Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Daylighting: Measuring the Performance of Light Shelves and Occupant-Controlled Blinds on a Dimmed Lighting Systems  

E-Print Network [OSTI]

The design of a day lighted space is both an art and a science. The biggest challenge facing the lighting designer is to admit only as much light as necessary and distribute it evenly throughout the space without introducing glare or heat. In warm...

Floyd, D. B.; Parker, D. S.

1998-01-01T23:59:59.000Z

2

Dimming every light cheaply  

SciTech Connect (OSTI)

This paper discusses the successful development and testing of the first ballast/IBECS network interface that will allow commercially-available controllable ballasts to be operated from the Internet via IBECS (Integrated Building Environmental Communications System). The interface, which is expected to cost original equipment manufacturers (OEMs) only about $1-2/unit, has been hardened so that it is impervious to electronic noise generated by most 0-10 VDC controllable ballasts.

Rubinstein, Francis; Pettler, Peter; Jennings, Judith

2002-03-27T23:59:59.000Z

3

Advanced Demand Responsive Lighting  

E-Print Network [OSTI]

Advanced Demand Responsive Lighting Host: Francis Rubinstein Demand Response Research Center demand responsive lighting systems ­ Importance of dimming ­ New wireless controls technologies · Advanced Demand Responsive Lighting (commenced March 2007) #12;Objectives · Provide up-to-date information

4

Driver Circuit for White LED Lamps with TRIAC Dimming Control.  

E-Print Network [OSTI]

??An efficient Light Emitting Diode (LED) lamp driver circuit is proposed for retrofitting the conventionally used incandescent lamps with existing TRIAC dimmer. The dimming feature (more)

Weng, Szu-Jung

2012-01-01T23:59:59.000Z

5

Energy Conservation Utilizing Wireless Dimmable Lighting Control  

E-Print Network [OSTI]

results & discussion Future research #12;2 Background & Motivation Energy Usage & Potential Savings Lighting accounts for 25-30% of energy usage in building electrical systems Energy savings can be generated Energy Efficiency with Personal Lighting Preferences Light level tuning · Generates energy savings

Agogino, Alice M.

6

Demand Responsive Lighting: A Scoping Study  

SciTech Connect (OSTI)

The objective of this scoping study is: (1) to identify current market drivers and technology trends that can improve the demand responsiveness of commercial building lighting systems and (2) to quantify the energy, demand and environmental benefits of implementing lighting demand response and energy-saving controls strategies Statewide. Lighting systems in California commercial buildings consume 30 GWh. Lighting systems in commercial buildings often waste energy and unnecessarily stress the electrical grid because lighting controls, especially dimming, are not widely used. But dimmable lighting equipment, especially the dimming ballast, costs more than non-dimming lighting and is expensive to retrofit into existing buildings because of the cost of adding control wiring. Advances in lighting industry capabilities coupled with the pervasiveness of the Internet and wireless technologies have led to new opportunities to realize significant energy saving and reliable demand reduction using intelligent lighting controls. Manufacturers are starting to produce electronic equipment--lighting-application specific controllers (LAS controllers)--that are wirelessly accessible and can control dimmable or multilevel lighting systems obeying different industry-accepted protocols. Some companies make controllers that are inexpensive to install in existing buildings and allow the power consumed by bi-level lighting circuits to be selectively reduced during demand response curtailments. By intelligently limiting the demand from bi-level lighting in California commercial buildings, the utilities would now have an enormous 1 GW demand shed capability at hand. By adding occupancy and light sensors to the remotely controllable lighting circuits, automatic controls could harvest an additional 1 BkWh/yr savings above and beyond the savings that have already been achieved. The lighting industry's adoption of DALI as the principal wired digital control protocol for dimming ballasts and increased awareness of the need to standardize on emerging wireless technologies are evidence of this transformation. In addition to increased standardization of digital control protocols controller capabilities, the lighting industry has improved the performance of dimming lighting systems over the last two years. The system efficacy of today's current dimming ballasts is approaching that of non-dimming program start ballasts. The study finds that the benefits of applying digital controls technologies to California's unique commercial buildings market are enormous. If California were to embark on an concerted 20 year program to improve the demand responsiveness and energy efficiency of commercial building lighting systems, the State could avoid adding generation capacity, improve the elasticity of the grid, save Californians billion of dollars in avoided energy charges and significantly reduce greenhouse gas emissions.

Rubinstein, Francis; Kiliccote, Sila

2007-01-03T23:59:59.000Z

7

Kyler Nelson Light Timer  

E-Print Network [OSTI]

designated by the user, the Arduino board will dim the light to save energy. The user designates the time instance, the light is dimmed using pulse width modulation (PWM) in the Arduino's pin number 11

Kachroo, Pushkin

8

Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data  

E-Print Network [OSTI]

Gallium Lighting, LLC, Accepts Inaugural Position on the Industry Advisory Board of UC-Light Center to Help Bring Wireless Data Communications Capabilities to LED Lights Fayetteville, GA ­ February 10, 2011 ­Gallium Lighting, LLC, announced today it has accepted an inaugural position

9

Daylighting, dimming, and the electricity crisis in California  

SciTech Connect (OSTI)

Dimming controls for electric lighting have been one of the mainstays of the effort to use daylighting to reduce annual lighting energy consumption. The coincidence of daylighting with electric utility peak demand makes daylighting controls an effective strategy for reducing commercial building peak electric loads. During times of energy shortage, there is a greatly increased need to reduce electricity use during peak periods, both to ease the burden on electricity providers and to control the operating costs of buildings. The paper presents a typical commercial building electric demand profile during summer, and shows how daylighting-linked lighting controls and load shedding techniques can reduce lighting at precisely those times when electricity is most expensive. We look at the importance of dimming for increasing the reliability of the electricity grid in California and other states, as well as examine the potential cost-effectiveness of widespread use of daylighting to save energy and reduce monthly electricity bills.

Rubinstein, Francis; Neils, Danielle; Colak, Nesrin

2001-09-17T23:59:59.000Z

10

The Inconvenient Truth About Coronal Dimmings  

E-Print Network [OSTI]

We investigate the occurrence of a CME-driven coronal dimming using unique high resolution spectral images of the corona from the Hinode spacecraft. Over the course of the dimming event we observe the dynamic increase of non-thermal line broadening in the 195.12Angstrom emission line of Fe XII as the corona opens. As the corona begins to close, refill and brighten, we see a reduction of the non-thermal broadening towards the pre-eruption level. We propose that the dynamic evolution of non-thermal broadening is the result of the growth of Alfven wave amplitudes in the magnetically open rarefied dimming region, compared to the dense closed corona prior to the CME. We suggest, based on this proposition, that, as open magnetic regions, coronal dimmings must act just as coronal holes and be sources of the fast solar wind, but only temporarily. Further, we propose that such a rapid transition in the thermodynamics of the corona to a solar wind state may have an impulsive effect on the CME that initiates the observed dimming. This last point, if correct, poses a significant physical challenge to the sophistication of CME modeling and capturing the essence of the source region thermodynamics necessary to correctly ascertain CME propagation speeds, etc.

Scott W. McIntosh

2008-11-24T23:59:59.000Z

11

Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems  

E-Print Network [OSTI]

Roller Shade Systems and Daylight Responsive Dimming SystemsRoller Shade Systems and Daylight Responsive Dimming SystemsBerkeley, CA 94720 Abstract Daylight responsive dimming

Park, Byoung-Chul

2011-01-01T23:59:59.000Z

12

Issues, Models and Solutions for Triac Modulated Phase Dimming of LED Lamps  

E-Print Network [OSTI]

greater than incandescent lamps [1,2]. In fact, recent technological breakthroughs [3-7] in the high of LED lighting: An incandescent source produces 10 ­ 20 lumens/watt, while several manufacturers have? Incandescent bulbs primarily utilize phase modulating dimming through triac switches to control the power sent

Lehman, Brad

13

Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps.  

SciTech Connect (OSTI)

To date, all three reports in the retail lamps series have focused on basic performance parameters, such as lumen output, efficacy, and color quality. This report goes a step further, examining the photoelectric characteristics (i.e., dimming and flicker) of a subset of lamps from CALiPER Retails Lamps Study 3. Specifically, this report focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers. The results demonstrate notable variation across the various lamps, but little variation between the four dimmers. Overall, the LED lamps: ~tended to have higher relative light output compared to the incandescent and halogen benchmark at the same dimmer output signal (RMS voltage). The lamps dimming curves (i.e., the relationship between control signal and relative light output) ranged from linear to very similar to the square-law curve typical of an incandescent lamp. ~generally exhibited symmetrical behaviorthe same dimming curvewhen measured proceeding from maximum to minimum or minimum to maximum control signal. ~mostly dimmed below 10% of full light output, with some exceptions for specific lamp and dimmer combinations ~exhibited a range of flicker characteristics, with many comparing favorably to the level typical of a magnetically-ballasted fluorescent lamp through at least a majority of the dimming range. ~ always exceeded the relative (normalized) efficacy over the dimming range of the benchmark lamps, which rapidly decline in efficacy when they are dimmed. This report generally does not attempt to rank the performance of one product compared to another, but instead focuses on the collective performance of the group versus conventional incandescent or halogen lamps, the performance of which is likely to be the baseline for a majority of consumers. Undoubtedly, some LED lamps perform betteror more similar to conventional lampsthan others. Some perform desirably for one characteristic, but not others. Consumers (and specifiers) may have a hard time distinguishing better-performing lamps from one another; at this time, physical experimentation is likely the best evaluation tool.

Royer, Michael P.; Poplawski, Michael E.; Brown, Charles C.

2014-12-14T23:59:59.000Z

14

Efficient Driver for Dimmable White LED Lighting.  

E-Print Network [OSTI]

??A high efficiency driver circuit is proposed for Light Emitting Diode (LED) lamps with dimming feature. The current regulation is accomplished by processing partial power (more)

Yang, Wen-ching

2011-01-01T23:59:59.000Z

15

Lumental : web-based tunable lighting control  

E-Print Network [OSTI]

Dynamically adjusting the light spectrum of spectrum-tunable light fixtures promises significant energy savings over binary or incremental dimming control. To enable this level of controllability, lighting must evolve from ...

Hall, Harrison King

2012-01-01T23:59:59.000Z

16

Wireless Networked Lighting Systems for Optimizing Energy Savings and User Satisfaction  

E-Print Network [OSTI]

Buildings consume more than one-third of the total primary energy in the US, and about two-thirds of the building primary energy use attributed to electricity [1]. Lighting accounts for 30% of the primary energy the overall energy consumption while constrained by possibly conflicting lighting preferences of the occupants

Agogino, Alice M.

17

Metameric Modulation for Diffuse Visible Light Communications with Constant Ambient Lighting  

E-Print Network [OSTI]

untapped for wireless communications. Advancements in light emitting diode (LED) technology are making

Little, Thomas

18

The Post-Eruptive Evolution of a Coronal Dimming  

E-Print Network [OSTI]

We discuss the post-eruptive evolution of a "coronal dimming" based on observations of the EUV corona from the Solar and Heliospheric Observatory and the Transition Region and Coronal Explorer. This discussion highlights the roles played by magnetoconvection-driven magnetic reconnection and the global magnetic environment of the plasma in the "filling" and apparent motion of the region following the eruption of a coronal mass ejection (CME). A crucial element in our understanding of the dimming region evolution is developed by monitoring the disappearance and reappearance of bright TRACE "moss" around the active region giving rise to the CME. We interpret the change in the TRACE moss as a proxy of the changing coronal magnetic field topology behind the CME front. We infer that the change in global magnetic topology also results in a shift of energy balance in the process responsible for the production of the moss emission while the coronal magnetic topology evolves from closed, to open and back to closed again because, following the eruption, the moss reforms around the active region in almost exactly its pre-event configuration. As a result of the moss evolution, combining our discussion with recent spectroscopic results of an equatorial coronal hole, we suggest that the interchangeable use of the term "transient coronal hole" to describe a coronal dimming is more than just a simple coincidence.

Scott W. McIntosh; Robert J. Leamon; Alisdair R. Davey; Meredith J. Wills-Davey

2007-01-11T23:59:59.000Z

19

Mechanisms of growth inhibition induced by methylene-substituted and ring-substituted dims in breast cancer cells  

E-Print Network [OSTI]

-MB-231 and MDA-MB-453 breast cancer cell growth was inhibited after treatment with a novel series of methylenesubstituted DIMs (C-DIMs), namely 1,1-bis(3-indolyl)-1-(p-substitutedphenyl) methanes containing trifluoromethyl (DIM-C-pPhCF3), t-butyl (DIM...

Vanderlaag, Kathryn Elisabeth

2009-05-15T23:59:59.000Z

20

Invited paper for the 2001 IESNA National Conference Daylighting, Dimming, and the Electricity Crisis in California  

E-Print Network [OSTI]

, and the Electricity Crisis in California Francis Rubinstein, Danielle Neils and Nesrin Colak Ernest Orlando Lawrence Contract No. DE-AC03-76SF00098. #12;Daylighting, Dimming and California Electricity Crisis Rubinstein, Neils & Colak Daylighting, Dimming, and the Electricity Crisis in California Francis Rubinstein

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

SPECTROSCOPIC ANALYSIS OF AN EIT WAVE/DIMMING OBSERVED BY HINODE/EIS  

SciTech Connect (OSTI)

EUV Imaging Telescope (EIT) waves are a wavelike phenomenon propagating outward from the coronal mass ejection source region, with expanding dimmings following behind. We present a spectroscopic study of an EIT wave/dimming event observed by the Hinode/Extreme-ultraviolet Imaging Spectrometer. Although the identification of the wave front is somewhat affected by the pre-existing loop structures, the expanding dimming is well defined. We investigate the line intensity, width, and Doppler velocity for four EUV lines. In addition to the significant blueshift implying plasma outflows in the dimming region as revealed in previous studies, we find that the widths of all four spectral lines increase at the outer edge of the dimmings. We illustrate that this feature can be well explained by the field line stretching model, which claims that EIT waves are apparently moving brightenings that are generated by the successive stretching of the closed field lines.

Chen, F.; Ding, M. D.; Chen, P. F., E-mail: dmd@nju.edu.c [Department of Astronomy, Nanjing University, Nanjing 210093 (China)

2010-09-10T23:59:59.000Z

22

Photosensors and associated control systems can dim or raise fluorescent  

E-Print Network [OSTI]

Seaman mseaman@energy.state.ca.us Architectural Energy Corporation www.archenergy.com/lrp Judie Porter to reduce lighting energy use in classrooms by 60 percent, reduce lighting demand in controlled spaces by 40 photosensor design accurately senses daylight availability, cutting electric light usage 40­60 percent or more

23

3dim: Compact and Low Power Time-of-Flight Sensor for 3D Capture Using Parametric Signal Processing  

E-Print Network [OSTI]

Goyal1 1Massachusetts Institute of Technology 23dim Tech, Inc. 3Princeton Optronics Abstract We impulse responses. As opposed to estimating one depth value per pixel in a conventional TOF sensor, 3dim increasingly integrated in consumer electronic devices to enable gesture-based user interfaces. The demand

Goyal, Vivek K

24

Impact of global dimming and brightening on global warming Martin Wild,1  

E-Print Network [OSTI]

Impact of global dimming and brightening on global warming Martin Wild,1 Atsumu Ohmura,1 and Knut February 2007. [1] Speculations on the impact of variations in surface solar radiation on global warming was responsible for the observed warming. To disentangle surface solar and greenhouse influences on global warming

Fischlin, Andreas

25

ONE-DIMENSIONAL MODELING FOR TEMPERATURE-DEPENDENT UPFLOW IN THE DIMMING REGION OBSERVED BY HINODE/EUV IMAGING SPECTROMETER  

SciTech Connect (OSTI)

We previously found a temperature-dependent upflow in the dimming region following a coronal mass ejection observed by the Hinode EUV Imaging Spectrometer (EIS). In this paper, we reanalyzed the observations along with previous work on this event and provided boundary conditions for modeling. We found that the intensity in the dimming region dramatically drops within 30 minutes from the flare onset, and the dimming region reaches the equilibrium stage after {approx}1 hr. The temperature-dependent upflows were observed during the equilibrium stage by EIS. The cross-sectional area of the flux tube in the dimming region does not appear to expand significantly. From the observational constraints, we reconstructed the temperature-dependent upflow by using a new method that considers the mass and momentum conservation law and demonstrated the height variation of plasma conditions in the dimming region. We found that a super-radial expansion of the cross-sectional area is required to satisfy the mass conservation and momentum equations. There is a steep temperature and velocity gradient of around 7 Mm from the solar surface. This result may suggest that the strong heating occurred above 7 Mm from the solar surface in the dimming region. We also showed that the ionization equilibrium assumption in the dimming region is violated, especially in the higher temperature range.

Imada, S.; Shimizu, T. [Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara-shi, Kanagawa 252-5210 (Japan); Hara, H.; Watanabe, T. [National Astronomical Observatory of Japan, 2-21-1 Osawa, Mitaka-shi, Tokyo 181-8588 (Japan); Murakami, I. [National Institute for Fusion Science, 322-6 Oroshi-cho, Toki, Gifu 509-5292 (Japan); Harra, L. K. [UCL-Mullard Space Science Laboratory, Holmbury St Mary, Dorking, Surrey, RH5 6NT (United Kingdom); Zweibel, E. G. [Department of Astronomy, University of Wisconsin-Madison, 475 N Charter Street, Madison, WI 53706 (United States)

2011-12-10T23:59:59.000Z

26

Dimming LEDs with Phase-Cut Dimmers: The Specifier's Process for Maximizing Success  

SciTech Connect (OSTI)

This report reviews how phase-cut dimmers work, how LEDs differ from the incandescent lamps that the dimmers were historically designed to control, and how these differences can lead to complications when trying to dim LEDs. Compatibility between a specific LED source and a specific phase-cut dimmer is often unknown and difficult to assess, and ensuring compatibility adds complexity to the design, specification, bidding, and construction observation phases for new buildings and major remodel projects. To maximize project success, this report provides both general guidance and step-by-step procedures for designing phase-controlled LED dimming on both new and existing projects, as well as real-world examples of how to use those procedures.

Miller, Naomi J.; Poplawski, Michael E.

2013-10-01T23:59:59.000Z

27

Energy Harvesting Wireless Communications  

E-Print Network [OSTI]

perspective what should we care about for energy efficient design of cellular/conventional wireless networks

Ulukus, Sennur

28

EMERGING DIMMINGS OF ACTIVE REGIONS OBSERVED BY THE SOLAR DYNAMICS OBSERVATORY  

SciTech Connect (OSTI)

Using the observations from the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, we statistically investigate the emerging dimmings (EDs) of 24 isolated active regions (IARs) from 2010 June to 2011 May. All the IARs show EDs in lower-temperature lines (e.g., 171 A) at their early emerging stages. Meanwhile, in higher temperature lines (e.g., 211 A), the ED regions brighten continuously. There are two types of EDs: fan-shaped and halo-shaped. There are 19 fan-shaped EDs and 5 halo-shaped ones. The EDs appear to be delayed by several to more than ten hours relative to the first emergence of the IARs. The shortest delay is 3.6 hr and the longest is 19.0 hr. The EDs last from 3.3 hr to 14.2 hr, with a mean duration of 8.3 hr. Before the appearance of the EDs, the emergence rate of the magnetic flux of the IARs is between 1.2 Multiplication-Sign 10{sup 19} Mx hr{sup -1} to 1.4 Multiplication-Sign 10{sup 20} Mx hr{sup -1}. The larger the emergence rate is, the shorter the delay time is. While the dimmings appear, the magnetic flux of the IARs ranges from 8.8 Multiplication-Sign 10{sup 19} Mx to 1.3 Multiplication-Sign 10{sup 21} Mx. These observations imply that the reconfiguration of the coronal magnetic fields due to reconnection between the newly emerging flux and the surrounding existing fields results in a new thermal distribution which leads to a dimming for the cooler channel (171 A) and brightening in the warmer channels.

Zhang Jun; Yang Shuhong [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Liu Yang; Sun Xudong, E-mail: zjun@nao.cas.cn, E-mail: shuhongyang@nao.cas.cn, E-mail: yliu@sun.stanford.edu, E-mail: xudong@sun.stanford.edu [W. W. Hansen Experimental Physics Laboratory, Stanford University, Stanford, CA 94305-4085 (United States)

2012-12-01T23:59:59.000Z

29

2003: Energy performance of daylight-linked automatic lighting control systems in large atrium spaces: report on two field-monitored case studies  

E-Print Network [OSTI]

This paper presents the field-measured energy performance of two common types of daylight-linked lighting control systems, continuous dimming and automatic on/off installed in two existing large atrium spaces located in Canada. The daylighting performance was evaluated based on the daylight contribution to the indoor illuminance and the amount of electrical lighting displaced by daylighting via the daylight-linked lighting control systems. Measured daylighting contribution to the space indicates that significant lighting energy savings can be achieved in atrium spaces if the daylight-linked lighting control system is appropriately selected, installed and commissioned throughout its existence. Results extrapolated from measurements collected during summer and winter indicate that as installed, the continuous dimming lighting control system provides 46% annual savings in electrical lighting consumption, while the automatic on/off saves between 11-17% in lighting energy. These savings account for 68% of the lighting energy consumed during main occupancy for the continuous dimming system, and 31.5% for the automatic on/off. Operation irregularities such as a reduced dimming linearity and an incorrect adjustment of the phases of the dimming control system, as well as the inadequate location of the photocell controlling the automatic on/off lighting system, the improper maintenance of the skylight during winter and the oversizing of the lighting system reduced the energy efficiency of the lighting control systems by 30-65%.

M. R. Galasiu; Morad R. Atif; Anca D. Galasiu

30

Investigation of optical wireless systems for indoor broadband networks  

E-Print Network [OSTI]

in the light emitting diodes (LEDs) of a visible light communication (VLC) system are investigated. Keywords emitting diodes (LEDs) emitting in the visible spectral range has recently gained increasing attention been reported covering bit rates up to 50 Mb/s [5]. Optical wireless communications with (light

Kouroupetroglou, Georgios

31

Wireless Urban Sensing Systems  

E-Print Network [OSTI]

enabled by personal wireless sensing devices introduces newpublic or personal servers, but also on mobile devices. For

2006-01-01T23:59:59.000Z

32

Research and Development of a New Field Enhanced Low Temperature Thermionic Cathode that Enables Fluorescent Dimming and Loan Shedding without Auxiliary Cathode Heating  

SciTech Connect (OSTI)

This is the final report for project entitled 'Research and development of a new field enhanced low temperature thermionic cathode that enables fluorescent dimming and load shedding without auxiliary cathode heating', under Agreement Number: DE-FC26-04NT-42329. Under this project, a highly efficient CNT based thermionic cathode was demonstrated. This cathode is capable of emitting electron at a current density two order of magnitude stronger then a typical fluorescent cathode at same temperatures, or capable of emitting at same current density but at temperature about 300 C lower than that of a fluorescent cathode. Detailed fabrication techniques were developed including CVD growth of CNTs and sputter deposition of oxide thin films on CNTs. These are mature technologies that have been widely used in industry for large scale materials processing and device fabrications, thus, with further development work, the techniques developed in this project can be scaled-up in manufacturing environment. The prototype cathodes developed in this project were tested in lighting plasma discharge environment. In many cases, they not only lit and sustain the plasma, but also out perform the fluorescent cathodes in key parameters such like cathode fall voltages. More work will be needed to further evaluate more detailed and longer term performance of the prototype cathode in lighting plasma.

Feng Jin

2009-01-07T23:59:59.000Z

33

FAST EXTREME-ULTRAVIOLET DIMMING ASSOCIATED WITH A CORONAL JET SEEN IN MULTI-WAVELENGTH AND STEREOSCOPIC OBSERVATIONS  

SciTech Connect (OSTI)

We have investigated a coronal jet observed near the limb on 2010 June 27 by the Hinode/X-Ray Telescope (XRT), EUV Imaging Spectrograph (EIS), and Solar Optical Telescope (SOT), and by the Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA), and on the disk by STEREO-A/EUVI. From EUV (AIA and EIS) and soft X-ray (XRT) images we have identified both cool and hot jets. There was a small loop eruption seen in Ca II images of the SOT before the jet eruption. We found that the hot jet preceded its associated cool jet by about 2 minutes. The cool jet showed helical-like structures during the rising period which was supported by the spectroscopic analysis of the jet's emission. The STEREO observation, which enabled us to observe the jet projected against the disk, showed dimming at 195 A along a large loop connected to the jet. We measured a propagation speed of {approx}800 km s{sup -1} for the dimming front. This is comparable to the Alfven speed in the loop computed from a magnetic field extrapolation of the photospheric field measured five days earlier by the SDO/Helioseismic and Magnetic Imager, and the loop densities obtained from EIS Fe XIV {lambda}264.79/274.20 line ratios. We interpret the dimming as indicating the presence of Alfvenic waves initiated by reconnection in the upper chromosphere.

Lee, K.-S.; Moon, Y.-J.; Lee, Jin-Yi [Department of Astronomy and Space Science, Kyung Hee University, Yongin 446-701 (Korea, Republic of)] [Department of Astronomy and Space Science, Kyung Hee University, Yongin 446-701 (Korea, Republic of); Innes, D. E. [Max Plank Institute for Solar System Research, D-37191 Katlenburg-Lindau (Germany)] [Max Plank Institute for Solar System Research, D-37191 Katlenburg-Lindau (Germany); Shibata, K. [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan)] [Kwasan and Hida Observatories, Kyoto University, Yamashina, Kyoto 607-8471 (Japan); Park, Y.-D., E-mail: lksun@khu.ac.kr [Solar and Space Weather Research Group, Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of)

2013-03-20T23:59:59.000Z

34

Integrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks  

E-Print Network [OSTI]

by connecting many light-weight personal devices such as PDAs, mobile phones, and media players. UWB (Ultra WideIntegrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks and in a piconet level as well as power saving, which is desired for wireless personal area network systems. 1

Lee, Tae-Jin

35

Saving lighting energy with a ''wireless'' controller  

SciTech Connect (OSTI)

Describes the use of an automatic control system designated the Central Control System (CCS), which requires no wiring to be run between controller and control points. The controller is simply plugged into any wall receptacle; it uses exising building power wiring to transmit command signals to the receiver control modules at the control points. The command pulses from the controller are sent through to the receiver modules when the 60 Hz power sine wave crosses the zero axis. Three types of controllers are available: the basic central programmable controller, a miniature desktop unit for limited local control, and a portable unit that security guards or janitorial personnel can use to override the central controller. Installed for less than $19,000, the new system is delivering approximately $50,000 in annual pretax savings.

Beal, J.D.

1983-05-12T23:59:59.000Z

36

Low-Rate Wireless Personal Area Network Coordinator Design and Implementation  

E-Print Network [OSTI]

not been a single exception. My first electric motor, the vacuum wireless light, my turbine engine and many other devices have all been developed in exactly this way. -Nikola Tesla #12;i Abstract This thesis

Zilic, Zeljko

37

Network coded wireless architecture  

E-Print Network [OSTI]

Wireless mesh networks promise cheap Internet access, easy deployment, and extended range. In their current form, however, these networks suffer from both limited throughput and low reliability; hence they cannot meet the ...

Katti, Sachin Rajsekhar

2008-01-01T23:59:59.000Z

38

Chapters 6 & 8 Wireless Networks  

E-Print Network [OSTI]

for sending packets between wired network and wireless host(s) in its "area" e.g., cell towers, 802.11 access protocol coordinates link access various data rates, transmission distance Elements of a wireless network

Lu, Enyue "Annie"

39

Video transmission over wireless networks  

E-Print Network [OSTI]

Compressed video bitstream transmissions over wireless networks are addressed in this work. We first consider error control and power allocation for transmitting wireless video over CDMA networks in conjunction with multiuser detection. We map a...

Zhao, Shengjie

2005-08-29T23:59:59.000Z

40

Reconfigurable Wireless Interface for Networking Sensors (ReWINS)  

E-Print Network [OSTI]

, Rajit Gadh {harish, bsp, gadh}@wireless.ucla.edu Wireless Internet for the Mobile Enterprise Consortium

California at Los Angeles, University of

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

The Effect of Personal Lighting Controls on Energy use and Occuplant Weel-Being in Offices  

E-Print Network [OSTI]

?yrs m ? Quasi-realistic laboratory study a l i s m R e a ? Field study Prior NRC Research ? First laboratory experiment Direct parabolic (ceiling perimeter) Direct parabolic (ceiling centre) Task light (undershelf) Indirect... sources, 40% from indirect ? Supported by more recent studiesSupporte or ecen studie Light Right Albany Righ Experiments EE xperim e BC 1 - Parabolic Louvers Best Practice @ 600 lx Best Practice + Switchable Control Dimming Control ent #1...

Veitch, J. A.; Newsham, G. R.; Mancini, S.; Arsenault, C.

2013-01-01T23:59:59.000Z

42

In: Speech Communication 26(4), pp. 259-282 (December 1998) URL: http://www.dcs.shef.ac.uk/~miguel/papers/dim red epg.html  

E-Print Network [OSTI]

://www.dcs.shef.ac.uk/~miguel/papers/dim red epg.html Dimensionality Reduction of Electropalatographic Data Using Latent Variable Models Miguel: electropalatography (EPG), articulatory modelling, data reduction methods, dimensionality reduction, latent variable of finding such a dimensionality reduction mapping, not from a physical point of view, but from a machine

Carreira-Perpiñán, Miguel Á.

43

Insecurity of Wireless Networks  

SciTech Connect (OSTI)

Wireless is a powerful core technology enabling our global digital infrastructure. Wi-Fi networks are susceptible to attacks on Wired Equivalency Privacy, Wi-Fi Protected Access (WPA), and WPA2. These attack signatures can be profiled into a system that defends against such attacks on the basis of their inherent characteristics. Wi-Fi is the standard protocol for wireless networks used extensively in US critical infrastructures. Since the Wired Equivalency Privacy (WEP) security protocol was broken, the Wi-Fi Protected Access (WPA) protocol has been considered the secure alternative compatible with hardware developed for WEP. However, in November 2008, researchers developed an attack on WPA, allowing forgery of Address Resolution Protocol (ARP) packets. Subsequent enhancements have enabled ARP poisoning, cryptosystem denial of service, and man-in-the-middle attacks. Open source systems and methods (OSSM) have long been used to secure networks against such attacks. This article reviews OSSMs and the results of experimental attacks on WPA. These experiments re-created current attacks in a laboratory setting, recording both wired and wireless traffic. The article discusses methods of intrusion detection and prevention in the context of cyber physical protection of critical Internet infrastructure. The basis for this research is a specialized (and undoubtedly incomplete) taxonomy of Wi-Fi attacks and their adaptations to existing countermeasures and protocol revisions. Ultimately, this article aims to provide a clearer picture of how and why wireless protection protocols and encryption must achieve a more scientific basis for detecting and preventing such attacks.

Sheldon, Frederick T [ORNL; Weber, John Mark [Dynetics, Inc.; Yoo, Seong-Moo [University of Alabama, Huntsville; Pan, W. David [University of Alabama, Huntsville

2012-01-01T23:59:59.000Z

44

Display Size Wireless LAN  

E-Print Network [OSTI]

.) - Security sofware ­ESET Smart Security. No Reuse PC with English OS for this time. PC PC Code Image Brand PC PC Code Image Brand Model F008 Panasonic CF-W2 Pentium733 M 1.10GHz 256MB 40GB 12.1 inch 1.0kg System Memory HDD Display Size Weight OS Accessory LAN Wireless LAN Remarks PC PC Code Image Brand

Katsumoto, Shingo

45

Wireless LAN E001 Fujitsu  

E-Print Network [OSTI]

PC Code Image Brand Model 1 / 5 #12; CPU System Memory HDD Display Size Weight OS Accessory LAN Wireless LAN Remarks PC PC Code Image Brand Model E008 EPSON Endeavor NT331 Celeron M1.40GHz LAN Wireless LAN Remarks PC PC Code Image Brand Model E019 EPSON Endeavor NT331 Celeron M1.40GHz

Katsumoto, Shingo

46

Wireless LAN G001 Panasonic  

E-Print Network [OSTI]

Office MicrosoftOffice OSPC PC PC Code Image Brand Model All Reuse Note PC contain these software LAN Wireless LAN Remarks PC PC Code Image Brand Model G007 Panasonic CF-R7 Core2 Duo U7700 1 Accessory LAN Wireless LAN Remarks PC PC Code Image Brand Model G015 NEC Versa PC- VJ14MEFUW Celeron M

Katsumoto, Shingo

47

Proactive mobile wireless networks : an infrastructureless wireless network architecture for delay-sensitive applications  

E-Print Network [OSTI]

Infrastructureless wireless networks are an important class of wireless networks that is best suited for scenarios where there is temporary and localized telecommunication demand. Such networks consist of wireless devices ...

Dai, Lillian Lei, 1978-

2008-01-01T23:59:59.000Z

48

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture  

DOE Patents [OSTI]

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

McCown, Steven H. (Rigby, ID); Derr, Kurt W. (Idaho Falls, ID); Rohde, Kenneth W. (Idaho Falls, ID)

2012-05-08T23:59:59.000Z

49

Wireless passive radiation sensor  

DOE Patents [OSTI]

A novel measurement technique is employed using surface acoustic wave (SAW) devices, passive RF, and radiation-sensitive films to provide a wireless passive radiation sensor that requires no batteries, outside wiring, or regular maintenance. The sensor is small (<1 cm.sup.2), physically robust, and will operate unattended for decades. In addition, the sensor can be insensitive to measurement position and read distance due to a novel self-referencing technique eliminating the need to measure absolute responses that are dependent on RF transmitter location and power.

Pfeifer, Kent B; Rumpf, Arthur N; Yelton, William G; Limmer, Steven J

2013-12-03T23:59:59.000Z

50

Wireless Power Transfer  

SciTech Connect (OSTI)

Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

None

2013-07-22T23:59:59.000Z

51

Wireless Power Transfer  

ScienceCinema (OSTI)

Wireless Power Transfer is an innovative approach using magnetic resonance coupling of air core transformers designed for today's growing plug-in electric vehicle market. This technology can provide a convenient, safe and flexible means to charge electric vehicles under stationary and dynamic conditions. Plug-in Electric Vehicles (PEV) are burdened by the need for cable and plug charger, galvanic isolation of the on-board electronics, bulk and cost of this charger and the large energy storage system (ESS) packs needed. With a system where you have to physically plug in there are a number of occasions where the owner could very well forget to charge the vehicle. For stationary applications (like charging of a PHEV at home), ORNL's innovative wireless power transfer technology adds a convenience factor compared to actually plugging in which will mean that the vehicle will have a full charge every morning. Electric vehicle charging must be safe, compact and efficient in order to be convenient for customers. By reconfiguring the transformer and altering the resonance frequency, energy is transferred to the battery with lower energy losses and with fewer demands on the primary circuit by the rest of the transformer system. The ORNL discovery shows that sufficient power for the battery can be transferred from the primary to secondary circuits without significant energy losses if the operating frequency is set at 50% to 95% of the resonance frequency of the circuit. The electrical power is then transmitted to the chargeable battery, which is electrically coupled to the secondary circuit through the air core transformer. Some advantages include: Reduced energy losses during transfer of energy to the battery; A charge potential that is relatively unaffected by up to 25% misalignment of vehicle; and Other receiving components draw less power from the primary circuit. These advantages allow wireless power technology applications to expand at the workplace and beyond as the demand for EV rises. For vehicles that operate over a fixed route such as busses and shuttle vehicles, Wireless Power Transfer (WPT) means that a smaller battery pack can be used. In the traditional system, the battery pack is designed to accommodate the needs of the entire route or shift. With WPT the battery can be downsized because it can be charged when the vehicle stops on its route (a rental car shuttle bus, for example, can charge when it waits in the terminal and again when it waits at the rental car place. Thus the battery only needs enough charge to get to the next stop. This decrease in battery size means significant cost savings to electrify the vehicle. This technology enables efficient "opportunity charging stations" for predefined routes and planned stops reducing down time. Charging can occur in minutes. This improvement also eliminates the harmful emissions that occur in garages while buses are at idle during charging. In larger cities, dynamic charging offers an even greater impact utilizing existing infrastructure. As vehicles travel along busy freeways and interstate systems, wireless charging can occur while the vehicle is in motion. With this technology a vehicle essentially has unlimited electric range while using a relatively small battery pack. In-motion charging stations use vehicle sensors to alert the driver. Traveling at normal speeds, sensors establish in-motion charging. WPT transmit pads sequentially energize to the negotiated power level based on vehicle speed and its requested charging energy. Lower power when vehicle speed is slow and much higher power for faster moving vehicles. Vehicle to Infrastructure communications (V2I) coordinates WPT charging level according to on-board battery pack state-of-charge. V2I activates the roadway transmit pads placing them in standby mode and negotiates charging fee based on prevailing grid rate and vehicle energy demand. Dynamic charging would allow electricity to supply a very large fraction of the energy for the transportation sector and reduce greatly petroleum consump

None

2013-11-19T23:59:59.000Z

52

E-Print Network 3.0 - ad-hoc wireless sensor Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in wireless sensor networks The rapid progress of wireless communication and embedded micro-sensing MEMS... technologies has made wireless sensor networks possible. A wireless...

53

Embracing interference in wireless systems  

E-Print Network [OSTI]

The wireless medium is a shared resource. If nearby devices transmit at the same time, their signals interfere, resulting in a collision. In traditional networks, collisions cause the loss of the transmitted information. ...

Gollakota, Shyamnath (Shyamnath Venkata Satyasrisai)

2013-01-01T23:59:59.000Z

54

Universal Wireless Event Monitoring System  

E-Print Network [OSTI]

of remote query sensor systems have been investigated and various products have been developed for sensing different applications like water leakage, temperature, pressure, gas, diaper wetting etc [2-7]. The wireless link in these systems which is needed...-9]. One of the means of remote query sensing is the direct measurement of impedance of antenna which is wirelessly connected to the sensor. By measuring the impedance of the antenna using instrument like Impedance analyzer or network analyzer, the exact...

Yambem, Lamyanba

2012-10-19T23:59:59.000Z

55

Using Dimmable Lighting for Regulation Capacity and Non-Spinning Reserves in the Ancillary Services Market. A Feasibility Study.  

SciTech Connect (OSTI)

The objective of this Feasibility Study was to identify the potential of dimmable lighting for providing regulation capacity and contingency reserves if massively-deployed throughout the State. We found that one half of the total electric lighting load in the California commercial sector is bottled up in larger buildings that are greater an 50,000 square feet. Retrofitting large California buildings with dimmable lighting to enable fast DR lighting would require an investment of about $1.8 billion and a"fleet" of about 56 million dimming ballasts. By upgrading the existing installed base of lighting and controls (primarily in large commercial facilities) a substantial amount of ancillary services could be provided. Though not widely deployed, today's state-of-the art lighting systems, control systems and communication networks could be used for this application. The same lighting control equipment that is appropriate for fast DR is also appropriate for achieving energy efficiency with lighting on a daily basis. Thus fast DR can leverage the capabilities that are provided by a conventional dimming lighting control system. If dimmable lighting were massively deployed throughout large California buildings (because mandated by law, for example) dimmable lighting could realistically supply 380 MW of non-spinning reserve, 47percent of the total non-spinning reserves needed in 2007.

Rubinstein, Francis; Xiaolei, Li; Watson, David S.

2010-12-03T23:59:59.000Z

56

Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture  

DOE Patents [OSTI]

Communications device identification methods, communications methods, wireless communications readers, wireless communications systems, and articles of manufacture are described. In one aspect, a communications device identification method includes providing identification information regarding a group of wireless identification devices within a wireless communications range of a reader, using the provided identification information, selecting one of a plurality of different search procedures for identifying unidentified ones of the wireless identification devices within the wireless communications range, and identifying at least some of the unidentified ones of the wireless identification devices using the selected one of the search procedures.

Steele, Kerry D [Kennewick, WA; Anderson, Gordon A [Benton City, WA; Gilbert, Ronald W [Morgan Hill, CA

2011-02-01T23:59:59.000Z

57

Wireless Josephson amplifier  

SciTech Connect (OSTI)

Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables, and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hybrids, that are sources of spurious losses and impedance mismatches that limit measurement efficiency and amplifier tunability. We have developed a wireless architecture for these parametric amplifiers that eliminates superfluous microwave components and interconnects. This greatly simplifies their assembly and integration into experiments. We present an experimental realization of such a device operating in the 911?GHz band with about 100?MHz of amplitude gain-bandwidth product, on par with devices mounted in conventional sample holders. The simpler impedance environment presented to the amplifier also results in increased amplifier tunability.

Narla, A.; Sliwa, K. M.; Hatridge, M.; Shankar, S.; Frunzio, L.; Schoelkopf, R. J.; Devoret, M. H. [Department of Applied Physics, Yale University, New Haven, Connecticut 06511 (United States)

2014-06-09T23:59:59.000Z

58

Energy and quality scalable wireless communication  

E-Print Network [OSTI]

Nodes for emerging, high-density wireless networks will face the dual challenges of continuous, multi-year operation under diverse and challenging operating conditions. The wireless communication subsystem, a substantial ...

Min, Rex K. (Rex Kee), 1976-

2003-01-01T23:59:59.000Z

59

Wireless, automated monitoring for potential landslide hazards  

E-Print Network [OSTI]

This thesis describes research efforts toward the development of a wireless sensor node, which can be employed in durable and expandable wireless sensor networks for remote monitoring of soil conditions in areas conducive to slope stability failures...

Garich, Evan Andrew

2007-09-17T23:59:59.000Z

60

A miniature, implantable wireless neural stimulation system  

E-Print Network [OSTI]

In this thesis, I present the design of a wireless neural stimulation system. The system consists of an external transmitter, controllable through a computer interface, and a miniature, implantable wireless receiver and ...

Arfin, Scott K. (Scott Kenneth)

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Wireless device monitoring systems and monitoring devices, and associated methods  

DOE Patents [OSTI]

Wireless device monitoring systems and monitoring devices include a communications module for receiving wireless communications of a wireless device. Processing circuitry is coupled with the communications module and configured to process the wireless communications to determine whether the wireless device is authorized or unauthorized to be present at the monitored area based on identification information of the wireless device. Methods of monitoring for the presence and identity of wireless devices are also provided.

McCown, Steven H; Derr, Kurt W; Rohde, Kenneth W

2014-05-27T23:59:59.000Z

62

A MAC Layer Protocol for Priority-based Reliable Multicast in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

A MAC Layer Protocol for Priority-based Reliable Multicast in Wireless Ad Hoc Networks Murat Abstract RTS-CTS handshake based protocols achieve "reliable unicast" by eliminating the hidden node. Here we present a simple, light-weight, and self- stabilizing MAC protocol, namely Busy Elimination

Demirbas, Murat

63

Inverse Modeling Using a Wireless Sensor Network (WSN) for Personalized Daylight Harvesting  

E-Print Network [OSTI]

Inverse Modeling Using a Wireless Sensor Network (WSN) for Personalized Daylight Harvesting Ryan: predictive: daylight harvesting: piecewise linear regression: building energy efficiency Abstract: Smart light levels, discretized by sub-hourly sun angles. Applied on two days of daylight and ten days

Agogino, Alice M.

64

Dynamic Routing Trees with Energy Harvesting Constraints for Wireless Body Area Networks  

E-Print Network [OSTI]

for recharging batteries. Examples of energy harvesters include thermoelectric generators (body heat as an energy using computer simulations and models of energy harvesting. Energy sources of body heat, ambient lightDynamic Routing Trees with Energy Harvesting Constraints for Wireless Body Area Networks Nikhil

Tsouri, Gill

65

PERFORMANCE MODELING OF DAYLIGHT INTEGRATED PHOTOSENSOR- CONTROLLED LIGHTING SYSTEMS  

E-Print Network [OSTI]

Some building energy codes now require the incorporation of daylight into buildings and automatic photosensor-controlled switching or dimming of the electric lighting system in areas that receive daylight. This paper describes enhancements to the open-source Daysim daylight analysis software that permit users to model a photosensor control system as it will perform in a real space, considering the directional sensitivity of the photosensor, its mounting position, the space and daylight aperture geometry, window shading configuration; the electric lighting equipment and control zones; exterior obstructions; and site weather conditions. System output includes assessment of the daylight distribution in a space throughout the year, the photosensors ability to properly track the daylight and modify electric lighting system output, and the energy savings provided by the modeled control system. The application of daylight coefficients permits annual simulations to be conducted efficiently using hourly or finer weather data time increments. 1

S. Jain; R. R. Creasey; J. Himmelspach; K. P. White; M. Fu; Richard G. Mistrick

66

WIRELESS FOR A NUCLEAR FACILITY  

SciTech Connect (OSTI)

The introduction of wireless technology into a government site where nuclear material is processed and stored brings new meaning to the term ''harsh environment''. At SRNL, we are attempting to address not only the harsh RF and harsh physical environment common to industrial facilities, but also the ''harsh'' regulatory environment necessitated by the nature of the business at our site. We will discuss our concepts, processes, and expected outcomes in our attempts to surmount the roadblocks and reap the benefits of wireless in our ''factory''.

Shull, D; Joe Cordaro, J

2007-03-28T23:59:59.000Z

67

Commercial Lighting  

Broader source: Energy.gov [DOE]

Commercial lighting accounts for more than 20 percent of total commercial building energy use. The Energy Department works to reduce lighting energy use through research and deployment.

68

Physical layer-aware wireless link layer protocols  

E-Print Network [OSTI]

With wireless devices becoming ubiquitous, the problem of designing high performance and reliable wireless networks is of great importance today. Wireless links are characterized by a rapidly varying channel, requiring ...

Vutukuru, Mythili

2010-01-01T23:59:59.000Z

69

Green Radio Communications in a Heterogeneous Wireless Medium  

E-Print Network [OSTI]

1 Green Radio Communications in a Heterogeneous Wireless Medium Muhammad Ismail and Weihua Zhuang wireless communication networks. Such energy efficient solutions are referred to as green communication efficient wireless communication networks, due to environmental, financial, and quality

Zhuang, Weihua

70

Wireless@Virginia Tech Telecommunications  

E-Print Network [OSTI]

Wireless@Virginia Tech SWIM VLSI for Telecommunications The Institute for Critical Technology Whittemore Hall Bradley Department of Electrical and Computer Engineering Virginia Tech Blacksburg, VA 24061 units Power-line communications for vehicles, ships and airplanes Power conditioning circuits for energy

Beex, A. A. "Louis"

71

Energy efficiency in wireless networks  

E-Print Network [OSTI]

technique is to use power saving mode, which allows a node to power off its wireless network interface (or enter a doze state) to reduce energy consumption. The other is to use a technique that suitably varies transmission power to reduce energy consumption...

Jung, Eun-Sun

2005-11-01T23:59:59.000Z

72

Prototype system brings advantages of wireless technology to...  

National Nuclear Security Administration (NNSA)

Advantages of wireless, compared to a wired system, include lower cost, greater reliability and freedom of movement. Read more. Prototype system brings advantages of wireless...

73

Electromagnetic Interference in Wireless Communications: Behavioral-Level Simulation  

E-Print Network [OSTI]

Electromagnetic Interference in Wireless Communications: Behavioral-Level Simulation Approach in electromagnetic interference (EMI) modeling and simulation for modern and future wireless communication systems

Loyka, Sergey

74

ISA Approves Standard for Wireless Automation in Process Control...  

Energy Savers [EERE]

approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA...

75

SoftCast: One Video to Serve All Wireless Receivers  

E-Print Network [OSTI]

The main challenge in wireless video multicast is to scalably serve multiple receivers who have different channel characteristics. Current wireless transmission schemes, however, cannot support smooth degradation. Specifically, ...

Katabi, Dina

2009-02-07T23:59:59.000Z

76

Vehicle Technologies Office Merit Review 2014: Wireless Charging...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Wireless Charging Vehicle Technologies Office Merit Review 2014: Wireless Charging Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program...

77

EM's Laboratory Supports Testing Wireless Technology in Secure...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

wireless transmitter, alarms and a backup power source. SRNL contracted with General Dynamics to develop components for the ultra-secure short range wireless network. During the...

78

Wireless technology collects real-time information from oil and...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Wireless technology collects real-time information from oil and gas wells Wireless technology collects real-time information from oil and gas wells The patented system delivers...

79

DAINTREE NETWORKS PARTNERS WITH CLTC TO ADVANCE LIGHTING CONTROLS UC Davis' California Lighting Technology Center (CLTC) and Daintree team up to increase adoption with  

E-Print Network [OSTI]

- more - DAINTREE NETWORKS PARTNERS WITH CLTC TO ADVANCE LIGHTING CONTROLS UC Davis' California affiliate partnership with UC Davis' California Lighting Technology Center (CLTC) with the goal of advancing wireless smart building solutions for enterprise control and energy management, today announced its

California at Davis, University of

80

CCEC Seminar Wireless Sensors for SemiconductorWireless Sensors for Semiconductor  

E-Print Network [OSTI]

CCEC Seminar Wireless Sensors for SemiconductorWireless Sensors for Semiconductor Manufacturing perhaps. In this talk, we describe our efforts in developing a new class of wireless sensors for use in semiconductor manufacturing. These sensors are fully self-contained with on board power, communications

Akhmedov, Azer

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Power Sources for Wireless Sensor Abstract. Wireless sensor networks are poised to become a very significant  

E-Print Network [OSTI]

Power Sources for Wireless Sensor Networks Abstract. Wireless sensor networks are poised to become a very significant enabling technology in many sectors. Already a few very low power wireless sensor environment, alternative power sources must be employed. This paper reviews many potential power sources

Frechette, Luc G.

82

Wireless System Considerations When Implementing NERC Critical...  

Broader source: Energy.gov (indexed) [DOE]

American Electric Reliability Corporation (NERC) Critical Infrastructure Protection (CIP) Standards (CIP-002 through CIP-009). The increased use of wireless technologies and...

83

Wireless Demand Response Controls for HVAC Systems  

E-Print Network [OSTI]

Response Controls for HVAC Systems Clifford Federspiel,tests. Figure 5: Specific HVAC electric power consumptioncontrol, demand response, HVAC, wireless Executive Summary

Federspiel, Clifford

2010-01-01T23:59:59.000Z

84

Resource management in heterogeneous wireless sensor networks  

E-Print Network [OSTI]

A. , 2002: Joint scheduling and power control for wirelesstransmit power control while scheduling wireless nodes ina control packet which contains the scheduling information

Regini, Edoardo

2009-01-01T23:59:59.000Z

85

E-Print Network 3.0 - adapting wireless technology Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

possible. A wireless sensor network normally comes a large area... in wireless sensor networks The rapid progress of wireless communication and embedded micro-sensing MEMS... ....

86

A Study of Energy-efficient Routing Supporting Coordinated Sleep Scheduling in Wireless Ad Hoc Networks.  

E-Print Network [OSTI]

??A wireless ad hoc network is a collection of wireless computing devices that self-configure to form a network independently of any fixed infrastructure. Many wireless (more)

Lou, Chong

2015-01-01T23:59:59.000Z

87

Wireless Network Capacity Management: A Real Options Approach  

E-Print Network [OSTI]

capacity, market price of risk, investment timing option 1 Introduction Wireless networks are now regarded

Forsyth, Peter A.

88

Wireless Sensor Networks for Structural Health Monitoring by Sukun Kim  

E-Print Network [OSTI]

Wireless Sensor Networks (WSN). The project is targeting a deployment on the Golden Gate Bridge. Ambient

California at Berkeley, University of

89

Student MAC Wireless Setup Guide Page 1 of 3  

E-Print Network [OSTI]

authentication occurs for an account with Administrator rights. Step 5. The student-curtin wireless network to the Curtin Wireless network: Wireless network names There are two wireless networks operating at Curtin University. One is available for staff and the other for students. When you configure your network connection

90

Staff MAC Wireless Setup Guide Page 1 of 3  

E-Print Network [OSTI]

for an account with Administrator rights. Step 5. The staff-curtin wireless network is now connected as indicated to the Curtin Wireless network: Wireless network names There are two wireless networks operating at Curtin University. One is available for staff and the other for students. When you configure your network connection

91

Wireless Industrial Monitoring and Control using a Smart Sensor Platform  

E-Print Network [OSTI]

. Prabhu and Rajit Gadh Wireless Internet for the Mobile Enterprise Consortium University of California

California at Los Angeles, University of

92

WIRELESS SENSORS EMBEDDED IN CONCRETE Amal Abbadi  

E-Print Network [OSTI]

WIRELESS SENSORS EMBEDDED IN CONCRETE Amal Abbadi 1 Phd Student, IRCICA, IEMN, Université Lille1 antennas with concrete are investigated at 860MHz. Simulations for different cases (different concrete are presented. KEYWORDS : Wireless sensor networks, concrete attenuation, embedded antenna, concrete

Paris-Sud XI, Université de

93

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS  

E-Print Network [OSTI]

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS Ljiljana Trajkovi Communication Networks;January 17, 2005 UBC Ljiljana Trajkovic, Simon Fraser University 2 Road map Tesla in 1890's First wireless;January 17, 2005 UBC Ljiljana Trajkovic, Simon Fraser University 4 Alternate currents Tesla left Edison

Trajkovic, Ljiljana

94

Wireless Sensor Networks Lecture 1: Introduction  

E-Print Network [OSTI]

Ptr, Vanderbilt #12;2009 Matt Welsh Harvard University 10 Solar panels for charging car battery (used by Free Harvard University 4 Wireless Technologies Comparison Data rate Complexity/power/cost CC1000 Bluetooth 802 University 5 Wireless Technologies Comparison Type Data rate Transmit pwr Range (approx) Cost 802.11b 11

Marti, Mikls

95

Monitoring Energy Consumption In Wireless Sensor Networks  

E-Print Network [OSTI]

Monitoring Energy Consumption In Wireless Sensor Networks Matthias Witt, Christoph Weyer, it may impair the ability of the sensor network to function. Therefore, minimizing energy consumption energy consumption in both standby and active modes is the basis of wireless networks. Energy preserving

Turau, Volker

96

a Wireless Sensor Network for Environmental Monitoring  

E-Print Network [OSTI]

transmitters #12;Sample sensors: #12;Sample sensors: PAR: Photosynthetically Active (solar) Radiation sensora Wireless Sensor Network for Environmental Monitoring a Wireless Sensor Network for Environmental technology: a truly self configurable, low-cost, maintenance-free, ad-hoc sensor network (not based on Zig

Gburzynski, Pawel

97

SECURITY FOR WIRELESS NETWORKS AND DEVICES  

E-Print Network [OSTI]

connections. Users of handheld devices such as personal digital assis tants (PDAs) and cell phones can synMarch 2003 SECURITY FOR WIRELESS NETWORKS AND DEVICES Shirley Radack, Editor, Computer Security organizations and users have found that wireless communications and devices are convenient, flexible, and easy

98

Manual authentication for wireless devices Christian Gehrmann  

E-Print Network [OSTI]

is to examine how these services might best be achieved for personal wireless-enabled devices. Using the terminology of Stajano [12], the problem is that of securely `imprinting' a personal device. That is, suppose a user has two wireless-enabled devices, e.g. a mobile phone and a Personal Digital Assistant (PDA

Mitchell, Chris

99

Smart Lighting Controller!! Smart lighting!  

E-Print Network [OSTI]

1! Smart Lighting Controller!! #12;2! Smart lighting! No need to spend energy lighting the room if://blogs.stthomas.edu/realestate/2011/01/24/residential-real-estate-professionals-how-do-you- develop feedback! There is a connection between the output and the input! Therefore forces inputs to same voltage

Anderson, Betty Lise

100

Commercial Lighting and LED Lighting Incentives  

Broader source: Energy.gov [DOE]

Incentives for energy efficient commercial lighting equipment as well as commercial LED lighting equipment are available to businesses under the Efficiency Vermont Lighting and LED Lighting...

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Lighting Renovations  

Broader source: Energy.gov [DOE]

When undertaking a lighting renovation in a Federal building, daylighting is the primary renewable energy opportunity. Photovoltaics (PV) also present an excellent opportunity. While this guide...

102

Cerenkov Light  

ScienceCinema (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2014-05-22T23:59:59.000Z

103

Cerenkov Light  

SciTech Connect (OSTI)

The bright blue glow from nuclear reactors is Cerenkov light. Karl Slifer describes how nuclear physicists can use this phenomenon to study the nucleus of the atom.

Slifer, Karl

2013-06-13T23:59:59.000Z

104

EM threat analysis for wireless systems.  

SciTech Connect (OSTI)

Modern digital radio systems are complex and must be carefully designed, especially when expected to operate in harsh propagation environments. The ability to accurately predict the effects of propagation on wireless radio performance could lead to more efficient radio designs as well as the ability to perform vulnerability analyses before and after system deployment. In this report, the authors--experts in electromagnetic (EM) modeling and wireless communication theory--describe the construction of a simulation environment that is capable of quantifying the effects of wireless propagation on the performance of digital communication.

Burkholder, R. J. (Ohio State University Electroscience Laboratory); Mariano, Robert J.; Schniter, P. (Ohio State University Electroscience Laboratory); Gupta, I. J. (Ohio State University Electroscience Laboratory)

2006-06-01T23:59:59.000Z

105

History of wireless power transmission  

SciTech Connect (OSTI)

The history of wireless power transmission at microwave frequencies is reviewed with emphasis upon the time period starting with the post World War II efforts to use the new microwave technology developed during the war. A nationally televised demonstration of a microwave powered helicopter at the Spencer Laboratory of the Raytheon Co., in 1964 was the result of these early efforts and broadly introduced the concept of wireless power transmission to scientific and engineering communities and to the public. Subsequent development efforts centered on improving the efficiency of the interconversion of d.c. and microwave power at the ends of the system to reach a demonstrated overall d.c. to d.c. system efficiency of 54% in 1974. The response to the requirements of applications such as the Solar Power Satellite and high altitude microwave powered aircraft have changed the direction of technology development and greatly expanded the technology base. Recent and current efforts are centered on examining the use of higher frequencies than the baseline 2.45 GHz, and in reducing the system costs at 2.45 GHz. 26 refs., 14 figs.

Brown, W.C. [Microwave Power Transmission Systems, Weston, MA (United States)] [Microwave Power Transmission Systems, Weston, MA (United States)

1996-12-31T23:59:59.000Z

106

Airborne wireless communication systems, airborne communication methods, and communication methods  

DOE Patents [OSTI]

An airborne wireless communication system includes circuitry configured to access information describing a configuration of a terrestrial wireless communication base station that has become disabled. The terrestrial base station is configured to implement wireless communication between wireless devices located within a geographical area and a network when the terrestrial base station is not disabled. The circuitry is further configured, based on the information, to configure the airborne station to have the configuration of the terrestrial base station. An airborne communication method includes answering a 911 call from a terrestrial cellular wireless phone using an airborne wireless communication system.

Deaton, Juan D. (Menan, ID); Schmitt, Michael J. (Idaho Falls, ID); Jones, Warren F. (Idaho Falls, ID)

2011-12-13T23:59:59.000Z

107

Routing in heterogeneous wireless ad hoc networks  

E-Print Network [OSTI]

Wireless ad hoc networks are used in several applications ranging from infrastructure monitoring to providing Internet connectivity to remote locations. A common assumption about these networks is that the devices that ...

Cheekiralla, Sivaram M. S. L., 1980-

2008-01-01T23:59:59.000Z

108

Epidemic Propagation In Overlaid Wireless Networks  

SciTech Connect (OSTI)

Witb tbe emergence of computer worms tbat can spread over air interfaces, wireless ad boc and sensor networks can be vulnerable to node compromises even if the deployed network is not connected to the backbone. Depending on the physical topology of the wireless network, even a single infected node can compromise the whole network. In this work, epidemic (e.g., worm) propagation in a static wireless network is studied, where a number of inCected mobile nodes are injected over the existing network. It is shown that the epidemic spread threshold and size depend on the physical topology of the underlying static wireless network as well as the mobility model employed by the infected mobile nodes. More specifically, results show that in a Cully-connected static wirelessnctwork targeted attacks are more effective, wbereas Cor a random topology random attacks can be sufficient to compromise the whole network.

Yanmaz, Evsen [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

109

Transmission Power Management for Wireless Health Applications  

E-Print Network [OSTI]

channel and energy efficient topology design for wirelessChris Blondia Design of Energy Efficient Topologies forEnergy-Efficient Signal Processing in Wearable Embedded Systems: An Optimal Feature Selection Approach, 2012 International Symposium on Low Power Electronics and Design,

Amini, Navid

2012-01-01T23:59:59.000Z

110

Iterative Collision Resolution in Wireless Networks  

E-Print Network [OSTI]

With the growing popularity of smart phones and tablets, development of multimedia applications is on the rise. Speedy transmission of this massive amount information is already pushing the limits of the capacity of wireless networks...

Stuckman, Katherine Christine

2013-03-29T23:59:59.000Z

111

Virtual infrastructure for wireless ad hoc networks  

E-Print Network [OSTI]

One of the most significant challenges introduced by ad hoc networks is coping with the unpredictable deployment, uncertain reliability, and erratic communication exhibited by emerging wireless networks and devices. The ...

Gilbert, Seth, 1976-

2007-01-01T23:59:59.000Z

112

Interference management in wireless cellular networks  

E-Print Network [OSTI]

In wireless networks, there is an ever-increasing demand for higher system throughputs, along with growing expectation for all users to be available to multimedia and Internet services. This is especially difficult to ...

Burchardt, Harald Peter

2013-07-01T23:59:59.000Z

113

New and Emerging Energy Efficient Wireless Protocols New and Emerging Energy Efficient Wireless  

E-Print Network [OSTI]

New and Emerging Energy Efficient Wireless Protocols 1 of 12 New and Emerging Energy Efficient energy efficient wireless protocols. The benefits of each protocol are given, and then the different ways of conserving energy are compared. Key Words- Energy efficient protocols, energy efficiency, energy aware, low

Jain, Raj

114

Low Frequency Wireless Communications Technology  

SciTech Connect (OSTI)

The purpose of this project was to demonstrate Nxegen's real-time wireless electricity monitoring and load management technologies in selected commercial, industrial, and municipal end user facilities. The purpose of which is to demonstrate the ability for Nxegen's technology to collect real-time electricity data to a central location (Nxegen's Network Operation Center "NOC"), aggregate customer load profiles into portfolios of profiles, and be able to dispatch load curtailment commands from the NOC to individual customer loads to demonstrate the ability to integrate demand resources into the overall electric utility system for the purpose of; (1) improving overall system reliability, (2) reducing wholesale electric generation prices (locational marginal prices "LMP"), and (3) reducing congestion costs in energy constrained areas (southwest Connecticut).

Bartone, Erik J; Carbone, John F

2004-01-27T23:59:59.000Z

115

CX-003546: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Harmonization of Zigbee, Bacnet and Dali in Wireless Dimming Lighting ControlCX(s) Applied: B5.1Date: 08/25/2010Location(s): Allentown, PennsylvaniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

116

CX-003545: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Harmonization of Zigbee, Bacnet and Dali in Wireless Dimming Lighting ControlCX(s) Applied: B5.1Date: 08/25/2010Location(s): Rochester, New YorkOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

117

CX-003547: Categorical Exclusion Determination  

Broader source: Energy.gov [DOE]

Harmonization of Zigbee, Bacnet and Dali in Wireless Dimming Lighting ControlCX(s) Applied: B5.1Date: 08/26/2010Location(s): Newark, CaliforniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

118

Combining daylighting, personal controls, and load shedding offers  

E-Print Network [OSTI]

Combining daylighting, personal controls, and load shedding offers enormous potential for reducing lighting system to respond to available daylight and demand response control · Allows building occupants--Consider the improved cost-effectiveness of wireless dimming to promote daylighting controls and load- shedding

119

Implementing a wireless base station for a sensor network  

E-Print Network [OSTI]

Using wireless sensor networks for monitoring infrastructure is a new trend in civil engineering. Compared with traditional ways to monitor infrastructure, wireless sensor networks are cheap, safe, and compact. However, ...

Song, Heewon, 1977-

2004-01-01T23:59:59.000Z

120

Direct Information Exchange in Wireless Networks: A Coding Perspective  

E-Print Network [OSTI]

the problem and reduce the stress on the wireless networks. One strategy to reduce the strain on the wireless networks is to utilize cooperative communication. The purpose of this thesis is to provide more efficient and reliable solutions for direct...

Ozgul, Damla

2011-10-21T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Design & implementation of a wireless sensor prototyping kit  

E-Print Network [OSTI]

In recent years, wireless sensor networks (WSN) has become an active area of research among computer scientists. In this work, JONA, a prototyping kit for wireless sensors, will be described. The intention of this kit is ...

Hope, Jamison Roger

2005-01-01T23:59:59.000Z

122

ENERGY EFFICIENCY AND SECURITY FOR MULTIHOP WIRELESS NETWORKS  

E-Print Network [OSTI]

ENERGY EFFICIENCY AND SECURITY FOR MULTIHOP WIRELESS NETWORKS BY MATTHEW JEFFERSON MILLER B over wireless channels demands confidentiality and integrity. In the energy efficiency domain that marginal gains in battery energy density necessitate energy efficient protocols. In the security realm

Vaidya, Nitin

123

Enhancing spectrum utilization through cooperation and cognition in wireless systems  

E-Print Network [OSTI]

We have seen a proliferation of wireless technologies and devices in recent years. The resulting explosion of wireless demand has put immense pressure on available spectrum. Improving spectrum utilization is therefore ...

Rahul, Hariharan Shankar, 1975-

2013-01-01T23:59:59.000Z

124

THE FUTURE OF THE WIRELESS ART by Nikola Tesla  

E-Print Network [OSTI]

THE FUTURE OF THE WIRELESS ART by Nikola Tesla WIRELESS TELEGRAPHY & TELEPHONY By Walter W. Massie & Charles R. Underhill, 1908, pp. 67-71. Mr. Nikola Tesla, in a recent interview by the authors

Cetiner, Bedri A.

125

Dynamic channel allocation in satellite and wireless networks  

E-Print Network [OSTI]

The objective of this thesis is to understand how to utilize wireless channels in a fair and efficient manner within a multi-users communication environment. We start by exploring the allocation of a single wireless downlink ...

Sun, Jun, 1975-

2007-01-01T23:59:59.000Z

126

On-Demand Based Wireless Resources Trading for Green Communications  

E-Print Network [OSTI]

The purpose of Green Communications is to reduce the energy consumption of the communication system as much as possible without compromising the quality of service (QoS) for users. An effective approach for Green Wireless Communications is On-Demand strategy, which scales power consumption with the volume and location of user demand. Applying the On-Demand Communications model, we propose a novel scheme -- Wireless Resource Trading, which characterizes the trading relationship among different wireless resources for a given number of performance metrics. According to wireless resource trading relationship, different wireless resources can be consumed for the same set of performance metrics. Therefore, to minimize the energy consumption for given performance metrics, we can trade the other type of wireless resources for the energy resource under the demanded performance metrics. Based on the wireless resource trading relationship, we derive the optimal energy-bandwidth and energy-time wireless resource trading ...

Cheng, Wenchi; Zhang, Hailin; Wang, Qiang

2011-01-01T23:59:59.000Z

127

Radio frequency circuits for wireless receiver front-ends  

E-Print Network [OSTI]

The beginning of the 21st century sees great development and demands on wireless communication technologies. Wireless technologies, either based on a cable replacement or on a networked environment, penetrate our daily life more rapidly than ever...

Xin, Chunyu

2005-11-01T23:59:59.000Z

128

X-by-wireless: a novel approach to vehicle control  

E-Print Network [OSTI]

As the cost of wireless devices approaches zero, it becomes more feasible to replace wires with wireless communication. Vehicle wiring harnesses are traditionally wired to communicate both power and information simultaneously, resulting in separate...

Hoelscher, David Louis

2009-05-15T23:59:59.000Z

129

Intrusion detection and monitoring for wireless networks.  

SciTech Connect (OSTI)

Wireless computer networks are increasing exponentially around the world. They are being implemented in both the unlicensed radio frequency (RF) spectrum (IEEE 802.11a/b/g) and the licensed spectrum (e.g., Firetide [1] and Motorola Canopy [2]). Wireless networks operating in the unlicensed spectrum are by far the most popular wireless computer networks in existence. The open (i.e., proprietary) nature of the IEEE 802.11 protocols and the availability of ''free'' RF spectrum have encouraged many producers of enterprise and common off-the-shelf (COTS) computer networking equipment to jump into the wireless arena. Competition between these companies has driven down the price of 802.11 wireless networking equipment and has improved user experiences with such equipment. The end result has been an increased adoption of the equipment by businesses and consumers, the establishment of the Wi-Fi Alliance [3], and widespread use of the Alliance's ''Wi-Fi'' moniker to describe these networks. Consumers use 802.11 equipment at home to reduce the burden of running wires in existing construction, facilitate the sharing of broadband Internet services with roommates or neighbors, and increase their range of ''connectedness''. Private businesses and government entities (at all levels) are deploying wireless networks to reduce wiring costs, increase employee mobility, enable non-employees to access the Internet, and create an added revenue stream to their existing business models (coffee houses, airports, hotels, etc.). Municipalities (Philadelphia; San Francisco; Grand Haven, MI) are deploying wireless networks so they can bring broadband Internet access to places lacking such access; offer limited-speed broadband access to impoverished communities; offer broadband in places, such as marinas and state parks, that are passed over by traditional broadband providers; and provide themselves with higher quality, more complete network coverage for use by emergency responders and other municipal agencies. In short, these Wi-Fi networks are being deployed everywhere. Much thought has been and is being put into evaluating cost-benefit analyses of wired vs. wireless networks and issues such as how to effectively cover an office building or municipality, how to efficiently manage a large network of wireless access points (APs), and how to save money by replacing an Internet service provider (ISP) with 802.11 technology. In comparison, very little thought and money are being focused on wireless security and monitoring for security purposes.

Thomas, Eric D.; Van Randwyk, Jamie A.; Lee, Erik J.; Stephano, Amanda (Indiana University); Tabriz, Parisa (University of Illinois at Urbana-Champaign); Pelon, Kristen (Cedarville University); McCoy, Damon (University of Colorado, Boulder); Lodato, Mark (Lafayette College); Hemingway, Franklin (University of New Mexico); Custer, Ryan P.; Averin, Dimitry (Polytechnic University); Franklin, Jason (Carnegie Mellon University); Kilman, Dominique Marie

2005-11-01T23:59:59.000Z

130

Power business Turning wireless power research into a top business  

E-Print Network [OSTI]

to replace conventional slip rings in the turbines with its wireless technology. "The challenge with wind-generation

Auckland, University of

131

Robust Timing Synchronization for AC-OFDM Based Optical Wireless Communications  

E-Print Network [OSTI]

Visible light communications (VLC) have recently attracted a growing interest and can be a potential solution to realize indoor wireless communication with high bandwidth capacity for RF-restricted environments such as airplanes and hospitals. Optical based orthogonal frequency division multiplexing (OFDM) systems have been proposed in the literature to combat multipath distortion and intersymbol interference (ISI) caused by multipath signal propagation. In this paper, we present a robust timing synchronization scheme suitable for asymmetrically clipped (AC) OFDM based optical intensity modulated direct detection (IM/DD) wireless systems. Our proposed method works perfectly for ACO-OFDM, Pulse amplitude modulated discrete multitone (PAM-DMT) and discrete Hartley transform (DHT) based optical OFDM systems. In contrast to existing OFDM timing synchronization methods which are either not suitable for AC OFDM techniques due to unipolar nature of output signal or perform poorly, our proposed method is suitable for...

Ranjha, Bilal A; Kavehrad, Mohsen; Deng, Peng

2015-01-01T23:59:59.000Z

132

Wireless Critical Process Control in oil and gas refinery plants  

E-Print Network [OSTI]

Wireless Critical Process Control in oil and gas refinery plants Stefano Savazzi1, Sergio Guardiano control in in- dustrial plants and oil/gas refineries. In contrast to wireline communication, wireless of an oil refinery is illustrated in Fig. 1: typical locations of wireless devices used for re- mote control

Savazzi, Stefano

133

Efficient Hybrid Key Agreement Protocol for Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Efficient Hybrid Key Agreement Protocol for Wireless Ad Hoc Networks Xiang-Yang Li Yu Wang Ophir important aspects in ad-hoc wireless networks. To ensure the security, several cryptography protocols must efficient when applied to wireless ad-hoc networks. In this paper, we propose a key agreement protocol

Wang, Yu

134

Brief Contributions________________________________________________________________________________ Topology Control of Ad Hoc Wireless  

E-Print Network [OSTI]

________________________________________________________________________________ Topology Control of Ad Hoc Wireless Networks for Energy Efficiency Maggie X. Cheng, Member, IEEE, Mihaela, Yinfeng Xu, and Ding-Zhu Du Abstract--In ad hoc wireless networks, to compute the transmission power-complete problem. In this paper, we consider the approximated solutions for the MENC problem in ad hoc wireless

Wang, Lusheng

135

Topology Reconstruction and Characterisation of Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Topology Reconstruction and Characterisation of Wireless Ad Hoc Networks Jon Arnold, Nigel Bean.sorell@adelaide.edu.au Abstract-- Wireless ad hoc networks provide a useful commu- nications infrastructure for the mobile Hoc Protocols, 802.11, Monitoring, Template Fitting, NS-2. I. INTRODUCTION Wireless Ad Hoc Networks

Roughan, Matthew

136

Information Commons Help Desk Internet / Connectivity Wireless Access  

E-Print Network [OSTI]

Information Commons Help Desk Internet / Connectivity » Wireless Access ID #1912 Connecting in the Username and Password fields.5. Info Commons Help Desk - Connecting to the UofT wireless netwo... http://help on this entry Info Commons Help Desk - Connecting to the UofT wireless netwo... http://help

Boonstra, Rudy

137

University of Maryland Baltimore (UMB) Wireless Security Standard  

E-Print Network [OSTI]

on building switch · All Access Points within the building to be contained in wireless VLAN Standard(sUniversity of Maryland Baltimore (UMB) Wireless Security Standard Effective Date: 04/14/03 Purpose This standard establishes a framework for ensuring that wireless networking technologies deployed within

Weber, David J.

138

Wireless  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

competitive exercises for national and international customers. And we support cybersecurity and control systems programs for the departments of Homeland Security, Energy and...

139

Vector analyzing powers for the (d,t) and (d, p3 sHe) reactions for light nuclei  

E-Print Network [OSTI]

15 14eV and few seasuresents above 20 Nev have been made. Due to this lack of experirrental data for light nuclei in this ~ range and due to the lack of DIM analysis for the data that does exist, the above reactions were studied. Tha {h, t) and (a...~ equation (2. 1. 17) that the calcu- (2. 1. 17) lation of r does not depend on detector efficiency or geometric factors. lf p p p then an aver- ge polarization pY is defined Yk Y0 by r ? 1 (r + 1) PY =- (2/3) (I/A ) 1 ? (g6) + . . . !2. 1. 18) r+ 1 4r...

Talley, Stephen Blake

2012-06-07T23:59:59.000Z

140

Light Computing  

E-Print Network [OSTI]

A configuration of light pulses is generated, together with emitters and receptors, that allows computing. The computing is extraordinarily high in number of flops per second, exceeding the capability of a quantum computer for a given size and coherence region. The emitters and receptors are based on the quantum diode, which can emit and detect individual photons with high accuracy.

Gordon Chalmers

2006-10-13T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Wireless Demand Response Controls for HVAC Systems  

SciTech Connect (OSTI)

The objectives of this scoping study were to develop and test control software and wireless hardware that could enable closed-loop, zone-temperature-based demand response in buildings that have either pneumatic controls or legacy digital controls that cannot be used as part of a demand response automation system. We designed a SOAP client that is compatible with the Demand Response Automation Server (DRAS) being used by the IOUs in California for their CPP program, design the DR control software, investigated the use of cellular routers for connecting to the DRAS, and tested the wireless DR system with an emulator running a calibrated model of a working building. The results show that the wireless DR system can shed approximately 1.5 Watts per design CFM on the design day in a hot, inland climate in California while keeping temperatures within the limits of ASHRAE Standard 55: Thermal Environmental Conditions for Human Occupancy.

Federspiel, Clifford

2009-06-30T23:59:59.000Z

142

ULTRA SECURE HIGH RELIABILITY WIRELESS RADIATION MONITOR  

SciTech Connect (OSTI)

Radiation monitoring in nuclear facilities is essential to safe operation of the equipment as well as protecting personnel. In specific, typical air monitoring of radioactive gases or particulate involves complex systems of valves, pumps, piping and electronics. The challenge is to measure a representative sample in areas that are radioactively contaminated. Running cables and piping to these locations is very expensive due to the containment requirements. Penetration into and out of an airborne or containment area is complex and costly. The process rooms are built with thick rebar-enforced concrete walls with glove box containment chambers inside. Figure 1 shows high temperature radiation resistance cabling entering the top of a typical glove box. In some case, the entire processing area must be contained in a 'hot cell' where the only access into the chamber is via manipulators. An example is shown in Figure 2. A short range wireless network provides an ideal communication link for transmitting the data from the radiation sensor to a 'clean area', or area absent of any radiation fields or radioactive contamination. Radiation monitoring systems that protect personnel and equipment must meet stringent codes and standards due to the consequences of failure. At first glance a wired system would seem more desirable. Concerns with wireless communication include latency, jamming, spoofing, man in the middle attacks, and hacking. The Department of Energy's Savannah River National Laboratory (SRNL) has developed a prototype wireless radiation air monitoring system that address many of the concerns with wireless and allows quick deployment in radiation and contamination areas. It is stand alone and only requires a standard 120 VAC, 60 Hz power source. It is designed to be mounted or portable. The wireless link uses a National Security Agency (NSA) Suite B compliant wireless network from Fortress Technologies that is considered robust enough to be used for classified data transmission in place of NSA Type 1 devices.

Cordaro, J.; Shull, D.; Farrar, M.; Reeves, G.

2011-08-03T23:59:59.000Z

143

LED Lighting in a Performing Arts Building at the University of Florida  

SciTech Connect (OSTI)

The U.S. DOE GATEWAY Demonstration Program supports demonstrations of high-performance solid-state lighting (SSL) products in order to develop empirical data and experience with the in-the-field applications of this advanced lighting technology. This report describes the process and results of the 2013 - 2014 GATEWAY demonstration of SSL technology in the Nadine McGuire Theatre and Dance Pavilion at the University of Florida, Gainesville, FL. The LED solutions combined with dimming controls utilized in four interior spaces - the Acting Studio, Dance Studio, Scene Shop, and Dressing Room - received high marks from instructors, students/performers, and reduced energy use in all cases. The report discusses in depth and detail of each project area including specifications, energy savings, and user observations. The report concludes with lessons learned during the demonstration.

Miller, Naomi J.; Kaye, Stan; Coleman, Patricia; Wilkerson, Andrea M.; Perrin, Tess E.; Sullivan, Gregory P.

2014-07-01T23:59:59.000Z

144

Consort: NodeConsort: Node--constrainedconstrained Opportunistic Routing in WirelessOpportunistic Routing in Wireless  

E-Print Network [OSTI]

on Mobile Computing, 2003. K. W. Choi, W. S. Jeon, and D. G. Jeong, "Efficient Load-Aware Routing Scheme. Sankar and Z. Liu, "Maximum Lifetime Routing in Wireless Ad- hoc Networks," IEEE INFOCOM'04. P. P. Pham

Xue, Guoliang

145

Tags, wireless communication systems, tag communication methods, and wireless communications methods  

DOE Patents [OSTI]

Tags, wireless communication systems, tag communication methods, and wireless communications methods are described. In one aspect, a tag includes a plurality of antennas configured to receive a plurality of first wireless communication signals comprising data from a reader, a plurality of rectifying circuits coupled with. respective individual ones of the antennas and configured to provide rectified signals corresponding to the first wireless communication signals, wherein the rectified signals are combined to produce a composite signal, an adaptive reference circuit configured to vary a reference signal responsive to the composite signal, a comparator coupled with the adaptive reference circuit and the rectifying circuits and configured to compare the composite signal with respect to the reference signal and to output the data responsive to the comparison, and processing circuitry configured to receive the data from the comparator and to process the data.

Scott; Jeff W. (Pasco, WA), Pratt; Richard M. (Richland, WA)

2006-09-12T23:59:59.000Z

146

Lighting Inventory Lighting Theatre and Drama  

E-Print Network [OSTI]

Lighting Inventory Lighting Theatre and Drama Description Totals R.Halls Wells- Metz Light ERS ETC SourceFour 25 25 50 degree ERS Strand Lighting 64 14 24 12 14 36 degree ERS ETC Source Four 15 15 36 degree ERS Strand Lighting 124 60 58 2 4 26 degree ERS ETC SourceFour 2 2 26 degree ERS Strand

Indiana University

147

Policy #3310 Allowance for Usage of Personal Mobile Devices and Wireless Service for University Business 1 OLD DOMINION UNIVERSITY  

E-Print Network [OSTI]

with a wireless service allowance must maintain an active wireless service contract for the life of the allowance

148

The Advantage of Highly Controlled Lighting for Offices and Commercial Buildings  

SciTech Connect (OSTI)

The paper presents results from pilot studies of new 'workstation-specific' luminaires that are designed to provide highly, efficient, customized lighting for open-office cubicles. Workstation specific luminaires have the following characteristics: (1) they provide separate, dimming control of the cubicle's 'ambient' and 'task' lighting components, (2) occupancy sensors and control photosensors are integrated into the fixture's design and operation, (3) luminaires can be networked using physical cabling, microcontrollers and a PC running control software. The energy savings, demand response capabilities and quality of light from the two WS luminaires were evaluated and compared to the performance of a static, low-ambient lighting system that is uncontrolled. Initial results from weeks of operation provide strong indication that WS luminaires can largely eliminate the unnecessary lighting of unoccupied cubicles while providing IESNA-required light levels when the cubicles are occupied. Because each cubicle's lighting is under occupant sensor control, the WS luminaires can capitalize on the fact cubicles are often unoccupied during normal working hours and reduce their energy use accordingly.

Rubinstein, Francis; Bolotov, Dmitriy; Levi, Mark; Powell, Kevin; Schwartz, Peter

2008-08-17T23:59:59.000Z

149

SUPERNOVA LIGHT CURVES POWERED BY FALLBACK ACCRETION  

SciTech Connect (OSTI)

Some fraction of the material ejected in a core collapse supernova explosion may remain bound to the compact remnant, and eventually turn around and fall back. We show that the late time ({approx}>days) power potentially associated with the accretion of this 'fallback' material could significantly affect the optical light curve, in some cases producing super-luminous or otherwise peculiar supernovae. We use spherically symmetric hydrodynamical models to estimate the accretion rate at late times for a range of progenitor masses and radii and explosion energies. The accretion rate onto the proto-neutron star or black hole decreases as M-dot {proportional_to}t{sup -5/3} at late times, but its normalization can be significantly enhanced at low explosion energies, in very massive stars, or if a strong reverse shock wave forms at the helium/hydrogen interface in the progenitor. If the resulting super-Eddington accretion drives an outflow which thermalizes in the outgoing ejecta, the supernova debris will be re-energized at a time when photons can diffuse out efficiently. The resulting light curves are different and more diverse than previous fallback supernova models which ignored the input of accretion power and produced short-lived, dim transients. The possible outcomes when fallback accretion power is significant include super-luminous ({approx}> 10{sup 44} erg s{sup -1}) Type II events of both short and long durations, as well as luminous Type I events from compact stars that may have experienced significant mass loss. Accretion power may unbind the remaining infalling material, causing a sudden decrease in the brightness of some long duration Type II events. This scenario may be relevant for explaining some of the recently discovered classes of peculiar and rare supernovae.

Dexter, Jason; Kasen, Daniel, E-mail: jdexter@berkeley.edu [Departments of Physics and Astronomy, University of California, Berkeley, CA 94720 (United States)

2013-07-20T23:59:59.000Z

150

E-Print Network 3.0 - ad hoc wireless Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wireless Search Powered by Explorit Topic List Advanced Search Sample search results for: ad hoc wireless Page: << < 1 2 3 4 5 > >> 1 Sum-of-Sinusoid channel models for wireless...

151

Ubiquitous communications for wireless personal area networks in a heterogeneous environment  

E-Print Network [OSTI]

The widespread use of wireless technologies has led to a tremendous development in wireless communication systems. Currently, an individual mobile user may carry multiple personal devices with multiple wireless interfaces, ...

Ma, Junkang

2010-06-28T23:59:59.000Z

152

Light Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLife a Light

153

Light' Darkness  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LawrenceEfeedstocks and the climateLifeLight to

154

Residential Lighting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared atEffectquestionnairesU.S. EnergyEnergy EfficiencyLighting

155

Multiagent coordination in microgrids via wireless networks  

E-Print Network [OSTI]

The future smart grid is expected to be an integration of intelligent microgrids featured by localized electricity generation, storage, and consumption. Wireless communication is a promising means to facilitate pervasive microgrid monitoring and control at a high flexibility and low deployment cost

Hao Liang; Atef Abdrabou

156

Applications of Industrial Wireless Sensor Milan Erdelj  

E-Print Network [OSTI]

...................................... 10 1.3.2.2 Hazard ........................................ 10 1.3.2.3 Security manuscript, published in "Industrial Wireless Sensor Networks: Applications, Protocols, and Standards CRC the problems of air, water (together with waste water) pollution, but covers the production material pollution

Paris-Sud XI, Université de

157

Software Update Recovery for Wireless Sensor Networks  

E-Print Network [OSTI]

mechanism that uses loss-of- control to provide high-reliability, low energy, software updates, includingSoftware Update Recovery for Wireless Sensor Networks Stephen Brown1 and Cormac J. Sreenan2 1 Laboratory, University College Cork, Ireland Abstract. Updating software over the network is important

Sreenan, Cormac J.

158

Wireless networks and mobile Ivan Stojmenovic  

E-Print Network [OSTI]

medium #12;Nikola Tesla 1856-1943 · The Serbian-American inventor, electrical engineer, and scientist for long distance transfers · Polyphase motors to use the current · Built the world's first hydroelectric plant at Niagara Falls 1895 #12;Nikola Tesla's inventions · Radio/wireless transmission · US Supreme

Stojmenovic, Ivan

159

TESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS  

E-Print Network [OSTI]

, at an AIEE meeting in New York, Tesla presented a lecture entitled "A New System of Alternate Current MotorsTESLA'S VISION OF THE WIRELESS GLOBAL COMMUNICATIONS Ljiljana Trajkovi Communication Networks;March 12, 2004 Kwantlen College Ljiljana Trajkovic, Simon Fraser University 2 Road map Tesla in 1890's

Trajkovic, Ljiljana

160

Radioactive Target Detection Using Wireless Sensor Network  

E-Print Network [OSTI]

. By using the physical law for nuclear radiation isotopes, this chapter proposes a statistical method for wireless sensor network data to detect and locate a hidden nuclear target in a large study area. The method shown that the proposed method is effective and efficient in detection and location of the nuclear

Zhang, Tonglin

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Energy Cooperation in Energy Harvesting Wireless Communications  

E-Print Network [OSTI]

Energy Cooperation in Energy Harvesting Wireless Communications Berk Gurakan1 , Omur Ozel1 , Jing node, a relay node and a destination node where the source and the relay can harvest energy from the nature. Energy required for communication arrives (is harvested) at the transmitter and an unlimited

Ulukus, Sennur

162

Wireless LAN Security April 24, 2007  

E-Print Network [OSTI]

, and in the carelessness and ignorance that exists at the user and corporate IT level. Cracking methods have become much more sophisticated and innovative with wireless. Cracking has become much easier and more accessible in that proprietary company information is exposed and now there could exist a link from one company to the other

Gao, Jie

163

Communication in automation, including networking and wireless  

E-Print Network [OSTI]

Communication in automation, including networking and wireless Nicholas Kottenstette and Panos J and networking in automation is given. Digital communication fundamentals are reviewed and networked control are presented. 1 Introduction 1.1 Why communication is necessary in automated systems Automated systems use

Antsaklis, Panos

164

Multiagent Coordination in Microgrids via Wireless Networks  

E-Print Network [OSTI]

is indispensable to incorporate more distributed energy resource (DER) units, such as the distributed generation load (or generator) or islanded as a self-sustained power system, which significantly simplifies by localized elec- tricity generation, storage, and consumption. Wireless communication is a promising means

Shen, Xuemin "Sherman"

165

Partially Controlled Deployment Strategies for Wireless Sensors  

E-Print Network [OSTI]

be formed and used in several application scenarios: smart home environ- ments, intrusion detection a certain set of grid-like strategies that reflect the (one- or two-dimensional) symmetry of the region years. By con- necting tiny, smart sensor nodes by means of wireless transceivers, large WSNs Part

Santi, Paolo

166

Wireless Link Scheduling under Physical Interference Model  

E-Print Network [OSTI]

approximation algorithms for link scheduling with or without power control. Index Terms--Link schedulingWireless Link Scheduling under Physical Interference Model Peng-Jun Wan, Ophir Frieder, Xiaohua Jia: jia@cs.cityu.edu.hk, csfyao@cityu.edu.hk Abstract--Link scheduling is a fundamental problem in multi

Jia, Xiaohua

167

Graphene-enabled Wireless Communication Networks  

E-Print Network [OSTI]

Graphene-enabled Wireless Communication Networks at the Nanoscale 1 Ignacio Llatser Nanonetworking;Graphene Honeycomb lattice of carbon atoms 2-dimensional material Discovered by A. K. Geim and K. S. Novoselov 9 Graphene G. Liu, W. Stillman, S. Rumyantsev, Q. Shao, M. Shur, A. A. Balandin, "Low

Politècnica de Catalunya, Universitat

168

Broadband Wireless Cognitive Radio-I  

E-Print Network [OSTI]

spectrum usage! #12;CMPE 591 - Broadband Wireless Networks 6 Cognitive Radio "Cognitive Radio" is the key portions of the spectrum is available and detect the presence of licensed users when a user operates in a licensed band. (Spectrum Sensing) 2. Select the best available channel. (Spectrum Decision) 3. Coordinate

Tuðcu, Tuna

169

Green Wireless Cognition: Future Efficient Spectrum Sharing  

E-Print Network [OSTI]

Underwater Vehicles The project aims to develop an unmanned fully autonomous under water vehicles (UWV Spectrum Wireless Sensor in Underwater Networks * Bell's Law of Computer Classes formulated by Gordon Bell the challenges of underwater communications by an integration of sensor and multihop networks. Human

Shihada, Basem

170

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Light Water Reactor Sustainability Program ACCOMPLISHMENTS REPORT 2013 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

171

Light Water Reactor Sustainability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4 Light Water Reactor Sustainability ACCOMPLISHMENTS REPORT 2014 Accomplishments Report | Light Water Reactor Sustainability 2 T he mission of the Light Water Reactor...

172

Improving spectrum sensing and multiuser cooperation in wireless cognitive radio networks.  

E-Print Network [OSTI]

??Nowadays wireless spectrum resource is more and more scarce because most wireless spectrum bands have been allocated to licensed users, however measurements show that many (more)

Song, Chengqi

2010-01-01T23:59:59.000Z

173

Final Scientific Report - Wireless and Sensing Solutions Advancing Industrial Efficiency  

SciTech Connect (OSTI)

The project team's goal for the Wireless and Sensing Solution Advancing Industrial Efficiency award (DE-FC36-04GO14002) was to develop, demonstrate, and test a number of leading edge technologies that could enable the emergence of wireless sensor and sampling systems for the industrial market space. This effort combined initiatives in advanced sensor development, configurable sampling and deployment platforms, and robust wireless communications to address critical obstacles in enabling enhanced industrial efficiency.

Budampati, Rama; McBrady, Adam; Nusseibeh, Fouad

2009-09-28T23:59:59.000Z

174

Sustainable Office Lighting Options  

E-Print Network [OSTI]

Sustainable Office Lighting Options Task Lighting: Task lighting is a localized method of lighting a workspace so that additional, unnecessary lighting is eliminated, decreasing energy usage and costs. Illumination levels in the targeted work areas are higher with task lighting than with the ambient levels

Massachusetts at Amherst, University of

175

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Broader source: Energy.gov (indexed) [DOE]

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

176

Planning Wireless Networks with Demand Uncertainty using Robust ...  

E-Print Network [OSTI]

Abstract An optimal planning of future wireless networks is fundamental to satisfy rising traffic ..... COST 231. Urban micro cell measurements and building data.

2011-03-04T23:59:59.000Z

177

Power and spectrum efficient communications in wireless ad hoc networks  

E-Print Network [OSTI]

Ephremides, Joint Scheduling and Power Control for WirelessOptimal Power Control, Scheduling, and Routing in UWBDistributed Joint Scheduling and Power Control Algorithm for

Qu, Qi

2008-01-01T23:59:59.000Z

178

Wireless Plug-in Electric Vehicle (PEV) Charging  

Broader source: Energy.gov (indexed) [DOE]

(contd.) * Wireless power transfer using magnetic resonance coupling of air core transformer. - Power converter to regulate and drive resonant coil system - Simple uncontrolled...

179

Reducing Barriers To The Use of High-Efficiency Lighting Systems  

SciTech Connect (OSTI)

With funding from the U.S. Department of Energy (DOE), the Lighting Research Center (LRC) at Rensselaer Polytechnic Institute completed the four-year research project, Reducing Barriers to the Use of High-Efficiency Lighting Systems. The initial objectives were: (1) identifying barriers to widespread penetration of lighting controls in commercial/industrial (C/I) applications that employ fluorescent lamp technologies, and (2) making recommendations to overcome these barriers. The addition of a fourth year expanded the original project objectives to include an examination of the impact on fluorescent lamps from dimming utilizing different lamp electrode heating and dimming ratios. The scope of the project was narrowed to identify barriers to the penetration of lighting controls into commercial-industrial (C/I) applications that employ fluorescent lamp technologies, and to recommend means for overcoming these barriers. Working with lighting manufacturers, specifiers, and installers, the project identified technological and marketing barriers to the widespread use of lighting controls, specifically automatic-off controls, occupancy sensors, photosensors, dimming systems, communication protocols and load-shedding ballasts. The primary barriers identified include cost effectiveness of lighting controls to the building owner, lack of standard communication protocols to allow different part of the control system to communicate effectively, and installation and commissioning issues. Overcoming the identified barriers requires lighting control products on the market to achieve three main goals: (1) Achieve sufficient functionality to meet the key requirements of their main market. (2) Allow significant cost reduction compared to current market standard systems. Cost should consider: hardware capital cost including wiring, design time required by the specifier and the control system manufacturer, installation time required by the electrician, and commissioning time and remedial time required by the electrician and end user. (3) Minimize ongoing perceived overhead costs and inconvenience to the end user, or in other words, systems should be simple to understand and use. In addition, we believe that no lighting controls solution is effective or acceptable unless it contributes to, or does not compromise, the following goals: (1) Productivity--Planning, installation, commissioning, maintenance, and use of controls should not decrease business productivity; (2) Energy savings--Lighting controls should save significant amounts of energy and money in relation to the expense involved in using them (acceptable payback period); and/or (3) Reduced power demand--Society as a whole should benefit from the lowered demand for expensive power and for more natural resources. Discussions of technology barriers and developments are insufficient by themselves to achieve higher penetration of lighting controls in the market place. Technology transfer efforts must play a key role in gaining market acceptance. The LRC developed a technology transfer model to better understand what actions are required and by whom to move any technology toward full market acceptance.

Peter Morante

2005-12-31T23:59:59.000Z

180

Wireless energy transfer between anisotropic metamaterials shells  

SciTech Connect (OSTI)

The behavior of strongly coupled Radial Photonic Crystals shells is investigated as a potential alternative to transfer electromagnetic energy wirelessly. These sub-wavelength resonant microstructures, which are based on anisotropic metamaterials, can produce efficient coupling phenomena due to their high quality factor. A configuration of selected constitutive parameters (permittivity and permeability) is analyzed in terms of its resonant characteristics. The coupling to loss ratio between two coupled resonators is calculated as a function of distance, the maximum (in excess of 300) is obtained when the shells are separated by three times their radius. Under practical conditions an 83% of maximum power transfer has been also estimated. -- Highlights: Anisotropic metamaterial shells exhibit high quality factors and sub-wavelength size. Exchange of electromagnetic energy between shells with high efficiency is analyzed. Strong coupling is supported with high wireless transfer efficiency. End-to-end energy transfer efficiencies higher than 83% can be predicted.

Daz-Rubio, Ana; Carbonell, Jorge; Snchez-Dehesa, Jos, E-mail: jsdehesa@upv.es

2014-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Analyzing Options for Airborne Emergency Wireless Communications  

SciTech Connect (OSTI)

In the event of large-scale natural or manmade catastrophic events, access to reliable and enduring commercial communication systems is critical. Hurricane Katrina provided a recent example of the need to ensure communications during a national emergency. To ensure that communication demands are met during these critical times, Idaho National Laboratory (INL) under the guidance of United States Strategic Command has studied infrastructure issues, concerns, and vulnerabilities associated with an airborne wireless communications capability. Such a capability could provide emergency wireless communications until public/commercial nodes can be systematically restored. This report focuses on the airborne cellular restoration concept; analyzing basic infrastructure requirements; identifying related infrastructure issues, concerns, and vulnerabilities and offers recommended solutions.

Michael Schmitt; Juan Deaton; Curt Papke; Shane Cherry

2008-03-01T23:59:59.000Z

182

MARGINAL EXPENSE OIL WELL WIRELESS SURVEILLANCE MEOWS  

SciTech Connect (OSTI)

A marginal expense oil well wireless surveillance system to monitor system performance and production from rod-pumped wells in real time from wells operated by Vaquero Energy in the Edison Field, Main Area of Kern County in California has been successfully designed and field tested. The surveillance system includes a proprietary flow sensor, a programmable transmitting unit, a base receiver and receiving antenna, and a base station computer equipped with software to interpret the data. First, the system design is presented. Second, field data obtained from three wells is shown. Results of the study show that an effective, cost competitive, real-time wireless surveillance system can be introduced to oil fields across the United States and the world.

Mason M. Medizade; John R. Ridgely; Donald G. Nelson

2004-11-01T23:59:59.000Z

183

Lunar Wireless Power Transfer Feasibility Study  

SciTech Connect (OSTI)

This study examines the feasibility of a multi-kilowatt wireless radio frequency (RF) power system to transfer power between lunar base facilities. Initial analyses, show that wireless power transfer (WPT) systems can be more efficient and less expensive than traditional wired approaches for certain lunar and terrestrial applications. The study includes evaluations of the fundamental limitations of lunar WPT systems, the interrelationships of possible operational parameters, and a baseline design approach for a notionial system that could be used in the near future to power remote facilities at a lunar base. Our notional system includes state-of-the-art photovoltaics (PVs), high-efficiency microwave transmitters, low-mass large-aperture high-power transmit antennas, high-efficiency large-area rectenna receiving arrays, and reconfigurable DC combining circuitry.

Sheldon Freid, et al.

2008-06-01T23:59:59.000Z

184

Wireless boundary monitor system and method  

DOE Patents [OSTI]

A wireless boundary monitor system used to monitor the integrity of a boundary surrounding an area uses at least two housings having at least one transmitting means for emitting ultrasonic pressure waves to a medium. Each of the housings has a plurality of receiving means for sensing the pressure waves in the medium. The transmitting means and the receiving means of each housing are aimable and communicably linked. At least one of the housings is equipped with a local alarm means for emitting a first alarm indication whereby, when the pressure waves propagating from a transmitting means to a receiving means are sufficiently blocked by an object a local alarm means or a remote alarm means or a combination thereof emit respective alarm indications. The system may be reset either manually or automatically. This wireless boundary monitor system has useful applications in both indoor and outdoor environments.

Haynes, Howard D. (Knoxville, TN); Ayers, Curtis W. (Kingston, TN)

1997-01-01T23:59:59.000Z

185

Wireless boundary monitor system and method  

DOE Patents [OSTI]

A wireless boundary monitor system used to monitor the integrity of a boundary surrounding an area uses at least two housings having at least one transmitting means for emitting ultrasonic pressure waves to a medium. Each of the housings has a plurality of receiving means for sensing the pressure waves in the medium. The transmitting means and the receiving means of each housing are aimable and communicably linked. At least one of the housings is equipped with a local alarm means for emitting a first alarm indication whereby, when the pressure waves propagating from a transmitting means to a receiving means are sufficiently blocked by an object a local alarm means or a remote alarm means or a combination thereof emit respective alarm indications. The system may be reset either manually or automatically. This wireless boundary monitor system has useful applications in both indoor and outdoor environments. 4 figs.

Haynes, H.D.; Ayers, C.W.

1997-12-09T23:59:59.000Z

186

Wireless Networks A Cross-layer Perspective  

E-Print Network [OSTI]

214BC Great wall built by Shih Huang-Ti Fire towers to serve as alarms 500km (Great Wall to Hsien-yang) in 2 hours Transmission bandwidth 10-4 bits/s #12;A Brief History of Wireless Claude Chappe and the semaphore Played a key role in french revolution A tower for every 20km from Lille to Paris in 1792 Part

Libre de Bruxelles, Université

187

Hierarchical implementation of a wireless communications system  

E-Print Network [OSTI]

Implementafion Method. 1. 3 Literature Survey. 2 9 11 II TRANSCEIVER SYSTEM-LEVEL DESIGN AND MODELING. . . . . . 15 2. 1 2. 2 2. 3 2. 4 The Personal Communications System. System Specifications . 15 19 Wireless Communicafions Channel Description... 366 IX EXPER~AL RESULTS . 372 9. 1 9. 2 9. 3 9. 4 9. 5 9. 6 9. 7 9. 8 9. 9 Testing Strategy Convolutional Encoder . 64-Ary Modulator . Long-Code Sequence Generator and Spreader . . . . . . . . . . . . . . . . I and Q Channel Sequence...

Mayhugh, Terry L

2012-06-07T23:59:59.000Z

188

SWAP Project: Beyond the State of the Art on Harvested Energy-Powered Wireless Sensors  

E-Print Network [OSTI]

-efficient paradigm of wireless sensor networks with the self-sustainable capabilities of harvesting systems. SWAP

Rossi, Michele

189

Energy Efficiency of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks  

E-Print Network [OSTI]

Energy Efficiency of Symmetric Key Cryptographic Algorithms in Wireless Sensor Networks Xueying-- In this paper, we examine the energy efficiency of symmetric key cryptographic algorithms applied in wireless energy efficiency with a level of security suitable for wireless sensor networks. Keywords - wireless

Heys, Howard

190

Lighting Options for Homes.  

SciTech Connect (OSTI)

This report covers many aspects of various lighting options for homes. Types of light sources described include natural light, artificial light, incandescent lamps, fluorescent lamps, and high intensity discharge lamps. A light source selection guide gives the physical characteristics of these, design considerations, and common applications. Color, strategies for efficient lighting, and types of lighting are discussed. There is one section giving tips for various situations in specific rooms. Rooms and types of fixtures are shown on a matrix with watts saved by using the recommended type lighting for that room and room location. A major emphasis of this report is saving energy by utilizing the most suitable, recommended lighting option. (BN)

Baker, W.S.

1991-04-01T23:59:59.000Z

191

Solar-aware Routing in Wireless Sensor Networks  

E-Print Network [OSTI]

Solar-aware Routing in Wireless Sensor Networks Thiemo Voigt, Hartmut Ritter and Jochen Schiller energy sources such as solar power may provide unlimited energy resources to a changing subset these nodes is appealing. In this paper, we present solar-aware routing, a rout- ing protocol for wireless

192

Dynamic Malware Attack in Energy-Constrained Mobile Wireless Networks  

E-Print Network [OSTI]

Dynamic Malware Attack in Energy-Constrained Mobile Wireless Networks M.H.R. Khouzani, Saswati Sarkar Abstract Large scale proliferation of wireless technologies are dependent on developing reliable to the spread of self-replicating malicious codes known as malware. The malware can be used to initiate

Sarkar, Saswati

193

Stimulating Cooperative Diversity in Wireless Ad Hoc Networks through Pricing  

E-Print Network [OSTI]

Stimulating Cooperative Diversity in Wireless Ad Hoc Networks through Pricing Naveen Shastry in commercial wireless ad hoc networks. For the relay, cooperation represents both a real cost of energy a pricing game that stimulates cooperation via reimbursements to the relay. Specifically, given the price

Adve, Raviraj

194

Sustainability of Self-Configuring Wireless Sensor Bozena Kaminska  

E-Print Network [OSTI]

Sustainability of Self-Configuring Wireless Sensor Networks Bozena Kaminska Simon Fraser University monitoring and security. Those applications impose requirements for sustained, reliable, and fault-tolerant operation. We introduce a new ad-hoc wireless architecture in which forwarding is based on associativity

Gburzynski, Pawel

195

Security Schemes for Wireless Sensor Networks with Mobile Sink  

E-Print Network [OSTI]

........................ 35 10 Wireless sensor network with mobile sinks and sensor nodes using two separate key pools for key pre-distribution ......................................... 39 11 (a) Direct key discovery, (b) Indirect key discovery through interrmedi... Protocol parameter values .......................................................................... 108 1 CHAPTER I INTRODUCTION Mobility is exploited in the field of wireless sensor network [1], [2], [3], [4] to circum- vent multi...

Rasheed, Amar Adnan

2011-08-08T23:59:59.000Z

196

Approximate Minimum-Energy Multicasting in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

and a set of destination nodes, the problem is to build a minimum-energy multicast tree for the requestApproximate Minimum-Energy Multicasting in Wireless Ad Hoc Networks Weifa Liang, Senior Member, IEEE Abstract--A wireless ad hoc network consists of mobile nodes that are equipped with energy

Liang, Weifa

197

A Realistic Power Consumption Model for Wireless Sensor Network Devices  

E-Print Network [OSTI]

. Recent analyses of WSN energy efficiency have been widely based on a sensor node power consumption model1 A Realistic Power Consumption Model for Wireless Sensor Network Devices Qin Wang, Mark Hempstead}@eecs.harvard.edu Abstract-- A realistic power consumption model of wireless communication subsystems typically used in many

Hempstead, Mark

198

Power Management for Wireless Sensor Networks Based on Energy Budgets  

E-Print Network [OSTI]

Power Management for Wireless Sensor Networks Based on Energy Budgets Christian Renner Institute with wireless sensor networks powered by energy-harvesting supplies. We introduce the concept of an energy budget, the amount of energy available to a sensor node for a given period of time. The presented tools

Turau, Volker

199

Energy Efficiency of Encryption Schemes Applied to Wireless Sensor Networks  

E-Print Network [OSTI]

Energy Efficiency of Encryption Schemes Applied to Wireless Sensor Networks Xueying Zhang, Howard M (ICC 2010), Cape Town, South Africa, May 2010, and "Energy Efficiency of Symmetric Key Cryptographic In this paper, we focus on the energy efficiency of secure communication in wireless sensor networks (WSNs). Our

Heys, Howard

200

QoS Support in Multimedia Wireless Environments  

E-Print Network [OSTI]

. Second, new wireless devices such as cellular phones, PDAs, laptops are emerging to assist people population. Fourth, new hardware opportunities are appearing such as multi-frequency energyS-aware and energy-efficient solutions. The topic of resource management in wireless networks is also very broad

Xue, Yuan

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Energy Consumption in Coded Queues for Wireless Information Exchange  

E-Print Network [OSTI]

Energy Consumption in Coded Queues for Wireless Information Exchange Jasper Goseling, Richard J customers. We use this relation to ob- tain bounds on the energy consumption in a wireless information, for example, from the observations in [3] that using network coding can reduce the energy consumption

Boucherie, Richard J.

202

Energy-Efficient Capacity Optimization in Wireless Networks  

E-Print Network [OSTI]

Energy-Efficient Capacity Optimization in Wireless Networks Lu Liu, Xianghui Cao, Yu Cheng, Lili Du capacity in the most energy-efficient manner over a general large-scale wireless network, say, a multi numerical results demonstrate the energy efficiency improvement by the proposed energy-efficient

Wang, Yu

203

Multihop Wireless Networks: What's Wrong With Min Hopcount?  

E-Print Network [OSTI]

is bimodal ­ Links are either "good", or "bad" · All "good" links are equivalent ­ Sufficient condition for success · What about wireless? #12;Indoor Wireless Network 5th floor 6th floor 802.11b radios (fixed tx

204

Utility Maximization for Delay Constrained QoS in Wireless  

E-Print Network [OSTI]

Utility Maximization for Delay Constrained QoS in Wireless I-Hong Hou CSL and Department of CS of utility maxi- mization for clients with delay based QoS requirements in wireless networks. We adopt that the utility of a client is a function of the timely throughput it obtains. We treat the timely throughput

205

Handover Performance of HVAC Duct Based Indoor Wireless Networks  

E-Print Network [OSTI]

Handover Performance of HVAC Duct Based Indoor Wireless Networks A. E. Xhafa, P. Sonthikorn, and O in indoor wireless net- works (IWN) that use heating, ventilation, and air conditioning (HVAC) ducts.e., new call blocking and handover dropping probabilities, of an IWN that uses HVAC ducts are up to 6

Stancil, Daniel D.

206

Network Electricity Use Associated with Wireless Personal Digital Assistants  

E-Print Network [OSTI]

Network Electricity Use Associated with Wireless Personal Digital Assistants Jonathan Koomey1 the widely cited claim that the network electricity use associated with a wireless personal digital assistant PDA is equal to the electricity consumed by a refrigerator. It compiles estimates of the data flows

Kammen, Daniel M.

207

Voice Quality Evaluation for Wireless Transmission with ROHC (extended version  

E-Print Network [OSTI]

(reduction in header and total packet size), the voice quality, and the delay jitter. Importantly, we employ1 Voice Quality Evaluation for Wireless Transmission with ROHC (extended version and software code encoded voice with ROHC over a wireless link. We first present a tutorial on voice quality evaluation. We

Reisslein, Martin

208

An Integrated System Simulation Approach for Wireless Networked Control Systems  

E-Print Network [OSTI]

Vanderbilt University Nashville, TN, USA Abstract--Cyber-Physical Systems (CPS), such as networked control wireless networks. Accurate modeling of these communication networks is essential in the design and verification of CPS. Controller design needs to take into ac- count the wireless channel characteristics (e

Koutsoukos, Xenofon D.

209

ABHINAV MURALI ACES-205,Multimedia Wireless Networks Lab  

E-Print Network [OSTI]

(GSM) networks Linearly Polarized Micro strip Stacked Patch Antenna for GPS · Designed and fabricated a linearlyABHINAV MURALI ACES-205,Multimedia Wireless Networks Lab Department of Electrical Engineering) EXPERIENCE Multimedia Wireless Networks Lab, IIT Kanpur July,2012 - Present Project Associate · Currently

Jagannatham, Aditya K.

210

Periodic Constraint-Based Control Using Dynamic Wireless Sensor Scheduling  

E-Print Network [OSTI]

Periodic Constraint-Based Control Using Dynamic Wireless Sensor Scheduling James Weimer, Jos´e Ara´ujo, Aitor Hernandez and Karl Henrik Johansson Abstract-- Constraint-based control over wireless sensor net- works (WSNs) require control strategies that achieve a desired closed-loop system performance while

Johansson, Karl Henrik

211

Graphene-enabled Wireless Communication for Massive Multicore Architectures  

E-Print Network [OSTI]

Graphene-enabled Wireless Communication for Massive Multicore Architectures Sergi Abadal, Eduard. This goal is feasible by using graphene-based planar antennas, which can radiate signals at the Terahertz, this is the first work that discusses the utilization of graphene-enabled wireless communication for massive

Cabellos-Aparicio, Albert

212

Graphene-enabled Wireless Networks-on-Chip (Invited Paper)  

E-Print Network [OSTI]

Graphene-enabled Wireless Networks-on-Chip (Invited Paper) Ignacio Llatser, Sergi Abadal, Albert,abadal,amestres,acabello}@ac.upc.edu, eduard.alarcon@upc.edu Abstract--Graphene-enabled Wireless Communications (GWC) advocate for the use of graphene-based plasmonic antennas, or graphennas, which take advantage of the plasmonic properties

Politècnica de Catalunya, Universitat

213

Syncob: Collaborative Time Synchronization in Wireless Sensor Networks  

E-Print Network [OSTI]

an independent power sup- ply like a battery and use methods of energy harvesting like solar cells. To control the limited energy resources efficiently, wireless sensor networks typically undergo pe- riodic sleep-cycles to save energy. To collaborate for a common application, wireless sensor nodes have to be pre- cisely

Beigl, Michael

214

Energy Harvesting in Wireless Communications Communicating with Energy  

E-Print Network [OSTI]

Energy Harvesting in Wireless Communications Communicating with Energy Harvesting Transmitters Tech, utilizing strain Wireless networking with energy harvesting nodes: · Green, self-sufficient nodes, · Extended network lifetime, · Smaller nodes with smaller batteries, · Very limited and varying energy

Smith, Adam D.

215

Dynamic Resource Provisioning for Energy Efficiency in Wireless Access Networks  

E-Print Network [OSTI]

of controlling how much of the network infrastructure is actually needed and which parts can be temporarily. Considering that most of the energy in wireless access networks is consumed in the radio part, a dynamic the two most common wireless access technologies, namely cellular and WLAN. Main features of the proposed

Wichmann, Felix

216

Mobile lighting apparatus  

DOE Patents [OSTI]

A mobile lighting apparatus includes a portable frame such as a moveable trailer or skid having a light tower thereon. The light tower is moveable from a stowed position to a deployed position. A hydrogen-powered fuel cell is located on the portable frame to provide electrical power to an array of the energy efficient lights located on the light tower.

Roe, George Michael; Klebanoff, Leonard Elliott; Rea, Gerald W; Drake, Robert A; Johnson, Terry A; Wingert, Steven John; Damberger, Thomas A; Skradski, Thomas J; Radley, Christopher James; Oros, James M; Schuttinger, Paul G; Grupp, David J; Prey, Stephen Carl

2013-05-14T23:59:59.000Z

217

Flexible network wireless transceiver and flexible network telemetry transceiver  

DOE Patents [OSTI]

A transceiver for facilitating two-way wireless communication between a baseband application and other nodes in a wireless network, wherein the transceiver provides baseband communication networking and necessary configuration and control functions along with transmitter, receiver, and antenna functions to enable the wireless communication. More specifically, the transceiver provides a long-range wireless duplex communication node or channel between the baseband application, which is associated with a mobile or fixed space, air, water, or ground vehicle or other platform, and other nodes in the wireless network or grid. The transceiver broadly comprises a communication processor; a flexible telemetry transceiver including a receiver and a transmitter; a power conversion and regulation mechanism; a diplexer; and a phased array antenna system, wherein these various components and certain subcomponents thereof may be separately enclosed and distributable relative to the other components and subcomponents.

Brown, Kenneth D. (Grain Valley, MO)

2008-08-05T23:59:59.000Z

218

EK101 Engineering Light Smart Lighting  

E-Print Network [OSTI]

EK101 Engineering Light Smart Lighting Homework for 9/10 1. Make an estimate (using if the patent is granted.) 3. What is a lumen? A lux? How are the two related? How would you use a lux meter, (Lux, Lumens/m2) Luminous Flux: Perceivable light power from a source, (Lumens) Use the lux meter

Bifano, Thomas

219

Specific light in sculpture  

E-Print Network [OSTI]

Specific light is defined as light from artificial or altered natural sources. The use and manipulation of light in three dimensional sculptural work is discussed in an historic and contemporary context. The author's work ...

Powell, John William

1989-01-01T23:59:59.000Z

220

Improving performance of transmission control protocol (TCP) over mobile wireless networks  

E-Print Network [OSTI]

) August 1996 Major Subject: Computer Science ABSTRACT Improving Performance of Transmission Control Protocol (TCP) over Mobile Wireless Networks. (August 1996) Bikram Singli Balrshi, B. Tech. , Delhi Institute of Technology Chair of Advisory.... Explicit Bad State Notification (EBSN) . d. EBSN in Local-Area Wireless Networks . D. Results and Discussion 1. Wide-Area Wireless Networks . 2. Local-Area Wireless Networks SEAMLESS COMMUNICATION IN MOBILE WIRELESS NETWORKS A. Summary of Previous...

Bakshi, Bikram Singh

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

A Taxonomy of Wireless Micro-Sensor Network Models Sameer Tilak Nael B. Abu-Ghazaleh Wendi Heinzelman  

E-Print Network [OSTI]

A Taxonomy of Wireless Micro-Sensor Network Models £ Sameer Tilak Nael B. Abu-Ghazaleh Wendi wireless networks. This paper examines this emerging field to clas- sify wireless micro-sensor networks to classify wireless micro-sensor networks. In partic- ular, we classify the aspects of wireless micro

Han, Richard Y.

222

Passive wireless sensing tags NASA inflatable structures.  

SciTech Connect (OSTI)

This report gives a description of several types of wireless, unpowered remote sensors. Surface acoustic wave (SAW) devices were coupled with conventional sensors to create entirely new types of sensors. These sensors report physically measurable data in the same manner as the conventional sensors, but they do it remotely and without any local power source. The sensors are measured remotely using a radar-like interrogation device, and the sensors and their related communication electronics draw all of the power needed for communicating from the radar pulse. The report covers only a description of prototype sensors and not of the manufacturing requirements of these devices.

Brocato, Robert Wesley

2006-03-01T23:59:59.000Z

223

Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy`s Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE`s Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

1992-12-01T23:59:59.000Z

224

Analysis of federal policy options for improving US lighting energy efficiency: Commercial and residential buildings  

SciTech Connect (OSTI)

The US Department of Energy (DOE) has recognized the opportunity to achieve energy, economic, and environmental benefits by promoting energy-efficient lighting through federal policies, including lighting standards, financial incentives, and information programs. To assist in this process, the Office of Conservation and Renewable Energy's Office of Codes and Standards invited Lawrence Berkeley Laboratory to assess prospective national impacts for a variety of policy options. Some progress has already been made in developing lighting policies at both the federal and state levels. The US DOE's Office of Building Technologies has evaluated lighting efficiency incentives as part of its analysis for the National Energy Strategy. Fluorescent and incandescent lamp standards are included in the national Energy Policy Act of 1992 (P.L. 102-486, October 24, 1992). A few states have analyzed or implemented lamp and luminaire standards. Many policy-related issues merit further investigation. For example, there is considerable debate over issues such as mandatory or voluntary standards versus component labeling and other education-oriented strategies. Several different technologies are involved that interact with each other-lamps (incandescent, compact fluorescent, and HID), ballasts (for fluorescent and HID lamps), and fixtures with reflectors and lenses. Control systems and operation patterns must also be considered (timers, automated dimming, or occupancy sensors). Lighting applications are diverse, ranging from offices, restaurants, hallways, hospital operating rooms, to exterior lights. Lighting energy use influences heating and cooling requirements in buildings. Successful lighting system design must also address interactions between architectural design elements and daylighting availability. Proper system installation and ongoing operation and maintenance are crucial. The economic aspects of the preceding points must also be considered for policy making.

Atkinson, B.A.; McMahon, J.E.; Mills, E.; Chan, P.; Chan, T.W.; Eto, J.H.; Jennings, J.D.; Koomey, J.G.; Lo, K.W.; Lecar, M.; Price, L.; Rubinstein, F.; Sezgen, O.; Wenzel, T.

1992-12-01T23:59:59.000Z

225

COMPARING THE LIGHT CURVES OF SIMULATED TYPE Ia SUPERNOVAE WITH OBSERVATIONS USING DATA-DRIVEN MODELS  

SciTech Connect (OSTI)

We propose a robust, quantitative method to compare the synthetic light curves of a Type Ia supernova (SN Ia) explosion model with a large set of observed SNe Ia, and derive a figure of merit for the explosion model's agreement with observations. The synthetic light curves are fit with the data-driven model SALT2 which returns values for stretch, color, and magnitude at peak brightness, as well as a goodness-of-fit parameter. Each fit is performed multiple times with different choices of filter bands and epoch range in order to quantify the systematic uncertainty on the fitted parameters. We use a parametric population model for the distribution of observed SN Ia parameters from large surveys, and extend it to represent red, dim, and bright outliers found in a low-redshift SN Ia data set. We discuss the potential uncertainties of this population model and find it to be reliable given the current uncertainties on cosmological parameters. Using our population model, we assign each set of fitted parameters a likelihood of being observed in nature, and a figure of merit based on this likelihood. We define a second figure of merit based on the quality of the light curve fit, and combine the two measures into an overall figure of merit for each explosion model. We compute figures of merit for a variety of one-, two-, and three-dimensional explosion models and show that our evaluation method allows meaningful inferences across a wide range of light curve quality and fitted parameters.

Diemer, Benedikt; Kessler, Richard; Graziani, Carlo; Jordan, George C. IV; Lamb, Donald Q.; Long, Min; Van Rossum, Daniel R., E-mail: bdiemer@oddjob.uchicago.edu [Flash Center for Computational Science, University of Chicago, Chicago, IL 60637 (United States)

2013-08-20T23:59:59.000Z

226

1st Workshop on Dependability Issues in Wireless Ad Hoc Networks and Sensor Networks (DIWANS'04), Florence, Italy, Fault Tolerant Communication Topologies for Wireless Ad Hoc Networks  

E-Print Network [OSTI]

1st Workshop on Dependability Issues in Wireless Ad Hoc Networks and Sensor Networks (DIWANS'04), Florence, Italy, June 2004 Fault Tolerant Communication Topologies for Wireless Ad Hoc Networks Bernd, distributed algorithms, failure locality 1 Introduction Wireless sensor networks, mobile ad hoc networks

227

Lighting and Daylight Harvesting  

E-Print Network [OSTI]

exposing us to the latest products and technologies. Daylight Harvesting A system of controlling the direction and the quantity of light both natural and artificial within a given space. This implies: Control of fenestration in terms of size..., transmission and direction. Control of reflected light within a space. Control of electric light in terms of delivery and amount Daylight harvesting systems are typically designed to maintain a minimum recommended light level. This light level...

Bos, J.

2011-01-01T23:59:59.000Z

228

Wireless Infrastructure for Performing Monitoring, Diagnostics, and Control HVAC and Other Energy-Using Systems in Small Commercial Buildings  

SciTech Connect (OSTI)

This project focused on developing a low-cost wireless infrastructure for monitoring, diagnosing, and controlling building systems and equipment. End users receive information via the Internet and need only a web browser and Internet connection. The system used wireless communications for: (1) collecting data centrally on site from many wireless sensors installed on building equipment, (2) transmitting control signals to actuators and (3) transmitting data to an offsite network operations center where it is processed and made available to clients on the Web (see Figure 1). Although this wireless infrastructure can be applied to any building system, it was tested on two representative applications: (1) monitoring and diagnostics for packaged rooftop HVAC units used widely on small commercial buildings and (2) continuous diagnosis and control of scheduling errors such as lights and equipment left on during unoccupied hours. This project developed a generic infrastructure for performance monitoring, diagnostics, and control, applicable to a broad range of building systems and equipment, but targeted specifically to small to medium commercial buildings (an underserved market segment). The proposed solution is based on two wireless technologies. The first, wireless telemetry, is used for cell phones and paging and is reliable and widely available. This risk proved to be easily managed during the project. The second technology is on-site wireless communication for acquiring data from sensors and transmitting control signals. The technology must enable communication with many nodes, overcome physical obstructions, operate in environments with other electrical equipment, support operation with on-board power (instead of line power) for some applications, operate at low transmission power in license-free radio bands, and be low cost. We proposed wireless mesh networking to meet these needs. This technology is relatively new and has been applied only in research and tests. This proved to be a major challenge for the project and was ultimately abandoned in favor of a directly wired solution for collecting sensor data at the building. The primary reason for this was the relatively short ranges at which we were able to effectively place the sensor nodes from the central receiving unit. Several different mesh technologies were attempted with similar results. Two hardware devices were created during the original performance period of the project. The first device, the WEB-MC, is a master control unit that has two radios, a CPU, memory, and serves as the central communications device for the WEB-MC System (Currently called the 'BEST Wireless HVAC Maintenance System' as a tentative commercial product name). The WEB-MC communicates with the local mesh network system via one of its antennas. Communication with the mesh network enables the WEB-MC to configure the network, send/receive data from individual motes, and serves as the primary mechanism for collecting sensor data at remote locations. The second antenna enables the WEB-MC to connect to a cellular network ('Long-Haul Communications') to transfer data to and from the NorthWrite Network Operations Center (NOC). A third 'all-in-one' hardware solution was created after the project was extended (Phase 2) and additional resources were provided. The project team leveraged a project funded by the State of Washington to develop a hardware solution that integrated the functionality of the original two devices. The primary reason for this approach was to eliminate the mesh network technical difficulties that severely limited the functionality of the original hardware approach. There were five separate software developments required to deliver the functionality needed for this project. These include the Data Server (or Network Operations Center), Web Application, Diagnostic Software, WEB-MC Embedded Software, Mote Embedded Software. Each of these developments was necessarily dependent on the others. This resulted in a challenging management task - requiring high bandwidth communications among

Patrick O'Neill

2009-06-30T23:59:59.000Z

229

Self-Triggered Control over Wireless Sensor and Actuator Networks  

E-Print Network [OSTI]

. Following this trend, several vendors are introducing devices that communicate over low-power wireless and the National Science Foun- dation award 0834771. adjust heating, ventilation and air conditioning (HVAC

Johansson, Karl Henrik

230

Low Power Filtering Techniques for Wideband and Wireless Applications  

E-Print Network [OSTI]

This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

Gambhir, Manisha

2010-10-12T23:59:59.000Z

231

Link Quality Metrics in Large Scale Indoor Wireless Sensor Networks  

E-Print Network [OSTI]

^ut ´energ´etique de cette estimation et de ses cons´equences sur la stabilit´e des routes construites sur (WSN) 1 Introduction Much research has considered the problem of characterizing wireless links

Boyer, Edmond

232

Path-Loss Characteristics of Urban Wireless Channels  

E-Print Network [OSTI]

Wireless channel data was collected in Cambridge, Massachusetts for diverse propagation environments over distances ranging from tens of meters to several kilometers using mobile 2.4-GHz transmitters and receivers. The ...

Herring, Keith T.

233

Energy-efficient wireless sensors : fewer bits, Moore MEMS  

E-Print Network [OSTI]

Adoption of wireless sensor network (WSN) technology could enable improved efficiency across a variety of industries that include building management, agriculture, transportation, and health care. Most of the technical ...

Chen, Fred (Fred Fu-Chin)

2011-01-01T23:59:59.000Z

234

Wireless Electricity Metering of Miscellaneous and Electronic Devices in Buildings  

E-Print Network [OSTI]

Wireless Electricity Metering of Miscellaneous and Electronic Devices in Buildings, University of California, Berkeley, USA Abstract- Miscellaneous and electronic devices hundreds of miscellaneous and electronic devices where metered for several months

Culler, David E.

235

Robust message routing for mobile (wireless) ad hoc networks.  

SciTech Connect (OSTI)

This report describes the results of research targeting improvements in the robustness of message transport in wireless ad hoc networks. The first section of the report provides an analysis of throughput and latency in the wireless medium access control (MAC) layer and relates the analysis to the commonly used 802.11 protocol. The second section describes enhancements made to several existing models of wireless MAC and ad hoc routing protocols; the models were used in support of the work described in the following section. The third section of the report presents a lightweight transport layer protocol that is superior to TCP for use in wireless networks. In addition, it introduces techniques that improve the performance of any ad hoc source routing protocol. The fourth section presents a novel, highly scalable ad hoc routing protocol that is based on geographic principles but requires no localization hardware.

Goldsby, Michael E.; Johnson, Michael M.; Kilman, Dominique Marie (Sandia National Laboratories, Albuquerque, NM); Bierbaum, Neal Robert; Chen, Helen Y.; Ammerlahn, Heidi R.; Tsang, Rose P.; Nicol, David M. (University of Illinois, Urbana, IL)

2004-01-01T23:59:59.000Z

236

Improved Wireless Performance from Mode Scattering in Ventilation Ducts  

E-Print Network [OSTI]

as an in-building wireless infrastructure, prior work has developed an empirical model of the power loss duct systems. Specifically, they found that the power loss due to a signal that passes through multiple

Stancil, Daniel D.

237

Wireless Sensor Network for Monitoring of Historic Structures under Rehabilitation  

E-Print Network [OSTI]

The use of a wireless sensor network (WSN) to monitor an historic structure under rehabilitation is the focus of this research. To thoroughly investigate the issue, two main objectives are addressed: the development of a reliable WSN tailored...

Samuels, Julie Marie

2012-02-14T23:59:59.000Z

238

Cell Breathing in Wireless LANs: Algorithms and Evaluation  

E-Print Network [OSTI]

, IEEE Computer Society, Mohammad T. Hajiaghayi, Kamal Jain, Member, IEEE, Sayyed Vahab Mirrokni, Lili Qiu, Member, IEEE, and Amin Saberi Abstract--Wireless LAN administrators often have to deal

Qiu, Lili

239

Cell Breathing in Wireless LANs: Algorithms and Evaluation  

E-Print Network [OSTI]

Cell Breathing in Wireless LANs: Algorithms and Evaluation Paramvir Bahl Mohammad T. Hajiaghayi Kamal Jain Vahab Mirrokni Lili Qiu Amin Saberi Microsoft Research CMU Microsoft Research MIT UT Austin

Hajiaghayi, Mohammad

240

Challenges and Solutions for Intrusion Detection in Wireless Mesh Networks  

E-Print Network [OSTI]

The problem of intrusion detection in wireless mesh networks (WMN) is challenging, primarily because of lack of single vantage points where traffic can be analyzed and the limited resources available to participating nodes. Although the problem has...

Hassanzadeh, Amin

2014-05-03T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Wireless power transmission utilizing a phased array of Tesla coils  

E-Print Network [OSTI]

This thesis discusses the theory and design of coupled resonant systems and how they can be linked in a phased array for the wireless transmission of electrical power. A detailed derivation of their operational theory is ...

Stark, Joseph C. (Joseph Charles), 1980-

2004-01-01T23:59:59.000Z

242

Adaptive primary side control for a wireless power transfer optimization  

E-Print Network [OSTI]

A resonant inductive wireless power transfer system, consisting of a primary (transmitter) circuit and secondary (receiver) circuit, was designed and implemented. This document also contains a novel indirect feedback method ...

Bogoda, Thilani Imanthika Dissanayake

2012-01-01T23:59:59.000Z

243

SoftCast: Clean-slate Scalable Wireless Video  

E-Print Network [OSTI]

Video broadcast and mobile video challenge the conventional wireless design. In broadcast and mobile scenarios the bit rate supported by the channel differs across receivers and varies quickly over time. The conventional ...

Jakubczak, Szymon

2011-02-15T23:59:59.000Z

244

Analyzing video compression for transporting over wireless fading channels  

E-Print Network [OSTI]

Wireless video communication is becoming increasingly popular these days with new applications such as TV on mobile and video phones. Commercial success of these applications requires superior video quality at the receiver. So it is imperative...

Kannan, Karthik

2006-10-30T23:59:59.000Z

245

On delay-sensitive communication over wireless systems  

E-Print Network [OSTI]

consider a number of objectives. 1. Develop an integrated methodology for the analysis of wireless systems that support delay-sensitive applications based, in part, on large deviation theory. 2. Use this methodology to identify fundamental performance...

Liu, Lingjia

2009-05-15T23:59:59.000Z

246

A Distributed Wearable, Wireless Sensor System for Evaluating Professional  

E-Print Network [OSTI]

This paper introduces a compact, wireless, wearable system that measures signals indicative of forces, torques and other descriptive and evaluative features that the human body undergoes during bursts of extreme physical ...

Lapinski, Michael Tomasz

247

DEVELOPMENT OFA WIRELESS ACTIVE SYSTEM FOR TPS STRUCTURAL HEALTH MONITORING  

E-Print Network [OSTI]

TPS damage. Several essential aspects are being studied: (a) development of high temperature aspects are being studied: (a) development of high temperature piezoelectric wafer active sensor (HTDEVELOPMENT OFA WIRELESS ACTIVE SYSTEM FOR TPS STRUCTURAL HEALTH MONITORING Victor Giurgiutiu1

Giurgiutiu, Victor

248

Self-configuration, -optimisation and -healing in wireless networks  

E-Print Network [OSTI]

into wireless access networks are (i) to effectuate substantial operational and capital expenditure (O/CAPEX and illustrates the expected gains in terms of O/CAPEX reductions and perform- ance enhancement. An overview

249

Explicit congestion indication for TCP over wireless networks  

E-Print Network [OSTI]

Transmission control protocol (TCP), the widely used transport protocol in the Internet, assumes that packet losses are because of congestion. Wireless networks have higher error rates than wired networks; TCP misinterprets the error losses...

Shishir

2012-06-07T23:59:59.000Z

250

Low Power Adaptive Equaliser Architectures for Wireless LMMSE Receivers  

E-Print Network [OSTI]

Power consumption requires critical consideration during system design for portable wireless communication devices as it has a direct influence on the battery weight and volume required for operation. Wideband Code ...

Tennant, Mark P

2007-01-01T23:59:59.000Z

251

Physiological Sensor System for a wireless tactile display  

E-Print Network [OSTI]

This research focuses on the development of a wearable Physiological Sensor System (PSS) that can be used with a wireless tactile control unit to monitor the physiological status of a mobile user. Two physiological variables, ...

Deo, Nikhila

2005-01-01T23:59:59.000Z

252

Municipal wireless mesh networks as a competitive broadband delivery platform  

E-Print Network [OSTI]

Recently there has been a growing interest in deploying Wireless Mesh Networks by municipalities. This interest stems from the desire to provide broadband connectivity to users lacking access to broadband alternatives. The ...

Hassan-Ali, Mudhafar

2007-01-01T23:59:59.000Z

253

Optimal Classifier Based Spectrum Sensing in Cognitive Radio Wireless Systems  

E-Print Network [OSTI]

Optimal Classifier Based Spectrum Sensing in Cognitive Radio Wireless Systems Siddharth Sharma tolerance. General Terms Algorithms, Theory, Reliability. Keywords Cognitive Radio; Cooperative Spectrum Cognitive radio (CR) networks have been proposed as a revolutionary breakthrough to enhance spectrum

Jagannatham, Aditya K.

254

Integration of wireless sensor networks in environmental monitoring cyber infrastructure  

E-Print Network [OSTI]

Integration of wireless sensor networks in environmental monitoring cyber infrastructure Jue Yang ? to revolutionize many science and engineering domains. We present a novel environmental monitoring system collection, management, visualization, dissemination, and exchange, conforming to the new Sensor Web

Huang, Yan

255

A comparative study of Rayleigh fading wireless channel simulators  

E-Print Network [OSTI]

Computer simulation is now increasingly being used for design and performance evaluation of communication systems. When simulating a mobile wireless channel for communication systems, it is usually assumed that the fading process is a random variate...

Sathini Ramaswamy, Vishnu Raghavan

2006-04-12T23:59:59.000Z

256

Ivan Stojmenovic 1 Wireless Sensor Networks  

E-Print Network [OSTI]

· Temperature, Chemicals · Light, Vibrations, Motion · Seismic data, Acoustic data · strain, torque, load Stojmenovic 7 Applications.. more.. Habitat monitoring UCLA Environment Agriculture Pollution Meteorological

Stojmenovic, Ivan

257

Wireless Sensors and Networks for Advanced Energy Management  

SciTech Connect (OSTI)

Numerous national studies and working groups have identified low-cost, very low-power wireless sensors and networks as a critical enabling technology for increasing energy efficiency, reducing waste, and optimizing processes. Research areas for developing such sensor and network platforms include microsensor arrays, ultra-low power electronics and signal conditioning, data/control transceivers, and robust wireless networks. A review of some of the research in the following areas will be discussed: (1) Low-cost, flexible multi-sensor array platforms (CO{sub 2}, NO{sub x}, CO, humidity, NH{sub 3}, O{sub 2}, occupancy, etc.) that enable energy and emission reductions in applications such as buildings and manufacturing; (2) Modeling investments (energy usage and savings to drive capital investment decisions) and estimated uptime improvements through pervasive gathering of equipment and process health data and its effects on energy; (3) Robust, self-configuring wireless sensor networks for energy management; and (4) Quality-of-service for secure and reliable data transmission from widely distributed sensors. Wireless communications is poised to support technical innovations in the industrial community, with widespread use of wireless sensors forecasted to improve manufacturing production and energy efficiency and reduce emissions. Progress being made in wireless system components, as described in this paper, is helping bring these projected improvements to reality.

Hardy, J.E.

2005-05-06T23:59:59.000Z

258

Impact of Fading Wireless Channel on The Performance of Game Theoretic Power Control Algorithms for CDMA Wireless Data  

E-Print Network [OSTI]

for CDMA Wireless Data Mohammad Hayajneh United Arab Emirates University P.O.Box 17555, Al Ain , UAE chaouki@ece.unm.edu Walid Ibrahim United Arab Emirates University P.O.Box 17555, Al Ain , UAE walidibr

259

Energy efficiency in wireless communication systems  

DOE Patents [OSTI]

Wireless communication systems and methods utilize one or more remote terminals, one or more base terminals, and a communication channel between the remote terminal(s) and base terminal(s). The remote terminal applies a direct sequence spreading code to a data signal at a spreading factor to provide a direct sequence spread spectrum (DSSS) signal. The DSSS signal is transmitted over the communication channel to the base terminal which can be configured to despread the received DSSS signal by a spreading factor matching the spreading factor utilized to spread the data signal. The remote terminal and base terminal can dynamically vary the matching spreading factors to adjust the data rate based on an estimation of operating quality over time between the remote terminal and base terminal such that the amount of data being transmitted is substantially maximized while providing a specified quality of service.

Caffrey, Michael Paul; Palmer, Joseph McRae

2012-12-11T23:59:59.000Z

260

AIRPORT LIGHTING Session Highlights  

E-Print Network [OSTI]

AIRPORT LIGHTING Session Highlights In May 2002, the Airport Technical Assistance Program, also known as AirTAP, sponsored three airport-lighting training sessions at different locations in Minnesota information on airport lighting and navigational aid equipment selection, funding, maintenance, and operation

Minnesota, University of

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

-MAC: An Energy-Efficient Medium Access Control for Wireless Sensor Networks  

E-Print Network [OSTI]

-MAC: An Energy-Efficient Medium Access Control for Wireless Sensor Networks Andre Barroso, Utz: ¡ a.barroso u.roedig c.sreenan¢ @cs.ucc.ie Abstract-- For the long-term deployment of wireless sensor

Roedig, Utz

262

Rehabilitation engineers help people with disabilities with wireless technology LATEST NEWS  

E-Print Network [OSTI]

Information Technology Management & Policy Sciences RELATED LINKS - Economic Development News - GTRI Annual two parallel goals: (1) to develop new and innovative ways of applying mobile wireless technologiesRehabilitation engineers help people with disabilities with wireless technology SEARCH LATEST NEWS

263

Delay Analysis of Maximum Weight Scheduling in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

This paper studies delay properties of the well-known maximum weight scheduling algorithm in wireless ad hoc networks. We consider wireless networks with either one-hop or multihop flows. Specifically, this paper shows ...

Modiano, Eytan H.

264

Health Monitoring of Drive Connected Three-Phase Induction Motors ----- From Wired Towards Wireless Sensor Networks  

E-Print Network [OSTI]

5.7: Wireless sensor installation photo (a) accelerometer (5.7 Wireless sensor installation photo (a) accelerometer (b)set up (a) Photo (b) Diagram (b) Sensor: Three vibration

Xue, Xin

2009-01-01T23:59:59.000Z

265

A functional approach for studying technological progress : extension to wireless telecommunications technology  

E-Print Network [OSTI]

This thesis attempts to study the technological progress of wireless technology and the wireless industry throughout history, using high-level, non-device specific performance metrics. Such metrics are developed by following ...

Amaya, Mario A

2008-01-01T23:59:59.000Z

266

Improving packet delivery efficiency using multi-radio diversity in wireless LANs  

E-Print Network [OSTI]

Data transmissions in Wireless Local Area Networks (WLANs) often suffer from bit errors that arise from the notoriously complex and time-varying signal propagation characteristics of the wireless medium. A number of physical ...

Miu, Allen Ka Lun, 1977-

2006-01-01T23:59:59.000Z

267

DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER SENSORS  

E-Print Network [OSTI]

DAMAGE DETECTION METHODS ON WIND TURBINE BLADE TESTING WITH WIRED AND WIRELESS ACCELEROMETER turbine blade. We compare the data collected from the wireless sensors against wired sensors for nonstationary blade excitations. KEYWORDS : Structural Health Monitoring, Damage Detection, Wind Turbine

Paris-Sud XI, Université de

268

Circuits and systems for efficient portable-to-portable wireless charging  

E-Print Network [OSTI]

In today's world of ever-increasing low-power portable electronics, from implants to wireless accessories, powering these devices efficiently and conveniently is an escalating issue. The proposed solution is to wirelessly ...

Jin, Rui, M. Eng. Massachusetts Institute of Technology

2014-01-01T23:59:59.000Z

269

VIDEO TRANSCODING GATEWAY FOR WIRELESS VIDEO ACCESS Zhijun Lei, Nicolas D. Georganas  

E-Print Network [OSTI]

-000 - VIDEO TRANSCODING GATEWAY FOR WIRELESS VIDEO ACCESS Zhijun Lei, Nicolas D. Georganas several typical video transcoding architectures and major applications of video transcoding. We identify issues involved in access video streams through handheld devices and wireless networks. To handle

Ottawa, University of

270

E-Print Network 3.0 - airborne emergency wireless Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

networks. The main source of diversity is the existence of multiple paths in wireless networks... decided to use the gap model proposed in 13 to model the airborne wireless...

271

Achieving Queue-Length Stability Through Maximal Scheduling in Wireless Networks  

E-Print Network [OSTI]

stability region; however, these scheduling strategies also require centralized control. Although [5], [6Achieving Queue-Length Stability Through Maximal Scheduling in Wireless Networks Prasanna Chaporkar through distributed scheduling in wireless networks. We consider a simple, local information based

Sarkar, Saswati

272

Power Control and Transmission Scheduling for Network Utility Maximization in Wireless Networks  

E-Print Network [OSTI]

Power Control and Transmission Scheduling for Network Utility Maximization in Wireless Networks Min power control and transmis- sion scheduling problem in wireless networks with average power constraints. Index Terms--Network utility maximization, power control, transmission scheduling, column generation I

Sharma, Vinod

273

LDPC code-based bandwidth efficient coding schemes for wireless communications  

E-Print Network [OSTI]

This dissertation deals with the design of bandwidth-efficient coding schemes with Low-Density Parity-Check (LDPC) for reliable wireless communications. Code design for wireless channels roughly falls into three categories: (1) when channel state...

Sankar, Hari

2009-06-02T23:59:59.000Z

274

Light emitting device comprising phosphorescent materials for white light generation  

DOE Patents [OSTI]

The present invention relates to phosphors for energy downconversion of high energy light to generate a broadband light spectrum, which emit light of different emission wavelengths.

Thompson, Mark E.; Dapkus, P. Daniel

2014-07-22T23:59:59.000Z

275

Light Duty Combustion Research: Advanced Light-Duty Combustion...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combustion Research: Advanced Light-Duty Combustion Experiments Light Duty Combustion Research: Advanced Light-Duty Combustion Experiments 2009 DOE Hydrogen Program and Vehicle...

276

MAC layer power management schemes for efficient energy- delay tradeoffs in wireless local area networks  

E-Print Network [OSTI]

G. De Micheli, Energy Efficient Design of Portable WirelessSimunic, Energy Efficient System Design and Utilization

Sarkar, Mahasweta

2006-01-01T23:59:59.000Z

277

ApplicationSpecific Protocol Architectures for Wireless Networks Wendi Beth Heinzelman  

E-Print Network [OSTI]

for the degree of Doctor of Philosophy Abstract In recent years, advances in energy­efficient design and wireless

Heinzelman, Wendi

278

Addressing the Energy-Delay Tradeoff in Wireless Networks with Load-Proportional Energy Usage  

E-Print Network [OSTI]

. The protocol aspects of the energy efficient design of wireless networks focuses on a number of topics

Sikdar, Biplab

279

Protecting a University's Wireless Data Network with the WPA and VPN Security Solutions  

E-Print Network [OSTI]

.11i standard as a security solution will require a major change in the wireless network elements and wireless terminals due to the cryptographic overhead of AES. Gast, M. S. (2002). 802.11 Wireless Networks: The Definitive Guide. Sebastopol, CA..., IN: Cisco Press. Gast, M. S. (2002). 802.11 Wireless Networks: The Definitive Guide. Sebastopol, CA: O?Reilly & Associates, Inc. Gordon, L. A., Loeb, M. P., Lucyshyn, W., & Richardson, R. (2006). CSI/FBI Computer Crime and Security Survey...

Saksupakul, Rattanachai

2007-05-18T23:59:59.000Z

280

Design and Optimization of Monitoring and Feedback Systems in Wireless Health  

E-Print Network [OSTI]

a number of standard personal devices such as cell phones,small wireless devices such as personal digital assistants (

Rofouei, Mahsan

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Photonic crystal light source  

DOE Patents [OSTI]

A light source is provided by a photonic crystal having an enhanced photonic density-of-states over a band of frequencies and wherein at least one of the dielectric materials of the photonic crystal has a complex dielectric constant, thereby producing enhanced light emission at the band of frequencies when the photonic crystal is heated. The dielectric material can be a metal, such as tungsten. The spectral properties of the light source can be easily tuned by modification of the photonic crystal structure and materials. The photonic crystal light source can be heated electrically or other heating means. The light source can further include additional photonic crystals that exhibit enhanced light emission at a different band of frequencies to provide for color mixing. The photonic crystal light source may have applications in optical telecommunications, information displays, energy conversion, sensors, and other optical applications.

Fleming, James G. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Bur, James A. (Corrales, NM)

2004-07-27T23:59:59.000Z

282

Clique-Based Randomized Multiple Access for Energy-Efficient Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Clique-Based Randomized Multiple Access for Energy-Efficient Wireless Ad Hoc Networks Paul G protocol design for wireless ad hoc networks is between proactive and reactive coor- dination, where describe Clique-Based Randomized Multiple Access (CRMA), a distributed MAC protocol for wireless ad hoc

283

Report on a Working Session on Security in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Report on a Working Session on Security in Wireless Ad Hoc Networks Levente Butty´an Jean organized a working session de- voted to the topic of security in wireless ad hoc networks. This event took setting. Securing wireless ad hoc networks is particularly diffi- cult for many reasons including

Chen, Yuanzhu Peter

284

A New MAC Scheme Supporting Voice/Data Traffic in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

A New MAC Scheme Supporting Voice/Data Traffic in Wireless Ad Hoc Networks Ping Wang, Member, IEEE, Hai Jiang, Member, IEEE, and Weihua Zhuang, Fellow, IEEE Abstract--In wireless ad hoc networks information exchanges among the nodes. Index Terms--Wireless ad hoc networks, medium access control, fairness

Jiang, Hai

285

Topology Control for Fault-Tolerant Communication in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Topology Control for Fault-Tolerant Communication in Wireless Ad Hoc Networks Bernd Thallner-generation wireless ad hoc networks, which are increasingly being considered also for critical application domains in a fully distributed ("ad hoc") manner. Increasingly, wireless ad hoc networks are also being considered

286

Novel "Smart Cube" Wireless Sensors with Embedded Processing/Communication/Power Core for "Smart  

E-Print Network [OSTI]

and measurement data. II. BACKGROUND DATA A. RFID Sensors The two responsibilities of wireless sensorsNovel "Smart Cube" Wireless Sensors with Embedded Processing/Communication/Power Core for "Smart presents a novel topology of isotropically radiating "smart cubes" for use in wireless sensors. The novelty

Tentzeris, Manos

287

Investigating the Energy Consumption of a Wireless Network Interface in an Ad Hoc Networking  

E-Print Network [OSTI]

Investigating the Energy Consumption of a Wireless Network Interface in an Ad Hoc Networking protocols re- quires knowledge of the energy consumption behavior of actual wireless interfaces. But little practical information is available about the energy consumption behavior of well-known wireless network

Sirer, Emin Gun

288

AN ASYMPTOTICALLY OPTIMAL APPROACH TO THE DISTRIBUTED ADAPTIVE TRANSMIT BEAMFORMING IN WIRELESS SENSOR NETWORKS  

E-Print Network [OSTI]

the plants on a field. As the transmission power of each single node is too weak to reach the distant]. A solution to synchronize carrier signals of distributed wireless nodes is virtual/cooperative MIMO for wireless sen- sor networks [1, 2, 3]. In virtual MIMO for wireless sensor networks, single antenna nodes

Beigl, Michael

289

Health Sciences Library Resources for Mobile Device Users Wireless Access for Mobile Devices  

E-Print Network [OSTI]

1 Health Sciences Library Resources for Mobile Device Users Wireless Access for Mobile Devices to configure your mobile device; instructions are available at http://www.usask.ca/ict/services/network-services/wireless/index.php - Assistance with accessing University services (such as wireless) on mobile devices is available from the ICT

Peak, Derek

290

File: Requesting Guest Wireless Access Page 1 of 2 April 2012 Technology Help Desk  

E-Print Network [OSTI]

File: Requesting Guest Wireless Access Page 1 of 2 April 2012 Technology Help Desk 412 624-HELP [4357] http://technology.pitt.edu Connecting to Guest Wireless Introduction This help sheet explains. For an overview of the request and approval process, please refer to the help sheet titled Guest Wireless Access

Jiang, Huiqiang

291

Energy-aware Broadcasting in Wireless Networks Ioannis Papadimitriou, Leonidas Georgiadis  

E-Print Network [OSTI]

Energy-aware Broadcasting in Wireless Networks Ioannis Papadimitriou, Leonidas Georgiadis Abstract a wireless network [1]. In this paper we address the problem of energy-aware broadcasting in wireless use batteries and, hence, it is im- portant to conserve energy individually, so that they remain op

Paris-Sud XI, Universit de

292

Wireless Technology in Industrial Networks Andreas Willig, Member, IEEE, Kirsten Matheus, Member, IEEE, Adam Wolisz, Senior  

E-Print Network [OSTI]

of existing wireless technologies for this specific field of applications, and iii) the creation of hybrid1 Wireless Technology in Industrial Networks Andreas Willig, Member, IEEE, Kirsten Matheus, Member), pp. 1130-1151 Abstract With the success of wireless technologies in consumer electronics, standard

Wichmann, Felix

293

A walk on the WILD side How wireless handhelds may change  

E-Print Network [OSTI]

A walk on the WILD side How wireless handhelds may change computer-supported collaborative learning arc likely to be organized around Wireless Internet Learning Devices (WILD) that resemble graphing calculators, Palm, or Pocket-PC handhelds, connected by short-range wireless networking. WILD learning

Paris-Sud XI, Université de

294

NeuDetect: A Neural Network Data Mining Wireless Network Intrusion Detection System  

E-Print Network [OSTI]

NeuDetect: A Neural Network Data Mining Wireless Network Intrusion Detection System C.I. Ezeife wireless intrusion detection systems, this paper presents a method of applying artificial neural networks mining clas- sification technique to wireless network intrusion detection system. The proposed system

Ezeife, Christie

295

Energy-Conservation Clustering Protocol based on Heat Conductivity for Wireless Sensor Networks  

E-Print Network [OSTI]

-sensors based on MEMS (Micro-Electro-Mechanical Systems) technology. A wireless sensor network is composedEnergy-Conservation Clustering Protocol based on Heat Conductivity for Wireless Sensor Networks critical issues in wireless sensor networks is energy efficiency because of the limited energy network

Landfeldt, Bjorn

296

Using Micro-Genetic Algorithms to Improve Localization in Wireless Sensor Networks  

E-Print Network [OSTI]

Using Micro-Genetic Algorithms to Improve Localization in Wireless Sensor Networks Vincent Tam methods, micro- genetic algorithms, distance measures. I. INTRODUCTION A wireless sensor network of Hong Kong, Hong Kong. Email: {vtam, kycheng, kslui}@eee.hku.hk Abstract-- Wireless sensor networks

Tam, Vincent W. L.

297

An Asynchronous Event-Driven Data Transmitter for Wireless ECG Sensor Nodes  

E-Print Network [OSTI]

An Asynchronous Event-Driven Data Transmitter for Wireless ECG Sensor Nodes Andre L. Mansano for wireless ECG sensors node. Unlike current solutions for ECG monitoring with autonomous wireless sensors, we propose an asynchronous method to transmit data from an ECG front-end, which is designed with a 2-bit

Serdijn, Wouter A.

298

Light extraction from organic light-emitting diodes for lighting applications by sand-blasting  

E-Print Network [OSTI]

Light extraction from organic light-emitting diodes for lighting applications by sand@ust.hk Abstract: Light extraction from organic light-emitting diodes (OLEDs) by scattering the light is one of the effective methods for large-area lighting applications. In this paper, we present a very simple and cost

299

Invited Paper Optical Wireless Applications -A Solution to Ease the Wireless  

E-Print Network [OSTI]

; for communications, sensing, navigation, positioning, surveillance, and imaging. Keywords: Light Emitting Diode Emitting Diode (LED) is considered to be the future primary lighting source for buildings, automobiles a far greater bandwidth. This means new devices and systems have to be developed. Semiconductor Light

Kavehrad, Mohsen

300

SMART LIGHTING SYSTEMS ULTIMATE LIGHTING The Smart Lighting  

E-Print Network [OSTI]

Integration (Holistic Integrated Design) · Sensors as important as LEDs · Interconnected systems (human, building, grid) · Artistic Design Freedom · Lighting is Health, Entertainment, Information and Illumination Cost at any brightness · Chip level integrated electronics THE ERC RESEARCH COVERS THE ENTIRE SUPPLY

Linhardt, Robert J.

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

A Survey of Wireless Communications for the Electric Power System  

SciTech Connect (OSTI)

A key mission of the U.S. Department of Energy (DOE) Office of Electricity Delivery and Energy Reliability (OE) is to enhance the security and reliability of the nations energy infrastructure. Improving the security of control systems, which enable the automated control of our energy production and distribution, is critical for protecting the energy infrastructure and the integral function that it serves in our lives. The DOE-OE Control Systems Security Program provides research and development to help the energy industry actively pursue advanced security solutions for control systems. The focus of this report is analyzing how, where, and what type of wireless communications are suitable for deployment in the electric power system and to inform implementers of their options in wireless technologies. The discussions in this report are applicable to enhancing both the communications infrastructure of the current electric power system and new smart system deployments. The work described in this report includes a survey of the following wireless technologies: IEEE 802.16 d and e (WiMAX) IEEE 802.11 (Wi-Fi) family of a, b, g, n, and s Wireless sensor protocols that use parts of the IEEE 802.15.4 specification: WirelessHART, International Society of Automation (ISA) 100.11a, and Zigbee The 2, 3, and 4 generation (G )cellular technologies of GPRS/EDGE/1xRTT, HSPA/EVDO, and Long-Term Evolution (LTE)/HSPA+UMTS.

Akyol, Bora A.; Kirkham, Harold; Clements, Samuel L.; Hadley, Mark D.

2010-01-27T23:59:59.000Z

302

Arnold Schwarzenegger LIGHTING RESEARCH PROGRAM  

E-Print Network [OSTI]

Project Summaries ELEMENT 2: ADVANCE LIGHTING TECHNOLOGIES PROJECT 2.1 LIGHT EMITTING DIODE (LED light emitting diodes (LED) technology for general lighting applications by developing a task lamp

303

New Light Sources for Tomorrow's Lighting Designs  

E-Print Network [OSTI]

, pioneered for headlam~for the automotive industry, has led to the development of halo en capsule lamps for general lighting. The original90-watt family PAR 38 lamps using tungsten halogen capsules produces the sa amount of useful light in the beam as a I... quartz PAR lamps with similar benefi . Each of these tungsten halogen capsule PAR wattages are av ilable in narrow spot, spot, and flood beam patterns. The most recent developments in the PAR halogen psule family include two entirely new lamp designs...

Krailo, D. A.

304

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS), hosted by Associate Laboratory Director for Light Sources, Stephen Dierker. The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviolet, and x-ray light for basic and applied research in physics, chemistry, medicine, geophysics, environmental, and materials sciences.

BNL

2009-09-01T23:59:59.000Z

305

LED Lighting Retrofit  

E-Print Network [OSTI]

? Municipal Street Lighting Consortium ? American Public Power Association (APPA) ? Demonstration in Energy Efficiency Development (DEED) ? Source of funding and database of completed LED roadway projects 6 Rules of the Road ESL-KT-11-11-57 CATEE 2011..., 2011 ? 9 Solar-Assisted LED Case Study LaQuinta Hotel, Cedar Park, Texas ? Utilizes 18 - ActiveLED Solar-Assisted Parking Lot Lights ? Utilizes ?power management? to extend battery life while handling light output ? Reduces load which reduces PV...

Shaw-Meadow, N.

2011-01-01T23:59:59.000Z

306

High efficiency incandescent lighting  

DOE Patents [OSTI]

Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

2014-09-02T23:59:59.000Z

307

Total Light Management  

Broader source: Energy.gov [DOE]

Presentation covers total light management, and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

308

Lighting Technology Panel  

Broader source: Energy.gov [DOE]

Presentation covers theLighting Technology Panel for the Federal Utility Partnership Working Group (FUPWG) meeting, held onNovember 18-19, 2009.

309

Comparing Light Bulbs  

Broader source: Energy.gov [DOE]

In this exercise, students will use a light to demonstrate the difference between being energy-efficient and energy-wasteful, and learn what energy efficiency means.

310

Solid-State Lighting  

Broader source: Energy.gov (indexed) [DOE]

research and design. Quality LED luminaires require program designed to successfully move solid-state lighting precise design of several components -LED arrays, electronic into the...

311

A Wireless Sensor Network Air Pollution Monitoring System  

E-Print Network [OSTI]

Sensor networks are currently an active research area mainly due to the potential of their applications. In this paper we investigate the use of Wireless Sensor Networks (WSN) for air pollution monitoring in Mauritius. With the fast growing industrial activities on the island, the problem of air pollution is becoming a major concern for the health of the population. We proposed an innovative system named Wireless Sensor Network Air Pollution Monitoring System (WAPMS) to monitor air pollution in Mauritius through the use of wireless sensors deployed in huge numbers around the island. The proposed system makes use of an Air Quality Index (AQI) which is presently not available in Mauritius. In order to improve the efficiency of WAPMS, we have designed and implemented a new data aggregation algorithm named Recursive Converging Quartiles (RCQ). The algorithm is used to merge data to eliminate duplicates, filter out invalid readings and summarise them into a simpler form which significantly reduce the amount of dat...

Khedo, Kavi K; Mungur, Avinash; Mauritius, University of; Mauritius,; 10.5121/ijwmn.2010.2203

2010-01-01T23:59:59.000Z

312

OpenGL Lighting 13. OpenGL Lighting  

E-Print Network [OSTI]

OpenGL Lighting 13. OpenGL Lighting · Overview of Lighting in OpenGL In order for lighting to have an effect in OpenGL, two things are required: A light An object to be lit Lights can be set to any color determine how they reflect the light which hits them. The color(s) of an object is determined

McDowell, Perry

313

Time Synchronization in Hierarchical TESLA Wireless Sensor Networks  

SciTech Connect (OSTI)

Time synchronization and event time correlation are important in wireless sensor networks. In particular, time is used to create a sequence events or time line to answer questions of cause and effect. Time is also used as a basis for determining the freshness of received packets and the validity of cryptographic certificates. This paper presents secure method of time synchronization and event time correlation for TESLA-based hierarchical wireless sensor networks. The method demonstrates that events in a TESLA network can be accurately timestamped by adding only a few pieces of data to the existing protocol.

Jason L. Wright; Milos Manic

2009-08-01T23:59:59.000Z

314

A simulation model for the lifetime of wireless sensor networks  

E-Print Network [OSTI]

In this paper we present a model for the lifetime of wireless sensor networks. The model takes into consideration several parameters such as the total number of sensors, network size, percentage of sink nodes, location of sensors, the mobility of sensors, and power consumption. A definition of the life time of the network based on three different criteria is introduced; percentage of available power to total power, percentage of alive sensors to total sensors, and percentage of alive sink sensors to total sink sensors. A Matlab based simulator is developed for the introduced model. A number of wireless sensor networks scenarios are presented and discussed.

Elleithy, Abdelrahman

2012-01-01T23:59:59.000Z

315

Light intensity compressor  

DOE Patents [OSTI]

In a system for recording images having vastly differing light intensities over the face of the image, a light intensity compressor is provided that utilizes the properties of twisted nematic liquid crystals to compress the image intensity. A photoconductor or photodiode material that is responsive to the wavelength of radiation being recorded is placed adjacent a layer of twisted nematic liquid crystal material. An electric potential applied to a pair of electrodes that are disposed outside of the liquid crystal/photoconductor arrangement to provide an electric field in the vicinity of the liquid crystal material. The electrodes are substantially transparent to the form of radiation being recorded. A pair of crossed polarizers are provided on opposite sides of the liquid crystal. The front polarizer linearly polarizes the light, while the back polarizer cooperates with the front polarizer and the liquid crystal material to compress the intensity of a viewed scene. Light incident upon the intensity compressor activates the photoconductor in proportion to the intensity of the light, thereby varying the field applied to the liquid crystal. The increased field causes the liquid crystal to have less of a twisting effect on the incident linearly polarized light, which will cause an increased percentage of the light to be absorbed by the back polarizer. The intensity of an image may be compressed by forming an image on the light intensity compressor.

Rushford, Michael C. (Livermore, CA)

1990-01-01T23:59:59.000Z

316

Splayed mirror light pipes  

SciTech Connect (OSTI)

An expression is given for the transmission of the rectangular-section mirror light pipe. The expression is used to model throughputs for simulated solar conditions over a calender year. It is found that the splaying of a mirror light pipe results in a significant increase in throughputs particularly in winter months. (author)

Swift, P.D. [School of Physical Sciences, Dublin City University, Dublin 9 (Ireland)

2010-02-15T23:59:59.000Z

317

Explosively pumped laser light  

DOE Patents [OSTI]

A single shot laser pumped by detonation of an explosive in a shell casing. The shock wave from detonation of the explosive causes a rare gas to luminesce. The high intensity light from the gas enters a lasing medium, which thereafter outputs a pulse of laser light to disable optical sensors and personnel.

Piltch, Martin S. (Los Alamos, NM); Michelotti, Roy A. (Los Alamos, NM)

1991-01-01T23:59:59.000Z

318

Reducing home lighting expenses  

SciTech Connect (OSTI)

Ways to reduce lighting expenses are summarized. These include: turning off lights when not in use; keeping fixtures and lamps clean; replacing lamps with more efficient types; using three-way bulbs; use of daylighting; buying fewer lamps and reducing lamp wattage; consider repainting rooms; replacing recessed fixtures with tracklighting; and using efficient lamps for outdoor use. (MCW)

Aimone, M.A.

1981-02-01T23:59:59.000Z

319

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS  

E-Print Network [OSTI]

VIRTUAL LIGHT: DIGITALLY-GENERATED LIGHTING FOR VIDEO CONFERENCING APPLICATIONS Andrea Basso method to improve the lighting conditions of a real scene or video sequence. In particular we concentrate on modifying real light sources intensities and inserting virtual lights into a real scene viewed from a fixed

Fisher, Kathleen

320

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Reflectance Model how objects reflect light. Model light sources Algorithms for computing Shading: computing intensities within polygons Determine what light strikes what

Jacobs, David

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Wireless sensor networks and environmental monitoring applications  

E-Print Network [OSTI]

by the Human Resources and Mobility program of the European community (MEST-CT-2004-505079) #12;ULB Machine Radio: 4kbps, 180m Sensors: Light and accelerometer Energy: Solar powered Golem and deputy dust 16mm3 ­ Remote or non invasive monitoring ·... #12;Solbosch greenhouses ·Greenhouses used by different research

Le Borgne, Yann-Aël

322

Ultra-High Temperature Distributed Wireless Sensors  

SciTech Connect (OSTI)

Research was conducted towards the development of a passive wireless sensor for measurement of temperature in coal gasifiers and coal-fired boiler plants. Approaches investigated included metamaterial sensors based on guided mode resonance filters, and temperature-sensitive antennas that modulate the frequency of incident radio waves as they are re-radiated by the antenna. In the guided mode resonant filter metamaterial approach, temperature is encoded as changes in the sharpness of the filter response, which changes with temperature because the dielectric loss of the guided mode resonance filter is temperature-dependent. In the mechanically modulated antenna approach, the resonant frequency of a vibrating cantilever beam attached to the antenna changes with temperature. The vibration of the beam perturbs the electrical impedance of the antenna, so that incident radio waves are phase modulated at a frequency equal to the resonant frequency of the vibrating beam. Since the beam resonant frequency depends on temperature, a Doppler radar can be used to remotely measure the temperature of the antenna. Laboratory testing of the guided mode resonance filter failed to produce the spectral response predicted by simulations. It was concluded that the spectral response was dominated by spectral reflections of radio waves incident on the filter. Laboratory testing of the mechanically modulated antenna demonstrated that the device frequency shifted incident radio waves, and that the frequency of the re-radiated waves varied linearly with temperature. Radio wave propagation tests in the convection pass of a small research boiler plant identified a spectral window between 10 and 13 GHz for low loss propagation of radio waves in the interior of the boiler.

May, Russell; Rumpf, Raymond; Coggin, John; Davis, Williams; Yang, Taeyoung; O'Donnell, Alan; Bresnahan, Peter

2013-03-31T23:59:59.000Z

323

WIRELESS MINE-WIDE TELECOMMUNICATIONS TECHNOLOGY  

SciTech Connect (OSTI)

A comprehensive mine-wide, two-way wireless voice and data communication system for the underground mining industry was developed. The system achieves energy savings through increased productivity and greater energy efficiency in meeting safety requirements within mines. The mine-wide system is comprised of two interfaced subsystems: a through-the-earth communications system and an in-mine communications system. The mine-wide system permits two-way communication among underground personnel and between underground and surface personnel. The system was designed, built, and commercialized. Several systems are in operation in underground mines in the United States. The use of these systems has proven they result in considerable energy savings. A system for tracking the location of vehicles and people within the mine was also developed, built and tested successfully. Transtek's systems are being used by the National Institute of Occupational Safety and Health (NIOSH) in their underground mine rescue team training program. This project also resulted in a spin-off rescue team lifeline and communications system. Furthermore, the project points the way to further developments that can lead to a GPS-like system for underground mines allowing the use of autonomous machines in underground mining operations, greatly reducing the amount of energy used in these operations. Some products developed under this program are transferable to applications in fields other than mining. The rescue team system is applicable to use by first responders to natural, accidental, or terrorist-caused building collapses. The in-mine communications system can be installed in high-rise buildings providing in-building communications to security and maintenance personnel as well as to first responders.

Zvi H. Meiksin

2004-03-01T23:59:59.000Z

324

4178 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 60, NO. 12, DECEMBER 2012 An Inkjet-Printed Solar-Powered Wireless Beacon  

E-Print Network [OSTI]

--Active antennas, energy harvesting, flexible elec- tronics, harmonic balance, inkjet printing, solar antenna4178 IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, VOL. 60, NO. 12, DECEMBER 2012 An Inkjet, wireless beacon, wireless energy transfer, wireless identification. I. INTRODUCTION THE combination

Tentzeris, Manos

325

Green Light Pulse Oximeter  

DOE Patents [OSTI]

A reflectance pulse oximeter that determines oxygen saturation of hemoglobin using two sources of electromagnetic radiation in the green optical region, which provides the maximum reflectance pulsation spectrum. The use of green light allows placement of an oximetry probe at central body sites (e.g., wrist, thigh, abdomen, forehead, scalp, and back). Preferably, the two green light sources alternately emit light at 560 nm and 577 nm, respectively, which gives the biggest difference in hemoglobin extinction coefficients between deoxyhemoglobin, RHb, and oxyhemoglobin, HbO.sub.2.

Scharf, John Edward (Oldsmar, FL)

1998-11-03T23:59:59.000Z

326

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1997-01-01T23:59:59.000Z

327

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1997-06-24T23:59:59.000Z

328

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s.

Erskine, David J. (Oakland, CA)

1999-01-01T23:59:59.000Z

329

White light velocity interferometer  

DOE Patents [OSTI]

The invention is a technique that allows the use of broadband and incoherent illumination. Although denoted white light velocimetry, this principle can be applied to any wave phenomenon. For the first time, powerful, compact or inexpensive sources can be used for remote target velocimetry. These include flash and arc lamps, light from detonations, pulsed lasers, chirped frequency lasers, and lasers operating simultaneously in several wavelengths. The technique is demonstrated with white light from an incandescent source to measure a target moving at 16 m/s. 41 figs.

Erskine, D.J.

1999-06-08T23:59:59.000Z

330

Energy Efficient Multi-mode Operation for Networked Wireless Sensors  

E-Print Network [OSTI]

Energy Efficient Multi-mode Operation for Networked Wireless Sensors Shanchieh Jay Yang, Niranjan Krishnamurthi, Cory D. Cress and Moises Sudit Rochester Institute of Technology, Rochester, NY 14623 Abstract of research work, ranging from device en- gineering to network protocol design, have been initiated to address

Jay Yang, Shanchieh

331

Energy Optimization in Wireless Medical Systems Using Physiological Behavior  

E-Print Network [OSTI]

Energy Optimization in Wireless Medical Systems Using Physiological Behavior Hyduke Noshadi, Foad pressure sen- sors placed in each shoe, which cover the bottom of the entire foot, resulting in energy, Algorithm, Performance Keywords Wearable Medical Systems, Energy Optimization, Sensor Se- Permission to make

Potkonjak, Miodrag

332

An Energy-efficient Wireless Sensor Network for Precision Agriculture  

E-Print Network [OSTI]

of the application (periodic collection of sensor- data and energy efficiency). Soil monitoring application doesAn Energy-efficient Wireless Sensor Network for Precision Agriculture Herman Sahota Ratnesh Kumar layer is designed to save energy during the wake-up synchronization phase. The network layer is designed

Kumar, Ratnesh

333

LOCALIZATION AND ENERGY MODELING IN WIRELESS SENSOR Ali Shareef  

E-Print Network [OSTI]

enters a low-power state can potentially result in very large power savings. #12;ACKNOWLEDGMENTS I would components of a sensor node, including processors with emerging energy-saving features, wireless energy-saving strategies in WSN. For example, it can be demonstrated that by carefully selecting

Zhu, Yifeng

334

Topology Control in Wireless Ad Hoc and Sensor PAOLO SANTI  

E-Print Network [OSTI]

- works to reduce energy consumption, which is essential to extend the network operational time. The goal, with the purpose of maintaining some global graph property (e.g., connectivity) while reducing energy consumption and Phrases: Connectivity, Energy consumption, Sensor networks, Topol- ogy control, Wireless ad hoc networks 1

Chen, Yuanzhu Peter

335

Reliability Gain of Network Coding in Lossy Wireless Networks  

E-Print Network [OSTI]

Reliability Gain of Network Coding in Lossy Wireless Networks Majid Ghaderi Department of Computer that network coding improves network reliability by reducing the number of packet retransmissions in lossy networks. However, the extent of the reliability benefit of network coding is not known. This paper

Massachusetts at Amherst, University of

336

On the Reliability of Wireless Sensor Networks Communications  

E-Print Network [OSTI]

On the Reliability of Wireless Sensor Networks Communications Alexandre Mouradian and Isabelle Aug applications, which must meet time and reliability requirements. Works on the real-time ca- pability of WSNs have been proposed [1]. In this paper we propose to study the achievable reliability of WSNs, tacking

Paris-Sud XI, Université de

337

VEHICLE TRACKING USING MOBILE WIRELESS SENSOR NETWORKS DURING DYNAMIC LOAD  

E-Print Network [OSTI]

and put into service, engineers lack cost-effective methods for measuring the actual loads imposedVEHICLE TRACKING USING MOBILE WIRELESS SENSOR NETWORKS DURING DYNAMIC LOAD TESTING OF HIGHWAY in the understanding of vehicle-bridge interactions. Direct measurement of the complex coupling that naturally exists

Lynch, Jerome P.

338

Localized Minimum-Energy Broadcasting for Wireless Multihop Networks  

E-Print Network [OSTI]

tree. We then observe that, for very dense networks, it is more energy-efficient to reach more than oneLocalized Minimum-Energy Broadcasting for Wireless Multihop Networks with Directional Antennas, and Carmen M. Yago Abstract--There are a number of proposals to achieve energy-efficient broadcasting

Stojmenovic, Ivan

339

Minimum-Hot-Spot Query Trees for Wireless Sensor Networks  

E-Print Network [OSTI]

an energy- efficient query routing tree. (a) Energy harvesting for battery- less nodes for the (b) Voltree to the querying node. Energy-efficient query routing trees are needed in a plethora of systems such as PeopleMinimum-Hot-Spot Query Trees for Wireless Sensor Networks Georgios Chatzimilioudis Dept

Zeinalipour, Demetris

340

Energy Efficient Broadcast Routing in Static Ad Hoc Wireless Networks  

E-Print Network [OSTI]

such that the energy cost of the broadcast tree is minimized. Each node in the network is assumed to have a fixed level a broadcast tree such that the energy cost of the broadcast tree is minimized. We first prove that the problemEnergy Efficient Broadcast Routing in Static Ad Hoc Wireless Networks Deying Li, Xiaohua Jia

Jia, Xiaohua

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

TITLE: Wireless Multimedia Architectures and Applications DURATION: Half day  

E-Print Network [OSTI]

towers, and inventing new handesets, high-speed chips, and protocols. The goal of this tutorial that will provide data transmission speeds of several Mbps, which are needed for multimedia. We will present over wireless networks at low and varying transmission speeds, (b) adaptive decoding that will optimize

Furht, Borko

342

Everlast: Long-life, Supercapacitor-operated Wireless Sensor Node  

E-Print Network [OSTI]

Everlast: Long-life, Supercapacitor-operated Wireless Sensor Node Farhan Simjee and Pai H. Chou,phchou}@uci.edu ABSTRACT This paper describes a supercapacitor-operated, solar-powered wire- less sensor node called, Design Keywords Maximum power point tracking, supercapacitor, solar power, wire- less sensors 1

Chou, Pai H.

343

Lifetime Prediction for Supercapacitor-powered Wireless Sensor Nodes  

E-Print Network [OSTI]

Lifetime Prediction for Supercapacitor-powered Wireless Sensor Nodes Christian Renner, J step towards reaching this goal: It explores discharging-characteristics of supercapacitors, discusses-ion polymers, supercapacitors can last for 10 years or even more. Superca- pacitors do not need a complex

Turau, Volker

344

Deadline-aware Broadcasting in Wireless Networks with Network Coding  

E-Print Network [OSTI]

on time. Index Terms--Broadcasting, broadcast tree, network coding, energy efficiency, deadline, NP 19122 Department of Electrical & Computer Engineering, New Jersey Institute of Technology, Newark, NJ of transmissions, which improves the energy efficiency of wireless networks. On the other hand, delaying

Wu, Jie

345

Optimal Routing and Scheduling in Multihop Wireless Renewable Energy Networks  

E-Print Network [OSTI]

and networks that are powered by renewable energy sources like solar, wind, vibration etc. In fact, multi- ple to solar panels. In addition to solar, energy harvested from the wind through the use of micro-turbines [3 for powering wireless nodes in the near future. Use of renewable energy has advantages in terms of operation

Sarkar, Saswati

346

Software-related Energy Footprint of a Wireless Broadband Module  

E-Print Network [OSTI]

on the power consumption. This opens up for potential energy savings by creating better ap- plications Keywords 3G, Energy footprint, Power consumption, Wireless broad- band 1. INTRODUCTION The battery lifetime the energy consumption is an essential part of de- veloping new hardware components, it has been a neglected

347

Adaptive Sampling for Wireless Sensor Networks Rebecca M. Willett  

E-Print Network [OSTI]

net- work that can significantly reduce energy consumption. Under a piecewise smooth field assumption activating only n3/4 of the sensors in the net- work. This approach can save significant energy compared acquisition, and communication contribute significantly to the energy ex- penditure of wireless sensor

Willett, Rebecca

348

Saving Energy by Adjusting Transmission Power in Wireless Sensor Networks  

E-Print Network [OSTI]

and communication areas. Energy-efficient communication is an important issue in WSNs because of the limited power distributed algorithms to reduce communication energy consumption in WSNs by minimizing the total transmissionSaving Energy by Adjusting Transmission Power in Wireless Sensor Networks Xiao Chen Department

Rowe, Neil C.

349

Wireless Relay Networks for Green Environment Professor Zbigniew Dziong  

E-Print Network [OSTI]

of Technology, Poland, both in Electrical Engineering where he also worked as an Assistant Professor. From 1987 relay networks have been considered for 3GPP LTE and WiMax (IEEE 802.16j) technologies. The focus has of this presentation we address the issue from a different perspective. Namely, we consider how the wireless relay

Huang, Jianwei

350

Efficient Low Complexity Power Allocation Policies for Wireless Communication Systems  

E-Print Network [OSTI]

. Other benefits will be smaller diesel generators and batteries with longer life time. Thus, one of the primary challenges for Next Generation Networks (NGN) is to reduce energy consumption. In a BS the powerEfficient Low Complexity Power Allocation Policies for Wireless Communication Systems Guaranteeing

Sharma, Vinod

351

Reliable Packet Transmissions in Multipath Routed Wireless Networks  

E-Print Network [OSTI]

probability of packet loss (PPL) in wireless networks. Path diversification uses erasure codes and multiple this case blind load balancing. We show that for low PPL, blind load balancing outperforms single the fragments. We show how to distribute the fragments for minimized PPL, and maximized efficiency given a bound

Valaee, Shahrokh

352

Reliable Packet Transmissions in Multipath Routed Wireless Networks  

E-Print Network [OSTI]

loss (PPL) in wireless networks. Path diversification uses erasure codes and multiple paths. We show that for low PPL, blind load balancing outperforms single-path transmission. In the second how to distribute the fragments for minimized PPL, and maximized efficiency given a bound on PPL. We

Valaee, Shahrokh

353

SBA: A Simple Backoff Algorithm for Wireless Ad Hoc Networks  

E-Print Network [OSTI]

SBA: A Simple Backoff Algorithm for Wireless Ad Hoc Networks Tahiry RAZAFINDRALAMBO1 and Isabelle of ad hoc networks based on IEEE 802.11 DCF degrade when congestion increases. The issues concern SBA with IEEE 802.11 and several alternatives to 802.11 in ad hoc networks. We show that SBA achieves

Paris-Sud XI, Université de

354

Prediction and Management in Energy Harvested Wireless Sensor Nodes  

E-Print Network [OSTI]

: tajana@ucsd.edu Abstract--Solar panels are frequently used in wireless sensor nodes because they can with rechargeable energy storage (e.g. batteries and super capacitors). Many different types of energy harvesting as energy storage units and a solar panel for energy harvesting. Shimmer evaluates the health of a large

Simunic, Tajana

355

Spatial Energy Balancing in Large-scale Wireless Multihop Networks  

E-Print Network [OSTI]

Spatial Energy Balancing in Large-scale Wireless Multihop Networks Seung Jun Baek and Gustavo de is on optimizing trade-offs between the energy cost of spreading traffic and the improved spatial balance of energy. We propose a parameterized family of energy balancing strategies for grids and approximate

de Veciana, Gustavo

356

Wireless Network Interface Energy Conservation for Bottlenecked First Mile Networks  

E-Print Network [OSTI]

user using the limited upstream capacity of the home broad- band link. We analyze the behavior of two- posed by this behavior on a client side energy saving mechanism. We also describe techniques that allowWireless Network Interface Energy Conservation for Bottlenecked First Mile Networks Surendar

Chandra, Surendar

357

Optimizing Communication Energy Consumption in Perpetual Wireless Nanosensor Networks  

E-Print Network [OSTI]

Optimizing Communication Energy Consumption in Perpetual Wireless Nanosensor Networks Shahram}@cs.odu.edu Abstract--This paper investigates the effect of various param- eters of energy consumption. Finding the optimum combination of parameters to minimize energy consumption while satisfying the Qo

Weigle, Michele

358

Optimizing physical layer parameters for wireless sensor networks  

E-Print Network [OSTI]

#12;Abstract Wireless sensor networks utilize battery-operated nodes, and thus energy efficiency of Master of Science in Electrical and Computer Engineering University of Rochester Rochester, New York 2007 the University of Rochester from 2002 to 2006, and graduated with a Bachelor of Science in Electrical

Heinzelman, Wendi

359

Optimizing Physical Layer Parameters for Wireless Sensor Networks  

E-Print Network [OSTI]

relay distance and the optimal transmit energy as a function of channel noise level and path loss University of Economics and Technology, Ankara, TURKEY As wireless sensor networks utilize battery-operated nodes, energy efficiency is of paramount importance at all levels of system design. In order to save

Heinzelman, Wendi

360

Wireless service management solutions To support your business objectives  

E-Print Network [OSTI]

Improvecustomersupportand servicemanagement Improveservicequalityandeach customer'sexperience #12; Customers demand high requires a new focus on customer profitability and retention, and a complete understanding of how wire such as response time and availability of services -- and much more. Tivoli Netcool solutions for wireless provide

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Attack-Resilient Time Synchronization for Wireless Sensor Networks  

E-Print Network [OSTI]

Attack-Resilient Time Synchronization for Wireless Sensor Networks Hui Song, Sencun Zhu in sensor networks were not designed with security in mind, thus leaving them vulnerable to security attacks. In this paper, we first identify various attacks that are effective to several representative time

Yener, Aylin

362

BAAP: Blackhole Attack Avoidance Protocol for Wireless Network  

E-Print Network [OSTI]

BAAP: Blackhole Attack Avoidance Protocol for Wireless Network Saurabh Gupta Indian Institute infrastructure in adhoc net- work makes it vulnerable to various attacks. MANET routing disrupts attack is a blackhole attack in which malicious node falsely claiming itself as having the fresh

Dharmaraja, S.

363

University of Florida Cell Phone/Similar Wireless Communication Devices  

E-Print Network [OSTI]

University of Florida Cell Phone/Similar Wireless Communication Devices Reimbursement Request Form the appropriate box * Purchase Reimbursement:* Monthly Reimbursement:Cell Phone * Purchase Reimbursement:* Monthly than $150 per month. The purchase reimbursement limit for each device is $150.00 for cell phones

Sin, Peter

364

Signal Compression in Wireless Sensor By Marco F. Duarte1  

E-Print Network [OSTI]

sensor networks (WSNs) has been motivated by important applications such as climate change tracking is an important tool for reducing the communication costs and increasing the lifetime of wireless sensor network communication rate could be achieved. This, however, would require communication between the sensors or prior

365

Optical Wireless Multi-Spot Diffusing; a MIMO Configuration  

E-Print Network [OSTI]

.ed Abstract- Optical (infrared) wireless communications links offer an attractive solution for indoor is an attractive solution for indoor applications. The links operate on a vast frequency band (of about 300 THz and performance: noisy environment and eye-safety requirements. Daylight coming from windows, incan

Kavehrad, Mohsen

366

UCIT Data Network Standards Campus Wireless Network Standard  

E-Print Network [OSTI]

on the University of Calgary campuses, both inside buildings and outdoor areas. This standard does not apply Standard in buildings as the infrastructure is upgraded. All new AP deployments will be connected to 1 Gbps POE switches which will then be connected to the building head end switches. 4.3. Wireless Standard Wi

Habib, Ayman

367

Energy-Efficient Routing Schemes for Wireless Sensor Networks  

E-Print Network [OSTI]

1 Energy-Efficient Routing Schemes for Wireless Sensor Networks Maleq Khan Gopal Pandurangan Bharat spanning tree (MST) is the optimal data aggregation tree for energy-efficient rout- ing. We then study energy-efficient distributed algorithms for constructing MSTs. The GHS algorithm to construct MST has

Khan, Maleq

368

Evolving an Indoor Robotic Localization System Based on Wireless Networks  

E-Print Network [OSTI]

of indoor robotic localization. We investigate the design and building of an autonomous localization system provides the position of one robot in a space, as in a Cartesian plane, corroborating with the EvoEvolving an Indoor Robotic Localization System Based on Wireless Networks Gustavo Pessin1

Braun, Torsten

369

Utility-based Routing in Wireless Sensor Networks  

E-Print Network [OSTI]

Utility-based Routing in Wireless Sensor Networks Xiaoguang Li and Jie Wu Department of Computer the existing utility-based routing protocols for WSNs. We put them into sev- eral categories according to their utility properties, such as delay, cost, and packet delivery ratio. In addition, we will also cover

Wu, Jie

370

Leakage-Aware Energy Synchronization for Wireless Sensor Networks  

E-Print Network [OSTI]

Leakage-Aware Energy Synchronization for Wireless Sensor Networks Ting Zhu, Ziguo Zhong, Yu Gu-capacitor as the only energy storage unit. To efficiently use the harvested energy, we design and imple- ment leakage-aware con- trol can effectively utilize energy that could otherwise leak away. Nodes running leakage-aware

Zhang, Zhi-Li

371

Jamming-Aware Minimum Energy Routing in Wireless Networks  

E-Print Network [OSTI]

1 Jamming-Aware Minimum Energy Routing in Wireless Networks Azadeh Sheikholeslami, Majid Ghaderi; however, energy-aware routing in the presence of active adversary (jammers) has not been considered. We. There has been some study of energy-aware ad hoc routing protocols in the literature [13], [14], [15], [16

Goeckel, Dennis L.

372

Residual Energy-Aware Cooperative Transmission (REACT) in Wireless Networks  

E-Print Network [OSTI]

Residual Energy-Aware Cooperative Transmission (REACT) in Wireless Networks Erwu Liu, Qinqing Zhang the lifetime of the network and we call the selection method a residual energy-aware cooperative transmission- works, where energy efficiency is a critical design consideration. We assume that multiple relay nodes

Leung, Kin K.

373

Variable Latency Turbo Codes for Wireless Multimedia Applications  

E-Print Network [OSTI]

Variable Latency Turbo Codes for Wireless Multimedia Applications Matthew C. Valenti and Brian D acceptable latency and Bit Error Rate BER or Frame Error Rate FER. In turbo coded systems a tradeo between an adaptive turbo coding strategy for wire- less multimedia communications that incor- porates a set

Valenti, Matthew C.

374

Impact of Lossy Links on Performance of Multihop Wireless Networks  

E-Print Network [OSTI]

] study power-aware routing with renewable energy sources. Ephremides gives an overview on energy concerns Holte Department of Computing Science, University of Alberta, Edmonton, AB, Canada T6G 2E8 yuxi, harms wireless networks have energy constraints. Lossy links also affect energy efficiency due to retransmissions

Holte, Robert

375

Experimental Investigations into TCP Performance over Wireless Multihop Networks  

E-Print Network [OSTI]

, reliable and as automated as possible. The ex- perimental observations are subjected to a thorough. The cards were partially covered with copper tape to reduce their range, which enabled creation The performance of TCP over wireless networks has been stud- ied actively in the past few years. The observation

Kawadia, Vikas

376

Predictive Protocol Management with Contingency Planning for Wireless Sensor Networks  

E-Print Network [OSTI]

on enabling sensor and actuator connectivity without the use of wires. Energy consumption among the wireless of the WSN operational mode in order to optimize the energy utilization based on the time varying characteristics of the Radio-Frequency (RF) in which the network operates. I. INTRODUCTION Energy efficiency

Raja, Anita

377

Hindawi Publishing Corporation EURASIP Journal on Wireless Communications and Networking  

E-Print Network [OSTI]

of weights that dynamically accounts for both the experienced QoS and the transmission conditions. This new is properly cited. 1. Introduction Providing mobile multimedia transmission services with an adequate QoS is very challenging. In contrast with wired communications, wireless transmissions are subject to many

Boyer, Edmond

378

Wireless Networks manuscript No. (will be inserted by the editor)  

E-Print Network [OSTI]

to transmit such that the total cost (such as energy consumption or the number of transmissions) is minimized. In contrast to the wireless broadcast problems for minimizing the energy consumption and the number over all the transmissions (e.g., the transmission and reception energy, the price for accessing

Zhao, Qing

379

INTRODUCTION As wireless and portable mobile devices become  

E-Print Network [OSTI]

in WSNs, and discuss their pros and cons. WIRELESS ENERGY TRANSFER: HISTORY, CURRENT STATUS, AND RECENT, wind, vibrations, and ambient radio signals. Energy-harvesting tech- nologies are orthogonal to WPT the hassle of wires. WPT technolo- gies are revolutionizing the way energy is trans- ferred and have

Hou, Y. Thomas

380

Voice Quality Evaluation for Wireless Transmission with ROHC Stephan Rein  

E-Print Network [OSTI]

are the compression gain (reduction in header and total packet size), the voice quality, and the delay jit- terVoice Quality Evaluation for Wireless Transmission with ROHC Stephan Rein Dept. of Electrical Eng and the voice qualities using a wide array of objective voice quality met- rics including SNR metrics, spectral

Reisslein, Martin

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Integration of Groundwater Transport Models with Wireless Sensor Networks  

E-Print Network [OSTI]

~nigo Urteaga2 , Qi Han2 , Anura Jayasumana3 , Tissa Illangasekare1 1 Division of Environmental Sciences dynamic hydrological and environmental processes. As the wireless nodes are resource constrained, mass be conceptualized in the WSN context. INTRODUCTION As groundwater contamination is an established problem with many

Han, Qi "Chee"

382

The Power of Non-Uniform Wireless Power  

E-Print Network [OSTI]

The Power of Non-Uniform Wireless Power ETH Zurich ­ Distributed Computing Group Magnus M-To-Interference-Plus-Noise Ratio (SINR) Formula Minimum signal- to-interference ratio Power level of sender u Path-loss exponent Noise Distance between two nodes Received signal power from sender Received signal power from all other

383

Distributed and Efficient Classifiers for Wireless Audio-Sensor Networks  

E-Print Network [OSTI]

efficient in terms of communication overhead. Index Terms--Sensors, Acoustic Classification, Features Selec evaluation results in terms of classification ac- curacy and energy expenditure trade-offs. Finally, SectionDistributed and Efficient Classifiers for Wireless Audio-Sensor Networks Baljeet Malhotra

Nascimento, Mario A.

384

AN ENERGY BENCHMARK FOR SOFTWARE UPDATES ON WIRELESS SENSOR NODES  

E-Print Network [OSTI]

AN ENERGY BENCHMARK FOR SOFTWARE UPDATES ON WIRELESS SENSOR NODES S. Brown*, C.J. Sreenan *Dept, Modelling, Energy, Benchmark. Abstract Energy consumption is arguably the key factor in the design not consume a significant fraction of a WSN's energy reserve; also, the required consumption must be known

Sreenan, Cormac J.

385

Mobility Management in Next-Generation Wireless Systems  

E-Print Network [OSTI]

; revised May 19, 1999. This work was supported by the Department of Defense (DoD), National Security Agency asynchronous transfer mode (ATM), and satellite networks. The integration of these networks will be discussed by a discussion of proposed protocols for wireless ATM and satellite networks. Finally, an outline of open

Wang, Wenye

386

Short-Term Solar Energy Forecasting Using Wireless Sensor Networks  

E-Print Network [OSTI]

Short-Term Solar Energy Forecasting Using Wireless Sensor Networks Stefan Achleitner, Tao Liu an advantage for output power prediction. Solar Energy Prediction System Our prediction model is based variability of more then 100 kW per minute. For practical usage of solar energy, predicting times of high

Cerpa, Alberto E.

387

Video Source Identification in Lossy Wireless Networks Shaxun Chen  

E-Print Network [OSTI]

Video Source Identification in Lossy Wireless Networks Shaxun Chen , Amit Pande , Kai Zeng@ucdavis.edu, kzeng@umich.edu, pmohapatra@ucdavis.edu Abstract-- Video source identification is very important in valida- ting video evidence, tracking down video piracy crimes and regu- lating individual video sources

California at Davis, University of

388

Directed Budget-Based Clustering for Wireless Sensor Networks  

E-Print Network [OSTI]

Directed Budget-Based Clustering for Wireless Sensor Networks Leonidas Tzevelekas National, distributed and energy efficient network self- organization. Budget-based clustering approaches have recently been proposed for this purpose, by specifying rules for distribut- ing a given budget of tokens

Stavrakakis, Ioannis

389

Greenpass RADIUS Tools for Delegated Authorization in Wireless Networks  

E-Print Network [OSTI]

, New Hampshire June 3, 2004 Examining Committee: ____________________________ Sean Smith (chair. Folt Dean of Graduate Studies #12;#12;ii Abstract* Dartmouth's Greenpass project extends how public key cryptography can be used to secure the wireless LAN with a RADIUS (Remote Authentication Dial In User Service

390

Invited Paper: Wireless Sensor Networks for Ecosystem Monitoring & Port Surveillance  

E-Print Network [OSTI]

Invited Paper: Wireless Sensor Networks for Ecosystem Monitoring & Port Surveillance A. Mansour*1 of the most up-to-date innovations in sensor technology and sensor networks, our current project should as well as the second phase of the project which consists in analyzing living underwater micro

Paris-Sud XI, Université de

391

Energy Efficient Scheduling with Power Control for Wireless Networks  

E-Print Network [OSTI]

Energy Efficient Scheduling with Power Control for Wireless Networks Bastian Katz Institute the complexity of scheduling with power control in the SINRG model of interference. Based on a novel scheme) and less energy consumption: power control admits schedules that would otherwise violate interference

Paris-Sud XI, Université de

392

Mercury/Waterfilling for Fixed Wireless OFDM Angel Lozano  

E-Print Network [OSTI]

Mercury/Waterfilling for Fixed Wireless OFDM Systems Angel Lozano Bell Labs (Lucent Technologies- mation is then given by the more general mercury/waterfilling policy. This paper illustrates the usance of mercury/waterfilling on frequency-selective OFDM channels with QAM constellations and it quantifies

Verdú, Sergio

393

An EAP ID-Based Authentication Method for Wireless Networks  

E-Print Network [OSTI]

(Certification Author- ity) and the burdensome management of certificates is removed. The presented) into IEEE 802 wired networks. It gave also birth to the IEEE 802.11i [2] which is more specific to wireless between two stations or a signature mechanism that lies on certificates to prove the ownership of a public

Paris-Sud XI, Université de

394

Graphene Enhanced Wireless Sensors Taoran Le, Trang Thai, Vasileios Lakafosis,  

E-Print Network [OSTI]

Graphene Enhanced Wireless Sensors Taoran Le, Trang Thai, Vasileios Lakafosis, Manos Tentzeris utilizing both analog and digital principles. The sensors will utilize Graphene-based thin films integrated. Our thin films are produced from water-based, inkjet printed graphene oxide (GO) on paper

Tentzeris, Manos

395

A New Compact Multichannel Receiver for Underwater Wireless Communication Networks  

E-Print Network [OSTI]

size of the proposed receiver makes it particularly useful for small unmanned underwater vehicles1 A New Compact Multichannel Receiver for Underwater Wireless Communication Networks Ali Abdi of the particle velocity, in addition to the pressure, multichannel reception can be accomplished in underwater

Abdi, Ali

396

"Developing `smart' algorithms for medical and wireless technologies to  

E-Print Network [OSTI]

, including medical devices for the treatment of diabetes, resource management in wireless systems, and network traffic engineering. In conjunction with the UVa Center for Diabetes Technology, our group has contributed to the development of algorithms for closed-loop and advisory mode control of type 1 diabetes, i

Acton, Scott

397

Wireless Roadside Inspection Proof-of-Concept Test  

E-Print Network [OSTI]

Wireless Roadside Inspection Proof-of-Concept Test Phase 1A ­ Generating SDMS PeopleNet, a producer Message Set (SDMS). Data obtained during a 10-hour test was compared to similar data obtained through. DESCRIPTIONRESULTS The majority of the data obtained from the PeopleNet SDMS was accurate. However, the tested system

398

An Environmental Monitoring System with Integrated Wired and Wireless Sensors  

E-Print Network [OSTI]

environmental monitoring cyber infrastruc- ture that features (1) soil moisture monitoring with flexible spatial Environmental Observatory (TEO) infrastructure [9] for long-term operation. The new WSN-based soil moistureAn Environmental Monitoring System with Integrated Wired and Wireless Sensors Jue Yang, Chengyang

Huang, Yan

399

Optimal Power Allocation in Channel-Coded Wireless Sudarshan Vasudevan  

E-Print Network [OSTI]

energy. However, for many communication links, such as those employing turbo codes or sequentially transmitted RF power for receiver decoder power can result in significant improvements in overall energy transmission. The gains are particularly pronounced in wireless networks with asymmetric power costs. 1

Massachusetts at Amherst, University of

400

Optimal Power Allocation in ChannelCoded Wireless Sudarshan Vasudevan  

E-Print Network [OSTI]

, while considering both transmitter circuit and signal energy. However, for many communication links in significant improvements in overall energy consumption or network lifetime versus schemes that always employ networks with asymmetric power costs. 1 Introduction Wireless ad hoc networks and, in particular, sensor

Massachusetts at Amherst, University of

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Optimal Power Allocation in ChannelCoded Wireless Sudarshan Vasudevan  

E-Print Network [OSTI]

energy. However, for many communication links, such as those employing turbo codes or sequentially transmitted RF power for receiver decoder power can result in significant improvements in overall energy transmission. The gains are particularly pronounced in wireless networks with asymmetric power costs. 1

Massachusetts at Amherst, University of

402

Optimal Power Allocation in Channel-Coded Wireless Sudarshan Vasudevan  

E-Print Network [OSTI]

, while considering both transmitter circuit and signal energy. However, for many communication links in significant improvements in overall energy consumption or network lifetime versus schemes that always employ networks with asymmetric power costs. 1 Introduction Wireless ad hoc networks and, in particular, sensor

Massachusetts at Amherst, University of

403

An Ultra-Wearable, Wireless, Low Power ECG Monitoring System  

E-Print Network [OSTI]

An Ultra-Wearable, Wireless, Low Power ECG Monitoring System Chulsung Park and Pai H. Chou., Suite 107 San Diego, CA 92121, USA Abstract-- Wearable electrocardiograph (ECG) monitoring systems today performance to gold standard ECG electrodes, has been developed. This paper presents a description

Shinozuka, Masanobu

404

Conditional Random Fields for Morphological Analysis of Wireless ECG Signals  

E-Print Network [OSTI]

Conditional Random Fields for Morphological Analysis of Wireless ECG Signals Annamalai Natarajan recording of ECG signals. This capability has diverse applications in the study of human health and behavior present a novel approach to the problem of extracting the morphological structure of ECG signals based

Massachusetts at Amherst, University of

405

Wireless Multimedia Sensor Network for plant disease detections  

E-Print Network [OSTI]

of the techniques may be used is image processing through the deployment of WMSN in the cultivated field. However, transmitting massive image data wirelessly will increase significantly network traffic and particularly energy been deployed on the farmland, the inspector only needs to distinguish crop images on the computer

Paris-Sud XI, Université de

406

Underground Coal Mine Monitoring with Wireless Sensor Networks  

E-Print Network [OSTI]

10 Underground Coal Mine Monitoring with Wireless Sensor Networks MO LI and YUNHAO LIU Hong Kong University of Science and Technology Environment monitoring in coal mines is an important application queries under instable circumstances. A prototype is deployed with 27 mica2 motes in a real coal mine. We

Liu, Yunhao

407

Lakeview Light and Power- Commercial Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Lakeview Light and Power offers a commercial lighting rebate program. Rebates apply to the installation of energy efficient lighting retrofits in non-residential buildings. The rebate program is...

408

Light Vector Mesons  

E-Print Network [OSTI]

This article reviews the current status of experimental results obtained in the measurement of light vector mesons produced in proton-proton and heavy ion collisions at different energies. The review is focused on two phenomena related to the light vector mesons; the modification of the spectral shape in search of Chiral symmetry restoration and suppression of the meson production in heavy ion collisions. The experimental results show that the spectral shape of light vector mesons are modified compared to the parameters measured in vacuum. The nature and the magnitude of the modification depends on the energy density of the media in which they are produced. The suppression patterns of light vector mesons are different from the measurements of other mesons and baryons. The mechanisms responsible for the suppression of the mesons are not yet understood. Systematic comparison of existing experimental results points to the missing data which may help to resolve the problem.

Alexander Milov

2008-12-21T23:59:59.000Z

409

National Synchrotron Light Source  

ScienceCinema (OSTI)

A tour of Brookhaven's National Synchrotron Light Source (NSLS). The NSLS is one of the world's most widely used scientific research facilities, hosting more than 2,500 guest researchers each year. The NSLS provides intense beams of infrared, ultraviole

None

2010-01-08T23:59:59.000Z

410

Efficient Light Sources Today  

E-Print Network [OSTI]

This paper reviews new lamp and lighting technology in terms of application and economic impact. Included are the latest advances in High Intensity Discharge systems, energy saving fluorescent lamps and ballasts, and the new state of the art high...

Hart, A. L.

1982-01-01T23:59:59.000Z

411

Natural lighting and skylights  

E-Print Network [OSTI]

outlined herein, the feasibility of using scale models for studying skylights is also an established fact. The method of analysis by models can be a valuable tool to any designer who is concerned about day-lighting....

Evans, Benjamin Hampton

1961-01-01T23:59:59.000Z

412

Reading Municipal Light Department- Business Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Reading Municipal Light Department (RMLD) offers incentives for non-residential customers to install energy efficient lights and sensors in existing facilities. In addition to rebates for the...

413

Types of Lighting in Commercial Buildings - Lighting Characteristics  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

of a light source's accuracy in rendering different colors when compared to a reference light source. The highest attainable CRI is 100. Lamps with CRIs above 70 are...

414

Columbia Water and Light- HVAC and Lighting Efficiency Rebates  

Broader source: Energy.gov [DOE]

Columbia Water and Light (CWL) offers rebates to its commercial and industrial customers for the purchase of high efficiency HVAC installations and efficient lighting. Incentives for certain...

415

Induction Lighting: An Old Lighting Technology Made New Again...  

Broader source: Energy.gov (indexed) [DOE]

around the same time that his rival, Thomas Edison, was working to improve the incandescent light bulb. In the early 1990s, several major lighting manufacturers introduced...

416

Peninsula Light Company- Commercial Efficient Lighting Rebate Program  

Broader source: Energy.gov [DOE]

Peninsula Light Company (PLC) offers a rebate program for commercial customers who wish to upgrade to energy efficient lighting. Participating customers must be served by PLC commercial service....

417

Wireless Roadside Inspection Proof of Concept Test Final Report  

SciTech Connect (OSTI)

The U.S. Department of Transportation (DOT) FMCSA commissioned the Wireless Roadside Inspection (WRI) Program to validate technologies and methodologies that can improve safety through inspections using wireless technologies that convey real-time identification of commercial vehicles, drivers, and carriers, as well as information about the condition of the vehicles and their drivers. It is hypothesized that these inspections will: -- Increase safety -- Decrease the number of unsafe commercial vehicles on the road; -- Increase efficiency -- Speed up the inspection process, enabling more inspections to occur, at least on par with the number of weight inspections; -- Improve effectiveness -- Reduce the probability of drivers bypassing CMV inspection stations and increase the likelihood that fleets will attempt to meet the safety regulations; and -- Benefit industry -- Reduce fleet costs, provide good return-on-investment, minimize wait times, and level the playing field. The WRI Program is defined in three phases which are: Phase 1: Proof of Concept Test (POC) Testing of commercially available off-the-shelf (COTS) or near-COTS technology to validate the wireless inspection concept. Phase 2: Pilot Test Safety technology maturation and back office system integration Phase 3: Field Operational Test Multi-vehicle testing over a multi-state instrumented corridor This report focuses on Phase 1 efforts that were initiated in March, 2006. Technical efforts dealt with the ability of a Universal Wireless Inspection System (UWIS) to collect driver, vehicle, and carrier information; format a Safety Data Message Set from this information; and wirelessly transmit a Safety Data Message Set to a roadside receiver unit or mobile enforcement vehicle.

Capps, Gary J [ORNL; Franzese, Oscar [ORNL; Knee, Helmut E [ORNL; Plate, Randall S [ORNL; Lascurain, Mary Beth [ORNL

2009-03-01T23:59:59.000Z

418

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Yuan, Thomas; Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald

2010-10-26T23:59:59.000Z

419

Solid state lighting component  

DOE Patents [OSTI]

An LED component comprising an array of LED chips mounted on a planar surface of a submount with the LED chips capable of emitting light in response to an electrical signal. The LED chips comprise respective groups emitting at different colors of light, with each of the groups interconnected in a series circuit. A lens is included over the LED chips. Other embodiments can comprise thermal spreading structures included integral to the submount and arranged to dissipate heat from the LED chips.

Keller, Bernd; Ibbetson, James; Tarsa, Eric; Negley, Gerald; Yuan, Thomas

2012-07-10T23:59:59.000Z

420

Commercial Mobile Alerting System (CMAS) CMAS is the system interface to the Wireless Emergency Alerts (WEA) service that wireless carriers  

E-Print Network [OSTI]

Commercial Mobile Alerting System (CMAS) CMAS is the system interface to the Wireless Emergency Presidential, AMBER, and Imminent Threat alerts to mobile phones using cell broadcast technology mobile devices with CMAS/WEA capability included. While not all handsets now on the market are capable

Meyers, Steven D.

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

3360 IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 12, NO. 7, JULY 2013 Wireless Mesh Network in Smart Grid: Modeling  

E-Print Network [OSTI]

in Smart Grid: Modeling and Analysis for Time Critical Communications Yi Xu, Member, IEEE, and Wenye Wang, Senior Member, IEEE Abstract--Communication networks are an indispensable com- ponent in the smart grid that are located distributively in the grid. In particular, wireless networks will be deployed widely in the smart

Wang, Wenye

422

Light and Energy -Daylight measurements  

E-Print Network [OSTI]

Light and Energy - Daylight measurements #12;Light and Energy - Daylight measurements Authors: Jens;3 Title Light and Energy Subtitle Daylight measurements Authors Jens Christoffersen, Ásta Logadóttir ........................................................................................................ 5 Daylight quantity

423

Energy Conservation in Industrial Lighting  

E-Print Network [OSTI]

In order to reduce energy use in lighting Union Carbide recently issued drastically reduced new lighting level standards. A computerized lighting cost program was also developed. Using this program a number of additional energy saving techniques...

Meharg, E.

1979-01-01T23:59:59.000Z

424

Lighting and the Bottom Line  

E-Print Network [OSTI]

A discussion of the cost of light and how it relates to the cost of people. The new Illuminating Engineering Society recommended method of determining lighting levels will be explained. Also several ways of providing good lighting to increase...

Christensen, M.

1981-01-01T23:59:59.000Z

425

Light diffusing fiber optic chamber  

DOE Patents [OSTI]

A light diffusion system for transmitting light to a target area. The light is transmitted in a direction from a proximal end to a distal end by an optical fiber. A diffusing chamber is operatively connected to the optical fiber for transmitting the light from the proximal end to the distal end and transmitting said light to said target area. A plug is operatively connected to the diffusing chamber for increasing the light that is transmitted to the target area.

Maitland, Duncan J. (Lafayette, CA)

2002-01-01T23:59:59.000Z

426

Design and initial deployment of the wireless local area networking infrastructure at Sandia National Laboratories.  

SciTech Connect (OSTI)

A major portion of the Wireless Networking Project at Sandia National Laboratories over the last few years has been to examine IEEE 802.11 wireless networking for possible use at Sandia and if practical, introduce this technology. This project team deployed 802.11a, b, and g Wireless Local Area Networking at Sandia. This report examines the basics of wireless networking and captures key results from project tests and experiments. It also records project members thoughts and designs on wireless LAN architecture and security issues. It documents some of the actions and milestones of this project, including pilot and production deployment of wireless networking equipment, and captures the team's rationale behind some of the decisions made. Finally, the report examines lessons learned, future directions, and conclusions.

Long, John P.; Hamill, Michael J.; Mitchell, M. G.; Miller, Marc M.; Witzke, Edward L.; Wiener, Dallas J

2006-11-01T23:59:59.000Z

427

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network [OSTI]

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

428

Efficiency Maine Residential Lighting Program  

Broader source: Energy.gov [DOE]

Efficiency Maine's Residential Lighting Program works directly with retailers and manufacturers to encourage residential customers to purchase energy-efficient lighting. Rebate amounts average $1...

429

AdHoc Probe: End-to-end Capacity Probing in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

AdHoc Probe: End-to-end Capacity Probing in Wireless Ad Hoc Networks Ling-Jyh Chen1 , Tony Sun2 and systematic study in ad hoc, multihop wireless networks is still lacking. Yet the rate of a wireless link can deployment. In this paper, we present AdHoc Probe, a packet-pair based technique, to estimate end-to-end path

Chen, Ling-Jyh

430

Wireless Communications and Networking Technologies for Smart Grid: Paradigms and Challenges  

E-Print Network [OSTI]

Smart grid, regarded as the next generation power grid, uses two-way flows of electricity and information to create a widely distributed automated energy delivery network. In this work we present our vision on smart grid from the perspective of wireless communications and networking technologies. We present wireless communication and networking paradigms for four typical scenarios in the future smart grid and also point out the research challenges of the wireless communication and networking technologies used in smart grid

Fang, Xi; Xue, Guoliang

2011-01-01T23:59:59.000Z

431

Lighting affects appearance LightSource emits photons  

E-Print Network [OSTI]

1 Lighting affects appearance #12;2 LightSource emits photons Photons travel in a straight line). And then some reach the eye/camera. #12;3 Basic fact: Light is linear Double intensity of sources, double photons reaching eye. Turn on two lights, and photons reaching eye are same as sum of number when each

Jacobs, David

432

ECE 466: LED Lighting Systems -Incandescent lightings rise and  

E-Print Network [OSTI]

versus cost - Power Electronic Drives for CFL and LED light sources to achieve dimmable operation - Basic electric AC and DC circuits at Sophomore level or equivalents Absolutes Lighting System Requirements index as a metric of a light source - Power Electronic Energy sources driving light sources in a compact

Schumacher, Russ

433

Lighting and Surfaces 11.1 Introduction to Lighting  

E-Print Network [OSTI]

-object-at-a-time. "Intrinsic" light is the light emitted by the object itself, such as the glow from a TV screen, a light-emitting diode, or a star. "Ambient" light is an illumination that seems to come from all sides. In the real

Boyd, John P.

434

Maintenance Awareness in Wireless Sensor Networks Andre Barroso, Utz Roedig and Cormac J. Sreenan  

E-Print Network [OSTI]

Maintenance Awareness in Wireless Sensor Networks Andre Barroso, Utz Roedig and Cormac J. Sreenan Mobile & Internet Systems Laboratory (MISL), University College Cork, Ireland Email: {a.barroso, u

Roedig, Utz

435

Maintenance Efficient Routing in Wireless Sensor Networks Andre Barroso, Utz Roedig and Cormac Sreenan  

E-Print Network [OSTI]

Maintenance Efficient Routing in Wireless Sensor Networks Andre Barroso, Utz Roedig and Cormac Sreenan Mobile & Internet Systems Laboratory, University College Cork, Ireland Email: {a.barroso u

Sreenan, Cormac J.

436

Energy savings in Wireless Mesh Networks in a time-variable context  

E-Print Network [OSTI]

Abstract Energy consumption of communication systems is becoming a fundamental issue and, among all the sectors, wireless access networks are largely...

2010-12-20T23:59:59.000Z

437

The impact of Wireless Sensor Networks on the society, industry and everyday life by is forecasted  

E-Print Network [OSTI]

, senso- rics, antennas, wireless communication, microwave technologies, energy harvesting, computer and generate energy, make sensor networks self-configuring, robust and maintenance-free up to 10 years

Flener, Pierre

438

E-Print Network 3.0 - adaptive bio-inspired wireless Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Summary: -224460 Traffic Adaptivity in Wireless Sensor Networks (TRAWSN) Energy efficiency is a major concern in the design... - cations were required to adapt the...

439

Software-defined Radio Based Wireless Tomography: Experimental Demonstration and Verification  

SciTech Connect (OSTI)

This letter presents an experimental demonstration of software-defined-radio-based wireless tomography using computer-hosted radio devices called Universal Software Radio Peripheral (USRP). This experimental brief follows our vision and previous theoretical study of wireless tomography that combines wireless communication and RF tomography to provide a novel approach to remote sensing. Automatic data acquisition is performed inside an RF anechoic chamber. Semidefinite relaxation is used for phase retrieval, and the Born iterative method is utilized for imaging the target. Experimental results are presented, validating our vision of wireless tomography.

Bonior, Jason D [ORNL; Hu, Zhen [Tennessee Technological University; Guo, Terry N. [Tennessee Technological University; Qiu, Robert C. [Tennessee Technological University; Browning, James P. [United States Air Force Research Laboratory, Wright-Patterson Air Force Base; Wicks, Michael C. [University of Dayton Research Institute

2015-01-01T23:59:59.000Z

440

A Scheduling Algorithm for Consistent Monitoring Results with Solar Powered High-Performance Wireless Embedded Systems  

E-Print Network [OSTI]

A Scheduling Algorithm for Consistent Monitoring Results with Solar Powered High but critical task for solar powered wireless high power embedded systems. Our algorithm relies on an energy

Simunic, Tajana

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Sandia National Laboratories: White Light Creation Architectures  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

TechnologiesWhite Light Creation Architectures White Light Creation Architectures Overview of SSL White Light Creation Architectures The entire spectral range of visible light can...

442

Pupillary efficient lighting system  

DOE Patents [OSTI]

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

443

Light harvesting arrays  

DOE Patents [OSTI]

A light harvesting array useful for the manufacture of devices such as solar cells comprises: (a) a first substrate comprising a first electrode; and (b) a layer of light harvesting rods electrically coupled to the first electrode, each of the light harvesting rods comprising a polymer of Formula I: X.sup.1.paren open-st.X.sup.m+1).sub.m (I) wherein m is at least 1, and may be from two, three or four to 20 or more; X.sup.1 is a charge separation group (and preferably a porphyrinic macrocycle, which may be one ligand of a double-decker sandwich compound) having an excited-state of energy equal to or lower than that of X.sup.2, and X.sup.2 through X.sup.m+1 are chromophores (and again are preferably porphyrinic macrocycles).

Lindsey, Jonathan S. (Raleigh, NC)

2002-01-01T23:59:59.000Z

444

Light emitting ceramic device  

DOE Patents [OSTI]

A light-emitting ceramic based panel, hereafter termed "electroceramescent" panel, is herein claimed. The electroceramescent panel is formed on a substrate providing mechanical support as well as serving as the base electrode for the device. One or more semiconductive ceramic layers directly overlay the substrate, and electrical conductivity and ionic diffusion are controlled. Light emitting regions overlay the semiconductive ceramic layers, and said regions consist sequentially of a layer of a ceramic insulation layer and an electroluminescent layer, comprised of doped phosphors or the equivalent. One or more conductive top electrode layers having optically transmissive areas overlay the light emitting regions, and a multi-layered top barrier cover comprising one or more optically transmissive non-combustible insulation layers overlay said top electrode regions.

Valentine, Paul; Edwards, Doreen D.; Walker, Jr., William John; Slack, Lyle H.; Brown, Wayne Douglas; Osborne, Cathy; Norton, Michael; Begley, Richard

2010-05-18T23:59:59.000Z

445

Radioluminescent lighting technology  

SciTech Connect (OSTI)

The glow-in-the-dark stereotype that characterizes the popular image of nuclear materials is not accidental. When the French scientist, Henri Becquerel, first discovered radioactivity in 1896, he was interested in luminescence. Radioluminescence, the production of light from a mixture of energetic and passive materials, is probably the oldest practical application of the unstable nucleus. Tritium-based radioluminescent lighting, in spite of the biologically favorable character of the gaseous tritium isotope, was included in the general tightening of environmental and safety regulations. Tritium light manufacturers would have to meet two fundamental conditions: (1) The benefit clearly outweighed the risk, to the extent that even the perceived risk of a skeptical public would be overcome. (2) The need was significant enough that the customer/user would be willing and able to afford the cost of regulation that was imposed both in the manufacture, use and eventual disposal of nuclear materials. In 1981, researchers at Oak Ridge National Laboratory were investigating larger radioluminescent applications using byproduct nuclear material such as krypton-85, as well as tritium. By 1982, it appeared that large source, (100 Curies or more) tritium gas tube, lights might be useful for marking runways and drop zones for military operations and perhaps even special civilian aviation applications. The successful development of this idea depended on making the light bright enough and demonstrating that large gas tube sources could be used and maintained safely in the environment. This successful DOE program is now in the process of being completed and closed-out. Working closely with the tritium light industry, State governments and other Federal agencies, the basic program goals have been achieved. This is a detailed report of what they have learned, proven, and discovered. 91 refs., 29 figs., 5 tabs. (JF)

Not Available

1990-01-01T23:59:59.000Z

446

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 4 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: Allow occupants to choose the appropriate light level for each

California at Davis, University of

447

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 3 MANDATORY LIGHTING CONTROLS 1. 130.1 (a) Area Controls: Manual controls that control lighting in each area separately 2. 130.1 (b) Multi-level Controls: "Dimmability." Allow occupants to choose the appropriate light

California at Davis, University of

448

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

SECTION 3 LIGHTING 101 1. Common terminology 2. Sources & luminaires 3. Controls #12;SECTION 3SECTION 3 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use

California at Davis, University of

449

MANDATORY MEASURES INDOOR LIGHTING CONTROLS  

E-Print Network [OSTI]

MANDATORY MEASURES INDOOR LIGHTING CONTROLS (Reference: Sub-Chapter 4, Section 130.1) #12;SECTION 5 MANDATORY LIGHTING CONTROLS 1. Area Controls: Manual controls that control lighting in each area separately 2. Multi-level Controls: Allow occupants to choose the appropriate light level for each area 3. Shut

California at Davis, University of

450

LIGHTING 101 1. Common terminology  

E-Print Network [OSTI]

LIGHTING 101 1. Common terminology 2. Sources and luminaires 3. Controls #12;SECTION 2 DISCUSSION: COMMON LIGHTING TERMINOLOGY 1. What are the definitions of the following lighting terms? 2. Do you use these terms in professional practice? 3. What other lighting terminology do you use on the job? SLIDE 14

California at Davis, University of

451

Extreme Ultraviolet Light Chris Cosio  

E-Print Network [OSTI]

Prospectus Extreme Ultraviolet Light Chris Cosio #12;The field of extreme ultraviolet light (XUV to the way XUV interacts with object, XUV properties are difficult to observe. Extreme ultraviolet light is absorbed by all objects it comes in contact with. Furthermore, extreme ultraviolet light also has low

Hart, Gus

452

Inter/Intra-Vehicle Wireless Communication file:///X:/www-docs/cse574-06/ftp/vehicular_wireless/index.html 1 of 16 5/9/2006 7:32 PM  

E-Print Network [OSTI]

Inter/Intra-Vehicle Wireless Communication file:///X:/www-docs/cse574-06/ftp/vehicular_wireless/index.html 1 of 16 5/9/2006 7:32 PM Inter/Intra-Vehicle Wireless Communication Gregory S. Bickel greg vehicles, as well as between vehicles. Different concepts associated with radio frequency bands and wave

Jain, Raj

453

Wireless Sensor Network for Advanced Energy Management Solutions  

SciTech Connect (OSTI)

Eaton has developed an advanced energy management solution that has been deployed to several Industries of the Future (IoF) sites. This demonstrated energy savings and reduced unscheduled downtime through an improved means for performing predictive diagnostics and energy efficiency estimation. Eaton has developed a suite of online, continuous, and inferential algorithms that utilize motor current signature analysis (MCSA) and motor power signature analysis (MPSA) techniques to detect and predict the health condition and energy usage condition of motors and their connect loads. Eaton has also developed a hardware and software platform that provided a means to develop and test these advanced algorithms in the field. Results from lab validation and field trials have demonstrated that the developed advanced algorithms are able to detect motor and load inefficiency and performance degradation. Eaton investigated the performance of Wireless Sensor Networks (WSN) within various industrial facilities to understand concerns about topology and environmental conditions that have precluded broad adoption by the industry to date. A Wireless Link Assessment System (WLAS), was used to validate wireless performance under a variety of conditions. Results demonstrated that wireless networks can provide adequate performance in most facilities when properly specified and deployed. Customers from various IoF expressed interest in applying wireless more broadly for selected applications, but continue to prefer utilizing existing, wired field bus networks for most sensor based applications that will tie into their existing Computerized Motor Maintenance Systems (CMMS). As a result, wireless technology was de-emphasized within the project, and a greater focus placed on energy efficiency/predictive diagnostics. Commercially available wireless networks were only utilized in field test sites to facilitate collection of motor wellness information, and no wireless sensor network products were developed under this project. As an outgrowth of this program, Eaton developed a patented energy-optimizing drive control technology that is complementary to a traditional variable frequency drives (VFD) to enable significant energy savings for motors with variable torque applications, such as fans, pumps, and compressors. This technology provides an estimated energy saving of 2%-10% depending on the loading condition, in addition to the savings obtained from a traditional VFD. The combination of a VFD with the enhanced energy-optimizing controls will provide significant energy savings (10% to 70% depending on the load and duty cycle) for motors that are presently connected with across the line starters. It will also provide a more favorable return on investment (ROI), thus encouraging industries to adopt VFDs for more motors within their facilities. The patented technology is based on nonintrusive algorithms that estimate the instantaneous operating efficiency and motor speed and provide active energy-optimizing control of a motor, using only existing voltage and current sensors. This technology is currently being commercialized by Eatons Industrial Controls Division in their next generation motor control products. Due to the common nonintrusive and inferential nature of various algorithms, this same product can also include motor and equipment condition monitoring features, providing the facility owner additional information to improve process uptime and the associated energy savings. Calculations estimated potential energy savings of 261,397GWh/Yr ($15.7B/yr), through retrofitting energy-optimizing VFDs into existing facilities, and incorporating the solution into building equipment sold by original equipment manufacturers (OEMs) and installed by mechanical and electrical contractors. Utilizing MCSA and MPSA for predictive maintenance (PM) of motors and connected equipment reduces process downtime cost and the cost of wasted energy associated with shutting down and restarting the processes. Estimated savings vary depending on the industry segment and equi

Peter J. Theisen; Bin Lu, Charles J. Luebke

2009-09-23T23:59:59.000Z

454

Systems and methods for performing wireless financial transactions  

DOE Patents [OSTI]

A secure computing module (SCM) is configured for connection with a host device. The SCM includes a processor for performing secure processing operations, a host interface for coupling the processor to the host device, and a memory connected to the processor wherein the processor logically isolates at least some of the memory from access by the host device. The SCM also includes a proximate-field wireless communicator connected to the processor to communicate with another SCM associated with another host device. The SCM generates a secure digital signature for a financial transaction package and communicates the package and the signature to the other SCM using the proximate-field wireless communicator. Financial transactions are performed from person to person using the secure digital signature of each person's SCM and possibly message encryption. The digital signatures and transaction details are communicated to appropriate financial organizations to authenticate the transaction parties and complete the transaction.

McCown, Steven Harvey (Rigby, ID)

2012-07-03T23:59:59.000Z

455

Investigate the Development of a Wireless Flight Test System  

E-Print Network [OSTI]

Investigate the Development of a Wireless Flight Test System By Pradeep Attalury Submitted to the graduate program in Aerospace Engineering and the Graduate Faculty of the University of Kansas in partial fulfillment of the requirements... ............................................................ 98 Figure 5.11: The W-AHRS Unit in the Front Seat ................................................... 99 Figure 5.12: The Access Point and the Battery ......................................................... 99 Figure 5.13: Engineer in the Back...

Attalury, Pradeep

2009-12-23T23:59:59.000Z

456

TCPL: A Defense against wormhole attacks in wireless sensor networks  

SciTech Connect (OSTI)

Do In this paper presents recent advances in technology have made low-cost, low-power wireless sensors with efficient energy consumption. A network of such nodes can coordinate among themselves for distributed sensing and processing of certain data. For which, we propose an architecture to provide a stateless solution in sensor networks for efficient routing in wireless sensor networks. This type of architecture is known as Tree Cast. We propose a unique method of address allocation, building up multiple disjoint trees which are geographically inter-twined and rooted at the data sink. Using these trees, routing messages to and from the sink node without maintaining any routing state in the sensor nodes is possible. In this paper, we introduce the wormhole attack, a severe attack in ad hoc networks that is particularly challenging to defend against. The wormhole attack is possible even if the attacker has not compromised any hosts and even if all communication provides authenticity and confidentiality. In the wormhole attack, an attacker records packets (or bits) at one location in the network, tunnels them to another location, and retransmits them there into the network. The wormhole attack can form a serious threat in wireless networks, especially against many sensor network routing protocols and location-based wireless security systems. For example, most existing ad hoc network routing protocols, without some mechanism to defend against the wormhole attack, would be unable to find routes longer than one or two hops, severely disrupting communication. We present a new, general mechanism, called packet leashes, for detecting and thus defending against wormhole attacks, and we present a specific protocol, called TIK, that implements leashes.

Kumar, K. E. Naresh [PG Student, Dept of Computer Science and Engineering, KBNCE, Gulbarga, Karnataka (India); Waheed, Mohd. Abdul [Asst. Professor, Dept of Computer Science and Engineering, KBNCE, Gulbarga, Karnataka (India); Basappa, K. Kari [Professor, Dept of E and CE, Dayanand College of Engineering, Banglore, Karnataka (India)

2010-10-26T23:59:59.000Z

457

Cyber Security Requirements for Wireless Devices and Information Systems  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice establishes DOE policy requirements and responsibilities for using wireless networks and devices within DOE and implements the requirements of DOE 0 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03, including requirements for cyber resource protection, risk management, program evaluation, and cyber security plan development and maintenance. No cancellation. DOE N 205.15, dated 3/18/05, extends this directive until 3/18/06.

2004-02-11T23:59:59.000Z

458

Windows and lighting program  

SciTech Connect (OSTI)

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

Not Available

1990-06-01T23:59:59.000Z

459

Radioluminescent polymer lights  

SciTech Connect (OSTI)

The preparation of radioluminescent light sources where the tritium is located on the aryl-ring in a polymer has been demonstrated with deuterium/tritium substitution. This report discusses tests, results, and future applications of radioluminescent polymers. 10 refs. (FI)

Jensen, G.A.; Nelson, D.A.; Molton, P.M.

1990-09-01T23:59:59.000Z

460

Sweetness and light  

E-Print Network [OSTI]

1. Sweetness and Light. A novel. Judi lives in a nice, clean house with her seventeen year old stepson, who wont talk to her in anything but monosyllables. His father, Nelson, and she are struggling to relate to each ...

Craig, Katie

2014-07-03T23:59:59.000Z

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Development of a measuring system for parking position Can wireless charging of electric vehicles deliver its full  

E-Print Network [OSTI]

of our projects aims to obtain a better understanding of wireless charging of electric vehicles regarding connection of electric vehicles to the grid. In order for wireless charging to be successful1 Development of a measuring system for parking position ­ Can wireless charging of electric

Zhao, Yuxiao

462

IEEE TRANSACTIONS ON INFORMATION THEORY, VOL. VOLUME, NO. NUMBER, MONTH YEAR 1 Transmission Capacity of Wireless Ad Hoc  

E-Print Network [OSTI]

Capacity of Wireless Ad Hoc Networks with Successive Interference Cancellation Steven Weber, Member, IEEE Abstract-- The transmission capacity of a wireless ad hoc network can be defined as the maximum allowable classes of multiuser channels, but has not been carefully evaluated in the context of an ad hoc wireless

de Veciana, Gustavo

463

The University of Texas at Austin Talk at EURECOM -p. 1/30 Transmission Capacity of Wireless Ad Hoc  

E-Print Network [OSTI]

;· · Talk Outline Introduction Network Model Transmission Capacity Framework Multi-Antenna Wireless Ad Hoc The University of Texas at Austin Talk at EURECOM - p. 2/30 We consider a wireless ad hoc network with multi-Antenna Wireless Ad Hoc Networks Perfect Channel Knowledge Linear Precoding with CSIT Imperfect Channel Knowledge

Gesbert, David

464

A single sediment-Microbial Fuel Cell powering a wireless telecommunication system Yohann R. J. Thomas a  

E-Print Network [OSTI]

1 A single sediment-Microbial Fuel Cell powering a wireless telecommunication system Yohann R. J Abstract We report the ability of a single sediment-Microbial Fuel Cell (MFC) to power wireless sensor, with no membrane or artificial catalysts. Key words: Sediment-Microbial Fuel Cell; Sensor Networks; Wireless

Paris-Sud XI, Universit de

465

Stanford University Exploiting Channel Knowledge at the Tx in MISO and MIMO Wireless Exploiting Partial Channel Knowledge at  

E-Print Network [OSTI]

Stanford University Exploiting Channel Knowledge at the Tx in MISO and MIMO Wireless Exploiting Partial Channel Knowledge at the Transmitter in MISO and MIMO Wireless SPAWC 2003 Rome, Italy June 18 Exploiting Channel Knowledge at the Tx in MISO and MIMO Wireless Outline Introduction Perfect CSI

Paulraj, Arogyaswami

466

Expected k-coverage in wireless sensor networks Li-Hsing Yen *, Chang Wu Yu, Yang-Min Cheng  

E-Print Network [OSTI]

communications and micro-sensing MEMS technology has enabled the deployment of wireless sensor networksExpected k-coverage in wireless sensor networks Li-Hsing Yen *, Chang Wu Yu, Yang-Min Cheng 2005 Available online 24 August 2005 Abstract We are concerned with wireless sensor networks where n

Chen, Sheng-Wei

467

DOWNHOLE POWER GENERATION AND WIRELESS COMMUNICATIONS FOR INTELLIGENT COMPLETIONS APPLICATIONS  

SciTech Connect (OSTI)

The first quarter of the Downhole Power Generation and Wireless Communications for Intelligent Completions Applications was characterized by the evaluation and determination of the specifications required for the development of the system for permanent applications in wellbores to the optimization of hydrocarbon production. The system will monitor and transmit in real time pressure and temperature information from downhole using the production tubing as the medium for the transmission of the acoustic waves carrying digital information. The most common casing and tubing sizes were determined by interfacing with the major oil companies to obtain information related to their wells. The conceptual design was created for both the wireless gauge section of the tool as well as the power generation module. All hardware for the wireless gauge will be placed in an atmospheric pressure chamber located on the outside of a production tubing with 11.4 centimeter (4-1/2 inch) diameter. This mounting technique will reduce cost as well as the diameter and length of the tool and increase the reliability of the system. The power generator will use piezoelectric wafers to generate electricity based on the flow of hydrocarbons through an area in the wellbore where the tool will be deployed. The goal of the project is to create 1 Watt of power continuously.

Paul Tubel

2003-03-24T23:59:59.000Z

468

Steam distribution and energy delivery optimization using wireless sensors  

SciTech Connect (OSTI)

The Extreme Measurement Communications Center at Oak Ridge National Laboratory (ORNL) explores the deployment of a wireless sensor system with a real-time measurement-based energy efficiency optimization framework in the ORNL campus. With particular focus on the 12-mile long steam distribution network in our campus, we propose an integrated system-level approach to optimize the energy delivery within the steam distribution system. We address the goal of achieving significant energy-saving in steam lines by monitoring and acting on leaking steam valves/traps. Our approach leverages an integrated wireless sensor and real-time monitoring capabilities. We make assessments on the real-time status of the distribution system by mounting acoustic sensors on the steam pipes/traps/valves and observe the state measurements of these sensors. Our assessments are based on analysis of the wireless sensor measurements. We describe Fourier-spectrum based algorithms that interpret acoustic vibration sensor data to characterize flows and classify the steam system status. We are able to present the sensor readings, steam flow, steam trap status and the assessed alerts as an interactive overlay within a web-based Google Earth geographic platform that enables decision makers to take remedial action. We believe our demonstration serves as an instantiation of a platform that extends implementation to include newer modalities to manage water flow, sewage and energy consumption.

Olama, Mohammed M [ORNL; Allgood, Glenn O [ORNL; Kuruganti, Phani Teja [ORNL; Sukumar, Sreenivas R [ORNL; Djouadi, Seddik M [ORNL; Lake, Joe E [ORNL

2011-01-01T23:59:59.000Z

469

Harnessing waste heat and reducing wasted lighting : three mechanical structures for efficient energy systems  

E-Print Network [OSTI]

This thesis presents three mechanical structures designed for efficient energy systems. In [3], Cooley presents a modification of a fluorescent lamp which allows it to detect nearby occupants and dim itself automatically. ...

Stronger, Brad A

2008-01-01T23:59:59.000Z

470

http://www.computerworld.com/printthis/2004/0,4814,95179,00.html 1 The State of RFID: Heading Toward a Wireless  

E-Print Network [OSTI]

Toward a Wireless Internet of Artifacts Opinion by Rajit Gadh AUGUST 11, 2004 (COMPUTERWORLD) - Ever

California at Los Angeles, University of

471

SECOND BEST PAPER PRIZE in excellence for applied research, Presented at IEEE ComSoc sponsored THIRD ANNUAL WIRELESS TELECOMMUNICATIONS SYMPOSIUM (WTS 2004)  

E-Print Network [OSTI]

-Cheng Chu, Rajit Gadh UCLA - Wireless Internet for Mobile Enterprise Consortium (WINMEC) 420 Westwood Plaza

California at Los Angeles, University of

472

http://www.computerworld.com/mobiletopics/mobile/story/0,10801,96416,00.html 1 RFID: Getting From Mandates to a Wireless  

E-Print Network [OSTI]

Mandates to a Wireless Internet of Artifacts Opinion by Rajit Gadh OCTOBER 04, 2004 (COMPUTERWORLD) - Radio

California at Los Angeles, University of

473

Bounds on the Energy Consumption of Routings in Wireless Sensor Networks  

E-Print Network [OSTI]

Bounds on the Energy Consumption of Routings in Wireless Sensor Networks Juan Alonso1 , Adam. Energy is one of the most important resources in wireless sensor networks. We use an idealized mathematical model to study the impact of routing on energy consumption. We find explicit bounds on the minimal

Voigt, Thiemo

474

Improving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless networks  

E-Print Network [OSTI]

transmission. An alternative way to conserve energy is to apply power control [1­4]. A wireless node is allowedImproving energy efficiency via probabilistic rate combination in 802.11 multi-rate wireless in revised form 20 January 2009 Accepted 27 January 2009 Available online 6 February 2009 Keywords: Energy

Lui, John C.S.

475

Published in IET Wireless Sensor Systems Received on 24th May 2012  

E-Print Network [OSTI]

of Wireless Sensor Network and Communication, SIMIT, Shanghai, People's Republic of China 3 Department of fixed copper wires has obvious advantages. Wireless sensor networks (WSNs) offer the data collection required, which is particularly important for engine testing and instrumentation applications. In order

Atkinson, Robert C

476

Pollution Attacks and Defenses in Wireless Inter-flow Network Coding Systems  

E-Print Network [OSTI]

1 Pollution Attacks and Defenses in Wireless Inter-flow Network Coding Systems Jing Dong, Reza Abstract--We study data pollution attacks in wireless inter-flow network coding systems. Although several the existing systems, and use it to analyze the impact of pollution attacks. Our analysis shows

Curtmola, Reza

477

Taming Uncertainties in Wireless Messaging for Automotive Cyber-Physical-Systems  

E-Print Network [OSTI]

Taming Uncertainties in Wireless Messaging for Automotive Cyber-Physical-Systems Hongwei Zhang Wireless networking for automotive CPS Today's vehicles are much more than a mechanical device, and complex to the scalability of vehicular communication system, which is a basic element of automotive cyber-physical systems

Rajkumar, Ragunathan "Raj"

478

Design of indoor communication infrastructure for ultra-high capacity next generation wireless services  

E-Print Network [OSTI]

[1, 2, 4]. 2 1.1. MODERN WIRELESS COMMUNICATION boards, solar panels and electricity meters could all be controlled wirelessly with the aim of creating a much more efficient energy supply system [6]. This increasing demand for and reliance upon...

Gordon, George S. D.

2013-11-12T23:59:59.000Z

479

An Energy-Efficient Communication Scheme in Wireless Cable Sensor Networks  

E-Print Network [OSTI]

An Energy-Efficient Communication Scheme in Wireless Cable Sensor Networks Xiao Chen Department of Computer Science U. S. Naval Postgraduate School Monterey, CA 93943 ncrowe@nps.edu Abstract and communication. Like wireless sensor networks with point sensors, energy-efficient communication is still

Rowe, Neil C.

480

Dynamic Framed-ALOHA for Energy-Constrained Wireless Sensor Networks with Energy Harvesting  

E-Print Network [OSTI]

to collect data from sensors without depleting their energy reserves. It is noted that such trade- offDynamic Framed-ALOHA for Energy-Constrained Wireless Sensor Networks with Energy Harvesting Fabio Framed-ALOHA (DFA) protocol is studied for wireless sensor networks with energy limitations and energy

Simeone, Osvaldo

Note: This page contains sample records for the topic "wireless dimming lighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Throughput and Ergodic Capacity of Wireless Energy Harvesting Based DF Relaying Network  

E-Print Network [OSTI]

-to-point communication systems and studied rate-energy trade-off assuming single-input-single-output (SISO) [1], [3Throughput and Ergodic Capacity of Wireless Energy Harvesting Based DF Relaying Network Ali A-and-forward (DF) relaying network based on wireless energy harvesting. The energy constrained relay node first

Zhou, Xiangyun "Sean"

482

Quantitative Analysis of Transmission Power Control in Wireless Ad-hoc Networks  

E-Print Network [OSTI]

1 Quantitative Analysis of Transmission Power Control in Wireless Ad-hoc Networks Seung-Jong Park the issue of transmission power con- trol in wireless ad-hoc networks. In general, it is assumed that minimum transmission power achieves the optimal throughput of an ad-hoc network because it produces

Park, Seung-Jong "Jay"

483

Using Variable-Range Transmission Power Control in Wireless Ad Hoc Networks  

E-Print Network [OSTI]

Using Variable-Range Transmission Power Control in Wireless Ad Hoc Networks Javier Gomez and Andrew networks such as ad hoc and sensor networks. First, using previous work by Steele [18], we show that in this paper highlight the need to design future MAC and routing protocols for wireless ad hoc and sensor

Gomez-Castellanos, Javier

484

Introduction to Ad hoc Networks CS-647: Advanced Topics in Wireless Networks  

E-Print Network [OSTI]

1-1 Introduction to Ad hoc Networks CS-647: Advanced Topics in Wireless Networks Drs. Baruch Awerbuch 2008 #12;1-2 Outline What is an ad hoc network? Challenges facing ad hoc networks History of Ad C. K. Toh, Chapter 3, "Ad Hoc Wireless Networks", Prentice Hall, 2002 D. P. Agrawal and Qing

Amir, Yair

485

SEAD: secure efficient distance vector routing for mobile wireless ad hoc networks  

E-Print Network [OSTI]

SEAD: secure efficient distance vector routing for mobile wireless ad hoc networks Yih-Chun Hu a University, Houston, TX 77005, USA Abstract An ad hoc network is a collection of wireless computers (nodes stations or access points. Although many previous ad hoc network routing protocols have been based in part

Ramkumar, Mahalingam

486

A Multiobjective Performance Evaluation Framework for Routing in Wireless Ad Hoc  

E-Print Network [OSTI]

A Multiobjective Performance Evaluation Framework for Routing in Wireless Ad Hoc Networks Katia.runser, jean-marie.gorce@insa-lyon.fr Abstract--Wireless ad hoc networks are seldom characterized by one single. Instead, we address this problem by proposing a new modeling framework for routing in ad hoc networks

Paris-Sud XI, Université de

487

Optimally Increasing Secure Connectivity in Multi-hop Wireless Ad Hoc Networks  

E-Print Network [OSTI]

1 Optimally Increasing Secure Connectivity in Multi-hop Wireless Ad Hoc Networks Seyit Ahmet--We consider the problem of how to maximize secure connectivity of multi-hop wireless ad hoc networks after, integrity and confidentiality in multi-hop wire- less ad hoc networks. An example of such networks are multi

Bystroff, Chris

488

Energy Balancing Routing Schemes for Low-Power Wireless Networks Eun-Sook Sung, Miodrag Potkonjak  

E-Print Network [OSTI]

Energy Balancing Routing Schemes for Low-Power Wireless Networks Eun-Sook Sung, Miodrag Potkonjak}@cs.ucla.edu Abstract-- We address the problem of energy balancing in multi-hop wireless networks to optimize results show, firstly, that both schemes achieve significant improvement of energy balancing proportional

Potkonjak, Miodrag

489

Context-aware energy-efficient wireless sensor architecture for body activity recognition  

E-Print Network [OSTI]

conditions [13], [15], [16], and the usage of devices with higher computing, storage and energy capabilitiesContext-aware energy-efficient wireless sensor architecture for body activity recognition Tifenn 60205 Compigne, France Abstract--In this paper, we present EEWAA, a new Energy- Efficient Wireless

Boyer, Edmond

490

UNLV OFFICE OF INFORMATION TECHNOLOGY WIRELESS NETWORK (Wi-Fi) POLICY  

E-Print Network [OSTI]

UNLV OFFICE OF INFORMATION TECHNOLOGY WIRELESS NETWORK (Wi-Fi) POLICY RESPONsmLE ADMINISTRATOR REVISION DATE: NA STATEMENT OF PURPOSE The purpose of this policy is to: Maintain a secure network environment. Ensure seamless wireless network (Wi-Fi) services on campus. ENTITIES AFFECTED BY THIS POLICY

Hemmers, Oliver

491

IEEE INFOCOM 2001 1 Investigating the Energy Consumption of a Wireless  

E-Print Network [OSTI]

IEEE INFOCOM 2001 1 Investigating the Energy Consumption of a Wireless Network Interface in an Ad and evaluation of network protocols re­ quires knowledge of the energy consumption behavior of actual wireless interfaces. But little practical information is available about the energy consumption behavior of well

492

Energy Consumption of TCP Reno, Newreno, and SACK in Multi-Hop Wireless Networks  

E-Print Network [OSTI]

Energy Consumption of TCP Reno, Newreno, and SACK in Multi-Hop Wireless Networks Harkirat Singh In this paper we compare the energy consumption behavior of three versions of TCP ­ Reno, Newreno, and SACK the lowest overall energy consumption. 1. INTRODUCTION Today, sophisticated wireless devices are gaining

Singh, Suresh

493

Passive Loss Inference in Wireless Sensor Networks Based on Network Coding  

E-Print Network [OSTI]

Passive Loss Inference in Wireless Sensor Networks Based on Network Coding Yunfeng Lin, Ben Liang, Baochun Li Department of Electrical and Computer Engineering University of Toronto {ylin, bli it desirable to monitor link loss rates in wireless sensor networks. In this paper, we study the loss inference

Li, Baochun

494

Drive-by-Wireless Teleoperation with Network QoS Adaptation  

E-Print Network [OSTI]

tele- operation of drive-by-wireless applications, which utilize energy concepts and impose an adaptation scheme for drive- by-wireless teleoperation of an electric vehicle. The performance variation due to the varying time delay and packet losses is investigated and catered for by using an adaptive gain scheduling

Paris-Sud XI, Université de

495

Special Issue on Broadband Wireless Networking Published online: 23 May 2006  

E-Print Network [OSTI]

efficiently and flexibly create new services and business models based on the component-based architecture-based wireless/wired Interworking,'' Cheng et al. discuss efficient resource allocation techniques for a policy Science + Business Media, LLC 2006 Wireless communication revolution has made funda- mental changes

Shen, Xuemin "Sherman"

496

Delay Bounded Rate and Power Control in Energy Harvesting Wireless Networks  

E-Print Network [OSTI]

in environmentally powered wireless networks with bursty packet arrivals. Varying the size of the energy storage unit such as solar energy, mechanical energy and thermal energy have started finding use in wireless sensor networks, followed by an energy storage unit. The energy harvested by the front end is stored in the storage unit

Rajan, Dinesh

497

TrueLink: A Practical Countermeasure to the Wormhole Attack in Wireless Networks  

E-Print Network [OSTI]

TrueLink: A Practical Countermeasure to the Wormhole Attack in Wireless Networks Jakob Eriksson attack, wireless transmissions are recorded at one location and replayed at another, creating a virtual link under attacker control. Proposed countermeasures to this attack use tight clock synchronization

Krishnamurthy, Srikanth

498

UHF Solar Powered Active Oscillator Antenna on Low Cost Flexible Substrate for Wireless Identification Applications  

E-Print Network [OSTI]

UHF Solar Powered Active Oscillator Antenna on Low Cost Flexible Substrate for Wireless nature of the circuit and providing operational autonomy by harvesting solar power without affecting, solar power harvesting. I. INTRODUCTION The increasing use of RFIDs and wireless sensor networks

Tentzeris, Manos

499

Guest Wireless Access Overview Page 1 of 2 August 2010 Technology Help Desk  

E-Print Network [OSTI]

Guest Wireless Access Overview Page 1 of 2 August 2010 Technology Help Desk 412 624-HELP [4357, refer to the help sheet Requesting Guest Wireless Access at technology.pitt.edu. Note: By approving on the University's network Get Help The Technology Help Desk at 412 624-HELP [4357] is available 24 hours a day

Jiang, Huiqiang

500

Energy-Delay Trade-off of Wireless Data Collection in the Plane  

E-Print Network [OSTI]

Energy-Delay Trade-off of Wireless Data Collection in the Plane Mihaela Mitici , Jasper Goseling and the energy needed by the devices to transmit their observations. Fundamental bounds on the energy-delay trade and ii) the transmission energy used by the wireless devices to transmit their observations, which

Boucherie, Richard J.