Powered by Deep Web Technologies
Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

PERFORMANCE STATISTICS WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

27 lbs 27 lbs Delivered Curb Weight: 3618 lbs Distribution F/R: 58/42 % GVWR: 4680 lbs GAWR F/R: 2440/2440 lbs Payload: 1062 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 103.2 inches Track F/R: 61.1/60.2 inches Length: 174.5 inches Width: 71.4 inches Height: 69.5 inches Ground Clearance: 7.8 inches Performance Goal: 5.0 inches TIRES Tire Mfg: Continental Tire Model: EcoPlus Tire Size: P235/70R16

2

PERFORMANCE STATISTICS WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

3474 lbs 3474 lbs Delivered Curb Weight: 3435 lbs GVWR: 4718 lbs GAWR F/R: 2491/2436 lbs Distribution F/R: % Payload: 1283 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 106.6 in Track F/R: 61.0/61.0 in Length: 181.3 in Width: 71.6 in Height: 65.3 in Ground Clearance: 7.0 in Performance Goal: 5.0 in TIRES Tire Mfg: General Tire Model: Ameri GS60 Tire Size: P215/70R16 Tire Pressure F/R: 35/35 psi

3

PERFORMANCE STATISTICS WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

90 lbs 90 lbs Delivered Curb Weight: 2936 lbs Distribution F/R: 59/41 % GVWR: 3795 lbs GAWR F/R: 2335/2250 lbs Payload: 905 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 106 inches Track F/R: 59/58 inches Length: 175 inches Width: 67 inches Height: 57.8 inches Ground Clearance: 4.3 inches Performance Goal: 5.0 inches TIRES Tire Mfg: Goodyear Tire Model: Integrity Tire Size: P185/65R15 Tire Pressure F/R: 35/33 psi

4

PERFORMANCE STATISTICS WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

40 lbs 40 lbs Delivered Curb Weight: 3556 lbs Distribution F/R: 58/42 % GVWR: 4665 lbs GAWR F/R: Unavailable Payload: 1109 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 109.3 in Track F/R: 62.0/61.6 in Length: 189.2 in Width: 71.7 in Height: 57.9 in Ground Clearance: 5.9 in Performance Goal: 5.0 in TIRES Tire Mfg: Michellin Tire Model: Energy MXV458 Tire Size: P215/60R16 Tire Pressure F/R: 32/32

5

PERFORMANCE STATISTICS WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

5650 lbs 5650 lbs Delivered Curb Weight: 5579 lbs Distribution F/R: 51.8/48.2 GVWR: 7100 lbs GAWR F/R: 3200/4100 lbs Payload: 1521 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 116.0 in Track F/R: 68.2/67.0 in Length: 202.0 in Width: 79.0 in Height: 74.6 in Ground Clearance: 9.5 in Performance Goal: 5.0 in TIRES Tire Mfg: Bridgestone Tire Model: Dueler H/R Tire Size: P265/65R18 Tire Pressure F/R: 32 psi

6

PERFORMANCE STATISTICS WEIghTS  

NLE Websites -- All DOE Office Websites (Extended Search)

365 lbs 365 lbs Delivered Curb Weight: 4510 lbs Distribution F/R: 57/43 % GVWR: 5520 lbs GAWR F/R: 2865/2865 lbs Payload: 1010 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 107.0 inches Track F/R: 62/61.2 inches Length: 187.2 inches Width: 72.6 inches Height: 66.4 inches Ground Clearance: 7.1 inches Performance Goal: 5.0 inches TIRES Tire Mfg: Goodyear Tire Model: Eagle RS-A Tire Size: P215/55R18 Tire Pressure F/R: 30/30 psi Spare Installed: Yes ENgINE Model: 3MZ-FE Output: 208 hp @ 5600 rpm Configuration: DOHC V6 Displacement: 3.3 L Fuel Tank Capacity: 17.2 Gallons Fuel Type: Unleaded Gasoline © 2010 Electric Transportation Applications All Rights Reserved VEhICLE FEATuRES Base Vehicle: 2006 Lexus RX 400h VIN: JTJHW31U160002575 Seatbelt Positions: Five

7

PERFORMANCE STATISTICS WEIghTS  

NLE Websites -- All DOE Office Websites (Extended Search)

2650 lbs 2650 lbs Delivered Curb Weight 9 : 2615 lbs Distribution F/R 9 (%): 58.6/41.4 GVWR: 3164 lbs GAWR F/R: 1797/1378lbs Payload 5 : 564 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 95.9 in Track F/R: 59.6/59.1 in Length: 160.6 in Width: 68.5 in Height: 54.9 in Ground Clearance: 5.3 in Performance Goal: 5.0 in TIRES Tire Mfg: Dunlop Tire Model: SP Sport 1000m Tire Size: 195 / 55 R16 86V Tire Pressure F/R: 30/30 psi Spare Installed: Yes ENgINE Model: 1.5 L I4 Output 8 : 122 hp @ 6000 rpm Configuration: Inline Four-cylinder Displacement: 1.5 L Fuel Tank Capacity: 10.6 gal Fuel Type: Unleaded Gasoline © 2010 Electric Transportation Applications All Rights Reserved VEhICLE FEATuRES Base Vehicle: 2011 Honda CRZ EX Hybrid VIN: JHMZF1C64BS002982

8

PERFORMANCE STATISTICS WEIghTS  

NLE Websites -- All DOE Office Websites (Extended Search)

245 lbs 245 lbs Delivered Curb Weight: 4118 lbs GVWR: 5675 lbs GAWR F/R: 2865/3130 lbs Distribution F/R: 59/41 % Payload: 1557 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 106.7 in Track F/R: 61.9/61.1 in Length: 185.3 in Width: 71.5 in Height: 68.6 in Ground Clearance: 5.9 in Performance Goal: 5.0 in TIRES Tire Mfg: Goodyear Tire Model: Integrity Tire Size: P225/65R17 Tire Pressure F/R: 32/32 Spare Installed: Yes ENgINE Model: 3MZ-FE Output: 208 hp @ 5600 rpm Configuration: V6 Displacement: 3.3 L Fuel Tank Capacity: 17.2 gal Fuel Type: Unleaded Gasoline © 2010 Electric Transportation Applications All Rights Reserved VEhICLE FEATuRES Base Vehicle: 2006 Highlander VIN: JTEDW21A860005681 Seatbelt Positions: Seven Standard Features: Air Conditioning

9

"EIA-914 Production Weighted Response Rates, Percent"  

U.S. Energy Information Administration (EIA) Indexed Site

EIA-914 Production Weighted Response Rates, Percent" EIA-914 Production Weighted Response Rates, Percent" "Areas",38353,38384,38412,38443,38473,38504,38534,38565,38596,38626,38657,38687,38718,38749,38777,"application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel","application/vnd.ms-excel"

10

Forecasting the Dose and Dose Rate from a Solar Particle Event Using Localized Weighted Regression  

Science Conference Proceedings (OSTI)

Dose/Dose Rate / Special Issue on the 11th International Conference on Radiation Shielding and the 15th Topical Meeting of the Radiation Protection and Shielding Division (Part 1) / Radiation Protection

T. F. Nichols; L. W. Townsend; J. W. Hines

11

The effect of slightly faster strain rates and internal hydrogen on uranium-0. 8 weight percent titanium alloy mechanical properties  

DOE Green Energy (OSTI)

Mechanical testing of uranium-0.8 wt % titanium (U-0.8 wt % Ti) alloys can affect the outcome of mechanical properties, primarily ductility, by varying the crosshead velocity, which changes the strain rate. However, most specifications that govern mechanical properties of this alloy reference ASTM E-8, which limits the speed to 0.5 in./in. of gage length per minute. Our current procedure for testing U-0.8 Ti is not at the maximum speed permitted in ASTM E-8, so an experiment was designed to evaluate the effect of maximizing the crosshead velocity per ASTM E-8. In order to create a fair assessment, tensile specimens were prepared that were low in internal hydrogen (0.02 ppM) and higher in internal hydrogen (0.36 ppM). External hydrogen effects were minimized by testing in a controlled environment that contained less than 10% relative humidity. Test results showed that for the low hydrogen test group, increasing the crosshead velocity caused a significant increase in reduction in area (RA), but not in elongation. For the higher hydrogen test group, increasing the speed resulted in a significant increase in RA and an increase, though not statistically significant, in elongation. Of equal importance was an observation that strongly suggests a correlation between material defects, like inclusion clusters, and higher hydrogen content, especially at the slower strain rate that would explain the erratic behavior in ductile properties associated with this alloy. As a result of this study, increasing the crosshead velocity to 0.32 in./min is recommended for mechanical testing of U-0.8 Ti alloys. 9 refs., 4 figs., 5 tabs.

Bird, E.L.

1990-10-10T23:59:59.000Z

12

RATES  

NLE Websites -- All DOE Office Websites (Extended Search)

Marketing > RATES Marketing > RATES RATES Current Rates Past Rates 2006 2007 2008 2009 2010 2011 2012 Rates Schedules Power CV-F13 CPP-2 Transmissions CV-T3 CV-NWT5 PACI-T3 COTP-T3 CV-TPT7 CV-UUP1 Ancillary CV-RFS4 CV-SPR4 CV-SUR4 CV-EID4 CV-GID1 Future and Other Rates SNR Variable Resource Scheduling Charge FY12-FY16 (October 1, 2012) SNR Rates Process Calendar (PDF - 171K) Procedures Informal Process Transmission Action Items List (PDF - 144K) Power Action Item List updated on 4-27-10 (PDF - 155K) Power Action Item List (Quick links to relevant documents) Formal Process Rates Brochure (01/11/2011) (PDF - 900K) Appendix A - Federal Register Notice (01/03/2011) (PDF - 8000K) Appendix B - Central Valley Project Power Repayment Study (PDF - 22,322K) Appendix C - Development of the CVP Cost of Service Study (PDF - 2038K)

13

RATES  

NLE Websites -- All DOE Office Websites (Extended Search)

Planning & Projects Planning & Projects Power Marketing Rates You are here: SN Home page > Power Marketing > RATES Rates and Repayment Services Rates Current Rates Power Revenue Requirement Worksheet (FY 2014) (Oct 2013 - Sep 2014) (PDF - 30K) PRR Notification Letter (Sep 27, 2013) (PDF - 959K) FY 2012 FP% True-Up Calculations(PDF - 387K) Variable Resource Scheduling Charge FY12-FY16 (October 1, 2012) PRR Forecast FY14-FY17 (May 23, 2013) (PDF - 100K) Forecasted Transmission Rates (May 2013) (PDF - 164K) Past Rates 2013 2012 2011 2010 2009 Historical CVP Transmission Rates (April 2013) (PDF - 287K) Rate Schedules Power - CV-F13 - CPP-2 Transmission - CV-T3 - CV-NWT5 - PACI-T3 - COTP-T3 - CV-TPT7 - CV-UUP1 Ancillary - CV-RFS4 - CV-SPR4 - CV-SUR4 - CV-EID4 - CV-GID1 Federal Register Notices - CVP, COTP and PACI

14

RATES  

NLE Websites -- All DOE Office Websites (Extended Search)

RATES RATES Rates Document Library SNR Rates Process Calendar (PDF - 171K) Procedures Informal Process Transmission Action Items List (PDF - 144K) Power Action Item List updated on 4-27-10 (PDF - 155K) Power Action Item List (Quick links to relevant documents) Formal Process Rates Brochure (01/11/2011) (PDF - 900K) Appendix A - Federal Register Notice (01/03/2011) (PDF - 8000K) Appendix B - Central Valley Project Power Repayment Study (PDF - 22,322K) Appendix C - Development of the CVP Cost of Service Study (PDF - 2038K) Appendix D - Western Transmission System Facilities Map (PDF - 274K) Appendix E - Estimated FY12 FP and BR Customer (PDF - 1144K) Appendix F - Forecasted Replacements and Additions FY11 - FY16 (PDF - 491K) Appendix G - Definitions (PDF - 1758K) Appendix H - Acronyms (PDF - 720K)

15

TIRES Tire Mfg: Triangle Tire Model: Radial...  

NLE Websites -- All DOE Office Websites (Extended Search)

505 lb Delivered Curb Weight: 2498 lb Distribution FR: 5149 % GVWR: 2998 lb GAWR FR: 17001550 lb Payload 2 : 500 lb Performance Goal: 400 lb DIMENSIONS Wheelbase: 97.0 inches...

16

TIRES Tire Mfg: Triangle Tire Model: Radial...  

NLE Websites -- All DOE Office Websites (Extended Search)

472 lb Delivered Curb Weight: 2472 lb Distribution FR: 5149 % GVWR: 2998 lb GAWR FR: 17971562 lb Payload 2 : 526 lb Performance Goal: 400 lb DIMENSIONS Wheelbase: 98.0 inches...

17

26 ford 4-p car data sheet.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

92 lb Delivered Curb Weight: 1431 lb Distribution FR: 4654% GVWR: 2300 lb GAWR FR: 8401530 lb Payload: 899 lb 3 Performance Goal: 400 lb DIMENSIONS Wheelbase: 77.9 inches Track...

18

29 nash car data sheet.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

54 lb Delivered Curb Weight: 1961 lb Distribution FR: 5050 % GVWR: 2593 lb GAWR FR: 11041489 lb Payload: 640 lb 2 Performance Goal: 400 lb DIMENSIONS Wheelbase: 86.6 Track FR:...

19

25 ford 2-p car sheet data.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

48 lb Delivered Curb Weight: 1355 lb Distribution FR: 4456% GVWR: 1900 lb GAWR FR: 7501230 lb Payload: 551 lb 3 Performance Goal: 400 lb DIMENSIONS Wheelbase: 67.9 inches Track...

20

Weighted Guidelines  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

───────────────────────────────────Chapter 15.4-2 (July 2010) 1 Weighted Guidelines [References: FAR 15.4, DEAR 915.4] Overview This section provides guidance for applying the Department of Energy's (DOE) structured approach in determining profit/fee. Background The Federal Acquisition Regulation (FAR) requires consideration of certain factors (described in 15.404-4 as "profit-analysis factors" or "common factors") in developing a structured profit/fee approach. It does not prescribe specific government-wide procedures for profit/fee analysis. Actual profit/fee may vary (FAR 15.404-4(a) (1)) as you perform your profit/fee analysis;

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Weighted Guidelines | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Weighted Guidelines Weighted Guidelines Weighted Guidelines More Documents & Publications Weighted Guidelines DOE F 4220.23 OPAM Policy Acquisition Guides...

22

Weighted Guidelines | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Weighted Guidelines Weighted Guidelines Weighted Guidelines More Documents & Publications Weighted Guidelines OPAM Policy Acquisition Guides DOE F 4220.23...

23

Weights and Measures Division Connections  

Science Conference Proceedings (OSTI)

Office of Weights and Measures Connections. Welcome to the Office of Weights and Measures newsletter Weights and ...

2013-09-11T23:59:59.000Z

24

Understanding Corn Test Weight  

E-Print Network (OSTI)

Corn test weight (TW) is an often discussed topic of conversation among corn growers. The topic moves to the forefront in years when corn has been stressed at some point during the grain filling period or when the growing season is ended by frost before physiological maturity is reached. In many cases, the concept of test weight is misunderstood. Test weight is volumetric measurement. An official bushel measures 1.244 cubic feet. To measure TW, we usually take the weight of some smaller unit of measure and make a conversion. The official minimum allowable TW for U.S. No. 1 yellow corn is 56 lbs. per bushel, while No. 2 corn is 54 lbs. per bushel. It's unknown how this all started hundreds of years ago, but perhaps it was easier and more fair to sell things based on volume (length x width x height), something a person could see, instead of weight. Today, of course, corn is sold by weight and often in 56-pound blocks that we, for some reason, still call a bushel. Because weight is contingent on moisture content, grain buyers base their price on a "standard " moisture of (usually) 15 or 15.5 percent. Test weight and yield... Sometimes high TW is associated with high grain yield and low TW is associated with low grain yield. In fact, there is a poor relationship between TW and yield. The same TW can exist across a

Mike Rankin

2009-01-01T23:59:59.000Z

25

Weighted Association Rule Mining using weighted support and significance framework  

Science Conference Proceedings (OSTI)

We address the issues of discovering significant binary relationships in transaction datasets in a weighted setting. Traditional model of association rule mining is adapted to handle weighted association rule mining problems where each item is allowed ... Keywords: WARM algorithm, Weighted Association Rule Mining, significant relationship, weighted downward closure property, weighted support

Feng Tao; Fionn Murtagh; Mohsen Farid

2003-08-01T23:59:59.000Z

26

Light weight phosphate cements  

DOE Patents (OSTI)

A sealant having a specific gravity in the range of from about 0.7 to about 1.6 for heavy oil and/or coal bed methane fields is disclosed. The sealant has a binder including an oxide or hydroxide of Al or of Fe and a phosphoric acid solution. The binder may have MgO or an oxide of Fe and/or an acid phosphate. The binder is present from about 20 to about 50% by weight of the sealant with a lightweight additive present in the range of from about 1 to about 10% by weight of said sealant, a filler, and water sufficient to provide chemically bound water present in the range of from about 9 to about 36% by weight of the sealant when set. A porous ceramic is also disclosed.

Wagh, Arun S. (Naperville, IL); Natarajan, Ramkumar, (Woodridge, IL); Kahn, David (Miami, FL)

2010-03-09T23:59:59.000Z

27

Low Impact Weight Loss Exercises | Fish Oil Weight Loss  

U.S. Energy Information Administration (EIA)

Low Impact Weight Loss Exercises. You want to lose weight, but for whatever reason, you want to or only can perform low impact exercises. No problem.

28

Rate Schedules  

Energy.gov (U.S. Department of Energy (DOE))

One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate...

29

Maximal Reliability for Unit-weighted Composites  

E-Print Network (OSTI)

Maximal Reliability for Unit-weighted Composites Peter M.Maximal Reliability for Unit-weighted Composites Althoughconsistency coefficient for a unit-weighted composite. The

Peter M. Bentler

2011-01-01T23:59:59.000Z

30

Rates - WAPA-137 Rate Order  

NLE Websites -- All DOE Office Websites (Extended Search)

WAPA-137 Rate Order WAPA-137 Rate Order 2009 CRSP Management Center Customer Rates Second Step Presentation from the June 25, 2009, Customer Meeting Handout Materials from the June 25, 2009, Customer Meeting Customer Comment Letters ATEA CREDA Farmington ITCA AMPUA Rate Adjustment Information The second step of WAPA-137 SLCA/IP Firm Power, CRSP Transmission and Ancillary Services rate adjustment. FERC Approval of Rate Order No. WAPA-137 Notice Of Filing for Rate Order No. WAPA-137 Published Final FRN for Rate Order No. WAPA-137 Letter to Customers regarding the published Notice of Extension of Public Process for Rate Order No. WAPA-137 Published Extension of Public Process for Rate Order No. WAPA-137 FRN Follow-up Public Information and Comment Forum Flier WAPA-137 Customer Meetings and Rate Adjustment Schedule

31

Energy Rating  

E-Print Network (OSTI)

Consistent, accurate, and uniform ratings based on a single statewide rating scale Reasonable estimates of potential utility bill savings and reliable recommendations on cost-effective measures to improve energy efficiency Training and certification procedures for home raters and quality assurance procedures to promote accurate ratings and to protect consumers Labeling procedures that will meet the needs of home buyers, homeowners, renters, the real estate industry, and mortgage lenders with an interest in home energy ratings

Cabec Conference; Rashid Mir P. E

2009-01-01T23:59:59.000Z

32

Insertion Rates  

Science Conference Proceedings (OSTI)

HOME > Insertion Rates. TECH HEADLINES. Research Explores a New Layer in Additive Manufacturin... Grand Opening Slated for Electron Microscopy Facility.

33

Apparatus for molecular weight separation  

DOE Patents (OSTI)

The present invention relates generally to an apparatus and method for separating high molecular weight molecules from low molecular weight molecules. More specifically, the invention relates to the use of microdialysis for removal of the salt (low molecular weight molecules) from a nucleotide sample (high molecular weight molecules) for ESI-MS analysis. The dialysis or separation performance of the present invention is improved by (1) increasing dialysis temperature thereby increasing desalting efficiency and improving spectrum quality; (2) adding piperidine and imidazole to the dialysis buffer solution and reducing charge states and further increasing detection sensitivity for DNA; (3) using low concentrations (0-2.5 mM NH4OAc) of dialysis buffer and shifting the DNA negative ions to higher charge states, producing a nearly 10-fold increase in detection sensitivity and a slightly decreased desalting efficiency, (4) conducting a two-stage separation or (5) any combination of (1), (2), (3) and (4).

Smith, Richard D. (Richland, WA); Liu, Chuanliang (Haverhill, MA)

2001-01-01T23:59:59.000Z

34

A general weighted grammar library  

Science Conference Proceedings (OSTI)

We present a general weighted grammar software library, the GRM Library, that can be used in a variety of applications in text, speech, and biosequence processing. The underlying algorithms were designed to support a wide variety of semirings ...

Cyril Allauzen; Mehryar Mohri; Brian Roark

2004-07-01T23:59:59.000Z

35

Rate schedule  

NLE Websites -- All DOE Office Websites (Extended Search)

Firm Power Service Provided by Rate/Charges Firm Power Service Provided by Rate/Charges Rate/Charges Effective Through (or until superceded) Firm Sales (SLIP-F9) Composite Rate SLIP 29.62 mills/kWh 9/30/2015 Demand Charge SLIP $5.18/kW-month 9/30/2015 Energy Charge SLIP 12.19 mills/kWh 9/30/2015 Cost Recovery Charge (CRC) SLIP 0 mills/kWh 9/30/2015 Transmission Service Provided by Current Rates effective10/12 - 9/15 (or until superceded) Rate Schedule Effective Through Firm Point-to-Point Transmission (SP-PTP7) CRSP $1.14 per kW-month $13.69/kW-year $0.00156/kW-hour $0.04/kW-day $0.26/kW-week 10/1/2008-9/30/2015 Network Integration Transmission (SP-NW3) CRSP see rate schedule 10/1/2008-9/30/2015 Non-Firm Point-to-Point Transmission (SP-NFT6) CRSP see rate schedule 10/1/2008-9/30/2015 Ancillary Services Provided by Rate Rate Schedule

36

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

208 VAC 3-Phase 2008 Electric Transportation Applications All Rights Reserved Base Vehicle: 2008 Roush Industries Roush REV VIN: 9BFBT32N767991505 Seatbelt Positions: Two...

37

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Dual Airbags FUEL TANKS Manufacturer: Dynetek Model: W150H350G8 DOT Type 3 2 Description: Carbon Fiber Wrap Aluminum Lined Number of Tanks: 3 Tank Liquid Volume: 150 liters Total...

38

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Airbags FUEL TANKS Manufacturer: Dynetek Model: W205H350G89 DOT Type 3 2 Description: Carbon Fiber Wrap Polymer Bladder Number of Tanks: 3 Tank Liquid Volume: 205 liters Total...

39

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Dual Airbags FUEL TANKS Manufacturer: Dynetek Model: W150H200G8 DOT Type 3 2 Description: Carbon Fiber Wrap over Polymer Bladder Number of Tanks: 3 Tank Liquid Volume: 150 liters...

40

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

Max Battery Leakage : <0.01 MIU Max DC Charge Current: 17.9 A Max AC Charge Current: 12.6 A Peak AC Demand: 1.51 kW Time to Recharge: To 80%: 6.7 Hours To 100%: 9.4 Hours To...

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

WEIGHTS  

NLE Websites -- All DOE Office Websites (Extended Search)

be intruded upon by the batteries or other conversion materials. (16) The controllerinverter shall limit the maximum battery discharge to prevent degradation of battery life (see...

42

Weights  

NLE Websites -- All DOE Office Websites (Extended Search)

be intruded upon by the batteries or other conversion materials. (16) The controllerinverter shall limit the maximum battery discharge to prevent degradation of battery life (see...

43

Overlapping repetitions in weighted sequence  

Science Conference Proceedings (OSTI)

Finding repeating patterns is a useful operation that have application in fields such as computing, music and molecular biology. In the latter, a requirement to detect repeating patterns in nucleic or protein sequences are very common in many applications ... Keywords: DNA assembly, covering of strings, molecular weighted sequences, partitioning, periodicity of strings, string algorithms

Ali Alatabbi; Maxime Crochemore; Costas S. Iliopoulos; Tewogboye A. Okanlawon

2012-09-01T23:59:59.000Z

44

Rates and Repayment Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Tariff Rates FY 2014 Rates and Rate Schedules FY 2013 Rates and Rate Schedules FY 2012 Rates and Rate Schedules FY 2011 Rates and Rate Schedules FY 2010 Rates and Rate Schedules FY...

45

A General Weighted Grammar Library  

E-Print Network (OSTI)

We present a general weighted grammar software library, the GRM Library, that can be used in a variety of applications in text, speech, and biosequence processing. The underlying algorithms were designed to support a wide variety of semirings and the representation and use of very large grammars and automata of several hundred million rules or transitions. We describe several algorithms and utilities of this library and point out in each case their application to several text and speech processing tasks.

Cyril Allauzen; Mehryar Mohri; Brian Roark

2004-01-01T23:59:59.000Z

46

Molecular Weight & Energy Transport 7 September 2011  

E-Print Network (OSTI)

Molecular Weight & Energy Transport 7 September 2011 Goals · Review mean molecular weight · Practice working with diffusion Mean Molecular Weight 1. We will frequently use µ, µe, and µI (the mean molecular weight per particle, per free electron, and per ion, respectively). Let's practice computing

Militzer, Burkhard

47

Weighted median filters with sigma-delta modulation encoding  

Science Conference Proceedings (OSTI)

Digital decimation filters play a fundamental role in oversampled sigma-delta A/D decoders. In this paper, we first show that weighted median (WM) filtering of a demodulated sequence (at the Nyquist rate) can be implemented concurrently in the A/D decoder. ...

G.R. Arce; N.A. Grabowski; N.C. Gallagher

2000-02-01T23:59:59.000Z

48

Rates and Repayment Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Customer Letter - Preliminary Review of Drought Adder Component for 2011 Firm Power Rates 2010 Rates and Rate Schedule - Current * 2009 Rates and Rate Schedule 2008 Rates and...

49

Energy Aware Scheduling for Weighted Completion Time and Weighted Tardiness  

E-Print Network (OSTI)

The ever increasing adoption of mobile devices with limited energy storage capacity, on the one hand, and more awareness of the environmental impact of massive data centres and server pools, on the other hand, have both led to an increased interest in energy management algorithms. The main contribution of this paper is to present several new constant factor approximation algorithms for energy aware scheduling problems where the objective is to minimize weighted completion time plus the cost of the energy consumed, in the one machine non-preemptive setting, while allowing release dates and deadlines.Unlike previous known algorithms these new algorithms can handle general job-dependent energy cost functions, extending the application of these algorithms to settings outside the typical CPU-energy one. These new settings include problems where in addition, or instead, of energy costs we also have maintenance costs, wear and tear, replacement costs, etc., which in general depend on the speed at which the machine r...

Carrasco, Rodrigo A; Stein, Cliff

2011-01-01T23:59:59.000Z

50

Weights and Measures State Directors IL  

Science Conference Proceedings (OSTI)

State Directors IL. Idaho. Mailing Address, Contact Information. ISDA Bureau of Weights & Measures PO Box 790 Boise, ID 83701. ...

2013-05-07T23:59:59.000Z

51

Weights and Measures Newsletter Archives - Hydrogen  

Science Conference Proceedings (OSTI)

Weights and Measures Newsletter Archives - Hydrogen. Series/B-XXX, Key Words, Article, Issue. B-016, Hydrogen H 2 National ...

2011-09-26T23:59:59.000Z

52

Weights and Measures State Directors N  

Science Conference Proceedings (OSTI)

... Information. NE Division of Weights & Measures 301 Centennial Mall South Box #94757 Lincoln, NE 68509-4757. ... North Dakota. Mailing ...

2013-05-09T23:59:59.000Z

53

Combining forecast weights: Why and how?  

Science Conference Proceedings (OSTI)

This paper proposes a procedure called forecast weight averaging which is a specific combination of forecast weights obtained from different methods of constructing forecast weights for the purpose of improving the accuracy of pseudo out of sample forecasting. It is found that under certain specified conditions

Yip Chee Yin; Ng Kok-Haur; Lim Hock-Eam

2012-01-01T23:59:59.000Z

54

Rates and Repayment Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates Loveland Area Project Firm Power Rates Transmission and Ancillary Services Rates 2012 Rate Adjustment-Transmission and Ancillary Services 2010 Rate Adjustment-Firm Power 2009...

55

Rates and Repayment Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates and Repayment Services Consolidated Rate Schedules FY 2014 Rates BCP Annual Rate Process Central Arizona Project Transmission Rate Process DSW Multiple System Transmission...

56

Minimum weight perfect matching in O(1) parallel time  

E-Print Network (OSTI)

Consider a 2-D square array of qubits of infinite extent. We provide a formal proof that the infinite size minimum weight perfect matching problem associated with running a particular class of topological quantum error correction codes on this array can be exactly solved with a corresponding infinite 2-D square array of classical computing devices in constant average time per round of error detection provided physical error rates are below fixed nonzero values, and other physically reasonable assumptions.

Austin G. Fowler

2013-07-06T23:59:59.000Z

57

Rates & Repayment  

NLE Websites -- All DOE Office Websites (Extended Search)

Environmental Review-NEPA Financial Data Operations Planning & Projects Power Marketing Rates Rate Adjustments Transmission Ancillary Services Rates WAPA-137 Rate Order Environmental Review-NEPA Financial Data Operations Planning & Projects Power Marketing Rates Rate Adjustments Transmission Ancillary Services Rates WAPA-137 Rate Order Rates and Repayment Services Rates Current and Historical Rate Information Collbran Power Rates CRSP Power Rates CRSP Transmission System Rates CRSP Management Center interest rates Falcon-Amistad Power Rates Provo River Power Rates Rio Grande Power Rates Seedskadee Power Rates SLCA/IP Power Rates Rate Schedules & Supplemental Rate Information Current Rates for Firm Power, Firm & Non-firm Transmission Service, & Ancillary Services Current Transmission & Ancillary Services Rates Tariffs Components of the SLCA/IP Existing Firm Power Rate Cost Recovery Charge (CRC) Page MOA Concerning the Upper Colorado River Basin

58

Production of high molecular weight polylactic acid  

DOE Patents (OSTI)

A degradable high molecular weight poly(lactic acid) is described. The poly(lactic acid) has a terminal end group of one of carboxyl or hydroxyl groups with low molecular weight poly(lactic acid) units coupled with linking agents of di-isocyanates, bis-epoxides, bis-oxazolines and bis-ortho esters. The resulting high molecular weight poly(lactic acid) can be used for applications taking advantage of the improved physical properties.

Bonsignore, P.V.

1995-11-28T23:59:59.000Z

59

Production of high molecular weight polylactic acid  

DOE Patents (OSTI)

A degradable high molecular weight poly(lactic acid). A poly(lactic acid) has a terminal end group of one of carboxyl or hydroxyl groups with low molecular weight poly(lactic acid) units coupled with linking agents of di-isocyanates, bis-epoxides, bis-oxazolines and bis-ortho esters. The resulting high molecular weight poly(lactic acid) can be used for applications taking advantage of the improved physical properties.

Bonsignore, Patrick V. (Joilet, IL)

1995-01-01T23:59:59.000Z

60

A Weighted Point Model for the Thermal Neutron Multiplicity Assay of High-Mass Plutonium Samples  

Science Conference Proceedings (OSTI)

A weighted point model for thermal neutron multiplicity counting has been developed for the assay of impure plutonium metal samples. Weighting factors are introduced for the spontaneous fission and ({alpha},n) contributions to the doubles and triples rates to account for the variations in neutron multiplication in these samples. The weighting factors are obtained from Monte Carlo simulations using the MCNPX code, which supports the simulation of spontaneous fission sources and can tally the source and detected neutron multiplicity distributions. Systematic behavior of the weighting factors was studied as a function of sample mass and geometry. Simulations were performed to evaluate the potential accuracy of assays performed with weighted point model analysis. Comparisons with experimental data are presented. The possible use of quads rates is explored.

M.S. Krick; W.H. Geist; D.R. Mayo

2005-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

The complexity of weighted and unweighted #CSP  

E-Print Network (OSTI)

We give some reductions among problems in (nonnegative) weighted #CSP which restrict the class of functions that needs to be considered in computational complexity studies. Our reductions can be applied to both exact and approximate computation. In particular, we show that a recent dichotomy for unweighted #CSP can be extended to rational-weighted #CSP.

Bulatov, Andrei; Goldberg, Leslie Ann; Jalsenius, Markus; Jerrum, Mark; Richerby, David

2010-01-01T23:59:59.000Z

62

Semiparametrically weighted robust estimation of regression models  

Science Conference Proceedings (OSTI)

A class of two-step robust regression estimators that achieve a high relative efficiency for data from light-tailed, heavy-tailed, and contaminated distributions irrespective of the sample size is proposed and studied. In particular, the least weighted ... Keywords: Adaptive estimation, Asymptotic efficiency, Breakdown point, Least weighted squares

Pavel ek

2011-01-01T23:59:59.000Z

63

LightWeight KerneL  

NLE Websites -- All DOE Office Websites (Extended Search)

Catamount n-Way LightWeight KerneL 1 R&D 100 Entry Catamount n-Way LightWeight KerneL 2 R&D 100 Entry Submitting organization Sandia National Laboratories PO Box 5800 Albuquerque,...

64

The weight filtration for real algebraic varieties  

E-Print Network (OSTI)

Using the work of Guillen and Navarro Aznar we associate to each real algebraic variety a filtered chain complex, the weight complex, which is well-defined up to filtered quasi-isomorphism, and which induces on Borel-Moore homology with Z/2 coefficients an analog of the weight filtration for complex algebraic varieties.

McCrory, Clint

2008-01-01T23:59:59.000Z

65

Maintaining ideal body weight counseling sessions  

SciTech Connect

The purpose of this program is to provide employees with the motivation, knowledge and skills necessary to maintain ideal body weight throughout life. The target audience for this program, which is conducted in an industrial setting, is the employee 40 years of age or younger who is at or near his/her ideal body weight.

Brammer, S.H.

1980-10-09T23:59:59.000Z

66

Query weighting for ranking model adaptation  

Science Conference Proceedings (OSTI)

We propose to directly measure the importance of queries in the source domain to the target domain where no rank labels of documents are available, which is referred to as query weighting. Query weighting is a key step in ranking model adaptation. As ...

Peng Cai; Wei Gao; Aoying Zhou; Kam-Fai Wong

2011-06-01T23:59:59.000Z

67

Weight Watchers on prescription: An observational study of weight change among adults referred to Weight Watchers by the NHS  

E-Print Network (OSTI)

% 50 % > 10% Loss 5-9.9% Loss 0.1-4.9% Loss Weight Change Pe rce nta ge of P art ici pa nts All referrals Completers Figure 3 Percentage of initial weight lost for all first recorded referrals commenced and those completing a first referral course (as... for weight loss. Annals of internal medicine 2007, 147(1):41-50. 12. Cooper Z, Doll HA, Hawker DM, Byrne S, Bonner G, Eeley E, OConnor ME, Fairburn CG: Testing a new cognitive behavioural treatment for obesity: A randomized controlled trial with three...

Ahern, Amy L; Olson, Ashley D; Aston, Louise M; Jebb, Susan A

2011-06-06T23:59:59.000Z

68

AN ASSESSMENT OF MCNP WEIGHT WINDOWS  

SciTech Connect

The weight window variance reduction method in the general-purpose Monte Carlo N-Particle radiation transport code MCNPTM has recently been rewritten. In particular, it is now possible to generate weight window importance functions on a superimposed mesh, eliminating the need to subdivide geometries for variance reduction purposes. Our assessment addresses the following questions: (1) Does the new MCNP4C treatment utilize weight windows as well as the former MCNP4B treatment? (2) Does the new MCNP4C weight window generator generate importance functions as well as MCNP4B? (3) How do superimposed mesh weight windows compare to cell-based weight windows? (4) What are the shortcomings of the new MCNP4C weight window generator? Our assessment was carried out with five neutron and photon shielding problems chosen for their demanding variance reduction requirements. The problems were an oil well logging problem, the Oak Ridge fusion shielding benchmark problem, a photon skyshine problem, an air-over-ground problem, and a sample problem for variance reduction.

J. S. HENDRICKS; C. N. CULBERTSON

2000-01-01T23:59:59.000Z

69

Microdialysis unit for molecular weight separation  

DOE Patents (OSTI)

The present invention relates generally to an apparatus and method for separating high molecular weight molecules from low molecular weight molecules. More specifically, the invention relates to the use of microdialysis for removal of the salt (low molecular weight molecules) from a nucleotide sample (high molecular weight molecules) for ESI-MS analysis. The dialysis or separation performance of the present invention is improved by (1) increasing dialysis temperature thereby increasing desalting efficiency and improving spectrum quality; (2) adding piperidine and imidazole to the dialysis buffer solution and reducing charge states and further increasing detection sensitivity for DNA; (3) using low concentrations (0-2.5 mM NH4OAc) of dialysis buffer and shifting the DNA negative ions to higher charge states, producing a nearly 10-fold increase in detection sensitivity and a slightly decreased desalting efficiency, or (4) any combination of (1), (2), and (3).

Smith, Richard D. (Richland, WA); Liu, Chuanliang (Richland, WA)

1999-01-01T23:59:59.000Z

70

Dileptons, spectral weights, and conductivity in the Quark-Gluon Plasma  

E-Print Network (OSTI)

We re-examine soft dilepton emission from a weakly coupled Quark-Gluon Plasma. We show that Braaten, Pisarski, and Yuan's result that the dilepton rate rises as E^-4 (and the spectral weight scales as 1/E) at small energy Econductivity. We evaluate the spectral weight in the E~g^4 T region by kinetic theory techniques and show that it satisfies a sum rule, which makes the determination of electrical conductivity from the Euclidean correlation function very challenging.

Guy D. Moore; Jean-Marie Robert

2006-07-14T23:59:59.000Z

71

WEIGHTED GUIDELINES PROFIT/FEE OBJECTIVE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WEIGHTED GUIDELINES PROFIT/FEE OBJECTIVE WEIGHTED GUIDELINES PROFIT/FEE OBJECTIVE DOE F 4220.23 (06-95) U.S. DEPARTMENT OF ENERGY 1. CONTRACTOR IDENTIFICATION 2. TYPE OF ACQUISTION ACTION (REFER TO OFPP MANUAL, FEDERAL PROCUREMENT DATA SYSTEMS - PRODUCT AND SERVICE CODES. APRIL 1980) a. Name c. Street address b. Division (If any) d. City e. State f. Zip code a. SUPPLIES & EQUIPMENT b. RESEARCH & DEVELOPMENT c. SERVICES: (1) ARCHITECT-ENGINEER: (2) MANAGEMENT SERVICES: (3) MEDICAL: (4) OTHER (e.g., SUPPORT SERVICES) 3. ACQUISITION INFORMATION a. Purchasing Offices b. Contract type d. FY c. RFP/RFQ No. e. Contract No. PROFIT/FEE OBJECTIVE COMPUTATION PROFIT/FEE CONSIDERATIONS a. MEASUREMENT BASE b. PROFIT/FEE WEIGHT RANGES (%) c. ASSIGNED

72

A Light-Weight Instrumentation System Design  

Science Conference Proceedings (OSTI)

To meet challenging constraints on telemetry system weight and volume, a custom Light-Weight Instrumentation System was developed to collect vehicle environment and dynamics on a short-duration exo-atmospheric flight test vehicle. The total telemetry system, including electronics, sensors, batteries, and a 1 watt transmitter weighs about 1 kg. Over 80 channels of measurement, housekeeping, and telemetry system diagnostic data are transmitted at 128 kbps. The microcontroller-based design uses the automotive industry standard Controller Area Network to interface with and support in-flight control fimctions. Operational parameters are downloaded via a standard asynchronous serial communications intefiace. The basic design philosophy and functionality is described here.

Kidner, Ronald

1999-06-02T23:59:59.000Z

73

Data Center Rating Infrastructure Rating Development  

NLE Websites -- All DOE Office Websites (Extended Search)

in Portfolio Manager on June 7, 2010. The questions below are designed to help data center owners and operators better understand the rating and benchmark their buildings in...

74

Tracking the Libor Rate  

E-Print Network (OSTI)

Investigating the Libor Rate, mimeo. Abrantes-Metz, R. ,Libor data: Historial 1 month Libor rates, British Bankers1108R) Tracking the Libor Rate Rosa M. Abrantes-Metz , Sofia

Abrantes-Metz, Rosa; Villas-Boas, Sofia B.; Judge, George G.

2013-01-01T23:59:59.000Z

75

National and Regional Water and Wastewater Rates For Use in Cost-Benefit Models and Evaluations of Water Efficiency Programs  

E-Print Network (OSTI)

a weighted average of the utilitys rate for its first andsurvey asks about the utilitys rate structure (flat vs.0 for all 41 of the flat-rate utilities, was $0.74 per unit.

Fisher, Diane C.; Whitehead, Camilla Dunham; Melody, Moya

2008-01-01T23:59:59.000Z

76

2012 Rate Adjustments  

NLE Websites -- All DOE Office Websites (Extended Search)

Register Notices Meetings Brochure Brochure Addendum Customer Comment Letter Approved Rate Order FERC Confirmation If you have questions, call Rates and Repayment, 800-472-2306...

77

Rail Coal Transportation Rates  

U.S. Energy Information Administration (EIA)

figure data Figure 7 shows the percent change in average real rates for those state-to-state ... Estimated transportation rates for coal delivered to electric ...

78

Effective Rate Period  

NLE Websites -- All DOE Office Websites (Extended Search)

10012012 - 09302013 Mid-Year Changes (if applicable) 10012012 - 09302013 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement 73,381,487...

79

Light-weight communal digital libraries  

Science Conference Proceedings (OSTI)

We describe Kepler, a collection of light-weight utilities that allow for simple and quick digital library construction. Kepler bridges the gap between established, organization-backed digital libraries and groups of researchers that wish to publish ... Keywords: Documentation, Performance, Design

Kurt J. Maly; Michael L. Nelson; Mohammad Zubair; Ashraf Amrou; S. Kothasama; Lan Wang; Richard Luce

2004-06-01T23:59:59.000Z

80

Weighted locally linear embedding for dimension reduction  

Science Conference Proceedings (OSTI)

The low-dimensional representation of high-dimensional data and the concise description of its intrinsic structures are central problems in data analysis. In this paper, an unsupervised learning algorithm called weighted locally linear embedding (WLLE) ... Keywords: Feature extraction, Locally linear embedding, Manifold learning, Nonlinear dimensionality reduction

Yaozhang Pan; Shuzhi Sam Ge; Abdullah Al Mamun

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Information Weighted Consensus for Distributed Estimation in Vision Networks  

E-Print Network (OSTI)

3 Information-weighted Consensus Filter 3.14 Multi-Target Information Consensus 4.1Information-weighted Consensus

Kamal, Ahmed Tashrif

2013-01-01T23:59:59.000Z

82

Magnesium Components Achieve Weight Reduction and Fuel Savings  

NLE Websites -- All DOE Office Websites (Extended Search)

cast mag- nesium can achieve consider- able weight reduction advantages over both steel and aluminum. Furthermore, this favorable weight reduction potential can enable...

83

Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Idle Reduction Technology Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Technology Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Technology Weight Exemption

84

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A motor vehicle equipped with idle reduction or emissions reduction technology may exceed the maximum gross vehicle weight and axle weight

85

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption The maximum gross weight limit and axle weight limit for any vehicle or combination of vehicles equipped with idle reduction technology may exceed

86

LightWeight KerneL  

NLE Websites -- All DOE Office Websites (Extended Search)

Catamount n-Way Catamount n-Way LightWeight KerneL 1 R&D 100 Entry Catamount n-Way LightWeight KerneL 2 R&D 100 Entry Submitting organization Sandia National Laboratories PO Box 5800 Albuquerque, NM 87185-1319 USA Ron Brightwell Phone: (505) 844-2099 Fax: (505) 845-7442 rbbrigh@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. _____________________________ Ron Brightwell Joint entry Operating Systems Research 1527 16th NW #5 Washington, DC 20036 USA Trammell Hudson Phone: (240) 283-1700 Fax: (843) 971-9774 hudson@osresearch.net ProduCt name Catamount N-Way (CNW) Lightweight Kernel brief deSCriPtion CNW is an operating system that exploits existing features of multi-core processors

87

A Geographically Weighted Hedonic Pricing Model  

E-Print Network (OSTI)

Wind power is the most important renewable energy source in many countries today, characterized by a rapid and extensive diffusion since the 1990s. However, it has also triggered much debate with regard to the impact on landscape and vista. Therefore, siting processes of wind farm projects are often accompanied by massive public protest, because of visual and aural impacts on the surrounding area. These mostly negative consequences are often reflected in property values and house prices. The aim of this paper is to investigate the impact of wind farms on the surrounding property values by means of a geographically-weighted hedonic pricing model. By comparing the predictive performance of standard Ordinary Least Squares (OLS) regression models and Geographically Weighted Regression (GWR) models, we find that, mainly due to a local clustering bias, global OLS estimation is inadequate for capturing the impacts of wind farm proximity on

Yasin Sunak; Reinhard Madlener; Yasin Sunak; Reinhard Madlener; Y. Sunak; R. Madlener

2012-01-01T23:59:59.000Z

88

Weight fluctuations of information storage media  

E-Print Network (OSTI)

In this essentially Unsolved Problems of Noise (UPoN) paper we further study the question recently posed in Fluctuation and Noise Letters (December 2007), if there is and interaction between bodies with correlated information content, and weather the observed weight transients during/after changing the information content in memory devices is due to a new type of interaction, a new type of "fifth force", or it is only a classical mechanism. We briefly discuss the issue of the great experimental uncertainty of the Newtonian gravitation constant. We also mention the peculiar experiments about sudden weight changes of humans and animals at the moment of death. The extended monitoring of four 4GB flash drives with no casing and various information content indicate a significant correlation between their weight variations and the fluctuations of ambient humidity. This is an evidence for the role of humidity and hygroscopic components, at least, for long-term weight fluctuations. A sequence of information changing experiments with such a flash drives at stable humidity conditions shows a significant variability of the transients of the absolute mass with some dependence on the information content. Finally, a related new experiment was carried out with olive oil and chilli pepper powder that was dissolved in it while the mass variations were recorded and a positive mass transient of 0.3 milligram was observed for about 10 minutes. The process represents the writing of new random information into a medium. The only classical interpretation of this mechanism would be the compression of trapped air between the grains by the surface tension of the oil, or that of in pores by capillary forces, and the resulting decrease of the Archimedes force due volume reduction.

Laszlo B. Kish

2008-05-27T23:59:59.000Z

89

Texas Gulf Coast Refinery District API Gravity (Weighted Average ...  

U.S. Energy Information Administration (EIA)

Texas Gulf Coast Refinery District API Gravity (Weighted Average) of Crude Oil Input to Refineries (Degree)

90

Texas Gulf Coast Refinery District API Gravity (Weighted ...  

U.S. Energy Information Administration (EIA)

Texas Gulf Coast Refinery District API Gravity (Weighted Average) of Crude Oil Input to Refineries (Degree)

91

Weight control in an automated design environment. [Of aircraft  

SciTech Connect

Results of a program to study weight control in an automated design environment are presented. Automation, computer applications, design coverage and special communication problems are discussed. Results of a tube weight analysis routine, a program of weight control incentives, and results of a special weight reduction program are given.

Staton, R.N.

1987-01-01T23:59:59.000Z

92

Minimizing weighted waiting time variance on a single processor  

Science Conference Proceedings (OSTI)

This paper considers the problem of scheduling n non-preemptive jobs on a single processor. Each job may have different size and weight. The objective is to minimize the weighted waiting time variance (WWTV). It is shown that the proof of one previous ... Keywords: Single processor scheduling, Weighted completion time variance, Weighted waiting time variance

Xiaoyun Xu

2011-11-01T23:59:59.000Z

93

Appalachian No. 1 Refinery District Sulfur Content (Weighted ...  

U.S. Energy Information Administration (EIA)

Appalachian No. 1 Refinery District Sulfur Content (Weighted Average) of Crude Oil Input to Refineries (Percent)

94

From Hydrogen Fuel Stations to Bean Counters, NIST Weights ...  

Science Conference Proceedings (OSTI)

From Hydrogen Fuel Stations to Bean Counters, NIST Weights and Measures Works to Meet Market Needs. ...

2010-08-23T23:59:59.000Z

95

rates | OpenEI  

Open Energy Info (EERE)

rates rates Dataset Summary Description This dataset, compiled by NREL and Ventyx, provides average residential, commercial and industrial electricity rates by zip code for both investor owned utilities (IOU) and non-investor owned utilities. Note: the file includes average rates for each utility, but not the detailed rate structure data found in the database available via the zip-code look-up feature on the OpenEI Utilities page (http://en.openei.org/wiki/Gateway:Utilities). The data was released by NREL/Ventyx in February 2011. Source NREL and Ventyx Date Released February 24th, 2012 (2 years ago) Date Updated Unknown Keywords electric rates rates US utilities Data text/csv icon IOU rates by zipcode (csv, 1.7 MiB) text/csv icon Non-IOU rates by zipcode (csv, 2.1 MiB)

96

Waste Receiving and Processing (WRAP) Facility Weight Scale Analysis Fairbanks Weight Scale Evaluation Results  

SciTech Connect

Fairbanks Weight Scales are used at the Waste Receiving and Processing (WRAP) facility to determine the weight of waste drums as they are received, processed, and shipped. Due to recent problems, discovered during calibration, the WRAP Engineering Department has completed this document which outlines both the investigation of the infeed conveyor scale failure in September of 1999 and recommendations for calibration procedure modifications designed to correct deficiencies in the current procedures.

JOHNSON, M.D.

2000-03-13T23:59:59.000Z

97

Concepts and Applications of Stochastically Weighted Stochastic ...  

E-Print Network (OSTI)

Apr 8, 2011 ... in terms of utility theory (von Neumann and Morgenstern 1947), ...... The arrival and service rates for regular customers are ?a = 15 and a = 8,...

98

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle or combination of vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up to 400

99

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A heavy-duty vehicle that is equipped with qualified idle reduction technology may exceed the Arizona weight limitations specified in Arizona

100

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle equipped with qualified idle reduction technology may exceed the state's gross and axle weight limits by up to 400 pounds to compensate

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A heavy-duty vehicle equipped with an auxiliary power unit may exceed the state's gross vehicle weight limit by up to 400 pounds to compensate for

102

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A vehicle equipped with idle reduction technology may exceed the state's gross, axle, and bridge vehicle weight limits by up to 400 pounds to

103

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with qualified idle reduction technology may exceed the state's vehicle weight limits by up to 400 pounds to compensate

104

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Reduction Weight Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle equipped with a qualified auxiliary power unit (APU) may exceed the state's gross vehicle and axle weight limits by up to 400 pounds to

105

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Reduction Weight Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with qualified idle reduction technology may exceed the state gross and axle weight limits to compensate for the added

106

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Reduction Weight Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with qualified idle reduction technology may exceed the state gross, axle, tandem, or bridge weight limits by up to 400

107

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle or combination of vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up to 400

108

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle equipped with qualifying idle reduction technology may exceed the state's gross vehicle weight limits by up to 400 pounds to compensate

109

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with idle reduction technology may exceed the state gross, axle, and tandem weight limits by up to 400 pounds to account

110

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with idle reduction technology may exceed the gross vehicle or internal bridge weight by the amount equal to the

111

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Reduction Weight Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle or combination of vehicles equipped with idle reduction technology is allowed to exceed the maximum gross vehicle and axle weight

112

Historical Interest Rates  

NLE Websites -- All DOE Office Websites (Extended Search)

Current and Historical Interest Rates Current and Historical Interest Rates The table lists interest rates, from the project's inception through the present, for all projects with repayment supervised by the CRSP MC. The latest available interest rate is used for all future interest rate calculations. The Amistad-Falcon, Collbran, Provo River, and Rio Grande Projects are all assigned the average daily "Yield Rate" calculated by the U.S. Treasury, on an annual basis, for Treasury bonds having terms of 15 years or more remaining to maturity. The calculated yield rate is rounded to the nearest one-eighth of one percent. The yield rate is based upon the bond's interest rate, as well as its market value. The Colorado River Storage Project and its participating projects, Dolores and Seedskadee, are assigned the average daily "Coupon Rate," annualized for the same U.S. Treasury bonds used in "Yield Rate" calculations. The coupon rate is the interest rate that the bond carries upon its face.

113

Tracking the Libor Rate  

E-Print Network (OSTI)

Paper 1108R2 Paper 1108R) Tracking the Libor Rate Rosa M.revision 2013 by author(s). Tracking the Libor Rate Rosa M.providing a methodology for tracking the dynamic integrity

Abrantes-Metz, Rosa; Villas-Boas, Sofia B.; Judge, George G.

2013-01-01T23:59:59.000Z

114

2009 Rate Adjustments  

NLE Websites -- All DOE Office Websites (Extended Search)

provisional rates will be in effect until the Federal Energy Regulatory Commission (FERC) confirms and approves them on a final basis or until they are replaced by other rates....

115

Mouse heart rate  

NLE Websites -- All DOE Office Websites (Extended Search)

Mouse heart rate Name: amj Status: NA Age: NA Location: NA Country: NA Date: Around 1993 Question: Is it possible to get the heart rate of a mouse without special equipment?...

116

Dynamics of heart rate  

Science Conference Proceedings (OSTI)

Heart rate oscillates on several different time scales and has long?term variability in the form of 1/fnoise. The physiological control of heart rate is briefly reviewed

Daniel T. Kaplan; Mario Talajic

1991-01-01T23:59:59.000Z

117

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle equipped with idle reduction technology may exceed the state's

118

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with an auxiliary power unit (APU) or other idle

119

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle equipped with idle reduction technology may exceed the state's

120

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A vehicle equipped with a fully functional idle reduction system designed to reduce fuel use and emissions from engine idling may exceed the maximum

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A vehicle equipped with qualified idle reduction technology may exceed the

122

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any vehicle or combination of vehicles equipped with fully functional idle

123

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A motor vehicle equipped with a fully functional idle reduction system designed to reduce fuel use and emissions from engine idling may exceed the

124

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any heavy-duty vehicle equipped with an auxiliary power unit or other qualified idle reduction technology may exceed the state gross, axle,

125

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption Any motor vehicle equipped with an auxiliary power unit or other idle reduction technology may exceed the gross, single axle, tandem axle, or

126

Alternative Fuels Data Center: Idle Reduction Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Idle Reduction Weight Idle Reduction Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Idle Reduction Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Idle Reduction Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Google Bookmark Alternative Fuels Data Center: Idle Reduction Weight Exemption on Delicious Rank Alternative Fuels Data Center: Idle Reduction Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Idle Reduction Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Idle Reduction Weight Exemption A commercial vehicle equipped with idle reduction technology may exceed the

127

About the Ratings  

NLE Websites -- All DOE Office Websites (Extended Search)

2008 Ratings Changes 2008 Ratings Changes EPA's "New" Fuel Economy Ratings Video about EPA's New Fuel Economy Ratings Windows Media Video (6.8 MB) Quicktime Video (7.8 MB) Text Version EPA changed the way it estimates fuel economy starting with the 2008 model year. This "new" way of estimating fuel economy supplements the previous method by incorporating the effects of Faster speeds and acceleration Air conditioner use Colder outside temperatures What else do I need to know about the "new" ratings? The tests lower MPG estimates for most vehicles. View old/new MPG ratings for a specific vehicle The actual mileage you get will still vary based on your driving habits, traffic conditions, and other factors. All MPG estimates in Find-a-Car have been converted to the new

128

Effective Rate Period  

NLE Websites -- All DOE Office Websites (Extended Search)

Fiscal Year 2014 Fiscal Year 2014 Effective Rate Period As of Beginning of the FY 10/01/2013 - 09/30/2014 Mid-Year Changes (if applicable) 10/01/2013 - 09/30/2014 Power Rates Annual Revenue Requirement Rate Schedule Power Revenue Requirement $73,441,557 CV-F13 Base Resource Revenue Requirement $69,585,875 First Preference Revenue Requirement $3,855,682

129

High Redshift Supernova Rates  

E-Print Network (OSTI)

We use a sample of 42 supernovae detected with the Advanced Camera for Surveys on-board the Hubble Space Telescope as part of the Great Observatories Origins Deep Survey to measure the rate of core collapse supernovae to z~0.7 and type Ia supernovae to z~1.6. This significantly increases the redshift range where supernova rates have been estimated from observations. The rate of core collapse supernovae can be used as an independent probe of the cosmic star formation rate. Based on the observations of 17 core collapse supernovae, we measure an increase in the core collapse supernova rate by a factor of 1.6 in the range 0.3rate. The increase in the rate in this redshift range in consistent with recent measurements of the star formation rate derived from UV-luminosity densities and IR datasets. Based on 25 type Ia supernovae, we find a SN Ia rate that is a factor 3-5 higher at z~1 compared to earlier estimates at lower redshifts (zrate traces a higher star formation rate at redshifts z>1 compared to low redshift. At higher redshift (z>1), we find a suggested decrease in the type Ia rate with redshift. This evolution of the Ia rate with redshift is consistent with a type Ia progenitor model where there is a substantial delay between the formation of the progenitor star and the explosion of the supernova. Assuming that the type Ia progenitor stars have initial main sequence masses 3-8 M_Sun, we find that 5-7% of the available progenitors explode as type Ia supernovae.

Tomas Dahlen; Louis-Gregory Strolger; Adam G. Riess; Bahram Mobasher; Ranga-Ram Chary; Christopher J. Conselice; Henry C. Ferguson; Andrew S. Fruchter; Mauro Giavalisco; Mario Livio; Piero Madau; Nino Panagia; John L. Tonry

2004-06-24T23:59:59.000Z

130

Rate Schedule CPP-2  

NLE Websites -- All DOE Office Websites (Extended Search)

or rate schedule accepted or approved by the Federal Energy Regulatory Commission (FERC) or other regulatory bodies will be passed on to each relevant customer. The FERC's or...

131

Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Vehicle Vehicle (NGV) Weight Exemption to someone by E-mail Share Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on Facebook Tweet about Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on Twitter Bookmark Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on Google Bookmark Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on Delicious Rank Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on Digg Find More places to share Alternative Fuels Data Center: Natural Gas Vehicle (NGV) Weight Exemption on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Natural Gas Vehicle (NGV) Weight Exemption

132

Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Weight Restriction Weight Restriction Increase for Natural Gas Vehicles to someone by E-mail Share Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on Facebook Tweet about Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on Twitter Bookmark Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on Google Bookmark Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on Delicious Rank Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on Digg Find More places to share Alternative Fuels Data Center: Weight Restriction Increase for Natural Gas Vehicles on AddThis.com... More in this section... Federal State Advanced Search

133

Complexity of Counting CSP with Complex Weights  

E-Print Network (OSTI)

We give a complexity dichotomy theorem for the counting Constraint Satisfaction Problem (#CSP in short) with complex weights. To this end, we give three conditions for its tractability. Let F be any finite set of complex-valued functions, then we prove that #CSP(F) is solvable in polynomial time if all three conditions are satisfied; and is #P-hard otherwise. Our complexity dichotomy generalizes a long series of important results on counting problems: (a) the problem of counting graph homomorphisms is the special case when there is a single symmetric binary function in F; (b) the problem of counting directed graph homomorphisms is the special case when there is a single not-necessarily-symmetric binary function in F; and (c) the standard form of #CSP is when all functions in F take values in {0,1}.

Cai, Jin-Yi

2011-01-01T23:59:59.000Z

134

Insight REV dbk.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

67 lbs 67 lbs Delivered Curb Weight: 1959 lbs Distribution F/R: 61/39 % GVWR: 2380 lbs GAWR F/R: 1355/1035 lbs Payload: 411 lbs Performance Goal: 400 lbs DIMENSIONS Wheelbase: 94.5 inches Track F/R: 56.5/52.2 inches Length: 155.1 inches Width: 66.7 inches Height: 51.5 inches Ground Clearance: 4.6 inches Performance Goal: 5.0 inches TIRES Tire Mfg: Bridgestone Tire Model: Potenza Tire Size: 165/65R14

135

Losing Weight with ICME: Accelerating Cost and Performance ...  

Science Conference Proceedings (OSTI)

Symposium, Integrated Computational Materials Engineering: The Customer's Point of View. Presentation Title, Losing Weight with ICME: Accelerating Cost and ...

136

Molecular Weight Effects in Guar Gum Adsorption on Talc  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Water and Energy in Mineral Processing. Presentation Title, Molecular Weight...

137

A weighted tag similarity measure based on a collaborative weight model  

Science Conference Proceedings (OSTI)

The problem of measuring semantic relatedness between social tags remains largely open. Given the structure of social bookmarking systems, similarity measures need to be addressed from a social bookmarking systems perspective. We address the fundamental ... Keywords: similarity measures, tag similarity, tag weighting, tagging, vector space model

Gokavarapu Srinivas; Niket Tandon; Vasudeva Varma

2010-10-01T23:59:59.000Z

138

The Complexity of Weighted Boolean #CSP , Sangxia Huang2  

E-Print Network (OSTI)

The Complexity of Weighted Boolean #CSP Modulo k Heng Guo1 , Sangxia Huang2 , Pinyan Lu3@gmail.com Abstract We prove a complexity dichotomy theorem for counting weighted Boolean CSP modulo k for any similar to the one for the complex weighted Boolean #CSP, found by [Cai, Lu and Xia, STOC 2009]. Then we

Paris-Sud XI, Université de

139

Robust and Stochastically Weighted Multiobjective Optimization Models and Reformulations  

Science Conference Proceedings (OSTI)

We introduce and study a family of models for multiexpert multiobjective/criteria decision making. These models use a concept of weight robustness to generate a risk-averse decision. In particular, the multiexpert multicriteria robust weighted sum approach ... Keywords: McRow, Pareto optimality, multicriterion optimization, multiexpert optimization, robust optimization, weighted sum method

Jian Hu; Sanjay Mehrotra

2012-07-01T23:59:59.000Z

140

Exchange Rates and Fundamentals  

E-Print Network (OSTI)

We show analytically that in a rational expectations present-value model, an asset price manifests nearrandom walk behavior if fundamentals are I(1) and the factor for discounting future fundamentals is near one. We argue that this result helps explain the well-known puzzle that fundamental variables such as relative money supplies, outputs, inflation, and interest rates provide little help in predicting changes in floating exchange rates. As well, we show that the data do exhibit a related link suggested by standard modelsthat the exchange rate helps predict these fundamentals. The implication is that exchange rates and fundamentals are linked in a way that is broadly consistent with asset-pricing models of the exchange rate. I.

Charles Engel; Kenneth D. West

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Alternative Fuel Alternative Fuel Vehicle (AFV) Weight Limit Exemption to someone by E-mail Share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on Facebook Tweet about Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on Twitter Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on Google Bookmark Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on Delicious Rank Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on Digg Find More places to share Alternative Fuels Data Center: Alternative Fuel Vehicle (AFV) Weight Limit Exemption on AddThis.com... More in this section... Federal State Advanced Search

142

OpenEI - rates  

Open Energy Info (EERE)

U.S. Electric Utility U.S. Electric Utility Companies and Rates: Look-up by Zipcode (Feb 2011) http://en.openei.org/datasets/node/899 This dataset, compiled by NREL and Ventyx, provides average residential, commercial and industrial electricity rates by zip code for both investor owned utilities (IOU) and non-investor owned utilities. Note: the file includes average rates for each utility, but not the detailed rate structure data found in the database available via the zip-code look-up feature on the OpenEI Utilities page (http://en.openei.org/wiki/Gateway:Utilities). The data was released by NREL/Ventyx in February 2011.

143

<RatesMiscInfo>  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates MISCELLANEOUS INFORMATION Power Supply Report June 2013 (53kb pdf) May 2013 (53kb pdf) April 2013 (52kb pdf) March 2013 (54kb pdf) February 2013 (54kb pdf) January 2013 (54kb...

144

Heat Rate Program Guidelines  

Science Conference Proceedings (OSTI)

Power plant facilities with performance or heat rate improvement programs perform better than those that do not have those programs. A heat rate improvement program typically provides sufficient information for decision making with respect to timely maintenance actions and/or operational adjustments. Monitoring the performance of any power plant component includes the trending of parameters that also describe the performance of other plant components, providing insight and information on improving ...

2012-12-31T23:59:59.000Z

145

Light-weight radioisotope heater impact tests  

SciTech Connect

The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

Reimus, M.A.H.; Rinehart, G.H.; Herrera, A. [and others

1998-12-31T23:59:59.000Z

146

Cat Heart Rate Monitoring  

NLE Websites -- All DOE Office Websites (Extended Search)

Cat Heart Rate Monitoring Cat Heart Rate Monitoring Name: Shakti Status: student Grade: 9-12 Location: TX Country: USA Date: Summer 2010 Question: What is the best way to find a cat's heart rate using a stethoscope? Because I have tried to hear their heart beat but their purring is all I can hear. If I shouldn't use a stethoscope, then what should I use? Replies: Hi Shakti! If you want to use a stethoscope, the trick is to get your cat to stop purring. Two good ways that I have found to help stop the purring 1. Cover their nose (generally cats don't like this and will stop purring) or 2. Put on the tap to drip or lightly stream water (also, they generally don't like this and will stop purring). Alternatively, you can get their heart rate from feeling their pulse. A good place to try to feel a pulse is right where the leg attaches to the abdomen - in an area called the inguinal region. Now granted there are some heart conditions that will cause an animals pulse and their heart rates don't match up, and it's hard to feel if you have a fat cat, but it's a good place to try if you are really trying to get a heart rate in a healthy kitty!

147

Weight Distribution of a Class of Binary Linear Block Codes Formed from RCPC Codes  

E-Print Network (OSTI)

of a convolutional code is used to describe the state transition possibilities and corresponding output weight of the code [2]. For a convolutional code with rate R = 1/S and memory M, the transition matrix is a 2M by 2M 0 0 D D . (2) As stated in [2], the (i, j)-th element of the K-th power of A, (AK )i,j , gives

Cosman, Pamela C.

148

Trade, Interdependence and Exchange Rates  

E-Print Network (OSTI)

period is 1971-2000. All inflation rates and predictions areof Goods and Real Exchange Rate Fluc- tuations, mimeo [5]Between Trade and Exchange Rate Volatility, mimeo [6

Fitzgerald, Doireann

2004-01-01T23:59:59.000Z

149

Exchange Rates, Information, and Crises  

E-Print Network (OSTI)

3 Intervention and Exchange Rate Misalignment 4 Conclusion 5explain the exchange rate determination puzzle? Americanrisk to defend the exchange rate. Universitat Trier Working

Fernholz, Ricardo Turrin

2011-01-01T23:59:59.000Z

150

High flexibility, noncollapsing light weight hose  

DOE Patents (OSTI)

This invention relates generally to a high-flexibility, light weight, noncollapsing hose and more particularly to such a hose having a large size and particularly useful as equipment draining a radioactively contaminated fluid through a noncontaiminated, isolated and restricted space with high confidence against kinking, collapse, or leaking even with large relative motion between the inlet and outlet ends of the hose. In the operation of nuclear facilities, such as nuclear reactors, processing plants for nuclear fuels and related materials, and chemical processing plants, for example, it is necessary to handle radioactively and/or chemically contaminated fluids which in many instances must be conducted, such as for draining purposes, through a noncontaminated, isolated area. Conduction of such contaminated fluids through uncontaminated environments in practice requires the highest confidence that the hose will not kink, collapse, break, or leak even though the hose may be subject to a large amount of motion relative to the inlet and outlet ends of the hose. Any such breaking, or leaking would result in undesirable contamination of the area through which the hose passes which could result in major damage and/or in the requirement to shut down the operation for cleanup and decontamination processing of the area. Additional problems are also encountered in processing plants for contaminated materials due to the fact that hoses conducting the contaminated liquids or gases pass through inaccessible, restricted spaces requiring extreme flexibility in the hose, but with the assurance that the hose will neither kink nor collapse to close off the flow.

Williams, D.A.

1991-02-01T23:59:59.000Z

151

Mythology of rate design  

SciTech Connect

If power rates are determined by marginal costs with clear signals to the consumer, then the load curve will regulate itself without burdening the public with ethical and patriotic issues. Manipulation of the load factor will only cause hardship and inconvenience, but a choice of rates will allow consumers to determine their own balance between rates and convenience. It makes sense to charge consumers the true cost rather than having the same rate apply during a 24-hour period when costs are not uniform. Discussions of how to determine equitable rate structures flounder because we cannot define equity. Economists, who base their recommendations on the assumption that income distribution is reasonable, believe marginal-cost pricing allows the customer to save whatever the utility is saving. Such a system is economically efficient in that the utility charges 100 percent-load-factor consumers according to a base load plant, while charging peak and offpeak consumers what it costs to add them to the system. Adjustment of prices to cause a minimal distortion of the market is the economists' general rule for handling the balancing of cost increases and regulated profits. (DCK)

Streiter, S.H.

1977-01-01T23:59:59.000Z

152

BCP Annual Rate Process  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 BCP Annual Rate Process 2013 BCP Annual Rate Process Informal Process Rate Activity Schedule (doc) Informal Customer Meeting Thursday March 6, 2013 at 10:30 A.M. Conf Rms 3&4 Informal Customer Meeting Presentation (Pdf) PRS Executive Summary (Mar 07, 2013) (Pdf) FY2014 Final Ten Year Operating Plan PRS Executive Summary (PDF) FORM for Foreign Visits (doc) Formal Process Initial Federal Register Notice (pdf) Public Information Forum March 27,2013 at 10:30 A.M. Conf Rms3&4 Customer Meeting Presentation PIF Presentation (PPT) Presentation Details (pdf) Reclamation Fund Status Report PIF PRS Executive Summary (pdf) PIF Transcripts (PDF) Visitor Center Cost Analysis Questions - Responses Public Comment Forum April 10, 2013 at 10:30 A.M. Conf Rms3&4 PCF Transcripts Customer Letters

153

Multiple System Rate Process  

NLE Websites -- All DOE Office Websites (Extended Search)

DSW Multiple System Transmission Rate Process DSW Multiple System Transmission Rate Process Federal Register Notice Withdrawing Rate Proposal (PDF) Formal Process Extension Federal Register Notice (PDF) Customer Savings Under Various MSTR (XLS) Public Information Forum March 29, 2005 Customer Meeting Overview (Power Point) Customer Meeting Overview (PDF) Customer Meeting Transcript (PDF) Public Comment Forum April 6, 2005 Customer Meeting Transcript (PDF) Response Letter 5-17-05 (PDF) Customer Letters Tonopah ID-5/25/05 (PDF) APS-5/26/05 (PDF) SRP-5/27/05 (PDF) RSLynch-6/1/05 (PDF) KRSaline-6/1/05 (PDF) Formal Process Federal Register Notice (Word) Federal Register Notice (PDF) Brochure (Word) Appendices to Brochure: A B C D E1 E2 F1 F2 GH Public Information Forum July 14, 2004 Customer Meeting Overview (Power Point)

154

Upper Great Plains Rates information  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates and Repayment Services Rates and Repayment Services Rates 2010 Firm Power Rate (effective January 1, 2010) Rate Adjustments 2010 Firm Power Rate Adjustment 2009 Firm Power Rate Adjustment IS Rate Adjustments Rate Adjustment Process Rate Orders Signed, December 23, 2009 (16kb pdf) Announcements Firm Electric Service Customer Letter - Preliminary Review of Drought Adder Component, June 27, 2013 (74kb pdf) Customer Letter - Final Notice of Drought Adder Component, October 2, 2013 (68kb pdf) Integrated System (IS) Rates 2014 IS Rates Customer Information Meeting Presentation, October 15, 2013 (611kb pdf) Customer Letter - Notification of 2014 Rates, September 13, 2013 (160kb pdf) 2014 Transmission and Ancillary Services Rate Calculation and 2012 Rate True-up Calculation (4.9mb pdf) 2013 IS Rates

155

LAP Transmission Rate  

NLE Websites -- All DOE Office Websites (Extended Search)

LAP Transmission Rate 4.50 4.00 3.82 3.50 3.00 of 2.50 c 0 2.I2 2.68 I 3: 2.00 1.50 1.00 0.50 0.00 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012...

156

Natural Gas Conveyance and Rates  

Reports and Publications (EIA)

Natural gas transportation market; Competition vs. market power; Rate structures Cost-of-service Performance based rates

Information Center

2001-02-01T23:59:59.000Z

157

Full length article: Weighted polynomial inequalities in the complex plane  

Science Conference Proceedings (OSTI)

We establish weighted L"p,1@?pKeywords: Bernstein inequality, Marcinkiewicz inequality, Nikolskii inequality, Polynomial, Quasismooth arc, Remez inequality

Vladimir Andrievskii

2012-09-01T23:59:59.000Z

158

Short-Term Energy Outlook Supplement: Energy-weighted industrial...  

U.S. Energy Information Administration (EIA) Indexed Site

Short-Term Energy Outlook Supplement: Energy-weighted industrial production indices December 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy...

159

In High Gear: Weights and Measures Week 2013  

Science Conference Proceedings (OSTI)

... the fuel for your vehicle to a cab ... for vehicles using alternative fuels, including electric vehicles. ... groups and regulated industries celebrate Weights ...

2013-03-05T23:59:59.000Z

160

Materials Development for Vehicle Weight Reduction and the ...  

Science Conference Proceedings (OSTI)

For example, weight reduction can also enable wider use of electric and hybrid drive vehicles by improving range or reducing battery size. Heavy-duty trucks can ...

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Light-Weight Analyzer For Odor Recognition - Energy Innovation ...  

The invention provides a light weight analyzer, e.g., detector, capable of locating clandestine graves. The detector utilizes the very specific and unique chemicals ...

162

Plastic Products Weights in MSW by Category, 2005  

U.S. Energy Information Administration (EIA)

Plastic Products Weights in Municipal Solid Waste (MSW) by Category, 2005 (Thousand Tons) ... with energy recovery, discards to landfill, and other disposal.

163

Wt% = Weight percent of undissolved solids in the slurry = Density ...  

high-level radioactive waste stored in underground, tanks at the Hanford site. The ability to continuously monitor the solids weight percent of mixed slurries in these

164

Rail Coal Transportation Rates  

U.S. Energy Information Administration (EIA) Indexed Site

reports reports Coal Transportation Rates to the Electric Power Sector With Data through 2010 | Release Date: November 16, 2012 | Next Release Date: December 2013 | Correction Previous editions Year: 2011 2004 Go Figure 1. Deliveries from major coal basins to electric power plants by rail, 2010 Background In this latest release of Coal Transportation Rates to the Electric Power Sector, the U.S. Energy Information Administration (EIA) significantly expands upon prior versions of this report with the incorporation of new EIA survey data. Figure 1. Percent of total U.S. rail shipments represented in data figure data Previously, EIA relied solely on data from the U.S. Surface Transportation Board (STB), specifically their confidential Carload Waybill Sample. While valuable, due to the statistical nature of the Waybill data,

165

Plant Tumor Growth Rates  

NLE Websites -- All DOE Office Websites (Extended Search)

Plant Tumor Growth Rates Plant Tumor Growth Rates Name: Gina and Maria Location: N/A Country: N/A Date: N/A Question: We are doing a science fair project on if B. Carotene, Green tea, and Grape Seed Extract helps plants against the crown gall disease. We injected sunflowers with agrobacterium tum. one week ago (Sun. Feb. 27, 2000). Our questions is how long will it take for the tumors to grow? We scratched the surface of the stems and injected the agrobacterium in the wound. Also which do you think, in your opinion, will do the best, if any? Our science fair is April 13, do you think we'll have growth before then, atleast enough time to do our conclusion and results? Thank you, any information you forward will be very helpful. Replies: Sunflowers form galls relatively quickly. I usually get them in two weeks at least. Good luck.

166

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

Jan. '99 to Feb. '99: -1.7% Feb. '98 to Feb. '99: +19.8% YTD '98 to YTD '99: +15.0% 4,100 4,400 4,700 5,000 5,300 5,600 5,900 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons U.S. Distillate Fuel Sales 2011 2012 2013 Adjusted Growth Rates* Jul '13 to Aug '13: 2.5% Aug '12 to Aug '13: -1.3% YTD '12 to YTD '13: 1.5% 300 400 500 600 700 800 900 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons U.S. Residual Fuel Sales 2011 2012 2013 Adjusted Growth Rates* Jul '13 to Aug '13: -0.8%

167

Adjusted Growth Rates* Jan.  

U.S. Energy Information Administration (EIA) Indexed Site

Adjusted Adjusted Growth Rates* Jan. '99 to Feb. '99: -1.7% Feb. '98 to Feb. '99: +19.8% YTD '98 to YTD '99: +15.0% U.S. Distillate Fuel Sales 3,000 3,500 4,000 4,500 5,000 5,500 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1998 1999 2000 Adjusted Growth Rates* Dec '99 to Jan '00: -7.4% Jan '99 to Jan '00: -0.1% YTD '99 to YTD '00: -0.1% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1998 1999 2000 Adjusted Growth Rates* Dec '99 to Jan '00: -16.8% Jan '99 to Jan '00: -3.2% YTD '99 to YTD '00: -3.2% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1998 1999 2000 Adjusted Growth Rates* Dec '99 to Jan '00: -9.3% Jan '99 to Jan '00: +3.5% YTD '99 to YTD '00: +3.5% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul

168

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

July '99 to Aug. '99: +4.7% July '99 to Aug. '99: +4.7% Aug. '98 to Aug. '99: +1.3% YTD '98 to YTD '99: +4.7% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* July '99 to Aug. '99: -1.9% Aug. '98 to Aug. '99: -0.4% YTD '98 to YTD '99: +0.9% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* July '99 to Aug. '99: -0.1% Aug. '98 to Aug. '99: -1.4% YTD '98 to YTD '99: -0.7% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* July '99 to Aug. '99: +22.3% Aug. '98 to Aug. '99: +21.1%

169

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

Aug '99 to Sep '99: +4.9% Aug '99 to Sep '99: +4.9% Sep '98 to Sep '99: +4.7% YTD '98 to YTD '99: +4.7% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Aug '99 to Sep '99: -2.4% Sep '98 to Sep '99: +0.4% YTD '98 to YTD '99: +1.3% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Aug '99 to Sep '99: -2.1% Sep '98 to Sep '99: +4.6% YTD '98 to YTD '99: 0.0% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Aug '99 to Sep '99: +7.3% Sep '98 to Sep '99: +8.4% YTD '98 to YTD '99: +8.3%

170

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

June '99 to July '99: -5.4% June '99 to July '99: -5.4% July '98 to July '99: +3.3% YTD '98 to YTD '99: +6.3% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* June '99 to July '99: -0.5% July '98 to July '99: -0.4% YTD '98 to YTD '99: +1.1% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* June '99 to July '99: +0.5% July '98 to July '99: +1.0% YTD '98 to YTD '99: -0.3% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* June '99 to July '99: +1.5% July '98 to July '99: +10.2% YTD '98 to YTD '99: +7.2%

171

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

Nov '99 to Dec '99: +5.3% Nov '99 to Dec '99: +5.3% Dec '98 to Dec '99: +8.7% YTD '98 to YTD '99: +5.0% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Nov '99 to Dec '99: +6.0% Dec '98 to Dec '99: +4.5% YTD '98 to YTD '99: +1.3% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Nov '99 to Dec '99: +2.4% Dec '98 to Dec '99: +3.0% YTD '98 to YTD '99: +0.9% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Nov '99 to Dec '99: +32.3% Dec '98 to Dec '99: +2.0% YTD '98 to YTD '99: +5.5%

172

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

Oct '99 to Nov '99: +0.1% Oct '99 to Nov '99: +0.1% Nov '98 to Nov '99: +5.5% YTD '98 to YTD '99: +4.5% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Oct '99 to Nov '99: -0.7% Nov '98 to Nov '99: +1.7% YTD '98 to YTD '99: +1.1% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Oct '99 to Nov '99: +2.5% Nov '98 to Nov '99: +6.0% YTD '98 to YTD '99: +0.8% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Oct '99 to Nov '99: +9.7% Nov '98 to Nov '99: +2.2% YTD '98 to YTD '99: +6.2%

173

Adjusted Growth Rates*  

U.S. Energy Information Administration (EIA) Indexed Site

Sep '99 to Oct '99: +3.9% Sep '99 to Oct '99: +3.9% Oct '98 to Oct '99: +2.3% YTD '98 to YTD '99: +4.4% U.S. Motor Gasoline Sales 8,000 9,000 10,000 11,000 12,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Sep '99 to Oct '99: -0.2% Oct '98 to Oct '99: -0.9% YTD '98 to YTD '99: +1.0% U.S. Kerosene-Type Jet Fuel Sales 1,500 1,600 1,700 1,800 1,900 2,000 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Sep '99 to Oct '99: -1.9% Oct '98 to Oct '99: -0.7% YTD '98 to YTD '99: +0.4% U.S. Propane Sales 600 800 1,000 1,200 1,400 1,600 1,800 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Millions of Gallons 1997 1998 1999 Adjusted Growth Rates* Sep '99 to Oct '99: -2.1% Oct '98 to Oct '99: -6.4% YTD '98 to YTD '99: +6.6%

174

The Complexity of Weighted Boolean #CSP with Mixed Signs  

E-Print Network (OSTI)

The Complexity of Weighted Boolean #CSP with Mixed Signs Andrei Bulatova , Martin Dyerb , Leslie constraint satisfaction problem (CSP), which corresponds to the case where all functions in have range {0, 1}. The problem we consider here is to compute the partition function of a given instance of weighted CSP; that is

Bulatov, Andrei

175

A liquidity-weighted GARCH model for empirical equity series  

Science Conference Proceedings (OSTI)

This paper develops a new GARCH-family model (named Liquidity-Weighted GARCH or LW-GARCH) for explaining the volatility behaviour of financial time series, with an application on empirical international equity series (consisting both of stock market ... Keywords: ARCH-LM test, Granger causality test, conditional volatility, empirical equity returns, liquidity-weighted GARCH

Cristiana Tudor

2011-07-01T23:59:59.000Z

176

Properties of the hopfield model with weighted patterns  

Science Conference Proceedings (OSTI)

The standard Hopfield model is generalized to the case when input patterns are provided with weights that are proportional to the frequencies of patterns occurrence at the learning process. The main equation is derived by methods of statistical physics, ... Keywords: catastrophic forgetting, hopfield model, weighted patterns

Iakov Karandashev; Boris Kryzhanovsky; Leonid Litinskii

2012-09-01T23:59:59.000Z

177

Weighted trapezoidal approximation-preserving cores of a fuzzy number  

Science Conference Proceedings (OSTI)

Recently, various researchers have proved that approximations of fuzzy numbers may fail to be fuzzy numbers. In this contribution, we suggest a new weighted trapezoidal approximation of an arbitrary fuzzy number, which preserves its cores. We prove that ... Keywords: Core of fuzzy number, Fuzzy numbers, Trapezoidal fuzzy numbers, Weighted approximation

S. Abbasbandy; T. Hajjari

2010-05-01T23:59:59.000Z

178

Weighted Distance Transforms for Images Using Elongated Voxel Grids  

Science Conference Proceedings (OSTI)

In this paper we investigate weighted distance transforms in 3D images using elongated voxel grids. We use a local neighbourhood of size 3 3 3 and assume a voxel grid with equal resolution along two axes and lower along the third. The weights (local ...

Ida-Maria Sintorn; Gunilla Borgefors

2002-04-01T23:59:59.000Z

179

Addressing diverse corpora with cluster-based term weighting  

Science Conference Proceedings (OSTI)

Highly heterogeneous collections present difficulties to term weighting models that are informed by corpus-level frequencies. Collections which span multiple languages or large time periods do not provide realistic statistics on which words are interesting ... Keywords: diverse corpora, multilingual retrieval, term weighting

Peter Organisciak

2013-07-01T23:59:59.000Z

180

Secrets of adaptive support weight techniques for local stereo matching  

Science Conference Proceedings (OSTI)

In recent years, local stereo matching algorithms have again become very popular in the stereo community. This is mainly due to the introduction of adaptive support weight algorithms that can for the first time produce results that are on par with global ... Keywords: Adaptive support weights, Evaluation study, Local stereo matching

Asmaa Hosni; Michael Bleyer; Margrit Gelautz

2013-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Rate Adjustments and Public Involvement  

NLE Websites -- All DOE Office Websites (Extended Search)

Rate Adjustments and Public Involvement Documents Rate Adjustments and Public Involvement Documents CRSP Transmission 9/16/2013 WAPA-161 FRN, CRSP transmission and ancillary services rates extension Letter announcing two-year extension to CRSP transmission and ancillary services rates Letter announcing revised CRSP transmission rates for FY 2014 Accompanying calculation table for FY 2014 CRSP transmission rate letter Letter announcing revised CRSP transmission rates for FY 2013 Letter announcing revised CRSP transmission rates for FY 2012 Letter announcing revised CRSP transmission rates for FY 2011 Letter announcing revised CRSP transmission rates for FY 2010 SLCA/IP 9/16/2013 WAPA-161 FRN, SLCA/IP firm power rate extension Letter announcing two-year extension to SLCA/IP firm power rate SLCA/IP Tentative Rate Adjustment Schedule

182

RATES OF RETURN AND ALTERNATIVE MEASURES OF  

E-Print Network (OSTI)

We employ the EU KLEMS database to estimate the real rate of return to capital in 14 countries (11 in the EU, three outside the EU) in 10 branches of the market economy plus the market economy as a whole. Our measure of capital is an aggregate over seven types of asset: three ICT assets and four non-ICT assets. The real rate of return in the market economy does not vary very much across countries, the extremes being Spain (high) and Italy (low). The real rate appears to be trendless in most countries. Within each country however, the rate varies widely across the 10 branches, often being implausibly high or low. We also estimate the growth of capital services by two different methods: ex-post and ex-ante, and the contribution of capital to output growth by three methods: ex-post, ex-ante and hybrid. The ex-ante method uses an estimate of the required rate of return for each country instead of the actual, average rate of return to calculate user costs and also employs the expected growth of asset prices rather than the actual growth. These estimates are derived from exactly the same data as for the ex-post method, ie without any extraneous data being employed. For estimating the contribution of capital to output growth, the ex-ante method uses ex-ante profit as the weight, while both the ex-post and the hybrid method use ex-post profit. We find that the three methods produce very similar results at the market economy level. But differences are much larger at the branch level, particularly between the ex-post and ex-ante methods.

Nicholas Oulton; Ana Rincon-aznar

2009-01-01T23:59:59.000Z

183

Radioactive Elements in the Standard Atomic Weights Table.  

Science Conference Proceedings (OSTI)

In the 1949 Report of the Atomic Weights Commission, a series of new elements were added to the Atomic Weights Table. Since these elements had been produced in the laboratory and were not discovered in nature, the atomic weight value of these artificial products would depend upon the production method. Since atomic weight is a property of an element as it occurs in nature, it would be incorrect to assign an atomic weight value to that element. As a result of that discussion, the Commission decided to provide only the mass number of the most stable (or longest-lived) known isotope as the number to be associated with these entries in the Atomic Weights Table. As a function of time, the mass number associated with various elements has changed as longer-lived isotopes of a particular element has been found in nature, or as improved half-life values of an element's isotopes might cause a shift in the longest-lived isotope from one mass to another. In the 1957 Report of the Atomic Weights Commission, it was decided to discontinue the listing of the mass number in the Atomic Weights Table on the grounds that the kind of information supplied by the mass number is inconsistent with the primary purpose of the Table, i.e., to provide accurate values of 'these constants' for use in various chemical calculations. In addition to the Table of Atomic Weights, the Commission included an auxiliary Table of Radioactive Elements for the first time, where the entry would be the isotope of that element which was the most stable, i.e., the one with the longest known half-life. In their 1973 Report, the Commission noted that the users of the main Table of Atomic Weights were dissatisfied with the omission of values for some elements in that Table and it was decided to reintroduce the mass number for the radioactive elements into the main Table. In their 1983 Report, the Commission decided that radioactive elements were considered to lack a characteristic terrestrial isotopic composition, from which an atomic weight value could be calculated to five or more figure accuracy, without prior knowledge of the sample involved. These elements were again listed in the Atomic Weights Table with no further information, i.e., with no mass number or atomic weight value.

Holden,N.E.

2007-08-04T23:59:59.000Z

184

PULSE RATE DIVIDER  

DOE Patents (OSTI)

A compact pulse-rate divider circuit affording low impedance output and high input pulse repetition rates is described. The circuit features a single secondary emission tube having a capacitor interposed between its dynode and its control grid. An output pulse is produced at the anode of the tube each time an incoming pulse at the control grid drives the tube above cutoff and the duration of each output pulse corresponds to the charging time of the capacitor. Pulses incoming during the time the grid bias established by the discharging capacitor is sufficiently negative that the pulses are unable to drive the tube above cutoff do not produce output pulses at the anode; these pulses are lost and a dividing action is thus produced by the circuit. The time constant of the discharge path may be vanied to vary in turn the division ratio of the circuit; the time constant of the charging circuit may be varied to vary the width of the output pulses. (AEC)

McDonald, H.C. Jr.

1962-12-18T23:59:59.000Z

185

Survey of innovative rates, 1991  

SciTech Connect

Current innovative rate data from 135 major utilities throughout the United States were gathered and analyzed. Over 1000 innovative rates that were in use by the utilities in 1990 and 1991 were identified, abstracted and entered into a database. Survey results indicate that over 616 million MWh were sold to the nearly five million customers using the innovative rates offered. From an annual sales perspective, the most widely used rates are demand-side management rates -- rates intended to change customer energy use -- and rates that are market-driven.'' The survey identified 525 demand-side management rates serving our four million customers with reported sales of approximately 520 million MWh. These rates serve over 80% of the total innovative rate customers and account for 84% of the total MWh sales. Also important in terms of MWh sales they represent are market-driven rates, which accounted for sales of 48 million MWh in 1990. Both demand-side management and market-driven rates show a 20% customer growth rate between 1988 and 1990. Other innovative rates examined in the survey included: prepaid service; load retention incentive rates; technology specific rates; and those rates related expressly to non-utility generators -- namely buy-back and standby rates.

White, L.J.; Wakefield, R.A.; McVicker, C.M.

1992-04-01T23:59:59.000Z

186

Survey of innovative rates, 1991  

Science Conference Proceedings (OSTI)

Current innovative rate data from 135 major utilities throughout the United States were gathered and analyzed. Over 1000 innovative rates that were in use by the utilities in 1990 and 1991 were identified, abstracted and entered into a database. Survey results indicate that over 616 million MWh were sold to the nearly five million customers using the innovative rates offered. From an annual sales perspective, the most widely used rates are demand-side management rates -- rates intended to change customer energy use -- and rates that are market-driven.'' The survey identified 525 demand-side management rates serving our four million customers with reported sales of approximately 520 million MWh. These rates serve over 80% of the total innovative rate customers and account for 84% of the total MWh sales. Also important in terms of the MWh sales they represent are market-driven rates, which accounted for sales of 48 million MWh in 1990. Both demand-side management and market-driven rates show a 20% customer growth rate between 1988 and 1990. Other innovative rates examined in the survey included: prepaid service; load retention incentive rates; technology specific rates; and those rates related expressly to non-utility generators -- namely buy-back and standby rates.

White, L.J.; Wakefield, R.A.; McVicker, C.M.

1992-04-01T23:59:59.000Z

187

FY06 High Strength Weight Reduction Materials Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

HigH StrengtH HigH StrengtH WeigHt reduction MaterialS U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies 1000 Independence Avenue S.W. Washington, DC 20585-0121 FY 2006 Progress Report for High Strength Weight Reduction Materials Energy Efficiency and Renewable Energy Office of FreedomCAR and Vehicle Technologies Advanced Materials Technologies Edward Wall Program Manager, OFCVT Rogelio Sullivan Advanced Materials Technologies Team Leader James Eberhardt Chief Scientist March 2006 High Strength Weight Reduction Materials FY 2006 Progress Report CONTENTS 1. INTRODUCTION................................................................................................................................... 1 2. MATERIALS DEVELOPMENT .......................................................................................................... 3

188

Microsoft Word - solcar95.html  

NLE Websites -- All DOE Office Websites (Extended Search)

FORCE FORCE VEHICLE SPECIFICATIONS CONVERTED VEHICLE Base Vehicle: 1995 Geo Metro VIN:2C1MR529XS6783464 Seatbelt Positions: Three Standard Features: Power Brakes Front Disk Brakes Front Wheel Drive Dual Air Bags AM/FM Stereo Radio w/Cassette Electric Heater Options as Tested: None BATTERY Manufacturer: GM Ovonic Type: 13.2EV85 Nickel Metal Hydride Number of Modules: 14 Weight of Module: 18 kg Weight of Pack(s): 254 kg Pack Locations: Undertrunk/Underhood Nominal Module Voltage: 13.2 V Nominal System Voltage: 185 V Nominal Capacity (1C): 85 Ah WEIGHTS Design Curb Weight: 2246 lbs Delivered Curb Weight: 2304 lbs Distribution F/R: 50/50 % GVWR: 2755 lbs GAWR F/R: 1432/1366 lbs Payload: 451 lbs Performance Goal: 664 lbs DIMENSIONS Wheelbase: 93.5 inches

189

A Hybrid DDM Algorithm Based on Weight Function  

Science Conference Proceedings (OSTI)

The High Level Architecture (HLA) has become the focus of distributed interactive simulation's general technology frame. Data Distribution Management (DDM), one of the six services in Run Time Infrastructure (RTI), provides data filtering mechanism to ... Keywords: HLA, DDM, Weight Function

Guisheng Zhang; Xia Zhang; Deyu Li

2008-10-01T23:59:59.000Z

190

Extending the BLEU MT evaluation method with frequency weightings  

Science Conference Proceedings (OSTI)

We present the results of an experiment on extending the automatic method of Machine Translation evaluation BLUE with statistical weights for lexical items, such as tf.idf scores. We show that this extension gives additional information about evaluated ...

Bogdan Babych; Anthony Hartley

2004-07-01T23:59:59.000Z

191

An assessment of the MCNP4C weight window  

Science Conference Proceedings (OSTI)

A new, enhanced weight window generator suite has been developed for MCNP version 4C. The new generator correctly estimates importances in either a user-specified, geometry-independent, orthogonal grid or in MCNP geometric cells. The geometry-independent option alleviates the need to subdivide the MCNP cell geometry for variance reduction purposes. In addition, the new suite corrects several pathologies in the existing MCNP weight window generator. The new generator is applied in a set of five variance reduction problems. The improved generator is compared with the weight window generator applied in MCNP4B. The benefits of the new methodology are highlighted, along with a description of its limitations. The authors also provide recommendations for utilization of the weight window generator.

Christopher N. Culbertson; John S. Hendricks

1999-12-01T23:59:59.000Z

192

Variability of Population-Weighted Seasonal Heating Degree Days  

Science Conference Proceedings (OSTI)

Regional and national heating fuel demand is related to both weather and population density. This study analyzes the variability of population-weighted, seasonal heating degree days for the coterminous 48 states. A risk assessment of unusual ...

Nathaniel B. Guttman

1983-03-01T23:59:59.000Z

193

Theory of Optimal Weighting of Data to Detect Climatic Change  

Science Conference Proceedings (OSTI)

A search for climatic change predicted by climate models can easily yield unconvincing results because of climatic noise, the inherent, unpredictable variability of time-averaged atmospheric data. We describe a weighted average of data that ...

Thomas L. Bell

1986-08-01T23:59:59.000Z

194

Learning and transferring geographically weighted regression trees across time  

Science Conference Proceedings (OSTI)

The Geographically Weighted Regression (GWR) is a method of spatial statistical analysis which allows the exploration of geographical differences in the linear effect of one or more predictor variables upon a response variable. The parameters of this ...

Annalisa Appice; Michelangelo Ceci; Donato Malerba; Antonietta Lanza

2011-10-01T23:59:59.000Z

195

Large weight does not yield an irreducible base  

E-Print Network (OSTI)

Answering a question of Juhasz, Soukup and Szentmikl\\'ossy we show that it is consistent that some first countable space of uncountable weight does not contain an uncountable subspace which has an irreducible base.

Shelah, Saharon

2010-01-01T23:59:59.000Z

196

STATE OF CALIFORNIA AREA WEIGHTED AVERAGE CALCULATION WORKSHEET: RESIDENTIAL  

E-Print Network (OSTI)

there is more than one level of floor, wall, or ceiling insulation in a building, or more than one type of a building feature, material, or construction assembly occur in a building, a weighted average

197

Weighted order statistic classifiers with large rank-order margin.  

Science Conference Proceedings (OSTI)

We describe how Stack Filters and Weighted Order Statistic function classes can be used for classification problems. This leads to a new design criteria for linear classifiers when inputs are binary-valued and weights are positive . We present a rank-based measure of margin that can be directly optimized as a standard linear program and investigate its effect on generalization error with experiment. Our approach can robustly combine large numbers of base hypothesis and easily implement known priors through regularization.

Porter, R. B. (Reid B.); Hush, D. R. (Donald R.); Theiler, J. P. (James P.); Gokhale, M. (Maya)

2003-01-01T23:59:59.000Z

198

The Complexity of Weighted Boolean #CSP with Mixed Signs  

E-Print Network (OSTI)

We give a complexity dichotomy for the problem of computing the partition function of a weighted Boolean constraint satisfaction problem. Such a problem is parameterized by a set ? of rational functions, each of which assigns a weight to each variable assignment. Our dichotomy extends previous work in which the weight functions were restricted to being non-negative. We represent a weight function as a product of the form (?1) s g, where the polynomial s determines the sign of the weight and the non-negative function g determines its magnitude. We show that the problem of computing the partition function (the sum of the weights of all possible variable assignments) is computable in polynomial time if either every function in ? can be defined by a pure affine magnitude with a quadratic sign polynomial or every function can be defined by a magnitude of product type with a linear sign polynomial. In all other cases, computing the partition function is FP #P-complete.

Andrei Bulatov; Martin Dyer; Leslie Ann Goldberg; Markus Jalsenius; David Richerby

2009-01-01T23:59:59.000Z

199

Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight  

NLE Websites -- All DOE Office Websites (Extended Search)

1: May 3, 2010 1: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight to someone by E-mail Share Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on Facebook Tweet about Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on Twitter Bookmark Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on Google Bookmark Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on Delicious Rank Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on Digg Find More places to share Vehicle Technologies Office: Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight on AddThis.com...

200

electric rates | OpenEI  

Open Energy Info (EERE)

electric rates electric rates Dataset Summary Description This dataset, compiled by NREL and Ventyx, provides average residential, commercial and industrial electricity rates by zip code for both investor owned utilities (IOU) and non-investor owned utilities. Note: the file includes average rates for each utility, but not the detailed rate structure data found in the database available via the zip-code look-up feature on the OpenEI Utilities page (http://en.openei.org/wiki/Gateway:Utilities). The data was released by NREL/Ventyx in February 2011. Source NREL and Ventyx Date Released February 24th, 2012 (2 years ago) Date Updated Unknown Keywords electric rates rates US utilities Data text/csv icon IOU rates by zipcode (csv, 1.7 MiB) text/csv icon Non-IOU rates by zipcode (csv, 2.1 MiB)

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Rate Schedules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rate Schedules Rate Schedules Rate Schedules One of the major responsibilities of Southeastern is to design, formulate, and justify rate schedules. Repayment studies prepared by the agency determine revenue requirements and appropriate rate levels and these studies for each of Southeastern's four power marketing systems are updated annually. They demonstrate the adequacy of the rates for each system. Rates are considered to be adequate when revenues are sufficient to repay all costs associated with power production and transmission costs, which include the amortization of the Federal investment allocated to power. Latest Rate Schedules October 1, 2012 ALA-1-N Wholesale Power Rate Schedule Area: PowerSouth Energy Cooperative System: Georgia-Alabama-South Carolina October 1, 2012

202

Effective Exchange Rates in Japan, 1879-1938  

E-Print Network (OSTI)

Donald, 1991), for this period only trade weights are feasible, given the extremely limited availability of output data for most of Japans trading partners during this period. For the period 1879-1913 the nominal effective exchange rate (EER) is calculated... 18 93 18 95 18 97 18 99 19 01 19 03 19 05 19 07 19 09 19 11 19 13 19 15 19 17 19 19 19 21 19 23 19 25 19 27 19 29 19 31 19 33 19 35 19 37 Nominal EER movements follow a stochastic trend,5 wi h the rate depreciating by 17 per cent over the period 1879...

Shimazaki, Masao; Solomou, Solomos

2004-06-16T23:59:59.000Z

203

National Utility Rate Database: Preprint  

DOE Green Energy (OSTI)

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

204

Multichannel Sampling of Pulse Streams at the Rate of Innovation  

E-Print Network (OSTI)

We consider minimal-rate sampling schemes for streams of delayed and weighted versions of a known pulse shape. Such signals belong to the class of finite rate of innovation (FRI) models. The minimal sampling rate for these parametric signals, is the number of degrees of freedom per unit of time, referred to as the rate of innovation. Although sampling of pulse streams was treated in previous works, either the rate of innovation was not achieved, or the pulse shape was limited to diracs and the method was instable for high rates of innovation. In this work we propose a multichannel framework for pulse streams with arbitrary shape, operating at the rate of innovation. Our approach is based on modulating the input signal with a set of properly chosen waveforms, followed by a bank of integrators. We show that the pulse stream can be recovered from the proposed minimal-rate samples using standard tools taken from spectral estimation in a stable way even at high rates of innovation. In addition, we address practica...

Gedalyahu, Kfir; Eldar, Yonina C

2010-01-01T23:59:59.000Z

205

Weighted-SNR-based fair scheduling for uplink OFDMA  

Science Conference Proceedings (OSTI)

In this paper, we study the sum rate maximization algorithms with long-term proportional rate fairness (PRF) for uplink orthogonal frequency division multiple access (OFDMA) systems. In contrast to the rate-maximization schemes which used short-term ... Keywords: OFDMA, multiuser diversity, proportional rate fairness (PRF), throughput maximization, water-filling power allocation

Yao Ma; Alex Leith; Mohamed-Slim Alouini; Xuemin Shen

2009-11-01T23:59:59.000Z

206

Operational dose rate visualization techniques  

SciTech Connect

The analysis of the gamma ray dose rate in the vicinity of a radiation source can be greatly aided by the use of recent state-of-the-art visualization techniques. The method involves calculating dose rates at thousands of locations within a complex geometry system. This information is then processed to create contour plots of the dose rate. Additionally, when these contour plots are created, animations can be created that dynamically display the dose rate as the shields or sources are moved.

Schwarz, R.A.; Morford, R.J.; Carter, L.L.; Jones, G.B.; Greenborg, J.

1994-01-01T23:59:59.000Z

207

DOE Guidance-Category Rating  

Energy.gov (U.S. Department of Energy (DOE))

This memorandum is to establish the Department of Energy's (DOE's) policy for the use of Category Rating.

208

ARCS Access Rate Control System  

protected steel housing. ... Access Rate Control System This rugged, maintenance- ... Y-12 is seeking an industry partner to fully com-

209

Modeling uncertain variables of the weighted average operation by fuzzy vectors  

Science Conference Proceedings (OSTI)

The paper deals with the fuzzy extension of the weighted average operation. First, we study the convenient ways how uncertain weights and weighted values can be modeled by fuzzy vectors. We show that, in comparison to a tuple of fuzzy numbers that have ... Keywords: Fuzzy probabilities, Fuzzy vector, Fuzzy weighted average, Multiple criteria decision making, Normalized fuzzy weights, Separability of fuzzy vectors

Ond?Ej Pavla?Ka

2011-11-01T23:59:59.000Z

210

DOE to ease weighting of fuels in BEPS plan  

SciTech Connect

The portion of DOE's proposed Building Efficiency Performance Standards (BEPS) which deals with fuel-weighting factors may be eased to consider regional rather than national fuel prices and fuel mixes as a result of criticism expressed at hearings. Critics of the BEPS plan object to the penalties on regions where fossil fuels are used to generate electricity. They question the concept of using weighting factors to influence the mix of fuels used in new buildings. Speakers at the BEPS hearing claimed it will burden the hotel industry by eliminating construction of moderately priced facilities, criticized the statistical base used for the standards, suggested the weighting factors may be counterproductive to national goals, and expressed concern that the complex rules will be difficult to implement. (DCK)

Murnane, T.

1980-04-28T23:59:59.000Z

211

The eect of fast food restaurants on obesity and weight gain  

E-Print Network (OSTI)

We investigate how changes in the supply of fast food restaurants affect weight outcomes of 3 million children and 3 million pregnant women. Among ninth graders, a fast food restaurant within 0.1 miles of a school results in a 5.2 percent increase in obesity rates. Among pregnant women, a fast-food restaurant within 0.5 miles of residence results in a 1.6 percent increase in the probability of gaining over 20 kilos. The implied effects on caloric intake are one order of magnitude larger for children than for mothers, consistent with smaller travel cost for adults. Non-fast food restaurants and future fast-food restaurants are uncorrelated with weight outcomes. (JEL I12, J13, J16, L83) In the public debate over obesity it is often assumed the widespread availability of fast food restaurants is an important determinant of obesity rates. Policy makers in several cities have responded by restricting the availability or content of fast food, or by requiring posting of the caloric content of the meals (Julie Samia Mair, Matthew

Janet Currie; Stefano Dellavigna; Enrico Moretti; Vikram Pathania

2010-01-01T23:59:59.000Z

212

Weight-related Beliefs, Behaviors, and Social Networks of Obese, Young Adult African- American Women: Implications for Healthy Weight Interventions  

E-Print Network (OSTI)

Obesity is a public health concern that affects over 30% of Americans. Approximately 78% of African-American women are overweight/obese, as compared to 46% of Caucasian women. Obese African-American women are at higher risk for associated morbidities (e.g., hypertension, type II diabetes, select cancers, and early mortality) as compared to non-Hispanic whites. Weight gain after young adulthood (ages 20-35) is associated with an increased risk of cardiovascular disease and other health problems later in life. Research that seeks to explain, predict, or control obesity among African-American women has focused on individual behavior change. Few studies have addressed the social contexts within which these behaviors occur. The purpose of this exploratory study was to examine the weight-related beliefs, behaviors, and social network characteristics of obese, young adult African-American women. A conceptual framework based on social support and social network theory guided the design of the study. Ten African-American women between the ages of 20 and 35, self-described as plus-size or full-figured, completed initial informal conversations about weight-related issues and concerns and semi-structured, in-depth face-to-face interviews. Five participants were randomly selected to complete social network profiles to identify potential social influences on weight-related beliefs and behaviors. Results of the initial conversations revealed approximately half of the participants were class III obesity (BMI > 40), reported overall good health, and 70% participated in physical activity at least one day a week. Semi-structured interviews results disclosed two primary reasons for unsuccessful long-term weight loss: (a) inconsistent weight loss behaviors and (b) lack of accountability. Weight-related beliefs and behaviors of study participants were similar to those reported for older adult African-American women. Similarities included (a) mixed levels of body satisfaction; (b) the belief that health is not determined by weight; (c) sedentary lifestyles and; (d) social support from family and friends impacts long-term weight loss success. The five social network profiles indicated participants networks are small, comprised of at least two overweight/obese females, and exhibited positive social support behaviors. Social networks included positive, negative, and non-positive relationships. Social support for weight loss is shared among network members through face-to-face interactions, phone conversations, and use of social media tools such as Facebook, Twitter, and text messaging. Future healthy weight studies would benefit from comprehensive analyses of the social networks of obese, young adult African-American women, inclusive of interviews with social network members. Culture-based healthier weight interventions that organize social support networks through social media tools are promising strategies for promoting healthy weight management among obese, young adult African-American women.

Rollins, Brandy 1982-

2012-12-01T23:59:59.000Z

213

STATUS OF RADIOACTIVE ELEMENTS IN THE ATOMIC WEIGHTS TABLE.  

SciTech Connect

During discussions within the Inorganic Chemistry Division Committee, that dealt with the Periodic Table of the Chemical Elements and the official IUPAC position on its presentation, the following question was raised. When the various chemical elements are presented, each with their appropriate atomic weight value, how should the radioactive elements be presented? The Atomic Weights Commission has treated this question in a number of different ways during the past century, almost in a random manner. This report reviews the position that the Commission has taken as a function of time, as a prelude to a discussion in Ottawa about how the Commission should resolve this question for the future.

HOLDEN,N.E.

2003-08-08T23:59:59.000Z

214

Asymptotic Cellular Growth Rate as the Effective Information Utilization Rate  

E-Print Network (OSTI)

We study the average asymptotic growth rate of cells in randomly fluctuating environments. Using a game-theoretic perspective, we show that any response strategy has an asymptotic growth rate, which is the sum of: (i) the maximal growth rate at the worst possible distribution of environments, (ii) relative information between the actual distribution of environments to the worst one, and (iii) information utilization rate which is the information rate of the sensory devices minus the "information dissipation rate", the amount of information not utilized by the cell for growth. In non-stationary environments, the optimal strategy is the time average of the instantaneous optimal strategy and the optimal switching times are evenly spaced in the statistical (Fisher) metric.

Pugatch, Rami; Tlusty, Tsvi

2013-01-01T23:59:59.000Z

215

Effect of Weight and Roadway Grade on the Fuel Economy of Class-8 Frieght Trucks  

DOE Green Energy (OSTI)

In 2006-08, the Oak Ridge National Laboratory, in collaboration with several industry partners, collected real-world performance and situational data for long-haul operations of Class-8 trucks from a fleet engaged in normal freight operations. Such data and information are useful to support Class-8 modeling of combination truck performance, technology evaluation efforts for energy efficiency, and to provide a means of accounting for real-world driving performance within combination truck research and analyses. The present study used the real-world information collected in that project to analyze the effects that vehicle speed and vehicle weight have on the fuel efficiency of Class-8 trucks. The analysis focused on two type of terrains, flat (roadway grades ranging from -1% to 1%) and mild uphill terrains (roadway grades ranging from 1% to 3%), which together covered more than 70% of the miles logged in the 2006-08 project (note: almost 2/3 of the distance traveled on mild uphill terrains was on terrains with 1% to 2% grades). In the flat-terrain case, the results of the study showed that for light and medium loads, fuel efficiency decreases considerably as speed increases. For medium-heavy and heavy loads (total vehicle weight larger than 65,000 lb), fuel efficiency tends to increase as the vehicle speed increases from 55 mph up to about 58-60 mph. For speeds higher than 60 mph, fuel efficiency decreases at an almost constant rate with increasing speed. At any given speed, fuel efficiency decreases and vehicle weight increases, although the relationship between fuel efficiency and vehicle weight is not linear, especially for vehicle weights above 65,000 lb. The analysis of the information collected while the vehicles were traveling on mild upslope terrains showed that the fuel efficiency of Class-8 trucks decreases abruptly with vehicle weight ranging from light loads up to medium-heavy loads. After that, increases in the vehicle weight only decrease fuel efficiency slightly. Fuel efficiency also decreases significantly with speed, but only for light and medium loads. For medium-heavy and heavy, FE is almost constant for speeds ranging from 57 to about 66 mph. For speeds higher than 66 mph, the FE decreases with speed, but at a lower rate than for light and medium loads. Statistical analyses that compared the fuel efficiencies obtained when the vehicles were traveling at 59 mph vs. those achieved when they were traveling at 65 mph or 70 mph indicated that the former were, on average, higher than the latter. This result was statistically significant at the 99.9% confidence level (note: the Type II error i.e., the probability of failing to reject the null hypothesis when the alternative hypothesis is true was 18% and 6%, respectively).

Franzese, Oscar [ORNL; Davidson, Diane [ORNL

2011-11-01T23:59:59.000Z

216

Comparison of weighted grey relational analysis for software effort estimation  

Science Conference Proceedings (OSTI)

In recent years, grey relational analysis (GRA), a similarity-based method, has been proposed and used in many applications. However, we found that most traditional GRA methods only consider nonweighted similarity for predicting software development ... Keywords: Grey relational analysis (GRA), Software cost, Software development effort, Software effort estimation, Weighted assignment

Chao-Jung Hsu; Chin-Yu Huang

2011-03-01T23:59:59.000Z

217

RADIOACTIVE ELEMENTS IN THE STANDARD ATOMIC WEIGHTS TABLE  

Science Conference Proceedings (OSTI)

In the 1949 Report of the Atomic Weights Commission, a series of new elements were added to the Atomic Weights Table. Since these elements had been produced in the laboratory and were not discovered in nature, the atomic weight value of these artificial products would depend upon the production method. Since atomic weight is a property of an element as it occurs in nature, it would be incorrect to assign an atomic weight value to that element. As a result of that discussion, the Commission decided to provide only the mass number of the most stable (or longest-lived) known isotope as the number to be associated with these entries in the Atomic Weights Table. As a function of time, the mass number associated with various elements has changed as longer-lived isotopes of a particular element has been found in nature, or as improved half-life values of an element's isotopes might cause a shift in the longest-lived isotope from one mass to another. In the 1957 Report of the Atomic Weights Commission, it was decided to discontinue the listing of the mass number in the Atomic Weights Table on the grounds that the kind of information supplied by the mass number is inconsistent with the primary purpose of the Table, i.e., to provide accurate values of 'these constants' for use in various chemical calculations. In addition to the Table of Atomic Weights, the Commission included an auxiliary Table of Radioactive Elements for the first time, where the entry would be the isotope of that element which was the most stable, i.e., the one with the longest known half-life. In their 1973 Report, the Commission noted that the users of the main Table of Atomic Weights were dissatisfied with the omission of values for some elements in that Table and it was decided to reintroduce the mass number for the radioactive elements into the main Table. In their 1983 Report, the Commission decided that radioactive elements were considered to lack a characteristic terrestrial isotopic composition, from which an atomic weight value could be calculated to five or more figure accuracy, without prior knowledge of the sample involved. These elements were again listed in the Atomic Weights Table with no further information, i.e., with no mass number or atomic weight value. For the elements, which have no stable characteristic terrestrial isotopic composition, the data on the half-lives and the relative atomic masses for the nuclides of interest for those elements have been evaluated. The values of the half-lives with their uncertainties are listed in the table. The uncertainties are given for the last digit quoted of the half-life and are given in parentheses. A half-life entry for the Table having a value and an uncertainty of 7 {+-} 3 is listed in the half-life column as 7 (3). The criteria to include data in this Table, is to be the same as it has been for over sixty years. It is the same criteria, which are used for all data that are evaluated for inclusion in the Standard Table of Atomic Weights. If a report of data is published in a peer-reviewed journal, that data is evaluated and considered for inclusion in the appropriate table of the biennial report of the Atomic Weights Commission. As better data becomes available in the future, the information that is contained in either of the Tables of Standard Atomic Weights or in the Table of Radioactive Elements may be modified. It should be noted that the appearance of any datum in the Table of the Radioactive Elements is merely for the purposes of calculating an atomic mass value for any sample of a radioactive material, which might have a variety of isotopic compositions and it has no implication as to the priority for claiming discovery of a given element and is not intended to. The atomic mass values have been taken primarily from the 2003 Atomic Mass Table. Mass values for those radioisotopes that do not appear in the 2003 Atomic mass Table have been taken from preliminary data of the Atomic Mass Data Center. Most of the quoted half-lives.

Holden, N.E.; Holden, N.; Holden,N.E.

2011-07-27T23:59:59.000Z

218

Integrating a differential evolution feature weighting scheme into prototype generation  

Science Conference Proceedings (OSTI)

Prototype generation techniques have arisen as very competitive methods for enhancing the nearest neighbor classifier through data reduction. Within the prototype generation methodology, the methods of adjusting the prototypes' positioning have shown ... Keywords: Classification, Differential evolution, Feature weighting, Nearest neighbor, Prototype generation, Prototype selection

Isaac Triguero; JoaquN Derrac; Salvador GarcA; Francisco Herrera

2012-11-01T23:59:59.000Z

219

Optimal Project Feature Weights in Analogy-Based Cost Estimation  

E-Print Network (OSTI)

Optimal Project Feature Weights in Analogy-Based Cost Estimation: Improvement and Limitations, IEEE Abstract--Cost estimation is a vital task in most important software project decisions as measured by standard metrics. Index Terms--Software cost estimation, analogy-based cost estimation, project

220

Forecast of Standard Atomic Weights for the Mononuclidic Elements 2011  

SciTech Connect

In this short report, I will provide an early warning about potential changes to the standard atomic weight values for the twenty mononuclidic and the so-called pseudo-mononuclidic ({sup 232}Th and {sup 231}Pa) chemical elements due to the estimated changes in the mass values to be published in the next Atomic Mass Tables within the next two years. There have been many new measurements of atomic masses, since the last published Atomic Mass Table. The Atomic Mass Data Center has released an unpublished version of the present status of the atomic mass values as a private communication. We can not update the Standard Atomic Weight Table at this time based on these unpublished values but we can anticipate how many changes are probably going to be expected in the next few years on the basis of the forthcoming publication of the Atomic Mass Table. I will briefly discuss the procedures that the Atomic Weights Commission used in deriving the recommended Standard Atomic Weight values and their uncertainties from the atomic mass values. I will also discuss some concern raised about a proposed change in the definition of the mole. The definition of the mole is now connected directly to the mass of a {sup 12}C isotope (which is defined as 12 exactly) and to the kilogram. A change in the definition of the mole will probably impact the mass of {sup 12}C.

Holden, N.E.; Holden, N.; Holden,N.E.

2011-07-27T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

inverters, offering less weight, higher efficiency, and lower-cost installations.  

E-Print Network (OSTI)

to 10 pounds per square foot of dead weight to the roof structural members, concentrated throughinverters, offering less weight, higher efficiency, and lower- cost installations. The electrical

Johnson, Eric E.

222

Production and Handling Slide 30: UF6 Cylinder Fill Limit Weights  

NLE Websites -- All DOE Office Websites (Extended Search)

Weights Skip Presentation Navigation First Slide Previous Slide Next Slide Last Presentation Table of Contents UF6 Cylinder Fill Limit Weights A minimum volume, stated in cubic...

223

Interference-Aware Fair Rate Control in Wireless Sensor Networks  

E-Print Network (OSTI)

In a wireless sensor network of N nodes transmitting data to a single base station, possibly over multiple hops, what distributed mechanisms should be implemented in order to dynamically allocate fair and efficient transmission rates to each node? Our interference-aware fair rate control (IFRC) detects incipient congestion at a node by monitoring the average queue length, communicates congestion state to exactly the set of potential interferers using a novel low-overhead congestion sharing mechanism, and converges to a fair and efficient rate using an AIMD control law. We evaluate IFRC extensively on a 40-node wireless sensor network testbed. IFRC achieves a fair and efficient rate allocation that is within 20- 40% of the optimal fair rate allocation on some network topologies. Its rate adaptation mechanism is highly effective: we did not observe a single instance of queue overflow in our many experiments. Finally, IFRC can be extended easily to support situations where only a subset of the nodes transmit, where the network has multiple base stations, or where nodes are assigned different transmission weights.In a wireless sensor network of N nodes transmitting data to a single base station, possibly over multiple hops, what distributed mechanisms should be implemented in order to dynamically allocate fair and efficient transmission rates to each node? Our interference-aware fair rate control (IFRC) detects incipient congestion at a node by monitoring the average queue length, communicates congestion state to exactly the set of potential interferers using a novel low-overhead congestion sharing mechanism, and converges to a fair and efficient rate using an AIMD control law. We evaluate IFRC extensively on a 40-node wireless sensor network testbed. IFRC achieves a fair and efficient rate allocation that is within 20- 40% of the optimal fair rate allocation on some network topologies. Its rate adaptation mechanism is highly effective: we did not observe a single instance of queue overflow in our many experiments. Finally, IFRC can be extended easily to support situations where only a subset of the nodes transmit, where the network has multiple base stations, or where nodes are assigned different transmission weights.

Sumit Rangwala; Ramakrishna Gummadi; Ramesh Govindan; Konstantinos Psounis

2006-01-01T23:59:59.000Z

224

VEHICLE SPECIFICATIONS Vehicle Features  

NLE Websites -- All DOE Office Websites (Extended Search)

Mazda 3 Mazda 3 VIN: JMZBLA4G601111865 Seatbelt Positions: 5 Standard Features: Air Conditioning Power Locks Power Steering Power Brakes Power Windows Cruise Control Front Disc Brakes Rear Disc Brakes Front Wheel Drive Anti-Lock Brakes Traction Control Air Bags AM/FM Stereo with CD Weights Design Curb Weight: 2,954 lb Delivered Curb Weight: 2,850 lb Distribution F/R (%): 63/37 GVWR: 4,050 lb GAWR F/R: 2,057/1,896 lb Payload 1 : 1,096 lb Performance Goal: 400 lb Dimensions Wheelbase: 103.9 in Track F/R: 60.4/59.8 in Length: 175.6 in Width: 69.1 in Height: 57.9 in Ground Clearance: 6.1 in Performance Goal: 5.0 in Tires Manufacturer: Yokohama Model: YK520 Size: P205/55R17 Pressure F/R: 35/33 psi

225

VEHICLE SPECIFICATIONS Vehicle Features Base Vehicle: 2010 Honda  

NLE Websites -- All DOE Office Websites (Extended Search)

Honda Honda Civic Hybrid VIN: JHMFA3F24AS005577 Seatbelt Positions: 5 Standard Features: Air Conditioning Power Locks Power Steering Power Brakes Power Windows Cruise Control Front Disc Brakes Rear Disc Brakes Front Wheel Drive Regenerative Braking Anti-Lock Brakes Traction Control Air Bags AM/FM Stereo with CD State of Charge Meter 1 Weights Design Curb Weight: 2877 lb Delivered Curb Weight: 2982 lb Distribution F/R (%): 57/43 GVWR: 3792 lb GAWR F/R: 1973/1841 lb Payload 2 : 810 lb Performance Goal: 400 lb Dimensions Wheelbase: 106.3 in Track F/R: 59.1/60.2 in Length: 177.3 in Width: 69.0 in Height: 56.3 in Ground Clearance: 6.0 in Performance Goal: 5.0 in Tires Manufacturer: Bridgestone

226

VEHICLE SPECIFICATIONS Vehicle Features Base Vehicle: 2010 Smart  

NLE Websites -- All DOE Office Websites (Extended Search)

Smart Smart Fortwo MHD VIN: WME4513341K406476 Seatbelt Positions: 2 Standard Features: Air Conditioning Power Locks Power Steering Power Brakes Power Windows Cruise Control Front Disc Brakes Rear Drum Brakes Rear Wheel Drive Anti-Lock Brakes Traction Control Air Bags AM/FM Stereo with CD player Weights Design Curb Weight:1,818 lb Delivered Curb Weight: 1.742 lb Distribution F/R (%):44/56 GVWR: 2,244 lb GAWR F/R: 968/1,452 lb Payload 1 : 426 lb Performance Goal: 400 lb Dimensions Wheelbase: 73.5 in Track F/R: 50.5/54.5 in Length: 106.1 in Width: 61.4 in Height: 60.7 in Ground Clearance: 6.25 in Performance Goal: 5.0 in Tires Manufacturer: Continental Model: ContiproContact Size: Front -P155/60/R15

227

2011 Heat Rate Improvement Conference  

Science Conference Proceedings (OSTI)

With the rising cost of fuel and the strong possibility of CO2 emissions regulations and limitations in the near future, utilities and power generation companies are focusing on power plant heat rate and performance. The Electric Power Research Institute (EPRI) 17th Heat Rate Improvement Conference is the latest in a series of meetings designed to assist attendees in addressing problems with power plant performance and in identifying cost-effective solutions for achieving and sustaining heat rate improve...

2011-03-28T23:59:59.000Z

228

Search Results for 'Credit Rating'  

U.S. Energy Information Administration (EIA)

The rating agency says it expects the banks asset quality to remain weak over the next 12-18 months

229

Exchange rate determination in Indonesia.  

E-Print Network (OSTI)

??This thesis examines the options for adopting normative and prescriptive models of exchange rate determination suitable for developed and developing countries. It also develops a (more)

Rusydi, Mohammad

2006-01-01T23:59:59.000Z

230

Definition: Rating | Open Energy Information  

Open Energy Info (EERE)

power, such as transformers, or transport it from one location to another, such as transmission lines, the power rating almost always refers to the maximum power flow...

231

Sustainable Building Rating Systems Summary  

SciTech Connect

The purpose of this document is to offer information that could be used to compare and contrast sustainable building rating systems.

Fowler, Kimberly M.; Rauch, Emily M.

2006-07-01T23:59:59.000Z

232

June 1 Government Rate $137  

NLE Websites -- All DOE Office Websites (Extended Search)

& Fitness Center The Jewelry Box & Gift Shoppe 24 Hour Front Desk Service, Sundry Shop, ATM Wireless Internet Always Complimentary 112 per night room rate effective thru April...

233

Server efficiency rating tool (SERT)  

Science Conference Proceedings (OSTI)

The Server Efficiency Rating Tool (SERT) [1] has been developed by Standard Performance Evaluation Corporation (SPEC) [2] at the request of the US Environmental Protection Agency (EPA) [3], prompted by concerns that US datacenters consumed almost 3% ... Keywords: benchmark, datacenter, energy efficiency, energy star, environmental protection agency, epa, power, rating tool, sert, server, spec

Klaus-Dieter Lange; Mike G. Tricker; Jeremy A. Arnold; Hansfried Block; Sanjay Sharma

2012-04-01T23:59:59.000Z

234

Commercial Building Asset Rating Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 eere.energy.gov 1 eere.energy.gov Commercial Building Asset Rating Program August 23, 2011 12 p.m. ET, 9 a.m. PT Presenter: Cody Taylor PRE-DECISIONAL Information included in this document is for discussion purposes and does not constitute the final program design. FOR INFORMATION ONLY 2 eere.energy.gov Outline * Goals * Scope & schedule * Guiding principles * Program design issues - Metrics - Rating method - Rating scale - Opportunities for efficiency improvement - Quality assurance Please submit clarifying questions during today's webinar via the Q&A function of Live Meeting. 3 eere.energy.gov National Building Rating Program Goals * Facilitate cost-effective investment in energy efficiency and reduce energy use in the commercial building sector * Establish a national standard for voluntary commercial building asset rating

235

FORCE RECONSTRUCTION USING THE SUM OF WEIGHTED ACCELERATIONS  

Office of Scientific and Technical Information (OSTI)

i i FORCE RECONSTRUCTION USING THE SUM OF WEIGHTED ACCELERATIONS TECHNIQUE - _-FUkT PRt_EOURE Thomas G. Came, Randy L. Mayas and Vesta I. Bateman .... _ i_ _ :!_ Sandia NationalLaboratories _. .... Albuquerque, NewMexico87185, USA ' _ i_ _ / ABSTRACT important design consideration. This would include payloador satelliteloads duringrocket launches[3]. Force reconstruction is a procedure in which the externally applied force is inferred from measured An applicationthat will be discussed as part of this structuralresponse ratherthan directlymeasured. In paper is the impact into a rigid barrier of a weapon a recently developed technique, the response system with an energy-absorbing nose. The nose acceleration time-histories are multiplied by scalar had been designed to absorb the energy of impact weights and summed to produce the reconstructed and to mitigate the shock to the

236

Learning Feature Weights from Customer Return-Set Selections  

E-Print Network (OSTI)

This paper describes LCW, a procedure for learning customer preferences represented as feature weights by observing customers' selections from return sets. An empirical evaluation on simulated customer behavior indicated that uninformed hypotheses about customer weights lead to low ranking accuracy unless customers place some importance on almost all features or the total number of features is quite small. In contrast, LCW's estimate of the mean preferences of a customer population improved as the number of customers increased, even for larger numbers of features of widely differing importance. This improvement in the estimate of mean customer preferences led to improved prediction of individual customer's rankings, irrespective of the extent of variation among customers and whether a single or multiple retrievals were permitted. The experimental results suggest that the return set that optimizes benefit may be smaller for customer populations with little variation than for customer populations with wide variation.

L. Karl Branting

2004-01-01T23:59:59.000Z

237

PET imaging predicts future body weight and cocaine preference  

Science Conference Proceedings (OSTI)

Deficits in dopamine D2/D3 receptor (D2R/D3R) binding availability using PET imaging have been reported in obese humans and rodents. Similar deficits have been reported in cocaine-addicts and cocaine-exposed primates. We found that D2R/D3R binding availability negatively correlated with measures of body weight at the time of scan (ventral striatum), at 1 (ventral striatum) and 2 months (dorsal and ventral striatum) post scan in rats. Cocaine preference was negatively correlated with D2R/D3R binding availability 2 months (ventral striatum) post scan. Our findings suggest that inherent deficits in striatal D2R/D3R signaling are related to obesity and drug addiction susceptibility and that ventral and dorsal striatum serve dissociable roles in maintaining weight gain and cocaine preference. Measuring D2R/D3R binding availability provides a way for assessing susceptibility to weight gain and cocaine abuse in rodents and given the translational nature of PET imaging, potentially primates and humans.

Michaelides M.; Wang G.; Michaelides M.; Thanos P.K. Kim R.; Cho J.; Ananth M.; Wang G.-J.; Volkow N.D.

2011-08-28T23:59:59.000Z

238

A population-based variable neighborhood search for the single machine total weighted tardiness problem  

Science Conference Proceedings (OSTI)

This paper investigates the single machine total weighted tardiness problem, in which a set of independent jobs with distinct processing times, weights, and due dates are to be scheduled on a single machine to minimize the sum of weighted tardiness of ... Keywords: Single machine scheduling, Total weighted tardiness, Variable neighborhood search

Xianpeng Wang; Lixin Tang

2009-06-01T23:59:59.000Z

239

Supernova rates and stellar populations  

E-Print Network (OSTI)

We discuss the results about the nature of type Ia Supernovae that can be derived by studying their rates in different stellar populations. While the evolution of SN photometry and spectra can constrain the explosion mechanism, the SN rate depends on the progenitor system. We review the current available data on rates as a function of parent galaxy color, morphology, star formation rate, radio luminosity and environment. By studying the variation of the rates with the color of the parent galaxy, a strong evidence was established that type Ia SNe come from both young and old stars. The dependence of the rates with the radio power of the parent galaxy is best reproduced by a bimodal distribution of delay time between the formation of the progenitor and its explosion as a SN. Cluster early-type galaxies show higher type Ia SN rate with respect to field galaxies, and this effect can be due either to traces of young stars or to differences in the delay time distribution.

F. Mannucci

2007-08-03T23:59:59.000Z

240

PBXN-9 Ignition Kinetics and Deflagration Rates  

SciTech Connect

The ignition kinetics and deflagration rates of PBXN-9 were measured using specially designed instruments at LLNL and compared with previous work on similar HMX based materials. Ignition kinetics were measured based on the One Dimensional Time-to-Explosion combined with ALE3D modeling. Results of these experiments indicate that PBXN-9 behaves much like other HMX based materials (i.e. LX-04, LX-07, LX-10 and PBX-9501) and the dominant factor in these experiments is the type of explosive, not the type of binder/plasticizer. In contrast, the deflagration behavior of PBXN-9 is quite different from similar high weight percent HMX based materials (i.e LX-10, LX-07 and PBX-9501). PBXN-9 burns in a laminar manner over the full pressure range studied (0-310 MPa) unlike LX-10, LX-07, and PBX-9501. The difference in deflagration behavior is attributed to the nature of the binder/plasticizer alone or in conjunction with the volume of binder present in PBXN-9.

Glascoe, E; Maienschein, J; Burnham, A; Koerner, J; Hsu, P; Wemhoff, A

2008-04-24T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Packer weighted and pressure differential method and apparatus for big hole drilling  

Science Conference Proceedings (OSTI)

A packer and pressure differential drilling tool and method of controlled pressure balanced drilling in Big Hole well bores and shafts, characterized by a large diameter packer slideably engaged with the well bore over a drill bit and through which a dual drill pipe operates and isolates drilling fluid from a hydrostatic head of fluid standing in the well bore surrounding the dual drill pipe, the packer functioning as a non-rotatable ram slideable down the well bore and supporting said hydrostatic head and applying the weight thereof to the drill bit through anti-friction bearings, cuttings being flushed through the dual drill pipe by means of aerated drilling fluid or by an upwardly disposed jet pump, or both, so as to establish a reduced and/or underbalanced condition at the bit-to-bore bottom interface and operating the drill bit at an increased rate of penetration while maintaining a higher pressure condition in the well bore above the packer, the packer being weight set or hydraulic set, and the jet pump being centered in the dual drill pipe or disposed in the annulus of the dual drill pipe.

Hooper, D. W.

1985-08-13T23:59:59.000Z

242

OpenEI - electric rates  

Open Energy Info (EERE)

U.S. Electric Utility U.S. Electric Utility Companies and Rates: Look-up by Zipcode (Feb 2011) http://en.openei.org/datasets/node/899 This dataset, compiled by NREL and Ventyx, provides average residential, commercial and industrial electricity rates by zip code for both investor owned utilities (IOU) and non-investor owned utilities. Note: the file includes average rates for each utility, but not the detailed rate structure data found in the database available via the zip-code look-up feature on the OpenEI Utilities page (http://en.openei.org/wiki/Gateway:Utilities). The data was released by NREL/Ventyx in February 2011.

243

DOE Guidance-Category Rating  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2010 2010 MEMORANDUM FOR HUMAN RESOURCES DIRECTORS FROM: SARA"iJ. Boku1, DIRECToR OF HUMAN C~TAL MANAGEMENT SUBJECT: GUIDANCE MEMORANDUM #10 CATEGORY RATING The purpose of this memorandum is to establish the Department of Energy's (DOE's) policy for the use of Category Rating. Authorities: Public Law 107-296; Title 5 USC 3319; 5 CFR, Part 337, Subpart C., Presidential Memorandum of May 11, 2010 This guidance is established in accordance with 5 USC 3319, which authorizes Federal Agencies to use alternative rating proced.ures in assessing applicants for employment using category rating and selection procedures, and to ensure consistency in complying with federal regulations contained in the Code of Federal Regulations (CFR), Office of Personnel Management (OPM) and the Department of

244

ARM - Measurement - Radiative heating rate  

NLE Websites -- All DOE Office Websites (Extended Search)

govMeasurementsRadiative heating rate govMeasurementsRadiative heating rate ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Radiative heating rate The heating rate due to the divergence of long and shortwave radiative flux. Categories Radiometric, Atmospheric State Instruments The above measurement is considered scientifically relevant for the following instruments. Refer to the datastream (netcdf) file headers of each instrument for a list of all available measurements, including those recorded for diagnostic or quality assurance purposes. External Instruments MOLTS : Model Output Location Time Series Datastreams MOLTS : Model Output Location Time Series Datastreams MOLTSEDASSNDCLASS1 : Model Output Loc. Time Ser. (MOLTS): EDAS

245

Heat Rate Improvement Reference Manual  

Science Conference Proceedings (OSTI)

Performance optimization of fossil power plants is a high priority within the electric utilities in the new competitive environment. This manual can help utility engineers establish a heat rate improvement program.

1998-07-27T23:59:59.000Z

246

Project Definition Rating Index (PDRI)  

Energy.gov (U.S. Department of Energy (DOE))

The Office of Environmental Management (EM) Project Definition Rating Index (EM-PDRI) is a modification of a commercially developed planning tool that has been tested by an EM team specifically for...

247

High compression rate text summarization  

E-Print Network (OSTI)

This thesis focuses on methods for condensing large documents into highly concise summaries, achieving compression rates on par with human writers. While the need for such summaries in the current age of information overload ...

Branavan, Satchuthananthavale Rasiah Kuhan

2008-01-01T23:59:59.000Z

248

Exchange Rates, Information, and Crises  

E-Print Network (OSTI)

equation (5.4). Standard Bayesian inference implies that theAs before, standard Bayesian inference implies that Var 1 [f so that standard Bayesian inference both exchange rate is

Fernholz, Ricardo Turrin

2011-01-01T23:59:59.000Z

249

THE EFFECT OF A MINIMUM WEIGHT RADIAL REFLECTOR ON SNAP SHIELDING REQUIREMENTS  

SciTech Connect

A model was derived for a minimum-weight radial reflector for SNAP reactors. The effect, which the use of this optimal reflector has on radiation shield weight requirements is investigated. Weights of systems employing conventional and optimal radial reflectors are compared using the FARSE and FARSER computer codes. It is found that for the configuration under study additional shield weight required when the optimal reflector is used is in excess of the reflector weight savings. (auth)

Bernick, R.L.

1963-10-17T23:59:59.000Z

250

Method for fabricating light weight carbon-bonded carbon fiber composites  

DOE Patents (OSTI)

Ultralight carbon-bonded carbon fiber composites of densities in the range of about 0.04 to 0.10 grams per cubic centimeter are fabricated by forming an aqueous slurry of carbonaceous fibers which include carbonized fibers and 0-50 weight percent fugitive fibers and a particulate thermosetting resin precursor. The slurry is brought into contact with a perforated mandrel and the water is drained from the slurry through the perforations at a controlled flow rate of about 0.03 to 0.30 liters per minutes per square inch of mandrel surface. The deposited billet of fibers and resin precursor is heated to cure the resin precursor to bind the fibers together, removed from the mandrel, and then the resin and fugitive fibers, if any, are carbonized.

Wrenn, Jr., George E. (Clinton, TN); Abbatiello, Leonard A. (Oak Ridge, TN); Lewis, Jr., John (Oak Ridge, TN)

1989-01-01T23:59:59.000Z

251

Method for fabricating light weight carbon-bonded carbon fiber composites  

DOE Patents (OSTI)

The invention is directed to the fabrication of ultralight carbon- bonded carbon fiber composites of densities in the range of about 0. 04 to 0.10 grams per cubic centimeter. The composites are fabricated by forming an aqueous slurry of carbonaceous fibers which include carbonized fibers and 0-50 weight percent fugitive fibers and a particulate thermosetting resin precursor. The slurry is brought into contact with a perforated mandrel and the water is drained from the slurry through the perforations at a controlled flow rate of about 0. 03 to 0.30 liters per minutes per square inch of a mandrel surface. The deposited billet of fibers and resin precursor is heated to cure the resin precursor to bind the fibers together, removed from the mandrel, and then the resin and fugitive fibers, if any, are carbonized.

Wrenn, G.E. Jr.; Abbatiello, L.A.; Lewis, J. Jr.

1987-06-17T23:59:59.000Z

252

A Successful Cool Storage Rate  

E-Print Network (OSTI)

Houston Lighting & Power (HL&P) initiated design and development of its commercial cool storage program as part of an integrated resource planning process with a targeted 225 MW of demand reduction through DSM. Houston's extensive commercial air conditioning load, which is highly coincident with HL&P's system peak, provided a large market for cool storage technologies. Initial market research made it very clear that a special cool storage rate was required to successfully market the technology. Development of the rate required an integrated, multidepartment effort and extensive use of DSManager, an integrated resource planning model. An experimental version of the rate was initially implemented as part of the initial phase of the cool storage program. A permanent rate, incorporating lessons learned from the experimental rate, was then developed for the long term implementation of the program. The permanent rate went through a lengthy regulatory approval process which included intervention by a local natural gas distribution company. The end result is a very successful cool storage program with 52 projects and 31 megawatts of demand reduction in the first three and one-half years of program implementation.

Ahrens, A. C.; Sobey, T. M.

1994-01-01T23:59:59.000Z

253

Multifoil insulation study for weight reduction. Technical information report  

DOE Green Energy (OSTI)

The purpose of the present task is to develop high temperature multi-foil insulation suitable for use in the SP-100 thermoelectric converter project. Part of this task involves careful examination of alternative foil and foil spacing materials with the goal of effecting significant weight savings over current state-of-the-art foil insulation. This task involved the determination of the state-of-the-art foils, ascertaining what data is available, what additional data is required, preliminary assessment of the suitability of alternate foil and spacer materials, and specific recommendations for additional tests required to qualify new and existing insulation designs for use in the SP-100.

Glazer, S.D.

1984-01-01T23:59:59.000Z

254

Step Complexity Measure for Emergency Operating Procedures - Determining Weighting Factors  

Science Conference Proceedings (OSTI)

In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human error has been regarded as the primary cause of many events. Therefore, to ensure system safety, extensive effort has been made to identify the significant factors that can cause human error. According to related studies, written manuals or operating procedures are revealed as one of the important factors, and the understandability is pointed out as one of the major reasons for procedure-related human errors.Many qualitative checklists have been suggested to evaluate emergency operating procedures (EOPs) of NPPs so as to minimize procedure-related human errors. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is indispensable.From this necessity, Park et al. suggested the step complexity (SC) measure to quantify the complexity of procedural steps included in EOPs. To verify the appropriateness of the SC measure, averaged step performance time data obtained from emergency training records of the loss-of-coolant accident (LOCA) and the excess steam demand event were compared with estimated SC scores. However, although averaged step performance time data and estimated SC scores show meaningful correlation, some important issues such as determining proper weighting factors have to be clarified to ensure the appropriateness of the SC measure. These were not properly dealt with due to a lack of backup data.In this paper, to resolve one of the important issues, emergency training records are additionally collected and analyzed in order to determine proper weighting factors. The total number of collected records is 66, and the training scenarios cover five emergency conditions including the LOCA, the steam generator tube rupture, the loss of all feedwater, the loss of off-site power, and the station blackout. From these records, average step performance time data are retrieved, and new weighting factors are determined by using a nonlinear regression analysis. The results show that the SC scores quantified by the new weighting factors show statistically meaningful correlation with averaged step performance time data. Thus, it can be concluded that the SC measure can represent the complexity of procedural steps included in EOPs.

Park, Jinkyun; Jung, Wondea; Kim, Jaewhan; Ha, Jaejoo [Korea Atomic Energy Research Institute (Korea, Republic of)

2003-09-15T23:59:59.000Z

255

Standard Rates, Budget Office, Brookhaven National Laboratory...  

NLE Websites -- All DOE Office Websites (Extended Search)

Standard Rates Standard Rates for Brookhaven National Laboratory is available in PDF file formats. This file contains rates for Distributed Technical Services, Scientific Devices...

256

Research Article Association of Low Birth Weight Infants and Maternal Sociodemographic Status in Tuzla Canton during 19921995 War  

E-Print Network (OSTI)

Copyright 2010 Fahrija Skoki? et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Objectives. We examined association between incidence rate of low birth weight in liveborn infants and maternal sociodemographic status in Tuzla Canton during 19921995 war in Bosnia and Herzegovina. Methods. The present study covers a 22-year period (19882009), including the war period (19921995), and we retrospectively collected data on a total of 108 316 liveborn infants and their mothers from three different socioeconomic periods: before (19881991), during (19921995), and after the war (1996 2009). Association between incidence rate of low birth weight in liveborn infants and maternal sociodemographic status were determined for each study period. Results. There were 23 194 live births in the prewar, 18 302 during the war, and 66 820 in the postwar period. Among the liveborn infants born during the war, 1373 (7.5%) had birth weight of <2500 g, which is significantly more in comparison with 851 (3.6%) liveborn infants in this birth weight group born before and 1864 (2.8%) after the war. We found the number of examinations during pregnancy was 1.8 per pregnant woman in the war period, which was low in comparison with the number of examinations before (4.6 per pregnant woman) and after (7.1 per pregnant woman) the war (P <.001 for both). Prewar perinatal mortality LBW infants of 6.2 per 1000 live births increased to 10.8 per 1000 live births during the war (P <.001), but after the war, perinatal mortality LBW infants (5.2) and early neonatal mortality (2.4) decreased. Conclusions.

Period In Bosnia; Fahrija Skoki?; Dubravka Ba?aj; Amela Selimovi?; Evlijana Hasanovi?; Selma Muratovi?

2010-01-01T23:59:59.000Z

257

LINEAR COUNT-RATE METER  

DOE Patents (OSTI)

A linear count-rate meter is designed to provide a highly linear output while receiving counting rates from one cycle per second to 100,000 cycles per second. Input pulses enter a linear discriminator and then are fed to a trigger circuit which produces positive pulses of uniform width and amplitude. The trigger circuit is connected to a one-shot multivibrator. The multivibrator output pulses have a selected width. Feedback means are provided for preventing transistor saturation in the multivibrator which improves the rise and decay times of the output pulses. The multivibrator is connected to a diode-switched, constant current metering circuit. A selected constant current is switched to an averaging circuit for each pulse received, and for a time determined by the received pulse width. The average output meter current is proportional to the product of the counting rate, the constant current, and the multivibrator output pulse width.

Henry, J.J.

1961-09-01T23:59:59.000Z

258

Coal Transportation Rate Sensitivity Analysis  

Reports and Publications (EIA)

On December 21, 2004, the Surface Transportation Board (STB) requested that the Energy Information Administration (EIA) analyze the impact of changes in coal transportation rates on projected levels of electric power sector energy use and emissions.Specifically, the STB requested an analysis of changes in national and regional coalconsumption and emissions resulting from adjustments in railroad transportation rates for Wyoming's Powder River Basin (PRB) coal using the National Energy Modeling System(NEMS). However, because NEMS operates at a relatively aggregate regional level and does not represent the costs of transporting coal over specific rail lines, this analysis reports on the impacts of interregional changes in transportation rates from those used in the Annual Energy Outlook 2005 (AEO2005) reference case.

John Conti

2005-04-01T23:59:59.000Z

259

Billiards with polynomial mixing rates  

E-Print Network (OSTI)

While many dynamical systems of mechanical origin, in particular billiards, are strongly chaotic -- enjoy exponential mixing, the rates of mixing in many other models are slow (algebraic, or polynomial). The dynamics in the latter are intermittent between regular and chaotic, which makes them particularly interesting in physical studies. However, mathematical methods for the analysis of systems with slow mixing rates were developed just recently and are still difficult to apply to realistic models. Here we reduce those methods to a practical scheme that allows us to obtain a nearly optimal bound on mixing rates. We demonstrate how the method works by applying it to several classes of chaotic billiards with slow mixing as well as discuss a few examples where the method, in its present form, fails.

Nikolai Chernov; Hong-Kun Zhang

2004-09-12T23:59:59.000Z

260

Coal plasticity at high heating rates and temperatures  

SciTech Connect

The broad objective of this project is to obtain improved, quantitative understanding of the transient plasticity of bituminous coals under high heating rates and other reaction and pretreatment conditions of scientific and practical interest. To these ends the research plan is to measure the softening and resolidification behavior of two US bituminous coals with a rapid-heating, fast response, high-temperature coal plastometer, previously developed in this laboratory. Specific measurements planned for the project include determinations of apparent viscosity, softening temperature, plastic period, and resolidificationtime for molten coal: (1) as a function of independent variations in coal type, heating rate, final temperature, gaseous atmosphere (inert, 0{sub 2} or H{sub 2}), and shear rate; and (2) in exploratory runs where coal is pretreated (preoxidation, pyridine extraction, metaplast cracking agents), before heating. The intra-coal inventory and molecular weight distribution of pyridine extractables will also be measured using a rapid quenching, electrical screen heater coal pyrolysis reactor. The yield of extractables is representative of the intra-coal inventory of plasticing agent (metaplast) remaining after quenching. Coal plasticity kinetics will then be mathematically modeled from metaplast generation and depletion rates, via a correlation between the viscosity of a suspension and the concentration of deformable medium (here metaplast) in that suspension. Work during this reporting period has been concerned with re-commissioning the rapid heating rate plastometer apparatus.

Darivakis, G.S.; Peters, W.A.; Howard, J.B.

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Weighting and Bayes Nets for Rollup of Surveillance Metrics  

SciTech Connect

The LANL IKE team proposes that the surveillance metrics for several data stream that are used to detect the same failure mode be weighted. Similarly, the failure mode metrics are weighted to obtain a subsystem metric. E.g., if there n data streams (nodes 1-n), the failure mode (node 0) metric is obtained as M{sub 0} = w{sub 1}M{sub 1} + {hor_ellipsis} + w{sub n}M{sub n}, where {Sigma}{sub i=1}{sup n} w{sub i} = 1. This proposal has been implemented with Bayes Nets using the Netica/IKE software by specifying an appropriate conditional probability table (CPT). This CPT is calculated using the same form as (1), where the data stream metrics for the true (T) and false (F) states are replaced by 1 and 0, respectively. Then using this CPT, the failure mode metric calculated by Netica/IKE equals (1). This result has two nice features. First, the rollup Bayes nets is doing can be easily explained. Second, because Bayes Nets can implement this rollup using Netica/IKE, then data marshalling (allocating next year's budget) can be studied. A proof that the claim 'failure mode metric calculated by Netica/IKE equals (1)' for n = 2 and n = 3 follows as well as the sketch of a proof by induction for general n.

Henson, Kriste [Los Alamos National Laboratory; Sentz, Kari [Los Alamos National Laboratory; Hamada, Michael [Los Alamos National Laboratory

2012-04-30T23:59:59.000Z

262

Analyticity of Weighted Central Path and Error Bound for ...  

E-Print Network (OSTI)

locally at a superlinear rate under the sole assumption of strict complementarity, remains an open question. ..... N?)ij, for Bi > Nj,. (2.9d) which are still satisfied...

263

Hardware implementation of wireless bit rate adaptation  

E-Print Network (OSTI)

This thesis presents a hardware implementation of the SoftRate bit-rate adaptation protocol. SoftRate is a new bit-rate adaptation protocol, which uses per-bit confidence hints generated by the convolutional decoder to ...

Gross, Samuel A

2010-01-01T23:59:59.000Z

264

The impact of ventilation rate on the emission rates of volatile...  

NLE Websites -- All DOE Office Websites (Extended Search)

impact of ventilation rate on the emission rates of volatile organic compounds in residences Title The impact of ventilation rate on the emission rates of volatile organic...

265

Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Rate | Open Energy  

Open Energy Info (EERE)

Rate" Rate" Showing 13 pages using this property. 4 4b524791-bef2-49b1-850b-458730755203 + 5 +, 6 +, 3 +, ... 4b524791-bef2-49b1-850b-458730755203 + 6 + 4b524791-bef2-49b1-850b-458730755203 + 3 + 4b524791-bef2-49b1-850b-458730755203 + 7 + 4b524791-bef2-49b1-850b-458730755203 + 5 + 4b524791-bef2-49b1-850b-458730755203 + 8 + 4b524791-bef2-49b1-850b-458730755203 + 5 + 4b524791-bef2-49b1-850b-458730755203 + 5 + 4b524791-bef2-49b1-850b-458730755203 + 6 + 4b524791-bef2-49b1-850b-458730755203 + 6 + E E40880ac-c27b-4cbf-a011-b0d7d6e10fe9 + 1 + E40880ac-c27b-4cbf-a011-b0d7d6e10fe9 + 1 + E40880ac-c27b-4cbf-a011-b0d7d6e10fe9 + 1 + Retrieved from "http://en.openei.org/w/index.php?title=Property:OpenEI/UtilityRate/DemandRateStructure/Tier4Rate&oldid=53975

266

Energy Management Through Innovative Rates  

E-Print Network (OSTI)

Increased costs and a continuing dependence on uncertain supplies of domestic and foreign energy resources have prompted many companies to focus their attention on energy management. The author explores the potential for achieving a greater measure of energy efficiency in the industrial sector and specific rate design alternatives for doing so.

Williams, M. L.

1982-01-01T23:59:59.000Z

267

SIL rating fire protection equipment  

Science Conference Proceedings (OSTI)

SIL's (Safety Integrity Levels) are used by IEC 61508:1998 [1] to characterise the required functional safety of computer control systems. For example, SIL 4, the highest rating is for fly by wire aircraft and weapons systems and track circuited train ... Keywords: SIL, fire control panels, fire systems

Richard M. Robinson; Kevin J. Anderson

2003-10-01T23:59:59.000Z

268

Fast repetition rate (FRR) flasher  

DOE Patents (OSTI)

A fast repetition rate (FRR) flasher is described suitable for high flash photolysis including kinetic chemical and biological analysis. The flasher includes a power supply, a discharge capacitor operably connected to be charged by the power supply, and a flash lamp for producing a series of flashes in response to discharge of the discharge capacitor. A triggering circuit operably connected to the flash lamp initially ionizes the flash lamp. A current switch is operably connected between the flash lamp and the discharge capacitor. The current switch has at least one insulated gate bipolar transistor for switching current that is operable to initiate a controllable discharge of the discharge capacitor through the flash lamp. Control means connected to the current switch for controlling the rate of discharge of the discharge capacitor thereby to effectively keep the flash lamp in an ionized state between successive discharges of the discharge capacitor. Advantageously, the control means is operable to discharge the discharge capacitor at a rate greater than 10,000 Hz and even up to a rate greater than about 250,000 Hz. 14 figs.

Kolber, Z.; Falkowski, P.

1997-02-11T23:59:59.000Z

269

Electric Rate Alternatives to Cogeneration  

E-Print Network (OSTI)

This paper discusses electric rate alternatives to cogeneration for the industrial customer and attempts to identify the effects on the utility company, the industrial customer as well as remaining customers. It is written from the perspective of one company and its exposure to cogenerstion within its service territory.

Sandberg, K. R. Jr.

1988-09-01T23:59:59.000Z

270

Instability statistics and mixing rates  

E-Print Network (OSTI)

We claim that looking at probability distributions of \\emph{finite time} largest Lyapunov exponents, and more precisely studying their large deviation properties, yields an extremely powerful technique to get quantitative estimates of polynomial decay rates of time correlations and Poincar\\'e recurrences in the -quite delicate- case of dynamical systems with weak chaotic properties.

Roberto Artuso; Cesar Manchein

2009-06-03T23:59:59.000Z

271

2010FirmRateAdj  

NLE Websites -- All DOE Office Websites (Extended Search)

Firm Peaking Revenue Requirement 320.2 million P-SMPB--ED Composite Rate 33.25 millskWh Firm Demand 7.65kWmo Firm Energy 19.05 millskWh Firm Peaking Demand 6.90kWmo Firm...

272

Building Energy Performance Certificate. Asset Rating.  

U.S. Energy Information Administration (EIA)

Non-Domestic Building Energy Performance Asset Rating ... Asset Rating. Author: BRE Subject: LCEA029636 Keywords: Energy Performance Certificate ...

273

Energy Efficiency Interest Rate Reduction Program | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interest Rate Reduction Program Energy Efficiency Interest Rate Reduction Program Eligibility Residential Savings For Heating & Cooling Home Weatherization Construction Commercial...

274

Approximate Weighted Matching On Emerging Manycore and Multithreaded Architectures  

SciTech Connect

Graph matching is a prototypical combinatorial problem with many applications in computer science and scientific computing, but algorithms for computing optimal matchings are challenging to parallelize. Approximate matching algorithms provide an alternate route for parallelization, and in many contexts compute near-optimal matchings for large-scale graphs. We present sharedmemory parallel implementations for computing half-approximate weighted matching on state-of-the-art multicore (Intel Nehalem and AMD Magny-Cours), manycore (Nvidia Tesla and Nvidia Fermi) and massively multithreaded (Cray XMT) platforms. We provide two implementations: the first implementation uses shared work queues, and is suited to all these platforms; the second implementation is based on dataflow principles, and exploits the architectural features of the Cray XMT. Using a carefully chosen dataset that exhibits characteristics from a wide range of real-world applications, we show scalable performance across different platforms. In particular, for one instance of the input, an R-MAT graph (RMAT-G), we show speedups of: about 32 on 48 cores of an AMD Magny-Cours; 7 on 8 cores of Intel Nehalem; 3 on Nvidia Tesla and 10 on Nvidia Fermi relative to one core of Intel Nehalem; and 60 on 128 processors of Cray XMT. We demonstrate good weak and strong scaling for graphs with up to a billion edges using up to 12, 800 threads. Given the breadth of this work, we focus on simplicity and portability of software rather than excessive fine-tuning for each platform. To the best of our knowledge, this is the first such large-scale study of the half-approximate weighted matching problem on shared-memory platforms. Driven by the critical enabling role of combinatorial algorithms such as matching in scientific computing and the emergence of informatics applications, there is a growing demand to support irregular computations on current and future computing platforms. In this context, we evaluate the capability of emerging multithreaded platforms to tolerate latency induced by irregular memory access patterns, and to support fine-grained parallelism via light-weight synchronization mechanisms. By contrasting the architectural features of these platforms against the Cray XMT, which is specifically designed to support irregular memory-intensive applications, we delineate the impact of these choices on performance.

Halappanavar, Mahantesh; Feo, John T.; Villa, Oreste; Tumeo, Antonino; Pothen, Alex

2012-11-30T23:59:59.000Z

275

Analytic Approximation of Discrete Field Samples with Weighted Sums and the Gridless Computation of Field Derivatives  

Science Conference Proceedings (OSTI)

Objective analysis by weighted sums of discrete observations is equivalent to the approximation of the distribution of an observed parameter by a function which is also analytic, provided that the weighting function is both analytic and positive ...

F. Caracena

1987-12-01T23:59:59.000Z

276

The Impact of Signal Processing on the Range-Weighting Function for Weather Radars  

Science Conference Proceedings (OSTI)

The range-weighting function (RWF) determines how individual scatterer contributions are weighted as a function of range to produce the meteorological data associated with a single resolution volume. The RWF is commonly defined in terms of the ...

Sebastin M. Torres; Christopher D. Curtis

2012-06-01T23:59:59.000Z

277

Computing and Mapping Thiessen Weighting Factors from Digitized District Boundaries and Climatological Station Latitudes and Longitudes  

Science Conference Proceedings (OSTI)

A set of procedures, including computer software, which derive weighting factors for reducing point weather data to an areal district basis, are described and demonstrated. Areal estimates obtained by applying such weighting factors can be used, ...

H. N. Hayhoe; G. D. V. Williams

1982-10-01T23:59:59.000Z

278

Apparatus and method of determining molecular weight of large molecules  

DOE Patents (OSTI)

A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e.sup.- are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation.

Fuerstenau, Stephen (Montrose, CA); Benner, W. Henry (Danville, CA); Madden, Norman (Livermore, CA); Searles, William (Fremont, CA)

1998-01-01T23:59:59.000Z

279

Catalytic conversion of methanol to low molecular weight hydrocarbons. [Dissertation  

DOE Green Energy (OSTI)

The recent demands on the available energy have stimulated the search for alternatives to oil. Methanol, because of its abundance and the availability of technology to produce it from coal, is projected as an alternative source for producing low molecular weight olefins. Utilizing chabazite ion exchanged with ammonium and rare earth chlorides, methanol is converted to ethylene, propylene and propane with carbon yields of 70 to 90% at reaction temperatures of 633 to 723/sup 0/K and pressures from 1 to 18 atmospheres. X-ray diffraction studies, using Cu-K radiation, show no permanent structural changes after a long use. No permanent deactivation was observed even though the catalyst was overheated once, and have been deactivated and regenerated as many as 21 times. The ammonium exchange coupled with the water at high temperature suggest the formation of an ultrastable zeolite. Ethylene yields increase as the temperature increases from 633/sup 0/K to 723/sup 0/K.

Singh, B.B.

1979-12-01T23:59:59.000Z

280

Weight optimisation for iterative distributed model predictive control applied to power networks  

Science Conference Proceedings (OSTI)

This paper presents a weight tuning technique for iterative distributed Model Predictive Control (MPC). Particle Swarm Optimisation (PSO) is used to optimise both the weights associated with disturbance rejection and those associated with achieving consensus ... Keywords: Distributed model predictive control, Multi-agent, Particle swarm optimisation, Power networks, Smart grids, Weight tuning

Paul Mc Namara; Rudy R. Negenborn; Bart De Schutter; Gordon Lightbody

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

The status of low dose rate and future of high dose rate Cf-252 brachytherapy  

Science Conference Proceedings (OSTI)

This work describes the current status of the US low dose rate (LDR) Cf-252 brachytherapy program. The efforts undertaken towards development of a high dose rate (HDR) remotely after loaded Cf-252 source, which can accommodate 1 mg or greater Cf-252, are also described. This HDR effort is a collaboration between Oak Ridge National Laboratory (ORNL), commercial remote after loader manufactures, the Gershenson Radiation Oncology Center (ROC), and Wayne State University. To achieve this goal, several advances in isotope chemistry and source preparation at ORNL must be achieved to yield a specific material source loading of greater than or equal 1 mg Cf-252 per mm3. Development work with both radioactive and non-radioactive stand-ins for Cf-252 have indicated the feasibility of fabricating such sources. As a result, the decreased catheter diameter and computer controlled source placement will permit additional sites (e.g. brain, breast, prostate, lung, parotid, etc.) to be treated effectively with Cf-252 sources. Additional work at the Radiochemical Engineering and Development Center (REDC) remains in source fabrication, after loader modification, and safe design. The current LDR Cf-252 Treatment Suite at the ROC is shielded and licensed to hold up to 1 mg of Cf-252. This was designed to maintain cumulative personnel exposure, both external to the room and in direct isotope handling, at less than 20 microSv/hr. However, cumulative exposure may be greatly decreased if a Cf-252 HDR unit is employed which would eliminate direct isotope handling and decrease treatment times from tilde 3 hours to an expected range of 3 to 15 minutes. Such a Cf-252 HDR source will also demonstrate improved dose distributions over current LDR treatments due to the ability to step the point-like source throughout the target volume and weight the dwell time accordingly.

Rivard, M.J.; Wierzbicki, J.G.; Van den Heuvel, F.; Chuba, P.J.; Fontanesi, J. [Wayne State Univ., Detroit, MI (United States). Dept. of Radiation Oncology; Martin, R.C.; McMahon, R.R.; Haire, R.G. [Oak Ridge National Lab., TN (United States)

1997-12-01T23:59:59.000Z

282

Federal Energy Management Program: Water Rate Escalations  

NLE Websites -- All DOE Office Websites (Extended Search)

Rate Rate Escalations to someone by E-mail Share Federal Energy Management Program: Water Rate Escalations on Facebook Tweet about Federal Energy Management Program: Water Rate Escalations on Twitter Bookmark Federal Energy Management Program: Water Rate Escalations on Google Bookmark Federal Energy Management Program: Water Rate Escalations on Delicious Rank Federal Energy Management Program: Water Rate Escalations on Digg Find More places to share Federal Energy Management Program: Water Rate Escalations on AddThis.com... Sustainable Buildings & Campuses Operations & Maintenance Greenhouse Gases Water Efficiency Basics Federal Requirements Best Management Practices Analysis and Evaluation Water Rate Escalations Evaluation Service Contracts Case Studies Resources

283

Rates of Return and Alternative Measures of Capital  

E-Print Network (OSTI)

We employ the EU KLEMS database to estimate the real rate of return to capital in 14 countries (11 in the EU, three outside the EU) in 10 branches of the market economy plus the market economy as a whole. Our measure of capital is an aggregate over seven types of asset: three ICT assets (computers, communications equipment, and software) and four non-ICT assets (machinery and equipment, nonresidential structures, transport equipment, and other). The real rate of return in the market economy does not vary very much across countries, with the exception of Spain where it is exceptionally high and in Italy where it is exceptionally low. The real rate appears to be trendless in most countries. Within each country however, the rate varies widely across the 10 branches, often being implausibly high or low. We also estimate the growth of capital services by two different methods: ex-post and exante, and the contribution of capital to output growth by three methods: ex-post, ex-ante and hybrid. Our implementation of the ex-ante method uses an estimate of the required rate of return for each country instead of the actual, average rate of return to calculate user costs and also employs the expected growth of asset prices rather than the actual growth. These estimates are derived from exactly the same data as for the ex-post method, ie without any extraneous data being employed. For estimating the contribution of capital to output growth, the ex-ante method uses ex-ante profit as the weight, while both the ex-post and the hybrid method use ex-post profit. We find that the three methods produce very similar results at the market economy level. But differences are much larger at the branch level, particularly between the ex-post and ex-ante methods.

Nicholas Oulton; Ana Rincon-aznar Abstract

2009-01-01T23:59:59.000Z

284

P-D Project Rate Adjustment  

NLE Websites -- All DOE Office Websites (Extended Search)

Parker-Davis Project Rate Adjustment Data Parker-Davis Project Rate Adjustment Data FY2014 Informal Customer Meeting Notification of Meeting Presentation Preliminary CAS Preliminary Rate Design Preliminary PRS Final Documents Notification of Rates Final CAS Final Rate Design Final PRS FY2013 Informal Customer Meeting Notification of Meeting Presentation Preliminary CAS Preliminary Rate Design Preliminary PRS Supplemental Information Final Documents Notification of Rates Final CAS Final Rate Design Final PRS FY2012 Informal Customer Meeting Notification of Meeting Presentation Preliminary CAS Preliminary Rate Design Preliminary PRS Customer Requested Scenario Final Documents Notification of Rates Final CAS Final Rate Design Final PRS FY2011 Informal Customer Meeting Notification of Meeting Presentation Preliminary CAS Preliminary Rate Design

285

Further Study on Atmospheric Lapse Rate Regimes  

Science Conference Proceedings (OSTI)

Lapse rate, moist adiabatic lapse rate and the critical lapse rate for baroclinic adjustment are calculated as was done by Stone and Carlson using a different data set covering both hemispheres. Results show very good agreement in low latitudes, ...

Shi-Keng Yang; G. Louis Smith

1985-05-01T23:59:59.000Z

286

Narrowing the estimates of species migration rates  

E-Print Network (OSTI)

of species migration rates How fast can species migrate?estimate population growth rates for each population sinceon their data 1 show that the rate of population spread is

Blois, Jessica L.

2013-01-01T23:59:59.000Z

287

Light-Weight Radioisotope Heater Unit (LWRHU) sequential impact tests  

SciTech Connect

The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. A series of sequential impacts tests using simulant-fueled LWRHU capsules was recently conducted to determine a failure threshold. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Although the tests were conducted until the aeroshells were sufficiently distorted to be out of dimensional specification, the simulant-fueled capsules used in these tests were not severely deformed. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s. Postimpact examination revealed that the sequentially impacted capsules were slightly more deformed and were outside of dimensional specifications.

Reimus, M.A.H.; Rinehart, G.H.

1997-08-01T23:59:59.000Z

288

Light-weight radioisotope heater unit (LWRHU) impact tests  

SciTech Connect

The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s. {copyright} {ital 1998 American Institute of Physics.}

Reimus, M.A.; Rinehart, G.H.; Herrera, A.; Lopez, B.; Lynch, C.; Moniz, P. [Nuclear Materials Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

1998-01-01T23:59:59.000Z

289

Light-weight radioisotope heater unit (LWRHU) impact tests  

SciTech Connect

The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

Reimus, M. A. H.; Rinehart, G. H.; Herrera, A.; Lopez, B.; Lynch, C.; Moniz, P. [Nuclear Materials Technology Division, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

1998-01-15T23:59:59.000Z

290

4. Trends in Natural Gas Transportation Rates  

U.S. Energy Information Administration (EIA)

Energy Information Administration 39 Energy Policy Act Transportation Study: Interim Report on Natural Gas Flows and Rates 4. Trends in Natural Gas Transportation Rates

291

Definition: Thermal Rating | Open Energy Information  

Open Energy Info (EERE)

Rating Jump to: navigation, search Dictionary.png Thermal Rating The maximum amount of electrical current that a transmission line or electrical facility can conduct over a...

292

Form:Utility Rate | Open Energy Information  

Open Energy Info (EERE)

Form Edit History Facebook icon Twitter icon Form:Utility Rate Jump to: navigation, search Add or Update Utility Rate Information Retrieved from "http:en.openei.orgw...

293

CRSP Transmission Sales Rate History  

NLE Websites -- All DOE Office Websites (Extended Search)

Updated: 12/20/2013 Updated: 12/20/2013 CRSP Transmission Sales Rate History Rate Schedule Effective Dates Nonfirm (Mills/kWh) Firm ($/kW-yr.) Firm ($/kW-mo.) None Through 3/83 1.000 $ 6.60 $0.55 SP-FT1 4/83 - 6/86 N.A. $10.27 $0.86 SP-NFT1 4/83 - 6/86 2.000 N.A. SP-FT2 7/86 - 6/89 N.A. $15.94 $1.33 SP-NFT2 7/86 - 7/89 3.100 N.A. SP-FT3 7/89 - 9/92 N.A. $21.72 $1.81 SP-NFT3 8/89 - 3/98 Mutually Agreed N.A. SP-FT4 10/92 - 3/98 N.A. $22.68 $1.89 SP-NFT4 4/98 - 3/03 Mutually Agreed N.A. SP-PTP5 4/98 - 3/99 N.A. $26.70 $2.23 4/99 - 3/00 N.A. $26.19 $2.18 4/00 - 3/01 N.A. $26.14 $2.18 4/01 - 3/02 N.A. $25.63 $2.14 4/02 - 9/02 N.A. $21.33 $1.78 SP-NFT5 10/02 - 9/07 Mutually Agreed N.A. 10/07-9/08 Mutually Agreed N.A. SP-PTP6 10/02 - 9/03 N.A. $24.72 $2.06

294

utility rate | OpenEI Community  

Open Energy Info (EERE)

utility rate utility rate Home Sfomail's picture Submitted by Sfomail(48) Member 17 May, 2013 - 11:14 Utility Rates API Version 2 is Live! API developer OpenEI update utility Utility Companies utility rate Utility Rates version 1 version 2 version 3 web service Smart meter After several months of development and testing, the next generation web service for the utility rate database is finally here! I encourage you to check out the V2 Utility Rates API at http://en.openei.org/services/doc/rest/util_rates Rmckeel's picture Submitted by Rmckeel(297) Contributor 22 June, 2012 - 09:30 Increasing ask query limit developer utility rate An NREL user who is trying to use the utility rate service was having an issue. He writes "I noticed that any rates past 10,000 are not accessible via json. For example, this query only returns two entries:

295

Wholesale Power Rate Schedules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Rate Schedules » Wholesale Power Rate Schedules Services » Rate Schedules » Wholesale Power Rate Schedules Wholesale Power Rate Schedules October 1, 2012 ALA-1-N Wholesale Power Rate Schedule Area: PowerSouth Energy Cooperative System: Georgia-Alabama-South Carolina October 1, 2012 Duke-1-E Wholesale Power Rate Schedule Area: Duke On-System System: Georgia-Alabama-South Carolina October 1, 2012 Duke-2-E Wholesale Power Rate Schedule Area: Central System: Georgia-Alabama-South Carolina October 1, 2012 Duke-3-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina October 1, 2012 Duke-4-E Wholesale Power Rate Schedule Area: Duke Self-Schedulers System: Georgia-Alabama-South Carolina October 1, 2012 MISS-1-N Wholesale Power Rate Schedule Area: South Mississippi Electric Power Association

296

Wholesale Power Rate Schedules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Rate Schedules » Wholesale Power Rate Schedules Services » Rate Schedules » Wholesale Power Rate Schedules Wholesale Power Rate Schedules October 1, 2012 ALA-1-N Wholesale Power Rate Schedule Area: PowerSouth Energy Cooperative System: Georgia-Alabama-South Carolina October 1, 2012 Duke-1-E Wholesale Power Rate Schedule Area: Duke On-System System: Georgia-Alabama-South Carolina October 1, 2012 Duke-2-E Wholesale Power Rate Schedule Area: Central System: Georgia-Alabama-South Carolina October 1, 2012 Duke-3-E Wholesale Power Rate Schedule Area: None System: Georgia-Alabama-South Carolina October 1, 2012 Duke-4-E Wholesale Power Rate Schedule Area: Duke Self-Schedulers System: Georgia-Alabama-South Carolina October 1, 2012 MISS-1-N Wholesale Power Rate Schedule Area: South Mississippi Electric Power Association

297

Property:OpenEI/UtilityRate/EnergyRateStructure/Tier5Rate | Open Energy  

Open Energy Info (EERE)

Rate" Rate" Showing 25 pages using this property. (previous 25) (next 25) 0 00c88d6d-e3b0-4128-ad3e-a93f686cf6e3 + 0.227 + 00c88d6d-e3b0-4128-ad3e-a93f686cf6e3 + 0.227 + 00c88d6d-e3b0-4128-ad3e-a93f686cf6e3 + 0.227 + 019be14c-4635-4529-af90-799cbf5d7865 + 0.0335 + 019be14c-4635-4529-af90-799cbf5d7865 + 0.0335 + 02b061e1-f065-421e-9ebc-76aef4734486 + 0.079 + 02b061e1-f065-421e-9ebc-76aef4734486 + 0.079 + 02fc76fd-35ff-44c3-bc85-1fb1918f125b + 0.0978 + 02fc76fd-35ff-44c3-bc85-1fb1918f125b + 0.0978 + 0402cc99-ab16-40cc-83e7-2c5910a825a1 + 0.061 + 0402cc99-ab16-40cc-83e7-2c5910a825a1 + 0.061 + 041466a9-81ca-4fce-90e3-e718159347a9 + 0.0587 +, 0.044 + 041466a9-81ca-4fce-90e3-e718159347a9 + 0.044 + 041466a9-81ca-4fce-90e3-e718159347a9 + 0.0587 + 047086c9-976d-4a05-90d5-b67afaf60851 + 0.0583 +

298

Distributed Rate Allocation for Wireless Networks  

E-Print Network (OSTI)

This paper describes a distributed algorithm for rate allocation in wireless networks. As the main result, the paper establishes that this algorithm is throughput-optimal for very general class of throughput regions. In contrast to distributed on-off scheduling algorithms, this algorithm enables optimal utilization of physical layer schemes by scheduling multiple rate levels. The algorithm is based on a Markov process on these discrete set of rates with certain transition rates. For dealing with multiple rate levels, the paper introduces an important structure for the transition rates, which enable the design of appropriate update rule for these transition rates. The update uses local queue length information alone, and thus does not require global exchange of queue length information. In addition, the algorithm requires that each link can determine the feasibility of increasing its data-rate from the current value without reducing the data-rates of other links. Determining rate feasibility does not introduce...

Jose, Jubin

2010-01-01T23:59:59.000Z

299

Design of Light Weight Structure for Wind Turbine Tower by Using ...  

Science Conference Proceedings (OSTI)

This paper reports a new design scheme of light weight structure for wind turbine tower. This design scheme is based on the integration of the nano-structured...

300

as adopted by the 97th National Conference on Weights and ...  

Science Conference Proceedings (OSTI)

Page 1. as adopted by the 97th National Conference on Weights and Measures 2012 2013 Page 2. Specifications, Tolerances, and Other Technical ...

2012-11-15T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

ORIGINAL RESEARCH Strategies for and Barriers to Managing Weight When Eating at Restaurants  

E-Print Network (OSTI)

Suggested citation for this article: Timmerman GM, Earvolino-Ramirez M. Strategies for and barriers to managing weight when eating at restaurants. Prev Chronic

Gayle M. Timmerman; Cns Marie Earvolino-ramirez; Peer Reviewed

2010-01-01T23:59:59.000Z

302

AN ALGORITHM FOR THE GENERATION OF NUCLEAR SPIN SPECIES AND NUCLEAR SPIN STATISTICAL WEIGHTS  

E-Print Network (OSTI)

Chemistry AN ALGORITHM FOR THE GENERATION OF NUCLEAR SPINSPECIES AND NUCLEAR SPIN STATISTICAL WEIGHTS K.for the Generation of Nuclear Spin and Nuclear Spin

Balasubramanian, K.

2013-01-01T23:59:59.000Z

303

Computerized extrapolation of hydrolysis rate data  

Science Conference Proceedings (OSTI)

The program RATE was developed to aid in the extrapolation and interpretation of hydrolysis rate data to a format that is useful for environmental risk assessment. Hydrolysis data typically are reported in the literature as pseudo-first-order rate constants at the temperature and pH of the reaction medium used to obtain the kinetics information. The utility of RATE lies in its ability to estimate first-order rate constants at other values of temperature and pH and to convert pseudo-first-order rate constants to second-order rate constants. RATE also will calculate the half-life for the overall reaction, including neutral-, base-, and acid-mediated hydrolysis, at any selected temperature and pH. RATE, programmed in FORTRAN, is used to systematically analyze data for entry in FATE, a comprehensive environmental fate constants information system database.

Hamrick, K.J.; Kollig, H.P.; Bartell, B.A.

1992-01-01T23:59:59.000Z

304

Wholesale Power Rate Schedules | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Schedules Schedules Wholesale Power Rate Schedules October 1, 2011 CBR-1-H Wholesale Power Rate Schedule Area: Big Rivers and Henderson, KY System: CU October 1, 2011 CSI-1-H Wholesale Power Rate Schedule Area: Southern Illinois System: CU October 1, 2011 CK-1-H Wholesale Power Rate Schedule Area: KU Area System: CU October 1, 2011 CEK-1-H Wholesale Power Rate Schedule Area: East Kentucky System: CU October 1, 2011 CC-1-I Wholesale Power Rate Schedule Area: CP&L Area, Western Division System: CU September 20, 2011 JW-1-J Wholesale Power Rate Schedule Area: Woodruff Preference Customer System: Jim Woodruff September 20, 2011 JW-2-F Wholesale Power Rate Schedule Area: Florida Power Corporation System: Jim Woodruff November 17, 2010 AP-1-B Wholesale Power Rate Schedule Area: American Electric Power

305

1996 Wholesale Power and Transmission Rate Schedules.  

Science Conference Proceedings (OSTI)

Bonneville Power Administration`s (BPA) 1996 Wholesale Power Rate Schedules, 1996 Ancillary Products and Services Rate Schedule, 1996 Transmission Rate Schedules, and General Rate Schedule Provisions, contained herein, were approved on an interim basis effective October 1, 1996. These rate schedules and provisions were approved by the Federal Energy Regulatory Commission (FERC), United States Department of Energy, in September 1996 (Docket Nos EF96-2011-000 and EF96f-2021-000). These rate schedules and General Rate Schedule Provisions were approved on a final basis by the FERC July 30, 1997, in Dept. of Energy--Bonneville Power Administration, Docket Nos. EF96-2011-000 and EF96-2021-000. Except as noted elsewhere, these 1996 rate schedules and provisions supersede BPA`s Wholesale Power Rate Schedules and General Rate Schedule Provisions, and Transmission Rate Schedules and General Transmission Rate Schedule Provisions, effective October 1, 1995. These rate schedules and general rate schedule provisions include all errata.

United States. Bonneville Power Administration.

1996-10-01T23:59:59.000Z

306

Dynamic filter weights neural network model integrated with differential evolution for day-ahead price forecasting in energy market  

Science Conference Proceedings (OSTI)

In this paper a new dynamic model for forecasting electricity prices from 1 to 24h in advance is proposed. The model is a dynamic filter weight Adaline using a sliding mode weight adaptation technique. The filter weights for this neuron constitute of ... Keywords: Differential evolution, Dynamic filter weights neuron, Energy market, Local linear wavelet neural network, Sliding mode control

S. Chakravarty; P. K. Dash

2011-09-01T23:59:59.000Z

307

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: API Type Term Title Author Replies Last Post sort icon Blog entry API The utility rate database version 1 API is now deprecated Rmckeel 6 Sep 2013 - 14:00 Blog entry API Lighting Electricity Rates on OpenEI Sfomail 31 May 2013 - 12:04 Blog entry API Utility Rates API Version 2 is Live! Sfomail 17 May 2013 - 11:14 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis

308

Cross-layer wireless bit rate adaptation  

E-Print Network (OSTI)

This paper presents SoftRate, a wireless bit rate adaptation protocol that is responsive to rapidly varying channel conditions. Unlike previous work that uses either frame receptions or signal-to-noise ratio (SNR) estimates ...

Vutukuru, Mythili

2009-01-01T23:59:59.000Z

309

Cross-Layer Wireless Bit Rate Adaptation  

E-Print Network (OSTI)

This paper presents SoftRate, a wireless bit rate adaptation protocol that is responsive to rapidly varying channel conditions. Unlike previous work that uses either frame receptions or signal-to-noise ratio (SNR) estimates ...

Vutukuru, Mythili

310

Transfer Rate vs. I/O Units  

NLE Websites -- All DOE Office Websites (Extended Search)

O Units Transfer Rate vs. IO Units These plots show the transfer rate from the IO benchmarks as a function of the number of elizaio units in use for each particular eliza at the...

311

OpenEI Community - utility rate  

Open Energy Info (EERE)

Rates API Rates API Version 2 is Live! http://en.openei.org/community/blog/utility-rates-api-version-2-live Smart meterAfter several months of development and testing, the next generation web service for the utility rate database is finally here! I encourage you to check out the V2 Utility Rates API at rates">http://en.openei.org/services/doc/rest/util_ratesrates-api-version-2-live" target="_blank">read more

312

Cumulus Parameterization and Rainfall Rates I  

Science Conference Proceedings (OSTI)

Modeling of convective rainfall rates is a central problem in tropical meteorology. Toward numerical weather prediction efforts the semi-prognostic approach (i.e., a one time-step prediction of rainfall rates) provides a relevant test of cumulus ...

T. N. Krishnamurti; Y. Ramanathan; Hua-Lu Pan; Richard J. Pasch; John Molinari

1980-04-01T23:59:59.000Z

313

Why Oceanic Dissipation Rates Are Not Lognormal  

Science Conference Proceedings (OSTI)

In their derivation of the lognormal probability density function for volume-averaged dissipation rates, Gurvich and Yaglom assumed explicitly that these dissipation rates are statistically homogeneous and that the averaging scale is small ...

Hidekatsu Yamazaki; Rolf Lueck

1990-12-01T23:59:59.000Z

314

A Probability Distribution Model for Rain Rate  

Science Conference Proceedings (OSTI)

A systematic approach is suggested for modeling the probability distribution of rain rate. Rain rate, conditional on rain and averaged over a region, is modeled as a temporally homogeneous diffusion process with appropriate boundary conditions. ...

Benjamin Kedem; Harry Pavlopoulos; Xiaodong Guan; David A. Short

1994-12-01T23:59:59.000Z

315

Rain Rate Estimates from Differential Polarization Measurements  

Science Conference Proceedings (OSTI)

This paper presents an analysis of the accuracy of rain rate estimates from data observed with a radar that has alternating horizontal and vertical polarization. Theoretical accuracies of rain rates from the reflectivity, the differential ...

M. Sachidananda; D. S. Zrni?

1987-12-01T23:59:59.000Z

316

On-site Housing Rates | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates Effective February 1, 2013 Rates for Occupancy < 30-Days Guest House* SingleDouble: 105.00 per day Housekeeping service is provided on all working days. *Alternatives to...

317

CONVERGENCE AND CONVERGENCE RATE OF STOCHASTIC ...  

E-Print Network (OSTI)

gence rate of { ?f(?n)2}n?0 and {f(?n)}n?0 is the slower of the rates O(??r? n. ) (the ...... for ??,s nj ? knj+1. Then...

318

Geomagnetic Reversals: Rates, Timescales, Preferred Paths,  

E-Print Network (OSTI)

Geomagnetic Reversals: Rates, Timescales, Preferred Paths, Statistical Models and Simulations: Geomagnetic reversals, Reversal rates, Paleointensity, Statistics of Geodynamo September 30, 2001 #12;Abstract Paleomagnetic data on geomagnetic reversals are divided into two general categories: times of occurrence

Constable, Catherine G.

319

Rio Grande Project Power Sales Rate History  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Sales Rate History Updated: 1022009 Rate Schedule Effective Dates Energy (MillskWh) Capacity (kW-mo.) Combined (MillskWh) R5-F1 1940 - 1949 3.000 - 8.000 (declining...

320

Collbran Project Power Sales Rate History  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Sales Rate History Updated: 1022009 Rate Schedule Effective Dates Energy (MillskWh) Capacity (kW-mo.) Combined (MillskWh) Contract 1262 - 1283 (Firm Only) (Nonfirm...

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

The estimates of approximation by using a new type of weighted modulus of continuity  

Science Conference Proceedings (OSTI)

In this paper, we introduce a new type modulus of continuity for function f belonging to a particular weighted subspace of C[0,~) and show that it has some properties of ordinary modulus of continuity. We obtain some estimates of approximation of functions ... Keywords: Beurling classes, Modulus of continuity, Positive linear operators, Weighted spaces

A. D. Gadjiev; A. Aral

2007-07-01T23:59:59.000Z

322

Oligomer Molecular Weight Distribution 515 Applied Biochemistry and Biotechnology Vol. 105108, 2003  

E-Print Network (OSTI)

Oligomer Molecular Weight Distribution 515 Applied Biochemistry and Biotechnology Vol. 105 of Molecular Weight Distribution of Oligomers from Autocatalyzed Batch Hydrolysis of Xylan XIA LI,* ALVIN O or xylan can be carried out in a single step by reaction with steam or water, often termed autohydrolysis

California at Riverside, University of

323

DYNAMIC RESOURCE CONSTRAINED MULTI-PROJECT SCHEDULING PROBLEM WITH WEIGHTED EARLINESS/TARDINESS COSTS1  

E-Print Network (OSTI)

for the dynamic multi-project scheduling problem with weighted earliness/tardiness costs (DRCMPSPWET of an existing project portfolio and a due date has to be quoted for the new project while minimizing the costs1 DYNAMIC RESOURCE CONSTRAINED MULTI-PROJECT SCHEDULING PROBLEM WITH WEIGHTED EARLINESS

Yanikoglu, Berrin

324

USING WEIGHTED SUM METHOD FOR THE CHOICE OF THE NIGHT VISION GOGGLES BATTERY POWER SUPPLY  

E-Print Network (OSTI)

USING WEIGHTED SUM METHOD FOR THE CHOICE OF THE NIGHT VISION GOGGLES BATTERY POWER SUPPLY Daniela into account device working range, weight and price and also electrical battery power supply lifetime, temperature working range and its mechanics. The multicriteria optimization choice of the electrical battery

Borissova, Daniela

325

Towards an Efficient Network Selection Technique Based on Differentiated Weight of Access Interface  

Science Conference Proceedings (OSTI)

In this work, the authors have proposed a new technique for network selection decision. This technique combines two multi attribute decision making MADM methods. The analytic network process ANP method to find the differentiate weights of available networks ... Keywords: Analytic Network Process ANP, Differentiated Weight, Heterogeneous Multi-Access, IEEE 802.21, Multi Attribute Decision Making MADM, Network Selection

Mohamed Lahby; Leghris Cherkaoui; Abdellah Adib

2012-10-01T23:59:59.000Z

326

Weighted distance transforms generalized to modules and their computation on point lattices  

Science Conference Proceedings (OSTI)

This paper presents the generalization of weighted distances to modules and their computation through the chamfer algorithm on general point lattices. The first part is dedicated to formalization of definitions and properties (distance, metric, norm) ... Keywords: Chamfer algorithm, Distance transform, Non-standard grids, Weighted distance

Cline Fouard; Robin Strand; Gunilla Borgefors

2007-09-01T23:59:59.000Z

327

Time-Varying PLC Network Modeling with Wavelet MDFB and Weighted OFDM Precoders  

Science Conference Proceedings (OSTI)

The paper addresses a problem of designing a simple, efficient power line network simulator embedded with two types of multirate filter bank precoders, weighted orthogonal frequency division multiplexing (OFDM) and wavelet-based maximally decimated filter ... Keywords: Power line communications (PLC), Weighted OFDM, Wavelet-based MDFB, Time-varying block transmission, Interblock interference (IBI)

Tae-Eung Sung

2009-07-01T23:59:59.000Z

328

Using the method of weighted residuals to compute potentials of mean force  

Science Conference Proceedings (OSTI)

We propose a general framework for approximating the potential of mean force (PMF) along a reaction coordinate in conformational space. This framework, based on the method of weighted residuals, can be viewed as a generalization of thermodynamic integration ... Keywords: Free energy, Histogram methods, Method of weighted residuals, Potential of mean force, Thermodynamic integration

Eric C. Cyr; Stephen D. Bond

2007-07-01T23:59:59.000Z

329

Delay Stability Regions of the Max-Weight Policy under Heavy-Tailed Traffic  

E-Print Network (OSTI)

Delay Stability Regions of the Max-Weight Policy under Heavy-Tailed Traffic Mihalis G. Markakis operated under the Max- Weight scheduling policy, for the case where one of the queues is fed by heavy system exemplifies an intricate phenomenon whereby heavy-tailed traffic at one queue may or may

Tsitsiklis, John

330

Effects of Sequence Partitioning on Compression Rate  

E-Print Network (OSTI)

In the paper, a theoretical work is done for investigating effects of splitting data sequence into packs of data set. We proved that a partitioning of data sequence is possible to find such that the entropy rate at each subsequence is lower than entropy rate of the source. Effects of sequence partitioning on overall compression rate are argued on the bases of partitioning statistics, and then, an optimization problem for an optimal partition is defined to improve overall compression rate of a sequence.

Alagoz, B Baykant

2010-01-01T23:59:59.000Z

331

Science & Technology Principal Directo rate Industrial ...  

Erik Stenehjem Science & Technology Principal Directo rate Industrial Partnerships Office Erik Stenehjem Director----Roger Werne Deputy Director

332

Reproduction Rates for 19902002 and Intrinsic Rates for 20002001: United States  

E-Print Network (OSTI)

ObjectiveThis report presents revised rates of reproduction for 199093, reproduction rates for 19942002, and intrinsic rates for 20002001. The revised rates for 199193 are based on populations consistent with the April 1, 2000, census, as are the rates for 19942002. MethodsTabular and graphic data on the reproduction and intrinsic rates by race and Hispanic origin of mother are presented and described. ResultsRates of reproduction (total fertility, gross reproduction, and net reproduction rates), the intrinsic rate of natural increase, and the intrinsic birth rate were lower in 2001 (and 2002) than 1990. Among the race and Hispanic subgroups, the reproduction rates were lower for all groups except Cubans and whites (total). The overall intrinsic death rate increased between 1990 and 2001 with the rate declining for whites (total) but increasing for blacks (total).

Brady E. Hamilton, Ph.D.; Division Of Vital Statistics

2004-01-01T23:59:59.000Z

333

EPRI's Twelfth Heat Rate Improvement Conference Proceedings  

Science Conference Proceedings (OSTI)

The Twelfth Heat Rate Improvement Conference, sponsored by EPRI's Heat Rate and Cost Optimization Value Package, is the latest in a series of meetings designed to assist utilities in addressing problems with power plant performance and in identifying cost-effective solutions for achieving and maintaining heat rate improvement. The last conference was held in Baltimore in September 1998.

2001-01-22T23:59:59.000Z

334

Definition: Emergency Rating | Open Energy Information  

Open Energy Info (EERE)

Emergency Rating Emergency Rating Jump to: navigation, search Dictionary.png Emergency Rating The rating as defined by the equipment owner that specifies the level of electrical loading or output, usually expressed in megawatts (MW) or Mvar or other appropriate units, that a system, facility, or element can support, produce, or withstand for a finite period. The rating assumes acceptable loss of equipment life or other physical or safety limitations for the equipment involved.[1] Related Terms rating References ↑ Glossary of Terms Used in Reliability Standards An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Emergency_Rating&oldid=480317" Categories:

335

Water Rate Escalations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rate Escalations Rate Escalations Water Rate Escalations October 8, 2013 - 9:55am Addthis Federal agencies need accurate water cost escalation rates to perform life cycle cost analyses for water efficiency projects to meet Executive Order 13514 and Energy Independence and Security Act of 2007 requirements. To estimate long-term escalation rates of potable water, Pacific Northwest National Laboratory (PNNL) conducted an analysis. Using the trends from this study, Federal facility managers can select escalation rates from studied cities with similar circumstances to their facility locations such as U.S. region, water source, or drought tendencies. Also they can make more informed choices on possible water escalation rates that can be used in economic analysis of water efficiency projects.

336

Utility Rates | OpenEI Community  

Open Energy Info (EERE)

Utility Rates Utility Rates Home Rmckeel's picture Submitted by Rmckeel(297) Contributor 6 September, 2013 - 14:00 The utility rate database version 1 API is now deprecated API Utility Rates There comes a time in every API version's lifecycle when it needs to be deprecated. OpenEI's utility rate database version 1 API has been in use since the inception of the database in 2010. As Illinois State University has taken a commanding lead of the project and its data curation, we have updated the schema and API to version 2 to present a richer spectrum of utility rate data. Rmckeel's picture Submitted by Rmckeel(297) Contributor 11 June, 2013 - 09:33 Tip for working with approvals on OpenEI EZFeed Utility Rates The "ApprovedRevs" extension is the feature on OpenEI that allows

337

Definition: Penetration Rate | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Penetration Rate Jump to: navigation, search Dictionary.png Penetration Rate The Rate of penetration, abbreviated as ROP as used in the drilling industry, is the speed at which a drill bit breaks the rock under it to deepen the borehole. It is normally measured in feet per minute or meters per hour, but sometimes it is expressed in minutes per foot.[1] View on Wikipedia Wikipedia Definition The Rate of penetration, abbreviated as ROP as used in the drilling industry, is the speed at which a drill bit breaks the rock under it to deepen the borehole. Also known as penetration rate or drill rate. It is normally measured in feet per minute or meters per hour, but sometimes it is expressed in minutes per foot.

338

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: developer Type Term Title Author Replies Last Post sort icon Blog entry developer Utility Rates API Version 2 is Live! Sfomail 17 May 2013 - 11:14 Discussion developer Utility rate change propagation is now much faster Rmckeel 1 21 Mar 2013 - 09:11 Blog entry developer OpenEI maintenance March 8-9, 2013 Rmckeel 8 Mar 2013 - 14:23 Blog entry developer Semantic Mediawiki Semantic Forms update Rmckeel 22 Oct 2012 - 07:23 Discussion developer Increasing ask query limit Rmckeel 1 28 Jun 2012 - 14:35 Groups Menu You must login in order to post into this group. Recent content FYI, OpenEI now accommodates t... Very useful information. Thank...

339

Rate-Making Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rate-Making Policy Rate-Making Policy Rate-Making Policy < Back Eligibility Investor-Owned Utility Rural Electric Cooperative Utility Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info Start Date 2005 State Wisconsin Program Type Generating Facility Rate-Making Provider Public Service Commission of Wisconsin WI Act 7 states that, when proposing the purchase or construction of an electric generating facility, a utility may "apply to the [WI Public Service Commission] for an order specifying in advance the rate-making principles" that the Public Service Commission will use for "future rate-making proceedings." The Nuclear Energy Institute highlights that "There is no restriction on

340

On loading rate effects in toughening processes  

SciTech Connect

Environmental crack tip reactions are a known source of premature fracture in oxides. These rate-dependent phenomena commonly are studied in strength tests where loading rate serves as the major experimental variable. A material susceptible to environmentally-assisted crack growth is stronger at fast testing rates. A topic which has received far less attention is the influence of stressing rate or loading rate on the shielding processes which occur at some distance from the crack tip, although the inverse has been studied by Deuerler et al. The authors present here the first known documentation of a loading rate effect on shielding phenomena in ceramic materials. For these experiments Coors AD 94 alumina was chosen for study.

Tandon, S.; Faber, K.T. [Northwestern Univ., Evanston, IL (United States)

1996-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Definition: Dynamic Capability Rating | Open Energy Information  

Open Energy Info (EERE)

Capability Rating Capability Rating Jump to: navigation, search Dictionary.png Dynamic Capability Rating Dynamic capability rating can be achieved through real-time determination of an element's (e.g., line, transformer etc.) ability to carry load based on electrical and environmental conditions.[1] Related Terms rating References ↑ SmartGrid.gov 'Description of Functions' An LikeLike UnlikeLike You like this.Sign Up to see what your friends like. inline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Dynamic_Capability_Rating&oldid=506158" Categories: Definitions ISGAN Definitions What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load)

342

Building energy benchmarks and rating tools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building energy benchmarks and rating tools Building energy benchmarks and rating tools Building energy benchmarks and rating tools Building energy benchmarks and rating tools More...

343

Loads, capacity, and failure rate modeling  

SciTech Connect

Both failure rate and load capacity (stress-strength) interferenece methodologies are employed in the reliability analysis at nuclear facilities. Both of the above have been utilized in a heuristic failure rate model in terms of load capacity inference. Analytical solutions are used to demonstrate that infant mortality and random aging failures may be expressed implicity in terms of capacity variability, load variability, and capacity deterioration, and that mode interactions play a role in the formation of the bathtub curve for failure rates.

Lewis, E.E.; Chen, Hsin-Chieh

1994-12-31T23:59:59.000Z

344

FERC rate incentives for transmission infrastructure development  

Science Conference Proceedings (OSTI)

With enactment of the Energy Policy Act of 2005, Congress delivered a mandate to the Federal Energy Regulatory Commission to establish regulations that would provide for incentive-based rate treatments for investments that would improvement the nation's electric transmission system. That has required FERC to move from merely approving cost-based rates for transmission services to enacting new regulations that would make it more attractive to invest in transmission infrastructure without offending the ''just and reasonable'' rate standard. (author)

Snarr, Steven W.

2010-03-15T23:59:59.000Z

345

2007 EPRI Heat Rate Improvement Conference Proceedings  

Science Conference Proceedings (OSTI)

Due to the rising cost of fuel and the growing possibility of carbon taxes in the not-too-distant future, utilities are once again focusing on the heat rate and performance of coal-fired power plants. The fifteenth Heat Rate Improvement Conference is the latest in this series of meetings designed to assist utilities in addressing problems with power plant performance and in identifying cost-effective solutions for achieving and maintaining heat rate improvement.

2007-03-30T23:59:59.000Z

346

Proceedings 2013 Heat Rate Improvement Conference  

Science Conference Proceedings (OSTI)

With the rising cost of fuel and the strong possibility of CO2 emissions regulations and limitations in the near future, utilities and power generation companies are focusing on power plant heat rate and performance. The 18th Heat Rate Improvement Conference is the latest in a series of meetings designed to assist attendees in addressing problems with power plant performance and identifying cost-effective solutions for achieving and sustaining heat rate ...

2013-04-05T23:59:59.000Z

347

DETERMINATION OF DEPOSITION RATES FOR COOKING ...  

Science Conference Proceedings (OSTI)

... All calculations of deposition rates were made after ... the in- duct electrostatic precipitator increased the ... (1985) measured the performance of several ...

2005-10-07T23:59:59.000Z

348

Utility Rate Discounts | Open Energy Information  

Open Energy Info (EERE)

Discounts Discounts Jump to: navigation, search A few electric utilities offer rate discounts to encourage residential energy efficiency. For homes that meet certain energy efficiency criteria, such as those established by the federal Energy Star program, the owner or tenant is awarded a percentage discount on each month’s electric bill. [1] Contents 1 Utility Rate Discount Incentives 2 References Utility Rate Discount Incentives CSV (rows 1 - 14) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Cleco Power - Power Miser New Home Program (Louisiana) Utility Rate Discount Louisiana Residential Building Insulation Central Air conditioners Clothes Washers Comprehensive Measures/Whole Building Doors Duct/Air sealing Furnaces Heat pumps

349

Rate Schedule PACI-T3  

NLE Websites -- All DOE Office Websites (Extended Search)

or rate schedule accepted or approved by the Federal Energy Regulatory Commission (FERC) or other regulatory bodies will be passed on to each relevant customer. The FERC's or...

350

DEC Asset Rating | CUBIC APPLE LTD  

U.S. Energy Information Administration (EIA)

NON-DOMESTIC ENERGY ... if you are worried about the DEC asset rating for your public building why not get in contact with Cubic Apple on 01529 300 ...

351

Available Technologies: Super High Rate Sputter Deposition  

Andre Anders of Berkeley Lab has developed a very high deposition rate magnetron sputtering wherein the surface of a target and the race track zone area of the ...

352

Rate Schedule CV-EID4  

NLE Websites -- All DOE Office Websites (Extended Search)

CV-EID3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR ENERGY IMBALANCE SERVICE Effective: October 1, 2011,...

353

Rate Schedule CV-SUR4  

NLE Websites -- All DOE Office Websites (Extended Search)

CV-SUR3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR SUPPLEMENTAL RESERVE SERVICE Effective: October 1, 2011,...

354

Rate Schedule CV-SPR4  

NLE Websites -- All DOE Office Websites (Extended Search)

CV-SPR3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR SPINNING RESERVE SERVICE Effective: October 1, 2011,...

355

Dose rate visualization of radioisotope thermoelectric generators  

DOE Green Energy (OSTI)

Advanced visualization techniques can be used to investigate gamma ray and neutron dose rates around complex dose rate intensive operations. A method has been developed where thousands of dose points are calculated using the MCNP(Monte Carlo N-Particle) computer code and then displayed to create color contour plots of the dose rate for complex geometries. Once these contour plots are created, they are sequenced together creating an animation to dynamically show how the dose rate changes with changes in the geometry or source over time.

Schwarz, R.A.; Kessler, S.F.; Tomaszewski, T.A.

1995-09-01T23:59:59.000Z

356

Rate Schedule CV-SPR4  

NLE Websites -- All DOE Office Websites (Extended Search)

Any charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

357

Rate Schedule CV-SUR4  

NLE Websites -- All DOE Office Websites (Extended Search)

Any charges or credits associated with the creation, termination, or modification to any tariff, contract, or rate schedule accepted or approved by the Federal Energy Regulatory...

358

Corridor Rate Analysis Results - Energy Information Administration  

U.S. Energy Information Administration (EIA)

Energy Information Administration 113 ... with the pipeline company tariff rates obtained using the Federal Energy Regulatory Commission Automated System for Tariff

359

Optimization Online - Approximate Primal Solutions and Rate ...  

E-Print Network (OSTI)

Mar 29, 2007... limit as the number of subgradient iterations increases to infinity). Furthermore, no convergence rate results are known for these algorithms.

360

Method of controlling fusion reaction rates  

DOE Patents (OSTI)

This invention relates to a method of controlling the reaction rates in a nuclear fusion reactor; and more particularly, to the use of polarized nuclear fuel.

Kulsrud, R.M.; Furth, H.P.; Valeo, E.J.; Goldhaber, M.

1983-05-09T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Rate Schedule CV-TPT7  

NLE Websites -- All DOE Office Websites (Extended Search)

OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR TRANSMISSION OF WESTERN POWER BY OTHERS Effective: October 1, 2011, through September 30,...

362

Rate Schedule COTP-T3  

NLE Websites -- All DOE Office Websites (Extended Search)

COTP-T3 (Supersedes Schedule COTP-T2) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CALIFORNIA-OREGON TRANSMISSION PROJECT SCHEDULE OF RATE FOR...

363

PEPTIDE FOLDING RATES FROM SINGLE-MOLECULE ...  

Science Conference Proceedings (OSTI)

... A. Myers, Daniel A. Gacek, Eric M. Peterson, Christopher B. Fox, Joel M ... These microscopic rates are used to estimate the free energy barrier to ...

364

Investigation of formaldehyde and acetaldehyde sampling rate...  

NLE Websites -- All DOE Office Websites (Extended Search)

formaldehyde and acetaldehyde sampling rate and ozone interference for passive deployment of Waters Sep-Pak XPoSure samplers Title Investigation of formaldehyde and acetaldehyde...

365

ORNL DAAC, global soil respiration rates  

NLE Websites -- All DOE Office Websites (Extended Search)

W. Raich and W. H. Schlesinger, the newly released data set contains soil respiration rates from sites in terrestrial and wetland ecosystems as reported in scientific literature...

366

Photovoltaic Degradation Rates -- An Analytical Review  

DOE Green Energy (OSTI)

As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.

Jordan, D. C.; Kurtz, S. R.

2012-06-01T23:59:59.000Z

367

Rate Schedule CV-F13  

NLE Websites -- All DOE Office Websites (Extended Search)

FP customer allocation is equal to the annual PRR multiplied by the relevant FP percentage. The formula rate for FP power has three components. Component 1: FP Customer...

368

Definition: Facility Rating | Open Energy Information  

Open Energy Info (EERE)

any equipment comprising the facility.1 Related Terms reactive power, equipment rating, power, smart grid References Glossary of Terms Used in Reliability Standards An inl...

369

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS JUBATUS)  

E-Print Network (OSTI)

HEART RATE AS A MONITOR FOR METABOLIC RATE IN CAPTIVE JUVENILE STELLER SEA LIONS (EUMETOPIAS COLUMBIA 0Jan M. Mcl'hee, 2001 #12;ABSTRACT The potential use of heart rate to monitor energy expenditure a relationship exists between heart rate @I) and oxygen consumption ( ~ 0 ~ )in captive sea lions while swimming

370

University of California -Office of Loan Programs Historical STIP Quarterly Rate of Return for MOP Rate  

E-Print Network (OSTI)

University of California - Office of Loan Programs Historical STIP Quarterly Rate of Return for MOP - Office of Loan Programs Historical STIP Quarterly Rate of Return for MOP Rate Quarterly MOP Rate MOP.00% 03/31/86 7.987% 8.35% 8.35% (1) Calculated as the total STIP income earned for each period

Russell, Lynn

371

Richard Cantor Rating Transitions and Defaults Conditional on Watchlist, Outlook and Rating History Summary  

E-Print Network (OSTI)

This report documents global corporate credit rating transition and default rates during the 1995-2003 period conditional on the full information in Moody's published credit opinions, which, in addition to the current credit rating, include prior rating actions and current rating outlooks and reviews. The primary findings of this study are: Moodys rating system management practices attempt to limit rating reversals and dampen rating change volatility and, as a consequence, different issuers carrying the same rating may have different risks of rating migration and default. As noted in Moodys prior research dating back to 1993, recently downgraded issuers have a greater likelihood of future rating downgrades and default than do recently upgraded issuers. For example, obligors downgraded in the past twelve months are eight times more likely to be downgraded than upgraded in the next year. Downgraded issuers are eleven times more likely to default over one year than upgraded issuers. Moodys rating outlooks and reviews are used to signal the likely direction and timing of future rating actions and the evolution of default risk. For example, at a one-year time horizon, issuers with negative outlooks are seven times more likely to be downgraded than upgraded; issuers with positive outlooks are nearly twice as likely to be upgraded as downgraded; and issuers with stable outlooks have the highest probability of no rating change. Default rates within a given rating category also vary systematically by outlook status. For example,

unknown authors

2004-01-01T23:59:59.000Z

372

Weighted Time Warping for Temporal Segmentation of Multi-Parameter Physiological Signals  

E-Print Network (OSTI)

We present a novel approach to segmenting a quasiperiodic multi-parameter physiological signal in the presence of noise and transient corruption. We use Weighted Time Warping (WTW), to combine the partially correlated ...

Ganeshapillai, Gartheeban

373

Light-Weight, Single-Phase, Liquid-Cooled Cold Plate (Presentation)  

SciTech Connect

This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

Narumanchi, S.

2013-07-01T23:59:59.000Z

374

Light-Weight, Low-Cost, Single-Phase, Liquid-Cooled Cold Plate (Presentation)  

SciTech Connect

This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

Narumanchi, S.

2013-07-01T23:59:59.000Z

375

Ocean Interpolation by Four-Dimensional Weighted Least SquaresApplication to the Waters around Australasia  

Science Conference Proceedings (OSTI)

A new four-dimensional ocean interpolation system based on locally weighted least squares fitting is presented. A loess filter is used to interpolate irregularly spaced data onto a uniform grid. This involves projecting the data onto quadratic ...

K. R. Ridgway; J. R. Dunn; J. L. Wilkin

2002-09-01T23:59:59.000Z

376

A weighted profile intersection measure for profile-based authorship attribution  

Science Conference Proceedings (OSTI)

This paper introduces a new similarity measure called weighted profile intersection (WPI) for profile-based authorship attribution (PBAA). Authorship attribution (AA) is the task of determining which, from a set of candidate authors, wrote a given document. ...

Hugo Jair Escalante; Manuel Montes-y-Gmez; Thamar Solorio

2011-11-01T23:59:59.000Z

377

An Entropy Approach to Tuning Weights and Smoothing in the Generalized Inversion  

Science Conference Proceedings (OSTI)

Weak constraint data assimilation involves a certain number of weighting and smoothing parameters. The authors present an approach to estimate them based on maximizing the entropy. Because application of this rigorous scheme to large-dimensional ...

Gennady A. Kivman; Alexandre L. Kurapov; Alina V. Guessen

2001-02-01T23:59:59.000Z

378

Unifying weighting and case reduction methods based on rough sets to improve retrieval  

Science Conference Proceedings (OSTI)

Case-Based Reasoning systems usually retrieve cases using a similarity function based on K-NN or some derivatives. These functions are sensitive to irrelevant or noisy features. Weighting methods are used to extract the most important information ...

Maria Salam; Elisabet Golobardes

2003-06-01T23:59:59.000Z

379

Areally-Weighted Temperature and Precipitation Averages for Alaska, 19311977  

Science Conference Proceedings (OSTI)

Areally weighted time series of temperature and precipitation have been compiled for Alaska for the period 19311977. Correlations of the temperature values with those of the contiguous United States indicate that, at both the monthly and ...

Henry F. Diaz

1980-06-01T23:59:59.000Z

380

Simple Uncertainty Frameworks for Selecting Weighting Schemes and Interpreting Multimodel Ensemble Climate Change Experiments  

Science Conference Proceedings (OSTI)

Future climate change projections are often derived from ensembles of simulations from multiple global circulation models using heuristic weighting schemes. This study provides a more rigorous justification for this by introducing a nested family ...

Philip G. Sansom; David B. Stephenson; Christopher A. T. Ferro; Giuseppe Zappa; Len Shaffrey

2013-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

On the Weights for an Ensemble-Averaged 610-Day Forecast  

Science Conference Proceedings (OSTI)

A scheme to optimally weight the members of an ensemble of forecasts is discussed in the framework of calculating an as accurate as possible ensemble average. Results show, relative to a single member, a considerably improved 500-mb height ...

H. M. Van Den Dool; L. Rukhovets

1994-09-01T23:59:59.000Z

382

Musculoskeletal adaptation to Partial Weight Suspension : studies of Lunar and Mars loading  

E-Print Network (OSTI)

As human spaceflight extends in both duration and scope, it is critical to better understand the physiologic effects of this novel environment. In the weight bearing structures of the body, bone loss and muscle atrophy far ...

Wagner, Erika Brown

2007-01-01T23:59:59.000Z

383

Simulating the performance of a class-based weighted fair queueing system  

Science Conference Proceedings (OSTI)

Class Based Weighted Fair Queueing (CBWFQ) is a very important router discipline that allows different types of Internet Protocol (IP) traffic like voice, video, and best effort data to receive the required quality of service measures they individually ...

Martin J. Fischer; Denise M. Bevilacqua Masi; John F. Shortle

2008-12-01T23:59:59.000Z

384

Risk haplotype pattern discovery for gene mapping by recursive partitioning method based on weighted classification trees  

Science Conference Proceedings (OSTI)

In this paper, we present a combinatorial approach based on recursive weighted longest prefix trees (RWLPT) for mining a massive genetic marker data. Given a case and a control chromosome dataset, we develop a fast recursive permutation algorithm ... Keywords: combinatorial optimisation, disease susceptibility genes, gene mapping, genetic markers, haplotype clusters, haplotype-disease association, multilocus SNP analysis, non-numerical algorithms, recursive partitioning, risk haplotype pattern discovery, weighted classification trees

Tran Trang; Hoang Ngoc Minh

2010-02-01T23:59:59.000Z

385

An Analysis of Building Energy Code Statewide Adoption Rates by Local  

NLE Websites -- All DOE Office Websites (Extended Search)

An Analysis of Building Energy Code Statewide Adoption Rates by Local An Analysis of Building Energy Code Statewide Adoption Rates by Local Jurisdiction The purpose of this study is to quantify the energy code adoption rate by local jurisdictions from a sample set of 21 states. Some of the states within this sample have statewide energy codes, while others do not. Using construction starts and weighting results by localities that have or have not adopted energy codes, the findings can suggest a means of identifying which states have "effectively" adopted state-wide codes through local adoption and enforcement. Publication Date: Monday, December 31, 2012 BEC_Statewide_Adoption.pdf Document Details Last Name: Cort Initials: KA Affiliation: Pacific Northwest National Laboratory Document Number: PNNL-21963 Prepared by:

386

Video digest based on heart rate  

Science Conference Proceedings (OSTI)

In video digesting, not only features and keywords extracted from a content itself but viewer's input are essential to incorporate subjective impressions and perceived importance. The present study aims at providing heart rate based arousal level as ... Keywords: affect, emotion, heart rate, psychophysiology, video analysis, video digest

Satoshi Toyosawa; Takashi Kawai

2007-08-01T23:59:59.000Z

387

Switching rates of multi-step reactions  

E-Print Network (OSTI)

We consider a switching rate of a meta-stable reaction scheme, which includes reactions with arbitrary steps, e.g. $kA\\to(k+r)A$. Employing WKB approximation, controlled by a large system size, we evaluate both the exponent and the pre-exponential factor for the rate. The results are illustrated on a number of examples.

Escudero, Carlos

2008-01-01T23:59:59.000Z

388

Quasi-Dynamic Rating Pilot Projects  

Science Conference Proceedings (OSTI)

EPRI's DTCR technology, which encompasses a number of software tools, hardware tools, and methodologies, offers near-term solutions to overhead line rating problems. The Quasi-Dynamic Rating (QDR) concepts and tools developed in the 2004 pilot project are presented in this report.

2004-12-27T23:59:59.000Z

389

Method of controlling fusion reaction rates  

DOE Patents (OSTI)

A method of controlling the reaction rates of the fuel atoms in a fusion reactor comprises the step of polarizing the nuclei of the fuel atoms in a particular direction relative to the plasma confining magnetic field. Fusion reaction rates can be increased or decreased, and the direction of emission of the reaction products can be controlled, depending on the choice of polarization direction.

Kulsrud, Russell M. (Princeton, NJ); Furth, Harold P. (Princeton, NJ); Valeo, Ernest J. (Princeton Junction, NJ); Goldhaber, Maurice (Bayport, NY)

1988-01-01T23:59:59.000Z

390

Nuclear Reaction Rates and Carbon Star Formation  

E-Print Network (OSTI)

We have studied how the third dredge-up and the carbon star formation in low-mass Asymptotic Giant Branch stars depends on certain key nuclear reaction rates. We find from a set of complete stellar evolution calculations of a 2Msun model with Z=0.01 including mass loss, that varying either the N14(p,g)O15 or the 3-alpha reaction rate within their uncertainties as given in the NACRE compilation results in dredge-up and yields that differ by a factor of 2. Model tracks with a higher rate for the 3-alpha rate and a lower rate for the N14(p,g)O15 reaction both show more efficient third dredge-up. New experimental results for the N14(p,g)O15 reaction rates are surveyed, yielding a rate which is about 40% lower than the tabulated NACRE rate, and smaller than NACRE's lower limit. We discuss the possible implications of the revised nuclear reaction stellar evolution calculations that aim to reproduce the observed carbon star formation at low mass, which requires efficient third dredge-up.

Falk Herwig; Sam M. Austin

2004-08-21T23:59:59.000Z

391

Theoretical cosmic Type Ia supernova rates  

E-Print Network (OSTI)

The aim of this work is the computation of the cosmic Type Ia supernova rates at very high redshifts (z>2). We adopt various progenitor models in order to predict the number of explosions in different scenarios for galaxy formation and to check whether it is possible to select the best delay time distribution model, on the basis of the available observations of Type Ia supernovae. We also computed the Type Ia supernova rate in typical elliptical galaxies of different initial luminous masses and the total amount of iron produced by Type Ia supernovae in each case. It emerges that: it is not easy to select the best delay time distribution scenario from the observational data and this is because the cosmic star formation rate dominates over the distribution function of the delay times; the monolithic collapse scenario predicts an increasing trend of the SN Ia rate at high redshifts whereas the predicted rate in the hierarchical scheme drops dramatically at high redshift; for the elliptical galaxies we note that the predicted maximum of the Type Ia supernova rate depends on the initial galactic mass. The maximum occurs earlier (at about 0.3 Gyr) in the most massive ellipticals, as a consequence of downsizing in star formation. We find that different delay time distributions predict different relations between the Type Ia supernova rate per unit mass at the present time and the color of the parent galaxies and that bluer ellipticals present higher supernova Type Ia rates at the present time.

R. Valiante; F. Matteucci; S. Recchi; F. Calura

2008-07-15T23:59:59.000Z

392

Seedskadee Participating Project Power Sales Rate History  

NLE Websites -- All DOE Office Websites (Extended Search)

Power Sales Rate History Updated: 1022009 Rate Schedule Effective Dates Energy (MillskWh) Capacity (kW-mo.) Combined (MillskWh) R4-F1 thru 474 3.000 1.275 6.000 UC-F1 4...

393

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Features > Groups Content Group Activity By term Q & A Feeds Content type Blog entry Discussion Document Event Poll Question Keywords Author Apply Ewilson FYI, OpenEI now accommodates t... Posted by: Ewilson 20 Sep 2013 - 11:58 99thin Very useful information. Thank... Posted by: 99thin 9 Sep 2013 - 00:19 Rmckeel The utility rate database version 1 API is now deprecated Posted by: Rmckeel 6 Sep 2013 - 14:00 There comes a time in every API version's lifecycle when it needs to be deprecated. OpenEI's utility rate database version 1 API has been in use since the inception of the database in 2010. As... Tags: API, Utility Rates NickL Glad I could help get you on t... Posted by: NickL 4 Sep 2013 - 07:41 Glad I could help get you on the right track Myles. There is not as simple

394

International Rates | OpenEI Community  

Open Energy Info (EERE)

International Rates International Rates Home > Groups > Utility Rate Nsbowde's picture Submitted by Nsbowde(12) Member 10 July, 2012 - 11:27 Per the town hall discussion yestereday, I have a link to a tariff database assembled by the Energy Regulators Regional Association. There is no free access and reproduction of the information without ERRA consent is prohibited, but nonetheless here it is. I have some friends in ERRA, so maybe future collaboration could be possible. http://www.erranet.org/Products/TariffDatabase Nick Groups: Utility Rate Login to post comments Nsbowde's blog Comments Rmckeel Rmckeel1 year 26 weeks ago International rates Thanks for the info, Nick! On a side note, when we move our blog over to OpenEI communities, content like this blog entry will be more visible on

395

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: American Clean Skies Foundation Type Term Title Author Replies Last Post sort icon Blog entry American Clean Skies Foundation Nominations open for $250,000 Multimedia Clean Energy prizes Graham7781 2 Oct 2012 - 13:01 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman

396

Definition: Equipment Rating | Open Energy Information  

Open Energy Info (EERE)

Rating Rating Jump to: navigation, search Dictionary.png Equipment Rating The maximum and minimum voltage, current, frequency, real and reactive power flows on individual equipment under steady state, short-circuit and transient conditions, as permitted or assigned by the equipment owner.[1] Also Known As Standard current ratings Related Terms reactive power, smart grid References ↑ Glossary of Terms Used in Reliability Standards An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Equipment_Rating&oldid=502535" Categories: Definitions ISGAN Definitions What links here Related changes Special pages Printable version Permanent link Browse properties

397

OpenEI Community - Utility Rates  

Open Energy Info (EERE)

The utility rate The utility rate database version 1 API is now deprecated http://en.openei.org/community/blog/utility-rate-database-version-1-api-now-deprecated There comes a time in every API version's lifecycle when it needs to be deprecated.OpenEI's utility rate database version 1 API has been in use since the inception of the database in 2010.  As Illinois State University has taken a commanding lead of the project and its data curation, we have updated the schema and API to version 2 to present a richer spectrum of utility rate data.

398

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: challenge Type Term Title Author Replies Last Post sort icon Discussion challenge 2013 Civic Hacking Day Ideas Rmckeel 1 22 May 2013 - 08:23 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne

399

Method for Determining Solids Circulation Rate  

NLE Websites -- All DOE Office Websites (Extended Search)

Determining Solids Circulation Rate Determining Solids Circulation Rate Contact NETL Technology Transfer Group techtransfer@netl.doe.gov May 2012 Opportunity Research is currently active on the patented technology "Method for Determining Solids Circulation Rate." The technology is available for licensing and/or further collaborative research from the U.S. Department of Energy's National Energy Technology Laboratory. Overview This invention provides a method to measure the rate of solids circulation, particularly in those applications where the solids are recycled back to pro- cesses for further use. The applications include processes such as circulating fluidized bed gasifiers and combustors, as well as chemical looping. In the above applications, determining solids circulation rates is needed to

400

gas rates | OpenEI Community  

Open Energy Info (EERE)

gas rates gas rates Home > Groups > Utility Rate Are there Gas Utility Rates available in OpenEI? Submitted by Nlong on 11 July, 2012 - 11:41 1 answer Points: 1 Hi, OpenEI doesn't have NG utility rates as far as I'm aware. That may be a dataset that is added in the future. You can access natural gas prices by utility and sector by downloading the EIA-176 form from the Energy Information Administration. I've included some links to help you find your way. http://205.254.135.7/survey/form/eia_176/efs176.cfm http://www.eia.gov/oil_gas/natural_gas/applications/eia176query_historical.html -Sfomail Sfomail on 12 July, 2012 - 12:04 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge?

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Atomic multipole relaxation rates near surfaces  

E-Print Network (OSTI)

The spontaneous relaxation rates for an atom in free space and close to an absorbing surface are calculated to various orders of the electromagnetic multipole expansion. The spontaneous decay rates for dipole, quadrupole and octupole transitions are calculated in terms of their respective primitive electric multipole moments and the magnetic relaxation rate is calculated for the dipole and quadrupole transitions in terms of their respective primitive magnetic multipole moments. The theory of electromagnetic field quantization in magnetoelectric materials is used to derive general expressions for the decay rates in terms of the dyadic Green function. We focus on the decay rates in free space and near an infinite half space. For the decay of atoms near to an absorbing dielectric surface we find a hierarchy of scaling laws depending on the atom-surface distance z.

Crosse, J A

2009-01-01T23:59:59.000Z

402

Atomic multipole relaxation rates near surfaces  

E-Print Network (OSTI)

The spontaneous relaxation rates for an atom in free space and close to an absorbing surface are calculated to various orders of the electromagnetic multipole expansion. The spontaneous decay rates for dipole, quadrupole and octupole transitions are calculated in terms of their respective primitive electric multipole moments and the magnetic relaxation rate is calculated for the dipole and quadrupole transitions in terms of their respective primitive magnetic multipole moments. The theory of electromagnetic field quantization in magnetoelectric materials is used to derive general expressions for the decay rates in terms of the dyadic Green function. We focus on the decay rates in free space and near an infinite half space. For the decay of atoms near to an absorbing dielectric surface we find a hierarchy of scaling laws depending on the atom-surface distance z.

J. A. Crosse; Stefan Scheel

2009-01-20T23:59:59.000Z

403

Chaos regularization of quantum tunneling rates  

Science Conference Proceedings (OSTI)

Quantum tunneling rates through a barrier separating two-dimensional, symmetric, double-well potentials are shown to depend on the classical dynamics of the billiard trajectories in each well and, hence, on the shape of the wells. For shapes that lead to regular (integrable) classical dynamics the tunneling rates fluctuate greatly with eigenenergies of the states sometimes by over two orders of magnitude. Contrarily, shapes that lead to completely chaotic trajectories lead to tunneling rates whose fluctuations are greatly reduced, a phenomenon we call regularization of tunneling rates. We show that a random-plane-wave theory of tunneling accounts for the mean tunneling rates and the small fluctuation variances for the chaotic systems.

Pecora, Louis M.; Wu Dongho [Materials Physics and Sensors, US Naval Research Laboratory, Washington, DC 20375 (United States); Lee, Hoshik [Department of Physics, College of William and Mary, Williamsburg, Virginia 23187 (United States); Antonsen, Thomas; Lee, Ming-Jer; Ott, Edward [Physics and Electrical Engineering Departments, University of Maryland, College Park, Maryland 20742 (United States)

2011-06-15T23:59:59.000Z

404

Home Energy Ratings and Building Performance  

E-Print Network (OSTI)

This paper provides an overview of the Home Energy Rating System (HERS). A short summary of the origination and history of the HERS system will lead to a more detailed description of the inspection and testing protocol. The HERS rating provides an accepted method to determine home efficiency based on standards developed and overseen by the Residential Energy Services Network (RESNET), a not-for-profit corporation. The paper will discuss the effect of various building systems and effects of local climate as they affect the rating score of a proposed or completed structure. The rating is used to determine the most cost effective mechanical systems, building envelope design including window and door types, effect of various roofing materials and radiant barriers. The paper will conclude by comparing specifics of an actual report to the construction characteristics of a home as they relate to the HERS Rating and the result.

Gardner, J.C.

2008-12-01T23:59:59.000Z

405

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: data Type Term Title Author Replies Last Post sort icon Blog entry data Commercial and Residential Hourly Load Data Now Available on OpenEI! Sfomail 17 May 2013 - 12:03 Blog entry data IRENA launches global atlas of renewable energy potential Graham7781 11 Feb 2013 - 15:18 Groups Menu You must login in order to post into this group. Recent content FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated Glad I could help get you on t... Nick, Thanks very much! That... more Group members (25) Managers: Dloomis Rmckeel Sfomail Recent members: Denizurla Bazouing Gdavis

406

Merger Rates of Dark-Matter Haloes  

E-Print Network (OSTI)

We derive analytic merger rates for dark-matter haloes within the framework of the Extended Press-Schechter (EPS) formalism. These rates become self-consistent within EPS once we realize that the typical merger in the limit of a small time-step involves more than two progenitors, contrary to the assumption of binary mergers adopted in earlier studies. We present a general method for computing merger rates that span the range of solutions permitted by the EPS conditional mass function, and focus on a specific solution that attempts to match the merger rates in N-body simulations. The corrected EPS merger rates are more accurate than the earlier estimates of Lacey & Cole, by ~20% for major mergers and by up to a factor of ~3 for minor mergers of mass ratio 1:10^4. Based on the revised merger rates, we provide a new algorithm for constructing Monte-Carlo EPS merger trees, that could be useful in Semi-Analytic Modeling. We provide analytic expressions and plot numerical results for several quantities that are very useful in studies of galaxy formation. This includes (a) the rate of mergers of a given mass ratio per given final halo, (b) the fraction of mass added by mergers to a halo, and (c) the rate of mergers per given main progenitor. The creation and destruction rates of haloes serve for a self-consistency check. Our method for computing merger rates can be applied to conditional mass functions beyond EPS, such as those obtained by the ellipsoidal collapse model or extracted from $N$-body simulations.

Eyal Neistein; Avishai Dekel

2008-02-04T23:59:59.000Z

407

Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S.  

E-Print Network (OSTI)

Vehicle weight reduction is a known strategy to address growing concerns about greenhouse gas emissions and fuel use by passenger vehicles. We find that every 10% reduction in vehicle weight can cut fuel consumption by ...

Cheah, Lynette W. (Lynette Wan Ting)

2010-01-01T23:59:59.000Z

408

On the Effectiveness of Rate Limiting Mechanisms  

E-Print Network (OSTI)

One class of worm defense techniques that received attention of late is to rate limit outbound traffic to contain fast spreading worms. Several proposals of rate limiting techniques have appeared in the literature, each with a different take on the impetus behind rate limiting. This paper presents an empirical analysis on different rate limiting schemes using real traffic and attack traces from a sizable network. In the analysis we isolate and investigate the impact of the critical parameters for each scheme and seek to understand how these parameters might be set in realistic network settings. Analysis shows that using DNS-based rate limiting has substantially lower error rates than schemes based on other traffic statistics. The empirical analysis additionally brings to light a number of issues with respect to rate limiting in practice. We explore the impact of these issues in the context of general worm containment. Acknowledgments: We thank the members and companies of the PDL Consortium for their support. This work was partially supported by the National Science Foundation under Grant No. CNS-0433540 and ANI-0326472.

Cynthia Wong; Stan Bielski; Ahren Studer; Chenxi Wang

2005-01-01T23:59:59.000Z

409

What Is the New Normal Unemployment Rate?  

E-Print Network (OSTI)

Recent labor markets developments, including mismatches in the skills of workers and jobs, extended unemployment benefits, and very high rates of long-term joblessness, may be impeding the return to normal unemployment rates of around 5%. An examination of alternative measures of labor market conditions suggests that the normal unemployment rate may have risen as much as 1.7 percentage points to about 6.7%, although much of this increase is likely to prove temporary. Even with such an increase, sizable labor market slack is expected to persist for years. In the past, the U.S. labor market has proven to be very flexible and recessions have not usually been followed by long-lasting increases in the unemployment rate. But, in the wake of the most recent recession, many economists are concerned that developments such as mismatches in the skills of workers and jobs, extended unemployment benefits, and a rise in long-term joblessness may have raised the normal or natural rate of unemployment above the 5 % level that was thought to be typical before the downturn. Indeed, a few economists have gone so far as to argue that the rise in the unemployment rate to its current level of 9 % primarily reflects an increase in the natural rate, implying there is little slack in labor markets and therefore little downward pressure on inflation. This Economic Letter

Weidner; John C. Williams

2011-01-01T23:59:59.000Z

410

Impact of the Revised 10 CFR 835 on the Neutron Dose Rates at LLNL  

SciTech Connect

In June 2007, 10 CFR 835 [1] was revised to include new radiation weighting factors for neutrons, updated dosimetric models, and dose terms consistent with the newer ICRP recommendations. A significant aspect of the revised 10 CFR 835 is the adoption of the recommendations outlined in ICRP-60 [2]. The recommended new quantities demand a review of much of the basic data used in protection against exposure to sources of ionizing radiation. The International Commission on Radiation Units and Measurements has defined a number of quantities for use in personnel and area monitoring [3,4,5] including the ambient dose equivalent H*(d) to be used for area monitoring and instrument calibrations. These quantities are used in ICRP-60 and ICRP-74. This report deals only with the changes in the ambient dose equivalent and ambient dose rate equivalent for neutrons as a result of the implementation of the revised 10 CFR 835. In the report, the terms neutron dose and neutron dose rate will be used for convenience for ambient neutron dose and ambient neutron dose rate unless otherwise stated. This report provides a qualitative and quantitative estimate of how much the neutron dose rates at LLNL will change with the implementation of the revised 10 CFR 835. Neutron spectra and dose rates from selected locations at the LLNL were measured with a high resolution spectroscopic neutron dose rate system (ROSPEC) as well as with a standard neutron rem meter (a.k.a., a remball). The spectra obtained at these locations compare well with the spectra from the Radiation Calibration Laboratory's (RCL) bare californium source that is currently used to calibrate neutron dose rate instruments. The measurements obtained from the high resolution neutron spectrometer and dose meter ROSPEC and the NRD dose meter compare within the range of {+-}25%. When the new radiation weighting factors are adopted with the implementation of the revised 10 CFR 835, the measured dose rates will increase by up to 22%. The health physicists should consider this increase for any areas that have dose rates near a posting limit, such as near the 100 mrem/hr for a high radiation area, as this increase in measured dose rate may result in some changes to postings and consequent radiological controls.

Radev, R

2009-01-13T23:59:59.000Z

411

Nodal weighting factor method for ex-core fast neutron fluence evaluation  

SciTech Connect

The nodal weighting factor method is developed for evaluating ex-core fast neutron flux in a nuclear reactor by utilizing adjoint neutron flux, a fictitious unit detector cross section for neutron energy above 1 or 0.1 MeV, the unit fission source, and relative assembly nodal powers. The method determines each nodal weighting factor for ex-core neutron fast flux evaluation by solving the steady-state adjoint neutron transport equation with a fictitious unit detector cross section for neutron energy above 1 or 0.1 MeV as the adjoint source, by integrating the unit fission source with a typical fission spectrum to the solved adjoint flux over all energies, all angles and given nodal volume, and by dividing it with the sum of all nodal weighting factors, which is a normalization factor. Then, the fast neutron flux can be obtained by summing the various relative nodal powers times the corresponding nodal weighting factors of the adjacent significantly contributed peripheral assembly nodes and times a proper fast neutron attenuation coefficient over an operating period. A generic set of nodal weighting factors can be used to evaluate neutron fluence at the same location for similar core design and fuel cycles, but the set of nodal weighting factors needs to be re-calibrated for a transition-fuel-cycle. This newly developed nodal weighting factor method should be a useful and simplified tool for evaluating fast neutron fluence at selected locations of interest in ex-core components of contemporary nuclear power reactors. (authors)

Chiang, R. T. [AREVA NP Inc., 6399 San Ignacio Ave., San Jose, CA 95119 (United States)

2012-07-01T23:59:59.000Z

412

Rate Schedule CV-RFS4  

NLE Websites -- All DOE Office Websites (Extended Search)

RFS4 RFS4 (Supersedes Schedule CV-RFS3) UNITED STATES DEPARTMENT OF ENERGY WESTERN AREA POWER ADMINISTRATION CENTRAL VALLEY PROJECT SCHEDULE OF RATE FOR REGULATION AND FREQUENCY RESPONSE SERVICE Effective: October 1, 2011, through September 30, 2016. Available: Within the marketing area served by the Western Area Power Administration (Western), Sierra Nevada Customer Service Region. Applicable: To customers receiving Regulation and Frequency Response Service (regulation). Character and Conditions of Service: Regulation is necessary to provide for the continuous balancing of resources and interchange with load and for maintaining scheduled interconnection frequency at 60-cycles per second. Formula Rate: The formula rate for regulation includes three components:

413

Considerations for How to Rate CPV  

DOE Green Energy (OSTI)

The concentrator photovoltaic (CPV) industry is introducing multiple products into the marketplace, but, as yet, the; community has not embraced a unified method for assessing a nameplate rating. The choices of whether to use 850,; 900, or 1000 W/m2 for the direct-normal irradiance and whether to link the rating to ambient or cell temperature will; affect how CPV modules are rated and compared with other technologies. This paper explores the qualitative and; quantitative ramifications of these choices using data from two multi-junction CPV modules and two flat-plate; modules.

Kurtz, S.; Miller, M.; Marion, B.; Emery, K.; McConnell, R.; Surendran, S.; Kimber, A.

2011-02-01T23:59:59.000Z

414

Measuring Degradation Rates Without Irradiance Data  

DOE Green Energy (OSTI)

A method to report PV system degradation rates without using irradiance data is demonstrated. First, a set of relative degradation rates are determined by comparing daily AC final yields from a group of PV systems relative to the average final yield of all the PV systems. Then, the difference between relative and absolute degradation rates is found from a statistical analysis. This approach is verified by comparing to methods that utilize irradiance data. This approach is significant because PV systems are often deployed without irradiance sensors, so the analysis method described here may enable measurements of degradation using data that were previously thought to be unsuitable for degradation studies.

Pulver, S.; Cormode, D.; Cronin, A.; Jordan, D.; Kurtz, S.; Smith, R.

2011-02-01T23:59:59.000Z

415

Data Fusion for Improved Respiration Rate Estimation  

E-Print Network (OSTI)

We present an application of a modified Kalman-Filter (KF) framework for data fusion to the estimation of respiratory rate from multiple physiological sources which is robust to background noise. A novel index of the ...

Nemati, Shamim

416

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term Content Group Activity By term Q & A Feeds American Clean Skies Foundation (1) API (3) Apps (1) bug (1) building load (1) building load data (1) challenge (1) clean energy (1) commercial load (1) data (2) dataset (1) datasets (1) developer (5) DOE (1) EIA (1) electric load data (1) energy efficiency (1) Energy Visions Prize (1) EZFeed (1) FOA (1) funding (1) Global Atlas (1) hackathon (1) Illinois State University (1) Incentives and Policies (1) 1 2 3 next › last » Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated

417

On-site Housing Rates | Staff Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Rates Rates Effective February 1, 2013 Rates for Occupancy < 30-Days Guest House* Single/Double: US $105.00/day Housekeeping service is provided on all working days. *Alternatives to the Guest House - When family-type accommodations are assigned to temporary or transient personnel, Guest House rates as set forth above will apply. The total will not exceed one months' rent for a unit occupied for 30 days or less. When such assignment is necessary due to lack of adequate Guest House accommodations, housekeeping service is provided on working days; for reservations staying seven days or less. Residence Houses Curie House: US $42.00/day Cavendish House: US $42.00/day Compton House: US $42.00/day Housekeeping service for all residence houses are provided three times per

418

Definition: Rated power | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Rated power Jump to: navigation, search Dictionary.png Rated power The power output of a device under specific or nominal operating conditions[1] View on Wikipedia Wikipedia Definition In electrical and electronic engineering, the power rating of a device is a guideline set by the manufacturer as a maximum power to be used with that device. This limit is usually set somewhat lower than the level where the device will be damaged, to allow a margin of safety. In devices which primarily dissipate electric power or convert it into mechanical power, such as resistors, electric motors, and speakers, the power rating given is usually the maximum power that can be safely dissipated by the

419

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Groups > Groups > Utility Rate Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You must login in order to post into this group. Groups Menu You must login in order to post into this group. Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne Nlong Wzeng Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail

420

NREL: Photovoltaics Research - Photovoltaic Energy Ratings Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

Photovoltaic Energy Ratings Methods Validation Photovoltaic Energy Ratings Methods Validation The Photovoltaic (PV) Engineering group at NREL validates energy ratings methods by standards committees to establish an energy rating methodology. We are evaluating techniques to account for the impact on PV performance from variations in the spectral distribution of solar radiation. Two types of methods were evaluated for correcting the short-circuit current of PV modules for variations in the solar spectrum under clear skies: (1) empirical relationships based on air mass, and (2) use of spectral irradiance models and PV module spectral response data. Methods of the first type were the Sandia National Laboratories absolute air-mass function, or f(AMa), and the CREST air-mass function, or f(AM). The second

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Historical river flow rates for dose calculations  

Science Conference Proceedings (OSTI)

Annual average river flow rates are required input to the LADTAP Computer Code for calculating offsite doses from liquid releases of radioactive materials to the Savannah River. The source of information on annual river flow rates used in dose calculations varies, depending on whether calculations are for retrospective releases or prospective releases. Examples of these types of releases are: Retrospective - releases from routine operations (annual environmental reports) and short term release incidents that have occurred. Prospective - releases that might be expected in the future from routine or abnormal operation of existing or new facilities (EIS`s, EID`S, SAR`S, etc.). This memorandum provides historical flow rates at the downstream gauging station at Highway 301 for use in retrospective dose calculations and derives flow rate data for the Beaufort-Jasper and Port Wentworth water treatment plants.

Carlton, W.H.

1991-06-10T23:59:59.000Z

422

Essays on exchange rates and electricity demand  

E-Print Network (OSTI)

This thesis examines two important issues in economic development: exchange rates and electricity demand and addresses methodological issues of using time series and panel data analysis to investigate important policy ...

Li, Xiangming, 1966-

1999-01-01T23:59:59.000Z

423

Can Anthropogenic Aerosols Decrease the Snowfall Rate?  

Science Conference Proceedings (OSTI)

Observations by Borys, Lowenthal, Cohn, and Brown in midlatitude orographic clouds show that for a given supercooled liquid water content, both the riming and the snowfall rates are smaller if the supercooled cloud has more cloud droplets as, for ...

U. Lohmann

2004-10-01T23:59:59.000Z

424

Rating the energy performance of buildings  

SciTech Connect

In order to succeed in developing a more sustainable society, buildings will need to be continuously improved. This paper discusses how to rate the energy performance of buildings. A brief review of recent approaches to energy rating is presented. It illustrates that there is no single correct or wrong concept, but one needs to be aware of the relative impact of the strategies. Different strategies of setting energy efficiency standards are discussed and the advantages of the minimum life cycle cost are shown. Indicators for building energy rating based on simulations, aggregated statistics and expert knowledge are discussed and illustrated in order to demonstrate strengths and weaknesses of each approach. In addition, the importance of considering the level of amenities offered is presented. Attributes of a rating procedure based on three elements, flexible enough for recognizing different strategies to achieve energy conservation, is proposed.

Olofsson, Thomas; Meier, Alan; Lamberts, Roberto

2004-12-01T23:59:59.000Z

425

The legal case against standby rates  

Science Conference Proceedings (OSTI)

Under rates approved by many state commissions, on-site investments are blocked and/or dis-incentivized by policies that place the interest of utility shareholders before the interests of the public. (author)

Casten, Sean; Karegianes, Myra

2007-11-15T23:59:59.000Z

426

The Estimation of Snowfall Rate Using Visibility  

Science Conference Proceedings (OSTI)

The relationship between liquid equivalent snowfall rate and visibility is investigated using data collected at the National Center for Atmospheric Research Marshall Snowfall Test Site during two winter field seasons and using theoretical ...

Roy M. Rasmussen; Jothiram Vivekanandan; Jeffrey Cole; Barry Myers; Charles Masters

1999-10-01T23:59:59.000Z

427

Empirically Evaluating Divergence Rates of Atmospheric Trajectories  

Science Conference Proceedings (OSTI)

Observed Northern Hemisphere divergence rates of phase-space trajectories initially emanating from neighboring points are estimated, using a simple, seasonal, weakly GCM-dependent linear method applied to Ertel potential vorticity on the 315-K ...

Gidon Eshel

2006-02-01T23:59:59.000Z

428

Can Paleoceanographic Tracers Constrain Meridional Circulation Rates?  

Science Conference Proceedings (OSTI)

The ability of paleoceanographic tracers to constrain rates of transport is examined using an inverse method to combine idealized observations with a geostrophic model. Considered are the spatial distribution, accuracy, and types of tracers ...

Peter Huybers; Geoffrey Gebbie; Olivier Marchal

2007-02-01T23:59:59.000Z

429

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: energy efficiency Type Term Title Author Replies Last Post sort icon Blog entry energy efficiency FOA aimed at growing expansive database of Renewable Energy and Energy Efficiency Incentives and Policies Graham7781 12 Dec 2012 - 11:30 Groups Menu You must login in order to post into this group. Recent content FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated Glad I could help get you on t... Nick, Thanks very much! That... more Group members (25) Managers: Dloomis Rmckeel Sfomail Recent members: Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion

430

Utility Rate Discount | Open Energy Information  

Open Energy Info (EERE)

Discount Discount Jump to: navigation, search A few electric utilities offer rate discounts to encourage residential energy efficiency. For homes that meet certain energy efficiency criteria, such as those established by the federal Energy Star program, the owner or tenant is awarded a percentage discount on each month’s electric bill. [1] Utility Rate Discount Incentives CSV (rows 1 - 14) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Cleco Power - Power Miser New Home Program (Louisiana) Utility Rate Discount Louisiana Residential Building Insulation Central Air conditioners Clothes Washers Comprehensive Measures/Whole Building Doors Duct/Air sealing Furnaces Heat pumps Water Heaters Windows Yes Dominion North Carolina Power - Energy Saver Home Plus (North Carolina) Utility Rate Discount North Carolina Residential Water Heaters

431

Commercial Building Energy Asset Rating Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

BUILDING BUILDING ENERGY ASSET RATING WORKSHOP December 8-9, 2011 Washington, D.C. Nora Wang (Pacific Northwest National Laboratory) Will Gorrissen (Pacific Northwest National Laboratory) Molly McCabe (Hayden Tanner, LLC) Cody Taylor (Department of Energy) 1 I Asset Rating D.C. Workshop eere.energy.gov PRE-DECISIONAL Information included in this document is for discussion purposes and does not constitute the final program design. FOR INFORMATION ONLY 2 I Asset Rating D.C. Workshop eere.energy.gov Program Goals * Facilitate cost-effective investment in energy efficiency and reduce energy use in the commercial building sector * Establish a national standard for voluntary commercial building asset rating * Create a tool to help building owners identify and implement

432

Rating of Solar Energy Devices (Texas)  

Energy.gov (U.S. Department of Energy (DOE))

The Public Utility Commission has regulatory authority over solar energy devices installed and used in the state of Texas. The Commission can choose to adopt standards pertaining to the rating of...

433

Calibration and Rating of Photovoltaics: Preprint  

SciTech Connect

Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

Emery, K.

2012-06-01T23:59:59.000Z

434

DWPF Macrobatch 2 Melt Rate Tests  

SciTech Connect

The Defense Waste Processing Facility (DWPF) canister production rate must be increased to meet canister production goals. Although a number of factors exist that could potentially increase melt rate, this study focused on two: (1) changes in frit composition and (2) changes to the feed preparation process to alter the redox of the melter feed. These two factors were investigated for Macrobatch 2 (sludge batch 1B) utilizing crucible studies and a specially designed ''melt rate'' furnace. Other potential factors that could increase melt rate include: mechanical mixing via stirring or the use of bubblers, changing the power skewing to redistribute the power input to the melter, and elimination of heat loss (e.g. air in leakage). The melt rate testing in FY00 demonstrated that melt rate can be improved by adding a different frit or producing a much more reducing glass by the addition of sugar as a reductant. The frit that melted the fastest in the melt rate testing was Frit 165. A paper stud y was performed using the Product Composition Control System (PCCS) to determine the impact on predicted glass viscosity, liquidus, durability, and operating window if the frit was changed from Frit 200 to Frit 165. PCCS indicated that the window was very similar for both frits. In addition, the predicted viscosity of the frit 165 glass was 46 poise versus 84 poise for the Frit 200 glass. As a result, a change from Frit 200 to Frit 165 is expected to increase the melt rate in DWPF without decreasing waste loading.

Stone, M.E.

2001-01-03T23:59:59.000Z

435

Changes in heart rate variability during fainting  

Science Conference Proceedings (OSTI)

Studies of heart rate variability in people who faint may yield insights into normal physiologic mechanisms which probably are dynamic. These insights might be gained because fainting appears to be due to a breakdown of these mechanisms. Tilt table testing reliably induces fainting in patients with a history of fainting and can be used to study these mechanisms. During tilt tests ending in fainting heart rate changes markedly

Robert Sheldon; Kenneth Riff

1991-01-01T23:59:59.000Z

436

Radiation Leukemogenesis at Low Dose Rates  

SciTech Connect

The major goals of this program were to study the efficacy of low dose rate radiation exposures for the induction of acute myeloid leukemia (AML) and to characterize the leukemias that are caused by radiation exposures at low dose rate. An irradiator facility was designed and constructed that allows large numbers of mice to be irradiated at low dose rates for protracted periods (up to their life span). To the best of our knowledge this facility is unique in the US and it was subsequently used to study radioprotectors being developed for radiological defense (PLoS One. 7(3), e33044, 2012) and is currently being used to study the role of genetic background in susceptibility to radiation-induced lung cancer. One result of the irradiation was expected; low dose rate exposures are ineffective in inducing AML. However, another result was completely unexpected; the irradiated mice had a very high incidence of hepatocellular carcinoma (HCC), approximately 50%. It was unexpected because acute exposures are ineffective in increasing HCC incidence above background. This is a potential important finding for setting exposure limits because it supports the concept of an ?inverse dose rate effect? for some tumor types. That is, for the development of some tumor types low dose rate exposures carry greater risks than acute exposures.

Weil, Michael; Ullrich, Robert

2013-09-25T23:59:59.000Z

437

Short GRBs: Rates and luminosity function implications  

E-Print Network (OSTI)

We compare the luminosity function and rate inferred from the BATSE short hard bursts (SHBs) peak flux distribution with the redshift and luminosity distributions of SHBs observed by Swift/HETE II. The Swift/HETE II SHB sample is incompatible with SHB population that follows the star formation rate. However, it is compatible with a distribution of delay times after the SFR. This would be the case if SHBs are associated with the mergers of double neutron star (DNS) systems. DNS may be ``primordial'' or can form dynamically by binary exchange interaction in globular clusters during core collapse. The implied SHB rates that we find range from \\sim 8 to \\sim 30h_(70)^3 Gpc^(-3)yr^(-1). This rate is a much higher than what was previously estimated and, when beaming is taken into account, it is comparable to the rate of neutron star mergers estimated from statistics of binary pulsars. If GRBs are produced in mergers the implied rate practically guarantees detection by LIGO II and possibly even by LIGO I.

Dafne Guetta

2006-10-13T23:59:59.000Z

438

,"Sulfur Content, Weighted Average Refinery Crude Oil Input Qualities"  

U.S. Energy Information Administration (EIA) Indexed Site

Sulfur Content, Weighted Average Refinery Crude Oil Input Qualities" Sulfur Content, Weighted Average Refinery Crude Oil Input Qualities" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description","# Of Series","Frequency","Latest Data for" ,"Data 1","Sulfur Content, Weighted Average Refinery Crude Oil Input Qualities",16,"Monthly","9/2013","1/15/1985" ,"Release Date:","11/27/2013" ,"Next Release Date:","Last Week of December 2013" ,"Excel File Name:","pet_pnp_crq_a_epc0_ycs_pct_m.xls" ,"Available from Web Page:","http://www.eia.gov/dnav/pet/pet_pnp_crq_a_epc0_ycs_pct_m.htm" ,"Source:","Energy Information Administration"

439

The application of taylor weighting, digital phase shifters, and digital attenuators to phased-array antennas.  

SciTech Connect

Application of Taylor weighting (taper) to an antenna aperture can achieve low peak sidelobes, but combining the Taylor weighting with quantized attenuators and phase shifters at each radiating element will impact the performance of a phased-array antenna. An examination of array performance is undertaken from the simple point of view of the characteristics of the array factor. Design rules and guidelines for determining the Taylor-weighting parameters, the number of bits required for the digital phase shifter, and the dynamic range and number of bits required for the digital attenuator are developed. For a radar application, when each element is fed directly from a transmit/receive module, the total power radiated by the array will be reduced as a result of the taper. Consequently, the issue of whether to apply the taper on both transmit and receive configurations, or only on the receive configuration is examined with respect to two-way sidelobe performance.

Brock, Billy C.

2008-03-01T23:59:59.000Z

440

Hydrogen Generation Rate Scoping Study of DOW Corning Antifoam Agent  

DOE Green Energy (OSTI)

The antifoam agent DOW Corning Q2-3183A will be added to waste streams in the Hanford River Protection Program-Waste Treatment and Immobilization Plant (RPP-WTP) to prevent foaming. It consists mostly of polydimethylsiloxane (PDMS) and polypropylene glycol (PPG). These and other minor constituents of the antifoam have organic constituents that may participate in radiolytic and chemical reactions that produce hydrogen in Hanford waste. It has been recommended by The WTP R&T Department recommended personnel to treat the organic compounds of the antifoam like the in a similar manner as other organic compounds that are native to the Hanford waste with respect to hydrogen production. This testing has investigated the radiolytic and thermal production of hydrogen from antifoam added to simulant waste solutions to determine if the organic components of the antifoam produce hydrogen in the same manner as the native organic species in Hanford waste. Antifoam additions for this testing were in the range of 4 to 10 wt% to ensure adequate hydrogen detection. Test conditions were selected to bound exposures to the antifoam agent in the WTP. These levels are higher than previously recommended values of 350 mg/L for actual applications in WTP tanks containing air spargers and pulse jet mixers. Limited degradation analyses for the organic components of the antifoam were investigated in this study. A more detailed study involving analyses of antifoam degradation and product formation is in progress at SRNL and results from that study will be reported at a later time. The total organic carbon (TOC) content of the Q2-3183A antifoam was measured to be 39.7 {+-} 4.9 wt% TOC. This measurement was performed in triplicate with on three different dilutions of the pure antifoam liquid using a TOC combustion analyzer instrument with catalytic oxidation, followed by CO{sub 2} quantification using an infrared detector. Test results from this study indicate that the WTP HGR correlation conservatively bounds hydrogen generation rates (HGRs) from antifoam-containing simulants if the antifoam organic components are treated the same as other native organics. Tests that used the combination of radiolysis and thermolysis conducted on simulants containing antifoam produced measured hydrogen that was bounded by the WTP correlation. These tests used the bounding WTP temperature of 90 C and a dose rate of 1.8 x 10{sup 5} rad/hr. This dose rate is about ten times higher than the dose rate equivalent calculated for a bounding Hanford sludge slurry composition of 10 Ci/L, or 2 x 10{sup 4} rad/hr. Hydrogen was measured using a quadrupole mass spectroscopy instrument. Based on the analyses from the 4wt% and 10wt% antifoam samples, it is expected that the HGR results are directly proportional to the antifoam concentration added. A native organic-containing simulant that did not contain any added antifoam also produced a measurable radiolytic/thermal hydrogen rates that was in bounded by the WTP correlation. A base simulant with no added organic produced a measurable radiolytic/thermal HGR that was {approx}2X higher than the predicted HGR. Analysis of antifoam-containing simulants after prolonged irradiation of 52 Mrad and heating (23 days at 90 C) indicates that essentially all of the PDMS and greater than 60% of the PPG components are degraded, likely to lower molecular weight species. The antifoam components were analyzed by extraction from the salt simulants, followed by gel permeation chromatography (GPC) by personnel at Dow Corning. A more detailed study of the antifoam degradation and product formation from radiolysis and thermolysis is currently in progress at SRNL. That study uses a dose rate of about 2 x 10{sup 4} rad/hr and bounding temperatures of 90 C. Results from that study will be reported in a future report.

Crawford, Charles

2005-09-27T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Achievable Rate and Optimal Physical Layer Rate Allocation in Interference-Free Wireless Networks  

E-Print Network (OSTI)

We analyze the achievable rate in interference-free wireless networks with physical layer fading channels and orthogonal multiple access. As a starting point, the point-to-point channel is considered. We find the optimal physical and network layer rate trade-off which maximizes the achievable overall rate for both a fixed rate transmission scheme and an improved scheme based on multiple virtual users and superposition coding. These initial results are extended to the network setting, where, based on a cut-set formulation, the achievable rate at each node and its upper bound are derived. We propose a distributed optimization algorithm which allows to jointly determine the maximum achievable rate, the optimal physical layer rates on each network link, and an opportunistic back-pressure-type routing strategy on the network layer. This inherently justifies the layered architecture in existing wireless networks. Finally, we show that the proposed layered optimization approach can achieve almost all of the ergodic ...

Cui, Tao; Kliewer, Joerg

2009-01-01T23:59:59.000Z

442

Moment preserving adaptive particle weights using octree velocity distributions for PIC simulations  

SciTech Connect

The ratio of computational to physical particles is of primary concern to statistical particle based simulations such as DSMC and PIC. An adaptive computational particle weight algorithm is presented that conserves mass, momentum, and energy. This algorithm is then enhanced with an octree adaptive mesh in velocity space to mitigate artificial thermalization. The new octree merge is compared to a merge that randomly selects merge partners for a bi-Maxwellian velocity distribution. Results for crossing beams in a fixed potential well along with an electrostatic PIC version with and without MCC collisions based ionizing breakdown show the advantages of the merge algorithm to both fixed particle weights and randomly selected merge partners.

Martin, Robert Scott; Cambier, Jean-Luc [ERC Inc. (United States); Spacecraft Propulsion Branch, Air Force Research Laboratory, Edwards AFB, CA 93524 (United States)

2012-11-27T23:59:59.000Z

443

Low molecular weight thermostable .beta.-D-glucosidase from acidothermus cellulolyticus  

DOE Patents (OSTI)

A purified low molecular weight .beta.-D-glucosidase is produced from Acidothermus cellulolyticus ATCC 43068. The enzyme is water soluble, possesses activity against pNP-.beta.-D-glucopyranoside, has a high of degree of stability toward heat, exhibits optimal temperature activity at about 65.degree. C. at a pH range of from about 2 to about 7, has an inactivation temperature of about 80.degree. C. at a pH range of from about 2 to about 7 and has a molecular weight of about 50.5-54.5 kD as determineded by SDS-PAGE.

Himmel, Michael E. (Littleton, CO); Tucker, Melvin P. (Lakewood, CO); Adney, William S. (Golden, CO); Nieves, Rafael A. (Lakewood, CO)

1995-01-01T23:59:59.000Z

444

Labor Market Frictions, Interest Rates, and Macroeconomic Policies  

E-Print Network (OSTI)

endogenous separation rate increases, that is the ?ow intoinduces higher real interest rate, increases the demand forendogenous separation rate increases. We assume match-speci?

Zhang, Ji

445

Relating Vehicle-Wildlife Crash Rates to Roadway Improvements  

E-Print Network (OSTI)

animal-vehicle crash rates experienced increases followingif the crash rates has a significant increase or decrease inshowed an increase in animal-vehicle crash rates, although

Young, Rhonda; Giessen, Steven Vander; Vokurka, Christopher Steven

2007-01-01T23:59:59.000Z

446

Transmission Rate in Partial Differential Equation in Epidemic Models.  

E-Print Network (OSTI)

??The rate at which susceptible individuals become infected is called the transmission rate. It is important to know this rate in order to study the (more)

Elkadry, Alaa

2013-01-01T23:59:59.000Z

447

Size structuring of planktonic communities : biological rates and ecosystem dynamics  

E-Print Network (OSTI)

measuring growth and mortality rates among Prochlorococcustemperature on metabolic rate. Science 293:2248-2251. Gregg,and temperature on metabolic rate. Science. 293:2248-2251.

Taniguchi, Darcy Anne Akiko

2013-01-01T23:59:59.000Z

448

Sustainability, Limited Substitutability and Non-Constant Social Discount Rates  

E-Print Network (OSTI)

and Non-constant Social Discount Rates ? int strict weaktal preservation, and the rate of discount, Quarterlyhorizon and the discount rate, Journal of Economic Theory

Traeger, Christian P.

2008-01-01T23:59:59.000Z

449

Freely Floating Exchange Rates Do Not Systematically Overshoot  

E-Print Network (OSTI)

Canadian-U.S. exchange rate, Review of Financial Economics,economy under flexible exchange rates, Journal of Monetary1976, Expectations and Exchange Rate Dynamics, Journal of

Pippenger, John

2008-01-01T23:59:59.000Z

450

Globalization, Macroeconomic Performance, and the Exchange Rates of Emerging Economies  

E-Print Network (OSTI)

The Impact of Exchange Rate Movements on U.S. Foreign Debt."Performance, and the Exchange Rates of Emerging Economies*volatility, exchange-rate regimes, institutions,

Obstfeld, Maurice

2004-01-01T23:59:59.000Z

451

After the Fall: East Asian Exchange Rates Since the Crisis  

E-Print Network (OSTI)

Case for Floating Exchange Rates in Asia. In Monetary and2005. Classifying Exchange Rate Regimes: Deeds vs. Words. Ronald I. 2005. Exchange Rates under the East Asian Dollar

Cohen, Benjamin J

2007-01-01T23:59:59.000Z

452

Estimating stress heterogeneity from aftershock rate  

E-Print Network (OSTI)

We estimate the rate of aftershocks triggered by a heterogeneous stress change, using the rate-and-state model of Dieterich [1994]. We show than an exponential stress distribution P(\\tau)~ exp(-\\tau/\\tau_0) gives an Omori law decay of aftershocks with time ~1/t^p, with an exponent p=1-A\\sigma_n/\\tau_0, where A is a parameter of the rate-and-state friction law, and \\sigma_n the normal stress. Omori exponent p thus decreases if the stress "heterogeneity" \\tau_0 decreases. We also invert the stress distribution P(\\tau) from the seismicity rate R(t), assuming that the stress does not change with time. We apply this method to a synthetic stress map, using the (modified) scale invariant "k^2" slip model [Herrero and Bernard, 1994]. We generate synthetic aftershock catalogs from this stress change. The seismicity rate on the rupture area shows a huge increase at short times, even if the stress decreases on average. This stochastic slip model gives a Gaussian stress distribution, but nevertheless produces an aftersho...

Helmstetter, A; Helmstetter, Agnes; Shaw, Bruce E.

2005-01-01T23:59:59.000Z

453

Sodium tetraphenylborate solubility and dissolution rates  

DOE Green Energy (OSTI)

The rate of solid sodium tetraphenylborate (NaTPB) dissolution in In-Tank Precipitation salt solutions has been experimentally determined. The data indicates that the dissolution rate of solid NaTPB is a minor contributor the lag time experienced in the 1983 Salt Decontamination Demonstration Test and should not be considered as the rate determining step. Current analytical models for predicting the time to reach the composite lower flammability limit assume that the lag time is not more than 6 hours, and the data supports this assumption (i.e., dissolution by itself requires much less than 6 hours). The data suggests that another step--such as mass transport, the reaction of a benzene precursor or the mixing behavior--is the rate determining factor for benzene release to the vapor space in Tank 48H. In addition, preliminary results from this program show that the degree of agitation employed is not a significant parameter in determining the rate of NaTPB dissolution. As a result of this study, an improved equation for predicting equilibrium tetraphenylborate solubility with respect to temperature and sodium ion concentration has been determined.

Barnes, M.J.; Peterson, R.A.; Swingle, R.F.; Reeves, C.T.

1995-12-31T23:59:59.000Z

454

Resource supply shocks and the interest rate  

SciTech Connect

Using a model of optimal economic growth with exhaustible resources, the author focuses on a real shock as an essential element of a model of ecomomic fluctuations that contributes substantially to variations in the interest rate, and output. When there occurs a sudden negative resource supply shock, the rate of extraction of the resource declines. Along the optimal path with capital stock fixed in the short run, the output-capital ratio and the real interest rate fall instantaneously. The hypothesis is tested with the quarterly US data using estimation techniques of Vector Autoregressions (VARs). Included are five variables in the VAR model: crude oil price, price level, interest rate, industrial production, and copper price. The general vector autoregressive models are estimated with a prior distribution imposed on the parameters of the model. The period of fit is 1958 to 1983. Impulse response functions of the system and historical decompositions of the time series are investigated. Empirical studies support the derived working hypothesis that real interest rate falls instantaneously and then slowly recovers in the long run when there occurs a negative resource supply shock.

Kang, M.S.

1984-01-01T23:59:59.000Z

455

Intraclass Price Elasticity & Electric Rate Design  

E-Print Network (OSTI)

Electric rate design relies on cost incurrance for pricing and pricing structures. However, as utilities move into a marketing mode, rate design needs to respond more to customer reactions to pricing changes. Intraclass price elasticities aid rate designers by estimating customer behavior to change. Intraclass price elasticities vary with customer usage. The more energy used by a customer, the greater the amount of elasticity. For an industrial customer, this means that all energy consumed up to the amount necessary for base operations is relatively inelastic. All energy consumption beyond this becomes more elastic as usage increases. In the book "Innovative Electric Rates," John Chamberlin and Charles Dickson utilize an economic model to test conservation programs. This model utilizes intraclass price elasticities and has a direct use in current electric rate design. The model is a strong indicator of how best a company's electric prices and pricing structures manage demand-side growth, increase energy sales consumption, and aide in non-discriminatory economic development.

Gresham, K. E.

1987-09-01T23:59:59.000Z

456

Discount rates and demand-side management  

SciTech Connect

The standard economic analysis of of implied discount rates for energy-efficiency investment is wrong. First, consumers are not profit maximizing or economic optimizing agents with respect to energy. To the extent consumers make tradeoffs on some criteria other than energy costs, implied discount rates measure that other tradeoff, not the energy cost tradeoff. Second, to the extent that product pricing does not reflect tradeoffs between first cost and energy cost, there is no meaning to implied market discount rates based on these factors. Related to this misinterpretation of consumer and market discount rates is the issue of consumer and utility self-interest. To the extent that utilities can capitalize on the energy-inefficient investment behavior of individuals through DSM programs, it is in their interest and the ratepayer's interest to do so. Considerable evidence suggests that implied discount rates convey extremely misleading information about the level of this underinvestment. Drawing inferences about the value of DSM programs from this information is similarly misleading. An economic explanation of consumer and marker behavior suggests that such underinvestment is both rational and common and that large gains may be achieved through DSM. Societal welfare would be improved if utilities aggressively capitalized on the widespread consumer underinvestment in energy efficiency by incorporating DSM in their resource planning processes.

Chernoff, H.

1993-02-01T23:59:59.000Z

457

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Groups Content Group Activity By term Q & A Feeds Share your own status updates, and follow the updates & activities of others by creating your own account. Or, remember to log in If you already have an account. Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne Nlong Wzeng 429 Throttled (bot load)

458

Property:HeatRate | Open Energy Information  

Open Energy Info (EERE)

HeatRate HeatRate Jump to: navigation, search This is a property of type Number. Pages using the property "HeatRate" Showing 25 pages using this property. (previous 25) (next 25) A AES Mendota Biomass Facility + 17,873.6 + APS Biomass I Biomass Facility + 8,911 + Acme Landfill Biomass Facility + 12,916.67 + Adrian Energy Associates LLC Biomass Facility + 13,170.6 + Agrilectric Power Partners Ltd Biomass Facility + 17,327.1 + Al Turi Biomass Facility + 15,600.2 + Alabama Pine Pulp Biomass Facility + 15,826.23 + Albany Landfill Gas Utilization Project Biomass Facility + 11,913.9 + Altamont Gas Recovery Biomass Facility + 10,500 + American Canyon Power Plant Biomass Facility + 10,886.8 + American Ref-Fuel of Delaware Valley Biomass Facility + 18,674.9 +

459

Event loss rates and readout chips  

E-Print Network (OSTI)

98-57 The LHCb experiment aims at a deadtimeless readout of B­events at a primary bunch crossing rate of 40 MHz. In order to achieve this goal, information from all events must be stored in a pipeline with latency matched to the time needed for the Level 0 trigger decision. Accepted events, which constitute only a small fraction of the total sample, are stored in a fifo of a certain depth and read out with a fixed clock rate. The fifo, also referred to as multi­event or derandomizing buffer, is needed in order to even out statistical fluctuations in the trigger rate. Apart from the length of the pipeline, which determines the maximum latency of the chip, the crucial parameter characterizing a readout chip is the fraction of triggers lost due to limitations of the chip's architecture. This note describes how the different design parameters and operation conditions determine the chip's performance.

Schmelling, M

1998-01-01T23:59:59.000Z

460

The Cosmic Stellar Birth and Death Rates  

E-Print Network (OSTI)

The cosmic stellar birth rate can be measured by standard astronomical techniques. It can also be probed via the cosmic stellar death rate, though until recently, this was much less precise. However, recent results based on measured supernova rates, and importantly, also on the attendant diffuse fluxes of neutrinos and gamma rays, have become competitive, and a concordant history of stellar birth and death is emerging. The neutrino flux from all past core-collapse supernovae, while faint, is realistically within reach of detection in Super-Kamiokande, and a useful limit has already been set. I will discuss predictions for this flux, the prospects for neutrino detection, the implications for understanding core-collapse supernovae, and a new limit on the contribution of type-Ia supernovae to the diffuse gamma-ray background.

John F. Beacom

2006-02-05T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

On the Rate of Spontaneous Magnetic Reconnection  

E-Print Network (OSTI)

Magnetic reconnection is a topological rearrangement of the magnetic field lines, leading to the release of magnetic energy, which is thought to be associated with solar flares, coronal mass ejections and magnetospheric storms. Despite magnetic field lines are supposed to be frozen into the well-conducting plasma, the reconnection observed in nature is, typically, fast, so that the rate of convergence of the magnetic field lines is the fraction of the Alfven speed, v_A. The Sweet-Parker solution predicts reconnection rates which are negligible for the solar or astrophysical conditions, this have prompted research into collisionless reconnection. The stochasticity of magnetic field lines due to ambient turbulence leads to fast reconnection and the rate was predicted to be proportional to kinetic energy density of ambient turbulence. Also, tearing instability of the thin current sheet was proposed as a driver of resistivity-independent reconnection, which was shown to be consistent with two-dimensional simulati...

Beresnyak, Andrey

2013-01-01T23:59:59.000Z

462

Critical reaction rates in hypersonic combustion chemistry  

DOE Green Energy (OSTI)

High Mach number flight requires that the scramjet propulsion system operate at a relatively low static inlet pressure and a high inlet temperature. These two constraints can lead to extremely high temperatures in the combustor, yielding high densities of radical species and correspondingly poor chemical combustion efficiency. As the temperature drops in the nozzle expansion, recombination of these excess radicals can produce more product species, higher heat yield, and potentially more thrust. The extent to which the chemical efficiency can be enhanced in the nozzle expansion depends directly on the rate of the radical recombination reactions. A comprehensive assessment of the important chemical processes and an experimental validation of the critical rate parameters is therefore required if accurate predictions of scramjet performance are to be obtained. This report covers the identification of critical reactions, and the critical reaction rates in hypersonic combustion chemistry. 4 refs., 2 figs.

Oldenborg, R.C.; Harradine, D.M.; Loge, G.W.; Lyman, J.L.; Schott, G.L.; Winn, K.R.

1989-01-01T23:59:59.000Z

463

Analytical Improvements in PV Degradation Rate Determination  

DOE Green Energy (OSTI)

As photovoltaic (PV) penetration of the power grid increases, it becomes vital to know how decreased power output may affect cost over time. In order to predict power delivery, the decline or degradation rates must be determined accurately. For non-spectrally corrected data several complete seasonal cycles (typically 3-5 years) are required to obtain reasonably accurate degradation rates. In a rapidly evolving industry such a time span is often unacceptable and the need exists to determine degradation rates accurately in a shorter period of time. Occurrence of outliers and data shifts are two examples of analytical problems leading to greater uncertainty and therefore to longer observation times. In this paper we compare three methodologies of data analysis for robustness in the presence of outliers, data shifts and shorter measurement time periods.

Jordan, D. C.; Kurtz, S. R.

2011-02-01T23:59:59.000Z

464

Self-consistent microwave plasma heating rates  

SciTech Connect

Under conditions within a hot overdense plasma corona where the field frequency is much less than the electron plasma frequency and the field period is much less than the hydrodynamic expansion time it is shown that electron field reversal heating can exceed the combined classical heating rates due to inverse bremsstrahlung (skin effect) and field pressure (PdV) by a factor approximately v/ sub e//2v/sub i/ (half the ratio of electron and ion thermal velocities). In particular this rate can exceed the inertial expansion cooling rate at a collisionless corona density of approximately 1 percent solid core density and could be realized experimentally at core temperatures approximately 3--5 keV and microwave field intensities approximately 1 MG. (auth)

Ensley, D.L.; White, R.H.

1975-10-01T23:59:59.000Z

465

Intramolecular ET Rates in Modified Ferrocytochromes c  

NLE Websites -- All DOE Office Websites (Extended Search)

Intramolecular Electron-Transfer Rates on Driving Force, pH, Intramolecular Electron-Transfer Rates on Driving Force, pH, and Temperature in Ammineruthenium-Modified Ferrocytochromes c James F. Wishart, Ji Sun, Myung Cho, Chang Su, and Stephan S. Isied J. Phys. Chem. B 101, 687-693 (1997) [Find paper at ACS Publications] or use ACS Articles on Request Abstract: Several ruthenium ammine complexes were used to modify horse-heart cytochrome c at histidine-33, creating a series of (NH3)4(L)Ru-Cyt c derivatives (L = H2O/OH-, ammonia, 4-ethylpyridine, 3,5-lutidine, pyridine, isonicotinamide, N-methylpyrazinium) with a wide range of driving forces for Fe-to-Ru electron transfer (-DG° = -0.125 to +0.46 eV). Electron-transfer rates and activation parameters were measured by pulse radiolysis using azide or carbonate radicals. The driving-force dependence

466

Foolproof completions for high rate production wells  

E-Print Network (OSTI)

Operators, especially those managing production from deepwater reservoirs, are striving to produce hydrocarbons at higher and higher rates without exposing the wells to completion failure risk. To avoid screen failures, recent studies have favored gravel pack (GP) and high rate water pack (HRWP) completions over high-permeability fracturing (HPF), known in the vernacular as a frac&pack (FP) for very high rate wells. While a properly designed GP completion may prevent sand production, it does not stop formation fines migration, and, over time, fines accumulation in the GP will lead to increasing completion skin. Although, and not always, the skin can be removed by acidizing, it is not practical to perform repeated acid treatments on deepwater wells, particularly those with subsea wellheads, and the alternative has been to subject the completion to increasingly high drawdown, accepting a high skin effect. A far better solution is to use a HPF completion. Of course the execution of a successful HPF is not a trivial exercise, and frequently, there is a steep learning curve for such a practice. This work explains the importance to HPF completions of the well trajectory through the interval to be hydraulically fractured, for production, not execution, reasons. A new model quantifies the effect of the well inclination on the connectivity between the fracture and the well via perforations. Guidelines based on the maximum target production rate, including forecasts of multiphase flow, are provided to size the HPF completion to avoid common completion failures that may result from high fluid rate and/or fines movement. Skin model will be developed for both vertical and deviated wells. Once the HPF is properly designed and executed, the operators should end up with a long term low skin good completion quality well. The well will be safely produced at the maximum flow rates, with no need for well surveillance and monitoring.

Tosic, Slavko

2007-12-01T23:59:59.000Z

467

Large deviation sum-queue optimality of a radial sum-rate monotone opportunistic scheduler  

E-Print Network (OSTI)

A centralized wireless system is considered that is serving a fixed set of users with time varying channel capacities. An opportunistic scheduling rule in this context selects a user (or users) to serve based on the current channel state and user queues. Unless the user traffic is symmetric and/or the underlying capacity region a polymatroid, little is known concerning how performance optimal schedulers should tradeoff "maximizing current service rate" (being opportunistic) versus "balancing unequal queues" (enhancing user-diversity to enable future high service rate opportunities). By contrast with currently proposed opportunistic schedulers, e.g., MaxWeight, Exp Rule, a radial sum-rate monotonic (RSM) scheduler de-emphasizes queue-balancing in favor of greedily maximizing the system service rate as the queue-lengths are scaled up linearly. In this paper it is shown that an RSM opportunistic scheduler, p-Log Rule, is not only throughput-optimal, but also maximizes the asymptotic exponential decay rate of the...

Sadiq, Bilal

2009-01-01T23:59:59.000Z

468

Neutrino Event Rates from Gamma Ray Bursts  

E-Print Network (OSTI)

We recalculate the diffuse flux of high energy neutrinos produced by Gamma Ray Bursts (GRB) in the relativistic fireball model. Although we confirm that the average single burst produces only ~10^{-2} high energy neutrino events in a detector with 1 km^2 effective area, i.e. about 10 events per year, we show that the observed rate is dominated by burst-to-burst fluctuations which are very large. We find event rates that are expected to be larger by one order of magnitude, likely more, which are dominated by a few very bright bursts. This greatly simplifies their detection.

F. Halzen; D. W. Hooper

1999-08-12T23:59:59.000Z

469

Rating of Mixed Split Residential Air Conditioners  

E-Print Network (OSTI)

A methodology is presented for rating the performance of mixed, split residential air conditioners. The method accounts for the impact on system performance of the indoor evaporator, expansion device and fan; three major components that are likely to be substituted for the matched components in a mixed system. The method allows calculation of capacity at 95F rating point and seasonal energy efficiency ratio, SEER, without performing laboratory test of the complete system. Limitations of the procedure, present work, and anticipated improvements are also discussed.

Domanski, P. A.

1988-01-01T23:59:59.000Z

470

INVESTIGATION OF THE RATE DEPENDENCE OF LONG-ROD PENETRATION OF GRANULAR MEDIA USING AN IMPROVED DSR ALGORITHM  

SciTech Connect

Digital Speckle Radiography (DSR), a technique allowing measurement of the full field displacement maps in a plane within an opaque material, is used to follow the temporal progression of a long-rod (100 mm long, 10 mm diameter) penetrating a granular sample at a variety of rates. Quasi-static rates of 1.5 mm/min are achieved using an Instron machine, 5 m/s is achieved using a drop-weight and velocities between 10 and 200 m/s are achieved using a light gas gun. These experiments are carried out using a series of time delayed flash x-ray images analysed with an optimised Digital Image Cross Correlation algorithm (DICC). The subsequent data sheds considerable light on the response of granular materials to penetration at a variety of rates. Particularly, a large difference in the response of the material between quasi-static and dynamic rates is observed.

Addiss, John W.; Collins, Adam L.; Proud, William G. [Fracture and Shock Physics, SMF Group, Cavendish Laboratory, J. J. Thomson Ave., Cambridge, CB3 OHE (United Kingdom)

2009-12-28T23:59:59.000Z

471

Rapid start-up / restart avionics provide robust fault tolerance with reduced Size, Weight And Power  

Science Conference Proceedings (OSTI)

An approach that uses rapid start-up computers to provide fault-tolerance and transient upset recovery while minimizing Size, Weight and Power (SWaP) is described. 1 2 This paper provides a status report on a research project conducted by Draper Laboratory ...

Robert Hammett

2011-03-01T23:59:59.000Z

472

Rheology and Molecular Weight Changes during Enzymatic Degradation of a Water-Soluble Polymer  

E-Print Network (OSTI)

viscosifying properties and low cost.3,4 In many of its applications, however, the chemical archi- tecture Tayal, Robert M. Kelly, and Saad A. Khan* Department of Chemical Engineering, North Carolina State weight (Mw), deduced from gel permeation chromatography (GPC), were used to construct a kinetic model

Khan, Saad A.

473

Biological image fusion using a NSCT based variable-weight method  

Science Conference Proceedings (OSTI)

Biological image fusion, as a powerful tool for the protein study, has developed with the advent of various imaging modalities in molecular biology. Combining the fluorescent image and its corresponding phase contrast image will benefit the localization ... Keywords: Biological image fusion, GFP fluorescent image, NSCT, Phase contrast image, Variable weight

Tianjie Li; Yuanyuan Wang

2011-04-01T23:59:59.000Z

474

A Cognitive Bias Approach to Feature Selection and Weighting for Case-Based Learners  

Science Conference Proceedings (OSTI)

Research in psychology, psycholinguistics, and cognitive science has discovered and examined numerous psychological constraints on human information processing. Short term memory limitations, a focus of attention bias, and a preference for the use of ... Keywords: case-based learning, feature set selection, feature weighting, instance-based learning, natural language learning

Claire Cardie

2000-10-01T23:59:59.000Z

475

Optimization of laminate stacking sequence for minimizing weight and cost using elitist ant system optimization  

Science Conference Proceedings (OSTI)

This paper presents the application of ant colony optimization (ACO) for the multi-objective optimization of hybrid laminates for obtaining minimum weight and cost. The investigated laminate is made of glass-epoxy and graphite-epoxy plies to combine ... Keywords: Ant colony optimization, Elitist ant system, Genetic algorithm, Laminated composite materials, Multi-objective optimization, Stacking sequence

Hossein Hemmatian; Abdolhossein Fereidoon; Ali Sadollah; Ardeshir Bahreininejad

2013-03-01T23:59:59.000Z

476

A study on optimal configuration for the mobile manipulator: using weight value and mobility  

Science Conference Proceedings (OSTI)

A Mobile Manipulator is redundant by itself. Using its redundant freedom, a mobile manipulator can perform various task. In this paper, to improve task execution efficiency utilizing the redundancy, optimal configurations of the mobile manipulator ... Keywords: gradient method, mobile robot, mobility, weight value

Jin-Gu Kang; Kwan-Houng Lee

2006-09-01T23:59:59.000Z

477

Shortest Paths in Fuzzy Weighted Graphs Chris Cornelis,* Peter De Kesel,  

E-Print Network (OSTI)

and fuzzy logic--Theory and applications. Upper Saddle River, NJ: Prentice Hall; 1995. 15. Campos L, Muñoz A;12:213­227. 5. Dubois D, Prade H. Fuzzy sets and systems: Theory and applications. New York: Aca- demic PressShortest Paths in Fuzzy Weighted Graphs Chris Cornelis,* Peter De Kesel, Etienne E. Kerre

Gent, Universiteit

478

Applying a Weighting Matrix to the Hierarchical Neural Network Model for Handwritten Thai Character Recognition  

Science Conference Proceedings (OSTI)

This paper proposes a new neural network approach to the off-line handwritten Thai character recognition. This new neural network is a hierarchical neural network; it employs the concept of a weighting matrix in measuring the similarity between the incoming ...

Arit Thammano; Patcharawadee Poolsamran

2006-11-01T23:59:59.000Z

479

Minimizing test suites in software product lines using weight-based genetic algorithms  

Science Conference Proceedings (OSTI)

Test minimization techniques aim at identifying and eliminating redundant test cases from test suites in order to reduce the total number of test cases to execute, thereby improving the efficiency of testing. In the context of software product line, ... Keywords: fault detection capability, feature pairwise coverage, test minimization, weight-based gas

Shuai Wang; Shaukat Ali; Arnaud Gotlieb

2013-07-01T23:59:59.000Z

480

Text analysis of MEDLINE for discovering functional relationships among genes: evaluation of keyword extraction weighting schemes  

Science Conference Proceedings (OSTI)

One of the key challenges of microarray studies is to derive biological insights from the gene-expression patterns. Clustering genes by functional keyword association can provide direct information about the functional links among genes. However, ... Keywords: BEA-PARTITION, DNA microarray lists, MEDLINE, bioinformatics, clustering analysis, data mining, gene clustering, gene expression patterns, information extraction, keyword association, keyword extraction, keyword weighting, text analysis

Ying Liu; Shamkant B. Navathe; Alex Pivoshenko; Venu G. Dasigi; Ray Dingledine; Brian J. Ciliax

2006-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "weight ratings gawr" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Two new approaches for assessing the weights of fuzzy opinions in group decision analysis  

Science Conference Proceedings (OSTI)

The aggregation of fuzzy opinions is an important component of group decision analysis with fuzzy information. This paper proposes two new approaches for the assessment of the weights to be associated with fuzzy opinions. These approaches involve, respectively, ... Keywords: Aggregation of fuzzy opinions, Defuzzification, Fuzzy group decision analysis, Fuzzy opinion

Ying-Ming Wang; Celik Parkan

2006-12-01T23:59:59.000Z

482

High strength, light weight Ti-Y composites and method of making same  

DOE Patents (OSTI)

A high strength, light weight in-situ'' Ti-Y composite is produced by deformation processing a cast body having Ti and Y phase components distributed therein. The composite comprises elongated, ribbon-shaped Ti and Y phase components aligned along an axis of the deformed body.

Verhoeven, J.D.; Ellis, T.W.; Russell, A.M.; Jones, L.L.

1993-04-06T23:59:59.000Z

483

Weighting versus pruning in rule validation for detecting network and host anomalies  

Science Conference Proceedings (OSTI)

For intrusion detection, the LERAD algorithm learns a succinct set of comprehensible rules for detecting anomalies, which could be novel attacks. LERAD validates the learned rules on a separate held-out validation set and removes rules that cause ... Keywords: anomaly detection, machine learning, rule pruning, rule weighting

Gaurav Tandon; Philip K. Chan

2007-08-01T23:59:59.000Z

484

Object extraction from T2 weighted brain MR image using histogram based gradient calculation  

Science Conference Proceedings (OSTI)

Several segmentation methods have been reported with their own pros and cons. Here we proposed a method for object extraction from T2 weighted (T2) brain magnetic resonance (MR) images. The proposed method is purely based on histogram processing for ... Keywords: Cerebrospinal fluid, Gray matter, Magnetic resonance imaging, Object extraction, White matter

Ghulam Gilanie, Muhammad Attique, Hafeez-Ullah, Shahid Naweed, Ejaz Ahmed, Masroor Ikram

2013-09-01T23:59:59.000Z

485

Unique Profile of Chicken Adiponectin, a Predominantly Heavy Molecular Weight Multimer,  

E-Print Network (OSTI)

to be significantly lower in 8- compared with 4-wk-old male chickens and inversely related to abdominal fat pad massUnique Profile of Chicken Adiponectin, a Predominantly Heavy Molecular Weight Multimer adiponectin levels in chickens, which are naturally hyperglycemic relative to mammals. Using gel filtration

Ramachandran, Ramesh

486

A GA-weighted ANFIS model based on multiple stock market volatility causality for TAIEX forecasting  

Science Conference Proceedings (OSTI)

Stock market forecasting is important and interesting, because the successful prediction of stock prices may promise attractive benefits. The economy of Taiwan relies on international trade deeply, and the fluctuations of international stock markets ... Keywords: ANFIS, Genetic algorithm, Neural network, Weighted rule

Liang-Ying Wei

2013-02-01T23:59:59.000Z

487

A light-weight virtual machine monitor for Blue Gene/P  

Science Conference Proceedings (OSTI)

In this paper, we present a light-weight, micro--kernel-based virtual machine monitor (VMM) for the Blue Gene/P Supercomputer. Our VMM comprises a small ?-kernel with virtualization capabilities and, atop, a user-level VMM component that manages virtual ...

Jan Stoess; Jonathan Appavoo; Udo Steinberg; Amos Waterland; Volkmar Uhlig; Jens Kehne

2011-05-01T23:59:59.000Z

488

Planck-Weighted Transmittance and Correction of Solar Reflection for Broadband Infrared Satellite Channels  

Science Conference Proceedings (OSTI)

The line-by-line radiative transfer model (LBLRTM) is used to derive the channel transmittances. The channel transmittance from a level to the top of the atmosphere can be approximated by three methods: Planck-weighted transmittance 1 (PW1), ...

Yong Chen; Fuzhong Weng; Yong Han; Quanhua Liu

2012-03-01T23:59:59.000Z

489

Does the Surface Pressure Equal the Weight per Unit Area of a Hydrostatic Atmosphere?  

Science Conference Proceedings (OSTI)

The common statement that the surface pressure in a hydrostatic atmosphere is equal to the weight per unit area of the air aloft is shown to be true only for a Cartesian world. Here the unit area is the surface area of the base of the atmospheric ...

Peter R. Bannon; Craig H. Bishop; James B. Kerr

1997-11-01T23:59:59.000Z

490

A novel attribute weighting algorithm for clustering high-dimensional categorical data  

Science Conference Proceedings (OSTI)

Due to data sparseness and attribute redundancy in high-dimensional data, clusters of objects often exist in subspaces rather than in the entire space. To effectively address this issue, this paper presents a new optimization algorithm for clustering ... Keywords: Attribute weighting, Cluster analysis, High-dimensional categorical data, Optimization algorithm, Subspace clustering

Liang Bai; Jiye Liang; Chuangyin Dang; Fuyuan Cao

2011-12-01T23:59:59.000Z

491

Max-Weight Scheduling in Queueing Networks with Heavy-Tailed Traffic  

E-Print Network (OSTI)

1 Max-Weight Scheduling in Queueing Networks with Heavy-Tailed Traffic Mihalis G. Markakis, Eytan network with a mix of heavy-tailed and light- tailed traffic, and analyze the impact of heavy unstable otherwise. First, we show that a heavy-tailed traffic flow is delay unstable under any scheduling

Tsitsiklis, John

492

MaxSolver: An efficient exact algorithm for (weighted) maximum satisfiability  

Science Conference Proceedings (OSTI)

Maximum Boolean satisfiability (max-SAT) is the optimization counterpart of Boolean satisfiability (SAT), in which a variable assignment is sought to satisfy the maximum number of clauses in a Boolean formula. A branch and bound algorithm based on the ... Keywords: DPLL, Linear programming, Nonlinear programming, Unit propagation, Variable ordering, Weighted maximum satisfiability

Zhao Xing; Weixiong Zhang

2005-05-01T23:59:59.000Z

493

New image restoration method associated with tetrolets shrinkage and weighted anisotropic total variation  

Science Conference Proceedings (OSTI)

Image restoration is one of the most classical problems in image processing. The main issues of image restoration are deblurring, denoising and preserving fine details. In order to obtain good restored images, we propose a new image restoration method ... Keywords: Image restoration, Tetrolet transform, Weighted anisotropic total variation

Liqian Wang; Liang Xiao; Jun Zhang; Zhihui Wei

2013-04-01T23:59:59.000Z

494

High strength, light weight Ti-Y composites and method of making same  

DOE Patents (OSTI)

A high strength, light weight "in-situ" Ti-Y composite is produced by deformation processing a cast body having Ti and Y phase components distributed therein. The composite comprises elongated, ribbon-shaped Ti and Y phase components aligned along an axis of the deformed body.

Verhoeven, John D. (Ames, IA); Ellis, Timothy W. (Ames, IA); Russell, Alan M. (Ames, IA); Jones, Lawrence L. (Ames, IA)

1993-04-06T23:59:59.000Z

495

Large deviation properties of constant rate data streams sharing a buffer with variable rate cross traffic  

Science Conference Proceedings (OSTI)

We consider a constant rate data stream which shares a buffer with a variable rate data stream. A first come first serve service discipline is applied at the buffer. After service at the first buffer the variable rate traffic leaves the system, whereas ... Keywords: 68M20, 90B15, Markov-modulated fluid sources, fluid model, large buffer asymptotics, many sources asymptotics, on-off sources, primary 60F10, queueing network, secondary 60K25

Kurt Majewski

2008-10-01T23:59:59.000Z

496

Heart Physiology Lab Part 1: Pulse Rate  

E-Print Network (OSTI)

Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

Loughry, Jim

497

Higgs Boson Production Rates in Hadronic Collisions  

E-Print Network (OSTI)

Higgs boson production rates at hadron colliders are reviewed with particular emphasis on progress in the calculation of higher order QCD effects. Emphasis is placed on the uncertainties in the predictions for Higgs boson production. A firm understanding of these uncertainties is crucial for extracting new physics signals.

S. Dawson

2001-11-19T23:59:59.000Z

498

ON RATES OF CONVERGENCE FOR STOCHASTIC ...  

E-Print Network (OSTI)

Our focus is on rates of convergence of estimators of optimal solutions and ..... In preparation for that result, we state the following assumption, which is similar to ...... second problem is LandS, a modification of a simple problem in electrical...

499

Estimation of Mean Rain Rate through Censoring  

Science Conference Proceedings (OSTI)

A mixed lognormal distribution is fit to rain-rate data to estimate the spacetime average. To mitigate problems associated with biased data, data below a minimum and above a maximum threshold are treated as if they are at the respective ...

Donald Martin

1999-06-01T23:59:59.000Z

500

Radar Determination of Snowfall Rate and Accumulation  

Science Conference Proceedings (OSTI)

A unique method that provides for relating radar-measured reflectivity factors to snowfall rates at the ground is presented. Data were provided by a CPS-9, 3.2 cm radar from six 1978 Massachusetts snowstorms A best-fit power-law relationship ...

Roland J. Boucher; James G. Wieler

1985-01-01T23:59:59.000Z