Powered by Deep Web Technologies
Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Industrial Wireless Sensors: A User's Perspective on the Impact of Standards on Wide-spread Deployment  

Science Conference Proceedings (OSTI)

The role of wireless sensing technologies in industrial instrumentation will undoubtedly become more important in the years ahead. . Deployment of such instrumentation in an industrial setting with its heightened security and robustness criteria hinges on user acceptance of verified performance as well as meeting cost requirements. Today, industrial users face many choices when specifying a wireless sensor network, including radio performance, battery life, interoperability, security, and standards compliance. The potential market for industrial wireless sensors is literally millions of wireless instruments and it is imperative that accurate information for applying the technology to real-world applications be available to the end-user so that they can make informed deployment decisions. The majority of industrial wireless automation designs now being deployed or being considered for deployment are based on three different standards . The HART Communications Foundation s WirelessHART (IEC 62591), the International Society of Automation s ISA100.11a, and the offering from the Industrial Wireless Alliance of China known as WIA-PA (IEC 62601). Aside from these industrial automation standards, users must also be cognizant of the underlying wireless network standards IEEE 802.11, IEEE 802.15.4, and IEEE 802.15.3a and their interactions with the three principal industrial automation protocols mentioned previously. The crucial questions being asked by end users revolve around sensor network performance, interoperability, reliability, and security. This paper will discuss potential wireless sensor applications in power plants, barriers to the acceptance of wireless technology, concerns related to standards, and provide an end user prospective on the issues affecting wide-spread deployment of wireless sensors. Finally, the authors conclude with a discussion of a recommended path forward including how standards organizations can better facilitate end user decision making and how end users can locate and use objective information for decision making.

Taft, Cyrus W. [Taft Engineering, Inc.; Manges, Wayne W [ORNL; Sorge, John N [Southern Company Services, Inc.

2012-01-01T23:59:59.000Z

2

Challenges for Widespread Renewables Deployment  

U.S. Energy Information Administration (EIA)

Biogas Geothermal Solar Biomass Biomass (Co-Fired) Wind 2009 Electric Power Research Institute, Inc. All rights reserved. 9 Key Issues for Further Study ...

3

Cost Effective Single Crystals  

Science Conference Proceedings (OSTI)

three relevant technologies, namely casting, alloy development and orientation measurement, developed by Rolls-Royce to enable the cost effective production.

4

Cost effective multimedia courseware development  

Science Conference Proceedings (OSTI)

Multimedia technology offers considerable potential for education though the costs of production of courseware are prohibitive especially in a rapidly changing discipline such as computer science. This paper proposes a cost-effective technique which ...

C. J. Pilgrim; Y. K. Leung; D. D. Grant

1997-06-01T23:59:59.000Z

5

Technology Deployment List | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment » Technology Deployment List Deployment » Technology Deployment List Technology Deployment List October 8, 2013 - 2:44pm Addthis Technology Ranking Criteria Technologies featured in the Technology Deployment List were ranked by: Federal Impact: Combination of energy savings potential and applicability in the Federal market (50% weighting) Cost Effectiveness: Relative cost of the implementation and average expected return typically reported in case studies as simple payback period (30% weighting) Probability of Success: Combination of the qualitative characteristics scored separately and averaged to determine probability of success. Criteria include strength of supply chain, knowledge base, implementation difficulty, and customer acceptance (20% weighting). The Federal Energy Management Program's (FEMP) Technology Deployment List

6

Cost-Effectiveness of Two Different Techniques  

Science Conference Proceedings (OSTI)

Embolization of the Internal Iliac Artery: Cost-Effectiveness of Two Different ... cost -effectiveness of coils versus the Amplatzer Vascular. Plug (AVP) for occlusion...

7

Cost effectiveness of sonic drilling  

SciTech Connect

Sonic drilling (combination of mechanical vibrations and rotary power) is an innovative environmental technology being developed in cooperation with DOE`s Arid-Site Volatile Organic Compounds Integrated Demonstration at Hanford and the Mixed Waste Landfill Integrated Demonstration at Sandia. This report studies the cost effectiveness of sonic drilling compared with cable-tool and mud rotary drilling. Benefit of sonic drilling is its ability to drill in all types of formations without introducing a circulating medium, thus producing little secondary waste at hazardous sites. Progress has been made in addressing the early problems of failures and downtime.

Masten, D.; Booth, S.R.

1996-03-01T23:59:59.000Z

8

Customer-Focused Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Customer-Focused Customer-Focused Deployment SAM RASHKIN Chief Architect Building Technologies Program February 29, 2012 Building America Meeting 2 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market Buildings.Energy.gov 'Good Government' As-A-System IECC Code: Mandates technologies and practices proven reliable and cost- effective ENERGY STAR: Recognizes Builders Who Deliver Significantly Above Code Performance Builders Challenge: Recognizes Leading Builders Applying Proven Innovations and Best Practices Building America: Develops New Innovations and Best Practices 3 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market Buildings.Energy.gov Disseminating Research Results: Building America Resource Tool 4 | INNOVATION & INTEGRATION: Transforming the Energy Efficiency Market

9

Deployable structures  

E-Print Network (OSTI)

This thesis has the purpose of describing the meaning and applications of deployable structures (making emphasis in the scissor-hinged and sliding mechanisms.) and the development of new geometries, details, and mechanisms ...

Hernndez Merchan, Carlos Henrique

1987-01-01T23:59:59.000Z

10

NREL: Technology Deployment - Deployment and Market Transformation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Search More Search Options Site Map Printable Version Deployment and Market Transformation Email Updates NREL's deployment and market transformation email updates...

11

Federal Energy Management Program: Technology Deployment List  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment List Deployment List Technology Ranking Criteria Technologies featured in the Technology Deployment List were ranked by: Federal Impact: Combination of energy savings potential and applicability in the Federal market (50% weighting) Cost Effectiveness: Relative cost of the implementation and average expected return typically reported in case studies as simple payback period (30% weighting) Probability of Success: Combination of the qualitative characteristics scored separately and averaged to determine probability of success. Criteria include strength of supply chain, knowledge base, implementation difficulty, and customer acceptance (20% weighting). The Federal Energy Management Program's (FEMP) Technology Deployment List features information about promising new and underutilized energy-saving technologies available for Federal and commercial building sector deployment. Common considerations and barriers are also outlined.

12

DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water...

13

Changing the Climate: Looking Towards a More Cost Effective,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future November...

14

Changing the Climate: Looking Towards a More Cost Effective,...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future, November 18, 2008 Changing the Climate: Looking Towards a More Cost Effective, Energy...

15

Identifying Cost-Effective Residential Energy Efficiency Opportunities...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative Identifying Cost-Effective Residential Energy Efficiency...

16

AMF Deployment, Manacapuru, Brazil  

NLE Websites -- All DOE Office Websites (Extended Search)

Manacapuru, Brazil Manacapuru Deployment AMF Home Manacapuru Home GOAMAZON Home Experiment Planning Abstract and Related Campaigns Science Plan (PDF, 1.4MB) Deployment Operations...

17

NREL: Technology Deployment - Integrated Deployment Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Model Integrated Deployment Model NREL's integrated deployment model provides a framework to focus on the national goal of accelerating market adoption of clean energy technologies through local efforts. With support from the U.S. Department of Energy (DOE), NREL developed and applies the integrated deployment model to select projects including disaster recovery, statewide activities, federal agency support, island activities, and community renewable energy deployment. How the Model Works To address the complex challenges of multi-technology, multi-stakeholder, and multi-fuel deployment, NREL created the integrated deployment model to support each technology area separately but also consider the integration points between the technologies. NREL also identifies the cross-cutting

18

Vehicle Technologies Office: Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: Deployment to someone by E-mail Share Vehicle Technologies Office: Deployment on Facebook Tweet about Vehicle Technologies Office: Deployment on Twitter Bookmark Vehicle Technologies Office: Deployment on Google Bookmark Vehicle Technologies Office: Deployment on Delicious Rank Vehicle Technologies Office: Deployment on Digg Find More places to share Vehicle Technologies Office: Deployment on AddThis.com... Energy Policy Act (EPAct) Clean Cities Educational Activities Deployment Our nation's energy security depends on the efficiency of our transportation system and on which fuels we use. Transportation in the United States already consumes much more oil than we produce here at home

19

On cost-effective communication network designing  

E-Print Network (OSTI)

How to efficiently design a communication network is a paramount task for network designing and engineering. It is, however, not a single objective optimization process as perceived by most previous researches, i.e., to maximize its transmission capacity, but a multi-objective optimization process, with lowering its cost to be another important objective. These two objectives are often contradictive in that optimizing one objective may deteriorate the other. After a deep investigation of the impact that network topology, node capability scheme and routing algorithm as well as their interplays have on the two objectives, this letter presents a systematic approach to achieve a cost-effective design by carefully choosing the three designing aspects. Only when routing algorithm and node capability scheme are elegantly chosen can BA-like scale-free networks have the potential of achieving good tradeoff between the two objectives. Random networks, on the other hand, have the built-in character for a cost-effective design, especially when other aspects cannot be determined beforehand.

Guoqiang Zhang

2009-10-12T23:59:59.000Z

20

Distribution network modeling and optimization for rapid and cost-effective deployment of oilfield drilling equipment  

E-Print Network (OSTI)

AAA, a large oil and gas field services company, is in the business of providing drilling services to companies that extract and market hydrocarbons. One of the key success factors in this industry is the ability to provide ...

Martchouk, Alexander

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Status of grid scale energy storage and strategies for accelerating cost effective deployment  

E-Print Network (OSTI)

The development of emerging grid scale energy storage technologies offers great potential to improve the architecture and operation of the electrical grid. This is especially important in the face of increased reliance on ...

Kluza, John Jerome

2009-01-01T23:59:59.000Z

22

Commissioning: A Highly Cost-Effective Building Energy Management Strategy  

E-Print Network (OSTI)

Commissioning: A Highly Cost-Effective Building Energypractice of building commissioning is a particularly potentefficiency. Although commissioning has earned increased

Mills, Evan

2012-01-01T23:59:59.000Z

23

QCD on GPUs: cost effective supercomputing  

E-Print Network (OSTI)

The exponential growth of floating point power in graphics processing units (GPUs), together with their low cost, has given rise to an attractive platform upon which to deploy lattice QCD calculations. GPUs are essentially many (O(100)) core chips, that are programmed using a massively threaded environment, and so are representative of the future of high performance computing (HPC). The large ratio of raw floating point operations per second to memory bandwidth that is characteristic of GPUs necessitates that unique algorithmic design choices are made to harness their full potential. We review the progress to date in using GPUs for large scale calculations, and contrast GPUs against more traditional HPC architectures

M. A. Clark

2009-12-11T23:59:59.000Z

24

Cost-Effective Solar Thermal Energy Storage: Thermal Energy Storage With Supercritical Fluids  

Science Conference Proceedings (OSTI)

Broad Funding Opportunity Announcement Project: UCLA and JPL are creating cost-effective storage systems for solar thermal energy using new materials and designs. A major drawback to the widespread use of solar thermal energy is its inability to cost-effectively supply electric power at night. State-of-the-art energy storage for solar thermal power plants uses molten salt to help store thermal energy. Molten salt systems can be expensive and complex, which is not attractive from a long-term investment standpoint. UCLA and JPL are developing a supercritical fluid-based thermal energy storage system, which would be much less expensive than molten-salt-based systems. The teams design also uses a smaller, modular, single-tank design that is more reliable and scalable for large-scale storage applications.

None

2011-02-01T23:59:59.000Z

25

Deployment Partnerships (Presentation)  

SciTech Connect

This presentation, Deployment Partnerships, was given by Mike Pacheco at the Industry Growth Forum in Golden, Colorado, November 5, 2009.

Pacheco, M.

2009-11-05T23:59:59.000Z

26

Los Alamos National Laboratory Tritium Technology Deployments Large Scale Demonstration and Deployment Project  

Science Conference Proceedings (OSTI)

This paper describes the organization, planning and initial implementation of a DOE OST program to deploy proven, cost effective technologies into D&D programs throughout the complex. The primary intent is to accelerate closure of the projects thereby saving considerable funds and at the same time being protective of worker health and the environment. Most of the technologies in the ''toolkit'' for this program have been demonstrated at a DOE site as part of a Large Scale Demonstration and Deployment Project (LSDDP). The Mound Tritium D&D LSDDP served as the base program for the technologies being deployed in this project but other LSDDP demonstrated technologies or ready-for-use commercial technologies will also be considered. The project team will evaluate needs provided by site D&D project managers, match technologies against those needs and rank deployments using a criteria listing. After selecting deployments the project will purchase the equipment and provide a deployment engineer to facilitate the technology implementation. Other cost associated with the use of the technology will be borne by the site including operating staff, safety and health reviews etc. A cost and performance report will be prepared following the deployment to document the results.

McFee, J.; Blauvelt, D.; Stallings, E.; Willms, S.

2002-02-26T23:59:59.000Z

27

Cost Effectiveness of Electricity Energy Efficiency Programs | Open Energy  

Open Energy Info (EERE)

Cost Effectiveness of Electricity Energy Efficiency Programs Cost Effectiveness of Electricity Energy Efficiency Programs Jump to: navigation, search Tool Summary Name: Cost Effectiveness of Electricity Energy Efficiency Programs Agency/Company /Organization: Resources for the Future Sector: Energy Focus Area: Energy Efficiency Topics: Finance Resource Type: Publications Website: www.rff.org/RFF/Documents/RFF-DP-09-48.pdf Cost Effectiveness of Electricity Energy Efficiency Programs Screenshot References: Cost Effectiveness of Electricity Energy Efficiency Programs[1] Abstract "We analyze the cost-effectiveness of electric utility rate payer-funded programs to promote demand-side management (DSM) and energy efficiency investments. We develop a conceptual model that relates demand growth rates to accumulated average DSM capital per customer and changes in energy

28

Accelerating Electric Vehicle Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment Accelerating Electric Vehicle Deployment More Documents &...

29

Sandia creates lifelike, cost-effective robotic hand that can...  

National Nuclear Security Administration (NNSA)

creates lifelike, cost-effective robotic hand that can disable IEDs | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering...

30

Technology Improvement Pathways to Cost-Effective Vehicle Electrification: Preprint  

DOE Green Energy (OSTI)

This paper evaluates several approaches aimed at making plug-in electric vehicles (EV) and plug-in hybrid electric vehicles (PHEVs) cost-effective.

Brooker, A.; Thornton, M.; Rugh, J.

2010-02-01T23:59:59.000Z

31

Estimate of Cost-Effective Potential for Minimum Efficiency Performanc...  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost-Effective Potential for Minimum Efficiency Performance Standards in 13 Major World Economies Energy Savings, Environmental and Financial Impacts Title Estimate of...

32

Implications of Cost Effectiveness Screening Practices in a Low...  

NLE Websites -- All DOE Office Websites (Extended Search)

Implications of Cost Effectiveness Screening Practices in a Low Natural Gas Price Environment: Case Study of a Midwestern Residential Energy Upgrade Program NOTICE Due to the...

33

Deployment of EVs in the Federal Fleet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electric Vehicles 101 Electric Vehicles 101 eere.energy.gov The Parker Ranch installation in Hawaii Deployment of EVs in the Federal Fleet FUPWG Rapid City, South Dakota October 20 th , 2010 Amanda Sahl Federal Energy Management Program 2 | Electric Vehicles 101 eere.energy.gov FEMP facilitates the Federal Government"s implementation of sound, cost-effective energy management and investment practices to enhance the nation"s energy security and environmental stewardship. 3 | Electric Vehicles 101 eere.energy.gov Agenda * Overview of the Federal Fleet * Infrastructure Requirements * Current implementation and activity * Ongoing barriers and questions 4 | Electric Vehicles 101 eere.energy.gov Federal Fleet Inventory

34

AMF Deployment, Shouxian, China  

NLE Websites -- All DOE Office Websites (Extended Search)

China Shouxian Deployment AMF Home Shouxian Home Data Plots and Baseline Instruments Experiment Planning Proposal Science Plan, (PDF, 1,257K) Outreach Fact Sheets English Version...

35

Energy Department Launches Public-Private Partnership to Deploy Hydrogen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Public-Private Partnership to Deploy Public-Private Partnership to Deploy Hydrogen Infrastructure Energy Department Launches Public-Private Partnership to Deploy Hydrogen Infrastructure May 13, 2013 - 1:37pm Addthis News Media Contact (202) 586-4940 WASHINGTON -- The Energy Department today launched H2USA -- a new public-private partnership focused on advancing hydrogen infrastructure to support more transportation energy options for U.S. consumers, including fuel cell electric vehicles (FCEVs). The new partnership brings together automakers, government agencies, gas suppliers, and the hydrogen and fuel cell industries to coordinate research and identify cost-effective solutions to deploy infrastructure that can deliver affordable, clean hydrogen fuel in the United States. "Fuel cell technologies are an important part of an all-of-the-above

36

Estimate Greenhouse Gas Reduction Potential and Cost-Effectiveness of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Greenhouse Gas Reduction Potential and Cost-Effectiveness Greenhouse Gas Reduction Potential and Cost-Effectiveness of Strategies for Vehicles and Mobile Equipment Estimate Greenhouse Gas Reduction Potential and Cost-Effectiveness of Strategies for Vehicles and Mobile Equipment October 7, 2013 - 11:58am Addthis YOU ARE HERE: Step 3 After identifying petroleum reduction strategies, a Federal agency should estimate the greenhouse gas (GHG) reduction potential and cost effectiveness of these strategies for vehicles and mobile equipment. The table below provides steps for identifying optimal vehicle acquisition strategies. Table 1. Framework for Identifying Optimal Vehicle Acquisition Strategies Step Summary Purpose PLAN and COLLECT 1 Determine vehicle acquisition requirements Establish a structured Vehicle Allocation Matrix (VAM) to determine the numbers and types of vehicles required to accomplish your fleet's mission

37

Changing the Climate: Looking Towards a More Cost Effective, Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future, November 18, 2008 Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future, November 18, 2008 A Department of Energy press release announcing that more than 60 energy, environmental and state policy leaders from across the country have come together to produce the updated "National Action Plan Vision for 2025: A Framework for Change." Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future, November 18, 2008 More Documents & Publications Secretary Chu Announces $620 Million for Smart Grid Demonstration and Energy Storage Projects: Recovery Act Funding Will Upgrade the Electrical Grid, Save Energy, and Create Jobs

38

The Cost-Effectiveness of Semi-Lagrangian Advection  

Science Conference Proceedings (OSTI)

The purpose of this paper is to ascertain the cost-effectiveness of semi-Lagrangian advection schemes for a wide variety of geophysical flows at all scales. The approach used is first to determine the minimum computational overhead associated ...

Peter Bartello; Stephen J. Thomas

1996-12-01T23:59:59.000Z

39

Finding Cost-Effective Opportunities for Energy Storage on the...  

NLE Websites -- All DOE Office Websites (Extended Search)

Finding Cost-Effective Opportunities for Energy Storage on the Electric Grid Speaker(s): Ben Kaun Date: January 17, 2014 - 12:00pm - 1:00pm Location: 90-3122 Seminar HostPoint of...

40

Cost-Effective Determination of Biomass from Aerial Images  

Science Conference Proceedings (OSTI)

This paper describes an ongoing collaborative research program between the Computer Science and the Forestry and Wildlife Management Departments at the University of Massachusetts to develop cost-effective methodologies for monitoring biomass and other ...

Howard J. Schultz; Dana Slaymaker; Chris Holmes; Frank Stolle; Allen R. Hanson; Edward M. Riseman; M. Delaney; M. Powell

1999-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Changing the Climate: Looking Towards a More Cost Effective, Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Changing the Climate: Looking Towards a More Cost Effective, Energy Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future July 20, 2011 - 2:04pm Addthis November 18, 2008 Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future WASHINGTON, DC - The U.S. Environmental Protection Agency and U.S. Department of Energy are helping states lead the way in an effort to promote low cost energy efficiency. More than 60 energy, environmental and state policy leaders from across the country have come together to produce the updated National Action Plan Vision for 2025: A Framework for Change. The action plan outlines strategies to help lower the growth in energy demand across the country by more than 50 percent, and shows ways to

42

NREL: Technology Deployment - Wind Energy Deployment and Market...  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Energy Deployment and Market Transformation NREL experts have a broad range of wind energy deployment and market transformation capabilities spanning more than 20 years of...

43

Emission control cost-effectiveness of alternative-fuel vehicles  

DOE Green Energy (OSTI)

Although various legislation and regulations have been adopted to promote the use of alternative-fuel vehicles for curbing urban air pollution problems, there is a lack of systematic comparisons of emission control cost-effectiveness among various alternative-fuel vehicle types. In this paper, life-cycle emission reductions and life-cycle costs were estimated for passenger cars fueled with methanol, ethanol, liquefied petroleum gas, compressed natural gas, and electricity. Vehicle emission estimates included both exhaust and evaporative emissions for air pollutants of hydrocarbon, carbon monoxide, nitrogen oxides, and air-toxic pollutants of benzene, formaldehyde, 1,3-butadiene, and acetaldehyde. Vehicle life-cycle cost estimates accounted for vehicle purchase prices, vehicle life, fuel costs, and vehicle maintenance costs. Emission control cost-effectiveness presented in dollars per ton of emission reduction was calculated for each alternative-fuel vehicle types from the estimated vehicle life-cycle emission reductions and costs. Among various alternative-fuel vehicle types, compressed natural gas vehicles are the most cost-effective vehicle type in controlling vehicle emissions. Dedicated methanol vehicles are the next most cost-effective vehicle type. The cost-effectiveness of electric vehicles depends on improvements in electric vehicle battery technology. With low-cost, high-performance batteries, electric vehicles are more cost-effective than methanol, ethanol, and liquified petroleum gas vehicles.

Wang, Q. [Argonne National Lab., IL (United States); Sperling, D.; Olmstead, J. [California Univ., Davis, CA (United States). Inst. of Transportation Studies

1993-06-14T23:59:59.000Z

44

Technology Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment Deployment Technology Deployment October 8, 2013 - 2:43pm Addthis The Federal Energy Management Program's (FEMP) Technology Deployment program provides the Federal Government and commercial building sector with unbiased information and guidance about energy-efficient and renewable energy technologies available for deployment. Specifically, this program: Identifies technologies that have high potential energy savings and cost benefits and are ready for rapid deployment Develops and conducts deployment campaigns to raise awareness about energy technologies of the highest priority Educates Federal agencies and the commercial buildings sector about targeted energy-efficient technologies. Learn about: Technology Deployment List: Read about new and underutilized

45

Technology Deployment Matrix Improvements - Updates  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory September 15, 2011 2 | Interagency Technology Deployment Working Group eere.energy.gov Technology Deployment Matrix Improvement Efforts 1. Develop criteria for...

46

Nuclear Deployment Scorecards | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Initiatives Nuclear Reactor Technologies Nuclear Deployment Scorecards Nuclear Deployment Scorecards January 1, 2014 Quarterly Nuclear Deployment Scorecard - January 2014 The...

47

AMF Deployment, Oliktok, Alaska  

NLE Websites -- All DOE Office Websites (Extended Search)

Alaska Alaska Oliktok Deployment AMF Home Oliktok Home Deployment Operations Baseline Instruments and Data Plots at the Archive Outreach News & Press New Sites Fact Sheet (PDF, 1.6MB) Images Contacts Fred Helsel, AMF Operations Lynne Roeder, Media Contact Hans Verlinde, Principal Investigator AMF Deployment, Oliktok Point, Alaska This view shows the location of the Oliktok, Alaska, ARM Mobile Facility. Located at the North Slope of Alaska on the coast of the Arctic Ocean, Oliktok Point is extremely isolated, accessible only by plane. From this remote spot researchers now have access to important data about Arctic climate processes at the intersection of land and sea ice. As of October 2013, Oliktok Point is the temporary home of ARM's third and newest ARM Mobile Facility, or AMF3.

48

The U.S. wind production tax credit - evaluating its impact on wind deployment and assessing the cost of its renewal  

E-Print Network (OSTI)

The desirability, viability, and cost effectiveness of policies designed to incentivize growth of the wind energy industry are subject to widespread debate within the U.S. government, wind industry groups, and the general ...

Ernst, Patrick C. (Patrick Charles)

2013-01-01T23:59:59.000Z

49

Remote Systems Design & Deployment  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

50

Modeling EERE Deployment Programs  

Science Conference Proceedings (OSTI)

The purpose of this report is to compile information and conclusions gathered as part of three separate tasks undertaken as part of the overall project, Modeling EERE Deployment Programs, sponsored by the Planning, Analysis, and Evaluation office within the Department of Energys Office of Energy Efficiency and Renewable Energy (EERE). The purpose of the project was to identify and characterize the modeling of deployment programs within the EERE Technology Development (TD) programs, address improvements to modeling in the near term, and note gaps in knowledge where future research is needed.

Cort, Katherine A.; Hostick, Donna J.; Belzer, David B.; Livingston, Olga V.

2007-11-08T23:59:59.000Z

51

A Simpler, Smarter and More Cost Effective Approach to Regulation |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Simpler, Smarter and More Cost Effective Approach to Regulation A Simpler, Smarter and More Cost Effective Approach to Regulation A Simpler, Smarter and More Cost Effective Approach to Regulation May 26, 2011 - 9:17am Addthis Sean Lev Sean Lev Acting General Counsel & Deputy General Counsel, Environment & Nuclear Programs What does this mean for me? The Department projects a more than 90% reduction in the paperwork burden imposed on recipients of the Department of Energy's financial assistance. The Department is also working to reduce testing burdens. No one likes the burden of paperwork or the headache of navigating a 20-step process just to get an application completed. Earlier this year, President Obama outlined the creation of a 21st-century regulatory system to reduce burdens for American businesses and consumers

52

Changing the Climate: Looking Towards a More Cost Effective, Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Climate: Looking Towards a More Cost Effective, Energy Climate: Looking Towards a More Cost Effective, Energy Efficient Future Changing the Climate: Looking Towards a More Cost Effective, Energy Efficient Future November 18, 2008 - 4:58pm Addthis WASHINGTON, DC - The U.S. Environmental Protection Agency and U.S. Department of Energy are helping states lead the way in an effort to promote low cost energy efficiency. More than 60 energy, environmental and state policy leaders from across the country have come together to produce the updated National Action Plan Vision for 2025: A Framework for Change. The action plan outlines strategies to help lower the growth in energy demand across the country by more than 50 percent, and shows ways to save more than $500 billion in net savings over the next 20 years. These

53

Deployment & Market Transformation (Brochure)  

SciTech Connect

NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

Not Available

2012-04-01T23:59:59.000Z

54

Fusion Power Deployment  

DOE Green Energy (OSTI)

Fusion power plants could be part of a future portfolio of non-carbon dioxide producing energy supplies such as wind, solar, biomass, advanced fission power, and fossil energy with carbon dioxide sequestration. In this paper, we discuss key issues that could impact fusion energy deployment during the last half of this century. These include geographic issues such as resource availability, scale issues, energy storage requirements, and waste issues. The resource needs and waste production associated with fusion deployment in the U.S. should not pose serious problems. One important feature of fusion power is the fact that a fusion power plant should be locatable within most local or regional electrical distribution systems. For this reason, fusion power plants should not increase the burden of long distance power transmission to our distribution system. In contrast to fusion power, regional factors could play an important role in the deployment of renewable resources such as wind, solar and biomass or fossil energy with CO2 sequestration. We examine the role of these regional factors and their implications for fusion power deployment.

J.A. Schmidt; J.M. Ogden

2002-02-06T23:59:59.000Z

55

Deployment & Market Transformation (Brochure)  

SciTech Connect

NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

2012-04-01T23:59:59.000Z

56

Automatic service deployment using virtualisation  

E-Print Network (OSTI)

Manual deployment of the application usually requires expertise both about the underlying system and the application. Automatic service deployment can improve deployment significantly by using on-demand deployment and selfhealing services. To support these features this paper describes an extension the Globus Workspace Service [10]. This extension includes creating virtual appliances for Grid services, service deployment from a repository, and influencing the service schedules by altering execution planning services, candidate set generators or information systems. 1 2 1.

Gabor Kecskemeti; Peter Kacsuk; Gabor Terstyanszky; Tamas Kiss; Thierry Delaitre

2008-01-01T23:59:59.000Z

57

Cost-effectiveness analysis of genetic testing for familial long QT syndrome in symptomatic index cases  

E-Print Network (OSTI)

Cost-Effectiveness Analysis of Genetic Testing for FamilialJ, Russell L, Weinstein M. Cost-effectiveness in health andSakowski J: An introduction to cost- effectiveness and cost-

Phillips, Kathryn A; Ackerman, M J; Sakowski, J; Berul, C I

2005-01-01T23:59:59.000Z

58

Cost-effectiveness of recommended nurse staffing levels for short-stay skilled nursing facility patients  

E-Print Network (OSTI)

Anonymous: Employer Costs for Employee Compensation--BioMed Central Open Access Cost-effectiveness of recommendeddiagnoses. However, the cost-effectiveness of increasing

Ganz, David A; Simmons, Sandra F; Schnelle, John F

2005-01-01T23:59:59.000Z

59

A Framework for Evaluating the Cost-effectiveness of Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

A Framework for Evaluating the Cost-effectiveness of Demand Response Title A Framework for Evaluating the Cost-effectiveness of Demand Response Publication Type Report Year of...

60

Cost-effective wearable sensor to detect EMF  

Science Conference Proceedings (OSTI)

In this paper we present the design of a cost-effective wearable sensor to detect and indicate the strength and other characteristics of the electric field emanating from a laptop display. Our Electromagnetic Field Detector Bracelet can provide an immediate ... Keywords: ambient signals, capacitive sensor, sensing technology, wearable

Cati Vaucelle; Hiroshi Ishii; Joseph A. Paradiso

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Integrated Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Deployment Integrated Deployment Integrated Deployment Integrated technology deployment uses a comprehensive approach to implement a variety of efficiency and renewable energy technology solutions in communities and cities, federal agencies, international locations, and states and territories. need_alt Community Renewable Energy Deployment Webinars Hear about successful community renewable energy projects, including the challenges and barriers faced during development. Learn more Integrated Deployment Projects The following projects provide examples of how the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory have used an integrated approach to address various location-specific energy challenges that is both scalable and replicable around the world:

62

Deployment of Emerging Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment of Emerging Deployment of Emerging Technologies FUPWG November 1, 2006 Brad Gustafson Department of Energy Progress To Date: Federal Standard Buildings 80,000 85,000 90,000 95,000 100,000 105,000 110,000 115,000 120,000 125,000 130,000 135,000 140,000 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 FISCAL YEAR Btu per Gross Square Foot 10% Goal - 1995 (NECPA) 20% Goal - 2000 (EPACT 1992) 30% Goal - 2005 (EO 12902) 35% Goal - 2010 (EO 13123) 29.6% Reduction, 2005 (Preliminary Data) Actual Energy Use Annual Goals (EPACT 2005) Although the Federal Government narrowly missed the 2005 goal, it is on track to meet the 2010 goal * To identify promising emerging technologies and accelerate deployment in Federal sector - Meet the Federal Energy Goals - Lead by Example

63

Sensor Technology Integration for Efficient and Cost-Effective D&D  

Science Conference Proceedings (OSTI)

The deactivation and decommissioning of radiologically contaminated facilities require the use of a multitude of technologies to perform characterization, decontamination, dismantlement, and waste management. Current baseline technologies do not provide adequate tools to perform this work in an efficient and cost-effective manner. Examples of such tasks that can be modified to enhance the D&D work include: floor and wall decontamination, pipe decontamination, and surveillance and monitoring. FIU-HCET's Technology Development, Integration and Deployment (TDID) group aims to enhance the D&D process by integrating sensor technology to existing decontamination and remote surveillance tools. These integrated systems have been demonstrated throughout the DOE Complex and commercial nuclear facilities undergoing decommissioning. Finding new ways of integrating technologies utilized in the decommissioning and surveillance & monitoring process has been a goal of this group during the past several years. Current and previous integration projects include: Mobile Integrated Piping Decontamination and Characterization System, On-Line Decontamination and Characterization System, In-Situ Pipe Decontamination and Unplugging System, Remote Hazardous Environment Surveyor (RHES), and the Online Handheld grit blasting decontamination system As a result of integrating sensors with D&D tools, the resulting technologies have removed the downtime currently found in baseline processes by allowing operators and project managers to have real-time contamination data during the specified D&D process. This added component allows project managers to verify that full decontamination and surveillance has been conducted. Through successful demonstration and deployments of the TDID-developed technologies, FIU-HCET has provided tools that can impact the cost, schedule and health and safety of D&D operations in a positive way, leading to shorter downtimes and significant cost-savings. This paper will discuss the development of technologies currently modified with sensor technology by the TDID group, from conceptual design to Deployment at a DOE or commercial nuclear facility. Cost information associated with the respective technology will also be discussed.

Varona, J. M.; Lagos, L. E.

2002-02-25T23:59:59.000Z

64

Methodology for Fleet Deployment Decisions  

Science Conference Proceedings (OSTI)

Utilities can apply a rigorous, optimized methodology for creating deployment plans for their fossil power plants. These deployment plans maximize corporate-wide value under various business environments. Case studies at Consolidated Edison of New York and Central Illinois Public Service Company (CIPS) refined the approach and confirmed its merit for evaluating fleet deployment decisions.

1995-04-14T23:59:59.000Z

65

Above Bonneville Passage and Propagation Cost Effectiveness Analysis.  

DOE Green Energy (OSTI)

We have developed several models to evaluate the cost-effectiveness of alternative strategies to mitigate hydrosystem impacts on salmon and steelhead, and applied these models to areas of the Columbia River Basin. Our latest application evaluates the cost-effectiveness of proposed strategies that target mainstem survival (e.g., predator control, increases in water velocity) and subbasin propagation (e.g., habitat improvements, screening, hatchery production increases) for chinook salmon and steelhead stocks, in the portion of the Columbia Basin bounded by Bonneville, Chief Joseph, Dworshak, and Hells Canyon darns. At its core the analysis primarily considers financial cost and biological effectiveness, but we have included other attributes which may be of concern to the region.

Paulsen, C.M.; Hyman, J.B.; Wernstedt, K.

1993-05-01T23:59:59.000Z

66

Cost effective air pollution control for geothermal powerplants  

DOE Green Energy (OSTI)

Air pollution control technology developed and demonstrated at The Geysers by the Pacific Gas and Electric Company includes two different, but equally effective methods to reduce the emissions of hydrogen sulfide from geothermal power plants. These technologies may be used in other geothermal areas as well. Cost saving modifications and adaptations needed to apply these technologies in other geothermal areas with different steam composition are described. Cost estimates are presented for some typical cases. If a surface condenser gives poor H/sub 2/S partitioning with ammonia rich steam, neutralizing the ammonia with SO/sub 2/ is a cost effective alternative to secondary abatement with hydrogen peroxide. Nickel is a cost effective alternative to FeHEDTA when an oxidation catalyst is added to the cooling water of a power plant equipped with a contact condenser. 13 ref., 1 fig., 4 tabs.

Weres, O.

1985-03-01T23:59:59.000Z

67

Development and Manufacture of Cost Effective Composite Drill Pipe  

Science Conference Proceedings (OSTI)

This technical report presents the engineering research, process development and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report presents progress made from October 1, 2005 through September 30, 2006 and contains the following discussions: Qualification Testing; Prototype Development and Testing of ''Smart Design'' Configuration; Field Test Demonstration; Development of Ultra-Short Radius Composite Drill Pipe (USR-CDP); and Development of Smart USR-CDP.

James C. Leslie; James C. Leslie, II; Lee Truong; James T. Heard

2006-09-29T23:59:59.000Z

68

Technology Improvement Pathways to Cost-Effective Vehicle Electrification  

DOE Green Energy (OSTI)

Electrifying transportation can reduce or eliminate dependence on foreign fuels, emission of green house gases, and emission of pollutants. One challenge is finding a pathway for vehicles that gains wide market acceptance to achieve a meaningful benefit. This paper evaluates several approaches aimed at making plug-in electric vehicles (EV) and plug-in hybrid electric vehicles (PHEVs) cost-effective including opportunity charging, replacing the battery over the vehicle life, improving battery life, reducing battery cost, and providing electric power directly to the vehicle during a portion of its travel. Many combinations of PHEV electric range and battery power are included. For each case, the model accounts for battery cycle life and the national distribution of driving distances to size the battery optimally. Using the current estimates of battery life and cost, only the dynamically plugged-in pathway was cost-effective to the consumer. Significant improvements in battery life and battery cost also made PHEVs more cost-effective than today's hybrid electric vehicles (HEVs) and conventional internal combustion engine vehicles (CVs).

Brooker, A.; Thornton, M.; Rugh, J. P.

2010-04-01T23:59:59.000Z

69

Vehicle Technologies Office: Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Our nation's energy security depends on the efficiency of our transportation system and on which fuels we use. Transportation in the United States already consumes much more oil than we produce here at home and the situation is getting worse. Domestic oil production has been dropping steadily for over 20 years, and experts predict that by 2025, about 70% of our oil will be imported. The U.S. Department of Energy's (DOE's) Vehicle Technologies Office supports research and development (R&D) that will lead to new technologies that reduce our nation's dependence on imported oil, further decrease vehicle emissions, and serve as a bridge from today's conventional powertrains and fuels to tomorrow's hydrogen-powered hybrid fuel cell vehicles. The Vehicle Technologies Office also supports implementation programs that help to transition alternative fuels and vehicles into the marketplace, as well as collegiate educational activities to help encourage engineering and science students to pursue careers in the transportation sector. Following are some of the activities that complement the Vehicle Technologies Office's mission.

70

Economics of ALMR deployment  

SciTech Connect

The Advanced Liquid Metal Reactor (ALMR) has the potential to extend the economic life of the nuclear option and of reducing the number of high level waste repositories which will eventually be needed in an expanding nuclear economy. This paper reports on an analysis which models and evaluates the economics of the use of ALMRs as a component of this country`s future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel) or from surplus weapons grade material. While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment.

Delene, J.G.; Fuller, L.C.; Hudson, C.R.

1994-12-31T23:59:59.000Z

71

Building Diagnostic Market Deployment - Final Report  

SciTech Connect

The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energys Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of automated fault de4tection and diagnostic (AFDD) tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction, and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: 1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, 2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and 3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations.

Katipamula, Srinivas; Gayeski, N.

2012-04-01T23:59:59.000Z

72

NREL: Technology Deployment - Solar Deployment and Market Transformation  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Deployment and Market Transformation Solar Deployment and Market Transformation NREL enables faster, easier, and less expensive solar installations by applying our expertise and knowledge to projects that addresses challenges, inefficiencies, and market barriers to solar technology deployment. Northeast Denver Housing Center Solarize Grassroots Movement Drives Down Solar Prices 30% in Portland, Oregon Solarize Northeast Denver Housing Center NREL Identifies PV for 28 Affordable Housing Units Our technical experts work with policymakers, program administrators, regulators, utilities, transmission organizations, technology developers, financial organizations, and insurance companies to help break down barriers to solar technology deployment by: Developing and delivering policy and market design trainings

73

PNNL-21294 Methodology for Evaluating Cost- Effectiveness of Residential Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

1294 1294 Methodology for Evaluating Cost- Effectiveness of Residential Energy Code Changes ZT Taylor N Fernandez RG Lucas April 2012 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 iii Contents 1.0 Introduction .................................................................................................................................. 1.1 2.0 Estimating Energy Savings of Code Changes .............................................................................. 2.1 2.1 Building Energy Use Simulation Assumptions and Methodology ....................................... 2.1 2.1.1 Energy Simulation Tool ............................................................................................ 2.1

74

Cost Effectiveness for Solar Control Film for Residential Applications  

E-Print Network (OSTI)

For the existing housing, retrofitting single or double glazed clear glass window with solar films can be an effective measure to reduce their peak power demand, and large scale application of the same on national level can be an effective tool for demand side management. This paper analyses the field performance data of a solar control film, retrofitted in a Kuwait villa, for establishing its technical viability and cost effectiveness. The paper concludes that the solar film, besides enhancing the thermal comfort, reduced the peak cooling demand and the peak power demand by 6.7% and 4.7%, respectively, during the peak summer period.

Al-Taqi, H. H.; Maheshwari, G. P.; Alasseri, R.

2010-01-01T23:59:59.000Z

75

DEVELOPMENT AND MANUFACTURE OF COST EFFECTIVE COMPOSITE DRILL PIPE  

SciTech Connect

This technical report presents the engineering research, process development and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report presents progress made from October 1, 2003 through September 30, 2004 and contains the following discussions: (1) Direct Electrical Connection for Rotary Shoulder Tool Joints; (2) Conductors for inclusion in the pipe wall (ER/DW-CDP); (3) Qualify fibers from Zoltek; (4) Qualify resin from Bakelite; (5) First commercial order for SR-CDP from Integrated Directional Resources (SR-CDP); and (6) Preparation of papers for publication and conference presentations.

James C. Leslie; James C. Leslie II; Lee Truong; James T. Heard; Peter Manekas

2005-03-18T23:59:59.000Z

76

Cost-effective ceramics program in the United States  

DOE Green Energy (OSTI)

The 5-year Cost-Effective Ceramics for Heat Engines program began in 1993. This effort reflects the realization that the problems with reliability of structural ceramics have been largely overcome, but the high cost of structural ceramics is limited their use in commercial applications. The technical causes of high cost were identified, and a technical plan developed. The work elements in the program include the following: economic cost modeling, ceramic machining, powder synthesis, alternative forming and densification processes, yield improvement, standards development, and low-expansion ceramics.

Schulz, R.B. [USDOE, Washington, DC (United States); Johnson, D.R. [Oak Ridge National Lab., TN (United States)

1994-10-01T23:59:59.000Z

77

Facilitating Sound, Cost-Effective Federal Energy Management (Fact Sheet)  

SciTech Connect

This fact sheet is an overview of the U.S. Department of Energy's Federal Energy Management Program (FEMP). The Federal Government, as the nation's largest energy consumer, has a tremendous opportunity and acknowledged responsibility to lead by example. The U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP) plays a critical role in this effort. FEMP facilitates the Federal Government's implementation of sound, cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship. FEMP does this by focusing on the needs of its Federal customers, delivering an array of services across a variety of program areas.

Not Available

2012-03-01T23:59:59.000Z

78

Buildings Technologies Deployment | Clean energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment SHARE Building Technologies Deployment benchmarking commercial buildings Once building technologies emerge and become commercially available, only in...

79

Community Renewable Energy Deployment Success Stories: Financing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Community Renewable Energy Deployment Success Stories: Financing Renewable Energy Projects Webinar Community Renewable Energy Deployment Success Stories: Financing Renewable Energy...

80

Cost effectiveness of the 1993 Model Energy Code in Colorado  

SciTech Connect

This report documents an analysis of the cost effectiveness of the Council of American Building Officials` 1993 Model Energy Code (MEC) building thermal-envelope requirements for single-family homes in Colorado. The goal of this analysis was to compare the cost effectiveness of the 1993 MEC to current construction practice in Colorado based on an objective methodology that determined the total life-cycle cost associated with complying with the 1993 MEC. This analysis was performed for the range of Colorado climates. The costs and benefits of complying with the 1993 NIEC were estimated from the consumer`s perspective. The time when the homeowner realizes net cash savings (net positive cash flow) for homes built in accordance with the 1993 MEC was estimated to vary from 0.9 year in Steamboat Springs to 2.4 years in Denver. Compliance with the 1993 MEC was estimated to increase first costs by $1190 to $2274, resulting in an incremental down payment increase of $119 to $227 (at 10% down). The net present value of all costs and benefits to the home buyer, accounting for the mortgage and taxes, varied from a savings of $1772 in Springfield to a savings of $6614 in Steamboat Springs. The ratio of benefits to costs ranged from 2.3 in Denver to 3.8 in Steamboat Springs.

Lucas, R.G.

1995-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Development and Manufacture of Cost Effective Composite Drill Pipe  

SciTech Connect

This technical report presents the engineering research, process development and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report presents progress made from October 1, 2004 through September 30, 2005 and contains the following discussions: (1) Qualification Testing; (2) Prototype Development and Testing of ''Smart Design'' Configuration; (3) Field Test Demonstration; and (4) Commercial order for SR-CDP from Torch International. The objective of this contract is to develop and demonstrate ''cost effective'' Composite Drill Pipe. It is projected that this drill pipe will weigh less than half of its steel counter part. The resultant weight reduction will provide enabling technology that will increase the lateral distance that can be reached from an offshore drilling platform and the depth of water in which drilling and production operations can be carried out. Further, composite drill pipe has the capability to carry real time signal and power transmission within the pipe walls. CDP can also accommodate much shorter drilling radius than is possible with metal drill pipe. As secondary benefits, the lighter weight drill pipe can increase the storage capability of floating off shore drilling platforms and provide substantial operational cost savings.

James C. Leslie; James C. Leslie II; Lee Truong; James T. Heard; Steve Loya

2006-02-20T23:59:59.000Z

82

On test suite composition and cost-effective regression testing  

E-Print Network (OSTI)

Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost-effectiveness of these methodologies has been shown to vary with characteristics of regression test suites. One such characteristic involves the way in which test inputs are composed into test cases within a test suite. This article reports the results of controlled experiments examining the effects of two factors in test suite composition test suite granularity and test input grouping on the costs and benefits of several regression-testing-related methodologies: retest-all, regression test selection, test suite reduction, and test case prioritization. These experiments consider the application of several specific techniques, from each of these methodologies, across ten releases each of two substantial software systems, using seven levels of test suite granularity and two types of test input grouping. The effects of granularity, technique, and grouping on the cost and fault-detection effectiveness of regression testing under the given methodologies are analyzed. This analysis shows that test suite granularity significantly affects several cost-benefit factors for the methodologies considered, while test input grouping has limited effects. Further, the results expose essential tradeoffs affecting the relationship between test suite design and regression testing cost-effectiveness, with several implications for practice. 1

Gregg Rothermel; Sebastian Elbaum; Alexey Malishevsky; Praveen Kallakuri

2004-01-01T23:59:59.000Z

83

Technology Improvement Pathway to Cost-effective Vehicle Electrification: Preprint  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

454 454 February 2010 Technology Improvement Pathways to Cost-Effective Vehicle Electrification Preprint A. Brooker, M. Thornton, and J. Rugh National Renewable Energy Laboratory To be presented at SAE 2010 World Congress Detroit, Michigan April 13-15, 2010 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (ASE), a contractor of the US Government under Contract No. DE-AC36-08-GO28308. Accordingly, the US Government and ASE retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes. This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any

84

DUCRETE Shielding: A Cost Effective Alternative Radiation Shield  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary Submitted to Spectrum 2000, Sept 24-28, 2000, Chattanooga, TN Summary Submitted to Spectrum 2000, Sept 24-28, 2000, Chattanooga, TN DUCRETE: A Cost Effective Radiation Shielding Material W. J. Quapp, Starmet CMI W. H. Miller, University of Missouri-Columbia James Taylor, Starmet CMI Colin Hundley, Starmet CMI Nancy Levoy, Starmet Corporation 1. INTRODUCTION A consequence of uranium enrichment in the US has been the accumulation of nearly 740,000 metric tons of depleted uranium hexafluoride (UF 6 ) tails. 1 While this material was once considered a feed stock for the United States Breeder Reactor Program, it is no longer needed. Alternative uses of depleted uranium are few. Some have been used for medical isotope transport casks, some for industrial radioactive source shields, some for military anti-tank

85

Cost-effective energy efficiency in the Czech Republic  

SciTech Connect

Energy efficiency is a particularly important issue in the emerging economies of Eastern Europe. Much of the energy used in the Czech Republic is supplied by lignite, a soft brown form of coal. Its combustion is largely responsible for an extreme acid rain problem and other forms of air pollution and land use complications. Additionally, inefficient energy use is prevalent, placing additional stresses on an already fragile economy. This paper reports on a project in the mid-sized (250,000 residents) and industrial city of Plzen, in the Czech Republic. The Facility Energy Decision Screening (FEDS) process, developed by PNL for the U.S. Department of Energy`s (DOE`s) Federal Energy Management Program (FEMP), was applied to the city to determine the level of cost-effective energy efficiency potential in the city. Significant potential was found to exist, primarily in large, cooperatively owned apartment buildings heated by district systems.

Shankle, S.A.; Secrest, T.J. [Pacific Northwest Lab., Richland, WA (United States); Zemen, Z.; Popelka, A.

1994-08-01T23:59:59.000Z

86

Facilitating Sound, Cost-Effective Federal Energy Management (Fact Sheet)  

SciTech Connect

This fact sheet is an overview of the U.S. Department of Energy's Federal Energy Management Program (FEMP). The Federal Government, as the nation's largest energy consumer, has a tremendous opportunity and acknowledged responsibility to lead by example. The U.S. Department of Energy's (DOE's) Federal Energy Management Program (FEMP) plays a critical role in this effort. FEMP facilitates the Federal Government's implementation of sound, cost-effective energy management and investment practices to enhance the nation's energy security and environmental stewardship. FEMP does this by focusing on the needs of its Federal customers, delivering an array of services across a variety of program areas.

2012-03-01T23:59:59.000Z

87

Rapid Deployment of Rich Catalytic Combustion  

SciTech Connect

The overall objective of this research under the Turbines Program is the deployment of fuel flexible rich catalytic combustion technology into high-pressure ratio industrial gas turbines. The resulting combustion systems will provide fuel flexibility for gas turbines to burn coal derived synthesis gas or natural gas and achieve NO{sub x} emissions of 2 ppmvd or less (at 15 percent O{sub 2}), cost effectively. This advance will signify a major step towards environmentally friendly electric power generation and coal-based energy independence for the United States. Under Phase 1 of the Program, Pratt & Whitney (P&W) performed a system integration study of rich catalytic combustion in a small high-pressure ratio industrial gas turbine with a silo combustion system that is easily scalable to a larger multi-chamber gas turbine system. An implementation plan for this technology also was studied. The principal achievement of the Phase 1 effort was the sizing of the catalytic module in a manner which allowed a single reactor (rather than multiple reactors) to be used by the combustion system, a conclusion regarding the amount of air that should be allocated to the reaction zone to achieve low emissions, definition of a combustion staging strategy to achieve low emissions, and mechanical integration of a Ceramic Matrix Composite (CMC) combustor liner with the catalytic module.

Richard S. Tuthill

2004-06-10T23:59:59.000Z

88

ITS Deployment Tracking.pub  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Deployment Statistics Database Oak Ridge National Laboratory managed by UT-Battelle, LLC for the U.S. Department of Energy under Contract number DE-AC05-00OR22725 Research...

89

Cost and cost-effectiveness of standard methadone maintenance treatment compared to enriched 180-day methadone detoxification.  

E-Print Network (OSTI)

Theoretical foundations of cost-effectiveness analysis, in:B. & Weinstein, M. C. (Eds) Cost-effectiveness in health andK. L. & Hall, S. M. (1999) A cost-effectiveness and cost-

2004-01-01T23:59:59.000Z

90

Cost-Effectiveness of Electricity Energy Efficiency Programs  

E-Print Network (OSTI)

We analyze the cost-effectiveness of electric utility rate payerfunded programs to promote demand-side management (DSM) and energy efficiency investments. We develop a conceptual model that relates demand growth rates to accumulated average DSM capital per customer and changes in energy prices, income, and weather. We estimate that model using nonlinear least squares for two different utility samples. Based on the results for the most complete sample, we find that DSM expenditures over the last 18 years have resulted in a central estimate of 1.1 percent electricity savings at a weighted average cost to utilities (or other program funders) of about 6 cents per kWh saved. Econometrically-based policy simulations find that incremental DSM spending by utilities that had no or relatively low levels of average DSM spending per customer in 2006 could produce 14 billion kWh in additional savings at an expected incremental cost to the utilities of about 3 cents per kWh saved.

Toshi H. Arimura; Richard G. Newell; Karen Palmer

2009-01-01T23:59:59.000Z

91

DEVELOPMENT AND MANUFACTURE OF COST EFFECTIVE COMPOSITE DRILL PIPE  

Science Conference Proceedings (OSTI)

This technical report presents the engineering research and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report discusses and illustrates all progress in the first two years of this NETL/DOE supported program. The following have been accomplished and are reported in detail herein: (1) Specifications for both 5 5/16 inch and 3 3/8 inch composite drill pipe have been finalized. (2) All basic laboratory testing has been completed and has provide sufficient data for the selection of materials for the composite tubing, adhesives, and abrasion coatings. (3) Successful demonstration of composite/metal joint interfacial connection. (4) Upgrade of facilities to provide a functional pilot plant manufacturing facility. (5) Arrangements to have the 3 3/8 inch CDP used in a drilling operation early in C.Y. 2002. (6) Arrangements to have the 5 5/16 inch CDP marketed and produced by a major drill pipe manufacturer.

James C. Leslie; Jeffrey R. Jean; Hans Neubert; Lee Truong

2001-10-30T23:59:59.000Z

92

Cost-Effective Industrial Boiler Plant Efficiency Advancements  

E-Print Network (OSTI)

Natural gas and electricity are expensive to the extent that annual fuel and power costs can approach the initial cost of an industrial boiler plant. Within this context, this paper examines several cost-effective efficiency advancements that were implemented during a recently completed boiler plant replacement project at a large semiconductor manufacturing complex. The "new" boiler plant began service in November, 1996 and consists of four 75,000 lb/hr water-tube boilers burning natural gas and producing 210 psig saturated steam for heating and humidification. Efficiency advancements include: 1) Reheating of cleanroom make-up air with heat extracted during precooling. 2) Preheating of combustion air with heat extracted from boiler flue gas. 3) Preheating of boiler feedwater with heat extracted from the exhaust of a nearby gas turbine. 4) Variable speed operation of boiler feedwater pumps and forced-draft fans. 5) Preheating of boiler make-up water with heat extracted from boiler blow-down. These efficiency advancements should prove of interest to industrial energy users faced with replacement of aging, inefficient boiler plants, rising fuel and power prices, and increasing pressures to reduce operating costs in order to enhance competitiveness.

Fiorino, D. P.

1997-04-01T23:59:59.000Z

93

A Cost Effective, Integrated and Smart Radioactive Safeguard System  

E-Print Network (OSTI)

Nuclear energy is a growing field worldwide due to its wide range of applications in various walks of life. It, however, deals with radioactive materials, specifically special nuclear material, which, if misused, could result in catastrophic consequences. In order to protect this precious resource and ensure its use for the good of mankind, safeguard systems are more important than ever. Current Market solutions are wide ranged but have a large number of disadvantages, some of which include high cost, constant updates, and incomplete efforts. The rising need of a cost effective, efficient, and integrated radioactive safeguard system serves as motivation for the solution outlined in this thesis. The thesis outlines a solution structured around the three pillars of the international safeguards program, namely, visual surveillance and motion detection, containment analysis, and non-destructive analysis. The hardware around each of these pillars work together with a clean and user-friendly application to provide a secure safeguards system that is both flexible and extensible.

Singh, Harneet

2010-12-01T23:59:59.000Z

94

Development and Manufacture of Cost Effective Composite Drill Pipe  

SciTech Connect

This technical report presents the engineering research and data accomplishments that have transpired to date in support of the development of Cost Effective Composite Drill Pipe (CDP). The report reiterates the presentation made to DOE/NETL in Morgantown, WV on August 1st, 2002 with the addition of accomplishments made from that time forward until the issue date. The following have been accomplished and are reported in detail herein: {sm_bullet} Specifications for both 5-1/2'' and 1-5/8'' composite drill pipe have been finalized. {sm_bullet} Full scale testing of Short Radius (SR) CDP has been conducted. {sm_bullet} Successful demonstration of metal to composite interface (MCI) connection. {sm_bullet} Preparations for full scale manufacturing of ER/DW CDP have begun. {sm_bullet} Manufacturing facility rearranged to accommodate CDP process flow through plant. {sm_bullet} Arrangements to have the 3 3/8'' CDP used in 4 separate drilling applications in Oman, Oklahoma, and Texas.

James C. Leslie; Jeffrey R. Jean; Hans Neubert; Lee Truong; James T. Heard

2002-09-29T23:59:59.000Z

95

and Cost-Effective Climate-Change Policy  

E-Print Network (OSTI)

Climate change proposals currently under consideration include both a cap-and-trade program to curb greenhouse gas (GHS) emissions and a nationwide renewable electricity standard (RES). Some proposals permit a portion of the renewable electricity requirement to be satisfied by adopting energy efficiency measures, while others include a separate efficiency requirement. This paper examines how these approaches fit together, the costs associated with substantially expanding the portion of electricity generated by renewable resources, and the potential savings from incorporating energy efficiency into an RES. It is now generally accepted that cost-effective environmental regulation uses market mechanisms, such as a tax or a cap-and-trade program, in order to leave choices about the leastcost ways of achieving policy goals to individual producers and consumers. An RES represents the opposite of a market-oriented approach, because it prescribes technologies regardless of cost, rather than prescribing a goal and allowing the market to choose least-cost technologies. Under a cap-and-trade program, an RES is unnecessary to achieve GHG emissionsreduction goals. Moreover, an RES will reduce the economic efficiency advantages of a capand-trade program and raise the cost of achieving any given level of GHG emissions reduction.

Thomas M. Lenard; Thomas M. Lenard

2009-01-01T23:59:59.000Z

96

Financing; A Cost Effective Alternative When Upgrading Energy Efficient Systems  

E-Print Network (OSTI)

In the 1990's, many organizations are attempting to do more, faster, with less cost and improved quality. In many cases, this involves improving the efficiency of their systems. Increased competition is creating pressure to continuously improve in order to effectively compete in the marketplace. One obvious method of reducing costs and improving productivity is to upgrade old, antiquated equipment such as lighting to more modern energy efficient systems. Most projects provide a return on investment to the owner in several years, through energy and demand savings, Power Utility rebates, maintenance savings and increased productivity, however, the initial capital expense required is cost prohibitive. Budget constraints, a lengthy and complicated approval process and large up-front capital requirements are only a few "road blocks" to improvement. In order to make an equipment acquisition, every company must consider how they will pay for it! How do companies acquire the equipment they need to be more competitive? One cost effective solution -FINANCING! There are numerous benefits to both the end user customer (Lessee) and the installing contractor from utilizing financing to upgrade or retrofit to energy efficient systems. It is possible to provide design, material, installation, maintenance and soft costs as well as positive cash flow to the end user by structuring financing terms and payments around the energy savings. A wide array of programs and services are offered by many different financial organizations.

Ertle, J. M.

1994-04-01T23:59:59.000Z

97

Toward a Systematic Framework for Deploying Synchrophasors  

E-Print Network (OSTI)

Toward a Systematic Framework for Deploying Synchrophasors and their Utilization for Improving for Deploying Synchrophasors and their Utilization for Improving Performance of Future Electric Energy Systems a Systematic Framework for Deploying Synchrophasors and their Utilization for Improving Performance of Future

98

Federal Energy Management Program: Technology Deployment Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment Resources to someone by E-mail Share Federal Energy Management Program: Technology Deployment Resources on Facebook Tweet about Federal Energy Management...

99

Federal Energy Management Program: Technology Deployment Goals...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment Goals and Initiatives to someone by E-mail Share Federal Energy Management Program: Technology Deployment Goals and Initiatives on Facebook Tweet about...

100

ARM - News : AMF Deployment, Shouxian, China  

NLE Websites -- All DOE Office Websites (Extended Search)

ChinaNews : AMF Deployment, Shouxian, China Shouxian Deployment AMF Home Shouxian Home Data Plots and Baseline Instruments Experiment Planning Proposal Science Plan, (PDF, 1,257K)...

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Renewable Energy Technology Development, Deployment, and Education...  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Powered Truck 68 Fork Lift Trucks Deployed in Industry Renewable Energy Technology Development, Deployment, and Education in South Carolina EDPSC-SRNL Install Advanced Offshore...

102

Quarterly Nuclear Deployment Scorecard - October 2013 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quarterly Nuclear Deployment Scorecard - October 2013 Quarterly Nuclear Deployment Scorecard - October 2013 News Updates Dominion has filed an updated integrated resource plan with...

103

Deploying Systems Interoperability and Customer Choice within...  

NLE Websites -- All DOE Office Websites (Extended Search)

Deploying Systems Interoperability and Customer Choice within Smart Grid Title Deploying Systems Interoperability and Customer Choice within Smart Grid Publication Type Conference...

104

ANALYSIS OF THE PERFORMANCE AND COST EFFECTIVENESS OF NINE SMALL WIND ENERGY CONVERSION SYSTEMS FUNDED BY THE DOE SMALL GRANTS PROGRAM  

SciTech Connect

This report presents an analysis of the technical performance and cost effectiveness of nine small wind energy conversion systems (SWECS) funded during FY 1979 by the U.S. Department of Energy. Chapter 1 gives an analytic framework with which to evaluate the systems. Chapter 2 consists of a review of each of the nine projects, including project technical overviews, estimates of energy savings, and results of economic analysis. Chapter 3 summarizes technical, economic, and institutional barriers that are likely to inhibit widespread dissemination of SWECS technology.

Kay, J.

1982-04-01T23:59:59.000Z

105

Cost effective waste management through composting in Africa  

Science Conference Proceedings (OSTI)

Highlights: Black-Right-Pointing-Pointer The financial/social/institutional sustainability of waste management in Africa is analysed. Black-Right-Pointing-Pointer This note is a compendium of a study on the potential for GHG control via improved zero waste in Africa. Black-Right-Pointing-Pointer This study provides the framework for Local Authorities for realizing sustained GHG reductions. - Abstract: Greenhouse gas (GHG) emissions per person from urban waste management activities are greater in sub-Saharan African countries than in other developing countries, and are increasing as the population becomes more urbanised. Waste from urban areas across Africa is essentially dumped on the ground and there is little control over the resulting gas emissions. The clean development mechanism (CDM), from the 1997 Kyoto Protocol has been the vehicle to initiate projects to control GHG emissions in Africa. However, very few of these projects have been implemented and properly registered. A much more efficient and cost effective way to control GHG emissions from waste is to stabilise the waste via composting and to use the composted material as a soil improver/organic fertiliser or as a component of growing media. Compost can be produced by open windrow or in-vessel composting plants. This paper shows that passively aerated open windrows constitute an appropriate low-cost option for African countries. However, to provide an usable compost material it is recommended that waste is processed through a materials recovery facility (MRF) before being composted. The paper demonstrates that material and biological treatment (MBT) are viable in Africa where they are funded, e.g. CDM. However, they are unlikely to be instigated unless there is a replacement to the Kyoto Protocol, which ceases for Registration in December 2012.

Couth, R. [CRECHE, Centre for Environmental, Coastal and Hydrological Engineering, Civil Engineering Programme, School of Engineering, University of KwaZulu-Natal, Durban 4041 (South Africa); Trois, C., E-mail: troisc@ukzn.ac.za [CRECHE, Centre for Environmental, Coastal and Hydrological Engineering, Civil Engineering Programme, School of Engineering, University of KwaZulu-Natal, Durban 4041 (South Africa)

2012-12-15T23:59:59.000Z

106

Newberry Seismic Deployment Fieldwork Report  

DOE Green Energy (OSTI)

This report summarizes the seismic deployment of Lawrence Livermore National Laboratory (LLNL) Geotech GS-13 short-period seismometers at the Newberry Enhanced Geothermal System (EGS) Demonstration site located in Central Oregon. This Department of Energy (DOE) demonstration project is managed by AltaRock Energy Inc. AltaRock Energy had previously deployed Geospace GS-11D geophones at the Newberry EGS Demonstration site, however the quality of the seismic data was somewhat low. The purpose of the LLNL deployment was to install more sensitive sensors which would record higher quality seismic data for use in future seismic studies, such as ambient noise correlation, matched field processing earthquake detection studies, and general EGS microearthquake studies. For the LLNL deployment, seven three-component seismic stations were installed around the proposed AltaRock Energy stimulation well. The LLNL seismic sensors were connected to AltaRock Energy Gueralp CMG-DM24 digitizers, which are powered by AltaRock Energy solar panels and batteries. The deployment took four days in two phases. In phase I, the sites were identified, a cavity approximately 3 feet deep was dug and a flat concrete pad oriented to true North was made for each site. In phase II, we installed three single component GS-13 seismometers at each site, quality controlled the data to ensure that each station was recording data properly, and filled in each cavity with native soil.

Wang, J; Templeton, D C

2012-03-21T23:59:59.000Z

107

Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of  

NLE Websites -- All DOE Office Websites (Extended Search)

1: June 11, 2012 1: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional to someone by E-mail Share Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional on Facebook Tweet about Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional on Twitter Bookmark Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional on Google Bookmark Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional on Delicious Rank Vehicle Technologies Office: Fact #731: June 11, 2012 Cost-Effectiveness of a Hybrid Vehicle is Highly Conditional on Digg

108

AMF Deployment, Black Forest, Germany  

NLE Websites -- All DOE Office Websites (Extended Search)

Germany Germany Black Forest Deployment AMF Home Black Forest Home Data Plots and Baseline Instruments CERA COPS Data University of Hohenheim COPS Website COPS Update, April 2009 Experiment Planning COPS Proposal Abstract and Related Campaigns Science Plan (PDF, 12.4M) Outreach COPS Backgrounder (PDF, 306K) Posters AMF Poster, German Vesion Researching Raindrops in the Black Forest News Campaign Images AMF Deployment, Black Forest, Germany Main Site: 48° 32' 24.18" N, 08° 23' 48.72" E Altitude: 511.43 meters In March 2007, the third deployment of the ARM Mobile Facility (AMF) will take place in the Black Forest region of Germany, where scientists will study rainfall resulting from atmospheric uplift (convection) in mountainous terrain, otherwise known as orographic precipitation. ARM

109

Rational Deployment of CSP Heuristics  

E-Print Network (OSTI)

Heuristics are crucial tools in decreasing search effort in varied fields of AI. In order to be effective, a heuristic must be efficient to compute, as well as provide useful information to the search algorithm. However, some well-known heuristics which do well in reducing backtracking are so heavy that the gain of deploying them in a search algorithm might be outweighed by their overhead. We propose a rational metareasoning approach to decide when to deploy heuristics, using CSP backtracking search as a case study. In particular, a value of information approach is taken to adaptive deployment of solution-count estimation heuristics for value ordering. Empirical results show that indeed the proposed mechanism successfully balances the tradeoff between decreasing backtracking and heuristic computational overhead, resulting in a significant overall search time reduction.

Tolpin, David

2011-01-01T23:59:59.000Z

110

Deploying Emerging Technologies in ESPC  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deploying Emerging Technologies in Deploying Emerging Technologies in ESPC Charles Williams with Mike Holda and Anthony Radspieler Lawrence Berkeley National Laboratory For More Information * Would you like to know more about this presentation? * Charles Williams * Lawrence Berkeley National Laboratory * One Cyclotron Road, MS90R3111 Berkeley CA 94720 * CHWilliams@lbl.gov Deploying Emerging Technologies * Goals/Objective * Define emerging technologies * Examples of emerging technologies in ESPC projects - lessons learned * Describe actions taken to incorporate ET in ESPCs * Results to date * Feedback, suggestions Emerging Technologies in ESPCs Goal/Objective: -Tool to help reach Executive Order 13423, EPACT 2005 and EISA energy use reduction goals -Means to acquire energy savings otherwise not attainable, and build larger

111

A Cost-Effective Oxygen Separation System Based on Open Gradient...  

NLE Websites -- All DOE Office Websites (Extended Search)

Feed Systems A Cost-Effective Oxygen Separation System Based on Open Gradient Magnetic Field by Polymer Beads ITN Energy Systems, Inc. Project Number: SC0010151 Project Description...

112

The sunk cost effect of time : an exploration and an explanation  

E-Print Network (OSTI)

Ayton, P. (1999). The sunk cost and concorde effects: Are1985). The psychology of sunk cost. Organizational Behaviorestimates in the sunk cost effect. Journal of Behavioral

Navarro, Anton Domingo

2007-01-01T23:59:59.000Z

113

Cost-effectiveness of bupropion, nortriptyline, and psychological intervention in smoking cessation.  

E-Print Network (OSTI)

+ Placebo + Nortrip + Bup + MM MM/PI MM MM Table 2 Cost andincremental cost-effectiveness of smoking cessationestimates) Subjects Cost per person treated Percent Mean

Hall, Sharon M; Lightwood, James M; Humfleet, Gary L; Bostrom, Alan; Reus, Victor I; Muoz, Ricardo

2005-01-01T23:59:59.000Z

114

For appliances, choosing the most cost-effective option depends on ...  

U.S. Energy Information Administration (EIA)

Consumers in the market for new appliances have a wide range of choices that likely vary by cost, options, and efficiency level. If energy cost effectiveness is a ...

115

Patents Outside of the U.S.: A Cost-Effective Approach  

Science Conference Proceedings (OSTI)

Patents Outside of the U.S.: A Cost-Effective Approach. David V. Radack. Obtaining patent coverage outside of the United States is an expensive and...

116

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar Cells  

Cost-Effective Replacement for Iodide in Dye-Sensitized Solar Cells Contact Information: Jeremy Nelson Phone: 970.491.7100 Email: jeremy.nelson@colostate.edu

117

NREL: Technology Deployment - Clean Cities  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Cities Clean Cities NREL assists the U.S. Department of Energy's Clean Cities program in supporting local actions to reduce petroleum use in transportation by providing technical assistance, educational and outreach publications, and coordinator support. Clean Cities is a national network of nearly 100 coalitions that bring together stakeholders in the public and private sectors to deploy alternative and renewable fuels, advanced vehicles, fuel economy improvements, idle-reduction measures, and new transportation technologies as they emerge. Technical Assistance NREL engineers and researchers provide hands-on technical assistance to help Clean Cities coalitions, stakeholders, manufacturers, and fuel providers overcome obstacles to deploying alternative fuels and advanced

118

Federal Energy Management Program: Technology Deployment List  

NLE Websites -- All DOE Office Websites (Extended Search)

List to someone by E-mail List to someone by E-mail Share Federal Energy Management Program: Technology Deployment List on Facebook Tweet about Federal Energy Management Program: Technology Deployment List on Twitter Bookmark Federal Energy Management Program: Technology Deployment List on Google Bookmark Federal Energy Management Program: Technology Deployment List on Delicious Rank Federal Energy Management Program: Technology Deployment List on Digg Find More places to share Federal Energy Management Program: Technology Deployment List on AddThis.com... Energy-Efficient Products Technology Deployment Technology Deployment List Solid-State Lighting Working Group Renewable Energy Technology Deployment List Technology Ranking Criteria Technologies featured in the Technology Deployment List were ranked by:

119

Optimal deployment of solar index  

SciTech Connect

There is a growing trend, generally caused by state-specific renewable portfolio standards, to increase the importance of renewable electricity generation within generation portfolios. While RPS assist with determining the composition of generation they do not, for the most part, dictate the location of generation. Using data from various public sources, the authors create an optimal index for solar deployment. (author)

Croucher, Matt

2010-11-15T23:59:59.000Z

120

NREL: Technology Deployment - Microgrid Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Microgrid Design Microgrid Design Photo of a microgrid test site at the National Wind Technology Center. NREL designs independent electrical generation and distribution systems called microgrids, which deliver energy that is reliable, economical, and sustainable. NREL experts work with military, government, industry, and other organizations that cannot afford to lose power to develop reliable and cost-effective microgrid systems. Expertise and Knowledge NREL offers microgrid technical expertise and project support that includes engineering, energy analysis and modeling, financial analysis, and energy management. Our comprehensive and innovative approach to microgrid design is called Continuously Optimized Reliable Energy (CORE) Microgrids. The CORE microgrid approach includes advantages such as:

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Sponsor a student project Businesses looking for innovative, cost-effective solutions to their  

E-Print Network (OSTI)

Sponsor a student project Businesses looking for innovative, cost-effective solutions with academic supervision. Benefit from cost effective project work Sponsoring organisations benefit from on the project in June. Costs and project scope are discussed on a project by project basis. MSc by Research

122

A spatially-distributed cost-effectiveness analysis framework for controlling water pollution  

Science Conference Proceedings (OSTI)

With the aim of comparing various agro-environmental measures to control pesticide pollution in surface waters, we propose a methodological framework for spatially-distributed cost-effectiveness analysis. We use the Soil and Water Assessment Tool (SWAT) ... Keywords: Bio-economic modelling, Cost-effectiveness analysis, Integrated modelling, Pesticides, SWAT

Jean-Marie Lescot; Paul Bordenave; Kevin Petit; Odile Leccia

2013-03-01T23:59:59.000Z

123

On cost-effectiveness of human-centered and socially acceptable robot and automation systems  

Science Conference Proceedings (OSTI)

This paper considers human-centered and socially appropriate robots as well as automation systems within the context of their cost-effectiveness. Usually, the objection of system designers is that approaches for human-centered and socio-technical design ... Keywords: Cost-effective automation, Human factors, Human-centered systems, Robots, Socially appropriate automation, Socio-technical systems

Janko Cernetic

2003-06-01T23:59:59.000Z

124

Deploying  

NLE Websites -- All DOE Office Websites (Extended Search)

and a Topology Service (TS), but those systems overlap significantly in some cases. The query syntax of the two is essentially the same, and the infrastructure used to support...

125

FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACT SHEET: Energy Department Actions to Deploy Combined Heat and FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency October 21, 2013 - 11:30am Addthis News Media Contact (202) 586-4940 Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking action to develop the next generation of combined heat and power (CHP) technology and help local communities and businesses make cost-effective investments that save money and energy. As part of this effort, the Department launched today seven new regional Combined Heat and Power Technical Assistance Partnerships across the country to help strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce

126

FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACT SHEET: Energy Department Actions to Deploy Combined Heat and FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency FACT SHEET: Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency October 21, 2013 - 11:30am Addthis News Media Contact (202) 586-4940 Underscoring President Obama's Climate Action Plan to cut harmful emissions and double energy efficiency, the Energy Department is taking action to develop the next generation of combined heat and power (CHP) technology and help local communities and businesses make cost-effective investments that save money and energy. As part of this effort, the Department launched today seven new regional Combined Heat and Power Technical Assistance Partnerships across the country to help strengthen U.S. manufacturing competitiveness, lower energy consumption and reduce

127

AMF Deployment, Steamboat Springs, Colorado  

NLE Websites -- All DOE Office Websites (Extended Search)

Colorado Colorado Steamboat Deployment AMF Home Steamboat Springs Home Storm Peak Lab Data Plots and Baseline Instruments Data Sets Experiment Planning STORMVEX Proposal Abstract and Related Campaigns Science Plan NWS Forecasting Plots STORMVEX Website Outreach STORMVEX Backgrounder (PDF, 1.6MB) News AMF2 STORMVEX Blog Images Contacts Gerald Mace AMF Deployment, Steamboat Springs, Colorado This view shows the instrument locations for the STORMVEX campaign. At the westernmost site is the Valley Floor. Heading east up the mountain is Christy Peak, Thunderhead, and Storm Peak Laboratory at the far east. Valley Floor: 40° 39' 43.92" N, 106° 49' 0.84" W Thunderhead: 40° 39' 15.12" N, 106° 46' 23.16" W Storm Peak: 40° 27' 18.36" N, 106° 44' 40.20" W

128

Rapidly deployable emergency communication system  

DOE Patents (OSTI)

A highly versatile, highly portable emergency communication system which permits deployment in a very short time to cover both wide areas and distant isolated areas depending upon mission requirements. The system employs a plurality of lightweight, fully self-contained repeaters which are deployed within the mission area to provide communication between field teams, and between each field team and a mobile communication control center. Each repeater contains a microcomputer controller, the program for which may be changed from the control center by the transmission of digital data within the audible range (300-3,000 Hz). Repeaters are accessed by portable/mobile transceivers, other repeaters, and the control center through the transmission and recognition of digital data code words in the subaudible range.

Gladden, Charles A. (Las Vegas, NV); Parelman, Martin H. (Las Vegas, NV)

1979-01-01T23:59:59.000Z

129

Nuclear Deployment Scorecards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Initiatives » Nuclear Reactor Technologies » Nuclear Deployment Initiatives » Nuclear Reactor Technologies » Nuclear Deployment Scorecards Nuclear Deployment Scorecards October 31, 2013 Quarterly Nuclear Deployment Scorecard - October 2013 The scorecard includes news updates, regulatory status, reactor design certification, early site permits, new plant construction progress, and expected operation dates. August 8, 2013 Quarterly Nuclear Deployment Scorecard - July 2013 The scorecard includes news updates, regulatory status, reactor design certification, early site permits, new plant construction progress, and expected operation dates. May 1, 2013 Quarterly Nuclear Power Deployment Scorecard - April 2013 The scorecard includes news updates, regulatory status, reactor design certification, early site permits, and new plant construction progress.

130

NREL: Technology Deployment - Solar Decathlon  

NLE Websites -- All DOE Office Websites (Extended Search)

Decathlon Decathlon Photo of a woman assembling the Team Alberta solar-powered house at the Solar Decathlon, with the U.S. Capitol Building in the background. Solar Decathlon is an international competition that challenges collegiate teams to design, build, and operate solar-powered houses that are cost-effective, energy-efficient, and attractive. NREL has provided technical expertise for this U.S. Department of Energy (DOE) event since its conception in 1999. Considered one of DOE's most successful efforts, the Solar Decathlon helps remove multiple barriers to the adoption of solar energy technologies by: Educating students and the public about the money-saving opportunities and environmental benefits presented by clean-energy products and design solutions Demonstrating to the public the comfort and affordability of homes

131

NETL: Carbon Storage - Regulatory  

NLE Websites -- All DOE Office Websites (Extended Search)

GHG emissions reductions while preserving the option of using abundant domestic fossil energy resources. However, widespread, cost effective deployment of CCS will occur only if...

132

Federal policies to promote the widespread utilization of photovoltaic systems. Supplement: review and critique  

DOE Green Energy (OSTI)

This document is intended as a supplement to the two-volume report entitled Federal Policies to Promote the Widespread Utilization of Photovoltaic Systems that was submitted to Congress by the Department of Energy in February and April of 1980. This supplement contains review comments prepared by knowledgeable experts who reviewed early drafts of the Congressional report. Responses to the review comments by the Jet Propulsion Laboratory, preparer of the Congressional report, are also included in this supplement. The Congressional report, mandated in the Solar Photovoltaic Energy Research, Development, and Demonstration Act of 1978 (P.L. 95-590), discusses various issues related to promoting the deployment of photovoltaic systems through the Federal Photovoltaic Program. Various program strategies and funding levels are examined.

Smith, J.L.

1980-04-15T23:59:59.000Z

133

Federal Energy Management Program: Technology Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

& Initiatives Solid State Lighting Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Technology Deployment NEW Technology...

134

Real-Time Deployment of Mesh Networks  

Science Conference Proceedings (OSTI)

... Related Efforts. DARPA LANdroids program. Publications. MR Souryal, A. Wapf, N. Moayeri, Rapidly-Deployable Mesh Network Testbed; ...

2013-07-08T23:59:59.000Z

135

Disposable telemetry cable deployment system  

DOE Patents (OSTI)

A disposable telemetry cable deployment system for facilitating information retrieval while drilling a well includes a cable spool adapted for insertion into a drill string and an unarmored fiber optic cable spooled onto the spool cable and having a downhole end and a stinger end. Connected to the cable spool is a rigid stinger which extends through a kelly of the drilling apparatus. A data transmission device for transmitting data to a data acquisition system is disposed either within or on the upper end of the rigid stinger.

Holcomb, David Joseph (Sandia Park, NM)

2000-01-01T23:59:59.000Z

136

Development of design & technology package for cost effective housing in Gujrat  

E-Print Network (OSTI)

Purpose: Improve quality of life in rural areas through intervention of infrastructure and housing improvement. Provide methods of building better and cost-effective houses at a quicker pace. Devise strategies of withdrawing ...

Chaudhry, Rajive

1996-01-01T23:59:59.000Z

137

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

138

Buildings Technologies Deployment | Clean energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Technologies Deployment Building Technologies Deployment SHARE Building Technologies Deployment benchmarking commercial buildings Once building technologies emerge and become commercially available, only in exceptional cases does robust market uptake automatically follow. Additional efforts remain to ensure that emerging and under-utilized technologies are successfully deployed to the fullest extent possible. ORNL helps optimize the energy performance of buildings and industrial processes by moving technologies to full use in residential, commercial, and industrial sectors through applications research, technical assistance, and a variety of deployment strategies. The team's comprehensive knowledge of buildings and energy use spans multi-building sites, whole-buildings, systems, components, and multi-level

139

AvAilAble for licensing Higher-performance, more cost-effective batteries for PHEVs and HEVs.  

E-Print Network (OSTI)

AvAilAble for licensing Higher-performance, more cost-effective batteries for PHEVs and HEVs. Benefits Higher-performance, more cost-effective batteries for PHEVs and HEVs. Reduced costs by lowering cost is easier, faster, and more cost-effective. Electrode Materials for Rechargeable Li-ion Batteries

Kemner, Ken

140

NREL: Technology Deployment Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Decathlon 2013 Heading to California Solar Decathlon 2013 Heading to California U.S. Coast Guard Saves Energy, Money Training Results in Decreased Energy Use and Costs for Sector Guam Standard Work Specifications Tool Now Available Standard Work Specifications Tool Now Available Weatherization industry can save specifications online and streamline work NREL Federal Fueling Station Data Supports Sandy Recovery NREL Federal Fueling Station Data Supports Sandy Recovery Decision Makers Able to Coordinate Access to Fuel NREL works with federal, state, and local government and private industry and organizations to deploy commercially available energy efficiency and renewable energy technologies. Our experts help prepare the market for emerging technologies by removing barriers to adoption. Use our technology

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

ECOdriving - Widespread Implementation for Learner Drivers and Licensed  

Open Energy Info (EERE)

ECOdriving - Widespread Implementation for Learner Drivers and Licensed ECOdriving - Widespread Implementation for Learner Drivers and Licensed Drivers (ECOWILL) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: ECOdriving - Widespread Implementation for Learner Drivers and Licensed Drivers (ECOWILL) Agency/Company /Organization: Austrian Energy Agency Focus Area: Fuels & Efficiency Topics: Best Practices Website: www.ecodrive.org/ The ECOWILL project aims to reduce carbon emissions by up to 8 Mt until 2015 by boosting the application of eco-driving across Europe. The project will roll out training programs for licensed drivers in 13 European countries. ECOWILL also promotes the education of eco-driving for learner drivers. This website provides information about eco-driving, including country-specific activities.

142

Estimating the environmental and economic effects of widespread residential PV adoption using GIS and NEMS  

Science Conference Proceedings (OSTI)

This paper describes a study of the national effects of widespread adoption of grid-connected residential rooftop photovoltaic (PV) systems. A Geographic Information System (GIS) model is used to estimate potential PV system adoption and PV electricity generation and the National Energy Modeling System (NEMS) is used to estimate the national effects of PV electricity generation. Adoption is assumed to occur if levelized PV system cost is less than the local average retail electricity rate at the country level. An estimate of the current {open_quotes}best{close_quotes} scenario (defined by a 6.5% real interest rate, 30-year loan life, $6{sub 1994}/W system cost, and $4{sub 1994}/month voluntary premium) results in no adoption. Several scenarios designed to stimulate PV adoption are modeled. As an example, if PV system costs are instead assumed to be $3{sub 1994}/W, rooftop systems are found to be cost effective in 16% of detached single-family households in the U.S. by 2015 (assuming full adoption of 4-kW systems), this results in 82.1 TWh of annual PV electricity generation, 170 TWh of avoided electricity transmission, distribution, and generation losses, 6 Mt/a of avoided carbon emissions, 50 kt/a of avoided NOx emissions, and 27.3 GW of avoided electricity generating capacity in place.

Marnay, C.; Richey, R.C.; Mahler, S.A. [and others

1997-10-01T23:59:59.000Z

143

The accelerated site technology deployment program presents the segmented gate system  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) is working to accelerate the acceptance and application of innovative technologies that improve the way the nation manages its environmental remediation problems. The DOE Office of Science and Technology established the Accelerated Site Technology Deployment Program (ASTD) to help accelerate the acceptance and implementation of new and innovative soil and ground water remediation technologies. Coordinated by the Department of Energy's Idaho Office, the ASTD Program reduces many of the classic barriers to the deployment of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. The paper uses the example of the Segmented Gate System (SGS) to illustrate how the ASTD program works. The SGS was used to cost effectively separate clean and contaminated soil for four different radionuclides: plutonium, uranium, thorium, and cesium. Based on those results, it has been proposed to use the SGS at seven other DOE sites across the country.

PATTESON,RAYMOND; MAYNOR,DOUG; CALLAN,CONNIE

2000-02-24T23:59:59.000Z

144

Community Renewable Energy Deployment: Sacramento Municipal Utility  

Open Energy Info (EERE)

Deployment: Sacramento Municipal Utility Deployment: Sacramento Municipal Utility District Projects Jump to: navigation, search Name Community Renewable Energy Deployment: Sacramento Municipal Utility District Projects Agency/Company /Organization US Department of Energy Focus Area Agriculture, Economic Development, Greenhouse Gas, Renewable Energy, Biomass - Anaerobic Digestion, Solar - Concentrating Solar Power, Solar, - Solar Pv, Biomass - Waste To Energy Phase Bring the Right People Together, Develop Finance and Implement Projects Resource Type Case studies/examples Availability Publicly available--Free Publication Date 2/2/2011 Website http://www1.eere.energy.gov/co Locality Sacramento Municipal Utility District, CA References Community Renewable Energy Deployment: Sacramento Municipal Utility District Projects[1]

145

Technology Deployment List | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Technology Deployment List Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Technology Deployment List Agency/Company /Organization: Federal Energy Management Program Sector: Energy Focus Area: Renewable Energy Phase: Create a Vision Topics: Implementation User Interface: Website Website: www1.eere.energy.gov/femp/technologies/newtechnologies_matrix.html#cat OpenEI Keyword(s): EERE tool, Technology Deployment List Language: English References: Technology Deployment List[1] Identify emerging-and underused-energy-saving technologies, including building envelope; heating, ventilation, and air conditioning; lighting; water heating; and refrigeration, computer power management, and vending

146

Integrated assessment of dispersed energy resources deployment  

E-Print Network (OSTI)

54 Table 5: Summary of Net MeteringDER Deployment Table 5: Summary of Net Metering Laws Summaryof State Net Metering Programs ( Current) Limit Limit on

Marnay, Chris; Blanco, Raquel; Hamachi, Kristina S.; Kawaan, Cornelia P.; Osborn, Julie G.; Rubio, F. Javier

2000-01-01T23:59:59.000Z

147

Estimating IPv6 & DNSSEC Deployment Status  

Science Conference Proceedings (OSTI)

Estimating IPv6 & DNSSEC External Service Deployment Status Background and Methodology. ... gov.two. Agency Two, (errors & islands). gov.three. ...

2013-11-07T23:59:59.000Z

148

Federal Energy Management Program: Federal Technology Deployment...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Initiatives Solid State Lighting Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Federal Technology Deployment Working Group Energy...

149

NREL: Technology Deployment - Climate Action Planning Tool -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment - Climate Action Planning Tool Step 1 of 4 Step 1: Gather Baseline Energy Consumption Data Download the sample data sheet below, gather your numbers, and...

150

Energy Department Invests Over $7 Million to Commercialize Cost-Effective  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Invests Over $7 Million to Commercialize Invests Over $7 Million to Commercialize Cost-Effective Hydrogen and Fuel Cell Technologies Energy Department Invests Over $7 Million to Commercialize Cost-Effective Hydrogen and Fuel Cell Technologies December 17, 2013 - 12:12pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON -- As part of the Obama Administration's all-of-the-above energy strategy, the Energy Department today announced more than $7 million for projects that will help bring cost-effective, advanced hydrogen and fuel cell technologies online faster. This investment - across four projects in Georgia, Kansas, Pennsylvania and Tennessee - will increase U.S. leadership in fuel cell-powered vehicles and backup power systems, and give businesses more affordable, cleaner transportation and power options.

151

DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Site Cost-Effectively Eliminates 200 Million Gallons of Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water DOE Moab Site Cost-Effectively Eliminates 200 Million Gallons of Contaminated Ground Water July 29, 2013 - 12:00pm Addthis View of the evaporation pond (right center) on the tailings pile with the forced-air evaporators running. The extraction wells are between the pile and the Colorado River, which can be seen in the lower left. View of the evaporation pond (right center) on the tailings pile with the forced-air evaporators running. The extraction wells are between the pile and the Colorado River, which can be seen in the lower left. Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov (970) 257-2115 Wendee Ryan, wryan@gjemtac.doe.gov (970) 257-2145 Grand Junction, CO - The Department of Energy (DOE) announced today that

152

Energy Department Invests Over $7 Million to Commercialize Cost-Effective  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Invests Over $7 Million to Commercialize Invests Over $7 Million to Commercialize Cost-Effective Hydrogen and Fuel Cell Technologies Energy Department Invests Over $7 Million to Commercialize Cost-Effective Hydrogen and Fuel Cell Technologies December 17, 2013 - 12:12pm Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON -- As part of the Obama Administration's all-of-the-above energy strategy, the Energy Department today announced more than $7 million for projects that will help bring cost-effective, advanced hydrogen and fuel cell technologies online faster. This investment - across four projects in Georgia, Kansas, Pennsylvania and Tennessee - will increase U.S. leadership in fuel cell-powered vehicles and backup power systems, and give businesses more affordable, cleaner transportation and power options.

153

SADmote: a robust and cost-effective device for environmental monitoring  

Science Conference Proceedings (OSTI)

Time to deployment for wireless sensor networks could be reduced by using commercial sensor nodes. However, this may lead to suboptimal flexibility, power consumption and cost of the system. Our pilot deployment for precision agriculture and fruit growing ... Keywords: environmental monitoring, hardware design, precision agriculture, sensor networks

Atis Elsts; Rihards Balass; Janis Judvaitis; Reinholds Zviedris; Girts Strazdins; Artis Mednis; Leo Selavo

2012-02-01T23:59:59.000Z

154

Relay placement problem in smart grid deployment  

Science Conference Proceedings (OSTI)

In this paper, we give an overview of power grid, smart grid, Advanced Metering Infrastructure (AMI), and the deployment cost analysis step by step. The importance between Relay Placement Problem (RPP) and the deployment cost in an AMI system is highlighted. ...

Wei-Lun Wang; Quincy Wu

2010-10-01T23:59:59.000Z

155

Estimate of Cost-Effective Potential for Minimum Efficiency Performance Standards in 13 Major World Economies Energy Savings, Environmental and Financial Impacts  

E-Print Network (OSTI)

G. , 2002. A life-cycle cost analysis for setting energyM. , Nicholas Bojda, 2012b. Cost Effectiveness of High-31 Summary of Cost Effective

Letschert, Virginie E.

2013-01-01T23:59:59.000Z

156

ANALYSIS OF THE PERFORMANCE AND COST EFFECTIVENESS OF NINE SMALL WIND ENERGY CONVERSION SYSTEMS FUNDED BY THE DOE SMALL GRANTS PROGRAM  

E-Print Network (OSTI)

AND COST EFFECTIVENESS OF NINE SMALL WIND ENERGY CONVERSIONAND COST EFFECTIVENESS OF NINE SMALL WIND ENERGY CONVERSIONscale wind energy commer- is high capital costs per unit of

Kay, J.

2009-01-01T23:59:59.000Z

157

Sandia National Laboratories: Research: Facilities: Technology Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment Centers Technology Deployment Centers CRF Many of Sandia's unique research centers are available for use by U.S. industry, universities, academia, other laboratories, state and local governments, and the scientific community in general. Technology deployment centers are a unique set of scientific research capabilities and resources. The primary function of technology deployment centers is to satisfy Department of Energy programmatic needs, while remaining accessible to outside users. Contact For more information about Sandia technology deployment centers or for help in selecting a center to meet your needs, contact Mary Monson at mamonso@sandia.gov, (505) 844-3289. Advanced Power Sources Laboratory Combustion Research Facility Design, Evaluation, and Test Technology Facility

158

Cost Effectiveness of On-Site Chlorine Generation for Chlorine Truck Attack Prevention  

Science Conference Proceedings (OSTI)

A chlorine tank truck attack could cause thousands of fatalities. As a means of preventing chlorine truck attacks, I consider the on-site generation of chlorine or hypochlorite at all U.S. facilities currently receiving chlorine by truck. I develop and ... Keywords: applications, cost-effectiveness, public policy, risk analysis, terrorism, uncertainty

Anthony M. Barrett

2010-12-01T23:59:59.000Z

159

On Test Suite Composition and Cost-Effective Regression Testing. Gregg Rothermel  

E-Print Network (OSTI)

On Test Suite Composition and Cost-Effective Regression Testing. Gregg Rothermel , Sebastian Elbaum}@cse.unl.edu August 30, 2003 Abstract Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost

Rothermel, Gregg

160

On Test Suite Composition and Cost-Effective Regression Testing Gregg Rothermel  

E-Print Network (OSTI)

On Test Suite Composition and Cost-Effective Regression Testing Gregg Rothermel , Sebastian Elbaum}@cse.unl.edu August 31, 2004 Abstract Regression testing is an expensive testing process used to re-validate software as it evolves. Various methodologies for improving regression testing processes have been explored, but the cost

Rothermel, Gregg

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Carbon 40 (2002) 18631872 Adsorption on carbonaceous surfaces: cost-effective  

E-Print Network (OSTI)

Carbon 40 (2002) 1863­1872 Adsorption on carbonaceous surfaces: cost-effective computational levels of theory. The carbonaceous surface is modeled by a graphene layer that has unsaturated carbon sites of a carbonized material. We emphasized the model performance in predicting geometrical parameters

Truong, Thanh N.

162

Early, Cost-Effective Applications of Photovoltaics in the Electric Utility Industry  

Science Conference Proceedings (OSTI)

Photovoltaic (PV)-powered systems can compete economically with conventional utility approaches such as distribution line extensions and step-down transformer installation for powering small electric loads. This study identified more than 60 cost-effective applications of PV-powered systems for utilities and their customers.

1994-01-01T23:59:59.000Z

163

Photovoltaics for municipal planners. Cost-effective municipal applications of photovoltaics for electric power  

DOE Green Energy (OSTI)

This booklet is intended for city and county government personnel, as well as community organizations, who deal with supplying, regulating, or recommending electric power resources. Specifically, this document deals with photovoltaic (PV) power, or power from solar cells, which is currently the most cost-effective energy source for electricity requirements that are relatively small, located in isolated areas, or difficult to serve with conventional technology. Recently, PV has been documented to be more cost-effective than conventional alternatives (such as line extensions or engine generators) in dozens of applications within the service territories of electric, gas, and communications utilities. Here, we document numerous cost-effective urban applications, chosen by planners and utilities because they were the most cost-effective option or because they were appropriate for environmental or logistical reasons. These applications occur within various municipal departments, including utility, parks and recreation, traffic engineering, transportation, and planning, and they include lighting applications, communications equipment, corrosion protection, irrigation control equipment, remote monitoring, and even portable power supplies for emergency situations.

Not Available

1993-04-01T23:59:59.000Z

164

Robust and Cost-Effective Architecture Design for Smart Grid Communications: A Multi-stage  

E-Print Network (OSTI)

Robust and Cost-Effective Architecture Design for Smart Grid Communications: A Multi.zhang}@asu.edu Abstract--Wide-area monitoring, protection and control (WAMPAC) plays a critical role in smart grid for smart grid. To this end, we consider a middleware approach to leverage the existing commercial

Reisslein, Martin

165

Pacific Northwest Laboratory environmental technologies available for deployment  

SciTech Connect

The Department of Energy created the Office of Environmental Management (EM) to conduct a 30-year plus, multi-billion dollar program to manage the wastes and cleanup the legacy from over fifty years of nuclear material production. Across the DOE System there are thousands of sites containing millions of metric tons of buried wastes and contaminated soils and groundwater. Additionally, there are nearly 400,000 m{sup 3} of highly radioactive wastes in underground storage tanks, over 1,400 different mixed-waste streams, and thousands of contaminated surplus facilities, some exceeding 200,000 m{sup 2} in size. Costs to remediate all these problems have been estimated to be as much as several hundred billion dollars. The tremendous technical challenges with some of the problems and the high costs of using existing technologies has led the Department to create the Office of Technology Development (TD) to lead an aggressive, integrated national program to develop and deploy the needed advanced, cost-effective technologies. This program is developing technologies for all major cleanup steps: assessment, characterization, retrieval, treatment, final stabilization, and disposal. Work is focused on the Department`s five major problem areas: High-Level Waste Tank Remediation; Contaminant Plume Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; Contaminated Soils and Buried Wastes Facility Transitioning, Decommissioning, and Final Disposal.

Slate, S.C.

1994-07-01T23:59:59.000Z

166

Cost-effectiveness of freeway median high occupancy vehicle (HOV) facility conversion to rail guideway transit  

E-Print Network (OSTI)

Many freeways in the United States contain median high occupancy vehicle (HOV) facilities. These facilities have been envisioned by some as reserved space for future rail guideway transit. This thesis examines the cost-effectiveness of converting a freeway median HOV lane into a guideway transit line. A full-cost model was developed to determine the cost effectiveness of converting an HOV lane into a rail transit line. The measure of cost-effectiveness used was the benefit-to-cost ratio. The full-cost model contained two cost categories (capital and operating costs) and two benefit categories (travel time and externality benefits). This fullcost model was adopted to conditions on the Katy Freeway in Houston Texas which served as a case study for this thesis. It was found that 29 percent of the person-miles of travel on the Katy Freeway under given conditions must utilize guideway transit for conversion to be cost-effective. It was also found that the model is sensitive to assumptions of the value of time, project soft costs (administrative, planning, and design costs) and the operating cost of the rail transit system. The model is also sensitive to assumptions regarding latent demand. It was concluded that conversion to rail guideway transit in the case study example is not cost-effective. It was reconunended that further investigation be taken into full-cost model components to allow more certain estimates of cost components. Also recommended was further consideration of the effects of latent demand on HOV to rail guideway transit conversions.

Best, Matthew Evans

1996-01-01T23:59:59.000Z

167

Cost-effectiveness of Different Herbicide and Non-herbicide Alternatives for Treating Transmission Rights of Way Vegetation  

Science Conference Proceedings (OSTI)

This report is a guide to using cost-effectiveness analysis to compare different programs of vegetation management for electric transmission line rights of way.BackgroundCost effectiveness is an important economic measure for describing and comparing the relative acceptability of different vegetation management programs. Cost-effectiveness analysis is apparently rarely used in the utility industry. This might be related to its apparent complexity, but it can ...

2012-12-12T23:59:59.000Z

168

Evaluation of The Thermal Performance and Cost Effectiveness of Radiant Barrier Thermal Insulation Materials In Residential Construction.  

E-Print Network (OSTI)

??Reducing heating and cooling systems loads in buildings is a cost effective way to decrease energy consumption in residential houses. This reduction can be achieved (more)

Asadi, Somayeh

2012-01-01T23:59:59.000Z

169

ARM - News from the Steamboat Springs Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

ColoradoNews from the Steamboat Springs Deployment Steamboat Deployment AMF Home Steamboat Springs Home Storm Peak Lab Data Plots and Baseline Instruments Data Sets Experiment Planning STORMVEX Proposal Abstract and Related Campaigns Science Plan NWS Forecasting Plots STORMVEX Website Outreach STORMVEX Backgrounder (PDF, 1.6MB) News AMF2 STORMVEX Blog Images Contacts Gerald Mace News from the Steamboat Springs Deployment Releases WPSD (Paducah, KY) "STORMVEX Cloud Study" January 19, 2011 The Daily Sentinel, Grand Junction "Steamboat project gives scientists unique, grounded look at clouds" December 12, 2010 Steamboat Pilot & Today "Steamboat cloud study to help create better global climate models" Image Gallery December 12, 2010 Also picked up by:

170

Property:DeploymentPrograms | Open Energy Information  

Open Energy Info (EERE)

DeploymentPrograms DeploymentPrograms Jump to: navigation, search Property Name DeploymentPrograms Property Type String Description Depolyment programs as listed in cleanenergysolutions.org Allows the following values: Audit Programs Demonstration & Implementation Green Power/Voluntary RE Purchase High Performance Buildings Industry Codes & Standards Project Development Public Tenders, Procurement, & Lead Examples Public-Private Partnerships Retrofits Ride Share, Bike Share, etc. Technical Assistance Training & Education Voluntary Appliance & Equipment Labeling Voluntary Industry Agreements Subproperties This property has the following 2 subproperties: G Greenhouse Gas Regional Inventory Protocol (GRIP) Website M Methods for Climate Change Technology Transfer Needs Assessments and

171

Building Diagnostic Market Deployment - Final Report  

Science Conference Proceedings (OSTI)

Operational faults are pervasive across the commercial buildings sector, wasting energy and increasing energy costs by up to about 30% (Mills 2009, Liu et al. 2003, Claridge et al. 2000, Katipamula and Brambley 2008, and Brambley and Katipamula 2009). Automated fault detection and diagnostic (AFDD) tools provide capabilities essential for detecting and correcting these problems and eliminating the associated energy waste and costs. The U.S. Department of Energy's (DOE) Building Technology Program (BTP) has previously invested in developing and testing of such diagnostic tools for whole-building (and major system) energy use, air handlers, chillers, cooling towers, chilled-water distribution systems, and boilers. These diagnostic processes can be used to make the commercial buildings more energy efficient. The work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy's Pacific Northwest National Laboratory (PNNL) and KGS Building LLC (KGS). PNNL and KGS both believe that the widespread adoption of AFDD tools will result in significant reduction to energy and peak energy consumption. The report provides an introduction and summary of the various tasks performed under the CRADA. The CRADA project had three major focus areas: (1) Technical Assistance for Whole Building Energy Diagnostician (WBE) Commercialization, (2) Market Transfer of the Outdoor Air/Economizer Diagnostician (OAE), and (3) Development and Deployment of Automated Diagnostics to Improve Large Commercial Building Operations. PNNL has previously developed two diagnostic tools: (1) whole building energy (WBE) diagnostician and (2) outdoor air/economizer (OAE) diagnostician. WBE diagnostician is currently licensed non-exclusively to one company. As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite, Clockworks. PNNL also provided validation data sets and the WBE software tool to validate the KGS implementation. OAE diagnostician automatically detects and diagnoses problems with outdoor air ventilation and economizer operation for air handling units (AHUs) in commercial buildings using data available from building automation systems (BASs). As part of this CRADA, PNNL developed implementation documentation and provided technical support to KGS to implement the tool into their software suite. PNNL also provided validation data sets and the OAE software tool to validate the KGS implementation. Finally, as part of this CRADA project, PNNL developed new processes to automate parts of the re-tuning process and transfer those process to KGS for integration into their software product. The transfer of DOE-funded technologies will transform the commercial buildings sector by making buildings more energy efficient and also reducing the carbon footprint from the buildings. As part of the CRADA with PNNL, KGS implemented the whole building energy diagnostician, a portion of outdoor air economizer diagnostician and a number of measures that automate the identification of re-tuning measures.

Katipamula, S.; Gayeski, N.

2012-04-30T23:59:59.000Z

172

NREL: Technology Deployment - Alternative Fuels Data Center  

NLE Websites -- All DOE Office Websites (Extended Search)

Alternative Fuels Data Center Alternative Fuels Data Center NREL developed and manages the Alternative Fuels Data Center (AFDC), the U.S. Department of Energy's comprehensive clearinghouse of information and data related to the deployment of alternative fuels, advanced vehicles, and energy efficiency in transportation for fleets, fuel providers, policymakers, and other stakeholders working to reduce petroleum use in transportation. Interactive Transportation Deployment Tools NREL's large suite of free online tools assist fleets and drivers in selecting and deploying the technologies and strategies that will best help them meet their environmental and energy goals. Fleets and drivers can use calculators, interactive maps, and data searches to evaluate, select, and deploy alternative fuels and advanced vehicles as

173

A Strategic Framework for SMR Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Strategic Framework for SMR Deployment February 24, 2012 Introduction A strategy for the successful deployment of small modular reactors (SMRs) must consider what the goals of deployment would entail, the challenges to achieving these goals and the approach to overcome those challenges. This paper will attempt to offer a framework for addressing these important issues at the outset of the program. The deployment of SMRs will be realized by private power companies making the decision to purchase and operate SMRs from private vendors. The government role is to set national priorities for clean energy and national security and create incentives to achieve them. The policy tools the government may choose to use to advance this technology in support of these national objectives will evolve as SMRs advance

174

Tradeable CO sub 2 emission permits for cost-effective control of global warming  

SciTech Connect

Many current global warming mitigation policy proposals call for large, near-term reductions in CO{sub 2} emissions, thereby entailing high initial carbon emission tax rates or permit prices. This paper claims that these high initial tax rates or permit prices are not cost-effective in achieving the desired degree of climate change control. A cost-effective permit system is proposed and described that, under certain assumptions, would allow markets to optimally lead permit prices along a gradually increasing trajectory over tie. This price path presents the Hotelling result and would ease the abrupt, inefficient, and costly adjustments imposed on the fossil fuel and other industries in current proposals. This finding is demonstrated using the Argonne Model, a linear programming energy- environmental-economic model that allows for intertemporal optimization of consumer energy well-being. 12 refs., 3 figs., 1 tab.

Kosobud, R.F.; South, D.W.; Daly, T.A.; Quinn, K.G.

1991-01-01T23:59:59.000Z

175

Commercial Standard 90.1 Cost-Effectiveness Analysis and Results | Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Map Printable Version Development Adoption Compliance Regulations Resource Center Commercial Standard 90.1 Cost-Effectiveness Analysis and Results The U.S. Department of Energy (DOE) supports the development of cost-effective energy codes and standards to increase efficiency in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL) conducted a series of cost analyses for ANSI/ASHRAE/IES Standard 90.1: Energy Standard for Buildings Except Low-Rise Residential Buildings - the commercial model energy code. The cost analyses compare Standard 90.1-2010 to the prior 2007 edition, based on six prototype buildings in five representative U.S. climate zones. PNNL also conducted energy savings analysis for Standard 90.1-2010 and the commercial requirements of the

176

Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

267 267 June 2010 Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative S. Busche and S. Hockett National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-7A2-48267 June 2010 Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative S. Busche and S. Hockett Prepared under Task No. IDHW9170 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

177

Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative  

NLE Websites -- All DOE Office Websites (Extended Search)

8267 8267 June 2010 Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative S. Busche and S. Hockett National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Operated by the Alliance for Sustainable Energy, LLC Contract No. DE-AC36-08-GO28308 Technical Report NREL/TP-7A2-48267 June 2010 Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative S. Busche and S. Hockett Prepared under Task No. IDHW9170 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government.

178

Cost-Effectiveness Analysis of the 2009 and 2012 IECC Residential Provisions -- Technical Support Document  

NLE Websites -- All DOE Office Websites (Extended Search)

2068 2068 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Cost-Effectiveness Analysis of the 2009 and 2012 IECC Residential Provisions - Technical Support Document V Mendon R Lucas S Goel April 2013 PNNL-22068 Cost-Effectiveness Analysis of the 2009 and 2012 IECC Residential Provisions - Technical Support Document V Mendon R Lucas S Goel April 2013 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 iii Executive Summary This analysis was conducted by Pacific Northwest National Laboratory (PNNL) in support of the U.S. Department of Energy's (DOE) Building Energy Codes Program (BECP). DOE supports the

179

Advanced Insulation for High Performance Cost-effective Wall, Roof, and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced Insulation for High Performance Advanced Insulation for High Performance Cost-effective Wall, Roof, and Foundation Systems Research Project Advanced Insulation for High Performance Cost-effective Wall, Roof, and Foundation Systems Research Project The U.S. Department of Energy (DOE) is currently conducting research into advanced insulation for high performance wall, roof, and foundation systems. Heat flows from hotter to colder spaces, and insulation is designed to resist this flow by keeping hot air out in the summer and in during the winter. Project Description This project seeks to develop high performing, durable, hydrofluorocarbon and hydrochlorofluorocarbons -free insulation with an R-value greater than 7.5-per-inch and a Class A fire performance. Project Partners Research is being undertaken between DOE and Dow Chemical.

180

Cost effectiveness of park-and-ride lots in the Puget Sound region area. Final report  

SciTech Connect

A cost-effectiveness evaluation and a cost-benefit analysis was performed on a park-and-ride system consisting of 26 park-and-ride lots in the Seattle metropolitan area. Costs and benefits of the system were examined with respect to the user, the community at large, and the public agencies responsible for providing for the community's transportation needs. Using survey and other data as input, a model was developed to calculate the total incurred trip costs of both the park-and-ride trip and the corresponding trip not involving the park-and-ride lot. General results indicated that the park-and-ride system in the Seattle area is cost effective.

Rutherford, G.S.; Wellander, C.A.

1986-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Identifying Cost-Effective Residential Energy Efficiency Opportunities for the Kauai Island Utility Cooperative  

Science Conference Proceedings (OSTI)

This analysis is an update to the 2005 Energy Efficiency Potential Study completed by KEMA for the Kauai Island Utility Cooperative (KIUC) and identifies potential energy efficiency opportunities in the residential sector on Kauai (KEMA 2005). The Total Resource Cost (TRC) test is used to determine which of the energy efficiency measures analyzed in the KEMA report are cost effective for KIUC to include in a residential energy efficiency program. This report finds that there remains potential energy efficiency savings that could be cost-effectively incentivized through a utility residential demand-side management program on Kauai if implemented in such a way that the program costs per measure are consistent with the current residential program costs.

Busche, S.; Hockett, S.

2010-06-01T23:59:59.000Z

182

Interim Report: Coiled Tubing Drilling and Intervention System Using Cost Effective Vessel  

NLE Websites -- All DOE Office Websites (Extended Search)

DOCUMENT TITLE: DOCUMENT TITLE: Self Supporting Riser Technology to Enable Coiled Tubing Intervention for Deepwater Wells Document No.: 08121-1502-12 RPSEA PROJECT TITLE: Coil Tubing Drilling and Intervention System Using a Cost Effective Vessel RPSEA Project No.: 08121-1502 01 April 2011 Charles R. Yemington, PE Project Manager Nautilus International 400 North Sam Houston Parkway East, Suite 105 Houston, Texas 77060 RPSEA Project No.: 08121-1502 Coiled Tubing Drilling and Intervention System Using a Cost Effective Vessel RPSEA Project 08121-1502 01 April 2011 Page 2 of 91 LEGAL NOTICE This report was prepared by Nautilus International, LLC. as an account of work sponsored by the Research Partnership to Secure Energy for America (RPSEA). RPSEA members, the

183

Load-curve responsiveness to weather and the cost-effectiveness of conservation  

SciTech Connect

A cost-benefit analysis of home-weatherization projects using average incremental power costs instead of peak or off-peak costs shows that some programs are no longer cost-effective. Weatherization improves the energy efficiency of houses and reduces demand on the utility, but a study of how monthly load curves at a Pacific Northwest utility responded to weather over a 12-month period indicates that abnormal weather shifts the entire load curve. 1 figure. (DCK)

Hellman, M.M.

1982-09-30T23:59:59.000Z

184

Cost-effectiveness of multidisciplinary management of Tinnitus at a specialized Tinnitus centre  

E-Print Network (OSTI)

) will be quantified using the cost-effectiveness acceptability curve. Sensitivity analyses will be used to show the impact of variation in non-stochastic input parameters on the incremental cost- utility ratio, such as discount rate, unit prices, and design issues... using integral cost calcu- lations. Costs from productivity loss will be quantified using the friction cost method, as recommended in the Netherlands [28]. Ethical considerations Patients will be informed verbally and in written format about the research...

Cima, Rilana; Joore, Manuela; Maes, Iris; Scheyen, Dyon; El Refaie, Amr El; Baguley, David M; Vlaeyen, Johan W S; Anteunis, Lucien

2009-02-11T23:59:59.000Z

185

The Cost Effectiveness of Fracture Stimulation in Increasing the Flow from Geothermal Wells  

SciTech Connect

The cost effectiveness of fracture stimulation at The Geysers, the Imperial Valley, and other geothermal resource areas in the United States vas studied using GEOCOM, a computer code for analyzing the impact of completion activities on the life-cycle costs of geothermal wells. Technologies for fracturing the reservoir near the wellbore involve the creation of a pressure pulse in the wellbore by means of either hydraulic or explosive force. The cost of a single fracture stimulation job can vary from $50,000 to over $500,000, with a typical cost of around $300,000. The code shows that additional flow achieved by fracture stimulation must exceed 10,000 pounds per hour for each $100,000 invested in stimulation in order for a fracture treatment to be cost effective. In some reservoirs, this additional flow must be as great as 30,000 pounds per hour. The cost effectiveness of fracturing has not yet been demonstrated in the field. The Geothermal Well Stimulation Program achieved an overall average of about 10,000 pounds per hour for each $100,000 invested.

Brown, Gerald L.

1983-12-15T23:59:59.000Z

186

Cost effective analysis of recycled products for use in highway construction. Final report  

SciTech Connect

Over 4.5 billion of non-hazardous wastes are generated in the United States each year. Out of these wastes over 200 million tons of post consumer waste is generated. The disposal of post consumer waste is the responsibility of municipality and society. Four waste materials glass, plastic, rubber tires and paper and paperboard were selected for the detail study. A questionnaire survey was conducted for obtaining input from all state Department of Transportation (DOT) Recyclers and solid waste management facilities in the state of Ohio. Responses received from state DOT stated that they use various recycled materials in highway construction but do not conduct cost-effectiveness analysis of recycle waste materials. The cost of disposal of post consumer waste is increasing, which requires an alternate use for these waste materials. One possible use of these post consumer waste materials is in highway construction. An economic analysis is needed for their cost-effectiveness before using these materials in highway construction. Though these recycled waste materials are expensive compared to virgin material, consideration of the savings in terms of societal cost make these materials cost-effective and attractive to use in highway construction.

Gupta, J.D.

1998-04-01T23:59:59.000Z

187

Report on Synchrophasor Technologies and Their Deployment in...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report on Synchrophasor Technologies and Their Deployment in Recovery Act Projects Now Available Report on Synchrophasor Technologies and Their Deployment in Recovery Act Projects...

188

Large Monitoring Systems: Data Analysis, Design and Deployment  

E-Print Network (OSTI)

Data Analysis, Design and Deployment by Ram Rajagopal AData Analysis, Design and Deployment by Ram Rajagopal DoctorRam Rajagopal, titled Large Monitoring Systems: Data Analysis,

Rajagopal, Ram

2009-01-01T23:59:59.000Z

189

Good Practice Guide on Firewall Deployment for SCADA and Process...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks Good Practice Guide on Firewall Deployment for SCADA and Process Control Networks In recent years,...

190

Guidance for Deployment of Mobile Technologies for Nuclear Power...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers This...

191

Utility-Scale Smart Meter Deployments, Plans & Proposals | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans & Proposals Utility-Scale Smart Meter Deployments, Plans & Proposals The Edison Foundation's chart of plans and proposals for utility-scale smart meter deployments....

192

Energy Department Accelerates the Deployment of Advanced Vehicle...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Accelerates the Deployment of Advanced Vehicle Technologies with Private Industry Partnerships Energy Department Accelerates the Deployment of Advanced Vehicle Technologies with...

193

Synchrophasor Technologies and their Deployment in the Recovery...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid Programs (August 2013) Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid...

194

Energy Department Launches Public-Private Partnership to Deploy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Partnership to Deploy Hydrogen Infrastructure Energy Department Launches Public-Private Partnership to Deploy Hydrogen Infrastructure May 13, 2013 - 1:37pm Addthis News Media...

195

Discursive Deployments: Mobilizing Support for Municipal and Community Wireless Networks in the U.S.  

Science Conference Proceedings (OSTI)

This paper examines Municipal Wireless (MW) deployments in the United States. In particular, the interest is in understanding how discourse has worked to mobilize widespread support for MW networks. We explore how local governments discursively deploy the language of social movements to create a shared understanding of the networking needs of communities. Through the process of"framing" local governments assign meaning to the MW networks in ways intended to mobilize support anddemobilize opposition. The mobilizing potential of a frame varies and is dependent on its centrality and cultural resonance. We examine the framing efforts of MW networks by using a sample of Request for Proposals for community wireless networks, semi-structured interviews and local media sources. Prominent values that are central to a majority of the projects and others that are culturally specific are identified and analyzed for their mobilizing potency.

Alvarez, Rosio; Rodriguez, Juana Maria

2008-08-16T23:59:59.000Z

196

Development of Cost-Effective Low-Permeability Ceramic and Refractory Components for Aluminum Melting and Casting  

DOE Green Energy (OSTI)

A recent review by the U.S. Advanced Ceramics Association, the Aluminum Association, and the U.S. Department of Energy's Office of Industrial Technologies (DOE/OIT) described the status of advanced ceramics for aluminum processing, including monolithics, composites, and coatings. The report observed that monolithic ceramics (particularly oxides) have attractive properties such as resistance to heat, corrosion, thermal shock, abrasion, and erosion [1]. However, even after the developments of the past 25 years, there are two key barriers to commercialization: reliability and cost-effectiveness. Industry research is therefore focused on eliminating these barriers. Ceramic coatings have likewise undergone significant development and a variety of processes have been demonstrated for applying coatings to substrates. Some processes, such as thermal barrier coatings for gas turbine engines, exhibit sufficient reliability and service life for routine commercial use. Worldwide, aluminum melting and molten metal handling consumes about 506,000 tons of refractory materials annually. Refractory compositions for handling molten aluminum are generally based on dense fused cast silica or mullite. The microstructural texture is extremely important because an interlocking mass of coarser grains must be bonded together by smaller grains in order to achieve adequate strength. At the same time, well-distributed microscopic pores and cracks are needed to deflect cracks and prevent spalling and thermal shock damage [2]. The focus of this project was to develop and validate new classes of cost-effective, low-permeability ceramic and refractory components for handling molten aluminum in both smelting and casting environments. The primary goal was to develop improved coatings and functionally graded materials that will possess superior combinations of properties, including resistance to thermal shock, erosion, corrosion, and wetting. When these materials are successfully deployed in aluminum smelting and casting operations, their superior performance and durability will give end users marked improvements in uptime, defect reduction, scrap/rework costs, and overall energy savings resulting from higher productivity and yield. The implementation of results of this program will result in energy savings of 30 trillion Btu/year by 2020. For this Industrial Materials for the Future (IMF) project, riser tube used in the low-pressure die (LPD) casting of aluminum was selected as the refractory component for improvement. In this LPD process, a pressurized system is used to transport aluminum metal through refractory tubes (riser tubes) into wheel molds. It is important for the tubes to remain airtight because otherwise, the pressurized system will fail. Generally, defects such as porosity in the tube or cracks generated by reaction of the tube material with molten aluminum lead to tube failure, making the tube incapable of maintaining the pressure difference required for normal casting operation. Therefore, the primary objective of the project was to develop a riser tube that is not only resistant to thermal shock, erosion, corrosion, and wetting, but is also less permeable, so as to achieve longer service life. Currently, the dense-fused silica (DFS) riser tube supplied by Pyrotek lasts for only 7 days before undergoing failure. The following approach was employed to achieve the goal: (1) Develop materials and methods for sealing surface porosity in thermal-shock-resistant ceramic refractories; (2) Develop new ceramic coatings for extreme service in molten aluminum operations, with particular emphasis on coatings based on highly stable oxide phases; (3) Develop new monolithic refractories designed for lower-permeability applications using controlled porosity gradients and particle size distributions; (4) Optimize refractory formulations to minimize wetting by molten aluminum, and characterize erosion, corrosion, and spallation rates under realistic service conditions; and (5) Scale up the processing methods to full-sized components and perform field testi

Kadolkar, Puja [ORNL; Ott, Ronald D [ORNL

2006-02-01T23:59:59.000Z

197

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); Quarter 1 2012 Composite Data Products - Deployment (Presentation)  

SciTech Connect

This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). Quarter 1 2012 Composite Data Products - Deployment March 8, 2012.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

2012-06-01T23:59:59.000Z

198

Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA); November 2011 Composite Data Products - Deployment (Presentation)  

SciTech Connect

This presentation is about the Early Fuel Cell Market Deployments: ARRA and Combined (IAA, DLA, ARRA). November 2011 Composite Data Products - Deployment November 30, 2011.

Kurtz, J.; Wipke, K.; Sprik, S.; Ramsden, T.; Ainscough, C.

2012-06-01T23:59:59.000Z

199

NREL: Technology Deployment - State and Local Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Search More Search Options Site Map NREL helps states and local communities throughout the United States achieve their clean energy goals by supporting renewable energy and energy-saving projects through a variety of technical assistance and technology deployment programs. Analyze Energy Policy Impacts Analyze Energy Policy Impacts Find data to help your state, locality, or region establish beneficial clean energy policies. Learn more. Content on this page requires a newer version of Adobe Flash Player. Get Adobe Flash player. Technical Assistance Webcast Experts present information on state and local energy projects, financing, policy and more... Renewable Energy Data Book NREL's Cean Energy Policy Analyses Project State of the States 2010 The role of policy in clean energy market transformation

200

AMF Deployment, Niamey, Niger, West Africa  

NLE Websites -- All DOE Office Websites (Extended Search)

West Africa West Africa Niamey Deployment AMF Home Niamey Home Data Plots and Baseline Instruments RADAGAST Website Rainfall Record (PDF) Publications List, (PDF) Experiment Planning RADAGAST Proposal Outreach Fact Sheets RADAGAST (PDF) Annual Climate Cycle in Niger, Africa (PDF) Posters AMF Poster, French Version We're Going to Sample the Sky in Africa! News Campaign Images AMMA International News AMF Deployment, Niamey, Niger, West Africa In 2006, the ARM Mobile Facility is collecting cloud and atmospheric property measurements from a location near the airport in Niamey, Niger, West Africa. Main Site: 13° 28' 39.15" N, 2° 10' 27.62" E Altitude: 205 meters Ancillary Site: 13° 31' 19.14" N, 2° 37' 56.46" E Altitude: 228.29 meters In January 2006, the second deployment of the ARM Mobile Facility (AMF)

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

AMF Deployment, Point Reyes National Seashore, California  

NLE Websites -- All DOE Office Websites (Extended Search)

California California Point Reyes Deployment AMF Home Point Reyes Home Data Plots and Baseline Instruments Experiment Planning MASRAD Proposal Abstract and Related Campaigns Outreach Posters Climate Research at Point Reyes National Seashore (horizontal) Climate Research at Point Reyes National Seashore (vertical) News Campaign Images AMF Deployment, Point Reyes National Seashore, California Point Reyes National Seashore, on the California coast north of San Francisco. Shelters: 38° 5' 30.51" N, 122° 57' 19.90" W Instrument Field: 38° 5' 27.6" N, 122° 57' 25.80" W Altitude: 8 meters Point Reyes National Seashore, on the California coast north of San Francisco, was the location of the first deployment of the DOE's Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF). The ARM

202

Greensburg, Kansas, Deployment Project | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Greensburg, Kansas, Deployment Project Greensburg, Kansas, Deployment Project Greensburg, Kansas, Deployment Project November 13, 2013 - 10:40am Addthis The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) have helped Greensburg, Kansas, rebuild as a model green community. On May 4, 2007, a tornado destroyed or damaged 95% of the town's homes and businesses. Greensburg turned disaster into opportunity and created a plan to rebuild as a sustainable community with the help of a diverse group of experts, including DOE and NREL. To help make Greensburg's vision of rebuilding green a reality, DOE and NREL focused on the specific areas listed below. You can also read more in the fact sheet: A Tale of Two Cities: Greensburg Rebuilds as a National Model for Green Communities.

203

Electric Vehicle Charging Infrastructure Deployment Guidelines: British  

Open Energy Info (EERE)

Electric Vehicle Charging Infrastructure Deployment Guidelines: British Electric Vehicle Charging Infrastructure Deployment Guidelines: British Columbia Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Electric Vehicle Charging Infrastructure Deployment Guidelines: British Columbia Agency/Company /Organization: Natural Resources Canada, British Columbia Hydro and Power Authority Focus Area: Vehicles Topics: Best Practices Website: www.bchydro.com/etc/medialib/internet/documents/environment/EVcharging A major component of winning public acceptance for plug-in vehicles is the streamlining of the private electric vehicle charging or supply equipment permitting and installation process as well as the public and commercial availability of charging locations. These guidelines are intended to anticipate the questions and requirements to ensure customer satisfaction.

204

Regional Energy Deployment System (ReEDS)  

NLE Websites -- All DOE Office Websites (Extended Search)

Regional Energy Deployment Regional Energy Deployment System (ReEDS) Walter Short, Patrick Sullivan, Trieu Mai, Matthew Mowers, Caroline Uriarte, Nate Blair, Donna Heimiller, and Andrew Martinez Technical Report NREL/TP-6A20-46534 December 2011 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Regional Energy Deployment System (ReEDS) Walter Short, Patrick Sullivan, Trieu Mai, Matthew Mowers, Caroline Uriarte, Nate Blair, Donna Heimiller, and Andrew Martinez Prepared under Task Nos. DOCC.1014, SS10.2210,

205

Low-income DSM Programs: Methodological approach to determining the cost-effectiveness of coordinated partnerships  

SciTech Connect

As governments at all levels become increasingly budget-conscious, expenditures on low-income, demand-side management (DSM) programs are being evaluated more on the basis of efficiency at the expense of equity considerations. Budgetary pressures have also caused government agencies to emphasize resource leveraging and coordination with electric and gas utilities as a means of sharing the expenses of low-income programs. The increased involvement of electric and gas utilities in coordinated low-income DSM programs, in turn, has resulted in greater emphasis on estimating program cost-effectiveness. The objective of this study is to develop a methodological approach to estimate the cost- effectiveness of coordinated low-income DSM programs, given the special features that distinguish these programs from other utility-operated DSM programs. The general approach used in this study was to (1) select six coordinated low-income DSM programs from among those currently operating across the United States, (2) examine the main features of these programs, and (3) determine the conceptual and pragmatic problems associated with estimating their cost-effectiveness. Three types of coordination between government and utility cosponsors were identified. At one extreme, local agencies operate {open_quotes}parallel{close_quotes} programs, each of which is fully funded by a single sponsor (e.g., one funded by the U.S. Department of Energy and the other by a utility). At the other extreme are highly {open_quotes}coupled{close_quotes} programs that capitalize on the unique capabilities and resources offered by each cosponsor. In these programs, agencies employ a combination of utility and government funds to deliver weatherization services as part of an integrated effort. In between are {open_quotes}supplemental{close_quotes} programs that utilize resources to supplement the agency`s government-funded weatherization, with no changes to the operation of that program.

Brown, M.A.; Hill, L.J.

1994-05-01T23:59:59.000Z

206

A cost-effective, environmentally-responsive ground-water monitoring procedure  

E-Print Network (OSTI)

Ground-water monitoring is the primary method used to protect our ground-water resources. The primary objectives of monitoring programs are to detect, to attribute, and to mitigate any changes in-water quality or quantity. Previous monitoring programs have had numerous problems including the failure to produce usable information and the failure to balance the competing factors of cost-effectiveness and environmental protection. A cost-effective, environmentally-responsive ground-water procedure was designed which consists of eight steps and two feedback loops. The reason for monitoring must first be determined before clear monitoring goals can be set. Characterization of the site allows proper design of the monitoring network. Data is then collected and analyzed creating usable information. Applying this new information to the information expansion loop permits a better understanding of the initial site characterization. Finally evaluating the entire routine to determine the effectiveness of the program allows the optimization loop to modify the system for greater efficiency. The value of this procedure was tested at selected sites in the Gibbons Creek Lignite Mine in Grimes County, Texas. The mine, which is currently in compliance with state regulations, is not operating an efficient monitoring program. The problems included over-monitoring of metals in and around reclaimed mine blocks, over-monitoring by monitoring wells in the same aquifer, and the failure to attribute changes in a monitoring well near a dewatering well. The feedback loops helped to optimize the entire program by recognizing problems in the stratigraphic column and modifying the monitoring program to lower monitoring costs. Three major benefits are gained by using this procedure: the ground-water monitoring routine can be made more cost-effective, environmental protection will be increased, and environmental liability will be decreased.

Doucette, Richard Charles

1994-01-01T23:59:59.000Z

207

Cost-effective control systems for solar heating and cooling applications. Final report  

DOE Green Energy (OSTI)

A methodology has been defined to arrive at control recommendations for a variety of climate control system designs, applications and regions, and the results are presented in two parts. Part I consists of a literature and market-place survey, involving control strategies, functions, sensors, actuators, and the controllers themselves. Part II represents the bulk of the study effort - an attempt to simulate and evaluate system performance for several representative residential and commercial heating and cooling designs and thus to derive improved performance techniques within cost-effective control systems. (MHR)

Pejsa, J. H.; Bassett, W. W.; Wenzler, S. A.; Nguyen, K. H.; Olson, T. J.

1978-09-01T23:59:59.000Z

208

Federal Energy Management Program: Federal Technology Deployment Working  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Deployment Working Group Technology Deployment Working Group Energy Department Announces Interagency Committee to Increase Use of Clean Energy Technologies in Federal Facilities The Senior Executive Committee for Technology Deployment, a subcommittee of the Interagency Technology Deployment Working Group, brings together leaders of technology deployment programs from across the federal government to implement the Obama Administration's comprehensive strategy to reduce energy costs in agency facilities, while boosting American competitiveness in the global clean energy race. Learn more. Technology Briefs Boiler Combustion Control and Monitoring System Doing Time under the Sun Wireless Sensor Networks for Data Centers The Federal Technology Deployment Working Group helps Federal agencies evaluate and deploy new and underutilized technologies.

209

THE APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON SEQUESTRATION  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research projects is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Sandra Brown; Ellen Hawes; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

2002-09-01T23:59:59.000Z

210

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: remote sensing for carbon analysis; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Sandra Brown; Patrick Gonzalez; Zoe Kant; Gilberto Tiepolo; Wilber Sabido; Ellen Hawes; Jenny Henman; Miguel Calmon; Michael Ebinger

2004-07-10T23:59:59.000Z

211

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

Science Conference Proceedings (OSTI)

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Sandra Brown; Patrick Gonzalez; Brent Sohngen; Neil Sampson; Mark Anderson; Miguel Calmon; Sean Grimland; Ellen Hawes; Zoe Kant; Dan Morse; Sarah Woodhouse Murdock; Arlene Olivero; Tim Pearson; Sarah Walker; Jon Winsten; Chris Zganjar

2006-09-30T23:59:59.000Z

212

Advanced Oxyfuel Boilers and Process Heaters for Cost Effective CO2 Capture and Sequestration  

SciTech Connect

The purpose of the advanced boilers and process heaters program is to assess the feasibility of integrating Oxygen Transport Membranes (OTM) into combustion processes for cost effective CO{sub 2} capture and sequestration. Introducing CO{sub 2} capture into traditional combustion processes can be expensive, and the pursuit of alternative methods, like the advanced boiler/process heater system, may yield a simple and cost effective solution. In order to assess the integration of an advanced boiler/process heater process, this program addressed the following tasks: Task 1--Conceptual Design; Task 2--Laboratory Scale Evaluation; Task 3--OTM Development; Task 4--Economic Evaluation and Commercialization Planning; and Task 5--Program Management. This Final report documents and summarizes all of the work performed for the DOE award DE-FC26-01NT41147 during the period from January 2002-March 2007. This report outlines accomplishments for the following tasks: conceptual design and economic analysis, oxygen transport membrane (OTM) development, laboratory scale evaluations, and program management.

Max Christie; Rick Victor; Bart van Hassel; Nagendra Nagabushana; Juan Li; Joseph Corpus; Jamie Wilson

2007-03-31T23:59:59.000Z

213

Cost-Effective Integration of Efficient Low-Lift Base Load Cooling Equipment  

Science Conference Proceedings (OSTI)

The long-term goal of DOEs Commercial Buildings Integration subprogram is to develop cost-effective technologies and building practices that will enable the design and construction of net Zero Energy Buildings commercial buildings that produce as much energy as they use on an annual basis by 2025. To support this long-term goal, DOE further called for as part of its FY07 Statement of Needs the development by 2010 of five cost-effective design technology option sets using highly efficient component technologies, integrated controls, improved construction practices, streamlined commissioning, maintenance and operating procedures that will make new and existing commercial buildings durable, healthy and safe for occupants. In response, PNNL proposed and DOE funded a scoping study investigation of one such technology option set, low-lift cooling, that offers potentially exemplary HVAC energy performance relative to ASHRAE Standard 90.1-2004. The primary purpose of the scoping study was to estimate the national technical energy savings potential of this TOS.

Jiang, Wei; Winiarski, David W.; Katipamula, Srinivas; Armstrong, Peter R.

2008-01-14T23:59:59.000Z

214

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Patrick Gonzalez; Sandra Brown; Sarah Woodhouse Murdock; Jenny Henman; Zoe Kant; Gilberto Tiepolo; Tim Pearson; Neil Sampson; Miguel Calmon

2005-10-01T23:59:59.000Z

215

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Zoe Kant; Sarah Woodhouse Murdock; Neil Sampson; Gilberto Tiepolo; Tim Pearson; Sarah Walker; Miguel Calmon

2006-01-01T23:59:59.000Z

216

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between January 1st and March 31st 2007. The specific tasks discussed include: Task 1--carbon inventory advancements; Task 2--emerging technologies for remote sensing of terrestrial carbon; Task 3--baseline method development; Task 4--third-party technical advisory panel meetings; Task 5--new project feasibility studies; and Task 6--development of new project software screening tool.

Bill Stanley; Sandra Brown; Patrick Gonzalez; Brent Sohngen; Neil Sampson; Mark Anderson; Miguel Calmon; Sean Grimland; Zoe Kant; Dan Morse; Sarah Woodhouse Murdock; Arlene Olivero; Tim Pearson; Sarah Walker; Jon Winsten; Chris Zganjar

2007-03-31T23:59:59.000Z

217

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between October 1st and December 31st 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Sandra Brown; Patrick Gonzalez; Brent Sohngen; Neil Sampson; Mark Anderson; Miguel Calmon; Sean Grimland; Zoe Kant; Dan Morse; Sarah Woodhouse Murdock; Arlene Olivero; Tim Pearson; Sarah Walker; Jon Winsten; Chris Zganjar

2006-12-31T23:59:59.000Z

218

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between January 1st and March 31st 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon

2006-04-01T23:59:59.000Z

219

APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON  

SciTech Connect

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.

Bill Stanley; Sandra Brown; Ellen Hawes; Zoe Kant; Miguel Calmon; Patrick Gonzalez; Brad Kreps; Gilberto Tiepolo

2003-09-01T23:59:59.000Z

220

Development of cost-effective surfactant flooding technology. Quarterly report, April 1995--June 1995  

SciTech Connect

The objective of this research is to develop cost-effective surfactant flooding technology by using surfactant simulation studies to evaluate and optimize alternative design strategies taking into account reservoir characteristics, process chemistry, and process design options such as horizontal wells. Task 1 is the development of an improved numerical method for our simulator that will enable us to solve a wider class of these difficult simulation problems, accurately and affordably. Task 2 is the application of this simulator to the optimization of surfactant flooding to reduce its risk and cost. The objective of Task 2 is to investigate and evaluate, through a systematic simulation study, surfactant flooding processes that are cost-effective. We previously have reported on low tension polymer flooding as an alternative to classical surfactant/polymer flooding. In this reporting period, we have studied the potential of improving the efficiency of surfactant/polymer flooding by coinjecting an alkali agent such as sodium carbonate under realistic reservoir conditions and process behavior. The alkaline/surfactant/polymer (ASP) flood attempts to take advantage of high pH fluids to reduce the amount of surfactant needed by the chemical reactions between injection fluid and formation fluid or formation rocks.

Pope, G.A.; Sepehrnoori, K.; Jessen, F.W.

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Optimal Deployment Plan of Emission Reduction Technologies for TxDOT's Construction Equipment  

E-Print Network (OSTI)

The purpose of this study was to develop and test an optimization model that will provide a deployment plan of emission reduction technologies to reduce emissions from non-road equipment. The focus of the study was on the counties of Texas that have nonattainment (NA) and near-nonattainment (NNA) status. The objective of this research was to develop methodologies that will help to deploy emission reduction technologies for non-road equipment of TxDOT to reduce emissions in a cost effective and optimal manner. Three technologies were considered for deployment in this research, (1) hydrogen enrichment (HE), (2) selective catalytic reduction (SCR) and (3) fuel additive (FA). Combinations of technologies were also considered in the study, i.e. HE with FA, and SCR with FA. Two approaches were investigated in this research. The first approach was "Method 1" in which all the technologies, i.e. FA, HE and SCR were deployed in the NA counties at the first stage. In the second stage the same technologies were deployed in the NNA counties with the remaining budget, if any. The second approach was called "Method 2" in which all the technologies, i.e. FA, HE and SCR were deployed in the NA counties along with deploying only FA in the NNA counties at the first stage. Then with the remaining budget, SCR and HE were deployed in the NNA counties in the second stage. In each of these methods, 2 options were considered, i.e. maximizing NOx reduction with and without fuel economy consideration in the objective function. Thus, the four options investigated each having different mixes of emission reduction technologies include Case 1A: Method 1 with fuel economy consideration; Case 1B: Method 1 without fuel economy consideration; Case 2A: Method 2 with fuel economy consideration; and Case 2B: Method 2 without fuel economy consideration and were programmed with Visual C++ and ILOG CPLEX. These four options were tested for budget amounts ranging from $500 to $1,183,000 and the results obtained show that for a given budget one option representing a mix of technologies often performed better than others. This is conceivable because for a given budget the optimization model selects an affordable option considering the cost of technologies involved while at the same time maximum emission reduction, with and without fuel economy consideration, is achieved. Thus the alternative options described in this study will assist the decision makers to decide about the deployment preference of technologies. For a given budget, the decision maker can obtain the results for total NOx reduction, combined diesel economy and total combined benefit using the four models mentioned above. Based on their requirements and priorities, they can select the desired model and subsequently obtain the required deployment plan for deploying the emission reduction technologies in the NA and NNA counties.

Bari, Muhammad Ehsanul

2009-08-01T23:59:59.000Z

222

Deployment Effects of Marin Renewable Energy Technologies  

DOE Green Energy (OSTI)

This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nom

Brian Polagye; Mirko Previsic

2010-06-17T23:59:59.000Z

223

Federal Technology Deployment Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies » Technology Deployment » Federal Technology Technologies » Technology Deployment » Federal Technology Deployment Working Group Federal Technology Deployment Working Group October 7, 2013 - 9:11am Addthis Energy Department Announces Interagency Committee to Increase Use of Clean Energy Technologies in Federal Facilities The Senior Executive Committee for Technology Deployment, a subcommittee of the Interagency Technology Deployment Working Group, brings together leaders of technology deployment programs from across the federal government to implement the Obama Administration's comprehensive strategy to reduce energy costs in agency facilities, while boosting American competitiveness in the global clean energy race. Learn more. The Federal Technology Deployment Working Group helps Federal agencies evaluate and deploy new and underutilized technologies.

224

SunShot Initiative: High Penetration Solar Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

High Penetration Solar Deployment High Penetration Solar Deployment to someone by E-mail Share SunShot Initiative: High Penetration Solar Deployment on Facebook Tweet about SunShot Initiative: High Penetration Solar Deployment on Twitter Bookmark SunShot Initiative: High Penetration Solar Deployment on Google Bookmark SunShot Initiative: High Penetration Solar Deployment on Delicious Rank SunShot Initiative: High Penetration Solar Deployment on Digg Find More places to share SunShot Initiative: High Penetration Solar Deployment on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive Awards Solar Utility Networks: Replicable Innovations in Solar Energy High Penetration Solar Deployment Grid Integration Advanced Concepts

225

Nuclear Power - Deployment, Operation and Sustainability  

E-Print Network (OSTI)

We are fortunate to live in incredibly exciting and incredibly challenging time. Energy demands due to economic growth and increasing population must be satisfied in a sustainable manner assuring inherent safety, efficiency and no or minimized environmental impact. These considerations are among the reasons that lead to serious interest in deploying nuclear power as a sustainable energy source. At the same time, catastrophic earthquake and tsunami events in Japan resulted in the nuclear accident that forced us to rethink our approach to nuclear safety, design requirements and facilitated growing interests in advanced nuclear energy systems. This book is one in a series of books on nuclear power published by InTech. It consists of six major sections housing twenty chapters on topics from the key subject areas pertinent to successful development, deployment and operation of nuclear power systems worldwide. The book targets everyone as its potential readership groups - students, researchers and practitioners - who are interested to learn about nuclear power.

Tsvetkov, Pavel

2011-09-01T23:59:59.000Z

226

Deployment Effects of Marin Renewable Energy Technologies  

Science Conference Proceedings (OSTI)

Given proper care in siting, design, deployment, operation and maintenance, marine and hydrokinetic technologies could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood, due to a lack of technical certainty. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based approach to the emerging wave and tidal technology sectors in order to evaluate the impact of these technologies on the marine environment and potentially conflicting uses. The projects scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios will capture variations in technical approaches and deployment scales to properly identify and characterize environmental impacts and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential effects of these emerging technologies and focus all stakeholders onto the critical issues that need to be addressed. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industrys development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory and navigational issues. The results of this study are structured into three reports: 1. Wave power scenario description 2. Tidal power scenario description 3. Framework for Identifying Key Environmental Concerns This is the second report in the sequence and describes the results of conceptual feasibility studies of tidal power plants deployed in Tacoma Narrows, Washington. The Narrows contain many of the same competing stakeholder interactions identified at other tidal power sites and serves as a representative case study. Tidal power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize impacts, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informs the process of selecting representative tidal power devices. The selection criteria is that such devices are at an advanced stage of development to reduce technical uncertainties and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. A number of other developers are also at an advanced stage of development including Verdant Power, which has demonstrated an array of turbines in the East River of New York, Clean Current, which has demonstrated a device off Race Rocks, BC, and OpenHydro, which has demonstrated a device at the European Marine Energy Test Center and is on the verge of deploying a larger device in the Bay of Fundy. MCT demonstrated their device both at Devon (UK) and Strangford Narrows (Northern Ireland). Furthermore OpenHydro, CleanCurrent, and MCT are the three devices being installed at the Minas Passage (Canada). Environmental effects will largely scale with the size of tidal power development. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nom

Brian Polagye; Mirko Previsic

2010-06-17T23:59:59.000Z

227

New Wind Energy Technologies Are Cost-Effective in Federal Applications--Technology Focus  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

energy systems are producing energy systems are producing electricity in some areas of the United States for 5¢ per kilowatt-hour (kWh) or less. As the demand for advanced wind systems increases, wind turbines can be manufactured on a larger scale. This demand, coupled with improvements in the technology, will further reduce the cost of wind- generated electricity. Today, using wind systems to generate electricity can be a cost-effective option for many Federal facilities. This is especially true for facilities that have access to good wind resources and rela- tively high utility costs, and those that depend on diesel power generation. Applications for wind systems are similar to those for solar systems: * Remote communications equipment * Ranger stations * Military installations * Visitor centers and other facilities in

228

Projected cost-effectiveness of alternative residential space cooling systems in the Sacramento area  

SciTech Connect

Electric utilities around the country are seeking to evaluate new demand-side management (DSM) programs and technologies on an equal basis with supply-side resources. In evaluating future demand and supply resources, utilities need to consider uncertainties inherent in prediction. In this paper, five residential space cooling technologies (high efficiency heat pumps, some coupled with utility direct load control or with thermal energy storage), are defined and computer simulation of their performance are described. Cost-effectiveness of the five alternatives are then evaluated, and the relative uncertainty of the data inputs are tested by using the Monte Carlo technique of probability analysis. This comparative analysis comprises an initial screening of potential DSM technologies, and provides a framework and direction for more detailed analysis of these technologies in the future.

Kallett, R.H. (Sacramento Municipal Utility District, Box 15830, Sacramento, CA (US))

1988-08-01T23:59:59.000Z

229

Exploring Cost-Effective, High Performance Residential Retrofits for Affordable Housing in the Hot Humid Climate  

E-Print Network (OSTI)

In 2009, a Department of Energy Building America team led by the Florida Solar Energy Center began working with partners to find cost-effective paths for improving the energy performance of existing homes in the hot humid climate. A test-in energy audit and energy use modeling of the partners proposed renovation package was performed for 41 affordable and middle income foreclosed homes in Florida and Alabama. HERS1 Indices ranged from 92 to 184 with modeled energy savings ranging from 3% to 50% (average of 26%). Analyses and recommendations were discussed with partners to encourage more efficient retrofits, highlight health and safety issues, and gather feedback on incremental cost of high performance measures. Ten completed renovations have modeled energy savings ranging from 9% to 48% (average 31%.) This paper presents the projects process including our findings thus far and highlights of the first home to meet the target HERS Index of 70.

McIlvaine, J.; Sutherland, K.; Chandra, S.; Schleith, K.

2010-08-01T23:59:59.000Z

230

Cost-effective remediation and closure of petroleum-contaminated sites  

Science Conference Proceedings (OSTI)

This book provides environmental managers and their supporting technical specialists with a comprehensive strategy for cost-effectively cleaning up soils and groundwater contaminated by petroleum releases. It includes the most recent advances in site investigation techniques, low-cost remedial approaches, and technologies. It uses a risk-based process to answer key questions involved in developing a remediation or closure plan for a petroleum spill site. Several approaches are described that include risk management methods which use institutional controls to isolate contaminants from human contact and long-term monitoring to verify that natural attenuation is reducing future risk. More traditional risk evaluations and simplified RBCA methods are also presented that use site-specific exposure assumptions to develop risk-based cleanup objectives. Case studies illustrate how various combinations of land-use control, site-specific risk analysis, natural attenuation, and focused source reduction technologies have been used to obtain risk-based closures at sites across the US.

Downey, D.C.; Hinchee, R.E.; Miller, R.N.

1999-10-01T23:59:59.000Z

231

Cost effective solar hot water system for econo-travel motor hotel located at Hampton, VA  

SciTech Connect

This paper gives the final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 2708 Mercury Boulevard, Hampton, Virginia. The description of the system along with the final cost breakdown, performance data and payback time are given. The payback time for the installed system will be approximately four (4) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. As called for in the proposal to DOE, the success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

1978-11-01T23:59:59.000Z

232

Cost effective solar hot water system for Econo-Travel Motor Hotel, Chesapeake, Virginia. Final report  

SciTech Connect

The final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 4725 W. Military Highway, Chesapeake, Virginia, is presented. The description of the system along with the final breakdown performance data and payback time are given. The payback time for the installed system will be approximately four (4) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. As called for in the proposal to DOE, the success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

1978-12-01T23:59:59.000Z

233

Solar-assisted heat pump system for cost-effective space heating and cooling  

DOE Green Energy (OSTI)

The use of heat pumps for the utilization of solar energy is studied. Two requirements for a cost-effective system are identified: (1) a special heat pump whose coefficient of performance continues to rise with source temperature over the entire range appropriate for solar assist, and (2) a low-cost collection and storage subsystem able to supply solar energy to the heat pump efficiently at low temperatures. Programs leading to the development of these components are discussed. A solar assisted heat pump system using these components is simulated via a computer, and the results of the simulation are used as the basis for a cost comparison of the proposed system with other solar and conventional systems.

Andrews, J W; Kush, E A; Metz, P D

1978-03-01T23:59:59.000Z

234

Exploring Cost-Effective, High Performance Residential Retrofits for Affordable Housing in the Hot Humid Climate  

SciTech Connect

In 2009, a Department of Energy Building America team led by the Florida Solar Energy Center began working with partners to find cost-effective paths for improving the energy performance of existing homes in the hot humid climate. A test-in energy audit and energy use modeling of the partner's proposed renovation package was performed for 41 affordable and middle income foreclosed homes in Florida and Alabama. HERS1 Indices ranged from 92 to 184 with modeled energy savings ranging from 3% to 50% (average of 26%). Analyses and recommendations were discussed with partners to encourage more efficient retrofits, highlight health and safety issues, and gather feedback on incremental cost of high performance measures. Ten completed renovations have modeled energy savings ranging from 9% to 48% (average 31%.) This paper presents the project's process including our findings thus far and highlights of the first home to meet the target HERS Index of 70.

McIlvaine, Janet; Sutherland, Karen; Schleith, Kevin; Chandra, Subrato

2010-08-27T23:59:59.000Z

235

Cost effective solar hot water system for econo-travel motor hotel located at Hampton, VA  

DOE Green Energy (OSTI)

This paper gives the final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 2708 Mercury Boulevard, Hampton, Virginia. The description of the system along with the final cost breakdown, performance data and payback time are given. The payback time for the installed system will be approximately four (4) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. As called for in the proposal to DOE, the success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

Not Available

1978-11-01T23:59:59.000Z

236

Cost effective solar hot water system for Econo-Travel Motor Hotel, Chesapeake, Virginia. Final report  

DOE Green Energy (OSTI)

The final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 4725 W. Military Highway, Chesapeake, Virginia, is presented. The description of the system along with the final breakdown performance data and payback time are given. The payback time for the installed system will be approximately four (4) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. As called for in the proposal to DOE, the success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

Not Available

1978-12-01T23:59:59.000Z

237

New Wind Energy Technologies Are Cost-Effective in Federal Applications--Technology Focus  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind energy systems are producing Wind energy systems are producing electricity in some areas of the United States for 5¢ per kilowatt-hour (kWh) or less. As the demand for advanced wind systems increases, wind turbines can be manufactured on a larger scale. This demand, coupled with improvements in the technology, will further reduce the cost of wind- generated electricity. Today, using wind systems to generate electricity can be a cost-effective option for many Federal facilities. This is especially true for facilities that have access to good wind resources and rela- tively high utility costs, and those that depend on diesel power generation. Applications for wind systems are similar to those for solar systems: * Remote communications equipment * Ranger stations * Military installations * Visitor centers and other facilities in

238

PNNL Technology Planning and Deployment Group | Open Energy Information  

Open Energy Info (EERE)

Planning and Deployment Group Planning and Deployment Group (Redirected from Technology Planning and Deployment) Jump to: navigation, search Logo: Technology Planning and Deployment Name Technology Planning and Deployment Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tpd.pnl.gov/ References Technology Planning and Development [1] "The Technology Planning & Deployment (TP&D) group is part of the Pacific Northwest National Laboratory's (PNNL's) Energy and Environment Directorate. TP&D staff provide customers with a unique combination of experience and expertise with capabilities in economics and regulatory analysis, systems engineering, marketing, technology adaptation and application, policy analysis, and project management."[1]

239

Commercial Deployment Drivers for Biomass Gasification Technologies  

Science Conference Proceedings (OSTI)

Biomass gasification-based power and combined heat and power (CHP) technologies have still not met their full potential despite several decades of research, development, and deployment. This report examines the technical, economic, and policy problems that have hindered the development of these technologies and describes a detailed parametric study of key economic and environmental performance variables for various biomass technologies in order to identify which factors are most important in planning new...

2009-07-08T23:59:59.000Z

240

Cost effectiveness of the 1993 model energy code in New Jersey  

SciTech Connect

This is an analysis of cost effectiveness the Council of American Building Officials` 1993 Model Energy Code (MEC) building thermal-envelope requirements for single-family houses and multifamily housing units in New Jersey. Goal was to compare the cost effectiveness of the 1993 MEC to the alternate allowed in the 1993 Building Officials & Code Administrators (BOCA) National Energy Conservation Code -- American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE) Standard 90A-1980 -- based on a comparison of the costs and benefits associated with complying with each. This comparison was performed for Camden, New Brunswick; Somerville, and Sparta. The analysis was done for two different scenarios: a ``move-up`` home buyer purchasing a single-family house and a ``first-time`` financially limited home buyer purchasing a multifamily unit. For the single-family home buyer, compliance with the 1993 MEC was estimated to increase first costs by $1028 to $1564, resulting in an incremental down payment increase of $206 to $313 (at 20% down). The time when the homeowner realizes net cash savings (net positive cash flow) for houses built in accordance with the 1993 MEC was from 1 to 5 years. The home buyer who paid 20% down had recovered increases in down payments and mortgage payments in energy cost savings by the end of the fifth year or sooner and thereafter will save more money each year. For the multifamily unit home buyer first costs were estimated to increase by $121 to $223, resulting in an incremental down payment increase of $12 to $22 (at 10% down). The time when the homeowner realizes net cash savings (net positive cash flow) for houses built in accordance with the 1993 MEC was 1 to 3 years.

Lucas, R.G.

1995-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Report on the planning workshop on cost-effective ceramic machining. Ceramic Technology Project  

DOE Green Energy (OSTI)

A workshop on ``Cost Effective Ceramic Machining`` (CECM) was held at Oak Ridge Associated Universities Pollard Auditorium, Oak Ridge, Tennessee, May 1991. The purpose of this workshop was to present a preliminary project plan for industry critique and to identify specific components and cost-reduction targets for a new project on Cost Effective Ceramic Machining. The CECM project is an extension of the work on the Ceramic Technology for Advanced Heat Engines (CTAHE) Program sponsored by the Department of Energy, Office of Transportation Materials. The workshop consisted of fifteen invited papers, discussions, a survey of the attendee`s opinions, and a tour of the High Temperature Materials Laboratory at ORNL. The total number of registrants was sixty-seven, including thirty-three from industry or private sector organizations, seven from universities, three from industry groups, fourteen from DOE laboratories (including ORNL, Y-12, and Lawrence Livermore Laboratory), three from trade associations, and three from other government organizations. Forty- one survey forms, which critiqued the proposed project plan, were completed by attendees, and the results are presented in this report. Valves, cam roller followers, water pump seals, and diesel engine head plates were rated highest fro application of ceramic machining concepts to reduce cost. Coarse grinding, abrasives and wheel technology, and fine grinding were most highly rated as regards their impact on cost reduction. Specific cost-reduction targets for given parts varied greatly in the survey results and were not felt to be useful for the purposes for the CECM plan development. A range of individual comments were obtained and are listed in an appendix. As a result of the workshop and subsequent discussions, a modified project plan, different in certain aspects from the original CECM plan, has been developed.

Blau, P.J.

1991-11-01T23:59:59.000Z

242

Report on the planning workshop on cost-effective ceramic machining  

SciTech Connect

A workshop on Cost Effective Ceramic Machining'' (CECM) was held at Oak Ridge Associated Universities Pollard Auditorium, Oak Ridge, Tennessee, May 1991. The purpose of this workshop was to present a preliminary project plan for industry critique and to identify specific components and cost-reduction targets for a new project on Cost Effective Ceramic Machining. The CECM project is an extension of the work on the Ceramic Technology for Advanced Heat Engines (CTAHE) Program sponsored by the Department of Energy, Office of Transportation Materials. The workshop consisted of fifteen invited papers, discussions, a survey of the attendee's opinions, and a tour of the High Temperature Materials Laboratory at ORNL. The total number of registrants was sixty-seven, including thirty-three from industry or private sector organizations, seven from universities, three from industry groups, fourteen from DOE laboratories (including ORNL, Y-12, and Lawrence Livermore Laboratory), three from trade associations, and three from other government organizations. Forty- one survey forms, which critiqued the proposed project plan, were completed by attendees, and the results are presented in this report. Valves, cam roller followers, water pump seals, and diesel engine head plates were rated highest fro application of ceramic machining concepts to reduce cost. Coarse grinding, abrasives and wheel technology, and fine grinding were most highly rated as regards their impact on cost reduction. Specific cost-reduction targets for given parts varied greatly in the survey results and were not felt to be useful for the purposes for the CECM plan development. A range of individual comments were obtained and are listed in an appendix. As a result of the workshop and subsequent discussions, a modified project plan, different in certain aspects from the original CECM plan, has been developed.

Blau, P.J.

1991-11-01T23:59:59.000Z

243

Cost Effective Recovery of Low-TDS Frac Flowback Water for Re-use  

Science Conference Proceedings (OSTI)

The project goal was to develop a cost-effective water recovery process to reduce the costs and envi-ronmental impact of shale gas production. This effort sought to develop both a flowback water pre-treatment process and a membrane-based partial demineralization process for the treatment of the low-Total Dissolved Solids (TDS) portion of the flowback water produced during hydrofracturing operations. The TDS cutoff for consideration in this project is shale plays, identified the likely applicability of membrane treatment processes in those shales, and expanded the proposed product portfolio to include four options suitable for various reuse or discharge applications. Pretreatment technologies were evaluated at the lab scale and down-selected based upon their efficacy in removing key contaminants. The chosen technologies were further validated by performing membrane fouling studies with treated flowback water to demonstrate the technical feasibility of flowback treatment with RO membranes. Process flow schemes were constructed for each of the four product options based on experimental performance data from actual flowback water treatment studies. For the products requiring membrane treatment, membrane system model-ing software was used to create designs for enhanced water recovery beyond the typical seawater desalination benchmark. System costs based upon vendor and internal cost information for all process flow schemes were generated and are below target and in line with customer expectations. Finally, to account for temporal and geographic variability in flowback characteristics as well as local disposal costs and regulations, a parametric value assessment tool was created to assess the economic attractiveness of a given flowback recovery process relative to conventional disposal for any combination of anticipated flowback TDS and local disposal cost. It is concluded that membrane systems in combination with appropriate pretreatment technologies can provide cost-effective recovery of low-TDS flow-back water for either beneficial reuse or safe surface discharge.

Claire Henderson; Harish Acharya; Hope Matis; Hareesh Kommepalli; Brian Moore; Hua Wang

2011-03-31T23:59:59.000Z

244

A comparison of estimates of cost-effectiveness of alternative fuels and vehicles for reducing emissions  

DOE Green Energy (OSTI)

The cost-effectiveness ratio (CER) is a measure of the monetary value of resources expended to obtain reductions in emissions of air pollutants. The CER can lead to selection of the most effective sequence of pollution reduction options. Derived with different methodologies and technical assumptions, CER estimates for alternative fuel vehicles (AFVs) have varied widely among pervious studies. In one of several explanations of LCER differences, this report uses a consistent basis for fuel price to re-estimate CERs for AFVs in reduction of emissions of criteria pollutants, toxics, and greenhouse gases. The re-estimated CERs for a given fuel type have considerable differences due to non-fuel costs and emissions reductions, but the CERs do provide an ordinal sense of cost-effectiveness. The category with CER less than $5,000 per ton includes compressed natural gas and ed Petroleum gas vehicles; and E85 flexible-fueled vehicles (with fuel mixture of 85 percent cellulose-derived ethanol in gasoline). The E85 system would be much less attractive if corn-derived ethanol were used. The CER for E85 (corn-derived) is higher with higher values placed on the reduction of gas emissions. CER estimates are relative to conventional vehicles fueled with Phase 1 California reformulated gasoline (RFG). The California Phase 2 RFG program will be implemented before significant market penetration by AFVs. CERs could be substantially greater if they are calculated incremental to the Phase 2 RFG program. Regression analysis suggests that different assumptions across studies can sometimes have predictable effects on the CER estimate of a particular AFV type. The relative differences in cost and emissions reduction assumptions can be large, and the effect of these differences on the CER estimate is often not predictable. Decomposition of CERs suggests that methodological differences can make large contributions to CER differences among studies.

Hadder, G.R.

1995-11-01T23:59:59.000Z

245

Regional Effort to Deploy Clean Coal Technologies  

SciTech Connect

The Southern States Energy Board's (SSEB) 'Regional Effort to Deploy Clean Coal Technologies' program began on June 1, 2003, and was completed on January 31, 2009. The project proved beneficial in providing state decision-makers with information that assisted them in removing barriers or implementing incentives to deploy clean coal technologies. This was accomplished through two specific tasks: (1) domestic energy security and diversity; and (2) the energy-water interface. Milestones accomplished during the project period are: (1) Presentations to Annual Meetings of SSEB Members, Associate Member Meetings, and the Gasification Technologies Council. (2) Energy: Water reports - (A) Regional Efforts to Deploy Clean Coal Technologies: Impacts and Implications for Water Supply and Quality. June 2004. (B) Energy-Water Interface Challenges: Coal Bed Methane and Mine Pool Water Characterization in the Southern States Region. 2004. (C) Freshwater Availability and Constraints on Thermoelectric Power Generation in the Southeast U.S. June 2008. (3) Blackwater Interactive Tabletop Exercise - Decatur, Georgia April 2007. (4) Blackwater Report: Blackwater: Energy and Water Interdependency Issues: Best Practices and Lessons Learned. August 2007. (5) Blackwater Report: BLACKWATER: Energy Water Interdependency Issues REPORT SUMMARY. April 2008.

Gerald Hill; Kenneth Nemeth; Gary Garrett; Kimberly Sams

2009-01-31T23:59:59.000Z

246

NREL: Regional Energy Deployment System (ReEDS) Model - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Regional Energy Deployment System (ReEDS) Model Energy Analysis ReEDS Regional Energy Deployment System Model Regional Energy Deployment System (ReEDS) Model Energy Analysis ReEDS Regional Energy Deployment System Model Search More Search Options Site Map Printable Version Publications The following are publications - including technical reports, journal articles, conference papers, and posters - focusing on the Wind Deployment System (WinDS) and Regional Energy Deployment System (ReEDS) models. Technical Reports Eurek, K.; Denholm, P.; Margolis, R.; Mowers, M. (2013). Sensitivity of Utility-Scale Solar Deployment Projections in the SunShot Vision Study to Market and Performance Assumptions. 55 pp.; NREL Report No. TP-6A20-55836. Martinez, A.; Eurek, K.; Mai, T.; Perry, A. (2013). Integrated Canada-U.S. Power Sector Modeling with the Regional Energy Deployment System (ReEDS).

247

SunShot Initiative: Deployable Commercial Rooftop Solar Electric System  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployable Commercial Rooftop Deployable Commercial Rooftop Solar Electric System to someone by E-mail Share SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on Facebook Tweet about SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on Twitter Bookmark SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on Google Bookmark SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on Delicious Rank SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on Digg Find More places to share SunShot Initiative: Deployable Commercial Rooftop Solar Electric System on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive Awards Solar Utility Networks: Replicable Innovations in Solar Energy

248

The middlebox manifesto: enabling innovation in middlebox deployment  

Science Conference Proceedings (OSTI)

Most network deployments respond to changing application, workload, and policy requirements via the deployment of specialized network appliances or "middleboxes". Despite the critical role that middleboxes play in introducing new network functionality, ... Keywords: consolidation, middlebox, network management

Vyas Sekar; Sylvia Ratnasamy; Michael K. Reiter; Norbert Egi; Guangyu Shi

2011-11-01T23:59:59.000Z

249

A case study in configuration management tool deployment  

Science Conference Proceedings (OSTI)

While configuration management systems are generally regarded as useful, their deployment process is not well understood or documented. In this paper, we present a case study in configuration management tool deployment. We describe the motivating factors ...

Narayan Desai; Rick Bradshaw; Scott Matott; Sandra Bittner; Susan Coghlan; Rmy Evard; Cory Lueninghoener; Ti Leggett; John-Paul Navarro; Gene Rackow; Craig Stacey; Tisha Stacey

2005-12-01T23:59:59.000Z

250

Vehicle Technologies Office: The eGallon Tool Advances Deployment...  

NLE Websites -- All DOE Office Websites (Extended Search)

The eGallon Tool Advances Deployment of Electric Vehicles to someone by E-mail Share Vehicle Technologies Office: The eGallon Tool Advances Deployment of Electric Vehicles on...

251

A Delaunay Triangulation Based Method for Wireless Sensor Network Deployment  

Science Conference Proceedings (OSTI)

To obtain a satisfied performance of wireless sensor network, an adaptable sensor deployment method for various applications is essential. In this paper, we propose a centralized sensor deployment method, DT-Score, aims to maximize the coverage of a ...

Chun-Hsien Wu; Kuo-Chuan Lee; Yeh-Ching Chung

2006-07-01T23:59:59.000Z

252

Impact of the Demand-Side Management (DSM) Program structure on the cost-effectiveness of energy efficiency projects  

SciTech Connect

Pacific Northwest Laboratory (PNL) analyzed the cost-effective energy efficiency potential of Fort Drum, a customer of the Niagara Mohawk Power Corporation (NMPC) in Watertown, New York. Significant cost-effective investments were identified, even without any demand-side management (DSM) incentives from NMPC. Three NMPC DSM programs were then examined to determine the impact of participation on the cost-effective efficiency potential at the Fort. The following three utility programs were analyzed: (1) utility rebates to be paid back through surcharges, (2) a demand reduction program offered in conjunction with an energy services company, and (3) utility financing. Ultimately, utility rebates and financing were found to be the best programs for the Fort. This paper examines the influence that specific characteristics of the DSM programs had on the decision-making process of one customer. Fort Drum represents a significant demand-side resource, whose decisions regarding energy efficiency investments are based on life-cycle cost analysis subject to stringent capital constraints. The structures of the DSM programs offered by NMPC affect the cost-effectiveness of potential efficiency investments and the ability of the Fort to obtain sufficient capital to implement the projects. This paper compares the magnitude of the cost-effective resource available under each program, and the resulting level of energy and demand savings. The results of this analysis can be used to examine how DSM program structures impact the decision-making process of federal and large commercial customers.

Stucky, D.J.; Shankle, S.A.; Dixon, D.R.; Elliott, D.B.

1994-12-01T23:59:59.000Z

253

Why the Time is Right to Deploy Alternative Fuels (Presentation)  

SciTech Connect

Presentation outlines industry trends and statistics that show why now is the time to deploy alternative fuels and vehicles.

Harrow, G.

2007-09-14T23:59:59.000Z

254

A New Commissioning and Deployment Method for Wireless Sensor Networks  

Science Conference Proceedings (OSTI)

Sensor networks are deployed on various environments in order to collect sensing information in many cases. It is not easy to optimize program codes of all nodes due to the environmental variety of deployment of sensor networks. Therefore, commissioning ... Keywords: sensor network, commissioning, ZigBee, network deployment

Bong Wan Kim; Seong-Soon Joo

2009-10-01T23:59:59.000Z

255

The hitchhiker's guide to successful residential sensing deployments  

Science Conference Proceedings (OSTI)

Homes are rich with information about people's energy consumption, medical health, and personal or family functions. In this paper, we present our experiences deploying large-scale residential sensing systems in over 20 homes. Deploying small-scale systems ... Keywords: buildings, deployment, sensor networks, smart homes

Timothy W. Hnat; Vijay Srinivasan; Jiakang Lu; Tamim I. Sookoor; Raymond Dawson; John Stankovic; Kamin Whitehouse

2011-11-01T23:59:59.000Z

256

A Delaunay Triangulation based method for wireless sensor network deployment  

Science Conference Proceedings (OSTI)

To obtain a satisfied performance of wireless sensor network, an adaptable sensor deployment method for various applications is essential. In this paper, we propose a centralized and deterministic sensor deployment method, DT-Score (Delaunay Triangulation-Score), ... Keywords: Delaunay Triangulation, Obstacles, Sensor coverage, Sensor deployment, Wireless sensor network

Chun-Hsien Wu; Kuo-Chuan Lee; Yeh-Ching Chung

2007-10-01T23:59:59.000Z

257

Cost-Effectiveness of Home Energy Retrofits in Pre-Code Vintage Homes in the United States  

SciTech Connect

This analytical study examines the opportunities for cost-effective energy efficiency and renewable energy retrofits in residential archetypes constructed prior to 1980 (Pre-Code) in fourteen U.S. cities. These fourteen cities are representative of each of the International Energy Conservation Code (IECC) climate zones in the contiguous U.S. The analysis is conducted using an in-house version of EnergyGauge USA v.2.8.05 named CostOpt that has been programmed to perform iterative, incremental economic optimization on a large list of residential energy efficiency and renewable energy retrofit measures. The principle objectives of the study are as follows: to determine the opportunities for cost effective source energy reductions in this large cohort of existing residential building stock as a function of local climate and energy costs; and to examine how retrofit financing alternatives impact the source energy reductions that are cost effectively achievable.

Fairey, P.; Parker, D.

2012-11-01T23:59:59.000Z

258

Cost Effective Recovery of Low-TDS Frac Flowback Water for Re-use  

SciTech Connect

The project goal was to develop a cost-effective water recovery process to reduce the costs and envi-ronmental impact of shale gas production. This effort sought to develop both a flowback water pre-treatment process and a membrane-based partial demineralization process for the treatment of the low-Total Dissolved Solids (TDS) portion of the flowback water produced during hydrofracturing operations. The TDS cutoff for consideration in this project is < 35,000 {approx} 45,000 ppm, which is the typical limit for economic water recovery employing reverse osmosis (RO) type membrane desalination processes. The ultimate objective is the production of clean, reclaimed water suitable for re-use in hydrofracturing operations. The team successfully compiled data on flowback composition and other attributes across multiple shale plays, identified the likely applicability of membrane treatment processes in those shales, and expanded the proposed product portfolio to include four options suitable for various reuse or discharge applications. Pretreatment technologies were evaluated at the lab scale and down-selected based upon their efficacy in removing key contaminants. The chosen technologies were further validated by performing membrane fouling studies with treated flowback water to demonstrate the technical feasibility of flowback treatment with RO membranes. Process flow schemes were constructed for each of the four product options based on experimental performance data from actual flowback water treatment studies. For the products requiring membrane treatment, membrane system model-ing software was used to create designs for enhanced water recovery beyond the typical seawater desalination benchmark. System costs based upon vendor and internal cost information for all process flow schemes were generated and are below target and in line with customer expectations. Finally, to account for temporal and geographic variability in flowback characteristics as well as local disposal costs and regulations, a parametric value assessment tool was created to assess the economic attractiveness of a given flowback recovery process relative to conventional disposal for any combination of anticipated flowback TDS and local disposal cost. It is concluded that membrane systems in combination with appropriate pretreatment technologies can provide cost-effective recovery of low-TDS flow-back water for either beneficial reuse or safe surface discharge.

Claire Henderson; Harish Acharya; Hope Matis; Hareesh Kommepalli; Brian Moore; Hua Wang

2011-03-31T23:59:59.000Z

259

Leading the Nation in Clean Energy Deployment (Fact Sheet), Integrated Deployment: Overview of Projects (ID)  

NLE Websites -- All DOE Office Websites (Extended Search)

Leading the Nation in Clean Energy Deployment Leading the Nation in Clean Energy Deployment The U.S. Department of Energy (DOE) is pursuing an aggressive, scalable, and replicable strategy to accelerate market adoption of clean energy solutions to power homes, businesses, and vehicles. Using the comprehensive Integrated Deployment approach developed by the National Renewable Energy Laboratory (NREL), DOE partners with communities, cities, states, federal agen- cies, and territories to identify and implement a variety of efficiency and renewable energy technology solutions. Disaster Recovery DOE and NREL technical experts have helped communities like Greensburg, Kansas, and New Orleans, Louisiana, successfully rebuild following disaster by providing assistance with sustainable community planning, forward-thinking policy development, and

260

Leading the Nation in Clean Energy Deployment (Fact Sheet), Integrated Deployment: Overview of Projects (ID)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the Nation in Clean Energy Deployment the Nation in Clean Energy Deployment The U.S. Department of Energy (DOE) is pursuing an aggressive, scalable, and replicable strategy to accelerate market adoption of clean energy solutions to power homes, businesses, and vehicles. Using the comprehensive Integrated Deployment approach developed by the National Renewable Energy Laboratory (NREL), DOE partners with communities, cities, states, federal agen- cies, and territories to identify and implement a variety of efficiency and renewable energy technology solutions. Disaster Recovery DOE and NREL technical experts have helped communities like Greensburg, Kansas, and New Orleans, Louisiana, successfully rebuild following disaster by providing assistance with sustainable community planning, forward-thinking policy development, and

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES.  

Science Conference Proceedings (OSTI)

The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures.

KALB,P.D.; MILIAN,L.; LUCKETT,L.; WATTERS,D.; MILLER,K.M.; GOGOLAK,C.

2001-05-01T23:59:59.000Z

262

Sandia National Laboratories: Research: Facilities: Technology Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Engineering Sciences Experimental Facilities (ESEF) Engineering Sciences Experimental Facilities (ESEF) Technology Deployment Centers Advanced Power Sources Laboratory Engineering Sciences Experimental Facilities (ESEF) Trisonic Wind Tunnel Hypersonic Wind Tunnel High Altitude Chamber Explosive Components Facility Ion Beam Laboratory Materials Science and Engineering Center Pulsed Power and Systems Validation Facility Radiation Detection Materials Characterization Laboratory Shock Thermodynamic Applied Research Facility (STAR) Weapon and Force Protection Center Design, Evaluation and Test Technology Facility Research Engineering Sciences Experimental Facilities (ESEF) The ESEF complex contains several independent laboratories for experiments and advanced diagnostics in the fields of thermodynamics, heat transfer,

263

NREL: Technology Deployment - Building Energy Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Systems Building Energy Systems NREL experts develop comprehensive energy assessments, models, and tools to optimize building systems across energy efficiency and renewable energy while also improving occupant comfort, safety, and productivity. Northeast Denver Housing Center Northeast Denver Housing Center NREL Identifies PV for 28 Affordable Housing Units Boulder County Housing Authority Boulder County Housing Authority NREL Recommendations Lead to 153 Net Zero Energy Residences Expertise and Knowledge NREL offers technical assistance and project development support by working closely with industry partners to research, develop, and deploy advanced building technologies. Examples include: Building Energy Audits and Assessments NREL provides technical assistance, guidelines, checklists, and data

264

A conceptual framework for the evaluation of cost-effectiveness of projects to reduce GHG emissions and sequester carbon  

SciTech Connect

This paper proposes a conceptual framework for evaluating the cost of projects to reduce atmospheric greenhouse gases (GHGs). The evaluation of cost-effectiveness should account for both the timing of carbon emissions and the damage caused by the atmospheric stock of carbon. We develop a conceptual basis to estimate the cost-effectiveness of projects in terms of the cost of reducing atmospheric carbon (CRAC) and other GHGs. CRAC accounts for the economic discount rate, alternative functional forms of the shadow price, the residence period of carbon in the atmosphere, and the multiple monetary benefits of projects. The last item is of particular importance to the developing countries.

Sathaye, J.; Norgaard, R.; Makundi, W.

1993-07-01T23:59:59.000Z

265

Intelligent Transportation Systems Deployment Analysis System | Open Energy  

Open Energy Info (EERE)

Intelligent Transportation Systems Deployment Analysis System Intelligent Transportation Systems Deployment Analysis System Jump to: navigation, search Tool Summary Name: Intelligent Transportation Systems Deployment Analysis System Agency/Company /Organization: Cambridge Systematics Sector: Energy Focus Area: Transportation Resource Type: Software/modeling tools Website: idas.camsys.com/ Country: United States Northern America References: http://idas.camsys.com/ The ITS Deployment Analysis System (IDAS) is software developed by the Federal Highway Administration that can be used in planning for Intelligent Transportation System (ITS) deployments. State, regional, and local planners can use IDAS to estimate the benefits and costs of ITS investments - which are either alternatives to or enhancements of traditional highway

266

PNNL Technology Planning and Deployment Group | Open Energy Information  

Open Energy Info (EERE)

Deployment Group Deployment Group Jump to: navigation, search Logo: Technology Planning and Deployment Name Technology Planning and Deployment Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tpd.pnl.gov/ References Technology Planning and Development [1] "The Technology Planning & Deployment (TP&D) group is part of the Pacific Northwest National Laboratory's (PNNL's) Energy and Environment Directorate. TP&D staff provide customers with a unique combination of experience and expertise with capabilities in economics and regulatory analysis, systems engineering, marketing, technology adaptation and application, policy analysis, and project management."[1] Primary Services Building and facilities energy utilization assessments, audits,

267

IEA Renewable Energy Technology Deployment | Open Energy Information  

Open Energy Info (EERE)

IEA Renewable Energy Technology Deployment IEA Renewable Energy Technology Deployment Jump to: navigation, search Name IEA Renewable Energy Technology Deployment Agency/Company /Organization International Energy Agency - Renewable Energy Technology Deployment Implementing Agreement Sector Energy Focus Area Renewable Energy Topics Policies/deployment programs Resource Type Publications Website http://www.iea-retd.org Country Canada, Norway, Denmark, Germany, Netherlands, France, United Kingdom, Ireland, Japan Northern America, Northern Europe, Northern Europe, Western Europe, Western Europe, Western Europe, Northern Europe, Northern Europe, Eastern Asia References RETD Homepage [1] This article is a stub. You can help OpenEI by expanding it. "RETD Implementing Agreement is one of the key outcomes from the

268

Cost Effective Recovery of Low-TDS Frac Flowback Water for Re-use  

E-Print Network (OSTI)

?This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.? The project goal was to develop a cost-effective water recovery process to reduce the costs and environmental impact of shale gas production. This effort sought to develop both a flowback water pretreatment process and a membrane-based partial demineralization process for the treatment of the low-Total Dissolved Solids (TDS) portion of the flowback water produced during hydrofracturing operations.

Harish R. Acharya; Claire Henderson; Hope Matis; Hareesh Kommepalli; Brian Moore; Hua Wang

2011-01-01T23:59:59.000Z

269

COST-EFFECTIVE CONTROL OF NOX WITH INTEGRATED ULTRA LOW-NOX BURNERS AND SNCR  

Science Conference Proceedings (OSTI)

The objective of this project is to develop an environmentally acceptable and cost-effective NO{sub x} control system that can achieve less than 0.15 lb NO{sub x}/10{sup 6} Btu for a wide range of coal-burning commercial boilers. The system will be comprised of an ultra low-NO{sub x} PC burner technology plus a urea-based, selective non-catalytic reduction (SNCR) system. In addition to the above stated NO{sub x} limit of 0.15 lb NO{sub x}/10{sup 6} Btu, ammonia (NH{sub 3}) slip levels will be targeted below 5 ppmV for commercial units. Testing will be performed in the 100 million Btu/hr Clean Environment Development Facility (CEDF) in Alliance, Ohio. Finally, by amendment action, a limited mercury measurement campaign was conducted to determine if the partitioning and speciation of mercury in the flue gas from a Powder River Basin coal is affected by the addition of Chlorides to the combustion zone.

Hamid Farzan

2001-10-01T23:59:59.000Z

270

A framework for improving the cost-effectiveness of DSM program evaluations  

SciTech Connect

The prudence of utility demand-side management (DSM) investments hinges on their performance, yet evaluating performance is complicated because the energy saved by DSM programs can never be observed directly but only inferred. This study frames and begins to answer the following questions: (1) how well do current evaluation methods perform in improving confidence in the measurement of energy savings produced by DSM programs; (2) in view of this performance, how can limited evaluation resources be best allocated to maximize the value of the information they provide? The authors review three major classes of methods for estimating annual energy savings: tracking database (sometimes called engineering estimates), end-use metering, and billing analysis and examine them in light of the uncertainties in current estimates of DSM program measure lifetimes. The authors assess the accuracy and precision of each method and construct trade-off curves to examine the costs of increases in accuracy or precision. Several approaches for improving evaluations for the purpose of assessing program cost effectiveness are demonstrated. The methods can be easily generalized to other evaluation objectives, such as shared savings incentive payments.

Sonnenblick, R.; Eto, J.

1995-09-01T23:59:59.000Z

271

Regional Energy Deployment System (ReEDS)  

SciTech Connect

The Regional Energy Deployment System (ReEDS) is a deterministic optimization model of the deployment of electric power generation technologies and transmission infrastructure throughout the contiguous United States into the future. The model, developed by the National Renewable Energy Laboratory's Strategic Energy Analysis Center, is designed to analyze the critical energy issues in the electric sector, especially with respect to potential energy policies, such as clean energy and renewable energy standards or carbon restrictions. ReEDS provides a detailed treatment of electricity-generating and electrical storage technologies and specifically addresses a variety of issues related to renewable energy technologies, including accessibility and cost of transmission, regional quality of renewable resources, seasonal and diurnal generation profiles, variability of wind and solar power, and the influence of variability on the reliability of the electrical grid. ReEDS addresses these issues through a highly discretized regional structure, explicit statistical treatment of the variability in wind and solar output over time, and consideration of ancillary services' requirements and costs.

Short, W.; Sullivan, P.; Mai, T.; Mowers, M.; Uriarte, C.; Blair, N.; Heimiller, D.; Martinez, A.

2011-12-01T23:59:59.000Z

272

Integrated assessment of dispersed energy resources deployment  

SciTech Connect

The goal of this work is to create an integrated framework for forecasting the adoption of distributed energy resources (DER), both by electricity customers and by the various institutions within the industry itself, and for evaluating the effect of this adoption on the power system, particularly on the overall reliability and quality of electrical service to the end user. This effort and follow on contributions are intended to anticipate and explore possible patterns of DER deployment, thereby guiding technical work on microgrids towards the key technical problems. An early example of this process addressed is the question of possible DER adopting customer disconnection. A deployment scenario in which many customers disconnect from their distribution company (disco) entirely leads to a quite different set of technical problems than a scenario in which customers self generate a significant share or all of their on-site electricity requirements and additionally buy and sell energy and ancillary services (AS) locally and/or into wider markets. The exploratory work in this study suggests that the economics under which customers disconnect entirely are unlikely.

Marnay, Chris; Blanco, Raquel; Hamachi, Kristina S.; Kawaan, Cornelia P.; Osborn, Julie G.; Rubio, F. Javier

2000-06-01T23:59:59.000Z

273

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

274

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

275

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

276

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

277

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

278

Alternative Fuels Data Center: Alternative Fuel Development and Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Alternative Fuel Alternative Fuel Development and Deployment Grants to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Development and Deployment Grants on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

279

Regional Energy Deployment System (ReEDS) | Open Energy Information  

Open Energy Info (EERE)

Regional Energy Deployment System (ReEDS) Regional Energy Deployment System (ReEDS) (Redirected from Regional Energy Deployment System) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Regional Energy Deployment System Agency/Company /Organization: NREL Sector: Energy Topics: Pathways analysis, Resource assessment Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/analysis/reeds/ OpenEI Keyword(s): EERE tool, Regional Energy Deployment System, ReEDS References: Regional Energy Deployment System (ReEDS) Web site[1] Regional Energy Deployment System (ReEDS) is a multiregional, multitimeperiod, Geographic Information System (GIS), and linear programming model of capacity expansion in the electric sector of the United States. The model, developed by NREL's Strategic Energy Analysis

280

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Zero Emission Vehicle Zero Emission Vehicle (ZEV) Deployment Support to someone by E-mail Share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Facebook Tweet about Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Twitter Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Google Bookmark Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Delicious Rank Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on Digg Find More places to share Alternative Fuels Data Center: Zero Emission Vehicle (ZEV) Deployment Support on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

282

Michigan State Code Adoption Analysis: Cost-Effectiveness of Lighting Requirements - ASHRAE/IESNA 90.1-2004  

SciTech Connect

This report documents PNNL's analysis of the potential energy effect and cost-effectiveness of the lighting requirements in ASHRAE/IESNA 90.1-2004 if this energy code is adopted in the state of Michigan, instead of the current standard.

Richman, Eric E.

2006-09-29T23:59:59.000Z

283

The cost effectiveness of reducing public exposure to carcinogens in Harris County by a abating chemical plant emissions  

SciTech Connect

The work examines the engineering reasonableness and the cost effectiveness of reducing public exposure to carcinogens n ambient air by abating emissions of organic chemicals in waste gas streams from chemical plants in Harris County, Texas, which contains the large chemical manufacturing complex in the Houston ship channel areas. The work also examined the cost effectiveness of reducing public exposure through changing the way vent streams are released to the atmosphere. The achievable exposure reductions are estimated by use of 1980 census data and of ambient concentration estimates. The ambient concentration estimates are calculated using the Texas Climatological Model Version 2 (TCM-2) and publicly available emissions inventory collected by the Texas Air Control Board. The TCM-2 is based on the steady state Gaussian plume hypothesis, Briggs plume rise formations, Pasquill-Gifford dispersion coefficient approximations, and first order pollutant decay. The cost estimates rely on published studies and on the waste gas stream parameters of the chemical plant vents. The cost effectiveness results are compared with the cost effectiveness of controls typically applied to new sources of volatile organic compounds (VOCs) that are controlled because of their contribution to ozone air pollution, not because of the carcinogenicity of their emissions.

Price, J.H. Jr.

1989-01-01T23:59:59.000Z

284

A cost-effective differential mobility analyzer (cDMA) for multiple DMA column applications  

Science Conference Proceedings (OSTI)

In aerosol research and applications, a differential mobility analyzer (DMA) is now considered the standard tool for sizing and classifying monodisperse particles in the sub-micrometer and nanometer size ranges. However, DMA application at the pilot or industrial production scale remains infeasible because of the low mass throughput. A simple way to scale up DMA operation is to use multiple DMA columns. The manufacture and maintenance costs of existing DMAs, however, limit such a scale-up. A cost-effective DMA column (named cDMA) has thus been developed in this work to address the above issue. To reduce its manufacturing cost, the prototype was constructed using parts requiring little machining. The cDMA column was also designed for easy maintenance and easy variation of the classification length for any application-specified size range. In this study, prototypes with two particle classification lengths, 1.75 and 4.50 cm, were constructed and their performance was experimentally evaluated at sheath-to-aerosol flowrate ratios of 5:1, 10:1, and 15:1 via the tandem DMA (TDMA) technique. It was concluded that both prototype cDMAs, operated at a sheath/aerosol flowrate ratio less than 15:1 and with a polydisperse aerosol flowrate of 1.0 lpm, achieved sizing resolution comparable to that offered by Nano-DMA. The longer cDMA had comparable transmission efficiency to that of Nano-DMA, and the shorter cDMA exceeded the performance of Nano-DMA. Hence, the cDMA with the shorter (1.75 cm) classification length is better suited for the characterization of macromolecular samples.

Mei, F.; Fu, H.; Chen, D.-R.

2011-05-04T23:59:59.000Z

285

Design and Build- Cost-Effective Energy Conservation: An Opportunity for the Competitive Market  

E-Print Network (OSTI)

This paper expands on concepts presented at the World Energy Congress and DA/DSM earlier this year. In the light of recent developments I have changed the title of the paper, merged some of the issues and updated my comments. The entire energy industry is in a state of flux in anticipation of the deregulation of the electricity supply industry. Utilities are, right now, creating subsidiary companies which will take advantage of the new competitive markets. These companies will trade as Energy Service Providers, offering a wide range of products, including conservation. They will focus on the bills the customers pay, not solely on the rates for energy. As this transition occurs the current methods for implementing energy conservation will be closely examined. We will see some of the aberrant and expensive practices created within a closely regulated Demand Side Management environment disappear. They will be replaced by traditional methodologies used in the construction industry. This paper examined the opportunity for those construction models in the competitive energy supply industry. I contend that an adaptation of the design and build method of construction offers many of the answers needed for cost effective implementation. The Design & Build contract has most of the key features needed in an energy conservation project. It is a proven method, understood by all participants, and it has inherent flexibility, needed to provide the building owner with the optimum solution for the building. Concentrating on the design of comprehensive Energy Conservation Measures (ECM), the D&B firm augments the strengths of its customers, conservation developers. The concepts offered herein are largely speculative; intended to create dialogue on the opportunities suggested. This document is not definitive. Now, can the industry make this work?

McGeown, D. I.

1995-04-01T23:59:59.000Z

286

Cost-effective applications of photovoltaics for electric utilities: An overview  

DOE Green Energy (OSTI)

Cost targets for the large-scale entry of photovoltaic (PV) systems keep moving, subject to the vagaries of global oil prices and the economic health of the world. Over the last four decades since a practical PV device was announced, costs have come down by a factor of 20 or more and this downward trend is expected to continue, albeit at a slower pace. Simultaneously, conversion efficiencies have nearly tripled. There are many applications today for which PV is cost-effective. In recognition of this, utility interest in PV is increasing and this is manifested by projects such as PVUSA and Central and South West`s renewable resource development effort. While no major technical barriers for the entry of PV systems have been uncovered, several key issues such as power quality, system reliability, ramp rates, spinning reserve requirements, and misoperation of protection schemes will have to be dealt with as the penetration of this technology increases. PV is still in the evolutionary phase and is expected to grow for several decades to come. Fueled by environmental considerations, interest in PV is showing a healthy rise both in the minds of the public and in the planning realms of the electric power community. In recognition of this, the Energy Development Subcommittee of the IEEE Energy Development and Power Generation Committee organized a Panel Session on photovoltaics applications at the 1993 International Joint Power Generation Conference held in Kansas City, Missouri. Summaries of the four presentations are assembled here for the benefit of the readers of this Review.

Bigger, J.E. [Electric Power Research Inst., Palo Alto, CA (United States)

1993-12-31T23:59:59.000Z

287

NREL: Technology Deployment - Project Success Stories  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Success Stories Project Success Stories NREL's technology deployment best practices, project support, and technical assistance, and technology acceleration activities are resulting in successful renewable energy and energy efficiency implementation in numerous locations. View success stories highlighting NREL's work with: Cities and Communities Greensburg, Kansas Greensburg: Photo of wind turbines in a green field. An International Inspiration for Green Disaster Recovery For 3 years after a devastating tornado struck Greensburg, Kansas, NREL technical experts helped the town rebuild as a model green community completely powered by a 12.5 megawatt wind farm and surrounded by the highest per-capita concentration of LEED-certified buildings in the United States-13 of which are saving $200,000 annually. Learn more.

288

NREL: Technology Deployment - Solar Technical Assistance Team  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Assistance Team Technical Assistance Team Strategic Sequencing for State Distributed PV Policies: A Quantitative Analysis of Policy Impacts and Interactions Recent NREL analysis of state policies revealed that the sequence of policy implementation can accelerate solar photovoltaic (PV) markets-and that policy change doesn't have to be costly. Download the full report or summary to learn more, or view the webinar. The Solar Technical Assistance Team (STAT) gathers NREL solar technology and deployment experts to provide information on solar policies, regulations, financing, and other issues for state and local government decision makers. The team provides a variety of technical assistance, including: Quick Response. For state and local governments that require a fast turnaround in response to a time-sensitive question or expert testimony on

289

NREL: Technology Deployment - Project Development Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Development Model Project Development Model NREL developed the Project Development Model to evaluate the risks and investment decisions required for successful renewable energy project development. The two-phase iterative model includes elements in project fundamentals and project development based off commercial project development practices supported by tools such as pro formas and checklists. Project Fundamentals or BEPTC(tm) Renewable Energy Project Development Tool For help with the BEPTC phase of your project, check out the Renewable Energy Project Development Tool, developed by NREL for U.S. Department of Energy's Community Renewable Energy Deployment effort. The tool helps you quickly establish the key motivators and feasibility of your project. Strong project fundamentals and an understanding of how a project fits

290

On developing a fast, cost-effective and non-invasive method to derive data center thermal maps  

Science Conference Proceedings (OSTI)

Ongoing research has demonstrated the potential benefits of thermal-aware load placement in data centers to both reduce cooling costs and component failure rates. However, thermal-aware load placement techniques have not been widely deployed in existing ...

Michael Jonas; Georgios Varsamopoulos; Sandeep K. S. Gupta

2007-09-01T23:59:59.000Z

291

Regional Energy Deployment System (ReEDS) | Open Energy Information  

Open Energy Info (EERE)

Regional Energy Deployment System (ReEDS) Regional Energy Deployment System (ReEDS) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Regional Energy Deployment System Agency/Company /Organization: NREL Sector: Energy Topics: Pathways analysis, Resource assessment Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/analysis/reeds/ OpenEI Keyword(s): EERE tool, Regional Energy Deployment System, ReEDS References: Regional Energy Deployment System (ReEDS) Web site[1] Regional Energy Deployment System (ReEDS) is a multiregional, multitimeperiod, Geographic Information System (GIS), and linear programming model of capacity expansion in the electric sector of the United States. The model, developed by NREL's Strategic Energy Analysis Center (SEAC), is designed to conduct analysis of the critical energy

292

SRNL Deploys Innovative Radiation Mapping Device | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SRNL Deploys Innovative Radiation Mapping Device SRNL Deploys Innovative Radiation Mapping Device SRNL Deploys Innovative Radiation Mapping Device November 3, 2011 - 12:00pm Addthis The Savannah River National Laboratory completed successful deployments of the RadBall, a gamma radiation-mapping device. The Savannah River National Laboratory completed successful deployments of the RadBall, a gamma radiation-mapping device. AIKEN, S.C. - The Savannah River National Laboratory (SRNL), EM's national lab, has made strides with remote technology designed to reduce worker exposure while measuring radiation in contaminated areas. uilding on a successful collaboration with the United Kingdom's National Nuclear Laboratory, SRNL completed successful deployments of RadBall, a gamma radiation-mapping device, after testing the technology. The device

293

Leading the Nation in Clean Energy Deployment (Fact Sheet), Integrated  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Leading the Nation in Clean Energy Deployment (Fact Sheet), Leading the Nation in Clean Energy Deployment (Fact Sheet), Integrated Deployment: Overview of Projects (ID) Leading the Nation in Clean Energy Deployment (Fact Sheet), Integrated Deployment: Overview of Projects (ID) This document summarizes key efforts and projects that are part of the DOE/NREL Integrated Deployment effort to integrated energy efficiency and renewable energy technologies in cities, states, island locations, and communities around the world. id_overview.pdf More Documents & Publications A Tale of Two Cities: Greensburg Rebuilds as a National Model for Green Communities (Fact Sheet), Energy Efficiency & Renewable Energy (EERE) Rising Above the Water: New Orleans Implements Energy Efficiency and Sustainability Practices Following Hurricanes Katrina and Rita (Fact

294

A Strategic Framework for SMR Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Strategic Framework for SMR Deployment A Strategic Framework for SMR Deployment A Strategic Framework for SMR Deployment A strategy for the successful deployment of small modular reactors (SMRs) must consider what the goals of deployment would entail, the challenges to achieving these goals and the approach to overcome those challenges. This paper will attempt to offer a framework for addressing these important issues at the outset of the program. The deployment of SMRs will be realized by private power companies making the decision to purchase and operate SMRs from private vendors. The government role is to set national priorities for clean energy and national security and create incentives to achieve them. The policy tools the government may choose to use to advance this technology in support of these national objectives will evolve as SMRs

295

CHARM COST-EFFECTIVE HIGH-EFFICIENCY ADVANCED REFORMING MODULE FINAL TECHNICAL REPORT  

Science Conference Proceedings (OSTI)

Background Creation of a hydrogen infrastructure is an important prerequisite of widespread fuel cell commercialization, especially for the automotive market. Hydrogen is an attractive fuel since it offers an opportunity to replace petroleum-based fuels, but hydrogen occurs naturally only in chemical compounds like water or hydrocarbons that must be chemically converted to produce it. While an ultimate goal is to produce hydrogen through renewable energy sources, steam methane reforming (SMR) of natural gas is currently the most economical solution to initiate the transition to a hydrogen economy. Centralized hydrogen generation using large industrial SMR plants is already in place to serve customers. Yet, because of the weight and size of cylinders needed to contain hydrogen gas or liquid, transportation of hydrogen may only be economical for short distances. Consequently, distributed natural gas reforming, which trades off the economies of scale of large plants for simplified delivery logistics, is an attractive alternative that could address immediate problems with the lack of hydrogen infrastructure.

Pollica, Darryl; Cross, James C; Sharma, Atul; Shi, Yanlong; Clawson, Lawrence; O'Brien, Chris; Gilhooly, Kara; Kim, Changsik; Quet, Pierre-Francois

2009-09-02T23:59:59.000Z

296

On the Use of GPUs in Realizing Cost-Effective Distributed RAID  

SciTech Connect

The exponential growth in user and application data entails new means for providing fault tolerance and protection against data loss. High Performance Computing (HPC) storage systems, which are at the forefront of handling the data deluge, typically employ hardware RAID at the backend. However, such solutions are costly, do not ensure end-to-end data integrity, and can become a bottleneck during data reconstruction. In this paper, we design an innovative solution to achieve a flexible, fault-tolerant, and high-performance RAID-6 solution for a parallel file system (PFS). Our system utilizes low-cost, strategically placed GPUs - both on the client and server sides - to accelerate parity computation. In contrast to hardware-based approaches, we provide full control over the size, length and location of a RAID array on a per file basis, end-to-end data integrity checking, and parallelization of RAID array reconstruction. We have deployed our system in conjunction with the widely-used Lustre PFS, and show that our approach is feasible and imposes acceptable overhead.

Khasymski, Aleksandr [Virginia Polytechnic Institute and State University (Virginia Tech); Rafique, Mustafa [Qatar Foundation; Butt, Ali R [Virginia Polytechnic Institute and State University (Virginia Tech); Vazhkudai, Sudharshan S [ORNL; Nikolopoulos, Dimitrios [Queen's University, Belfast

2012-01-01T23:59:59.000Z

297

Deployment of Forming and Welding Models to Industries through ...  

Science Conference Proceedings (OSTI)

Presentation Title, Deployment of Forming and Welding Models to Industries through High Performance Computing. Author(s), Yuping Yang, Hyunok Kim,...

298

China-International Industrial Energy Efficiency Deployment Project | Open  

Open Energy Info (EERE)

China-International Industrial Energy Efficiency Deployment Project China-International Industrial Energy Efficiency Deployment Project Jump to: navigation, search Name China-International Industrial Energy Efficiency Deployment Project Agency/Company /Organization United States Department of Energy (USDOE), Institute for Sustainable Communities (ISC), Lawrence Berkeley National Laboratory, Oak Ridge National Laboratory (ORNL), Alliance for Energy Efficient Economy (India), Confederation of Indian Industry Sector Energy Focus Area Industry Topics Implementation, Low emission development planning, Technology characterizations Program Start 2011 Program End 2013 Country China Eastern Asia References International Industrial Energy Efficiency Deployment Project[1] Overview China "China is prioritizing a low carbon, energy efficient economy and has

299

Community Renewable Energy Deployment Webinars | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Community Renewable Energy Deployment Webinars Community Renewable Energy Deployment Webinars Community Renewable Energy Deployment Webinars Community Renewable Energy Deployment (CommRE) Webinars provide information on successful community renewable energy projects, including the challenges and barriers faced during development. Find past webinars, and download presentations and supporting materials below. Past Webinars April 16, 2013: Community-Scale Anaerobic Digesters This webinar provided information on San Jose, California's, commercial-scale, high solids dry fermentation anaerobic digestion system, and the Forest County Potawatomi Community's anaerobic digester project. March 19, 2013: Renewable Energy Parks This webinar provided information on how two cities in Washington and New York integrated multiple renewable energy technologies to create renewable

300

Community Renewable Energy Deployment Projects | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment Projects Deployment Projects Community Renewable Energy Deployment Projects The selected DOE Community Renewable Energy Deployment (CommRE) projects receive technical assistance from DOE's National Renewable Energy Laboratory in the areas of concepts, best practices, planning, financial approaches, and policy guidance to help achieve specific goals. More than $20.5 million in total Recovery Act funding will be leveraged with approximately $167 million in local government and private industry funding to complete the following projects. City of Montpelier, Montpelier, Vermont Forest County Potawatomi Community, Milwaukee, Wisconsin Haxtun Wind, Phillips County, Colorado Sacramento Municipal Utility District, Sacramento, California University of California at Davis, Davis, California

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

International Industrial Energy Efficiency Deployment Project | Open Energy  

Open Energy Info (EERE)

Industrial Energy Efficiency Deployment Project Industrial Energy Efficiency Deployment Project Jump to: navigation, search Name International Industrial Energy Efficiency Deployment Project Agency/Company /Organization United States Department of Energy (USDOE), Institute for Sustainable Communities (ISC), Lawrence Berkeley National Laboratory, Oak Ridge National Laboratory (ORNL), Alliance for Energy Efficient Economy (India), Confederation of Indian Industry Sector Energy Focus Area Industry Topics Implementation, Low emission development planning, Technology characterizations Program Start 2011 Program End 2013 Country China, India Eastern Asia, Southern Asia References International Industrial Energy Efficiency Deployment Project[1] Overview China "China is prioritizing a low carbon, energy efficient economy and has

302

Strategies for the Commercialization & Deployment of GHG Intensity...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies & Practices This report examines strategies of commercializing and deploying energy technologies that reduce greenhouse gas intensity. CDStratCompleteReport116092.pd...

303

Related Deployment Efforts in New Orleans, Louisiana | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment Efforts in New Orleans, Louisiana In addition to focusing on rebuilding schools and homes with energy efficiency, New Orleans, Louisiana, is incorporating...

304

Evaluation of Stationary Fuel Cell Deployments, Costs, and Fuels (Presentation)  

SciTech Connect

This presentation summarizes NREL's technology validation of stationary fuel cell systems and presents data on number of deployments, system costs, and fuel types.

Ainscough, C.; Kurtz, J.; Peters, M.; Saur, G.

2013-10-01T23:59:59.000Z

305

A Buildings Module for the Stochastic Energy Deployment System  

E-Print Network (OSTI)

that SEDS does not address. Energy history may have turned aEnergy Deployment System (SEDS), which follows in a long history

Marnay, Chris

2008-01-01T23:59:59.000Z

306

Strategies to Finance Large-Scale Deployment of Renewable Energy...  

Open Energy Info (EERE)

Large-Scale Deployment of Renewable Energy Projects: An Economic Development and Infrastructure Approach Jump to: navigation, search Name Strategies to Finance Large-Scale...

307

Deploying Server-side File System Monitoring at NERSC  

E-Print Network (OSTI)

J. Shalf, and H. Wasserman. Nersc-6 workload analysis andDeploying Server-side File System Monitoring at NERSC AndrewUselton NERSC, Lawrence Berkeley National Laboratory

Uselton, Andrew

2009-01-01T23:59:59.000Z

308

State Support for Clean Energy Deployment: Lessons Learned for...  

NLE Websites -- All DOE Office Websites (Extended Search)

State Support for Clean Energy Deployment: Lessons Learned for Potential Future Policy Charles Kubert and Mark Sinclair Clean Energy States Alliance Montpelier, Vermont Subcontract...

309

NREL: Technology Deployment - Biopower and Waste-to-Energy Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

Opportunities, and Options for Advancing Bioenergy Waste-to-Energy Evaluation: U.S. Virgin Islands See all our publications Printable Version Technology Deployment Home...

310

NREL: Wind Research - Minimal Impacts Could Mean More Deployment...  

NLE Websites -- All DOE Office Websites (Extended Search)

and More The National Renewable Energy Laboratory's quarterly newsletter, Deployment and Market Transformation at NREL, features information and updates on selected NREL...

311

Strategies for the Commercialization & Deployment of GHG Intensity...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

examines strategies of commercializing and deploying energy technologies that reduce greenhouse gas intensity. CDStratCompleteReport116092.pdf More Documents & Publications...

312

An Analytical Framework for Long Term Policy for Commercial Deployment...  

Open Energy Info (EERE)

An Analytical Framework for Long Term Policy for Commercial Deployment and Innovation in Carbon Capture and Sequestration Technology in the United States Jump to: navigation,...

313

ProgramTopics Deployment Data | Open Energy Information  

Open Energy Info (EERE)

from "http:en.openei.orgwikiSpecial:SearchByPropertyProgramTopicsDeployment-20Data" Special pages About us Disclaimers Energy blogs Developer services OpenEI partners...

314

NETL: News Release - DOE, Industry Consortium Project Deploys...  

NLE Websites -- All DOE Office Websites (Extended Search)

4 , 2006 DOE, Industry Consortium Project Deploys New Stripper Well Tool Novel Technology Boosts Oil and Gas Production and Efficiency at 200 Sites Nationwide WASHINGTON, DC - A...

315

Characterization of Vertical Velocity and Drop Size Distribution Parameters in Widespread Precipitation at ARM Facilities  

Science Conference Proceedings (OSTI)

Extended, high-resolution measurements of vertical air motion and median volume drop diameter D0 in widespread precipitation from three diverse Atmospheric Radiation Measurement Program (ARM) locations [Lamont, Oklahoma, Southern Great Plains site ...

Scott E. Giangrande; Edward P. Luke; Pavlos Kollias

2012-02-01T23:59:59.000Z

316

Water Vapor Transport Paths and Accumulation during Widespread Snowfall Events in Northeastern China  

Science Conference Proceedings (OSTI)

This study aims to identify the distinct characteristics of water vapor transport (WVT) and its role in supplying moisture for widespread snowfall (WS) events in northeastern China (NEC). Fifty WS events in NEC were selected based on cumulative ...

Bo Sun; Huijun Wang

2013-07-01T23:59:59.000Z

317

Inexpensive technologies enabling widespread utilization of image-predicated cell sorting  

E-Print Network (OSTI)

The most mature, widespread sorting technology, fluorescence-activated cell sorting (FACS), offers high throughput and sorts predicated on a wide range of phenotypes that can be conveyed through average cellular fluorescence ...

Kova?, Joseph (Joseph R.)

2010-01-01T23:59:59.000Z

318

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

NLE Websites -- All DOE Office Websites (Extended Search)

2972 2972 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007 BA Thornton SA Loper V Mendon MA Halverson EE Richman MI Rosenberg M Myer DB Elliott November 2013 PNNL-22972 National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007 BA Thornton SA Loper V Mendon MA Halverson EE Richman MI Rosenberg M Myer DB Elliott November 2013 Prepared for The U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 iii Executive Summary Pacific Northwest National Laboratory (PNNL) prepared this analysis for the U.S. Department of

319

On-Board Vehicle, Cost Effective Hydrogen Enhancement Technology for Transportation PEM Fuel Cells  

DOE Green Energy (OSTI)

Final Report of On-Board Vehicle, Cost Effective Hydrogen Enhancement Technology for Transportation PEM Fuel Cells. The objective of this effort was to technologically enable a compact, fast start-up integrated Water Gas Shift-Pd membrane reactor for integration into an On Board Fuel Processing System (FPS) for an automotive 50 kWe PEM Fuel Cell (PEM FC). Our approach was to: (1) use physics based reactor and system level models to optimize the design through trade studies of the various system design and operating parameters; and (2) synthesize, characterize and assess the performance of advanced high flux, high selectivity, Pd alloy membranes on porous stainless steel tubes for mechanical strength and robustness. In parallel and not part of this program we were simultaneously developing air tolerant, high volumetric activity, thermally stable Water Gas Shift catalysts for the WGS/membrane reactor. We identified through our models the optimum WGS/membrane reactor configuration, and best Pd membrane/FPS and PEM FC integration scheme. Such a PEM FC power plant was shown through the models to offer 6% higher efficiency than a system without the integrated membrane reactor. The estimated FPS response time was < 1 minute to 50% power on start-up, 5 sec transient response time, 1140 W/L power density and 1100 W/kg specific power with an estimated production cost of $35/kW. Such an FPS system would have a Catalytic Partial Oxidation System (CPO) rather than the slower starting Auto-Thermal Reformer (ATR). We found that at optimum WGS reactor configuration that H{sub 2} recovery efficiencies of 95% could be achieved at 6 atm WGS pressure. However optimum overall fuel to net electrical efficiency ({approx}31%) is highest at lower fuel processor efficiency (67%) with 85% H{sub 2} recovery because less parasitic power is needed. The H{sub 2} permeance of {approx}45 m{sup 3}/m{sup 2}-hr-atm{sup 0.5} at 350 C was assumed in these simulations. In the laboratory we achieved a H{sub 2} permeance of 50 m{sup 3}/(m{sup 2}-hr-atm{sup 0.5}) with a H{sub 2}/N{sub 2} selectivity of 110 at 350 C with pure Pd. We also demonstrated that we could produce Pd-Ag membranes. Such alloy membranes are necessary because they aren't prone to the Pd-hydride {alpha}-{beta} phase transition that is known to cause membrane failure in cyclic operation. When funding was terminated we were on track to demonstrated Pd-Ag alloy deposition on a nano-porous ({approx}80 nm) oxide layer supported on porous stainless steel tubing using a process designed for scale-up.

Thomas H. Vanderspurt; Zissis Dardas; Ying She; Mallika Gummalla; Benoit Olsommer

2005-12-30T23:59:59.000Z

320

Final Technical Report Power through Policy: "Best Practices" for Cost-Effective Distributed Wind  

SciTech Connect

Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The project's final products include the Distributed Wind Policy Comparison Tool, found at www.windpolicytool.org, and its accompanying documentation: Distributed Wind Policy Comparison Tool Guidebook: User Instructions, Assumptions, and Case Studies. With only two initial user inputs required, the Policy Tool allows users to adjust and test a wide range of policy-related variables through a user-friendly dashboard interface with slider bars. The Policy Tool is populated with a variety of financial variables, including turbine costs, electricity rates, policies, and financial incentives; economic variables including discount and escalation rates; as well as technical variables that impact electricity production, such as turbine power curves and wind speed. The Policy Tool allows users to change many of the variables, including the policies, to gauge the expected impacts that various policy combinations could have on the cost of energy (COE), net present value (NPV), internal rate of return (IRR), and the simple payback of distributed wind projects ranging in size from 2.4 kilowatts (kW) to 100 kW. The project conducted case studies to demonstrate how the Policy Tool can provide insights into 'what if' scenarios and also allow the current status of incentives to be examined or defended when necessary. The ranking of distributed wind state policy and economic environments summarized in the attached report, based on the Policy Tool's default COE results, highlights favorable market opportunities for distributed wind growth as well as market conditions ripe for improvement. Best practices for distributed wind state policies are identified through an evaluation of their effect on improving the bottom line of project investments. The case studies and state rankings were based on incentives, power curves, and turbine pricing as of 2010, and may not match the current results from the Policy Tool. The Policy Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth). It also allows policymakers to determine the impact of policy options, addressing market challenges identified in the U.S. DOE's '20% Wind Energy by 2030' report and helping to meet COE targets. In providing a simple and easy-to-use policy comparison tool that estimates financial performance, the Policy Tool and guidebook are expected to enhance market expansion by the small wind industry by increasing and refining the understanding of distributed wind costs, policy best practices, and key market opportunities in all 50 states. This comprehensive overview and customized software to quickly calculate and compare policy scenarios represent a fundamental step in allowing policymakers to see how their decisions impact the bottom line for distributed wind consumers, while estimating the relative advantages of different options available in their policy toolboxes. Interested stakeholders have suggested numerous ways to enhance and expand the initial effort to develop an even more user-friendly Policy Tool and guidebook, including the enhancement and expansion of the current tool, and conducting further analysis. The report and the project's Guidebook include further details on possible next steps. NREL Report No. BK-5500-53127; DOE/GO-102011-3453.

Rhoads-Weaver, Heather; Gagne, Matthew; Sahl, Kurt; Orrell, Alice; Banks, Jennifer

2012-02-28T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Power through Policy: "Best Practices" for Cost-Effective Distributed Wind  

DOE Green Energy (OSTI)

Power through Policy: 'Best Practices' for Cost-Effective Distributed Wind is a U.S. Department of Energy (DOE)-funded project to identify distributed wind technology policy best practices and to help policymakers, utilities, advocates, and consumers examine their effectiveness using a pro forma model. Incorporating a customized feed from the Database of State Incentives for Renewables and Efficiency (DSIRE), the Web-based Distributed Wind Policy Comparison Tool (Policy Tool) is designed to assist state, local, and utility officials in understanding the financial impacts of different policy options to help reduce the cost of distributed wind technologies. The project's final products include the Distributed Wind Policy Comparison Tool, found at www.windpolicytool.org, and its accompanying documentation: Distributed Wind Policy Comparison Tool Guidebook: User Instructions, Assumptions, and Case Studies. With only two initial user inputs required, the Policy Tool allows users to adjust and test a wide range of policy-related variables through a user-friendly dashboard interface with slider bars. The Policy Tool is populated with a variety of financial variables, including turbine costs, electricity rates, policies, and financial incentives; economic variables including discount and escalation rates; as well as technical variables that impact electricity production, such as turbine power curves and wind speed. The Policy Tool allows users to change many of the variables, including the policies, to gauge the expected impacts that various policy combinations could have on the cost of energy (COE), net present value (NPV), internal rate of return (IRR), and the simple payback of distributed wind projects ranging in size from 2.4 kilowatts (kW) to 100 kW. The project conducted case studies to demonstrate how the Policy Tool can provide insights into 'what if' scenarios and also allow the current status of incentives to be examined or defended when necessary. The ranking of distributed wind state policy and economic environments summarized in the attached report, based on the Policy Tool's default COE results, highlights favorable market opportunities for distributed wind growth as well as market conditions ripe for improvement. Best practices for distributed wind state policies are identified through an evaluation of their effect on improving the bottom line of project investments. The case studies and state rankings were based on incentives, power curves, and turbine pricing as of 2010, and may not match the current results from the Policy Tool. The Policy Tool can be used to evaluate the ways that a variety of federal and state policies and incentives impact the economics of distributed wind (and subsequently its expected market growth). It also allows policymakers to determine the impact of policy options, addressing market challenges identified in the U.S. DOE's '20% Wind Energy by 2030' report and helping to meet COE targets. In providing a simple and easy-to-use policy comparison tool that estimates financial performance, the Policy Tool and guidebook are expected to enhance market expansion by the small wind industry by increasing and refining the understanding of distributed wind costs, policy best practices, and key market opportunities in all 50 states. This comprehensive overview and customized software to quickly calculate and compare policy scenarios represent a fundamental step in allowing policymakers to see how their decisions impact the bottom line for distributed wind consumers, while estimating the relative advantages of different options available in their policy toolboxes. Interested stakeholders have suggested numerous ways to enhance and expand the initial effort to develop an even more user-friendly Policy Tool and guidebook, including the enhancement and expansion of the current tool, and conducting further analysis. The report and the project's Guidebook include further details on possible next steps. NREL Report No. BK-5500-53127; DOE/GO-102011-3453.

Rhoads-Weaver, Heather; Gagne, Matthew; Sahl, Kurt; Orrell, Alice; Banks, Jennifer

2012-02-28T23:59:59.000Z

322

Best Practice Guidelines for Deploying NAS Energy Storage Systems  

Science Conference Proceedings (OSTI)

The report was developed to provide guidelines for a utility to consider when deploying a sodium sulfur (NAS) battery system in a distribution network. Two utilities have completed NAS battery deployments in load peak-shaving applications and several other applications are currently in process.

2008-12-23T23:59:59.000Z

323

Loose Coupling and Healthcare Organizations: Deployment Strategies for Groupware  

Science Conference Proceedings (OSTI)

Healthcare organizations are often organized in a modular, loosely coupled fashion where separate and semi-autonomous work units specialize in different areas of care delivery. This partitioning allows each unit to adapt to emerging practice standards ... Keywords: deployment planning, groupware deployment, healthcare, human service organizations, loose coupling

David Pinelle; Carl Gutwin

2006-12-01T23:59:59.000Z

324

Application Deployment over Heterogeneous Grids using Distributed Ant  

E-Print Network (OSTI)

Application Deployment over Heterogeneous Grids using Distributed Ant Wojtek Goscinski and David in a secure, distributed, environment [2]. How- ever, a significant, unaddressed, challenge for Grid computing an automated applica- tion deployment system with a user-oriented approach, Distributed Ant (DistAnt) [3

Abramson, David

325

Utility-Scale Smart Meter Deployments, Plans & Proposals  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

edisonfoundation.net/IEE edisonfoundation.net/IEE Utility-Scale Smart Meter Deployments, Plans & Proposals April 2010 Utility State Target Number of Meters Notes Resources AEP 1 IN, KY, MI, OH, OK, TX, VA, WV 5,000,000 AEP plans on deploying smart meters to all customers within their service territory and have deployed 10,000 meters to customers in South Bend, IN, and are presently deploying another 700,000 to AEP-Texas customers. Timing for the remaining deployments will depend on specific conditions in each of the seven operating company subsidiaries. AEP Corporate Sustainability Report 2009 2 Allegheny Power MD, PA, WV 700,000 Allegheny launched pilots in Morgantown, WV and Urbana, MD to test smart meters and thermostats (1,140 meters installed). In PA, Act 129 (2008)

326

A Development Path to the Efficient and Cost-Effective Bulk Storage of Electrical Energy  

SciTech Connect

Efficient and cost-effective means for storing electrical energy is becoming an increasing need in our electricity-oriented society. For example, for electric utilities an emerging need is for distributed storage systems, that is, energy storage at substations, at solar or wind-power sites, or for load-leveling at the site of major consumers of their electricity. One of the important consequences of distributed storage for the utilities would be the reduction in transmission losses that would result from having a local source of load-leveling power. For applications such as these there are three criteria that must be satisfied by any new system that is developed to meet such needs. These criteria are: (1) high 'turn-around' efficiency, that is, high efficiency of both storing and recovering the stored energy in electrical form, (2) long service life (tens of years), with low maintenance requirements, and, (3) acceptably low capital cost. An additional requirement for these particular applications is that the system should have low enough standby losses to permit operation on a diurnal cycle, that is, storing the energy during a portion of a given day (say during sunlight hours) followed several hours later by its use during night-time hours. One answer to the spectrum of energy storage needs just outlined is the 'electromechanical battery'. The E-M battery, under development for several years at the Laboratory and elsewhere in the world, has the potential to solve the above energy storage problems in a manner superior to the electro-chemical battery in the important attributes of energy recovery efficiency, cycle lifetime, and amortized capital cost. An electromechanical battery is an energy storage module consisting of a high-speed rotor, fabricated from fiber composite, and having an integrally mounted generator/motor. The rotor operates at high speed, in vacuo, inside of a hermetically sealed enclosure, supported by a 'magnetic bearing', that is, a bearing that uses magnetic forces to support the rotor against gravity. Magnetic bearings are a virtual necessity for the E-M battery in order to achieve long service life, and to minimize frictional losses so that the battery does not lose its charge (run down) too rapidly. These considerations mitigate against the use of conventional mechanical bearings in the E-M battery for most applications. The Laboratory has pioneered the development of a new form of magnetic bearing to meet the special requirements of the E-M battery: the 'ambient-temperature passive magnetic bearing'. Simpler, and potentially much less expensive than the existing 'active' magnetic bearings (ones requiring electronic amplifiers and feedback circuits for their operation) development of the ambient-temperature passive magnetic bearing represents a technological breakthrough. Beyond its use in the E-M battery, the ambient-temperature magnetic bearing could have important applications in replacing conventional lubricated mechanical bearings in electrical machinery. Here the gains would be two-fold: reduced frictional losses, leading to higher motor efficiency, and, of equal importance, the elimination of the need for lubricants and for routine replacement of the bearings owing to mechanical wear. Thus an added benefit from a vigorous pursuit of our electromechanical battery concepts could be its impact on many other areas of industry where rotating machinery in need of improved bearings is involved. If perfected, passive magnetic bearings would seem to represent an almost ideal replacement for the mechanical bearings in many types of industrial electrical machinery. Returning to the issued of energy storage, the E-M battery itself has much to contribute in the area of improving the efficiency of stationary energy storage systems. For example, many electrical utilities utilize 'pumped hydro' energy storage systems as a means of improving the utilization of their 'base-load' power plants. That is, electrical energy is stored during off-

Post, R F

2009-09-24T23:59:59.000Z

327

A Development Path to the Efficient and Cost-Effective Bulk Storage of Electrical Energy  

DOE Green Energy (OSTI)

Efficient and cost-effective means for storing electrical energy is becoming an increasing need in our electricity-oriented society. For example, for electric utilities an emerging need is for distributed storage systems, that is, energy storage at substations, at solar or wind-power sites, or for load-leveling at the site of major consumers of their electricity. One of the important consequences of distributed storage for the utilities would be the reduction in transmission losses that would result from having a local source of load-leveling power. For applications such as these there are three criteria that must be satisfied by any new system that is developed to meet such needs. These criteria are: (1) high 'turn-around' efficiency, that is, high efficiency of both storing and recovering the stored energy in electrical form, (2) long service life (tens of years), with low maintenance requirements, and, (3) acceptably low capital cost. An additional requirement for these particular applications is that the system should have low enough standby losses to permit operation on a diurnal cycle, that is, storing the energy during a portion of a given day (say during sunlight hours) followed several hours later by its use during night-time hours. One answer to the spectrum of energy storage needs just outlined is the 'electromechanical battery'. The E-M battery, under development for several years at the Laboratory and elsewhere in the world, has the potential to solve the above energy storage problems in a manner superior to the electro-chemical battery in the important attributes of energy recovery efficiency, cycle lifetime, and amortized capital cost. An electromechanical battery is an energy storage module consisting of a high-speed rotor, fabricated from fiber composite, and having an integrally mounted generator/motor. The rotor operates at high speed, in vacuo, inside of a hermetically sealed enclosure, supported by a 'magnetic bearing', that is, a bearing that uses magnetic forces to support the rotor against gravity. Magnetic bearings are a virtual necessity for the E-M battery in order to achieve long service life, and to minimize frictional losses so that the battery does not lose its charge (run down) too rapidly. These considerations mitigate against the use of conventional mechanical bearings in the E-M battery for most applications. The Laboratory has pioneered the development of a new form of magnetic bearing to meet the special requirements of the E-M battery: the 'ambient-temperature passive magnetic bearing'. Simpler, and potentially much less expensive than the existing 'active' magnetic bearings (ones requiring electronic amplifiers and feedback circuits for their operation) development of the ambient-temperature passive magnetic bearing represents a technological breakthrough. Beyond its use in the E-M battery, the ambient-temperature magnetic bearing could have important applications in replacing conventional lubricated mechanical bearings in electrical machinery. Here the gains would be two-fold: reduced frictional losses, leading to higher motor efficiency, and, of equal importance, the elimination of the need for lubricants and for routine replacement of the bearings owing to mechanical wear. Thus an added benefit from a vigorous pursuit of our electromechanical battery concepts could be its impact on many other areas of industry where rotating machinery in need of improved bearings is involved. If perfected, passive magnetic bearings would seem to represent an almost ideal replacement for the mechanical bearings in many types of industrial electrical machinery. Returning to the issued of energy storage, the E-M battery itself has much to contribute in the area of improving the efficiency of stationary energy storage systems. For example, many electrical utilities utilize 'pumped hydro' energy storage systems as a means of improving the utilization of their 'base-load' power plants. That is, electrical energy is stored during off-peak hours for delivery at times of peak usage. These pumped hydro sys

Post, R F

2009-09-24T23:59:59.000Z

328

Mobility limited flip-based sensor networks deployment  

E-Print Network (OSTI)

An important phase of sensor networks operation is deployment of sensors in the field of interest. Critical goals during sensor networks deployment include coverage, connectivity, load balancing etc. A class of work has recently appeared, where mobility in sensors is leveraged to meet deployment objectives. In this paper, we study deployment of sensor networks using mobile sensors. The distinguishing feature of our work is that the sensors in our model have limited mobilities. More specifically, the mobility in the sensors we consider is restricted to a flip, where the distance of the flip is bounded. We call such sensors as flip-based sensors. Given an initial deployment of flip-based sensors in a field, our problem is to determine a movement plan for the sensors in order to maximize the sensor network coverage, and minimize the number of flips. We propose a minimum-cost maximum-flow based solution to this problem. We prove that our solution optimizes both the coverage and the number of flips. We also study the sensitivity of coverage and the number of flips to flip distance under different initial deployment distributions of sensors. We observe that increased flip distance achieves better coverage, and reduces the number of flips required per unit increase in coverage. However, such improvements are constrained by initial deployment distributions of sensors, due to the limitations on sensor mobility.

Xiaole Bai; Bin Ma; Dong Xuan; Changqing Xu

2005-01-01T23:59:59.000Z

329

Related Links on Community Renewable Energy Deployment | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Community Renewable Energy Deployment Community Renewable Energy Deployment Related Links on Community Renewable Energy Deployment The following publications and websites provide helpful information for communities planning or implementing renewable energy and energy efficiency projects. Publications The U.S. Department of Energy (DOE) and its National Renewable Energy Laboratory (NREL) publish numerous community guides, resources, and examples, as well as publications geared toward organizations that provide technical assistance to communities. Community Guides, Resources, and Examples These documents provide how-to information, steps, and resources for community-wide projects, as well as lessons learned from other communities. A Guide to Community Solar: Utility, Private, and Non-Profit Project

330

Designing a cost-effective CO2 storage infrastructure using a GIS based linear optimization energy model  

Science Conference Proceedings (OSTI)

Large-scale deployment of carbon capture and storage needs a dedicated infrastructure. Planning and designing of this infrastructure require incorporation of both temporal and spatial aspects. In this study, a toolbox has been developed that integrates ... Keywords: CCS, CHP, CO2 capture transport and storage, Energy systems model, Ft, GIS, IGCC, Linear optimization, MARKAL, NGCC, O&M&M, PC

Machteld van den Broek; Evelien Brederode; Andrea Ramrez; Leslie Kramers; Muriel van der Kuip; Ton Wildenborg; Wim Turkenburg; Andr Faaij

2010-12-01T23:59:59.000Z

331

Report on Synchrophasor Technologies and Their Deployment in Recovery Act  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on Synchrophasor Technologies and Their Deployment in on Synchrophasor Technologies and Their Deployment in Recovery Act Projects Now Available Report on Synchrophasor Technologies and Their Deployment in Recovery Act Projects Now Available August 15, 2013 - 10:48am Addthis The Office of Electricity Delivery and Energy Reliability has released a new report that explains synchrophasor technologies and how they can be used to improve the efficiency, reliability, and resiliency of grid operations. The report also includes an analysis of the costs and benefits of synchrophasors, based on data and initial results from Recovery Act-funded projects that are deploying the technologies. The report is available now for downloading. Addthis Related Articles Reports on the Impact of the Smart Grid Investment Grant Program Now

332

Synchrophasor Technologies and their Deployment in the Recovery Act Smart  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Synchrophasor Technologies and their Deployment in the Recovery Act Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid Programs (August 2013) Synchrophasor Technologies and their Deployment in the Recovery Act Smart Grid Programs (August 2013) The American Recovery and Reinvestment Act of 2009 provided $4.5 billion for the Smart Grid Investment Grant (SGIG), Smart Grid Demonstration Program (SGDP), and other DOE smart grid programs. These programs provided grants to the electric utility industry to deploy smart grid technologies to modernize the nation's electric grid. As a part of these programs, independent system operators, regional transmission organizations, and electric utilities installed synchrophasor and supporting technologies and systems in their electric power transmission systems.

333

Guidance for Deployment of Mobile Technologies for Nuclear Power Plant  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Guidance for Deployment of Mobile Technologies for Nuclear Power Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers This report is a guidance document prepared for the benefit of commercial nuclear power plants' (NPPs) supporting organizations and personnel who are considering or undertaking deployment of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at NPP business managers, Electric Power Research Institute, Institute of Nuclear Power Operations, and other non-Information Technology personnel. This information is not intended to replace basic project management practices or reiterate these processes, but is to support decision-making,

334

Quarterly Nuclear Deployment Summary, April 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quarterly Nuclear Deployment Summary, April 2012 Quarterly Nuclear Deployment Summary, April 2012 Quarterly Nuclear Deployment Summary, April 2012 April 30, 2012 - 12:31pm Addthis Quarterly Nuclear Deployment Summary The U.S. NRC voted to approve the issuance of the COLs for Southern Nuclear's Vogtle Units 3 and 4 on February 9, 2012. The issuance marks the first COL ever to be issued and the construction of a new nuclear power plant in more than 30 years. SCE&G's V.C Summer Units 2 and 3 received approval for COLs on March 30, 2012, making them the second US new-build in 30 years. The Tennessee Valley Authority has revised the cost and time estimates of Unit 2 at the Watts Bar Nuclear Plant. The new schedule estimates the cost to be in the range of $4 billion with a completion date of late 2015. South Mississippi Electric Power Association (SMEPA) has signed a

335

Outdoor Solid-State Lighting Technology Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies » Technology Deployment » Outdoor Solid-State Technologies » Technology Deployment » Outdoor Solid-State Lighting Technology Deployment Outdoor Solid-State Lighting Technology Deployment October 7, 2013 - 9:10am Addthis Outdoor solid-state lighting (SSL) technology has the potential to reduce U.S. lighting energy usage by nearly one half and contribute significantly to our nation's climate change solutions. The U.S. Department of Energy's (DOE) Buildings Technologies Office offers a wealth of information on its Solid-State Lighting website. Visit the site to find: SSL Basics Studies and Reports CALiPER Summary Reports Tools SSL Webcasts. Also see: FEMP Outdoor SSL Initiative: Resources for Outdoor SSL Applications outlines resources available for outdoor solid-state lighting projects. Better Buildings Alliance: This DOE initiative is driven and managed

336

DOE, Invensys Operations Management to Develop, Deploy Operator Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE, Invensys Operations Management to Develop, Deploy Operator DOE, Invensys Operations Management to Develop, Deploy Operator Training System for Supercritical Coal Power Plants DOE, Invensys Operations Management to Develop, Deploy Operator Training System for Supercritical Coal Power Plants December 10, 2012 - 12:00pm Addthis Washington, DC - A new U.S. Department of Energy (DOE) cooperative research and development agreement to develop, test, and deploy a dynamic simulator and operator training system (OTS) could eventually help commercialize important carbon capture technologies at the nation's power plants. The high-fidelity, real-time OTS for a generic supercritical once-through (SCOT) pulverized-coal power plant will be installed at the National Energy Technology Laboratory's (NETL's) Advanced Virtual Energy Simulation

337

Property:Number of Devices Deployed | Open Energy Information  

Open Energy Info (EERE)

Devices Deployed Devices Deployed Jump to: navigation, search Property Name Number of Devices Deployed Property Type Number Pages using the property "Number of Devices Deployed" Showing 25 pages using this property. (previous 25) (next 25) M MHK Projects/40MW Lewis project + 0 + MHK Projects/ADM 3 + 1 + MHK Projects/ADM 5 + 1 + MHK Projects/AW Energy EMEC + 1 + MHK Projects/AWS II + 2 + MHK Projects/Admirality Inlet Tidal Energy Project + 450 + MHK Projects/Agucadoura + 3 + MHK Projects/Alaska 18 + 100 + MHK Projects/Alaska 36 + 100 + MHK Projects/Algiers Cutoff Project + 40 + MHK Projects/Algiers Light Project + 0 + MHK Projects/Anconia Point Project + 0 + MHK Projects/Ashley Point Project + 0 + MHK Projects/Avondale Bend Project + 0 + MHK Projects/Bar Field Bend + 0 +

338

Report on Synchrophasor Technologies and Their Deployment in Recovery Act  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report on Synchrophasor Technologies and Their Deployment in Report on Synchrophasor Technologies and Their Deployment in Recovery Act Projects Now Available Report on Synchrophasor Technologies and Their Deployment in Recovery Act Projects Now Available August 15, 2013 - 10:48am Addthis The Office of Electricity Delivery and Energy Reliability has released a new report that explains synchrophasor technologies and how they can be used to improve the efficiency, reliability, and resiliency of grid operations. The report also includes an analysis of the costs and benefits of synchrophasors, based on data and initial results from Recovery Act-funded projects that are deploying the technologies. The report is available now for downloading. Addthis Related Articles Reports on the Impact of the Smart Grid Investment Grant Program Now

339

Sysco Deploys Hydrogen Powered Pallet Trucks | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sysco Deploys Hydrogen Powered Pallet Trucks Sysco Deploys Hydrogen Powered Pallet Trucks Sysco Deploys Hydrogen Powered Pallet Trucks July 12, 2010 - 2:50pm Addthis Food service distribution company Sysco celebrated the grand opening of its highly efficient distribution center in June in Houston. As part of Sysco's efforts to reduce its carbon footprint, the company deployed almost 100 pallet trucks powered by fuel cells that create only water and heat as by-products. The hydrogen fuel cell project's cost was partially covered by funding from a $1.2 million grant provided by the American Recovery and Reinvestment Act through the U.S. Department of Energy's Fuel Cell Technologies Program. The total project cost was $3.3 million. The 98 new Raymond Corporation pallet lifts are powered by Plug Power

340

Combined Heat & Power Technology Overview and Federal Sector Deployment  

Energy.gov (U.S. Department of Energy (DOE))

Presentation covers the Combined Heat & Power Technology Overview and Federal Sector Deployment from Oakridge National Laboratory. The presentation is from the FUPWG Spring Meeting, held on May 22, 2013 in San Francisco, California.

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Regional Effort to Deploy Clean Coal Technologies -- Addressing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Resources Regional effoRt to Deploy Clean Coal teChnologies Addressing the Water-Energy Interface Background Recent water shortages in various parts of the United States have...

342

Creating a Comprehensive Solar Water Heating Deployment Strategy  

DOE Green Energy (OSTI)

This report details the results of a research conducted in 1998 and 1999 and outlines a marketing deployment plan designed for businesses interested in marketing solar water heaters in the new home industry.

Focus Marketing Services

1999-08-18T23:59:59.000Z

343

Vehicle Technologies Office: The eGallon Tool Advances Deployment...  

NLE Websites -- All DOE Office Websites (Extended Search)

eGallon Tool Advances Deployment of Electric Vehicles The Department of Energy recently launched the eGallon to help consumers compare the cost of fueling electric vehicles (EVs)...

344

Electric Vehicle Deployment: Policy Questions and Impacts to...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Questions and Impacts to the U.S. Electric Grid - EAC Recommendations (November 2011) Electric Vehicle Deployment: Policy Questions and Impacts to the U.S. Electric Grid - EAC...

345

Effects of Deployment Investment on the Growth of the Biofuels...  

NLE Websites -- All DOE Office Websites (Extended Search)

Effects of Deployment Investment on the Growth of the Biofuels Industry Laura J. Vimmerstedt and Brian W. Bush Technical Report NRELTP-6A20-60802 December 2013 NREL is a national...

346

Rapid parallel systems deployment: techniques for overnight clustering  

Science Conference Proceedings (OSTI)

Automated system deployment frameworks and configuration management systems have been in wide use for a number of years. However, due to increasing pressures to maintain high availability, coupled with the price effects of commodity servers, administrators ...

Donna Cumberland; Randy Herban; Rick Irvine; Michael Shuey; Mathieu Luisier

2008-11-01T23:59:59.000Z

347

A methodology for developing and deploying distributed applications  

Science Conference Proceedings (OSTI)

We describe a methodology for developing and deploying distributed Java applications using a reflective middleware system called RAFDA. We illustrate the methodology by describing how it has been used to develop a peer-to-peer infrastructure, and explain ...

Graham N. C. Kirby; Scott M. Walker; Stuart J. Norcross; Alan Dearle

2005-11-01T23:59:59.000Z

348

Federal Technology Deployment Pilot: Exterior Solid State Lighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Technology Deployment Federal Technology Deployment Pilot: Exterior Solid State Lighting Jeff McCullough, LC October 24, 2011 Pacific Northwest National Laboratory Richland, Washington 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * Overview of DOE's Solid-State Lighting Program * Federal Technology Deployment Pilot: Exterior Solid State Lighting * FEMP Technology Deployment Matrix This Morning's Topics 3 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov Energy Savings Potential of Solid-State Lighting SSL Multi-Year Program Plan, May 2011: http://apps1.eere.energy.gov/buildings/publications/pdfs/ssl/ssl_mypp2011_web.pdf 4 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov A Market in Motion * Tsunami of new products coming to market * Significant learning curve for

349

Regulatory Instruments for Deployment of Clean Energy Technologies  

E-Print Network (OSTI)

Answering to the formidable challenge of climate change calls for a quick transition to a future economy with a drastic reduction in GHG emissions. And this in turn requires the development and massive deployment of new ...

Prez-Arriaga, Ignacio J.

350

FACT SHEET: SUPER-EFFICIENT EQUIPMENT AND APPLICANCE DEPLOYMENT INITIATIVE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FACT SHEET: SUPER-EFFICIENT EQUIPMENT AND APPLICANCE DEPLOYMENT INITIATIVE At the Clean Energy Ministerial in Washington, D.C. on July 19 th and 20 th , ministers pledged joint efforts to dramatically improve the energy efficiency of household appliances and other energy-using equipment - cutting energy waste, creating jobs, reducing pollution, and saving money for consumers around the world. The ministers launched the Super-efficient Equipment and Appliance Deployment (SEAD) Initiative, a

351

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

Science Conference Proceedings (OSTI)

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.

Bill Stanley; Patrick Gonzalez; Sandra Brown; Jenny Henman; Ben Poulter; Sarah Woodhouse Murdock; Neil Sampson; Tim Pearson; Sarah Walker; Zoe Kant; Miguel Calmon; Gilberto Tiepolo

2006-06-30T23:59:59.000Z

352

Technical Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

Science Conference Proceedings (OSTI)

The Nature Conservancy participated in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project was 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration'. The objectives of the project were to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Final Technical Report discusses the results of the six tasks that The Nature Conservancy undertook to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between July 1st 2001 and July 10th 2008. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. The project occurred in two phases. The first was a focused exploration of specific carbon measurement and monitoring methodologies and pre-selected carbon sequestration opportunities. The second was a more systematic and comprehensive approach to compare various competing measurement and monitoring methodologies, and assessment of a variety of carbon sequestration opportunities in order to find those that are the lowest cost with the greatest combined carbon and other environmental benefits. In the first phase we worked in the U.S., Brazil, Belize, Bolivia, Peru, and Chile to develop and refine specific carbon inventory methods, pioneering a new remote-sensing method for cost-effectively measuring and monitoring terrestrial carbon sequestration and system for developing carbon baselines for both avoided deforestation and afforestation/reforestation projects. We evaluated the costs and carbon benefits of a number of specific terrestrial carbon sequestration activities throughout the U.S., including reforestation of abandoned mined lands in southwest Virginia, grassland restoration in Arizona and Indiana, and reforestation in the Mississippi Alluvial Delta. The most cost-effective U.S. terrestrial sequestration opportunity we found through these studies was reforestation in the Mississippi Alluvial Delta. In Phase II we conducted a more systematic assessment and comparison of several different measurement and monitoring approaches in the Northern Cascades of California, and a broad 11-state Northeast regional assessment, rather than pre-selected and targeted, analysis of terrestrial sequestration costs and benefits. Work was carried out in Brazil, Belize, Chile, Peru and the USA. Partners include the Winrock International Institute for Agricultural Development, The Sampson Group, Programme for Belize, Society for Wildlife Conservation (SPVS), Universidad Austral de Chile, Michael Lefsky, Colorado State University, UC Berkeley, the Carnegie Institution of Washington, ProNaturaleza, Ohio State University, Stephen F. Austin University, Geographical Modeling Services, Inc., WestWater, Los Alamos National Laboratory, Century Ecosystem Services, Mirant Corporation, General Motors, American Electric Power, Salt River Project, Applied Energy Systems, KeySpan, NiSource, and PSEG. This project, 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration', has resulted in over 50 presentations and reports, available publicly through the Department of Energy or by visiting the links listed in Appendix 1. More

Bill Stanley; Sandra Brown; Zoe Kant; Patrick Gonzalez

2009-01-07T23:59:59.000Z

353

Technical Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration  

SciTech Connect

The Nature Conservancy participated in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project was 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration'. The objectives of the project were to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects, providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Final Technical Report discusses the results of the six tasks that The Nature Conservancy undertook to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between July 1st 2001 and July 10th 2008. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. The project occurred in two phases. The first was a focused exploration of specific carbon measurement and monitoring methodologies and pre-selected carbon sequestration opportunities. The second was a more systematic and comprehensive approach to compare various competing measurement and monitoring methodologies, and assessment of a variety of carbon sequestration opportunities in order to find those that are the lowest cost with the greatest combined carbon and other environmental benefits. In the first phase we worked in the U.S., Brazil, Belize, Bolivia, Peru, and Chile to develop and refine specific carbon inventory methods, pioneering a new remote-sensing method for cost-effectively measuring and monitoring terrestrial carbon sequestration and system for developing carbon baselines for both avoided deforestation and afforestation/reforestation projects. We evaluated the costs and carbon benefits of a number of specific terrestrial carbon sequestration activities throughout the U.S., including reforestation of abandoned mined lands in southwest Virginia, grassland restoration in Arizona and Indiana, and reforestation in the Mississippi Alluvial Delta. The most cost-effective U.S. terrestrial sequestration opportunity we found through these studies was reforestation in the Mississippi Alluvial Delta. In Phase II we conducted a more systematic assessment and comparison of several different measurement and monitoring approaches in the Northern Cascades of California, and a broad 11-state Northeast regional assessment, rather than pre-selected and targeted, analysis of terrestrial sequestration costs and benefits. Work was carried out in Brazil, Belize, Chile, Peru and the USA. Partners include the Winrock International Institute for Agricultural Development, The Sampson Group, Programme for Belize, Society for Wildlife Conservation (SPVS), Universidad Austral de Chile, Michael Lefsky, Colorado State University, UC Berkeley, the Carnegie Institution of Washington, ProNaturaleza, Ohio State University, Stephen F. Austin University, Geographical Modeling Services, Inc., WestWater, Los Alamos National Laboratory, Century Ecosystem Services, Mirant Corporation, General Motors, American Electric Power, Salt River Project, Applied Energy Systems, KeySpan, NiSource, and PSEG. This project, 'Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration', has resulted in over 50 presentations and reports, available publicly through the Department of Energy or by visiting the links listed in Appendix 1. More

Bill Stanley; Sandra Brown; Zoe Kant; Patrick Gonzalez

2009-01-07T23:59:59.000Z

354

The Indian Ocean Experiment: Widespread Air Pollution from South and Southeast Asia  

E-Print Network (OSTI)

). Many people in the Indian region still live in rural areas where domestic energy consumption largely large-scale subsidence and cloud free conditions. Unless international control measures are taken, air1 The Indian Ocean Experiment: Widespread Air Pollution from South and Southeast Asia J. Lelieveld1

Dickerson, Russell R.

355

Cost Effectiveness of Cleaning Techniques for Controlling Human-based Transport of Invasive Exotic Plants on Electric Transmission L ine Rights-of-Way  

Science Conference Proceedings (OSTI)

This report provides a broad overview of accomplishments over the first 3 months of a project to define the cost effectiveness of cleaning techniques on electric transmission rights of way aimed at controlling the spread of invasive exotic (IE) vegetation. It includes the results of a brief literature search of cleaning techniques.BackgroundA science basis for process and procedure to cost effectively clean personnel and equipment so as to reduce the ...

2012-12-08T23:59:59.000Z

356

Conceptual Development and Performance Assessment for the Deployment Staging of Advanced Vehicle Control and Safety Systems  

E-Print Network (OSTI)

Also, actual deployment of Smartway, which will become the2003. By the year 2015, Smartway will be deployed on allfew years. The Japanese Smartway concept will implement user

VanderWerf, Joel; Shladover, Steven; Miller, Mark A.

2004-01-01T23:59:59.000Z

357

The potential impact of renewable energy deployment on natural gas prices in New England  

E-Print Network (OSTI)

Potential Impact of Renewable Energy Deployment on Naturaland in New England. Renewable energy (RE) technologies canof studies show that renewable energy deployment can also

Wiser, Ryan; Bolinger, Mark

2004-01-01T23:59:59.000Z

358

California System Architecture Study: Architecture for Action: A Strategy for Facilitating Near-term Deployment  

E-Print Network (OSTI)

deployment in Southern California: Policy preferences andand recommendations for ITS deployment in California (California PATH Research Report No. UCB-ITS- PRR-96-18).

Horan, Thomas A.; Glazer, Lawrence Jesse; Hoene, Christopher; Hall, Randolph; Intihar, Christopher; Ice, Ronald

1999-01-01T23:59:59.000Z

359

Standardization of transportation classes for object-oriented deployment simulations.  

SciTech Connect

Many recent efforts to integrate transportation and deployment simulations, although beneficial, have lacked a feature vital for seamless integration: a common data class representation. It is an objective of the Department of Defense (DoD) to standardize all classes used in object-oriented deployment simulations by developing a standard class attribute representation and behavior for all deployment simulations that rely on an underlying class representation. The Extensive Hierarchy and Object Representation for Transportation Simulations (EXHORT) is a collection of three hierarchies that together will constitute a standard and consistent class attribute representation and behavior that could be used directly by a large set of deployment simulations. The first hierarchy is the Transportation Class Hierarchy (TCH), which describes a significant portion of the defense transportation system; the other two deal with infrastructure and resource classes. EXHORT will allow deployment simulations to use the same set of underlying class data, ensure transparent exchanges, reduce the effort needed to integrate simulations, and permit a detailed analysis of the defense transportation system. This paper describes EXHORT's first hierarchy, the TCH, and provides a rationale for why it is a helpful tool for modeling major portions of the defense transportation system.

Burke, J. F., Jr.; Howard, D. L.; Jackson, J.; Macal, C. M.; Nevins, M. R.; Van Groningen, C. N.

1999-07-30T23:59:59.000Z

360

Microsoft Word - 20110321_LTI_PPM_Tetra Tech_Cost Effective Wireless Application in Power Generation Markets.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

11/1483 11/1483 Cost-Effective Wireless Application in the Power Generation Market 21 March, 2011 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe on privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

SciTech Connect

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energys (DOEs) Building Energy Codes Program (BECP). DOEs BECP supports upgrading building energy codes and standards, and the states adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

Thornton, Brian A.; Halverson, Mark A.; Myer, Michael; Cho, Hee Jin; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

2013-06-18T23:59:59.000Z

362

National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007  

SciTech Connect

Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energys (DOEs) Building Energy Codes Program (BECP). DOEs BECP supports upgrading building energy codes and standards, and the states adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

Thornton, Brian; Halverson, Mark A.; Myer, Michael; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

2013-11-30T23:59:59.000Z

363

Cost effective solar hot water system for Econo-Travel Motor Hotel located at Bluefield, West Virginia. Final report  

SciTech Connect

The final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 3400 Cumberland Road, Bluefield, West Virginia. The description of the system along with the final breakdown performance data and payback time are given. The payback time for the installed system will be approximately five (5) years instead of the 7.73 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. The success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

1979-07-01T23:59:59.000Z

364

Cost effective solar hot water system for Econo-Travel Motor Hotel located at Richmond, Virginia. Final report  

SciTech Connect

The final report is presented of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 5408 Williamsburg Road, Richmond, Virginia. The description of the system is given along with the final cost breakdown, expected performance data and expected payback time for the installed system is estimated to be approximately five (5) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. The success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

1979-09-01T23:59:59.000Z

365

Cost effective solar hot water system for Econo-Travel Motor Hotel located at Woodbrdge, VA. Final report  

SciTech Connect

The final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 13317 Gordon Boulevard, Woodbridge, Virginia is given. The description of the system along with the final breakdown, performance data and payback time are given. The payback time for the installed system will be approximately four (4) years instead of the 7.2 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. As called for in the proposal to DOE, the success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

1978-11-01T23:59:59.000Z

366

Cost effective solar hot water system for Econo-Travel Motor Hotel located at Bluefield, West Virginia. Final report  

DOE Green Energy (OSTI)

The final report of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 3400 Cumberland Road, Bluefield, West Virginia. The description of the system along with the final breakdown performance data and payback time are given. The payback time for the installed system will be approximately five (5) years instead of the 7.73 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. The success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

Not Available

1979-07-01T23:59:59.000Z

367

Cost effective solar hot water system for Econo-Travel Motor Hotel located at Richmond, Virginia. Final report  

DOE Green Energy (OSTI)

The final report is presented of a cost effective solar hot water heating system installed on the Econo-Travel Motor Hotel at 5408 Williamsburg Road, Richmond, Virginia. The description of the system is given along with the final cost breakdown, expected performance data and expected payback time for the installed system is estimated to be approximately five (5) years instead of the 6.65 years estimated for the proposal. The additional savings is due to the reduction in the peak demand charge since the electric hot water heaters are not required to operate at the same time each morning as the dryers used for the laundry. The success of the system will be determined by the reduction in the utility cost and reduced use of our fossil fuels. The results shown in the hotel's monthly electricity bills indicate that this goal has been accomplished.

Not Available

1979-09-01T23:59:59.000Z

368

Cost-Effective Cable Insulation: Nanoclay Reinforced Ethylene-Propylene-Rubber for Low-Cost HVDC Cabling  

SciTech Connect

GENI Project: GE is developing new, low-cost insulation for high-voltage direct current (HVDC) electricity transmission cables. The current material used to insulate HVDC transmission cables is very expensive and can account for as much as 1/3 of the total cost of a high-voltage transmission system. GE is embedding nanomaterials into specialty rubber to create its insulation. Not only are these materials less expensive than those used in conventional HVDC insulation, but also they will help suppress excess charge accumulation. The excess charge left behind on a cable poses a major challenge for high-voltage insulationif its not kept to a low level, it could ultimately lead the insulation to fail. GEs low-cost insulation is compatible with existing U.S. cable manufacturing processes, further enhancing its cost effectiveness.

None

2012-02-24T23:59:59.000Z

369

Cost-Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines  

SciTech Connect

The objective of this project is to identify, develop, test, and commercialize emissions control and monitoring technologies that can be implemented by exploration and production (E&P) operators to significantly lower the cost of environmental compliance and expedite project permitting. The project team takes considerable advantage of the emissions control research and development efforts and practices that have been underway in the gas pipeline industry for the last 12 years. These efforts and practices are expected to closely interface with the E&P industry to develop cost-effective options that apply to widely-used field and gathering engines, and which can be readily commercialized. The project is separated into two phases. Phase 1 work establishes an E&P industry liaison group, develops a frequency distribution of installed E&P field engines, and identifies and assesses commercially available and emerging engine emissions control and monitoring technologies. Current and expected E&P engine emissions and monitoring requirements are reviewed, and priority technologies are identified for further development. The identified promising technologies are tested on a laboratory engine to confirm their generic viability. In addition, a full-scale field test of prototype emissions controls will be conducted on at least ten representative field engine models with challenging emissions profiles. Emissions monitoring systems that are integrated with existing controls packages will be developed. Technology transfer/commercialization is expected to be implemented through compressor fleet leasing operators, engine component suppliers, the industry liaison group, and the Petroleum Technology Transfer Council. This topical report discusses work completed during Phase 1 of the project Cost Effective Reciprocating Engine Emissions Control and Monitoring for E&P Field and Gathering Engines. In this report information, data, and results are compiled and summarized from quarterly reports 1 through 15. Results for each of the tasks in Phase 1 are presented.

Kirby S. Chapman; Sarah R. Nuss-Warren

2007-02-01T23:59:59.000Z

370

Using decision analysis to determine the cost-effectiveness of intensity-modulated radiation therapy in the treatment of intermediate risk prostate cancer  

SciTech Connect

Background: The specific aim of this study is to evaluate the cost-effectiveness of intensity-modulated radiation therapy (IMRT) compared with three-dimensional conformal radiation therapy (3D-CRT) in the treatment of a 70-year-old with intermediate-risk prostate cancer. Methods: A Markov model was designed with the following states; posttreatment, hormone therapy, chemotherapy, and death. Transition probabilities from one state to another were calculated from rates derived from the literature for IMRT and 3D-CRT. Utility values for each health state were obtained from preliminary studies of preferences conducted at Fox Chase Cancer Center. The analysis took a payer's perspective. Expected mean costs, cost-effectiveness scatterplots, and cost acceptability curves were calculated with commercially available software. Results: The expected mean cost of patients undergoing IMRT was $47,931 with a survival of 6.27 quality-adjusted life years (QALYs). The expected mean cost of patients having 3D-CRT was $21,865 with a survival of 5.62 QALYs. The incremental cost-effectiveness comparing IMRT with CRT was $40,101/QALYs. Cost-effectiveness acceptability curve analysis revealed a 55.1% probability of IMRT being cost-effective at a $50,000/QALY willingness to pay. Conclusion: Intensity-modulated radiation therapy was found to be cost-effective, however, at the upper limits of acceptability. The results, however, are dependent on the assumptions of improved biochemical disease-free survival with fewer patients undergoing subsequent salvage therapy and improved quality of life after the treatment. In the absence of prospective randomized trials, decision analysis can help inform physicians and health policy experts on the cost-effectiveness of emerging technologies.

Konski, Andre [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, PA (United States)]. E-mail: andre.konski@fccc.edu; Watkins-Bruner, Deborah [Department of Population Sciences, Fox Chase Cancer Center, Philadelphia, PA (United States); Feigenberg, Steven [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, PA (United States); Hanlon, Alexandra [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, PA (United States); Kulkarni, Sachin M.S. [Department of Population Sciences, Fox Chase Cancer Center, Philadelphia, PA (United States); Beck, J. Robert [Department of Information and Science Technologies, Fox Chase Cancer Center, Philadelphia, PA (United States); Horwitz, Eric M. [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, PA (United States); Pollack, Alan [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, PA (United States)

2006-10-01T23:59:59.000Z

371

Quarterly Nuclear Power Deployment Scorecard - January 2013 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Deployment Scorecard - January 2013 Power Deployment Scorecard - January 2013 Quarterly Nuclear Power Deployment Scorecard - January 2013 News Updates On October 22, 2012, Dominion Resources Inc. announced that it would close and decommission its Kewaunee Power Station located in Carlton, Wis. after failing to find a buyer for the plant. The company said that the plant closure was a purely economic decision resulting from low projected wholesale electricity prices. Power production will cease in the second quarter of 2013. On November 20, the Department of Energy announced that it had selected the Generation mPower team as a recipient for Government cost-shared funding as part of its Small Modular Reactor Licensing Technical Support program. The Department also announced plans to issue a follow-on solicitation open to other companies and manufacturers, focused

372

Energy Department Accelerates the Deployment of Advanced Vehicle  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Accelerates the Deployment of Advanced Vehicle Accelerates the Deployment of Advanced Vehicle Technologies with Private Industry Partnerships Energy Department Accelerates the Deployment of Advanced Vehicle Technologies with Private Industry Partnerships March 5, 2013 - 2:15pm Addthis News Media Contact (202) 586-4940 WASHINGTON - As part of the Obama Administration's commitment to speeding the transition to more sustainable energy sources that will help drive economic growth, the Energy Department today announced 16 major U.S. employers and two stakeholder groups have joined the Workplace Charging Challenge to give more American workers access to new transportation options, while another three U.S. corporations have joined the National Clean Fleets Partnership. These steps support President Obama's goal to

373

New Orleans, Louisiana, Deployment Project | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Orleans, Louisiana, Deployment Project Orleans, Louisiana, Deployment Project New Orleans, Louisiana, Deployment Project November 13, 2013 - 10:45am Addthis The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) are helping New Orleans, Louisiana, incorporate energy efficiency into rebuilding efforts after being devastated by Hurricanes Katrina and Rita. On August 29, 2005, Hurricane Katrina, the single largest catastrophe in U.S. history, struck the Gulf Coast, flooding 80% of New Orleans and causing $89.6 billion in damages. Three weeks later, the city was hit again by Hurricane Rita. DOE and NREL focused their assistance efforts to New Orleans in the specific areas listed below. You can also read more in the fact sheet Rising Above the Water: New Orleans Implements Energy Efficiency and

374

Community Renewable Energy Deployment Success Stories: Financing Renewable  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Community Renewable Energy Deployment Success Stories: Financing Community Renewable Energy Deployment Success Stories: Financing Renewable Energy Projects Webinar Community Renewable Energy Deployment Success Stories: Financing Renewable Energy Projects Webinar August 21, 2012 3:00PM EDT Webinar This DOE webinar will cover the challenges and successes of financing mechanisms for a solar project in Knoxville, Tennessee, and a Sacramento Municipal Utility District (SMUD) project. More details about the projects are provided below. Renewables and Sector Partnerships: Leveraging Incentives to Work for You In September 2009, the City of Knoxville was awarded more than $2 million in DOE Energy Efficiency and Conservation Block Grant funding. The city obtained approval to use $250,000 of that funding for initial investment to

375

Quarterly Nuclear Power Deployment Scorecard - January 2013 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Deployment Scorecard - January 2013 Power Deployment Scorecard - January 2013 Quarterly Nuclear Power Deployment Scorecard - January 2013 News Updates On October 22, 2012, Dominion Resources Inc. announced that it would close and decommission its Kewaunee Power Station located in Carlton, Wis. after failing to find a buyer for the plant. The company said that the plant closure was a purely economic decision resulting from low projected wholesale electricity prices. Power production will cease in the second quarter of 2013. On November 20, the Department of Energy announced that it had selected the Generation mPower team as a recipient for Government cost-shared funding as part of its Small Modular Reactor Licensing Technical Support program. The Department also announced plans to issue a follow-on solicitation open to other companies and manufacturers, focused

376

New Orleans, Louisiana, Deployment Project | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Orleans, Louisiana, Deployment Project New Orleans, Louisiana, Deployment Project New Orleans, Louisiana, Deployment Project November 13, 2013 - 10:45am Addthis The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) are helping New Orleans, Louisiana, incorporate energy efficiency into rebuilding efforts after being devastated by Hurricanes Katrina and Rita. On August 29, 2005, Hurricane Katrina, the single largest catastrophe in U.S. history, struck the Gulf Coast, flooding 80% of New Orleans and causing $89.6 billion in damages. Three weeks later, the city was hit again by Hurricane Rita. DOE and NREL focused their assistance efforts to New Orleans in the specific areas listed below. You can also read more in the fact sheet Rising Above the Water: New Orleans Implements Energy Efficiency and

377

QUARTERLY NUCLEAR DEPLOYMENT SCORECARD - JULY 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QUARTERLY NUCLEAR DEPLOYMENT SCORECARD - JULY 2013 QUARTERLY NUCLEAR DEPLOYMENT SCORECARD - JULY 2013 QUARTERLY NUCLEAR DEPLOYMENT SCORECARD - JULY 2013 News Updates Dominion Resources, Inc. has informed the NRC that Dominion Virginia Power will amend its COL application (COLA) to reflect the ESBWR technology by the end of 2013. In 2009 Dominion dropped the ESBWR from its COLA after failing to reach a commercial agreement with General Electric-Hitachi (GEH). A COL is expected no earlier than late 2015. Dominion Virginia Power has not yet committed to building a new nuclear unit at North Anna. NRC has determined that the latest revision to the South Texas Project COLA does not alleviate foreign interest concerns; the staff found that despite having only a 10% ownership stake in Nuclear Innovation North America LLC (NINA), Toshiba American Nuclear Energy Corporation's

378

Quarterly Nuclear Deployment Summary, January 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quarterly Nuclear Deployment Summary, January 2012 Quarterly Nuclear Deployment Summary, January 2012 Quarterly Nuclear Deployment Summary, January 2012 January 30, 2012 - 1:10pm Addthis Quarterly News The U.S. NRC voted to approve the amended AP1000 design certification on December 22, 2011. The Commission also announced the rule would be effective immediately after it was published in the Federal Register on December 30, 2011. A final rule for the GE-ABWR design certification amendment was approved and published in the Federal Register on December 16, 2011. The rule will become effective January 17, 2012. The condenser for Vogtle Unit 3 has been completed by Japan's Toshiba and began its journey from Sacheon to Savannah, Georgia on November 21. The condenser marks the first major component Toshiba has shipped for

379

Quarterly Nuclear Power Deployment Scorecard - April 2013 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Power Deployment Scorecard - April 2013 Power Deployment Scorecard - April 2013 Quarterly Nuclear Power Deployment Scorecard - April 2013 News Updates On November 20, 2012, the Department of Energy announced that it had selected the mPower America team, led by Babcock and Wilcox (B&W) partnered with Tennessee Valley Authority and Bechtel, as a recipient for Government cost-shared funding as part of its Small Modular Reactor Licensing Technical Support program. Negotiations with B&W are complete and the award is imminent. On March 11, 2013, the Department issued a follow-on solicitation open to other companies and manufacturers focused on furthering small modular reactor efficiency, operations and design. On January 10, 2013, NRC published the Final Environmental Impact Statement for the Enrico Fermi Unit 3 Combined License application. An

380

Quarterly Nuclear Deployment Scorecard - July 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quarterly Nuclear Deployment Scorecard - July 2012 Quarterly Nuclear Deployment Scorecard - July 2012 Quarterly Nuclear Deployment Scorecard - July 2012 News Updates The final ruling on the design certification for Mitsubishi Heavy Industries' APWR has been revised until 2015. Structural changes were made to the design by vendor, which requires a new seismic analysis to be performed. Because of this, the review schedule for the COL applications for Comanche Peak and North Anna has been delayed by approximately 18 months. The final ruling on Areva's EPR design certification has been revised from June 2013 until the end of 2014. The change is to allow Areva to respond to outstanding technical issues and provide additional information related to post-Fukushima requirements. DOE released a funding opportunity announcement on March, 22 2012 to

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Quarterly Nuclear Deployment Scorecard - January 2014 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quarterly Nuclear Deployment Scorecard - January 2014 Quarterly Nuclear Deployment Scorecard - January 2014 Quarterly Nuclear Deployment Scorecard - January 2014 News Updates Luminant has requested a suspension of the NRC's review of its Comanche Peak Combined Construction and Operating License (COL) application. The company cited impacts to the review schedule of the Mitsubishi Heavy Industries US Advanced Pressurized Water Reactor (US-APWR) due to the vendor's desire to refocus its resources to reactor restarts in Japan as well as low electricity prices driven by low natural gas prices as reasons for the suspension. Unistar Nuclear Operating Co. has formally withdrawn its COL application from the Nuclear Regulatory Commission (NRC) to build and operate Areva's U.S. EPR at its Nine Mile Point site in Oswego, NY. In

382

Toward Governance of Cross-Cloud Application Deployment  

E-Print Network (OSTI)

In this article, the authors introduce the main ideas around the governance of cross-Cloud application deployment and their related concepts. It is argued that, due to the increasing complexity and nature of the Cloud market, an intermediary specialized in brokering the deployment of different components of a same application onto different Cloud products could both facilitate said deployment and in some cases improve its quality in terms of cost, security & reliability and QoS. In order to fulfill these objectives, the authors propose a high level architecture that relies on their previous work on governance of policy & rule driven distributed systems. This architecture aims at supplying five main functions of 1) translation of Service Level Agreements (SLAs) and pricing into a common shared DSL, 2) correlation of analytical data (e.g. monitoring, metering), 3) combination of Cloud products, 4) information from third parties regarding different aspects of Quality of Service (QoS) and 5) cross-Cloud a...

de Leusse, Pierre

2012-01-01T23:59:59.000Z

383

Quarterly Nuclear Deployment Summary, January 2013 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment Summary, January 2013 Deployment Summary, January 2013 Quarterly Nuclear Deployment Summary, January 2013 January 30, 2013 - 5:59pm Addthis Quarterly Updates On October 22 Dominion Resources Inc. announced that it would close and decommission its Kewaunee Power Station located in Carlton, Wis. after failing to find a buyer for the plant. The company said that the plant closure was a purely economic decision resulting from low projected wholesale electricity prices. Power production will cease in the second quarter of 2013. On November 20, 2012, the Department of Energy announced that it had selected the Generation mPower team as a recipient for Government cost-shared funding as part of its Small Modular Reactor Licensing Technical Support program. The Department also announced plans to issue a

384

Energy Department Awards $45 Million to Deploy Advanced Transportation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Awards $45 Million to Deploy Advanced Awards $45 Million to Deploy Advanced Transportation Technologies Energy Department Awards $45 Million to Deploy Advanced Transportation Technologies September 4, 2013 - 10:06am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON -- Building on President Obama's Climate Action Plan to build a 21st century transportation sector and reduce greenhouse gas emissions, the Energy Department announced today more than $45 million for thirty-eight new projects that accelerate the research and development of vehicle technologies to improve fuel efficiency, lower transportation costs and protect the environment in communities nationwide. "By partnering with universities, private industry and our national labs, the Energy Department is helping to build a strong 21st century

385

ARM - Publications: Science Team Meeting Documents: Deployment of a  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment of a scintillometer for optical turbulence investigation at NSA Deployment of a scintillometer for optical turbulence investigation at NSA - Barrow Moudry, Dana University of Alaska Fairbanks Sassen, Kenneth University of Alaska Fairbanks Vaucher, Gail Army Research Laboratory Zak, Bernard Sandia National Laboratories The University of Alaska Fairbanks in collaboration with the White Sands Army Research Lab deployed a reciprocal-path scintillometer to the ARM - NSA site at Barrow in fall 2004 for investigation of optical turbulence over the course of a year. The instrument consists of a transmitter and a receiver located approximately 1km apart. The instrument transmitter includes two arrays of nearIR LEDs which emit light in a 125-Hz pulsed mode. The receiver measures the temporal variability of the radiation after

386

New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-NASCAR Partnership Revs Deployment of Pollution Reducing DOE-NASCAR Partnership Revs Deployment of Pollution Reducing Technologies New DOE-NASCAR Partnership Revs Deployment of Pollution Reducing Technologies September 11, 2013 - 4:44pm Addthis Dr. Michael Knotek, Deputy Undersecretary for Science and Energy at the Energy Department, delivers remarks at the NASCAR Green Summit in Chicago, where the DOE-NASCAR MOU was announced. | Photo courtesy of NASCAR. Dr. Michael Knotek, Deputy Undersecretary for Science and Energy at the Energy Department, delivers remarks at the NASCAR Green Summit in Chicago, where the DOE-NASCAR MOU was announced. | Photo courtesy of NASCAR. Dr. Michael Knotek Dr. Michael Knotek Deputy Under Secretary for Science and Energy What are the key facts? A new Memorandum of Understanding (MOU) between the Energy

387

Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios  

DOE Green Energy (OSTI)

(3) Framework for Identifying Key Environmental Concerns This is the first report in the sequence and describes the results of conceptual feasibility studies of wave power plants deployed in Humboldt County, California and Oahu, Hawaii. These two sites contain many of the same competing stakeholder interactions identified at other wave power sites in the U.S. and serve as representative case studies. Wave power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize potential effects, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informed the process of selecting representative wave power devices. The selection criteria requires that devices are at an advanced stage of development to reduce technical uncertainties, and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. Table 1 summarizes the selected wave power technologies. A number of other developers are also at an advanced stage of development, but are not directly mentioned here. Many environmental effects will largely scale with the size of the wave power plant. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) a small commercial deployment, and (3) a large commercial sc

Mirko Previsic

2010-06-17T23:59:59.000Z

388

Community Renewable Energy Deployment: City of Montpelier Project | Open  

Open Energy Info (EERE)

Montpelier Project Montpelier Project Jump to: navigation, search Name Community Renewable Energy Deployment: City of Montpelier Project Agency/Company /Organization Department of Energy Focus Area Buildings, Energy Efficiency - Central Plant, Energy Efficiency - Utility, Energy Efficiency, Greenhouse Gas, Renewable Energy, Biomass Phase Evaluate Options, Get Feedback, Develop Finance and Implement Projects Resource Type Case studies/examples Availability Publicly Available Publication Date 1/1/2011 Website http://www1.eere.energy.gov/co Locality Montpelier, Vermont References Community Renewable Energy Deployment: City of Montpelier Project[1] Contents 1 Overview 2 Highlights 3 Environmental Aspects 4 References Overview This case study describes Montpelier, Vermont's efforts under the

389

NREL: Research Participant Program - Research and Deployment Disciplines  

NLE Websites -- All DOE Office Websites (Extended Search)

Research and Deployment Disciplines Research and Deployment Disciplines Participants in NREL programs are able to study a variety of disciplines within the Lab's research centers: National Bioenergy Center Biochemical engineering, microbiology, molecular biology, chemistry, and chemical engineering related to biomass and derived products. Energy Sciences Bioscience, chemical and materials science, computational science, physics, chemistry, and biological sciences. Electricity, Resources, and Building Systems Integration Physics, mechanical engineering (heat transfer emphasis), and architectural engineering. Hydrogen and Fuel Cells Research Hydrogen technologies and analysis. Materials and Computational Sciences Center Physics, materials science, chemistry, electrical engineering, and basic and applied research using high-performance computing and applied

390

Leading the Nation in Clean Energy Deployment (Fact Sheet)  

SciTech Connect

This document summarizes key efforts and projects that are part of the DOE/NREL Integrated Deployment effort to integrated energy efficiency and renewable energy technologies in cities, states, island locations, and communities around the world. The U.S. Department of Energy (DOE) is pursuing an aggressive, scalable, and replicable strategy to accelerate market adoption of clean energy solutions to power homes, businesses, and vehicles. Using the comprehensive Integrated Deployment approach developed by the National Renewable Energy Laboratory (NREL), DOE partners with communities, cities, states, federal agencies, and territories to identify and implement a variety of efficiency and renewable energy technology solutions.

Not Available

2012-07-01T23:59:59.000Z

391

Community Renewable Energy Deployment: Forest County Potawatomi Tribe |  

Open Energy Info (EERE)

Potawatomi Tribe Potawatomi Tribe Jump to: navigation, search Name Community Renewable Energy Deployment: Forest County Potawatomi Tribe Agency/Company /Organization US Department of Energy Sector Energy Focus Area Energy Efficiency - Central Plant, Economic Development, Forestry, Greenhouse Gas, Renewable Energy, Biomass - Anaerobic Digestion, Biomass, Solar, - Solar Pv, Biomass - Waste To Energy Phase Develop Finance and Implement Projects Resource Type Case studies/examples Availability Publicly available -- Free Publication Date 11/29/2010 Website http://www1.eere.energy.gov/co Locality Forest County Potawatomi Tribe References Community Renewable Energy Deployment: Forest County Potawatomi Tribe[1] Contents 1 Overview 2 Highlights 3 Environmental Aspects 4 References

392

Hydrogen Deployment System Modeling Environment (HyDS ME) Documentation: Milestone Report FY 2006  

DOE Green Energy (OSTI)

This report introduces the Hydrogen Deployment System Modeling Environment model, assumptions, and basic operations.

Parks. K.

2006-11-01T23:59:59.000Z

393

Windows 2000 deployment overview at the University of Colorado at Boulder  

Science Conference Proceedings (OSTI)

Keywords: Windows 2000, deployment, organizational issues, planning, policitcal issues, strategic goals

David Bodnar; Brad Judy; Al Roberts

2000-10-01T23:59:59.000Z

394

Efficient Sensor Deployment Control Schemes and Performance Evaluation for Obstacle and Unknown Environments  

Science Conference Proceedings (OSTI)

Deployment is a fundamental issue for wireless sensor networks (WSNs). A well-designed deployment control method not only directly influences the number of deployed sensors, but also influences on data accuracy and network topology. Three widely discussed ... Keywords: Deployment, Evaluate factors, Slow-start, Square-encircled, Wireless sensor networks

Hsu-Yang Kung; Chung-Ming Huang; Hao-Hsaing Ku

2008-04-01T23:59:59.000Z

395

A holonic approach to model and deploy large scale simulations  

Science Conference Proceedings (OSTI)

Multi-Agent Based Simulations (MABS) for real-world problems may require a large number of agents. A possible solution is to distribute the simulation in multiple machines. Thus, we are forced to consider how Large Scale MABS can be deployed in order ...

Sebastian Rodriguez; Vincent Hilaire; Abder Koukam

2006-05-01T23:59:59.000Z

396

Trio: enabling sustainable and scalable outdoor wireless sensor network deployments  

Science Conference Proceedings (OSTI)

We present the philosophy, design, and initial evaluation of the Trio Testbed, a new outdoor sensor network deployment that consists of 557 solar-powered motes, seven gateway nodes, and a root server. The testbed covers an area of approximately 50,000 ... Keywords: detection, large-scale, long-life, sensor networks, surveillance, target tracking, testbed

Prabal Dutta; Jonathan Hui; Jaein Jeong; Sukun Kim; Cory Sharp; Jay Taneja; Gilman Tolle; Kamin Whitehouse; David Culler

2006-04-01T23:59:59.000Z

397

Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings  

SciTech Connect

This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

2013-01-01T23:59:59.000Z

398

Experiences with eucalyptus: deploying an open source cloud  

Science Conference Proceedings (OSTI)

With the recent trend of exploiting resources of the cloud, we have embarked on a journey to deploy an open source cloud using Eucalyptus. During the past year we have learned many lessons about the use of Eucalyptus and clouds in general. The area of ...

Rick Bradshaw; Piotr T. Zbiegiel

2010-11-01T23:59:59.000Z

399

RapidRadio: Signal Classification and Radio Deployment Framework  

Science Conference Proceedings (OSTI)

In this article, the RapidRadio framework for signal classification and receiver deployment is discussed. The framework is a productivity-enhancing tool that reduces the required knowledge base for implementing a receiver on an FPGA-based SDR platform. ... Keywords: FPGA, signal classification, system synthesis

Jorge A. Surs; Adolfo Recio; Peter Athanas

2012-08-01T23:59:59.000Z

400

Optimal deployment of charging stations for electric vehicular networks  

Science Conference Proceedings (OSTI)

In a smart city environment, we look at a new, upcoming generation of vehicles running on electric power supplied by on-board batteries. Best recharging options include charging at home, as well as charging at public areas. In this setting, electric ... Keywords: charging infrastructure deployment, electric vehicles, urban mobility modeling, vanets

Andrea Hess; Francesco Malandrino; Moritz Bastian Reinhardt; Claudio Casetti; Karin Anna Hummel; Jose M. Barcel-Ordinas

2012-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Benefits and Detriments of Deploying Genetically Engineered Woody Biomass Crops  

Science Conference Proceedings (OSTI)

In the decade ahead, genetic engineering techniques will supplement traditional selection and controlled breeding approaches. These techniques will be used to develop transgenic tree species that exhibit significantly improved productivity and commercially valuable characteristics. Utilities interested in economically viable biomass power systems and more efficient carbon sequestration can use this report to evaluate the opportunities and challenges associated with development and deployment of transgeni...

1995-05-12T23:59:59.000Z

402

An early deployment strategy for carbon capture, utilisation, and storage  

SciTech Connect

This report describes the current use of CO2 for EOR, and discusses potential expansion of EOR using CO2 from power plants. Analysis of potential EOR development in the USA, where most current CO2-based EOR production takes place, indicates that relatively low cost, traditional sources of CO2 for EOR (CO2 domes and CO2 from natural gas processing plants) are insufficient to exploit the full potential of EOR. To achieve that full potential will require use of CO2 from combustion and gasification systems, such as fossil fuel power plants, where capture of CO2 is more costly. The cost of current CCUS systems, even with the revenue stream for sale of the CO2 for EOR, is too high to result in broad deployment of the technology in the near term. In the longer term, research and development may be sufficient to reduce CO2 capture costs to a point where CCUS would be broadly deployed. This report describes a case study of conditions in the USA to explore a financial incentive to promote early deployment of CCUS, providing a range of immediate benefits to society, greater likelihood of reducing the long-term cost of CCUS, and greater likelihood of broad deployment of CCUS and CCS in the long term. Additionally, it may be possible to craft such an incentive in a manner that its cost is more than offset by taxes flowing from increased domestic oil production. An example of such an incentive is included in this report.

Carter, L.D.

2012-11-01T23:59:59.000Z

403

Deploying a Wireless Sensor Network on an Active Volcano  

Science Conference Proceedings (OSTI)

Augmenting heavy and power-hungry data collection equipment with lighter, smaller wireless sensor network nodes leads to faster, larger deployments. Arrays comprising dozens of wireless sensor nodes are now possible, allowing scientific studies that ... Keywords: wireless sensor networks, sensor network applications, sensor network nodes, volcano research

Geoffrey Werner-Allen; Konrad Lorincz; Matt Welsh; Omar Marcillo; Jeff Johnson; Mario Ruiz; Jonathan Lees

2006-03-01T23:59:59.000Z

404

Development of Cost-Effective Low-Permeability Ceramic and Refractory Components for Aluminum Melting and Casting  

Science Conference Proceedings (OSTI)

The primary goal of this project was to develop and validate new classes of cost-effective low-permeability ceramic and refractory components for handling molten aluminum in both melting and casting environments. Three approaches were employed with partial to full success to achieve this goal: (1) Develop materials and methods for sealing surface porosity in thermal-shock-resistant ceramic refractories; (2) Develop new ceramic coatings for extreme service in molten aluminum operations, with particular emphasis on coatings based on highly stable oxide phases; and (3) Develop new monolithic refractories designed for lower-permeability applications using controlled porosity gradients and particle size distributions. The results of the research work and the field tests performed utilizing these three approaches are listed below: (1) It was demonstrated that high-density IR heating could be a tool for altering and sealing the surface porosity of fused silica. However, the process was not very cost-effective. (2) A low-cost glaze composition having a coefficient of thermal expansion (CTE) similar to that of a DFS tube was identified and was successfully tested for its integrity and adherence to DFS. Although the glaze acted as a barrier between the molten aluminum and the DFS, persistent porosity and crazing within the glaze affected its performance during the reactivity tests, thus acting as an obstacle in scaling up production of this glaze. (3) Pyrotek's XL glaze showed great success in improving the life of the DFS tubes. Pyrotek has reported an increasing market demand for the XL-coated DFS tubes, which exhibit useful lifetimes three times better than those of uncoated tubes. (4) A computer model to optimize particle size distribution for reduced permeability was developed and successfully applied to casting formulations. Silica riser tubes produced using these new formulations have been tested in a commercial aluminum casting facility and have been reported to increase the life of the DFS tubes by 700%. (5) If all the DFS riser tubes used in LPD casting of aluminum automotive components are replaced with the better, longer-lasting castable riser tubes, the potential national energy savings is estimated to be 206 billion Btu/year.

Dale E. Brown (Pyrotek); Puja B. Kadolkar (ORNL)

2005-12-15T23:59:59.000Z

405

Modeling regional end user price/cost relationships in a widespread interconnected power system  

SciTech Connect

A combined programming and regression modeling approach is developed to analyze regional retail price/cost relationships for a widespread interconnected power system characterized by low population density and uniform (regulated) retail tariffs. The programming model is designed to calculate on the hour the delivered cost of electricity from 5 thermal power stations and one pumped storage hydrostation to end users in 8 distribution regions. A simultaneous equation regression model then analyses the link between retail prices charged end users, regional demand and supply characteristics, industry financial objectives and departures from economically efficient pricing. The electricity supply industry in Queensland Australia is used as a framework.

Tamaschke, R.; Docwra, G.; Stillman, R. [Univ. of Queensland, Brisbane, Queensland (Australia)

1995-11-01T23:59:59.000Z

406

DOE geothermal R&D program focused on facilitating long-term, cost-effective private resource development  

SciTech Connect

Analyses conducted in support of the National Energy Strategy projected that as much as 22,000 megawatts of cost-effective, moderate-temperature geothermal energy are available to the U.S. over the long-term, or to the year 2030. Thus, the primary hydrothermal technology research goal of the Department's Geothermal Division is to facilitate the ability of the private sector to exploit competitively this large source of energy up to that capacity level or greater. The primary mechanism for implementing this goal is an R&D core program cost-shared with industry focused on major cost-sensitive technology areas: exploration technology, reservoir engineering and management, and drilling. The NES analyses also indicated that electricity generated with energy derived from hot dry rock could be a geographically dispersed, logical follow-on to hydrothermal electricity in the longer term. In order to demonstrate whether energy at useful temperatures can be extracted over extended periods at competitive energy prices, a long-term flow test of an experimental HDR system will be conducted. This paper describes DOE's current participation in R&D activities leading to the development of ''cutting edge'' technology that will serve the geothermal industry's interest well into the next century.

Mock, John E.

1992-01-01T23:59:59.000Z

407

A cost-effective and fuel-conserving nonelectric air conditioner that combines engine-driven compression and absorption cycles  

SciTech Connect

A natural-gas-fueled electricity-producing condensing furnace with the potential of being mass produced at a cost of less than $1000 and providing a cost-effective and highly fuel-conserving alternative to virtually every residential gas furnace in the world has been developed. While this is a new system, it completely consists of existing mass-produced components including single-cylinder air-cooled engines, induction motors/generators, and control devices. Thus, timely commercialization can be expected and an important new energy technology and industry can result. However, all the benefits of this electricity-producing furnace occur during the winter. This has stimulated the search for a new system that can provide comparable benefits in terms of fuel conservation, the environment, and electric utility peak reduction during the summer, along with the prospects of a new and efficient new use for the natural gas surpluses that occur during the summer. The resulting system, which can use existing component equipment, is a commercial-size nonelectric air conditioner that consists of an automobile-type engine converted to natural gas, or possibly a diesel or combustion turbine, driving a Freon compression cycle, with virtually all of the engine reject heat from the exhaust and from the engine cooling system driving a conventional absorption air conditioning cycle.

Wicks, F.

1988-01-01T23:59:59.000Z

408

Improving the Cost-Effectiveness of Artificial Visual Baits for Controlling the Tsetse Fly Glossina fuscipes fuscipes  

E-Print Network (OSTI)

Tsetse flies, which transmit sleeping sickness to humans and nagana to cattle, are commonly controlled by stationary artificial baits consisting of traps or insecticide-treated screens known as targets. In Kenya the use of electrocuting sampling devices showed that the numbers of Glossina fuscipes fuscipes (Newstead) visiting a biconical trap were nearly double those visiting a black target of 100 cm6100 cm. However, only 40 % of the males and 21 % of the females entered the trap, whereas 71 % and 34%, respectively, alighted on the target. The greater number visiting the trap appeared to be due to its being largely blue, rather than being three-dimensional or raised above the ground. Through a series of variations of target design we show that a blue-and-black panel of cloth (0.06 m 2) flanked by a panel (0.06 m 2) of fine black netting, placed at ground level, would be about ten times more cost-effective than traps or large targets in control campaigns. This finding has important implications for controlling all subspecies of G. fuscipes, which are currently responsible for more than 90 % of sleeping sickness cases.

Jenny M. Lindh; Steve J. Torr; Glyn A. Vale; Mike J. Lehane

2009-01-01T23:59:59.000Z

409

Optimal Materials and Deposition Technique Lead to Cost-Effective Solar Cell with Best-Ever Conversion Efficiency (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet describes how the SJ3 solar cell was invented, explains how the technology works, and why it won an R&D 100 Award. Based on NREL and Solar Junction technology, the commercial SJ3 concentrator solar cell - with 43.5% conversion efficiency at 418 suns - uses a lattice-matched multijunction architecture that has near-term potential for cells with {approx}50% efficiency. Multijunction solar cells have higher conversion efficiencies than any other type of solar cell. But developers of utility-scale and space applications crave even better efficiencies at lower costs to be both cost-effective and able to meet the demand for power. The SJ3 multijunction cell, developed by Solar Junction with assistance from foundational technological advances by the National Renewable Energy Laboratory, has the highest efficiency to date - almost 2% absolute more than the current industry standard multijunction cell-yet at a comparable cost. So what did it take to create this cell having 43.5% efficiency at 418-sun concentration? A combination of materials with carefully designed properties, a manufacturing technique allowing precise control, and an optimized device design.

Not Available

2012-07-01T23:59:59.000Z

410

Assessing the Battery Cost at Which Plug-In Hybrid Medium-Duty Parcel Delivery Vehicles Become Cost-Effective  

DOE Green Energy (OSTI)

The National Renewable Energy Laboratory (NREL) validated diesel-conventional and diesel-hybrid medium-duty parcel delivery vehicle models to evaluate petroleum reductions and cost implications of hybrid and plug-in hybrid diesel variants. The hybrid and plug-in hybrid variants are run on a field data-derived design matrix to analyze the effect of drive cycle, distance, engine downsizing, battery replacements, and battery energy on fuel consumption and lifetime cost. For an array of diesel fuel costs, the battery cost per kilowatt-hour at which the hybridized configuration becomes cost-effective is calculated. This builds on a previous analysis that found the fuel savings from medium duty plug-in hybrids more than offset the vehicles' incremental price under future battery and fuel cost projections, but that they seldom did so under present day cost assumptions in the absence of purchase incentives. The results also highlight the importance of understanding the application's drive cycle specific daily distance and kinetic intensity.

Ramroth, L. A.; Gonder, J. D.; Brooker, A. D.

2013-04-01T23:59:59.000Z

411

Candidate alloys for cost-effective, high-efficiency, high-temperature compact/foil heat-exchangers  

SciTech Connect

Solid oxide fuel cell (SOFC) and molten carbonate fuel cell (MCFC) systems operate at high temperatures (up to 1000 C and 650 C, respectively), which makes them especially attractive sources for combined heat and power (CHP) cogeneration. However, improvements in the efficiency of heat exchange in these fuel cells require both development and careful processing of advanced cost-effective alloys for use in such high-temperature service conditions. The high-temperature properties of both sheet and foil forms of several alloys being considered for use in compact heat-exchangers (recuperators) have been characterized. Mechanical and creep-rupture testing, oxidation studies, and microstructural studies have been performed on commercially available sheet and foil forms of alloy 347, alloys 625, HR230, HR120, and the new AL20-25+Nb. These studies have led to a mechanistic understanding of the responses of these alloys to anticipated service conditions, and suggest that these alloys developed for gas- and micro-turbine recuperator applications are also suitable for use in fuel cell heat-exchangers. Additional work is still required to achieve foil forms with creep life comparable to thicker-section wrought product forms of the same alloys.

Evans, Neal D [ORNL; Maziasz, Philip J [ORNL; Shingledecker, John P [ORNL; Pint, Bruce A [ORNL; Yamamoto, Yukinori [ORNL

2007-01-01T23:59:59.000Z

412

Cost-effective solar collectors using heat pipes. Interim progress report No. 1, September 1977-March 1978  

DOE Green Energy (OSTI)

The objective is the demonstration of high performance, cost effective non-concentrating solar collectors using heat pipes. The end products will be directly applicable for efficient use with absorption and Rankine cycle chillers. Evacuated tubular solar collectors were selected as the only economical non-concentrating approach capable of efficient operation of chillers. The General Electric TC family of collectors was chosen because of their superior performance and compatibility with heat pipe integration. The system was designed and specified. This work included the integration of the heat pipe with the evacuated tubular solar collector and the pumped loop heat removal mechanism. To date, two heat pipe fluid-envelope combinations look attractive: water-aluminum bearing steel and ethanol-low carbon steel. The jury is still out on the ability for the water-aluminum bearing steel to survive freezing cycles and for ethanol-low carbon steel to withstand predicted 400/sup 0/C stagnation temperatures. Full scale cost analysis was not completed for either case. Two 4' x 4' panels, each with ten tubular collectors fitted with heat pipes, were erected at Thermacore to test various aspects of the heat pipe and its integration into the collector-pumped loop system.

Ernst, D.M.

1978-01-01T23:59:59.000Z

413

Deployment Effects of Marine Renewable Energy Technologies: Wave Energy Scenarios  

SciTech Connect

Given proper care in siting, design, deployment, operation and maintenance, wave energy conversion could become one of the more environmentally benign sources of electricity generation. In order to accelerate the adoption of these emerging hydrokinetic and marine energy technologies, navigational and environmental concerns must be identified and addressed. All developing hydrokinetic projects involve a wide variety of stakeholders. One of the key issues that site developers face as they engage with this range of stakeholders is that, due to a lack of technical certainty, many of the possible conflicts (e.g., shipping and fishing) and environmental issues are not well-understood,. In September 2008, re vision consulting, LLC was selected by the Department of Energy (DoE) to apply a scenario-based assessment to the emerging hydrokinetic technology sector in order to evaluate the potential impact of these technologies on the marine environment and navigation constraints. The projects scope of work includes the establishment of baseline scenarios for wave and tidal power conversion at potential future deployment sites. The scenarios capture variations in technical approaches and deployment scales to properly identify and characterize environmental effects and navigational effects. The goal of the project is to provide all stakeholders with an improved understanding of the potential range of technical attributes and potential effects of these emerging technologies and focus all stakeholders on the critical issues that need to be addressed. By identifying and addressing navigational and environmental concerns in the early stages of the industrys development, serious mistakes that could potentially derail industry-wide development can be avoided. This groundwork will also help in streamlining siting and associated permitting processes, which are considered key hurdles for the industrys development in the U.S. today. Re vision is coordinating its efforts with two other project teams funded by DoE which are focused on regulatory issues (Pacific Energy Ventures) and navigational issues (PCCI). The results of this study are structured into three reports: (1) Wave power scenario description (2) Tidal power scenario description (3) Framework for Identifying Key Environmental Concerns This is the first report in the sequence and describes the results of conceptual feasibility studies of wave power plants deployed in Humboldt County, California and Oahu, Hawaii. These two sites contain many of the same competing stakeholder interactions identified at other wave power sites in the U.S. and serve as representative case studies. Wave power remains at an early stage of development. As such, a wide range of different technologies are being pursued by different manufacturers. In order to properly characterize potential effects, it is useful to characterize the range of technologies that could be deployed at the site of interest. An industry survey informed the process of selecting representative wave power devices. The selection criteria requires that devices are at an advanced stage of development to reduce technical uncertainties, and that enough data are available from the manufacturers to inform the conceptual design process of this study. Further, an attempt is made to cover the range of different technologies under development to capture variations in potential environmental effects. Table 1 summarizes the selected wave power technologies. A number of other developers are also at an advanced stage of development, but are not directly mentioned here. Many environmental effects will largely scale with the size of the wave power plant. In many cases, the effects of a single device may not be measurable, while larger scale device arrays may have cumulative impacts that differ significantly from smaller scale deployments. In order to characterize these effects, scenarios are established at three deployment scales which nominally represent (1) a small pilot deployment, (2) a small commercial deployment, and (3) a large commercial sc

Mirko Previsic

2010-06-17T23:59:59.000Z

414

Community Renewable Energy Deployment: Haxtun Wind Project | Open Energy  

Open Energy Info (EERE)

Haxtun Wind Project Haxtun Wind Project Jump to: navigation, search Name Community Renewable Energy Deployment: Haxtun Wind Project Agency/Company /Organization US Department of Energy Focus Area Economic Development, Renewable Energy, Wind Phase Evaluate Options, Get Feedback, Develop Finance and Implement Projects Resource Type Case studies/examples Availability Publicly Available--Free Publication Date 2/7/2011 Website http://www1.eere.energy.gov/co Locality Phillips County, Colorado References Community Renewable Energy Deployment: Haxtun Wind Project[1] Contents 1 Overview 2 Highlights 3 Environmental Aspects 4 Related Tools 5 References Overview This short case study describes Phillips County's Haxtun Wind Project efforts through the Department of Energy's Community Renewable Energy

415

DOE Simulator Training to Brazil's Petrobas Advances Goal of Deploying  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Simulator Training to Brazil's Petrobas Advances Goal of DOE Simulator Training to Brazil's Petrobas Advances Goal of Deploying Clean Coal Technology at Home and Abroad DOE Simulator Training to Brazil's Petrobas Advances Goal of Deploying Clean Coal Technology at Home and Abroad September 25, 2012 - 1:00pm Addthis Washington, DC - A recently-completed comprehensive Department of Energy (DOE) training initiative using an innovative high-fidelity combined-cycle dynamic simulator has provided employees of a Brazilian multi-national company the opportunity to learn to operate and control the near-zero-emission power plants critical to a cleaner energy future. The 8-day course for power plant operators from Petrobras used a simulator from the National Energy Technology Laboratory (NETL)-sponsored AVESTAR™ (Advanced Virtual Energy Simulation Training and Research) Center.

416

Technology Development, Growth, and Deployment | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Development, Technology Development, Growth, and Deployment Technology Development, Growth, and Deployment A look at our resources: This map shows the location of our National Laboratories with links to their Technology Transfer programs; the locations of our i6 Green Challenge grant recipients; and the nation's Minority Serving Institutions. Our office works to engage the research and innovation at Minority Serving Institutions with the resources of our National Labs. Early stage energy technologies face a number of challenges in transitioning for basic research to market solutions. The Energy Department has created specific initiatives in order to address the commercialization challenges that energy efficient and renewable energy technologies must face. These initiatives are developed to launch emerging

417

ARM - Publications: Science Team Meeting Documents: Testing and Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing and Deployment of an Infrared Thermometer Network at the ARM Testing and Deployment of an Infrared Thermometer Network at the ARM Southern Great Plains Climate Research Facility Morris, Victor Pacific Northwest National Laboratory Long, Chuck Pacific Northwest National Laboratory To increase our ability to calculate heating rate profiles to study the variability across the Global Climate Model scale area and for inferring information about distribution and character of cloudiness across the Southern Great Plains (SGP) domain, downwelling Infrared Thermometers (IRT) will be installed at the SGP Extended Facilities (EF). Initially, IRTs will be installed at five of the twenty-one EFs and one at the Central Facility (CF). The sky brightness temperature measurements will be sampled at a rate of 5 Hz to capture the inherent variability under cloudy and partly cloudy

418

DOE Report Describes Progress in the Deployment of Synchrophasor  

Open Energy Info (EERE)

DOE Report Describes Progress in the Deployment of Synchrophasor DOE Report Describes Progress in the Deployment of Synchrophasor Technologies for Improved Grid Operations Home > Blogs > Graham7781's blog Graham7781's picture Submitted by Graham7781(1992) Super contributor 15 August, 2013 - 09:09 OpenEI PMU recovery act SGIG Smart Grid The U.S. Department of Energy's (DOE) Office of Electricity Delivery and Energy Reliability (OE) is pleased to announce the publication of a new report from the Smart Grid Investment Grant (SGIG) and Smart Grid Demonstration programs (SGDP), which are grid modernization activities funded by the American Recovery and Reinvestment Act of 2009 (Recovery Act). Twelve projects are installing synchrophasor technologies and systems across the country and beginning to use various on-line and off-line

419

Community Renewable Energy Deployment: University of California at at Davis  

Open Energy Info (EERE)

at at Davis at at Davis Project Jump to: navigation, search Name Community Renewable Energy Deployment: University of California at at Davis Project Agency/Company /Organization US Department of Energy Focus Area Energy Efficiency, Greenhouse Gas, Grid Assessment and Integration, Other, Renewable Energy, Biomass - Anaerobic Digestion, Solar - Concentrating Solar Power, Hydrogen and Fuel Cells, - Solar Pv, Biomass - Waste To Energy Phase Develop Finance and Implement Projects Resource Type Case studies/examples Availability Publicly available--Free Publication Date 2/2/2011 Website http://www1.eere.energy.gov/co Locality University of California at Davis References Community Renewable Energy Deployment: University of California at at Davis Project[1] Contents

420

Cost-effectiveness of plug-in hybrid electric vehicle battery capacity and charging infrastructure investment for reducing US gasoline consumption  

E-Print Network (OSTI)

Cost-effectiveness of plug-in hybrid electric vehicle battery capacity and charging infrastructure online 22 October 2012 Keywords: Plug-in hybrid electric vehicle Charging infrastructure Battery size a b for plug-in hybrid electric vehicles as alternate methods to reduce gasoline consumption for cars, trucks

McGaughey, Alan

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A deployed multi-agent framework for distributed energy applications  

Science Conference Proceedings (OSTI)

In this paper, we describe the adaptation of an open-source multi-agent platform for distributed energy applications and the trial deployment of resource-controller agents. The platform provides real-time, two-way communication and decision making between ... Keywords: applications of autonomous agents and multi-agent systems, collective and emergent agent behavior, frameworks, infrastructures and environments for agent systems

Geoff James; Dave Cohen; Robert Dodier; Glenn Platt; Doug Palmer

2006-05-01T23:59:59.000Z

422

Abstract Deployment of an AEC industry sector product model  

E-Print Network (OSTI)

widely adopted within the steel construction industry. CIS/2 is an early success story of broad use of a product model for both data exchange and improving the productivity of those companies taking advantage of its capabilities. Here, we review the history of CIS/2, the methods and issues arising from its deployment, the benefits it has thus far realized and the research issues these activities have identified.

C. Eastman; F. Wang; S. -j. You; D. Yang

2004-01-01T23:59:59.000Z

423

Solar Photovoltaic Financing: Deployment by Federal Government Agencies  

DOE Green Energy (OSTI)

The goal of this report is to examine how federal agencies can finance on-site PV projects. It explains state-level cash incentives available, the importance of solar renewable energy certificate revenues (in certain markets), existing financing structures, as well as innovative financing structures being used by federal agencies to deploy on-site PV. Specific examples from the DOD, DOE, and other federal agencies are highlighted to explain federal project financing in detail.

Cory, K.; Coggeshall, C.; Coughlin, J.; Kreycik, C.

2009-07-01T23:59:59.000Z

424

Stochastic Energy Deployment System (SEDS) | Open Energy Information  

Open Energy Info (EERE)

Stochastic Energy Deployment System (SEDS) Stochastic Energy Deployment System (SEDS) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Stochastic Energy Deployment System (SEDS) Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Topics: Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.nrel.gov/analysis/analysis_tools_cross.html#seds Country: United States Northern America Coordinates: 37.09024°, -95.712891° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.09024,"lon":-95.712891,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

425

Optimization of Hydroacoustic Deployments at John Day Dam  

DOE Green Energy (OSTI)

This report describes short-term studies conducted in late November and early December 2001 to optimize hydroacoustic sampling techniques for John Day Dam before the 2002 fish passage efficiency (FPE) study. Knowledge gained in this study should significantly improve hydroacoustic sampling and the accuracy of estimates of fish passage at two locations that have presented problems in past studies. The spillway has been most problematic because many fish detected there were not entrained. Without correction, non-commitment of fish can result in multiple detections and overestimation of fish passage and FPE. Trash-rack-mounted, down-looking transducers for sampling unguided fish at a submerged traveling screen (STS) also have posed problems because the beam was aimed so far downstream that researchers had concerns about fish aspect and detectability. The deployments, aiming angles, and ping rates described here should eliminate all problems encountered in previous studies. This report describes hydroacoustic evaluations. The spill-bay deployment identified in this study should completely eliminate multiple detections of fish by limiting the sample volume for counting fish to the deep high-discharge volume adjacent to the gate. Results from testing of transducers deployed in a turbine intake with an STS suggest that, after testing in 2002, it may be possible to cut the number of powerhouse transducers sampling STS units by 50% or to double the spatial sampling coverage with the same number of transducers, all while improving detectability.

Ploskey, Gene R.; Cook, Christopher B.; Titzler, P. Scott; Moursund, Russell A.

2002-11-12T23:59:59.000Z

426

Federal and State Incentives for Early Commercial Deployment  

E-Print Network (OSTI)

supported research and development (R&D) on coal gasification, Integrated Gasification Combined Cycle (IGCC) technology, and associated carbon capture and storage (CCS) methods. As a result of these joint efforts, the application of IGCC and CCS to electric power generation and related energy markets is at the beginning of commercial deployment. Due to technological successes already achieved and unique capabilities relative to competitive technologies, there is currently a very high level of interest in IGCC, CCS, and associated gasification-based technologies. This interest is, in part, a result of evolving Federal and state strategic energy policy goals that encourage the commercial deployment of advanced fossil energy supply technologies to enhance fuel diversity, domestic energy security, environmental footprint and climate change mitigation, while sustaining efficient utilization of domestic resources. This is the second of two Technical Forum discussions on IGCC/CCS and focuses primarily on the Federal and State incentives offered to encourage technology deployment. Federal energy policy towards IGCC is most recently and clearly established in the Energy Policy Act of 2005, which authorizes continued RD&D support and strengthens financial incentives to enhance the competitiveness of early commercial IGCC/CCS projects and encourage use of a broad range of coal types, project locations, and plant designs. State policies supporting IGCC/CCS come in the form of legislation and regulations that provide technology development

I. Background

2006-01-01T23:59:59.000Z

427

Phytophthora capsici - Loss of Heterozygosity (LOH): A Widespread Mechanism for Rapid Adaptation ( 7th Annual SFAF Meeting, 2012)  

Science Conference Proceedings (OSTI)

Joanne Mudge on "Phytophthora capsici - Loss of Heterozygosity (LOH): A Widespread Mechanism for Rapid Mutation" at the 2012 Sequencing, Finishing, Analysis in the Future Meeting held June 5-7, 2012 in Santa Fe, New Mexico.

Mudge, Joanne [NCGR

2012-06-01T23:59:59.000Z

428

QUARTERLY NUCLEAR POWER DEPLOYMENT SUMMARY JULY 2013 News Updates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 News Updates  Dominion Resources, Inc. has informed the NRC that Dominion Virginia Power will amend its COL application to reflect the ESBWR technology by the end of 2013. In 2009 Dominion dropped the ESBWR from its COLA after failing to reach a commercial agreement with General Electric-Hitachi (GEH). A COL is expected no earlier than late 2015. Dominion Virginia Power has not yet committed to building a new nuclear unit at North Anna.  NRC has determined that the latest revision to the South Texas Project COLA does not alleviate foreign interest concerns; the staff found that despite having only a 10% ownership stake in Nuclear Innovation North America LLC (NINA), Toshiba American Nuclear Energy Corporation's financing of all project costs effectively resulted in control and domination of NINA. The COL review remains active while NINA considers its options

429

Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Deployment of Hybrid Deployment of Hybrid and Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on Twitter Bookmark Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on Google Bookmark Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on Delicious Rank Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on Digg Find More places to share Alternative Fuels Data Center: Deployment of Hybrid and Plug-In Electric Vehicles on AddThis.com... More in this section... Electricity Basics Benefits & Considerations

430

Designing and testing the neutron source deployment system and calibration plan for a dark matter detector  

E-Print Network (OSTI)

In this thesis, we designed and tested a calibration and deployment system for the MiniCLEAN dark matter detector. The deployment system uses a computer controlled winch to lower a canister containing a neutron source into ...

Westerdale, Shawn (Shawn S.)

2011-01-01T23:59:59.000Z

431

Nevada Deploys First U.S. Commercial, Grid-Connected Enhanced...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home Nevada Deploys First U.S. Commercial, Grid-Connected Enhanced Geothermal System Nevada Deploys First U.S. Commercial, Grid-Connected Enhanced Geothermal...

432

Search-based genetic optimization for deployment and reconfiguration of software in the cloud  

Science Conference Proceedings (OSTI)

Migrating existing enterprise software to cloud platforms involves the comparison of competing cloud deployment options (CDOs). A CDO comprises a combination of a specific cloud environment, deployment architecture, and runtime reconfiguration rules ...

Sren Frey, Florian Fittkau, Wilhelm Hasselbring

2013-05-01T23:59:59.000Z

433

Strategies for the Commercialization & Deployment of GHG Intensity-Reducing Technologies & Practices  

Energy.gov (U.S. Department of Energy (DOE))

This report looks at the best methods of commercializing and deploying energy technologies that reduce greenhouse gas intensity.

434

A Small Secure Transportable Autonomous Lead-Cooled Fast Reactor for Deployment at Remote Sites  

Science Conference Proceedings (OSTI)

This presentation discusses a small secure transportable autonomous lead-cooled fast reactor for deployment at remote sites.

Sienicki, J .J.; Smith, M.A.; Mosseytsev, A.V.; Yang, W.S.; Wade, D.C.

2004-10-06T23:59:59.000Z

435

Commercialization and Deployment at NREL: Advancing Renewable Energy and Energy Efficiency at Speed and Scale  

SciTech Connect

A White Paper overview of NREL's commercialization and deployment activities, requested by the chair of the State Energy Advisory Board.

Not Available

2011-05-11T23:59:59.000Z

436

Deployable telescope having a thin-film mirror and metering structure  

Science Conference Proceedings (OSTI)

A deployable thin-film mirror telescope comprises a base structure and a metering structure. The base structure houses a thin-film mirror, which can be rolled for stowage and unrolled for deployment. The metering structure is coupled to the base structure and can be folded for stowage and unfolded for deployment. In the deployed state, the unrolled thin-film mirror forms a primary minor for the telescope and the unfolded metering structure positions a secondary minor for the telescope.

Krumel, Leslie J. (Cedar Crest, NM); Martin, Jeffrey W. (Albuquerque, NM)

2010-08-24T23:59:59.000Z

437

Final Report: Development of Renewable Microbial Polyesters for Cost Effective and Energy- Efficient Wood-Plastic Composites  

SciTech Connect

In this project, we proposed to produce wood fiber reinforced thermoplastic composites (WFRTCs) using microbial thermoplastic polyesters in place of petroleum-derived plastic. WFRTCs are a rapidly growing product area, averaging a 38% growth rate since 1997. Their production is dependent on substantial quantities of petroleum based thermoplastics, increasing their overall energy costs by over 230% when compared to traditional Engineered Wood Products (EWP). Utilizing bio-based thermoplastics for these materials can reduce our dependence on foreign petroleum. We have demonstrated that biopolymers (polyhydroxyalkanoates, PHA) can be successfully produced from wood pulping waste streams and that viable wood fiber reinforced thermoplastic composite products can be produced from these materials. The results show that microbial polyester (PHB in this study) can be extruded together with wastewater-derived cell mass and wood flour into deck products having performance properties comparable to existing commercial HDPE/WF composite products. This study has thus proven the underlying concept that the microbial polyesters produced from waste effluents can be used to make cost-effective and energy-efficient wood-plastic composites. The cost of purified microbial polyesters is about 5-20 times that of HDPE depending on the cost of crude oil, due to high purification (40%), carbon substrate (40%) and sterilized fermentation (20%) costs for the PHB. Hence, the ability to produce competitive and functional composites with unpurified PHA-biomass mixtures from waste carbon sources in unsterile systemswithout cell debris removalis a significant step forward in producing competitive value-added structural composites from forest products residuals using a biorefinery approach. As demonstrated in the energy and waste analysis for the project, significant energy savings and waste reductions can also be realized using this approach. We recommend that the next step for development of useful products using this technology is to scale the technology from the 700-L pilot reactor to a small-scale production facility, with dedicated operation staff and engineering controls. In addition, we recommend that a market study be conducted as well as further product development for construction products that will utilize the unique properties of this bio-based material.

David N. Thompson, Robert W. Emerick, Alfred B. England, James P. Flanders, Frank J. Loge, Katherine A. Wiedeman, Michael P. Wolcott

2010-03-31T23:59:59.000Z

438

Application of quality function deployment in the semiconductor industry: A case study  

Science Conference Proceedings (OSTI)

In quality function deployment (QFD), the voice of the customer (VOC) is the critical factor in developing and producing a product that will meet or exceed customer requirements. This study integrates quality function deployment (QFD), management techniques ... Keywords: Customer satisfaction, Process management, Quality function deployment (QFD), Semiconductor industry, Voice of customer

Chee-Cheng Chen

2010-05-01T23:59:59.000Z

439

Constrained multiple deployment problem in wireless sensor networks with guaranteed lifetimes  

Science Conference Proceedings (OSTI)

We aimed to deploy wireless sensor networks with guaranteed lifetimes for outdoor monitoring projects. The provision of a guaranteed lifetime has rarely been studied in previous deployment problems. The use of battery packs as the power source for sensors ... Keywords: Deployment problem, Guaranteed lifetime, Sensor network

Chun-Han Lin; Chung-Ta King; Ting-Yi Chen

2011-02-01T23:59:59.000Z

440

An incremental deployment algorithm for wireless sensor networks using one or multiple autonomous agents  

Science Conference Proceedings (OSTI)

The paper studies the deployment problem of wireless sensor networks using one or multiple autonomous agents. An online incremental algorithm based on Voronoi partition is proposed to solve the problem, for which each agent deploys sensors one-at-a-time ... Keywords: Autonomous agent, Incremental deployment, Sensor network

Zhiyun Lin; Sijian Zhang; Gangfeng Yan

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "widespread cost-effective deployment" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Deployment of Infrastructure and Services in the Open Grid Services Architecture (OGSA)*  

E-Print Network (OSTI)

for automated remote deployment of Grid infrastructure and services across organizations in the Globus middleware stack we trialled Smart- Frog (a 3rd party component deployment technology [14]) for Grid the collection of components developed in the laboratory (a version of Smart- Frog, Grid specific deployment

Emmerich, Wolfgang

442

Market and Policy Barriers to Deployment of Energy Storage  

SciTech Connect

There has recently been resurgent interest in energy storage, due to a number of developments in the electricity industry. Despite this interest, very little storage, beyond some small demonstration projects, has been deployed recently. While technical issues, such as cost, device efficiency, and other technical characteristics are often listed as barriers to storage, there are a number of non-technical and policy-related issues. This paper surveys some of these main barriers and proposes some potential research and policy steps that can help address them. While the discussion is focused on the United States, a number of the findings and observations may be more broadly applicable.

Sioshansi, R.; Denholm, P.; Jenkin, T.

2012-03-01T23:59:59.000Z

443

A Methodology for Developing and Deploying Distributed Applications  

E-Print Network (OSTI)

Abstract. We describe a methodology for developing and deploying distributed Java applications using a reflective middleware system called RAFDA. We illustrate the methodology by describing how it has been used to develop a peer-to-peer infrastructure, and explain the benefits relative to other techniques. The strengths of the approach are that the application logic can be designed and implemented completely independently of distribution concerns, easing the development task, and that this gives great flexibility to alter distribution decisions late in the development cycle. 1

Graham N. C. Kirby; Scott M. Walker; Stuart J. Norcross; Alan Dearle

2005-01-01T23:59:59.000Z

444

Cost Effectiveness of Cleaning Techniques for Controlling Human-based Transport of Invasive Exotic Plants on Electric Transmission Line Rights-of-Way  

Science Conference Proceedings (OSTI)

This Technical Update provides a broad overview of accomplishments over the first full year of the Electric Power Research Institute (EPRI) project to investigate the cost effectiveness of cleaning techniques to control human-based transport of invasive exotic plants on electric transmission line rights-of-way. One-half of the intended field work for the whole project (2012-2015) was completed, with attendant greenhouse and office work ongoing. EPRI expects the project to be completed in ...

2013-11-21T23:59:59.000Z

445

Economics of ALMR deployment in the United States  

SciTech Connect

The Advanced Liquid Metal Reactor (ALMR) has the potential to extend the economic life of the nuclear option and of reducing the number of high-level waste repositories which will eventually be needed in an expanding nuclear economy. This paper reports on an analysis which models and evaluates the economics of the use of ALMRs as a component of this country`s future electricity generation mix. The ALMR concept has the ability to utilize as fuel the fissile material contained in previously irradiated nuclear fuel (i.e., spent fuel) or from surplus weapons-grade material. While not a requirement for the successful deployment of ALMR power plant technology, the reprocessing of spent fuel from light water reactors (LWR) is necessary for any rapid introduction of ALMR power plants. In addition, the reprocessing of LWR spent fuel may reduce the number of high-level waste repositories needed in the future by burning the long-lived actinides produced in the fission process. With this study, the relative economics of a number of potential scenarios related to these issues are evaluated. While not encompassing the full range of all possibilities, the cases reported here provide an indication of the potential costs, timings, and relative economic attractiveness of ALMR deployment.

Delene, J.G.; Fuller, L.C.; Hudson, C.R.

1995-02-01T23:59:59.000Z

446

Scaling up: global technology deployment to stabilize emissions  

SciTech Connect

Climate change is becoming a defining fact of economic development. Three areas need to coalesce into a coherent vision in order to achieve adequate levels of emissions reductions: The technologies involved, including the physical and capacity-related constraints to deploying them; The investment required: who will provide it, the mechanisms they will use, and its cost; The policies that will offer the most effective incentives to providers of both technology and capital to implement lower-emission solutions. A paper by two Princeton researchers Pacala and Socolow provided a mental framework to discuss these solutions by breaking the required emission reductions down into manageable (though still large) 'wedges,' each provided by a different technology or set of technologies. Owing to its solution-oriented framework, the wedges approach has captured the imagination of those eager to tackle climate change. These include among the 15 options: replacing coal baseload power plants with gas plants, capturing CO{sub 2} at coal and gas power plants, capturing CO{sub 2} at coal-to-synfuels plant and increasing use of renewables. This paper presents an overview, using the wedges framework, on how technology, investment and policy interact. It is intended to engage actors in the policy and investment communities as the key enables of clean technology deployment worldwide. 30 refs., 5 figs., 2 tabs.

Fred Wellington; Rob Bradley; Britt Childs; Clay Rigdon; Jonathan Pershing

2007-04-13T23:59:59.000Z

447

COST EFFECTIVE REGULATORY APPROACHES TO ENHANCE DOMESTIC OIL & GAS PRODUCTION AND ENSURE THE PROTECTION OF THE ENVIRONMENT  

Science Conference Proceedings (OSTI)

The Environmental Information Management Suite/Risk Based Data Management System (EIMS/RBDMS) and Cost Effective Regulatory Approach (CERA) programs continue to be successful. All oil and gas state regulatory programs participate in these efforts. Significant accomplishments include: streamline regulatory approaches, enhancing environmental protection, and making oil and gas data available via the Internet. Oil and gas companies worldwide now have access to data on state web sites. This reduces the cost of exploration and enables companies to develop properties in areas that would have been cost prohibited for exploration. Early in project, GWPC and State Oil and Gas agencies developed the EIMS and CERA strategic plan to prioritize long term development and implementation. The planning process identifies electronic commerce and coal bed methane as high priorities. The group has involved strategic partners in industry and government to develop a common data exchange process. Technical assistance to Alaska continues to improve their program management capabilities. New initiatives in Alaska include the development of an electronic permit tracking system. This system allows managers to expedite the permitting process. Nationwide, the RBDMS system is largely completed with 22 states and one Indian Nation now using this nationally accepted data management system. Additional remaining tasks include routine maintenance and the installation of the program upon request for the remaining oil and gas states. The GWPC in working with the BLM and MMS to develop an XML schema to facilitate electronic permitting and reporting (Appendix A, B, and C). This is a significant effort and, in years to come, will increase access to federal lands by reducing regulatory barriers. The new initiatives are coal bed methane and e-commerce. The e-commerce program will provide industry and BLM/MMS access to the millions of data points housed in the RBDMS system. E-commerce will streamline regulatory approaches and allow small operators to produce energy from areas that have become sub-economic for the major producers. The GWPC is working with states to develop a coal bed methane program, which will both manage the data and develop a public education program on the benefits of produced water. The CERA program benefits all oil and gas states by reducing the cost of regulatory compliance, increasing environmental protection, and providing industry and regulatory agencies a discussion forum. Activities included many small and large group forum settings for discussions of technical and policy issues as well as the ongoing State Class II UIC peer review effort. The accomplishments detailed in this report will be the basis for the next initiative which is RBDMS On-Line. RBDMS On-Line will combine data mining, electronic permitting and electronic reporting with .net technology. Industry, BLM, GWPC and all Oil and Gas states are partnering this effort.

Ben Grunewald; Paul Jehn; Tom Gillespie; Ben Binder

2004-12-21T23:59:59.000Z

448

Deployment of Demand Response as a Real-Time Resource in Organized Markets  

Open Energy Info (EERE)

Deployment of Demand Response as a Real-Time Resource in Organized Markets Deployment of Demand Response as a Real-Time Resource in Organized Markets Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Deployment of Demand Response as a Real-Time Resource in Organized Markets Focus Area: Crosscutting Topics: Potentials & Scenarios Website: www.sciencedirect.com/science/article/pii/S1040619008000973 Equivalent URI: cleanenergysolutions.org/content/deployment-demand-response-real-time- Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Technical Assistance Regulations: Resource Integration Planning This article examines the use of demand response as a dispatchable resource

449

Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Smith Dairy Deploys Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest to someone by E-mail Share Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest on Facebook Tweet about Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest on Twitter Bookmark Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest on Google Bookmark Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest on Delicious Rank Alternative Fuels Data Center: Smith Dairy Deploys Natural Gas Vehicles and Fueling Infrastructure in the Midwest on Digg

450

Quarterly Nuclear Deployment Summary, January 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2012 January 2012 Quarterly Nuclear Deployment Summary, January 2012 January 30, 2012 - 1:10pm Addthis Quarterly News The U.S. NRC voted to approve the amended AP1000 design certification on December 22, 2011. The Commission also announced the rule would be effective immediately after it was published in the Federal Register on December 30, 2011. A final rule for the GE-ABWR design certification amendment was approved and published in the Federal Register on December 16, 2011. The rule will become effective January 17, 2012. The condenser for Vogtle Unit 3 has been completed by Japan's Toshiba and began its journey from Sacheon to Savannah, Georgia on November 21. The condenser marks the first major component Toshiba has shipped for the new generation of U.S nuclear power plants.

451

Quarterly Nuclear Deployment Summary, October 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 2012 October 2012 Quarterly Nuclear Deployment Summary, October 2012 October 30, 2012 - 8:58am Addthis Quarterly Updates On August 7, NRC issued an order halting issuance of any new construction licenses or license renewals until the Commission can respond to a June 8 court ruling striking down the NRC's waste confidence rule, which assumes that a waste repository will be available "when necessary"; reviews of license applications will continue and the order does not apply to design certifications. On September 6, NRC directed the agency's staff to develop an environmental impact statement (EIS) and a revised waste confidence decision and rule on the temporary storage of spent nuclear fuel. The EIS and rule are to be completed within 24 months. Due to low natural gas prices and unfavorable economic conditions,

452

Quarterly Nuclear Deployment Summary, July 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 2012 July 2012 Quarterly Nuclear Deployment Summary, July 2012 July 30, 2012 - 3:27pm Addthis Quarterly News The final ruling on the design certification for Mitsubishi Heavy Industries' APWR has been revised until 2015. Structural changes were made to the design by vendor, which requires a new seismic analysis to be performed. Because of this, the review schedule for the COL applications for Comanche Peak and North Anna has been delayed by approximately 18 months. The final ruling on Areva's EPR design certification has been revised from June 2013 until the end of 2014. The change is to allow Areva to respond to outstanding technical issues and provide additional information related to post-Fukushima requirements. DOE released a funding opportunity announcement on March, 22 2012 to

453

Combined Heat & Power Technology Overview and Federal Sector Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Overview and Overview and Federal Sector Deployment Federal Utility Partnership Working Group Spring 2013 - May 22-23 San Francisco, CA Hosted by: Pacific Gas and Electric Company Bob Slattery Oak Ridge National Laboratory CHP is an integrated energy system that:  is located at or near a facility  generates electrical and/or mechanical power  recovers waste heat for ◦ heating ◦ cooling ◦ dehumidification  can utilize a variety of technologies and fuels  is also referred to as cogeneration The on-site simultaneous generation of two forms of energy (heat and electricity) from a single fuel/energy source Defining Combined Heat and Power (CHP) Steam Electricity Fuel Prime Mover & Generator Heat Recovery Steam Boiler Conventional CHP

454

Challenges with SMUDs Community Renewable Energy Project Deployment  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Challenges with SMUD's Community Challenges with SMUD's Community Renewable Energy Project Deployment Elaine Sison-Lebrilla Webinar August 21, 2012 Powering forward. Together. Overview 2  SMUD  Policy Drivers  Renewable Mix  Project Description  Challenges & Status  Lessons Learned 3 Sacramento Municipal Utility District  Publicly Owned Utility, elected Board of Directors  Sacramento County (and Placer County), almost 600,000 customers, 1.4 million population  Aggressive 23.9% Renewable supply by 2010; 37% by 2020  GHG Reductions by 2050 (10% of 1990 levels, <350,000 metric tonnes/year)  California Solar Initiative-125 MW  Feed-In Tariff (100MW in Contracts) 4 Renewable Goals  Aggressive renewable energy goals 4 Program 2010

455

Microsoft PowerPoint - PARS II Deployment Discussion 20090416.ppt  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PARS II PARS II Deployment Discussion John Makepeace (OECM) Kai Mong (EES), Judith Bernsen (EES/PMC) April 16, 2009 2 Purpose * Review inclusion/exclusion of projects * Discuss the proposed schedule for transitioning projects PARS II Timeline 3 Target Dates * May 2009 - DOE-wide announcement * May 2009 - Contact Group 1 * Sep 2009 - Error free files from Group 1 * Dec 2009 - Group 1 repeatable process established * Feb 2010 - Groups 1-3 begin reporting * Sep 2010 - Group 9 begins reporting 4 5 Exclusion Criteria * Project was excluded if * Planned CD-4 date was on or before Sep 30 2010 * Project was at CD-0 or CD-1 with no planned CD-2 date on or before Sep 30 2010 * Project at CD-3 and more than 50% complete (schedule) * Project TPC < $20M 6 Grouping Criteria * Projects were grouped using the following

456

Fuel Cell Electric Vehicles and Hydrogen Infrastructure: Deployment and Issues  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Vehicles and Hydrogen Electric Vehicles and Hydrogen Infrastructure: Deployment and Issues Bill Elrick California Fuel Cell Partnership 3/19/2013 The cars are coming HyundaiTucson ix35 FCEV production launch 2/26/13 Daimler/Nissan/Ford joint development announces 2017 launch of affordable FCEV 1/28/13 Toyota partnership with BMW 1/24/2013 Toyota announces sedan-type FCEV launch in 2015 9/24/12 The buses are coming HyundaiTucson ix35 FCEV production launch 2/26/13 Daimler/Nissan/Ford joint development announces 2017 launch of affordable FCEV 1/28/13 Toyota partnership with BMW 1/24/2013 Toyota announces sedan-type FCEV launch in 2015 9/24/12 Fuel Cell Buses too! * CA Roadmap * National Strategy paper CaFCP 2013 Zero emission vehicles in California ZEV Regulation - (www.arb.ca.gov/msprog/zevprog/zevprog.htm)

457

Quarterly Nuclear Deployment Scorecard - October 2012 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 2012 October 2012 Quarterly Nuclear Deployment Scorecard - October 2012 News Updates On August 7, NRC issued an order halting issuance of any new construction licenses or license renewals until the Commission can respond to a June 8 court ruling striking down the NRC's waste confidence rule, which assumes that a waste repository will be available "when necessary"; reviews of license applications will continue and the order does not apply to design certifications. On September 6, NRC directed the agency's staff to develop an environmental impact statement (EIS) and a revised waste confidence decision and rule on the temporary storage of spent nuclear fuel. The EIS and rule are to be completed within 24 months. Due to low natural gas prices and unfavorable economic conditions,

458

Quarterly Nuclear Deployment Scorecard - October 2013 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 2013 October 2013 Quarterly Nuclear Deployment Scorecard - October 2013 News Updates Dominion has filed an updated integrated resource plan with Virginia and North Carolina State regulators; the plan sets an "earliest possible" in-service date of October 2024 for North Anna 3. Earlier this year, the company announced its intention to return to the General Electric-Hitachi (GEH) ESBWR reactor design with an amended Combined Operating License (COL) to be filed by the end of 2013. Entergy announced that it will close its single unit Vermont Yankee nuclear power plant in late 2014; sustained low natural gas prices, financial impacts of cumulative regulations, and the wholesale market structure all contributed to the company's decision to shutter the plant.

459

Buried waste integrated demonstration FY 94 deployment plan  

SciTech Connect

The Buried Waste Integrated Demonstration (BWID) is a program funded by the U.S. Department of Energy Office of Technology Development. BWID supports the applied research, development, demonstration, testing, and evaluation of a suite of advanced technologies that together form a comprehensive remediation system for the effective and efficient remediation of buried waste. The fiscal year (FY) 1994 effort will fund thirty-eight technologies in five areas of buried waste site remediation: site characterization, waste characterization, retrieval, treatment, and containment/stabilization. This document is the basic operational planning document for deployment of all BWID projects. Discussed in this document are the BWID preparations for INEL field demonstrations, INEL laboratory demonstrations, non-INEL demonstrations, and paper studies. Each technology performing tests will prepare a test plan to detail the specific procedures, objectives, and tasks of each test. Therefore, information specific to testing each technology is intentionally omitted from this document.

Hyde, R.A.; Walker, S.; Garcia, M.M.

1994-05-01T23:59:59.000Z

460

Separations technologies supporting the development of a deployable ATW system  

Science Conference Proceedings (OSTI)

A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The first several years of the program will be directed toward an elucidation of related technical issues and to the establishment, by means of comprehensive trade studies, of an optimum configuration of the elements of the chemical processing infrastructure required for support of the total ATW system. By adopting this sort of disciplined systems engineering approach, it is expected that development and demonstration costs can be minimized and that it will be possible to deploy an ATW system that is an environmentally sound and economically viable venture.

Laidler, J. J.

2000-01-07T23:59:59.000Z