Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

In-line drivetrain and four wheel drive work machine using same  

DOE Patents [OSTI]

A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

Hoff, Brian (East Peoria, IL)

2008-08-05T23:59:59.000Z

2

Multistage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-drive wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be the best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly conceived AFPM which has a multistage structure and a water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multistage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 215 N{center_dot}m, 1,100 r/min.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering] [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1996-07-01T23:59:59.000Z

3

Wheeling Power Co | Open Energy Information  

Open Energy Info (EERE)

Wheeling Power Co Wheeling Power Co Place Ohio Service Territory West Virginia Website www.aepohio.com Green Button Reference Page www.aep.com/newsroom/news Green Button Committed Yes Utility Id 20521 Utility Location Yes Ownership I NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Transmission Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] Energy Information Administration Form 826[2] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates No Rates Available The following table contains monthly sales and revenue data for Wheeling

4

Development of traction control for front-wheel drive in-wheel motor electric vehicles  

Science Journals Connector (OSTI)

This paper proposes a novel traction control for a front-wheel drive in-wheel motor electric vehicle. The presented vehicle has advantages on high fuel efficiency and cost effectiveness. In order to achieve specific control performance, this study employed a high speed microcontroller as the vehicle's electronic control unit. The anti-skid function based on a reliable traction control kernel is embedded in the system, which can guarantee the steering safety in a slippery and dangerous situation. This study verifies that the traction control based on maximum torque regulation cannot only constrain the slip to improve the longitudinal friction force and lateral friction force, but also provide some information on tyre-road conditions, which can ensure the performance and the effectiveness of two-dimensional motion control. The numerical simulation and demonstration video reveal its effectiveness and feasibility.

Jia-Sheng Hu; Ying-Ruei Huang; Feng-Rung Hu

2012-01-01T23:59:59.000Z

5

Modelling and simulation of the electronic differential system for an electric vehicle with two-motor-wheel drive  

Science Journals Connector (OSTI)

In-wheel-motor drive electric vehicle (EV) is an innovative configuration, in which each wheel is driven individually by an electric motor. It is possible to use an electronic differential (ED) instead of the heavy mechanical differential because of the fast response time of the motor. A new control approach for ED of a two in-wheel-motor drive EV is proposed based on the fuzzy logic control. The fuzzy logic method employs to estimate the slip rate of each wheel considering the complex and non-linear of the system. Consequently, the ED system distributes torque and power to each motor according to requirements. The effectiveness of the control method is validated in the Matlab/Simulink environment. By simulation results, it is demonstrated that the present ED control system is effective on keeping the slip rate within the optimal range and ensuring the stability of the vehicle either on a straight or curvilinear line.

Yan-e Zhao; Jianwu Zhang

2009-01-01T23:59:59.000Z

6

Definition: Water Wheels | Open Energy Information  

Open Energy Info (EERE)

Wheels Wheels Jump to: navigation, search Dictionary.png Water Wheels A water wheel is a large wheel that takes energy in free-flowing or falling water and converts it into a useful form of energy.[1] View on Wikipedia Wikipedia Definition A water wheel is a machine for converting the energy of free-flowing or falling water into useful forms of power, often in a watermill. A water wheel consists of a large wooden or metal wheel, with a number of blades or buckets arranged on the outside rim forming the driving surface. Most commonly, the wheel is mounted vertically on a horizontal axle, but the tub or Norse wheel is mounted horizontally on a vertical shaft. Vertical wheels can transmit power either through the axle or via a ring gear and typically drive belts or gears; horizontal wheels usually directly drive their load.

7

Mechanical front wheel drive tractors: a field performance study  

E-Print Network [OSTI]

are recognized for their f1nancial assistance. The John Deere product Eng1neering Center 1n Waterloo furnished technical assistance and the Dallas Branch of John Deere Company provided the mechanical front wheel dr1ve tractor. DICKEY-john Corporat1on supplied...-Cart was used to provide the same programmed load for each tractor. The 2WD tractor was ballasted with 25 percent of the total static tractor weight on the front wheels. Deere I Company recommend NFWO tractors be ballasted with 40 percent of the total static...

Babacz, William Adam

2012-06-07T23:59:59.000Z

8

Electric Power Controller for Steering Wheel Management in Electric Cars  

E-Print Network [OSTI]

Electric Power Controller for Steering Wheel Management in Electric Cars Vicente Milanés, Joshué-- Autonomous vehicles, Power control, System analysis and design, Intelligent transportation systems. I they are named hydraulic power steering (HPS) systems. If an electric motor is used then they are named electric

Paris-Sud XI, Université de

9

Design of a triple singularity drive for mobile wheeled robots  

E-Print Network [OSTI]

This thesis encompasses the development of a mobile robotic platform using three singularity drive modules. The process begins with a review of other omnidirectional platforms, comparing and contrasting their strengths and ...

Carothers, Jeffrey (Jeffrey W.)

2014-01-01T23:59:59.000Z

10

Energy Upgrade California Drives Demand From Behind the Wheel...  

Energy Savers [EERE]

to set up and break down the exhibit. CCSE's fuel costs have been minimal due to its propane-powered truck and commercial fuel rates. For program administrators considering...

11

Multi-stage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-driven wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be one best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly-conceived AFPM which has multi-stage structure and water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multi-stage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 220 Nm, 1,100 rpm.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

12

Analysis on cogging torque of driving in-wheel motor for electric vehicle  

Science Journals Connector (OSTI)

In order to reduce the torque fluctuation, vibration and acoustic noise of driving in-wheel motor for electric vehicle, this paper researches the generation mechanism and influence factors of cogging torque. Based on energy method and Fourier expansion, an analytical method is proposed to establish the expression of cogging torque, which can express its relation with design parameters. Based on the expression, the match of pole and slot, pole arc coefficient and permanent magnet eccentric distance are analysed and studied. Ansoft software is used to establish a time-varying movement electromagnetic field finite element model, which can compute the cogging torque about the different match of the pole and slot, different pole arc coefficient and different permanent magnet eccentric distance, in order to obtain the change regularity of the corresponding cogging torque. The conformity of the final simulation computation results with the theoretical analysis indicates this method can be used to provide a theoretical basis to make further optimal design of the new driving in-wheel motor and its control system, so as to reduce torque ripple of in-wheel motor.

Qiping Chen; Hongyu Shu; Limin Chen; Bo Chen; Jianhui Du

2012-01-01T23:59:59.000Z

13

Argonne Transportation Technology R&D Center - APRF - Four-wheel Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Four-Wheel Drive Chassis Dynamometer Test Cell Argonne has lead responsibility for a project with the U.S. Department of Energy's (DOE's) Vehicle Technologies Program to conduct emission and energy-efficiency tests on hybrid electric vehicles (HEVs), sport utility vehicles, and advanced technology vehicles. These tests require a state-of-the-art electric four-wheel-drive (4WD) chassis dynamometer in a climate-controlled environment with appropriate controls and instrumentation for highly accurate emissions and fuel measurements. This test cell was built as part of the Advanced Powertrain Research Facility. 4WD Chassis Dynamometer Argonne obtained professional engineering/architectural services to assist with the preliminary design and construction documents for a world-class facility capable of benchmarking and developing the most advanced powertrains for future cars and trucks, and to have equipment ready for SULEV (super ultra low emission vehicle) and a full dilution tunnel for measurements of diesel particulate matter. The total test cell design was approximately 75% completed and the building foundation was finished in November 2000. Major equipment, such as the dynamometer, constant volume sampler, and emission bench, was ordered and built. A grand opening ceremony was held November 15, 2002.

14

Electric Wheel Hub Motor  

Science Journals Connector (OSTI)

Wheel hub motors are an innovative drive concept for electric vehicles where the electric machine and, in some cases, the...

Dipl.-Ing. Michael Grninger; Dipl.-Ing. Felix Horch

2012-02-01T23:59:59.000Z

15

Implications of Driving Patterns on Well-to-Wheel Performance of Plug-in Hybrid Electric Vehicles  

Science Journals Connector (OSTI)

Implications of Driving Patterns on Well-to-Wheel Performance of Plug-in Hybrid Electric Vehicles ... We do not consider other life cycle stages of the vehicles (e.g., manufacturing and end-of-life) or energy supply infrastructure (e.g., facility construction, maintenance, decommissioning, and labor). ... Gaines, L.; Burnham, A.; Rousseau, A.; Santini, D.Sorting through the many total-energy-cycle pathways possible with early plug-in hybrids. ...

Leon Raykin; Heather L. MacLean; Matthew J. Roorda

2012-05-08T23:59:59.000Z

16

A Novel Approach to the Design of an In-Wheel Semi-Anhysteretic Axial-Flux Switched-Reluctance Motor Drive System for Electric Vehicles .  

E-Print Network [OSTI]

??This thesis presents the development of an in-wheel drive system consisting of an axial-flux switched-reluctance motor and a hub suspension. The motor is designed using (more)

Lambert, Tim

2013-01-01T23:59:59.000Z

17

Hard Drive Power Consumption Uncovered Computer Laboratory  

E-Print Network [OSTI]

Hard Drive Power Consumption Uncovered Computer Laboratory Digital Technology Group Anthony Hylick, Andrew Rice, Brian Jones, Ripduman Sohan Motivation Attempts to reduce power consumption have mainly of power consumption and identify the need for a more expressive API between the OS and hardware devices

Cambridge, University of

18

Utilizing the Traction Drive Power Electronics System to Provide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability...

19

The calm before the storm. [Retail wheeling  

SciTech Connect (OSTI)

The right to refuse retail wheeling requests is one of the cornerstones of a utility's monopoly power. Utilities have fought staunchly to preserve it, most recently in preventing retail wheeling from becoming an important issue in the congressional debate over deregulation; the Energy Policy Act of 1992 steered clear of it. For the present, the prohibition of retail wheeling gives utilities enormous power over the retail electric power market. The ability to refuse retail wheeling requests, of course, prevents retail customers from buying power from third parties. This enables a utility to sell retail customers all the power it can generate, at a price that covers its cost plus an allowed return-even if its price exceeds that of power available in the wholesale market. The denial of retail wheeling thus protects a utility's inefficiencies, whose price is ultimately shouldered onto customers through cost-plus electric rates. Allowing retail wheeling would remove the foundation for much of the current monopoly power that utilities enjoy. Third parties could sell power to a utility's retail customers, since the utility would be required to wheel it. Retail customers would be able to bypass the local distribution utility to buy power from the cheapest source available. Market forces would drive pricing rather than the cost-plus ratemaking process. A utility whose electric rates were above market would have to meet the competitive price or lose sales.

Studness, C.M.

1993-05-15T23:59:59.000Z

20

Power threshold for neutral beam current drive  

SciTech Connect (OSTI)

For fully noninductive current drive in tokamaks using neutral beams, there is a power and density threshold condition, setting a minimum value for P{sup 3/2}/n{sup 2}. If this condition is not met, stationary state cannot occur, and a tokamak discharge will collapse. This is a consequence of the coupling between current and electron temperature, or between current drive efficiency and energy confinement time. 4 figs.

Politzer, P.A. (General Atomics, San Diego, CA (USA)); Porter, G.D. (Lawrence Livermore National Lab., CA (USA))

1989-10-02T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Development of an 800-V Electric Car with Rear-Wheel Drive  

Science Journals Connector (OSTI)

Increasing the voltage level in the traction power network is an evident and reasonable development step in producing sporty and powerful electric cars. Therefore, the engineers at AVL are ... with 1200-V IGBT te...

Dr.-Ing. Armin Engstle; Dipl.-Ing. Mathias Deiml

2012-07-01T23:59:59.000Z

22

Columbia Power Technologies, Inc. Deploys its Direct Drive Wave...  

Energy Savers [EERE]

Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy April 9, 2013 - 12:00am...

23

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study  

E-Print Network [OSTI]

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study M. Zeraoulia1 Combustion Engine (ICE) and the electric motor to deliver power in parallel to drive the wheels. Since both the ICE and electric motor are generally coupled to the drive shaft of the wheels via two clutches

Paris-Sud XI, Université de

24

Design and Control of High Power Density Motor Drive.  

E-Print Network [OSTI]

??This dissertation aims at developing techniques to achieve high power density in motor drives under the performance requirements for transportation system. Four main factors influencing (more)

Jiang, Dong

2011-01-01T23:59:59.000Z

25

Design of Efficient In-Wheel Motor for Electric Vehicles  

Science Journals Connector (OSTI)

Abstract This research paper deals with the design and development of an in-wheel motor for electric vehicles. The proposed motor generates a 350-watt power drive with a power source of two 12V batteries. The batteries are connected in series to increase the voltage to 24 volts and 18.23 A. The in-wheel motor is based on the principle of a DC electric motor to drive the vehicle wheels so that the mechanical components of the transmission and the energy loss are minimized. The proposed in-wheel motor has 46 poles, 51 slots and 51 teeth. In addition, the method lowers the maintenance cost. This research work assumes the maximum weight of 70kg and the running speed of 20km/hr. The experiment results show that the output power and efficiency of the in-wheel motor are subject to the variation in input power given that the input voltage remains constant at 25.41 volts. The maximum efficiency of the in-wheel motor of 82.56% is achieved at 2.5 N-m torque. The maximum torque of 6.25 N-m is achieved with the input power of 348.76 watts.

Winai Chanpeng; Prasert Hachanont

2014-01-01T23:59:59.000Z

26

PSI experience with High Power Target Design  

E-Print Network [OSTI]

% Power deposition: 30 / 20 kW/mA #12;Drive motor & permanent-magnet clutch Record of the drive torque for the rotation DC-motorPermanent-magnet clutchBall bearing vacuum air pressure #12;design of graphite wheel-E design p-beam Drive shaft BALL BEARINGS *) Silicon nitride balls Rings and cage silver coated Lifetime 2

McDonald, Kirk

27

Base drive circuit for a four-terminal power Darlington  

DOE Patents [OSTI]

A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

1983-01-01T23:59:59.000Z

28

MHK Technologies/Direct Drive Power Generation Buoy | Open Energy  

Open Energy Info (EERE)

Power Generation Buoy Power Generation Buoy < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Direct Drive Power Generation Buoy.jpg Technology Profile Primary Organization Columbia Power Technologies Inc Technology Resource Click here Wave Technology Type Click here Point Absorber - Floating Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description Direct drive point absorber In 2005 Oregon State University entered into an exclusive license agreement with Columbia Power Technologies to jointly develop a direct drive wave energy conversion device Designed to be anchored 2 5 miles off the Oregon coast in 130 feet of water it uses the rise and fall of ocean waves to generate electricity Mooring Configuration Anchored

29

Power control of dual-motor electric drive for tracked vehicles  

Science Journals Connector (OSTI)

The fundamental problem of the power control for the driving of a dual-motor drive electric tracked vehicle is analyzed. The tracked vehicle and its electric drive system are mathematically modeled. Power control...

Yuan Zou; Chengning Zhang; Fengchun Sun

2010-03-01T23:59:59.000Z

30

Drive train design, construction, and evaluation for a powered cart for third world farmers  

E-Print Network [OSTI]

Recommended Grades for Rural Roads Ve rc e Nax. Sustarne Grade (%) Nax. Gra e (%) 2, 3, a4-wheel tractor/trailer Pickup truck Trucks, & 5-tons Trucks, & 5-tons 4 wheel drive 6 12 12 10 20 10 18 18 15 30 A apte rom Been a er et a Vehicles... remains to determine the feasibility for a large company to take on the project. The design work done to date has stressed simplicity for ease of manufacture and repair in the Third World. The vehicle construction could be a part of a more...

Kittelson, David Andrew

2012-06-07T23:59:59.000Z

31

Power Electronics and Electrical Drives Prof. Dr.-Ing. Joachim Bcker  

E-Print Network [OSTI]

vehiclesElectric vehicles RailCab Power Electronics Switched-mode power supplies High efficiency Drives and Electric Vehicles Power Electronics and Electrical Drives 5 Prof. Dr.-Ing. Joachim BöckerPower Electronics and Electrical Drives Prof. Dr.-Ing. Joachim Böcker Research Topics Mechatronic

Hellebrand, Sybille

32

Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive  

E-Print Network [OSTI]

drive train is modeled and compared to a series hybrid drive train in operation on the EPA Urban is leveraging the intrinsically high power density of the hydraulic energy storage system through optimal enginePaper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel

Li, Perry Y.

33

Power factor correction of an electrical drive system based on multiphase machines  

E-Print Network [OSTI]

Power factor correction of an electrical drive system based on multiphase machines Khoudir MAROUANI_tabache@yahoo.com Abstract--This paper deals with the energy efficiency improvement of an electrical drive which can be used both in wind energy conversion or motor drive applications. A power factor (PF) control scheme

Paris-Sud XI, Université de

34

Turbine Drive Gas Generator for Zero Emission Power Plants  

SciTech Connect (OSTI)

The Vision 21 Program seeks technology development that can reduce energy costs, reduce or eliminate atmospheric pollutants from power plants, provide choices of alternative fuels, and increase the efficiency of generating systems. Clean Energy Systems is developing a gas generator to replace the traditional boiler in steam driven power systems. The gas generator offers the prospects of lower electrical costs, pollution free plant operations, choices of alternative fuels, and eventual net plant efficiencies in excess of 60% with sequestration of carbon dioxide. The technology underlying the gas generator has been developed in the aerospace industry over the past 30 years and is mature in aerospace applications, but it is as yet unused in the power industry. This project modifies and repackages aerospace gas generator technology for power generation applications. The purposes of this project are: (1) design a 10 MW gas generator and ancillary hardware, (2) fabricate the gas generator and supporting equipment, (3) test the gas generator using methane as fuel, (4) submit a final report describing the project and test results. The principal test objectives are: (1) define start-up, shut down and post shutdown control sequences for safe, efficient operation; (2) demonstrate the production of turbine drive gas comprising steam and carbon dioxide in the temperature range 1500 F to 3000 F, at a nominal pressure of 1500 psia; (3) measure and verify the constituents of the drive gas; and (4) examine the critical hardware components for indications of life limitations. The 21 month program is in its 13th month. Design work is completed and fabrication is in process. The gas generator igniter is a torch igniter with sparkplug, which is currently under-going hot fire testing. Fabrication of the injector and body of the gas generator is expected to be completed by year-end, and testing of the full gas generator will begin in early 2002. Several months of testing are anticipated. When demonstrated, this gas generator will be the prototype for use in demonstration power plants planned to be built in Antioch, California and in southern California during 2002. In these plants the gas generator will demonstrate durability and its operational RAM characteristics. In 2003, it is expected that the gas generator will be employed in new operating plants primarily in clean air non-attainment areas, and in possible locations to provide large quantities of high quality carbon dioxide for use in enhanced oil recovery or coal bed methane recovery. Coupled with an emission free coal gasification system, the CES gas generator would enable the operation of high efficiency, non-polluting coal-fueled power plants.

Doyle, Stephen E.; Anderson, Roger E.

2001-11-06T23:59:59.000Z

35

A low?frequency high?power magnetic drive transducer  

Science Journals Connector (OSTI)

Ralph Woollett's contributions to the art and science of sonartransducer design were as a researcher teacher author and reviewer. Of these roles perhaps the most important the one that became his legacy was that of teacher: All of his colleagues were in a sense his pupils. His careful and thorough approach to transducer design problems inspired us to try to meet his high standards and we still miss his insight advice encouragement and criticism. This talk will review Ralph's influence on underwater electroacoustics present some anecdotes about his life and work and examine the circumstances of his death. Finally it will show how Ralph's ideas and design philosophy have affected some of the author's present research specifically the design of a low?frequency high?power magnetic drive transducer having low distortion.

William J. Marshall

1990-01-01T23:59:59.000Z

36

A System for Measuring the Active Power of the Asynchronous Motor of a Lathe Electric Drive  

Science Journals Connector (OSTI)

A system for measuring the active power of the asynchronous motor of a lathe electric drive is described. The possibility of using...

V. A. Kuzovkin; V. V. Filatov; A. N. Porvatov; A. N. Porvatova

2014-05-01T23:59:59.000Z

37

Variable speed drive as an alternative solution for a micro-hydro power plant.  

E-Print Network [OSTI]

?? This diploma work is mainly focused on developing the control strategy for avariable speed drive as an alternative solution to a micro-hydro power plant. (more)

Akhtar, Malik Usman

2012-01-01T23:59:59.000Z

38

A Self-Adjusting Sinusoidal Power Source Suitable for Driving Capacitive Loads  

E-Print Network [OSTI]

-CFPPRI can drive a capacitive load at any frequency within the design range. It will maintain zero voltage Inverter; Variable inductor; Phase comparator; Sinusoidal Power Source. I. INTRODUCTION The favorable drive to the secondary (C1(n2/2n1)2 + C2 + CL). When the gate drive frequency of the CFPPRI, fs, matches the resonant

39

LLCC-PWM Inverter for Driving High-Power Piezoelectric Actuators  

E-Print Network [OSTI]

LLCC-PWM Inverter for Driving High-Power Piezoelectric Actuators Rongyuan Li, Norbert Fröhleke LLCC-PWM inverter is presented for driving ultrasonic high power piezoelectric actuators. The proposed system of a pulse- width modulated inverter and LLCC-type filter is designed in a way to reduce the total

Paderborn, Universität

40

1996 international conference on power electronics, drives and energy systems for industrial growth: Proceedings. Volume 1  

SciTech Connect (OSTI)

This book contains Volume 1 of the proceedings of the IEEE International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth held January, 1996, in New Delhi. The topics of the papers include resonant and soft switching converters, induction motor drives, solar power generation, control aspects of power generation, PWM and DC/DC converters, field oriented control of AC machines, wind power generation, analysis of electrical machines, topology and control of power electronic converters, switched reluctance and permanent magnet motor drives, active filters and VAR compensation schemes, analysis and design of induction generators/motors, simulation of power electronics converters and drive, brushless and special electrical machines, UPS and battery energy storage systems.

Murthy, S.S.; Roy, S. [eds.] [Indian Inst. of Tech., New Delhi (India); Divan, D. [ed.] [Univ. of Wisconsin, Madison, WI (United States); Doradla, S.R. [ed.] [Indian Inst. of Tech., Kanpur (India); Murthy, B.V. [ed.] [General Motors, Detroit, MI (United States)

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Gas Powered Air Conditioning Absorption vs. Engine-Drive  

E-Print Network [OSTI]

the cooling effect of water evaporation to cool a facilities water cooling system while the gas engine drive chiller uses a standard "freon" compressor driven by a gas engine' to provide its cooling. In the absorption chiller, a heat generator boils... for the water in the evaporator section. A pump then moves the dilute solution back to the generator to continue the process. GED chillers are no different than their electric counterparts except an engine drives the compressor instead of an electric motor...

Phillips, J. N.

1996-01-01T23:59:59.000Z

42

Factors driving wind power development in the United States  

E-Print Network [OSTI]

about 1.3 MW of Iowa wind power to supply its Second Natureuse a portion of the wind power to supply customers whosupplies wholesale wind power to four Colorado utilities,

Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

2003-01-01T23:59:59.000Z

43

A 25 KV/10A PULSER FOR DRIVING A HIGH-POWER PIERCE ELECTRON GUN  

E-Print Network [OSTI]

A 25 KV/10A PULSER FOR DRIVING A HIGH-POWER PIERCE ELECTRON GUN J. J. Barroso, J. O. Rossi, H-tube pulser to drive a high-power electron gun. The tube includes a 2.0µF/100kV capacitor bank whose discharge is controlled by a tetrode tube connected to the gun cathode. Typical measured operating parameters are 3

44

EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electric Drive (Power Electric Drive (Power Electronics and Electric Machines) Workshop Tuesday, July 24, 2012 - Doubletree O'Hare, Chicago, IL Event Objective: DOE aims to obtain stakeholder input on the Power Electronics and Electric Machines (PEEM) goals of the EV Everywhere Grand Challenge. This input will advise the aggressive next-generation technology research and development necessary to enable U.S. companies to be the first in the world to produce plug-in electric vehicles (PEVs) that are as affordable and convenient for the average American family as today's gasoline-powered vehicles within the next 10 years. The EV Everywhere Grand Challenge Electric Drive (Power Electronics and Electric Machines) Workshop was attended by senior officials of the Department of Energy and representatives from the following

45

Driving Low-Power Wearable Systems with an Adaptively-Controlled Foot-Strike Scavenging Platform  

E-Print Network [OSTI]

Driving Low-Power Wearable Systems with an Adaptively-Controlled Foot-Strike Scavenging Platform as a means to scavenge energy from foot-strikes and power wearable systems. While they exhibit large energy of foot pressure sensors to realize accurate control of the individual DEs. Statistical techniques

Potkonjak, Miodrag

46

Power Drive Investigation by Spectral Analysis of the Electromagnetic Field Emitted by the  

E-Print Network [OSTI]

. One notes that all the power transit throught the DC bus bar of the inverter [6] [7] [8]. Not onlyPower Drive Investigation by Spectral Analysis of the Electromagnetic Field Emitted by the DC Bus analysis and/or motor current sig- nature analysis (weel known as MCSA). This paper presents a new approach

Boyer, Edmond

47

Harsh medicine. [retail wheeling experiment in Michigan and side effects  

SciTech Connect (OSTI)

Retailing wheeling's harmful side-effects may surface in a Michigan experiment. In the final analysis, the debate over retail wheeling is about whether there will be direct price competition in the electric power industry. Retail wheeling would extend to the electric power market the same freedom of choice among customers that is present elsewhere in the economy. It would provide a mechanism through which competition could enforce an efficient allocation of resources. It also undoubtedly would eliminate most of the huge discrepancies that exist between so many neighboring service areas. It is unlikely that permitting retail wheeling would actually result in much wheeling or loss of load. Utilities will no doubt meet the threat of the loss of load by cutting rates to hold their customers. Hence, the primary effect would be on the pricing of electricity, not the wheeling of power. The retail wheeling experiment under consideration in Michigan can become an important step toward making the utility industry more efficient for the nation and more equitable for ratepayers. Unfortunately, it also is potentially unfair to the utilities involved. A retail wheeling experiment in one state is likely to put those utilities at risk for competitive attack, but is unlikely to give those utilities the countervailing power to use retail wheeling elsewhere to market their power. Fairness and economic efficiency require that retail wheeling exist everywhere, and that is is accessible to utilities as well as non-utilities.

Studness, C.M.

1993-07-15T23:59:59.000Z

48

Better Buildings Neighborhood Program: Energy Upgrade California Drives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Upgrade Energy Upgrade California Drives Demand From Behind the Wheel to someone by E-mail Share Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Facebook Tweet about Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Twitter Bookmark Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Google Bookmark Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Delicious Rank Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on Digg Find More places to share Better Buildings Neighborhood Program: Energy Upgrade California Drives Demand From Behind the Wheel on

49

SDEMPED 2005 -International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives  

E-Print Network [OSTI]

and Drives Vienna, Austria, 7-9 September 2005 Rotor fault detection of electrical machines by low frequencySDEMPED 2005 - International Symposium on Diagnostics for Electric Machines, Power Electronics the reliability of fault detection on electrical machines by analysis of the low frequency magnetic stray field

Paris-Sud XI, Université de

50

A Quantitative Analysis of Disk Drive Power Management in Portable Computers  

E-Print Network [OSTI]

the question of power management begins with an analysis of where the energy is being consumed. Table 1 gives) Percent of Total Display Compaq monochrome lite25c 3.5 68% Disk Drive (105 Mbytes) Maxtor MXL­105 III 1 of inactivity. In this paper, we perform a quantitative analysis of the potential costs and benefits of spinning

Anderson, Tom

51

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2006-01-10T23:59:59.000Z

52

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2003-08-05T23:59:59.000Z

53

Optimal Power Flow Formulation in Market of Retail Wheeling Taiyou Yong, Student Member, IEEE Robert Lasseter, Fellow, IEEE  

E-Print Network [OSTI]

, transmission and distribution in an area. The rate of electricity is regulated. The market is monopoly. Retail. Optimal power flow is an optimizing tool for power system planning, energy management etc. Use Robert Lasseter, Fellow, IEEE Department of Electrical and Computer Engineering, University of Wisconsin

54

E-Print Network 3.0 - atlas big wheel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wheel Search Powered by Explorit Topic List Advanced Search Sample search results for: atlas big wheel Page: << < 1 2 3 4 5 > >> 1 A Slip Model for the Spherical Actuation of the...

55

A NANOCAR WITH FOUR-WHEEL DRIVE  

Science Journals Connector (OSTI)

Because its only a few nanometers long and operates at a chilly 7 K (about 447 F), this little automobile is unlikely to cause any sleepless nights for electric car makers. ...

BETHANY HALFORD

2011-11-14T23:59:59.000Z

56

MHK Projects/OSU Direct Drive Power Generation Buoys | Open Energy  

Open Energy Info (EERE)

OSU Direct Drive Power Generation Buoys OSU Direct Drive Power Generation Buoys < MHK Projects Jump to: navigation, search << Return to the MHK database homepage Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":5,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"500px","height":"350px","centre":false,"title":"","label":"","icon":"File:Aquamarine-marker.png","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.6472,"lon":-124.127,"alt":0,"address":"","icon":"http:\/\/prod-http-80-800498448.us-east-1.elb.amazonaws.com\/w\/images\/7\/74\/Aquamarine-marker.png","group":"","inlineLabel":"","visitedicon":""}]}

57

Performance of electric power meters and analyzers in adjustable-speed drive applications  

SciTech Connect (OSTI)

Electric adjustable-speed drives (ASDs) are increasingly used in heating, ventilating, and air-conditioning (HVAC) equipment due to the energy savings and comfort of operation they offer. Power electronic circuits that are employed in ASDs shape their input and output voltage and current waveforms, making them highly distorted from typical power-grid sinusoids. Accurate measurements of voltage, current, and power under nonsinusoidal conditions are essential for determining the efficiency of an HVAC unit and performing separation of losses between an ASD and an electric motor. That information is invaluable for HVAC equipment designers, manufacturers, and users. Three modern power meters and analyzers were tested to determine their accuracy with various nonsinusoidal waveforms applied. The meters were subjected to waveforms that are produced by the three most common ASD technologies used in air conditioners and heat pumps, namely, PWM induction, DC-brushless, and switched-reluctance drives. The tests were performed under field conditions and in a computer-controlled laboratory environment. The results obtained show that some meters can accurately measure electric power at the input to ASDs. However, the output power of ASDs for DC-brushless and switched-reluctance technology was not measured with acceptable accuracy by any of the tested meters. Possible reasons for meter inaccuracies and suggestions for performance improvement are given.

Czarkowski, D.; Domijan, A. Jr. [Univ. of Florida, Gainesville, FL (United States). Dept. of Electrical and Computer Engineering

1997-12-31T23:59:59.000Z

58

HybriDrive Propulsion System  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HybriDrive HybriDrive ® Propulsion System Cleaner, smarter power for transit DOE/FTA Fuel Cell Research Priorities Workshop Washington, DC 7 June 2010 Bart W. Mancini Sr. Principal Systems Engineer BAE Systems Ph: 607-770-4103 bart.mancini@baesystems.com 2 Overview 3 * BAE Systems FC Experience / Deployments * Technology gaps/barriers to full commercialization of fuel cell buses * Well-to-wheels energy efficiency and emissions * Cost metrics * Bus integration issues * Fuel cell bus R&D needs * Future plans BAE Systems FC Experience / Deployments 4 * 1998 - Georgetown/FTA/DOE Fuel Cell Bus #1 (still serviceable) * UTC 100 kW Phosphoric Acid FC using on-board Methanol Reformate, Hybrid propulsion & Electric accessories * 2000 - Georgetown/FTA/DOE Fuel Cell Bus #2 (retired) *

59

EV Everywhere EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Agenda  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- 7/20/2012 - 7/20/2012 EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Tuesday, July 24, 2012 - Doubletree O'Hare, Chicago, IL Event Objective: DOE aims to obtain stakeholder input on the Power Electronics and Electric Machines (PEEM) goals of the EV Everywhere Grand Challenge. This input will advise the aggressive next- generation technology research and development necessary to enable U.S. companies to be the first in the world to produce plug-in electric vehicles (PEVs) that are as affordable and convenient for the average American family as today's gasoline-powered vehicles within the next 10 years. 8:30-8:35 AM CONTINENTAL BREAKFAST 8:30-8:35 AM CALL TO ORDER Mr. Patrick Davis, DOE EERE Vehicle Technologies Program

60

Electromagnetic analysis and design of in-wheel motor of micro-electric vehicle based on Maxwell  

Science Journals Connector (OSTI)

To obtain a good drivability and high efficiency of the micro-electric vehicle, a new driving in-wheel motor design was analyzed and optimized. Maxwell software ... element simulation model of the driving in-whee...

Qi-ping Chen ???; Hong-yu Shu ???; Kai Ren ??

2012-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Mathematical simulation of wind-wheel aerodynamic performances  

Science Journals Connector (OSTI)

A mathematical model of wind-wheel aerodynamic performances for a wind-power plant is developed. This model makes it possible to both calculate wind turbine performance and recover it for any blade pitch angles.

P. S. Tsgoev

2009-11-01T23:59:59.000Z

62

Interactions between Electric-drive Vehicles and the Power Sector in California  

E-Print Network [OSTI]

2007) Impacts of Electric-drive Vehicles on California'sInteractions between electric-drive vehicles and the powerin emissions found for electric- drive vehicles is a result

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2009-01-01T23:59:59.000Z

63

A concept of power generator using wind turbine, hydrodynamic retarder, and organic Rankine cycle drive  

Science Journals Connector (OSTI)

This paper describes a concept of electric power generating system that uses a wind turbine to generate kinetic energy which converts heat through a hydrodynamic retarder. The heat so generated is utilized to drive an organic Rankine cycle that converts thermal energy into electricity power for continuous and undisrupted supply during the year. A hydrodynamic retarder converts kinetic energy into heat through hot fluid by directing the flow of the fluid into the hydrodynamic retarder in a manner that resists rotation of blades of the wind turbine. The hot fluid circulating in the hydrodynamic retarder is a thermal heat source for vapor regeneration of organic heat exchange fluid mixture(s) used in the Rankine cycle. The expansion of the organic heat exchange fluid gets converted into rotation of the generator rotor.

Samuel Sami

2013-01-01T23:59:59.000Z

64

Power Electronics and Thermal Management Breakout Session  

Broader source: Energy.gov (indexed) [DOE]

drive project HV Battery Torque to Drive Wheels Battery Charger Bi-directional Converter Electric Motor Inverter DC-DC Converter Accessory Loads Vehicle Technologies Program -...

65

Research on the Torque Dynamic Distribution Algorithm of In-Wheel-Motor Electric Vehicle  

Science Journals Connector (OSTI)

This paper focuses on developing the torque dynamic distribution algorithm of In-Wheel-Motor electric vehicle. The algorithm is developed to regulate ... the vehicle body yaw rate by changing the motor drive torq...

Zhengyi He; Yang Ou; Jingming Yuan

2013-01-01T23:59:59.000Z

66

High power millimeter wave experiment of ITER relevant electron cyclotron heating and current drive system  

SciTech Connect (OSTI)

High power, long pulse millimeter (mm) wave experiments of the RF test stand (RFTS) of Japan Atomic Energy Agency (JAEA) were performed. The system consists of a 1 MW/170 GHz gyrotron, a long and short distance transmission line (TL), and an equatorial launcher (EL) mock-up. The RFTS has an ITER-relevant configuration, i.e., consisted by a 1 MW-170 GHz gyrotron, a mm wave TL, and an EL mock-up. The TL is composed of a matching optics unit, evacuated circular corrugated waveguides, 6-miter bends, an in-line waveguide switch, and an isolation valve. The EL-mock-up is fabricated according to the current design of the ITER launcher. The Gaussian-like beam radiation with the steering capability of 20 deg. - 40 deg. from the EL mock-up was also successfully proved. The high power, long pulse power transmission test was conducted with the metallic load replaced by the EL mock-up, and the transmission of 1 MW/800 s and 0.5 MW/1000 s was successfully demonstrated with no arcing and no damages. The transmission efficiency of the TL was 96%. The results prove the feasibility of the ITER electron cyclotron heating and current drive system.

Takahashi, K.; Kajiwara, K.; Oda, Y.; Kasugai, A.; Kobayashi, N.; Sakamoto, K. [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Doane, J.; Olstad, R. [General Atomics, P.O. Box 85608, San Diego, California 92186-5608 (United States); Henderson, M. [ITER Organization, CS90 046, 13067 St. Paul lez Durance Cedex (France)

2011-06-15T23:59:59.000Z

67

Visual estimation of wheel sinkage for rough-terrain mobile robots  

Science Journals Connector (OSTI)

For mobile robots driving across natural terrains, it is critical that the dynamic effects occurring at the wheel-terrain interface be taken into account. One of the most prevalent of these effects is wheel sinkage. Wheels can sink to depths sufficient to prevent further motion, possibly leading to danger of entrapment. This paper presents an algorithm for visual estimation of sinkage. We call it the visual sinkage estimation (VSE) method. It assumes the presence of a monocular camera and an artificial pattern, attached to the wheel side, to determine the terrain contact angle. This paper also introduces an analytical model for wheel sinkage in deformable terrain based on terramechanics. To validate the VSE module, firstly, several tests are performed on a single-wheel test bed, under different operating conditions. Secondly, the effectiveness of the proposed approach is proved in real contexts, employing an all-terrain rover travelling on a sandy beach.

Giulio Reina; Annalisa Milella; Angelo Gentile

2010-01-01T23:59:59.000Z

68

State Transition, Balancing, Station Keeping, and Yaw Control for a Dynamically Stable Single Spherical Wheel Mobile Robot  

E-Print Network [OSTI]

with a four-motor inverse mouse- ball drive, yaw drive, leg drive, control system, and results including present the results and conclusions. II. SYSTEM DESCRIPTION A. Four-Motor Inverse Mouse-Ball Drive Spherical Wheel Mobile Robot Umashankar Nagarajan, Anish Mampetta, George A. Kantor and Ralph L. Hollis

69

Abstract--The increase in use of power electronics in transmission and distribution applications is the driving  

E-Print Network [OSTI]

is the driving force for development of high power devices. Utility applications like FACTS and HVDC require cost and compared for SiC and Si devices. These loss models are integrated with an HVDC transmission system to study of the systems. High Voltage DC (HVDC) transmission and Flexible AC Transmission Systems (FACTS) are the widely

Tolbert, Leon M.

70

EV Everywhere EV Everywhere Grand Challenge- Electric Drive (Power Electronics and Electric Machines) Workshop Agenda  

Broader source: Energy.gov [DOE]

Agenda for the EV Everywhere Grand Challenge - Electric Drive Workshop on July 24, 2012 at the Doubletree O'Hare, Chicago, IL

71

EV Everywhere Grand Challenge- Electric Drive (Power Electronics and Electric Machines) Workshop  

Broader source: Energy.gov [DOE]

List of companies in attendance at the Electric Drive Workshop held on July 24, 2012 at the Doubletree O'Hare, Chicago, IL

72

EV Everywhere: Electric Drive Systems Bring Power to Plug-in Electric Vehicles  

Broader source: Energy.gov [DOE]

Find out how the Energy Department's Vehicles Technologies Office is helping reduce the cost of plug-in electric vehicles through research and development of electric drive technologies.

73

High-Power Converters and AC Drives IEEE PESC2005 Tutorial  

E-Print Network [OSTI]

Overview · MV Drive Applications Industry Application Examples Petrochemical Pipeline pumps, gas protection Self commissioning Minimum down-time for repairs Small footprint N+1 redundancy (optional) Dynamic

Wu, Bin

74

Innovative grinding wheel design for cost-effective machining of advanced ceramics. Phase I, final report  

SciTech Connect (OSTI)

Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics. This program was a cooperative effort involving three Norton groups representing a superabrasive grinding wheel manufacturer, a diamond film manufacturing division and a ceramic research center. The program was divided into two technical tasks, Task 1, Analysis of Required Grinding Wheel Characteristics, and Task 2, Design and Prototype Development. In Task 1 we performed a parallel path approach with Superabrasive metal-bond development and the higher technical risk, CVD diamond wheel development. For the Superabrasive approach, Task 1 included bond wear and strength tests to engineer bond-wear characteristics. This task culminated in a small-wheel screening test plunge grinding sialon disks. In Task 2, an improved Superabrasive metal-bond specification for low-cost machining of ceramics in external cylindrical grinding mode was identified. The experimental wheel successfully ground three types of advanced ceramics without the need for wheel dressing. The spindle power consumed by this wheel during test grinding of NC-520 sialon is as much as to 30% lower compared to a standard resin bonded wheel with 100 diamond concentration. The wheel wear with this improved metal bond was an order of magnitude lower than the resin-bonded wheel, which would significantly reduce ceramic grinding costs through fewer wheel changes for retruing and replacements. Evaluation of ceramic specimens from both Tasks 1 and 2 tests for all three ceramic materials did not show evidence of unusual grinding damage. The novel CVD-diamond-wheel approach was incorporated in this program as part of Task 1. The important factors affecting the grinding performance of diamond wheels made by CVD coating preforms were determined.

Licht, R.H.; Ramanath, S.; Simpson, M.; Lilley, E.

1996-02-01T23:59:59.000Z

75

Northern Power Systems WindPACT Drive Train Alternative Design Study Report: April 12, 2001 to January 31, 2005  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

October 2004 * NREL/SR-500-35524 October 2004 * NREL/SR-500-35524 G. Bywaters, V. John, J. Lynch, P. Mattila, G. Norton, and J. Stowell Northern Power Systems M. Salata General Dynamics Electric Boat O. Labath Gear Consulting Services of Cincinnati A. Chertok and D. Hablanian TIAX Northern Power Systems WindPACT Drive Train Alternative Design Study Report April 12, 2001 to January 31, 2005 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov Operated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy by Midwest Research Institute * Battelle Contract No. DE-AC36-99-GO10337 Revised October 2004 * NREL/SR-500-35524 Northern Power Systems WindPACT Drive Train Alternative Design Study Report

76

Wheel-type magnetic refrigerator  

DOE Patents [OSTI]

The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load. 7 figs.

Barclay, J.A.

1983-10-11T23:59:59.000Z

77

Interactions between Electric-drive Vehicles and the Power Sector in California  

E-Print Network [OSTI]

average peaking natural gas power plant (NGCT) supplies the13 categories. Natural gas- fired power plants comprise over= Combined heat and power; GHG = Greenhouse gas emissions;

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2009-01-01T23:59:59.000Z

78

Rim seal for turbine wheel  

DOE Patents [OSTI]

A turbine wheel assembly includes a disk having a plurality of blades therearound. A ceramic ring is mounted to the housing of the turbine wheel assembly. A labyrinth rim seal mounted on the disk cooperates with the ceramic ring to seal the hot gases acting on the blades from the disk. The ceramic ring permits a tighter clearance between the labyrinth rim seal and the ceramic ring.

Glezer, Boris (Del Mar, CA); Boyd, Gary L. (Alpine, CA); Norton, Paul F. (San Diego, CA)

1996-01-01T23:59:59.000Z

79

The great ``retail wheeling`` illusion, and more productive energy futures  

SciTech Connect (OSTI)

This paper sets out the reasons why many environmental and public interest organizations oppose retail wheeling. Cavanagh argues that retail wheeling would destroy incentives for energy efficiency improvements and renewable energy generation--benefits that reduce long-term energy service costs to society as a whole. The current debate over the competitive restructuring of the electric power industry is critical from both economic and environmental perspectives. All attempts to introduce broad-scale retail wheeling in the United States have failed; instead, state regulators are choosing a path that emphasizes competition and choice, but acknowledges fundamental differences between wholesale and retail markets. Given the physical laws governing the movement of power over centrally controlled grids, the choice offered to customers through retail wheeling of electricity is a fiction -- a re-allocation of costs is all that is really possible. Everyone wants to be able to claim the cheapest electricity on the system; unfortunately, there is not enough to go around. By endorsing the fiction of retail wheeling for certain types of customers, regulators would be recasting the retail electricity business as a kind of commodity exchange. That would reward suppliers who could minimize near-term unit costs of electricity while simultaneously destroying incentives for many investments, including cost-effective energy efficiency improvements and renewable energy generation, that reduce long-term energy service costs to society as a whole. This result, which has been analogized unpersuasively to trends in telecommunications and natural gas regulation, is neither desirable nor inevitable. States should go on saying no to retail wheeling in order to be able to create something better: regulatory reforms that align utility and societal interests in pursuing a least-cost energy future. An appendix contains notes on some recent Retail Wheeling Campaigns.

Cavanagh, R.

1994-12-31T23:59:59.000Z

80

Exploring the practical issues and use of modern power, control and sensing circuitries of a 6/4-pole switched reluctance motor drive  

Science Journals Connector (OSTI)

This paper explores practical issues and use of modern power, control and sensing circuitries of a 6/4-pole Switched Reluctance Motor (SRM) drive. A DSP-based SRM drive system consists of classic bridge converter including power MOSFETs and their gate drivers, freewheeling diodes, sensing circuit, DSP controller and a SRM that is being controlled by the controller. Few logic components are also required that will interface with the DSP for communication. The complete practical issues experienced with modern power, control and sensing circuitries of a 6/4-pole SRM drive is presented.

Shanmugam Paramasivam; R. Arumugam

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

PM brushless DC motor drive with a new power converter topology  

SciTech Connect (OSTI)

With the growing potential for widespread use of permanent magnet brushless dc motor drives (hereafter referred to as PMBDC drives) in many low-cost applications such as in hvac, refrigerators, and freezers in houses and small velocity servos in process industries, it has become important to minimize the cost. One obvious place for cost reduction is in the cost of the inverter and its associated controller. With that perspective, a novel application of the converter topology for the PMBDC known as C-dump in the switched reluctance motor drives is proposed in this paper. The advantages and disadvantages of this topology vis-a-vis the conventional 3 phase H-bridge converter, are highlighted from the points of view of economy in switches, volt ampere rating, associated controller cost, and packaging. Design considerations for the PMBDC motor are derived for use with the proposed converter topology. The operational and design characteristics of this converter driven PMBDC drive are derived for four quadrant performance. Guidelines for the design of the proposed performance. Guidelines for the design of the proposed topology are derived and presented in the paper. Experimental results from a laboratory prototype are presented to validate the feasibility of the proposed PMBDC drive system.

Krishnan, R.; Lee, S. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States)

1995-12-31T23:59:59.000Z

82

Columbia Power Technologies, Inc. Deploys its Direct Drive Wave Energy Buoy  

Office of Energy Efficiency and Renewable Energy (EERE)

Columbia Power Technologies, Inc. is working to advance their wave energy buoy to commercial readiness.

83

Thermal Management of Power Electronics and Electric Motors for Electric-Drive Vehicles (Presentation)  

SciTech Connect (OSTI)

This presentation is an overview of the power electronics and electric motor thermal management and reliability activities at NREL. The focus is on activities funded by the Department of Energy Vehicle Technologies Office Advanced Power Electronics and Electric Motors Program.

Narumanchi, S.

2014-09-01T23:59:59.000Z

84

Qualifying Facility Wheeling Task Force-- Status Report  

E-Print Network [OSTI]

Docket No. 8650 that the PUCT review the applicability of certain parts of the wheeling rules, and in April the Commission appointed a task force composed of representatives from affected industries, utilities, and regulatory staff to review the wheeling...

Panjavan, S.

85

Aging of turbine drives for safety-related pumps in nuclear power plants  

SciTech Connect (OSTI)

This study was performed to examine the relationship between time-dependent degradation and current industry practices in the areas of maintenance, surveillance, and operation of steam turbine drives for safety-related pumps. These pumps are located in the Auxiliary Feedwater (AFW) system for pressurized-water reactor plants and in the Reactor Core Isolation Cooling and High-Pressure Coolant Injection systems for boiling-water reactor plants. This research has been conducted by examination of failure data in the Nuclear Plant Reliability Data System, review of Licensee Event Reports, discussion of problems with operating plant personnel, and personal observation. The reported failure data were reviewed to determine the cause of the event and the method of discovery. Based on the research results, attempts have been made to determine the predictability of failures and possible preventive measures that may be implemented. Findings in a recent study of AFW systems indicate that the turbine drive is the single largest contributor to AFW system degradation. However, examination of the data shows that the turbine itself is a reliable piece of equipment with a good service record. Most of the problems documented are the result of problems with the turbine controls and the mechanical overspeed trip mechanism; these apparently stem from three major causes which are discussed in the text. Recent improvements in maintenance practices and procedures, combined with a stabilization of the design, have led to improved performance resulting in a reliable safety-related component. However, these improvements have not been universally implemented.

Cox, D.F. [Oak Ridge National Lab., TN (United States)

1995-06-01T23:59:59.000Z

86

Interactions between Electric-drive Vehicles and the Power Sector in California  

E-Print Network [OSTI]

Power; NGCC = Natural gas combined-cycle; NGCT = Natural gasSouthwest. Natural gas combined cycle and combined heat andNGCT), and natural gas combined cycle (NGCC) plants are

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2009-01-01T23:59:59.000Z

87

Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings  

Broader source: Energy.gov (indexed) [DOE]

PROGRAM PROGRAM The Drive for Net-Zero Energy Commercial Buildings Drury B. Crawley, Ph.D. U.S. Department of Energy Energy Efficiency and Renewable Energy Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 1 gy y gy Buildings' Energy Use Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 2 Commercial Square Footage Projections g j 104 Plus ~38B ft. 2 new additions 72 82 66 Minus ~16B ft. 2 demolitions 66 Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 3 Source: EIA's Annual Energy Outlook 2009, Table 5. 2010 2003 2030 Projected Electricity Growth 2010 to 2025, by End-Use Sector (site quad) Net-Zero Energy Commercial Building Initiative commercialbuildings.energy.gov 4 Projected Increase in

88

Energy Department Announces $53 Million to Drive Innovation, Cut Cost of Solar Power  

Office of Energy Efficiency and Renewable Energy (EERE)

WASHINGTON Building on President Obamas Climate Action Plan to cut carbon pollution and continue U.S. leadership in clean energy innovation, Energy Secretary Ernest Moniz today announced more than $53 million for 40 innovative research and development (R&D) projects that aim to drive down the cost of solar energy, tackling key aspects of technology development in order to bring innovative ideas to the market more quickly. Supporting the development of next generation photovoltaic (PV) solar technologies and advanced manufacturing processes, and addressing both hardware and non-hardware soft costs of solar installation, these awards support advancements that will help reduce the cost of solar energy and make solar electricity more affordable and accessible for all Americans.

89

Low-Cost Single-Phase Powered Induction Machine Drive for Residential Applications  

E-Print Network [OSTI]

, and lifetime. Keywords-induction motor; harmonic elimination; power factor correction; efficiency; low cost of the motors are less than 1 hp in size, and account for approximately 10% of the electricity consumed by the electric motor population [1]. These fractional horsepower motors are primarily single- phase induction

Chapman, Patrick

90

Short-circuit simulations help quantify wheeling flow  

SciTech Connect (OSTI)

During the late 1960s, three nuclear power plants were constructed in New England: Connecticut Yankee (590 MW, located in Haddam, Connecticut), Maine Yankee (870 MW located in Wiscasset, Maine), and Vermont Yankee (520 MW, located in Vernon, Vermont). Up to thirty-three New England utilities and municipalities participate in each. These units, called the Yankee units, are connected to the New England 345 kV transmission system. Built before the conception of the New England Power Pool (NEPOOL), these units rely on negotiated transmission agreements to implement the purchased power contracts. The Yankee Transmission Agreements were established to provide a mechanism for New England utilities, which provide the transmission wheeling services, to be adequately compensated for delivering the Yankee power. Under the agreements, the purchasing utilities (those utilities who purchase power from the nuclear plants) would pay into separate transmission funds based on their entitlement in the unit. The fund is then distributed among the transmitting utilities (those utilities providing the transmission wheeling services) based on the calculated use of their transmission systems. A methodology was established that could equal the units` life, offer flexibility to a changing system, and provide equitable results. This article describes how using commercially available software to automate simulations, perform the MW-miles calculation, and tabulate the results significantly reduces the time and computational effort to perform the wheeling calculations.

Scarfone, A.

1995-04-01T23:59:59.000Z

91

Energy Upgrade California Drives Demand From Behind the Wheel  

Broader source: Energy.gov [DOE]

With a goal of "energy efficiency or bust," theCalifornia Center for Sustainable Energy (CCSE) recently completed a statewide tour of its ongoing Energy Upgrade California Roadshow. The mobile...

92

Photo of the Week: A Driving Force for Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

A Driving Force for Natural Gas A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas September 28, 2012 - 3:04pm Addthis Since 1977, the people of the U.S. Department of Energy have been delivering the science, innovation and expertise required to advance America's energy, economic and national security. In this photo taken in June 1988, former Secretary of Energy John Herrington takes the wheel of a clean natural gas vehicle in front of the Energy Department in Washington, DC. Today, natural gas powers over 112,000 vehicles in the United States and roughly 14.8 million vehicles worldwide. Natural gas vehicles, which can run on compressed natural gas, are a good option for high-mileage, centrally-fueled fleets that operate within a limited area. | Photo courtesy of the Department of Energy.

93

Photo of the Week: A Driving Force for Natural Gas | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Photo of the Week: A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas Photo of the Week: A Driving Force for Natural Gas September 28, 2012 - 3:04pm Addthis Since 1977, the people of the U.S. Department of Energy have been delivering the science, innovation and expertise required to advance America's energy, economic and national security. In this photo taken in June 1988, former Secretary of Energy John Herrington takes the wheel of a clean natural gas vehicle in front of the Energy Department in Washington, DC. Today, natural gas powers over 112,000 vehicles in the United States and roughly 14.8 million vehicles worldwide. Natural gas vehicles, which can run on compressed natural gas, are a good option for high-mileage, centrally-fueled fleets that operate within a limited area. | Photo courtesy of the Department of Energy.

94

Aerodynamic Drag Reduction Apparatus For Wheeled Vehicles In Ground Effect  

DOE Patents [OSTI]

An apparatus for reducing the aerodynamic drag of a wheeled vehicle in a flowstream, the vehicle having a vehicle body and a wheel assembly supporting the vehicle body. The apparatus includes a baffle assembly adapted to be positioned upstream of the wheel assembly for deflecting airflow away from the wheel assembly so as to reduce the incident pressure on the wheel assembly.

Ortega, Jason M. (Pacifica, CA); Salari, Kambiz (Livermore, CA)

2005-12-13T23:59:59.000Z

95

Power requirements for electron cyclotron current drive and ion cyclotron resonance heating for sawtooth control in ITER  

E-Print Network [OSTI]

13MW of electron cyclotron current drive (ECCD) power deposited inside the q = 1 surface is likely to reduce the sawtooth period in ITER baseline scenario below the level empirically predicted to trigger neo-classical tearing modes (NTMs). However, since the ECCD control scheme is solely predicated upon changing the local magnetic shear, it is prudent to plan to use a complementary scheme which directly decreases the potential energy of the kink mode in order to reduce the sawtooth period. In the event that the natural sawtooth period is longer than expected, due to enhanced alpha particle stabilisation for instance, this ancillary sawtooth control can be provided from > 10MW of ion cyclotron resonance heating (ICRH) power with a resonance just inside the q = 1 surface. Both ECCD and ICRH control schemes would benefit greatly from active feedback of the deposition with respect to the rational surface. If the q = 1 surface can be maintained closer to the magnetic axis, the efficacy of ECCD and ICRH schemes sig...

Chapman, I T; Sauter, O; Zucca, C; Asunta, O; Buttery, R J; Coda, S; Goodman, T; Igochine, V; Johnson, T; Jucker, M; La Haye, R J; Lennholm, M; Contributors, JET-EFDA

2013-01-01T23:59:59.000Z

96

Power transaction issues in deregulated power systems  

E-Print Network [OSTI]

With the introduction of the deregulation in the power industry, it becomes possible to wheel power across the transmission network. Hence, some issues involving the network's physical capability to transfer power and the allocation of the network...

Roycourt, Henrik

2012-06-07T23:59:59.000Z

97

Obstacle Avoidance for Trajectory Tracking Control of Wheeled Mobile Robots  

Science Journals Connector (OSTI)

The wheeled mobile robots used in the flexible manufacturing systems act ... proposes a new control method for the wheeled mobile robots movement in the presence of static and...

R?zvan ?olea; Daniela Cristina Cernega

2013-01-01T23:59:59.000Z

98

E-Print Network 3.0 - adjustable electric drives Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

drives Search Powered by Explorit Topic List Advanced Search Sample search results for: adjustable electric drives...

99

The Wheels on the Bus Go Round and Round... | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... March 9, 2010 - 5:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program I have a love/hate relationship with buses. I love that they save me gasoline, are more efficient than driving a car, and reduce my greenhouse gas emissions. However, I hate them when they're running late! But there is one category of buses that I'm particularly fond of - those that run on alternative fuels. In fact, alternative fuel and advanced technology transit buses offer a number of health, environmental, and social benefits. As anyone who has walked behind a traditional diesel bus knows, the plume of black smoke from its tailpipe is both unpleasant and unhealthy. That

100

The Wheels on the Bus Go Round and Round... | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... The Wheels on the Bus Go Round and Round... March 9, 2010 - 5:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program I have a love/hate relationship with buses. I love that they save me gasoline, are more efficient than driving a car, and reduce my greenhouse gas emissions. However, I hate them when they're running late! But there is one category of buses that I'm particularly fond of - those that run on alternative fuels. In fact, alternative fuel and advanced technology transit buses offer a number of health, environmental, and social benefits. As anyone who has walked behind a traditional diesel bus knows, the plume of black smoke from its tailpipe is both unpleasant and unhealthy. That

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 17, NO. 5, SEPTEMBER 2002 721 The Matrix Converter Drive Performance Under  

E-Print Network [OSTI]

frequency conver- sion device that generates variable magnitude variable fre- quency output voltage from related performance issues of the MC drive. Since the MC is a direct frequency conversion device, the dis Drive Performance Under Abnormal Input Voltage Conditions Jun-Koo Kang, Member, IEEE, Hidenori Hara

Hava, Ahmet

102

TEMPERATURE-DEPENDENT RAMAN SPECTROSCOPY OF FULLERENE AND CARBORANE NANOCAR WHEELS  

E-Print Network [OSTI]

into a temperature difference. We can control the input voltage and current by using an external power supply to control temperature. The red and black wires are connected to the power supply. The yellow wireTEMPERATURE-DEPENDENT RAMAN SPECTROSCOPY OF FULLERENE AND CARBORANE NANOCAR WHEELS B. Shih1,2 , C

Mellor-Crummey, John

103

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular  

E-Print Network [OSTI]

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular momentum, which is a property of a bicycle wheel's mass is concentrated along the wheel's rim, rather than at the center, and this causes. The bicycle wheel, you, and the chair comprise a system that obeys the principle of conservation of angular

104

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

Treu, C.A. Jr.

1999-08-31T23:59:59.000Z

105

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

Treu, Jr., Charles A. (Raymore, MO)

1999-08-31T23:59:59.000Z

106

2338 IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 30, NO. 4, APRIL 2015 Optically Switched-Drive-Based Unified Independent  

E-Print Network [OSTI]

as well. Index Terms--Active gate drive, di/dt, dv/dt, electromagnetic interference (EMI), gallium. However, this leads to higher di/dt and dv/dt, which in turn, causes higher electromagnetic interference

Mazumder, Sudip K.

107

Energy Department Announces $53 Million to Drive Innovation,...  

Energy Savers [EERE]

Energy Department Announces 53 Million to Drive Innovation, Cut Cost of Solar Power Energy Department Announces 53 Million to Drive Innovation, Cut Cost of Solar Power October...

108

Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

Shayak Bhattacharjee

2015-01-17T23:59:59.000Z

109

Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

Shayak Bhattacharjee

2014-10-12T23:59:59.000Z

110

Traction Drive Systems Breakout  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Traction Drive Systems Breakout Traction Drive Systems Breakout John M. Miller, PhD, PE, F.IEEE, F.SAE Oak Ridge National Laboratory Facilitator July 24, 2012 EV Everywhere Grand Challenge Vehicle Technologies Program - Advanced Power Electronics and Electric Motors eere.energy.gov EV Everywhere Traction Drive System * DOE goals for Electric Traction Drive System (TDS) innovations must be disruptive innovation focused to meet the CY2022 price target ($20,000 $25,000) for a mid-sized 5 passenger sedan having 5 year simple payback. Enhanced Efficiency Reduced Cost Traction Drive System EETT Roadmap: "Therefore, research is needed to develop technologies that are less expensive and, at the same time, smaller, lighter, more efficient, and equally reliable as conventional automotive technologies. "

111

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado  

SciTech Connect (OSTI)

Geothermal Geodatabase for Wagon Wheel Hot Springs, Mineral County, Colorado By Richard Rick Zehner Geothermal Development Associates Reno Nevada USA 775.737.7806 rzehner@gdareno.com For Flint Geothermal LLC, Denver Colorado Part of DOE Grant EE0002828 2013 This is an ESRI geodatabase version 10, together with an ESRI MXD file version 10.2 Data is in UTM Zone 13 NAD27 projection North boundary: approximately 4,189,000 South boundary: approximately 4,170,000 West boundary: approximately 330,000 East boundary: approximately 351,000 This geodatabase was built to cover several geothermal targets developed by Flint Geothermal in 2012 during a search for high-temperature systems that could be exploited for electric power development. Several of the thermal springs at Wagon Wheel Gap have geochemistry and geothermometry values indicative of high-temperature systems. The datasets in the geodatabase are a mixture of public domain data as well as data collected by Flint Geothermal, now being made public. It is assumed that the user has internet access, for the mxd file accesses ESRIs GIS servers. Datasets include: 1. Results of reconnaissance shallow (2 meter) temperature surveys 2. Air photo lineaments 3. Groundwater geochemistry 4. Power lines 5. Georeferenced geologic map of Routt County 6. Various 1:24,000 scale topographic maps

Richard Zehner

2012-11-01T23:59:59.000Z

112

Clean Cities: Waste-to-Wheels: Building for Success Workshop  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events Events Printable Version Share this resource Send a link to Clean Cities: Waste-to-Wheels: Building for Success Workshop to someone by E-mail Share Clean Cities: Waste-to-Wheels: Building for Success Workshop on Facebook Tweet about Clean Cities: Waste-to-Wheels: Building for Success Workshop on Twitter Bookmark Clean Cities: Waste-to-Wheels: Building for Success Workshop on Google Bookmark Clean Cities: Waste-to-Wheels: Building for Success Workshop on Delicious Rank Clean Cities: Waste-to-Wheels: Building for Success Workshop on Digg Find More places to share Clean Cities: Waste-to-Wheels: Building for Success Workshop on AddThis.com... Conferences & Workshops Clean Cities 20th Anniversary Electric Vehicle Community Readiness Stakeholder Summit Waste-to-Wheels

113

The Effect of Grinding on Grinding Wheel Condition  

E-Print Network [OSTI]

The Effect of Grinding on Grinding Wheel Condition Prasann B. Handigund, Melissa Hasenbank Michele Process Abrasive wear Abrasive pull-out Wheel diameter shrinks Chip accumulation Surface finish Dimensional accuracy Grinding force Temperature #12;Wheel Wear and Self-Dressing Wear Modes: -Attritious wear

Endres. William J.

114

Biodiesel Drives Florida Power & Light's EPAct Alternative Compliance Strategy; EPAct Alternative Fuel Transportation Program: Success Story (Fact Sheet)  

SciTech Connect (OSTI)

This success story highlights how Florida Power & Light Company has successfully complied with the Energy Policy Act of 1992 (EPAct) through Alternative Compliance using biodiesel technologies and how it has become a biofuel leader, reducing petroleum use and pollutant emissions throughout Florida.

Not Available

2010-05-01T23:59:59.000Z

115

Design and analysis of modern three-phase AC/AC power converters for AC drives and utility interface  

E-Print Network [OSTI]

output current/voltage waveforms and fast dynamic response in high power areas. A new topology and control scheme for a six-step current source inverter is proposed. The proposed topology utilizes a small voltage source inverter, to turn off main...

Kwak, Sangshin

2005-08-29T23:59:59.000Z

116

Wheeling, Illinois: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wheeling, Illinois: Energy Resources Wheeling, Illinois: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1391927°, -87.9289591° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1391927,"lon":-87.9289591,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

117

A magneto-electric quantum wheel  

E-Print Network [OSTI]

Here we show that self-propulsion in quantum vacuum may be achieved by rotating or aggregating magneto-electric nano-particles. The back-action follows from changes in momentum of electro-magnetic zero-point fluctuations, generated in magneto-electric materials. This effect may provide new tools for investigation of the quantum nature of our world. It might also serve in the future as a "quantum wheel" to correct satellite orientation in space.

Alexander Feigel

2009-12-05T23:59:59.000Z

118

Motor control and torque coordination of an electric vehicle actuated by two in-wheel motors  

Science Journals Connector (OSTI)

In this research, an electric vehicle actuated by two in-wheel DC motors is developed. By properly coordinating the motor torques, both drive-by-wire and electrical steering can be achieved. Two critical issues respectively related to the design of motor controllers and the coordination of the two motor torques under control saturation are investigated in this study. Firstly, as for the in-wheel motors that are used for driving and steering simultaneously, their operation covers a wider dynamic range that forward acceleration (deceleration), and reverse acceleration (deceleration) may occur alternately. To perform driving and steering smoothly and efficiently, each motor should be switched to an appropriate mode to generate the torque demanded. Secondly, during the high-speed maneuvering, the high back-emf voltage in the motor coil substantially reduces the motors torque generating capability. Since the electrical steering depends on the differential torque of two wheels, when electrical steering is demanded in this case, torque/current saturation may occur in either one of the motors and the electrical steering performance could be seriously degraded. To address these issues, controllers of two levels are proposed. For the low-level controller (the motor controller), it operates the motor automatically in an appropriate mode for performance and efficiency consideration. An input transformation is introduced to cancel the nonlinearity in current dynamics so as to control the motor torque easily and precisely regardless of mode switching. For the high-level controller (the torque coordination controller), besides generating reference commands to the low-level controllers, during control saturation it can also properly re-distributes control signals to maintain consistent steering performance and provides compensation for integrator windup. The control system is implemented and the performance is experimentally and numerically validated.

Feng-Kuang Wu; T.-J. Yeh; Chun-Feng Huang

2013-01-01T23:59:59.000Z

119

Electric Drive Status and Challenges  

Broader source: Energy.gov [DOE]

Presentation given by technical manager Susan Rogers at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

120

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

the ping-pong ball and the wheel respectively. Location of mc are the radius of the wheel and the ball. m, m b , and msure the ball is caught between the wheels and the body. See

Chen, Po-Ting

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Numerical Analysis of the Channel Wheel Fresh Air Ventilator Under Frosting Conditions  

E-Print Network [OSTI]

channel wheel heat exchanger under different ambient conditions using the model developed. These include frost formation on the surface of the channel wheel heat exchanger, and impacts on the operational performance of the channel wheel fresh air...

Gao, B.; Dong, Z.; Cheng, Z.; Luo, E.

2006-01-01T23:59:59.000Z

122

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN  

E-Print Network [OSTI]

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN Helen Meng, Senis WHEELS is a conversational system which provides access to a database of eletronic automobile classified users to search through a database of 5,000 automobile classifieds. The current end-to-end system can re

123

The design process for wheel-robot integration  

E-Print Network [OSTI]

In this thesis, the design process for wheel-robot integration was documented and reflected on. The project focused on redesigned certain aspects a half-scale wheel-robot to be integrated with a half-scale CityCar prototype ...

Carvajal, Michael Angelo

2009-01-01T23:59:59.000Z

124

The U.S. Army's Vehicle Intelligence Program (AVIP): The Future of Manned, Wheeled Tactical Vehicles  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vehicle The U.S. Army's Vehicle Vehicle The U.S. Army's Vehicle Intelligence Program (AVIP): Intelligence Program (AVIP): The Future of Manned, Wheeled The Future of Manned, Wheeled Tactical Vehicles Tactical Vehicles H. E. (Bill) Knéé Oak Ridge National Laboratory National Transportation Research Center 2360 Cherahala Blvd. Knoxville, Tennessee 37932 USA Phone: (865) 946-1300 Fax: (865) 946-1314 E-mail: kneehe@ornl.gov David J. Gorsich U.S. Army Tank-Automotive and Armaments Command AMSTA-TR-N, Warren, Michigan 49397-5000 USA Phone: (810) 574-7413 Fax: (810) 574-6996 E-mail: GorsichD@tacom.army.mil IV2001 IEEE Intelligent Vehicles Symposium Tokyo, Japan http://www.ornl.gov/ORNLReview/v33_3_00/features.htm 1. Propulsion, Vehicle and Power Systems 2. Information and Decision Support Systems 3. Materials, Structures, and Mechanical Systems

125

Driving gear rack cleaner for a mining machine  

SciTech Connect (OSTI)

A driving gear for a mining machine is described that is comprised of a coil chain wound over a driving wheel and a jockey wheel and co-operating with a rack mounted along a conveyor. A sweep-off gear is pivotably mounted in front of a slide of the machine at a level above the rack. The sweep-off gear has a sweep-off surface which is inclined both with respect to the longitudinal axis of the rack and the horizontal surface of the rack teeth for sweepingoff bodies from the rack onto the conveyor. Nozzles are provided on the gear for washing the rack with a water stream under pressure at an angle with respect to the surface of the rack.

Blazewicz, A.; Krutki, M.; Mandat, K.; Sedlaczek, J.; Wozniak, T.

1980-12-23T23:59:59.000Z

126

Combustion powered linear actuator  

DOE Patents [OSTI]

The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

Fischer, Gary J. (Albuquerque, NM)

2007-09-04T23:59:59.000Z

127

Comparative efficiency and driving range of light- and heavy-duty vehicles powered with biomass energy stored in liquid fuels or batteries  

Science Journals Connector (OSTI)

...L (6.8 mi/gal diesel)], all scenarios...LDV class and driving cycle, and a factor...conventional Rankine cycle for net export. One...city/highway driving cycle basisa value...criteria pollutants is in general not a substantial motivation...

Mark Laser; Lee R. Lynd

2014-01-01T23:59:59.000Z

128

Electric vehicle drive train with contactor protection  

DOE Patents [OSTI]

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor.

Konrad, Charles E. (Roanoke, VA); Benson, Ralph A. (Roanoke, VA)

1994-01-01T23:59:59.000Z

129

Chapter Seven - Variable speed drives  

Science Journals Connector (OSTI)

Publisher Summary The electromechanical controllers are a kind of variable speed drives (VSDs) that are obsolete but are still in use because when a motor and a drive is combined, they become a power drive system (PDS). There are two ways of varying the speed of an induction motor, either by varying the motor slip or by varying the supply frequency. The preferred practice for electrical speed variation is to change the supply frequency with a variable frequency drive (VFD). Many other designs also have been developed. However, except the specialized applications, few are still in operation. A number of motor and drive manufacturers are now producing the integrated motor/VFD units. These units consist of a motor and a specially designed VFD, produced as a single package, with the VFD unit mounted variously on the top, side, or end of the motor.

Europump; Hydraulic Institute

2005-01-01T23:59:59.000Z

130

Catalog of DC Appliances and Power Systems  

E-Print Network [OSTI]

en.wikipedia.org/wiki/Variable-frequency_drive. Garbesi,are generally powered by variable frequency drives.The typical variable frequency drive first rectifies the AC

Garbesi, Karina

2012-01-01T23:59:59.000Z

131

Argonne's GREET Model - Driving Transportation Solutions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving Driving Transportation Solutions Model Argonne's GREET D r i v i n g Tr a n s p o r t a t i o n S o l u t i o n s ARGONNE'S GREET Argonne's GREET model is widely recognized as the "gold standard" for evaluating and comparing the energy and environmental impacts of transportation fuels and advanced vehicles. The Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model is a one-of-a-kind analytical tool that simulates the energy use and emissions output of various vehicle and fuel combinations. Sponsored by the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy, the free software program gives researchers the unique ability to analyze technologies over an entire life cycle - from well to wheels and from raw material mining to vehicle disposal.

132

Regulators run the gamut on retail wheeling-Fitch  

SciTech Connect (OSTI)

Retail wheeling is less imminent than previously thought, according to a Fitch Investors Service survey of state regulators who appear to be more skeptical than optimistic about the prospects for direct customer access. The survey also shoes that those regulators who are interested in retail wheeling hope to experiment with it without federal intervention. Of the 36 states whose commissioners responded to the Fich survey, 28 percent expressed an overall positive outlook for retail wheeling within their states, while 42 percent were negative. The remaining 30 percent were neutral.

O`Driscoll, M.

1994-10-31T23:59:59.000Z

133

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS  

E-Print Network [OSTI]

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS AND ENERGY CONSUMPTION Prepared For: California to Tank, Criteria Pollutants, Multi-media impacts, EMFAC #12;#12;vii Table of Contents Acknowledgements

134

The design, construction, and control of a wheeled robot vehicle  

E-Print Network [OSTI]

THE DESIGN, CONSTRUCTION, AND CONTROL OF A WHEELED ROBOT VEHICLE A Thesis by TEVO EKIRI WANG Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE December... 1986 Major Subject: Mechanical Engineering THE DESIGN, CONSTRUCTION, AND CONTROL OF A WHEELED ROBOT VEHICLE A Thesis by TEVO EKIRIWANG Approved as to style and content by: Dennis N. ingham (Chairman of Committ ) Louis J. Everett c . C...

Ekiriwang, Tevo

2012-06-07T23:59:59.000Z

135

Comparison of regime-dependent capacities of wind-driven power plants  

Science Journals Connector (OSTI)

The operational regimes of wind-driven power plants developed in Russia are analyzed taking into account the aerodynamic characteristics of the wind wheel.

R. S. Tsgoev

2007-12-01T23:59:59.000Z

136

Engineering AnteaterDrive  

E-Print Network [OSTI]

Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

Mease, Kenneth D.

137

RHONEY, BRIAN KEITH. Cylindrical Wire Electrical Discharge Truing of Metal Bond Diamond Grinding Wheels. (Under the direction of Albert Shih)  

E-Print Network [OSTI]

Electrical Discharge Machining (EDM) to profile a metal bond diamond grinding wheel, and then study the wear to rotate the wheel inside a traditional wire EDM machine. Once the process proved feasible, grinding and grinding performance of the EDM trued wheel. Diamond wheels are known to exhibit low wheel wear

Shih, Albert J.

138

Snubber circuit designed for electric car drive system  

Science Journals Connector (OSTI)

This article presents a method to develop the speed-controller dc-motor chopper drive system by using mosfet as the switching drive for motor speed control. The switching current during ton state, and toff state of the mosfet can cause power ... Keywords: chopper, electric drive, mosfet, parallel connected, power dissipation, snubber circuit

Sakrawee Raweekul

2012-01-01T23:59:59.000Z

139

Evaluation of a Current Source Active Power Filter to Reduce the DC Bus Capacitor in a Hybrid Electric Vehicle Traction Drive  

E-Print Network [OSTI]

Electric Vehicle Traction Drive Shengnan Li Student Member, IEEE The University of Tennessee Department Science Knoxville, TN, 37996, USA tolbert@utk.edu Abstract ­ In hybrid electric vehicles (HEV), a battery-source inverter, dc bus capacitor, Electric vehicle, Harmonic current, Hybrid electric vehicle. I. INTRODUCTION

Tolbert, Leon M.

140

Laser Direct Drive: Scientific Advances,  

E-Print Network [OSTI]

· Simpler targets & physics · Predict Fusion Class Gains (> 140) at lower laser energy (500 kJ - 1 MJ) #12;7 KrF lasers have advantages for fusion energy PHYSICS Deeper UV (248 nm vs 351 for glass): -- Greater · chamber #12;9 Gain for Fusion Energy New Direct Drive Designs: Power plant class gains, much smaller laser

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Remedial neural network inverse control of a multi-phase fault-tolerant permanent-magnet motor drive for electric vehicles  

Science Journals Connector (OSTI)

A five-phase in-wheel fault-tolerant interior permanent-magnet (FT-IPM) motor incorporates the merits of high efficiency, high power density and high reliability, suitable for Electric Vehicles (EVs). A new remedial Neural Networks Inverse (NNI) control strategy is proposed to attain the post-fault operation. In this scheme, the NN is used to approximate the inverse model of the FT-IPM motor. With this NNI system and the original motor drive combined, a pseudo-linear compound system can be obtained. The simulation demonstrates that the proposed control strategy leads to excellent control performance at the faulty mode and offers good robustness against load disturbance.

Duo Zhang; Guohai Liu; Wenxiang Zhao

2013-01-01T23:59:59.000Z

142

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE  

E-Print Network [OSTI]

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE EXPERIMENTAL DATA FOR THE EVALUATION OF HYDROGEN with success a project called DRIVE to the National Research Agency. This project aims at providing procedures and technologies will provide only limited guidance for hydrogen-powered vehicles. That is because

Paris-Sud XI, Université de

143

Retooling Michigan: 'Wheels' to Wind | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Retooling Michigan: 'Wheels' to Wind Retooling Michigan: 'Wheels' to Wind Retooling Michigan: 'Wheels' to Wind July 21, 2010 - 10:12am Addthis This part from the inside of a wind turbine might someday generate clean, renewable energy. | Photo courtesy Merrill Technologies Group This part from the inside of a wind turbine might someday generate clean, renewable energy. | Photo courtesy Merrill Technologies Group Joshua DeLung "Traditionally, we made automotive products," says Scott McKay, General Manager for Merrill Technologies Group in Saginaw, Mich. "After several ups and downs in that industry, we've opened our eyes to finding ways to diversify our line of products, and one of those areas is in making renewable energy materials." Merrill is using $3 million awarded through the U.S. Department of

144

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

Wheeled, Ball-Flinging Robot A thesis submitted in partiala Two-Wheeled, Ball-Flinging Robot by Po-Ting Chen Master ofremote controlled robot. The robot is maneuverable and

Chen, Po-Ting

2010-01-01T23:59:59.000Z

145

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many  

E-Print Network [OSTI]

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many potential and strength and meet all manufacturer specifications. Abrasive Wheel Machinery and Tools Safety Tip #1

Minnesota, University of

146

Analytical framework for the smooth manoeuvre of wheeled mobile robots traversing obstacles  

Science Journals Connector (OSTI)

...the smooth manoeuvre of wheeled mobile robots traversing obstacles S. O. Oyadiji...model the dynamics of wheeled mobile robots (WMRs), which need to travel...characteristics of a traction surface. mobile robots|temporal trajectory|traction...

2005-01-01T23:59:59.000Z

147

Design of an omnidirectional and holonomic wheeled platform prototype  

SciTech Connect (OSTI)

This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independent rotational and translational motion capabilities. We first describe the original orthogonal-wheels assembly'' on which these platforms are based and discuss how a combination of these assemblies is used to generate an omnidirectional capability. The design and control of a prototype platform developed to test and demonstrate the proposed concepts is then described, and experimental results illustrating the full omnidirectionality of the platform with decoupled rotational and translational degrees of freedom are presented. 15 refs., 9 figs.

Killough, S.M.; Pin, F.G.

1991-01-01T23:59:59.000Z

148

Vehicle Technologies Office: Electric Drive Technologies  

Broader source: Energy.gov [DOE]

Advanced power electronics and electric motors (APEEM) that make up vehicles' electric drive system are essential to hybrid and plug-in electric vehicles. As such, improvements in these...

149

Wheel Design and Tension Analysis for the Tethered Axel Rover on Extreme Terrain  

E-Print Network [OSTI]

and then present our experimental results from testing with different wheel designs on flat, sloped, and rocky

150

Development of Legged, Wheeled, and Hybrid Rover Mobility Models to Facilitate Planetary Surface  

E-Print Network [OSTI]

that wheeled mobility is best suited for flat and level terrain, and legged mobility is best suited for rocky

151

2 DOF Low Cost Platform for Driving Simulator: Modeling and Control Hichem Arioui, Salim Hima and Lamri Nehaoua  

E-Print Network [OSTI]

of the longitudinal and yaw movements. To enhance the drive immersion in the virtual world, a haptic feedback steering wheel will be implemented. The whole system is considered as a two coupled systems and linked mechanically. The first system consists in motorized rail for the longitudinal movement while the second system

Paris-Sud XI, Université de

152

Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots  

E-Print Network [OSTI]

a tightly cooperative task, where the humanoid robot and the wheeled robot follow for a long distance a ballCooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots Jutta and a wheeled robot with largely complementing and some competing capabilities. By combining two strongly

Stryk, Oskar von

153

Experimental assessment of wheel/rail interaction force with rolling noise analysis  

E-Print Network [OSTI]

pressure and vibration of the wheel are compared to the measured one to validate the method 1 Introduction to measure the acous- 1Track Wheel Interaction Noise Software tic impedance and vibration mobility (transfert function be- tween vibration velocity and input force) of the wheel and the track. A measurement campaign

Paris-Sud XI, Université de

154

MagLab - Barlow's Wheel Tutorial  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the invention of the first battery, the voltaic pile) to create a very early kind of electric motor. It combined the powers of electricity and magnetism to produce continuous...

155

Adjustable Speed Drive Study, Part 2.  

SciTech Connect (OSTI)

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The DC motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use.

Wallace, Alan K.; Oregon State University. Dept. of Electrical and Computer Engineering.

1989-08-01T23:59:59.000Z

156

Adjustable Speed Drive Study, Part 1.  

SciTech Connect (OSTI)

Advances in speed control for motors in recent years, notably those in power electronics, have widened the range of application for several adjustable speed drive (ASD) types to include the smaller horsepower sizes. The dc motor drive, formerly in almost universal use for speed control, is being challenged by the high efficiency induction motor/pulse width modulation (PWM) drive; and for special small horsepower size applications, by the permanent magnet motor/PWM inverter drive or by the switched reluctance motor drive. The main characteristics of the several ASD types suitable for small horsepower size applications are discussed, as well as their unwanted side effects: poor power factor, harmonic distortion of the supply, acoustic noise, and electromagnetic interference. A procedure is recommended for determining which, if any, ASD to use. 31 figs., 6 tabs.

Wallace, Alan K.; Oregon State University. Dept. of Electrical and Computer Engineering.

1989-08-01T23:59:59.000Z

157

Holiday Food Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Food Drive Food Drive Holiday Food Drive During the recent holiday food drive, employees donated enough food to provide about 23,604 holiday meals for Northern New Mexico families. More than 432 frozen turkeys were donated this year by employees and other donors during 'Bring a Turkey to Work Day,' an annual Lab event that takes places Thanksgiving week. September 16, 2013 LANL employees organize food for the Holiday Food Drive. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping feed Northern New Mexico families Community partners The Food Depot (Santa Fe) Del Norte Credit Union Smith's Food and Drug Giving Holiday Food Drive Holiday Gift Drive LANL Laces Los Alamos Employees' Scholarship Fund

158

A FULLY DISTRIBUTED PRIME NUMBERS GENERATION USING THE WHEEL SIEVE  

E-Print Network [OSTI]

A FULLY DISTRIBUTED PRIME NUMBERS GENERATION USING THE WHEEL SIEVE Gabriel Paillard Laboratoire d distributed approach for generating all prime numbers up to a given limit. From Er- atosthenes, who elaborated. In this work, we propose a new distributed algorithm which generates all prime num- bers in a given finite

Paris-Sud XI, Université de

159

Issues in Controllability and Motion Planning for Overconstrained Wheeled Vehicles  

E-Print Network [OSTI]

model, hereafter referred to as the Simplified Rocky 7 (or SR7), the vehicle operates on flat terrain during the Mars Pathfinder mission. Fig. 1 shows the "Rocky 7," a prototype for future Mars rover vehicles whose suspension and wheel kinematics are essentially identical to the Sojourner. The Rocky 7

Hartmann, Mitra J. Z.

160

Simplified Modelling and Control of a Synchronous Machine with VariableSpeed SixStep Drive  

E-Print Network [OSTI]

of electrical power flow in the machine. Cost is a driving factor in the design of such a system, and the power frequency than PWM as well. II. VARIABLE­SPEED ELECTRIC MACHINE DRIVES While the choice of driveSimplified Modelling and Control of a Synchronous Machine with Variable­Speed Six­Step Drive

Sanders, Seth

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Electric Drive Vehicle Level Control Development Under Various...  

Broader source: Energy.gov (indexed) [DOE]

3 The objective is to develop the entire vehicle thermal management system for two electric drive vehicles (HEVs, PHEVs). Limited battery power and low engine efficiency at...

162

Granular gases under extreme driving  

E-Print Network [OSTI]

We study inelastic gases in two dimensions using event-driven molecular dynamics simulations. Our focus is the nature of the stationary state attained by rare injection of large amounts of energy to balance the dissipation due to collisions. We find that under such extreme driving, with the injection rate much smaller than the collision rate, the velocity distribution has a power-law high energy tail. The numerically measured exponent characterizing this tail is in excellent agreement with predictions of kinetic theory over a wide range of system parameters. We conclude that driving by rare but powerful energy injection leads to a well-mixed gas and constitutes an alternative mechanism for agitating granular matter. In this distinct nonequilibrium steady-state, energy cascades from large to small scales. Our simulations also show that when the injection rate is comparable with the collision rate, the velocity distribution has a stretched exponential tail.

W. Kang; J. Machta; E. Ben-Naim

2010-02-04T23:59:59.000Z

163

US DRIVE Driving Research and Innovation for Vehicle Efficiency...  

Broader source: Energy.gov (indexed) [DOE]

Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy...

164

You will be hired in our Local Business Unit Substations (Power Systems Division) and, in the role of Service Sales Specialist, you will drive the  

E-Print Network [OSTI]

You will be hired in our Local Business Unit Substations (Power Systems Division) and, in the role and profitability targets for Substations Systems Your contact: Veronica Meloni, Talent Acquisition Department professionals. Requirements You have at least 2 or 3 years experience in the Substations segment and you have

Segatti, Antonio

165

Chapter 18: Variable Frequency Drive Evaluation Protocol  

SciTech Connect (OSTI)

An adjustable-speed drive (ASD) includes all devices that vary the speed of a rotating load, including those that vary the motor speed and linkage devices that allow constant motor speed while varying the load speed. The Variable Frequency Drive Evaluation Protocol presented here addresses evaluation issues for variable-frequency drives (VFDs) installed on commercial and industrial motor-driven centrifugal fans and pumps for which torque varies with speed. Constant torque load applications, such as those for positive displacement pumps, are not covered by this protocol. Other ASD devices, such as magnetic drive, eddy current drives, variable belt sheave drives, or direct current motor variable voltage drives, are also not addressed. The VFD is by far the most common type of ASD hardware. With VFD speed control on a centrifugal fan or pump motor, energy use follows the affinity laws, which state that the motor electricity demand is a cubic relationship to speed under ideal conditions. Therefore, if the motor runs at 75% speed, the motor demand will ideally be reduced to 42% of full load power; however, with other losses it is about 49% of full load power.

Romberger, J.

2014-11-01T23:59:59.000Z

166

Adjustable Speed Drive Part-Load Efficiency  

Broader source: Energy.gov [DOE]

An adjustable speed drive (ASD) is a device that controls the rotational speed of motor-driven equipment. Variable frequency drives (VFDs), the most common type of ASDs, efficiently meet varying process requirements by adjusting the frequency and voltage of the power supplied to an AC motor to enable it to operate over a wide speed range. External sensors monitor flow, liquid levels, or pressure and then transmit a signal to a controller that adjusts the frequency and speed to match process requirements.

167

Frequency modulation drive for a piezoelectric motor  

DOE Patents [OSTI]

A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

Mittas, Anthony (Albuquerque, NM)

2001-01-01T23:59:59.000Z

168

Evaluating Benefits with Independent and Cogenerated Power Production  

E-Print Network [OSTI]

of "stakeholders", (e.g. IPP's, ?cogenerators, industrial hosts, utility shareholders and rate payers), and additional technical issues (e.g. generation dispatch, transmission, wheeling, etc.) associated with independent power generation. This paper...

Ahner, D. J.

169

Holiday Gift Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Holiday Gift Drive Holiday Gift Drive Holiday Gift Drive Every year, Laboratory employees help fulfill the holiday wishes of children and seniors in our communities. In 2012, our employees helped more than 1,030 Northern New Mexico children, senior citizens and families have a brighter holiday season. September 16, 2013 Every holiday season, employees of Los Alamos National Laboratory donate and distribute gifts to families in need throughout Northern New Mexico. Contacts Giving Drives Ed Vigil Community Programs Office (505) 665-9205 Email Giving Drives Enrique Trujillo Community Programs Office (505) 665-6384 Email Helping New Mexico families feel the holiday spirit The 2013 campaign runs from November 21-December 18. 2012 Holiday Gift Drive partners Boys and Girls Club Del Norte (Abiquiu Site)

170

NREL: Fleet Test and Evaluation - Hybrid Electric Drive Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hybrid Electric Drive Systems Hybrid Electric Drive Systems The Fleet Test and Evaluation Team conducts performance evaluations of hybrid electric drive systems in fleets of delivery vehicles and transit buses. Hybrid electric drive systems combine a primary power source, an energy storage system, and an electric motor to achieve a combination of emissions, fuel economy, and range benefits unattainable with any of these technologies alone. Hybrid electric drive systems use less petroleum-based fuel and capture energy created during breaking and idling. This collected energy is used to propel the vehicle during normal drive cycles. The batteries supply additional power for acceleration and hill climbing. Learn more about the team's hybrid electric drive system evaluations: Delivery Vehicles

171

Optimization of Driving Styles for Fuel Economy Improvement  

SciTech Connect (OSTI)

Modern vehicles have sophisticated electronic control units, particularly to control engine operation with respect to a balance between fuel economy, emissions, and power. These control units are designed for specific driving conditions and testing. However, each individual driving style is different and rarely meets those driving conditions. In the research reported here we investigate those driving style factors that have a major impact on fuel economy. An optimization framework is proposed with the aim of optimizing driving styles with respect to these driving factors. A set of polynomial metamodels are constructed to reflect the responses produced by changes of the driving factors. Then we compare the optimized driving styles to the original ones and evaluate the efficiency and effectiveness of the optimization formulation.

Malikopoulos, Andreas [ORNL] [ORNL; Aguilar, Juan P. [Georgia Institute of Technology] [Georgia Institute of Technology

2012-01-01T23:59:59.000Z

172

Memory Hard Drive Peripherals  

E-Print Network [OSTI]

1! CSI3131 Topics CPU Memory Hard Drive Peripherals Computing Systems OS Overview StructureDeadlocks M em ory M anagem ent Basic Memory Managermtn Virtual Memory Storage and I/O File Systems Hard Drive Management Swap I/O Management 2 Module 7: Memory Management Reading: Chapter 8 § To provide a detailed

Stojmenovic, Ivan

173

Aggregation method for motor drive systems  

Science Journals Connector (OSTI)

Abstract When many variable frequency drives are connected to a common switchboard, their aggregated effect on system dynamics can be significant. In this paper, the aggregation method for variable frequency drives and their motors in industrial facilities is proposed, which is suitable for power systems dynamic studies. The proposed method can be applied to various types of motor drive systems. There are two steps involved for the proposed aggregation method: (1) aggregate motor drive systems connected to the same bus, and (2) further combine the aggregated model of motor drive systems from Step 1 with upstream series impedance and/or transformers. Due to involvement of high-order transfer functions in dynamic models of individual motor drive systems, Pade approximation is used as a useful tool in the aggregation process. Using the proposed aggregation method, an equivalent aggregated dynamic model of motor drive systems can be obtained at the substation bus. A case study is conducted in the paper, and the proposed aggregation method is verified to be effective by the case study.

Xiaodong Liang; Wilsun Xu

2014-01-01T23:59:59.000Z

174

Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive Trains  

E-Print Network [OSTI]

Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive Trains Wilhelm Peters, Tobias Huber, Joachim Böcker Power Electronics and Electrical Drives, Paderborn automotive traction drives are a wide speed range, a wide constant-power operation range and high efficiency

Paderborn, Universität

175

Billiards Digest June, 2012 "VEPP Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES  

E-Print Network [OSTI]

Control and English." "Wagon wheel" drills are very useful to help you practice and develop cue ball (CB angle slightly for each ball. There is actually a system you can use to help decide where to placeBilliards Digest June, 2012 "VEPP ­ Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES David

Alciatore, David G.

176

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled Mobile Robot  

E-Print Network [OSTI]

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled is a dynamically stable mobile robot that moves on a single spherical wheel and is capable of omni- directional movement. The ballbot is an underactuated system with nonholonomic dynamic constraints. The authors propose

177

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile  

E-Print Network [OSTI]

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile Robot. It actively balances and moves on a single wheel using closed loop feedback, making it dynamically stable it a good candidate for operating in human environments. Balancing on a ball allows Ballbot to be omni

178

Bilateral Teleoperation of Wheeled Mobile Robot with Time Delay using Virtual Image Robot  

E-Print Network [OSTI]

Bilateral Teleoperation of Wheeled Mobile Robot with Time Delay using Virtual Image Robot Yasunori of wheeled mobile robot with time delay using the virtual image robot. In this paper, we introduce the virtual image robot as a master robot. The human operator commands the virtual image robot, the slave

179

Modelling and simulation of double-link scenario in a two-wheeled wheelchair  

Science Journals Connector (OSTI)

Wheelchairs on two wheels are essential part of life for disabled persons. But designing control strategies for these wheelchairs is a challenging task due to the fact that they are highly nonlinear and unstable systems. The subtle design of the system ... Keywords: Disabled, Double Inverted Pendulum, Mathematical Modelling, Two-Wheeled Mobile Robot, Wheelchair

Salmiah Ahmad; Nazmul H. Siddique; M. O. Tokhi

2014-04-01T23:59:59.000Z

180

Flexible, Wide-Area Storage for Distributed Systems with WheelFS  

E-Print Network [OSTI]

WheelFS is a wide-area distributed storage system intended to help multi-site applications share data and gain fault tolerance. WheelFS takes the form of a distributed file system with a familiar POSIX interface. Its design ...

Stribling, Jeremy

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

DRIVE(tm) Mobile App | Open Energy Information  

Open Energy Info (EERE)

DRIVE(tm) Mobile App DRIVE(tm) Mobile App Jump to: navigation, search Tool Summary LAUNCH TOOL Name: DRIVE(tm) Mobile App Agency/Company /Organization: Apps for Energy Challenge Participant Sector: Energy Resource Type: Application prototype User Interface: Website, Mobile Device Website: ikehu.cloudapp.net/Drive OpenEI Keyword(s): Challenge Generated, Green Button Apps Language: English References: Apps for Energy[1] The DRIVE(tm) System is a patent-pending solution that provides incentives to residential customers to reduce power consumption during peak and critical peak times. It rewards desired consumer behavior with points or airline miles. The DRIVE(tm) System is a patent-pending solution that provides incentives to residential customers to reduce power consumption during peak and

182

Variable Frequency Drives  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

How BPA Supports VFDs Rebates are available from your utility for Variable Frequency Drives on pumps 20hp or greater and storage fans.. Energy savings from VFDs vary and can...

183

Vehicle Technologies Office: Materials for Hybrid and Electric Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Hybrid and for Hybrid and Electric Drive Systems to someone by E-mail Share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Facebook Tweet about Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Twitter Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Google Bookmark Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Delicious Rank Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on Digg Find More places to share Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines

184

Technological Advances in Hydraulic Drive Trains for Wind Turbines  

Science Journals Connector (OSTI)

The reliability of frequency converters is a major concern for wind turbines. ChapDrive AS has built and tested a hydraulic drive train for variable speed wind turbines which includes a synchronous generator that is connected to the grid without the use of a frequency converter. The hydraulic drive train consists of a hydraulic pump, a variable displacement hydraulic motor, and a synchronous generator, which enables rotor speed control while maintaining synchronous speed of the generator. It has been proven that the hydraulic drive train and the ChapDrive Control system are able to absorb fluctuations in the wind speed and maintain a constant power output without the use of frequency converters. The hydraulic drive train and the ChapDrive Control system has been modeled analytically and compared to measurements, demonstrating a good agreement between simulations and measurements.

K.E.Thomsen; O.G. Dahlhaug; M.O.K. Niss; S.K. Haugset

2012-01-01T23:59:59.000Z

185

Automobile Driving and Aggressive Behavior  

E-Print Network [OSTI]

The accident prone automobile driver. American Journal ofAutomobile Driving And Aggressive Behavior Raymond W. Novacofor its content or use. Automobile Driving and Aggressive

Novaco, Raymond W.

1991-01-01T23:59:59.000Z

186

Traction Drive Systems Breakout Group  

Broader source: Energy.gov (indexed) [DOE]

overlook profit motive in value chain * 4 - Today's HEV systems drive EV traction drive systems because of manufacturing base Barriers Interfering with Reaching the Targets * 1 -...

187

Solar powered swimming pool skimmer  

SciTech Connect (OSTI)

This patent describes a swimming pool skimmer assembly. It comprises: a U-shaped housing which includes two spaced-apart pontoons and a leg connecting the pontoons together, a paddle wheel assembly mounted on the housing and including, a motor having an output shaft, a gear reduction assembly connected to the motor output shaft and a paddle wheel means connected to the gear reduction assembly; a debris catcher mounted on the housing adjacent to the paddle wheel; power means on the housing and connected to the motor, including a solar cell array mounted on the housing connecting leg, and electrically connected to the motor, and a solar concentrator mounted on the housing adjacent to the solar cell; and an alarm circuit means connected to the debris catcher.

Distinti, J.A.; Fonti, R.G.

1992-04-21T23:59:59.000Z

188

High Power Density Integrated Traction Machine Drive  

Broader source: Energy.gov [DOE]

2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

189

Adjustable Speed Drive Power Quality Evaluation Program  

E-Print Network [OSTI]

of Detroit Edison provided administrative guidance. 3 #12;From G. Strangas Michigan State University East Lansing, MI 48824 4 June 1996 #12;Contents 1 Introduction sag disruption is a very common problem. Michigan State University undertook a project, funded

Strangas, Elias G.

190

Working on new gas turbine cycle for heat pump drive  

E-Print Network [OSTI]

Working on new gas turbine cycle for heat pump drive FILE COPY TAP By Irwin Stambler, Field Editor, is sized for a 10-ton heat pump system - will be scaled to power a commercial product line ranging from 7 of the cycle- as a heat pump drive for commercial installations. Company is testing prototype gas turbine

Oak Ridge National Laboratory

191

CARRIER BASED PWM-VSI DRIVES IN THE OVERMODULATION REGION  

E-Print Network [OSTI]

CARRIER BASED PWM-VSI DRIVES IN THE OVERMODULATION REGION By Ahmet M. Hava A dissertation submitted in motor drive and other three-phase power conversion applications as voltage current sources the inverter energy e ciency, waveform quality, and voltage linearity. However, the dependence

Hava, Ahmet

192

The Matrix Converter Drive Performance Under Abnormal Input Voltage Conditions  

E-Print Network [OSTI]

that generates variable magnitude variable frequency output voltage from the ac utility line. It has high power voltage disturbance related performance issues of the MC drive. Since the MC is a direct frequencyThe Matrix Converter Drive Performance Under Abnormal Input Voltage Conditions Jun-Koo Kang

Hava, Ahmet

193

Electric-Drive Vehicle engineering  

E-Print Network [OSTI]

Electric-Drive Vehicle engineering COLLEGE of ENGINEERING Electric-drive engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electric-drive vehicle

Berdichevsky, Victor

194

An improved energy management strategy for FC/UC hybrid electric vehicles propelled by motor-wheels  

Science Journals Connector (OSTI)

Abstract The hybridization of the fuel-cell electric-vehicle (FCEV) by a second energy source has the advantage of improving the system's dynamic response and efficiency. Indeed, an ultra-capacitor (UC) system used as an energy storage device fulfills the FC slowest dynamics during fast power transitions and recovers the braking energy. In FC/UC hybrid vehicles, the search for a suitable power management approach is one of the main objectives. In this paper, an improved control strategy managing the active power distribution between the two energy sources is proposed. The UC reference power is calculated through the DC link voltage regulation. For the FC power demand, an algorithm with five operating modes is developed. This algorithm, depending on the UC state of charge (SOC) and the vehicle speed level, minimizes the FC power demand transitions and therefore ameliorates its durability. The traction power is provided using two permanent magnetic synchronous motor-wheels to free more space in the vehicle. The models of the FC/UC vehicle system parts and the control strategy are developed using MATLAB software. Simulation results show the effectiveness of the proposed energy management strategy.

Islem Lachhab; Lotfi Krichen

2014-01-01T23:59:59.000Z

195

Drive5 | Open Energy Information  

Open Energy Info (EERE)

Drive5 Drive5 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Drive5 Agency/Company /Organization: Drive5 Sector: Energy Focus Area: Vehicles Resource Type: Software/modeling tools User Interface: Website, Mobile Device Website: www.drive5.us Web Application Link: www.drive5.us Cost: Free OpenEI Keyword(s): Challenge Generated Drive5 Screenshot References: Drive5[1] Challenge.gov[2] Challenge.gov Submission Page[3] Measure your fuel economy real time with five metrics to save on fuel costs. Overview Drive1: Fuel Economy Drive5 gives you real time fuel economy feedback for any car 1984 and newer by simply utilizing the sensors embedded in your phone or tablet. It uses a statistical algorithm which leverages the fueleconomy.gov's open dataset along with data from thousands of automobile trips. No connections to the

196

EV Everywhere Workshop: Traction Drive Systems Breakout Group Report  

Broader source: Energy.gov [DOE]

Presentation given at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

197

EV Everywhere Grand Challenge Introduction for Electric Drive Workshop  

Broader source: Energy.gov [DOE]

Presentation given by EERE Assistant Secretary David Danielson at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

198

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework  

Broader source: Energy.gov [DOE]

Presentation given by Vehicle Technologies Office analyst Jake Ward at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL.

199

Variable Frequency Pump Drives  

E-Print Network [OSTI]

-frequency electric motor drive. What is happenin9 with variable frequency driven pun,ps is a classical illustration that evolution in technical products takes place not only because of changes in the processes served by these products, or because of innovations...-pole 3550 rpm squirrel caqe induction motor became available in the early 1930s that high pressure pumps operating at that speed could be buil t. And now, in the 1980s, the development of the solid-state, variable frequency electric motor drive...

Karassik, I. J.; Petraccaro, L. L.; McGuire, J. T.

200

Electric Drive Vehicles: A Huge New Distributed Energy Resource  

E-Print Network [OSTI]

with electric power generation and storage capabilities · Three Vehicle Types in Program ­ Full ZEV: true zero) #12;Electric Drive in Vehicles -- All the Ingredients for a Distributed Power System #12;Vehicle and energy storage potential · Electric vehicle charge stations: grid connection points for power

Firestone, Jeremy

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

power electronics and machines | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Power Electronics and Electrical Machines Improvements in electric traction drives are essential to electric drive vehicles, and have the potential to significantly reduce...

202

A motor drive control system for the Lidar Polarimeter  

E-Print Network [OSTI]

and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30 30 34 34 Design Consideration. The DC Power Amplifier. System Operation. Scan System Alignment... and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30 30 34 34 Design Consideration. The DC Power Amplifier. System Operation. Scan System Alignment...

Leung, Waiming

2012-06-07T23:59:59.000Z

203

Aerospace Power & Electronics Simulation Workshop 2004 Satellite Attitude Control  

E-Print Network [OSTI]

Aerospace Power & Electronics Simulation Workshop 2004 · Satellite Attitude Control System Design Using Reaction Wheels Bhanu Gouda Brian Fast Dan Simon #12;2Aerospace Power & Electronics Simulation;3Aerospace Power & Electronics Simulation Workshop 2004 ADCS ·ADCS: Attitude Determination and Control

Simon, Dan

204

Test Drive: Honda FCX Clarity | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity May 14, 2010 - 10:52am Addthis A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal Paul Lester Communications Specialist for the Office of Energy Efficiency and Renewable Energy Stepping into the driver's seat of the hydrogen powered Honda FCX Clarity is like stepping into the future. A glowing blue 3-D dashboard displays hydrogen and battery levels and a power button fires up fuel cells that provide electricity. An advanced braking system warns the driver about

205

Test Drive: Honda FCX Clarity | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity Test Drive: Honda FCX Clarity May 14, 2010 - 10:52am Addthis A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal A member of the Energy Empowers team takes the Honda FCX Clarity for a drive outside the U.S. Department of Energy in Washington, D.C. | Photo by Sunita Satyapal Paul Lester Communications Specialist, Office of Energy Efficiency and Renewable Energy Stepping into the driver's seat of the hydrogen powered Honda FCX Clarity is like stepping into the future. A glowing blue 3-D dashboard displays hydrogen and battery levels and a power button fires up fuel cells that provide electricity. An advanced braking system warns the driver about

206

Power Grid Growth and Evolution  

Science Journals Connector (OSTI)

This chapter models and analyzes in detail the slow dynamics in power grids. The driving forces for power grid evolutions are identified and then utilized to construct the general evolution model for complex power grids

Shengwei Mei; Xuemin Zhang; Ming Cao

2011-01-01T23:59:59.000Z

207

The Study of Wheeled Semi-trailer Design and Development Based on Scale Model  

Science Journals Connector (OSTI)

One type of wheeled semi-trailer is a complex system which consists of ... design process. In the structural design of hydraulic torque converter, we use the hierarchical multi...4). ...

Xiong Xin; Xuexun Guo

2013-01-01T23:59:59.000Z

208

KINEMATIC CONTROL OF A NONHOLONOMIC WHEELED MOBILE MANIPULATOR A DIFFERENTIAL FLATNESS APPROACH  

E-Print Network [OSTI]

maintenance robots to robotic earth-moving excavators to free-flying satellite-repair robots, have capitalized of operation make disk wheels popular, the kinematics of rolling contact creates nonholonomic constraints

Krovi, Venkat

209

Power system  

DOE Patents [OSTI]

A power system includes a prime mover, a transmission, and a fluid coupler having a selectively engageable lockup clutch. The fluid coupler may be drivingly connected between the prime mover and the transmission. Additionally, the power system may include a motor/generator drivingly connected to at least one of the prime mover and the transmission. The power-system may also include power-system controls configured to execute a control method. The control method may include selecting one of a plurality of modes of operation of the power system. Additionally, the control method may include controlling the operating state of the lockup clutch dependent upon the mode of operation selected. The control method may also include controlling the operating state of the motor/generator dependent upon the mode of operation selected.

Hickam, Christopher Dale (Glasford, IL)

2008-03-18T23:59:59.000Z

210

Switched reluctance motor drive circuit evaluation criteria for vehicle efficiency responsiveness.  

E-Print Network [OSTI]

??This thesis intends to examine the principles of operation for switched reluctance machines (SRM) and examine the power electronic drive circuits that control them, in (more)

Cunningham, John David

2011-01-01T23:59:59.000Z

211

Direction and control adjustment for smooth motion of wheeled mobile robots  

Science Journals Connector (OSTI)

Control of wheeled mobile robots (differential or steering wheel structure) has been studied extensively in the last decades, and many control strategies were proposed for various applications. This paper will present the solutions to two issues encountered in the implementation of the controllers: over corrections of the robot's heading direction and saturation of the control efforts. The solutions to the problems and their experimental verifications are provided.

L. Huang

2010-01-01T23:59:59.000Z

212

Co-Simulation of an Electric Traction Drive Christoph Schulte and Joachim Bocker  

E-Print Network [OSTI]

Co-Simulation of an Electric Traction Drive Christoph Schulte and Joachim B¨ocker Abstract--For the simulation of electrical drives, reduced- order models or simple look-up tables are often used in order) for an electric drive, where the control structure, power electronics and motor are modeled in different environ

Paderborn, Universität

213

Drive alignment pays maintenance dividends  

SciTech Connect (OSTI)

Proper alignment of the motor and gear drive on conveying and processing equipment will result in longer bearing and coupling life, along with lower maintenance costs. Selecting an alignment free drive package instead of a traditional foot mounted drive and motor is a major advancement toward these goals. 4 photos.

Fedder, R. [Rexnord Industries, Milwaukee, WI (United States)

2008-12-15T23:59:59.000Z

214

Electric Drive Transportation Association Conference | Department...  

Energy Savers [EERE]

Association Conference Electric Drive Transportation Association Conference Addthis Test Drive 1 of 5 Test Drive Deputy Assistant Secretary for Transportation Reuben Sarkar...

215

Driving Innovation through Federal  

Broader source: Energy.gov (indexed) [DOE]

2 USS Nautilus, the world's first nuclear powered submarine (1954) The B61 tactical thermonuclear gravity bomb Core Capabilities 3 Visualizations of a supernova, developed at...

216

Journal of Power Sources xxx (2005) xxxxxx Vehicle-to-grid power fundamentals: Calculating capacity  

E-Print Network [OSTI]

; Vehicle-to-grid power; Ancillary services; V2G 1. Introduction The electric power grid and light vehicle-drive vehicles (EDVs), that is, vehicles with an electric-drive motor powered by batteries, a fuel cellJournal of Power Sources xxx (2005) xxx­xxx Vehicle-to-grid power fundamentals: Calculating

Firestone, Jeremy

217

Depolarizing the debate: Can retail wheeling co-exist with integrated resource planning?  

SciTech Connect (OSTI)

Antagonists in the retail wheeling debate share a disgruntlement with the present industry structure and a desire to rely more on competition to achieve savings and efficiencies. But the critical question - is retail electric service a natural monopoly? - must be answered in the negative if retail competition is to be efficient. Only then should one go on to examine how such a regime might be structured. This article offers an approach to retail wheeling that is grounded in principles shared by both sides: economic efficiency, nondiscrimination and fairness to customers and shareholders. The article then turns to the source of both sides` disgruntlement: the industry`s illogical structure. This article discusses four principles: (1) Where retail electric service is a natural monopoly, unconditioned retail wheeling is inefficient; (2) Most arguments for unconditioned retail wheeling substitute a pecuniary interest for the public interest; (3) Efficient retail procurement within a natural retail monopoly must be consistent with an integrated resource plan; (4) As presently framed, the retail wheeling debate does not confront the electric industry`s structural flaws.

Hempling, S.

1994-04-01T23:59:59.000Z

218

Thermal performance of oil spray cooling system for in-wheel motor in electric vehicles  

Science Journals Connector (OSTI)

Abstract The cooling of the motor in an in-wheel system is critical to its performance and durability. In the present study, the shape of the channel in the hollow shaft for the oil spray cooling of a high-capacity 35kW in-wheel motor was optimized, and the thermal performance of the motor was evaluated by numerical analysis and experiments. The thermal flow was analyzed by evaluating the thermal performance of two conventional cooling models of in-wheel motors under conditions of continuous rating base speed. For conventional model #1, in which the cooling oil is stagnant in the lower end of the motor, the maximum temperature of the coil was 221.7C. For conventional model #2, in which the cooling oil circulates through the exit and entrance of the housing and jig, the maximum temperature of the coil was 155.4C. Both models thus proved to be unsuitable for in-wheel motors because the motor control specifications limit the maximum temperature to 150C. We designed and manufactured an enhanced model for in-wheel motors, which we equipped with an optimized channel for the oil spray cooling mode, and evaluated its thermal performance under continuous rating conditions. The maximum temperatures of the coil at the base and maximum speeds, which were set as the design points, were below the motor temperature limit, being 138.1 and 137.8C, respectively.

Dong Hyun Lim; Sung Chul Kim

2014-01-01T23:59:59.000Z

219

Electric Drive Vehicle Demonstration and Vehicle Infrastructure...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation 2010 DOE Vehicle Technologies...

220

Next Generation Environmentally Friendly Driving Feedback Systems...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Next Generation Environmentally Friendly Driving Feedback Systems Research and Development Next Generation Environmentally Friendly Driving Feedback Systems Research and...

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Fast-Wave Current Drive in a Toroidal Plasma  

Science Journals Connector (OSTI)

Fast-wave current drive is demonstrated in the Princeton ACT-I toroidal device. The fast Alfvn wave, in the range of high ion-cyclotron harmonics, produced 40 A of current from 1 kW of rf power coupled into a plasma by a fast-wave loop antenna. This wave excites a steady current by damping on the energetic tail of the electron distribution function in the same way as lower-hybrid current drive, except that fast-wave current drive is appropriate for higher plasma densities.

J. Goree; M. Ono; P. Colestock; R. Horton; D. McNeill; H. Park

1985-10-14T23:59:59.000Z

222

DOE Hydrogen and Fuel Cells Program: Well-to-Wheels Case Studies for  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Hydrogen Production Hydrogen Production Hydrogen Delivery Hydrogen Storage Hydrogen Manufacturing Fuel Cells Applications/Technology Validation Safety Codes and Standards Education Basic Research Systems Analysis Analysis Repository H2A Analysis Hydrogen Analysis Resource Center Scenario Analysis Well-to-Wheels Analysis Systems Integration U.S. Department of Energy Search help Home > Systems Analysis > Well-to-Wheels Analysis Printable Version Well-to-Wheels Case Studies for Hydrogen Pathways The ultimate goal is for hydrogen to be produced and delivered utilizing several feedstocks, processing methods, and delivery options at a variety of scales ranging from large central production to very small local (distributed) production, depending on what makes the most economic and logistical sense for a given location. These parameters and the

223

Experimental characterization of mechanical vibrations and acoustical noise generated by defective automotive wheel hub bearings  

Science Journals Connector (OSTI)

Wheel hub bearing faults in passenger cars cause chattering at the corresponding wheel, increase chassis vibration and generate high noise levels inside the car cabin. In this paper a series of in-situ test with defective and healthy wheel hub bearings were conducted. Mechanical vibrations and sound were measured and data were analyzed with a number of signal processing methods in frequency and time-frequency domains. Additionally, a statistical signal processing method was also performed. The results of the various methods are compared and it was found that most of the methods used in this work are well suited for the analysis. Some methods, however, show certain limitations with respect to their informative value and their ability of implementation.

Eduardo Rubio; Juan C. Juregui

2012-01-01T23:59:59.000Z

224

Adjustable speed drive for residential applications  

SciTech Connect (OSTI)

This paper describes a demonstration of an adjustable speed drive suitable for use in residential applications such as compressors and fans in heat pumps, air conditioners, and refrigerators. The adjustable speed drive uses only a four-diode rectifier and a six-transistor six-diode inverter and does not require a source-frequency filter inductor or capacitor. Motor speed is adjusted with source-frequency phase control eliminating the switching loss and electromagnetic interference caused by the more commonly used high-frequency pulse-width modulation. Low source-current distortion and high power factor are obtained at a full-load operating point which is found using a parametric analysis.

Jungreis, A.M.; Kelley, A.W. [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering] [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

225

Connecting the Mobile World Drive Train Developments and  

E-Print Network [OSTI]

Cost Power Modules #12;Ve h i c u l a r Te c h n o l o g y S o c i e t y Diesel ICE and MotorConnecting the Mobile World Drive Train Developments and Opportunities: Power Electronics, 2013 Connecting the Mobile World #12;Ve h i c u l a r Te c h n o l o g y S o c i e t y Power EDT

California at Davis, University of

226

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel Inverted Pendulum  

E-Print Network [OSTI]

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel underac- tuated mechanical system: the inertia wheel inverted pendulum. Numerical simulations as well: the ball and beam [9] (where the dynamics of the beam has not been taken into account) and the Planar

Paris-Sud XI, Université de

227

Well-to-wheels analysis of energy use and greenhouse gas emissions of plug-in hybrid electric vehicles.  

SciTech Connect (OSTI)

Plug-in hybrid electric vehicles (PHEVs) are being developed for mass production by the automotive industry. PHEVs have been touted for their potential to reduce the US transportation sector's dependence on petroleum and cut greenhouse gas (GHG) emissions by (1) using off-peak excess electric generation capacity and (2) increasing vehicles energy efficiency. A well-to-wheels (WTW) analysis - which examines energy use and emissions from primary energy source through vehicle operation - can help researchers better understand the impact of the upstream mix of electricity generation technologies for PHEV recharging, as well as the powertrain technology and fuel sources for PHEVs. For the WTW analysis, Argonne National Laboratory researchers used the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed by Argonne to compare the WTW energy use and GHG emissions associated with various transportation technologies to those associated with PHEVs. Argonne researchers estimated the fuel economy and electricity use of PHEVs and alternative fuel/vehicle systems by using the Powertrain System Analysis Toolkit (PSAT) model. They examined two PHEV designs: the power-split configuration and the series configuration. The first is a parallel hybrid configuration in which the engine and the electric motor are connected to a single mechanical transmission that incorporates a power-split device that allows for parallel power paths - mechanical and electrical - from the engine to the wheels, allowing the engine and the electric motor to share the power during acceleration. In the second configuration, the engine powers a generator, which charges a battery that is used by the electric motor to propel the vehicle; thus, the engine never directly powers the vehicle's transmission. The power-split configuration was adopted for PHEVs with a 10- and 20-mile electric range because they require frequent use of the engine for acceleration and to provide energy when the battery is depleted, while the series configuration was adopted for PHEVs with a 30- and 40-mile electric range because they rely mostly on electrical power for propulsion. Argonne researchers calculated the equivalent on-road (real-world) fuel economy on the basis of U.S. Environmental Protection Agency miles per gallon (mpg)-based formulas. The reduction in fuel economy attributable to the on-road adjustment formula was capped at 30% for advanced vehicle systems (e.g., PHEVs, fuel cell vehicles [FCVs], hybrid electric vehicles [HEVs], and battery-powered electric vehicles [BEVs]). Simulations for calendar year 2020 with model year 2015 mid-size vehicles were chosen for this analysis to address the implications of PHEVs within a reasonable timeframe after their likely introduction over the next few years. For the WTW analysis, Argonne assumed a PHEV market penetration of 10% by 2020 in order to examine the impact of significant PHEV loading on the utility power sector. Technological improvement with medium uncertainty for each vehicle was also assumed for the analysis. Argonne employed detailed dispatch models to simulate the electric power systems in four major regions of the US: the New England Independent System Operator, the New York Independent System Operator, the State of Illinois, and the Western Electric Coordinating Council. Argonne also evaluated the US average generation mix and renewable generation of electricity for PHEV and BEV recharging scenarios to show the effects of these generation mixes on PHEV WTW results. Argonne's GREET model was designed to examine the WTW energy use and GHG emissions for PHEVs and BEVs, as well as FCVs, regular HEVs, and conventional gasoline internal combustion engine vehicles (ICEVs). WTW results are reported for charge-depleting (CD) operation of PHEVs under different recharging scenarios. The combined WTW results of CD and charge-sustaining (CS) PHEV operations (using the utility factor method) were also examined and reported. According to the utility factor method, the share of vehicle miles trav

Elgowainy, A.; Han, J.; Poch, L.; Wang, M.; Vyas, A.; Mahalik, M.; Rousseau, A.

2010-06-14T23:59:59.000Z

228

Designing a high-efficiency hydrostatic bicycle transmission  

E-Print Network [OSTI]

Hydrostatic bicycle drives use a working fluid instead of the common roller-chain to transmit power to the drive wheel. These transmissions are typically considered too inefficient for human power applications. An experiment ...

Socks, Matthew T. (Matthew Tristram)

2006-01-01T23:59:59.000Z

229

Geothermal Power Generation  

SciTech Connect (OSTI)

The report provides an overview of the renewed market interest in using geothermal for power generation including a concise look at what's driving interest in geothermal power generation, the current status of geothermal power generation, and plans for the future. Topics covered in the report include: an overview of geothermal power generation including its history, the current market environment, and its future prospects; an analysis of the key business factors that are driving renewed interest in geothermal power generation; an analysis of the challenges that are hindering the implementation of geothermal power generation projects; a description of geothermal power generation technologies; a review of the economic drivers of geothermal power generation project success; profiles of the major geothermal power producing countries; and, profiles of the major geothermal power project developers.

NONE

2007-11-15T23:59:59.000Z

230

Overmodulation in Current Controlled Drives  

E-Print Network [OSTI]

220 Chapter 5 Overmodulation in Current Controlled Drives 5.1 Introduction The performance of voltage feedforward controlled constant V f PWM-VSI drives is insu cient for most industrial processes performance control methods. Electric traction, el- evators, textile machines, paper and plastic machines

Hava, Ahmet

231

PowerPoint Presentation  

Broader source: Energy.gov (indexed) [DOE]

U.S. Department of Energy Electricity Advisory Committee October 20, 2011 Bob Lasseter Emeritus Professor University of Wisconsin-Madison DER Technologies Dispatchable Sources * Small internal combustion-engine generator * Small gas turbines generators * Microturbines * Fuel cells Intermittent Sources *Wind turbines *Photovoltaic Storage *Batteries, Ultra-capacitors *Fly-wheels How do we deal with 100,000+ DER units? Cluster Loads & DER (interfaced to the grid using a fast switch) * Microgrids provide the most promising means of integrating large amounts of distributed sources into the power grid * Microgrids open the door to significant system efficiency

232

Utilities Drive Solar Projects  

Science Journals Connector (OSTI)

The second quarter was the largest ever for utility photovoltaic installations in the U.S. Demand for solar electricity from power companies drove a 45% increase in solar installations compared with the first quarter and a 116% increase from last years ...

MELODY BOMGARDNER

2012-09-16T23:59:59.000Z

233

Efficient Energy Management: Is Variable Frequency Drives the Solution  

Science Journals Connector (OSTI)

Abstract Over the last few years the cost of power electricity has increased significantly. Researchers and manufacturers of electrical goods have been trying to find ways to minimize the use of power electricity while maintaining the efficiency of electrical equipments. To provide efficient energy management for today's market, manufacturers are now turning to a technology known as variable frequency drives (VFDs). \\{VFDs\\} are being used for various equipments ranging from small electrical appliances to the largest of mine mill drives and compressors. Household air conditioning compressors, for example, are not short of running on VFD technology. This concept paper will discuss the alternative use of this energy.

Nasir Khalid

2014-01-01T23:59:59.000Z

234

ION 2006, Fort Worth TX, 26-29 September 2006 1 GPS/INS/G Sensors/Yaw Rate Sensor/Wheel  

E-Print Network [OSTI]

of four integration strategies, namely a GPS/INS integrated system, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with two non- holonomic constraints, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with the removal of the lateral constraint

Calgary, University of

235

Top drive drilling systems  

SciTech Connect (OSTI)

This patent describes a well apparatus which consists of: a back-up tool for holding the upper end of a string of pipe against rotating as an additional section of pipe is connected thereto; and powered means for moving the tool to engage the upper end of the string: the powered means being operable through a predetermined range of movement, and acting to move the back-up tool vertically during an initial portion of the range of movement and then move the tool between an active position at the axis of the well and a retracted position offset to a side of the axis at the end of the range of movement.

Boyadjieff, G.I.

1986-08-12T23:59:59.000Z

236

Operations with the new FUSE observatory: three-axis control with one reaction wheel  

E-Print Network [OSTI]

control system, particularly those of gyroscopes and reaction wheels, have made science operations in all three axes. Jitter values of no more than ±1 arcsecond in pitch, ±10 arcsecond in yaw, and ±1-516-8503; fax 410-516-5494; http://fuse.pha.jhu.edu #12;The FUSE Attitude Control System (ACS) contains two sets

237

Omnidirectional locomotion and traction control of the wheel-driven, wall-climbing robot, cromsci  

Science Journals Connector (OSTI)

Safe and cost-efficient inspection of large concrete buildings is a great challenge for mobile robots. This paper presents the locomotion system of the climbing robot, Cromsci, which uses three steerable standard wheels and negative pressure ... Keywords: Control of robotic systems, Force control, Mobile robots, Novel applications of robotics, Service robots

D. Schmidt; C. Hillenbrand; K. Berns

2011-12-01T23:59:59.000Z

238

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J applications. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where and static force Jacobians; normal forces. JACOBIAN DES ROUES MECANUM DU PLATFORME DE MOTION ATLAS DANS LES

Hayes, John

239

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where orienting force Jacobians; normal forces. MATRICE JACOBIENNE DES ROUES MECANUM SIMULATOUR DE MOUVEMENT ATLAS DANS

Hayes, John

240

Continuous Control Primitive Trajectory Generation and Optimal Motion Splines for All-Wheel Steering Mobile  

E-Print Network [OSTI]

on the Rocky 8 rover platform, where parameterized linear velocity, curvature, and path heading controls of the wheels are steerable (e.g. Rocky 8, shown), the body can rotate about any point in the local tangent has dealt with finding obstacle-free paths subject to nonholnomic constraints assuming flat terrain

Kelly, Alonzo

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Advanced insulated gate bipolar transistor gate drive  

DOE Patents [OSTI]

A gate drive for an insulated gate bipolar transistor (IGBT) includes a control and protection module coupled to a collector terminal of the IGBT, an optical communications module coupled to the control and protection module, a power supply module coupled to the control and protection module and an output power stage module with inputs coupled to the power supply module and the control and protection module, and outputs coupled to a gate terminal and an emitter terminal of the IGBT. The optical communications module is configured to send control signals to the control and protection module. The power supply module is configured to distribute inputted power to the control and protection module. The control and protection module outputs on/off, soft turn-off and/or soft turn-on signals to the output power stage module, which, in turn, supplies a current based on the signal(s) from the control and protection module for charging or discharging an input capacitance of the IGBT.

Short, James Evans (Monongahela, PA); West, Shawn Michael (West Mifflin, PA); Fabean, Robert J. (Donora, PA)

2009-08-04T23:59:59.000Z

242

Fast wave current drive in DEMO  

SciTech Connect (OSTI)

The ability to non-inductively drive a large fraction of the toroidal plasma current in magnetically confined plasmas is an essential requirement for steady state fusion reactors such as DEMO. Besides neutral beam injection (NBI), electron-cyclotron resonance heating (ECRH) and lower hybrid wave heating (LH), ion-cyclotron resonance heating (ICRH) is a promising candidate to drive current, in particular at the high temperatures expected in fusion plasmas. In this paper, the current drive (CD) efficiencies calculated with coupled ICRF wave / CD numerical codes for the DEMO-1 design case (R{sub 0}=9m, B{sub 0}=6.8T, a{sub p}=2.25m) [1] are presented. It will be shown that although promising CD efficiencies can be obtained in the usual ICRF frequency domain (20-100MHz) by shifting the dominant ion-cyclotron absorption layers to the high-field side, operation at higher frequencies (100-300MHz) has a stronger CD potential, provided the parasitic RF power absorption of the alpha particles can be minimized.

Lerche, E.; Van Eestera, D.; Messiaen, A. [Association EURATOM-Belgian State, LPP-ERM/KMS, TEC partner, Brussels (Belgium); Franke, T. [Max-Planck-Institut fr Plasmaphysik, EURATOM-Assoziation, Garching (Germany); Collaboration: EFDA-PPPT Contributors

2014-02-12T23:59:59.000Z

243

MHK Technologies/Anaconda bulge tube drives turbine | Open Energy  

Open Energy Info (EERE)

Anaconda bulge tube drives turbine Anaconda bulge tube drives turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Anaconda bulge tube drives turbine.jpg Technology Profile Primary Organization Checkmate SeaEnergy Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description Anaconda uses a large water filled distensible rubber tube floating just beneath the ocean surface and oriented parallel to wave direction As a wave passes the bulge tube is lifted with the surrounding water and this causes a bulge wave to be excited which then passes down the tubes walls gathering energy from the ocean wave as it passes By matching the speed of the bulge wave to that of the sea wave resonance is achieved and high power capture becomes possible The bulge waves are then used to drive a turbine generator located at the stern of the device

244

36 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 35, NO. 1, JANUARY/FEBRUARY 1999 Multilevel Converters for Large Electric Drives  

E-Print Network [OSTI]

Converters for Large Electric Drives Leon M. Tolbert, Senior Member, IEEE, Fang Zheng Peng, Senior Member multilevel con- verters as an application for high-power and/or high-voltage electric motor drives all-electric drives because it uses several levels of dc voltage sources, which would be available

Tolbert, Leon M.

245

Direct-Drive Inerital Confinement Fusion Research at the Laboratory for Laser Energetics: Charting the Path to Thermonuclear Ignition  

SciTech Connect (OSTI)

Significant theoretical and experimental progress continues to be made at the University of Rocheter's Laboratory for Laser Energetics (LLE), charting the path to direct-drive inertial confinement fusion (ICF) ignition. Direct drive offers the potential for higher-gain implosions than x-ray drive and is a leading candidate for an inertial fusion enery power plant.

McCrory, R.L.; Regan, S.P.; Loucks, S.J.; Meyerhofer, D.D.; Skupsky, S.; Betti, R.; Boehly, T.R.; Craxton, R.S.; Collins, T.J.B.; Delettrez, J.A.; Edgell, D.; Epstein, R.; Fletcher, K.A.; Freeman, C.; Frenje, J.A.; Glebov, V.Yu.; Goncharov, V.N.; Harding, D.R.; Igumenshchev, I.V.; Keck, R.L.; Kilkenny, J.D.; Knauer, J.P.; Li, C.K.; Marciante, J.; Marozas, J.A.; Marshall, F.J.; Maximov, A.V.; McKenty, P.W.; Myatt, J.; Padalino, S.; Petrasso, R.D.; Radha, P.B.; Sangster, T.C.; Seguin, F.H.; Seka, W.; Smalyuk, V.A.; Soures, J.M.; Stoeckl, C.; Yaakobi, B.; Zuegel, J.D.

2005-10-07T23:59:59.000Z

246

FULL FUEL CYCLE ASSESSMENT: WELL-TO-WHEELS ENERGY INPUTS,  

E-Print Network [OSTI]

California Electric Transportation Coalition California Fuel Cell Partnership California Invasive Plant Systems Inc Electric Power Research Institute Energy Independence Now Exxon Mobil Ferrellgas-Blue Rhino First Southwest Company Ford Motor Co. Friends of the Earth/Blue Water Network General Motors

247

Driving Green com | Open Energy Information  

Open Energy Info (EERE)

Driving Green com Jump to: navigation, search Name: Driving Green.com Place: Melbourne, Florida Zip: 32904 Sector: Vehicles Product: Driving green.com is a website that allows...

248

Energy Department Announces $60 Million to Drive Affordable, Efficient  

Broader source: Energy.gov (indexed) [DOE]

60 Million to Drive Affordable, 60 Million to Drive Affordable, Efficient Solar Power Energy Department Announces $60 Million to Drive Affordable, Efficient Solar Power October 22, 2013 - 11:45am Addthis News Media Contact (202) 586-4940 WASHINGTON - Building on President Obama's broad-based plan to cut carbon pollution and support clean energy innovation across the country, Energy Secretary Moniz announced today about $60 million to support innovative solar energy research and development. As part of the Department's SunShot Initiative, these awards will help lower the cost of solar electricity, advance seamless grid integration and support a growing U.S. solar workforce. "The tremendous growth in the U.S. solar industry over the past few years is helping to pave the way to a cleaner, more sustainable energy future

249

ARM - SGP Rural Driving Hazards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rural Driving Hazards Rural Driving Hazards SGP Related Links Facilities and Instruments Central Facility Boundary Facility Extended Facility Intermediate Facility Radiometric Calibration Facility Geographic Information ES&H Guidance Statement Operations Science Field Campaigns Visiting the Site Fact Sheet Images Information for Guest Scientists Contacts SGP Rural Driving Hazards The rural location of the Southern Great Plains (SGP) site facilities requires that visitors travel on unpaved, dirt and gravel, roads. Visitors should be aware of the driving hazards this presents by taking the following precautions: Proceed cautiously: Many rural roads have unmarked and blind intersections. Slow down: Sanded and gravel raods can cause a vehicle to swerve. Maintain a safe following distance: During the dry season, vehicles

250

Induction-drive magnetohydrodynamic propulsion  

Science Journals Connector (OSTI)

The use of magnetohydrodynamic propulsion for marine applications is reviewed with emphasis on induction- ... . Comparisons are made with direct-drive MHD propulsion systems. Application to pumps for hazardous fl...

D. L. Mitchell; D. U. Gubser

1993-08-01T23:59:59.000Z

251

Adjustable Speed Drive Industrial Applications  

E-Print Network [OSTI]

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost...

Poole, J. N.

252

Direct Drive Systems DDS | Open Energy Information  

Open Energy Info (EERE)

Systems DDS Systems DDS Jump to: navigation, search Name Direct Drive Systems (DDS) Place Cerritos, California Zip CA 90703 Product Manufactures high speed, permanent magnet (PM), high-power motors, generators and power electronics. Coordinates 33.868545°, -118.063704° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.868545,"lon":-118.063704,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

253

Grand Challenge Portfolio: Driving Innovations in Industrial...  

Broader source: Energy.gov (indexed) [DOE]

Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

254

Advanced Electric Drive Vehicle Education Program | Department...  

Broader source: Energy.gov (indexed) [DOE]

Advanced Electric Drive Vehicle Education Program Advanced Electric Drive Vehicle Education Program 2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer...

255

Advanced Electric Drive Vehicles | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt039schwendeman2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles Advanced Electric Drive Vehicles Energy & Manufacturing Workforce...

256

Integrated Biogeochemical and Hydrologic Processes Driving Arsenic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biogeochemical and Hydrologic Processes Driving Arsenic Release from Shallow Sediments to Groundwaters of the Mekong Integrated Biogeochemical and Hydrologic Processes Driving...

257

Granular Gases under Extreme Driving W. Kang,1,  

E-Print Network [OSTI]

in two dimensions using event-driven molecular dynamics simulations. Our focus is the nature parameters. We conclude that driving by rare but powerful energy injection leads to a well-mixed gas-state, energy cascades from large to small scales. Our simulations also show that when the injection rate

Ben-Naim, Eli

258

Semiconductor converters of electric energy electromagnetic and electromechanical processes in an electric drive under frequency converter parallel operation to induction motor  

Science Journals Connector (OSTI)

The processes occurring in the two PWM-controlled frequency converters operating in parallel to an induction motor in the high-power electric drives start and self-start modes ... current consumed from the suppl...

D. V. Belyaev; A. M. Veinger; G. B. Lazarev

2007-05-01T23:59:59.000Z

259

NREL: Transportation Research - Power Electronics and Electric...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

decreasing costs. Photo by Dennis Schroeder, NREL NREL's power electronics and electric machines research focuses on systems for electric-drive vehicles (EDVs) that...

260

Black Hills Power- Commercial Energy Efficiency Programs  

Broader source: Energy.gov [DOE]

Black Hills Power provides rebates for its commercial customers who install energy efficient heat pumps, motors, variable frequency drives, lighting, and water heaters. Custom rebates for approved...

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Vehicle Technologies Office: 2013 Advanced Power Electronics...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

technologies now under development. Research is focused on developing revolutionary new power electronics (PE), electric motor, and traction drive system (TDS) technologies that...

262

6 - Control systems for AC variable speed drives  

Science Journals Connector (OSTI)

Publisher Summary This chapter explores the control system, embodied in the control circuits. The simplest method of providing auxiliary power to the converter control circuits is from an auxiliary transformer connected to the mains. The primary need for current feedback in general purpose variable speed drives (VSDs) is inverter switching device protection. Various disadvantages of the vector controlled AC drive as compared to a DC drive are discussed in the chapter. The strategy of an AC vector control drive is to calculate the individual current vectors to eventually enable separate control of the flux current and the torque current under all speed and load conditions. The power circuit for a vector converter is almost identical to that used by a variable voltage variable frequency (VVVF) drive. High accuracy motor current feedback is also necessary to provide control of motor torque. DC bus current feedback is suitable for switching device protection and current limiting in most AC VSDs. Analog speed transducers are increasingly being replaced by digital devices, which are more compatible with modern digital control systems.

Malcolm Barnes

2003-01-01T23:59:59.000Z

263

Radio-Frequency Current Drive in a Fusion-Producing Plasma  

Science Journals Connector (OSTI)

A method for driving current in a fusion-producing plasma is proposed. Radio-frequency power is used to prohibit fusion-produced energetic particles from slowing down isotropically or to push them in a preferential direction. As a result, a net plasma current is generated whose efficiency is comparable to other current drive schemes.

D. K. Bhadra and C. Chu

1982-06-28T23:59:59.000Z

264

Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles  

E-Print Network [OSTI]

Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles A. Kolli1 , Student Magnet Synchronous Machine in Electric Vehicle application. First, a short survey of existing power control methods are compared with three innovative ones using EV-drive specifications in the normal

Paris-Sud XI, Université de

265

warned that the world was asleep at the wheel. Back then, only two countries had plans to test  

E-Print Network [OSTI]

warned that the world was asleep at the wheel. Back then, only two countries had plans to test in a hospital examin- ing room in Rochester, New York. Pressing a ball of cotton into the crook of her elbow

Cai, Long

266

Washboard Road: The Dynamics of Granular Ripples Formed by Rolling Wheels Nicolas Taberlet,1,2,* Stephen W. Morris,3  

E-Print Network [OSTI]

surface under tangential stress is reminiscent of other sorts of wind- and water-driven ripples [2 inclination remained confined between 70 and 90 , so that the wheel motion was almost vertic

McElwaine, Jim

267

CLEAN HYDROGEN TECHNOLOGY FOR 3-WHEEL TRANSPORTATION IN INDIA  

SciTech Connect (OSTI)

Hydrogen is a clean burning, non-polluting transportation fuel. It is also a renewable energy carrier that can be produced from non-fossil fuel resources such as solar, wind and biomass. Utilizing hydrogen as an alternative fuel for vehicles will diversify the resources of energy, and reduce dependence on oil in the transportation sector. Additionally, clean burning hydrogen fuel will also alleviate air pollution that is a very severe problem in many parts of world, especially major metropolitan areas in developing countries, such as India and China. In our efforts to foster international collaborations in the research, development, and demonstration of hydrogen technologies, through a USAID/DOE cost-shared project, Energy Conversion Devices, Inc.,(www.ovonic.com) a leading materials and alternative energy company, in collaboration with Bajaj Auto Limited, India's largest three-wheeler taxi manufacturer, has successfully developed and demonstrated prototype hydrogen ICE three-wheelers in the United States and India. ECD's proprietary Ovonic solid-state hydrogen storage technology is utilized on-board to provide a means of compact, low pressure, and safe hydrogen fuel. These prototype hydrogen three-wheelers have demonstrated comparable performance to the original CNG version of the vehicle, achieving a driving range of 130 km. The hydrogen storage system capable of storing 1 kg hydrogen can be refilled to 80% of its capacity in about 15 minutes at a pressure of 300 psi. The prototype vehicles developed under this project have been showcased and made available for test rides to the public at exhibits such as the 16th NHA annual meeting in April 2005, Washington, DC, and the SIAM (Society of Indian Automotive Manufacturers) annual conference in August 2005, New Delhi, India. Passengers have included members of the automotive industry, founders of both ECD and Bajaj, members of the World Bank, the Indian Union Minister for Finance, the President of the Asia Development Bank, members of USAID, USDOE and many other individuals, all of whom have had praise for the vehicle and the technology. The progress made through this phase I work and the importance of hydrogen three-wheelers has also resulted in extensive press coverage by the news media around the world.

Krishna Sapru

2005-11-15T23:59:59.000Z

268

Energy Wheel Performance and Optimization Opportunities for SDVAV AHU's In a Hot & Humid Climate  

E-Print Network [OSTI]

0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 72 74 76 78 80 82 84 86 88 90 92 94 96 98 100 W h e e l E f f e c t i v e n e s s OAT, oF Eff.-Sensible Eff.-Latent Eff.-Total Results (Cont.) ? Effectiveness... vs. Wheel VFD Speed 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 20 30 40 50 60 70 80 90 100 W h e e l E f f e c t i v e n e s s Wheel VFD Speed, % (100%=60 HZ) Eff. Sensible Eff.Latent Eff.Total 8 Results (field...

Zhao, J.; Wang, L.; Watt, J.

2012-01-01T23:59:59.000Z

269

Lyapunov function-based non-linear control for two-wheeled mobile robots  

Science Journals Connector (OSTI)

This article presents a non-linear feedback control framework for two-wheeled mobile robots. The approach uses a constructive Lyapunov function which allows the formulation of a control law with asymptotic stability of the equilibrium point of the system and a computable stability region. The dynamic equations are simplified through normalisation and partial feedback linearisation. The latter allows linearisation of only the actuated coordinate. Description of the control law is complemented by the stability analysis of the closed loop dynamics of the system. The effectiveness of the method has been illustrated by its good performance and less control demand through simulations conducted for two control tasks: upright position stabilisation and velocity tracking for a statically unstable two wheeled mobile robot.

Zareena Kausar; Karl Stol; Nitish Patel

2013-01-01T23:59:59.000Z

270

Distribution Drive | Open Energy Information  

Open Energy Info (EERE)

Drive Drive Jump to: navigation, search Name Distribution Drive Place Dallas, Texas Zip 75205 Product Biodiesel fuel distributor. Coordinates 32.778155°, -96.795404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.778155,"lon":-96.795404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

271

Kepler White Paper: Asteroseismology of Solar-Like Oscillators in a 2-Wheel Mission  

E-Print Network [OSTI]

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimi...

Chaplin, W J; Christensen-Dalsgaard, J; Gilliland, R L; Kawaler, S D; Basu, S; De Ridder, J; Huber, D; Arentoft, T; Schou, J; Garcia, R A; Metcalfe, T S; Brogaard, K; Campante, T L; Elsworth, Y; Miglio, A; Appourchaux, T; Bedding, T R; Hekker, S; Houdek, G; Karoff, C; Molenda-Zakowicz, J; Monteiro, M J P F G; Aguirre, V Silva; Stello, D; Ball, W; Beck, P G; Birch, A C; Buzasi, D L; Casagrande, L; Cellier, T; Corsaro, E; Creevey, O L; Davies, G R; Deheuvels, S; Dogan, G; Gizon, L; Grundahl, F; Guzik, J; Handberg, R; Jimenez, A; Kallinger, T; Lund, M N; Lundkvist, M; Mathis, S; Mathur, S; Mazumdar, A; Mosser, B; Neiner, C; Nielsen, M B; Palle, P L; Pinsonneault, M H; Salabert, D; Serenelli, A M; Shunker, H; White, T R

2013-01-01T23:59:59.000Z

272

Optimisation and comparison of integrated models of direct-drive linear machines for wave energy conversion  

E-Print Network [OSTI]

Combined electrical and structural models of five types of permanent magnet linear electrical machines suitable for direct-drive power take-off on wave energy applications are presented. Electromagnetic models were ...

Crozier, Richard Carson

2014-06-30T23:59:59.000Z

273

Fact #791: August 5, 2013 Comparative Costs to Drive an Electric...  

Broader source: Energy.gov (indexed) [DOE]

costs about three times less to drive an electric vehicle than a conventional gasoline-powered vehicle. The Department of Energy has created a new term, called the eGallon, to...

274

DOE and Industry Partners Drive the Design of an Innovative Drivetrain...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

gearbox connects to a medium-speed generator that uses a fraction of the rare-earth magnets typically used in direct-drive permanent-magnet generators of similar power....

275

Simulation Model for UltrasonicMotors powered by Resonant Converters  

E-Print Network [OSTI]

, H. Grotstollen Institute for Power Electronics and Electrical Drives, University of Paderborn, FB 14 such as high driving torque at low rotational speed, high holding torque without an applied electric power to optimize the overall drive performance by simulationand to develop suitable control strategies

Paderborn, Universität

276

ECE 461/2: Power Systems I Calculus and algebra  

E-Print Network [OSTI]

in a complex industrial load -Lab Experience with Power Electronic Motor Drives- Understands electric- or better Fields Power System Analysis Three-phase circuits Concepts: - Single and three phase electric with associated power Electronics drives Applications: - Employing PSSE to calculate power system flow, stability

Schumacher, Russ

277

Low-Cost U.S. Manufacturing of Power Electronics for Electric...  

Broader source: Energy.gov (indexed) [DOE]

Low-Cost U.S. Manufacturing of Power Electronics for Electric Drive Vehicles Low-Cost U.S. Manufacturing of Power Electronics for Electric Drive Vehicles 2010 DOE Vehicle...

278

Anomalous-viscosity current drive  

DOE Patents [OSTI]

The present invention relates to a method and apparatus for maintaining a steady-state current for magnetically confining the plasma in a toroidal magnetic confinement device using anomalous viscosity current drive. A second aspect of this invention relates to an apparatus and method for the start-up of a magnetically confined toroidal plasma.

Stix, T.H.; Ono, M.

1986-04-25T23:59:59.000Z

279

Intergral Drive Systems AG IDS | Open Energy Information  

Open Energy Info (EERE)

Intergral Drive Systems AG IDS Intergral Drive Systems AG IDS Jump to: navigation, search Name Intergral Drive Systems AG (IDS) Place Zurich, Swaziland Zip CH-8005 Sector Wind energy Product Zurich based producer of power electronics systems for wind turbines, PV plants, and propulsion systems. Coordinates 47.37706°, 8.53955° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.37706,"lon":8.53955,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

280

On the efficiency of electrical submersible pumps equipped with variable frequency drives: A field study  

SciTech Connect (OSTI)

A field study was conducted on 18 electrical-submersible-pump- (ESP-) equipped wells operating in the Williston basin. Fifteen of these wells were run with variable frequency drives (VFD`s). The purpose of the study was to determine the efficiency and operating characteristics of ESP`s operating with VFD`s and compare them to those without. Voltage, current, power, and frequency were measured at the drive input, the drive output, and ESP input. Production data were recorded and power and efficiency were calculated at all measurement locations and compared to published data.

Patterson, M.M. [Patterson (Maurice M.), Hemphill, TX (United States)

1996-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Comparison of AC drives for electric vehicles -- A report on experts` opinion survey  

SciTech Connect (OSTI)

It is recognized that wide applications of electric vehicles (EVs) will bring tremendous social, economical and ecological benefits. With the growing interests in electric vehicles, much effort is demanded for the development of efficient, reliable and economical AC drives` for EV propulsion purpose. Both induction motor (IM) drives and permanent magnet brushless DC motor (BDCM) drives have been applied to EVs. Switched reluctance motor (SRM) drives have been proposed as an alternative for EV propulsion. In order to assess the suitability of IM, BDCM and SRM drives for EV applications and to provide a technical support for the development and selection of future EV propulsion systems, the existing EV AC propulsion drives were compared, and a survey of experts` opinions was conducted. Comparison of the three AC drives was made on a relative and a quantitative basis using the survey questionnaires. According to the majority of the experts, induction motor drives are best suited for EV propulsion purpose, due to their low cost, high reliability, high speed, established converter and manufacturing technology, low torque ripple/noise and absence of position sensors. BDCM drives feature compactness, low weight and high efficiency and therefore provide an alternative for EV propulsion. The experts regard insulated gate bipolar transistors (IGBTs) as the most suited power semiconductor devices for AC drive converters at the present stage. 7 refs.

Chang, L. [New Brunswick Univ., Fredericton, New Brunswick (Canada). Dept. of Electrical Engineering] [New Brunswick Univ., Fredericton, New Brunswick (Canada). Dept. of Electrical Engineering

1994-08-01T23:59:59.000Z

282

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnership Plan Partnership Plan March 2013 U.S. DRIVE Partnership Plan Table of Contents Foreword ....................................................................................................................................................... 2 Definition ...................................................................................................................................................... 3 Partners ......................................................................................................................................................... 3 U.S. DRIVE Vision ........................................................................................................................................... 3 U.S. DRIVE Mission ........................................................................................................................................ 4

283

Development of an ``intelligent grinding wheel`` for in-process monitoring of ceramic grinding. Semi-annual report {number_sign}4  

SciTech Connect (OSTI)

The overall objective of this project is to develop sensor-integrated ``intelligent`` diamond wheels for grinding of ceramics. Such wheels will be ``smart`` enough to monitor and supervise both the wheel preparation and grinding processes without the need to instrument the machine tool. Intelligent wheels will utilize re-useable cores integrated with sensors: to measure the acoustic emission (AE) and grinding force. Signals from the sensors will be transmitted from a rotating wheel to a receiver by telemetry. Wheels will be ``trained`` to recognize distinct characteristics associated with truing, dressing and grinding. This overall project is divided into six tasks as follows: (1) development of miniaturized sensors and data transmission system; (2) wheel design and sensor configuration; (3) calibration of the sensor integrated wheel; (4) training of the intelligent wheel; (5) grinding tests; and (6) prototype demonstration. The technical progress is summarized in this report according to the tasks. All activity during this period has been concerned with the first two interrelated tasks, which need to be completed before undertaking the remaining tasks.

Malkin, S.; Gao, R.; Guo, C.; Varghese, B.; Pathare, S.

1998-09-30T23:59:59.000Z

284

Paper Number Sizing and Optimal Operation of a Power Split Hydraulic  

E-Print Network [OSTI]

operation becomes more complex. Drive train sizing and system operation in a power-split hybrid vehiclePaper Number Sizing and Optimal Operation of a Power Split Hydraulic Hybrid Drive Train Felicitas operation of a power-split drive train. A method for sizing components, and a modal operation in which

Li, Perry Y.

285

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS--I: FUNDAMENTAL THEORY AND APPLICATIONS, VOL. 49, NO. 5, MAY 2002 621 Modeling of PWM Inverter-Supplied AC Drives  

E-Print Network [OSTI]

. The fundamental frequency of this waveform is adjusted to produce the desired speed. In modern electric drives, MAY 2002 621 Modeling of PWM Inverter-Supplied AC Drives at Low Switching Frequencies T. A. Sakharuk in ac drives supplied by pulsewidth modulated (PWM) power electronic inverters. Specifically, the paper

Stankoviæ, Aleksandar

286

Optimization of condensing gas drive  

E-Print Network [OSTI]

- cal, undersaturated reservoir with gas being injected into the crest and oil being produced from the base of the structure. Fractional oil re- covery at gas breakthrough proved to be less sensitive to changes in oil withdrawal rates as the gas... injection pressure was increased. The validity of the model was established by accurately simulating several low pressure gas drives conducted in the laboratory. Oil recoveries at gas breakthrough using the model compared closely with those recoveries...

Lofton, Larry Keith

2012-06-07T23:59:59.000Z

287

Current drive operation in a tokamak  

Science Journals Connector (OSTI)

Three modes of current drive operation in a tokamak continuous, cyclic, and rfinitiated-are ... A model design of a saturable iron core tokamak for current drive experiments is also presented.

O. Mitarai; A. Hirose

1985-12-01T23:59:59.000Z

288

What Drives the BrewerDobson Circulation?  

Science Journals Connector (OSTI)

Recent studies have revealed strong interactions between resolved Rossby wave and parameterized gravity wave driving in stratosphere-resolving atmospheric models. Perturbations to the parameterized wave driving are often compensated by opposite ...

Naftali Y. Cohen; Edwin P. Gerber; Oliver Bhler

2014-10-01T23:59:59.000Z

289

Vehicle Technologies Office: U.S. DRIVE  

Broader source: Energy.gov [DOE]

U.S. DRIVE stands for Driving Research and Innovation for Vehicle efficiency and Energy sustainability. It is a non-binding and voluntary government-industry partnership focused on advanced...

290

October Blood Drive Announcement | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American Red Cross Blood Drive Scheduled for Oct. 31 The American Red Cross Blood Drive will take place Friday, October 31st from 10 a.m.-4 p.m. in CEBAF Center, Room F113. New and...

291

Main drive selection for the Windstorm Simulation Center  

SciTech Connect (OSTI)

Operated by the Partnership for Natural Disaster Reduction, the Windstorm Simulation Center (WSC) will be a structural test center dedicated to studying the performance of civil structural systems subjected to hurricanes, tornadoes, and other storm winds. Within the WSC, a bank of high-power fans, the main drive, will produce the high velocity wind necessary to reproduce these storms. Several options are available for the main drive, each with advantages and liabilities. This report documents a study to identify and evaluate all candidates available, and to select the most promising system such that the best possible combination of real-world performance attributes is achieved at the best value. Four broad classes of candidate were identified: electric motors, turbofan aircraft engines, turboshaft aircraft engines, and turboshaft industrial engines. Candidate systems were evaluated on a basis of technical feasibility, availability, power, installed cost, and operating cost.

Lacy, J.M.; Earl, J.S.

1998-02-01T23:59:59.000Z

292

Consider Steam Turbine Drives for Rotating Equipment  

Broader source: Energy.gov [DOE]

This tip sheet outlines the benefits of steam turbine drives for rotating equipment as part of optimized steam systems.

293

Indianapolis Offers a Lesson on Driving Demand  

Broader source: Energy.gov [DOE]

Successful program managers know that understanding the factors that drive homeowners to make upgrades is critical to the widespread adoption of energy efficiency. What better place to learn about driving demand for upgrades than in Indianapolis, America's most famous driving city?

294

Base drive and overlap protection circuit  

DOE Patents [OSTI]

An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Gritter, David J. (Southfield, MI)

1983-01-01T23:59:59.000Z

295

DOE Hydrogen and Fuel Cells Program Record 5012a: Well-to-Wheels Analyses for Solar and Wind Hydrogen Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

DOE Hydrogen and Fuel Cells Program Record DOE Hydrogen and Fuel Cells Program Record Record #: 5012a Date: December 21, 2005 Title: Well-to-Wheels Analyses for Solar & Wind Hydrogen Production Originator: Roxanne Garland Approved by: JoAnn Milliken Date: January 6, 2006 Item: This record explains the basis for the differences between the analyses of well-to-wheels energy use and greenhouse gas emissions conducted via Argonne National Laboratory's GREET Model, cited in the U.S. Department of Energy's Solar and Wind Technologies for Hydrogen Production Report to Congress, 1 and those conducted by the National Research Council, cited in the report The Hydrogen Economy: Opportunities, Costs, Barriers, and R&D Needs. 2 Well-to-Wheels Energy Use and Greenhouse Gas Emissions - Argonne National

296

Analysis and design of energy recovery snubbers for switched reluctance motor drives  

SciTech Connect (OSTI)

Snubber studies for switched reluctance motor (SRM) drives are nonexistent even though the power converter topologies are unique and do not fall under the category of inverter topologies applicable to AC motor drives. The importance of the snubbers does not come into the picture until either the power rating of the converter is high and in the multi-kW range or the switching frequency requirement is in the 20 kHz range. Such requirements are coming to the fore in many product development applications such as extruders, general purpose drives, integral starter generators for aircraft, electric vehicles, high speed spindles and centrifuges, etc. This paper is concerned with extending the Undeland snubber configuration to the two-switches per phase power converter topology of the SRM drive including the energy recovery feature. The energy recovery snubbers are then analyzed in terms of the various modes of operation encountered in the converter. A design procedure for the energy recovery snubbers is developed. The design procedure and the operation of the proposed snubber configuration in the SRM drive are experimentally verified with a laboratory prototype SRM drive. The impact of the proposed snubber on the power converter efficiency and its comparison with conventional snubber based systems, such as RCDs, is evaluated to assess the advantages of the proposed energy recovery snubber. 10 refs.

Gharpure, V.S.; Krishnan, R.; Lee, S. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Bradley Dept. of Electrical Engineering

1994-12-31T23:59:59.000Z

297

IEEE Int'l Conf. on Robotics and Automation (ICRA), May 14-18, 2012 Planning in High-dimensional Shape Space for a Single-wheeled  

E-Print Network [OSTI]

on a single ball. Achieving desired motions in position space is a challenging task for such systems due mobile robot that moves on a single ball. The single, spherical wheel enables the robot to achieve omni-dimensional Shape Space for a Single-wheeled Balancing Mobile Robot with Arms Umashankar Nagarajan, Byungjun Kim

298

Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems- A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions  

Broader source: Energy.gov [DOE]

A complete vehicle fuel-cycle analysis, commonly called a well-to-wheels (WTW) analysis that examines the use and emissions associated with fuel production (or well-to-tank [WTT]) activities and energy use and emissions associated with vehicle operation (or tank-to-wheels [TTW]) activities.

299

Real-Time Fuzzy Control of Sensorless PM Drive Systems Dr. Kasim M. Al-Aubidy  

E-Print Network [OSTI]

oscillator controls the motor speed. The other mode is the closed-loop mode, in which the inverter power is essential for controlling the power devices of the inverter. The main problem with present rotor position without the new trends in softcomputing. There is a lot of literature on the design of AC drive systems

300

Wind power generating system  

SciTech Connect (OSTI)

Normally feathered propeller blades of a wind power generating system unfeather in response to the actuation of a power cylinder that responds to actuating signals. Once operational, the propellers generate power over a large range of wind velocities. A maximum power generation design point signals a feather response of the propellers so that once the design point is reached no increase in power results, but the system still generates power. At wind speeds below this maximum point, propeller speed and power output optimize to preset values. The propellers drive a positive displacement pump that in turn drives a positive displacement motor of the swash plate type. The displacement of the motor varies depending on the load on the system, with increasing displacement resulting in increasing propeller speeds, and the converse. In the event of dangerous but not clandestine problems developing in the system, a control circuit dumps hydraulic pressure from the unfeathering cylinder resulting in a predetermined, lower operating pressure produced by the pump. In the event that a problem of potentially cladestine consequence arises, the propeller unfeathering cylinder immediately unloads. Upon startup, a bypass around the motor is blocked, applying a pressure across the motor. The motor drives the generator until the generator reaches a predetermined speed whereupon the generator is placed in circuit with a utility grid and permitted to motor up to synchronous speed.

Schachle, Ch.; Schachle, E. C.; Schachle, J. R.; Schachle, P. J.

1985-03-12T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Energy Department Invests to Drive Down Costs of Carbon Capture, Support  

Broader source: Energy.gov (indexed) [DOE]

Invests to Drive Down Costs of Carbon Capture, Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution November 7, 2013 - 10:30am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of the Obama Administration's Climate Action Plan, today the Energy Department announced the selection of 18 projects across the country to research innovative, second-generation technologies that will help improve the efficiency and drive down costs of carbon capture processes for new and existing coal-fired power plants. "In the past four years we've more than doubled renewable energy generation from wind and solar power. However, coal and other fossil fuels

302

Energy Department Invests to Drive Down Costs of Carbon Capture, Support  

Broader source: Energy.gov (indexed) [DOE]

Energy Department Invests to Drive Down Costs of Carbon Capture, Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution November 7, 2013 - 10:30am Addthis NEWS MEDIA CONTACT (202) 586-4940 WASHINGTON - As part of the Obama Administration's Climate Action Plan, today the Energy Department announced the selection of 18 projects across the country to research innovative, second-generation technologies that will help improve the efficiency and drive down costs of carbon capture processes for new and existing coal-fired power plants. "In the past four years we've more than doubled renewable energy generation from wind and solar power. However, coal and other fossil fuels

303

Enthusiasm for UK wave power survives high costs  

Science Journals Connector (OSTI)

... drive a turbine. But other proposals include on site conversion to hydrogen, on site desalination or direct use of the mechanical power to make heat.

Joe Schwartz

1978-11-30T23:59:59.000Z

304

Nova power systems: status and operating experience  

SciTech Connect (OSTI)

This paper describes the pulse power systems that are used in these lasers; the status and the operating experiences. The pulsed power system for the Nova Laser is comprised of several distinct technology areas. The large capacitor banks for driving flashlamps that excite the laser glass is one area, the fast pulsers that drive pockels cell shutters is another area, and the contol system for the pulsed power is a third. This paper discusses the capacitor banks and control systems.

Whitham, K.; Merritt, B.T.; Gritton, D.G.; Smart, A.J.; Holloway, R.W.; Oicles, J.A.

1983-11-28T23:59:59.000Z

305

Factors driving wind power development in the United States  

E-Print Network [OSTI]

presented at AWEA Windpower 2001 Conference, Washington,IN THE UNITED STATES WINDPOWER 2003 CONFERENCE WEDNESDAY,a portion to supply its Windpower green pricing program. The

Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

2003-01-01T23:59:59.000Z

306

EV Everywhere Grand Challenge - Electric Drive (Power Electronics...  

Broader source: Energy.gov (indexed) [DOE]

to enable U.S. companies to be the first in the world to produce plug-in electric vehicles (PEVs) that are as affordable and convenient for the average American family as...

307

Mining users' significant driving routes with low-power sensors  

Science Journals Connector (OSTI)

While there is significant work on sensing and recognition of significant places for users, little attention has been given to users' significant routes. Recognizing these routine journeys, can open doors for the development of novel applications, ... Keywords: dynamic time warping, mobile sensing, route sensing, significant journeys

Sarfraz Nawaz, Cecilia Mascolo

2014-11-01T23:59:59.000Z

308

Factors driving wind power development in the United States  

E-Print Network [OSTI]

news release, PUC Approves Xcel Resource Plan with AdditionPublic Utility Commissions Xcel Wind Decision. Papera settlement requiring Xcel Energy to develop or purchase

Bird, Lori A.; Parsons, Brian; Gagliano, Troy; Brown, Matthew H.; Wiser, Ryan H.; Bolinger, Mark

2003-01-01T23:59:59.000Z

309

Drive mechanism for stirling engine displacer and piston and other reciprocating bodies  

SciTech Connect (OSTI)

A drive mechanism is disclosed for drivingly connecting two reciprocating bodies to a rotating body and is particularly useful for linking a single pin crank of a crank-type stirling engine to its displacer and power piston. The drive means has at least two slotted yokes, each connected to a different one of the reciprocating bodies such as the pistons of the stirling engine. The pin of the crank extends through the slots of both slotted yokes. The slots are transverse to each other and preferably are linear.

Senft, J.R.

1982-07-20T23:59:59.000Z

310

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal Desai, Brenden Keyes,  

E-Print Network [OSTI]

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal was built on top of the system we have been developing for urban search and rescue (USAR) research. The system includes new behaviors and behavior sequencing, vision algorithms and sensor processing algorithms

Yanco, Holly A.

311

FxLMS method for suppressing in-wheel switched reluctance motor vertical force based on vehicle active suspension system  

Science Journals Connector (OSTI)

The vibration of SRM obtains less attention for in-wheel motor applications according to the present research works. In this paper, the vertical component of SRM unbalanced radial force, which is named as SRM vertical force, is taken into account in ...

Yan-yang Wang, Yi-nong Li, Wei Sun, Chao Yang, Guang-hui Xu

2014-01-01T23:59:59.000Z

312

February 7, 2009 "Friends come first, mathematics after." Raoul once said, as he smiled and wheeled his bicycle out  

E-Print Network [OSTI]

and wheeled his bicycle out of his office, and down the corridor to meet a visiting friend of his in a local coffee shop, his worn golden-brown portfolio balanced on his bicycle seat. Raoul Bott was a wonderful: as he smiled, made his way down a corridor, looked for his lost gloves, walked his bicycle

Mazur, Barry

313

Ferrite permanent magnet electrical machine and the application thereof within vehicle traction drives  

SciTech Connect (OSTI)

This patent describes, in combination, a land vehicle having axially aligned ground engaging tractive wheels, and a drivetrain carried by the vehicle for the propulsion thereof. The drivetrain comprises: (a) a substantially fixed DC power source including at least one chemical battery, (b) transmission means including selectable multiple gear ratios, an input shaft and a mechanical differential operative to transfer torque to the wheels, (c) a single-phase self-synchronous permanent magnet motor including, (i) an elongated central shaft, (ii) a generally u-shaped frame assembly adapted for mechanical grounding the shaft to a relatively stationary portion of the vehicle, the shaft being secured to the frame proximate each end thereof, (iii) a stator assembly secured to the shaft and characterized by a plurality of outwardly directed integrally formed salient poles and associated bifilar-wound induction coils, and (iv) a rotor assembly rotatably disposed on the shaft and substantially enclosing the stator assembly, the rotor assembly comprising a cylindrical shell defining an inner surface.

Gritter, D.J.; O'Neil, W.K.; Turner, D.

1987-03-17T23:59:59.000Z

314

Vehicle Technologies Office: U.S. DRIVE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

U.S. DRIVE U.S. DRIVE Logo for U.S. DRIVE - Driving Research and Innovation for Vehicle efficiency and Energy sustainability. U.S. DRIVE stands for Driving Research and Innovation for Vehicle efficiency and Energy sustainability. It is a non-binding and voluntary government-industry partnership focused on advanced automotive and related infrastructure technology research and development (R&D). Specifically, the Partnership is a forum for pre-competitive technical information exchange among partners to discuss R&D needs, develop joint goals and technology roadmaps, and evaluate R&D progress for a broad range of technical areas. By providing a framework for frequent and regular interaction among technical experts in a common area of expertise, the Partnership -

315

System studies of rf current drive for MST  

SciTech Connect (OSTI)

Two rf schemes are being studied on the MST reversed field pinch for their potential in current profile control experiments. MHD modeling has shown that a substantial externally-driven off axis parallel current can improve stability of the dominant core tearing modes. A radially localized axisymmetric population of fast electrons has been observed by SXR emission during LH injection (100kW at 800MHz), and is consistent with CQL3D modeling which predicts a small driven current. Computational work suggests that doubling the input power will statistically improve the LH-induced SXR signal to background ratio, and that about 2MW of injected power (an order of magnitude increase) will drive enough current for stabilization of tearing modes. Additionally, a 1 MW 5.5 GHz electron Bernstein wave (EBW) experiment is under construction, which utilizes a very simple and compact antenna compatible with the demands of the RFP. EBW allows access to electron cyclotron heating and current drive in the overdense plasma. Coupling of the external electromagnetic wave to the EBW has been demonstrated, and initial tests at {approx}100kW power have produced a small, localized xray flux consistent with rf heating and high diffusivity of fast electrons. Computational work is currently underway to answer the very important questions of how much power is required, and what level of electron diffusivity is tolerable, to generate a consequential amount of EBW current.

Anderson, J. K.; Burke, D. R.; Forest, C. B.; Goetz, J. A.; Hendries, E. R.; Seltzman, A. H.; Thomas, M. A. [Department of Physics, University of Wisconsin, Madison, WI (United States); Diem, S. [Oak Ridge National Laboratory, Oak Ridge TN (United States); Harvey, R. W. [CompX, Del Mar, CA (United States); Kaufman, M. C. [Department of Physics, University of Wisconsin, Madison, WI (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States)

2011-12-23T23:59:59.000Z

316

DOE Drives Big Data Push  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2 Volume 9 Issue 2 2 Volume 9 Issue 2 From YAGS to Planetary Biology . . . . . . . . . . . . . . . 2 DOE Drives Big Data Push . . . . . . . . . . . . . . . . . . . . 3 Sweating Small Scale Genomics . . . . . . . . . . . . . . . 6 The Future of the DOE JGI . . . . . . . . . . . . . . . . . . . . 7 Save the Date for Meeting 8 . . . . . . . . . . . . . . . . . . . 8 also in this issue With a record 488 genomics researchers and bioinformaticians sitting in the Marriott Walnut Creek ballroom, New York Times science writer Carl Zimmer opened the DOE Joint Genome Institute's 7th Annual Genomics of Energy & Environment Meeting on March 20, 2012. Sharing his thoughts about being "On the Genome Beat," he informed the audience that he was worn down by seeing news about scientists successfully sequencing yet another genome sequence, and that "maybe some genomes shouldn't be written about." Zimmer's words engaged the audience in a discussion that

317

Current Drive in Recombining Plasma  

SciTech Connect (OSTI)

The Langevin equations describing the average collisional dynamics of suprathermal particles in nonstationary plasma remarkably admit an exact analytical solution in the case of recombining plasma. The current density produced by arbitrary particle fluxes is derived including the effect of charge recombination. Since recombination has the effect of lowering the charge density of the plasma, thus reducing the charged particle collisional frequencies, the evolution of the current density can be modified substantially compared to plasma with fixed charge density. The current drive efficiency is derived and optimized for discrete and continuous pulses of current, leading to the discovery of a nonzero "residual" current density that persists indefinitely under certain conditions, a feature not present in stationary plasmas.

P.F. Schmit and N.J. Fisch

2012-05-15T23:59:59.000Z

318

Traction Drive System for Electric Vehicles, Using Multilevel Converters Juan W. Dixon, Micah Ortzar and Felipe Ros  

E-Print Network [OSTI]

Traction Drive System for Electric Vehicles, Using Multilevel Converters Juan W. Dixon, Micah converters for electric vehicles using multilevel inverters. They are being compared with inverters using. Introduction Power Electronics technologies contribute with important part in the development of electric

Catholic University of Chile (Universidad Católica de Chile)

319

Improving Motor and Drive System Performance  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

drives. Energy-Efficient Electric Motors and Their Applications, 2nd Edition Author: Jordan, H.E. Publisher: Springer Description: Evaluates the energy savings potential of...

320

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

D.C. tiarravt034ferdowsi2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Meeting arravt034tiferdowsi2012o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

322

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Evaluation arravt034tiferdowsi2011p.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program Advanced...

323

Advanced Electric Drive Vehicle Education Program  

Broader source: Energy.gov (indexed) [DOE]

Training Consortium (NAFTC), together with its partners, will develop an Advanced Electric Drive Vehicle Education Program that will help accelerate mass market introduction...

324

Electric Drive Vehicle Infrastructure Deployment | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Infrastructure Deployment Electric Drive Vehicle Infrastructure Deployment 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer...

325

Cone Drive Operations Inc | Open Energy Information  

Open Energy Info (EERE)

Cone Drive Operations Inc Place: Traverse City, Michigan Zip: 49684 Sector: Solar Product: US-based manufacturers of double enveloping worm gear technology. The company supplies...

326

Marketing & Driving Demand: Social Media Tools & Strategies ...  

Broader source: Energy.gov (indexed) [DOE]

Demand: Social Media Tools & Strategies - January 16, 2011 Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 January 16, 2011 Conference Call...

327

Marketing & Driving Demand Collaborative - Social Media Tools...  

Broader source: Energy.gov (indexed) [DOE]

Demand Collaborative - Social Media Tools & Strategies Marketing & Driving Demand Collaborative - Social Media Tools & Strategies Presentation slides from the BetterBuildings...

328

Collaboration drives achievement in protein structure research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AlumniLink November 2014 Collaboration drives achievement in protein structure research Alumni Link: Opportunities, News and Resources for Former Employees Latest...

329

Design and control of multimodal single-legged vehicles with variable geometry reaction wheel arrays  

E-Print Network [OSTI]

of the Mitsubishi PA-10 robot arm harmonic drive system,leg and arms stems directly from the design of the robot;Arm Suspension Mechanism for an Underactuated Single Legged Hopping Robot.

Schmidt-Wetekam, Christopher

2011-01-01T23:59:59.000Z

330

Performance Study of ScepterTM Metal Bond Diamond Grinding Wheel  

SciTech Connect (OSTI)

Advanced ceramics are attractive for many applications in the transportation, energy, military, and industrial markets because they possess properties of high-temperature durability, corrosion resistance, strength, hardness, stiffness, and wear resistance. Unfortunately, these same properties make advanced ceramics more difficult to machine than traditional materials. The reliability and manufacturing costs of advanced ceramic components are significant concerns that must be overcome. Nevertheless, the use of advanced ceramic materials is expected to increase dramatically in new transportation systems in response to more stringent energy conservation and pollution reduction requirements. This study discusses the goals, commercialization plans, phased development, scale-up, testing, and external verification of performance of the innovative grinding wheel that evolved from the project.

Denison, S.K.; Licht, R.W.; McSpadden, S.B., Jr.; Parten, R.J.; Picone, J.W.; Shelton, J.E.

1999-06-17T23:59:59.000Z

331

Parameter analysis and design framework for magnetic adhesion wall climbing wheeled robot  

Science Journals Connector (OSTI)

Some robots need to climb ferromagnetic walls for performing important inspections and evaluations of the material properties of these walls. This paper aims to establish a design framework for magnetically adhering wheeled robots having magnets attached to the base of the robot. The different design parameters influencing the magnetic adhesion include the geometry of the flux concentrator, the variation of the air gap on adhesion and climbing performance in addition to various types of materials for magnetic flux concentration. These parameters shaping adhesion behaviour are simulated numerically using magnetostatic analysis in ANSYS Finite Elements Method (FEM) software. The results are evaluated and a set of rules and procedures are created as a framework that will enable a more efficient design and construction of this type of robots.

Salman Hussain; Tariq Sattar; Ener Salinas

2012-01-01T23:59:59.000Z

332

MISS-1-N Wholesale Power Rate Schedule | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

MISS-1-N Wholesale Power Rate Schedule MISS-1-N Wholesale Power Rate Schedule MISS-1-N Wholesale Power Rate Schedule Area: South Mississippi Electric Power Association System: Georgia-Alabama-South Carolina This rate schedule shall be available to the South Mississippi Electric Power Association (hereinafter called the Customer) to whom power may be wheeled pursuant to contracts between the Government and PowerSouth Energy Cooperative (hereinafter called PowerSouth). This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. This rate schedule does

333

The investigation of exhaust powered, automotive air cycle air conditioning  

E-Print Network [OSTI]

Pressure Ratio Net Power Test Apparatus Available Turbocompressors Turbine and Compressor Wheels Mounted to Shaft Turbocompressor Mounted. to Exhaust Line Total System Test Rig Full Throttle Performance Curves Subscript 'c' Corrected Results 13 13... an automotive air cycle unit which employed a rotary- vaned compressor. The prototype unit developed. cooling over various engine speeds because of the compressor being a positive displacement type which developed fairly high pressures on the order of 40 psia...

Holley, James Andrew

1978-01-01T23:59:59.000Z

334

Improvements in EMC performance of inverter-fed motor drives  

SciTech Connect (OSTI)

An experimental investigation of conducted radio-noise emission from a conventional pulse width modulated (PWM) inverter of medium power feeding an induction motor is described. It is determined that the inverter system generates considerable impulse currents through the power leads feeding the system resulting in serious conducted electromagnetic interference (EMI) problems and significant voltage waveform distortion in the power system. The dominant emission sources in the system are identified. A proposed model of the drive system for the purpose of evaluation of EMI are developed. Several low-cost strategies for improvement in EMC performance of the PWM inverter are then proposed. Experimental results demonstrate that disturbance from the modified system can be dramatically reduced and that the EMC performance of the system has come very close to meeting the IEC CISPR and FCC limits on conducted emissions for digital devices.

Zhong, E.; Lipo, T.A. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

335

Biofuels development in Maine: Using trees to oil the wheels of sustainability -Maine news, sports, obituaries, weather -Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustain  

E-Print Network [OSTI]

Biofuels development in Maine: Using trees to oil the wheels of sustainability - Maine news, sports, obituaries, weather - Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustainability/print/[3/13/2013 1:54:43 PM] Biofuels development

Thomas, Andrew

336

METHODS OF RADIO-FREQUENCY CURRENT DRIVE  

E-Print Network [OSTI]

METHODS OF RADIO-FREQUENCY CURRENT DRIVE N. J. FISCH* Princeton Plasma Physics Laboratory-670 Radio-frequency waves can penetrate thermonuclear plasmas, depositing momentum and energy with great. INTRODUCTION Using radio-frequency (rf) waves to drive the toroidal current in tokamak reactors is attractive

337

Driving Innovation A Satellite Applications TIC  

E-Print Network [OSTI]

Driving Innovation A Satellite Applications TIC 8 December 2011 Michael Lawrence Head of Special Projects #12;Driving Innovation SatApps TIC - goal `generating growth across the economy through new satellite enabled business' · Note : overall TIC strategy goal ­ accelerating the commercialisation

338

Courtyard Hanover Lebanon 10 Morgan Drive  

E-Print Network [OSTI]

· Boston Logan International Airport (BOS) Airport Phone:1-800-235-6426 Hotel direction: 111 mile for persons with disabilities· #12;Driving Directions from Airport Lebanon Municipal Airport (LEB) Airport Phone:1-603-298-8878 Hotel direction: 4 mile(s) S Driving directions:From Lebanon Airport to the hotel

Myers, Lawrence C.

339

Electric top drives gain wide industry acceptance  

SciTech Connect (OSTI)

Since its introduction, the top drive drilling system has gained acceptance as a productive and safe method for drilling oil and gas wells. Originally, the system was used mostly for offshore and higher cost land drilling, and it had to be installed as a permanent installation because of its enormous weight and size. Essentially, a top drive replaces the kelly and rotary table as the means of rotating drillpipe on oil, gas and geothermal rigs and is considered to be 15% to 40% more efficient than a kelly drive. Top drive systems allow the operator to drill and maintain directional orientation for triple stands and provide tripping efficiency because of the ability to ream and circulate with triple stands, to reduce the risk of stuck pipe or lost wells, and to improve well control and pipe handling safety. The paper describes electric top drives with DC motors, top drives with AC motors, top drives with permanent magnet motors, and top drives with permanent magnet brushless synchronous motors.

Riahi, M.L.

1998-05-01T23:59:59.000Z

340

Combined cycle power plant incorporating coal gasification  

DOE Patents [OSTI]

A combined cycle power plant incorporating a coal gasifier as the energy source. The gases leaving the coal gasifier pass through a liquid couplant heat exchanger before being used to drive a gas turbine. The exhaust gases of the gas turbine are used to generate both high pressure and low pressure steam for driving a steam turbine, before being exhausted to the atmosphere.

Liljedahl, Gregory N. (Tariffville, CT); Moffat, Bruce K. (Simsbury, CT)

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Gas Mileage Tips - Driving More Efficiently  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Driving More Efficiently Driving More Efficiently Personalize Fuel Prices Select the fuel type and enter your fuel price to personalize savings estimates. Regular Midgrade Premium Diesel E85 CNG LPG $ 3.33 /gal Save My Prices Use Default Prices Click "Save My Prices" to apply your prices to other pages, or click "Use Default Prices" use national average prices. Drive Sensibly frustrated driver Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33% at highway speeds and by 5% around town. Sensible driving is also safer for you and others, so you may save more than gas money. Fuel Economy Benefit: 5%-33% Equivalent Gasoline Savings: $0.17-$1.10/gallon Observe the Speed Limit (New Information) Graph showing MPG decreases rapidly at speeds above 50 mph

342

Electrifying Your Drive | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

343

Electrifying Your Drive | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Electrifying Your Drive Electrifying Your Drive Electrifying Your Drive April 27, 2010 - 7:30am Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For anyone who grew up watching The Jetsons (or Back to the Future, depending on your generation), the "Car of the Future!" flew through the skies with the greatest of ease. Although most of us have given up on our hopes of a flying car, anything beyond the internal combustion engine has seemed hopelessly out of reach until recently. However, with several manufacturers planning on producing plug-in and all-electric vehicles, the Car of the Future will be available soon! But before you put down a deposit, it's helpful to understand the different types of electric drive technologies. The most basic form of electric drive

344

Drilling of wells with top drive unit  

SciTech Connect (OSTI)

Well drilling apparatus including a top drive drilling assembly having a motor driven stem adapted to be attached to the upper end of a drill string and drive it during a drilling operation, a torque wrench carried by the top drive assembly and movable upwardly and downwardly therewith and operable to break a threated connection between the drill string and the stem, and an elevator carried by and suspended from the top drive assembly and adapted to engage a section of drill pipe beneath the torque wrench in suspending relation. The torque wrench and elevator are preferably retained against rotation with the rotary element which drives the drill string, but may be movable vertically relative to that rotary element and relative to one another in a manner actuating the apparatus between various different operating conditions.

Boyadjieff, G.I.

1984-05-22T23:59:59.000Z

345

Modular PM Motor Drives for Automotive Traction Applications  

SciTech Connect (OSTI)

This paper presents modular permanent magnet (PM) motor drives for automotive traction applications. A partially modularized drive system consisting of a single PM motor and multiple inverters is described. The motor has multiple three-phase stator winding sets and each winding set is driven with a separate three-phase inverter module. A truly modularized inverter and motor configuration based on an axial-gap PM motor is then introduced, in which identical PM motor modules are mounted on a common shaft and each motor module is powered by a separate inverter module. The advantages of the modular approach for both inverter and motor include: (1) power rating scalability--one design meets different power requirements by simply stacking an adequate number of modules, thus avoiding redesigning and reducing the development cost, (2) increased fault tolerance, and (3) easy repairing. A prototype was constructed by using two inverters and an axial-gap PM motor with two sets of three-phase stat or windings, and it is used to assist the diesel engine in a hybrid electric vehicle converted from a Chevrolet Suburban. The effect of different pulse-width-modulation strategies for both motoring and regenerative modes on current control is analyzed. Torque and regenerative control algorithms are implemented with a digital signal processor. Analytical and initial testing results are included in the paper.

Su, G.J.

2001-10-29T23:59:59.000Z

346

Power Conditioning and Control Applications for Energy Conservation  

E-Print Network [OSTI]

Electrical power conditioning and control (PCC) systems are finding cost effective applications in AC motor drives, lamp ballasts and power supplies. Substantial system efficiency improvements are being realized when the appropriate PCC system...

Brushwood, J. S.

1982-01-01T23:59:59.000Z

347

Islanded Grid Wind Power Conference | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Islanded Grid Wind Power Conference Islanded Grid Wind Power Conference March 4, 2015 8:00AM AKST to March 6, 2015 5:00PM AKST Alaska Pacific University 4101 University Drive...

348

U.S. DRIVE Highlights of Technical Accomplishments 2011  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 1 February 2012 Preface The U.S. DRIVE Partnership is a voluntary government-industry partnership focused on precompetitive, advanced automotive and related infrastructure technology research and development (R&D). Partners are the United States Department of Energy (DOE); the United States Council for Automotive Research LLC (USCAR), a consortium composed of Chrysler Group LLC, Ford Motor Company, and General Motors Company; Tesla Motors; five energy companies (BP America, Chevron Corporation, ConocoPhillips, ExxonMobil Corporation, and Shell Oil Products US); two electric utilities, DTE Energy and Southern California Edison; and the Electric Power Research Institute.

349

Linear hydraulic drive system for a Stirling engine  

SciTech Connect (OSTI)

A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible.

Walsh, Michael M. (Schenectady, NY)

1984-02-21T23:59:59.000Z

350

Linear hydraulic drive system for a Stirling engine  

SciTech Connect (OSTI)

A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible. 2 figs.

Walsh, M.M.

1984-02-21T23:59:59.000Z

351

Replace V-Belts with Notched or Synchronous Belt Drives  

Broader source: Energy.gov [DOE]

Belt drives provide flexibility in the positioning of the motor relative to the load. Pulleys (sheaves) of varying diameters allow the speed of the driven equipment to be increased or decreased relative to the motor speed. A properly designed belt power-transmission system offers high efficiency and low noise, requires no lubrication, and presents low maintenance requirements. However, certain types of belts are more efficient than others, offering potential energy cost savings. This tip sheet provides example energy savings calculations and offers suggested actions.

352

Response Surface Energy Modeling of an Electric Vehicle over a Reduced Composite Drive Cycle  

SciTech Connect (OSTI)

Response surface methodology (RSM) techniques were applied to develop a predictive model of electric vehicle (EV) energy consumption over the Environmental Protection Agency's (EPA) standardized drive cycles. The model is based on measurements from a synthetic composite drive cycle. The synthetic drive cycle is a minimized statistical composite of the standardized urban (UDDS), highway (HWFET), and US06 cycles. The composite synthetic drive cycle is 20 minutes in length thereby reducing testing time of the three standard EPA cycles by over 55%. Vehicle speed and acceleration were used as model inputs for a third order least squared regression model predicting vehicle battery power output as a function of the drive cycle. The approach reduced three cycles and 46 minutes of drive time to a single test of 20 minutes. Application of response surface modeling to the synthetic drive cycle is shown to predict energy consumption of the three EPA cycles within 2.6% of the actual measured values. Additionally, the response model may be used to predict energy consumption of any cycle within the speed/acceleration envelope of the synthetic cycle. This technique results in reducing test time, which additionally provides a model that may be used to expand the analysis and understanding of the vehicle under consideration.

Jehlik, Forrest [Argonne National Laboratory (ANL)] [Argonne National Laboratory (ANL); LaClair, Tim J [ORNL] [ORNL

2014-01-01T23:59:59.000Z

353

Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Efficient Driving Efficient Driving Behaviors to Conserve Fuel to someone by E-mail Share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Facebook Tweet about Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Twitter Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Google Bookmark Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Delicious Rank Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on Digg Find More places to share Alternative Fuels Data Center: Efficient Driving Behaviors to Conserve Fuel on AddThis.com... More in this section... Idle Reduction Parts & Equipment Maintenance Driving Behavior Management Strategies

354

GPS Data Filtration Method for Drive Cycle Analysis Applications  

SciTech Connect (OSTI)

When employing GPS data acquisition systems to capture vehicle drive-cycle information, a number of errors often appear in the raw data samples, such as sudden signal loss, extraneous or outlying data points, speed drifting, and signal white noise, all of which limit the quality of field data for use in downstream applications. Unaddressed, these errors significantly impact the reliability of source data and limit the effectiveness of traditional drive-cycle analysis approaches and vehicle simulation software. Without reliable speed and time information, the validity of derived metrics for drive cycles, such as acceleration, power, and distance, become questionable. This study explores some of the common sources of error present in raw onboard GPS data and presents a detailed filtering process designed to correct for these issues. Test data from both light and medium/heavy duty applications are examined to illustrate the effectiveness of the proposed filtration process across the range of vehicle vocations. Graphical comparisons of raw and filtered cycles are presented, and statistical analyses are performed to determine the effects of the proposed filtration process on raw data. Finally, an evaluation of the overall benefits of data filtration on raw GPS data and present potential areas for continued research is presented.

Duran, A.; Earleywine, M.

2013-02-01T23:59:59.000Z

355

Would You Consider Driving a Vehicle that Can Run on Biodiesel? |  

Broader source: Energy.gov (indexed) [DOE]

Would You Consider Driving a Vehicle that Can Run on Biodiesel? Would You Consider Driving a Vehicle that Can Run on Biodiesel? Would You Consider Driving a Vehicle that Can Run on Biodiesel? September 16, 2010 - 7:30am Addthis On Monday, Shannon told you about biodiesel, a renewable fuel that can power a vehicle using less fuel and producing fewer greenhouse gas emissions. DOE has an Alternative Fuel Station Locator that can help drivers find the nearest fueling station to fill up their vehicles. Would you consider driving a vehicle that can run on biodiesel? Why or why not? Each Thursday, you have the chance to share your thoughts on a question about energy efficiency or renewable energy for consumers. Please comment with your answers, and also feel free to respond to other comments. E-mail your responses to the Energy Saver team at

356

AC Ward Leonard drive systems: Revisiting the four-quadrant operation of AC machines  

Science Journals Connector (OSTI)

Abstract In this paper, the problem of controlling the speed of AC machines in four quadrants is revisited from a completely new viewpoint, based on the idea of powering an AC machine with a synchronous generator that generates a variable-voltagevariable-frequency supply. This is a natural, mathematical, but not physical, extension of the conventional Ward Leonard drive systems for DC machines to AC machines. As a result, AC drives can be regarded as generator-motor systems, which facilitate the analysis of AC drives and the introduction of other special functions because a system consisting of a generator and a motor is easier to be handled than the conventional AC drive that consists of an inverter and a motor. Control strategies, with and without a speed sensor, are proposed to implement this idea and the experimental results are presented to demonstrate the feasibility.

Qing-Chang Zhong

2013-01-01T23:59:59.000Z

357

Installation considerations for IGBT AC drives  

SciTech Connect (OSTI)

In the last four years, Adjustable Speed ac Drive (ASD) manufacturers have migrated from Bipolar Junction Transistor (BJT) semiconductors to Insulated Gate Bipolar Transistors (IGBTs) as the preferred Output switching device. The advantage of IGBTs over BJTs is that device rise and fall time switching capability is 5 - 10 times faster, resulting in lower device switching loss and a more efficient drive. However, for a similar motor cable length as the BJT drive, the faster output voltage risetime of the IGBT drive may increase the dielectric voltage stress on the motor and cable due to a phenomenon called reflected wave. Faster output dv/dt transitions of IGBT drives also increase the possibility for phenomenon such as increased Common Mode (CM) electrical noise, Electromagnetic Interference (EMI) problems and increased capacitive cable charging current problems. Also, recent experience suggests any Pulse Width Modulated (PWM) drive with a steep fronted output voltage wave form may increase motor shaft voltage and lead to a bearing current phenomenon known as fluting. This paper provides a basic understanding of these issues, as well as solutions, to insure a successful drive system installation.

Skibinski, G.L.

1997-06-01T23:59:59.000Z

358

A high-fidelity harmonic drive model.  

SciTech Connect (OSTI)

In this paper, a new model of the harmonic drive transmission is presented. The purpose of this work is to better understand the transmission hysteresis behavior while constructing a new type of comprehensive harmonic drive model. The four dominant aspects of harmonic drive behavior - nonlinear viscous friction, nonlinear stiffness, hysteresis, and kinematic error - are all included in the model. The harmonic drive is taken to be a black box, and a dynamometer is used to observe the input/output relations of the transmission. This phenomenological approach does not require any specific knowledge of the internal kinematics. In a novel application, the Maxwell resistive-capacitor hysteresis model is applied to the harmonic drive. In this model, sets of linear stiffness elements in series with Coulomb friction elements are arranged in parallel to capture the hysteresis behavior of the transmission. The causal hysteresis model is combined with nonlinear viscous friction and spectral kinematic error models to accurately represent the harmonic drive behavior. Empirical measurements are presented to quantify all four aspects of the transmission behavior. These measurements motivate the formulation of the complete model. Simulation results are then compared to additional measurements of the harmonic drive performance.

Preissner, C.; Royston, T. J.; Shu, D. (APS Engineering Support Division); ( MCS); (Univ. of Illinois)

2012-01-01T23:59:59.000Z

359

Is Vietnam Ready for Nuclear Power?  

Science Journals Connector (OSTI)

Is Vietnam Ready for Nuclear Power? ... Currently the worlds largest nuclear power market exists in emerging economies and developing countries as those countries are in great need of relatively cheap energy to drive its economic growth. ... But nuclear power, neither cheap nor safe, is putting those countries in a dilemma. ...

Changjian Wang; Qiang Wang; Fei Wang

2012-04-27T23:59:59.000Z

360

Policy Issues for Retail Beamed Power Transmission  

E-Print Network [OSTI]

change, (b) the drive to improve air quality, and (c) the need for increased availability of energy solar electric power using retail delivery of beamed power. Recent advances in power beaming have made to enable widespread adoption of this clean and sustainable contribution to meeting energy needs. It is seen

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Amgad Elgowainy and Michael Wang Center for Transportation Research Argonne National Laboratory LDV Workshop July26, 2010 2 2 2 Team Members 2  ANL's Energy Systems (ES) Division  Michael Wang (team leader)  Dan Santini  Anant Vyas  Amgad Elgowainy  Jeongwoo Han  Aymeric Rousseau  ANL's Decision and Information Sciences (DIS) Division:  Guenter Conzelmann  Leslie Poch  Vladimir Koritarov  Matt Mahalik  Thomas Veselka  Audun Botterud  Jianhui Wang  Jason Wang 3 3 3 Scope of Argonne's PHEV WTW Analysis: Vehicle Powertrain Systems and Fuel Pathways 3  Vehicle powertrain systems:  Conventional international combustion engine vehicles (ICEVs)

362

Dielectric Wakefield Accelerator to drive the future FEL Light Source.  

SciTech Connect (OSTI)

X-ray free-electron lasers (FELs) are expensive instruments and a large part of the cost of the entire facility is driven by the accelerator. Using a high-energy gain dielectric wake-field accelerator (DWA) instead of the conventional accelerator may provide a significant cost saving and reduction of the facility size. In this article, we investigate using a collinear dielectric wakefield accelerator to provide a high repetition rate, high current, high energy beam to drive a future FEL x-ray light source. As an initial case study, a {approx}100 MV/m loaded gradient, 850 GHz quartz dielectric based 2-stage, wakefield accelerator is proposed to generate a main electron beam of 8 GeV, 50 pC/bunch, {approx}1.2 kA of peak current, 10 x 10 kHz (10 beamlines) in just 100 meters with the fill factor and beam loading considered. This scheme provides 10 parallel main beams with one 100 kHz drive beam. A drive-to-main beam efficiency {approx}38.5% can be achieved with an advanced transformer ratio enhancement technique. rf power dissipation in the structure is only 5 W/cm{sup 2} in the high repetition rate, high gradient operation mode, which is in the range of advanced water cooling capability. Details of study presented in the article include the overall layout, the transform ratio enhancement scheme used to increase the drive to main beam efficiency, main wakefield linac design, cooling of the structure, etc.

Jing, C.; Power, J.; Zholents, A. (Accelerator Systems Division (APS)); ( HEP); (LLC)

2011-04-20T23:59:59.000Z

363

Vision and Inertial Sensor Based Drive Trains Control  

E-Print Network [OSTI]

Inertial Sensor Based Drive Trains Control by Haifei Cheng AInertial Sensor Based Drive Trains Control c 2010 by HaifeiInertial Sensor Based Drive Trains Control by Haifei Cheng

Cheng, Haifei

2010-01-01T23:59:59.000Z

364

Driving Efficiencies Track | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Driving Efficiencies Track Tuesday April 17, 2012 From E-Mail to "The Stream" by Don Burke Taking Records Inventory Into the 21st Century by Lorie A. Robb Engineering and Operations Control: Embrace the Culture by Cheryl Bolen IT Project Management Framework by Denise Hill Wednesday April 18, 2012 Records Warehouse Operations and Records Storage for External Customers by Karen Hatch Preservation of Long-Term Temporary Records by Jeanie Gueretta Mobile Initiatives Effecting Change at Hanford by Don Stewart DOE's CIO's EWA by Sarah Gamage, Don Schade and Alan Andon Green IT 2012: Sustainable Electronics by Edwin Luevanos and Jeff Eagan Thursday April 19, 2012 Document Management and Control System by Melissa Ruth

365

Fuel Economy: What Drives Consumer Choice?  

E-Print Network [OSTI]

S. Kurani, Car Buyers and Fuel Economy? Energy Policy,Fuel Economy: What Drives Consumer Choice? BY TOMa car, do they think about fuel costs over time, are they

Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

2007-01-01T23:59:59.000Z

366

Image fusion for a nighttime driving display  

E-Print Network [OSTI]

An investigation into image fusion for a nighttime driving display application was performed. Most of the image fusion techniques being investigated in this application were developed for other purposes. When comparing the ...

Herrington, William Frederick

2005-01-01T23:59:59.000Z

367

Modeling driving decisions with latent plans  

E-Print Network [OSTI]

Driving is a complex task that includes a series of interdependent decisions. In many situations, these decisions are based on a specific plan. The plan is however unobserved or latent and only the manifestations of the ...

Choudhury, Charisma Farheen, 1978-

2007-01-01T23:59:59.000Z

368

Safe Tractor Operation: Driving on Highways  

E-Print Network [OSTI]

About 50 tractor drivers are killed each year in collisions with other vehicles on public roads. Many of these accidents could be prevented. This publication describes the legal requirements for operating a tractor on public roads, safe driving...

Smith, David

2004-09-16T23:59:59.000Z

369

Bagdad Plant Raymond J. Polinski 585 Silicon Drive General Manager  

Broader source: Energy.gov (indexed) [DOE]

Bagdad Plant Raymond J. Polinski Bagdad Plant Raymond J. Polinski 585 Silicon Drive General Manager Leechburg, PA 15656 Grain-Oriented Electrical Steel e-mail: Raymond.Polinski@ATImetals.com E. Below are Allegheny Technologies Incorporated's comments on certain issues in which the DOE sought comment. 17. DOE seeks comment on nanotechnology composites and their potential for use in distribution transformers. Soft magnetic and amorphous particles with excellent magnetic properties can be and are currently produced, but the insulating matrix required to eliminate short-circuit paths dissipate power at the operating frequencies for power distribution transformers (50/60 Hz). Such transformer cores are currently only used for high-frequency applications where significant

370

Heel and toe driving on fuel cell vehicle  

DOE Patents [OSTI]

A system and method for providing nearly instantaneous power in a fuel cell vehicle. The method includes monitoring the brake pedal angle and the accelerator pedal angle of the vehicle, and if the vehicle driver is pressing both the brake pedal and the accelerator pedal at the same time and the vehicle is in a drive gear, activating a heel and toe mode. When the heel and toe mode is activated, the speed of a cathode compressor is increased to a predetermined speed set-point, which is higher than the normal compressor speed for the pedal position. Thus, when the vehicle brake is removed, the compressor speed is high enough to provide enough air to the cathode, so that the stack can generate nearly immediate power.

Choi, Tayoung; Chen, Dongmei

2012-12-11T23:59:59.000Z

371

Spectral Effects on Fast Wave Core Heating and Current Drive  

SciTech Connect (OSTI)

Recent results obtained with high harmonic fast wave (HHFW) heating and current drive (CD) on NSTX strongly support the hypothesis that the onset of perpendicular fast wave propagation right at or very near the launcher is a primary cause for a reduction in core heating efficiency at long wavelengths that is also observed in ICRF heating experiments in numerous tokamaks. A dramatic increase in core heating efficiency was first achieved in NSTX L-mode helium majority plasmas when the onset for perpendicular wave propagation was moved away from the antenna and nearby vessel structures. Efficient core heating in deuterium majority L mode and H mode discharges, in which the edge density is typically higher than in comparable helium majority plasmas, was then accomplished by reducing the edge density in front of the launcher with lithium conditioning and avoiding operational points prone to instabilities. These results indicate that careful tailoring of the edge density profiles in ITER should be considered to limit rf power losses to the antenna and plasma facing materials. Finally, in plasmas with reduced rf power losses in the edge regions, the first direct measurements of high harmonic fast wave current drive were obtained with the motional Stark effect (MSE) diagnostic. The location and radial dependence of HHFW CD measured by MSE are in reasonable agreement with predictions from both full wave and ray tracing simulations.

C.K. Phillips, R.E. Bell, L.A. Berry, P.T. Bonoli, R.W. Harvey, J.C. Hosea, E.F. Jaeger, B.P. LeBlanc, P.M. Ryan, G. Taylor, E.J. Valeo, J.R. Wilson, J.C. Wright, H. Yuh, and the NSTX Team

2009-05-11T23:59:59.000Z

372

194 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 56, NO. 1, JANUARY 2009 PWM Method to Eliminate Power Sources in a  

E-Print Network [OSTI]

to Eliminate Power Sources in a Nonredundant 27-Level Inverter for Machine Drive Applications Mauricio Rotella-stage 27-level inverter using "H" converters is analyzed for medium- and high-power machine drive was implemented using DSP controllers, which give flexibility to the system. Index Terms--Drives, multilevel

Catholic University of Chile (Universidad Católica de Chile)

373

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Broader source: Energy.gov (indexed) [DOE]

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2013 DOE Hydrogen and Fuel Cells Program and...

374

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2012 DOE Hydrogen and Fuel Cells Program and...

375

Computer-Aided Engineering for Electric Drive Vehicle Batteries...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) 2011 DOE Hydrogen and Fuel Cells...

376

Impact of Driving Behavior on PHEV Fuel Consumption for Different...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Driving Behavior on PHEV Fuel Consumption for Different Powertrain, Component Sizes and Control Impact of Driving Behavior on PHEV Fuel Consumption for Different Powertrain,...

377

Improving Motor and Drive System Performance - A Sourcebook for...  

Broader source: Energy.gov (indexed) [DOE]

More Documents & Publications Is it Cost-Effective to Replace Old Eddy-Current Drives? Adjustable Speed Pumping Applications Consider Steam Turbine Drives for Rotating Equipment...

378

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere...

379

Center for Electric Drive Transportation at the University of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electric Drive Transportation at the University of Michigan - Dearborn Center for Electric Drive Transportation at the University of Michigan - Dearborn 2012 DOE Hydrogen and Fuel...

380

Electric Drive and Advanced Battery and Components Testbed (EDAB...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review and Peer Evaluation vss033carlson2011o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Electric Drive and Advanced...

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

How Exhaust Emissions Drive Diesel Engine Fuel Efficiency | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

How Exhaust Emissions Drive Diesel Engine Fuel Efficiency How Exhaust Emissions Drive Diesel Engine Fuel Efficiency 2004 Diesel Engine Emissions Reduction (DEER) Conference...

382

High-Temperature, Air-Cooled Traction Drive Inverter Packaging...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Temperature, Air-Cooled Traction Drive Inverter Packaging High-Temperature, Air-Cooled Traction Drive Inverter Packaging 2010 DOE Vehicle Technologies and Hydrogen Programs Annual...

383

California and Connecticut: National Fuel Cell Bus Programs Drive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

California and Connecticut: National Fuel Cell Bus Programs Drive Fuel Economy Higher California and Connecticut: National Fuel Cell Bus Programs Drive Fuel Economy Higher August...

384

EV Everywhere Grand Challenge Introduction for Electric Drive...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Introduction for Electric Drive Workshop EV Everywhere Grand Challenge Introduction for Electric Drive Workshop Presentation given by EERE Assistant Secretary David Danielson at...

385

Solutions for Interharmonics in Variable Speed Drives for LNG Plants:.  

E-Print Network [OSTI]

??Variable speed drives can cause components of any frequency known as interharmonics. Large variable speed drives in the order of tens of megawatts can replace (more)

Verhulst, M.P.A.

2011-01-01T23:59:59.000Z

386

INSTALLATION, COMMISSIONING AND TROUBLE SHOOTING OF VARIABLE FREQUENCY DRIVE.  

E-Print Network [OSTI]

??In this thesis, the installation of variable frequency drive on board a ship is introduced briefly. In this particular study the variable frequency drive was (more)

Kuituniemi, Santtu

2013-01-01T23:59:59.000Z

387

US DRIVE Vehicle Systems and Analysis Technical Team Roadmap...  

Energy Savers [EERE]

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan Vehicle Technologies Office: 2013 Vehicle and Systems Simulation...

388

Method and apparatus for improved efficiency in a pulse-width-modulated alternating current motor drive  

DOE Patents [OSTI]

A scheme for optimizing the efficiency of an AC motor drive operated in a pulse-width-modulated mode provides that the modulation frequency of the power furnished to the motor is a function of commanded motor torque and is higher at lower torque requirements than at higher torque requirements. 6 figs.

Konrad, C.E.; Boothe, R.W.

1996-01-23T23:59:59.000Z

389

Method and apparatus for improved efficiency in a pulse-width-modulated alternating current motor drive  

DOE Patents [OSTI]

A scheme for optimizing the efficiency of an AC motor drive operated in a pulse-width-modulated mode provides that the modulation frequency of the power furnished to the motor is a function of commanded motor torque and is higher at lower torque requirements than at higher torque requirements.

Konrad, Charles E. (Roanoke, VA); Boothe, Richard W. (Roanoke, VA)

1996-01-01T23:59:59.000Z

390

Method and apparatus for improved efficiency in a pulse-width-modulated alternating current motor drive  

DOE Patents [OSTI]

A scheme for optimizing the efficiency of an AC motor drive operated in a pulse-width-modulated mode provides that the modulation frequency of the power furnished to the motor is a function of commanded motor torque and is higher at lower torque requirements than at higher torque requirements.

Konrad, Charles E. (Roanoke, VA); Boothe, Richard W. (Roanoke, VA)

1994-01-01T23:59:59.000Z

391

Applications of adjustable speed drives. (Latest citations from the EI Compendex*plus database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning types and applications of adjustable speed drives (ASD). Uses in heat pumps, fans, compressors, electric motors, boiler feed systems, and power transmission are described. Coverage includes AC-DC motors, induction motors, and brushless electric motors. Energy cost savings are also examined. (Contains a minimum of 102 citations and includes a subject term index and title list.)

Not Available

1994-06-01T23:59:59.000Z

392

MYUNGHWAN PARK 6200 Westchester Park Drive, APT 1510, College Park, Maryland 20740  

E-Print Network [OSTI]

MYUNGHWAN PARK 6200 Westchester Park Drive, APT 1510, College Park, Maryland 20740 MOBILE : (+1, and RF PA). · Designed Class D and E RF power amplifier with variable load-pull analysis. Smart Imaging for the high frequency devices (HEMT) Yonsei University, Electronic Device and Materials Laboratory Dec 2005

Lathrop, Daniel P.

393

Transient Analysis of a CMOS Inverter Driving Resistive Interconnect Kevin T. Tang and Eby G. Friedman  

E-Print Network [OSTI]

are characterized by the th power law model. In order to emphasize the nonlinear behavior of a CMOS inverterTransient Analysis of a CMOS Inverter Driving Resistive Interconnect Kevin T. Tang and Eby G. Friedman Department of Electrical and Computer Engineering University of Rochester Rochester, New York

Friedman, Eby G.

394

A Five-Phase Brushless DC-Machine Direct Drive System EPE Journal Vol. 14 no  

E-Print Network [OSTI]

inverter control scheme and higher cost. Control complexity is easily managed with the new generation-leg inverter has been shown to be able to supply two three-phase induction motors; such power structure allows, their inverters, modeling and control. However, polyphase schemes have been used in the past in drive systems

Simões, Marcelo Godoy

395

Power Plant Power Plant  

E-Print Network [OSTI]

Basin Center for Geothermal Energy at University of Nevada, Reno (UNR) 2 Nevada Geodetic LaboratoryStillwater Power Plant Wabuska Power Plant Casa Diablo Power Plant Glass Mountain Geothermal Area Lassen Geothermal Area Coso Hot Springs Power Plants Lake City Geothermal Area Thermo Geothermal Area

Tingley, Joseph V.

396

Study of the Reliability Enhancement of Wind Turbines Employing Direct-drive Technology.  

E-Print Network [OSTI]

??In traditional wind turbines employing gearboxes, the blades spin a shaft that is connected through a gearbox to the generator. The multiple wheels and bearings (more)

Sara George, Reeba

2012-01-01T23:59:59.000Z

397

Direct - drive permanent magnet synchronous generator design for hydrokinetic energy extraction .  

E-Print Network [OSTI]

??"Hydrokinetic turbines deliver lower shaft speeds when compared to both steam and wind turbines. Hence, a water wheel generator must operate at speeds as low (more)

Kashyap, Amshumaan Raghunatha

2013-01-01T23:59:59.000Z

398

US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan  

Broader source: Energy.gov [DOE]

This document describes the vision, mission, scope, and governing policies of the U.S. DRIVE Partnership (Partnership). Dated December 2014.

399

MHK Technologies/Oregon State University Columbia Power Technologies Direct  

Open Energy Info (EERE)

State University Columbia Power Technologies Direct State University Columbia Power Technologies Direct Drive Point Absorber < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Oregon State University Columbia Power Technologies Direct Drive Point Absorber.jpg Technology Profile Primary Organization Oregon State University OSU Project(s) where this technology is utilized *MHK Projects/OSU Direct Drive Power Generation Buoys Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description When the coil experiences a changing magnetic field created by the heaving magnets voltage is generated Technology Dimensions

400

Power Factor Reactive Power  

E-Print Network [OSTI]

power: 130 watts Induction motor PSERC Incandescent lights 0 0.002 0.004 0.006 0.008 0.01 0.012 0.014 0 power: 150 watts #12;Page 4 PSERC Incandescent Lights PSERC Induction motor with no load #12;Page 5 Incandescent Lights #12;Page 7 PSERC Incandescent lights power: Power = 118 V x 1.3 A = 153 W = 0.15 kW = power

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Fact #750: October 22, 2012 Electric Vehicle Energy Requirements...  

Energy Savers [EERE]

vehicle converts roughly 14-26% of the energy from fuel to power the wheels in the same combined driving cycle. Schematic of electric vehicle with energy requirements for...

402

Butler Public Power District | Open Energy Information  

Open Energy Info (EERE)

Butler Public Power District Butler Public Power District Jump to: navigation, search Name Butler Public Power District Place Nebraska Utility Id 2643 Utility Location Yes Ownership P NERC Location MRO Activity Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial/Industrial Rate 04 Three Phase Commercial Commercial/Industrial Single/Three Phase Rate 06 Industrial Commercial/Industrial with demand Rate 07 Three Phase Industrial Grain Bin Single Phase Rate 08 Commercial Grain Bin Three Phase Rate 09 Commercial Irrigation Services Rate 40 Wheels only Single Phase

403

ELECTROCHEMICAL POWER FOR TRANSPORTATION  

E-Print Network [OSTI]

Battery Type Overall Electric Drive System Demonstration ofof batteries and electric drive components and to obtain ain Section 5. Overall Electric Drive System The electric

Cairns, Elton J.

2012-01-01T23:59:59.000Z

404

/ www.sciencexpress.org / 28 January 2010 / Page 1 / 10.1126/science.1185634 Indirect-drive hohlraum experiments at the National  

E-Print Network [OSTI]

the laser power distribution in the hohlraum producing symmetric x-ray drive as inferred from the shape as radiation enclosures that convert the optical laser light into soft x-rays that are characterized at unprecedented laser drive energies of 0.7 MJ. 192 simultaneously fired laser beams heat ignition emulate

405

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

and is powered by two 9V batteries. The motors are placed insuch as the motors, batteries, circuit board, radio

Chen, Po-Ting

2010-01-01T23:59:59.000Z

406

Well-to-wheels energy use and greenhouse gas emissions analysis of plug-in hybrid electric vehicles.  

SciTech Connect (OSTI)

Researchers at Argonne National Laboratory expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model and incorporated the fuel economy and electricity use of alternative fuel/vehicle systems simulated by the Powertrain System Analysis Toolkit (PSAT) to conduct a well-to-wheels (WTW) analysis of energy use and greenhouse gas (GHG) emissions of plug-in hybrid electric vehicles (PHEVs). The WTW results were separately calculated for the blended charge-depleting (CD) and charge-sustaining (CS) modes of PHEV operation and then combined by using a weighting factor that represented the CD vehicle-miles-traveled (VMT) share. As indicated by PSAT simulations of the CD operation, grid electricity accounted for a share of the vehicle's total energy use, ranging from 6% for a PHEV 10 to 24% for a PHEV 40, based on CD VMT shares of 23% and 63%, respectively. In addition to the PHEV's fuel economy and type of on-board fuel, the marginal electricity generation mix used to charge the vehicle impacted the WTW results, especially GHG emissions. Three North American Electric Reliability Corporation regions (4, 6, and 13) were selected for this analysis, because they encompassed large metropolitan areas (Illinois, New York, and California, respectively) and provided a significant variation of marginal generation mixes. The WTW results were also reported for the U.S. generation mix and renewable electricity to examine cases of average and clean mixes, respectively. For an all-electric range (AER) between 10 mi and 40 mi, PHEVs that employed petroleum fuels (gasoline and diesel), a blend of 85% ethanol and 15% gasoline (E85), and hydrogen were shown to offer a 40-60%, 70-90%, and more than 90% reduction in petroleum energy use and a 30-60%, 40-80%, and 10-100% reduction in GHG emissions, respectively, relative to an internal combustion engine vehicle that used gasoline. The spread of WTW GHG emissions among the different fuel production technologies and grid generation mixes was wider than the spread of petroleum energy use, mainly due to the diverse fuel production technologies and feedstock sources for the fuels considered in this analysis. The PHEVs offered reductions in petroleum energy use as compared with regular hybrid electric vehicles (HEVs). More petroleum energy savings were realized as the AER increased, except when the marginal grid mix was dominated by oil-fired power generation. Similarly, more GHG emissions reductions were realized at higher AERs, except when the marginal grid generation mix was dominated by oil or coal. Electricity from renewable sources realized the largest reductions in petroleum energy use and GHG emissions for all PHEVs as the AER increased. The PHEVs that employ biomass-based fuels (e.g., biomass-E85 and -hydrogen) may not realize GHG emissions benefits over regular HEVs if the marginal generation mix is dominated by fossil sources. Uncertainties are associated with the adopted PHEV fuel consumption and marginal generation mix simulation results, which impact the WTW results and require further research. More disaggregate marginal generation data within control areas (where the actual dispatching occurs) and an improved dispatch modeling are needed to accurately assess the impact of PHEV electrification. The market penetration of the PHEVs, their total electric load, and their role as complements rather than replacements of regular HEVs are also uncertain. The effects of the number of daily charges, the time of charging, and the charging capacity have not been evaluated in this study. A more robust analysis of the VMT share of the CD operation is also needed.

Elgowainy, A.; Burnham, A.; Wang, M.; Molburg, J.; Rousseau, A.; Energy Systems

2009-03-31T23:59:59.000Z

407

Flywheel energy and power storage systems  

Science Journals Connector (OSTI)

For ages flywheels have been used to achieve smooth operation of machines. The early models where purely mechanical consisting of only a stone wheel attached to an axle. Nowadays flywheels are complex constructions where energy is stored mechanically and transferred to and from the flywheel by an integrated motor/generator. The stone wheel has been replaced by a steel or composite rotor and magnetic bearings have been introduced. Today flywheels are used as supplementary UPS storage at several industries world over. Future applications span a wide range including electric vehicles, intermediate storage for renewable energy generation and direct grid applications from power quality issues to offering an alternative to strengthening transmission. One of the key issues for viable flywheel construction is a high overall efficiency, hence a reduction of the total losses. By increasing the voltage, current losses are decreased and otherwise necessary transformer steps become redundant. So far flywheels over 10kV have not been constructed, mainly due to isolation problems associated with high voltage, but also because of limitations in the power electronics. Recent progress in semi-conductor technology enables faster switching and lower costs. The predominant part of prior studies have been directed towards optimising mechanical issues whereas the electro technical part now seem to show great potential for improvement. An overview of flywheel technology and previous projects are presented and moreover a 200kW flywheel using high voltage technology is simulated.

Bjrn Bolund; Hans Bernhoff; Mats Leijon

2007-01-01T23:59:59.000Z

408

Center for Power Electronics Systems CENTER PROGRAM SNAPSHOT  

E-Print Network [OSTI]

Research OVERVIEW: Engineered Systems Integrated Motor Drive Systems Power Distribution Systems Sustainable for Power Electron- ics Systems (CPES) are working to make electric power processing more efficient and more electricity to the next step and develop power processing systems of the highest value to society. A SYSTEMS

Beex, A. A. "Louis"

409

HIGH-POWER MILLIMETREWAVE TRANSMISSION SYSTEMS AND COMPONENTS FOR ELECTRON CYCLOTRON HEATING OF FUSION PLASMAS  

Science Journals Connector (OSTI)

At the Institute for Plasma Research at the University of Stuttgart, high-power millimetre wave transmission systems for electron cyclotron heating (ECRH) and current drive (ECCD)...

W. Kasparek; G. Dammertz; V. Erckmann

2005-01-01T23:59:59.000Z

410

DistributionDrive | Open Energy Information  

Open Energy Info (EERE)

DistributionDrive DistributionDrive Jump to: navigation, search Name DistributionDrive Place Addison, Texas Zip 75001 Product Supplier of Biodiesel, Straight Vegetable Oil (SVO), Recycled Vegetable Oil (WVO) and Engine Conversion Kits to use this fuels. Coordinates 38.477365°, -80.412149° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.477365,"lon":-80.412149,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

411

Drive Less, Save More | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

412

Drive Less, Save More | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Drive Less, Save More Drive Less, Save More Drive Less, Save More May 24, 2011 - 12:31pm Addthis Shannon Brescher Shea Communications Manager, Clean Cities Program For someone who works in the Vehicle Technologies Program, I actually don't spend that much time in my automobile. I usually get around using a combination of public transit, my bike, and my own two feet. But I'm an exception. In the U.S., the vehicle miles travelled per person is actually twice as high as it is in Western Europe and three times higher than in Japan. However, alternatives to using your car have a wealth of benefits. In addition to reducing petroleum consumption, they can lower greenhouse gas emissions, improve air quality, decrease stress, and bring communities together. Fortunately, there are a variety of ways to minimize the distance

413

Modular axial-flux permanent-magnet motor for ship propulsion drives  

SciTech Connect (OSTI)

Original features such as compactness and lightness make slotless axial-flux permanent-magnet machines (AFPMs) eligible for application in large power motor drives devoted to the direct drive of ship propellers. This paper discusses characteristics of AFPMs designed for application in marine propulsion, and machine performances such as efficiency, weight and torque density are evaluated for a comparison with those of conventional synchronous machines. A newly-conceived modular arrangement of the machine stator winding is proposed and experimental results taken from a small-size machine prototype are finally shown.

Caricchi, F.; Crescimbini, F.; Honorati, O.

1999-09-01T23:59:59.000Z

414

Short flux paths optimize the efficiency of a 5-phase switched reluctance drive  

SciTech Connect (OSTI)

A new configuration of switched reluctance drive is proposed in which the windings of a 5-phase motor are configured to encourage short flux paths within the motor. The 5-phase prototype motor can be fed from a new power converter which uses only six switching devices in a shared switch configuration. Experimental results demonstrate that the 5-phase prototype achieves higher efficiency than prior arc switched reluctance and induction drives constructed in the same frame size, and with the benefit of the new electronic circuit it is very cost effective.

Michaelides, A.; Pollock, C. [Univ. of Warwick, Coventry (United Kingdom). Dept. of Engineering

1995-12-31T23:59:59.000Z

415

The path to fusion power  

Science Journals Connector (OSTI)

...research and development before they...desirable technology for power...Thus, a gas of deuterium...to drive turbines. These turbines...decrease as the technology matures...intensive development of fusion technologies. One contribution...lithium and a turbine-driven...

2010-01-01T23:59:59.000Z

416

Nonsinusoidal electrical measurement accuracy in adjustable-speed motors and drives  

SciTech Connect (OSTI)

Accurate measurements of voltage, current, and power under nonsinusoidal conditions are essential for determining the efficiency of a drive system and performing separation of losses between an adjustable-speed drive (ASD) and an electric motor. That information is invaluable for equipment designers, manufacturers, and users. Three modern power meters and analyzers were tested to determine their accuracy with various nonsinusoidal waveforms applied. The meters were subjected to waveforms that are characteristic to the three most common fractional and integral horsepower ASD technologies, namely, pulsewidth modulation induction, brushless dc, and switched-reluctance drives. The tests were performed under field conditions and in a computer-controlled laboratory environment. The obtained results show that some meters are able to measure accurately electric power at the input to ASD`s. However, the output power of ASD`s for brushless dc and switched-reluctance technology was not measured with acceptable accuracy by any of the tested meters. Possible reasons of meters inaccuracies and suggestions for performance improvement are presented. Conclusions on the present state of ASD electric power measurements and recommendations for further research are given.

Domijan, A. [Univ. of Florida, Gainesville, FL (United States)] [Univ. of Florida, Gainesville, FL (United States); Czarkowski, D. [Polytechnic Univ., Brooklyn, NY (United States). Dept. of Electrical Engineering] [Polytechnic Univ., Brooklyn, NY (United States). Dept. of Electrical Engineering; Johnson, J.H. [J.H. Johnson Associates, Inc., Tipp City, OH (United States)] [J.H. Johnson Associates, Inc., Tipp City, OH (United States)

1998-11-01T23:59:59.000Z

417

Microsoft Word - ORNL Hard Drives Final 08132010  

Broader source: Energy.gov (indexed) [DOE]

Inspections and Special Inquires Inspections and Special Inquires Inspection Report Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory INS-O-10-03 August 2010 Department of Energy Washington, DC 20585 August 16, 2010 MEMORANDUM FOR THE DIRECTOR, OFFICE OF SCIENCE FROM: Sandra D. Bruce Assistant Inspector General for Inspections and Special Inquiries SUBJECT: INFORMATION: Inspection Report on "Internal Controls over Computer Hard Drives at the Oak Ridge National Laboratory" BACKGROUND The Department of Energy's (Department) Oak Ridge National Laboratory (ORNL) in Oak

418

High frequency fast wave current drive for DEMO  

SciTech Connect (OSTI)

A steady-state tokamak reactor (SSTR) requires a high efficiency current drive system, from plug to driven mega-amps. RF systems working in the ion-cyclotron range of frequencies (ICRF) have high efficiency from plug to antenna but a limited current drive (CD) efficiency and centrally peaked CD profiles. The latter feature is not adequate for a SSTR where the current should be sufficiently broad to keep the central safety factor (possibly significantly) above 1. In addition, the fact that the fast wave (FW) is evanescent at the edge limits coupling, requiring high voltage operation, which makes the system dependent on plasma edge properties and prone to arcing, reducing its reliability. A possible way to overcome these weaknesses is to operate at higher frequency (10 times or more the cyclotron frequency). The advantages are: (1) The coupling can be much better (waves propagate in vacuum) if the parallel refractive index n{sub ||} is kept below one, (2) The FW group velocity tends to align to the magnetic field, so the power circumnavigates the magnetic axis and can drive off-axis current, (3) Due to the latter property, n{sub ||} can be upshifted along the wave propagation path, allowing low n{sub ||} launch (hence good coupling, large CD efficiency) with ultimately good electron absorption (which requires higher n{sub ||}. Note however that the n{sub ||} upshift is a self-organized feature, that electron absorption is in competition with {alpha}-particle absorption and that uncoupling of the FW from the lower hybrid resonance at the edge requires n{sub ||} slightly above one. The latter possibly counterproductive features might complicate the picture. The different aspects of this potentially attractive off-axis FWCD scheme are discussed.

Koch, R.; Lerche, E.; Van Eester, D. [LPP/ERM-KMS, Association 'EURATOM-Belgian State', 1000 Brussels, TEC Partner (Belgium); Nightingale, M. [Culham Centre for Fusion Energy, Abingdon OX14 3DB (United Kingdom)

2011-12-23T23:59:59.000Z

419

66 Int. J. Power Electronics, Vol. 6, No. 1, 2014 Copyright 2014 Inderscience Enterprises Ltd.  

E-Print Network [OSTI]

Engineering. During 2011­2012, he was a joint PhD student with the DOE GATE Center for Electric Drive, and Director of the newly established DOE funded GATE Center for Electric Drive Transportation interests include electric drives, power electronics, electric machines; renewable energy systems

Mi, Chunting "Chris"

420

"It's Like Giving Us a Car, Only Without the Wheels": Performance of Latina Students at an Early College High School  

E-Print Network [OSTI]

School. (December 2011) Leslie Ann Locke, B.S.; M.L.S, University of Minnesota?Twin Cities Chair of Advisory Committee: Dr. Kathryn McKenzie This dissertation presents the results from an empirical study of the perspectives of Latina students who... ?IT?S LIKE GIVING US A CAR, ONLY WITHOUT THE WHEELS?: PERFORMANCE OF LATINA STUDENTS AT AN EARLY COLLEGE HIGH SCHOOL A Dissertation by LESLIE ANN LOCKE Submitted to the Office of Graduate Studies of Texas A&M University...

Locke, Leslie Ann

2012-02-14T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

The making of driving cultures Jane Moeckli  

E-Print Network [OSTI]

and traffic safety as effects of culture. In order to understand culture's role in shaping driving behavior of culture. We argue that how the traffic safety community defines culture dictates courses of action taken traffic safety. It is our hope that these suggestions will expand the definition of culture to better

Lee, John D.

422

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

1988-01-01T23:59:59.000Z

423

COMMITMENT & INTEGRITY DRIVE RESULTS Industry, Nonprofit,  

E-Print Network [OSTI]

-containing particles in wastewater. #12;000000.00 3COMMITMENT & INTEGRITY DRIVE RESULTS My Industry Experience 6 years, drinking water, sanitary wastewater, industrial wastewater, and stormwater Worked for private industry of waste, materials storage, product recycling, remediation, property transfers Internal Pressures Profit

Lipson, Michal

424

Safety Considerations When Driving on Rural Roads  

E-Print Network [OSTI]

procedures to follow. Characteristics of rural or forest roads Extra caution is required when driving-moving vehicles, animals, debris) · Unusually steep hills or sharp curves Since help may often be difficult.Agricultural or prescribed forest burning may produce smoke on roads. Hazard: Approaching vehicles, livestock or wild animals

Vivoni, Enrique R.

425

Recent Transitions in Ethiopian Homegarden Agroforestry: Driving  

E-Print Network [OSTI]

of the system dynamics shows that all underlying driving forces interact with each other and cause change, shrinking farm size, poverty and a new market situation and has gradually been changing towards monoculture production of khat (Catha edulis) and eucalyptus species. The consequence of the transitions on ecology

426

BRAF Inactivation Drives Aneuploidy by Deregulating CRAF  

Science Journals Connector (OSTI)

...o mice were born alive at a frequency of 13% and these adult mice...S4). Significantly, the frequency of diploid metaphases decreased...kinetics of tetraploidization was variable (Fig. 4C). Aneuploidization...Craf activation, and this drives aneuploidy in the spleen and...

Tamihiro Kamata; Jahan Hussain; Susan Giblett; Robert Hayward; Richard Marais; and Catrin Pritchard

2010-11-01T23:59:59.000Z

427

Program assists steam drive design project  

SciTech Connect (OSTI)

A new program for the HP-41CV programmable calculator will compute all parameters required for a steam drive project design. The Marx and Langenheim model assumptions are used to solve a more advanced version of the Myhill and Stegemeier model. Also, the Mandl and Volek model assuptions are used to compute the size of the steam zone.

Mendez, A.A.

1984-08-27T23:59:59.000Z

428

Energy Department Invests $13 Million to Drive Innovative U.S. Solar  

Broader source: Energy.gov (indexed) [DOE]

3 Million to Drive Innovative U.S. 3 Million to Drive Innovative U.S. Solar Manufacturing Energy Department Invests $13 Million to Drive Innovative U.S. Solar Manufacturing December 11, 2013 - 10:44am Addthis News Media Contact (202) 586-4940 WASHINGTON -- Building on the Energy Department's all-of-the-above energy strategy to continue U.S. leadership in clean energy innovation, the Department today announced over $13 million for five projects to strengthen domestic solar manufacturing and speed commercialization of efficient, affordable photovoltaic and concentrating solar power technologies. As part of the Department's SunShot Initiative, these awards will help lower the cost of solar electricity, support a growing U.S. solar workforce and increase U.S. competitiveness in the global clean energy market.

429

Technology and physics implications of oscillating-field current drive in reversed-field pinches  

SciTech Connect (OSTI)

The property of reversed-field pinches (RFPs) to relax to a near- minimum-energy state is the basis of oscillating-field current drive (OFCD), wherein plasma current is driven by modulating in quadrature the external toroidal and poloidal magnetic fields. Coupled plasma/circuit OFCD simulations of RFPs ranging from present experiments (ZT-P and ZT-40M) to the reactor (TITAN) indicate that the drive frequency and the amplitude of the plasma-current oscillations decrease with decreased plasma resistance so that minimum frequencies (/approximately/25 Hz) and plasma-current amplitudes (/approximately/1.6%) and maximum efficiencies (/approximately/0.3 A/W) are attained in the reactor regime. Methods for minimizing the reactive powers and for optimizing the current-drive efficiency for OFCD in RFPs have been identified. 15 refs., 4 figs., 1 tab.

Bathke, C.G.; Krakowski, R.A.; Schoenberg, K.F.

1988-01-01T23:59:59.000Z

430

Solar receiver heliostat reflector having a linear drive and position information system  

DOE Patents [OSTI]

A heliostat for a solar receiver system comprises an improved drive and control system for the heliostat reflector assembly. The heliostat reflector assembly is controllably driven in a predetermined way by a light-weight drive system so as to be angularly adjustable in both elevation and azimuth to track the sun and efficiently continuously reflect the sun's rays to a focal zone, i.e., heat receiver, which forms part of a solar energy utilization system, such as a solar energy fueled electrical power generation system. The improved drive system includes linear stepping motors which comprise low weight, low cost, electronic pulse driven components. One embodiment comprises linear stepping motors controlled by a programmed, electronic microprocessor. Another embodiment comprises a tape driven system controlled by a position control magnetic tape.

Horton, Richard H. (Schenectady, NY)

1980-01-01T23:59:59.000Z

431

Aircraft Power Generators: Hybrid Modeling and  

E-Print Network [OSTI]

Aircraft Power Generators: Hybrid Modeling and Simulation for Fault Detection ASHRAF TANTAWY University Integrated drive generators (IDGs) are the main source of electrical power for a number, and a majority of the existing FDI techniques for the electrical subsystem (brushless generator) are based

Koutsoukos, Xenofon D.

432

Santee-1-E Wholesale Power Rate Schedule | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

1-E Wholesale Power Rate Schedule 1-E Wholesale Power Rate Schedule Santee-1-E Wholesale Power Rate Schedule Area: Central, Bamberg, and Georgetown System: Georgia-Alabama-South Carolina This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter call the Customer) in South Carolina to whom power may be wheeled and scheduled pursuant to contracts between the Government and South Carolina Public Service Authority (hereinafter called the Authority). This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. This rate schedule does

433

Santee-2-E Wholesale Power Rate Schedule | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

2-E Wholesale Power Rate Schedule 2-E Wholesale Power Rate Schedule Santee-2-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina This rate schedule shall be available to public bodies and cooperatives (any one of whom is hereinafter call the Customer) in South Carolina to whom power may be wheeled pursuant to contracts between the Government and South Carolina Public Service Authority (hereinafter called the Authority). This rate schedule shall be applicable to the sale at wholesale of power and accompanying energy generated at the Allatoona, Buford, J. Strom Thurmond, Walter F. George, Hartwell, Millers Ferry, West Point, Robert F. Henry, Carters and Richard B. Russell Projects and sold under appropriate contracts between the Government and the Customer. This rate schedule does

434

High-speed gears for gas turbine drive  

SciTech Connect (OSTI)

Recently, Lufkin Industries, Power Transmission Div., full-load tested a high-speed gear designed to couple a 50 Hz electric power generator to a GE LM6000 gas turbine for a power generation project in Australia. The gear is rated 52.2 MW to match the output of the LM6000 gas turbine believed to be one of the largest gear testing operations for this type and size of gear. Each gear drive manufactured by Lufkin is full-speed tested to verify its performance. Tests performed on high-speed units duplicate field conditions, as closely as possible, in order to verify critical speed analysis results and new bearing designs, if used. Lufkin also tests design techniques used in the development of new products. The finite element analysis performed to predict housing deflection in the thrust bearing area of a new extruder driveline was verified by testing of a prototype unit housing. Recently, housing structure stiffness and natural frequencies were predicted and verified on the test stand for some 50 MW vertically offset gear units. A complete data acquisition system is used to gather data from bearing, inlet and drain temperature monitoring points. The temperature monitoring system will accommodate type T,K,J, and E thermocouples and platinum and nickel RTDs.

Kane, J.

1995-06-01T23:59:59.000Z

435

Evaluation of 2004 Toyota Prius Hybrid Electic Drive System Interim Report - Revised  

SciTech Connect (OSTI)

The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery-powered electric motor. Both of these motive power sources are capable of providing mechanical drive power for the vehicle. The engine can deliver a peak power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak power output of 50 kW at 1300 rpm. Together, this engine-motor combination has a specified peak power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. Laboratory tests were conducted to evaluate the electrical and mechanical performance of the 2004 Toyota Prius and its hybrid electric drive system. As a hybrid vehicle, the 2004 Prius uses both a gasoline-powered internal combustion engine and a battery-powered electric motor as motive power sources. Innovative algorithms for combining these two power sources results in improved fuel efficiency and reduced emissions compared to traditional automobiles. Initial objectives of the laboratory tests were to measure motor and generator back-electromotive force (emf) voltages and determine gearbox-related power losses over a specified range of shaft speeds and lubricating oil temperatures. Follow-on work will involve additional performance testing of the motor, generator, and inverter. Information contained in this interim report summarizes the test results obtained to date, describes preliminary conclusions and findings, and identifies additional areas for further study.

Ayers, C.W.; Hsu, J.S.; Marlino, L.D.; Miller, C.W.; Ott, G.W., Jr.; Oland, C.B.; Burress, T.A.

2007-07-31T23:59:59.000Z

436

Alternative Fuels Data Center: Texas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Texas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Texas Laws and Incentives for Driving / Idling

437

Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nebraska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nebraska Laws and Incentives for Driving / Idling

438

Alternative Fuels Data Center: Maine Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maine Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maine Laws and Incentives for Driving / Idling

439

Alternative Fuels Data Center: Federal Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Federal Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Federal Laws and Incentives for Driving / Idling

440

Alternative Fuels Data Center: Florida Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Florida Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Florida Laws and Incentives for Driving / Idling

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Alternative Fuels Data Center: Iowa Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Iowa Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Iowa Laws and Incentives for Driving / Idling

442

Alternative Fuels Data Center: Maryland Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Maryland Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Maryland Laws and Incentives for Driving / Idling

443

Alternative Fuels Data Center: Alaska Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Alaska Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Alaska Laws and Incentives for Driving / Idling

444

Alternative Fuels Data Center: Vermont Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Vermont Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Vermont Laws and Incentives for Driving / Idling

445

Vehicle Technologies Office: Fact #452: January 15, 2007 Driving  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

2: January 15, 2: January 15, 2007 Driving Differences to someone by E-mail Share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Facebook Tweet about Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Twitter Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Google Bookmark Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Delicious Rank Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on Digg Find More places to share Vehicle Technologies Office: Fact #452: January 15, 2007 Driving Differences on AddThis.com... Fact #452: January 15, 2007 Driving Differences Those living in the center city drive fewer miles in a day than those in

446

Alternative Fuels Data Center: Indiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Indiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Indiana Laws and Incentives for Driving / Idling

447

Alternative Fuels Data Center: Delaware Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Delaware Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Delaware Laws and Incentives for Driving / Idling

448

Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wyoming Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wyoming Laws and Incentives for Driving / Idling

449

Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oklahoma Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oklahoma Laws and Incentives for Driving / Idling

450

Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Hawaii Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Hawaii Laws and Incentives for Driving / Idling

451

Alternative Fuels Data Center: Virginia Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Virginia Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Virginia Laws and Incentives for Driving / Idling

452

Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Tennessee Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Tennessee Laws and Incentives for Driving / Idling

453

Alternative Fuels Data Center: Oregon Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Oregon Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Oregon Laws and Incentives for Driving / Idling

454

Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Minnesota Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Minnesota Laws and Incentives for Driving / Idling

455

Alternative Fuels Data Center: Missouri Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Missouri Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Missouri Laws and Incentives for Driving / Idling

456

Alternative Fuels Data Center: Utah Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Utah Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Utah Laws and Incentives for Driving / Idling

457

Alternative Fuels Data Center: Idaho Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Idaho Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idaho Laws and Incentives for Driving / Idling

458

Alternative Fuels Data Center: Illinois Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Illinois Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Illinois Laws and Incentives for Driving / Idling

459

Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kentucky Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kentucky Laws and Incentives for Driving / Idling

460

Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Louisiana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Louisiana Laws and Incentives for Driving / Idling

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Alternative Fuels Data Center: Arizona Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Arizona Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Arizona Laws and Incentives for Driving / Idling

462

Alternative Fuels Data Center: Nevada Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Nevada Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Nevada Laws and Incentives for Driving / Idling

463

Alternative Fuels Data Center: Montana Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Montana Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Montana Laws and Incentives for Driving / Idling

464

Alternative Fuels Data Center: Colorado Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Colorado Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Colorado Laws and Incentives for Driving / Idling

465

Alternative Fuels Data Center: Kansas Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Kansas Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Kansas Laws and Incentives for Driving / Idling

466

Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Wisconsin Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Wisconsin Laws and Incentives for Driving / Idling

467

Drive piston assembly for a valve actuator assembly  

DOE Patents [OSTI]

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

Sun, Zongxuan (Troy, MI)

2010-02-23T23:59:59.000Z

468

The history of the bicycle goes back to the 1800's. Investigating the innovative changes in materials, changeable gears, wheel sizes and frame shapes over the past two hundred years  

E-Print Network [OSTI]

the innovative changes in materials, changeable gears, wheel sizes and frame shapes over the past two hundred in the 1970's that had bigger tires, at handle bars, and a bigger wheel base that all provided more control is a diagram labeling the components of a bicycle. The pieces that make up the frame of the bicycle

Belanger, David P.

469

PowerPoint Presentation  

Broader source: Energy.gov (indexed) [DOE]

Vehicle to Grid Vehicle to Grid Demonstration Project by Willett Kempton College of Earth, Ocean, and Environment Department of Electrical and Computer Engineering Center for Carbon-free Power Integration University of Delaware 2010 Smart Grid Peer Review Office of Electricity Delivery and Energy Reliability, DOE Purpose & Objectives * Create the Gri d I ntegrated V ehi cl e (GIV), then operate, permit, and test it * A nalyze vehicle use, our vehicles & large data base of 400 vehicles daily driving * A nalyze market for EVs and V2G * Develop softw are to dispatch pow er from vehicles -> Operate in real time! * Tw o-year aw ard, $750,000, close N ov '10 Activities (2-year) * Research: Driving patterns; economic value; self-learning trip predictions * Industrial: Facilitate EV retrofit operation

470

PO. 254 Control of Power Train Loads  

E-Print Network [OSTI]

Abstract summary Variable loads along the power train are the primary cause attributed to the failure of gears, bearings, and other mechanical components. The concept of anticipatory control applied to a wind power train is presented. This new approach to power train load management is based on the data reflecting the current status of the power train. The model driving the optimization of the power train loads considers four different objectives, including minimization of the torque variability and power maximization. A software tool for power train load management is presented. This new approach to power train load control is based on the data reflecting the current status of the power train. Such data is collected by a typical SCADA system. The model driving the optimization of the power train loads considers four different objectives, including minimization of the torque variability and power maximization. Details of the model that is applicable to different turbines are presented Objectives Goal: Transform a wind a farm into a wind power plant Example objectives: ? Minimization of the torque ramp rate ? Maximization of the power produced ? Maximization of the power quality Modify the shape of the power curve Methods Data mining/Knowledge discovery

Andrew Kusiak

471

U.S. Solar Power Market  

SciTech Connect (OSTI)

The report provides an overview of the domestic market for solar, including a concise look at the steps being taken to grow solar power in the U.S. Topics covered include: an overview of solar power including its history, the current market environment, and its future prospects; an analysis of the key business factors that are driving interest in solar power; a description of solar power technologies; a review of the economics of solar power; a discussion of the key markets for solar power; and, profiles of domestic solar cell/module manufacturers.

NONE

2007-08-15T23:59:59.000Z

472

Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Concentrating solar power Concentrating solar power (Redirected from Concentrating Solar Power) Jump to: navigation, search Concentrating Solar Power Basics (The following text is derived from NREL's concentrating solar power information page.)[1] Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity. Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower

473

Concentrating solar power | Open Energy Information  

Open Energy Info (EERE)

Concentrating solar power Concentrating solar power (Redirected from - Concentrating Solar Power) Jump to: navigation, search Concentrating Solar Power Basics (The following text is derived from NREL's concentrating solar power information page.)[1] Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity. Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower

474

Predictions of fast wave heating, current drive, and current drive antenna arrays for advanced tokamaks  

SciTech Connect (OSTI)

The objective of the advanced tokamak program is to optimize plasma performance leading to a compact tokamak reactor through active, steady state control of the current profile using non-inductive current drive and profile control. To achieve these objectives requires compatibility and flexibility in the use of available heating and current drive systems--ion cyclotron radio frequency (ICRF), neutral beams, and lower hybrid. For any advanced tokamak, the following are important challenges to effective use of fast waves in various roles of direct electron heating, minority ion heating, and current drive: (1) to employ the heating and current drive systems to give self-consistent pressure and current profiles leading to the desired advanced tokamak operating modes; (2) to minimize absorption of the fast waves by parasitic resonances, which limit current drive; (3) to optimize and control the spectrum of fast waves launched by the antenna array for the required mix of simultaneous heating and current drive. The authors have addressed these issues using theoretical and computational tools developed at a number of institutions by benchmarking the computations against available experimental data and applying them to the specific case of TPX.

Batchelor, D.B.; Baity, F.W.; Carter, M.D. [and others

1994-12-31T23:59:59.000Z

475

Energy management of power-split plug-in hybrid electric vehicles based on simulated annealing and Pontryagin's minimum principle  

E-Print Network [OSTI]

Energy management of power-split plug-in hybrid electric vehicles based on simulated annealing management method is proposed for a power-split plug-in hybrid electric vehicle (PHEV). Through analyzing and hybrid driving mode. During the pure electric driving mode, the vehicle is only powered by the battery

Mi, Chunting "Chris"

476

Flash Steam Power Plant | Open Energy Information  

Open Energy Info (EERE)

Flash Steam Power Plant Flash Steam Power Plant (Redirected from Flash Steam Power Plants) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Flash Steam Power Plants General List of Flash Steam Plants Flash Steam power plant process diagram - DOE EERE 2012 Flash steam plants are the most common type of geothermal power generation plants in operation in the world today. Fluid at temperatures greater than 360°F (182°C) is pumped under high pressure into a tank at the surface held at a much lower pressure, causing some of the fluid to rapidly vaporize, or "flash." The vapor then drives a turbine, which drives a generator. If any liquid remains in the tank, it can be flashed again in a second tank to extract even more energy.[1] Facility Name Owner Capacity (MW) Facility

477

Driving Energy Performance with Energy Management Teams  

E-Print Network [OSTI]

Driving Energy Performance with Energy Management Teams Meredith Younghein ENERGY STAR Industrial Communications Mgr. U.S. Environmental Protection Agency Washington, DC ABSTRACT Companies today face an uncertain energy future. Businesses... face escalating energy prices which can erode profits. Concerns over supply reliability, and possible regulation of carbon emissions create risk. For many industries in the U.S., energy costs are equal to the cost of raw materials or even employee...

Younghein, M.; Tunnessen, W.

2006-01-01T23:59:59.000Z

478

Evaluation of 2004 Toyota Prius Hybrid Electric Drive System Interim Report  

SciTech Connect (OSTI)

Laboratory tests were conducted to evaluate the electrical and mechanical performance of the 2004 Toyota Prius and its hybrid electric drive system. As a hybrid vehicle, the 2004 Prius uses both a gasoline-powered internal combustion engine and a battery-powered electric motor as motive power sources. Innovative algorithms for combining these two power sources results in improved fuel efficiency and reduced emissions compared to traditional automobiles. Initial objectives of the laboratory tests were to measure motor and generator back-electromotive force (emf) voltages and determine gearbox-related power losses over a specified range of shaft speeds and lubricating oil temperatures. Follow-on work will involve additional performance testing of the motor, generator, and inverter. Information contained in this interim report summarizes the test results obtained to date, describes preliminary conclusions and findings, and identifies additional areas for further study.

Ayers, C.W.

2004-11-23T23:59:59.000Z

479

Cascaded H-bridge inverter motor drives for hybrid electric vehicle applications  

Science Journals Connector (OSTI)

This paper presents the asymmetric cascaded H-bridge multilevel inverter for electric vehicles (EV) and hybrid electric vehicles (HEV) applications. Currently available power inverter systems for HEVs use a DC-DC boost converter to boost the battery voltage for a traditional three-phase inverter. The present HEV drive inverters have low power density, are expensive, and have low efficiency because they need a bulky inductor. Asymmetric cascaded H-bridge multilevel inverter design for EV and HEV applications without the use of inductors to output a boosted AC voltage is proposed in this paper. Traditionally, each H-bridge needs a DC power supply having equal values of DC power sources. The proposed design uses the asymmetric cascaded multilevel inverter using non-equal DC power sources based on specified ratios. A fundamental switching scheme is used to do modulation control and to produce a seven-level phase voltage.

P. Renuga; T. Prathiba

2012-01-01T23:59:59.000Z

480

Optimizing the Configuration and Control of a Novel Human-Powered Energy Harvesting System  

E-Print Network [OSTI]

human foot-strikes and power low-power wearable systems in a self-sustaining manner. Dielectric the energy produced by a user's foot strikes and drive a target wearable system in a self-sustaining manner

Potkonjak, Miodrag

Note: This page contains sample records for the topic "wheel drive power" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Alternative Fuels Data Center: California Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: California Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

482

Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Pennsylvania Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

483

Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Mississippi Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

484

An Optimization Model for Eco-Driving at Signalized Intersection  

E-Print Network [OSTI]

This research develops an optimization model for eco-driving at signalized intersection. In urban areas, signalized intersections are the hot spots of air emissions and have significant negative environmental and health impacts. Eco-driving is a...

Chen, Zhi

2013-07-15T23:59:59.000Z

485

DOE Releases U.S. DRIVE Technical Accomplishments Report | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Enhanced materials and designs that can reduce the cost of on-board hydrogen storage tanks by 15% U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy...

486

Do You Drive a Hybrid Electric Vehicle? | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Do You Drive a Hybrid Electric Vehicle? Do You Drive a Hybrid Electric Vehicle? July 9, 2009 - 1:34am Addthis In Tuesday's entry, Francis X. Vogel from the Wisconsin Clean Cities...

487

Fact #759: December 24, 2012 Rural vs. Urban Driving Differences  

Broader source: Energy.gov [DOE]

According to the National Household Travel Survey, those living in rural areas drive ten more miles in a day than those who live in cities. People living in the suburbs drive only about three to...

488

Transport Research Arena 2014, Paris Driving assistances for senior drivers  

E-Print Network [OSTI]

and to analyse actual driving behaviours and specific difficulties of older drivers in ecological driving conditions, using an instrumented vehicle on open roads. The aim is then to ergonomically specify and design

Paris-Sud XI, Université de

489

Economical Aspects of Adjustable Speed Drives in Pumping Systems  

E-Print Network [OSTI]

Speed variations of pumps have become increasingly popular as the technology to produce variable frequency drives has progressed. Variable speed drives have many advantages compared to throttle valves when it comes to regulation of flow. They offer...

Hovstadius, G.

490

Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Connecticut Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

491

Alternative Fuels Data Center: Washington Laws and Incentives for Driving /  

Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

Driving / Idling to someone by E-mail Driving / Idling to someone by E-mail Share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Facebook Tweet about Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Twitter Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Google Bookmark Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Delicious Rank Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on Digg Find More places to share Alternative Fuels Data Center: Washington Laws and Incentives for Driving / Idling on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type

492

Indianapolis Offers a Lesson on Driving Demand | Department of...  

Broader source: Energy.gov (indexed) [DOE]

Indianapolis Offers a Lesson on Driving Demand Indianapolis Offers a Lesson on Driving Demand The flier for EcoHouse, with the headline 'Save energy, save money, improve your home'...

493

GenDrive Limited | Open Energy Information  

Open Energy Info (EERE)

GenDrive Limited GenDrive Limited Jump to: navigation, search Name GenDrive Limited Place Cambridge, United Kingdom Zip CB23 3GY Sector Renewable Energy, Solar, Wind energy Product Developing a range of grid-connected inverters, 'Plug & Play', for renewable energy (mostly solar and wind) systems. These are intended to improve ease of installation. Coordinates 43.003745°, -89.017499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.003745,"lon":-89.017499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

494

Energetic Drives LLC | Open Energy Information  

Open Energy Info (EERE)

Energetic Drives LLC Energetic Drives LLC Jump to: navigation, search Name Energetic Drives LLC Place Gresham, Oregon Zip 97030 Sector Efficiency, Wind energy Product Oregon-based engineering firm that conducts industrial efficiency improvements, as well as repair and maintenance work for grid-tie inverters and wind turbines ranging from 10kW to 1.2MW. Coordinates 44.84866°, -88.786959° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.84866,"lon":-88.786959,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

495

FED-A, an advanced performance FED based on low safety factor and current drive  

SciTech Connect (OSTI)

The FED-A study aims to quantify the potential improvement in cost-effectiveness of the Fusion Engineering Device (FED) by assuming low safety factor q (less than 2 as opposed to about 3) at the plasma edge and noninductive current drive (as opposed to only inductive current drive). The FED-A performance objectives are set to be : (1) ignition assuming International Tokamak Reactor (INTOR) plamsa confinement scaling, but still achieving a fusion power amplification Q greater than or equal to 5 when the confinement is degraded by a factor of 2; (2) neutron wall loading of about 1 MW/m/sup 2/, with 0.5 MW/m/sup 2/ as a conservative lower bound; and (3) more clearly power-reactor-like operations, such as steady state.

Peng, Y.K.M.; Rutherford, P.H.

1983-08-01T23:59:59.000Z

496

Wind Power | Open Energy Information  

Open Energy Info (EERE)

Wind Power Wind Power Jump to: navigation, search Wind Power WIndfarm.Sunset.jpg Wind power is a form of solar energy.[1] Wind is caused by the uneven heating of the atmosphere by the sun, variations in the earth's surface, and rotation of the earth. Mountains, bodies of water, and vegetation all influence wind flow patterns[2], [3]. Wind energy (or wind power) describes the process by which wind is used to generate electricity. Wind turbines convert the energy in wind to electricity by rotating propeller-like blades around a rotor. The rotor turns the drive shaft, which turns an electric generator.[2] Three key factors affect the amount of energy a turbine can harness from the wind: wind speed, air density, and swept area.[4] Mechanical power can also be utilized directly for specific tasks such as

497

A remotely steered millimetre wave launcher for electron cyclotron heating and current drive on ITER  

Science Journals Connector (OSTI)

High-power millimetre wave beams employed on ITER for heating and current drive at the 170GHz electron cyclotron resonance frequency require agile steering and tight focusing of the beams to suppress neoclassical tearing modes. This paper presents experimental validation of the remote steering (RS) concept of the ITER upper port millimetre wave beam launcher. Remote steering at the entrance of the upper port launcher rather than at the plasma side offers advantages in reliability and maintenance of the mechanically vulnerable steering system. A one-to-one scale mock-up consisting of a transmission line, mitre bends, remote steering unit, vacuum window, square corrugated waveguide and front mirror simulates the ITER launcher design configuration. Validation is based on low-power heterodyne measurements of the complex amplitude and phase distribution of the steered Gaussian beam. High-power (400kW) short pulse (10ms) operation under vacuum, diagnosed by calorimetry and thermography of the near- and far-field beam patterns, confirms high-power operation, but shows increased power loss attributed to deteriorating input beam quality compared with low-power operation. Polarization measurements show little variation with steering, which is important for effective current drive requiring elliptical polarization for O-mode excitation. Results show that a RS range of up to ?12 to +12 can be achieved with acceptable beam quality. These measurements confirm the back-up design of the ITER ECRH&CD launcher with future application for DEMO.

W.A. Bongers; M.F. Graswinckel; A.P.H. Goede; W. Kasparek; I. Danilov; . Fernndez Curto; M.R. de Baar; M.A. van den Berg; A.J.H. Donn; B.S.Q. Elzendoorn; R. Heidinger; P. Ivanov; O.G. Kruijt; B. Lamers; A. Meier; B. Piosczyk; B. Plaum; D.M.S. Ronden; D.J. Thoen; M. Schmid; A.G.A. Verhoeven

2010-01-01T23:59:59.000Z

498

FY 2014 Annual Progress Report- Electric Drive Technologies Program  

Broader source: Energy.gov [DOE]

FY 2014 Annual Progress Report for the Electric Drive Technologies Program of the Vehicle Technologies Office, DOE/EE-1163

499

Increasing Student Interest and Comprehension in Power Engineering Education at the Graduate and Undergraduate Levels  

E-Print Network [OSTI]

contains elective courses such as power system analysis, power electronics and drives, advanced electric curriculum in electric power engineering. The main focus of the paper is the modernization of the way power and electric power quality are described. The implementation of changes as those reported here were made

500

Low Power Filtering Techniques for Wideband and Wireless Applications  

E-Print Network [OSTI]

This dissertation presents design and implementation of continuous time analog filters for two specific applications: wideband analog systems such as disk drive channel and low-power wireless applications. Specific focus has been techniques...

Gambhir, Manisha

2010-10-12T23:59:59.000Z