Powered by Deep Web Technologies
Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Integrated self-cleaning window assembly for optical transmission in combustion environments  

DOE Patents [OSTI]

An integrated window design for optical transmission in combustion environments is described. The invention consists of an integrated optical window design that prevents and removes the accumulation of carbon-based particulate matter and gaseous hydrocarbons through a combination of heat and catalysis. These windows will enable established optical technologies to be applied to combustion environments and their exhaust systems.

Kass, Michael D [Oak Ridge, TN

2007-07-24T23:59:59.000Z

2

that minimizes vehicle emissions during design of routes in congested environments with time-dependent travel speeds, hard time windows,  

E-Print Network [OSTI]

that minimizes vehicle emissions during design of routes in congested environments with time-dependent travel speeds, hard time windows, andcapacityconstraints.ThiscreatesanewtypeofVRP,theemissions vehicle routing problem (EVRP). BACKGROUND AND LITERATURE REVIEW There is extensive literature related to vehicle

Bertini, Robert L.

3

ENERGY EFFICIENT WINDOWS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979  

E-Print Network [OSTI]

Replacing window glass with a thin plastic film coated to beof windows can be improved with the use of thin-film coat-windows, the coating can be deposited directly on glass or on plastic films

Berman, S.

2013-01-01T23:59:59.000Z

4

Analysis of the Window Side Thermal Environment Formed by Air Barrier Technique in Winter Conditions and Its Economy  

E-Print Network [OSTI]

the energy-saving potential and thermal comfort of the air barrier technique used in office buildings. It also analyzes the surface temperature of the window by using the simulation software Airpak. According to the results, we can obtain the key control...

Huang, C.; Jia, Y.; Liu, L.; Wang, X.

2006-01-01T23:59:59.000Z

5

Window shopping  

SciTech Connect (OSTI)

The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

Best, D.

1990-03-01T23:59:59.000Z

6

Windows and lighting program  

SciTech Connect (OSTI)

More than 30% of all energy use in buildings is attributable to two sources: windows and lighting. Together they account for annual consumer energy expenditures of more than $50 billion. Each affects not only energy use by other major building systems, but also comfort and productivity -- factors that influence building economics far more than does direct energy consumption alone. Windows play a unique role in the building envelope, physically separating the conditioned space from the world outside without sacrificing vital visual contact. Throughout the indoor environment, lighting systems facilitate a variety of tasks associated with a wide range of visual requirements while defining the luminous qualities of the indoor environment. Windows and lighting are thus essential components of any comprehensive building science program. Despite important achievements in reducing building energy consumption over the past decade, significant additional savings are still possible. These will come from two complementary strategies: (1) improve building designs so that they effectively apply existing technologies and extend the market penetration of these technologies; and (2) develop advanced technologies that increase the savings potential of each application. Both the Windows and Daylighting Group and the Lighting System Research Group have made substantial contributions in each of these areas, and continue to do so through the ongoing research summarized here. 23 refs., 16 figs.

Not Available

1990-06-01T23:59:59.000Z

7

Advancement of Electrochromic Windows  

E-Print Network [OSTI]

Guide for Early-Market Electrochromic Windows. LBNL-59950.Guide for Early-Market Electrochromic Windows Attachment 17:electrochromic prototype windows that were deemed sufficiently mature for market

2006-01-01T23:59:59.000Z

8

Zero Energy Windows  

E-Print Network [OSTI]

Energy Performance of Electrochromic Windows Controlled for2006). Advancement of Electrochromic Windows, CaliforniaSavings Potential of Electrochromic Windows in the U.S.

Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

2006-01-01T23:59:59.000Z

9

Residential Windows and Window Coverings: A Detailed View of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Residential Windows and Window Coverings: A Detailed View of the Installed Base and User Behavior Residential Windows and Window Coverings: A Detailed View of the Installed Base...

10

Advancement of Electrochromic Windows  

E-Print Network [OSTI]

of a thin-film ceramic electrochromic window: Field studyof a Thin-Film Ceramic Electrochromic Window: Field StudyEC window product characteristics The EC is a thin-film WO3-

2006-01-01T23:59:59.000Z

11

Advancement of Electrochromic Windows  

E-Print Network [OSTI]

Guide for Early-Market Electrochromic Windows. LBNL-59950.Granqvist, C.G. 2000. "Electrochromic Tungsten Oxide Films:the performance of the electrochromic windows. Proceedings

2006-01-01T23:59:59.000Z

12

Extending the X Window System  

SciTech Connect (OSTI)

The X Window System was originally developed in 1984 at Massachusetts Institute of Technology. It provides client-server computing functionality and also facilitates the establishment of a distributed computing environment. Since its inception the X Window System has undergone many enhancements. Despite these enhancements there will always be a functionality desired in the standard released version of X that is not supported or commercially or academically available. The developers of the X Window System have designed it in such a way that it is possible to add functionality that is not included in the standard release. This is called an extension. Extensions are one method used to develop a customized version of the X Window System to support a specialized application. This report presents the mechanics of adding an extension and examines a particular extension that was developed at Sandia National Laboratories to support data compression in X Windows which was one aspect of the Desktop Video and Collaborative Engineering Laboratory Directed Research and Development (LDRD).

Brenkosh, J.P.

1993-12-23T23:59:59.000Z

13

Microsoft Word - WEP93  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource Program Preliminary Needs535:UFC5, 2010 First giantMECHANICAL DESIGN

14

Efficient Windows Collaborative  

SciTech Connect (OSTI)

The project goals covered both the residential and commercial windows markets and involved a range of audiences such as window manufacturers, builders, homeowners, design professionals, utilities, and public agencies. Essential goals included: (1) Creation of 'Master Toolkits' of information that integrate diverse tools, rating systems, and incentive programs, customized for key audiences such as window manufacturers, design professionals, and utility programs. (2) Delivery of education and outreach programs to multiple audiences through conference presentations, publication of articles for builders and other industry professionals, and targeted dissemination of efficient window curricula to professionals and students. (3) Design and implementation of mechanisms to encourage and track sales of more efficient products through the existing Window Products Database as an incentive for manufacturers to improve products and participate in programs such as NFRC and ENERGY STAR. (4) Development of utility incentive programs to promote more efficient residential and commercial windows. Partnership with regional and local entities on the development of programs and customized information to move the market toward the highest performing products. An overarching project goal was to ensure that different audiences adopt and use the developed information, design and promotion tools and thus increase the market penetration of energy efficient fenestration products. In particular, a crucial success criterion was to move gas and electric utilities to increase the promotion of energy efficient windows through demand side management programs as an important step toward increasing the market share of energy efficient windows.

Nils Petermann

2010-02-28T23:59:59.000Z

15

Windows technology assessment  

SciTech Connect (OSTI)

This assessment estimates that energy loss through windows is approximately 15 percent of all the energy used for space heating and cooling in residential and commercial buildings in New York State. The rule of thumb for the nation as a whole is about 25 percent. The difference may reflect a traditional assumption of single-pane windows while this assessment analyzed installed window types in the region. Based on the often-quoted assumption, in the United States some 3.5 quadrillion British thermal units (Btu) of primary energy, costing some $20 billion, is annually consumed as a result of energy lost through windows. According to this assessment, in New York State, the energy lost due to heat loss through windows is approximately 80 trillion Btu at an annual cost of approximately $1 billion.

Baron, J.J.

1995-10-01T23:59:59.000Z

16

Zero Energy Windows  

SciTech Connect (OSTI)

Windows in the U.S. consume 30 percent of building heating and cooling energy, representing an annual impact of 4.1 quadrillion BTU (quads) of primary energy. Windows have an even larger impact on peak energy demand and on occupant comfort. An additional 1 quad of lighting energy could be saved if buildings employed effective daylighting strategies. The ENERGY STAR{reg_sign} program has made standard windows significantly more efficient. However, even if all windows in the stock were replaced with today's efficient products, window energy consumption would still be approximately 2 quads. However, windows can be ''net energy gainers'' or ''zero-energy'' products. Highly insulating products in heating applications can admit more useful solar gain than the conductive energy lost through them. Dynamic glazings can modulate solar gains to minimize cooling energy needs and, in commercial buildings, allow daylighting to offset lighting requirements. The needed solutions vary with building type and climate. Developing this next generation of zero-energy windows will provide products for both existing buildings undergoing window replacements and products which are expected to be contributors to zero-energy buildings. This paper defines the requirements for zero-energy windows. The technical potentials in terms of national energy savings and the research and development (R&D) status of the following technologies are presented: (1) Highly insulating systems with U-factors of 0.1 Btu/hr-ft{sup 2}-F; (2) Dynamic windows: glazings that modulate transmittance (i.e., change from clear to tinted and/or reflective) in response to climate conditions; and (3) Integrated facades for commercial buildings to control/ redirect daylight. Market transformation policies to promote these technologies as they emerge into the marketplace are then described.

Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

2006-05-17T23:59:59.000Z

17

Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environment Environment Our good neighbor pledge: to contribute to quality of life in Northern New Mexico through economic development, excellence in education, and active employee...

18

The Efficient Windows Collaborative  

SciTech Connect (OSTI)

The Efficient Windows Collaborative (EWC) is a coalition of manufacturers, component suppliers, government agencies, research institutions, and others who partner to expand the market for energy efficient window products. Funded through a cooperative agreement with the U.S. Department of Energy, the EWC provides education, communication and outreach in order to transform the residential window market to 70% energy efficient products by 2005. Implementation of the EWC is managed by the Alliance to Save Energy, with support from the University of Minnesota and Lawrence Berkeley National Laboratory.

Petermann, Nils

2006-03-31T23:59:59.000Z

19

Subject Responses to Electrochromic Windows  

E-Print Network [OSTI]

Visual quality assessment of electrochromic and conventionalissues for large-area electrochromic windows in commercialOffice worker preferences of electrochromic windows: a pilot

Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

2006-01-01T23:59:59.000Z

20

CH7 Windows Introduction  

E-Print Network [OSTI]

4 Server · Account lockout security ­ Protection contre les attaques sur les mots de passe Windows NT 4 Server · Account lockout security ­ Protection contre les attaques sur les mots de passe

Collette. Sébastien

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Superconducting radiofrequency window assembly  

DOE Patents [OSTI]

The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly has a superconducting metal-ceramic design. The srf window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

Phillips, H.L.; Elliott, T.S.

1997-03-11T23:59:59.000Z

22

Superconductive radiofrequency window assembly  

DOE Patents [OSTI]

The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The SRF window assembly has a superconducting metal-ceramic design. The SRF window assembly comprises a superconducting frame, a ceramic plate having a superconducting metallized area, and a superconducting eyelet for sealing plate into frame. The plate is brazed to eyelet which is then electron beam welded to frame. A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the SRF window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator. 11 figs.

Phillips, H.L.; Elliott, T.S.

1998-05-19T23:59:59.000Z

23

High Performance Window Retrofit  

SciTech Connect (OSTI)

The US Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) and Traco partnered to develop high-performance windows for commercial building that are cost-effective. The main performance requirement for these windows was that they needed to have an R-value of at least 5 ft2 F h/Btu. This project seeks to quantify the potential energy savings from installing these windows in commercial buildings that are at least 20 years old. To this end, we are conducting evaluations at a two-story test facility that is representative of a commercial building from the 1980s, and are gathering measurements on the performance of its windows before and after double-pane, clear-glazed units are upgraded with R5 windows. Additionally, we will use these data to calibrate EnergyPlus models that we will allow us to extrapolate results to other climates. Findings from this project will provide empirical data on the benefits from high-performance windows, which will help promote their adoption in new and existing commercial buildings. This report describes the experimental setup, and includes some of the field and simulation results.

Shrestha, Som S [ORNL; Hun, Diana E [ORNL; Desjarlais, Andre Omer [ORNL

2013-12-01T23:59:59.000Z

24

Adaptive Liquid Crystal Windows  

SciTech Connect (OSTI)

Energy consumption by private and commercial sectors in the U.S. has steadily grown over the last decade. The uncertainty in future availability of imported oil, on which the energy consumption relies strongly, resulted in a dramatic increase in the cost of energy. About 20% of this consumption are used to heat and cool houses and commercial buildings. To reduce dependence on the foreign oil and cut down emission of greenhouse gases, it is necessary to eliminate losses and reduce total energy consumption by buildings. To achieve this goal it is necessary to redefine the role of the conventional windows. At a minimum, windows should stop being a source for energy loss. Ideally, windows should become a source of energy, providing net gain to reduce energy used to heat and cool homes. It is possible to have a net energy gain from a window if its light transmission can be dynamically altered, ideally electronically without the need of operator assistance, providing optimal control of the solar gain that varies with season and climate in the U.S. In addition, the window must not require power from the building for operation. Resolution of this problem is a societal challenge and of national interest and will have a broad global impact. For this purpose, the year-round, allclimate window solution to provide an electronically variable solar heat gain coefficient (SHGC) with a wide dynamic range is needed. AlphaMicron, Inc. (AMI) developed and manufactured 1ft 1ft prototype panels for the worlds first auto-adjusting Adaptive Liquid Crystal Windows (ALCWs) that can operate from sunlight without the need for external power source and demonstrate an electronically adjustable SHGC. This novel windows are based on AlphaMicrons patented e-Tint technology, a guesthost liquid crystal system implemented on flexible, optically clear plastic films. This technology is suitable both for OEM and aftermarket (retro-fitting) lamination to new and existing windows. Low level of power consumption by ALCWs allows for on-board power electronics for automatic matching of transmission through windows to varying climate conditions without drawing the power from the power grid. ALCWs are capable of transmitting more sunlight in winters to assist in heating and less sunlight in summers to minimize overheating. As such, they can change the window from being a source of energy loss to a source of energy gain. In addition, the scalable AMIs roll-to-roll process, proved by making 1ft 1ftALCW prototype panels, allows for cost-effective production of large-scale window panels along with capability to change easily their color and shape. In addition to architectural glazing in houses and commercial buildings, ALCWs can be used in other applications where control of sunlight is needed, such as green houses, used by commercial produce growers and botanical gardens, cars, aircrafts, etc.

Taheri, Bahman; Bodnar, Volodymyr

2011-12-31T23:59:59.000Z

25

Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: NetworkingEnvironment Environment Events Learn aboutEnvironment

26

Windows XP - LPR Printing  

E-Print Network [OSTI]

To print to the math department printers in Windows XP, Print Services for Unix must be ... Page 3 ... The wizard will proceed to install "Print Services for Unix". ... Email systems@math.purdue.edu if you need assistance. D. Brown. 7/26/04.

dbrown

2004-07-27T23:59:59.000Z

27

Superconducting radiofrequency window assembly  

DOE Patents [OSTI]

The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

Phillips, Harry L. (Seaford, VA); Elliott, Thomas S. (Yorktown, VA)

1997-01-01T23:59:59.000Z

28

Superconductive radiofrequency window assembly  

DOE Patents [OSTI]

The present invention is a superconducting radiofrequency window assembly for use in an electron beam accelerator. The srf window assembly (20) has a superconducting metal-ceramic design. The srf window assembly (20) comprises a superconducting frame (30), a ceramic plate (40) having a superconducting metallized area, and a superconducting eyelet (50) for sealing plate (40) into frame (30). The plate (40) is brazed to eyelet (50) which is then electron beam welded to frame (30). A method for providing a ceramic object mounted in a metal member to withstand cryogenic temperatures is also provided. The method involves a new metallization process for coating a selected area of a ceramic object with a thin film of a superconducting material. Finally, a method for assembling an electron beam accelerator cavity utilizing the srf window assembly is provided. The procedure is carried out within an ultra clean room to minimize exposure to particulates which adversely affect the performance of the cavity within the electron beam accelerator.

Phillips, Harry Lawrence (Seaford, VA); Elliott, Thomas S. (Yorktown, VA)

1998-01-01T23:59:59.000Z

29

Carbon smackdown: smart windows  

ScienceCinema (OSTI)

August 3, 2010 Berkeley Lab talk: In the fourth of five Carbon Smackdown matches, Berkeley Lab researchers Delia Milliron of the Materials Sciences Division and Stephen Selkowitz of the Environmental Energy Technologies Division talk about their work on energy-saving smart windows.

Delia Milliron

2010-09-01T23:59:59.000Z

30

Zero Energy Windows  

E-Print Network [OSTI]

impact of 4.1 quadrillion BTU (quads) of primary energy 1 .systems with U-factors of 0.1 Btu/hr-ft-F Dynamic windows:for 1 quadrillion (10 15 ) Btu = 1.056 EJ. percent (Apte,

Arasteh, Dariush; Selkowitz, Steve; Apte, Josh; LaFrance, Marc

2006-01-01T23:59:59.000Z

31

The Window Strategy with Options  

E-Print Network [OSTI]

The window strategy is one of several marketing strategies using futures and options to establish a floor price and allow for upside price potential. It also reduces option premium costs. This publication discusses how the window strategy works...

McCorkle, Dean; Amosson, Stephen H.; Fausett, Marvin

1999-06-23T23:59:59.000Z

32

Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: NetworkingEnvironment Environment Events Learn about our

33

Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: NetworkingEnvironment Environment Events Learn about

34

Performance Criteria for Residential Zero Energy Windows  

E-Print Network [OSTI]

neutral energy impact of windows (energy consumption of buildingneutral energy impact of windows (energy consumption of buildingneutral energy impact of windows (energy consumption of building

Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

2006-01-01T23:59:59.000Z

35

A Review of Electrochromic Window Performance Factors  

E-Print Network [OSTI]

ratio of 0.30. The electrochromic windows were controlled toProceedings. A Review of Electrochromic Window Performanceand economic benefits of electrochromic smart windows,"

Selkowitz Ed, S.E.

2010-01-01T23:59:59.000Z

36

THERMAL PERFORMANCE OF INSULATING WINDOW SYSTEMS  

E-Print Network [OSTI]

these windows incorporating hear mirror films are staticS. , "Thin Film Coatings for Energy Efficient Windows", LBLglazed windows with single and double plastic film inserts

Selkowitz, Stephen E.

2011-01-01T23:59:59.000Z

37

AN ENERGY EFFICIENT WINDOW SYSTEM FINAL REPORT.  

E-Print Network [OSTI]

for a variety of glass window films and so provides thetesting metallized mylar window films. They involve exposingconsumers to install window film products. The rigid sheet

Authors, Various

2011-01-01T23:59:59.000Z

38

Window Replacement, Rehabilitation, & Repair Guides - Building...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Window Replacement, Rehabilitation, & Repair Guides - Building America Top Innovation Effec...

39

Windows | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey Flats Geothermal Areaarticle is a stub.Wind)WindWindows

40

Window Daylighting Demo  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of| Department ofDepartment ofAnnouncementAugust 30,PowerJuneenabledandWindow

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Subject Responses to Electrochromic Windows  

SciTech Connect (OSTI)

Forty-three subjects worked in a private office with switchable electrochromic windows, manually-operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3-60%. Analysis of subject responses and physical data collected during the work sessions showed that the electrochromic windows reduced the incidence of glare compared to working under a fixed transmittance (60%) condition. Subjects used the Venetian blinds less often and preferred the variable transmittance condition, but used slightly more electric lighting with it than they did when window transmittance was fixed.

Clear, Robert; Inkarojrit, Vorapat; Lee, Eleanor

2006-03-03T23:59:59.000Z

42

Microsoft Word - WEP132.rtf  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment SurfacesResource Program Preliminary Needs535:UFC5, 2010 First giant

43

Environment Environment  

E-Print Network [OSTI]

Delivery Economy Community Environment Economy Community Environment Economy Community Environment Environment Climate change programme EconomyCommunity #12;Climate change programme | 2 Climate change is one are described. Finally, the programme explains how the commitments will be delivered and monitored. Environment

44

A window on urban sustainability  

SciTech Connect (OSTI)

Sustainable urban development requires the integration of environmental interests in urban planning. Although various methods of environmental assessment have been developed, plan outcomes are often disappointing due to the complex nature of decision-making in urban planning, which takes place in multiple arenas within multiple policy networks involving diverse stakeholders. We argue that the concept of decision windows can structure this seemingly chaotic chain of interrelated decisions. First, explicitly considering the dynamics of the decision-making process, we further conceptualized decision windows as moments in an intricate web of substantively connected deliberative processes where issues are reframed within a decision-making arena, and interests may be linked within and across arenas. Adopting this perspective in two case studies, we then explored how decision windows arise, which factors determine their effectiveness and how their occurrence can be influenced so as to arrive at more sustainable solutions. We conclude that the integration of environmental interests in urban planning is highly dependent on the ability of the professionals involved to recognize and manipulate decision windows. Finally, we explore how decision windows may be opened. -- Highlights: Decision-making about sustainable urban development occurs in networks. The concept of decision windows was further elaborated. Decision windows help understand how environmental interests enter decision-making. Decision windows can, to some extent, be influenced.

Stigt, Rien van, E-mail: rien.vanstigt@hu.nl [Research Center for Technology and Innovation, Utrecht University of Applied Sciences, P.O. Box 182, 3500 AD Utrecht (Netherlands); Driessen, Peter P.J., E-mail: p.driessen@uu.nl [Copernicus Institute of Sustainable Development, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands); Spit, Tejo J.M., E-mail: T.J.M.Spit@uu.nl [Department of Human Geography and Spatial Planning, Faculty of Geosciences, Utrecht University, P.O. Box 80.115, 3508 TC Utrecht (Netherlands)

2013-09-15T23:59:59.000Z

45

High-Efficiency Window Air Conditioners - Building America Top...  

Broader source: Energy.gov (indexed) [DOE]

Window Air Conditioners - Building America Top Innovation This photo shows a window air conditioning unit in place in a window frame. Window air conditioners are inexpensive,...

46

Transparency: it's not just for windows  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for windows Transparency: it's not just for windows Los Alamos National Laboratory's database of environmental monitoring data is now directly viewable by the public. March 20,...

47

Hydrofluoric acid-resistant composite window and method for its fabrication  

DOE Patents [OSTI]

A hydrofluoric acid-resistant composite window and method for its fabrication are disclosed. The composite window comprises a window having first and second sides. The first side is oriented towards an environment containing hydrofluoric acid. An adhesive is applied to the first side. A layer of transparent hydrofluoric acid-resistant material, such as Mylar, is applied to the adhesive and completely covers the first side. The adhesive is then cured.

Ostenak, C.A.; Mackay, H.A.

1985-07-18T23:59:59.000Z

48

Applicability of Solar Airflow Windows  

E-Print Network [OSTI]

Accurate prediction of the performance of Solar Air Windows (SAWs) operating in various climates under real conditions has not been investigated. This paper reports the results of numerical simulations of SAWs carried out using ANSYS-CFX considering...

Hamed, M. S.; Friedrich, K.; Razaqpur, G.; Foo, S.

2010-01-01T23:59:59.000Z

49

Window-closing safety system  

DOE Patents [OSTI]

A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only and inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

50

Close Window MARCH 3, 2003  

E-Print Network [OSTI]

Close Window MARCH 3, 2003 DEVELOPMENTS TO WATCH Killing Superbugs from Within A common moth may the surface of a flat, thin-film mirror. But these deformable mirror lenses are small--only a few inches

51

Window-closing safety system  

DOE Patents [OSTI]

A safety device includes a wire loop embedded in the glass of a passenger car window and routed near the closing leading-edge of the window. The wire loop carries microwave pulses around the loop to and from a transceiver with separate output and input ports. An evanescent field only an inch or two in radius is created along the wire loop by the pulses. Just about any object coming within the evanescent field will dramatically reduce the energy of the microwave pulses received back by the transceiver. Such a loss in energy is interpreted as a closing area blockage, and electrical interlocks are provided to halt or reverse a power window motor that is actively trying to close the window. 5 figs.

McEwan, T.E.

1997-08-26T23:59:59.000Z

52

CMU-ITC-86-045 , Windowing  

E-Print Network [OSTI]

on window-manager style graphics systems using the Tek termi- nals, inspired by some film Alan Kay showedCMU-ITC-86-045 , Windowing Systems , Implementations #12;#12;Window System Implementations Denver ABSTRACT Notes for a course given at the 1986 Winter Usenix meeting in Denver, CO. It covers window systems

53

Tips: Windows | Department of Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatusButler Tina Butler Tina-Butler.jpgLightingWindows Tips: Windows

54

Porting salinas to the windows platform.  

SciTech Connect (OSTI)

The ASC program has enabled significant development of high end engineering applications on massively parallel machines. There is a great benefit in providing these applications on the desktop of the analysts and designers, at least insofar as the small models may be run on these platforms, thus providing a tool set that spans the application needs. This effort documents the work of porting Salinas to the WINDOWS{trademark} platform. Selection of the tools required to compile, link, test and run Salinas in this environment is discussed. Significant problems encountered along the way are listed along with an estimation of the overall cost of the port. This report may serve as a baseline for streamlining further porting activities with other ASC codes.

Reese, Garth M.; Wilson, Christopher Riley

2006-06-01T23:59:59.000Z

55

Rolling, Rolling, Rolling: Roller Window Shades | Department...  

Broader source: Energy.gov (indexed) [DOE]

anyway, even if our windows were of the highest efficiency. One of my colleagues in a solar energy group I belonged to was a distributor of a high R-value quilted roller window...

56

AIR LEAKAGE OF NEWLY INSTALLED RESIDENTIAL WINDOWS  

E-Print Network [OSTI]

Tables 2.0.2a 2.0.2b PAGE Air Leakage Through Sash/FrameOperation Types . . . . . Air Leakage of Installed WindowsComparison of Window Types Air Leakage Performance of

Weidt, John

2013-01-01T23:59:59.000Z

57

IT Administrator's Guide to Using Windows Vista  

E-Print Network [OSTI]

IT Administrator's Guide to Using Windows Vista® for Sustainable IT Success Published: February Administrator's Guide to Using Windows Vista for Sustainable IT Success Contents Executive Summary ................................................................................................ 3 Sustainable IT Goals

Narasayya, Vivek

58

RUGGED CERAMIC WINDOW FOR RF APPLICATIONS  

SciTech Connect (OSTI)

High-current RF cavities that are needed for many accelerator applications are often limited by the power transmission capability of the pressure barriers (windows) that separate the cavity from the power source. Most efforts to improve RF window design have focused on alumina ceramic, the most popular historical choice, and have not taken advantage of new materials. Alternative window materials have been investigated using a novel Merit Factor comparison and likely candidates have been tested for the material properties which will enable construction in the self-matched window configuration. Window assemblies have also been modeled and fabricated using compressed window techniques which have proven to increase the power handling capability of waveguide windows. Candidate materials have been chosen to be used in fabricating a window for high power testing at Thomas Jefferson National Accelerator Facility.

MIKE NEUBAUER

2012-11-01T23:59:59.000Z

59

An analysis of residential window waterproofing systems  

E-Print Network [OSTI]

The prevalence of vinyl nail-on windows in the North American new home construction market has prompted ASTM International to write ASTM E2112-01 "Standard Practice for Installation of Exterior Windows, Doors and Skylights". ...

Parsons, Austin, 1959-

2004-01-01T23:59:59.000Z

60

Simulating Complex Window Systems using BSDF Data  

E-Print Network [OSTI]

Daylighting, Design tools and methods INTRODUCTION Simulations enable designers and engineers to evaluate and select the best available window solutions

Konstantoglou, Maria

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

A Design Guide for Early-Market Electrochromic Windows  

E-Print Network [OSTI]

Guide for Early-Market Electrochromic Windows. CaliforniaGuide for Early-Market Electrochromic Windows. CaliforniaGUIDE FOR EARLY-MARKET ELECTROCHROMIC WINDOWS Prepared For:

2006-01-01T23:59:59.000Z

62

A Design Guide for Early-Market Electrochromic Windows  

E-Print Network [OSTI]

Office worker preferences of electrochromic windows: a pilotDetails for an Electrochromic Window Wall Attached arethe performance of the electrochromic windows. Proceedings

2006-01-01T23:59:59.000Z

63

Windows and Building Envelope Research and Development Roadmap...  

Broader source: Energy.gov (indexed) [DOE]

Windows and Building Envelope Research and Development Roadmap Windows and Building Envelope Research and Development Roadmap Cover of windows and envelope report, depicting a...

64

Highly Insulating Residential Windows Using Smart Automated Shading...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Highly Insulating Residential Windows Using Smart Automated Shading Highly Insulating Residential Windows Using Smart Automated Shading Addthis 1 of 3 Residential Smart Window with...

65

Rigid thin windows for vacuum applications  

DOE Patents [OSTI]

A thin window that stands off atmospheric pressure is fabricated using photolithographic and wet chemical etching techniques and comprises at least two layers: an etch stop layer and a protective barrier layer. The window structure also comprises a series of support ribs running the width of the window. The windows are typically made of boron-doped silicon and silicon nitride and are useful in instruments such as electron beam guns and x-ray detectors. In an electron beam gun, the window does not impede the electrons and has demonstrated outstanding gun performance and survivability during the gun tube manufacturing process.

Meyer, Glenn Allyn (Danville, CA); Ciarlo, Dino R. (Livermore, CA); Myers, Booth Richard (Livermore, CA); Chen, Hao-Lin (Lafayette, CA); Wakalopulos, George (Pacific Palisades, CA)

1999-01-01T23:59:59.000Z

66

High Reliability R-10 Windows Using Vacuum Insulating Glass Units  

SciTech Connect (OSTI)

The objective of this effort was for EverSealed Windows (EverSealed or ESW) to design, assemble, thermally and environmentally test and demonstrate a Vacuum Insulating Glass Unit (VIGU or VIG) that would enable a whole window to meet or exceed the an R-10 insulating value (U-factor ? 0.1). To produce a VIGU that could withstand any North American environment, ESW believed it needed to design, produce and use a flexible edge seal system. This is because a rigid edge seal, used by all other know VIG producers and developers, limits the size and/or thermal environment of the VIG to where the unit is not practical for typical IG sizes and cannot withstand severe outdoor environments. The rigid-sealed VIGs use would be limited to mild climates where it would not have a reasonable economic payback when compared to traditional double-pane or triple-pane IGs. ESWs goals, in addition to achieving a sufficiently high R-value to enable a whole window to achieve R-10, included creating a VIG design that could be produced for a cost equal to or lower than a traditional triple-pane IG (low-e, argon filled). ESW achieved these goals. EverSealed produced, tested and demonstrated a flexible edge-seal VIG that had an R-13 insulating value and the edge-seal system durability to operate reliably for at least 40 years in the harshest climates of North America.

Stark, David

2012-08-16T23:59:59.000Z

67

Dynamics of window glass fracture in explosions  

SciTech Connect (OSTI)

An exploratory study was conducted under the Architectural Surety Program to examine the possibility of modifying fracture of glass in the shock-wave environment associated with terrorist bombings. The intent was to explore strategies to reduce the number and severity of injuries resulting from those attacks. The study consisted of a series of three experiments at the Energetic Materials Research and Testing Center (EMRTC) of the New Mexico Institute of Mining and Technology at Socorro, NM, in which annealed and tempered glass sheets were exposed to blast waves at several different levels of overpressure and specific impulse. A preliminary assessment of the response of tempered glass to the blast environment suggested that inducing early failure would result in lowering fragment velocity as well as reducing the loading from the window to the structure. To test that possibility, two different and novel procedures (indentation flaws and spot annealing) were used to reduce the failure strength of the tempered glass while maintaining its ability to fracture into small cube-shaped fragments. Each experiment involved a comparison of the performance of four sheets of glass with different treatments.

Beauchamp, E.K.; Matalucci, R.V.

1998-05-01T23:59:59.000Z

68

Window Types | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTankless or Demand-TypeWelcome toFarm Growth Through theofWindow

69

Stanek Windows | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd JumpGTZHolland,0162112°,St. Charles isStallings,StandardizedStanek Windows

70

The energy-savings potential of electrochromic windows in the UScommercial buildings sector  

SciTech Connect (OSTI)

Switchable electrochromic (EC) windows have been projected to significantly reduce the energy use of buildings nationwide. This study quantifies the potential impact of electrochromic windows on US primary energy use in the commercial building sector and also provides a broader database of energy use and peak demand savings for perimeter zones than that given in previous LBNL simulation studies. The DOE-2.1E building simulation program was used to predict the annual energy use of a three-story prototypical commercial office building located in five US climates and 16 California climate zones. The energy performance of an electrochromic window controlled to maintain daylight illuminance at a prescribed setpoint level is compared to conventional and the best available commercial windows as well as windows defined by the ASHRAE 90.1-1999 and California Title 24-2005 Prescriptive Standards. Perimeter zone energy use and peak demand savings data by orientation, window size, and climate are given for windows with interior shading, attached shading, and horizon obstructions (to simulate an urban environment). Perimeter zone primary energy use is reduced by 10-20% in east, south, and west zones in most climates if the commercial building has a large window-to-wall area ratio of 0.60 compared to a spectrally selective low-e window with daylighting controls and no interior or exterior shading. Peak demand for the same condition is reduced by 20-30%. The emerging electrochromic window with daylighting controls is projected to save approximately 91.5-97.3 10{sup 12} Btu in the year 2030 compared to a spectrally selective low-E window with manually-controlled interior shades and no daylighting controls if it reaches a 40% market penetration level in that year.

Lee, Eleanor; Yazdanian, Mehry; Selkowitz, Stephen

2004-04-30T23:59:59.000Z

71

Hybrid window layer for photovoltaic cells  

DOE Patents [OSTI]

A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

Deng, Xunming (Syvania, OH); Liao, Xianbo (Toledo, OH); Du, Wenhui (Toledo, OH)

2011-10-04T23:59:59.000Z

72

Hybrid window layer for photovoltaic cells  

DOE Patents [OSTI]

A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

Deng, Xunming (Syvania, OH)

2010-02-23T23:59:59.000Z

73

Hybrid window layer for photovoltaic cells  

DOE Patents [OSTI]

A novel photovoltaic solar cell and method of making the same are disclosed. The solar cell includes: at least one absorber layer which could either be a lightly doped layer or an undoped layer, and at least a doped window-layers which comprise at least two sub-window-layers. The first sub-window-layer, which is next to the absorber-layer, is deposited to form desirable junction with the absorber-layer. The second sub-window-layer, which is next to the first sub-window-layer, but not in direct contact with the absorber-layer, is deposited in order to have transmission higher than the first-sub-window-layer.

Deng, Xunming (Sylvania, OH); Liao, Xianbo (Toledo, OH); Du, Wenhui (Toledo, OH)

2011-02-01T23:59:59.000Z

74

THERMAL PERFORMANCE OF INSULATING WINDOW SYSTEMS  

E-Print Network [OSTI]

Efficient Use of Energy, New York (1975). Glaser, V.H.J. , "Energy Transport Control in Window Systems", Report ETR-1277-2, Stony Brook, New York, (

Selkowitz, Stephen E.

2011-01-01T23:59:59.000Z

75

A Review of Electrochromic Window Performance Factors  

E-Print Network [OSTI]

influence the market acceptance of electrochromic windowsfor the eventual market success of electrochromic windows inearly niche market might consist of adding an electrochromic

Selkowitz Ed, S.E.

2010-01-01T23:59:59.000Z

76

Laser sealed vacuum insulating window  

DOE Patents [OSTI]

A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the galss panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

Benson, D.K.; Tracy, C.E.

1985-08-19T23:59:59.000Z

77

Laser sealed vacuum insulation window  

DOE Patents [OSTI]

A laser sealed evacuated window panel is comprised of two glass panes held spaced apart in relation to each other by a plurality of spherical glass beads and glass welded around the edges to provide an evacuated space between the glass panes that is completely glass sealed from the exterior. The glass welded edge seal is obtained by welding the edges of the glass panes together with a laser beam while the glass panes and bead spacers are positioned in a vacuum furnace and heated to the annealing point of the glass to avoid stress fracture in the area of the glass weld. The laser welding in the furnace can be directed around the perimeter of the glass panel by a combination of rotating the glass panel and linearly translating or aiming the laser with a relay mirror.

Benson, David K. (Golden, CO); Tracy, C. Edwin (Golden, CO)

1987-01-01T23:59:59.000Z

78

Measure Guideline: Window Repair, Rehabilitation, and Replacement  

SciTech Connect (OSTI)

This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.

Baker, P.

2012-12-01T23:59:59.000Z

79

Windows Enterprise Design Master Directory Sources  

E-Print Network [OSTI]

Windows Enterprise Design Master Directory Sources April 2, 2014 Active Directory information be to use a Microsoft "Outlook" email client to query Active Directory for someone with a certain "last name in Windows Active Directory. It is important the information correctly reflects your current name

Mayfield, John

80

Solar Window Technology for BIPV or  

E-Print Network [OSTI]

Solar Window Technology for BIPV or BAPV Energy Systems Problem this technology solves: Using of Solar energy considerably, photovoltaic or PV material is still a major $ cost/unit of energy produced a novel high efficiency concentrator design, this static "Solar Window" system is such that it allows

Painter, Kevin

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Electrochromic windows for commercial buildings: Monitored results from a full-scale testbed  

E-Print Network [OSTI]

lifetime prediction of electrochromic windows for buildingsenergy performance of electrochromic windows. Proceedingsin the Proceedings. Electrochromic Windows for Commercial

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Selkowitz, Stephen E.

2000-01-01T23:59:59.000Z

82

Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort  

E-Print Network [OSTI]

Energy Performance of Electrochromic Windows Controlled forenergy performance of electrochromic windows. Proceedingssignal for daylight (electrochromic window, no overhang).

Fernandes, Luis

2014-01-01T23:59:59.000Z

83

Design of an Aluminum Proton Beam Window for the Spallation Neutron Source  

SciTech Connect (OSTI)

An aluminum proton beam window design is being considered at the Spallation Neutron Source primarily to increase the lifetime of the window, with secondary advantages of higher beam transport efficiency and lower activation. The window separates the core vessel, the location of the mercury target, from the vacuum of the accelerator, while withstanding the pass through of a proton beam of up to 2 MW with 1.0 GeV proton energy. The current aluminum alloy being investigated for the window material is 6061-T651 due to its combination of high strength, high thermal conductivity, and good resistance to aqueous corrosion, as well as demonstrated dependability in previous high-radiation environments. The window design will feature a thin plate with closely spaced cross drilled cooling holes. An analytical approach was used to optimize the dimensions of the window before finite element analysis was used to simulate temperature profiles and stress fields resulting from thermal and static pressure loading. The resulting maximum temperature of 60 C and Von Mises stress of 71 MPa are very low compared to allowables for Al 6061-T651. A significant challenge in designing an aluminum proton beam window for SNS is integrating the window with the current 316L SS shield blocks. Explosion bonding was chosen as a joining technique because of the large bonding area required. A test program has commenced to prove explosion bonding can produce a robust vacuum joint. Pending successful explosion bond testing, the aluminum proton beam window design will be proven acceptable for service in the Spallation Neutron Source.

Janney, Jim G [ORNL; McClintock, David A [ORNL

2012-01-01T23:59:59.000Z

84

Window Manufacturer Sees Business Surge As Weatherization Supplier...  

Broader source: Energy.gov (indexed) [DOE]

of the aluminum windows they're replacing - the U-value is the measure of the rate of heat loss or gain through a window. The lower the U-value, the better a window's...

85

U-028: Microsoft Windows win32k.sys TrueType Font Parsing Vulnerabilit...  

Broader source: Energy.gov (indexed) [DOE]

Parsing Vulnerability. PLATFORM: Microsoft Windows 7 Microsoft Windows Server 2003 Datacenter Edition Microsoft Windows Server 2003 Enterprise Edition Microsoft Windows Server...

86

Effects of Overhangs on the Performance of Electrochromic Windows  

E-Print Network [OSTI]

issues for large-area electrochromic windows in commercialenergy performance of electrochromic windows controlled forwindows.lbl.gov/comm_perf/Electrochromic/ Winkelmann, F.C. ,

Tavil, Aslihan; Lee, Eleanor S.

2005-01-01T23:59:59.000Z

87

June 1998Program Description Windows and Daylighting Group  

E-Print Network [OSTI]

June 1998Program Description THERM 2.0 Windows and Daylighting Group Building Technologies, and Dariush Arasteh Windows and Daylighting Group Building Technologies Department Environmental Energy

88

Assessment of Energy Impact of Window Technologies for Commercial Buildings  

E-Print Network [OSTI]

1.2 quads. Future window technologies offer energy savingsImpact of Window Technologies for Commercial BuildingsEnvironmental Energy Technologies Division October 2009 This

Hong, Tianzhen

2014-01-01T23:59:59.000Z

89

700 MHz window R & D at LBNL  

E-Print Network [OSTI]

LBNL-47939 LAUR 01-2574 CBP tech230 700 MHz Window R&D at LBNL R. Rimmer, G. Koehler, T.describes the R&D activities at LBNL under contract # 06261-

Rimmer, R.A.; Koehler, G.; Saleh, T.; Weidenbach, R.

2000-01-01T23:59:59.000Z

90

Occupant Response to Window Control Signaling Systems  

E-Print Network [OSTI]

my window it will waste energy. Even so I open the windowthe windown wouldnt waste energy. MS Thesis, Dept. ofthepotentialforenergywasteandbalancingissues.

Ackerly, Katherine

2012-01-01T23:59:59.000Z

91

NREL Electrochromic Window Research Wins Award  

ScienceCinema (OSTI)

Winners of the CO-LABS Governor's Award for High-Impact Research in Energy Efficiency, Dr. Satyen Deb at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) discovered that a small electrical charge can change the opacity of tungsten oxide from clear to tinted. He, Dr. Dane Gillaspie, and their fellow scientists at NREL then applied this knowledge to develop and transfer the technologies required to construct an electrochromic window, which can switch between clear and heavily tinted states. Electrochromic windows allow natural light in while adding tint to reduce summer heat and glare, and going clear to allow sunlight through in the winter. Broad adaptation of these windows could reduce US total energy use by four percent and reduce building cooling loads by 20%, much of this during expensive peak hours. Windows based on these discoveries are now being installed worldwide.

None

2013-05-29T23:59:59.000Z

92

Electrochromic sun control coverings for windows  

SciTech Connect (OSTI)

The 2 billion square meters (m{sup 2}) of building windows in the United States cause a national energy drain almost as large as the energy supply of the Alaskan oil pipeline. Unlike the pipeline, the drain of energy through windows will continue well into the 21st century. A part of this energy drain is due to unwanted sun gain through windows. This is a problem throughout the country in commercial buildings because they generally require air conditioning even in cold climates. New commercial windows create an additional 1600 MW demand for peak electric power in the United States each year. Sun control films, widely used in new windows and as retrofits to old windows, help to mitigate this problem. However, conventional, static solar control films also block sunlight when it is wanted for warmth and daylighting. New electrochromic, switchable, sun-gain-control films now under development will provide more nearly optimal and automatic sun control for added comfort, decreased building operating expense, and greater energy saving. Switchable, electrochromic films can be deposited on polymers at high speeds by plasma enhanced chemical vapor deposition (PECVD) in a process that may be suitable for roll coating. This paper describes the electrochromic coatings and the PECVD processes, and speculates about their adaptability to high-speed roll coating. 8 refs., 3 figs.

Benson, D K; Tracy, C E

1990-04-01T23:59:59.000Z

93

Transforming the market for residential windows: design considerations for DOE's Efficient Window Collaborative  

SciTech Connect (OSTI)

Market adoption of recent, commercially available technological advances that improve the energy performance of windows will lead to immediate economic and energy savings benefits to the nation. This paper is a scoping study intended to inform the design of a major DOE initiative to accelerate market adoption of these windows in the residential sector. We describe the structure of the US residential window market and the interests of the various market players. We then briefly review five recent market transformation initiatives. Finally, we summarize our findings in a list of considerations we believe will be important for the DOE's initiative to transform the US residential window market.

Eto, J.; Arasteh, D.; Selkowitz, S.

1998-08-01T23:59:59.000Z

94

Assessment of Energy Impact of Window Technologies for Commercial Buildings  

E-Print Network [OSTI]

electrochromic windows were technically successful, but it will take a number of years for significant market

Hong, Tianzhen

2014-01-01T23:59:59.000Z

95

Cosmic Microwave Background Anisotropy Window Functions Revisited  

E-Print Network [OSTI]

The primary results of most observations of cosmic microwave background (CMB) anisotropy are estimates of the angular power spectrum averaged through some broad band, called band-powers. These estimates are in turn what are used to produce constraints on cosmological parameters due to all CMB observations. Essential to this estimation of cosmological parameters is the calculation of the expected band-power for a given experiment, given a theoretical power spectrum. Here we derive the "band power" window function which should be used for this calculation, and point out that it is not equivalent to the window function used to calculate the variance. This important distinction has been absent from much of the literature: the variance window function is often used as the band-power window function. We discuss the validity of this assumed equivalence, the role of window functions for experiments that constrain the power in {\\it multiple} bands, and summarize a prescription for reporting experimental results. The analysis methods detailed here are applied in a companion paper to three years of data from the Medium Scale Anisotropy Measurement.

Lloyd Knox

1999-09-28T23:59:59.000Z

96

Apparatus for insulating windows and the like  

DOE Patents [OSTI]

Apparatus for insulating window openings through walls and the like includes a thermal shutter, a rail for mounting the shutter adjacent to the window opening and a coupling for connecting the shutter to the rail. The thermal shutter includes an insulated panel adhered to frame members which surround the periphery of the panel. The frame members include a hard portion for providing the frame and a soft portion for providing a seal with that portion of the wall adjacent to the periphery of the opening. The coupling means is preferably integral with the attachment rail. According to a preferred embodiment, the coupling means includes a continuous hinge of reduced thickness. The thermal shutter can be permanently attached, hinged, bi-folded, or sliding with respect to the window and wall. A distribution method is to market the apparatus in "kit" form.

Mitchell, Robert A. (R.D. #1, Box 462-A, Voorheesville, NY 12186)

1984-01-01T23:59:59.000Z

97

Solar optical materials for innovative window design  

SciTech Connect (OSTI)

New and innovative optical materials and coatings can greatly improve the efficiency of window energy systems. These potential materials and coatings increase energy efficiency by reducing radiative losses in the infrared, or reducing visible reflection losses or controlling overheating due to solar gain. Current progress in heat mirror coatings for glass and polymeric substrates is presented. Highly doped semiconducting oxides and metal/dielectric interference coatings are reviewed. Physical and optical properties are outlined for antireflection films and transparent aerogel insulation media. The potential for optical switching films as window elements includes discussions of electrochromic, photochromic and other physical switching processes.

Lampert, C.M.

1982-08-01T23:59:59.000Z

98

Energy-Efficient Windows | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011District |Department ofEnergy andWindowWindows

99

T-608: HP Virtual Server Environment Lets Remote Authenticated Users Gain Elevated Privileges  

Broader source: Energy.gov [DOE]

A potential security vulnerability has been identified in HP Virtual Server Environment for Windows. The vulnerability could be exploited remotely to elevate privileges.

100

The Current T2K Beam Window  

E-Print Network [OSTI]

Downstream Helium velocity 5 m/s Heat transfer coefficient 150 W/m2K #12;Helium flow grooves He in He out at KEK (via Oak Ridge via PSI). #12;Assembled Window #12;Remote Handling #12;Remote handling Monitor Chamber (Canada) Target Station (Japan) #12;Remote installation #12;Stress analysis and upgrade potential

McDonald, Kirk

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Occupant Response to Window Control Signaling Systems  

E-Print Network [OSTI]

preventing energy waste during the red light mode is a moregreen lights was installed to help avoid energy waste, or inlight means that energy is being used to modify the temparature inside and therefore if I open my window it will waste energy.

Ackerly, Katherine

2012-01-01T23:59:59.000Z

102

Highly Insulating Residential Windows Using Smart Automated Shading...  

Office of Environmental Management (EM)

The windows will function autonomously and in a networked configuration. Project Impact LBNL is aiming toward a mature market cost increment of 12ft2 of window. LBNL will also...

103

Energy Efficiency Hits from the Doors (and Windows) | Department...  

Broader source: Energy.gov (indexed) [DOE]

Energy Efficiency Hits from the Doors (and Windows) Energy Efficiency Hits from the Doors (and Windows) December 5, 2011 - 5:31am Addthis Ernie Tucker Editor, National Renewable...

104

Modeling Windows in Energy Plus with Simple Performance Indices  

E-Print Network [OSTI]

that window U-factors include the interior and exterior filmwindows however, Steps 1 and 5 which use interior filmthese film coefficients to a resistance for the solid window

Arasteh, Dariush

2010-01-01T23:59:59.000Z

105

Infrared Thermography Measurements of Window Thermal Test Specimen Surface Temperatures  

E-Print Network [OSTI]

Infrared Thermography Measurements of Window Thermal Test Specimen Surface Temperatures Brent T Temperatures of Window Specimens: Infrared Thermography Laboratory Measurements Brent T. Griffith1 , Howdy and cold sides, respectively. Surface temperature maps were compiled using an infrared thermographic system

106

Window and Envelope Technologies Overview - 2014 BTO Peer Review...  

Energy Savers [EERE]

Research and Development Roadmap: Windows and Building Envelope Research & Development Roadmap: Emerging Water Heating Technologies Research & Development Roadmap: Emerging HVAC...

107

The Impact of Overhang Design on the Performance of Electrochromic Windows  

E-Print Network [OSTI]

Issues for Large-area Electrochromic Windows in CommercialAnalysis of Prototype Electrochromic Windows, ASHRAEon the Performance of Electrochromic Windows Asilhan Tavil

Tavil, Aslihan; Lee, Eleanor S.

2005-01-01T23:59:59.000Z

108

The energy-savings potential of electrochromic windows in the US commercial buildings sector  

E-Print Network [OSTI]

Alone Photovoltaic-Powered Electrochromic Smart Window.Subject responses to electrochromic windows. To be publishedAnalysis of Prototype Electrochromic Windows, ASHRAE

Lee, Eleanor; Yazdanian, Mehry; Selkowitz, Stephen

2004-01-01T23:59:59.000Z

109

End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application  

E-Print Network [OSTI]

2006. Advancement of electrochromic windows: Final report.User Impacts of Automated Electrochromic Windows in a Pilotenergy performance of electrochromic windows controlled for

Lee, Eleanor S.

2014-01-01T23:59:59.000Z

110

AEROSPACE TECHNOLOGY REVIEW FOR LBL WINDOW/PASSIVE SOLAR PROGRAM FINAL REPORT  

E-Print Network [OSTI]

TI Reflective Solar Control Film on Windows Gains AcceptancelReflective Solar Control Film on Windows Gains Acceptance",optical window shutter, the cholesteric liquid crystal film

Viswanathan, R.

2011-01-01T23:59:59.000Z

111

Performance Criteria for Residential Zero Energy Windows  

SciTech Connect (OSTI)

This paper shows that the energy requirements for today's typical efficient window products (i.e. ENERGY STAR{trademark} products) are significant when compared to the needs of Zero Energy Homes (ZEHs). Through the use of whole house energy modeling, typical efficient products are evaluated in five US climates and compared against the requirements for ZEHs. Products which meet these needs are defined as a function of climate. In heating dominated climates, windows with U-factors of 0.10 Btu/hr-ft{sup 2}-F (0.57 W/m{sup 2}-K) will become energy neutral. In mixed heating/cooling climates a low U-factor is not as significant as the ability to modulate from high SHGCs (heating season) to low SHGCs (cooling season).

Arasteh, Dariush; Goudey, Howdy; Huang, Joe; Kohler, Christian; Mitchell, Robin

2006-10-09T23:59:59.000Z

112

End User Impacts of Automated Electrochromic Windows in a Pilot  

E-Print Network [OSTI]

LBNL-6027E End User Impacts of Automated Electrochromic Windows in a Pilot Retrofit Application E Electrochromic Windows in a Pilot Retrofit Application Eleanor S. Lee1 Abstract , Erin S. Claybaugh Building Independence Avenue, S.W., Washington, DC 20585 USA Automated electrochromic (EC) windows, advanced thermally

113

Versatile electrowetting arrays for smart window applications-from small to large pixels on fixed and flexible substrates  

E-Print Network [OSTI]

on polymer polyethylene terephthalate (PET) substrates, which can be switched reversibly by applying in energy consumption and issues of global warming and environment pollution are increasing windows may drastically reduce the energy consumption of buildings by reducing cooling and heating loads

Steckl, Andrew J.

114

Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort  

E-Print Network [OSTI]

absorptive electrochromic (EC) windows tested were market-electrochromic windows that were deemed sufficiently mature for market

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

2005-01-01T23:59:59.000Z

115

Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort  

E-Print Network [OSTI]

Subject responses to electrochromic windows. Submitted toin a full-scale electrochromic window testbed. Technicaloptimization of electrochromic operations for occupant

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

2005-01-01T23:59:59.000Z

116

List of Windows Incentives | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpInc Place:KeystoneSolarList ofPassiveMachine ControlsWindows

117

Developing Low-Conductance Window Frames: Capabilities and Limitations of Current Window Heat Transfer Design Tools  

E-Print Network [OSTI]

Transfer Design Tools Arild Gustavsen1,* , Dariush Arasteh2 , Bjørn Petter Jelle3,4 , Charlie Curcija5-conductance window frames requires accurate simulation tools for product research and development. Based and develop recommendation for inclusion into the design fenestration tools. 3. Assess existing correlations

118

Energy Efficient Electrochromic Windows Incorporating Ionic Liquids  

SciTech Connect (OSTI)

One approach to increasing the energy efficiency of windows is to control the amount of solar radiation transmitted through a window by using electrochromic technology. What is unique about this project is that the electrochromic is based on the reduction/oxidation reactions of cathodic and anodic organic semi-conducting polymers using room temperature ionic liquids as ion transport electrolytes. It is believed that these types of coatings would be a lower cost alternative to traditional all inorganic thin film based electrochromic technologies. Although there are patents1 based on the proposed technology, it has never been reduced to practice and thoroughly evaluated (i.e. durability and performance) in a window application. We demonstrate that by using organic semi-conductive polymers, specific bands of the solar spectrum (specifically visible and near infrared) can be targeted for electrochemical variable transmittance responsiveness. In addition, when the technology is incorporated into an insulating glass unit, the energy parameters such as the solar heat gain coefficient and the light to solar gain ratio are improved over that of a typical insulating glass unit comprised of glass with a low emissivity coating. A minimum of {approx}0.02 quads of energy savings per year with a reduction of carbon emissions for electricity of {approx}320 MKg/yr benefit is achieved over that of a typical insulating glass unit including a double silver low-E coating. Note that these values include a penalty in the heating season. If this penalty is removed (i.e. in southern climates or commercial structures where cooling is predominate year-round) a maximum energy savings of {approx}0.05 quad per year and {approx}801 MKg/yr can be achieved over that of a typical insulating glass unit including a double silver low-E coating. In its current state, the technology is not durable enough for an exterior window application. The primary downfall is that the redox chemistry fails to recover to a bleached state upon exposure to heat and solar radiation while being cycled over time from the bleached to the dark state. Most likely the polymers are undergoing degradation reactions which are accelerated by heat and solar exposure while in either the reduced or oxidized states and the performance of the polymers is greatly reduced over time. For this technology to succeed in an exterior window application, there needs to be more work done to understand the degradation of the polymers under real-life application conditions such as elevated temperatures and solar exposure so that recommendations for improvements in to the overall system can be made. This will be the key to utilizing this type of technology in any future real-life applications.

Cheri Boykin; James Finley; Donald Anthony; Julianna Knowles; Richard Markovic; Michael Buchanan; Mary Ann Fuhry; Lisa Perrine

2008-11-30T23:59:59.000Z

119

Measure Guideline: Energy-Efficient Window Performance and Selection  

SciTech Connect (OSTI)

This document provides guidelines for the selection of energy-efficient windows in new and existing residential construction in all US climate zones. It includes information on window products, their attributes and performance. It provides cost/benefit information on window energy savings as well as information on non-energy benefits such as thermal comfort and reduced HVAC demands. The document also provides information on energy impacts of design decisions such as window orientation, total glazing area and shading devices and conditions. Information on resources for proper window installation is included as well. This document is for builders, homeowners, designers and anyone making decisions about selecting energy efficient window. It is intended to complement other Building America information and efforts.

Carmody, J.; Haglund, K.

2012-11-01T23:59:59.000Z

120

Stand-alone photovoltaic (PV) powered electrochromic window  

DOE Patents [OSTI]

A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired.

Benson, David K. (Golden, CO); Crandall, Richard S. (Boulder, CO); Deb, Satyendra K. (Boulder, CO); Stone, Jack L. (Lakewood, CO)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Stand-alone photovoltaic (PV) powered electrochromic window  

DOE Patents [OSTI]

A variable transmittance double pane window includes an electrochromic material that has been deposited on one pane of the window in conjunction with an array of photovoltaic cells deposited along an edge of the pane to produce the required electric power necessary to vary the effective transmittance of the window. A battery is placed in a parallel fashion to the array of photovoltaic cells to allow the user the ability to manually override the system when a desired transmittance is desired. 11 figures.

Benson, D.K.; Crandall, R.S.; Deb, S.K.; Stone, J.L.

1995-01-24T23:59:59.000Z

122

Highly Insulating Windows Volume Purchase Program Final Report  

SciTech Connect (OSTI)

This report summarizes the Highly Insulating Windows Volume Purchase Program, conduced by PNNL for DOE-BTP, including a summary of outcomes and lessons learned.

Parker, Graham B.; Mapes, Terry S.; Zalis, WJ

2013-02-01T23:59:59.000Z

123

A Design Guide for Early-Market Electrochromic Windows  

E-Print Network [OSTI]

of a thin-film ceramic electrochromic window: Field studywindows in a bleached state (left) or colored state (right). Electrochromic coatings (EC) are switchable thin-film

2006-01-01T23:59:59.000Z

124

The robust vehicle routing problem with time windows  

E-Print Network [OSTI]

Oct 2, 2012 ... Abstract: This paper addresses the robust vehicle routing problem with time windows. We are motivated by a problem that arises in maritime...

Agostinho Agra

2012-10-02T23:59:59.000Z

125

Robust Inventory Routing with Flexible Time Window Allocation  

E-Print Network [OSTI]

Jan 15, 2015 ... Abstract: This paper studies a robust maritime inventory routing problem with time windows and stochastic travel times. One of the novelties of...

Chengliang Zhang

2015-01-15T23:59:59.000Z

126

Impacts of Operating Hardware on Window Thermal Performance  

E-Print Network [OSTI]

and Renewable Energy, Office of Building Technology,Building Technologies Program of the U.S. Department ofproject Improved Window Technologies for Energy Efficient

Hart, Robert

2014-01-01T23:59:59.000Z

127

Isocurvature forecast in the anthropic axion window  

E-Print Network [OSTI]

We explore the cosmological sensitivity to the amplitude of isocurvature fluctuations that would be caused by axions in the "anthropic window" where the axion decay constant f_a >> 10^12 GeV and the initial misalignment angle Theta_i << 1. In a minimal Lambda-CDM cosmology extended with subdominant scale-invariant isocurvature fluctuations, existing data constrain the isocurvature fraction to alpha < 0.09 at 95% C.L. If no signal shows up, Planck can improve this constraint to 0.042 while an ultimate CMB probe limited only by cosmic variance in both temperature and E-polarisation can reach 0.017, about a factor of five better than the current limit. In the parameter space of f_a and H_I (Hubble parameter during inflation) we identify a small region where axion detection remains within the reach of realistic cosmological probes.

J. Hamann; S. Hannestad; G. G. Raffelt; Y. Y. Y. Wong

2009-06-16T23:59:59.000Z

128

MAVIS III -- A Windows 95/NT Upgrade  

SciTech Connect (OSTI)

MAVIS (Modeling and Analysis of Explosive Valve Interactions) is a computer program that simulates operation of explosively actuated valve. MAVIS was originally written in Fortran in the mid 1970`s and was primarily run on the Sandia Vax computers in use through the early 1990`s. During the mid to late 1980`s MAVIS was upgraded to include the effects of plastic deformation and it became MAVIS II. When the Vax computers were retired, the Gas Transfer System (GTS) Development Department ported the code to the Macintosh and PC platforms, where it ran as a simple console application. All graphical output was lost during these ports. GTS code developers recently completed an upgrade that provides a Windows 95/NT MAVIS application and restores all of the original graphical output. This upgrade is called MAVIS III version 1.0. This report serves both as a user`s manual for MAVIS III v 1.0 and as a general software development reference.

Hardwick, M.F. [Sandia National Labs., Livermore, CA (United States). GTS Engineering Dept.

1997-12-01T23:59:59.000Z

129

Managing coherence via put/get windows  

DOE Patents [OSTI]

A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Hoenicke, Dirk (Ossining, NY); Ohmacht, Martin (Yorktown Heights, NY)

2011-01-11T23:59:59.000Z

130

Simulating Complex Window Systems using BSDF Data  

SciTech Connect (OSTI)

Nowadays, virtual models are commonly used to evaluate the performance of conventional window systems. Complex fenestration systems can be difficult to simulate accurately not only because of their geometry but also because of their optical properties that scatter light in an unpredictable manner. Bi-directional Scattering Distribution Functions (BSDF) have recently been developed based on a mixture of measurements and modelling to characterize the optics of such systems. This paper describes the workflow needed to create then use these BSDF datasets in the Radiance lighting simulation software. Limited comparisons are made between visualizations produced using the standard ray-tracing method, the BSDF method, and that taken in a full-scale outdoor mockup.

Konstantoglou, Maria; Jonsson, Jacob; Lee, Eleanor

2009-06-22T23:59:59.000Z

131

Managing coherence via put/get windows  

DOE Patents [OSTI]

A method and apparatus for managing coherence between two processors of a two processor node of a multi-processor computer system. Generally the present invention relates to a software algorithm that simplifies and significantly speeds the management of cache coherence in a message passing parallel computer, and to hardware apparatus that assists this cache coherence algorithm. The software algorithm uses the opening and closing of put/get windows to coordinate the activated required to achieve cache coherence. The hardware apparatus may be an extension to the hardware address decode, that creates, in the physical memory address space of the node, an area of virtual memory that (a) does not actually exist, and (b) is therefore able to respond instantly to read and write requests from the processing elements.

Blumrich, Matthias A. (Ridgefield, CT); Chen, Dong (Croton on Hudson, NY); Coteus, Paul W. (Yorktown Heights, NY); Gara, Alan G. (Mount Kisco, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Hoenicke, Dirk (Ossining, NY); Ohmacht, Martin (Yorktown Heights, NY)

2012-02-21T23:59:59.000Z

132

INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS  

SciTech Connect (OSTI)

The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

Michael Arney, Ph.D.

2002-12-31T23:59:59.000Z

133

Radiation-transparent windows, method for imaging fluid transfers  

DOE Patents [OSTI]

A thin, x-ray-transparent window system for environmental chambers involving pneumatic pressures above 40 bar is presented. The window allows for x-ray access to such phenomena as fuel sprays injected into a pressurized chamber that mimics realistic internal combustion engine cylinder operating conditions.

Shu, Deming (Darien, IL); Wang, Jin (Burr Ridge, IL)

2011-07-26T23:59:59.000Z

134

Avalanches through windows: Multiscale visualization in magnetic thin films  

E-Print Network [OSTI]

Avalanches through windows: Multiscale visualization in magnetic thin films Alessandro Magni, Cornell University, Ithaca, NY 14853-2501 Abstract--The dynamics of domain walls motion in thin films dynamics, but are strongly dependent on the size of the windows chosen. Here we investigate how to properly

Sethna, James P.

135

Benefits of Windows Small Business Server Code Name "Aurora"  

E-Print Network [OSTI]

Benefits of Windows Small Business Server Code Name "Aurora" includes: Daily automatic backups Business Server Code Name "Aurora" provides an easy-to-use solution ideal for first server small businesses with up to 25 users, Windows Small Business Server Code Name "Aurora" provides a cost-effective and easy

Hunt, Galen

136

Validation of the Window Model of the Modelica Buildings Library  

E-Print Network [OSTI]

LBNL-5735E Validation of the Window Model of the Modelica Buildings Library Thierry Stephane MODEL OF THE MODELICA BUILDINGS LIBRARY Thierry Stephane Nouidui, Michael Wetter, and Wangda Zuo the validation of the window model of the free open-source Modelica Buildings library. This paper starts

137

Budget Windows, Sunsets and Fiscal Control Alan J. Auerbach  

E-Print Network [OSTI]

Budget Windows, Sunsets and Fiscal Control Alan J. Auerbach University of California, Berkeley have struggled to find the right method of controlling public spending and budget deficits. In recent years, the United States has evaluated policy changes using a ten-year budget window. The use of a multi

Sadoulet, Elisabeth

138

Boron nitride protective coating of beryllium window surfaces  

SciTech Connect (OSTI)

The use of beryllium windows on white synchrotron radiation beamlines is constrained by the fact that the downstream surfaces of these windows should not be exposed to ambient atmosphere. They should, rather, be protected by a tail-piece under vacuum or containing helium atmosphere. This tailpiece is typically capped by Kapton (3M Corporation, St. Paul, MN) or aluminum foil. The reason for such an arrangement is due to the health risk associated with contaminants (BeO) which from on the exposed beryllium window surfaces and due to possible loss of integrity of the windows. Such a tail-piece may, however, add unwanted complications to the beamline in the form of vacuum pumps or helium supplies and their related monitoring systems. The Kapton windows may burn through in the case of high intensity beams and lower energy radiation may be absorbed in the case of aluminum foil windows. A more ideal situation would be to provide a coating for the exposed beryllium window surface, sealing it off from the atmosphere, thus preventing contamination and/or degradation of the window, and eliminating the need for helium or vacuum equipment.

Gmuer, N.F.

1991-12-01T23:59:59.000Z

139

Demographic Window, H. G. Muller et al. 1 Demographic Window to Aging in the Wild: Constructing Life  

E-Print Network [OSTI]

Demographic Window, H. G. M¨uller et al. 1 Demographic Window to Aging in the Wild: Constructing for wild populations. A demographic key identity is established that leads to a method whereby age identity is established for the continuous case where the survival schedule of the wild population

Müller, Hans-Georg

140

A diamond-window XAFS cell for studies of high-temperature, high-pressure aqueous solutions  

SciTech Connect (OSTI)

We describe a method to collect x-ray absorption fine structure (XAFS) spectra of ions in a supercritical water solvent. Supercritical water (SCW), at temperatures above water{close_quote}s critical point of 374{degree}C, is an interesting solvent for chemical reactions and hazardous waste destruction due to the high solubility of organics and the aggressive oxidizing environment. XAFS may provide a better understanding of the solvent environment in SCW. The XAFS cell used in these studies was composed of a block of high-nickel alloy, Hastelloy C-22, containing two windows for transmission of the x-ray beam and a single optical view window. All internal wetted surfaces were platinum plated. The maximum operating conditions for this design were 500{degree}C and 700 bar. The x-ray transmission windows consisted of CVD (chemical vapor deposition) diamond windows (3 mm diameter {times}0.5 mm thick) that were brazed to the tip of a standard 1/4-in. high-pressure, coned-shape fitting. Spectra are reported for strontium and rubidium ions in a supercritical water solvent. This cell design could be used for a variety of other solvent systems at high temperatures and high pressures. {copyright} {ital 1996 American Institute of Physics.}

Fulton, J.L.; Pfund, D.M. [Chemical Sciences Department, Pacific Northwest Laboratory, Richland, WA 99352 (United States)] [Chemical Sciences Department, Pacific Northwest Laboratory, Richland, WA 99352 (United States); Ma, Y. [Brookhaven National Laboratory, Bldg 510 E, Upton, NY 11973 (United States)] [Brookhaven National Laboratory, Bldg 510 E, Upton, NY 11973 (United States)

1996-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed  

E-Print Network [OSTI]

of a microstructured prismatic window film in deep open plandaylight- redirecting window film in a full-scale officedaylight- redirecting window film in a full-scale office

Thanachareonkit, Anothai

2014-01-01T23:59:59.000Z

142

Experimental evaluation of the in-plane seismic behavior of store-front window systems  

E-Print Network [OSTI]

was conducted. The window film (WF) series included 5x5damage states. When the window film is attached using theThe safety aspects of window film were very evident during

Eva, Charles Almond

2009-01-01T23:59:59.000Z

143

U-032: Microsoft Security Bulletin Windows TCP/IP MS11-083 -...  

Broader source: Energy.gov (indexed) [DOE]

Server 2003 Service Pack 2 Windows Server 2003 x64 Edition Service Pack 2 Active Directory Windows Server 2003 with SP2 for Itanium-based Systems Windows Vista Service Pack 2...

144

Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames  

E-Print Network [OSTI]

windows are often called passive -house wind ows, as windowse window frames, like passive-house windows. In this p aperare supposed to satisfy the Passive house requirements of

Gustavsen Ph.D., Arild

2010-01-01T23:59:59.000Z

145

Windows Server 2012 R2 Licensing Datasheet  

E-Print Network [OSTI]

automation plus storage and networking virtualization solutions based on industry-standard hardware. It lets you build, run, and scale applications that can move between your datacenter and the cloud, and allows-virtualized or lightly virtualized environments. Essentials edition for small businesses with up to 25 users running

Chaudhuri, Surajit

146

Ultra high vacuum broad band high power microwave window  

DOE Patents [OSTI]

An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost.

Nguyen-Tuong, Viet (Seaford, VA); Dylla, III, Henry Frederick (Yorktown, VA)

1997-01-01T23:59:59.000Z

147

Ultra high vacuum broad band high power microwave window  

DOE Patents [OSTI]

An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost. 5 figs.

Nguyen-Tuong, V.; Dylla, H.F. III

1997-11-04T23:59:59.000Z

148

Photo of the Week: The First Energy-Efficient Dual-Paned Windows...  

Broader source: Energy.gov (indexed) [DOE]

Lab helped develop the first energy-efficient dual-paned windows, now used in buildings and homes worldwide for billions of dollars in energy savings. Current windows...

149

State-of-the-Art Highly Insulating Window Frames - Research and Market Review  

E-Print Network [OSTI]

through vacuum and electrochromic vacuum glazed windows,technologies, such as an electrochromic vacuum glazedof rebate depth on an electrochromic vacuum glazed window.

Gustavsen, Arild

2008-01-01T23:59:59.000Z

150

Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort  

E-Print Network [OSTI]

Windows Controlled for Daylight and Visual Comfort Eleanorof means to bring in daylight while minimizing window glare.was controlled to admit daylight while the lower zone was

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

2005-01-01T23:59:59.000Z

151

Switchable window based on electrochromic polymers Chunye Xu,a)  

E-Print Network [OSTI]

Switchable window based on electrochromic polymers Chunye Xu,a) Lu Liu, Susan E. Legenski, Dai Ning March 2004) A large contrast ratio (> 60%) and rapid switching (0.3­1 s) electrochromic (EC) polymer

Taya, Minoru

152

Hydrogen Safety Project: Chemical analysis support task. Window ``E`` analyses  

SciTech Connect (OSTI)

Core samples taken from tank 101-SY at Hanford during ``window E`` were analyzed for organic and radiochemical constituents by staff of the Analytical Chemistry Laboratory at Pacific Northwest Laboratory. Westinghouse Hanford company submitted these samples to the laboratory.

Jones, T.E.; Campbell, J.A.; Hoppe, E.W.; Greenwood, L.R.; Gillespie, B.M.

1992-09-01T23:59:59.000Z

153

A Design Guide for Early-Market Electrochromic Windows  

SciTech Connect (OSTI)

Switchable variable-tint electrochromic (EC) windows preserve view out while modulating transmitted light, glare, and solar heat gains. Consumers will require objective information on the risks and benefits of this emerging technology as it enters the market in 2006. This guide provides such information and data derived from a wide variety of simulations, laboratory tests, and a 2.5-year field test of prototype large-area EC windows evaluated under outdoor sun and sky conditions. This design guide is provided to architects, engineers, building owners, and others interested in electrochromic windows. The design guide provides basic information about what is an electrochromic window, what it looks like, how fast does it switch, and what current product offerings are. The guide also provides information on performance benefits if more mature product offerings were available.

Lee, Eleanor S.; Selkowitz, Stephen E.; Clear, Robert D.; DiBartolomeo, Dennis L.; Klems, Joseph H.; Fernandes, Luis L.; Ward, GregJ.; Inkarojrit, Vorapat; Yazdanian, Mehry

2006-05-01T23:59:59.000Z

154

Building America Expert Meeting: Windows Options for New and...  

Broader source: Energy.gov (indexed) [DOE]

The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the...

155

Pennsylvania: New Series of Windows Has Potential to Save Energy...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

windows such as the OptiQ(tm) provide commercial building owners and operators with more energy efficient options to reduce heating and cooling expenses. The introduction of the...

156

Performance Testing of Window Installation and Flashing Details  

E-Print Network [OSTI]

and proposed installation practices incorporating new flashing materials. This paper focuses specifically on the installation practices relating to windows with mounting fins or flanges. REVIEW OF CURRENT PRACTICES AND ATTITUDES Interviews with builders... into two categories based on the how the flashing and the rough opening is treated. g167g32 2-Dimensional Methods: using flashing to extend protection around the perimeter of the window flanges on to the face of the sheathing, and g167g32 3...

Weston, T. A.; Herrin, J.

2002-01-01T23:59:59.000Z

157

Improving the thermal performance of the US residential window stock  

SciTech Connect (OSTI)

Windows have typically been the least efficient thermal component in the residential envelope, but technology advances over the past decade have helped to dramatically improve the energy efficiency of window products. While the thermal performance of these advanced technology windows can be easily characterized for a particular building application, few precise estimates exist of their aggregate impact on national or regional energy use. Policy-makers, utilities, researchers and the fenestration industry must better understand these products` ultimate conservation potential in order to determine the value of developing new products and initiating programs to accelerate their market acceptance. This paper presents a method to estimate the conservation potential of advanced window technologies, combining elements of two well-known modeling paradigms: supply curves of conserved energy and residential end-use forecasting. The unique features include: detailed descriptions of the housing stock by region and vintage, state-of-the-art thermal descriptions of window technologies, and incorporation of market effects to calculate achievable conservation potential and timing. We demonstrate the methodology by comparing, for all new houses built between 1990 and 2010, the conservation potential of very efficient, high R-value ``superwindows`` in the North Central federal region and spectrally-selective low-emissivity (moderate Revalue and solar transmittance) windows in California.

Brown, R.E.; Arasteh, D.K.; Eto, J.H.

1992-05-01T23:59:59.000Z

158

Performance of a multifunctional PV/T hybrid solar window  

SciTech Connect (OSTI)

A building-integrated multifunctional PV/T solar window has been developed and evaluated. It is constructed of PV cells laminated on solar absorbers placed in a window behind the glazing. To reduce the cost of the solar electricity, tiltable reflectors have been introduced in the construction to focus radiation onto the solar cells. The reflectors render the possibility of controlling the amount of radiation transmitted into the building. The insulated reflectors also reduce the thermal losses through the window. A model for simulation of the electric and hot water production was developed. The model can perform yearly energy simulations where different features such as shading of the cells or effects of the glazing can be included or excluded. The simulation can be run with the reflectors in an active, up right, position or in a passive, horizontal, position. The simulation program was calibrated against measurements on a prototype solar window placed in Lund in the south of Sweden and against a solar window built into a single family house, Solgaarden, in Aelvkarleoe in the central part of Sweden. The results from the simulation shows that the solar window annually produces about 35% more electric energy per unit cell area compared to a vertical flat PV module. (author)

Davidsson, Henrik; Perers, Bengt; Karlsson, Bjoern [Energy and Building Design, Lund University, P.O. Box 118, SE 221 00 Lund (Sweden)

2010-03-15T23:59:59.000Z

159

Matlab for PhD students Basics 1 WS 2010/11 Matlab windows  

E-Print Network [OSTI]

Matlab for PhD students ­ Basics 1 ­ WS 2010/11 Matlab windows The matlab desktop can be edited and brought back with the "Desktop" menu, the windows can be docked and undocked from the main Matlab window -> Default · Command window o Issues commands to Matlab for processing o >> means that Matlab is ready

Kretzberg, Jutta

160

Summary of raman cone penetrometer probe waste tank radiation and chemical environment test  

SciTech Connect (OSTI)

This report summarizes the results of testing Raman sapphire windows that were braze mounted into a mockup Raman probe head and stainless steel coupons in a simulated tank waste environment. The simulated environment was created by exposing sapphire window components, immersed in a tank simulant, in a gamma pit. This work was completed for the U.S. Department of Energy (DOE) Office of Environmental Management (EM-50) for Technical Task Proposal RL4-6-WT-21.

Reich, F.R.

1996-09-27T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Peace Corps / Environment Environment Volunteers  

E-Print Network [OSTI]

Peace Corps / Environment Environment Volunteers Environmental damage can have enormous choices about how to best protect and preserve the local environment. Programs and Sample Projects and communications technology, agriculture, and environment. We are looking for applicants with a variety of skills

Kaminsky, Werner

162

Assessment of Environmentally Friendly Refrigerants for Window Air Conditioners  

SciTech Connect (OSTI)

This paper presents technical assessment of environmentally friendly refrigerants for window air conditioners that currently use refrigerant R410A for residential and commercial applications. The alternative refrigerants that are studied for its replacement include R32, R600a, R290, R1234yf, R1234ze and a mixture of R32 (90% molar concentration) and R125 (10% molar concentration). Baseline experiments were performed on a window unit charged with R410A. The ORNL Heat Pump Design Model was calibrated with the baseline data and was used to assess the comparative performance of the WAC with alternative refrigerants. The paper discusses the advantages and disadvantages of each refrigerants and their suitability for window air conditioners.

Bansal, Pradeep [ORNL] [ORNL; Shen, Bo [ORNL] [ORNL

2014-01-01T23:59:59.000Z

163

Method of making an integral window hermetic fiber optic component  

DOE Patents [OSTI]

In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam.

Dalton, Rick D. (Miamisburg, OH); Kramer, Daniel P. (Centerville, OH); Massey, Richard T. (Hamilton, OH); Waker, Damon A. (Bellbrook, OH)

1996-11-12T23:59:59.000Z

164

Method of making an integral window hermetic fiber optic component  

DOE Patents [OSTI]

In the fabrication of igniters, actuators, detonators, and other pyrotechnic devices to be activated by a laser beam, an integral optical glass window is formed by placing a preform in the structural member of the device and then melting the glass and sealing it in place by heating at a temperature between the ceramming temperature of the glass and the melting point of the metal, followed by rapid furnace cooling to avoid devitrification. No other sealing material is needed to achieve hermeticity. A preferred embodiment of this type of device is fabricated by allowing the molten glass to flow further and form a plano-convex lens integral with and at the bottom of the window. The lens functions to decrease the beam divergence caused by refraction of the laser light passing through the window when the device is fired by means of a laser beam. 9 figs.

Dalton, R.D.; Kramer, D.P.; Massey, R.T.; Waker, D.A.

1996-11-12T23:59:59.000Z

165

WATERSHED EDUCATION PROGRAM The Watershed Education Program (WEP)  

E-Print Network [OSTI]

of watershed hydrology Lake and river systems Urban and rural runoff Best management practices Aquatic leaders, citizens, and natural resource professionals with knowledge and tools to make informed water and land use decisions to protect and restore the integrity of Minnesota's lakes, rivers, streams

Netoff, Theoden

166

Application issues for large-area electrochromic windows incommercial buildings  

SciTech Connect (OSTI)

Projections of performance from small-area devices to large-area windows and enterprise marketing have created high expectations for electrochromic glazings. As a result, this paper seeks to precipitate an objective dialog between material scientists and building-application scientists to determine whether actual large-area electrochromic devices will result in significant performance benefits and what material improvements are needed, if any, to make electrochromics more practical for commercial building applications. Few in-situ tests have been conducted with large-area electrochromic windows applied in buildings. This study presents monitored results from a full-scale field test of large-area electrochromic windows to illustrate how this technology will perform in commercial buildings. The visible transmittance (Tv) of the installed electrochromic ranged from 0.11 to 0.38. The data are limited to the winter period for a south-east-facing window. The effect of actual device performance on lighting energy use, direct sun control, discomfort glare, and interior illumination is discussed. No mechanical system loads were monitored. These data demonstrate the use of electrochromics in a moderate climate and focus on the most restrictive visual task: computer use in offices. Through this small demonstration, we were able to determine that electrochromic windows can indeed provide unmitigated transparent views and a level of dynamic illumination control never before seen in architectural glazing materials. Daily lighting energy use was 6-24 percent less compared to the 11 percent-glazing, with improved interior brightness levels. Daily lighting energy use was 3 percent less to 13 percent more compared to the 38 percent-glazing, with improved window brightness control. The electrochromic window may not be able to fulfill both energy-efficiency and visual comfort objectives when low winter direct sun is present, particularly for computer tasks using cathode-ray tube (CRT) displays. However, window and architectural design as well as electrochromic control options are suggested as methods to broaden the applicability of electrochromics for commercial buildings. Without further modification, its applicability is expected to be limited during cold winter periods due to its slow switching speed.

Lee, Eleanor S.; DiBartolomeo, D.L.

2000-05-01T23:59:59.000Z

167

Optimized ECR plasma apparatus with varied microwave window thickness  

DOE Patents [OSTI]

The present invention describes a technique to control the radial profile of microwave power in an ECR plasma discharge. In order to provide for a uniform plasma density to a specimen, uniform energy absorption by the plasma is desired. By controlling the radial profile of the microwave power transmitted through the microwave window of a reactor, the profile of the transmitted energy to the plasma can be controlled in order to have uniform energy absorption by the plasma. An advantage of controlling the profile using the window transmission characteristics is that variations to the radial profile of microwave power can be made without changing the microwave coupler or reactor design. 9 figs.

Berry, L.A.

1995-11-14T23:59:59.000Z

168

A High Performance Computing Platform for Performing High-Volume Studies With Windows-based Power Grid Tools  

SciTech Connect (OSTI)

Serial Windows-based programs are widely used in power utilities. For applications that require high volume simulations, the single CPU runtime can be on the order of days or weeks. The lengthy runtime, along with the availability of low cost hardware, is leading utilities to seriously consider High Performance Computing (HPC) techniques. However, the vast majority of the HPC computers are still Linux-based and many HPC applications have been custom developed external to the core simulation engine without consideration for ease of use. This has created a technical gap for applying HPC-based tools to todays power grid studies. To fill this gap and accelerate the acceptance and adoption of HPC for power grid applications, this paper presents a prototype of generic HPC platform for running Windows-based power grid programs on Linux-based HPC environment. The preliminary results show that the runtime can be reduced from weeks to hours to improve work efficiency.

Chen, Yousu; Huang, Zhenyu

2014-08-31T23:59:59.000Z

169

Covered Product Category: Residential Windows, Doors, and Skylights  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance across a variety of product categories, including residential windows, doors, and skylights, which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

170

Laboratory Performance Testing of Residential Window Air Conditioners  

SciTech Connect (OSTI)

Window air conditioners are the dominant cooling product for residences, in terms of annual unit sales. They are inexpensive, portable and can be installed by the owner. For this reason, they are an attractive solution for supplemental cooling, for retrofitting air conditioning into a home which lacks ductwork, and for renters. Window air conditioners for sale in the United States are required to meet very modest minimum efficiency standards. Four window air conditioners' performance were tested in the Advanced HVAC Systems Laboratory on NREL's campus in Golden, CO. In order to separate and study the refrigerant system's performance, the unit's internal leakage pathways, the unit's fanforced ventilation, and the leakage around the unit resulting from installation in a window, a series of tests were devised that focused on each aspect of the unit's performance. These tests were designed to develop a detailed performance map to determine whole-house performance in different climates. Even though the test regimen deviated thoroughly from the industry-standard ratings test, the results permit simple calculation of an estimated rating for both capacity and efficiency that would result from a standard ratings test. Using this calculation method, it was found that the three new air conditioners' measured performance was consistent with their ratings. This method also permits calculation of equivalent SEER for the test articles. Performance datasets were developed across a broad range of indoor and outdoor operating conditions, and used them to generate performance maps.

Winkler, J.; Booten, C.; Christensen, D.; Tomerlin, J.

2013-03-01T23:59:59.000Z

171

Energy Gaining Windows for Residential Buildings Jesper Kragh, Assistant Professor,  

E-Print Network [OSTI]

season. It is assumed that in northern cold climates all of the solar gain during the heating season can profiles, solar gain, net energy gain, low energy houses SUMMARY: This paper presents some of the research buildings. The net energy gain of windows is the solar gain minus the heat loss integrated over the heating

172

Intermittent and sustained periodic windows in networked chaotic Rssler oscillators  

SciTech Connect (OSTI)

Route to chaos (or periodicity) in dynamical systems is one of fundamental problems. Here, dynamical behaviors of coupled chaotic Rssler oscillators on complex networks are investigated and two different types of periodic windows with the variation of coupling strength are found. Under a moderate coupling, the periodic window is intermittent, and the attractors within the window extremely sensitively depend on the initial conditions, coupling parameter, and topology of the network. Therefore, after adding or removing one edge of network, the periodic attractor can be destroyed and substituted by a chaotic one, or vice versa. In contrast, under an extremely weak coupling, another type of periodic window appears, which insensitively depends on the initial conditions, coupling parameter, and network. It is sustained and unchanged for different types of network structure. It is also found that the phase differences of the oscillators are almost discrete and randomly distributed except that directly linked oscillators more likely have different phases. These dynamical behaviors have also been generally observed in other networked chaotic oscillators.

He, Zhiwei; Sun, Yong [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China) [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China); University of the Chinese Academy of Sciences, Beijing 100049 (China); Zhan, Meng, E-mail: zhanmeng@wipm.ac.cn [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China)] [Wuhan Center for Magnetic Resonance, State Key Laboratory of Magnetic Resonance and Atomic and Molecular Physics, Wuhan Institute of Physics and Mathematics, Chinese Academy of Sciences, Wuhan 430071 (China)

2013-12-15T23:59:59.000Z

173

Dell recommends Windows 7. Students get the best price  

E-Print Network [OSTI]

Dell recommends Windows® 7. Students get the best price on consumer PCs from Dell* If you find a better price on your day of purchase, contact a Dell University specialist and we will beat that price come in small packages. DellTM XPSTM 14z Dell University Price$ 99999 ® 7 Home Premium VV Get

Almor, Amit

174

Windows on Computer Science Department of Computer and Information Science  

E-Print Network [OSTI]

1 CSCI 120 Windows on Computer Science Department of Computer and Information Science IUPUI What is Computer Science? Is Computer Science the study of computers (Building computers, and writing computer programs) ? Computer Science is no more about computers than astronomy is about telescopes, or biology

Fang, Shiaofen

175

The In uence of Windowing on Time Delay Estimates  

E-Print Network [OSTI]

'Ruanaidh Siemens Corporate Research 755 College Road East Princeton , NJ 08540 rvbalan,rosca,rickard,oruanaidh@scr.siemens of frequencies. Such a relation holds true when the Fourier transform is used to go into the frequency domain. However, in practice, one has to use the windowed Fourier transform to obtain the frequency domain

Maryland at College Park, University of

176

The Influence of Windowing on Time Delay Estimates  

E-Print Network [OSTI]

O'Ruanaidh Siemens Corporate Research 755 College Road East Princeton , NJ 08540 rvbalan,rosca,rickard,oruanaidh@scr.siemens of frequencies. Such a relation holds true when the Fourier transform is used to go into the frequency domain. However, in practice, one has to use the windowed Fourier transform to obtain the frequency domain

Balan, Radu V.

177

Instruction-Window Power Reduction Using Data Dependence Metric  

E-Print Network [OSTI]

power savings, and with an average performance loss of a very modest 1.9%. I. INTRODUCTION NewInstruction-Window Power Reduction Using Data Dependence Metric Ziad Youssfi and Michael Shanblatt Department of Electrical and Computer Engineering Michigan State University East Lansing, MI 48824 ziad

Lee, Hsien-Hsin "Sean"

178

OPERATING TEMPERATURE WINDOWS FOR FUSION REACTOR STRUCTURAL MATERIALS  

E-Print Network [OSTI]

OPERATING TEMPERATURE WINDOWS FOR FUSION REACTOR STRUCTURAL MATERIALS S.J. Zinkle1 and N.M. Ghoniem reactor structural materials: four reduced-activation structural materials (oxide-dispersion- strengthened operating temperature limit of structural materials is determined by one of four factors, all of which

California at Los Angeles, University of

179

DO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok  

E-Print Network [OSTI]

/ bottles Metal items other than cans/foil Napkins Paper towels Plastic bags Plastic films Plastic utensilsDO NOT INCLUDE: flatten cardboard staples, tape & envelope windows ok Aerosol cans Books Bottle, PDAs, inkjet cartridges, CFL bulbs (cushioned, sealed in plastic) computers, printers, printer

Wolfe, Patrick J.

180

EMC PERSPECTIVE: THE POWER OF WINDOWS SERVER 2012 AND EMC  

E-Print Network [OSTI]

EMC PERSPECTIVE: THE POWER OF WINDOWS SERVER 2012 AND EMC INFRASTRUCTURE FOR MICROSOFT PRIVATE and storage optimization features of intelligent storage arrays, such as the EMC® Symmetrix® VMAX® storage family, the EMC® VNX® series, and the EMC® Isilon® scale-out NAS family. With new technologies

Chaudhuri, Surajit

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Thermal and Structural Analysis of Targets and Windows  

E-Print Network [OSTI]

Thermal and Structural Analysis of Targets and Windows Materials, Irradiation Data and Fracture) = EDD/Cp Applied Thermal Stress Pa CTE*E*DeltaT Thermal Resistance Rts=UTS/(CTE*E *DeltaT) Thermal Shock 1147 1.16E+09 0.984 7445 Candidate Materials - Young's Modulus, UTS, Delta T, Thermal Stress

McDonald, Kirk

182

T-547: Microsoft Windows Human Interface Device (HID) Vulnerability  

Broader source: Energy.gov [DOE]

Microsoft Windows does not properly warn the user before enabling additional Human Interface Device (HID) functionality over USB, which allows user-assisted attackers to execute arbitrary programs via crafted USB data, as demonstrated by keyboard and mouse data sent by malware on a Smartphone that the user connected to the computer.

183

Internet Explorer 7 on Windows Vista: Obtaining MIT Certificates  

E-Print Network [OSTI]

: A separate certificate password is not necessary for IE7 on Vista; the certificate is protected by your web services at MIT with IE7 on Windows Vista, three types of MIT web certificates are needed: · MIT servers · MIT Client Certificate, needed in IE7 on Vista to generate the personal certificate · MIT

Barton, Paul I.

184

Metals concentration in salt marshes plants and kelp around San Diego: A window to environment quality  

E-Print Network [OSTI]

in salt marshes plants and kelp around San Diego: A windowassessing levels of metals in kelp and salt marsh plants inmetals levels found in kelp and salt marsh plants reflect

Deheyn, Dimitri

2009-01-01T23:59:59.000Z

185

ENERGY EFFICIENT WINDOWS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979  

E-Print Network [OSTI]

LBL-9371, DESIGN CALCULATIONS FOR PASSIVE SOLAR BUILDINGS~YNAMIC RESPONSE OF PASSIVE SOLAR~ BUILDIN~TO DESIGN WEATHER

Berman, S.

2013-01-01T23:59:59.000Z

186

Using the NeWS window system in a Cray environment  

SciTech Connect (OSTI)

NeWS is structured as a single UNIX process, a network server that contains a PostScript interpreter. Client programs, which exist somewhere out on the network, talk to NeWS through byte streams. This paper describes the implementation of such a client interface on a Cray running the UNICOS operating system. With only a modest effort, it is possible to fit a simple PostScript interface to existing mainframe applications, which allows the user to graphically interact with the program from a remote workstation. Some typical applications, which have been structured as NeWS clients, have been described.

Phillips, R.L.; Forslund, D.W.

1987-06-01T23:59:59.000Z

187

ENERGY EFFICIENT WINDOWS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979  

E-Print Network [OSTI]

heat-transfer rate approximating that of an insulated \\valL Proto- types of such devices with a thermal resistance of R5 in an open

Berman, S.

2013-01-01T23:59:59.000Z

188

Flight Measurements of the Aero-Optical Environment Around a Flat-Windowed Turret  

E-Print Network [OSTI]

be acquired; this provided statistical data over a large range of viewing angles between looking- forward directed-energy system's field of regard. To verify wind-tunnel experiments [5] and computational-front sensor providing an extensive aero-optical mapping. The primary data were acquired at Mach 0

Gordeyev, Stanislav

189

Experimental evaluation of 350 MHz RF accelerator windows for the low energy demonstration accelerator  

SciTech Connect (OSTI)

Radio frequency (RF) windows are historically a point where failure occurs in input power couplers for accelerators. To obtain a reliable, high-power, 350 MHz RF window for the Low Energy Demonstration Accelerator (LEDA) project of the Accelerator Production of Tritium program, RF windows prototypes from different vendors were tested. Experiments were performed to evaluate the RF windows by the vendors to select a window for the LEDA project. The Communications and Power, Inc. (CPI) windows were conditioned to 445 kW in roughly 15 hours. At 445 kW a window failed, and the cause of the failure will be presented. The English Electronic Valve, Inc. (EEV) windows were conditioned to 944 kW in 26 hours and then tested at 944 kW for 4 hours with no indication of problems.

Cummings, K.; Rees, D.; Roybal, W. [and others

1997-09-01T23:59:59.000Z

190

Design of an energy efficient and economical actuator for automobile windows  

E-Print Network [OSTI]

This thesis describes the design and analysis of an efficient, yet low cost, drum driven window actuation system for an automotive power window. The design uses a novel approach that involves using cables to both actuate ...

Durand, Keith (Keith V.)

2007-01-01T23:59:59.000Z

191

Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits  

Broader source: Energy.gov [DOE]

This Building America webinar presented a new and improved low-e storm window that boasts a combination of curb appeal and energy efficiency, all for a fraction of the cost of window replacement, on Sept. 9, 2014.

192

Key Elements of and Materials Performance Targets for Highly Insulating Window Frames  

E-Print Network [OSTI]

in light green. 2.5 Window Frame E (PVC) Window frame Eis polyvinyl chloride (PVC). We performed calculations forspacer = 0.25?0.1 W/(mK) ? pvc = 0.9 W/(mK), ? eff. ,spacer

Gustavsen, Arild

2012-01-01T23:59:59.000Z

193

How Do You Use Daylighting While Reducing Excess Heat from Windows...  

Broader source: Energy.gov (indexed) [DOE]

through these windows in the summer. How do you use daylighting while reducing excess heat from windows? Each Thursday, you have the chance to share your thoughts on a question...

194

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

Building Heating Loads (Trillion BTU/yr) Total BuildingCooling Loads (Trillion BTU/yr) Non. Wind Infilt SHGC Wind.Energy Consumption (Trillion BTU/yr) Area, Window Window

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

195

sustainable environment  

E-Print Network [OSTI]

sustainable resource management environment fisheries aquaculture Cefas capability statement #12 that they can manage their environments and resources in a responsible, effective and sustainable manner. Our costs · Understand, assess and develop opportunities in the short, medium and long-term · Build

196

Installation of Window Air Conditioners Page 1 of 2 Virginia Polytechnic Institute and State University No. 5705 Rev.: 3  

E-Print Network [OSTI]

Installation of Window Air Conditioners Page 1 of 2 Virginia Polytechnic Institute and State __________________________________________________________________________________ Subject: Installation of Window Air Conditioners........................................................................................................................................1 1. Purpose To define a policy for installation of window air conditioners that avoids exterior

Buehrer, R. Michael

197

Completed April 30, 2004. LBNL-54966. The Energy-Savings Potential of Electrochromic Windows  

E-Print Network [OSTI]

% market penetration level in that year. Keywords: Building energy-efficiency, electrochromic windows1 Completed April 30, 2004. LBNL-54966. The Energy-Savings Potential of Electrochromic Windows Road, Berkeley, CA 94720, USA Abstract Switchable electrochromic (EC) windows have been projected

198

Lighting energy savings potential of split-pane electrochromic windows controlled for  

E-Print Network [OSTI]

LBNL-6152E Lighting energy savings potential of split- pane electrochromic windows controlled potential of split-pane electrochromic windows controlled for daylighting with visual comfort L was conducted to evaluate lighting energy savings of split-pane electrochromic (EC) windows controlled

199

Industrial Risks and Land use Planning Study of blast window resistance  

E-Print Network [OSTI]

glasses with or without anti-explosion film, laminated glasses...), mobile frames or window locking a short time (inferior to 10 ms). Coevert and al. [5] also studied security window film and insulating/16/4 with Insulating glass fabricated with laminated glass (a) Figure 4: (a) security window film, (c) · The behaviour

Boyer, Edmond

200

The ultra-thin solar cells that could generate power through windows  

E-Print Network [OSTI]

The ultra-thin solar cells that could generate power through windows By Claire Bates Last updated, generating enough electricity to power the GPS or air conditioning. Solar cells, which convert solar energy into tinted windows Page 1 of 3The ultra-thin solar cells that could generate power through windows | Mail

Rogers, John A.

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

A First-Generation Prototype Dynamic Residential Window Christian Kohler, Howdy Goudey, and Dariush Arasteh  

E-Print Network [OSTI]

October 26, 2004 Abstract We present the concept for a "smart" highly efficient dynamic window in residential buildings. We describe a prototype dynamic window that relies on an internal shade, which deploys technology have significantly reduced window-related energy use and peak demand in residential buildings

202

Analysis of a Fabric/Desiccant Window Cavity Dehumidifier  

E-Print Network [OSTI]

design of such a system was developed and modeled to determine its performance under typical load and weather conditions. The design includes a moving fabric/desiccant belt installed in a window cavity, cwpled with a regenerative heat exchanger, which... energy, but could be supplied by an auxiliary source. A regenerative heat exchanger exmts heat from the hot exhaust of the dehumidification channel and preheats the incoming regeneration air slream. This system can be conf~gured to process two...

Hunn, B. D.; Grasso, M. M.; Vadlamani, V.

1994-01-01T23:59:59.000Z

203

Development of a cooled microwave window. CRADA final report for CRADA Number Y-1293-0200  

SciTech Connect (OSTI)

The objective of this Cooperative Research and Development project (CRADA) was to generate a new design for a microwave vacuum window to be used with ASTeX Corporation plasma processing equipment. This vacuum window allows transmission of microwave power from an input waveguide into a vacuum chamber for creation of plasma using the electron cyclotron resonance process. Requirements for the window design are: higher power capability, improved resistance to chemical attack, and physical compatibility with previous window models. In these applications, a significant portion of the input power is deposited in the window by plasma bombardment so the window must remove a great deal of heat to remain at a reliable operating temperature. A power level increase from 1.5 kW to 5 kW is desired by ASTeX for the new window which must have {approximately} 120 mm diameter and be compatible with existing hardware. New applications for these processing systems are being developed by ASTeX; these require the use of highly reactive fluorine plasmas which can rapidly etch some window materials. Therefore, the use of a fluorine compatible window ceramic is required. Two new window designs were investigated using advanced window-modeling techniques and low-power laboratory testing. It was determined that both concepts were capable of operating at significantly higher power levels than present commercial windows and would meet the CRADA design objectives. The compatibility of the window materials considered with fluorine plasmas are believed to be acceptable. ASTeX has a continuing interest in pursuing these window designs and will likely begin manufacturing design work of the improved design in the near future. There will also be a continuing effort to keep AlN ceramic manufacturers interested in improving the quality of large AlN disks. Additional window tests and development work could be performed by ORNL/MMES if a suitable funding source is available.

Bell, G.L.; Bigelow, T.S.; Leitch, R.M.; Berry, L.A. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Holber, W.M. [Applied Science and Technology, Inc., Woburn, MA (United States)

1995-04-06T23:59:59.000Z

204

Building America's Low-e Storm Window Adoption Program Plan (FY2014)  

SciTech Connect (OSTI)

Low emissivity (low-e) storm windows/panels appear to hold promise for effectively reducing existing home heating, ventilation, and air-conditioning (HVAC) consumption. Due to the affordability of low-e storm windows and the large numbers of existing homes that have low-performing single-pane or double-pane clear windows, a tremendous opportunity exists to provide energy savings by transforming the low-e storm window market and increasing market adoption. This report outlines U.S. Department of Energy (DOE) Building Americas planned market transformation activities in support of low-e storm window adoption during fiscal year (FY) 2014.

Cort, Katherine A.

2013-12-23T23:59:59.000Z

205

Movable insulation. A guide to reducing heating and cooling losses through the windows in your home  

SciTech Connect (OSTI)

A typical house loses 25 to 30% of its heat through windows, and a house with large windows may lose as much as 50%. Numerous movable-insulation systems that will cut the heat loss through windows in half are described. Chapters are: The Energy-Responsive Dwelling, Past to Present; Window Heat Losses and Gains; Enhanced Glazing Systems; Choosing a Window-Insulation Design for Your Home; Pop-In Shutters; Thermal Curtains - Blankets that Fold; Thermal Shades - Blankets that Roll; Thermal Shutters and Folding Screens; Insulation Between Glazing and Interior Louvers; Exterior Hinged and Sliding Shutters; Sun-Shading Screens; Exterior Roll Shutters; Shutters for Skylights; Shutters for Clerestory Windows; Interior Greenhouse Insulation Systems; Exterior Insulation for Greenhouses; Movable Insulation to Assist Passive Space Heating; and Movable Insulation to Assist Solar Water Heaters. Appendices include the following: insulated shade and shutter construction; the economics of window insulation; movable insulation products, hardware, and components; further technical information; and design sources. (MCW)

Langdon, W.K.

1980-01-01T23:59:59.000Z

206

Implementations of the Integrated Linux, Windows and Macintosh Cluster for achieving the Personal High Performance Computing  

E-Print Network [OSTI]

SUMMARY The motivation and objective for this paper is to demonstrate (1) the integrated Linux (30 distributions, including Red Hat and SUSE), Windows (Cluster 2003 and Server 2003) and Macintosh (Tiger 10.4) cluster for running Web Services and jobs; and (2) the demonstration of the Personal High Performance Computing (PHPC), which only require a smaller number of computers, resources and space in the secure Gigabytes of 1,000 Mps and Wi-Fi/3G of 108 Mbps networking environments. This PHPC is based on a cluster of the 32-bit and 64-bit AMD and Intel dualcore machines, which can achieve the following: (a) jobs are shared amongst different platforms, which can run as a single job altogether or run different jobs concurrently; (b) running Java and.NET Web Services; (c) receiving up to a 60 % better performance referring to multi-tasking performance; (e) ensuring a secure networking environment, which includes VPN, in-build firewall and integrated wired and wireless networks; (f) storing a massive amount of data (12 TB, or 12,000 GB) for database and server applications; and (g) successfully integrating with other technologies such as the integrated Java and.NET Web Services,

Victor Chang

207

Theoretical Predictions and Experimental Assessments of the Performance of Alumina RF Windows  

SciTech Connect (OSTI)

Radio frequency (RF) windows are the most likely place for catastrophic failure to occur in input power couplers for particle accelerators. Reliable RF windows are essential for the success of the Accelerator Production of Tritium (APT) program because there are over 1000 windows on the accelerator, and it takes more than one day to recover from a window failure. The goals of this research are to analytically predict the lifetime of the windows, to develop a conditioning procedure, and to evaluate the performance of the RF windows. The analytical goal is to predict the lifetime of the windows. The probability of failure is predicted by the combination of a finite element model of the window, Weibull probabilistic analysis, and fracture mechanics. The window assembly is modeled in a finite element electromagnetic code in order to calculate the electric fields in the window. The geometry (i.e. mesh) and electric fields are input into a translator program to generate the mesh and boundary conditions for a finite element thermal structural code. The temperatures and stresses are determined in the thermal/structural code. The geometry and thermal structural results are input into another translator program to generate an input file for the reliability code. Material, geometry and service data are also input into the reliability code. To obtain accurate Weibull and fatigue data for the analytical model, four point bend tests were done. The analytical model is validated by comparing the measurements to the calculations. The lifetime of the windows is then determined using the reliability code. The analytical model shows the window has a good thermal mechanical design and that fast fracture is unlikely to occur below a power level of 9 Mw. The experimental goal is to develop a conditioning procedure and evaluate the performance of RF windows. During the experimental evaluation, much was learned about processing of the windows to improve the RF performance. Methods of processing included grit blasting and using various coatings.

Karen Ann Cummings

1998-07-01T23:59:59.000Z

208

Feasibility study of broadband efficient ''water window'' source  

SciTech Connect (OSTI)

We demonstrate a table-top broadband emission water window source based on laser-produced high-Z plasmas. Resonance emission from multiply charged ions merges to produce intense unresolved transition arrays (UTAs) in the 2-4 nm region, extending below the carbon K edge (4.37 nm). Arrays resulting from n=4-n=4 transitions are overlaid with n=4-n=5 emission and shift to shorter wavelength with increasing atomic number. An outline of a microscope design for single-shot live cell imaging is proposed based on a bismuth plasma UTA source, coupled to multilayer mirror optics.

Higashiguchi, Takeshi; Yugami, Noboru [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Japan Science and Technology Agency, CREST, 4-1-8 Honcho, Kanagawa, Saitama 332-0012 (Japan); Otsuka, Takamitsu [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Jiang Weihua [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 (Japan); Endo, Akira [Research Institute for Science and Engineering, Waseda University, Okubo 3-4-1, Shinjuku, Tokyo 169-8555 (Japan); Li Bowen; Dunne, Padraig; O'Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland)

2012-01-02T23:59:59.000Z

209

Expert Meeting Report: Windows Options for New and Existing Homes  

SciTech Connect (OSTI)

The NorthernSTAR Building America Partnership held an Expert Meeting on Windows Options for New and Existing Homes on November 14, 2011 at the Nolte Building on the campus of the University of Minnesota in Minneapolis, MN. Featured speakers included John Carmody and Pat Huelman of the University of Minnesota, Charlie Curcija of Lawrence Berkeley National Laboratory, Jim Larson of Cardinal Glass Industries, Peter Yost of Building Green, Peter Baker of Building Science Corporation, and Theresa Weston of Du Pont Innovations. Audience participation was actively encouraged during each presentation to uncover need and promote dialog among researchers and industry professionals.

Ojczyk, C.; Carmody, J.; Haglund, K.

2013-05-01T23:59:59.000Z

210

Mickey Leland Energy Fellowship Report: Development of Advanced Window Coatings  

SciTech Connect (OSTI)

Advanced fenestration technologies for light and thermal management in building applications are of great recent research interest for improvements in energy efficiency. Of these technologies, there is specific interest in advanced window coating technologies that have tailored control over the visible and infrared (IR) scattering into a room for both static and dynamic applications. Recently, PNNL has investigated novel subwavelength nanostructured coatings for both daylighting, and IR thermal management applications. Such coatings rese still in the early stages and additional research is needed in terms of scalable manufacturing. This project investigates aspects of a potential new methodology for low-cost scalable manufacture of said subwavelength coatings.

Bolton, Ladena A.; Alvine, Kyle J.; Schemer-Kohrn, Alan L.

2014-08-05T23:59:59.000Z

211

Atmospheric Condensation Potential of Windows in Hot, Humid Climates  

E-Print Network [OSTI]

. REFERENCES I. Wilson, A.G., 1973, " Condensation on Inside Window Surfaces," Canadian Building Di~esl, vol. 137, no. 2, pp 4.1-4.4. 2. DUll, G.S., 1979, " Condensation in Allics: Are Vapour Ilarriers Really the_answer? ,", Energy and Iluildings, vol. I... and Buildinl; Materials. vol. 3, no. 3, pp 135 -139 . 9. EI Diasty, R., Budaiwi, I., 1989, " Prediction of Mass Condensation Rate for Gas-Vapour Mixture Dominated by a Non-Condensable Gas," 12th Canadian Congress of ADDlied Mechanics, vol.2, pp 734 ?735...

El Diasty, R.; Budaiwi, I.

212

Energy-Efficient Window Treatments | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005DepartmentDecember 2011District |Department ofEnergy andWindow

213

Expert Meeting Report: Windows Options for New and Existing Homes  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit|Department of Energy56Executive Summit onTransforming Existing Windows

214

Affordable Window Insulation with R-10/inch Rating  

SciTech Connect (OSTI)

During the performance of contract DE-FC26-00-NT40998, entitled ''Affordable Window Insulation with R-10/inch Value'', research was conducted at Aspen Aerogels, Inc. to develop new transparent aerogel materials suitable for window insulation applications. The project requirements were to develop a formulation or multiple formulations that have high transparency (85-90%) in the visible region, are hydrophobic (will not opacify with exposure to water vapor or liquid), and have at least 2% resiliency (interpreted as recoverable 2% strain and better than 5% strain to failure in compression). Results from an unrelated project showed that silica aerogels covalently bonded to organic polymers exhibit excellent mechanical properties. At the outset of this project, we believed that such a route is the best to improve mechanical properties. We have applied Design of Experiment (DOE) techniques to optimize formulations including both silica aerogels and organically modified silica aerogels (''Ormosils''). We used these DOE results to optimize formulations around the local/global optimization points. This report documents that we succeeded in developing a number of formulations that meet all of the stated criteria. We successfully developed formulations utilizing a two-step approach where the first step involves acid catalyzed hydrolysis and the second step involves base catalyzed condensation to make the gels. The gels were dried using supercritical CO{sub 2} and we were able to make 1 foot x 1 foot x 0.5 inch panels that met the criteria established.

Jenifer Marchesi Redouane Begag; Je Kyun Lee; Danny Ou; Jong Ho Sonn; George Gould; Wendell Rhine

2004-10-15T23:59:59.000Z

215

High Performance X-Ray Transmission Windows Based on Graphenic Carbon  

E-Print Network [OSTI]

A novel x-ray transmission window based on graphenic carbon has been developed with superior performance compared to beryllium transmission windows that are currently used in the field. Graphenic carbon in combination with an integrated silicon frame allows for a window design which does not use a mechanical support grid or additional light blocking layers. Compared to beryllium, the novel x-ray transmission window exhibits an improved transmission in the low energy region ($0.1 hbox{keV}-3 hbox{keV}$ ) while demonstrating excellent mechanical stability, as well as light and vacuum tightness. Therefore, the newly established graphenic carbon window, can replace beryllium in x-ray transmission windows with a nontoxic and abundant material. Index terms: Beryllium, Carbon, Graphene, Thin films, X-ray applications, X-ray detectors

Huebner, Sebastian; Kapser, Stefan; Pahlke, Andreas; Kreupl, Franz

2015-01-01T23:59:59.000Z

216

Window-Related Energy Consumption in the US Residential andCommercial Building Stock  

SciTech Connect (OSTI)

We present a simple spreadsheet-based tool for estimating window-related energy consumption in the United States. Using available data on the properties of the installed US window stock, we estimate that windows are responsible for 2.15 quadrillion Btu (Quads) of heating energy consumption and 1.48 Quads of cooling energy consumption annually. We develop estimates of average U-factor and SHGC for current window sales. We estimate that a complete replacement of the installed window stock with these products would result in energy savings of approximately 1.2 quads. We demonstrate that future window technologies offer energy savings potentials of up to 3.9 Quads.

Apte, Joshua; Arasteh, Dariush

2006-06-16T23:59:59.000Z

217

Purged window apparatus. [On-line spectroscopic analysis of gas flow systems  

DOE Patents [OSTI]

A purged window apparatus is described which utilizes tangentially injected heated purge gases in the vicinity of electromagnetic radiation transmitting windows and a tapered external mounting tube to accelerate these gases to provide a vortex flow on the window surface and a turbulent flow throughout the mounting tube thereby preventing backstreaming of flowing gases under investigation in a chamber to which a plurality of similar purged apparatus is attached with the consequent result that spectroscopic analyses can be undertaken for lengthy periods without the necessity of interrupting the flow for cleaning or replacing the windows due to contamination.

Ballard, E.O.

1982-04-05T23:59:59.000Z

218

Application issues for large-area electrochromic windows in commercial buildings  

E-Print Network [OSTI]

Handbook of inorganic electrochromic materials. 1995.R. Sullivan. A Review of Electrochromic Window Performancetime of large-scale electrochromic devices. In Large-Area

Lee, Eleanor S.; DiBartolomeo, D.L.

2000-01-01T23:59:59.000Z

219

T-573: Windows Remote Desktop Client DLL Loading Error Lets Remote Users Execute Arbitrary Code  

Broader source: Energy.gov [DOE]

A vulnerability was reported in Windows Remote Desktop Client. A remote user can cause arbitrary code to be executed on the target user's system.

220

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

2001). "Residential Energy Consumption Survey." 2006, fromCommercial Building Energy Consumption Survey." from http://Scale window-related energy consumption to account for new

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Smarter Smart Windows | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Smarter Smart Windows Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory...

222

E-Print Network 3.0 - affordable window insulation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the UK Forestry Commission Collection: Renewable Energy 5 Renovating Residential HVAC Systems HVAC Systems Summary: windows. Add ceilingwallfloor insulation. 2 Ducts moved...

223

Key Elements of and Materials Performance Targets for Highly Insulating Window Frames  

SciTech Connect (OSTI)

The thermal performance of windows is important for energy efficient buildings. Windows typically account for about 30-50 percent of the transmission losses though the building envelope, even if their area fraction of the envelope is far less. The reason for this can be found by comparing the thermal transmittance (U-factor) of windows to the U-factor of their opaque counterparts (wall, roof and floor constructions). In well insulated buildings the U-factor of walls, roofs an floors can be between 0.1-0.2 W/(m2K). The best windows have U-values of about 0.7-1.0. It is therefore obvious that the U-factor of windows needs to be reduced, even though looking at the whole energy balance for windows (i.e. solar gains minus transmission losses) makes the picture more complex.In high performance windows the frame design and material use is of utmost importance, as the frame performance is usually the limiting factor for reducing the total window U-factor further. This paper describes simulation studies analyzing the effects on frame and edge-of-glass U-factors of different surface emissivities as well as frame material and spacer conductivities. The goal of this work is to define materials research targets for window frame components that will result in better frame thermal performance than is exhibited by the best products available on the market today.

Gustavsen, Arild; Grynning, Steinar; Arasteh, Dariush; Jelle, Bjorn Petter; Goudey, Howdy

2011-03-28T23:59:59.000Z

224

U-225: Citrix Access Gateway Plug-in for Windows nsepacom ActiveX...  

Broader source: Energy.gov (indexed) [DOE]

in Citrix Access Gateway Plug-in for Windows can be exploited by malicious people to compromise a user's system. reference LINKS: Citrix Knowledge Center Secunia...

225

Building Scientific Workflows for Earth System Modelling with Windows Workflow Foundation  

E-Print Network [OSTI]

Building Scientific Workflows for Earth System Modelling with Windows Workflow Foundation Matthew J developed a framework for the composition, execution and management of integrated Earth system models

226

Apparatus for preventing particle deposition from process streams on optical access windows  

DOE Patents [OSTI]

An electrostatic precipitator is disposed inside and around the periphery of the window of a viewing port communicating with a housing through which a particle-laden gas stream is being passed. The precipitator includes a pair of electrodes around the periphery of the window, spaced apart and connected to a unidirectional voltage source. Application of high voltage from the source to the electrodes causes air molecules in the gas stream to become ionized, attaching to solid particles and causing them to be deposited on a collector electrode. This prevents the particles from being deposited on the window and keeps the window clean for viewing and making optical measurements.

Logan, Ronald G. (Fredericksburg, VA); Grimm, Ulrich (Morgantown, WV)

1993-01-01T23:59:59.000Z

227

U< I 7 jjORNLCON-3S) EXPERIMENTAL ANALYSIS OF A WINDOW  

E-Print Network [OSTI]

UAIR CONDITIONER OAK RIDGE WITH NATIONAL R-22. #12;ORNUCON-389 EXPERIMENTAL ANALYSIS OF A WINDOW AIR CONDITIONER WITH R-22 AND ZEOTROPIC MIXTURE OF R

Oak Ridge National Laboratory

228

Water Window Ptychographic Imaging with Characterized Coherent X-rays  

E-Print Network [OSTI]

We report on a ptychographical coherent diffractive imaging experiment in the water window with focused soft X-rays at $500~\\mathrm{eV}$. An X-ray beam with high degree of coherence was selected for ptychography at the P04 beamline of the PETRA III synchrotron radiation source. We measured the beam coherence with the newly developed non-redundant array method. A pinhole $2.6~\\mathrm{\\mu m}$ in size selected the coherent part of the beam and was used for ptychographic measurements of a lithographically manufactured test sample and fossil diatom. The achieved resolution was $53~\\mathrm{nm}$ for the test sample and only limited by the size of the detector. The diatom was imaged at a resolution better than $90~\\mathrm{nm}$.

Rose, Max; Dzhigaev, Dmitry; Gorobtsov, Oleg; Senkbeil, Tobias; von Gundlach, Andreas; Gorniak, Thomas; Shabalin, Anatoly; Viefhaus, Jens; Rosenhahn, Axel; Vartanyants, Ivan

2015-01-01T23:59:59.000Z

229

Vacuum chamber with a supersonic-flow aerodynamic window  

DOE Patents [OSTI]

A supersonic flow aerodynamic window is disclosed whereby a steam ejector situated in a primary chamber at vacuum exhausts superheated steam toward an orifice to a region of higher pressure, creating a barrier to the gas in the region of higher pressure which attempts to enter through the orifice. In a mixing chamber outside and in fluid communication with the primary chamber, superheated steam and gas are combined into a mixture which then enters the primary chamber through the orifice. At the point of impact of the ejector/superheated steam and the incoming gas/superheated steam mixture, a barrier is created to the gas attempting to enter the ejector chamber. This barrier, coupled with suitable vacuum pumping means and cooling means, serves to keep the steam ejector and primary chamber at a negative pressure, even though the primary chamber has an orifice to a region of higher pressure.

Hanson, C.L.

1980-10-14T23:59:59.000Z

230

Vacuum chamber with a supersonic flow aerodynamic window  

DOE Patents [OSTI]

A supersonic flow aerodynamic window, whereby a steam ejector situated in a primary chamber at vacuum exhausts superheated steam toward an orifice to a region of higher pressure, creating a barrier to the gas in the region of higher pressure which attempts to enter through the orifice. In a mixing chamber outside and in fluid communication with the primary chamber, superheated steam and gas are combined into a mixture which then enters the primary chamber through the orifice. At the point of impact of the ejector/superheated steam and the incoming gas/superheated steam mixture, a barrier is created to the gas attempting to enter the ejector chamber. This barrier, coupled with suitable vacuum pumping means and cooling means, serves to keep the steam ejector and primary chamber at a negative pressure, even though the primary chamber has an orifice to a region of higher pressure.

Hanson, Clark L. (Livermore, CA)

1982-01-01T23:59:59.000Z

231

Chromogenic switchable glazing: Towards the development of the smart window  

SciTech Connect (OSTI)

The science and technology of chromogenic materials for switchable glazings in building applications is discussed. These glazings can be used for dynamic control of solar and visible energy. Currently many researchers and engineers are involved with the development of products in this field. A summary of activities in Japan, Europe, Australia, USA and Canada is made. The activities of the International Energy Agency are included. Both non-electrically activated and electrically activated glazings are discussed. Technologies covered in the first category are photochromics, and thermochromics and thermotropics. A discussion of electrically activated chromogenic glazings includes dispersed liquid crystals, dispersed particles and electrochromics. A selection of device structures and performance characteristics are compared. A discussion of transparent conductors is presented. Technical issues concerning large-area development of smart windows are discussed.

Lampert, C.M.

1995-06-01T23:59:59.000Z

232

ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1978  

E-Print Network [OSTI]

Laminators and Coaters. Window Film Manufac- Lam'1natePackage turers Association Window Film Dealers AssociationEff1c1ent Windows Program Polyester Film Suppliers --{1c1

Cairns, E.L.

2011-01-01T23:59:59.000Z

233

Field Evaluation of Highly Insulating Windows in the Lab Homes: Winter Experiment  

SciTech Connect (OSTI)

This field evaluation of highly insulating windows was undertaken in a matched pair of 'Lab Homes' located on the Pacific Northwest National Laboratory (PNNL) campus during the 2012 winter heating season. Improving the insulation and solar heat gain characteristics of a home's windows has the potential to significantly improve the home's building envelope and overall thermal performance by reducing heat loss (in the winter), and cooling loss and solar heat gain (in the summer) through the windows. A high quality installation and/or window retrofit will also minimize or reduce air leakage through the window cavity and thus also contribute to reduced heat loss in the winter and cooling loss in the summer. These improvements all contribute to decreasing overall annual home energy use. Occupant comfort (non-quantifiable) can also be increased by minimizing or eliminating the cold 'draft' (temperature) many residents experience at or near window surfaces that are at a noticeably lower temperature than the room air temperature. Lastly, although not measured in this experiment, highly insulating windows (triple-pane in this experiment) also have the potential to significantly reduce the noise transmittance through windows compared to standard double-pane windows. The metered data taken in the Lab Homes and data analysis presented here represent 70 days of data taken during the 2012 heating season. As such, the savings from highly insulating windows in the experimental home (Lab Home B) compared to the standard double-pane clear glass windows in the baseline home (Lab Home A) are only a portion of the energy savings expected from a year-long experiment that would include a cooling season. The cooling season experiment will take place in the homes in the summer of 2012, and results of that experiment will be reported in a subsequent report available to all stakeholders.

Parker, Graham B.; Widder, Sarah H.; Bauman, Nathan N.

2012-06-01T23:59:59.000Z

234

Community, Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation InInformationCenterResearchCASLNanoporous Materials |CommunityEnvironment

235

TTUS FP&C Design & Building Standards Division 8 Doors & Windows  

E-Print Network [OSTI]

8 ­ Doors & Windows General Energy conservation and sustainable design must be given thorough with State Energy Code and ASHRAE 90.1. Energy Efficient Exterior Openings shall comply with minimumTTUS FP&C Design & Building Standards Division 8 ­ Doors & Windows Page 1 of 11 Division

Gelfond, Michael

236

Reliability Assessment of Mass-Market Software: Insights from Windows Vista  

E-Print Network [OSTI]

Reliability Assessment of Mass-Market Software: Insights from Windows Vista® Paul Luo Li, Mingtian Ni, Song Xue, Joseph P. Mullally, Mario Garzia, Mujtaba Khambatti Microsoft Windows Reliability Team One Microsoft Way Redmond, WA USA Paul.Li@Microsoft.com Abstract Assessing the reliability of mass

Khambatt, Mujtaba

237

Window Spacers and Edge Seals in Insulating Glass Units: A State-of-the-Art  

E-Print Network [OSTI]

carbon dioxide (CO2) emissions in buildings is by increasing the thermal performance of their envelopes. Gustavsen Norwegian University of Science and Technology Windows and Envelope Materials Group Building), Windows & Envelope Materials Group, Berkeley, CA 94720- 8134, USA Abstract Insulating glass (IG) units

238

Design Windows for a He Cooled Fusion Reactor* Dai-Kai Sze and Ahmed Hassanein  

E-Print Network [OSTI]

Design Windows for a He Cooled Fusion Reactor* Dai-Kai Sze and Ahmed Hassanein Argonne National Laboratory 9700 South Cass Avenue, Argonne, IL 60439 EQUATIONDERIVATION ABSTRACT A design window concept is developed for a He-cooled fusion reactor blanket and divertor design. This concept allows study

Harilal, S. S.

239

Author's personal copy The time dependent vehicle routing problem with time windows  

E-Print Network [OSTI]

: (a) formulate a time dependent vehicle routing problem with a general cost function and time windowAuthor's personal copy The time dependent vehicle routing problem with time windows: Benchmark College of Engineering and Computer Science, PO Box 0751, Portland State University, Portland, OR 97207

Bertini, Robert L.

240

Silver nanowire transparent electrodes for liquid crystal-based smart windows  

E-Print Network [OSTI]

privacy glass or as energy saving windows through the modulation of solar heat gain [1,3,4]. The operating sheet resistance, and low-cost. While the benefits of increased transparency and low-cost are obvious Polymer dispersed liquid crystal Smart window a b s t r a c t A significant manufacturing cost of polymer

Goldthorpe, Irene

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Plasmonic Metamaterials and Nanocomposites with the Narrow Transparency Window Effect in Broad Extinction Spectra  

E-Print Network [OSTI]

Plasmonic Metamaterials and Nanocomposites with the Narrow Transparency Window Effect in Broad from 400 nm to 5 m but exhibit a narrow transparency window centered at a given wavelength. The main be designed as a solution, nanocomposite film or metastructure. The principle of the formation

Demir, Hilmi Volkan

242

Daylighting control performance of a thin-film ceramic electrochromic window: field study results  

E-Print Network [OSTI]

1 Daylighting control performance of a thin-film ceramic electrochromic window: field study results of this emerging technology. Keywords: Building energy-efficiency; Electrochromic windows; Daylighting; Control switched across their dynamic range and could be fully integrated into a complete daylight, glare

243

Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office  

E-Print Network [OSTI]

LBNL-6496E Empirical assessment of a prismatic daylight- redirecting window film in a full in Leukos, the journal of the IESNA. Empirical assessment of a prismatic daylight- redirecting window film Laboratory, Mailstop 90-3111, 1 Cyclotron Road, Berkeley, CA 94720 USA Abstract Daylight redirecting systems

244

Three-tank hoist scheduling problem with unbounded or zero-width processing windows  

E-Print Network [OSTI]

Three-tank hoist scheduling problem with unbounded or zero-width processing windows Fabien Mangione, the products are transferred in successive tanks by a hoist. Moreover, each processing time is nested between of identical parts in a balanced three-tank line. We prove that for zero-width or unbounded processing windows

Paris-Sud XI, Université de

245

Establishment of a Rating Program for Pre- and Post-Fabricated Windows  

SciTech Connect (OSTI)

This document was prepared to support the Smart Buildings-Material Testing and Rating Centres (SB-2) activity of the Asia-Pacific Economic Cooperation (APEC) Energy Smart Communities Initiative (ESCI). The ESCI was put forward by APEC Leaders at the 2010 meeting in Japan. APEC is the premier forum for facilitating economic growth, cooperation, trade and investment in the Asia-Pacific region. This document addresses the testing and certification of building products and equipment to support building energy codes, focusing specifically on energy-efficient factory-built windows. It sets forth a proposed structure for an APEC economy to establish a testing, rating, certification, and labeling program for efficient factory-built windows. In the context of this document, efficient windows would be windows made with insulating glass (IG) and an efficient frame assembly. The minimum efficiency metric (or thermal performance) for these windows is not quantified in this document and would generally be established by a governmental agency.

Parker, Graham B.; Mapes, Terry S.; Shah, B.; Bloyd, Cary N.

2011-08-01T23:59:59.000Z

246

Method of fabricating a microelectronic device package with an integral window  

DOE Patents [OSTI]

A method of fabricating a microelectronic device package with an integral window for providing optical access through an aperture in the package. The package is made of a multilayered insulating material, e.g., a low-temperature cofired ceramic (LTCC) or high-temperature cofired ceramic (HTCC). The window is inserted in-between personalized layers of ceramic green tape during stackup and registration. Then, during baking and firing, the integral window is simultaneously bonded to the sintered ceramic layers of the densified package. Next, the microelectronic device is flip-chip bonded to cofired thick-film metallized traces on the package, where the light-sensitive side is optically accessible through the window. Finally, a cover lid is attached to the opposite side of the package. The result is a compact, low-profile package, flip-chip bonded, hermetically-sealed package having an integral window.

Peterson, Kenneth A. (Albuquerque, NM); Watson, Robert D. (Tijeras, NM)

2003-01-01T23:59:59.000Z

247

Mechanical Research and Development of monocrystalline silicon neutron beam window for CSNS  

E-Print Network [OSTI]

The monocrystalline silicon neutron beam window is one of the key components of neutron spectrometers and thin circular plate.Monocrystalline silicon is a brittle material and its strength is not constant but is consistent with the Weibull distribution. The window is designed not simply through the average strength, but according to the survival rate. Bending deformation is the main form of the window, so dangerous parts of the neutron beam window is stress-linearized to the combination of membrane stress and bending stress. According to the Weibull distribution of bending strength of monocrystalline silicon based on a large number of experimental data, finally the optimized neutron beam window is 1.5mm thick. Its survival rate is 0.9994 and its transmittance is 0.98447; it meets both physical requirements and the mechanical strength.

Zhou Liang; Qu Hua-Min

2014-11-24T23:59:59.000Z

248

Performance Analysis of Contention Window Cheating Misbehaviors in Mobile Ad Hoc Networks  

E-Print Network [OSTI]

Mobile Ad Hoc Network (MANET) is a collection of nodes that can be rapidly deployed as a multi-hop network without the aid of any centralized administration. Misbehavior is challenged by bandwidth and energy efficient medium access control and fair share of throughput. Node misbehavior plays an important role in MANET. In this survey, few of the contention window misbehavior is reviewed and compared. The contention window cheating either minimizes the active communication of the network or reduces bandwidth utilization of a particular node. The classification presented is in no case unique but summarizes the chief characteristics of many published proposals for contention window cheating. After getting insight into the different contention window misbehavior, few of the enhancements that can be done to improve the existing contention window are suggested. The purpose of this paper is to facilitate the research efforts in combining the existing solutions to offer more efficient methods to reduce contention win...

Kalaiarasi, R; Pari, S Neelavathy; Sridharan, D

2010-01-01T23:59:59.000Z

249

State-of-the-Art Highly Insulating Window Frames - Research and Market Review  

SciTech Connect (OSTI)

This document reports the findings of a market and research review related to state-of-the-art highly insulating window frames. The market review focuses on window frames that satisfy the Passivhaus requirements (window U-value less or equal to 0.8 W/m{sup 2}K ), while other examples are also given in order to show the variety of materials and solutions that may be used for constructing window frames with a low thermal transmittance (U-value). The market search shows that several combinations of materials are used in order to obtain window frames with a low U-value. The most common insulating material seems to be Polyurethane (PUR), which is used together with most of the common structural materials such as wood, aluminum, and PVC. The frame research review also shows examples of window frames developed in order to increase the energy efficiency of the frames and the glazings which the frames are to be used together with. The authors find that two main tracks are used in searching for better solutions. The first one is to minimize the heat losses through the frame itself. The result is that conductive materials are replaced by highly thermal insulating materials and air cavities. The other option is to reduce the window frame area to a minimum, which is done by focusing on the net energy gain by the entire window (frame, spacer and glazing). Literature shows that a window with a higher U-value may give a net energy gain to a building that is higher than a window with a smaller U-value. The net energy gain is calculated by subtracting the transmission losses through the window from the solar energy passing through the windows. The net energy gain depends on frame versus glazing area, solar factor, solar irradiance, calculation period and U-value. The frame research review also discusses heat transfer modeling issues related to window frames. Thermal performance increasing measures, surface modeling, and frame cavity modeling are among the topics discussed. The review shows that the current knowledge gives the basis for improving the calculation procedures in the calculation standards. At the same time it is room for improvement within some areas, e.g. to fully understand the natural convection effects inside irregular vertical frame cavities (jambs) and ventilated frame cavities.

Gustavsen, Arild; Jelle, Bjorn Petter; Arasteh, Dariush; Kohler, Christian

2007-01-01T23:59:59.000Z

250

To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film in deep open  

E-Print Network [OSTI]

To be submitted to Solar Energy. Daylight performance of a microstructured prismatic window film Systems Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory with vertical windows have the potential to offset lighting energy use in deep perimeter zones

251

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

E-Print Network [OSTI]

window frames; To the left, a PVC window frame (S1) and toaluminum frame, S3 (left) and PVC frame, S4 (right) Figuremade of polyvinyl chloride (PVC) and two of aluminum. For

Gustavsen, Arlid

2008-01-01T23:59:59.000Z

252

Text-Alternative Version of Building America Webinar: Low-e Storms: The Next "Big Thing" in Window Retrofits  

Broader source: Energy.gov [DOE]

Low-e Storms: The Next Big Thing in Window RetrofitsOfficial Webinar Transcript (September 9, 2014)

253

Submitted to Energy and Buildings February 23, 2005 and accepted for publication March 1, 2006. Subject responses to electrochromic windows  

E-Print Network [OSTI]

. LBNL-57125 Subject responses to electrochromic windows R.D. Clear* , V. Inkarojrit, E.S. Lee Building in a private office with switchable electrochromic windows, manually- operated Venetian blinds, and dimmable fluorescent lights. The electrochromic window had a visible transmittance range of approximately 3

254

Side-by-Side Field Evaluation of Highly Insulating Windows in the PNNL Lab Homes  

SciTech Connect (OSTI)

To examine the energy, air leakage, and thermal performance of highly insulating windows, a field evaluation was undertaken in a matched pair of all-electric, factory-built Lab Homes located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The baseline Lab Home B was retrofitted with standard double-pane clear aluminum-frame slider windows and patio doors, while the experimental Lab Home A was retrofitted with Jeld-Wen triple-pane vinyl-frame slider windows and patio doors with a U-factor of 0.2 and solar heat gain coefficient of 0.19. To assess the window, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2012 winter heating and summer cooling seasons. The measured energy savings in Lab Home B averaged 5,821 watt-hours per day (Wh/day) during the heating season and 6,518 Wh/day during the cooling season. The overall whole-house energy savings of Lab Home B compared to Lab Home A are 11.6% 1.53% for the heating season and 18.4 2.06% for the cooling season for identical occupancy conditions with no window coverings deployed. Extrapolating these energy savings numbers based on typical average heating degree days and cooling degree days per year yields an estimated annual energy savings of 12.2%, or 1,784 kWh/yr. The data suggest that highly insulating windows are an effective energy-saving measure that should be considered for high-performance new homes and in existing retrofits. However, the cost effectiveness of the measure, as determined by the simple payback period, suggests that highly insulating window costs continue to make windows difficult to justify on a cost basis alone. Additional reductions in costs via improvements in manufacturing and/or market penetration that continue to drive down costs will make highly insulating windows much more viable as a cost-effective energy efficiency measure. This study also illustrates that highly insulating windows have important impacts on peak load, occupant comfort, and condensation potential, which are not captured in the energy savings calculation. More consistent and uniform interior temperature distributions suggest that highly insulated windows, as part of a high performance building envelope, may enable more centralized duct design and downsized HVAC systems. Shorter, more centralized duct systems and smaller HVAC systems to yield additional cost savings, making highly insulating windows more cost effective as part of a package of new construction or retrofit measures which achieve significant reductions in home energy use.

Widder, Sarah H.; Parker, Graham B.; Baechler, Michael C.; Bauman, Nathan N.

2012-08-01T23:59:59.000Z

255

Endocrine disrupting chemicals affect the adipogenic differentiation of mesenchymal stem cells in distinct ontogenetic windows  

SciTech Connect (OSTI)

Highlights: Black-Right-Pointing-Pointer Endocrine disrupting chemicals affect adipogenesis in mesenchymal stem cells (MSC). Black-Right-Pointing-Pointer The adipogenic impact depends strongly on the window of exposure. Black-Right-Pointing-Pointer Bisphenol A reduces the potential of MSC to differentiate into adipocytes. Black-Right-Pointing-Pointer DEHP and TBT trigger the adipogenic differentiation of mesenchymal stem cells. Black-Right-Pointing-Pointer BPA, DEHP and TBT did not affect adipogenesis in embryonic stem cells. -- Abstract: Endocrine disrupting chemicals (EDC) like bisphenol A (BPA), bis(2-ethylhexyl)phthalate (DEHP) and tributyltin (TBT) are ubiquitously present in the environment and in human tissues. They bind to nuclear hormone receptors and affect cellular and developmental processes. In this study, we show that BPA, DEHP and TBT affect the adipogenic differentiation of murine mesenchymal stem cells (MSC, C3H/10T1/2) in a concentration-, stage- and compound-specific manner. C3H/10T1/2 cells and embryonic stem cells (CGR8) were exposed to BPA, DEHP or TBT at different stages of cell determination and differentiation (undifferentiated growth, adipogenic induction and terminal adipogenic differentiation). The final amount of differentiated adipocytes, cellular triglyceride content and mRNA expression of adipogenic marker genes (adiponectin, FABP4, PPAR{gamma}2, LPL) were quantified and compared with corresponding unexposed cells. BPA (10 {mu}M) decreased subsequent adipogenic differentiation of MSC, when cells were exposed during undifferentiated growth. In contrast, DEHP (100 {mu}M) during the hormonal induction period, and TBT (100 nM) in all investigated stages, enhanced adipogenesis. Importantly, exposure of undifferentiated murine embryonic stem cells did not show any effect of the investigated EDC on subsequent adipogenic differentiation.

Biemann, Ronald, E-mail: ronald.biemann@medizin.uni-halle.de [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany); Navarrete Santos, Anne [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany); Navarrete Santos, Alexander [Department of Cardiothoracic Surgery, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Cardiothoracic Surgery, Martin Luther University, Faculty of Medicine, Halle (Germany); Riemann, Dagmar [Department of Immunology, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Immunology, Martin Luther University, Faculty of Medicine, Halle (Germany); Knelangen, Julia [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany); Blueher, Matthias [Department of Medicine, University of Leipzig, Leipzig (Germany)] [Department of Medicine, University of Leipzig, Leipzig (Germany); Koch, Holger [Institute for Prevention and Occupational Medicine of the German Social Accident Insurance, Institute of the Ruhr-University Bochum (IPA), Ruhr-University Bochum, Bochum (Germany)] [Institute for Prevention and Occupational Medicine of the German Social Accident Insurance, Institute of the Ruhr-University Bochum (IPA), Ruhr-University Bochum, Bochum (Germany); Fischer, Bernd [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany)] [Department of Anatomy and Cell Biology, Martin Luther University, Faculty of Medicine, Halle (Germany)

2012-01-13T23:59:59.000Z

256

Analysis of oil-pipeline distribution of multiple products subject to delivery time-windows  

E-Print Network [OSTI]

This dissertation defines the operational problems of, and develops solution methodologies for, a distribution of multiple products into oil pipeline subject to delivery time-windows constraints. A multiple-product oil pipeline is a pipeline system...

Jittamai, Phongchai

2006-04-12T23:59:59.000Z

257

Galadriel: A Display List-Based Window Manager Graphics Workstation Division  

E-Print Network [OSTI]

to a VAX (780) running an internal Tek version of (relatively standard) 4.2bsd UNIX. So far, it's been'' is about as close as we could come to a mythological ``window manager''. VAX and VT100 are trademarks

Lewis, Robert R.

258

Playing in the X-Games Window on the Extreme Universe  

E-Print Network [OSTI]

Playing in the X-Games Window on the Extreme Universe Yucca Mountain The Unseen Scholars 1663 LOS, TECHNOLOGY, AND ENGINEERING 2 8 20 Trident MAJOR PLAYER IN THE X-GAMES OF CONTEMPORARY SCIENCE Yucca Mountain

259

Electrochromic windows for commercial buildings: Monitored results from a full-scale testbed  

E-Print Network [OSTI]

electrochromic window products will appear on the market.market and technology assessments apply conventional life-cycle cost analysis methods to determine the viability of electrochromicmarket assessments have been conducted by industry, but this information remains proprietary. Electrochromic

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Selkowitz, Stephen E.

2000-01-01T23:59:59.000Z

260

Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Improved Performance. Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based Solar Cells for Improved Performance. Abstract: We report on CdSCdTe photovoltaic devices...

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Drafty Windows: Is it Better to Insulate or Replace Them? | Department...  

Broader source: Energy.gov (indexed) [DOE]

expensive method is a simple window insulation kit, which includes a large sheet of plastic and double-sided tape; the most expensive (and most efficient) method is to replace...

262

Low-e Storm Windows: Market Assessment and Pathways to Market Transformation  

SciTech Connect (OSTI)

Field studies sponsored by the U.S. Department of Energy (DOE) have shown that the use of low-e storm windows can lead to significant heating and cooling energy savings in residential homes. This study examines the market for low-e storm windows based on market data, case studies, and recent experience with weatherization deployment programs. It uses information from interviews conducted with DOE researchers and industry partners involved in case studies and early deployment efforts related to low-e storm windows. In addition, this study examines potential barriers to market acceptance, assesses the market and energy savings potential, and identifies opportunities to transform the market for low-e storm windows and overcome market adoption barriers.

Cort, Katherine A.

2013-06-08T23:59:59.000Z

263

Evaluation of NTE Windows and a Work-Based Method to Determine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and a Work-Based Method to Determine In-Use Emissions of a Heavy-Duty Diesel Engine Evaluation of NTE Windows and a Work-Based Method to Determine In-Use Emissions of a...

264

Window-Related Energy Consumption in the US Residential and Commercial Building Stock  

E-Print Network [OSTI]

window related primary energy consumption of the US building= 1.056 EJ. Primary energy consumption includes a site-to-the amount of primary energy consumption required by space

Apte, Joshua; Arasteh, Dariush

2008-01-01T23:59:59.000Z

265

Copper Doped GaAs Infrared Filter for the 8-13 m Atmospheric Window  

E-Print Network [OSTI]

regions of interest, such as atmospheric transmission windows. Filters exclude solar or thermal photonsCdTe is typically melt grown in a high temperature furnace. All three elements in this alloy are toxic. Stability

Peale, Robert E.

266

Design and validation of an air window for a molten salt solar thermal receiver  

E-Print Network [OSTI]

This thesis contributes to the development of Concentrating Solar Power (CSP) receivers and focuses on the design of an efficient aperture. An air window is proposed for use as the aperture of a CSP molten salt receiver ...

Paxson, Adam Taylor

2009-01-01T23:59:59.000Z

267

Building America Webinar: Low-E Storms: The Next Big Thing in Window Retrofits  

Broader source: Energy.gov [DOE]

Until recently, energy-efficient window retrofit options have largely been limited to repair or replacement; leaving the homeowner to decide between affordability and deeper energy savings. A new...

268

State-of-the-Art Highly Insulating Window Frames - Research and Market Review  

E-Print Network [OSTI]

analysis investigation of a PVC window frame naturally agedThermix / TGI-wave 1.23 x 1.48 PVC profile with PUR (? =TOPLINE Plus Rahmenmaterial: PVC- Profile, Kammern mit PU

Gustavsen, Arild

2008-01-01T23:59:59.000Z

269

[send to printer] [close this window] What's Happening from Environmental Building News  

E-Print Network [OSTI]

[send to printer] [close this window] What's Happening from Environmental Building News July 1-by-step move toward the goals of Architecture 2030's "2030 Challenge" to eliminate fossil-fuel use in all new

270

The Window Market in Texas: Opportunities for Energy Savings and Demand Reduction  

E-Print Network [OSTI]

The use of high performance windows represents a promising opportunity to reduce energy consumption and summer electrical demand in homes and commercial buildings in Texas and neighboring states. While low-e glass coatings and other energy...

Zarnikau, J.; Campbell, L.

2002-01-01T23:59:59.000Z

271

The development and evaluation of a neutron window filter facility utilizing the TAMU NSC TRIGA reactor  

E-Print Network [OSTI]

THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Submitted to the Graduate College of Texas AAM University in partial fulfillment of the requirement... for the degree of MASTER OF SCIENCE December 1982 Major Subject: Nuclear Engineering THE DEVELOPMENT AND EVALUATION OF A NEUTRON WINDOW FILTER FACILITY UTILIZING THE TAMU NSC TRIGA REACTOR A Thesis by PATRICIA COLLEEN HARDING Approved as to style...

Harding, Patricia Colleen

2012-06-07T23:59:59.000Z

272

Evaluation of Low-E Storm Windows in the PNNL Lab Homes  

SciTech Connect (OSTI)

This study examines the performance of exterior and interior low-e storm panels with a controlled whole home experimental design using PNNL's Lab Homes. Summing the estimated annual average heating and cooling savings, the installation of low-e storm panels resulted in approximately 10% annual energy savings. The results of the experiment will be used to determine and validate performance of low-e storm windows over double pane clear glass windows in a whole home setting.

Knox, Jake R.; Widder, Sarah H.

2014-05-31T23:59:59.000Z

273

Development of a design procedure for architectural laminated glass window units  

E-Print Network [OSTI]

DEVELOPMENT OF A DESIGN PROCEDURE FOR ARCHITECTURAL LAMINATED GLASS WINDOW UNITS A Thesis by JEFFREY AARON DICE Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1992 Major Subject: Civil Engineering DEVELOPMENT OF A DESIGN PROCEDURE FOR ARCHITECTURAL LAMINATED GLASS WINDOW UNITS A Thesis by JEFFREY AARON DICE Approved as to style and content by: . L n Beason (Chair o Committee...

Dice, Jeffrey Aaron

1992-01-01T23:59:59.000Z

274

Sensitivity analysis of window characteristics and their interactions on thermal performance in residential buildings  

E-Print Network [OSTI]

acheived during daytime heating hours contribute to energy conservation by reducing the amount of auxiliary heat required to keep the interior temperatures at the desired levels (Balcomb et al. 1984). Proper utilization of solar heat gains should... in the thermal mass will be released to keep the building warm (Balcomb et al. 1984). Proper shading of windows can also greatly affect their thermal performance. Windows with properly designed shading and orientation supply a major portion of a buildings...

George, Julie N

1996-01-01T23:59:59.000Z

275

Characterization of Energy Savings and Thermal Comfort Improvements Derived from Using Interior Storm Windows  

SciTech Connect (OSTI)

This field study of a single historic home in Seattle, WA documents the performance of Indow Windowss interior storm window inserts. Energy use and the temperature profile of the house were monitored before and after the installation of the window inserts and changes in the two recorded metrics were examined. Using the defined analysis approach, it was determined that the interior storm windows produced a 22% reduction of the HVAC energy bill and had an undetermined effect on the thermal comfort in the house. Although there was no measurable changes in the thermal comfort of the house, the occupant noted the house to be warmer in the winter and cooler in the summer and that the temperatures are more even (throughout the house). The interior storm windows were found to be not cost effective, largely due to the retrofits completed on its heating system. However, if the economic analysis was conducted based on the old heating system, a 72% efficient oil fired furnace, the Indow Windows proved to be economical and had a simple payback period of 9.0 years.

Knox, Jake R.; Widder, Sarah H.

2013-09-30T23:59:59.000Z

276

High Power RF Tests on WR650 Pre-Stressed Planar Windows  

SciTech Connect (OSTI)

A new planar, ceramic window intended to be used with WR650 waveguide fundamental power couplers at 1300 MHz or 1500 MHz has been developed. It is based on the pre-stressed planar window concept tested in PEP II and LEDA. A test stand that made use of the 100kW CW 1500 MHz RF system in the JLAB FEL was commissioned and used to apply up to 80 kW traveling wave (TW)to the windows. Two different types of RF windows (brazed and diffusion bonded ceramics) with design specification of 50 kW CW in TW mode were successfully tested both as a gas barrier (intended to operate up to 2 psi) and as a vacuum barrier. The vacuum windows were able to maintain UHV quality vacuum and were successfully operated in the 10{sup -9} mbar range. An overview of the pre-stressed power windows, RF test stand, procedures and RF power testing results will be presented.

Stirbet, Mircea [JLAB; Davis, G. Kirk [JLAB; Elliott, Thomas S. [JLAB; King, Larry [JLAB; Powers, Thomas J. [JLAB; Rimmer, Robert A. [JLAB; Walker, Richard L. [JLAB

2009-11-01T23:59:59.000Z

277

Apparatus and method for in-situ cleaning of resist outgassing windows  

DOE Patents [OSTI]

An apparatus and method for in-situ cleaning of resist outgassing windows. The apparatus includes a chamber located in a structure, with the chamber having an outgassing window to be cleaned positioned in alignment with a slot in the chamber, whereby radiation energy passes through the window, the chamber, and the slot onto a resist-coated wafer mounted in the structure. The chamber is connected to a gas supply and the structure is connected to a vacuum pump. Within the chamber are two cylindrical sector electrodes and a filament is electrically connected to one sector electrode and a power supply. In a first cleaning method the sector electrodes are maintained at the same voltage, the filament is unheated, the chamber is filled with argon (Ar) gas under pressure, and the window is maintained at a zero voltage, whereby Ar ions are accelerated onto the window surface, sputtering away carbon deposits that build up as a result of resist outgassing. A second cleaning method is similar except oxygen gas (O.sub.2) is admitted to the chamber instead of Ar. These two methods can be carried out during lithographic operation. A third method, carried out during a maintenance period, involves admitting CO.sub.2 into the chamber, heating the filament to a point of thermionic emission, the sector electrodes are at different voltages, excited CO.sub.2 gas molecules are created which impact the carbon contamination on the window, and gasify it, producing CO gaseous products that are pumped away.

Klebanoff, Leonard E. (San Ramon, CA); Haney, Steven J. (Tracy, CA)

2001-01-01T23:59:59.000Z

278

Ecology and environment  

E-Print Network [OSTI]

Ecology and environment Essentials Courses MSci (Hons) in Ecology and Environment MSci (Hons) in Ecology and Environment (research placement) BSc (Hons) in Ecology and Environment Foundation year for UK for the MSci in Ecology and Environment (research placement): AAA Typical A level offer range for the other

Sussex, University of

279

Test for Modeling Windows in DOE 2.1E for Comparing the Window Library with the Shading Coefficient Method for a Single-Family Residence in Texas  

E-Print Network [OSTI]

. The window simulation tests are performed using single-pane, double-pane, and low-e glass on two standard DOE 2.1E single-family house models: 1) the model which has the R-value for wall, roof and floor according to 2000 IECC (Quick Wall), and 2) the model...

Kim, S.; Haberl, J. S.

2008-07-18T23:59:59.000Z

280

COW test of the weak equivalence principle: A low-energy window to look into the noncommutative structure of space-time?  

E-Print Network [OSTI]

We construct the quantum mechanical model of the COW experiment assuming that the underlying space time has a granular structure, described by a canonical noncommutative algebra of coordinates $x^{\\mu}$. The time-space sector of the algebra is shown to add a mass-dependent contribution to the gravitational acceleration felt by neutron deBrogli waves measured in a COW experiment. This makes time-space noncommutativity a potential candidate for an apparent violation of WEP even if the ratio of the inertial mass $m_{i}$ and gravitational mass $m_{g}$ is a universal constant. The latest experimental result based on COW principle is shown to place an upper-bound several orders of magnitude stronger than the existing one on the time-space noncommutative parameter. We argue that the evidence of NC structure of space-time may be found if the COW-type experiment can be repeated with several particle species.

Anirban Saha

2013-06-18T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

UNDERGRADUATE DEGREES 2015 ENVIRONMENT  

E-Print Network [OSTI]

COME AND YOUR F I N D PLACE UNDERGRADUATE DEGREES 2015 EARTH and ENVIRONMENT #12;| CONTENTS | www OF EARTH AND ENVIRONMENT Why study earth and environment at Leeds? 2 Why study an earth science course? 4 Why study an environment course? 8 Choosing the right degree 12 Four-year industrial degrees (BA

282

An Experimental and Analytical Evaluation of Wall And Window Retrofit Configurations: Supporting the Residential Retrofit Best Practices Guide  

SciTech Connect (OSTI)

A Retrofit Best Practices Guide was developed to encourage homeowners to consider energy conservation issues whenever they modify their siding or windows. In support of this guide, an experimental program was implemented to measure the performance of a number of possible wall siding and window retrofit configurations. Both thermal and air-leakage measurements were made for a 2.4 x 2.4 m (8 x 8 ft) wall section with and without a 0.9 x 1.2 m (3 x 4 ft) window. The windows tested were previously well-characterized at a dedicated window test facility. A computer model was also used to provide information for the Best Practices Guide. The experimental data for walls and windows were used in conjunction with this model to estimate the total annual energy savings for several typical houses in a number of different locations.

Stovall, Therese K [ORNL; Petrie, Thomas [ORNL; Kosny, Jan [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL; Hulvey, Kimberly D [ORNL

2007-11-01T23:59:59.000Z

283

ENERGY & ENVIRONMENT DIVISION. ANNUAL REPORT FY 1980  

E-Print Network [OSTI]

lights 100 W bulb to fluorescent (1) Storm windows Centraldamper 100 W bulb to fluorescent (2) R-11 insulationin walls 3-way bulb to fluorescent Caulking Gas range Window

Authors, Various

2010-01-01T23:59:59.000Z

284

Database of Low-e Storm Window Energy Performance across U.S. Climate Zones  

SciTech Connect (OSTI)

This is an update of a report that describes process, assumptions, and modeling results produced Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone.

Culp, Thomas D.; Cort, Katherine A.

2014-09-04T23:59:59.000Z

285

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning  

E-Print Network [OSTI]

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning Beloningsbaserad Inlarning Defining the Problem Known Environment Unknown Environment Improvements 1 Defining the Problem Framework Role of Reward Simplifying Assumptions Central Concepts 2 Known Environment Bellmans

Kjellstrm, Hedvig

286

Lesson 34a: Environment  

E-Print Network [OSTI]

Pasifiki [Pacific Ocean] Bahari Aktiki [Arctic Ocean] Bahari ya Mediterani [Mediterranean Sea] Bahari yaLesson 34a: Environment Environment [mazingira] bahari / bahari [ocean / sea / oceans / seas / farms] Bahari [ocean / sea] Bahari Hindi [Indian Ocean] Bahari Atlantiki [Atlantic Ocean] Bahari

287

Print this article Close This Window EU OKs India joining ITER nuclear reactor project  

E-Print Network [OSTI]

Print this article Close This Window EU OKs India joining ITER nuclear reactor project Fri Dec 2-billion-euro project to build an experimental nuclear fusion reactor that in the long-run could provide virtually unlimited, cheap and clean energy. The EU's willingness to work with India on a civil nuclear

288

Benefits of the International Residential Code's Maximum Solar heat Gain Coefficient Requirement for Windows  

E-Print Network [OSTI]

Texas adopted in its residential building energy code a maximum 0.40 solar heat gain coefficient (SHGC) for fenestration (e.g., windows, glazed doors and skylights)-a critical driver of cooling energy use, comfort and peak demand. An analysis...

Stone, G. A.; DeVito, E. M.; Nease, N. H.

2002-01-01T23:59:59.000Z

289

Combining MetaHeuristics to Effectively Solve the Vehicle Routing Problems with Time Windows  

E-Print Network [OSTI]

' requests with the minimal operational cost as usually measured by the number of vehicles used multiplied1 Combining Meta­Heuristics to Effectively Solve the Vehicle Routing Problems with Time Windows Engineering, The University of Hong Kong Pokfulam Road, Hong Kong. Department of Computer Science National

Tam, Vincent W. L.

290

Functional genomics as a window on radiation stress signaling Sally A Amundson*,1  

E-Print Network [OSTI]

Functional genomics as a window on radiation stress signaling Sally A Amundson*,1 , Michael Bittner 20892, USA; 2 National Human Genome Research Institute, National Institutes of Health, Bethesda, MD before the completion of the human genome draft sequence, a number of techniques for genomic expression

291

Boot Camp: System Requirements for Microsoft Windows Last Modified: June 17, 2008  

E-Print Network [OSTI]

Boot Camp: System Requirements for Microsoft Windows · Last Modified: June 17, 2008 · Article: HT1899 · Old Article: 306538 Summary Apple's Boot Camp software, included with Mac OS X 10.5 Leopard. System requirements To use Boot Camp with Mac OS X 10.5 you need the following: · An Intel-based Mac

Papautsky, Ian

292

REAL-TIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS  

E-Print Network [OSTI]

REAL-TIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS SVEN O that are no worse than 1% from optimum on state-of-the-art personal computers. 1. INTRODUCTION The German Automobile Association ADAC (Allgemeiner Deutscher Automobil- Club), the second largest automobile club worldwide

Krumke, Sven O.

293

REALTIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS  

E-Print Network [OSTI]

REAL­TIME DISPATCHING OF GUIDED AND UNGUIDED AUTOMOBILE SERVICE UNITS WITH SOFT TIME WINDOWS SVEN O that are no worse than 1% from optimum on state­of­the­art personal computers. 1. INTRODUCTION The German Automobile Association ADAC (Allgemeiner Deutscher Automobil­ Club), the second largest automobile club worldwide

Krumke, Sven O.

294

Public release date: 6-Dec-2010 [ Print | E-mail | Share ] [ Close Window  

E-Print Network [OSTI]

Public release date: 6-Dec-2010 [ Print | E-mail | Share ] [ Close Window ] Contact: Kyle Delaney k ubiquitously used metal, thin-film electrodes. The Northwestern University group in collaboration with SANDIA-like carbon electrodes rather than metal thin films and found a dramatic improvement in device robustness

Espinosa, Horacio D.

295

Dynamic Adaptation of Joint Transmission Power and Contention Window in VANET  

E-Print Network [OSTI]

of transmission power is crucial. We propose to decrease the transmission power for high vehicle density or high penetration ratio and increase the transmission power for lower vehicle density or penetration ratioDynamic Adaptation of Joint Transmission Power and Contention Window in VANET 1 Danda B. Rawat, 2

Weigle, Michele

296

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Window Frames  

E-Print Network [OSTI]

1 Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer Arasteh and Dragan Curcija ABSTRACT Accurately analyzing heat transfer in window frame cavities radiation heat-transfer effects.) We examine three representative complex cavity cross-section profiles

297

The Analysis and Design of Windowed Fourier Frame based Multiple Description Source Coding Schemes \\Lambda  

E-Print Network [OSTI]

transform. For the optimal windows, explicit representation formulas are obtained and non transform, redundant sets Acknowledgments The authors wish to thank the anonymous referees, no.7, November 2000, pp. 2491--2536 y current address: Siemens Corporate Research, 755 College Road

Balan, Radu V.

298

The composite face illusion: A whole window into our understanding of holistic face perception  

E-Print Network [OSTI]

The composite face illusion: A whole window into our understanding of holistic face perception when the bottom halves are spatially offset: The composite face effect. This composite face paradigm our understanding of holistic face perception. Finally, I explain how this standard composite face

Rossion, Bruno

299

High Accuracy 65nm OPC Verification: Full Process Window Model vs. Critical Failure ORC  

E-Print Network [OSTI]

High Accuracy 65nm OPC Verification: Full Process Window Model vs. Critical Failure ORC Amandine of Mask Rule Checking (MRC) and Optical Rule Checking (ORC) have become indispensable tools for ensuring, a technique known as Critical Failure ORC (CFORC) was introduced that uses optical parameters from aerial

Boyer, Edmond

300

Lyman Maynard Stowe Library 1 of 5 PDA Troubleshooting Shots 2006 Install (Windows Mobile 5)  

E-Print Network [OSTI]

Lyman Maynard Stowe Library 1 of 5 PDA Troubleshooting Shots 2006 Install (Windows Mobile 5) Step 1: StrongARM Processor for Pocket PC 2003 and later o Under Pocket PC Mobile 5.0 Shots 2006 CAB File ­ locate and download (save) the file: Shots 2006 Mobile 5.0 CAB Need Help? CEC 679-8870 #12;Lyman Maynard

Kim, Duck O.

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Matching the waveform and the temporal window in the creation of experimental signals  

E-Print Network [OSTI]

to a discrete-frequency representation in which the Fourier transform of the windowed signal preserves" wherein the power spectrum acquires power outside the frequency band of the original waveform. The spectrum be- comes a continuum with all frequencies, inside and outside the waveform band, represented more

302

Fast and accurate direct MDCT to DFT conversion with arbitrary window functions  

E-Print Network [OSTI]

1 Fast and accurate direct MDCT to DFT conversion with arbitrary window functions Shuhua Zhang* and Laurent Girin Abstract--In this paper, we propose a method for direct con- version of MDCT coefficients of the MDCT-to- DFT conversion matrices into a Toeplitz part plus a Hankel part. The latter is split

Paris-Sud XI, Université de

303

Journal of Biomedical Optics 16(2), 028004 (February 2011) Improving the therapeutic window of retinal  

E-Print Network [OSTI]

by coupling a 532-nm laser into a 200-m core multimode optical fiber at a 4­7 deg angle to normal incidenceJournal of Biomedical Optics 16(2), 028004 (February 2011) Improving the therapeutic window approaches toward increasing TW are investigated: (a) decreasing the central irradiance of the laser beam

Palanker, Daniel

304

Calculation program for design of windows in residential buildings Ins Palma Santos and Svend Svendsen*  

E-Print Network [OSTI]

sustainable buildings at the Department of Civil Engineering at the Technical University of Denmark1 Calculation program for design of windows in residential buildings Inês Palma Santos and Svend Svendsen* Department of Civil Engineering, Brovej, Building 118, Technical University of Denmark, DK-2800

305

A MODEL FOR THE FLEET SIZING OF DEMAND RESPONSIVE TRANSPORTATION SERVICES WITH TIME WINDOWS  

E-Print Network [OSTI]

A MODEL FOR THE FLEET SIZING OF DEMAND RESPONSIVE TRANSPORTATION SERVICES WITH TIME WINDOWS Marco a demand responsive transit service with a predetermined quality for the user in terms of waiting time models; Continuous approximation models; Paratransit services; Demand responsive transit systems. #12;3 1

Dessouky, Maged

306

Planck 2015 results. IV. Low Frequency Instrument beams and window functions  

E-Print Network [OSTI]

This paper presents the characterization of the in-flight beams, the beam window functions, and the associated uncertainties for the Planck Low Frequency Instrument (LFI). The structure of the paper is similar to that presented in the 2013 Planck release; the main differences concern the beam normalization and the delivery of the window functions to be used for polarization analysis. The in-flight assessment of the LFI main beams relies on measurements performed during observations of Jupiter. By stacking data from seven Jupiter transits, the main beam profiles are measured down to -25 dB at 30 and 44 GHz, and down to -30 dB at 70 GHz. The agreement between the simulated beams and the measured beams is confirmed to be better than 1% at each LFI frequency band (within the 20 dB contour from the peak, the rms values are: 0.1% at 30 and 70 GHz; 0.2% at 44 GHz). Simulated polarized beams are used for the computation of the effective beam window functions. The error budget for the window functions is estimated fro...

Ade, P A R; Ashdown, M; Aumont, J; Baccigalupi, C; Banday, A J; Barreiro, R B; Bartolo, N; Battaner, E; Benabed, K; Benot, A; Benoit-Lvy, A; Bernard, J -P; Bersanelli, M; Bielewicz, P; Bonaldi, A; Bonavera, L; Bond, J R; Borrill, J; Bouchet, F R; Bucher, M; Burigana, C; Butler, R C; Calabrese, E; Cardoso, J -F; Catalano, A; Chamballu, A; Christensen, P R; Colombi, S; Colombo, L P L; Crill, B P; Curto, A; Cuttaia, F; Danese, L; Davies, R D; Davis, R J; de Bernardis, P; de Rosa, A; de Zotti, G; Delabrouille, J; Dickinson, C; Diego, J M; Dole, H; Donzelli, S; Dor, O; Douspis, M; Ducout, A; Dupac, X; Efstathiou, G; Elsner, F; Enlin, T A; Eriksen, H K; Fergusson, J; Finelli, F; Forni, O; Frailis, M; Franceschi, E; Frejsel, A; Galeotta, S; Galli, S; Ganga, K; Giard, M; Giraud-Hraud, Y; Gjerlw, E; Gonzlez-Nuevo, J; Grski, K M; Gratton, S; Gregorio, A; Gruppuso, A; Hansen, F K; Hanson, D; Harrison, D L; Henrot-Versill, S; Herranz, D; Hildebrandt, S R; Hivon, E; Hobson, M; Holmes, W A; Hornstrup, A; Hovest, W; Huffenberger, K M; Hurier, G; Jaffe, A H; Jaffe, T R; Juvela, M; Keihnen, E; Keskitalo, R; Kiiveri, K; Kisner, T S; Knoche, J; Kunz, M; Kurki-Suonio, H; Lhteenmki, A; Lamarre, J -M; Lasenby, A; Lattanzi, M; Lawrence, C R; Leahy, J P; Leonardi, R; Lesgourgues, J; Levrier, F; Liguori, M; Lilje, P B; Linden-Vrnle, M; Lindholm, V; Lpez-Caniego, M; Lubin, P M; Macas-Prez, J F; Maggio, G; Maino, D; Mandolesi, N; Mangilli, A; Martin, P G; Martnez-Gonzlez, E; Masi, S; Matarrese, S; Mazzotta, P; McGehee, P; Meinhold, P R; Melchiorri, A; Mendes, L; Mennella, A; Migliaccio, M; Mitra, S; Montier, L; Morgante, G; Mortlock, D; Moss, A; Munshi, D; Murphy, J A; Naselsky, P; Nati, F; Natoli, P; Netterfield, C B; Nrgaard-Nielsen, H U; Novikov, D; Novikov, I; Paci, F; Pagano, L; Paoletti, D; Partridge, B; Pasian, F; Patanchon, G; Pearson, T J; Perdereau, O; Perotto, L; Perrotta, F; Pettorino, V; Piacentini, F; Pierpaoli, E; Pietrobon, D; Pointecouteau, E; Polenta, G; Pratt, G W; Przeau, G; Prunet, S; Puget, J -L; Rachen, J P; Rebolo, R; Reinecke, M; Remazeilles, M; Renzi, A; Rocha, G; Rosset, C; Rossetti, M; Roudier, G; Rubio-Martn, J A; Rusholme, B; Sandri, M; Santos, D; Savelainen, M; Scott, D; Seiffert, M D; Shellard, E P S; Spencer, L D; Stolyarov, V; Sutton, D; Suur-Uski, A -S; Sygnet, J -F; Tauber, J A; Terenzi, L; Toffolatti, L; Tomasi, M; Tristram, M; Tucci, M; Tuovinen, J; Umana, G; Valenziano, L; Valiviita, J; Van Tent, B; Vassallo, T; Vielva, P; Villa, F; Wade, L A; Wandelt, B D; Watson, R; Wehus, I K; Yvon, D; Zacchei, A; Zonca, A

2015-01-01T23:59:59.000Z

307

Service quality planning for freight distribution with time windows in large networks  

E-Print Network [OSTI]

as a quality factor of the service, since its nature and configuration also affects the total transportation1 Service quality planning for freight distribution with time windows in large networks Francesco introduces a methodology whose aim is to evaluate how the quality of a freight distribution service with time

Paris-Sud XI, Université de

308

ADAPTIVE BLIND DECONVOLUTION OF LINEAR CHANNELS USING RENYI'S ENTROPY WITH PARZEN WINDOW ESTIMATION  

E-Print Network [OSTI]

ADAPTIVE BLIND DECONVOLUTION OF LINEAR CHANNELS USING RENYI'S ENTROPY WITH PARZEN WINDOW ESTIMATION of Cantabria, Santander, Spain Abstract. Blind deconvolution of linear channels is a fundamental signal, as a criterion for blind deconvolution of linear channels. Comparisons between maximum and minimum entropy

Slatton, Clint

309

1488 IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 49, NO. 8, AUGUST 2001 An Overlapping Window Decorrelating Multiuser  

E-Print Network [OSTI]

1488 IEEE TRANSACTIONS ON COMMUNICATIONS, VOL. 49, NO. 8, AUGUST 2001 An Overlapping Window, University of Victoria, Victoria, BC V8W 3P6, Canada. He is now wit PMC-Sierrra Corporation, Burnaby, BC V5A of Electrical and Computer Engineering, University of Victoria, Victoria, BC V8W 3P6, Canada (e-mail: wslu

Lu, Wu-Sheng

310

NCEP Products Available to Distribute to CONDUIT High-Resolution Window Forecast System (HIRESW) Full  

E-Print Network [OSTI]

NCEP Products Available to Distribute to CONDUIT Phase 1 High-Resolution Window Forecast System Ocean Forecast System (RTOFS) Full Description Product Location The RTOFS for the North Atlantic resolution nest Hurricane Weather Research and Forecast (HWRF) system Full Description Product Location (hwrf

311

IEA-SHC Task 27: Environmental Performance Assessment of glazing and windows: context, overview, main concerns  

E-Print Network [OSTI]

IEA-SHC Task 27: Environmental Performance Assessment of glazing and windows: context, overview and objectives, and most often of limited use in other contexts. A short review of the studies already performed the work undertaken within the programme of IEA/SHCP/Task 27, which will be presented in the third part

312

Analysis of the Double Window in Saving Energy and Economical Efficiency in Nanjing in the Winter  

E-Print Network [OSTI]

steel window can save energy by 37.68% is reached. As part of the economical efficiency analysis, an investment payback period is analyzed using the methods of static state and dynamic state. The analysis shows that by using single frame-double plastic...

Zhang, Y.; He, J.; Gao, S.

2006-01-01T23:59:59.000Z

313

Energy performance of a dual airflow window under different climates Jingshu Wei1  

E-Print Network [OSTI]

great po tential in conserving energy in buildings and provide fresh air to improve indoor air qua lity in fi ve different climate zones in China. The energy used by the apartment with blinds windows and low-e and by buildings in China acco unts for nearly 30 % o f the total primary energy and HVAC syste ms use 55

Chen, Qingyan "Yan"

314

Public release date: 19-Feb-2005 [ Print Article | E-mail Article | Close Window  

E-Print Network [OSTI]

Rosenberg of the University of New Hampshire and a member of the U.S. Commission on Ocean Policy, and Jeremy Marine Fisheries Service, Andy Rosenberg has faced the difficult realities of implementing new fisheriesPublic release date: 19-Feb-2005 [ Print Article | E-mail Article | Close Window ] Contact: Jessica

Hutchings, Jeffrey A.

315

Close this window print this page MATSUSHITA BATTERY DEVELOPS NEW MICRO FUEL CELL  

E-Print Network [OSTI]

to miniaturize the system, improve the reliability and reduce the cost. Notes and Technology Details 1. Fuel cellClose this window print this page MATSUSHITA BATTERY DEVELOPS NEW MICRO FUEL CELL TECHNOLOGY for fuel cells powering portable devices that makes it possible to reduce the size of the fuel cell to one

316

Citations and renewal: A window into public and private patent value  

E-Print Network [OSTI]

1 DRAFT Citations and renewal: A window into public and private patent value Alan C. Marco Deputy Chief Economist US Patent and Trademark Office1 24 February 2012 Abstract Using historical information on patent citations and patent maintenance in the US, I investigate the informational content provided

Sekhon, Jasjeet S.

317

THz detection of small molecule vapors in the atmospheric transmission windows  

E-Print Network [OSTI]

transmission windows. We investigate two types of apparatus. In the first type the THz beam propagates along is controlled to simulate dry or humid conditions. In the second apparatus the THz beam propagates over a much brightness temperature spectra at near-millimeter and submillimeter wavelengths with a Fourier-transform

Oklahoma State University

318

THERM 5.2 / WINDOW 5.2 NFRC Simulation Manual  

E-Print Network [OSTI]

of California. Ernest Orlando Lawrence Berkeley National Laboratory is an equal opportunity employer. #12;LBNLTHERM 5.2 / WINDOW 5.2 NFRC Simulation Manual Lawrence Berkeley National Laboratory JULY 2006 #12 Division Lawrence Berkeley National Laboratory Berkeley, California 94720 http

319

Occupant Response to Window Control Signaling Systems; Appendix C: Mixed-mode Signal Case Study Summary  

E-Print Network [OSTI]

preventing energy waste during the red light mode is a moregreen lights was installed to help avoid energy waste, or inlight means that energy is being used to modify the temparature inside and therefore if I open my window it will waste energy.

Ackerly, Katie; Brager, Gail

2011-01-01T23:59:59.000Z

320

Integrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks  

E-Print Network [OSTI]

by connecting many light-weight personal devices such as PDAs, mobile phones, and media players. UWB (Ultra WideIntegrated Scheduling Using Rendezvous Window and Sniff Mode for Wireless Personal Area Networks and in a piconet level as well as power saving, which is desired for wireless personal area network systems. 1

Lee, Tae-Jin

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

An empirical study of a full-scale polymer thermochromic window and its implications  

E-Print Network [OSTI]

on material science development objectives Eleanor S. Lee Lawrence Berkeley National Laboratory Xiufeng Pang window and its implications on material science development objectives Eleanor S.Lee* Abstract , Xiufeng Pang, Sabine Hoffmann, C. Howdy Goudey, Anothai Thanachareonkit Building Technology and Urban Systems

322

ENERGY EFFICIENT BUILDINGS PROGRAM. CHAPTER FROM ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1978  

E-Print Network [OSTI]

Coating Cut, Package Window Film Dealers Associatjon 80100Wi ndow Prototypes FILM Window configurations incorporatingfilms directly on glass, We are also examining various window

Sonderegger, R. C.

2011-01-01T23:59:59.000Z

323

Computing environment logbook  

DOE Patents [OSTI]

A computing environment logbook logs events occurring within a computing environment. The events are displayed as a history of past events within the logbook of the computing environment. The logbook provides search functionality to search through the history of past events to find one or more selected past events, and further, enables an undo of the one or more selected past events.

Osbourn, Gordon C; Bouchard, Ann M

2012-09-18T23:59:59.000Z

324

Environment and Climate Change  

E-Print Network [OSTI]

Migration, Environment and Climate Change: ASSESSING THE EVIDENCE #12;The opinions expressed;Migration, Environment and Climate Change: ASSESSING THE EVIDENCE Edited by Frank Laczko and Christine with with the financial support of #12;3 Migration, Environment and Climate Change: Assessing the Evidence Contents

Galles, David

325

A New Optically Reflective Thin Layer Electrode (ORTLE) Window: Gold on a Thin Porous Alumina Film Used to Observe the  

E-Print Network [OSTI]

the electrode face and a window behind it. The electrode is created by thin-film deposition of gold ontoFull Paper A New Optically Reflective Thin Layer Electrode (ORTLE) Window: Gold on a Thin Porous Alumina Film Used to Observe the Onset of Water Reduction Paul G. Miney, Maria V. Schiza, Michael L

Myrick, Michael Lenn

326

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored  

E-Print Network [OSTI]

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored auras. Red is high usage while green is low usage. HomeWindow: An Augmented Reality Domestic that reflects its current and historical energy use. Categories and Subject Descriptors H.5.2 [Information

Greenberg, Saul

327

OPTIMIZATION OF GaN WINDOW LAYER FOR InGaN SOLAR CELLS USING POLARIZATION EFFECT  

E-Print Network [OSTI]

on the design of wide-band gap GaN window layers for InGaN solar cells. Window layers serve to passivate the top into account during design of the solar cell to improve its collection efficiency. Previously, we have. The present work is a subset of the design optimization process for such solar cells, where we focus

Honsberg, Christiana

328

Where are Functions in PRISM 11.5.10? File Edit View Folder Tools Inquire Window Help  

E-Print Network [OSTI]

Where are Functions in PRISM 11.5.10? File Edit View Folder Tools Inquire Window Help New Help Desk ­ 412624help Switch Responsibility #12; Undo Typing Show Navigator New Acceptances View Lines Cascade Window Help Open Cut Zoom Open

Sibille, Etienne

329

Method and apparatus for removing and preventing window deposition during photochemical vapor deposition (photo-CVD) processes  

DOE Patents [OSTI]

Unwanted build-up of the film deposited on the transparent light-transmitting window of a photochemical vacuum deposition (photo-CVD) chamber is eliminated by flowing an etchant into the part of the photolysis region in the chamber immediately adjacent the window and remote from the substrate and from the process gas inlet. The respective flows of the etchant and the process gas are balanced to confine the etchant reaction to the part of the photolysis region proximate to the window and remote from the substrate. The etchant is preferably one that etches film deposit on the window, does not etch or affect the window itself, and does not produce reaction by-products that are deleterious to either the desired film deposited on the substrate or to the photolysis reaction adjacent the substrate. 3 figs.

Tsuo, S.; Langford, A.A.

1989-03-28T23:59:59.000Z

330

Method and apparatus for removing and preventing window deposition during photochemical vapor deposition (photo-CVD) processes  

DOE Patents [OSTI]

Unwanted build-up of the film deposited on the transparent light-transmitting window of a photochemical vacuum deposition (photo-CVD) chamber is eliminated by flowing an etchant into the part of the photolysis region in the chamber immediately adjacent the window and remote from the substrate and from the process gas inlet. The respective flows of the etchant and the process gas are balanced to confine the etchant reaction to the part of the photolysis region proximate to the window and remote from the substrate. The etchant is preferably one that etches film deposit on the window, does not etch or affect the window itself, and does not produce reaction by-products that are deleterious to either the desired film deposited on the substrate or to the photolysis reaction adjacent the substrate.

Tsuo, Simon (Lakewood, CO); Langford, Alison A. (Boulder, CO)

1989-01-01T23:59:59.000Z

331

The MacNuclide nuclear data environment  

SciTech Connect (OSTI)

Advance in technology have produced intriguing tools that can be applied to problems in nuclear science. Information management in nuclear science is an example of how technology is not quickly exploited. The U.S. Department of Energy supports an extensive program to evaluate published nuclear properties and store them in an electronic data base. Much of the evaluation effort has focused on producing the journal Nuclear Data Sheets and the publication Table of Isotopes. Although the electronic data base can itself be a valuable source of information, the software used to access is was designed using decades-old technologies. The authors of this paper have developed a novel data-base management system for nuclear properties. The application is known as MacNuclide. It is a nuclear data-base environment that uses the highly interactive and intuitive windowing environmentsof desk-top computers. The environment is designed around that image of the chart of nuclides. Questions are posed to the data base by placing constraints on properties and defining collections of nuclides to be used in data-base seraches. Results are displayed either as a simple list of nuclides that meet the imposed constraints or as a color chart of nuclides.

Stone, C.A. (San Jose State Univ., CA (United States))

1992-01-01T23:59:59.000Z

332

Energy/Environment/Commissioning  

E-Print Network [OSTI]

//NESTECNESTEC Nobuo NakaharaNobuo Nakahara ICEBO/APCBCAsia Pacific Conference on Building Commissioning 2006.11.7 Opening AddressOpening AddressEnergy/Environment/CommissioningEnergy/Environment/Commissioning Call for Call... Commissioning PrincipleCommissioning Principle Evaluation PrincipleEvaluation Principle How Building & Urban Energy System How Building & Urban Energy System shall be completed and maintained?shall be completed and maintained? Mechanism of Urban Environment...

Nakahara, N.

2006-01-01T23:59:59.000Z

333

Widening the Axion Window via Kinetic and St\\"uckelberg Mixings  

E-Print Network [OSTI]

We point out that kinetic and St\\"uckelberg mixings that are generically present in the low energy effective action of axions can significantly widen the window of axion decay constants. We show that an effective super-Planckian decay constant can be obtained even when the axion kinetic matrix has only sub-Planckian entries. Our minimal model involves only two axions, a St\\"uckelberg U(1) and a modest rank instanton generating non-Abelian group. Below the mass of the St\\"uckelberg U(1), there is only a single axion with a non-perturbatively generated potential. In contrast to previous approaches, the enhancement of the axion decay constant is not tied to the number of degrees of freedom introduced. We also discuss how kinetic mixings can lower the decay constant to the desired axion dark matter window. String theory embeddings of this scenario and their phenomenological features are briefly discussed.

Shiu, Gary; Ye, Fang

2015-01-01T23:59:59.000Z

334

THE PLASMA WINDOW: A WINDOWLESS HIGH PRESSURE VACUUM INTERFACE FOR VARIOUS ACCELERATOR APPLICATIONS.  

SciTech Connect (OSTI)

The Plasma Window is a stabilized plasma arc used as an interface between accelerator vacuum and pressurized targets. There is no solid material introduced into the beam and thus it is also capable of transmitting particle beams and electromagnetic radiation with low loss and of sustaining high beam currents without damage. Measurements on a prototype system with a 3 mm diameter opening have shown that pressure differences of more than 2.5 atmospheres can be sustained with an input pressure of {approx} 10{sup -6} Torr. The system is capable of scaling to higher-pressure differences and larger apertures. Various plasma window applications for synchrotron light sources, high power lasers, internal targets, high current accelerators such as the HAWK, ATW, APT, DARHT, spallation sources, as well as for a number of commercial applications, will be discussed.

HERSHCOVITCH,A.I.; JOHNSON,E.D.; LANZA,R.C.

1999-03-29T23:59:59.000Z

335

Foreground Removal vs. Foreground Avoidance: Contamination of the EoR Window  

E-Print Network [OSTI]

The removal of the Galactic and extragalactic foregrounds remains a major challenge for those wishing to make a detection of the Epoch of Reionization 21-cm signal. Multiple methods of modelling these foregrounds with varying levels of assumption have been trialled and shown promising recoveries on simulated data. Recently however there has been increased discussion of using the expected shape of the foregrounds in Fourier space to define an EoR window free of foreground contamination. By carrying out analysis within this window only, one can avoid the foregrounds and any statistical bias they might introduce. In this paper we discuss the advantages and disadvantages of both foreground removal and foreground avoidance. We create a series of simulations with noise levels in line with both current and future experiments and compare the recovered statistical cosmological signal from both methods. We also relax the assumption that the foregrounds are smooth by introducing a Gaussian random factor along the line-o...

Chapman, Emma; Abdalla, Filipe

2014-01-01T23:59:59.000Z

336

Renewable Electric Plant Information System user interface manual: Paradox 7 Runtime for Windows  

SciTech Connect (OSTI)

The Renewable Electric Plant Information System (REPiS) is a comprehensive database with detailed information on grid-connected renewable electric plants in the US. The current version, REPiS3 beta, was developed in Paradox for Windows. The user interface (UI) was developed to facilitate easy access to information in the database, without the need to have, or know how to use, Paradox for Windows. The UI is designed to provide quick responses to commonly requested sorts of the database. A quick perusal of this manual will familiarize one with the functions of the UI and will make use of the system easier. There are six parts to this manual: (1) Quick Start: Instructions for Users Familiar with Database Applications; (2) Getting Started: The Installation Process; (3) Choosing the Appropriate Report; (4) Using the User Interface; (5) Troubleshooting; (6) Appendices A and B.

NONE

1996-11-01T23:59:59.000Z

337

Analysis of tritium extraction from liquid lithium by permeation window and solid gettering processes  

SciTech Connect (OSTI)

Tritium recovery from liquid lithium at low concentration is an important problem for liquid metal breeder-blanket in a fusion reactor. Previous studies have identified tritium recovery methods including molten salt extraction, gettering recovery, permeation window, and vacuum distillation. In this paper, the authors focus on the numerical studies on tritium extraction by permeation window and gettering processes. These studies include for example: dynamic tritium concentration variation along the flow direction, tritium inventory distributions in the permeator and getter bed, along with the effect of dispersion on extraction efficiency. Using a model description makes it possible to determine functional dependence and provide insight into the interrelationships of the various operating conditions and material properties which may affect the behavior of tritium in the material. Clearly, reliable material properties (such as diffusivity, solubility, etc.) are essential for realistic evaluations.

Takeda, T. [Japan Atomic Energy Research Inst., Ibaraki-ken (Japan); Ying, A.Y.; Abdou, M.A. [Univ. of California, Los Angeles, CA (United States)

1994-12-31T23:59:59.000Z

338

Climate Change, Drought & Environment  

Broader source: Energy.gov [DOE]

Afternoon Plenary Session: Current Trends in the Advanced Bioindustry Climate Change, Drought, and EnvironmentMichael Champ, Executive Director, The Sustainable Water Challenge

339

1: 62-950829-LANL-GWurden-01, TPX Windows Study, M. Merrigan and G. Wurden LA-UR-95-3237  

E-Print Network [OSTI]

. A. Wurden ABSTRACT We detail the study of diagnostic windows and window thermal stress remediation performed--the windows will have to be changed if they blacken, anyway.). · Consideration of remediation loads approaching steady state. The long-pulse operation will produce 6?1021 neutrons/yr, requiring

340

Identifying and Resolving Issues in EnergyPlus and DOE-2 Window Heat Transfer Calculations  

SciTech Connect (OSTI)

Issues in building energy software accuracy are often identified by comparative, analytical, and empirical testing as delineated in the BESTEST methodology. As described in this report, window-related discrepancies in heating energy predictions were identified through comparative testing of EnergyPlus and DOE-2. Multiple causes for discrepancies were identified, and software fixes are recommended to better align the models with the intended algorithms and underlying test data.

Booten, C.; Kruis, N.; Christensen, C.

2012-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed  

SciTech Connect (OSTI)

Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-towall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare probability and other metrics used to evaluate visual discomfort. The window film was found to result in perceptible levels of discomfort glare on clear sunny days from the most conservative view point in the rear of the room looking toward the window. Daylight illuminance levels at the rear of the room were significantly increased above the reference window condition, which was defined as the same glazed clerestory window but with an interior Venetian blind (slat angle set to the cut-off angle), for the equinox to winter solstice period on clear sunny days. For partly cloudy and overcast sky conditions, daylight levels were improved slightly. To reduce glare, the daylighting film was coupled with a diffusing film in an insulating glazing unit. The diffusing film retained the directionality of the redirected light spreading it within a small range of outgoing angles. This solution was found to reduce glare to imperceptible levels while retaining for the most part the illuminance levels achieved solely by the daylighting film.

Thanachareonkit, Anothai; Lee, Eleanor S.; McNeil, Andrew

2013-08-31T23:59:59.000Z

342

Dye laser amplifier including an improved window configuration for its dye beam  

DOE Patents [OSTI]

A dye laser amplifier in which a continuously replenished supply of dye is excited with a first light beam in order to amplify the intensity of a second different light beam passing therethrough is disclosed herein. This amplifier includes a cell though which a continuous stream of the dye is caused to pass, and means for directing the first beam into the cell while the second beam is directed into and through the same cell. There is also disclosed herein a specific improvement to this amplifier which resides in the use of a pair of particularly configured windows through which the second beam passes along fixed paths as the second beam enters and exits the dye cell. Each of these windows has a relatively thick main section which is substantially larger in dimensions transverse to its beam path than the cross section of the second beam itself, whereby to add structural integrity to the overall window. At the same time, the latter includes a second section which is disposed entirely within the confines of the main section and through which the second beam is intended to pass in its entirety. This second section is made substantially thinner than the main section in order to reduce optical distortion as the second beam passes therethrough.

O'Neil, Richard W. (Pleasanton, CA); Davin, James M. (Livermore, CA)

1992-01-01T23:59:59.000Z

343

Dye laser amplifier including an improved window configuration for its dye beam  

DOE Patents [OSTI]

A dye laser amplifier in which a continuously replenished supply of dye is excited with a first light beam in order to amplify the intensity of a second different light beam passing therethrough is disclosed herein. This amplifier includes a cell though which a continuous stream of the dye is caused to pass, and means for directing the first beam into the cell while the second beam is directed into and through the same cell. There is also disclosed herein a specific improvement to this amplifier which resides in the use of a pair of particularly configured windows through which the second beam passes along fixed paths as the second beam enters and exits the dye cell. Each of these windows has a relatively thick main section which is substantially larger in dimensions transverse to its beam path than the cross section of the second beam itself, whereby to add structural integrity to the overall window. At the same time, the latter includes a second section which is disposed entirely within the confines of the main section and through which the second beam is intended to pass in its entirety. This second section is made substantially thinner than the main section in order to reduce optical distortion as the second beam passes therethrough. 4 figs.

O'Neil, R.W.; Davin, J.M.

1992-12-01T23:59:59.000Z

344

Enhancing Composition Window of Bicontinuous Structures by Designed Polydispersity Distribution of ABA Triblock Copolymers  

E-Print Network [OSTI]

The phase behavior of polydisperse ABA triblock copolymers is studied using dissipative particle dynamics simulations, focusing on the emergence and property of bicontinuous structures. Bicontinuous structures are characterized by two separate, intermeshed nanoscopic domains extending throughout the material. The connectivity of polymeric bicontinuous structures makes them highly desirable for many applications. For conventional monodisperse diblock and triblock copolymers, regular bicontinuous structures (i.e., gyroid and Fddd) can be formed over a narrow composition window of ~3%. We demonstrate that the composition window for the formation of bicontinuous structures can be regulated by designed polydispersity distributions of ABA triblock copolymers. In particular, introducing polydispersity in both A and B blocks can lead to a significant enhancement of the composition window of bicontinuous structures with both continuous A and B domains. The mechanism of the bicontinuous structure enhancement is elucidated from the distribution of the long and short blocks. Furthermore, it is shown that the polymeric bicontinuous structures from polydisperse ABA triblock copolymers possess good continuity throughout the sample, making them ideal candidates for advanced applications.

Yue Li; Hu-Jun Qian; Zhong-Yuan Lu; An-Chang Shi

2013-10-22T23:59:59.000Z

345

Characterization of an explosively bonded aluminum proton beam window for the Spallation Neutron Source  

SciTech Connect (OSTI)

An effort is underway at the Spallation Neutron Source (SNS) to change the design of the 1st Generation high-nickel alloy proton beam window (PBW) to one that utilizes aluminum for the window material. One of the key challenges to implementation of an aluminum PBW at the SNS was selection of an appropriate joining method to bond an aluminum window to the stainless steel bulk shielding of the PBW assembly. An explosively formed bond was selected as the most promising joining method for the aluminum PBW design. A testing campaign was conducted to evaluate the strength and efficacy of explosively formed bonds that were produced using two different interlayer materials: niobium and titanium. The characterization methods reported here include tensile testing, thermal-shock leak testing, optical microscopy, and advanced scanning electron microscopy. All tensile specimens examined failed in the aluminum interlayer and measured tensile strengths were all slightly greater than the native properties of the aluminum interlayer, while elongation values were all slightly lower. A leak developed in the test vessel with a niobium interlayer joint after repeated thermal-shock cycles, and was attributed to an extensive crack network that formed in a layer of niobium-rich intermetallics located on the bond interfaces of the niobium interlayer; the test vessel with a titanium interlayer did not develop a leak under the conditions tested. Due to the experience gained from these characterizations, the explosively formed bond with a titanium interlayer was selected for the aluminum PBW design at the SNS.

McClintock, David A [ORNL] [ORNL; Janney, Jim G [ORNL] [ORNL; Parish, Chad M [ORNL] [ORNL

2014-01-01T23:59:59.000Z

346

Microsoft Word - Tribal Call Jan 17 Summary 1-25-07 wep  

Broader source: Energy.gov (indexed) [DOE]

of Acoma), Wilda Portner (Science Applications International Corporation, SAIC), Kelly Schott (Sac & Fox Tribe), Curtis Seymour (Sac & Fox Tribe), Bill Spurgeon (DOEOffice...

347

Microsoft Word - Tribal Call Jan 17 Summary 1-25-07 wep  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAXBalanced Scorecard Federal ComplianceFORCONFLICTSTechnicalFriday, DecemberJanuary

348

Forests and historic environment  

E-Print Network [OSTI]

Forests and historic environment UK Forestry Standard Guidelines #12;Key to symbols UKFS Reference number #12;Forests and historic environment Forestry Commission: Edinburgh UK Forestry Standard in any format or medium, under the terms of the Open Government Licence. To view this licence, visit: www

349

environment and agriculture  

E-Print Network [OSTI]

environment and agriculture environmentagriculture.curtin.edu.au Bachelor of Science - majorS in agriculture, environmental Biology or coaStal Zone management Science and engineering #12;t he department of environment and agriculture caters for students who are passionate about agriculture, biology, conserving

350

Chiral angle dependence of resonance window widths in (2n+m) families of single-walled carbon nanotubes  

E-Print Network [OSTI]

Raman spectra of isolated single-walled carbon nanotubes (SWNTs) were obtained for a wide range of laser excitation energies to study the resonance excitation window of the radial breathing mode feature for members of ...

Hsieh, Ya-Ping

351

Design and prototype of a partial window replacement to improve the energy efficiency of 90-year-old MIT buildings  

E-Print Network [OSTI]

The existing windows of the 90-year-old buildings on the main MIT campus are not energy efficient and compromise comfort levels. The single panes of glass allow too much heat transfer and solar heat gain. In addition, the ...

Chen, YunJa

2007-01-01T23:59:59.000Z

352

Through a window, brightly : modulating daylight and solar radiation in commercial and institutional buildings through the use of architectural elements  

E-Print Network [OSTI]

Natural lighting serves several important functions in buildings. The visual power of a shaft of sunlight penetrating a dark space or the visual beauty of a stained window has long been recognized by architects and designers. ...

Schlereth, Hans-Joachim

1982-01-01T23:59:59.000Z

353

ENERGY & ENVIRONMENT DIVISION. ANNUAL REPORT FY 1980  

E-Print Network [OSTI]

well-insulated thermal envelope (exterior walls, windows,testing project is the Envelope Thermal Test Unit (ETTU). >DOE Conf. on Thermal Performance of Exterior Envelopes of

Authors, Various

2010-01-01T23:59:59.000Z

354

ENERGY & ENVIRONMENT DIVISION ANNUAL REPORT 1979  

E-Print Network [OSTI]

such as passive solar design and redistribution of windows,Group. All of these passive solar design activities havean LBL subcontractor of a passive solar design workbook for

Cairns, E.J.

2010-01-01T23:59:59.000Z

355

Design of the commissioning filter/mask/window assembly for undulator beamline front ends at the Advanced Photon Source  

SciTech Connect (OSTI)

A compact filter/mask/window assembly has been designed for undulator beamline commissioning activity at the Advanced Photon Source beamlines. The assembly consists of one 300-{mu}m graphite filter, one 127-{mu}m CVD diamond filter and two 250-{mu}m beryllium windows. A water-cooled Glidcop fixed mask with a 4.5-mm {times} 4.5-mm output optical aperture and a 0.96-mrad {times} 1.6-mrad beam missteering acceptance is a major part in the assembly. The CVD diamond filter which is mounted on the downstream side of the fixed mask is designed to also function as a transmitting x-ray beam position monitor. The sum signal from the latter can be used to monitor the physical condition of the graphite filter and prevent any possible chain reaction damage to the beryllium windows downstream. In this paper, the design concept as well as the detailed structural design of the commissioning window are presented. Further applications of the commissioning window commissioning window components are also discussed.

Shu, D.; Kuzay, T.M.

1995-10-20T23:59:59.000Z

356

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning  

E-Print Network [OSTI]

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning Beloningsbaserad Inlarning #12;Defining the Problem Known Environment Unknown Environment Improvements 1 Defining the Problem Framework Role of Reward Simplifying Assumptions Central Concepts 2 Known Environment Bellman

Kjellstrm, Hedvig

357

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning  

E-Print Network [OSTI]

Defining the Problem Known Environment Unknown Environment Improvements Reinforcement Learning Beloningsbaserad Inlarning #12;Defining the Problem Known Environment Unknown Environment Improvements 1 Defining the Problem Framework Role of Reward Simplifying Assumptions Central Concepts 2 Known Environment Bellmans

Kjellstrm, Hedvig

358

PCs in Business Environment  

E-Print Network [OSTI]

"PCs in Business Environment" is a project that contains two parts. First part is a real life application developed for Nordic Meat Inc. a small food - manufacturer in the KC area, developed in MS Excel 5.0 spreadsheet ...

Colak, Mijo Todor

1994-07-29T23:59:59.000Z

359

INTERNATIONAL ENERGY AND ENVIRONMENT  

E-Print Network [OSTI]

in a heat pump cooling system, thereby alleviating peak electricity consumption and associated emissions substituting for banned fluorocarbon refrigerants, coping with carbon costing and reducing water consumptionINTERNATIONAL ENERGY AND ENVIRONMENT FOUNDATION Computational Fluid Dynamics Modeling

360

Environment induced incoherent controllability  

E-Print Network [OSTI]

We prove that the environment induced entanglement between two non interacting, two-dimensional quantum systems S and P can be used to control the dynamics of S by means of the initial state of P. Using a simple, exactly solvable model, we show that both accessibility and controllability of S can be achieved under suitable conditions on the interaction of S and P with the environment.

Raffaele Romano; Domenico D'Alessandro

2005-11-08T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Polymers in disordered environments  

E-Print Network [OSTI]

A brief review of our recent studies aiming at a better understanding of the scaling behaviour of polymers in disordered environments is given. The main emphasis is on a simple generic model where the polymers are represented by (interacting) self-avoiding walks and the disordered environment by critical percolation clusters. The scaling behaviour of the number of conformations and their average spatial extent as a function of the number of monomers and the associated critical exponents $\\gamma$ and $\

V. Blavatska; N. Fricke; W. Janke

2014-11-18T23:59:59.000Z

362

Hotspots, Jets and Environments  

E-Print Network [OSTI]

I discuss the nature of `hotspots' and `jet knots' in the kpc-scale structures of powerful radio galaxies and their relationship to jet-environment interactions. I describe evidence for interaction between the jets of FRI sources and their local environments, and discuss its relationship to particle acceleration, but the main focus of the paper is the hotspots of FRIIs and on new observational evidence on the nature of the particle acceleration associated with them.

M. J. Hardcastle

2007-07-12T23:59:59.000Z

363

Demonstration with Energy and Daylighting Assessment of Sunlight Responsive Thermochromic (SRT) Window Systems  

SciTech Connect (OSTI)

Pleotint, LLC was able to successfully extrude thermochromic interlayer for use in the fenestration industry. Pleotint has developed a thermochromic sytem that requires two thermochromic colors to make a neutral color when in the tinted state. These two colors were assembled into a single interlayer called a tri-layer prelam by Crown Operations for use in the glass lamination industry. Various locations, orientations, and constructions of thermochromic windows were studied with funds from this contract. Locations included Australia, California, Costa Rica, Indiana, Iowa, Mexico. Installed orientations included vertical and skylight glazing applications. Various constructions included monolithic, double pane, triple pane constructions. A daylighting study was conducted at LinEl Signature. LinEl Signature has a conference room with a sylight roof system that has a west orientation. The existing LinEl Signature conference room had constant tint 40% VLT transparent skylights. Irradiance meters were installed on the interior and exterior sides of a constant tint skylight. After a month and a half of data collection, the irradiance meters were removed and the constant tint skylights were replaced with Pleotint thermochromic skylight windows. The irradiance meters were reinstalled in the same locations and irradiance data was collected. Both data sets were compared. The data showed that there was a linear relationship with exterior and interior irradiance for the existing constant tint skylights. The thermochromic skylights have a non-linear relationship. The thermochromic skylights were able to limit the amount of irradiance that passed through the thermochromic skylight. A second study of the LinEl Signature conference was performed using EnergyPlus to calculate the amount of Illuminance that passed through constant tint skylights as compared to thermochromic skylights. The constant tint skylights transmitted Illuminance is 2.8 times higher than the thermochromic skylights during the months of May, June, July, August and 1.9 times higher than the thermochromic skylight during the months of March, April, September, October. Calculated illuminance levels were much more consistent as compared to the existing constant tint skylights installed at LinEl Signature. This allows for a more comfortable interior space in regard to glare discomfort and interior lighting control. Lawrence Berkeley National Laboratory was contracted to characterize the performance of the thermochromic interlayer and thermochromic window systems. Thermochromic interlayer was characterized with spectrometer equipment. The thermochromic window systems were characterized using LBNLs Advanced Window Test Facility. A copy of the report can be found in the Appendix. Iowa State University was contracted to compare thermochromic window technology to constant tint technology. Iowa State University conducted the testing at the Energy Resource Station (ERS). The ERS has the ability to simultaneously test side-by-side competing building technologies. The building is equipped with two identical air handling units, each with its own dedicated and identical chiller. One air handling unit supplies the four test rooms designated as the A rooms and the other unit serves the four test rooms designated as the B rooms. There is one A test room and one B test rooms arranged as pairs in a side-by-side design with each pair having a different exposure. There is a pair of test rooms that face the south, an east and west facing pair. Each of the test rooms is a mirror image of its match with identical construction. The rooms are unoccupied; however, the capability to impose false loads on the rooms exists. The false loads and room lighting can be scheduled to simulate various usage patterns. A copy of the report can be found in the Appendix. GARD Analytics was contracted to compare EnergyPlus building simulations to the data recorded at the Iowa ERS. The goal of this research was to validate the building simulation software developed by the US Department of Energy. EnergyPlus is

Broekhuis, Michael; Liposcak, Curtis; Witte, Michael; Henninger, Robert; Zhou, Xiaohui; Petzen, George; Buchanan, Michael; Kumar, Sneh

2012-03-31T23:59:59.000Z

364

Property:OpenEI/UtilityRate/DemandWindow | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County,ContAddr2NumberOfPrograms JumpEnergyDemandWindow Jump to: navigation,

365

Lighting energy savings potential of split-pane electrochromic windows controlled for daylighting with visual comfort  

SciTech Connect (OSTI)

A simulation study was conducted to evaluate lighting energy savings of split-pane electrochromic (EC) windows controlled to satisfy key visual comfort parameters. Using the Radiance lighting simulation software, interior illuminance and luminance levels were computed for a south-facing private office illuminated by a window split into two independently-controlled EC panes. The transmittance of these was optimized hourly for a workplane illuminance target while meeting visual comfort constraints, using a least-squares algorithm with linear inequality constraints. Blinds were successively deployed until visual comfort criteria were satisfied. The energy performance of electrochromics proved to be highly dependent on how blinds were controlled. With hourly blind position adjustments, electrochromics showed significantly higher (62percent and 53percent, respectively without and with overhang) lighting energy consumption than clear glass. With a control algorithm designed to better approximate realistic manual control by an occupant, electrochromics achieved significant savings (48percent and 37percent, respectively without and with overhang). In all cases, energy consumption decreased when the workplace illuminance target was increased. In addition, the fraction of time during which the occupant had an unobstructed view of the outside was significantly greater with electrochromics: 10 months out of the year versus a handful of days for the reference case.

Software, Anyhere; Fernandes, Luis; Lee, Eleanor; Ward, Greg

2013-03-15T23:59:59.000Z

366

Exploration Of Activity Measurements And Equilibrium Checks For Sediment Dating Using Thick-Window Germanium Detectors  

SciTech Connect (OSTI)

Activity measurements on sediment samples for trapped-charge geological dating using gamma-ray spectroscopy are an important verification of the field-site dose rate determination. Furthermore gamma-ray spectroscopy can check if the natural decay series are in secular equilibrium which is a crucial assumption in such dating. Typically the activities of leading members of the Thorium and Uranium decay series are measured, which requires Germanium detectors with thin windows and good energy resolution in order to effectively detect the associated low energy gamma-rays. Such equipment is not always readily available. The potential of conventional Germanium detectors with thick entrance window has been explored towards routine gamma-ray spectroscopy of sediment samples using higher energy gamma-rays. Alternative isotopes, such as Ac-228 and Pb-212 for the Thorium series, and Pa-234m, Ra-226 and Bi-214 for the Uranium series, have been measured in order to determine the mass-specific activity for the respective series and possibly provide a check of secular equilibrium. In addition to measurements of the K-40 activity, with the alternative approach, the activities of both decay series can be accurately determined. The secular equilibrium condition may be tested for the Thorium series. Measurement accuracy for Pa-234m is, however, not sufficient to permit also a reliable check of equilibrium for the Uranium series.

Warner, Jacob A.; Gladkis, Laura G.; Timmers, Heiko [School of Physical, Environmental and Mathematical Sciences, University of New South Wales at the Australian Defence Force Academy, Canberra ACT 2602 (Australia); Fitzsimmons, Kathryn E. [Department of Human Evolution, Max Planck Institute for Evolutionary Anthropology, Deutscher Platz 6, D-04103 Leipzig (Germany); Reynolds, Eva M. [Research School of Earth Sciences, Australian National University, Canberra ACT 0200 (Australia)

2011-06-01T23:59:59.000Z

367

The Desert Environment January 26, 1999 1 The Desert Environment  

E-Print Network [OSTI]

The Desert Environment January 26, 1999 1 The Desert Environment Revised Paper Steven P. Reiss1@cs.brown.edu Abstract The Desert software engineering environment is a suite of tools developed to enhance pro- grammer virtual files on demand to address specific tasks. All this is done in an open and extensible environment

Reiss, Steven P.

368

Environment scattering in GADRAS.  

SciTech Connect (OSTI)

Radiation transport calculations were performed to compute the angular tallies for scattered gamma-rays as a function of distance, height, and environment. Green's Functions were then used to encapsulate the results a reusable transformation function. The calculations represent the transport of photons throughout scattering surfaces that surround sources and detectors, such as the ground and walls. Utilization of these calculations in GADRAS (Gamma Detector Response and Analysis Software) enables accurate computation of environmental scattering for a variety of environments and source configurations. This capability, which agrees well with numerous experimental benchmark measurements, is now deployed with GADRAS Version 18.2 as the basis for the computation of scattered radiation.

Thoreson, Gregory G.; Mitchell, Dean James; Theisen, Lisa Anne; Harding, Lee T.

2013-09-01T23:59:59.000Z

369

ENVIRONMENT 2006 Annual Report  

E-Print Network [OSTI]

ENVIRONMENT 2006 Annual Report IBM AND THE #12;Table of Contents Global Environmental Management and Management 13 International Performance Measures 13 Water Conservation 15 Climate Protection 16 on environmental protection in 1971. The policy is supported by a comprehensive global environmental management

370

Multiprocessor programming environment  

SciTech Connect (OSTI)

Programming tools and techniques have been well developed for traditional uniprocessor computer systems. The focus of this research project is on the development of a programming environment for a high speed real time heterogeneous multiprocessor system, with special emphasis on languages and compilers. The new tools and techniques will allow a smooth transition for programmers with experience only on single processor systems.

Smith, M.B.; Fornaro, R.

1988-12-01T23:59:59.000Z

371

COLLEGE OF ENGINEERING Environment  

E-Print Network [OSTI]

COLLEGE OF ENGINEERING Environment #12;Engineeringhas always been an essential element of society monitoring and true sustainability. As an undergraduate environmental engineering student, I've enjoyed and leadership while planning student events, serving on advisory boards, and working directly with the College

372

save energy, environment  

E-Print Network [OSTI]

was especially emphasized dur- ing the 1970s to combat the energy crisis caused by Arab oil embargoes. The recentsave energy, money, and the environment Windbreaks and shade trees #12;PrePared by Bryan R trees is based on their potential to save money from subsequent energy re- ductions. Winter heating

Boyer, Elizabeth W.

373

Sample Environment Plans and Progress  

E-Print Network [OSTI]

Sample Environment Plans and Progress at the SNS & HFIR SNS HFIR User Group Meeting American Conference on Neutron Scattering Ottawa, Canada June 26 30, 2010 Lou Santodonato Sample Environment Group our sample environment capabilities Feedback SHUG meetings User surveys Sample Environment Steering

Pennycook, Steve

374

DISTRIBUTED AND COLLABORATIVE SYNTHETIC ENVIRONMENTS  

E-Print Network [OSTI]

1 DISTRIBUTED AND COLLABORATIVE SYNTHETIC ENVIRONMENTS Chandrajit L. Bajaj and Fausto Bernardini with synthetic environments1,2,3,4,5,6 . A synthetic environment system is generally characterized and the synthetic environment generated by the computer. Several degrees of immersion are possible, ranging from

Texas at Austin, University of

375

Research Articles Holistic Programming Environments  

E-Print Network [OSTI]

Research Articles Holistic Programming Environments Gary Marsden a Harold Thimbleby b a Department a development environment. Of course, we can scoff at the distinction and say that a development environment to the development of programming environments and suggest ways in which this may be achieved. Keywords: Programming

Marsden, Gary

376

A very thin havar film vacuum window for heavy ions to perform radiobiology studies at the BNL Tandem  

SciTech Connect (OSTI)

Heavy ion beams from the BNL Tandem Van de Graaff accelerators will be made available for radiobiology studies on cell cultures. Beam energy losses need to be minimized both in the vacuum window and in the air in order to achieve the ranges required for the cells to be studied. This is particularly challenging for ions heavier than iron. The design is presented of a 0.4-inch diameter Havar film window that will satisfy these requirements. Films as thin as 80 microinches were successfully pressure tested. The final thickness to be used may be slightly larger to help in achieving pin hole free windows. We discuss design considerations and present pressure and vacuum test results as well as tests with heavy ion beams.

Thieberger, P.; Abendroth, H.; Alessi, J.; Cannizzo, L.; Carlson, C.; Gustavsson, A.; Minty, M.; Snydstrup, L.

2011-03-28T23:59:59.000Z

377

Excitation wavelength dependence of water-window line emissions from boron-nitride laser-produced plasmas  

SciTech Connect (OSTI)

We investigated the effects of laser excitation wavelength on water-window emission lines of laser-produced boron-nitride plasmas. Plasmas are produced by focusing 1064 nm and harmonically generated 532 and 266 nm radiation from a Nd:YAG laser on BN target in vacuum. Soft x-ray emission lines in the water-window region are recorded using a grazing-incidence spectrograph. Filtered photodiodes are used to obtain complementary data for water-window emission intensity and angular dependence. Spectral emission intensity changes in nitrogen Ly-{alpha} and He-{alpha} are used to show how laser wavelength affects emission. Our results show that the relative intensity of spectral lines is laser wavelength dependent, with the ratio of Ly-{alpha} to He-{alpha} emission intensity decreasing as laser wavelength is shortened. Filtered photodiode measurements of angular dependence showed that 266 and 532 nm laser wavelengths produce uniform emission.

Crank, M.; Harilal, S. S.; Hassan, S. M.; Hassanein, A. [Center for Materials Under Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)

2012-02-01T23:59:59.000Z

378

V-012: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code  

Broader source: Energy.gov [DOE]

PROBLEM: Mozilla Firefox 'window.location' Bugs Permit Cross-Site Scripting Attacks and May Let Remote Users Execute Arbitrary Code

379

Homeowner's Guide to Window Air Conditioner Installation for Efficiency and Comfort (Fact Sheet), Building America Case Study: Technology Solutions for Existing Homes, Building Technologies Office (BTO)  

SciTech Connect (OSTI)

This fact sheet offers a step-by-step guide to proper installation of window air conditioning units, in order to improve efficiency and comfort for homeowners.

Not Available

2013-06-01T23:59:59.000Z

380

A molecular dynamics investigation of the diffusion characteristics of cavity-type zeolites with 8-ring windows  

SciTech Connect (OSTI)

Molecular dynamics (MD) simulations are used to investigate the diffusion characteristics in DDR, CHA, LTA, ITQ-29, and TSC zeolites that have cavities separated by 8-member ring windows of dimensions in the 3.44.6 range. These zeolites have potential usage for separation of a variety of mixtures, such as CO{sub 2}/CH{sub 4}, CO{sub 2}/H{sub 2}, H{sub 2}/CH{sub 4}, and propane/propene, relying on a combination of adsorption and diffusion selectivities. The magnitude of self-diffusivities, D{sub i,self}, of the CH{sub 4} is found to have a direct correlation with the size of the window opening, increasing by about two orders of magnitude for a 0.5 increase in the window aperture. The diffusion selectivities of CO{sub 2}/CH{sub 4}, and H{sub 2}/CH{sub 4} mixtures were also found to have direct, and strong, correlation, with the window aperture. This opens up the possibility of tuning diffusion selectivities by appropriate choice of the framework structure. Framework flexibility dynamics have also been investigated with the aid of two published force fields for all-silica zeolites. Due to the lattice vibrations there is a distribution of window sizes that varies with time. The diffusivity of CH4 for a flexible lattice was found to correlate with aperture size of the time-averaged window, in precisely the same manner as for fixed framework lattices. This leads to the conclusion that lattice flexibility, per se, has no influence on the magnitude of the diffusivity or diffusion selectivity.

Krishna, Rajamani; van Baten, Jasper M.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

RELAP5-3D Developmental Assessment: Comparison of Version 4.2.1i on Linux and Windows  

SciTech Connect (OSTI)

Figures have been generated comparing the parameters used in the developmental assessment of the RELAP5-3D code, version 4.2i, compiled on Linux and Windows platforms. The figures, which are the same as those used in Volume III of the RELAP5-3D code manual, compare calculations using the semi-implicit solution scheme with available experiment data. These figures provide a quick, visual indication of how the code predictions differ between the Linux and Windows versions.

Paul D. Bayless

2014-06-01T23:59:59.000Z

382

'Water window' sources: Selection based on the interplay of spectral properties and multilayer reflection bandwidth  

SciTech Connect (OSTI)

Development of laser-produced plasma 'water window' sources poses a major challenge in x-ray research and most effort has focused on line sources for use with zone plate optics. Here, a comparison of carbon and nitrogen line emission with that from both 3d - 4f and 4d - 4f unresolved transition arrays shows that, at power densities available from 'table-top' solid-state lasers, 3d - 4f emission from zirconium plasmas is most intense, and calculations show that in an imaging system based on multilayer mirrors, for reflectance bandwidths >1% has superior performance than either line or broader-band sources. For bandwidths <1%, line sources are preferable.

Li, Bowen; Dunne, Padraig; O'Sullivan, Gerry [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland)] [School of Physics, University College Dublin, Belfield, Dublin 4 (Ireland); Higashiguchi, Takeshi; Otsuka, Takamitsu [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan)] [Department of Advanced Interdisciplinary Sciences, Center for Optical Research and Education (CORE), and Optical Technology Innovation Center (OpTIC), Utsunomiya University, Yoto 7-1-2, Utsunomiya, Tochigi 321-8585 (Japan); Jiang, Weihua [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 (Japan)] [Department of Electrical Engineering, Nagaoka University of Technology, Kami-tomiokamachi 1603-1, Nagaoka, Niigata 940-2188 (Japan); Endo, Akira [HiLASE Project, Institute of Physics AS, CR, Na Slovance 2, 18221 Prague 8 (Czech Republic)] [HiLASE Project, Institute of Physics AS, CR, Na Slovance 2, 18221 Prague 8 (Czech Republic)

2013-01-28T23:59:59.000Z

383

Development of High Rate Coating Technology for Low Cost Electrochromic Dynamic Windows  

SciTech Connect (OSTI)

Objectives of the Project: The objective of this project was to develop and demonstrate the feasibility of depositing critical electrochromic layers at high rate using new novel vacuum coating sources, to develop a full electrochromic process flow by combining conventional processes with new deposition sources, to characterize, test, evaluate, and optimize the resulting coatings and devices, and, to demonstrate an electrochromic device using the new process flow and sources. As addendum objectives, this project was to develop and demonstrate direct patterning methods with novel integration schemes. The long term objective, beyond this program, is to integrate these innovations to enable production of low-cost, high-performance electrochromic windows produced on highly reliable and high yielding manufacturing equipment and systems.

Kwak, B.; Joshi, Ajey

2013-03-31T23:59:59.000Z

384

Vacuum-barrier window for wide-bandwidth high-power microwave transmission  

DOE Patents [OSTI]

A vacuum output window comprises a planar dielectric material with identical systems of parallel ridges and valleys formed in opposite surfaces. The valleys in each surface neck together along parallel lines in the bulk of the dielectric. Liquid-coolant conduits are disposed linearly along such lines of necking and have water or even liquid nitrogen pumped through to remove heat. The dielectric material can be alumina, or its crystalline form, sapphire. The electric-field of a broadband incident megawatt millimeter-wave radio frequency energy is oriented perpendicular to the system of ridges and valleys. The ridges, about one wavelength tall and with a period of about one wavelength, focus the incident energy through in ribbons that squeeze between the liquid-coolant conduits without significant losses over very broad bands of the radio spectrum. In an alternative embodiment, the liquid-coolant conduits are encased in metal within the bulk of the dielectric.

Caplan, Malcolm (Fremont, CA); Shang, Clifford C. (Tracy, CA)

1996-01-01T23:59:59.000Z

385

Vacuum-barrier window for wide-bandwidth high-power microwave transmission  

DOE Patents [OSTI]

A vacuum output window comprises a planar dielectric material with identical systems of parallel ridges and valleys formed in opposite surfaces. The valleys in each surface neck together along parallel lines in the bulk of the dielectric. Liquid-coolant conduits are disposed linearly along such lines of necking and have water or even liquid nitrogen pumped through to remove heat. The dielectric material can be alumina, or its crystalline form, sapphire. The electric-field of a broadband incident megawatt millimeter-wave radio frequency energy is oriented perpendicular to the system of ridges and valleys. The ridges, about one wavelength tall and with a period of about one wavelength, focus the incident energy through in ribbons that squeeze between the liquid-coolant conduits without significant losses over very broad bands of the radio spectrum. In an alternative embodiment, the liquid-coolant conduits are encased in metal within the bulk of the dielectric. 4 figs.

Caplan, M.; Shang, C.C.

1996-08-20T23:59:59.000Z

386

Window-based method for approximating the Hausdorff in three-dimensional range imagery  

DOE Patents [OSTI]

One approach to pattern recognition is to use a template from a database of objects and match it to a probe image containing the unknown. Accordingly, the Hausdorff distance can be used to measure the similarity of two sets of points. In particular, the Hausdorff can measure the goodness of a match in the presence of occlusion, clutter, and noise. However, existing 3D algorithms for calculating the Hausdorff are computationally intensive, making them impractical for pattern recognition that requires scanning of large databases. The present invention is directed to a new method that can efficiently, in time and memory, compute the Hausdorff for 3D range imagery. The method uses a window-based approach.

Koch, Mark W. (Albuquerque, NM)

2009-06-02T23:59:59.000Z

387

Transparent, near-infrared organic photovoltaic solar cells for window and energy-scavenging applications  

SciTech Connect (OSTI)

We fabricate near-infrared absorbing organic photovoltaics that are highly transparent to visible light. By optimizing near-infrared optical-interference, we demonstrate power efficiencies of 1.30.1% with simultaneous average visible transmission of >65% . Subsequent incorporation of near-infrared distributed-Bragg-reflector mirrors leads to an increase in the efficiency to 1.70.1% , approaching the 2.40.2% efficiency of the opaque cell, while maintaining high visible-transparency of >55% . Finally, we demonstrate that a series-integrated array of these transparent cells is capable of powering electronic devices under near-ambient lighting. This architecture suggests strategies for high-efficiency power-generating windows and highlights an application uniquely benefiting from excitonic electronics.

Lunt, Richard R; Bulovic, Vladimir

2011-01-01T23:59:59.000Z

388

Environment and Protostellar Evolution  

E-Print Network [OSTI]

Even today in our Galaxy, stars form from gas cores in a variety of environments, which may affect the properties of resulting star and planetary systems. Here we study the role of pressure, parameterized via ambient clump mass surface density, on protostellar evolution and appearance, focussing on low-mass, Sun-like stars and considering a range of conditions from relatively low pressure filaments in Taurus, to intermediate pressures of cluster-forming clumps like the Orion Nebula Cluster (ONC), to very high pressures that may be found in the densest Infrared Dark Clouds (IRDCs) or in the Galactic Center (GC). We present unified analytic and numerical models for collapse of prestellar cores, accretion disks, protostellar evolution and bipolar outflows, coupled to radiative transfer (RT) calculations and a simple astrochemical model to predict CO gas phase abundances. Prestellar cores in high pressure environments are smaller and denser and thus collapse with higher accretion rates and efficiencies, resulting...

Zhang, Yichen

2014-01-01T23:59:59.000Z

389

Galaxy Evolution and Environment  

E-Print Network [OSTI]

The properties of galaxies are strongly correlated with their environment, with red galaxies dominating galaxy clusters and blue galaxies dominating the general field. However, not all field galaxies are young: studies of the colors, line strengths, and M/L ratios of massive early-type galaxies at 0environment. There is good evidence that the growth of these galaxies does continue longer in the field than in clusters, via (nearly) dissipationless mergers of already old galaxies. These results are consistent with predictions of recent galaxy formation models, which incorporate AGN feedback to suppress star formation in the most massive halos. Systematic studies of the relation of galaxies with their environment beyond z=1 are difficult, and still somewhat contradictory. Intriguingly both the DEEP2 and VVDS surveys find that the color-density relation disappears at z~1.3, unfortunately just at the point where both surveys become highly incomplete. On the other hand, clustering studies at z~2.5 have shown that red galaxies cluster more strongly than blue galaxies, implying that the color-density relation was already in place at that redshift.

Pieter van Dokkum; Ryan Quadri

2007-04-13T23:59:59.000Z

390

A Multi-Stage Very Large-Scale Neighborhood Search for the Vehicle Routing Problem with Soft Time-Windows  

E-Print Network [OSTI]

problem, where customer's time windows may be violated at a certain cost. The Vehicle Routing ProblemA Multi-Stage Very Large-Scale Neighborhood Search for the Vehicle Routing Problem with Soft Time of Computing Science and Engineering Place Sainte-Barbe 2, 1348 Louvain-la-Neuve, Belgium {Sebastien

Deville, Yves

391

Heuristic methods for vehicle routing problem with time windows K.C. Tana,*, L.H. Leeb  

E-Print Network [OSTI]

of the problem is to ®nd routes for the vehicles to serve all the customers at a minimal cost (in terms of travelHeuristic methods for vehicle routing problem with time windows K.C. Tana,*, L.H. Leeb , Q.L. Zhua , K. Oua a Department of Electrical and Computer Engineering, National University of Singapore, 10

Zhu, Kenny Q.

392

Getting Active Directory Up And Running Full commitment to Windows 2000 or XP means converting to Active  

E-Print Network [OSTI]

have gone all the way, but the numbers are growing. By David Norfolk Everybody now accepts Windows 2000 and XP as the future of Windows, but real acceptance ofActive Directory,the Directory Service at itscore,isfarlesscommon. You have two choices: to deploy Windows 2000 as a more scalable, and more manageable evolution of Windows NT and treat Active Directory simply as an evolutionof the Registry andSAM;or,to exploitthe Directory Servicefully.Anyconfiguration file or user-list can be considered as a directory but a full-function Directory is a specialised database with a set of functions similar to (but not necessarily the same as) those defined in the international X.500 standard (some directories, including Microsofts Active Directory, are not X.500 compliant) and is intended to support multi-application, distributed, enterprise-scale computer systems. Definition So what exactly is a full-function Directory Service? It is a database which provides

Directory Few Organisations

393

Rapid 3D Seismic Source Inversion Using Windows Azure and Amazon EC2 Vedaprakash Subramanian, Hongyi Ma,  

E-Print Network [OSTI]

Rapid 3D Seismic Source Inversion Using Windows Azure and Amazon EC2 Vedaprakash Subramanian seismic source inversion on both cluster (specif- ically, MPI-based) and cloud computing (specifically to seismic source in- version is feasible and has its advantages. In addition, we notice that both cluster

Wang, Liqiang

394

Design and RF measurements of a 5 GHz 500 kW window for the ITER LHCD system  

E-Print Network [OSTI]

CEA/IRFM is conducting R\\&D efforts in order to validate the critical RF components of the 5 GHz ITER LHCD system, which is expected to transmit 20 MW of RF power to the plasma. Two 5 GHz 500 kW BeO pill-box type window prototypes have been manufactured in 2012 by the PMB Company, in close collaboration with CEA/IRFM. Both windows have been validated at low power, showing good agreement between measured and modeling, with a return loss better than 32 dB and an insertion loss below 0.05 dB. This paper reports on the window RF design and the low power measurements. The high power tests up to 500kW have been carried out in March 2013 in collaboration with NFRI. Results of these tests are also reported. In the current ITER LHCD design, 20 MW Continuous Wave (CW) of Radio-Frequency power at 5 GHz are expected to be generated and transmitted to the plasma. In order to separate the vacuum vessel pressure from the cryostat waveguide pressure, forty eight 5 GHz 500kW CW windows are to be assembled on the waveguide...

Hillairet, Julien; Dechambre, N; Delpech, L; Ekedahl, A; Faure, N; Goniche, M; Kim, J; Larroque, S; Magne, R; Marfisi, L; Namkung, W; Park, H; Park, S; Poli, S; Vulliez, K

2015-01-01T23:59:59.000Z

395

Ecology and environment What ecology and environment course is  

E-Print Network [OSTI]

Ecology and environment Essentials What ecology and environment course is there? Ecology 01273 876787 Why ecology and environment at Sussex? · You will be taught by lecturers who are leaders in research, with a broad range of experience and expertise including plant, bird and insect ecology, climate

Sussex, University of

396

Application of a stochastic window use model in EnergyPlus  

E-Print Network [OSTI]

controls can be modeled in Modelica and then, using thecan be linked with the Modelica development environment (sdm/index.htm Wetter, M, 2009 Modelica-based Modeling and

2012-01-01T23:59:59.000Z

397

Painting in a sonic environment  

E-Print Network [OSTI]

The thesis explores how painting is affected by its sonic environment. The research stems from an artistic response to noise in the environment and how this can be explored through artistic practice. The boundaries of ...

Greated, Marianne

2014-06-27T23:59:59.000Z

398

Guest Editors' Introduction: Hostile Environments  

E-Print Network [OSTI]

Pervasive computing technology can save lives by both eliminating the need for humans to work in hostile environments and supporting them when they do. In general, environments that are hazardous to humans are hard on ...

Lukowicz, Paul

399

Environment Induced Time Arrow  

E-Print Network [OSTI]

The spread of the time arrows from the environment to an observed subsystem is followed within a harmonic model. A similarity is pointed out between irreversibility and a phase with spontaneously broken symmetry. The causal structure of interaction might be lost in the irreversible case, as well. The Closed Time Path formalism is developed for classical systems and shown to handle the time arrow problem in a clear and flexible manner. The quantum case is considered, as well, and the common origin of irreversibility and decoherence is pointed out.

Janos Polonyi

2012-06-25T23:59:59.000Z

400

Environment assisted electron capture  

E-Print Network [OSTI]

Electron capture by {\\it isolated} atoms and ions proceeds by photorecombination. In this process a species captures a free electron by emitting a photon which carries away the excess energy. It is shown here that in the presence of an {\\it environment} a competing non-radiative electron capture process can take place due to long range electron correlation. In this interatomic (intermolecular) process the excess energy is transferred to neighboring species. The asymptotic expression for the cross section of this process is derived. We demonstrate by explicit examples that under realizable conditions the cross section of this interatomic process can clearly dominate that of photorecombination.

Kirill Gokhberg; Lorenz S. Cederbaum

2009-11-09T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Environment Feature Stories  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area. TheEPSCI Home It isGas SeparationsRelevantEnvironment

402

School of Environment and Sustainability  

E-Print Network [OSTI]

School of Environment and Sustainability Room 323, Kirk Hall 117 Science Place Saskatoon, SK S7N 5C8 Telephone: (306) 966-1985 E-mail: sens.info@usask.ca Master of Environment and Sustainability (MES) Opportunity Sustainability Science in the Delta Dialogue Network The School of Environment and Sustainability

Saskatchewan, University of

403

Highly Insulating Windows with a U-value less than 0.6 W/m2K  

SciTech Connect (OSTI)

U.S. households rely primarily on three sources of energy: natural gas, electricity, and fuel oil. In the past several decades, electricity consumption by households has grown dramatically, and a significant portion of electricity used in homes is for lighting. Lighting includes both indoor and outdoor lighting and is found in virtually every household in the United States. In 2001, according to the US Energy Information Administration, lighting accounted for 101 billion kWh (8.8 percent) of U.S. household electricity use. Incandescent lamps, which are commonly found in households, are highly inefficient sources of light because about 90 percent of the energy used is lost as heat. For that reason, lighting has been one focus area to increase the efficiency of household electricity consumption. Windows have several functions, and one of the main functions is to provide a view to the outside. Daylighting is another one of windows main functions and determines the distribution of daylight to a space. Daylighting windows do not need to be transparent, and a translucent daylighting window is sufficient, and often desired, to diffuse the light and make the space more environmentally pleasing. In homes, skylights are one source of daylighting, but skylights are not very energy efficient and are inseparably linked to solar heat gain. In some climates, added solar heat gains from daylighting may be welcome; but in other climates, heat gain must be controlled. More energy efficient skylights and daylighting solutions, in general, are desired and can be designed by insulating them with aerogels. Aerogels are a highly insulating and transparent material in its pure form. The overall objective for this project was to prepare an economical, translucent, fiber-reinforced aerogel insulation material for daylighting applications that is durable for manufacturing purposes. This advanced insulation material will increase the thermal performance of daylighting windows, while satisfying constraints such as durability, cost, user acceptance, size limits, and environmental safety concerns. The energy efficient daylighting window will consist of a translucent and resilient aerogel panel sandwiched between glass panes in double glazed windows. Compared to the best windows available today, the double glazed translucent windows with 1/2-inch aerogel inserts will have a U-value of 1.2 W/m{sup 2} K (0.211 BTU/ft{sup 2} h F) without any coating or low conductivity fill gases. These windows will be more effective than the windows with an Energy Star rating of U-2 W/m{sup 2} K and could be made even more efficient by using low-e coated glass glazings and inert gas fills. This report summarizes the work accomplished on Cooperative Agreement DE-FC26-03NT41950. During this project, Aspen Aerogels made transparent and translucent aerogels from TMOS and TEOS. We characterized the transparency of the aerogels, reinforced the transparent aerogels with fibers and prepared large translucent aerogel panels and blankets. We also conducted an initial market study for energy efficient translucent windows. A lab-scale process was developed that could be scaled-up to manufacture blankets of these translucent aerogels. The large blankets prepared were used to fabricate prototype translucent windows and skylights. The primary goal of this project was to develop transparent, resilient, hydrophobic silica aerogels that have low thermal conductivities (R-10/inch) to be used to produce aerogel insulated double-glazing windows with a U value of 0.6 W/m{sup 2}K. To meet this objective we developed a process and equipment to produce blankets of translucent, hydrophobic aerogel. We focused on silica, organically-modified silica aerogels (Ormosils), and fiber reinforced silica aerogels due to the appreciable expertise in silica sol-gel processing available with the personnel at Aspen Aerogels, and also due to the quantity of knowledge available in the scientific literature. The project was conducted in three budget periods, herein called BP1, BP2 and BP3.

Wendell Rhine; Ying Tang; Wenting Dong; Roxana Trifu; Reduane Begag

2008-11-30T23:59:59.000Z

404

Solar Policy Environment: New Orleans  

Broader source: Energy.gov [DOE]

To use unprecedented rebuilding of the city of New Orleans is an opportunity for the Office of Recovery Management and its partners to encourage solar in New Orleans energy marketplace. While all Solar Cities grantees are undertaking market transformation activities that will both remove barriers to the adoption of solar technologies and reduce the cost of solar technologies, the reconstruction process affords New Orleans a window of opportunity to structurally alter the ways in which solar technologies are regulated, incentivized, produced, and consumed in the Greater New Orleans area.

405

Spatial, temporal, and hybrid decompositions for large-scale vehicle routing with time windows  

SciTech Connect (OSTI)

This paper studies the use of decomposition techniques to quickly find high-quality solutions to large-scale vehicle routing problems with time windows. It considers an adaptive decomposition scheme which iteratively decouples a routing problem based on the current solution. Earlier work considered vehicle-based decompositions that partitions the vehicles across the subproblems. The subproblems can then be optimized independently and merged easily. This paper argues that vehicle-based decompositions, although very effective on various problem classes also have limitations. In particular, they do not accommodate temporal decompositions and may produce spatial decompositions that are not focused enough. This paper then proposes customer-based decompositions which generalize vehicle-based decouplings and allows for focused spatial and temporal decompositions. Experimental results on class R2 of the extended Solomon benchmarks demonstrates the benefits of the customer-based adaptive decomposition scheme and its spatial, temporal, and hybrid instantiations. In particular, they show that customer-based decompositions bring significant benefits over large neighborhood search in contrast to vehicle-based decompositions.

Bent, Russell W [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

406

OPENING THE 21 cm EPOCH OF REIONIZATION WINDOW: MEASUREMENTS OF FOREGROUND ISOLATION WITH PAPER  

SciTech Connect (OSTI)

We present new observations with the Precision Array for Probing the Epoch of Reionization with the aim of measuring the properties of foreground emission for 21 cm epoch of reionization (EoR) experiments at 150 MHz. We focus on the footprint of the foregrounds in cosmological Fourier space to understand which modes of the 21 cm power spectrum will most likely be compromised by foreground emission. These observations confirm predictions that foregrounds can be isolated to a {sup w}edge{sup -}like region of two-dimensional (k , k{sub Parallel-To })-space, creating a window for cosmological studies at higher k{sub Parallel-To} values. We also find that the emission extends past the nominal edge of this wedge due to spectral structure in the foregrounds, with this feature most prominent on the shortest baselines. Finally, we filter the data to retain only this ''unsmooth'' emission and image its specific k{sub Parallel-To} modes. The resultant images show an excess of power at the lowest modes, but no emission can be clearly localized to any one region of the sky. This image is highly suggestive that the most problematic foregrounds for 21 cm EoR studies will not be easily identifiable bright sources, but rather an aggregate of fainter emission.

Pober, Jonathan C.; Parsons, Aaron R.; Ali, Zaki [Astronomy Department, U. California, Berkeley, CA (United States); Aguirre, James E.; Moore, David F. [Department of Physics and Astronomy, U. Pennsylvania, Philadelphia, PA (United States); Bradley, Richard F. [Department of Electrical and Computer Engineering, U. Virginia, Charlottesville, VA (United States); Carilli, Chris L. [National Radio Astronomy Observatory, Socorro, NM (United States); DeBoer, Dave; Dexter, Matthew; MacMahon, Dave [Radio Astronomy Laboratory, U. California, Berkeley, CA (United States); Gugliucci, Nicole E. [Department of Astronomy, U. Virginia, Charlottesville, VA (United States); Jacobs, Daniel C. [School of Earth and Space Exploration, Arizona State U., Tempe, AZ (United States); Klima, Patricia J. [National Radio Astronomy Observatory, Charlottesville, VA (United States); Manley, Jason; Walbrugh, William P. [Square Kilometer Array, South Africa Project, Cape Town (South Africa); Stefan, Irina I. [Cavendish Laboratory, Cambridge (United Kingdom)

2013-05-10T23:59:59.000Z

407

Opening the 21cm EoR Window: Measurements of Foreground Isolation with PAPER  

E-Print Network [OSTI]

We present new observations with the Precision Array for Probing the Epoch of Reionization (PAPER) with the aim of measuring the properties of foreground emission for 21cm Epoch of Reionization experiments at 150 MHz. We focus on the footprint of the foregrounds in cosmological Fourier space to understand which modes of the 21cm power spectrum will most likely be compromised by foreground emission. These observations confirm predictions that foregrounds can be isolated to a "wedge"-like region of 2D (k-perendicular, k-parallel)-space, creating a window for cosmological studies at higher k-parallel values. We also find that the emission extends past the nominal edge of this wedge due to inherent spectral structure in the foregrounds themselves, with this feature most prominent on the shortest baselines. Finally, we filter the data to retain only this "unsmooth" emission and image it. The resultant image shows an excess of power on large angular scales, but no emission can be clearly localized to any one region...

Pober, Jonathan C; Aguirre, James E; Ali, Zaki; Bradley, Richard F; Carilli, Chris L; DeBoer, Dave; Dexter, Matthew; Gugliucci, Nicole E; Jacobs, Daniel C; MacMahon, Dave; Manley, Jason; Moore, David F; Stefan, Irina I; Walbrugh, William P

2013-01-01T23:59:59.000Z

408

Neutrinos: an Open Window on Fundamental Physics and the Evolution of the Universe  

SciTech Connect (OSTI)

In the past ten years, a series of experiments has confirmed that neutrinos can oscillate between different types ('flavors') and have mass. These results are the first solid evidence for physics beyond the Standard Model of Particle Physics, with profound implications for the Universe and the laws that govern it. Thanks to a broad experimental program, including accelerator- and reactor-based experiments such as MINOS, MiniBooNE, T2K, Double-CHOOZ, Daya Bay, NOvA, LBNE, and searches for neutrinoless double beta decay, we have just entered the 'precision era' in neutrino physics. I will review the status of experimental results, their implications for our understanding of neutrino properties, and the questions that must be addressed. I will give an overview of the exciting experimental program that is underway and I will discuss how neutrino physics will help in opening a new window on the fundamental laws of Nature, its fundamental constituents, and the evolution of the Universe.

Pascoli, Silvia (IPPP, Durham University) [IPPP, Durham University

2010-08-18T23:59:59.000Z

409

Thin Metal Oxide Films to Modify a Window Layer in CdTe-Based Solar Cells for Improved Performance  

SciTech Connect (OSTI)

We report on CdS/CdTe photovoltaic devices that contain a thin Ta2O5 film deposited onto the CdS window layer by sputtering. We show that for thicknesses below 5 nm, Ta2O5 films between CdS and CdTe positively affect the solar cell performance, improving JSC, VOC, and the cell power conversion efficiency despite the insulating nature of the interlayer material. Using the Ta2O5 interlayer, a VOC gain of over 100 mV was demonstrated compared to a CdTe/CdS baseline. Application of a 1nm Ta2O5 interlayer enabled the fabrication of CdTe solar cells with extremely thin (less than 30 nm) CdS window layers. The efficiency of these cells exceeded that of a base line cell with 95 nm of CdS.

Lemmon, John P.; Polikarpov, Evgueni; Bennett, Wendy D.; Kovarik, Libor

2012-05-05T23:59:59.000Z

410

JOURNAL DE PHYSIQUE CoZZoque C9, suppZ6ment au noll, Tome 41, novembre 1980, page C9-423 EXPERIMENTAL STUDY OF A FREE-VORTEX AERODYNAMIC WINDOW  

E-Print Network [OSTI]

-423 EXPERIMENTAL STUDY OF A FREE-VORTEX AERODYNAMIC WINDOW W. Masuda and M. Yuasa Research Institute, Ishikawajima free-vortex aerodynamic window has been fabricated and tested. Aerodynamic performance studies show of solid materials, an aerodynamic window makes use of a nonabsorbing gas jet to permit the extraction

Paris-Sud XI, Université de

411

Numerical study of the effect of normalised window size, sampling frequency, and noise level on short time Fourier transform analysis  

SciTech Connect (OSTI)

Photonic Doppler velocimetry, also known as heterodyne velocimetry, is a widely used optical technique that requires the analysis of frequency modulated signals. This paper describes an investigation into the errors of short time Fourier transform analysis. The number of variables requiring investigation was reduced by means of an equivalence principle. Error predictions, as the number of cycles, samples per cycle, noise level, and window type were varied, are presented. The results were found to be in good agreement with analytical models.

Ota, T. A. [AWE, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom)] [AWE, Aldermaston, Reading, Berkshire RG7 4PR (United Kingdom)

2013-10-15T23:59:59.000Z

412

Use of Irrigation to Extend the Seeding Window for Final Reclamation at Yucca Mountain, Nevada  

SciTech Connect (OSTI)

The U.S. Department of Energy has implemented a program to investigate the feasibility of various techniques for reclaiming lands disturbed during site characterization at Yucca Mountain. As part of this program, two studies were conducted in 1997 to assess the effects of combinations of seeding date (date that seeds are planted) and supplemental irrigation on densities of native plant species at Yucca Mountain. Study objectives were to (1) determine whether the traditional seeding window (October-December) could be extended through combinations of seeding date and irrigation date, (2) determine which combination of seeding date and irrigation was most successful, and (3) assess the effects of irrigation versus natural precipitation on seedling establishment. In the first study, a multi-species seed mix of 16 native species was sown into plots on four dates (12/96, 2/97, 3/97, and 4/97). Irrigation treatments were control (no irrigation) or addition of 80 mm of supplemental water applied over a one month period. Plant densities were sampled in August and again in October, 1997. In the second study, Larrea tridentata and Lycium andersonii, two species that are common at Yucca Mountain, but difficult to establish from seed, were sown together into plots in January and August, 1997. Half the plots were irrigated with approximately 250 mm of water between August 18 and September 11, while the remaining plots received no irrigation (control). Plant densities were sampled in October, 1997. The August census for the multi-species mix study showed irrigated plots that were sown in February, March and April had higher plant densities and more species than plots that were not irrigated. Irrigation had no effect on plant densities on plots that were seeded in December. Plots were used again in October following 18 mm of precipitation in September. Densities of three species, Ambrosia dumosa, Hymenoclea salsola, and L. tridentata, (warm-season species) were lower on irrigated plots sown in December, February, and March, and showed no response to irrigation on plots sown in April. Therefore, early spring irrigation did not facilitate establishment of warm-season species. These results suggest that these species are dependent upon precipitation while temperatures are warm in late summer or fall. However, control plots that were seeded in December had acceptable densities of these species. A more practical approach might be to avoid irrigation costs by seeding in December and waiting for fall precipitation. The remaining species (cool-season species) showed an opposite response to supplemental water with greater densities on irrigated plots sown in February, March, and April, and no response to irrigation on plots sown in December. While these results show that irrigation can extend the seeding window for cool-season species should it be necessary, it was also apparent that if seeds are sown by late December, irrigation is not necessary to achieve acceptable plant densities.

TRW Environmental Safety

2000-08-01T23:59:59.000Z

413

The Impact Of The MCU Life Extension Solvent On Sludge Batch 8 Projected Operating Windows  

SciTech Connect (OSTI)

As a part of the Actinide Removal Process (ARP)/Modular Caustic Side Solvent Extraction Unit (MCU) Life Extension Project, a next generation solvent (NGS) and a new strip acid will be deployed. The strip acid will be changed from dilute nitric acid to dilute boric acid (0.01 M). Because of these changes, experimental testing or evaluations with the next generation solvent are required to determine the impact of these changes (if any) to Chemical Process Cell (CPC) activities, glass formulation strategies, and melter operations at the Defense Waste Processing Facility (DWPF). The introduction of the dilute (0.01M) boric acid stream into the DWPF flowsheet has a potential impact on glass formulation and frit development efforts since B2O3 is a major oxide in frits developed for DWPF. Prior knowledge of this stream can be accounted for during frit development efforts but that was not the case for Sludge Batch 8 (SB8). Frit 803 has already been recommended and procured for SB8 processing; altering the frit to account for the incoming boron from the strip effluent (SE) is not an option for SB8. Therefore, the operational robustness of Frit 803 to the introduction of SE including its compositional tolerances (i.e., up to 0.0125M boric acid) is of interest and was the focus of this study. The primary question to be addressed in the current study was: What is the impact (if any) on the projected operating windows for the Frit 803 SB8 flowsheet to additions of B2O3 from the SE in the Sludge Receipt and Adjustment Tank (SRAT)? More specifically, will Frit 803 be robust to the potential compositional changes occurring in the SRAT due to sludge variation, varying additions of ARP and/or the introduction of SE by providing access to waste loadings (WLs) of interest to DWPF? The Measurement Acceptability Region (MAR) results indicate there is very little, if any, impact on the projected operating windows for the Frit 803 SB8 system regardless of the presence or absence of ARP and SE (up to 2 wt% B2O3 contained in the SRAT and up to 2000 gallons of ARP). It should be noted that 0.95 wt% B2O3 is the nominal projected concentration in the SRAT based on a 0.0125M boric acid flowsheet with 70,000 liters of SE being added to the SRAT. The impact on CPC processing of a 0.01M boric acid solution for elution of cesium during Modular Caustic Side Solvent Extraction Unit (MCU) processing has previously been evaluated by the Savannah River National Laboratory (SRNL). Increasing the acid strength to 0.0125M boric acid to account for variations in the boric acid strength has been reviewed versus the previous evaluation. The amount of acid from the boric acid represented approximately 5% of the total acid during the previous evaluation. An increase from 0.01 to 0.0125M boric acid represents a change of approximately 1.3% which is well within the error of the acid calculation. Therefore, no significant changes to CPC processing (hydrogen generation, metal solubilities, rheological properties, REDOX control, etc.) are expected from an increase in allowable boric acid concentration from 0.01M to 0.0125M.

Peeler, D. K.; Edwards, T. B.; Stone, M. E.

2013-08-14T23:59:59.000Z

414

Improvement of windowed type environmental-cell transmission electron microscope for in situ observation of gas-solid interactions  

SciTech Connect (OSTI)

We have developed an improved, windowed type environmental-cell (E-cell) transmission electron microscope (TEM) for in situ observation of gas-solid interactions, such as catalytic reactions at atmospheric pressure. Our E-cell TEM includes a compact E-cell specimen holder with mechanical stability, resulting in smoother introduction of the desired gases compared with previous E-cell TEMs. In addition, the gas control unit was simplified by omitting the pressure control function of the TEM pre-evacuation chamber. This simplification was due to the successful development of remarkably tough thin carbon films as the window material. These films, with a thickness of <10 nm, were found to withstand pressure differences >2 atm. Appropriate arrangement of the specimen position inside the E-cell provided quantitatively analyzable TEM images, with no disturbances caused by the windowed films. As an application, we used this E-cell TEM to observe the dynamic shape change in a catalytic gold nanoparticle supported on TiO{sub 2} during the oxidation of CO gas.

Kawasaki, Tadahiro [Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa, Nagoya 464-8603 (Japan); PRESTO-JST, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan); Ueda, Kouta [Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa, Nagoya 464-8603 (Japan); Ichihashi, Mikio; Tanji, Takayoshi [EcoTopia Science Institute, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan)

2009-11-15T23:59:59.000Z

415

Market Design Test Environments  

SciTech Connect (OSTI)

Power industry restructuring continues to evolve at multiple levels of system operations. At the bulk electricity level, several organizations charged with regional system operation are implementing versions of a Wholesale Power Market Platform (WPMP) in response to U.S. Federal Energy Regulatory Commission initiatives. Recently the Energy Policy Act of 2005 and several regional initiatives have been pressing the integration of demand response as a resource for system operations. These policy and regulatory pressures are driving the exploration of new market designs at the wholesale and retail levels. The complex interplay among structural conditions, market protocols, and learning behaviors in relation to short-term and longer-term market performance demand a flexible computational environment where designs can be tested and sensitivities to power system and market rule changes can be explored. This paper presents the use of agent-based computational methods in the study of electricity markets at the wholesale and retail levels, and distinctions in problem formulation between these levels.

Widergren, Steven E.; Sun, Junjie; Tesfatsion, Leigh

2006-06-18T23:59:59.000Z

416

Fast neutron environments.  

SciTech Connect (OSTI)

The goal of this LDRD project is to develop a rapid first-order experimental procedure for the testing of advanced cladding materials that may be considered for generation IV nuclear reactors. In order to investigate this, a technique was developed to expose the coupons of potential materials to high displacement damage at elevated temperatures to simulate the neutron environment expected in Generation IV reactors. This was completed through a high temperature high-energy heavy-ion implantation. The mechanical properties of the ion irradiated region were tested by either micropillar compression or nanoindentation to determine the local properties, as a function of the implantation dose and exposure temperature. In order to directly compare the microstructural evolution and property degradation from the accelerated testing and classical neutron testing, 316L, 409, and 420 stainless steels were tested. In addition, two sets of diffusion couples from 316L and HT9 stainless steels with various refractory metals. This study has shown that if the ion irradiation size scale is taken into consideration when developing and analyzing the mechanical property data, significant insight into the structural properties of the potential cladding materials can be gained in about a week.

Buchheit, Thomas Edward; Kotula, Paul Gabriel; Lu, Ping; Brewer, Luke N. (Naval Postgraduate School, Monterey, CA); Goods, Steven Howard (Sandia National Laboratories, Livermore, CA); Foiles, Stephen Martin; Puskar, Joseph David; Hattar, Khalid Mikhiel; Doyle, Barney Lee; Boyce, Brad Lee; Clark, Blythe G.

2011-10-01T23:59:59.000Z

417

Alaska Forum on the Environment  

Broader source: Energy.gov [DOE]

The Alaska Forum on the Environment is Alaska's largest statewide gathering of environmental professionals from government agencies, non-profit and for-profit businesses, community leaders, Alaskan...

418

Stretched Polymers in Random Environment  

E-Print Network [OSTI]

We survey recent results and open questions on the ballistic phase of stretched polymers in both annealed and quenched random environments.

Dmitry Ioffe; Yvan Velenik

2011-03-01T23:59:59.000Z

419

ENVIRONMENT, SAFETY, AND HEALTH (ESH)  

Broader source: Energy.gov (indexed) [DOE]

ENVIRONMENT, SAFETY, AND HEALTH (ESH) OBJECTIVE ESH.1: Line management has established programs to assure safe accomplishment of work. Personnel exhibit an awareness of public and...

420

Environments Journal of Arid Environments 67 (2006) 142156  

E-Print Network [OSTI]

, as a tool to promote carbon sequestration and offset the increasing atmospheric carbon dioxide concentrationJournal of Arid Environments Journal of Arid Environments 67 (2006) 142­156 Carbon sequestration-arid regions together with their widespread degradation give these areas a high potential to sequester carbon

Nacional de San Luis, Universidad

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Spectroscopic Study of the Thermal Degradation of PVP-capped Rh and Pt Nanoparticles in H2 and O2 Environments  

E-Print Network [OSTI]

on a quartz window, and iii) reflectance of a film depositedcasted films deposited on a quartz window in transmission or

Borodko, Yuri

2011-01-01T23:59:59.000Z

422

CUTEst: a Constrained and Unconstrained Testing Environment ...  

E-Print Network [OSTI]

May 5, 2013 ... The Constrained and Unconstrained Environment (CUTE) [3] and its .... architecture-dependent makefile information and environment vari-.

2013-05-05T23:59:59.000Z

423

Radioactivity in Food and the Environment, 2002  

E-Print Network [OSTI]

Radioactivity in Food and the Environment, 2002 RIFE - 8 2003 #12;1 ENVIRONMENT AGENCY ENVIRONMENT AND HERITAGE SERVICE FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY Radioactivity in Food and the Environment, 2002 RIFE - 8 October 2003 #12;2 This report was compiled by the Centre for Environment

424

The impact of different climates on window and skylight design for daylighting and passive cooling and heating in residential buildings: A comparative study  

SciTech Connect (OSTI)

The study aims to explore the effect of different climates on window and skylight design in residential buildings. The study house is evaluated against climates that have design opportunities for passive systems, with emphasis on passive cooling. The study applies a variety of methods to evaluate the design. It has found that earth sheltering and night ventilation have the potential to provide 12--29% and 25--77% of the cooling requirements respectively for the study house in the selected climates. The reduction of the glazing area from 174 ft{sup 2} to 115 ft{sup 2} has different impacts on the cooling energy cost in the different climates. In climates such Fresno and Tucson, one should put the cooling energy savings as a priority for window design, particularly when determining the window size. In other climates such as Albuquerque, the priority of window design should be first given to heating savings requirements.

Al-Sallal, K.A.

1999-07-01T23:59:59.000Z

425

The nature of transition from adakitic to non-adakitic magmatism in a slabwindow setting: A synthesis from the eastern Pontides, NE Turkey  

E-Print Network [OSTI]

The eastern Pontides orogenic belt provides a window into continental arc magmatism in the AlpineHimalayan belt. The late MesozoicCenozoic geodynamic evolution of this belt remains controversial. Here we focus on the ...

Eyuboglu, Yener

426

An Investigation of Window and Lighting Systems using Life Cycle Cost Analysis for the Purpose of Energy Conservation in Langford Building A at Texas A&M University  

E-Print Network [OSTI]

Langford Building A forms part of the Langford Architectural Complex at Texas A & M University. Inefficient lighting fixtures and single pane windows in Langford Building A contribute to a considerable portion of the total cost of energy...

Hwang, Hea Yeon

2012-07-16T23:59:59.000Z

427

aircraft cabin environment: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Window Location on a King Air 200 Aircraft:aerosol.atmos.und.edu) Objective A Raytheon Beechcraft King Air 200 aircraft has been used to obtain Condensation Particle...

428

Spiral Structure and Galaxy Environment  

E-Print Network [OSTI]

Among 330 normal spirals of types Sa-Sc the fraction of objects exhibiting ``ring'', ``intermediate'' and ``spiral'' arm varieties does not correlated with environment. A similar conclusion appears to apply to the arm varieties of 123 barred spirals of types SBa-SBc. It is concluded that, among the northern Shapley-Ames galaxies, the distinction between the spiral and ring varieties of spiral arms is, within the accuracy of presently available data, independent of galaxy environment. This result suggests that the detailed morphology of spiral arms depends primarily on parent galaxy characteristics, rather than on the galactic environment.

Sidney van den Bergh

2002-04-30T23:59:59.000Z

429

Environment/Health/Safety (EHS)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: NetworkingEnvironment Environment Events Environment,AboutWPC

430

Window Spacers and Edge Seals in Insulating Glass Units: A State-of-the-Art Review and Future Perspectives  

SciTech Connect (OSTI)

Insulating glass (IG) units typically consist of multiple glass panes that are sealed and held together structurally along their perimeters. This report describes a study of edge seals in IG units. First, we summarize the components, requirements, and desired properties of edge construction in IG units, based on a survey of the available literature. Second, we review commercially available window edge seals and describe their properties, to provide an easily accessible reference for research and commercial purposes. Finally, based on the literature survey and review of current commercial edge seal systems, we identify research opportunities for future edge seal improvements and solutions.

SINTEF Building and Infrastructure; Norwegian University of Science and Technology (NTNU); Bergh, Sofie Van Den; Hart, Robert; Jelle, Bjrn Petter; Gustavsen, Arild

2013-01-31T23:59:59.000Z

431

Core and Valence Excitations in Resonant X-ray Spectroscopy using Restricted Excitation Window Time-dependent Density Functional Theory  

SciTech Connect (OSTI)

We report simulations of X-ray absorption near edge structure (XANES), resonant inelastic X-ray scattering (RIXS) and 1D stimulated X-ray Raman spectroscopy (SXRS) signals of cysteine at the oxygen, nitrogen and sulfur K and L2,3 edges. The simulated XANES signals from the restricted window time-dependent density functional theory (REW-TDDFT) and the static exchange (STEX) method are compared with experiments, showing that REW-TDDFT is more accurate and computationally less expensive than STEX. Simulated RIXS and 1D SXRS signals from REW-TDDFT give some insights on the correlation of different excitations in the molecule.

Zhang, Yu; Biggs, Jason D.; Healion, Daniel; Govind, Niranjan; Mukamel, Shaul

2012-11-21T23:59:59.000Z

432

An ultra-thin diamond membrane as a transmission particle detector and vacuum window for external microbeams  

SciTech Connect (OSTI)

Several applications of external microbeam techniques demand a very accurate and controlled dose delivery. To satisfy these requirements when post-sample ion detection is not feasible, we constructed a transmission single-ion detector based on an ultra-thin diamond membrane. The negligible intrinsic noise provides an excellent signal-to-noise ratio and enables a hit-detection efficiency of close to 100%, even for energetic protons, while the small thickness of the membrane limits beam spreading. Moreover, because of the superb mechanical stiffness of diamond, this membrane can simultaneously serve as a vacuum window and allow the extraction of an ion microbeam into the atmosphere.

Grilj, V.; Skukan, N.; Jaki?, M. [Division of Experimental Physics, Ru?er Bokovi? Institute, 10000 Zagreb (Croatia)] [Division of Experimental Physics, Ru?er Bokovi? Institute, 10000 Zagreb (Croatia); Pomorski, M. [CEA-LIST, Diamond Sensors Laboratory, Gif-sur-Yvette F-91191 (France)] [CEA-LIST, Diamond Sensors Laboratory, Gif-sur-Yvette F-91191 (France); Kada, W. [Division of Electronics and Informatics, Faculty of Science and Technology, Gunma University, Kiryu, Gunma 376-8515 (Japan)] [Division of Electronics and Informatics, Faculty of Science and Technology, Gunma University, Kiryu, Gunma 376-8515 (Japan); Iwamoto, N.; Kamiya, T.; Ohshima, T. [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency (JAEA), Takasaki, Gunma 370-1292 (Japan)] [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency (JAEA), Takasaki, Gunma 370-1292 (Japan)

2013-12-09T23:59:59.000Z

433

Symmetrical windowing for quantum states in quasi-classical trajectory simulations: Application to electronically non-adiabatic processes  

SciTech Connect (OSTI)

A recently described symmetrical windowing methodology [S. J. Cotton and W. H. Miller, J. Phys. Chem. A 117, 7190 (2013)] for quasi-classical trajectory simulations is applied here to the Meyer-Miller [H.-D. Meyer and W. H. Miller, J. Chem. Phys. 70, 3214 (1979)] model for the electronic degrees of freedom in electronically non-adiabatic dynamics. Results generated using this classical approach are observed to be in very good agreement with accurate quantum mechanical results for a variety of test applications, including problems where coherence effects are significant such as the challenging asymmetric spin-boson system.

Cotton, Stephen J.; Miller, William H., E-mail: millerwh@berkeley.edu [Department of Chemistry and Kenneth S. Pitzer Center for Theoretical Chemistry, University of California, Berkeley, and Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States)

2013-12-21T23:59:59.000Z

434

_____________________________ Environment, Health, & Safety _________ __________________ Training Program  

E-Print Network [OSTI]

, training requirements, work planning and control, traffic safety, Building 76 emergency information be applied · Recognize who is accountable for safety · Describe the purpose of a work authorization · Recall11/22/2011 _____________________________ Environment, Health, & Safety

Eisen, Michael

435

Global Environment Facility Evaluation Office  

E-Print Network [OSTI]

Global Environment Facility Evaluation Office PROTECTED AREAS AND AVOIDED DEFORESTATION #12;Protected Areas and Avoided Deforestation: An Econometric Evaluation - i - TABLE OF CONTENTS 1................................................................................4 3.3 ESTIMATED EFFECTS OF PROTECTED AREAS ON DEFORESTATION

Pfaff, Alex

436

Robot manipulation in human environments  

E-Print Network [OSTI]

Human environments present special challenges for robot manipulation. They are often dynamic, difficult to predict, and beyond the control of a robot engineer. Fortunately, many characteristics of these settings can be ...

Edsinger, Aaron Ladd, 1972-

2007-01-01T23:59:59.000Z

437

Robot Manipulation in Human Environments  

E-Print Network [OSTI]

Human environments present special challenges for robot manipulation. They are often dynamic, difficult to predict, and beyond the control of a robot engineer. Fortunately, many characteristics of these settings can be ...

Edsinger, Aaron

2007-01-16T23:59:59.000Z

438

DPC materials and corrosion environments  

SciTech Connect (OSTI)

This review focuses on the performance of basket materials that could be exposed to ground water over thousands of years, and prospective disposal overpack materials that could possibly be used to protect dual-purpose canisters (DPCs) in disposal environments.

Ilgen, Anastasia G.; Bryan, Charles R.; Stephanie Teich-McGoldrick; Ernest Hardin

2014-10-01T23:59:59.000Z

439

ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT  

E-Print Network [OSTI]

ENERGY, ENVIRONMENT AND SUSTAINABLE DEVELOPMENT E u r o p e a n C o m m i s s i o n Community Research P r o j e c t s y n o p s e s EUR 19359 Vol. I: Marine processes, ecosystems and interactions Eur - Energy, environment and sustainable development Contact: Mr. Klaus - Günther BARTHEL - rue de la Loi, 200

Döös, Kristofer

440

Undergraduate Degrees 2014 School of Earth & Environment  

E-Print Network [OSTI]

Undergraduate Degrees 2014 School of Earth & Environment FACULTY OF ENVIRONMENT #12;UNIVERSITYOFLEEDS 03 Contents Welcome to the School of Earth & Environment 4 Choosing the right degree 6 Three, MGeol, MGeophys) The MSc Track Fieldwork 8 Why study the environment? 10 Environment and Business 12

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Radioactivity in Food and the Environment, 1997  

E-Print Network [OSTI]

Radioactivity in Food and the Environment, 1997 RIFE - 3 1998 SCOTTISH ENVIRONMENT PROTECTION SCOTTISH ENVIRONMENT PROTECTION AGENCY Radioactivity in Food and the Environment, 1997 September 1998 #12 Environment Protection Agency in 1997. Measurements of radioactivity have been carried out in a range

442

Global and Convex Optimization in Modeling Environments ...  

E-Print Network [OSTI]

Aug 12, 2002 ... scientific and technical computing, visualization, and documentation ... development/maintenance, overall level of integration, immediate ... develop and to run 'silent' LGO implementations (without the Windows interface); a ... Figure 4) lets the user to control solver choices and several heuristic approaches.

Administrator

2002-08-16T23:59:59.000Z

443

Renewable energy technologies and its adaptation in an urban environment  

SciTech Connect (OSTI)

This general article is based on the inaugural talk delivered at the opening of OMTAT 2013 conference. It notes that the integration of renewable energy sources into living and transport sectors presents a daunting task, still. In spite of the fact that the earth and its atmosphere continually receive 1.7 10{sup 17} watts of radiation from the sun, in the portfolio of sustainable and environment friendly energy options, which is about 16% of the worlds energy consumption and mostly met by biomass, only a paltry 0.04% is accredited to solar. First and second generation solar cells offer mature technologies for applications. The most important difficulty with regards to integration with structures is not only the additional cost, but also the lack of sufficient knowledge in managing the available energy smartly and efficiently. The incorporation of PV as a part of building fabric greatly reduces the overall costs compared with retrofitting. BIPV (Building Integrated photovoltaic) is a critical technology for establishing aesthetically pleasing solar structures. Infusing PV and building elements is greatly simplified with some of the second generation thin film technologies now manufactured as flexible panels. The same holds true for 3{sup rd} generation technologies under development such as, and dye- and quantum dot- sensitized solar cells. Additionally, these technologies offer transparent or translucent solar cells for incorporation into windows and skylights. This review deals with the present state of solar cell technologies suitable for BIPV and the status of BIPV applications and its future prospects.

Thampi, K. Ravindranathan, E-mail: ravindranathan.thampi@ucd.ie; Byrne, Owen, E-mail: ravindranathan.thampi@ucd.ie; Surolia, Praveen K., E-mail: ravindranathan.thampi@ucd.ie [SFI Strategic Research Cluster in Solar Energy Conversion, School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin 4 (Ireland)

2014-01-28T23:59:59.000Z

444

Development of a Window Based Security System for Electronic Data Interchange  

E-Print Network [OSTI]

The Electronic Data Interchange (EDI) is the exchange of standardized documents between computer systems for business use. The objective of this study is to make Electronic Data Interchange secure to use and to eliminate human intervention in the transfer of data between business partners so that productivity and efficiency can be improved and also promote its usage between two or more trading organizations. This paper provides an overview of EDI by describing the traditional problems of exchanging information in business environments and how the EDI solves those problems and gives benefits to the company that makes use of EDI. This paper also introduces the common EDI Standards and explains how it works, how it is used over the internet and the security measures implemented. The system was executed on both local area network and wide area network after a critical study of the existing EDI methods and also implemented using VB.Net programming language. Finally, an interactive program was developed that handle...

Philip, Achimugu; Joshua, Abah

2011-01-01T23:59:59.000Z

445

Spring Home Maintenance: Windows, Windows, Windows! | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment of Energy U.S.Improve Emitter EfficiencyDepartment of EnergyCaulking is an

446

Fuel Economy and Emissions Effects of Low Tire Pressure, Open Windows, Roof Top and Hitch-Mounted Cargo, and Trailer  

SciTech Connect (OSTI)

To quantify the fuel economy (FE) effect of some common vehicle accessories or alterations, a compact passenger sedan and a sport utility vehicle (SUV) were subjected to SAE J2263 coastdown procedures. Coastdowns were conducted with low tire pressure, all windows open, with a roof top or hitch-mounted cargo carrier, and with the SUV pulling an enclosed cargo trailer. From these coastdowns, vehicle dynamometer coefficients were developed which enabled the execution of vehicle dynamometer experiments to determine the effect of these changes on vehicle FE and emissions over standard drive cycles and at steady highway speeds. The FE penalty associated with the rooftop cargo box mounted on the compact sedan was as high as 25-27% at higher speeds, where the aerodynamic drag is most pronounced. For both vehicles, use of a hitch mounted cargo tray carrying a similar load resulted in very small FE penalties, unlike the rooftop cargo box. The results for the SUV pulling a 3500 pound enclosed cargo trailer were rather dramatic, resulting in FE penalties ranging from 30%, for the city cycle, to 50% at 80 mph, at which point significant CO generation indicated protective enrichment due to high load. Low tire pressure cases resulted in negligible to 10% FE penalty depending on the specific case and test point. Driving with all four windows open decreased FE by 4-8.5% for the compact sedan, and 1-4% for the SUV.

Thomas, John F [ORNL] [ORNL; Huff, Shean P [ORNL] [ORNL; West, Brian H [ORNL] [ORNL

2014-01-01T23:59:59.000Z

447

Arbeidslivets lover Act relating to working environment,  

E-Print Network [OSTI]

Arbeidslivets lover Act relating to working environment, working hours and employment protection, etc. (Working Environment Act). as subsequently amended, last by the Act of 14. December 2012 No. 80.notification................................................................... 6 Chapter 3. Working environment measures..................................... 6 Section.3

Johansen, Tom Henning

448

Learning Curve Management in Educational Programming Environments  

E-Print Network [OSTI]

Learning Curve Management in Educational Programming Environments Benjamin H. Brinckerhoff Computer programmers are best served by integrated development environments that adapt to their growing sophistication programming environments. We provide pedagogical justification for each goal, describe possible supporting

Goldman, Kenneth J.

449

Prediction of Corrosion of Alloys in Mixed-Solvent Environments  

SciTech Connect (OSTI)

Corrosion is much less predictable in organic or mixed-solvent environments than in aqueous process environments. As a result, US chemical companies face greater uncertainty when selecting process equipment materials to manufacture chemical products using organic or mixed solvents than when the process environments are only aqueous. Chemical companies handle this uncertainty by overdesigning the equipment (wasting money and energy), rather than by accepting increased risks of corrosion failure (personnel hazards and environmental releases). Therefore, it is important to develop simulation tools that would help the chemical process industries to understand and predict corrosion and to develop mitigation measures. To create such tools, we have developed models that predict (1) the chemical composition, speciation, phase equilibria, component activities and transport properties of the bulk (aqueous, nonaqueous or mixed) phase that is in contact with the metal; (2) the phase equilibria and component activities of the alloy phase(s) that may be subject to corrosion and (3) the interfacial phenomena that are responsible for corrosion at the metal/solution or passive film/solution interface. During the course of this project, we have completed the following: (1) Development of thermodynamic modules for calculating the activities of alloy components; (2) Development of software that generates stability diagrams for alloys in aqueous systems; these diagrams make it possible to predict the tendency of metals to corrode; (3) Development and extensive verification of a model for calculating speciation, phase equilibria and thermodynamic properties of mixed-solvent electrolyte systems; (4) Integration of the software for generating stability diagrams with the mixed-solvent electrolyte model, which makes it possible to generate stability diagrams for nonaqueous or mixed-solvent systems; (5) Development of a model for predicting diffusion coefficients in mixed-solvent electrolyte systems; (6) Development of fundamentals of a detailed kinetic model of general corrosion, which includes a detailed treatment of local chemistry changes near the metal/solution interface coupled with transport through a liquid layer and solid phases at the interface; (7) Development of parameters for OLI's kinetic model of general corrosion of common engineering alloys in aqueous systems with a variety of solutes. With this model, the users will be able to predict the effect of various process conditions (such as environment composition, temperature, pressure) on the general corrosion of alloys; (8)Comprehensive review of the fundamentals of the models by an Academic Review Panel, which was performed in conjunction with three annual review meetings; (9)Development and commercial release of the Corrosion Analyzer, a Windows software product that encompasses the thermodynamic model, a facility for generating stability diagrams and the model for predicting the rates of general corrosion of selected alloys in aqueous systems.

A. Anderko, P. Wang, R. D. Young, D. P. Riemer, P. McKenzie and M. M. Lencka (OLI Systems Inc.); S. S. Babu and P. Angelini (Oak Ridge National Laboratory)

2003-06-05T23:59:59.000Z

450

Tanzania Traditional Energy Development and Environment Organization...  

Open Energy Info (EERE)

Traditional Energy Development and Environment Organization (TaTEDO) Jump to: navigation, search Name: Tanzania Traditional Energy Development and Environment Organization (TaTEDO)...

451

Effects on the Physical Environment (Hydrodynamics, Sediment...  

Broader source: Energy.gov (indexed) [DOE]

Effects on the Physical Environment (Hydrodynamics, Sediment Transport, and Water Quality) Effects on the Physical Environment (Hydrodynamics, Sediment Transport, and Water...

452

Independent Oversight Environment, Oak Ridge National Laboratory...  

Broader source: Energy.gov (indexed) [DOE]

Environment, Oak Ridge National Laboratory - June 2006 Independent Oversight Environment, Oak Ridge National Laboratory - June 2006 June 2006 Inspection of the Environmental...

453

Anthropogenic radionuclides in the environment  

SciTech Connect (OSTI)

Studies of radionuclides in the environment have entered a new era with the renaissance of nuclear energy and associated fuel reprocessing, geological disposal of high-level nuclear wastes, and concerns about national security with respect to nuclear non-proliferation. This work presents an overview of anthropogenic radionuclide contamination in the environment, as well as the salient geochemical behavior of important radionuclides. We first discuss the following major anthropogenic sources and current development that contribute to the radionuclide contamination of the environment: (1) nuclear weapons program; (2) nuclear weapons testing; (3) nuclear power plants; (4) commercial fuel reprocessing; (5) geological repository of high-level nuclear wastes, and (6) nuclear accidents. Then, we summarize the geochemical behavior for radionuclides {sup 99}Tc, {sup 129}I, and {sup 237}Np, because of their complex geochemical behavior, long half-lives, and presumably high mobility in the environment. Biogeochemical cycling and environment risk assessment must take into account speciation of these redox-sensitive radionuclides.

Hu, Q; Weng, J; Wang, J

2007-11-15T23:59:59.000Z

454

Environment, Safety and Health Reporting  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To ensure timely collection, reporting, analysis, and dissemination of information on environment, safety, and health issues as required by law or regulations or as needed to ensure that the Department of Energy (DOE) and National Nuclear Security Administration are kept fully informed on a timely basis about events that could adversely affect the health and safety of the public or the workers, the environment, the intended purpose of DOE facilities, or the credibility of the Department. Cancels DOE O 210.1, DOE O 231.1, DOE O 232.1A. Canceled by DOE O 231.1B. DOE O 231.1B cancels all portions pertaining to environment, safety, and health reporting. Occurrence reporting and processing of operations information provisions remain in effect until January 1, 2012.

2012-01-01T23:59:59.000Z

455

AGN Environments in the Sloan Digital Sky Survey I: Dependence on Type, Redshift, and Luminosity  

E-Print Network [OSTI]

We explore how the local environment is related to the redshift, type, and luminosity of active galactic nuclei (AGN). Recent simulations and observations are converging on the view that the extreme luminosity of quasars is fueled in major mergers of gas-rich galaxies. In such a picture, quasars are expected to be located in regions with a higher density of galaxies on small scales where mergers are more likely to take place. However, in this picture, the activity observed in low-luminosity AGN is due to secular processes that are less dependent on the local galaxy density. To test this hypothesis, we compare the local photometric galaxy density on kiloparsec scales around spectroscopic Type I and Type II quasars to the local density around lower luminosity spectroscopic Type I and Type II AGN. To minimize projection effects and evolution in the photometric galaxy sample we use to characterize AGN environments, we place our random control sample at the same redshift as our AGN and impose a narrow redshift window around both the AGN and control targets. We find that higher luminosity AGN have more overdense environments compared to lower luminosity AGN on all scales out to our $2\\Mpchseventy$ limit. Additionally, in the range $0.3\\leqslant z\\leqslant 0.6$, Type II quasars have similarly overdense environments to those of bright Type I quasars on all scales out to our $2\\Mpchseventy$ limit, while the environment of dimmer Type I quasars appears to be less overdense than the environment of Type II quasars. We see increased overdensity for Type II AGN compared to Type I AGN on scales out to our limit of $2\\Mpchseventy$ in overlapping redshift ranges. We also detect marginal evidence for evolution in the number of galaxies within $2\\Mpchseventy$ of a quasar with redshift.

Natalie E. Strand; Robert J. Brunner; Adam D. Myers

2008-07-24T23:59:59.000Z

456

Linked Environments for Atmospheric Discovery Linked Environments for Atmospheric  

E-Print Network [OSTI]

Unidata Program Center #12;Linked Environments for Atmospheric Discovery The Team: 9 institutions and 105 MethodologyTraditional NWP Methodology STATIC OBSERVATIONS Radar Data Mobile Mesonets Surface Observations Satellites The Process is Entirely Prescheduled and Serial; It Does NOT Respond to the Weather! The Process

457

Yucca Mountain and The Environment  

SciTech Connect (OSTI)

The Yucca Mountain Project places a high priority on protecting the environment. To ensure compliance with all state and federal environmental laws and regulations, the Project established an Environmental Management System. Important elements of the Environmental Management System include the following: (1) monitoring air, water, and other natural resources; (2) protecting plant and animal species by minimizing land disturbance; (3) restoring vegetation and wildlife habitat in disturbed areas; (4) protecting cultural resources; (5) minimizing waste, preventing pollution, and promoting environmental awareness; and (6) managing of hazardous and non-hazardous waste. Reducing the impacts of Project activities on the environment will continue for the duration of the Project.

NA

2005-04-12T23:59:59.000Z

458

Environment, Safety, and Health Reporting  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To ensure timely collection, reporting, analysis, and dissemination of information on environment, safety, and health issues as required by law or regulations or as needed to ensure that the Department of Energy (DOE) and National Nuclear Security Administration (NNSA) are kept fully informed on a timely basis about events that could adversely affect the health and safety of the public or the workers, the environment, the intended purpose of DOE facilities, or the credibility of the Department. Cancels DOE O 210.1, DOE O 231.1, and DOE O 232.1A. Canceled by DOE O 232.2.

2003-08-19T23:59:59.000Z

459

Database of Low-E Storm Window Energy Performance across U.S. Climate Zones (Task ET-WIN-PNNL-FY13-01_5.3)  

SciTech Connect (OSTI)

This report describes process, assumptions, and modeling results produced in support of the Emerging Technologies Low-e Storm Windows Task 5.3: Create a Database of U.S. Climate-Based Analysis for Low-E Storm Windows. The scope of the overall effort is to develop a database of energy savings and cost effectiveness of low-E storm windows in residential homes across a broad range of U.S. climates using the National Energy Audit Tool (NEAT) and RESFEN model calculations. This report includes a summary of the results, NEAT and RESFEN background, methodology, and input assumptions, and an appendix with detailed results and assumptions by cliamte zone. Both sets of calculation results will be made publicly available through the Building America Solution Center.

Cort, Katherine A.; Culp, Thomas D.

2013-09-01T23:59:59.000Z

460

Two-Dimensional Computational Fluid Dynamics and Conduction Simulations of Heat Transfer in Horizontal Window Frames with Internal Cavities  

SciTech Connect (OSTI)

This paper assesses the accuracy of the simplified frame cavity conduction/convection and radiation models presented in ISO 15099 and used in software for rating and labeling window products. Temperatures and U-factors for typical horizontal window frames with internal cavities are compared; results from Computational Fluid Dynamics (CFD) simulations with detailed radiation modeling are used as a reference. Four different frames were studied. Two were made of polyvinyl chloride (PVC) and two of aluminum. For each frame, six different simulations were performed, two with a CFD code and four with a building-component thermal-simulation tool using the Finite Element Method (FEM). This FEM tool addresses convection using correlations from ISO 15099; it addressed radiation with either correlations from ISO 15099 or with a detailed, view-factor-based radiation model. Calculations were performed using the CFD code with and without fluid flow in the window frame cavities; the calculations without fluid flow were performed to verify that the CFD code and the building-component thermal-simulation tool produced consistent results. With the FEM-code, the practice of subdividing small frame cavities was examined, in some cases not subdividing, in some cases subdividing cavities with interconnections smaller than five millimeters (mm) (ISO 15099) and in some cases subdividing cavities with interconnections smaller than seven mm (a breakpoint that has been suggested in other studies). For the various frames, the calculated U-factors were found to be quite comparable (the maximum difference between the reference CFD simulation and the other simulations was found to be 13.2 percent). A maximum difference of 8.5 percent was found between the CFD simulation and the FEM simulation using ISO 15099 procedures. The ISO 15099 correlation works best for frames with high U-factors. For more efficient frames, the relative differences among various simulations are larger. Temperature was also compared, at selected locations on the frames. Small differences was found in the results from model to model. Finally, the effectiveness of the ISO cavity radiation algorithms was examined by comparing results from these algorithms to detailed radiation calculations (from both programs). Our results suggest that improvements in cavity heat transfer calculations can be obtained by using detailed radiation modeling (i.e. view-factor or ray-tracing models), and that incorporation of these strategies may be more important for improving the accuracy of results than the use of CFD modeling for horizontal cavities.

Gustavsen, Arlid; Kohler, Christian; Dalehaug, Arvid; Arasteh, Dariush

2008-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

environment  

National Nuclear Security Administration (NNSA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartmentNationalRestart of the Review of theOFFICE OF CIVILAMENDMENT20/%2A6/%2A6/%2A en

462

Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4: Networking

463

Air PSE (Problem Solving Environment)  

E-Print Network [OSTI]

PSE - 1 Air PSE (Problem Solving Environment) MODELLING OF AIR POLLUTION IN THE LOS ANGELES BASIN WITH AIR PSE Developed by Prof. Donald Dabdub Computational Environmental Sciences Laboratory Mechanical COMPUTER MODELS An air pollution model is a computer program that computes how the different chemical

Nizkorodov, Sergey

464

Virtual Control Systems Environment (VCSE)  

ScienceCinema (OSTI)

Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

Atkins, Will

2014-02-26T23:59:59.000Z

465

Environment-induced dynamical chaos  

E-Print Network [OSTI]

We examine the interplay of nonlinearity of a dynamical system and thermal fluctuation of its environment in the ``physical limit'' of small damping and slow diffusion in a semiclassical context and show that the trajectories of c-number variables exhibit dynamical chaos due to the thermal fluctuations of the bath.

Bidhan Chandra Bag; Deb Shankar Ray

2000-05-18T23:59:59.000Z

466

Star Formation and Galaxy Environment  

E-Print Network [OSTI]

The dependence of star formation rate on galaxian environment is a key issue in the understanding of galaxy formation and evolution. However, the study of this subject is complex and observationally challenging. This paper reviews some of the current results, drawing mostly from recent large redshift surveys such the LCRS, the MORPH collaboration, and the CNOC1 and CNOC2 redshift surveys.

H. K. C. Yee

2000-04-05T23:59:59.000Z

467

Virtual Control Systems Environment (VCSE)  

SciTech Connect (OSTI)

Will Atkins, a Sandia National Laboratories computer engineer discusses cybersecurity research work for process control systems. Will explains his work on the Virtual Control Systems Environment project to develop a modeling and simulation framework of the U.S. electric grid in order to study and mitigate possible cyberattacks on infrastructure.

Atkins, Will

2012-10-08T23:59:59.000Z

468

The Center for Indoor Environments  

E-Print Network [OSTI]

review of indoor air pollution in schools requested by the Environment Committee of the Connecticut risk 99 Industrial hygiene visit and walk- through assessment 99 Review of industrial hygiene interventions 99 Provide guidance on protecting occupants from exposures during construction 99 Coordinate

Kim, Duck O.

469

tight environment high radiation area  

E-Print Network [OSTI]

#12;Irradiation Studies of Optical Components - II CERN, week of Oct. 24, 2005 1.4 GeV proton beam 4 x· tight environment · high radiation area · non-serviceable area · passive components · optics only, no active electronics · transmit image through flexible fiber bundle Optical Diagnostics 01-13-2006 1 #12

McDonald, Kirk

470

Environment Canada Industrial Programs Section  

E-Print Network [OSTI]

#12;Environment Canada Industrial Programs Section Environmental Protection Guide for Best Management Practices for Process Water Management at Fish Processing Plants in British Columbia h~ NovaTec Consultants Inc. Environmental Engineers and Scientists September 1994 Project No: 1043.16 #12;DISCLAIMER

471

Active Learning of Group-Structured Environments  

E-Print Network [OSTI]

Active Learning of Group-Structured Environments Gabor Bartok, Csaba Szepesvari , Sandra Zilles with their environment. We investigate learning environments that have a group structure. We introduce a learning model an environment from partial information is far from trivial. However, positive results for special subclasses

Szepesvari, Csaba

472

OBJECTIVES OF THE EDINBURGH KNOWLEDGE ENVIRONMENT  

E-Print Network [OSTI]

OBJECTIVES OF THE EDINBURGH KNOWLEDGE ENVIRONMENT PARTNERSHIP The University of Edinburgh, Heriot and natural environment. The Edinburgh Knowledge Environment Partnership will thus provide a unique research between key stakeholders in the built and natural environment and to reach out in assisting

Painter, Kevin

473

Using Usage Information in Collaborative Information Environments  

E-Print Network [OSTI]

Chalmers,M. Position paper, Proceedings of the Collaborative Virtual Environments Workshop: CVE96 (Nottingham University)

Chalmers, M.; Position paper, Proceedings of the Collaborative Virtual Environments Workshop: CVE96 (Nottingham University) [More Details

474

MOOSE: Multiphysics Object-Oriented Simulation Environment  

SciTech Connect (OSTI)

An overview of Idaho National Laboratory's MOOSE: Multiphysics Object-Oriented Simulation Environment

Gaston, Derek

2014-04-09T23:59:59.000Z

475

MOOSE: Multiphysics Object-Oriented Simulation Environment  

ScienceCinema (OSTI)

An overview of Idaho National Laboratory's MOOSE: Multiphysics Object-Oriented Simulation Environment

Gaston, Derek

2014-05-30T23:59:59.000Z

476

Environment, Safety and Health Reporting  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order addresses DOE/NNSA receiving timely, accurate information about events that have affected or could adversely affect the health, safety and security of the public or workers, the environment, the operations of DOE facilities, or the credibility of the Department. Cancels DOE O 231.1A Chg 1, DOE M 231.1-1A Chg 2 and DOE N 234.1. Admin Chg 1, dated 11-28-12, cancels DOE O 231.1B.

2011-06-27T23:59:59.000Z

477

Coping with Hot Work Environments  

E-Print Network [OSTI]

exposed to these conditions. A hot work environment can impair safety and health. Both workers and their employers are responsi- ble for taking steps to prevent heat stress in the work- place. How Your Body Handles Heat Humans are warm-blooded, which... evaporation. Wiping sweat from the skin with a cloth also prevents cooling from evaporation. In hot, humid conditions, hard work becomes harder. The sweat glands release moisture and essential David W. Smith, Extension Safety Program The Texas A...

Smith, David

2005-04-28T23:59:59.000Z

478

Environment, Safety and Health Reporting  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order addresses DOE/NNSA receiving timely, accurate information about events that have affected or could adversely affect the health, safety and security of the public or workers, the environment, the operations of DOE facilities, or the credibility of the Department. Cancels DOE O 231.1A Chg 1, DOE M 231.1-1A Chg 2 and DOE N 234.1. Admin Chg 1, dated 11-28-12.

2011-06-27T23:59:59.000Z

479

DragNDrop Directions v7 Windows Users: How do I access DragNDrop web documents to place or update them?  

E-Print Network [OSTI]

DragNDrop Directions v7 2/25/10 Windows Users: How do I access DragNDrop web documents to place or update them? If you are on the PPPL Domain: Open My Computer. Then the P drive. Find: P:\\web\

Princeton Plasma Physics Laboratory

480

Ingeniare. Revista chilena de ingeniera, vol. 17 N 3, 2009, pp. 393-403 MULTIPLE ANT COLONY SYSTEM FOR A VRP WITH TIME WINDOWS  

E-Print Network [OSTI]

SYSTEM FOR A VRP WITH TIME WINDOWS AND SCHEDULED LOADING M?LTIPLES SISTEMAS DE COLONIAS DE HORMIGAS PARA propone e implementa una metaheurística basada en múltiples sistemas de colonias de hormigas, cada una con de tiempo dentro del procedimiento constructivo para actualizar y programar la salida de un vehículo

Ferland, Jacques A.

Note: This page contains sample records for the topic "windows environment weps" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

ISTRUZIONI INSTALLAZIONE JAVA SUN JDK (Windows) 1. Scaricare dal sito della SUN (http://java.sun.com/javase/downloads/index.jsp) l'ultima  

E-Print Network [OSTI]

ISTRUZIONI INSTALLAZIONE JAVA SUN JDK (Windows) 1. Scaricare dal sito della SUN (http://java.sun default, Java viene installato nella cartella C:\\Sun\\SDK 3. Per compilare programmi Java, occorre settare'installazione non si è deciso di installare Java altrove, il percorso completo è il seguente: C:\\Sun

Roma "La Sapienza", Università di

482

RNEDE: Resilient Network Design Environment  

SciTech Connect (OSTI)

Modern living is more and more dependent on the intricate web of critical infrastructure systems. The failure or damage of such systems can cause huge disruptions. Traditional design of this web of critical infrastructure systems was based on the principles of functionality and reliability. However, it is increasingly being realized that such design objectives are not sufficient. Threats, disruptions and faults often compromise the network, taking away the benefits of an efficient and reliable design. Thus, traditional network design parameters must be combined with self-healing mechanisms to obtain a resilient design of the network. In this paper, we present RNEDEa resilient network design environment that that not only optimizes the network for performance but tolerates fluctuations in its structure that result from external threats and disruptions. The environment evaluates a set of remedial actions to bring a compromised network to an optimal level of functionality. The environment includes a visualizer that enables the network administrator to be aware of the current state of the network and the suggested remedial actions at all times.

Venkat Venkatasubramanian, Tanu Malik, Arun Giridh; Craig Rieger; Keith Daum; Miles McQueen

2010-08-01T23:59:59.000Z

483

Using CentOS in Public Lab for Remote Login to hafez.sfsu.edu The computers in the public computer lab are able to boot either Microsoft Windows or CentOS. To  

E-Print Network [OSTI]

lab are able to boot either Microsoft Windows or CentOS. To use CentOS hold down the Space Bar when booting up the computer. If the computer is already running Windows, restart and hold Space Bar. The following screen should appear. Use the keyboard arrows to select CentOS and press Enter. After CentOS boots

Mahmoodi, Hamid

484

You can use a mobile device to access your Exchange account. On this page you will find the settings ActiveSync/Exchange to set up your Windows mobile devices.  

E-Print Network [OSTI]

Overview: You can use a mobile device to access your Exchange account. On this page you will find the settings ActiveSync/Exchange to set up your Windows mobile devices. If you set up an Exchange and task data! Use these settings to access your Exchange e-mail on a Windows mobile device: Username

Qiu, Weigang

485

Quantum Capacities of Channels with small Environment  

E-Print Network [OSTI]

We investigate the quantum capacity of noisy quantum channels which can be represented by coupling a system to an effectively small environment. A capacity formula is derived for all cases where both system and environment are two-dimensional--including all extremal qubit channels. Similarly, for channels acting on higher dimensional systems we show that the capacity can be determined if the channel arises from a sufficiently small coupling to a qubit environment. Extensions to instances of channels with larger environment are provided and it is shown that bounds on the capacity with unconstrained environment can be obtained from decompositions into channels with small environment.

Michael M. Wolf; David Perez-Garcia

2006-07-11T23:59:59.000Z

486

Study of changes in the Solar Environment  

E-Print Network [OSTI]

Recent studies have shown that the local environment of the Sun is a complex one with the presence of several supernova shock bubbles and interstellar clouds. Even within this environment, the Sun is moving with a velocity of about 15 km/s toward the interior of the galaxy. We examine the changes in the local ISM environment experienced by the Sun in the past and then discuss the interaction of the Sun with these different environments. Lastly, we inquire how this must have changed the cosmic ray environment of the earth since this remains one of the few methods to test the changes in the local ISM environment over astronomical time scales. %

M N Vahia

2004-04-05T23:59:59.000Z

487

Federal Agencies Combine Efforts to Protect Environment and Reduce...  

Energy Savers [EERE]

by Dennis Schroeder, NREL 22090. Buying an Appliance this Holiday Season? ENERGY STAR Products will Save You Money and Energy All Year A window air conditioner is one solution...

488

Environment, Health & Safety Division 31 July, 2009  

E-Print Network [OSTI]

Environment, Health & Safety Division 31 July, 2009 MEMORANDUM To: Division Safety Coordinators Division Liaisons All JHA Users From: John Seabury Environment, Health & Safety Division Subject: Job Hazard Analysis ­ Description of Work Rev 5 Discussion, Requirements, Helpful Hints and Examples

489

Environment, Safety, and Health Reporting Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Manual provides detailed requirements to supplement DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING, which establishes management objectives and requirements for reporting environment, safety and health information. Chg 1, 11-7-96.

1996-11-07T23:59:59.000Z

490

Environment Safety and Health Reporting Manual  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. Does not cancel other directives.

1995-09-30T23:59:59.000Z

491

Environment assisted energy transfer in dimer system  

SciTech Connect (OSTI)

The influence of collective and multilocal environments on the energy transfer between the levels of a dimer is studied. The dynamics of energy transfer are investigated by considering coupling of collective environment with the levels of the dimer in the presence of both two individuals and mutually correlated multilocal environments. It is shown that every way of coupling we consider assists, though differently, the probability of transition between the levels of dimer. The probability of transition is strongly enhanced when the two local environments are mutually correlated. -- Highlights: The dynamics of energy transfer between the levels of a dimer are studied. Coupling of collective as well as individual environments are considered. The environments are in spin star configurations. The environment assists the energy transfer between the levels. For correlated multilocal environments, the transition probability is almost 100%.

Khan, Salman, E-mail: sksafi@comsats.edu.pk [Department of Physics, COMSATS Institute of Information Technology, Chak Shahzad, Islamabad (Pakistan)] [Department of Physics, COMSATS Institute of Information Technology, Chak Shahzad, Islamabad (Pakistan); Ibrahim, M.; Khan, M.K. [Department of Physics, Quaid-i-Azam University, Islamabad (Pakistan)] [Department of Physics, Quaid-i-Azam University, Islamabad (Pakistan)

2014-02-15T23:59:59.000Z

492

Quantum Darwinism in a hazy environment  

E-Print Network [OSTI]

Quantum Darwinism recognizes that we - the observers - acquire our information about the "systems of interest" indirectly from their imprints on the environment. Here, we show that information about a system can be acquired from a mixed-state, or hazy, environment, but the storage capacity of an environment fragment is suppressed by its initial entropy. In the case of good decoherence, the mutual information between the system and the fragment is given solely by the fragment's entropy increase. For fairly mixed environments, this means a reduction by a factor 1-h, where h is the haziness of the environment, i.e., the initial entropy of an environment qubit. Thus, even such hazy environments eventually reveal the state of the system, although now the intercepted environment fragment must be larger by ~1/(1-h) to gain the same information about the system.

Michael Zwolak; H. T. Quan; Wojciech H. Zurek

2009-10-09T23:59:59.000Z

493

FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY  

E-Print Network [OSTI]

.................................................................................... 21 1.2.4. Food irradiation ....1 FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY Radioactivity in Food, Fisheries and Aquaculture Science on behalf of the Food Standards Agency and the Scottish Environment

494

Analytical techniques for debugging pervasive computing environments  

E-Print Network [OSTI]

User level debugging of pervasive environments is important as it provides the ability to observe changes that occur in a pervasive environment and fix problems that result from these changes, especially since pervasive ...

Nigam, Atish, 1981-

2004-01-01T23:59:59.000Z

495

Toward an Integrated Online Learning Environment  

E-Print Network [OSTI]

We are building in LON-CAPA an integrated learning environment that will enable the development, dissemination and evaluation of PER-based material. This environment features a collection of multi-level research-based ...

Teodorescu, Raluca

496

Abundance measurements in stellar environments  

SciTech Connect (OSTI)

Most of what we know about stars, and systems of stars, is derived from the analysis of their electromagnetic radiation. This lesson is an attempt to describe to Physicists, without any Astrophysical background, the framework to understand the present status of abundance determination in stellar environments and its limit. These notes are dedicated to the recently passed, November 21, 2013, Prof. Dimitri Mihalas who spent his life confuting the 19th century positivist philosopher Auguste Comte who stated that we shall not at all be able to determine the chemical composition of stars.

Leone, F. [Universit di Catania, Dipartimento di Fisica e Astronomia, Sezione Astrofisica, Via S. Sofia 78, 95123 Catania (Italy)

2014-05-09T23:59:59.000Z

497

Harsh environments electronics : downhole applications.  

SciTech Connect (OSTI)

The development and operational sustainment of renewable (geothermal) and non-renewable (fossil fuel) energy resources will be accompanied by increasingly higher costs factors: exploration and site preparation, operational maintenance and repair. Increased government oversight in the wake of the Gulf oil spill will only add to the cost burden. It is important to understand that downhole conditions are not just about elevated temperatures. It is often construed that military electronics are exposed to the upper limit in terms of extreme service environments. Probably the harshest of all service conditions for electronics and electrical equipment are those in oil, gas, and geothermal wells. From the technology perspective, advanced materials, sensors, and microelectronics devices are benefificial to the exploration and sustainment of energy resources, especially in terms of lower costs. Besides the need for the science that creates these breakthroughs - there is also a need for sustained engineering development and testing. Downhole oil, gas, and geothermal well applications can have a wide range of environments and reliability requirements: Temperature, Pressure, Vibration, Corrosion, and Service duration. All too frequently, these conditions are not well-defifined because the application is labeled as 'high temperature'. This ambiguity is problematic when the investigation turns to new approaches for electronic packaging solutions. The objective is to develop harsh environment, electronic packaging that meets customer requirements of cost, performance, and reliability. There are a number of challenges: (1) Materials sets - solder alloys, substrate materials; (2) Manufacturing process - low to middle volumes, low defect counts, new equipment technologies; and (3) Reliability testing - requirements documents, test methods and modeling, relevant standards documents. The cost to develop and sustain renewable and non-renewable energy resources will continue to escalate within the industry. Downhole electronics can provide a very cost-effective approach for well exploration and sustainment (data logging). However, the harsh environments are a 'game-changer' in terms defining materials, assembly processes and the long-term reliability of downhole electronic systems. The system-level approach will enable the integration of each of these contributors - materials, processes, and reliability - in order to deliver cost-effective electronics that meet customer requirements.

Vianco, Paul Thomas

2011-03-01T23:59:59.000Z

498

Ariane Environment | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpenWendeGuo Feng Bio Energy Co LtdInformationAriane Environment

499

Balancing oil and environment... responsibly.  

SciTech Connect (OSTI)

Balancing Oil and EnvironmentResponsibly As the price of oil continues to skyrocket and global oil production nears the brink, pursuing unconventional oil supplies, such as oil shale, oil sands, heavy oils, and oils from biomass and coal has become increasingly attractive. Of particular significance to the American way is that our continent has significant quantities of these resources. Tapping into these new resources, however, requires cutting-edge technologies for identification, production, processing and environmental management. This job needs a super hero or two for a job of this size and proportion

Weimer, Walter C.; Teske, Lisa

2007-01-25T23:59:59.000Z

500

Environment/Health/Safety (EHS)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia NanoparticlesSmartAffects theEnvironment, Safety and Health