Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Multistage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-drive wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be the best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly conceived AFPM which has a multistage structure and a water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multistage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 215 N{center_dot}m, 1,100 r/min.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering] [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1996-07-01T23:59:59.000Z

2

Development of traction control for front-wheel drive in-wheel motor electric vehicles  

Science Journals Connector (OSTI)

This paper proposes a novel traction control for a front-wheel drive in-wheel motor electric vehicle. The presented vehicle has advantages on high fuel efficiency and cost effectiveness. In order to achieve specific control performance, this study employed a high speed microcontroller as the vehicle's electronic control unit. The anti-skid function based on a reliable traction control kernel is embedded in the system, which can guarantee the steering safety in a slippery and dangerous situation. This study verifies that the traction control based on maximum torque regulation cannot only constrain the slip to improve the longitudinal friction force and lateral friction force, but also provide some information on tyre-road conditions, which can ensure the performance and the effectiveness of two-dimensional motion control. The numerical simulation and demonstration video reveal its effectiveness and feasibility.

Jia-Sheng Hu; Ying-Ruei Huang; Feng-Rung Hu

2012-01-01T23:59:59.000Z

3

Mechanical front wheel drive tractors: a field performance study  

E-Print Network [OSTI]

are recognized for their f1nancial assistance. The John Deere product Eng1neering Center 1n Waterloo furnished technical assistance and the Dallas Branch of John Deere Company provided the mechanical front wheel dr1ve tractor. DICKEY-john Corporat1on supplied...-Cart was used to provide the same programmed load for each tractor. The 2WD tractor was ballasted with 25 percent of the total static tractor weight on the front wheels. Deere I Company recommend NFWO tractors be ballasted with 40 percent of the total static...

Babacz, William Adam

2012-06-07T23:59:59.000Z

4

In-line drivetrain and four wheel drive work machine using same  

DOE Patents [OSTI]

A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

Hoff, Brian (East Peoria, IL)

2008-08-05T23:59:59.000Z

5

Design of a triple singularity drive for mobile wheeled robots  

E-Print Network [OSTI]

This thesis encompasses the development of a mobile robotic platform using three singularity drive modules. The process begins with a review of other omnidirectional platforms, comparing and contrasting their strengths and ...

Carothers, Jeffrey (Jeffrey W.)

2014-01-01T23:59:59.000Z

6

Multi-stage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-driven wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be one best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly-conceived AFPM which has multi-stage structure and water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multi-stage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 220 Nm, 1,100 rpm.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

7

Analysis on cogging torque of driving in-wheel motor for electric vehicle  

Science Journals Connector (OSTI)

In order to reduce the torque fluctuation, vibration and acoustic noise of driving in-wheel motor for electric vehicle, this paper researches the generation mechanism and influence factors of cogging torque. Based on energy method and Fourier expansion, an analytical method is proposed to establish the expression of cogging torque, which can express its relation with design parameters. Based on the expression, the match of pole and slot, pole arc coefficient and permanent magnet eccentric distance are analysed and studied. Ansoft software is used to establish a time-varying movement electromagnetic field finite element model, which can compute the cogging torque about the different match of the pole and slot, different pole arc coefficient and different permanent magnet eccentric distance, in order to obtain the change regularity of the corresponding cogging torque. The conformity of the final simulation computation results with the theoretical analysis indicates this method can be used to provide a theoretical basis to make further optimal design of the new driving in-wheel motor and its control system, so as to reduce torque ripple of in-wheel motor.

Qiping Chen; Hongyu Shu; Limin Chen; Bo Chen; Jianhui Du

2012-01-01T23:59:59.000Z

8

Modelling and simulation of the electronic differential system for an electric vehicle with two-motor-wheel drive  

Science Journals Connector (OSTI)

In-wheel-motor drive electric vehicle (EV) is an innovative configuration, in which each wheel is driven individually by an electric motor. It is possible to use an electronic differential (ED) instead of the heavy mechanical differential because of the fast response time of the motor. A new control approach for ED of a two in-wheel-motor drive EV is proposed based on the fuzzy logic control. The fuzzy logic method employs to estimate the slip rate of each wheel considering the complex and non-linear of the system. Consequently, the ED system distributes torque and power to each motor according to requirements. The effectiveness of the control method is validated in the Matlab/Simulink environment. By simulation results, it is demonstrated that the present ED control system is effective on keeping the slip rate within the optimal range and ensuring the stability of the vehicle either on a straight or curvilinear line.

Yan-e Zhao; Jianwu Zhang

2009-01-01T23:59:59.000Z

9

Argonne Transportation Technology R&D Center - APRF - Four-wheel Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Four-Wheel Drive Chassis Dynamometer Test Cell Argonne has lead responsibility for a project with the U.S. Department of Energy's (DOE's) Vehicle Technologies Program to conduct emission and energy-efficiency tests on hybrid electric vehicles (HEVs), sport utility vehicles, and advanced technology vehicles. These tests require a state-of-the-art electric four-wheel-drive (4WD) chassis dynamometer in a climate-controlled environment with appropriate controls and instrumentation for highly accurate emissions and fuel measurements. This test cell was built as part of the Advanced Powertrain Research Facility. 4WD Chassis Dynamometer Argonne obtained professional engineering/architectural services to assist with the preliminary design and construction documents for a world-class facility capable of benchmarking and developing the most advanced powertrains for future cars and trucks, and to have equipment ready for SULEV (super ultra low emission vehicle) and a full dilution tunnel for measurements of diesel particulate matter. The total test cell design was approximately 75% completed and the building foundation was finished in November 2000. Major equipment, such as the dynamometer, constant volume sampler, and emission bench, was ordered and built. A grand opening ceremony was held November 15, 2002.

10

Electric Wheel Hub Motor  

Science Journals Connector (OSTI)

Wheel hub motors are an innovative drive concept for electric vehicles where the electric machine and, in some cases, the...

Dipl.-Ing. Michael Gröninger; Dipl.-Ing. Felix Horch…

2012-02-01T23:59:59.000Z

11

Implications of Driving Patterns on Well-to-Wheel Performance of Plug-in Hybrid Electric Vehicles  

Science Journals Connector (OSTI)

Implications of Driving Patterns on Well-to-Wheel Performance of Plug-in Hybrid Electric Vehicles ... We do not consider other life cycle stages of the vehicles (e.g., manufacturing and end-of-life) or energy supply infrastructure (e.g., facility construction, maintenance, decommissioning, and labor). ... Gaines, L.; Burnham, A.; Rousseau, A.; Santini, D.Sorting through the many total-energy-cycle pathways possible with early plug-in hybrids. ...

Leon Raykin; Heather L. MacLean; Matthew J. Roorda

2012-05-08T23:59:59.000Z

12

A Novel Approach to the Design of an In-Wheel Semi-Anhysteretic Axial-Flux Switched-Reluctance Motor Drive System for Electric Vehicles .  

E-Print Network [OSTI]

??This thesis presents the development of an in-wheel drive system consisting of an axial-flux switched-reluctance motor and a hub suspension. The motor is designed using… (more)

Lambert, Tim

2013-01-01T23:59:59.000Z

13

Performance evaluation of an active filter non-regenerative AC drive  

E-Print Network [OSTI]

drive system with load is then modeled and the results verified using the Simulink simulation package. It is shown that the proposed topology has several distinct advantages over a traditional diode rectifier such as improved total harmonic distortion...

Skorcz, Alex Joseph

2009-05-15T23:59:59.000Z

14

Performance evaluation of an active filter non-regenerative AC drive  

E-Print Network [OSTI]

drive system with load is then modeled and the results verified using the Simulink simulation package. It is shown that the proposed topology has several distinct advantages over a traditional diode rectifier such as improved total harmonic distortion...

Skorcz, Alex Joseph

2008-10-10T23:59:59.000Z

15

Definition: Water Wheels | Open Energy Information  

Open Energy Info (EERE)

Wheels Wheels Jump to: navigation, search Dictionary.png Water Wheels A water wheel is a large wheel that takes energy in free-flowing or falling water and converts it into a useful form of energy.[1] View on Wikipedia Wikipedia Definition A water wheel is a machine for converting the energy of free-flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a large wooden or metal wheel, with a number of blades or buckets arranged on the outside rim forming the driving surface. Most commonly, the wheel is mounted vertically on a horizontal axle, but the tub or Norse wheel is mounted horizontally on a vertical shaft. Vertical wheels can transmit power either through the axle or via a ring gear and typically drive belts or gears; horizontal wheels usually directly drive their load.

16

The calm before the storm. [Retail wheeling  

SciTech Connect (OSTI)

The right to refuse retail wheeling requests is one of the cornerstones of a utility's monopoly power. Utilities have fought staunchly to preserve it, most recently in preventing retail wheeling from becoming an important issue in the congressional debate over deregulation; the Energy Policy Act of 1992 steered clear of it. For the present, the prohibition of retail wheeling gives utilities enormous power over the retail electric power market. The ability to refuse retail wheeling requests, of course, prevents retail customers from buying power from third parties. This enables a utility to sell retail customers all the power it can generate, at a price that covers its cost plus an allowed return-even if its price exceeds that of power available in the wholesale market. The denial of retail wheeling thus protects a utility's inefficiencies, whose price is ultimately shouldered onto customers through cost-plus electric rates. Allowing retail wheeling would remove the foundation for much of the current monopoly power that utilities enjoy. Third parties could sell power to a utility's retail customers, since the utility would be required to wheel it. Retail customers would be able to bypass the local distribution utility to buy power from the cheapest source available. Market forces would drive pricing rather than the cost-plus ratemaking process. A utility whose electric rates were above market would have to meet the competitive price or lose sales.

Studness, C.M.

1993-05-15T23:59:59.000Z

17

Better Buildings Neighborhood Program: Energy Upgrade California Drives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Upgrade Energy Upgrade California Drives Demand From Behind the Wheel to someone by E-mail Share Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Facebook Tweet about Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Twitter Bookmark Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Google Bookmark Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Delicious Rank Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Digg Find More places to share Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on

18

Electric vehicle regenerative antiskid braking and traction control system  

DOE Patents [OSTI]

An antiskid braking and traction control system for an electric or hybrid vehicle having a regenerative braking system operatively connected to an electric traction motor, and a separate hydraulic braking system includes one or more sensors for monitoring present vehicle parameters and a processor, responsive to the sensors, for calculating vehicle parameters defining the vehicle behavior not directly measurable by the sensors and determining if regenerative antiskid braking control, requiring hydrualic braking control, or requiring traction control are required. The processor then employs a control strategy based on the determined vehicle state and provides command signals to a motor controller to control the operation of the electric traction motor and to a brake controller to control fluid pressure applied at each vehicle wheel to provide the appropriate regenerative antiskid braking control, hydraulic braking control, and traction control.

Cikanek, Susan R. (Wixom, MI)

1995-01-01T23:59:59.000Z

19

Regenerative catalytic oxidation  

SciTech Connect (OSTI)

Currently Regenerative Thermal Oxidizers (R.T.O.`s) are an accepted technology for the control of volatile organic compounds (VOC`s) and hazardous air pollutants (HAP`s). This control technology, when introduced, offered substantial reductions in operating costs, especially auxiliary fuel requirements when compared to existing control technologies such as recuperative thermal and recuperative catalytic oxidizers. While these savings still exist, there is a demand for control of new and/or hybrid technologies, one of which is Regenerative Catalytic Oxidizers (R.C.O.`s). This paper will explore the development of regenerative catalytic oxidation from the theoretical stage through pilot testing through a commercial installation. The operating cost of R.C.O.`s will be compared to R.T.O.`s to verify the savings that are achievable through the use of regenerative catalytic oxidation. In the development of this technology, which is a combination of two (2) existing technologies, R.T.O.`s and catalysis, a second hybrid technology was explored and pilot tested. This is a combination R.C.O. for VOC and HAP control and simultaneous SCR (Selective Catalytic Reduction) for NOx (Oxides of Nitrogen) control. Based on the pilot and full scale testing, both regenerative catalytic oxidizers and systems which combine R.C.O. with SCR for both VOC and NOx reduction are economically viable and are in fact commercially available. 6 figs., 2 tabs.

Gribbon, S.T. [Engelhard Process Emission Systems, South Lyon, MI (United States)

1996-12-31T23:59:59.000Z

20

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2006-01-10T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2003-08-05T23:59:59.000Z

22

ENERGY HARVESTING, RIDE COMFORT, AND ROAD HANDLING OF REGENERATIVE VEHICLE SUSPENSIONS  

E-Print Network [OSTI]

, wheel and chasses masses to the vehicle performances and harvestable power are studied. Experiments power on a typical highway. Kawaoto et al [10] modeled a ball-screw type electromagnetic damper a regenerative suspension with a ball screw and three-phase motor of a real car on vibration test rig

Zuo, Lei

23

A NANOCAR WITH FOUR-WHEEL DRIVE  

Science Journals Connector (OSTI)

Because it’s only a few nanometers long and operates at a chilly 7 K (about –447 °F), this little automobile is unlikely to cause any sleepless nights for electric car makers. ...

BETHANY HALFORD

2011-11-14T23:59:59.000Z

24

Hybrid Braking System for Non-Drive Axles  

Broader source: Energy.gov [DOE]

A hybrid braking system is designed to conserve diesel fuel (or alternative fuels) by using regenerative braking, which extends hybrid technology to non-drive axles.

25

Regenerative feedback resonant circuit  

DOE Patents [OSTI]

A regenerative feedback resonant circuit for measuring a transient response in a loop is disclosed. The circuit includes an amplifier for generating a signal in the loop. The circuit further includes a resonator having a resonant cavity and a material located within the cavity. The signal sent into the resonator produces a resonant frequency. A variation of the resonant frequency due to perturbations in electromagnetic properties of the material is measured.

Jones, A. Mark; Kelly, James F.; McCloy, John S.; McMakin, Douglas L.

2014-09-02T23:59:59.000Z

26

Fuzzy logic electric vehicle regenerative antiskid braking and traction control system  

DOE Patents [OSTI]

An regenerative antiskid braking and traction control system using fuzzy logic for an electric or hybrid vehicle having a regenerative braking system operatively connected to an electric traction motor, and a separate hydraulic braking system includes sensors for monitoring present vehicle parameters and a processor, responsive to the sensors, for calculating vehicle parameters defining the vehicle behavior not directly measurable by the sensor and determining if regenerative antiskid braking control, requiring hydraulic braking control, and requiring traction control are required. The processor then employs fuzzy logic based on the determined vehicle state and provides command signals to a motor controller to control operation of the electric traction motor and to the brake controller to control fluid pressure applied at each vehicle wheel to provide the appropriate regenerative braking control, hydraulic braking control, and traction control.

Cikanek, Susan R. (Wixom, MI)

1994-01-01T23:59:59.000Z

27

Electromagnetic analysis and design of in-wheel motor of micro-electric vehicle based on Maxwell  

Science Journals Connector (OSTI)

To obtain a good drivability and high efficiency of the micro-electric vehicle, a new driving in-wheel motor design was analyzed and optimized. Maxwell software ... element simulation model of the driving in-whee...

Qi-ping Chen ???; Hong-yu Shu ???; Kai Ren ??…

2012-08-01T23:59:59.000Z

28

Design of Efficient In-Wheel Motor for Electric Vehicles  

Science Journals Connector (OSTI)

Abstract This research paper deals with the design and development of an in-wheel motor for electric vehicles. The proposed motor generates a 350-watt power drive with a power source of two 12 V batteries. The batteries are connected in series to increase the voltage to 24 volts and 18.23 A. The in-wheel motor is based on the principle of a DC electric motor to drive the vehicle wheels so that the mechanical components of the transmission and the energy loss are minimized. The proposed in-wheel motor has 46 poles, 51 slots and 51 teeth. In addition, the method lowers the maintenance cost. This research work assumes the maximum weight of 70 kg and the running speed of 20 km/hr. The experiment results show that the output power and efficiency of the in-wheel motor are subject to the variation in input power given that the input voltage remains constant at 25.41 volts. The maximum efficiency of the in-wheel motor of 82.56% is achieved at 2.5 N-m torque. The maximum torque of 6.25 N-m is achieved with the input power of 348.76 watts.

Winai Chanpeng; Prasert Hachanont

2014-01-01T23:59:59.000Z

29

Regenerative nanomedicines: an emerging investment prospective?  

Science Journals Connector (OSTI)

...application of nanotechnologies to the field of regenerative medicine offers the potential...regenerative medicine products rather than nanotechnology as a platform...application of nanotechnology to regenerative medicine may offer enormous...

2010-01-01T23:59:59.000Z

30

Translation and commercialization of regenerative medicines  

Science Journals Connector (OSTI)

...issue 'Translation and commercialization of regenerative medicines...Prescott Translation and commercialization of regenerative medicines...accelerate the banking process and facilitate appropriate...Supplement Translation and commercialization of regenerative medicines...

2010-01-01T23:59:59.000Z

31

Ignition feedback regenerative free electron laser (FEL) amplifier  

DOE Patents [OSTI]

An ignition feedback regenerative amplifier consists of an injector, a linear accelerator with energy recovery, and a high-gain free electron laser amplifier. A fraction of the free electron laser output is coupled to the input to operate the free electron laser in the regenerative mode. A mode filter in this loop prevents run away instability. Another fraction of the output, after suitable frequency up conversion, is used to drive the photocathode. An external laser is provided to start up both the amplifier and the injector, thus igniting the system.

Kim, Kwang-Je (Burr Ridge, IL); Zholents, Alexander (Walnut Creek, CA); Zolotorev, Max (Oakland, CA)

2001-01-01T23:59:59.000Z

32

Project Profile: Regenerative Carbonate-Based Thermochemical...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Regenerative Carbonate-Based Thermochemical Energy Storage System for Concentrating Solar Power Project Profile: Regenerative Carbonate-Based Thermochemical Energy Storage System...

33

Research on the Torque Dynamic Distribution Algorithm of In-Wheel-Motor Electric Vehicle  

Science Journals Connector (OSTI)

This paper focuses on developing the torque dynamic distribution algorithm of In-Wheel-Motor electric vehicle. The algorithm is developed to regulate ... the vehicle body yaw rate by changing the motor drive torq...

Zhengyi He; Yang Ou; Jingming Yuan

2013-01-01T23:59:59.000Z

34

Translation and commercialization of regenerative medicines  

Science Journals Connector (OSTI)

...applying the latest nanotechnologies to enhance the regenerative...impact of regenerative medicine is not just as a new...commercialization of regenerative medicines. References Abdulrazzak...extracellular matrix through nanotechnology. J. R. Soc. Interface...2010 Regenerative medicine: the emergence of...

2010-01-01T23:59:59.000Z

35

Visual estimation of wheel sinkage for rough-terrain mobile robots  

Science Journals Connector (OSTI)

For mobile robots driving across natural terrains, it is critical that the dynamic effects occurring at the wheel-terrain interface be taken into account. One of the most prevalent of these effects is wheel sinkage. Wheels can sink to depths sufficient to prevent further motion, possibly leading to danger of entrapment. This paper presents an algorithm for visual estimation of sinkage. We call it the visual sinkage estimation (VSE) method. It assumes the presence of a monocular camera and an artificial pattern, attached to the wheel side, to determine the terrain contact angle. This paper also introduces an analytical model for wheel sinkage in deformable terrain based on terramechanics. To validate the VSE module, firstly, several tests are performed on a single-wheel test bed, under different operating conditions. Secondly, the effectiveness of the proposed approach is proved in real contexts, employing an all-terrain rover travelling on a sandy beach.

Giulio Reina; Annalisa Milella; Angelo Gentile

2010-01-01T23:59:59.000Z

36

State Transition, Balancing, Station Keeping, and Yaw Control for a Dynamically Stable Single Spherical Wheel Mobile Robot  

E-Print Network [OSTI]

with a four-motor inverse mouse- ball drive, yaw drive, leg drive, control system, and results including present the results and conclusions. II. SYSTEM DESCRIPTION A. Four-Motor Inverse Mouse-Ball Drive Spherical Wheel Mobile Robot Umashankar Nagarajan, Anish Mampetta, George A. Kantor and Ralph L. Hollis

37

Regenerative switching CMOS system  

DOE Patents [OSTI]

Complementary Metal Oxide Semiconductor (CMOS) Schottky barrier Field Effect Transistor systems, which are a series combination of N and P-Channel MOSFETS, in which Source Schottky barrier junctions of the N and P-Channel Schottky barrier MOSFETS are electrically interconnected, (rather than the Drains as in conventional diffused junction CMOS), which Schottky barrier MOSFET system demonstrates Regenerative Inverting Switching Characteristics in use are disclosed. Both the N and P-Channel Schottky barrier MOSFET devices are unique in that they provide operational Drain Current vs. Drain to Source voltage as a function of Gate voltage only where the polarities of the Drain voltage and Gate voltage are opposite, referenced to the Source as a common terminal, and where the polarity of the voltage applied to the Gate is appropriate to cause Channel inversion. Experimentally derived results which demonstrate and verify the operation of N and P-Channel Schottky barrier MOSFETS actually fabricated on P and N-type Silicon respectively, by a common procedure using vacuum deposited Chromium as a Schottky barrier forming metal, are also provided. 14 figs.

Welch, J.D.

1998-06-02T23:59:59.000Z

38

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study  

E-Print Network [OSTI]

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study M. Zeraoulia1 Combustion Engine (ICE) and the electric motor to deliver power in parallel to drive the wheels. Since both the ICE and electric motor are generally coupled to the drive shaft of the wheels via two clutches

Paris-Sud XI, Université de

39

Laser system using regenerative amplifier  

DOE Patents [OSTI]

High energy laser system using a regenerative amplifier, which relaxes all constraints on laser components other than the intrinsic damage level of matter, so as to enable use of available laser system components. This can be accomplished by use of segmented components, spatial filters, at least one amplifier using solid state or gaseous media, and separated reflector members providing a long round trip time through the regenerative cavity, thereby allowing slower switching and adequate time to clear the spatial filters, etc. The laser system simplifies component requirements and reduces component cost while providing high energy output.

Emmett, John L. [Pleasanton, CA

1980-03-04T23:59:59.000Z

40

Regenerative Medicine: Learning from Past Examples  

E-Print Network [OSTI]

Regenerative medicine products have characteristically shown great therapeutic potential, but limited market success. Learning from the past attempts at capturing value is critical for new and emerging regenerative medicine ...

Couto, Daniela S.

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Wheel-type magnetic refrigerator  

DOE Patents [OSTI]

The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load. 7 figs.

Barclay, J.A.

1983-10-11T23:59:59.000Z

42

Rim seal for turbine wheel  

DOE Patents [OSTI]

A turbine wheel assembly includes a disk having a plurality of blades therearound. A ceramic ring is mounted to the housing of the turbine wheel assembly. A labyrinth rim seal mounted on the disk cooperates with the ceramic ring to seal the hot gases acting on the blades from the disk. The ceramic ring permits a tighter clearance between the labyrinth rim seal and the ceramic ring.

Glezer, Boris (Del Mar, CA); Boyd, Gary L. (Alpine, CA); Norton, Paul F. (San Diego, CA)

1996-01-01T23:59:59.000Z

43

Regenerative Boiler Feedwater Heater Economics  

E-Print Network [OSTI]

REGENERATIVE BOILER FEEDWATER HEATER ECONOMICS William L. Viar, PE waterland, Viar & Associates, Inc. Wilmington, Delaware ABSTRACT The basic Rankine Vapor Cycle has been r,~peatedly modified to improve efficiency. Always, the objective....g., first and second laws of thermodynamics) have improved and contributed to the evolution. The demands for larger systems with higher performance have been persistent. Progress i ve changes in the app1icat ion of the fundamental Rankine cycle have...

Viar, W. L.

44

Investigation of the part-load performance of two 1. 12 MW regenerative marine gas turbines  

SciTech Connect (OSTI)

Regenerative and intercooled-regenerative gas turbine engines with low pressure ratio have significant efficiency advantages over traditional aero-derivative engines of higher pressure ratios, and can compete with modern diesel engines for marine propulsion. Their performance is extremely sensitive to thermodynamic-cycle parameter choices and the type of components. The performance of two 1.12 MW (1,500 hp) regenerative gas turbines are predicted with computer simulations. One engine has a single-shaft configuration, and the other has a gas-generator/power-turbine combination. The latter arrangement is essential for wide off-design operating regime. The performance of each engine driving fixed-pitch and controllable-pitch propellers, or an AC electric bus (for electric-motor-driven propellers) is investigated. For commercial applications the controllable-pitch propeller may have efficiency advantages (depending on engine type and shaft arrangements). For military applications the electric drive provides better operational flexibility.

Korakianitis, T.; Beier, K.J. (Washington Univ., St. Louis, MO (United States). Dept. of Mechanical Engineering)

1994-04-01T23:59:59.000Z

45

Qualifying Facility Wheeling Task Force-- Status Report  

E-Print Network [OSTI]

Docket No. 8650 that the PUCT review the applicability of certain parts of the wheeling rules, and in April the Commission appointed a task force composed of representatives from affected industries, utilities, and regulatory staff to review the wheeling...

Panjavan, S.

46

Regenerative Architecture: A Pathway Beyond Sustainability.  

E-Print Network [OSTI]

??The current paradigm in the field of architecture today is one of degeneration and obsolete building technologies. Regenerative architecture is the practice of engaging the… (more)

Littman, Jacob A

2009-01-01T23:59:59.000Z

47

Advanced regenerative absorption refrigeration cycles  

DOE Patents [OSTI]

Multi-effect regenerative absorption cycles which provide a high coefficient of performance (COP) at relatively high input temperatures. An absorber-coupled double-effect regenerative cycle (ADR cycle) (10) is provided having a single-effect absorption cycle (SEA cycle) (11) as a topping subcycle and a single-effect regenerative absorption cycle (1R cycle) (12) as a bottoming subcycle. The SEA cycle (11) includes a boiler (13), a condenser (21), an expansion device (28), an evaporator (31), and an absorber (40), all operatively connected together. The 1R cycle (12) includes a multistage boiler (48), a multi-stage resorber (51), a multisection regenerator (49) and also uses the condenser (21), expansion device (28) and evaporator (31) of the SEA topping subcycle (11), all operatively connected together. External heat is applied to the SEA boiler (13) for operation up to about 500 degrees F., with most of the high pressure vapor going to the condenser (21) and evaporator (31) being generated by the regenerator (49). The substantially adiabatic and isothermal functioning of the SER subcycle (12) provides a high COP. For higher input temperatures of up to 700 degrees F., another SEA cycle (111) is used as a topping subcycle, with the absorber (140) of the topping subcycle being heat coupled to the boiler (13) of an ADR cycle (10). The 1R cycle (12) itself is an improvement in that all resorber stages (50b-f) have a portion of their output pumped to boiling conduits (71a-f) through the regenerator (49), which conduits are connected to and at the same pressure as the highest pressure stage (48a) of the 1R multistage boiler (48).

Dao, Kim (14 Nace Ave., Piedmont, CA 94611)

1990-01-01T23:59:59.000Z

48

Regenerative Fuel Cells for Energy Storage | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Regenerative Fuel Cells for Energy Storage Regenerative Fuel Cells for Energy Storage Presentation by Corky Mittelsteadt, Giner Electrochemical Systems, at the NREL Reversible Fuel...

49

Energy Upgrade California Drives Demand From Behind the Wheel  

Broader source: Energy.gov [DOE]

With a goal of "energy efficiency or bust," the California Center for Sustainable Energy (CCSE) recently completed a statewide tour of its ongoing Energy Upgrade California Roadshow. The mobile...

50

Energy Upgrade California Drives Demand From Behind the Wheel...  

Energy Savers [EERE]

to set up and break down the exhibit. CCSE's fuel costs have been minimal due to its propane-powered truck and commercial fuel rates. For program administrators considering...

51

Aerodynamic Drag Reduction Apparatus For Wheeled Vehicles In Ground Effect  

DOE Patents [OSTI]

An apparatus for reducing the aerodynamic drag of a wheeled vehicle in a flowstream, the vehicle having a vehicle body and a wheel assembly supporting the vehicle body. The apparatus includes a baffle assembly adapted to be positioned upstream of the wheel assembly for deflecting airflow away from the wheel assembly so as to reduce the incident pressure on the wheel assembly.

Ortega, Jason M. (Pacifica, CA); Salari, Kambiz (Livermore, CA)

2005-12-13T23:59:59.000Z

52

Regenerative medicine: the emergence of an industry  

Science Journals Connector (OSTI)

...orthopaedic area followed by neural repair, the cardiovascular area, inflammatory...products in the regenerative medicine pipeline. This is in addition to 28 products...ECMs as scaffolds for musculoskeletal repair. Clin. Ortho. Relat. Res. 3675...

2010-01-01T23:59:59.000Z

53

Regenerative fuel cell engineering - FY99  

SciTech Connect (OSTI)

The authors report the work conducted by the ESA-EPE Fuel Cell Engineering Team at Los Alamos National Laboratory during FY99 on regenerative fuel cell system engineering. The work was focused on the evaluation of regenerative fuel cell system components obtained through the RAFCO program. These components included a 5 kW PEM electrolyzer, a two-cell regenerative fuel cell stack, and samples of the electrolyzer membrane, anode, and cathode. The samples of the electrolyzer membrane, anode, and cathode were analyzed to determine their structure and operating characteristics. Tests were conducted on the two-cell regenerative fuel cell stack to characterize its operation as an electrolyzer and as a fuel cell. The 5 kW PEM electrolyzer was tested in the Regenerative Fuel Cell System Test Facility. These tests served to characterize the operation of the electrolyzer and, also, to verify the operation of the newly completed test facility. Future directions for this work in regenerative fuel cell systems are discussed.

Michael A. Inbody; Rodney L. Borup; James C. Hedstrom; Jose Tafoya; Byron Morton; Lois Zook; Nicholas E. Vanderborgh

2000-01-01T23:59:59.000Z

54

Regenerative rotary displacer Stirling engine  

SciTech Connect (OSTI)

A few rotary displacer Stirling engines in which the displacer has one gas pocket space at one side and rotates in a main enclosed cylinder, which is heated from one side and cooled from opposite side without any regenerator, have been studied for some time by the authors. The authors tried to improve this engine by equipping it with a regenerator, because without a regenerator, pressure oscillation and efficiency are too small. Here, several types of regenerative rotary displacer piston Stirling engines are proposed. One is the contra-rotating tandem two disc type displacer engine using axial heat conduction through side walls or by heat pipes and another is a single disc type with circulating fluid regenerator or heat pipes. Stirling engines of this new rotary displacer type are thought to attain high speed. Here, experimental results of the original rotary displacer Stirling engine without a regenerator, and one contra-rotating tandem displacer engine with side wall regenerator by axial heat conduction are reported accompanied with a discussion of the results.

Isshiki, Naotsugu; Watanabe, Hiroichi [Nihon Univ. Tokyo (Japan); Raggi, L. [Waseda Univ., Tokyo (Japan); Isshiki, Seita; Hirata, Koichi

1996-12-31T23:59:59.000Z

55

Obstacle Avoidance for Trajectory Tracking Control of Wheeled Mobile Robots  

Science Journals Connector (OSTI)

The wheeled mobile robots used in the flexible manufacturing systems act ... proposes a new control method for the wheeled mobile robots movement in the presence of static and...

R?zvan ?olea; Daniela Cristina Cernega

2013-01-01T23:59:59.000Z

56

The Wheels on the Bus Go Round and Round... | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... March 9, 2010 - 5:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program I have a love/hate relationship with buses. I love that they save me gasoline, are more efficient than driving a car, and reduce my greenhouse gas emissions. However, I hate them when they're running late! But there is one category of buses that I'm particularly fond of - those that run on alternative fuels. In fact, alternative fuel and advanced technology transit buses offer a number of health, environmental, and social benefits. As anyone who has walked behind a traditional diesel bus knows, the plume of black smoke from its tailpipe is both unpleasant and unhealthy. That

57

The Wheels on the Bus Go Round and Round... | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... March 9, 2010 - 5:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program I have a love/hate relationship with buses. I love that they save me gasoline, are more efficient than driving a car, and reduce my greenhouse gas emissions. However, I hate them when they're running late! But there is one category of buses that I'm particularly fond of - those that run on alternative fuels. In fact, alternative fuel and advanced technology transit buses offer a number of health, environmental, and social benefits. As anyone who has walked behind a traditional diesel bus knows, the plume of black smoke from its tailpipe is both unpleasant and unhealthy. That

58

Therapeutic potential of nanoceria in regenerative medicine.  

SciTech Connect (OSTI)

Tissue engineering and regenerative medicine aim to achieve functional restoration of tissue or cells damaged through disease, aging or trauma. Advancement of tissue engineering requires innovation in the field of 3D scaffolding, and functionalization with bioactive molecules. Nanotechnology offers advanced materials with patterned nano-morphologies for cell growth and different molecular substrates which can support cell survival and functions. Cerium oxide nanoparticles (nanoceria) can control intracellular as well as extracellular reactive oxygen and nitrogen species. Recent findings suggest that nanoceria can enhance long-term cell survival, enable cell migration and proliferation, and promote stem cell differentiation. Moreover, the self-regenerative property of nanoceria permits a small dose to remain catalytically active for extended time. This review summarizes the possibilities and applications of nanoceria in the field of tissue engineering and regenerative medicine.

Das, Soumen; Chigurupati, Srinivasulu; Dowding, Janet; Munusamy, Prabhakaran; Baer, Donald R.; McGinnis, James F.; Mattson, Mark P.; Self, William; Seal, Sudipta

2014-11-14T23:59:59.000Z

59

Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive  

E-Print Network [OSTI]

drive train is modeled and compared to a series hybrid drive train in operation on the EPA Urban is leveraging the intrinsically high power density of the hydraulic energy storage system through optimal enginePaper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel

Li, Perry Y.

60

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular  

E-Print Network [OSTI]

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular momentum, which is a property of a bicycle wheel's mass is concentrated along the wheel's rim, rather than at the center, and this causes. The bicycle wheel, you, and the chair comprise a system that obeys the principle of conservation of angular

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Regenerative medicine. Opportunities and challenges: a brief overview  

Science Journals Connector (OSTI)

...components of regenerative medicine is intense worldwide...man-made materials using nanotechnology to improve their surface...opportunities for regenerative medicines are immense especially...researched; the advent of nanotechnology has allowed the development...commercialization of regenerative medicines. References Appelbaum...

2010-01-01T23:59:59.000Z

62

An improved theory for regenerative pump performance  

E-Print Network [OSTI]

, impeller angles, CFD 1 INTRODUCTION Regenerative flow pumps and compressors have found many applications of publications existing in the literature is comparatively less than papers dealing with centrifugal and axial flow pump/compressor (RFP and RFC) is applied as a gas compressor there is a further advantage

Kim, Yong Jung

63

Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

Shayak Bhattacharjee

2015-01-17T23:59:59.000Z

64

Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

Shayak Bhattacharjee

2014-10-12T23:59:59.000Z

65

Innovative technical advances in the application of regenerative thermal oxidizers  

SciTech Connect (OSTI)

Regenerative Thermal Oxidizers (RTOs) have been applied in industry for over twenty (20) years to reduce the emissions of Volatile Organic compounds (VOCs) into the atmosphere from industrial process emissions. The Clean Air Act and its amendments have established a regulatory framework setting standards for allowable levels of VOC emissions. Several forces are driving the increasing use and acceptance of this technology: (1) High efficiency and increasing stringent standards require higher destruction efficiency; (2) Low operating cost and control of emission streams with less VOCs (therefore, less fuel value) causing higher use of natural gas for combustion; (3) Low NO{sub x}--the overlapping concern of NO{sub x} generation from the combustion process; (4) Low process upsets with improved productivity of industrial process require continuous integration of VOC abatement equipment; and (5) Reduced capital cost--capital cost criteria is $/ton of VOC abated. The latest development in RTO technology is the Single Can Oxidizer (SCO). This regenerative thermal oxidizer is the accumulation of developments in many subsystems of RTOs, combined with a dramatic new configuration. Several features of the system offer unique benefits to industrial end users: (1) Single can configuration gives reduced weight, material usage, and cost; (2) Rotary valve design gives smooth operation, and low pressure fluctuations; (3) Structured block heat recovery media reduces pressure drop, and lowers HP/operating cost; and (4) SMART system lowers NO{sub x} output/reduced operation cost. This paper will present a discussion of the features listed above. In addition, it will provide analytical documentation of test results for a full scale commercial unit.

Grzanka, R.; Truppi, T.

1999-07-01T23:59:59.000Z

66

Maass Regenerative Energien GmbH founders | Open Energy Information  

Open Energy Info (EERE)

Maass Regenerative Energien GmbH founders Maass Regenerative Energien GmbH founders Jump to: navigation, search Name Maass Regenerative Energien GmbH founders Place Wesel, Germany Sector Solar Product Founders of the Wesel-based solar project company. References Maass Regenerative Energien GmbH founders[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Maass Regenerative Energien GmbH founders is a company located in Wesel, Germany . References ↑ "[ Maass Regenerative Energien GmbH founders]" Retrieved from "http://en.openei.org/w/index.php?title=Maass_Regenerative_Energien_GmbH_founders&oldid=348555" Categories: Clean Energy Organizations Companies Organizations Stubs What links here

67

Investigation of a regenerative damping concept  

E-Print Network [OSTI]

including stationary equipment, turbine engines, and automotive systems. Perhaps one of the most common uses for the damper is in the automobile suspension, where the damper controls passenger comfort and vehicle handling. The power dissipated... by automotive shock absorbers has been studied previously, and these studies begin to provide motivation for the investigation of regenerative damping. The power dissipated in an automotive shock absorber has been studied through both computer simulation...

Fodor, Michael Glenn

2012-06-07T23:59:59.000Z

68

Low-temperature thermally regenerative electrochemical system  

DOE Patents [OSTI]

A thermally regenerative electrochemical system is described including an electrochemical cell with two water-based electrolytes separated by an ion exchange membrane, at least one of the electrolytes containing a complexing agent and a salt of a multivalent metal whose respective order of potentials for a pair of its redox couples is reversible by a change in the amount of the ocmplexing agent in the electrolyte, the complexing agent being removable by distillation to cause the reversal.

Loutfy, R.O.; Brown, A.P.; Yao, N.P.

1982-04-21T23:59:59.000Z

69

Low temperature thermally regenerative electrochemical system  

DOE Patents [OSTI]

A thermally regenerative electrochemical system including an electrochemical cell with two water-based electrolytes separated by an ion exchange membrane, at least one of the electrolytes containing a complexing agent and a salt of a multivalent metal whose respective order of potentials for a pair of its redox couples is reversible by a change in the amount of the complexing agent in the electrolyte, the complexing agent being removable by distillation to cause the reversal.

Loutfy, Raouf O. (Tucson, AZ); Brown, Alan P. (Bolingbrook, IL); Yao, Neng-Ping (Clarendon Hills, IL)

1983-01-01T23:59:59.000Z

70

Wheeling Power Co | Open Energy Information  

Open Energy Info (EERE)

Wheeling Power Co Wheeling Power Co Place Ohio Service Territory West Virginia Website www.aepohio.com Green Button Reference Page www.aep.com/newsroom/news Green Button Committed Yes Utility Id 20521 Utility Location Yes Ownership I NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Transmission Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] Energy Information Administration Form 826[2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates No Rates Available The following table contains monthly sales and revenue data for Wheeling

71

Clean Cities: Waste-to-Wheels: Building for Success Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events Events Printable Version Share this resource Send a link to Clean Cities: Waste-to-Wheels: Building for Success Workshop to someone by E-mail Share Clean Cities: Waste-to-Wheels: Building for Success Workshop on Facebook Tweet about Clean Cities: Waste-to-Wheels: Building for Success Workshop on Twitter Bookmark Clean Cities: Waste-to-Wheels: Building for Success Workshop on Google Bookmark Clean Cities: Waste-to-Wheels: Building for Success Workshop on Delicious Rank Clean Cities: Waste-to-Wheels: Building for Success Workshop on Digg Find More places to share Clean Cities: Waste-to-Wheels: Building for Success Workshop on AddThis.com... Conferences & Workshops Clean Cities 20th Anniversary Electric Vehicle Community Readiness Stakeholder Summit Waste-to-Wheels

72

Powering MEMS portable devices—a review of non-regenerative and regenerative  

Science Journals Connector (OSTI)

Power consumption is forecast by the International Technology Roadmap of Semiconductors (ITRS) to pose long-term technical challenges for the semiconductor industry. The purpose of this paper is threefold: (1) to provide an overview of strategies for powering MEMS via non-regenerative and regenerative power supplies; (2) to review the fundamentals of piezoelectric energy harvesting, along with recent advancements, and (3) to discuss future trends and applications for piezoelectric energy harvesting technology. The paper concludes with a discussion of research needs that are critical for the enhancement of piezoelectric energy harvesting devices.

K A Cook-Chennault; N Thambi; A M Sastry

2008-01-01T23:59:59.000Z

73

HybriDrive Propulsion System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HybriDrive HybriDrive ® Propulsion System Cleaner, smarter power for transit DOE/FTA Fuel Cell Research Priorities Workshop Washington, DC 7 June 2010 Bart W. Mancini Sr. Principal Systems Engineer BAE Systems Ph: 607-770-4103 bart.mancini@baesystems.com 2 Overview 3 * BAE Systems FC Experience / Deployments * Technology gaps/barriers to full commercialization of fuel cell buses * Well-to-wheels energy efficiency and emissions * Cost metrics * Bus integration issues * Fuel cell bus R&D needs * Future plans BAE Systems FC Experience / Deployments 4 * 1998 - Georgetown/FTA/DOE Fuel Cell Bus #1 (still serviceable) * UTC 100 kW Phosphoric Acid FC using on-board Methanol Reformate, Hybrid propulsion & Electric accessories * 2000 - Georgetown/FTA/DOE Fuel Cell Bus #2 (retired) *

74

The Effect of Grinding on Grinding Wheel Condition  

E-Print Network [OSTI]

The Effect of Grinding on Grinding Wheel Condition Prasann B. Handigund, Melissa Hasenbank Michele Process Abrasive wear Abrasive pull-out Wheel diameter shrinks Chip accumulation Surface finish Dimensional accuracy Grinding force Temperature #12;Wheel Wear and Self-Dressing Wear Modes: -Attritious wear

Endres. William J.

75

2013-2014 Handbook Stem Cell Biology and Regenerative  

E-Print Network [OSTI]

2013-2014 Handbook Stem Cell Biology and Regenerative Medicine Interdisciplinary Graduate Program and yet focus specifically on fundamentals of biology and medicine necessary for a successful career

Puglisi, Joseph

76

Development of non-premixed porous inserted regenerative thermal oxidizer  

Science Journals Connector (OSTI)

In this study, a porous inserted regenerative thermal oxidizer (PRTO) system was developed for a... x emissions and high radiant efficiency. Zirconium dioxide (ZrO2...) ceramic ...

Jun-chun Zhang; Le-ming Cheng; Cheng-hang Zheng…

2013-09-01T23:59:59.000Z

77

Regenerative nanotechnology in oral and maxillofacial surgery  

Science Journals Connector (OSTI)

Abstract Regenerative nanotechnology is at the forefront of medical research, and translational medicine is a challenge to both scientists and clinicians. Although there has been an exponential rise in the volume of research generated about it for both medical and surgical uses, key questions remain about its actual benefits. Nevertheless, some people think that therapeutics based on its principles may form the core of applied research for the future. Here we give an account of its current use in oral and maxillofacial surgery, and implications and challenges for the future.

Kaveh Shakib; Aaron Tan; Vukic Soskic; Alexander M. Seifalian

2014-01-01T23:59:59.000Z

78

Current concepts: tissue engineering and regenerative medicine applications in the ankle joint  

Science Journals Connector (OSTI)

...hand, regenerative medicine (RM) is a broader...strategies [18], nanotechnologies and several medical...engineering and regenerative medicine strategies to skin...technologies such as nanotechnology [17,20,33...engineering and regenerative medicine strategies to tendon...

2014-01-01T23:59:59.000Z

79

Multiple excitation regenerative amplifier inertial confinement system  

DOE Patents [OSTI]

The invention relates to apparatus and methods for producing high intensity laser radiation generation which is achieved through an optical amplifier-storage ring design. One or two synchronized, counterpropagating laser pulses are injected into a regenerative amplifier cavity and amplified by gain media which are pumped repetitively by electrical or optical means. The gain media excitation pulses are tailored to efficiently amplify the laser pulses during each transit. After the laser pulses have been amplified to the desired intensity level, they are either switched out of the cavity by some switch means, as for example an electro-optical device, for any well known laser end uses, or a target means may be injected into the regenerative amplifier cavity in such a way as to intercept simultaneously the counterpropagating laser pulses. One such well known end uses to which this invention is intended is for production of high density and temperature plasmas suitable for generating neutrons, ions and x-rays and for studying matter heated by high intensity laser radiation. 11 figs.

George, V.E.; Haas, R.A.; Krupke, W.F.; Schlitt, L.G.

1980-05-27T23:59:59.000Z

80

Multiple excitation regenerative amplifier inertial confinement system  

DOE Patents [OSTI]

The invention relates to apparatus and methods for producing high intensity laser radiation generation which is achieved through an optical amplifier-storage ring design. One or two synchronized, counterpropagating laser pulses are injected into a regenerative amplifier cavity and amplified by gain media which are pumped repetitively by electrical or optical means. The gain media excitation pulses are tailored to efficiently amplify the laser pulses during each transit. After the laser pulses have been amplified to the desired intensity level, they are either switched out of the cavity by some switch means, as for example an electro-optical device, for any well known laser end uses, or a target means may be injected into the regenerative amplifier cavity in such a way as to intercept simultaneously the counterpropagating laser pulses. One such well known end uses to which this invention is intended is for production of high density and temperature plasmas suitable for generating neutrons, ions and x-rays and for studying matter heated by high intensity laser radiation.

George, Victor E. [Livermore, CA; Haas, Roger A. [Pleasanton, CA; Krupke, William F. [Pleasanton, CA; Schlitt, Leland G. [Livermore, CA

1980-05-27T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Wheeling, Illinois: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wheeling, Illinois: Energy Resources Wheeling, Illinois: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1391927°, -87.9289591° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1391927,"lon":-87.9289591,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

82

A magneto-electric quantum wheel  

E-Print Network [OSTI]

Here we show that self-propulsion in quantum vacuum may be achieved by rotating or aggregating magneto-electric nano-particles. The back-action follows from changes in momentum of electro-magnetic zero-point fluctuations, generated in magneto-electric materials. This effect may provide new tools for investigation of the quantum nature of our world. It might also serve in the future as a "quantum wheel" to correct satellite orientation in space.

Alexander Feigel

2009-12-05T23:59:59.000Z

83

Harsh medicine. [retail wheeling experiment in Michigan and side effects  

SciTech Connect (OSTI)

Retailing wheeling's harmful side-effects may surface in a Michigan experiment. In the final analysis, the debate over retail wheeling is about whether there will be direct price competition in the electric power industry. Retail wheeling would extend to the electric power market the same freedom of choice among customers that is present elsewhere in the economy. It would provide a mechanism through which competition could enforce an efficient allocation of resources. It also undoubtedly would eliminate most of the huge discrepancies that exist between so many neighboring service areas. It is unlikely that permitting retail wheeling would actually result in much wheeling or loss of load. Utilities will no doubt meet the threat of the loss of load by cutting rates to hold their customers. Hence, the primary effect would be on the pricing of electricity, not the wheeling of power. The retail wheeling experiment under consideration in Michigan can become an important step toward making the utility industry more efficient for the nation and more equitable for ratepayers. Unfortunately, it also is potentially unfair to the utilities involved. A retail wheeling experiment in one state is likely to put those utilities at risk for competitive attack, but is unlikely to give those utilities the countervailing power to use retail wheeling elsewhere to market their power. Fairness and economic efficiency require that retail wheeling exist everywhere, and that is is accessible to utilities as well as non-utilities.

Studness, C.M.

1993-07-15T23:59:59.000Z

84

Motor control and torque coordination of an electric vehicle actuated by two in-wheel motors  

Science Journals Connector (OSTI)

In this research, an electric vehicle actuated by two in-wheel DC motors is developed. By properly coordinating the motor torques, both drive-by-wire and electrical steering can be achieved. Two critical issues respectively related to the design of motor controllers and the coordination of the two motor torques under control saturation are investigated in this study. Firstly, as for the in-wheel motors that are used for driving and steering simultaneously, their operation covers a wider dynamic range that forward acceleration (deceleration), and reverse acceleration (deceleration) may occur alternately. To perform driving and steering smoothly and efficiently, each motor should be switched to an appropriate mode to generate the torque demanded. Secondly, during the high-speed maneuvering, the high back-emf voltage in the motor coil substantially reduces the motor’s torque generating capability. Since the electrical steering depends on the differential torque of two wheels, when electrical steering is demanded in this case, torque/current saturation may occur in either one of the motors and the electrical steering performance could be seriously degraded. To address these issues, controllers of two levels are proposed. For the low-level controller (the motor controller), it operates the motor automatically in an appropriate mode for performance and efficiency consideration. An input transformation is introduced to cancel the nonlinearity in current dynamics so as to control the motor torque easily and precisely regardless of mode switching. For the high-level controller (the torque coordination controller), besides generating reference commands to the low-level controllers, during control saturation it can also properly re-distributes control signals to maintain consistent steering performance and provides compensation for integrator windup. The control system is implemented and the performance is experimentally and numerically validated.

Feng-Kuang Wu; T.-J. Yeh; Chun-Feng Huang

2013-01-01T23:59:59.000Z

85

New Regenerative Cycle for Vapor Compression Refrigeration  

Office of Scientific and Technical Information (OSTI)

SCIENTIFIC REPORT SCIENTIFIC REPORT Title Page Project Title: New Regenerative Cycle for Vapor Compression Refrigeration DOE Award Number: DE-FG36-04GO14327 Document Title: Final Scientific Report Period Covered by Report: September 30, 2004 to September 30, 2005 Name and Address of Recipient Organization: Magnetic Development, Inc., 68 Winterhill Road, Madison, CT 06443, phone: 203-214-7247, fax: 203-421-7948, e-mail: mjb1000@aol.com Contact Information: Mark J. Bergander, Ph.D., P.E., Principal Investigator, phone: 203-214-7247, fax: 203-421-7948, e-mail: mjb1000@aol.com Project Objective (as stated in the proposal): The main objective of this project is to confirm on a well-instrumented prototype the theoretically derived claims of higher efficiency and coefficient

86

Adaptive controller for regenerative and friction braking system  

DOE Patents [OSTI]

A regenerative and friction braking system for a vehicle having one or more roadwheels driven by an electric traction motor includes a driver responsive device for producing a brake demand signal having a magnitude corresponding to the level of braking force selected by the driver and friction and regenerative brakes operatively connected with the roadwheels of the vehicle. A system according to this invention further includes control means for operating the friction and regenerative braking subsystems so that maximum brake torques sustainable by the roadwheels of the vehicle without skidding or slipping will not be exceeded.

Davis, Roy I. (Ypsilanti, MI)

1990-01-01T23:59:59.000Z

87

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

the ping-pong ball and the wheel respectively. Location of mc are the radius of the wheel and the ball. m, m b , and msure the ball is caught between the wheels and the body. See

Chen, Po-Ting

2010-01-01T23:59:59.000Z

88

Numerical Analysis of the Channel Wheel Fresh Air Ventilator Under Frosting Conditions  

E-Print Network [OSTI]

channel wheel heat exchanger under different ambient conditions using the model developed. These include frost formation on the surface of the channel wheel heat exchanger, and impacts on the operational performance of the channel wheel fresh air...

Gao, B.; Dong, Z.; Cheng, Z.; Luo, E.

2006-01-01T23:59:59.000Z

89

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN  

E-Print Network [OSTI]

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN Helen Meng, Senis WHEELS is a conversational system which provides access to a database of eletronic automobile classified users to search through a database of 5,000 automobile classifieds. The current end-to-end system can re

90

The design process for wheel-robot integration  

E-Print Network [OSTI]

In this thesis, the design process for wheel-robot integration was documented and reflected on. The project focused on redesigned certain aspects a half-scale wheel-robot to be integrated with a half-scale CityCar prototype ...

Carvajal, Michael Angelo

2009-01-01T23:59:59.000Z

91

NREL: Fleet Test and Evaluation - Hydraulic Hybrid Drive Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydraulic Hybrid Drive Systems Hydraulic Hybrid Drive Systems NREL's Fleet Test and Evaluation Team conducts performance evaluations of hydraulic hybrid drive systems in delivery vehicles. Because hydraulic hybrids feature highly efficient regenerative braking systems and "engine off at idle" capabilities, they are ideal for parcel delivery applications where stop-and-go traffic is common. Hydraulic hybrid systems can capture up to 70% of the kinetic energy that would otherwise be lost during braking. This energy drives a pump, which transfers hydraulic fluid from a low-pressure reservoir to a high-pressure accumulator. When the vehicle accelerates, fluid in the high-pressure accumulator moves to the lower-pressure reservoir, which drives a motor and provides extra torque. This process can improve the vehicle's fuel economy

92

Driving gear rack cleaner for a mining machine  

SciTech Connect (OSTI)

A driving gear for a mining machine is described that is comprised of a coil chain wound over a driving wheel and a jockey wheel and co-operating with a rack mounted along a conveyor. A sweep-off gear is pivotably mounted in front of a slide of the machine at a level above the rack. The sweep-off gear has a sweep-off surface which is inclined both with respect to the longitudinal axis of the rack and the horizontal surface of the rack teeth for sweepingoff bodies from the rack onto the conveyor. Nozzles are provided on the gear for washing the rack with a water stream under pressure at an angle with respect to the surface of the rack.

Blazewicz, A.; Krutki, M.; Mandat, K.; Sedlaczek, J.; Wozniak, T.

1980-12-23T23:59:59.000Z

93

Argonne's GREET Model - Driving Transportation Solutions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving Driving Transportation Solutions Model Argonne's GREET D r i v i n g Tr a n s p o r t a t i o n S o l u t i o n s ARGONNE'S GREET Argonne's GREET model is widely recognized as the "gold standard" for evaluating and comparing the energy and environmental impacts of transportation fuels and advanced vehicles. The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model is a one-of-a-kind analytical tool that simulates the energy use and emissions output of various vehicle and fuel combinations. Sponsored by the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy, the free software program gives researchers the unique ability to analyze technologies over an entire life cycle - from well to wheels and from raw material mining to vehicle disposal.

94

Regulators run the gamut on retail wheeling-Fitch  

SciTech Connect (OSTI)

Retail wheeling is less imminent than previously thought, according to a Fitch Investors Service survey of state regulators who appear to be more skeptical than optimistic about the prospects for direct customer access. The survey also shoes that those regulators who are interested in retail wheeling hope to experiment with it without federal intervention. Of the 36 states whose commissioners responded to the Fich survey, 28 percent expressed an overall positive outlook for retail wheeling within their states, while 42 percent were negative. The remaining 30 percent were neutral.

O`Driscoll, M.

1994-10-31T23:59:59.000Z

95

Regenerative Energie Systeme RegEnSys | Open Energy Information  

Open Energy Info (EERE)

Regenerative Energie Systeme RegEnSys Regenerative Energie Systeme RegEnSys Jump to: navigation, search Name Regenerative Energie Systeme (RegEnSys) Place Frankenthal, Rhineland-Palatinate, Germany Zip 67227 Sector Solar Product Sale and installation of solar (thermal and PV) and ventilation systems. Coordinates 51.131202°, 14.106809° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.131202,"lon":14.106809,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

96

Lightweight pressure vessels and unitized regenerative fuel cells  

SciTech Connect (OSTI)

Energy storage systems have been designed using lightweight pressure vessels with unitized regenerative fuel cells (URFCs). The vessels provide a means of storing reactant gases required for URFCs; they use lightweight bladder liners that act as inflatable mandrels for composite overwrap and provide a permeation barrier. URFC systems have been designed for zero emission vehicles (ZEVs); they are cost competitive with primary FC powered vehicles that operate on H/air with capacitors or batteries for power peaking and regenerative braking. URFCs are capable of regenerative braking via electrolysis and power peaking using low volume/low pressure accumulated oxygen for supercharging the power stack. URFC ZEVs can be safely and rapidly (<5 min.) refueled using home electrolysis units. Reversible operation of cell membrane catalyst is feasible without significant degradation. Such systems would have a rechargeable specific energy > 400 Wh/kg.

Mitlitsky, F.; Myers, B.; Weisberg, A.H.

1996-09-06T23:59:59.000Z

97

Mathematical simulation of wind-wheel aerodynamic performances  

Science Journals Connector (OSTI)

A mathematical model of wind-wheel aerodynamic performances for a wind-power plant is developed. This model makes it possible to both calculate wind turbine performance and recover it for any blade pitch angles.

P. S. Tsgoev

2009-11-01T23:59:59.000Z

98

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS  

E-Print Network [OSTI]

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS AND ENERGY CONSUMPTION Prepared For: California to Tank, Criteria Pollutants, Multi-media impacts, EMFAC #12;#12;vii Table of Contents Acknowledgements

99

The design, construction, and control of a wheeled robot vehicle  

E-Print Network [OSTI]

THE DESIGN, CONSTRUCTION, AND CONTROL OF A WHEELED ROBOT VEHICLE A Thesis by TEVO EKIRI WANG Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December... 1986 Major Subject: Mechanical Engineering THE DESIGN, CONSTRUCTION, AND CONTROL OF A WHEELED ROBOT VEHICLE A Thesis by TEVO EKIRIWANG Approved as to style and content by: Dennis N. ingham (Chairman of Committ ) Louis J. Everett c . C...

Ekiriwang, Tevo

2012-06-07T23:59:59.000Z

100

Conversion of a regenerative oxidizer into catalytic unit  

SciTech Connect (OSTI)

Use of a VOC oxidation catalyst in the existing regenerative thermal oxidizers may greatly reduce fuel consumption and improve the oxidizer performance. This was demonstrated in a commercial 25,000 SCFM unit installed at a printing facility. The paper discusses the principles of the oxidizer retrofit design and test results obtained at various conditions of operation.

Matros, Y.S.; Bunimovich, G.A.; Strots, V.O. [Matros Technologies, Chesterfield, MO (United States)] [and others

1997-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Regenerative oscillation and four-wave mixing in graphene optoelectronics  

E-Print Network [OSTI]

Regenerative oscillation and four-wave mixing in graphene optoelectronics T. Gu1 *, N. Petrone2 , J consecutive first observations in graphene­ silicon hybrid optoelectronic devices--ultralow-power resonant optoelectronics and all-optical signal processing. S ubwavelength nanostructures in monolithic material platforms

Hone, James

102

Alkaline regenerative fuel cell systems for energy storage  

SciTech Connect (OSTI)

This paper presents the results of a preliminary design study of a Regenerative Fuel Cell Energy Storage system for application to future low-earth orbit space missions. This high energy density storage system is based on state-of-the-art alkaline electrolyte cell technology and incorporates dedicated fuel cell and electrolysis cell modules. 11 refs.

Schubert, F.H.; Reid, M.A.; Martin, R.E.

1981-01-01T23:59:59.000Z

103

Engineering AnteaterDrive  

E-Print Network [OSTI]

Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

Mease, Kenneth D.

104

RHONEY, BRIAN KEITH. Cylindrical Wire Electrical Discharge Truing of Metal Bond Diamond Grinding Wheels. (Under the direction of Albert Shih)  

E-Print Network [OSTI]

Electrical Discharge Machining (EDM) to profile a metal bond diamond grinding wheel, and then study the wear to rotate the wheel inside a traditional wire EDM machine. Once the process proved feasible, grinding and grinding performance of the EDM trued wheel. Diamond wheels are known to exhibit low wheel wear

Shih, Albert J.

105

The great ``retail wheeling`` illusion, and more productive energy futures  

SciTech Connect (OSTI)

This paper sets out the reasons why many environmental and public interest organizations oppose retail wheeling. Cavanagh argues that retail wheeling would destroy incentives for energy efficiency improvements and renewable energy generation--benefits that reduce long-term energy service costs to society as a whole. The current debate over the competitive restructuring of the electric power industry is critical from both economic and environmental perspectives. All attempts to introduce broad-scale retail wheeling in the United States have failed; instead, state regulators are choosing a path that emphasizes competition and choice, but acknowledges fundamental differences between wholesale and retail markets. Given the physical laws governing the movement of power over centrally controlled grids, the choice offered to customers through retail wheeling of electricity is a fiction -- a re-allocation of costs is all that is really possible. Everyone wants to be able to claim the cheapest electricity on the system; unfortunately, there is not enough to go around. By endorsing the fiction of retail wheeling for certain types of customers, regulators would be recasting the retail electricity business as a kind of commodity exchange. That would reward suppliers who could minimize near-term unit costs of electricity while simultaneously destroying incentives for many investments, including cost-effective energy efficiency improvements and renewable energy generation, that reduce long-term energy service costs to society as a whole. This result, which has been analogized unpersuasively to trends in telecommunications and natural gas regulation, is neither desirable nor inevitable. States should go on saying no to retail wheeling in order to be able to create something better: regulatory reforms that align utility and societal interests in pursuing a least-cost energy future. An appendix contains notes on some recent Retail Wheeling Campaigns.

Cavanagh, R.

1994-12-31T23:59:59.000Z

106

Drive train design, construction, and evaluation for a powered cart for third world farmers  

E-Print Network [OSTI]

Recommended Grades for Rural Roads Ve rc e Nax. Sustarne Grade (%) Nax. Gra e (%) 2, 3, a4-wheel tractor/trailer Pickup truck Trucks, & 5-tons Trucks, & 5-tons 4 wheel drive 6 12 12 10 20 10 18 18 15 30 A apte rom Been a er et a Vehicles... remains to determine the feasibility for a large company to take on the project. The design work done to date has stressed simplicity for ease of manufacture and repair in the Third World. The vehicle construction could be a part of a more...

Kittelson, David Andrew

2012-06-07T23:59:59.000Z

107

Development of an 800-V Electric Car with Rear-Wheel Drive  

Science Journals Connector (OSTI)

Increasing the voltage level in the traction power network is an evident and reasonable development step in producing sporty and powerful electric cars. Therefore, the engineers at AVL are ... with 1200-V IGBT te...

Dr.-Ing. Armin Engstle; Dipl.-Ing. Mathias Deiml…

2012-07-01T23:59:59.000Z

108

Chapter 71 - Ethics in Regenerative Medicine and Transplantation  

Science Journals Connector (OSTI)

The relationship between regenerative medicine and organ transplantation is characterized by a high degree of complexity and variety, an extraordinary combination of disciplines and technologies, and a broad range of translational development. Research in regenerative medicine and organ transplantation therefore raises an unprecedented mix of ethical issues, both familiar and constantly changing as science advances and societal priorities change. Despite its enormous promise, organ regeneration research remains in the early stages, sharing many features of first-in-human trials, but also expanding and updating the ethical considerations relevant to translational research. These include balancing harms and benefits; ensuring that research is well designed and therefore likely to yield useful data; equitable selection of research subjects; informed consent and the therapeutic misconception; long-term follow-up; and cost, access, and distributive justice.

Nancy M.P. King

2014-01-01T23:59:59.000Z

109

Regenerative thermal oxidation and alternative technologies for VOC control  

SciTech Connect (OSTI)

Thermal oxidation technologies have been used successfully to control VOC`s for many years but the recent 1990 Clean Air Act Amendments have spurred improvements in the established processes and development of economic alternatives. The combination of the regulatory maze and confusion in the selection of the best technology for a particular application has created a potential nightmare for those companies facing a need to reduce their VOC EMISSIONS. The relative advantages and disadvantages of regenerative, recuperative and catalytic oxidizers will be reviewed, with an emphasis on the economic justification for regenerative thermal oxidation (RTO). Control efficiencies of more than 99% have been demonstrated for RTO`s on a multitude of industrial process exhaust streams. Lowest evaluated cost over a fifteen to twenty year effective equipment life is a key selection criteria. This paper describes the underlying principles of thermal oxidation, and discusses the applicability of these and other emerging technologies for VOC control.

Biedell, E.L. [REECQ, Somerville, NJ (United States)

1995-12-31T23:59:59.000Z

110

Retooling Michigan: 'Wheels' to Wind | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Retooling Michigan: 'Wheels' to Wind Retooling Michigan: 'Wheels' to Wind Retooling Michigan: 'Wheels' to Wind July 21, 2010 - 10:12am Addthis This part from the inside of a wind turbine might someday generate clean, renewable energy. | Photo courtesy Merrill Technologies Group This part from the inside of a wind turbine might someday generate clean, renewable energy. | Photo courtesy Merrill Technologies Group Joshua DeLung "Traditionally, we made automotive products," says Scott McKay, General Manager for Merrill Technologies Group in Saginaw, Mich. "After several ups and downs in that industry, we've opened our eyes to finding ways to diversify our line of products, and one of those areas is in making renewable energy materials." Merrill is using $3 million awarded through the U.S. Department of

111

Chapter 30 - Applications of Nanotechnology for Regenerative Medicine  

Science Journals Connector (OSTI)

Publisher Summary This chapter examines the impact of nanotechnology on regenerative medicine related to cellular therapies and biomaterial control, which play an important role for implant design and tissue engineering. Cellular therapies for regenerative medicine would benefit from nanotechnology since tracking of implanted cells would provide the means to better evaluate the viability of engineered tissues and help in understanding the biodistribution and migration pathways of transplanted cells. Nanotechnology would also allow better and more intelligent control of the bioactive factors, which can influence cellular therapies. Biomaterials play an important role in regenerative medicine because they make up a large component of implants and tissue scaffolds. Biocompatible scaffolds could provide temporary structural support guiding cell growth, assist the transportation of essential nutrients, and facilitate the formation of functional tissues and organs. Increasing evidence shows that the nature of the biomaterial greatly affects long-term success of biomedical implants and short-term wound healing response. Substrate features such as the chemical composition and surface morphology affect the viability, adhesion, morphology, and motility of cells. Therefore, controlling the three-dimensional structure and surface composition of a biomaterial is important to promoting normal tissue growth or minimizing foreign body response. The unique properties of nanomaterials and nanostructures could be particularly useful in controlling intrinsic stem cell signals and in dissecting the mechanisms underlying embryonic and adult stem cell behavior.

Benjamin S. Harrison; Sirinrath Sirivisoot

2011-01-01T23:59:59.000Z

112

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

Wheeled, Ball-Flinging Robot A thesis submitted in partiala Two-Wheeled, Ball-Flinging Robot by Po-Ting Chen Master ofremote controlled robot. The robot is maneuverable and

Chen, Po-Ting

2010-01-01T23:59:59.000Z

113

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many  

E-Print Network [OSTI]

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many potential and strength and meet all manufacturer specifications. Abrasive Wheel Machinery and Tools Safety Tip #1

Minnesota, University of

114

E-Print Network 3.0 - atlas big wheel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wheel Search Powered by Explorit Topic List Advanced Search Sample search results for: atlas big wheel Page: << < 1 2 3 4 5 > >> 1 A Slip Model for the Spherical Actuation of the...

115

Analytical framework for the smooth manoeuvre of wheeled mobile robots traversing obstacles  

Science Journals Connector (OSTI)

...the smooth manoeuvre of wheeled mobile robots traversing obstacles S. O. Oyadiji...model the dynamics of wheeled mobile robots (WMRs), which need to travel...characteristics of a traction surface. mobile robots|temporal trajectory|traction...

2005-01-01T23:59:59.000Z

116

Design of an omnidirectional and holonomic wheeled platform prototype  

SciTech Connect (OSTI)

This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independent rotational and translational motion capabilities. We first describe the original orthogonal-wheels assembly'' on which these platforms are based and discuss how a combination of these assemblies is used to generate an omnidirectional capability. The design and control of a prototype platform developed to test and demonstrate the proposed concepts is then described, and experimental results illustrating the full omnidirectionality of the platform with decoupled rotational and translational degrees of freedom are presented. 15 refs., 9 figs.

Killough, S.M.; Pin, F.G.

1991-01-01T23:59:59.000Z

117

Wheel Design and Tension Analysis for the Tethered Axel Rover on Extreme Terrain  

E-Print Network [OSTI]

and then present our experimental results from testing with different wheel designs on flat, sloped, and rocky

118

Development of Legged, Wheeled, and Hybrid Rover Mobility Models to Facilitate Planetary Surface  

E-Print Network [OSTI]

that wheeled mobility is best suited for flat and level terrain, and legged mobility is best suited for rocky

119

2 DOF Low Cost Platform for Driving Simulator: Modeling and Control Hichem Arioui, Salim Hima and Lamri Nehaoua  

E-Print Network [OSTI]

of the longitudinal and yaw movements. To enhance the drive immersion in the virtual world, a haptic feedback steering wheel will be implemented. The whole system is considered as a two coupled systems and linked mechanically. The first system consists in motorized rail for the longitudinal movement while the second system

Paris-Sud XI, Université de

120

Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots  

E-Print Network [OSTI]

a tightly cooperative task, where the humanoid robot and the wheeled robot follow for a long distance a ballCooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots Jutta and a wheeled robot with largely complementing and some competing capabilities. By combining two strongly

Stryk, Oskar von

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Experimental assessment of wheel/rail interaction force with rolling noise analysis  

E-Print Network [OSTI]

pressure and vibration of the wheel are compared to the measured one to validate the method 1 Introduction to measure the acous- 1Track Wheel Interaction Noise Software tic impedance and vibration mobility (transfert function be- tween vibration velocity and input force) of the wheel and the track. A measurement campaign

Paris-Sud XI, Université de

122

Holiday Food Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Food Drive Food Drive Holiday Food Drive During the recent holiday food drive, employees donated enough food to provide about 23,604 holiday meals for Northern New Mexico families. More than 432 frozen turkeys were donated this year by employees and other donors during 'Bring a Turkey to Work Day,' an annual Lab event that takes places Thanksgiving week. September 16, 2013 LANL employees organize food for the Holiday Food Drive. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping feed Northern New Mexico families Community partners The Food Depot (Santa Fe) Del Norte Credit Union Smith's Food and Drug Giving Holiday Food Drive Holiday Gift Drive LANL Laces Los Alamos Employees' Scholarship Fund

123

Electric Power Controller for Steering Wheel Management in Electric Cars  

E-Print Network [OSTI]

Electric Power Controller for Steering Wheel Management in Electric Cars Vicente Milanés, Joshué-- Autonomous vehicles, Power control, System analysis and design, Intelligent transportation systems. I they are named hydraulic power steering (HPS) systems. If an electric motor is used then they are named electric

Paris-Sud XI, Université de

124

A FULLY DISTRIBUTED PRIME NUMBERS GENERATION USING THE WHEEL SIEVE  

E-Print Network [OSTI]

A FULLY DISTRIBUTED PRIME NUMBERS GENERATION USING THE WHEEL SIEVE Gabriel Paillard Laboratoire d distributed approach for generating all prime numbers up to a given limit. From Er- atosthenes, who elaborated. In this work, we propose a new distributed algorithm which generates all prime num- bers in a given finite

Paris-Sud XI, Université de

125

Issues in Controllability and Motion Planning for Overconstrained Wheeled Vehicles  

E-Print Network [OSTI]

model, hereafter referred to as the Simplified Rocky 7 (or SR7), the vehicle operates on flat terrain during the Mars Pathfinder mission. Fig. 1 shows the "Rocky 7," a prototype for future Mars rover vehicles whose suspension and wheel kinematics are essentially identical to the Sojourner. The Rocky 7

Hartmann, Mitra J. Z.

126

Theoretical and experimental study on regenerative rotary displacer Stirling engine  

SciTech Connect (OSTI)

Recently a quite new type of hot air engine called rotary displacer engine, in which the displacer is a rotating disk enclosed in a cylinder, has been conceived and developed. The working gas, contained in a notch excavated in the disk, is heated and cooled alternately, on account of the heat transferred through the enclosing cylinder that is heated at one side and cooled at the opposite one. The gas temperature oscillations cause the pressure fluctuations that get out mechanical power acting on a power piston. In order to attempt to increase the performances for this kind of engine, the authors propose three different regeneration methods. The first one comprises two coaxial disks that, revolving in opposite ways, cause a temperature gradient on the cylinder wall and a regenerative axial heat conduction through fins shaped on the cylinder inner wall. The other two methods are based on the heat transferred by a proper closed circuit that in one case has a circulating liquid inside and in the other one is formed by several heat pipes working each one for different temperatures. An engine based on the first principle, the Regenerative Tandem Contra-Rotary Displacer Stirling Engine, has been realized and experimented. In this paper experimental results with and without regeneration are reported comparatively with a detailed description of the unity. A basic explanation of the working principle of this engine and a theoretical analysis investigating the main influential parameters for the regenerative effect are done. This new rotating displacer Stirling engines, for their simplicity, are expected to attain high rotational speed especially for applications as demonstration and hobby unities.

Raggi, L.; Katsuta, Masafumi [Waseda Univ., Tokyo (Japan); Isshiki, Naotsugu [Nihon Univ., Tokyo (Japan); Isshiki, Seita [Isshiki R and D Lab., Tokyo (Japan)

1997-12-31T23:59:59.000Z

127

US DRIVE Driving Research and Innovation for Vehicle Efficiency...  

Broader source: Energy.gov (indexed) [DOE]

Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy...

128

Propellant feed system of a regeneratively cooled scramjet  

SciTech Connect (OSTI)

An expander cycle for an airframe-integrated hydrogen-fueled scramjet is analyzed to study regenerative cooling characteristics and overall specific impulse. Below Mach 10, the specific impulse and thrust coincide with the reference values. At Mach numbers above 10, a reduction of the specific impulse occurs due to the coolant flow rate requirement, which is accompanied by an increase of thrust. It is shown that the thrust may be increased by injecting excess fuel into the combustor to compensate for the decrease of the specific impulse. 9 refs.

Kanda, Takeshi; Masuya, Goro; Wakamatsu, Yoshio (National Aerospace Laboratory, Kakuda (Japan))

1991-04-01T23:59:59.000Z

129

Improvements of vehicle fuel economy using mechanical regenerative braking  

Science Journals Connector (OSTI)

The paper presents a mixed theoretical and experimental evaluation of the improvements in fuel economy that follow the introduction of a mechanical Kinetic Energy Recovery System (KERS) on a full size passenger car. This system, made up of a high speed storage flywheel and a Constant Variable Transmission (CVT), has a full regenerative cycle overall efficiency about twice the efficiency of battery-based hybrids. With reference to the baseline configuration having a 4L gasoline engine, adoption of a KERS may reduce the fuel consumption covering the NEDC by 25% without downsizing, and by 33% downsizing the engine to 3.3L.

Alberto A. Boretti

2011-01-01T23:59:59.000Z

130

Innovative grinding wheel design for cost-effective machining of advanced ceramics. Phase I, final report  

SciTech Connect (OSTI)

Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics. This program was a cooperative effort involving three Norton groups representing a superabrasive grinding wheel manufacturer, a diamond film manufacturing division and a ceramic research center. The program was divided into two technical tasks, Task 1, Analysis of Required Grinding Wheel Characteristics, and Task 2, Design and Prototype Development. In Task 1 we performed a parallel path approach with Superabrasive metal-bond development and the higher technical risk, CVD diamond wheel development. For the Superabrasive approach, Task 1 included bond wear and strength tests to engineer bond-wear characteristics. This task culminated in a small-wheel screening test plunge grinding sialon disks. In Task 2, an improved Superabrasive metal-bond specification for low-cost machining of ceramics in external cylindrical grinding mode was identified. The experimental wheel successfully ground three types of advanced ceramics without the need for wheel dressing. The spindle power consumed by this wheel during test grinding of NC-520 sialon is as much as to 30% lower compared to a standard resin bonded wheel with 100 diamond concentration. The wheel wear with this improved metal bond was an order of magnitude lower than the resin-bonded wheel, which would significantly reduce ceramic grinding costs through fewer wheel changes for retruing and replacements. Evaluation of ceramic specimens from both Tasks 1 and 2 tests for all three ceramic materials did not show evidence of unusual grinding damage. The novel CVD-diamond-wheel approach was incorporated in this program as part of Task 1. The important factors affecting the grinding performance of diamond wheels made by CVD coating preforms were determined.

Licht, R.H.; Ramanath, S.; Simpson, M.; Lilley, E.

1996-02-01T23:59:59.000Z

131

Could Gaussian regenerative stations act as quantum repeaters?  

E-Print Network [OSTI]

Higher transmission loss diminishes the performance of optical communication|be it the rate at which classical or quantum data can be sent reliably, or the secure key generation rate of quantum key distribution (QKD). Loss compounds with distance|exponentially in an optical fiber, and inverse-square with distance for a free-space channel. In order to boost classical communication rates over long distances, it is customary to introduce regenerative relays at intermediate points along the channel. It is therefore natural to speculate whether untended regenerative stations, such as phase-insensitive or phase-sensitive optical amplifiers, could serve as repeaters for long-distance QKD. The primary result of this paper rules out all bosonic Gaussian channels to be useful as QKD repeaters, which include phase-insensitive and phase-sensitive amplifiers as special cases, for any QKD protocol. We also delineate the conditions under which a Gaussian relay renders a lossy channel entanglement breaking, which in turn makes the channel useless for QKD.

Ryo Namiki; Oleg Gittsovich; Saikat Guha; Norbert Lütkenhaus

2014-10-02T23:59:59.000Z

132

Fast Threat Detection and Localization Using Super-Regenerative Transceiver in  

E-Print Network [OSTI]

Fast Threat Detection and Localization Using Super-Regenerative Transceiver in Random Noise Radar-Regenerative (SRG) transceiver as a type of ultra-fast electronics platform for threat detection and localization the Angle-of-Arrival (AOA) information of the inbound threats. Simulations and detailed laboratory

Zhang, Yan

133

Modeling Process Characteristics and Performance of Fixed and Fluidized Bed Regenerative Thermal Oxidizer  

Science Journals Connector (OSTI)

Modeling Process Characteristics and Performance of Fixed and Fluidized Bed Regenerative Thermal Oxidizer ... (7)?Cheng, W.-H.; Chou, M.-S.; Lee, W.-S.; Huang, B.-J. Applications of Low-Temperature Regenerative Thermal Oxidizers to Treat Volatile Organic Compounds. ...

Pietropaolo Morrone; Francesco P. Di Maio; Alberto Di Renzo; Mario Amelio

2006-05-26T23:59:59.000Z

134

A New Absorption Cycle: The Single-Effect Regenerative Absoprtion Refrigeration Cycle  

E-Print Network [OSTI]

I r;,.foO REGENERATIVE ABSORPTION Y- Wz Z .lW U t- o 0:I:I I I /f I I I ~~-/5f=- - - - ABSORPTION .c:::. ." ." ,,,"l e lR (regene r ative absorption) using NH3/H20 mixture s .

Dao, K.

2011-01-01T23:59:59.000Z

135

Integration and Dynamics of a Renewable Regenerative Hydrogen Fuel Cell System  

E-Print Network [OSTI]

Integration and Dynamics of a Renewable Regenerative Hydrogen Fuel Cell System by Alvin Peter, hydrogen and electricity storage, and fuel cells. A special design feature of this test bed is the ability of the author. #12;ii Supervisory Committee Integration and Dynamics of a Renewable Regenerative Hydrogen Fuel

Victoria, University of

136

Modular PM Motor Drives for Automotive Traction Applications  

SciTech Connect (OSTI)

This paper presents modular permanent magnet (PM) motor drives for automotive traction applications. A partially modularized drive system consisting of a single PM motor and multiple inverters is described. The motor has multiple three-phase stator winding sets and each winding set is driven with a separate three-phase inverter module. A truly modularized inverter and motor configuration based on an axial-gap PM motor is then introduced, in which identical PM motor modules are mounted on a common shaft and each motor module is powered by a separate inverter module. The advantages of the modular approach for both inverter and motor include: (1) power rating scalability--one design meets different power requirements by simply stacking an adequate number of modules, thus avoiding redesigning and reducing the development cost, (2) increased fault tolerance, and (3) easy repairing. A prototype was constructed by using two inverters and an axial-gap PM motor with two sets of three-phase stat or windings, and it is used to assist the diesel engine in a hybrid electric vehicle converted from a Chevrolet Suburban. The effect of different pulse-width-modulation strategies for both motoring and regenerative modes on current control is analyzed. Torque and regenerative control algorithms are implemented with a digital signal processor. Analytical and initial testing results are included in the paper.

Su, G.J.

2001-10-29T23:59:59.000Z

137

Heat transfer and combustion characteristics of a burner with a rotary regenerative heat exchanger  

SciTech Connect (OSTI)

The authors have developed a Rotary Regenerative Combustion (RRX) System, which is coupled with a compact high efficiency regenerative air heat exchanger and a combustion burner. This system contributes to saving energy of fuel firing industrial furnaces and decreases NO{sub x} emission. This technology can be considered as a solution of greenhouse problem. This paper, discusses a compact high efficiency regenerative air heat exchanger in comparison with the existing types of regenerative burners and reverse firing with high momentum fuel jet (with motive fluid) in the furnace. This burner is compact in size, with high fuel efficiency, low NOx emission, easy to operate, and reliable, based on the results of field tests and commercial operations. The authors can say that the RRX system is a regenerative burner of the second generation.

Hirose, Yasuo; Kaji, Hitoshi; Arai, Norio

1998-07-01T23:59:59.000Z

138

Improving the efficiency and availability analysis of a modified reheat regenerative Rankine cycle  

SciTech Connect (OSTI)

Reheating in a reheat regenerative steam power cycle increases efficiency by increasing the average temperature of heat reception, but also increases the irreversibility of feed water heaters by raising the temperature of the superheated steam used for the regenerative process. This paper introduces some modifications to the regular reheat regenerative steam power cycle that reduce the irreversibility of the regenerative process. An availability analysis of the modified cycle and the regular reheat regenerative cycle as well as a comparison study between both cycles is done. The results indicate that a gain in energy efficiency of up to 2.5% as the steam generator pressure varies is obtained when applying such modifications at the same conditions of pressure, temperature's number of reheating stages, and feed water heaters. The availability analysis showed that such increase in efficiency is due to the reduction of the irreversibility of the regeneration process of the modified cycle.

Bassily, A.M.

1999-07-01T23:59:59.000Z

139

Short-circuit simulations help quantify wheeling flow  

SciTech Connect (OSTI)

During the late 1960s, three nuclear power plants were constructed in New England: Connecticut Yankee (590 MW, located in Haddam, Connecticut), Maine Yankee (870 MW located in Wiscasset, Maine), and Vermont Yankee (520 MW, located in Vernon, Vermont). Up to thirty-three New England utilities and municipalities participate in each. These units, called the Yankee units, are connected to the New England 345 kV transmission system. Built before the conception of the New England Power Pool (NEPOOL), these units rely on negotiated transmission agreements to implement the purchased power contracts. The Yankee Transmission Agreements were established to provide a mechanism for New England utilities, which provide the transmission wheeling services, to be adequately compensated for delivering the Yankee power. Under the agreements, the purchasing utilities (those utilities who purchase power from the nuclear plants) would pay into separate transmission funds based on their entitlement in the unit. The fund is then distributed among the transmitting utilities (those utilities providing the transmission wheeling services) based on the calculated use of their transmission systems. A methodology was established that could equal the units` life, offer flexibility to a changing system, and provide equitable results. This article describes how using commercially available software to automate simulations, perform the MW-miles calculation, and tabulate the results significantly reduces the time and computational effort to perform the wheeling calculations.

Scarfone, A.

1995-04-01T23:59:59.000Z

140

Holiday Gift Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Holiday Gift Drive Holiday Gift Drive Holiday Gift Drive Every year, Laboratory employees help fulfill the holiday wishes of children and seniors in our communities. In 2012, our employees helped more than 1,030 Northern New Mexico children, senior citizens and families have a brighter holiday season. September 16, 2013 Every holiday season, employees of Los Alamos National Laboratory donate and distribute gifts to families in need throughout Northern New Mexico. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping New Mexico families feel the holiday spirit The 2013 campaign runs from November 21-December 18. 2012 Holiday Gift Drive partners Boys and Girls Club Del Norte (Abiquiu Site)

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Reduction of carbon monoxide emissions with regenerative thermal oxidizers  

SciTech Connect (OSTI)

Regenerative thermal oxidizers (RTOs) have been extensively used for the control of volatile organic compound (VOC) emissions from various sources. However, very little information is available on the ability of RTOs to control carbon monoxide (CO) emissions. This paper presents the results of extensive tests conducted on two RTOs to determine their VOC and CO control efficiencies. The inlet gas stream to the RTOs includes VOC and CO concentrations as high as 2,000 ppm and 3,600 ppm, respectfully. The testing demonstrated that both RTOs were capable of controlling greater than 98% of both inlet VOCs and CO. While the destruction efficiencies within the combustion chambers exceeded 99.9%, direct leakage past valves accounted for the lower control efficiencies. The tests indicated that the overall VOC and CO control efficiencies of the RTOs may be limited by valve leakage. The design and permitting of a RTO should include conservative control estimates which account for possible valve leakage.

Firmin, S.M.; Lipke, S.; Baturay, A.

1996-09-01T23:59:59.000Z

142

Performance analysis of reciprocating regenerative magnetic heat pumping. Final report  

SciTech Connect (OSTI)

Transient flow phenomena in the regenerator tube of reciprocating magnetic heat pumps have been studied numerically and experimentally. In the numerical study, two approaches were taken: (1) solving the energy balance equations for fluid through a porous bed directly and (2) solving the Navier-Stokes equations with a buoyancy force term in the momentum equation. A flow thermal mixing problem was found in both approaches because of the piston-like motion of the regenerator tube that hinders the development of the temperature. The numerical study results show that a 45 K temperature span can be reached in 10 minutes of charge time through the use of a 7-Tesla magnetic field. Using the second numerical approach, temperature stratification in the regenerator fluid column was clearly indicated through temperature rasters. The study also calculates regenerator efficiency and energy delivery rates when heating load and cooling load are applied. Piecewise variation of the regenerator tube moving speed has been used in the present numerical study to control the mass flow rate, reduce thermal mixing of the flow and thus the regenerative losses. The gadolinium`s adiabatic temperature has been measured under 6.5 Tesla of magnet field and different of operating temperatures ranging from 285 K to 320 K. Three regenerative heat pumping tests have also been conducted based on the Reynolds number of the regenerator tube flow, namely Re=300, Re=450, and Re=750 without loads. Maximum temperature span are 12 & 11 K and 9 K for the case of Re=300, Re=450 and Re=750, respectively. Experimental data are in good agreement with the numerical calculation results, and have been used to calibrate the numerical results and to develop a design database for reciprocating-type room-temperature magnetic heat pumps.

Chen, D.T. [Oak Ridge Associated Universities, Inc., TN (United States); Murphy, R.W.; Mei, V.C.; Chen, F.C.; Lue, J.W.; Lubell, M.S. [Oak Ridge National Lab., TN (United States)

1994-02-01T23:59:59.000Z

143

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

Treu, C.A. Jr.

1999-08-31T23:59:59.000Z

144

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

Treu, Jr., Charles A. (Raymore, MO)

1999-08-31T23:59:59.000Z

145

Memory Hard Drive Peripherals  

E-Print Network [OSTI]

1! CSI3131 Topics CPU Memory Hard Drive Peripherals Computing Systems OS Overview StructureDeadlocks M em ory M anagem ent Basic Memory Managermtn Virtual Memory Storage and I/O File Systems Hard Drive Management Swap I/O Management 2 Module 7: Memory Management Reading: Chapter 8 § To provide a detailed

Stojmenovic, Ivan

146

Traction Drive Systems Breakout  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Traction Drive Systems Breakout Traction Drive Systems Breakout John M. Miller, PhD, PE, F.IEEE, F.SAE Oak Ridge National Laboratory Facilitator July 24, 2012 EV Everywhere Grand Challenge Vehicle Technologies Program - Advanced Power Electronics and Electric Motors eere.energy.gov EV Everywhere Traction Drive System * DOE goals for Electric Traction Drive System (TDS) innovations must be disruptive innovation focused to meet the CY2022 price target ($20,000 $25,000) for a mid-sized 5 passenger sedan having 5 year simple payback. Enhanced Efficiency Reduced Cost Traction Drive System EETT Roadmap: "Therefore, research is needed to develop technologies that are less expensive and, at the same time, smaller, lighter, more efficient, and equally reliable as conventional automotive technologies. "

147

Regenerative oxidizer recovers 85% fume control energy, saves $350,000 annually  

SciTech Connect (OSTI)

Expansion of production for carbofuran insecticides increased ventilation requirements for fume and odor control from 8,000 to 50,000 scfm at FMC Corporation's Middleport, NY plant. A seven-lobe, closed thermal regenerative oxidation system was installed with heat recovery of up to 90%. Performance, operation, and results of the regenerative oxidizer are described. Almost a million gallons of oil are conserved annually which is equivalent to about 90% of plant requirements for steam generation.

McElhinney, R.

1980-05-01T23:59:59.000Z

148

Billiards Digest June, 2012 "VEPP Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES  

E-Print Network [OSTI]

Control and English." "Wagon wheel" drills are very useful to help you practice and develop cue ball (CB angle slightly for each ball. There is actually a system you can use to help decide where to placeBilliards Digest June, 2012 "VEPP ­ Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES David

Alciatore, David G.

149

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled Mobile Robot  

E-Print Network [OSTI]

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled is a dynamically stable mobile robot that moves on a single spherical wheel and is capable of omni- directional movement. The ballbot is an underactuated system with nonholonomic dynamic constraints. The authors propose

150

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile  

E-Print Network [OSTI]

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile Robot. It actively balances and moves on a single wheel using closed loop feedback, making it dynamically stable it a good candidate for operating in human environments. Balancing on a ball allows Ballbot to be omni

151

Bilateral Teleoperation of Wheeled Mobile Robot with Time Delay using Virtual Image Robot  

E-Print Network [OSTI]

Bilateral Teleoperation of Wheeled Mobile Robot with Time Delay using Virtual Image Robot Yasunori of wheeled mobile robot with time delay using the virtual image robot. In this paper, we introduce the virtual image robot as a master robot. The human operator commands the virtual image robot, the slave

152

Modelling and simulation of double-link scenario in a two-wheeled wheelchair  

Science Journals Connector (OSTI)

Wheelchairs on two wheels are essential part of life for disabled persons. But designing control strategies for these wheelchairs is a challenging task due to the fact that they are highly nonlinear and unstable systems. The subtle design of the system ... Keywords: Disabled, Double Inverted Pendulum, Mathematical Modelling, Two-Wheeled Mobile Robot, Wheelchair

Salmiah Ahmad; Nazmul H. Siddique; M. O. Tokhi

2014-04-01T23:59:59.000Z

153

Flexible, Wide-Area Storage for Distributed Systems with WheelFS  

E-Print Network [OSTI]

WheelFS is a wide-area distributed storage system intended to help multi-site applications share data and gain fault tolerance. WheelFS takes the form of a distributed file system with a familiar POSIX interface. Its design ...

Stribling, Jeremy

154

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado  

SciTech Connect (OSTI)

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado By Richard “Rick” Zehner Geothermal Development Associates Reno Nevada USA 775.737.7806 rzehner@gdareno.com For Flint Geothermal LLC, Denver Colorado Part of DOE Grant EE0002828 2013 This is an ESRI geodatabase version 10, together with an ESRI MXD file version 10.2 Data is in UTM Zone 13 NAD27 projection North boundary: approximately 4,189,000 South boundary: approximately 4,170,000 West boundary: approximately 330,000 East boundary: approximately 351,000 This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs at Wagon Wheel Gap have geochemistry and geothermometry values indicative of high-temperature systems. The datasets in the geodatabase are a mixture of public domain data as well as data collected by Flint Geothermal, now being made public. It is assumed that the user has internet access, for the mxd file accesses ESRI’s GIS servers. Datasets include: 1. Results of reconnaissance shallow (2 meter) temperature surveys 2. Air photo lineaments 3. Groundwater geochemistry 4. Power lines 5. Georeferenced geologic map of Routt County 6. Various 1:24,000 scale topographic maps

Richard Zehner

2012-11-01T23:59:59.000Z

155

Variable Frequency Drives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

How BPA Supports VFDs Rebates are available from your utility for Variable Frequency Drives on pumps 20hp or greater and storage fans.. Energy savings from VFDs vary and can...

156

Chapter 10 - Regenerative catalytic oxidizer technology for VOC control  

Science Journals Connector (OSTI)

Publisher Summary The regenerative catalytic oxidizer (RCO) technology has evolved significantly as an efficient method to control volatile organic compounds. The RCO technology favors using oxide catalysts because it allows for easy compensation of lower activity by an increase in the catalyst amount or temperature. Heat transfer and accumulation properties of ceramic packing material strongly influence RCO performance. The rate of heat transfer affects the temperature gradients along the bed length that, in turn, determine the volume of material required to preheat the gas to the temperature of catalytic or thermal oxidation. During the catalyst operation, it gradually becomes less active and must be eventually replaced. The factors affecting the catalyst lifetime include high temperature, catalytic poisons, and masking agents. Compounds of halogens and sulfur are the most common catalyst poisons. Temperature control, poison tolerant catalysts, and gas-flow pretreatment are used to reduce the impact of catalyst deactivation. This chapter also presents the behavior of an RCO when the catalyst deactivates, and proposes strategies ensuring the required performance during the entire catalyst lifetime.

V.O. Strots; G.A. Bunimovich; C.R. Roach; Yu.Sh. Matros

2000-01-01T23:59:59.000Z

157

Automobile Driving and Aggressive Behavior  

E-Print Network [OSTI]

The accident prone automobile driver. American Journal ofAutomobile Driving And Aggressive Behavior Raymond W. Novacofor its content or use. Automobile Driving and Aggressive

Novaco, Raymond W.

1991-01-01T23:59:59.000Z

158

Traction Drive Systems Breakout Group  

Broader source: Energy.gov (indexed) [DOE]

overlook profit motive in value chain * 4 - Today's HEV systems drive EV traction drive systems because of manufacturing base Barriers Interfering with Reaching the Targets * 1 -...

159

Macroporous n-GaP in Nonaqueous Regenerative Photoelectrochemical Cells  

Science Journals Connector (OSTI)

Michelle J. Price and Stephen Maldonado * ... Photoelectrochemical cells are attractive systems for the generation of energy-rich chemical fuels. ... (1-4) Generally, larger operating cell voltages than those obtained with commercial silicon (Si) photovoltaics under solar illumination at 1.5 air mass units (AMU) are needed to drive kinetically slow, multielectron charge-transfer reactions involved in fuel production. ...

Michelle J. Price; Stephen Maldonado

2009-06-22T23:59:59.000Z

160

Electric vehicle drive train with direct coupling transmission  

DOE Patents [OSTI]

An electric vehicle drive train includes an electric motor and an associated speed sensor, a transmission operable in a speed reduction mode or a direct coupled mode, and a controller responsive to the speed sensor for operating the transmission in the speed reduction mode when the motor is below a predetermined value, and for operating the motor in the direct coupled mode when the motor speed is above a predetermined value. The controller reduces the speed of the motor, such as by regeneratively braking the motor, when changing from the speed reduction mode to the direct coupled mode. The motor speed may be increased when changing from the direct coupled mode to the speed reduction mode. The transmission is preferably a single stage planetary gearbox.

Tankersley, Jerome B. (Fredericksburg, VA); Boothe, Richard W. (Roanoke, VA); Konrad, Charles E. (Roanoke, VA)

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Treating isopropyl alcohol by a regenerative catalytic oxidizer  

Science Journals Connector (OSTI)

Regenerative catalytic oxidizer (RCO) can be conveniently used to control emissions of volatile organic compounds (VOCs), because of their thermal recovery efficiency (TRE), low fuel cost and high oxidation. In this work, catalysts with various metal weight loadings were prepared by deposition–precipitation, wet impregnation and incipient impregnation to treat isopropyl alcohol (IPA). We used the excellent catalytic performance in a pilot RCO to test IPA oxidation performance under various conditions. The best catalyst was selected and its TRE, bed temperature variations, pressure drops and selectivity of the catalyst were more widely discussed. The results demonstrate that the optimal catalyst was prepared by wet impregnation with 20 wt.% metal on ceramic honeycomb (CH). 20 wt.% Cu–Co/(CH) catalyst was the best catalyst used in a RCO because it was effective in treating IPA, with a CO2 yield of up to 95% at a heating zone temperature (Tset) = 400 °C under various conditions. It also had the largest tolerance of variations in inlet IPA concentration and gas velocity (Ug). This 20 wt.% Cu–Co/(CH) catalyst in a RCO performed well in terms of TRE, pressure drop and selectivity to CO2. The TRE range in a RCO was from 87.8 to 91.2% under various conditions, and decreased as Ug increased in a fixed Tset. The pressure drop increased with Ug and Tset. The selectivity to CO2 increased to over 95% at 300 °C, and that to propene remained at 2–5% from 200 to 400 °C. Finally, the stability test results indicated that the 20 wt.% Cu–Co/(CH) catalyst was very stable at various CO2 yields and temperatures.

Jie-Chung Lou; Shih-Wei Huang

2008-01-01T23:59:59.000Z

162

Electric-Drive Vehicle engineering  

E-Print Network [OSTI]

Electric-Drive Vehicle engineering COLLEGE of ENGINEERING Electric-drive engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electric-drive vehicle

Berdichevsky, Victor

163

The feasibility of a unitised regenerative fuel cell with a reversible carbon-based hydrogen storage electrode.  

E-Print Network [OSTI]

??This thesis seeks to experimentally demonstrate the possibility of reversible storage of hydrogen directly into a carbon-based electrode of a PEM unitised regenerative fuel cell.… (more)

Jazaeri, M

2013-01-01T23:59:59.000Z

164

Drive5 | Open Energy Information  

Open Energy Info (EERE)

Drive5 Drive5 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Drive5 Agency/Company /Organization: Drive5 Sector: Energy Focus Area: Vehicles Resource Type: Software/modeling tools User Interface: Website, Mobile Device Website: www.drive5.us Web Application Link: www.drive5.us Cost: Free OpenEI Keyword(s): Challenge Generated Drive5 Screenshot References: Drive5[1] Challenge.gov[2] Challenge.gov Submission Page[3] Measure your fuel economy real time with five metrics to save on fuel costs. Overview Drive1: Fuel Economy Drive5 gives you real time fuel economy feedback for any car 1984 and newer by simply utilizing the sensors embedded in your phone or tablet. It uses a statistical algorithm which leverages the fueleconomy.gov's open dataset along with data from thousands of automobile trips. No connections to the

165

Photo of the Week: A Driving Force for Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

A Driving Force for Natural Gas A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas September 28, 2012 - 3:04pm Addthis Since 1977, the people of the U.S. Department of Energy have been delivering the science, innovation and expertise required to advance America's energy, economic and national security. In this photo taken in June 1988, former Secretary of Energy John Herrington takes the wheel of a clean natural gas vehicle in front of the Energy Department in Washington, DC. Today, natural gas powers over 112,000 vehicles in the United States and roughly 14.8 million vehicles worldwide. Natural gas vehicles, which can run on compressed natural gas, are a good option for high-mileage, centrally-fueled fleets that operate within a limited area. | Photo courtesy of the Department of Energy.

166

Photo of the Week: A Driving Force for Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Photo of the Week: A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas September 28, 2012 - 3:04pm Addthis Since 1977, the people of the U.S. Department of Energy have been delivering the science, innovation and expertise required to advance America's energy, economic and national security. In this photo taken in June 1988, former Secretary of Energy John Herrington takes the wheel of a clean natural gas vehicle in front of the Energy Department in Washington, DC. Today, natural gas powers over 112,000 vehicles in the United States and roughly 14.8 million vehicles worldwide. Natural gas vehicles, which can run on compressed natural gas, are a good option for high-mileage, centrally-fueled fleets that operate within a limited area. | Photo courtesy of the Department of Energy.

167

Variable Frequency Pump Drives  

E-Print Network [OSTI]

-frequency electric motor drive. What is happenin9 with variable frequency driven pun,ps is a classical illustration that evolution in technical products takes place not only because of changes in the processes served by these products, or because of innovations...-pole 3550 rpm squirrel caqe induction motor became available in the early 1930s that high pressure pumps operating at that speed could be buil t. And now, in the 1980s, the development of the solid-state, variable frequency electric motor drive...

Karassik, I. J.; Petraccaro, L. L.; McGuire, J. T.

168

Adaptive scapula bone remodeling computational simulation: Relevance to regenerative medicine  

SciTech Connect (OSTI)

Shoulder arthroplasty success has been attributed to many factors including, bone quality, soft tissue balancing, surgeon experience, and implant design. Improved long-term success is primarily limited by glenoid implant loosening. Prosthesis design examines materials and shape and determines whether the design should withstand a lifetime of use. Finite element (FE) analyses have been extensively used to study stresses and strains produced in implants and bone. However, these static analyses only measure a moment in time and not the adaptive response to the altered environment produced by the therapeutic intervention. Computational analyses that integrate remodeling rules predict how bone will respond over time. Recent work has shown that subject-specific two- and three dimensional adaptive bone remodeling models are feasible and valid. Feasibility and validation were achieved computationally, simulating bone remodeling using an intact human scapula, initially resetting the scapular bone material properties to be uniform, numerically simulating sequential loading, and comparing the bone remodeling simulation results to the actual scapula’s material properties. Three-dimensional scapula FE bone model was created using volumetric computed tomography images. Muscle and joint load and boundary conditions were applied based on values reported in the literature. Internal bone remodeling was based on element strain-energy density. Initially, all bone elements were assigned a homogeneous density. All loads were applied for 10 iterations. After every iteration, each bone element’s remodeling stimulus was compared to its corresponding reference stimulus and its material properties modified. The simulation achieved convergence. At the end of the simulation the predicted and actual specimen bone apparent density were plotted and compared. Location of high and low predicted bone density was comparable to the actual specimen. High predicted bone density was greater than actual specimen. Low predicted bone density was lower than actual specimen. Differences were probably due to applied muscle and joint reaction loads, boundary conditions, and values of constants used. Work is underway to study this. Nonetheless, the results demonstrate three dimensional bone remodeling simulation validity and potential. Such adaptive predictions take physiological bone remodeling simulations one step closer to reality. Computational analyses are needed that integrate biological remodeling rules and predict how bone will respond over time. We expect the combination of computational static stress analyses together with adaptive bone remodeling simulations to become effective tools for regenerative medicine research.

Sharma, Gulshan B., E-mail: gbsharma@ucalgary.ca [Emory University, Department of Radiology and Imaging Sciences, Spine and Orthopaedic Center, Atlanta, Georgia 30329 (United States); University of Pittsburgh, Swanson School of Engineering, Department of Bioengineering, Pittsburgh, Pennsylvania 15213 (United States); University of Calgary, Schulich School of Engineering, Department of Mechanical and Manufacturing Engineering, Calgary, Alberta T2N 1N4 (Canada); Robertson, Douglas D., E-mail: douglas.d.robertson@emory.edu [Emory University, Department of Radiology and Imaging Sciences, Spine and Orthopaedic Center, Atlanta, Georgia 30329 (United States); University of Pittsburgh, Swanson School of Engineering, Department of Bioengineering, Pittsburgh, Pennsylvania 15213 (United States)

2013-07-01T23:59:59.000Z

169

The Study of Wheeled Semi-trailer Design and Development Based on Scale Model  

Science Journals Connector (OSTI)

One type of wheeled semi-trailer is a complex system which consists of ... design process. In the structural design of hydraulic torque converter, we use the hierarchical multi...4). ...

Xiong Xin; Xuexun Guo…

2013-01-01T23:59:59.000Z

170

KINEMATIC CONTROL OF A NONHOLONOMIC WHEELED MOBILE MANIPULATOR A DIFFERENTIAL FLATNESS APPROACH  

E-Print Network [OSTI]

maintenance robots to robotic earth-moving excavators to free-flying satellite-repair robots, have capitalized of operation make disk wheels popular, the kinematics of rolling contact creates nonholonomic constraints

Krovi, Venkat

171

Direction and control adjustment for smooth motion of wheeled mobile robots  

Science Journals Connector (OSTI)

Control of wheeled mobile robots (differential or steering wheel structure) has been studied extensively in the last decades, and many control strategies were proposed for various applications. This paper will present the solutions to two issues encountered in the implementation of the controllers: over corrections of the robot's heading direction and saturation of the control efforts. The solutions to the problems and their experimental verifications are provided.

L. Huang

2010-01-01T23:59:59.000Z

172

Drive alignment pays maintenance dividends  

SciTech Connect (OSTI)

Proper alignment of the motor and gear drive on conveying and processing equipment will result in longer bearing and coupling life, along with lower maintenance costs. Selecting an alignment free drive package instead of a traditional foot mounted drive and motor is a major advancement toward these goals. 4 photos.

Fedder, R. [Rexnord Industries, Milwaukee, WI (United States)

2008-12-15T23:59:59.000Z

173

Electric Drive Transportation Association Conference | Department...  

Energy Savers [EERE]

Association Conference Electric Drive Transportation Association Conference Addthis Test Drive 1 of 5 Test Drive Deputy Assistant Secretary for Transportation Reuben Sarkar...

174

Corrosion Control Using Regenerative Biofilms on Aluminum 2024 and Brass in Different Media  

E-Print Network [OSTI]

Corrosion Control Using Regenerative Biofilms on Aluminum 2024 and Brass in Different Media F. Mansfeld,a, *,z H. Hsu,a D. O¨ rnek,b T. K. Wood,b and B. C. Syrettc a Corrosion and Environmental Effects Institute, Palo Alto, California 94303, USA The corrosion behavior of Al 2024-T3 and C26000 brass exposed

Wood, Thomas K.

175

Corrosion control using regenerative biofilms (CCURB) on brass in different media  

E-Print Network [OSTI]

Corrosion control using regenerative biofilms (CCURB) on brass in different media D. OOrnek a , T of Chemical Engineering, University of Connecticut, Storrs, CT 06269-3222, USA b Corrosion and Environmental The corrosion behavior of cartridge brass (UNS C26000) exposed to artificial seawater (AS) and Luria Bertani (LB

Wood, Thomas K.

176

Pitting corrosion control using regenerative biolms on aluminium 2024 in articial seawater  

E-Print Network [OSTI]

Pitting corrosion control using regenerative bio®lms on aluminium 2024 in arti®cial seawater D, CT 06269-3222, USA b Corrosion and Environment Eects Laboratory (CEEL), Department of Materials polyglutamate or polyaspartate, an additional small increase in corrosion inhibition occurred. Corrosion control

Wood, Thomas K.

177

High-energy kHz Yb:KYW dual-crystal regenerative amplifier  

Science Journals Connector (OSTI)

A highly stable Yb:KYW based dual crystal regenerative amplifier is demonstrated, which generates at 1 kHz 6.5-mJ pulses before and up to 4.7-mJ sub-ps pulses after compression with...

Calendron, Anne-Laure; Çankaya, Hüseyin; Kärtner, Franz X

2014-01-01T23:59:59.000Z

178

of Stem Cell Biology and Regenerative Medicine Forum" DateNov 27th  

E-Print Network [OSTI]

-Together ------------------------------------------------------------------------------------------------------------------------------------- Hosted by Center for Stem Cell Biology and Regenerative Medicine ---Information--- Please register with their cell doses having failed to meet the minimum standard. Overall, these facts boosted us to look by utilizing mouse transplantation models a proof of concept that combined multiple units of allogeneic

Miyashita, Yasushi

179

Depolarizing the debate: Can retail wheeling co-exist with integrated resource planning?  

SciTech Connect (OSTI)

Antagonists in the retail wheeling debate share a disgruntlement with the present industry structure and a desire to rely more on competition to achieve savings and efficiencies. But the critical question - is retail electric service a natural monopoly? - must be answered in the negative if retail competition is to be efficient. Only then should one go on to examine how such a regime might be structured. This article offers an approach to retail wheeling that is grounded in principles shared by both sides: economic efficiency, nondiscrimination and fairness to customers and shareholders. The article then turns to the source of both sides` disgruntlement: the industry`s illogical structure. This article discusses four principles: (1) Where retail electric service is a natural monopoly, unconditioned retail wheeling is inefficient; (2) Most arguments for unconditioned retail wheeling substitute a pecuniary interest for the public interest; (3) Efficient retail procurement within a natural retail monopoly must be consistent with an integrated resource plan; (4) As presently framed, the retail wheeling debate does not confront the electric industry`s structural flaws.

Hempling, S.

1994-04-01T23:59:59.000Z

180

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles  

Science Journals Connector (OSTI)

Abstract The cooling of the motor in an in-wheel system is critical to its performance and durability. In the present study, the shape of the channel in the hollow shaft for the oil spray cooling of a high-capacity 35 kW in-wheel motor was optimized, and the thermal performance of the motor was evaluated by numerical analysis and experiments. The thermal flow was analyzed by evaluating the thermal performance of two conventional cooling models of in-wheel motors under conditions of continuous rating base speed. For conventional model #1, in which the cooling oil is stagnant in the lower end of the motor, the maximum temperature of the coil was 221.7 °C. For conventional model #2, in which the cooling oil circulates through the exit and entrance of the housing and jig, the maximum temperature of the coil was 155.4 °C. Both models thus proved to be unsuitable for in-wheel motors because the motor control specifications limit the maximum temperature to 150 °C. We designed and manufactured an enhanced model for in-wheel motors, which we equipped with an optimized channel for the oil spray cooling mode, and evaluated its thermal performance under continuous rating conditions. The maximum temperatures of the coil at the base and maximum speeds, which were set as the design points, were below the motor temperature limit, being 138.1 and 137.8 °C, respectively.

Dong Hyun Lim; Sung Chul Kim

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Electric Drive Vehicle Demonstration and Vehicle Infrastructure...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation 2010 DOE Vehicle Technologies...

182

Next Generation Environmentally Friendly Driving Feedback Systems...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Next Generation Environmentally Friendly Driving Feedback Systems Research and Development Next Generation Environmentally Friendly Driving Feedback Systems Research and...

183

DOE Hydrogen and Fuel Cells Program: Well-to-Wheels Case Studies for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Production Hydrogen Production Hydrogen Delivery Hydrogen Storage Hydrogen Manufacturing Fuel Cells Applications/Technology Validation Safety Codes and Standards Education Basic Research Systems Analysis Analysis Repository H2A Analysis Hydrogen Analysis Resource Center Scenario Analysis Well-to-Wheels Analysis Systems Integration U.S. Department of Energy Search help Home > Systems Analysis > Well-to-Wheels Analysis Printable Version Well-to-Wheels Case Studies for Hydrogen Pathways The ultimate goal is for hydrogen to be produced and delivered utilizing several feedstocks, processing methods, and delivery options at a variety of scales ranging from large central production to very small local (distributed) production, depending on what makes the most economic and logistical sense for a given location. These parameters and the

184

Experimental characterization of mechanical vibrations and acoustical noise generated by defective automotive wheel hub bearings  

Science Journals Connector (OSTI)

Wheel hub bearing faults in passenger cars cause chattering at the corresponding wheel, increase chassis vibration and generate high noise levels inside the car cabin. In this paper a series of in-situ test with defective and healthy wheel hub bearings were conducted. Mechanical vibrations and sound were measured and data were analyzed with a number of signal processing methods in frequency and time-frequency domains. Additionally, a statistical signal processing method was also performed. The results of the various methods are compared and it was found that most of the methods used in this work are well suited for the analysis. Some methods, however, show certain limitations with respect to their informative value and their ability of implementation.

Eduardo Rubio; Juan C. Jáuregui

2012-01-01T23:59:59.000Z

185

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel Inverted Pendulum  

E-Print Network [OSTI]

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel underac- tuated mechanical system: the inertia wheel inverted pendulum. Numerical simulations as well: the ball and beam [9] (where the dynamics of the beam has not been taken into account) and the Planar

Paris-Sud XI, Université de

186

Regenerative Feedback Resonant Circuit to Detect Transient Changes in Electromagnetic Properties of Semi-Insulating Materials  

SciTech Connect (OSTI)

A prototype regenerative feedback resonant circuit has been developed for measuring the transient spectral response due to perturbations in properties of various electromagnetic materials. The circuit can accommodate a variety of cavity resonators, shown here in the 8 GHz range, with passive quality factors (Qstat) as high as 7,000 depending upon material loading. The positive feedback enhanced dynamic quality factors (Qdyn) of resonator/material combinations in the regenerative circuit are on the order of 107 - 108. The theory, design, and implementation of the circuit is discussed along with real-time monitored example measurements of effects due to photon-induced charge carriers in high-resistivity silicon wafers and magnetic-field induced perturbations of yttrium-iron garnet.

Jones, Anthony M.; Kelly, James F.; Severtsen, Ronald H.; McCloy, John S.

2013-08-08T23:59:59.000Z

187

Overmodulation in Current Controlled Drives  

E-Print Network [OSTI]

220 Chapter 5 Overmodulation in Current Controlled Drives 5.1 Introduction The performance of voltage feedforward controlled constant V f PWM-VSI drives is insu cient for most industrial processes performance control methods. Electric traction, el- evators, textile machines, paper and plastic machines

Hava, Ahmet

188

Regenerative thermal oxidizers for VOC and NO{sub x} -- efficiency and cost  

SciTech Connect (OSTI)

Regenerative fume incinerators or thermal oxidizers have a combustion chamber at about 1,600 F. Heat recovery is provided by switching regenerator beds filled with ceramic. Volatile organic compounds, VOC`s, are about 99% removed along with a thermal efficiency of 90 to 95%. Improvements are discussed which reduce fuel costs, reduce investment cost and give better VOC removal. A method of preventing NO{sub x} formation is presented as well as a possible method for removing NO{sub x} from incoming feed gas. Regenerative fume incinerators or regenerative thermal oxidizers have 3 possible improvements. (1) Add the required fuel to the incoming gas to nearly eliminate NO{sub x} generation while improving thermal efficiency. (2) Remove NO{sub x} from the incoming gas by a new modification of the Exxon Thermal DeNO{sub x} process. (3) Use a new 4-way valve for 1 or 2-bed regenerators to cut investment and improve destruction efficiency.

Houston, R. [Houston Consulting, Hendersonville, NC (United States)

1995-12-31T23:59:59.000Z

189

Chapter Seven - Variable speed drives  

Science Journals Connector (OSTI)

Publisher Summary The electromechanical controllers are a kind of variable speed drives (VSDs) that are obsolete but are still in use because when a motor and a drive is combined, they become a power drive system (PDS). There are two ways of varying the speed of an induction motor, either by varying the motor slip or by varying the supply frequency. The preferred practice for electrical speed variation is to change the supply frequency with a variable frequency drive (VFD). Many other designs also have been developed. However, except the specialized applications, few are still in operation. A number of motor and drive manufacturers are now producing the integrated motor/VFD units. These units consist of a motor and a specially designed VFD, produced as a single package, with the VFD unit mounted variously on the top, side, or end of the motor.

Europump; Hydraulic Institute

2005-01-01T23:59:59.000Z

190

ION 2006, Fort Worth TX, 26-29 September 2006 1 GPS/INS/G Sensors/Yaw Rate Sensor/Wheel  

E-Print Network [OSTI]

of four integration strategies, namely a GPS/INS integrated system, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with two non- holonomic constraints, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with the removal of the lateral constraint

Calgary, University of

191

Operations with the new FUSE observatory: three-axis control with one reaction wheel  

E-Print Network [OSTI]

control system, particularly those of gyroscopes and reaction wheels, have made science operations in all three axes. Jitter values of no more than ±1 arcsecond in pitch, ±10 arcsecond in yaw, and ±1-516-8503; fax 410-516-5494; http://fuse.pha.jhu.edu #12;The FUSE Attitude Control System (ACS) contains two sets

192

Omnidirectional locomotion and traction control of the wheel-driven, wall-climbing robot, cromsci  

Science Journals Connector (OSTI)

Safe and cost-efficient inspection of large concrete buildings is a great challenge for mobile robots. This paper presents the locomotion system of the climbing robot, Cromsci, which uses three steerable standard wheels and negative pressure ... Keywords: Control of robotic systems, Force control, Mobile robots, Novel applications of robotics, Service robots

D. Schmidt; C. Hillenbrand; K. Berns

2011-12-01T23:59:59.000Z

193

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J applications. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where and static force Jacobians; normal forces. JACOBIAN DES ROUES MECANUM DU PLATFORME DE MOTION ATLAS DANS LES

Hayes, John

194

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where orienting force Jacobians; normal forces. MATRICE JACOBIENNE DES ROUES MECANUM SIMULATOUR DE MOUVEMENT ATLAS DANS

Hayes, John

195

Continuous Control Primitive Trajectory Generation and Optimal Motion Splines for All-Wheel Steering Mobile  

E-Print Network [OSTI]

on the Rocky 8 rover platform, where parameterized linear velocity, curvature, and path heading controls of the wheels are steerable (e.g. Rocky 8, shown), the body can rotate about any point in the local tangent has dealt with finding obstacle-free paths subject to nonholnomic constraints assuming flat terrain

Kelly, Alonzo

196

TEMPERATURE-DEPENDENT RAMAN SPECTROSCOPY OF FULLERENE AND CARBORANE NANOCAR WHEELS  

E-Print Network [OSTI]

into a temperature difference. We can control the input voltage and current by using an external power supply to control temperature. The red and black wires are connected to the power supply. The yellow wireTEMPERATURE-DEPENDENT RAMAN SPECTROSCOPY OF FULLERENE AND CARBORANE NANOCAR WHEELS B. Shih1,2 , C

Mellor-Crummey, John

197

Driving Green com | Open Energy Information  

Open Energy Info (EERE)

Driving Green com Jump to: navigation, search Name: Driving Green.com Place: Melbourne, Florida Zip: 32904 Sector: Vehicles Product: Driving green.com is a website that allows...

198

ARM - SGP Rural Driving Hazards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rural Driving Hazards Rural Driving Hazards SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts SGP Rural Driving Hazards The rural location of the Southern Great Plains (SGP) site facilities requires that visitors travel on unpaved, dirt and gravel, roads. Visitors should be aware of the driving hazards this presents by taking the following precautions: Proceed cautiously: Many rural roads have unmarked and blind intersections. Slow down: Sanded and gravel raods can cause a vehicle to swerve. Maintain a safe following distance: During the dry season, vehicles

199

Induction-drive magnetohydrodynamic propulsion  

Science Journals Connector (OSTI)

The use of magnetohydrodynamic propulsion for marine applications is reviewed with emphasis on induction- ... . Comparisons are made with direct-drive MHD propulsion systems. Application to pumps for hazardous fl...

D. L. Mitchell; D. U. Gubser

1993-08-01T23:59:59.000Z

200

Adjustable Speed Drive Industrial Applications  

E-Print Network [OSTI]

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost...

Poole, J. N.

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Electric Drive Status and Challenges  

Broader source: Energy.gov [DOE]

Presentation given by technical manager Susan Rogers at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

202

Grand Challenge Portfolio: Driving Innovations in Industrial...  

Broader source: Energy.gov (indexed) [DOE]

Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

203

Advanced Electric Drive Vehicle Education Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Electric Drive Vehicle Education Program Advanced Electric Drive Vehicle Education Program 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer...

204

Advanced Electric Drive Vehicles | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt039schwendeman2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles Advanced Electric Drive Vehicles Energy & Manufacturing Workforce...

205

Integrated Biogeochemical and Hydrologic Processes Driving Arsenic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biogeochemical and Hydrologic Processes Driving Arsenic Release from Shallow Sediments to Groundwaters of the Mekong Integrated Biogeochemical and Hydrologic Processes Driving...

206

Integrated Modular Propulsion and Regenerative Electro-energy Storage System (IMPRESS) for small satellites  

SciTech Connect (OSTI)

The IMPRESS is a significant advancement in space system technology as it is able to operate alternately as a fuel cell to produce electrical power from stored hydrogen and oxygen and as a water electrolyzer using electrical power to produce hydrogen and oxygen from stored water. The electrolysis of a controllable fraction of stored water can provide high Isp rocket propellants on demand. The heart of the IMPRESS is the Unitized Regenerative Fuel Cell (URFC), which produces power and electrolytically regenerates its reactants using a single stack of reversible cells. This integrated approach has several significant advantages over separate (battery) power and propulsion systems.

Mitlitsky, F. [Lawrence Livermore National Lab., CA (United States); de Groot, W. [Nyma, Inc., Brook Park, OH (United States); Butler, L.; McElroy, J. [United Technologies Corp., Windsor Locks, CT (United States). Hamilton Standard Div.

1996-09-01T23:59:59.000Z

207

warned that the world was asleep at the wheel. Back then, only two countries had plans to test  

E-Print Network [OSTI]

warned that the world was asleep at the wheel. Back then, only two countries had plans to test in a hospital examin- ing room in Rochester, New York. Pressing a ball of cotton into the crook of her elbow

Cai, Long

208

Washboard Road: The Dynamics of Granular Ripples Formed by Rolling Wheels Nicolas Taberlet,1,2,* Stephen W. Morris,3  

E-Print Network [OSTI]

surface under tangential stress is reminiscent of other sorts of wind- and water-driven ripples [2 inclination remained confined between 70 and 90 , so that the wheel motion was almost vertic

McElwaine, Jim

209

CLEAN HYDROGEN TECHNOLOGY FOR 3-WHEEL TRANSPORTATION IN INDIA  

SciTech Connect (OSTI)

Hydrogen is a clean burning, non-polluting transportation fuel. It is also a renewable energy carrier that can be produced from non-fossil fuel resources such as solar, wind and biomass. Utilizing hydrogen as an alternative fuel for vehicles will diversify the resources of energy, and reduce dependence on oil in the transportation sector. Additionally, clean burning hydrogen fuel will also alleviate air pollution that is a very severe problem in many parts of world, especially major metropolitan areas in developing countries, such as India and China. In our efforts to foster international collaborations in the research, development, and demonstration of hydrogen technologies, through a USAID/DOE cost-shared project, Energy Conversion Devices, Inc.,(www.ovonic.com) a leading materials and alternative energy company, in collaboration with Bajaj Auto Limited, India's largest three-wheeler taxi manufacturer, has successfully developed and demonstrated prototype hydrogen ICE three-wheelers in the United States and India. ECD's proprietary Ovonic solid-state hydrogen storage technology is utilized on-board to provide a means of compact, low pressure, and safe hydrogen fuel. These prototype hydrogen three-wheelers have demonstrated comparable performance to the original CNG version of the vehicle, achieving a driving range of 130 km. The hydrogen storage system capable of storing 1 kg hydrogen can be refilled to 80% of its capacity in about 15 minutes at a pressure of 300 psi. The prototype vehicles developed under this project have been showcased and made available for test rides to the public at exhibits such as the 16th NHA annual meeting in April 2005, Washington, DC, and the SIAM (Society of Indian Automotive Manufacturers) annual conference in August 2005, New Delhi, India. Passengers have included members of the automotive industry, founders of both ECD and Bajaj, members of the World Bank, the Indian Union Minister for Finance, the President of the Asia Development Bank, members of USAID, USDOE and many other individuals, all of whom have had praise for the vehicle and the technology. The progress made through this phase I work and the importance of hydrogen three-wheelers has also resulted in extensive press coverage by the news media around the world.

Krishna Sapru

2005-11-15T23:59:59.000Z

210

ESS 2012 Peer Review - Novel Regenerative Fuel Cells based on Anion Exchange Membranes - Katherine Ayers, Proton Onsite  

Broader source: Energy.gov (indexed) [DOE]

l l R ti F l C ll b d A i E h M b f Novel Regenerative Fuel Cells based on Anion Exchange Membranes for Novel Regenerative Fuel Cells based on Anion Exchange Membranes for g g Affordable Renewable Energy Storage Affordable Renewable Energy Storage Affordable Renewable Energy Storage PI: Dr Katherine Ayers Proton Energy Systems kayers@protononsite com PI: Dr. Katherine Ayers, Proton Energy Systems, kayers@protononsite.com y , gy y , y @p A h Key Challenges and Progress Approach Key Challenges and Progress Approach Key Challenges and Progress pp N PGM t l t ( l t l ) Fuel Cell Durability: Non-PGM catalysts (electrolyzer) * Leverage Proton experience in large scale Fuel Cell Durability: o G cata ysts (e ect o y e ) * Leverage Proton experience in large scale Anode flooding and cathode * Translation from RDE to cell results electrolysis and regenerative fuel

211

Study on The Effect of Regenerative System on Power Type Relative Internal Efficiency of Nuclear Steam Turbine  

Science Journals Connector (OSTI)

Nuclear steam turbine use wet steam as working medium, which is unable to determine the enthalpy drop type relative internal efficiency through exhaust enthalpy of steam, but the power type relative internal efficiency avoids this question. This paper introduced the calculate method of power type relative internal efficience, and then took a 900MW nuclear steam turbine for example, calculated the power type relative internal efficiency when the factors of regenerative system are changed. The result shows that when the factors of regenerative system are changed in a large range, the power type relative internal efficiency is nearly changeless, so the effect of regenerative system on relative internal efficiency can be neglected. At last, the independence between relative internal efficiency and ideal cycle heat efficiency is calculated and analyzed.

Yong Li; Chao Wang

2012-01-01T23:59:59.000Z

212

The U.S. Army's Vehicle Intelligence Program (AVIP): The Future of Manned, Wheeled Tactical Vehicles  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vehicle The U.S. Army's Vehicle Vehicle The U.S. Army's Vehicle Intelligence Program (AVIP): Intelligence Program (AVIP): The Future of Manned, Wheeled The Future of Manned, Wheeled Tactical Vehicles Tactical Vehicles H. E. (Bill) Knéé Oak Ridge National Laboratory National Transportation Research Center 2360 Cherahala Blvd. Knoxville, Tennessee 37932 USA Phone: (865) 946-1300 Fax: (865) 946-1314 E-mail: kneehe@ornl.gov David J. Gorsich U.S. Army Tank-Automotive and Armaments Command AMSTA-TR-N, Warren, Michigan 49397-5000 USA Phone: (810) 574-7413 Fax: (810) 574-6996 E-mail: GorsichD@tacom.army.mil IV2001 IEEE Intelligent Vehicles Symposium Tokyo, Japan http://www.ornl.gov/ORNLReview/v33_3_00/features.htm 1. Propulsion, Vehicle and Power Systems 2. Information and Decision Support Systems 3. Materials, Structures, and Mechanical Systems

213

Energy Wheel Performance and Optimization Opportunities for SDVAV AHU's In a Hot & Humid Climate  

E-Print Network [OSTI]

0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 W h e e l E f f e c t i v e n e s s OAT, oF Eff.-Sensible Eff.-Latent Eff.-Total Results (Cont.) ? Effectiveness... vs. Wheel VFD Speed 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 20 30 40 50 60 70 80 90 100 W h e e l E f f e c t i v e n e s s Wheel VFD Speed, % (100%=60 HZ) Eff. Sensible Eff.Latent Eff.Total 8 Results (field...

Zhao, J.; Wang, L.; Watt, J.

2012-01-01T23:59:59.000Z

214

Lyapunov function-based non-linear control for two-wheeled mobile robots  

Science Journals Connector (OSTI)

This article presents a non-linear feedback control framework for two-wheeled mobile robots. The approach uses a constructive Lyapunov function which allows the formulation of a control law with asymptotic stability of the equilibrium point of the system and a computable stability region. The dynamic equations are simplified through normalisation and partial feedback linearisation. The latter allows linearisation of only the actuated coordinate. Description of the control law is complemented by the stability analysis of the closed loop dynamics of the system. The effectiveness of the method has been illustrated by its good performance and less control demand through simulations conducted for two control tasks: upright position stabilisation and velocity tracking for a statically unstable two wheeled mobile robot.

Zareena Kausar; Karl Stol; Nitish Patel

2013-01-01T23:59:59.000Z

215

Distribution Drive | Open Energy Information  

Open Energy Info (EERE)

Drive Drive Jump to: navigation, search Name Distribution Drive Place Dallas, Texas Zip 75205 Product Biodiesel fuel distributor. Coordinates 32.778155°, -96.795404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.778155,"lon":-96.795404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

216

Kepler White Paper: Asteroseismology of Solar-Like Oscillators in a 2-Wheel Mission  

E-Print Network [OSTI]

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimi...

Chaplin, W J; Christensen-Dalsgaard, J; Gilliland, R L; Kawaler, S D; Basu, S; De Ridder, J; Huber, D; Arentoft, T; Schou, J; Garcia, R A; Metcalfe, T S; Brogaard, K; Campante, T L; Elsworth, Y; Miglio, A; Appourchaux, T; Bedding, T R; Hekker, S; Houdek, G; Karoff, C; Molenda-Zakowicz, J; Monteiro, M J P F G; Aguirre, V Silva; Stello, D; Ball, W; Beck, P G; Birch, A C; Buzasi, D L; Casagrande, L; Cellier, T; Corsaro, E; Creevey, O L; Davies, G R; Deheuvels, S; Dogan, G; Gizon, L; Grundahl, F; Guzik, J; Handberg, R; Jimenez, A; Kallinger, T; Lund, M N; Lundkvist, M; Mathis, S; Mathur, S; Mazumdar, A; Mosser, B; Neiner, C; Nielsen, M B; Palle, P L; Pinsonneault, M H; Salabert, D; Serenelli, A M; Shunker, H; White, T R

2013-01-01T23:59:59.000Z

217

Stop/Start: Overview  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

regenerative braking, energy from the wheels turns the electric generator, creating electricity. Using energy from the wheels to turn the generator slows the vehicle. Go to next...

218

Laser Direct Drive: Scientific Advances,  

E-Print Network [OSTI]

· Simpler targets & physics · Predict Fusion Class Gains (> 140) at lower laser energy (500 kJ - 1 MJ) #12;7 KrF lasers have advantages for fusion energy PHYSICS Deeper UV (248 nm vs 351 for glass): -- Greater · chamber #12;9 Gain for Fusion Energy New Direct Drive Designs: Power plant class gains, much smaller laser

219

Anomalous-viscosity current drive  

DOE Patents [OSTI]

The present invention relates to a method and apparatus for maintaining a steady-state current for magnetically confining the plasma in a toroidal magnetic confinement device using anomalous viscosity current drive. A second aspect of this invention relates to an apparatus and method for the start-up of a magnetically confined toroidal plasma.

Stix, T.H.; Ono, M.

1986-04-25T23:59:59.000Z

220

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnership Plan Partnership Plan March 2013 U.S. DRIVE Partnership Plan Table of Contents Foreword ....................................................................................................................................................... 2 Definition ...................................................................................................................................................... 3 Partners ......................................................................................................................................................... 3 U.S. DRIVE Vision ........................................................................................................................................... 3 U.S. DRIVE Mission ........................................................................................................................................ 4

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Development of an ``intelligent grinding wheel`` for in-process monitoring of ceramic grinding. Semi-annual report {number_sign}4  

SciTech Connect (OSTI)

The overall objective of this project is to develop sensor-integrated ``intelligent`` diamond wheels for grinding of ceramics. Such wheels will be ``smart`` enough to monitor and supervise both the wheel preparation and grinding processes without the need to instrument the machine tool. Intelligent wheels will utilize re-useable cores integrated with sensors: to measure the acoustic emission (AE) and grinding force. Signals from the sensors will be transmitted from a rotating wheel to a receiver by telemetry. Wheels will be ``trained`` to recognize distinct characteristics associated with truing, dressing and grinding. This overall project is divided into six tasks as follows: (1) development of miniaturized sensors and data transmission system; (2) wheel design and sensor configuration; (3) calibration of the sensor integrated wheel; (4) training of the intelligent wheel; (5) grinding tests; and (6) prototype demonstration. The technical progress is summarized in this report according to the tasks. All activity during this period has been concerned with the first two interrelated tasks, which need to be completed before undertaking the remaining tasks.

Malkin, S.; Gao, R.; Guo, C.; Varghese, B.; Pathare, S.

1998-09-30T23:59:59.000Z

222

Study of Power Grid Connection with an Unstable Source from Elevator Energy Regenerative Unit (EERU)  

Science Journals Connector (OSTI)

Abstract This paper presents a study of power grid connection with an unstable source from elevator energy regenerative unit (EERU). The investigated system used a Permanent Magnet Synchronous Motor (PMSM). The EERU is installed for this system to generate electricity according to the generative mode of the elevator which delivers power to the grid as an unstable power source. To meet standard specifications in term of power quality and safety for grid connection, the phase angle and the amplitude as well as the frequency of the grid voltage are considered for grid connection. Phase lock loop (PLL) algorithm is therefore very important and selected for grid synchronization. The study is done by simulation using Matlab/Simulink program. The simulation used phase lock loop to synchronize between two systems. The results of this simulation will lead to a proper design of the grid connection with EERU as an unstable power source.

A. Noppakant; B. Plangklang; Y. Paraken

2014-01-01T23:59:59.000Z

223

Stripping of organic compounds from wastewater as an auxiliary fuel of regenerative thermal oxidizer  

Science Journals Connector (OSTI)

Organic solvents with different volatilities are widely used in various processes and generate air and water pollution problems. In the cleaning processes of electronics industries, most volatile organic compounds (VOCs) are vented to air pollution control devices while most non-volatile organic solvents dissolve in the cleaning water and become the major sources of COD in wastewater. Discharging a high-COD wastewater stream to wastewater treatment facility often disturbs the treatment performance. A pretreatment of the high-COD wastewater is therefore highly desirable. This study used a packed-bed stripping tower in combination with a regenerative thermal oxidizer to remove the COD in the wastewater from a printed circuit board manufacturing process and to utilize the stripped organic compounds as the auxiliary fuel of the RTO. The experimental results showed that up to 45% of the COD could be removed and 66% of the RTO fuel could be saved by the combined treatment system.

Meng-Wen Chang; Jia-Ming Chern

2009-01-01T23:59:59.000Z

224

Granular gases under extreme driving  

E-Print Network [OSTI]

We study inelastic gases in two dimensions using event-driven molecular dynamics simulations. Our focus is the nature of the stationary state attained by rare injection of large amounts of energy to balance the dissipation due to collisions. We find that under such extreme driving, with the injection rate much smaller than the collision rate, the velocity distribution has a power-law high energy tail. The numerically measured exponent characterizing this tail is in excellent agreement with predictions of kinetic theory over a wide range of system parameters. We conclude that driving by rare but powerful energy injection leads to a well-mixed gas and constitutes an alternative mechanism for agitating granular matter. In this distinct nonequilibrium steady-state, energy cascades from large to small scales. Our simulations also show that when the injection rate is comparable with the collision rate, the velocity distribution has a stretched exponential tail.

W. Kang; J. Machta; E. Ben-Naim

2010-02-04T23:59:59.000Z

225

Optimization of condensing gas drive  

E-Print Network [OSTI]

- cal, undersaturated reservoir with gas being injected into the crest and oil being produced from the base of the structure. Fractional oil re- covery at gas breakthrough proved to be less sensitive to changes in oil withdrawal rates as the gas... injection pressure was increased. The validity of the model was established by accurately simulating several low pressure gas drives conducted in the laboratory. Oil recoveries at gas breakthrough using the model compared closely with those recoveries...

Lofton, Larry Keith

2012-06-07T23:59:59.000Z

226

Current drive operation in a tokamak  

Science Journals Connector (OSTI)

Three modes of current drive operation in a tokamak — continuous, cyclic, and rfinitiated-are ... A model design of a saturable iron core tokamak for current drive experiments is also presented.

O. Mitarai; A. Hirose

1985-12-01T23:59:59.000Z

227

What Drives the Brewer–Dobson Circulation?  

Science Journals Connector (OSTI)

Recent studies have revealed strong interactions between resolved Rossby wave and parameterized gravity wave driving in stratosphere-resolving atmospheric models. Perturbations to the parameterized wave driving are often compensated by opposite ...

Naftali Y. Cohen; Edwin P. Gerber; Oliver Bühler

2014-10-01T23:59:59.000Z

228

Vehicle Technologies Office: U.S. DRIVE  

Broader source: Energy.gov [DOE]

U.S. DRIVE stands for Driving Research and Innovation for Vehicle efficiency and Energy sustainability. It is a non-binding and voluntary government-industry partnership focused on advanced...

229

October Blood Drive Announcement | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American Red Cross Blood Drive Scheduled for Oct. 31 The American Red Cross Blood Drive will take place Friday, October 31st from 10 a.m.-4 p.m. in CEBAF Center, Room F113. New and...

230

Consider Steam Turbine Drives for Rotating Equipment  

Broader source: Energy.gov [DOE]

This tip sheet outlines the benefits of steam turbine drives for rotating equipment as part of optimized steam systems.

231

Indianapolis Offers a Lesson on Driving Demand  

Broader source: Energy.gov [DOE]

Successful program managers know that understanding the factors that drive homeowners to make upgrades is critical to the widespread adoption of energy efficiency. What better place to learn about driving demand for upgrades than in Indianapolis, America's most famous driving city?

232

DOE Hydrogen and Fuel Cells Program Record 5012a: Well-to-Wheels Analyses for Solar and Wind Hydrogen Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Hydrogen and Fuel Cells Program Record DOE Hydrogen and Fuel Cells Program Record Record #: 5012a Date: December 21, 2005 Title: Well-to-Wheels Analyses for Solar & Wind Hydrogen Production Originator: Roxanne Garland Approved by: JoAnn Milliken Date: January 6, 2006 Item: This record explains the basis for the differences between the analyses of well-to-wheels energy use and greenhouse gas emissions conducted via Argonne National Laboratory's GREET Model, cited in the U.S. Department of Energy's Solar and Wind Technologies for Hydrogen Production Report to Congress, 1 and those conducted by the National Research Council, cited in the report The Hydrogen Economy: Opportunities, Costs, Barriers, and R&D Needs. 2 Well-to-Wheels Energy Use and Greenhouse Gas Emissions - Argonne National

233

IEEE Int'l Conf. on Robotics and Automation (ICRA), May 14-18, 2012 Planning in High-dimensional Shape Space for a Single-wheeled  

E-Print Network [OSTI]

on a single ball. Achieving desired motions in position space is a challenging task for such systems due mobile robot that moves on a single ball. The single, spherical wheel enables the robot to achieve omni-dimensional Shape Space for a Single-wheeled Balancing Mobile Robot with Arms Umashankar Nagarajan, Byungjun Kim

234

Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems- A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions  

Broader source: Energy.gov [DOE]

A complete vehicle fuel-cycle analysis, commonly called a well-to-wheels (WTW) analysis that examines the use and emissions associated with fuel production (or well-to-tank [WTT]) activities and energy use and emissions associated with vehicle operation (or tank-to-wheels [TTW]) activities.

235

An electromagnetic and thermodynamic lumped parameter model of an explosively driven regenerative magnetohydrodynamic generator  

SciTech Connect (OSTI)

The objective of this research is to develop a simple, yet accurate, lumped parameter mathematical model for an explosively driven magnetohydrodynamic generator that can predict the pulse power variables of voltage and current from startup through regenerative operation. The inputs to the model will be the plasma properties entering the generator as predicted by the explosive shock model of Reference [1]. The strategy used was to simplify electromagnetic and thermodynamic three dimensional effects into a zero dimensional model. The model will provide a convenient tool for researchers to optimize designs to be used in pulse power applications. The model is validated using experimental data of Reference [1]. An overview of the operation of the explosively driven generator is first presented. Then a simplified electrical circuit model that describes basic performance of the device is developed. Then a lumped parameter model that incorporates the coupled electromagnetic and thermodynamic effects that govern generator performance is described and developed. The model is based on fundamental physical principles and parameters that were either obtained directly from design data or estimated from experimental data. The model was used to obtain parameter sensitivities and predict beyond the limits observed in the experiments to the levels desired by the potential Department of Defense sponsors. The model identifies process limitations that provide direction for future research.

Morrison, J.L.

1992-12-01T23:59:59.000Z

236

Regeneratively cooled coal combustor/gasifier with integral dry ash removal  

DOE Patents [OSTI]

A coal combustor/gasifier is disclosed which produces a low or medium combustion gas for further combustion in modified oil or gas fired furnaces or boilers. Two concentric shells define a combustion volume within the inner shell and a plenum between them through which combustion air flows to provide regenerative cooling of the inner shell for dry ash operation. A fuel flow and a combustion air flow having opposed swirls are mixed and burned in a mixing-combustion portion of the combustion volume and the ash laden combustion products flow with a residual swirl into an ash separation region. The ash is cooled below the fusion temperature and is moved to the wall by centrifugal force where it is entrained in the cool wall boundary layer. The boundary layer is stabilized against ash re-entrainment as it is moved to an ash removal annulus by a flow of air from the plenum through slots in the inner shell, and by suction on an ash removal skimmer slot.

Beaufrere, Albert H. (Huntington, NY)

1983-10-04T23:59:59.000Z

237

Numerical evaluation of the energetic performances of structured and random packed beds in regenerative thermal oxidizers  

Science Journals Connector (OSTI)

Regenerative thermal oxidizers (RTO) can be conveniently used to control volatile organic components (VOC) emissions, because of their thermal efficiency and cost effectiveness. In the RTO technology, beds of inert material are used in order to heat the polluted air by cooling burnt gases, through a sequence of cyclic operations which cut the fuel requirements. A computational 1D unsteady model, able to account for both structured and random packed bed regenerators, is developed and applied to realistic plant conditions. Process thermal efficiency and gas pressure drop are calculated as functions of the system geometry and operating parameters. The code can be usefully employed in the analysis and design of RTO systems and in order to choose the more suitable type of regenerator, structured or random packed bed (even considering various particle shapes). Energetic performances of both random and structured regenerators were compared, showing that the first ones exhibit a little higher thermal efficiency but also an elevated pressure drop, at a same value of exchange surface per unit volume of the bed. Random packed bed regenerators resulted less attractive from the energetic point of view and their usage is advisable if their lower cost satisfy economical requirements.

Mario Amelio; Pietropaolo Morrone

2007-01-01T23:59:59.000Z

238

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal Desai, Brenden Keyes,  

E-Print Network [OSTI]

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal was built on top of the system we have been developing for urban search and rescue (USAR) research. The system includes new behaviors and behavior sequencing, vision algorithms and sensor processing algorithms

Yanco, Holly A.

239

FxLMS method for suppressing in-wheel switched reluctance motor vertical force based on vehicle active suspension system  

Science Journals Connector (OSTI)

The vibration of SRM obtains less attention for in-wheel motor applications according to the present research works. In this paper, the vertical component of SRM unbalanced radial force, which is named as SRM vertical force, is taken into account in ...

Yan-yang Wang, Yi-nong Li, Wei Sun, Chao Yang, Guang-hui Xu

2014-01-01T23:59:59.000Z

240

February 7, 2009 "Friends come first, mathematics after." Raoul once said, as he smiled and wheeled his bicycle out  

E-Print Network [OSTI]

and wheeled his bicycle out of his office, and down the corridor to meet a visiting friend of his in a local coffee shop, his worn golden-brown portfolio balanced on his bicycle seat. Raoul Bott was a wonderful: as he smiled, made his way down a corridor, looked for his lost gloves, walked his bicycle

Mazur, Barry

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Vehicle Technologies Office: U.S. DRIVE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

U.S. DRIVE U.S. DRIVE Logo for U.S. DRIVE - Driving Research and Innovation for Vehicle efficiency and Energy sustainability. U.S. DRIVE stands for Driving Research and Innovation for Vehicle efficiency and Energy sustainability. It is a non-binding and voluntary government-industry partnership focused on advanced automotive and related infrastructure technology research and development (R&D). Specifically, the Partnership is a forum for pre-competitive technical information exchange among partners to discuss R&D needs, develop joint goals and technology roadmaps, and evaluate R&D progress for a broad range of technical areas. By providing a framework for frequent and regular interaction among technical experts in a common area of expertise, the Partnership -

242

Electric vehicle drive train with contactor protection  

DOE Patents [OSTI]

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor.

Konrad, Charles E. (Roanoke, VA); Benson, Ralph A. (Roanoke, VA)

1994-01-01T23:59:59.000Z

243

DOE Drives Big Data Push  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Volume 9 Issue 2 2 Volume 9 Issue 2 From YAGS to Planetary Biology . . . . . . . . . . . . . . . 2 DOE Drives Big Data Push . . . . . . . . . . . . . . . . . . . . 3 Sweating Small Scale Genomics . . . . . . . . . . . . . . . 6 The Future of the DOE JGI . . . . . . . . . . . . . . . . . . . . 7 Save the Date for Meeting 8 . . . . . . . . . . . . . . . . . . . 8 also in this issue With a record 488 genomics researchers and bioinformaticians sitting in the Marriott Walnut Creek ballroom, New York Times science writer Carl Zimmer opened the DOE Joint Genome Institute's 7th Annual Genomics of Energy & Environment Meeting on March 20, 2012. Sharing his thoughts about being "On the Genome Beat," he informed the audience that he was worn down by seeing news about scientists successfully sequencing yet another genome sequence, and that "maybe some genomes shouldn't be written about." Zimmer's words engaged the audience in a discussion that

244

Current Drive in Recombining Plasma  

SciTech Connect (OSTI)

The Langevin equations describing the average collisional dynamics of suprathermal particles in nonstationary plasma remarkably admit an exact analytical solution in the case of recombining plasma. The current density produced by arbitrary particle fluxes is derived including the effect of charge recombination. Since recombination has the effect of lowering the charge density of the plasma, thus reducing the charged particle collisional frequencies, the evolution of the current density can be modified substantially compared to plasma with fixed charge density. The current drive efficiency is derived and optimized for discrete and continuous pulses of current, leading to the discovery of a nonzero "residual" current density that persists indefinitely under certain conditions, a feature not present in stationary plasmas.

P.F. Schmit and N.J. Fisch

2012-05-15T23:59:59.000Z

245

Improving Motor and Drive System Performance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

drives. Energy-Efficient Electric Motors and Their Applications, 2nd Edition Author: Jordan, H.E. Publisher: Springer Description: Evaluates the energy savings potential of...

246

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt034ferdowsi2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

247

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Meeting arravt034tiferdowsi2012o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

248

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Evaluation arravt034tiferdowsi2011p.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

249

Advanced Electric Drive Vehicle Education Program  

Broader source: Energy.gov (indexed) [DOE]

Training Consortium (NAFTC), together with its partners, will develop an Advanced Electric Drive Vehicle Education Program that will help accelerate mass market introduction...

250

Electric Drive Vehicle Infrastructure Deployment | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Infrastructure Deployment Electric Drive Vehicle Infrastructure Deployment 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

251

Cone Drive Operations Inc | Open Energy Information  

Open Energy Info (EERE)

Cone Drive Operations Inc Place: Traverse City, Michigan Zip: 49684 Sector: Solar Product: US-based manufacturers of double enveloping worm gear technology. The company supplies...

252

Marketing & Driving Demand: Social Media Tools & Strategies ...  

Broader source: Energy.gov (indexed) [DOE]

Demand: Social Media Tools & Strategies - January 16, 2011 Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 January 16, 2011 Conference Call...

253

Marketing & Driving Demand Collaborative - Social Media Tools...  

Broader source: Energy.gov (indexed) [DOE]

Demand Collaborative - Social Media Tools & Strategies Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Presentation slides from the BetterBuildings...

254

Collaboration drives achievement in protein structure research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AlumniLink November 2014 Collaboration drives achievement in protein structure research Alumni Link: Opportunities, News and Resources for Former Employees Latest...

255

Design and control of multimodal single-legged vehicles with variable geometry reaction wheel arrays  

E-Print Network [OSTI]

of the Mitsubishi PA-10 robot arm harmonic drive system,”leg and arms stems directly from the design of the robot;Arm Suspension Mechanism for an Underactuated Single Legged Hopping Robot.

Schmidt-Wetekam, Christopher

2011-01-01T23:59:59.000Z

256

Performance Study of ScepterTM Metal Bond Diamond Grinding Wheel  

SciTech Connect (OSTI)

Advanced ceramics are attractive for many applications in the transportation, energy, military, and industrial markets because they possess properties of high-temperature durability, corrosion resistance, strength, hardness, stiffness, and wear resistance. Unfortunately, these same properties make advanced ceramics more difficult to machine than traditional materials. The reliability and manufacturing costs of advanced ceramic components are significant concerns that must be overcome. Nevertheless, the use of advanced ceramic materials is expected to increase dramatically in new transportation systems in response to more stringent energy conservation and pollution reduction requirements. This study discusses the goals, commercialization plans, phased development, scale-up, testing, and external verification of performance of the innovative grinding wheel that evolved from the project.

Denison, S.K.; Licht, R.W.; McSpadden, S.B., Jr.; Parten, R.J.; Picone, J.W.; Shelton, J.E.

1999-06-17T23:59:59.000Z

257

Parameter analysis and design framework for magnetic adhesion wall climbing wheeled robot  

Science Journals Connector (OSTI)

Some robots need to climb ferromagnetic walls for performing important inspections and evaluations of the material properties of these walls. This paper aims to establish a design framework for magnetically adhering wheeled robots having magnets attached to the base of the robot. The different design parameters influencing the magnetic adhesion include the geometry of the flux concentrator, the variation of the air gap on adhesion and climbing performance in addition to various types of materials for magnetic flux concentration. These parameters shaping adhesion behaviour are simulated numerically using magnetostatic analysis in ANSYS Finite Elements Method (FEM) software. The results are evaluated and a set of rules and procedures are created as a framework that will enable a more efficient design and construction of this type of robots.

Salman Hussain; Tariq Sattar; Ener Salinas

2012-01-01T23:59:59.000Z

258

Power production from a moderate temperature geothermal resource with regenerative Organic Rankine Cycles  

Science Journals Connector (OSTI)

Much remains to be done in binary geothermal power plant technology, especially for exploiting low-enthalpy resources. Due to the great variability of available resources (temperature, pressure, chemical composition), it is really difficult to “standardize the technology”.The problem involves many different variables: working fluid selection, heat recovery system definition, heat transfer surfaces sizing and auxiliary systems consumption. Electricity generation from geothermal resources is convenient if temperature of geothermal resources is higher than 130 °C. Extension of binary power technology to use low-temperature geothermal resources has received much attention in the last years. This paper analyzes and discusses the exploitation of low temperature, water-dominated geothermal fields with a specific attention to regenerative Organic Rankine Cycles (ORC). The geothermal fluid inlet temperatures considered are in the 100–130 °C range, while the return temperature of the brine is assumed to be between 70 and 100 °C. The performances of different configurations, two basic cycle configurations and two recuperated cycles are analyzed and compared using dry organic fluids as the working fluids. The dry organic fluids for this study are R134a, isobutane, n-pentane and R245fa. Effects of the operating parameters such as turbine inlet temperature and pressure on the thermal efficiency, exergy destruction rate and Second Law efficiency are evaluated. The possible advantages of recuperated configurations in comparison with basic configurations are analyzed, showing that in a lot of cases the advantage in terms of performance increase is minimal but significant reductions in cooling systems surface area can be obtained (up to 20%).

Alessandro Franco

2011-01-01T23:59:59.000Z

259

Regenerative fuel cells for High Altitude Long Endurance Solar Powered Aircraft  

SciTech Connect (OSTI)

High Altitude Long Endurance (HALE) unmanned missions appear to be feasible using a lightweight, high efficiency, span-loaded, Solar Powered Aircraft (SPA) which includes a Regenerative Fuel Cell (RFC) system and novel tankage for energy storage. An existing flightworthy electric powered flying wing design was modified to incorporate present and near-term technologies in energy storage, power electronics, aerodynamics, and guidance and control in order to design philosophy was to work with vendors to identify affordable near-term technological opportunities that could be applied to existing designs in order to reduce weight, increase reliability, and maintain adequate efficiency of components for delivery within 18 months. The energy storage subsystem for a HALE SPA is a key driver for the entire vehicle because it can represent up to half of the vehicle weight and most missions of interest require the specific energy to be considerably higher than 200 W-hr/kg for many cycles. This stringent specific energy requirement precludes the use of rechargeable batteries or flywheels and suggests examination of various RFC designs. An RFC system using lightweight tankage, a single fuel cell (FC) stack, and a single electrolyzer (EC) stack separated by the length of a spar segment (up to 39 ft), has specific energy of {approximately}300 W-hr/kg with 45% efficiency, which is adequate for HALE SPA requirements. However, this design has complexity and weight penalties associated with thermal management, electrical wiring, plumbing, and structural weight. A more elegant solution is to use unitized RFC stacks (reversible stacks that act as both FCs and ECs) because these systems have superior specific energy, scale to smaller systems more favorably, and have intrinsically simpler thermal management.

Mitlitsky, F.; Colella, N.J.; Myers, B. [Lawrence Livermore National Lab., CA (United States); Anderson, C.J. [Aero Vironment, Inc., Monrovia, CA (United States)

1993-06-02T23:59:59.000Z

260

Regenerative air energy storage for remote wind–diesel micro-grid communities  

Science Journals Connector (OSTI)

Abstract Remote communities beyond the reach of conventional electricity grids primarily rely on diesel generators (DG) to supply electricity. The systems in these communities are costly to operate because of the high price of transporting diesel to remote areas, and the low overall efficiencies caused by part-load operation of the DG. There is increasing interest to use wind energy converters (WEC) to supplement DG, thereby lowering the fuel consumption and operating costs. In order to use WEC to reduce the economic and environmental burden that DG have on remote communities, an energy storage system can be incorporated to buffer both generation and demand. This can avoid curtailment of the WEC, operate the DG at optimal efficiency, and reduce the necessary maximum installed generator capacities. Regenerative air energy storage (RAES) is a form of compressed air storage that is suitable for deployment in remote communities due to its ability to utilize waste heat from DG to boost the roundtrip efficiency of energy storage. This article presents a numerical model for a RAES system operating in a wind-diesel micro-grid. Simulations are run for varying WEC penetration levels and RAES energy capacities. The results show that in systems with WEC penetration less than 75%, increasing WEC capacity is more economic than adding a RAES system. Above penetration rates of 75%, the use of RAES achieves increased diesel savings with only slightly longer payback than simple wind-diesel systems. In the remote Canadian community case study, the optimal RAES system is 0.5 MW and 1 MW h with a WEC penetration rate of approximately 75%. A larger RAES results in further fuel savings, and thus environmental benefit, with only marginal increase in simple payback period.

Sebastian C. Manchester; Lukas G. Swan; Dominic Groulx

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Biofuels development in Maine: Using trees to oil the wheels of sustainability -Maine news, sports, obituaries, weather -Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustain  

E-Print Network [OSTI]

Biofuels development in Maine: Using trees to oil the wheels of sustainability - Maine news, sports, obituaries, weather - Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustainability/print/[3/13/2013 1:54:43 PM] Biofuels development

Thomas, Andrew

262

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE  

E-Print Network [OSTI]

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE EXPERIMENTAL DATA FOR THE EVALUATION OF HYDROGEN with success a project called DRIVE to the National Research Agency. This project aims at providing procedures and technologies will provide only limited guidance for hydrogen-powered vehicles. That is because

Paris-Sud XI, Université de

263

METHODS OF RADIO-FREQUENCY CURRENT DRIVE  

E-Print Network [OSTI]

METHODS OF RADIO-FREQUENCY CURRENT DRIVE N. J. FISCH* Princeton Plasma Physics Laboratory-670 Radio-frequency waves can penetrate thermonuclear plasmas, depositing momentum and energy with great. INTRODUCTION Using radio-frequency (rf) waves to drive the toroidal current in tokamak reactors is attractive

264

Driving Innovation A Satellite Applications TIC  

E-Print Network [OSTI]

Driving Innovation A Satellite Applications TIC 8 December 2011 Michael Lawrence Head of Special Projects #12;Driving Innovation SatApps TIC - goal `generating growth across the economy through new satellite enabled business' · Note : overall TIC strategy goal ­ accelerating the commercialisation

265

Courtyard Hanover Lebanon 10 Morgan Drive  

E-Print Network [OSTI]

· Boston Logan International Airport (BOS) Airport Phone:1-800-235-6426 Hotel direction: 111 mile for persons with disabilities· #12;Driving Directions from Airport Lebanon Municipal Airport (LEB) Airport Phone:1-603-298-8878 Hotel direction: 4 mile(s) S Driving directions:From Lebanon Airport to the hotel

Myers, Lawrence C.

266

Electric top drives gain wide industry acceptance  

SciTech Connect (OSTI)

Since its introduction, the top drive drilling system has gained acceptance as a productive and safe method for drilling oil and gas wells. Originally, the system was used mostly for offshore and higher cost land drilling, and it had to be installed as a permanent installation because of its enormous weight and size. Essentially, a top drive replaces the kelly and rotary table as the means of rotating drillpipe on oil, gas and geothermal rigs and is considered to be 15% to 40% more efficient than a kelly drive. Top drive systems allow the operator to drill and maintain directional orientation for triple stands and provide tripping efficiency because of the ability to ream and circulate with triple stands, to reduce the risk of stuck pipe or lost wells, and to improve well control and pipe handling safety. The paper describes electric top drives with DC motors, top drives with AC motors, top drives with permanent magnet motors, and top drives with permanent magnet brushless synchronous motors.

Riahi, M.L.

1998-05-01T23:59:59.000Z

267

Gas Mileage Tips - Driving More Efficiently  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving More Efficiently Driving More Efficiently Personalize Fuel Prices Select the fuel type and enter your fuel price to personalize savings estimates. Regular Midgrade Premium Diesel E85 CNG LPG $ 3.33 /gal Save My Prices Use Default Prices Click "Save My Prices" to apply your prices to other pages, or click "Use Default Prices" use national average prices. Drive Sensibly frustrated driver Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33% at highway speeds and by 5% around town. Sensible driving is also safer for you and others, so you may save more than gas money. Fuel Economy Benefit: 5%-33% Equivalent Gasoline Savings: $0.17-$1.10/gallon Observe the Speed Limit (New Information) Graph showing MPG decreases rapidly at speeds above 50 mph

268

Electrifying Your Drive | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

269

Electrifying Your Drive | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

270

Adjustable Speed Drive Study, Part 2.  

SciTech Connect (OSTI)

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The DC motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use.

Wallace, Alan K.; Oregon State University. Dept. of Electrical and Computer Engineering.

1989-08-01T23:59:59.000Z

271

Adjustable Speed Drive Study, Part 1.  

SciTech Connect (OSTI)

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The dc motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use. 31 figs., 6 tabs.

Wallace, Alan K.; Oregon State University. Dept. of Electrical and Computer Engineering.

1989-08-01T23:59:59.000Z

272

Drilling of wells with top drive unit  

SciTech Connect (OSTI)

Well drilling apparatus including a top drive drilling assembly having a motor driven stem adapted to be attached to the upper end of a drill string and drive it during a drilling operation, a torque wrench carried by the top drive assembly and movable upwardly and downwardly therewith and operable to break a threated connection between the drill string and the stem, and an elevator carried by and suspended from the top drive assembly and adapted to engage a section of drill pipe beneath the torque wrench in suspending relation. The torque wrench and elevator are preferably retained against rotation with the rotary element which drives the drill string, but may be movable vertically relative to that rotary element and relative to one another in a manner actuating the apparatus between various different operating conditions.

Boyadjieff, G.I.

1984-05-22T23:59:59.000Z

273

Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Efficient Driving Efficient Driving Behaviors to Conserve Fuel to someone by E-mail Share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Facebook Tweet about Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Twitter Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Google Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Delicious Rank Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Digg Find More places to share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on AddThis.com... More in this section... Idle Reduction Parts & Equipment Maintenance Driving Behavior Management Strategies

274

Development and testing of improved heat transfer media for regenerative thermal oxidizers in the wood products industry  

SciTech Connect (OSTI)

Recently regenerative thermal oxidizers (RTOs) have been used to control gaseous hydrocarbon air pollutant emissions from wood products plants. Two major problems related to the ceramic saddle heat transfer matrix in conventional RTOs have been encountered, cold face fouling and breakdown of the ceramic matrix. A structured packing heat transfer media having straight airflow passages of constant cross section was developed to remedy these problems. Results of pilot scale testing has shown that the structured packing is resistant to cold face fouling and breakdown of the ceramic matrix. In addition, in a full scale retrofit application, improvements in pollutant reduction effectiveness and operating efficiency were measured. 5 refs., 3 figs., 2 tabs.

Klobucar, J.M. [Duerr Industries, Inc., Plymouth, MI (United States)

1996-12-31T23:59:59.000Z

275

Installation considerations for IGBT AC drives  

SciTech Connect (OSTI)

In the last four years, Adjustable Speed ac Drive (ASD) manufacturers have migrated from Bipolar Junction Transistor (BJT) semiconductors to Insulated Gate Bipolar Transistors (IGBTs) as the preferred Output switching device. The advantage of IGBTs over BJTs is that device rise and fall time switching capability is 5 - 10 times faster, resulting in lower device switching loss and a more efficient drive. However, for a similar motor cable length as the BJT drive, the faster output voltage risetime of the IGBT drive may increase the dielectric voltage stress on the motor and cable due to a phenomenon called reflected wave. Faster output dv/dt transitions of IGBT drives also increase the possibility for phenomenon such as increased Common Mode (CM) electrical noise, Electromagnetic Interference (EMI) problems and increased capacitive cable charging current problems. Also, recent experience suggests any Pulse Width Modulated (PWM) drive with a steep fronted output voltage wave form may increase motor shaft voltage and lead to a bearing current phenomenon known as fluting. This paper provides a basic understanding of these issues, as well as solutions, to insure a successful drive system installation.

Skibinski, G.L.

1997-06-01T23:59:59.000Z

276

A high-fidelity harmonic drive model.  

SciTech Connect (OSTI)

In this paper, a new model of the harmonic drive transmission is presented. The purpose of this work is to better understand the transmission hysteresis behavior while constructing a new type of comprehensive harmonic drive model. The four dominant aspects of harmonic drive behavior - nonlinear viscous friction, nonlinear stiffness, hysteresis, and kinematic error - are all included in the model. The harmonic drive is taken to be a black box, and a dynamometer is used to observe the input/output relations of the transmission. This phenomenological approach does not require any specific knowledge of the internal kinematics. In a novel application, the Maxwell resistive-capacitor hysteresis model is applied to the harmonic drive. In this model, sets of linear stiffness elements in series with Coulomb friction elements are arranged in parallel to capture the hysteresis behavior of the transmission. The causal hysteresis model is combined with nonlinear viscous friction and spectral kinematic error models to accurately represent the harmonic drive behavior. Empirical measurements are presented to quantify all four aspects of the transmission behavior. These measurements motivate the formulation of the complete model. Simulation results are then compared to additional measurements of the harmonic drive performance.

Preissner, C.; Royston, T. J.; Shu, D. (APS Engineering Support Division); ( MCS); (Univ. of Illinois)

2012-01-01T23:59:59.000Z

277

Chapter 18: Variable Frequency Drive Evaluation Protocol  

SciTech Connect (OSTI)

An adjustable-speed drive (ASD) includes all devices that vary the speed of a rotating load, including those that vary the motor speed and linkage devices that allow constant motor speed while varying the load speed. The Variable Frequency Drive Evaluation Protocol presented here addresses evaluation issues for variable-frequency drives (VFDs) installed on commercial and industrial motor-driven centrifugal fans and pumps for which torque varies with speed. Constant torque load applications, such as those for positive displacement pumps, are not covered by this protocol. Other ASD devices, such as magnetic drive, eddy current drives, variable belt sheave drives, or direct current motor variable voltage drives, are also not addressed. The VFD is by far the most common type of ASD hardware. With VFD speed control on a centrifugal fan or pump motor, energy use follows the affinity laws, which state that the motor electricity demand is a cubic relationship to speed under ideal conditions. Therefore, if the motor runs at 75% speed, the motor demand will ideally be reduced to 42% of full load power; however, with other losses it is about 49% of full load power.

Romberger, J.

2014-11-01T23:59:59.000Z

278

Aggregation method for motor drive systems  

Science Journals Connector (OSTI)

Abstract When many variable frequency drives are connected to a common switchboard, their aggregated effect on system dynamics can be significant. In this paper, the aggregation method for variable frequency drives and their motors in industrial facilities is proposed, which is suitable for power systems dynamic studies. The proposed method can be applied to various types of motor drive systems. There are two steps involved for the proposed aggregation method: (1) aggregate motor drive systems connected to the same bus, and (2) further combine the aggregated model of motor drive systems from Step 1 with upstream series impedance and/or transformers. Due to involvement of high-order transfer functions in dynamic models of individual motor drive systems, Pade approximation is used as a useful tool in the aggregation process. Using the proposed aggregation method, an equivalent aggregated dynamic model of motor drive systems can be obtained at the substation bus. A case study is conducted in the paper, and the proposed aggregation method is verified to be effective by the case study.

Xiaodong Liang; Wilsun Xu

2014-01-01T23:59:59.000Z

279

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Amgad Elgowainy and Michael Wang Center for Transportation Research Argonne National Laboratory LDV Workshop July26, 2010 2 2 2 Team Members 2  ANL's Energy Systems (ES) Division  Michael Wang (team leader)  Dan Santini  Anant Vyas  Amgad Elgowainy  Jeongwoo Han  Aymeric Rousseau  ANL's Decision and Information Sciences (DIS) Division:  Guenter Conzelmann  Leslie Poch  Vladimir Koritarov  Matt Mahalik  Thomas Veselka  Audun Botterud  Jianhui Wang  Jason Wang 3 3 3 Scope of Argonne's PHEV WTW Analysis: Vehicle Powertrain Systems and Fuel Pathways 3  Vehicle powertrain systems:  Conventional international combustion engine vehicles (ICEVs)

280

Vision and Inertial Sensor Based Drive Trains Control  

E-Print Network [OSTI]

Inertial Sensor Based Drive Trains Control by Haifei Cheng AInertial Sensor Based Drive Trains Control c 2010 by HaifeiInertial Sensor Based Drive Trains Control by Haifei Cheng

Cheng, Haifei

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Driving Efficiencies Track | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Tuesday April 17, 2012 From E-Mail to "The Stream" by Don Burke Taking Records Inventory Into the 21st Century by Lorie A. Robb Engineering and Operations Control: Embrace the Culture by Cheryl Bolen IT Project Management Framework by Denise Hill Wednesday April 18, 2012 Records Warehouse Operations and Records Storage for External Customers by Karen Hatch Preservation of Long-Term Temporary Records by Jeanie Gueretta Mobile Initiatives Effecting Change at Hanford by Don Stewart DOE's CIO's EWA by Sarah Gamage, Don Schade and Alan Andon Green IT 2012: Sustainable Electronics by Edwin Luevanos and Jeff Eagan Thursday April 19, 2012 Document Management and Control System by Melissa Ruth

282

Fuel Economy: What Drives Consumer Choice?  

E-Print Network [OSTI]

S. Kurani, “Car Buyers and Fuel Economy? ” Energy Policy,Fuel Economy: What Drives Consumer Choice? BY TOMa car, do they think about fuel costs over time, are they

Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

2007-01-01T23:59:59.000Z

283

Image fusion for a nighttime driving display  

E-Print Network [OSTI]

An investigation into image fusion for a nighttime driving display application was performed. Most of the image fusion techniques being investigated in this application were developed for other purposes. When comparing the ...

Herrington, William Frederick

2005-01-01T23:59:59.000Z

284

Vehicle Technologies Office: Electric Drive Technologies  

Broader source: Energy.gov [DOE]

Advanced power electronics and electric motors (APEEM) that make up vehicles' electric drive system are essential to hybrid and plug-in electric vehicles. As such, improvements in these...

285

Modeling driving decisions with latent plans  

E-Print Network [OSTI]

Driving is a complex task that includes a series of interdependent decisions. In many situations, these decisions are based on a specific plan. The plan is however unobserved or latent and only the manifestations of the ...

Choudhury, Charisma Farheen, 1978-

2007-01-01T23:59:59.000Z

286

Safe Tractor Operation: Driving on Highways  

E-Print Network [OSTI]

About 50 tractor drivers are killed each year in collisions with other vehicles on public roads. Many of these accidents could be prevented. This publication describes the legal requirements for operating a tractor on public roads, safe driving...

Smith, David

2004-09-16T23:59:59.000Z

287

Adjustable Speed Drive Part-Load Efficiency  

Broader source: Energy.gov [DOE]

An adjustable speed drive (ASD) is a device that controls the rotational speed of motor-driven equipment. Variable frequency drives (VFDs), the most common type of ASDs, efficiently meet varying process requirements by adjusting the frequency and voltage of the power supplied to an AC motor to enable it to operate over a wide speed range. External sensors monitor flow, liquid levels, or pressure and then transmit a signal to a controller that adjusts the frequency and speed to match process requirements.

288

Frequency modulation drive for a piezoelectric motor  

DOE Patents [OSTI]

A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

Mittas, Anthony (Albuquerque, NM)

2001-01-01T23:59:59.000Z

289

Power threshold for neutral beam current drive  

SciTech Connect (OSTI)

For fully noninductive current drive in tokamaks using neutral beams, there is a power and density threshold condition, setting a minimum value for P{sup 3/2}/n{sup 2}. If this condition is not met, stationary state cannot occur, and a tokamak discharge will collapse. This is a consequence of the coupling between current and electron temperature, or between current drive efficiency and energy confinement time. 4 figs.

Politzer, P.A. (General Atomics, San Diego, CA (USA)); Porter, G.D. (Lawrence Livermore National Lab., CA (USA))

1989-10-02T23:59:59.000Z

290

Utilizing the Traction Drive Power Electronics System to Provide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability...

291

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Broader source: Energy.gov (indexed) [DOE]

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2013 DOE Hydrogen and Fuel Cells Program and...

292

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2012 DOE Hydrogen and Fuel Cells Program and...

293

Computer-Aided Engineering for Electric Drive Vehicle Batteries...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) 2011 DOE Hydrogen and Fuel Cells...

294

Impact of Driving Behavior on PHEV Fuel Consumption for Different...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Driving Behavior on PHEV Fuel Consumption for Different Powertrain, Component Sizes and Control Impact of Driving Behavior on PHEV Fuel Consumption for Different Powertrain,...

295

Improving Motor and Drive System Performance - A Sourcebook for...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Is it Cost-Effective to Replace Old Eddy-Current Drives? Adjustable Speed Pumping Applications Consider Steam Turbine Drives for Rotating Equipment...

296

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere...

297

Center for Electric Drive Transportation at the University of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electric Drive Transportation at the University of Michigan - Dearborn Center for Electric Drive Transportation at the University of Michigan - Dearborn 2012 DOE Hydrogen and Fuel...

298

Electric Drive and Advanced Battery and Components Testbed (EDAB...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review and Peer Evaluation vss033carlson2011o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Electric Drive and Advanced...

299

How Exhaust Emissions Drive Diesel Engine Fuel Efficiency | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

How Exhaust Emissions Drive Diesel Engine Fuel Efficiency How Exhaust Emissions Drive Diesel Engine Fuel Efficiency 2004 Diesel Engine Emissions Reduction (DEER) Conference...

300

High-Temperature, Air-Cooled Traction Drive Inverter Packaging...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Temperature, Air-Cooled Traction Drive Inverter Packaging High-Temperature, Air-Cooled Traction Drive Inverter Packaging 2010 DOE Vehicle Technologies and Hydrogen Programs Annual...

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

California and Connecticut: National Fuel Cell Bus Programs Drive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

California and Connecticut: National Fuel Cell Bus Programs Drive Fuel Economy Higher California and Connecticut: National Fuel Cell Bus Programs Drive Fuel Economy Higher August...

302

Energy Department Announces $53 Million to Drive Innovation,...  

Energy Savers [EERE]

Energy Department Announces 53 Million to Drive Innovation, Cut Cost of Solar Power Energy Department Announces 53 Million to Drive Innovation, Cut Cost of Solar Power October...

303

EV Everywhere Grand Challenge Introduction for Electric Drive...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Introduction for Electric Drive Workshop EV Everywhere Grand Challenge Introduction for Electric Drive Workshop Presentation given by EERE Assistant Secretary David Danielson at...

304

Solutions for Interharmonics in Variable Speed Drives for LNG Plants:.  

E-Print Network [OSTI]

??Variable speed drives can cause components of any frequency known as interharmonics. Large variable speed drives in the order of tens of megawatts can replace… (more)

Verhulst, M.P.A.

2011-01-01T23:59:59.000Z

305

INSTALLATION, COMMISSIONING AND TROUBLE SHOOTING OF VARIABLE FREQUENCY DRIVE.  

E-Print Network [OSTI]

??In this thesis, the installation of variable frequency drive on board a ship is introduced briefly. In this particular study the variable frequency drive was… (more)

Kuituniemi, Santtu

2013-01-01T23:59:59.000Z

306

US DRIVE Vehicle Systems and Analysis Technical Team Roadmap...  

Energy Savers [EERE]

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan Vehicle Technologies Office: 2013 Vehicle and Systems Simulation...

307

Study of the Reliability Enhancement of Wind Turbines Employing Direct-drive Technology.  

E-Print Network [OSTI]

??In traditional wind turbines employing gearboxes, the blades spin a shaft that is connected through a gearbox to the generator. The multiple wheels and bearings… (more)

Sara George, Reeba

2012-01-01T23:59:59.000Z

308

Direct - drive permanent magnet synchronous generator design for hydrokinetic energy extraction .  

E-Print Network [OSTI]

??"Hydrokinetic turbines deliver lower shaft speeds when compared to both steam and wind turbines. Hence, a water wheel generator must operate at speeds as low… (more)

Kashyap, Amshumaan Raghunatha

2013-01-01T23:59:59.000Z

309

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan  

Broader source: Energy.gov [DOE]

This document describes the vision, mission, scope, and governing policies of the U.S. DRIVE Partnership (“Partnership”). Dated December 2014.

310

News & Views ISSN 1746-075110.2217/RME.13.31 2013 Future Medicine Ltd Regen. Med. (2013) 8(4), 409412 409  

E-Print Network [OSTI]

News & Views ISSN 1746-075110.2217/RME.13.31 © 2013 Future Medicine Ltd Regen. Med. (2013) 8(4), 409­412 409 News & ViewsNews & ViewsNews & Views What first brought you from the engineering

Zandstra, Peter W.

311

Hydraulic Drivetrain and Regenerative Braking Team 13: Andrew Brown, Karan Desai, Andrew McGrath, Hurst Nuckols, Grant Wilson Adviser: Dr. Andrew Jackson  

E-Print Network [OSTI]

. The main components of the model include an electric motor, hydraulic pump, hydraulic motor and two 1 flow during regenerative braking Electric Motor: Provides rotational energy to the hydraulic drivetrain (% kinetic energy recovered) 24.73% Drivetrain Efficiency 67.02% Overall Efficiency 53.47% Current Electric

Carpick, Robert W.

312

DistributionDrive | Open Energy Information  

Open Energy Info (EERE)

DistributionDrive DistributionDrive Jump to: navigation, search Name DistributionDrive Place Addison, Texas Zip 75001 Product Supplier of Biodiesel, Straight Vegetable Oil (SVO), Recycled Vegetable Oil (WVO) and Engine Conversion Kits to use this fuels. Coordinates 38.477365°, -80.412149° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.477365,"lon":-80.412149,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

313

Drive Less, Save More | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

314

Drive Less, Save More | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

315

Microsoft Word - ORNL Hard Drives Final 08132010  

Broader source: Energy.gov (indexed) [DOE]

Inspections and Special Inquires Inspections and Special Inquires Inspection Report Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory INS-O-10-03 August 2010 Department of Energy Washington, DC 20585 August 16, 2010 MEMORANDUM FOR THE DIRECTOR, OFFICE OF SCIENCE FROM: Sandra D. Bruce Assistant Inspector General for Inspections and Special Inquiries SUBJECT: INFORMATION: Inspection Report on "Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory" BACKGROUND The Department of Energy's (Department) Oak Ridge National Laboratory (ORNL) in Oak

316

Oxygen enriched combustion system performance study. Phase 2: 100 percent oxygen enriched combustion in regenerative glass melters, Final report  

SciTech Connect (OSTI)

The field test project described in this report was conducted to evaluate the energy and environmental performance of 100% oxygen enriched combustion (100% OEC) in regenerative glass melters. Additional objectives were to determine other impacts of 100% OEC on melter operation and glass quality, and to verify on a commercial scale that an on-site Pressure Swing Adsorption oxygen plant can reliably supply oxygen for glass melting with low electrical power consumption. The tests constituted Phase 2 of a cooperative project between the United States Department of Energy, and Praxair, Inc. Phase 1 of the project involved market and technical feasibility assessments of oxygen enriched combustion for a range of high temperature industrial heating applications. An assessment of oxygen supply options for these applications was also performed during Phase 1, which included performance evaluation of a pilot scale 1 ton per day PSA oxygen plant. Two regenerative container glass melters were converted to 100% OEC operation and served as host sites for Phase 2. A 75 ton per day end-fired melter at Carr-Lowrey Glass Company in Baltimore, Maryland, was temporarily converted to 100% OEC in mid- 1990. A 350 tpd cross-fired melter at Gallo Glass Company in Modesto, California was rebuilt for permanent commercial operation with 100% OEC in mid-1991. Initially, both of these melters were supplied with oxygen from liquid storage. Subsequently, in late 1992, a Pressure Swing Adsorption oxygen plant was installed at Gallo to supply oxygen for 100% OEC glass melting. The particular PSA plant design used at Gallo achieves maximum efficiency by cycling the adsorbent beds between pressurized and evacuated states, and is therefore referred to as a Vacuum/Pressure Swing Adsorption (VPSA) plant.

Tuson, G.B.; Kobayashi, H.; Campbell, M.J.

1994-08-01T23:59:59.000Z

317

Remedial neural network inverse control of a multi-phase fault-tolerant permanent-magnet motor drive for electric vehicles  

Science Journals Connector (OSTI)

A five-phase in-wheel fault-tolerant interior permanent-magnet (FT-IPM) motor incorporates the merits of high efficiency, high power density and high reliability, suitable for Electric Vehicles (EVs). A new remedial Neural Networks Inverse (NNI) control strategy is proposed to attain the post-fault operation. In this scheme, the NN is used to approximate the inverse model of the FT-IPM motor. With this NNI system and the original motor drive combined, a pseudo-linear compound system can be obtained. The simulation demonstrates that the proposed control strategy leads to excellent control performance at the faulty mode and offers good robustness against load disturbance.

Duo Zhang; Guohai Liu; Wenxiang Zhao

2013-01-01T23:59:59.000Z

318

"It's Like Giving Us a Car, Only Without the Wheels": Performance of Latina Students at an Early College High School  

E-Print Network [OSTI]

School. (December 2011) Leslie Ann Locke, B.S.; M.L.S, University of Minnesota?Twin Cities Chair of Advisory Committee: Dr. Kathryn McKenzie This dissertation presents the results from an empirical study of the perspectives of Latina students who... ?IT?S LIKE GIVING US A CAR, ONLY WITHOUT THE WHEELS?: PERFORMANCE OF LATINA STUDENTS AT AN EARLY COLLEGE HIGH SCHOOL A Dissertation by LESLIE ANN LOCKE Submitted to the Office of Graduate Studies of Texas A&M University...

Locke, Leslie Ann

2012-02-14T23:59:59.000Z

319

E-Print Network 3.0 - adjustable electric drives Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

drives Search Powered by Explorit Topic List Advanced Search Sample search results for: adjustable electric drives...

320

The making of driving cultures Jane Moeckli  

E-Print Network [OSTI]

and traffic safety as effects of culture. In order to understand culture's role in shaping driving behavior of culture. We argue that how the traffic safety community defines culture dictates courses of action taken traffic safety. It is our hope that these suggestions will expand the definition of culture to better

Lee, John D.

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Hard Drive Power Consumption Uncovered Computer Laboratory  

E-Print Network [OSTI]

Hard Drive Power Consumption Uncovered Computer Laboratory Digital Technology Group Anthony Hylick, Andrew Rice, Brian Jones, Ripduman Sohan Motivation Attempts to reduce power consumption have mainly of power consumption and identify the need for a more expressive API between the OS and hardware devices

Cambridge, University of

322

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

1988-01-01T23:59:59.000Z

323

COMMITMENT & INTEGRITY DRIVE RESULTS Industry, Nonprofit,  

E-Print Network [OSTI]

-containing particles in wastewater. #12;000000.00 3COMMITMENT & INTEGRITY DRIVE RESULTS My Industry Experience 6 years, drinking water, sanitary wastewater, industrial wastewater, and stormwater Worked for private industry of waste, materials storage, product recycling, remediation, property transfers Internal Pressures Profit

Lipson, Michal

324

Safety Considerations When Driving on Rural Roads  

E-Print Network [OSTI]

procedures to follow. Characteristics of rural or forest roads Extra caution is required when driving-moving vehicles, animals, debris) · Unusually steep hills or sharp curves Since help may often be difficult.Agricultural or prescribed forest burning may produce smoke on roads. Hazard: Approaching vehicles, livestock or wild animals

Vivoni, Enrique R.

325

Recent Transitions in Ethiopian Homegarden Agroforestry: Driving  

E-Print Network [OSTI]

of the system dynamics shows that all underlying driving forces interact with each other and cause change, shrinking farm size, poverty and a new market situation and has gradually been changing towards monoculture production of khat (Catha edulis) and eucalyptus species. The consequence of the transitions on ecology

326

BRAF Inactivation Drives Aneuploidy by Deregulating CRAF  

Science Journals Connector (OSTI)

...o mice were born alive at a frequency of 13% and these adult mice...S4). Significantly, the frequency of diploid metaphases decreased...kinetics of tetraploidization was variable (Fig. 4C). Aneuploidization...Craf activation, and this drives aneuploidy in the spleen and...

Tamihiro Kamata; Jahan Hussain; Susan Giblett; Robert Hayward; Richard Marais; and Catrin Pritchard

2010-11-01T23:59:59.000Z

327

Program assists steam drive design project  

SciTech Connect (OSTI)

A new program for the HP-41CV programmable calculator will compute all parameters required for a steam drive project design. The Marx and Langenheim model assumptions are used to solve a more advanced version of the Myhill and Stegemeier model. Also, the Mandl and Volek model assuptions are used to compute the size of the steam zone.

Mendez, A.A.

1984-08-27T23:59:59.000Z

328

Alternative Fuels Data Center: Texas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Texas Laws and Incentives for Driving / Idling

329

Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nebraska Laws and Incentives for Driving / Idling

330

Alternative Fuels Data Center: Maine Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maine Laws and Incentives for Driving / Idling

331

Alternative Fuels Data Center: Federal Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Federal Laws and Incentives for Driving / Idling

332

Alternative Fuels Data Center: Florida Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Florida Laws and Incentives for Driving / Idling

333

Alternative Fuels Data Center: Iowa Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Iowa Laws and Incentives for Driving / Idling

334

Alternative Fuels Data Center: Maryland Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maryland Laws and Incentives for Driving / Idling

335

Alternative Fuels Data Center: Alaska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Alaska Laws and Incentives for Driving / Idling

336

Alternative Fuels Data Center: Vermont Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Vermont Laws and Incentives for Driving / Idling

337

Vehicle Technologies Office: Fact #452: January 15, 2007 Driving  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2: January 15, 2: January 15, 2007 Driving Differences to someone by E-mail Share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Facebook Tweet about Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Twitter Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Google Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Delicious Rank Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Digg Find More places to share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on AddThis.com... Fact #452: January 15, 2007 Driving Differences Those living in the center city drive fewer miles in a day than those in

338

Alternative Fuels Data Center: Indiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Indiana Laws and Incentives for Driving / Idling

339

Alternative Fuels Data Center: Delaware Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Delaware Laws and Incentives for Driving / Idling

340

Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wyoming Laws and Incentives for Driving / Idling

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oklahoma Laws and Incentives for Driving / Idling

342

Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Hawaii Laws and Incentives for Driving / Idling

343

Alternative Fuels Data Center: Virginia Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Virginia Laws and Incentives for Driving / Idling

344

Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Tennessee Laws and Incentives for Driving / Idling

345

Alternative Fuels Data Center: Oregon Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oregon Laws and Incentives for Driving / Idling

346

Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Minnesota Laws and Incentives for Driving / Idling

347

Alternative Fuels Data Center: Missouri Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Missouri Laws and Incentives for Driving / Idling

348

Alternative Fuels Data Center: Utah Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Utah Laws and Incentives for Driving / Idling

349

Alternative Fuels Data Center: Idaho Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idaho Laws and Incentives for Driving / Idling

350

Alternative Fuels Data Center: Illinois Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Illinois Laws and Incentives for Driving / Idling

351

Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kentucky Laws and Incentives for Driving / Idling

352

Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Louisiana Laws and Incentives for Driving / Idling

353

Alternative Fuels Data Center: Arizona Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Arizona Laws and Incentives for Driving / Idling

354

Alternative Fuels Data Center: Nevada Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nevada Laws and Incentives for Driving / Idling

355

Alternative Fuels Data Center: Montana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Montana Laws and Incentives for Driving / Idling

356

Alternative Fuels Data Center: Colorado Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Colorado Laws and Incentives for Driving / Idling

357

Alternative Fuels Data Center: Kansas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kansas Laws and Incentives for Driving / Idling

358

Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wisconsin Laws and Incentives for Driving / Idling

359

Drive piston assembly for a valve actuator assembly  

DOE Patents [OSTI]

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

Sun, Zongxuan (Troy, MI)

2010-02-23T23:59:59.000Z

360

The history of the bicycle goes back to the 1800's. Investigating the innovative changes in materials, changeable gears, wheel sizes and frame shapes over the past two hundred years  

E-Print Network [OSTI]

the innovative changes in materials, changeable gears, wheel sizes and frame shapes over the past two hundred in the 1970's that had bigger tires, at handle bars, and a bigger wheel base that all provided more control is a diagram labeling the components of a bicycle. The pieces that make up the frame of the bicycle

Belanger, David P.

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Predictions of fast wave heating, current drive, and current drive antenna arrays for advanced tokamaks  

SciTech Connect (OSTI)

The objective of the advanced tokamak program is to optimize plasma performance leading to a compact tokamak reactor through active, steady state control of the current profile using non-inductive current drive and profile control. To achieve these objectives requires compatibility and flexibility in the use of available heating and current drive systems--ion cyclotron radio frequency (ICRF), neutral beams, and lower hybrid. For any advanced tokamak, the following are important challenges to effective use of fast waves in various roles of direct electron heating, minority ion heating, and current drive: (1) to employ the heating and current drive systems to give self-consistent pressure and current profiles leading to the desired advanced tokamak operating modes; (2) to minimize absorption of the fast waves by parasitic resonances, which limit current drive; (3) to optimize and control the spectrum of fast waves launched by the antenna array for the required mix of simultaneous heating and current drive. The authors have addressed these issues using theoretical and computational tools developed at a number of institutions by benchmarking the computations against available experimental data and applying them to the specific case of TPX.

Batchelor, D.B.; Baity, F.W.; Carter, M.D. [and others

1994-12-31T23:59:59.000Z

362

Adjustable speed drive for residential applications  

SciTech Connect (OSTI)

This paper describes a demonstration of an adjustable speed drive suitable for use in residential applications such as compressors and fans in heat pumps, air conditioners, and refrigerators. The adjustable speed drive uses only a four-diode rectifier and a six-transistor six-diode inverter and does not require a source-frequency filter inductor or capacitor. Motor speed is adjusted with source-frequency phase control eliminating the switching loss and electromagnetic interference caused by the more commonly used high-frequency pulse-width modulation. Low source-current distortion and high power factor are obtained at a full-load operating point which is found using a parametric analysis.

Jungreis, A.M.; Kelley, A.W. [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering] [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

363

Driving Energy Performance with Energy Management Teams  

E-Print Network [OSTI]

Driving Energy Performance with Energy Management Teams Meredith Younghein ENERGY STAR Industrial Communications Mgr. U.S. Environmental Protection Agency Washington, DC ABSTRACT Companies today face an uncertain energy future. Businesses... face escalating energy prices which can erode profits. Concerns over supply reliability, and possible regulation of carbon emissions create risk. For many industries in the U.S., energy costs are equal to the cost of raw materials or even employee...

Younghein, M.; Tunnessen, W.

2006-01-01T23:59:59.000Z

364

Alternative Fuels Data Center: California Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

365

Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

366

Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

367

An Optimization Model for Eco-Driving at Signalized Intersection  

E-Print Network [OSTI]

This research develops an optimization model for eco-driving at signalized intersection. In urban areas, signalized intersections are the “hot spots” of air emissions and have significant negative environmental and health impacts. Eco-driving is a...

Chen, Zhi

2013-07-15T23:59:59.000Z

368

DOE Releases U.S. DRIVE Technical Accomplishments Report | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Enhanced materials and designs that can reduce the cost of on-board hydrogen storage tanks by 15% U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy...

369

Do You Drive a Hybrid Electric Vehicle? | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Do You Drive a Hybrid Electric Vehicle? Do You Drive a Hybrid Electric Vehicle? July 9, 2009 - 1:34am Addthis In Tuesday's entry, Francis X. Vogel from the Wisconsin Clean Cities...

370

Columbia Power Technologies, Inc. Deploys its Direct Drive Wave...  

Energy Savers [EERE]

Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy April 9, 2013 - 12:00am...

371

Optimization of Driving Styles for Fuel Economy Improvement  

SciTech Connect (OSTI)

Modern vehicles have sophisticated electronic control units, particularly to control engine operation with respect to a balance between fuel economy, emissions, and power. These control units are designed for specific driving conditions and testing. However, each individual driving style is different and rarely meets those driving conditions. In the research reported here we investigate those driving style factors that have a major impact on fuel economy. An optimization framework is proposed with the aim of optimizing driving styles with respect to these driving factors. A set of polynomial metamodels are constructed to reflect the responses produced by changes of the driving factors. Then we compare the optimized driving styles to the original ones and evaluate the efficiency and effectiveness of the optimization formulation.

Malikopoulos, Andreas [ORNL] [ORNL; Aguilar, Juan P. [Georgia Institute of Technology] [Georgia Institute of Technology

2012-01-01T23:59:59.000Z

372

Fact #759: December 24, 2012 Rural vs. Urban Driving Differences  

Broader source: Energy.gov [DOE]

According to the National Household Travel Survey, those living in rural areas drive ten more miles in a day than those who live in cities. People living in the suburbs drive only about three to...

373

Transport Research Arena 2014, Paris Driving assistances for senior drivers  

E-Print Network [OSTI]

and to analyse actual driving behaviours and specific difficulties of older drivers in ecological driving conditions, using an instrumented vehicle on open roads. The aim is then to ergonomically specify and design

Paris-Sud XI, Université de

374

Economical Aspects of Adjustable Speed Drives in Pumping Systems  

E-Print Network [OSTI]

Speed variations of pumps have become increasingly popular as the technology to produce variable frequency drives has progressed. Variable speed drives have many advantages compared to throttle valves when it comes to regulation of flow. They offer...

Hovstadius, G.

375

Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

376

Alternative Fuels Data Center: Washington Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

377

Indianapolis Offers a Lesson on Driving Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Indianapolis Offers a Lesson on Driving Demand Indianapolis Offers a Lesson on Driving Demand The flier for EcoHouse, with the headline 'Save energy, save money, improve your home'...

378

GenDrive Limited | Open Energy Information  

Open Energy Info (EERE)

GenDrive Limited GenDrive Limited Jump to: navigation, search Name GenDrive Limited Place Cambridge, United Kingdom Zip CB23 3GY Sector Renewable Energy, Solar, Wind energy Product Developing a range of grid-connected inverters, 'Plug & Play', for renewable energy (mostly solar and wind) systems. These are intended to improve ease of installation. Coordinates 43.003745°, -89.017499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.003745,"lon":-89.017499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

379

Fast wave current drive in DEMO  

SciTech Connect (OSTI)

The ability to non-inductively drive a large fraction of the toroidal plasma current in magnetically confined plasmas is an essential requirement for steady state fusion reactors such as DEMO. Besides neutral beam injection (NBI), electron-cyclotron resonance heating (ECRH) and lower hybrid wave heating (LH), ion-cyclotron resonance heating (ICRH) is a promising candidate to drive current, in particular at the high temperatures expected in fusion plasmas. In this paper, the current drive (CD) efficiencies calculated with coupled ICRF wave / CD numerical codes for the DEMO-1 design case (R{sub 0}=9m, B{sub 0}=6.8T, a{sub p}=2.25m) [1] are presented. It will be shown that although promising CD efficiencies can be obtained in the usual ICRF frequency domain (20-100MHz) by shifting the dominant ion-cyclotron absorption layers to the high-field side, operation at higher frequencies (100-300MHz) has a stronger CD potential, provided the parasitic RF power absorption of the alpha particles can be minimized.

Lerche, E.; Van Eestera, D.; Messiaen, A. [Association EURATOM-Belgian State, LPP-ERM/KMS, TEC partner, Brussels (Belgium); Franke, T. [Max-Planck-Institut für Plasmaphysik, EURATOM-Assoziation, Garching (Germany); Collaboration: EFDA-PPPT Contributors

2014-02-12T23:59:59.000Z

380

Energetic Drives LLC | Open Energy Information  

Open Energy Info (EERE)

Energetic Drives LLC Energetic Drives LLC Jump to: navigation, search Name Energetic Drives LLC Place Gresham, Oregon Zip 97030 Sector Efficiency, Wind energy Product Oregon-based engineering firm that conducts industrial efficiency improvements, as well as repair and maintenance work for grid-tie inverters and wind turbines ranging from 10kW to 1.2MW. Coordinates 44.84866°, -88.786959° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.84866,"lon":-88.786959,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Design Principles of a flywheel Regenerative Braking System (f-RBS) for Formula SAE type racecar and system testing on a Virtual Test Rig modeled on MSC ADAMS  

E-Print Network [OSTI]

momentum in the industry [4]. These vehicles (BEVs and HEVS) use electric motor/generator pairs to propel themselves and to recapture braking energy (electric RBS) and the power source is the battery. The regenerative braking system uses a generator..., aerodynamic and road losses. 4. Improvised Transmission design to reduce losses. 5. Hybrid and Alternative Energy Propulsion systems e.g. the Hybrid Electric Vehicle (HEV), the Fuel Cell Vehicle (FCV). 6. Recycling Braking energy – Storage and reuse...

Pochiraju, Anirudh

2012-08-31T23:59:59.000Z

382

FY 2014 Annual Progress Report- Electric Drive Technologies Program  

Broader source: Energy.gov [DOE]

FY 2014 Annual Progress Report for the Electric Drive Technologies Program of the Vehicle Technologies Office, DOE/EE-1163

383

Well-to-Wheel Energy, Emissions, and Cost Analysis of Electricity and Fuel Used in Conventional and Electrified Vehicles, and Their Connection to a Sustainable Energy Infrastructure  

E-Print Network [OSTI]

produced in creating the electricity through a full Life Cycle Analysis. As a result, proper comparison of electrified and conventional vehicles must include a complete Well-to-Wheel (WtW) study including the emissions generated through production and use...

Strecker, Bryan Anthony

2012-12-31T23:59:59.000Z

384

How to Properly Secure Your Bicycle Make sure the U-lock passes through the center of the frame as well as both wheels!  

E-Print Network [OSTI]

How to Properly Secure Your Bicycle Make sure the U-lock passes through the center of the frame as well as both wheels! Improperly Securing & Locking Your Bicycle Makes It an Easy Target for Thieves and seats Most thefts of bicycles occur because the lock being used is either a cable lock

Blanchette, Robert A.

385

Snubber circuit designed for electric car drive system  

Science Journals Connector (OSTI)

This article presents a method to develop the speed-controller dc-motor chopper drive system by using mosfet as the switching drive for motor speed control. The switching current during ton state, and toff state of the mosfet can cause power ... Keywords: chopper, electric drive, mosfet, parallel connected, power dissipation, snubber circuit

Sakrawee Raweekul

2012-01-01T23:59:59.000Z

386

LAPP-TECH-2013-01 DRIVE BEAM STRIPLINE BPM  

E-Print Network [OSTI]

1 LAPP-TECH-2013-01 DRIVE BEAM STRIPLINE BPM ELECTRONICS AND ACQUISITION. Jean-Marc Nappa, Jean- around acquisition and components tests for drive beam stripline BPM read-out. The choice of the presented stripline BPM as the drive beam position monitor is not definitive. The aim of this study

Paris-Sud XI, Université de

387

Drive torque actuation in active surge control of centrifugal compressors  

E-Print Network [OSTI]

an approximation of a real compression system. 1 #12;CompressorShaft Electric drive Active surge control law Shaft (1999b) or Willems and de Jager (1999). In this study, which is on compressors with electrical drives, we propose to use the electrical drive as a means of active surge control, as depicted in Figure 1.

Gravdahl, Jan Tommy

388

Social drive and the evolution of primate hearing  

Science Journals Connector (OSTI)

...coevolved. (d) Social drive Another explanation...strength of this social drive model is twofold...increased 60 dB high-frequency limits. Increased...distances amid more variable habitats [81...often have a high-frequency acoustic structure...explore this social drive hypothesis, we...

2012-01-01T23:59:59.000Z

389

Theoretical research on working fluid selection for a high-temperature regenerative transcritical dual-loop engine organic Rankine cycle  

Science Journals Connector (OSTI)

Abstract In this paper, a regenerative transcritical dual-loop organic Rankine cycle is proposed to recover the waste heat of the exhaust, engine coolant and all the residual heat of the HT loop. Double regenerators are adopted in this system. Transcritical cycles are used in both loops. Hexamethyldisiloxane (MM), octamethyl cyclotetrasiloxane (D4), octamethyltrisiloxane (MDM), cyclohexane, toluene and n-decane are chosen as the candidate working fluids of the HT loop and \\{R143a\\} is chosen as the working fluid of the LT loop. Influences of inlet temperature of turbine THT (T3) on mass flow rates (mf,HT and mf,LT), net output power (Wnet), energy conversion efficiency (?ec), volumetric expansion ratio (VER), ratio of power consumed to power output (COR) and component irreversibility are analyzed and performance comparison of these working fluids is also evaluated. Results show that toluene possesses the maximum Wnet (42.46 kW), highest ?e (51.92%) and ?ec (12.77%). The increase of T3 worsens system performance, decreasing Wnet, ?e and ?ec. Condenser CLT and turbine TLT possess the least system irreversibility. In addition, turbines and exhaust evaporators are optimized components.

Hua Tian; Lina Liu; Gequn Shu; Haiqiao Wei; Xingyu Liang

2014-01-01T23:59:59.000Z

390

International Assessment of Electric-Drive Vehicles: Policies, Markets, and Technologies  

E-Print Network [OSTI]

Assessmentof Electric-Drive Vehicles: Policies, Markets, andInternational Assessment Electric-Drive Vehicles: Policies,International Assessment Electric-Drive Vehicles Policies,

Sperling, Daniel; Lipman, Timothy

2003-01-01T23:59:59.000Z

391

Economic Assessment of Electric-Drive Vehicle Operation in California and the United States  

E-Print Network [OSTI]

ECONOMIC ASSESSMENT OF ELECTRIC-DRIVE VEHICLE OPERATION INECONOMIC ASSESSMENT OF ELECTRIC-DRIVE VEHICLE OPERATION INconsumers to switch to electric-drive vehicles, including a

Lidicker, Jeffrey R.; Lipman, Timothy E.; Shaheen, Susan A.

2010-01-01T23:59:59.000Z

392

Well-to-wheel Energy Consumption and Pollutant Emissions Comparison between Electric and Non-electric Vehicles: a Modeling Approach  

Science Journals Connector (OSTI)

Although electric vehicles (EVs) gain more and more popularity these years, the issue on whether they are really more environmentally and ecologically sound than non-electric vehicles, e.g. gasoline and diesel fuel burned internal combustion engine (ICE) vehicles has become a heat-debated one. This paper outlines an assessment model which intends to compare well-to-wheel energy consumption and pollutant emissions between \\{EVs\\} and non-electric ones, using Analytic Hierarchy Process (AHP) technique based on the potential environmental and ecological impact. The modeling in this case predicted that from the perspective of total energy consumption and pollution, further improvements are still necessary for the feasibility and widespread use of EVs.

Z.J. Li; X.L. Chen; M. Ding

2012-01-01T23:59:59.000Z

393

Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications  

E-Print Network [OSTI]

This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD...

Anderson, K. J.; Chvala, W. D.

394

PWM drive filter inductor influence on transient immunity  

SciTech Connect (OSTI)

Surges of less than 200% magnitude caused by utility capacitor switching can disrupt PWM drives. In this paper, the disruption mechanism is investigated by SPICE simulation of the drive and the results are compared to field tests. An over current surge in the rectifier/filter section and dc over voltage are the most common disruption mechanisms. The drive dc filter inductor is the most important factor in capacitor transient sensitivity of the drive. A drive without the inductor or one in which the inductor is saturated by the transient is vulnerable to disruption.

Wagner, V.E. [Detroit Edison, MI (United States); Strangas, E. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

395

Oscillatory nonohomic current drive for maintaining a plasma current  

DOE Patents [OSTI]

Apparatus and methods are described for maintaining a plasma current with an oscillatory nonohmic current drive. Each cycle of operation has a generation period in which current driving energy is applied to the plasma, and a relaxation period in which current driving energy is removed. Plasma parameters, such as plasma temperature or plasma average ionic charge state, are modified during the generation period so as to oscillate plasma resistivity in synchronism with the application of current driving energy. The invention improves overall current drive efficiencies.

Fisch, N.J.

1984-01-01T23:59:59.000Z

396

Oscillatory nonhmic current drive for maintaining a plasma current  

DOE Patents [OSTI]

Apparatus and method of the invention maintain a plasma current with an oscillatory nonohmic current drive. Each cycle of operation has a generation period in which current driving energy is applied to the plasma, and a relaxation period in which current driving energy is removed. Plasma parameters, such as plasma temperature or plasma average ionic charge state, are modified during the generation period so as to oscillate plasma resistivity in synchronism with the application of current driving energy. The invention improves overall current drive efficiencies.

Fisch, Nathaniel J. (Princeton, NJ)

1986-01-01T23:59:59.000Z

397

NREL: Fleet Test and Evaluation - Hybrid Electric Drive Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hybrid Electric Drive Systems Hybrid Electric Drive Systems The Fleet Test and Evaluation Team conducts performance evaluations of hybrid electric drive systems in fleets of delivery vehicles and transit buses. Hybrid electric drive systems combine a primary power source, an energy storage system, and an electric motor to achieve a combination of emissions, fuel economy, and range benefits unattainable with any of these technologies alone. Hybrid electric drive systems use less petroleum-based fuel and capture energy created during breaking and idling. This collected energy is used to propel the vehicle during normal drive cycles. The batteries supply additional power for acceleration and hill climbing. Learn more about the team's hybrid electric drive system evaluations: Delivery Vehicles

398

Vehicle Technologies Office: Materials for Hybrid and Electric Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Hybrid and for Hybrid and Electric Drive Systems to someone by E-mail Share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Facebook Tweet about Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Twitter Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Google Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Delicious Rank Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Digg Find More places to share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines

399

Technological Advances in Hydraulic Drive Trains for Wind Turbines  

Science Journals Connector (OSTI)

The reliability of frequency converters is a major concern for wind turbines. ChapDrive AS has built and tested a hydraulic drive train for variable speed wind turbines which includes a synchronous generator that is connected to the grid without the use of a frequency converter. The hydraulic drive train consists of a hydraulic pump, a variable displacement hydraulic motor, and a synchronous generator, which enables rotor speed control while maintaining synchronous speed of the generator. It has been proven that the hydraulic drive train and the ChapDrive Control system are able to absorb fluctuations in the wind speed and maintain a constant power output without the use of frequency converters. The hydraulic drive train and the ChapDrive Control system has been modeled analytically and compared to measurements, demonstrating a good agreement between simulations and measurements.

K.E.Thomsen; O.G. Dahlhaug; M.O.K. Niss; S.K. Haugset

2012-01-01T23:59:59.000Z

400

Empowering Operators to Drive Sustainable Savings  

E-Print Network [OSTI]

Ruiz carlos.ruiz@soteicavisualmesa.com Soteica Visual MESA LLC 15995 N. Barker?s Landing Ste 320, Houston, TX 77079 http://www.soteica.com Antonio Garc?a Nogales CEPSA QU?MICA S.A. Pol?gono Industrial Guadarranque ? San Roque (C?diz) - Espa... Soteica?s Visual MESA solution to optimize their utility optimization. Visual MESA is an online energy management system that enables operators to reduce costs (see references 1 to 6 below), which has been used to drive sustained operational energy...

Reitmeier, T.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Well performance under solutions gas drive  

SciTech Connect (OSTI)

A fully implicit black-oil simulator was written to predict the drawdown and buildup responses for a single well under Solution Gas Drive. The model is capable of handling the following reservoir behaviors: Unfractured reservoir, Double-Porosity system, and Double Permeability-Double Porosity model of Bourdet. The accuracy of the model results is tested for both single-phase liquid flow and two-phase flow. The results presented here provide a basis for the empirical equations presented in the literature. New definitions of pseudopressure and dimensionless time are presented. By using these two definitions, the multiphase flow solutions correlate with the constant rate liquid flow solution for both transient and boundary-dominated flow. For pressure buildup tests, an analogue for the liquid solution is constructed from the drawdown pseudopressure, similar to the reservoir integral of J. Jones. The utility of using the producing gas-oil ration at shut in to compute pseudopressures and pseudotimes is documented. The influence of pressure level and skin factor on the Inflow Performance Relationship (IPR) of wells producing solution gas drive systems is examined. A new definition of flow efficiency that is based on the structure of the deliverability equations is proposed. This definition avoids problems that result when the presently available methods are applied to heavily stimulated wells. The need for using pseudopressures to analyze well test data for fractured reservoirs is shown. Expressions to compute sandface saturations for fractured systems are presented.

Camacho-Velazquez, R.G.

1987-01-01T23:59:59.000Z

402

Cylindrical implosion experiments using laser direct drive  

SciTech Connect (OSTI)

Direct-drive cylindrical-implosion experiments are performed to study perturbed hydrodynamic flows in convergent geometry. Two experimental campaigns have been conducted, to demonstrate the advantages of direct over indirect drive and to validate numerical simulations of zeroth-order hydrodynamics and single-mode perturbation growth. Results and analysis of three unperturbed-target shots and two perturbed-target shots are discussed in detail. For unperturbed-target implosions, positions of inner and outer shell edges agree between simulation and experiment during the laser pulse. However, observed shell thickness is greater than simulated in unperturbed targets during deceleration and rebound; the effect appears only at the shell{close_quote}s exterior edge. For perturbed-target implosions, growth factors {approximately}10{endash}14 are observed, whereas growth factors near 30 are expected from simulation. Rayleigh{endash}Taylor growth appears to differ between simulation and experiment. Observed zeroth-order flow at the exterior edge of imploding, perturbed targets appears to differ from simulation, even during acceleration. A possible physical model to explain such apparent differences is identified. {copyright} {ital 1999 American Institute of Physics.}

Tubbs, D.L.; Barnes, C.W.; Beck, J.B.; Hoffman, N.M.; Oertel, J.A.; Watt, R.G. [Los Alamos National Laboratory, Post Office Box 1663, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, Post Office Box 1663, Los Alamos, New Mexico 87545 (United States); Boehly, T.; Bradley, D.; Jaanimagi, P.; Knauer, J. [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States)] [Laboratory for Laser Energetics, University of Rochester, 250 East River Road, Rochester, New York 14623-1299 (United States)

1999-05-01T23:59:59.000Z

403

Electric-drive tractability indicator integrated in hybrid electric vehicle tachometer  

DOE Patents [OSTI]

An indicator, system and method of indicating electric drive usability in a hybrid electric vehicle. A tachometer is used that includes a display having an all-electric drive portion and a hybrid drive portion. The all-electric drive portion and the hybrid drive portion share a first boundary which indicates a minimum electric drive usability and a beginning of hybrid drive operation of the vehicle. The indicated level of electric drive usability is derived from at least one of a percent battery discharge, a percent maximum torque provided by the electric drive, and a percent electric drive to hybrid drive operating cost for the hybrid electric vehicle.

Tamai, Goro; Zhou, Jing; Weslati, Feisel

2014-09-02T23:59:59.000Z

404

DRIVE(tm) Mobile App | Open Energy Information  

Open Energy Info (EERE)

DRIVE(tm) Mobile App DRIVE(tm) Mobile App Jump to: navigation, search Tool Summary LAUNCH TOOL Name: DRIVE(tm) Mobile App Agency/Company /Organization: Apps for Energy Challenge Participant Sector: Energy Resource Type: Application prototype User Interface: Website, Mobile Device Website: ikehu.cloudapp.net/Drive OpenEI Keyword(s): Challenge Generated, Green Button Apps Language: English References: Apps for Energy[1] The DRIVE(tm) System is a patent-pending solution that provides incentives to residential customers to reduce power consumption during peak and critical peak times. It rewards desired consumer behavior with points or airline miles. The DRIVE(tm) System is a patent-pending solution that provides incentives to residential customers to reduce power consumption during peak and

405

Driving Membrane Curvature | Advanced Photon Source  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Unlocking the Nanoscale Secrets of Bird-Feather Colors Unlocking the Nanoscale Secrets of Bird-Feather Colors An Unlikely Route to Ferroelectricity How to Make a Splash Pressure-Tuning the Quantum Phase Transition in a Model 2-D Magnet Reappearing Superconductivity Surprises Scientists Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Driving Membrane Curvature JUNE 14, 2012 Bookmark and Share Model of conformational change in the HIV gp41 fusion protein induced by cholesterol composition of lipid monolayers. In biological systems, membranes are as important as water. They form the barrier between the inner world, within our cells, where we perform the chemical reactions of life, and the outside environment.

406

Direct Drive Systems DDS | Open Energy Information  

Open Energy Info (EERE)

Systems DDS Systems DDS Jump to: navigation, search Name Direct Drive Systems (DDS) Place Cerritos, California Zip CA 90703 Product Manufactures high speed, permanent magnet (PM), high-power motors, generators and power electronics. Coordinates 33.868545°, -118.063704° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.868545,"lon":-118.063704,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

407

Fuel Economy Web Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FuelEconomy.gov Web Services FuelEconomy.gov Web Services Data Description atvtype - alternative fuel or advanced technology vehicle Bifuel (CNG) - Bi-fuel gasoline and compressed natural gas vehicle Bifuel (LPG) - Bi-fuel gasoline and propane vehicle CNG - Compressed natural gas vehicle Diesel - Diesel vehicle EV - Electric vehicle FFV - Flexible fueled vehicle (gasoline or E85) Hybrid - Hybrid vehicle Plug-in Hybrid - Plug-in hybrid vehicle drive - drive axle type 2-Wheel Drive 4-Wheel Drive* 4-Wheel or All-Wheel Drive* All-Wheel Drive* Front-Wheel Drive Part-time 4-Wheel Drive* Rear-Wheel Drive *Prior to Model Year 2010 EPA did not differentiate between All Wheel Drive and Four Wheel Drive salesArea - EPA sales area code. The area of the country where the vehicle can legally be sold. New federally certified vehicles can be sold in all states except California

408

Fault diagnosis and management system for switched reluctance motor drives  

Science Journals Connector (OSTI)

An effective detection and diagnosis of faults is desirable for online condition monitoring, assessment, product quality assurance and improved operational efficiency of Switched Reluctance Motor (SRM) drives. The proposed fault diagnosis and management system uses the measured phase voltages, currents and speed of the motor. In this article, a Matlab/Simulink model-based fault diagnosis system is developed and simulated for SRM drive. The simulation results show that the SRM drive is capable of operating under faulty conditions.

S. Vijayan; S. Paramasivam

2008-01-01T23:59:59.000Z

409

Cooling Tower Energy Conservation Through Hydraulic Fan Drives  

E-Print Network [OSTI]

Fan Drive Eliminates These Problems from the Drive Train. The electric motor is at ground level; close coupled to a hydraulic pump, filters and oil reservoir. Hydraulic lines bring oil flow to the lightweight hydraulic motor mounted at the fan... Tower Fan Drives Are Many: It removes the hazard of costly fan wrecks and shaft coupling breakage. It eliminates gearbox maintenance, breakdown or replacement. The electric motor is mounted with the reservoir and pump at ground level for ease...

Dickerson, J.

410

Hydrogen Pathways: Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Seven Hydrogen Production, Delivery, and Distribution Scenarios  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Pathways: Cost, Hydrogen Pathways: Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Seven Hydrogen Production, Delivery, and Distribution Scenarios Mark Ruth National Renewable Energy Laboratory Melissa Laffen and Thomas A. Timbario Alliance Technical Services, Inc. Technical Report NREL/TP-6A1-46612 September 2009 Technical Report Hydrogen Pathways: Cost, NREL/TP-6A1-46612 Well-to-Wheels Energy Use, September 2009 and Emissions for the Current Technology Status of Seven Hydrogen Production, Delivery, and Distribution Scenarios Mark Ruth National Renewable Energy Laboratory Melissa Laffen and Thomas A. Timbario Alliance Technical Services, Inc. Prepared under Task No. HS07.1002 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393

411

Efficient time-optimal two-corner trajectory planning algorithm for differential-driven wheeled mobile robots with bounded motor control inputs  

Science Journals Connector (OSTI)

Abstract We propose an efficient time-optimal trajectory planning algorithm for differential-driven wheeled mobile robots with bounded motor control inputs in the environment with cranked road where two corners with arbitrary angles exist. Based on dynamics for differential-driven wheeled mobile robots including actuating motors as well as on the bang–bang principle for time-optimality, we plan the time-optimal free path trajectory which unifies path planning and trajectory generation. Thus it improves total time significantly while handling obstacle avoidance. We divide our trajectory into three sections and then divide each section into an appropriate number of subsections to make five subsections in total. We introduce the concept of transition angle to solve the problem with formulating search loops efficiently. Numerical results are provided to validate the effectiveness of the proposed algorithm.

Yunjeong Kim; Byung Kook Kim

2014-01-01T23:59:59.000Z

412

Well-to-Wheels analysis of landfill gas-based pathways and their addition to the GREET model.  

SciTech Connect (OSTI)

Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil fuel input and only minimal GHG emissions (1.5-7.7 kg CO{sub 2}e /MM Btu) on a WTW basis. Thus, LFG-based natural gas can be one of the lowest GHG-emitting fuels for light- or heavy-duty vehicles. This report discusses the size and scope of biomethane resources from landfills and the pathways by which those resources can be turned into and utilized as vehicle fuel. It includes characterizations of the LFG stream and the processes used to convert low-Btu LFG into high-Btu renewable natural gas (RNG); documents the conversion efficiencies and losses of those processes, the choice of processes modeled in GREET, and other assumptions used to construct GREET pathways; and presents GREET results by pathway stage. GREET estimates of well-to-pump (WTP), pump-to-wheel (PTW), and WTW energy, fossil fuel, and GHG emissions for each LFG-based pathway are then summarized and compared with similar estimates for fossil natural gas and petroleum pathways.

Mintz, M.; Han, J.; Wang, M.; Saricks, C.; Energy Systems

2010-06-30T23:59:59.000Z

413

Electrical motor/generator drive apparatus and method  

DOE Patents [OSTI]

The present disclosure includes electrical motor/generator drive systems and methods that significantly reduce inverter direct-current (DC) bus ripple currents and thus the volume and cost of a capacitor. The drive methodology is based on a segmented drive system that does not add switches or passive components but involves reconfiguring inverter switches and motor stator winding connections in a way that allows the formation of multiple, independent drive units and the use of simple alternated switching and optimized Pulse Width Modulation (PWM) schemes to eliminate or significantly reduce the capacitor ripple current.

Su, Gui Jia

2013-02-12T23:59:59.000Z

414

Supercomputers Drive Discovery of Materials for More Efficient...  

Office of Science (SC) Website

Supercomputers Drive Discovery of Materials for More Efficient Carbon Capture Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights...

415

Accelerating the Electrification of U.S. Drive Trains: Ready...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Accelerating the Electrification of U.S. Drive Trains: Ready and Affordable Technology Solutions for Domestically Manufactured Advanced...

416

Electric Drive and Advanced Battery and Components Testbed (EDAB...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Peer Evaluation Meeting vss033carlson2012o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Vehicle Technologies Office...

417

Electric Drive Vehicle Level Control Development Under Various...  

Broader source: Energy.gov (indexed) [DOE]

3 The objective is to develop the entire vehicle thermal management system for two electric drive vehicles (HEVs, PHEVs). Limited battery power and low engine efficiency at...

418

Intelligent design of sensorless Switched reluctance motor drives; -.  

E-Print Network [OSTI]

??The Switched Reluctance Motor SRM drive technology has gone newlinethrough steady and significant development over the last two decades The newlinesimplicity in both motor construction… (more)

Marsaline Beno, M

2014-01-01T23:59:59.000Z

419

Marketing & Driving Demand: Social Media Tools & Strategies- January 16, 2011  

Broader source: Energy.gov [DOE]

January 16, 2011 Conference Call transcript: "Marketing & Driving Demand: Social Media Tools & Strategies," from the U.S. Department of Energy.

420

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...  

Broader source: Energy.gov (indexed) [DOE]

technical targets for these vehicles. Levelized Cost of Driving (LCD) vehicle purchase price + fuel expenditure over 5 years, expressed per mile traveled Analysis Assumptions:...

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Design and Control of High Power Density Motor Drive.  

E-Print Network [OSTI]

??This dissertation aims at developing techniques to achieve high power density in motor drives under the performance requirements for transportation system. Four main factors influencing… (more)

Jiang, Dong

2011-01-01T23:59:59.000Z

422

Watch Energy Secretary Moniz Test Drive the Toyota Mirai  

Broader source: Energy.gov [DOE]

The Energy Department posted a video of ?Secretary Ernest Moniz driving the Toyota Mirai, the first fuel cell electric vehicle (FCEV) for sale in the United States.

423

The Drive for Energy Diversity and Sustainability: The Impact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Diversity and Sustainability: The Impact on Transportation Fuels and Propulsion System Portfolios The Drive for Energy Diversity and Sustainability: The Impact on Transportation...

424

US DRIVE Fuel Cell Technical Team Roadmap | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Technical Team Roadmap US DRIVE Fuel Cell Technical Team Roadmap The Fuel Cell Technical Team (FCTT) conducts the following activities: (1) Reviews and evaluates...

425

Vehicle Technologies Office: U.S. DRIVE 2013 Technical Accomplishments...  

Energy Savers [EERE]

VEAccomplishmentsReport.pdf More Documents & Publications US DRIVE Electrochemical Energy Storage Technical Team Roadmap Progress of DOE Materials, Manufacturing Process R&D, and...

426

An improved energy management strategy for FC/UC hybrid electric vehicles propelled by motor-wheels  

Science Journals Connector (OSTI)

Abstract The hybridization of the fuel-cell electric-vehicle (FCEV) by a second energy source has the advantage of improving the system's dynamic response and efficiency. Indeed, an ultra-capacitor (UC) system used as an energy storage device fulfills the FC slowest dynamics during fast power transitions and recovers the braking energy. In FC/UC hybrid vehicles, the search for a suitable power management approach is one of the main objectives. In this paper, an improved control strategy managing the active power distribution between the two energy sources is proposed. The UC reference power is calculated through the DC link voltage regulation. For the FC power demand, an algorithm with five operating modes is developed. This algorithm, depending on the UC state of charge (SOC) and the vehicle speed level, minimizes the FC power demand transitions and therefore ameliorates its durability. The traction power is provided using two permanent magnetic synchronous motor-wheels to free more space in the vehicle. The models of the FC/UC vehicle system parts and the control strategy are developed using MATLAB software. Simulation results show the effectiveness of the proposed energy management strategy.

Islem Lachhab; Lotfi Krichen

2014-01-01T23:59:59.000Z

427

Driving Demand for Home Energy Improvements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving Demand for Home Energy Improvements Driving Demand for Home Energy Improvements Title Driving Demand for Home Energy Improvements Publication Type Report Year of Publication 2010 Authors Fuller, Merrian C., Cathy Kunkel, Mark Zimring, Ian M. Hoffman, Katie L. Soroye, and Charles A. Goldman Tertiary Authors Borgeson, Merrian Pagination 136 Date Published 09/2010 Publisher LBNL City Berkeley Keywords electricity markets and policy group, energy analysis and environmental impacts department Abstract Policy makers and program designers in the U.S. and abroad are deeply concerned with the question of how to scale up energy efficiency to a level that is commensurate both to the energy and climate challenges we face, and to the potential for energy savings that has been touted for decades. When policy makers ask what energy efficiency can do, the answers usually revolve around the technical and economic potential of energy efficiency-they rarely hone in on the element of energy demand that matters most for changing energy usage in existing homes: the consumer. A growing literature is concerned with the behavioral underpinnings of energy consumption. We examine a narrower, related subject: How can millions of Americans be persuaded to divert valued time and resources into upgrading their homes to eliminate energy waste, avoid high utility bills, and spur the economy? With hundreds of millions of public dollars1 flowing into incentives, workforce training, and other initiatives to support comprehensive home energy improvements2, it makes sense to review the history of these programs and begin gleaning best practices for encouraging comprehensive home energy improvements. Looking across 30 years of energy efficiency programs that targeted the residential market, many of the same issues that confronted past program administrators are relevant today: How do we cost-effectively motivate customers to take action? Who can we partner with to increase program participation? How do we get residential efficiency programs to scale? While there is no proven formula-and only limited success to date with reliably motivating large numbers of Americans to invest in comprehensive home energy improvements, especially if they are being asked to pay for a majority of the improvement costs-there is a rich and varied history of experiences that new programs can draw upon. Our primary audiences are policy makers and program designers-especially those that are relatively new to the field, such as the over 2,000 towns, cities, states, and regions who are recipients of American Reinvestment and Recovery Act funds for clean energy programs. This report synthesizes lessons from first generation programs, highlights emerging best practices, and suggests methods and approaches to use in designing, implementing, and evaluating these programs. We examined 14 residential energy efficiency programs, conducted an extensive literature review, interviewed industry experts, and surveyed residential contractors to draw out these lessons.

428

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect (OSTI)

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

429

Nanotechnology for regenerative medicine  

Science Journals Connector (OSTI)

Future biomaterials must simultaneously enhance tissue regeneration while minimizing immune responses and inhibiting infection. While the field of tissue engineering has promised to develop materials that can pro...

Dongwoo Khang; Joseph Carpenter; Young Wook Chun; Rajesh Pareta…

2010-08-01T23:59:59.000Z

430

Thermal regenerative injector  

SciTech Connect (OSTI)

This patent describes an apparatus for injecting fuel and oxidizer into the combustion zone of an engine, comprising: a housing; means for receiving the fuel within the housing; means for preheating the fuel within the housing; a heat source external to the apparatus; means for transporting the fuel from the housing to the heat source wherein the fuel is heated; means for receiving the heated fuel within the housing; means for receiving the oxidizer within the housing; and means for injecting the oxidizer and the heated fuel from the housing into the combustion zone, the injection means being integral with the housing.

Wagner, W.R.

1987-11-24T23:59:59.000Z

431

Reinforcement learning of ball screw feed drive controllers  

Science Journals Connector (OSTI)

Feedback controllers for ball screw feed drives may provide great accuracy in positioning, but have no close analytical solution to derive the desired controller. Reinforcement Learning (RL) is proposed to provide autonomous adaptation and learning of ... Keywords: Ball screw feed drive, Feedback control, Reinforcement learning

Borja Fernandez-Gauna, Igor Ansoategui, Ismael Etxeberria-Agiriano, Manuel Graña

2014-04-01T23:59:59.000Z

432

Active surge control of centrifugal compressors using drive torque  

E-Print Network [OSTI]

Active surge control of centrifugal compressors using drive torque Jan Tommy Gravdahl , Olav control is presented. A centrifugal compressor driven by an electrical motor is studied, and the drive of centrifugal com- pressors, which occurs when the operating point of the compressor is located to the left

Gravdahl, Jan Tommy

433

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways #  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways # Alain Girault a a Inria the problem of the hybrid control of autonomous vehicles driving on automated highways. Vehicles of their merging lane. Finally, we show the outcome of a highway microsimulation modelled after the Katy Corridor

Girault, Alain

434

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways Alain Girault a aInria Rh of the hybrid control of autonomous vehicles driving on automated highways. Vehicles are autonomous, so they do. Finally, we show the outcome of a highway microsimulation modelled after the Katy Corridor near Houston

Girault, Alain

435

Working on new gas turbine cycle for heat pump drive  

E-Print Network [OSTI]

Working on new gas turbine cycle for heat pump drive FILE COPY TAP By Irwin Stambler, Field Editor, is sized for a 10-ton heat pump system - will be scaled to power a commercial product line ranging from 7 of the cycle- as a heat pump drive for commercial installations. Company is testing prototype gas turbine

Oak Ridge National Laboratory

436

EFFICIENCY AND SCALING OF CURRENT DRIVE AND REFUELLING  

E-Print Network [OSTI]

EFFICIENCY AND SCALING OF CURRENT DRIVE AND REFUELLING BY SPHEROMAK INJEXTIQN INTO A TOKAMAK M ABSTRACT. The first measurements of current drive (refluxing) and refuelling by spheromak injection injection, and refuelling is attributed to the rapid incorporation of the dense spheromak plasma

Brown, Michael R.

437

Does economic development drive the fertility rebound in OECD countries?  

E-Print Network [OSTI]

1 Does economic development drive the fertility rebound in OECD countries? Angela Luci, Olivier Thévenon 167 2010 #12;2 #12;3 Does economic development drive the fertility rebound in OECD countries.thevenon@ined.fr We examine how far changes in fertility trends are related to ongoing economic development in OECD

Paris-Sud XI, Université de

438

CARRIER BASED PWM-VSI DRIVES IN THE OVERMODULATION REGION  

E-Print Network [OSTI]

CARRIER BASED PWM-VSI DRIVES IN THE OVERMODULATION REGION By Ahmet M. Hava A dissertation submitted in motor drive and other three-phase power conversion applications as voltage current sources the inverter energy e ciency, waveform quality, and voltage linearity. However, the dependence

Hava, Ahmet

439

The Matrix Converter Drive Performance Under Abnormal Input Voltage Conditions  

E-Print Network [OSTI]

that generates variable magnitude variable frequency output voltage from the ac utility line. It has high power voltage disturbance related performance issues of the MC drive. Since the MC is a direct frequencyThe Matrix Converter Drive Performance Under Abnormal Input Voltage Conditions Jun-Koo Kang

Hava, Ahmet

440

Cultural selection drives the evolution of human communication systems  

Science Journals Connector (OSTI)

...Cultural selection drives the evolution of...mechanisms that drive this evolution are...population, the frequencies of different variants...control and manipulate variables of interest, experiments...examined. type variable no. levels levels...Histograms showing the frequency of different levels...

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Advanced insulated gate bipolar transistor gate drive  

DOE Patents [OSTI]

A gate drive for an insulated gate bipolar transistor (IGBT) includes a control and protection module coupled to a collector terminal of the IGBT, an optical communications module coupled to the control and protection module, a power supply module coupled to the control and protection module and an output power stage module with inputs coupled to the power supply module and the control and protection module, and outputs coupled to a gate terminal and an emitter terminal of the IGBT. The optical communications module is configured to send control signals to the control and protection module. The power supply module is configured to distribute inputted power to the control and protection module. The control and protection module outputs on/off, soft turn-off and/or soft turn-on signals to the output power stage module, which, in turn, supplies a current based on the signal(s) from the control and protection module for charging or discharging an input capacitance of the IGBT.

Short, James Evans (Monongahela, PA); West, Shawn Michael (West Mifflin, PA); Fabean, Robert J. (Donora, PA)

2009-08-04T23:59:59.000Z

442

Base drive and overlap protection circuit  

DOE Patents [OSTI]

An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Gritter, David J. (Southfield, MI)

1983-01-01T23:59:59.000Z

443

Driving Transformation to Energy Efficient Buildings:Policies and Actions |  

Open Energy Info (EERE)

Driving Transformation to Energy Efficient Buildings:Policies and Actions Driving Transformation to Energy Efficient Buildings:Policies and Actions Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Driving Transformation to Energy Efficient Buildings:Policies and Actions Agency/Company /Organization: Johnson Controls Sector: Climate, Energy Focus Area: Energy Efficiency Topics: Implementation, Policies/deployment programs Resource Type: Publications Website: www.institutebe.com/ Cost: Free Driving Transformation to Energy Efficient Buildings:Policies and Actions Screenshot References: Driving Transformation to Energy Efficient Buildings:Policies and Actions[1] "The aim of this paper is to review policy options available for policymakers in developing countries that can accelerate energy efficiency improvements in the built environment and track results over time. It

444

Thanksgiving Goodwill: West Valley Demonstration Project Food Drive  

Broader source: Energy.gov (indexed) [DOE]

Thanksgiving Goodwill: West Valley Demonstration Project Food Drive Thanksgiving Goodwill: West Valley Demonstration Project Food Drive Provides 640 Turkeys to People in Need Thanksgiving Goodwill: West Valley Demonstration Project Food Drive Provides 640 Turkeys to People in Need November 26, 2013 - 12:00pm Addthis Volunteers from West Valley Demonstration Project gather before distributing items collected in an annual food drive. Volunteers from West Valley Demonstration Project gather before distributing items collected in an annual food drive. Volunteer John Schelble helps unload a delivery truck at a food pantry. Volunteer John Schelble helps unload a delivery truck at a food pantry. John Rizzo passes canned food to John Rendall to deliver to a food pantry. John Rizzo passes canned food to John Rendall to deliver to a food pantry.

445

Test Drive: Honda FCX Clarity | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity May 14, 2010 - 10:52am Addthis A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal Paul Lester Communications Specialist for the Office of Energy Efficiency and Renewable Energy Stepping into the driver's seat of the hydrogen powered Honda FCX Clarity is like stepping into the future. A glowing blue 3-D dashboard displays hydrogen and battery levels and a power button fires up fuel cells that provide electricity. An advanced braking system warns the driver about

446

Do You Drive a Hybrid Electric Vehicle? | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Do You Drive a Hybrid Electric Vehicle? Do You Drive a Hybrid Electric Vehicle? Do You Drive a Hybrid Electric Vehicle? July 9, 2009 - 1:34am Addthis In Tuesday's entry, Francis X. Vogel from the Wisconsin Clean Cities coalition told us about his plug-in hybrid electric vehicle (PHEV). He's one of the lucky few in the United States to drive one of these vehicles because factory-made PHEV's are not yet available to the public. Regular hybrid electric vehicles, however, are widely available and seem to be more and more common on the roads. Do you drive a hybrid electric vehicle? Please share your experience with it in the comments. Each Thursday, you have the chance to share your thoughts on a topic related to energy efficiency or renewable energy for consumers. Please comment with your answers, and also feel free to respond to other comments.

447

Test Drive: Honda FCX Clarity | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity May 14, 2010 - 10:52am Addthis A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal Paul Lester Communications Specialist, Office of Energy Efficiency and Renewable Energy Stepping into the driver's seat of the hydrogen powered Honda FCX Clarity is like stepping into the future. A glowing blue 3-D dashboard displays hydrogen and battery levels and a power button fires up fuel cells that provide electricity. An advanced braking system warns the driver about

448

Gift tag drive benefits local children and seniors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Gift Tag Drive Gift Tag Drive Community Connections: Our link to Northern New Mexico Communities Latest Issue:Dec. 2013 - Jan. 2014 All Issues » submit Gift tag drive benefits local children and seniors Each year, Lab employees and contractors work to make the holidays brighter for local children and seniors through its Holiday Gift Tag drive. January 1, 2013 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Individuals identified through regional nonprofit social-welfare organizations indicate what presents might make their holidays happier, and that information is transcribed onto gift tags. Each year, Lab employees and contractors work to make the holidays brighter for local children and seniors through its Holiday Gift Tag drive.

449

Stabilization of unstable periodic orbits in dc drives  

E-Print Network [OSTI]

Electric drive using dc shunt motor or permanent magnet dc (PMDC) motor as prime mover exhibits bifurcation and chaos. The characteristics of dc shunt and PMDC motors are linear in nature. These motors are controlled by pulse width modulation (PWM) technique with the help of semiconductor switches. These switches are nonlinear element that introduces nonlinear characteristics in the drive. Any nonlinear system can exhibit bifurcation and chaos. dc shunt or PMDC drives show normal behavior with certain range of parameter values. It is also observed that these drive show chaos for significantly large ranges of parameter values. In this paper we present a method for controlling chaos applicable to dc shunt and PMDC drives. The results of numerical investigation are presented.

Krishnendu Chakrabarty; Urmila Kar

2014-02-22T23:59:59.000Z

450

Well-to-wheels analysis of energy use and greenhouse gas emissions of plug-in hybrid electric vehicles.  

SciTech Connect (OSTI)

Plug-in hybrid electric vehicles (PHEVs) are being developed for mass production by the automotive industry. PHEVs have been touted for their potential to reduce the US transportation sector's dependence on petroleum and cut greenhouse gas (GHG) emissions by (1) using off-peak excess electric generation capacity and (2) increasing vehicles energy efficiency. A well-to-wheels (WTW) analysis - which examines energy use and emissions from primary energy source through vehicle operation - can help researchers better understand the impact of the upstream mix of electricity generation technologies for PHEV recharging, as well as the powertrain technology and fuel sources for PHEVs. For the WTW analysis, Argonne National Laboratory researchers used the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed by Argonne to compare the WTW energy use and GHG emissions associated with various transportation technologies to those associated with PHEVs. Argonne researchers estimated the fuel economy and electricity use of PHEVs and alternative fuel/vehicle systems by using the Powertrain System Analysis Toolkit (PSAT) model. They examined two PHEV designs: the power-split configuration and the series configuration. The first is a parallel hybrid configuration in which the engine and the electric motor are connected to a single mechanical transmission that incorporates a power-split device that allows for parallel power paths - mechanical and electrical - from the engine to the wheels, allowing the engine and the electric motor to share the power during acceleration. In the second configuration, the engine powers a generator, which charges a battery that is used by the electric motor to propel the vehicle; thus, the engine never directly powers the vehicle's transmission. The power-split configuration was adopted for PHEVs with a 10- and 20-mile electric range because they require frequent use of the engine for acceleration and to provide energy when the battery is depleted, while the series configuration was adopted for PHEVs with a 30- and 40-mile electric range because they rely mostly on electrical power for propulsion. Argonne researchers calculated the equivalent on-road (real-world) fuel economy on the basis of U.S. Environmental Protection Agency miles per gallon (mpg)-based formulas. The reduction in fuel economy attributable to the on-road adjustment formula was capped at 30% for advanced vehicle systems (e.g., PHEVs, fuel cell vehicles [FCVs], hybrid electric vehicles [HEVs], and battery-powered electric vehicles [BEVs]). Simulations for calendar year 2020 with model year 2015 mid-size vehicles were chosen for this analysis to address the implications of PHEVs within a reasonable timeframe after their likely introduction over the next few years. For the WTW analysis, Argonne assumed a PHEV market penetration of 10% by 2020 in order to examine the impact of significant PHEV loading on the utility power sector. Technological improvement with medium uncertainty for each vehicle was also assumed for the analysis. Argonne employed detailed dispatch models to simulate the electric power systems in four major regions of the US: the New England Independent System Operator, the New York Independent System Operator, the State of Illinois, and the Western Electric Coordinating Council. Argonne also evaluated the US average generation mix and renewable generation of electricity for PHEV and BEV recharging scenarios to show the effects of these generation mixes on PHEV WTW results. Argonne's GREET model was designed to examine the WTW energy use and GHG emissions for PHEVs and BEVs, as well as FCVs, regular HEVs, and conventional gasoline internal combustion engine vehicles (ICEVs). WTW results are reported for charge-depleting (CD) operation of PHEVs under different recharging scenarios. The combined WTW results of CD and charge-sustaining (CS) PHEV operations (using the utility factor method) were also examined and reported. According to the utility factor method, the share of vehicle miles trav

Elgowainy, A.; Han, J.; Poch, L.; Wang, M.; Vyas, A.; Mahalik, M.; Rousseau, A.

2010-06-14T23:59:59.000Z

451

Effect of ninety degree elbow on the accuracy of a non-magnetic, insertion paddle wheel flowmeter  

SciTech Connect (OSTI)

Monitoring energy use in commercial and institutional buildings often requires measurement of chilled and hot water. For retrofit applications, insertion flowmeters are an economical alternative to fixed flow meters such as orifices or venturi meters. The insertion flow meters can be hot tapped into the piping without having to shut down operations. A major problem encountered in retrofit applications of flow meters is finding a location in a pipe where there is at least 10 to 15 diameters of straight pipe. Piping in buildings is constrained by the layout and design of the building, there may only be short runs of straight pipe where flowmeters can be installed. The purpose of this study was to quantify the measurement error caused by installation of flow meter downstream of a 90 degree elbow. The flowmeter was an insertion type, nonmagnetic, paddle wheel flow meter. Meter locations from 2.1 to 9.8 diameters downstream of a 90 degree elbow were studied in a 0.1 in diameter pipe for flow velocities ranging from 0.3 to 3 m/s. At each location downstream of the elbow, the meter was also rotated in 45 increments (from 0 to 180{degree}) around the circumference of the pipe to evaluate choice of circumferential location on flow error. Output from the flowmeter was compared to results obtained with load cells on a 38 m{sup 3} tank that collected the flow pumped through the test section. Results were presented in terms of percent error relative to the load cells as a function of downstream location, circumferential rotation angle, and velocity. The largest errors occurred at 2.1 diameters downstream of the elbow and 180 degree rotation angle. Velocity of the water appeared to have little influence on the results for velocities ranging from 0.3 to 3 m/s. Uncertainty results for all major measurement points are also presented.

Parker, B.; O`Neal, D.L. [Texas A and M Univ., College Station, TX (United States). Dept. of Mechanical Engineering

1995-11-01T23:59:59.000Z

452

Base drive circuit for a four-terminal power Darlington  

DOE Patents [OSTI]

A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

1983-01-01T23:59:59.000Z

453

Fast-Wave Current Drive in a Toroidal Plasma  

Science Journals Connector (OSTI)

Fast-wave current drive is demonstrated in the Princeton ACT-I toroidal device. The fast Alfvén wave, in the range of high ion-cyclotron harmonics, produced 40 A of current from 1 kW of rf power coupled into a plasma by a fast-wave loop antenna. This wave excites a steady current by damping on the energetic tail of the electron distribution function in the same way as lower-hybrid current drive, except that fast-wave current drive is appropriate for higher plasma densities.

J. Goree; M. Ono; P. Colestock; R. Horton; D. McNeill; H. Park

1985-10-14T23:59:59.000Z

454

Is it Cost-Effective to Replace Old Eddy-Current Drives? | Department...  

Broader source: Energy.gov (indexed) [DOE]

Is it Cost-Effective to Replace Old Eddy-Current Drives? Is it Cost-Effective to Replace Old Eddy-Current Drives? New pulse-width-modulated (PWM) adjustable speed drives (ASDs) may...

455

Power control of dual-motor electric drive for tracked vehicles  

Science Journals Connector (OSTI)

The fundamental problem of the power control for the driving of a dual-motor drive electric tracked vehicle is analyzed. The tracked vehicle and its electric drive system are mathematically modeled. Power control...

Yuan Zou; Chengning Zhang; Fengchun Sun…

2010-03-01T23:59:59.000Z

456

Interactions between Electric-drive Vehicles and the Power Sector in California  

E-Print Network [OSTI]

2007) Impacts of Electric-drive Vehicles on California'sInteractions between electric-drive vehicles and the powerin emissions found for electric- drive vehicles is a result

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2009-01-01T23:59:59.000Z

457

Simulation Evaluation of Green Driving Strategies Based on Inter-Vehicle Communications  

E-Print Network [OSTI]

green driving strategies for different market penetration rates and communicationGreen Driving Strategies Based on Inter-Vehicle CommunicationsGREEN DRIVING STRATEGIES BASED ON INTER-VEHICLE COMMUNICATIONS

Yang, Hao; Yuan, Daji; Jin, W L; Saphores, Jean-Daniel M

2010-01-01T23:59:59.000Z

458

Characterizing the acoustic noise generated by hard disk drives and a scheme for detecting noisy hard drives  

E-Print Network [OSTI]

of the requirements for the degree of MASTER OF SCIENCE August 1992 Major Subject: Electrical Engineering s nah7 CHARACTERIZING THE ACOUSTIC NOISE GENERATED BY HARD DISK DRIVES AND A SCHEME FOR DETECTING NOISY HARD DRIVES A Thesis by SEUK BO KIM Approved... 48 48 49 52 53 55 APPENDIX A 58 VITA LIST OF TABLES TABLE Page I Disk Drive Sample Set 16 II Subjective Human Response: Original Noise 22 IH Leq Measured by MIC1 IV Leq Measured by ACC V Leq Grouping of Tv o Sensors 24 26 26 VI...

Kim, Seuk Bo

1992-01-01T23:59:59.000Z

459

Driving on "Green" Electrons | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Driving on "Green" Electrons Driving on "Green" Electrons Driving on "Green" Electrons September 6, 2011 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program So you've decided you want to drive on electricity. You've considered your commute, how often you could plug in your car, and whether you want a plug-in hybrid electric (PHEV) or all-electric vehicle (EV) . But you have one more decision to make - your electricity source. Although electricity is cleaner than petroleum once it gets to your car, not all electricity is created equal. Greenhouse gases that contribute to climate change and smog-forming emissions can come from two different sources in cars - the vehicle's tailpipe and the production of the fuel. The total of these sources is the

460

Driving Home to a Clean Energy Future | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Driving Home to a Clean Energy Future Driving Home to a Clean Energy Future Driving Home to a Clean Energy Future June 7, 2011 - 10:57am Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy Working here at the Department of Energy, I hear a lot about the latest efforts to design and build vehicles for a more energy-efficient future. The clean energy innovations in vehicle technologies that DOE and its partners are advancing will help American families save money at the pump-or even allow them to quit the gas pump altogether. Today, I want to highlight a few of the recent developments that will encourage drivers to be smarter consumers, help industry leaders make the cars and trucks we drive more energy efficient, and allow us to spend less of our hard-earned

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Cruising to Energy Savings This Summer Driving Season | Department of  

Broader source: Energy.gov (indexed) [DOE]

Cruising to Energy Savings This Summer Driving Season Cruising to Energy Savings This Summer Driving Season Cruising to Energy Savings This Summer Driving Season May 11, 2010 - 7:30am Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy My dad is obsessed with fuel efficiency. I joked with him on a recent road trip that when he retires, he'll have more time to pursue his dream career as a fuel-economy promoter. Well guess what, I just found the treasure trove of information on smart driving that's going to make his whole week-it's at fueleconomy.gov. Now, I know we've blogged on this in the past. But it's been a while, and this stuff is good to keep fresh in your mind as the price of gasoline creeps up this summer. The site provides information on everything

462

EA-1851: Delphi Automotive Systems Electric Drive Vehicle Battery and  

Broader source: Energy.gov (indexed) [DOE]

EA-1851: Delphi Automotive Systems Electric Drive Vehicle Battery EA-1851: Delphi Automotive Systems Electric Drive Vehicle Battery and Component Manufacturing Initiative EA-1851: Delphi Automotive Systems Electric Drive Vehicle Battery and Component Manufacturing Initiative Summary This EA evaluates the environmental impacts of a proposal to provide a financial assistance grant under the American Recovery and Reinvestment Act of 2009 (ARRA) to Delphi Automotive Systems, Limited Liability Corporation (LLC) (Delphi). Delphi proposes to construct a laboratory referred to as the "Delphi Kokomo, IN Corporate Technology Center" (Delphi CTC Project) and retrofit a manufacturing facility. The project would advance DOE's Vehicle Technology Program through manufacturing and testing of electric-drive vehicle components as well as assist in the

463

MHK Technologies/Anaconda bulge tube drives turbine | Open Energy  

Open Energy Info (EERE)

Anaconda bulge tube drives turbine Anaconda bulge tube drives turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Anaconda bulge tube drives turbine.jpg Technology Profile Primary Organization Checkmate SeaEnergy Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description Anaconda uses a large water filled distensible rubber tube floating just beneath the ocean surface and oriented parallel to wave direction As a wave passes the bulge tube is lifted with the surrounding water and this causes a bulge wave to be excited which then passes down the tubes walls gathering energy from the ocean wave as it passes By matching the speed of the bulge wave to that of the sea wave resonance is achieved and high power capture becomes possible The bulge waves are then used to drive a turbine generator located at the stern of the device

464

EcoCar Drives Students to Innovate | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

EcoCar Drives Students to Innovate EcoCar Drives Students to Innovate EcoCar Drives Students to Innovate October 26, 2010 - 5:21pm Addthis EcoCar Drives Students to Innovate Shannon Brescher Shea Communications Manager, Clean Cities Program Last year, Americans used about 138 billion gallons of gasoline - mostly imported - for transportation, costing Americans about $300 billion. The Department of Energy, through the Recovery Act, is investing in more fuel-efficient battery and electric vehicles to reduce these costs and training a strong, talented workforce to develop these cleaner, more sustainable technologies. Recognizing the importance of engaging students in this endeavor, the Department of Energy and General Motors (GM) established the EcoCar Challenge - a three-year Advanced Vehicle

465

OpenXC sample driving data | OpenEI Community  

Open Energy Info (EERE)

OpenXC sample driving data OpenXC sample driving data Home > Groups > Developer Rmckeel's picture Submitted by Rmckeel(297) Contributor 24 September, 2012 - 10:29 OpenXC This file represents raw data from OpenXC, in the form of single-vehicle trace files. This may be accessed from any programming language or existing system you want, but a Python wrapper will soon be made available and linked to OpenEI's energy hackathon resources. A description of the format for each individual measurement: http://openxcplatform.com/vehicle-interface/output-format.html A description of the trace files (including the driving.txt file), which is simple a list of individual measurements with timestamps: http://openxcplatform.com/android/testing.html Note: when this sample data forms a more complete dataset of real driving

466

Driving for $1.14 Per Gallon | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Driving for $1.14 Per Gallon Driving for $1.14 Per Gallon Driving for $1.14 Per Gallon June 11, 2013 - 7:30am Addthis News Media Contact (202) 586-4940 WASHINGTON - The Energy Department today launched the eGallon - a quick and simple way for consumers to compare the costs of fueling electric vehicles vs. driving on gasoline. Today's national average eGallon price is about $1.14, meaning that a typical electric vehicle could travel as far on $1.14 worth of electricity as a similar vehicle could travel on a gallon of gasoline. "Consumers can see gasoline prices posted at the corner gas station, but are left in the dark on the cost of fueling an electric vehicle. The eGallon will bring greater transparency to vehicle operating costs, and help drivers figure out how much they might save on fuel by choosing an

467

EV Everywhere Workshop: Traction Drive Systems Breakout Group Report  

Broader source: Energy.gov [DOE]

Presentation given at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

468

Current Drive by Alfvén Waves in Elongated Cross Section Tokamak  

Science Journals Connector (OSTI)

In this paper, an attempt is made to clarify some general aspects of the Alfvén current drive problem for magnetic traps. For large aspect ratio tokamaks, with an elongated cross-section, some general formulas...

V. Tsypin; A. Elfimov; M. Ttendler; F. Nekrasov…

1997-01-01T23:59:59.000Z

469

US DRIVE Vehicle Systems and Analysis Technical Team Roadmap  

Broader source: Energy.gov [DOE]

VSATT provides the analytic support and subsystem characterizations that guide technology and system selections and assist U.S. DRIVE Technical Teams in determining performance goals and validation metrics.

470

A model for LED spectra at different drive currents  

Science Journals Connector (OSTI)

A mathematical model for the spectra of monocolor light-emitting diodes (LEDs) and phosphor-coated white LEDs at different drive currents is established. The simulation program of the...

He, Guoxin; Zheng, Lihong

2010-01-01T23:59:59.000Z

471

Drive Cycle Analysis, Measurement of Emissions and Fuel Consumption...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Drive Cycle Analysis, Measurement of Emissions and Fuel Consumption of a PHEV School Bus Preprint Robb Barnitt and Jeff Gonder To be presented at the SAE 2011 World Congress...

472

Assistive listening devices drive neuroplasticity in children with dyslexia  

Science Journals Connector (OSTI)

Assistive listening devices drive neuroplasticity in children...typically developing peers. Assistive listening devices (classroom FM systems) may reduce...show these effects. Assistive listening devices can improve the neural representation of...

Jane Hornickel; Steven G. Zecker; Ann R. Bradlow; Nina Kraus

2012-01-01T23:59:59.000Z

473

Electric drive systems in compressor stations with stochastic perturbations  

Science Journals Connector (OSTI)

Electric-drive operation in compressor stations for gas-transport systems is considered. Principles of organization ... proposed, so as to ensure that the gas-pumping equipment and the systems for air cooling of ...

O. V. Kryukov

2013-03-01T23:59:59.000Z

474

Fact #797: September 16, 2013 Driving Ranges for Electric Vehicles  

Broader source: Energy.gov [DOE]

The figure below shows the Environmental Protection Agency (EPA) driving ranges for electric vehicles (EVs) offered for the 2013 model year (MY). The Tesla Model S has the longest range of any EV...

475

EV Everywhere Grand Challenge Introduction for Electric Drive Workshop  

Broader source: Energy.gov [DOE]

Presentation given by EERE Assistant Secretary David Danielson at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

476

Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems  

Broader source: Energy.gov [DOE]

The Vehicle Technologies Office (VTO) is working to lower the cost and increase the convenience of electric drive vehicles, which include hybrid and plug-in electric vehicles. These vehicles use...

477

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework  

Broader source: Energy.gov [DOE]

Presentation given by Vehicle Technologies Office analyst Jake Ward at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

478

Wavelet analysis of electric adjustable speed drive waveforms  

SciTech Connect (OSTI)

The three most common adjustable speed drives (ASDs) used in HVAC equipment, namely, pulse-width modulated (PWM) induction drive, brushless-dc drive, and switched-reluctance drive, generate non-periodic and nonstationary electric waveforms with sharp edges and transients. Deficiencies of Fourier transform methods in analysis of such ASD waveforms prompted an application of the wavelet transform. Results of discrete wavelet transform (DWT) analysis of PWM inverter-fed motor waveforms are presented. The best mother wavelet for analysis of the recorded waveforms is selected. Data compression properties of the selected mother wavelet are compared to those of the fast Fourier transform (FFT). Multilevel feature detection of ASD waveforms using the DWT is shown.

Czarkowski, D. [Polytechnic Univ., Brooklyn, NY (United States). Dept. of Electrical Engineering; Domijan, A. Jr. [Univ. of Florida, Gainesville, FL (United States). Dept. of Electrical and Computer Engineering

1998-10-01T23:59:59.000Z

479

Improving Motor and Drive System Performance – A Sourcebook for Industry  

Broader source: Energy.gov [DOE]

This sourcebook outlines opportunities to improve motor and drive systems performance, including practical guidelines, energy efficiency assessment instructions, and referrals to other information and assistance such as software, videos, and training opportunities.

480

Innovation incentives and competition in the hard disk drive industry  

E-Print Network [OSTI]

Firms in the hard disk drive industry are continually engaging in R & D and improving the quality of their products. We explore various determinants of the product innovation incentives for firms concerned with both their ...

Wu, Xiaohua Sherry

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive regenerative" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Microsoft Word - Lin_flow_drive_v2.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Method for Driving Flows in Plasmas Demonstrated Plasma flows, driven by mode-converted waves in the ion-cyclotron range of frequencies, have been demonstrated for the first time....

482

A cloud-assisted design for autonomous driving  

E-Print Network [OSTI]

This paper presents Carcel, a cloud-assisted system for autonomous driving. Carcel enables the cloud to have access to sensor data from autonomous vehicles as well as the roadside infrastructure. The cloud assists autonomous ...

Suresh Kumar, Swarun

483

Driving tissue morphogenetic cascades using tunable nanolayered surface coatings  

E-Print Network [OSTI]

Harnessing the synergy between materials at the nanoscale can be a valuable tool in understanding and probing cellular phenomena and in driving specific processes that lead to tissue and organ regeneration and repair. ...

Shah, Nisarg Jaydeep

2014-01-01T23:59:59.000Z

484

Energy Department Announces $19 Million to Drive Down Solar Soft...  

Broader source: Energy.gov (indexed) [DOE]

sources before the end of the decade. Through SunShot, the Department supports efforts by private companies, universities, and national laboratories to drive down the cost of solar...

485

Factors influencing self-drive vacation travellers' length of stay  

Science Journals Connector (OSTI)

The current research investigated the self-drive vacation travel market, examining determinants for demand for accommodations and the effects of external economic changes (e.g., fuel price fluctuation) on tourism. The study analysed data from two government data sources, a special survey module in the National Household Travel Survey which examined long distance trips, and the gas price index from the US Energy Information Administration. The present study compared two mainstream segments of the self-drive vacation market, which are self-drive vacation staying at commercial lodging facilities (SDV-lodging) and self-drive vacation staying at a friend or relative's accommodations (SDV-FR). Using the 2SLS model, the effects of the socio-demographic variables and travel-related variables were tested statistically. Statistical results showed that an endogeneity issue occurred in the SDV-lodging segment, revealing that 2SLS is better than the OLS estimation.

Sangchoul Yi; Jonathon Day; Liping A. Cai

2013-01-01T23:59:59.000Z

486

Variable Frequency Drives: Energy Savings and Impact on Motor Performance  

E-Print Network [OSTI]

Variable frequency drives (VFDs) have found widespread application in recent years. VFDs are valued for their potential to save energy and improve processes. Reliability has improved significantly, but there are still pitfalls to be addressed...

Petro, D.

487

NREL: News Feature - NREL Driving Research on Hydrogen Fuel Cells  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving Research on Hydrogen Fuel Cells March 24, 2014 In this photo, the hose of a hydrogen refueling device forms an arc above two men. In the foreground to the right is the side...

488

Fast Wave Current Drive Modeling in Tokamaks John C. Wright  

E-Print Network [OSTI]

Fast Wave Current Drive Modeling in Tokamaks John C. Wright A DISSERTATION PRESENTED TO THE FACULTY BY THE DEPARTMENT OF ASTROPHYSICAL SCIENCES PRINCETON UNIVERSITY June 1998 #12;c Copyright by John C. Wright, 1998

Wright, John C.

489

Fast Wave Current Drive Modeling in Tokamaks John C. Wright  

E-Print Network [OSTI]

Fast Wave Current Drive Modeling in Tokamaks John C. Wright A Dissertation Presented to the Faculty by the Department of Astrophysical Sciences Princeton University June 1998 #12; c flCopyright by John C. Wright

Wright, John C.

490

Gas Powered Air Conditioning Absorption vs. Engine-Drive  

E-Print Network [OSTI]

the cooling effect of water evaporation to cool a facilities water cooling system while the gas engine drive chiller uses a standard "freon" compressor driven by a gas engine' to provide its cooling. In the absorption chiller, a heat generator boils... for the water in the evaporator section. A pump then moves the dilute solution back to the generator to continue the process. GED chillers are no different than their electric counterparts except an engine drives the compressor instead of an electric motor...

Phillips, J. N.

1996-01-01T23:59:59.000Z

491

A motor drive control system for the Lidar Polarimeter  

E-Print Network [OSTI]

and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30 30 34 34 Design Consideration. The DC Power Amplifier. System Operation. Scan System Alignment... and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30 30 34 34 Design Consideration. The DC Power Amplifier. System Operation. Scan System Alignment...

Leung, Waiming

2012-06-07T23:59:59.000Z

492

Hydrogen Pathways: Updated Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Ten Hydrogen Production, Delivery, and Distribution Scenarios  

SciTech Connect (OSTI)

This report describes a life-cycle assessment conducted by the National Renewable Energy Laboratory (NREL) of 10 hydrogen production, delivery, dispensing, and use pathways that were evaluated for cost, energy use, and greenhouse gas (GHG) emissions. This evaluation updates and expands on a previous assessment of seven pathways conducted in 2009. This study summarizes key results, parameters, and sensitivities to those parameters for the 10 hydrogen pathways, reporting on the levelized cost of hydrogen in 2007 U.S. dollars as well as life-cycle well-to-wheels energy use and GHG emissions associated with the pathways.

Ramsden, T.; Ruth, M.; Diakov, V.; Laffen, M.; Timbario, T. A.

2013-03-01T23:59:59.000Z

493

Secretary Chu to Kick-off the Electric Drive Transportation Associatio...  

Office of Environmental Management (EM)

Kick-off the Electric Drive Transportation Association's Innovation Motorcade Secretary Chu to Kick-off the Electric Drive Transportation Association's Innovation Motorcade April...

494

SunLine Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure...  

Broader source: Energy.gov (indexed) [DOE]

SunLine Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Projects Fact Sheet. SunLine Test Drives Hydrogen Bus:...

495

Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems.  

E-Print Network [OSTI]

??Induction motors and Variable Frequency Drives (VFDs) are widely used in industry to drive machinery trains. However, some mechanical trains driven by VFD-motor systems have… (more)

Han, Xu

2012-01-01T23:59:59.000Z

496

High-resolution diffraction for residual stress determination in the NiCrMoV wheel of an axial compressor for a heavy-duty gas turbine  

Science Journals Connector (OSTI)

The wheel of an axial compressor for a heavy-duty gas turbine has been investigated for residual stresses (RS) evaluation of the teeth-section where SANS measurements have previously been performed. Such a component can contain internal RS, either due to the manufacturing process, or to the operating cycles fatigue. The constitutive material is a NiCrMoV steel to ASTM A 471 (type 2) norms (equivalent to B50A420B10); this material is usually adopted in the manufacturing of forged components for gas turbines. Internal radial and hoop RS have been determined, whose values are under the limit of 200 kPa. Hoop RS, in general, resulted in higher value than the radial ones. The present experiment represents a particularly important step in the RS determination for gas turbine components, since the measurements reveal that the fatigue of the wheel is also a lifetime limiting factor although, in the same technological field, the available data in the actual neutron techniques literature mainly concern turbine buckets.

M Rogante; G Török; G.F Ceschini; L Tognarelli; I Füzesy; L Rosta

2004-01-01T23:59:59.000Z

497

Reinventing the Wheel  

E-Print Network [OSTI]

Broadcast Transcript: You heard it here before though maybe not first: China invented everything. From gunpowder to the wheelbarrow to paper and ink, it was made in China first. Which puts the Chinese in a bind. I mean, ...

Hacker, Randi

2009-10-28T23:59:59.000Z

498

Four wheels good?  

Science Journals Connector (OSTI)

... Thinking along similar lines, the Californian company Aptera recently launched a two-seater electric car (pictured) that it claims has the most energy-efficient and lowest-drag shape that ...

Duncan Graham-Rowe

2008-08-13T23:59:59.000Z

499

The Wheel Turns  

E-Print Network [OSTI]

in the street. IIJim, corne herso I wBnt to telk to yoU.'I Kirk cems over and knelt 8t Spock's feet, resting hL.;) erms on th(:) Vul can IS knee-3 9 end looking up anxiously into his feee. "What is it, Spack? Have I done something '"rang?" "Of course not...

Piacentini, Valerie

1977-01-01T23:59:59.000Z

500

6 - Control systems for AC variable speed drives  

Science Journals Connector (OSTI)

Publisher Summary This chapter explores the control system, embodied in the control circuits. The simplest method of providing auxiliary power to the converter control circuits is from an auxiliary transformer connected to the mains. The primary need for current feedback in general purpose variable speed drives (VSDs) is inverter switching device protection. Various disadvantages of the vector controlled AC drive as compared to a DC drive are discussed in the chapter. The strategy of an AC vector control drive is to calculate the individual current vectors to eventually enable separate control of the flux current and the torque current under all speed and load conditions. The power circuit for a vector converter is almost identical to that used by a variable voltage variable frequency (VVVF) drive. High accuracy motor current feedback is also necessary to provide control of motor torque. DC bus current feedback is suitable for switching device protection and current limiting in most AC VSDs. Analog speed transducers are increasingly being replaced by digital devices, which are more compatible with modern digital control systems.

Malcolm Barnes

2003-01-01T23:59:59.000Z