Sample records for wood kilograms kg

  1. Scalability, scintillation readout and charge drift in a kilogram scale solid xenon particle detector

    E-Print Network [OSTI]

    Yoo, J; Jaskierny, W F; Markley, D; Pahlka, R B; Balakishiyeva, D; Saab, T; Filipenko, M

    2014-01-01T23:59:59.000Z

    We report a demonstration of the scalability of optically transparent xenon in the solid phase for use as a particle detector above a kilogram scale. We employ a liquid nitrogen cooled cryostat combined with a xenon purification and chiller system to measure the scintillation light output and electron drift speed from both the solid and liquid phases of xenon. Scintillation light output from sealed radioactive sources is measured by a set of high quantum efficiency photomultiplier tubes suitable for cryogenic applications. We observed a reduced amount of photons in solid phase compared to that in liquid phase. We used a conventional time projection chamber system to measure the electron drift time in a kilogram of solid xenon and observed faster electron drift speed in the solid phase xenon compared to that in the liquid phase.

  2. Performance oriented packaging testing of nine Mk 3 Mod 0 signal containers in PPP-B-621 wood box for packing group II solid hazardous materials. Final report

    SciTech Connect (OSTI)

    Libbert, K.J.

    1992-10-01T23:59:59.000Z

    A PPP-B-621 wood box containing nine Mk 3 Mod 0 Signal containers was tested for conformance to Performance Oriented Packaging criteria established by Code of Federal Regulations Title 49 CFR. The container was tested with a gross weight of 123.3 pounds (56 kilograms) and met all requirements.

  3. Residential Wood Residential wood combustion (RWC) is

    E-Print Network [OSTI]

    Residential Wood Combustion Residential wood combustion (RWC) is increasing in Europe because PM2.5. Furthermore, other combustion- related sources of OA in Europe may need to be reassessed. Will it affect global OA emission estimates? Combustion of biofuels is globally one of the major OA sources

  4. MASS AND DENSITY 1 kg = 2.2046 lb 1 lb = 0.4536 kg

    E-Print Network [OSTI]

    Kostic, Milivoje M.

    .m = 0.73756 ft.lbf 1 ft.lbf = 1.35582 J 1 kJ = 737.56 ft.lbf 1 Btu = 778.17 ft.lbf 1 kJ = 0.9478 Btu 1 Btu = 1.0551 kJ 1 kJ/kg = 0.42992 Btu/lb 1 Btu/lb = 2.326 kJ/kg 1 kcal = 4.1868 kJ ENERGY TRANSFER RATE 1 W = 1 J/s = 3.413 Btu/h 1 Btu/h = 0.293 W 1kW = 1.341 hp 1 hp =2545 Btu/h 1 hp = 550 ft.lbf/s 1

  5. Wood Resources International

    E-Print Network [OSTI]

    .3% Sweden 5.3% Finland 4.1% Russia 13.8% US 37.3% Germany 3.3% France 2.8% Poland 2.1% Other Europe 14 International Wood Fuel Removals in Europe 2002 Turkey 12.2% Poland 3.6% Romania 5.3% Hungary 4.1% Germany 7;Wood Resources International Production of energy from wood fuels in 2000 Source: EUBIONET 0 50 100 150

  6. James F. Wood

    Broader source: Energy.gov [DOE]

    James F. Wood is currently Deputy Assistant Secretary for Clean Coal in the Office of Fossil Energy (FE). In this position, he is responsible for the management and direction of the Office's...

  7. Precision wood particle feedstocks

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2013-07-30T23:59:59.000Z

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  8. Laboratory Reports for the Development of a Chemical Stain to Identify Arsenic-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    A-1 APPENDIX A Laboratory Reports for the Development of a Chemical Stain to Identify Arsenic-Treated CCA-Treated, 9.6 kg/m3 CCA-Treated, 40 kg/m3 CCA-Treated, and Weathered Wood. · Group 1 ­ Blank o

  9. WOOD PRODUCTS AND UTILIZATION

    E-Print Network [OSTI]

    Standiford, Richard B.

    not require extensive cultivation and extraction methods, and it uses less manmade energy to manufacture, these trees are a vital component of wildlife and plant ecosystems, water quality, recreation, and esthetic and firewood harvesting are two activities that consume large quantities of wood from oak woodlands. Finding

  10. Rheological Model for Wood

    E-Print Network [OSTI]

    Mohammad Masoud Hassani; Falk K. Wittel; Stefan Hering; Hans J. Herrmann

    2014-10-15T23:59:59.000Z

    Wood as the most important natural and renewable building material plays an important role in the construction sector. Nevertheless, its hygroscopic character basically affects all related mechanical properties leading to degradation of material stiffness and strength over the service life. Accordingly, to attain reliable design of the timber structures, the influence of moisture evolution and the role of time- and moisture-dependent behaviors have to be taken into account. For this purpose, in the current study a 3D orthotropic elasto-plastic, visco-elastic, mechano-sorptive constitutive model for wood, with all material constants being defined as a function of moisture content, is presented. The corresponding numerical integration approach, with additive decomposition of the total strain is developed and implemented within the framework of the finite element method (FEM). Moreover to preserve a quadratic rate of asymptotic convergence the consistent tangent operator for the whole model is derived. Functionality and capability of the presented material model are evaluated by performing several numerical verification simulations of wood components under different combinations of mechanical loading and moisture variation. Additionally, the flexibility and universality of the introduced model to predict the mechanical behavior of different species are demonstrated by the analysis of a hybrid wood element. Furthermore, the proposed numerical approach is validated by comparisons of computational evaluations with experimental results.

  11. (Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2009. One company in Utah

    E-Print Network [OSTI]

    58 GALLIUM (Data in kilograms of gallium content unless otherwise noted) Domestic Production 98% of domestic gallium consumption. About 67% of the gallium consumed was used in integrated and Use: No domestic primary gallium recovery was reported in 2009. One company in Utah recovered

  12. (Data in kilograms of gallium content unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 2005. One company in Utah

    E-Print Network [OSTI]

    66 GALLIUM (Data in kilograms of gallium content unless otherwise noted) Domestic Production, [(703) 648-7719, dkramer@usgs.gov, fax: (703) 648-7975] #12;67 GALLIUM Consolidation of companies and Use: No domestic primary gallium recovery was reported in 2005. One company in Utah recovered

  13. (Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1998. Two companies in

    E-Print Network [OSTI]

    66 GALLIUM (Data in kilograms of gallium content, unless otherwise noted) Domestic Production A. Kramer [(703) 648-7719, dkramer@usgs.gov, fax: (703) 648-7722] #12;67 GALLIUM Events, Trends and Use: No domestic primary gallium recovery was reported in 1998. Two companies in Oklahoma and Utah

  14. (Data in kilograms of gallium content, unless otherwise noted) Domestic Production and Use: No domestic primary gallium recovery was reported in 1996. Two companies in

    E-Print Network [OSTI]

    on world production of primary gallium were unavailable because data on the output of the few producers62 GALLIUM (Data in kilograms of gallium content, unless otherwise noted) Domestic Production in optoelectronic devices, which include light-emitting diodes (LED's), laser diodes, photodetectors, and solar

  15. Dark matter limits froma 15 kg windowless bubble chamber

    SciTech Connect (OSTI)

    Szydagis, Matthew Mark; /Chicago U.

    2010-12-01T23:59:59.000Z

    The COUPP collaboration has successfully used bubble chambers, a technology previously applied only to high-energy physics experiments, as direct dark matter detectors. It has produced the world's most stringent spin-dependent WIMP limits, and increasingly competitive spin-independent limits. These limits were achieved by capitalizing on an intrinsic rejection of the gamma background that all other direct detection experiments must address through high-density shielding and empirically-determined data cuts. The history of COUPP, including its earliest prototypes and latest results, is briefly discussed in this thesis. The feasibility of a new, windowless bubble chamber concept simpler and more inexpensive in design is discussed here as well. The dark matter limits achieved with a 15 kg windowless chamber, larger than any previous COUPP chamber (2 kg, 4 kg), are presented. Evidence of the greater radiopurity of synthetic quartz compared to natural is presented using the data from this 15 kg device, the first chamber to be made from synthetic quartz. The effective reconstruction of the three-dimensional positions of bubbles in a highly distorted optical field, with ninety-degree bottom lighting similar to cloud chamber lighting, is demonstrated. Another innovation described in this thesis is the use of the sound produced by bubbles recorded by an array of piezoelectric sensors as the primary means of bubble detection. In other COUPP chambers, cameras have been used as the primary trigger. Previous work on bubble acoustic signature differentiation using piezos is built upon in order to further demonstrate the ability to discriminate between alpha- and neutron-induced events.

  16. FAO Forestry Department Wood Energy WISDOM Slovenia

    E-Print Network [OSTI]

    in developing pellet production and district heating systems; the formulation of a national wood energy strategyFAO Forestry Department Wood Energy WISDOM Slovenia Spatial woodfuel production Rudi Drigo Forestry Specialist - Wood energy planning and forest resources monitoring Zivan Veseli

  17. DIVISION 6 -WOOD AND PLASTICS 06000 GENERAL

    E-Print Network [OSTI]

    DIVISION 6 - WOOD AND PLASTICS ________________________________________________________________________ 06000 GENERAL 1. For both woods and plastics, special attention is called to matters of flame spread-dried. 3. For exterior wood or plastic framed structures, see Division 4 for dimensions of Sample Panel

  18. Schnell Z ndstrahlmotoren AG Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump638324°,Schnell Z ndstrahlmotoren AG Co KG Jump

  19. Leopold Kostal GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin Zhongdiantou NewKoreaLaorLeopold Kostal GmbH Co KG Jump to:

  20. Campa Sud GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof EnergyInnovation inOpen EnergyCallaway ElectricCambridge FundsCampa Sud GmbH Co KG

  1. Beverly Woods | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beverly Woods Beverly Woods Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake...

  2. Environmental Impacts of Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Environmental Impacts of Treated Wood 6495_C000.fm Page iii Wednesday, February 1, 2006 5:48 PM #12 through the Florida Center for Environmental Solutions, National Science Foundation Grant No. 0126172. Any of treated-wood research and their efforts in organizing the con- ference entitled Environmental Impacts

  3. The Asian Wood Pellet Markets

    E-Print Network [OSTI]

    The Asian Wood Pellet Markets Joseph A. Roos and Allen M. Brackley United States Department Wood Pellet plant in North Pole, Alaska. Clockwise from upper left: pelleting machine; pellets bagged for home use; a Superior Pellet Fuels bag; inventory of product ready for shipment to retailers. Upper

  4. GLOBAL WOOD SUPPLY Sten Nilsson

    E-Print Network [OSTI]

    GLOBAL WOOD SUPPLY Sten Nilsson Biomass and Resource Efficiency: the need for a supply led approach the wood come from? Western EU Deficit Eastern EU Deficit Rest of Eastern Europe Balanced Russia Rest of Eastern Europe Balanced Russia Is probably at production ceiling under current conditions Japan

  5. Successful biomass (wood pellets ) implementation in

    E-Print Network [OSTI]

    Successful biomass (wood pellets ) implementation in Estonia Biomass Utilisation of Local of primary energy in Estonia ! Wood fuels production ! Pellet firing projects in Estonia ­ SIDA Demo East Production of wood fuels in Estonia in 2002 Regional Energy Centres in Estonia Wood pellets production

  6. Wood Fuel Task Force Response 2 | Wood Fuel Task Force Response

    E-Print Network [OSTI]

    Wood Fuel Task Force Response #12;2 | Wood Fuel Task Force Response #12;Wood Fuel Task Force Response | 3 Wood Fuel Task Force Response Scottish Government response by Minister for Environment, Michael Russell I am pleased to present on behalf of the Scottish Government our response to the Wood Fuel

  7. Textile Drying Via Wood Gasification

    E-Print Network [OSTI]

    McGowan, T. F.; Jape, A. D.

    1983-01-01T23:59:59.000Z

    This project was carried out to investigate the possibility of using wood gas as a direct replacement for natural gas in textile drying. The Georgia Tech updraft gasifier was used for the experimental program. During preliminary tests, the 1 million...

  8. Textile Drying Via Wood Gasification

    E-Print Network [OSTI]

    McGowan, T. F.; Jape, A. D.

    1983-01-01T23:59:59.000Z

    This project was carried out to investigate the possibility of using wood gas as a direct replacement for natural gas in textile drying. The Georgia Tech updraft gasifier was used for the experimental program. During preliminary tests, the 1 million...

  9. Integrated Industrial Wood Chip Utilization

    E-Print Network [OSTI]

    Owens, E. T.

    1984-01-01T23:59:59.000Z

    The sources of supply of wood residues for energy generation are described and the rationale for exploring the potential available from forest harvesting is developed. Details of three industrial-scale projects are presented and the specific...

  10. QUALITY OF WOOD PELLETS PRODUCED IN BRITISH COLUMBIA FOR EXPORT

    SciTech Connect (OSTI)

    Tumuluru, J.S. [Idaho National Laboratory (INL); Sokhansanj, Shahabaddine [ORNL; Lim, C. Jim [University of British Columbia, Vancouver; Bi, X.T. [University of British Columbia, Vancouver; Lau, A.K. [University of British Columbia, Vancouver; Melin, Staffan [University of British Columbia, Vancouver; Oveisi, E. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver

    2010-11-01T23:59:59.000Z

    Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

  11. Quality of Wood Pellets Produced in British Columbia for Export

    SciTech Connect (OSTI)

    J. S. Tumuluru; S. Sokhansanj; C. J. Lim; T. Bi; A. Lau; S. Melin; T. Sowlati; E. Oveisi

    2010-11-01T23:59:59.000Z

    Wood pellet production and its use for heat and power production are increasing worldwide. The quality of export pellets has to consistently meet certain specifications as stipulated by the larger buyers, such as power utilities or as specified by the standards used for the non-industrial bag market. No specific data is available regarding the quality of export pellets to Europe. To develop a set of baseline data, wood pellets were sampled at an export terminal in Vancouver, British Columbia, Canada. The sampling period was 18 months in 2007-2008 when pellets were transferred from storage bins to the ocean vessels. The sampling frequency was once every 1.5 to 2 months for a total of 9 loading/shipping events. The physical properties of the wood pellets measured were moisture content in the range of 3.5% to 6.5%, bulk density from 728 to 808 kg/m3, durability from 97% to 99%, fines content from 0.03% to 0.87%, calorific value as is from 17 to almost 18 MJ/kg, and ash content from 0.26% to 0.93%.The diameter and length were in the range of 6.4 to 6.5 mm and 14.0 to 19.0 mm, respectively. All of these values met the published non-industrial European grades (CEN) and the grades specified by the Pellet Fuel Institute for the United States for the bag market. The measured values for wood pellet properties were consistent except the ash content values decreased over the test period.

  12. CHEMISTRY AND STOICHIOMETRY OF WOOD LIQUEFACTION

    E-Print Network [OSTI]

    Davis, H.G.

    2012-01-01T23:59:59.000Z

    analysis of the wood-oil product derived from the above2 g It is probable that oil products with oxygen contentscollected with the wood-oil product. The condensate contains

  13. Marin County- Wood Stove Replacement Rebate Program

    Broader source: Energy.gov [DOE]

    The County of Marin has created a rebate program to encourage homeowners to remove or replace non-EPA certified wood-burning heaters (wood stoves and fireplace inserts) with cleaner burning stoves...

  14. Leonard Wood and the American Empire

    E-Print Network [OSTI]

    Pruitt, James Herman

    2012-07-16T23:59:59.000Z

    During the ten years following the Spanish American War (1898 to 1908), Major General Leonard Wood served as the primary agent of American imperialism. Wood was not only a proconsul of the new American Empire; he was a ...

  15. Structure-Infesting Wood-Boring Beetles

    E-Print Network [OSTI]

    Jackman, John A.

    2006-03-28T23:59:59.000Z

    Several kinds of beetles damage stored wood, structural timbers and other wood products. This publication explains how to detect, identify, prevent and control powderpost beetle, old house borer and others....

  16. Decreasing the leachibility of boron wood preservatives

    E-Print Network [OSTI]

    Gezer, Engin Derya

    1996-01-01T23:59:59.000Z

    The use of boron in wood preservatives has been growing since the 1930s, primarily in various boric acid/borax mixtures. Boron preservatives have several advantages for application as wood preservatives including a broad spectrum of activity...

  17. Emerging Technologies in Wood Energy Wood can already be used to produce heat and

    E-Print Network [OSTI]

    established technologies of District Energy and Combined Heat and Power plants. Using wood to makeEmerging Technologies in Wood Energy Wood can already be used to produce heat and electricity using such as flooring and siding. In Europe, torrefaction has been explored to produce an improved wood pellet

  18. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  19. Optical computing Damien Woods a

    E-Print Network [OSTI]

    Woods, Damien

    Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract In this survey we consider optical computers of such optical computing archi- tectures, including descriptions of the type of hardware commonly used in optical

  20. Optical computing Damien Woods a

    E-Print Network [OSTI]

    Woods, Damien

    Optical computing Damien Woods a aDepartment of Computer Science and Artificial Intelligence Institute, Vierimaantie 5, 84100 Ylivieska, Finland Abstract We consider optical computers that encode data using images and compute by transforming such images. We give an overview of a number of such optical

  1. Potential adverse health effects of wood smoke

    SciTech Connect (OSTI)

    Pierson, W.E.; Koenig, J.Q.; Bardana, E.J. Jr.

    1989-09-01T23:59:59.000Z

    The use of wood stoves has increased greatly in the past decade, causing concern in many communities about the health effects of wood smoke. Wood smoke is known to contain such compounds as carbon monoxide, nitrogen oxides, sulfur oxides, aldehydes, polycyclic aromatic hydrocarbons, and fine respirable particulate matter. All of these have been shown to cause deleterious physiologic responses in laboratory studies in humans. Some compounds found in wood smoke--benzo(a)pyrene and formaldehyde--are possible human carcinogens. Fine particulate matter has been associated with decreased pulmonary function in children and with increased chronic lung disease in Nepal, where exposure to very high amounts of wood smoke occurs in residences. Wood smoke fumes, taken from both outdoor and indoor samples, have shown mutagenic activity in short-term bioassay tests. Because of the potential health effects of wood smoke, exposure to this source of air pollution should be minimal.29 references.

  2. The conservation of waterlogged wood using sucrose

    E-Print Network [OSTI]

    Parrent, James Michael

    1983-01-01T23:59:59.000Z

    such as resins or creosote, which are 13 volatilized by heating, the standard methods for moisture determination yield false values (Panshin a de Zeeuw 1980:203). This should not be a problem when working with waterlogged wood since only small samples... water. Formation of hydrogen bonds releases energy which can be measured as the "heat of wetting" for dry wood. In turn, energy must be supplied to wet wood to remove any water that is present. 14 "The forces of attraction between dry wood and water...

  3. One on One- Douglas K Woods

    Broader source: Energy.gov [DOE]

    A September 2014 interview with Douglas K Woods, the President of the Association for Manufacturing Technology, on the state of US manufacturing.

  4. WoodPolymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood

    E-Print Network [OSTI]

    Wood­Polymer Composites Prepared by the In Situ Polymerization of Monomers Within Wood Yong-Feng Li in Wiley Online Library (wileyonlinelibrary.com). ABSTRACT: Wood­polymer composites (WPCs) were prepared words: composites; mechanical properties; modifi- cation; monomers; renewable resources INTRODUCTION

  5. Seneca Creek Associates, LLC Wood Resources International, LLC "Illegal" Logging and Global Wood Markets

    E-Print Network [OSTI]

    Seneca Creek Associates, LLC Wood Resources International, LLC "Illegal" Logging and Global Wood@aol.com; hekstrom@wri-ltd.com October, 2004 #12;Page ES - 1 Illegal Logging and Global Wood Markets: The Competitive, LLC Executive Summary Illegal logging has been high on the agenda, if not directly at the center

  6. Seneca Creek Associates, LLC Wood Resources International, LLC "Illegal" Logging and Global Wood Markets

    E-Print Network [OSTI]

    Seneca Creek Associates, LLC Wood Resources International, LLC SUMMARY "Illegal" Logging and Global Resources International, LLC Illegal Logging and Global Wood Markets: The Competitive Impacts on the U.S. Wood Products Industry1 Summary Study Objectives Illegal logging and illegal forest activities, in one

  7. Daniel Wood | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management Fermi SitePARTOfficeOctoberDaniel Wood About Us Daniel

  8. automatic wood furnaces: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    pressure differences that included standard rating points 11 Wood Products 201213 Student Handbook Environmental Sciences and Ecology Websites Summary: Wood Products 201213 Student...

  9. Autonomy for Aurora's Mars Missions Mark Woods,

    E-Print Network [OSTI]

    Fisher, Michael

    Autonomy for Aurora's Mars Missions Mark Woods, SciSys Ltd., Clothier Road, Bristol, UK BS4 5SS Email: mark.woods@scisys.co.uk Tel: +44 117 9717251 ESA's Aurora programme incorporates a strategy for European involvement in future robotic and human exploration of our Solar System. The Aurora roadmap calls

  10. Wood Burning Combined Cycle Power Plant

    E-Print Network [OSTI]

    Culley, J. W.; Bourgeois, H. S.

    1984-01-01T23:59:59.000Z

    A combined cycle power plant utilizing wood waste products as a fuel has been designed. This plant will yield a 50% efficiency improvement compared to conventional wood-fueled steam power plants. The power plant features an externally-fired gas...

  11. Leonard Wood and the American Empire

    E-Print Network [OSTI]

    Pruitt, James Herman

    2012-07-16T23:59:59.000Z

    During the ten years following the Spanish American War (1898 to 1908), Major General Leonard Wood served as the primary agent of American imperialism. Wood was not only a proconsul of the new American Empire; he was a symbol of the empire...

  12. Alaska Wood Biomass Energy Project Final Report

    SciTech Connect (OSTI)

    Jonathan Bolling

    2009-03-02T23:59:59.000Z

    The purpose of the Craig Wood Fired Boiler Project is to use waste wood from local sawmilling operations to provide heat to local public buildings, in an effort to reduce the cost of operating those buildings, and put to productive use a byproduct from the wood milling process that otherwise presents an expense to local mills. The scope of the project included the acquisition of a wood boiler and the delivery systems to feed wood fuel to it, the construction of a building to house the boiler and delivery systems, and connection of the boiler facility to three buildings that will benefit from heat generated by the boiler: the Craig Aquatic Center, the Craig Elementary School, and the Craig Middle School buildings.

  13. Disposal of CCA-treated Wood: An Evaluation of

    E-Print Network [OSTI]

    Florida, University of

    Disposal of CCA-treated Wood: An Evaluation of Existing and Alternative Management Options (FINAL CHARACTERISTICS OF CCA-TREATED WOOD ASH II.1 Sample Preparation 10 II.2 Laboratory Methods 15 II.3 Laboratory Results 24 CHAPTER III, SORTING TECHNOLOGIES FOR SEPARATING TREATED WOOD FROM UNTREATED WOOD III.1

  14. North American wood markets hit by United States housing crash North American wood markets hit by United States housing crash

    E-Print Network [OSTI]

    themes were: 1. softwood market developments, and 2. wood energy and wood mobilization. The main use of wood for energy throughout the UNECE region, driven by policy measures and high oil prices development, which will have to try to balance the needs of the established wood products sector and the bio-energy

  15. From the Woods to the Refinery

    Broader source: Energy.gov [DOE]

    Breakout Session 2DBuilding Market Confidence and Understanding II: Carbon Accounting and Woody Biofuels From the Woods to the Refinery Stephen S. Kelley, Principal and Department Head, Department of Forest Biomaterials, North Carolina State University

  16. Residential Wood Heating Fuel Exemption (New York)

    Broader source: Energy.gov [DOE]

    New York exempts retail sales of wood used for residential heating purposes from the state sales tax. The law also permits local governments (municipalities and counties) to grant an exemption from...

  17. Wood Fired Steam Plants in Georgia

    E-Print Network [OSTI]

    Bulpitt, W. S.

    1983-01-01T23:59:59.000Z

    suppliers. Based upon the designs submitted and subsequent negotiations, the Applied Engineering Company (APCO) in Orangeburg, South Carolina, was chosen to do the job. Applied Engineering has been working on wood gasification systems for several years...-20, 1983 company has a large manufacturing plant in Orange burg and is fully capable of fabricating large pressure vessels and heavy industrial equipment. The overall wood gasification system is shown in Figure 1. The fuel for the gasifier is green...

  18. A Wood-Fired Gas Turbine Plant

    E-Print Network [OSTI]

    Powell, S. H.; Hamrick, J. T.

    A WOOD-FIRED GAS TURBINE PLANT Sam H. Powell, Tennessee Valley Authority, Chattanooga, Tennessee Joseph T. Hamrick, Aerospace Research Corporation, RBS Electric, Roanoke, VA Abstract This paper covers the research and development of a wood...-fired gas turbine unit that is used for generating electricity. The system uses one large cyclonic combustor and a cyclone cleaning system in series to provide hot gases to drive an Allison T-56 aircraft engine (the industrial version is the 50l-k). A...

  19. Wurth Solar GmbH Co KG Wuerth Solar | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy ResourcesWoodsCenters5654°,Huagong TechWujiang

  20. European Panel FederationEuropean Panel Federation viewpoint on wood energy policiesviewpoint on wood energy policies

    E-Print Network [OSTI]

    --called "green energy"called "green energy" ·· Simultaneously, the taxes on the use of fossil fuelsSimultaneously, the taxes on the use of fossil fuels increaseincrease ·· This leads to increasing costs for wood productsIncreasing use of wood for energy production ·· Governments in Europe are granting subsidies for

  1. Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood

    E-Print Network [OSTI]

    Closed Loop Recycling of PreservativeClosed Loop Recycling of Preservative Treated WoodTreated Wood.2 million cubic meters) of lumber treated with CCA are produced annually in the United States (Micklewright 1998). ·In 1997, for example, some 581.4 million cu. ft. was treated with waterborne preservatives

  2. Fuel switching from wood to LPG can benefit the environment

    SciTech Connect (OSTI)

    Nautiyal, Sunil [Leibniz-Centre for Agricultural Landscape Research (ZALF), Institute of Socioeconomics, Eberswalder Str. 84, 15374 Muencheberg (Germany)], E-mail: sunil.nautiyal@zalf.de; Kaechele, Harald [Leibniz-Centre for Agricultural Landscape Research (ZALF), Institute of Socioeconomics, Eberswalder Str. 84, 15374 Muencheberg (Germany)

    2008-11-15T23:59:59.000Z

    The Himalaya in India is one of the world's biodiversity hotspots. Various scientific studies have reported and proven that many factors are responsible for the tremendous decline of the Himalayan forests. Extraction of wood biomass from the forests for fuel is one of the factors, as rural households rely entirely on this for their domestic energy. Efforts continue for both conservation and development of the Himalayan forests and landscape. It has been reported that people are still looking for more viable solutions that could help them to improve their lifestyle as well as facilitate ecosystem conservation and preservation of existing biodiversity. In this direction, we have documented the potential of the introduction of liquefied petroleum gas (LPG), which is one of the solutions that have been offered to the local people as a substitute for woodfuel to help meet their domestic energy demand. The results of the current study found dramatic change in per capita woodfuel consumption in the last two decades in the villages where people are using LPG. The outcome showed that woodfuel consumption had been about 475 kg per capita per year in the region, but after introduction of LPG, this was reduced to 285 kg per capita per year in 1990-1995, and was further reduced to 46 kg per capita per year in 2000-2005. Besides improving the living conditions of the local people, this transformation has had great environmental consequences. Empirical evidence shows that this new paradigm shift is having positive external effects on the surrounding forests. Consequently, we have observed a high density of tree saplings and seedlings in adjacent forests, which serves as an assessment indicator of forest health. With the help of the current study, we propose that when thinking about a top-down approach to conservation, better solutions, which are often ignored, should be offered to local people.

  3. Complete braided adsorbent for marine testing to demonstrate 3g-U/kg-adsorbent

    SciTech Connect (OSTI)

    Janke, Chris [ORNL; Yatsandra, Oyola [ORNL; Mayes, Richard [ORNL; none,; Gill, Gary [PNNL; Li-Jung, Kuo [PNNL; Wood, Jordana [PNNL; Sadananda, Das [ORNL

    2014-04-30T23:59:59.000Z

    ORNL has manufactured four braided adsorbents that successfully demonstrated uranium adsorption capacities ranging from 3.0-3.6 g-U/kg-adsorbent in marine testing at PNNL. Four new braided and leno woven fabric adsorbents have also been prepared by ORNL and are currently undergoing marine testing at PNNL.

  4. Version 3.0 SOP 2 --October 12, 2007 SOP 1 kg

    E-Print Network [OSTI]

    Version 3.0 SOP 2 -- October 12, 2007 37 SOP 2 1. SOP 1 kg . (1800-2300 mol ion) #12;October 12, 2007 SOP 2 -- Version 3.0 38 . . 2 2 2 2 2 2CO HO(CH ) NH HO . 0.4 . 1 : () (septum port) ( ); () - SOMMA . #12;Version 3.0 SOP 2

  5. Nuclear Car Wash sensitivity in varying thicknesses of wood and steel cargo

    SciTech Connect (OSTI)

    Church, J; Slaughter, D; Asztalos, S; Biltoft, P; Descalle, M; Hall, J; Manatt, D; Mauger, J; Norman, E; Petersen, D; Prussin, S

    2006-10-05T23:59:59.000Z

    The influence of incident neutron attenuation on signal strengths in the Nuclear Car Wash has been observed experimentally for both wood and steel-pipe mock cargos. Measured decay curves are presented for {beta}-delayed high-energy {gamma}-rays and thermalized neutrons following neutron-induced fission of HEU through varying irradiation lengths. Error rates are extracted for delayed-{gamma} and delayed-n signals integrated to 30 seconds, assuming Gaussian distributions for the active background. The extrapolation to a field system of 1 mA deuterium current and to a 5 kg sample size is discussed.

  6. Department of Forest and Wood Science Academic Programmes for 2014

    E-Print Network [OSTI]

    Geldenhuys, Jaco

    ; harvesting and supply; biomass conversion; energy production; marketing of bio-energy; economicsDepartment of Forest and Wood Science Academic Programmes for 2014 Postgraduate Diploma Enquiries: Head of Department Contact details: Department of Forest and Wood Science Stellenbosch University

  7. Trends and Market Effects of Wood Energy Policies

    E-Print Network [OSTI]

    Trends and Market Effects of Wood Energy Policies Bengt Hillring SLU SWEDEN http://www.unece.org/trade/timber/docs/tc-sessions/tc-61/presentations/10-hillring.pdf #12;Introduction Industrial use of wood fibre has increased Oil

  8. A study of the molecular mechanics of wood cell walls

    E-Print Network [OSTI]

    Adler, David, S.M. (David C.). Massachusetts Institute of Technology

    2013-01-01T23:59:59.000Z

    Wood is the original structural material, developed by nature to support tall plants. Every advantageous feature of wood as used in artificial structures is rooted in the plant's evolved capability to withstand the conditions ...

  9. Method of predicting mechanical properties of decayed wood

    DOE Patents [OSTI]

    Kelley, Stephen S.

    2003-07-15T23:59:59.000Z

    A method for determining the mechanical properties of decayed wood that has been exposed to wood decay microorganisms, comprising: a) illuminating a surface of decayed wood that has been exposed to wood decay microorganisms with wavelengths from visible and near infrared (VIS-NIR) spectra; b) analyzing the surface of the decayed wood using a spectrometric method, the method generating a first spectral data of wavelengths in VIS-NIR spectra region; and c) using a multivariate analysis to predict mechanical properties of decayed wood by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of wavelengths in VIS-NIR spectra obtained from a reference decay wood, the second spectral data being correlated with a known mechanical property analytical result obtained from the reference decayed wood.

  10. Assembly history dictates ecosystem functioning: evidence from wood decomposer communities

    E-Print Network [OSTI]

    Bruns, Tom

    ForReview Only Assembly history dictates ecosystem functioning: evidence from wood decomposer change, community assembly, ecosystem functioning, New Zealand Nothofagus (beech) forests, priority dictates ecosystem functioning: evidence from wood decomposer communities Tadashi Fukami1,2,3 , Ian A

  11. Clean-Burning Wood Stove Grant Program (Maryland)

    Broader source: Energy.gov [DOE]

    The Maryland Energy Administration (MEA) now offers the Clean Burning Wood Stove Grant program as part of its Residential Clean Energy Grant Program. The Clean Burning Wood Stove Grant program...

  12. Guide to Using Wood Ash as an Agricultural Soil Amendment

    E-Print Network [OSTI]

    New Hampshire, University of

    from larger commercial sources such as wood-burning biomass plants which produce heat or electricity in the soil. Wood ash is more soluble and reactive than ground limestone, and brings about a Benefits Recycles

  13. GTS Duratek, Phase I Hanford low-level waste melter tests: 100-kg melter offgas report

    SciTech Connect (OSTI)

    Eaton, W.C. [Westinghouse Hanford Co., Richland, WA (United States)] [Westinghouse Hanford Co., Richland, WA (United States)

    1995-11-01T23:59:59.000Z

    A multiphase program was initiated in 1994 to test commercially available melter technologies for the vitrification of the low-level waste (LLW) stream from defense wastes stored in underground tanks at the Hanford Site in southeastern Washington State. Phase 1 of the melter demonstration tests using simulated LLW was completed during fiscal year 1995. This document is the 100-kg melter offgas report on testing performed by GTS Duratek, Inc., in Columbia, Maryland. GTS Duratek (one of the seven vendors selected) was chosen to demonstrate Joule heated melter technology under WHC subcontract number MMI-SVV-384215. The document contains the complete offgas report on the 100-kg melter as prepared by Parsons Engineering Science, Inc. A summary of this report is also contained in the GTS Duratek, Phase I Hanford Low-Level Waste Melter Tests: Final Report (WHC-SD-WM-VI-027).

  14. International Trade of Wood Pellets (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2013-05-01T23:59:59.000Z

    The production of wood pellets has increased dramatically in recent years due in large part to aggressive emissions policy in the European Union; the main markets that currently supply the European market are North America and Russia. However, current market circumstances and trade dynamics could change depending on the development of emerging markets, foreign exchange rates, and the evolution of carbon policies. This fact sheet outlines the existing and potential participants in the wood pellets market, along with historical data on production, trade, and prices.

  15. The Storage and Seasoning of Pecan Bud Wood.

    E-Print Network [OSTI]

    Brison, Fred R. (Fred Robert)

    1933-01-01T23:59:59.000Z

    be returned to cold storage and will remain ready for use at a later date. It has been found that bud wood cut late in the dormant period seasons in a shorter time than that cut early. Bud wood of the Delmas variety seasons more readiIy than that of Stuart... _._-_._.--__..__------~-..._..--_...._.--_.....-. Relation of Time of Cutting Bud Wood to Seasoning ._.__....._._-___._------------ ., Relative Response of Stuart and Delmas in Seasoning _---..__._.__....._.---....-....--.- 10 Number of Days for Seasoning Bud Wood During Different Months .... 12 Storage...

  16. APPLIED ISSUES Effects of agriculture on wood breakdown and microbial

    E-Print Network [OSTI]

    Webster, Jackson R.

    creating the potential for recovery of ecosystem processes. 2. We examined wood breakdown and microbial breakdown. Wood may not be desirable as a tool for Correspondence: M. E. McTammany, Biology DepartmentAPPLIED ISSUES Effects of agriculture on wood breakdown and microbial biofilm respiration

  17. Landfill Disposal of CCA-Treated Wood with Construction and

    E-Print Network [OSTI]

    Florida, University of

    Landfill Disposal of CCA-Treated Wood with Construction and Demolition (C&D) Debris: Arsenic phased out of many residential uses in the United States, the disposal of CCA-treated wood remains. Catastrophic events have also led to the concentrated disposal of CCA-treated wood, often in unlined landfills

  18. Wood Fuel Future: The Potential Web Text December 2010

    E-Print Network [OSTI]

    Wood Fuel Future: The Potential Web Text 31st December 2010 Wood Fuel Future: The Potential Wood Fuel Future : The Potential Renewable Energy is a key part of our Energy Policy. This UK Government by 2020. This should reduce carbon emissions from fossil fuel by 60% by the year 2050. The Welsh Assembly

  19. Center for Wood Utilization Progress Report for Fiscal Year 2010

    E-Print Network [OSTI]

    Tullos, Desiree

    , Asia, and Latin America. A business plan was developed to capture 1% of the $2.5 billion h manufacturing; and (c) lead to more efficient use of renewable wood-based materials for the benefit of Americans. Renewable wood is essential to human existence. Wood utilization research is critical to national needs

  20. Wood Fired Steam Plants in Georgia

    E-Print Network [OSTI]

    Bulpitt, W. S.

    1983-01-01T23:59:59.000Z

    . Shortly after that time, Georgia Tech and the Georgia Forestry Commission embarked on a number of projects directed toward providing the use of wood as an industrial energy source. This paper will present an overview of these programs with an emphasis...

  1. Woods Safety SFRC UF 7/09

    E-Print Network [OSTI]

    Watson, Craig A.

    Woods Safety SFRC UF 7/09 #12;Working alone #12;Poison Plants Poison ivy (Toxicodendron radicans) Poison oak (Toxicodendron pubescens) #12;Commonly Mistaken Plants Virginia creeper (Parthenocissus quinquefolia) Blackberry (Rubus spp.) Three leaflets let it be! #12;Poison Ivy/Oak Prevention: Wear long

  2. Updated 1-12 Bryan H. Wood

    E-Print Network [OSTI]

    as an attorney with the Department of the Navy's Office of the General Counsel (OGC). Initially appointed as ONR Counsel in 2007, he was the first Navy OGC attorney to deploy to a combat zone in his civilian OGC Force-Horn of Africa (CJTF-HOA) in Djibouti, Africa. Mr. Wood began his career with Navy OGC

  3. A Wood-Fired Gas Turbine Plant

    E-Print Network [OSTI]

    Powell, S. H.; Hamrick, J. T.

    1986-01-01T23:59:59.000Z

    This paper covers the research and development of a wood-fired gas turbine unit that is used for generating electricity. The system uses one large cyclonic combustor and a cyclone cleaning system in series to provide hot gases to drive an Allison T...

  4. CORRUPTION AND ILLEGAL LOGGING IN THE WOOD

    E-Print Network [OSTI]

    Pettenella, Davide

    CORRUPTION AND ILLEGAL LOGGING IN THE WOOD PRODUCTS MARKET: the Italian experience in controlling Science 7 May 2004 Paper organization 1. State of the problem 2. Are Italian companies involved in deforestation and trade of illegal logging? 3. Which are the most affected countries? 4. Why do we need

  5. PASSION FOR WOOD THE DLH GROUP 2006

    E-Print Network [OSTI]

    countries on 5 continents · 19 timber merchant companies in Denmark, 10 of which have do-it-yourself stores Division consists of 19 timber merchant companies in Denmark, just over half of which have an adjacent doPASSION FOR WOOD THE DLH GROUP 2006 #12;54% 21% 25% ONE OF THE WORLD'S MAJOR TIMBER WHOLESALERS

  6. Energie-Cits 2001 BIOMASS -WOOD

    E-Print Network [OSTI]

    Energie-Cits 2001 BIOMASS - WOOD Gasification / Cogeneration ARMAGH United Kingdom Gasification is transferring the combustible matters in organic waste or biomass into gas and pure char by burning the fuel via it allows biomass in small-scaled engines and co-generation units which with conventional technologies

  7. Harvested Wood Products -an Incentive for Deforestation?

    E-Print Network [OSTI]

    Fischlin, Andreas

    1 Harvested Wood Products - an Incentive for Deforestation? Andreas Fischlin1 Abstract Mitigation for deforestation is real. To curb the disadvantages of HWP, some debiting of non-sustainable forest management activities are implemented that provide true disincentives to deforestation, HWP may continue to create some

  8. 4-70C Propane (molar mass = 44.1 kg/kmol) poses a greater fire danger than methane (molar mass = 16 kg/kmol) since propane is heavier than air (molar mass = 29 kg/kmol), and it will settle near the floor.

    E-Print Network [OSTI]

    Bahrami, Majid

    4-36 Ideal Gas 4-70C Propane (molar mass = 44.1 kg/kmol) poses a greater fire danger than methane (molar mass = 16 kg/kmol) since propane is heavier than air (molar mass = 29 kg/kmol), and it will settle MATERIAL. 2008 The McGraw-Hill Companies, Inc. Limited distribution permitted only to teachers

  9. Fast Curing of Composite Wood Products

    SciTech Connect (OSTI)

    Dr. Arthur J. Ragauskas

    2006-04-26T23:59:59.000Z

    The overall objective of this program is to develop low temperature curing technologies for UF and PF resins. This will be accomplished by: Identifying the rate limiting UF and PF curing reactions for current market resins; Developing new catalysts to accelerate curing reactions at reduced press temperatures and times. In summary, these new curing technologies will improve the strength properties of the composite wood products and minimize the detrimental effects of wood extractives on the final product while significantly reducing energy costs for wood composites. This study is related to the accelerated curing of resins for wood composites such as medium density fiberboard (MDF), particle board (PB) and oriented strandboard (OSB). The latter is frequently manufactured with a phenol-formaldehyde resin whereas ureaformaldehyde (UF) resins are usually used in for the former two grades of composite wood products. One of the reasons that hinder wider use of these resins in the manufacturing of wood composites is the slow curing speed as well as inferior bondability of UF resin. The fast curing of UP and PF resins has been identified as an attractive process development that would allow wood to be bonded at higher moisture contents and at lower press temperatures that currently employed. Several differing additives have been developed to enhance cure rates of PF resins including the use of organic esters, lactones and organic carbonates. A model compound study by Conner, Lorenz and Hirth (2002) employed 2- and 4-hydroxymethylphenol with organic esters to examine the chemical basis for the reported enhanced reactivity. Their studies suggested that the enhance curing in the presence of esters could be due to enhanced quinone methide formation or enhanced intermolecular SN2 reactions. In either case the esters do not function as true catalysts as they are consumed in the reaction and were not found to be incorporated in the polymerized resin product. An alternative approach to accelerated PF curing can be accomplished with the addition amines or amides. The later functionality undergoes base catalyzed hydrolysis yielding the corresponding carboxyl ate and free amine which rapidly reacts with the phenolic methylol groups facilitating polymerization and curing of the PF resin (Pizzi, 1997).

  10. Geothermie Unterhaching GmbH und Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865°,Park,2005)EnergyAmatitlanGmbH und Co KG Jump to: navigation,

  11. Characterization of BG28 and KG3 filter glass for Drive Diagnostic Attenuators

    SciTech Connect (OSTI)

    Page, R H; Weiland, T; Folta, J

    2007-11-30T23:59:59.000Z

    BG28 and KG3 filter glasses were tested for use as attenuators in the NIF drive diagnostic (DrD) systems. Tests were performed in the Optical Sciences Laser facility with a 351 nm, 2-step, 3-nsec pulse at fluences ranging up to {approx} 1 J/cm{sup 2}. Single-shot measurements showed no solarization when the samples were allowed to relax for a week after exposure. KG3 filters exhibited no luminescence and no transient pulse distortion. BG28 filters luminesced appreciably and imposed a 'droop' (similar to 'square-pulse distortion') on the signals. The droop parameter is estimated at 0.50 {+-} 0.11 cm{sup 2}/J. Droop is explained in terms of known copper-doped-glass spectroscopy and kinetics (buildup of triplet-state populations, with excited-state absorption). Simulation of the distortion ({approx}1.6%) expected on a 1.8 MJ Haan pulse led to a minor redesign of the Drive Diagnostic with reduced fluence on the BG28 filters to reduce the droop distortion to 0.5%.

  12. Generation, Use, Disposal, and Management Options for CCA-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Generation, Use, Disposal, and Management Options for CCA-Treated Wood May 1998 Helena Solo, INVENTORY OF CCA-TREATED WOOD IN FLORIDA II.1 Characteristics of the Florida Wood Treatment Industry in 1996 10 II.2 Generation and Disposal of Cca-treated Wood 14 II.3 Disposal Reservoirs for Cca-treated Wood

  13. Society of Wood Science and Technology State-of-the-Art Review

    E-Print Network [OSTI]

    Society of Wood Science and Technology State-of-the-Art Review CHEMICAL COUPLING IN WOOD FIBER. In this paper, we review coupling agents, pretreatment, and mixing technology for wood fiber and polymer and adhesion Wood ond trhc,r S c r r ~ ~ Society of Wood Sclencc

  14. Method for improving separation of carbohydrates from wood pulping and wood or biomass hydrolysis liquors

    DOE Patents [OSTI]

    Griffith, William Louis; Compere, Alicia Lucille; Leitten Jr., Carl Frederick

    2010-04-20T23:59:59.000Z

    A method for separating carbohydrates from pulping liquors includes the steps of providing a wood pulping or wood or biomass hydrolysis pulping liquor having lignin therein, and mixing the liquor with an acid or a gas which forms an acid upon contact with water to initiate precipitation of carbohydrate to begin formation of a precipitate. During precipitation, at least one long chain carboxylated carbohydrate and at least one cationic polymer, such as a polyamine or polyimine are added, wherein the precipitate aggregates into larger precipitate structures. Carbohydrate gel precipitates are then selectively removed from the larger precipitate structures. The method process yields both a carbohydrate precipitate and a high purity lignin.

  15. Wood-boring Insects of Trees and Shrubs

    E-Print Network [OSTI]

    Drees, Bastiaan M.; Jackman, John A.; Merchant, Michael E.

    2008-06-17T23:59:59.000Z

    This publication explains how to identify and control wood-boring insects that invade shrubs and shade trees in Texas. 12 pages, 9 figures, 6 photographs, 1 table...

  16. From: FERGAS To: Wood, Natalie (CONTR); Moore, Larine Subject...

    Energy Savers [EERE]

    Wood, Natalie (CONTR); Moore, Larine Subject: FW: FE Docket No. 14-96-LNG Date: Friday, October 24, 2014 3:17:49 PM Attachments: image001.png ---...

  17. arsenate cca wood: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Renewable Energy Websites Summary: of primary energy in Estonia Wood fuels production Pellet firing projects in Estonia - SIDA Demo East firing projects in...

  18. anisotropic olivier wood: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Renewable Energy Websites Summary: of primary energy in Estonia Wood fuels production Pellet firing projects in Estonia - SIDA Demo East firing projects in Estonia:...

  19. Microsoft Word - CX-Murray-CusterWoodPoles_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    Covington SUBJECT: Environmental Clearance Memorandum Steve Scott Line Foreman III - TFNF-Snohomish Proposed Action: Wood pole replacement at selected locations along the...

  20. FIEA Advancing Wood Technology Forest Industry Engineering Scholarship

    E-Print Network [OSTI]

    Hickman, Mark

    year. Forestry and wood products companies, key product suppliers, researchers and technology qualification. This FIEA Scholarship has also been set up to encourage and support an outstanding student

  1. Home Page > Business > Industrial > Global Trade Of Wood Chips Down 26% In 2009 As Pulpmills Reduce Production Worldwide, Reports Wood Resources International

    E-Print Network [OSTI]

    in Europe searching for additional sources of woody biomass, it is likely that trade with wood chips On March 16-17, 2010, the 4th Global Wood Fiber Conference: Trade in Wood chips and Biomass worldwide, European demand for pellets and biomass chips, outlook for plantation wood chip supply, ocean

  2. Life in the woods : production and consumption of the urban forest

    E-Print Network [OSTI]

    Volicer, Nadine (Nadine M.)

    2012-01-01T23:59:59.000Z

    The use of wood is fraught with paradox. Wood as a building material is embraced for its naturalness, while the cutting of trees is indicted as a destruction of nature. Wood is lauded for its structural properties and ...

  3. How Wood Chip Size Affects Pretreatment Effectiveness of Woody Biomass for Biological Processing

    E-Print Network [OSTI]

    Tam, Jerry

    2013-01-01T23:59:59.000Z

    temperature treatment of aspen. Wood Sci Technol 40:371-391size- reduction of Poplar and Aspen wood. Biotechnology andHydrothermal Pretreatment of Aspen Wood Chips 5.1. Abstract

  4. Volatile constituents in a wood pyrolysis oil

    E-Print Network [OSTI]

    Lin, Shih-Chien

    1978-01-01T23:59:59.000Z

    , 1958]. . . . . . . . . . . . 4 Pyrolysis products of cellulose and treated cellulose at 600oC f Chin, 1973]. . . . . . . . . . . . . . . 6 3. Pyrolysis products of lignin at 450-550 C [Allen and Nattil a, 1971] Properties of wood pyrolysis oil. 12... and decom- 0 poses at 225-325 C. Cellulose decompos s at higher temp- eratures within a narrow range of 320-375 C. In other 0 words, the cell wall polysaccharides provide most of the vol ati) e products, while lignin predominantly forms a charred...

  5. Wood, Wisconsin: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy Resources JumpWood, Wisconsin: Energy Resources Jump

  6. Wood3 Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project JumpWisconsin: Energy ResourcesWolverineWood3

  7. Wood Energy Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapers Home Kyoung's pictureWindManitoba,WisconsinWonder SourceWood

  8. Wood To Fuel LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapers Home Kyoung's pictureWindManitoba,WisconsinWonderWood To Fuel

  9. Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process

    E-Print Network [OSTI]

    Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process J. Z. Lu,1 Q. Wu,1 I. I strength and flexural modulus of the resultant composites. With 50 wt % wood fiber, the optimum compounding of the modified blends and the dynamic mechanical properties of the resultant composites. The melt torque

  10. Wood for energy at Bedgebury Forest Bedgebury visitor centre's

    E-Print Network [OSTI]

    Wood for energy at Bedgebury Forest Bedgebury visitor centre's woodfuel boiler provides a renewable source of energy and demonstrates that locally- produced wood has economic and sustainable value is stored outside but stacked off the ground to allow air to circulate. It is essential that the chips

  11. SECO - Dow Corning's Wood Fueled Industrial Cogeneration Project

    E-Print Network [OSTI]

    Betts, W. D.

    1982-01-01T23:59:59.000Z

    In 1979, Dow Corning Corporation decided to build a wood fueled steam and electric cogeneration (SECO) power plant at Midland, Michigan. This decision was prompted by the high cost of oil and natural gas, an abundant supply of wood in mid Michigan...

  12. Wood, energy and households: Perspectives on rural Kenya

    SciTech Connect (OSTI)

    Barnes, C.; Ensminger, J.; O'Keefe, P.

    1984-01-01T23:59:59.000Z

    This book presents papers on the use of wood fuels in Kenya. Topics considered include domestic energy consumption, historical aspects, the Kenyan economy, ecology, supply and demand, forests, aspects of energy consumption in a pastoral ecosystem, estimation of present and future demand for wood fuels, and energy source development.

  13. Emerging Markets for Wood Energy Richard Vlosky, Director

    E-Print Network [OSTI]

    ) are Woody Biomass Utilization Grants (Woody BUG) and Biomass Crop Assistance Program (BCAP) Renewable Fuel The Louisiana Forest Products Development Center Wood-to-Energy Wood Biomass Energy Options Current Forest Products Development Center School of Renewable Natural Resources, LSU AgCenter & School

  14. SECO - Dow Corning's Wood Fueled Industrial Cogeneration Project

    E-Print Network [OSTI]

    Betts, W. D.

    1982-01-01T23:59:59.000Z

    In 1979, Dow Corning Corporation decided to build a wood fueled steam and electric cogeneration (SECO) power plant at Midland, Michigan. This decision was prompted by the high cost of oil and natural gas, an abundant supply of wood in mid Michigan...

  15. Wood-based Energy Technologies Michigan offers some significant advantages

    E-Print Network [OSTI]

    quality stan- dards. Wood pellets are an attractive alternative for home heating or for larger individual--ground wood. Pellet storage area. #12;distributed through a District Energy grid. Efficiencies are high on municipal solid waste. Both district heating and CHP plants can also pro- duce pellets for local housing

  16. Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Relative Leaching and Aquatic Toxicity of Pressure-Treated Wood Products Using Batch Leaching Tests treated with one of five different waterborne chemical preservatives, were leached using 18-h batch- treated wood at concentrations above the U.S. federal toxicity characteristic limit (5 mg/L). All

  17. A Chemical Stain for Identifying Arsenic-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    A Chemical Stain for Identifying Arsenic-Treated Wood (FINAL) Submitted June 23, 2006 Amy Omae.2 Motivation 4 I.3 Objectives 5 CHAPTER II, DEVELOPMENT OF A CHEMICAL STAIN FOR IDENTIFYING ARSENIC-TREATED Applications 22 II.5 Resulting Stain to Identify Arsenic-Treated Wood and Methods of Testing 25 CHAPTER III

  18. FAO Forestry Department Wood Energy WISDOM East Africa

    E-Print Network [OSTI]

    FAO Forestry Department Wood Energy WISDOM East Africa Woodfuel Integrated Supply and Tropical Southern Africa woodfuels, mainly fuelwood, contribute from 75 to 86 percent of total primary African countries Rudi Drigo Consultant - Wood energy planning and forest resources monitoring August 2005

  19. SURFACE CHARACTERIZATION OF CHEMICALLY MODIFIED WOOD: DYNAMIC WETTABILITY1

    E-Print Network [OSTI]

    wetting slope and K value) were used to illustrate the dynamic wetting process. Dynamic contact angle the dynamic wettability of wood surfaces modified with different coupling agents. Keywords: Chemical articles on dynamic wetting process for wood adhesion have been published (Scheikl and Dunky 1998

  20. Modelling piloted ignition of wood and plastics

    SciTech Connect (OSTI)

    Blijderveen, Maarten van [TNO, Schoemakerstraat 97, 2628 VK Delft (Netherlands); University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands); Bramer, Eddy A. [University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands); Brem, Gerrit, E-mail: g.brem@utwente.nl [University of Twente, Department of Thermal Engineering, Drienerlolaan 5, 7522 NB Enschede (Netherlands)

    2012-09-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer We model piloted ignition times of wood and plastics. Black-Right-Pointing-Pointer The model is applied on a packed bed. Black-Right-Pointing-Pointer When the air flow is above a critical level, no ignition can take place. - Abstract: To gain insight in the startup of an incinerator, this article deals with piloted ignition. A newly developed model is described to predict the piloted ignition times of wood, PMMA and PVC. The model is based on the lower flammability limit and the adiabatic flame temperature at this limit. The incoming radiative heat flux, sample thickness and moisture content are some of the used variables. Not only the ignition time can be calculated with the model, but also the mass flux and surface temperature at ignition. The ignition times for softwoods and PMMA are mainly under-predicted. For hardwoods and PVC the predicted ignition times agree well with experimental results. Due to a significant scatter in the experimental data the mass flux and surface temperature calculated with the model are hard to validate. The model is applied on the startup of a municipal waste incineration plant. For this process a maximum allowable primary air flow is derived. When the primary air flow is above this maximum air flow, no ignition can be obtained.

  1. Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely reliant on wood chip

    E-Print Network [OSTI]

    Biomass plants face wood supply risks Report warns giant new biomass power plants will be hugely's biomass energy sector could be undermined unless businesses move to resolve the supply chain issues-scale biomass plants will leave generators largely reliant on biomass from overseas such as wood chips, elephant

  2. Multipass comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2014-05-27T23:59:59.000Z

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction one or more times through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel.

  3. Implementing Strategies for Drying and Pressing Wood Without Emissions Controls

    SciTech Connect (OSTI)

    Sujit Banerjee; Terrance Conners

    2007-09-07T23:59:59.000Z

    Drying and pressing wood for the manufacture of lumber, particleboard, oriented strand board (OSB), veneer and medium density fiberboard (MDF) release volatile organic compounds (VOCs) into the atmosphere. These emissions require control equipment that are capital-intensive and consume significant quantities of natural gas and electricity. The objective of our work was to understand the mechanisms through which volatile organic compounds are generated and released and to develop simple control strategies. Of the several strategies developed, two have been implemented for OSB manufacture over the course of this study. First, it was found that increasing final wood moisture by about 2-4 percentage points reduced the dryer emissions of hazardous air pollutants by over 70%. As wood dries, the escaping water evaporatively cools the wood. This cooling tapers off wood when the wood is nearly dry and the wood temperature rises. Thermal breakdown of the wood tissue occurs and VOCs are released. Raising the final wood moisture by only a few percentage points minimizes the temperature rise and reduces emissions. Evaporative cooling also impacts has implications for VOC release from wood fines. Flaking wood for OSB manufacture inevitable generates fines. Fines dry out rapidly because of their high surface area and evaporative cooling is lost more rapidly than for flakes. As a result, fines emit a disproportionate quantity of VOCs. Fines can be reduced in two ways: through screening of the green furnish and through reducing their generation during flaking. The second approach is preferable because it also increased wood yield. A procedure to do this by matching the sharpness angle of the flaker knife to the ambient temperature was also developed. Other findings of practical interests are as follows: Dielectric heating of wood under low-headspace conditions removes terpenes and other extractives from softwood; The monoterpene content in trees depend upon temperature and seasonal effects; Method 25A emissions from lumber drying can be modeled from a knowledge of the airflow through the kiln; A heat transfer model shows that VOCs released during hot-pressing mainly originate from the surface of the board; and Boiler ash can be used to adsorb formaldehyde from air streams.

  4. Exergy analysis of the Chartherm process for energy valorization and material recuperation of chromated copper arsenate (CCA) treated wood waste

    SciTech Connect (OSTI)

    Bosmans, A., E-mail: anouk.bosmans@mech.kuleuven.be [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium); Auweele, M. Vanden; Govaerts, J.; Helsen, L. [Department of Mechanical Engineering, Katholieke Universiteit Leuven, Celestijnenlaan 300A, 3001 Heverlee (Belgium)

    2011-04-15T23:59:59.000Z

    The Chartherm process (Thermya, Bordeaux, France) is a thermochemical conversion process to treat chromated copper arsenate (CCA) impregnated wood waste. The process aims at maximum energy valorization and material recuperation by combining the principles of low-temperature slow pyrolysis and distillation in a smart way. The main objective of the exergy analysis presented in this paper is to find the critical points in the Chartherm process where it is necessary to apply some measures in order to reduce exergy consumption and to make energy use more economic and efficient. It is found that the process efficiency can be increased with 2.3-4.2% by using the heat lost by the reactor, implementing a combined heat and power (CHP) system, or recuperating the waste heat from the exhaust gases to preheat the product gas. Furthermore, a comparison between the exergetic performances of a 'chartherisation' reactor and an idealized gasification reactor shows that both reactors destroy about the same amount of exergy (i.e. 3500 kW kg{sub wood}{sup -1}) during thermochemical conversion of CCA-treated wood. However, the Chartherm process possesses additional capabilities with respect to arsenic and tar treatment, as well as the extra benefit of recuperating materials.

  5. Analysis on storage off-gas emissions from woody, herbaceous, and torrefied biomass

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tumuluru, Jaya Shankar; Lim, C. Jim; Bi, Xiaotao T.; Kuang, Xingya; Melin, Staffan; Yazdanpanah, Fahimeh; Sokhansanj, Shahab

    2015-03-01T23:59:59.000Z

    Wood chips, torrefied wood chips, ground switchgrass, and wood pellets were tested for off-gas emissions during storage. Storage canisters with gas-collection ports were used to conduct experiments at room temperature of 20 C and in a laboratory oven set at 40 C. Commercially-produced wood pellets yielded the highest carbon monoxide (CO) emissions at both 20 and 40 C (1600 and 13,000 ppmv), whereas torrefied wood chips emitted the lowest of about more20 and 40 C at the end of 11 days of storage. CO emission factors (milligrams per kilogram of biomass) calculated were lowest for ground switchgrass and torrefied wood chips (2.68 and 4.86 mg/kg) whereas wood pellets had the highest CO of about 10.60 mg/kg, respectively, at 40 C after 11 days of storage. In the case of CO?, wood pellets recorded the lowest value of 55.46 mg/kg, whereas switchgrass recorded the highest value of 318.72 mg/kg. This study concludes that CO emission factor is highest for wood pellets, CO? is highest for switchgrass and CH? is negligible for all feedstocks except for wood pellets, which is about 0.374 mg/kg at the end of 11-day storage at 40 C.less

  6. Finite Future Cosmological Singularity Times and Maximum Predictability Times in a Nonlinear FRW-KG Scalar Cosmology

    E-Print Network [OSTI]

    John Max Wilson; Keith Andrew

    2012-07-27T23:59:59.000Z

    We investigate the relative time scales associated with finite future cosmological singularities, especially those classified as Big Rip cosmologies, and the maximum predictability time of a coupled FRW-KG scalar cosmology with chaotic regimes. Our approach is to show that by starting with a FRW-KG scalar cosmology with a potential that admits an analytical solution resulting in a finite time future singularity there exists a Lyapunov time scale that is earlier than the formation of the singularity. For this singularity both the cosmological scale parameter a(t) and the Hubble parameter H(t) become infinite at a finite future time, the Big Rip time. We compare this time scale to the predictability time scale for a chaotic FRW-KG scalar cosmology. We find that there are cases where the chaotic time scale is earlier than the Big Rip singularity calling for special care in interpreting and predicting the formation of the future cosmological singularity.

  7. Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC

    E-Print Network [OSTI]

    Citation & Copyright (to be inserted by Humphrey) Thermal and Dynamic-mechanical Properties of Wood-PVC properties, maleation, thermal analysis, wood veneer, wood-PVC composites ABSTRACT The influence of maleation on thermal and dynamic-mechanical properties of wood-PVC composites was investigated in this study

  8. Wood plastic composites based on microfibrillar blends of high density polyethylene/poly(ethylene terephthalate)

    E-Print Network [OSTI]

    Wood plastic composites based on microfibrillar blends of high density polyethylene January 2010 Keywords: Wood plastic composites Poly(ethylene terephthalate) Polyethylene Extrusion a b into wood plastic composites through a two-step reactive extrusion technology. Wood flour was added into pre

  9. Jmtland County Energy Agency Comfortable use of wood pellets in one-family houses in

    E-Print Network [OSTI]

    Jämtland County Energy Agency Sweden 1 Comfortable use of wood pellets in one-family houses-operation with the Swedish Energy Agency, carried through the project "Comfortable use of wood pellets in one-family houses of one-family houses to start using wood pellets and an increase of the use of wood pellets in one

  10. Dynamics of wood recruitment in streams of the northeastern US Dana R. Warren a,

    E-Print Network [OSTI]

    Kraft, Clifford E.

    : Large woody debris LWD Riparian forest Wood recruitment Wood dynamics Stream restoration Debris dam restoration efforts often incorporate large wood. In most cases, however, stream restoration projectsDynamics of wood recruitment in streams of the northeastern US Dana R. Warren a, *, Clifford E

  11. Author's personal copy Evaluation of methods for sorting CCA-treated wood

    E-Print Network [OSTI]

    Florida, University of

    Author's personal copy Evaluation of methods for sorting CCA-treated wood Gary Jacobi a , Helena contains treated wood including wood treated with chromated copper arsenate (CCA). Many recycling options of sorting methods for identifying treated wood. Sorting methods evaluated included visual sorting and visual

  12. PROPERTIES OF HDPE/CLAY/WOOD NANOCOMPOSITES , C. M. Clemons 2

    E-Print Network [OSTI]

    from wood, kenaf, flax, hemp, cotton, Kraft pulp, coconut husk, areca fruit, pineapple leaf, oil palm

  13. An economical and market analysis of Canadian wood pellets.

    SciTech Connect (OSTI)

    Peng, J. [University of British Columbia, Vancouver

    2010-08-01T23:59:59.000Z

    This study systematically examined the current and future wood pellet market, estimated the cost of Canadian torrefied pellets, and compared the torrefied pellets with the conventional pellets based on literature and industrial data. The results showed that the wood pellet industry has been gaining significant momentum due to the European bioenergy incentives and the rising oil and natural gas prices. With the new bioenergy incentives in USA, the future pellets market may shift to North America, and Canada can potentially become the largest pellet production centre, supported by the abundant wood residues and mountain pine beetle (MPB) infested trees.

  14. PET 424304 2013 Exercises 1+2 of 4 17 Jan + 31 Jan 2013 1. 1kg ice at 263 K 1 kg water at 293 K. Heat Q at T = T is supplied by the surroundings.

    E-Print Network [OSTI]

    Zevenhoven, Ron

    . Heat Q at T = T is supplied by the surroundings. Specific heat ice : ci = 2,14 kJ/(kgK); water cw = 4 424304 2013 Exercises 1+2 of 4 17 Jan + 31 Jan 2013 5. For cooling T T1 = 80 K 1 1 1 1 1 ln

  15. Method for lowering the VOCS emitted during drying of wood products

    DOE Patents [OSTI]

    Banerjee, Sujit (1832 Jacksons Creek Point, Marietta, GA 30068); Boerner, James Robert (154 Junedale Rd., Cincinnati, OH 45218); Su, Wei (2262 Orleans Ave., Marietta, GA 30062)

    2000-01-01T23:59:59.000Z

    The present invention is directed to a method for removal of VOCs from wood products prior to drying the wood products. The method of the invention includes the steps of providing a chamber having an opening for receiving wood and loading the chamber with green wood. The wood is loaded to an extent sufficient to provide a limited headspace in the chamber. The chamber is then closed and the wood is heated in the chamber for a time and at a temperature sufficient to saturate the headspace with moisture and to substantially transfer VOCs from the wood product to the moisture in the headspace.

  16. Effect of low and high storage temperatures on head space gas concentrations and physical properties of wood pellets

    SciTech Connect (OSTI)

    Jaya Shankar Tumuluru; Shahab Sokhansanj; C. Jim Lim; Tony Bi; Xingya Kuang; Staffan Melin

    2013-11-01T23:59:59.000Z

    Headspace gas concentrations and wood pellet properties were studied in sealed glass canisters at 540 degrees C storage temperatures. CO2 and CO concentrations at 5, 10, 20 and 40 degrees C at the end of 2328 days of storage were 1600 and 200, 4700 and 1200, and 31 200 and 15 800 parts per million by volume (ppmv) respectively. Corresponding O2 concentration was about 1949, 1920, 180 and 207% respectively. Non-linear regression equations adequately described the gas concentrations in the storage container as a function of time. Safe level estimation functions developed were linear for O2 and logarithmic for CO and CO2 concentrations. Measured pellet properties moisture, length, diameter, unit, bulk and tapped density, durability, calorific value, ash content and per cent fines were in the range of 46502%, 1415 mm, 6465 mm, 11251175 kg m-3, 750770 kg m-3, 825840 kg m-3, 7374%, 18321878 MJ kg-1, 065074% and 013015%. Durability values of pellets decreased by 13% at 40 degrees C storage temperature and other properties changed marginally.

  17. Ozone Climatologies Figure 1: Ozone climatology for control run in kg/m(a), percentage change in

    E-Print Network [OSTI]

    Feigon, Brooke

    Ozone Climatologies (a) (b) (c) Figure 1: Ozone climatology for control run in kg/m(a), percentage change in ozone for the perturbed runs; tropopause region (b), whole stratosphere (c). Determining the impact of lower stratospheric ozone depletion on Southern Hemisphere climate Sarah P.E. Keeley and Nathan

  18. Milestone Report - Complete New Adsorbent Materials for Marine Testing to Demonstrate 4.5 g-U/kg Adsorbent

    SciTech Connect (OSTI)

    Janke, Christopher James [ORNL; Das, Sadananda [ORNL; Oyola, Yatsandra [ORNL; Mayes, Richard T. [ORNL; Saito, Tomonori [ORNL; Brown, Suree [ORNL; Gill, Gary [PNNL; Kuo, Li-Jung [PNNL; Wood, Jordana [PNNL

    2014-08-01T23:59:59.000Z

    This report describes work on the successful completion of Milestone M2FT-14OR03100115 (8/20/2014) entitled, Complete new adsorbent materials for marine testing to demonstrate 4.5 g-U/kg adsorbent. This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed two new families of fiber adsorbents that have demonstrated uranium adsorption capacities greater than 4.5 g-U/kg adsorbent after marine testing at PNNL. One adsorbent was synthesized by radiation-induced graft polymerization of itaconic acid and acrylonitrile onto high surface area polyethylene fibers followed by amidoximation and base conditioning. This fiber showed a capacity of 4.6 g-U/kg adsorbent in marine testing at PNNL. The second adsorbent was prepared by atom-transfer radical polymerization of t-butyl acrylate and acrylonitrile onto halide-functionalized round fibers followed by amidoximation and base hydrolysis. This fiber demonstrated uranium adsorption capacity of 5.4 g-U/kg adsorbent in marine testing at PNNL.

  19. Wood Gasification: Where It's At, Where It's Going

    E-Print Network [OSTI]

    Murphy, M. L.

    1981-01-01T23:59:59.000Z

    This paper discusses the principles and practice of various designs of biomass/wood gasifiers. In general, the basic principle of gasification is reviewed. A look at existing gasifier schemes, including packed bed updraft, downdraft, and fluidized...

  20. Wood Gasification: Where It's At, Where It's Going

    E-Print Network [OSTI]

    Murphy, M. L.

    1981-01-01T23:59:59.000Z

    This paper discusses the principles and practice of various designs of biomass/wood gasifiers. In general, the basic principle of gasification is reviewed. A look at existing gasifier schemes, including packed bed updraft, downdraft, and fluidized...

  1. The Honorable John T. 'Gregorio 301 N. Wood Avenue

    Office of Legacy Management (LM)

    Wood Avenue Linden, 'New Jersey 07036 d. Dear Mayor Gregorio: ,' ,' .' , Secretary of Energy Hazel O'Leary has announced a new approach to openness, in the'llepartment' of...

  2. Disentangling Biodiversity and Climatic Determinants of Wood Production

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    an important role in carbon sequestration. Methodology/Principal Findings: We tested whether tree wood incorporating the role of biodiversity in management and policy plans for forest carbon sequestration. Citation

  3. Seismic rehabilitation of wood diaphragms in unreinforced masonary buildings

    E-Print Network [OSTI]

    Grubbs, Amber Jo

    2002-01-01T23:59:59.000Z

    The purpose of this study is to evaluate the seismic performance of existing and rehabilitated wood floor and roof diaphragms in typical pre-1950's, unreinforced masonry (URM) buildings found in the Central and Eastern portions of the United States...

  4. aspen wood chips: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 COMPARISON OF DIFFERENT APPROACHES FOR THE SIMULATION OF BOILERS USING OIL, GAS, PELLETS OR WOOD CHIPS CiteSeer Summary: A detailed model for the simulation of boilers using...

  5. Kilowatts From Waste Wood In The Furniture Industry

    E-Print Network [OSTI]

    Nailen, R. L.

    1981-01-01T23:59:59.000Z

    recently, the Singer Furniture Co., Lenoir, N. Carolina, purchased a 450 kilowatt steam turbine/induction generator set to use extra steam - produced by 'free' waste wood fuel - in generating 15% of the plant's electrical energy demand. The turbine...

  6. An Overview of the U.S. Wood Preserving Industry

    E-Print Network [OSTI]

    Preservatives Oilborne Preservatives Creosote Treatments Fire Retardants Additives Concluding Comments Waterborne Preservatives Oilborne Preservatives Creosote Treatments Fire Retardants Additives a baselinewas to develop a baseline profile of the treated woodprofile of the treated wood manufacturing

  7. An Overview of the Louisiana Primary Solid Wood Products Industry

    E-Print Network [OSTI]

    goal of this second study is to profile the primary solid wood products industry. In addition (including pulp and paper) and secondary manufacturing establishments (Jacob et al. 1987). The forest

  8. RFPs Due for Hazardous Fuel Wood to Energy Grant

    Broader source: Energy.gov [DOE]

    The U.S. Forest Service requests proposals for the 2014 Hazardous Fuel Wood to Energy (W2E) Grant. The outcome anticipated under this funding mechanism will advance the United States Department of...

  9. RFPs Due for Statewide Wood Energy Cooperative Agreement

    Broader source: Energy.gov [DOE]

    The U.S. Forest Service requests proposals for the 2014 Statewide Wood Energy Teams (SWET) Cooperative Agreement. The outcome anticipated under this funding mechanism will advance the United States...

  10. Long-term lime pretreatment of poplar wood

    E-Print Network [OSTI]

    Sierra Ramirez, Rocio

    2006-04-12T23:59:59.000Z

    Lignocellulosic biomass (e.g., poplar wood) provides a unique and sustainable resource for environmentally safe organic fuels and chemicals. The core of this study is the pretreatment step involved in bioconversion processes. Pretreatment...

  11. Long-term lime pretreatment of poplar wood

    E-Print Network [OSTI]

    Sierra Ramirez, Rocio

    2006-04-12T23:59:59.000Z

    Lignocellulosic biomass (e.g., poplar wood) provides a unique and sustainable resource for environmentally safe organic fuels and chemicals. The core of this study is the pretreatment step involved in bioconversion processes. Pretreatment...

  12. Photo by Helvetas Moambique Architecture, Wood and Civil Engineering

    E-Print Network [OSTI]

    Wehrli, Bernhard

    Photo by Helvetas Moambique Architecture, Wood and Civil Engineering #12;IWRM in order to maximize the resultant economic and social welfare in an equitable manner without CAS consists of the following units: - Basic knowledge in order to follow the class

  13. Wood Products Marketing And Value-Added Opportunities

    E-Print Network [OSTI]

    Wood Products Marketing And Value-Added Opportunities In Latin America: A Focus on Brazil Richard School of Renewable Natural Resources Louisiana State University Presented at: PANORAMA Curitiba, Brazil

  14. Habitat selection of the Wood Thrush nesting in east Texas

    E-Print Network [OSTI]

    Carrie, Neil Ross

    1995-01-01T23:59:59.000Z

    HABITAT SELECTION OF THE WOOD THRUSH NESTING IN EAST TEXAS A Thesis by NEIL ROSS CARRIE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1995 Major Subject: Wildlife and Fisheries Sciences HABITAT SELECTION OF THE WOOD THRUSH NESTING IN EAST TEXAS A Thesis by NEIL ROSS CARRIE Submitted to Texas A&M University in partial fulfillment of the requirements for the degree...

  15. Kinetic Modeling and Assessment of Lime Pretreatment of Poplar Wood

    E-Print Network [OSTI]

    Sierra Ramirez, Rocio

    2012-02-14T23:59:59.000Z

    biomass is one of the most promising feedstocks for producing biofuels through fermentation processes. Among lignocellulose choices, poplar wood is appealing because of high energy potential, above-average carbon mitigation potential, fast growth... KINETIC MODELING AND ASSESSMENT OF LIME PRETREATMENT OF POPLAR WOOD A Dissertation by ROCIO SIERRA RAMIREZ Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements...

  16. Moisture Distribution and Flow During Drying of Wood and Fiber

    SciTech Connect (OSTI)

    Zink-Sharp, Audrey; Hanna, Robert B.

    2001-12-28T23:59:59.000Z

    New understanding, theories, and techniques for moisture flow and distribution were developed in this research on wood and wood fiber. Improved understanding of the mechanisms of flake drying has been provided. Observations of flake drying and drying rate curves revealed that rate of moisture loss consisted of two falling rate periods and no constant rate drying period was observed. Convective heat transfer controls the first period, and bound water diffusion controls the second period. Influence of lower drying temperatures on bending properties of wood flakes was investigated. Drying temperature was found to have a significant influence on bending stiffness and strength. A worksheet for calculation of the energy required to dry a single strandboard flake was developed but has not been tested in an industrial setting yet. A more complete understanding of anisotropic transverse shrinkage of wood is proposed based on test results and statistical analysis. A simplified mod el of a wood cell's cross-section was drawn for calculating differential transverse shrinkage. The model utilizes cell wall thickness and microfibrillar packing density and orientation. In spite of some phenomena of cell wall structure not yet understood completely, the results might explain anisotropic transverse shrinkage to a major extent. Boundary layer theory was found useful for evaluating external moisture resistance during drying. Simulated moisture gradients were quire comparable to the actual gradients in dried wood. A mathematical procedure for determining diffusion and surface emission coefficients was also developed. Thermal conductivity models of wood derived from its anatomical structure were created and tested against experimental values. Model estimations provide insights into changes in heat transfer parameters during drying. Two new techniques for measuring moisture gradients created in wood during drying were developed. A new technique that utilizes optical properties of cobalt chloride was developed for nondestructive determination of surface moisture content. Fundamental new understanding of drying characteristics in wood and fiber has been provided that can be used by researchers to improve drying of wood and fiber. The three techniques for measuring moisture content and gradients provided in this study are efficient, practical, and economical - easy to apply by industry and researchers. An energy consumption worksheet is provided as a first step toward reducing energy consumed during drying of lumber and strandboard flakes. However, it will need additional verification and testing.

  17. First Dark Matter Search Results from a 4-kg CF$_3$I Bubble Chamber Operated in a Deep Underground Site

    SciTech Connect (OSTI)

    Behnke, E.; /Indiana U., South Bend; Behnke, J.; /Indiana U., South Bend; Brice, S.J.; /Fermilab; Broemmelsiek, D.; /Fermilab; Collar, J.I.; /Chicago U., EFI; Conner, A.; /Indiana U., South Bend; Cooper, P.S.; /Fermilab; Crisler, M.; /Fermilab; Dahl, C.E.; /Chicago U., EFI; Fustin, D.; /Chicago U., EFI; Grace, E.; /Indiana U., South Bend /Fermilab

    2012-04-01T23:59:59.000Z

    New data are reported from the operation of a 4.0 kg CF{sub 3}I bubble chamber in the 6800 foot deep SNOLAB underground laboratory. The effectiveness of ultrasound analysis in discriminating alpha decay background events from single nuclear recoils has been confirmed, with a lower bound of >99.3% rejection of alpha decay events. Twenty single nuclear recoil event candidates and three multiple bubble events were observed during a total exposure of 553 kg-days distributed over three different bubble nucleation thresholds. The effective exposure for single bubble recoil-like events was 437.4 kg-days. A neutron background internal to the apparatus, of known origin, is estimated to account for five single nuclear recoil events and is consistent with the observed rate of multiple bubble events. This observation provides world best direct detection constraints on WIMP-proton spin-dependent scattering for WIMP masses >20 GeV/c{sup 2} and demonstrates significant sensitivity for spin-independent interactions.

  18. Decision-maker's guide to wood fuel for small industrial energy users. Final report. [Includes glossary

    SciTech Connect (OSTI)

    Levi, M. P.; O'Grady, M. J.

    1980-02-01T23:59:59.000Z

    The technology and economics of various wood energy systems available to the small industrial and commercial energy user are considered. This book is designed to help a plant manager, engineer, or others in a decision-making role to become more familiar with wood fuel systems and make informed decisions about switching to wood as a fuel. The following subjects are discussed: wood combustion, pelletized wood, fuel storage, fuel handling and preparation, combustion equipment, retrofitting fossil-fueled boilers, cogeneration, pollution abatement, and economic considerations of wood fuel use. (MHR)

  19. Performance-oriented packaging testing of PPP-B-601 ERAPS wood box for packing Group II solid hazardous material. Test report for Oct 91

    SciTech Connect (OSTI)

    Wu, E.

    1991-10-01T23:59:59.000Z

    Qualification tests were performed to determine whether the in-service PPP-B-601 ERAPS Wood Box could be utilized to contain properly dunnaged solid type hazardous materials weighing up to a gross weight of 237 kg (523 pounds). The tests were conducted in accordance with Performance Oriented Packaging (POP) requirements specified by the United Nations Recommendations on the Transportation of Dangerous Goods. The box has conformed to the POP performance requirements; i.e., the box successfully retained its contents throughout the stacking, vibration and drop tests.

  20. Comminution process to produce precision wood particles of uniform size and shape with disrupted grain structure from wood chips

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2013-08-13T23:59:59.000Z

    A process of comminution of wood chips (C) having a grain direction to produce a mixture of wood particles (P), wherein the wood chips are characterized by an average length dimension (L.sub.C) as measured substantially parallel to the grain, an average width dimension (W.sub.C) as measured normal to L.sub.C and aligned cross grain, and an average height dimension (H.sub.C) as measured normal to W.sub.C and L.sub.C, and wherein the comminution process comprises the step of feeding the wood chips in a direction of travel substantially randomly to the grain direction through a counter rotating pair of intermeshing arrays of cutting discs (D) arrayed axially perpendicular to the direction of wood chip travel, wherein the cutting discs have a uniform thickness (T.sub.D), and wherein at least one of L.sub.C, W.sub.C, and H.sub.C is greater than T.sub.D.

  1. Properties of concrete containing wood/coal fly ash mixtures

    SciTech Connect (OSTI)

    Boylan, D.M.; Larrimore, C.L.; Fouad, F.

    1999-07-01T23:59:59.000Z

    Utilities are increasingly interested in co-firing wood with coal in existing pulverized coal units. The co-firing technology is a means of developing a relatively low-cost renewable energy resource, as well as of supporting customers and community by making energy with biomass that might otherwise have been land-filled. However, recent changes in the ASTM C618 standard for fly ash as cement replacement restrict the definition of fly ash that includes non-coal sources. As a result, wood co-firing could affect the market for the fly ash, reducing ash sales revenue, increasing ash disposal costs, and overall substantially increasing the cost of the co-firing technology. In order to address concerns about the effect of wood ash/coal ash mixtures on concrete properties, a study was conducted by University of Alabama at Birmingham, Southern Company, EPRI, and the State of Alabama. This study compared the effects on properties of concrete made with fly ash from coal and made with fly ash from co-firing up to 30% wood with coal. Fly ashes from three plants were used, with two of the ashes from actual co-firing experience and the third an artificial blend of wood and coal ash. Concrete test cylinders were made of several cement/fly ash mixes, and enough were made to allow testing periodically over a one year time period. Test measurements included workability, setting time, air content, compressive and flexural strength, rapid chloride permeability and freeze thaw. It was concluded on the basis of these tests that the wood ash content had no detrimental effect on the plastic and hardened properties of the concrete.

  2. Analytical Modeling of Wood Frame Shear Walls Subjected to Vertical Load

    E-Print Network [OSTI]

    Nguyendinh, Hai

    2011-08-08T23:59:59.000Z

    referred to as Analytical Model of wood frame SHEar walls subjected to Vertical load (AMSHEV) is based on the kinematic behavior of wood frame shear walls and captures significant characteristics observed from experimental testing through appropriate...

  3. Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Metals Concentrations in Soils Below Decks Made of CCA-Treated Wood This report is an excerpt from the report titled: New Lines of CCA-Treated Wood Research, In-Service and Disposal Issues Which was finalized

  4. Simulating the dynamics of flexible wood pulp fibres in suspension John M. Stockie

    E-Print Network [OSTI]

    Stockie, John

    , including wood pulp processing, polymer composites, and formation of fibre-reinforced materials elements to form a surface that re- sists bending and stretching. This is a natural construction for wood

  5. CONTROLLING THE INTERNATIONAL TRADE IN ILLEGALLY LOGGED TIMBER AND WOOD PRODUCTS

    E-Print Network [OSTI]

    CONTROLLING THE INTERNATIONAL TRADE IN ILLEGALLY LOGGED TIMBER AND WOOD PRODUCTS A study prepared@riia.org February 2002 #12;Controlling the international trade in illegally logged timber and wood products Page 2...................................................................................................................... 11 ILLEGAL ACTIVITIES IN THE FOREST SECTOR

  6. Wood residuals find big uses in small pieces

    SciTech Connect (OSTI)

    Glenn, J.

    1996-12-01T23:59:59.000Z

    With a history of finding economic uses for leftovers, the wood industry explores sustainable options for creating higher value products. Years ago, companies saw the use - any use - of residues as a sound, economic business practice. Today, many companies are looking to go beyond low value products such as mulch, animal bedding and fuel, and market to higher value end users. Additionally, with so much material from the primary industries already accounted for, consumers of wood residue are in need of additional supply from sources such as secondary mills (furniture manufacturers, etc.), as wells as the C&D and MSW streams. This paper discusses these products and markets.

  7. Rational production of veneer by IR-heating of green wood during peeling: Modeling experiments

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    (0)3 85 59 53 85 E-mail: anna.dupleix@ensam.eu Abstract Heating green wood logs by infrared (IR-line IR heating system installed on the peeling lathe. Keywords: green wood; heating; infrared; modelingRational production of veneer by IR-heating of green wood during peeling: Modeling experiments Anna

  8. SECTION 50 Table of Contents 50 Lake Rufus Woods Management Plan .........................................................2

    E-Print Network [OSTI]

    and formation of the Subbasin Work Teams and the process used to develop and adopt the management plan can50-1 SECTION 50 ­ Table of Contents 50 Lake Rufus Woods Management Plan .........................................................................28 #12;50-2 50 Lake Rufus Woods Management Plan The Lake Rufus Woods Subbasin Management Plan

  9. European Institute for Wood Preservation Congress 4-6 September 2008, Lausanne, Switzerland

    E-Print Network [OSTI]

    developments A. Wood raw materials (roundwood) B. Sawn softwood C. Wood energy V. Conclusions VI" In 2007, US housing construction continued its sharp decline, severely impacting world markets. Green building systems are a market driver, but also a constraint. UNECE region consumption of wood and paper

  10. EFFECTS OF SAMPLE SIZE ON CHARACTERIZATION OF WOOD-PARTICLE LENGTH DISTRIBUTION

    E-Print Network [OSTI]

    EFFECTS OF SAMPLE SIZE ON CHARACTERIZATION OF WOOD-PARTICLE LENGTH DISTRIBUTION Quang V. Cao of sample size on fitting length distribution of wood particles used for manufacturing wood-based composites moments and the ability of the sample distributions to characterize the population represented

  11. Presentation 2.6: Wood waste for energy: lessons learnt from tropical regions Paul Vantomme

    E-Print Network [OSTI]

    Presentation 2.6: Wood waste for energy: lessons learnt from tropical regions Paul Vantomme of forest products with more value adding, and promoting the use of wood waste to increase energy efficiency to promote the use of wood waste for energy production. Not only the financial viability of the process needs

  12. Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding

    E-Print Network [OSTI]

    Dalang, Robert C.

    Matrix penetration in the bulk:In uence of humidity: Morphological analysis of wood welding.pichelin@b .ch Context: Wood can be welded using linear vibration welding tech- niques similar to the ones in plastic and metal industry[1] . Wood welding allows bonding strength similar to glued joints. However, due

  13. Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC

    E-Print Network [OSTI]

    Streamlined LCA of Wood Pellets: Export and Possible Utilization in UBC Boiler House CHBE 573 Ann Pa May 15, 2009 #12;2 | P a g e INTRODUCTION Wood pellets are a type of biofuels and are often made. Like all biofuels, wood pellets are carbon- neutral and renewable and are very popular in Europe

  14. Net carbon fluxes at stand and landscape scales from wood bioenergy harvests in the US Northeast

    E-Print Network [OSTI]

    Vermont, University of

    gas emissions implications of wood biomass (`bioenergy') harvests are highly uncer- tain yet of great') on long-term green- house gas emissions are uncertain (McKechnie et al., 2011), yet demand for wood (C) emitted from wood bioenergy may eventually be re-sequestered through regeneration and increased

  15. Management of Discarded Treated Wood Products: A Resource Guide for Generators

    E-Print Network [OSTI]

    Florida, University of

    Management of Discarded Treated Wood Products: A Resource Guide for Generators Prepared by have been conducting research on treated wood since 1996. During the course of the research, there have been numerous inquiries about the disposal and management options for treated wood products. There has

  16. Alternative Chemicals and Improved Disposal-End Management Practices for CCA-treated Wood

    E-Print Network [OSTI]

    Florida, University of

    Alternative Chemicals and Improved Disposal-End Management Practices for CCA-treated Wood (FINAL Importation Associated with CCA-Treated Wood Use APPENDIX B: MSDS Sheets for Alternative Chemicals APPENDIX C Members A-1 B-1 C-1 D-1 E-1 F-1 G-1 ATTACHMENT: Treated Wood Resource Book #12;ii This page left

  17. Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya

    E-Print Network [OSTI]

    Florida, University of

    Preservative leaching from weathered CCA-treated wood Timothy Townsenda,*, Brajesh Dubeya , Thabet copper arsenate (CCA)-treated wood in landfills raises concerns with respect to leaching of preservative compounds. When unweathered CCA-treated wood is leached using the toxicity characteristic leaching procedure

  18. Implications for the Future of Treated Wood in Four U.S. Demand Sectors

    E-Print Network [OSTI]

    Implications for the Future of Treated Wood in Four U.S. Demand Sectors Todd F. Shupe Associate extends the life span of lumber, but the Environmental Protection Agency says arsenic treated wood might arsenic-treated wood from Florida's public playgrounds failed to pass. "Wave of opponents kills Crow

  19. Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective

    E-Print Network [OSTI]

    Wu, Qinglin

    Attitudes and Awareness about Treated Wood Products: The U.S. South Homeowner Perspective is preservative-treated (SFPA 2004). In light of increasing market penetration from non-wood alternatives homeowner attitudes and awareness about using treated wood Strategic decisions can be made to better

  20. U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood

    E-Print Network [OSTI]

    U.S. Playground Equipment Manufacturer and Purchaser Perceptions of Treated Wood Todd F. Shupe treated wood might cut life short for our children. "EPA chops down potential killer", 24 Hour News 8, Florida, after his bill to ban arsenic-treated wood from Florida's public playgrounds failed to pass

  1. Quantities of Arsenic-Treated Wood in Demolition Debris Generated by

    E-Print Network [OSTI]

    Florida, University of

    Research Quantities of Arsenic-Treated Wood in Demolition Debris Generated by Hurricane Katrina B R of the demolition debris is wood waste of which a significant proportion is treated with preservatives, including preservatives containing arsenic. As a result of the large scale destruction of treated wood structures

  2. Mechanical characteristics of aged Hinoki (Chamaecyparis obtusa Endl.) wood from Japanese historical buildings

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    historical buildings -Comparative analyses with accelerated aging wood- Misao YOKOYAMA*1 , Joseph GRIL*1 Abstract Wood is present in many cultural heritage objects thanks to its capacity to resist odvantage with mechanical characteristics of aged hinoki (Chamaecyparis obtusa Endl.) wood of Japanese historical buildings

  3. Society of Wood Science and Technology Convention 10-12 November 2008, Concepcin, Chile

    E-Print Network [OSTI]

    Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Global #12;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Subjects;Society of Wood Science and Technology Convention 10-12 November 2008, Concepción, Chile Main sources

  4. Name: Qinglin Wu Title: Roy O Martin Sr. Professor, Composites and Engineered Wood Products

    E-Print Network [OSTI]

    (ASTM), Philadelphia, PA · Forest Products Society, Madison, WI · Society of Wood and Science Technology Organizations · International Research Group in Wood Preservation, Stockholm, Sweden · American Chemical Society (ACS) · American Wood Preservation Association (AWPA) · American Society for Testing and Materials

  5. Final Independent External Peer Review Report Melvin Price Wood River Underseepage

    E-Print Network [OSTI]

    US Army Corps of Engineers

    EXECUTIVE SUMMARY Project Background and Purpose The purpose of the Melvin Price Wood River Underseepage Price Wood River LRR and the overall scope of the project, the final panel members were selectedFinal Independent External Peer Review Report Melvin Price Wood River Underseepage Limited

  6. APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS'

    E-Print Network [OSTI]

    APPLICATION OF NELSON'S SORPTION ISOTHERM TO WOOD COMPOSITES AND OVERLAYS' Qinglin Wu Assistant. It was found that Nelson's model can be used to describe the experimental data from different composite composite materials (Suchsland 1972). These relationships, known as sorption isotherms, greatly affect

  7. Influence of Nanoclay on Properties of HDPE/Wood Composites

    E-Print Network [OSTI]

    Influence of Nanoclay on Properties of HDPE/Wood Composites Yong Lei,1 Qinglin Wu,1 Craig M Agricultural Center, Baton Rouge, Louisiana 70803 2 Performance Engineered Composites, USDA Forest ServiceScience (www.interscience.wiley.com). ABSTRACT: Composites based on high density polyeth- ylene (HDPE), pine

  8. Bryan H. Wood Assistant Deputy Commandant of the Marine Corps

    E-Print Network [OSTI]

    and stations throughout the world and for the operating forces across the U.S. Marine Corps. Mr. Wood advisor to the Commander, Combined Joint Task Force- Horn of Africa (CJTF-HOA) in Djibouti, Africa. Mr as the Environmental Law Section Head and Senior Associate Counsel (Environment/ Safety), Naval Sea Systems Command

  9. AN EXAMINATION OF WOOD RECYCLING PROVISIONS IN NORTH AMERICAN GREEN

    E-Print Network [OSTI]

    American green building standards, with use of such materials awarded or specified. Construction-consumer materials shall be considered as recycled. In addition to reviewing provisions of various green building! ! ! AN EXAMINATION OF WOOD RECYCLING PROVISIONS IN NORTH AMERICAN GREEN BUILDING PROGRAMS DR. JIM

  10. Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III*

    E-Print Network [OSTI]

    Hamza, Iqbal

    Physiological Insights Towards Improving Fish Culture L. CURRY WOODS III* Department of Animal, and American Fisheries Society (AFS) Fish Culture Section, was held February 26 through March 2, 2007, in San Antonio, Texas. At this meeting, the AFS Fish Culture and Fish Physiol- ogy Sections co

  11. Wood Residues as Fuel Source for Lime Kilns

    E-Print Network [OSTI]

    Azarniouch, M. K.; Philp, R. J.

    1984-01-01T23:59:59.000Z

    One of the main obstacles to total energy self sufficiency of kraft mills appears to be the fossil fuel requirements of the lime kilns. If an economical technology can be developed which allows fossil fuel to be replaced in whole or in part by wood...

  12. Measuring Interfacial Stiffness of Adhesively-Bonded Wood

    E-Print Network [OSTI]

    Nairn, John A.

    , the interfaces will fail, the elements will cease to share load, and the composite will have poor properties property. Nearly all methods for characterizing wood adhesive bonds consider only strength of the bonds. Typically a bond line is loaded until failure and the final load at failure is recorded. Some common

  13. Marketing of Tropical Hardwood Wood Products from Ghana

    E-Print Network [OSTI]

    productive · Causes: farming, bush fires, fuel wood, wasteful logging practices, mining and quarrying #12;Fuelwood #12;Current Industry Structure · 8% of GDP · 250 companies involved in primary operations · 180 companies in secondary operations · Over 200 companies involved in tertiary operations · General

  14. 14 November 2010 Wood SA & Timber Times FOREST HEALTH

    E-Print Network [OSTI]

    14 November 2010 Wood SA & Timber Times FOREST HEALTH Aprogramme that begun based on a very small other disciplines within reach of a dynamic forestry industry. Three South African forestry companies was formally launched in 1990.The research directors of these companies Neville Denison (Mondi),Mike Shaw

  15. Pellet Production Wood Pellets are made by compressing

    E-Print Network [OSTI]

    Pellet Production Wood Pellets are made by compressing clean dry sawdust, under very high pressure into a pellet as it cools. The material used for producing pellets usually comes from industries who are already pellets reduces the volume of material they have to treat as waste, reducing landfill. Pellets have

  16. Vertical feed stick wood fuel burning furnace system

    DOE Patents [OSTI]

    Hill, Richard C. (Orono, ME)

    1982-01-01T23:59:59.000Z

    A stove or furnace for efficient combustion of wood fuel includes a vertical feed combustion chamber (15) for receiving and supporting wood fuel in a vertical attitude or stack. A major upper portion of the combustion chamber column comprises a water jacket (14) for coupling to a source of water or heat transfer fluid for convection circulation of the fluid. The locus (31) of wood fuel combustion is thereby confined to the refractory base of the combustion chamber. A flue gas propagation delay channel (34) extending laterally from the base of the chamber affords delayed travel time in a high temperature refractory environment sufficient to assure substantially complete combustion of the gaseous products of wood burning with forced air prior to extraction of heat in heat exchanger (16). Induced draft draws the fuel gas and air mixture laterally through the combustion chamber and refractory high temperature zone to the heat exchanger and flue. Also included are active sources of forced air and induced draft, multiple circuit couplings for the recovered heat, and construction features in the refractory material substructure and metal component superstructure.

  17. Performance of Wood-Frame Structures during Hurricane Katrina

    E-Print Network [OSTI]

    Cox, Dan

    Performance of Wood-Frame Structures during Hurricane Katrina John W. van de Lindt, M.ASCE1 ; Andrew Graettinger, M.ASCE2 ; Rakesh Gupta, M.ASCE3 ; Thomas Skaggs, M.ASCE4 ; Steven Pryor, M.ASCE5 ; and Kenneth J. Fridley, M.ASCE6 Abstract: The costliest natural disaster in U.S. history was Hurricane Katrina

  18. Practical Approach to Designing Wood Roof Truss Assemblies

    E-Print Network [OSTI]

    Gupta, Rakesh

    Practical Approach to Designing Wood Roof Truss Assemblies Rakesh Gupta, M.ASCE1 ; and Pranueng to evaluate "system effects" in light-frame roof truss assemblies. The goal of this study was to develop an improved and practical design method for 3D roof truss assemblies used in residential construction. A truss

  19. U.S. Homeowner of Perceptions of Treated Wood

    E-Print Network [OSTI]

    U.S. Homeowner of Perceptions of Treated Wood Todd F. Shupe Extension Specialist Forest Products% Naturally durable species (cedar, redwood) 19% 56% 25% Treated lumber products 18% 67% 15% Untreated lumber Stating Agree or Strongly Agree Plastic 3.6 55% Steel 3.4 48% Treated Lumber 3.3 38% Concrete 2.8 24

  20. Wood-Coal Fired "Small" Boiler Case Study

    E-Print Network [OSTI]

    Pincelli, R. D.

    1980-01-01T23:59:59.000Z

    Galaxy Carpet Corporation installed a coal and wood waste fired boiler approximately twelve months ago. Its first year net savings were $195,000.00 Total capital investment was paid off in 1.9 years. 20% investment tax credits were granted...

  1. HISTORICAL WOOD COLLECTION AT THE DENDROCHRONOLOGY LABORATORY, VYTAUTAS MAGNUS

    E-Print Network [OSTI]

    investigations. Subfossil oaks from river gravels, pines from peat bogs and wood from archeological excavations.) samples were collected in two peat bogs with pine trunks embedded in oligotrophic peat layers. One more than 300 samples of pine stumps and stems preserved in oligotrophic peat layers were coll

  2. Production of chemical feedstock by the methanolysis of wood

    DOE Patents [OSTI]

    Steinberg, M.; Fallon, P.

    1983-06-01T23:59:59.000Z

    A process is discussed for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700/sup 0/C to 1200/sup 0/C, at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  3. In-Depth Temperature Profiles in Pyrolyzing Wood

    E-Print Network [OSTI]

    Reszka, Pedro

    of experimental in-depth temperature measurements were done in wood samples exposed to various intensities of radiant heat fluxes, with clearly defined boundary conditions that allow a proper input for pyrolysis models. The imposed heat fluxes range from 10 k...

  4. Production of chemical feedstock by the methanolysis of wood

    DOE Patents [OSTI]

    Steinberg, Meyer (Melville, NY); Fallon, Peter (East Moriches, NY)

    1984-07-31T23:59:59.000Z

    A process for the production of ethylene, benzene and carbon monoxide from particulated biomass such as wood by reaction with methane at a temperature of from 700.degree. C. to 1200.degree. C., at a pressure of from 20 psi to 100 psi for a period of from 0.2 to 10 seconds.

  5. INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa

    E-Print Network [OSTI]

    Boyer, Edmond

    INFLUENCE OF TORREFACTION TREATMENT ON WOOD POWDER PROPERTIES M. Almendrosa , O. Bonnefoyb , A de Saint-Etienne (EMSE), 158, Cours Fauriel, F-42023 Saint-Etienne, France ABSTRACT: Torrefaction and makes the grinding easier. Our project deals with the study of the effects of the combined torrefaction

  6. The Wood-Based Biorefinery in a Petroleum Depleted World

    E-Print Network [OSTI]

    Chatterjee, Avik P.

    3 Year Old Willow #12;14 14 Woody Biomass Feedstocks Sustainably harvested low value wood from, Sustainable Bioproducts: Fuels, Chemicals, Materials Renewable Resources to "Green" Bio-Products Woody Biomass Feedstock #12;5 5 Spindletop at Beaumont, TX Circa late 1890's Birth of the Petroleum Industry in Texas

  7. Page 2 of 4 TREE Cookies Etc. Got Woods -continued

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    of a forester is to help sell timber, though they can and should be used to write management plans, manage tree plantings, implement intermediate tending treatments to improve the woods, design soil stabilization the tree, the rays (the lateral transporting structures for water and nutrients) are blocked. Finally

  8. a. Lngsamt & adiabatiskt reversibel, dvs en isentropisk process V1 = nRT1 / p1 = (m/M) RT1/p1 , massa m = 1 kg

    E-Print Network [OSTI]

    Zevenhoven, Ron

    Svar 1303: a. Långsamt & adiabatiskt reversibel, dvs en isentropisk process V1 = n·R·T1 / p1 = (m/M) ·R·T1/p1 , massa m = 1 kg H2 : M = 0.002 kg/mol; CO : M = 0.028 kg/mol; CO2 : M = 0.044 kg/mol p1 = z bar V1 = (R/M) · (300 + 50·a) / z m3 . t.ex. 30066 : p = 3 bar, gas = CO, T1 = 450 K V1 = 0.445 m3

  9. Woodfuel Usage Update 1 I Wood fuel use in Scotland 2012 I Hudson Consulting I November 2012

    E-Print Network [OSTI]

    furnish of 150k odt/yr in 2012. 9. Including wood going for the production of pellets, usage of wood in progress 3.3. Wood fuel usage by fuel category 3.4. Pellet plants 3.5. Greenhouse gas emissions 4 to 1.073 million odt in 2014. 8. Four wood pellet manufacturing plants in Scotland used in total some

  10. U.S. Home Builder Perceptions about Treated Wood:Summary Richard P. Vlosky, Ph.D.1

    E-Print Network [OSTI]

    U.S. Home Builder Perceptions about Treated Wood:Summary Richard P. Vlosky, Ph.D.1 Professor for wood. In areas subject to a high risk of decay, wood that is preservative treated is often recommended alternatives to treated wood in certain applications, but this may result in higher costs, higher energy

  11. URBAN WOOD/COAL CO-FIRING IN THE NIOSH BOILER PLANT

    SciTech Connect (OSTI)

    James T. Cobb Jr.

    2005-02-10T23:59:59.000Z

    Phase I of this project began by obtaining R&D variances for permits at the NIOSH boilerplant (NBP), Emery Tree Service (ETS) and the J. A. Rutter Company (JARC) for their portions of the project. Wood for the test burn was obtained from the JARC inventory (pallets), Thompson Properties and Seven D Corporation (construction wood), and the Arlington Heights Housing Project (demolition wood). The wood was ground at ETS and JARC, delivered to the Three Rivers Terminal and blended with coal. Three one-day tests using wood/coal blends of 33% wood by volume (both construction wood and demolition wood) were conducted at the NBP. Blends using hammermilled wood were operationally successful. Emissions of SO{sub 2} and NOx decreased and that of CO increased when compared with combusting coal alone. Mercury emissions were measured and evaluated. During the first year of Phase II the principal work focused upon searching for a replacement boilerplant and developing a commercial supply of demolition wood. The NBP withdrew from the project and a search began for another stoker boilerplant in Pennsylvania to replace it on the project. Three potential commercial demolition wood providers were contacted. Two were not be able to supply wood. At the end of the first year of Phase II, discussions were continuing with the third one, a commercial demolition wood provider from northern New Jersey. During the two-and-a-third years of the contract extension it was determined that the demolition wood from northern New Jersey was impractical for use in Pittsburgh, in another power plant in central New Jersey, and in a new wood gasifier being planned in Philadelphia. However, the project team did identify sufficient wood from other sources for the gasifier project. The Principal Investigator of this project assisted a feasibility study of wood gasification in Clarion County, Pennsylvania. As a result of the study, an independent power producer in the county has initiated a small wood gasification project at its site. Throughout much of this total project the Principal Investigator has counseled two small businesses in developing a waxed cardboard pellet business. A recent test burn of this biofuel appears successful and a purchase contract is anticipated soon. During the past two months a major tree-trimming firm has shown an active interest in entering the wood-chip fuel market in the Pittsburgh area and has contacted the NBP, among others, as potential customers. The NBP superintendent is currently in discussion with the facilities management of the Bruceton Research Center about resuming their interest in cofiring this renewable fuel to the stoker there.

  12. Cost, time, and benefit measures for personal use fuel-wood collection in Colorado. Forest Service research paper

    SciTech Connect (OSTI)

    Betters, D.R.; Markstrom, D.C.; Aukerman, R.

    1990-01-01T23:59:59.000Z

    The average fuel-wood collector is willing to pay, beyond current perceived costs, an additional $21 to $29 per cord in order to continue collecting fuel-wood. The difference between willingness-to-pay estimates for fuel-wood collection and for wood purchased from a commercial vendor is assumed to present recreational value of fuel-wood collection. On that basis, the recreation values for the average collection is estimated to be between $6 and $12 per cord.

  13. Wood-boring Insects of Trees and Shrubs

    E-Print Network [OSTI]

    Drees, Bastiaan M.; Jackman, John A.; Merchant, Michael E.

    2008-06-17T23:59:59.000Z

    termites, carpenter bees and carpenter ants. Many other insects live in dying or dead trees, including natural enemies (predators and parasites) of the insect borers, sap or fungi feeders, or species which merely use the spaces provided by the tunnels... segments behind the head capsule. While tunneling, larvae continually pack their tunnels with excrement (frass), which looks like compressed wood fibers, or push frass out of the holes they pro- duce. This excrement, along with the sap exuded by the plant...

  14. Performance of bolted wood connections using supplemental confining devices

    E-Print Network [OSTI]

    Stromatt, Rebecca Faye

    1996-01-01T23:59:59.000Z

    (1994) currently restricts the use of 2x dimensioned lumber for sill plates (nominal lumber thickness of The style and format of this thesis follow the Journal of Structural Engineering. 38. 1 mm [1. 5 in]) and requires the use of 3x dimensioned... lumber (nominal lumber thickness of 63. 5 mm [2. 5 in]). While a thicker wood member would increase the strength capacity of the connection according to analytical strength models, the ultimate failure mode under extreme loading conditions can still...

  15. An evaluation of atmospheric evaporation for treating wood preserving wastes

    E-Print Network [OSTI]

    Shack, Pete A

    1976-01-01T23:59:59.000Z

    i. hat a constant rate of total organi carbon and chemical oxygen demand removal occurred as the wastewai. r was evaporated. A procedure for designing atmospheric evaporation ponds was developed and applied to a hypothetical wood preserving plant.... From this example design estimates of equivalent hydrocarbon concentrations in the air downwind of the pond are made. Various other design con- siderations such as the input data, modifications to the design pro- cedure, solids accumulation...

  16. The treatment of wood preserving wastes with activated carbon

    E-Print Network [OSTI]

    Pence, Robert Fuller

    1978-01-01T23:59:59.000Z

    requirement and treatment schemes should be based on these combined requirements. Current treatment schemes employed in the wood preserving industry combine physical, chemical, and biological processes and operations in treating wastewaters. Jones, et al...-five of the plants performed secondary treatment on-site of which 32 used biological methods. Only 6 per- cent discharged their wastewaters directly to the environment without any form of treatment and approximately 40 percent of the plants planned to change...

  17. K.G. Mehrotra et al. (Eds.): IEA/AIE 2011, Part I, LNAI 6703, pp. 186198, 2011. Springer-Verlag Berlin Heidelberg 2011

    E-Print Network [OSTI]

    Boyer, Edmond

    K.G. Mehrotra et al. (Eds.): IEA/AIE 2011, Part I, LNAI 6703, pp. 186198, 2011. Springer on Industrial, Engineering and other Applications of Applied Intelligent Systems IEA/AIE 2011 6703 (2011)" #12

  18. Method for predicting dry mechanical properties from wet wood and standing trees

    DOE Patents [OSTI]

    Meglen, Robert R.; Kelley, Stephen S.

    2003-08-12T23:59:59.000Z

    A method for determining the dry mechanical strength for a green wood comprising: illuminating a surface of the wood to be determined with light between 350-2,500 nm, the wood having a green moisture content; analyzing the surface using a spectrometric method, the method generating a first spectral data, and using a multivariate analysis to predict the dry mechanical strength of green wood when dry by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data obtained from a reference wood having a green moisture content, the second spectral data correlated with a known mechanical strength analytical result obtained from a reference wood when dried and having a dry moisture content.

  19. Colorado School of Mines Nov-12 Cylindrical or mortise lock aluminum, wood or steel door

    E-Print Network [OSTI]

    Colorado School of Mines Nov-12 Cylindrical or mortise lock aluminum, wood or steel door Hinges 4 cylindrical or mortise lock aluminum, wood or steel door Hinges 4.5"x4.5" Ives 5BB1HW El Hinge 4.5"x4 FS18S OR FS444 #12;Colorado School of Mines Nov-12 Aluminum, wood or steel door with panic bar Hinges

  20. Issues in the use of wood as an energy source in the northeastern US

    SciTech Connect (OSTI)

    Munson, J.S. (ed.)

    1980-05-01T23:59:59.000Z

    This report analyzes some of the concerns surrounding the use of wood for energy in the Northeast. It reviews the information on resource availability and ownership patterns in the Northeast, then focuses on New England, to assess the affect of potential resource constraints on the supply of wood available for energy and the effects of wood energy use on land use patterns. Finally, the application of specific technologies in settings that may experience significant wood energy use in the future is considered, including an assessment of the regional employment and income benefits of a major woodfuel installation.

  1. A review of "The Life of Anthony Wood In His Own Words" edited by Nicholas Kiessling

    E-Print Network [OSTI]

    Paleit, Edward

    2011-01-01T23:59:59.000Z

    authors exasperating, it is a vital form of exasperation. And whatever the exasperation, Genre and Women?s Life Writing in Early Modern England is much better reading than most blogs. Nicholas Kiessling, ed. #31;e Life of Anthony Wood In His Own Words...;#30;#21;#31; until retrieved by more recent scholarship, especially in the case of women. Anthony Wood, or as he later called himself, ? Wood, the historian of Oxford University and biographer of its alumni, was more fortunate. Wood wrote two manuscript...

  2. Techno-economic analysis of wood biomass boilers for the greenhouse industry

    SciTech Connect (OSTI)

    Chau, J. [University of British Columbia, Vancouver; Sowlati, T. [University of British Columbia, Vancouver; Sokhansanj, Shahabaddine [ORNL; Bi, X.T. [University of British Columbia, Vancouver; Preto, F. [Natural Resources Canada; Melin, Staffan [University of British Columbia, Vancouver

    2009-01-01T23:59:59.000Z

    The objective of this study is to perform a techno-economic analysis on a typical wood pellet and wood residue boiler for generation of heat to an average-sized greenhouse in British Columbia. The variables analyzed included greenhouse size and structure, boiler efficiency, fuel types, and source of carbon dioxide (CO2) for crop fertilization. The net present value (NPV) show that installing a wood pellet or a wood residue boiler to provide 40% of the annual heat demand is more economical than using a natural gas boiler to provide all the heat at a discount rate of 10%. For an assumed lifespan of 25 years, a wood pellet boiler system could generate NPV of C$259,311 without electrostatic precipitator (ESP) and C$74,695 with ESP, respectively. While, installing a wood residue boiler with or without an ESP could provide NPV of C$919,922 or C$1,104,538, respectively. Using a wood biomass boiler could also eliminate over 3000 tonne CO2 equivalents of greenhouse gases annually. Wood biomass combustion generates more particulate matters than natural gas combustion. However, an advanced emission control system could significantly reduce particulate matters emission from wood biomass combustion which would bring the particulate emission to a relatively similar level as for natural gas.

  3. Microsoft Word - CX-RedmondWoodPoles_multiSub_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    5, 2011 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacement at selected...

  4. Microsoft Word - CX-FY11PascoDistrictWoodPoleReplacement_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    1, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Toby Cossairt Lineman Foreman III - TFPF-PASCO Proposed Action: Wood pole replacement and minor...

  5. Microsoft Word - CX-AlveyDistrictWoodPoles-FY14_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    8, 2014 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacey Hensley Project Manager - TEP-TPP-4 Proposed Action: 2014 Alvey District Wood Pole...

  6. Microsoft Word - CX-BigEddy-RedmondWoodPoles_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    1 REPLY TO ATTN OF: KEP-Celilo SUBJECT: Environmental Clearance Memorandum Darrell Aaby Line Foreman III - TFDF-Redmond Proposed Action: Wood pole replacements at select locations...

  7. Microsoft Word - CX-FY11WenatcheeDistrictWoodPoleReplacement...

    Broader source: Energy.gov (indexed) [DOE]

    4, 2011 REPLY TO ATTN OF: KEPR-PASCO SUBJECT: Environmental Clearance Memorandum Terry Kugler Lineman Foreman III - TFWF-SCHULTZ Proposed Action: Wood pole replacement and minor...

  8. Microsoft Word - CX-CowlitzTaptoChehalis-CovingtonWoodPoles_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    8, 2011 REPLY TO ATTN OF: KEPR-Covington SUBJECT: Environmental Clearance Memorandum Clay Grande Line Foreman III - TFCF-Covington Proposed Action: Wood pole replacement at...

  9. Microsoft Word - CX-RossDistrictWoodPolesFY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    9, 2013 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Stacie Hensley Realty Specialist - TEP-TPP-4 Proposed Action: 2013 Ross District Wood Pole...

  10. Microsoft Word - CX-PilotButte-LaPine-WoodPoles-FY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    3, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Wood pole replacements on Bonneville Power...

  11. Microsoft Word - CX-Chehalis-CentraliaNo2WoodPolesFY12_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    0, 2012 REPLY TO ATTN OF: KEPROlympia SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: Wood pole structure replacements on...

  12. Microsoft Word - CX-KalispellTLMDistrictFY11WoodPoleReplacement...

    Broader source: Energy.gov (indexed) [DOE]

    Bell-1 SUBJECT: Environmental Cleareance Memorandum Michael Stolfus Lineman Foreman III - TFKF-Kalispell Kurt Marsh Lineman Foreman I - TFKF-Kalispell Proposed Action: Wood pole...

  13. WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions

    E-Print Network [OSTI]

    WOODS FOR LEARNING ACTION PLAN 2010-2013 Objective National Indicators Specific actions Lead positive inspection reports Develop Forest Kindergarten with nurseries in both private and state sectors

  14. Laguna Woods, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to: navigation,working-groups <LackawannaLago Vista, Texas:Hills,Woods,

  15. Water Sampling At International Geothermal Area, New Zealand (Wood, 2002) |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED Jump to: navigation,Area (Wood, 2002) Jump to: navigation,Open

  16. Wood-Ridge, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy Resources JumpWood, Wisconsin: Energy Resources

  17. Wood County, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind Project JumpWisconsin: Energy ResourcesWolverine JumpWood

  18. Lake of the Woods, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf Kilauea Volcano, Hawaii9969995°,ILEDSGP/joinHavasuPalmdaleLakeWoods,

  19. Woods County, Oklahoma: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy ResourcesWoods County, Oklahoma: Energy Resources Jump

  20. Woods Hole, Massachusetts: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: Energy ResourcesWoods County, Oklahoma: Energy Resources

  1. Wood and Pellet Heating Basics | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 Russian Nuclear Warheads|ofEvents »SSL BasicsKawtarSue CangeWendeWood and Pellet

  2. Hancock-Wood Electric Coop Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG| Open EnergyGuntersvilleHallandaleHamlinHanauOhio:Hancock-Wood

  3. Meadow Woods, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville, Ohio: Energy8429°, -88.864698° ShowMeade County, Kansas:Acres,Woods,

  4. Wood-Composites Industry Benefits from ALS Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhat is abig worldFélicieTeresaConcernswithWood

  5. Journal of Hazardous Materials A135 (2006) 2131 Leaching of chromated copper arsenate (CCA)-treated wood in a

    E-Print Network [OSTI]

    Florida, University of

    2006-01-01T23:59:59.000Z

    . Monofills are a type of landfill designed and operated to dispose a single waste type, such as ash, tires-treated wood is commingled with untreated wood as part of recycling operations, the mulch product produced

  6. Seismic design of a current woodframe structure and study of innovative products and damping systems in wood construction

    E-Print Network [OSTI]

    Mahjoub, Nina A. (Nina Azadeh)

    2007-01-01T23:59:59.000Z

    Wood structures have seen resurgence in popularity over the past several decades, especially in Western States of America, such as California. The industry keeps creating new structural wood products of exceptional strength, ...

  7. International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007

    E-Print Network [OSTI]

    International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007 Photo: NTC+Hannover, Germany, 17-18 May 2007 Photo: NTC Photo: Stora Enso Photo: Stora Enso Topics I. Background for bioenergy;International Conference on Wood-based Bioenergy LIGNA+Hannover, Germany, 17-18 May 2007 Photo: NTC Photo: Stora

  8. Mid-infrared absorption properties of green wood Anna Dupleix Domingos De Sousa Meneses

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ORIGINAL Mid-infrared absorption properties of green wood Anna Dupleix · Domingos De Sousa Meneses and the amount of energy absorbed by green wood under infrared (IR) radiation. This lack of knowledge is a potential barrier to the development of IR heating as an alternative to soaking as a means of warming logs

  9. Influences of Government Interventions on Increasing Value-Added Wood Product Exports from Ghana

    E-Print Network [OSTI]

    Influences of Government Interventions on Increasing Value-Added Wood Product Exports from Ghana exporting raw materials such lumber to exporting processed or value-added wood products. In the mid-1990s on increasing value-added exports. These actions are: 1) the imposition of a levy on air-dried lumber exports, 2

  10. Field Document No.50 REGIONAL WOOD ENERGY DEVELOPMENT PROGRAMME IN ASIA

    E-Print Network [OSTI]

    AND TOMORROW IN ASIA #12;This publication is printed by the FAO Regional Wood Energy Development Programme wood energy data, leading to best estimates of future consumption. It also tries to estimate development in other relevant sectors like agriculture and energy is also strongly recommended. The document

  11. Forestry building a future in the South Southern Wood Council Forest Products Scholarship

    E-Print Network [OSTI]

    Hickman, Mark

    Forestry ­ building a future in the South Southern Wood Council Forest Products Scholarship attached): A written submission (no more than 1 page double sided) on why you are pursuing Forestry APPLICATIONS WILL BE ACCEPTED #12; Forestry ­ building a future in the South SOUTHERN WOOD COUNCIL FOREST

  12. ECOLOGICAL NOTES ON THE SIREX WOOD WASPS AND THEIR By H. S. HANSON.

    E-Print Network [OSTI]

    27 ECOLOGICAL NOTES ON THE SIREX WOOD WASPS AND THEIR PARASITES. By H. S. HANSON. Farnham House on the ecology of the Sirex wood-wasps and their parasites have been collected during a period of several years. The preliminary investigations were carried out by Dr. J. G. Myers, of Farnham House Laboratory, in collaboration

  13. INTRODUCTION Red wood ants play an important role in the ecology of

    E-Print Network [OSTI]

    Thomas, Len

    INTRODUCTION Red wood ants play an important role in the ecology of woodland ecosystems by virtue the ecological impor- tance of red wood ants (Gsswald, 1989) and the conser- vation concern for some species.borkin@clear.net.nz 2 Royal Society for the Protection of Birds, Etive House, Beechwood Park, Inverness, IV2 3BW, UK; e

  14. Ergonomic Solutions for the Secondary Wood Products Industry On October 17th

    E-Print Network [OSTI]

    Gazo, Rado

    Ergonomic Solutions for the Secondary Wood Products Industry On October 17th and 18th , 2001, you are invited to a conference entitled: Ergonomic Solutions for the Secondary Wood Products Industry. This seminar will be held at Executive Inn, in Louisville, Kentucky. Hear the latest developments in ergonomics

  15. Opportunities for UPC Product and Service Suppliers: The Wood Products Industry

    E-Print Network [OSTI]

    Wu, Qinglin

    product and service suppliers. #12;4 UPC Suppliers To The Wood Products Industry Twenty-seven companies.3 percent of all corporate sales for these 27 respondent companies. An additional 15 companies indicated, from the largest timbers to small lengths of wood moulding are complying with customer requirements

  16. Solar energy and multi-storey residential buildings Larry Hughes and Tylor Wood

    E-Print Network [OSTI]

    Hughes, Larry

    ERG/200702 Solar energy and multi-storey residential buildings Larry Hughes and Tylor Wood Energy.hughes@dal.ca 26 March 2007 #12;Hughes and Wood: Solar energy and multi-storey residential buildings 1 Summary This report considers the limitations on solar energy in new, multi-storey residential buildings. In a time

  17. Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania

    E-Print Network [OSTI]

    overcoming a rise in European and CIS). · Oil prices soared, stimulating wood-based biofuels and policies 16-17 September 2008, Timisoara, Romania Oil prices 0 20 40 60 80 100 120 140 2004 2005 2006 2007 with countries in the UNECE region continues to increase. · In Europe, wood products prices generally rose

  18. Historical changes in the distribution and functions of large wood in Puget Lowland rivers

    E-Print Network [OSTI]

    Montgomery, David R.

    Historical changes in the distribution and functions of large wood in Puget Lowland rivers Brian D and functions in Puget Lowland rivers from the last ~150 years of land use by comparing field data from an 11-km and with archival data from several Puget Lowland rivers. Current wood abundance is one to two orders of magnitude

  19. Uses and Desirable Properties of Wood in the 21st Century

    E-Print Network [OSTI]

    of social, economic, and environmental factors that influence wood-use trends. This article discusses plantations. Advances in biotechnology will enable tailoring wood properties of plantation trees and short are driven by social, economic, and environmental factors generally beyond the control of forest sector

  20. EFFECTS OF RESIN AND WAX ON THE WATER UPTAKE BEHAVIOR OF WOOD STRANDS

    E-Print Network [OSTI]

    Wang, Siqun

    EFFECTS OF RESIN AND WAX ON THE WATER UPTAKE BEHAVIOR OF WOOD STRANDS Yang2hang1 Post and wax are essential additives in the manufactureof composite panels such as OSB. Resin binds wood elements together while wax acts as a water repellent. The objective of this study was to investigate

  1. Cancer Mortality and Wood Dust Exposure Among Participants in the American Cancer

    E-Print Network [OSTI]

    Salzman, Daniel

    Cancer Mortality and Wood Dust Exposure Among Participants in the American Cancer Society Cancer and Paolo Boffetta, MD, MPH3 In 1994, the International Agency for Research on Cancer (IARC) classified wood dust as a human carcinogen, based on very strong evidence of a carcinogenic risk of sino-nasal cancer

  2. Biomimetic soy protein nanocomposites with calcium carbonate crystalline arrays for use as wood adhesive

    E-Print Network [OSTI]

    Biomimetic soy protein nanocomposites with calcium carbonate crystalline arrays for use as wood 2010 Available online 21 March 2010 Keywords: Wood glue Calcium carbonate Gecko adhesion Soy protein crosslinking of calcium, carbonate, hydroxyl ions in the adhesive greatly improving the water- resistance

  3. Research Article Fibre wall and lumen fractions drive wood density variation

    E-Print Network [OSTI]

    Wright, Ian

    with hydraulic strategies. Denser woods tend to operate at more negative water potentials (Ackerly 2004; Bucci et et al. 2011). Wood density has been studied in relation to hydraulic conductivity but the results.s.zieminska@gmail.com Published by Oxford University Press on behalf of the Annals of Botany Company. This is an Open Access

  4. New Lines of CCA-Treated Wood Research: In-Service and Disposal Issues

    E-Print Network [OSTI]

    Florida, University of

    New Lines of CCA-Treated Wood Research: In-Service and Disposal Issues Submitted March 19, 2001 Objectives 2 I.3 Background 4 CHAPTER II, METALS CONCENTRATIONS IN SOILS BELOW DECKS MADE OF CCA-TREATED WOOD Results from Soil Core Samples 24 II.7 Summary and Conclusions 28 CHAPTER III, INVENTORY OF CCA-TREATED

  5. A pilot study of children's exposure to CCA-treated wood from playground equipment

    E-Print Network [OSTI]

    Florida, University of

    A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat Arsenic from chromated copper arsenate (CCA)-treated wood, widely used in playgrounds and other outdoor associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11 children (13­71 months

  6. A pilot study of children's exposure to CCA-treated wood from playground equipment

    E-Print Network [OSTI]

    Florida, University of

    A pilot study of children's exposure to CCA-treated wood from playground equipment S.L. Shalat online 17 February 2006 Abstract Arsenic from chromated copper arsenate (CCA)-treated wood, widely used possible health risks associated with children playing on CCA- treated playgrounds. In a Pilot Study, 11

  7. Perception Drivers for Treated Wood by U.S. South Homebuilders and Remodelers

    E-Print Network [OSTI]

    Wu, Qinglin

    Perception Drivers for Treated Wood by U.S. South Homebuilders and Remodelers Sanna M. Kallioranta1 for the use of treated wood products in construction is considerable, especially in the U.S. South for termite protection and to mitigate moisture related decay. This research investigates the perception about treated

  8. Slovak Centre of Biomass Use for Energy Wood Fired Heating Plant in Slovakia

    E-Print Network [OSTI]

    authorities CHP Planning issues Transport companies District Heating Sustainable communities Utilities Solar the object of interest of municipalities and management of companies, is the issue of how to reconstruct out. Wood exploitation is well developed: many forestry and wood processing companies are represented

  9. DNA Extraction From Processed Wood: A Case Study for the Identification of an Endangered

    E-Print Network [OSTI]

    Protocols DNA Extraction From Processed Wood: A Case Study for the Identification of an Endangered to the extraction of whole genomic DNA from processed wood samples to explore the possibility of identifying an endangered trop- ical timber species by using DNA sequencing technology. High-yield and high-quality DNA

  10. WPMT (Fall 2009) Page 1 June 8, 2009 Wood Products Manufacturing Technology

    E-Print Network [OSTI]

    positions in wood products manufacturing, particularly for the hardwood cabinet and furniture industries to Lean Manufacturing (3) MET 14100 Materials I (4) Physics elective3 (3) STAT 30100 Elementary Sixth Semester (3) ECON 21000 Principles of Economics (3) FNR 31100 Wood Structure, Identification

  11. Determination of VOC emissions from French wood products Christophe YRIEIX *, Franois MAUPETIT **, Olivier RAMALHO **

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    wood manufacturers to determine IAQ performances of their products and to confront them with other quality (IAQ). Indeed, building products are significant sources of Volatile Organic Compounds (VOCs. This is particularly important for French wood manufacturers to determine IAQ performances of their products

  12. Illegal loggin and wood energy: UNECE Timber Committee discusses policy issues of the day SEARCH SITEMAP

    E-Print Network [OSTI]

    activities). Wood energy: "Biomass is one of the renewable energies with the greatest potential for expansion, and wood is by far the largest component of biomass energy" says Kit Prins, Chief of the UNECE Timber/FAO Timber Section Trade Development and Timber Division United Nations Economic Commission for Europe Palais

  13. A review of "John Lowin and the English Theatre, 1603-1647" by Barbara Wooding

    E-Print Network [OSTI]

    Bunker, Nancy M.

    2014-01-01T23:59:59.000Z

    assumed a more active role as a citizen with duties and responsibility over apprentices and financial oversight in the rebuilding of the Globe. Woodings commentary on the first decade 213 seventeenth-century news of Lowins career advocates for his...

  14. Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA

    E-Print Network [OSTI]

    Wood Pellets for UBC Boilers Replacing Natural Gas Based on LCA Submitted to Dr. Bi By Bernard Chan Pellets for UBC Boilers Replacing Natural Gas" By Bernard Chan, Brian Chan, and Christopher Young Abstract This report studies the feasibility of replacing natural gas with wood pellets for UBC boilers. A gasification

  15. CONTROLLING THE INTERNATIONAL TRADE IN ILLEGALLY LOGGED TIMBER AND WOOD PRODUCTS

    E-Print Network [OSTI]

    CONTROLLING THE INTERNATIONAL TRADE IN ILLEGALLY LOGGED TIMBER AND WOOD PRODUCTS A study prepared@riia.org February 2002 http://www.illegal-logging.info/uploads/1_ControllingTrade.pdf #12;Controlling the international trade in illegally logged timber and wood products Page 2 Contents EXECUTIVE SUMMARY

  16. Seismic Screening, Evaluation, Rehabilitation, and Design Provisions for Wood-Framed Structures

    E-Print Network [OSTI]

    Gupta, Rakesh

    Seismic Screening, Evaluation, Rehabilitation, and Design Provisions for Wood-Framed Structures Preston Baxter, M.ASCE1 ; Thomas H. Miller, M.ASCE2 ; and Rakesh Gupta, M.ASCE3 Abstract: Seismic Database subject headings: Seismic analysis; Seismic design; Wood structures; Shear walls; Diaphragms

  17. Provenance study and environments of deposition of the Pennslyvanian-Permian Wood River Formation, south-central Idaho, and the paleotectonic character of the Wood River basin

    E-Print Network [OSTI]

    Dean, Christopher William

    1982-01-01T23:59:59.000Z

    and provenance of the conglomerates in the Big Wood River and Fish Creek Reservoir regions of south-central Idaho is needed. Distinguishing between marine and non-marine strata and determining source terranes will aid in reconstructing Wood River basin... paleogeography and paleo- tectonics. Three source areas have been postulated in recent years: 1, The Antler highland to the west, containing volcanics and low grade metamorphic rocks (Bissell, 1960; Churkin, 1962; Roberts and Thomasson, 1964). 2. The stable...

  18. Hygrothermal Performance of West Coast Wood Deck Roofing System

    SciTech Connect (OSTI)

    Pallin, Simon B [ORNL; Kehrer, Manfred [ORNL; Desjarlais, Andre Omer [ORNL

    2014-02-01T23:59:59.000Z

    Simulations of roofing assemblies are necessary in order to understand and adequately predict actual the hygrothermal performance. At the request of GAF, simulations have been setup to verify the difference in performance between white and black roofing membrane colors in relation to critical moisture accumulation for traditional low slope wood deck roofing systems typically deployed in various western U.S. Climate Zones. The performance of these roof assemblies has been simulated in the hygrothermal calculation tool of WUFI, from which the result was evaluated based on a defined criterion for moisture safety. The criterion was defined as the maximum accepted water content for wood materials and the highest acceptable moisture accumulation rate in relation to the risk of rot. Based on the criterion, the roof assemblies were certified as being either safe, risky or assumed to fail. The roof assemblies were simulated in different western climates, with varying insulation thicknesses, two different types of wooden decking, applied with varying interior moisture load and with either a high or low solar absorptivity at the roof surface (black or white surface color). The results show that the performance of the studied roof assemblies differs with regard to all of the varying parameters, especially the climate and the indoor moisture load.

  19. Journal of Hazardous Materials B114 (2004) 7591 Leaching of CCA-treated wood: implications for waste disposal

    E-Print Network [OSTI]

    Florida, University of

    Journal of Hazardous Materials B114 (2004) 75­91 Leaching of CCA-treated wood: implications, and copper from chromated copper arsenate (CCA)-treated wood poses possible environmental risk when disposed. Samples of un-weathered CCA-treated wood were tested using a variety of the US regulatory leaching

  20. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into the Red Listed Material: Pressure Treated Wood

    E-Print Network [OSTI]

    into the Red Listed Material: Pressure Treated Wood (Preservative Infused) and Possible Alternatives Abby Yuen of a project/report". #12;APSC 261 An Investigation into the Red Listed Material: Pressure Treated Wood. Pressure treated wood, a commonly used building material in British Columbia, is a red-listed material

  1. Metal Bioavailability and Speciation in a Wetland Tailings Repository Amended with Biosolids Compost, Wood Ash, and Sulfate

    E-Print Network [OSTI]

    Brown, Sally

    Compost, Wood Ash, and Sulfate Pam S. DeVolder, Sally L. Brown,* Dean Hesterberg, and Kumi Pandya ABSTRACT tundra swans surface amendments: (i) biosolids compost plus wood ash, (ii) and other animals found in the area have tested positive compost wood ash a low SO2 4 addition as K2SO4, and (iii) for Pb poisoning

  2. (100 nmol kg21 ), KBr (92 mmol kg21

    E-Print Network [OSTI]

    Giron, David - Institut de Recherche sur la Biologie de l'Insecte, Universit Franois Rabelais

    at 60 8C. CaCO3 was calculated by subtracting POC from TPC. CaCO3 production rates were calculated from growth rates and cellular CaCO3 contents. Owing to the experimental approach used in this study (see742 (1994). 5. Broecker, W. S. & Peng, T.-H. The role of CaCO3 compen

  3. Fusion-fission reactions with modified Woods-Saxon potential

    E-Print Network [OSTI]

    Ning Wang; Kai Zhao; Werner Scheid; Xizhen Wu

    2007-12-15T23:59:59.000Z

    A modified Woods-Saxon potential model is proposed for a unified description of the entrance channel fusion barrier and the fission barrier of fusion-fission reactions based on the Skyrme energy-density functional approach. The fusion excitation functions of 120 reactions have been systematically studied. The fusion (capture) cross sections are well described with the calculated potential and an empirical barrier distribution. Incorporating a statistical model (HIVAP code) for describing the decay of the compound nucleus, the evaporation residue (and fission) cross sections of 51 fusion-fission reactions have been systematically investigated. Optimal values of some key parameters of the HIVAP code are obtained based on the experimental data of these reactions. The experimental data are reasonably well reproduced by the calculated results. The upper and lower confidence limits of the systematic errors of the calculated results are given.

  4. Environmental-performance research priorities: Wood products. Final report

    SciTech Connect (OSTI)

    NONE

    1998-01-15T23:59:59.000Z

    This report describes a research plan to establish environmental, energy, and economic performance measures for renewable building materials, and to identify management and technology alternatives to improve environmental performance in a cost-effective manner. The research plan is designed to: (1) collect environmental and economic data on all life-cycle stages of the materials, (2) ensure that the data follows consistent definitions and collection procedures, and (3) develop analytical procedures for life-cycle analysis to address environmental performance questions. The research will be subdivided into a number of individual project modules. The five processing stages of wood used to organize the research plan are: (1) resource management and harvesting; (2) processing; (3) design and construction of structures; (4) use, maintenance, and disposal; and (5) waste recycling. Individual research module descriptions are provided in the report, as well as assessment techniques, research standards and protocol, and research management. 13 refs., 5 figs., 3 tabs.

  5. Urban Wood-Based Bio-Energy Systems in Seattle

    SciTech Connect (OSTI)

    Stan Gent, Seattle Steam Company

    2010-10-25T23:59:59.000Z

    Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

  6. Continuous on-line measurement of lignin concentration in wood pulp

    SciTech Connect (OSTI)

    Jeffers, L.A.; Roman, G.W.

    1994-06-01T23:59:59.000Z

    We are working toward the development of an instrument for the continuous, on-line measurement of the lignin concentration in wood pulp. The instrument is based on laser induced fluorescence of the wood pulp and is to be used as a primary sensor for both feedback control of the pulping and feedforward control of bleaching. We report here the results of a series of laboratory tests that characterized the fluorescence properties of wood pulp and demonstrated a correlation between various fluorescence functions and the Kappa number of the pulps as determined by TAPPI Procedure T236.

  7. PSNH's Northern Wood power project repowers coal-fired plant with new fluidized-bed combustor

    SciTech Connect (OSTI)

    Peltier, R.

    2007-08-15T23:59:59.000Z

    The Northern Wood Power project permanently replaced a 50-MW coal-burning boiler (Unit 5) at Public Service of New Hampshire's Schiller station with a state-of-the-art circulating fluidized bed wood-burning boiler of the same capacity. The project, completed in December 2006, reduced emissions and expanded the local market for low-grade wood. For planning and executing the multiyear, $75 million project at no cost to its ratepayers, PSNH wins Power's 2007 Marmaduke Award for excellence in O & M. The award is named for Marmaduke Surfaceblow, the fictional marine engineer/plant troubleshoot par excellence. 7 figs., 1 tab.

  8. KG Group | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInteriasIowa: Energy ResourcesKACO Geraetetechnik GmbH JumpKEM

  9. Design and performance of a 100-kg/h, direct calcine-fed electric-melter system for nuclear-waste vitrification

    SciTech Connect (OSTI)

    Dierks, R.D.

    1980-11-01T23:59:59.000Z

    This report describes the physical characteristics of a ceramic-lined, joule-heated glass melter that is directly connected to the discharge of a spray calciner and is currently being used to study the vitrification of simulated nuclear-waste slurries. Melter performance characteristics and subsequent design improvements are described. The melter contains 0.24 m/sup 3/ of glass with a glass surface area of 0.76 m/sup 2/, and is heated by the flow of an alternating current (ranging from 600 to 1200 amps) between two Inconel-690 slab-type electrodes immersed in the glass at either end of the melter tank. The melter was maintained at operating temperature (900 to 1260/sup 0/C) for 15 months, and produced 62,000 kg of glass. The maximum sustained operating period was 122 h, during which glass was produced at the rate of 70 kg/h.

  10. Feasibility study of wood-fired cogeneration at a Wood Products Industrial Park, Belington, WV. Phase II

    SciTech Connect (OSTI)

    Vasenda, S.K.; Hassler, C.C.

    1992-06-01T23:59:59.000Z

    Customarily, electricity is generated in a utility power plant while thermal energy is generated in a heating/cooling plant; the electricity produced at the power plant is transmitted to the heating/cooling plant to power equipments. These two separate systems waste vast amounts of heat and result in individual efficiencies of about 35%. Cogeneration is the sequential production of power (electrical or mechanical) and thermal energy (process steam, hot/chilled water) from a single power source; the reject heat of one process issued as input into the subsequent process. Cogeneration increases the efficiency of these stand-alone systems by producing these two products sequentially at one location using a small additional amount of fuel, rendering the system efficiency greater than 70%. This report discusses cogeneration technologies as applied to wood fuel fired system.

  11. Electricity from wood powder report on a TPV generator in progress

    SciTech Connect (OSTI)

    Broman, L.; Jarefors, K. [Solar Energy Research Center (SERC), University College of Falun Borlange (UCFB), Box 10044, S-781 10 Borlange (Sweden); Marks, J. [Department of Operational Efficiency, Swedish University of Agricultural Sciences (SLU), Herrgardsv 122, S-776 98 Garpenberg (Sweden); Wanlass, M. [National Renewable Energy Laboratory (NREL), 1617 Cole Blvd., Golden, Colorado 80401-3393, United States of America

    1996-02-01T23:59:59.000Z

    A joint project between NREL, SLU, and UCFB aims at building a wood powder fueled TPV generator. The progress of the project is presented. {copyright} {ital 1996 American Institute of Physics.}

  12. A study of owner preferences for steel and wood framed homes

    E-Print Network [OSTI]

    Bateman, Bruce Whitney

    1997-01-01T23:59:59.000Z

    that purchased steel framed homes (SFHS) and those households that purchased wood framed homes (WFHs). The objectives of the study were (1) to determine if there were any significant differences in the demographic profiles of the two study groups, (2...

  13. Structural timber and wood procurement at the NAN Ranch Ruin in Grant County, New Mexico

    E-Print Network [OSTI]

    Bruno, Henry Lee

    1988-01-01T23:59:59.000Z

    in the field by Goodyear (1975) and tested against experimental data on lithic use- wear (Bayham 1976). Scraping and chopping were shown to leave different 13 edge wear patterns and to vary with different species of wood. The literature contains...

  14. Critical Issues for Success in the International Markets for Wood Products: Lessons Learned from Bolivia

    E-Print Network [OSTI]

    Critical Issues for Success in the International Markets for Wood Products: Lessons Learned from, where forest certification may provide an advantage. 4. Learned Lessons from the Bolivian Case 4

  15. Kevin Wood Landscape: a study in Texas Hill Country landscape design

    E-Print Network [OSTI]

    Secker, William Walker

    2002-01-01T23:59:59.000Z

    Kevin Wood Landscape resides in Austin, Texas as the premier residential landscape design firm. The firm, although small in stature, tackles a variety of projects throughout Austin and the immediate Hill Country. Close inspection within...

  16. SOLID WOOD PRODUCTS I TECHNICAL NOTE CALIBRATION OF MOISTURE METERS FOR

    E-Print Network [OSTI]

    tanks, and boats, the kiln and allowed to cool. They were content (MC) of wood. However, the cor and electrical resis- cypress have been supplied by moisture handled or conditioned. One moisture tance

  17. The Impact of the Russian Tariff on Japanese Demand for Wood Products CINTRAFOR News is

    E-Print Network [OSTI]

    far from the main demand markets. During the post-war era, Japan went from being essentially self and it is one of the few countries in Asia that favor wood frame construction. In the early 1960's, over 80

  18. Residential Bulk-Fed Wood-Pellet Central Boilers and Furnace Rebate Program

    Broader source: Energy.gov [DOE]

    The New Hampshire Public Utilities Commission (PUC) is offering rebates of 30% of the installed cost of qualifying new residential bulk-fed, wood-pellet central heating boilers or furnaces. The...

  19. Thermal properties of structural details in wood frame homes : analysis and recommendations

    E-Print Network [OSTI]

    Graybeal, Alexander Kung

    2010-01-01T23:59:59.000Z

    The wood platform frame home is the dominant design in the United States when it comes to single family housing. Introduced during the mid-nineteenth century, the scheme is a cheap, fast, and proven design that takes ...

  20. Where Wood Works Harnessing the Energy of Woody Biomass in Colorado

    E-Print Network [OSTI]

    resources such as wind, solar and biomass. Part of Our Rural Economy forest product companies now can Energy CO2 CO2 Wood Fuel Nutrients AshNutrients Woody biomass is stored solar energy that is available 24

  1. Microsoft Word - CX-Redmond-PilotButte-WoodPoleFY12_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    3, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Redmond-Pilot Butte No. 1 Wood Pole...

  2. Microsoft Word - CX-Driscoll-NaselleWood PolesFY12_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    2 REPLY TO ATTN OF: KEPAlvey SUBJECT: Environmental Clearance Memorandum Ryan Brady Line Foreman III - TFOK-Chehalis Proposed Action: In-kind wood pole replacements as needed on...

  3. Microsoft Word - CX-OregonCity-ChemawaWoodPolesFY12_WEB .docx

    Broader source: Energy.gov (indexed) [DOE]

    31, 2012 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum James Semrau Project Manager - TEP-TPP-1 Proposed Action: Oregon City-Chemawa 2 Wood Pole...

  4. Microsoft Word - CX-LaPine-ChiloquinWoodPoleFY12_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    2 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: La Pine-Chiloquin No. 1 Wood Pole Replacement...

  5. Microsoft Word - CX-AlveyDistWoodPoles_FY13_WEB.docx

    Broader source: Energy.gov (indexed) [DOE]

    Alvey District Wood Pole Replacement Projects PP&A Project No.: 2663 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location: Various...

  6. Microsoft Word - CX-Big Eddy-Redmond-WoodPolesFY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    4, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Big Eddy-Redmond No. 1 Wood Pole...

  7. Microsoft Word - CX-SpokaneDistrictWoodPoleReplacementsFY13_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    1, 2013 REPLY TO ATTN OF: KEPR-Bell-1 SUBJECT: Environmental Clearance Memorandum Amanda Williams Project Manager - TEP-TPP-1 Proposed Action: 2013 Spokane District Wood Pole...

  8. Microsoft Word - CX-Brasada-Harney-WoodPoles_FY13_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    2, 2013 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Brasada-Harney No. 1 Wood Pole Replacement...

  9. Microsoft Word - CX-NorthBendWoodPoles_FY13_WEB.docx

    Broader source: Energy.gov (indexed) [DOE]

    North Bend District Wood Pole Replacement Projects PP&A Project No.: 2658 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance Location:...

  10. Microsoft Word - CX-PilotButte-LaPineWoodPoleFY12_WEB.docx

    Broader source: Energy.gov (indexed) [DOE]

    0, 2012 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Richard Heredia Project Manager - TEP-TPP-1 Proposed Action: Pilot Butte-La Pine No. 1 Wood Pole...

  11. Microsoft Word - CX-AlveyDistrict_2011WoodPoles_No1957_WEB.doc

    Broader source: Energy.gov (indexed) [DOE]

    0, 2011 REPLY TO ATTN OF: KEP-Alvey SUBJECT: Environmental Clearance Memorandum Nick Wenzl John Carter Line Foreman III-TFE-Alvey Line Foreman I-TFE-Alvey Proposed Action: Wood...

  12. Low VOC drying of lumber and wood panel products. Progress report No. 8

    SciTech Connect (OSTI)

    Su, W.; Yan, H.; Hooda, U.; Wild, M.P.; Banerjee, S. [Inst. of Paper Science and Technology, Atlanta, GA (United States)] [Inst. of Paper Science and Technology, Atlanta, GA (United States); Shmulsky, R.; Thompson, A.; Ingram, L.; Conners, T. [Mississippi State Univ., MS (United States)] [Mississippi State Univ., MS (United States)

    1998-07-01T23:59:59.000Z

    This study was initiated by an Institute of Paper Science and Technology finding that heating softwood in a low-headspace environment removed much of the VOCs without removing the water. This offered the possibility of removing VOCs from wet wood, capturing them as a product, and then drying the VOC-depleted wood conventionally with little or no VOC controls. Two means of low-headspace heating were explored: steam and radiofrequency (RF). It was found in the previous year, that while both steam and RF were able to drive out VOCs, steam was impracticably slow for lumber. Hence the effect of RF or microwave on wood was the principal focus of the work reported here. Finally, in order to understand the mechanism of VOC release, the transport of the VOCs in wood was studied, together with the seasonal effects that influence VOC concentration in trees.

  13. Ground penetrating radar characterization of wood piles and the water table in Back Bay, Boston

    E-Print Network [OSTI]

    LeFranois, Suzanne O'Neil, 1980-

    2003-01-01T23:59:59.000Z

    Ground penetrating radar (GPR) surveys are performed to determine the depth to the water table and the tops of wood piles beneath a residential structure at 122 Beacon Street in Back Bay, Boston. The area of Boston known ...

  14. Microsoft Word - CX-ChemawaWoodPolesCT-KFG12-KOCFGT-FY12_WEB...

    Broader source: Energy.gov (indexed) [DOE]

    Chemawa District Wood Pole Replacement Projects PP&A Project No.: 2325 (Carlton-Tillamook 1, Keeler-Forest Grove 2, Keeler-Oregon City 2, Keeler-Forest Grove 1, Forest...

  15. Oxidation of volatiles in residential wood burning equipment. Final technical report, September 1980-February 1984

    SciTech Connect (OSTI)

    Malte, P.C.; Thornton, M.M.; Kamber, P.D.

    1984-04-01T23:59:59.000Z

    The objectives of this project are to measure, through the use of laboratory combustors, those conditions which promote complete combustion of wood volatiles in residential wood burning equipment. The conditions of interest are combustion temperature, residence time, stoichiometry, and air mixing. The project objectives are met through two laboratory approaches: (1) model compound studies: in order to measure the overall rates of oxidative pyrolysis of biomass volatiles, and to determine the types of intermediate organic species which are likely to form as part of this process, model compounds have been reacted in a specialized jet-stirred reactor, which has been developed as part of this research. (2) high-intensity wood combustion: in order to study the clean combustion of wood, that is, to investigate the conceptual design features required for clean burning, and to ascertain the levels and types of pollutant and condensible species which are most difficult to oxidize, a high-intensity, research wood combustor has been developed and examined for the different phases of the wood burning cycle. Although the objectives of the project have been met, it has not been possible, because of support limitations, to thoroughly explore several interesting aspects which have arisen because of this research. For example, a third laboratory system in which wood pyrolysis gas is injected directly into the a well characterized reactor, so that the kinetics and mechanisms of the gas-phase reaction of the actual biomass volatiles can be studied, could not be thoroughly developed. Refinements in the high-intensity wood combustor, which would bring its design features closer to practicality for the industry, could not be considered. 32 references, 37 figures, 10 tables.

  16. Fabrication of a 1200 kg Ingot of V-4Cr-4Ti alloy for the DIII-D Radiative Divertor Program

    SciTech Connect (OSTI)

    Johnson, W.R.; Smith, J.P.

    1998-06-01T23:59:59.000Z

    Vanadium chromium titanium alloys are attractive materials for fusion reactors because of their high temperature capability and their potential for low neutron active and rapid activation decay. A V-4Cr-4Ti alloy has been selected in the U.S. as the current leading candidate vanadium alloy for future use in fusion reactor structural applications. General Atomics (GA), in conjunction with the Department of Energy`s (DOE) DIII-D Program, is carrying out a plan for the utilization of this vanadium alloy in the DIII-D tokamak. The plan will culminate in the fabrication, installation, and operation of a V-4Ti alloy structure in the DIII-D Radiative Divertor (RD) upgrade. The deployment of vanadium alloy will provide a meaningful step in the development and technology acceptance of this advanced material for future fusion power devices. Under a GA contract and material specification, an industrial scale 1200 kg heat (ingot) of a V-4Cr-4Ti alloy has been produced and converted into product forms by Wah Chang of Albany, Oregon (WCA). To assure the proper control of minor and trace impurities which affect the mechanical and activation behavior of this vanadium alloy, selected lots of raw vanadium base metal were processed by aluminothermic reduction of high purity vanadium oxide, and were then electron beam melted into two high purity vanadium ingots. The ingots were then consolidated with high purity Cr and Ti, and double vacuum-arc melted to obtain a 1200 kg V-4Cr-4Ti alloy ingot. Several billets were extruded from the ingot, and were then fabricated into plate, sheet, and rod at WCA. Tubing was subsequently processed from plate material. The chemistry and fabrication procedures for the product forms were specified on the basis of experience and knowledge gained from DOE Fusion Materials Program studies on previous laboratory scale heats and a large scale ingot (500 kg)

  17. CUORE: An Experiment to Investigate for Neutrinoless Double Beta Decay by Cooling 750 kg of TeO2 Crystals at 10mK

    SciTech Connect (OSTI)

    Beeman, J.; Dolinski, M.; Gutierrez, T. D.; Maruyama, R.; Smith, A. R.; Xu, N. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Haller, E. E. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Dep. of Material Science and Engineering, University of California, Berkeley CA 94720 (United States); Giuliani, A.; Pedretti, M.; Sangiorgio, S. [Dipartimento di Scienze Chi., Fis. e Mat. dell'Universita dell'Insubria, Sez. INFN di Milano, 22100 Como (Italy); Barucci, M.; Olivieri, E.; Risegari, L.; Ventura, G. [Dipartimento di Fisica dell'Universita di Firenze, sez. INFN di Firenze, 50125 Florence (Italy); Balata, M.; Bucci, C.; Nisi, S. [Laboratori Nazionali del Gran Sasso, INFN, 67010 Assergi (L'Aquila) (Italy); Palmieri, V. [Laboratori Nazionali di Legnaro INFN, Via Romea 4, 35020 Legnaro (Padova) (Italy); Waard, A. de [Kamerlingh Onnes Laboratory, Leiden University, 2300 RA Leiden (Netherlands); Norman, E. B. [Lawrence Livermore National Laboratory, Livermore, California, CA 94550 (United States)] (and others)

    2006-09-07T23:59:59.000Z

    CUORE (Cryogenic Underground Observatory for Rare Events) is an experiment proposed to infer the effective Majorana mass of the electron neutrino from measurements on neutrinoless double beta decay (0{nu}DBD). The goal of CUORE is to achieve a background rate in the range 0.001 to 0.01 counts/keV/kg/y at the 0{nu}DBD transition energy of 130Te (2528 keV). The proposed experiment, to be mounted in the underground Gran Sasso INFN National Laboratory, Italy, is realized by cooling about 1000 TeO2 bolometers, of 750 g each, at a temperature of 10mK. We will describe the experiment, to be cooled by an extremely powerful dilution refrigerator, operating with no liquid helium, and the main experimental features designed to assure the predicted sensitivity. We present moreover the last results of a small scale (40.7 kg) 0{nu}DBD experiment carried on in the Gran Sasso Laboratory (CUORICINO)

  18. RobertWoodJohnson I MEDICINE 23RobertWoodJohnson I MEDICINE 23 SurgeryThat's Minimizing Everything but Results

    E-Print Network [OSTI]

    Garfunkel, Eric

    - ic surgery. Thyroidectomy. Urethral suspension. Hip arthroplasty. Video- assisted thoracic surgery;RobertWoodJohnson I MEDICINE 25 MIS Applications Are Burgeoning Locally A drian Balica, MD, assistant conservation procedures, such as endometrial ablation, using radio frequency are commonplace. "Robotic surgery

  19. Aufgabe 3-7: Luft tritt mit 1 = 2,21 kg/m und v1 = 40 m/s kontinuierlich in eine Dse ein und verlsst diese mit 2 = 0,762 kg/m und v2 = 180 m/s. Die Einlassflche der Dse betrgt 90

    E-Print Network [OSTI]

    Peters, Norbert

    Aufgabe 3-7: Luft tritt mit 1 = 2,21 kg/m³ und v1 = 40 m/s kontinuierlich in eine Düse ein und, 800 kPa) tritt mit 10 m/s in eine Düse ein (siehe Abbildung 1). In der Düse verliert der Dampf Wärme

  20. Precision wood particle feedstocks with retained moisture contents of greater than 30% dry basis

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2014-10-28T23:59:59.000Z

    Wood particles having fibers aligned in a grain, wherein: the wood particles are characterized by a length dimension (L) aligned substantially parallel to the grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) normal to W and L; the L.times.H dimensions define two side surfaces characterized by substantially intact longitudinally arrayed fibers; the W.times.H dimensions define two cross-grain end surfaces characterized individually as aligned either normal to the grain or oblique to the grain; the L.times.W dimensions define two substantially parallel top and bottom surfaces; and, a majority of the W.times.H surfaces in the mixture of wood particles have end checking.

  1. Demonstration Results From Greenhouse Heating with Liquified Wood

    SciTech Connect (OSTI)

    Steele, Philip; Parish, Don; Cooper, Jerome

    2011-07-01T23:59:59.000Z

    A boiler fuel known as Lignocellulosic Boiler Fuel (LBF) was developed at the Department of Forest Products, Mississippi State University for potential application for heating agricultural buildings. LBF was field tested to heat green houses in cooperation with Natchez Trace Greenhouses (NTG) located in Kosciusko, Mississippi. MSU modified an idled natural gas boiler located at NTG to combust the LBF. Thirty gallons of bio-oil were produced at the MSU Bio-oil Research Laboratory. The bio-oil was produced from the fast-pyrolysis of southern pine (15 gal) and white oak (15 gal) feedstocks and subsequently upgraded by a proprietary process. Preliminary field testing was conducted at (NTG). The LBF was produced from each wood species was tested separately and co-fed with diesel fuel to yield three fuel formulations: (1) 100% diesel; (2) 87.5% LBF from southern pine bio-oil co-fed with 12.5% diesel and (3) 87.5% LBF from white oak co-fed with 12.5% diesel fuel formulations. Each fuel formulation was combusted in a retrofit NTG boiler. Fuel consumption and water temperature were measured periodically. Flue gas from the boiler was analyzed by gas chromatograph. The 100% diesel fuel increased water temperature at a rate of 4 ???°F per min. for 35 min. to achieve the target 140 ???°F water temperature increase. The 87.5% pine LBF fuel cofed with 12.5%) diesel attained the 140 ???°F water temperature increase in 62 min. at a rate of 2.3 ???°F per min. The 87.5% white oak LBF fuel co-fed with 12.5% diesel reached the 140 ???°F water temperature increase in 85 min. at a rate of 1.6 ???°F per min. Fuel that contained 87.5% pine LBF co-fed with 12.5% diesel yielded nitrogen and oxygen at a ratio of 5.3 and carbon dioxide and carbon monoxide at a ratio of 22.2. Fuel formulations that contained 87.5% white oak LBF co-fed with 12.5% diesel yielded nitrogen and oxygen at a ratio of 4.9 and carbon dioxide and carbon monoxide at a ratio of 16.4. Neither the pine LBF nor the white oak LBF fuel showed any measureable methane emissions from the NTG boiler flue gas. These results indicate a viable potential for mildly upgraded bio-oil to become an alternative fuel source for greenhouse operations.

  2. Wood decomposition after five years in anaerobic nitrate rich groundwaters: Implications for lifetime of NitrexTM Permeable Reactive Barriers

    E-Print Network [OSTI]

    Vallino, Joseph J.

    decomposition at the WB barrier. Sulfate reduction: SO4 2- + 2CH2O + 2H+ 2CO2 + H2S + 2H2O 1.2. Questions 2 Abstract Permeable reactive barriers can benefit aquatic ecosystems by using wood chips to remove carbon was more important in the wood from the barriers. Keywords Nitrate removal, Permeable Reactive

  3. The Case for Certified Wood Forest products deemed sustainable are a growing part of today's green buildings

    E-Print Network [OSTI]

    , and explain the need for responsible forestry practices that keep wood building materials a truly green choiceThe Case for Certified Wood Forest products deemed sustainable are a growing part of today's green buildings October 2008 Sponsored by JELD-WEN® Windows and Doors The demand in the United States

  4. Extending the Place Glacier mass-balance record to AD 1585, using tree rings and wood density

    E-Print Network [OSTI]

    Smith, Dan

    Extending the Place Glacier mass-balance record to AD 1585, using tree rings and wood density Lisa August 2011 Keywords: Dendroclimatology Glacier mass balance Tree rings Wood density Place Glacier Recognizing that climate influences both annual tree-ring growth and glacier mass balance, changes in the mass

  5. Identification of environmental issues: Hybrid wood-geothermal power plant, Wendel-Amedee KGRA, Lassen County, California: First phase report

    SciTech Connect (OSTI)

    Not Available

    1981-08-14T23:59:59.000Z

    The development of a 55 MWe power plant in Lassen County, California, has been proposed. The proposed power plant is unique in that it will utilize goethermal heat and wood fuel to generate electrical power. This report identifies environmental issues and constraints which may impact the proposed hybrid wood-geothermal power plant. (ACR)

  6. Woodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011

    E-Print Network [OSTI]

    energy sectors of the Scottish market) to 30 December 2010. The information gained from the study is usedWoodfuel Usage Update 1 I Wood fuel use in Scotland 2011 I Hudson Consulting I September 2011 Woodfuel Demand and Usage in Scotland Report 2011 #12;Woodfuel Usage Update 2 I Wood fuel use in Scotland

  7. Woodfuel Use Update 1 I Wood fuel use in Scotland 2009 I Hudson Consulting I August 2009

    E-Print Network [OSTI]

    in the commercial, industrial and electrical energy sectors of the Scottish market) to March 2009. The informationWoodfuel Use Update 1 I Wood fuel use in Scotland 2009 I Hudson Consulting I August 2009 Woodfuel Demand and Usage in Scotland Update Report to March 2009 #12;Woodfuel Use Update 2 I Wood fuel use

  8. A comprehensive multilocus phylogeny for the wood-warblers and a revised classification of the Parulidae (Aves)

    E-Print Network [OSTI]

    Burns, Kevin J.

    Research Institute, Balboa, Panama a r t i c l e i n f o Article history: Received 2 March 2010 Revised 22 the New World warblers or wood-warblers--are a classic model radiation for studies of ecological of the genera or species in this otherwise well-studied radiation. Wood-warblers are small, primarily

  9. High Fuel Costs Spark Increased Use of Wood for Home Heating by Brian Handwerk for National Geographic News

    E-Print Network [OSTI]

    South Bohemia, University of

    's Residential Energy Consumption Survey (RECS), which provides data on how Americans heat their homes. According of the 2009 RECS show that wood is a significant source of heat in many U.S. homes, and wood consumption is almost as much as heating oil consumption," Berry said. Sometimes-Forgotten Fuel Ackerly

  10. Research, development and demonstration of lead-acid batteries for electric vehicle propulsion. Annual report, 1979. [165 Ah, 36. 5 Wh/kg

    SciTech Connect (OSTI)

    Bodamer, G.W.; Branca, G.C.; Cash, H.R.; Chrastina, J.R.; Yurick, E.M.

    1980-06-01T23:59:59.000Z

    Progress during the 1979 fiscal year is reported. All the tooling and capital equipment required for the pilot line production has been installed. A limited amount of plate production has been realized. A highly automated and versatile testing facility was established. The fabrication and testing of the initial calculated design is discussed. Cell component adjustments and the trade-offs associated with those changes are presented. Cells are being evaluated at the 3-hour rate. They have a capacity of 165 Ah and an energy density of 36.5 Wh/kg, and have completed 105 cycles to date. Experimental results being pursued under the advanced battery development program to enhance energy density and cycle life are presented. Data on the effects of different electrolyte specific gravity, separators, retainers, paste densities, battery additives and grid alloy composition on battery performance are presented and evaluated. Advanced battery prototype cells are under construction. Quality Assurance activities are summarized. They include monitoring the cell and battery fabrication and testing operations as well as all relevant documentation procedures. 12 figures, 28 tables.

  11. CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW landfill disposal

    E-Print Network [OSTI]

    Florida, University of

    CCA-Treated wood disposed in landfills and life-cycle trade-offs with waste-to-energy and MSW February 2007 Available online 9 April 2007 Abstract Chromated copper arsenate (CCA)-treated wood is a preservative treated wood construction product that grew in use in the 1970s for both residential

  12. Wood density in forests of Brazil's `arc of deforestation': Implications for biomass and flux of carbon from land-use change in Amazonia

    E-Print Network [OSTI]

    Camara, Gilberto

    Wood density in forests of Brazil's `arc of deforestation': Implications for biomass and flux of deforestation'', where most of the carbon flux from land-use change takes place. This paper presents new wood of deforestation, using locally collected species weighted by their volume in large local inventories. Mean wood

  13. Attention design: Eight issues to consider Sharon Wood *, Richard Cox, Peter Cheng

    E-Print Network [OSTI]

    Cheng, Peter

    Attention design: Eight issues to consider Sharon Wood *, Richard Cox, Peter Cheng Representation and Cognition Group, Department of Informatics, University of Sussex, Falmer, BN1 9QH, United Kingdom Available for specific applica- tions. We present eight issues relevant to this endeavour: What is attention? How can

  14. SUPPORTING GROUP APPLICATIONS VIA SATELLITE CONSTELLATIONS WITH MULTICAST L. Wood, H. Cruickshank, Z. Sun

    E-Print Network [OSTI]

    Wood, Lloyd

    SUPPORTING GROUP APPLICATIONS VIA SATELLITE CONSTELLATIONS WITH MULTICAST L. Wood, H. Cruickshank) to low-altitude low earth orbit (LEO). However, support for low-latency group applications Teledesic satellite has eight intersatellite links, in the 60GHz band, to its two nearest neighbours in each

  15. Ecological consequences of dead wood extraction in an arid Diego P. Vzquez,a,b

    E-Print Network [OSTI]

    Vazquez, Diego

    -nesting bees Introduction Extraction activities such as mining, fisheries, logging and harvesting are amongEcological consequences of dead wood extraction in an arid ecosystem1 Diego P. Vzquez,a,b * Juan A development, storing nutrients and water, providing a major source of energy and nutrients, serving

  16. Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Bilers

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Gump, C. D.; Gupta, D. P.; Chaudhari, S.

    2013-01-01T23:59:59.000Z

    Coal and wood co-fired boiler technology has improved significantly over the years. The term "co-firing", when used by members of the biomass or utility communities, has come to mean mixing a modest amount of clean, dry sawdust with coal and burning...

  17. Processes in microbial transport in the natural subsurface Timothy R. Ginn a,*, Brian D. Wood b

    E-Print Network [OSTI]

    Clement, Prabhakar

    Processes in microbial transport in the natural subsurface Timothy R. Ginn a,*, Brian D. Wood b microbial transport in the saturated subsurface. We begin with the conceptual models of the biophase of bioremediation and pathogen transport in the natural subsurface. ? 2002 Elsevier Science Ltd. All rights reserved

  18. 36.258 UE -Woods calibrates instru-ment on NASA's new solar observa-

    E-Print Network [OSTI]

    Christian, Eric

    the stored magnetic energy is converted and released into the heliosphere and geospace in the form of solar36.258 UE - Woods calibrates instru- ment on NASA's new solar observa- tory. Photosby,000 visitors. The Colorado Space Grant Consortium has outlined a concept for a University Ride Share

  19. Overview of NEMS-H2, Version 1.0 Frances Wood

    E-Print Network [OSTI]

    ConsumptionForm/Place Transformations Electricity Generation and Transmission Hydrogen Oil and Gas ProductionOverview of NEMS-H2, Version 1.0 Frances Wood OnLocation, Inc., Energy Systems Consulting (fwood markets Focus is on economic, not engineering, aspects of hydrogen production, delivery, and consumption

  20. SIDA DemoEast programme in Estonia. Supply, delivery and installation of wood pellet burning equipment

    E-Print Network [OSTI]

    by light fuel oil. The annual light oil consumption is approx. 50 tons and the maximum heat demand capacity and Kiltsi light oil fired boilers have been converted to wood pellets burning. The supplier oil fuelling) and 26NOVA (with the capacity 700 kW with light oil fuelling). The boilers are fuelled

  1. Plant traits and wood fates across the globe: rotted, burned, or consumed?

    E-Print Network [OSTI]

    German, Donovan P.

    zz *Biodiversity Research Centre, University of British Columbia, 6270 University Blvd., Vancouver, USA Abstract Wood represents the defining feature of forest systems, and often the carbon in woody turnover and its feedback to climate. Keywords: C cycle, carbon, decomposition, fire, microbial decay

  2. Brazil closes down illegal timber operation, seizes wood Rhett A. Butler, mongabay.com

    E-Print Network [OSTI]

    of Amazonas state, told Michael Astor of the Associated Press that the Norte Wood logging company in the forest reserve, but companies must file management plans to show their logging is carried out, 2006 Brazilian environmental authorities closed down an illegal logging operation in the Amazon

  3. Exploring Age-Related Environmental Attitudes in the Context of Wood Product Certification

    E-Print Network [OSTI]

    Wu, Qinglin

    environmental standards, which companies could follow in the growing and harvesting of timber. Those that follow including environmental organizations, retailers and wood product companies are interested in developing'. Companies that certify their products encourage environmentally minded consumers to buy their products over

  4. SHRINK-FITTING AND DOWEL WELDING IN MORTISE AND TENON STRUCTURAL WOOD JOINTS

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    SHRINK-FITTING AND DOWEL WELDING IN MORTISE AND TENON STRUCTURAL WOOD JOINTS E.Mougel1 , C.Segovia1 welded dowels. Increasing the number of welded dowels, however, produced joints of higher strength than those bonded just by shrink-fitting. Combining in the same joint both dowel welding and shrink

  5. Volatilit du dpt actif du thorium Par T. BARRATT et A. B. WOOD

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    198 Volatilit du dpt actif du thorium Par T. BARRATT et A. B. WOOD [Woolwich Polytechnic]. Marsden et Darwini avaient propos pour la srie de transformations du thorium A le schma suivant, Cet et thoriums C faites par Mlle Meitner 2 et Marsden et Wilson3ayant donn des rsultats contradictoires, les

  6. Science Highlight June 2011 Chromium forms in coal and wood and their converted forms in

    E-Print Network [OSTI]

    Wechsler, Risa H.

    as a component in fly-ash, the major waste product from coal combustion. Disposal practices for coal-derived fly-ash Science Highlight June 2011 Chromium forms in coal and wood and their converted forms in fly-ash(VI) in Coal-Derived Fly-Ash The two common chromium oxidation states, Cr(III) and Cr(VI), differ greatly

  7. National Woodfuels and Wood Energy Information Analysis Prepared by: Sok Bun Heng

    E-Print Network [OSTI]

    and electricity. However, whilst a higher consumption of LPG has been used to complement wood fuels. Such energy. The per capita energy consumption is lower compared to developed countries, but high consumption for income generation. II)- Energy Consumption There is no proper study or database about energy consumption

  8. Woodfuel community heating at Kielder A wood-fired district heating

    E-Print Network [OSTI]

    Woodfuel community heating at Kielder A wood-fired district heating system, one of the first of its kind in Britain, provides a low- carbon source of heating to the Kielder village community Kielder-fired district heating system was installed in 2004 as a practical low-carbon solution to providing heat and hot

  9. Continuous On-Line Measurement of Lignin Concentration in Wood Pulp

    E-Print Network [OSTI]

    Jeffers, L. A.; Roman, G. W.

    spanning the range of Kappa numbers from approximately 15 to 55. The range of Kappa numbers was achieved by removing samples from the digester at different times so that within a set. each of the samples came from the same parent wood-chip stock...

  10. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOE Patents [OSTI]

    Moens, Luc (Lakewood, CO)

    1995-01-01T23:59:59.000Z

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350.degree. and 375.degree. C. to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan.

  11. Isolation of levoglucosan from lignocellulosic pyrolysis oil derived from wood or waste newsprint

    DOE Patents [OSTI]

    Moens, L.

    1995-07-11T23:59:59.000Z

    A method is provided for preparing high purity levoglucosan from lignocellulosic pyrolysis oils derived from wood or waste newsprint. The method includes reducing wood or newsprint to fine particle sizes, treating the particles with a hot mineral acid for a predetermined period of time, and filtering off and drying resulting solid wood or newsprint material; pyrolyzing the dried solid wood or newsprint material at temperatures between about 350 and 375 C to produce pyrolysis oils; treating the oils to liquid-liquid extraction with methyl isobutyl ketone to remove heavy tar materials from the oils, and to provide an aqueous fraction mixture of the oils containing primarily levoglucosan; treating the aqueous fraction mixtures with a basic metal salt in an amount sufficient to elevate pH values to a range of about 12 to about 12.5 and adding an amount of the salt in excess of the amount needed to obtain the pH range to remove colored materials of impurities from the oil and form a slurry, and freeze-drying the resulting slurry to produce a dry solid residue; and extracting the levoglucosan from the residue using ethyl acetate solvent to produce a purified crystalline levoglucosan. 2 figs.

  12. On the computational power of photosynthesis Niall Murphy, Damien Woods and Thomas J. Naughton

    E-Print Network [OSTI]

    Murphy, Niall

    On the computational power of photosynthesis Niall Murphy, Damien Woods and Thomas J. Naughton County Kildare, Ireland #12;Abstract We describe a simplified explanation of photosynthesis. We charac- terise the complexity of photosynthesis by interpreting its chemical equa- tion as a language acceptance

  13. Potential of distributed wood-based biopower systems serving basic electricity needs in rural Uganda

    E-Print Network [OSTI]

    Vermont, University of

    October 2009 Revised 8 January 2010 Accepted 9 January 2010 Keywords: Rural electrification Gasification supply. Although virtually non-existent, rural electrification is receiving very little attentionPotential of distributed wood-based biopower systems serving basic electricity needs in rural

  14. Development of a Software System to Facilitate Implementation of Coal and Wood Co-Fired Bilers

    E-Print Network [OSTI]

    Gopalakrishnan, B.; Gump, C. D.; Gupta, D. P.; Chaudhari, S.

    2013-01-01T23:59:59.000Z

    Coal and wood co-fired boiler technology has improved significantly over the years. The term "co-firing", when used by members of the biomass or utility communities, has come to mean mixing a modest amount of clean, dry sawdust with coal and burning...

  15. Ciguatera in the Eastern Caribbean DAVID A. OLSEN, DAVID W. NELLIS, and RICHARD S. WOOD

    E-Print Network [OSTI]

    Ciguatera in the Eastern Caribbean DAVID A. OLSEN, DAVID W. NELLIS, and RICHARD S. WOOD a feature of human use of Caribbean marine resources since pre-Columbian times (Price, 1966). Resource use patterns by the Carib and Arawak Indians who inhab- ited the eastern Caribbean would indi- cate that they

  16. Damage and Damage Prediction for Wood Shearwalls Subjected to Simulated Earthquake Loads

    E-Print Network [OSTI]

    Gupta, Rakesh

    Damage and Damage Prediction for Wood Shearwalls Subjected to Simulated Earthquake Loads John W damaged resulting in large financial losses. Societal demands for damage-limiting design philosophies and better predict damage to woodframe structures. This paper examines damage to the lateral load carrying

  17. Genetic variation of hydraulic and wood anatomical traits in hybrid poplar and trembling aspen

    E-Print Network [OSTI]

    Hacke, Uwe

    Genetic variation of hydraulic and wood anatomical traits in hybrid poplar and trembling aspen November 2010 New Phytologist (2011) 190: 150160 doi: 10.1111/j.1469-8137.2010.03594.x Key words: aspen forestry systems and breeding programs often include either native aspen or hybrid poplar clones

  18. WOOD RESOURCE John R. Jones, Norbert V. DeByle, and Robert P. Winokur

    E-Print Network [OSTI]

    WOOD RESOURCE John R. Jones, Norbert V. DeByle, and Robert P. Winokur Aspen has not been cut, the aspen harvest from National Forests in four Forest Service regions in the Rocky Mountain area was 7 aspen forests. The net bole volume of aspen growing stock2 in the in- terior West was nearly 4

  19. In situ 3D characterization of historical coatings and wood using multimodal nonlinear optical

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    In situ 3D characterization of historical coatings and wood using multimodal nonlinear optical optical imaging of historical artifacts by combining Second Harmonic Generation (SHG) and Two commonly encountered in coatings of cultural heritage artifacts by analyzing one- and multi-layered model

  20. Slovak Centre of Biomass Use for Energy Wood Fired Heating Plant in Slovakia

    E-Print Network [OSTI]

    authorities CHP Planning issues Transport companies District Heating Sustainable communities Utilities Solar the object of interest of municipalities and management of companies, is the issue of how to reconstruct out processing companies are represented in the region. Forest sector produces about 1.5 million m3 of wood

  1. Use of handheld X-ray fluorescence spectrometry units for identification of arsenic in treated wood

    E-Print Network [OSTI]

    Florida, University of

    ; accepted 19 November 2006 Handheld XRF analyzers provided quantitative results for the amount of arsenic of handheld XRF analyzers on wood that has been treated with a preservative containing arsenic. Experiments of the XRF ar- senic readings. Results showed that the precision of the XRF improved with increased sample

  2. alternative is rock or other noncombustible material; avoid bark or wood chip mulch in

    E-Print Network [OSTI]

    alternative is rock or other noncombustible material; avoid bark or wood chip mulch in this area. 6 needles and leaves to eliminate an ignition source for firebrands, especially during the hot, dry weather escape drill. Know where safety areas are within your subdivision. Meadows, rock outcrops, and wide roads

  3. Wood Supply Chain Optimisation 2010Forest to Market Innovations to Improve Logistics & Operations

    E-Print Network [OSTI]

    Wood Supply Chain Optimisation 2010Forest to Market Innovations to Improve Logistics & Operations INTERNATIONALTRENDS IN LOGISTICS AND SUPPLY CHAIN MANAGEMENT 9.30am Managing Supply Chain Emissions to Gain and GPS tracking to Improve transport logistics. A case study on HVP Plantations implementation of a new

  4. Effect of CO2 on wood properties of Liquidambar styraciflua after

    E-Print Network [OSTI]

    Gray, Matthew

    1/18/2010 1 Effect of CO2 on wood properties of Liquidambar styraciflua after 10 years-Knoxville face.ornl.gov IntroductionIntroductionIntroductionIntroduction FACEFACEFACEFACE The free air CO2 enrichment experiment on the Oak Ridge National Environmental Research Park The effect of CO2 enrichment

  5. Stem wood properties of Populus tremuloides, Betula papyrifera and Acer saccharum saplings after 3 years of

    E-Print Network [OSTI]

    years of treatments to elevated carbon dioxide and ozone S E I J A K A A K I N E N *1 , K AT R I K O the Earth's surface (IPCC, 2001). Carbon dioxide (CO2) is the dominant human-influenced greenhouse gasStem wood properties of Populus tremuloides, Betula papyrifera and Acer saccharum saplings after 3

  6. National Woodfuels and Wood Energy Information Analysis Prepared by: Muhammad Iqbal Sial PhD

    E-Print Network [OSTI]

    .5. Black liquor 2 2. TRENDS IN CONSUMPTION 2 2.1. Consumption by geographical location 3 2.2. Consumption. Province/territory wise distribution of wild lands. 13 10. National energy consumption by source. 20 112nd Draft Desk Study on National Woodfuels and Wood Energy Information Analysis PAKISTAN Prepared

  7. POLYPROPYLENE COMPOSITES FILLED WITH STEAM-EXPLODED WOOD FIBERS FROM BEETLE-KILLED LOBLOLLY PINE

    E-Print Network [OSTI]

    Wang, Siqun

    POLYPROPYLENE COMPOSITES FILLED WITH STEAM-EXPLODED WOOD FIBERS FROM BEETLE-KILLED LOBLOLLY PINE of Tennessee Knoxville, TN 37996 (Received October 2005) ABSTRACT Beetle-killed loblolly pine chips were steam. Keywords: Beetle-killed pine, steam explosion, polypropylene composite, compatibilizer, flexural prop

  8. Abundance, Distribution and Estimated Consumption (kg fish) of Piscivorous Birds Along the Yakima River, Washington State; Implications for Fisheries Management, 2002 Annual Report.

    SciTech Connect (OSTI)

    Major, III, Walter; Grassley, James M.; Ryding, Kristen E. (University of Washington, Quantitive Ecology Program, Seattle, WA)

    2003-05-01T23:59:59.000Z

    This report is divided into two chapters. The abstract for chapter one is--Understanding of the abundance and spatial and temporal distributions of piscivorous birds and their potential consumption of fish is an increasingly important aspect of fisheries management. During 1999-2002, we determined the abundance and distribution and estimated the maximum consumption (kg biomass) of fish-eating birds along the length of the Yakima River in Washington State. Sixteen different species were observed during the 4-yr study, but only half of those were observed during all years. Abundance and estimated consumption of fish within the upper and middle sections of the river were dominated by common mergansers (Mergus merganser) which are known to breed in those reaches. Common mergansers accounted for 78 to 94% of the estimated total fish take for the upper river or approximately 28,383 {+-} 1,041 kg over the 4 yrs. A greater diversity of avian piscivores occurred in the lower river and potential impacts to fish populations was more evenly distributed among the species. In 1999-2000, great blue herons potentially accounted for 29 and 36% of the fish consumed, whereas in 2001-2002 American white pelicans accounted for 53 and 55%. We estimated that approximately 75,878 {+-} 6,616 kg of fish were consumed by piscivorous birds in the lower sections of the river during the study. Bird assemblages differed spatially along the river with a greater abundance of colonial nesting species within the lower sections of the river, especially during spring and the nesting season. The abundance of avian piscivores and consumption estimates are discussed within the context of salmonid supplementation efforts on the river and juvenile out-migration. The abstract for chapter two is--Consumption of fish by piscivorous birds may be a significant constraint on efforts to enhance salmonid populations within tributaries to the Columbia River in Washington State. During 1999-2002, we determined the abundance of fish-eating birds, primarily ring-billed (Larus delawarensis) and California (L. californicus) gulls and monitored their behavior at two man-made structures within the Yakima River in eastern Washington: Horn Rapids Dam, a low-head irrigation dam, and the return pipe for the Chandler Juvenile Fish Handling Facility. Earlier observations of congregations of gulls at these structures suggested an increased likelihood of predation of out-migrating juvenile salmonids. We estimated the number of fish consumed and examined the relationship between river flow and gull numbers and fish taken. Numbers of gulls at the structures varied daily between their arrival in Late March-early April and departure in late June (mean ({+-}SE) - Horn Rapids: 11.7 ({+-}2.0), Chandler: 20.1 ({+-}1.5) ). During the 4-yr study, numbers at Horn Rapids peaked dramatically during the last 2 weeks in May (between 132.9 ({+-}4.2) to 36.6 ({+-}2.2) gulls/day) and appeared to the associated with the release of > 1-mil hatchery juvenile fall chinook (Oncorhynchus tshawytscha) above the 2 study sites. A comparable peak in gull abundance was not observed at Chandler. Diurnal patterns of gull abundance also varied among years and sites. The relationship between foraging efficiency and gull numbers was not consistent among years or sites. Gull numbers were not correlated with river flow when year was considered. However, variations in flow among years appeared to be associated with average gull numbers at each site, but trends were not consistent between sites. Low seasonal flows were associated with increased predation at Chandler, whereas high seasonal flows were associated with increased predation at Horn Rapids. Assuming all fish taken were salmonids, we estimate gulls consumed between 0.1-10.3 % of the juvenile salmonids passing or being released from the Chandler Juvenile Fish Monitoring Facility located above the two structures. Staggered releases of hatchery fish, nocturnal releases of fish entrained in the Chandler facility, changes in the orientation of the outflow from the f

  9. Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees

    DOE Patents [OSTI]

    Meglen, Robert R. (Boulder, CO); Kelley, Stephen S. (Evergreen, CO)

    2003-01-01T23:59:59.000Z

    In a method for determining the dry mechanical strength for a green wood, the improvement comprising: (a) illuminating a surface of the wood to be determined with a reduced range of wavelengths in the VIS-NIR spectra 400 to 1150 nm, said wood having a green moisture content; (b) analyzing the surface of the wood using a spectrometric method, the method generating a first spectral data of a reduced range of wavelengths in VIS-NIR spectra; and (c) using a multivariate analysis technique to predict the mechanical strength of green wood when dry by comparing the first spectral data with a calibration model, the calibration model comprising a second spectrometric method of spectral data of a reduced range of wavelengths in VIS-NIR spectra obtained from a reference wood having a green moisture content, the second spectral being correlated with a known mechanical strength analytical result obtained from the reference wood when dried and a having a dry moisture content.

  10. PTG 2010PTG 2010 i i 33 P blP bl 55PTG 2010PTG 2010 vningvning 33 ProblemProblem 55 2 kg of steam at a pressure of 1 bar are contained in a

    E-Print Network [OSTI]

    Zevenhoven, Ron

    PTG 2010PTG 2010 i i 33 P blP bl 55PTG 2010PTG 2010 vningvning 33 ProblemProblem 55 2 kg the internal pressure reaches 10 kPa, the tank walls will collapsewill collapse. a) Sketch a p-v diagram University - TkF Heat Engineering - 20500 Turku Finland 1 2 P blP bl 55ProblemProblem 55 Givet: ( )2 2 kg

  11. Dear colleagues, With the first newsletter "Tackle Climate Change: Use Wood" I intended to inform you on the

    E-Print Network [OSTI]

    on January 10th 2007 . Global warming and climate change should to be dealt are pioneers in the field of energy and electricity generation based on biomass. The use of wood both

  12. Understanding wood-pool dynamics using long-term monitoring data from the Gualala River Watershed: What can we learn?

    E-Print Network [OSTI]

    Church, Tamara

    2012-01-01T23:59:59.000Z

    of riparian and stream restoration in the western UnitedA. Grant. 2010. Do in-stream restoration structures enhanceuse of large wood in stream restoration: experiences from 50

  13. Wood-Producing Sunflower? Mining Genetic Diversity in Desert-Dwelling Wild Species (2010 JGI User Meeting)

    ScienceCinema (OSTI)

    Knapp, Steve

    2011-04-26T23:59:59.000Z

    Steve Knapp from Monsanto on "Wood-Producing Sunflower? Mining Genetic Diversity in Desert-Dwelling Wild Species" on March 25, 2010 at the 5th Annual DOE JGI User Meeting

  14. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into Sugar Cane versus Wood Fiber Paper

    E-Print Network [OSTI]

    and benefits. If true, then risk of serious respiratory illness caused by working with bagasse should Fig. 2: Composition comparison between bagasse and wood fibre paper (Pulp and Paper Resources the inhaled air. Bagasse A

  15. Dover Textiles - A Case History on Retrofitting Factories with a Boiler System Fueled on Coal, Wood and Waste

    E-Print Network [OSTI]

    Pincelli, R. D.

    1981-01-01T23:59:59.000Z

    a coal, wood, and waste fired boiler system to serve two plants. This case history will document payback periods of less than three years; return on investments of 20% plus; benefits of North Carolina and federal investment tax credits; EPA...

  16. Cloning, characterization, and expression of glucose transporter 2 in the freeze-tolerant wood frog, Rana sylvatica

    E-Print Network [OSTI]

    Lee Jr., Richard E.

    Cloning, characterization, and expression of glucose transporter 2 in the freeze-tolerant wood frog. sylvatica suggests that these transporters contribute importantly to freezing survival. General significance Available online 21 December 2013 Keywords: Anuran Cryoprotectant Ecogeography freeze tolerance Glucose

  17. Comminution process to produce engineered wood particles of uniform size and shape with disrupted grain structure from veneer

    DOE Patents [OSTI]

    Dooley, James H; Lanning, David N

    2013-07-30T23:59:59.000Z

    Comminution process of wood veneer to produce wood particles, by feeding wood veneer in a direction of travel substantially normal to grain through a counter rotating pair of intermeshing arrays of cutting discs arrayed axially perpendicular to the direction of veneer travel, wherein the cutting discs have a uniform thickness (Td), to produce wood particles characterized by a length dimension (L) substantially equal to the Td and aligned substantially parallel to grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) substantially equal to the veneer thickness (Tv) and aligned normal to W and L, wherein the W.times.H dimensions define a pair of substantially parallel end surfaces with end checking between crosscut fibers.

  18. Factors affecting the availability of wood energy from nonindustrial private forest lands in the Northeast. Forest Service Resource Bulletin (Final)

    SciTech Connect (OSTI)

    Lindsay, J.J.; Gilbert, A.H.; Birch, T.W.

    1992-05-01T23:59:59.000Z

    The report describes the factors that affect the availability of fuelwood from NIPF lands in the Northeastern United States (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, Vermont, Maryland, New Jersey, New York, and Pennsylvania). It is part of a comprehensive wood-for-energy study entitled 'The Production, Consumption, and Marketing of Wood for Energy in the Northeast (Northeast Regional Study 142).'' The study is designed to: (1) Estimate the demand for wood energy in the Northeast by consuming sectors, state, and region; (2) Analyze the managment and supply of wood for energy processing as well as marketing structures; (3) Identify goals and effectiveness of actual and alternative local, state, and Federal forest policies and contrast these with the objectives of forest owners with regard to the use of wood for energy. The objective of the study is to analyze the supply of wood energy, that is, to identify and describe the factors that influence NIPF owners to harvest, or permit the harvest, of fuelwood from their land.

  19. Baseline effects on carbon footprints of biofuels: The case of wood

    SciTech Connect (OSTI)

    Johnson, Eric, E-mail: johnsonatlantic@gmail.com [Atlantic Consulting, 8136 Gattikon (Switzerland); Tschudi, Daniel [ETH, Berghaldenstrasse 46, 8800 Thalwil (Switzerland)

    2012-11-15T23:59:59.000Z

    As biofuel usage has boomed over the past decade, so has research and regulatory interest in its carbon accounting. This paper examines one aspect of that carbon accounting: the baseline, i.e. the reference case against which other conditions or changes can be compared. A literature search and analysis identified four baseline types: no baseline; reference point; marginal fossil fuel; and biomass opportunity cost. The fourth one, biomass opportunity cost, is defined in more detail, because this is not done elsewhere in the literature. The four baselines are then applied to the carbon footprint of a wood-fired power plant. The footprint of the resulting wood-fired electricity varies dramatically, according to the type of baseline. Baseline type is also found to be the footprint's most significant sensitivity. Other significant sensitivities are: efficiency of the power plant; the growth (or re-growth) rate of the forest that supplies the wood; and the residue fraction of the wood. Length of the policy horizon is also an important factor in determining the footprint. The paper concludes that because of their significance and variability, baseline choices should be made very explicit in biofuel carbon footprints. - Highlights: Black-Right-Pointing-Pointer Four baseline types for biofuel footprinting are identified. Black-Right-Pointing-Pointer One type, 'biomass opportunity cost', is defined mathematically and graphically. Black-Right-Pointing-Pointer Choice of baseline can dramatically affect the footprint result. Black-Right-Pointing-Pointer The 'no baseline' approach is not acceptable. Black-Right-Pointing-Pointer Choice between the other three baselines depends on the question being addressed.

  20. On-line measurement of lignin in wood pulp by color shift of fluorescence

    DOE Patents [OSTI]

    Jeffers, L.A.; Malito, M.L.

    1996-01-23T23:59:59.000Z

    Lignin concentrations from wood pulp samples are measured by applying an excitation light at a selected wavelength to the samples in order to cause the lignin to emit fluorescence. A spectral distribution of the fluorescence emission is then determined. The lignin concentration is then calculated based on the spectral distribution signal. The spectral distribution is quantified by either a wavelength centroid method or a band ratio method. 6 figs.

  1. On-line measurement of lignin in wood pulp by color shift of fluorescence

    DOE Patents [OSTI]

    Jeffers, Larry A. (Washington Township, Stark County, OH); Malito, Michael L. (Liberty Township, Trumbull County, OH)

    1996-01-01T23:59:59.000Z

    Lignin concentrations from wood pulp samples are measured by applying an excitation light at a selected wavelength to the samples in order to cause the lignin to emit fluorescence. A spectral distribution of the fluorescence emission is then determined. The lignin concentration is then calculated based on the spectral distribution signal. The spectral distribution is quantified by either a wavelength centroid method or a band ratio method.

  2. Depositional environments of Wood Siding Formation and Onaga Shale (Pennsylvanian-Permian), northeast Kansas

    SciTech Connect (OSTI)

    Bisby, C.G.

    1987-05-01T23:59:59.000Z

    The eastern Kansas sedimentary deposits of the Wood Siding Formation and the Onaga Shale are recognized as products of Late Pennsylvanian-Early Permian cyclic sedimentation. Reconstruction of depositional events associated with the units is important in understanding cyclic sedimentation in the Mid-Continent. In Kansas, the Wood Siding Formation-Onaga Shale outcrop belt trends nearly parallel to the Nemaha anticline in an approximately northeast-southwest direction. Detailed field studies of 26 stratigraphic sections (nine measured and described in detail) in the northeastern part of this belt provide the basis for interpretation of the depositional environments of the two formations. Results of this study indicate that variations in water depth/distance from shore, controlled by late Paleozoic structural features and eustatic sea level changes, were the major factors controlling sedimentation. On the basis of lithologic and paleontologic characteristics, four fifth-order transgressive-regressive (T-R) units, with periodicities of 300,000 to 500,000 years, have been identified within the Wood Siding Formation and the Onaga Shale. At least five sixth-order T-R units, with periodicities of 50,000 to 130,000 years or less, have also been identified within the two formations. The boundaries between sixth-order T-R units are represented by thin, laterally persistent marine units or by climate change surfaces. Paleogeographic reconstructions, based on the correlation of sixth-order T-R units, provide strong evidence for a northeast-southwest-trending shoreline during Wood Siding-Onaga time. The most marine sedimentary rocks are in the southern part of the study area and contain a diverse marine fossil assemblage. Channel facies with pyritized and coalified plant fossils are more common in the northern part of the outcrop belt and suggest marshy to swampy depositional conditions.

  3. Process Optimization Assessments at Fort Leonard Wood, Missouri and Fort Carson, Colorado

    E-Print Network [OSTI]

    Lin, M.; Vavrin, J.; Smith, W.

    2004-01-01T23:59:59.000Z

    Process Optimization Assessments at Fort Leonard Wood, Missouri and Fort Carson, Colorado Mike C.J. Lin U.S. Army Corps of Engineers Engineer Research Development Center, Construction Engineering Research Laboratory Champaign, Illinois... a specific Level II scope of work, respective roles, and the most expeditious path forward. This begins with a formal review of this report, combined with a planning session to organize the Level II program. REFERENCES 1. Lin, Mike C.J., et...

  4. Effects of Framing on the Thermal Performance of Wood and Steel-Framed Walls

    E-Print Network [OSTI]

    Kosny, J.; Yarbrough, D. W.; Childs, P.; Mohiuddin, S. A.

    2006-01-01T23:59:59.000Z

    , the consequences of installation imperfections in cavity insulation on thermal performance are analyzed. The results of the study demonstrated significant sensitivity in some configurations of residential walls to the framing factor and insulation installation... imperfections. Keywords R-value, Framing Factor, Cavity Insulation, Framing Effect Coefficient, Steel Frame walls, Wood-frame walls TERMINOLOGY OF THE WHOLE WALL R-VALUE PROCEDURE USED IN THIS PAPER The following list of thermal performance...

  5. Gene Expression Analyses and Association Studies of Wood Development Genes in Loblolly Pine (Pinus taeda L.)

    E-Print Network [OSTI]

    Palle, Sreenath Reddy

    2011-10-21T23:59:59.000Z

    ............................................................ 58 7 Model of the association between the AIP and PRT genes ........................ 64 8 Pathways demonstrating the indirect role of CGS and the direct role of CAD in lignin biosynthesis... complex and therefore the molecular mechanisms governing the differentiation of wood tissues are complicated. Several researchers have identified a number of genes involved in the biosynthesis of polysaccharides, lignins and cell wall proteins in forest...

  6. Bioremediation: a study of genotoxicity of soil and groundwater from a former wood treatment facility

    E-Print Network [OSTI]

    Gomez, Cristi Lea Rysc

    2002-01-01T23:59:59.000Z

    , 2001). PAHs are commonly found in wood treatment and petroleum waste. The goal of bioremediation is to completely mineralize hazardous constituents into carbon dioxide, water, and other less toxic compounds by way of microbial degradation...). Bioventing aerates contaminated soils by forcing oxygen into the unsaturated soil. The addition of oxygen stimulates aerobic degradation. Other in situ treatments include biosparging, phytoremediation, and slurry-phase lagoon aeration. The USEPA lists...

  7. Building Profits and Goodwill in the Wood Product Industry with Time-Of-Use Rates

    E-Print Network [OSTI]

    Boyd, W. K.

    utilities across the U.S. are searching for alternatives to building generating plants. One of the alternatives used by Carolina Power & Light Company is Time-of-Use Rates. These rates give monetary incentives to customers who change their electrical... nationally known wood pro ducts manufacturer with a 235-employee plywood plant located in Moncure, North Carolina. The plant receives electric ser vice from Carolina Power & Light Company (CP&L), an investor-owned electric utility serving over 825...

  8. Metagenomic and functional analysis of hindgut microbiota of a wood-feeding higher termite

    SciTech Connect (OSTI)

    Warnecke, Falk; Warnecke, Falk; Luginbuhl, Peter; Ivanova, Natalia; Ghassemian, Majid; Richardson, Toby H.; Stege, Justin T.; Cayouette, Michelle; McHardy, Alice C.; Djordjevic, Gordana; Aboushadi, Nahla; Sorek, Rotem; Tringe, Susannah G.; Podar, Mircea; Martin, Hector Garcia; Kunin, Victor; Dalevi, Daniel; Madejska, Julita; Kirton, Edward; Platt, Darren; Szeto, Ernest; Salamov, Asaf; Barry, Kerrie; Mikhailova, Natalia; Kyrpides, Nikos C.; Matson, Eric G.; Ottesen, Elizabeth A.; Zhang, Xinning; Hernandez, Myriam; Murillo, Catalina; Acosta, Luis G.; Rigoutsos, Isidore; Tamayo, Giselle; Green, Brian D.; Chang, Cathy; Rubin, Edward M.; Mathur, Eric J.; Robertson, Dan E.; Hugenholtz, Philip; Leadbetter, Jared R.

    2007-10-01T23:59:59.000Z

    From the standpoints of both basic research and biotechnology, there is considerable interest in reaching a clearer understanding of the diversity of biological mechanisms employed during lignocellulose degradation. Globally, termites are an extremely successful group of wood-degrading organisms and are therefore important both for their roles in carbon turnover in the environment and as potential sources of biochemical catalysts for efforts aimed at converting wood into biofuels. Only recently have data supported any direct role for the symbiotic bacteria in the gut of the termite in cellulose and xylan hydrolysis. Here we use a metagenomic analysis of the bacterial community resident in the hindgut paunch of a wood-feeding Nasutitermes species to show the presence of a large, diverse set of bacterial genes for cellulose and xylan hydrolysis. Many of these genes were expressed in vivo or had cellulase activity in vitro, and further analyses implicate spirochete and fibrobacter species in gut lignocellulose degradation. New insights into other important symbiotic functions including H{sub 2} metabolism, CO{sub 2}-reductive acetogenesis and N{sub 2} fixation are also provided by this first system-wide gene analysis of a microbial community specialized towards plant lignocellulose degradation. Our results underscore how complex even a 1-{micro}l environment can be.

  9. Low VOC drying of lumber and wood panel products. Progress report number 9

    SciTech Connect (OSTI)

    Hooda, U.; Banerjee, S. [Inst. of Paper Science and Technology, Atlanta, GA (United States); Ingram, L.; Conners, T. [Mississippi State Univ., MS (United States)

    1998-10-01T23:59:59.000Z

    This project is based on the finding that brief microwave or RF-treatment of wood under low-headspace conditions leads to the release of VOCs. On occasion the authors have found that prolonged irradiation increases turpentine yield much more than anticipated from a simple mass balance; i.e., more pinene appeared to be released than was present in the wood in the first place. If taken at face value, this suggests that brief low-headspace irradiation removes VOCs, while prolonged exposure creates it. While seemingly improbable, this could follow if dielectric heating exposed regions of wood that were otherwise inaccessible to the solvent used for extraction (unlikely), or if the irradiation induced depolymerization of terpene dimers or higher polymers. In this report the authors attempt to identify the conditions that lead to this apparent enhancement of terpene yield, by constructing relationships between yield and irradiation parameters. The tentative conclusions are that this enhancement only occurs with relatively wet heartwood, and only under prolonged irradiation. An additional conclusion is that continuing analyses of twelve trees in the MSU forest confirm that the absence of a significant seasonal influence on turpentine content. An apparatus for permeability testing has been constructed, and work is underway.

  10. Ionic liquid pretreatment of poplar wood at room temperature: swelling and incorporation of nanoparticles

    SciTech Connect (OSTI)

    Lucas, Marcel [Los Alamos National Laboratory; Macdonald, Brian A [Los Alamos National Laboratory; Wagner, Gregory L [Los Alamos National Laboratory; Joyce, Steven A [Los Alamos National Laboratory; Rector, Kirk D [Los Alamos National Laboratory

    2010-01-01T23:59:59.000Z

    Lignocellulosic biomass represents a potentially sustainable source of liquid fuels and commodity chemicals. It could satisfy the energy needs for transportation and electricity generation, while contributing substantially to carbon sequestration and limiting the accumulation of greenhouse gases in the atmosphere. Potential feedstocks are abundant and include crops, agricultural wastes, forest products, grasses, and algae. Among those feedstocks, wood is mainly constituted of three components: cellulose, hemicellulose, and lignin. The conversion process of lignocellulosic biomass typically consists of three steps: (1) pretreatment; (2) hydrolysis of cellulose and hemicellulose into fermentable sugars; and (3) fermentation of the sugars into liquid fuels (ethanol) and other commodity chemicals. The pretreatment step is necessary due to the complex structure of the plant cell wall and the chemical resistance of lignin. Most current pretreatments are energy-intensive and/or polluting. So it is imperative to develop new pretreatments that are economically viable and environmentally friendly. Recently, ionic liquids have attracted considerable interest, due to their ability to dissolve biopolymers, such as cellulose, lignin, native switchgrass, and others. Ionic liquids are also considered green solvents, since they have been successfully recycled at high yields for further use with limited efficiency loss. Also, a few microbial cellulases remain active at high ionic liquid concentration. However, all studies on the dissolution of wood in ionic liquids have been conducted so far at high temperatures, typically above 90 C. Development of alternative pretreatments at room temperature is desirable to eliminate the additional energy cost. In this study, thin sections of poplar wood were swollen at room temperature by a 3 h ionic liquid (1-ethyl-3-methylimidazolium acetate or EMIMAc) pretreatment. The pretreated sample was then exposed to an aqueous suspension of nanoparticles that resulted in the sample contraction and the deposition of nanoparticles onto the surface and embedded into the cell wall. To date, both silver and gold particles ranging in size from 40-100 nm have been incorporated into wood. Penetration of gold nanoparticles of 100 nm diameter in the cell walls was best confirmed by near-infrared confocal Raman microscopy, since the deposition of gold nanoparticles induces a significant enhancement of the Raman signal from the wood in their close proximity, an enhancement attributed to the surface-enhanced Raman effect (SERS). After rinsing with water, scanning electron microscopy (SEM) and Raman images of the same areas show that most nanoparticles remained on the pretreated sample. Raman images at different depths reveal that a significant number of nanoparticles were incorporated into the wood sample, at depths up to 4 {micro}m, or 40 times the diameter of the nanoparticles. Control experiments on an untreated wood sample resulted in the deposition of nanoparticles only at the surface and most nanoparticles were removed upon rinsing. This particle incorporation process enables the development of new pretreatments, since the nanoparticles have a high surface-to-volume ratio and could be chemically functionalized. Other potential applications for the incorporated nanoparticles include isotope tracing, catalysis, imaging agents, drug-delivery systems, energy-storage devices, and chemical sensors.

  11. by the ratio of biogas production to organic matter input : 0.20 to 0.3 M3/kg organic When considering the period of steady operation, i.e. without technical problems such

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    by the ratio of biogas production to organic matter input : 0.20 to 0.3 M3/kg organic matter. When of digestible amino acids. The definition of availability is recalled and the methods used to estimate it briefly examined ; that based on measurements of the apparent digestibility being apparently the most

  12. PROSPECTS FOR CO-FIRING OF CLEAN COAL AND CREOSOTE-TREATED WASTE WOOD AT SMALL-SCALE POWER STATIONS

    E-Print Network [OSTI]

    Janis Zandersons; Aivars Zhurinsh; Edward Someus

    If a small-scale clean coal fu eled power plant is co-fu eled with 5 % of cre o-sote-treated used-up sleeper wood, the de con tam i na tion by carbonisation at 500 C in an in di rectly heated ro tary kiln with the di am e ter 1.7 m and ef fec-tive length 10 m can be real ised. It should be in cluded in the 3R Clean Coal Carbonisation Plant sys tem, which pro cesses coal. It will im prove the heat bal ance of the sys tem, since the carbonisation of wood will de liver a lot of high caloricity pyroligneous vapour to the joint fur nace of the 3R Clean Coal Carbonisation Plant. Pine wood sleeper sap wood con tains 0.25 % of sul phur, but the av er age pine sleeper wood (sap wood and heart wood) 0.05% of sul phur. Most of the sul phur is lost with the pyroligneous vapour and burned in the fur nace. Since the 3R Clean Coal Carbonisation Plant is equipped with a flue gases clean ing sys tem, the SO2 emis sion level will not ex-ceed 5 mg/m 3. The char coal of the sap wood por tion of sleep ers and that of the av er age sleeper wood will con tain 0.22 % and 0.035 % of sul phur, re spec-tively. The in crease of the carbonisation tem per a ture does not sub stan tially de crease the sul phur con tent in char coal, al though it is suf fi ciently low, and the char coal can be co-fired with clean coal. The con sid ered pro cess is suit-able for small power plants, if the bio mass in put in the com mon en ergy bal-ance is 5 to 10%. If the mean dis tance of sleep ers trans por ta tion for Cen tral and East ern Eu-rope is es ti mated not to ex ceed 200 km, the co-com bus tion of clean coal and carbonised sleep ers would be an ac cept able op tion from the en vi ron men tal and eco nomic points of view.

  13. Bedrock erosion in the lower Big Wood River channel, southcentral Idaho

    SciTech Connect (OSTI)

    Maley, T.S.; Oberlindacher, P. (Bureau of Land Management, Boise, ID (United States))

    1993-04-01T23:59:59.000Z

    The Big Wood River, which is fed from the mountains to the north of the Snake River Plain, cuts through 0.8 m.y. old basalt in an area north and east of Shoshone, Idaho. The basalt channel carved by the Big Wood River exhibits remarkable and unusual bedrock erosional features. Approximately 10,000 years ago, nearby Black Butte shield volcano erupted basaltic lave which rerouted the Big Wood River. At the time the new river channel formed 10,000 years ago, alpine glaciers in the mountains were also beginning to melt. High flows of water from the melting glaciers during the next few thousand years carried large sediment loads and were instrumental in developing the spectacular potholes now found in the channel. Most of the scouring agents are pebbles and cobbles derived from quartzite, granitic, and gneissic rocks. As potholes began to develop, they were closely spaced and generally less than 1 m apart. However, as the potholes enlarged and expanded both horizontally and vertically, they coalesced with one another. The merging process occurred when the walls of two or more adjacent potholes were breached by the outward expansion of each pothole. The deeper of the two potholes captured the pebbles of the adjacent pothole. When pebbles are captured, pothole growth is terminated and the more shallow pothole was gradually cannibalized. All of the features within the channel are overprinted with a strong asymmetry caused by the current-driven pebbles against the upstream side of the features. Consequently, the upstream side of the features tends to be smooth, convex and rounded; whereas, the downstream side tends to be concave with the leading edge of the feature pointing in the downstream direction.

  14. Thermal Pretreatment of Wood for Cogasification/cofiring of Biomass and Coal

    SciTech Connect (OSTI)

    Wang, Ping; Howard, Bret; Hedges, Sheila; Morreale, Bryan; Van Essendelft, Dirk; Berry, David

    2013-10-29T23:59:59.000Z

    Utilization of biomass as a co-feed in coal and biomass co-firing and co-gasification requires size reduction of the biomass. Reducing biomass to below 0.2 mm without pretreatment is difficult and costly because biomass is fibrous and compressible. Torrefaction is a promising thermal pretreatment process and has the advantages of increasing energy density, improving grindability, producing fuels with more homogenous compositions and hydrophobic behavior. Temperature is the most important factor for the torrefaction process. Biomass grindability is related to cell wall structure, thickness and composition. Thermal treatment such as torrefaction can cause chemical changes that significantly affect the strength of biomass. The objectives of this study are to understand the mechanism by which torrefaction improves the grindability of biomass and discuss suitable temperatures for thermal pretreatment for co-gasification/cofiring of biomass and coal. Wild cherry wood was selected as the model for this study. Samples were prepared by sawing a single tangential section from the heartwood and cutting it into eleven pieces. The samples were consecutively heated at 220, 260, 300, 350, 450 and 550oC for 0.5 hr under flowing nitrogen in a tube furnace. Untreated and treated samples were characterized for physical properties (color, dimensions and weight), microstructural changes by SEM, and cell wall composition changes and thermal behaviors by TGA and DSC. The morphology of the wood remained intact through the treatment range but the cell walls were thinner. Thermal treatments were observed to decompose the cell wall components. Hemicellulose decomposed over the range of ~200 to 300oC and resulted in weakening of the cell walls and subsequently improved grindability. Furthermore, wood samples treated above 300oC lost more than 39% in mass. Therefore, thermal pretreatment above the hemicelluloses decomposition temperature but below 300oC is probably sufficient to improve grindability and retain energy value.

  15. Development and demonstration of a wood-fired gas turbine system

    SciTech Connect (OSTI)

    Smith, V.; Selzer, B.; Sethi, V.

    1993-08-01T23:59:59.000Z

    The objectives of the test program were to obtain some preliminary information regarding the nature of particulate and vapor phase alkali compounds produced and to assess any deleterious impact they might have on materials of construction. Power Generating Incorporated (PGI) is developing a wood-fired gas turbine system for specialized cogeneration applications. The system is based on a patented pressurized combustor designed and tested by PGI in conjunction with McConnell Industries. The other components of the system are fuel receiving, preparation, storage and feeding system, gas clean-up equipment, and a gas turbine generator.

  16. Conversion of a black liquor recovery boiler to wood firing: A case history

    SciTech Connect (OSTI)

    Eleniewski, M.A. [Detroit Stoker Company, Monroe, MI (United States)

    1994-12-31T23:59:59.000Z

    In 1983 a large integrated pulp and paper mill in southeastern United States retired an older chemical recovery boiler when it was replaced by a newer and larger unit as part of a mill expansion. At that time the mill was generating steam and power using wood waste, natural gas and black liquor, a common fuel mix for pulp mills. The retirement of the recovery boiler presented an opportunity for the mill and corporate engineering to evaluate various mixes of fuels for the mill.

  17. Process Optimization Assessments at Fort Leonard Wood, Missouri and Fort Carson, Colorado

    E-Print Network [OSTI]

    Lin, M.; Vavrin, J.; Smith, W.

    2004-01-01T23:59:59.000Z

    for process energy efficiency improvements and reductions of pollutant emissions at Fort Leonard Wood and Fort Carson, using the process energy and pollution reduction (PEPR) methodology and the process optimization guide, both of which are tools developed.../CERL Technical Report, TR- 03-8, April 2003. 3. Lin, Mike C.J., et al. "Process Energy and Pollution Reduction (PEPR) Level I Review at the Watervliet Arsenal, New York" USACERL Technical Report 99/92, November 1999. 4. Lin, Mike C.J., Walter Smith...

  18. Water Sampling At Hot Lake Area (Wood, 2002) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED Jump to: navigation,Area (Wood, 2002) Jump to: navigation,

  19. Water Sampling At Mickey Hot Springs Area (Wood, 2002) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED Jump to: navigation,Area (Wood, 2002) Jump| Open

  20. Water Sampling At Salton Sea Area (Wood, 2002) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED Jump to: navigation,Area (Wood, 2002) Jump|Salton Sea Area

  1. Water Sampling At Umpqua Hot Springs Area (Wood, 2002) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTED Jump to: navigation,Area (Wood, 2002)Information Area

  2. Property:Building/SPPurchasedEngyPerAreaKwhM2WoodChips | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,Pillar GroupInformationInformation ElctrtyTotalInformation WoodChips

  3. 01-02-2008 - Wood Cabinet Falls Apart | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOnItemResearch >Internship ProgramBiomassUniversityNuclear SecurityFeb 168 - Wood

  4. An Additive Resin Reaction Product, a Method of Treating a Wood Product,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternative FuelsSanta FeAuthorization forAmesAmmaropticaland a Wood

  5. Green Gasoline from Wood Using Carbona Gasification and Topsoe TIGAS Processes

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(Fact Sheet), Geothermal TechnologiesGeothermalGoGreat Green Gasoline from Wood

  6. The high strain rate response of PVC foams and end-grain balsa wood V.L. Tagarielli, V.S. Deshpande, N.A. Fleck *

    E-Print Network [OSTI]

    Fleck, Norman A.

    The high strain rate response of PVC foams and end-grain balsa wood V.L. Tagarielli, V.S. Deshpande are adequately approximated by power-law fits. The compressive yield strength of the H250 PVC foam and balsa wood s?1 . In contrast, the H100 PVC foam displays only a small elevation in uniaxial compressive

  7. Expert Paper for the UNECE, Timber Committee Market Discussions, Geneva, 7-8 October 2003 1 Trends and Market Effects of Wood Energy Policies

    E-Print Network [OSTI]

    behind the increased interest for wood energy. Bioenergy promotion policy in certain countries Swedish University of Agricultural Sciences (SLU), Department of Bioenergy, P.O. Box 7060, SE-750 07 and Market Effects of Wood Energy Policies By Dr. Bengt Hillring1 Department of Bioenergy Swedish University

  8. A review of "Exiled from Light: Divine Law, Morality and Violence in Miltons Samson Agonistes." by Derek N. C. Wood

    E-Print Network [OSTI]

    Stephen M. Buhler

    2003-01-01T23:59:59.000Z

    in a virtuous light, sim- ply a younger warrior curious about an aged veteran past his prime: ?Mohammad [sic] Ali meeting Joe Louis? (154), in Wood?s strangely cross-generational analogue. The result is that his examples insist on a particularity...

  9. Syngas production by plasma treatments of alcohols, bio-oils and wood This article has been downloaded from IOPscience. Please scroll down to see the full text article.

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Syngas production by plasma treatments of alcohols, bio-oils and wood This article has been Contact us My IOPscience #12;Syngas production by plasma treatments of alcohols, bio-oils and wood K to recover energy from biomass. The Syngas produced from biomass can be used to power internal combustion

  10. MARKET BASED K.G. DULEEP

    E-Print Network [OSTI]

    OF MODEL Model under development for DOE-EIA is an integrated supply and demand module that forecasts survey data. #12;MODEL - USES Current parallel work effort focuses on market based strategies to reduce

  11. Cordes Graefe KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergy Offshore Place:WindOil andBasicsKontor

  12. Leitner Hubert KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |Jilin Zhongdiantou NewKoreaLaor BatteriesLedong Xinyuanreview

  13. Experience with improved charcoal and wood stoves for households and institutions in Kenya

    SciTech Connect (OSTI)

    Hyman, E.L.

    1985-01-01T23:59:59.000Z

    Efforts at promoting more fuel-efficient charcoal stoves to replace traditional charcoal stoves in Kenya offer some lessons for the dissemination of appropriate technologies. This paper looks at the market-based approach which has made the Kenyan charcoal stoves project a success. Trends in woodfuels (wood and charcoal) consumption in Kenya are identified; the traditional technology for charcoal combustion and the upgraded traditional technologies are described; production achievement and the dissemination and promotion strategy used are examined; and a financial and economic analysis is performed with social, health and environmental effects assessed. Other ways to achieve a more favourable balance between woodfuels consumption and supply are then discussed looking at more efficient charcoal kilns and household woodstoves, improved institutional stoves and increased wood production. The replication potential of the Kenya experiment in other countries is also explored. The lessons learnt from the the Kenya experience concern the relationship between technology, choice and delivery systems as they interact with, economic, institutional, and policy factors. In this case, the design work accepted the traditional technology as a starting point which helped ensure widespread acceptance by households. The potential desirability of relying on local artisans to manufacture consumer durables using existing private sector channels to market these goods is also shown. It also highlights the importance of going beyond a laissez-faire approach and supporting training, demonstration, and publicity to faciliate the workings of the private sector. In the Kenyan case, technology choice was relatively unsubsidized and left ot the preferences of consumers.

  14. Thermal Impact of Fasteners in High-Performance Wood-Framed Walls: Preprint

    SciTech Connect (OSTI)

    Christensen, D.

    2011-01-01T23:59:59.000Z

    Buildings are heavy consumers of energy, and residential building design is rapidly addressing topics to maximize energy conservation en route to net-zero energy consumption. Annual energy analysis of a building informs the choice among disparate energy measures, for cost, durability, occupant comfort, and whole-house energy use. Physics-based and empirical models of elements of a building are used in such analyses. High-performance wood-framed walls enable builders to construct homes that use much less than 40% of the energy consumed by similar homes built to minimum code. Modeling for these walls has considered physical features such as framing factor, insulation and framing properties, roughness and convective effects, and air leakage. The thermal effects of fasteners used to construct these walls have not been fully evaluated, even though their thermal conductivity is orders of magnitudes higher than that of other building materials. Drywall screws and siding nails are considered in this finite element thermal conductivity analysis of wall sections that represent wood-framed walls that are often used in high-performance homes. Nails and screws reduce even the best walls' insulating performance by approximately 3% and become increasingly significant as the framing factor increases.

  15. Alternatives for balanced production of fibers, chemicals, and energy from wood

    SciTech Connect (OSTI)

    Sjoestroem, E.

    1983-01-01T23:59:59.000Z

    Increased oil prices and shortage of fossil materials have recently focused interest on the possibilities of conversion of wood to various forms of fuels and chemicals. It is to be expected that new approaches are emerging from the totality of the research effort now in progress. However, irrespective of this, the function of wood as a construction material and a source for fibers presumably remains unchanged or even becomes more important in the future. In regard to the principal pulping methods for production of fibers, no abrupt changes in current practices are probable, apart from important progress in energy saving. In a very favorable situation of the kraft process, when surplus energy generated from the burning of black liquor is availiable, a partial recovery of dissolved organic solids, such as lignin and carbohydrates and their degradation products, becomes more attractive. Quite different is the case of the conventional sulfite process when evaporation and burning of the spent liquor result in severe air pollution. Successful recovery, conversion, and marketing of the dissolved solids can then be the only way to compensate for the expense of using external fuel. Alternatives for production of organic chemicals from kraft and sulfite spent liquors are discussed by taking into consideration the fiber production, composition of dissolved solids, energy requirements, pollution problems, and recovery of inorganic pulping chemicals. 11 references, 10 figures, 5 tables

  16. fed ad libitum until slaughter at 2 kg live weight, as either pellets, mash (60 p. 100 meal, 4o p. 100 water) or meal in a 2 X3factorial design with 4 replicates.

    E-Print Network [OSTI]

    Boyer, Edmond

    fed ad libitum until slaughter at 2 kg live weight, as either pellets, mash (60 p. 100 meal, 4o p week period for 8 M /D mash and meal diets were - 0.264 and 6.218 g DI,G on 8 M /D pellets 12 M/D pellets, mash and meal were 33.10, 27.90 and z6.si g, respectively (SED ± 2.321 g

  17. On Cipher-Dependent Related-Key Attacks in the Ideal-Cipher Model M.R. Albrecht1, P. Farshim2, K.G. Paterson2, and G.J. Watson3

    E-Print Network [OSTI]

    On Cipher-Dependent Related-Key Attacks in the Ideal-Cipher Model M.R. Albrecht1, P. Farshim2, K.G. Paterson2, and G.J. Watson3 1 INRIA, Paris-Rocquencourt Center, SALSA Project UPMC Univ Paris 06, UMR 7606, Canada T2N 1N4 gjwatson@ucalgary.ca Abstract. Bellare and Kohno introduced a formal framework

  18. Milestone Report - Demonstrate Braided Material with 3.5 g U/kg Sorption Capacity under Seawater Testing Condition (Milestone M2FT-15OR0310041 - 1/30/2015)

    SciTech Connect (OSTI)

    Janke, Christopher James [ORNL; Das, Sadananda [ORNL; Oyola, Yatsandra [ORNL; Mayes, Richard T [ORNL; Gill, Gary [Pacific Northwest National Laboratory (PNNL); Kuo, Li-Jung [Pacific Northwest National Laboratory (PNNL); Wood, Jordana [Pacific Northwest National Laboratory (PNNL)

    2015-01-01T23:59:59.000Z

    This report describes work on the successful completion of Milestone M2FT-15OR0310041 (1/30/2015) entitled, Demonstrate braided material with 3.5 g U/kg sorption capacity under seawater testing condition . This effort is part of the Seawater Uranium Recovery Program, sponsored by the U.S. Department of Energy, Office of Nuclear Energy, and involved the development of new adsorbent braided materials at the Oak Ridge National Laboratory (ORNL) and marine testing at the Pacific Northwest National Laboratory (PNNL). ORNL has recently developed four braided fiber adsorbents that have demonstrated uranium adsorption capacities greater than 3.5 g U/kg adsorbent after marine testing at PNNL. The braided adsorbents were synthesized by braiding or leno weaving high surface area polyethylene fibers and conducting radiation-induced graft polymerization of itaconic acid and acrylonitrile monomers onto the braided materials followed by amidoximation and base conditioning. The four braided adsorbents demonstrated capacity values ranging from 3.7 to 4.2 g U/kg adsorbent after 56 days of exposure in natural coastal seawater at 20 oC. All data are normalized to a salinity of 35 psu.

  19. February 16-18, 2011 / Biel (Bienne), Switzerland Comparison between accelerated thermo-hydro aged wood and naturally

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    February 16-18, 2011 / Biel (Bienne), Switzerland Comparison between accelerated thermo-hydro aged Bois 3 DEISTAF ­ University of Florence, Italy Key words: accelerated aging, micro-mechanics, thermo-hydro]. It has been observed that similar degradation can be found in thermo-hydro (TH) treated wood [4]. The aim

  20. Early maturation processes in coal.1 Part 1: Pyrolysis mass balances and structural evolution of coalified wood from the2

    E-Print Network [OSTI]

    Paris-Sud XI, Universit de

    Early maturation processes in coal.1 Part 1: Pyrolysis mass balances and structural evolution of coalified wood from the2 Morwell Brown Coal seam3 4 Elodie Salmon a, c , Franoise Behar a , Franois Lorant force21 field to simulate the thermal stress. The Morwell coal has been selected to study the thermal22

  1. Insight into trade-off between wood decay and parasitism from the genome of a fungal forest pathogen

    SciTech Connect (OSTI)

    Olson, Ake; Aerts, Andrea; Asiegbu, Fred; Belbahri, Lassaad; Bouzid, Ourdia; Broberg, Anders; Canback, Bjorn; Coutinho, Pedro M.; Cullen, Dan; Dalman, Kerstin; Deflorio, Giuliana; van Diepen, Linda T. A.; Dunand, Christophe; Duplessis, Sebastien; Durling, Mikael; Gonthier, Paolo; Grimwood, Jane; Fossdal, Carl Gunnar; Hansson, David; Henrissat, Bernard; Hietala, Ari; Himmelstrand, Kajsa; Hoffmeister, Dirk; Hogberg, Nils; James, Timothy Y.; Karlsson, Magnus; Kohler, Annegret; Lucas, Susan; Lunden, Karl; Morin, Emmanuelle; Murat, Claude; Park, Jongsun; Raffaello, Tommaso; Rouze, Pierre; Salamov, Asaf; Schmutz, Jeremy; Solheim, Halvor; Stahlberg, Jerry; Velez, Heriberto; de Vries, Ronald P.; Wiebenga, Ad; Woodward, Steve; Yakovlev, Igor; Garbelotto, Matteo; Martin, Francis; Grigoriev, Igor V.; Stenlid, Jan

    2012-01-01T23:59:59.000Z

    Parasitism and saprotrophic wood decay are two fungal strategies fundamental for succession and nutrient cycling in forest ecosystems. An opportunity to assess the trade-off between these strategies is provided by the forest pathogen and wood decayer Heterobasidion annosum sensu lato. We report the annotated genome sequence and transcript profiling, as well as the quantitative trait loci mapping, of one member of the species complex: H. irregulare. Quantitative trait loci critical for pathogenicity, and rich in transposable elements, orphan and secreted genes, were identified. A wide range of cellulose-degrading enzymes are expressed during wood decay. By contrast, pathogenic interaction between H. irregulare and pine engages fewer carbohydrate-active enzymes, but involves an increase in pectinolytic enzymes, transcription modules for oxidative stress and secondary metabolite production. Our results show a trade-off in terms of constrained carbohydrate decomposition and membrane transport capacity during interaction with living hosts. Our findings establish that saprotrophic wood decay and necrotrophic parasitism involve two distinct, yet overlapping, processes.

  2. Tin Anode for Sodium-Ion Batteries Using Natural Wood Fiber as a Mechanical Buffer and Electrolyte Reservoir

    E-Print Network [OSTI]

    Li, Teng

    Tin Anode for Sodium-Ion Batteries Using Natural Wood Fiber as a Mechanical Buffer and Electrolyte Information ABSTRACT: Sodium (Na)-ion batteries offer an attractive option for low cost grid scale storage due to the abundance of Na. Tin (Sn) is touted as a high capacity anode for Na-ion batteries with a high theoretical

  3. Table 8. Summary list of tools exclusively for either wood or paper-based products Procurement Policy

    E-Print Network [OSTI]

    SOLID WOOD The Leadership in Energy and Environmental Design (LEED) Green Building Rating System US products only from verifiably legal and SFM. Management system compliant with UK central government Trade Traceability Monitoring and verification Legality SFM Geographic areas of interest Main issues

  4. Dover Textiles - A Case History on Retrofitting Factories with a Boiler System Fueled on Coal, Wood and Waste

    E-Print Network [OSTI]

    Pincelli, R. D.

    1981-01-01T23:59:59.000Z

    The shortage of affordable gas and oil boiler fuels and the recent Iran/Iraq war underscores the urgent need for the American industrial system to convert to domestically controlled fuels and particularly coal, wood, and waste. More talk than action...

  5. Does the Giant Wood Spider Nephila pilipes Respond to Prey Variation by Altering Web or Silk Properties?

    E-Print Network [OSTI]

    Blackledge, Todd

    Does the Giant Wood Spider Nephila pilipes Respond to Prey Variation by Altering Web or Silk Chung-Hsing University, Taichung, Taiwan Introduction Historically, orb webs constructed by spiders to construct webs are easy to quantify (Eber- hard 1990; Craig 1992; Pasquet et al. 1994; Sandoval 1994

  6. Michigan Technological University is an equal opportunity educational institution/equal opportunity employer. Michigan Tech Wood to Wheels Laboratories

    E-Print Network [OSTI]

    transportation biofuel starting with wood biomass using an integrated set of laboratory-scale experiments Gain a more complete understanding of the sustainability issues surrounding biofuels produced from forest of biofuels coupled with advanced technologies as methods to meet future CAFE, CO2, and emissions regulations

  7. Forest carbon storage in the northeastern United States: Net effects of harvesting frequency, post-harvest retention, and wood products

    E-Print Network [OSTI]

    Vermont, University of

    26 December 2009 Keywords: Carbon sequestration Wood products Structural retention Harvesting tradeoffs among scenarios using a factorial treatment design and two-way ANOVA. Mean carbon sequestrationForest carbon storage in the northeastern United States: Net effects of harvesting frequency, post

  8. Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste

    E-Print Network [OSTI]

    Florida, University of

    Evaluation of XRF and LIBS technologies for on-line sorting of CCA-treated wood waste Helena M technologies evaluated included X-ray fluorescence spectroscopy (XRF) and laser induced breakdown spectroscopy (LIBS). The XRF detector system utilized in this study was capable of rapidly detecting the presence

  9. Please consider the environment before printing Cameroon agrees to cut illegal wood out of its supply chain

    E-Print Network [OSTI]

    Please consider the environment before printing Cameroon agrees to cut illegal wood out of its hardwoods, Cameroon, has announced today a trade agreement with the European Union (EU) to rid all illegal and consumers of tropical timber, Cameroon and the EU have a joint responsibility to eradicate illegal logging

  10. A Preliminary Study of Oxidation of Lignin from Rubber Wood to Vanillin in Ionic Liquid Medium

    E-Print Network [OSTI]

    Shamsuri, A A

    2013-01-01T23:59:59.000Z

    In this study, lignin was oxidised to vanillin by means of oxygen in ionic liquid (1,3-dimethylimidazolium methylsulphate) medium. The parameters of the oxidation reaction that have been investigated were the following: concentration of oxygen (5, 10, 15 and 20 ft3 h-1), reaction time (2, 4, 6, 8 and 10 h) and reaction temperature (25, 40, 60, 80 and 100{\\deg}C). The Fourier transform infrared spectroscopy, high performance liquid chromatography and ultraviolet-visible analyses were used to characterise the product. The results revealed vanillin as the product obtained via the oxidation reaction. The optimum parameters of vanillin production were 20 ft3 h-1 of oxygen for 10 h at 100{\\deg}C. In conclusion, 1,3-dimethylimidazolium methylsulphate could be used as an oxidation reaction medium for the production of vanillin from rubber wood lignin.

  11. Measurement of wood/plant cell or composite material attributes with computer assisted tomography

    DOE Patents [OSTI]

    West, Darrell C.; Paulus, Michael J.; Tuskan, Gerald A.; Wimmer, Rupert

    2004-06-08T23:59:59.000Z

    A method for obtaining wood-cell attributes from cellulose containing samples includes the steps of radiating a cellulose containing sample with a beam of radiation. Radiation attenuation information is collected from radiation which passes through the sample. The source is rotated relative to the sample and the radiation and collecting steps repeated. A projected image of the sample is formed from the collected radiation attenuation information, the projected image including resolvable features of the cellulose containing sample. Cell wall thickness, cell diameter (length) and cell vacoule diameter can be determined. A system for obtaining physical measures from cellulose containing samples includes a radiation source, a radiation detector, and structure for rotating the source relative to said sample. The system forms an image of the sample from the radiation attenuation information, the image including resolvable features of the sample.

  12. Reservoir characterization and performance predictions for the E.N. Woods lease

    SciTech Connect (OSTI)

    Aka-Milan, Francis A.

    2000-07-07T23:59:59.000Z

    The task of this work was to evaluate the past performance of the E.N. WOODS Unit and to forecast its future economic performance by taking into consideration the geology, petrophysics and production history of the reservoir. The Decline Curve Analysis feature of the Appraisal of Petroleum Properties including Taxation Systems (EDAPT) software along with the Production Management Systems (PMS) software were used to evaluate the original volume of hydrocarbon in place and estimate the reserve. The Black Oil Simulator (BOAST II) was then used to model the waterflooding operation and estimate the incremental oil production attributable to the water injection. BOAST II was also used to predict future performance of the reservoir.

  13. Life history and habitat associations of the broad wood cockroach, Parcoblatta lata (Blattaria: Blattellidae) and other native cockroaches in the Coastal Plain of South Carolina.

    SciTech Connect (OSTI)

    Horn, Scott; Hanula, James, L.

    2002-06-18T23:59:59.000Z

    Wood cockroaches are an important prey of the red-cockaded woodpecker, Picoides borealis, an endangered species inhabiting pine forests in the southern United States. These woodpeckers forage on the boles of live pine trees, but their prey consists of a high proportion of wood cockroaches, Parcoblatta spp., that are more commonly associated with dead plant material. Cockroach population density samples were conducted on live pine trees, dead snags and coarse woody debris on the ground. The studies showed that snags and logs are also important habitats of wood cockroaches in pine forests.

  14. 51Gamma Ray Bubbles in the Milky Way NASA's Fermi Gamma-ray Space Telescope has unveiled a previously

    E-Print Network [OSTI]

    of these bubbles A) in kilograms? B) in solar mass units if 1 SMU = 2.0 x 10 30 kg? Problem 3 - Suppose of these bubbles A) in kilograms? B) in solar mass units if 1 SMU = 2.0 x 10 30 kg? Answer: A) Mass in one cubic) In solar mass units M= 1.4 x 10 27 kg x (1 SMU/2.0x 10 30 kg) = 1.1 x 10 10 solar masses. Problem 3

  15. Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites

    SciTech Connect (OSTI)

    Thompson, David N.; Emerick, Robert W.; England, Alfred B.; Flanders, James P.; Loge, Frank J.; Wiedeman, Katherine A.; Wolcott, Michael P.

    2010-03-31T23:59:59.000Z

    In this project, we proposed to produce wood fiber reinforced thermoplastic composites (WFRTCs) using microbial thermoplastic polyesters in place of petroleum-derived plastic. WFRTCs are a rapidly growing product area, averaging a 38% growth rate since 1997. Their production is dependent on substantial quantities of petroleum based thermoplastics, increasing their overall energy costs by over 230% when compared to traditional Engineered Wood Products (EWP). Utilizing bio-based thermoplastics for these materials can reduce our dependence on foreign petroleum. We have demonstrated that biopolymers (polyhydroxyalkanoates, PHA) can be successfully produced from wood pulping waste streams and that viable wood fiber reinforced thermoplastic composite products can be produced from these materials. The results show that microbial polyester (PHB in this study) can be extruded together with wastewater-derived cell mass and wood flour into deck products having performance properties comparable to existing commercial HDPE/WF composite products. This study has thus proven the underlying concept that the microbial polyesters produced from waste effluents can be used to make cost-effective and energy-efficient wood-plastic composites. The cost of purified microbial polyesters is about 5-20 times that of HDPE depending on the cost of crude oil, due to high purification (40%), carbon substrate (40%) and sterilized fermentation (20%) costs for the PHB. Hence, the ability to produce competitive and functional composites with unpurified PHA-biomass mixtures from waste carbon sources in unsterile systemswithout cell debris removalis a significant step forward in producing competitive value-added structural composites from forest products residuals using a biorefinery approach. As demonstrated in the energy and waste analysis for the project, significant energy savings and waste reductions can also be realized using this approach. We recommend that the next step for development of useful products using this technology is to scale the technology from the 700-L pilot reactor to a small-scale production facility, with dedicated operation staff and engineering controls. In addition, we recommend that a market study be conducted as well as further product development for construction products that will utilize the unique properties of this bio-based material.

  16. Research Associate Rearing and Identification of Wood-boring Beetles Intercepted in US Ports Xavier University & USDA APHIS PPQ CPHST Otis Laboratory

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    intercepted insects from ports, and rearing insects in host wood or artificial diets. Identification at Buzzards Bay, Massachusetts. This job requires fine motor skills, and the ability to lift up to 20 pounds

  17. A cell is not a pan of water: Problems with using [delta]D composition in wood cellulose to interpret climate

    SciTech Connect (OSTI)

    Terwilliger, V.J.; Deniro, M.J. (Univ. of Kansas, Lawrence (United States) Univ. of California, Santa Barbara (United States))

    1993-06-01T23:59:59.000Z

    If the isotopic composition of hydrogen in tree ring cellulose is related to that of water at the site of cellulose synthesis, then it records climatic information. Relationships between [delta]D tree ring cellulose and climate have been found, yet the mechanisms of hydrogen fractionation in the synthesis of wood cellulose were not examined. We grew avocadoes in water of controlled isotopic composition at different humidities until their stems became woody. Ambient humidity was consistently related to the isotopic composition of leaf water and leaf cellulose but not to wood cellulose. Both leaf and wood cellulose [delta]D values were higher than those of environmental water indicating that some of the hydrogen had been reallocated from stored post photosynthetic compounds. Effects of stored compounds on the isotopic composition of wood cellulose could significantly confound paleoclimatic reconstructions from this method.

  18. Methanol production from eucalyptus wood chips. Attachment IV. Health and safety aspects of the eucalypt biomass to methanol energy system

    SciTech Connect (OSTI)

    Fishkind, H.H.

    1982-06-01T23:59:59.000Z

    The basic eucalyptus-to-methanol energy process is described and possible health and safety risks are identified at all steps of the process. The toxicology and treatment for exposure to these substances are described and mitigating measures are proposed. The health and safety impacts and risks of the wood gasification/methanol synthesis system are compared to those of the coal liquefaction and conversion system. The scope of this report includes the health and safety risks of workers (1) in the laboratory and greenhouse, where eucalyptus seedlings are developed, (2) at the biomass plantation, where these seedlings are planted and mature trees harvested, (3) transporting these logs and chips to the refinery, (4) in the hammermill, where the logs and chips will be reduced to small particles, (5) in the methanol synthesis plant, where the wood particles will be converted to methanol, and (6) transporting and dispensing the methanol. Finally, the health and safety risks of consumers using methanol is discussed.

  19. Solar energy for wood drying using direct or indirect collection with supplemental heating: a computer analysis. Forest Service research paper

    SciTech Connect (OSTI)

    Tschernitz, J.L.

    1986-01-01T23:59:59.000Z

    In order to judge solar drying on a more quantitative basis, the Forest Products Laboratory has developed a computer analysis for calculating the energy demands in the restricted cases of direct and indirect solar wood dryers using supplemental energy. Calculated energy balances are reported including percent fuel savings compared to the net energy used in conventional dryer operation. Six dryer sizes are considered. Seasonal variation of performance is noted for each of 12 months, in 96 locations throughout the United States. Also discussed is variation of cover thermal properties as these influence the effectiveness of operation. The report attempts to organize these economic elements so that the reader can make reasonable choices for any wood-drying requirements.

  20. Analysis of wood-energy production and consumption strategies among small-scale farmers in central Kenya

    SciTech Connect (OSTI)

    Mwangi, A.M.

    1992-01-01T23:59:59.000Z

    This study focuses on wood-energy production and consumption strategies among small-scale farm households in central Kenya. The specific objective were: (1) to determine how households had responded to specific wood-energy policies; (2) to identify factors associated with household adoption or non-adoption of the strategies. Different programs aimed at addressing wood-energy shortages in Kenya were initiated or strengthened during the 1980s: fuelwood or multipurpose tree planting; development and dissemination of improved stoves and fireplaces; promotion of increased accessibility to wood-energy substitutes. Household adoption levels for policy-supported strategies have remained low despite promotion. Survey data from two villages in Nyeri district were collected to determine the factors associated with adoption of the Kenya Ceramic Jiko, the [open quotes]Kuni Mbili[close quotes] stove/fireplace, kerosene stoves, electric cookers, and fuelwood or multipurpose tree planting. Adoption rates varied from as low as 1 percent for electricity to 43 percent for the Kenya Ceramic Jiko. Important policy variables included extension visits per year, income levels, years of formal education received by head of household, access to different fuels, area of farm-land owned, household size, and locational characteristics of the villages. Policy recommendations included: use of research results to direct policy; improvement of information flows between policy makers, extension agents, and technology-users; increased support of agroforestry; and better program coordination. Recommendations for further research included: examining more areas where efficiency gains in energy production and consumption can be made, extending the study to cover the drier parts of central Kenya, and conducting regular case studies in order to better understand the adoption process over time.

  1. Fuel-supply structure of wood-fired power plants in the Northeast: Loggers' perspective. Forest Service research paper

    SciTech Connect (OSTI)

    Huyler, N.K.

    1989-07-01T23:59:59.000Z

    This study gauges loggers' perceptions of the impact of large biomass demand centers (electrical power generation) on the forest resource base in the Northeast. The loggers who supply these demand centers are business people with large capital investments in highly mechanized harvesting systems. Most of the loggers surveyed strongly believed that the post-harvest stand has improved as a result of fuel-wood chipping; however, the impact of chip harvesting on the forest resource base was not clear.

  2. Bark beetle and wood borer infestation in the greater Yellowstone area during four postfire years. Forest Service research paper

    SciTech Connect (OSTI)

    Rasmussen, L.A.; Amman, G.D.; Vandygriff, J.C.; Oakes, R.D.; Munson, A.S.

    1996-03-01T23:59:59.000Z

    Surveys of bark beetle and wood borer infestation in the Greater Yellowstone Area were conducted from 1991 through 1993 to determine the effect of delayed tree mortality on mosaics of fire-killed and green tree stands, the relationship between fire injury and infestation, but both types of mortality greatly altered the mosaics immediately apparent after the 1988 fires. The high level of infestation suggests that insects built up in fire-injured trees and then caused increased infestation of uninjured trees.

  3. Environmental assessment of the atlas bio-energy waste wood fluidized bed gasification power plant. Final report

    SciTech Connect (OSTI)

    Holzman, M.I.

    1995-08-01T23:59:59.000Z

    The Atlas Bio-Energy Corporation is proposing to develop and operate a 3 MW power plant in Brooklyn, New York that will produce electricity by gasification of waste wood and combustion of the produced low-Btu gas in a conventional package steam boiler coupled to a steam-electric generator. The objectives of this project were to assist Atlas in addressing the environmental permit requirements for the proposed power plant and to evaluate the environmental and economic impacts of the project compared to more conventional small power plants. The project`s goal was to help promote the commercialization of biomass gasification as an environmentally acceptable and economically attractive alternative to conventional wood combustion. The specific components of this research included: (1) Development of a permitting strategy plan; (2) Characterization of New York City waste wood; (3) Characterization of fluidized bed gasifier/boiler emissions; (4) Performance of an environmental impact analysis; (5) Preparation of an economic evaluation; and (6) Discussion of operational and maintenance concerns. The project is being performed in two phases. Phase I, which is the subject of this report, involves the environmental permitting and environmental/economic assessment of the project. Pending NYSERDA participation, Phase II will include development and implementation of a demonstration program to evaluate the environmental and economic impacts of the full-scale gasification project.

  4. Groundwater Fate and Transport Modeling for Texarkana Wood Preserving Company Superfund Site, Texarkana, Texas

    SciTech Connect (OSTI)

    Arnett, Ronald Chester

    1999-08-01T23:59:59.000Z

    Fate and transport model results are presented for the Texarkana Wood Preserving Company (TWPC)superfund site. The conceptual model assumes two sources of contamination, specifically, the areas around the old and new process areas. Recent data show the presence of non-aqueous phase liquids (NAPL) in the aquifer that are also sources of dissolved contamination in the aquifer. A flow model was constructed and calibrated against measured hydraulic heads at permanent monitoring wells. Good matches were obtained between model simulated heads and most measured heads. An unexplained exception occurs at monitoring well MW-13 down gradient of the site beyond the measured contaminant plume where the model predicts heads that are more than 2 ft. lower than reported field measurements. Adjusting hydraulic parameters in the model could not account for this anomaly and still preserve the head matches at other wells. There is likely a moderate deficiency in the conceptual model or perhaps a data error. Other information such as substantial amounts of infiltrating surface water in the area or a correction in surveyed elevation would improve the flow model. A particle tracking model calculated a travel time from the new process area to the Days Creek discharge location on the order of 40 years. Travel times from the old process area to Days Creek were calculated to be on the order of 80 years. While these calculations are subject to some uncertainty, travel times of decades are indicated.

  5. System Modeling of ORNL s 20 MW(t) Wood-fired Gasifying Boiler

    SciTech Connect (OSTI)

    Daw, C Stuart [ORNL; FINNEY, Charles E A [ORNL; Wiggins, Gavin [ORNL; Hao, Ye [ORNL

    2010-01-01T23:59:59.000Z

    We present an overview of the new 20 MW(t) wood-fired steam plant currently under construction by Johnson Controls, Inc. at the Oak Ridge National Laboratory in Tennessee. The new plant will utilize a low-temperature air-blown gasifier system developed by the Nexterra Systems Corporation to generate low-heating value syngas (producer gas), which will then be burned in a staged combustion chamber to produce heat for the boiler. This is considered a showcase project for demonstrating the benefits of clean, bio-based energy, and thus there is considerable interest in monitoring and modeling the energy efficiency and environmental footprint of this technology relative to conventional steam generation with petroleum-based fuels. In preparation for system startup in 2012, we are developing steady-state and dynamic models of the major process components, including the gasifiers and combustor. These tools are intended to assist in tracking and optimizing system performance and for carrying out future conceptual studies of process changes that might improve the overall energy efficiency and sustainability. In this paper we describe the status of our steady-state gasifier and combustor models and illustrate preliminary results from limited parametric studies.

  6. Gasoline from Wood via Integrated Gasification, Synthesis, and Methanol-to-Gasoline Technologies

    SciTech Connect (OSTI)

    Phillips, S. D.; Tarud, J. K.; Biddy, M. J.; Dutta, A.

    2011-01-01T23:59:59.000Z

    This report documents the National Renewable Energy Laboratory's (NREL's) assessment of the feasibility of making gasoline via the methanol-to-gasoline route using syngas from a 2,000 dry metric tonne/day (2,205 U.S. ton/day) biomass-fed facility. A new technoeconomic model was developed in Aspen Plus for this study, based on the model developed for NREL's thermochemical ethanol design report (Phillips et al. 2007). The necessary process changes were incorporated into a biomass-to-gasoline model using a methanol synthesis operation followed by conversion, upgrading, and finishing to gasoline. Using a methodology similar to that used in previous NREL design reports and a feedstock cost of $50.70/dry ton ($55.89/dry metric tonne), the estimated plant gate price is $16.60/MMBtu ($15.73/GJ) (U.S. $2007) for gasoline and liquefied petroleum gas (LPG) produced from biomass via gasification of wood, methanol synthesis, and the methanol-to-gasoline process. The corresponding unit prices for gasoline and LPG are $1.95/gallon ($0.52/liter) and $1.53/gallon ($0.40/liter) with yields of 55.1 and 9.3 gallons per U.S. ton of dry biomass (229.9 and 38.8 liters per metric tonne of dry biomass), respectively.

  7. A review of techno-economic modeling methodology for a wood-to-ethanol process

    SciTech Connect (OSTI)

    Gregg, D.J.; Saddler, J.N. [Univ. of British Columbia, Vancouver (Canada)

    1997-12-31T23:59:59.000Z

    Techno-economic modeling has been a valuable tool in directing and assessing the research and development efforts for biomass-to-ethanol processes. In developing a techno-economic model of a {open_quotes}generic{close_quotes} wood-to-ethanol process, we decided to follow a three-pronged design approach. This initially consisted of a detailed review of the current definition and technical maturity of the process, which concluded that the process remains complex and immature. More recently, we have critically assessed/compared two inherited models, and examined the historical and current trends in modeling design. We confirmed that process complexity and immaturity, in association with the capabilities of the available modeling tools and the ease with which they can be used, influenced the design and implementation of past models. We have discussed these influences with reference to our own model development decisions. For example, on review of two inherited techno-economic models, we decided that our new model would require a greater degree of flexibility in its structure and user interface. 16 refs., 9 figs.

  8. High-temperature aerosol formation in wood pellets flames: Spatially resolved measurements

    SciTech Connect (OSTI)

    Wiinikka, Henrik; Gebart, Rikard [Energy Technology Centre, Box 726, S-941 28 Piteaa (Sweden); Boman, Christoffer; Bostroem, Dan; Nordin, Anders; OEhman, Marcus [Energy Technology and Thermal Process Chemistry, Umeaa University, S-901 87 Umeaa (Sweden)

    2006-12-15T23:59:59.000Z

    The formation and evolution of high-temperature aerosols during fixed bed combustion of wood pellets in a realistic combustion environment were investigated through spatially resolved experiments. The purpose of this work was to investigate the various stages of aerosol formation from the hot flame zone to the flue gas channel. The investigation is important both for elucidation of the formation mechanisms and as a basis for development and validation of particle formation models that can be used for design optimization. Experiments were conducted in an 8-kW-updraft fired-wood-pellets combustor. Particle samples were withdrawn from the centerline of the combustor through 10 sampling ports by a rapid dilution sampling probe. The corresponding temperatures at the sampling positions were in the range 200-1450{sup o}C. The particle sample was size-segregated in a low-pressure impactor, allowing physical and chemical resolution of the fine particles. The chemical composition of the particles was investigated by SEM/EDS and XRD analysis. Furthermore, the experimental results were compared to theoretical models for aerosol formation processes. The experimental data show that the particle size distribution has two peaks, both of which are below an aerodynamic diameter of 2.5 {mu}m (PM{sub 2.5}). The mode diameters of the fine and coarse modes in the PM{sub 2.5} region were {approx}0.1 and {approx}0.8 {mu}m, respectively. The shape of the particle size distribution function continuously changes with position in the reactor due to several mechanisms. Early, in the flame zone, both the fine mode and the coarse mode in the PM{sub 2.5} region were dominated by particles from incomplete combustion, indicated by a significant amount of carbon in the particles. The particle concentrations of both the fine and the coarse mode decrease rapidly in the hot oxygen-rich flame due to oxidation of the carbon-rich particles. After the hot flame, the fine mode concentration and particle diameter increase gradually when the temperature of the flue gas drops. The main contribution to this comes from condensation on preexisting particles in the gas of alkali sulfates, alkali chlorides, and Zn species formed from constituents vaporized in the fuel bed. The alkali sulfates were found to condense at a temperature of {approx}950{sup o} and alkali chlorides condensed later at {approx}600{sup o}. This agrees well with results of chemical equilibrium calculation of the gas-to-particle conversion temperature. After the hot flame the coarse mode concentration decreased very little when the flue gas was cooled. In addition to carbon, the coarse mode consists of refractory metals and also considerable amounts of alkali. (author)

  9. Correlating benzene, total hydrocarbon and carbon monoxide emissions from wood-fired boilers

    SciTech Connect (OSTI)

    Hubbard, A.J.; Grande, D.E.; Berens, J.R. [Wisconsin Dept. of Natural Resources, Madison, WI (United States); Piotrowski, J. [Tenneco Packaging, Inc., Tomahawk, WI (United States)

    1997-12-31T23:59:59.000Z

    Hazardous air pollutants, including benzene, are generated by the incomplete combustion of fuels. Organic compound emissions, which are generally products of incomplete combustion, are reduced by promoting high quality combustion, for example by controlling furnace exit temperatures and establishing minimum residence times. Monitoring carbon monoxide (CO) emissions is important since the amount of carbon monoxide emitted represents the quality of combustion which in turn represents the amount of hazardous air pollutants being generated. Total hydrocarbon (THC) emissions are also related to the quality of combustion. Recently the Wisconsin Department of Natural Resources (DNR) measured the benzene and total hydrocarbon emissions from two large industrial wood fired boilers. These boilers are located at Tenneco Packaging, a container board manufacturing facility in northern Wisconsin. Temperature, oxygen and carbon monoxide concentrations were sampled continuously by Tenneco Packaging`s emission monitoring system. The Department`s team used an organic vapor analyzer to continuously measure concentrations of total hydrocarbons (THC). The Department`s team also used a modified USEPA Method 18 sampling train to capture organic vapors for subsequent analysis by gas chromatography. The data show correlations between benzene and carbon monoxide, and between benzene and THC concentrations. The emissions sampling occurred both upstream of the particulate emissions control system as well as at the stack. The CO variations during actual boiler operation appeared to be well correlated with changes in boiler steam load. That is, increases in CO generally accompanied a change, either up or down, in boiler load. Lower concentrations of CO were associated with stable combustion, as indicated by periods of constant or nearly constant boiler load.

  10. Evaluation of Gas, Oil and Wood Pellet Fueled Residential Heating System Emissions Characteristics

    SciTech Connect (OSTI)

    McDonald, R.

    2009-12-01T23:59:59.000Z

    This study has measured the emissions from a wide range of heating equipment burning different fuels including several liquid fuel options, utility supplied natural gas and wood pellet resources. The major effort was placed on generating a database for the mass emission rate of fine particulates (PM 2.5) for the various fuel types studied. The fine particulates or PM 2.5 (less than 2.5 microns in size) were measured using a dilution tunnel technique following the method described in US EPA CTM-039. The PM 2.5 emission results are expressed in several units for the benefit of scientists, engineers and administrators. The measurements of gaseous emissions of O{sub 2}, CO{sub 2}, CO, NO{sub x} and SO{sub 2} were made using a combustion analyzer based on electrochemical cells These measurements are presented for each of the residential heating systems tested. This analyzer also provides a steady state efficiency based on stack gas and temperature measurements and these values are included in the report. The gaseous results are within the ranges expected from prior emission studies with the enhancement of expanding these measurements to fuels not available to earlier researchers. Based on measured excess air levels and ultimate analysis of the fuel's chemical composition the gaseous emission results are as expected and fall within the range provided for emission factors contained in the US-EPA AP 42, Emission Factors Volume I, Fifth Edition. Since there were no unexpected findings in these gaseous measurements, the bulk of the report is centered on the emissions of fine particulates, or PM 2.5. The fine particulate (PM 2.5) results for the liquid fuel fired heating systems indicate a very strong linear relationship between the fine particulate emissions and the sulfur content of the liquid fuels being studied. This is illustrated by the plot contained in the first figure on the next page which clearly illustrates the linear relationship between the measured mass of fine particulate per unit of energy, expressed as milligrams per Mega-Joule (mg/MJ) versus the different sulfur contents of four different heating fuels. These were tested in a conventional cast iron boiler equipped with a flame retention head burner. The fuels included a typical ASTM No. 2 fuel oil with sulfur below 0.5 percent (1520 average ppm S), an ASTM No. 2 fuel oil with very high sulfur content (5780 ppm S), low sulfur heating oil (322 ppm S) and an ultra low sulfur diesel fuel (11 ppm S). Three additional oil-fired heating system types were also tested with normal heating fuel, low sulfur and ultralow sulfur fuel. They included an oil-fired warm air furnace of conventional design, a high efficiency condensing warm air furnace, a condensing hydronic boiler and the conventional hydronic boiler as discussed above. The linearity in the results was observed with all of the different oil-fired equipment types (as shown in the second figure on the next page). A linear regression of the data resulted in an Rsquared value of 0.99 indicating that a very good linear relationship exits. This means that as sulfur decreases the PM 2.5 emissions are reduced in a linear manner within the sulfur content range tested. At the ultra low sulfur level (15 ppm S) the amount of PM 2.5 had been reduced dramatically to an average of 0.043 mg/MJ. Three different gas-fired heating systems were tested. These included a conventional in-shot induced draft warm air furnace, an atmospheric fired hydronic boiler and a high efficiency hydronic boiler. The particulate (PM 2.5) measured ranged from 0.011 to 0.036 mg/MJ. depending on the raw material source used in their manufacture. All three stoves tested were fueled with premium (low ash) wood pellets obtained in a single batch to provide for uniformity in the test fuel. Unlike the oil and gas fired systems, the wood pellet stoves had measurable amounts of particulates sized above the 2.5-micron size that defines fine particulates (less than 2.5 microns). The fine particulate emissions rates ranged from 22 to 30 mg/ MJ with an average value

  11. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    SciTech Connect (OSTI)

    Tajau, Rida; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang, Selangor (Malaysia); Ibrahim, Mohammad Izzat [Faculty of Science, University of Malaya (UM), 50603 Kuala Lumpur (Malaysia); Yunus, Nurulhuda Mohd [Faculty of Science and Technology, National University Malaysia (UKM), 43600 Bangi, Selangor (Malaysia)

    2014-02-12T23:59:59.000Z

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough.

  12. Modification of alkaline pulping to facilitate the isolation of aliphatic acids. Part 1. Sodium hydroxide pretreatment of pine wood

    SciTech Connect (OSTI)

    Alen, R.; Niemelae, K.; Sjoestroem, E.

    1984-01-01T23:59:59.000Z

    Pretreating pine chips (Pinus sylvestris) with sodium hydroxide prior to the alkaline delignification kraft, kraft-anthraquinone, and soda-anthraquinone) can facilitate the recovery of the carbohydrate degradation products from alkaline pulping liquors. Under suitable pretreatment conditions large amounts of carbohydrate degradation products (alipahtic acids) were formed relative to lignin. The lignin fraction was composed of comparatively low-molecular-weight fragments. Although the delignification was considerably retarded and the yield (based on wood) was decreased by 1-3%, the properties of the resulting pulp were essentially maintained despite pretreatment. Finally, data are given for the composition of aliphatic acids in liquors resulting from pretreatments.

  13. A vegetational analysis of an East Texas bottomland hardwood area with special emphasis on wood duck habitat

    E-Print Network [OSTI]

    Morrill, William Irl

    1976-01-01T23:59:59.000Z

    in each of 5 activities during each hour of the day. 46 LIST OF FIGURES Figures Page Map of the Angelina-Neches Scientific Area in Jasper County, Texas, showing the four vegetative types and the major water bodies including the Angelina and Neches...) with days at each level on a line and the average designated by a dashed line. 7 Nap of the Angelina-Neches Scientific Area in Jasper County, Texas, showing the ten sloughs (shaded) that wood duck activity transects were run on marked by a number...

  14. Technology demonstration summary: Bio Trol soil-washing system for treatment of a wood-preserving site

    SciTech Connect (OSTI)

    Not Available

    1992-03-01T23:59:59.000Z

    The Superfund Innovative Technology Evaluation (SITE) Program was instituted in 1986 to promote the development and application of innovative technologies to the remediation of Superfund and other sites contaminated with hazardous wastes. The Project Summary highlights the results of an evaluation of a specific arrangement of the three technologies of the BSWS. The system consists of multiple stages of physical abrasion, attrition, flotation, and washing of excavated soil in the BSW. The site selected for the evaluation is a wood preserving facility in New Brighton, MN, where creosote and pentachlorophenol were used for several decades.

  15. Interactive Effects of Climate Change and Decomposer Communities on the Stabilization of Wood-Derived Carbon Pools: Catalyst for a New Study

    SciTech Connect (OSTI)

    Resh, Sigrid C. [Michigan Technological University

    2014-11-17T23:59:59.000Z

    Globally, forest soils store ~two-thirds as much carbon (C) as the atmosphere. Although wood makes up the majority of forest biomass, the importance of wood contributions to soil C pools is unknown. Even with recent advances in the mechanistic understanding of soil processes, integrative studies tracing C input pathways and biological fluxes within and from soils are lacking. Therefore, our research objectives were to assess the impact of different fungal decay pathways (i.e., white-rot versus brown-rot)in interaction with wood quality, soil temperature, wood location (i.e., soil surface and buried in mineral soil), and soil textureon the transformation of woody material into soil CO2 efflux, dissolved organic carbon (DOC), and soil C pools. The use of 13C-depleted woody biomass harvested from the Rhinelander, WI free-air carbon dioxide enrichment (Aspen-FACE) experiment affords the unique opportunity to distinguish the wood-derived C from other soil C fluxes and pools. We established 168 treatment plots across six field sites (three sand and three loam textured soil). Treatment plots consisted of full-factorial design with the following treatments: 1. Wood chips from elevated CO2, elevated CO2 + O3, or ambient atmosphere AspenFACE treatments; 2. Inoculated with white rot (Bjerkandera adusta) or brown rot (Gloeophyllum sepiarium) pure fungal cultures, or the original suite of endemic microbial community on the logs; and 3. Buried (15cm in soil as a proxy for coarse roots) or surface applied wood chips. We also created a warming treatment using open-topped, passive warming chambers on a subset of the above treatments. Control plots with no added wood (no chip control) were incorporated into the research design. Soils were sampled for initial ?13C values, CN concentrations, and bulk density. A subset of plots were instrumented with lysimeters for sampling soil water and temperature data loggers for measuring soil temperatures. To determine the early pathways of decomposition, we measured soil surface CO2 efflux, dissolved organic C (DOC), and DO13C approximately monthly over two growing seasons from a subsample of the research plots. To determine the portion of soil surface CO2 efflux attributable to wood-derived C, we used Keeling plot techniques to estimate the associated ?13C values of the soil CO2 efflux. We measured the ?13CO2 once during the peak of each growing season. Initial values for soil ?13C values and CN concentrations averaged across the six sites were -26.8 (standard error = 0.04), 2.46% (se = 0.11), and 0.15% (se = 0.01), respectively. The labeled wood chips from the Aspen FACE treatments had an average ?13C value of -39.5 (se 0.10). The >12 isotopic difference between the soil and wood chip ?13C values provides the basis for tracking the wood-derived C through the early stages of decomposition and subsequent storage in the soil. Across our six research sites, average soil surface CO2 efflux ranged from 1.04 to 2.00 g CO2 m-2 h-1 for the first two growing seasons. No wood chip controls had an average soil surface CO2 efflux of 0.67 g CO2 m-2 h-1 or about half of that of the wood chip treatment plots. Wood-derived CO2 efflux was higher for loam textured soils relative to sands (0.70 and 0.54 g CO2 m-2 h-1, respectively; p = 0.045)), for surface relative to buried wood chip treatments (0.92 and 0.39 g CO2 m-2 h-1, respectively; p < 0.001), for warmed relative to ambient temperature treatments (0.99 and 0.78 g CO2 m-2 h-1, respectively; 0.004), and for natural rot relative to brown and white rots (0.93, 0.82, and 0.78 g CO2 m-2 h-1, respectively; p = 0.068). Our first two growing seasons of soil surface CO2 efflux data show that wood chip location (i.e., surface vs. buried chip application) is very important, with surface chips loosing twice the wood-derived CO2. The DOC data support this trend for greater loss of ecosystem C from surface chips. This has strong implications for the importance of root and buried wood for ecosystem C retention. This strong chip location effect

  16. Barge loading facilities in conjunction with wood chipping and sawlog mill, Tennessee River Mile 145. 9R: Environmental assessment

    SciTech Connect (OSTI)

    Not Available

    1990-08-01T23:59:59.000Z

    The purpose of this Environmental Assessment (EA) is to evaluate the environmental consequences of approving, denying, or adopting reasonable alternatives to a request for barge loading facilities. These facilities would serve a proposed wood chipping and sawlog products operation at Tennessee River Mile (TRM) 145.9, right descending bank, (Kentucky Lake), in Perry County, Tennessee. The site is located between Short Creek and Peters Landing. The applicant is Southeastern Forest Products, L.P. (SFP), Box 73, Linden, Tennessee and the proposed facilities would be constructed on or adjacent to company owned land. Portions of the barge terminal would be constructed on land over which flood easement rights are held by the United States of America and administered by the Tennessee Valley Authority (TVA). The US Army Corps of Engineers (CE) and TVA have regulatory control over the proposed barge terminal facilities since the action would involve construction in the Tennessee River which is a navigable water of the United States. The wood chipping and sawlog products facilities proposed on the upland property are not regulated by the CE or TVA. On the basis of the analysis which follows, it has been determined that a modified proposal (as described herein) would not significantly affect the quality of the human environment, and does not require the preparation of an environmental impact statement. 8 refs.

  17. SpaceX 2 Cargo Manifest TOTAL CARGO: 575 kilograms / 1268 pounds

    E-Print Network [OSTI]

    supplies Lego MSG gloves #12;12 PIG SCK SPHERES VCAM EXPRESS Rack Stowage Lockers Surplus +4C Ice Supply Pack o Top. & Inj. Medications Pack o Oral Meds Pack ECLSS o H2 Sensor ORU o ACY Urine Filter

  18. Electron-beam processing of kilogram quantities of iridium for radioisotope thermoelectric generator applications

    SciTech Connect (OSTI)

    Huxford, T.J.; Ohriner, E.K.

    1992-01-01T23:59:59.000Z

    Iridium alloys are used as fuel-cladding materials in radioisotope thermoelectric generators (RTGs). Hardware produced at the Oak Ridge National Laboratory (ORNL) has been used in Voyagers I and 2, Galilee, and Ulysses spacecraft. An integral part of the production of iridium-sheet metal involves electron-beam (EB) processing. These processes include the degassing of powder-pressed compacts followed by multiple meltings in order to purify 500-g buttons of Ir-0.3% W alloy. Starting in 1972 and continuing into 1992, our laboratory EB processing was Performed (ca. 1970) in a 60-kW (20 kV at 3 A), two-gun system. In 1991, a new 150-kW EB gun facility was installed to complement the older unit. This paper describes how the newly installed system was qualified for production of RTG developmental work is discussed that will potentially improve the existing process by utilizing the capabilities of the new EB system.

  19. Electron-beam processing of kilogram quantities of iridium for radioisotope thermoelectric generator applications

    SciTech Connect (OSTI)

    Huxford, T.J.; Ohriner, E.K.

    1992-12-31T23:59:59.000Z

    Iridium alloys are used as fuel-cladding materials in radioisotope thermoelectric generators (RTGs). Hardware produced at the Oak Ridge National Laboratory (ORNL) has been used in Voyagers I and 2, Galilee, and Ulysses spacecraft. An integral part of the production of iridium-sheet metal involves electron-beam (EB) processing. These processes include the degassing of powder-pressed compacts followed by multiple meltings in order to purify 500-g buttons of Ir-0.3% W alloy. Starting in 1972 and continuing into 1992, our laboratory EB processing was Performed (ca. 1970) in a 60-kW (20 kV at 3 A), two-gun system. In 1991, a new 150-kW EB gun facility was installed to complement the older unit. This paper describes how the newly installed system was qualified for production of RTG developmental work is discussed that will potentially improve the existing process by utilizing the capabilities of the new EB system.

  20. conversion ratio (the amount of body weight gained for every kilogram of

    E-Print Network [OSTI]

    Newcastle upon Tyne, University of

    aquaculture systems, offshore systems, aquaponic systems, advances in modelling of aquaculture impacts

  1. M.D./PH.D. PROGRAM GENERAL INFORMATION The Department of Molecular Biology has joined forces with UMDNJ Robert Wood Johnson

    E-Print Network [OSTI]

    M.D./PH.D. PROGRAM GENERAL INFORMATION The Department of Molecular Biology has joined forces with UMDNJ Robert Wood Johnson Medical School (RWJMS) and Rutgers to create a multi-institutional M Chiarchiaro (Princeton). ADMISSIONS: A maximum of six students are admitted each year by an M

  2. CONTRIBUTIONS fROM THE BIOLOGICAL LABORATORY Of THE BUREAU Of fISHERIES AT WOODS HOLE, MASS. THE PHYSIOLOGY OF THE DIGESTIVE TRAer OF ELASMOBRANCHS.

    E-Print Network [OSTI]

    . THE PHYSIOLOGY OF THE DIGESTIVE TRAer OF ELASMOBRANCHS. By MICHAEL X. SULLIVAN, Ph. D. BUREAU OF FISHERIES OF THE BUREAU OF FISHERIES AT WOODS HOLE. MASS. THE PHYSIOLOGY OF THE DIGESTIVE TRACT OF ELASMOBRANCHS. By MICHAEL X. SULLIVAN, PH. D. INTRODUCTION. The digestive tract in fishes has been studied quite extensively

  3. UBC Social Ecological Economic Development Studies (SEEDS) Student Report The Use of Wood in Construction: A Triple Bottom Line Assessment of the use of

    E-Print Network [OSTI]

    to Reinforced Concrete Christopher Barr, Alvin, Lam Wei Wei University of British Columbia APSC261 November 30 at UBC. We urge you to contact the research persons mentioned in a report or the SEEDS Coordinator about impacts focuses on the comparison of the life-cycle carbon emissions associated with laminated wood

  4. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into the Use of Wood vs. Steel and Concrete in

    E-Print Network [OSTI]

    into the Use of Wood vs. Steel and Concrete in Construction of the New SUB Fardin Barekat, Ding Yuan Han. Steel and Concrete in Construction of the New SUB APSC 261: Technology and Society I Presented to: Dr, timber, concrete, and steel. For each material, this report will provide environmental, economic

  5. Efficacy of Aqui-S as an Anesthetic for Market-Sized Striped Bass L. CURRY WOODS III,* DANIEL D. THEISEN, AND SHUYANG HE

    E-Print Network [OSTI]

    Hamza, Iqbal

    for the temperate striped bass Morone saxatilis. Methods Source of fish and anesthetic.--All of the striped bassEfficacy of Aqui-S as an Anesthetic for Market-Sized Striped Bass L. CURRY WOODS III,* DANIEL D 20742, USA Abstract.--Market-sized 2-year-old striped bass Morone saxatilis (average weight, 645 g) were

  6. Field testing of an automated wood-combustion system and development of business plan for commercialization of production. Final report for period ending August 1, 1982

    SciTech Connect (OSTI)

    None

    1983-05-24T23:59:59.000Z

    A tunnel burner for burning wood chips has been installed and tested at a school building in Durham, NC. The test revealed many problems which did not exist while testing a prototype in laboratories. Controls were found to work reliably. A business plan was developed and is appended. (LEW)

  7. Designing a Coarse-grained Reconfigurable Architecture for Power Efficiency Allan Carroll, Stephen Friedman, Brian Van Essen, Aaron Wood, Benjamin Ylvisaker,

    E-Print Network [OSTI]

    Hauck, Scott

    of Computer Science and Engineering Department of Electrical Engineering University of Washington University, with re- spect to a traditional island-style FPGA. Additionally, we are continuing previous research}@cs.washington.edu). A. Wood and S. Hauck are with the Department of Electrical En- gineering, University of Washington

  8. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation Into the Technology Behind the Manufacturing of Sugar Cane and Wood

    E-Print Network [OSTI]

    . To compensate for the increasing demand in paper and wood fibre pulp, sugar cane paper, which uses bagasse, has been introduced to the market. Bagasse is a by-product that remains after sugarcane and sorghum stalks worldwide has come from agricultural crops, such as bagasse. Currently, an increasing number of companies

  9. Slumping Economy Reduces Sawlog Prices In Europe And North America to Lowest Levels in Five Years, Reports The Wood Resource Quarterly

    E-Print Network [OSTI]

    Slumping Economy Reduces Sawlog Prices In Europe And North America to Lowest Levels in Five Years Europe. Finnish sawmills currently have some of the highest wood raw-material costs of all countries regular updates of the latest developments in international timber, pulp, lumber and biomass markets

  10. Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper Science and Technology; Georgia Institute of Technology, Atlanta, GA.

    E-Print Network [OSTI]

    Strategic Utilization of Paper/Wood Waste for Biodiesel Fuel Art J. Ragauskas, Institute of Paper lignocellulosics to biodiesel fuel Feedstocks ABSTRACT This poster examines the potential of utilizing waste paper CelluloseHemicelluloseLigninResource Cracking and Refining of Polysaccharides Bio-Diesel Substitutes

  11. Renewable Hydrogen: Technology Review and Policy Recommendations for State-Level Sustainable Energy Futures

    E-Print Network [OSTI]

    Lipman, Timothy; Edwards, Jennifer Lynn; Brooks, Cameron

    2006-01-01T23:59:59.000Z

    can be produced from coal gasification at delivered costs ofper kilogram. Gasification of Coal and Other Hydrocarbons Inkg/day Small Coal Oxygen-blown Gasification 313,090 kg/day

  12. advanced plutonium fuels: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Offices. In addition to the plutonium, the feed stock also contains about 17 tonnes of depleted uranium, about 600 kg of highly enriched uranium, and many kilograms of neptunium...

  13. RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

    SciTech Connect (OSTI)

    Dr. James A. Burger

    2002-02-04T23:59:59.000Z

    This is the first quarterly Technical Report for the period October-December, 2003. A kick-off meeting was held with NETL administrators and scientists at Morgantown, WV, on December 2, 2002. The purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. During this first quarterly reporting period, five Graduate Research Assistants were recruited, an MOA was drafted between Virginia Tech and three industry cooperators, preliminary field locations for controlled studies were located, and a preliminary analysis of a carbon inventory of forest sites on mined land was made.

  14. Solar-energy-system performance-evaluation update: Wood Road School, Ballston Spa, New York, October 1982-April 1983

    SciTech Connect (OSTI)

    Kendall, P

    1983-01-01T23:59:59.000Z

    The Wood Road School Solar Project is a 216,000 square foot combined elementary and middle school in Ballston Spa, New York. The solar energy system supplies energy to the space heating and domestic hot water subsystems. Heat is collected by flat plate collector panels and stored in two storage tanks. Performance data are given for the system overall and for each of the four subsystems - energy collection, storage, space heating, and domestic hot water. Data are also provided on operating energy, energy savings, and weather conditions. Design and actual system solar fraction are compared, and percentage of incident solar energy and collected solar energy utilized are given. Also given are building loads analysis, system thermal losses, and system coefficient of performance. (LEW)

  15. Sorghum Bran, Chestnut Wood Powder, and Chardonnay Grape Seed Flour Addition Effect on Lipid Oxidation and Color in Ground Beef Patties

    E-Print Network [OSTI]

    Roybal, Tabitha Lynn

    2012-02-14T23:59:59.000Z

    &M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 2010 Major Subject: Food Science and Technology SORGHUM BRAN, CHESTNUT WOOD POWDER, AND CHARDONNAY GRAPE SEED FLOUR ADDITION EFFECT... by: Chair of Committee, Rhonda K. Miller Committee Members, Lloyd Rooney Joseph M. Awika Peter S. Murano Intercollegiate Faculty Chair, Jimmy Keeton December 2010 Major Subject: Food Science and Technology iii ABSTRACT...

  16. WoodChemistry Wood Degradation & Preservation

    E-Print Network [OSTI]

    Geldenhuys, Jaco

    bagasse to pro- duce paper pulps, value added biopolymers and bioethanol. The possibility to integrate pre

  17. Tree-ring growth and wood chemistry response to manipulated precipitation variation for two temperate Quercus species

    SciTech Connect (OSTI)

    Wagner, Rebekah J. [Pennsylvania State University, University Park, PA; Kaye, Margot W. [Pennsylvania State University, University Park, PA; Abrams, Marc D. [Pennsylvania State University, University Park, PA; Hanson, Paul J [ORNL; Martin, Madhavi Z [ORNL

    2012-01-01T23:59:59.000Z

    We examined the relationship among ambient and manipulated precipitation, wood chemistry, and their relationship with radial growth for two oak species in eastern Tennessee. The study took place on the Walker Branch Throughfall Displacement Experiment (TDE) site, located at the Oak Ridge National Laboratory in Oak Ridge, TN. Two dominant species, white oak (Quercus alba) and chestnut oak (Quercus prinus), were selected for study from a 13-year experiment of whole-stand precipitation manipulation (wet, ambient and dry). The relationships between tree-ring width and climate were compared for both species to determine the impact of precipitation manipulations on ring width index. This study used experimental spectroscopy techniques to measure the sensitivity of tree-ring responses to directional changes in precipitation over 13 years, and the results suggest that oaks at this study site are resilient to imposed changes, but sensitive to inter-annual variations in climate. Laser-induced breakdown spectroscopy (LIBS) allowed us to measure nutrient intensities (similar to element concentrations) at 0.5-1.0 mm spacing along the radial growth axis of trees growing in the wet, ambient, and dry treatment sites. A difference in stemwood nutrient levels was observed between the two oak species and among the three treatments. Significant variation in element intensity was observed across treatments for some elements (Ca, K, Mg, Na, N and P) suggesting the potential for long-term impacts on growth under a changing climate regimes for southeastern oaks.

  18. Standard practice for acoustic emission examination of pressurized containers made of fiberglass reinforced plastic with balsa wood cores

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2007-01-01T23:59:59.000Z

    1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This practice is limited to cylindrical shape containers, 0.5 m [20 in.] to 3 m [120 in.] in diameter, of sandwich construction with balsa wood core and over 30 % glass (by weight) FRP skins. Reinforcing material may be mat, roving, cloth, unidirectional layers, or a combination thereof. There is no restriction with regard to fabrication technique or method of design. 1.3 This practice is limited to containers that are designed for less than 0.520 MPa [75.4 psi] (gage) above static pressure head due to contents. 1.4 This practice does not specify a time interval between examinations for re-qualification of a pressure container. 1.5 This practice is used to determine if a container is suitable for service or if follow-up NDT is needed before ...

  19. , I`..4kg1TORE G Pignataro)il

    E-Print Network [OSTI]

    Bella, Giampaolo

    per il raffreddamento del syngas tramite macchine frigorifere tipo dry-cooler, chiller e macchine ad dry-cooler, chiller e macchine ad assorbimento", - PONO2_00451_33362376/1 (BI04810) - da svolgersi

  20. A study of Kg/Ko values from reservoir performance

    E-Print Network [OSTI]

    Young, Gerald Sewall

    1957-01-01T23:59:59.000Z

    this work as the pe'essure and gas-oil ratio history of the remaining two wells indicated, they were still producing undersaturated oil. The portion of ths reservoir studied contained 21, 875 net effective sere-feet of pay over an areal extent of 1, 225... as Indicated by Recent Gas In)ection Experinents and Reservoir- . Perfornance History?2 API and Production P~rt (1946), P. 1 0. Musket? Mep ?Physical Principles of Oil Production?p McGraw-H11I Book Con Inc H , (19/9)p p. A67. Patton, E. Cep Jr...

  1. A study of Kg/Ko values from reservoir performance

    E-Print Network [OSTI]

    Young, Gerald Sewall

    1957-01-01T23:59:59.000Z

    factor at current pressure, barrels reservoir oil per barrel stook tank oil bo = forjsation volune factor at original yressure, barrels reservoir oil per barrel stock tank oil TABLE 3 VOLUEETRIC CALCULATIOEE POR FIELD?A? R-r (36V9 - ISO~ ( ~0 026... absolute. This study was concluded when the average reservoir pressure had decU. ned to 4, , 3Q, pounds per square inch absolute. This pressure deoline was accompanied by the production sf 566, 137 barrels of stock tank oil and 2, ling, 310 standar4 MCF...

  2. MT Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant Jump to:LandownersLuther, Oklahoma:EnergyECO Auger <SmarTurbineMIT-MRINewMT Energie

  3. GEE Energy GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489InformationFrenchtown, NewG2 Energy Jump to:GEE Energy GmbH Co

  4. CIS Solartechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainable andBucoda,BurkeNebraska:CDMValencia JumpLtdCIS Solartechnik GmbH

  5. ETBKN GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A Potential MicrohydroDistrict ofDongjinDynetek42EOPEPODESBESPE Jump

  6. Energiefeld Bayern GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJump to:Emminol Jump to:Energ tica CamposEnergieEnergiefeld Bayern

  7. Fuel 21 GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife EnergyFreight Best

  8. GETproject GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife EnergyFreightFulongFuturoGEA

  9. Fichtner GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania:57427°,Ferry County, Washington: EnergyFibrominn

  10. Meihui Windpark GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDIT REPORTEnergyFarmsPower CoLongxing WindMaoming ZhongRanchMeihui

  11. RIO Energie GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCalifornia Sector: Wind energy Product:Anatolia Jump to:REpowerRIO

  12. SSB Antriebstechnik GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCalifornia Sector: WindRiegotec Internacional ltdaSEGSSSB

  13. AVANCIS GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEE Jump to: navigation, search40 -Solar GmbHASP

  14. RUSOL GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History Facebook iconQuito,Jump to: navigation,REpowerRPMRRRS

  15. Rapsveredelung Vorpommern GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History Facebook iconQuito,Jump to:RadiantRappaport Consulting Jump

  16. Renion Biogas GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History FacebookRegenesysRenewable Hawaii IncRenewableRenewed

  17. SGL Rotec GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump to:Energy InformationS WSERTRONIC

  18. Schunk Group GmbH Co KG | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump638324°,Schnell Z ndstrahlmotoren AG CoSchunk

  19. Property:Dry Mass (kg) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,PillarPublicationType JumpDOEInvolve Jumpallowed values for thisDraft(m) Jump

  20. Property:Dry Mass(kg) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,PillarPublicationType JumpDOEInvolve Jumpallowed values for thisDraft(m)