Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

In-line drivetrain and four wheel drive work machine using same  

DOE Patents [OSTI]

A four wheel drive articulated mine loader is powered by a fuel cell and propelled by a single electric motor. The drivetrain has the first axle, second axle, and motor arranged in series on the work machine chassis. Torque is carried from the electric motor to the back differential via a pinion meshed with the ring gear of the back differential. A second pinion oriented in an opposite direction away from the ring gear is coupled to a drive shaft to transfer torque from the ring gear to the differential of the front axle. Thus, the ring gear of the back differential acts both to receive torque from the motor and to transfer torque to the forward axle. The in-line drive configuration includes a single electric motor and a single reduction gear to power the four wheel drive mine loader.

Hoff, Brian (East Peoria, IL)

2008-08-05T23:59:59.000Z

2

Tip-up and stabilization of an autonomous four-wheeled vehicle  

E-Print Network [OSTI]

An instrumented four-wheeled robot was constructed to investigate steering-induced tip-up and rollover of four-wheeled vehicles, and the possibility of stabilizing and driving while balanced on two wheels. Using an analogy ...

Lan, Justin T

2011-01-01T23:59:59.000Z

3

Energy Upgrade California Drives Demand From Behind the Wheel...  

Energy Savers [EERE]

Upgrade California Drives Demand From Behind the Wheel Energy Upgrade California Drives Demand From Behind the Wheel Photo of a trailer with the Energy Upgrade California logo and...

4

Multistage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-drive wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be the best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly conceived AFPM which has a multistage structure and a water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multistage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 215 N{center_dot}m, 1,100 r/min.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering] [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1996-07-01T23:59:59.000Z

5

Vibrotactile Feedback in Steering Wheel Reduces Navigation Errors during GPS-Guided Car Driving  

E-Print Network [OSTI]

vibration motors are mounted onto the steering wheel of a driving simulator and driving experiments-based car navigation system to improve the navigation performance of a driver. In [5], vibration motors were auditory noise and distraction exist in the environment, the navigation errors (making a wrong turn

Basdogan, Cagatay

6

Design of a triple singularity drive for mobile wheeled robots  

E-Print Network [OSTI]

This thesis encompasses the development of a mobile robotic platform using three singularity drive modules. The process begins with a review of other omnidirectional platforms, comparing and contrasting their strengths and ...

Carothers, Jeffrey (Jeffrey W.)

2014-01-01T23:59:59.000Z

7

A CASTOR WHEEL CONTROLLER FOR DIFFERENTIAL DRIVE WHEELCHAIRS  

E-Print Network [OSTI]

on the front axis), and the tire material (rubber), the addi- tional force to change the angle of the castor by the equipped laser scanners and brakes in time if an obstacle is danger- ously close to the wheelchair. During for different grounds and tire materials, but without a projection of these forces to the differential drive

Bremen, Universität

8

Multi-stage axial-flux PM machine for wheel direct drive  

SciTech Connect (OSTI)

The design of direct-driven wheel motors must comply with diameter restriction due to housing the motor in a wheel rim and allow the achievement of very high torque density and overload capability. Slotless axial-flux permanent magnet machines (AFPMs) prove to be one best candidate for application in electric vehicles as direct-drive wheel motors, as in comparison with conventional machines they allow designs with higher compactness, lightness and efficiency. The paper presents a newly-conceived AFPM which has multi-stage structure and water-cooled ironless stator. In the proposed new topology of the machine the space formerly occupied by the toroidal core becomes a water duct, which removes heat directly from the interior surface of the stator winding. The high efficiency of the machine cooling arrangement allows long-term 100% overload operation and great reduction of the machine weight. The multistage structure of the machine is suited to overcome the restriction on the machine diameter and meet the torque required at the wheel shaft. The paper gives guidelines for the design of a multi-stage AFPM with water-cooled ironless stator, and describes characteristics of a two-stage prototype machine rated 220 Nm, 1,100 rpm.

Caricchi, F.; Crescimbini, F.; Mezzetti, F.; Santini, E. [Univ. of Rome La Sapienza (Italy). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

9

Biomechanical analysis of transporting loads with a large four-wheel cart  

E-Print Network [OSTI]

The purpose of this study was to compare the traditional large metal waste carts currently in use in industry to a plastic waste cart with the same load capacity. This was done through initial pull force studies using a dynamometer and biomechanical...

Abell, David Wayne

1997-01-01T23:59:59.000Z

10

gRAPI: An indoor four-wheeled robot API for a gumstix connexTM Michael Simmons  

E-Print Network [OSTI]

-Maxx RC electric monster truck. gRAPI was developed to control four main components: servo, motor, range be implemented. #12;List of Figures Figure 1.1 - ISL Hallway Hummer 1.2 - IRIS Minimoto electric ATV project prior to modifications 1.3 - Current state of IRIS Minimoto electric ATV project 3.1 - TraxxasTM E

11

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2006-01-10T23:59:59.000Z

12

Grinding Wheel System  

DOE Patents [OSTI]

A grinding wheel system includes a grinding wheel with at least one embedded sensor. The system also includes an adapter disk containing electronics that process signals produced by each embedded sensor and that transmits sensor information to a data processing platform for further processing of the transmitted information.

Malkin, Stephen (Amherst, MA); Gao, Robert (Amherst, MA); Guo, Changsheng (South Windsor, CT); Varghese, Biju (Worthington, OH); Pathare, Sumukh (Waltham, MA)

2003-08-05T23:59:59.000Z

13

Wheeled hopping robot  

DOE Patents [OSTI]

The present invention provides robotic vehicles having wheeled and hopping mobilities that are capable of traversing (e.g. by hopping over) obstacles that are large in size relative to the robot and, are capable of operation in unpredictable terrain over long range. The present invention further provides combustion powered linear actuators, which can include latching mechanisms to facilitate pressurized fueling of the actuators, as can be used to provide wheeled vehicles with a hopping mobility.

Fischer, Gary J. (Albuquerque, NM)

2010-08-17T23:59:59.000Z

14

Driving the Future Argonne's vehicle systems reseArch  

E-Print Network [OSTI]

and commercialization of next- generation vehicles. APRF engineers use the facility's two-wheel drive (2WD) and four, drivetrain components, control strategies and

Kemner, Ken

15

Just build it! : a fully functional concept vehicle using robotic wheels  

E-Print Network [OSTI]

Interest in electric vehicle drive units is resurging with the proliferation of hybrid and electric vehicles. Currently emerging key-technologies are: in-wheel motors, electric braking, integrated steering activators and ...

Schmitt, Peter, S.M. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

16

Automatic Mechetronic Wheel Light Device  

DOE Patents [OSTI]

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

17

State Transition, Balancing, Station Keeping, and Yaw Control for a Dynamically Stable Single Spherical Wheel Mobile Robot  

E-Print Network [OSTI]

with a four-motor inverse mouse- ball drive, yaw drive, leg drive, control system, and results including present the results and conclusions. II. SYSTEM DESCRIPTION A. Four-Motor Inverse Mouse-Ball Drive Spherical Wheel Mobile Robot Umashankar Nagarajan, Anish Mampetta, George A. Kantor and Ralph L. Hollis

18

Design and Modeling of a Redundant Omni-directional RoboCup Goalie Lance Wilson, Craig Williams, Justin Yance, Jae Lew, Robert L. Williams II  

E-Print Network [OSTI]

developed for the Ohio University RoboCup goalie. The goalie robot is actuated redundantly with four wheels. Finally, a simulation demonstrates the inverse kinematics solution and simple independent PD wheel control-directional drive gives the goalie robot the ability to always face the ball while being able to move in any

Williams II, Robert L.

19

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study  

E-Print Network [OSTI]

Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study M. Zeraoulia1 Combustion Engine (ICE) and the electric motor to deliver power in parallel to drive the wheels. Since both the ICE and electric motor are generally coupled to the drive shaft of the wheels via two clutches

Paris-Sud XI, Université de

20

Wheel-type magnetic refrigerator  

DOE Patents [OSTI]

The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load. 7 figs.

Barclay, J.A.

1983-10-11T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Rim seal for turbine wheel  

DOE Patents [OSTI]

A turbine wheel assembly includes a disk having a plurality of blades therearound. A ceramic ring is mounted to the housing of the turbine wheel assembly. A labyrinth rim seal mounted on the disk cooperates with the ceramic ring to seal the hot gases acting on the blades from the disk. The ceramic ring permits a tighter clearance between the labyrinth rim seal and the ceramic ring.

Glezer, Boris (Del Mar, CA); Boyd, Gary L. (Alpine, CA); Norton, Paul F. (San Diego, CA)

1996-01-01T23:59:59.000Z

22

Aerodynamic Drag Reduction Apparatus For Wheeled Vehicles In Ground Effect  

DOE Patents [OSTI]

An apparatus for reducing the aerodynamic drag of a wheeled vehicle in a flowstream, the vehicle having a vehicle body and a wheel assembly supporting the vehicle body. The apparatus includes a baffle assembly adapted to be positioned upstream of the wheel assembly for deflecting airflow away from the wheel assembly so as to reduce the incident pressure on the wheel assembly.

Ortega, Jason M. (Pacifica, CA); Salari, Kambiz (Livermore, CA)

2005-12-13T23:59:59.000Z

23

Energy Upgrade California Drives Demand From Behind the Wheel | Department  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.Program -Department oftoTheseClick on the graphic to learn more the

24

Bradbury Science Museum - Science on Wheels  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Bradbury Science Museum - Science on Wheels Our Mission: To stimulate interest in and enthusiasm for science, technology, engineering and mathematics and promote public...

25

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular  

E-Print Network [OSTI]

CONVERVATION OF ANGULAR MOMENTUM A rotating bicycle wheel has angular momentum, which is a property of a bicycle wheel's mass is concentrated along the wheel's rim, rather than at the center, and this causes. The bicycle wheel, you, and the chair comprise a system that obeys the principle of conservation of angular

26

Qualifying Facility Wheeling Task Force-- Status Report  

E-Print Network [OSTI]

In early 1989, Central Power and Light Company received a request from the Coastal Corporation to wheel power from an affiliate (Coastal Refining) cogeneration facility to 28 remote installations owned by other affiliates. CPL then requested through...

Panjavan, S.

27

Traction drive automatic transmission for gas turbine engine driveline  

DOE Patents [OSTI]

A transaxle driveline for a wheeled vehicle has a high speed turbine engine and a torque splitting gearset that includes a traction drive unit and a torque converter on a common axis transversely arranged with respect to the longitudinal centerline of the vehicle. The drive wheels of the vehicle are mounted on a shaft parallel to the turbine shaft and carry a final drive gearset for driving the axle shafts. A second embodiment of the final drive gearing produces an overdrive ratio between the output of the first gearset and the axle shafts. A continuously variable range of speed ratios is produced by varying the position of the drive rollers of the traction unit. After starting the vehicle from rest, the transmission is set for operation in the high speed range by engaging a first lockup clutch that joins the torque converter impeller to the turbine for operation as a hydraulic coupling.

Carriere, Donald L. (Livonia, MI)

1984-01-01T23:59:59.000Z

28

Minimizing Wheel Slip in Railway Locomotives with Coupled Permanent Magnet Synchronous Motors  

E-Print Network [OSTI]

In this work I consider control strategies of permanent magnet synchronous motors in which the back-emf signal from the motor is used to achieve commutation of the six step driving circuit. I show that if the strategy is modified to connect multiple motors in a cyclic chain, then a collective synchronized state is favoured. The stability of this state can be exploited in the bogies of a railway locomotive to automatically terminate wheel slipping episodes.

Shayak Bhattacharjee

2015-01-17T23:59:59.000Z

29

Dynamics of a Mobile Robot with Three BallWheels  

E-Print Network [OSTI]

Dynamics of a Mobile Robot with Three Ball­Wheels February 17, 1999 Svetlana Ostrovskaya, Raymond J­ wheels. The resulting model turns out to be a Chaplygin system, which allows the dynamic equations connected to one roller of each wheel, and three more actuators con­ trolling the orientation of the ball

Spiteri, Raymond J.

30

Reconfigurable wheels : re-inventing the wheel for the next generation of planetary rovers  

E-Print Network [OSTI]

Experiences with Spirit and Opportunity, the twin Mars Exploration Rovers, showed that one of the major issues that needs to be addressed in order to expand the exploration capabilities of planetary rovers is that of wheel ...

Baker, Brittany, S.M. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

31

A magneto-electric quantum wheel  

E-Print Network [OSTI]

Here we show that self-propulsion in quantum vacuum may be achieved by rotating or aggregating magneto-electric nano-particles. The back-action follows from changes in momentum of electro-magnetic zero-point fluctuations, generated in magneto-electric materials. This effect may provide new tools for investigation of the quantum nature of our world. It might also serve in the future as a "quantum wheel" to correct satellite orientation in space.

Alexander Feigel

2009-12-05T23:59:59.000Z

32

Numerical Analysis of the Channel Wheel Fresh Air Ventilator Under Frosting Conditions  

E-Print Network [OSTI]

channel wheel heat exchanger under different ambient conditions using the model developed. These include frost formation on the surface of the channel wheel heat exchanger, and impacts on the operational performance of the channel wheel fresh air...

Gao, B.; Dong, Z.; Cheng, Z.; Luo, E.

2006-01-01T23:59:59.000Z

33

Simulation and optimization of a two-wheeled, ball- flinging robot  

E-Print Network [OSTI]

the ping-pong ball and the wheel respectively. Location of mc are the radius of the wheel and the ball. m, m b , and msure the ball is caught between the wheels and the body. See

Chen, Po-Ting

2010-01-01T23:59:59.000Z

34

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN  

E-Print Network [OSTI]

WHEELS: A CONVERSATIONAL SYSTEM IN THE AUTOMOBILE CLASSIFIEDS DOMAIN Helen Meng, Senis WHEELS is a conversational system which provides access to a database of eletronic automobile classified users to search through a database of 5,000 automobile classifieds. The current end-to-end system can re

35

The design process for wheel-robot integration  

E-Print Network [OSTI]

In this thesis, the design process for wheel-robot integration was documented and reflected on. The project focused on redesigned certain aspects a half-scale wheel-robot to be integrated with a half-scale CityCar prototype ...

Carvajal, Michael Angelo

2009-01-01T23:59:59.000Z

36

Characterization of grinding wheels: An annotated Bibliography. Final report  

SciTech Connect (OSTI)

The characteristics of grinding wheels, after both fabrication and periods of operation, have a significant effect on the processed surface and the mechanical properties of advanced ceramics. An extensive literature survey and review has been conducted to determine and catalogue the various characterization methods that have been investigated and reported. Although many of the references have addressed the grinding of metals, the historical and technical merit justify their inclusion in this bibliography. For convenience, the references have been subdivided into nine subheadings: Nondestructive examination; elasticity and stiffness; wheel hardness; topography and profilometry; observation of texture of wheel surfaces wheel wear; in process monitoring of grinding, acoustic emission, other; characteristics of ground surfaces; and miscellaneous.

McClung, R.W.

1995-12-01T23:59:59.000Z

37

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS  

E-Print Network [OSTI]

FULL FUEL CYCLE ASSESSMENT TANK TO WHEELS EMISSIONS AND ENERGY CONSUMPTION Prepared For: California to Tank, Criteria Pollutants, Multi-media impacts, EMFAC #12;#12;vii Table of Contents Acknowledgements

38

Paper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive  

E-Print Network [OSTI]

for the Center for Compact and Efficient Fluid Power at the University of Minnesota. The hydro-mechanical hybrid is leveraging the intrinsically high power density of the hydraulic energy storage system through optimal enginePaper Number Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel

Li, Perry Y.

39

Engineering AnteaterDrive  

E-Print Network [OSTI]

Rockw ell & M DEA Engineering Tower AnteaterDrive AnteaterDrive East Peltason Drive EastPeltasonDrive East Peltason Drive Anteater Parking Structure EngineeringServiceRoad Engineering Laboratory Facility Engineering Gateway Engineering Hall AIRB Calit2 Engineering Lecture Hall Campus Building Engineering Building

Mease, Kenneth D.

40

Design of an omnidirectional and holonomic wheeled platform prototype  

SciTech Connect (OSTI)

This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independent rotational and translational motion capabilities. We first describe the original orthogonal-wheels assembly'' on which these platforms are based and discuss how a combination of these assemblies is used to generate an omnidirectional capability. The design and control of a prototype platform developed to test and demonstrate the proposed concepts is then described, and experimental results illustrating the full omnidirectionality of the platform with decoupled rotational and translational degrees of freedom are presented. 15 refs., 9 figs.

Killough, S.M.; Pin, F.G.

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many  

E-Print Network [OSTI]

Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many potential and strength and meet all manufacturer specifications. Abrasive Wheel Machinery and Tools Safety Tip #1

Minnesota, University of

42

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric...

43

E-Print Network 3.0 - atlas big wheel Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wheel Search Powered by Explorit Topic List Advanced Search Sample search results for: atlas big wheel Page: << < 1 2 3 4 5 > >> 1 A Slip Model for the Spherical Actuation of the...

44

Well-to-Wheels Analysis of Advanced Fuel/Vehicle Systems - A...  

Energy Savers [EERE]

Well-to-Wheels Analysis of Advanced FuelVehicle Systems - A North American Study of Energy Use, Greenhouse Gas Emissions, and Criteria Pollutant Emissions Well-to-Wheels Analysis...

45

KINEMATIC CONTROL OF A NONHOLONOMIC WHEELED MOBILE MANIPULATOR A DIFFERENTIAL FLATNESS APPROACH  

E-Print Network [OSTI]

the terminal conditions in the flat output space while control design reduces to a pole-placement problem) electro-mechanical testing. NOMENCLATURE WMR Wheeled Mobile Robot WMM Wheeled Mobile Manipulator ( ),x y Cartesian coordinates of the center of the wheel axle of the WMR Orientation of the WMR with respect

Krovi, Venkat

46

Quasi-Static Analysis of a Leg-Wheel Hybrid Vehicle for Enhancing Stair Climbing Ability  

E-Print Network [OSTI]

Quasi-Static Analysis of a Leg-Wheel Hybrid Vehicle for Enhancing Stair Climbing Ability Pattaramon}@kmutt.ac.th stl@kmitnb.ac.th Abstract - This paper presents quasi-static analysis of a leg- wheel hybrid vehicle. Index Terms - Leg-Wheel hybrid vehicle, Stair climbing ability, Quasi-static analysis I. INTRODUCTION

Laksanacharoen, Sathaporn

47

Electric Power Controller for Steering Wheel Management in Electric Cars  

E-Print Network [OSTI]

Electric Power Controller for Steering Wheel Management in Electric Cars Vicente Milanés, Joshué-- Autonomous vehicles, Power control, System analysis and design, Intelligent transportation systems. I they are named hydraulic power steering (HPS) systems. If an electric motor is used then they are named electric

Paris-Sud XI, Université de

48

Hydrodynamic Tesla Wheel Flume for Model and Prototype Testing  

E-Print Network [OSTI]

The Tesla turbine, U.S. Patent 1,061,206 -- May 6, 1913 was invented by Nikola Tesla as a means to extractHydrodynamic Tesla Wheel Flume for Model and Prototype Testing Spencer Jenkins, Chris Scott, Jacob Engineering department at Florida Institute of Technology (Florida Tech) has developed a Hydrodynamic Tesla

Wood, Stephen L.

49

FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS,  

E-Print Network [OSTI]

FULL FUEL CYCLE ASSESSMENT WELL TO WHEELS ENERGY INPUTS, EMISSIONS, AND WATER IMPACTS Preparation for the AB 1007 (Pavley) Alternative Transportation Fuels Plan Proceeding Prepared For: California Energy, Project Manager Ray Tuvell, Manager EMERGING FUELS & TECHNOLOGY OFFICE Rosella Shapiro, Deputy Director

50

2 DOF Low Cost Platform for Driving Simulator: Modeling and Control Hichem Arioui, Salim Hima and Lamri Nehaoua  

E-Print Network [OSTI]

of the longitudinal and yaw movements. To enhance the drive immersion in the virtual world, a haptic feedback steering wheel will be implemented. The whole system is considered as a two coupled systems and linked mechanically. The first system consists in motorized rail for the longitudinal movement while the second system

Paris-Sud XI, Université de

51

Innovative grinding wheel design for cost-effective machining of advanced ceramics  

SciTech Connect (OSTI)

This Final Report covers the Phase II Innovative Grinding Wheel (IGW) program in which Norton Company successfully developed a novel grinding wheel for cost-effective cylindrical grinding of advanced ceramics. In 1995, Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics using small prototype wheels. The Phase II program was initiated to scale-up the new superabrasive wheel specification to larger diameters, 305-mm to 406-mm, required for most production grinding of cylindrical ceramic parts, and to perform in-house and independent validation grinding tests.

Licht, R.H.; Kuo, P.; Liu, S.; Murphy, D.; Picone, J.W.; Ramanath, S.

2000-05-01T23:59:59.000Z

52

By moving the front wheels in and back wheels out, the rover can  

E-Print Network [OSTI]

. Solar arrays Provide power for driving the rover, operating the science instruments, heating. The images provided the sci- entists with their first glimpse of their home away from home -- an area they will study for months. Scientists are thrilled with what they have seen. "Home sweet home," says Steve

Withers, Paul

53

Innovative grinding wheel design for cost-effective machining of advanced ceramics. Phase I, final report  

SciTech Connect (OSTI)

Norton Company successfully completed the 16-month Phase I technical effort to define requirements, design, develop, and evaluate a next-generation grinding wheel for cost-effective cylindrical grinding of advanced ceramics. This program was a cooperative effort involving three Norton groups representing a superabrasive grinding wheel manufacturer, a diamond film manufacturing division and a ceramic research center. The program was divided into two technical tasks, Task 1, Analysis of Required Grinding Wheel Characteristics, and Task 2, Design and Prototype Development. In Task 1 we performed a parallel path approach with Superabrasive metal-bond development and the higher technical risk, CVD diamond wheel development. For the Superabrasive approach, Task 1 included bond wear and strength tests to engineer bond-wear characteristics. This task culminated in a small-wheel screening test plunge grinding sialon disks. In Task 2, an improved Superabrasive metal-bond specification for low-cost machining of ceramics in external cylindrical grinding mode was identified. The experimental wheel successfully ground three types of advanced ceramics without the need for wheel dressing. The spindle power consumed by this wheel during test grinding of NC-520 sialon is as much as to 30% lower compared to a standard resin bonded wheel with 100 diamond concentration. The wheel wear with this improved metal bond was an order of magnitude lower than the resin-bonded wheel, which would significantly reduce ceramic grinding costs through fewer wheel changes for retruing and replacements. Evaluation of ceramic specimens from both Tasks 1 and 2 tests for all three ceramic materials did not show evidence of unusual grinding damage. The novel CVD-diamond-wheel approach was incorporated in this program as part of Task 1. The important factors affecting the grinding performance of diamond wheels made by CVD coating preforms were determined.

Licht, R.H.; Ramanath, S.; Simpson, M.; Lilley, E.

1996-02-01T23:59:59.000Z

54

US DRIVE Driving Research and Innovation for Vehicle Efficiency...  

Broader source: Energy.gov (indexed) [DOE]

Driving Research and Innovation for Vehicle Efficiency and Energy Sustainability Partnership Plan US DRIVE Driving Research and Innovation for Vehicle Efficiency and Energy...

55

Hydrogen Pathways: Cost, Well-to-Wheels Energy Use, and Emissions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Seven Hydrogen Production, Delivery, and Distribution Scenarios Hydrogen Pathways: Cost,...

56

ITS Technologies in Military Wheeled Tactical Vehicles: Status Quo and the Future  

SciTech Connect (OSTI)

The U.S. Army operates and maintains the largest trucking fleet in the United States. Its fleet consists of over 246,000 trucks, and it is responsible for buying and developing trucks for all branches of the armed forces. The Army's tactical wheeled vehicle fleet is the logistical backbone of the Army, and annually, the fleet logs about 823 million miles. The fleet consists of a number of types of vehicles. They include eight different families of trucks from the High Mobility Multi-Purpose Wheeled Vehicles to M900 series line haul tractors and special bodies. The average age of all the trucks within the Army fleet is 15 years, and very few have more than traditional driving instrumentation on-board. Over the past decade, the Department of Transportation's (DOT's) Intelligent Transportation Systems (ITS) Program has conducted research and deployment activities in a number of areas including in-vehicle systems, communication and telematics technologies. Many current model passenger vehicles have demonstrated the assimilation of these technologies to enhance safety and trip quality. Commercial vehicles are also demonstrating many new electronic devices that are assisting in making them safer and more efficient. Moreover, a plethora of new technologies are about to be introduced to drivers that promise greater safety, enhanced efficiency, congestion avoidance, fuel usage reduction, and enhanced trip quality. The U.S. Army has special needs with regard to fleet management, logistics, sustainability, reliability, survivability, and fuel consumption that goes beyond similar requirements within the private industry. In order to effectively apply emerging ITS technologies to the special needs of the U.S. Army, planning for the conduct of the Army's Vehicle Intelligence Program (AVIP) has now commenced. The AVIP will be focused on the conduct of research that: (1) will apply ITS technologies to the special needs of the Army, and (2) will conduct research for special needs wi th regard to vehicle control, driver assistance, integration of vehicle intelligence and robotic technologies, managing effectively the information flow to drivers, enhanced logistics capabilities and sustainability of the Army's fleet during battlefield conditions. This paper will highlight the special needs of the Army, briefly describe two programs, which are embracing ITS technologies to a limited extent, will outline the AVIP, and will provide some insight into future Army vehicle intelligence efforts.

Knee, H.E.

2001-07-02T23:59:59.000Z

57

Functional test procedure, Fifth Wheel: SS-R42351, Issue D  

SciTech Connect (OSTI)

This report describes the equipment required for initial assembly/maintenance and inspection/resetting of the Fifth Wheel system. It also gives a step-by-step procedure for initial assembly/maintenance inspection and procedures for resetting the system and Eager-Pac installation. The Fifth Wheel system is associated with a tractor-type vehicle used for materials handling.

NONE

1994-07-12T23:59:59.000Z

58

Flexible, Wide-Area Storage for Distributed Systems with WheelFS  

E-Print Network [OSTI]

WheelFS is a wide-area distributed storage system intended to help multi-site applications share data and gain fault tolerance. WheelFS takes the form of a distributed file system with a familiar POSIX interface. Its design ...

Stribling, Jeremy

59

Billiards Digest June, 2012 "VEPP Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES  

E-Print Network [OSTI]

Control and English." "Wagon wheel" drills are very useful to help you practice and develop cue ball (CB angle slightly for each ball. There is actually a system you can use to help decide where to placeBilliards Digest June, 2012 "VEPP ­ Part III: Wagon Wheel Drills" ILLUSTRATED PRINCIPLES David

Alciatore, David G.

60

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled Mobile Robot  

E-Print Network [OSTI]

Trajectory Planning and Control of an Underactuated Dynamically Stable Single Spherical Wheeled is a dynamically stable mobile robot that moves on a single spherical wheel and is capable of omni- directional movement. The ballbot is an underactuated system with nonholonomic dynamic constraints. The authors propose

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile  

E-Print Network [OSTI]

Modeling Dynamics and Exploring Control of a Single-Wheeled Dynamically Stable Mobile Robot. It actively balances and moves on a single wheel using closed loop feedback, making it dynamically stable it a good candidate for operating in human environments. Balancing on a ball allows Ballbot to be omni

62

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes. 7 figs.

Treu, C.A. Jr.

1999-08-31T23:59:59.000Z

63

Piezoelectric drive circuit  

DOE Patents [OSTI]

A piezoelectric motor drive circuit is provided which utilizes the piezoelectric elements as oscillators and a Meacham half-bridge approach to develop feedback from the motor ground circuit to produce a signal to drive amplifiers to power the motor. The circuit automatically compensates for shifts in harmonic frequency of the piezoelectric elements due to pressure and temperature changes.

Treu, Jr., Charles A. (Raymore, MO)

1999-08-31T23:59:59.000Z

64

Rotor bore and turbine rotor wheel/spacer heat exchange flow circuit  

DOE Patents [OSTI]

In a turbine having closed-circuit steam-cooling passages about the rim of the rotor during steady-state operation, compressor discharge air is supplied to the rotor bore for passage radially outwardly into the wheel space cavities between the wheels and spacers. Communicating slots and channels in the spacers and wheels at circumferentially spaced positions enable egress of the compressor discharge air into the hot gas flow path. At turbine startup, cooling air flows through the closed-circuit steam passages to cool the outer rim of the rotor while compressor discharge air pre-warms the wheels and spacers. At steady-state, cooling steam is supplied in the closed-circuit steam-cooling passages and compressor discharge air is supplied through the bore and into the wheel space cavities to cool the rotor.

Caruso, Philip M. (Selkirk, NY); Eldrid, Sacheverel Quentin (Saratoga Springs, NY); Ladhani, Azad A. (Niskayuna, NY); DeMania, Alan Richard (Niskayuna, NY); Palmer, Gene David (Clifton Park, NY); Wilson, Ian David (Clifton Park, NY); Rathbun, Lisa Shirley (Scotia, NY); Akin, Robert Craig (Schenectady, NY)

2002-01-01T23:59:59.000Z

65

Does Doctrine Drive Technology or Does Technology Drive Doctrine?  

E-Print Network [OSTI]

Brief No. 4 September 2010 Does Doctrine Drive Technology orDoes Technology Drive Doctrine? Dennis Blasko Summary Wthat emphasizes strategy over technology and may hold some

Blasko, Dennis

2010-01-01T23:59:59.000Z

66

Direct drive wind turbine  

DOE Patents [OSTI]

A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

2006-10-10T23:59:59.000Z

67

Direct drive wind turbine  

DOE Patents [OSTI]

A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

Bywaters, Garrett; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

2006-07-11T23:59:59.000Z

68

Direct drive wind turbine  

DOE Patents [OSTI]

A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

Bywaters, Garrett Lee; Danforth, William; Bevington, Christopher; Stowell, Jesse; Costin, Daniel

2006-09-19T23:59:59.000Z

69

Direct drive wind turbine  

DOE Patents [OSTI]

A wind turbine is provided that minimizes the size of the drive train and nacelle while maintaining the power electronics and transformer at the top of the tower. The turbine includes a direct drive generator having an integrated disk brake positioned radially inside the stator while minimizing the potential for contamination. The turbine further includes a means for mounting a transformer below the nacelle within the tower.

Bywaters, Garrett; Danforth, William; Bevington, Christopher; Jesse, Stowell; Costin, Daniel

2007-02-27T23:59:59.000Z

70

Automobile Driving and Aggressive Behavior  

E-Print Network [OSTI]

The accident prone automobile driver. American Journal ofAutomobile Driving And Aggressive Behavior Raymond W. Novacofor its content or use. Automobile Driving and Aggressive

Novaco, Raymond W.

1991-01-01T23:59:59.000Z

71

The Accident Externality from Driving  

E-Print Network [OSTI]

Sex-Divided Mile- age, Accident, and Insurance Cost DataMandic. 2003. “The Accident Externality from Driving. ”Insurance Res. Council. accident externality from driving

Edlin, Aaron S.; Karaca-Mandic, Pinar

2007-01-01T23:59:59.000Z

72

Electric-Drive Vehicle engineering  

E-Print Network [OSTI]

Electric-Drive Vehicle engineering COLLEGE of ENGINEERING Electric-drive engineers for 80 years t Home to nation's first electric-drive vehicle engineering program and alternative-credit EDGE Engineering Entrepreneur Certificate Program is a great addition to an electric-drive vehicle

Berdichevsky, Victor

73

Apparatus and methods for aligning holes through wheels and spacers and stacking the wheels and spacers to form a turbine rotor  

DOE Patents [OSTI]

A gas turbine rotor stacking fixture includes upstanding bolts for reception in aligned bolt holes in superposed aft disk, wheels and spacers and upstanding alignment rods received in openings of the disk, wheels and spacers during the rotor stacking assembly. The axially registering openings enable insertion of thin-walled tubes circumferentially about the rim of the rotor, with tight tolerances to the openings to provide supply and return steam for cooling buckets. The alignment rods have radial dimensions substantially less than their dimensions in a circumferential direction to allow for radial opening misalignment due to thermal expansion, tolerance stack-up and wheel-to-spacer mismatch due to rabbet mechanical growth. The circumferential dimension of the alignment rods affords tightly toleranced alignment of the openings through which the cooling tubes are installed.

Berry, Robert Randolph (Greenville, SC); Palmer, Gene David (Clifton Park, NY); Wilson, Ian David (Clifton Park, NY)

2000-01-01T23:59:59.000Z

74

Development of legged, wheeled, and hybrid rover mobility models to facilitate planetary surface exploration mission analysis  

E-Print Network [OSTI]

This work discusses the Mars Surface Exploration (MSE) tool and its adaptation to model rovers featuring legged, wheeled, and hybrid mobility. MSE is a MATLAB based systems engineering tool that is capable of rapidly ...

McCloskey, Scott H. (Scott Haddon)

2007-01-01T23:59:59.000Z

75

To appear in KI -Kunstliche Intelligenz, BottcherIT Verlag, 2006. Holonomic Control of a robot with an omni-  

E-Print Network [OSTI]

destination at the correct angle. Figure 1: Our omnidirectional wheel design (left) and four- wheeled robot the robot a speed (vx, vy), with respect to a cartesian coordinate system attached to the robot, each wheel the CAD design of the omnidirectional robot which we used at RoboCup 2004 in Lisbon [3]. In the next

Rojas, RaĂşl

76

Variable Frequency Pump Drives  

E-Print Network [OSTI]

-frequency electric motor drive. What is happenin9 with variable frequency driven pun,ps is a classical illustration that evolution in technical products takes place not only because of changes in the processes served by these products, or because of innovations...-pole 3550 rpm squirrel caqe induction motor became available in the early 1930s that high pressure pumps operating at that speed could be buil t. And now, in the 1980s, the development of the solid-state, variable frequency electric motor drive...

Karassik, I. J.; Petraccaro, L. L.; McGuire, J. T.

77

The design, construction, and control of a wheeled robot vehicle  

E-Print Network [OSTI]

. And finally, my thanks to nry parents for their love and support. TABLE OF CONTENTS CHAPTER Page I INTRODUCTION 1. 1 Mobile Robots 1. 2 Modularity 1. 3 Proposal 1. 4 Research Procedure H ELECTRIC VEHICLE 13 2. 1 Base 2. 2 Drive Unit, 2. 3 Processing... . A. l Program ROBOT A. 2 Program MOBILE A. 3 Subroutine SPEED A. 4 Subroutine STOP 63 65 69 74 APPENDIX B TECHNICAL DATA 76 B. 1 Computer Mode B. 2 Joystick Mode B. 3 Pinout for the Joystick Controller B. 4 Pinout for the Joystick B. 5...

Ekiriwang, Tevo

1986-01-01T23:59:59.000Z

78

Holiday Food Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC History PublicationsFood Drive Holiday Food

79

Holiday Gift Drive  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC History PublicationsFood Drive Holiday FoodGift

80

Optimal Power Flow Formulation in Market of Retail Wheeling Taiyou Yong, Student Member, IEEE Robert Lasseter, Fellow, IEEE  

E-Print Network [OSTI]

power plants, nuclear power plants etc and selling power to consumers. The suppliers have contractsOptimal Power Flow Formulation in Market of Retail Wheeling Taiyou Yong, Student Member, IEEE at Madison, Madison, Wisconsin, USA Abstract: Power system deregulation along with retail wheeling

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel Inverted Pendulum  

E-Print Network [OSTI]

A Dual Model-Free Control of Underactuated Mechanical Systems, Application to The Inertia Wheel underac- tuated mechanical system: the inertia wheel inverted pendulum. Numerical simulations as well: the ball and beam [9] (where the dynamics of the beam has not been taken into account) and the Planar

Paris-Sud XI, Université de

82

Electric Drive Vehicle Demonstration and Vehicle Infrastructure...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation Electric Drive Vehicle Demonstration and Vehicle Infrastructure Evaluation 2010 DOE Vehicle Technologies...

83

Next Generation Environmentally Friendly Driving Feedback Systems...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Environmentally Friendly Driving Feedback Systems Research and Development Next Generation Environmentally Friendly Driving Feedback Systems Research and Development 2012 DOE...

84

ION 2006, Fort Worth TX, 26-29 September 2006 1 GPS/INS/G Sensors/Yaw Rate Sensor/Wheel  

E-Print Network [OSTI]

of four integration strategies, namely a GPS/INS integrated system, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with two non- holonomic constraints, a GPS/INS/G sensors/Yaw rate sensor/Wheel speed/INS/G sensors/Yaw rate sensor/Wheel speed sensor system with the removal of the lateral constraint

Calgary, University of

85

Driving Demand | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

strategies, results achieved to date, and advice for other programs. Driving Demand for Home Energy Improvements. This guide, developed by the Lawrence Berkeley National...

86

Idaho National Laboratory Driving Directions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Area Attractions and Events Area Geography Area History Area Links Driving Directions Idaho Falls Attractions and Events INL History INL Today Research Park Sagebrush Steppe...

87

ENERGY-BASED LIMIT CYCLE COMPENSATION FOR DYNAMICALLY BALANCING WHEELED INVERTED PENDULUM MACHINES  

E-Print Network [OSTI]

ENERGY-BASED LIMIT CYCLE COMPENSATION FOR DYNAMICALLY BALANCING WHEELED INVERTED PENDULUM MACHINES are not well known. The effects of these non-linearities can be observed in the energy behavior of IP balancing. While in this paper we use an energy-based observer to detect and correct limit cycles while balancing

Dollar, Aaron M.

88

A FINITE ELEMENT APPROACH FOR SIMULATING THE QUENCHING OF LARGE ALUMINIUM COMPRESSOR WHEELS  

E-Print Network [OSTI]

stresses which result from high temperature gradients. This may influence successive machining steps due as shown in Figure 1. A wheel is made out of one massive billet and is quenched in hot water. A 3D-FE model is challenging due to a variety of reasons, such as requiring material data for large temperature range as well

89

Operations with the new FUSE observatory: three-axis control with one reaction wheel  

E-Print Network [OSTI]

control system, particularly those of gyroscopes and reaction wheels, have made science operations in all three axes. Jitter values of no more than ±1 arcsecond in pitch, ±10 arcsecond in yaw, and ±1-516-8503; fax 410-516-5494; http://fuse.pha.jhu.edu #12;The FUSE Attitude Control System (ACS) contains two sets

90

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J applications. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where and static force Jacobians; normal forces. JACOBIAN DES ROUES MECANUM DU PLATFORME DE MOTION ATLAS DANS LES

Hayes, John

91

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS  

E-Print Network [OSTI]

ATLAS MOTION PLATFORM MECANUM WHEEL JACOBIAN IN THE VELOCITY AND STATIC FORCE DOMAINS Jonathan J. Atlas is a six degree of freedom vehicle op- erating training simulator motion platform where orienting force Jacobians; normal forces. MATRICE JACOBIENNE DES ROUES MECANUM SIMULATOUR DE MOUVEMENT ATLAS DANS

Hayes, John

92

Cooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots  

E-Print Network [OSTI]

. I. INTRO With the growing importance of autonomous mobile robots in industrial and researchCooperation of Heterogeneous, Autonomous Robots: A Case Study of Humanoid and Wheeled Robots Jutta- ation of a strongly heterogeneous robot team, composed of a highly articulated humanoid robot

Stryk, Oskar von

93

Model-based analysis and simulation of regenerative heat wheel Zhuang Wu a  

E-Print Network [OSTI]

comfort and saving thermal energy [1]. It is often considered as one of the dominant elements of low energy residential buildings in cold winter regions [2]. Estimates show that as much as 70% of the energy The rotary regenerator (also called the heat wheel) is an important component of energy intensive sectors

Melnik, Roderick

94

Rediscovering the Wheel. Thermochemical Analysis of Energetics of the Aromatic Diazines  

E-Print Network [OSTI]

calorimetry and vapor pressure measurements. The gas and condensed phase enthalpies of formation of the parent not the case for diazabenzenes. The previous comprehensive experimental study of both the condensed and gasRediscovering the Wheel. Thermochemical Analysis of Energetics of the Aromatic Diazines Sergey P

Chickos, James S.

95

Overmodulation in Current Controlled Drives  

E-Print Network [OSTI]

220 Chapter 5 Overmodulation in Current Controlled Drives 5.1 Introduction The performance of voltage feedforward controlled constant V f PWM-VSI drives is insu cient for most industrial processes performance control methods. Electric traction, el- evators, textile machines, paper and plastic machines

Hava, Ahmet

96

Warp Drive With Zero Expansion  

E-Print Network [OSTI]

It is commonly believed that Alcubierre's warp drive works by contracting space in front of the warp bubble and expanding space behind it. We show that this expansion/contraction is but a marginal consequence of the choice made by Alcubierre, and explicitly construct a similar spacetime where no contraction/expansion occurs. Global and optical properties of warp drive spacetimes are also discussed.

Jose Natario

2002-03-13T23:59:59.000Z

97

Development of a Micro Drive-Under Tractor- Research and Application  

E-Print Network [OSTI]

Abstract—The in-plant transport of goods is increasingly becoming automated. All reasons that argue for automation result in a better cost effectiveness. An extended percentage of the load units are lightweight and small goods that often occur either as single parts or as several articles in multiple small load carriers. Modern logistics concepts demand an efficient transport and the delivery within the intended time. To reduce the covered distance a flexible adjustment of the load capacity to single or accumulated transport is beneficial so that the vehicle can carry the required amount of goods without being oversized. To fulfill these specifications the paper at hand presents the development and realization of a new type of Automated Guided Vehicle that is optimized for the transportation of small goods [1]. The construction is carried out as an omnidirectional drive-under tractor in compact dimensions. The main purpose of the vehicle is the automated towing of trailers. Additionally the transport of single small load carriers can be accomplished by using a lifting table. Therefore it is for the first possible time to use a towing and carrying vehicle with a variable load capacity. For the drive system Mecanum wheels are used to enable omnidirectional maneuverability. Index Terms—Automated Guided Vehicle, drive-under tractor, omnidirectional drive.

Lothar Schulze; Sebastian Behling; Stefan Buhrs

98

CLEAN HYDROGEN TECHNOLOGY FOR 3-WHEEL TRANSPORTATION IN INDIA  

SciTech Connect (OSTI)

Hydrogen is a clean burning, non-polluting transportation fuel. It is also a renewable energy carrier that can be produced from non-fossil fuel resources such as solar, wind and biomass. Utilizing hydrogen as an alternative fuel for vehicles will diversify the resources of energy, and reduce dependence on oil in the transportation sector. Additionally, clean burning hydrogen fuel will also alleviate air pollution that is a very severe problem in many parts of world, especially major metropolitan areas in developing countries, such as India and China. In our efforts to foster international collaborations in the research, development, and demonstration of hydrogen technologies, through a USAID/DOE cost-shared project, Energy Conversion Devices, Inc.,(www.ovonic.com) a leading materials and alternative energy company, in collaboration with Bajaj Auto Limited, India's largest three-wheeler taxi manufacturer, has successfully developed and demonstrated prototype hydrogen ICE three-wheelers in the United States and India. ECD's proprietary Ovonic solid-state hydrogen storage technology is utilized on-board to provide a means of compact, low pressure, and safe hydrogen fuel. These prototype hydrogen three-wheelers have demonstrated comparable performance to the original CNG version of the vehicle, achieving a driving range of 130 km. The hydrogen storage system capable of storing 1 kg hydrogen can be refilled to 80% of its capacity in about 15 minutes at a pressure of 300 psi. The prototype vehicles developed under this project have been showcased and made available for test rides to the public at exhibits such as the 16th NHA annual meeting in April 2005, Washington, DC, and the SIAM (Society of Indian Automotive Manufacturers) annual conference in August 2005, New Delhi, India. Passengers have included members of the automotive industry, founders of both ECD and Bajaj, members of the World Bank, the Indian Union Minister for Finance, the President of the Asia Development Bank, members of USAID, USDOE and many other individuals, all of whom have had praise for the vehicle and the technology. The progress made through this phase I work and the importance of hydrogen three-wheelers has also resulted in extensive press coverage by the news media around the world.

Krishna Sapru

2005-11-15T23:59:59.000Z

99

Integration of a testbed for examining the interaction of Mars rover wheels with a Mars soil simulant  

E-Print Network [OSTI]

Integration and experimental testing was performed on a testbed for examining the interaction of Mars rover wheels with a Mars soil simulant. The testbed included a horizontal carriage that had a encoder to measure the ...

Okafor, Chiedozie A. (Chiedozie Arinze)

2011-01-01T23:59:59.000Z

100

warned that the world was asleep at the wheel. Back then, only two countries had plans to test  

E-Print Network [OSTI]

warned that the world was asleep at the wheel. Back then, only two countries had plans to test in a hospital examin- ing room in Rochester, New York. Pressing a ball of cotton into the crook of her elbow

Cai, Long

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Optimal Three-Material Wheel Assemblage of Conducting and Elastic Composites  

E-Print Network [OSTI]

We describe a new type of three material microstructures which we call wheel assemblages, that correspond to extremal conductivity and extremal bulk modulus for a composite made of two materials and an ideal material. The exact lower bounds for effective conductivity and matching laminates was found in (Cherkaev, 2009) and for anisotropic composites, in (Cherkaev, Zhang, 2011). Here, we show different optimal structures that generalize the classical Hashin-Shtrikman coated spheres (circles). They consist of circular inclusions which contain a solid central circle (hub) and radial spikes in a surrounding annulus, and (for larger volume fractions of the best material) an annulus filled with it. The same wheel assemblages are optimal for the pair of dual problems of minimal conductivity (resistivity) of a composite made from two materials and an ideal conductor (insulator), in the problem of maximal effective bulk modulus of elastic composites made from two linear elastic material and void, and the dual minimum problem.

Andrej Cherkaev

2011-05-22T23:59:59.000Z

102

Adjustable Speed Drive Industrial Applications  

E-Print Network [OSTI]

Electric motors are significant users of electricity in the United States. Approximately 66 percent of the total electricity in the U.S. is used by electric motors. Electronic adjustable speed drives (ASDs) can save energy, lower maintenance cost...

Poole, J. N.

103

Direct drive field actuator motors  

DOE Patents [OSTI]

A positive-drive field actuator motor is described which includes a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 62 figs.

Grahn, A.R.

1998-03-10T23:59:59.000Z

104

Integrated Biogeochemical and Hydrologic Processes Driving Arsenic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biogeochemical and Hydrologic Processes Driving Arsenic Release from Shallow Sediments to Groundwaters of the Mekong Integrated Biogeochemical and Hydrologic Processes Driving...

105

Grand Challenge Portfolio: Driving Innovations in Industrial...  

Broader source: Energy.gov (indexed) [DOE]

Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January 2011 Grand Challenge Portfolio: Driving Innovations in Industrial Energy Efficiency, January...

106

Low backlash direct drive actuator  

DOE Patents [OSTI]

A low backlash direct drive actuator is described which comprises a motor such as a stepper motor having at least 200 steps per revolution; a two part hub assembly comprising a drive hub coaxially attached to the shaft of the motor and having a plurality of drive pins; a driven hub having a plurality of bores in one end thereof in alignment with the drive pins in the drive hub and a threaded shaft coaxially mounted in an opposite end of the driven hub; and a housing having a central bore therein into which are fitted the drive hub and driven hub, the housing having a motor mount on one end thereof to which is mounted the stepper motor, and a closed end portion with a threaded opening therein coaxial with the central bore in the housing and receiving therein the threaded shaft attached to the driven hub. Limit switches mounted to the housing cooperate with an enlarged lip on the driven hub to limit the lateral travel of the driven hub in the housing, which also acts to limit the lateral travel of the threaded shaft which functions as a lead screw. 10 figs.

Kuklo, T.C.

1994-10-25T23:59:59.000Z

107

Kepler White Paper: Asteroseismology of Solar-Like Oscillators in a 2-Wheel Mission  

E-Print Network [OSTI]

We comment on the potential for continuing asteroseismology of solar-type and red-giant stars in a 2-wheel Kepler Mission. Our main conclusion is that by targeting stars in the ecliptic it should be possible to perform high-quality asteroseismology, as long as favorable scenarios for 2-wheel pointing performance are met. Targeting the ecliptic would potentially facilitate unique science that was not possible in the nominal Mission, notably from the study of clusters that are significantly brighter than those in the Kepler field. Our conclusions are based on predictions of 2-wheel observations made by a space photometry simulator, with information provided by the Kepler Project used as input to describe the degraded pointing scenarios. We find that elevated levels of frequency-dependent noise, consistent with the above scenarios, would have a significant negative impact on our ability to continue asteroseismic studies of solar-like oscillators in the Kepler field. However, the situation may be much more optimi...

Chaplin, W J; Christensen-Dalsgaard, J; Gilliland, R L; Kawaler, S D; Basu, S; De Ridder, J; Huber, D; Arentoft, T; Schou, J; Garcia, R A; Metcalfe, T S; Brogaard, K; Campante, T L; Elsworth, Y; Miglio, A; Appourchaux, T; Bedding, T R; Hekker, S; Houdek, G; Karoff, C; Molenda-Zakowicz, J; Monteiro, M J P F G; Aguirre, V Silva; Stello, D; Ball, W; Beck, P G; Birch, A C; Buzasi, D L; Casagrande, L; Cellier, T; Corsaro, E; Creevey, O L; Davies, G R; Deheuvels, S; Dogan, G; Gizon, L; Grundahl, F; Guzik, J; Handberg, R; Jimenez, A; Kallinger, T; Lund, M N; Lundkvist, M; Mathis, S; Mathur, S; Mazumdar, A; Mosser, B; Neiner, C; Nielsen, M B; Palle, P L; Pinsonneault, M H; Salabert, D; Serenelli, A M; Shunker, H; White, T R

2013-01-01T23:59:59.000Z

108

Drive reconfiguration mechanism for tracked robotic vehicle  

DOE Patents [OSTI]

Drive reconfiguration apparatus for changing the configuration of a drive unit with respect to a vehicle body may comprise a guide system associated with the vehicle body and the drive unit which allows the drive unit to rotate about a center of rotation that is located at about a point where the drive unit contacts the surface being traversed. An actuator mounted to the vehicle body and connected to the drive unit rotates the drive unit about the center of rotation between a first position and a second position.

Willis, W. David (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

109

Anomalous-viscosity current drive  

DOE Patents [OSTI]

The present invention relates to a method and apparatus for maintaining a steady-state current for magnetically confining the plasma in a toroidal magnetic confinement device using anomalous viscosity current drive. A second aspect of this invention relates to an apparatus and method for the start-up of a magnetically confined toroidal plasma.

Stix, T.H.; Ono, M.

1986-04-25T23:59:59.000Z

110

Improved wastewater treatment at Wheeling-Pittsburgh Steel Corporations`s Steubenville East Coke Plant  

SciTech Connect (OSTI)

Wheeling-Pittsburgh Steel Corporation recently improved its wastewater treatment at it`s by-products coke plant. This has led to greatly improved effluent quality. Excess ammonia liquor, along with wastewater from the light oil recovery plant, desulfurization facility, and coal pile runoff, must be treated prior to being discharged into the Ohio River. This is accomplished using a biological wastewater treatment plant to remove 99.99% of the organic contaminants and ammonia. Biologically treated, clarified wastewater is now polished in the newly constructed tertiary treatment plant.

Goshe, A.J.; Nodianos, M.J. [Wheeling-Pittsburgh Steel Corp., Follansbee, WV (United States)

1995-12-01T23:59:59.000Z

111

The Wheels on the Bus Go Round and Round... | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe Sun and Its Energy (11 activities)The Wheels on

112

Low-cost multi-terrain autonomous vehicle for hostile environments  

SciTech Connect (OSTI)

This paper describes an innovative and unique autonomous vehicle being developed at the Lawrence Livermore National Laboratory (LLNL) for versatile use in hostile environments. Conventional vehicles used in decommissioning and decontaminating, police activity, and unmanned military operations typically are designed with four-wheels or track in contact with the environment. Although four-wheel and track vehicles work well, they are limited in negotiating saturated terrain, steep hills and soft soils. The Spiral Track Autonomous Robot (STAR) is a versatile and maneuverable multi-terrain mobile vehicle that uses the latest available computer technology and two Archimedes screws, in contact with the local environment to intelligently negotiate a hostile environment.

Perez, M. L., LLNL

1996-12-03T23:59:59.000Z

113

Fiber optic sensor system for detecting movement or position of a rotating wheel bearing  

DOE Patents [OSTI]

An improved fiber optic sensor system and integrated sensor bearing assembly for detecting movement or position of a rotating wheel bearing having a multi-pole tone ring which produces an alternating magnetic field indicative of movement and position of the rotating member. A magneto-optical material, such as a bismuth garnet iron (B.I.G.) crystal, having discrete magnetic domains is positioned in the vicinity of the tone ring so that the domains align themselves to the magnetic field generated by the tone ring. A single fiber optic cable, preferably single mode fiber, carries light generated by a source of light to the B.I.G. crystal. The light passes through the B.I.G. crystal and is refracted at domain boundaries in the crystal. The intensity of the refracted light is indicative of the amount of alignment of the domains and therefore the strength of the magnetic field. The refracted light is carried by the fiber optic cable to an optic receiver where the intensity is measured and an electrical signal is generated and sent to a controller indicating the frequency of the changes in light intensity and therefore the rotational speed of the rotating wheel bearing.

Veeser, Lynn R. (Los Alamos, NM); Rodriguez, Patrick J. (Santa Fe, NM); Forman, Peter R. (Los Alamos, NM); Monahan, Russell E. (Ann Arbor, MI); Adler, Jonathan M. (Ypsilanti, MI)

1997-01-01T23:59:59.000Z

114

IEEE Int'l Conf. on Robotics and Automation (ICRA), May 14-18, 2012 Planning in High-dimensional Shape Space for a Single-wheeled  

E-Print Network [OSTI]

on a single ball. Achieving desired motions in position space is a challenging task for such systems due mobile robot that moves on a single ball. The single, spherical wheel enables the robot to achieve omni-dimensional Shape Space for a Single-wheeled Balancing Mobile Robot with Arms Umashankar Nagarajan, Byungjun Kim

115

The warp drive and antigravity  

E-Print Network [OSTI]

The warp drive envisioned by Alcubierre that can move a spaceship faster than light can, with modification, levitate it as if it were lighter than light, even allow it to go below a black hole's horizon and return unscathed. Wormhole-like versions of the author's `drainhole' (1973) might provide the drive, in the form of a by-pass of the spaceship composed of a multitude of tiny topological tunnels. The by-pass would divert the gravitational `ether' into a sink covering part of the spaceship's hull, connected by the tunnels to a source covering the remainder of the hull, to produce an ether flow like that of a river that disappears underground only to spring forth at a point downstream. This diversion would effectively shield the spaceship from external gravity.

Homer G. Ellis

2004-11-19T23:59:59.000Z

116

Warp Drive: A New Approach  

E-Print Network [OSTI]

Certain classes of higher dimensional models suggest that the Casimir Effect is a candidate for the cosmological constant. In this paper we demonstrate that a sufficiently advanced civilization could, in principal, manipulate the radius of the extra dimension to locally adjust the value of the cosmological constant. This adjustment could be tuned to generate an expansion/contraction of spacetime around a spacecraft creating an exotic form of field-propulsion. Due to the fact that spacetime expansion itself is not restricted by relativity, a faster-than-light 'warp drive' could be created. Calculations of the energy requirements of such a drive are performed and an 'ultimate' speed limit, based on the Planckian limits on the size of the extra dimensions is found.

Richard Obousy; Gerald Cleaver

2008-02-08T23:59:59.000Z

117

Optimization of condensing gas drive  

E-Print Network [OSTI]

- cal, undersaturated reservoir with gas being injected into the crest and oil being produced from the base of the structure. Fractional oil re- covery at gas breakthrough proved to be less sensitive to changes in oil withdrawal rates as the gas... injection pressure was increased. The validity of the model was established by accurately simulating several low pressure gas drives conducted in the laboratory. Oil recoveries at gas breakthrough using the model compared closely with those recoveries...

Lofton, Larry Keith

1977-01-01T23:59:59.000Z

118

October Blood Drive Announcement | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

American Red Cross Blood Drive Scheduled for Oct. 31 The American Red Cross Blood Drive will take place Friday, October 31st from 10 a.m.-4 p.m. in CEBAF Center, Room F113. New and...

119

1009 SNOWHILL DRIVE CONWAY, SC 29526  

E-Print Network [OSTI]

Owner 1009 Snowhill Drive Conway, SC 29526 (843) 902-5182 blakel@clemson.edu 4. Agricultural activities

Duchowski, Andrew T.

120

Marketing & Driving Demand Collaborative - Social Media Tools...  

Energy Savers [EERE]

drivingdemandsocialmedia010611.pdf More Documents & Publications Marketing & Driving Demand: Social Media Tools & Strategies - January 16, 2011 Social Media for Natural...

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Static load testing of a heliostat drive  

SciTech Connect (OSTI)

The drive designed and built by the Solar Power Engineering Company (SPECO) for its large area heliostat failed under high wind loads during a winter storm. This report details the testing and analysis done to verify the load capabilities of the rebuilt heliostat drive. Changes in design and improvements in fabrication resulted in a usable drive. 12 figs., 7 tabs.

Grossman, J.W.

1991-10-01T23:59:59.000Z

122

Warp-drives, and other Weirdness  

E-Print Network [OSTI]

Wormholes, Warp-drives, and other Weirdness Matt Visser Physics Department Washington University. The fringes of general relativity almost seem to be infested with wormholes, warp-drives, and even time{Thorne traversable wormholes. Exotic matter (negative energy). Alcubierre's warp drive. Time machines. Temporal

Visser, Matt

123

Vehicle Technologies Office: US DRIVE Materials Technical Team...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

US DRIVE Materials Technical Team Roadmap Vehicle Technologies Office: US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) of the U.S. DRIVE Partnership...

124

Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments...  

Energy Savers [EERE]

Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments Report Vehicle Technologies Office: U.S. DRIVE 2014 Technical Accomplishments Report The U.S. DRIVE 2014...

125

Washboard Road: The Dynamics of Granular Ripples Formed by Rolling Wheels Nicolas Taberlet,1,2,* Stephen W. Morris,3  

E-Print Network [OSTI]

experiments on rippled granular surfaces formed under rolling wheels. Ripples appear above a critical speed surface under tangential stress is reminiscent of other sorts of wind- and water-driven ripples [2 rolled freely on the sand bed as the table rotated at a constant speed. No torque was applied

McElwaine, Jim

126

Well-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles  

E-Print Network [OSTI]

) Note: PSAT included after-treatment thermal efficiency penalty to the diesel fuel economy · CD ElectricWell-to-Wheels Energy Use and Greenhouse Gas Emissions of Plug-In Hybrid Electric Vehicles Amgad engine vehicles (ICEVs) Regular hybrid electric vehicles (HEVs) Plug-in hybrid electric vehicles (PHEVs

127

Abstract--This video submission presents the experimental validation and testing of a leg-wheel hybrid mobile robot  

E-Print Network [OSTI]

is installed inside the spoke and its power and control signal are passed through a connector pair, which have separate mechanisms of wheels and legs, this robot is implemented with a transformation mechanism inventions specialized in rolling on the flat ground, whose excellent performance of power efficiency

Lin, Pei-Chun

128

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal Desai, Brenden Keyes,  

E-Print Network [OSTI]

Good Wheel Hunting: UMass Lowell's Scavenger Hunt Robot System Robert Casey, Andrew Chanler, Munjal was built on top of the system we have been developing for urban search and rescue (USAR) research. The system includes new behaviors and behavior sequencing, vision algorithms and sensor processing algorithms

Yanco, Holly A.

129

February 7, 2009 "Friends come first, mathematics after." Raoul once said, as he smiled and wheeled his bicycle out  

E-Print Network [OSTI]

and wheeled his bicycle out of his office, and down the corridor to meet a visiting friend of his in a local coffee shop, his worn golden-brown portfolio balanced on his bicycle seat. Raoul Bott was a wonderful: as he smiled, made his way down a corridor, looked for his lost gloves, walked his bicycle

Mazur, Barry

130

Fluid cooled vehicle drive module  

DOE Patents [OSTI]

An electric vehicle drive includes a support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EM/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

2005-11-15T23:59:59.000Z

131

ARM - SGP Rural Driving Hazards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC :ProductsSCM Forcing Data DerivedInstrumentsPolarExtendedRural Driving Hazards

132

Traction Drive Systems Breakout Group  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyThe EnergyDepartment7 th ,Top Value AddedTotalTownTRACTION DRIVE

133

Drive5 | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The followingDirect EnergyOrganization ofVirginiaYou areDrive5

134

Design and control of multimodal single-legged vehicles with variable geometry reaction wheel arrays  

E-Print Network [OSTI]

of the Mitsubishi PA-10 robot arm harmonic drive system,”leg and arms stems directly from the design of the robot;Arm Suspension Mechanism for an Underactuated Single Legged Hopping Robot.

Schmidt-Wetekam, Christopher

2011-01-01T23:59:59.000Z

135

Biofuels development in Maine: Using trees to oil the wheels of sustainability -Maine news, sports, obituaries, weather -Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustain  

E-Print Network [OSTI]

Biofuels development in Maine: Using trees to oil the wheels of sustainability - Maine news, sports, obituaries, weather - Bangor Daily News http://bangordailynews.com/2013/03/12/opinion/biofuels-development-in-maine-using-trees-to-oil-the-wheels-of-sustainability/print/[3/13/2013 1:54:43 PM] Biofuels development

Thomas, Andrew

136

Microfabricated microengine for use as a mechanical drive and power source in the microdomain and fabrication process  

DOE Patents [OSTI]

A microengine uses two synchronized linear actuators as a power source and converts oscillatory motion from the actuators into rotational motion via direct linkage connection to an output gear or wheel. The microengine provides output in the form of a continuously rotating output gear that is capable of delivering drive torque to a micromechanism. The microengine can be operated at varying speeds and its motion can be reversed. Linear actuators are synchronized in order to provide linear oscillatory motion to the linkage means in the X and Y directions according to a desired position, rotational direction and speed of said mechanical output means. The output gear has gear teeth on its outer perimeter for directly contacting a micromechanism requiring mechanical power. The gear is retained by a retaining means which allows said gear to rotate freely. The microengine is microfabricated of polysilicon on one wafer using surface micromachining batch fabrication. 30 figs.

Garcia, E.J.; Sniegowski, J.J.

1997-05-20T23:59:59.000Z

137

Electric vehicle drive train with contactor protection  

DOE Patents [OSTI]

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor. 3 figures.

Konrad, C.E.; Benson, R.A.

1994-11-29T23:59:59.000Z

138

Electric vehicle drive train with contactor protection  

DOE Patents [OSTI]

A drive train for an electric vehicle includes a traction battery, a power drive circuit, a main contactor for connecting and disconnecting the traction battery and the power drive circuit, a voltage detector across contacts of the main contactor, and a controller for controlling the main contactor to prevent movement of its contacts to the closed position when the voltage across the contacts exceeds a predetermined threshold, to thereby protect the contacts of the contactor. The power drive circuit includes an electric traction motor and a DC-to-AC inverter with a capacitive input filter. The controller also inhibits the power drive circuit from driving the motor and thereby discharging the input capacitor if the contacts are inadvertently opened during motoring. A precharging contactor is controlled to charge the input filter capacitor prior to closing the main contactor to further protect the contacts of the main contactor.

Konrad, Charles E. (Roanoke, VA); Benson, Ralph A. (Roanoke, VA)

1994-01-01T23:59:59.000Z

139

Electric-Drive Vehicle Basics (Brochure)  

SciTech Connect (OSTI)

Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

Not Available

2011-04-01T23:59:59.000Z

140

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Meeting arravt034tiferdowsi2012o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Peer Evaluation arravt034tiferdowsi2011p.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

142

Advanced Electric Drive Vehicles ? A Comprehensive Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

-- Washington D.C. tiarravt034ferdowsi2010o.pdf More Documents & Publications Advanced Electric Drive Vehicles A Comprehensive Education, Training, and Outreach Program...

143

Advanced Electric Drive Vehicle Education Program  

Broader source: Energy.gov (indexed) [DOE]

Training Consortium (NAFTC), together with its partners, will develop an Advanced Electric Drive Vehicle Education Program that will help accelerate mass market introduction...

144

US DRIVE Highlights of Technical Accomplishments 2013  

Broader source: Energy.gov (indexed) [DOE]

for longer-lasting and more cost-effective electric drive vehicle batteries. National Renewable Energy Laboratory Advanced energy storage devices, such as lithium- based...

145

Fuel Economy: What Drives Consumer Choice?  

E-Print Network [OSTI]

Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

2007-01-01T23:59:59.000Z

146

Fuel Economy: What Drives Consumer Choice?  

E-Print Network [OSTI]

Car Buyers and Fuel Economy? ” Energy Policy, vol. 35, 2007.Fuel Economy: What Drives Consumer Choice? BY TOMyou think about fuel economy? ” Rather, we listened closely

Turrentine, Tom; Kurani, Kenneth S; Heffner, Reid R.

2008-01-01T23:59:59.000Z

147

DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

Not Available

2013-04-01T23:59:59.000Z

148

Eco-Driving: Drive Green, Save Green Part of the Clean Fuel Advanced Technology Project  

E-Print Network [OSTI]

Eco- Driving: Drive Green, Save Green Part of the Clean Fuel Advanced Technology Project Funded · Procedures: Identical vehicles deliver different economy depending on how they are used and cared;Eco-Driving Procedures 1. Vehicle Use/Treatment · Use A/C only over 40mpg · Remove excess weight 2

149

The role of the cant and lateral position of the steering wheel in the orientation of drivers to the location of the automotive pedals  

E-Print Network [OSTI]

examined the effects of three steering wheel cants and three steering wheel lateral positions on drivers' preferred automotive foot pedal locations and separation distances. The dependent variables were the preferred vertical and horizontal positions... in orienting the driver to the locations of the pedals and should be part of any design recommendations detailing the relationship between the driver and the foot pedals. ACKNOWLEDGEMENTS I would like to thank the chairman of my Advisory Committee, Dr...

Sherrod, M. G

1989-01-01T23:59:59.000Z

150

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE  

E-Print Network [OSTI]

OUTCOMES FROM THE FRENCH NATIONAL PROJECT DRIVE EXPERIMENTAL DATA FOR THE EVALUATION OF HYDROGEN with success a project called DRIVE to the National Research Agency. This project aims at providing procedures and technologies will provide only limited guidance for hydrogen-powered vehicles. That is because

Paris-Sud XI, Université de

151

Electric top drives gain wide industry acceptance  

SciTech Connect (OSTI)

Since its introduction, the top drive drilling system has gained acceptance as a productive and safe method for drilling oil and gas wells. Originally, the system was used mostly for offshore and higher cost land drilling, and it had to be installed as a permanent installation because of its enormous weight and size. Essentially, a top drive replaces the kelly and rotary table as the means of rotating drillpipe on oil, gas and geothermal rigs and is considered to be 15% to 40% more efficient than a kelly drive. Top drive systems allow the operator to drill and maintain directional orientation for triple stands and provide tripping efficiency because of the ability to ream and circulate with triple stands, to reduce the risk of stuck pipe or lost wells, and to improve well control and pipe handling safety. The paper describes electric top drives with DC motors, top drives with AC motors, top drives with permanent magnet motors, and top drives with permanent magnet brushless synchronous motors.

Riahi, M.L.

1998-05-01T23:59:59.000Z

152

Drilling of wells with top drive unit  

SciTech Connect (OSTI)

Well drilling apparatus including a top drive drilling assembly having a motor driven stem adapted to be attached to the upper end of a drill string and drive it during a drilling operation, a torque wrench carried by the top drive assembly and movable upwardly and downwardly therewith and operable to break a threated connection between the drill string and the stem, and an elevator carried by and suspended from the top drive assembly and adapted to engage a section of drill pipe beneath the torque wrench in suspending relation. The torque wrench and elevator are preferably retained against rotation with the rotary element which drives the drill string, but may be movable vertically relative to that rotary element and relative to one another in a manner actuating the apparatus between various different operating conditions.

Boyadjieff, G.I.

1984-05-22T23:59:59.000Z

153

1. INTRODUCTION State of the art pipe inspection devices are generally  

E-Print Network [OSTI]

1. INTRODUCTION State of the art pipe inspection devices are generally four wheeled, camera is trying to upset the stability of the tail of the carriage. These carriages are fed into a pipe on the carriage are a TV camera and lights which illu- minate the inside pipe wall. The signals from the TV camera

Bradbeer, Robin Sarah

154

The MARIE Autonomous Mobile Robot1. G.A. den Boer, G.D. van Albada, L.O. Hertzberger  

E-Print Network [OSTI]

are based on a Trekka3 vehicle for the disabled, an electrically powered four-wheeled vehicle. The vehicle is described. The vehicle has an automobile-like kinematics and is fitted with a control computer and ultra vehicles in a dynamically changing environment. The environments selected for demonstrating these systems

Amsterdam, Universiteit van

155

Vehicle System Dynamics, Vol. 26, No.4, October 1996, pp.301-320. Traction/Braking Force Distribution for Optimal Longitudinal  

E-Print Network [OSTI]

as the desired level of vehicle yaw motion, and the control system was designed to follow the yaw motion commandVehicle System Dynamics, Vol. 26, No.4, October 1996, pp.301-320. Traction/Braking Force in the past twenty years through the use of electronic devices. Four-wheel-steering (4WS) systems have been

Peng, Huei

156

DIPARTIMENTO DI INGEGNERIA  

E-Print Network [OSTI]

Control Techniques for a Hybrid Sport Motorcycle Reduction of the environmental impact of transportation systems is a world wide priority. Hybrid propulsion vehicles have proved to have a strong potential to this regard, and different four-wheels solutions have spread out in the market. Differently from cars

Schenato, Luca

157

Control rod drive hydraulic system  

DOE Patents [OSTI]

A hydraulic system for a control rod drive (CRD) includes a variable output-pressure CR pump operable in a charging mode for providing pressurized fluid at a charging pressure, and in a normal mode for providing the pressurized fluid at a purge pressure, less than the charging pressure. Charging and purge lines are disposed in parallel flow between the CRD pump and the CRD. A hydraulic control unit is disposed in flow communication in the charging line and includes a scram accumulator. An isolation valve is provided in the charging line between the CRD pump and the scram accumulator. A controller is operatively connected to the CRD pump and the isolation valve and is effective for opening the isolation valve and operating the CRD pump in a charging mode for charging the scram accumulator, and closing the isolation valve and operating the CRD pump in a normal mode for providing to the CRD through the purge line the pressurized fluid at a purge pressure lower than the charging pressure.

Ose, Richard A. (San Jose, CA)

1992-01-01T23:59:59.000Z

158

Risks of using AP locations discovered through war driving  

E-Print Network [OSTI]

Risks of using AP locations discovered through war driving Minkyong Kim, Jeffrey J. Fielding the actual locations are often unavailable, they use estimated locations from war driving estimated through war driving. War driving is the process of collecting Wi-Fi beacons by driving or walking

Kotz, David

159

Installation considerations for IGBT AC drives  

SciTech Connect (OSTI)

In the last four years, Adjustable Speed ac Drive (ASD) manufacturers have migrated from Bipolar Junction Transistor (BJT) semiconductors to Insulated Gate Bipolar Transistors (IGBTs) as the preferred Output switching device. The advantage of IGBTs over BJTs is that device rise and fall time switching capability is 5 - 10 times faster, resulting in lower device switching loss and a more efficient drive. However, for a similar motor cable length as the BJT drive, the faster output voltage risetime of the IGBT drive may increase the dielectric voltage stress on the motor and cable due to a phenomenon called reflected wave. Faster output dv/dt transitions of IGBT drives also increase the possibility for phenomenon such as increased Common Mode (CM) electrical noise, Electromagnetic Interference (EMI) problems and increased capacitive cable charging current problems. Also, recent experience suggests any Pulse Width Modulated (PWM) drive with a steep fronted output voltage wave form may increase motor shaft voltage and lead to a bearing current phenomenon known as fluting. This paper provides a basic understanding of these issues, as well as solutions, to insure a successful drive system installation.

Skibinski, G.L.

1997-06-01T23:59:59.000Z

160

Chapter 18: Variable Frequency Drive Evaluation Protocol  

SciTech Connect (OSTI)

An adjustable-speed drive (ASD) includes all devices that vary the speed of a rotating load, including those that vary the motor speed and linkage devices that allow constant motor speed while varying the load speed. The Variable Frequency Drive Evaluation Protocol presented here addresses evaluation issues for variable-frequency drives (VFDs) installed on commercial and industrial motor-driven centrifugal fans and pumps for which torque varies with speed. Constant torque load applications, such as those for positive displacement pumps, are not covered by this protocol. Other ASD devices, such as magnetic drive, eddy current drives, variable belt sheave drives, or direct current motor variable voltage drives, are also not addressed. The VFD is by far the most common type of ASD hardware. With VFD speed control on a centrifugal fan or pump motor, energy use follows the affinity laws, which state that the motor electricity demand is a cubic relationship to speed under ideal conditions. Therefore, if the motor runs at 75% speed, the motor demand will ideally be reduced to 42% of full load power; however, with other losses it is about 49% of full load power.

Romberger, J.

2014-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

A high-fidelity harmonic drive model.  

SciTech Connect (OSTI)

In this paper, a new model of the harmonic drive transmission is presented. The purpose of this work is to better understand the transmission hysteresis behavior while constructing a new type of comprehensive harmonic drive model. The four dominant aspects of harmonic drive behavior - nonlinear viscous friction, nonlinear stiffness, hysteresis, and kinematic error - are all included in the model. The harmonic drive is taken to be a black box, and a dynamometer is used to observe the input/output relations of the transmission. This phenomenological approach does not require any specific knowledge of the internal kinematics. In a novel application, the Maxwell resistive-capacitor hysteresis model is applied to the harmonic drive. In this model, sets of linear stiffness elements in series with Coulomb friction elements are arranged in parallel to capture the hysteresis behavior of the transmission. The causal hysteresis model is combined with nonlinear viscous friction and spectral kinematic error models to accurately represent the harmonic drive behavior. Empirical measurements are presented to quantify all four aspects of the transmission behavior. These measurements motivate the formulation of the complete model. Simulation results are then compared to additional measurements of the harmonic drive performance.

Preissner, C.; Royston, T. J.; Shu, D. (APS Engineering Support Division); ( MCS); (Univ. of Illinois)

2012-01-01T23:59:59.000Z

162

A causally connected superluminal Warp Drive spacetime  

E-Print Network [OSTI]

It will be shown that while horizons do not exist for warp drive spacetimes traveling at subluminal velocities horizons begin to develop when a warp drive spacetime reaches luminal velocities. However it will be shown that the control region of a warp drive ship lie within the portion of the warped region that is still causally connected to the ship even at superluminal velocities, therefore allowing a ship to slow to subluminal velocities. Further it is shown that the warped regions which are causally disconnected from a warp ship have no correlation to the ship velocity.

F. Loup; R. Held; D. Waite; E. Halerewicz, Jr.; M. Stabno; M. Kuntzman; R. Sims

2002-02-06T23:59:59.000Z

163

Wind turbine ring/shroud drive system  

DOE Patents [OSTI]

A wind turbine capable of driving multiple electric generators having a ring or shroud structure for reducing blade root bending moments, hub loads, blade fastener loads and pitch bearing loads. The shroud may further incorporate a ring gear for driving an electric generator. In one embodiment, the electric generator may be cantilevered from the nacelle such that the gear on the generator drive shaft is contacted by the ring gear of the shroud. The shroud also provides protection for the gearing and aids in preventing gear lubricant contamination.

Blakemore, Ralph W.

2005-10-04T23:59:59.000Z

164

Vision and Inertial Sensor Based Drive Trains Control  

E-Print Network [OSTI]

Inertial Sensor Based Drive Trains Control by Haifei Cheng AInertial Sensor Based Drive Trains Control c 2010 by HaifeiInertial Sensor Based Drive Trains Control by Haifei Cheng

Cheng, Haifei

2010-01-01T23:59:59.000Z

165

Image fusion for a nighttime driving display  

E-Print Network [OSTI]

An investigation into image fusion for a nighttime driving display application was performed. Most of the image fusion techniques being investigated in this application were developed for other purposes. When comparing the ...

Herrington, William Frederick

2005-01-01T23:59:59.000Z

166

Vehicle Technologies Office: Electric Drive Technologies  

Broader source: Energy.gov [DOE]

Advanced power electronics and electric motors (APEEM) that make up vehicles' electric drive system are essential to hybrid and plug-in electric vehicles. As such, improvements in these...

167

Ag Education Student 1234 Education Drive  

E-Print Network [OSTI]

Ag Education Student 1234 Education Drive Fort Collins, CO 80523 educationstudent@gmail.com~970-222-1234 Education Bachelors of Science in Agriculture Education (Teacher Licensure requirements met) Anticipated May

168

January Blood Drive Announcement | Jefferson Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Red Cross Blood Drive will take place Tuesday, January 27th from 10 a.m.-4 p.m. in CEBAF Center, Room F113. New and repeat donors are encouraged to attend. To schedule an...

169

Universal power transistor base drive control unit  

SciTech Connect (OSTI)

A saturation condition regulator system for a power transistor which achieves the regulation objectives of a Baker clamp but without dumping excess base drive current into the transistor output circuit. The base drive current of the transistor is sensed and used through an active feedback circuit to produce an error signal which modulates the base drive current through a linearly operating FET. The collector base voltage of the power transistor is independently monitored to develop a second error signal which is also used to regulate base drive current. The current-sensitive circuit operates as a limiter. In addition, a fail-safe timing circuit is disclosed which automatically resets to a turn OFF condition in the event the transistor does not turn ON within a predetermined time after the input signal transition.

Gale, Allan R. (Allen Park, MI); Gritter, David J. (Racine, WI)

1988-01-01T23:59:59.000Z

170

Fuel Economy: What Drives Consumer Choice?  

E-Print Network [OSTI]

S. Kurani, “Car Buyers and Fuel Economy? ” Energy Policy,Fuel Economy: What Drives Consumer Choice? BY TOMa car, do they think about fuel costs over time, are they

Turrentine, Tom; Kurani, Kenneth; Heffner, Rusty

2007-01-01T23:59:59.000Z

171

Newtonian limits of warp drive spacetimes  

E-Print Network [OSTI]

We find a class of warp drive spacetimes possessing Newtonian limits, which we then determine. The same method is used to compute Newtonian limits of the Schwarzschild solution and spatially flat Friedmann-Robertson-Walker cosmological models.

Jose Natario

2009-10-07T23:59:59.000Z

172

Safe Tractor Operation: Driving on Highways  

E-Print Network [OSTI]

About 50 tractor drivers are killed each year in collisions with other vehicles on public roads. Many of these accidents could be prevented. This publication describes the legal requirements for operating a tractor on public roads, safe driving...

Smith, David

2004-09-16T23:59:59.000Z

173

Consider Steam Turbine Drives for Rotating Equipment  

SciTech Connect (OSTI)

This revised ITP tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

174

Frequency modulation drive for a piezoelectric motor  

DOE Patents [OSTI]

A piezoelectric motor has peak performance at a specific frequency f.sub.1 that may vary over a range of frequencies. A drive system is disclosed for operating such a motor at peak performance without feedback. The drive system consists of the motor and an ac source connected to power the motor, the ac source repeatedly generating a frequency over a range from f.sub.1 -.DELTA.x to f.sub.1 +.DELTA.y.

Mittas, Anthony (Albuquerque, NM)

2001-01-01T23:59:59.000Z

175

Fundamental limitations on "warp drive" spacetimes  

E-Print Network [OSTI]

"Warp drive" spacetimes are useful as "gedanken-experiments" that force us to confront the foundations of general relativity, and among other things, to precisely formulate the notion of "superluminal" communication. We verify the non-perturbative violation of the classical energy conditions of the Alcubierre and Natario warp drive spacetimes and apply linearized gravity to the weak-field warp drive, testing the energy conditions to first and second order of the non-relativistic warp-bubble velocity. We are primarily interested in a secondary feature of the warp drive that has not previously been remarked upon, if it could be built, the warp drive would be an example of a "reaction-less drive". For both the Alcubierre and Natario warp drives we find that the occurrence of significant energy condition violations is not just a high-speed effect, but that the violations persist even at arbitrarily low speeds. An interesting feature of this construction is that it is now meaningful to place a finite mass spaceship at the center of the warp bubble, and compare the warp field energy with the mass-energy of the spaceship. There is no hope of doing this in Alcubierre's original version of the warp-field, since by definition the point in the center of the warp bubble moves on a geodesic and is "massless". That is, in Alcubierre's original formalism and in the Natario formalism the spaceship is always treated as a test particle, while in the linearized theory we can treat the spaceship as a finite mass object. For both the Alcubierre and Natario warp drives we find that even at low speeds the net (negative) energy stored in the warp fields must be a significant fraction of the mass of the spaceship.

Francisco S. N. Lobo; Matt Visser

2004-10-31T23:59:59.000Z

176

Semiclassical instability of dynamical warp drives  

E-Print Network [OSTI]

Warp drives are very interesting configurations in General Relativity: At least theoretically, they provide a way to travel at superluminal speeds, albeit at the cost of requiring exotic matter to exist as solutions of Einstein's equations. However, even if one succeeded in providing the necessary exotic matter to build them, it would still be necessary to check whether they would survive to the switching on of quantum effects. Semiclassical corrections to warp-drive geometries have been analyzed only for eternal warp-drive bubbles traveling at fixed superluminal speeds. Here, we investigate the more realistic case in which a superluminal warp drive is created out of an initially flat spacetime. First of all we analyze the causal structure of eternal and dynamical warp-drive spacetimes. Then we pass to the analysis of the renormalized stress-energy tensor (RSET) of a quantum field in these geometries. While the behavior of the RSET in these geometries has close similarities to that in the geometries associated with gravitational collapse, it shows dramatic differences too. On one side, an observer located at the center of a superluminal warp-drive bubble would generically experience a thermal flux of Hawking particles. On the other side, such Hawking flux will be generically extremely high if the exotic matter supporting the warp drive has its origin in a quantum field satisfying some form of Quantum Inequalities. Most of all, we find that the RSET will exponentially grow in time close to, and on, the front wall of the superluminal bubble. Consequently, one is led to conclude that the warp-drive geometries are unstable against semiclassical back-reaction.

Stefano Finazzi; Stefano Liberati; Carlos Barceló

2009-07-14T23:59:59.000Z

177

Direct-drive field actuator motors  

DOE Patents [OSTI]

A high-torque, low speed, positive-drive field actuator motor is disclosed including a stator carrying at least one field actuator which changes in dimension responsive to application of an energy field, and at least one drive shoe movable by the dimensional changes of the field actuator to contact and move a rotor element with respect to the stator. Various embodiments of the motor are disclosed, and the rotor element may be moved linearly or arcuately. 37 figs.

Grahn, A.R.

1995-07-11T23:59:59.000Z

178

Study of the Reliability Enhancement of Wind Turbines Employing Direct-drive Technology.  

E-Print Network [OSTI]

??In traditional wind turbines employing gearboxes, the blades spin a shaft that is connected through a gearbox to the generator. The multiple wheels and bearings… (more)

Sara George, Reeba

2012-01-01T23:59:59.000Z

179

Direct - drive permanent magnet synchronous generator design for hydrokinetic energy extraction .  

E-Print Network [OSTI]

??"Hydrokinetic turbines deliver lower shaft speeds when compared to both steam and wind turbines. Hence, a water wheel generator must operate at speeds as low… (more)

Kashyap, Amshumaan Raghunatha

2013-01-01T23:59:59.000Z

180

Energy Department Invests to Drive Down Costs of Carbon Capture...  

Energy Savers [EERE]

Invests to Drive Down Costs of Carbon Capture, Support Reductions in Greenhouse Gas Pollution Energy Department Invests to Drive Down Costs of Carbon Capture, Support Reductions...

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

High-Temperature, Air-Cooled Traction Drive Inverter Packaging...  

Broader source: Energy.gov (indexed) [DOE]

High-Temperature, Air-Cooled Traction Drive Inverter Packaging High-Temperature, Air-Cooled Traction Drive Inverter Packaging 2010 DOE Vehicle Technologies and Hydrogen Programs...

182

EV Everywhere EV Everywhere Grand Challenge - Electric Drive...  

Broader source: Energy.gov (indexed) [DOE]

EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop Agenda EV Everywhere EV Everywhere Grand Challenge - Electric Drive (Power...

183

EV Everywhere Grand Challenge - Electric Drive (Power Electronics...  

Broader source: Energy.gov (indexed) [DOE]

- Electric Drive (Power Electronics and Electric Machines) Workshop EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop List of...

184

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2012 DOE Hydrogen and Fuel Cells Program and...

185

EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere...

186

Electric Drive Component Manufacturing: Magna E-Car Systems of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Peer Evaluation arravt027apethomas2011p.pdf More Documents & Publications Electric Drive Component Manufacturing: Magna E-Car Systems of America, Inc. Electric Drive...

187

Center for Electric Drive Transportation at the University of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Electric Drive Transportation at the University of Michigan - Dearborn Center for Electric Drive Transportation at the University of Michigan - Dearborn 2012 DOE Hydrogen and Fuel...

188

Electric Drive and Advanced Battery and Components Testbed (EDAB...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Review and Peer Evaluation vss033carlson2011o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Electric Drive and Advanced...

189

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles...  

Broader source: Energy.gov (indexed) [DOE]

High-Voltage Solid Polymer Batteries for Electric Drive Vehicles High-Voltage Solid Polymer Batteries for Electric Drive Vehicles 2013 DOE Hydrogen and Fuel Cells Program and...

190

Improving Motor and Drive System Performance - A Sourcebook for...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

motors and drives, as well as resources for additional information, tools, software, videos, and training opportunities. Improving Motor and Drive System Performance - A...

191

Computer-Aided Engineering for Electric Drive Vehicle Batteries...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) 2011 DOE Hydrogen and Fuel Cells...

192

Utilizing the Traction Drive Power Electronics System to Provide...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability for PHEVs Utilizing the Traction Drive Power Electronics System to Provide Plug-in Capability...

193

"It's Like Giving Us a Car, Only Without the Wheels": Performance of Latina Students at an Early College High School  

E-Print Network [OSTI]

School. (December 2011) Leslie Ann Locke, B.S.; M.L.S, University of Minnesota?Twin Cities Chair of Advisory Committee: Dr. Kathryn McKenzie This dissertation presents the results from an empirical study of the perspectives of Latina students who... ?IT?S LIKE GIVING US A CAR, ONLY WITHOUT THE WHEELS?: PERFORMANCE OF LATINA STUDENTS AT AN EARLY COLLEGE HIGH SCHOOL A Dissertation by LESLIE ANN LOCKE Submitted to the Office of Graduate Studies of Texas A&M University...

Locke, Leslie Ann

2012-02-14T23:59:59.000Z

194

Semiclassical instability of dynamical warp drives  

E-Print Network [OSTI]

Warp drives are very interesting configurations in General Relativity: At least theoretically, they provide a way to travel at superluminal speeds, albeit at the cost of requiring exotic matter to exist as solutions of Einstein's equations. However, even if one succeeded in providing the necessary exotic matter to build them, it would still be necessary to check whether they would survive to the switching on of quantum effects. Semiclassical corrections to warp-drive geometries have been analyzed only for eternal warp-drive bubbles traveling at fixed superluminal speeds. Here, we investigate the more realistic case in which a superluminal warp drive is created out of an initially flat spacetime. First of all we analyze the causal structure of eternal and dynamical warp-drive spacetimes. Then we pass to the analysis of the renormalized stress-energy tensor (RSET) of a quantum field in these geometries. While the behavior of the RSET in these geometries has close similarities to that in the geometries associate...

Finazzi, Stefano; Barceló, Carlos

2009-01-01T23:59:59.000Z

195

THE WARP DRIVE AND ANTIGRAVITY Homer G. Ellis  

E-Print Network [OSTI]

THE WARP DRIVE AND ANTIGRAVITY Homer G. Ellis Abstract. The warp drive envisioned by Alcubierre that dis- tortion, however it might be designed, would #12;t well the picturesque name `warp drive' familiar from science #12;ction. In this paper I shall show that such a warp drive can be made to serve

Ellis, Homer

196

Linearized warp drive and the energy conditions  

E-Print Network [OSTI]

''Warp drive'' spacetimes are useful as ''gedanken-experiments'' and as a theoretician's probe of the foundations of general relativity. Applying linearized gravity to the weak-field warp drive, i.e., for non-relativistic warp-bubble velocities, we find that the occurrence of energy condition violations in this class of spacetimes is generic to the form of the geometry under consideration and is not simply a side-effect of the ''superluminal'' properties. Using the linearized construction it is now possible to compare the warp field energy with the mass-energy of the spaceship, and applying the ''volume integral quantifier'', extremely stringent conditions on the warp drive spacetime are found.

Francisco S. N. Lobo; Matt Visser

2004-12-14T23:59:59.000Z

197

The unphysical nature of "Warp Drive"  

E-Print Network [OSTI]

We will apply the quantum inequality type restrictions to Alcubierre's warp drive metric on a scale in which a local region of spacetime can be considered ``flat''. These are inequalities that restrict the magnitude and extent of the negative energy which is needed to form the warp drive metric. From this we are able to place limits on the parameters of the ``Warp Bubble''. It will be shown that the bubble wall thickness is on the order of only a few hundred Planck lengths. Then we will show that the total integrated energy density needed to maintain the warp metric with such thin walls is physically unattainable.

Michael J. Pfenning; L. H. Ford

2001-03-15T23:59:59.000Z

198

The unphysical nature of "Warp Drive"  

E-Print Network [OSTI]

We will apply the quantum inequality type restrictions to Alcubierre's warp drive metric on a scale in which a local region of spacetime can be considered ``flat''. These are inequalities that restrict the magnitude and extent of the negative energy which is needed to form the warp drive metric. From this we are able to place limits on the parameters of the ``Warp Bubble''. It will be shown that the bubble wall thickness is on the order of only a few hundred Planck lengths. Then we will show that the total integrated energy density needed to maintain the warp metric with such thin walls is physically unattainable.

Pfenning, M J; Pfenning, Michael J.

1997-01-01T23:59:59.000Z

199

E-Print Network 3.0 - adjustable electric drives Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

drives Search Powered by Explorit Topic List Advanced Search Sample search results for: adjustable electric drives...

200

Risk Management 1851 N. Research Drive  

E-Print Network [OSTI]

-372-3135 Bowling Green State University Motor Vehicle Record Statement University policy requires that all driversRisk Management 1851 N. Research Drive Bowling Green, OH 43403 419-372-2127 Fax 419 acknowledge that the university endorses all applicable state motor vehicle regulations relating to driver

Moore, Paul A.

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Operating Instructions CASSEHE PUMP DRIVE UNIT  

E-Print Network [OSTI]

4 · Operating Instructions CASSEHE® PUMP DRIVE UNIT Catalog No. 72-510-000 72-510-220 PUMPING The squeezing action of rollers on tubing causes the peristaltic pumping action. The flow is proportionate to the speied of the rollers and the inside diameter of the tubing, both of which can be varied. Pumping

Kleinfeld, David

202

Driving EHOs in NSTX Rob Goldston  

E-Print Network [OSTI]

Driving EHOs in NSTX Rob Goldston September 8, 2010 #12;Houston, We have a Problem · Lithium rises. · This is not good, but it is not because the lithium is not pumping deuterium. · In the absence in most respects to RWM interactions - but in rotating frame. · Being examined by J-K Park and A. Boozer

Princeton Plasma Physics Laboratory

203

Safety Considerations When Driving on Rural Roads  

E-Print Network [OSTI]

procedures to follow. Characteristics of rural or forest roads Extra caution is required when driving-moving vehicles, animals, debris) · Unusually steep hills or sharp curves Since help may often be difficult.Agricultural or prescribed forest burning may produce smoke on roads. Hazard: Approaching vehicles, livestock or wild animals

Vivoni, Enrique R.

204

Recent Transitions in Ethiopian Homegarden Agroforestry: Driving  

E-Print Network [OSTI]

of the system dynamics shows that all underlying driving forces interact with each other and cause change, shrinking farm size, poverty and a new market situation and has gradually been changing towards monoculture production of khat (Catha edulis) and eucalyptus species. The consequence of the transitions on ecology

205

QER- Comment of Electric Drive Transportation Association  

Broader source: Energy.gov [DOE]

Please find attached the comments of the Electric Drive Transportation Association regarding the first volume of the Department of Energy’s QER. If you have questions about our submittal or require further information, please contact me using the information provided below. Thank you for the opportunity to comment. Genevieve Cullen

206

SYNTHETIC LUBRICANTS, INC 1411 Callaghan Drive  

E-Print Network [OSTI]

1 SYNTHETIC LUBRICANTS, INC 1411 Callaghan Drive Greenville, MI 48838 MATERIAL SAFETY DATA SHEET irritating and potentially toxic fumes containing oxides of nitrogen if exposed to extreme heat in air: (Conditions to Avoid) Stable under normal use conditions and in final use concentration. Incompatibility

Rollins, Andrew M.

207

SYNTHETIC LUBRICANTS, INC 1411 Callaghan Drive  

E-Print Network [OSTI]

1 SYNTHETIC LUBRICANTS, INC 1411 Callaghan Drive Greenville, MI 48838 MATERIAL SAFETY DATA SHEET. It will produce irritating and potentially toxic fumes containing oxides of nitrogen if exposed to extreme heat: (Conditions to Avoid) Stable under normal use conditions and in final use concentration. Incompatibility

Rollins, Andrew M.

208

The making of driving cultures Jane Moeckli  

E-Print Network [OSTI]

and traffic safety as effects of culture. In order to understand culture's role in shaping driving behavior of culture. We argue that how the traffic safety community defines culture dictates courses of action taken traffic safety. It is our hope that these suggestions will expand the definition of culture to better

Lee, John D.

209

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify thetorque commands applied to the motor.

Slicker, James M. (Union Lake, MI); Sereshteh, Ahmad (Union Lake, MI)

1988-01-01T23:59:59.000Z

210

Oscillation control system for electric motor drive  

DOE Patents [OSTI]

A feedback system for controlling mechanical oscillations in the torsionally complaint drive train of an electric or other vehicle. Motor speed is converted in a processor to estimate state signals in which a plant model which are used to electronically modify the torque commands applied to the motor. 5 figs.

Slicker, J.M.; Sereshteh, A.

1988-08-30T23:59:59.000Z

211

Well-to-wheels analysis of fast pyrolysis pathways with the GREET model.  

SciTech Connect (OSTI)

The pyrolysis of biomass can help produce liquid transportation fuels with properties similar to those of petroleum gasoline and diesel fuel. Argonne National Laboratory conducted a life-cycle (i.e., well-to-wheels [WTW]) analysis of various pyrolysis pathways by expanding and employing the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. The WTW energy use and greenhouse gas (GHG) emissions from the pyrolysis pathways were compared with those from the baseline petroleum gasoline and diesel pathways. Various pyrolysis pathway scenarios with a wide variety of possible hydrogen sources, liquid fuel yields, and co-product application and treatment methods were considered. At one extreme, when hydrogen is produced from natural gas and when bio-char is used for process energy needs, the pyrolysis-based liquid fuel yield is high (32% of the dry mass of biomass input). The reductions in WTW fossil energy use and GHG emissions relative to those that occur when baseline petroleum fuels are used, however, is modest, at 50% and 51%, respectively, on a per unit of fuel energy basis. At the other extreme, when hydrogen is produced internally via reforming of pyrolysis oil and when bio-char is sequestered in soil applications, the pyrolysis-based liquid fuel yield is low (15% of the dry mass of biomass input), but the reductions in WTW fossil energy use and GHG emissions are large, at 79% and 96%, respectively, relative to those that occur when baseline petroleum fuels are used. The petroleum energy use in all scenarios was restricted to biomass collection and transportation activities, which resulted in a reduction in WTW petroleum energy use of 92-95% relative to that found when baseline petroleum fuels are used. Internal hydrogen production (i.e., via reforming of pyrolysis oil) significantly reduces fossil fuel use and GHG emissions because the hydrogen from fuel gas or pyrolysis oil (renewable sources) displaces that from fossil fuel natural gas and the amount of fossil natural gas used for hydrogen production is reduced; however, internal hydrogen production also reduces the potential petroleum energy savings (per unit of biomass input basis) because the fuel yield declines dramatically. Typically, a process that has a greater liquid fuel yield results in larger petroleum savings per unit of biomass input but a smaller reduction in life-cycle GHG emissions. Sequestration of the large amount of bio-char co-product (e.g., in soil applications) provides a significant carbon dioxide credit, while electricity generation from bio-char combustion provides a large energy credit. The WTW energy and GHG emissions benefits observed when a pyrolysis oil refinery was integrated with a pyrolysis reactor were small when compared with those that occur when pyrolysis oil is distributed to a distant refinery, since the activities associated with transporting the oil between the pyrolysis reactors and refineries have a smaller energy and emissions footprint than do other activities in the pyrolysis pathway.

Han, J.; Elgowainy, A.; Palou-Rivera, I.; Dunn, J.B.; Wang, M.Q. (Energy Systems)

2011-12-01T23:59:59.000Z

212

Drive piston assembly for a valve actuator assembly  

DOE Patents [OSTI]

A drive piston assembly is provided that is operable to selectively open a poppet valve. The drive piston assembly includes a cartridge defining a generally stepped bore. A drive piston is movable within the generally stepped bore and a boost sleeve is coaxially disposed with respect to the drive piston. A main fluid chamber is at least partially defined by the generally stepped bore, drive piston, and boost sleeve. First and second feedback chambers are at least partially defined by the drive piston and each are disposed at opposite ends of the drive piston. At least one of the drive piston and the boost sleeve is sufficiently configured to move within the generally stepped bore in response to fluid pressure within the main fluid chamber to selectively open the poppet valve. A valve actuator assembly and engine are also provided incorporating the disclosed drive piston assembly.

Sun, Zongxuan (Troy, MI)

2010-02-23T23:59:59.000Z

213

Well-to-Wheel Energy, Emissions, and Cost Analysis of Electricity and Fuel Used in Conventional and Electrified Vehicles, and Their Connection to a Sustainable Energy Infrastructure  

E-Print Network [OSTI]

produced in creating the electricity through a full Life Cycle Analysis. As a result, proper comparison of electrified and conventional vehicles must include a complete Well-to-Wheel (WtW) study including the emissions generated through production and use...

Strecker, Bryan Anthony

2012-12-31T23:59:59.000Z

214

How to Properly Secure Your Bicycle Make sure the U-lock passes through the center of the frame as well as both wheels!  

E-Print Network [OSTI]

How to Properly Secure Your Bicycle Make sure the U-lock passes through the center of the frame as well as both wheels! Improperly Securing & Locking Your Bicycle Makes It an Easy Target for Thieves and seats Most thefts of bicycles occur because the lock being used is either a cable lock

Blanchette, Robert A.

215

Predictions of fast wave heating, current drive, and current drive antenna arrays for advanced tokamaks  

SciTech Connect (OSTI)

The objective of the advanced tokamak program is to optimize plasma performance leading to a compact tokamak reactor through active, steady state control of the current profile using non-inductive current drive and profile control. To achieve these objectives requires compatibility and flexibility in the use of available heating and current drive systems--ion cyclotron radio frequency (ICRF), neutral beams, and lower hybrid. For any advanced tokamak, the following are important challenges to effective use of fast waves in various roles of direct electron heating, minority ion heating, and current drive: (1) to employ the heating and current drive systems to give self-consistent pressure and current profiles leading to the desired advanced tokamak operating modes; (2) to minimize absorption of the fast waves by parasitic resonances, which limit current drive; (3) to optimize and control the spectrum of fast waves launched by the antenna array for the required mix of simultaneous heating and current drive. The authors have addressed these issues using theoretical and computational tools developed at a number of institutions by benchmarking the computations against available experimental data and applying them to the specific case of TPX.

Batchelor, D.B.; Baity, F.W.; Carter, M.D. [and others

1994-12-31T23:59:59.000Z

216

Adjustable speed drive for residential applications  

SciTech Connect (OSTI)

This paper describes a demonstration of an adjustable speed drive suitable for use in residential applications such as compressors and fans in heat pumps, air conditioners, and refrigerators. The adjustable speed drive uses only a four-diode rectifier and a six-transistor six-diode inverter and does not require a source-frequency filter inductor or capacitor. Motor speed is adjusted with source-frequency phase control eliminating the switching loss and electromagnetic interference caused by the more commonly used high-frequency pulse-width modulation. Low source-current distortion and high power factor are obtained at a full-load operating point which is found using a parametric analysis.

Jungreis, A.M.; Kelley, A.W. [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering] [North Carolina State Univ., Raleigh, NC (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

217

Integrated Inverter For Driving Multiple Electric Machines  

DOE Patents [OSTI]

An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

2006-04-04T23:59:59.000Z

218

Driving Energy Performance with Energy Management Teams  

E-Print Network [OSTI]

Driving Energy Performance with Energy Management Teams Meredith Younghein ENERGY STAR Industrial Communications Mgr. U.S. Environmental Protection Agency Washington, DC ABSTRACT Companies today face an uncertain energy future. Businesses... face escalating energy prices which can erode profits. Concerns over supply reliability, and possible regulation of carbon emissions create risk. For many industries in the U.S., energy costs are equal to the cost of raw materials or even employee...

Younghein, M.; Tunnessen, W.

2006-01-01T23:59:59.000Z

219

Heating and current drive systems for TPX  

SciTech Connect (OSTI)

The heating and current drive (H and CD) system proposed for the TPX tokamak will consist of ion cyclotron, neutral beam, and lower hybrid systems. It will have 17.5 MW of installed H and CD power initially, and can be upgraded to 45 MW. It will be used to explore advanced confinement and fully current-driven plasma regimes with pulse lengths of up to 1,000 s.

Swain, D.; Goranson, P. [Oak Ridge National Lab., TN (United States); Halle, A. von; Bernabei, S.; Greenough, N. [Princeton Univ., NJ (United States). Plasma Physics Lab.

1994-05-24T23:59:59.000Z

220

Cone Drive Operations Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentratingRenewable Solutions LLC Jump to: navigation,AreaHigh School Wind ProjectCone Drive

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy Department Announces New Prize Challenge to Drive Down...  

Broader source: Energy.gov (indexed) [DOE]

Energy Department Announces New Prize Challenge to Drive Down Solar Costs Energy Department Announces New Prize Challenge to Drive Down Solar Costs May 20, 2014 - 12:07pm Addthis...

222

Economical Aspects of Adjustable Speed Drives in Pumping Systems  

E-Print Network [OSTI]

Speed variations of pumps have become increasingly popular as the technology to produce variable frequency drives has progressed. Variable speed drives have many advantages compared to throttle valves when it comes to regulation of flow. They offer...

Hovstadius, G.

223

Workplace Plug-in Electric Vehicle Ride and Drive  

Broader source: Energy.gov [DOE]

Workplace plug-in electric vehicle (PEV) Ride and Drive events are one of the most effective ways to drive PEV adoption. By providing staff the opportunity to experience PEVs first hand, they can...

224

Secrets of the Motor That Drives Archaea Revealed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Secrets of the Motor That Drives Archaea Revealed Secrets of the Motor That Drives Archaea Revealed Print Thursday, 14 February 2013 00:00 An international team led by John Tainer...

225

Indianapolis Offers a Lesson on Driving Demand | Department of...  

Energy Savers [EERE]

Indianapolis Offers a Lesson on Driving Demand Indianapolis Offers a Lesson on Driving Demand The flier for EcoHouse, with the headline 'Save energy, save money, improve your home'...

226

HybriDrive Propulsion System Cleaner, smarter power for transit  

E-Print Network [OSTI]

to Full Commercialization of Fuel Cell Buses #12;Well-to-Wheels Efficiency 6 · Battery EV is best at 40 Vehicle Energy Storage System (ESS) Storage and Extraction 0.95 * 0.95 = 0.9R-4 Bffng 10.7% Bffc 5.9% Bze (H2) and Compression 0.65 * 0.9 = 0.59R-6 H2 Transportation and Storage 0.9R-7 H2 Delivery to Vehicle

227

Fast wave current drive in DEMO  

SciTech Connect (OSTI)

The ability to non-inductively drive a large fraction of the toroidal plasma current in magnetically confined plasmas is an essential requirement for steady state fusion reactors such as DEMO. Besides neutral beam injection (NBI), electron-cyclotron resonance heating (ECRH) and lower hybrid wave heating (LH), ion-cyclotron resonance heating (ICRH) is a promising candidate to drive current, in particular at the high temperatures expected in fusion plasmas. In this paper, the current drive (CD) efficiencies calculated with coupled ICRF wave / CD numerical codes for the DEMO-1 design case (R{sub 0}=9m, B{sub 0}=6.8T, a{sub p}=2.25m) [1] are presented. It will be shown that although promising CD efficiencies can be obtained in the usual ICRF frequency domain (20-100MHz) by shifting the dominant ion-cyclotron absorption layers to the high-field side, operation at higher frequencies (100-300MHz) has a stronger CD potential, provided the parasitic RF power absorption of the alpha particles can be minimized.

Lerche, E.; Van Eestera, D.; Messiaen, A. [Association EURATOM-Belgian State, LPP-ERM/KMS, TEC partner, Brussels (Belgium); Franke, T. [Max-Planck-Institut für Plasmaphysik, EURATOM-Assoziation, Garching (Germany); Collaboration: EFDA-PPPT Contributors

2014-02-12T23:59:59.000Z

228

On the warp drive space-time  

E-Print Network [OSTI]

In this paper the problem of the quantum stability of the two-dimensional warp drive spacetime moving with an apparent faster than light velocity is considered. We regard as a maximum extension beyond the event horizon of that spacetime its embedding in a three-dimensional Minkowskian space with the topology of the corresponding Misner space. It is obtained that the interior of the spaceship bubble becomes then a multiply connected nonchronal region with closed timelike curves and that the most natural vacuum allows quantum fluctuations which do not induce any divergent behaviour of the re-normalized stress-energy tensor, even on the event (Cauchy) chronology horizon. In such a case, the horizon encloses closed timelike curves only at scales close to the Planck length, so that the warp drive satisfies the Ford's negative energy-time inequality. Also found is a connection between the superluminal two-dimensional warp drive space and two-dimensional gravitational kinks. This connection allows us to generalize the considered Alcubierre metric to a standard, nonstatic metric which is only describable on two different coordinate patches

Pedro F. Gonzalez-Diaz

2000-04-10T23:59:59.000Z

229

FY 2014 Annual Progress Report- Electric Drive Technologies Program  

Broader source: Energy.gov [DOE]

FY 2014 Annual Progress Report for the Electric Drive Technologies Program of the Vehicle Technologies Office, DOE/EE-1163

230

Drive torque actuation in active surge control of centrifugal compressors  

E-Print Network [OSTI]

an approximation of a real compression system. 1 #12;CompressorShaft Electric drive Active surge control law Shaft (1999b) or Willems and de Jager (1999). In this study, which is on compressors with electrical drives, we propose to use the electrical drive as a means of active surge control, as depicted in Figure 1.

Gravdahl, Jan Tommy

231

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways #  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways # Alain Girault a a Inria the problem of the hybrid control of autonomous vehicles driving on automated highways. Vehicles to be dealt with: a vehicle driving in a single­lane highway must never collide with its leading vehicle

Girault, Alain

232

LAPP-TECH-2013-01 DRIVE BEAM STRIPLINE BPM  

E-Print Network [OSTI]

1 LAPP-TECH-2013-01 DRIVE BEAM STRIPLINE BPM ELECTRONICS AND ACQUISITION. Jean-Marc Nappa, Jean- around acquisition and components tests for drive beam stripline BPM read-out. The choice of the presented stripline BPM as the drive beam position monitor is not definitive. The aim of this study

Paris-Sud XI, Université de

233

International Assessment of Electric-Drive Vehicles: Policies, Markets, and Technologies  

E-Print Network [OSTI]

Assessmentof Electric-Drive Vehicles: Policies, Markets, andInternational Assessment Electric-Drive Vehicles: Policies,International Assessment Electric-Drive Vehicles Policies,

Sperling, Daniel; Lipman, Timothy

2003-01-01T23:59:59.000Z

234

Economic Assessment of Electric-Drive Vehicle Operation in California and the United States  

E-Print Network [OSTI]

ECONOMIC ASSESSMENT OF ELECTRIC-DRIVE VEHICLE OPERATION INECONOMIC ASSESSMENT OF ELECTRIC-DRIVE VEHICLE OPERATION INconsumers to switch to electric-drive vehicles, including a

Lidicker, Jeffrey R.; Lipman, Timothy E.; Shaheen, Susan A.

2010-01-01T23:59:59.000Z

235

Comparing Two Types of Magnetically- Coupled Adjustable Speed Drives with Variable Frequency Drives in Pump and Fan Applications  

E-Print Network [OSTI]

This paper presents the results from laboratory tests on MagnaDrive Corporations fixed-magnet magnetically-coupled adjustable speed drive (MC-ASD) and Coyote Electronics electromagnetic MC-ASD as compared to a typical variable frequency drive (VFD...

Anderson, K. J.; Chvala, W. D.

236

PWM drive filter inductor influence on transient immunity  

SciTech Connect (OSTI)

Surges of less than 200% magnitude caused by utility capacitor switching can disrupt PWM drives. In this paper, the disruption mechanism is investigated by SPICE simulation of the drive and the results are compared to field tests. An over current surge in the rectifier/filter section and dc over voltage are the most common disruption mechanisms. The drive dc filter inductor is the most important factor in capacitor transient sensitivity of the drive. A drive without the inductor or one in which the inductor is saturated by the transient is vulnerable to disruption.

Wagner, V.E. [Detroit Edison, MI (United States); Strangas, E. [Michigan State Univ., East Lansing, MI (United States). Dept. of Electrical Engineering

1995-12-31T23:59:59.000Z

237

Oscillatory nonohomic current drive for maintaining a plasma current  

DOE Patents [OSTI]

Apparatus and methods are described for maintaining a plasma current with an oscillatory nonohmic current drive. Each cycle of operation has a generation period in which current driving energy is applied to the plasma, and a relaxation period in which current driving energy is removed. Plasma parameters, such as plasma temperature or plasma average ionic charge state, are modified during the generation period so as to oscillate plasma resistivity in synchronism with the application of current driving energy. The invention improves overall current drive efficiencies.

Fisch, N.J.

1984-01-01T23:59:59.000Z

238

Collaboration drives achievement in protein structure research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group and UserofProtein structure research Collaboration drives

239

Drive Less, Save More | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTanklessDOJ TitleDr. Steven Chu About Us Dr. Steven Chu -(FY)Drive

240

Electrifying Your Drive | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy UsageAUDITVehiclesTanklessDOJ TitleDr. Steven ChuEffect ofElectrifying Your Drive

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

What Drives U.S. Gasoline Prices?  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--StateWinterYearFeet)perWestern States CoalbedWhat Drives

242

Driving Green com | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to:52c8ff988c1DeringDolgeville,Massachusetts:Drax SiemensSystemsDriving Green

243

Has Driving Come to a Halt?  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0, 1997Environment >7,992000 HighlightsHas Driving Come

244

Driving/Idling Resources | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeat Pump Models |Conduct, Parent(CRADA andDriving Innovation at the National

245

GenDrive Limited | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartmentAUDIT REPORTOpen EnergyBoard" form. To createResearch Groups JumpGenDrive

246

Well-to-Wheels analysis of landfill gas-based pathways and their addition to the GREET model.  

SciTech Connect (OSTI)

Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil fuel input and only minimal GHG emissions (1.5-7.7 kg CO{sub 2}e /MM Btu) on a WTW basis. Thus, LFG-based natural gas can be one of the lowest GHG-emitting fuels for light- or heavy-duty vehicles. This report discusses the size and scope of biomethane resources from landfills and the pathways by which those resources can be turned into and utilized as vehicle fuel. It includes characterizations of the LFG stream and the processes used to convert low-Btu LFG into high-Btu renewable natural gas (RNG); documents the conversion efficiencies and losses of those processes, the choice of processes modeled in GREET, and other assumptions used to construct GREET pathways; and presents GREET results by pathway stage. GREET estimates of well-to-pump (WTP), pump-to-wheel (PTW), and WTW energy, fossil fuel, and GHG emissions for each LFG-based pathway are then summarized and compared with similar estimates for fossil natural gas and petroleum pathways.

Mintz, M.; Han, J.; Wang, M.; Saricks, C.; Energy Systems

2010-06-30T23:59:59.000Z

247

Well performance under solutions gas drive  

SciTech Connect (OSTI)

A fully implicit black-oil simulator was written to predict the drawdown and buildup responses for a single well under Solution Gas Drive. The model is capable of handling the following reservoir behaviors: Unfractured reservoir, Double-Porosity system, and Double Permeability-Double Porosity model of Bourdet. The accuracy of the model results is tested for both single-phase liquid flow and two-phase flow. The results presented here provide a basis for the empirical equations presented in the literature. New definitions of pseudopressure and dimensionless time are presented. By using these two definitions, the multiphase flow solutions correlate with the constant rate liquid flow solution for both transient and boundary-dominated flow. For pressure buildup tests, an analogue for the liquid solution is constructed from the drawdown pseudopressure, similar to the reservoir integral of J. Jones. The utility of using the producing gas-oil ration at shut in to compute pseudopressures and pseudotimes is documented. The influence of pressure level and skin factor on the Inflow Performance Relationship (IPR) of wells producing solution gas drive systems is examined. A new definition of flow efficiency that is based on the structure of the deliverability equations is proposed. This definition avoids problems that result when the presently available methods are applied to heavily stimulated wells. The need for using pseudopressures to analyze well test data for fractured reservoirs is shown. Expressions to compute sandface saturations for fractured systems are presented.

Camacho-Velazquez, R.G.

1987-01-01T23:59:59.000Z

248

Electric-drive tractability indicator integrated in hybrid electric vehicle tachometer  

DOE Patents [OSTI]

An indicator, system and method of indicating electric drive usability in a hybrid electric vehicle. A tachometer is used that includes a display having an all-electric drive portion and a hybrid drive portion. The all-electric drive portion and the hybrid drive portion share a first boundary which indicates a minimum electric drive usability and a beginning of hybrid drive operation of the vehicle. The indicated level of electric drive usability is derived from at least one of a percent battery discharge, a percent maximum torque provided by the electric drive, and a percent electric drive to hybrid drive operating cost for the hybrid electric vehicle.

Tamai, Goro; Zhou, Jing; Weslati, Feisel

2014-09-02T23:59:59.000Z

249

Miniature pipe crawler tractor  

DOE Patents [OSTI]

A pipe crawler tractor may comprise a half tractor assembly having a first base drive wheel, a second base drive wheel, and a top drive wheel. The drive wheels are mounted in spaced-apart relation so that the top drive wheel is positioned between the first and second base drive wheels. The mounting arrangement is also such that the first and second base drive wheels contact the inside surface of the pipe at respective first and second positions and so that the top drive wheel contacts the inside surface of the pipe at a third position, the third position being substantially diametrically opposed to the first and second positions. A control system connected to the half tractor assembly controls the rotation of the first base wheel, the second base wheel, and the top drive wheel to move the half tractor assembly within the pipe.

McKay, Mark D. (Idaho Falls, ID); Anderson, Matthew O. (Idaho Falls, ID); Ferrante, Todd A. (Westerville, OH); Willis, W. David (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

250

In-plane ultrasonic velocity measurement of longitudinal and shear waves in the machine direction with transducers in rotating wheels  

DOE Patents [OSTI]

An improved system for measuring the velocity of ultrasonic signals within the plane of moving web-like materials, such as paper, paperboard and the like. In addition to velocity measurements of ultrasonic signals in the plane of the web in the MD and CD, one embodiment of the system in accordance with the present invention is also adapted to provide on-line indication of the polar specific stiffness of the moving web. In another embodiment of the invention, the velocity of ultrasonic signals in the plane of the web are measured by way of a plurality of ultrasonic transducers carried by synchronously driven wheels or cylinders, thus eliminating undue transducer wear due to any speed differences between the transducers and the web. In order to provide relatively constant contact force between the transducers and the webs, the transducers are mounted in a sensor housings which include a spring for biasing the transducer radially outwardly. The sensor housings are adapted to be easily and conveniently mounted to the carrier to provide a relatively constant contact force between the transducers and the moving web. 37 figs.

Hall, M.S.; Jackson, T.G.; Knerr, C.

1998-02-17T23:59:59.000Z

251

Vehicle drive module having improved terminal design  

DOE Patents [OSTI]

A terminal structure for vehicle drive power electronics circuits reduces the need for a DC bus and thereby the incidence of parasitic inductance. The structure is secured to a support that may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as by direct contact between the terminal assembly and AC and DC circuit components. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C.; Radosevich, Lawrence D.; Phillips, Mark G.; Kehl, Dennis L.; Kaishian, Steven C.; Kannenberg, Daniel G.

2006-04-25T23:59:59.000Z

252

Vehicle drive module having improved cooling configuration  

DOE Patents [OSTI]

An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Radosevich, Lawrence D.; Meyer, Andreas A.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

2007-02-13T23:59:59.000Z

253

Vehicle drive module having improved EMI shielding  

DOE Patents [OSTI]

EMI shielding in an electric vehicle drive is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C.; Kehl, Dennis L.; Gettelfinger, Lee A.; Kaishian, Steven C.; Phillips, Mark G.; Radosevich, Lawrence D.

2006-11-28T23:59:59.000Z

254

Cooling Tower Energy Conservation Through Hydraulic Fan Drives  

E-Print Network [OSTI]

Fan Drive Eliminates These Problems from the Drive Train. The electric motor is at ground level; close coupled to a hydraulic pump, filters and oil reservoir. Hydraulic lines bring oil flow to the lightweight hydraulic motor mounted at the fan... Tower Fan Drives Are Many: It removes the hazard of costly fan wrecks and shaft coupling breakage. It eliminates gearbox maintenance, breakdown or replacement. The electric motor is mounted with the reservoir and pump at ground level for ease...

Dickerson, J.

255

A motor drive control system for the Lidar Polarimeter  

E-Print Network [OSTI]

A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Submitted to the Graduate College of Texas A/M University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCF, May 1977 Major... Subject: Electrical Engineering A MOTOR DRIVE CONTROL SYSTEM FOR THE LIDAR POLARIMETER A Thesis by Waiming Leung Approved as to style and content by: Chairman o Comm' ee ea o epartment Member Mem er May 1977 ABSTRACT A Motor Drive Control...

Leung, Waiming

1977-01-01T23:59:59.000Z

256

Electrical motor/generator drive apparatus and method  

DOE Patents [OSTI]

The present disclosure includes electrical motor/generator drive systems and methods that significantly reduce inverter direct-current (DC) bus ripple currents and thus the volume and cost of a capacitor. The drive methodology is based on a segmented drive system that does not add switches or passive components but involves reconfiguring inverter switches and motor stator winding connections in a way that allows the formation of multiple, independent drive units and the use of simple alternated switching and optimized Pulse Width Modulation (PWM) schemes to eliminate or significantly reduce the capacitor ripple current.

Su, Gui Jia

2013-02-12T23:59:59.000Z

257

High-Temperature, Air-Cooled Traction Drive Inverter Packaging  

Broader source: Energy.gov (indexed) [DOE]

Air-Cooled Traction Drive Inverter Packaging Madhu Chinthavali Oak Ridge National Laboratory June 10, 2010 Project ID: APE025 This presentation does not contain any proprietary,...

258

EV Everywhere Workshop: Traction Drive Systems Breakout Group...  

Broader source: Energy.gov (indexed) [DOE]

the EV Everywhere Grand Challenge Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL....

259

EV Everywhere Grand Challenge Introduction for Electric Drive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL....

260

ac motor drives: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30...

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

ac motor drive: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: and Quantitative Account Gear-Train Servo Error Types. IV. DC VARIABLE SPEED MOTOR DRIVE DESIGN CONSIDERATIONS AND RFALIZATION. Introduction. 27 29 30...

262

Electric Drive and Advanced Battery and Components Testbed (EDAB...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Peer Evaluation Meeting vss033carlson2012o.pdf More Documents & Publications Electric Drive and Advanced Battery and Components Testbed (EDAB) Vehicle Technologies Office...

263

Electric Drive Vehicle Level Control Development Under Various...  

Broader source: Energy.gov (indexed) [DOE]

3 The objective is to develop the entire vehicle thermal management system for two electric drive vehicles (HEVs, PHEVs). Limited battery power and low engine efficiency at...

264

US DRIVE Materials Technical Team Roadmap | Department of Energy  

Energy Savers [EERE]

Materials Technical Team Roadmap US DRIVE Materials Technical Team Roadmap The Materials Technical Team (MTT) focuses primarily on reducing the mass of structural systems such as...

265

Supercomputers Drive Discovery of Materials for More Efficient...  

Office of Science (SC) Website

Supercomputers Drive Discovery of Materials for More Efficient Carbon Capture Advanced Scientific Computing Research (ASCR) ASCR Home About Research Facilities Science Highlights...

266

Using Partnerships to Drive Demand and Provide Services in Communities...  

Energy Savers [EERE]

and Discussion Summary More Documents & Publications Strategies for Marketing and Driving Demand for Commercial Financing Products Information Technology Tools for Multifamily...

267

Strategies for Marketing and Driving Demand for Commercial Financing...  

Energy Savers [EERE]

Slides and Discussion Summary More Documents & Publications Using Partnerships to Drive Demand and Provide Services in Communities Financial Vehicles within an Integrated Energy...

268

US DRIVE Electrochemical Energy Storage Technical Team Roadmap...  

Broader source: Energy.gov (indexed) [DOE]

This U.S. DRIVE electrochemical energy storage roadmap describes ongoing and planned efforts to develop electrochemical energy storage technologies for plug-in electric vehicles...

269

The Drive for Energy Diversity and Sustainability: The Impact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Diversity and Sustainability: The Impact on Transportation Fuels and Propulsion System Portfolios The Drive for Energy Diversity and Sustainability: The Impact on Transportation...

270

Defining Real World Drive Cycles to Support APRF Technology Evaluation...  

Broader source: Energy.gov (indexed) [DOE]

DOE strategic goalsbarriers addressed - F: Constant advances in technology * Fuel energy consumption variability of different technologies to driving variation - D: Lack of...

271

Phonon localization drives nanoregions in a relaxor ferroelectric...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

localization drives nanoregions in a relaxor ferroelectric April 11, 2014 This inelastic neutron scattering spectrum shows the localizing modes (LMs) between the transverse optic...

272

Accelerating the Electrification of U.S. Drive Trains: Ready...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Accelerating the Electrification of U.S. Drive Trains: Ready and Affordable Technology Solutions for Domestically Manufactured Advanced...

273

US DRIVE Vehicle Systems and Analysis Technical Team Roadmap...  

Energy Savers [EERE]

Vehicle Systems and Analysis Technical Team Roadmap US DRIVE Vehicle Systems and Analysis Technical Team Roadmap VSATT provides the analytic support and subsystem characterizations...

274

Analysis of national pay-as-you-drive insurance systems and other variable driving charges  

SciTech Connect (OSTI)

Under Pay as You Drive insurance (PAYD), drivers would pay part of their automobile insurance premium as a per-gallon surcharge every time they filled their gas tank. By transfering a portion of the cost of owning a vehicle from a fixed cost to a variable cost, PAYD would discourage driving. PAYD has been proposed recently in California as a means of reforming how auto insurance is provided. PAYD proponents claim that, by forcing drivers to purchase at least part of their insurance every time they refuel their car, PAYD would reduce or eliminate the need for uninsured motorist coverage. Some versions of PAYD proposed in California have been combined with a no-fault insurance system, with the intention of further reducing premiums for the average driver. Other states have proposed PAYD systems that would base insurance premiums on annual miles driven. In this report we discuss some of the qualitative issues surrounding adoption of PAYD and other policies that would convert other fixed costs of driving (vehicle registration, safety/emission control system inspection, and driver license renewal) to variable costs. We examine the effects of these policies on two sets of objectives: objectives related to auto insurance reform, and those related to reducing fuel consumption, CO{sub 2} emissions, and vehicle miles traveled. We pay particular attention to the first objective, insurance reform, since this has generated the most interest in PAYD to date, at least at the state level.

Wenzel, T.

1995-07-01T23:59:59.000Z

275

Conceptual Design - Polar Drive Ignition Campaign  

SciTech Connect (OSTI)

The Laboratory for Laser Energetics (LLE) at the University of Rochester is proposing a collaborative effort with Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratories (LANL), the Naval Research Laboratory (NRL), and General Atomics (GA) with the goal of developing a cryogenic polar drive (PD) ignition platform on the National Ignition Facility (NIF). The scope of this proposed project requires close discourse among theorists, experimentalists, and laser and system engineers. This document describes how this proposed project can be broken into a series of parallel independent activities that, if implemented, could deliver this goal in the 2017 timeframe. This Conceptual Design document is arranged into two sections: mission need and design requirements. Design requirements are divided into four subsystems: (1) A point design that details the necessary target specifications and laser pulse requirements; (2) The beam smoothing subsystem that describes the MultiFM 1D smoothing by spectral dispersion (SSD); (3) New optical elements that include continuous phase plates (CPP's) and distributed polarization rotators (DPR's); and (4) The cryogenic target handling and insertion subsystem, which includes the design, fabrication, testing, and deployment of a dedicated PD ignition target insertion cryostat (PD-ITIC). This document includes appendices covering: the primary criteria and functional requirements, the system design requirements, the work breakdown structure, the target point design, the experimental implementation plan, the theoretical unknowns and technical implementation risks, the estimated cost and schedule, the development plan for the DPR's, the development plan for MultiFM 1D SSD, and a list of acronym definitions. While work on the facility modifications required for PD ignition has been in progress for some time, some of the technical details required to define the specific modifications for a Conceptual Design Review (CDR) remain to be defined. In all cases, the facility modifications represent functional changes to existing systems or capabilities. The bulk of the scope yet to be identified is associated with the DPR's and MultiFM beam smoothing. Detailed development plans for these two subsystems are provided in Appendices H and I; additional discussion of subsystem requirements based on the physics of PD ignition is given in Section 3. Accordingly, LLE will work closely with LLNL to develop detailed conceptual designs for the PD-specific facility modifications, including assessments of the operational impact of implementation (e.g., changing optics for direct rather than indirect-drive illumination and swapping from a hohlraum-based ITIC to one that supports PD). Furthermore, the experimental implementation plan represents the current best understanding of the experimental campaigns required to achieve PD ignition. This plan will evolve based on the lessons learned from the National Ignition Campaign (NIC) and ongoing indirect-drive ignition experiments. The plan does not take the operational realities of the PD configuration into account; configuration planning for the proposed PD experiments is beyond the scope of this document.

Hansen, R

2012-04-05T23:59:59.000Z

276

Well-to-wheels analysis of energy use and greenhouse gas emissions of plug-in hybrid electric vehicles.  

SciTech Connect (OSTI)

Plug-in hybrid electric vehicles (PHEVs) are being developed for mass production by the automotive industry. PHEVs have been touted for their potential to reduce the US transportation sector's dependence on petroleum and cut greenhouse gas (GHG) emissions by (1) using off-peak excess electric generation capacity and (2) increasing vehicles energy efficiency. A well-to-wheels (WTW) analysis - which examines energy use and emissions from primary energy source through vehicle operation - can help researchers better understand the impact of the upstream mix of electricity generation technologies for PHEV recharging, as well as the powertrain technology and fuel sources for PHEVs. For the WTW analysis, Argonne National Laboratory researchers used the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed by Argonne to compare the WTW energy use and GHG emissions associated with various transportation technologies to those associated with PHEVs. Argonne researchers estimated the fuel economy and electricity use of PHEVs and alternative fuel/vehicle systems by using the Powertrain System Analysis Toolkit (PSAT) model. They examined two PHEV designs: the power-split configuration and the series configuration. The first is a parallel hybrid configuration in which the engine and the electric motor are connected to a single mechanical transmission that incorporates a power-split device that allows for parallel power paths - mechanical and electrical - from the engine to the wheels, allowing the engine and the electric motor to share the power during acceleration. In the second configuration, the engine powers a generator, which charges a battery that is used by the electric motor to propel the vehicle; thus, the engine never directly powers the vehicle's transmission. The power-split configuration was adopted for PHEVs with a 10- and 20-mile electric range because they require frequent use of the engine for acceleration and to provide energy when the battery is depleted, while the series configuration was adopted for PHEVs with a 30- and 40-mile electric range because they rely mostly on electrical power for propulsion. Argonne researchers calculated the equivalent on-road (real-world) fuel economy on the basis of U.S. Environmental Protection Agency miles per gallon (mpg)-based formulas. The reduction in fuel economy attributable to the on-road adjustment formula was capped at 30% for advanced vehicle systems (e.g., PHEVs, fuel cell vehicles [FCVs], hybrid electric vehicles [HEVs], and battery-powered electric vehicles [BEVs]). Simulations for calendar year 2020 with model year 2015 mid-size vehicles were chosen for this analysis to address the implications of PHEVs within a reasonable timeframe after their likely introduction over the next few years. For the WTW analysis, Argonne assumed a PHEV market penetration of 10% by 2020 in order to examine the impact of significant PHEV loading on the utility power sector. Technological improvement with medium uncertainty for each vehicle was also assumed for the analysis. Argonne employed detailed dispatch models to simulate the electric power systems in four major regions of the US: the New England Independent System Operator, the New York Independent System Operator, the State of Illinois, and the Western Electric Coordinating Council. Argonne also evaluated the US average generation mix and renewable generation of electricity for PHEV and BEV recharging scenarios to show the effects of these generation mixes on PHEV WTW results. Argonne's GREET model was designed to examine the WTW energy use and GHG emissions for PHEVs and BEVs, as well as FCVs, regular HEVs, and conventional gasoline internal combustion engine vehicles (ICEVs). WTW results are reported for charge-depleting (CD) operation of PHEVs under different recharging scenarios. The combined WTW results of CD and charge-sustaining (CS) PHEV operations (using the utility factor method) were also examined and reported. According to the utility factor method, the share of vehicle miles trav

Elgowainy, A.; Han, J.; Poch, L.; Wang, M.; Vyas, A.; Mahalik, M.; Rousseau, A.

2010-06-14T23:59:59.000Z

277

Tape-Drive Based Plasma Mirror  

SciTech Connect (OSTI)

We present experimental results on a tape-drive based plasma mirror which could be used for a compact coupling of a laser beam into a staged laser driven electron accelerator. This novel kind of plasma mirror is suitable for high repetition rates and for high number of laser shots. In order to design a compact, staged laser plasma based accelerator or collider [1], the coupling of the laser beam into the different stages represents one of the key issues. To limit the spatial foot print and thus to realize a high overall acceleration gradient, a concept has to be found which realizes this in-coupling within a few centimeters (cf. Fig 1). The fluence of the laser pulse several centimeters away from the acceleration stage (focus) exceeds the damage threshold of any available mirror coating. Therefore, in reference [2] a plasma mirror was suggested for this purpose. We present experiments on a tape-drive based plasma mirror which could be used to reflect the focused laser beam into the acceleration stage. Plasma mirrors composed of antireflection coated glass substrates are usually used to improve the temporal laser contrast of laser pulses by several orders of magnitudes [3,4]. This is particularly important for laser interaction with solid matter, such as ion acceleration [5,6] and high harmonic generation on surfaces [7]. Therefore, the laser pulse is weekly focused onto a substrate. The main pulse generates a plasma and is reflected at the critical surface, whereas the low intensity pre-pulse (mainly the Amplified Spontaneous Emission pedestal) will be transmitted through the substrate before the mirror has been triggered. Several publications [3,4] demonstrate a conservation of the spatial beam quality and a reflectivity of about 70 %. The drawback of this technique is the limited repetition rate since for every shot a fresh surface has to be provided. In the past years several novel approaches for high repetition rate plasma mirrors have been developed [2, 8]. Nevertheless, for the staged accelerator scheme a second important requirement has to be considered. Since the electron beam has to propagate through the mirror, the thickness of the substrate has to be as thin as possible to reduce the distortion of the electron beam. A tape of only several micrometer thickness can overcome these disadvantages. It can be used with a sufficient repetition rate while it allows the electron beam to propagate through with a minimum of scattering.

Sokollik, Thomas; Shiraishi, Satomi; Osterhoff, Jens; Evans, Eugene; Gonsalves, Anthony; Nakamura, Kei; vanTilborg, Jeroen; Lin, Chen; Toth, Csaba; Leemans, Wim

2011-07-22T23:59:59.000Z

278

Effect of ninety degree elbow on the accuracy of a non-magnetic, insertion paddle wheel flowmeter  

SciTech Connect (OSTI)

Monitoring energy use in commercial and institutional buildings often requires measurement of chilled and hot water. For retrofit applications, insertion flowmeters are an economical alternative to fixed flow meters such as orifices or venturi meters. The insertion flow meters can be hot tapped into the piping without having to shut down operations. A major problem encountered in retrofit applications of flow meters is finding a location in a pipe where there is at least 10 to 15 diameters of straight pipe. Piping in buildings is constrained by the layout and design of the building, there may only be short runs of straight pipe where flowmeters can be installed. The purpose of this study was to quantify the measurement error caused by installation of flow meter downstream of a 90 degree elbow. The flowmeter was an insertion type, nonmagnetic, paddle wheel flow meter. Meter locations from 2.1 to 9.8 diameters downstream of a 90 degree elbow were studied in a 0.1 in diameter pipe for flow velocities ranging from 0.3 to 3 m/s. At each location downstream of the elbow, the meter was also rotated in 45 increments (from 0 to 180{degree}) around the circumference of the pipe to evaluate choice of circumferential location on flow error. Output from the flowmeter was compared to results obtained with load cells on a 38 m{sup 3} tank that collected the flow pumped through the test section. Results were presented in terms of percent error relative to the load cells as a function of downstream location, circumferential rotation angle, and velocity. The largest errors occurred at 2.1 diameters downstream of the elbow and 180 degree rotation angle. Velocity of the water appeared to have little influence on the results for velocities ranging from 0.3 to 3 m/s. Uncertainty results for all major measurement points are also presented.

Parker, B.; O`Neal, D.L. [Texas A and M Univ., College Station, TX (United States). Dept. of Mechanical Engineering

1995-11-01T23:59:59.000Z

279

Working on new gas turbine cycle for heat pump drive  

E-Print Network [OSTI]

Working on new gas turbine cycle for heat pump drive FILE COPY TAP By Irwin Stambler, Field Editor, is sized for a 10-ton heat pump system - will be scaled to power a commercial product line ranging from 7 of the cycle- as a heat pump drive for commercial installations. Company is testing prototype gas turbine

Oak Ridge National Laboratory

280

A Driving Simulator for Teaching Embedded Automotive Control Applications  

E-Print Network [OSTI]

A Driving Simulator for Teaching Embedded Automotive Control Applications Paul G. Griffiths component uses a typical automotive power- train micro-controller and teaches topics in system dynamics students build a fixed-based driving simulator to test advanced automotive control system designs

Gillespie, Brent

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

1851 N Research Drive Bowling Green, Ohio 43403-0201  

E-Print Network [OSTI]

hired from a temporary agency is not considered an employee of Bowling Green State University1851 N Research Drive Bowling Green, Ohio 43403-0201 419-372-8421 Email: ohr@bgsu.edu Fax 419 Print #12;1851 N Research Drive Bowling Green, Ohio 43403-0201 419-372-8421 Email: ohr@bgsu.edu Fax 419

Moore, Paul A.

282

EFFICIENCY AND SCALING OF CURRENT DRIVE AND REFUELLING  

E-Print Network [OSTI]

EFFICIENCY AND SCALING OF CURRENT DRIVE AND REFUELLING BY SPHEROMAK INJEXTIQN INTO A TOKAMAK M ABSTRACT. The first measurements of current drive (refluxing) and refuelling by spheromak injection injection, and refuelling is attributed to the rapid incorporation of the dense spheromak plasma

Brown, Michael R.

283

Model Based Vehicle Tracking for Autonomous Driving in Urban Environments  

E-Print Network [OSTI]

Model Based Vehicle Tracking for Autonomous Driving in Urban Environments Anna Petrovskaya environments. This paper describes moving vehicle tracking module that we developed for our autonomous driving in this area. DARPA has organized a series of competitions for autonomous vehicles. In 2005, autonomous

284

GNSS Driving Innovation in the Geospatial Industry/Community  

E-Print Network [OSTI]

GNSS Driving Innovation in the Geospatial Industry/Community Don Grant Associate Professor in Geospatial Science, RMIT University GNSS Futures UNSW, Sydney, 7-8 July 2014 #12;Outline · Does my topic;So is this even the right topic? · Is GNSS driving geospatial innovation? · Or are geospatial

Sekercioglu, Y. Ahmet

285

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways  

E-Print Network [OSTI]

A Hybrid Controller for Autonomous Vehicles Driving on Automated Highways Alain Girault a aInria Rh of the hybrid control of autonomous vehicles driving on automated highways. Vehicles are autonomous, so they do not commu- nicate with each other nor with the infrastructure. Two problems have to be dealt with: a vehicle

Girault, Alain

286

Does economic development drive the fertility rebound in OECD countries?  

E-Print Network [OSTI]

1 Does economic development drive the fertility rebound in OECD countries? Angela Luci, Olivier Thévenon 167 2010 #12;2 #12;3 Does economic development drive the fertility rebound in OECD countries.thevenon@ined.fr We examine how far changes in fertility trends are related to ongoing economic development in OECD

Paris-Sud XI, Université de

287

Alcohol / drug-impaired driving Studying blood alcohol concentration  

E-Print Network [OSTI]

. Traffic safety culture Few additional safety improvements can be expected from engineering or enforcement about driving, or, creating a traffic safety culture. #12; and driving safety courses. Safer vehicle occupants The CenTer for TransporTaTion safeTy What was a driver

288

Alcohol / drug-impaired driving Studying blood alcohol concentration  

E-Print Network [OSTI]

. Traffic safety culture Few additional safety improvements can be expected from engineering or enforcement about driving, or, creating a traffic safety culture. http://tti.tamu.edu/cts/ #12; and driving safety courses. Safer vehicle occupants The CenTer for TransporTaTion safeTy What was a driver

289

Active surge control of centrifugal compressors using drive torque  

E-Print Network [OSTI]

the operating range of the machine, and ef- ficiency is limited. Usually a recycle line around the compressor recycling, and there is a potential for reduced energy consumption of the compressor. Electric driveActive surge control of centrifugal compressors using drive torque Jan Tommy Gravdahl , Olav

Gravdahl, Jan Tommy

290

Stabilization of unstable periodic orbits in dc drives  

E-Print Network [OSTI]

Electric drive using dc shunt motor or permanent magnet dc (PMDC) motor as prime mover exhibits bifurcation and chaos. The characteristics of dc shunt and PMDC motors are linear in nature. These motors are controlled by pulse width modulation (PWM) technique with the help of semiconductor switches. These switches are nonlinear element that introduces nonlinear characteristics in the drive. Any nonlinear system can exhibit bifurcation and chaos. dc shunt or PMDC drives show normal behavior with certain range of parameter values. It is also observed that these drive show chaos for significantly large ranges of parameter values. In this paper we present a method for controlling chaos applicable to dc shunt and PMDC drives. The results of numerical investigation are presented.

Krishnendu Chakrabarty; Urmila Kar

2014-02-22T23:59:59.000Z

291

Advanced insulated gate bipolar transistor gate drive  

DOE Patents [OSTI]

A gate drive for an insulated gate bipolar transistor (IGBT) includes a control and protection module coupled to a collector terminal of the IGBT, an optical communications module coupled to the control and protection module, a power supply module coupled to the control and protection module and an output power stage module with inputs coupled to the power supply module and the control and protection module, and outputs coupled to a gate terminal and an emitter terminal of the IGBT. The optical communications module is configured to send control signals to the control and protection module. The power supply module is configured to distribute inputted power to the control and protection module. The control and protection module outputs on/off, soft turn-off and/or soft turn-on signals to the output power stage module, which, in turn, supplies a current based on the signal(s) from the control and protection module for charging or discharging an input capacitance of the IGBT.

Short, James Evans (Monongahela, PA); West, Shawn Michael (West Mifflin, PA); Fabean, Robert J. (Donora, PA)

2009-08-04T23:59:59.000Z

292

Base drive and overlap protection circuit  

DOE Patents [OSTI]

An inverter (34) which provides power to an A. C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A. C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A. C. machine is optimized. The control circuit includes a microcomputer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). A base drive and overlap protection circuit is included to insure that both transistors of a complimentary pair are not conducting at the same time. In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Gritter, David J. (Southfield, MI)

1983-01-01T23:59:59.000Z

293

The Natario Warp Drive using Lorentz Boosts according to the Harold White Spacetime Metric potential .  

E-Print Network [OSTI]

The Natario Warp Drive using Lorentz Boosts according to the Harold White Spacetime Metric Warp Drives are solutions of the Einstein Field Equations that allows superluminal travel within drive discovered in 1994 and the Natario warp drive discovered in 2001.The warp drive seems to be very

Paris-Sud XI, Université de

294

Hydrogen Pathways: Updated Cost, Well-to-Wheels Energy Use, and Emissions for the Current Technology Status of Ten Hydrogen Production, Delivery, and Distribution Scenarios  

SciTech Connect (OSTI)

This report describes a life-cycle assessment conducted by the National Renewable Energy Laboratory (NREL) of 10 hydrogen production, delivery, dispensing, and use pathways that were evaluated for cost, energy use, and greenhouse gas (GHG) emissions. This evaluation updates and expands on a previous assessment of seven pathways conducted in 2009. This study summarizes key results, parameters, and sensitivities to those parameters for the 10 hydrogen pathways, reporting on the levelized cost of hydrogen in 2007 U.S. dollars as well as life-cycle well-to-wheels energy use and GHG emissions associated with the pathways.

Ramsden, T.; Ruth, M.; Diakov, V.; Laffen, M.; Timbario, T. A.

2013-03-01T23:59:59.000Z

295

Base drive circuit for a four-terminal power Darlington  

DOE Patents [OSTI]

A high power switching circuit which utilizes a four-terminal Darlington transistor block to improve switching speed, particularly in rapid turn-off. Two independent reverse drive currents are utilized during turn off in order to expel the minority carriers of the Darlington pair at their own charge sweep-out rate. The reverse drive current may be provided by a current transformer, the secondary of which is tapped to the base terminal of the power stage of the Darlington block. In one application, the switching circuit is used in each power switching element in a chopper-inverter drive of an electric vehicle propulsion system.

Lee, Fred C. (Blacksburg, VA); Carter, Roy A. (Salem, VA)

1983-01-01T23:59:59.000Z

296

Interactions between Electric-drive Vehicles and the Power Sector in California  

E-Print Network [OSTI]

2007) Impacts of Electric-drive Vehicles on California'sInteractions between electric-drive vehicles and the powerin emissions found for electric- drive vehicles is a result

McCarthy, Ryan; Yang, Christopher; Ogden, Joan M.

2009-01-01T23:59:59.000Z

297

Simulation Evaluation of Green Driving Strategies Based on Inter-Vehicle Communications  

E-Print Network [OSTI]

green driving strategies for different market penetration rates and communicationGreen Driving Strategies Based on Inter-Vehicle CommunicationsGREEN DRIVING STRATEGIES BASED ON INTER-VEHICLE COMMUNICATIONS

Yang, Hao; Yuan, Daji; Jin, W L; Saphores, Jean-Daniel M

2010-01-01T23:59:59.000Z

298

Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research...  

Broader source: Energy.gov (indexed) [DOE]

Biofuels: Long-Term Energy Benefits Drive U.S. Research Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research Algal Biofuels: Long-Term Energy Benefits Drive U.S. Research...

299

The Wheel Turns  

E-Print Network [OSTI]

in the street. IIJim, corne herso I wBnt to telk to yoU.'I Kirk cems over and knelt 8t Spock's feet, resting hL.;) erms on th(:) Vul can IS knee-3 9 end looking up anxiously into his feee. "What is it, Spack? Have I done something '"rang?" "Of course not...

Piacentini, Valerie

1977-01-01T23:59:59.000Z

300

The Wheel of Fate  

E-Print Network [OSTI]

,," "Goodnight, Jim." Dawn found them already preparing to leave ?. '['he rucksacks stood at the door, together with warm outer clothing for each of them. In the }itchen Jim and Spock were finishing a hasty meel. The skies had cleared, and although...

Piacentini, Valerie, with poetry by Sheila Clark

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Reinventing the Wheel  

E-Print Network [OSTI]

Broadcast Transcript: You heard it here before though maybe not first: China invented everything. From gunpowder to the wheelbarrow to paper and ink, it was made in China first. Which puts the Chinese in a bind. I mean, ...

Hacker, Randi

2009-10-28T23:59:59.000Z

302

Characterizing the acoustic noise generated by hard disk drives and a scheme for detecting noisy hard drives  

E-Print Network [OSTI]

of the requirements for the degree of MASTER OF SCIENCE August 1992 Major Subject: Electrical Engineering s nah7 CHARACTERIZING THE ACOUSTIC NOISE GENERATED BY HARD DISK DRIVES AND A SCHEME FOR DETECTING NOISY HARD DRIVES A Thesis by SEUK BO KIM Approved... 48 48 49 52 53 55 APPENDIX A 58 VITA LIST OF TABLES TABLE Page I Disk Drive Sample Set 16 II Subjective Human Response: Original Noise 22 IH Leq Measured by MIC1 IV Leq Measured by ACC V Leq Grouping of Tv o Sensors 24 26 26 VI...

Kim, Seuk Bo

1992-01-01T23:59:59.000Z

303

Innovation incentives and competition in the hard disk drive industry  

E-Print Network [OSTI]

Firms in the hard disk drive industry are continually engaging in R & D and improving the quality of their products. We explore various determinants of the product innovation incentives for firms concerned with both their ...

Wu, Xiaohua Sherry

2011-01-01T23:59:59.000Z

304

Driving tissue morphogenetic cascades using tunable nanolayered surface coatings  

E-Print Network [OSTI]

Harnessing the synergy between materials at the nanoscale can be a valuable tool in understanding and probing cellular phenomena and in driving specific processes that lead to tissue and organ regeneration and repair. ...

Shah, Nisarg Jaydeep

2014-01-01T23:59:59.000Z

305

Electric Drive Component Manufacturing: Magna E-Car Systems of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Magna E-Car Systems of America, Inc. Electric Drive Component Manufacturing: Magna E-Car Systems of America, Inc. ATP-LD; Cummins Next Generation Tier 2 Bin 2 Diesel Engine...

306

A Survey of Taxi Drivers’ Aberrant Driving Behavior in Beijing  

E-Print Network [OSTI]

Taxis are an important component in Beijing's urban integrated transport system. They provide passengers with convenient, comfortable, and efficient service. However, aberrant driving behaviors occur frequently among Beijing taxi drivers, leading...

Shi, Jing; Tao, Li; Li, Xiaoyue; Xiao, Yao; Atchley, Paul

2013-09-27T23:59:59.000Z

307

Variable Frequency Motor Drives: Harmonics, Power Factor, and Energy Efficiency  

E-Print Network [OSTI]

Variable frequency motor drives (VFD's) have been on the market for many years. Early versions were unreliable and prone to failure. Relatively recent developments in Pulse-Width Modulated (PWM) waveform technology have improved VFD reliability...

Massey, G. W.

308

Series Input Modular Architecture for Driving Multiple LEDs  

E-Print Network [OSTI]

, where each cell drives four 700 mA LEDs. Keywords ­ solid-state lighting, light emitting diodes, LED have been achieved over the past decade in solid state light emitting diodes (LEDs), leading to high

309

A cloud-assisted design for autonomous driving  

E-Print Network [OSTI]

This paper presents Carcel, a cloud-assisted system for autonomous driving. Carcel enables the cloud to have access to sensor data from autonomous vehicles as well as the roadside infrastructure. The cloud assists autonomous ...

Suresh Kumar, Swarun

310

Energy Department Announces $19 Million to Drive Down Solar Soft...  

Broader source: Energy.gov (indexed) [DOE]

sources before the end of the decade. Through SunShot, the Department supports efforts by private companies, universities, and national laboratories to drive down the cost of solar...

311

Low voltage vertical recording preamplifier for hard disk drives  

E-Print Network [OSTI]

, with increased demand for battery powered devices such as laptops, MP3 players, personal video recorders, andmanyother wireless hand-held devices, power consumption has become an important design parameter.Furthermore, in order to continue to increase drive...

Mellachervu, Ramachandra Murthy

2004-11-15T23:59:59.000Z

312

adjustable electric drive: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ogden, Joan M. 2009-01-01 48 220,000-rmin, 2-kW Permanent Magnet Motor Drive for Turbocharger Toshihiko Noguchi, Yosuke Takata * Engineering Websites Summary: -combustion...

313

Strain based preload measurement in drive axle pinion bearings  

E-Print Network [OSTI]

Bearing setting has a significant impact on bearing life and system performance. A strain based load measurement technique that has been previously developed and patented will be used to measure preload in automotive drive ...

Thomas, Anthony H., 1981-

2005-01-01T23:59:59.000Z

314

Electron Bernstein wave current drive modeling in toroidal plasma confinement  

E-Print Network [OSTI]

The steady-state confinement of tokamak plasmas in a fusion reactor requires non-inductively driven toroidal currents. Radio frequency waves in the electron cyclotron (EC) range of frequencies can drive localized currents ...

Decker, Joan, 1977-

2005-01-01T23:59:59.000Z

315

High efficiency pulse motor drive for robotic propulsion  

E-Print Network [OSTI]

The goal of this research is to improve the power efficiency of robotic locomotion through the use of series elastic actuation, with a focus on swimming motion. To achieve high efficiency, electromechanical drives need to ...

Sun, Zhen, M.S. Massachusetts Institute of Technology

2013-01-01T23:59:59.000Z

316

Drive-access transit : a regional analytical framework  

E-Print Network [OSTI]

A framework for analyzing drive-access transit at a regional level is developed in this research. This framework is intended primarily for in-house use by regional transit agencies, yet has implications for the regional ...

Sorensen, James B

2005-01-01T23:59:59.000Z

317

Adjustable Speed AC Motor Drives-Applications Problems  

E-Print Network [OSTI]

Adjustable Speed AC Motor Drives Applications Problems by Dr. P. Enjeti Power Quality Laboratory Department ofElectrical Engineering Texas A&M University College Station, TX 77843 Tel: 409-845-7466 Fax: 409-845-6259 Email..., it generates side effects, some which have been recognized only recently. This paper presents a comprehensive coverage of application issues of PWM inverter controlled ac motor drives which include damage to motor insulation due to reflected voltages caused...

Enjeti, P.

318

Quantum effects in the Alcubierre warp drive spacetime  

E-Print Network [OSTI]

The expectation value of the stress-energy tensor of a free conformally invariant scalar field is computed in a two-dimensional reduction of the Alcubierre ``warp drive'' spacetime. The stress-energy is found to diverge if the apparent velocity of the spaceship exceeds the speed of light. If such behavior occurs in four dimensions, then it appears implausible that ``warp drive'' behavior in a spacetime could be engineered, even by an arbitrarily advanced civilization.

Hiscock, W A

1997-01-01T23:59:59.000Z

319

Photon propagation in a stationary warp drive space-time  

E-Print Network [OSTI]

We simplify the warp drive space-time so that it becomes stationary and the distorsion becomes one-dimensional and static. We use this simplified warp drive space-time as a background for a photon field. We shall especially use the Drummond\\&Hathrell action in order to investigate the velocity effects on photons in this background. Finally, we discuss the limitations of this model.

Claes R Cramer

1995-11-01T23:59:59.000Z

320

Quantum effects in the Alcubierre warp drive spacetime  

E-Print Network [OSTI]

The expectation value of the stress-energy tensor of a free conformally invariant scalar field is computed in a two-dimensional reduction of the Alcubierre ``warp drive'' spacetime. The stress-energy is found to diverge if the apparent velocity of the spaceship exceeds the speed of light. If such behavior occurs in four dimensions, then it appears implausible that ``warp drive'' behavior in a spacetime could be engineered, even by an arbitrarily advanced civilization.

William A. Hiscock

1997-07-10T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Driving Innovation at the National Labs | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit ServicesMirant Potomac River ComplianceCEnergy DrivingDriving

322

Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft PowerPoint - 06 Crawley Drive for Net Zero Energy Commercial Buildings Microsoft...

323

SunLine Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure...  

Broader source: Energy.gov (indexed) [DOE]

SunLine Test Drives Hydrogen Bus: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Projects Fact Sheet. SunLine Test Drives Hydrogen Bus:...

324

U.S. First Responder Safety Training for Advanced Electric Drive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

U.S. First Responder Safety Training for Advanced Electric Drive Vehicle Presentation U.S. First Responder Safety Training for Advanced Electric Drive Vehicle Presentation 2010 DOE...

325

Strong mechanical driving of a single electron spin  

E-Print Network [OSTI]

Quantum devices for sensing and computing applications require coherent quantum systems which can be manipulated in a fast and robust way. Such quantum control is typically achieved using external electric or magnetic fields which drive the system's orbital or spin degrees of freedom. However, most of these approaches require complex and unwieldy antenna or gate structures, and with few exceptions are limited to the regime of weak driving. Here, we present a novel approach to strongly and coherently drive a single electron spin in the solid state using internal strain fields in an integrated quantum device. Specifically, we study individual Nitrogen-Vacancy (NV) spins embedded in diamond mechanical oscillators and exploit the intrinsic strain coupling between spin and oscillator to strongly drive the spins. As hallmarks of the strong driving regime, we directly observe the energy spectrum of the emerging phonon-dressed states and employ our strong, continuous driving for enhancement of the NV spin coherence time. Our results constitute a first step towards strain-driven, integrated quantum devices and open new perspectives to investigate unexplored regimes of strongly driven multi-level systems and to study exotic spin dynamics in hybrid spin-oscillator devices.

Arne Barfuss; Jean Teissier; Elke Neu; Andreas Nunnenkamp; Patrick Maletinsky

2015-03-23T23:59:59.000Z

326

Driving confidence and in-vehicle telematics : a study of technology adoption patterns of the 50+ driving population  

E-Print Network [OSTI]

In-vehicle telematics is a term that encompasses a wide range of technologies, which aid the driving function through features assisting in safety and service tasks. These technologies are designed to give the operator and ...

Hutchinson, Thomas E. (Thomas Ely), 1979-

2004-01-01T23:59:59.000Z

327

Well-to-wheels energy use and greenhouse gas emissions analysis of plug-in hybrid electric vehicles.  

SciTech Connect (OSTI)

Researchers at Argonne National Laboratory expanded the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model and incorporated the fuel economy and electricity use of alternative fuel/vehicle systems simulated by the Powertrain System Analysis Toolkit (PSAT) to conduct a well-to-wheels (WTW) analysis of energy use and greenhouse gas (GHG) emissions of plug-in hybrid electric vehicles (PHEVs). The WTW results were separately calculated for the blended charge-depleting (CD) and charge-sustaining (CS) modes of PHEV operation and then combined by using a weighting factor that represented the CD vehicle-miles-traveled (VMT) share. As indicated by PSAT simulations of the CD operation, grid electricity accounted for a share of the vehicle's total energy use, ranging from 6% for a PHEV 10 to 24% for a PHEV 40, based on CD VMT shares of 23% and 63%, respectively. In addition to the PHEV's fuel economy and type of on-board fuel, the marginal electricity generation mix used to charge the vehicle impacted the WTW results, especially GHG emissions. Three North American Electric Reliability Corporation regions (4, 6, and 13) were selected for this analysis, because they encompassed large metropolitan areas (Illinois, New York, and California, respectively) and provided a significant variation of marginal generation mixes. The WTW results were also reported for the U.S. generation mix and renewable electricity to examine cases of average and clean mixes, respectively. For an all-electric range (AER) between 10 mi and 40 mi, PHEVs that employed petroleum fuels (gasoline and diesel), a blend of 85% ethanol and 15% gasoline (E85), and hydrogen were shown to offer a 40-60%, 70-90%, and more than 90% reduction in petroleum energy use and a 30-60%, 40-80%, and 10-100% reduction in GHG emissions, respectively, relative to an internal combustion engine vehicle that used gasoline. The spread of WTW GHG emissions among the different fuel production technologies and grid generation mixes was wider than the spread of petroleum energy use, mainly due to the diverse fuel production technologies and feedstock sources for the fuels considered in this analysis. The PHEVs offered reductions in petroleum energy use as compared with regular hybrid electric vehicles (HEVs). More petroleum energy savings were realized as the AER increased, except when the marginal grid mix was dominated by oil-fired power generation. Similarly, more GHG emissions reductions were realized at higher AERs, except when the marginal grid generation mix was dominated by oil or coal. Electricity from renewable sources realized the largest reductions in petroleum energy use and GHG emissions for all PHEVs as the AER increased. The PHEVs that employ biomass-based fuels (e.g., biomass-E85 and -hydrogen) may not realize GHG emissions benefits over regular HEVs if the marginal generation mix is dominated by fossil sources. Uncertainties are associated with the adopted PHEV fuel consumption and marginal generation mix simulation results, which impact the WTW results and require further research. More disaggregate marginal generation data within control areas (where the actual dispatching occurs) and an improved dispatch modeling are needed to accurately assess the impact of PHEV electrification. The market penetration of the PHEVs, their total electric load, and their role as complements rather than replacements of regular HEVs are also uncertain. The effects of the number of daily charges, the time of charging, and the charging capacity have not been evaluated in this study. A more robust analysis of the VMT share of the CD operation is also needed.

Elgowainy, A.; Burnham, A.; Wang, M.; Molburg, J.; Rousseau, A.; Energy Systems

2009-03-31T23:59:59.000Z

328

Designing Effective Incentives to Drive Residential Retrofit Program Participation (Text Version)  

Broader source: Energy.gov [DOE]

Transcript of the webinar, "Designing Effective Incentives to Drive Residential Retrofit Program Participation."

329

Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) (Presentation)  

SciTech Connect (OSTI)

This presentation describes NREL's computer aided engineering program for electric drive vehicle batteries.

Pesaran, A. A.

2011-05-01T23:59:59.000Z

330

Simplified Modelling and Control of a Synchronous Machine with VariableSpeed SixStep Drive  

E-Print Network [OSTI]

of electrical power flow in the machine. Cost is a driving factor in the design of such a system, and the power frequency than PWM as well. II. VARIABLE­SPEED ELECTRIC MACHINE DRIVES While the choice of driveSimplified Modelling and Control of a Synchronous Machine with Variable­Speed Six­Step Drive

Sanders, Seth

331

Hybrid Cascaded H-bridges Multilevel Motor Drive Control for Electric Vehicles  

E-Print Network [OSTI]

Hybrid Cascaded H-bridges Multilevel Motor Drive Control for Electric Vehicles Zhong Du1 , Leon M vehicle motor drive applications and hybrid electric vehicle motor drive applications. Keywords: hybrid cascaded H-bridge multilevel converter, DC voltage balance control, multilevel motor drive, electric

Tolbert, Leon M.

332

Overview of Transport, Fast Particle and Heating and Current Drive Physics using Tritium in JET plasmas  

E-Print Network [OSTI]

Overview of Transport, Fast Particle and Heating and Current Drive Physics using Tritium in JET plasmas

333

Overview of Transport, Fast Particle and Heating and Current Drive Physics using Tritium in JET Plasmas  

E-Print Network [OSTI]

Overview of Transport, Fast Particle and Heating and Current Drive Physics using Tritium in JET Plasmas

334

Cancellation of TorqueRipple Due to Nonidealitiesof PermanentMagnet SynchronousMachine Drives  

E-Print Network [OSTI]

-magnet synchronous application than the predecessors. Further, the technique is machine (PMSM) drives dictates

Chapman, Patrick

335

Simulation of Phase Stability at the Flat Top of the CLIC Drive Beam  

E-Print Network [OSTI]

The drive beam phase stability is one of the critical issues of the Compact Linear Collider (CLIC). In this paper the generation and propagation of drive beam phase errors is studied for effects that vary during the drive beam pulse. This includes the influence of drive beam current and phase errors as well as of drive beam accelerator RF phase and amplitude errors on the drive beam phase after the compressor chicanes and the analysis of the propagation of these errors through the drive beam combination scheme. The impact of the imperfections on the main beam is studied including the possible correction with help of a feedforward system.

Gerbershagen, A; Burrows, P

2011-01-01T23:59:59.000Z

336

Cost of Ownership and Well-to-Wheels Carbon Emissions/Oil Use of Alternative Fuels and Advanced Light-Duty Vehicle Technologies  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE), Argonne National Laboratory (Argonne), and the National Renewable Energy Laboratory (NREL) updated their analysis of the well-to-wheels (WTW) greenhouse gases (GHG) emissions, petroleum use, and the cost of ownership (excluding insurance, maintenance, and miscellaneous fees) of vehicle technologies that have the potential to significantly reduce GHG emissions and petroleum consumption. The analyses focused on advanced light-duty vehicle (LDV) technologies such as plug-in hybrid, battery electric, and fuel cell electric vehicles. Besides gasoline and diesel, alternative fuels considered include natural gas, advanced biofuels, electricity, and hydrogen. The Argonne Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) and Autonomie models were used along with the Argonne and NREL H2A models.

Elgowainy, Mr. Amgad [Argonne National Laboratory (ANL); Rousseau, Mr. Aymeric [Argonne National Laboratory (ANL); Wang, Mr. Michael [Argonne National Laboratory (ANL); Ruth, Mr. Mark [National Renewable Energy Laboratory (NREL); Andress, Mr. David [David Andress & Associates, Inc.; Ward, Jacob [U.S. Department of Energy; Joseck, Fred [U.S. Department of Energy; Nguyen, Tien [U.S. Department of Energy; Das, Sujit [ORNL

2013-01-01T23:59:59.000Z

337

Rotating mousehole improves top drive/conventional drilling  

SciTech Connect (OSTI)

Top drive speed and efficiency are limited and have not reached full potential because of operation ``bottlenecks`` during makeup or breakout of triple pipe stands and bottomhole assembly (BHA) change out. Operators and contractors analyzed tools to overcome these limitations and found a potential solution from International Tool Co., a supplier of kelly spinners, in a tool that has improved make/break efficiency and rig floor safety. The Phantom Mouse rotating mousehole assembly was developed to improve drilling efficiency on top-drive-equipped rigs. This new device tightens connections so pipe stands can be set back in derricks. Using the system, crews can quickly and efficiently make up and set back DP stands while drilling ahead with top drives. It can also be used to break out and lay down excess DP from the derrick.

NONE

1995-08-01T23:59:59.000Z

338

Controlled Speed Accessory Drive Program: Programmatic environmental assessment  

SciTech Connect (OSTI)

This document is a programmatic environmental assessment of the Department of Energy's Controlled Speed Accessory Drive (CSAD) program and alternatives. Its purpose is to evaluate CSAD alternatives to assure that environmental priorities are considered at the earliest meaningful point in the decision-making process, and to facilitate the choice of preferable options. This document accords with both the letter and the spirit of the National Environmental Policy Act (NEPA) requirements as interpreted and standardized by the Council on Environmental Quality. The major conclusions reached in this assessment are as follows: (1) controlled speed accessory drive bolted onto existing automobile designs may not provide adequate engine cooling when operated at high ambient temperatures or under heavy loading; (2) when the CSAD is adopted for production, the emissions effect of controlled speed accessory drive will not be a problem. Auto emissions are already controlled by existing regulations, and automobiles with a CSAD must meet the same emission standards as non-CSAD vehicles; (3) the nature of the impact is such that significant expansion of the market will not affect it. The one adverse environmental concern, the engine cooling problem, will probably be remedied by proper optimization of automobiles for controlled speed accessory drive, or, until the problem can be alleviated, it will delay commercialization of the drive. No safety hazard will be introduced to the American roadways. In addition, no adverse environmental concerns directly related to the Controlled Speed Accessory Drive demonstration program are anticipated. Therefore, it is recommended that a finding of no significant impact be prepared.

Not Available

1980-04-14T23:59:59.000Z

339

Electric machine and current source inverter drive system  

SciTech Connect (OSTI)

A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

Hsu, John S

2014-06-24T23:59:59.000Z

340

Metamaterial-based model of the Alcubierre warp drive  

E-Print Network [OSTI]

Electromagnetic metamaterials are capable of emulating many exotic space-time geometries, such as black holes, rotating cosmic strings, and the big bang singularity. Here we present a metamaterial-based model of the Alcubierre warp drive, and study its limitations due to available range of material parameters. It appears that the material parameter range introduces strong limitations on the achievable "warp speed", so that ordinary magnetoelectric materials cannot be used. On the other hand, newly developed "perfect" bi-anisotropic non-reciprocal magnetoelectric metamaterials should be capable of emulating the physics of warp drive gradually accelerating up to 1/4c.

Igor I. Smolyaninov

2011-08-11T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

The Casimir warp drive:Is the Casimir Effect a valid candidate to generate and sustain a Natario warp drive spacetime bubble??  

E-Print Network [OSTI]

The Casimir warp drive:Is the Casimir Effect a valid candidate to generate and sustain a Natario warp drive spacetime bubble?? Fernando Loup Residencia de Estudantes Universitas Lisboa Portugal April 21, 2014 Abstract Warp Drives are solutions of the Einstein Field Equations that allows superluminal

Paris-Sud XI, Université de

342

Progress in Direct-Drive Inertial Confinement Fusion  

SciTech Connect (OSTI)

Recent progress in direct-drive inertial confinement fusion research at LLE using the 60-beam, 30-kJUV OMEGA laser system and cryogenic target capability to perform ignition-scaled implosions will be reported. In addition, a new high-energy (2.6-kJ) petawatt capability is currently under construction.

Meyerhofer,D.D.

2004-12-17T23:59:59.000Z

343

Assistive listening devices drive neuroplasticity in children with dyslexia  

E-Print Network [OSTI]

Assistive listening devices drive neuroplasticity in children with dyslexia Jane Hornickela Jolla, CA, and approved August 3, 2012 (received for review April 23, 2012) Children with dyslexia often on auditory neurophysiology and reading skills in children with dyslexia. FM system use reduced

344

Kelly Services 1600 Valley River Drive, Suite 170  

E-Print Network [OSTI]

Kelly Services® 1600 Valley River Drive, Suite 170 Eugene, OR 97401 Phone: 541.687.9558 Fax: 541 put them on our payroll Experience 1946 ­ Present Kelly Services, Troy, MI We are a global, single to achieve results. We transform workforce challenges into opportunities. 1957 ­ Present Kelly Services

Oregon, University of

345

Thermal Issues in Disk Drive Design: Challenges and Possible Solutions  

E-Print Network [OSTI]

are to adhere to the thermal design envelope. We motivate the need for continued improvements in IDR by showing throttles its activities to remain within the thermal envelope. Categories and Subject Descriptors: B.4Thermal Issues in Disk Drive Design: Challenges and Possible Solutions SUDHANVA GURUMURTHI

Gurumurthi, Sudhanva

346

IPAS exists to deliver breakthrough science, drive innovation and thus  

E-Print Network [OSTI]

IPAS exists to deliver breakthrough science, drive innovation and thus enable illuminated decision making for a safer, healthier & wealthier world #12;Director's Welcome Our vision is to make IPAS from many areas of science. IPAS has been created to bring together physicists, chemists and biologists

347

Project Information Form Project Title Eco-Driving for Transit  

E-Print Network [OSTI]

Provided (by each agency or organization) DOT - $54,871.35 Total Project Cost $54,871.35 Agency IDProject Information Form Project Title Eco-Driving for Transit University Georgia Institute Project Second-by-second data for school buses, MARTA transit buses, and GRTA express buses

California at Davis, University of

348

Fast wave current drive in DIII-D  

SciTech Connect (OSTI)

The non-inductive current drive from fast Alfven waves launched by a directional four-element antenna was measured in the DIII-D tokamak. The fast wave frequency (60 MHz) was eight times the deuterium cyclotron frequency at the plasma center. An array of rf pickup loops at several locations around the torus was used to verify the directivity of the four-element antenna. Complete non-inductive current drive was achieved using a combination of fast wave current drive (FWCD) and electron cyclotron current drive (ECCD) in discharges for which the total plasma current was inductively ramped down from 400 to 170 kA. For discharges with steady plasma current, up to 110 kA of FWCD was inferred from an analysis of the loop voltage, with a maximum non-inductive current (FWCD, ECCD, and bootstrap) of 195 out of 310 kA. The FWCD efficiency increased linearly with central electron temperature. For low current discharges, the FWCD efficiency was degraded due to incomplete fast wave damping. The experimental FWCD was found to agree with predictions from the CURRAY ray-tracing code only when a parasitic loss of 4% per pass was included in the modeling along with multiple pass damping.

Petty, C.C.; Callis, R.W.; Chiu, S.C.; deGrassie, J.S.; Forest, C.B.; Freeman, R.L.; Gohil, P.; Harvey, R.W.; Ikezi, H.; Lin-Liu, Y.-R. [and others

1995-02-01T23:59:59.000Z

349

2006-2007 Research Report 57 Campus Drive  

E-Print Network [OSTI]

and Processing, Transport, Electrical Energy and Utilization ........................................... 25 4;#12;2006-2007 Research Report http:// www.engr.usask.ca/research/index.php?cmd=tree_nodeID22 57 Campus Drive Saskatoon-processing ................ 11 2. Environment, Infrastructure and Sustainable Development ....... 17 3. Energy: Production

Saskatchewan, University of

350

2005-2006 Research Report 57 Campus Drive  

E-Print Network [OSTI]

and Processing, Transport, Electrical Energy and Utilization ........................................... 25 4;#12;2005-2006 Research Report http:// www.engr.usask.ca/research/index.php?cmd=tree_nodeID22 57 Campus Drive Saskatoon-processing ................ 11 2. Environment, Infrastructure and Sustainable Development ....... 17 3. Energy: Production

Saskatchewan, University of

351

Global biofuel drive raises risk of eviction for African farmers  

E-Print Network [OSTI]

Global biofuel drive raises risk of eviction for African farmers African farmers risk being forced from their lands by investors or government projects as global demand for biofuels encourages changes at risk if African farmland is turned over to growing crops for biofuel. With growing pressure to find

352

Electric Drive Vehicles: A Huge New Distributed Energy Resource  

E-Print Network [OSTI]

with electric power generation and storage capabilities · Three Vehicle Types in Program ­ Full ZEV: true zero) #12;Electric Drive in Vehicles -- All the Ingredients for a Distributed Power System #12;Vehicle and energy storage potential · Electric vehicle charge stations: grid connection points for power

Firestone, Jeremy

353

College of Communication & Information 1345 Circle Park Drive | Suite 302  

E-Print Network [OSTI]

College of Communication & Information 1345 Circle Park Drive | Suite 302 Knoxville, TN 37996 & Communication Studies (CICS) - Awarded grants total $7 million +, NSF, IMLS, Sloan Foundation and more - 2.5+ million in science information and communication contract work at Oak Ridge National Labs. · Hands

Grissino-Mayer, Henri D.

354

Control of the Lamb shift by a driving field  

E-Print Network [OSTI]

A unitary transformation approach is used to study the energy level shift of the atom coupled to both a vacuum electromagnetic field and a driving laser. The Lamb shift of the energy levels is shown to depend on the Rabi frequency and the detuning...

Yang, Shuai; Zheng, Hang; Hong, Ran; Zhu, Shi-Yao; Zubairy, M. Suhail

2010-01-01T23:59:59.000Z

355

Driving Pattern Recognition for Control of Hybrid Electric Trucks  

E-Print Network [OSTI]

Driving Pattern Recognition for Control of Hybrid Electric Trucks CHAN-CHIAO LIN1 , SOONIL JEON2 strategy is to minimize fuel consumption and engine-out NOx and PM emissions on a set of diversified trucks. The 21st Century Truck program in the US, spearheaded by two government agencies, Department

Peng, Huei

356

How to Avoid Overestimating Variable Speed Drive Savings  

E-Print Network [OSTI]

in fan efficiency. 5. Account for decreases in motor efficiency at part load, particularly for smaller motors below about 35 percent load. 6. Recognize that existing part load controls may be more efficient than expected. 7. Account for drive losses. 8...

Maxwell, J. B.

2005-01-01T23:59:59.000Z

357

Transport Research Arena Europe 2010, Brussels Towards Highly Automated Driving  

E-Print Network [OSTI]

of HAVEit is to develop and investigate vehicle automation beyond ADAS systems, especially highly automated automated vehicles In 2010, two lines of research and development exist in the domain of ground vehicle automation: Either the automation is driving the vehicle fully automated without a human driver

Paris-Sud XI, Université de

358

In his recently published book Driving Detroit: The Quest  

E-Print Network [OSTI]

changed by three forces: an unplanned, speculation-driven housing development system; dependency. Throughout Driving Detroit, Detroiters tell their stories in songs, poems and oral histories, offering and management,describes his WSU playing field with the precision of an engineer:"More than 120 buildings,12

Baskaran, Mark

359

Developing a 3D Sound Environment for a Driving Simulator  

E-Print Network [OSTI]

squealing of a human-controlled vehicle, and the engine noise of autonomous vehicles. Both the engine of a police vehicle using the Doppler Effect. Other sounds such as vehicle wind noise, beeping of the vehicle. Introduction Sound plays an important role in the realm of driving. Wind and engine noise contribute to fatigue

360

innovati nWind Turbine Design Innovations Drive Industry Transformation  

E-Print Network [OSTI]

innovati nWind Turbine Design Innovations Drive Industry Transformation For more than 20 years. Tackling Turbine Blade Inefficiencies In 1984, NREL researchers began investigating problems with wind turbine blade designs. Inefficiency was a significant barrier to lowering the cost of wind energy

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Physical model of a hybrid electric drive train  

E-Print Network [OSTI]

A motor and flywheel system was designed to simulate the dynamics of the electric drive train and inertial mass of a hybrid electric vehicle. The model will serve as a test bed for students in 2.672 to study the energy ...

Young, Brady W. (Brady William)

2006-01-01T23:59:59.000Z

362

Ecological factors and human threats both drive wildfowl population declines  

E-Print Network [OSTI]

; human population density. Correspondence Peter R. Long, Department of Biology and Biochemistry, Africa and Asia. Second, we use phylogenetic comparative analyses to test whether population size, globalEcological factors and human threats both drive wildfowl population declines P. R. Long1 , T. Sz

363

An Optimization Model for Eco-Driving at Signalized Intersection  

E-Print Network [OSTI]

strategy which aims to reduce exclusive fuel consumption and emissions by modifying or optimizing drivers’ behaviors. With the help of vehicle-to-vehicle (V2V) communication and vehicle-to-infrastructure communication (V2I), eco-driving could utilize...

Chen, Zhi

2013-07-15T23:59:59.000Z

364

Driving Resource Management With ApplicationLevel Quality of Service  

E-Print Network [OSTI]

Driving Resource Management With Application­Level Quality of Service Specifications Michael J­driven approach to resource management to support quality of service. We present our general strategy, the design resource management. Appeared in Decision Support Systems Journal, Volume 28, Elsevier Science Press, 2000

Katchabaw, Michael James

365

ENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive  

E-Print Network [OSTI]

, Operations Support Exelon Nuclear Warrenville, Illinois Brian J. Rauch Vice President, Engineering John DeereENGINEERS' DAY 2011 ACTIVITIES 1800 Engineering Hall, 1415 Engineering Drive 5:30 SOCIAL HOUR · Distinguished Achievement Awards · Early-Career Achievement Award · College of Engineering faculty and staff

Sheridan, Jennifer

366

Driving down corporate carbon emissions through sustainable property management  

E-Print Network [OSTI]

Driving down corporate carbon emissions through sustainable property management Challenge Many organisations are facing increasing cost challenges and pressure to reduce their carbon dioxide (CO2) emissions consideration is the carbon dioxide emissions per square metre of floor space. While an important metric

367

PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D  

SciTech Connect (OSTI)

OAK A271 PHYSICS OF ELCTRON CYCLOTRON CURRENT DRIVE ON DIII-D. Recent experiments on the DIII-D tokamak have focused on determining the effect of trapped particles on the electron cyclotron current drive (ECCD) efficiency. The measured ECCD efficiency increases as the deposition location is moved towards the inboard midplane or towards smaller minor radius for both co and counter injection. The measured ECCD efficiency also increases with increasing electron density and/or temperature. The experimental ECCD is compared to both the linear theory (Toray-GA) as well as a quasilinear Fokker-Planck model (CQL3D). The experimental ECCD is found to be in better agreement with the more complete Fokker-Planck calculation, especially for cases of high rf power density and/or loop voltage. The narrow width of the measured ECCD profile is consistent with only low levels of radial transport for the current carrying electrons.

PETTY,CC; PRATER,R; LUCE,TC; ELLIS,RA; HARVEY,RW; KINSEY,JE; LAO,LL; LOHR,J; MAKOWSKI,MA

2002-09-01T23:59:59.000Z

368

Bailer for top head drive rotary well drills  

SciTech Connect (OSTI)

A bailer mounted to the derrick of a top head drive well drilling rig is described. The bailer includes a winch line drum mounted by a bracket to the derrick. A positive displacement hydraulic motor mounts one end of the drum and receives fluid under pressure from the existing hydraulic pressure supply. Valving is provided to allow reverse operation of the motor so equipment can either be raised or lowered relative to the derrick. The hydraulic delivery line to the motor includes a one way restrictor that will allow relatively free passage of fluid to the motor in a driving or lifting mode but will reverse flow of fluid from the motor, thereby affording a braking effect for lowering a load at a selected rate.

Bartholomew, L.

1980-09-23T23:59:59.000Z

369

Conformal Gravity and the Alcubierre Warp Drive Metric  

E-Print Network [OSTI]

We present an analysis of the classic Alcubierre metric based on conformal gravity, rather than standard general relativity. The main characteristics of the resulting warp drive remain the same as in the original study by Alcubierre, namely that effective super-luminal motion is a viable outcome of the metric. We show that for particular choices of the shaping function, the Alcubierre metric in the context of conformal gravity does not violate the weak energy condition, as was the case of the original solution. In particular, the resulting warp drive does not require the use of exotic matter. Therefore, if conformal gravity is a correct extension of general relativity, super-luminal motion via an Alcubierre metric might be a realistic solution, thus allowing faster-than-light interstellar travel.

Varieschi, Gabriele U

2012-01-01T23:59:59.000Z

370

On the impossibility of superluminal travel: the warp drive lesson  

E-Print Network [OSTI]

The question of whether it is possible or not to surpass the speed of light is already centennial. The special theory of relativity took the existence of a speed limit as a principle, the light postulate, which has proven to be enormously predictive. Here we discuss some of its twists and turns when general relativity and quantum mechanics come into play. In particular, we discuss one of the most interesting proposals for faster than light travel: warp drives. Even if one succeeded in creating such spacetime structures, it would be still necessary to check whether they would survive to the switching on of quantum matter effects. Here, we show that the quantum back-reaction to warp-drive geometries, created out of an initially flat spacetime, inevitably lead to their destabilization whenever superluminal speeds are attained. We close this investigation speculating the possible significance of this further success of the speed of light postulate.

Carlos Barceló; Stefano Finazzi; Stefano Liberati

2010-01-27T23:59:59.000Z

371

Conformal Gravity and the Alcubierre Warp Drive Metric  

E-Print Network [OSTI]

We present an analysis of the classic Alcubierre metric based on conformal gravity, rather than standard general relativity. The main characteristics of the resulting warp drive remain the same as in the original study by Alcubierre, namely that effective super-luminal motion is a viable outcome of the metric. We show that for particular choices of the shaping function, the Alcubierre metric in the context of conformal gravity does not violate the weak energy condition, as was the case of the original solution. In particular, the resulting warp drive does not require the use of exotic matter. Therefore, if conformal gravity is a correct extension of general relativity, super-luminal motion via an Alcubierre metric might be a realistic solution, thus allowing faster-than-light interstellar travel.

Gabriele U. Varieschi; Zily Burstein

2012-08-17T23:59:59.000Z

372

Connecting the Mobile World Drive Train Developments and  

E-Print Network [OSTI]

Cost Power Modules #12;Ve h i c u l a r Te c h n o l o g y S o c i e t y Diesel ICE and MotorConnecting the Mobile World Drive Train Developments and Opportunities: Power Electronics, 2013 Connecting the Mobile World #12;Ve h i c u l a r Te c h n o l o g y S o c i e t y Power EDT

California at Davis, University of

373

Variable Frequency AC Drives for Cooling Tower Energy Efficiency  

E-Print Network [OSTI]

speed fan drives. Fan speed is reduced to yield specific water temperatures at thermal conditions less difficult than design. The reduced air flow is accomplished by reduced fan power consumption, resulting in optimum cooling tower operation... and economics. Automatic fan speed control by sensing cold water temperature is the economic essence of the application of adjustable frequency power to A-C fan motors. 2.2 Cell Partitions In some multi-cell mechanical-draft cooling towers, the isolation...

Corey, R. W.

1982-01-01T23:59:59.000Z

374

MHD simulation of RF current drive in MST  

SciTech Connect (OSTI)

Auxiliary heating and current drive using RF waves such as the electron Bernstein wave (EBW) promises to advance the performance of the reversed field pinch (RFP). In previous computational work [1], a hypothetical edge-localized current drive is shown to suppress the tearing activity which governs the macroscopic transport properties of the RFP. The ideal conditions for tearing stabilization include a reduced toroidal induction, and precise width and radial position of the Gaussian-shaped external current drive. In support of the EBW experiment on the Madison Symmetric Torus, an integrated modeling scheme now incorporates ray tracing and Fokker-Plank predictions of auxiliary current into single fluid MHD. Simulations at low Lundquist number (S ? 10{sup 4}) generally agree with the previous work; significantly more burdensome simulations at MST-like Lundquist number (S ? 3×10{sup 6}) show unexpected results. The effect on nonlinearly saturated current profile by a particular RF-driven external force decreases in magnitude and widens considerably as the Lundquist number increases toward experimental values. Simulations reproduce the periodic current profile relaxation events observed in experiment (sawteeth) in the absence of current profile control. Reduction of the tearing mode amplitudes is still observable; however, reduction is limited to periods between the large bursts of magnetic activity at each sawtooth. The sawtoothing pattern persists with up to 10 MW of externally applied RF power. Periods with prolonged low tearing amplitude are predicted with a combination of external current drive and a reduced toroidal loop voltage, consistent with previous conclusions. Finally, the resistivity profile is observed to have a strong effect on the optimal externally driven current profile for mode stabilization.

Hendries, E. R.; Anderson, J. K.; Forest, C. B.; Reusch, J. A.; Seltzman, A. H.; Sovinec, C. R. [University of Wisconsin, Madison WI (United States); Diem, S. [Oak Ridge National Laboratory, Oak Ridge TN (United States); Harvey, R. W. [CompX, Del Mar, CA (United States)

2014-02-12T23:59:59.000Z

375

Extended cage adjustable speed electric motors and drive packages  

DOE Patents [OSTI]

The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced. 12 figs.

Hsu, J.S.

1999-03-23T23:59:59.000Z

376

Photon tunneling in the warp drive space-time  

E-Print Network [OSTI]

We simplify the warp drive space-time such that it becomes stationary and the distorsion becomes one-dimensional and static. We use this simplified space-time as the classical background space-time for a photon field. The Drummond&Hathrell action is then used in order to investigate the velocity effects on photons tunneling through the space-time distorsion. We speculate on whether or not all tunneling processes with photons induce faster than light effects.

Cramer, C R

1995-01-01T23:59:59.000Z

377

Extended cage adjustable speed electric motors and drive packages  

DOE Patents [OSTI]

The rotor cage of a motor is extended, a second stator is coupled to this extended rotor cage, and the windings have the same number of poles. The motor torque and speed can be controlled by either injecting energy into or extracting energy out from the rotor cage. The motor produces less harmonics than existing doubly-fed motors. Consequently, a new type of low cost, high efficiency drive is produced.

Hsu, John S. (Oak Ridge, TN)

1999-01-01T23:59:59.000Z

378

The Role of the Built Environment in Reducing Driving and  

E-Print Network [OSTI]

Communities Planning Act of 2008 Targets for GHG emissions reduction from cars and trucks for metropolitan Emissions from Driving CO2 = CO2 /gallon x gallons/mile x miles Fuel Vehicle Person #12;SB375 Sustainable% 13% San Diego 7% 13% #12;Annual VMT per Capita in U.S. - 2,000 4,000 6,000 8,000 10,000 12,000 1936

Bustamante, Fabián E.

379

Driving Home to a Clean Energy Future | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit ServicesMirant Potomac River ComplianceCEnergy Driving

380

GIZ Sourcebook Module 4f: Eco Driving | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to: navigation, search Equivalent URIFrontier,Jump to:Wilmette, Jump| Openf: Eco Driving

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

A study of alternative drive control interfaces for next-generation electric vehicles  

E-Print Network [OSTI]

The drive control interface in automobiles has not significantly changed for almost a century. Recent advances in electric vehicles and drive-by-wire technology allow for new alternative interfaces that enable novel vehicle ...

Post, C. Christopher (Charles Christopher)

2011-01-01T23:59:59.000Z

382

High Precision Control of Indirect Drive Systems Based on End-effector Sensor Information  

E-Print Network [OSTI]

Block diagram of a single-joint indirect drive train witha Figure 4.4: Block diagram of a single-joint indirect driveBlock diagram of the control system given in Section 3.6. Single-Joint

Han, Cheng-Huei

2009-01-01T23:59:59.000Z

383

EV Everywhere: Electric Drive Systems Bring Power to Plug-in...  

Broader source: Energy.gov (indexed) [DOE]

Electric Drive Systems Bring Power to Plug-in Electric Vehicles EV Everywhere: Electric Drive Systems Bring Power to Plug-in Electric Vehicles January 31, 2014 - 9:47am Addthis The...

384

Age and cross-cultural comparison of drivers' cognitive workload and performance in simulated urban driving  

E-Print Network [OSTI]

Driving demands significant psychomotor attention and requires even more when drivers are engaged in secondary tasks that increase cognitive workload and divert attention. It is well established that age influences driving ...

Son, J.

385

Measured Savings of DC to AC Drive Retrofit in Plastic Extrusion  

E-Print Network [OSTI]

This paper presents the potential electrical energy efficiency improvements for utilizing alternating current (AC) motors controlled by variable frequency drives (VFD) in place of direct current (DC) motors to drive plastic extrusion machines. A...

Sfeir, R. A.

2008-01-01T23:59:59.000Z

386

Analysis of Battery Wear and V2G Benefits Using Real-world Drive...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Battery Wear and V2G Benefits Using Real-world Drive Cycles and Ambient Data Analysis of Battery Wear and V2G Benefits Using Real-world Drive Cycles and Ambient Data 2011 DOE...

387

US-ABC Collaborates to Lower Cost of Electric Drive Batteries...  

Office of Environmental Management (EM)

US-ABC Collaborates to Lower Cost of Electric Drive Batteries US-ABC Collaborates to Lower Cost of Electric Drive Batteries April 16, 2013 - 12:00am Addthis The U.S. Advanced...

388

CAMPAIGNING, CANVASSING AND PETITION DRIVES ON THE MICHIGAN STATE UNIVERSITY CAMPUS  

E-Print Network [OSTI]

CAMPAIGNING, CANVASSING AND PETITION DRIVES ON THE MICHIGAN STATE UNIVERSITY CAMPUS - GUIDELINES - Michigan State University encourages students to be informed about and participate in the political process campaigning, canvassing and petitioning drives on the Michigan State University campus. These statements

Liu, Taosheng

389

Evaluating Importance Ratings as an Alternative to Mental Models in Predicting Driving Crashes and Moving Violations  

E-Print Network [OSTI]

The present study investigated the extent to which importance ratings (i.e., a measure of perceived importance for driving-related concepts) are a viable alternative to traditional mental model assessment methods in predicting driving performance...

McDonald, Jennifer Nicole

2012-07-16T23:59:59.000Z

390

E-Print Network 3.0 - advanced electrical drives Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Drive Dr. Geng, Hua Postdoc Wind Energy Dr... .D. Wind Energy Popat, Mitesh Ph.D. Alternative Energy (shale oil) Al-Nabi, Ehsan Ph.D. Electric Drive Zhu... , Ning Ph.D....

391

Solar wind driving of magnetospheric ULF waves: Field line resonances driven by dynamic pressure fluctuations  

E-Print Network [OSTI]

Solar wind driving of magnetospheric ULF waves: Field line resonances driven by dynamic pressure observational studies suggest that solar wind dynamic pressure fluctuations can drive magnetosphericFedderMobarry (LFM) global, threedimensional magnetohydrodynamic (MHD) simulations of the solar wind

392

Would You Consider Driving a Vehicle that Can Run on Biodiesel...  

Broader source: Energy.gov (indexed) [DOE]

Would You Consider Driving a Vehicle that Can Run on Biodiesel? Would You Consider Driving a Vehicle that Can Run on Biodiesel? September 16, 2010 - 7:30am Addthis On Monday,...

393

Energy Department Awards $2.2 Million to Drive Innovative Solutions...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Awards 2.2 Million to Drive Innovative Solutions, Lower Costs of Solar Energy Department Awards 2.2 Million to Drive Innovative Solutions, Lower Costs of Solar March 10, 2014 -...

394

Analysis and Simulation of Mechanical Trains Driven by Variable Frequency Drive Systems  

E-Print Network [OSTI]

Induction motors and Variable Frequency Drives (VFDs) are widely used in industry to drive machinery trains. However, some mechanical trains driven by VFD-motor systems have encountered torsional vibration problems. This vibration can induce large...

Han, Xu

2012-02-14T23:59:59.000Z

395

FIELD TEST OF THE WATER-WHEEL IR (WIR) SPECTROMETER ON EVAPORATIVE SALT DEPOSITS AT TIBETAN PLATEAU. P. Sobron, J. J. Freeman, Alian Wang, Dept Earth and Planetary Sciences  

E-Print Network [OSTI]

"contact survey", i.e., to install a WIR unit inside of a well set into the middle wheel of a pla- netary of WIR has a size of 10x7.5x6.5cm, mass of 450 grams, power consump- tion of 4W, and output data through transformed into a rugged, field portable NIR reflectance spectrometer that is able to operate in tough field

396

GPS Data Filtration Method for Drive Cycle Analysis Applications  

SciTech Connect (OSTI)

When employing GPS data acquisition systems to capture vehicle drive-cycle information, a number of errors often appear in the raw data samples, such as sudden signal loss, extraneous or outlying data points, speed drifting, and signal white noise, all of which limit the quality of field data for use in downstream applications. Unaddressed, these errors significantly impact the reliability of source data and limit the effectiveness of traditional drive-cycle analysis approaches and vehicle simulation software. Without reliable speed and time information, the validity of derived metrics for drive cycles, such as acceleration, power, and distance, become questionable. This study explores some of the common sources of error present in raw onboard GPS data and presents a detailed filtering process designed to correct for these issues. Test data from both light and medium/heavy duty applications are examined to illustrate the effectiveness of the proposed filtration process across the range of vehicle vocations. Graphical comparisons of raw and filtered cycles are presented, and statistical analyses are performed to determine the effects of the proposed filtration process on raw data. Finally, an evaluation of the overall benefits of data filtration on raw GPS data and present potential areas for continued research is presented.

Duran, A.; Earleywine, M.

2013-02-01T23:59:59.000Z

397

Disk Drive Roadmap from the Thermal Perspective: A Case for Dynamic Thermal Management  

E-Print Network [OSTI]

to the thermal envelope of drive design. We present two mechanisms for buying back some of this IDR loss allowing higher RPMs than the thermal envelope, and employs dynamic throttling of disk drive activities to remain within this envelope. Keywords: Disk Drives, Thermal Management, Technology Scaling. 1

Gurumurthi, Sudhanva

398

Disk Drive Roadmap from the Thermal Perspective: A Case for Dynamic Thermal Management  

E-Print Network [OSTI]

the thermal envelope, and employs dynamic throttling of disk drive activities to remain within this envelopeDisk Drive Roadmap from the Thermal Perspective: A Case for Dynamic Thermal Management Sudhanva The importance of pushing the performance envelope of disk drives continues to grow, not just in the server

Sivasubramaniam, Anand

399

Power factor correction of an electrical drive system based on multiphase machines  

E-Print Network [OSTI]

Power factor correction of an electrical drive system based on multiphase machines Khoudir MAROUANI_tabache@yahoo.com Abstract--This paper deals with the energy efficiency improvement of an electrical drive which can be used both in wind energy conversion or motor drive applications. A power factor (PF) control scheme

Paris-Sud XI, Université de

400

Specification and Validation of New Control Algorithms for Electric Drives Using SpecC Language  

E-Print Network [OSTI]

Specification and Validation of New Control Algorithms for Electric Drives Using SpecC LanguageC design methodology. Keywords-- Electric Drives, Control, Specification, Validation I. INTRODUCTION Today presentation of the electrical drives and of the SpecC language. Then, we present the specification model

California at Irvine, University of

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Co-Simulation of an Electric Traction Drive Christoph Schulte and Joachim Bocker  

E-Print Network [OSTI]

Co-Simulation of an Electric Traction Drive Christoph Schulte and Joachim B¨ocker Abstract--For the simulation of electrical drives, reduced- order models or simple look-up tables are often used in order) for an electric drive, where the control structure, power electronics and motor are modeled in different environ

Paderborn, Universität

402

ANL/ESD/10-9 Highway Vehicle Electric Drive in the United States  

E-Print Network [OSTI]

ANL/ESD/10-9 Highway Vehicle Electric Drive in the United States: 2009 Status and Issues Energy Laboratory, or UChicago Argonne, LLC. #12;ANL/ESD/10-9 Highway Vehicle Electric Drive in the United States .............................................................................................................. 1 2 STATE OF ELECTRIC DRIVE VEHICLE TECHNOLOGY .......................................... 4 2

Kemner, Ken

403

NREL's Isothermal Battery Calorimeters are Crucial Tools for Advancing Electric-Drive Vehicles  

E-Print Network [OSTI]

NREL's Isothermal Battery Calorimeters are Crucial Tools for Advancing Electric-Drive Vehicles, and plug-in hybrids. But before more Americans switch to electric-drive vehicles, automakers need batteries to the safety and performance of electric-drive batteries. The innovative Isothermal Battery Calorimeters (IBCs

404

Kandler Smith, NREL EDV Battery Robust Design -1 Design of Electric Drive Vehicle  

E-Print Network [OSTI]

Kandler Smith, NREL EDV Battery Robust Design - 1 Design of Electric Drive Vehicle Batteries for battery aging · Worst-case duty cycles and environments drive the need to oversize batteries · Systems with vehicle simulations under realistic driving cycles and environments ASTR 2010 Oct 6 ­ 8, Denver. Colorado

405

Specification and Validation of New Control Algorithms for Electric Drives using SpecC Language  

E-Print Network [OSTI]

Specification and Validation of New Control Algorithms for Electric Drives using SpecC Language://www.cecs.uci.edu/~gajski #12;Specification and Validation of New Control Algorithms for Electric Drives using SpecC Language://www.cecs.uci.edu/~gajski Abstract Today, the shortest time-to-market in the electric drives industries is being a pressing

California at Irvine, University of

406

Neuro-Fuzzy Controller of a Sensorless PM Motor Drive For Washing Machines  

E-Print Network [OSTI]

Neuro-Fuzzy Controller of a Sensorless PM Motor Drive For Washing Machines Kasim M. Al towards the adoption of direct drive washing machines utilizing PM motors is increasing due and performance of a sensorless PM motor drive for washing machines. An implicit rotor position detection unit

407

Power Electronics and Electrical Drives Prof. Dr.-Ing. Joachim Bcker  

E-Print Network [OSTI]

vehiclesElectric vehicles RailCab Power Electronics Switched-mode power supplies High efficiency Drives and Electric Vehicles Power Electronics and Electrical Drives 5 Prof. Dr.-Ing. Joachim BöckerPower Electronics and Electrical Drives Prof. Dr.-Ing. Joachim Böcker Research Topics Mechatronic

Hellebrand, Sybille

408

Drive actuation in active control of centrifugal compressors Jan Tommy Gravdahl and Olav Egeland  

E-Print Network [OSTI]

Drive actuation in active control of centrifugal compressors Jan Tommy Gravdahl and Olav Egeland-1375 Billingstad NORWAY CompressorShaft Electric drive Active surge control law Shaft speed Compressor performance control Figure 1: Active surge control using drive 1 Introduction Traditionally, centrifugal

Gravdahl, Jan Tommy

409

Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive Trains  

E-Print Network [OSTI]

Control Realization for an Interior Permanent Magnet Synchronous Motor (IPMSM) in Automotive Drive Trains Wilhelm Peters, Tobias Huber, Joachim Böcker Power Electronics and Electrical Drives, Paderborn automotive traction drives are a wide speed range, a wide constant-power operation range and high efficiency

Paderborn, Universität

410

The Design of a Novel Prismatic Drive for a Three-DOF Parallel-Kinematics Machine  

E-Print Network [OSTI]

The Design of a Novel Prismatic Drive for a Three-DOF Parallel-Kinematics Machine D. Chablat1 , J.Chablat@irccyn.ec-nantes.fr angeles@cim.mcgill.ca April 7, 2011 Abstract The design of a novel prismatic drive is reported on a common translating follower. The design of Slide-o-Cam was reported elsewhere. This drive thus provides

Boyer, Edmond

411

Al-Shihabi and Mourant 1 Toward More Realistic Driving Behavior Models for Autonomous  

E-Print Network [OSTI]

Al-Shihabi and Mourant 1 Toward More Realistic Driving Behavior Models for Autonomous Vehicles * 250) = 7,474 #12;Al-Shihabi and Mourant 2 Toward More Realistic Driving Behavior Models for Autonomous Vehicles in Driving Simulators ABSTRACT Autonomous vehicles are one of the most, if not the most

412

Direct-Drive Inertial Confinement Fusion Research at the Laboratory for Laser Energetics  

E-Print Network [OSTI]

beams Relative size 240 ft National Ignition Facility (NIF) 1.8 MJ 192 beams NIF The National Ignition (NIF) is predicted to achieve high-gain (~40). · Direct drive targets are predicted to ignite on the NIF while it is in x-ray-drive configuration with polar direct drive (PDD). · Fully integrated fast

413

Testing Small Wind Turbine Generators: Design of a Driving Dynamometer Stephen Rehmeyer Pepe  

E-Print Network [OSTI]

Testing Small Wind Turbine Generators: Design of a Driving Dynamometer by Stephen Rehmeyer Pepe Sc, Berkeley Spring 2007 #12;Testing Small Wind Turbine Generators: Design of a Driving Dynamometer Copyright c 2007 by Stephen Rehmeyer Pepe #12;Abstract Testing Small Wind Turbine Generators: Design of a Driving

Kammen, Daniel M.

414

Driving Smart Growth: Electric Vehicle Adoption and OffPeak Electricity Rates  

E-Print Network [OSTI]

Driving Smart Growth: Electric Vehicle Adoption and OffPeak Electricity Rates Peter Driving Smart Growth: Electric Vehicle Adoption Page 2 Executive Summary Reducing our dependence to electric vehicles (EVs)1 is core to reducing reliance on fossil fuels and driving smart growth

Holsinger, Kent

415

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and  

E-Print Network [OSTI]

Engineering Dr. Madison, WI 53706 #12;IEEE 2005 International Electric Machines and Drives Conference (IEMDC on the induction machine performance characteristics, but the presence of an LC filter in the drive's input2005-07 Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input

Lipo, Thomas

416

Can The Natario Warp Drive Explain The OPERA Superluminal Neutrino At CERN??  

E-Print Network [OSTI]

Can The Natario Warp Drive Explain The OPERA Superluminal Neutrino At CERN?? Fernando Loup of the micro Warp Drive:Microscopical particle-sized Warp Bubbles carrying inside sub-atomic particles Universe after the Big Bang and they used the Alcubierre Warp Drive geometry in their mathematical model

Paris-Sud XI, Université de

417

The Alcubierre Warp Drive using Lorentz Boosts according to the Harold White Spacetime Metric potential .  

E-Print Network [OSTI]

The Alcubierre Warp Drive using Lorentz Boosts according to the Harold White Spacetime Metric potential . Fernando Loup Daniel Rocha December 23, 2012 Abstract Warp Drives are solutions Alcubierre warp drive seems to be very attractive because allows interstellar space travel at arbitrarily

Paris-Sud XI, Université de

418

The Ford-Pfenning Quantum Inequalities(QI) Analysis applied to the Natario Warp Drive Spacetime.  

E-Print Network [OSTI]

The Ford-Pfenning Quantum Inequalities(QI) Analysis applied to the Natario Warp Drive Spacetime. Fernando Loup Residencia de Estudantes Universitas Lisboa Portugal October 15, 2012 Abstract Warp Drives Relativity. There are at the present moment two known solutions: The Alcubierre warp drive discovered in 1994

Paris-Sud XI, Université de

419

An On-line Method for Stator Fault Detection in Multi-phase PMSM Drives  

E-Print Network [OSTI]

An On-line Method for Stator Fault Detection in Multi-phase PMSM Drives Fabien Meinguet*, Eric deals with an on-line fault detection method for multi-phase PMSM drives. The method is based an original method for detecting an abnormal asymmetrical behavior in five-phase PMSM drives and we apply

Paris-Sud XI, Université de

420

Drive-bys and Trade-ups: The Impact of Crime on Residential Mobility Patterns in Los Angeles  

E-Print Network [OSTI]

ed. Sage. Drive-bys and Trade-ups Flippen, Chenoa. 2004. "6):975-994. Drive-bys and Trade-ups Massey, Douglas S. , and802. Drive-bys and Trade-ups Sampson, Robert J. , Jeffrey D.

Hipp, John R; Tita, George E; Greenbaum, Robert T

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Tensiometer, drive probe for use with environmental testing equipment, and methods of inserting environmental testing equipment into a sample  

DOE Patents [OSTI]

A method of inserting a tensiometer into a sample, comprises providing a drive probe configured to be engaged by direct push equipment; supporting a porous member from the drive probe; and driving the drive probe into the sample using a cone penetrometer. A tensiometer comprises a drive probe configured to be engaged by direct push equipment or a cone penetrometer; a porous member supported by the drive probe; and a pressure sensor in pressure sensing relation to the porous member.

Hubbell, Joel M.; Sisson, James B.

2005-07-26T23:59:59.000Z

422

Linear hydraulic drive system for a Stirling engine  

DOE Patents [OSTI]

A hydraulic drive system operating from the periodic pressure wave produced by a Stirling engine along a first axis thereof and effecting transfer of power from the Stirling engine to a load apparatus therefor and wherein the movable, or working member of the load apparatus is reciprocatingly driven along an axis substantially at right angles to the first axis to achieve an arrangement of a Stirling engine and load apparatus assembly which is much shorter and the components of the load apparatus more readily accessible.

Walsh, Michael M. (Schenectady, NY)

1984-02-21T23:59:59.000Z

423

Validity and limitations of gas-drive relative permeability measurement  

E-Print Network [OSTI]

. It was found that the K /K g 0 calculated from the gas-drive data, neglecting capillary pressure gradients, could be in error by more than 100 percent of the true values if the flow rates were not high enough to minimize the effect iv of capillary.... g 0 Ie In the literature of petroleum technology, Wyckoff, et al. , were among the first to develop the relative permeability concept and to show experimentally that oil, gas, and water can flow simultaneously through a porous medium in a precise...

Gupta, Anand Kumar

1971-01-01T23:59:59.000Z

424

A `warp drive' with more reasonable total energy requirements  

E-Print Network [OSTI]

I show how a minor modification of the Alcubierre geometry can dramatically improve the total energy requirements for a `warp bubble' that can be used to transport macroscopic objects. A spacetime is presented for which the total negative mass needed is of the order of a few solar masses, accompanied by a comparable amount of positive energy. This puts the warp drive in the mass scale of large traversable wormholes. The new geometry satisfies the quantum inequality concerning WEC violations and has the same advantages as the original Alcubierre spacetime.

Chris Van Den Broeck

1999-09-21T23:59:59.000Z

425

The warp drive: hyper-fast travel within general relativity  

E-Print Network [OSTI]

It is shown how, within the framework of general relativity and without the introduction of wormholes, it is possible to modify a spacetime in a way that allows a spaceship to travel with an arbitrarily large speed. By a purely local expansion of spacetime behind the spaceship and an opposite contraction in front of it, motion faster than the speed of light as seen by observers outside the disturbed region is possible. The resulting distortion is reminiscent of the ``warp drive'' of science fiction. However, just as it happens with wormholes, exotic matter will be needed in order to generate a distortion of spacetime like the one discussed here.

Miguel Alcubierre

2000-09-05T23:59:59.000Z

426

Bichromatic Driving of a Solid State Cavity QED System  

E-Print Network [OSTI]

The bichromatic driving of a solid state cavity quantum electrodynamics system is used to probe cavity dressed state transitions and observe coherent interaction between the system and the light field. We theoretically demonstrate the higher order cavity-dressed states, supersplitting, and AC stark shift in a solid state system comprised of a quantum dot strongly coupled to a photonic crystal cavity for on- and far off-resonant cases. For the off-resonant case, phonons mediate off-resonant coupling between the quantum dot and the photonic resonator, a phenomenon unique to solid state cavity quantum electrodynamics.

Alexander Papageorge; Arka Majumdar; Erik D. Kim; Jelena Vuckovic

2011-08-27T23:59:59.000Z

427

Protein folding: A complex potential for the driving force  

E-Print Network [OSTI]

Using the Helmholtz decomposition of the vector field of folding fluxes in a reduced space of collective variables, a potential of the driving force for protein folding is determined. The potential has two components and can be written as a complex function. One component is responsible for the source and sink of the folding flows (representing, respectively, the unfolded states and the native state of the protein), and the other accounts for the vorticity of the flow that is produced at the boundaries of the main flow by the contact of the moving folding "fluid" with the quiescent surroundings. The theoretical consideration is illustrated by calculations for a model $\\beta$-hairpin protein.

Chekmarev, Sergei F

2013-01-01T23:59:59.000Z

428

Electric Drive Transportation Association Conference | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQ Contract ESPC IDIQEnergyGovernment Officials.Electric Drive

429

Do You Drive a Hybrid Electric Vehicle? | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergy CooperationRequirements Matrix U.S. DepartmentBaseloadCenturyDistribution:Drive a Hybrid

430

Airport Drive, Missouri: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergy Information LightningAiken ElectricIncDrive, Missouri: Energy

431

Driving Transformation to Energy Efficient Buildings:Policies and Actions |  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The followingDirect EnergyOrganization ofVirginiaYou areDrive5Open

432

Blood Drive collects 44 units | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareers Apply forBiosurveillance A LosBlood Drive collects 44

433

American Red Cross Blood Drive Hanford Health and Safety Exposition  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone by E-mail ShareRed Cross Blood Drive Hanford Health and Safety

434

System studies of rf current drive for MST  

SciTech Connect (OSTI)

Two rf schemes are being studied on the MST reversed field pinch for their potential in current profile control experiments. MHD modeling has shown that a substantial externally-driven off axis parallel current can improve stability of the dominant core tearing modes. A radially localized axisymmetric population of fast electrons has been observed by SXR emission during LH injection (100kW at 800MHz), and is consistent with CQL3D modeling which predicts a small driven current. Computational work suggests that doubling the input power will statistically improve the LH-induced SXR signal to background ratio, and that about 2MW of injected power (an order of magnitude increase) will drive enough current for stabilization of tearing modes. Additionally, a 1 MW 5.5 GHz electron Bernstein wave (EBW) experiment is under construction, which utilizes a very simple and compact antenna compatible with the demands of the RFP. EBW allows access to electron cyclotron heating and current drive in the overdense plasma. Coupling of the external electromagnetic wave to the EBW has been demonstrated, and initial tests at {approx}100kW power have produced a small, localized xray flux consistent with rf heating and high diffusivity of fast electrons. Computational work is currently underway to answer the very important questions of how much power is required, and what level of electron diffusivity is tolerable, to generate a consequential amount of EBW current.

Anderson, J. K.; Burke, D. R.; Forest, C. B.; Goetz, J. A.; Hendries, E. R.; Seltzman, A. H.; Thomas, M. A. [Department of Physics, University of Wisconsin, Madison, WI (United States); Diem, S. [Oak Ridge National Laboratory, Oak Ridge TN (United States); Harvey, R. W. [CompX, Del Mar, CA (United States); Kaufman, M. C. [Department of Physics, University of Wisconsin, Madison, WI (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States)

2011-12-23T23:59:59.000Z

435

Inflow performance relationships for solution-gas-drive reservoirs  

SciTech Connect (OSTI)

In this theoretical study, a numerical model was used to examine the influence of pressure level and skin factor on the inflow performance relationships (IPR's) of wells producing under solution-gas-drive systems. Examination of the synthetic deliverability curves suggests that the exponent of the deliverability curve is a function of time and that the exponent is usually greater than unity. The implication of this observation to field data is discussed. The accuracy of procedures given in the literature to predict oilwell deliverabilities is also examined. It is shown that these methods can be used to predict future performance provided that the exponent of the deliverability curve is known and that extrapolations over large time ranges are avoided. If single-point tests are used to predict future performance (such tests assume that the exponent of the deliverability curve is constant), then errors in predictions will be minimized. Although relative permeability and fluid property data are required, the Muskat material-balance equation and the assumption that GOR is independent of distance can be used to predict future production rates. This method avoids problems associated with other methods in the literature and always yields reliable results. New methods to modify the IPR curve to incorporate changes in skin factor are presented. A new flow-efficiency definition based on the structure of the deliverability equations for solution-gas-drive reservoirs is proposed. This definition avoids problems that result when the currently available methods are applied to heavily stimulated wells.

Camacho-V, R.G.; Raghavan, R.

1989-05-01T23:59:59.000Z

436

The Alcubierre Warp Drive: On the Matter of Matter  

E-Print Network [OSTI]

The Alcubierre warp drive allows a spaceship to travel at an arbitrarily large global velocity by deforming the spacetime in a bubble around the spaceship. Little is known about the interactions between massive particles and the Alcubierre warp drive, or the effects of an accelerating or decelerating warp bubble. We examine geodesics representative of the paths of null and massive particles with a range of initial velocities from -c to c interacting with an Alcubierre warp bubble travelling at a range of globally subluminal and superluminal velocities on both constant and variable velocity paths. The key results for null particles match what would be expected of massive test particles as they approach +/- c. The increase in energy for massive and null particles is calculated in terms of v_s, the global ship velocity, and v_p, the initial velocity of the particle with respect to the rest frame of the origin/destination of the ship. Particles with positive v_p obtain extremely high energy and velocity and becom...

McMonigal, Brendan; O'Byrne, Philip

2012-01-01T23:59:59.000Z

437

Modular PM Motor Drives for Automotive Traction Applications  

SciTech Connect (OSTI)

This paper presents modular permanent magnet (PM) motor drives for automotive traction applications. A partially modularized drive system consisting of a single PM motor and multiple inverters is described. The motor has multiple three-phase stator winding sets and each winding set is driven with a separate three-phase inverter module. A truly modularized inverter and motor configuration based on an axial-gap PM motor is then introduced, in which identical PM motor modules are mounted on a common shaft and each motor module is powered by a separate inverter module. The advantages of the modular approach for both inverter and motor include: (1) power rating scalability--one design meets different power requirements by simply stacking an adequate number of modules, thus avoiding redesigning and reducing the development cost, (2) increased fault tolerance, and (3) easy repairing. A prototype was constructed by using two inverters and an axial-gap PM motor with two sets of three-phase stat or windings, and it is used to assist the diesel engine in a hybrid electric vehicle converted from a Chevrolet Suburban. The effect of different pulse-width-modulation strategies for both motoring and regenerative modes on current control is analyzed. Torque and regenerative control algorithms are implemented with a digital signal processor. Analytical and initial testing results are included in the paper.

Su, G.J.

2001-10-29T23:59:59.000Z

438

Penetration of lower hybrid current drive waves in tokamaks  

SciTech Connect (OSTI)

Lower hybrid (LH) ray propagation in toroidal plasma is shown to be controlled by combination of the azimuthal spectrum launched by the antenna, the poloidal variation of the magnetic field, and the scattering of the waves by the drift wave fluctuations. The width of the poloidal and radial radio frequency wave spectrum increases rapidly as the rays penetrate into higher density and scatter from the drift waves. The electron temperature gradient (ETG) spectrum is particularly effective in scattering the LH waves due to its comparable wavelengths and phase velocities. ETG turbulence is also driven by the radial gradient of the electron current profile giving rise to an anomalous viscosity spreading the LH driven plasma currents. The LH wave scattering is derived from a Fokker-Planck equation for the distribution of the ray trajectories with diffusivities derived from the drift wave fluctuations. The condition for chaotic diffusion for the rays is derived. The evolution of the poloidal and radial mode number spectrum of the lower hybrid waves are both on the antenna spectrum and the spectrum of the drift waves. Antennas launching higher poloidal mode number spectra drive off-axis current density profiles producing negative central shear [RS] plasmas with improved thermal confinement from ETG transport. Core plasma current drive requires antennas with low azimuthal mode spectra peaked at m = 0 azimuthal mode numbers.

Horton, W. [The University of Texas at Austin, Austin, Texas 78712 (United States) [The University of Texas at Austin, Austin, Texas 78712 (United States); Aix-Marseille University, 58, Bd Charles Livon, 13284 Marseille (France); Goniche, M.; Peysson, Y.; Decker, J.; Ekedahl, A.; Litaudon, X. [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France)] [CEA, IRFM, F-13108 Saint-Paul-Lez Durance (France)

2013-11-15T23:59:59.000Z

439

2005 IEEE Systems, Man, and Cybernetics Conference Proceedings, October 2005, Hawaii, USA Mars Exploration Rover Surface Operations: Driving  

E-Print Network [OSTI]

centimeter ground clearance, and large solar panels on the top of the rover require additional clearance to tall rocks (60 centime- ters from ground to solar panel). Wheel baseline is roughly 1 meter side studied it for six months. Then it went to examine the heat shield that had protected Opportu- nity during

440

The analysis of Lobo and Visser applied to both Natario and Casimir warp drives. Physical reactions of gravitational repulsive behavior  

E-Print Network [OSTI]

The analysis of Lobo and Visser applied to both Natario and Casimir warp drives. Physical reactions of General Relativity. There are at the present moment two known solutions: The Alcubierre warp drive discovered in 1994 and the Natario warp drive discovered in 2001. The major drawback concerning warp drives

Boyer, Edmond

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Ford-Pfenning Quantum Inequalities(QI) in the Natario Warp Drive Spacetime using the Planck Length Scale.  

E-Print Network [OSTI]

Ford-Pfenning Quantum Inequalities(QI) in the Natario Warp Drive Spacetime using the Planck Length Warp Drives are solutions of the Einstein Field Equations that allows superluminal travel within drive discovered in 1994 and the Natario warp drive discovered in 2001. However as stated by both

Paris-Sud XI, Université de

442

Numerical Integration of the Negative Energy Density in the Natario Warp Drive Spacetime using 3 different Natario Shape Functions  

E-Print Network [OSTI]

Numerical Integration of the Negative Energy Density in the Natario Warp Drive Spacetime using 3 6, 2013 Abstract Warp Drives are solutions of the Einstein Field Equations that allows superluminal: The Alcubierre warp drive discovered in 1994 and the Natario warp drive discovered in 2001. However as stated

Paris-Sud XI, Université de

443

Heel and toe driving on fuel cell vehicle  

DOE Patents [OSTI]

A system and method for providing nearly instantaneous power in a fuel cell vehicle. The method includes monitoring the brake pedal angle and the accelerator pedal angle of the vehicle, and if the vehicle driver is pressing both the brake pedal and the accelerator pedal at the same time and the vehicle is in a drive gear, activating a heel and toe mode. When the heel and toe mode is activated, the speed of a cathode compressor is increased to a predetermined speed set-point, which is higher than the normal compressor speed for the pedal position. Thus, when the vehicle brake is removed, the compressor speed is high enough to provide enough air to the cathode, so that the stack can generate nearly immediate power.

Choi, Tayoung; Chen, Dongmei

2012-12-11T23:59:59.000Z

444

Improvements in EMC performance of inverter-fed motor drives  

SciTech Connect (OSTI)

An experimental investigation of conducted radio-noise emission from a conventional pulse width modulated (PWM) inverter of medium power feeding an induction motor is described. It is determined that the inverter system generates considerable impulse currents through the power leads feeding the system resulting in serious conducted electromagnetic interference (EMI) problems and significant voltage waveform distortion in the power system. The dominant emission sources in the system are identified. A proposed model of the drive system for the purpose of evaluation of EMI are developed. Several low-cost strategies for improvement in EMC performance of the PWM inverter are then proposed. Experimental results demonstrate that disturbance from the modified system can be dramatically reduced and that the EMC performance of the system has come very close to meeting the IEC CISPR and FCC limits on conducted emissions for digital devices.

Zhong, E.; Lipo, T.A. [Univ. of Wisconsin, Madison, WI (United States). Dept. of Electrical and Computer Engineering

1995-11-01T23:59:59.000Z

445

Payback enormous for variable-frequency motor drives  

SciTech Connect (OSTI)

The City Utilities of Springfield's (Mo) 200-MW Southwest power station is a 200-MW plant anchored around a single coal-fired steam generator and its major support systems, including an electrostatic precipitator (ESP) and two wet limestone scrubbers. In the late 1980s, engineers at Southwest began evaluating the feasibility of installing variable-frequency drives (VFD) to reduce the plant's parasitic load and boost overall performance. This article reports on VFDs installed to control the induced draft (i-d) and forced-draft (f-d) fan motors at the plant. The devices have surpassed the utility's expectations by reducing parasitic load, improving combustion control, and increasing overall plant reliability. Virtually every major plant component--including the ESPs and scrubbers--performs better as a result of the retrofit.

Collins, S.

1993-02-01T23:59:59.000Z

446

Can Protostellar Jets Drive Supersonic Turbulence in Molecular Clouds?  

E-Print Network [OSTI]

Jets and outflows from young stellar objects are proposed candidates to drive supersonic turbulence in molecular clouds. Here, we present the results from multi-dimensional jet simulations where we investigate in detail the energy and momentum deposition from jets into their surrounding environment and quantify the character of the excited turbulence with velocity probability density functions. Our study include jet--clump interaction, transient jets, and magnetised jets. We find that collimated supersonic jets do not excite supersonic motions far from the vicinity of the jet. Supersonic fluctuations are damped quickly and do not spread into the parent cloud. Instead subsonic, non-compressional modes occupy most of the excited volume. This is a generic feature which can not be fully circumvented by overdense jets or magnetic fields. Nevertheless, jets are able to leave strong imprints in their cloud structure and can disrupt dense clumps. Our results question the ability of collimated jets to sustain supersonic turbulence in molecular clouds.

Robi Banerjee; Ralf S. Klessen; Christian Fendt

2007-06-25T23:59:59.000Z

447

Drive reinforcement neural networks for reactor control. Final report  

SciTech Connect (OSTI)

In view of the loss of the third year funding, the scope of the project goals has been revised. The revision in project scope no longer allows for the detailed modeling of the EBR-11 start-up task that was originally envisaged. The authors are continuing, however, to model the control of the rapid power ascent of the University of Arizona TRIGA reactor using a model-based controller and using a drive reinforcement neural network. These will be combined during the concluding period of the project into a hierarchical control architecture. In addition, the modeling of a PWR feedwater heater has continued, and an autonomous fault-tolerant software architecture for its control has been proposed.

Williams, J.G.; Jouse, W.C.

1995-02-01T23:59:59.000Z

448

Veeco Develops Tools to Drive Down HBLED Costs  

Broader source: Energy.gov [DOE]

Veeco is working in partnership with Sandia National Laboratories and Philips Lumileds to drive down the cost of high-brightness LEDs by implementing process simulation tools and by improving temperature measurement and control methods to increase MOCVD yield. Veeco is working with Sandia to reduce the cost of ownership (COO) of the deposition equipment by, for example, using a heated flow flange, which reduces the consumption of the expensive precursors (ammonia, nitrogen, hydrogen, and the metal organics) by 40 percent. Two different types of pyrometers developed by Sandia and Veeco are being tested by Philips Lumileds to control the substrate temperature, which helps determine the color of the LED. If all works according to plan, the COO will be reduced by at least 75 percent by improving throughput, growth uniformity, yield, and temperature stabilization.

449

Consensus formation: The case of using cell phones while driving  

E-Print Network [OSTI]

Several models (including the widely used Sznajd model) have been proposed in order to describe the social phenomenon of consensus formation. The objective of the present paper is to supplement the simulations based on these models with a ``real world simulation''; it considers a situation which can be considered as an ideal laboratory for analyzing consensus formation, namely the authorization or prohibition of using cell phones while driving. This is a convenient laboratory for several reasons (i) The issue was raised in similar terms in all industrialized countries, a circumstance that facilitates comparative analysis by providing a {\\it set of observations} (as opposed to single observations generated, for instance, in election contests). (ii) This is a situation where we happen to know the rule a ``rational'' agent should follow. (iii) Because the issue is a matter of life and death, the phenomenon can be considered as fairly robust with respect to various, endogenous or exogenous, sources of noise. (iv)...

Röhner, B M

2005-01-01T23:59:59.000Z

450

Rim-drive cable-aligned heliostat collector system  

DOE Patents [OSTI]

Disclosed is a heliostat collector apparatus comprising at least one heliostat suspended from a plurality of longitudinally extending linkage means. An enclosure structure is disposed adjacent the heliostat and provides a means for allowing the heliostat to be substantially protected from weathering. A first drive means is operatively connected to the heliostat to effect steering thereof in at least one of first and second predetermined directions. Finally, a frame member is adapted for supporting the heliostat at an inner portion thereof. The frame includes a plurality of outer expandable portions. Each one of the expandable portions is adapted to slidably engage a corresponding one of the plurality of linkage means. The expandable portions are further adapted to allow the heliostat to be slidably moved along the linkage means in directions away from and towards the enclosure structure and to substantially reduce stress acting on the heliostat during steering.

Dolan, J.E.; Sands, T.D.

1982-09-30T23:59:59.000Z

451

Compact vehicle drive module having improved thermal control  

DOE Patents [OSTI]

An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support, which may be controlled in a closed-loop manner. Interfacing between circuits, circuit mounting structure, and the support provide for greatly enhanced cooling. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Meyer, Andreas A.; Radosevich, Lawrence D.; Beihoff, Bruce C.; Kehl, Dennis L.; Kannenberg, Daniel G.

2006-01-03T23:59:59.000Z

452

Electric vehicle drive train with rollback detection and compensation  

DOE Patents [OSTI]

An electric vehicle drive train includes a controller for detecting and compensating for vehicle rollback, as when the vehicle is started upward on an incline. The vehicle includes an electric motor rotatable in opposite directions corresponding to opposite directions of vehicle movement. A gear selector permits the driver to select an intended or desired direction of vehicle movement. If a speed and rotational sensor associated with the motor indicates vehicle movement opposite to the intended direction of vehicle movement, the motor is driven to a torque output magnitude as a nonconstant function of the rollback speed to counteract the vehicle rollback. The torque function may be either a linear function of speed or a function of the speed squared.

Konrad, Charles E. (Roanoke, VA)

1994-01-01T23:59:59.000Z

453

Electric vehicle drive train with direct coupling transmission  

DOE Patents [OSTI]

An electric vehicle drive train includes an electric motor and an associated speed sensor, a transmission operable in a speed reduction mode or a direct coupled mode, and a controller responsive to the speed sensor for operating the transmission in the speed reduction mode when the motor is below a predetermined value, and for operating the motor in the direct coupled mode when the motor speed is above a predetermined value. The controller reduces the speed of the motor, such as by regeneratively braking the motor, when changing from the speed reduction mode to the direct coupled mode. The motor speed may be increased when changing from the direct coupled mode to the speed reduction mode. The transmission is preferably a single stage planetary gearbox. 6 figures.

Tankersley, J.B.; Boothe, R.W.; Konrad, C.E.

1995-04-04T23:59:59.000Z

454

Electric vehicle drive train with direct coupling transmission  

DOE Patents [OSTI]

An electric vehicle drive train includes an electric motor and an associated speed sensor, a transmission operable in a speed reduction mode or a direct coupled mode, and a controller responsive to the speed sensor for operating the transmission in the speed reduction mode when the motor is below a predetermined value, and for operating the motor in the direct coupled mode when the motor speed is above a predetermined value. The controller reduces the speed of the motor, such as by regeneratively braking the motor, when changing from the speed reduction mode to the direct coupled mode. The motor speed may be increased when changing from the direct coupled mode to the speed reduction mode. The transmission is preferably a single stage planetary gearbox.

Tankersley, Jerome B. (Fredericksburg, VA); Boothe, Richard W. (Roanoke, VA); Konrad, Charles E. (Roanoke, VA)

1995-01-01T23:59:59.000Z

455

Electric vehicle drive train with rollback detection and compensation  

DOE Patents [OSTI]

An electric vehicle drive train includes a controller for detecting and compensating for vehicle rollback, as when the vehicle is started upward on an incline. The vehicle includes an electric motor rotatable in opposite directions corresponding to opposite directions of vehicle movement. A gear selector permits the driver to select an intended or desired direction of vehicle movement. If a speed and rotational sensor associated with the motor indicates vehicle movement opposite to the intended direction of vehicle movement, the motor is driven to a torque output magnitude as a nonconstant function of the rollback speed to counteract the vehicle rollback. The torque function may be either a linear function of speed or a function of the speed squared. 6 figures.

Konrad, C.E.

1994-12-27T23:59:59.000Z

456

Technologies and policies for controlling greenhouse gas emissions from the U. S. automobile and light truck fleet.  

SciTech Connect (OSTI)

The message conveyed by the above discussion is that there are no shortages of technologies available to improve the fuel efficiency of the U.S. fleet of autos and light trucks. It clearly is technically feasible to improve greatly the fuel economy of the average new light-duty vehicle. Many of these technologies require tradeoffs, however, that manufacturers are unwilling or (as yet) unable to make in today's market and regulatory environment. These tradeoffs involve higher costs (that might be reduced substantially over time with learning and economies of scale), technical risk and added complexity, emissions concerns (especially for direct injection engines, and especially with respect to diesel engine technology), and customer acceptance issues. Even with current low U.S. oil prices, however, many of these technologies may find their way into the U.S. market, or increase their market share, as a consequence of their penetration of European and Japanese markets with their high gasoline prices. Automotive technology is ''fungible'' that is, it can be easily transported from one market to another. Nevertheless, it probably is unrealistic to expect substantial increases in the average fuel economy of the U.S. light-duty fleet without significant changes in the market. Without such changes, the technologies that do penetrate the U.S. market are more likely to be used to increase acceleration performance or vehicle structures or enable four wheel drive to be included in vehicles without a net mpg penalty. In other words, technology by itself is not likely to be enough to raise fleet fuel economy levels - this was the conclusion of the 1995 Ailomar Conference on Energy and Sustainable Transportation, organized by the Transportation Research Board's Committees on Energy and Alternative Fuels, and it is one I share.

Plotkin, S.

1999-01-01T23:59:59.000Z

457

Surfactant based imbibition and induced solution gas drive process: investigation by nuclear magnetic resonance  

E-Print Network [OSTI]

drive mechanism. This imbibition and induced solution gas drive study employed nuclear magnetic resonance (NMR) spectroscopy techniques to monitor and characterize the progress of oil recovery inside the rock sample core. A specially designed core...SURFACTANT BASED IMBIBITION AND INDUCED SOLUTION GAS DRIVE PROCESS: INVESTIGATION BY NUCLEAR MAGNETIC RESONANCE A Thesis by JAMES CALVIN COX Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

Cox, James Calvin

1993-01-01T23:59:59.000Z

458

Inflow Performance Relationships (IPR) for Solution Gas Drive Reservoirs -- a Semi-Analytical Approach  

E-Print Network [OSTI]

INFLOW PERFORMANCE RELATIONSHIPS (IPR) FOR SOLUTION GAS DRIVE RESERVOIRS ? A SEMI-ANALYTICAL APPROACH A Thesis by MAR?A ALEJANDRA NASS Submitted to the Office of Graduate Studies of Texas A&M University... Inflow Performance Relationships (IPR) For Solution Gas Drive Reservoirs ? a Semi-Analytical Approach Copyright 2010 Mar?a Alejandra Nass INFLOW PERFORMANCE RELATIONSHIPS (IPR) FOR SOLUTION GAS DRIVE RESERVOIRS ? A SEMI...

Nass, Maria A.

2010-07-14T23:59:59.000Z

459

High-Power Converters and AC Drives IEEE PESC2005 Tutorial  

E-Print Network [OSTI]

@ee.ryerson.ca http://www.ee.ryerson.ca/~bwu/ 2 High-Power Converters and AC Drives 1. Introduction 2. Cascaded H-Bridge Drives · High-Power Semiconductor Devices High-Power Converters and AC Drives Bin Wu 4High · Multilevel Voltage Source Inverters N dC Cascaded H-bridge (CHB) Inverter dC Two Level Inverter dC Flying

Wu, Bin

460

An investigation of irregular switching in three phase adjustable speed motor drives without neutral connection  

E-Print Network [OSTI]

Phase Adjustable Speed Motor Drives without Neutral Connection. (May 1990) Md. Shamsul Arefeen, B. S. , Bangladesh Univ. of Engg. 8z Technology Chair of Advisory Committee: Dr. M. Ehsani There are many industrial applications where variable speed... There are many industrial application where variable speed drives of electrical ma, - chines are needed. This requirement of high performance electric drives can be met either by a. dc or by an ac machine. Due to cost and ease of control, high performance...

Arefeen, Shamsal

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

The Alcubierre Warp Drive: On the Matter of Matter  

E-Print Network [OSTI]

The Alcubierre warp drive allows a spaceship to travel at an arbitrarily large global velocity by deforming the spacetime in a bubble around the spaceship. Little is known about the interactions between massive particles and the Alcubierre warp drive, or the effects of an accelerating or decelerating warp bubble. We examine geodesics representative of the paths of null and massive particles with a range of initial velocities from -c to c interacting with an Alcubierre warp bubble travelling at a range of globally subluminal and superluminal velocities on both constant and variable velocity paths. The key results for null particles match what would be expected of massive test particles as they approach +/- c. The increase in energy for massive and null particles is calculated in terms of v_s, the global ship velocity, and v_p, the initial velocity of the particle with respect to the rest frame of the origin/destination of the ship. Particles with positive v_p obtain extremely high energy and velocity and become "time locked" for the duration of their time in the bubble, experiencing very little proper time between entering and eventually leaving the bubble. When interacting with an accelerating bubble, any particles within the bubble at the time receive a velocity boost that increases or decreases the magnitude of their velocity if the particle is moving towards the front or rear of the bubble respectively. If the bubble is decelerating, the opposite effect is observed. Thus Eulerian matter is unaffected by bubble accelerations/decelerations. The magnitude of the velocity boosts scales with the magnitude of the bubble acceleration/deceleration.

Brendan McMonigal; Geraint F. Lewis; Philip O'Byrne

2012-02-26T23:59:59.000Z

462

EERE Energy Impacts: You Can Now Drive a Fuel Cell Electric Vehicle...  

Broader source: Energy.gov (indexed) [DOE]

| Photos by Sarah Gerrity, Energy Department Sunita Satyapal Sunita Satyapal Director, Fuel Cell Technologies Office What does this mean for me? You can now drive a fuel cell...

463

E-Print Network 3.0 - active reel drive Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and safety of transportation, and to alleviate the impact Summary: , adjustable-speed drives, electric utility and distributed- generation applications, motor controls... , and...

464

Impacts of Cooling Technology on Solder Fatigue for Power Modules in Electric Traction Drive Vehicles: Preprint  

SciTech Connect (OSTI)

Describes three power module cooling topologies for electric traction drive vehicles: two advanced options using jet impingement cooling and one option using pin-fin liquid cooling.

O'Keefe, M.; Vlahinos, A.

2009-08-01T23:59:59.000Z

465

Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar  

Broader source: Energy.gov [DOE]

Marketing and Driving Demand Collaborative: Social Media Tools and Strategies Webinar, from the U.S. Department of Energy's Better Buildings program.

466

E-Print Network 3.0 - automobile driving Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- pects of driving automation. Stand 7 CLUSTER 1 Wrzburger 23. und 24. November Automobil Gipfel 12;... : The innovation consists of perdicting driver intentionality from...

467

E-Print Network 3.0 - automated basic driving Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Conference on Augmented Cognition, Las Vegas, NV; July 22-27, 2005. Summary: an automobile driving decision making task with 5 levels of automation ranging from fully manual...

468

Fact #854 January 5, 2015 Driving Ranges for All-Electric Vehicles...  

Broader source: Energy.gov (indexed) [DOE]

Driving ranges for all-electric vehicles vary considerably. Based on the official Environmental Protection Agency (EPA) range values reported on window stickers, the Mitsubishi...

469

Optimal investment and scheduling of distributed energy resources with uncertainty in electric vehicles driving schedules  

E-Print Network [OSTI]

management of small electric energy systems including V2Gand renewable energy sources,” Electric Power Systemsof electric-drive vehicles with renewable energy,” Energy,

Cardoso, Goncalo

2014-01-01T23:59:59.000Z

470

Variable speed drive as an alternative solution for a micro-hydro power plant.  

E-Print Network [OSTI]

?? This diploma work is mainly focused on developing the control strategy for avariable speed drive as an alternative solution to a micro-hydro power plant.… (more)

Akhtar, Malik Usman

2012-01-01T23:59:59.000Z

471

Progressive Dynamical Drive Train Modeling as Part of NREL Gearbox Reliability Collaborative: Preprint  

SciTech Connect (OSTI)

The Gearbox Reliabiity Collaborative seeks to integrate several numerical models into the wind turbine drive train design process. This paper describes these models.

Oyague, F.

2008-07-01T23:59:59.000Z

472

E-Print Network 3.0 - arrays driving dynamic Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of about 10.9 GHz... of a superconducting microstrip resonator and series arrays of Josephson junctions integrated within its rf current... drive frequency. To reach a...

473

Bearing options, including design and testing, for direct drive linear generators in wave energy converters.  

E-Print Network [OSTI]

??The key focus of this research was to investigate the bearing options most suited to operation in a novel direct drive linear generator. This was… (more)

Caraher, Sarah

2011-01-01T23:59:59.000Z

474

E-Print Network 3.0 - alcohol-impaired driving behavior Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

14 WINTER 2009 In This Issue Summary: strategies to reduce alcohol-impaired motorcycle operation for NHTSA. "One of the initiatives that CTS... with drinking and driving....

475

Driving Simulator for Head-Up Display Evaluation: Driver's Response Time on Accident Simulation Cases  

E-Print Network [OSTI]

Charissis,V. Arafat,S. Chan,W. Christomanos,C. Driving Simulation Conference, DSC Asia/Pacific 2006, Tsukuba, Tokyo, Japan

Charissis, V.; Arafat, S.

476

Proc. IEEE Int'l. Conf. on Robotics and Automation, Orlando, FL, May 15-19, 2006  

E-Print Network [OSTI]

Stable Single-Wheeled Mobile Robot with Inverse Mouse-Ball Drive T. B. Lauwers, G. A. Kantor, and R. L size of a house doorway. Abstract-- Multi-wheel statically-stable mobile robots tall enough to interact a high center of gravity, that balances dynamically on a single spherical wheel. Unlike balancing 2-wheel

477

Subcontract Report: Final Report on Assessment of Motor Technologies for Traction Drives of Hybrid and Electric Vehicles (Subcontract #4000080341)  

SciTech Connect (OSTI)

Currently, interior permanent magnet (IPM) motors with rare-earth (RE) magnets are almost universally used for hybrid and electric vehicles (EVs) because of their superior properties, particularly power density. However, there is now a distinct possibility of limited supply or very high cost of RE magnets that could make IPM motors unavailable or too expensive. Because development of electric motors is a critical part of the U.S. Department of Energy (DOE) Advanced Power Electronics and Motors activity, DOE needs to determine which options should be investigated and what barriers should be addressed. Therefore, in order to provide a basis for deciding which research topics should be pursued, an assessment of various motor technologies was conducted to determine which, if any, is potentially capable of meeting FreedomCAR 2015 and 2020 targets. Highest priority was given to IPM, surface mounted permanent magnet (SPM), induction, and switched reluctance (SR) motors. Also of interest, but with lesser emphasis, were wheel motors, multiple-rotor motors, motors with external excitation, and several others that emerged from the assessment. Cost and power density (from a design perspective, the power density criterion translates to torque density) are emerging as the two most important properties of motors for traction drives in hybrid and EVs, although efficiency and specific power also are very important. The primary approach for this assessment involved interviews with original equipment manufacturers (OEMs), their suppliers, and other technical experts. For each technology, the following issues were discussed: (1) The current state-of-the-art performance and cost; (2) Recent trends in the technology; (3) Inherent characteristics of the motor - which ones limit the ability of the technology to meet the targets and which ones aid in meeting the target; (4) What research and development (R&D) would be needed to meet the targets; and (5) The potential for the technology to meet the targets. The interviews were supplemented with information from past Oak Ridge National Laboratory (ORNL) reports, previous assessments that were conducted in 2004, and literature on magnet technology. The results of the assessment validated the DOE strategy involving three parallel paths: (1) there is enough of a possibility that RE magnets will continue to be available, either from sources outside China or from increased production in China, that development of IPM motors using RE magnets should be continued with emphasis on meeting the cost target. (2) yet the possibility that RE magnets may become unavailable or too expensive justifies efforts to develop innovative designs for permanent magnet (PM) motors that do not use RE magnets. Possible other magnets that may be substituted for RE magnets include samarium-cobalt (Sm-Co), Alnico, and ferrites. Alternatively, efforts to develop motors that do not use PMs but offer attributes similar to IPM motors also are encouraged. (3) New magnet materials using new alloys or processing techniques that would be less expensive or have comparable or superior properties to existing materials should be developed if possible. IPM motors are by far the most popular choice for hybrid and EVs because of their high power density, specific power, and constant power-speed ratio (CPSR). Performance of these motors is optimized when the strongest possible magnets - i.e., RE neodymium-iron-boron (NdFeB) magnets - are used.

Fezzler, Raymond [BIZTEK Consulting, Inc.

2011-03-01T23:59:59.000Z

478

Communicating@theWheel.pub  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

is essential to making sure that you are seen. Preoccupied, or momentarily distracted drivers or pedestrians can be totally unaware of your presence. Gently tap on the horn to get...

479

Ferrite permanent magnet electrical machine and the application thereof within vehicle traction drives  

SciTech Connect (OSTI)

This patent describes, in combination, a land vehicle having axially aligned ground engaging tractive wheels, and a drivetrain carried by the vehicle for the propulsion thereof. The drivetrain comprises: (a) a substantially fixed DC power source including at least one chemical battery, (b) transmission means including selectable multiple gear ratios, an input shaft and a mechanical differential operative to transfer torque to the wheels, (c) a single-phase self-synchronous permanent magnet motor including, (i) an elongated central shaft, (ii) a generally u-shaped frame assembly adapted for mechanical grounding the shaft to a relatively stationary portion of the vehicle, the shaft being secured to the frame proximate each end thereof, (iii) a stator assembly secured to the shaft and characterized by a plurality of outwardly directed integrally formed salient poles and associated bifilar-wound induction coils, and (iv) a rotor assembly rotatably disposed on the shaft and substantially enclosing the stator assembly, the rotor assembly comprising a cylindrical shell defining an inner surface.

Gritter, D.J.; O'Neil, W.K.; Turner, D.

1987-03-17T23:59:59.000Z

480

Evaluation of 2004 Toyota Prius Hybrid Electric Drive System  

SciTech Connect (OSTI)

The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE) - Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

Staunton, Robert H [ORNL; Ayers, Curtis William [ORNL; Chiasson, J. N. [University of Tennessee, Knoxville (UTK); Burress, Timothy A [ORNL; Marlino, Laura D [ORNL

2006-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "wheel drive four-wheel" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Evaluation of 2004 Toyota Prius Hybrid Electric Drive System  

SciTech Connect (OSTI)

The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE)-Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

Staunton, R.H.; Ayers, C.W.; Chiasson, J.N. (U Tennessee-Knoxville); Burress, B.A. (ORISE); Marlino, L.D.

2006-05-01T23:59:59.000Z

482

Symmetrical and Asymmetrical H-Bridge Multilevel Inverter for DTC Induction Motor Drive  

E-Print Network [OSTI]

Symmetrical and Asymmetrical H-Bridge Multilevel Inverter for DTC Induction Motor Drive Automotive--Several works have been reported in the literature on multilevel inverters topologies, control techniques drives associated to three-phase multilevel inverter. This paper presents then a comparison study

Paris-Sud XI, Université de

483

Ratchet Effect and Nonlinear Transport for Particles on Random Substrates with Crossed ac Drives  

E-Print Network [OSTI]

We show in simulations that overdamped interacting particles in two dimensions with a randomly disordered substrate can exhibit novel nonequilibrium transport phenomena including a transverse ratchet effect, where a combined dc drive and circular ac drive produce a drift velocity in the direction transverse to the applied dc drive. The random disorder does not break any global symmetry; however, in two dimensions, symmetry breaking occurs due to the chirality of the circular drive. In addition to inducing the transverse ratchet effect, increasing the ac amplitude also strongly affects the longitudinal velocity response and can produce what we term an overshoot effect where the longitudinal dc velocity is higher in the presence of the ac drive than it would be for a dc drive alone. We also find a dynamical reordering transition upon increasing the ac amplitude. In the absence of a dc drive, it is possible to obtain a ratchet effect when the combined ac drives produce particle orbits that break a reflection symmetry. In this case, as the ac amplitude increases, current reversals can occur. These effects may be observable for vortices in type II superconductors as well as for colloids interacting with random substrates.

C. Reichhardt; C. J. Olson Reichhardt

2005-09-13T23:59:59.000Z

484

PHYSICAL REVIEW E 86, 036314 (2012) ac electric fields drive steady flows in flames  

E-Print Network [OSTI]

PHYSICAL REVIEW E 86, 036314 (2012) ac electric fields drive steady flows in flames Aaron M. Drews June 2012; published 20 September 2012) We show that time-oscillating electric fields applied-averaged force that drives the steady flows observed experimentally. A quantitative model describes the response

Heller, Eric

485

Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles  

E-Print Network [OSTI]

Space Vector PWM Control Synthesis for a H-Bridge Drive in Electric Vehicles A. Kolli1 , Student Magnet Synchronous Machine in Electric Vehicle application. First, a short survey of existing power control methods are compared with three innovative ones using EV-drive specifications in the normal

Paris-Sud XI, Université de

486

ELECTRIC DRIVE BY `25: How California Can Catalyze Mass Adoption of  

E-Print Network [OSTI]

ELECTRIC DRIVE BY `25: How California Can Catalyze Mass Adoption of Electric Vehicles by 2025@law.berkeley.edu. #12;1UCLA Law \\ Berkeley Law ELECTRIC DRIVE BY `25: How California Can Catalyze Mass Adoption of Electric Vehicles by 2025 Executive Summary: The Importance of Electrifying Vehicles California will need

Kammen, Daniel M.

487

A Method for Impact Assessment of Faults on the Performance of Field-Oriented Control Drives  

E-Print Network [OSTI]

, reliability of a motor drive can be explored via the emerging field of thermo- electrical analysis [3A Method for Impact Assessment of Faults on the Performance of Field-Oriented Control Drives Grainger Center for Electric Machinery and Electromechanics Department of Electrical and Computer

Liberzon, Daniel

488

Robust Generator System Using PM Assisted Synchronous Reluctance Generator with Current-fed Drive  

E-Print Network [OSTI]

action by making the PMa-SynRG operates as a generator, rectifying the phase voltages by means of the three-phase rectifier and feeding the power into the load. These features make the current-fed drive a good candidate for driving any type of synchronous...

Baek, Jeihoon

2011-02-22T23:59:59.000Z

489

Head tilt during driving DANIEL C. ZIKOVITZ and LAURENCE R. HARRIS *  

E-Print Network [OSTI]

Head tilt during driving DANIEL C. ZIKOVITZ ² and LAURENCE R. HARRIS² * Departments of ² Biology and Psychology, York University, Toronto, Ontario M3J 1P3, Canada Keywords: Driving behaviour; Head tilt; Vision with the visually-available estimate of the curvature of the road (r 2 = 0.86) but not with the centripetal force (r

Harris, Laurence R.

490

Electric vehicles: How much range is required for a day's driving? Nathaniel S. Pearre a,  

E-Print Network [OSTI]

Electric vehicles: How much range is required for a day's driving? Nathaniel S. Pearre a, , Willett online xxxx Keywords: Electric vehicle Plug-in vehicle Daily driving range Range requirement Trip timing require- ments of electric vehicles (EVs). We conservatively assume that EV drivers would not change

Firestone, Jeremy

491

BATTERY-POWERED, ELECTRIC-DRIVE VEHICLES PROVIDING BUFFER STORAGE FOR PV CAPACITY VALUE  

E-Print Network [OSTI]

BATTERY-POWERED, ELECTRIC-DRIVE VEHICLES PROVIDING BUFFER STORAGE FOR PV CAPACITY VALUE Steven requirements that will result in a number of new battery-powered electric drive vehicles being sold beginning as vehicle-to-grid (V2G) power. In a recent press release, the Electric Power Research Institute speculates

Perez, Richard R.

492

OMEGA ICF experiments and preparation for direct drive ignition on NIF  

E-Print Network [OSTI]

-DT' design: a spherical target of Current address: Lawrence Livermore National Laboratory, Livermore, CAOMEGA ICF experiments and preparation for direct drive ignition on NIF R.L. McCrorya , R.E. Bahra) is investigating various theoretical aspects of a direct drive National Ignition Facility (NIF) ignition target

493

UBC Social Ecological Economic Development Studies (SEEDS) Student Report Elevator Drive Systems Energy Consumption Study Report  

E-Print Network [OSTI]

Energy Consumption Study Report Benny ChunYin Chan University of British Columbia EECE 492 April 6th the current status of the subject matter of a project/report". #12;Elevator Drive Systems Energy Consumption Study Report April 2012 0 2012 Elevator Drive Systems Energy Consumption Study Report Benny CY Chan UBC

494

An Analysis of Hard Drive Energy Consumption Anthony Hylick, Ripduman Sohan, Andrew Rice, and Brian Jones  

E-Print Network [OSTI]

An Analysis of Hard Drive Energy Consumption Anthony Hylick, Ripduman Sohan, Andrew Rice, and Brian consumed by the electronics of a drive is just as important as the mechanical energy consumption; (ii consumption was a concern pri- marily for mobile computing domains. The rising cost of energy and increased

Cambridge, University of

495

Drive-by-Wireless Teleoperation with Network QoS Adaptation  

E-Print Network [OSTI]

tele- operation of drive-by-wireless applications, which utilize energy concepts and impose an adaptation scheme for drive- by-wireless teleoperation of an electric vehicle. The performance variation due to the varying time delay and packet losses is investigated and catered for by using an adaptive gain scheduling

Paris-Sud XI, Université de

496

FHP troopers barred from talking on hand-held cell phones while driving  

E-Print Network [OSTI]

FHP troopers barred from talking on hand-held cell phones while driving October 04, 2010|By Jerome a cell phone while talking and driving. Eight other states, including California and New York, have attention." Troopers may use their cell phones only with a hands-free device. "Members must be able

Belogay, Eugene A.

497

Plasma channel from EP beam Direct-drive ignition is the main thrust in LLE  

E-Print Network [OSTI]

-drive ignition; this is not an optimal configuration fordirectdrivethatrequiressphericalillumination I2093 for direct-drive experiments; it is coupled to a high-power, short-pulse laser (OMEGA EP) to explore advanced 26 kJ Scale 1:70 in energy Scale 1:1 Scale 1:1 #12;Hydro-equivalentignitiononOMEGA #12;Ignition

498

Best Practices for Energy Efficient Cleanrooms Efficient HVAC Systems: Variable-Speed-Drive Chillers  

E-Print Network [OSTI]

LBNL-58636 Best Practices for Energy Efficient Cleanrooms Efficient HVAC Systems: Variable Efficient Cleanrooms Efficient HVAC Water Systems: Variable-Speed-Drive Chillers Tengfang Xu Contents HVAC.................................................................................................................................... 6 #12;HVAC Water Systems Variable-Speed-Drive Chillers Summary Cleanroom energy benchmarking data

499

Cell-autonomous circadian clock of hepatocytes drives rhythms in transcription and polyamine synthesis  

E-Print Network [OSTI]

Cell-autonomous circadian clock of hepatocytes drives rhythms in transcription and polyamine of the cell-autonomous clock and central pacemaker to rhythmic liver physiology. Through microarray expression oscillations, demonstrating that the cell-autonomous clock can drive many rhythms, and that MMH-D3 is a valid

500

Advanced Time-Frequency Mutual Information Measures for Condition Based Maintenance of Helicopter Drive Trains  

E-Print Network [OSTI]

Drive Trains GRA: David Coats, Principal Investigators: Dr. Yong-June Shin, Abdel Bayoumi Motivation-1409. · Kwangik Cho, David Coats, John Abrams, Nicholas Goodman, Yong-June Shin, and Abdel E. Bayoumi point for examining eccentricities in gear- boxes, drive components, and motor vibration signatures

Almor, Amit