National Library of Energy BETA

Sample records for wilson engineering services

  1. Sandia Energy - David Wilson

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wilson Home David Wilson David Wilson Mechanical Engineer Department: Water Power Technologies wilson-david...

  2. Wilson Engineering Services, PC | Open Energy Information

    Open Energy Info (EERE)

    implementing biomass energy projects. WES guides clients successfully through the red tape required to obtain grants and low interest loans for projects such as anaerobic...

  3. Scott Wilson Oceans | Open Energy Information

    Open Energy Info (EERE)

    Wilson Oceans Jump to: navigation, search Name: Scott Wilson Oceans Place: Chesterfield, United Kingdom Zip: S30 1JF Sector: Wind energy Product: Specialist in the engineering of...

  4. Kenneth Wilson and Renormalization

    Office of Scientific and Technical Information (OSTI)

    Kenneth Wilson and Renormalization Resources with Additional Information Kenneth Wilson Courtesy A&M-Commerce 'Kenneth G. Wilson ... was part of the generation of scientists who ...

  5. Procuring Architectural and Engineering Services for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability...

  6. Ynfiniti Engineering Services International | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar, Wind energy Product: Company that specializes in the installation and maintenance of wind farms and solar plants. References: Ynfiniti Engineering Services...

  7. Facilities & Engineering Services | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facilities & Engineering Services The Facilities Services Group (FSG) is responsible for the facilities and infrastructure of the Ames Laboratory. The group includes custodial staff, craft personnel and engineering staff. The departmental office is located in Room 158, Metals Development Building on the campus of Iowa State University, Ames, Iowa. The Facilities Services Group is responsible for three major research facilities (Wilhelm Hall, Spedding Hall, and the Metals Development

  8. Quest Environmental Engineering Services Inc | Open Energy Information

    Open Energy Info (EERE)

    Quest Environmental Engineering Services Inc Jump to: navigation, search Name: Quest Environmental & Engineering Services Inc Place: Clinton, New Jersey Zip: 8809 Product:...

  9. Kenneth Wilson and Renormalization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kenneth Wilson and Renormalization Resources with Additional Information Kenneth Wilson Courtesy A&M-Commerce 'Kenneth G. Wilson ... was part of the generation of scientists who revolutionized physics in the 1970s and confirmed the quantum theories of physicists from the early 20th century ... . Wilson won the 1982 Nobel Prize in physics for his development of the Renormalization Group (RG) into a central tool in physics. ... He received a doctorate from the California Institute of

  10. Fermilab Wilson Hall and Vicinity

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wilson Hall and Vicinity Wilson Hall Ramsey Auditorium Booster Linac Antiproton Source Leon M. Lederman Science Education Center...

  11. V-231: Cisco Identity Services Engine Discloses Authentication Credentials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Remote Users | Department of Energy 1: Cisco Identity Services Engine Discloses Authentication Credentials to Remote Users V-231: Cisco Identity Services Engine Discloses Authentication Credentials to Remote Users August 30, 2013 - 3:01am Addthis PROBLEM: A vulnerability was reported in Cisco Identity Services Engine. A remote user can obtain authentication credentials. PLATFORM: Cisco Identity Services Engine (ISE) 1.x ABSTRACT: A vulnerability was reported in Cisco Identity Services

  12. Voluntary Protection Program Onsite Review, Facility Engineering Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    KCP, LLC - September 2012 | Department of Energy Facility Engineering Services KCP, LLC - September 2012 Voluntary Protection Program Onsite Review, Facility Engineering Services KCP, LLC - September 2012 September 2012 Evaluation to determine whether Facility Engineering Services KCP, LLC is continuing to perform at a level deserving DOE-VPP Star recognition. The Team conducted its review during September 10-14, 2012 to determine whether Facility Engineering Services KCP, LLC is continuing

  13. Include tech service engineers in turnaround inspections

    SciTech Connect (OSTI)

    Miller, J.E.

    1987-05-01

    Process Unit startup problems can be minimized by having technical service or process engineers perform equipment turnaround inspections. Most plants have inspectors who are specifically trained to identify corrosion, fatigue and other conditions that lead to deterioration of equipment mechanical integrity. Inspectors are also concerned with the proper assembly of equipment to ensure that all construction agrees with the field drawings. Training and knowledge of how process equipment actually operates often varies among individual inspectors. This, unfortunately, can lead to process equipment performance problems after startup with equipment that is reportedly in good mechanical condition.

  14. DOE Seeks Industry Participation for Engineering Services to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Participation for Engineering Services to Design Next Generation Nuclear Plant DOE Seeks Industry ... Gen IV Reactor Capable of Producing Process Heat, Electricity andor ...

  15. V-235: Cisco Mobility Services Engine Configuration Error Lets...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-235: Cisco Mobility Services Engine Configuration Error Lets Remote Users Login ... and Local Users Gain Elevated Privileges V-076: Cisco Wireless LAN Controller Bugs Let ...

  16. V-231: Cisco Identity Services Engine Discloses Authentication...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-231: Cisco Identity Services Engine Discloses Authentication Credentials to Remote Users ... Lets Remote Users Obtain Database Contents V-076: Cisco Wireless LAN Controller Bugs Let ...

  17. Miller named VP of Engineering and Technical Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Miller-named-VP-of-Engineering-and-Technical-Services Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand...

  18. Building Energy Asset Score: Energy Services Companies, Engineers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Services Companies, Engineers and Consultants Building Energy Asset Score: Energy ... and structural energy efficiency of commercial and multifamily residential buildings. ...

  19. Procuring Architectural and Engineering Services for Energy Efficiency and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sustainability | Department of Energy Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability Procuring Architectural and Engineering Services for Energy Efficiency and Sustainability PDF icon 51367_resguidefedconsmgr.pdf More Documents & Publications Audit Report: IG-0387 Chapter 2: Whole-Buildling Design Guide to Integrating Renewable Energy in Federal Construction

  20. Systems engineering implementation plan for the liquid effluents services program

    SciTech Connect (OSTI)

    Lowe, S.S.

    1995-01-01

    A graded approach is being taken by the Liquid Effluents Services Program in implementing systems engineering because of the advanced state of the program. The approach is cost-effective and takes credit for related work already completed, yet retains the benefits of systems engineering. This plan describes how the Liquid Effluents Services Program will implement systems engineering so there is a common understanding. Systems engineering work to be performed and the products of that work are identified. The relation to the current planning process and integration with the sitewide systems engineering effort is described.

  1. Directions to Wilson Hall, Fermilab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directions Both the Fermilab box office and Ramsey Auditorium are located in Wilson Hall, the central laboratory building of Fermi National Accelerator Laboratory, as shown on the map below. Ramsey Auditorium is located at the south end of Wilson Hall. Enter through the Auditorium lobby doors on the ground level at the south end of Wilson Hall. Wilson Hall is clearly visible from the Pine Street entrance. From I-88, exit north at Farnsworth, which becomes Kirk north of Butterfield road. We also

  2. Annex II Technical Specifications Operational Systems Diagnostics Engineering Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operational Systems Diagnostics Engineering Services ITER_D_ SD8PNK v.1.3 ITER_D_SD8PNK Page 1 of 9 Table of Contents 1 PURPOSE ............................................................................................................................2 2 SCOPE .................................................................................................................................2 3 DEFINITIONS

  3. DOE Seeks Industry Participation for Engineering Services to Design Next

    Energy Savers [EERE]

    Generation Nuclear Plant | Department of Energy Participation for Engineering Services to Design Next Generation Nuclear Plant DOE Seeks Industry Participation for Engineering Services to Design Next Generation Nuclear Plant July 23, 2007 - 2:55pm Addthis Gen IV Reactor Capable of Producing Process Heat, Electricity and/or Hydrogen WASHINGTON, DC -The U.S. Department of Energy (DOE) today announced that the Idaho National Laboratory (INL) is issuing a request for expressions of interest from

  4. Building Energy Asset Score: Energy Services Companies, Engineers and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consultants | Department of Energy Energy Services Companies, Engineers and Consultants Building Energy Asset Score: Energy Services Companies, Engineers and Consultants The U.S. Department of Energy's Building Energy Asset Score is a national standardized tool for evaluating the physical and structural energy efficiency of commercial and multifamily residential buildings. The Asset Score generates a simple energy efficiency rating that enables comparison among buildings, and identifies

  5. Dr Lane Wilson | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Lane Wilson Materials Sciences and Engineering (MSE) Division MSE Home About Staff What's New Research Areas Reports and Activities Science Highlights Principal Investigators' Meetings BES Home Staff Dr. Lane Wilson Print Text Size: A A A FeedbackShare Page Wilson Program Manager X-ray Scatttering Materials Sciences and Engineering Division Office of Basic Energy Sciences SC-22.2/Germantown Building, Rm F-411 U.S. Department of Energy 1000 Independence Avenue, SW Washington, D.C. 20585-1290

  6. Mr. Joseph M. Fallon Director, Engineering Services Slater Steels Corporation

    Office of Legacy Management (LM)

    DCT i S 198? Mr. Joseph M. Fallon Director, Engineering Services Slater Steels Corporation Post Office Box 630 Fort Wayne, Indiana 46801 Dear Mr. Fallon: As you may know, the Department of Energy (DOE) is in the process of evaluating the radiological-condition of sites that were utilized by the Manhattan Engineer District (MED) and the Atomic Energy Commission (AEC) during the early years of nuclear development to determine whether they need remedial action and whether the Department has

  7. V-235: Cisco Mobility Services Engine Configuration Error Lets Remote Users

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Login Anonymously | Department of Energy 5: Cisco Mobility Services Engine Configuration Error Lets Remote Users Login Anonymously V-235: Cisco Mobility Services Engine Configuration Error Lets Remote Users Login Anonymously September 5, 2013 - 12:33am Addthis PROBLEM: A vulnerability was reported in Cisco Mobility Services Engine. A remote user can login anonymously. PLATFORM: Cisco Mobility Services Engine ABSTRACT: A vulnerability in Cisco Mobility Services Engine could allow an

  8. Wilson TurboPower | Open Energy Information

    Open Energy Info (EERE)

    search Logo: Wilson TurboPower Name: Wilson TurboPower Address: 55 Sixth Street Place: Woburn, Massachusetts Zip: 01801 Region: Greater Boston Area Sector: Efficiency Product:...

  9. Dr. David Wilson | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    David Wilson About Us Dr. David Wilson - President, Morgan State University Dr. David Wilson Dr. David Wilson, the 10th inaugurated president of Morgan State University, has a long record of accomplishments and more than 30 years of experience in higher education administration. He holds four academic degrees: a B.S. in political science and an M.S. in education from Tuskegee University; a master's in educational planning and administration from Harvard University; and a doctorate in

  10. Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Engineering Services The Network OSCARS Fasterdata IPv6 Network Network Performance Tools The ESnet Engineering Team Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Engineering Services ESnet provides interoperable, effective, reliable, and high performance network communications infrastructure, and certain

  11. Wilson and Dalton | Open Energy Information

    Open Energy Info (EERE)

    and Dalton Jump to: navigation, search Name: Wilson and Dalton Place: Dalton, GA References: NREL Press Release1 Information About Partnership with NREL Partnership with NREL Yes...

  12. All orders results for self-crossing Wilson loops mimicking double parton

    Office of Scientific and Technical Information (OSTI)

    scattering (Journal Article) | SciTech Connect All orders results for self-crossing Wilson loops mimicking double parton scattering Citation Details In-Document Search Title: All orders results for self-crossing Wilson loops mimicking double parton scattering × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize

  13. Zero point energy of renormalized Wilson loops (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Zero point energy of renormalized Wilson loops Citation Details In-Document Search Title: Zero point energy of renormalized Wilson loops The quark-antiquark potential, and its ...

  14. LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center

    SciTech Connect (OSTI)

    2010-08-12

    U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) emerging technology case study showcasing LED lighting to improve energy efficiency in parking areas at the NAVFAC Engineering Services Center.

  15. Gas engines provide cogeneration service for Fantoni MDF plant

    SciTech Connect (OSTI)

    Chellini, R.

    1996-12-01

    A large MDF (medium density fiberboard) plant recently started industrial production at the headquarters of Fantoni, in Osoppo (UDINE) Italy. Providing electric power and thermal energy to the process is a cogeneration plant based on four large spark-ignited gas engines. The new Osoppo MDF plant processes 800 m{sup 3} of finished boards per day in a manufacturing line that combines the most advanced technologies available from several European equipment manufacturers. The cogeneration plant features four type 12VA32G spark-ignited gas engines from Fincantieri`s Diesel Engine Division, driving 50Hz, 6.3 kV, 5400 kVA Ansaldo generators at 750 r/min. The turbocharged and intercooled engines are a spark-ignited version of the company`s A32 diesel. They feature 12 Vee-arranged cylinders with 320 mm bore and 390 mm stroke. 5 figs.

  16. Greg Wilson to Lead National Center for Photovoltaics - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Greg Wilson to Lead National Center for Photovoltaics November 11, 2011 Photo of Dr. Gregory M. Wilson Dr. Gregory M. Wilson has been named director of the National Center for Photovoltaics at NREL. Dr. Gregory M. Wilson has been named director of the National Center for Photovoltaics (NCPV) at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), effective Nov. 28. Wilson brings 17 years of experience in silicon research and in photovoltaic leadership to

  17. Voluntary Protection Program Onsite Review, Facility Engineering Services KCP, LLC- November 2008

    Broader source: Energy.gov [DOE]

    This report summarizes the results of the HSS DOE-VPP Team’s evaluation of Facilities Engineering Services KCP, LLC during the period of November 10-21, 2008, and provides the Chief Health, Safety and Security Officer with the necessary information to make the final decision regarding the company’s continued participation in DOE-VPP as a Star site.

  18. LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center

    Energy Savers [EERE]

    LED parking area lights at the NAVFAC Engineering Service Center at Port Hueneme provide high quality, evenly distributed light. Photo courtesy of PNNL because of its long rated life and high effciency relative to other options. However, high-pressure sodium technol- ogy is not without drawbacks, such as a low color rendition, a result of its narrow spectral distribution and low color temperature. While metal halide lamps provide whiter light and better color rendition compared to high-pressure

  19. Office of Basic Energy Sciences; Dr. Lane C. Wilson, Program Manager

    Office of Scientific and Technical Information (OSTI)

    Technical Report submitted to the Department of Energy - Office of Basic Energy Sciences; Dr. Lane C. Wilson, Program Manager Period of performance for Sept 15, 2010 - Sept 14, 2013 DOE award # DE-SC0001988 to Brown University "Optoacoustic M icroscopy for Investigation of M aterial Nanostructures - Em bracing the Ultrasm all, Ultrafast, and the Invisible" by Professors Humphrey Maris and Arto Nurmikko, Brown University Department of Physics and the School of Engineering, Providence,

  20. NLO evolution of 3-quark Wilson loop operator

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Balitsky, I.; Grabovsky, A. V.

    2015-01-07

    It is well known that high-energy scattering of a meson from some hadronic target can be described by the interaction of that target with a color dipole formed by two Wilson lines corresponding to fast quark-antiquark pair. Moreover, the energy dependence of the scattering amplitude is governed by the evolution equation of this color dipole with respect to rapidity. Similarly, the energy dependence of scattering of a baryon can be described in terms of evolution of a three-Wilson-lines operator with respect to the rapidity of the Wilson lines. We calculate the evolution of the 3-quark Wilson loop operator in themore » next-to-leading order (NLO) and present a quasi-conformal evolution equation for a composite 3-Wilson-lines operator. Thus we also obtain the linearized version of that evolution equation describing the amplitude of the odderon exchange at high energies.« less

  1. Bob Wilson and The Birth of Fermilab

    ScienceCinema (OSTI)

    Edwin L. Goldwasser

    2010-01-08

    In the 1960?s the Lawrence Berkeley Laboratory (then The Lawrence Radiation Laboratory) submitted two proposals to build the next high energy physics research laboratory. The first included a 200 GeV accelerator and associated experimental facilities. The cost was $350 million. The Bureau of the Budget rejected that proposal as a ?budget buster?. It ruled that $250 million was the maximum that could be accepted. The second proposal was for a reduced scope laboratory that met the Bureau of the Budget?s cost limitation, but it was for a lower energy accelerator and somewhat smaller and fewer experimental facilities. The powerful Congressional Joint Committee on Atomic Energy rejected the reduced scope proposal as inadequate to provide physics results of sufficient interest to justify the cost. It was then that Bob Wilson came forth with a third proposal, coping with that ?Catch 22? and leading to the creation of Fermilab. How he did it will be the subject of this colloquium.

  2. Statement of work for architect-engineer services, initial pretreatment module

    SciTech Connect (OSTI)

    Sowa, K.B.

    1994-09-15

    This Statement of Work describes the Architect-Engineer services to be provided by Raytheon/BNFL in providing a conceptual design (Contract TGW-SVV-063869) for the Initial Pretreatment Module (IPM), Project W-236B, at the Hanford site, Richland, Washington. The IPM Project, a radiochemical process facility, will be designed and constructed for an initial phase of waste pretreatment, which will be for the removal of cesium from supernatant wastes to produce a Low-level waste (LLW) stream to a vitrification facility. The design shall also accommodate side streams of High-Level Waste (HLW) fractions that will be directed to suitable, existing storage tanks where they will be recombined with an additional high-activity waste fraction generated from pretreatment of the tank waste sludges and solids. This combined high-activity waste fraction will be immobilized as glass and disposed in a geological repository.

  3. Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

    SciTech Connect (OSTI)

    Ansley, Shannon L.

    2002-02-20

    The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

  4. Wilson TurboPower Inc | Open Energy Information

    Open Energy Info (EERE)

    of heat exchanger technology that was founded to commercialise the research of Prof. David Gordon Wilson from MIT. Coordinates: 42.479195, -71.150604 Show Map Loading map......

  5. DOE - Office of Legacy Management -- Wilson Warehouse - NY 64

    Office of Legacy Management (LM)

    Wilson Warehouse - NY 64 FUSRAP Considered Sites Site: Wilson Warehouse (NY.64) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any,

  6. PPPO/DUF6 Engineering and Operations Technical Services GSA Contract...

    Office of Environmental Management (EM)

    ... and protects operations by keeping financial information confidential; Maintains ... Knowledge of fundamental nuclear, mechanical, electrical theory and engineering ...

  7. Services

    Broader source: Energy.gov [DOE]

    The Office of Management provides many of the services that keep the Department of Energy Headquarters offices operational. Other Program Offices also provide services to the employees at...

  8. Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Includes Engineering Standards Manual, Master Specifications Index, Drafting Manual, Design Guides, and more. IHS Standards Expert login information Collections include ANSI,...

  9. Audit of Bus Service Subsidies at the Idaho National Engineering Laboratory, WR-B-97-02

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AUDIT OF BUS SERVICE SUBSIDIES AT THE IDAHO NATIONAL ENGINEERING LABORATORY The Office of Inspector General wants to make the distribution of its reports as customer friendly and cost-effective as possible. Therefore, this report will be available electronically through the Internet five to seven days after publication at the following alternative addresses: Department of Energy Headquarters Gopher gopher.hr.doe.gov Department of Energy Headquarters Anonymous FTP vm1.hqadmin.doe.gov Department

  10. Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering /science-innovation/_assets/images/icon-science.jpg Engineering National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Engineering New type of laser to help defeat threats to U.S. Navy. LANL successfully tested a new high-current electron injector, a device that can be scaled up to produce the electrons needed to build a

  11. Chatfield v. Wilson, 31 Vt. 358, 262-63 (1858) | Open Energy...

    Open Energy Info (EERE)

    Chatfield v. Wilson, 31 Vt. 358, 262-63 (1858) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal CaseHearing: Chatfield v. Wilson, 31 Vt. 358, 262-63...

  12. engineering

    National Nuclear Security Administration (NNSA)

    an award last month for his 3D printing innovation. It could revolutionize additive manufacturing.

    Lawrence Livermore Lab engineer Bryan Moran wasn't necessarily...

  13. Don Cook discusses NNSA's Defense Programs at Woodrow Wilson Center |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration discusses NNSA's Defense Programs at Woodrow Wilson Center | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets

  14. Rapidity evolution of Wilson lines at the next-to-leading order

    SciTech Connect (OSTI)

    Balitsky, Ian; Chirilli, Giovanni

    2013-12-01

    At high energies particles move very fast so the proper degrees of freedom for the fast gluons moving along the straight lines are Wilson-line operators - infinite gauge factors ordered along the line. In the framework of operator expansion in Wilson lines the energy dependence of the amplitudes is determined by the rapidity evolution of Wilson lines. We present the next-to-leading order hierarchy of the evolution equations for Wilson-line operators.

  15. Services

    Broader source: Energy.gov [DOE]

    The Human Capital Office offers benefit, new employee orientation and some learning & development related services to all DOE employees. Additionally the Office supplies employee and labor...

  16. ENGINEERING

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ENGINEERING the Future of ENERGY Regional University Alliance National Energy Technology Laboratory Office of Research and Development The Future of Energy The time to redraw America's energy blueprint is now. The challenges we face today are the most critical in decades-from the impact of energy use on global ecosystems to the difficulties of efficiently harnessing our natural resources. Because energy is fundamental to human welfare, we must develop sustainable systems that make clean,

  17. Engineering High Performance Service-Oriented Pipeline Applications with MeDICi

    SciTech Connect (OSTI)

    Gorton, Ian; Wynne, Adam S.; Liu, Yan

    2011-01-07

    The pipeline software architecture pattern is commonly used in many application domains to structure a software system. A pipeline comprises a sequence of processing steps that progressively transform data to some desired outputs. As pipeline-based systems are required to handle increasingly large volumes of data and provide high throughput services, simple scripting-based technologies that have traditionally been used for constructing pipelines do not scale. In this paper we describe the MeDICI Integration Framework (MIF), which is specifically designed for building flexible, efficient and scalable pipelines that exploit distributed services as elements of the pipeline. We explain the core runtime and development infrastructures that MIF provides, and demonstrate how MIF has been used in two complex applications to improve performance and modifiability.

  18. Scientific and engineering services for the LANCE/ER accelerator production of tritium (APT) project

    SciTech Connect (OSTI)

    1994-12-05

    The APT project office is conducting a preconceptual design study for an accelerator driven concept to produce tritium. The facility will require new technology in many areas, since the scale of this accelerator is significantly larger then any in operation to date. The facility is composed of four subsystems: accelerator, target & blanket, balance of plant, and tritium purification system (TPS). New physics realms will be entered in order for the concept to be feasible; for example, extremely high energy levels of the entering protons that induce (multiplicative) spallation of the neutrons from the high Z target will occur. These are complex and require advance codes (MCNP) to predict the physics interactions and as well as deleterious material effects in the surrounding structures. Other issues include component cooling and complex thermal-hydraulics effects within the blanket and the beam {open_quotes}window.{close_quotes} In order to support a DOE mandated fast ROD schedule, Los Alamos APT staff will be provided with senior, engineering technical support staff with direct APT technology experience and whom are {open_quotes}on site{close_quotes}. This report contains resumes of the staff.

  19. PPPO/DUF6 Engineering and Operations Technical Services GSA Contract #: GS-10F-0061R Task Order #: DE-DT0005643

    Office of Environmental Management (EM)

    PPPO/DUF6 Engineering and Operations Technical Services GSA Contract #: GS-10F-0061R Task Order #: DE-DT0005643 B-1 PART 1 - THE SCHEDULE SECTION B SUPPLIES OR SERVICES PRICES / COST B.1 TYPE OF CONTRACT/ ITEMS BEING ACQUIRED ...................................................... B-2 B.2 DOE-B-1007 DELIVERABLE REQUIREMENTS - TIME & MATERIALS/LABOR HOURS................................................................................................B-2 B.3 OBLIGATION AND AVAILABILITY OF FUNDS

  20. WILSON-BAPPU EFFECT: EXTENDED TO SURFACE GRAVITY

    SciTech Connect (OSTI)

    Park, Sunkyung; Kang, Wonseok; Lee, Jeong-Eun; Lee, Sang-Gak E-mail: wskang@khu.ac.kr E-mail: sanggak@snu.ac.kr

    2013-10-01

    In 1957, Wilson and Bappu found a tight correlation between the stellar absolute visual magnitude (M{sub V} ) and the width of the Ca II K emission line for late-type stars. Here, we revisit the Wilson-Bappu relationship (WBR) to claim that the WBR can be an excellent indicator of stellar surface gravity of late-type stars as well as a distance indicator. We have measured the width (W) of the Ca II K emission line in high-resolution spectra of 125 late-type stars obtained with the Bohyunsan Optical Echelle Spectrograph and adopted from the Ultraviolet and Visual Echelle Spectrograph archive. Based on our measurement of the emission line width (W), we have obtained a WBR of M{sub V} = 33.76 - 18.08 log W. In order to extend the WBR to being a surface gravity indicator, stellar atmospheric parameters such as effective temperature (T{sub eff}), surface gravity (log g), metallicity ([Fe/H]), and micro-turbulence ({xi}{sub tur}) have been derived from self-consistent detailed analysis using the Kurucz stellar atmospheric model and the abundance analysis code, MOOG. Using these stellar parameters and log W, we found that log g = -5.85 log W+9.97 log T{sub eff} - 23.48 for late-type stars.

  1. BEW Engineering | Open Energy Information

    Open Energy Info (EERE)

    Services Product: BEW Engineering provides engineering consulting services, and performs research and development in electrical power systems for bulk power and distributed energy...

  2. Products and Services Purchased | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    waste management services Professional and administrative services Engineering support services Research & development Information technology Construction materials and services...

  3. Aircraft gas-turbine engines: Noise reduction and vibration control. (Latest citations from Information Services in Mechanical Engineering data base). Published Search

    SciTech Connect (OSTI)

    Not Available

    1992-06-01

    The bibliography contains citations concerning the design and analysis of aircraft gas turbine engines with respect to noise and vibration control. Included are studies regarding the measurement and reduction of noise at its source, within the aircraft, and on the ground. Inlet, nozzle and core aerodynamic studies are cited. Propfan, turbofan, turboprop engines, and applications in short take-off and landing (STOL) aircraft are included. (Contains a minimum of 202 citations and includes a subject term index and title list.)

  4. Dabbrook Services | Open Energy Information

    Open Energy Info (EERE)

    Services Jump to: navigation, search Name: Dabbrook Services Place: Great Yarmouth, United Kingdom Zip: NR31 6PT Sector: Services Product: Provides design and engineering...

  5. QCD at nonzero density and canonical partition functions with Wilson fermions

    SciTech Connect (OSTI)

    Alexandru, Andrei; Wenger, Urs

    2011-02-01

    We present a reduction method for Wilson-Dirac fermions with nonzero chemical potential which generates a dimensionally reduced fermion matrix. The size of the reduced fermion matrix is independent of the temporal lattice extent and the dependence on the chemical potential is factored out. As a consequence the reduced matrix allows a simple evaluation of the Wilson fermion determinant for any value of the chemical potential and hence the exact projection to the canonical partition functions.

  6. Secretary Moniz's Remarks at the Wilson Center on the "2015 U.S. Energy

    Energy Savers [EERE]

    Policy Outlook: Opportunities and Challenges" -- As Delivered | Department of Energy at the Wilson Center on the "2015 U.S. Energy Policy Outlook: Opportunities and Challenges" -- As Delivered Secretary Moniz's Remarks at the Wilson Center on the "2015 U.S. Energy Policy Outlook: Opportunities and Challenges" -- As Delivered January 7, 2015 - 11:30am Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy Thanks, Jane, for the introduction. I interpret

  7. Meadville, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    district.12 Registered Energy Companies in Meadville, Pennsylvania Wilson Engineering Services, PC References US Census Bureau Incorporated place and minor...

  8. Voluntary Protection Program Onsite Review, Facility Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Engineering Services KCP, LLC - September 2012 Voluntary Protection Program Onsite Review, Facility Engineering Services KCP, LLC - September 2012 September 2012 ...

  9. Shafir Civil Marine Engineering | Open Energy Information

    Open Energy Info (EERE)

    Engineering Jump to: navigation, search Name: Shafir Civil & Marine Engineering Place: Israel Sector: Services Product: Services include infrastructure works, contracting, bridge...

  10. Calypso Engineering Srl | Open Energy Information

    Open Energy Info (EERE)

    Calypso Engineering Srl Jump to: navigation, search Name: Calypso Engineering Srl Place: Albino, Italy Sector: Services, Wind energy Product: Develops and provides engineering...

  11. All orders results for self-crossing Wilson loops mimicking double parton

    Office of Scientific and Technical Information (OSTI)

    scattering (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: All orders results for self-crossing Wilson loops mimicking double parton scattering Citation Details In-Document Search Title: All orders results for self-crossing Wilson loops mimicking double parton scattering Authors: Dixon, Lance J. ; /SLAC /Caltech ; Esterlis, Ilya ; /SLAC Publication Date: 2016-02-05 OSTI Identifier: 1237021 Report Number(s): SLAC-PUB-16467 arXiv:1602.02107 DOE Contract

  12. Wilson-line and color charge density correlators and the production of

    Office of Scientific and Technical Information (OSTI)

    {eta}{sup '} in the color glass condensate for pp and pA collisions (Journal Article) | SciTech Connect Wilson-line and color charge density correlators and the production of {eta}{sup '} in the color glass condensate for pp and pA collisions Citation Details In-Document Search Title: Wilson-line and color charge density correlators and the production of {eta}{sup '} in the color glass condensate for pp and pA collisions We compute the inclusive differential cross section production of the

  13. Secretary Moniz Opening Remarks at the Wilson Center: "Iran's Nuclear

    Energy Savers [EERE]

    Agreement"-- As Delivered | Department of Energy Opening Remarks at the Wilson Center: "Iran's Nuclear Agreement"-- As Delivered Secretary Moniz Opening Remarks at the Wilson Center: "Iran's Nuclear Agreement"-- As Delivered February 2, 2016 - 12:00pm Addthis Dr. Ernest Moniz Dr. Ernest Moniz Secretary of Energy SECRETARY ERNEST MONIZ: Today what we're going to focus on is basically nuclear materials. And I would just put that in the context that President Obama, in

  14. DICE Diagnostic Service Joe Metzger

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    processes to support the services... Provide user interfaces and training to our NOC engineers so they can effectively use these services for diagnosing performance...

  15. Engineering Technician

    Broader source: Energy.gov [DOE]

    Alternate Title(s):Civil Engineering Technician; Electrical Engineering Technician; Mechanical Engineering Technician; Environmental Engineering Technician

  16. Aecom Government Services AGS | Open Energy Information

    Open Energy Info (EERE)

    Zip: 76102 Sector: Renewable Energy, Services Product: Texas-based government services arm of AECOM. The entity offers engineering services to the renewable energy sector....

  17. BNL Technical Services Awarded Service-Disabled Veteran-Owned Small

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business of the Year | Department of Energy BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year October 1, 2014 - 10:39am Addthis DOE Chief of Staff Kevin Knobloch (l) and DOE OSDBU Director John Hale III (r) present Service-Disabled Veteran-Owned Small Business of the Year to BNL Tech President and Chief Financial Officer Wilson Stevenson and BNL Tech Chief Executive

  18. Applied Process Engineering Laborotory APEL | Open Energy Information

    Open Energy Info (EERE)

    Engineering Laborotory (APEL) Place: United States Sector: Services Product: General Financial & Legal Services ( Private family-controlled ) References: Applied Process...

  19. Ruby Canyon Engineering Inc | Open Energy Information

    Open Energy Info (EERE)

    Ruby Canyon Engineering Inc Jump to: navigation, search Name: Ruby Canyon Engineering Inc Place: Grand Junction, Colorado Zip: 81506 Sector: Services Product: String representation...

  20. Tecno Proget Engineering | Open Energy Information

    Open Energy Info (EERE)

    Name: Tecno Proget Engineering Place: Ragusa, Italy Zip: 97100 Sector: Solar Product: Italian engineering and construction service firm, building a solar plant in Santa Croce...

  1. Web Service Interface (API)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Interface (API) Engineering Services The Network OSCARS How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) Read More... Fasterdata IPv6 Network Network Performance Tools The ESnet Engineering Team Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  2. Dennis Wilson

    Broader source: Energy.gov [DOE]

    Dennis lives in Rockwood and is a retired technology manager, who most recently was employed by Johnson-Diversey Products as the director of technology and intellectual property. While much of his...

  3. Reciprocating Engines in Support of Grid Modernization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Natural Gas Reciprocating Engines Lean Burn Rich Burn GE (Waukesha, Jenbacher), ... Grid Services - CAISO Grid Service Description NG Recips Frequency Regulation >500kW, max ...

  4. Seeger Engineering AG | Open Energy Information

    Open Energy Info (EERE)

    AG Jump to: navigation, search Name: Seeger Engineering AG Place: Hessisch Lichtenau, Hessen, Germany Zip: 37235 Sector: Biomass, Services Product: Services range from project...

  5. Non-local order in Mott insulators, duality and Wilson loops

    SciTech Connect (OSTI)

    Rath, Steffen Patrick; Simeth, Wolfgang; Endres, Manuel; Zwerger, Wilhelm

    2013-07-15

    It is shown that the Mott insulating and superfluid phases of bosons in an optical lattice may be distinguished by a non-local parity order parameter which is directly accessible via single site resolution imaging. In one dimension, the lattice Bose model is dual to a classical interface roughening problem. We use known exact results from the latter to prove that the parity order parameter exhibits long range order in the Mott insulating phase, consistent with recent experiments by Endres et al. [M. Endres, M. Cheneau, T. Fukuhara, C. Weitenberg, P. Schau, C. Gross, L. Mazza, M.C. Bauls, L. Pollet, I. Bloch, et al., Science 334 (2011) 200]. In two spatial dimensions, the parity order parameter can be expressed in terms of an equal time Wilson loop of a non-trivial U(1) gauge theory in 2+1 dimensions which exhibits a transition between a Coulomb and a confining phase. The negative logarithm of the parity order parameter obeys a perimeter law in the Mott insulator and is enhanced by a logarithmic factor in the superfluid. -- Highlights: Number statistics of cold atoms in optical lattices show non-local correlations. These correlations are measurable via single site resolution imaging. Incompressible phases exhibit an area law in particle number fluctuations. This leads to long-range parity order of Mott-insulators in one dimension. Parity order in 2d is connected with a Wilson-loop in a lattice gauge theory.

  6. Career Map: Civil Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Civil Engineer Career Map: Civil Engineer A civil engineer wearing a safety vest and hard hat stands in front of a wind turbine. Civil Engineer Position Title Civil Engineer Alternate Title(s) Engineer Education & Training Level Bachelors required, prefer graduate degree Education & Training Level Description Civil engineers need a bachelor's degree. They typically need a graduate degree for promotion to managerial positions. Civil engineers who sell their own services publicly must be

  7. Electronics Engineer- OPEN CONTINUOUS ANNOUNCEMENT

    Broader source: Energy.gov [DOE]

    This recruitment is an OPEN CONTINUOUS ANNOUNCEMENT (OCA) being utilized to fill current and future Electrical Engineer vacancies within BPA's Transmission Field Services organization. Positions...

  8. Electrical Engineer- OPEN CONTINUOUS ANNOUNCEMENT

    Broader source: Energy.gov [DOE]

    This recruitment is an OPEN CONTINUOUS ANNOUNCEMENT (OCA) being utilized to fill current and future Electrical Engineer vacancies within BPA's Transmission Field Services organization. Positions...

  9. Student Trainee (General Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in Power Services (P) of the Bonneville Power Administration (BPA). The position involves periods of pertinent formal education and periods of employment in an engineering...

  10. QCD Condensates and Holographic Wilson Loops for Asymptotically AdS Spaces

    SciTech Connect (OSTI)

    Quevedo, R. Carcasses; Goity, Jose L.; Trinchero, Roberto C.

    2014-02-01

    The minimization of the Nambu-Goto (NG) action for a surface whose contour defines a circular Wilson loop of radius a placed at a finite value of the coordinate orthogonal to the border is considered. This is done for asymptotically AdS spaces. The condensates of dimension n = 2, 4, 6, 8, and 10 are calculated in terms of the coefficients in the expansion in powers of the radius a of the on-shell subtracted NG action for small a->0. The subtraction employed is such that it presents no conflict with conformal invariance in the AdS case and need not introduce an additional infrared scale for the case of confining geometries. It is shown that the UV value of the gluon condensates is universal in the sense that it only depends on the first coefficients of the difference with the AdS case.

  11. Service Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    Service Characteristics by Activity... Service Service buildings are those in which some type of service is provided, other than food service or retail sales of goods. Basic...

  12. Solar Engineering Decker Mack GmbH | Open Energy Information

    Open Energy Info (EERE)

    Engineering Decker Mack GmbH Jump to: navigation, search Name: Solar Engineering Decker & Mack GmbH Place: Hannover, Germany Zip: 30165 Sector: Services, Solar Product: Firm...

  13. Energy Control Systems Engineering Inc | Open Energy Information

    Open Energy Info (EERE)

    Control Systems Engineering Inc Jump to: navigation, search Name: Energy Control Systems Engineering Inc Place: Monrovia, California Zip: 91016 Sector: Services Product: The...

  14. Service Academies Research Associates

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internships » SARA /collaboration/internships/service-academy-research-associates/_assets/images/banner-img.png Service Academies Research Associates Military academies come to Los Alamos for a summer of science. October 9, 2015 West Point cadets at the National Security Science Building at Los Alamos National Laboratory. Contact Jonathan S. Ventura Email SARA interns use science and engineering to meet challenges to national security. SARA: not what you'd expect Through the Service Academies

  15. Cold nuclear fusion and muon-catalyzed fusion. (Latest citations from the INSPEC: Information services for the Physics and Engineering Communities data base). Published Search

    SciTech Connect (OSTI)

    Not Available

    1992-10-01

    The bibliography contains citations concerning a nuclear fusion process which occurs at lower temperatures and pressures than conventional fusion reactions. The references describe theoretical and experimental results for a proposed muon-catalyzed fusion reactor, and for studies on muon sticking and reactivation. The temperature dependence of fusion rates, and resolution of some engineering challenges are also discussed. (Contains 250 citations and includes a subject term index and title list.)

  16. Global Energy Services formerly Gamesa Energia Servicios | Open...

    Open Energy Info (EERE)

    Energy, Services Product: A Spanish-based operator in engineering, installation and maintenance services for the electricity, petrochemical and renewable energies sector....

  17. Daewoo Engineering Company | Open Energy Information

    Open Energy Info (EERE)

    service provider offering R&D, engineering, design, procurement, construction, and project management; involved in building a 3MW solar power plant in South Jeolla....

  18. Reliability Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LA-UR 15-27450 This document is approved for public release; further dissemination unlimited Reliability Engineering Reliability Engineering Current practice in reliability is ...

  19. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Waste Management Waste Management EM is dedicated to safely disposing of waste and seeks cost effective and environmentally responsible project execution methods. Read more Site & Facility Restoration Site & Facility Restoration EM provides integration, planning and analysis for all soil and groundwater remediation, deactivation and decommissioning (D&D) and facility engineering. This work includes sustainability projects to ensure that these activities are

  20. Engineering Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education Opportunities » Engineering Institute Engineering Institute Engineering dynamics that include flight, vibration isolation for precision manufacturing, earthquake engineering, blast loading, signal processing, and experimental model analysis. Contact Leader, LANL Charles Farrar Email Leader, UCSD Michael Todd Email LANL Program Administrator Jutta Kayser (505) 663-5649 Email Administrative Assistant Stacy Baker (505) 663-5233 Email Collaboration for conducting mission-driven,

  1. Shockwave Engine: Wave Disk Engine

    SciTech Connect (OSTI)

    2010-01-14

    Broad Funding Opportunity Announcement Project: MSU is developing a new engine for use in hybrid automobiles that could significantly reduce fuel waste and improve engine efficiency. In a traditional internal combustion engine, air and fuel are ignited, creating high-temperature and high-pressure gases which expand rapidly. This expansion of gases forces the engines pistons to pump and powers the car. MSUs engine has no pistons. It uses the combustion of air and fuel to build up pressure within the engine, generating a shockwave that blasts hot gas exhaust into the blades of the engines rotors causing them to turn, which generates electricity. MSUs redesigned engine would be the size of a cooking pot and contain fewer moving partsreducing the weight of the engine by 30%. It would also enable a vehicle that could use 60% of its fuel for propulsion.

  2. Stirling engines

    SciTech Connect (OSTI)

    Reader, G.T.; Hooper

    1983-01-01

    The Stirling engine was invented by a Scottish clergyman in 1816, but fell into disuse with the coming of the diesel engine. Advances in materials science and the energy crisis have made a hot air engine economically attractive. Explanations are full and understandable. Includes coverage of the underlying thermodynamics and an interesting historical section. Topics include: Introduction to Stirling engine technology, Theoretical concepts--practical realities, Analysis, simulation and design, Practical aspects, Some alternative energy sources, Present research and development, Stirling engine literature.

  3. Report of a workshop on nuclear forces and nonproliferation Woodrow Wilson international center for scholars, Washington, DC October 28, 2010

    SciTech Connect (OSTI)

    Pilat, Joseph F

    2010-12-08

    A workshop sponsored by the Los Alamos National Laboratory in cooperation with the Woodrow Wilson International Center for Scholars was held at the Wilson Center in Washington, DC, on October 28, 2010. The workshop addressed evolving nuclear forces and their impacts on nonproliferation in the context of the new strategic environment, the Obama Administration's Nuclear Posture Review and the 2010 NPT Review Conference. The discussions reflected the importance of the NPR for defining the role of US nuclear forces in dealing with 21st century threats and providing guidance for National Nuclear Security Administration (NNSA) and Department of Defense (DoD) programs and, for many but not all participants, highlighted its role in the successful outcome of the NPT RevCon. There was widespread support for the NPR and its role in developing the foundations for a sustainable nuclear-weapon program that addresses nuclear weapons, infrastructure and expertise in the broader nonproliferation, disarmament and international security contexts. However, some participants raised concerns about its implementation and its long-term effectiveness and sustainability.

  4. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services shutterstock_106609430_jpg.jpg

  5. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-12-30

    To establish Department of Energy (DOE) value engineering policy that establishs and maintains cost-effective value procedures and processes.

  6. Engineered High Energy Crop (EHEC) Programs

    Office of Environmental Management (EM)

    THIS PAGE INTENTIONALLY LEFT BLANK Engineered High Energy Crop Programs Final Programmatic Environmental Impact Statement DOE/EIS-0481 JULY 2015 THIS PAGE INTENTIONALLY LEFT BLANK Engineered High Energy Crop Programs Final PEIS Responsible Federal Agency: U.S. Department of Energy, Advanced Research Projects Agency-Energy Cooperating Agencies: U.S. Department of Agriculture, Animal and Plant Health Inspection Service; U.S. Department of Agriculture, Forest Service Title: Engineered High Energy

  7. Engineered Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Engineered Materials Materials design, fabrication, assembly, and characterization for national security needs. Contact Us Group Leader Ross Muenchausen Email Deputy Group Leader Dominic Peterson Email Group Office (505)-667-6887 We perform polymer science and engineering, including ultra-precision target design, fabrication, assembly, characterization, and field support. We perform polymer science and engineering, including ultra-precision target design, fabrication, assembly,

  8. EnergyCS Inc Energy Control Systems Engineering Inc | Open Energy...

    Open Energy Info (EERE)

    EnergyCS Inc Energy Control Systems Engineering Inc Jump to: navigation, search Name: EnergyCS Inc (Energy Control Systems Engineering, Inc) Sector: Services Product: String...

  9. General Engineers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General Engineers The U.S. Energy Information Administration (EIA) within the Department of Energy has forged a world-class information program that stresses quality, teamwork, and employee growth. In support of our program, we offer a variety of profes- sional positions, including the General Engineer, whose work is associated with analytical studies and evaluation projects pertaining to the operations of the energy industry. Responsibilities: General Engineers perform or participate in one or

  10. Engineering Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute Engineering Institute Multidisciplinary engineering research that integrates advanced modeling and simulations, novel sensing systems and new developments in information technology. May 14, 2013 Los Alamos Research Park Los Alamos Research Park, the home of Engineering Institute Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) 534-5951 Executive Administrator Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505)

  11. Electrical Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Power System Operation Operations Engineering, (J4200) 5555...

  12. Rotary engine

    SciTech Connect (OSTI)

    Leas, A. M.; Leas, L. E.

    1985-02-12

    Disclosed are an engine system suitable for use with methyl alcohol and hydrogen and a rotary engine particularly suited for use in the engine system. The rotary engine comprises a stator housing having a plurality of radially directed chamber dividers, a principal rotor, a plurality of subordinate rotors each having an involute gear in its periphery mounted on the principal rotor, and means for rotating the subordinate rotors so that their involute gears accept the radially directed dividers as the subordinate rotors move past them.

  13. Naval Station Newport Wind Resource Assessment. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites, and The Naval Facilities Engineering Service Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Naval Station Newport Wind Resource Assessment A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites, and The Naval Facilities Engineering Service Center Robi Robichaud, Jason Fields, and Joseph Owen Roberts Technical Report NREL/TP-6A20-52801 February 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency &

  14. water service provider

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    service provider - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear

  15. Cloud Computing Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Services - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  16. ARMY SERVICE FORCES

    Office of Legacy Management (LM)

    ARMY SERVICE FORCES ' -, 1 MANHATTAN ENGINEER DISTRICT --t 4 IN "LPLI RC,' LR io EIDM CIS INTELLIGENCE AND SECURITY DIVISION CHICAGO BRANCH OFFICE i ., -,* - P. 0. Box 6770-A I ' 1 .' CHICAGO 80. ILLINOIS /lvb 15 February 1945 Subject: shipment Security Survey at &Uinckrodt Chemical Works. MEMORANDUM to the Officer in Charge. 1. The Mallinckrodt Chemical Works, St. Louis, Missouri, was contacted by the undersigned on 16 November 1944, for the purpose of -king an investigation to

  17. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Contact User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment...

  18. Institute of Power Engineering (IEn) | Open Energy Information

    Open Energy Info (EERE)

    Name: Institute of Power Engineering (IEn) Place: Warsaw, Poland Sector: Biomass, Carbon, Efficiency, Hydrogen, Renewable Energy, Services Number of Employees: 501-1000 Year...

  19. Beijing Full Three Dimension Power Engineering Co Ltd FTD | Open...

    Open Energy Info (EERE)

    Power Engineering Co Ltd (FTD) Place: Beijing, Beijing Municipality, China Zip: 100080 Product: A steam turbine design and refurbishment service provider. Focus on technical...

  20. Electrical Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration, Corporate Services Office, Transmission Asset Planning and Management Office,...

  1. Thermoacoustic engines

    SciTech Connect (OSTI)

    Swift, G.W.

    1988-10-01

    Thermoacoustic engines, or acoustic heat engines, are energy-conversion devices that achieve simplicity and concomitant reliability by use of acoustic technology. Their efficiency can be a substantial fraction of Carnot's efficiency. In thermoacoustic prime movers, heat flow from a high-temperature source to a low-temperature sink generates acoustic power (which may be converted to electric power using a transducer). In thermoacoustic heat pumps and refrigerators, acoustic power is used to pump heat from a low-temperature source to a high-temperature sink. This review teaches the fundamentals of thermoacoustic engines, by analysis, intuition, and example.

  2. Cummins Engine Company B5.9 Propane Engine Development, Certification, and Demonstration Project

    SciTech Connect (OSTI)

    The ADEPT Group, Inc.

    1998-12-18

    The objective of this project was to successfuly develop and certify an LPG-dedicated medium-duty original equipment manufacturer (OEM) engine that could be put into production. The engine was launched into production in 1994, and more than 800 B5.9G engines are now in service in the United States and abroad. This engine is now offered by more than 30 bus and truck OEMs.

  3. Transport properties and Kondo correlations in nanostructures: Time-dependent DMRG method applied to quantum dots coupled to Wilson chains

    SciTech Connect (OSTI)

    Dias Da Silva, Luis G; Heidrich-Meisner, Fabian; Feiguin, Adrian E; Busser, C. A.; Martins, G. B.; Anda, E. V.; Dagotto, Elbio R

    2008-01-01

    We apply the adaptive time-dependent density-matrix renormalization-group method tDMRG to the study of transport properties of quantum-dot systems connected to metallic leads. Finite-size effects make the usual tDMRG description of the Kondo regime a numerically demanding task. We show that such effects can be attenuated by describing the leads by Wilson chains, in which the hopping matrix elements decay exponentially away from the impurity tn n/2. For a given system size and in the linear-response regime, results for 1 show several improvements over the undamped =1 case: perfect conductance is obtained deeper in the strongly interacting regime and current plateaus remain well defined for longer time scales. Similar improvements were obtained in the finite-bias regime up to bias voltages of the order of the Kondo temperature. These results show that with the proposed modification, the tDMRG characterization of Kondo correlations in the transport properties can be substantially improved, while it turns out to be sufficient to work with much smaller system sizes. We discuss the numerical cost of this approach with respect to the necessary system sizes and the entanglement growth during the time evolution.

  4. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L. (Livermore, CA)

    2009-10-20

    A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

  5. Civil Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Desert Southwest Region Engineering and Construction (G5600) 615 S. 43rd Avenue...

  6. Civil Engineer

    Broader source: Energy.gov [DOE]

    This announcement is open to Recent Graduates who have graduated within the last two years with a bachelor's degree in Civil Engineering and meet the requirements listed under the Qualifications...

  7. General Engineer

    Broader source: Energy.gov [DOE]

    The Department of Energy Office of Fossil Energy, Office of Petroleum Reserves (OPR), Planning and Engineering Office (DOE-FE) provides long-range planning for the Petroleum Reserves (PR) Program;...

  8. Combustion Engine

    Broader source: Energy.gov [DOE]

    Pictured here is an animation showing the basic mechanics of how an internal combustion engine works. With support from the Energy Department, General Motors researchers developed a new technology ...

  9. Reliability Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LA-UR 15-27450 This document is approved for public release; further dissemination unlimited Reliability Engineering Reliability Engineering Current practice in reliability is often fragmented, does not cover the full system lifecycle * Reliability needs to be addressed in design, development, and operational life * Reliability analysis should integrate information from components and systems Integrate proven reliability methods with world-class statistical science * Use methods and tools

  10. microbial engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    microbial engineering - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  11. Chemical Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear

  12. Engine Combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engine Combustion - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  13. WORKSHOP: MATERIALS FOR HARSH SERVICE CONDITIONS, NOVEMBER 19-20

    Broader source: Energy.gov [DOE]

    The physical limitations of materials in demanding environments have long constrained engineers in the design of innovative products and technologies. Aggressive service environments can involve...

  14. LACED Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services LACED Services The expertise, capabilities, and facilities at Los Alamos enable use to provide a full suite of services that caters to countering explosive threats. v At LACED, we believe that technological knowhow is best leveraged through top-tier industrial partners, federal agencies, and academic institutions. LACED offers a variety of partnering mechanisms that enable access to federally developed technologies and R&D capabilities. If you have a complex problem related to

  15. Service Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Forms Beamtime Request Form Deposition Request Form Exposure Request Form - pdf Fly Cutting Request Form Hot Embossing Request Form Metrology Request Form...

  16. Consulting Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that causes error conditions IO optimization effective use of compilers advising on best strategies for porting code User Services staff members work closely with vendors to...

  17. PIA - HS Web Services (HSWS) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HS Web Services (HSWS) PIA - HS Web Services (HSWS) PIA - HS Web Services (HSWS) PDF icon PIA - HS Web Services (HSWS) More Documents & Publications PIA - INL PeopleSoft - Human Resource System PIA - Human Resources - Personal Information Change Request - Idaho National Engineering Laboratory PIA - INL Education Programs Business Enclave

  18. Rotary engine

    SciTech Connect (OSTI)

    Meyman, U.

    1987-02-03

    A rotary engine is described comprising: two covers spaced from one another; rotors located between the covers and rotating and planetating in different phases; the rotors interengaging to form working chambers therebetween; means to supply fluid to the working chambers and means to exhaust fluid from the working chambers during the operating cycle of the engine; gearing for synchronizing rotation and planetation of the rotors and each including first and second gears arranged so that one of the gears is connected with the rotors while the other of the gears is connected with an immovable part of the engine and the gears engage with one another; carriers interconnecting the rotors and planetating in the same phase with the planetation of the rotors for synchronizing the rotation and planetation of the rotors; shafts arranged to support the carriers during their planetations; and elements for connecting the covers with one another.

  19. DOE Awards Support Service Contract

    Broader source: Energy.gov [DOE]

    Cincinnati - The U.S. Department of Energy (DOE) announced an award today which was made under the National Nuclear Security Administration (NNSA)’s Technical, Engineering, and Programmatic Support Services (TEPS) Blanket Purchase Agreement (BPA) DE-NA0001224 to Link Technologies, Inc., of Germantown, MD.

  20. Harmonic engine

    DOE Patents [OSTI]

    Bennett, Charles L.; Sewall, Noel; Boroa, Carl

    2014-08-19

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

  1. Value Engineering

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-01-07

    To establish Department of Energy (DOE) value engineering policy that meets the requirements of Public Law 104-106, Section 4306 as codified by 41 United States Code 432. Canceled by DOE N 251.94. Does not cancel other directives.

  2. The state of the energy service company today

    SciTech Connect (OSTI)

    Mozzo, M.A. Jr.

    1998-10-01

    Energy service companies have been around for several years. Every year, experts predict their demise. The traditional energy service company (ESCo), whose work utilizes utility rebates, will probably be long gone as rebates disappear. The new energy service company will arise in this industry. This new company will be one that can provide a vast menu of services to their customers. These services can include, but are not necessarily limited to, the following: (1) corporate energy management services, (2) natural gas transportation services, (3) electrical deregulation services, (4) energy engineering services, (5) economics and forecasting, and (6) project financing. The new energy service company must have the engineering, financial, and managerial resources and skills to provide these services. It must also have the ability to recognize the needs of a changing industry and adapt to these changes in order to survive and ultimately provide a benefit to society.

  3. ESnet's LHCONE Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ESnet's LHCONE Service March 23 rd 2015 Presented by Jason Zurawski, zurawski@es.net Science Engagement Authored by Joe Metzger metzger@es.net Network Engineering What is LHCONE? LHCONE is a Global Science Overlay Network designed for high performance science workflows and dedicated to the HEP community. * LHCONE provides access to HEP Computing Resources at: * LHC Tier 1, and Tier 2 and Tier 3 Centers * Belle II Tier 1 Centers (KEK & PNNL) and Tier 2 centers * Non-science resources are NOT

  4. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users...

  5. Instrumentation & Controls Electrical Engineer | Princeton Plasma Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Instrumentation & Controls Electrical Engineer Department: Engineering Supervisor(s): Tim Stevenson Staff: EM 4 Requisition Number: 151018 Provides general Electrical Engineering, instrumentation and controls, and technical operations support and assistance on complicated and varying Torus Systems, electrical and mechanical systems, water, vacuum, and bakeout systems and their services. Apply knowledge of controls, instrumentation, software, hardware, and computing systems to support

  6. Rotary engine

    SciTech Connect (OSTI)

    Fawcett, S.L.

    1987-03-03

    In an internal combustion engine, external heat engine, heat pump, gaseous expander, pump or gas compressor, the combustion is described including means forming a cylindrical working chamber having intake and exhaust port means for gases, and two pistons having an arcuate length within the range of 90/sup 0/ to 120/sup 0/ of the cylindrical portion of the working chamber to move toward and away from each other for compression and expansion of gases by rotation on separate concentrically-arranged shafts. A seal means is carried by the walls of the cylindrical working chamber at each of spaced apart locations to continuously form a gas sealing relation with both of the pistons while the pistons rotate toward and away from each other in the cylindrical working chamber.

  7. Rotary engine

    SciTech Connect (OSTI)

    Larson, T. G.

    1985-10-22

    The rotary engine has a circumferential main chamber and at least one smaller combustion chamber spaced from the main chamber. The rotor includes a plurality of radially-projecting sealing members in spaced relationship thereabout for maintaining a fluid-sealed condition along a single fixed transverse strip area on the interior surface of the main chamber. A single radially-oriented axially-parallel piston vane is also carried by the rotor and moves through the fixed strip area of the main chamber at each revolution of the rotor. Plural passages for intake, compression, expansion, and exhaust are ported into the main chamber at locations proximate to the fixed strip area. Valve means in the passages selectively open and close the same for a cycle of engine operation involving intake, compression, burning, and exhaust.

  8. Advanced Reciprocating Engine Systems

    Broader source: Energy.gov [DOE]

    The Advanced Reciprocating Engine Systems (ARES) program is designed to promote separate but parallel engine development between the major stationary, gaseous fueled engine manufacturers in the...

  9. Wilson_1973.pdf

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  10. Systems Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced Nuclear Energy Nuclear

  11. Rotary engine

    SciTech Connect (OSTI)

    Fawcett, S.L.

    1988-02-09

    In an internal combustion engine, external heat engine, heat pump, gaseous expander, pump or gas compressor, the combination is described including means forming a cylindrical working chamber communicating with intake and exhaust port means for gases, two pistons having an arcuate length within the range of 90/sup 0/ to 120/sup 0/ of the cylindrical surface of the working chamber. The pistons are movable toward and away from each other for compression and expansion of gases in the working chamber while separately rotating concentrically-arranged shafts, a drive shaft, three sets of gearing for connecting the pistons to the drive shaft, a first set of the gearing drivingly coupled to a first of the separate concentric shafts, a second set of the gearing drivingly coupled to a second of the concentric shaft, and a third set of the gearing comprising non-circular gears. The drive shaft is secured to one gear of each of the first, second and third gear sets of gearing for rotating the drive shaft with a substantially constant velocity and torque output throughout the several phases of the working cycle of the engine, compressor or pump.

  12. General Engineer (Marine & Hydrokinetic Engineer) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engineer) General Engineer (Marine & Hydrokinetic Engineer) Submitted by admin on Sat, 2016-01-16 00:16 Job Summary Organization Name Department Of Energy Agency SubElement...

  13. Engineering Evaluation/Cost Analysis

    Office of Environmental Management (EM)

    PPPO/03-0145&D2 Engineering Evaluation/Cost Analysis for Group 1 Buildings X-103, X-334, and X-344B at the Portsmouth Gaseous Diffusion Plant, Piketon, Ohio This document has been approved for public release: Henry H. Thomas (signature on file) 10/29/10 Classification & Information Control Officer Date Restoration Services, Inc. (RSI) contributed to the preparation of this document and should not be considered an eligible contractor for its review DOE/PPPO/03-0145&D2 Engineering

  14. HCCI in a Variable Compression Ratio Engine: Effects of Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in a Variable Compression Ratio Engine: Effects of Engine Variables HCCI in a Variable Compression Ratio Engine: Effects of Engine Variables 2004 Diesel Engine Emissions Reduction ...

  15. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Author Guidelines User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address

  16. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  17. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  18. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  19. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  20. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  1. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  2. 2010-12-1-DICE-Diagnostic-Service-Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Editor: Joe Metzger Status: DRAFT (v1.0) Date: 2010-12-1 1 General Service Description for DICE Network Diagnostic Services The DICE collaboration network diagnostic service will simplify the process of debugging, isolating, and correcting multi-domain network performance problems. The diagnostic service will allow users to measure network characteristics across multi-domain network paths. The service is designed to support network engineers in situations where a customer is experiencing

  3. Stirling engine

    SciTech Connect (OSTI)

    Bolger, S.R.

    1992-03-17

    This patent describes an engine. It comprises at least two variable volume compartments joined by a porous medium regenerator; heat exchangers in heat exchange relationships with the variable volume compartments; a fixed quantity of gas in the compartments; a piston in each of the compartments; means to control the pistons to vary the volumes of the gas transferring between the compartments in the form of overlapping quadrilateral waveforms to compress the gas in both compartments through the same cycle pressure ratio during a cycle compression step, to shift the gas between compartments and to expand the gas in both compartments through the same cycle pressure ratio during a cycle expansion step.

  4. Engineers Constructors

    Office of Legacy Management (LM)

    Engineers - Constructors ~ /:~ ( ' r,.... I!~\ l.,_",z;(J;' Bechtel National, Inc. Oak Ridge Office Jackson Plaza Tower 800 Oak Ridge Turnpike Oak Ridge. Tennessee Mail Address: P. O. B01l 350. Oak Ridge. TN 37830 bce-. R. Barber C. t1iller E. Wal ker C. Knoke G. Phillips G. Scott L. Blevins K. Harer DOE File No. 030-04G Professional Land Surveying 1404 Second Street Santa Fe, New Mexico 87501 Attn: Mr. Robert Benavides Reference: Purchase Contract l4501-01j04-PC-19 Bayo Canyon Survey Dear

  5. Transmission Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transmission Services BPA Clarifications on the DSO216 1 Document updated on 2242015 at 3:29:25 PM B O N N E V I L L E P O W E R A D M I N I S T R A T I O N BPA Clarifications on...

  6. Workplace Charging Challenge Partner: AVL Powertrain Engineering, Inc. |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy AVL Powertrain Engineering, Inc. Workplace Charging Challenge Partner: AVL Powertrain Engineering, Inc. Workplace Charging Challenge Partner: AVL Powertrain Engineering, Inc. Founded in 1948, AVL provides advanced powertrain engineering services and a broad range of testing technology for the development of internal combustion, diesel, alternative fuel, hybrid and electrical propulsion systems. By installing workplace charging stations, AVL is helping build the

  7. Overview of surface engineering and wear

    SciTech Connect (OSTI)

    Budinski, K.G.

    1996-12-31

    Surface engineering is a multidiscipline activity aimed at tailoring the properties or surfaces of engineering materials to improve their function or service life. As applied to metals, surface engineering includes processes such as plating, diffusion treatment, physical and chemical vapor deposition, ion implantation, thermal spray coatings, selective hardening, hardfacing, and a variety of less-used and proprietary processes. These processes will be described briefly and it is shown that each process has a niche where it works better or is more cost effective than competing surface engineering treatments or bulk materials. This paper reviews the various forms of wear that occur in industrial environments. Techniques are described to match available surface engineering processes with wear situations. The goal is to present selection guidelines for machine designers and industrial operating personnel on the use of surface engineering to solve wear problems.

  8. Findings of Hydrogen Internal Combustion Engine Durability

    SciTech Connect (OSTI)

    Garrett Beauregard

    2010-12-31

    Hydrogen Internal Combustion Engine (HICE) technology takes advantage of existing knowledge of combustion engines to provide a means to power passenger vehicle with hydrogen, perhaps as an interim measure while fuel cell technology continues to mature. This project seeks to provide data to determine the reliability of these engines. Data were collected from an engine operated on a dynamometer for 1000 hours of continuous use. Data were also collected from a fleet of eight (8) full-size pickup trucks powered with hydrogen-fueled engines. In this particular application, the data show that HICE technology provided reliable service during the operating period of the project. Analyses of engine components showed little sign of wear or stress except for cylinder head valves and seats. Material analysis showed signs of hydrogen embrittlement in intake valves.

  9. Idling Reduction for Emergency and Other Service Vehicles

    SciTech Connect (OSTI)

    2015-05-07

    This is a fact sheet about reducing idling for emergency and service vehicles. Emergency vehicles, such as police cars, ambulances, and fire trucks, along with other service vehicles such as armored cars, are often exempt from laws that limit engine idling. However, these vehicles can save fuel and reduce emissions with technologies that allow them to perform vital services without idling.

  10. Rotary engine

    SciTech Connect (OSTI)

    Brownfield, L.A.

    1980-12-02

    The major components of this rotary engine are two equal sized rotary units, the housing containing them along with associated ignition and cooling systems. Each of the rotary units consists of a shaft, gear, two outer compressor wheels, and one center power wheel which has twice the axial thickness as the compressor wheel. All the wheels are cylindrical in shape with a lobe section comprising a 180/sup 0/ arc on the periphery of each wheel which forms an expanding and contracting volumetric chamber by means of leading and trailing lips. The lobes of the first rotary unit are situated 180/sup 0/ opposite the lobes of the second adjacent mating rotary unit, thus lobes can intermesh with its corresponding wheel.

  11. Service Center

    Energy Savers [EERE]

    ASSIGNMENTS Pamela Arias-Ortega - Administrative and judicial litigation; and personnel law and workforce discipline mailto:parias-ortega@doeal.gov Celina Baca - Research and special projects for litigation and general law group mailto:cbaca@doeal.gov Dick Blakely - Designated Agency Ethics Advisor - Administrative litigation and mediation services; and ethics mailto:rblakely@doeal.gov Jonathan Buckner - Administrative review hearings; and administrative hearings before EEOC and MSPB

  12. Metabolic Engineering X Conference

    SciTech Connect (OSTI)

    Flach, Evan

    2015-05-07

    The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

  13. Rotary engine

    SciTech Connect (OSTI)

    Smith, T.A.

    1992-01-28

    This patent describes an improved rotary engine. It comprises an annular master cylinder composed of a cylindrical housing, a continuous hollow outer concentric shaft, an outward end housing and an inward end housing; means to form a dynamically balanced disc piston assembly extending from the the outward end housing to the the inward end housing thereby dividing the the annular master cylinder into at least three separate gas tight cylinders formed by rotating discs, each cylinder having at least two pistons independently rotatable therein; means to isolate the unexpanded gases from any exit path into the housing of the piston controlling means; and wherein one of the pistons in each cylinder is connected directly to the the continuous outer concentric shaft to form a first piston assembly, the other of the pistons in each cylinder is connected to the discs which are connected to the end of an inner concentric shaft to form a second piston assembly, means for controlling the piston action by a common eccentric shaft such that as the pistons rotate they expand and reduce the distance between them thereby changing the volume between the pistons within each of the cylinders.

  14. Increased Engine Efficiency via Advancements in Engine Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Efficiency via Advancements in Engine Combustion Systems Increased Engine Efficiency via Advancements in Engine Combustion Systems Presentation given at the 16th Directions...

  15. Sandia Energy - HCCI/SCCI Engine Fundamentals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HCCISCCI Engine Fundamentals Home Transportation Energy Predictive Simulation of Engines Engine Combustion Automotive HCCISCCI Engine Fundamentals HCCISCCI Engine...

  16. Sandia Energy - HCCI/SCCI Engine Fundamentals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HCCISCCI Engine Fundamentals Home Transportation Energy Predictive Simulation of Engines Engine Combustion Heavy Duty HCCISCCI Engine Fundamentals HCCISCCI Engine...

  17. Assuring quality in high-consequence engineering

    SciTech Connect (OSTI)

    Hoover, Marcey L.; Kolb, Rachel R.

    2014-03-01

    In high-consequence engineering organizations, such as Sandia, quality assurance may be heavily dependent on staff competency. Competency-dependent quality assurance models are at risk when the environment changes, as it has with increasing attrition rates, budget and schedule cuts, and competing program priorities. Risks in Sandia's competency-dependent culture can be mitigated through changes to hiring, training, and customer engagement approaches to manage people, partners, and products. Sandia's technical quality engineering organization has been able to mitigate corporate-level risks by driving changes that benefit all departments, and in doing so has assured Sandia's commitment to excellence in high-consequence engineering and national service.

  18. Navarro Kicks Off New Environmental Programs Services Contract at Nevada National Security Site

    Broader source: Energy.gov [DOE]

    LAS VEGAS – The Nevada National Security Site (NNSS) this month kicked off a new environmental programs services contract with Navarro Research and Engineering.

  19. DOE's Idaho National Lab Issues Request for Proposals for Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE's Idaho National Lab Issues Request for Proposals for Engineering and Design on NGNP July 26, 2006 - 4:37pm Addthis Services Will Guide R&D on Next Generation Reactor ...

  20. The first of a series of high efficiency, high bmep, turbocharged two-stroke cycle diesel engines; the general motors EMD 645FB engine

    SciTech Connect (OSTI)

    Kotlin, J.J.; Dunteman, N.R.; Scott, D.I.; Williams, H.A. Jr.

    1983-01-01

    The current Electro-Motive Division 645 Series turbocharged engines are the Model FB and EC. The FB engine combines the highest thermal efficiency with the highest specific output of any EMD engine to date. The FB Series incorporates 16:1 compression ratio with a fire ring piston and an improved turbocharger design. Engine components included in the FB engine provide very high output levels with exceptional reliability. This paper also describes the performance of the lower rated Model EC engine series which feature high thermal efficiency and utilize many engine components well proven in service and basic to the Model FB Series.

  1. International Society for Optical Engineering (SPIE) Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    International Society for Optical Engineering (SPIE) Fellows SPIE is the international society for optics and photonics founded to advance an interdisciplinary approach to the science and application of light. The Society advances emerging technologies through interdisciplinary information exchange, continuing education, publications, patent precedent, and career and professional growth. Each year SPIE recognizes accomplishments and meritorious service in the optics, photonics, optoelectronics,

  2. Career Map: Industrial Engineer

    Broader source: Energy.gov [DOE]

    The Wind Program's Career Map provides job description information for Industrial Engineer positions.

  3. Co-Optimization of Fuels and Engines (Optima)

    Broader source: Energy.gov [DOE]

    The Co-Optimization of Fuels and Engines (Optima) initiative seeks to transform the fuels and vehicles that provide mobility for our countrys people, goods, and services. This collaboration between industry stakeholders and the U.S. Department of Energy (DOE) national laboratories builds on decades of advances in both fuels and engines.

  4. Jefferson Lab Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Privacy and Security Notice Skip over navigation search JLab Engineering Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Engineering Division Engineering Pressure Systems Seminars/Training print version Mechanical Systems Mechanical Engineering - Document Control Survey Alignment Machine Shop Installation/Vacuum Cryogenics Cryogenics - Cryogenics Department

  5. Power Services (pbl/about)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Power Services > About Power Services Power Services Home Page Other Related Web Sites Power Services Organization Power Services Financial Information Tribal Affairs Office...

  6. The Phillips Stirling engine

    SciTech Connect (OSTI)

    Hargreaves, C.M.

    1991-01-01

    This book is about the Stirling engine and its development from the heavy cast-iron machine of the 19th century to that of today. It is a history of a research effort spanning nearly 50 years, together with an outline of principles, and some technical details and descriptions of the more important engines. Contents include: the hot-air engine; the 20th-century revival; the Stirling cycle; rhombic-drive engines; heating and cooling; pistons and seals; electric generators and heat pumps; exotic heat sources; the engine and the environment; swashplate engines; and the past and the future.

  7. Naval Station Newport Wind Resource Assessment. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites, and The Naval Facilities Engineering Service Center

    SciTech Connect (OSTI)

    Robichaud, R.; Fields, J.; Roberts, J. O.

    2012-02-01

    The U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage development of renewable energy (RE) on potentially contaminated land and mine sites. EPA is collaborating with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to evaluate RE options at Naval Station (NAVSTA) Newport in Newport, Rhode Island where multiple contaminated areas pose a threat to human health and the environment. Designated a superfund site on the National Priorities List in 1989, the base is committed to working toward reducing the its dependency on fossil fuels, decreasing its carbon footprint, and implementing RE projects where feasible. The Naval Facilities Engineering Service Center (NFESC) partnered with NREL in February 2009 to investigate the potential for wind energy generation at a number of Naval and Marine bases on the East Coast. NAVSTA Newport was one of several bases chosen for a detailed, site-specific wind resource investigation. NAVSTA Newport, in conjunction with NREL and NFESC, has been actively engaged in assessing the wind resource through several ongoing efforts. This report focuses on the wind resource assessment, the estimated energy production of wind turbines, and a survey of potential wind turbine options based upon the site-specific wind resource.

  8. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect (OSTI)

    Pike, Edward

    2014-03-31

    The objective of the Cummins ARES program, in partnership with the US Department of Energy (DOE), is to develop advanced natural gas engine technologies that increase engine system efficiency at lower emissions levels while attaining lower cost of ownership. The goals of the project are to demonstrate engine system achieving 50% Brake Thermal Efficiency (BTE) in three phases, 44%, 47% and 50% (starting baseline efficiency at 36% BTE) and 0.1 g/bhp-hr NOx system out emissions (starting baseline NOx emissions at 2 – 4 g/bhp-hr NOx). Primary path towards above goals include high Brake Mean Effective Pressure (BMEP), improved closed cycle efficiency, increased air handling efficiency and optimized engine subsystems. Cummins has successfully demonstrated each of the phases of this program. All targets have been achieved through application of a combined set of advanced base engine technologies and Waste Heat Recovery from Charge Air and Exhaust streams, optimized and validated on the demonstration engine and other large engines. The following architectures were selected for each Phase: Phase 1: Lean Burn Spark Ignited (SI) Key Technologies: High Efficiency Turbocharging, Higher Efficiency Combustion System. In production on the 60/91L engines. Over 500MW of ARES Phase 1 technology has been sold. Phase 2: Lean Burn Technology with Exhaust Waste Heat Recovery (WHR) System Key Technologies: Advanced Ignition System, Combustion Improvement, Integrated Waste Heat Recovery System. Base engine technologies intended for production within 2 to 3 years Phase 3: Lean Burn Technology with Exhaust and Charge Air Waste Heat Recovery System Key Technologies: Lower Friction, New Cylinder Head Designs, Improved Integrated Waste Heat Recovery System. Intended for production within 5 to 6 years Cummins is committed to the launch of next generation of large advanced NG engines based on ARES technology to be commercialized worldwide.

  9. ARM - Engineering Change Request & Engineering Change Order Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    resources, as soon as possible, when operational, science, or engineering needs require a quick engineering response where no design or redesign is required. Engineering Consultant...

  10. Polymer Engineering Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polymer Engineering Center University of Wisconsin-Madison Experimental and Numerical Studies of the Temperature Field in Selective Laser Sintering to Improve Shrinkage and Warpage Prediction Prof. Dr.-Ing. Natalie Rudolph Polymer Engineering Center Department of Mechanical Engineering University of Wisconsin-Madison 1513 University Ave Madison, WI 53706 Advanced Qualification of Additive Manufacturing Materials Workshop, July 20-21, 2015 in Santa Fe, NM Polymer Engineering Center University of

  11. Symbiotic Engineering | Open Energy Information

    Open Energy Info (EERE)

    Symbiotic Engineering Jump to: navigation, search Name: Symbiotic Engineering Place: Boulder, CO Website: www.symbioticengineering.com References: Symbiotic Engineering1...

  12. ETA Engineering | Open Energy Information

    Open Energy Info (EERE)

    ETA Engineering Jump to: navigation, search Logo: ETA Engineering Name: ETA Engineering Address: 4049 E. Presidio St., Suite 117 Place: Mesa, Arizona Zip: 85215 Product: renewable...

  13. Black Pine Engineering

    Broader source: Energy.gov [DOE]

    Black Pine Engineering is commercializing a disruptive technology in the turbomachinery industry. Using a patented woven composite construction, Black Pine Engineering can make turbomachines (turbines, compressors) that are cheaper and lighter than competing technologies. Using this technology, Black Pine Engineering will sell turbo-compressors which solve the problem of wasted steam in geothermal power plants.

  14. Assessment of the Market for Compressed Air Efficiency Services |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Assessment of the Market for Compressed Air Efficiency Services Assessment of the Market for Compressed Air Efficiency Services The objective of this report is to provide a comprehensive and balanced view of the market for engineering and consulting services to improve the energy efficiency of plant compressed air systems. The report is intended for use by industrial energy efficiency program operators in developing strategies to encourage the growth of compressed air

  15. Idling Reduction for Emergency and Other Service Vehicles

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    VEHICLE TECHNOLOGIES OFFICE Idling Reduction for Emergency and Other Service Vehicles Emergency vehicles, such as police cars, ambulances, and fire trucks, along with other service vehicles such as armored cars, are often exempt from laws that limit engine idling. However, these vehicles can save fuel and reduce emissions with technologies that allow them to perform vital services without idling. Police Vehicles Police cruisers spend much of their time parked and running while offcers monitor

  16. Air Charter Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    301-10.143) promulgated by the General Services Administration (GSA) which implements ... that allow federal funded transportation services for travel and cargo movements to use ...

  17. Service-Poke

    Energy Science and Technology Software Center (OSTI)

    2012-02-10

    Service-Poke is a system which manages running services ensuring only one copy is running and potentially up to one more copy is marked for future execution.

  18. ORISE: Health physics services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health physics services Nuclear power plant The Oak Ridge Institute for Science and Education (ORISE) offers comprehensive health physics services in a number of technical areas ...

  19. Guidelines for Engineering, Design, and Inspection Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Engineering, design, and inspection (ED&I) activities begin with the preliminary design (Title I). Pre-Title I activities are not considered part of the ED&I activities. Architectural/Engineering (A/E) activities are part of the ED&I activities. A/E activities are services that are an integral part of the production and delivery of the design plans, specifications, and drawings. This chapter defines ED&I and A/E activities and discusses how to estimate and track them.

  20. Solar powered Stirling engine

    SciTech Connect (OSTI)

    Meijer, R.J.

    1987-11-24

    In a solar dish module which comprises a dish which receives incident solar rays and reflects them to a focus at which is located the combination of a receiver and a heat engine organized and arranged so that the heat energy of the reflected solar rays collected at the receiver powers the engine, and wherein the receiver and heat engine are supported from the dish by a framework, the improvement is described which comprises journal means for journaling at least the engine on the framework to maintain certain predetermined spatial orientation for the engine in relation to the direction of gravity irrespective of spatial orientation of the dish.

  1. ARM - Engineering Work Request & Engineering Work Order Guidelines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Work Request & Engineering Work Order Guidelines Page Contents: Introduction Discussion of the ARM Climate Research Facility Engineering Process: The Engineering Change Request (ECR) and the Engineering Change Order (ECO) Operations and Engineering Task Consulting: The Engineering Work Request (EWR) and the Engineering Work Order (EWO) Relationship of the ECR/ECO and EWR/EWO to the Engineering Task Tracking Tool Relationship of the ECR/ECO and EWR/EWO to the Existing Configuration Control

  2. Engine intake system

    SciTech Connect (OSTI)

    Kanesaka, H.

    1989-02-07

    An intake system is described for an internal combustion engine, the system comprising: an intake passage having an intake port and an inertial supercharging intake pipe leading to the intake port; an intake valve mounted in the intake port and operatively connected to the engine for alternately opening and closing the intake port; a rotary valve operatively connected to the engine and disposed in the intake passage intermediate the inertial supercharging intake pipe and the intake port. The rotary valve is rotatable for opening and closing the intake passage, and timing adjusting means operatively connected to the engine and to the rotary valve for retarding the opening of the rotary valve relative to the opening of the intake valve at low engine speeds, and for advancing the opening of the rotary valve at high engine speeds, whereby the retarding and advancing of the opening of the rotary valve enables inertial supercharging in the intake pipe at both low and high engine speeds.

  3. Fitness for service applications in LNG plants

    SciTech Connect (OSTI)

    Bagnoli, D.L.; Polk, C.J.; Yin, H.; Gordon, J.R.

    1995-12-31

    Fitness-for-service assessments can provide information regarding operational reliability of equipment. However, to be meaningful, such assessments require an analytical procedure to determine the ability of engineering structures to tolerate the presence of weld flaws. In recent years, there has been a significant interest in this technology by the refining and petrochemical industries for predicting and avoiding fracture in pressurized components. Most applications have covered pressure vessel and piping where carbon and low alloy steels are the traditional materials of construction. More recently, fitness for service questions have developed for equipment with highly ductile materials such as aluminum alloys. In order to handle these questions ductile tearing resistance must be considered and R curve methods are required. In this paper examples are cited where fitness for service assessments were required for an aluminum heat exchanger in LNG service. Suitable R curve data were developed in order to establish flaw tolerance following UT inspections of this equipment.

  4. Equation of state and heavy-quark free energy at finite temperature and density in two flavor lattice QCD with Wilson quark action

    SciTech Connect (OSTI)

    Ejiri, S.; Maezawa, Y.; Ukita, N.; Aoki, S.; Hatsuda, T.; Ishii, N.; Kanaya, K.; Umeda, T.

    2010-07-01

    We study the equation of state at finite temperature and density in two-flavor QCD with the renormalization group improved gluon action and the clover-improved Wilson quark action on a 16{sup 3}x4 lattice. Along the lines of constant physics at m{sub PS}/m{sub V}=0.65 and 0.80, we compute the second and forth derivatives of the grand canonical partition function with respect to the quark chemical potential {mu}{sub q}=({mu}{sub u}+{mu}{sub d})/2 and the isospin chemical potential {mu}{sub I}=({mu}{sub u}-{mu}{sub d})/2 at vanishing chemical potentials, and study the behaviors of thermodynamic quantities at finite {mu}{sub q} using these derivatives for the case {mu}{sub I}=0. In particular, we study density fluctuations at nonezero temperature and density by calculating the quark number and isospin susceptibilities and their derivatives with respect to {mu}{sub q}. To suppress statistical fluctuations, we also examine new techniques applicable at low densities. We find a large enhancement in the fluctuation of the quark number when the density increased near the pseudocritical temperature, suggesting a critical point at finite {mu}{sub q} terminating the first order transition line between hadronic and quark-gluon-plasma phases. This result agrees with the previous results using staggered-type quark actions qualitatively. Furthermore, we study heavy-quark free energies and Debye screening masses at finite density by measuring the first and second derivatives of these quantities for various color channels of heavy quark-quark and quark-antiquark pairs. The results suggest that, to the leading order of {mu}{sub q}, the interaction between two quarks becomes stronger at finite densities, while that between quark and antiquark becomes weaker.

  5. Mechanical Engineering Department technical review

    SciTech Connect (OSTI)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  6. International Services | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab International Services The International Services Office contributes to Jefferson Lab's intellectual and cultural diversity through its service to the international community. A D D I T I O N A L L I N K S: JRIS Home Registration Badging Visa/Immigration ID Requirements Immigration News/Updates top-right bottom-left-corner bottom-right-corner International Services The International Services Office contributes to Jefferson Lab's intellectual and cultural diversity through its

  7. MOX Services Unclassified Information System PIA, National Nuclear Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Administration | Department of Energy MOX Services Unclassified Information System PIA, National Nuclear Services Administration MOX Services Unclassified Information System PIA, National Nuclear Services Administration MOX Services Unclassified Information System PIA, National Nuclear Services Administration PDF icon MOX Services Unclassified Information System PIA, National Nuclear Services Administration More Documents & Publications TRAIN-PIA.pdf Occupational Medicine - Assistant

  8. Supervisory Electrical Engineer

    Broader source: Energy.gov [DOE]

    This position is located in an Operations and Maintenance (O&M;) District under one of the three Senior O&M; Managers, Transmission Field Services (TF), Transmission Services. Transmission...

  9. Safety Advisor (Nuclear Engineer)

    Broader source: Energy.gov [DOE]

    **This is an Excepted Service position. This appointment will not confer Competitive Service career-conditional or career tenure status. This means that if you are selected, you would have to...

  10. Supervisory Electronics Engineer

    Broader source: Energy.gov [DOE]

    This position is located in an Operations and Maintenance (O&M;) District under one of the three Senior O&M; Managers, Transmission Field Services (TF), Transmission Services. Transmission...

  11. Stirling cycle rotary engine

    SciTech Connect (OSTI)

    Chandler, J.A.

    1988-06-28

    A Stirling cycle rotary engine for producing mechanical energy from heat generated by a heat source external to the engine, the engine including: an engine housing having an interior toroidal cavity with a central housing axis for receiving a working gas, the engine housing further having a cool as inlet port, a compressed gas outlet port, a heated compressed gas inlet port, and a hot exhaust gas outlet port at least three rotors each fixedly mounted to a respective rotor shaft and independently rotatable within the toroidal cavity about the central axis; each of the rotors including a pair of rotor blocks spaced radially on diametrically opposing sides of the respective rotor shaft, each rotor block having a radially fixed curva-linear outer surface for sealed rotational engagement with the engine housing.

  12. Staged combustion with piston engine and turbine engine supercharger

    DOE Patents [OSTI]

    Fischer, Larry E. (Los Gatos, CA); Anderson, Brian L. (Lodi, CA); O'Brien, Kevin C. (San Ramon, CA)

    2006-05-09

    A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

  13. Staged combustion with piston engine and turbine engine supercharger

    DOE Patents [OSTI]

    Fischer, Larry E. (Los Gatos, CA); Anderson, Brian L. (Lodi, CA); O'Brien, Kevin C. (San Ramon, CA)

    2011-11-01

    A combustion engine method and system provides increased fuel efficiency and reduces polluting exhaust emissions by burning fuel in a two-stage combustion system. Fuel is combusted in a piston engine in a first stage producing piston engine exhaust gases. Fuel contained in the piston engine exhaust gases is combusted in a second stage turbine engine. Turbine engine exhaust gases are used to supercharge the piston engine.

  14. Integrated and Engineered Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Integrated and Engineered Systems Integrated and Engineered Systems National security depends on science and technology. The United States relies on Los Alamos National Laboratory for the best of both. No place on Earth pursues a broader array of world-class scientific endeavors. Contact thumbnail of Business Development Executive Miranda Intrator Business Development Executive Richard P. Feynmnan Center for Innovation (505) 665-8315 Email Engineers at Los Alamos create, design, and build the

  15. Science & Engineering Capabilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capabilities /science-innovation/_assets/images/icon-science.jpg Science & Engineering Capabilities These capabilities are our science and engineering at work for the national security interest in areas from global climate to cyber security, from nonproliferation to new materials, from clean energy solutions to supercomputing. Accelerators, Electrodynamics» Energy» Materials Science» Bioscience: Bioenergy, Biosecurity, and Health» Engineering» National Security, Weapons Science»

  16. Supervisory Electrical Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Maintenance, (J5640) Engineering and Construciton 5555 E....

  17. Science, Technology & Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    search, Alan Bishop has been selected to be the Laboratory's next Principal Associate Director for - 2 - Science, Technology, and Engineering (PADSTE). Bishop has been acting...

  18. XML Engineering Environment

    Energy Science and Technology Software Center (OSTI)

    2006-07-27

    The XML Engineering Environment is a reconfigurable software system that allows users to translate, enhance and route data from sources to sinks.

  19. Science, Technology, and Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PADSTE Science, Technology, and Engineering Delivering mission success and innovative solutions to national security problems through the agile, rapid application of our...

  20. ARM - Engineering Processes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Processes Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field...

  1. Stirling engine heating system

    SciTech Connect (OSTI)

    Johansson, L.N.; Houtman, W.H.; Percival, W.H.

    1988-06-28

    A hot gas engine is described wherein a working gas flows back and forth in a closed path between a relatively cooler compression cylinder side of the engine and a relatively hotter expansion cylinder side of the engine and the path contains means including a heat source and a heat sink acting upon the gas in cooperation with the compression and expansion cylinders to cause the gas to execute a thermodynamic cycle wherein useful mechanical output power is developed by the engine, the improvement in the heat source which comprises a plurality of individual tubes each forming a portion of the closed path for the working gas.

  2. Polymer Engineering Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center 1513 University Ave 1035 Mechanical Engineering building natalie.rudolph@wisc.edu Dielectric Analysis Dipl.-Phys. Alexander Chaloupka Fraunhofer ICT Branch...

  3. Advanced Natural Gas Reciprocating Engine(s)

    SciTech Connect (OSTI)

    Kwok, Doris; Boucher, Cheryl

    2009-09-30

    Energy independence and fuel savings are hallmarks of the nations energy strategy. The advancement of natural gas reciprocating engine power generation technology is critical to the nations future. A new engine platform that meets the efficiency, emissions, fuel flexibility, cost and reliability/maintainability targets will enable American manufacturers to have highly competitive products that provide substantial environmental and economic benefits in the US and in international markets. Along with Cummins and Waukesha, Caterpillar participated in a multiyear cooperative agreement with the Department of Energy to create a 50% efficiency natural gas powered reciprocating engine system with a 95% reduction in NOx emissions by the year 2013. This platform developed under this agreement will be a significant contributor to the US energy strategy and will enable gas engine technology to remain a highly competitive choice, meeting customer cost of electricity targets, and regulatory environmental standard. Engine development under the Advanced Reciprocating Engine System (ARES) program was divided into phases, with the ultimate goal being approached in a series of incremental steps. This incremental approach would promote the commercialization of ARES technologies as soon as they emerged from development and would provide a technical and commercial foundation of later-developing technologies. Demonstrations of the Phase I and Phase II technology were completed in 2004 and 2008, respectively. Program tasks in Phase III included component and system development and testing from 2009-2012. Two advanced ignition technology evaluations were investigated under the ARES program: laser ignition and distributed ignition (DIGN). In collaboration with Colorado State University (CSU), a laser ignition system was developed to provide ignition at lean burn and high boost conditions. Much work has been performed in Caterpillars DIGN program under the ARES program. This work has consisted of both modeling and single cylinder engine experiments to quantify DIGN performance. The air handling systems of natural gas engines dissipate a percentage of available energy as a result of both flow losses and turbomachinery inefficiencies. An analytical study was initiated to increase compressor efficiency by employing a 2-stage inter-cooled compressor. Caterpillar also studied a turbo-compound system that employs a power turbine to recover energy from the exhaust gases for improved engine efficiency. Several other component and system investigations were undertaken during the final phase of the program to reach the ultimate ARES goals. An intake valve actuation system was developed and tested to improve engine efficiency, durability and load acceptance. Analytical modeling and materials testing were performed to evaluate the performance of steel pistons and compacted graphite iron cylinder head. Effort was made to improve the detonation sensing system by studying and comparing the performance of different pressure sensors. To reduce unburned hydrocarbon emissions, different camshafts were designed and built to investigate the effect of exhaust valve opening timing and value overlap. 1-D & 3-D coupled simulation was used to study intake and exhaust manifold dynamics with the goal of reducing load in-balance between cylinders. Selective catalytic reduction with on-board reductant generation to reduce NOx emissions was also engine tested. An effective mean to successfully deploy ARES technologies into the energy markets is to deploy demonstration projects in the field. In 2010, NETL and Caterpillar agreed to include a new opportunity fuel deliverable and two field demonstrations in the ARES program. An Organic Rankine Cycle system was designed with production intent incorporating lessons learned from the Phase II demonstration. Unfortunately, business conditions caused Caterpillar to cancel this demonstration in 2011. Nonetheless, Caterpillar partnered with a local dealer to deploy an ARES class engine using syngas from a biomass gasifier as

  4. Engine and method for operating an engine

    DOE Patents [OSTI]

    Lauper, Jr., John Christian (East Peoria, IL); Willi, Martin Leo (Dunlap, IL); Thirunavukarasu, Balamurugesh (Peoria, IL); Gong, Weidong (Dunlap, IL)

    2008-12-23

    A method of operating an engine is provided. The method may include supplying a combustible combination of reactants to a combustion chamber of the engine, which may include supplying a first hydrocarbon fuel, hydrogen fuel, and a second hydrocarbon fuel to the combustion chamber. Supplying the second hydrocarbon fuel to the combustion chamber may include at least one of supplying at least a portion of the second hydrocarbon fuel from an outlet port that discharges into an intake system of the engine and supplying at least a portion of the second hydrocarbon fuel from an outlet port that discharges into the combustion chamber. Additionally, the method may include combusting the combustible combination of reactants in the combustion chamber.

  5. Perturbing engine performance measurements to determine optimal engine control settings

    DOE Patents [OSTI]

    Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

    2014-12-30

    Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initial value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.

  6. UPS multifuel stratified charge engine development program - Field test

    SciTech Connect (OSTI)

    Lewis, J.M.

    1986-01-01

    The multifuel, stratified charge engine program launched by United Parcel Service in 1978 has progressed through two years of field tests. The mechanical and electronic experience with the field test engine is covered in detail, with problems and causes identified and solutions described. Also included are reports on research initiated as a consequence of problems that appeared in the field test engines. All aspects of engine performance are covered, including fuel economy, multifuel experience, emissions testing and tuning, maintenance expectations and driver reactions. The original 350-engine field test was run with many components newly designed or modified, and relatively untested. Component and reliability problems identified in the field test have prompted modifications, and the engines are being reworked for the start of a new 200-engine field test. Research studies conducted on the field test engine have produced very encouraging emissions data, which suggests that the low-load hydrocarbon problem historically associated with this technology is not a barrier to commercial application. The engine appears capable of passing the heavy duty gasoline engine transient test.

  7. Career Map: Research Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Engineer Career Map: Research Engineer Two research engineers wearing safety glasses view results of an experiment. Research Engineer Position Title Research Engineer Alternate Title(s) Government Engineer, Research and Development Engineer, Basic Research Engineer, Component Researcher, Materials Engineer Education & Training Level Bachelor's degree required, prefer graduate degree Education & Training Level Description Research engineers must have a bachelor's degree.

  8. Food Service Buildings

    U.S. Energy Information Administration (EIA) Indexed Site

    was a food service building were only asked whether the building was a restaurant, bar, fast food chain, or cafeteria (all the same category) or some other type of food service...

  9. NERSC FTP Upload Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC FTP Upload Service The NERSC FTP Upload service is designed for external collaborators to be able to send data to NERSC staff and users. It allows you to create a...

  10. 503 Service Temporarily Unavailable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service Temporarily Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Web Server at cen-efrc.org

  11. RESIDUAL STRESSES IN ADDITIVELY MANUFACTURED INCONEL 718 ENGINE MOUNT

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: RESIDUAL STRESSES IN ADDITIVELY MANUFACTURED INCONEL 718 ENGINE MOUNT Citation Details In-Document Search Title: RESIDUAL STRESSES IN ADDITIVELY MANUFACTURED INCONEL 718 ENGINE MOUNT Authors: Watkins, Thomas R [1] ; Cornwell, Paris A [1] ; Dehoff, Ryan R [1] ; Nangia, Vinod [2] ; Godfrey, Donald G. [2] + Show Author Affiliations ORNL Honeywell Aerospace Services Publication Date: 2015-01-01 OSTI Identifier: 1224750 DOE Contract Number:

  12. Hydraulic Performance and Mass Transfer Efficiency of Engineering Scale

    Office of Scientific and Technical Information (OSTI)

    Centrifugal Contactors (Conference) | SciTech Connect Hydraulic Performance and Mass Transfer Efficiency of Engineering Scale Centrifugal Contactors Citation Details In-Document Search Title: Hydraulic Performance and Mass Transfer Efficiency of Engineering Scale Centrifugal Contactors × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service.

  13. Microfluidic ultrasonic particle separators with engineered node locations

    Office of Scientific and Technical Information (OSTI)

    and geometries (Patent) | SciTech Connect Microfluidic ultrasonic particle separators with engineered node locations and geometries Citation Details In-Document Search Title: Microfluidic ultrasonic particle separators with engineered node locations and geometries × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize

  14. Engineering Nanocrystals for Energy Conversion and Storage, and Sensors

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Technical Report: Engineering Nanocrystals for Energy Conversion and Storage, and Sensors Citation Details In-Document Search Title: Engineering Nanocrystals for Energy Conversion and Storage, and Sensors × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information

  15. FY10 Engineering Innovations, Research and Technology Report (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect FY10 Engineering Innovations, Research and Technology Report Citation Details In-Document Search Title: FY10 Engineering Innovations, Research and Technology Report × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A

  16. Envera Variable Compression Ratio Engine (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Envera Variable Compression Ratio Engine Citation Details In-Document Search Title: Envera Variable Compression Ratio Engine × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also available for sale to the

  17. Microfluidic ultrasonic particle separators with engineered node locations

    Office of Scientific and Technical Information (OSTI)

    and geometries (Patent) | SciTech Connect ultrasonic particle separators with engineered node locations and geometries Citation Details In-Document Search Title: Microfluidic ultrasonic particle separators with engineered node locations and geometries × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional

  18. Thermoacoustic Engines and Refrigerators: A Short Course (Conference) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Thermoacoustic Engines and Refrigerators: A Short Course Citation Details In-Document Search Title: Thermoacoustic Engines and Refrigerators: A Short Course × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this

  19. Engineering Division Superconducting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Engineering Division Superconducting Magnet Technology for Fusion and Large Scale Applications Joseph V. Minervini Massachusetts Institute of Technology Plasma Science and Fusion Center Princeton Plasma Physics Laboratory Colloquium Princeton, NJ October 15, 2014 Technology & Engineering Division Contents * Fusion Magnets - Present and Future - Vision - State-of-the-art - New developments in superconductors * Advanced fusion magnet technology * Other large scale applications of

  20. Stirling engine piston ring

    DOE Patents [OSTI]

    Howarth, Roy B. (Clifton Park, NY)

    1983-01-01

    A piston ring design for a Stirling engine wherein the contact pressure between the piston and the cylinder is maintained at a uniform level, independent of engine conditions through a balancing of the pressure exerted upon the ring's surface and thereby allowing the contact pressure on the ring to be predetermined through the use of a preloaded expander ring.

  1. Free piston stirling engines

    SciTech Connect (OSTI)

    Walker, C.

    1985-01-01

    This book presents a basic introduction to free piston Stirling engine technology through a review of specialized background material. It also includes information based on actual construction and operation experience with these machines, as well as theoretical and analytical insights into free piston Stirling engine technology.

  2. Grid Software and Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Grid Software and Services Overview Grid computing can include a broad range of technologies. At NERSC we are interested in new computational and data-centric services which enhance the productivity of science teams. The grid infrastructure we support (described below) can be used to manage jobs and data in ways that are otherwise difficult from the comamnd line. Grid services enable remote job management, file transfer and distributed computing workflows through the Globus Toolkit. Web

  3. National Service Activation Checklist

    Office of Environmental Management (EM)

    Service Activation Checklist You have just received information that you are being activated for national service. Covered or Not Covered If you have received notice to report for active duty - Army, Navy, Marines, Air Force, National Guard, Public Health Service, or Coast Guard and you are a Federal employee, you have employment and reemployment rights under the Uniformed Services Employment and Reemployment Act of 1994 (USERRA). Basics - Telling People What is Happening 1. Have you told your

  4. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The Office of Congressional and Intergovernmental Affairs offers a broad range of services to a variety of constituencies and stakeholder groups. Dedicated to facilitating the flow of information between the Department and all constituencies, our office provides the following services. Congressional Affairs Serving as a central point of contact for interactions on congressional matters, our congressional affairs team offers expertise in coordinating and directing the

  5. Thermoacoustic engines and refrigerators

    SciTech Connect (OSTI)

    Swift, G.

    1996-12-31

    This report is a transcript of a practice lecture given in preparation for a review lecture on the operation of thermoacoustic engines and refrigerators. The author begins by a brief review of the thermodynamic principles underlying the operation of thermoacoustic engines and refrigerators. Remember from thermodynamics class that there are two kinds of heat engines, the heat engine or the prime mover which produces work from heat, and the refrigerator or heat pump that uses work to pump heat. The device operates between two thermal reservoirs at temperatures T{sub hot} and T{sub cold}. In the heat engine, heat flows into the device from the reservoir at T{sub hot}, produces work, and delivers waste heat into the reservoir at T{sub cold}. In the refrigerator, work flows into the device, lifting heat Q{sub cold} from reservoir at T{sub cold} and rejecting waste heat into the reservoir at T{sub hot}.

  6. Metabolic Engineering VII Conference

    SciTech Connect (OSTI)

    Kevin Korpics

    2012-12-04

    The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniques important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.

  7. Simple Lookup Service

    Energy Science and Technology Software Center (OSTI)

    2013-05-01

    Simple Lookup Service (sLS) is a REST/JSON based lookup service that allows users to publish information in the form of key-value pairs and search for the published information. The lookup service supports both pull and push model. This software can be used to create a distributed architecture/cloud.

  8. Analytical Services - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contracting Wastren Advantage, Inc. Analytical Services Contracting ORP Contracts and Procurements RL Contracts and Procurements CH2M HILL Plateau Remediation Company Mission Support Alliance Washington Closure Hanford HPM Corporation (HPMC) Wastren Advantage, Inc. Analytical Services HASQARD Focus Group Bechtel National, Inc. Washington River Protection Solutions Analytical Services Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size Analytical laboratory analyses

  9. Mail Services User's Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-10-03

    This Guide provides information on using Department of Energy (DOE) mail services in accordance with U.S. Postal Service, General Services Administration (GSA), and DOE regulations. Cancels DOE M 573.1-1. Canceled by DOE N 251.89.

  10. Increased Engine Efficiency via Advancements in Engine Combustion Systems |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Engine Efficiency via Advancements in Engine Combustion Systems Increased Engine Efficiency via Advancements in Engine Combustion Systems Presentation given at the 16th Directions in Engine-Efficiency and Emissions Research (DEER) Conference in Detroit, MI, September 27-30, 2010. PDF icon deer10_sisken.pdf More Documents & Publications High-Efficiency Engine Technologies Session Introduction Demonstrating and Validating a Next Generation Model-Based Controller for

  11. Service and Repair Work

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Service and Repair Work Whenever on-site service or repair work needs to be done, a Procurement Work Sheet (PWS) must be completed, and possibly an IWS, authorized and released. PWS is required for service work even if there are no apparent hazards. PWS is required for work in Jupiter Laser Facility even if you have a PWS for service/repairs in another location. To complete a PWS for service work in Jupiter Laser Facility, please contact Sean Holte (2-3905, pager #05312). Notify Brent Stuart and

  12. The Science DMZ Eli Dart, Network Engineer ESnet Engineering...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science DMZ Eli Dart, Network Engineer ESnet Engineering Group Winter 2011 Joint Techs Clemson, SC February 1, 2011 Lawrence Berkeley National Laboratory U.S. Department of Energy...

  13. E85 Optimized Engine

    SciTech Connect (OSTI)

    Stanley Bower

    2011-12-31

    A 5.0L V8 twin-turbocharged direct injection engine was designed, built, and tested for the purpose of assessing the fuel economy and performance in the F-Series pickup of the Dual Fuel engine concept and of an E85 optimized FFV engine. Additionally, production 3.5L gasoline turbocharged direct injection (GTDI) ??EcoBoost? engines were converted to Dual Fuel capability and used to evaluate the cold start emissions and fuel system robustness of the Dual Fuel engine concept. Project objectives were: to develop a roadmap to demonstrate a minimized fuel economy penalty for an F-Series FFV truck with a highly boosted, high compression ratio spark ignition engine optimized to run with ethanol fuel blends up to E85; to reduce FTP 75 energy consumption by 15% - 20% compared to an equally powered vehicle with a current production gasoline engine; and to meet ULEV emissions, with a stretch target of ULEV II / Tier II Bin 4. All project objectives were met or exceeded.

  14. Engineering Division Safety Officer Named: Message From Will Oren |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Engineering Division Safety Officer Named: Message From Will Oren All, Since Henry Robertson took on leadership of the Safety Systems Group we have had Harry Fanning, Accelerator Division Safety Officer, filling in as the Engineering DSO. Harry has done an outstanding job in this role and I would like to thank him for his services over the past year. I have recently reached an agreement with Paul Collins and his supervisor, for Paul to become the Engineering DSO starting Jan 4,

  15. Student Trainee (Engineering)- Intern

    Broader source: Energy.gov [DOE]

    The purpose of the Pathways Intern Employment Program is to provide the intern with exposure to public service, enhance educational experience, and support educational goals. The program is...

  16. Student Trainee (Electrical Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in Transmission Services (T) of the Bonneville Power Administration (BPA). The position involves periods of pertinent formal education and periods of employment in the...

  17. Student Trainee (Mechanical Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in Transmission Services (T) at Bonneville Power Administration (BPA). The position involves periods of pertinent formal education and periods of employment in the...

  18. Student Trainee (Electronics Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in Transmission Services (T) of the Bonneville Power Administration (BPA). The position involves periods of pertinent formal education and periods of employment in the...

  19. Student Trainee (Civil Engineer)

    Broader source: Energy.gov [DOE]

    This position is located in Transmission Services (T) of the Bonneville Power Administration (BPA). The position involves periods of pertinent formal education and periods of employment in the...

  20. Safety Advisor (Nuclear Engineer)

    Broader source: Energy.gov [DOE]

    WHO MAY APPLY: Current or former (competitive and excepted service) Federal civilian employees; Veterans discharged under honorable conditions (this means an honorable or general discharge), AND...

  1. VALUE ENGINEERING.PDF

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS FOLLOW-ON INSPECTION OF THE DEPARTMENT OF ENERGY'S VALUE ENGINEERING PROGRAM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 20, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Follow-on Inspection of the Department of Energy's Value Engineering Program" BACKGROUND Value Engineering is a

  2. Marine Services | Open Energy Information

    Open Energy Info (EERE)

    Marine Services Place: Florida Sector: Services Product: Marine Services is planning tidal energy projects off the coasts of California and Florida. References: Marine...

  3. Career Map: Electrical Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Engineer Career Map: Electrical Engineer Two electrical engineers inspect the electrical components to a turbine. Electrical Engineer Position Title Electrical Engineer Alternate Title(s) Electronics Engineer, Project Engineer, Power Systems, Transmission Engineer Education & Training Level Advanced, bachelor's required, prefer graduate degree Education & Training Level Description Electrical engineers must have a bachelor's degree. Employers also value practical experience,

  4. BNL Technical Services Awarded Service-Disabled Veteran-Owned...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year BNL Technical Services Awarded Service-Disabled Veteran-Owned Small Business of the Year ...

  5. Windward Engineering | Open Energy Information

    Open Energy Info (EERE)

    Windward Engineering Jump to: navigation, search Name: Windward Engineering Place: Spanish Fork, Utah Zip: 84660 Sector: Wind energy Product: Provides simulations, testing and...

  6. Visual Engineering | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    other engineering products. In addition, Mark Bryden and Doug McCorkle, along with collaborators at NETL and Reaction Engineering International have developed open-source software...

  7. Nuclear Engineering | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Engineering Advancing the safe and secure use of nuclear energy Argonne's Nuclear Engineering (NE) division works to advance nuclear energy as a proven, abundant and ...

  8. Taitem Engineering | Open Energy Information

    Open Energy Info (EERE)

    Taitem Engineering Jump to: navigation, search Name: Taitem Engineering Place: Ithaca, NY Information About Partnership with NREL Partnership with NREL Yes Partnership Type "CRADA"...

  9. Pract Engineering | Open Energy Information

    Open Energy Info (EERE)

    Pract Engineering Jump to: navigation, search Name: Pract Engineering Address: 1150 55th Street, Suite C Place: Emeryville, California Zip: 94608 Region: Bay Area Sector: Renewable...

  10. ION Engineering | Open Energy Information

    Open Energy Info (EERE)

    ION Engineering Jump to: navigation, search Name: ION Engineering Place: Boulder, Colorado Zip: 80301 Sector: Carbon Product: ION is the first clean-tech company to successfully...

  11. INL '@work' Nuclear Engineer

    ScienceCinema (OSTI)

    McLean, Heather

    2013-05-28

    Heather MacLean talks about her job as a Nuclear Engineer for Idaho National Laboratory. For more information about INL careers, visit http://www.facebook.com/idahonationallaboratory.

  12. General Engineer (Project Manager)

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Desert Southwest Region Engineering and Construction (G5600) 615 S. 43rd Avenue...

  13. Displacer for Stirling engine

    SciTech Connect (OSTI)

    Brown, A. T.

    1985-12-24

    In a Stirling engine and the like, a displacer piston having a plurality of internal baffles and insulation so as to prevent undesired heat transfer across the displacer piston.

  14. Rotary vee engine

    SciTech Connect (OSTI)

    Sullivan, R.W.; Holder, T.J.; Buchanan, M.F.

    1991-05-14

    This patent describes a rotary vee engine. It comprises: a housing; two cylinder blocks; angled support shaft means; an air/fuel system; angled pistons; and sealing means for sealing the combustion chamber.

  15. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Murray, J.L.; Mosca, J.O.

    1992-02-25

    This patent describes a rotary internal combustion engine. It includes a housing; a cam track internally disposed within the housing and adapted to receive a cam follower; an engine block disposed within the housing, the engine block being relatively rotatable within the housing about a central axis; means connectable to an external drive member for translating the relative rotation of the engine block with respect to the housing into useful work; at least one radially arranged cylinder assembly on the block, each cylinder assembly including a cylinder having a longitudinal axis extending generally radially outwardly from the rotational axis of the block, the cylinder including means defining an end wall, a piston member disposed within the cylinder and adapted to reciprocate within the cylinder; the piston, cylinder and cylinder end wall together.

  16. Engineering Division Superconducting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Engineering Division HEP Accelerator Dipole 10152014 Joseph V. Minervini 58 * Large Hadron Collider (LHC) at CERN uses NbTi dipoles and quadrupoles operating at 8 T, 2 K ...

  17. Energy Technology Engineering Center

    Broader source: Energy.gov [DOE]

    The Energy Technology Engineering Center (ETEC) is located within Area IV of the Santa Susana Field Laboratory. The ETEC occupies 90-acres within the 290 acre site. The Santa Susana Field...

  18. Information Systems Engineering

    Broader source: Energy.gov [DOE]

    The OCIO is dedicated to supporting the development and maintenance of DOE Department wide and site-specific software and IT systems engineering initiatives.  This webpage contains resources,...

  19. Commercial-Grade, Scalable Support and Training Services Platform |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Commercial-Grade, Scalable Support and Training Services Platform Commercial-Grade, Scalable Support and Training Services Platform Lead Performer: Big Ladder Software - Denver, CO DOE Funding: $149,554 Cost Share: N/A Project Term: June 2014 - March 2015 Funding Opportunity: Small Business Innovation Research FY 2014 Phase 1 Release 2 Awards Project Objective The Department of Energy has funded the development of two industry-leading simulation engines, EnergyPlus and

  20. Liquid metal thermoacoustic engine

    SciTech Connect (OSTI)

    Swift, G.W.; Migliori, A.; Wheatley, J.C.

    1986-01-01

    We are studying a liquid metal thermoacoustic engine both theoretically and experimentally. This type of engine promises to produce large quantities of electrical energy from heat at modest efficiency with no moving parts. A sound wave is usually thought of as consisting of pressure oscillations, but always attendant to the pressure oscillation are temperature oscillations. The combination produces a rich variety of ''thermoacoustic'' effects. These effects are usually so small that they are never noticed in everyday life; nevertheless under the right circumstances they can be harnessed to produce powerful heat engines, heat pumps, and refrigerators. In our liquid metal thermoacoustic engine, heat flow from a high temperature source to a low temperature sink generates a high-amplitude standing acoustic wave in liquid sodium. This acoustic power is converted to electric power by a simple magnetohydrodynamic effect at the acoustic oscillation frequency. We have developed a detailed thermoacoustic theory applicable to this engine, and find that a reasonably designed liquid sodium engine operating between 700/sup 0/C and 100/sup 0/C should generate about 60 W/cm/sup 2/ of acoustic power at about 1/3 of Carnot's efficiency. Construction of a 3000 W-thermal laboratory model engine has just been completed, and we have exciting preliminary experimental results as of the time of preparation of this manuscript showing, basically, that the engine works. We have also designed and built a 1 kHz liquid sodium magnetohydrodynamic generator and have extensive measurements on it. It is now very well characterized both experimentally and theoretically. The first generator of its kind, it already converts acoustic power to electric power with 40% efficiency. 16 refs., 5 figs.

  1. Stirling engine power control

    DOE Patents [OSTI]

    Fraser, James P. (Scotia, NY)

    1983-01-01

    A power control method and apparatus for a Stirling engine including a valved duct connected to the junction of the regenerator and the cooler and running to a bypass chamber connected between the heater and the cylinder. An oscillating zone of demarcation between the hot and cold portions of the working gas is established in the bypass chamber, and the engine pistons and cylinders can run cold.

  2. NGNP Engineering Status

    SciTech Connect (OSTI)

    John Collins

    2010-08-01

    The objectives of Phase 1 Engineering and Design scope are to: 1) complete the initial design activities for a prototype nuclear reactor and plant that is capable of co-generating electricity, hydrogen, and process heat; 2) identify technological aspects of the NGNP that need further advancement by research and development activities; and 3) provide engineering support to the early licensing process, including technical input to white papers and developing the basis for future safety analyses.

  3. UNM School of Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    School of Engineering - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  4. SCADA Engineering Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Solutions - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  5. scramjet engine simulations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scramjet engine simulations - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs

  6. stochastic unit commitment engine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    unit commitment engine - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  7. Chemical & Engineering News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & Engineering News - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  8. Materials Sciences and Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences and Engineering - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  9. Nuclear Power & Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power & Engineering - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs Advanced

  10. Predictive Simulation of Engines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Predictive Simulation of Engines - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs

  11. Office of Headquarters Procurement Services - Employee Customer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Office of Headquarters Procurement Services - Employee Customer Service Standards Office of Headquarters Procurement Services - Employee Customer Service Standards CUSTOMER FOCUS ...

  12. Microsoft PowerPoint - Station Service for SWPA_June _17_2015 - HDC.pptx [Read-Only]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Station Service Generators Southwestern Federal Hydropower Council Dewey Short Visitor Center June 17, 2015 by Scott Cotner, P.E. Senior Electrical Engineer Hydroelectric Design Center BUILDING STRONG ® PORTLAND DISTRICT 2 Outline  Station Service System Definition  Components of a Station Service System  System Design Criteria  Typical Station Service Configurations  Station Service Generators ► Benefits ► Potential Rehab Items  Alternative Sources  Summary BUILDING

  13. Intrinsically irreversible heat engine

    DOE Patents [OSTI]

    Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

    1984-01-01

    A class of heat engines based on an intrinsically irreversible heat transfer process is disclosed. In a typical embodiment the engine comprises a compressible fluid that is cyclically compressed and expanded while at the same time being driven in reciprocal motion by a positive displacement drive means. A second thermodynamic medium is maintained in imperfect thermal contact with the fluid and bears a broken thermodynamic symmetry with respect to the fluid. the second thermodynamic medium is a structure adapted to have a low fluid flow impedance with respect to the compressible fluid, and which is further adapted to be in only moderate thermal contact with the fluid. In operation, thermal energy is pumped along the second medium due to a phase lag between the cyclical heating and cooling of the fluid and the resulting heat conduction between the fluid and the medium. In a preferred embodiment the engine comprises an acoustical drive and a housing containing a gas which is driven at a resonant frequency so as to be maintained in a standing wave. Operation of the engine at acoustic frequencies improves the power density and coefficient of performance. The second thermodynamic medium can be coupled to suitable heat exchangers to utilize the engine as a simple refrigeration device having no mechanical moving parts. Alternatively, the engine is reversible in function so as to be utilizable as a prime mover by coupling it to suitable sources and sinks of heat.

  14. Intrinsically irreversible heat engine

    DOE Patents [OSTI]

    Wheatley, J.C.; Swift, G.W.; Migliori, A.

    1984-01-01

    A class of heat engines based on an intrinsically irreversible heat transfer process is disclosed. In a typical embodiment the engine comprises a compressible fluid that is cyclically compressed and expanded while at the same time being driven in reciprocal motion by a positive displacement drive means. A second thermodynamic medium is maintained in imperfect thermal contact with the fluid and bears a broken thermodynamic symmetry with respect to the fluid. The second thermodynamic medium is a structure adapted to have a low fluid flow impedance with respect to the compressible fluid, and which is further adapted to be in only moderate thermal contact with the fluid. In operation, thermal energy is pumped along the second medium due to a phase lag between the cyclical heating and cooling of the fluid and the resulting heat conduction between the fluid and the medium. In a preferred embodiment the engine comprises an acoustical drive and a housing containing a gas which is driven at a resonant frequency so as to be maintained in a standing wave. Operation of the engine at acoustic frequencies improves the power density and coefficient of performance. The second thermodynamic medium can be coupled to suitable heat exchangers to utilize the engine as a simple refrigeration device having no mechanical moving parts. Alternatively, the engine is reversible in function so as to be utilizable as a prime mover by coupling it to suitable sources and sinks of heat.

  15. Intrinsically irreversible heat engine

    DOE Patents [OSTI]

    Wheatley, J.C.; Swift, G.W.; Migliori, A.

    1984-12-25

    A class of heat engines based on an intrinsically irreversible heat transfer process is disclosed. In a typical embodiment the engine comprises a compressible fluid that is cyclically compressed and expanded while at the same time being driven in reciprocal motion by a positive displacement drive means. A second thermodynamic medium is maintained in imperfect thermal contact with the fluid and bears a broken thermodynamic symmetry with respect to the fluid. The second thermodynamic medium is a structure adapted to have a low fluid flow impedance with respect to the compressible fluid, and which is further adapted to be in only moderate thermal contact with the fluid. In operation, thermal energy is pumped along the second medium due to a phase lag between the cyclical heating and cooling of the fluid and the resulting heat conduction between the fluid and the medium. In a preferred embodiment the engine comprises an acoustical drive and a housing containing a gas which is driven at a resonant frequency so as to be maintained in a standing wave. Operation of the engine at acoustic frequencies improves the power density and coefficient of performance. The second thermodynamic medium can be coupled to suitable heat exchangers to utilize the engine as a simple refrigeration device having no mechanical moving parts. Alternatively, the engine is reversible in function so as to be utilizable as a prime mover by coupling it to suitable sources and sinks of heat. 11 figs.

  16. Engine systems and methods of operating an engine

    DOE Patents [OSTI]

    Scotto, Mark Vincent

    2015-08-25

    One embodiment of the present invention is a unique method for operating an engine. Another embodiment is a unique engine system. Other embodiments include apparatuses, systems, devices, hardware, methods, and combinations for engines and engine systems. Further embodiments, forms, features, aspects, benefits, and advantages of the present application will become apparent from the description and figures provided herewith.

  17. Customer Service Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Customer Service Plan Department of Energy Customer Service Plan - 2011 1 A Message from the Secretary Over the past two and a half years, the Obama Administration and the Department of Energy have worked to make the federal government more open for the American public and its own employees. Through these efforts, we have significantly expanded the amount and breadth of information available online about our programs and services. We have also transformed the way we communicate with the public

  18. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services SERVICES OF THE OFFICE OF THE GENERAL COUNSEL The Office of the General Counsel is responsible for providing legal advice, counsel, and support to the Secretary, Deputy Secretary, and all Departmental elements, except the National Nuclear Security Administration and the Federal Energy Regulatory Commission. This Office assures that the Department operates in compliance with all pertinent laws and regulations. The Immediate Office of the General Counsel directs, manages, and

  19. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Image courtesy of Dennis Schroeder, NREL 24505 Image courtesy of Dennis Schroeder, NREL 24505 The Office of Energy Efficiency and Renewable Energy (EERE) leads DOE efforts to build a strong, clean energy economy, a strategy that is aimed at reducing our reliance on foreign oil, saving families and businesses money, creating middle-class jobs, and reducing pollution. EERE offers the following resources and services: Key Topics: Energy Basics States and Local Communities Jobs,

  20. Energy Service Companies

    Broader source: Energy.gov [DOE]

    Energy service companies (ESCOs) develop, design, build, and fund projects that save energy, reduce energy costs, decrease operations and maintenance costs at their customers' facilities.

  1. General Service LED Lamps

    SciTech Connect (OSTI)

    2012-04-01

    Solid-state lighting program technology fact sheet that compares general service incandescent lamps—i.e., light bulbs—to LED and CFL alternatives.

  2. Service | Open Energy Information

    Open Energy Info (EERE)

    Building Types 1 References EIA CBECS Building Types U.S. Energy Information Administration (Oct 2008) Retrieved from "http:en.openei.orgwindex.php?titleService&oldid27...

  3. In-Office Services:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    prior to and including trial Paid-In-Full 2,820 8 Administrative hearings for Social Security, Veterans, Medicare or Medicaid benefits - Legal services and court...

  4. Temporary Food Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Food Service The SLAC Caf, auditorium and visitor center have been closed and will be replaced with a new Science and User Support Building (SUSB). During this construction...

  5. BPA Power Services (PBL)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Executives Hydro Power 2010 Modified Streamflows BPA Fuel Mix Site Map Other Related Web Sites: BPA Energy Efficiency (EE) BPA Transmission Services BPA Environment, Fish, &...

  6. Mail Services User's Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-07-12

    This Manual provides detailed information on using the Department of Energy (DOE) mail services. Canceled by DOE G 573.1-1.

  7. Procurable Products, Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    printed wiring boards (PWB) using performance and design specifications. Commercial products and services procurement The following items are purchased through Just-In-Time...

  8. Products, Services: Not Procurable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Furrier Physicians Amusements Gaming Produce ArtArtists Gift Shops Public Relations Art Galleries Glass Company Recreation Arts & Crafts GrocersGroceries Relocation Services...

  9. Internal Revenue Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ode X SCHEDULE A (Form 5500) Department of the Treasury Internal Revenue Service Department of Labor Employee Benefits Security Administration Pension Benefit...

  10. Internal Revenue Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Code SCHEDULE SB (Form 5500) Department of the Treasury Internal Revenue Service Department of Labor Employee Benefits Security Administration Pension Benefit...

  11. Web Service Interface (API)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) ...

  12. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The Energy Saver Guide: Tips on Saving Energy and Money at Home is one service offered by Energy Saver. The guide is offered in English and Spanish and is available for ordering, download, and as an e-book. The Energy Saver Guide: Tips on Saving Energy and Money at Home is one service offered by Energy Saver. The guide is offered in English and Spanish and is available for ordering, download, and as an e-book. Energy Saver provides consumers and homeowners with information on

  13. Career Map: Mechanical Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mechanical Engineer Career Map: Mechanical Engineer A mechanical engineer works with a large yellow robotic arm. Mechanical Engineer Position Title Mechanical Engineer Alternate Title(s) Project Engineer, Quality Engineer, Research Engineer, Design Engineer, Sales Engineer Education & Training Level Advanced, Bachelor's degree required, prefer graduate degree Education & Training Level Description Mechanical engineers need a bachelor's degree. A graduate degree is typically needed for

  14. OTEC support services. Quarterly technical progress report No. 10, 15 August 1980-14 November 1980

    SciTech Connect (OSTI)

    1980-11-01

    OTEC system integration, engineering, and management services provided by the VSE Corporation for the DOE Division of Ocean Energy Systems from August 15 through November 14, 1980 are reported. (WHK)

  15. OTEC support services. Quarterly technical progress report No. 11, 15 November 1980-14 February 1981

    SciTech Connect (OSTI)

    1981-02-01

    Technical engineering and management support services for the Ocean Thermal Energy Conversion Program are listed along with their objectives. Progress is reported on the following: technical assessments, OTEC system integration, environment and siting considerations, and transmission subsystem considerations. (MHR)

  16. OTEC support services. Quarterly technical progress report No. 17, 15 May 1982-14 August 1982

    SciTech Connect (OSTI)

    1982-08-01

    Progress relative to accomplishments and relative to meetings, conferences, etc. are reported in the areas of OTEC commercialization support, program technical engineering and instrumentation analysis, technical and management services, OTEC system integration, and transmission subsystem considerations. (LEW)

  17. OTEC support services. Quarterly technical progress report No. 19, November 15, 1982-February 14, 1983

    SciTech Connect (OSTI)

    Not Available

    1983-03-01

    Activities relative to accomplishments and to meetings, conferences, etc. are reported in the areas of: OTEC commercialization support, program technical engineering and instrumentation analysis, technical and management services, OTEC systems integration, and transmission subsystem considerations. (LEW)

  18. Product Lifecycle Management Architecture: A Model Based Systems Engineering Analysis.

    SciTech Connect (OSTI)

    Noonan, Nicholas James

    2015-07-01

    This report is an analysis of the Product Lifecycle Management (PLM) program. The analysis is centered on a need statement generated by a Nuclear Weapons (NW) customer. The need statement captured in this report creates an opportunity for the PLM to provide a robust service as a solution. Lifecycles for both the NW and PLM are analyzed using Model Based System Engineering (MBSE).

  19. The Joys of Nuclear Engineering

    ScienceCinema (OSTI)

    Jon Carmack

    2010-01-08

    Nuclear fuels researcher Jon Carmack talks about the satisfactions of a career in nuclear engineering.

  20. Liquid-sodium thermoacoustic engine

    SciTech Connect (OSTI)

    Migliori, A.; Swift, G.W.

    1988-08-01

    We have constructed a thermoacoustic engine that uses liquid sodium as its working substance. The engine generates acoustic power using heat flowing from a high-temperature source to a low-temperature sink. The measured performance of this engine disagrees significantly with numerical calculations based on our theory of thermoacoustic engines. The efficiency of the engine is a substantial fraction of Carnot's efficiency, and its power density is comparable to that of the conventional heat engines in widespread use. Thus we expect this type of engine to be of practical, economic importance.

  1. International combustion engines; Applied thermosciences

    SciTech Connect (OSTI)

    Ferguson, C.R.

    1985-01-01

    Focusing on thermodynamic analysis - from the requisite first law to more sophisticated applications - and engine design, this book is an introduction to internal combustion engines and their mechanics. It covers the many types of internal combustion engines, including spark ignition, compression ignition, and stratified charge engines, and examines processes, keeping equations of state simple by assuming constant specific heats. Equations are limited to heat engines and later applied to combustion engines. Topics include realistic equations of state, stroichiometry, predictions of chemical equilibrium, engine performance criteria, and friction, which is discussed in terms of the hydrodynamic theory of lubrication and experimental methods such as dimensional analysis.

  2. Single rotor turbine engine

    DOE Patents [OSTI]

    Platts, David A. (Los Alamos, NM)

    2002-01-01

    There has been invented a turbine engine with a single rotor which cools the engine, functions as a radial compressor, pushes air through the engine to the ignition point, and acts as an axial turbine for powering the compressor. The invention engine is designed to use a simple scheme of conventional passage shapes to provide both a radial and axial flow pattern through the single rotor, thereby allowing the radial intake air flow to cool the turbine blades and turbine exhaust gases in an axial flow to be used for energy transfer. In an alternative embodiment, an electric generator is incorporated in the engine to specifically adapt the invention for power generation. Magnets are embedded in the exhaust face of the single rotor proximate to a ring of stationary magnetic cores with windings to provide for the generation of electricity. In this alternative embodiment, the turbine is a radial inflow turbine rather than an axial turbine as used in the first embodiment. Radial inflow passages of conventional design are interleaved with radial compressor passages to allow the intake air to cool the turbine blades.

  3. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Learn more about the ways the Office of Project Management Oversight & Assessments supports the mission of the Department of Energy in the following areas: Project Assessments Project Management Policies and Guidance Project Assessment and Reporting System Project Management Controls/Earned Value Management System Project Management Career Development Program Project Management Performance Metrics Project Management Continuous Improvement Project Management Workshops and

  4. Gas-Fired Reciprocating Engines

    Broader source: Energy.gov [DOE]

    The reciprocating, or piston-driven, engine is a widespread and well-known technology. Also called internal combustion engines, reciprocating engines require fuel, air, compression, and a combustion source to function. Depending on the ignition source, they generally fall into two categories: (1) spark-ignited engines, typically fueled by gasoline or natural gas, and (2) compression-ignited engines, typically fueled by diesel oil fuel.

  5. Ceramic Automotive Stirling Engine Program

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    The Ceramic Automotive Stirling Engine Program evaluated the application of advanced ceramic materials to an automotive Stirling engine. The objective of the program was to evaluate the technical feasibility of utilizing advanced ceramics to increase peak engine operating temperature, and to evaluate the performance benefits of such an increase. Manufacturing cost estimates were also developed for various ceramic engine components and compared with conventional metallic engine component costs.

  6. Needle Federated Search Engine

    Energy Science and Technology Software Center (OSTI)

    2009-12-01

    The Idaho National Laboratory (INL) has combined a number of technologies, tools, and resources to accomplish a new means of federating search results. The resulting product is a search engine called Needle, an open-source-based tool that the INL uses internally for researching across a wide variety of information repositories. Needle has a flexible search interface that allows end users to point at any available data source. A user can select multiple sources such as commercialmore » databases (Web of Science, Engineering Index), external resources (WorldCat, Google Scholar), and internal corporate resources (email, document management system, library collections) in a single interface with one search query. In the future, INL hopes to offer this open-source engine to the public. This session will outline the development processes for making Needle™s search interface and simplifying the federation of internal and external data sources.« less

  7. Free-piston engine

    DOE Patents [OSTI]

    Van Blarigan, Peter (Truckee, CA)

    2001-01-01

    A combustion system which can utilize high compression ratios, short burn durations, and homogeneous fuel/air mixtures in conjunction with low equivalence ratios. In particular, a free-piston, two-stroke autoignition internal combustion engine including an electrical generator having a linear alternator with a double-ended free piston that oscillates inside a closed cylinder is provided. Fuel and air are introduced in a two-stroke cycle fashion on each end, where the cylinder charge is compressed to the point of autoignition without spark plugs. The piston is driven in an oscillating motion as combustion occurs successively on each end. This leads to rapid combustion at almost constant volume for any fuel/air equivalence ratio mixture at very high compression ratios. The engine is characterized by high thermal efficiency and low NO.sub.x emissions. The engine is particularly suited for generating electrical current in a hybrid automobile.

  8. Externally heated valve engine -- An alternative to the Stirling engine

    SciTech Connect (OSTI)

    Kazimierski, Z.; Brzeski, L.

    1996-12-31

    A new concept of the Externally Heated Valve (EHV) engine is presented. The principle of the engine operation is described in the introduction to the paper. Heat delivered to the working medium (air) in the heater, or several heaters working commutatively, can come from a combustion chamber or other heat generator such as nuclear reactors or solar collectors. The engine construction is original entirely different from the well-known Stirling engine. New results of the EHV engine computer modeling are presented. This is connected with a new kind of the annular heater applied to the EHV engine. A whirl motion inside the heater is caused to ensure the proper condition of the heat exchanger during the whole engine cycle. Three heaters working commutatively have been considered in this model. Comparisons between the power and efficiency of the Stirling engine and EHV engine have been performed for the same engine capacity, rotational frequency, maximum and minimum temperatures of the working gas and for the same mean pressures of both the engine cycles. The power of the EHV engine is in this case over three times higher than the Stirling engine power, while the efficiency of both the engines is almost the same.

  9. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Murray, J.L.

    1993-07-20

    A multi bank power plant is described comprising at least a first and a second rotary internal combustion engine connectable together in series, each of the engines comprising: a housing; a cam track internally disposed within the housing and adapted to receive a cam follower; an engine block disposed within the housing and rotatable about a central axis; an output shaft extending axially from each the engine block, each output shaft being coaxial with the other; means for coupling the output shafts together so that the output shafts rotate together in the same direction at the same speed; at least one radially arranged cylinder assembly on each block, each cylinder assembly including a cylinder having a longitudinal axis extending generally radially outwardly from the rotational axis of the block, the cylinder including means defining an end wall, a piston member disposed within the cylinder and adapted to reciprocate within the cylinder; a combustion chamber, means permitting periodic introduction of air and fuel into the combustion chamber, means for causing combustion of a compressed mixture of air and fuel within the combustion chamber, means permitting periodic exhaust of products of combustion of air and fuel from the combustion chamber, and means for imparting forces and motions of the piston within the cylinder to and from the cam track, the means comprising a cam follower operatively connected to the piston; wherein the cam track includes at least a first segment and at least a second segment thereof, the first segment having a generally positive slope wherein the segment has a generally increasing radial distance from the rotational axis of the engine block whereby as a piston moves outwardly in a cylinder on a power stroke while the cam follower is in radial register with the cam track segment, the reactive force of the respective cam follower against the cam track segment acts in a direction tending to impart rotation to the engine block.

  10. Rotary engine research

    SciTech Connect (OSTI)

    Not Available

    1992-06-01

    A development history is presented for NASA's 1983-1991 Rotary Engine Enablement Program, emphasizing the CFD approaches to various problems that were instituted from 1987 to the end of the program. In phase I, a test rig was built to intensively clarify and characterize the stratified-charge rotary engine concept. In phase II, a high pressure, electronically controlled fuel injection system was tested. In phase III, the testing of improved fuel injectors led to the achievement of the stipulated 5 hp/cu inch specific power goal. CFD-aided design of advanced rotor-pocket shapes led to additional performance improvements.

  11. E-Alerts: Combustion, engines, and propellants (reciprocation and rotating combustion engines). E-mail newsletter

    SciTech Connect (OSTI)

    1999-04-01

    Design, performance, and testing of reciprocating and rotating engines of various configurations for all types of propulsion. Includes internal and external combustion engines; engine exhaust systems; engine air systems components; engine structures; stirling and diesel engines.

  12. Career Map: Design Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design Engineer Career Map: Design Engineer A product designer watches as several engineers work on a wind turbine component. Design Engineer Position Title Design Engineer Alternate Title(s) Materials Engineer, Composite Engineer, Product Designer, Structural Engineer Education & Training Level Bachelor's degree required, graduate degree preferred Education & Training Level Description Design engineers typically hold a bachelor's degree or higher in electrical or mechanical engineering

  13. Utility Service Renovations

    Broader source: Energy.gov [DOE]

    Any upgrade to utility service provides an opportunity to revisit a Federal building's electrical loads and costs, but it also may provide an economic way to bundle the upgrade with an onsite renewable electricity project during renovation. Upgrading utility service to the site may involve improving or adding a transformer, upgrading utility meters, or otherwise modifying the interconnection equipment or services with the utility. In some cases, the upgrade may change the tariff structure for the facility and may qualify the property for a different structure with lower overall costs. In all cases, the implementation of renewable energy technologies should be identified during the design phase.

  14. Dual Career Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Options » Dual Career Services Dual Career Services Los Alamos Lab recruits the best minds on the planet and offers job search information and assistance to our dual career spouses or partners. World-class talent often comes in pairs Attracting world-class talent to the Lab is a top priority. Top candidates must often consider the employment needs of a spouse or other family member before choosing to work in Los Alamos. The Dual Career Services program can help solve this challenge by

  15. Services | Department of Energy

    Energy Savers [EERE]

    Services Services The Office of Hearings and Appeals (OHA) is the quasi-judicial arm of the DOE that provides a variety of key services to DOE and the public. OHA has five core functions: 1.) Freedom of Information Act (FOIA) Appeals. The FOIA is one of the principal ways that members of the public can learn about what is happening inside their government. Individuals file more than 2,000 FOIA requests with the DOE each year. When a DOE office denies a FOIA request in whole or in part, the FOIA

  16. Caterpillar`s advanced reciprocating engine for distributed generation markets

    SciTech Connect (OSTI)

    Gerber, G.; Brandes, D.; Reinhart, M.; Nagel, G.; Wong, E.

    1999-11-01

    Competition in energy markets and federal and state policy advocating clean, advanced technologies as means to achieve environmental and global climate change goals are clear drivers to original equipment manufacturers of prime movers. Underpinning competition are the principle of consumer choice to facilitate retail competition, and the desire to improve system and grid reliability. Caterpillar`s Gas Engine Division is responding to the market`s demand for a more efficient, lower lifecycle cost engine with reduced emissions. Cat`s first generation TARGET engine will be positioned to effectively serve distributed generation and combined heat and power (CHP) applications. TARGET (The Advanced Reciprocating Gas Engine Technology) will embody Cat`s product attributes: durability, reliability, and competitively priced life cycle cost products. Further, Caterpillar`s nationwide, fully established dealer sales and service ensure continued product support subsequent to the sale and installation of the product.

  17. Thermoacoustic engines and refrigerators

    SciTech Connect (OSTI)

    Swift, G.W.

    1995-07-01

    We ordinarily think of a sound wave in a gas as consisting of coupled pressure and displacement oscillations. However, temperature oscillations always accompany the pressure changes. The combination of all these oscillations, and their interaction with solid boundaries, produces a rich variety of `thermoacoustic` effects. Although these effects as they occur in every-day life are too small to be noticed, one can harness extremely loud sound waves in acoustically sealed chambers to produce powerful heat engines, heat pumps and refrigerators. Whereas typical engines and refrigerators have crankshaft-coupled pistons or rotating turbines, thermoacoustic engines and refrigerators have at most a single flexing moving part (as in a loudspeaker) with no sliding seals. Thermoacoustic devices may be of practical use where simplicity, reliability or low cost is more important than the highest efficiency (although one cannot say much more about their cost-competitiveness at this early stage). This paper discusses the fundamentals of thermoacoustic engines and refrigerators, research in this field, and their commercial development. 16 refs., 5 figs.

  18. Rotary internal combustion engine

    SciTech Connect (OSTI)

    Le, L.K.

    1990-11-20

    This patent describes an internal combustion engine comprising; a rotary compressor mechanism; a rotary expander mechanism; and combustion chamber means disposed between the compressor mechanism and the expander mechanism, whereby compressed air is delivered to the combustion chamber through the compressor discharge port, and pressurized gas is delivered from the combustion chamber into the expander mechanism through the pressurized gas intake port.

  19. Starting of turbine engines

    SciTech Connect (OSTI)

    Shekleton, J.R.

    1990-05-01

    This patent describes a relatively small turbine engine. It comprises: a rotary turbine wheel; a rotary compressor coupled to the turbine wheel; an annular combustor for receiving air from the compressor and fuel from a fuel source combusting the same and providing gases of combustion to the turbine wheel to drive the same; substantially identical main fuel injectors including fuel injecting nozzles angularly spaced about the compressor; fuel and air from the compressor being introduced into the combustor generally in the tangential direction; a fuel pump; a control schedule valve; and first and second main fuel solenoid valves. The first valve being operable to connect a minority of the injectors to the control schedule valve and the fuel pump for starting the engine, there being an even number of the injectors and the minority of injectors consisting of two diametrically opposite injectors; the first and second valves being operable to connect all of the injectors to the control schedule valve and the pump for causing normal operation of the engine; the engine further being characterized by the absence of start fuel injectors for the combustor.

  20. Rotary engine cooling system

    SciTech Connect (OSTI)

    Jones, C.

    1988-07-26

    A rotary internal combustion engine is described comprising: a rotor housing forming a trochoidal cavity therein; an insert of refractory material received in the recess, an element of a fuel injection and ignition system extending through the housing and insert bores, and the housing having cooling passages extending therethrough. The cooling passages are comprised of drilled holes.

  1. DOE Systems Engineering Methodology

    Office of Environmental Management (EM)

    Systems Engineering Methodology (SEM) Computer System Retirement Guidelines Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Computer System Retirement Guidelines Date: September 2002 Page 1 Rev Date: Table of Contents Section Page Purpose ............................................................................................................................................ 2 Initiation and Distribution

  2. Web Feature Service Validator

    Energy Science and Technology Software Center (OSTI)

    2013-08-01

    This site allows state data contributors to validate their WFS services against a specified schema for tier 3 data. The application uses the USGIN models API at https://github.com/usgin/usginmodels.

  3. Web service performance script

    Energy Science and Technology Software Center (OSTI)

    2009-08-01

    This python script, available from ESRI and modified here, checks a server at specified intervals to ensure that web services remain up and running. If any are found to be off, they are automatically turned back on.

  4. Supervisory Interdisciplinary Civil Engineer/Electrical Engineer (0810/0850)

    Broader source: Energy.gov [DOE]

    THIS IS AN INTERDISCIPLINARY POSITION AND MAY BE FILLED WITH ANY OF THE FOLLOWING OCCUPATIONS: Supervisory Civil Engineer, GS-0810-15 Supervisory Electrical Engineer, GS-0850-15 This position is...

  5. Study of Engine Operating Parameter Effects on GDI Engine Particle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study of Engine Operating Parameter Effects on GDI Engine Particle-Number Emissions Results show that fuel-injection timing is the dominant factor contributing to PN emissions from ...

  6. Test Circuit Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test Circuit Service Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds 100G SDN Testbed Dark Fiber Testbed Test Circuit Service Testbed Results Current Testbed Research Previous Testbed Research Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network

  7. ORISE: Health physics services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health physics services Nuclear power plant The Oak Ridge Institute for Science and Education (ORISE) offers comprehensive health physics services in a number of technical areas for the U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC), as well as other federal and state agencies. From radiological facility audits and reviews to dose modeling and technical evaluations, ORISE is nationally-recognized for its health physics support to decontamination and decommissioning

  8. In-Office Services:

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office Services: Meet with an experienced attorney who can advise and represent you. Attorney Services include: * Reviewing and preparing documents * Making follow-up calls and writing letters * Providing legal advice and consultation * Representation in court Comprehensive Coverage protects you from costly legal fees. Most covered legal matters are 100% paid-in-full when you work with a Network Attorney. (See reverse side of flyer for details.) Reduced Fee Benefits are available for matters not

  9. Services | Department of Energy

    Energy Savers [EERE]

    Services Services CD-0 Approval of Mission Need CD-1 Approval of Alternative CD-4 Approval of Project Completion CD-3 Approval to Start Construction CD-2 Approval of Performance Baseline Financial Closeout Complete CD-0 CD-1 CD-4 CD-3 CD-2 INITIATION DEFINITION EXECUTION CLOSEOUT Resource Center The ultimate objective of DOE's Project Management System is to deliver capital asset projects within the original performance baseline, on schedule, within budget, and fully capable of meeting mission

  10. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Expert Evaluations of Management Performance in DOE Health, Safety and Security The U.S. Department of Energy's (DOE) Office of Enterprise Assessments (EA) provides expert evaluations of management performance in safety, security and other areas by seasoned experts who are independent of line management and will ensure that training reflects the most current Departmental policy on safety and security issues. EA serves as an important check-and-balance that meets the

  11. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Integrated Environment, Health, Safety and Security Management The U.S. Department of Energy's (DOE) highest level commitment to ensure the protection of its workers, the environment and the communities that surround DOE facilities, is supported by corporate-level leadership and strategic vision to coordinate and integrate vital health, safety and security programs. The Office of Environment, Health, Safety and Security (EHSS) is established as DOE's central organization

  12. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Document Library The Office of Energy Policy and Systems Analysis produces a variety of reports, analyses and papers on a number of energy topics. Check back for archived versions of new documents and reference materials as they are released. Report: U.S. Energy Sector Vulnerabilities to Climate Change and Extreme Weather July 10, 2013 This report-part of the Administration's efforts to support national climate change adaptation planning through the Interagency Climate Change

  13. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The Office of International Affairs supports the Secretary of Energy and other Departmental elements with a range of expertise on international energy activities. Among other areas, IA experts maintain extensive knowledge of the following issues: International Energy Policy Regional and country-specific energy policies and practices, technology developments, and market conditions in Africa, the Americas, Asia, Europe, Eurasia, and the Middle East Bilateral and multilateral

  14. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The Office of Indian Energy coordinates and manages the government-to-government and intertribal collaboration involved in carrying out all DOE tribal energy-related activities and initiatives prescribed through the Energy Policy Act of 2005. Learn more about the Office of Indian Energy program initiatives. Indian Country Energy and Infrastructure Working Group Established by Energy Secretary Steven Chu, the Indian Country Energy and Infrastructure Working Group guides the

  15. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The responsibilities of stakeholder relations are achieved through public outreach to and input from those individuals, groups, host communities, and other entities in the public and private sectors that are interested in or affected by any of the U.S. Department of Energy's (DOE or Department's) activities and decisions. Stakeholder Relations Information from Office of Legacy Management (LM) record holdings are shared with LM stakeholders following several formal request

  16. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services OE plays a major role in addressing immediate challenges to America's energy security, while sustaining applied research into new technologies and implementing policies to meet the challenges we will face in the future. Electricity Advisory Committee (EAC) Technology Development Electricity Policy Coordination & Implementation DOE Grid Tech Team Energy Assurance Cybersecurity Provides advice to the U.S. Department of Energy in implementing the Energy Policy Act of 2005,

  17. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services The Oak Ridge Office of Environmental Management has numerous and diverse responsibilities. Our ultimate mission is to remove environmental contamination to improve safety for local employees and residents and open land for future uses. Site cleanup is essential to remove risks and hazards at the site. In addition, removing facilities and legacy materials creates waste, and we must ensure waste is properly processed, disposed, and managed. However, to accomplish any of these

  18. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Links to related sites within DOE SBIR/STTR The purpose of this website is to provide information to small businesses interested in applying for DOE SBIR & STTR grants. SBIR funding opportunities Office of Science User facilities The Office of Science national scientific user facilities provide researchers with the most advanced tools of modern science including accelerators, colliders, supercomputers, light sources and neutron sources, as well as facilities for studying

  19. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Secretary Ernest Moniz takes a holistic view to diversity, recognizing that the goal of ensuring equal access to participation in the Department's programs and policies comes through in our workforce, our partners, our research, our policies, our education efforts, and our work with the general public. We invite you to browse our website to learn more about the ways we'd like to work with you to support the mission of the Energy Department. Minority Business and Economic

  20. Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Services Office of Inspector General Hotline: The Office of Inspector General (OIG) maintains a Hotline to facilitate the reporting of allegations of fraud, waste, abuse, or mismanagement in U.S. Department of Energy (DOE) programs or operations. If you wish to report such allegations, you may call, send a letter, or email the OIG Hotline as identified at the right. Allegations may be reported by DOE employees, DOE contractors, or the general public. Issues that should be reported:

  1. Clinton Engineer Works map | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Clinton Engineer Works map Clinton Engineer Works map

  2. United States Forest Service - Forest Service Environmental Appeals...

    Open Energy Info (EERE)

    Responses Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service Environmental Appeals Responses Abstract...

  3. United States Forest Service - Forest Service Schedule of Proposed...

    Open Energy Info (EERE)

    Actions Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service Schedule of Proposed Actions Abstract The...

  4. Argonne National Laboratory's Omnivorous Engine

    SciTech Connect (OSTI)

    Thomas Wallner

    2009-10-16

    Why can't an engine run on any fuel? Argonne is designing an omnivorous engine that can run on any blend of gasoline, ethanol or butanoland calibrate itself to burn that fuel most efficiently.

  5. Free-piston Stirling engine

    SciTech Connect (OSTI)

    Berggren, R.W.; Moynihan, T.M.

    1982-09-01

    A free-piston Stirling engine/linear alternator system (FPSE-010-3), developed under previous Department of Energy (DOE) funding, has been used as a test bed for evaluating selected Stirling engine loss mechanisms. The engine is particularly suited to test-bed operation because engine performance can be evaluated over a wide range of operating conditions; system instrumentation is capable of measuring the effects of system component changes; and modular engine design facilitates the evaluation of alternate component configurations. Extensive testing was performed to establish the operating characteristics of a base-line engine configuration and to characterize specific losses within a Stirling engine. Significant variations in engine performance were observed as the displacer seal clearance was varied. This paper presents selected results from the base-line and displacer seal clearance tests.

  6. Argonne National Laboratory's Omnivorous Engine

    ScienceCinema (OSTI)

    Thomas Wallner

    2010-01-08

    Why can't an engine run on any fuel? Argonne is designing an omnivorous engine that can run on any blend of gasoline, ethanol or butanol?and calibrate itself to burn that fuel most efficiently.

  7. Understanding Stirling engines. Technical paper

    SciTech Connect (OSTI)

    Beale, W.

    1984-01-01

    The paper describes the basic Stirling engine, as well as some of the most promising modern varieties. The intent is to familiarize people in developing countries with the engine's operation and range of applications.

  8. Cummins Rocky Mount Engine Plant

    Broader source: Energy.gov [DOE]

    This presentation by Cummins, Inc. at the 2015 World Energy Engineering Congress shares the Rocky Mount Engine Plant’s experience with achieving certification to Superior Energy Performance® (SEP™)...

  9. Career Map: Aerospace Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aerospace Engineer Career Map: Aerospace Engineer An aerospace engineer stands in front of a drivetrain testing machine. Aerospace Engineer Position Title Aerospace Engineer Alternate Title(s) Aeronautical Engineer Education & Training Level Advanced, Bachelor's required, prefer graduate degree Education & Training Level Description Aerospace engineers must have a bachelor's degree in aerospace engineering or another field of engineering or science related to aerospace systems. Brief job

  10. Career Map: Project Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Engineer Career Map: Project Engineer project_engineer.jpg Project Engineer Position Title Project Engineer Alternate Title(s) Construction Engineer, Project Development Engineer Education & Training Level Advanced, Bachelors required Education & Training Level Description Project engineers usually have a bachelor's degree in mechanical, aerospace or electrical engineering. They may also have a degree in other technical disciplines or construction management. Employers also value

  11. Sandia Energy - SCADA Engineering Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Solutions Home Stationary Power Safety, Security & Resilience of Energy Infrastructure Grid Modernization Cyber Security for Electric Infrastructure National...

  12. Join the Call: One Million Hours of STEM Volunteer Service | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Call: One Million Hours of STEM Volunteer Service Join the Call: One Million Hours of STEM Volunteer Service June 30, 2015 - 10:19am Addthis Join the Call: One Million Hours of STEM Volunteer Service America's ability to meet the demands of its energy future depends on having a trained, dedicated science, technology, engineering, and mathematics (STEM) workforce. To answer this call, the Energy Department has an obligation to do all that is possible to attract, engage, educate, and

  13. Advanced engineering analysis

    SciTech Connect (OSTI)

    Freeman, W.R.

    1992-11-01

    The Advanced Engineering Analysis project is being used to improve the breadth of engineering analysis types, the particular phenomena which may be simulated, and also increase the accuracy and usability of the results of both new and current types of simulations and analyses. This is an interim report covering several topics under this project. Information on two new implementations of failure criteria for metal forming, the implementation of coupled fluid flow/heat transfer analysis capabilities, the integration of experimental shock and vibration test data with analyses, a correction to a contact solution problem with a 3-D parabolic brick finite element, and the development and implementation of a file translator to link IDEAS to DYNA3D is provided in this report.

  14. Electrochemical heat engine

    DOE Patents [OSTI]

    Elliott, Guy R. B. (Los Alamos, NM); Holley, Charles E. (Alcalde, NM); Houseman, Barton L. (Cockeysville, MD); Sibbitt, Jr., Wilmer L. (Albuquerque, NM)

    1978-01-01

    Electrochemical heat engines produce electrochemical work, and mechanical motion is limited to valve and switching actions as the heat-to-work cycles are performed. The electrochemical cells of said heat engines use molten or solid electrolytes at high temperatures. One or more reactions in the cycle will generate a gas at high temperature which can be condensed at a lower temperature with later return of the condensate to electrochemical cells. Sodium, potassium, and cesium are used as the working gases for high temperature cells (above 600 K) with halogen gases or volatile halides being used at lower temperature. Carbonates and halides are used as molten electrolytes and the solid electrolyte in these melts can also be used as a cell separator.

  15. Internal combustion engine

    DOE Patents [OSTI]

    Baker, Quentin A.; Mecredy, Henry E.; O'Neal, Glenn B.

    1991-01-01

    An improved engine is provided that more efficiently consumes difficult fuels such as coal slurries or powdered coal. The engine includes a precombustion chamber having a portion thereof formed by an ignition plug. The precombustion chamber is arranged so that when the piston is proximate the head, the precombustion chamber is sealed from the main cylinder or the main combustion chamber and when the piston is remote from the head, the precombustion chamber and main combustion chamber are in communication. The time for burning of fuel in the precombustion chamber can be regulated by the distance required to move the piston from the top dead center position to the position wherein the precombustion chamber and main combustion chamber are in communication.

  16. Eastern Power Customer Services Manager

    Broader source: Energy.gov [DOE]

    This position is located in the Eastern Power Services organization (PSE) of Northwest Requirements Marketing, Power Services, and Bonneville Power Administration (BPA). Northwest (NW) Requirements...

  17. Western Power Customer Services Manager

    Broader source: Energy.gov [DOE]

    This position is located in the Western Power Services organization (PSW) of Northwest Requirements Marketing, Power Services, and Bonneville Power Administration (BPA). Northwest (NW) Requirements...

  18. Kirsten Fagnan NERSC User Services"

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JGI Compute Resource - 16 - compute nodes gpint nodes high priority & interacti ve nodes fpga web services database services login nodes filesyst ems ssh genepool.nersc.gov http:...

  19. Scotoil Services | Open Energy Information

    Open Energy Info (EERE)

    Services Product: Division of the Scotoil Group that delivers the group's suite of environmental services. Coordinates: 46.975867, -123.81598 Show Map Loading map......

  20. Vehicle Technologies Office: 2014 Advanced Combustion Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research and...

  1. Atlanta Chemical Engineering LLC | Open Energy Information

    Open Energy Info (EERE)

    Atlanta Chemical Engineering LLC Jump to: navigation, search Logo: Atlanta Chemical Engineering LLC Name: Atlanta Chemical Engineering LLC Place: Marietta, Georgia Country: United...

  2. BGA Engineering LLC | Open Energy Information

    Open Energy Info (EERE)

    search Name: BGA Engineering LLC Place: Glen Rock, New Jersey Zip: 7452 Sector: Solar Product: Engineering firm specialising in substation engineering and design, power plant...

  3. Sandia National Laboratories: Careers: Aerospace Engineering

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aerospace Engineering Aerospace imagery Sandia's aerospace engineers have provided critical data for the design and analysis of flight vehicles since the 1950s. Aerospace engineers...

  4. Hydrogen Engine Center HEC | Open Energy Information

    Open Energy Info (EERE)

    Engine Center HEC Jump to: navigation, search Name: Hydrogen Engine Center (HEC) Place: Algona, Iowa Zip: IA 50511 Sector: Hydro, Hydrogen Product: The Hydrogen Engine Center (HEC)...

  5. Tasco Engineering Inc | Open Energy Information

    Open Energy Info (EERE)

    Tasco Engineering Inc Jump to: navigation, search Name: Tasco Engineering Inc Place: Lehi, Utah Zip: 84043 Sector: Hydro, Solar, Wind energy Product: Power engineering firm with...

  6. Vehicle Technologies Office: 2014 Advanced Combustion Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2014 Advanced Combustion Engine Annual Progress Report Vehicle Technologies Office: 2014 Advanced Combustion Engine Annual Progress Report The Advanced Combustion Engine research...

  7. Photonically Engineered Incandescent Emitter

    DOE Patents [OSTI]

    Gee, James M. (Albuquerque, NM); Lin, Shawn-Yu (Albuquerque, NM); Fleming, James G. (Albuquerque, NM); Moreno, James B. (Albuquerque, NM)

    2005-03-22

    A photonically engineered incandescence is disclosed. The emitter materials and photonic crystal structure can be chosen to modify or suppress thermal radiation above a cutoff wavelength, causing the emitter to selectively emit in the visible and near-infrared portions of the spectrum. An efficient incandescent lamp is enabled thereby. A method for fabricating a three-dimensional photonic crystal of a structural material, suitable for the incandescent emitter, is also disclosed.

  8. Modular Aneutronic Fusion Engine

    SciTech Connect (OSTI)

    Gary Pajer, Yosef Razin, Michael Paluszek, A.H. Glasser and Samuel Cohen

    2012-05-11

    NASA's JUNO mission will arrive at Jupiter in July 2016, after nearly five years in space. Since operational costs tend to rise with mission time, minimizing such times becomes a top priority. We present the conceptual design for a 10MW aneutronic fusion engine with high exhaust velocities that would reduce transit time for a Jupiter mission to eighteen months and enable more challenging exploration missions in the solar system and beyond. __________________________________________________

  9. Stirling cycle engine

    DOE Patents [OSTI]

    Lundholm, Gunnar (Lund, SE)

    1983-01-01

    In a Stirling cycle engine having a plurality of working gas charges separated by pistons reciprocating in cylinders, the total gas content is minimized and the mean pressure equalization among the serial cylinders is improved by using two piston rings axially spaced at least as much as the piston stroke and by providing a duct in the cylinder wall opening in the space between the two piston rings and leading to a source of minimum or maximum working gas pressure.

  10. The ESnet Engineering Team

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fasterdata IPv6 Network Network Performance Tools The ESnet Engineering Team Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home »

  11. Multicylinder compound engine

    SciTech Connect (OSTI)

    Paul, M.A.; Paul, A.

    1990-10-23

    This patent describes a compound, rotary-reciprocal engine. It comprises: a two-cycle reciprocator having cylinders, each cylinder having at least one piston arranged for reciprocation in the cylinder in a cycled operation with a timed air input to the cylinder and a timed exhaust from the cylinder; a compressed air intake and combustion gas exit in each cylinder of the reciprocator; fuel injection means for injecting fuel into the cylinders at appropriate times in the cycled operation; and, a rotocharger.

  12. Ram jet engine

    SciTech Connect (OSTI)

    Crispin, B.; Pohl, W.D.; Thomaier, D.; Voss, N.

    1983-11-29

    In a ram jet engine, a tubular combustion chamber is divided into a flame chamber followed by a mixing chamber. The ram air is supplied through intake diffusers located on the exterior of the combustion chamber. The intake diffusers supply combustion air directly into the flame chamber and secondary air is conveyed along the exterior of the combustion chambers and then supplied directly into the mixing chamber.

  13. Cleaner, More Efficient Diesel Engines

    SciTech Connect (OSTI)

    Musculus, Mark

    2013-08-13

    Mark Musculus, an engine combustion scientist at Sandia National Laboratories, led a study that outlines the science base for auto and engine manufacturers to build the next generation of cleaner, more efficient engines using low-temperature combustion. Here, Musculus discusses the work at Sandia's Combustion Research Facility.

  14. Cleaner, More Efficient Diesel Engines

    ScienceCinema (OSTI)

    Musculus, Mark

    2014-02-26

    Mark Musculus, an engine combustion scientist at Sandia National Laboratories, led a study that outlines the science base for auto and engine manufacturers to build the next generation of cleaner, more efficient engines using low-temperature combustion. Here, Musculus discusses the work at Sandia's Combustion Research Facility.

  15. Kinematic Stirling engine as an energy conversion subsystem for paraboloidal dish solar thermal power plants

    SciTech Connect (OSTI)

    Bowyer, J.M.

    1984-04-15

    The potential of a suitably designed and economically manufactured Stirling engine as the energy conversion subsystem of a paraboloidal dish-Stirling solar thermal power module has been estimated. Results obtained by elementary cycle analyses have been shown to match quite well the performance characteristics of an advanced kinematic Stirling engine, the United Stirling P-40, as established by current prototypes of the engine and by a more sophisticated analytic model of its advanced derivative. In addition to performance, brief consideration has been given to other Stirling engine criteria such as durability, reliability, and serviceability. Production costs have not been considered here.

  16. FY05 Engineering Research and Technology Report (Technical Report) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect FY05 Engineering Research and Technology Report Citation Details In-Document Search Title: FY05 Engineering Research and Technology Report × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is also

  17. PROP re-refined oil engine test performance

    SciTech Connect (OSTI)

    Linnard, R.E.

    1980-11-01

    Using conventional, commercially-available nonproprietary (to Phillips) additive treatments, engine test programs have successfully demonstrated Phillips Re-refined Oil Process (PROP) oils' compliance with the performance requirements of MIL-L-46152A and API Services SE/CC. This paper reports on the engine testing experience with PROP refined oils as produced in a full-scale 2 MM GPY PROP plant operating with Buyer-collected used oil feedstocks. Comment is also made on the status of the first two PROP plants, one built for the state of North Carolina and the other for Mohawk Oil Company, Ltd., Vancouver B.C., Canada.

  18. ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: INFORMATIONAL SERVICES RECORDS ADMINISTRATIVE RECORDS SCHEDULE 14: INFORMATIONAL SERVICES RECORDS This schedule covers certain records pertaining to informational services ...

  19. Environmental, safety, and health engineering

    SciTech Connect (OSTI)

    Woodside, G.; Kocurek, D.

    1997-12-31

    A complete guide to environmental, safety, and health engineering, including an overview of EPA and OSHA regulations; principles of environmental engineering, including pollution prevention, waste and wastewater treatment and disposal, environmental statistics, air emissions and abatement engineering, and hazardous waste storage and containment; principles of safety engineering, including safety management, equipment safety, fire and life safety, process and system safety, confined space safety, and construction safety; and principles of industrial hygiene/occupational health engineering including chemical hazard assessment, personal protective equipment, industrial ventilation, ionizing and nonionizing radiation, noise, and ergonomics.

  20. Gaseous-fuel engine technology

    SciTech Connect (OSTI)

    1995-12-31

    This publication contains three distinct groups of papers covering gaseous-fuel injection and control, gaseous-fuel engine projects, and gaseous-fuel engine/vehicle applications. Contents include: ultra rapid natural gas port injection; a CNG specific fuel injector using latching solenoid technology; development of an electronically-controlled natural gas-fueled John Deere PowerTech 8.1L engine; adapting a Geo Metro to run on natural gas using fuel-injection technology; behavior of a closed loop controlled air valve type mixer on a natural gas fueled engine under transient operation; and a turbocharged lean-burn 4.3 liter natural gas engine.

  1. Technical Services Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TSA-AGMT.DOC (9/06/01) 04/14/13 Technical Services Agreement No. TSA- The National Renewable Energy Laboratory (hereinafter "NREL") Operating under Prime Contract No. DE-AC36-08GO28308 for the Department of Energy And <Sponsor>` (hereinafter "Sponsor") I. Parties to the Technical Services Agreement. The Alliance for Sustainable Energy, LLC as Management and Operating (M&O) Contractor for the National Renewable Energy Laboratory ("Contractor"), under U.S.

  2. Business Services | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Human Resources Jefferson Lab Business Services Jefferson Lab provides opportunities for both large and small businesses to engage with the lab and its scientific mission. A D D I T I O N A L L I N K S: E-Verify Solicitations Bidder Applications Vendor Toolbox Contacts Tech Transfer top-right bottom-left-corner bottom-right-corner Business Services Jefferson Lab spends approximately $73 million annually through procurements to a diverse group of large and small businesses for a broad range of

  3. VT Nuclear Services ltd | Open Energy Information

    Open Energy Info (EERE)

    VT Nuclear Services ltd Jump to: navigation, search Name: VT Nuclear Services ltd Place: Warrington, United Kingdom Zip: WA4 4BP Sector: Services Product: VT Nuclear Services...

  4. Customer Services Handbook, 2010, Office of Administration |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Customer Services Handbook, 2010, Office of Administration Customer Services Handbook, 2010, Office of Administration Customer Services Handbook PDF icon Customer Services ...

  5. Alternative Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Services Jump to: navigation, search Logo: Alternative Energy Services Name: Alternative Energy Services Place: Florida Product: renewable energy products and services Phone...

  6. Power Services Site Map (pbl/help)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Contact Power Services | Help About Power Services Power Services Home Page Power Services Short Cuts Other Related Web Sites BPA Energy Efficiency Volunteer Energy...

  7. Office of Headquarters Procurement Services - Employee Customer Service

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards | Department of Energy Office of Headquarters Procurement Services - Employee Customer Service Standards Office of Headquarters Procurement Services - Employee Customer Service Standards CUSTOMER FOCUS The Office of Headquarters Procurement Services (MA-64) serves a variety of customers in the performance of its acquisition and financial assistance mission. Primary among its many customers is each of the Department of Energy Headquarters program offices. MA-64 continually seeks to

  8. Honda motor company's CVCC engine

    SciTech Connect (OSTI)

    Abernathy, W.J.; Ronan, L.

    1980-07-01

    Honda Motor Company of Japan in a four-year period from 1968 to 1872 designed, tested, and mass-produced a stratified charge engine, the CVCC, which in comparison to conventional engines of similar output at the time was lower in CO, HC and NO/sub x/ emissions and higher in fuel economy. Honda developed the CVCC engine without government assistance or outside help. Honda's success came at a time when steadily increasing fuel costs and the various provisions of the Clean Air Act had forced US automakers to consider possible alternatives to the conventional gasoline engine. While most major engine manufacturers had investigated some form of stratified charge engine, Honda's CVCC was the only one to find successful market application. This case study examines the circumstances surrounding the development of the CVCC engine and its introduction into the Japanese and American markets.

  9. Analysis Activities at Idaho National Engineering & Environmental...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Activities at Idaho National Engineering & Environmental Laboratory Analysis Activities at Idaho National Engineering & Environmental Laboratory Presentation on INEENL's analysis...

  10. SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management...

  11. Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Turbocharged Direct Injection (GTDI) Engine Development Vehicle Technologies Office Merit Review 2014: Advanced Gasoline Turbocharged Direct Injection (GTDI) Engine ...

  12. Academic-Industry Collaboration (AIC) - Synchrophasor Engineering...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Synchrophasor Engineering Education Program: Information Exchange Webinar (March 6, 2014) Academic-Industry Collaboration (AIC) - Synchrophasor Engineering Education Program:...

  13. Optimization of Advanced Diesel Engine Combustion Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Optimization of Advanced Diesel Engine Combustion Strategies Optimization of Advanced Diesel Engine Combustion Strategies Computational Fluid Dynamics ...

  14. China National Machinery Industry Complete Engineering Corporation...

    Open Energy Info (EERE)

    Industry Complete Engineering Corporation CMCEC Jump to: navigation, search Name: China National Machinery Industry Complete Engineering Corporation (CMCEC) Place: Beijing,...

  15. CONFIRMATORY SURVEY RESULTS FOR PORTIONS OF THE ABB COMBUSTION ENGINEERING SITE IN WINDSOR, CONNECTICUT DURING THE FALL OF 2011

    SciTech Connect (OSTI)

    Wade C. Adams

    2011-12-09

    From the mid-1950s until mid-2000, the Combustion Engineering, Inc. (CE) site in Windsor, Connecticut (Figure A-1) was involved in the research, development, engineering, production, and servicing of nuclear fuels, systems, and services. The site is currently undergoing decommissioning that will lead to license termination and unrestricted release in accordance with the requirements of the License Termination Rule in 10 CFR Part 20, Subpart E. Asea Brown Boveri Incorporated (ABB) has been decommissioning the CE site since 2001.

  16. MATRIX AND VECTOR SERVICES

    Energy Science and Technology Software Center (OSTI)

    2001-10-18

    PETRA V2 provides matrix and vector services and the ability construct, query, and use matrix and vector objects that are used and computed by TRILINOS solvers. It provides all basic matr5ix and vector operations for solvers in TRILINOS.

  17. Analytical Services Management System

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    Analytical Services Management System (ASMS) provides sample management services. Sample management includes sample planning for analytical requests, sample tracking for shipping and receiving by the laboratory, receipt of the analytical data deliverable, processing the deliverable and payment of the laboratory conducting the analyses. ASMS is a web based application that provides the ability to manage these activities at multiple locations for different customers. ASMS provides for the assignment of single to multiple samples for standardmore »chemical and radiochemical analyses. ASMS is a flexible system which allows the users to request analyses by line item code. Line item codes are selected based on the Basic Ordering Agreement (BOA) format for contracting with participating laboratories. ASMS also allows contracting with non-BOA laboratories using a similar line item code contracting format for their services. ASMS allows sample and analysis tracking from sample planning and collection in the field through sample shipment, laboratory sample receipt, laboratory analysis and submittal of the requested analyses, electronic data transfer, and payment of the laboratories for the completed analyses. The software when in operation contains business sensitive material that is used as a principal portion of the Kaiser Analytical Management Services business model. The software version provided is the most recent version, however the copy of the application does not contain business sensitive data from the associated Oracle tables such as contract information or price per line item code.« less

  18. Acoustical heat pumping engine

    DOE Patents [OSTI]

    Wheatley, J.C.; Swift, G.W.; Migliori, A.

    1983-08-16

    The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium. 2 figs.

  19. Acoustical heat pumping engine

    DOE Patents [OSTI]

    Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Los Alamos, NM); Migliori, Albert (Santa Fe, NM)

    1983-08-16

    The disclosure is directed to an acoustical heat pumping engine without moving seals. A tubular housing holds a compressible fluid capable of supporting an acoustical standing wave. An acoustical driver is disposed at one end of the housing and the other end is capped. A second thermodynamic medium is disposed in the housing near to but spaced from the capped end. Heat is pumped along the second thermodynamic medium toward the capped end as a consequence both of the pressure oscillation due to the driver and imperfect thermal contact between the fluid and the second thermodynamic medium.

  20. A loaded thermoacoustic engine

    SciTech Connect (OSTI)

    Olson, J.R.; Swift, G.W.

    1995-11-01

    Measurements and analysis of the performance of a thermoacoustic engine driving a dissipative load are presented. The effect of the load can be explained qualitatively using a simple low-amplitude approximation and quantitatively by invoking a more accurate low-amplitude numerical solution. The heater power {ital @};DQ and hot-end temperature {ital T}{sub {ital H}} are found to be simple functions of the load impedance and the unloaded values of {ital @};DQ and {ital T}{sub {ital H}}. {copyright} {ital 1995} {ital Acoustical} {ital Society} {ital of} {ital America}.

  1. Stratified cross combustion engine

    SciTech Connect (OSTI)

    Rhoads, J.L.

    1981-06-23

    A piston engine is provided in which adjacent cylinder pairs share a common combustion chamber and the pistons are mounted to reciprocate substantially in phase, one of the pistons in each piston pair receiving a rich mixture which is ignited by a sparkplug in that cylinder, with the other cylinder in the cylinder pair being passive in its preferred form, and receiving through a separate intake valve either pure air or a leaner mixture into which the combusted richer mixture pours, insuring that the greatest combustion possible resulting in the greatest percentage of carbon dioxide formation as opposed to carbon monoxide is created.

  2. HANFORD ENGINEER WORKS

    Office of Legacy Management (LM)

    HANFORD ENGINEER WORKS IJd *P-t - - ~~~ssiticatiC+n cwcetted rat G.E. NUCLEONICS PROJECT xi I ~@L.%&~--G-ENERAI,@ ELECTRIC z ,m ._.__.-. _ I--..-. By Authority of. COMPANY ._ Atmic Energy Commission Office of Hanford Dire&xl Operations Riohland, Washington Attention; Mr. Carleton Shugg, Manager ./ ALPKA-ROLLED EL'GIL%I jw -879 ' . *_ a. f' Richland, Washington February 6, 1948 , Thla Dclc.Jv-<en! :-; . ' - -*...-- f_ ~~~.s No .__. ._. .s / ~. - J-LccIp%. Fr:*? fi This will con&rm

  3. RESEARCH AND ENGINEERING COMPANY

    Office of Legacy Management (LM)

    ?' $ 5 . . 7 pi -ON RESEARCH AND ENGINEERING COMPANY CLINTON TOWNSHIP, ROUTE 22 EAST, ANNANDALE, NEW iERSEY 08801 July 18, 1988 Mr. Ken Wills Weston/OTS 20030 Century Blvd Suite 301 Germantown, MD 20874 Dear Ken, Per our conversation on July 11, 1988, enclosed is a current plot plan of the Linden Technology Center (old Standard Oil Development Company site). I hope this satisfies your in- formation needs regarding the study you are doing concerning AEC contractor sites. We believe we have

  4. Incorporation of pollution prevention into the engineering command media

    SciTech Connect (OSTI)

    Harrington, E.; Hammonds, C.

    1997-10-08

    It has long been recognized that incorporation of pollution prevention (P2) into projects during the design phase yields superior results as compared to modification of facilities after construction. Generation of waste during construction can be minimized, products containing recycled materials can be incorporated into the facility, and the processes or systems can be optimized for P2 from the beginning. However, design engineers must have the proper mindset and training in order to achieve this, since standard engineering practice does not necessarily lead to construction of systems that are optimized for P2. It was determined that incorporation of P2 principles and methods into command media that govern the conduct of design and construction was one way of achieving P2 objectives during design. This would incorporate certain P2 elements into criteria and standard designs so that these elements are automatically incorporated into the designs. The Central Engineering Services (CES) Command Media, which provide direction, methodology, and criteria for performance of engineering design and construction, consist of Engineering Procedures, Master Design Criteria, Technical Specifications, and Engineering Standards. Incorporated in these documents are regulatory requirements, national consensus codes and standards, accepted and proven practices and designs, as well as DOE Orders governing design and construction. The documents were reviewed to identify potential areas into which P2 principles, practices, and methodologies could be incorporated.

  5. Mail Services | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mail Services General Information: Mail Services provides U.S. Postal Service (USPS) and ISU campus mail receiving, sorting and outbound service. This service is available for all Ames Laboratory official business. Quick Links to Schedules: Hours Pickup Delivery Stamped mail -outbound Mail to be posted/metered Campus mail to Ames Lab destinations Campus mail to Non-Ames Lab destinations Campus mail - inbound USPS mail - inbound Hours (back) The mail room in 153 Spedding is accessible to pick up

  6. Climate Engineering with Stratospheric Aerosols and Associated Engineering Parameters

    SciTech Connect (OSTI)

    Kravitz, Benjamin S.

    2013-02-12

    Climate engineering with stratospheric aerosols, an idea inspired by large volcaniceruptions, could cool the Earths surface and thus alleviate some of the predicted dangerous impacts of anthropogenic climate change. However, the effectiveness of climate engineering to achieve a particular climate goal, and any associated side effects, depend on certain aerosol parameters and how the aerosols are deployed in the stratosphere. Through the examples of sulfate and black carbon aerosols, this paper examines "engineering" parameters-aerosol composition, aerosol size, and spatial and temporal variations in deployment-for stratospheric climate engineering. The effects of climate engineering are sensitive to these parameters, suggesting that a particle could be found ordesigned to achieve specific desired climate outcomes. This prospect opens the possibility for discussion of societal goals for climate engineering.

  7. Knock-free engine control system for turbocharged automotive engine

    SciTech Connect (OSTI)

    Hirabayashi, Y.

    1985-04-09

    In a turbocharged internal combustion engine, in order to optimize engine torque output spark timing control and boost pressure control are coordinated in such a manner that spark advance angle is adjusted only when the measured boost pressure equals a predetermined value and is allowed to vary only within a specified range advanced from a reference value derived from an empirical memory table on the basis of engine speed and boost pressure. When engine operating conditions are such that spark advance angle would fall outside of the specified range, spark advance angle is then held at the empirical value and boost pressure is adjusted in order to optimize engine torque. The coordinated control system can also be designed to respond to exhaust gas temperature on a first-priority basis, i.e., when exhaust temperature is sensed to be dangerously high, boost pressure is reduced regardless of other engine conditions.

  8. The effect of thermal barrier coated piston crown on engine characteristics

    SciTech Connect (OSTI)

    Chan, S.H.; Khor, K.A.

    2000-02-01

    While there have been numerous research papers in recent years describing the theoretical benefits obtained from the use of ceramic components in reciprocating engines, the amount of literature that describes practical results is very limited. Although successes have been reported and ceramic components are now in service in production engines, mainly for reduced in-cylinder heat rejection, many researchers have experienced failures or a drop in engine performance. This article presents the work completed on a low heat rejection engine. Extensive experiments were conducted on a three-cylinder SI Daihatsu engine with piston crowns coated with a layer of ceramic, which consisted of yttria-stabilized zirconia (YSZ). Measurement and comparison of engine performance, in particular fuel consumption, were made before and after the application of YSZ coatings deposited onto the piston crowns. The details of the cylinder pressures during the combustion process were also investigated.

  9. Rotary engine and method

    SciTech Connect (OSTI)

    Overman, K.

    1991-12-17

    This paper describes a rotary engine. It comprises: an engine block, the block defining an internal rotor cavity, a rotor, the rotor eccentrically positioned within the cavity, the block defining a combustion chamber, the combustion chamber positioned exteriorly of the rotor cavity and in fluid communication therewith, a pair of pistons, the pistons affixed to each other and slidably mounted within the rotor, an air inlet valve, the inlet valve positioned at one side of the combustion chamber, a dual acting outlet valve, the outlet valve comprising a top and a bottom rest, the outlet valve positioned at the other side of the combustion chamber, the combustion chamber defining both an outlet valve ceiling port and an outlet valve floor port, means to ignite fuel, the fuel ignition means located within the combustion chamber between the inlet and outlet valves, the block defining an exhaust port, the exhaust port spaced circumferentially from the combustion chamber and in fluid communication with the rotor cavity, the block defining an inlet port, and the inlet port circumfrentially spaced from the outlet port and in fluid communication with the rotor cavity.

  10. Rotary vee engine

    SciTech Connect (OSTI)

    Sullivan, R.W.; Holder, T.J.; Buchanan, M.F.

    1991-07-09

    This patent describes a rotary vee engine. It comprises a housing having outer ends; two cylinder blocks each having inner and outer ends and mounted in the housing for rotation of one cylinder block about a first rotational axis and rotation of the other cylinder block about a second rotational axis, the axes being angled to intersect adjacent the inner ends of the blocks at an included angle less than one hundred and eighty degrees; each cylinder bloc having cylinders positioned at a selected radial distance from the respective rotational axis and extending parallel to the axis to intersect the inner end of the cylinder block; angled pistons each having a portion disposed in a cylinder of one block and a portion disposed in a cylinder in the other block for orbital motion of the pistons coordinately with the rotation of the cylinder blocks; angled support shaft means for rotatably and axially supporting each of the cylinder blocks in the housing; an improved air/fuel system for directing pressurized charges of air/fuel mixture radially inwardly into each of the cylinders during the operation of the engine comprising; a central cavity formed by the housing between the inner ends of the cylinder blocks for receiving air/fuel mixture.

  11. Rotary reciprical combustion engines

    SciTech Connect (OSTI)

    Blount, D.H.

    1992-10-20

    This patent describes a rotary-reciprocal combustion engine having a cycle which includes the four strokes of intake, compression, expansion and exhaustion, the engine. It comprises: a housing formed with a peripheral wall with side walls, a rotor in the housing, the inner surface of the peripheral inner wall being cylindrical; a shaft; mounted in the center of the housing, passing through the rotor's hub and extending through the side walls of the housing, the hub having means to allow the rotor to reciprocate on the shaft while the shaft is rotating with the rotor; a reciprocal and rotary guide having means to guide the rotary and reciprocal motions of the rotor while keeping the rotor's piston in continuous sealing contact with the cylinder chamber walls and varying the volume of the cylinder chambers enabling a compression of a gaseous mixture to take place after aspirating a gaseous mixture; an ignition system having means for igniting compressed gaseous mixture and expansion of the cylinder chambers due to pressure of the combustion products.

  12. Supervisory Electrical Engineer- Supervisory Power System Real Time Electrical Engineer

    Broader source: Energy.gov [DOE]

    (See Frequently Asked Questions for more information). Where would I be working? Western Area Power Administration Rocky Mountain Region Power System Operations Operations Engineering, (J4200) 5555...

  13. Engineering Multimetallic FePt-based nanowires for enhancing oxygen

    Office of Scientific and Technical Information (OSTI)

    reduction and methanol oxidation reactions (Conference) | SciTech Connect and methanol oxidation reactions Citation Details In-Document Search Title: Engineering Multimetallic FePt-based nanowires for enhancing oxygen reduction and methanol oxidation reactions × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize

  14. Engineering Multimetallic FePt-based nanowires for enhancing oxygen

    Office of Scientific and Technical Information (OSTI)

    reduction reaction and methanol oxidation reaction (Conference) | SciTech Connect reaction and methanol oxidation reaction Citation Details In-Document Search Title: Engineering Multimetallic FePt-based nanowires for enhancing oxygen reduction reaction and methanol oxidation reaction × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service.

  15. Mr. Anthony Reale Engineering Department Lutheran Medical Center

    Office of Legacy Management (LM)

    Anthony Reale Engineering Department Lutheran Medical Center 1550 55th Street Brooklyn, NY 11220 Dear Mr. Reale: The site of the Lutheran Medical Center was formerly used by the American Machine and Foundry Company (AMF) to provide various serviceslto the 111 Department of Energy's predecessor agency, the U.S. The services included the machining and shaping of two uranium and thorium. At the request of the Department with the consent of the Lutheran Medical Center, Oak Ridge Associated

  16. General Engineer- Senior Technical Advisor

    Broader source: Energy.gov [DOE]

    **This is an Excepted Service position. This appointment will not confer Competitive Service career-conditional or career tenure status. This means that if you are selected, you would have to...

  17. Outboard motor provided with a four-stroke engine

    SciTech Connect (OSTI)

    Sumigawa, Y.

    1986-09-16

    This patent describes a lubricating system for an internal combustion engine having a lubricant reservoir adapted to contain a lubricant for the engine. The system includes an inlet line depending into the lubricant reservoir for supplying lubricant for an engine lubricating system, a strainer disposed at the inlet end of the inlet line for removing foreign particles from the lubricant entering the inlet line, a drain opening in the lubricant reservoir for draining lubricant therefrom, and a drain plug for closing the drain opening, the improvement is described comprising the drain opening and the strainer being sized and related for servicing of the strainer through the drain opening, and relief valve means for bypassing the strainer in providing unfiltered lubricant to the inlet line in the event the strainer becomes plugged.

  18. Intrinsically irreversible thermoacoustic heat engine

    SciTech Connect (OSTI)

    Wheatley, J.; Hofler, T.; Swift, G.W.; Migliori, A.

    1983-07-01

    Certain thermoacoustic effects are described which form the basis for a heat engine that is intrinsically irreversible in the sense that it requires thermal lags for its operation. After discussing several acoustical heating and cooling effects, including the behavior of a new structure called a ''thermoacoustic couple,'' we discuss structures that can be placed in acoustically resonant tubes to produce both substantial heat pumping effects and, for restricted heat inputs, large temperature differences. The results are analyzed quantitatively using a second-order thermoacoustic theory based on the work of Rott. The qualities of the acoustic engine are generalized to describe a class of intrinsically irreversible heat engines of which the present acoustic engine is a special case. Finally the results of analysis of several idealized intrinsically irreversible engines are presented. These suggest that the efficiency of such engines may be determined primarily by geometry or configuration rather than by temperature.

  19. Pressurized-fluid-operated engine

    SciTech Connect (OSTI)

    Holleyman, J.E.

    1990-01-30

    This patent describes a pressurized-fluid-operated reciprocating engine for providing output power by use of a pressurized gas that expands within the engine without combustion. It comprises: an engine block having a plurality of cylinders within which respective pistons are reciprocatable to provide a rotary power output; gas inlet means connected with the engine block for introducing a pressurized gas into the respective cylinders in a predetermined, timed relationship to provide a smooth power output from the engine; gas outlet means connected with the engine block for conveying exhaust gas from the respective cylinders after the gas expanded to move the pistons within the cylinders; and recirculation means extending between the inlet means and the outlet means for recirculation a predetermined quantity of exhaust gas. The recirculation means including ejector means for drawing exhaust gas into the recirculation means.

  20. Mechanical Engineering Department Technical Review

    SciTech Connect (OSTI)

    Carr, R.B.; Denney, R.M.

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  1. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1992-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  2. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1994-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  3. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1993-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  4. Engineering | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering Subscribe to RSS - Engineering This function manages the design, fabrication and operation of PPPL experimental devices, and oversees the Laboratory's facilities and its electrical and infrastructure systems. PPPL engineers design and build state-of-the-art controller for AC to DC converter that manages plasma in upgraded fusion machine The electric current that powers fusion experiments requires superb control. Without it, the magnetic coils the current drives cannot contain and

  5. Facility Engineering | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facility Engineering Facility Engineering Facility Engineering (FE) programmatic element efforts within EM encompasses real property asset management across the EM complex as well as the transfers of real property to Community Reuse Organizations and other entities for asset revitalization and/or economic development. In addition, FE coordinates, analyzes, and concurs on EM site submission for infrastructure reporting, such as, in the Integrated Facilities and Infrastructure crosscut and the

  6. Method of servicing wellbores

    SciTech Connect (OSTI)

    Pasztor, A.J.; Stauffer, R.C.

    1981-12-08

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  7. Method of servicing wellbores

    SciTech Connect (OSTI)

    Stauffer, R. C.; Pasztor, A. J.

    1984-12-25

    The servicing of wellbores with a high density fluid to maintain an elevated pressure on a portion of the formation penetrated by the well is improved. The improvement comprises injecting as the high density fluid a substantially solids-free aqueous solution of calcium bromide and zinc bromide having a density of at least about 15 pounds per gallon. The aqueous solution is prepared by reacting hydrogen bromide with zinc or compounds of zinc in the presence of an aqueous calcium bromide solution.

  8. Resonator coiling in thermoacoustic engines

    SciTech Connect (OSTI)

    Olson, J.R.; Swift, G.W.

    1995-11-01

    Coiling the resonator of a thermoacoustic engine is one way to try to minimize the engine`s size. However, flow in bent pipes is known to alter the fluid flow pattern because of centrifugal forces. Theory and measurements will be presented on the energy dissipation caused by oscillating flow in curved pipes. Measurements have been taken using free oscillations of liquids in U-tubes, and using a thermoacoustic engine with straight and bent resonators. [Work supported by the TTI program of the US Department of Energy, and by the Tektronix Corporation.

  9. Dish Engine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concentrating Solar Power » Dish Engine Dish Engine CSP dish engines, which provide high solar concentration and are in use globally, currently hold the world record for solar-to-electric system efficiency at 31.4%. The SunShot Initiative funds (R&D) on dish/engine systems and related aspects within the industry, national laboratories and universities to meet the SunShot goals. An extensive set of core capabilities at the national laboratories support the R&D endeavors. Industry Awards

  10. Sandia Energy - Automotive HCCI Engine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    because of its potential to rival the high efficiency of diesel engines while keeping NOx and particulate emissions extremely low. However, researchers must overcome several...

  11. Mission | APS Engineering Support Division

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    mission, the APS Engineering Support Division provides: Highly reliable, state-of-the-art computer infrastructure to meet the needs of the APS. Leading-edge information...

  12. Discover E for budding engineers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with National Engineers Week and is free with no registration required. Boy and Girl Scouts can even use the activities to help earn merit badges. Last year's event...

  13. engineer | OpenEI Community

    Open Energy Info (EERE)

    ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer...

  14. Aztech Engineers | Open Energy Information

    Open Energy Info (EERE)

    Connecticut Zip: 6120 Product: Connecticut-based consulting engineers specializing in HVAC, Plumbing, Fire-Protection, Electrical, and Geo-Thermal Well Systems. Coordinates:...

  15. SC e-journals, Engineering

    Office of Scientific and Technical Information (OSTI)

    ... and Design Geotechnical & Geological Engineering Heat Transfer - Asian Research IEEEACM Transactions on Networking (TON) IETE Journal of Research - OAJ IETE Technical ...

  16. Systems Engineer | Department of Energy

    Energy Savers [EERE]

    disruptions in oil supplies. Organizational Structure: This position is located in the Office of the Assistant Project Manager for Systems & Projects, Systems Engineering and...

  17. Engineering | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    in the engineering sciences field which are needed to ensure the safety, security, reliability and performance of the current and future U.S. nuclear weapons stockpile. ...

  18. RESEARCH PERSONNEL AND ENGINEERING STAFF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mechanical Engineer Postdoctoral Research Associates Bijay Agrawal - To 122304 Narayana P. Appathurai - To 93004 Lie-Wen Chen - To 9104 Vicenzo Greco Marian Jandel Seweryn...

  19. United States Forest Service - Forest Service NEPA Procedures...

    Open Energy Info (EERE)

    and Guidance Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: United States Forest Service - Forest Service NEPA Procedures and Guidance Abstract This...

  20. Quick release engine cylinder

    DOE Patents [OSTI]

    Sunnarborg, Duane A.

    2000-01-01

    A quick release engine cylinder allows optical access to an essentially unaltered combustion chamber, is suitable for use with actual combustion processes, and is amenable to rapid and repeated disassembly and cleaning. A cylinder member, adapted to constrain a piston to a defined path through the cylinder member, sealingly engages a cylinder head to provide a production-like combustion chamber. A support member mounts with the cylinder member. The support-to-cylinder mounting allows two relationships therebetween. In the first mounting relationship, the support engages the cylinder member and restrains the cylinder against the head. In the second mounting relationship, the cylinder member can pass through the support member, moving away from the head and providing access to the piston-top and head.

  1. Internal combustion rotary engine

    SciTech Connect (OSTI)

    Chen, S.P.

    1993-08-24

    An internal combustion rotary engine is described comprising: an internal combustion chamber wherein a combustible fuel-air mixture is ignited for producing a driving gas flow; a central rotor having an outer surface in which at least one group of curved channels circumferentially-and-axially extending without radially extending through the central rotor; and at least one annular rotor each enclosing the central rotor having an inner surface in which a corresponding number of curved channels circumferentially-and-axially extending without radially extending through the annular rotor; when the curved channels in the central rotor communicate with the curved channels in the annular rotor, the driving gas flow circumferentially-and-axially passing between the outer surface of the central rotor and the inner surface of the annular rotor for rotating the central rotor and the annular rotor in opposite directions.

  2. Engine Cylinder Temperature Control

    DOE Patents [OSTI]

    Kilkenny, Jonathan Patrick (Peoria, IL); Duffy, Kevin Patrick (Metamora, IL)

    2005-09-27

    A method and apparatus for controlling a temperature in a combustion cylinder in an internal combustion engine. The cylinder is fluidly connected to an intake manifold and an exhaust manifold. The method and apparatus includes increasing a back pressure associated with the exhaust manifold to a level sufficient to maintain a desired quantity of residual exhaust gas in the cylinder, and varying operation of an intake valve located between the intake manifold and the cylinder to an open duration sufficient to maintain a desired quantity of fresh air from the intake manifold to the cylinder, wherein controlling the quantities of residual exhaust gas and fresh air are performed to maintain the temperature in the cylinder at a desired level.

  3. Concentrating Solar Power Services CSP Services | Open Energy...

    Open Energy Info (EERE)

    providing consulting, due diligence and component testing for Solar Thermal Electricity Generation (STEG). References: Concentrating Solar Power Services (CSP...

  4. IPv6 Implementation at a Network Service Provider

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IPv6 Implementation at a Network Service Provider 2010 Inter Agency IPv6 Information Exchange August 4, 2010 R. Kevin Oberman Sr. Network Engineer Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Who Are We? ESnet is the network provider for the Department of Energy's Office of Science * ESnet is a networking pioneer with nearly a quarter century of networking * Began as MFEnet in 1976 * Became ESnet with broader mission in 1986 * Started support of BGP4 and

  5. Career Map: Quality Engineer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Engineer Career Map: Quality Engineer A male quality engineer sits at a desk with several computers showing data. Quality Engineer Position Title Quality Engineer Alternate Title(s) Quality Assurance, Quality Control Education & Training Level Advanced, Bachelors required, prefer graduate degree or equivalent experience Education & Training Level Description Quality engineers need a bachelor's degree in an engineering field, plus experience. Professional certifications may be

  6. Engineer, Sandia National Laboratories | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration Clifford Ho Engineer, Sandia National Laboratories Clifford Ho Clifford Ho Role: Engineer, Sandia National Laboratories Award: Asian American Engineer of the Year Profile: Clifford Ho, a Sandia engineer, has been selected by the Chinese Institute of Engineers - USA to receive the Asian American Engineer of the Year Award. The honor is presented each year to the nation's most outstanding Asian American engineers and scientists who make significant, lasting and global

  7. Power Services Site Navigation Menus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links for that menu. This page can be accessed via keyboard from other pages on the Power Services web site (access key N). Menu Names: About Power Services | News & Events |...

  8. Copy Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Copy Services Copy Services The Copier Management Team is here to make sure your copier needs are met. Our products and services include: Acquisition of New and Replacement Copiers Copier Maintenance/Repairs Copier Relocation Monthly Working Capital Fund Billing Reports Copier supplies Other services include needs assessment analysis to determine workload and most appropriate equipment to: Perform acquisition activities on behalf of program customers. Negotiation of equipment trade-in allowance

  9. Employee Services | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Employee Services The Office of Management provides many of the services that keep the Department of Energy Headquarters offices operational. These services keep the Department's facilities operating, as well as many of the managerial support functions that are shared by many of the Program Offices. These functions are primarily provided by the Office of Administration, MA-40. For a listing of office contacts please use the About Us menu, the Contact Us section, available directly

  10. FY09 Engineering Research & Technology Report (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Technical Report: FY09 Engineering Research & Technology Report Citation Details In-Document Search Title: FY09 Engineering Research & Technology Report × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this

  11. Secretary Salazar and Secretary Chu to Meet with Scientists and Engineers

    Energy Savers [EERE]

    at BP Houston Command Center | Department of Energy Salazar and Secretary Chu to Meet with Scientists and Engineers at BP Houston Command Center Secretary Salazar and Secretary Chu to Meet with Scientists and Engineers at BP Houston Command Center May 11, 2010 - 12:00am Addthis Report oiled shoreline or request volunteer information: (866)-448-5816 Submit alternative response technology, services or products: (281) 366-551 Submit your vessel for the Vessel of Opportunity Program: (281)

  12. I Mr. Sam Popowcer, PE Senior Project Manager BCM Engineers, Inc.

    Office of Legacy Management (LM)

    wrgv %%A% Washington, DC 20585 WY, 0 I Mr. Sam Popowcer, PE Senior Project Manager BCM Engineers, Inc. 1 Plymouth Meeting Mall Plymouth Meeting, Pennsylvania 19462 Dear Mr. Popowcer: This is a follow-up letter to our telephone conversation of July 24, 1991. Your company is providing research services to the U.S. Army Corps of Engineers for the Department of Defense former site restoration program. You requested information from the Department of Energy (DOE) concerning the Ashland Site in

  13. Stirling engine with pressurized crankcase

    DOE Patents [OSTI]

    Corey, John A. (Melrose, NY)

    1988-01-01

    A two piston Stirling engine wherein the pistons are coupled to a common crankshaft via bearing means, the pistons include pad means to minimize friction between the pistons and the cylinders during reciprocation of the pistons, means for pressurizing the engine crankcase, and means for cooling the crankshaft and the bearing means eliminating the need for oil in the crankcase.

  14. Rotary valve internal combustion engine

    SciTech Connect (OSTI)

    Bunk, P.H.

    1989-03-28

    A rotary valve internal combustion engine is described, comprising: an engine block; at least one cylinder in the engine block; at least one cylinder having a top end; cylinder head means located adjacent the top end of at least one cylinder, the cylinder head means having a cylindrically shaped cavity therein, the cylindrically shaped cavity being oriented in perpendicular relation to at least one cylinder; a piston sealingly mounted in at least one cylinder for reciprocable movement therein, the reciprocable movement including an intake stroke and an exhaust stroke; engine shaft means rotatably mounted to the engine block; means within the engine block for converting the reciprocable movement of the piston into rotary motion of the engine shaft means; a cylinder port located at the top end of at least one cylinder; a rotary valve rotatably mounted in the cylindrically shaped cavity; means connected with the engine shaft means for rotating the rotary valve in a predetermined synchronization with the reciprocable movement of the piston; aspiration means in the rotary valve for selectively aspirating at least one cylinder during the intake an exhaust strokes; and a spark plug removably mounted within the rotary valve and rotatable therewith.

  15. Project Funding Catalog of Services

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Funding Catalog of Services The U.S. Department of Energy Federal Energy Management Program February 2015 Project Funding Catalog of Services Contacts Contacts Patrick Shipp FEMP 1000 Independence Ave SW Washington, DC 20585 E-mail: patrick.shipp@ee.doe.gov Project Funding Catalog of Services Table of Contents Contents Contents ........................................................................................................................................................ i

  16. Stirling Engines and Irrigation Pumping

    SciTech Connect (OSTI)

    West, C.D.

    1987-01-01

    This report was prepared in support of the Renewable Energy Applications and Training Project that is sponsored by the U.S. Agency for International Development for which ORNL provides technical assistance. It briefly outlines the performance that might be achievable from various kinds of Stirling-engine-driven irrigation pumps. Some emphasis is placed on the very simple liquid-piston engines that have been the subject of research in recent years and are suitable for manufacture in less well-developed countries. In addition to the results quoted here (possible limits on M4 and pumping head for different-size engines and various operating conditions), the method of calculation is described in sufficient detail for engineers to apply the techniques to other Stirling engine designs for comparison.

  17. HCCI Engine Optimization and Control

    SciTech Connect (OSTI)

    Rolf D. Reitz

    2005-09-30

    The goal of this project was to develop methods to optimize and control Homogeneous-Charge Compression Ignition (HCCI) engines, with emphasis on diesel-fueled engines. HCCI offers the potential of nearly eliminating IC engine NOx and particulate emissions at reduced cost over Compression Ignition Direct Injection engines (CIDI) by controlling pollutant emissions in-cylinder. The project was initiated in January, 2002, and the present report is the final report for work conducted on the project through December 31, 2004. Periodic progress has also been reported at bi-annual working group meetings held at USCAR, Detroit, MI, and at the Sandia National Laboratories. Copies of these presentation materials are available on CD-ROM, as distributed by the Sandia National Labs. In addition, progress has been documented in DOE Advanced Combustion Engine R&D Annual Progress Reports for FY 2002, 2003 and 2004. These reports are included as the Appendices in this Final report.

  18. Engine combustion and flow diagnostics

    SciTech Connect (OSTI)

    1995-12-31

    This informative publication discusses the application of diagnostic techniques to internal combustion engines. The papers included fall into three broad categories: flow diagnostics, combustion diagnostics, and fuel spray diagnostics. Contents include: controlling combustion in a spark ignition engine by quantitative fuel distribution; a model for converting SI engine flame arrival signals into flame contours; in-cylinder diesel flame imaging compared with numerical computations; ignition and early soot formation in a DI diesel engine using multiple 2-D imaging diagnostics; investigation of diesel sprays using diffraction-based droplet sizing; fuel distribution effects on the combustion of a direct-injection stratified-charge engine; and 2-D measurements of the liquid phase temperature in fuel sprays.

  19. Data ID Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ID Service First DOI for a DOE dataset was minted by OSTI and registered with DataCite on 8/10/2011 from the DOE Atmospheric Radiation Measurement (ARM) Climate Research Facility at Oak Ridge National Laboratory http://dx.doi.org/10.5439/1021460 Disseminate Our Results: "Our success should be measured not when a project is completed or an experiment concluded, but when scientifc and technical information is disseminated. Beyond broad availability of technical reports, e-prints and

  20. Engineering Cellulases for Biorefinery

    SciTech Connect (OSTI)

    Manoj Kumar, PhD

    2010-06-27

    Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

  1. Axial flow rotary engine

    SciTech Connect (OSTI)

    Loran, W.; Robinson, M.A.

    1989-07-18

    This paper describes an internal combustion engine. It comprises: a housing having an intake port at one end thereof and an exhaust port at the other end thereof; a compression chamber in the housing near the one end; compressor means in the compression chamber; a compressor transfer port opening through the downstream outlet wall; an expansion chamber in the housing near the other end thereof to receive combusted gases; work means in the expansion chamber driven by expanding, combusted gases; means rotating the compressor outlet wall at the same rotational drive speed as the expander inlet wall; an expansion chamber inlet port opening extending through the upstream inlet wall; a cylindrical combustion chamber block rotatable in the housing intermediate the compression chamber and the expansion chamber; at least two combustion chambers in the block; means rotating the block at a reduced speed relative to the speed of rotation of the compressor outlet wall and the expander inlet wall; means for igniting the charge of compressed gas during the intermediate portion of each revolution of the combustion chamber block. The combustion chambers being substantially hemispherical; the speed of rotation of the compressor outlet wall is in the same ratio to the speed of rotation of the combustion chamber block as the number of combustion chambers in the block is to the number of combustion chambers less one.

  2. Subterranean stress engineering experiments

    SciTech Connect (OSTI)

    Campbell, J.R.; Colgate, S.A.; Wheat, B.M.

    1980-01-01

    The state of stress in a subterranean rock mass has classically been assumed to be constant at best. In soil with a high clay content, preconsolidation and drainage methods can lead to more stable foundation material, but methods for engineering the stresses in large masses of rock are not well known. This paper shows the results from an experiment designed to alter the in situ rock stress field in an oil shale mine. This was done by hydrofracturing the rock by use of a packed-well injection system and then propping the crack open with a thixotropic gel, which slowly hardened to the consistency of cement. Successive hydrofracture and high-pressure grouting resulted in an overstressed region. Well-head injection pressures, surface tilts, injection rates, and subterranean strains were measured and recorded on floppy disk by a Z-80 microprocessor. The results were then transmitted to the large computer system at the Los Alamos Scientific Laboratory (LASL). To put the data in a more useful form, computer-generated movies of the tilts and strains were made by use of computer graphics developed at LASL. The purpose of this paper is to present results from the Single Large Instrumented Test conducted in the Colony Oil Shale Mine near Rifle, Colorado. 13 figures.

  3. Acoustic cooling engine

    DOE Patents [OSTI]

    Hofler, Thomas J. (Los Alamos, NM); Wheatley, John C. (Los Alamos, NM); Swift, Gregory W. (Santa Fe, NM); Migliori, Albert (Santa Fe, NM)

    1988-01-01

    An acoustic cooling engine with improved thermal performance and reduced internal losses comprises a compressible fluid contained in a resonant pressure vessel. The fluid has a substantial thermal expansion coefficient and is capable of supporting an acoustic standing wave. A thermodynamic element has first and second ends and is located in the resonant pressure vessel in thermal communication with the fluid. The thermal response of the thermodynamic element to the acoustic standing wave pumps heat from the second end to the first end. The thermodynamic element permits substantial flow of the fluid through the thermodynamic element. An acoustic driver cyclically drives the fluid with an acoustic standing wave. The driver is at a location of maximum acoustic impedance in the resonant pressure vessel and proximate the first end of the thermodynamic element. A hot heat exchanger is adjacent to and in thermal communication with the first end of the thermodynamic element. The hot heat exchanger conducts heat from the first end to portions of the resonant pressure vessel proximate the hot heat exchanger. The hot heat exchanger permits substantial flow of the fluid through the hot heat exchanger. The resonant pressure vessel can include a housing less than one quarter wavelength in length coupled to a reservoir. The housing can include a reduced diameter portion communicating with the reservoir. The frequency of the acoustic driver can be continuously controlled so as to maintain resonance.

  4. Materials and Transportation Services | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials and Transportation Services General Information: Materials and Transportation Services provides Ames Laboratory employees with a wide array of services and support activities. Select a service listed below to learn more about contacts, schedules and regulatory information. Shipping and Receiving Hazardous Materials Transportation Storeroom Services Storeroom Catalog Mail Services Express Package Shipping Service Precious Metals Fleet Vehicles

  5. Optimization of Engine-out Emissions from a Diesel Engine to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine-out Emissions from a Diesel Engine to Meet Tier 2 Bin 5 Emission Limits Optimization of Engine-out Emissions from a Diesel Engine to Meet Tier 2 Bin 5 Emission Limits...

  6. Update on Service Management project

    ScienceCinema (OSTI)

    None

    2011-04-25

    GS and IT Service Management project status meeting -------------------------------------------------------------------------- Distribution: Sigurd Lettow, Frederic Hemmer, Thomas Pettersson, David Foster, Matti Tiirakari, GS&IT; Service Providers When and where: Thursday 2nd September at 10:00-11:30 in IFiltration Plant (222-R-001) Dear All, We would like to inform you about progress made on different topics like the Service Catalogue, the new Service Management Tool and the Service Desk. We would also like to present the plan for when we hope to "go live" and what this will mean for all of you running and providing services today. We will need your active support and help in the coming months to make this happen. GS&IT; Service Management Teams Reinoud Martens, Mats Moller

  7. Regenerative rotary displacer Stirling engine

    SciTech Connect (OSTI)

    Isshiki, Naotsugu; Watanabe, Hiroichi; Raggi, L.; Isshiki, Seita; Hirata, Koichi

    1996-12-31

    A few rotary displacer Stirling engines in which the displacer has one gas pocket space at one side and rotates in a main enclosed cylinder, which is heated from one side and cooled from opposite side without any regenerator, have been studied for some time by the authors. The authors tried to improve this engine by equipping it with a regenerator, because without a regenerator, pressure oscillation and efficiency are too small. Here, several types of regenerative rotary displacer piston Stirling engines are proposed. One is the contra-rotating tandem two disc type displacer engine using axial heat conduction through side walls or by heat pipes and another is a single disc type with circulating fluid regenerator or heat pipes. Stirling engines of this new rotary displacer type are thought to attain high speed. Here, experimental results of the original rotary displacer Stirling engine without a regenerator, and one contra-rotating tandem displacer engine with side wall regenerator by axial heat conduction are reported accompanied with a discussion of the results.

  8. Wankel engine for hybrid powertrain

    SciTech Connect (OSTI)

    Butti, A.; Site, V.D.

    1995-12-31

    The Wankel engine is suited to be used to drive hybrid propulsion systems. The main disadvantage of hybrid propulsion systems is the complexity that causes a high weight and large dimensions. For these reason hybrid systems are more suitable for large size vehicle (buses, vans) rather than for small passenger cars. A considerable reduction of hybrid systems weight and dimensions can be obtained using a Wankel rotary engine instead of a conventional engine. The Wankel engine is light, compact, simple, and produces low noise and low vibrations. Therefore a Wankel engine powered hybrid system is suited to be used on small cars. In this paper a 1,000 kg parallel hybrid car with continuously variable transmission and a 6,000 kg series hybrid minibus both equipped with Wankel engines are considered. The Wankel engine works at steady state to minimize fuel consumption and exhaust emissions. The simulation of the behavior of these two vehicles during a ECE + EUDC test cycle is presented in order to evaluate the performances of the systems.

  9. The Rhythm Engineers | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Rhythm Engineers The Rhythm Engineers The Rhythm Engineers entertain in front of a drawing of Jackson Square

  10. Enabling High Efficiency Ethanol Engines

    SciTech Connect (OSTI)

    Szybist, J.; Confer, K.

    2011-03-01

    Delphi Automotive Systems and ORNL established this CRADA to explore the potential to improve the energy efficiency of spark-ignited engines operating on ethanol-gasoline blends. By taking advantage of the fuel properties of ethanol, such as high compression ratio and high latent heat of vaporization, it is possible to increase efficiency with ethanol blends. Increasing the efficiency with ethanol-containing blends aims to remove a market barrier of reduced fuel economy with E85 fuel blends, which is currently about 30% lower than with petroleum-derived gasoline. The same or higher engine efficiency is achieved with E85, and the reduction in fuel economy is due to the lower energy density of E85. By making ethanol-blends more efficient, the fuel economy gap between gasoline and E85 can be reduced. In the partnership between Delphi and ORNL, each organization brought a unique and complementary set of skills to the project. Delphi has extensive knowledge and experience in powertrain components and subsystems as well as overcoming real-world implementation barriers. ORNL has extensive knowledge and expertise in non-traditional fuels and improving engine system efficiency for the next generation of internal combustion engines. Partnering to combine these knowledge bases was essential towards making progress to reducing the fuel economy gap between gasoline and E85. ORNL and Delphi maintained strong collaboration throughout the project. Meetings were held regularly, usually on a bi-weekly basis, with additional reports, presentations, and meetings as necessary to maintain progress. Delphi provided substantial hardware support to the project by providing components for the single-cylinder engine experiments, engineering support for hardware modifications, guidance for operational strategies on engine research, and hardware support by providing a flexible multi-cylinder engine to be used for optimizing engine efficiency with ethanol-containing fuels.

  11. Fish and Wildlife Service | Open Energy Information

    Open Energy Info (EERE)

    Wildlife Service Jump to: navigation, search Logo: Fish and Wildlife Service Name: Fish and Wildlife Service Place: Washington, DC Year Founded: 1940 Phone Number: (303) 275-2370...

  12. International Nuclear Services Ltd | Open Energy Information

    Open Energy Info (EERE)

    Nuclear Services Ltd Jump to: navigation, search Name: International Nuclear Services Ltd Place: Cheshire, England, United Kingdom Zip: WA3 6AS Sector: Services Product:...

  13. Enforcement Letter, Skookum Contract Services | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Skookum Contract Services Enforcement Letter, Skookum Contract Services June 12, 2015 Worker Safety and Health Enforcement Letter issued to Skookum Contract Services On June 12, ...

  14. Energy Efficiency Services Ltd | Open Energy Information

    Open Energy Info (EERE)

    Services Ltd Jump to: navigation, search Name: Energy Efficiency Services Ltd Place: Delhi (NCT), India Sector: Efficiency, Services Product: Delhi-based joint venture formed to...

  15. Tiger Energy Services Inc | Open Energy Information

    Open Energy Info (EERE)

    Services Inc Jump to: navigation, search Name: Tiger Energy Services Inc. Place: Signal Hill, California Zip: 90755 Sector: Geothermal energy, Services Product: US-based...

  16. Williams Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Energy Services Jump to: navigation, search Name: Williams Energy Services Place: Tulsa, OK Website: www.williamsenergyservices.com References: Williams Energy Services1...

  17. National Park Service | Open Energy Information

    Open Energy Info (EERE)

    Service Jump to: navigation, search Logo: National Park Service Name: National Park Service Address: 1849 C Street NW Place: Washington, District of Columbia Zip: 20240 Year...

  18. Hermes Energy Services | Open Energy Information

    Open Energy Info (EERE)

    Hermes Energy Services Jump to: navigation, search Name: Hermes Energy Services Place: Dursley, United Kingdom Sector: Services Year Founded: 2007 Website: www.hermesenergyservices...

  19. About Power Services (pbl/main)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Power Services Power Home Page Other Related Web Sites Power Services Organization Power Services Financial Information Tribal Affairs Office Account Executives Customer...

  20. Property:Test Services | Open Energy Information

    Open Energy Info (EERE)

    Test Services Jump to: navigation, search Property Name Test Services Property Type String Pages using the property "Test Services" Showing 25 pages using this property. (previous...