    E-Print Network [OSTI]

    Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Global #12;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Subjects;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Main sources

  1. Name: Qinglin Wu Title: Roy O Martin Sr. Professor, Composites and Engineered Wood Products

    E-Print Network [OSTI]

    (ASTM), Philadelphia, PA · Forest Products Society, Madison, WI · Society of Wood and Science Technology Organizations · International Research Group in Wood Preservation, Stockholm, Sweden · American Chemical Society (ACS) · American Wood Preservation Association (AWPA) · American Society for Testing and Materials

  2. SECTION 50 Table of Contents 50 Lake Rufus Woods Management Plan .........................................................2

    E-Print Network [OSTI]

    and formation of the Subbasin Work Teams and the process used to develop and adopt the management plan can50-1 SECTION 50 ­ Table of Contents 50 Lake Rufus Woods Management Plan .........................................................................28 #12;50-2 50 Lake Rufus Woods Management Plan The Lake Rufus Woods Subbasin Management Plan

  3. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07.

  4. INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa

    E-Print Network [OSTI]

    Boyer, Edmond

    is a thermal pretreatment of lignocellulosic biomass before gazification. This mild form of pyrolysis, carried. The studied parameters are (i) the species of the biomass (spruce and beech) (ii) the torrefaction temperature: biomass to liquid (BtL), lignocellulosic sources, wood, torrefaction, analysis, characterization. 1

  5. U.S. Homeowner of Perceptions of Treated Wood

    E-Print Network [OSTI]

    U.S. Homeowner of Perceptions of Treated Wood Todd F. Shupe Extension Specialist Forest Products% Naturally durable species (cedar, redwood) 19% 56% 25% Treated lumber products 18% 67% 15% Untreated lumber Stating Agree or Strongly Agree Plastic 3.6 55% Steel 3.4 48% Treated Lumber 3.3 38% Concrete 2.8 24

  6. Wood Fuel Future: The Potential Web Text December 2010

    E-Print Network [OSTI]

    Wth for one family, with larger scale systems of 1 MWth heating 200 houses. Small scale wood fuel electricity provide electricity for up to 30,000 houses. Many electricity generating systems also produce heat and are called Combined Heat and Power systems. kWth = kilowatt thermal (i.e. heat) kWe = kilowatt electricity

  7. Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III*

    E-Print Network [OSTI]

    Hamza, Iqbal

    Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III* Department of Animal, and American Fisheries Society (AFS) Fish Culture Section, was held February 26 through March 2, 2007, in San Antonio, Texas. At this meeting, the AFS Fish Culture and Fish Physiol- ogy Sections co

  8. Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance

    E-Print Network [OSTI]

    Wood-Fiber/High-Density-Polyethylene Composites: Coupling Agent Performance John Z. Lu,1 Qinglin Wu structure. As a coupling agent, mal- eated polyethylene (MAPE) had a better performance in WPC than oxidized polyethylene (OPE) and pure polyeth- ylene (PPE) because of its stronger interfacial bonding. A combination

  9. Vertical feed stick wood fuel burning furnace system

    DOE Patents [OSTI]

    Hill, Richard C. (Orono, ME)

    1984-01-01T23:59:59.000Z

    A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  10. Production of chemical feedstock by the methanolysis of wood

    DOE Patents [OSTI]

    Steinberg, Meyer (Melville, NY); Fallon, Peter (East Moriches, NY)

    1984-07-31T23:59:59.000Z

    A process for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700.degree. C. to 1200.degree. C., at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  11. Vertical feed stick wood fuel burning furnace system

    DOE Patents [OSTI]

    Hill, Richard C. (Orono, ME)

    1982-01-01T23:59:59.000Z

    A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  12. An Overview of the Louisiana Primary Solid Wood Products Industry

    E-Print Network [OSTI]

    Laboratory can better serve Louisiana companies in this industry sector. Results include a discussion in Louisiana consists of 81 companies compared to approximately 750 companies in the secondary wood products sector. * Just over 36 percent of companies surveyed have 50 employees or more and 18.2 percent have 200

  13. The Wood-Based Biorefinery in a Petroleum Depleted World

    E-Print Network [OSTI]

    Chatterjee, Avik P.

    3 Year Old Willow #12;14 14 Woody Biomass Feedstocks Sustainably harvested low value wood from, Sustainable Bioproducts: Fuels, Chemicals, Materials Renewable Resources to "Green" Bio-Products Woody Biomass Feedstock #12;5 5 Spindletop at Beaumont, TX Circa late 1890's Birth of the Petroleum Industry in Texas

  14. HISTORICAL WOOD COLLECTION AT THE DENDROCHRONOLOGY LABORATORY, VYTAUTAS MAGNUS

    E-Print Network [OSTI]

    investigations. Subfossil oaks from river gravels, pines from peat bogs and wood from archeological excavations.) samples were collected in two peat bogs with pine trunks embedded in oligotrophic peat layers. One more than 300 samples of pine stumps and stems preserved in oligotrophic peat layers were coll

  15. APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS'

    E-Print Network [OSTI]

    APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS' Qinglin Wu Assistant. It was found that Nelson's model can be used to describe the experimental data from different composite composite materials (Suchsland 1972). These relationships, known as sorption isotherms, greatly affect

  16. Bryan H. Wood Assistant Deputy Commandant of the Marine Corps

    E-Print Network [OSTI]

    and stations throughout the world and for the operating forces across the U.S. Marine Corps. Mr. Wood advisor to the Commander, Combined Joint Task Force- Horn of Africa (CJTF-HOA) in Djibouti, Africa. Mr as the Environmental Law Section Head and Senior Associate Counsel (Environment/ Safety), Naval Sea Systems Command

  17. Potential for comparison drying of green wood chip fuel

    SciTech Connect (OSTI)

    Haygreen, J.G.

    1981-08-01T23:59:59.000Z

    Equipment currently designed for and in use by the forest products industry for the dewatering of wood bark and chips by mechanical pressure can only reduce the moisture content (MC) to 45 or 50% (wet basis). Thus, this equipment is suited to remove water added in processing but not free water normally present in green wood. Exploratory research described in this paper has shown on a laboratory scale that the proper application of high pressure to green wood chips can remove the water from cell lumens, thus reducing the MC to 35% or less. Further, this water removal may be accomplished in an energy efficient manner. The ratio of energy increase of the fuel (increase in recoverable heat) to the mechanical energy required for water removal was found to vary from 67:1 to 240:1. This ratio depends upon wood specific gravity (SG) green MC, and mode of compression. A theoretical relationship between volumetric compression, MC, SG, and water extracted was developed and tested on several species of softwoods and hardwoods. The cost savings for fuel and boiler investment in a hypothetical situation are presented to illustrate the economic potential of the process if production scale equipment can be developed. (17 references).

  18. AN EXAMINATION OF WOOD RECYCLING PROVISIONS IN NORTH AMERICAN GREEN

    E-Print Network [OSTI]

    -use and recycling. About 90 green building standards were examined. Current green building programs were determined (ASHRAE) come closest to universally describing the differences between these terms: Recovered Material Building Standards To understand how wood recycling is addressed in green building standards, about 90

  19. Influence of Nanoclay on Properties of HDPE/Wood Composites

    E-Print Network [OSTI]

    Agricultural Center, Baton Rouge, Louisiana 70803 2 Performance Engineered Composites, USDA Forest Service, absence of associated health hazards, easy fiber surface modification, wide availability, and relative, espe- cially wood plastic composites, which have success- fully proven their high qualities in various

  20. 2014 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date

    E-Print Network [OSTI]

    Williams, Gary A.

    2014 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of "0" (no knowledge_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification Archery

  1. 2012 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date

    E-Print Network [OSTI]

    Grether, Gregory

    2012 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of 0 (no knowledge) to 3_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification NRA Riflery

  2. 2013 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date

    E-Print Network [OSTI]

    Williams, Gary A.

    2013 BRUIN WOODS SUMMER STAFF APPLICATION Name Birth Date School Address Home Address Phone # ( ) E, Activities and Awards SKILLS, CERTIFICATES & QUALIFICATIONS CAMP SKILLS: On a scale of "0" (no knowledge_____________________________________________________________________________ CERTIFICATIONS (List expiration dates and certifying organizations) Lifeguard Boating Certification NRA Riflery

  3. Wood for energy at Bedgebury Forest Bedgebury visitor centre's

    E-Print Network [OSTI]

    . #12;Our advice Sweet chestnut coppice is a dense material which chips well at the correct moisture visitor centre as it has a ready supply of wood on its doorstep. Locally-grown coppiced chestnut is cut is locally sourced from 80 hectares of sweet chestnut coppice growing within Bedgebury Forest. The chestnut

  4. Nanocellulose A sustainable nanomaterial derived from wood pulp with

    E-Print Network [OSTI]

    Thompson, Michael

    Nanocellulose A sustainable nanomaterial derived from wood pulp with applications in composites, sensors, and biomedical devices. The Sustainable Nano-Biocomposites lab in the chemical engineering-renewable resources while offering better performance. #12;Research Program Research in the Sustainable Nano

  5. Page 2 of 4 TREE Cookies Etc. Got Woods -continued

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    of a forester is to help sell timber, though they can and should be used to write management plans, manage tree plantings, implement intermediate tending treatments to improve the woods, design soil stabilization the tree, the rays (the lateral transporting structures for water and nutrients) are blocked. Finally

  6. An Overview of the Louisiana Secondary Wood Products Industry

    E-Print Network [OSTI]

    . Marketing issues were also addressed such as the value of products shipped, market areas served or strategic planning with most companies relying on word-of-mouth to promote products directly to consumers issues identified by respondents regarding the secondary wood product industry improvement are production

  7. Production of chemical feedstock by the methanolysis of wood

    DOE Patents [OSTI]

    Steinberg, M.; Fallon, P.

    1983-06-01T23:59:59.000Z

    A process is discussed for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700/sup 0/C to 1200/sup 0/C, at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  8. DEVELOPMENT OF FUEL AND VALUE-ADDED CHEMICALS FROM PYROLYSIS OF WOOD/WASTE PLASTIC MIXTURE.

    E-Print Network [OSTI]

    Bhattacharya, Priyanka

    2008-01-01T23:59:59.000Z

    ??Highly oxygenated compounds in bio-oil produce negative properties that have hampered fuel development. Copyrolysis with plastics has increased hydrogen content in past research. Py-GC/MS analyses (more)

  9. Constraining uncertainties about the sources and magnitude of ambient air exposures to polycyclic aromatic hydrocarbons (PAHs): The state of Minnesota as a case study

    E-Print Network [OSTI]

    Lobscheid, Agnes B.; McKone, Thomas E.

    2004-01-01T23:59:59.000Z

    wood, wood waste, and black liquor are reported by thee other= wood waste, black liquor, used oil, petroleum coke,

  10. Georgia Hazardous Waste Management Act

    Broader source: Energy.gov [DOE]

    The Georgia Hazardous Waste Management Act (HWMA) describes a comprehensive, Statewide program to manage hazardous wastes through regulating hazardous waste generation, transportation, storage,...

  11. Waste Management Quality Assurance Plan

    E-Print Network [OSTI]

    Waste Management Group

    2006-01-01T23:59:59.000Z

    Revision 6 Waste Management Quality Assurance Plan Waste6 WM QA Plan Waste Management Quality Assurance Plan LBNL/4 Management Quality Assurance

  12. Hazardous Waste Act (New Mexico)

    Broader source: Energy.gov [DOE]

    "Hazardous waste" means any solid waste or combination of solid wastes that because of their quantity, concentration or physical, chemical or infectious characteristics may: cause or significantly...

  13. Waste-to-Energy: Waste Management and Energy Production Opportunities...

    Office of Environmental Management (EM)

    Waste-to-Energy: Waste Management and Energy Production Opportunities Waste-to-Energy: Waste Management and Energy Production Opportunities July 24, 2014 9:00AM to 3:30PM EDT U.S....

  14. Bioelectrochemical Integration of Waste Heat Recovery, Waste...

    Broader source: Energy.gov (indexed) [DOE]

    and Waste-to-Chemical Conversion with Industrial Gas and Chemical Manufacturing Processes Air Products and Chemicals, Inc. - Allentown, PA A microbial reverse electrodialysis...

  15. WASTE DISPOSAL WORKSHOPS: ANTHRAX CONTAMINATED WASTE

    E-Print Network [OSTI]

    Demonstration LLNL Lawrence Livermore National Laboratory MSW Municipal Solid Waste OSHA Occupational Safety and Health Administration PPE Personal Protective Equipment POTW Publicly Owned Treatment Works RCRA Resource

  16. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. The purpose of the Manual is to catalog those procedural requirements and existing practices that ensure that all DOE elements and contractors continue to manage DOE's radioactive waste in a manner that is protective of worker and public health and safety, and the environment. Does not cancel other directives.

  17. Report of Shelton wood-coal firing tests conducted March 16-April 2, 1980

    SciTech Connect (OSTI)

    Not Available

    1980-05-09T23:59:59.000Z

    Wood and coal combinations were tested at representative steam rates while boiler performance, gaseous and particulate emissions were measured. Wood and coal combinations were tested at representative steam rates while boiler performance, gaseous and particulate emissions were measured. Wood contributed up to 50% of the Btu requirements of the boilers during the tests. The Quinault-Pacific system will permit selected green mill residues to be used in place of coal at the rate of 2.5 tons of wood per ton of coal. Green wood and coal are compatible fuels. Heat provided by the coal and other combustion effects are enough to offset the effects of moisture in green wood and in some cases improve boiler performance. The combined firing of wood with coal at typical steam rates results in better flyash collection, lower emissions, improved opacity, better cinder recovery and lower steam costs.

  18. Dear colleagues, With the first newsletter "Tackle Climate Change: Use Wood" I intended to inform you on the

    E-Print Network [OSTI]

    from the air by trees and can thus be considered a carbon store. Increased use of wood products hence you on the excellent environmental credentials of wood and wood-based products, in particular the recognition of wood-based products as carbon stores with a positive contribution to climate change

  19. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILER PLANT

    SciTech Connect (OSTI)

    James T. Cobb Jr.

    2005-02-10T23:59:59.000Z

    Phase I of this project began by obtaining R&D variances for permits at the NIOSH boilerplant (NBP), Emery Tree Service (ETS) and the J. A. Rutter Company (JARC) for their portions of the project. Wood for the test burn was obtained from the JARC inventory (pallets), Thompson Properties and Seven D Corporation (construction wood), and the Arlington Heights Housing Project (demolition wood). The wood was ground at ETS and JARC, delivered to the Three Rivers Terminal and blended with coal. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NBP. Blends using hammermilled wood were operationally successful. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and evaluated. During the first year of Phase II the principal work focused upon searching for a replacement boilerplant and developing a commercial supply of demolition wood. The NBP withdrew from the project and a search began for another stoker boilerplant in Pennsylvania to replace it on the project. Three potential commercial demolition wood providers were contacted. Two were not be able to supply wood. At the end of the first year of Phase II, discussions were continuing with the third one, a commercial demolition wood provider from northern New Jersey. During the two-and-a-third years of the contract extension it was determined that the demolition wood from northern New Jersey was impractical for use in Pittsburgh, in another power plant in central New Jersey, and in a new wood gasifier being planned in Philadelphia. However, the project team did identify sufficient wood from other sources for the gasifier project. The Principal Investigator of this project assisted a feasibility study of wood gasification in Clarion County, Pennsylvania. As a result of the study, an independent power producer in the county has initiated a small wood gasification project at its site. Throughout much of this total project the Principal Investigator has counseled two small businesses in developing a waxed cardboard pellet business. A recent test burn of this biofuel appears successful and a purchase contract is anticipated soon. During the past two months a major tree-trimming firm has shown an active interest in entering the wood-chip fuel market in the Pittsburgh area and has contacted the NBP, among others, as potential customers. The NBP superintendent is currently in discussion with the facilities management of the Bruceton Research Center about resuming their interest in cofiring this renewable fuel to the stoker there.

  20. Solid Waste Management Written Program

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Solid Waste Management Program Written Program Cornell University 8/28/2012 #12;Solid Waste.................................................................... 4 4.2.1 Compost Solid Waste Treatment Facility.................................................................... 4 4.2.2 Pathological Solid Waste Treatment Facility

  1. Radioactive Waste: 1. Radioactive waste from your lab is

    E-Print Network [OSTI]

    Jia, Songtao

    Radioactive Waste: 1. Radioactive waste from your lab is collected by the RSO. 2. Dry radioactive waste must be segregated by isotope. 3. Liquid radioactive waste must be separated by isotope. 4. Liquid frequently and change them if contaminated. 5. Use radioactive waste container to collect the waste. 6. Check

  2. www.d-waste.com info@d-waste.com

    E-Print Network [OSTI]

    , the International Solid Waste Association, GIZ/SWEEP-Net, the Waste to Energy Research Council (WTERT) and the Solidwww.d-waste.com info@d-waste.com Acharnon 141 10446 ATHENS GREECE T: +30 2155302449 F: +30 2155302447 For Release November 13, 2013 Waste Atlas shows how the world handles its refuse D-Waste

  3. Hazardous Waste Management (Arkansas)

    Broader source: Energy.gov [DOE]

    The Hazardous Waste Program is carried out by the Arkansas Department of Environmental Quality which administers its' program under the Hazardous Waste management Act (Arkansas Code Annotated 8-7...

  4. Hazardous Waste Management (Delaware)

    Broader source: Energy.gov [DOE]

    The act authorizes the Delaware Department of Natural Resources and Environment Control (DNREC) to regulate hazardous waste and create a program to manage sources of hazardous waste. The act...

  5. Hazardous Waste Management (Oklahoma)

    Broader source: Energy.gov [DOE]

    This article states regulations for the disposal of hazardous waste. It also provides information about permit requirements for the transport, treatment and storage of such waste. It also mentions...

  6. Pet Waste Management

    E-Print Network [OSTI]

    Mechell, Justin; Lesikar, Bruce J.

    2008-08-28T23:59:59.000Z

    About 1 million pounds of dog waste is deposited daily in North Texas alone. That's why proper disposal of pet waste can make a big difference in the environment. 5 photos, 2 pages...

  7. Waste Management and WasteWaste Management and Waste--toto--EnergyEnergy Status in SingaporeStatus in Singapore

    E-Print Network [OSTI]

    Columbia University

    Waste Management and WasteWaste Management and Waste--toto--EnergyEnergy Status in Singapore #12;Singapore's Waste Management · In 2003, 6877 tonnes/day (2.51 M tonnes/year) of MSW collected plants · 8% (non-incinerable waste) and incineration ash goes to the offshore Semakau Landfill · To reach

  8. Waste disposal package

    DOE Patents [OSTI]

    Smith, M.J.

    1985-06-19T23:59:59.000Z

    This is a claim for a waste disposal package including an inner or primary canister for containing hazardous and/or radioactive wastes. The primary canister is encapsulated by an outer or secondary barrier formed of a porous ceramic material to control ingress of water to the canister and the release rate of wastes upon breach on the canister. 4 figs.

  9. Rethinking the Waste Hierarchy

    E-Print Network [OSTI]

    principles of EU waste policies. The environmental damage caused by waste depends on which type of manage, Environmental Assessment Institute For further information please contact: Environmental Assessment Institute.imv.dk #12;Environmental Assessment Institute Rethinking the Waste Hierarchy March 2005 Recommendations

  10. Performance of bolted wood connections using supplemental confining devices

    E-Print Network [OSTI]

    Stromatt, Rebecca Faye

    1996-01-01T23:59:59.000Z

    (1994) currently restricts the use of 2x dimensioned lumber for sill plates (nominal lumber thickness of The style and format of this thesis follow the Journal of Structural Engineering. 38. 1 mm [1. 5 in]) and requires the use of 3x dimensioned... lumber (nominal lumber thickness of 63. 5 mm [2. 5 in]). While a thicker wood member would increase the strength capacity of the connection according to analytical strength models, the ultimate failure mode under extreme loading conditions can still...

  11. Identifying Mixed Chemical and Radioactive Waste Mixed waste is: any waste material containing both radioactive materials

    E-Print Network [OSTI]

    Straight, Aaron

    Identifying Mixed Chemical and Radioactive Waste Mixed waste is: any waste material containing both as noted on the list, you do not have a mixed waste and it may be managed as a normal radioactive waste radioactive waste after initially dating the container, the hold for decay time is extended, but you cannot

  12. Municipal waste processing apparatus

    DOE Patents [OSTI]

    Mayberry, J.L.

    1988-04-13T23:59:59.000Z

    This invention relates to apparatus for processing municipal waste, and more particularly to vibrating mesh screen conveyor systems for removing grit, glass, and other noncombustible materials from dry municipal waste. Municipal waste must be properly processed and disposed of so that it does not create health risks to the community. Generally, municipal waste, which may be collected in garbage trucks, dumpsters, or the like, is deposited in processing areas such as landfills. Land and environmental controls imposed on landfill operators by governmental bodies have increased in recent years, however, making landfill disposal of solid waste materials more expensive. 6 figs.

  13. Radioactive Waste Management Basis

    SciTech Connect (OSTI)

    Perkins, B K

    2009-06-03T23:59:59.000Z

    The purpose of this Radioactive Waste Management Basis is to describe the systematic approach for planning, executing, and evaluating the management of radioactive waste at LLNL. The implementation of this document will ensure that waste management activities at LLNL are conducted in compliance with the requirements of DOE Order 435.1, Radioactive Waste Management, and the Implementation Guide for DOE Manual 435.1-1, Radioactive Waste Management Manual. Technical justification is provided where methods for meeting the requirements of DOE Order 435.1 deviate from the DOE Manual 435.1-1 and Implementation Guide.

  14. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09T23:59:59.000Z

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07. Admin Chg 2, dated 6-8-11, cancels DOE M 435.1-1 Chg 1.

  15. Mixed waste: Proceedings

    SciTech Connect (OSTI)

    Moghissi, A.A.; Blauvelt, R.K.; Benda, G.A.; Rothermich, N.E. [eds.] [Temple Univ., Philadelphia, PA (United States). Dept. of Environmental Safety and Health

    1993-12-31T23:59:59.000Z

    This volume contains the peer-reviewed and edited versions of papers submitted for presentation a the Second International Mixed Waste Symposium. Following the tradition of the First International Mixed Waste Symposium, these proceedings were prepared in advance of the meeting for distribution to participants. The symposium was organized by the Mixed Waste Committee of the American Society of Mechanical Engineers. The topics discussed at the symposium include: stabilization technologies, alternative treatment technologies, regulatory issues, vitrification technologies, characterization of wastes, thermal technologies, laboratory and analytical issues, waste storage and disposal, organic treatment technologies, waste minimization, packaging and transportation, treatment of mercury contaminated wastes and bioprocessing, and environmental restoration. Individual abstracts are catalogued separately for the data base.

  16. Colorado School of Mines Nov-12 Cylindrical or mortise lock aluminum, wood or steel door

    E-Print Network [OSTI]

    Colorado School of Mines Nov-12 Cylindrical or mortise lock aluminum, wood or steel door Hinges 4 cylindrical or mortise lock aluminum, wood or steel door Hinges 4.5"x4.5" Ives 5BB1HW El Hinge 4.5"x4 FS18S OR FS444 #12;Colorado School of Mines Nov-12 Aluminum, wood or steel door with panic bar Hinges

  17. Bioelectrochemical Integration of Waste Heat Recovery, Waste...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    electrolytic cell, designed to integrate waste heat recovery (i.e a microbial heat recovery cell or MHRC), can operate as a fuel cell and convert effluent streams into...

  18. New Waste Calcining Facility (NWCF) Waste Streams

    SciTech Connect (OSTI)

    K. E. Archibald

    1999-08-01T23:59:59.000Z

    This report addresses the issues of conducting debris treatment in the New Waste Calcine Facility (NWCF) decontamination area and the methods currently being used to decontaminate material at the NWCF.

  19. Transuranic (TRU) Waste | Department of Energy

    Office of Environmental Management (EM)

    Transuranic (TRU) Waste Transuranic (TRU) Waste Transuranic (TRU) Waste Defined by the WIPP Land Withdrawal Act as "waste containing more than 100 nanocuries of alpha-emitting...

  20. Solid Waste Management Plan. Revision 4

    SciTech Connect (OSTI)

    NONE

    1995-04-26T23:59:59.000Z

    The waste types discussed in this Solid Waste Management Plan are Municipal Solid Waste, Hazardous Waste, Low-Level Mixed Waste, Low-Level Radioactive Waste, and Transuranic Waste. The plan describes for each type of solid waste, the existing waste management facilities, the issues, and the assumptions used to develop the current management plan.

  1. Ferrocyanide tank waste stability

    SciTech Connect (OSTI)

    Fowler, K.D.

    1993-01-01T23:59:59.000Z

    Ferrocyanide wastes were generated at the Hanford Site during the mid to late 1950s as a result of efforts to create more tank space for the storage of high-level nuclear waste. The ferrocyanide process was developed to remove [sup 137]CS from existing waste and newly generated waste that resulted from the recovery of valuable uranium in Hanford Site waste tanks. During the course of research associated with the ferrocyanide process, it was recognized that ferrocyanide materials, when mixed with sodium nitrate and/or sodium nitrite, were capable of violent exothermic reaction. This chemical reactivity became an issue in the 1980s, when safety issues associated with the storage of ferrocyanide wastes in Hanford Site tanks became prominent. These safety issues heightened in the late 1980s and led to the current scrutiny of the safety issues associated with these wastes, as well as current research and waste management programs. Testing to provide information on the nature of possible tank reactions is ongoing. This document supplements the information presented in Summary of Single-Shell Tank Waste Stability, WHC-EP-0347, March 1991 (Borsheim and Kirch 1991), which evaluated several issues. This supplement only considers information particular to ferrocyanide wastes.

  2. Planning and setup for the implementation of coal and wood co-fired boilers.

    E-Print Network [OSTI]

    Gump, Christopher D.

    2007-01-01T23:59:59.000Z

    ??Coal and wood co-fired boiler technology has been significantly advancing in the past years, but many of their capabilities remain unknown to much of the (more)

  3. Techno-economic analysis of wood biomass boilers for the greenhouse industry

    SciTech Connect (OSTI)

    Chau, J. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver; Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Preto, F. [Natural Resources Canada; Melin, Staffan [University of British Columbia, Vancouver

    2009-01-01T23:59:59.000Z

    The objective of this study is to perform a techno-economic analysis on a typical wood pellet and wood residue boiler for generation of heat to an average-sized greenhouse in British Columbia. The variables analyzed included greenhouse size and structure, boiler efficiency, fuel types, and source of carbon dioxide (CO2) for crop fertilization. The net present value (NPV) show that installing a wood pellet or a wood residue boiler to provide 40% of the annual heat demand is more economical than using a natural gas boiler to provide all the heat at a discount rate of 10%. For an assumed lifespan of 25 years, a wood pellet boiler system could generate NPV of C$259,311 without electrostatic precipitator (ESP) and C$74,695 with ESP, respectively. While, installing a wood residue boiler with or without an ESP could provide NPV of C$919,922 or C$1,104,538, respectively. Using a wood biomass boiler could also eliminate over 3000 tonne CO2 equivalents of greenhouse gases annually. Wood biomass combustion generates more particulate matters than natural gas combustion. However, an advanced emission control system could significantly reduce particulate matters emission from wood biomass combustion which would bring the particulate emission to a relatively similar level as for natural gas.

  4. A review of "The Life of Anthony Wood In His Own Words" edited by Nicholas Kiessling

    E-Print Network [OSTI]

    Paleit, Edward

    2011-01-01T23:59:59.000Z

    authors exasperating, it is a vital form of exasperation. And whatever the exasperation, Genre and Women?s Life Writing in Early Modern England is much better reading than most blogs. Nicholas Kiessling, ed. #31;e Life of Anthony Wood In His Own Words...;#30;#21;#31; until retrieved by more recent scholarship, especially in the case of women. Anthony Wood, or as he later called himself, ? Wood, the historian of Oxford University and biographer of its alumni, was more fortunate. Wood wrote two manuscript...

  5. E-Print Network 3.0 - archaeological waterlogged wood Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    results for: archaeological waterlogged wood Page: << < 1 2 3 4 5 > >> 1 National Conservation Laboratory for Wet Organic Summary: digging stick footrests adhered to the linseed...

  6. WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions

    E-Print Network [OSTI]

    WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions Lead positive inspection reports Develop Forest Kindergarten with nurseries in both private and state sectors

  7. Issues in the use of wood as an energy source in the northeastern US

    SciTech Connect (OSTI)

    Munson, J.S. (ed.)

    1980-05-01T23:59:59.000Z

    This report analyzes some of the concerns surrounding the use of wood for energy in the Northeast. It reviews the information on resource availability and ownership patterns in the Northeast, then focuses on New England, to assess the affect of potential resource constraints on the supply of wood available for energy and the effects of wood energy use on land use patterns. Finally, the application of specific technologies in settings that may experience significant wood energy use in the future is considered, including an assessment of the regional employment and income benefits of a major woodfuel installation.

  8. Microsoft Word - CX-RossDistrictWoodPolesFY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    9, 2013 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacie Hensley Realty Specialist - TEP-TPP-4 Proposed Action: 2013 Ross District Wood Pole...

  9. Microsoft Word - CX-Chehalis-CentraliaNo2WoodPolesFY12_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    0, 2012 REPLY TO ATTN OF: KEPROlympia SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: Wood pole structure replacements on...

  10. Microsoft Word - CX-KalispellTLMDistrictFY11WoodPoleReplacement...

    Broader source: Energy.gov (indexed) [DOE]

    Bell-1 SUBJECT: Environmental Cleareance Memorandum Michael Stolfus Lineman Foreman III - TFKF-Kalispell Kurt Marsh Lineman Foreman I - TFKF-Kalispell Proposed Action: Wood pole...

  11. Microsoft Word - CX-BigEddy-RedmondWoodPoles_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    1 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacements at select locations...

  12. Microsoft Word - CX-FY11PascoDistrictWoodPoleReplacement_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    1, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Toby Cossairt Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor...

  13. Microsoft Word - CX-CowlitzTaptoChehalis-CovingtonWoodPoles_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    8, 2011 REPLY TO ATTN OF: KEPR-Covington SUBJECT: Environmental Clearance Memorandum Clay Grande Line Foreman III - TFCF-Covington Proposed Action: Wood pole replacement at...

  14. Microsoft Word - CX-FY11WenatcheeDistrictWoodPoleReplacement...

    Broader source: Energy.gov (indexed) [DOE]

    4, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor...

  15. Microsoft Word - CX-PilotButte-LaPine-WoodPoles-FY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    3, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Wood pole replacements on Bonneville Power...

  16. Microsoft Word - CX-RedmondWoodPoles_multiSub_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    5, 2011 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacement at selected...

  17. Microsoft Word - CX-AlveyDistrictWoodPoles-FY14_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    8, 2014 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacey Hensley Project Manager - TEP-TPP-4 Proposed Action: 2014 Alvey District Wood Pole...

  18. LIGNIN UNLOCKING PROCESS IN WOOD-FEEDING TERMITES FOR EFFECTIVE BIOMASS SUGAR RELEASE .

    E-Print Network [OSTI]

    [No author

    2012-01-01T23:59:59.000Z

    ??This study explored a unique lignin unlocking process in wood-feeding termite (WFT) Coptotermes formosanus (Shiraki) for subsequent effective polysaccharide utilization during the digestion of woody (more)

  19. Energy from Waste UK Joint Statement on Energy from Waste

    E-Print Network [OSTI]

    Energy from Waste UK Joint Statement on Energy from Waste Read more overleaf Introduction Energy from waste provides us with an opportunity for a waste solution and a local source of energy rolled,itcan onlyaddressaportionofthewastestream andisnotsufficientonitsown. Energy obtained from the combustion of residual waste (Energy from

  20. Hanford Tank Waste Information Enclosure 1 Hanford Tank Waste Information

    E-Print Network [OSTI]

    Hanford Tank Waste Information Enclosure 1 1 Hanford Tank Waste Information 1.0 Summary This information demonstrates the wastes in the twelve Hanford Site tanks meet the definition of transuranic (TRU. The wastes in these twelve (12) tanks are not high-level waste (HLW), and contain more than 100 nanocuries

  1. Stabilization of compactible waste

    SciTech Connect (OSTI)

    Franz, E.M.; Heiser, J.H. III; Colombo, P.

    1990-09-01T23:59:59.000Z

    This report summarizes the results of series of experiments performed to determine the feasibility of stabilizing compacted or compactible waste with polymers. The need for this work arose from problems encountered at disposal sites attributed to the instability of this waste in disposal. These studies are part of an experimental program conducted at Brookhaven National Laboratory (BNL) investigating methods for the improved solidification/stabilization of DOE low-level wastes. The approach taken in this study was to perform a series of survey type experiments using various polymerization systems to find the most economical and practical method for further in-depth studies. Compactible dry bulk waste was stabilized with two different monomer systems: styrene-trimethylolpropane trimethacrylate (TMPTMA) and polyester-styrene, in laboratory-scale experiments. Stabilization was accomplished by wetting or soaking compactible waste (before or after compaction) with monomers, which were subsequently polymerized. Three stabilization methods are described. One involves the in-situ treatment of compacted waste with monomers in which a vacuum technique is used to introduce the binder into the waste. The second method involves the alternate placement and compaction of waste and binder into a disposal container. In the third method, the waste is treated before compaction by wetting the waste with the binder using a spraying technique. A series of samples stabilized at various binder-to-waste ratios were evaluated through water immersion and compression testing. Full-scale studies were conducted by stabilizing two 55-gallon drums of real compacted waste. The results of this preliminary study indicate that the integrity of compacted waste forms can be readily improved to ensure their long-term durability in disposal environments. 9 refs., 10 figs., 2 tabs.

  2. Converting sugarcane waste into charcoal for Haiti

    E-Print Network [OSTI]

    Toussaint, Etienne Clement

    2007-01-01T23:59:59.000Z

    In Haiti, most families have traditionally relied on wood and wood-derived charcoal as their primary fuel source for indoor cooking. This resource has proven to be unsustainable, however, as over 90% of the Haitian countryside ...

  3. Underground waste barrier structure

    DOE Patents [OSTI]

    Saha, Anuj J. (Hamburg, NY); Grant, David C. (Gibsonia, PA)

    1988-01-01T23:59:59.000Z

    Disclosed is an underground waste barrier structure that consists of waste material, a first container formed of activated carbonaceous material enclosing the waste material, a second container formed of zeolite enclosing the first container, and clay covering the second container. The underground waste barrier structure is constructed by forming a recessed area within the earth, lining the recessed area with a layer of clay, lining the clay with a layer of zeolite, lining the zeolite with a layer of activated carbonaceous material, placing the waste material within the lined recessed area, forming a ceiling over the waste material of a layer of activated carbonaceous material, a layer of zeolite, and a layer of clay, the layers in the ceiling cojoining with the respective layers forming the walls of the structure, and finally, covering the ceiling with earth.

  4. Guidelines for mixed waste minimization

    SciTech Connect (OSTI)

    Owens, C.

    1992-02-01T23:59:59.000Z

    Currently, there is no commercial mixed waste disposal available in the United States. Storage and treatment for commercial mixed waste is limited. Host States and compacts region officials are encouraging their mixed waste generators to minimize their mixed wastes because of management limitations. This document provides a guide to mixed waste minimization.

  5. Operational Waste Volume Projection

    SciTech Connect (OSTI)

    STRODE, J.N.

    2000-08-28T23:59:59.000Z

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June. 2000.

  6. Operational waste volume projection

    SciTech Connect (OSTI)

    Koreski, G.M.

    1996-09-20T23:59:59.000Z

    Waste receipts to the double-shell tank system are analyzed and wastes through the year 2015 are projected based on generation trends of the past 12 months. A computer simulation of site operations is performed, which results in projections of tank fill schedules, tank transfers, evaporator operations, tank retrieval, and aging waste tank usage. This projection incorporates current budget planning and the clean-up schedule of the Tri-Party Agreement. Assumptions were current as of June 1996.

  7. Producer gas from citrus wood fuels irrigation power unit

    SciTech Connect (OSTI)

    Churchill, D.B.; Hedden, S.L.; Whitney, J.D.; Shaw, L.N.

    1985-01-01T23:59:59.000Z

    A 90-hp diesel engine operating a citrus irrigation system was converted to run on a dual-fuel mixture utilizing producer gas from citrus wood chips as the main fuel source. A chip feeder mechanism, gasifier, filter system and control unit were designed to meet typical irrigation power requirements. Blighted, unproductive and dead trees removed near the irrigation site were used for chipping. Data on chip moisture content, fuel analysis, drying rate and fuel/tree weight are presented but labour and equipment costs were not determined. 14 references.

  8. Compaction of wood chips - physical and pulping characteristics

    SciTech Connect (OSTI)

    Hassan, A.E.; Reeves, R.H.

    1980-01-01T23:59:59.000Z

    The temperatures of the uncompacted chips of Pinus taeda were, in general, higher than those of compacted chips when stored outdoors in containers for 236 days. The results of the study after storage indicated that the moisture content (MC) of compacted chips is the same as that of green chips, the uncompacted equivalent mass of chips exhibits a substantial loss in MC, and there is approximately 18% increase in MC of the uncompacted chips simulating a stockpile when compared with MC of green chips. The compaction process neither damaged wood fibers nor altered the chip response to conventional pulping.

  9. Transcriptome and Biochemical Analyses of Fungal Degradation of Wood

    SciTech Connect (OSTI)

    Tien, Ming

    2009-03-14T23:59:59.000Z

    Lignocellulosic accounts for a large percentage of material that can be utilized for biofuels. The most costly part of lignocellulosic material processing is the initial hydrolysis of the wood which is needed to circumvent the lignin barrier and the crystallinity of cellulose. Enzymes will play an increased role in this conversion in that they potentially provide an alternative to costly and caustic high temperature and acid treatment. The increasing use of enzymes in biotechnology is facilitated by both continued improvements in enzyme technology but also in the discovery of new and novel enzymes. The present proposal is aimed at identifying the enzymes which are known to depolymerize woody biomass. Fundamental understanding of how nature gains access to cellulose and hemicellulose will impact all applications. Because fungi are the only known microbes capable of circumventing the lignin barrier, knowledge of the enzyme they use is of great potential for biofuel processing. Nature has evolved different fungal mechanisms for enzymatic hydrolysis of wood. Most notable are the white-rot fungi (wrf) and the brown-rot fungi (brf). This proposed research aims at determining the complete transcriptome of three wrf and two brf to determine the enzymes involved in lignocellulose degradation. The transcriptome work will be supported by enzyme characterization (and zymograms) and finally analysis of the lignin component to determine the mode of lignin modification. In this proposed research, we hypothesize that: 1) Determination of the complete transcriptome of closely related white and brown rot fungi will lead to knowledge of the relevant enzymes involved in wood degradation. 2) Knowledge of the extracellular transcriptome and the mechanism of wood decay can only be obtained if the products of the decay are known. As such, characterization of the lignin oxidation products will correlate the enzymes involved (obtained from the transcriptome) to the lignin oxidation products. The Department of Energy has sequenced the P. chrysosporium genome and has approved the sequencing of the genome of the closely-related brown rot fungus P. placenta. This comparative genomics approach will yield important information on differences between these two fungi. Analysis of gene unique to each fungus (which have been lost or gained) can potentially lead to determining the enzymes which are responsible for each type of decay. This comparison, however, would not be complete without comparing the transcriptome and the proteome/enzymes. Comparative genomics may tell us which genes may be important, but it will not tell us when these genes are expressed, at what levels and will not necessarily tell us what these genes do.

  10. Meadow Woods, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429Lacey,(MonasterLowellisMcDonald is a boroughMcPherson County isMeadeWoods,

  11. Wood-Ridge, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamson County,Bay,°Trap, Virginia: EnergyWestWood-Ridge, New

  12. Title: Ames Blue Alert- Wood Cabinet Falls Apart

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe1A:decisional. 1 B O NAmes Blue Alert- Wood

  13. Hazardous Waste Management (Indiana)

    Broader source: Energy.gov [DOE]

    The state supports the implementation of source reduction, recycling, and other alternative solid waste management practices over incineration and land disposal. The Department of Environmental...

  14. Waste Heat Recovery

    Office of Environmental Management (EM)

    DRAFT - PRE-DECISIONAL - DRAFT 1 Waste Heat Recovery 1 Technology Assessment 2 Contents 3 1. Introduction to the TechnologySystem ......

  15. Norcal Waste Systems, Inc.

    SciTech Connect (OSTI)

    Not Available

    2002-12-01T23:59:59.000Z

    Fact sheet describes the LNG long-haul heavy-duty trucks at Norcal Waste Systems Inc.'s Sanitary Fill Company.

  16. Solid Waste Management (Connecticut)

    Broader source: Energy.gov [DOE]

    Solid waste facilities operating in Connecticut must abide by these regulations, which describe requirements and procedures for issuing construction and operating permits; environmental...

  17. Solid Waste Policies (Iowa)

    Broader source: Energy.gov [DOE]

    This statute establishes the support of the state for alternative waste management practices that reduce the reliance upon land disposal and incorporate resource recovery. Cities and counties are...

  18. Solid Waste Management (Indiana)

    Broader source: Energy.gov [DOE]

    The state supports the implementation of source reduction, recycling, and other alternative solid waste management practices over incineration and land disposal. The Indiana Department of...

  19. Avoidable waste management costs

    SciTech Connect (OSTI)

    Hsu, K.; Burns, M.; Priebe, S.; Robinson, P.

    1995-01-01T23:59:59.000Z

    This report describes the activity based costing method used to acquire variable (volume dependent or avoidable) waste management cost data for routine operations at Department of Energy (DOE) facilities. Waste volumes from environmental restoration, facility stabilization activities, and legacy waste were specifically excluded from this effort. A core team consisting of Idaho National Engineering Laboratory, Los Alamos National Laboratory, Rocky Flats Environmental Technology Site, and Oak Ridge Reservation developed and piloted the methodology, which can be used to determine avoidable waste management costs. The method developed to gather information was based on activity based costing, which is a common industrial engineering technique. Sites submitted separate flow diagrams that showed the progression of work from activity to activity for each waste type or treatability group. Each activity on a flow diagram was described in a narrative, which detailed the scope of the activity. Labor and material costs based on a unit quantity of waste being processed were then summed to generate a total cost for that flow diagram. Cross-complex values were calculated by determining a weighted average for each waste type or treatability group based on the volume generated. This study will provide DOE and contractors with a better understanding of waste management processes and their associated costs. Other potential benefits include providing cost data for sites to perform consistent cost/benefit analysis of waste minimization and pollution prevention (WMIN/PP) options identified during pollution prevention opportunity assessments and providing a means for prioritizing and allocating limited resources for WMIN/PP.

  20. Solid Waste Permits (Louisiana)

    Broader source: Energy.gov [DOE]

    The Louisiana Department of Environmental Quality administers the rules and regulations governing the storage, collection, processing, recovery, and reuse of solid waste protect the air,...

  1. Solid Waste Management (Michigan)

    Broader source: Energy.gov [DOE]

    This Act encourages the Department of Environmental Quality and Health Department representatives to develop and encourage methods for disposing solid waste that are environmentally sound, that...

  2. Vitrification of waste

    DOE Patents [OSTI]

    Wicks, George G. (Aiken, SC)

    1999-01-01T23:59:59.000Z

    A method for encapsulating and immobilizing waste for disposal. Waste, preferably, biologically, chemically and radioactively hazardous, and especially electronic wastes, such as circuit boards, are placed in a crucible and heated by microwaves to a temperature in the range of approximately 300.degree. C. to 800.degree. C. to incinerate organic materials, then heated further to a temperature in the range of approximately 1100.degree. C. to 1400.degree. C. at which temperature glass formers present in the waste will cause it to vitrify. Glass formers, such as borosilicate glass, quartz or fiberglass can be added at the start of the process to increase the silicate concentration sufficiently for vitrification.

  3. Vitrification of waste

    DOE Patents [OSTI]

    Wicks, G.G.

    1999-04-06T23:59:59.000Z

    A method is described for encapsulating and immobilizing waste for disposal. Waste, preferably, biologically, chemically and radioactively hazardous, and especially electronic wastes, such as circuit boards, are placed in a crucible and heated by microwaves to a temperature in the range of approximately 300 C to 800 C to incinerate organic materials, then heated further to a temperature in the range of approximately 1100 C to 1400 C at which temperature glass formers present in the waste will cause it to vitrify. Glass formers, such as borosilicate glass, quartz or fiberglass can be added at the start of the process to increase the silicate concentration sufficiently for vitrification.

  4. Waste minimization assessment procedure

    SciTech Connect (OSTI)

    Kellythorne, L.L. (Centerior Energy, Cleveland, OH (United States))

    1993-01-01T23:59:59.000Z

    Perry Nuclear Power Plant began developing a waste minimization plan early in 1991. In March of 1991 the plan was documented following a similar format to that described in the EPA Waste Minimization Opportunity Assessment Manual. Initial implementation involved obtaining management's commitment to support a waste minimization effort. The primary assessment goal was to identify all hazardous waste streams and to evaluate those streams for minimization opportunities. As implementation of the plan proceeded, non-hazardous waste streams routinely generated in large volumes were also evaluated for minimization opportunities. The next step included collection of process and facility data which would be useful in helping the facility accomplish its assessment goals. This paper describes the resources that were used and which were most valuable in identifying both the hazardous and non-hazardous waste streams that existed on site. For each material identified as a waste stream, additional information regarding the materials use, manufacturer, EPA hazardous waste number and DOT hazard class was also gathered. Once waste streams were evaluated for potential source reduction, recycling, re-use, re-sale, or burning for heat recovery, with disposal as the last viable alternative.

  5. Cost savings associated with landfilling wastes containing very low levels of uranium

    SciTech Connect (OSTI)

    Boggs, C.J. [Argonne National Lab., Germantown, MD (United States); Shaddoan, W.T. [Lockheed Martin Energy Systems, Paducah, KY (United States)

    1996-03-01T23:59:59.000Z

    The Paducah Gaseous Diffusion Plant (PGDP) has operated captive landfills (both residential and construction/demolition debris) in accordance with the Commonwealth of Kentucky regulations since the early 1980s. Typical waste streams allowed in these landfills include nonhazardous industrial and municipal solid waste (such as paper, plastic, cardboard, cafeteria waste, clothing, wood, asbestos, fly ash, metals, and construction debris). In July 1992, the U.S. Environmental Protection Agency issued new requirements for the disposal of sanitary wastes in a {open_quotes}contained landfill.{close_quotes} These requirements were promulgated in the 401 Kentucky Administrative Record Chapters 47 and 48 that became effective 30 June 1995. The requirements for a new contained landfill include a synthetic liner made of high-density polyethylene in addition to the traditional 1-meter (3-foot) clay liner and a leachate collection system. A new landfill at Paducah would accept waste streams similar to those that have been accepted in the past. The permit for the previously existing landfills did not include radioactivity limits; instead, these levels were administratively controlled. Typically, if radioactivity was detected above background levels, the waste was classified as low-level waste (LLW), which would be sent off-site for disposal.

  6. Secondary Waste Cast Stone Waste Form Qualification Testing Plan

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Serne, R. Jeffrey

    2012-09-26T23:59:59.000Z

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

  7. Waste Treatment and Immobilation Plant HLW Waste Vitrification...

    Office of Environmental Management (EM)

    6 Technology Readiness Assessment for the Waste Treatment and Immobilization Plant (WTP) HLW Waste Vitrification Facility L. Holton D. Alexander C. Babel H. Sutter J. Young August...

  8. Municipal Waste Planning, Recycling and Waste Reduction Act (Pennsylvania)

    Broader source: Energy.gov [DOE]

    This act provides for planning for the processing and disposal of municipal waste; requires counties to submit plans for municipal waste management systems within their boundaries; authorizes...

  9. Hazardous Waste Management (North Carolina)

    Broader source: Energy.gov [DOE]

    These rules identify and list hazardous waste and set standards for the generators and operators of such waste as well as owners or operators of waste facilities. They also stats standards for...

  10. Virginia Waste Management Act (Virginia)

    Broader source: Energy.gov [DOE]

    Solid waste and hazardous waste are regulated under a number of programs at the Department of Environmental Quality. These programs are designed to encourage the reuse and recycling of solid waste...

  11. Solid Waste Disposal Act (Texas)

    Broader source: Energy.gov [DOE]

    The Texas Commission on Environmental Quality is responsible for the regulation and management of municipal solid waste and hazardous waste. A fee is applied to all solid waste disposed in the...

  12. Solid Waste Act (New Mexico)

    Broader source: Energy.gov [DOE]

    The main purpose of the Solid Waste Act is to authorize and direct the establishment of a comprehensive solid waste management program. The act states details about specific waste management...

  13. Georgia Waste Control Law (Georgia)

    Broader source: Energy.gov [DOE]

    The Waste Control Law makes it unlawful to dump waste in any lakes, streams or surfaces waters of the State or on any private property without consent of the property owner. Waste is very broadly...

  14. Seismic design of a current woodframe structure and study of innovative products and damping systems in wood construction

    E-Print Network [OSTI]

    Mahjoub, Nina A. (Nina Azadeh)

    2007-01-01T23:59:59.000Z

    Wood structures have seen resurgence in popularity over the past several decades, especially in Western States of America, such as California. The industry keeps creating new structural wood products of exceptional strength, ...

  15. WOOD TRADE OUTLOOK THE TOP 4 AREAS TO WATCH IN 2008

    E-Print Network [OSTI]

    another way to go green with wood and support sustainable forest management in developing countries. Using of architects, much has been said about the emergence of green building standards in the marketplace to exotic woods to differentiate their building from others. With less than 2 percent of developing

  16. Research Article Fibre wall and lumen fractions drive wood density variation

    E-Print Network [OSTI]

    Wright, Ian

    with hydraulic strategies. Denser woods tend to operate at more negative water potentials (Ackerly 2004; Bucci et et al. 2011). Wood density has been studied in relation to hydraulic conductivity but the results.s.zieminska@gmail.com Published by Oxford University Press on behalf of the Annals of Botany Company. This is an Open Access

  17. New Lines of CCA-Treated Wood Research: In-Service and Disposal Issues

    E-Print Network [OSTI]

    Florida, University of

    New Lines of CCA-Treated Wood Research: In-Service and Disposal Issues Submitted March 19, 2001 Objectives 2 I.3 Background 4 CHAPTER II, METALS CONCENTRATIONS IN SOILS BELOW DECKS MADE OF CCA-TREATED WOOD Results from Soil Core Samples 24 II.7 Summary and Conclusions 28 CHAPTER III, INVENTORY OF CCA-TREATED

  18. A pilot study of children's exposure to CCA-treated wood from playground equipment

    E-Print Network [OSTI]

    Florida, University of

    A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat Arsenic from chromated copper arsenate (CCA)-treated wood, widely used in playgrounds and other outdoor associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11 children (13­71 months

  19. A pilot study of children's exposure to CCA-treated wood from playground equipment

    E-Print Network [OSTI]

    Florida, University of

    A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat online 17 February 2006 Abstract Arsenic from chromated copper arsenate (CCA)-treated wood, widely used possible health risks associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11

  20. Perception Drivers for Treated Wood by U.S. South Homebuilders and Remodelers

    E-Print Network [OSTI]

    Wu, Qinglin

    Perception Drivers for Treated Wood by U.S. South Homebuilders and Remodelers Sanna M. Kallioranta1 for the use of treated wood products in construction is considerable, especially in the U.S. South for termite protection and to mitigate moisture related decay. This research investigates the perception about treated

  1. Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    -line IR heating system installed on the peeling lathe. Keywords: green wood; heating; infrared; modeling solutions are sought for. Experiments with electric ohmic and microwave heating methods (TorgovnikovRational production of veneer by IR-heating of green wood during peeling: Modeling experiments Anna

  2. International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007

    E-Print Network [OSTI]

    International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007 Photo: NTC Marketing Specialist and Sebastian Hetsch, Consultant Food and Agricultural Organization & UN Economic Commission for Europe Geneva, Switzerland #12;International Conference on Wood-based Bioenergy LIGNA

  3. Opportunities for UPC Product and Service Suppliers: The Wood Products Industry

    E-Print Network [OSTI]

    Wu, Qinglin

    product and service suppliers. #12;4 UPC Suppliers To The Wood Products Industry Twenty-seven companies.3 percent of all corporate sales for these 27 respondent companies. An additional 15 companies indicated, from the largest timbers to small lengths of wood moulding are complying with customer requirements

  4. European Institute for Wood Preservation Congress 4-6 September 2008, Lausanne, Switzerland

    E-Print Network [OSTI]

    in European and CIS). · Oil prices soared, stimulating wood-based biofuels and policies to mobilize more wood Oil prices 0 20 40 60 80 100 120 140 2004 2005 2006 2007 2008 $/barrel · Rising fossil fuel costs products prices generally rose in 2007, then fell in 2008 as markets weakened · In North America prices

  5. THE NILPOTENCE HEIGHT OF Sq 2 n G. WALKER AND R. M. W. WOOD

    E-Print Network [OSTI]

    Wood, Reginald M W

    THE NILPOTENCE HEIGHT OF Sq 2 n G. WALKER AND R. M. W. WOOD Abstract. A 20 year old conjecture 55S10. 1 #12; 2 G. WALKER AND R. M. W. WOOD Sq u d Sq v = X SqhRi : jRj = u + v; jRj + X r i #23; 2u

  6. THE ROLE OF DEAD WOOD IN MAINTAINING ARTHROPOD DIVERSITY ON THE FOREST FLOOR.

    SciTech Connect (OSTI)

    Hanula, James L.; Horn, Scott; Wade, Dale D.

    2006-08-01T23:59:59.000Z

    AbstractDead wood is a major component of forests and contributes to overall diversity, primarily by supporting insects that feed directly on or in it. Further, a variety of organisms benefit by feeding on those insects. What is not well known is how or whether dead wood influences the composition of the arthropod community that is not solely dependent on it as a food resource, or whether woody debris influences prey available to generalist predators. One group likely to be affected by dead wood is ground-dwelling arthropods. We studied the effect of adding large dead wood to unburned and frequently burned pine stands to determine if dead wood was used more when the litter and understory plant community are removed. We also studied the effect of annual removal of dead wood from large (10-ha) plots over a 5-year period on ground-dwelling arthropods. In related studies, we examined the relationships among an endangered woodpecker that forages for prey on live trees, its prey, and dead wood in the forest. The results of these and other studies show that dead wood can influence the abundance and diversity of the ground-dwelling arthropod community and of prey available to generalist predators not foraging directly on dead trees.

  7. Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA

    E-Print Network [OSTI]

    Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA Submitted to Dr. Bi By Bernard Chan Pellets for UBC Boilers Replacing Natural Gas" By Bernard Chan, Brian Chan, and Christopher Young Abstract This report studies the feasibility of replacing natural gas with wood pellets for UBC boilers. A gasification

  8. WPMT (Fall 2009) Page 1 June 8, 2009 Wood Products Manufacturing Technology

    E-Print Network [OSTI]

    positions in wood products manufacturing, particularly for the hardwood cabinet and furniture industries to Lean Manufacturing (3) MET 14100 Materials I (4) Physics elective3 (3) STAT 30100 Elementary Sixth Semester (3) ECON 21000 Principles of Economics (3) FNR 31100 Wood Structure, Identification

  9. Presentation 2.4: Forest biorefining and implications for future wood energy scenarios Jack N. Saddler

    E-Print Network [OSTI]

    Presentation 2.4: Forest biorefining and implications for future wood energy scenarios Jack N Products Biotechnology at UBC Forest biorefining and implications for future wood energy scenarios W.mabee@ubc.ca International Seminar on Energy and the Forest Products Industry Rome, Italy: October 30 2006 Forest Products

  10. Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania

    E-Print Network [OSTI]

    Energy Market Developments Ed Pepke Forest Products Marketing Specialist UNECE/FAO Timber Section, Geneva. Overview of forest products market developments II. Market drivers III. Policy drivers IV. Wood energy for the Protection of Forests in Europe, November 2007 #12;Modern Wood Energy Systems and Markets 16-17 September

  11. SECTION 45 Table of Contents 45 Lake Rufus Woods Subbasin Overview.......................................................2

    E-Print Network [OSTI]

    Subbasin Description 45.2.1 General Location Lake Rufus Woods is a 51-mile long Columbia River mainstem of which are located on the Colville Indian Reservation. 45.2.2 Drainage Area The Lake Rufus Woods Subbasin the warmest month and January being the coldest. The annual precipitation for the area is 27 cm (10.5 inches

  12. WOOD UTILIZATION Eugene M. Wengert, Dennis M. Donnelly, Donald C. Markstrom, and Harold E. Worth

    E-Print Network [OSTI]

    WOOD UTILIZATION Eugene M. Wengert, Dennis M. Donnelly, Donald C. Markstrom, and Harold E. Worth to utilization of quaking aspen have not been well understood. Unfavorable economic factors, such as harvesting and wood processors in the West have found it difficult to identify and evaluate viable utilization

  13. Seismic Screening, Evaluation, Rehabilitation, and Design Provisions for Wood-Framed Structures

    E-Print Network [OSTI]

    Gupta, Rakesh

    Seismic Screening, Evaluation, Rehabilitation, and Design Provisions for Wood-Framed Structures Preston Baxter, M.ASCE1 ; Thomas H. Miller, M.ASCE2 ; and Rakesh Gupta, M.ASCE3 Abstract: Seismic Database subject headings: Seismic analysis; Seismic design; Wood structures; Shear walls; Diaphragms

  14. Mid-infrared absorption properties of green wood Anna Dupleix Domingos De Sousa Meneses

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ORIGINAL Mid-infrared absorption properties of green wood Anna Dupleix · Domingos De Sousa Meneses and the amount of energy absorbed by green wood under infrared (IR) radiation. This lack of knowledge is a potential barrier to the development of IR heating as an alternative to soaking as a means of warming logs

  15. Field Document No.50 REGIONAL WOOD ENERGY DEVELOPMENT PROGRAMME IN ASIA

    E-Print Network [OSTI]

    AND TOMORROW IN ASIA #12;This publication is printed by the FAO Regional Wood Energy Development Programme wood energy data, leading to best estimates of future consumption. It also tries to estimate development in other relevant sectors like agriculture and energy is also strongly recommended. The document

  16. Net carbon fluxes at stand and landscape scales from wood bioenergy harvests in the US Northeast

    E-Print Network [OSTI]

    Vermont, University of

    Net carbon fluxes at stand and landscape scales from wood bioenergy harvests in the US Northeast gas emissions implications of wood biomass (`bioenergy') harvests are highly uncer- tain yet of great bioenergy is only one of many products. We used field data to formulate bioenergy harvest scenarios, applied

  17. Forestry building a future in the South Southern Wood Council Forest Products Scholarship

    E-Print Network [OSTI]

    Hickman, Mark

    Forestry ­ building a future in the South Southern Wood Council Forest Products Scholarship attached): A written submission (no more than 1 page double sided) on why you are pursuing Forestry APPLICATIONS WILL BE ACCEPTED #12; Forestry ­ building a future in the South SOUTHERN WOOD COUNCIL FOREST

  18. ECOLOGICAL NOTES ON THE SIREX WOOD WASPS AND THEIR By H. S. HANSON.

    E-Print Network [OSTI]

    27 ECOLOGICAL NOTES ON THE SIREX WOOD WASPS AND THEIR PARASITES. By H. S. HANSON. Farnham House on the ecology of the Sirex wood-wasps and their parasites have been collected during a period of several years. The preliminary investigations were carried out by Dr. J. G. Myers, of Farnham House Laboratory, in collaboration

  19. INTRODUCTION Red wood ants play an important role in the ecology of

    E-Print Network [OSTI]

    Thomas, Len

    INTRODUCTION Red wood ants play an important role in the ecology of woodland ecosystems by virtue the ecological impor- tance of red wood ants (Gsswald, 1989) and the conser- vation concern for some species.borkin@clear.net.nz 2 Royal Society for the Protection of Birds, Etive House, Beechwood Park, Inverness, IV2 3BW, UK; e

  20. Ergonomic Solutions for the Secondary Wood Products Industry On October 17th

    E-Print Network [OSTI]

    Gazo, Rado

    Ergonomic Solutions for the Secondary Wood Products Industry On October 17th and 18th , 2001, you are invited to a conference entitled: Ergonomic Solutions for the Secondary Wood Products Industry. This seminar will be held at Executive Inn, in Louisville, Kentucky. Hear the latest developments in ergonomics

  1. ORIGINAL ARTICLE Targets for maintenance of dead wood for biodiversity conservation

    E-Print Network [OSTI]

    ORIGINAL ARTICLE Targets for maintenance of dead wood for biodiversity conservation based and restore dead wood in managed forest landscapes should be defined. Several studies suggest extinction. In managed forests, conservation efforts should focus on the landscape scale and on certain types of dead

  2. Cancer Mortality and Wood Dust Exposure Among Participants in the American Cancer

    E-Print Network [OSTI]

    Salzman, Daniel

    Cancer Mortality and Wood Dust Exposure Among Participants in the American Cancer Society Cancer and Paolo Boffetta, MD, MPH3 In 1994, the International Agency for Research on Cancer (IARC) classified wood dust as a human carcinogen, based on very strong evidence of a carcinogenic risk of sino-nasal cancer

  3. Solar energy and multi-storey residential buildings Larry Hughes and Tylor Wood

    E-Print Network [OSTI]

    Hughes, Larry

    ERG/200702 Solar energy and multi-storey residential buildings Larry Hughes and Tylor Wood Energy.hughes@dal.ca 26 March 2007 #12;Hughes and Wood: Solar energy and multi-storey residential buildings 1 Summary This report considers the limitations on solar energy in new, multi-storey residential buildings. In a time

  4. Environmental Management Waste Management Facility Waste Lot Profile 155.5 for K-1015-A Laundry Pit, East Tennessee Technology Park Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    Bechtel Jacobs, Raymer J.E.

    2008-06-12T23:59:59.000Z

    In 1989, the Oak Ridge Reservation (ORR), which includes the East Tennessee Technology Park (ETTP), was placed on the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) National Priorities List. The Federal Facility Agreement (FFA) (DOE 1992), effective January 1, 1992, now governs environmental restoration activities conducted under CERCLA at the ORR. Following signing of the FFA, U.S. Department of Energy (DOE), U.S. Environmental Protection Agency (EPA), and the state of Tennessee signed the Oak Ridge Accelerated Cleanup Plan Agreement on June 18, 2003. The purpose of this agreement is to define a streamlined decision-making process to facilitate the accelerated implementation of cleanup, to resolve ORR milestone issues, and to establish future actions necessary to complete the accelerated cleanup plan by the end of fiscal year 2008. While the FFA continues to serve as the overall regulatory framework for remediation, the Accelerated Cleanup Plan Agreement supplements existing requirements to streamline the decision-making process. The disposal of the K-1015 Laundry Pit waste will be executed in accordance with the 'Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone, 2, East Tennessee Technology Park, Oak Ridge, Tennessee' (DOB/ORAH-2161&D2) and the 'Waste Handling Plan for the Consolidated Soil and Waste Sites with Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee' (DOE/OR/01-2328&D1). This waste lot consists of a total of approximately 50 cubic yards of waste that will be disposed at the Environmental Management Waste Management Facility (EMWMF) as non-containerized waste. This material will be sent to the EMWMF in dump trucks. This profile is for the K-1015-A Laundry Pit and includes debris (e.g., concrete, metal rebar, pipe), incidental soil, plastic and wood, and secondary waste (such as plastic sheeting, hay bales and other erosion control materials, wooden pallets, contaminated equipment, decontamination materials, etc.).

  5. Prediction of the heat release rate of wood

    SciTech Connect (OSTI)

    Parker, W.J.

    1988-01-01T23:59:59.000Z

    A model for the heat release rate of wood during flaming combustion was developed during this research. It includes the effects of char shrinkage, multiple chemical components, adsorbed moisture, internal convective cooling and the variation of the thermophysical and thermochemical properties with temperature and the mass retention fraction of the char. It does not include char oxidation or diffusion of moisture and volatile pyrolysis products toward the rear surface. It calculates the time to ignition, mass burning rate, heat release rate, heat of combustion, heat of gasification and depth of char. An important part of this research was the determination of the thermochemical and thermophysical properties required by the model. An apparatus was developed for determining the kinetic parameters and the heat of combustion of the volatiles under conditions similar to those in the interior of a flaming slab of wood. Data were obtained on each of the four major chemical components present in Douglas fir. Thermal diffusivity measurements on Douglas fir and its char yielded an average value of 2.1 {times} 10{sup {minus}7} s{sup 2}/s which was nearly independent of temperature and mass retention fraction of the char for temperature sup to 500{degree}C and for mass-retention fractions above 0.30.

  6. Hygrothermal Performance of West Coast Wood Deck Roofing System

    SciTech Connect (OSTI)

    Pallin, Simon B [ORNL; Kehrer, Manfred [ORNL; Desjarlais, Andre Omer [ORNL

    2014-02-01T23:59:59.000Z

    Simulations of roofing assemblies are necessary in order to understand and adequately predict actual the hygrothermal performance. At the request of GAF, simulations have been setup to verify the difference in performance between white and black roofing membrane colors in relation to critical moisture accumulation for traditional low slope wood deck roofing systems typically deployed in various western U.S. Climate Zones. The performance of these roof assemblies has been simulated in the hygrothermal calculation tool of WUFI, from which the result was evaluated based on a defined criterion for moisture safety. The criterion was defined as the maximum accepted water content for wood materials and the highest acceptable moisture accumulation rate in relation to the risk of rot. Based on the criterion, the roof assemblies were certified as being either safe, risky or assumed to fail. The roof assemblies were simulated in different western climates, with varying insulation thicknesses, two different types of wooden decking, applied with varying interior moisture load and with either a high or low solar absorptivity at the roof surface (black or white surface color). The results show that the performance of the studied roof assemblies differs with regard to all of the varying parameters, especially the climate and the indoor moisture load.

  7. Volatilization of selected organic compounds from a creosote-waste land-treatment facility. Master's thesis

    SciTech Connect (OSTI)

    Scott, E.J.

    1989-01-01T23:59:59.000Z

    The purpose of this research was to evaluate the emissions of volatile and semi-volatile compounds which are constituents of a complex creosote waste from laboratory simulations of a land treatment system to assess the potential human exposure to hazardous compounds from this source. In addition, the Thibodeaux-Hwang Air Emission Release Rate (AERR) model was evaluated for its use in predicting emission rates of hazardous constituents of creosote wood preservative waste from land treatment facilities. A group of hazardous volatile and semi-volatile constituents present in the creosote waste was selected for evaluation in this study and included a variety of polynuclear aromatic hydrocarbons (PNA's), phenol, and chlorinated and substituted phenols.

  8. Implementation plan for the Waste Experimental Reduction Facility Restart Operational Readiness Review

    SciTech Connect (OSTI)

    Not Available

    1993-03-01T23:59:59.000Z

    The primary technical objective for the WERF Restart Project is to assess, upgrade where necessary, and implement management, documentation, safety, and operation control systems that enable the resumption and continued operation of waste treatment and storage operations in a manner that is compliant with all environment, safety, and quality requirements of the US Department of Energy and Federal and State regulatory agencies. Specific processes that will be resumed at WERF include compaction of low-level compatible waste; size reduction of LLW, metallic and wood waste; incineration of combustible LLW and MLLW; and solidification of low-level and mixed low-level incinerator bottom ash, baghouse fly ash, and compatible sludges and debris. WERF will also provide for the operation of the WWSB which includes storage of MLLW in accordance with Resource Conservation and Recovery Act requirements.

  9. Provenance study and environments of deposition of the Pennslyvanian-Permian Wood River Formation, south-central Idaho, and the paleotectonic character of the Wood River basin

    E-Print Network [OSTI]

    Dean, Christopher William

    1982-01-01T23:59:59.000Z

    and provenance of the conglomerates in the Big Wood River and Fish Creek Reservoir regions of south-central Idaho is needed. Distinguishing between marine and non-marine strata and determining source terranes will aid in reconstructing Wood River basin... paleogeography and paleo- tectonics. Three source areas have been postulated in recent years: 1, The Antler highland to the west, containing volcanics and low grade metamorphic rocks (Bissell, 1960; Churkin, 1962; Roberts and Thomasson, 1964). 2. The stable...

  10. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste Yard Sorting Table surveying to sort clean waste from radioactive waste Radioactive Emissions Emission lives. Radioactive Waste generated through wet chemistry Waste Minimization 30 Mixed waste / Liquid

  11. Solid Waste Paul Woodson, East Central University

    E-Print Network [OSTI]

    of groundwater contamination, air pollution, and odor. Solid wastes may be displeasing to the public either, industrial and medical wastes, food wastes, mineral waste, and nonhazardous wastes. In addition/reservoirs, special wastes, such as medical wastes, low level radioactive wastes, construction/demolition debris

  12. Animal Waste Technology Fund (Maryland)

    Broader source: Energy.gov [DOE]

    A bill passed in 2012 transferred responsibility for animal waste management technology projects to the Maryland Department of Agriculture. The Department will maintain the Animal Waste Technology...

  13. Nebraska Hazardous Waste Regulations (Nebraska)

    Broader source: Energy.gov [DOE]

    These regulations, promulgated by the Department of Environmental Quality, contain provisions pertaining to hazardous waste management, waste standards, permitting requirements, and land disposal...

  14. RADIOACTIVE WASTE DISPOSAL IN GRANITE

    E-Print Network [OSTI]

    Witherspoon, P.A.

    2010-01-01T23:59:59.000Z

    RADIOACTIVE WASTE DISPOSAL IN GRANITE Paul A. WitherspoonRADIOACTIVE WASTE DISPOSAL IN GRANITE Paul A. Wither spoona repository site in granite are to evaluate the suitability

  15. Solid Waste Management Act (Oklahoma)

    Broader source: Energy.gov [DOE]

    This Act establishes rules for the permitting, posting of security, construction, operation, closure, maintenance and remediation of solid waste disposal sites; disposal of solid waste in ways that...

  16. Solid Waste Management (South Dakota)

    Broader source: Energy.gov [DOE]

    This statute contains provisions for solid waste management systems, groundwater monitoring, liability for pollution, permitting, inspections, and provisions for waste reduction and recycling...

  17. Hazardous Waste Management (New Mexico)

    Broader source: Energy.gov [DOE]

    The New Mexico Environment Department's Hazardous Waste Bureau is responsible for the management of hazardous waste in the state. The Bureau enforces the rules established by the Environmental...

  18. Solid Waste Rules (New Hampshire)

    Broader source: Energy.gov [DOE]

    The solid waste statute applies to construction and demolition debris, appliances, recyclables, and the facilities that collect, process, and dispose of solid waste. DES oversees the management of...

  19. Solid Waste Management (North Carolina)

    Broader source: Energy.gov [DOE]

    The Solid Waste Program regulates safe management of solid waste through guidance, technical assistance, regulations, permitting, environmental monitoring, compliance evaluation and enforcement....

  20. Radioactive waste disposal package

    DOE Patents [OSTI]

    Lampe, Robert F. (Bethel Park, PA)

    1986-01-01T23:59:59.000Z

    A radioactive waste disposal package comprising a canister for containing vitrified radioactive waste material and a sealed outer shell encapsulating the canister. A solid block of filler material is supported in said shell and convertible into a liquid state for flow into the space between the canister and outer shell and subsequently hardened to form a solid, impervious layer occupying such space.

  1. Hazardous Waste Management Training

    E-Print Network [OSTI]

    Dai, Pengcheng

    Hazardous Waste Management Training Persons (including faculty, staff and students) working with hazardous materials should receive annual training that addresses storage, use, and disposal of hazardous before handling hazardous waste. Departments are re- quired to keep records of training for as long

  2. Nuclear waste solutions

    DOE Patents [OSTI]

    Walker, Darrel D. (1684 Partridge Dr., Aiken, SC 29801); Ebra, Martha A. (129 Hasty Rd., Aiken, SC 29801)

    1987-01-01T23:59:59.000Z

    High efficiency removal of technetium values from a nuclear waste stream is achieved by addition to the waste stream of a precipitant contributing tetraphenylphosphonium cation, such that a substantial portion of the technetium values are precipitated as an insoluble pertechnetate salt.

  3. Waste classification sampling plan

    SciTech Connect (OSTI)

    Landsman, S.D.

    1998-05-27T23:59:59.000Z

    The purpose of this sampling is to explain the method used to collect and analyze data necessary to verify and/or determine the radionuclide content of the B-Cell decontamination and decommissioning waste stream so that the correct waste classification for the waste stream can be made, and to collect samples for studies of decontamination methods that could be used to remove fixed contamination present on the waste. The scope of this plan is to establish the technical basis for collecting samples and compiling quantitative data on the radioactive constituents present in waste generated during deactivation activities in B-Cell. Sampling and radioisotopic analysis will be performed on the fixed layers of contamination present on structural material and internal surfaces of process piping and tanks. In addition, dose rate measurements on existing waste material will be performed to determine the fraction of dose rate attributable to both removable and fixed contamination. Samples will also be collected to support studies of decontamination methods that are effective in removing the fixed contamination present on the waste. Sampling performed under this plan will meet criteria established in BNF-2596, Data Quality Objectives for the B-Cell Waste Stream Classification Sampling, J. M. Barnett, May 1998.

  4. Municipal Solid Waste Combustion : Fuel Testing and Characterization : Task 1 Report, May 30, 1990-October 1, 1990.

    SciTech Connect (OSTI)

    Bushnell, Dwight J.; Canova, Joseph H.; Dadkhah-Nikoo, Abbas.

    1990-10-01T23:59:59.000Z

    The objective of this study is to screen and characterize potential biomass fuels from waste streams. This will be accomplished by determining the types of pollutants produced while burning selected municipal waste, i.e., commercial mixed waste paper residential (curbside) mixed waste paper, and refuse derived fuel. These materials will be fired alone and in combination with wood, equal parts by weight. The data from these experiments could be utilized to size pollution control equipment required to meet emission standards. This document provides detailed descriptions of the testing methods and evaluation procedures used in the combustion testing and characterization project. The fuel samples will be examined thoroughly from the raw form to the exhaust emissions produced during the combustion test of a densified sample.

  5. Pentachlorophenol (PCP)-treated wood poles and crossarms: Toxicity Characteristic Leaching Procedure (TCLP) results

    SciTech Connect (OSTI)

    Horn, M.E. (Environmental Management Services, Waupaca, WI (USA)); Holcombe, L.; Owens, J.B. (Radian Corp., Austin, TX (USA))

    1990-12-01T23:59:59.000Z

    The objective of this study was to develop a quantitative database on leachable concentrations of pentachlorophenol (PCP) from a population of treated utility wood poles and crossarms as obtained by the Toxicity Characteristic Leaching Procedure (TCLP). An ancillary objective was to carefully document a subsampling method in preparing wood samples for tests by the TCLP. Data obtained in this study indicate that PCP-treated utility wood poles and crossarms are non-hazardous. Measured concentrations of PCP and other organic compounds subject to TCLP analysis were an order of magnitude or more below TC limits in 47 samples of wood derived from three different sections of 13 utility wood poles and from 9 crossarms. Wedge shaped subsamples, removed from full cross sectional slices of poles and crossarms, were prepared according to EPA procedures, subjected to the TCLP, and resultant leachates analyzed for the presence of PCP. 4 refs., 3 figs., 10 tab.

  6. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILERPLANT

    SciTech Connect (OSTI)

    James T. Cobb, Jr.; Gene E. Geiger; William W. Elder III; Thomas Stickle; Jun Wang; Hongming Li; William P. Barry

    2002-06-13T23:59:59.000Z

    During the third quarter, the experimental portion of the project was carried out. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NIOSH Boiler Plant (NBP). Blends using hammer-milled wood were operationally successful and can form the basis of Phase II. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and the mathematical modeling of mercury speciation reactions continued, yielding many interesting results. Material and energy balances for the test periods at the NBP, as well as at the Bellefield Boiler Plant, were prepared. Steps were taken to remove severe constraints from the Pennsylvania Switchgrass Energy and Conservation Project and to organize the supplying of landfill gas to the Bruceton federal complex. Two presentations were made to meetings of the Electric Power Research Institute and the National Energy Technology Laboratory.

  7. Metal Bioavailability and Speciation in a Wetland Tailings Repository Amended with Biosolids Compost, Wood Ash, and Sulfate

    E-Print Network [OSTI]

    Brown, Sally

    Compost, Wood Ash, and Sulfate Pam S. DeVolder, Sally L. Brown,* Dean Hesterberg, and Kumi Pandya ABSTRACT tundra swans surface amendments: (i) biosolids compost plus wood ash, (ii) and other animals found in the area have tested positive compost wood ash a low SO2 4 addition as K2SO4, and (iii) for Pb poisoning

  8. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into the Red Listed Material: Pressure Treated Wood

    E-Print Network [OSTI]

    into the Red Listed Material: Pressure Treated Wood (Preservative Infused) and Possible Alternatives Abby Yuen of a project/report". #12;APSC 261 An Investigation into the Red Listed Material: Pressure Treated Wood. Pressure treated wood, a commonly used building material in British Columbia, is a red-listed material

  9. Woodfuel Usage Update 1 I Wood fuel use in Scotland 2012 I Hudson Consulting I November 2012

    E-Print Network [OSTI]

    . Existing plant demand is forecast to grow in 2012, and together with projects currently in the building phase, total wood fuel demand is forecast to rise to 678k odt in 2012 and to 946k odt in 2013 80k odt of wood in 2011. There is a major increase in forecast demand for wood to be used as pellet

  10. Waste Isolation Pilot Plant Nitrate Salt Bearing Waste Container

    E-Print Network [OSTI]

    Napp, Nils

    of Energy (DOE) and Nuclear Waste Partnership LLC (NWP), collectively referred to as the Permittees Isolation Plan (Plan) for identified nitrate salt bearing waste disposed in the Waste Isolation Pilot Plant detailed proposal for the expedited closure of underground Hazardous Waste Disposal Unit (HWDU) Panel 6, so

  11. TRU Waste Sampling Program: Volume I. Waste characterization

    SciTech Connect (OSTI)

    Clements, T.L. Jr.; Kudera, D.E.

    1985-09-01T23:59:59.000Z

    Volume I of the TRU Waste Sampling Program report presents the waste characterization information obtained from sampling and characterizing various aged transuranic waste retrieved from storage at the Idaho National Engineering Laboratory and the Los Alamos National Laboratory. The data contained in this report include the results of gas sampling and gas generation, radiographic examinations, waste visual examination results, and waste compliance with the Waste Isolation Pilot Plant-Waste Acceptance Criteria (WIPP-WAC). A separate report, Volume II, contains data from the gas generation studies.

  12. Radioactive waste material disposal

    DOE Patents [OSTI]

    Forsberg, C.W.; Beahm, E.C.; Parker, G.W.

    1995-10-24T23:59:59.000Z

    The invention is a process for direct conversion of solid radioactive waste, particularly spent nuclear fuel and its cladding, if any, into a solidified waste glass. A sacrificial metal oxide, dissolved in a glass bath, is used to oxidize elemental metal and any carbon values present in the waste as they are fed to the bath. Two different modes of operation are possible, depending on the sacrificial metal oxide employed. In the first mode, a regenerable sacrificial oxide, e.g., PbO, is employed, while the second mode features use of disposable oxides such as ferric oxide. 3 figs.

  13. Radioactive waste material disposal

    DOE Patents [OSTI]

    Forsberg, Charles W. (155 Newport Dr., Oak Ridge, TN 37830); Beahm, Edward C. (106 Cooper Cir., Oak Ridge, TN 37830); Parker, George W. (321 Dominion Cir., Knoxville, TN 37922)

    1995-01-01T23:59:59.000Z

    The invention is a process for direct conversion of solid radioactive waste, particularly spent nuclear fuel and its cladding, if any, into a solidified waste glass. A sacrificial metal oxide, dissolved in a glass bath, is used to oxidize elemental metal and any carbon values present in the waste as they are fed to the bath. Two different modes of operation are possible, depending on the sacrificial metal oxide employed. In the first mode, a regenerable sacrificial oxide, e.g., PbO, is employed, while the second mode features use of disposable oxides such as ferric oxide.

  14. Fusion-fission reactions with modified Woods-Saxon potential

    E-Print Network [OSTI]

    Ning Wang; Kai Zhao; Werner Scheid; Xizhen Wu

    2007-12-15T23:59:59.000Z

    A modified Woods-Saxon potential model is proposed for a unified description of the entrance channel fusion barrier and the fission barrier of fusion-fission reactions based on the Skyrme energy-density functional approach. The fusion excitation functions of 120 reactions have been systematically studied. The fusion (capture) cross sections are well described with the calculated potential and an empirical barrier distribution. Incorporating a statistical model (HIVAP code) for describing the decay of the compound nucleus, the evaporation residue (and fission) cross sections of 51 fusion-fission reactions have been systematically investigated. Optimal values of some key parameters of the HIVAP code are obtained based on the experimental data of these reactions. The experimental data are reasonably well reproduced by the calculated results. The upper and lower confidence limits of the systematic errors of the calculated results are given.

  15. Hazardous Waste Disposal Sites (Iowa)

    Broader source: Energy.gov [DOE]

    These sections contain information on fees and monitoring relevant to operators of hazardous waste disposal sites.

  16. Waste incineration and the community -

    E-Print Network [OSTI]

    Columbia University

    strategy followed by the operator of Amsterdam's waste-to- energy plant has convinced the public and other growing amounts of waste In 1992, the City of Amsterdam created Afval Energie Bedrijf (AEB), a waste-to-energy as much energy and materials as possible from municipal waste while protecting the environment. It seeks

  17. Waste to Energy Time Activities

    E-Print Network [OSTI]

    SEMINAR Waste to Energy Time Activities 9:30-9:40 Brief introduction of participants 9:40-10:10 Presentation of Dr. Kalogirou, "Waste to Energy: An Integral Part of Worldwide Sustainable Waste Management" 10. Sofia Bethanis, "Production of synthetic aggregates for use in structural concrete from waste to energy

  18. Copenhagen Waste Management and Incineration

    E-Print Network [OSTI]

    Copenhagen Waste Management and Incineration Florence, April 24 2009 Julie B. Svendsen incentives · Waste Management plan 2012 · Incineration plants #12;Florence, April 24 20093 Copenhagen Waste ownership of treatment facilities · Incineration plants · Land fill · Disposal of hazardous waste · Source

  19. Methane generation from waste materials

    DOE Patents [OSTI]

    Samani, Zohrab A. (Las Cruces, NM); Hanson, Adrian T. (Las Cruces, NM); Macias-Corral, Maritza (Las Cruces, NM)

    2010-03-23T23:59:59.000Z

    An organic solid waste digester for producing methane from solid waste, the digester comprising a reactor vessel for holding solid waste, a sprinkler system for distributing water, bacteria, and nutrients over and through the solid waste, and a drainage system for capturing leachate that is then recirculated through the sprinkler system.

  20. Certification Plan, low-level waste Hazardous Waste Handling Facility

    SciTech Connect (OSTI)

    Albert, R.

    1992-06-30T23:59:59.000Z

    The purpose of this plan is to describe the organization and methodology for the certification of low-level radioactive waste (LLW) handled in the Hazardous Waste Handling Facility (HWHF) at Lawrence Berkeley Laboratory (LBL). This plan also incorporates the applicable elements of waste reduction, which include both up-front minimization and end-product treatment to reduce the volume and toxicity of the waste; segregation of the waste as it applies to certification; an executive summary of the Waste Management Quality Assurance Implementing Management Plan (QAIMP) for the HWHF and a list of the current and planned implementing procedures used in waste certification. This plan provides guidance from the HWHF to waste generators, waste handlers, and the Waste Certification Specialist to enable them to conduct their activities and carry out their responsibilities in a manner that complies with the requirements of WHC-WAC. Waste generators have the primary responsibility for the proper characterization of LLW. The Waste Certification Specialist verifies and certifies that LBL LLW is characterized, handled, and shipped in accordance with the requirements of WHC-WAC. Certification is the governing process in which LBL personnel conduct their waste generating and waste handling activities in such a manner that the Waste Certification Specialist can verify that the requirements of WHC-WAC are met.

  1. Hazardous Waste Management (Michigan)

    Broader source: Energy.gov [DOE]

    A person shall not generate, dispose, store, treat, or transport hazardous waste in this state without complying with the requirements of this article. The department, in the conduct of its duties...

  2. Waste and Recycling

    ScienceCinema (OSTI)

    McCarthy, Kathy

    2013-05-28T23:59:59.000Z

    Nuclear engineer Dr. Kathy McCarthy talks about nuclear energy, the challenge of nuclear waste and the research aimed at solutions. For more information about nuclear energy research, visit http://www.facebook.com/idahonationallaboratory.

  3. Solid Waste Management (Kansas)

    Broader source: Energy.gov [DOE]

    This act aims to establish and maintain a cooperative state and local program of planning and technical and financial assistance for comprehensive solid waste management. No person shall construct,...

  4. UMC Construction Waste (4493)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    collect all Construction waste identified in 2006 and excess through plant sales, recycle through plant scrap metal recycle program, dispose in Y-12 on-site landfill, or ship to...

  5. Utilization of artificial nesting cavities by wood ducks (Aix sponsa) in central Texas

    E-Print Network [OSTI]

    Labuda, Stephen Edward

    1977-01-01T23:59:59.000Z

    lie study area, Brazos River study area. Measured densities were 89 trees per ha, 953 trees per ha, and 595 trees per ha, respectively , 28 INTRODUCTION The wood duck (Aix ~sonsa) is the only member of the subfamily Anatinae in North America... of the range. Prior studies on wood ducks have been carried out chief- ly east of the Nississippi River, several hundred miles east of central Texas. STUDY AREAS This study entailed observations of breeding wood ducks on three areas in central Texas (Fig...

  6. Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Bilers

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Gump, C. D.; Gupta, D. P.; Chaudhari, S.

    2013-01-01T23:59:59.000Z

    are in high demand, the cost continues to rise with the increasing demand. With increasing use, the supply of these types of fuels will keep on reducing and the cost will continue to rise. Currently, on account of a large demand for coal and wood fuels... of the pulverizer can be estimated. If the wood fuel is to be mixed in with the coal in the pulverizer, only wood in the form of sawdust ESL-IE-12-05-22 Proceedings of the 2012 Industrial Energy Technology Conference New Orleans, Louisiana, May 29-June 1, 2012...

  7. Continuous on-line measurement of lignin concentration in wood pulp

    SciTech Connect (OSTI)

    Jeffers, L.A.; Roman, G.W.

    1994-06-01T23:59:59.000Z

    We are working toward the development of an instrument for the continuous, on-line measurement of the lignin concentration in wood pulp. The instrument is based on laser induced fluorescence of the wood pulp and is to be used as a primary sensor for both feedback control of the pulping and feedforward control of bleaching. We report here the results of a series of laboratory tests that characterized the fluorescence properties of wood pulp and demonstrated a correlation between various fluorescence functions and the Kappa number of the pulps as determined by TAPPI Procedure T236.

  8. PSNH's Northern Wood power project repowers coal-fired plant with new fluidized-bed combustor

    SciTech Connect (OSTI)

    Peltier, R.

    2007-08-15T23:59:59.000Z

    The Northern Wood Power project permanently replaced a 50-MW coal-burning boiler (Unit 5) at Public Service of New Hampshire's Schiller station with a state-of-the-art circulating fluidized bed wood-burning boiler of the same capacity. The project, completed in December 2006, reduced emissions and expanded the local market for low-grade wood. For planning and executing the multiyear, $75 million project at no cost to its ratepayers, PSNH wins Power's 2007 Marmaduke Award for excellence in O & M. The award is named for Marmaduke Surfaceblow, the fictional marine engineer/plant troubleshoot par excellence. 7 figs., 1 tab.

  9. Citrus Waste Biomass Program

    SciTech Connect (OSTI)

    Karel Grohman; Scott Stevenson

    2007-01-30T23:59:59.000Z

    Renewable Spirits is developing an innovative pilot plant bio-refinery to establish the commercial viability of ehtanol production utilizing a processing waste from citrus juice production. A novel process based on enzymatic hydrolysis of citrus processing waste and fermentation of resulting sugars to ethanol by yeasts was successfully developed in collaboration with a CRADA partner, USDA/ARS Citrus and Subtropical Products Laboratory. The process was also successfully scaled up from laboratory scale to 10,000 gal fermentor level.

  10. Hanford Site annual dangerous waste report. Volume 1, Part 2, Generator dangerous waste report dangerous waste: Calendar Year 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, weight, waste description, and waste designation.

  11. Hanford Site annual dangerous waste report. Volume 1, Part 1, Generator dangerous waste report dangerous waste: Calendar Year 1993

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    This report contains information on hazardous wastes at the Hanford Site. Information consists of shipment date, physical state, chemical nature, weight, waste description, and waste designation.

  12. Idaho Waste Vitrification Facilities Project Vitrified Waste Interim Storage Facility

    SciTech Connect (OSTI)

    Bonnema, Bruce Edward

    2001-09-01T23:59:59.000Z

    This feasibility study report presents a draft design of the Vitrified Waste Interim Storage Facility (VWISF), which is one of three subprojects of the Idaho Waste Vitrification Facilities (IWVF) project. The primary goal of the IWVF project is to design and construct a treatment process system that will vitrify the sodium-bearing waste (SBW) to a final waste form. The project will consist of three subprojects that include the Waste Collection Tanks Facility, the Waste Vitrification Facility (WVF), and the VWISF. The Waste Collection Tanks Facility will provide for waste collection, feed mixing, and surge storage for SBW and newly generated liquid waste from ongoing operations at the Idaho Nuclear Technology and Engineering Center. The WVF will contain the vitrification process that will mix the waste with glass-forming chemicals or frit and turn the waste into glass. The VWISF will provide a shielded storage facility for the glass until the waste can be disposed at either the Waste Isolation Pilot Plant as mixed transuranic waste or at the future national geological repository as high-level waste glass, pending the outcome of a Waste Incidental to Reprocessing determination, which is currently in progress. A secondary goal is to provide a facility that can be easily modified later to accommodate storage of the vitrified high-level waste calcine. The objective of this study was to determine the feasibility of the VWISF, which would be constructed in compliance with applicable federal, state, and local laws. This project supports the Department of Energys Environmental Management missions of safely storing and treating radioactive wastes as well as meeting Federal Facility Compliance commitments made to the State of Idaho.

  13. Solid Waste Management Program (South Dakota)

    Broader source: Energy.gov [DOE]

    South Dakota's Solid Waste Management Program offers loans and grants for solid waste disposal, recycling, and waste tire projects. Funds are available for private or public projects, and...

  14. Independent Oversight Review, Waste Treatment and Immobilization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste Treatment and Immobilization Plant - December 2012 December 2012 Review of the Hanford Site Waste Treatment and Immobilization Plant Low Activity Waste Melter Process...

  15. SECONDARY WASTE MANAGEMENT STRATEGY FOR EARLY LOW ACTIVITY WASTE TREATMENT

    SciTech Connect (OSTI)

    CRAWFORD TW

    2008-07-17T23:59:59.000Z

    This study evaluates parameters relevant to River Protection Project secondary waste streams generated during Early Low Activity Waste operations and recommends a strategy for secondary waste management that considers groundwater impact, cost, and programmatic risk. The recommended strategy for managing River Protection Project secondary waste is focused on improvements in the Effiuent Treatment Facility. Baseline plans to build a Solidification Treatment Unit adjacent to Effluent Treatment Facility should be enhanced to improve solid waste performance and mitigate corrosion of tanks and piping supporting the Effiuent Treatment Facility evaporator. This approach provides a life-cycle benefit to solid waste performance and reduction of groundwater contaminants.

  16. Waste Treatment Plant - 12508

    SciTech Connect (OSTI)

    Harp, Benton; Olds, Erik [US DOE (United States)

    2012-07-01T23:59:59.000Z

    The Waste Treatment Plant (WTP) will immobilize millions of gallons of Hanford's tank waste into solid glass using a proven technology called vitrification. The vitrification process will turn the waste into a stable glass form that is safe for long-term storage. Our discussion of the WTP will include a description of the ongoing design and construction of this large, complex, first-of-a-kind project. The concept for the operation of the WTP is to separate high-level and low-activity waste fractions, and immobilize those fractions in glass using vitrification. The WTP includes four major nuclear facilities and various support facilities. Waste from the Tank Farms is first pumped to the Pretreatment Facility at the WTP through an underground pipe-in-pipe system. When construction is complete, the Pretreatment Facility will be 12 stories high, 540 feet long and 215 feet wide, making it the largest of the four major nuclear facilities that compose the WTP. The total size of this facility will be more than 490,000 square feet. More than 8.2 million craft hours are required to construct this facility. Currently, the Pretreatment Facility is 51 percent complete. At the Pretreatment Facility the waste is pumped to the interior waste feed receipt vessels. Each of these four vessels is 55-feet tall and has a 375,000 gallon capacity, which makes them the largest vessels inside the Pretreatment Facility. These vessels contain a series of internal pulse-jet mixers to keep incoming waste properly mixed. The vessels are inside the black-cell areas, completely enclosed behind thick steel-laced, high strength concrete walls. The black cells are designed to be maintenance free with no moving parts. Once hot operations commence the black-cell area will be inaccessible. Surrounded by black cells, is the 'hot cell canyon'. The hot cell contains all the moving and replaceable components to remove solids and extract liquids. In this area, there is ultrafiltration equipment, cesium-ion exchange columns, evaporator boilers and recirculation pumps, and various mechanical process pumps for transferring process fluids. During the first phase of pretreatment, the waste will be concentrated using an evaporation process. Solids will be filtered out, and the remaining soluble, highly radioactive isotopes will be removed using an ion-exchange process. The high-level solids will be sent to the High-Level Waste (HLW) Vitrification Facility, and the low activity liquids will be sent to the Low-Activity Waste (LAW) Vitrification Facility for further processing. The high-level waste will be transferred via underground pipes to the HLW Facility from the Pretreatment Facility. The waste first arrives at the wet cell, which rests inside a black-cell area. The pretreated waste is transferred through shielded pipes into a series of melter preparation and feed vessels before reaching the melters. Liquids from various facility processes also return to the wet cell for interim storage before recycling back to the Pretreatment Facility. (authors)

  17. Mixed waste characterization reference document

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    Waste characterization and monitoring are major activities in the management of waste from generation through storage and treatment to disposal. Adequate waste characterization is necessary to ensure safe storage, selection of appropriate and effective treatment, and adherence to disposal standards. For some wastes characterization objectives can be difficult and costly to achieve. The purpose of this document is to evaluate costs of characterizing one such waste type, mixed (hazardous and radioactive) waste. For the purpose of this document, waste characterization includes treatment system monitoring, where monitoring is a supplement or substitute for waste characterization. This document establishes a cost baseline for mixed waste characterization and treatment system monitoring requirements from which to evaluate alternatives. The cost baseline established as part of this work includes costs for a thermal treatment technology (i.e., a rotary kiln incinerator), a nonthermal treatment process (i.e., waste sorting, macronencapsulation, and catalytic wet oxidation), and no treatment (i.e., disposal of waste at the Waste Isolation Pilot Plant (WIPP)). The analysis of improvement over the baseline includes assessment of promising areas for technology development in front-end waste characterization, process equipment, off gas controls, and monitoring. Based on this assessment, an ideal characterization and monitoring configuration is described that minimizes costs and optimizes resources required for waste characterization.

  18. Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program

    Broader source: Energy.gov [DOE]

    The New Hampshire Public Utilities Commission (PUC) is offering rebates of 30% of the installed cost of qualifying new residential bulk-fed, wood-pellet central heating boilers or furnaces. The...

  19. Ground penetrating radar characterization of wood piles and the water table in Back Bay, Boston

    E-Print Network [OSTI]

    LeFranois, Suzanne O'Neil, 1980-

    2003-01-01T23:59:59.000Z

    Ground penetrating radar (GPR) surveys are performed to determine the depth to the water table and the tops of wood piles beneath a residential structure at 122 Beacon Street in Back Bay, Boston. The area of Boston known ...

  20. A study of owner preferences for steel and wood framed homes

    E-Print Network [OSTI]

    Bateman, Bruce Whitney

    1997-01-01T23:59:59.000Z

    that purchased steel framed homes (SFHS) and those households that purchased wood framed homes (WFHs). The objectives of the study were (1) to determine if there were any significant differences in the demographic profiles of the two study groups, (2...