Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Qualifying Wood Stove Deduction | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Qualifying Wood Stove Deduction Qualifying Wood Stove Deduction Qualifying Wood Stove Deduction < Back Eligibility Residential Savings Category Bioenergy Maximum Rebate 500 Program Info Start Date 1/1/1994 State Arizona Program Type Personal Deduction Rebate Amount Total cost, exclusive of taxes, interest and other finance charges Provider Arizona Department of Revenue This incentive allows Arizona taxpayers to deduct the cost of converting an existing wood fireplace to a qualifying wood stove. The cost to purchase and install all necessary equipment is tax deductible, up to a maximum $500 deduction. Qualifying wood stoves must meet the standards of performance for new wood heaters manufactured after July 1990, or sold after July 1992 pursuant to [http://www.epa.gov/oecaerth/resources/policies/monitoring/caa/woodstover...

2

Qualifying Wood Stove Deduction (Idaho) | Open Energy Information  

Open Energy Info (EERE)

Share this page on Facebook icon Twitter icon Qualifying Wood Stove Deduction (Idaho) This is the approved revision of this page, as well as being the most recent. Jump...

3

Marin County- Wood Stove Replacement Rebate Program  

Energy.gov (U.S. Department of Energy (DOE))

The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and fireplace inserts) with cleaner burning stoves...

4

Pellet stoves wood energy for all  

Science Conference Proceedings (OSTI)

While it`s true that specialized pellet stoves, capable of burning fuels as diverse as reprocessed paper waste and feed corn, are expensive and occasionally clunky, they also represent one of the best hopes for introducing clean burning, reliable renewable energy to those now heating with gas and oil. This article explores the benefits and operation of the stoves including discussions of the following: ecological benefits, combustion, stove venting, ashes, costs, fuels, and the future of wood heat. 1 tab.

NONE

1995-10-01T23:59:59.000Z

5

Wood-Burning Heating System Deduction  

Energy.gov (U.S. Department of Energy (DOE))

This statute allows individual taxpayers a deduction for the purchase and installation of a wood-burning heating system. The deduction is equal to the total cost of purchase and installation for...

6

Marin County - Wood Stove Replacement Rebate Program (California...  

Open Energy Info (EERE)

DSIRE1 Summary The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and...

7

Clean-Burning Wood Stove Grant Program (Maryland) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clean-Burning Wood Stove Grant Program (Maryland) Clean-Burning Wood Stove Grant Program (Maryland) Clean-Burning Wood Stove Grant Program (Maryland) < Back Eligibility Residential Savings Category Bioenergy Program Info Start Date 09/07/2012 State Maryland Program Type State Rebate Program Rebate Amount Stick Burning Stove: $500 Pellet Burning Stove: $700 The Maryland Energy Administration (MEA) now offers the Clean Burning Wood Stove Grant program as part of its Residential Clean Energy Grant Program. The Clean Burning Wood Stove Grant program offers a flat grant award of $500 for stick burning wood stoves and $700 for pellet burning wood stoves that meet program eligibility requirements. Basic requirements for grant funding include: *The property must serve as primary residence *Clean burning wood stove must replace existing electric or non-natural gas

8

Experience with improved charcoal and wood stoves for households and institutions in Kenya  

SciTech Connect

Efforts at promoting more fuel-efficient charcoal stoves to replace traditional charcoal stoves in Kenya offer some lessons for the dissemination of appropriate technologies. This paper looks at the market-based approach which has made the Kenyan charcoal stoves project a success. Trends in woodfuels (wood and charcoal) consumption in Kenya are identified; the traditional technology for charcoal combustion and the upgraded traditional technologies are described; production achievement and the dissemination and promotion strategy used are examined; and a financial and economic analysis is performed with social, health and environmental effects assessed. Other ways to achieve a more favourable balance between woodfuels consumption and supply are then discussed looking at more efficient charcoal kilns and household woodstoves, improved institutional stoves and increased wood production. The replication potential of the Kenya experiment in other countries is also explored. The lessons learnt from the the Kenya experience concern the relationship between technology, choice and delivery systems as they interact with, economic, institutional, and policy factors. In this case, the design work accepted the traditional technology as a starting point which helped ensure widespread acceptance by households. The potential desirability of relying on local artisans to manufacture consumer durables using existing private sector channels to market these goods is also shown. It also highlights the importance of going beyond a laissez-faire approach and supporting training, demonstration, and publicity to faciliate the workings of the private sector. In the Kenyan case, technology choice was relatively unsubsidized and left ot the preferences of consumers.

Hyman, E.L.

1985-01-01T23:59:59.000Z

9

Definition: Biomass Cook Stove | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Biomass Cook Stove Jump to: navigation, search Dictionary.png Biomass Cook Stove A Stove that is heated by burning wood, charcoal, animal dung or crop residue. Cook stoves are the most common way of cooking and heating food in developing countries.[1] View on Wikipedia Wikipedia Definition "Cooking stove" redirects here. For a kitchen cooker, stove, range, oven, or stove top, see Kitchen stove. In cooking, a cook stove is heated by burning wood, charcoal, animal dung or crop residue. Cook stoves are commonly used for cooking and heating food in developing countries. Developing countries consume little energy compared to developed nations; however, over 50% of the energy that they do use goes into cooking food.

10

Catalytic stove  

Science Conference Proceedings (OSTI)

This patent describes a stove including a stove housing having a burning chamber, a bottom wall, side walls, a top wall and an effluent outlet flue. The improvement described here consists of: a domed wall interposed between the burning chamber and the top wall and including a catalyst substantially at the peak of the domed wall, the catalyst being in effluent communication with the flue; the domed wall and side walls comprising a substantially smooth path for an effluent emitted from a burning fuel such that the effluent emitted remains in a substantially combustible gaseous state in the burning chamber as it reaches the top of the domed wall; an air inlet into the burning chamber having a selectively controllable opening at one terminal end exposed to the environment of the stove; and wherein the amount of air entering the burning chamber is selectively controlled by an apparatus comprising: a thermostat attached to the stove; means for defining a thermostat aperture; moveable means for adjusting the effective size of the thermostat aperture; thermal control unit means for detecting changes in the temperature of the stove to which the thermostat is attached and for moving the moveable means for adjusting the effective size of the thermostat aperture as a function of the change in temperature; and, the moveable means, the means for defining a thermostat aperture and the thermal control unit means cooperating to cause the effective area of the thermostat aperture to change by an amount approximately proportional to the square of the change in temperature of the stove, the effective area being increased responsive to a fall in the stove temperature and being decreased responsive to a rise in the stove temperature.

Barnett, S.G.

1986-04-08T23:59:59.000Z

11

Sociology of a stove  

SciTech Connect

A brief review of the acceptance and use made of the Lorena cooking stove in Guatemala. The stove is designed to contain heat, conserve fuel and reduce smoke.

Shaller, D.V.

1982-01-01T23:59:59.000Z

12

Success Stories: The Berkeley Darfur Stove  

The Berkeley Darfur Stove is a high-efficiency outdoor cooking stove with improved heat transfer characteristics, high combustion under draft, improved mechanical ...

13

Focused natural deduction  

Science Conference Proceedings (OSTI)

Natural deduction for intuitionistic linear logic is known to be full of non-deterministic choices. In order to control these choices, we combine ideas from intercalation and focusing to arrive at the calculus of focused natural deduction. The calculus ...

Taus Brock-Nannestad; Carsten Schürmann

2010-10-01T23:59:59.000Z

14

Automated deduction for verification  

Science Conference Proceedings (OSTI)

Automated deduction uses computation to perform symbolic logical reasoning. It has been a core technology for program verification from the very beginning. Satisfiability solvers for propositional and first-order logic significantly automate the task ...

Natarajan Shankar

2009-10-01T23:59:59.000Z

15

First Arkansas Mill of its kind turns sawdust into stove pellets  

Science Conference Proceedings (OSTI)

This article describes a new mill in Arkansas that converts waste sawdust into pellets for use in a new kind of stove like the ones two Resource Conservation and Development Districts placed in 20 districts as a demonstration project. A review of the wood pellet industry and of this particular project is provided.

NONE

1994-12-31T23:59:59.000Z

16

Wood and Pellet Heating | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood and Pellet Heating Wood and Pellet Heating Wood and Pellet Heating November 25, 2013 - 2:24pm Addthis A wood stove on a stone hearth. | Photo courtesy of ©iStockphoto/King_Louie A wood stove on a stone hearth. | Photo courtesy of ©iStockphoto/King_Louie What does this mean for me? Wood or pellets may be an economical and environmentally sound heating fuel choice. If you live in an area where you can cut your own wood for heating, your fuel will be local and inexpensive. Today you can choose from a new generation of wood- and pellet-burning appliances that are cleaner burning, more efficient, and powerful enough to heat many average-sized, modern homes. Pellet fuel appliances burn small pellets that measure 3/8 to 1 inch in length. Choosing and Installing Wood- and Pellet-Burning Appliances

17

Biomass Equipment & Materials Compensating Tax Deduction | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Equipment & Materials Compensating Tax Deduction Biomass Equipment & Materials Compensating Tax Deduction Eligibility Commercial Industrial Savings For Bioenergy Biofuels...

18

Development and Testing of the Berkeley Darfur Stove  

NLE Websites -- All DOE Office Websites (Extended Search)

Development and Testing of the Berkeley Darfur Stove Development and Testing of the Berkeley Darfur Stove Title Development and Testing of the Berkeley Darfur Stove Publication Type Report LBNL Report Number LBNL-116E Year of Publication 2008 Authors Amrose, Susan, G. Theodore Kisch, Charles Kirubi, Jesse Woo, and Ashok J. Gadgil Date Published 03/2008 Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract Darfur, one of the poorest regions in Sudan, has been in the midst of a complicated and bloody conflict since 2003 that has resulted in the displacement of 2.2 million citizens. The displaced, known as Internally Displaced Persons (IDPs), are crowded into refugee camps scattered across the region with low fuelwood productivity and no alternative means of fuel. Unsustainable harvesting has led to increasing zones of total denudation around the camps, now extending several kilometers in all directions from the camp boundaries. Women who leave the camp to fetch fuelwood are subject to rape and mutilation due to the continuing conflict.In November of 2005, a team of scientists from LBNL visited Darfur to assess the potential of fuel-efficient stoves ("FES") as a means to mitigate the fuelwood shortage. In addition to conducting a systematic informal survey, the team found that a metal FES, known as the Tara, required 50% less fuelwood to cook an IDP meal than the inefficient three-stone-fire used by 90% of the IDPs. The LBNL team emerged from the triprecommending a metal FES based on the Tara, but with two specific design modifications to make it suitable for conditions in Darfur. These included improving the mechanical stability of the stove during vigorous stirring, and maintaining or improving performance during a breeze. In Spring 2006, an interdisciplinary team of four Berkeley students (3 graduate and 1 senior undergraduate) took on the project of designing, fabricating, and testing the recommended modifications as part of a UC-Berkeley course entitled Design forSustainable Communities. Under the guidance of Prof. Ashok Gadgil, the students designed several modifications to improve stove performance in windy weather, including a wind-shield around the upper stove body, and the addition of a metal ring to prevent direct air flow through the stove body. Stakes were also added to the stove body to improve stability during vigorous stirring. The students fabricated a prototype fortesting, known as the "Berkeley Darfur Stove," or BDS. Since no existing stove test was relevant to the conditions of Darfur, a new protocol, known as the Darfur Cooking Test (DCT), was developed by the students to compare the fuel efficiency of two stoves. This protocol is specific to the conditions in Darfur, incorporating both windy and non-windy conditions, along with the cooking pots, food preparation methods, and meals employed by IDPs. The complete DCT protocol is presented in Appendices 1 and 2. The BDS prototype was tested against the original Tara stove using the newly developed DCT along with a simple tipping test (to compare stability). Fuelwood usage by the BDS was found to be consistently less than that of the Tara stove under all tested conditions. Compared to the Tara, the BDS was found to save 56% (with wind) and 40% (without wind) of the fuelwood required to cook sauce-like mulah (one of two staple IDP foods)and to save 74% (with wind) and 8% (without wind) of the fuelwood required to cook the dough-like assida (the other staple food). Using these numbers, the BDS was found to have a net annual fuelwood savings of 72% over the three-stone-fire in Darfur. The 4 stability of the BDS during stirring was also found to be much better than the Tara, requiring > 117 N of lateral force to tip compared to just 22 N. Implications of full adoption of the BDS throughout Darfur include saving 370 million kg of fuelwood per year, along with a monetary savings of US $222 per family per year for IDPs who buy fuelwood or a savings of 18 hours of labor effort per week for IDPs who currently collect fuelwood. Annual avoided CO2 emissions would come to 6 million tonnes per year worth $12 million annually assuming the lowest market price of $3 per tonne1 of CO2. Most significantly, the risk of rape and mutilation for those who collect fuelwood would be reduced by three-quarters. Additional expected benefits include substantial reduction in the inhalation of harmful wood-smoke by IDP women and girls, and significant reduction in the risk of fire to the IDP shelters because the BDS fully encloses the open flames.

19

Experimenting with deduction modulo  

Science Conference Proceedings (OSTI)

Deduction modulo is a generic framework to describe proofs in a theory better than using raw axioms. This is done by presenting the theory through rules rewriting terms and propositions. In CSL 2010, LNCS 6247, p.155-169, we gave theoretical justifications ...

Guillaume Burel

2011-07-01T23:59:59.000Z

20

Wood and energy in connecticut. Staff report  

SciTech Connect

Telephone surveys of Connecticut households conducted in 1979 indicate a transition to wood heating in response to a series of conventional energy price increases and uncertainty in conventional energy supplies. Connecticut households consumed 668,000 cords of wood in the winter of 1978-79. The airtight wood stove has become the most commonly used wood-burning apparatus. Survey data of residential wood cutting, purchasing, and burning were analyzed by household tenure, wood-burning apparatus, and county. Residential use of wood for energy constitutes a new demand on the forest resource, increases local income and employment, displaces fuel oil and electricity, but may compromise household safety.

Bailey, M.R.; Wheeling, P.R.; Lenz, M.I.

1983-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Tax Deduction Qualified Software  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deduction Qualified Software Tax Deduction Qualified Software EnergyGauge Summit version 3.21 On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 3 September 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Florida Solar Energy Center 1679 Clearlake Road

22

Availability of wood as a heating fuel for Colorado  

SciTech Connect

As Colorado homeowners turn to wood as an alternative space-heating fuel, supplies--particularly along the heavily populated Front Range--dwindle. The report reexamines the resource base and presents alternatives to wood in the event of a shortage (for instance, many wood stoves can burn coal as well).

1982-01-01T23:59:59.000Z

23

Personal Deduction | Open Energy Information  

Open Energy Info (EERE)

Deduction Deduction Jump to: navigation, search Personal tax incentives include personal income tax credits and deductions. Many states offer these incentives to reduce the expense of purchasing and installing renewable energy or energy efficiency systems and equipment. The percentage of the credit or deduction varies by state, and in most cases, there is a maximum limit on the dollar amount of the credit or deduction. An allowable credit may include carryover provisions, or it may be structured so that the credit is spread out over a certain number of years. Eligible technologies vary widely by state. In recent years, the federal government has offered personal tax incentives for renewables and energy efficiency. [1] Personal Deduction Incentives CSV (rows 1 - 13)

24

Tax Deductions for Commercial Buildings  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of interest to businesses, including incen- tives for distributed generation and hybrid fuel fleet vehicles. Tax Deductions for Commercial Building Owners Commercial building...

25

Alternative Fuels Data Center: Biofuels Tax Deduction  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biofuels Tax Deduction Biofuels Tax Deduction to someone by E-mail Share Alternative Fuels Data Center: Biofuels Tax Deduction on Facebook Tweet about Alternative Fuels Data Center: Biofuels Tax Deduction on Twitter Bookmark Alternative Fuels Data Center: Biofuels Tax Deduction on Google Bookmark Alternative Fuels Data Center: Biofuels Tax Deduction on Delicious Rank Alternative Fuels Data Center: Biofuels Tax Deduction on Digg Find More places to share Alternative Fuels Data Center: Biofuels Tax Deduction on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biofuels Tax Deduction A business and occupation tax deduction is available for the sale or distribution of biodiesel or E85 motor fuel. This deduction is available until July 1, 2015. (Reference Revised Code of Washington 82.04.4334

26

Corporate Deduction | Open Energy Information  

Open Energy Info (EERE)

Corporate Deduction Corporate Deduction Jump to: navigation, search Corporate tax incentives include corporate tax credits, deductions and exemptions. These incentives are available in some states to corporations that purchase and install eligible renewable energy or energy efficiency equipment, or to construct green buildings. In a few cases, the incentive is based on the amount of energy produced by an eligible facility. Some states allow the tax credit only if a corporation has invested a minimum amount in an eligible project. Typically, there is a maximum limit on the dollar amount of the credit or deduction. In recent years, the federal government has offered corporate tax incentives for renewables and energy efficiency. (Note that corporate tax incentives designed to recruit or

27

Tax Deductions for Commercial Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deductions for Commercial Buildings Tax Deductions for Commercial Buildings Promoting Energy Savings for Businesses S igned by President Bush on August 8, 2005, the Energy Policy Act (EPACT) lays the foundation for the new Federal tax incentives for consumers and businesses that pursue energy efficiency and the use of renewable energy. For updated information about the tax incentives, see www.energy.gov. This web- site also describes other EPACT provisions of interest to businesses, including incen- tives for distributed generation and hybrid fuel fleet vehicles. Tax Deductions for Commercial Building Owners Commercial building owners and lessees who purchase and install energy-saving products in their businesses can qualify for a tax deduction under EPACT. Buildings must achieve a 50 percent reduction in

28

Quantifying Stove Emissions Related to Different Use Patterns for the  

NLE Websites -- All DOE Office Websites (Extended Search)

Stove Emissions Related to Different Use Patterns for the Stove Emissions Related to Different Use Patterns for the Silver-mini (Small Turkish) Space Heating Stove Title Quantifying Stove Emissions Related to Different Use Patterns for the Silver-mini (Small Turkish) Space Heating Stove Publication Type Report LBNL Report Number LBNL-6319E Year of Publication 2013 Authors Maddalena, Randy L., Melissa M. Lunden, Daniel Wilson, Cristina Ceballos, Thomas W. Kirchstetter, Jonathan L. Slack, and Larry L. Dale Publisher Lawrence Berkeley National Laboratory City Berkeley Abstract Air pollution levels in Ulaanbaatar, Mongolia's capital, are among the highest in the world. A primary source of this pollution is emissions from traditional coal-burning space heating stoves used in the Ger (tent) regions around Ulaanbaatar. Significant investment has been made to replace traditional heating stoves with improved low-emission high-efficiency stoves. Testing performed to support selection of replacement stoves or for optimizing performance may not be representative of true field performance of the improved stoves. Field observations and lab measurements indicate that performance is impacted, often adversely, by how stoves are actually being used in the field. The objective of this project is to identify factors that influence stove emissions under typical field operating conditions and to quantify the impact of these factors. A highly-instrumented stove testing facility was constructed to allow for rapid and precise adjustment of factors influencing stove performance. Tests were performed using one of the improved stove models currently available in Ulaanbaatar. Complete burn cycles were conducted with Nailakh coal from the Ulaanbaatar region

29

Alternative Fuels Data Center: Biodiesel Tax Deduction  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biodiesel Tax Biodiesel Tax Deduction to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Tax Deduction on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Tax Deduction on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Tax Deduction on Google Bookmark Alternative Fuels Data Center: Biodiesel Tax Deduction on Delicious Rank Alternative Fuels Data Center: Biodiesel Tax Deduction on Digg Find More places to share Alternative Fuels Data Center: Biodiesel Tax Deduction on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biodiesel Tax Deduction Entities and individuals that receive biodiesel consisting of 99% vegetable oil or animal fat are eligible for a tax deduction for the fuel, provided

30

Relocated Business Tax Credit or Deduction (Wisconsin) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Relocated Business Tax Credit or Deduction (Wisconsin) Relocated Business Tax Credit or Deduction (Wisconsin) Eligibility Agricultural Commercial Developer Fuel Distributor...

31

Benefit Summary Deductible -Individual $250  

E-Print Network (OSTI)

Facility $50 after deductible Outpatient Diagnostic Services - Lab - No Additional Copay Laboratory in Exclusions) Well Baby/Child Care (Services provided at appropriate age intervals to age 21.) Periodic Health Anesthesia and Physician Visits Services and Supplies Laboratory/Radiology/Diagnostic Testing All Other

Oklahoma, University of

32

Quantum deduction rules (preliminary version)  

E-Print Network (OSTI)

Quantum deduction rules (preliminary version) Pavel Pudlâ??ak # March 27, 2007 Abstract We define propositional quantum Frege proof systems and compare it with classical Frege proof systems. 1 Introduction In this paper we shall address the question whether quantum circuits could help us prove theorems faster than

Pudlák, Pavel

33

Natural Gas Stove Emissions and Respiratory Health: Evidence...  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Stove Emissions and Respiratory Health: Evidence from NHANES III NOTICE Due to the current lapse of federal funding, Berkeley Lab websites are accessible, but may not...

34

Wood power - its potential in our energy crisis  

Science Conference Proceedings (OSTI)

Wood is meeting about 2% of total U.S. energy needs and may eventually supply up to 7% of our nation's energy. Many forms of direct combustion equipment are available for residential heating and range from supplemental wood-burning stoves to complete house-heating multi-fuel furnaces. A recent survey conducted in New York indicated that one-third of the people contacted used wood for home heating. The total amount of fuelwood used in New York State in 1978 amounted to 1,716,000 standard cords. A Wisconsin study indicates that more than 1.2 million cords of firewood were burned by Wisconsin households during the 1979-80 heating season. A Pennsylvania survey indicated that 22% of single family households used wood for home heating. Corning Glass Works recently conducted a wood-burning stove market survey and found that 18% of all U.S. households own wood-burning stoves. On the basis of cost per unit of heat, wood heat is cheaper than its next closest commonly available rival (fuel oil) and is also cheaper than anthracite coal and electricity. Industrial wood-burning furnaces are commonly incorporated into boiler systems. Nearly 1700 wood-fired boiler systems are in operation in the United States. The economic value of a wood fuel will depend on its heating value and moisture content. For an indsutry considering use of densified wood for fuel, there is a question of whether the added expense is justified by increased ease of handling and improved burning efficiency. Where high sulfur emissions from coal are a problem, burning sulfur-free pellets in combination with coal may be a solution. In Maine a $3 million pellet-making plant is producing 600 tons of pellets per day. Nationally, the overall generating capacity of all known electrical generating plants using wood and wood derived fuels is about 4500 megawatts. Wood can be processed to produce liquid fuels and other chemicals.

Johnson, W.W.

1982-01-01T23:59:59.000Z

35

Energy Efficiency Indicators Methodology Booklet  

E-Print Network (OSTI)

Kerosene lamp Wood Stove Biogas Stove Charcoal Stove CoalDistrict heating Wood Biogas Charcoal Stove/ Room Coal

Sathaye, Jayant

2010-01-01T23:59:59.000Z

36

Puerto Rico - Tax Deduction for Solar and Wind Energy Systems...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Puerto Rico - Tax Deduction for Solar and Wind Energy Systems Puerto Rico - Tax Deduction for Solar and Wind Energy Systems Eligibility Residential Savings For Heating & Cooling...

37

Carbon Dioxide Capture/Sequestration Tax Deduction (Kansas) ...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Carbon Dioxide CaptureSequestration Tax Deduction (Kansas) Carbon Dioxide CaptureSequestration Tax Deduction (Kansas) Eligibility Commercial Industrial Utility Program...

38

Wood and energy in New Hampshire. Staff report  

SciTech Connect

Telephone surveys of New Hampshire households conducted in 1979 and 1980 indicate a transition to wood heating in response to a series of conventional energy price increases and uncertainty in conventional energy supplies. New Hampshire households consumed 394,000 cords of wood in the winter of 1978-79; 504,000 cords were burnt during the next winter. The airtight wood stove has become the most commonly used wood-burning apparatus. Survey data of residential wood cutting, purchasing, and burning were analyzed by household tenure, wood-burning apparatus, and county. Residential use of wood for energy constitutes a new demand on the forest resource, increases local income and employment, displaces fuel oil and electricity, and may compromise household safety.

Bailey, M.R.; Wheeling, P.R.

1982-06-01T23:59:59.000Z

39

Deductive Hardware Design: A Functional Approach  

Science Conference Proceedings (OSTI)

The goal of deductive design is the systematic construction of a system implementation starting from its behavioural specification according to formal, provably correct rules. We use Haskell to formulate a functional model of directional, synchronous ...

Bernhard Möller

1998-01-01T23:59:59.000Z

40

Biomass Equipment & Materials Compensating Tax Deduction  

Energy.gov (U.S. Department of Energy (DOE))

In 2005 New Mexico adopted a policy to allow businesses to deduct the value of biomass equipment and biomass materials used for the processing of biopower, biofuels or biobased products in...

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Improved Biomass Cooking Stoves | Open Energy Information  

Open Energy Info (EERE)

Improved Biomass Cooking Stoves Improved Biomass Cooking Stoves Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Improved Biomass Cooking Stoves Agency/Company /Organization: various Sector: Energy Focus Area: Biomass Phase: Determine Baseline, Evaluate Options, Prepare a Plan, Create Early Successes Topics: Co-benefits assessment, - Energy Access Resource Type: Case studies/examples, Guide/manual, Presentation, Video User Interface: Website Website: ttp://www.bioenergylists.org/ Cost: Free Language: "English, Spanish; Castilian" is not in the list of possible values (Abkhazian, Achinese, Acoli, Adangme, Adyghe; Adygei, Afar, Afrihili, Afrikaans, Afro-Asiatic languages, Ainu, Akan, Akkadian, Albanian, Aleut, Algonquian languages, Altaic languages, Amharic, Angika, Apache languages, Arabic, Aragonese, Arapaho, Arawak, Armenian, Aromanian; Arumanian; Macedo-Romanian, Artificial languages, Assamese, Asturian; Bable; Leonese; Asturleonese, Athapascan languages, Australian languages, Austronesian languages, Avaric, Avestan, Awadhi, Aymara, Azerbaijani, Balinese, Baltic languages, Baluchi, Bambara, Bamileke languages, Banda languages, Bantu (Other), Basa, Bashkir, Basque, Batak languages, Beja; Bedawiyet, Belarusian, Bemba, Bengali, Berber languages, Bhojpuri, Bihari languages, Bikol, Bini; Edo, Bislama, Blin; Bilin, Blissymbols; Blissymbolics; Bliss, Bosnian, Braj, Breton, Buginese, Bulgarian, Buriat, Burmese, Caddo, Catalan; Valencian, Caucasian languages, Cebuano, Celtic languages, Central American Indian languages, Central Khmer, Chagatai, Chamic languages, Chamorro, Chechen, Cherokee, Cheyenne, Chibcha, Chichewa; Chewa; Nyanja, Chinese, Chinook jargon, Chipewyan; Dene Suline, Choctaw, Chuukese, Chuvash, Classical Newari; Old Newari; Classical Nepal Bhasa, Classical Syriac, Coptic, Cornish, Corsican, Cree, Creek, Creoles and pidgins , Crimean Tatar; Crimean Turkish, Croatian, Cushitic languages, Czech, Dakota, Danish, Dargwa, Delaware, Dinka, Divehi; Dhivehi; Maldivian, Dogri, Dogrib, Dravidian languages, Duala, Dutch; Flemish, Dyula, Dzongkha, Eastern Frisian, Efik, Egyptian (Ancient), Ekajuk, Elamite, English, Erzya, Esperanto, Estonian, Ewe, Ewondo, Fang, Fanti, Faroese, Fijian, Filipino; Pilipino, Finnish, Finno-Ugrian languages, Fon, French, Friulian, Fulah, Ga, Gaelic; Scottish Gaelic, Galibi Carib, Galician, Ganda, Gayo, Gbaya, Geez, Georgian, German, Germanic languages, Gilbertese, Gondi, Gorontalo, Gothic, Grebo, Greek, Modern, Guarani, Gujarati, Gwich'in, Haida, Haitian; Haitian Creole, Hausa, Hawaiian, Hebrew, Herero, Hiligaynon, Himachali languages; Western Pahari languages, Hindi, Hiri Motu, Hittite, Hmong; Mong, Hungarian, Hupa, Iban, Icelandic, Ido, Igbo, Ijo languages, Iloko, Inari Sami, Indic languages, Indo-European languages, Indonesian, Ingush, Interlingue; Occidental, Inuktitut, Inupiaq, Iranian languages, Irish, Iroquoian languages, Italian, Japanese, Javanese, Judeo-Arabic, Judeo-Persian, Kabardian, Kabyle, Kachin; Jingpho, Kalaallisut; Greenlandic, Kalmyk; Oirat, Kamba, Kannada, Kanuri, Kara-Kalpak, Karachay-Balkar, Karelian, Karen languages, Kashmiri, Kashubian, Kawi, Kazakh, Khasi, Khoisan languages, Khotanese; Sakan, Kikuyu; Gikuyu, Kimbundu, Kinyarwanda, Kirghiz; Kyrgyz, Klingon; tlhIngan-Hol, Komi, Kongo, Konkani, Korean, Kosraean, Kpelle, Kru languages, Kuanyama; Kwanyama, Kumyk, Kurdish, Kurukh, Kutenai, Ladino, Lahnda, Lamba, Land Dayak languages, Lao, Latin, Latvian, Lezghian, Limburgan; Limburger; Limburgish, Lingala, Lithuanian, Lojban, Lower Sorbian, Lozi, Luba-Katanga, Luba-Lulua, Luiseno, Lule Sami, Lunda, Luo (Kenya and Tanzania), Lushai, Luxembourgish; Letzeburgesch, Macedonian, Madurese, Magahi, Maithili, Makasar, Malagasy, Malay, Malayalam, Maltese, Manchu, Mandar, Mandingo, Manipuri, Manobo languages, Manx, Maori, Mapudungun; Mapuche, Marathi, Mari, Marshallese, Marwari, Masai, Mayan languages, Mende, Mi'kmaq; Micmac, Minangkabau, Mirandese, Mohawk, Moksha, Mon-Khmer languages, Mongo, Mongolian, Mossi, Multiple languages, Munda languages, N'Ko, Nahuatl languages, Nauru, Navajo; Navaho, Ndebele, North; North Ndebele, Ndebele, South; South Ndebele, Ndonga, Neapolitan, Nepal Bhasa; Newari, Nepali, Nias, Niger-Kordofanian languages, Nilo-Saharan languages, Niuean, North American Indian languages, Northern Frisian, Northern Sami, Norwegian, Nubian languages, Nyamwezi, Nyankole, Nyoro, Nzima, Occitan (post 1500); Provençal, Ojibwa, Oriya, Oromo, Osage, Ossetian; Ossetic, Otomian languages, Pahlavi, Palauan, Pali, Pampanga; Kapampangan, Pangasinan, Panjabi; Punjabi, Papiamento, Papuan languages, Pedi; Sepedi; Northern Sotho, Persian, Philippine languages, Phoenician, Pohnpeian, Polish, Portuguese, Prakrit languages, Pushto; Pashto, Quechua, Rajasthani, Rapanui, Rarotongan; Cook Islands Maori, Romance languages, Romanian; Moldavian; Moldovan, Romansh, Romany, Rundi, Russian, Salishan languages, Samaritan Aramaic, Sami languages, Samoan, Sandawe, Sango, Sanskrit, Santali, Sardinian, Sasak, Scots, Selkup, Semitic languages, Serbian, Serer, Shan, Shona, Sichuan Yi; Nuosu, Sicilian, Sidamo, Sign Languages, Siksika, Sindhi, Sinhala; Sinhalese, Sino-Tibetan languages, Siouan languages, Skolt Sami, Slave (Athapascan), Slavic languages, Slovak, Slovenian, Sogdian, Somali, Songhai languages, Soninke, Sorbian languages, Sotho, Southern, South American Indian (Other), Southern Altai, Southern Sami, Spanish; Castilian, Sranan Tongo, Sukuma, Sumerian, Sundanese, Susu, Swahili, Swati, Swedish, Swiss German; Alemannic; Alsatian, Syriac, Tagalog, Tahitian, Tai languages, Tajik, Tamashek, Tamil, Tatar, Telugu, Tereno, Tetum, Thai, Tibetan, Tigre, Tigrinya, Timne, Tiv, Tlingit, Tok Pisin, Tokelau, Tonga (Nyasa), Tonga (Tonga Islands), Tsimshian, Tsonga, Tswana, Tumbuka, Tupi languages, Turkish, Turkmen, Tuvalu, Tuvinian, Twi, Udmurt, Ugaritic, Uighur; Uyghur, Ukrainian, Umbundu, Uncoded languages, Undetermined, Upper Sorbian, Urdu, Uzbek, Vai, Venda, Vietnamese, Volapük, Votic, Wakashan languages, Walamo, Walloon, Waray, Washo, Welsh, Western Frisian, Wolof, Xhosa, Yakut, Yao, Yapese, Yiddish, Yoruba, Yupik languages, Zande languages, Zapotec, Zaza; Dimili; Dimli; Kirdki; Kirmanjki; Zazaki, Zenaga, Zhuang; Chuang, Zulu, Zuni) for this property.

42

Experimental analysis of stove top designs for pine needle combustion in a semi-gasifier burner  

E-Print Network (OSTI)

The motivation behind this project was to develop a better understanding of the role that the stove top plays in a stove where pine needles are the main fuel source. Pine needles have distinct characteristics in their ...

Roqué, Alyssa J

2011-01-01T23:59:59.000Z

43

Natural Gas Stove Emissions and Respiratory Health: Evidence from NHANES  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Gas Stove Emissions and Respiratory Health: Evidence from NHANES Natural Gas Stove Emissions and Respiratory Health: Evidence from NHANES III Speaker(s): Ronald Briggs Date: August 15, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Brett Singer Do emissions from natural gas stoves in American homes degrade respiratory health? The combustion of natural gas yields byproducts such as NOx , PM2.5 , and CO that the US EPA regulates outdoors. But while ambient air quality has improved in the US over the last few decades as a consequence of the Clean Air Act of and its amendments, the prevalence of asthma and morbidity and mortality associated with asthma continue to rise (Mannino /et al./, 1998). Concentrations of most air pollutants are higher indoors than outdoors in the US, however, and people in the US spend more than 90%

44

Fuel-Efficient Stove Programs in Humanitarian Settings | Open Energy  

Open Energy Info (EERE)

Fuel-Efficient Stove Programs in Humanitarian Settings Fuel-Efficient Stove Programs in Humanitarian Settings Jump to: navigation, search Tool Summary Name: Fuel-Efficient Stove Programs in Humanitarian Settings Agency/Company /Organization: USAID Sector: Energy Focus Area: Biomass, Energy Efficiency Phase: Evaluate Options, Prepare a Plan, Evaluate Effectiveness and Revise as Needed Resource Type: Guide/manual, Lessons learned/best practices, Presentation, Publications User Interface: Spreadsheet, Website Website: www.energytoolbox.org/cookstoves/ Cost: Free Language: English A step-by-step process of assessment, planning, implementation, and monitoring and evaluation of a Cookstove activity This Toolkit is designed to take you and your organization through a step-by-step process of assessment, planning, implementation, and

45

Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Fuel Cell Motor Fuel Cell Motor Vehicle Tax Deduction to someone by E-mail Share Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on Facebook Tweet about Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on Twitter Bookmark Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on Google Bookmark Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on Delicious Rank Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on Digg Find More places to share Alternative Fuels Data Center: Fuel Cell Motor Vehicle Tax Deduction on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Fuel Cell Motor Vehicle Tax Deduction A taxpayer is eligible for a $2,000 tax deduction for the purchase of a

46

High-Deductible Health Plan (HDHP)  

NLE Websites -- All DOE Office Websites (Extended Search)

HDHP HDHP High-Deductible Health Plan (HDHP) Blue Cross Blue Shield of New Mexico (BCBSNM) is the provider of retiree medical benefits. Contact Aon Hewitt, Your Benefit Resources (YBR) 866-934-1200 The 2014 High-Deductible Health Plan (HDHP) for non-Medicare retirees is a medical insurance plan with a lower premium but higher deductible than the 2014 Preferred Provider Organization (PPO) Plan. 2014 Medical Plan Comparison (pdf) HDHP Summary of Benefits and Coverage (pdf) Costs 2014 Non-Medicare Retiree Premium Rates (pdf) Eligibility LANS Health & Welfare Benefit Plan for Retirees (pdf) - see Eligibility Requirements In- and out-of-network coverage The HDHP offers in- and out-of-network coverage, but out-of-network coverage is more expensive. Participants are responsible for determining if a provider is in the

47

Fire prevention in gas stove with gas sensors  

Science Conference Proceedings (OSTI)

This paper presents to use gas sensors to implement a safer home from a fire caused by the gas stove. Nowadays, the ratio of the families that consist of one person or old people only is increasing and thus the probability of the fire caused by forgetting ... Keywords: fire prevention, gas sensors, smart home

Soojung Kang, Bitna Song, Ilhoon Shin

2013-07-01T23:59:59.000Z

48

Biomass Stoves and Lens Opacity and Cataract in Nepalese Women  

E-Print Network (OSTI)

Biomass Stoves and Lens Opacity and Cataract in Nepalese Women Amod K. Pokhrel*, Michael N. Bates with use of biomass cookstoves. These studies, however, have had limitations, including potential control of Nepal where biomass cookstoves are widely used without direct venting of the smoke to the outdoors

49

International Journal of Engineering & Technology IJET-IJENS Vol: 11 No: 03 7 Co-combustion of Biosolids with Wood Pellets in a  

E-Print Network (OSTI)

Abstract- Co-combustion of biosolids with coal or other biomass fuel can play a significant role in combustion facilities for energy production and waste management policy context. This paper presents the results of an experimental study to investigate the use of biosolids for cocombustion with wood pellets in a wood pellet stove. Fuel property, gas emissions and stove efficiency are compared. In regard to fuel properties, proximate analysis, ultimate analysis and heating values are determined and emissions of carbon monoxide (CO), nitrogen oxides (NOx) and sulphur dioxide (SO2) are measured and compared. Pilot scale combustion tests revealed that cocombustion of 10 % biosolids with 90% wood pellets resulted in successful combustion without any significant degradation of efficiency and emissions. Nitrogen oxides (NOx) emissions were found to be proportional with the N2 content in the fuel. Sulphur dioxide (SO2) emissions were negligible. Index Terms- Biosolids, co-combustion, wood pellet stove, performance and emissions.

Wood Pellet Stove; Murari Mohon Roy; Animesh Dutta; Kenny Corscadden; Peter Havard

2011-01-01T23:59:59.000Z

50

Residential Alternative Energy Tax Deduction | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Alternative Energy Tax Deduction Residential Alternative Energy Tax Deduction Residential Alternative Energy Tax Deduction < Back Eligibility Residential Savings Category Bioenergy Heating & Cooling Commercial Heating & Cooling Solar Heating Buying & Making Electricity Water Heating Wind Maximum Rebate 5,000 per year; 20,000 total deduction Program Info State Idaho Program Type Personal Deduction Rebate Amount 40% in the first year; 20% per year for next three years Provider Idaho Tax Commission This statute allows taxpayers an income tax deduction of 40% of the cost of a solar, wind, geothermal, and certain biomass energy devices used for heating or electricity generation. Taxpayers can apply this 40% deduction in the year in which the system is installed and can also deduct 20% of the

51

Alternative Fuels Data Center: Biofuels Production Tax Deduction  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Biofuels Production Biofuels Production Tax Deduction to someone by E-mail Share Alternative Fuels Data Center: Biofuels Production Tax Deduction on Facebook Tweet about Alternative Fuels Data Center: Biofuels Production Tax Deduction on Twitter Bookmark Alternative Fuels Data Center: Biofuels Production Tax Deduction on Google Bookmark Alternative Fuels Data Center: Biofuels Production Tax Deduction on Delicious Rank Alternative Fuels Data Center: Biofuels Production Tax Deduction on Digg Find More places to share Alternative Fuels Data Center: Biofuels Production Tax Deduction on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Biofuels Production Tax Deduction The cost of purchasing qualified biomass feedstocks to be processed into

52

Carbon Dioxide Capture/Sequestration Tax Deduction (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

Carbon Dioxide Capture/Sequestration Tax Deduction allows a taxpayer a deduction to adjusted gross income with respect to the amortization of the amortizable costs of carbon dioxide capture,...

53

Instruction Guide Retirement Plan Contributions: Paycheck Deductions  

E-Print Network (OSTI)

and the total year to date figure. The Amount consists of 5.14% that is sent to your ORP Investment Provider contribution The Before-Tax Deductions column now shows two entries: ORP EE is the regular voluntary employee to date figure. The Amount consists of 5.14% that is sent to your ORP Investment Provider and 0.5% for FRS

Watson, Craig A.

54

Pollution Control Equipment Tax Deduction (Alabama) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pollution Control Equipment Tax Deduction (Alabama) Pollution Control Equipment Tax Deduction (Alabama) Pollution Control Equipment Tax Deduction (Alabama) < Back Eligibility Commercial Construction Developer Industrial Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Alabama Program Type Corporate Tax Incentive The Pollution Control Equipment Tax Deduction allows businesses to deduct from their Alabama net worth the net amount invested in all devices, facilities, or structures, and all identifiable components or materials for use therein, that are located in Alabama and are acquired or constructed primarily for the control, reduction, or elimination of air, ground, or water pollution or radiological hazards where such pollution or

55

Particulate emissions from residential wood combustion: Final report: Norteast regional Biomass Program  

DOE Green Energy (OSTI)

The objective of this study was to provide a resource document for the Northeastern states when pursuing the analysis of localized problems resulting from residential wood combustion. Specific tasks performed include assigning emission rates for total suspended particulates (TSP) and benzo(a)pyrene (BaP) from wood burning stoves, estimating the impact on ambient air quality from residential wood combustion and elucidating the policy options available to Northeastern states in their effort to limit any detrimental effects resulting from residential wood combustion. Ancillary tasks included providing a comprehensive review on the relevant health effects, indoor air pollution and toxic air pollutant studies. 77 refs., 11 figs., 25 tabs.

Not Available

1987-01-01T23:59:59.000Z

56

Tax Deduction for Home Energy Audits and Energy Efficiency Improvements |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deduction for Home Energy Audits and Energy Efficiency Tax Deduction for Home Energy Audits and Energy Efficiency Improvements Tax Deduction for Home Energy Audits and Energy Efficiency Improvements < Back Eligibility Residential Savings Category Other Maximum Rebate $1,000 per return per year; $2,000 cumulatively per taxpayer Program Info Start Date 01/01/2009 State Missouri Program Type Personal Deduction Rebate Amount 100% of the cost of eligible improvements In July 2008, Missouri enacted legislation allowing homeowners to take an income tax deduction of the cost of home energy audits and associated energy efficiency improvements. The tax deduction is valid for expenses incurred on or after January 1, 2009. Any deduction shall be claimed for the tax year in which the qualified home energy audit was conducted or in

57

Improved stove programs need robust methods to estimate carbon offsets  

E-Print Network (OSTI)

on sustainable household energy use in Mexico. Energy forEnergy performance of wood-burning cookstoves in Michoacan, Mexico.

Johnson, Michael; Edwards, Rufus; Masera, Omar

2010-01-01T23:59:59.000Z

58

Residential Alternative Energy Tax Deduction (Idaho) | Open Energy...  

Open Energy Info (EERE)

page on Facebook icon Twitter icon Residential Alternative Energy Tax Deduction (Idaho) This is the approved revision of this page, as well as being the most recent. Jump...

59

Income Tax Deduction for Energy Efficiency Upgrades (Idaho) ...  

Open Energy Info (EERE)

Facebook icon Twitter icon Income Tax Deduction for Energy Efficiency Upgrades (Idaho) This is the approved revision of this page, as well as being the most recent. Jump...

60

Energy-Saving Equipment Deduction (Arkansas) | Open Energy Information  

Open Energy Info (EERE)

Review 2002-07-18 References DSIRE1 Summary This tax deduction is for individual homeowners who install any energy saving equipment including solar heating and cooling...

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Tax Deduction for Home Energy Audits and Energy Efficiency Improvement...  

Open Energy Info (EERE)

References DSIRE1 Summary In July 2008, Missouri enacted legislation allowing homeowners to take an income tax deduction of the cost of home energy audits and associated...

62

Income Tax Deduction for Energy Efficiency Upgrades | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1, 2002, qualify for an income tax deduction for 100% of the cost of installing new insulation or other approved energy efficiency improvements in an existing residence. Any...

63

UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Introduction into Induction and Natural Gas Stoves  

E-Print Network (OSTI)

into Induction and Natural Gas Stoves: A Triple Bottom Line Analysis for the new Student Union Building Jordan Ho of a project/report". #12;APSC 262 An Introduction Into Induction and Natural Gas Stoves A triple-bottom line, 2011 #12;Page 2 of 21 ABSTRACT This report compares the attributes of induction and natural gas stoves

64

Energy-Efficient Commercial Buildings Tax Deduction | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy-Efficient Commercial Buildings Tax Deduction Energy-Efficient Commercial Buildings Tax Deduction Energy-Efficient Commercial Buildings Tax Deduction < Back Eligibility Commercial Construction Fed. Government State Government Savings Category Heating & Cooling Commercial Heating & Cooling Heating Home Weatherization Commercial Weatherization Sealing Your Home Cooling Construction Design & Remodeling Windows, Doors, & Skylights Ventilation Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Insulation Water Heating Maximum Rebate 1.80 per square foot Program Info Start Date 1/1/2006 Program Type Corporate Deduction Rebate Amount 0.30-1.80 per square foot, depending on technology and amount of energy reduction Provider U.S. Internal Revenue Service The federal Energy Policy Act of 2005 established a tax deduction for

65

Biomass Equipment and Materials Compensating Tax Deduction | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Equipment and Materials Compensating Tax Deduction Biomass Equipment and Materials Compensating Tax Deduction Biomass Equipment and Materials Compensating Tax Deduction < Back Eligibility Commercial Industrial Savings Category Bioenergy Biofuels Alternative Fuel Vehicles Commercial Heating & Cooling Manufacturing Buying & Making Electricity Hydrogen & Fuel Cells Wind Maximum Rebate None Program Info Start Date 6/17/2005 State New Mexico Program Type Sales Tax Incentive Rebate Amount 100% of value may be deducted for purposes of calculating Compensating Tax due Provider New Mexico Taxation and Revenue Department In 2005 New Mexico adopted a policy to allow businesses to deduct the value of biomass equipment and biomass materials used for the processing of biopower, biofuels or biobased products in determining the amount of

66

BUILDING TECHNOLOGIES PROGRAM Tax Deduction Qualified Software  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deduction Qualified Software IES version 6.3 On this page you'll find information about the IES version 6.3 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 30 March 2011 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Integrated Environmental Solutions Limited Helix Building, West Of Scotland Science Park,

67

Quantifying Stove Emissions Related to Different Use Patterns for the Silver-mini  

NLE Websites -- All DOE Office Websites (Extended Search)

Quantifying Stove Emissions Related to Quantifying Stove Emissions Related to Different Use Patterns for the Silver-mini (Small Turkish) Space Heating Stove Randy Maddalena, Melissa Lunden, Daniel Wilson, Cristina Ceballos, Thomas Kirchstetter, Jonathan Slack, Larry Dale Environmental Energy Technologies Division Indoor Environment Group Lawrence Berkeley National Laboratory Berkeley, CA 94720 August 2012 This work was supported by the Millennium Challenge Corporation, USA and by the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. LBNL-6319E Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither

68

Jordan Woods  

NLE Websites -- All DOE Office Websites (Extended Search)

Jordan Woods Windows and Envelope Materials Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2052C (510) 486-4931...

69

Drew Wood  

NLE Websites -- All DOE Office Websites (Extended Search)

Wood Indoor Air Quality Research Collaborative drew@iaqrc.org This speaker was a visiting speaker who delivered a talk or talks on the date(s) shown at the links below. This...

70

Elmira Stove Works: Proposed Penalty (2011-CE-1407) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Proposed Penalty (2011-CE-1407) Proposed Penalty (2011-CE-1407) Elmira Stove Works: Proposed Penalty (2011-CE-1407) April 22, 2011 DOE alleged in a Notice of Proposed Civil Penalty that Elmira Stove Works failed to certify refrigerator-freezers as compliant with the energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Elmira Stove Works: Proposed Penalty (2011-CE-1407) More Documents & Publications Elmira Stove Works: Order (2011-CE-1407) Living Direct: Proposed Penalty (2011-CE-1904)

71

Solar Energy Gross Receipts Tax Deduction | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Gross Receipts Tax Deduction Energy Gross Receipts Tax Deduction Solar Energy Gross Receipts Tax Deduction < Back Eligibility Commercial Construction Installer/Contractor Residential Retail Supplier Savings Category Heating & Cooling Commercial Heating & Cooling Solar Heating Buying & Making Electricity Water Heating Program Info Start Date 7/1/2007 State New Mexico Program Type Sales Tax Incentive Rebate Amount 100% of gross receipts from sale and installation of solar energy systems Provider New Mexico Energy, Minerals and Natural Resources Department New Mexico has a gross receipts tax structure for businesses instead of a sales tax. Businesses are taxed on the gross amount of their business receipts each year before expenses are deducted. Revenue generated by the sale and installation of solar systems used to provide space heat, hot

72

Excise Tax Deduction for Solar- or Wind-Powered Systems  

Energy.gov (U.S. Department of Energy (DOE))

In Massachusetts, businesses may deduct from net income, for state excise tax purposes, expenditures paid or incurred from the installation of any "solar or wind powered climatic control unit and...

73

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

71 - 11480 of 31,917 results. 71 - 11480 of 31,917 results. Download Audit Report: OAS-M-06-07 Management Controls over Performance Fees in the Idaho National Laboratory Contract http://energy.gov/ig/downloads/audit-report-oas-m-06-07 Download Management Controls over Performance Fees in the Idaho National Laboratory Contract, OAS-M-06-07 http://energy.gov/ig/downloads/management-controls-over-performance-fees-idaho-national-laboratory-contract-oas-m-06-0 Rebate Qualifying Wood Stove Deduction This incentive allows Arizona taxpayers to deduct the cost of converting an existing wood fireplace to a qualifying wood stove. The cost to purchase and install all necessary equipment is tax... http://energy.gov/savings/qualifying-wood-stove-deduction Contributor Robert J. Thompson Robert J. Thompson is Chairman of the Energy Communities Alliance, a

74

Improved stove programs need robust methods to estimate carbon offsets  

E-Print Network (OSTI)

supply demand mapping tool for woodfuel management. Biomassbiomass Uncertainty based on sample size and variability in measurements Community- level estimates using C-WISDOM fuel wood supply/supply/demand imbalances at the local level: a case study for Central Mexico. Biomass

Johnson, Michael; Edwards, Rufus; Masera, Omar

2010-01-01T23:59:59.000Z

75

Deductive spreadsheets using tabled logic programming  

E-Print Network (OSTI)

Abstract. Rule-based specifications in Datalog are used in a number of application areas, such as configuration management, access control and trust management, decision making, etc. However, rules sets are typically hard to maintain; the rules often interact in subtle ways, making them difficult to understand and reason about. This has impeded the wide-spread adoption of rule-based computing. This paper describes the design and implementation of XcelLog, a deductive spreadsheet system (DSS), that permits users to specify and maintain Datalog rules using the popular and easy-to-use spreadsheet interface. The driving idea underlying the system is to treat sets as the fundamental data type and rules as specifying relationships among sets, and use the spreadsheet metaphor to create and view the materialized sets. The fundamental feature that makes XcelLog suitable even for non-programmers is that the user mainly sees the effect of the rules; when rules or basic facts change, the user sees the impact of the change immediately. This enables the user to gain confidence in the rules and their modification, and also experiment with what-if scenarios without any programming. XcelLog is implemented as an add-in to Excel with XSB serving as the rule engine for evaluating Datalog specifications. Preliminary experience with using XcelLog indicates that it is indeed feasible to combine the power of rule-based computing and the elegance and simplicity of the spreadsheet metaphor, so that end users can encode and maintain rule bases with little or no programming. 1

C. R. Ramakrishnan; I. V. Ramakrishnan; David S. Warren

2006-01-01T23:59:59.000Z

76

Residential Sector End-Use Forecasting with EPRI-REEPS 2.1: Summary Input Assumptions and Results  

E-Print Network (OSTI)

gas Oil Secondary Heating Wood Stove Secondary Cooling RoomTotal Secondary Heating Wood Stove Secondary Cooling Room ACConsumption Secondary Heating Wood Stove Secondary Cooling

Koomey, Jonathan G.

2010-01-01T23:59:59.000Z

77

Income Tax Deduction for Solar-Powered Roof Vents or Fans  

Energy.gov (U.S. Department of Energy (DOE))

Indiana allows taxpayers to take a deduction on solar-powered roof fans (or vent, also sometimes called an attic fan) installed in a home that the taxpayer owns or leases. The deduction is for 50%...

78

Efficient Cook Stoves for Darfur : Future Technologies : From the Lab to  

NLE Websites -- All DOE Office Websites (Extended Search)

Efficient Cook Stoves for Darfur Efficient Cook Stoves for Darfur From the Lab to the Marketplace Ten Years Later, Energy Efficient Technologies from Research at the Lawrence Berkeley National Laboratory Berkeley Lab logo (left) with six rows of gray dots transitioning to a line art drawing of a cityscape and residential houses. Efficient Cook Stoves for Darfur Beginning in 2003, hundreds of thousands of people have been killed, and another 2.2 million have become internal refugees in the Darfur region of Sudan. Although the refugees are relatively safe inside the refugee camps, they risk murder and rape when they leave to fetch firewood. To reduce the amount of firewood the refugees need, Berkeley Lab scientist Ashok Gadgil modified an existing cookstove design to create one that is 75% more

79

Biomass Stove Pollution Sam Beck ATOC-3500 Biomass energy accounts for about 15% of the world's primary energy consumption and  

E-Print Network (OSTI)

Biomass Stove Pollution Sam Beck ATOC-3500 Biomass energy accounts for about 15% of the world. Furthermore, biomass often accounts for more than 90% of the total rural energy supplies in developing countries. The traditional stoves in developing countries waste a lot of biomass, mainly because

Toohey, Darin W.

80

STOICHIOMETRY OF WOOD LIQUEFACTION  

E-Print Network (OSTI)

co 2 By decomposition to (2) - 0 in H cf 0 in wood TABLE VForced Balance - Wood to Char Output - 55 lbs char lbsuc -61 STOICHIOMETRY OF WOOD LIQUEFACTION Hubert G. Davis

Davis, Hubert G.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A Natural Deduction System for Intuitionistic Fuzzy Logic  

E-Print Network (OSTI)

unit interval [0, 1] as set of truth­values. We present a natural de­ duction system NIF for IF . NIF. Soundness, completeness and normal form theorems for NIF are pro­ vided. 1 Introduction Intuitionistic fuzzy Curie fellowship HPMF--CT--1999--00301 #12; In this paper we introduce a natural deduction system NIF

Ciabattoni, Agata

82

Deployment of coal briquettes and improved stoves: possibly an option for both environment and climate  

Science Conference Proceedings (OSTI)

The use of coal briquettes and improved stoves by Chinese households has been encouraged by the government as a means of reducing air pollution and health impacts. In this study we have shown that these two improvements also relate to climate change. Our experimental measurements indicate that, if all coal were burned as briquettes in improved stoves, particulate matter (PM), organic carbon (OC), and black carbon (BC) could be annually reduced by 63 {+-} 12%, 61 {+-} 10%, and 98 {+-} 1.7%, respectively. Also, the ratio of BC to OC (BC/OC) could be reduced by about 97%, from 0.49 to 0.016, which would make the primary emissions of household coal combustion more optically scattering. Therefore, it is suggested that the government consider the possibility of: (i) phasing out direct burning of bituminous raw-coal-chunks in households; (ii) phasing out simple stoves in households; and, (iii) financially supporting the research, production, and popularization of improved stoves and efficient coal briquettes. These actions may have considerable environmental benefits by reducing emissions and mitigating some of the impacts of household coal burning on the climate. International cooperation is required both technologically and financially to accelerate the emission reduction in the world. 50 refs., 3 figs., 2 tabs.

Guorui Zhi; Conghu Peng; Yingjun Chen; Dongyan Liu; Guoying Sheng; Jiamo Fu [Chinese Academy of Meteorological Sciences, Beijing (China). Key Laboratory for Atmospheric Chemistry

2009-08-15T23:59:59.000Z

83

Solar and Wind Energy Device Franchise Tax Deduction | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar and Wind Energy Device Franchise Tax Deduction Solar and Wind Energy Device Franchise Tax Deduction Solar and Wind Energy Device Franchise Tax Deduction < Back Eligibility Commercial Industrial Savings Category Solar Buying & Making Electricity Heating & Cooling Commercial Heating & Cooling Heating Water Heating Wind Maximum Rebate None Program Info Start Date 1982 State Texas Program Type Corporate Deduction Rebate Amount 10% of amortized cost Provider Comptroller of Public Accounts Texas allows a corporation or other entity subject the state franchise tax to deduct the cost of a solar energy device from the franchise tax. Entities are permitted to deduct 10% of the amortized cost of the system from their apportioned margin. The franchise tax is Texas's equivalent to a corporate tax. For the purposes of this deduction, a solar energy device means "a system

84

AIR LEAKAGE, SURFACE PRESSURES AND INFILTRATION RATES IN HOUSES  

E-Print Network (OSTI)

solar heating Sealed combustion wood stove. 174 m floorheating system; sealed combustion wood stove back-up. 197 m

Grimsrud, D.T.

2011-01-01T23:59:59.000Z

85

Report on Applicability of Residential Ventilation Standards in California  

E-Print Network (OSTI)

doors for fireplaces, wood, pellet and gas stoves. Whenfireplace and each wood, pellet or gas stove. The Minnesota

Sherman, Max H.; McWilliam, Jennifer A.

2005-01-01T23:59:59.000Z

86

Vertical feed stick wood fuel burning furnace system  

DOE Patents (OSTI)

A new and improved stove or furnace for efficient combustion of wood fuel including a vertical feed combustion chamber for receiving and supporting wood fuel in a vertical attitude or stack, a major upper portion of the combustion chamber column comprising a water jacket for coupling to a source of water or heat transfer fluid and for convection circulation of the fluid for confining the locus of wood fuel combustion to the bottom of the vertical gravity feed combustion chamber. A flue gas propagation delay channel extending from the laterally directed draft outlet affords delayed travel time in a high temperature environment to assure substantially complete combustion of the gaseous products of wood burning with forced air as an actively induced draft draws the fuel gas and air mixture laterally through the combustion and high temperature zone. Active sources of forced air and induced draft are included, multiple use and circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1984-01-01T23:59:59.000Z

87

Vertical feed stick wood fuel burning furnace system  

DOE Patents (OSTI)

A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

Hill, Richard C. (Orono, ME)

1982-01-01T23:59:59.000Z

88

Wood Use Across Time  

E-Print Network (OSTI)

?Forest products history and use ?Forest resource- the big picture ?Consumption- the big picture ?Trends forest products industry ? pulp & paper ? solid woodBack in Time ?1492 ? Columbus sailed the ocean blue! ? wood use- fuelwood American Indians ?1634: Jean Nicolet

Scott Bowe; United States Wood Use

2005-01-01T23:59:59.000Z

89

Residential Wood Residential wood combustion (RWC) is  

E-Print Network (OSTI)

Residential Wood Combustion Residential wood combustion (RWC) is increasing in Europe because PM2.5. Furthermore, other combustion- related sources of OA in Europe may need to be reassessed. Will it affect global OA emission estimates? Combustion of biofuels is globally one of the major OA sources

90

Analysis of wood-energy production and consumption strategies among small-scale farmers in central Kenya  

SciTech Connect

This study focuses on wood-energy production and consumption strategies among small-scale farm households in central Kenya. The specific objective were: (1) to determine how households had responded to specific wood-energy policies; (2) to identify factors associated with household adoption or non-adoption of the strategies. Different programs aimed at addressing wood-energy shortages in Kenya were initiated or strengthened during the 1980s: fuelwood or multipurpose tree planting; development and dissemination of improved stoves and fireplaces; promotion of increased accessibility to wood-energy substitutes. Household adoption levels for policy-supported strategies have remained low despite promotion. Survey data from two villages in Nyeri district were collected to determine the factors associated with adoption of the Kenya Ceramic Jiko, the [open quotes]Kuni Mbili[close quotes] stove/fireplace, kerosene stoves, electric cookers, and fuelwood or multipurpose tree planting. Adoption rates varied from as low as 1 percent for electricity to 43 percent for the Kenya Ceramic Jiko. Important policy variables included extension visits per year, income levels, years of formal education received by head of household, access to different fuels, area of farm-land owned, household size, and locational characteristics of the villages. Policy recommendations included: use of research results to direct policy; improvement of information flows between policy makers, extension agents, and technology-users; increased support of agroforestry; and better program coordination. Recommendations for further research included: examining more areas where efficiency gains in energy production and consumption can be made, extending the study to cover the drier parts of central Kenya, and conducting regular case studies in order to better understand the adoption process over time.

Mwangi, A.M.

1992-01-01T23:59:59.000Z

91

STEO October 2012 - wood  

U.S. Energy Information Administration (EIA) Indexed Site

More U.S. households burning wood this winter to stay warm, More U.S. households burning wood this winter to stay warm, reversing two-decade decline Burning wood as the primary heating source in U.S. households has risen over the last 10 years, reversing the decline seen in the 1980s and 1990s. About 2.6 million households out of 115 million will rely on wood as the main way to warm their homes this winter. That's up 3 percent from last year, according to the U.S. Energy Information Administration's new winter fuels forecast. The West will have the most households using wood as their primary space heating fuel, followed by the Midwest, South and Northeast regions of the United States. Wood is also the second most common backup fuel, after electricity, that households across the U.S. use as a supplemental heating source. Almost half of all rural households use wood this

92

Case study: The furniture company: deductive databases and the scheduling problem  

Science Conference Proceedings (OSTI)

In this paper we address the possibility of utilizing a deductive database solution to assist a furniture company to solve its delivery scheduling problems. We first present the company's current approach to scheduling furniture deliveries using their ... Keywords: Deductive database, Furniture, Knowledge-based systems, Scheduling

Alexander P. Pons

2003-12-01T23:59:59.000Z

93

Using the sun and waste wood to heat a central Ohio home. Final technical report  

DOE Green Energy (OSTI)

The description of a house in Ohio built on a south facing slope with two levels above ground on the north, east, and west sides and three levels exposed to the southern winter Sun is presented. The floor plan, a general history of the project, the operation of the system, the backup heat source (wood), the collection of data, and the procedure for determining actual heat loss are described. Additionally, the calculation of the solar contribution percentage and the amount of mass to be included in the greenhouse and problems with an indirect gain wall are discussed. The location of the wood stove in the system is noted. The east wall temperature data are given. Soil temperature, air infiltration, thermal comfort, and energy usage are discussed. (MCW).

Not Available

1981-01-01T23:59:59.000Z

94

Urban Wood Waste Resource Assessment  

DOE Green Energy (OSTI)

This study collected and analyzed data on urban wood waste resources in 30 randomly selected metropolitan areas in the United States. Three major categories wood wastes disposed with, or recovered from, the municipal solid waste stream; industrial wood wastes such as wood scraps and sawdust from pallet recycling, woodworking shops, and lumberyards; and wood in construction/demolition and land clearing debris.

Wiltsee, G.

1998-11-20T23:59:59.000Z

95

Wood pellet production  

Science Conference Proceedings (OSTI)

Southern Energy Limited's wood pellet refinery, Bristol, Florida, produces wood pellets for fuel from scrap wood from a nearby sawmill and other hog fuel delivered to the plant from nearby forest lands. The refinery will provide 50,000 tons of pellets per year to the Florida State Hospital at Chattahoochee to fire recently converted boilers in the central power plant. The pellets are densified wood, having a moisture content of about 10% and a heating value of 8000 Btu/lb. They are 0.5 inches in diameter and 2 to 3 inches in length.

Moore, J.W.

1983-08-01T23:59:59.000Z

96

HYDROLYZED WOOD SLURRY FLOW MODELING  

E-Print Network (OSTI)

LBL-10090 UC-61 HYDROLYZED WOOD SLURRY FLOW MODELING JimLBL-10090 HYDROLYZED WOOD SLURRY FLOW MODELING Jim Wrathallconversion of hydrolyzed wood slurry to fuel oil, Based on

Wrathall, Jim

2012-01-01T23:59:59.000Z

97

AIR LEAKAGE, SURFACE PRESSURES AND INFILTRATION RATES IN HOUSES  

E-Print Network (OSTI)

Active solar heating Sealed combustion wood stove. 174 mradiant heating system; sealed combustion wood stove back-One story wood frame construction. floor furnace heating. m

Grimsrud, D.T.

2011-01-01T23:59:59.000Z

98

Income Tax Deduction for Solar-Powered Roof Vents or Fans (Indiana...  

Open Energy Info (EERE)

1232012 References DSIRE1 Summary Indiana allows taxpayers to take a deduction on solar-powered roof fans (or vent, also sometimes called an attic fan) installed in a home...

99

Income Tax Deduction for Energy-Efficient Products | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Income Tax Deduction for Energy-Efficient Products Income Tax Deduction for Energy-Efficient Products Income Tax Deduction for Energy-Efficient Products < Back Eligibility Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Cooling Appliances & Electronics Heat Pumps Commercial Lighting Lighting Water Heating Maximum Rebate Not to exceed $500 Program Info Start Date 3/23/2007 Expiration Date 07/01/2017 State Virginia Program Type Personal Deduction Rebate Amount 20% of the sales tax paid by an individual Provider Virginia Department of Taxation This incentive is available for dishwashers, clothes washers, air conditioners, ceiling fans, compact fluorescent light bulbs, dehumidifiers, programmable thermostats or refrigerators that meet or exceed federal Energy Star standards. Purchases of fuel cells that generate electricity

100

Revenue Costs and Incentive Effects of the Mortgage Interest Deduction for Owner-Occupied Housing  

E-Print Network (OSTI)

We draw on household-level data from the 2004 Survey of Consumer Finances to analyze how changes in the income tax deduction for mortgage interest would affect the distribution of income tax liabilities and the consumption ...

Poterba, James M.

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Wood Heating Fuel Exemption  

Energy.gov (U.S. Department of Energy (DOE))

This statute exempts from the state sales tax all wood or "refuse-derived" fuel used for heating purposes. The law does not make any distinctions about whether the qualified fuels are used for...

102

Gregory H. Woods  

Energy.gov (U.S. Department of Energy (DOE))

Gregory H. Woods was sworn in as the General Counsel of the Department of Energy on April 16, 2012, following the unanimous confirmation of his appointment by the United States Senate.  Mr....

103

Long term performance of radon mitigation systems  

E-Print Network (OSTI)

wood stove in house ESP116 required adding additional combustionwood stove located on the main level. Providing additional combustion

Prill, R.; Fisk, W.J.

2002-01-01T23:59:59.000Z

104

Gregory H. Woods  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

H. Woods H. Woods Department· of Energy Fermi Site Office Post Office Box 2000 Batavia, Illinois 60510 JAN 1 1 2DD Office of the General Counsel GC-1, FORS SUBJECT: FERMI SITE OFFICE (FSO) 2013 ANNUAL NATIONAL ENVIRONMENTAL POLICY ACT (NEPA) PLANNING SUMMARY Section 5(a) (7) of Department Of Energy Order 451.1 B Change 2, NEPA Compliance Program, requires each Secretarial Officer and Head of Field Organization to submit an annual NEPA

105

Finishing Wood Decks  

E-Print Network (OSTI)

Wood decks have become an important part of residential construction in recent years. However, there is considerable confusion regarding how these structures should be protected with finish. This paper summarizes the types, application techniques, and expected service lives of various finishes on both preservative treated and untreated lumber. Recommendations are made on the basis of decades of research on various wood species using a wide variety of finishes.

R. Sam Williams; et al.

1993-01-01T23:59:59.000Z

106

Treated Wood Pole Management  

Science Conference Proceedings (OSTI)

This document characterizes similarities and differences in international wood pole and wood pole preservative management. The research team identified practices for selection, regulation, and disposition of utility poles outside the United States. Most information is based on interviews and website and published literature searches. Additional research will clarify regulatory positions in other countries and generate improved understanding, which will support strategic planning for U.S. utilities. Utili...

2008-10-29T23:59:59.000Z

107

Fuel Efficient Stoves for Darfur Camps of Internally DisplacedPersons - Report of Field Trip to North and South Darfur, Nov. 16 -Dec.17, 2005  

DOE Green Energy (OSTI)

Approximately 2.2 million internally displaced persons (''IDPs'') in Darfur are living in dense camps scattered in arid areas with low fuelwood productivity. Unsustainable harvesting of fuelwood by the IDPs has created ever increasing zones of denudation, that now (in November 2005) have reached several kilometers from the camp boundaries. Leaving the safety of the camps to fetch fuelwood from farther and farther away imposes great risk and hardship on the IDP women. Three different metal fuel efficient stove (''FES'') designs were tested in Darfur IDP camps for their suitability to substantially reduce the fuelwood needs of IDPs. The mud-and-dung ''ITDG'' stoves being promoted under the current FES program were also examined and tested. A modified design of the ITDG mud-and-dung stove, ''Avi'', was developed, built and tested. Systematic informal surveys of IDP households were undertaken in North and South Darfur to understand the household parameters related to family size, food, fuel, cooking habits, cooking pots, expenditure on fuel, and preferences related to alternative ways to spend time/money if fuel could be saved. Surveys found that a significant fraction of families are missing meals for lack of fuel (50% in South Darfur, and 90% in the North Darfur camps visited by the mission). About 60% of women in South Darfur, and about 90% of women in North Darfur camps purchase fuelwood. Selling some of the food rations to purchase fuel to cook meals was significant (40%) in South Darfur and has become common (80%) in North Darfur. The LBNL mission found that two of the metal stoves and the mud-and-dung Avi can significantly reduce fuelwood consumption using the same fuel, pot, cooking methods, and food ingredients used by Darfur IDPs. The most suitable design for Darfur conditions would be a modified ''Tara'' stove. With training of the cooks in tending the fire, this stove can save 50% fuel for the IDPs. The stove costs less than $10 (US) to produce in Darfur, and saves fuelwood worth $160 annually at local market prices. For programmatic and administrative reasons, the LBNL mission do not recommend a mud-and-dung stove, for which control of quality and dimensional accuracy is expensive and cumbersome to administer, particularly in a rapid large rollout effort. A light metal stove, on the other hand, can be rapidly produced in large numbers locally in Darfur, with good quality control exercised on the material and dimensions of the stoves right at the workshop where it is produced. LBNL mission also recommends immediate trials of 50 Tara stoves in a pilot technical rollout, 500 Tara stoves in a pilot social rollout, in parallel with a technical effort to modify the Tara design to make it better suited for Darfur camp conditions. The mission also recommends a program for manufacturing, disseminating the metal stoves, and educating the IDPs in fuel-efficient cooking practices. Monitoring of the stove quality, dissemination effort and training should be an integral part of the program, with systematic summaries planned with 10,000, 50,000 and 100,000 stoves have been disseminated. In the above pilot rollouts as well as in the final implementation, it is important to continue to pay attention to training of the cooks in tending the cooking fire in the stoves, and offer continued social reinforcement to this training (e.g., through periodic competitions to cook normal meals with the least fuelwood use.)

Galitsky, Christina; Gadgil, Ashok; Jacobs, Mark; Lee, Yoo-Mi

2006-02-01T23:59:59.000Z

108

Principle Wood Scientist  

E-Print Network (OSTI)

Wood, bark, and the wax-coated seeds from Chinese tallow tree (Sapium sebiferum (L.) Roxb. syn. Triadica sebifera (L.) Small), an invasive tree species in the southeastern United States, were subjected to extractions and degradative chemical analyses in an effort to better understand the mechanism(s) by which this tree species aggressively competes against native vegetation, and also to facilitate utilization efforts. Analysis of the wood extractives by FTIR spectroscopy showed functionalities analogous to those in hydrolyzable tannins, which appeared to be abundant in the bark; as expected, the seeds had a high wax/oil content (43.1%). Compared to other fast-growing hardwoods, the holocellulose content for the Chinese tallow tree wood was somewhat higher (83.3%). The alpha-cellulose (48.3%) and Klason lignin (20.3%) contents were found to be similar to those for most native North American hardwoods. Results suggest that Chinese tallow tree wood utilization along with commercial wood species should not present any significant processing problems related to the extractives or cell-wall chemistry. Keywords: Cellulose, Chinese tallow tree, extractives, Klason lignin, utilization.

Thomas L. Eberhardt; Usda Forest Service; Xiaobo Li; Chung Y. Hse; Usda Forest Service

2005-01-01T23:59:59.000Z

109

Precision wood particle feedstocks  

DOE Patents (OSTI)

Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

Dooley, James H; Lanning, David N

2013-07-30T23:59:59.000Z

110

The Pitfalls of Realist Analysis of Global Capitalism: A Critique of Ellen Meiksins Wood’s Empire of Capitalism: A Critique of Ellen Meiksins Wood's "Empire of Capital"  

E-Print Network (OSTI)

Boulder: Paradigm Press. Wood, Ellen Meiksins 2002, ‘Globalgroups. 13 Indeed, Wood 2003, p. 23. Wood 2003, p. 132.Ibid. Wood 2003, p. 129. Wood 2003, p. 133. Wood 2003, p.

Robinson, William I.

2007-01-01T23:59:59.000Z

111

Burls and Other Unusual Woods  

NLE Websites -- All DOE Office Websites (Extended Search)

President Roland F. Eisenbeis, Supt. of Conservation BURLS AND OTHER UNUSUAL WOODS Wood worked by the hands of skilled craftsmen puts a wealth of quiet beauty into our daily...

112

Analysis of Potential Free-Rider Eligibility for a Proposed Commercial Building Lighting Tax Deduction  

SciTech Connect

The report provides estimates of the potential volume of ''free riders'', in terms of both eligible square footage and associated available tax deductions, in a proposed commercial building lighting tax amendment to the 2003 Energy Bill. Determination of the actual tax rate for businesses and how the amendment may impact tax revenue collected by the treasury is beyond the scope of this effort. Others, such as the Treasury itself, are best equipped to make their own estimates of the eventual impact based on the total deductions available to taxable entities.

Winiarski, David W.; Richman, Eric E.; Biyani, Rahul K.

2004-09-30T23:59:59.000Z

113

The Asian Wood Pellet Markets  

E-Print Network (OSTI)

. 25 p. This study examines the three major wood pellet markets in Asia: China, Japan, and South Korea, South Korea is striving to increase its per- centage of renewable energy, which could benefit the wood pellets industry. We found that China, the largest energy consumer in Asia, has an established wood pellet

114

China: Changing Wood Products Markets  

E-Print Network (OSTI)

#12;China: Changing Wood Products Markets less is probably known about the forestry and wood products market in China than most other U.S. trading partners. In the 1980s China emerged as the world,11,12). However, U.S. wood products exports to China declined nearly 93 percent from 1988 to 1996, from $-I%3

Zhang, Daowei

115

The Wood Duck  

NLE Websites -- All DOE Office Websites (Extended Search)

Wood Duck Wood Duck Nature Bulletin No. 502-A October 13, 1973 Forest Preserve District of Cook County George W. Dunne, President Roland F. Eisenbeis, Supt. of Conservation THE WOOD DUCK Of all the fowl that swim, the Wood Duck is a most unusual bird. They perch in trees like jaybirds, and nest in tree holes like woodpeckers. The hens do not quack like the females of most ducks, and the drakes are dressed in a riot of gaudy colors. Each summer we see dozens of them -- more than any other kind of wild duck -- rear their families of ducklings on and around the streams, ponds, lakes and sloughs of Cook County's forest preserves. Words can scarcely describe the brilliance of the drake's plumage. The head, crest and back glint with iridescent greens, purples and blues. The eyes are red, the throat white, and the bill orange-red. The breast is wine-colored flecked with white, the belly is white, and the sides are buff. The woodie is about midway in size between the mallard and the blue-winged teal. The drakes weigh about a pound and a half. The hen is smaller and plainer, with a gray-brown head and body, a white throat, and a conspicuous white ring around the eye. Her voice is a shrill, squealing "whoo-eek", while the male's is a mere squeak.

116

Wood Inspection by Infrared Thermography  

E-Print Network (OSTI)

Wood is used everywhere and for everything. With times, this material presents many adulterations, witch degrade his physical properties. This work present a study of infrared thermography NDT for wood decay detection. The study is based on the difference of moisture content between sound wood and decay. In the first part, moisture content influence on response signal is determine. The second part define the limits of infrared thermography for wood decay detection. Results show that this method could be used, but with many cautions on depth and size of wood defects.

A. Wyckhuyse; X. Maldague; X. Maldague Corresponding

2002-01-01T23:59:59.000Z

117

Optimal allocation of policy limits and deductibles in a model with mixture risks and discount factors  

Science Conference Proceedings (OSTI)

By maximizing the expected utility, we study the optimal allocation of policy limits and deductibles from the viewpoint of a policyholder, where the dependence structure of losses is unknown. In Cheung (2007) [K.C. Cheung, Optimal allocation of policy ... Keywords: 49K30, 91B30, Comonotonicity, Conditional expectation, Hazard rate order, Likelihood ratio order, Loss frequency, Stochastic orders

Fengxia Hu; Rongming Wang

2010-09-01T23:59:59.000Z

118

Inside the guts of wood-eating catfishes: can they digest wood?  

E-Print Network (OSTI)

the cellulolytic system of the wood-boring marine mollusk2008), how diVerent are the wood-eating catWshes from otherendosymbionts and digest wood, or are these wood- eating

German, Donovan P.

2009-01-01T23:59:59.000Z

119

WOOD FLOORING 1. INTRODUCTION TO WARM AND WOOD FLOORING  

E-Print Network (OSTI)

This chapter describes the methodology used in EPA’s Waste Reduction Model (WARM) to estimate streamlined life-cycle greenhouse gas (GHG) emission factors for wood flooring beginning at the waste generation reference point. 1 The WARM GHG emission factors are used to compare the net emissions associated with wood flooring in the following three waste management alternatives: source reduction, combustion, and landfilling.

unknown authors

2012-01-01T23:59:59.000Z

120

WOOD PRODUCTS 1. INTRODUCTION TO WARM AND WOOD PRODUCTS  

E-Print Network (OSTI)

This chapter describes the methodology used in EPA’s Waste Reduction Model (WARM) to estimate streamlined life-cycle greenhouse gas (GHG) emission factors for wood products beginning at the point of waste generation. The WARM GHG emission factors are used to compare the net emissions associated with wood products in the following four materials management alternatives: source

unknown authors

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Energy Basics: Wood and Pellet Heating  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EERE: Energy Basics Wood and Pellet Heating Wood-burning and pellet fuel appliances use biomass or waste resources to heat homes or buildings. Types of Wood- and Pellet-Burning...

122

Energy Basics: Wood and Pellet Heating  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Heating & Cooling Systems Water Heating Wood and Pellet Heating Wood-burning and pellet fuel appliances use biomass or waste resources to heat homes or buildings. Types of Wood-...

123

CHEMISTRY AND STOICHIOMETRY OF WOOD LIQUEFACTION  

E-Print Network (OSTI)

V. , Anderson, Carry, Academic, New York. Pyrolysis of WoodT.J. Elder, E.J. Soltes, Wood and Fiber, 12(4), 1980, "Phenolic Constituents of a Wood Pyrolytic Oil." J.A. Knight,

Davis, H.G.

2012-01-01T23:59:59.000Z

124

Tax Deduction Qualified Software - EnerSim version 9.02  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deduction Qualified Software Tax Deduction Qualified Software EnerSim version 9.02 On this page you'll find information about the EnerSim version 9.02 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 16 December 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Southern Company Services 241 Ralph McGill Boulevard Atlanta, Georgia 30308 (2) The name, email address, and telephone number of the person to

125

Tax Deduction Qualified Software: EnergyPlus version 4.0.0.024  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tax Deduction Qualified Software Tax Deduction Qualified Software EnergyPlus version 4.0.0.024 On this page you'll find information about the EnergyPlus version 4.0.0.024 qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 22 October 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; U. S. Department of Energy EE-2J, Building Technologies Program 1000 Independence Avenue, SW

126

GLOBAL WOOD SUPPLY Sten Nilsson  

E-Print Network (OSTI)

· Increasing demand for wood through population and economic growth · More expensive wood · Where should America Expansion potential USA Deficit Canada Deficit #12;RUSSIA Advantages: Raw Materials Source LEAVED ­ EASTERN USA Source: http://www.cas.vanderbilt.edu/bioimages/biohires/ecoregions/h50404bottomland

127

Daniel Wood | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood Wood About Us Daniel Wood - Data Integration Specialist Daniel Wood Daniel Wood is the Data Visualization and Cartographic Specialist in the Office of Public Affairs at the Department of Energy. He develops creative and interactive ways of viewing the Energy Department's vast array of data. You can check out some of his work here. Prior to joining the Energy.gov team, Daniel worked at a large PR firm in Washington, D.C, doing web development and technical project management. Daniel is a graduate of Boston University but a true Philadelphian at heart. On his off days you are likely to find him exploring new neighborhoods on his bike or hanging out with the awesome kids over at Little Lights Urban Ministries. Most Recent The History of the Light Bulb November 22

128

Weathering and Protection of Wood  

E-Print Network (OSTI)

Introduction When wood is exposed outdoors, above ground, a complex combination of chemical, mechanical, and light energy factors contribute to what is described as weathering (38). Weathering is not to be confused with decay, which results from decay organisms (fungi) acting in the presence of excess moisture and air for an extended period of time (34). Under conditions suitable for the development of decay, wood can deteriorate rapidly and the result is far different than that observed for natural outdoor weathering, Outdoor Weathering Process In outdoor weathering of smooth wood, original surfaces become rough as grain raises and the wood checks, and the checks grow into large cracks; grain may loosen, boards cup and warp and pull away from fasteners (Figs. 1 and 2), The roughened surface changes color, gathers dirt and mildew, and may become unsightly; the wood loses its surface coherence and becomes friable, splinters, and frag ments come off. All these e

William C. Feist

1983-01-01T23:59:59.000Z

129

Wood Handbook Wood as an Engineering Material Centennial EditionCentennial Edition  

E-Print Network (OSTI)

Summarizes information on wood as an engineering material. Presents properties of wood and wood-based products of particular concern to the architect and engineer. Includes discussion of designing with wood and wood-based products along with some pertinent uses.

United States; Forest Service; Wood Handbook; Wood As An Engineering Material

2010-01-01T23:59:59.000Z

130

Managing Transmission Line Wood Structures  

Science Conference Proceedings (OSTI)

The objective of this project is to reduce capital cost by extending life expectancy of overhead transmission wood structures through inspection and assessment procedures and through aging mitigation techniques and tools.

2005-11-29T23:59:59.000Z

131

Treated Wood Planted Post Study  

Science Conference Proceedings (OSTI)

This Technical Update describes the interim results of a planted post study currently under way at the Austin Cary Memorial Forest (ACMF), operated by The University of Florida, in Gainesville. The purpose of this research is to examine the effectiveness of commercially available prevention methods to reduce preservative migration from treated wood poles, compare the migration of constituents of various wood treatments, and assess the environmental impacts and performance of untreated chestnut.

2009-11-12T23:59:59.000Z

132

Energy Savings Modeling and Inspection Guidelines for Commercial Building Federal Tax Deductions  

DOE Green Energy (OSTI)

This document provides guidance for modeling and inspecting energy-efficient property in commercial buildings for certification of the energy and power cost savings related to Section 179D of the Internal Revenue Code enacted in Section 1331 of the 2005 Energy Policy Act and noted in Internal Revenue Service Notice 2006-52. Specifically, Section 179D provides federal tax deductions for energy-efficient property related to a commercial building's envelope; interior lighting; heating, ventilating, and air conditioning; and service hot water systems.

Deru, M.

2007-02-01T23:59:59.000Z

133

Energy Savings Modeling and Inspection Guidelines for Commercial Building Federal Tax Deductions  

SciTech Connect

This document provides guidance for modeling and inspecting energy-efficient property in commercial buildings for certification of the energy and power cost savings related to Section 179D of the Internal Revenue Code enacted in Section 1331 of the 2005 Energy Policy Act and noted in Internal Revenue Service Notice 2006-52. Specifically, Section 179D provides federal tax deductions for energy-efficient property related to a commercial building's envelope; interior lighting; heating, ventilating, and air conditioning; and service hot water systems.

Deru, M.

2007-02-01T23:59:59.000Z

134

Energy Savings Modeling and Inspection Guidelines for Commercial Building Federal Tax Deductions, Second Edition  

SciTech Connect

This document provides guidance for modeling and inspecting energy-efficient property in commercial buildings for certification of the energy and power cost savings related to Section 179D of the Internal Revenue Code enacted in Section 1331 of the 2005 Energy Policy Act and noted in Internal Revenue Service Notice 2006-52. Specifically, Section 179D provides federal tax deductions for energy-efficient property related to a commercial building's envelope; interior lighting; heating, ventilating, and air conditioning; and service hot water systems.

Deru, M.

2007-05-01T23:59:59.000Z

135

Energy Savings Modeling and Inspection Guidelines for Commercial Building Federal Tax Deductions, Second Edition  

SciTech Connect

This document provides guidance for modeling and inspecting energy-efficient property in commercial buildings for certification of the energy and power cost savings related to Section 179D of the Internal Revenue Code enacted in Section 1331 of the 2005 Energy Policy Act and noted in Internal Revenue Service Notice 2006-52. Specifically, Section 179D provides federal tax deductions for energy-efficient property related to a commercial building's envelope; interior lighting; heating, ventilating, and air conditioning; and service hot water systems.

Deru, M.

2007-05-01T23:59:59.000Z

136

Table F24: Wood and Biomass Waste Consumption Estimates, 2011  

U.S. Energy Information Administration (EIA)

Table F24: Wood and Biomass Waste Consumption Estimates, 2011 State Wood Wood and Biomass Waste a Residential Commercial Industrial Electric Power ...

137

Chromoblastomycosis associated with in a carpenter handling exotic woods  

E-Print Network (OSTI)

in a carpenter handling exotic woods Nuno Menezes 1 , Pauloas saprophytes in the soil, wood and vegetation [ 3 ]. Theyare normally made of tropical wood [ 9 ]. The inoculation

2008-01-01T23:59:59.000Z

138

Physical and Chemical Characterization of Particulate and Gas phase Emissions from Biomass Burning  

E-Print Network (OSTI)

from Residential Wood Combustion, Environmental Science &of emissions from birch wood combustion in a wood stove,from residential wood combustion, Environmental science &

Hosseini, Seyedehsan

2012-01-01T23:59:59.000Z

139

Climate Change Mitigation: Climate, Health, and Equity Implications of the Visible and the Hidden  

E-Print Network (OSTI)

ceramic wood stove with an internal combustion chamber, thencombustion coal (power generation) diesel fuel (on-road) Wood (

Shonkoff, Seth Berrin

2012-01-01T23:59:59.000Z

140

Glossary - U.S. Energy Information Administration (EIA)  

U.S. Energy Information Administration (EIA)

Wood conversion to Btu: ... Wood pellets: Saw dust compressed into uniform diameter pellets to be burned in a heating stove.

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Innovation, renewable energy, and state investment: Case studies of leading clean energy funds  

E-Print Network (OSTI)

for high-efficiency wood burning heating units, while thebe successful. Simply put, wood stove heating is currently

Wiser, Ryan; Bolinger, Mark; Milford, Lewis; Porter, Kevin; Clark, Roger

2002-01-01T23:59:59.000Z

142

Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010; Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010; Level: National and Regional Data; Row: Selected NAICS Codes; Column: Energy Sources; Unit: Trillion Btu. Wood Residues and Wood-Related Pulping Liquor Wood Byproducts and NAICS or Biomass Agricultural Harvested Directly from Mill Paper-Related Code(a) Subsector and Industry Black Liquor Total(b) Waste(c) from Trees(d) Processing(e) Refuse(f) Total United States 311 Food 0 44 43 * * 1 311221 Wet Corn Milling 0 1 1 0 0 0 312 Beverage and Tobacco Products 0 1 0 0 1 0 321 Wood Products 0 218 * 13 199 6 321113 Sawmills 0 100 * 5 94 1 3212 Veneer, Plywood, and Engineered Woods 0 95 * 6 87 2 321219 Reconstituted Wood Products 0 52 0 6 46 1 3219 Other Wood Products

143

Wood-Composites Industry Benefits from ALS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Wood-Composites Industry Benefits from ALS Research Wood-Composites Industry Benefits from ALS Research Print Thursday, 25 October 2012 10:44 paris-wood composites Wood scientist...

144

Categorical Exclusion for Wood Pole  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood Pole Wood Pole Replacement at two structures (11/6 & 11/9) located along the Oracle-Tucson 115-kV Transmission Line, in Oro Valley, Pima County, Arizona. RECORD OF CATEGORICAL EXCLUSION DETERMINATION A. Proposed Action: Western plans to replace deteriorated wood poles, cross arms and X-braces at two existing H-frame structures (11/6 & 1119) located along the Oracle Tucson 115-kV Transmission Line in Pima, Arizona (Figure 1). Built in 1943, its aging components are beyond repair and require replacement. These poles performed poorly during structural tests, and we consider them unstable. This replacement project will ensure the safety of Western's workers and the public as well as reliability of the bulk electric system. Western will accomplish the work by clearing vegetation and blading a level pad at

145

Structure-Infesting Wood-Boring Beetles  

E-Print Network (OSTI)

Several kinds of beetles damage stored wood, structural timbers and other wood products. This publication explains how to detect, identify, prevent and control powderpost beetle, old house borer and others.

Jackman, John A.

2006-03-28T23:59:59.000Z

146

Field Guide: Visual Inspection of Wood Structures  

Science Conference Proceedings (OSTI)

The Field Guide: Visual Inspection of Wood Structures is a catalog of photographs illustrating various conditions and factors that commonly affect transmission line wood structures, along with their likely causes, a Maintenance Priority Rating, and suggested actions to be taken by utility personnel. Poles, cross-arms, cross-arm braces, X-braces, brackets, anchor rods, guy wires, and direct imbedded foundations are covered. Other sections include types of wood structures, the anatomy of wood ...

2013-10-28T23:59:59.000Z

147

Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2002  

U.S. Energy Information Administration (EIA) Indexed Site

6 Selected Wood and Wood-Related Products in Fuel Consumption, 2002;" 6 Selected Wood and Wood-Related Products in Fuel Consumption, 2002;" " Level: National and Regional Data; " " Row: Selected NAICS Codes; Column: Energy Sources;" " Unit: Trillion Btu." ,,"S e l e c t e d","W o o d","a n d","W o o d -","R e l a t e d","P r o d u c t s" ,,,,,"B i o m a s s" ,,,,,,"Wood Residues" ,,,,,,"and","Wood-Related" " "," ","Pulping Liquor"," "," ","Wood","Byproducts","and","RSE",," " "NAICS"," ","or","Biomass","Agricultural","Harvested Directly","from Mill","Paper-Related","Row"

148

Table N5.2. Selected Wood and Wood-Related Products in Fuel Consumption, 1998  

U.S. Energy Information Administration (EIA) Indexed Site

2. Selected Wood and Wood-Related Products in Fuel Consumption, 1998;" 2. Selected Wood and Wood-Related Products in Fuel Consumption, 1998;" " Level: National and Regional Data; " " Row: Selected NAICS Codes; Column: Energy Sources;" " Unit: Trillion Btu." ,,"S e l e c t e d","W o o d","a n d","W o o d -","R e l a t e d","P r o d u c t s" ,,,,,"B i o m a s s" ,,,,,,"Wood Residues" ,,,,,,"and","Wood-Related" " "," ","Pulping Liquor"," "," ","Wood","Byproducts","and","RSE",," " "NAICS"," ","or","Biomass","Agricultural","Harvested Directly","from Mill","Paper-Related","Row"

149

Autonomous Underwater Gliders Wood, Stephen  

E-Print Network (OSTI)

26 Autonomous Underwater Gliders Wood, Stephen Florida Institute of Technology United States underwater vehicles to perform ocean surveys. With these vehicles it is now possible for the scientist substances in the ocean such as chemicals from an underwater vent or toxic algae such as red tide

Wood, Stephen L.

150

James F. Wood | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

James F. Wood James F. Wood About Us James F. Wood - Deputy Assistant Secretary for Clean Coal Photo of James Wood Photo of James Wood James F. Wood is currently Deputy Assistant Secretary for Clean Coal in the Office of Fossil Energy (FE). In this position, he is responsible for the management and direction of the Office's clean coal research and development programs. Chief among these is the Carbon Sequestration program, the Clean Coal Power Initiative, and FE's $3.4 billion portfolio of Recovery Act projects. Wood has over 30 years of experience in the power industry. Most recently, he was president and CEO of Babcock Power Inc. (BPI), one of the major US-based designer/manufacturers of environmental, pressure part, heat exchanger, combustion equipment and after-market

151

Managing Transmission Line Wood Structures  

Science Conference Proceedings (OSTI)

Transmission and distribution infrastructures throughout the world are aging. As such, inspection, assessment, and maintenance of existing facilities have become increasingly important topics. This valuable reference provides an in-depth look at all facets of an inspection, assessment, and maintenance program for transmission line wood structures to help utilities develop and refine individual maintenance programs. The report is part of a broader multi-year effort by EPRI to develop a comprehensive handb...

2006-09-28T23:59:59.000Z

152

Distribution Library--Wood Poles  

Science Conference Proceedings (OSTI)

EPRI has sponsored research and published information on a wide variety of topics related to wood poles for overhead lines. Many of these resources, particularly older publications, are difficult for EPRI members to find and use. To help ensure retention of this valuable knowledge base, EPRI sponsored the project reported herein to capture this information and make it accessible in an easy-to-use electronic media (E-Media) repository.

2005-12-22T23:59:59.000Z

153

Wood Poles Population with Testing  

Science Conference Proceedings (OSTI)

EPRI's asset management research focuses on developing a rational basis for selecting repair or replacement options for specific classes of equipment by balancing the risks of equipment failure against the costs of continued maintenance or capital replacement. This Model User Guide is a companion to Guidelines for Intelligent Asset Replacement: Volume 4Wood Poles (Expanded Edition), EPRI, Palo Alto, CA: 2006. 1012500, the fourth report on guidelines for asset replacement, which discusses methods for maki...

2006-12-18T23:59:59.000Z

154

EIA Energy Kids - Wood - Energy Information Administration  

U.S. Energy Information Administration (EIA)

1860: Wood was the primary fuel for heating and cooking in homes and businesses, and was used for steam in industries, trains, and boats.

155

The Bending of Wood With Steam.  

E-Print Network (OSTI)

??Based on experimentation with the steam bending of wood to curved shapes, this thesis describes my involvement with three basic aspects of the process. First… (more)

Cottey Jr., James H.

2008-01-01T23:59:59.000Z

156

Successful biomass (wood pellets ) implementation in  

E-Print Network (OSTI)

Successful biomass (wood pellets ) implementation in Estonia Biomass Utilisation of Local in Estonia in 1995 - 2002 Regional Energy Centres in Estonia http://www.managenergy.net/conference/biomass

157

Life Cycle Assessment of Wood Pellet.  

E-Print Network (OSTI)

??The primary purpose of this project is to assess the environmental impacts associated with the wood pellet production. The study has extended to the entire… (more)

Chen, Siyu

2009-01-01T23:59:59.000Z

158

Methanol production from eucalyptus wood chips  

DOE Green Energy (OSTI)

The technical feasibility of producing methanol from wood is demonstrated and sufficient cost data is provided to allow an assessment of the economic viability.

Fishkind, H.H.

1982-06-01T23:59:59.000Z

159

Wood, Wisconsin: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wood, Wisconsin: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 43.568752, -90.330887 Loading map... "minzoom":false,"mappingservice":"googlem...

160

Emerging Technologies in Wood Energy Wood can already be used to produce heat and  

E-Print Network (OSTI)

for extension of wood pellet production is lack of appropriate technology in Slovakia. Several typesOverview 1 Development of Wood Chips and Pellets market in Slovakia Jozef Viglasky, SK systems. · Co-combustion of wood residues in existing coal fired power systems. #12;Overview 3

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Mathematical simulation of temperature profiles within microwave heated wood made for wood-based nanocomposites  

Science Conference Proceedings (OSTI)

High intensive microwave pretreatment is a new method to modify wood for the fabrication of wood-based nanocomposites. Based on the physical law on heat transfer, a mathematical model to describe the temperature profiles within wood heated by high intensive ...

Xianjun Li, Yongfeng Luo, Hongbin Chen, Xia He, Jianxiong Lv, Yiqiang Wu

2013-01-01T23:59:59.000Z

162

Clean energy funds: An overview of state support for renewable energy  

E-Print Network (OSTI)

solar space heating, and clean wood stoves - applicationsloans (11 advanced wood heating systems, 2 geothermal heatburning, or heating of waste wood, tires, garbage, general

Bolinger, Mark; Wiser, Ryan; Milford, Lew; Stoddard, Michael; Porter, Kevin

2001-01-01T23:59:59.000Z

163

Textile Drying Via Wood Gasification  

E-Print Network (OSTI)

This project was carried out to investigate the possibility of using wood gas as a direct replacement for natural gas in textile drying. The Georgia Tech updraft gasifier was used for the experimental program. During preliminary tests, the 1 million Btu/hr pilot plant produced clean burning gas which appeared viable for drying textiles. The gasifier was coupled to a modified textile drying oven and a series of tests were carried out to assess product degradation of white, colored, and chemically treated fabrics.

McGowan, T. F.; Jape, A. D.

1983-01-01T23:59:59.000Z

164

Treatment of Wood Preserving Wastewater  

E-Print Network (OSTI)

The wastewater produced by the wood preserving industry presents a difficult problem to treat economically. A review of the literature indicates the size of the industry has limited the pursuit of an orderly and economic solution. Atmospheric evaporation was one possible means of treatment which had not been studied to any great degree. Two bench scale evaporation units were employed to determine the fundamental relationships affecting wastewater quality during such treatment. In batch evaporation tests, it was repeatedly demonstrated that a constant rate of total organic carbon and chemical oxygen demand removal occurred as the wastewater was evaporated. A procedure for designing atmospheric evaporation ponds was developed and applied to a hypothetical wood preserving plant. From this example design estimates of equivalent hydrocarbon concentrations in the air downwind of the pond are made. Various other design considerations such as the input data, modifications to the design procedure, solids accumulation, and miscellaneous design aspects are discussed. A treatment scheme incorporating atmospheric evaporation ponds after chemical coagulation and settling is proposed.

Reynolds, T. D.; Shack, P. A.

1976-10-01T23:59:59.000Z

165

Management Practices for Used Treated Wood  

Science Conference Proceedings (OSTI)

Pentachlorophenol, creosote, and other chemicals are used to preserve poles, crossarms, and railroad ties for the electric, telecommunications, and railroad industries. Each year, millions of pieces of treated wood are retired. This report provides information on current and potential options for management of used treated wood.

1995-08-02T23:59:59.000Z

166

Modeling and Rendering Physically-Based Wood Combustion  

Science Conference Proceedings (OSTI)

This paper describes extensions to existing methods for rendering of the effects of combustion on a wood object, adding considerations for wood grain and moisture content.

Riensche, Roderick M.; Lewis, Robert R.

2009-08-01T23:59:59.000Z

167

Compound and Elemental Analysis At Little Valley Area (Wood,...  

Open Energy Info (EERE)

Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Little Valley Area (Wood, 2002) Exploration...

168

Wood3 Resources | Open Energy Information  

Open Energy Info (EERE)

Wood3 Resources Wood3 Resources Jump to: navigation, search Name Wood3 Resources Place Houston, Texas Zip 77056-2409 Product Wood3 Resources is an energy project development firm run by former Federal Energy Regulatory Commission Chairman Pat Wood. Coordinates 29.76045°, -95.369784° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":29.76045,"lon":-95.369784,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

169

Wood Energy Production Credit | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood Energy Production Credit Wood Energy Production Credit Wood Energy Production Credit < Back Eligibility Commercial Industrial Savings Category Bioenergy Maximum Rebate Credit may be claimed for a period of five years Program Info Start Date 12/30/1998 (most recent revision) State Missouri Program Type Corporate Tax Credit Rebate Amount $5 per ton of processed materials Provider Missouri Department of Natural Resources Note: No new credits are being issued, effective July 1, 2013. This entry is for informational purposes only. The Wood Energy Tax Credit, as effective January 1, 1997, allows individuals or businesses processing Missouri forestry industry residues into fuels an income tax credit of $5.00 per ton of processed material (e.g., wood pellets). A multiplier of 4 applies to charcoal, based on the

170

Alaska Wood Biomass Energy Project Final Report  

SciTech Connect

The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

Jonathan Bolling

2009-03-02T23:59:59.000Z

171

Mutiny on the Bounty or Bountiful Mutants? Diversity and Composition of Wood-Decaying Macrofungi on Hibiscus Tiliaceus Wood in French Polynesia  

E-Print Network (OSTI)

B. G. Jonsson. 1995. Wood-inhabiting fungi and substratumand S. C. Watkinson. 1995. Wood decomposition, higher fungi,combative interaction between wood-decaying basidiomycetes.

Wheaton, Felicia

2006-01-01T23:59:59.000Z

172

Solvolytic liquefaction of wood under mild conditions  

DOE Green Energy (OSTI)

Conversion of wood to liquid products requires cleavage of bonds which crosslink the wood structure. This study examines a low-severity wood solubilization process utilizing a solvent medium consisting of a small amount of sulfuric acid and a potentially wood-derivable alcohol. In one half hour of reaction time at 250/sup 0/C under 15 psia starting nitrogen pressure, over 95% of the wood (maf) was rendered acetone-soluble. The product is a soft, black, bitumen-like solid at room temperature but readily softens at 140/sup 0/C. Between 25 and 50% of the original wood oxygen, depending on alcohol used, was removed as water. Approximately 2 to 17% of the alcohols were retained in the product. Gel permeation chromatography showed that the product's median molecular weight is around 300. Based on experimental and literature results, a mechanism for wood solubilization is proposed. This involves protonation of the etheric oxygen atoms, leading to subsequent bond scission to form carbonium ions which are stabilized by solvent alkoxylation. At severe conditions, polymerization and condensation reactions result in acetone-insoluble materials.

Yu, S.M.

1982-04-01T23:59:59.000Z

173

Supporting rural wood industry through timber utilization research. Research paper  

SciTech Connect

The report evaluates the potential impact of USDA Forest Service wood utilization and wood energy research on rural employment and income. Recent projections suggest employment will decrease in many forest products industries, such as softwood sawmilling, but will eventually increase in softwood plywood and reconstituated panel mills. Forest products industries expected to provide wages exceeding the average manufacturing production wage include logging, softwood sawmills, millwork, softwood plywood--veneer, structural wood members, particle-board, wood partitions, pulp mills, paper mills, and paperboard mills. Industries expected to pay 90 percent of the average manufacturing production wage include wood kitchen cabinets, mobile homes, prefabricated wood buildings, and wood preservatives.

Skog, K.

1991-10-01T23:59:59.000Z

174

Inside the guts of wood-eating catfishes: can they digest wood?  

E-Print Network (OSTI)

T (2009) Non-native suckermouth armored catWshes in Florida:Loricariidae), wood-eating armored catWshes from Tropical

German, Donovan P.

2009-01-01T23:59:59.000Z

175

Biomass Energy - Focus on Wood Waste  

NLE Websites -- All DOE Office Websites (Extended Search)

application for wood waste as a fuel is in the co-firing of conventional coal-fired boilers, which means using biomass as a supplementary energy source in high- efficiency...

176

Arbuthnott Wood Pellets Ltd | Open Energy Information  

Open Energy Info (EERE)

Arbuthnott Wood Pellets Ltd Arbuthnott Wood Pellets Ltd Jump to: navigation, search Name Arbuthnott Wood Pellets Ltd Place Kincardineshire, Scotland, United Kingdom Zip AB30 1PA Product Wood pellet producer. Coordinates 56.932781°, -2.42531° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.932781,"lon":-2.42531,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

177

Wood Burning Combined Cycle Power Plant  

E-Print Network (OSTI)

A combined cycle power plant utilizing wood waste products as a fuel has been designed. This plant will yield a 50% efficiency improvement compared to conventional wood-fueled steam power plants. The power plant features an externally-fired gas turbine combined cycle system that obtains its heat input from a high temperature, high pressure ceramic air heater burning wood waste products as a fuel. This paper presents the results of the design study including the cycle evaluation and a description of the major components of the power plant. The cycle configuration is based on maximum fuel efficiency with minimum capital equipment risk. The cycle discussion includes design point performance of the power plant. The design represents a significant step forward in wood-fueled power plants.

Culley, J. W.; Bourgeois, H. S.

1984-01-01T23:59:59.000Z

178

The Texarkana Wood Preserving Company Superfund site  

E-Print Network (OSTI)

is a former wood-treating site located in Texas that treated various wood products with chemical preservatives. These activities left behind contaminated soil and sludge, that led to contaminated groundwater. In 1990 Environmental Protection Agency (EPA) selected incineration as the means to clean up contaminated soil at this site. In 1994 Congressman Jim Chapman (D-Texas) asked the Office of Technology Assessment (OTA) to review alternative technologies that might be used instead of incineration at the Texarkana site. A second, separate study to assess the safety of incineration was also requested by Representative Chapman. This report reviews technologies available for hazardous waste cleanup at wood-treating sites throughout the United States. OTA found that there are many Superfund wood-treatment sites located in this country that are very similar in terms of the contaminants

Roger C. Herdman; Frank Avvisato

1995-01-01T23:59:59.000Z

179

Chemistry and stoichiometry of wood liquefaction  

DOE Green Energy (OSTI)

The approximate stoichiometry of liquefaction, from data of two PDU runs and a laboratory run is Wood (100 g) + CO (0.1 - 0.4 Mol) ..-->.. CO/sub 2/ (0.5 - 1.0 Mol) + H/sub 2/O (0.4 - 0.8 Mol) + Product (55 - 64 g). Product includes wood oil, water soluble organics and residues. Water is formed by decomposition, carbon dioxide by decomposition and reduction of wood oxygen by CO. Aqueous products include many carboxylic acids plus a roughly equal percentage of non-acids. The wood oil is divided into a neutral fraction and three phenolic fractions of varying molecular weight. Some specific compounds found in water and oil phases are listed.

Davis, H.G.; Kloden, D.J.; Schaleger, L.L.

1981-06-01T23:59:59.000Z

180

Short rotation Wood Crops Program  

DOE Green Energy (OSTI)

This report synthesizes the technical progress of research projects in the Short Rotation Woody Crops Program for the year ending September 30, 1989. The primary goal of this research program, sponsored by the US Department of Energy's Biofuels and Municipal Waste Technology Division, is the development of a viable technology for producing renewable feedstocks for conversion to biofuels. One of the more significant accomplishments was the documentation that short-rotation woody crops total delivered costs could be $40/Mg or less under optimistic but attainable conditions. By taking advantage of federal subsidies such as those offered under the Conservation Reserve Program, wood energy feedstock costs could be lower. Genetic improvement studies are broadening species performance within geographic regions and under less-than-optimum site conditions. Advances in physiological research are identifying key characteristics of species productivity and response to nutrient applications. Recent developments utilizing biotechnology have achieved success in cell and tissue culture, somaclonal variation, and gene-insertion studies. Productivity gains have been realized with advanced cultural studies of spacing, coppice, and mixed-species trials. 8 figs., 20 tabs.

Wright, L.L.; Ehrenshaft, A.R.

1990-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing  

E-Print Network (OSTI)

explosion pretreatment of wood: effect of chip size, acid,In: Soltes, E.J. (Ed. ), Wood and Agriculture Residues –D. , Wegener, G. , 1984. Wood: Chemistry, Ultrastructure,

Tam, Jerry

2013-01-01T23:59:59.000Z

182

PATTERNS OF DIFFUSIBILITY OF LIGNIN AND CARBOHYDRATE DEGRADING SYSTEMS IN WOOD-ROTTING FUNGI  

E-Print Network (OSTI)

selected Delignification of wood chips by mutant white-rotTemperature relations of wood-destroying fungi. Kaneshiro.phenoloxidases of selected wood-decaying basidiomycetes. J,

Rosenberg, S. L.

2011-01-01T23:59:59.000Z

183

An assessment of management practices of wood and wood-related wastes in the urban environment  

DOE Green Energy (OSTI)

The US Environmental Protection Agency estimates that yard waste{sup 1} accounts for approximately 16% of the municipal solid waste (MSW) stream (US EPA, 1994). Until recently, specific data and related information on this component of the (MSW) stream has been limited. The purposes of this study, phase two of the three-phase assessment of urban wood waste issues, are to assess and describe current alternatives to landfills for urban wood waste management; provide guidance on the management of urban wood waste to organizations that produce or manage wood waste; and clarify state regulatory and policy positions affecting these organizations. For this study, urban wood waste is defined as solid waste generated by tree and landscape maintenance services (public and private). Urban wood waste includes the following materials: unchipped mixed wood, unchipped logs, and unchipped tops and brush; clearing and grubbing waste; fall leaves and grass clippings; and chips and whole stumps. Construction and demolition debris and consumer-generated yard waste are not included in this study. Generators of urban wood waste include various organizations; municipal, county, and commercial tree care divisions; nurseries, orchards, and golf courses; municipal park and recreation departments; and electric and telephone utility power line maintenance, excavator and land clearance, and landscape organizations. (1) US EPA defines yard waste as ''yard trimmings'' which includes ''grass, leaves and tree brush trimmings from residential, institutional, and commercial sources.''

NONE

1996-02-01T23:59:59.000Z

184

Use of Wood Energy in the United States –  

E-Print Network (OSTI)

The use of wood for energy – including the burning of solid wood and black liquor from pulping – has been growing at a rate significantly greater than that for all other uses such as lumber, pulp, or particleboard. in the United States, the end of most wood is not lumber or pulp and paper but feed for energy. In 1983, 155. 5 M Mg of wood were used for energy. This could threaten to increase the price of wood for those other uses, or it can stimulate us to seek more creative ways of using untapped wood resources for fuel. on the basis of estimates of heavy wood energy use relative to other uses for wood, and estimates of continuing high costs for fossil fuels, we suggest here the feasibility of meeting the demand for fuelwood through small-scale cooperatives. Such an approach can improve forestry practices and can avoid unduly increasing the cost of wood for other end uses.

John W. Koning; Kenneth E. Skog

1986-01-01T23:59:59.000Z

185

Dry Kraft Pulping at Ambient Pressure for Cost Effective Energy Saving and Pollution Deduction  

DOE Green Energy (OSTI)

Sponsored by the DOE Industrial Energy Efficiency Grand Challenge program, our research team at the Georgia Institute of Technology conducted laboratory studies and confirmed the concept of making wood pulp using a dry pulping technology. This technology is a new process different from any prior pulping technology used in Kraft and CTMP pulping. Three different kinds of dry pulping methods were investigated. (a) Dry Pulping at Atmospheric Pressure: The first one is to dry and bake the pretreated woodchips in a conventional oven at atmospheric pressure without the use of a catalyst. (b) Dry Pulping at Reduced Pressure: The second method is to dry the pretreated woodchips first in a vacuum oven in the presence of anthraquinone (AQ) as a pulping catalyst, followed by baking at elevated temperature. (c) Liquid Free Chemical Pulping, LFCP. The third method is to first remove the free water of pretreated woodchips, followed by dry pulping using a conventional Kraft pulping digester with AQ and triton as additives. Method one: Experimental results indicated that Dry Pulping at Atmospheric Pressure could produce pulp with higher brightness and lower bulk than conventional Kraft pulp. However, tensile strength of the acquired pulp is much lower than traditional Kraft pulp, and their Kappa number and energy consumption are higher than conventional Kraft pulp. By fully analyzing the results, we concluded that wood fibers might be damaged during the drying process at elevated temperature. The main reason for wood fiber damage is that a long drying time was used during evaporation of water from the woodchips. This resulted in an un-uniform reaction condition on the woodchips: the outside layer of the woodchips was over reacted while inside the woodchips did not reacted at all. To solve this problem, dry pulping at reduced pressure was investigated. Method two: To achieve uniform reaction throughout the entire reaction system, the water inside the pretreated woodchips was evaporated first under vacuum condition at low temperature. Then, the dry woodchips were baked at high temperature (120-130 C) at atmospheric pressure. The qualities of the pulp made with this method were improved compared to that made with method one. The pulp shows higher brightness and lower bulk than Kraft pulping. The tensile strength is significantly higher than the pulp made from the first method. Although the pulp is stronger than that of TMP pulp, it is still lower than conventional Kraft fiber. Method Three: The third dry method was done in a Kraft pulping digester at elevated pressure but without free liquid in the digester. With this method, pulp that has almost the same qualities as conventional Kraft pulp could be produced. The screen yield, Kappa number, fiber brightness, pulp strength and pulp bulk are almost identical to the conventional Kraft pulp. The key advantages of this dry pulping method include ca. 55 % of cooking energy saved during the pulping process, as high as 50 wt% of NaOH saving as well as 3 wt% of Na2S saving comparing to Kraft one. By analyzing fiber properties, yields, chemical and energy consumptions, we concluded that the dry pulping method based on Liquid Free Chemical Pulping, LFCP, could be very attractive for the pulp and paper industry. More fundamental studies and scale up trials are needed to fully commercialize the technology. We expect to conduct pilot trials between 12 to 24 months of period if the DOE or industry can provide continual research funding. Based on the technology we demonstrated in this report, several pilot trial facilities in the United States will be available after small modifications. For example, the Herty Foundation in Savannah, Georgia is one of these potential locations. DOE funding for continuous study and final lead to commercialization of the technique is important.

Yulin Deng; Art Ragauskas

2012-08-28T23:59:59.000Z

186

Wood Fuel LP | Open Energy Information  

Open Energy Info (EERE)

Fuel LP Fuel LP Jump to: navigation, search Logo: Wood Fuel LP Name Wood Fuel LP Address 5900 Haynesworth Lane Place Houston, Texas Zip 77034 Sector Biomass Product Wood by-products consulting and marketing Website http://www.woodfuel.com/ Coordinates 29.6221328°, -95.1872605° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":29.6221328,"lon":-95.1872605,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

187

Wood and Derived Fuels | OpenEI  

Open Energy Info (EERE)

1 1 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142288361 Varnish cache server Wood and Derived Fuels Dataset Summary Description Annual commodity balances (supply, consumption) for renewables and waste in the UK from 1998 to 2009. Published as part of the Digest of UK energy statistics (DUKES), by the UK Department of Energy & Climate Change (DECC). Waste includes: wood waste, farm waste, sewage gas, landfill gas, waste and tyres. Renewables includes: wood, plant-based biomass, geothermal and active solar heat, hydro, wind, wave and tidal, and liquid biofuels. Source UK Department of Energy and Climate Change (DECC) Date Released July 29th, 2010 (4 years ago)

188

OpenEI - Wood and Derived Fuels  

Open Energy Info (EERE)

UK Energy Statistics: UK Energy Statistics: Renewables and Waste, Commodity Balances (2010) http://en.openei.org/datasets/node/82 Annual commodity balances (supply, consumption) for renewables and waste in the UK from 1998 to 2009. Published as part of the Digest of UK energy statistics (DUKES), by the UK Department of Energy & Climate Change (DECC). Waste includes: wood waste, farm waste, sewage gas, landfill gas, waste and tyres. Renewables includes: wood, plant-based biomass, geothermal and active solar heat, hydro, wind, wave and tidal, and liquid biofuels.

License
Type of

189

International Trade of Wood Pellets (Brochure)  

DOE Green Energy (OSTI)

The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

Not Available

2013-05-01T23:59:59.000Z

190

A study of the molecular mechanics of wood cell walls  

E-Print Network (OSTI)

Wood is the original structural material, developed by nature to support tall plants. Every advantageous feature of wood as used in artificial structures is rooted in the plant's evolved capability to withstand the conditions ...

Adler, David, S.M. (David C.). Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

191

The potential of wood residue streams for industrial wood pellet production in the Baltic Countries and Poland.  

E-Print Network (OSTI)

??Currently most solid biomass in the European Union (EU-27) is made from high grade secondary wood residues, e.g. clean saw dust and wood chips. The… (more)

Jong, B. de

2012-01-01T23:59:59.000Z

192

Wood Fuel Future: The Potential Web Text December 2010  

E-Print Network (OSTI)

and power, the wood products industry and major independent power producers also have significant production of heat and power. Table 3.1 Canadian Wood Residue Heat & Power Generation - 2003 13 Forest Products SAWMILLS LTD LACRETE 50,000 TONNE WOOD PELLET PRODUCTION IN WESTERN CANADA 2004 / 2005 PINNACLE PEL LET INC

193

U.S. Department of Energy NEPA Categorical Exclusion Determination...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

or Project Description: Program to educate the public about the health effects of wood smoke and to encourage replacement of wood stoves Conditions: None Categorical...

194

The ambient wood journals: replaying the experience  

Science Conference Proceedings (OSTI)

The Ambient Wood project aims to facilitate a learning experience using an adaptive infrastructure in an outdoor environment. This involves sensor technology, virtual world orchestration, and a wide range of devices ranging from hand-held computers to ... Keywords: adaptive infrastructure, consolidation, record and replay, storytelling

Mark J. Weal; Danius T. Michaelides; Mark K. Thompson; David C. DeRoure

2003-08-01T23:59:59.000Z

195

Energie-Cits 2001 BIOMASS-WOOD  

E-Print Network (OSTI)

Energie-Cités 2001 BIOMASS-WOOD Power plant LIENZ Austria By the year 2010, 12% of the gross inland this goal, intensified use needs to be made of biomass, both for heating purposes and for power generation to this rule. Thus, for instance, the town of Lienz started up the largest biomass facility of Austria

196

Energie-Cits 2001 BIOMASS -WOOD  

E-Print Network (OSTI)

Energie-Cités 2001 BIOMASS - WOOD Gasification / Cogeneration ARMAGH United Kingdom Gasification is transferring the combustible matters in organic waste or biomass into gas and pure char by burning the fuel via it allows biomass in small-scaled engines and co-generation units ­ which with conventional technologies

197

Successful biomass (wood pellets ) implementation in  

E-Print Network (OSTI)

Regional Energy centres in Estonia This presentation will cover Regional Energy Centres in Estonia ! Supply Regional Energy Centres in Estonia Supply of primary energy in Estonia Regional Energy Centres in Estonia of primary energy in Estonia ! Wood fuels production ! Pellet firing projects in Estonia ­ SIDA Demo East

198

Wood combustion systems: status of environmental concerns  

DOE Green Energy (OSTI)

This document addresses the uncertainties about environmental aspects of Wood Combustion Systems that remain to be resolved through research and development. The resolution of these uncertainties may require adjustments in the technology program before it can be commercialized. The impacts and concerns presented in the document are treated generically without reference to specific predetermined sites unless these are known. Hence, site-specific implications are not generally included in the assessment. The report consists of two main sections which describe the energy resource base involved, characteristics of the technology, and introduce the environmental concerns of implementing the technology; and which review the concerns related to wood combustion systems which are of significance for the environment. It also examines the likelihood and consequence of findings which might impede wood commercialization such as problems and uncertainties stemming from current or anticipated environmental regulation, or costs of potential environmental controls. This document is not a formal NEPA document. Appropriate NEPA documentation will be prepared after a formal wood combustion commercialization program is approved by DOE.

Dunwoody, J.E.; Takach, H.; Kelley, C.S.; Opalanko, R.; High, C.; Fege, A.

1980-01-01T23:59:59.000Z

199

Fast Curing of Composite Wood Products  

SciTech Connect

The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: • Identifying the rate limiting UF and PF curing reactions for current market resins; • Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An alternative approach to accelerated PF curing can be accomplished with the addition amines or amides. The later functionality undergoes base catalyzed hydrolysis yielding the corresponding carboxyl ate and free amine which rapidly reacts with the phenolic methylol groups facilitating polymerization and curing of the PF resin (Pizzi, 1997).

Dr. Arthur J. Ragauskas

2006-04-26T23:59:59.000Z

200

Effect of species and wood to bark ratio on pelleting of southern woods  

Science Conference Proceedings (OSTI)

Six common southern hardwoods and loblolly pine were pelleted in a laboratory pellet mill. The pellet furnishes were blended to test the effect of different wood to bark ratios on pellet durability and production rate. Included was a ratio chosen to simulate the wood to bark ratio found in whole-tree chips. This furnish produced good quality pellets for all species tested. Pelleting of the pure wood of hardwoods was not successful; furnish routinely blocked the pellet mill dies. Pure pine wood, however, did produce acceptable pellets. It was noted that, as lignin and extractive content increased above a threshold level, the precentage of fines produced in a pellet durability test increased. Thus, all pine and tupelo wood/bark mixes produces high fines. This reduces the desirability of the pellets in the marketplace. Further research is necessary to confirm this relationship. This study suggests that both tree species and wood/bark ratio affect the durability of pellets and the rate with which they can be produced in a laboratory pellet mill. 9 references.

Bradfield, J.; Levi, M.P.

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Near-term potential of wood as a fuel  

DOE Green Energy (OSTI)

A summary of near-term conversion technologies, which could be used to expand utilization of wood residues and standing forests, is presented. The forest products industry is identified as a principal candidate for expanded wood-fuel use. Sources of wood-fuel are identified and conversion technologies and costs are discussed. Possible near-term incentives to encourage the use of wood as a fuel are examined. These incentives include a retirement tax credit and an investment tax credit. Suppliers of commercial wood conversion systems are identified.

Salo, D.; Gsellman, L.; Medville, D.; Price, G.

1978-08-01T23:59:59.000Z

202

Furniture wood wastes: Experimental property characterisation and burning tests  

Science Conference Proceedings (OSTI)

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected 'raw' and primarily 'engineered' ('composite') wood wastes. The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in 'engineered' wood wastes as compared with 'raw' wood wastes; and relatively high energy content values of 'engineered' wood wastes (ranging on the whole from 3675 to 5105 kcal kg{sup -1} for HHV, and from 3304 to 4634 kcal kg{sup -1} for LHV). The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in 'engineered' wood burning tests of pyrroles and amines, as well as the additional presence (as compared with 'raw' wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon. Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in 'engineered' wood burning tests as compared with 'raw' wood burning test; and considerable generation of the respirable PM{sub 1} fraction during incomplete industrial wood burning.

Tatano, Fabio [Faculty of Sciences and Technologies, University of Urbino 'Carlo Bo', Campus Scientifico - Sogesta, 61029 Urbino (Italy)], E-mail: fabio.tatano@uniurb.it; Barbadoro, Luca; Mangani, Giovanna; Pretelli, Silvia; Tombari, Lucia; Mangani, Filippo [Faculty of Sciences and Technologies, University of Urbino 'Carlo Bo', Campus Scientifico - Sogesta, 61029 Urbino (Italy)

2009-10-15T23:59:59.000Z

203

Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics  

DOE Green Energy (OSTI)

This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of fine particulate per unit of energy, expressed as milligrams per Mega-Joule (mg/MJ) versus the different sulfur contents of four different heating fuels. These were tested in a conventional cast iron boiler equipped with a flame retention head burner. The fuels included a typical ASTM No. 2 fuel oil with sulfur below 0.5 percent (1520 average ppm S), an ASTM No. 2 fuel oil with very high sulfur content (5780 ppm S), low sulfur heating oil (322 ppm S) and an ultra low sulfur diesel fuel (11 ppm S). Three additional oil-fired heating system types were also tested with normal heating fuel, low sulfur and ultralow sulfur fuel. They included an oil-fired warm air furnace of conventional design, a high efficiency condensing warm air furnace, a condensing hydronic boiler and the conventional hydronic boiler as discussed above. The linearity in the results was observed with all of the different oil-fired equipment types (as shown in the second figure on the next page). A linear regression of the data resulted in an Rsquared value of 0.99 indicating that a very good linear relationship exits. This means that as sulfur decreases the PM 2.5 emissions are reduced in a linear manner within the sulfur content range tested. At the ultra low sulfur level (15 ppm S) the amount of PM 2.5 had been reduced dramatically to an average of 0.043 mg/MJ. Three different gas-fired heating systems were tested. These included a conventional in-shot induced draft warm air furnace, an atmospheric fired hydronic boiler and a high efficiency hydronic boiler. The particulate (PM 2.5) measured ranged from 0.011 to 0.036 mg/MJ. depending on the raw material source used in their manufacture. All three stoves tested were fueled with premium (low ash) wood pellets obtained in a single batch to provide for uniformity in the test fuel. Unlike the oil and gas fired systems, the wood pellet stoves had measurable amounts of particulates sized above the 2.5-micron size that defines fine particulates (less than 2.5 microns). The fine particulate emissions rates ranged from 22 to 30 mg/ MJ with an average value

McDonald, R.

2009-12-01T23:59:59.000Z

204

Inexpensive solar-wood water heating combinations  

SciTech Connect

A promising batch heater recently built and now being tested consists of lengths of eight-inch galvanized culvert pipe painted with semiselective black coating, hooked in series and tied in as part of a passive closed loop, unpressurized solar-wood water heating combination. One 10-foot length of eight-inch culvert contains 14.6 gallons of water. Eight-inch culvert provides a near optimum surface area per unit volume ratio, resulting in quicker, more efficient solar water heating. Moreover, the proposed arrangement minimizes the mixing of hot with cold water as warm water is used, often a problem with many types of batch heaters. Details for constructing this type of batch heater are provided. The system is an unpressurized, closed loop set-up, which means that the same liquid circulates continually from solar heater to wood heater to storage tank heat exchanger. The collector design is a variation on the inverted batch heater which takes its inspiration from a number of solar designers of similar units and introduces several additional measures to take advantage of the wood heating connection and to improve the design based on operating experience.

Poitras, R.

1980-01-01T23:59:59.000Z

205

Leonard Wood and the American Empire  

E-Print Network (OSTI)

During the ten years following the Spanish American War (1898 to 1908), Major General Leonard Wood served as the primary agent of American imperialism. Wood was not only a proconsul of the new American Empire; he was a symbol of the empire and the age in which he served. He had the distinction of directing civil and military government in Cuba and the Philippines where he implemented the imperial policies given to him by the administrations of William McKinley and Theodore Roosevelt. In Cuba, he labored to rebuild a state and a civil society crippled by decades of revolutionary ferment and guided the administration's policy through the dangerous channels of Cuban politics in a way that satisfied – at least to the point of avoiding another revolution – both the Cubans and the United States. In the Philippines, Wood took control of the Moro Province and attempted to smash the tribal-religious leadership of Moro society in order to bring it under direct American rule. His personal ideology, the imperial policies he shepherded, and the guidance he provided to fellow military officers and the administrations he served in matters of colonial administration and defense shaped the American Empire and endowed it with his personal stamp.

Pruitt, James Herman

2011-05-01T23:59:59.000Z

206

Wood and Pellet Heating Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood and Pellet Heating Basics Wood and Pellet Heating Basics Wood and Pellet Heating Basics August 16, 2013 - 3:02pm Addthis Wood-burning and pellet fuel appliances use biomass or waste resources to heat homes or buildings. Types of Wood- and Pellet-Burning Appliances The following is a brief overview of the different types of wood and pellet fuel appliances available. High-Efficiency Fireplaces and Fireplace Inserts Designed more for show, traditional open masonry fireplaces should not be considered heating devices. Traditional fireplaces draw in as much as 300 cubic feet per minute of heated room air for combustion, then send it straight up the chimney. Fireplaces also produce significant air pollution. Although some fireplace designs seek to address these issues with dedicated air supplies, glass doors, and heat recovery systems, fireplaces are still

207

Wood as a fuel. (Latest citations from the NTIS Bibliographic database). Published Search  

SciTech Connect

The bibliography contains citations concerning the availability, combustion aspects, economics, and feasibility of using wood as fuel. Topics include wood-fuel power plants, wood waste fuels, district heating systems, wood burning furnaces and appliances, and wood waste generators. (Contains a minimum of 128 citations and includes a subject term index and title list.)

Not Available

1994-05-01T23:59:59.000Z

208

Regeneração de Floresta Secundária Eric A. Davidson Woods...  

NLE Websites -- All DOE Office Websites (Extended Search)

299 a 309. 1 Limitaes de Nutrientes para a Regenerao de Floresta Secundria Eric A. Davidson Woods Hole Research Center, Falmouth, Massachusetts, USA Luiz A. Martinelli...

209

Water Sampling At Little Valley Area (Wood, 2002) | Open Energy...  

Open Energy Info (EERE)

Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Little Valley Area (Wood, 2002) Exploration Activity Details Location...

210

Wood County Electric Coop, Inc | Open Energy Information  

Open Energy Info (EERE)

Wood County Electric Coop, Inc Place Texas Utility Id 20927 Utility Location Yes Ownership C NERC Location SPP NERC SPP Yes Activity Transmission Yes Activity Distribution Yes...

211

Wood-boring Insects of Trees and Shrubs  

E-Print Network (OSTI)

This publication explains how to identify and control wood-boring insects that invade shrubs and shade trees in Texas. 12 pages, 9 figures, 6 photographs, 1 table

Drees, Bastiaan M.; Jackman, John A.; Merchant, Michael E.

2008-06-17T23:59:59.000Z

212

Graphite/Copper Composites from Natural Wood Precursors  

Science Conference Proceedings (OSTI)

Graphite derived from natural wood precursors provides a uniquely anisotropic porous scaffold for the fabrication of graphite/copper composites. The wettability ...

213

The Viscoelastic Properties of Wood Cell Walls after Minimally ...  

Science Conference Proceedings (OSTI)

Samples were prepared on dried wood with no embedding resin within the cellular structure. Four types of analysis methods were used; the standard method, ...

214

City of Wood River, Nebraska (Utility Company) | Open Energy...  

Open Energy Info (EERE)

Nebraska (Utility Company) Jump to: navigation, search Name City of Wood River Place Nebraska Utility Id 20945 Utility Location Yes Ownership M NERC Location MRO NERC SPP Yes...

215

Wood Pulp Digetster Wall Corrosion Investigation  

DOE Green Energy (OSTI)

The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall.

Giles, GE

2003-09-18T23:59:59.000Z

216

Section 7.1.3 Wood Products: Greening Federal Facilities; Second...  

NLE Websites -- All DOE Office Websites (Extended Search)

wood is being used in a building, there is an opportunity to advance good forest management by specifying certified wood products. When wood is be- ing used for framing-more...

217

How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing  

E-Print Network (OSTI)

Parameters employed for heating of wood chips employed inParameters employed for heating of wood chips employed inW.T. , 2006. Estimating heating times of wood boards, square

Tam, Jerry

2013-01-01T23:59:59.000Z

218

Life in the woods : production and consumption of the urban forest  

E-Print Network (OSTI)

The use of wood is fraught with paradox. Wood as a building material is embraced for its naturalness, while the cutting of trees is indicted as a destruction of nature. Wood is lauded for its structural properties and ...

Volicer, Nadine (Nadine M.)

2012-01-01T23:59:59.000Z

219

Wood Pellet Heating Systems: The Earthscan Expert Handbook of Planning, Design and Installation  

Science Conference Proceedings (OSTI)

Wood Pellet Heating Systems is a comprehensive handbook covering all aspects of wood pellet heating technology. The use of wood pellets as an alternative heating fuel is already well established in several countries and is becoming widespread as fossil ...

Dilwyn Jenkins

2010-04-01T23:59:59.000Z

220

My voice shall fill the woods : Lydgate, poetic authority, and the canonization of Philomela  

E-Print Network (OSTI)

My Voice Shall Fill the Woods: Lydgate, Poetic Authority,My Voice Shall Fill the Woods: Lydgate, Poetic Authority,the nightingale fills the woods with song, beautiful and

Gillespie, Mary Elizabeth

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Digestive enzyme activities and gastrointestinal fermentation in wood-eating catfishes  

E-Print Network (OSTI)

our data on wild-caught wood-eating catWshes appear to bein the Amazo- nian basin, and the wood-eating species likelyby reducing the particle size of wood from coarse debris to

German, Donovan P.; Bittong, Rosalie A.

2009-01-01T23:59:59.000Z

222

North Woods River: The St. Croix River in Upper Midwest History  

E-Print Network (OSTI)

Review: North Woods River: The St. Croix River in Upperand Karamanski, Theodore J. North Woods River: The St. Croixbeauty and splendor. In North Woods River, Eileen M. McMahon

Karalus, Daniel E

2011-01-01T23:59:59.000Z

223

Metagenomic and functional analysis of hindgut microbiota of a wood-feeding higher termite  

E-Print Network (OSTI)

and western branches of the Wood/Ljungdahl pathway: how the1993). 55. Wood, T. Preparation of crystalline,of hindgut microbiota of a wood-feeding higher termite Falk

Warnecke, Falk

2008-01-01T23:59:59.000Z

224

Daughters of Dissent: Women as Warriors in Sembene Ousmane's God's Bits of Wood  

E-Print Network (OSTI)

Sembene. Gods Bits of Wood. Heinemann, Soyinka, Wole. Myth,novel, God's Bits of Wood, with particular reference to theOusmane's novel, God's Bits of Wood. It is important to note

Abdurrahman, Umar

2004-01-01T23:59:59.000Z

225

Save the tree of life or get lost in the woods  

E-Print Network (OSTI)

of life or get lost in the woods Biology Direct 2010, 5:44of life or get lost in the woods Ruben E Valas* 1 and PhilipOtherwise one gets lost in the woods of neutral evolution.

Valas, Ruben E; Bourne, Philip E

2010-01-01T23:59:59.000Z

226

The use of a permanent magnet for water content measurements of wood chips  

E-Print Network (OSTI)

Water Content Measurements of Wood Chips * P. J. Barale, C.measures the water content of wood chips, pulp and brownwater content measurements in wood chips in a magnetic field

2001-01-01T23:59:59.000Z

227

Wood Fired Steam Plants in Georgia  

E-Print Network (OSTI)

During the 1970's, Georgia industry experienced problems obtaining fuel for operations on several occasions. In particular, the very cold winter of 1976-77 resulted in natural gas curtailments which virtually shut down many of Georgia's industries. Shortly after that time, Georgia Tech and the Georgia Forestry Commission embarked on a number of projects directed toward providing the use of wood as an industrial energy source. This paper will present an overview of these programs with an emphasis on three demonstration plants that were built with partial financing by state and federal government.

Bulpitt, W. S.

1983-01-01T23:59:59.000Z

228

A Wood-Fired Gas Turbine Plant  

E-Print Network (OSTI)

This paper covers the research and development of a wood-fired gas turbine unit that is used for generating electricity. The system uses one large cyclonic combustor and a cyclone cleaning system in series to provide hot gases to drive an Allison T-56 aircraft engine (the industrial version is the 501-k). A Westinghouse 3,000-kW generator is used on the prototype facility with a Philadelphia gear system reducing the 14,000-rpm turbine output speed to the 3,600-rpm generator operating speed. Fuel is fed into the combustor by a rotary valve system. The swirling effect of the cyclone combustor ensures that residence time is adequate to completely burn all solid particles in the combustor ahead of the cyclone filter. Burning of particles on the metal walls of the cyclone filter could cause overheating and deterioration of the walls. This wood-fired gas turbine unit could provide a low cost source of power for areas where conventional methods are now prohibitive and provide a means for recovering energy from a source that now poses disposal problems.

Powell, S. H.; Hamrick, J. T.

1986-06-01T23:59:59.000Z

229

Silviculture: growing more wood on less land  

SciTech Connect

Maximizing the production of a concentrated, homogeneous wood supply virtually dictates intensively managed plantations. This management system implies: (1) improving the composite genotype of plantation trees; (2) optimizing their morphological and physiological condition prior to and at planting time; (3) improving the physiological environment of the crop at all stages of development; (4) protecting the plantation from pests and catastrophic events; and (5) modifying the shapes, dimensions, and qualities of crop trees to enhance the utility and value of harvested timber. Beneficiation of forest residuals for fiber and fuel is pushing forest industry relentlessly toward total stand utilization. Relative to the productivity of undisturbed or partially logged humid tropical forests, plantation growth rates represent four-fold to ten-fold increases in volume production. Displacement of some proportion of shifting agriculture and natural forest management systems by intensively managed plantations is desirable and biologically feasible. A key to successful tropical forest management and preservation is population stability, a condition toward which integrated wood conversion facilities supplied by a reliable plantation system can make a major contribution. There are some pressing and many esoteric reasons for conserving forest resources but pressures for utilizing and renewing these resources are immediate and unavoidable.

Gladstone, W.T.

1980-01-01T23:59:59.000Z

230

Modelling piloted ignition of wood and plastics  

SciTech Connect

Highlights: Black-Right-Pointing-Pointer We model piloted ignition times of wood and plastics. Black-Right-Pointing-Pointer The model is applied on a packed bed. Black-Right-Pointing-Pointer When the air flow is above a critical level, no ignition can take place. - Abstract: To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The incoming radiative heat flux, sample thickness and moisture content are some of the used variables. Not only the ignition time can be calculated with the model, but also the mass flux and surface temperature at ignition. The ignition times for softwoods and PMMA are mainly under-predicted. For hardwoods and PVC the predicted ignition times agree well with experimental results. Due to a significant scatter in the experimental data the mass flux and surface temperature calculated with the model are hard to validate. The model is applied on the startup of a municipal waste incineration plant. For this process a maximum allowable primary air flow is derived. When the primary air flow is above this maximum air flow, no ignition can be obtained.

Blijderveen, Maarten van [TNO, Schoemakerstraat 97, 2628 VK Delft (Netherlands); University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands); Bramer, Eddy A. [University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands); Brem, Gerrit, E-mail: g.brem@utwente.nl [University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands)

2012-09-15T23:59:59.000Z

231

Trends and Market Effects of Wood Energy Policies  

E-Print Network (OSTI)

Trends and Market Effects of Wood Energy Policies Bengt Hillring SLU SWEDEN http is the main international energy source · Climate change ­ Energy production ­ CO2 · European Union different the plans to increase #12;#12;Energy Sector Waste Sector Recovered Wood Sawdust Logging Residues Forest

232

Modeling and Rendering Physically-Based Wood Combustion  

Science Conference Proceedings (OSTI)

Rendering of wood combustion has received some attention recently, but prior work has not incorporated effects of internal wood properties such as density variation (i.e. "grain") and pre-combustion processes such as drying. In this paper we present ...

Roderick M. Riensche; Robert R. Lewis

2009-11-01T23:59:59.000Z

233

NREL: News Feature - Wood-Boring Gribbles Intrigue Researchers  

NLE Websites -- All DOE Office Websites (Extended Search)

Wood-Boring Gribbles Intrigue Researchers Wood-Boring Gribbles Intrigue Researchers July 24, 2013 This is a light-enhanced close-up of a tiny crustacean's head and torso, with what looks like fluorescent-blue antennae. Three of its legs are showing. Enlarge image A gribble is a tiny wood borer that produces its own enzyme that can devastate wood efficiently. Researchers hope that by studying gribbles they can learn ways to improve the process of turning biomass into liquid fuels. Courtesy Laura Michie, University of Portsmouth, United Kingdom Tiny wood borers known colloquially as gribbles make their own enzymes and use them to eat through docks in harbor towns, earning enmity from fishermen all around the world. Now, researchers from the Energy Department's National Renewable Energy Laboratory (NREL) and elsewhere are exploring whether that curse can be

234

Steam gasification of wood in the presence of catalysts  

SciTech Connect

Catalytic steam gasification of wood, including sawdust, chipped forest slash, and mill shavings, is being investigated. Results of laboratory, process development unit (PDU), and feasibility studies illustrate attractive processes for conversion of wood to methanol and a substitute natural gas (SNG). Recent laboratory studies developed a long-lived alloy catalyst for generation of a methanol synthesis gas by steam gasification of wood. Modification of the PDU for operation at 10 atm (150 psia) is nearly complete. The modified PDU will be operated at the elevated pressure to confirm yields and design parameters used in process feasibility studies. Feasibility studies were completed on wood-to-methane (SNG) and wood-to-methanol plants with capacities of 2000 and 200 oven dried tons (1800 and 180 metric t) per day using catalytic gasification. The results showed that generation of methanol on the large scale is economically viable today while SNG generation is competitive with future prices.

Mitchell, D.H.; Mudge, L.K.; Baker, E.G.

1981-01-01T23:59:59.000Z

235

Effects of wood fuel use on plant management  

SciTech Connect

During the winter of 1979-80, about 20% of homeowners in the New England region relied on wood fuel as their primary source of heat; an additional 30% used wood heat on a supplementary basis. The demand for wood put a great strain on the New England forests. However, experts in forest management believe that with proper management and utilization, national forest growth could replace as much as four billion gpy of oil by 2023. Implications for the forests of the Upper Great Lakes region of increased use of public and private woodlands for fuel are examined. Conflicts that could arise with the tourist and recreation industry, and with wilderness preservation interests, and discussed. Wood wastes generated by timber harvesting, sawmills, and lumber manufacturing could be collected and used as fuel, thus reducing the amount of raw wood resources needed to fill the increasing demand. (6 photos)

Harris, M.; Buckmann, C.A.

1980-09-01T23:59:59.000Z

236

Performance of bolted wood connections using supplemental confining devices  

E-Print Network (OSTI)

In the aftermath of the 1994 Northridge Earthquake, extensive field investigations revealed damage in wood frame construction in the form of splitting the 2x4 or 2x6 dimension lumber sill plates along the line of anchor bolts which typically connect shear walls to the masonry or concrete foundation. This paper presents an experimental investigation on the performance of bolted wood connections at the yield and ultimate limit states during monotonic and incremental quasi-static reversed cyclic loading and suggests possible retrofit strategies for their improved seismic performance. Proposed retrofit strategies are based on providing confinement to the bolted wood member using metal reinforcing ;traps and reinforcing clamps to increase the deformation capability and energy dissipation capacity of the connection, while maintaining substantial levels of connection strength. Connection types included in the investigation are: (1) double shear wood-to-wood connections; and (2) single shear simulated sill plate-to-concrete foundation connections.

Stromatt, Rebecca Faye

1996-01-01T23:59:59.000Z

237

Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely reliant on wood chip  

E-Print Network (OSTI)

Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely's biomass energy sector could be undermined unless businesses move to resolve the supply chain issues-scale biomass plants will leave generators largely reliant on biomass from overseas such as wood chips, elephant

238

Implementing Strategies for Drying and Pressing Wood Without Emissions Controls  

DOE Green Energy (OSTI)

Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal effects; Method 25A emissions from lumber drying can be modeled from a knowledge of the airflow through the kiln; A heat transfer model shows that VOCs released during hot-pressing mainly originate from the surface of the board; and Boiler ash can be used to adsorb formaldehyde from air streams.

Sujit Banerjee; Terrance Conners

2007-09-07T23:59:59.000Z

239

Homeowners energy conservation and consumption behavior: wood users and non/low wood users  

SciTech Connect

Relationships among energy expenditure, energy consumption, energy-budget share, energy managerial practices, housing, and household-membership factors for non/low wood-user and high wood-user households were examined to explain substitution of fuelwood for primary fuels. Data were from a nationwide representative sample of 1599 homeowners collected by the Department of Energy in 1982-1983 Residential Energy Conservation Survey. In three multivariate regression models, different dependent variables - energy expenditure, energy consumption, and energy budget share, were used. The same independent variables - housing factors, household energy managerial practices, and household membership factors, were used in the three models. Finally, in a fourth model, discriminant analysis with the dichotomous criterion variable of non/low or high wood users and significant variables from the multivariate regressions models were used to explain 34% of the variance. The amount of space heated, their appliance use, whether they had teenage children, and if they were single-earner households were significant explanatory variables in all four models.

Urich, J.R.

1986-01-01T23:59:59.000Z

240

Tax Deduction Qualified Software  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EnergyGauge Summit version 3.20 EnergyGauge Summit version 3.20 On this page you'll find information about the EnergyGauge Summit version 3.20 (incorporating DOE-2.1E (v120)) qualified computer software (buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 5 June 2009 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Florida Solar Energy Center 1679 Clearlake Road Cocoa, Florida 39922 http://www.energygauge.com

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Tax Deduction Qualified Software  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRACE 700 version 6.2.9 TRACE 700 version 6.2.9 On this page you'll find information about the TRACE 700 version 6.2.9 qualified computer software (www.buildings.energy.gov/qualified_software.html), which calculates energy and power cost savings that meet federal tax incentive requirements for commercial buildings. Date Documentation Received by DOE: 3 October 2012 Statements in quotes are from the software developer. Internal Revenue Code §179D (c)(1) and (d) Regulations Notice 2006-52, Section 6 requirements as amplified by Notice 2008-40, Section 4 requirements. (1) The name, address, and (if applicable) web site of the software developer; Trane 3600 Pammel Creek Road La Crosse, WI 54601 http://www.trane.com/trace (2) The name, email address, and telephone number of the person to contact for

242

Deductions and Exclusions......................................................................................................... 6  

E-Print Network (OSTI)

Burman is a senior fellow at the Urban Institute and director of the Tax Policy Center (TPC). Lim is a research assistant at the TPC and the Urban Institute. Rohaly is the director of tax modeling for the TPC and a senior research methodologist at the Urban Institute. The authors thank Chye-Ching Huang, Ellen Nissenbaum, and Roberton Williams for helpful comments, discussions, and suggestions, and Joy Falzarano and Renee Hendley for graphics editing. The views expressed are those of the authors and should not be attributed to the Urban Institute, its trustees, or its funders. ACKNOWLEDGMENTS

Leonard E. Burman; Katherine Lim; Jeffrey Rohaly

2008-01-01T23:59:59.000Z

243

Prioritizing wood energy crop feedstock qualities for biofuel systems improvement  

SciTech Connect

Knowledge engineering or expert systems is needed in biofuel systems to adequately prioritize wood energy crop traits on which research and development should focus. Objectives at the various stages of the total biofuel process are clarifying the demands that will be placed on feedstock qualities. These objectives are forming more clearly from developments in the growing, handling, and conversion of wood under operational and regulatory circumstances. A process for systematic prioritization of wood qualities for possible improvement is presented in the content of the entire biofuel process.

Ranney, J.W.

1991-01-01T23:59:59.000Z

244

Prioritizing wood energy crop feedstock qualities for biofuel systems improvement  

SciTech Connect

Knowledge engineering or expert systems is needed in biofuel systems to adequately prioritize wood energy crop traits on which research and development should focus. Objectives at the various stages of the total biofuel process are clarifying the demands that will be placed on feedstock qualities. These objectives are forming more clearly from developments in the growing, handling, and conversion of wood under operational and regulatory circumstances. A process for systematic prioritization of wood qualities for possible improvement is presented in the content of the entire biofuel process.

Ranney, J.W.

1991-12-31T23:59:59.000Z

245

Wood-Polymer composites obtained by gamma irradiation  

Science Conference Proceedings (OSTI)

In this work we impregnate three Peruvian woods (Calycophy spruceanum Be, Aniba amazonica Meiz and Hura crepitans L) with styrene-polyester resin and methyl methacrylate. The polymerization of the system was promoted by gamma radiation and the experimental optimal condition was obtained with styrene-polyester 1:1 and 15 kGy. The obtained composites show reduced water absorption and better mechanical properties compared to the original wood. The structure of the wood-polymer composites was studied by light microscopy. Water absorption and hardness were also obtained.

Gago, J. [Instituto Peruano de Energia Nuclear, Av. Canada 1470 Lima 41 (Peru); Lopez, A.; Rodriguez, J. [Instituto Peruano de Energia Nuclear, Av. Canada 1470 Lima 41 (Peru); Facultad de Ciencias, Universidad Nacional de Ingenieria, Av. Tupac Amaru 210, Lima 25 (Peru); Santiago, J. [Instituto Peruano de Energia Nuclear, Av. Canada 1470 Lima 41 (Peru); Facultad de Quimica e Ing. Quimica, Universidad Nacional Mayor de San Marcos, Lima 1 (Peru); Acevedo, M. [Facultad de Ciencias Forestales, Universidad Nacional Agraria la Molina, Lima 12 (Peru)

2007-10-26T23:59:59.000Z

246

Improved Process control of wood waste fired boilers  

DOE Green Energy (OSTI)

This project's principal aim was the conceptual and feasibility stage development of improved process control methods for wood-waste-fired water-tube boilers operating in industrial manufacturing applications (primarily pulp and paper). The specific objectives put forth in the original project proposal were as follows: (1) fully characterize the wood-waste boiler control inter-relationships and constraints through data collection and analysis; (2) design an improved control architecture; (3) develop and test an appropriate control and optimization algorithm; and (4) develop and test a procedure for reproducing the approach and deriving the benefits on similar pulp and paper wood-waste boilers. Detailed tasks were developed supporting these objectives.

Process Control Solutions, Inc.

2004-01-30T23:59:59.000Z

247

An economical and market analysis of Canadian wood pellets.  

Science Conference Proceedings (OSTI)

This study systematically examined the current and future wood pellet market, estimated the cost of Canadian torrefied pellets, and compared the torrefied pellets with the conventional pellets based on literature and industrial data. The results showed that the wood pellet industry has been gaining significant momentum due to the European bioenergy incentives and the rising oil and natural gas prices. With the new bioenergy incentives in USA, the future pellets market may shift to North America, and Canada can potentially become the largest pellet production centre, supported by the abundant wood residues and mountain pine beetle (MPB) infested trees.

Peng, J. [University of British Columbia, Vancouver

2010-08-01T23:59:59.000Z

248

Uses and Desirable Properties of Wood in the 21st Century  

E-Print Network (OSTI)

of commercial de- velopment is use of wood pellet fuel to pro- duce heat or electric power. Wood pellets for the pellet Figure 2. Global production of paper and paperboard and wood panels by principal (continental, and production of nano-enabled materials and products are expected to increasingly shape wood use as the 21st

249

Method for lowering the VOCS emitted during drying of wood products  

DOE Patents (OSTI)

The present invention is directed to a method for removal of VOCs from wood products prior to drying the wood products. The method of the invention includes the steps of providing a chamber having an opening for receiving wood and loading the chamber with green wood. The wood is loaded to an extent sufficient to provide a limited headspace in the chamber. The chamber is then closed and the wood is heated in the chamber for a time and at a temperature sufficient to saturate the headspace with moisture and to substantially transfer VOCs from the wood product to the moisture in the headspace.

Banerjee, Sujit (1832 Jacksons Creek Point, Marietta, GA 30068); Boerner, James Robert (154 Junedale Rd., Cincinnati, OH 45218); Su, Wei (2262 Orleans Ave., Marietta, GA 30062)

2000-01-01T23:59:59.000Z

250

Contribution of organic carbon to wood smoke particulate matter absorption  

NLE Websites -- All DOE Office Websites (Extended Search)

Contribution of organic carbon to wood smoke particulate matter absorption Contribution of organic carbon to wood smoke particulate matter absorption of solar radiation Title Contribution of organic carbon to wood smoke particulate matter absorption of solar radiation Publication Type Journal Article Year of Publication 2012 Authors Kirchstetter, Thomas W., and Tracy L. Thatcher Journal Atmospheric Chemistry and Physics Volume 12 Pagination 6067-6072 Abstract A spectroscopic analysis of 115 wintertime partic- ulate matter samples collected in rural California shows that wood smoke absorbs solar radiation with a strong spectral se- lectivity. This is consistent with prior work that has demon- strated that organic carbon (OC), in addition to black car- bon (BC), appreciably absorbs solar radiation in the visible and ultraviolet spectral regions. We apportion light absorp-

251

International WoodFuels LLC | Open Energy Information  

Open Energy Info (EERE)

WoodFuels LLC WoodFuels LLC Jump to: navigation, search Name International WoodFuels LLC Place Portland, Maine Zip 4101 Product Maine-based pellet producer and installer of commercial wood pellet heating systems. Coordinates 45.511795°, -122.675629° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.511795,"lon":-122.675629,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

252

Stanford - Woods Institute for the Environment | Open Energy Information  

Open Energy Info (EERE)

Stanford - Woods Institute for the Environment Stanford - Woods Institute for the Environment Jump to: navigation, search Logo: Stanford- Woods Institute for the Environment Name Stanford- Woods Institute for the Environment Address 473 Via Ortega Place Stanford, California Zip 94305 Region Bay Area Coordinates 37.427774°, -122.175672° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.427774,"lon":-122.175672,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

253

Residential Wood Heating Fuel Exemption (New York) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Wood Heating Fuel Exemption (New York) Wood Heating Fuel Exemption (New York) Residential Wood Heating Fuel Exemption (New York) < Back Eligibility Multi-Family Residential Residential Savings Category Bioenergy Maximum Rebate None Program Info State New York Program Type Sales Tax Incentive Rebate Amount 100% exemption Provider New York State Department of Taxation and Finance New York exempts retail sales of wood used for residential heating purposes from the state sales tax. The law also permits local governments (municipalities and counties) to grant an exemption from local sales taxes. If a city with a population of 1 million or more chooses to grant the local exemption, it must enact a specific resolution that appears in the state law. Local sales tax rates in New York range from 1.5% to more than 4% in

254

John H. Wood Gary R. Long David F. Morehouse Energy ...  

U.S. Energy Information Administration (EIA)

Long-Term World Oil Supply Scenarios The Future Is Neither as Bleak or Rosy as Some Assert John H. Wood Gary R. Long David F. Morehouse Energy Information Administration

255

Test evaluation of a laminated wood wind turbine blade concept  

SciTech Connect

Because of the high stiffness and fatigue strength of wood (as compared to density) along with the low cost manufacturing techniques available, a laminated wood wind turbine blade application has been studied. This report presents the results of the testing performed on elements of the wood blade-to-hub transition section which uses steel studs cast into a laminated wood spar with a filled epoxy. Individual stud samples were tested for both ultimate load carrying capability and fatigue strength. A one-time pull-out load of 78,000 lb was achieved for a 15 in. long stud with a diameter of 1 in. Tension-tension fatigue indicated that peak loads on the order of 40% of ultimate could be maintained as an endurance limit (mean load = 20,000 lb, cyclic load = +-15,000 lb). Following the individual stud testing, a full-scale inboard blade section (20 ft in length) was tested.

Faddoul, J.R.

1981-05-01T23:59:59.000Z

256

DOE Joint Genome Institute: Rot's Unique Wood Degrading Machinery...  

NLE Websites -- All DOE Office Websites (Extended Search)

February 5, 2009 Rot's Unique Wood Degrading Machinery to be Harnessed for Better Biofuels Production WALNUT CREEK, CA-An international team led by scientists from the U.S....

257

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

Opportunities -MDF- Market Opportunities -MDF- The first MDF plant started up four years ago and now there are 3 the substrate of choice for exotic wood veneer layup. Pressing veneer on MDF will give the most defect

258

Signatures of surface bundles and Milnor Wood inequalities  

E-Print Network (OSTI)

Let E be a surface bundle over a surface. We use a variant of the Milnor Wood inequality to show that $|3\\sigma(E)|\\leq \\chi(E)$.

Hamenstaedt, Ursula

2012-01-01T23:59:59.000Z

259

Methanol synthesis gas from catalytic steam reforming of wood  

DOE Green Energy (OSTI)

Laboratory studies were successful in developing catalyst systems and operating conditions for generation of a methanol synthesis gas, a mixture of hydrogen, carbon monoxide and carbon dioxide. Some methane remained in the gas mixture. Wood was reacted with steam at a steam-to-wood weight ratio of about 0.9 and a temperature of 750/sup 0/C (1380/sup 0/F) in the presence of several catalysts. Results are presented for two different catalyst systems.

Mudge, L.K.; Mitchell, D.H.; Robertus, R.J.; Weber, S.L.; Sealock, L.J. Jr.

1981-01-01T23:59:59.000Z

260

The adoption of e-commerce for wood enterprises  

Science Conference Proceedings (OSTI)

Lately, the internet has become a major means in electronic commerce (e-commerce), as it offers various advantages and benefits. In Greece, there are many Small- and Medium-sized Enterprises (SMEs) in the context of the timber ... Keywords: Greece, ICT adoption, PROMETHEE II method, SMEs, e-commerce, electronic commerce, multi-criteria analysis, small and medium-sized enterprises, timber trade, web content, website ranking, wood processing, wood products

Z. S. Andreopoulou; T. Koutroumanidis; B. Manos

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Extracellular oxidative metabolism of wood decay fungi  

DOE Green Energy (OSTI)

Substantial progress has been made toward understanding the fundamental physiology and genetics of wood decay fungi, microbes that are capable of degrading all major components of plant cell walls. Efficient utilization of lignocellulosic biomass has been hampered in part by limitations in our understanding of enzymatic mechanisms of plant cell wall degradation. This is particularly true of woody substrates where accessibility and high lignin content substantially complicate enzymatic 'deconstruction'. The interdisciplinary research has illuminated enzymatic mechanisms essential for the conversion of lignocellulosics to simple carbohydrates and other small molecular weight products. Progress was in large part dependent on substantial collaborations with the Department of Energy's Joint Genome Institute (JGI) in Walnut Creek and Los Alamos, as well as the Catholic University, Santiago, Chile, the Royal Institute of Technology, Stockholm, the University of Minnesota, St. Paul, and colleagues at the University of Wisconsin and the Forest Products Laboratory. Early accomplishments focused on the development of experimental tools (2, 7, 22, 24-26, 32) and characterization of individual genes and enzymes (1, 3-5, 8, 9, 11, 14, 15, 17, 18, 23, 27, 33). In 2004, the genome of the most intensively studied lignin-degrading fungus, Phanerochaete chrysosporium, was published (21). This milestone lead to additional progress on this important model system (6, 10, 12, 13, 16, 28-31) and was further complemented by genome analysis of other important cellulose-degrading fungi (19, 20). These accomplishments have been highly cited and have paved the way for whole new research areas.

Daniel Cullen

2010-04-21T23:59:59.000Z

262

Moisture Distribution and Flow During Drying of Wood and Fiber  

DOE Green Energy (OSTI)

New understanding, theories, and techniques for moisture flow and distribution were developed in this research on wood and wood fiber. Improved understanding of the mechanisms of flake drying has been provided. Observations of flake drying and drying rate curves revealed that rate of moisture loss consisted of two falling rate periods and no constant rate drying period was observed. Convective heat transfer controls the first period, and bound water diffusion controls the second period. Influence of lower drying temperatures on bending properties of wood flakes was investigated. Drying temperature was found to have a significant influence on bending stiffness and strength. A worksheet for calculation of the energy required to dry a single strandboard flake was developed but has not been tested in an industrial setting yet. A more complete understanding of anisotropic transverse shrinkage of wood is proposed based on test results and statistical analysis. A simplified mod el of a wood cell's cross-section was drawn for calculating differential transverse shrinkage. The model utilizes cell wall thickness and microfibrillar packing density and orientation. In spite of some phenomena of cell wall structure not yet understood completely, the results might explain anisotropic transverse shrinkage to a major extent. Boundary layer theory was found useful for evaluating external moisture resistance during drying. Simulated moisture gradients were quire comparable to the actual gradients in dried wood. A mathematical procedure for determining diffusion and surface emission coefficients was also developed. Thermal conductivity models of wood derived from its anatomical structure were created and tested against experimental values. Model estimations provide insights into changes in heat transfer parameters during drying. Two new techniques for measuring moisture gradients created in wood during drying were developed. A new technique that utilizes optical properties of cobalt chloride was developed for nondestructive determination of surface moisture content. Fundamental new understanding of drying characteristics in wood and fiber has been provided that can be used by researchers to improve drying of wood and fiber. The three techniques for measuring moisture content and gradients provided in this study are efficient, practical, and economical - easy to apply by industry and researchers. An energy consumption worksheet is provided as a first step toward reducing energy consumed during drying of lumber and strandboard flakes. However, it will need additional verification and testing.

Zink-Sharp, Audrey; Hanna, Robert B.

2001-12-28T23:59:59.000Z

263

Contesting Governance in the Global Marketplace: A Sociological Assessment of British Efforts to Build New Markets for NGO-Certified Sustainable Wood Products  

E-Print Network (OSTI)

Towards Environmentally Sound Wood Products In the Britishof the Earth. 1995. “The Good Wood Guide. ” Friends of theRamachandra. 1990. The Unquiet Woods: Ecological Change and

McNichol, Jason

2000-01-01T23:59:59.000Z

264

A distributed approach to accounting for carbon in wood products  

SciTech Connect

With an evolving political environment of commitments to limit emissions of greenhouse gases, and of markets to trade in emissions permits, there is growing scientific, political, and economic need to accurately evaluate carbon (C) stocks and flows especially those related to human activities. One component of the global carbon cycle that has been contentious is the stock of carbon that is physically held in harvested wood products. The carbon stored in wood products has been sometimes overlooked, but the amount of carbon contained in wood products is not trivial, it is increasing with time, and it is significant to some Parties. This paper is concerned with accurate treatment of harvested wood products in inventories of CO2 emissions to the atmosphere. The methodologies outlined demonstrate a flexible way to expand current methods beyond the assumption of a simple, first-order decay to include the use of more accurate and detailed data while retaining the simplicity of simple formulas. The paper demonstrates that a more accurate representation of decay time can have significant economic implications in a system where emissions are taxed or emissions permits are traded. The method can be easily applied using only data on annual production of wood products and two parameters to characterize their expected lifetime. These methods are not specific to wood products but can be applied to long-lived, carbon-containing products from sources other than wood, e.g. long-lived petrochemical products. A single unifying approach that is both simple and flexible has the potential to be both more accurate in its results, more efficient in its implementation, and economically important to some Parties.

Marland, Eric [Appalachian State University; Stellar, Kirk [Appalachian State University; Marland, Gregg [ORNL

2010-01-01T23:59:59.000Z

265

Feasibility of Achieving a Zero-Net-Energy, Zero-Net-Cost Homes  

E-Print Network (OSTI)

There is a wood stove backup heating: 80% efficiency, 11 remaining heating requirement is covered by a  wood stove heating 13.3 kWh/m²a (calculated sit e energy)  Energy source electricity, wood 

Al-Beaini, S.

2010-01-01T23:59:59.000Z

266

Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary  

DOE Green Energy (OSTI)

The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

Levi, M. P.; O'Grady, M. J.

1980-02-01T23:59:59.000Z

267

Cofiring Wood and Coal to Stoker Boilers in Pittsburgh  

DOE Green Energy (OSTI)

The prime objective of the University of Pittsburgh's overall wood/coal cofiring program is the successful introduction of commercial cofiring of urban wood wastes into the stoker boilers of western Pennsylvania. Central to this objective is the demonstration test at the Pittsburgh Brewing Company. In this test the project team is working to show that two commercially-available clean wood wastes - tub-ground pallet waste and chipped clearance wood - can be included in the fuel fed daily to an industrial stoker boiler. Irrespective of its economic outcome, the technical success of the demonstration at the brewery will allow the local air quality regulation agency to permit a parametric test at the Bellefield Boiler Plant. The objective of this test is to obtain comprehensive data on all key parameters of this operational boiler while firing wood with coal. The data would then be used for thorough generic technical and economic analyses. The technical analysis would be added to the open literature for the general planning and operational guidance for boiler owners and operators. The economic analysis would gage the potential for providing this stoker fuel commercially in an urban setting and for purchasing it regularly for combustion in an urban stoker boiler.

Cobb, J.T., Jr.; Elder, W.W.

1997-07-01T23:59:59.000Z

268

The evolution and ecology of interspecific territoriality: Studies of Anolis lizards and North American wood-warblers  

E-Print Network (OSTI)

and E. Bermingham. 2002. What is a wood-warbler? Molecularmultilocus phylogeny for the wood-warblers and a revisedplayback experiments with wood warblers. Ecology 82:207-218.

Losin, Neil

2012-01-01T23:59:59.000Z

269

ENERGY BUDGETS AND MASONRY HOUSES: A PRELIMINARY ANALYSIS OF THE COMPARATIVE ENERGY PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES  

E-Print Network (OSTI)

ENERGY PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES David B.PERFORMANCE OF MASONRY AND WOOD-FRAME HOUSES David B. Goldsfor those studies used wood- frame construction, The energy

Goldstein, David B.

2012-01-01T23:59:59.000Z

270

Understanding wood-pool dynamics using long-term monitoring data from the Gualala River Watershed: What can we learn?  

E-Print Network (OSTI)

and D. R. Montgomery. 2003. Wood in river rehabilitation andPatterns and process of wood debris accumulation in theand S. V. Gregory. 2002. Large wood and fluvial processes.

Church, Tamara

2012-01-01T23:59:59.000Z

271

Linda Sargent Wood. A More Perfect Union: Holistic Worldviews and the Transformation of American Culture after World War II.  

E-Print Network (OSTI)

23 No. 1 Linda Sargent Wood. A More Perfect Union: HolisticCold War era, Linda Sargent Wood argues that the equallyWorld War II period. For Wood, this cultural perspective

Promnitz, Sarah

2012-01-01T23:59:59.000Z

272

2014 Electricity Forms Reclearance: Renewable Electricity  

U.S. Energy Information Administration (EIA)

yourself)? – How much did you pay for this generation. ... PV cells/modules, wind turbines, wood stoves, geothermal heat pumps • Why: 1. Calibrate ...

273

2014 Electricity Forms Reclearance: Renewable Electricity  

U.S. Energy Information Administration (EIA)

How much generation/credits did you purchase (not generate yourself)? ... PV cells/modules, wind turbines, wood stoves, geothermal heat pumps. Why: 1.

274

2009 Residential Energy Consumption Survey  

U.S. Energy Information Administration (EIA)

6 Built-in room heater burning gas, oil, or kerosene? 7 Heating stove burning wood, coal, or coke (IF VOLUNTEERED) 8 Portable electric heaters (IF VOLUNTEERED)

275

Buoyancy and stratification in Boussinesq flow with applications to natural ventilation and intrusive gravity currents  

E-Print Network (OSTI)

heating or air conditioning systems, as discussed by Woodsheating on simple household stoves using unpro- cessed solid fuels [most often wood

Flynn, Morris R.

2006-01-01T23:59:59.000Z

276

Index Handbook 130 – 2014  

Science Conference Proceedings (OSTI)

... Distillate 176. E85 Fuel Ethanol 176. Electric vehicle suppy equipment (EVSE) 135. ... Fireplace and stove wood 115. Fixed service (EVSE) 135. ...

2013-10-25T23:59:59.000Z

277

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

http:energy.govsavingsladwp-feed-tariff-fit-program-california Rebate Clean-Burning Wood Stove Grant Program (Maryland) The Maryland Energy Administration (MEA) now...

278

Tax Credits, Rebates & Savings | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Property Tax Assessment for Renewable Energy Equipment Arizona Utility Bioenergy Water Buying & Making Electricity Solar Wind Arizona Department of Revenue Qualifying Wood Stove...

279

Energy Efficiency and Conservation Block Grant Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

furnaces with wood stoves for home heating to the community to reduce fossil fuel consumption and electricity use. EECBG funding would bc used to purchase the equipment...

280

CX-004576: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

furnaces with wood stoves for home heating to the community to reduce fossil fuel consumption and electricity use. Energy Efficiency and Conservation Block Grant funding...

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hancock-Wood Electric Coop Inc | Open Energy Information  

Open Energy Info (EERE)

Hancock-Wood Electric Coop Inc Hancock-Wood Electric Coop Inc Jump to: navigation, search Name Hancock-Wood Electric Coop Inc Place Ohio Utility Id 8034 Utility Location Yes Ownership C NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Farm Service-R-107 Commercial Farm Sevice R-207 Commercial Farm Sevice R-207(Transformer Capacity in Excess of 25kVA) Commercial LPS Rate 12 (Mainland) Industrial LPS Rate 12KI (Kelleys Island) Industrial NR Rate GS-8KI (Kelleys Island) Commercial NR Rate GS-8M (Mainland) Commercial NR Rate GS-9KI - Kelleys Island Over 25 kW Commercial

282

Water Sampling At International Geothermal Area, New Zealand (Wood, 2002) |  

Open Energy Info (EERE)

International Geothermal Area, New Zealand (Wood, 2002) International Geothermal Area, New Zealand (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At International Geothermal Area New Zealand (Wood, 2002) Exploration Activity Details Location International Geothermal Area New Zealand Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley

283

Hogged Wood Fuel Supply and Price Analysis : Final Report.  

SciTech Connect

This study discusses the factors that determine the supply and demand for hogged wood in the Pacific Northwest, with particular emphasis on the role of the regional pulp and paper industry and lumber industry. Because hogged wood is often a substitute for conventional fuels, the consumption and price of natural gas, electricity, fuel oil and coal are also addressed. A detailed and comprehensive examination of the indicies relating to the hogged wood market is provided, including analysis and graphing of all time series variables. A spreadsheet- based forecasting model is developed and presented with an emphasis on explaining the process used to arrive at the final model. 42 refs., 46 figs., 14 tabs. (MHB)

Biederman, Richard T.; Blazek, Christopher F.

1991-05-01T23:59:59.000Z

284

Wood for energy and rural development: the Philippine experience  

Science Conference Proceedings (OSTI)

The Philippine wood energy programme (dendro-thermal system) was originally developed as a source of energy independent of imported oil, and at a lower cost than oil. It has social benefits: new jobs, land distribution, rural income increment, and reforestation by tree farmers. Tree farming, its administration and organization of farmer institutions are essential to the programme, as are the development of farming techniques to produce energy, trees (growth of ipil-ipil), and an improved tree growth rate. An analysis of the economics of wood energy led to the conclusion that raw wood fuel can be cheaper than oil. In estimated costs of electricity, the dendro-thermal plants can produce power at competitive rates. 36 references.

Denton, F.H.

1983-01-01T23:59:59.000Z

285

Water Sampling At Heber Area (Wood, 2002) | Open Energy Information  

Open Energy Info (EERE)

Heber Area (Wood, 2002) Heber Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Heber Area (Wood, 2002) Exploration Activity Details Location Heber Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the Salton Sea and Heber geothermal fields of southern California; and 7) the

286

Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips  

DOE Patents (OSTI)

A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

Dooley, James H; Lanning, David N

2013-08-13T23:59:59.000Z

287

Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program Eligibility Multi-Family Residential...

288

Name: Qinglin Wu Title: Roy O Martin Sr. Professor, Composites and Engineered Wood Products  

E-Print Network (OSTI)

Department: School of Renewable Natural Resources Mailing Address: 107 Renewable-Natural-Resources Building Louisiana Forest Products Development Center (LFPDC) School of Renewable Natural Resources Louisiana State. China. RESEARCH INTERESTS Wood and natural fiber polymer composites, engineered wood products, composite

289

Assessment of existing feuds data base for identification of potential industrial wood users in North Carolina  

DOE Green Energy (OSTI)

The North Carolina Wood Assistance Team's evaluation of the Ultrasystems' computerized methodology for identifying high potential wood conversion facilities is presented. The analysis, methodology, and data are found to be inadequate for the intended use.

Gustashaw, D.H.

1981-03-01T23:59:59.000Z

290

EA-1850: Flambeau River BioFuels, Inc. Proposed Wood Biomass...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

850: Flambeau River BioFuels, Inc. Proposed Wood Biomass-to-Liquid Fuel Biorefinery, Park Falls, Wisconsin EA-1850: Flambeau River BioFuels, Inc. Proposed Wood Biomass-to-Liquid...

291

EA-1811: NewPage Corporation Wood Biomass to Liquid Fuel, Wisconsin...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1: NewPage Corporation Wood Biomass to Liquid Fuel, Wisconsin Rapids, Wisconsin EA-1811: NewPage Corporation Wood Biomass to Liquid Fuel, Wisconsin Rapids, Wisconsin Summary This...

292

Methanol production from eucalyptus wood chips. Attachment VIII. The wood-fueled gasification system, Evergreen Energy Corporation's final engineering report  

DOE Green Energy (OSTI)

Evergreen Energy Corporation provided projected cost and operating data on the Evergreen/Texaco entrained-bed wood gasification system currently under development as an alternative to the state-of-the-art fixed-bed wood gasification system proposed by Davy McKee. Overall capital costs for the total plant remain about the same at approx. $250 million. The Evergreen/Texaco system will provide significant capital cost savings in the gasifiers, gas cleanup, and waste water treatment sections, and eliminate the need for a large off-site wood-fired power boiler. These reductions are offset by higher investments in the feedstock preparation, drying, and feeding section plus the need for a larger air separation plant and compressor to supply oxygen at high pressure to the gasifier.

Fishkind, H.H.

1982-06-01T23:59:59.000Z

293

Field Guide: Visual Inspection of Wood Structures (Optimized for Electronic Viewing)  

Science Conference Proceedings (OSTI)

The Field Guide: Visual Inspection of Wood Structures is a catalog of photographs illustrating various conditions and factors that commonly affect transmission line wood structures, along with their likely causes, a Maintenance Priority Rating, and suggested actions to be taken by utility personnel. Poles, cross-arms, cross-arm braces, X-braces, brackets, anchor rods, guy wires, and direct imbedded foundations are covered. Other sections include types of wood structures, the anatomy of wood ...

2011-11-09T23:59:59.000Z

294

Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania  

E-Print Network (OSTI)

Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania International Wood Energy Market Developments Ed Pepke Forest Products Marketing Specialist UNECE/FAO Timber Section, Geneva #12;Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania Subjects I

295

Development of Wood Chips and Pellets market in Slovakia Jozef Viglasky, SK-BIOM, Slovakia  

E-Print Network (OSTI)

is supported by the Danish Government. One of the main barriers for extension of wood pellet production is lack1 Development of Wood Chips and Pellets market in Slovakia Jozef Viglasky, SK-BIOM, Slovakia-combustion of wood residues in existing coal fired power systems. #12;3 · Implementation of low cost anaerobic

296

Hydrologic and Water-Quality Conditions During Restoration of the Wood River Wetland,  

E-Print Network (OSTI)

.S. Geological Survey #12;Front Cover: Aerial view of the lower Wood River Valley showing the Wood River Wetland.S. Geological Survey, January 2003. #12;Hydrologic and Water-Quality Conditions During Restoration of the Wood­5004 U.S. Department of the Interior U.S. Geological Survey #12;U.S. Department of the Interior KEN

297

Discrimination of bark from wood chips through texture analysis by image processing  

Science Conference Proceedings (OSTI)

Utilization of wood chips for bioenergy requires classification and segregation of the constituents of the chipped mass to help optimize energy conversion. Wood chips obtained from processes such as forest thinning can contain a considerable amount of ... Keywords: Bark, Biomass, Image processing, Texture analysis, Wood chip

James R. Wooten; S. D. Filip To; C. Igathinathane; L. O. Pordesimo

2011-10-01T23:59:59.000Z

298

EFFECTS OF SAMPLE SIZE ON CHARACTERIZATION OF WOOD-PARTICLE LENGTH DISTRIBUTION  

E-Print Network (OSTI)

EFFECTS OF SAMPLE SIZE ON CHARACTERIZATION OF WOOD-PARTICLE LENGTH DISTRIBUTION Quang V. Cao of sample size on fitting length distribution of wood particles used for manufacturing wood-based composites moments and the ability of the sample distributions to characterize the population represented

299

Woods Hole Research Center Wind Turbine | Open Energy Information  

Open Energy Info (EERE)

Hole Research Center Wind Turbine Hole Research Center Wind Turbine Jump to: navigation, search Name Woods Hole Research Center Wind Turbine Facility Woods Hole Research Center Wind Turbine Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner Woods Hole Research Center Developer Sustainable Energy Developments Energy Purchaser Woods Hole Research Center Location Falmouth MA Coordinates 41.548637°, -70.64326° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.548637,"lon":-70.64326,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

300

Wood Waste -A Modern Fuel M. A. SERRELL, P. E.  

E-Print Network (OSTI)

, designed like the vanes of a fan WOOD BO'LER SACK r-v'"",", __--J DAMF[R · I ... .... .... .... ... ... FAN and provides automatic steam generation on an unattended basis. A flyash arrestor with induced draft fan fashioned boiler design where the boiler shell is pierced by a number of longitudinal fire tubes which run

Columbia University

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Production of chemical feedstock by the methanolysis of wood  

DOE Patents (OSTI)

A process is discussed for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700/sup 0/C to 1200/sup 0/C, at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

Steinberg, M.; Fallon, P.

1983-06-01T23:59:59.000Z

302

Short rotation wood crops program: Annual progress report for 1986  

DOE Green Energy (OSTI)

This report describes accomplishments in the Short Rotation Woody Crops Program (SRWCP) for the year ending September 30, 1986. The program is sponsored by the US Department of Energy's Biofuels and Municipal Waste Technology Division and consists of research projects at 29 institutions and corporations. The SRWCP is an integrated program of research and development devoted to a single objective: improving the productivity, cost efficiency, and fuel quality of wood energy crops as feedstocks for conversion to liquid and gaseous fuels. SRWCP directives have shifted from species-screening and productivity evaluations to large-scale viability trials of model species selected for their productivity potential and environmental compatibility. Populus was chosen the lead genera of five model species, and initial steps were taken toward organizing a Populus Research Consortium. Production yields from SRWCP research plots and coppice studies are discussed along with new efforts to model growth results and characteristics on a tree and stand basis. Structural and chemical properties of short-rotation intensive culture wood have been evaluated to determine the desirability of species traits and the potential for genetic improvements. Innovative wood energy crop handling techniques are presented as significant cost reduction measures. The conclusion is that new specialized wood energy crops can be feasible with the advances that appear technically possible over the next 10 years. 34 refs., 9 figs., 7 tabs.

Ranney, J.W.; Wright, L.L.; Layton, P.A.; McNabb, W.A.; Wenzel, C.R.; Curtin, D.T.

1987-11-01T23:59:59.000Z

303

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

Point, NC, 27261, USA Tel.: (336) 841 8535 Fax.: (336) 841 5435 151 Randall St. Oakville, ON Canada, L6J SituationThe Situation As global populations continue to grow, the demand for wood products will increase in: Cultures Technology Infrastructure #12;Demand: Overall ClimateDemand: Overal

304

Temperature Measurements in Full-Scale Wood Stud Shear Walls  

E-Print Network (OSTI)

This report presents the results of 10 full-scale fire resistance tests conducted at the National Fire Laboratory on load-bearing gypsum board protected, wood stud shear wall assemblies with and without resilient channels on the fire-exposed side. The two assembly arrangements studied were: symmetrical installation 1x1 (one layer of gypsum board on each of the exposed and unexposed sides) and asymmetrical installation of the shear membrane (one layer of gypsum board on both the exposed and unexposed sides and a shear wall membrane as a base layer alternating between the exposed (2x1) and unexposed sides (1x2)) on a wood stud frame. The gypsum board was 12.7 mm thick Type X. The insulations used were glass and rock fibres. The shear membranes used were plywood and oriented strand board (OSB). Tests were conducted to determine the effects of the placement of the shear membrane on the exposed/unexposed face, type of shear membrane, insulation type, load intensity and resilient channel installations on the fire resistance of gypsum board protected, wood stud shear wall assemblies. Details of the results, including the temperatures and deflections measured during the fire tests, are presented. ACKNOWLEDGEMENTS This research is part of a consortium project on the fire resistance and sound performance of wall assemblies - Phase II, among the following partners: . Canadian Wood Council . Canadian Home Builders Association . Canadian Sheet Steel Building Institute . Gypsum Manufacturers of Canada . Owens-Corning Canada . Roxul Inc.

V. K. R. Sultan; M. A. Denham; V. K. R. Kodur; M. A. Sultan; E. M. A. Denham; Canadian Wood Council; Shear Walls; Shear Walls; Shear Walls; Shear Walls

1996-01-01T23:59:59.000Z

305

An Overview of the Louisiana Secondary Wood Products Industry  

E-Print Network (OSTI)

the State of Louisiana. In addition, because the origin of material purchased from in-state suppliers cannot of the development of buying or manufacturing cooperatives that could create purchasing and sales/marketing leverage Secondary Wood Product Manufacturers Number of Employees by Establishment (Percent of respondent companies

306

Production of chemical feedstock by the methanolysis of wood  

DOE Patents (OSTI)

A process for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700.degree. C. to 1200.degree. C., at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

Steinberg, Meyer (Melville, NY); Fallon, Peter (East Moriches, NY)

1984-07-31T23:59:59.000Z

307

Wood pellet market and trade: a global perspective  

SciTech Connect

This perspective provides an overview of wood pellet markets in a number of countries of high significance, together with an inventory of market factors and relevant past or existing policies. In 2010, the estimated global wood pellet production and consumption were close to 14.3 Mt (million metric tonnes) and 13.5 Mt, respectively, while the global installed production capacity had reached over 28 Mt. Two types of pellets are mainly traded (i) for residential heating and (ii) for large-scale district heating or co-fi ring installations. The EU was the primary market, responsible for nearly 61% and 85% of global production and consumption, respectively in 2010. EU markets were divided according to end use: (i) residential and district heating, (ii) power plants driven market, (iii) mixed market, and (iv) export-driven countries. North America basically serves as an exporter, but also with signifi cant domestic consumption in USA. East Asia is predicted to become the second-largest consumer after the EU in the near future. The development perspective in Latin America remains unclear. Five factors that determine the market characteristics are: (i) the existence of coal-based power plants, (ii) the development of heating systems, (iii) feedstock availability, (iv) interactions with wood industry, and (v) logistics factor. Furthermore, intervention policies play a pivotal role in market development. The perspective of wood pellets industry was also analyzed from four major aspects: (i) supply potential, (ii) logistics issues, (iii) sustainability considerations, and (iv) technology development.

Chun Sheng Goh; Martin Junginger; Maurizio Cocchi; Didier Marchal; Daniela Thran; Christiane Hennig; Jussi Heinimo; Lars Nikolaisen; Peter-Paul Schouwenberg; Douglas Bradley; J. Richard Hess; Jacob J. Jacobson; Leslie Ovard; Michael Deutmeyer

2001-01-01T23:59:59.000Z

308

Environmental Impacts of Preservative-Treated Wood Conference  

E-Print Network (OSTI)

This article was written and prepared by U.S. Government employees on official time, For decades chromated copper arsenate (CCA) was the primary preservative for treated wood used in residential construction. However, recent label changes submitted by CCA registrants will withdraw CCA from most residential applications. This action has increased interest in arsenic-free preservative systems that have been standardized by the American Wood Preservers ’ Association. These include acid copper chromate (ACC), alkaline copper quat (ACQ), copper azole (CBA-A and CA-B), copper citrate (CC), copper dimethyldithiocarbamate (CDDC), and copper HDO (CX-A). All of these CCA alternatives rely on copper as their primary biocide, although some have co-biocides to help prevent attack by copper-tolerant fungi. They have appearance and handling properties similar to CCA and are likely to be readily accepted by consumers. Prior studies indicate that these CCA alternatives release preservative components into the environment at a rate greater than or equal to that of CCA, but because these components have lower mammalian toxicity they are less likely to cause concern in residential applications. As the treated wood industry evolves it is probable that a wider range of types and retentions of wood preservatives will become available, with the treatment more closely tailored to a specific type of construction application.

Stan Lebow

2004-01-01T23:59:59.000Z

309

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

; Vlosky 2002 #12;s The first MDF plant started up four years ago and now there are 3 or 4, so furniture for exotic wood veneer layup. Pressing veneer on MDF will give the most defect-free, flat and smooth surface

310

Scattering of Woods-Saxon Potential in Schrodinger Equation  

E-Print Network (OSTI)

The scattering solutions of the one-dimensional Schrodinger equation for the Woods-Saxon potential are obtained within the position-dependent mass formalism. The wave functions, transmission and reflection coefficients are calculated in terms of Heun's function. These results are also studied for the constant mass case in detail.

Altug Arda; Oktay Aydogdu; Ramazan Sever

2010-09-27T23:59:59.000Z

311

Mitigation for the Endangered Wood Stork on Savannah River Site  

DOE Green Energy (OSTI)

The wood stork is a recently classified federally endangered species. The species forages throughout the facility. The facility impact was mitigated by replacing the affected area with artificially created impoundment. Studies conducted in conjunction with the mitigation have assisted with the recovery effort for this species.

Bryan, A.L.; Coulter, M.C.; Brisbin, I.L.

2000-10-01T23:59:59.000Z

312

Development of polypropylene/wood flour ecocomposites. Evaluation of silane as coupling agent  

SciTech Connect

The effects of Pinus Sylvestris wood flour as filler in polypropylene matrix was evaluated. The mechanical properties and the morphology of different wood flour/polypropylene composites (WPC) were studied. The composites materials were prepared with several amounts of wood flour from 10 to 30% wt. Mechanical properties show that the wood flour incorporation increases the rigidity of the composites. Morphological analysis indicates that agglomerates are formed, with amounts exceeding 30% of wood flour. For the silane--treated composites, the dispersion of the filler into the polypropylene (PP) matrix improved. Shore D hardness of the composites is decreased with the addition of the coupling agent.

Bouza, R.; Barral, L.; Abad, M. J.; Montero, B. [Grupo de Polimeros, Dpto. de Fisica, E.U.P. Ferrol, Universidad de A Coruna, Avda. 19 de Febrero s/n, 15405 Ferrol (Spain)

2010-06-02T23:59:59.000Z

313

Technical and economic review of wood energy systems for military bases  

DOE Green Energy (OSTI)

This report combines two reports dealing with industrial-sized wood combustion technology. As part of its industrial wood combustion effort, SERI's former Industrial Applications and Analysis Branch (IAAB) contracted with the Air Force through the Department of Energy (DOE) to review wood fuels and equipment and to perform an economic sensitivity analysis of small-scale industrial-sized wood combustion investments that might be considered for steam and/or electricity generation at Air Force Bases. Additionally, in 1979, SERI's IAAB contracted with North Carolina State University to produce the Decision Makers' Guide to Wood Fuel for Small Industrial Energy Use. These two reports have been combined to provide the Air Force with a comprehensive guide to wood energy combustion. Discussion is presented under the headings: comparison of wood fuels with conventional boiler fuels; densified biomass; fuel storage; fuel handling and preparation; wood-fired equipment; gasification of wood; retrofitting fossil-fuel boilers; cogeneration; pollution abatement; wood energy system economics and procurement of wood fuels. (DMC)

Flowers, L.; Junge, D.; Levi, M.; O'Grady, M.

1983-06-01T23:59:59.000Z

314

How Much Wood Would a North Country School Chip | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How Much Wood Would a North Country School Chip How Much Wood Would a North Country School Chip How Much Wood Would a North Country School Chip November 3, 2011 - 11:19am Addthis This is the North Country School's 32,000-square-foot main building. Aligning with the school's commitment to a simple, sustainable lifestyle, the school is heated with a wood chip boiler that uses wood sourced from their sustainably managed woodlot and local forests. | Courtesy of North Country School This is the North Country School's 32,000-square-foot main building. Aligning with the school's commitment to a simple, sustainable lifestyle, the school is heated with a wood chip boiler that uses wood sourced from their sustainably managed woodlot and local forests. | Courtesy of North Country School Alice Dasek Project Officer, Department of Energy State Energy Program

315

How Much Wood Would a North Country School Chip | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How Much Wood Would a North Country School Chip How Much Wood Would a North Country School Chip How Much Wood Would a North Country School Chip November 3, 2011 - 11:19am Addthis This is the North Country School's 32,000-square-foot main building. Aligning with the school's commitment to a simple, sustainable lifestyle, the school is heated with a wood chip boiler that uses wood sourced from their sustainably managed woodlot and local forests. | Courtesy of North Country School This is the North Country School's 32,000-square-foot main building. Aligning with the school's commitment to a simple, sustainable lifestyle, the school is heated with a wood chip boiler that uses wood sourced from their sustainably managed woodlot and local forests. | Courtesy of North Country School Alice Dasek Project Officer, Department of Energy State Energy Program

316

URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILER PLANT  

DOE Green Energy (OSTI)

Phase I of this project began by obtaining R&D variances for permits at the NIOSH boilerplant (NBP), Emery Tree Service (ETS) and the J. A. Rutter Company (JARC) for their portions of the project. Wood for the test burn was obtained from the JARC inventory (pallets), Thompson Properties and Seven D Corporation (construction wood), and the Arlington Heights Housing Project (demolition wood). The wood was ground at ETS and JARC, delivered to the Three Rivers Terminal and blended with coal. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NBP. Blends using hammermilled wood were operationally successful. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and evaluated. During the first year of Phase II the principal work focused upon searching for a replacement boilerplant and developing a commercial supply of demolition wood. The NBP withdrew from the project and a search began for another stoker boilerplant in Pennsylvania to replace it on the project. Three potential commercial demolition wood providers were contacted. Two were not be able to supply wood. At the end of the first year of Phase II, discussions were continuing with the third one, a commercial demolition wood provider from northern New Jersey. During the two-and-a-third years of the contract extension it was determined that the demolition wood from northern New Jersey was impractical for use in Pittsburgh, in another power plant in central New Jersey, and in a new wood gasifier being planned in Philadelphia. However, the project team did identify sufficient wood from other sources for the gasifier project. The Principal Investigator of this project assisted a feasibility study of wood gasification in Clarion County, Pennsylvania. As a result of the study, an independent power producer in the county has initiated a small wood gasification project at its site. Throughout much of this total project the Principal Investigator has counseled two small businesses in developing a waxed cardboard pellet business. A recent test burn of this biofuel appears successful and a purchase contract is anticipated soon. During the past two months a major tree-trimming firm has shown an active interest in entering the wood-chip fuel market in the Pittsburgh area and has contacted the NBP, among others, as potential customers. The NBP superintendent is currently in discussion with the facilities management of the Bruceton Research Center about resuming their interest in cofiring this renewable fuel to the stoker there.

James T. Cobb Jr.

2005-02-10T23:59:59.000Z

317

Huntington Woods, Michigan: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Woods, Michigan: Energy Resources Woods, Michigan: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.4805913°, -83.1668713° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.4805913,"lon":-83.1668713,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

318

Wood-Ridge, New Jersey: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wood-Ridge, New Jersey: Energy Resources Wood-Ridge, New Jersey: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.8456555°, -74.0879195° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.8456555,"lon":-74.0879195,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

319

Meadow Woods, Florida: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Woods, Florida: Energy Resources Woods, Florida: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 28.3855632°, -81.366459° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":28.3855632,"lon":-81.366459,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

320

Mission Woods, Kansas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mission Woods, Kansas: Energy Resources Mission Woods, Kansas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.0350053°, -94.6085677° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0350053,"lon":-94.6085677,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

MEMORANDUM TO: F ROM: GREGORY H. WOODS GENERAL COUNSEL  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 4, 2013 February 4, 2013 MEMORANDUM TO: F ROM: GREGORY H. WOODS GENERAL COUNSEL CHRISTOPHER A.SMITH �|=K= ACTING ASSISTANT SECRETARY FOR FOSSIL ENERGY SUBJECT: Annual National Environmental Policy Act (NEPA) Planning Summaries for 2013 ISSUE: DOE Order 451.1B, Section 4.d, requires that an annual planning summary be prepared that briefly describes: {1) any Environmental Assessments (EAs) ongoing or expected to be

322

The morphological development of a wood burl shader  

E-Print Network (OSTI)

In the field of computer graphics, shaders provide an interface between lights and surfaces, giving the appearance of metal, plastic, wood, etc. As the field progresses, more and more shaders are required to simulate a wider and wider variety of materials. We present a new shader for the simulation of wood burl, a complex material used in furniture, art, car interiors, and a host of other luxury items. This shader was developed through a morphological approach - a study of the original material, its structure, and growth. Consequently, research began with a thorough look at wood burl, polished and unpolished, in an assortment of different species. We discovered the appearance can be broken into three sub-appearances - knots, curl, and a subtle undergrain. These three sub-appearances interact to create the characteristic swirls and whorls of burl. For the subtle undergrain, we used a common oak shader, added noise, and faded it into the background. We then developed a system of randomly placing points through the material to act as knots. Since the knots grow and distort the surrounding grain, we used distance-scaled forces to push the surface coordinates around and between all the knots. When the oak shader is applied, it appears to swirl and curl around the knots, much like a stream between rocks. This created the first level of curl or swirly grained wood, but one level alone appeared flat. To solve this, we procedurally blended levels of curl to give a look of increased depth. Finally, we added reflection, gloss, and other surface properties to give a look of warmth and polish. All of these properties are controlled by a set of parameters in the shader's interface. By adjusting these parameters, the user can emulate a variety of different burl types.

Moyer, Robert Simms

2003-12-01T23:59:59.000Z

323

Wood Gasification: Where It's At, Where It's Going  

E-Print Network (OSTI)

This paper discusses the principles and practice of various designs of biomass/wood gasifiers. In general, the basic principle of gasification is reviewed. A look at existing gasifier schemes, including packed bed updraft, downdraft, and fluidized bed, defines the basic characteristics of each and their advantages and di advantages. The economics of using one type of system - a fluid bed gasifier, on an oil fired boiler is presented to depict a representative, if not conservative, payback time for such an investment.

Murphy, M. L.

1981-01-01T23:59:59.000Z

324

Quality of Wood Pellets Produced in British Columbia for Export  

Science Conference Proceedings (OSTI)

Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

J. S. Tumuluru; S. Sokhansanj; C. J. Lim; T. Bi; A. Lau; S. Melin; T. Sowlati; E. Oveisi

2010-11-01T23:59:59.000Z

325

QUALITY OF WOOD PELLETS PRODUCED IN BRITISH COLUMBIA FOR EXPORT  

Science Conference Proceedings (OSTI)

Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

Tumuluru, J.S. [Idaho National Laboratory (INL); Sokhansanj, Shahabaddine [ORNL; Lim, C. Jim [University of British Columbia, Vancouver; Bi, X.T. [University of British Columbia, Vancouver; Lau, A.K. [University of British Columbia, Vancouver; Melin, Staffan [University of British Columbia, Vancouver; Oveisi, E. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver

2010-11-01T23:59:59.000Z

326

Report on Wood Pole and Crossarm Degradation Modes  

Science Conference Proceedings (OSTI)

This report covers the typical types of wood used in transmission line construction. The species can be categorized by their level of corrosion resistance, the type of preservative treatment that is appropriate and the type of decay that is predominant. This market has the benefit of experience and training gained through years of pole maintenance practices, research and the techniques that migrate directly to crossarm maintenance.

2009-12-23T23:59:59.000Z

327

Tectonic Setting of the Wooded Island Earthquake Swarm, Eastern Washington  

SciTech Connect

Magnetic anomalies provide insights into the tectonic implications of a swarm of ?1500 shallow (?1 km deep) earthquakes that occurred in 2009 on the Hanford site,Washington. Epicenters were concentrated in a 2 km2 area nearWooded Island in the Columbia River. The largest earthquake (M 3.0) had first motions consistent with slip on a northwest-striking reverse fault. The swarm was accompanied by 35 mm of vertical surface deformation, seen in satellite interferometry (InSAR), interpreted to be caused by ?50 mm of slip on a northwest-striking reverse fault and associated bedding-plane fault in the underlying Columbia River Basalt Group (CRBG). A magnetic anomaly over exposed CRBG at Yakima Ridge 40 km northwest of Wooded Island extends southeastward beyond the ridge to the Columbia River, suggesting that the Yakima Ridge anticline and its associated thrust fault extend southeastward in the subsurface. In map view, the concealed anticline passes through the earthquake swarm and lies parallel to reverse faults determined from first motions and InSAR data. A forward model of the magnetic anomaly near Wooded Island is consistent with uplift of concealed CRBG, with the top surface <200 m below the surface. The earthquake swarm and the thrust and bedding-plane faults modeled from interferometry all fall within the northeastern limb of the faulted anticline. Although fluids may be responsible for triggering the Wooded Island earthquake swarm, the seismic and aseismic deformation are consistent with regional-scale tectonic compression across the concealed Yakima Ridge anticline.

Blakely, Richard J.; Sherrod, Brian; Weaver, Craig; Rohay, Alan C.; Wells, Ray E.

2012-08-02T23:59:59.000Z

328

Best Practices for Biomass Handling in Wood Yard Operations  

Science Conference Proceedings (OSTI)

Utilities are beginning to add wood and other biomass fuels to fire their generating units to enable them to produce carbon-neutral electricity and participate in state or national renewable energy programs. However, because the material handling aspects of biomass differ from those of coal, firing at a significant scale requires new equipment to receive, store, and deliver the biomass to the flame front. This equipment is analogous in function to existing machinery but is quite different in detail, desi...

2011-08-29T23:59:59.000Z

329

Economics of modifying harvesting systems to recover energy wood  

SciTech Connect

Recent interest in the recovery of previously underutilized logging residues for energy has stimulated the development of a variety of technologies for bringing this resource to market. The most promising approach for the independent contractor working the south eastern United States is to incorporate residue recovery equipment into his existing harvesting system. Computer simulation was used to assess the potential impact of adding small chippers or residue balers to three common harvesting systems. The systems are used in pine plantations, and mixed pine hardwood and upland hardwood stands. Changes in both operating costs and capital used were used to measure the effect of moving from conventional products to total energy wood harvests and capturing residues for energy in conjunction with conventional products. Incremental analysis was used to assess the operating cost per ton and capitalization per ton of annual production associated with the addition of the residue recovery capability. In nearly every case the incremental cost per ton and the incremental capitalization per ton associated with adding capability (for recovering wood residues for energy) to conventional harvesting systems were considerably less than for establishing systems of the same configuration (to produce energy wood only). The flow of conventional products must not be interrupted by the residue recovery process. Clearcutting or thinning operations conducted primarily for the production of enery wood did not appear to be economical on any stand, given 1979 residue values, unless a proportion of the large diameter trees are merchandized as conventional products. This statement, of course, must take into account that the cost used for both conventional products and the full tree chips were based upon 1979 pulp chip prices. If the alternative value of this material as fuel rises above its current value for fiber, this situation may change.

Stuart, W.B.; Porter, C.D.; Walbridge, T.A.; Oderwald, R.G.

1981-08-01T23:59:59.000Z

330

Particulate matter emissions from combustion of wood in district heating applications  

Science Conference Proceedings (OSTI)

The utilization of wood biomass to generate district heat and power in communities that have access to this energy source is increasing. In this paper the effect of wood fuel properties, combustion condition, and flue gas cleaning system on variation in the amount and formation of particles in the flue gas of typical district heating wood boilers are discussed based on the literature survey. Direct measurements of particulate matter (PM) emissions from wood boilers with district heating applications are reviewed and presented. Finally, recommendations are given regarding the selection of wood fuel, combustion system condition, and flue gas cleaning system in district heating systems in order to meet stringent air quality standards. It is concluded that utilization of high quality wood fuel, such as wood pellets produced from natural, uncontaminated stem wood, would generate the least PM emissions compared to other wood fuel types. Particulate matter emissions from grate burners equipped with electrostatic precipitators when using wood pellets can be well below stringent regulatory emission limit such as particulate emission limit of Metro Vancouver, Canada.

Ghafghazi, S. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver; Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Melin, Staffan [Delta Research Corporation

2011-01-01T23:59:59.000Z

331

Low VOC drying of lumber and wood panel products. Progress report No. 7  

DOE Green Energy (OSTI)

Green pine blocks (2x1x 1) were dried to different moisture levels at 120 degrees C. They were immersed in D{sub 2}O (greater than 99% isotopic Content) for different periods at room temperature, and were then cut in halves. One piece from each set was then wrapped in plastic, and microwaved at 110 W, for 30 minutes, with the field being cycled to keep the wood surface at 90-100 degrees C. Fibers taken from just inside the wet surface from five regions along the length of the piece were then analysed by mass spectrometry with a direct insertion probe. The m/e profiles of the three isotopic forms of water, namely H{sub 2}O, HOD, and D{sub 2}O, remained unchanged as the wood was heated inside the spectrometer, indicating that they were bound equally strongly to the wood. The water released from the green wood had the same isotopic composition regardless of whether or not the wood was microwaved (Table 1), indicating that the exchangeable protons in wood were not affected by microwaving. However, as the wood progressively dried, the water released from the microwaved wood was of lower isotopic content, which means that microwaving increases access of the exchangeable protons in wood tissue to water. The only exchangeable protons in dried wood are those sited on hydroxyl groups, and the difference in isotopic exchange is the greatest for dried wood. This must mean that as wood dries, internal hydrogen bonding restricts access of D{sub 2}O to the hydroxyl protons. Presumably the energy transferred to water upon microwaving is sufficient to at least partially overcome this barrier. The effect is akin to the hysteresis that occurs for moisture sorption to green and dried wood. Similar isotope exchange work with D{sub 2}O has been previously conducted to determine the accessibility of cellulose to water.

Hui Yan; Hooda, Usha; Banerjee, Sujit [and others

1998-03-01T23:59:59.000Z

332

Water geochemistry of hydrothermal systems, Wood River District, Idaho  

DOE Green Energy (OSTI)

Hydrothermal systems of the Wood River District, central Idaho, have been studied by geologic mapping of thermal spring areas and geochemical investigations of thermal and non-thermal waters. This report summarizes the new geochemical data gathered during the study. Integration of the results of geological and geochemical studies has led to development of a target model for hydrothermal resources on the margin of the Idaho Batholith. Warfield Hot Springs, with temperatures up to 58/sup 0/C, flow from a major shear zone along the margin of an apophysis of the batholith. Hailey Hot Springs, with temperatures up to 60/sup 0/C, occur in an area of multiple thrust faults and newly recognized, closely spaced normal faults in the Paleozoic Milligen and Wood River Formations, 2.5 km from a highly brecciated batholith contact. Other Wood River district hydrothermal systems also occur along the margins of batholith apophyses or in adjacent highly fractured Paleozoic rocks, where there are indications of batholith rocks at shallow depths (100 to 300 m) in water wells.

Zeisloft, J.; Foley, D.; Blackett, R.

1983-08-01T23:59:59.000Z

333

Long-term lime pretreatment of poplar wood  

E-Print Network (OSTI)

Lignocellulosic biomass (e.g., poplar wood) provides a unique and sustainable resource for environmentally safe organic fuels and chemicals. The core of this study is the pretreatment step involved in bioconversion processes. Pretreatment is required to realize high yields vital to commercial success. The focus of the pretreatment step is to methodically change key features of the biomass to favor enzymatic hydrolysis. This work assesses the compositional changes due to oxidative and non-oxidative longterm lime pretreatment of poplar wood (up to 4 weeks of pretreatment) at mild temperatures (25ºC to 65ºC), and their effect on the enzymatic yield of glucan and xylan. The most important pretreatment yield of lignin was 54 g lignin remaining/100 g lignin in raw biomass, and was accomplished for 4-week lime pretreatment at 65ºC in oxidative conditions. The corresponding pretreatment yields of glucan and xylan were 85.9 g glucan recovered/100 g glucan in raw biomass and 80.2 g xylan recovered/100 g xylan in raw biomass respectively. For poplar wood oxidatively pretreated with lime for 4 weeks at 65ºC and enzymatically hydrolyzed with an enzyme loading of 15 FPU/g glucan in raw biomass during a 3-day period, the best overall yields of glucan and xylan, were 80.7 g glucan hydrolyzed/100 g glucan in raw biomass and 66.9 g xylan hydrolyzed/100 g xylan in raw biomass respectively. The corresponding hydrolysis yields were 94.0 g glucan hydrolyzed/100 g glucan in treated biomass and 83.5 g xylan hydrolyzed/100 g xylan in treated biomass respectively. Because there is a previous study of long-term lime pretreatment of corn stover (Kim, 2004), the data obtained in this work show the effect of using woody lignocellulose as substrate. From the comparison, resulted that in the case of poplar wood oxidatively pretreated at 65ºC for 4 weeks, less lignin was removed and more carbohydrates were solubilized, however the hydrolysis yield of glucan was almost equal and the hydrolysis yield of xylan was higher than the reported by Kim for corn stover oxidatively pretreated at 55ºC for 4 weeks. The overall yield of glucan resulted lower in the case of poplar wood because of the lower pretreatment yield of glucan. Thus, it is important to complete the mass balances including an analysis on the pretreatment liquor to determine if the solubilized glucan was degraded.

Sierra Ramirez, Rocio

2005-12-01T23:59:59.000Z

334

How I Learned to Stop Worrying and Love Professional Energy Assessment...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pgiam. BRRR...5 Ways to Maximize Your Fireplace and Chimney Efficiency A wood stove on a stone hearth. | Photo courtesy of iStockphotoKingLouie Wood and Pellet Heating...

335

Energy Efficiency Indicators Methodology Booklet  

E-Print Network (OSTI)

ground source) District heating Wood Biogas Charcoal Stove/wood and charcoal are widely used for cooking, water heating, andwood fuel to serve the basic need of cooking and water heating.

Sathaye, Jayant

2010-01-01T23:59:59.000Z

336

How I Learned to Stop Worrying and Love Professional Energy Assessment...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BRRR...5 Ways to Maximize Your Fireplace and Chimney Efficiency A wood stove on a stone hearth. | Photo courtesy of iStockphotoKingLouie Wood and Pellet Heating Energy Audits...

337

Chimneys: Warm and Cozy or Easy Exit for Your Heat? | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Your Fireplace and Chimney Efficiency Chimneys: Keep 'em Clean... and Closed A wood stove on a stone hearth. | Photo courtesy of iStockphotoKingLouie Wood and Pellet Heating...

338

Fuels for Schools Program Uses Leftover Wood to Warm Buildings | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuels for Schools Program Uses Leftover Wood to Warm Buildings Fuels for Schools Program Uses Leftover Wood to Warm Buildings Fuels for Schools Program Uses Leftover Wood to Warm Buildings May 10, 2010 - 1:11pm Addthis Darby Schools received a woodchip heating system in 2003. Rick Scheele, facilities manager for the Darby schools, shows off the wood firebox | Photo Courtesy USFS Fuels for Schools, Dave Atkins Darby Schools received a woodchip heating system in 2003. Rick Scheele, facilities manager for the Darby schools, shows off the wood firebox | Photo Courtesy USFS Fuels for Schools, Dave Atkins Stephen Graff Former Writer & editor for Energy Empowers, EERE In parts of this country, wood seems like the outsider in the biomass family. New ethanol plants that grind down millions of bushels of corn in the Midwest and breakthroughs in algae along the coasts always garner the

339

Expert Paper for the UNECE, Timber Committee Market Discussions, Geneva, 7-8 October 2003 1 Trends and Market Effects of Wood Energy Policies  

E-Print Network (OSTI)

is the future direction of electricity production from wood and co-firing of wood in coal power plants and pulp and paper production; ethanol and wood pellets projects have been more directed production from wood and co-firing of wood in coal power plants is the variable with the highest potential

340

Shell-armored wood cobbles as a potential criterion for detrital coal deposits  

Science Conference Proceedings (OSTI)

Shell-armored wood cobbles occur on detrital-peat beaches along the seaward edge of the Mississippi Delta. Shell material consists exclusively of Mulinia lateralis, a dwarf surf clam. Soft, heavy, waterlogged wood fragments are abraded and become armored by hard shells in response to wave activity on the beach. Although their preservation potential is suspect, fossilized shell-armored wood clasts would probably be recognized as a type of coal ball and might indicate an allochthonous origin for the host coal.

DiMarco, M.J.; Nummedal, D.

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Fire safety for your wood-burning appliance: tips for proper installation, operation, and maintenance  

Science Conference Proceedings (OSTI)

A dramatic increase in house fires caused by wood-burning appliances has accompanied the rediscovery of wood as an alternative heating fuel. The National Bureau of Standards attributed the majority of these fires to conditions related to the installation, operation or maintenance of the appliances rather than malfunctions or construction defects. This publication presents guidelines for the proper installation, use, and maintenance of wood-burning appliances in the home. (DMC)

Not Available

1984-01-01T23:59:59.000Z

342

Options for Prevention, Mitigation, and Remediation at Wood Poles Storage Sites  

Science Conference Proceedings (OSTI)

As part of the maintenance of the electrical transmission and distribution networks in the United States, electric utilities store treated wood poles and cross arms at storage facilities. During this storage, chemicals of concern (COCs) used in preservative formulations can drip and leach during precipitation events from the treated wood poles and cross arms, potentially impacting site soils, groundwater, and nearby surface water bodies. These COCs will vary depending on the types of treated wood stored ...

2006-03-06T23:59:59.000Z

343

Chemical Pretreatment And Enzymatic Hydrolysis Of Mixed Source-Separated Organic (SSO) And Wood Waste.  

E-Print Network (OSTI)

??This paper examines the effectiveness of two pretreatments on Source-Separated Organic waste (SSO) mixed with wood wastes: long term lime for SSO mixed with forestry… (more)

Faye, Michael

2010-01-01T23:59:59.000Z

344

Modelling of mass transfer during wood fermentation processes to produce bioalcohol.  

E-Print Network (OSTI)

??The aim of this work is to model the bioethanol production by wood degradation, and to check if there is mass transfer limitations in the… (more)

Spalluto, Giorgio

2011-01-01T23:59:59.000Z

345

Microsoft Word - CX-CowlitzTaptoChehalis-CovingtonWoodPoles_WEB...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8, 2011 REPLY TO ATTN OF: KEPR-Covington SUBJECT: Environmental Clearance Memorandum Clay Grande Line Foreman III - TFCF-Covington Proposed Action: Wood pole replacement at...

346

Development of a Financial Model for Wood Pellet Production Costs in New England.  

E-Print Network (OSTI)

??The wood fuel pellet industry has been growing rapidly in recent years. The conversion of a significant proportion of central home heating systems in the… (more)

Lu, Ning

2012-01-01T23:59:59.000Z

347

Wood compost process engineering, properties and its impact on extreme soil characteristics.  

E-Print Network (OSTI)

??The landfilling of biodegradable waste is proven to contribute to environmental degradation. Much wood and lumber is discharged as waste from the cleared fields. These… (more)

Nada, Wael Mohamed Abdel-Rahman

2011-01-01T23:59:59.000Z

348

Planning and setup for the implementation of coal and wood co-fired boilers.  

E-Print Network (OSTI)

??Coal and wood co-fired boiler technology has been significantly advancing in the past years, but many of their capabilities remain unknown to much of the… (more)

Gump, Christopher D.

2007-01-01T23:59:59.000Z

349

Finding the light out of Into the Woods : a lighting design.  

E-Print Network (OSTI)

??Designing the lighting for any major theatrical production is comparable to one's own adventure through the woods. From pre-production to finalized design this thesis project… (more)

Groskopf, Kelli Jean

2012-01-01T23:59:59.000Z

350

Techno-economic analysis of wood biomass boilers for the greenhouse industry  

SciTech Connect

The objective of this study is to perform a techno-economic analysis on a typical wood pellet and wood residue boiler for generation of heat to an average-sized greenhouse in British Columbia. The variables analyzed included greenhouse size and structure, boiler efficiency, fuel types, and source of carbon dioxide (CO2) for crop fertilization. The net present value (NPV) show that installing a wood pellet or a wood residue boiler to provide 40% of the annual heat demand is more economical than using a natural gas boiler to provide all the heat at a discount rate of 10%. For an assumed lifespan of 25 years, a wood pellet boiler system could generate NPV of C$259,311 without electrostatic precipitator (ESP) and C$74,695 with ESP, respectively. While, installing a wood residue boiler with or without an ESP could provide NPV of C$919,922 or C$1,104,538, respectively. Using a wood biomass boiler could also eliminate over 3000 tonne CO2 equivalents of greenhouse gases annually. Wood biomass combustion generates more particulate matters than natural gas combustion. However, an advanced emission control system could significantly reduce particulate matters emission from wood biomass combustion which would bring the particulate emission to a relatively similar level as for natural gas.

Chau, J. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver; Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Preto, F. [Natural Resources Canada; Melin, Staffan [University of British Columbia, Vancouver

2009-01-01T23:59:59.000Z

351

Issues in the use of wood as an energy source in the northeastern US  

DOE Green Energy (OSTI)

This report analyzes some of the concerns surrounding the use of wood for energy in the Northeast. It reviews the information on resource availability and ownership patterns in the Northeast, then focuses on New England, to assess the affect of potential resource constraints on the supply of wood available for energy and the effects of wood energy use on land use patterns. Finally, the application of specific technologies in settings that may experience significant wood energy use in the future is considered, including an assessment of the regional employment and income benefits of a major woodfuel installation.

Munson, J.S. (ed.)

1980-05-01T23:59:59.000Z

352

Rapid determination of wood fuel moisture content using a microwave oven for drying  

SciTech Connect

A method of determining moisture content (MC) of wood fuel using a microwave oven for drying the wood was evaluated by drying paired samples of five different wood fuel types in a microwave oven and a conventional oven. When compared to the conventional oven drying method, the microwave technique produces consistently lower MC determinations, although the differences are less than 1 percent. The advantage of the microwave technique is the speed at which MC determinations can be determined (less than 15 minutes). Schedules for drying five wood fuel types are presented. (Refs. 7).

Harris, R.A.

1982-10-01T23:59:59.000Z

353

Riparian forest disturbances by a mountain flood -- the influence of floated wood  

E-Print Network (OSTI)

Large floods can have major impacts on riparian forests. Here we examine the variability and spatial distribution of riparian forest responses along eight third- to fifth-order streams following a large flood ( 100 year recurrence interval) in the Cascade Mountain Range of Oregon. We categorized disturbance intensity (physical force) exerted on riparian trees during floods into three classes: (i) purely fluvial (high water flow only); (ii) ¯uvial supplemented by dispersed pieces of floating wood (uncongested wood transport); (iii) fluvial with movement of batches of wood (congested wood transport). These types of material transport and associated classes of disturbance intensity resulted in a gradient of biotic responses of disturbance severity ranging from standing riparian trees inundated by high water, to trees toppled but still partially rooted, to complete removal of trees. High within-stream and among stream responses were inflenced by pre-flood stream and riparian conditions as well as flood dynamics, especially the availability of individual pieces or congested batches of wood. Fluvial disturbance alone toppled fewer riparian trees than in reaches where floodwaters transported substantial amounts of wood. Debris flows delivered additional wood and sediment to parts of reaches of four of these study streams; riparian trees were removed and toppled for up to 1 5 km downstream of the debris flow tributary channel. Congested wood transport resulted in higher frequency of toppled trees and greater deposition of new wood levees along channel margins. The condition of the landscape at the time of a major ¯ood strongly influenced

Sherri L. Johnson; Frederick J. Swanson; Gordon E. Grant; Steven M. Wondzell

2000-01-01T23:59:59.000Z

354

Water-Activated, Shape Memory Twist Effect in Wood Slivers as an ...  

Science Conference Proceedings (OSTI)

This shape memory twist effect in wood could inspire new smart materials for a wide range of applications, including sensors, actuators, biomedical devices, and

355

Microsoft Word - CX-BigEddy-RedmondWoodPoles_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacements at select locations along the Big Eddy-Redmond and Redmond-Pilot...

356

Transcriptome and Biochemical Analyses of Fungal Degradation of Wood  

SciTech Connect

Lignocellulosic accounts for a large percentage of material that can be utilized for biofuels. The most costly part of lignocellulosic material processing is the initial hydrolysis of the wood which is needed to circumvent the lignin barrier and the crystallinity of cellulose. Enzymes will play an increased role in this conversion in that they potentially provide an alternative to costly and caustic high temperature and acid treatment. The increasing use of enzymes in biotechnology is facilitated by both continued improvements in enzyme technology but also in the discovery of new and novel enzymes. The present proposal is aimed at identifying the enzymes which are known to depolymerize woody biomass. Fundamental understanding of how nature gains access to cellulose and hemicellulose will impact all applications. Because fungi are the only known microbes capable of circumventing the lignin barrier, knowledge of the enzyme they use is of great potential for biofuel processing. Nature has evolved different fungal mechanisms for enzymatic hydrolysis of wood. Most notable are the white-rot fungi (wrf) and the brown-rot fungi (brf). This proposed research aims at determining the complete transcriptome of three wrf and two brf to determine the enzymes involved in lignocellulose degradation. The transcriptome work will be supported by enzyme characterization (and zymograms) and finally analysis of the lignin component to determine the mode of lignin modification. In this proposed research, we hypothesize that: 1) Determination of the complete transcriptome of closely related white and brown rot fungi will lead to knowledge of the relevant enzymes involved in wood degradation. 2) Knowledge of the extracellular transcriptome and the mechanism of wood decay can only be obtained if the products of the decay are known. As such, characterization of the lignin oxidation products will correlate the enzymes involved (obtained from the transcriptome) to the lignin oxidation products. The Department of Energy has sequenced the P. chrysosporium genome and has approved the sequencing of the genome of the closely-related brown rot fungus P. placenta. This comparative genomics approach will yield important information on differences between these two fungi. Analysis of gene unique to each fungus (which have been lost or gained) can potentially lead to determining the enzymes which are responsible for each type of decay. This comparison, however, would not be complete without comparing the transcriptome and the proteome/enzymes. Comparative genomics may tell us which genes may be important, but it will not tell us when these genes are expressed, at what levels and will not necessarily tell us what these genes do.

Tien, Ming

2009-03-14T23:59:59.000Z

357

Wood-Coal Fired "Small" Boiler Case Study  

E-Print Network (OSTI)

Galaxy Carpet Corporation installed a coal and wood waste fired boiler approximately twelve months ago. Its first year net savings were $195,000.00 Total capital investment was paid off in 1.9 years. 20% investment tax credits were granted by the Federal Government. Galaxy Carpet Corporation has been sufficiently impressed with performance, both economically and technically, to place a follow-up order of $1,500,000.00 for a second solid fuel fired boiler system at its Dalton, Georgia Dye House operation.

Pincelli, R. D.

1980-01-01T23:59:59.000Z

358

Urban Wood-Based Bio-Energy Systems in Seattle  

DOE Green Energy (OSTI)

d.\tFuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e.\tIntegrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Stan Gent, Seattle Steam Company

2010-10-25T23:59:59.000Z

359

Making Steel Framing as Thermally Efficient as Wood  

E-Print Network (OSTI)

In many world regions like North America and Scandinavia wood framing is dominant technology for residential buildings. During last two decades several companies around the world started to promote a low-gage steel framing for residential and commercial buildings. Steel framing has many advantages over wood framing; strength, low weight, dimensional stability, resistance to termite damage, almost 100% recycleability, etc .. However because of several reasons an application of steel as a framing material in US residential building market is relatively low. Steel industry has noticed much more success on commercial building market which is not as rigorous regarding thermal efficiency and energy conservation. Steel framing has one significant disadvantage over wood; Steel members conduct heat extremely well. This effect is known as thermal bridging, and it can sharply reduce a wall's effective Rvalue. The simplest and most common way to overcome this problem is to block the path of heat flow with rigid foam insulation. Adding rigid foam insulation not only increases the whole wall's R-value, but it also reduces the temperature difference between the center of the cavity and the stud area, which cuts down on the possibility of black stains forming from dirt getting asymmetrically attracted to cold spots on a wall's surface. However, rigid foam insulation is an expensive solution. Several material configurations were developed in the past to increase thermal effectiveness of steel-framed structures. This paper is focused on most common options of thermal improvements of steels framed walls. They were as follow: 1) diminishing the contact area between the studs and exterior sheathing materials, 2) reducing the steel stud web area, 3) replacing the steel web with a less conductive material, and 4) placing foam insulation in locations where the thermal shorts are most critical. Researchers at Oak Ridge National Laboratory (ORNL) have utilized both hot box testing and computer simulations in aim to optimize thermal design of steel stud walls.. While examining several material options, ORNL's BTC was also striving to develop energy-efficient steel stud wall technologies that would enable steel-stud walls to beat the performance of traditional 2 x 6 wood stud walls. Several, most current, ORNL developments in steel framing are presented below.

Kosny, J.; Childs, P.

2002-01-01T23:59:59.000Z

360

Paycheck Deduction Codes 01/10 Deduct Code Description  

E-Print Network (OSTI)

Garnishment GFNOPROV GF Mand Ret-No Providor Chosen GFTSAING GF - TSA ING GFTSALINC GF - TSA Lincoln GFTSASEC

Peterson, Blake R.

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Environmental Influences on Wood Chemistry and Density of Populus and Loblolly Pine  

DOE Green Energy (OSTI)

The objectives of the study are to: (1) determine the degree to which physical and chemical wood properties vary in association with environmental and silvicultural practices in Populus and loblolly pine and (2) develop and verify species-specific empirical models in an effort to create a framework for understanding environmental influences on wood quality.

Tuskan, G.A.

2006-08-11T23:59:59.000Z

362

THE ROLE OF DEAD WOOD IN MAINTAINING ARTHROPOD DIVERSITY ON THE FOREST FLOOR.  

Science Conference Proceedings (OSTI)

Abstract—Dead wood is a major component of forests and contributes to overall diversity, primarily by supporting insects that feed directly on or in it. Further, a variety of organisms benefit by feeding on those insects. What is not well known is how or whether dead wood influences the composition of the arthropod community that is not solely dependent on it as a food resource, or whether woody debris influences prey available to generalist predators. One group likely to be affected by dead wood is ground-dwelling arthropods. We studied the effect of adding large dead wood to unburned and frequently burned pine stands to determine if dead wood was used more when the litter and understory plant community are removed. We also studied the effect of annual removal of dead wood from large (10-ha) plots over a 5-year period on ground-dwelling arthropods. In related studies, we examined the relationships among an endangered woodpecker that forages for prey on live trees, its prey, and dead wood in the forest. The results of these and other studies show that dead wood can influence the abundance and diversity of the ground-dwelling arthropod community and of prey available to generalist predators not foraging directly on dead trees.

Hanula, James L.; Horn, Scott; Wade, Dale D.

2006-08-01T23:59:59.000Z

363

Numerical and experimental validation of heat and mass transfer during heat treatment of wood  

Science Conference Proceedings (OSTI)

In the current work, the three-dimensional Navier-Stokes equations along with the energy and concentration equations for the fluid coupled with the energy and mass conservation equations for the solid (wood) are solved to study the transient heat and ... Keywords: Luikov's model, conjugate problem, heat and mass transfer, high-temperature wood treatment, mathematical modeling, validation

R. Younsi; D. Kocaefe; S. Poncsak; T. Junjun

2007-05-01T23:59:59.000Z

364

National Woodfuels and Wood Energy Information Analysis Prepared by: Sok Bun Heng  

E-Print Network (OSTI)

supplies. - 90 % of wood energy is consumed by households. - Industry is only a very small consumer of wood % Charcoal 1.2 %, other biomass 1.7 % and imported petroleum product. The most recent national energy supply balance indicates traditional fuels contribute 85 % of the national energy supply, of which 80

365

Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA  

E-Print Network (OSTI)

Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA Submitted to Dr. Bi By Bernard Chan Pellets for UBC Boilers Replacing Natural Gas" By Bernard Chan, Brian Chan, and Christopher Young Abstract This report studies the feasibility of replacing natural gas with wood pellets for UBC boilers. A gasification

366

Design of an automatic wood types classification system by using fluorescence spectra  

Science Conference Proceedings (OSTI)

The classification of wood types is needed in many industrial sectors, since it can provide relevant information concerning the features and characteristics of the final product (appearance, cost,mechanical properties, etc.). This analysis is typical ... Keywords: automatic spectra analysis, automatic wood classification, computational intelligence

Vincenzo Piuri; Fabio Scotti

2010-05-01T23:59:59.000Z

367

Relationships between dead wood and arthropods in the Southeastern United States.  

SciTech Connect

The importance of dead wood to maintaining forest diversity is now widely recognized. However, the habitat associations and sensitivities of many species associated with dead wood remain unknown, making it difficult to develop conservation plans for managed forests. The purpose of this research, conducted on the upper coastal plain of South Carolina, was to better understand the relationships between dead wood and arthropods in the southeastern United States. In a comparison of forest types, more beetle species emerged from logs collected in upland pine-dominated stands than in bottomland hardwood forests. This difference was most pronounced for Quercus nigra L., a species of tree uncommon in upland forests. In a comparison of wood postures, more beetle species emerged from logs than from snags, but a number of species appear to be dependent on snags including several canopy specialists. In a study of saproxylic beetle succession, species richness peaked within the first year of death and declined steadily thereafter. However, a number of species appear to be dependent on highly decayed logs, underscoring the importance of protecting wood at all stages of decay. In a study comparing litter-dwelling arthropod abundance at different distances from dead wood, arthropods were more abundant near dead wood than away from it. In another study, grounddwelling arthropods and saproxylic beetles were little affected by large-scale manipulations of dead wood in upland pine-dominated forests, possibly due to the suitability of the forests surrounding the plots.

Ulyshen, Michael, Darragh

2009-05-01T23:59:59.000Z

368

Characterization and explanation of the sustainability of the European wood manufacturing industries: A quantitative approach  

Science Conference Proceedings (OSTI)

This paper has a twofold purpose. First, to characterize the sustainability of the European wood manufacturing industry. In this way, a ranking of the European countries analyzed in terms of sustainability is established. To undertake this task the sustainability ... Keywords: Econometric models, Goal programming, Indicators, Sustainability, Wood manufacturing industry

Roberto Voces; Luis Diaz-Balteiro; Carlos Romero

2012-06-01T23:59:59.000Z

369

Creosote-Treated Wood Poles and Crossarms: Toxicity Characteristic Leaching Procedure (TCLP) Results  

Science Conference Proceedings (OSTI)

If creosote-treated wood poles and crossarms are classified as hazardous waste by the EPA's revised toxicity characteristic rule, disposal costs will rise dramatically. However, when the rule is applied to data obtained from this EPRI study, creosote-treated utility wood poles and crossarms receive a nonhazardous classification.

1992-08-06T23:59:59.000Z

370

Pentachlorophenol (PCP)-Treated Wood Poles and Crossarms: Toxicity Characteristic Leaching Procedure (TCLP) Results  

Science Conference Proceedings (OSTI)

If pentachlorophenol (PCP)-treated wood poles and crossarms are classified as hazardous waste by the revised toxicity characteristic (TC) rule, disposal costs will rise dramatically. However, when the ruling is applied to data obtained during this study, PCP-treated utility wood poles and crossarms receive a nonhazardous classification.

1991-01-03T23:59:59.000Z

371

Seismic design of a current woodframe structure and study of innovative products and damping systems in wood construction  

E-Print Network (OSTI)

Wood structures have seen resurgence in popularity over the past several decades, especially in Western States of America, such as California. The industry keeps creating new structural wood products of exceptional strength, ...

Mahjoub, Nina A. (Nina Azadeh)

2007-01-01T23:59:59.000Z

372

URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILERPLANT  

DOE Green Energy (OSTI)

During the third quarter, the experimental portion of the project was carried out. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NIOSH Boiler Plant (NBP). Blends using hammer-milled wood were operationally successful and can form the basis of Phase II. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and the mathematical modeling of mercury speciation reactions continued, yielding many interesting results. Material and energy balances for the test periods at the NBP, as well as at the Bellefield Boiler Plant, were prepared. Steps were taken to remove severe constraints from the Pennsylvania Switchgrass Energy and Conservation Project and to organize the supplying of landfill gas to the Bruceton federal complex. Two presentations were made to meetings of the Electric Power Research Institute and the National Energy Technology Laboratory.

James T. Cobb, Jr.; Gene E. Geiger; William W. Elder III; Thomas Stickle; Jun Wang; Hongming Li; William P. Barry

2002-06-13T23:59:59.000Z

373

Terrestrial laser scanning for measuring the solid wood volume, including branches, of adult standing trees in the forest environment  

Science Conference Proceedings (OSTI)

This study evaluates the potential of terrestrial laser scanning (TLS) to assess the solid wood volume (i.e., stem and branch diameters of more than 7cm) of adult standing trees in the forest environment. The solid wood volume of 42 trees of different ... Keywords: 3D tree modelling, Forestry, LiDAR, Terrestrial laser scanning, Wood volume

Mathieu Dassot; AuréLie Colin; Philippe Santenoise; Meriem Fournier; ThiéRy Constant

2012-11-01T23:59:59.000Z

374

Woodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011  

E-Print Network (OSTI)

Recycled fibre Energy crops, forest residues and tree stumps The first reports on wood fuel usage data hadWoodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011 Woodfuel Demand and Usage in Scotland Report 2011 #12;Woodfuel Usage Update 2 I Wood fuel use in Scotland

375

Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies  

DOE Green Energy (OSTI)

This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

Auburn Machinery, Inc.

2004-07-15T23:59:59.000Z

376

Superheater Tube Corrosion in Wood Gasifier Ash Deposits  

DOE Green Energy (OSTI)

The upper operating temperature of tubes in heat exchangers/steam generators is strongly influenced by the degradation that can occur because of the reaction of the exchanger/generator tubing with the deposits that accumulate on the surface of the tubes. In fact, severe corrosion has been observed in some biomass fired systems, particularly with elevated potassium and chlorine concentrations in the deposits. Wood gasifiers have recently been and are currently being constructed at several sites in North America. In these systems, the syngas is burned to produce steam and the performance of the heat exchanger tubes under ash deposits is of great concern. As temperatures of the heat exchangers are increased in an effort to increase their operating efficiency, the performance of the tubes is of greater interest. The corrosion behavior of alloy steel tubes as a function of temperature has been investigated by exposing samples of selected alloys to ash collected from the steam generator fired by syngas produced in wood gasifiers. This study compares corrosion rates from laboratory exposures of synthesis gas and ash at 500 C and 600 C. This study investigated the material performance of four ferritic steels and one austenitic steel exposed to conditions expected on the fireside of a wood gasifier. The purpose of this study was to identify an effective method for determining material performance for samples exposed to both the process gas and the fly ash that is typically observed within the steam generator for times up to 1000 hours. Mass changes were measured for all of the samples, but this information can be misleading concerning material performance due to the difficulty in sufficiently cleaning the samples after exposure in the ash. Therefore, small cross sections of the samples were collected and imaged using optical microscopy. Oxide thicknesses were measured along with metal losses. The metal loss information provides a clear indication of material performance. The metal loss rates for the ferritic steels at 500 C were almost half of those observed at 600 C and the rates decreased with increasing exposure time. It was also reported that the metal loss rates generally decrease with increasing chromium concentration.

Bestor, Michael A [ORNL; Keiser, James R [ORNL; Meisner, Roberta A [University of Tennessee, Knoxville (UTK) & Oak Ridge National Laboratory (ORNL)

2011-01-01T23:59:59.000Z

377

Warren T. Wood, L. Dale Bibee, Edward F. Braithwaite Introduction  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment of a Deep-water Seafloor Sound Source Deployment of a Deep-water Seafloor Sound Source Warren T. Wood, L. Dale Bibee, Edward F. Braithwaite Introduction With funding from DOE-NETL, the Naval Research Laboratory's deep-towed acoustic geophysics system (DTAGS) was outfitted to be set directly on the seafloor with the intent of more efficiently generating shear wave energy in the seafloor. We altered the existing DTAGS by adding a releasable landing shoe, and a geophone array that used existing data telemetry. The modified system was deployed in March of 2010 in about 900m of water near the site of the University of Mississippi's gas hydrate observatory in lease block

378

Environmental-performance research priorities: Wood products. Final report  

Science Conference Proceedings (OSTI)

This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

NONE

1998-01-15T23:59:59.000Z

379

The Honorable John T. 'Gregorio 301 N. Wood Avenue  

Office of Legacy Management (LM)

Eiergy ; Eiergy ; Washington, DC 20585 -, (, > - .' c ' . FEB 1 7 1995 _ .; , _-, The Honorable John T. 'Gregorio 301 N. Wood Avenue Linden, 'New Jersey 07036 d. \ Dear Mayor Gregorio: ,' ,' .' , Secretary of Energy Hazel O'Leary has announced a new approach to openness, in the'llepartment' of Energy (DDE) and its co,annunications with the .public.', In sup~port of this initiative, we are.pleased to forward.the,enclosed information reiated to the.former Linden Pilot Plant of the Chemical' Construction Company in your jurisdiction that performed work for DOE's.predecessor agencies. This information is provided for your information, use,.and reten,tion. '. , / DOE's Formerly Utilized Sites Remedial Action Program is responsible for identification of sites used by DOE's predecessor agencies, determining their

380

Water Sampling At International Geothermal Area, Philippines (Wood, 2002) |  

Open Energy Info (EERE)

Water Sampling At International Geothermal Area Water Sampling At International Geothermal Area Philippines (Wood, 2002) Exploration Activity Details Location International Geothermal Area Philippines Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the Salton Sea and Heber geothermal fields of southern California; and 7) the

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Microsoft Word - CX-Murray-CusterWoodPoles_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Covington Covington SUBJECT: Environmental Clearance Memorandum Steve Scott Line Foreman III - TFNF-Snohomish Proposed Action: Wood pole replacement at selected locations along the Murray-Custer #1 transmission line right-of-way (ROW). PP&A Project No.: 1963 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective...are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designed purpose. Location: The proposed project is located in Snohomish and Skagit Counties, Washington, in Bonneville Power Administration's (BPA) Snohomish District.

382

Compound and Elemental Analysis At Breitenbush Hot Springs Area (Wood,  

Open Energy Info (EERE)

2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Breitenbush Hot Springs Area (Wood, 2002) Exploration Activity Details Location Breitenbush Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

383

Synthesis of SiC nanorods from bleached wood pulp  

DOE Green Energy (OSTI)

Unbleached and bleached soft wood pulps have been used as templates and carbon precursors to produce SiC nanorods. Hydrolyzed tetraethylorthosilicate (TEOS), Silicic acid was infiltrated into the pulps followed by a carbothermal reduction to form SiC nanorods at 1400oC in Ar. Residual carbon formed along with SiC was removed by gasification at 700oC in air. The SiC materials prepared from unbleached pulp were non-uniform SiC with a thick SiO2 coating, while the SiC nanorods prepared from the bleached pulp were uniform and straight with dimensions of 250 nm in diameter and 5.0 mm long. The formation of uniform camelback structure of SiC in the reaction between silica and bleached pulp is attributed to more silica deposited in the amorphous region of cellulose.

Shin, Yongsoon; Wang, Chong M.; Samuels, William D.; Exarhos, Gregory J.

2007-05-01T23:59:59.000Z

384

Fusion-fission reactions with modified Woods-Saxon potential  

E-Print Network (OSTI)

A modified Woods-Saxon potential model is proposed for a unified description of the entrance channel fusion barrier and the fission barrier of fusion-fission reactions based on the Skyrme energy-density functional approach. The fusion excitation functions of 120 reactions have been systematically studied. The fusion (capture) cross sections are well described with the calculated potential and an empirical barrier distribution. Incorporating a statistical model (HIVAP code) for describing the decay of the compound nucleus, the evaporation residue (and fission) cross sections of 51 fusion-fission reactions have been systematically investigated. Optimal values of some key parameters of the HIVAP code are obtained based on the experimental data of these reactions. The experimental data are reasonably well reproduced by the calculated results. The upper and lower confidence limits of the systematic errors of the calculated results are given.

Ning Wang; Kai Zhao; Werner Scheid; Xizhen Wu

2007-12-15T23:59:59.000Z

385

Kinetic Modeling and Assessment of Lime Pretreatment of Poplar Wood  

E-Print Network (OSTI)

Because of widespread availability, low cost, sustainability, and potential supply far greater than that of food crops, lignocellulosic biomass is one of the most promising feedstocks for producing biofuels through fermentation processes. Among lignocellulose choices, poplar wood is appealing because of high energy potential, above-average carbon mitigation potential, fast growth, and high yields. Lignocellulose structural features limit accessibility of enzymes or microorganisms. To overcome these limitations, pretreatment is required. Among several choices of pretreatment, lime pretreatment is preferred because lime is the cheapest alkali, safest to handle, easy to recover, and compatible with oxidants. The main effect of lime pretreatment is to degrade lignin, which occurs with good carbohydrate preservation and is enhanced with oxidants. Among several choices of oxidant, oxygen and air are preferred because of low cost and widespread availability. This study systematically assesses the effects of lime pretreatment on poplar wood using four different modes: long-term oxidative, long-term non-oxidative, short-term constant pressure, and short-term varying pressure. Long-term pretreatments use temperatures between 25 and 65° C, air if oxidant is used, and last several weeks. Short-term pretreatments use temperatures between 110 and 180° C, pressurized oxygen, and last several minutes to hours. Pretreatment was assessed on the basis of 3-day enzymatic digestibility using enzyme loadings of 15 FPU/g glucan in raw biomass. The results were used to recommend pretreatment conditions based on highest overall yield of glucan (after combined pretreatment and enzymatic hydrolysis) for each pretreatment mode. For each pretreatment mode, kinetic models for delignification and carbohydrates degradation were obtained and used to determine the conditions (temperature, pressure, and time) that maximize glucan preservation subjected to a target lignin yield. This study led to conclude that the most robust, and selective mode of lime pretreatment is varying pressure.

Sierra Ramirez, Rocio

2010-12-01T23:59:59.000Z

386

Urban Wood-Based Bio-Energy Systems in Seattle  

SciTech Connect

Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Stan Gent, Seattle Steam Company

2010-10-25T23:59:59.000Z

387

Air emissions from residential heating: The wood heating option put into environmental perspective. Report for June 1997--July 1998  

SciTech Connect

The paper compares the national scale (rather than local) air quality impacts of the various residential space heating options. Specifically, it compares the relative contributions of the space heating options to fine particulate emissions, greenhouse gas emissions, and acid precipitation impacts. The major space heating energy options are natural gas, fuel oil, kerosene, liquefied petroleum gas (LPG), electricity, coal, and wood. Residential wood combustion (RWC) meets 9% of the Nation`s space heating energy needs and utilizes a renewable resource. Wood is burned regularly in about 30 million homes. Residential wood combustion is often perceived as environmentally dirty due to emissions from older wood burners.

Houck, J.E.; Tiegs, P.E.; McCrillis, R.C.; Keithley, C.; Crouch, J.

1998-12-31T23:59:59.000Z

388

Economic impacts of wood energy in the Northeast, 1985: Summary report: Northeast Regional Biomass Program  

DOE Green Energy (OSTI)

Wood energy in the Northeast accounts for an estimated average of 1.96 jobs and $46,634 of income for every 1000 tons of wood burned by households and businesses. This translates into an estimated total of over 78,000 jobs and $1.8 billion of personal income for Northeast residents and businesses. In addition, a total of $589 million in state and federal tax revenues are generated by wood energy-related economic activity. By choosing wood over other fuels, Northeast households and businesses saved $1.2 billion in their 1985 fuel bills. In the Northeast in 1985, wood displaced over 1 billion gallons of oil, 37 million tcf of natural gas and propane, 138,000 tons of coal, and 1858 million kilowatt-hours of electricity. Projected growth in wood energy consumption in the industrial and residential sectors indicate that the Northeast wood energy industry will support approximately 165,000 jobs and $3.8 billion of personal and business income by the year 2000, if projected growth continues. 9 figs., 5 tabs.

Chamberlin, R.; High, C.

1986-04-01T23:59:59.000Z

389

PSNH's Northern Wood power project repowers coal-fired plant with new fluidized-bed combustor  

SciTech Connect

The Northern Wood Power project permanently replaced a 50-MW coal-burning boiler (Unit 5) at Public Service of New Hampshire's Schiller station with a state-of-the-art circulating fluidized bed wood-burning boiler of the same capacity. The project, completed in December 2006, reduced emissions and expanded the local market for low-grade wood. For planning and executing the multiyear, $75 million project at no cost to its ratepayers, PSNH wins Power's 2007 Marmaduke Award for excellence in O & M. The award is named for Marmaduke Surfaceblow, the fictional marine engineer/plant troubleshoot par excellence. 7 figs., 1 tab.

Peltier, R.

2007-08-15T23:59:59.000Z

390

Continuous On-Line Measurement of Lignin Concentration in Wood Pulp  

E-Print Network (OSTI)

We are working toward the development of an instrument for the continuous, on-line measurement of the lignin concentration in wood pulp. The instrument is based on laser induced fluorescence of the wood pulp and is to be used as a primary sensor for both feedback control of the pulping and feedforward control of bleaching. We report here the results of a series of laboratory tests that characterized the fluorescence properties of wood pulp and demonstrated a correlation between various fluorescence functions and the Kappa number of the pulps as determined by TAPPI Procedure T236.

Jeffers, L. A.; Roman, G. W.

1994-04-01T23:59:59.000Z

391

Feasibility study of wood-fired cogeneration at a Wood Products Industrial Park, Belington, WV. Phase II  

DOE Green Energy (OSTI)

Customarily, electricity is generated in a utility power plant while thermal energy is generated in a heating/cooling plant; the electricity produced at the power plant is transmitted to the heating/cooling plant to power equipments. These two separate systems waste vast amounts of heat and result in individual efficiencies of about 35%. Cogeneration is the sequential production of power (electrical or mechanical) and thermal energy (process steam, hot/chilled water) from a single power source; the reject heat of one process issued as input into the subsequent process. Cogeneration increases the efficiency of these stand-alone systems by producing these two products sequentially at one location using a small additional amount of fuel, rendering the system efficiency greater than 70%. This report discusses cogeneration technologies as applied to wood fuel fired system.

Vasenda, S.K.; Hassler, C.C.

1992-06-01T23:59:59.000Z

392

Biomass and Bioenergy 31 (2007) 638645 Forest bioenergy system to reduce the hazard of wildfires  

E-Print Network (OSTI)

-fueling existing coal-fired power plants Forest Energy Products currently produces wood pellets for home Contract'' for utilization in small power plants (o3 MW), and a wood-heating pellet manufacturing facility its production. Forest Energy Products has produced wood pellets for wood stoves and other uses

393

"You could see a town lying ahead in its whole, as definitely formed as a plate on a table. And your road entered and ran straight through it, laid  

E-Print Network (OSTI)

-fueling existing coal-fired power plants Forest Energy Products currently produces wood pellets for home Contract'' for utilization in small power plants (o3 MW), and a wood-heating pellet manufacturing facility its production. Forest Energy Products has produced wood pellets for wood stoves and other uses

394

Digestive enzyme activities and gastrointestinal fermentation in wood-eating catfishes  

E-Print Network (OSTI)

the neotropical suckermouth armored catWshes (Siluriformes,T (2009) Non-native suckermouth armored catWshes in Florida:Loricariidae), wood-eating armored catWshes from tropical

German, Donovan P.; Bittong, Rosalie A.

2009-01-01T23:59:59.000Z

395

Health effects of residential wood combustion: survey of knowledge and research  

DOE Green Energy (OSTI)

Health and safety issues related to residential wood burning are examined. Current research and findings are also described, and research status is assessed in terms of future health and safety requirements. (MHR)

None

1980-09-01T23:59:59.000Z

396

Technical Viability of Biocoke from Mixtures Coal-Wood Charcoal for ...  

Science Conference Proceedings (OSTI)

The purpose of this paper is to replace from 10% to 50% of the coal used in cokemaking by mixing it with a renewable source (wood charcoal). The powder ...

397

Thermal properties of structural details in wood frame homes : analysis and recommendations  

E-Print Network (OSTI)

The wood platform frame home is the dominant design in the United States when it comes to single family housing. Introduced during the mid-nineteenth century, the scheme is a cheap, fast, and proven design that takes ...

Graybeal, Alexander Kung

2010-01-01T23:59:59.000Z

398

Global Trade of Wood and Paper Products Analysis by: Dr. Ed K. Pepke  

E-Print Network (OSTI)

of wood products, such as the United States, have become major net importers. Conversely, China, a country renewable energy sources in light of escalating fossil fuel prices, have created new international trade

399

Lowell L. Wood, 1981 | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Lowell L. Wood, 1981 The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates 2000's 1990's 1980's 1970's 1960's Ceremony The Life of...

400

SIDA DemoEast programme in Estonia. Supply, delivery and installation of wood pellet burning equipment  

E-Print Network (OSTI)

burning equipment SUMMARY DemoEast programme is a part of Baltic Billion Fund 2 with the overall aim and Kiltsi light oil fired boilers have been converted to wood pellets burning. The supplier

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Microsoft Word - CX-Driscoll-NaselleWood PolesFY12_WEB.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: In-kind wood pole replacements as needed on the Driscoll-Naselle No. 1 115-kV transmission line...

402

Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Heating & Cooling Commercial Heating & Cooling Heating Maximum Rebate $6,000 Program Info Funding Source New Hampshire Renewable Energy Fund (FY 2013) Start Date 04/14/2010 Expiration Date When progr State New Hampshire Program Type State Rebate Program Rebate Amount 30% Provider New Hampshire Public Utilities Commission The New Hampshire Public Utilities Commission (PUC) is offering rebates of 30% of the installed cost of qualifying new residential bulk-fed, wood-pellet central heating boilers or furnaces. The maximum rebate is $6,000. To qualify, systems must (1) become operational on or after May 1,

403

Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe |  

Open Energy Info (EERE)

Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Good Practice Guidance on the Sustainable Mobilisation of Wood in Europe Agency/Company /Organization: United Nations Economic Commission for Europe Partner: Food and Agriculture Organization of the United Nations Sector: Land Focus Area: Biomass, Forestry Topics: Implementation, Policies/deployment programs Resource Type: Guide/manual, Lessons learned/best practices Website: www.unece.org/publications/oes/Timber_wood-mobilization-good_practice- UN Region: "Western & Eastern Europe" is not in the list of possible values (Eastern Africa, Middle Africa, Northern Africa, Southern Africa, Western Africa, Caribbean, Central America, South America, Northern America, Central Asia, Eastern Asia, Southern Asia, South-Eastern Asia, Western Asia, Eastern Europe, Northern Europe, Southern Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property.

404

Housing 2020: The future of wood in U.S. dwellings  

Science Conference Proceedings (OSTI)

This paper presented at the International Panel and Engineered-Wood Technology Exposition examines the effect that reduced material resources, energy conservation, manufactured dwellings, and construction techniques have had on the use of wood in the housing industry. The topics of the paper include the impact of the energy crisis, financing and affordability crisis, lumber crisis, and a forecast of what the house of the year 2020 will look like, how it will be constructed and of what material will it be constructed.

Wendt, R.L. [Oak Ridge National Lab., TN (United States). Energy Div.

1994-12-31T23:59:59.000Z

405

Synthesis of SiC ceramics by the carbothermal reduction of mineralized wood with silica  

DOE Green Energy (OSTI)

This paper describes the synthesis of SiC by the carbothermal reduction of mineralized wood with silica in acidic condition. The biomorphic cellular SiC ceramics were prepared by controlling the amount of silica and the size of SiC nanoparticles. Up to 20wt% of SiO2 was mineralized into wood cellular structures and the hierarchical structures such as cells, lumen, and pits were mainly retained after the thermal treatment at 1400 C.

Shin, Yongsoon; Wang, Chong M.; Exarhos, Gregory J.

2005-01-06T23:59:59.000Z

406

Variations in the Hygrothermal Properties of Several Wood-Based Building Products  

E-Print Network (OSTI)

A systematic investigation of the hygrothermal properties of a number of oriented strand boards, plywood products, wood fibreboards and composite wood sidings has resulted in new information on the variations of thermal conductivity, water vapour permeability, moisture diffusivity, sorption- desorption -suction isotherms, water absorption coefficient and air permeability of these classes of products in North America. The experimental and analytical procedures used in the investigation are all based either on International Standards or on well-documented and peer-reviewed approaches.

J.C. Lackey; N. Normandin; D. van Reenen; M. K. Kumaran; J. C. Lackey; N. Norm; F. Tariku; D. Van Reenen

2003-01-01T23:59:59.000Z

407

Smoke and toxic species analyses from controlled combustion of wood impregnated with guayule resin  

E-Print Network (OSTI)

Dominant commercial treatments currently used for wood preservation are pentachlorophenols (PCP), creosote, and chromium copper arsenicals. These wood preservatives present many studied and documented environmental and toxicological problems with both use of the products themselves, and with the production of secondary reaction contaminants. Furthermore, several of these preservatives are considered priority pollutants according to the U. S. Environmental Protection Agency and are heavily regulated. The need for an environmentally benign combined fire/rot retardant treatment for wood that will effectively reduce both fire and decay is clearly evident. Guayule resin, a co-by-product during rubber extraction from the guayule shrub, is being explored by us as a natural, biodegradable wood rot and fire retardant with potential commercial applications. Wood impregnated with guayule resin has survived over eight years in tropical soils, free of rot, decay, and insect infestations. This study qualitatively analyzed the treated and untreated wood samples for ignitability, flame spread, toxic fumes, and smoke generation. Ignitability of the wood sample of fixed geometry was quantified by measuring the time required for ignition of treated samples vs. untreated samples. Flame spread was measured after ignition with a propane flame by a simple stopwatch-ruler technique. Smoke mass was determined in an Arapahoe Smoke Chamber as per ASTM D-4100. Analysis of the fumes involved continuous CO, C02, NOx, SOx, and 02 analyses using the Bacharach Instrument Model 300. Cascade impaction was used to determine the particle size distribution of the smoke and for smoke mass determination. Respirable particles were assessed by utilizing the Anderson 2000 Inc. 1 AFCM Ambient Particle Fractionating Sampler. Inflections of guayule-impregnated and untreated pine are indeed minor with respect to all aspects investigated. Ignition data indicated guayule-impregnated pine did not ignite as quickly as untreated pine. Evidence conveys favorable consideration for further research of wood preservation with guayule resin.

Smith, Lonnie

1995-01-01T23:59:59.000Z

408

Characterization of Waste Tar Associated with Abandoned Wood Chemical Plant Sites in Northwest Pennsylvania, USA  

SciTech Connect

Over 70 wood chemical plants operated in northern Pennsylvania between ca. 1890 and 1950, all located within 72 km of the New York state border. Their original purpose was to salvage the small unwanted hardwood trees left behind by the lumber mills, and to make charcoal, calcium acetate and methanol for a number of industrial uses via destructive distillation. At many old wood chemical plant sites, unknown quantities of wood tar remain as a residual contaminant and pose a pollution threat to aquatic life in nearby streams. Research on the composition and properties of residual wood tars from five abandoned industrial sites in Pennsylvania are described. Weathered wood tars were more viscous and contained fewer volatile and semivolatile organic compounds than did soil-buried tars. Phenol, 2-methylphenol (o-cresol), 4-methylphenol (p-cresol), and 2, 4-dimethylphenol were found in all sampled tars. These water-soluble phenolic compounds were released quasi-instantaneously in aqueous solution, followed by a slower rate of release, consistent with the behavior of similar compounds in other dense non-aqueous liquids. Air-exposed wood tar deposits developed a hard crust, which contained fewer volatiles and semivolatiles and had a higher softening point than other samples. These tars eroded to form a powdered soil colonized by lichens and mosses. Residual wood tar material found at one site was shown to be thermally altered, likely during the historical destruction of the chemical plant by fire. Recovered wood tar wastes have a relatively high heating value and may have use as a potential, but limited, alternate energy source.

Edendorn, H.M.; Severson, D. (Allegheny Institute of Natural History, Bradford, PA)

2007-07-01T23:59:59.000Z

409

Oxidation of volatiles in residential wood burning equipment. Final technical report, September 1980-February 1984  

DOE Green Energy (OSTI)

The objectives of this project are to measure, through the use of laboratory combustors, those conditions which promote complete combustion of wood volatiles in residential wood burning equipment. The conditions of interest are combustion temperature, residence time, stoichiometry, and air mixing. The project objectives are met through two laboratory approaches: (1) model compound studies: in order to measure the overall rates of oxidative pyrolysis of biomass volatiles, and to determine the types of intermediate organic species which are likely to form as part of this process, model compounds have been reacted in a specialized jet-stirred reactor, which has been developed as part of this research. (2) high-intensity wood combustion: in order to study the clean combustion of wood, that is, to investigate the conceptual design features required for clean burning, and to ascertain the levels and types of pollutant and condensible species which are most difficult to oxidize, a high-intensity, research wood combustor has been developed and examined for the different phases of the wood burning cycle. Although the objectives of the project have been met, it has not been possible, because of support limitations, to thoroughly explore several interesting aspects which have arisen because of this research. For example, a third laboratory system in which wood pyrolysis gas is injected directly into the a well characterized reactor, so that the kinetics and mechanisms of the gas-phase reaction of the actual biomass volatiles can be studied, could not be thoroughly developed. Refinements in the high-intensity wood combustor, which would bring its design features closer to practicality for the industry, could not be considered. 32 references, 37 figures, 10 tables.

Malte, P.C.; Thornton, M.M.; Kamber, P.D.

1984-04-01T23:59:59.000Z

410

Assessment of Treated Wood and Alternate Materials for Utility Distribution Poles  

Science Conference Proceedings (OSTI)

This report provides salient facts about common and potential alternative wood pole preservatives and common and potential alternative wood pole materials for use in the electrical distribution setting. Relevant organizations are also discussed. The report presents a brief history of the development and use of each preservative and pole material. It characterizes, qualifies, and quantifies (where possible) the potential impacts of shifts from common preservatives to alternative preservatives and from sou...

2010-10-11T23:59:59.000Z

411

HIGH RESOLUTION MICROTOMOGRAPHY FOR DENSITY AND SPATIAL INFORMATION ABOUT WOOD STRUCTURES.  

DOE Green Energy (OSTI)

Microtomography has successfully been used to characterize loss of structural integrity of wood. Tomographic images were generated with the newly developed third generation x-ray computed microtomography (XCMT) instrument at the X27A beamline at the National Synchrotron Light Source (NSLS). The beamline is equipped with high-flux x-ray monochromator based on multilayer optics developed for this application. The sample is mounted on a translation stage with which to center the sample rotation, a rotation stage to perform the rotation during data collection and a motorized goniometer head for small alignment motions. The absorption image is recorded by a single-crystal scintillator, an optical microscope and a cooled CCD array detector. Data reconstruction has provided three-dimensional geometry of the heterogeneous wood matrix in microtomographic images. Wood is a heterogeneous material composed of long lignocellulose vessels. Although wood is a strong natural product, fungi have evolved chemical systems that weaken the strength properties of wood by degrading structural vessels. Tomographic images with a resolution of three microns were obtained nonintrusively to characterize the compromised structural integrity of wood. Computational tools developed by Lindquist et al (1996) applied to characterize the microstructure of the tomographic volumes.

ILLMAN,B.

1999-07-22T23:59:59.000Z

412

Wood Residues as Fuel Source for Lime Kilns  

E-Print Network (OSTI)

One of the main obstacles to total energy self sufficiency of kraft mills appears to be the fossil fuel requirements of the lime kilns. If an economical technology can be developed which allows fossil fuel to be replaced in whole or in part by wood-based fuel, the savings in fossil fuel by the pulp and paper industry would be very substantial. Our study focuses around the direct in-situ combustion of hog fuel fed from the cold feed end in order to substantially reduce the fossil fuel fired from the hot product discharge end of the lime kiln. Thus far we have carried out two series of tests using two different pilot-scale kilns and dry limestone in the first test series and mill produced lime mud in the second test series. Mill scale trials have just been completed and the preliminary results indicate that our approach is potentially a very cost-effective and simple option to substantially reduce or possibly eliminate fossil-fuel usage in lime kilns.

Azarniouch, M. K.; Philp, R. J.

1984-01-01T23:59:59.000Z

413

A model for the oxidative pyrolysis of wood  

SciTech Connect

A generalized pyrolysis model (Gpyro) is applied to simulate the oxidative pyrolysis of white pine slabs irradiated under nonflaming conditions. Conservation equations for gaseous and solid mass, energy, species, and gaseous momentum (Darcy's law approximation) inside the decomposing solid are solved to calculate profiles of temperature, mass fractions, and pressure inside the decomposing wood. The condensed phase consists of four species, and the gas that fills the voids inside the decomposing solid consists of seven species. Four heterogeneous (gas/solid) reactions and two homogeneous (gas/gas) reactions are included. Diffusion of oxygen from the ambient into the decomposing solid and its effect on local reactions occurring therein is explicitly modeled. A genetic algorithm is used to extract the required material properties from experimental data at 25 kW/m{sup 2} and 40 kW/m{sup 2} irradiance and ambient oxygen concentrations of 0%, 10.5% and 21% by volume. Optimized model calculations for mass loss rate, surface temperature, and in-depth temperatures reproduce well the experimental data, including the experimentally observed increase in temperature and mass loss rate with increasing oxygen concentration. (author)

Lautenberger, Chris; Fernandez-Pello, Carlos [Department of Mechanical Engineering, University of California, Berkeley, Berkeley, CA 94720 (United States)

2009-08-15T23:59:59.000Z

414

Wood Energy in Alaska– Case Study Evaluations of Selected Facilities  

E-Print Network (OSTI)

multiple use management of the Nation’s forest resources for sustained yields of wood, water, forage, wildlife, and recreation. Through forestry research, cooperation with the States and private forest owners, and management of the National Forests and National Grasslands, it strives—as directed by Congress—to provide increasingly greater service to a growing Nation. The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination, write

United States; Forest Service

2009-01-01T23:59:59.000Z

415

URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT  

DOE Green Energy (OSTI)

An Environmental Questionnaire for the demonstration at the Bellefield Boiler Plant (BBP) was submitted to the national Energy Technology Laboratory. An R&D variance for the air permit at the BBP was sought from the Allegheny County Health Department (ACHD). R&D variances for the solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS) were sought from the Pennsylvania Department of Environmental Protection (PADEP). Construction wood was acquired from Thompson Properties and Seven D Corporation. Verbal authorizations were received in all cases. Memoranda of understanding were executed by the University of Pittsburgh with BBP, JARC and ETS. Construction wood was collected from Thompson Properties and from Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were hammer milled at ETS and half of the product delivered to MVTC. Blends of wood and coal, produced at MVTC by staff of JARC and MVTC, were shipped by rail to BBP. The experimental portion of the project was carried out at BBP in late March and early April 2001. Several preliminary tests were successfully conducted using blends of 20% and 33% wood by volume. Four one-day tests using a blend of 40% wood by volume were then carried out. Problems of feeding and slagging were experienced with the 40% blend. Light-colored fly ash was observed coming from the stack during all four tests. Emissions of SO{sub 2}, NOx and total particulates, measured by Energy Systems Associates, decreased when compared with combusting coal alone. A procedure for calculating material and energy balances on BBP's Boiler No.1 was developed, using the results of an earlier compliance test at the plant. Material and energy balances were then calculated for the four test periods. Boiler efficiency was found to decrease slightly when the fuel was shifted from coal to the 40% blend. Neither commercial production of sized urban waste wood for the energy market in Pittsburgh nor commercial cofiring of wood/coal blends at BBP are anticipated in the near future.

James T. Cobb Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

2004-04-08T23:59:59.000Z

416

Home Page > Business > Industrial > Global Trade Of Wood Chips Down 26% In 2009 As Pulpmills Reduce Production Worldwide, Reports Wood Resources International  

E-Print Network (OSTI)

Poster Explore Strategies in Technical Analysis from Experienced Brokers. www.Lind-Waldock.com , USA financial crises and the reduced demand for paper products worldwide. This year, only an estimated 25 worldwide, European demand for pellets and biomass chips, outlook for plantation wood chip supply, ocean

417

Quantifying And Predicting Wood Quality Of Loblolly And Slash Pine Under Intensive Forest Management Final Technical Report  

DOE Green Energy (OSTI)

The forest industry will increasingly rely on fast-growing intensively managed southern pine plantations to furnish wood and fiber. Intensive silvicultural practices, including competition control, stand density control, fertilization, and genetic improvement are yielding tremendous gains in the quantity of wood production from commercial forest land. How these technologies affect wood properties was heretofore unknown, although there is concern about the suitability of fast-grown wood for traditional forest products. A four year study was undertaken to examine the effects of these intensive practices on the properties of loblolly and slash pine wood by applying a common sampling method over 10 existing field experiments. Early weed control gets young pines off to a rapid start, often with dramatically increased growth rates. This response is all in juvenile wood however, which is low in density and strength. Similar results are found with early Nitrogen fertilization at the time of planting. These treatments increase the proportion of juvenile wood in the tree. Later, mid-rotation fertilization with Nitrogen and Phosphorus can have long term (4-8 year) growth gains. Slight reductions in wood density are short-lived (1-2 years) and occur while the tree is producing dense, stiff mature wood. Impacts of mid-rotation fertilization on wood properties for manufacturing are estimated to be minimal. Genetic differences are evident in wood density and other properties. Single family plantings showed somewhat more uniform properties than bulk improved or unimproved seedlots. Selection of genetic sources with optimal wood properties may counter some of the negative impacts of intensive weed control and fertilization. This work will allow forest managers to better predict the effects of their practices on the quality of their final product.

Richard F. Daniels; Alexander Clark III

2006-05-04T23:59:59.000Z

418

Development and Validation of Marker-Aided Selection Methods for Wood Property Traits in Loblolly Pine and Hybrid Poplar  

SciTech Connect

Wood properties influence pulp and paper quality. Certainly, overall pulp yields are directly related to the cellulose content, changes in hemicellulose content are associated with changes in pulp cohesiveness, and pulping efficiency is related to lignin content. Despite the importance of wood properties on product quality, little progress has been made in improving such traits because current methods of assessing wood and fiber characteristics are time-consuming, expensive, and often imprecise. Genetic improvement of wood and fiber properties has been further hampered by the large size of trees, delayed reproductive maturity and long harvest cycles. Recent developments in molecular genetics will help overcome the physical, economic and biological constraints in assessing and improving wood properties. Genetic maps consisting of numerous molecular markers are now available for loblolly pine and hybrid poplar. Such markers/maps may be used as part of a marker-aided selection and breeding effort or to expedite the isolation and characterization of genes and/or promoters that directly control wood properties. The objectives of this project are: (1) to apply new and rapid analytical techniques for assessing component wood properties to segregating F2 progeny populations of loblolly pine and hybrid poplar, (2) to map quantitative trait loci and identify molecular markers associated with wood properties in each of the above species and (3) to validate marker-aided selection methods for wood properties in loblolly pine and hybrid poplar.

Tuskan, G.A.

2001-06-20T23:59:59.000Z

419

Development of British Columbia wood pellet life cycle inventory and its utilization in the evaluation of domestic pellet applications.  

E-Print Network (OSTI)

??An in-house life cycle inventory (LCI) database for British Columbia (BC) wood pellets is established. The LCI database is used to compare the performance of… (more)

Pa, Ann An

2010-01-01T23:59:59.000Z

420

Torrefied wood pellets as an alternative fuel to coal: Climate benefits and social desirability of production and use.  

E-Print Network (OSTI)

??The objective of this thesis is to study the climate impacts and the social returns and social desirability of torrefied wood pellet production and use… (more)

Happonen, Kiira

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Metagenome of an Anaerobic Microbial Community Decomposing Poplar Wood Chips  

DOE Green Energy (OSTI)

This study describes the composition and metabolic potential of a lignocellulosic biomass degrading community that decays poplar wood chips under anaerobic conditions. We examined the community that developed on poplar biomass in a non-aerated bioreactor over the course of a year, with no microbial inoculation other than the naturally occurring organisms on the woody material. The composition of this community contrasts in important ways with biomass-degrading communities associated with higher organisms, which have evolved over millions of years into a symbiotic relationship. Both mammalian and insect hosts provide partial size reduction, chemical treatments (low or high pH environments), and complex enzymatic 'secretomes' that improve microbial access to cell wall polymers. We hypothesized that in order to efficiently degrade coarse untreated biomass, a spontaneously assembled free-living community must both employ alternative strategies, such as enzymatic lignin depolymerization, for accessing hemicellulose and cellulose and have a much broader metabolic potential than host-associated communities. This would suggest that such a community would make a valuable resource for finding new catalytic functions involved in biomass decomposition and gaining new insight into the poorly understood process of anaerobic lignin depolymerization. Therefore, in addition to determining the major players in this community, our work specifically aimed at identifying functions potentially involved in the depolymerization of cellulose, hemicelluloses, and lignin, and to assign specific roles to the prevalent community members in the collaborative process of biomass decomposition. A bacterium similar to Magnetospirillum was identified among the dominant community members, which could play a key role in the anaerobic breakdown of aromatic compounds. We suggest that these compounds are released from the lignin fraction in poplar hardwood during the decay process, which would point to lignin-modification or depolymerization under anaerobic conditions.

van der Lelie, D.; Taghavi, S.; McCorkle, S. M.; Li, L. L.; Malfatti, S. A.; Monteleone, D.; Donohoe, B. S.; Ding, S. Y.; Adney, W. S.; Himmel, M. E.; Tringe, S. G.

2012-05-01T23:59:59.000Z

422

Fuel switching from wood to LPG can benefit the environment  

SciTech Connect

The Himalaya in India is one of the world's biodiversity hotspots. Various scientific studies have reported and proven that many factors are responsible for the tremendous decline of the Himalayan forests. Extraction of wood biomass from the forests for fuel is one of the factors, as rural households rely entirely on this for their domestic energy. Efforts continue for both conservation and development of the Himalayan forests and landscape. It has been reported that people are still looking for more viable solutions that could help them to improve their lifestyle as well as facilitate ecosystem conservation and preservation of existing biodiversity. In this direction, we have documented the potential of the introduction of liquefied petroleum gas (LPG), which is one of the solutions that have been offered to the local people as a substitute for woodfuel to help meet their domestic energy demand. The results of the current study found dramatic change in per capita woodfuel consumption in the last two decades in the villages where people are using LPG. The outcome showed that woodfuel consumption had been about 475 kg per capita per year in the region, but after introduction of LPG, this was reduced to 285 kg per capita per year in 1990-1995, and was further reduced to 46 kg per capita per year in 2000-2005. Besides improving the living conditions of the local people, this transformation has had great environmental consequences. Empirical evidence shows that this new paradigm shift is having positive external effects on the surrounding forests. Consequently, we have observed a high density of tree saplings and seedlings in adjacent forests, which serves as an assessment indicator of forest health. With the help of the current study, we propose that when thinking about a top-down approach to conservation, better solutions, which are often ignored, should be offered to local people.

Nautiyal, Sunil [Leibniz-Centre for Agricultural Landscape Research (ZALF), Institute of Socioeconomics, Eberswalder Str. 84, 15374 Muencheberg (Germany)], E-mail: sunil.nautiyal@zalf.de; Kaechele, Harald [Leibniz-Centre for Agricultural Landscape Research (ZALF), Institute of Socioeconomics, Eberswalder Str. 84, 15374 Muencheberg (Germany)

2008-11-15T23:59:59.000Z

423

URBAN WOOD/COAL CO-FIRING IN THE BELLEFIELD BOILERPLANT  

DOE Green Energy (OSTI)

During the third quarter, important preparatory work was continued so that the experimental activities can begin early in the fourth quarter. Authorization was awaited in response to the letter that was submitted to the Allegheny County Health Department (ACHD) seeking an R&D variance for the air permit at the Bellefield Boiler Plant (BBP). Verbal authorizations were received from the Pennsylvania Department of Environmental Protection (PADEP) for R&D variances for solid waste permits at the J. A. Rutter Company (JARC), and Emery Tree Service (ETS). Construction wood was acquired from Thompson Properties and Seven D Corporation. Forty tons of pallet and construction wood were ground to produce BioGrind Wood Chips at JARC and delivered to Mon Valley Transportation Company (MVTC). Five tons of construction wood were milled at ETS and half of the product delivered to MVTC. Discussions were held with BBP and Energy Systems Associates (ESA) about the test program. Material and energy balances on Boiler No.1 and a plan for data collection were prepared. Presentations describing the University of Pittsburgh Wood/Coal Co-Firing Program were provided to the Pittsburgh Chapter of the Pennsylvania Society of Professional Engineers, and the Upgraded Coal Interest Group and the Biomass Interest Group (BIG) of the Electric Power Research Institute (EPRI). An article describing the program appeared in the Pittsburgh Post-Gazette. An application was submitted for authorization for a Pennsylvania Switchgrass Energy and Conservation Program.

James T. Cobb, Jr.; Gene E. Geiger; William W. Elder III; William P. Barry; Jun Wang; Hongming Li

2001-08-21T23:59:59.000Z

424

Simple and inexpensive method of wood pellets macro-porosity measurement  

Science Conference Proceedings (OSTI)

A novel simplified stereometric measurement method for determining the macro-porosity of wood pellets through geometrical approach was successfully developed and tested. The irregular ends of pellets of circular cross-section were sanded flat so that their geometry becomes cylinder and their volumes evaluated using mensuration formula. Such formed cylindrical pellets were loose or tap filled to selected volumes to evaluate the macro-porosity and the constant specific weight. The method was extended to evaluate actual wood pellets properties. Overall macro-porosity of actual wood pellets was determined as 41.0 2.5% and 35.5 2.7%, mean bulk density as and, and classified as Class-3:Medium and Class-3&4:Medium to Low for loose and tapped fills, respectively. Hausner ratio and Carr s compressibility index classify wood pellets as freely flowing. The developed stereometric method can be used as a handy inexpensive laboratory procedure to estimate the macro-porosity of different types and makes of wood pellets and other similar packaged materials.

Igathinathane, C. [North Dakota State University; Tumuluru, J.S. [Idaho National Laboratory (INL); Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Lim, C. Jim [University of British Columbia, Vancouver; Melin, Staffan [University of British Columbia, Vancouver; Mohammad, E. [University of British Columbia, Vancouver

2010-01-01T23:59:59.000Z

425

348 P U R S U I T A N D P R O M O T I O N O F S C I E N C E ndia is endowed with abundant sunlight,  

E-Print Network (OSTI)

energy technologies which include improved cooking stoves, biogas plants, biomass gasifiers, solar systems/devices such as biogas plants, improved wood stoves, wind pumps, biomass gasifiers, solar cookers.2 million family size biogas plants, 3400 community/institutional biogas plants, 33.4 million improved cook

Srinivasan, N.

426

Compound and Elemental Analysis At Hot Lake Area (Wood, 2002) | Open Energy  

Open Energy Info (EERE)

Area (Wood, 2002) Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Hot Lake Area (Wood, 2002) Exploration Activity Details Location Hot Lake Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

427

Compound and Elemental Analysis At Mickey Hot Springs Area (Wood, 2002) |  

Open Energy Info (EERE)

Mickey Hot Springs Area (Wood, 2002) Mickey Hot Springs Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Mickey Hot Springs Area (Wood, 2002) Exploration Activity Details Location Mickey Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

428

Compound and Elemental Analysis At Zim's Hot Springs Geothermal Area (Wood,  

Open Energy Info (EERE)

Zim's Hot Springs Geothermal Area (Wood, Zim's Hot Springs Geothermal Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Zim's Hot Springs Geothermal Area (Wood, 2002) Exploration Activity Details Location Zim's Hot Springs Geothermal Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley

429

Water Sampling At Breitenbush Hot Springs Area (Wood, 2002) | Open Energy  

Open Energy Info (EERE)

Wood, 2002) Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Breitenbush Hot Springs Area (Wood, 2002) Exploration Activity Details Location Breitenbush Hot Springs Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

430

Compound and Elemental Analysis At Mccredie Hot Springs Area (Wood, 2002) |  

Open Energy Info (EERE)

Mccredie Hot Springs Area (Wood, 2002) Mccredie Hot Springs Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At McCredie Hot Springs Area (Wood, 2002) Exploration Activity Details Location McCredie Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

431

Compound and Elemental Analysis At Heber Area (Wood, 2002) | Open Energy  

Open Energy Info (EERE)

Compound and Elemental Analysis At Heber Area (Wood, 2002) Compound and Elemental Analysis At Heber Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Heber Area (Wood, 2002) Exploration Activity Details Location Heber Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

432

EA-1850: Flambeau River BioFuels, Inc. Proposed Wood Biomass-to-Liquid Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

50: Flambeau River BioFuels, Inc. Proposed Wood 50: Flambeau River BioFuels, Inc. Proposed Wood Biomass-to-Liquid Fuel Biorefinery, Park Falls, Wisconsin EA-1850: Flambeau River BioFuels, Inc. Proposed Wood Biomass-to-Liquid Fuel Biorefinery, Park Falls, Wisconsin Summary NOTE: This EA has been cancelled. This EA will evaluate the environmental impacts of a proposal to provide federal funding to Flambeau River Biofuels (FRB) to construct and operate a biomass-to-liquid biorefinery in Park Falls, Wisconsin, on property currently used by Flambeau Rivers Paper, LLC (FRP) for a pulp and paper mill and Johnson Timber Corporation's (JTC) Summit Lake Yard for timber storage. This project would design a biorefinery which would produce up to 1,150 barrels per day (bpd) of clean syncrude. The biorefinery would also supply

433

Assessment of potential wood supply for intermediate scale thermoconversion facilities, Tasks I, II, III  

DOE Green Energy (OSTI)

The Department of Energy's Biomass Thermochemical Conversion Program has been concerned with the potential of wood biomass to contribute to the Nation's energy supply. One of the factors inhibiting the selection of wood biomass for energy by non-forest industries, especially by those requiring large quantities (500 to 2000 green tons per day), is concern with adequate fuel supply in terms of both a supply system and an adequate resource base. With respect to the latter, this report looks at the gross resource base as has been historically reported and also examines factors other than traditional product removals that could reduce to some degree the amount of resource that is available. The study also examined the conversion of a New England utility from coal to wood chips.

Not Available

1985-11-01T23:59:59.000Z

434

Water Sampling At Hot Lake Area (Wood, 2002) | Open Energy Information  

Open Energy Info (EERE)

Hot Lake Area (Wood, 2002) Hot Lake Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Hot Lake Area (Wood, 2002) Exploration Activity Details Location Hot Lake Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the Salton Sea and Heber geothermal fields of southern California; and 7) the

435

Compound and Elemental Analysis At Salton Sea Area (Wood, 2002) | Open  

Open Energy Info (EERE)

Wood, 2002) Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Salton Sea Area (Wood, 2002) Exploration Activity Details Location Salton Sea Area Exploration Technique Compound and Elemental Analysis Activity Date Usefulness not useful DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the Salton Sea and Heber geothermal fields of southern California; and 7) the

436

Water Sampling At Crane Hot Springs Area (Wood, 2002) | Open Energy  

Open Energy Info (EERE)

Hot Springs Area (Wood, 2002) Hot Springs Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Crane Hot Springs Area (Wood, 2002) Exploration Activity Details Location Crane Hot Springs Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

437

Microsoft Word - CX-AlveyDistWoodPoles_FY13_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Alvey District Wood Pole Replacement Projects Alvey District Wood Pole Replacement Projects PP&A Project No.: 2663 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Various transmission lines located in Douglas, Linn, and Lane counties, Oregon. Refer to Project Location Attachment for transmission lines and corresponding structure locations. Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace deteriorating wood poles and associated structural/electrical components (e.g. cross arms, insulators, guy anchors, etc.) along the subject transmission lines. Replacement will be in-kind and will utilize the existing holes to minimize ground disturbance. If necessary, an auger will be used to remove any loose soil from

438

Microsoft Word - CX-NorthBendWoodPoles_FY13_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

North Bend District Wood Pole Replacement Projects North Bend District Wood Pole Replacement Projects PP&A Project No.: 2658 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Various transmission lines located in Douglas, Linn, and Lane counties, Oregon. Refer to Project Location Attachment for transmission lines and corresponding structure locations. Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA proposes to replace deteriorating wood poles and associated structural/electrical components (e.g. cross arms, insulators, guy anchors, etc.) along the subject transmission lines. Replacement will be in-kind and will utilize the existing holes to minimize ground disturbance. If necessary, an auger will be used to remove any loose soil from

439

Microsoft Word - CX-PilotButte-LaPineWoodPoleFY12_WEB.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

30, 2012 30, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Pilot Butte-La Pine No. 1 Wood Pole Replacement Project PP&A Project No.: 2188 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B4.6 Additions and modifications to transmission facilities ... include ... replacement of wood poles. Location: Pilot Butte-La Pine No. 1 transmission line located in Deschutes County, Oregon, at the following structures: Mile Structure 5 7 6 5 7 4 16 7 16 8 17 5 18 1 18 3 21 3 21 8 25 3 30 5 Proposed by: Bonneville Power Administration (BPA) Description of the Proposed Action: BPA is proposing to replace 12 deteriorating wood pole

440

Water Sampling At Mccredie Hot Springs Area (Wood, 2002) | Open Energy  

Open Energy Info (EERE)

Mccredie Hot Springs Area (Wood, 2002) Mccredie Hot Springs Area (Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Mccredie Hot Springs Area (Wood, 2002) Exploration Activity Details Location Mccredie Hot Springs Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Residential wood burning: Energy modeling and conventional fuel displacement in a national sample  

SciTech Connect

This research studied the natural, built, and behavioral factors predictive of energy consumption for residential space heating with wood or conventional fuels. This study was a secondary analysis of survey data from a nationwide representative sample of 5,682 households collected DOE in the 1984-1985 REC survey. Included were: weather, census division and utility data, interviewer-supplied dwelling measurements and respondent-reported energy-related family behaviors. Linear-regression procedures were used to develop a model that identified key determinants accounting for the variability in wood consumption. A nonlinear-regression model was employed to estimate the amount of conventional fuels used for space heating. The model was also used to estimate the amount of conventional fuels being displaced by wood-heating systems. There was a significant (p {le} .05) linear relationship between the dependent variable, square root of cords burned, various independent variables.

Warsco, K.S.

1988-01-01T23:59:59.000Z

442

Renewable wood fuel: Fuel feed system for a pulverized coal boiler. Final report  

DOE Green Energy (OSTI)

This report evaluates a pilot test program conducted by New York State Gas & Electric Corporation to evaluate the feasibility of co-firing a pulverized coal plant with renewable wood fuels. The goal was to establish that such a co-firing system can reduce air emissions while maintaining good operational procedures and cost controls. The test fuel feed system employed at Greenidge Station`s Boiler 6 was shown to be effective in feeding wood products. Emission results were promising and an economic analysis indicates that it will be beneficial to pursue further refinements to the equipment and systems. The report recommends further evaluation of the generation and emission impacts using woods of varied moisture contents and at varied Btu input rates to determine if a drying system would be a cost-effective option.

NONE

1996-01-01T23:59:59.000Z

443

Nesting ecology of wood thrush (Turdidae: Passeriformes) in hardwood forests of South Carolina  

DOE Green Energy (OSTI)

The nesting success of the Wood Thrush (Hylocichla mustelina) in bottomland and upland forests in South Carolina. Twenty-one of 26 nests were located in bottomland sites, and 76.2% of these nests were in narrow (<150-m wide) bottomland corridors. No nests were found in upland sites enclosed by fields. The Mayfield success rate for 20 nests was 35.3%. All nest failures were attributed to predation, no nests were parasitized by Brown-headed Cowbirds (Molothrus ater). Nest sites were characterized by a dense overstory and a moderately developed understory. Bottomland hardwoods, especially relatively narrow corridors, appear to provide suitable nesting habitat for Wood Thrush in this region. Brood parasitism by Brown-headed Cowbirds does not appear to be a significant factor in the failure of Wood Thrush nests in these sites.

Sargent, Robert, A.; Kilgo, John, C.; Chapman, Brian, R.; Miller, Karl, V.

2003-01-01T23:59:59.000Z

444

Water Sampling At Belknap-Foley-Bigelow Hot Springs Area (Wood, 2002) |  

Open Energy Info (EERE)

Wood, 2002) Wood, 2002) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At Belknap-Foley-Bigelow Hot Springs Area (Wood, 2002) Exploration Activity Details Location Belknap-Foley-Bigelow Hot Springs Area Exploration Technique Water Sampling Activity Date Usefulness could be useful with more improvements DOE-funding Unknown Notes Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: 1) the North Island of New Zealand (three sets of samples from three different years) and the South Island of New Zealand (1 set of samples); 2) the Cascades of Oregon; 3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; 4) the Dixie Valley and Beowawe fields in Nevada; 5) Palinpiiion, the Philippines; 6) the

445

The flash pyrolysis and methanolysis of biomass (wood) for production of ethylene, benzene and methanol  

DOE Green Energy (OSTI)

The process chemistry of the flash pyrolysis of biomass (wood) with the reactive gases, H{sub 2} and CH{sub 4} and with the non-reactive gases He and N{sub 2} is being determined in a 1 in. downflow tubular reactor at pressures from 20 to 1000 psi and temperatures from 600 to 1000{degrees}C. With hydrogen, flash hydropyrolysis leads to high yields of methane and CO which can be used for SNG and methanol fuel production. With methane, flash methanolysis leads to high yields of ethylene, benzene and CO which can be used for the production of valuable chemical feedstocks and methanol transportation fuel. At reactor conditions of 50 psi and 1000{degrees}C and approximately 1 sec residence time, the yields based on pine wood carbon conversion are up to 25% for ethylene, 25% for benzene, and 45% for CO, indicating that over 90% of the carbon in pine is converted to valuable products. Pine wood produces higher yields of hydrocarbon products than Douglas fir wood; the yield of ethylene is 2.3 times higher with methane than with helium or nitrogen, and for pine, the ratio is 7.5 times higher. The mechanism appears to be a free radical reaction between CH{sub 4} and the pyrolyzed wood. There appears to be no net production or consumption of methane. A preliminary process design and analysis indicates a potentially economical competitive system for the production of ethylene, benzene and methanol based on the methanolysis of wood. 10 refs., 18 figs., 1 tab.

Steinberg, M.; Fallon, P.T.; Sundaram, M.S.

1990-02-01T23:59:59.000Z

446

Fuel selection study for Fort Leonard Wood, Missouri. Volume 2. Final report  

SciTech Connect

The objectives of the Fuel Selection Study for Fort Leonard Wood, Missouri were: (1) to evaluate specified sources of heating energy - electric or fuel oil, and the necessary associated conversion work for meeting the heating requirements of selected buildings at Fort Leonard Wood, Missouri; and (2) to determine the impact on energy usage and cost savings which would result from increasing insulation levels in the building under review. The buildings considered in this study included 2,862 family housing units, 5 Bachelor Officers' Quarters, an Enlisted Women's Barracks, the Medical Detachment Building, and the Heating Plant supporting the main Fort laundry.

1975-05-01T23:59:59.000Z

447

Fuel selection study for Fort Leonard Wood, Missouri. Volume 1. Final report  

SciTech Connect

The objectives of the Fuel Selection Study for Fort Leonard Wood, Missouri were: (1) to evaluate specified sources of heating energy - electric or fuel oil, and the necessary associated conversion work for meeting the heating requirements of selected buildings at Fort Leonard Wood, Missouri; and (2) to determine the impact on energy usage and cost savings which would result from increasing insulation levels in the building under review. The buildings considered in this study included 2,862 family housing units, 5 Bachelor Officers' Quarters, an Enlisted Women's Barracks, the Medical Detachment Building, and the Heating Plant supporting the main Fort laundry.

1975-05-01T23:59:59.000Z

448

Thermal Conductivity of Wood-Derived Graphite and Copper-Graphite  

SciTech Connect

The thermal conductivity of wood-derived graphite and graphite/copper composites was studied both experimentally and using finite element analysis. The unique, naturally-derived, anisotropic porosity inherent to wood-derived carbon makes standard porosity-based approximations for thermal conductivity poor estimators. For this reason, a finite element technique which uses sample microstructure as model input was utilized to determine the conductivity of the carbon phase independent of porosity. Similar modeling techniques were also applied to carbon/copper composite microstructures and predicted conductivities were compared to those determined via experiment.

Johnson, M. T. [Northwestern University, Evanston; Childers, Amanda [Northwestern University, Evanston; Ramírez-Rico, J. [Universidad de Sevilla-CSIC, Spain; Wang, Hsin [ORNL; Faber, K. T. [Northwestern University, Evanston

2013-01-01T23:59:59.000Z

449

Price sensitivity of bioethanol produced in New Zealand from Pinus radiata wood  

SciTech Connect

This paper presents an analysis conducted of designs for industry-scale ethanol production facilities that use both hexoses and pentoses to produce 97 to 107 tonnes of anhydrous ethanol per day from 960 tonnes of Pinus radiata wood of 50% moisture content (480 oven-dried tonnes). Various process options and available technologies were considered for cost comparisons. The base case plant design was used to assess the probable importance of not fermenting thee wood pentose fraction. When pentose sugars were not fermented, the ethanol price increased from $0.71/L to $0.75/L. The influence of various economic factors on selling price is assessed.

Manderson, G.J.; Spencer, K.; Paterson, A.H.J. (Massey Univ., Palmerston North (New Zealand). Dept. of Biotechnology); Qureshi, N. (Dept. of Food Sciences, Univ. of Illinois at Urbana, Urbana, IL (US)); Jansen, D.E. (Biochemical Processing Centre, Biotechnology Div., DSIR, Palmerston North (NZ))

1989-01-01T23:59:59.000Z

450

Evaluation of Concrete Containing Fly Ash With High Carbon Content and/or Small Amounts of Wood  

Science Conference Proceedings (OSTI)

This report provides a comprehensive database of information on the impacts of the use of high carbon coal ashes and concretes with small amounts of wood ash on the performance of concretes. It is expected these data will support easing the restrictions on the use of high carbon ashes and any wood ash products in concrete in the ASTM standards.

1998-06-25T23:59:59.000Z

451

Identification of environmental issues: Hybrid wood-geothermal power plant, Wendel-Amedee KGRA, Lassen County, California: First phase report  

DOE Green Energy (OSTI)

The development of a 55 MWe power plant in Lassen County, California, has been proposed. The proposed power plant is unique in that it will utilize goethermal heat and wood fuel to generate electrical power. This report identifies environmental issues and constraints which may impact the proposed hybrid wood-geothermal power plant. (ACR)

Not Available

1981-08-14T23:59:59.000Z

452

DOE/EA-1636: Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project Mitigation Action Plan (March 2009)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Burnt Woods and Santiam-Toledo Pole Replacement Project Burnt Woods and Santiam-Toledo Pole Replacement Project DOE/EA-1636 Summary This Mitigation Action Plan (MAP) is part of the Finding of No Significant Impact (FONSI) for the Albany-Burnt Woods and Santiam-Toledo Pole Replacement Project. The project involves replacing wood pole structures on about 26 miles of the Albany-Burnt Woods single-circuit, 115- kilovolt (kV) transmission line and about 21 miles of the Santiam-Toledo single circuit, 230-kV transmission line in Linn, Benton and Lincoln counties, Oregon. This MAP is for the Proposed Action and includes all of the integral elements and commitments made in the Environmental Assessment (EA) to mitigate any potential adverse environmental impacts. The purpose of this MAP is to explain how the mitigation measures will be

453

Final report on the use of wood as a heat source and the quality of insulation in Vermont households  

SciTech Connect

The State of Vermont Energy Office conducted a study to provide the quantitative attitudinal and behavioral information essential to assessing the use of wood as a heat source in the state. General results show that 54% of all home owners in Vermont burn wood to some degree, 47% use wood as a supplementary heat source, 9% use wood as a primary source, and the extent to which wood is used does not differ by geographic area. Results on household uses (cooking and heating) are summarized. A summary of queries on insulation attitudes, awareness, and practices shows that a majority of homeowners believe they have adequate insulation, but are unaware of R factor. In Vermont, about one-fourth of homeowners improved their insulation in the last three years. (MCW)

1976-01-01T23:59:59.000Z

454

Residential Sector End-Use Forecasting with EPRI-REEPS 2.1: Summary Input Assumptions and Results  

E-Print Network (OSTI)

LPG Furnace Oil Furnace Electric Heat Pump Gas BoilerOil Boiler Electric Room Heater Gas Room Heater Wood Stove (Electric Heat Pump Gas Boiler Oil Boiler Electric Room Gas

Koomey, Jonathan G.

2010-01-01T23:59:59.000Z

455

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

81 - 890 of 8,172 results. 81 - 890 of 8,172 results. Rebate Cheyenne Light, Fuel and Power (Gas)- Commercial and Industrial Efficiency Rebate Program (Wyoming) Cheyenne Light, Fuel and Power (CLFP) offers incentives to commercial and industrial gas customers who install energy efficient equipment in existing buildings. Incentives are available for boilers... http://energy.gov/savings/cheyenne-light-fuel-and-power-gas-commercial-and-industrial-efficiency-rebate-program Rebate Clean-Burning Wood Stove Grant Program (Maryland) The Maryland Energy Administration (MEA) now offers the Clean Burning Wood Stove Grant program as part of its Residential Clean Energy Grant Program. The Clean Burning Wood Stove Grant program... http://energy.gov/savings/clean-burning-wood-stove-grant-program-maryland

456

www.eia.gov  

U.S. Energy Information Administration (EIA)

... Sec Ht Eqp Built-in room heater burning,4,20,Numeric WOODKILN,Sec Ht Eqp Heating stove burning wood coal coke,4,21,Numeric CARRYEL,Sec Ht Eqp ...

457

PROJECTS FROM FEDERAL REGION IX DEPARTMENT OF ENERGY APPROPRIATE ENERGY TECHNOLOGY PROGRAM PART II  

E-Print Network (OSTI)

wood- stove; active solar domestic hot water and space heating; andheating system, and the builders have installed plumbing for a Hydrostove, water circulating woodwood heat. A complete list of alternative technologies incorporated within the house includes: passive solar heating and

Case, C.W.

2012-01-01T23:59:59.000Z

458

Question of the Week: What are Your Greatest Energy Concerns...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

thoughts. The cost of fuel oil is so expensive and winter is fast approaching. I have a wood stove to supplement the oil furnace, but the cost of firewood is going up as well. If...

459

The Woodrow Wilson School of Public and International Affairs Princeton University  

E-Print Network (OSTI)

on traditional and pre-industrial sources of energy, such as wood-burning cook stoves and other forms of biomass significantly from energy scarcity, forcing people to rely on traditional biomass as their primary energy source

Mauzerall, Denise

460

Wood Cofiring in a Cyclone Boiler at TVA's Allen Fossil Plant  

Science Conference Proceedings (OSTI)

Tests in a 272-MW cyclone boiler show that cofiring wood waste in the form of sawdust and small chips with coal is possible in a stable and routine operation. This report presents biomass data for five series of tests conducted from 1994 through 1996 and an analysis of the NOx reduction achieved.

1997-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Woodfuel community heating at Kielder A wood-fired district heating  

E-Print Network (OSTI)

Woodfuel community heating at Kielder A wood-fired district heating system, one of the first of its-fired district heating system was installed in 2004 as a practical low-carbon solution to providing heat and hot 2010. Contact for further information: Graham Gill (graham.gill@forestry.gsi.gov.uk) District heating

462

National Woodfuels and Wood Energy Information Analysis Prepared by: Muhammad Iqbal Sial PhD  

E-Print Network (OSTI)

2nd Draft Desk Study on National Woodfuels and Wood Energy Information Analysis PAKISTAN Prepared. FUELWOOD TRANSPORT, TRADE AND MARKETING 14 4.1. Collection 14 4.1.1. For household use 14 4.4.2. Wholesalers 18 4.4.3. Retailers 28 4.5. Woodfuel marketing 19 5. CONTRIBUTION OF WOODFUELS TO COUNTRY'S TOTAL

463

National Woodfuels and Wood Energy Information Analysis Prepared by: Koh Mok Poh  

E-Print Network (OSTI)

Desk Study on National Woodfuels and Wood Energy Information Analysis MALAYSIA Prepared by: Koh Mok.(Hoi, 1991) With the urbanisation of the population and an increasing standard of living, the energy shift firewood and charcoal industry. The Firewood Industry and Market The utilisation of bakau (mangrove

464

Property:Building/SPPurchasedEngyForPeriodMwhYrWoodChips | Open Energy  

Open Energy Info (EERE)

SPPurchasedEngyForPeriodMwhYrWoodChips SPPurchasedEngyForPeriodMwhYrWoodChips Jump to: navigation, search This is a property of type String. Wood chips Pages using the property "Building/SPPurchasedEngyForPeriodMwhYrWoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 +

465

Property:Building/SPPurchasedEngyNrmlYrMwhYrWoodChips | Open Energy  

Open Energy Info (EERE)

SPPurchasedEngyNrmlYrMwhYrWoodChips SPPurchasedEngyNrmlYrMwhYrWoodChips Jump to: navigation, search This is a property of type String. Wood chips Pages using the property "Building/SPPurchasedEngyNrmlYrMwhYrWoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 +

466

Property:Building/SPPurchasedEngyPerAreaKwhM2WoodChips | Open Energy  

Open Energy Info (EERE)

WoodChips WoodChips Jump to: navigation, search This is a property of type String. Wood chips Pages using the property "Building/SPPurchasedEngyPerAreaKwhM2WoodChips" Showing 25 pages using this property. (previous 25) (next 25) S Sweden Building 05K0001 + 0.0 + Sweden Building 05K0002 + 0.0 + Sweden Building 05K0003 + 0.0 + Sweden Building 05K0004 + 0.0 + Sweden Building 05K0005 + 0.0 + Sweden Building 05K0006 + 0.0 + Sweden Building 05K0007 + 0.0 + Sweden Building 05K0008 + 0.0 + Sweden Building 05K0009 + 0.0 + Sweden Building 05K0010 + 0.0 + Sweden Building 05K0011 + 0.0 + Sweden Building 05K0012 + 0.0 + Sweden Building 05K0013 + 0.0 + Sweden Building 05K0014 + 0.0 + Sweden Building 05K0015 + 0.0 + Sweden Building 05K0016 + 0.0 + Sweden Building 05K0017 + 0.0 +

467

Honey Lake hybrid geothermal wood residue power plant, Lassen County, California  

DOE Green Energy (OSTI)

The feasibility of a proposed 50 MW (gross) electric power project located near Wendel, California about 25 miles east of Susanville was studied. The project would be the first commercial power plant to combine the use of geothermal energy and wood fuel for power production. Wood fuel consisting primarily of various forms of forest management residues would be processed and partially dehydrated with geothermal energy prior to combustion. Geothermal energy would also be used for boiler feedwater heating and combustion air preheating. The study defines the range of site-specific benefits and economics of using wood fuel and moderate temperature geothermal energy, both of which are abundant and often located in proximity at many locations in the western United States. The study results document conclusively that overall project economics can be very favorable and that in addition to providing an important source of electric power, many benefits to forest land managers, local communities, project developers and the state of the environment can be derived from the combined use of moderate temperature geothermal energy and wood fuel.

Not Available

1982-06-01T23:59:59.000Z

468

Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood  

E-Print Network (OSTI)

the report titled: New Lines of CCA-Treated Wood Research, In-Service and Disposal Issues Which was finalized 13 Street, Suite D Gainesville, FL 32609 Excerpts from Report #00-12 #12;This page left intentionally.S. Environmental Protection Agency UV Ultra Violet UV/Vis Ultra Violet ­ Visible Light Region WET Waste Extraction

Florida, University of

469

International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007  

E-Print Network (OSTI)

consumption, e.g. China ­ Nuclear safety #12;International Conference on Wood-based Bioenergy LIGNA ­ European Union & member countries · 20% renewable energy target in 2020 ­ United States' government lagging: NTC Photo: Stora Enso Photo: Stora Enso EU renewable energy 2005 Germany, 4.8% European Union, 6

470

Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint  

DOE Patents (OSTI)

A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350 and 375 C to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan. 2 figs.

Moens, L.

1995-07-11T23:59:59.000Z

471

Where Wood Works Harnessing the Energy of Woody Biomass in Colorado  

E-Print Network (OSTI)

. Many coal-fired power plants can be adapted to use a blend of wood chips and coal, a process called "co by a central combined heat and power (CHP) power plant fueled by 80% biomass. The system produces up to 25 MW are needed. Heat Energy Measurements. A Btu (British Thermal Unit) is a common measurement of heat. About 1

472

36.258 UE -Woods calibrates instru-ment on NASA's new solar observa-  

E-Print Network (OSTI)

the stored magnetic energy is converted and released into the heliosphere and geospace in the form of solar University, University of Puerto Rico, University of Wyoming, Virginia Tech, and College of Menominee Nation36.258 UE - Woods calibrates instru- ment on NASA's new solar observa- tory. Photosby

Christian, Eric

473

Economic impacts of wood energy in the Northeast, 1985: State report: Northeast Regional Biomass Program  

DOE Green Energy (OSTI)

This report summarizes the economic impacts of wood energy for the 11 Northeastern states. The report begins with a brief description of the types of economic impacts estimated in the study. The direct economic impacts are the jobs and income directly attributable to wood energy activities. They are referred to as first round impacts since they reflect the economic activity generated by the first spending of the fuelwood dollar, from the consumer to the supplier. Direct impacts include employment in logging, transport, and end-use operations such as chimney sweeping and boiler operating. Direct impacts also include personal income to employees, payments of stumpage fees to landowners, and profits earned by fuelwood enterprises. Indirect employment and income result from purchases made by fuelwood supply businesses, purpose made by the employees of fuelwood supply businesses, and purchases made by wood burning households or companies for wood combustion system installation, construction, and maintenance. They include purchases of equipment, spare parts, supplies, and services, including financial services.

Chamberlin, R.; High, C.

1986-05-01T23:59:59.000Z

474

Restricted-Orientation Convexity in Higher-Dimensional Spaces Eugene Fink Derick Wood  

E-Print Network (OSTI)

Restricted-Orientation Convexity in Higher-Dimensional Spaces Eugene Fink Derick Wood University of Waterloo, Waterloo, Ont., Canada N2L3G1 {efink, dwood}@violet.waterloo.edu ABSTRACT A restricted-oriented convex set is a set whose intersection with any line from a fixed set of orientations is either empty

Fink, Eugene

475

Bioenergy and Wood Fiber in Virginia and Beyond John F. Munsell  

E-Print Network (OSTI)

­ Grayson County and others · Northern Virginia ­ Municipal Waste · Bio-fuels / Ethanol Goals ­ VA Energy energy productiongy p · 9% renewable: 47% biomass: 72% wood-based 17.00% 9.00% 31.00% 2% Wind 45% Hydroelectric 11.00% Petroleum Renewable Energy Nuclear Electric Hydroelectric 5% Geothermal 47% 32.00% Coal

Wynne, Randolph H.

476

Slovak Centre of Biomass Use for Energy Wood Fired Heating Plant in Slovakia  

E-Print Network (OSTI)

Slovak Centre of Biomass Use for Energy Slovakia 1 Wood Fired Heating Plant in Slovakia Energy energy User behaviour ESCOs Biomass Education Architects and engineers Wind Other Financial institutions;Slovak Centre of Biomass Use for Energy Slovakia 2 Biomass is considered as the most perspective

477

Slovak Centre of Biomass Use for Energy Wood Fired Heating Plant in Slovakia  

E-Print Network (OSTI)

Slovak Centre of Biomass Use for Energy Slovakia 1 Wood Fired Heating Plant in Slovakia Energy energy User behaviour ESCOs Biomass Education Architects and engineers Wind Other Financial institutions countries it is already implemented for several years. #12;Slovak Centre of Biomass Use for Energy Slovakia

478

Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Bilers  

E-Print Network (OSTI)

Coal and wood co-fired boiler technology has improved significantly over the years. The term "co-firing", when used by members of the biomass or utility communities, has come to mean mixing a modest amount of clean, dry sawdust with coal and burning the sawdust coal mixture in a large, coal-burning, utility boiler. This paper discusses the development of a computer software system that interacts with the user and allows coal-wood co-fired boilers to be sized, priced, implemented, and operated properly. Information about the equipment that is required for the boiler replacement project is provided. Along with these features, the software would allow the user to determine energy and cost savings that would be available upon installation as compared to other types of boilers. The paper outlines how these savings are realized, and the steps that must be taken to ensure the proper operation of the boiler to achieve these savings. A sensitivity analysis has also been performed on the implementation of coal-wood co-fired boilers in order to determine the key factors influencing the project payback period. The key factors that are considered in the analysis are the boiler size, the annual operating hours, and the current fuel cost. Additional analysis has been done on the boiler size and the annual operating hours. This analysis allows the users to determine if their current facility falls into the feasible range for implementing a coal-wood co-fired boiler system.

Gopalakrishnan, B.; Gump, C. D.; Gupta, D. P.; Chaudhari, S.

2013-01-01T23:59:59.000Z

479

Design of experiments: production of CO2from aquilariella malaccensis woods via pyrolysis-combustion process  

Science Conference Proceedings (OSTI)

CO2 is the main source used in conventional radiocarbon dating to estimate the age of the archaeological wood. However, the production of CO2 by combustion for conventional radiocarbon dating normally produces minimal amounts of ... Keywords: CO2 production, design of experiment, pyrolysis-combustion

A. Othman; S. K. Kamarudin; Z. Yaakob; S. R. S. Abdullah; A. Zaharim

2008-11-01T23:59:59.000Z

480

Review and analysis of emissions data for residential wood-fired central furnaces  

SciTech Connect

The paper reviews data published over the past 10--15 years on domestic wood-fired central heaters. Emphasis is on stick-fired units, the most common type used in the US, but also presented are data on chip- and pellet-fired units, showing that they are capable of achieving lower emissions.

McCrillis, R.C.

1998-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "wood stove deduction" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The potential for Eucalyptus as a wood fuel in the UK A.D. Leslie a,  

E-Print Network (OSTI)

The potential for Eucalyptus as a wood fuel in the UK A.D. Leslie a, , M. Mencuccini b,1 , M. Perks for utilising woody biomass, grown under short rotation forestry management systems, to produce electricity or heat. There are benefits to using biomass in generating heat and power the main environmental benefit

Mencuccini, Maurizio

482

Brazil closes down illegal timber operation, seizes wood Rhett A. Butler, mongabay.com  

E-Print Network (OSTI)

Brazil closes down illegal timber operation, seizes wood Rhett A. Butler, mongabay.com April 11 efforts. Deforestation Figures for Brazil, 1978-2005 Brazil's environmental regulations require landowners Newsletter Languages SUPPORT Help support mongabay.com when you buy from Brazil closes down illegal timber

483

Schoenberg, Chang, Pompa, Woods, Xu. Burning Index. 1 RH: Burning index in Los Angeles  

E-Print Network (OSTI)

Schoenberg, Chang, Pompa, Woods, Xu. Burning Index. 1 RH: Burning index in Los Angeles A Critical Assessment of the Burning Index in Los Angeles County, California Frederic Paik SchoenbergA,E , Chien: The effectiveness of the Burning Index (BI) in predicting wildfire ac- tivity is assessed using 25 years of area

Schoenberg, Frederic Paik (Rick)

484

Schoenberg, Chang, Keeley, Pompa, Woods, Xu. Burning Index. 1 RH: Burning index in Los Angeles  

E-Print Network (OSTI)

Schoenberg, Chang, Keeley, Pompa, Woods, Xu. Burning Index. 1 RH: Burning index in Los Angeles A Critical Assessment of the Burning Index in Los Angeles County, California Frederic Paik Schoenberg: The effectiveness of the Burning Index (BI) in predicting wildfire ac- tivity is assessed using 25 years of area

Schoenberg, Frederic Paik (Rick)

485

Analytical Modeling of Wood Frame Shear Walls Subjected to Vertical Load  

E-Print Network (OSTI)

A nonlinear automated parameter fitted analytical model that numerically predicts the load-displacement response of wood frame shear walls subjected to static monotonic loading with and without vertical load is presented. This analytical model referred to as Analytical Model of wood frame SHEar walls subjected to Vertical load (AMSHEV) is based on the kinematic behavior of wood frame shear walls and captures significant characteristics observed from experimental testing through appropriate modeling of three failure mechanisms that can occur within a shear wall under static monotonic load: 1) failure of sheathing-to-framing connectors, 2) failure of vertical studs, and 3) uplift of end studs from bottom sill. Previous models have not accounted for these failure mechanisms as well as the inclusion of vertical load, which has shown to reveal beneficial effects such as increasing the ultimate load capacity and limiting uplift of the wall as noted in experimental tests. Results from the proposed numerical model capture these effects within 7% error of experimental test data even when different magnitudes of vertical load are applied to predict the ultimate load capacity of wood frame shear walls.

Nguyendinh, Hai

2011-05-01T23:59:59.000Z

486

Approximate eigensolutions of the deformed Woods-Saxon potential via AIM  

E-Print Network (OSTI)

By using the Pekeris approximation, the Schr\\"{o}dinger equation is solved for the nuclear deformed Woods-Saxon potential within the framework of the asymptotic iteration method (AIM). The energy levels are worked out and the corresponding normalized eigenfunctions are obtained in terms of hypergeometric function.

Sameer M. Ikhdair; Babatunde James Falaye; Majid Hamzavi

2013-07-31T23:59:59.000Z

487

Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint  

DOE Patents (OSTI)

A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350.degree. and 375.degree. C. to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan.

Moens, Luc (Lakewood, CO)

1995-01-01T23:59:59.000Z

488

Creosote-treated wood poles and crossarms: Toxicity Characteristic Leaching Procedure (TCLP) results  

Science Conference Proceedings (OSTI)

The objective of this study was to develop a quantitative database on leachable concentrations of cresols (i.e., m-, o- and p-cresol isomers) from a population of creosote-treated utility wood poles and crossarms by application of the Toxicity Characteristic Leaching Procedure (TCLP). The TCLP was promulgated by the US Environmental Protection Agency (EPA) in March 1990 (55FR 11798). Data generated in this study indicate that creosote-treated utility poles and crossarms are non-hazardous. Measured concentrations of total cresols and other semi-volatile organic compounds, from wood subjected to TCLP analysis, were an order of magnitude or more below their current Toxicity Characteristic (TC) regulatory levels. The wood analyzed in this study consisted of 54 samples of wood poles and 6 crossarms. Subsamples, removed from full cross sectional slices of poles and crossarms, were prepared according to EPA procedures, subjected to the TCLP, and the resultant leachates analyzed for the presence of cresols and other semi-volatile compounds.

Horn, M.E. (Environmental Management Services, Waupaca, WI (United States)); Holcombe, L.; Owens, J.B. (Radian Corp., Austin, TX (United States))

1992-07-01T23:59:59.000Z

489

New Lines of CCA-Treated Wood Research: In-Service and Disposal Issues  

E-Print Network (OSTI)

, and Cr from 1, 100-g Block Figure IV.7 TCLP Extraction Results for As, Cu, and Cr from Sawdust Figure IV.8 TCLP Extraction Results for As, Cu, and Cr from Chipped Wood Figure IV.9 TCLP Extraction Results for As, Cu, and Cr from 5 20-g Blocks Figure IV.10 TCLP Extraction Results for As, Cu, and Cr from 100-g

Florida, University of