National Library of Energy BETA

Sample records for weight adjwt3 7

  1. U.S. Energy Information Administration (EIA) Indexed Site

    File 7: HVAC, Lighting, and Building Shell Conservation Features (cb86f07.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed

  2. T:\ClearanceEMEUConsumption\cbecs\pubuse86\txt\cb86sasfmt&layout.txt

    U.S. Energy Information Administration (EIA) Indexed Site

    6/txt/cb86sasfmt&layout.txt[3/17/2009 4:43:14 PM] File 1: Summary File (cb86f01.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. Metropolitan statistical area MSA3 25- 25 $MSA. Climate zone CLIMATE3 27- 27 $CLIMAT. B-1 Square footage SQFT3 29- 35

  3. U.S. Energy Information Administration (EIA) Indexed Site

    File 1: Summary File (cb86f01.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. Metropolitan statistical area MSA3 25- 25 $MSA. Climate zone CLIMATE3 27- 27 $CLIMAT. B-1 Square footage SQFT3 29- 35 COMMA14. B-2 Square footage SQFTC3 37- 38 $SQFTC.

  4. U.S. Energy Information Administration (EIA) Indexed Site

    File 2: Building Activity (cb86f02.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. B-3 Any residential use RESUSE3 28- 28 $YESNO. B-4 Percent residential RESPC3 30- 30 $RESPC. Principal building activity PBA3 32-

  5. U.S. Energy Information Administration (EIA) Indexed Site

    File 3: Operating Hours (cb86f03.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. Regular operating hours REGHRS3 31- 31 $YESNO. C-5 Monday thru Friday opening

  6. U.S. Energy Information Administration (EIA) Indexed Site

    File 4: Building Shell, Equipment, Energy Audits, and "Ohter" Conservation Features (cb86f04.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year

  7. U.S. Energy Information Administration (EIA) Indexed Site

    5: End Uses of Major Energy Sources (cb86f05.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  8. U.S. Energy Information Administration (EIA) Indexed Site

    6: End Uses of Minor Energy Sources (cb86f06.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  9. U.S. Energy Information Administration (EIA) Indexed Site

    File 9: Natural Gas and Fuel Oil (cb86f09.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC. Electricity

  10. U.S. Energy Information Administration (EIA) Indexed Site

    File10: District Steam and Hot Water (cb86f10.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  11. U.S. Energy Information Administration (EIA) Indexed Site

    1: Propane and District Chilled Water (cb86f11.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was completed YRCONC3 31- 32 $YRCONC.

  12. U.S. Energy Information Administration (EIA) Indexed Site

    File12: Imputation Flags for Summary Data, Building Activity, Operating Hours, Shell and Equipment (cb86f12.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2

  13. U.S. Energy Information Administration (EIA) Indexed Site

    3: Imputation Flags for Energy Audits, "Other" Conservation Features, and End Uses (cb86f13.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year

  14. U.S. Energy Information Administration (EIA) Indexed Site

    4: Imputation Flags for HVAC, Lighting and Shell Conservation Features (cb86f14.csv) Ques- tion- naire Variable Variable Variable Variable item Description Name Position Format Building identifier BLDGID3 1- 5 Adjusted weight ADJWT3 7- 14 Variance stratum STRATUM3 16- 17 Pair member PAIR3 19- 19 Census region REGION3 21- 21 $REGION. Census division CENDIV3 23- 23 $CENDIV. B-2 Square footage SQFTC3 25- 26 $SQFTC. Principal building activity PBA3 28- 29 $ACTIVTY. D-2 Year construction was

  15. Outrunning major weight gain: a prospective study of 8,340consistent runners during 7 years of follow-up

    SciTech Connect (OSTI)

    Williams, Paul T.

    2006-01-06

    Background: Body weight increases with aging. Short-term,longitudinal exercise training studies suggest that increasing exerciseproduces acute weight loss, but it is not clear if the maintenance oflong-term, vigorous exercise attenuates age-related weight gain inproportion to the exercise dose. Methods: Prospective study of 6,119 maleand 2,221 female runners whose running distance changed less than 5 km/wkbetween their baseline and follow-up survey 7 years later. Results: Onaverage, men who ran modest (0-24 km/wk), intermediate (24-48 km/wk) orprolonged distances (>_48 km/wk) all gained weight throughage 64,however, those who ran ?48 km/wk had one-half the average annual weightgain of those who ran<24 km/wk. Age-related weight gain, and itsreduction by running, were both greater in younger than older men. Incontrast, men s gain in waist circumference with age, and its reductionby running, were the same in older and younger men. Women increased theirbody weight and waist and hip circumferences over time, regardless ofage, which was also reduced in proportion to running distance. In bothsexes, running did not attenuate weight gain uniformly, but ratherdisproportionately prevented more extreme increases. Conclusion: Men andwomen who remain vigorously active gain less weight as they age and thereduction is in proportion to the exercise dose.

  16. 7-Tesla Susceptibility-Weighted Imaging to Assess the Effects of Radiotherapy on Normal-Appearing Brain in Patients With Glioma

    SciTech Connect (OSTI)

    Lupo, Janine M., E-mail: janine.lupo@ucsf.edu [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Chuang, Cynthia F. [Department of Radiation Oncology, University of California, San Francisco, San Francisco, CA (United States); Chang, Susan M. [Department of Neurosurgery, University of California, San Francisco, San Francisco, CA (United States); Barani, Igor J. [Department of Radiation Oncology, University of California, San Francisco, San Francisco, CA (United States); Jimenez, Bert; Hess, Christopher P. [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Nelson, Sarah J. [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Department of Bioengineering and Therapeutic Sciences, University of California, San Francisco, San Francisco, CA (United States)

    2012-03-01

    Purpose: To evaluate the intermediate- and long-term imaging manifestations of radiotherapy on normal-appearing brain tissue in patients with treated gliomas using 7T susceptibility-weighted imaging (SWI). Methods and Materials: SWI was performed on 25 patients with stable gliomas on a 7 Tesla magnet. Microbleeds were identified as discrete foci of susceptibility that did not correspond to vessels. The number of microbleeds was counted within and outside of the T2-hyperintense lesion. For 3 patients, radiation dosimetry maps were reconstructed and fused with the 7T SWI data. Results: Multiple foci of susceptibility consistent with microhemorrhages were observed in patients 2 years after chemoradiation. These lesions were not present in patients who were not irradiated. The prevalence of microhemorrhages increased with the time since completion of radiotherapy, and these lesions often extended outside the boundaries of the initial high-dose volume and into the contralateral hemisphere. Conclusions: High-field SWI has potential for visualizing the appearance of microbleeds associated with long-term effects of radiotherapy on brain tissue. The ability to visualize these lesions in normal-appearing brain tissue may be important in further understanding the utility of this treatment in patients with longer survival.

  17. Weighted Guidelines

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... being amended to reflect the numbering system change. F. Special Program Participants. ... establish the appropriate fee weight: Class A-Manufacturing plants involving ...

  18. Light weight phosphate cements

    DOE Patents [OSTI]

    Wagh, Arun S.; Natarajan, Ramkumar,; Kahn, David

    2010-03-09

    A sealant having a specific gravity in the range of from about 0.7 to about 1.6 for heavy oil and/or coal bed methane fields is disclosed. The sealant has a binder including an oxide or hydroxide of Al or of Fe and a phosphoric acid solution. The binder may have MgO or an oxide of Fe and/or an acid phosphate. The binder is present from about 20 to about 50% by weight of the sealant with a lightweight additive present in the range of from about 1 to about 10% by weight of said sealant, a filler, and water sufficient to provide chemically bound water present in the range of from about 9 to about 36% by weight of the sealant when set. A porous ceramic is also disclosed.

  19. Generalized constructive tree weights

    SciTech Connect (OSTI)

    Rivasseau, Vincent E-mail: adrian.tanasa@ens-lyon.org; Tanasa, Adrian E-mail: adrian.tanasa@ens-lyon.org

    2014-04-15

    The Loop Vertex Expansion (LVE) is a quantum field theory (QFT) method which explicitly computes the Borel sum of Feynman perturbation series. This LVE relies in a crucial way on symmetric tree weights which define a measure on the set of spanning trees of any connected graph. In this paper we generalize this method by defining new tree weights. They depend on the choice of a partition of a set of vertices of the graph, and when the partition is non-trivial, they are no longer symmetric under permutation of vertices. Nevertheless we prove they have the required positivity property to lead to a convergent LVE; in fact we formulate this positivity property precisely for the first time. Our generalized tree weights are inspired by the Brydges-Battle-Federbush work on cluster expansions and could be particularly suited to the computation of connected functions in QFT. Several concrete examples are explicitly given.

  20. Weighted Running Jobs by Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weighted Running Jobs by Group Weighted Running Jobs by Group Daily Graph: Weekly Graph: Monthly Graph: Yearly Graph: 2 Year Graph: Last edited: 2016-04-29 11:34:54

  1. Apparatus for molecular weight separation

    DOE Patents [OSTI]

    Smith, Richard D. (Richland, WA); Liu, Chuanliang (Haverhill, MA)

    2001-01-01

    The present invention relates generally to an apparatus and method for separating high molecular weight molecules from low molecular weight molecules. More specifically, the invention relates to the use of microdialysis for removal of the salt (low molecular weight molecules) from a nucleotide sample (high molecular weight molecules) for ESI-MS analysis. The dialysis or separation performance of the present invention is improved by (1) increasing dialysis temperature thereby increasing desalting efficiency and improving spectrum quality; (2) adding piperidine and imidazole to the dialysis buffer solution and reducing charge states and further increasing detection sensitivity for DNA; (3) using low concentrations (0-2.5 mM NH4OAc) of dialysis buffer and shifting the DNA negative ions to higher charge states, producing a nearly 10-fold increase in detection sensitivity and a slightly decreased desalting efficiency, (4) conducting a two-stage separation or (5) any combination of (1), (2), (3) and (4).

  2. Sandia Energy - More Energy with Less Weight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Energy with Less Weight Home Renewable Energy Energy News Wind Energy More Energy with Less Weight Previous Next More Energy with Less Weight The following is from an article...

  3. Fact #621: May 3, 2010 Gross Vehicle Weight vs. Empty Vehicle Weight

    Office of Energy Efficiency and Renewable Energy (EERE)

    The gross weight of a vehicle (GVW) is the weight of the empty vehicle plus the weight of the maximum payload that the vehicle was designed to carry. In cars and small light trucks, the difference...

  4. Sandia Inverter Performance Test Protocol Efficiency Weighting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inverter Performance Test Protocol Efficiency Weighting Alternatives Jeff Newmiller , ... Abstract-The Sandia Inverter Performance Test Protocol defined two possible ...

  5. 7Be

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Be β+ Decay Evaluated Data Measurements for Half-Life Time 1940HI01: 7Be. 1949SE20: 7Be. 1953KR16: 7Be. 1956BO36: 7Be. 1957WR37: 7Be; T1/2. 1965EN01: 7Be; T1/2. 1970JO21: 7Be; T1/2 in chemical compounds. 1974CR05: 7Be; T1/2. 1975LA16: 7Be; T1/2. 1982CHZF: 7Be. 1982RUZV: 7Be; T1/2, γ-emission probability data. 1996JA10: 7Be(EC); measured Eγ, Iγ, T1/2. 1999HU20: 7Be(EC); measured Eγ, Iγ, T1/2. 1999RA12: 7Be(EC); measured T1/2 for source implanted in various materials. 2000HU20: 7Be(EC);

  6. Production of high molecular weight polylactic acid

    DOE Patents [OSTI]

    Bonsignore, P.V.

    1995-11-28

    A degradable high molecular weight poly(lactic acid) is described. The poly(lactic acid) has a terminal end group of one of carboxyl or hydroxyl groups with low molecular weight poly(lactic acid) units coupled with linking agents of di-isocyanates, bis-epoxides, bis-oxazolines and bis-ortho esters. The resulting high molecular weight poly(lactic acid) can be used for applications taking advantage of the improved physical properties.

  7. Production of high molecular weight polylactic acid

    DOE Patents [OSTI]

    Bonsignore, Patrick V.

    1995-01-01

    A degradable high molecular weight poly(lactic acid). A poly(lactic acid) has a terminal end group of one of carboxyl or hydroxyl groups with low molecular weight poly(lactic acid) units coupled with linking agents of di-isocyanates, bis-epoxides, bis-oxazolines and bis-ortho esters. The resulting high molecular weight poly(lactic acid) can be used for applications taking advantage of the improved physical properties.

  8. Maintaining ideal body weight counseling sessions

    SciTech Connect (OSTI)

    Brammer, S.H.

    1980-10-09

    The purpose of this program is to provide employees with the motivation, knowledge and skills necessary to maintain ideal body weight throughout life. The target audience for this program, which is conducted in an industrial setting, is the employee 40 years of age or younger who is at or near his/her ideal body weight.

  9. RADIOACTIVE ELEMENTS IN THE STANDARD ATOMIC WEIGHTS TABLE

    SciTech Connect (OSTI)

    Holden, N.E.; Holden, N.; Holden,N.E.

    2011-07-27

    In the 1949 Report of the Atomic Weights Commission, a series of new elements were added to the Atomic Weights Table. Since these elements had been produced in the laboratory and were not discovered in nature, the atomic weight value of these artificial products would depend upon the production method. Since atomic weight is a property of an element as it occurs in nature, it would be incorrect to assign an atomic weight value to that element. As a result of that discussion, the Commission decided to provide only the mass number of the most stable (or longest-lived) known isotope as the number to be associated with these entries in the Atomic Weights Table. As a function of time, the mass number associated with various elements has changed as longer-lived isotopes of a particular element has been found in nature, or as improved half-life values of an element's isotopes might cause a shift in the longest-lived isotope from one mass to another. In the 1957 Report of the Atomic Weights Commission, it was decided to discontinue the listing of the mass number in the Atomic Weights Table on the grounds that the kind of information supplied by the mass number is inconsistent with the primary purpose of the Table, i.e., to provide accurate values of 'these constants' for use in various chemical calculations. In addition to the Table of Atomic Weights, the Commission included an auxiliary Table of Radioactive Elements for the first time, where the entry would be the isotope of that element which was the most stable, i.e., the one with the longest known half-life. In their 1973 Report, the Commission noted that the users of the main Table of Atomic Weights were dissatisfied with the omission of values for some elements in that Table and it was decided to reintroduce the mass number for the radioactive elements into the main Table. In their 1983 Report, the Commission decided that radioactive elements were considered to lack a characteristic terrestrial isotopic composition, from which an atomic weight value could be calculated to five or more figure accuracy, without prior knowledge of the sample involved. These elements were again listed in the Atomic Weights Table with no further information, i.e., with no mass number or atomic weight value. For the elements, which have no stable characteristic terrestrial isotopic composition, the data on the half-lives and the relative atomic masses for the nuclides of interest for those elements have been evaluated. The values of the half-lives with their uncertainties are listed in the table. The uncertainties are given for the last digit quoted of the half-life and are given in parentheses. A half-life entry for the Table having a value and an uncertainty of 7 {+-} 3 is listed in the half-life column as 7 (3). The criteria to include data in this Table, is to be the same as it has been for over sixty years. It is the same criteria, which are used for all data that are evaluated for inclusion in the Standard Table of Atomic Weights. If a report of data is published in a peer-reviewed journal, that data is evaluated and considered for inclusion in the appropriate table of the biennial report of the Atomic Weights Commission. As better data becomes available in the future, the information that is contained in either of the Tables of Standard Atomic Weights or in the Table of Radioactive Elements may be modified. It should be noted that the appearance of any datum in the Table of the Radioactive Elements is merely for the purposes of calculating an atomic mass value for any sample of a radioactive material, which might have a variety of isotopic compositions and it has no implication as to the priority for claiming discovery of a given element and is not intended to. The atomic mass values have been taken primarily from the 2003 Atomic Mass Table. Mass values for those radioisotopes that do not appear in the 2003 Atomic mass Table have been taken from preliminary data of the Atomic Mass Data Center. Most of the quoted half-lives.

  10. Microdialysis unit for molecular weight separation

    DOE Patents [OSTI]

    Smith, Richard D. (Richland, WA); Liu, Chuanliang (Richland, WA)

    1999-01-01

    The present invention relates generally to an apparatus and method for separating high molecular weight molecules from low molecular weight molecules. More specifically, the invention relates to the use of microdialysis for removal of the salt (low molecular weight molecules) from a nucleotide sample (high molecular weight molecules) for ESI-MS analysis. The dialysis or separation performance of the present invention is improved by (1) increasing dialysis temperature thereby increasing desalting efficiency and improving spectrum quality; (2) adding piperidine and imidazole to the dialysis buffer solution and reducing charge states and further increasing detection sensitivity for DNA; (3) using low concentrations (0-2.5 mM NH4OAc) of dialysis buffer and shifting the DNA negative ions to higher charge states, producing a nearly 10-fold increase in detection sensitivity and a slightly decreased desalting efficiency, or (4) any combination of (1), (2), and (3).

  11. LightWeight KerneL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Catamount n-Way LightWeight KerneL 1 R&D 100 Entry Catamount n-Way LightWeight KerneL 2 R&D 100 Entry Submitting organization Sandia National Laboratories PO Box 5800 Albuquerque, NM 87185-1319 USA Ron Brightwell Phone: (505) 844-2099 Fax: (505) 845-7442 rbbrigh@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. _____________________________ Ron Brightwell Joint entry

  12. Low molecular weight thermostable {beta}-D-glucosidase from Acidothermus cellulolyticus

    DOE Patents [OSTI]

    Himmel, M.E.; Tucker, M.P.; Adney, W.S.; Nieves, R.A.

    1995-07-11

    A purified low molecular weight {beta}-D-glucosidase is produced from Acidothermus cellulolyticus ATCC 43068. The enzyme is water soluble, possesses activity against pNP-{beta}-D-glucopyranoside, has a high of degree of stability toward heat, exhibits optimal temperature activity at about 65 C at a pH range of from about 2 to about 7, has an inactivation temperature of about 80 C at a pH range of from about 2 to about 7 and has a molecular weight of about 50.5--54.5 kD as determined by SDS-PAGE. 6 figs.

  13. Low molecular weight thermostable .beta.-D-glucosidase from acidothermus cellulolyticus

    DOE Patents [OSTI]

    Himmel, Michael E.; Tucker, Melvin P.; Adney, William S.; Nieves, Rafael A.

    1995-01-01

    A purified low molecular weight .beta.-D-glucosidase is produced from Acidothermus cellulolyticus ATCC 43068. The enzyme is water soluble, possesses activity against pNP-.beta.-D-glucopyranoside, has a high of degree of stability toward heat, exhibits optimal temperature activity at about 65.degree. C. at a pH range of from about 2 to about 7, has an inactivation temperature of about 80.degree. C. at a pH range of from about 2 to about 7 and has a molecular weight of about 50.5-54.5 kD as determineded by SDS-PAGE.

  14. The Light-Weight Group Library

    Energy Science and Technology Software Center (OSTI)

    2012-07-02

    The Light-Weight Group (LWGRP) bibrary provides data structures and collective routines to define and operate on groups of MPI processes. Groups can be created and freed efficiently in O(log N) time space requiring less overhead that constructing full MPI communicators. This facilitates faster development of applications and libraries that need to rapidly create, use, and destroy process groups.

  15. Molecular Weight Effects on Particle and Polymer Microstructure...

    Office of Scientific and Technical Information (OSTI)

    Molecular Weight Effects on Particle and Polymer Microstructure in Concentrated Polymer Solutions Citation Details In-Document Search Title: Molecular Weight Effects on Particle ...

  16. ch_7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 7.0 Glossar Glossar y y 7-1 DOE/EIS-0287 Terms in this glossary are defined based on the context in which they are to be used in this Environmental Impact Statement (EIS). - New Information - DOE/EIS-0287 7-2 Glossary 100-year flood A flood that occurs, on average, every 100 years (equates to a 1 percent probability of occurring in any given year). 500-year flood A flood that occurs, on average, every 500 years (equates to a 0.2 percent probability of occurring in any given year). accident An

  17. December 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 December 7 PDSF Users Meeting 12/7/10 Attending: Eric, Katie and Jay from NERSC and users Andrei, Yushu, Thomas, Jeff P., Craig, Joanna Cluster status: Cluster has been full most of the time and is full today. STAR and ALICE running a steady stream of grid jobs. Outages: Yesterday there were GPFS problems related to the kernal issue on some nodes that had not yet been upgraded. This prevented interactive logins for a while. Upcoming downtimes: At some point there will be downtime for home and

  18. Lecture 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.12 shows the structure of a stoichiometric methane-air flame, computed using the GRI-Mech 3.0 (G. P. Smith, D. M. Golden, M. Frenklach, N. W. Moriarty, B. Eiteneer, M....

  19. 7He

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    deduced resonances, J, . 1998GO30: 9Be(-, d), 11B(-, 2d), 11B(-, pt), 10B(-, pd), E at rest; measured missing mass spectra. 7He deduced excited levels, widths....

  20. June 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 June 7 Attending: Eric, Jay and Katie from NERSC and users Andrei, Jeff A. and Jeff P. Utilization: Cluster tends to be running at about 50% of capacity on average the past month. Recent Downtimes/Outages: 6/1: SWO for most of the day: /home migration to new hardware was completed, updated BestMan on pdsfdtn1. This upgrade will hopefully address some timeout bug that had affected STAR transfers. Upcoming Downtimes: No clusterwide outages planned but eliza3 needs a reboot. This shouldn't

  1. Light-weight analyzer for odor recognition

    DOE Patents [OSTI]

    Vass, Arpad A; Wise, Marcus B

    2014-05-20

    The invention provides a light weight analyzer, e.g., detector, capable of locating clandestine graves. The detector utilizes the very specific and unique chemicals identified in the database of human decompositional odor. This detector, based on specific chemical compounds found relevant to human decomposition, is the next step forward in clandestine grave detection and will take the guess-work out of current methods using canines and ground-penetrating radar, which have historically been unreliable. The detector is self contained, portable and built for field use. Both visual and auditory cues are provided to the operator.

  2. Moq--7

    Office of Legacy Management (LM)

    - .A. Moq--7 . ) >C * : ' 4 TiTERIM PzPxi lUDIc:LOGICAL SURVEY OF THE PRCFERTY .' .T 92CC LAY-i-Y AVEXIJE, li.ZELv00D, MISSOURI 2. 14'. Legget: P. T. ? ercixe F. F. iiayood ...

  3. Table 7

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Table 7 Created on: 4/27/2016 9:48:20 AM Table 7. Marketed production of natural gas in selected states and the Federal Gulf of Mexico, 2011-2016 (million cubic feet) Year and Month Alaska Arkansas California Colorado Kansas Louisiana Montana New Mexico North Dakota Ohio 2011 Total 356,225 1,072,212 250,177 1,637,576 309,124 3,029,206 74,624 1,237,303 97,102 78,858 2012 Total 351,259 1,146,168 246,822 1,709,376 296,299 2,955,437 66,954 1,215,773 172,242 84,482 2013 Total 338,182 1,139,654

  4. Light weight high-stiffness stage platen

    DOE Patents [OSTI]

    Spence, Paul A. (Pleasanton, CA)

    2001-01-01

    An improved light weight, stiff stage platen for photolithography is provided. The high stiffness of the stage platen is exemplified by a relatively high first resonant vibrational mode as determined, for instance, by finite element modal analysis. The stage platen can be employed to support a chuck that is designed to secure a mask or wafer. The stage platen includes a frame that has interior walls that define an interior region and that has exterior walls wherein the outer surfaces of at least two adjacent walls are reflective mirror surfaces; and a matrix of ribs within the interior region that is connected to the interior walls wherein the stage platen exhibits a first vibrational mode at a frequency of greater than about 1000 Hz.

  5. FY 2009 Progress Report for Lightweighting Materials - 7. Low...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2009 Progress Report for Lightweighting Materials - 7. Low-Cost Carbon Fiber The primary Lightweight Materials activity goal is to validate a cost-effective weight reduction in ...

  6. Approximate Weighted Matching On Emerging Manycore and Multithreaded Architectures

    SciTech Connect (OSTI)

    Halappanavar, Mahantesh; Feo, John T.; Villa, Oreste; Tumeo, Antonino; Pothen, Alex

    2012-11-30

    Graph matching is a prototypical combinatorial problem with many applications in computer science and scientific computing, but algorithms for computing optimal matchings are challenging to parallelize. Approximate matching algorithms provide an alternate route for parallelization, and in many contexts compute near-optimal matchings for large-scale graphs. We present sharedmemory parallel implementations for computing half-approximate weighted matching on state-of-the-art multicore (Intel Nehalem and AMD Magny-Cours), manycore (Nvidia Tesla and Nvidia Fermi) and massively multithreaded (Cray XMT) platforms. We provide two implementations: the first implementation uses shared work queues, and is suited to all these platforms; the second implementation is based on dataflow principles, and exploits the architectural features of the Cray XMT. Using a carefully chosen dataset that exhibits characteristics from a wide range of real-world applications, we show scalable performance across different platforms. In particular, for one instance of the input, an R-MAT graph (RMAT-G), we show speedups of: about 32 on 48 cores of an AMD Magny-Cours; 7 on 8 cores of Intel Nehalem; 3 on Nvidia Tesla and 10 on Nvidia Fermi relative to one core of Intel Nehalem; and 60 on 128 processors of Cray XMT. We demonstrate good weak and strong scaling for graphs with up to a billion edges using up to 12, 800 threads. Given the breadth of this work, we focus on simplicity and portability of software rather than excessive fine-tuning for each platform. To the best of our knowledge, this is the first such large-scale study of the half-approximate weighted matching problem on shared-memory platforms. Driven by the critical enabling role of combinatorial algorithms such as matching in scientific computing and the emergence of informatics applications, there is a growing demand to support irregular computations on current and future computing platforms. In this context, we evaluate the capability of emerging multithreaded platforms to tolerate latency induced by irregular memory access patterns, and to support fine-grained parallelism via light-weight synchronization mechanisms. By contrasting the architectural features of these platforms against the Cray XMT, which is specifically designed to support irregular memory-intensive applications, we delineate the impact of these choices on performance.

  7. I-7

    Office of Legacy Management (LM)

    7 i , /' ~ -2 Lt.<.? i ~ ;.e I i; c * '" .,-, _ -_ ORNL/RASA-85/6 Health and Safety Research Division PRELIMINARY RADIOLOGICAL SURVEY OF THE FORMER HAVENS PLANT OF TEE BRIDGEPORT BRASS COMPANY, BRIDGEPORT, CONNE~ICLTT May 1985 . Work performed as part of the RADIOLOGICAL SURVEY ACTIVITIES PROGRAM OAK RIDGE NATIONAL LABORATORY Oak Ridge, Tennessee 37831 operated by MARTIN MARIETTA ENERGY SYSTEMS, INC. for the U. S. DEPARTMENT OF ENERGY under Contract No. DE-AC05-840R21400 , PRELIMINARY

  8. Amendment 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Date: March 13, 2008 ISSUED BY: National Renewable Energy Laboratory 1617 Cole Blvd. Golden, CO 80401-3393 PROJECT NAME & LOCATION Design/Build Subcontract for the Research Support Facility Golden, CO The above numbered solicitation is amended as set forth below. The hour and date specified for receipt of offers [X] is not extended and remains 4 p.m. MDT, 3/27/08. [] is hereby FAILURE TO ACKNOWLEDGE THIS AMENDMENT MAY RESULT IN REJECTION OF YOUR OFFER. EXCEPT AS PROVIDED HEREIN, ALL TERMS

  9. Light-weight radioisotope heater impact tests

    SciTech Connect (OSTI)

    Reimus, M.A.H.; Rinehart, G.H.; Herrera, A.

    1998-12-31

    The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. To compare the performance of the LWRHUs fabricated for the Cassini mission with the performance of those fabricated for the Galileo mission, and to determine a failure threshold, two types of impact tests were conducted. A post-reentry impact test was performed on one of 180 flight-quality units produced for the Cassini mission and a series of sequential impact tests using simulant-fueled LWRHU capsules were conducted respectively. The results showed that deformation and fuel containment of the impacted Cassini LWRHU was similar to that of a previously tested Galileo LWRHU. Both units sustained minimal deformation of the aeroshell and fueled capsule; the fuel was entirely contained by the platinum capsule. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s.

  10. The effects of changing exercise levels on weight and age-relatedweight gain

    SciTech Connect (OSTI)

    Williams, Paul T.; Wood, Peter D.

    2004-06-01

    To determine prospectively whether physical activity canprevent age-related weight gain and whether changing levels of activityaffect body weight. DESIGN/SUBJECTS: The study consisted of 8,080 maleand 4,871 female runners who completed two questionnaires an average(+/-standard deviation (s.d.)) of 3.20+/-2.30 and 2.59+/-2.17 yearsapart, respectively, as part of the National Runners' Health Study.RESULTS: Changes in running distance were inversely related to changes inmen's and women's body mass indices (BMIs) (slope+/-standard error(s.e.): -0.015+/-0.001 and -0.009+/-0.001 kg/m(2) per Deltakm/week,respectively), waist circumferences (-0.030+/-0.002 and -0.022+/-0.005 cmper Deltakm/week, respectively) and percent changes in body weight(-0.062+/-0.003 and -0.041+/-0.003 percent per Deltakm/week,respectively, all P<0.0001). The regression slopes were significantlysteeper (more negative) in men than women for DeltaBMI and Deltapercentbody weight (P<0.0001). A longer history of running diminishedthe impact of changing running distance on men's weights. When adjustedfor Deltakm/week, years of aging in men and years of aging in women wereassociated with increases of 0.066+/-0.005 and 0.056+/-0.006 kg/m(2) inBMI, respectively, increases of 0.294+/-0.019 and 0.279+/-0.028 percentin Delta percentbody weight, respectively, and increases of 0.203+/-0.016and 0.271+/-0.033 cm in waist circumference, respectively (allP<0.0001). These regression slopes suggest that vigorous exercise mayneed to increase 4.4 km/week annually in men and 6.2 km/week annually inwomen to compensate for the expected gain in weight associated with aging(2.7 and 3.9 km/week annually when correct for the attenuation due tomeasurement error). CONCLUSIONS: Age-related weight gain occurs evenamong the most active individuals when exercise is constant.Theoretically, vigorous exercise must increase significantly with age tocompensate for the expected gain in weight associated withaging.

  11. 2-D weighted least-squares phase unwrapping

    DOE Patents [OSTI]

    Ghiglia, D.C.; Romero, L.A.

    1995-06-13

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals. 6 figs.

  12. 2-D weighted least-squares phase unwrapping

    DOE Patents [OSTI]

    Ghiglia, Dennis C.; Romero, Louis A.

    1995-01-01

    Weighted values of interferometric signals are unwrapped by determining the least squares solution of phase unwrapping for unweighted values of the interferometric signals; and then determining the least squares solution of phase unwrapping for weighted values of the interferometric signals by preconditioned conjugate gradient methods using the unweighted solutions as preconditioning values. An output is provided that is representative of the least squares solution of phase unwrapping for weighted values of the interferometric signals.

  13. Low molecular weight thermostable .beta.-D-glucosidase from acidotherm...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visual Patent Search Success Stories News Events Find More Like This Return to Search Low molecular weight thermostable .beta.-D-glucosidase from acidothermus cellulolyticus...

  14. ,"Sulfur Content, Weighted Average Refinery Crude Oil Input Qualities...

    U.S. Energy Information Administration (EIA) Indexed Site

    Weighted Average Refinery Crude Oil Input Qualities",16,"Monthly","22016","1151985" ,"Release Date:","4292016" ,"Next Release Date:","5312016" ,"Excel File ...

  15. Radioactive Elements in the Standard Atomic Weights Table.

    SciTech Connect (OSTI)

    Holden,N.E.

    2007-08-04

    In the 1949 Report of the Atomic Weights Commission, a series of new elements were added to the Atomic Weights Table. Since these elements had been produced in the laboratory and were not discovered in nature, the atomic weight value of these artificial products would depend upon the production method. Since atomic weight is a property of an element as it occurs in nature, it would be incorrect to assign an atomic weight value to that element. As a result of that discussion, the Commission decided to provide only the mass number of the most stable (or longest-lived) known isotope as the number to be associated with these entries in the Atomic Weights Table. As a function of time, the mass number associated with various elements has changed as longer-lived isotopes of a particular element has been found in nature, or as improved half-life values of an element's isotopes might cause a shift in the longest-lived isotope from one mass to another. In the 1957 Report of the Atomic Weights Commission, it was decided to discontinue the listing of the mass number in the Atomic Weights Table on the grounds that the kind of information supplied by the mass number is inconsistent with the primary purpose of the Table, i.e., to provide accurate values of 'these constants' for use in various chemical calculations. In addition to the Table of Atomic Weights, the Commission included an auxiliary Table of Radioactive Elements for the first time, where the entry would be the isotope of that element which was the most stable, i.e., the one with the longest known half-life. In their 1973 Report, the Commission noted that the users of the main Table of Atomic Weights were dissatisfied with the omission of values for some elements in that Table and it was decided to reintroduce the mass number for the radioactive elements into the main Table. In their 1983 Report, the Commission decided that radioactive elements were considered to lack a characteristic terrestrial isotopic composition, from which an atomic weight value could be calculated to five or more figure accuracy, without prior knowledge of the sample involved. These elements were again listed in the Atomic Weights Table with no further information, i.e., with no mass number or atomic weight value.

  16. app_c7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Description of Input and Final Waste Streams C.7-iii DOE/EIS-0287 Idaho HLW & FD EIS TABLE OF CONTENTS Section Page Appendix C.7 Description of Input and Final Waste Streams C.7-1 LIST OF TABLES Table Page C.7-1 Waste processing alternative inputs. C.7-1 C.7-2 Bin set total chemical inventory (fission and activation species decayed to 2016). C.7-2 C.7-3 Bin set total inventory of radionuclides (decayed to 2016). C.7-3 C.7-4 Calculated radionuclides activities for SBW (curies per liter)

  17. Fact #807: December 9, 2013 Light Vehicle Weights Leveling Off

    Broader source: Energy.gov [DOE]

    The effect of the oil crisis in the mid-1970s and subsequent rise of smaller import vehicles is evident in the graph below, showing a dramatic fall in average vehicle weight from model years 1975...

  18. Short-Term Energy Outlook Supplement: Energy-weighted industrial...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Energy-weighted industrial production indices December 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information ...

  19. Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A

    Office of Scientific and Technical Information (OSTI)

    Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic Resonance. (Journal Article) | SciTech Connect Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic Resonance. Citation Details In-Document Search Title: Molecular Weight Distributions of Irradiated Siloxane-Based Elastomers: A Complementary Study by Statistical Modeling and Multiple Quantum Nuclear Magnetic

  20. Path Integral for Stochastic Inflation: Non-Perturbative Volume Weighting,

    Office of Scientific and Technical Information (OSTI)

    Complex Histories, Initial Conditions and the End of Inflation (Journal Article) | SciTech Connect Path Integral for Stochastic Inflation: Non-Perturbative Volume Weighting, Complex Histories, Initial Conditions and the End of Inflation Citation Details In-Document Search Title: Path Integral for Stochastic Inflation: Non-Perturbative Volume Weighting, Complex Histories, Initial Conditions and the End of Inflation Authors: Gratton, Steven ; /KIPAC, Menlo Park /Cambridge U. Publication Date:

  1. Molecular Weight Effects on Particle and Polymer Microstructure in

    Office of Scientific and Technical Information (OSTI)

    Concentrated Polymer Solutions (Journal Article) | SciTech Connect Molecular Weight Effects on Particle and Polymer Microstructure in Concentrated Polymer Solutions Citation Details In-Document Search Title: Molecular Weight Effects on Particle and Polymer Microstructure in Concentrated Polymer Solutions Authors: Kim, So Youn ; Zukoski, Charles F. [1] + Show Author Affiliations (UIUC) [UIUC Publication Date: 2014-02-13 OSTI Identifier: 1095372 Resource Type: Journal Article Resource

  2. Attachment C7

    Office of Environmental Management (EM)

    C7 TRU WASTE CONFIRMATION Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C7 Page C7-i ATTACHMENT C7 TRU WASTE CONFIRMATION TABLE OF CONTENTS Introduction ................................................................................................................................. 1 C7-1 Permittee Confirmation of TRU Mixed Waste

  3. 7Li Cross Section

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7Li(, '): emission yield 1.0 - 3.4 1 01182012 2011YA02 7Li(, ): elastic scattering differential 1.0 - 4.5 cm 170 07192011 7Li(, p): differential...

  4. Two weight system for measuring depth and sediment in slurry-supported excavations

    SciTech Connect (OSTI)

    Deming, P.; Good, D.

    1999-07-01

    This paper describes a two weight system using bar and flat shaped weights for measuring depth and detecting sediment at the bottom of slurry-supported excavations. Currently there are no standard depth measurement weights or methods for reliably identifying bottom sediment. Two weights and a procedural system for using the weights is described. Details suitable for manufacture are provided.

  5. Effectiveness-weighted control method for a cooling system

    DOE Patents [OSTI]

    Campbell, Levi A.; Chu, Richard C.; David, Milnes P.; Ellsworth Jr., Michael J.; Iyengar, Madhusudan K.; Schmidt, Roger R.; Simons, Robert E.

    2015-12-15

    Energy efficient control of cooling system cooling of an electronic system is provided based, in part, on weighted cooling effectiveness of the components. The control includes automatically determining speed control settings for multiple adjustable cooling components of the cooling system. The automatically determining is based, at least in part, on weighted cooling effectiveness of the components of the cooling system, and the determining operates to limit power consumption of at least the cooling system, while ensuring that a target temperature associated with at least one of the cooling system or the electronic system is within a desired range by provisioning, based on the weighted cooling effectiveness, a desired target temperature change among the multiple adjustable cooling components of the cooling system. The provisioning includes provisioning applied power to the multiple adjustable cooling components via, at least in part, the determined control settings.

  6. Effectiveness-weighted control of cooling system components

    DOE Patents [OSTI]

    Campbell, Levi A.; Chu, Richard C.; David, Milnes P.; Ellsworth Jr., Michael J.; Iyengar, Madhusudan K.; Schmidt, Roger R.; Simmons, Robert E.

    2015-12-22

    Energy efficient control of cooling system cooling of an electronic system is provided based, in part, on weighted cooling effectiveness of the components. The control includes automatically determining speed control settings for multiple adjustable cooling components of the cooling system. The automatically determining is based, at least in part, on weighted cooling effectiveness of the components of the cooling system, and the determining operates to limit power consumption of at least the cooling system, while ensuring that a target temperature associated with at least one of the cooling system or the electronic system is within a desired range by provisioning, based on the weighted cooling effectiveness, a desired target temperature change among the multiple adjustable cooling components of the cooling system. The provisioning includes provisioning applied power to the multiple adjustable cooling components via, at least in part, the determined control settings.

  7. Buildings Energy Data Book: 5.7 Appliances

    Buildings Energy Data Book [EERE]

    7 Room Air Conditioner Capacities and Energy Efficiencies (Shipment-Weighted Averages) EER 1972 5.98 N.A. 1980 7.02 N.A. 1985 7.70 N.A. 1990 8.73 N.A. 1995 9.03 12.0 2000 9.30 11.7 2001 9.63 11.7 2002 9.75 11.7 2003 9.75 11.7 2004 9.71 11.7 2005 9.95 12.0 2006 10.02 12.0 2007 9.81 12.0 2008 9.93 12.0 2009 10.05 12.0 2010 10.18 12.0 Source(s): AHAM, Energy Efficiency and Consumption Trends 2010; AHAM, Efficiency and Consumption Trends 2009; AHAM, 1997 Major Appliance Industry Fact Book, Oct.

  8. RELAP-7 Theory Manual

    SciTech Connect (OSTI)

    Berry, Ray Alden; Peterson, John William; Zhang, Hongbin; Martineau, Richard Charles; Zhao, Haihua; Zou, Ling; Andrs, David

    2015-03-01

    This document summarizes the physical models and mathematical formulations used in the RELAP-7 code.

  9. FY 2009 Volume 7

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE/CF-030 Volume 7 Fossil Energy Research and Development Naval Petroleum and Oil Shale Reserves Strategic Petroleum Reserve Northeast Home Heating Oil Reserve Clean Coal Technology Ultra-Deepwater Unconventional Natural Gas February 2008 Office of Chief Financial Officer Department of Energy FY 2009 Congressional Budget Request Volume 7 DOE/CF-030 Volume 7 Fossil Energy Research and Development Naval Petroleum and Oil Shale Reserves Strategic Petroleum Reserve Northeast Home Heating Oil

  10. A = 7 General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 General Tables The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions The General Table for 7Li is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Theoretical Work Model Calculations Photodisintegration Polarization Fission and Fusion Elastic and Inelastic Scattering Projectile Fragmentation and Multifragmentation Astrophysical Hyperfine Structure

  11. Enhancing Community Detection By Affinity-based Edge Weighting Scheme

    SciTech Connect (OSTI)

    Yoo, Andy; Sanders, Geoffrey; Henson, Van; Vassilevski, Panayot

    2015-10-05

    Community detection refers to an important graph analytics problem of finding a set of densely-connected subgraphs in a graph and has gained a great deal of interest recently. The performance of current community detection algorithms is limited by an inherent constraint of unweighted graphs that offer very little information on their internal community structures. In this paper, we propose a new scheme to address this issue that weights the edges in a given graph based on recently proposed vertex affinity. The vertex affinity quantifies the proximity between two vertices in terms of their clustering strength, and therefore, it is ideal for graph analytics applications such as community detection. We also demonstrate that the affinity-based edge weighting scheme can improve the performance of community detection algorithms significantly.

  12. Weight Loss Regime for Massive Low Temperature Electrons | The Ames

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Weight Loss Regime for Massive Low Temperature Electrons A compound made out of ytterbium (Yb), platinum (Pt), and bismuth (Bi) offers researchers the opportunity to watch the birth of magnetic behavior by applying small changes in magnetic field or temperature. Despite the electrons having effective masses of nearly 10,000 times their normal mass when YbPtBi becomes magnetic, researchers have been able to monitor its quantum oscillations, key for determining important electronic

  13. Evolutionary Design of Low Molecular Weight Organic Anolyte Materials for

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Applications in Nonaqueous Redox Flow Batteries - Joint Center for Energy Storage Research 30, 2015, Research Highlights Evolutionary Design of Low Molecular Weight Organic Anolyte Materials for Applications in Nonaqueous Redox Flow Batteries Images for Organic Anolyte Materials Scientific Achievement All-organic anolyte materials for nonaqueous redox flow batteries with high stability at all redox states were designed through an iterative study. Anolyte materials exhibit two chemically

  14. Highest-weight representations of Brocherd`s algebras

    SciTech Connect (OSTI)

    Slansky, R.

    1997-01-01

    General features of highest-weight representations of Borcherd`s algebras are described. to show their typical features, several representations of Borcherd`s extensions of finite-dimensional algebras are analyzed. Then the example of the extension of affine- su(2) to a Borcherd`s algebra is examined. These algebras provide a natural way to extend a Kac-Moody algebra to include the hamiltonian and number-changing operators in a generalized symmetry structure.

  15. High molecular weight polysaccharide that binds and inhibits virus

    DOE Patents [OSTI]

    Konowalchuk, Thomas W

    2014-01-14

    This invention provides a high molecular weight polysaccharide capable of binding to and inhibiting virus and related pharmaceutical formulations and methods on inhibiting viral infectivity and/or pathogenicity, as well as immunogenic compositions. The invention further methods of inhibiting the growth of cancer cells and of ameliorating a symptom of aging. Additionally, the invention provides methods of detecting and/or quantifying and/or isolating viruses.

  16. Studies of transverse momentum dependent parton distributions and Bessel weighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aghasyan, M.; Avakian, H.; De Sanctis, E.; Gamberg, L.; Mirazita, M.; Musch, B.; Prokudin, A.; Rossi, P.

    2015-03-01

    In this paper we present a new technique for analysis of transverse momentum dependent parton distribution functions, based on the Bessel weighting formalism. The procedure is applied to studies of the double longitudinal spin asymmetry in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator which includes quark intrinsic transverse momentum within the generalized parton model. Using a fully differential cross section for the process, the effect of four momentum conservation is analyzed using various input models for transverse momentum distributions and fragmentation functions. We observe a few percent systematic offset of the Bessel-weighted asymmetry obtained from Montemore » Carlo extraction compared to input model calculations, which is due to the limitations imposed by the energy and momentum conservation at the given energy/Q2. We find that the Bessel weighting technique provides a powerful and reliable tool to study the Fourier transform of TMDs with controlled systematics due to experimental acceptances and resolutions with different TMD model inputs.« less

  17. 7Li Cross Section

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    p, X) (Current as of 12/16/2015) NSR Reaction Ep (MeV) Cross Section File X4 Dataset Date Added 1997GO13 7Li(pol. p, γ): total σ, S-factor for capture to third-excited state 0 - 80 keV X4 06/12/2014 1994CH23 7Li(pol. p, γ): deduced S-factor ≤ 80 keV X4 06/12/2014 1999SP09 7Li(p, α): deduced S-factor < 0.4 X4 06/12/2014 1974BU16 7Li(p, n): σ < 3.8 X4 03/14/2012 2011PI04 7Li(p, α): analyzed excitation functions Ecm = 0 - 7 X4 06/12/2014 2001LA35 7Li(p, α): deduced S(E)-factor 10 -

  18. Precise measurement of the top quark mass in dilepton decays using optimized neutrino weighting

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Abazov, Victor Mukhamedovich

    2015-11-11

    We measure the top quark mass in dilepton final states of tt¯ events in pp¯ collisions at √s= 1.96 TeV, using data corresponding to an integrated luminosity of 9.7 fb-1 at the Fermilab Tevatron Collider. The analysis features a comprehensive optimization of the neutrino weighting method to minimize the statistical uncertainties. Furthermore, we improve the calibration of jet energies using the calibration determined in tt¯ → lepton + jets events, which reduces the otherwise limiting systematic uncertainty from the jet energy scale. As a result, the measured top quark mass is mt = 173.32±1.36(stat)±0.85(syst) GeV.

  19. Energy Level Diagrams A=7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Available in the following years: (2002), (1988), (1984), (1979), (1974), (1966), (1959) A=7 Energy Level Diagrams from (2002TI10) GIF (Graphic Interchange Format): 7He (65 KB) 7Li (130 KB) 7Be (65 KB) Isobar Diagram (65 KB) PDF (Portable Document Format): 7He (35 KB) 7Li (65 KB) 7Be (65 KB) Isobar Diagram (65 KB) EPS (Encapsulated Postscript): 7He (1.7 MB) 7Li (1.8 MB) 7Be (1.6 MB) Isobar Diagram (1.6 MB) A=7 Energy Level Diagrams from (1988AJ01) GIF (Graphic Interchange Format): 7Li (80 KB)

  20. BEAMLINE 7-2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7-2 CURRENT STATUS: Open SUPPORTED TECHNIQUES: X-ray scattering X-ray diffraction MAIN SCIENTIFIC DISCIPLINES: Materials Environmental % TIME GENERAL USE: 100% SCHEDULING:...

  1. 7He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    He General Table The General Table for 7He is subdivided into the following categories: Experimental Theoretical Model Calculations Hypernuclei and Mesons Pions

  2. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Table 7.4a Consumption of Combustible Fuels for Electricity Generation and Useful Thermal Output: Total (All Sectors) (Sum of Tables 7.4b and 7.4c) Coal a Petroleum Natural Gas f Other Gases g Biomass Other j Distillate Fuel Oil b Residual Fuel Oil c Other Liquids d Petroleum Coke e Total e Wood h Waste i Thousand Short Tons Thousand Barrels Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1950 Total .................... 91,871 5,423 69,998 NA NA 75,421 629 NA 5 NA NA 1955

  3. Accelerated weight histogram method for exploring free energy landscapes

    SciTech Connect (OSTI)

    Lindahl, V.; Lidmar, J.; Hess, B.

    2014-07-28

    Calculating free energies is an important and notoriously difficult task for molecular simulations. The rapid increase in computational power has made it possible to probe increasingly complex systems, yet extracting accurate free energies from these simulations remains a major challenge. Fully exploring the free energy landscape of, say, a biological macromolecule typically requires sampling large conformational changes and slow transitions. Often, the only feasible way to study such a system is to simulate it using an enhanced sampling method. The accelerated weight histogram (AWH) method is a new, efficient extended ensemble sampling technique which adaptively biases the simulation to promote exploration of the free energy landscape. The AWH method uses a probability weight histogram which allows for efficient free energy updates and results in an easy discretization procedure. A major advantage of the method is its general formulation, making it a powerful platform for developing further extensions and analyzing its relation to already existing methods. Here, we demonstrate its efficiency and general applicability by calculating the potential of mean force along a reaction coordinate for both a single dimension and multiple dimensions. We make use of a non-uniform, free energy dependent target distribution in reaction coordinate space so that computational efforts are not wasted on physically irrelevant regions. We present numerical results for molecular dynamics simulations of lithium acetate in solution and chignolin, a 10-residue long peptide that folds into a β-hairpin. We further present practical guidelines for setting up and running an AWH simulation.

  4. RELAP-7 User's Guide

    SciTech Connect (OSTI)

    Zhang, Hongbin; Zhao, Haihua; Zou, Ling; Andrs, David; Berry, Ray Alden; Martineau, Richard Charles

    2014-12-01

    The document contains a user's guide on how to run the RELAP-7 code. The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory. RELAP-7 will become the main reactor systems simulation toolkit for the LWRS (Light Water Reactor Sustainability) program’s RISMC (Risk Informed Safety Margin Characterization) effort and the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 is written with object oriented programming language C++. A number of example problems and their associated input files are presented in this document to guide users to run the RELAP-7 code starting with simple pipe problems to problems with increasing complexity.

  5. Project Reach Completes Photographic Work in Room 7, Panel 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photographic Work in Room 7, Panel 7 Photographic work in support of the Accident Investigation Board (AIB) has been completed in Room 7 Panel 7, the location of the February ...

  6. Predicting objective function weights from patient anatomy in prostate IMRT treatment planning

    SciTech Connect (OSTI)

    Lee, Taewoo Hammad, Muhannad; Chan, Timothy C. Y.; Techna Institute for the Advancement of Technology for Health, 124-100 College Street, Toronto, Ontario M5G 1P5 ; Craig, Tim; Department of Radiation Oncology, University of Toronto, 148-150 College Street, Toronto, Ontario M5S 3S2 ; Sharpe, Michael B.; Department of Radiation Oncology, University of Toronto, 148-150 College Street, Toronto, Ontario M5S 3S2; Techna Institute for the Advancement of Technology for Health, 124-100 College Street Toronto, Ontario M5G 1P5

    2013-12-15

    Purpose: Intensity-modulated radiation therapy (IMRT) treatment planning typically combines multiple criteria into a single objective function by taking a weighted sum. The authors propose a statistical model that predicts objective function weights from patient anatomy for prostate IMRT treatment planning. This study provides a proof of concept for geometry-driven weight determination. Methods: A previously developed inverse optimization method (IOM) was used to generate optimal objective function weights for 24 patients using their historical treatment plans (i.e., dose distributions). These IOM weights were around 1% for each of the femoral heads, while bladder and rectum weights varied greatly between patients. A regression model was developed to predict a patient's rectum weight using the ratio of the overlap volume of the rectum and bladder with the planning target volume at a 1 cm expansion as the independent variable. The femoral head weights were fixed to 1% each and the bladder weight was calculated as one minus the rectum and femoral head weights. The model was validated using leave-one-out cross validation. Objective values and dose distributions generated through inverse planning using the predicted weights were compared to those generated using the original IOM weights, as well as an average of the IOM weights across all patients. Results: The IOM weight vectors were on average six times closer to the predicted weight vectors than to the average weight vector, usingl{sub 2} distance. Likewise, the bladder and rectum objective values achieved by the predicted weights were more similar to the objective values achieved by the IOM weights. The difference in objective value performance between the predicted and average weights was statistically significant according to a one-sided sign test. For all patients, the difference in rectum V54.3 Gy, rectum V70.0 Gy, bladder V54.3 Gy, and bladder V70.0 Gy values between the dose distributions generated by the predicted weights and IOM weights was less than 5 percentage points. Similarly, the difference in femoral head V54.3 Gy values between the two dose distributions was less than 5 percentage points for all but one patient. Conclusions: This study demonstrates a proof of concept that patient anatomy can be used to predict appropriate objective function weights for treatment planning. In the long term, such geometry-driven weights may serve as a starting point for iterative treatment plan design or may provide information about the most clinically relevant region of the Pareto surface to explore.

  7. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    9 Table 7.2a Electricity Net Generation: Total (All Sectors) (Sum of Tables 7.2b and 7.2c; Million Kilowatthours) Fossil Fuels Nuclear Electric Power Hydro- electric Pumped Storage e Renewable Energy Total j Coal a Petro- leum b Natural Gas c Other Gases d Conven- tional Hydro- electric Power f Biomass Geo- thermal Solar/ PV i Wind Wood g Waste h 1950 Total .............. 154,520 33,734 44,559 NA 0 f ( ) 100,885 390 NA NA NA NA 334,088 1955 Total .............. 301,363 37,138 95,285 NA 0 f ( )

  8. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Table 7.3a Consumption of Combustible Fuels for Electricity Generation: Total (All Sectors) (Sum of Tables 7.3b and 7.3c) Coal a Petroleum Natural Gas f Other Gases g Biomass Other j Distillate Fuel Oil b Residual Fuel Oil c Other Liquids d Petroleum Coke e Total e Wood h Waste i Thousand Short Tons Thousand Barrels Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1950 Total .................... 91,871 5,423 69,998 NA NA 75,421 629 NA 5 NA NA 1955 Total ....................

  9. Synthesis of high molecular weight PEO using non-metal initiators

    DOE Patents [OSTI]

    Yang, Jin; Sivanandan, Kulandaivelu; Pistorino, Jonathan; Eitouni, Hany Basam

    2015-05-19

    A new synthetic method to prepare high molecular weight poly(ethylene oxide) with a very narrow molecular weight distribution (PDI<1.5) is described. The method involves a metal free initiator system, thus avoiding dangerous, flammable organometallic compounds.

  10. 23 V.S.A. Section 1392 Gross Weight Limits on Highways | Open...

    Open Energy Info (EERE)

    Section 1392 Gross Weight Limits on HighwaysLegal Abstract Statute establishes the motor vehicle weight, load size, not to exceed 80,000 pounds without a permit. Published NA...

  11. Apparatus and method of determining molecular weight of large molecules

    DOE Patents [OSTI]

    Fuerstenau, Stephen; Benner, W. Henry; Madden, Norman; Searles, William

    1998-01-01

    A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e.sup.- are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation.

  12. Apparatus and method of determining molecular weight of large molecules

    DOE Patents [OSTI]

    Fuerstenau, S.; Benner, W.H.; Madden, N.M.; Searles, W.

    1998-06-23

    A mass spectrometer determines the mass of multiply charged high molecular weight molecules. This spectrometer utilizes an ion detector which is capable of simultaneously measuring the charge z and transit time of a single ion as it passes through the detector. From this transit time, the velocity of the single ion may then be derived, thus providing the mass-to-charge ratio m/z for a single ion which has been accelerated through a known potential. Given z and m/z, the mass m of the single ion can then be calculated. Electrospray ions with masses in excess of 1 MDa and charge numbers greater than 425 e{sup {minus}} are readily detected. The on-axis single ion detection configuration enables a duty cycle of nearly 100% and extends the practical application of electrospray mass spectrometry to the analysis of very large molecules with relatively inexpensive instrumentation. 14 figs.

  13. Synthesis of high molecular weight PEO using non-metal initiators (Patent)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Synthesis of high molecular weight PEO using non-metal initiators Citation Details In-Document Search Title: Synthesis of high molecular weight PEO using non-metal initiators A new synthetic method to prepare high molecular weight poly(ethylene oxide) with a very narrow molecular weight distribution (PDI<1.5) is described. The method involves a metal free initiator system, thus avoiding dangerous, flammable organometallic compounds. Authors: Yang, Jin ; Sivanandan,

  14. Chapter 7 - Glossary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7-1 CHAPTER 7 GLOSSARY actinide The 15 chemical elements with atomic numbers 89 to 103, inclusively. The group consists of actinium, thorium, protactinium, uranium, neptunium, plutonium, americium, curium, berkelium, californium, einsteinium, fermium, mendelevium, nobelium, and lawrencium. Actinide Source-Term Waste Test Program (STTP) Program designed to measure time-dependent concentrations of actinide elements from actual, contact-handled transuranic waste immersed in brines that are

  15. Diffusion-Weighted Magnetic Resonance Imaging in Monitoring Rectal Cancer Response to Neoadjuvant Chemoradiotherapy

    SciTech Connect (OSTI)

    Barbaro, Brunella; Vitale, Renata; Valentini, Vincenzo; Illuminati, Sonia; Vecchio, Fabio M.; Rizzo, Gianluca; Gambacorta, Maria Antonietta; Coco, Claudio; Crucitti, Antonio; Persiani, Roberto; Sofo, Luigi; Bonomo, Lorenzo

    2012-06-01

    Purpose: To prospectively monitor the response in patients with locally advanced nonmucinous rectal cancer after chemoradiotherapy (CRT) using diffusion-weighted magnetic resonance imaging. The histopathologic finding was the reference standard. Methods and Materials: The institutional review board approved the present study. A total of 62 patients (43 men and 19 women; mean age, 64 years; range, 28-83) provided informed consent. T{sub 2}- and diffusion-weighted magnetic resonance imaging scans (b value, 0 and 1,000 mm{sup 2}/s) were acquired before, during (mean 12 days), and 6-8 weeks after CRT. We compared the median apparent diffusion coefficients (ADCs) between responders and nonresponders and examined the associations with the Mandard tumor regression grade (TRG). The postoperative nodal status (ypN) was evaluated. The Mann-Whitney/Wilcoxon two-sample test was used to evaluate the relationships among the pretherapy ADCs, extramural vascular invasion, early percentage of increases in ADCs, and preoperative ADCs. Results: Low pretreatment ADCs (<1.0 Multiplication-Sign 10{sup -3}mm{sup 2}/s) were correlated with TRG 4 scores (p = .0011) and associated to extramural vascular invasion with ypN+ (85.7% positive predictive value for ypN+). During treatment, the mean percentage of increase in tumor ADC was significantly greater in the responders than in the nonresponders (p < .0001) and a >23% ADC increase had a 96.3% negative predictive value for TRG 4. In 9 of 16 complete responders, CRT-related tumor downsizing prevented ADC evaluations. The preoperative ADCs were significantly different (p = .0012) between the patients with and without downstaging (preoperative ADC {>=}1.4 Multiplication-Sign 10{sup -3}mm{sup 2}/s showed a positive and negative predictive value of 78.9% and 61.8%, respectively, for response assessment). The TRG 1 and TRG 2-4 groups were not significantly different. Conclusion: Diffusion-weighted magnetic resonance imaging seems to be a promising tool for monitoring the response to CRT.

  16. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    4 U.S. Energy Information Administration / Monthly Energy Review May 2016 Table 7.3b Consumption of Combustible Fuels for Electricity Generation: Electric Power Sector (Subset of Table 7.3a) Coal a Petroleum Natural Gas f Other Gases g Biomass Other j Distillate Fuel Oil b Residual Fuel Oil c Other Liquids d Petroleum Coke e Total e Wood h Waste i Thousand Short Tons Thousand Barrels Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1950 Total .................... 91,871 5,423

  17. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Table 7.3c Consumption of Selected Combustible Fuels for Electricity Generation: Commercial and Industrial Sectors (Subset of Table 7.3a) Commercial Sector a Industrial Sector b Coal c Petroleum d Natural Gas e Biomass Coal c Petroleum d Natural Gas e Other Gases g Biomass Other i Waste f Wood h Waste f Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1990 Total .................... 417 953 28 15 10,740

  18. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    8 U.S. Energy Information Administration / Monthly Energy Review May 2016 Table 7.4b Consumption of Combustible Fuels for Electricity Generation and Useful Thermal Output: Electric Power Sector (Subset of Table 7.4a) Coal a Petroleum Natural Gas f Other Gases g Biomass Other j Distillate Fuel Oil b Residual Fuel Oil c Other Liquids d Petroleum Coke e Total e Wood h Waste i Thousand Short Tons Thousand Barrels Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1950 Total

  19. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    19 Table 7.4c Consumption of Selected Combustible Fuels for Electricity Generation and Useful Thermal Output: Commercial and Industrial Sectors (Subset of Table 7.4a) Commercial Sector a Industrial Sector b Coal c Petroleum d Natural Gas e Biomass Coal c Petroleum d Natural Gas e Other Gases g Biomass Other i Waste f Wood h Waste f Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu Thousand Short Tons Thousand Barrels Billion Cubic Feet Trillion Btu 1990 Total

  20. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Table 7.1 Electricity Overview (Billion Kilowatthours) Net Generation a Trade T&D Losses f and Unaccounted for g End Use Electric Power Sector b Com- mercial Sector c Indus- trial Sector d Total Imports e Exports e Net Imports e Retail Sales h Direct Use i Total 1950 Total .................... 329 NA 5 334 2 (s) 2 44 291 NA 291 1955 Total .................... 547 NA 3 550 5 (s) 4 58 497 NA 497 1960 Total .................... 756 NA 4 759 5 1 5 76 688 NA 688 1965 Total ....................

  1. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    0 U.S. Energy Information Administration / Monthly Energy Review May 2016 Table 7.2b Electricity Net Generation: Electric Power Sector (Subset of Table 7.2a; Million Kilowatthours) Fossil Fuels Nuclear Electric Power Hydro- electric Pumped Storage e Renewable Energy Total j Coal a Petro- leum b Natural Gas c Other Gases d Conven- tional Hydro- electric Power f Biomass Geo- thermal Solar/ PV i Wind Wood g Waste h 1950 Total .............. 154,520 33,734 44,559 NA 0 f ( ) 95,938 390 NA NA NA NA

  2. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    1 Table 7.2c Electricity Net Generation: Commercial and Industrial Sectors (Subset of Table 7.2a; Million Kilowatthours) Commercial Sector a Industrial Sector b Coal c Petro- leum d Natural Gas e Biomass Total g Coal c Petro- leum d Natural Gas e Other Gases h Hydro- electric Power i Biomass Total k Waste f Wood j Waste f 1950 Total .................... NA NA NA NA NA NA NA NA NA 4,946 NA NA 4,946 1955 Total .................... NA NA NA NA NA NA NA NA NA 3,261 NA NA 3,261 1960 Total

  3. Light-Weight Radioisotope Heater Unit (LWRHU) sequential impact tests

    SciTech Connect (OSTI)

    Reimus, M.A.H.; Rinehart, G.H.

    1997-08-01

    The light-weight radioisotope heater unit (LWRHU) is a {sup 238}PuO{sub 2}-fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. Los Alamos National Laboratory designed, fabricated, and safety tested the LWRHU. The heat source consists of a hot-pressed {sup 238}PuO{sub 2} fuel pellet, a Pt-30Rh vented capsule, a pyrolytic graphite insulator, and a fineweave-pierced fabric graphite aeroshell assembly. A series of sequential impacts tests using simulant-fueled LWRHU capsules was recently conducted to determine a failure threshold. Sequential impacting, in both end-on and side-on orientations, resulted in increased damage with each subsequent impact. Although the tests were conducted until the aeroshells were sufficiently distorted to be out of dimensional specification, the simulant-fueled capsules used in these tests were not severely deformed. Sequential impacting of the LWRHU appears to result in slightly greater damage than a single impact at the final impact velocity of 50 m/s. Postimpact examination revealed that the sequentially impacted capsules were slightly more deformed and were outside of dimensional specifications.

  4. FY 2005 Volume 7

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8 Volume 7 Interior & Related Agencies Interior & Related Agencies Fossil Energy Research & Development Fossil Energy Research & Development Naval Petroleum & Oil Shale Reserves Naval Petroleum & Oil Shale Reserves Elk Hills School Lands Fund Elk Hills School Lands Fund Energy Conservation Energy Conservation Economic Regulation Economic Regulation Strategic Petroleum Reserve Strategic Petroleum Reserve Energy Information Administration Energy Information Administration

  5. 7Be General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Be General Table The General Table for 7Be is subdivided into the following categories: Reviews Experimental Work Shell Model Cluster Model Other Theoretical Work Model Calculations Projectile Fragmentation and Multifragmentation Astrophysical b Decay Astrophysical Neutrinos Hypernuclei, Mesons and Other Exotic Particles Applications

  6. 7Li General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Li General Table The General Table for 7Li is subdivided into the following categories: Reviews Ground State Properties Shell Model Cluster Model Other Theoretical Work Model Calculations Photodisintegration Polarization Fission and Fusion Elastic and Inelastic Scattering Projectile Fragmentation and Multifragmentation Astrophysical Hyperfine Structure b-decay Muons Hypernuclei and Mesons Hypernuclei and Baryons Pion, Kaon and Eta-Mesons Other Work Applications

  7. RELAP-7 Development Updates

    SciTech Connect (OSTI)

    Zhang, Hongbin; Zhao, Haihua; Gleicher, Frederick Nathan; DeHart, Mark David; Zou, Ling; Andrs, David; Martineau, Richard Charles

    2015-09-01

    RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory, and is the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 development began in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway of the Light Water Reactor Sustainability (LWRS) program. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. The code is being developed based on Idaho National Laboratory’s modern scientific software development framework – MOOSE (the Multi-Physics Object-Oriented Simulation Environment). The initial development goal of the RELAP-7 approach focused primarily on the development of an implicit algorithm capable of strong (nonlinear) coupling of the dependent hydrodynamic variables contained in the 1-D/2-D flow models with the various 0-D system reactor components that compose various boiling water reactor (BWR) and pressurized water reactor nuclear power plants (NPPs). During Fiscal Year (FY) 2015, the RELAP-7 code has been further improved with expanded capability to support boiling water reactor (BWR) and pressurized water reactor NPPs analysis. The accumulator model has been developed. The code has also been coupled with other MOOSE-based applications such as neutronics code RattleSnake and fuel performance code BISON to perform multiphysics analysis. A major design requirement for the implicit algorithm in RELAP-7 is that it is capable of second-order discretization accuracy in both space and time, which eliminates the traditional first-order approximation errors. The second-order temporal is achieved by a second-order backward temporal difference, and the one-dimensional second-order accurate spatial discretization is achieved with the Galerkin approximation of Lagrange finite elements. During FY-2015, we have done numerical verification work to verify that the RELAP-7 code indeed achieves 2nd-order accuracy in both time and space for single phase models at the system level.

  8. Fetal weight at term influenced by H-2-associated loci

    SciTech Connect (OSTI)

    Tyan, M.L.

    1994-01-01

    Pregnant mice which in theory differ only in the region of the major histocompatibility complex (MHC) on chromosome 17 (C57BL/10, the inbred partner [host strain], and B10.D2, B10.BR, BI0.A, B10.A[2R], Bl0.A[5R], B10.A[15R] and B10.A[18R]) were sacrificed on the 11th and 18th days of gestation, and the fetuses were sexed and weighed. Fetuses from reciprocal crosses between B10.A and B10BR, B10.D2 and C57BL/10 were weighed and sexed on the 18th day of gestation. It was found that (i) fetal weights were not significantly different among the strains examined on day 11 (Bl0.BR, B10.A[15R] and B10.A[18R]), (ii) B10.BR fetuses of both sexes weighed significantly less than fetuses from the other strains on day 18, (iii) B10.D2 18-day-old male but not female fetuses were heavier than the males from the other strains (this difference was not present when corrections for litter size were made), (iv) the fetuses from the B10.A x B10.BR cross were the smallest, those from the B10.D2 x 810.A cross the largest, and those from the B10.A x C57BL/10 crosses intermediate, and (v) maternal effects were noted In the B10.A x B10.BR and B10.A x B10.D2 but not the B10.A x C57BL/10 crosses. The results suggest that there are two or more MHC associated loci that influence growth rate in late gestation. Among the candidate genes are Ped and Igfr II. 17 refs., 4 tabs.

  9. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    Note 1. Coverage of Electricity Statistics. Data in Section 7 cover the following: Through 1984, data for electric utilities also include institu- tions (such as universities) and military facilities that gener- ated electricity primarily for their own use; beginning in 1985, data for electric utilities exclude institutions and military facilities. Beginning in 1989, data for the commercial sector include institutions and military facilities. The generation, consumption, and stocks data in

  10. Semi-automatic delineation using weighted CT-MRI registered images...

    Office of Scientific and Technical Information (OSTI)

    cancer Citation Details In-Document Search Title: Semi-automatic delineation using weighted CT-MRI registered images for radiotherapy of nasopharyngeal cancer Purpose: ...

  11. XP-SiC: An Innovative Substrate for Future Applications with Low Weight and High Porosity

    Broader source: Energy.gov [DOE]

    4To develop a substrate with high porosity, low weight and low cost to fulfill the requirements and challenges for current and future soot emission legislations

  12. Impact of Weight Change During the Course of Concurrent Chemoradiation Therapy on Outcomes in Stage IIIB Non-Small Cell Lung Cancer Patients: Retrospective Analysis of 425 Patients

    SciTech Connect (OSTI)

    Topkan, Erkan; Parlak, Cem; Selek, Ugur

    2013-11-15

    Purpose: We retrospectively investigated the impact of weight change (WC) during concurrent chemoradiation therapy (C-CRT) on clinical outcomes of stage 3B non-small cell lung cancer (NSCLC) patients. Methods and Materials: A total of 425 patients treated with C-CRT were included. All patients received 60 to 66 Gy of thoracic radiation therapy concurrently with 1 to 3 cycles of platinum-based chemotherapy. Pre- and posttreatment weight measurements on first and last days of C-CRT were used for WC. Patients were divided into 2 groups: group 1 = weight loss (WL); group 2 = weight preservation/gain (WP) for comparative analyses. Results: Following C-CRT, 252 patients (59.3%) experienced WL, while 89 patients (20.9%) and 84 patients (19.8%) showed WP or WG. At median 24.2 months of follow-up, 142 patients (33.4%) were alive (84 WP [48.6%] and 58 WL [23.0%]), and 58 (13.6%) of them were free of disease progression (41 [23.7%] for WP and 17 [6.7%] for WL). Median overall survival (OS), locoregional progression-free survival (LRPFS), progression-free survival (PFS), and distant metastases-free survival (DMFS) for the entire population were 22.8, 14.4, 10.6, and 11.7 months, respectively. Intergroup comparisons between WP and WL cohorts revealed significantly superior OS, LRPFS, PFS, and DMFS in WP patients (P<.05 for each). On multivariate analyses, only WL and advanced T stage were associated with poor prognosis (P<.05). Conclusions: Present results in 425 stage 3B NSCLC patients demonstrated that WL during C-CRT is strongly associated with inferior survival outcomes compared to WP. This emerging finding might be useful by forming an encouraging basis for future investigations in facilitating a way to improve the outcomes of these patients experiencing WL during C-CRT.

  13. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    . Electricity Figure 7.1 Electricity Overview (Billion Kilowatthours) Overview, 2015 Net Generation a by Sector, 1989-2015 Net Generation a by Sector, Monthly Trade, 1949-2015 106 U.S. Energy Information Administration / Monthly Energy Review May 2016 Electric Power Total d Imports Exports 3,931 13 144 76 9 3,725 139 Electric Commercial Industrial Imports Exports Retail Direct 0 1,000 2,000 3,000 4,000 5,000 End Use Net Generation a Trade Sales b Use c Power 1990 1995 2000 2005 2010 2015 0 1,000

  14. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    21 Table 7.5 Stocks of Coal and Petroleum: Electric Power Sector Coal a Petroleum Distillate Fuel Oil b Residual Fuel Oil c Other Liquids d Petroleum Coke e Total e,f Thousand Short Tons Thousand Barrels Thousand Short Tons Thousand Barrels 1950 Year ............................. 31,842 NA NA NA NA 10,201 1955 Year ............................. 41,391 NA NA NA NA 13,671 1960 Year ............................. 51,735 NA NA NA NA 19,572 1965 Year ............................. 54,525 NA NA NA NA

  15. Word Pro - S7

    U.S. Energy Information Administration (EIA) Indexed Site

    23 Table 7.6 Electricity End Use (Million Kilowatthours) Retail Sales a Direct Use f Total End Use g Discontinued Retail Sales Series Residential Commercial b Industrial c Transpor- tation d Total Retail Sales e Commercial (Old) h Other (Old) i 1950 Total .................... 72,200 E 65,971 146,479 E 6,793 291,443 NA 291,443 50,637 22,127 1955 Total .................... 128,401 E 102,547 259,974 E 5,826 496,748 NA 496,748 79,389 28,984 1960 Total .................... 201,463 E 159,144 324,402 E

  16. Appendix B-7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 STANDARD TERMS AND CONDITIONS FOR (1) CONSULTANTS, AND (2) TECHNICAL SERVICES (Where Service Contract Act Does Not Apply) JULY 11, 2014 Subcontractor is hereby on notice that the contracting party to this subcontract is the Alliance for Sustainable Energy, LLC, in its capacity as the Managing and Operating Contractor for the National Renewable Energy Laboratory (NREL) under U.S. Department No. DE-AC36-08GO28308. All references to "NREL" in this subcontract shall mean the Alliance for

  17. Wear Measurement of Highly Cross-linked UHMWPE using a 7Be Tracer

    Office of Scientific and Technical Information (OSTI)

    Implantation Technique (Journal Article) | SciTech Connect Wear Measurement of Highly Cross-linked UHMWPE using a 7Be Tracer Implantation Technique Citation Details In-Document Search Title: Wear Measurement of Highly Cross-linked UHMWPE using a 7Be Tracer Implantation Technique The very low wear rates achieved with the current highly cross-linked ultrahigh molecular weight polyethylenes (UHMWPE) used in joint prostheses have proven to be difficult to measure accurately by gravimetry. Tracer

  18. Development of the laser isotope separation method (AVLIS) for obtaining weight amounts of highly enriched {sup 150}Nd isotope

    SciTech Connect (OSTI)

    Babichev, A P; Grigoriev, Igor' S; Grigoriev, A I; Dorovskii, A P; D'yachkov, Aleksei B; Kovalevich, S K; Kochetov, V A; Kuznetsov, V A; Labozin, Valerii P; Matrakhov, A V; Mironov, Sergei M; Nikulin, Sergei A; Pesnya, A V; Timofeev, N I; Firsov, Valerii A; Tsvetkov, G O; Shatalova, G G

    2005-10-31

    Results obtained at the first stage of development of the experimental technique for obtaining weight amounts of the highly enriched {sup 150}Nd isotope by laser photoionisation are presented. The vaporiser and the laser are designed, and various methods of irradiation of neodymium vapour and extraction of photoions are tested. The product yield {approx}40 mg h{sup -1} for the {approx}60% enrichment and 25 mg h{sup -1} for the {approx}65% enrichment is achieved for a vaporiser of length 27 cm. The cost of constructing the facility for preparing 50 kg of the {sup 150}Nd isotope, intended for determining the neutrino mass, is estimated. This estimate shows that the cost of production can be lowered by a factor of 5-7 compared to the electromagnetic method. (invited paper)

  19. Propensity-Weighted Comparison of Long-Term Risk of Urinary Adverse Events in Elderly Women Treated For Cervical Cancer

    SciTech Connect (OSTI)

    Elliott, Sean P.; Fan, Yunhua; Jarosek, Stephanie; Chu, Haitao; Downs, Levi; Dusenbery, Kathryn; Geller, Melissa A.; Virnig, Beth A.

    2015-07-01

    Purpose: Cervical cancer treatment is associated with a risk of urinary adverse events (UAEs) such as ureteral stricture and vesicovaginal fistula. We sought to measure the long-term UAE risk after surgery and radiation therapy (RT), with confounding controlled through propensity-weighted models. Methods and Materials: From the Surveillance, Epidemiology, and End Results (SEER)-Medicare database, we identified women ≥66 years old with nonmetastatic cervical cancer treated with simple surgery (SS), radical hysterectomy (RH), external beam RT plus brachytherapy (EBRT+BT), or RT+surgery. We matched them to noncancer controls 1:3. Differences in demographic and cancer characteristics were balanced by propensity weighting. Grade 3 to 4 UAEs were identified by diagnosis codes plus treatment codes. Cumulative incidence was measured using Kaplan-Meier methods. The hazard associated with different cancer treatments was compared using Cox models. Results: UAEs occurred in 272 of 1808 cases (17%) and 222 of 5424 (4%) controls; most (62%) were ureteral strictures. The raw cumulative incidence of UAEs was highest in advanced cancers. UAEs occurred in 31% of patients after EBRT+BT, 25% of patients after RT+surgery, and 15% of patients after RH; however, after propensity weighting, the incidence was similar. In adjusted Cox models (reference = controls), the UAE risk was highest after RT+surgery (hazard ratio [HR], 5.07; 95% confidence interval [CI], 2.32-11.07), followed by EBRT+BT (HR, 3.33; 95% CI, 1.45-7.65), RH (HR, 3.65; 95% CI, 1.41-9.46) and SS (HR, 0.99; 95% CI, 0.32-3.01). The higher risk after RT+surgery versus EBRT+BT was statistically significant, whereas, EBRT+BT and RH were not significantly different from each other. Conclusions: UAEs are common after cervical cancer treatment, particularly in patients with advanced cancers. UAEs are more common after RT, but these women tend to have the advanced cancers. After propensity weighting, the risk after RT was similar to that after surgery.

  20. 7 Energy Literacy Principles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Energy Literacy Principles 7 Energy Literacy Principles 7 Energy Literacy Principles File sevenprinciplesslide.pptx More Documents & Publications Energy Literacy 7 Energy ...

  1. Energy Literacy Essential Principle #7

    SciTech Connect (OSTI)

    2015-03-11

    Energy Literacy Essential Principle #7: The quality of life of individuals and societies is affected by energy choices.

  2. Microsoft Word - Part 7.doc

    Office of Environmental Management (EM)

    7 Page 7-1 of 6 PART 7 - POST-CLOSURE CARE PLAN 7.1. OVERVIEW This Part specifies the post-closure care requirements for the WIPP facility. Post-closure care requirements are applicable to Underground Hazardous Waste Disposal Units (Underground HWDUs) and include requirements for routine inspection and maintenance of the closed panel entry drifts, and air monitoring as required. Post-closure care requirements apply immediately after certification of closure of each Underground HWDU and continue

  3. ARM - Datastreams - goes7ir

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ir Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : GOES7IR GOES-7: infrared, channels 7, 10, 12

  4. ARM - Datastreams - goes7rad

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rad Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : GOES7RAD GOES-7: radiance, channels 7, 10, 12

  5. Light-Weight, Low-Cost, Single-Phase, Liquid-Cooled Cold Plate (Presentation)

    SciTech Connect (OSTI)

    Narumanchi, S.

    2013-07-01

    This presentation, 'Light-Weight, Low-Cost, Single-Phase Liquid-Cooled Cold Plate,' directly addresses program goals of increased power density, specific power, and lower cost of power electronics components through improved thermal management.

  6. Light Weight, Low Cost PEM Fuel Cell Stacks | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Oct. 25, 2006. PDF icon 5cwru.pdf More Documents & Publications Fuel Cell Kickoff Meeting Agenda Light Weight, Low Cost PEM Fuel Cell Stacks Fuel Cell Projects Kickoff Meeting

  7. Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Peer Evaluation PDF icon ape039narumanchi2011p.pdf More Documents & Publications Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate Advanced Liquid Cooling R&D

  8. Fact #620: April 26, 2010 Class 8 Truck Tractor Weight by Component

    Broader source: Energy.gov [DOE]

    A typical class 8 truck tractor weighs about 17,000 lbs. The powertrain is nearly a quarter of the weight (24%) while the truck body structure is 19%.

  9. 23 V.S.A. Section 1400 Permit to Operate in excess of Weight...

    Open Energy Info (EERE)

    HighwaysLegal Abstract Sets forth requirements for issuing permits for operating a motor vehicle in excess of weight and size limits. Published NA Year Signed or Took Effect...

  10. Colorado - C.R.S. 42-4-510, Permits for Excess Size and Weight...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S. 42-4-510, Permits for Excess Size and WeightLegal Abstract Statute regulating...

  11. Colorado - C.R.S. 42-4-510 (3), Permits for Excess Size and Weight...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S. 42-4-510 (3), Permits for Excess Size and WeightLegal Abstract Statute outlining...

  12. Colorado - C.R.S. 42-4-509, Vehicles Weight-Excess Removed |...

    Open Energy Info (EERE)

    Colorado - C.R.S. 42-4-509, Vehicles Weight-Excess Removed Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado - C.R.S....

  13. Semi-automatic delineation using weighted CT-MRI registered images for

    Office of Scientific and Technical Information (OSTI)

    radiotherapy of nasopharyngeal cancer (Journal Article) | SciTech Connect Semi-automatic delineation using weighted CT-MRI registered images for radiotherapy of nasopharyngeal cancer Citation Details In-Document Search Title: Semi-automatic delineation using weighted CT-MRI registered images for radiotherapy of nasopharyngeal cancer Purpose: To develop a delineation tool that refines physician-drawn contours of the gross tumor volume (GTV) in nasopharynx cancer, using combined pixel value

  14. Task-based weights for photon counting spectral x-ray imaging

    SciTech Connect (OSTI)

    Bornefalk, Hans

    2011-11-15

    Purpose: To develop a framework for taking the spatial frequency composition of an imaging task into account when determining optimal bin weight factors for photon counting energy sensitive x-ray systems. A second purpose of the investigation is to evaluate the possible improvement compared to using pixel based weights. Methods: The Fourier based approach of imaging performance and detectability index d' is applied to pulse height discriminating photon counting systems. The dependency of d' on the bin weight factors is made explicit, taking into account both differences in signal and noise transfer characteristics across bins and the spatial frequency dependency of interbin correlations from reabsorbed scatter. Using a simplified model of a specific silicon detector, d' values for a high and a low frequency imaging task are determined for optimal weights and compared to pixel based weights. Results: The method successfully identifies bins where a large point spread function degrades detection of high spatial frequency targets. The method is also successful in determining how to downweigh highly correlated bins. Quantitative predictions for the simplified silicon detector model indicate that improvements in the detectability index when applying task-based weights instead of pixel based weights are small for high frequency targets, but could be in excess of 10% for low frequency tasks where scatter-induced correlation otherwise degrade detectability. Conclusions: The proposed method makes the spatial frequency dependency of complex correlation structures between bins and their effect on the system detective quantum efficiency easier to analyze and allows optimizing bin weights for given imaging tasks. A potential increase in detectability of double digit percents in silicon detector systems operated at typical CT energies (100 kVp) merits further evaluation on a real system. The method is noted to be of higher relevance for silicon detectors than for cadmium (zink) telluride detectors.

  15. NERSC-6/7 Benchmarks

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6/7 Benchmarks NERSC-6/7 Benchmarks The NERSC-6/7 application benchmarks were used in the acquisition process that resulted in the NERSC Cray XE6 ("Hopper") system and the follow on Cray XC30 system ("Edison") . A technical report describing the benchmark programs used in the NERSC-6 acquisition and the science drivers behind them is available here. Last edited: 2016-04-29 11:34:40

  16. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  17. NUG Webinar Nov. 7, 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2013 NUG Webinar Nov. 7, 2013 November 7, 2013 Remote Connection Info https://nersc-training.webex.com/ Attendance: 23 Agenda Edison Update NUG 2014 Annual Usage Group Meeting 2014 NISE Call Coming NERSC Achievement Awards Queue Committee NERSC "Quarterly" Outage Using NERSC's Data Transfer Nodes Additional items and Q&A Downloads NUG-Teleconference-November-2013.pdf | Adobe Acrobat PDF file NUG Webinar Slides for Nov. 7 2013 Last edited: 2013-12-11 12:50:46

  18. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users....

  19. Wind 7 | Open Energy Information

    Open Energy Info (EERE)

    Name: Wind 7 Place: Eckernfoerde, Schleswig-Holstein, Germany Zip: 24340 Sector: Wind energy Product: Eckernfoerde-based company that develops & operates wind power projects in...

  20. TOUGH2/EOS7CA

    Energy Science and Technology Software Center (OSTI)

    003504MLTPL00 EOS7CA Version 1.0: TOUGH2 Module for Gas Migration in Shallow Subsurface Porous Media Systems

  1. Estimation of the weighted CTDI{sub {infinity}} for multislice CT examinations

    SciTech Connect (OSTI)

    Li Xinhua; Zhang Da; Liu, Bob

    2012-02-15

    Purpose: The aim of this study was to examine the variations of CT dose index (CTDI) efficiencies, {epsilon}(CTDI{sub 100})=CTDI{sub 100}/CTDI{sub {infinity}}, with bowtie filters and CT scanner types. Methods: This was an extension of our previous study [Li, Zhang, and Liu, Phys. Med. Biol. 56, 5789-5803 (2011)]. A validated Monte Carlo program was used to calculate {epsilon}(CTDI{sub 100}) on a Siemens Somatom Definition scanner. The {epsilon}(CTDI{sub 100}) dependencies on tube voltages and beam widths were tested in previous studies. The influences of different bowtie filters and CT scanner types were examined in this work. The authors tested the variations of {epsilon}(CTDI{sub 100}) with bowtie filters on the Siemens Definition scanner. The authors also analyzed the published CTDI measurements of four independent studies on five scanners of four models from three manufacturers. Results: On the Siemens Definition scanner, the difference in {epsilon}(CTDI{sub W}) between using the head and body bowtie filters was 2.5% (maximum) in the CT scans of the 32-cm phantom, and 1.7% (maximum) in the CT scans of the 16-cm phantom. Compared with CTDI{sub W}, the weighted CTDI{sub {infinity}} increased by 30.5% (on average) in the 32-cm phantom, and by 20.0% (on average) in the 16-cm phantom. These results were approximately the same for 80-140 kV and 1-40 mm beam widths (4.2% maximum deviation). The differences in {epsilon}(CTDI{sub 100}) between the simulations and the direct measurements of four previous studies were 1.3%-5.0% at the center/periphery of the 16-cm/32-cm phantom (on average). Conclusions: Compared with CTDI{sub vol}, the equilibrium dose for large scan lengths is 30.5% higher in the 32-cm phantom, and is 20.0% higher in the 16-cm phantom. The relative increases are practically independent of tube voltages (80-140 kV), beam widths (up to 4 cm), and the CT scanners covered in this study.

  2. Test plan for the M-100 container model M-101/7A/12/90 Docket 96-43-7A, type A container

    SciTech Connect (OSTI)

    Kelly, D.L.

    1997-05-30

    This document describes the test plan for the M-100 Container, Model M-101/7A/12/90. This packaging system is designed to ship Type A solid, radioactive materials, normal form, Form Nos. 1, 2, and 3. The nominal overall dimensions, including risers, of the M-100 Container are 79 x 54 x 42 inches. The capacity of the container is approximately 89.9 ft. The estimated gross weight of the packaging and contents is 9,000 lb.

  3. ARM - Datastreams - goes7vis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vis Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : GOES7VIS GOES-7: visible channel

  4. 7 Energy Literacy Principles | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Energy Literacy Principles 7 Energy Literacy Principles 7 Energy Literacy Principles File sevenprinciplesslide.pptx More Documents & Publications Energy Literacy Introduction ...

  5. Full-waveform inversion in the time domain with an energy-weighted gradient

    SciTech Connect (OSTI)

    Zhang, Zhigang; Huang, Lianjie; Lin, Youzuo

    2011-01-01

    When applying full-waveform inversion to surface seismic reflection data, one difficulty is that the deep region of the model is usually not reconstructed as well as the shallow region. We develop an energy-weighted gradient method for the time-domain full-waveform inversion to accelerate the convergence rate and improve reconstruction of the entire model without increasing the computational cost. Three different methods can alleviate the problem of poor reconstruction in the deep region of the model: the layer stripping, depth-weighting and pseudo-Hessian schemes. The first two approaches need to subjectively choose stripping depths and weighting functions. The third one scales the gradient with only the forward propagation wavefields from sources. However, the Hessian depends on wavefields from both sources and receivers. Our new energy-weighted method makes use of the energies of both forward and backward propagated wavefields from sources and receivers as weights to compute the gradient. We compare the reconstruction of our new method with those of the conjugate gradient and pseudo-Hessian methods, and demonstrate that our new method significantly improves the reconstruction of both the shallow and deep regions of the model.

  6. Identification of genetic factors that modify motor performance and body weight using Collaborative Cross mice

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mao, Jian -Hua; Langley, Sasha A.; Huang, Yurong; Hang, Michael; Bouchard, Kristofer E.; Celniker, Susan E.; Brown, James B.; Jansson, Janet K.; Karpen, Gary H.; Snijders, Antoine M.

    2015-11-09

    Evidence has emerged that suggests a link between motor deficits, obesity and many neurological disorders. However, the contributing genetic risk factors are poorly understood. Here we used the Collaborative Cross (CC), a large panel of newly inbred mice that captures 90% of the known variation among laboratory mice, to identify the genetic loci controlling rotarod performance and its relationship with body weight in a cohort of 365 mice across 16 CC strains. Body weight and rotarod performance varied widely across CC strains and were significantly negatively correlated. Genetic linkage analysis identified 14 loci that were associated with body weight. However,more » 45 loci affected rotarod performance, seven of which were also associated with body weight, suggesting a strong link at the genetic level. As a result, we show that genes identified in this study overlap significantly with those related to neurological disorders and obesity found in human GWA studies. In conclusion, our results provide a genetic framework for studies of the connection between body weight, the central nervous system and behavior.« less

  7. Sex-specific tissue weighting factors for effective dose equivalent calculations

    SciTech Connect (OSTI)

    Xu, X.G. [Rensselaer Polytechnic Inst., Troy, NY (United States); Reece, W.D. [Texas A& M Univ., College Station, TX (United States)

    1996-01-01

    The effective dose equivalent was defined in the International Commission on Radiological Protection Publication 26 in 1977 and later adopted by the U.S. Nuclear REgulatory Commission. To calculate organ doses and effective dose equivalent for external exposures using Monte Carlo simulations, sex-specific anthropomorphic phantoms and sex-specific weighting factors are always employed. This paper presents detailed mathematical derivation of a set of sex-specific tissue weighting factors and the conditions which the weighting factors must satisfy. Results of effective dose equivalent calculations using female and male phantoms exposed to monoenergetic photon beams of 0.08, 0.3, and 1.0 MeV are provided and compared with results published by other authors using different sex-specific weighting factors and phantoms. The results indicate that females always receive higher effective dose equivalent than males for the photon energies and geometries considered and that some published data may be wrong due to mistakes in deriving the sex-specific weighting factors. 17 refs., 2 figs., 2 tabs.

  8. Identification of genetic factors that modify motor performance and body weight using Collaborative Cross mice

    SciTech Connect (OSTI)

    Mao, Jian -Hua; Langley, Sasha A.; Huang, Yurong; Hang, Michael; Bouchard, Kristofer E.; Celniker, Susan E.; Brown, James B.; Jansson, Janet K.; Karpen, Gary H.; Snijders, Antoine M.

    2015-11-09

    Evidence has emerged that suggests a link between motor deficits, obesity and many neurological disorders. However, the contributing genetic risk factors are poorly understood. Here we used the Collaborative Cross (CC), a large panel of newly inbred mice that captures 90% of the known variation among laboratory mice, to identify the genetic loci controlling rotarod performance and its relationship with body weight in a cohort of 365 mice across 16 CC strains. Body weight and rotarod performance varied widely across CC strains and were significantly negatively correlated. Genetic linkage analysis identified 14 loci that were associated with body weight. However, 45 loci affected rotarod performance, seven of which were also associated with body weight, suggesting a strong link at the genetic level. As a result, we show that genes identified in this study overlap significantly with those related to neurological disorders and obesity found in human GWA studies. In conclusion, our results provide a genetic framework for studies of the connection between body weight, the central nervous system and behavior.

  9. MFT homogeneity study at TNX: Final report on the low weight percent solids concentration

    SciTech Connect (OSTI)

    Jenkins, W.J.

    1993-09-21

    A statistical design and analysis of both elemental analyses and weight percent solids analyses data was utilized to evaluate the MFT homogeneity at low heel levels and low agitator speed at both high and low solids feed concentrations. The homogeneity was also evaluated at both low and high agitator speed at the 6000+ gallons static level. The dynamic level portion of the test simulated feeding the Melter from the MFT to evaluate the uniformity of the solids slurry composition (Frit-PHA-Sludge) entering the melter from the MFT. This final report provides the results and conclusions from the second half of the study, the low weight percent solids concentration portion, as well as a comparison with the results from the first half of the study, the high weight percent solids portion.

  10. Reliable clock estimation using linear weighted fusion based on pairwise broadcast synchronization

    SciTech Connect (OSTI)

    Shi, Xin Zhao, Xiangmo Hui, Fei Ma, Junyan Yang, Lan

    2014-10-06

    Clock synchronization in wireless sensor networks (WSNs) has been studied extensively in recent years and many protocols are put forward based on the point of statistical signal processing, which is an effective way to optimize accuracy. However, the accuracy derived from the statistical data can be improved mainly by sufficient packets exchange, which will consume the limited power resources greatly. In this paper, a reliable clock estimation using linear weighted fusion based on pairwise broadcast synchronization is proposed to optimize sync accuracy without expending additional sync packets. As a contribution, a linear weighted fusion scheme for multiple clock deviations is constructed with the collaborative sensing of clock timestamp. And the fusion weight is defined by the covariance of sync errors for different clock deviations. Extensive simulation results show that the proposed approach can achieve better performance in terms of sync overhead and sync accuracy.

  11. TTW 7-16-09

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2009 WIPP Quick Facts (As of 7-15-09) 7,583 Shipments received since opening (7,335 CH and 248 RH) 61,184 Cubic meters of waste disposed (61,070CH and 114 RH) 116,765 Containers disposed in the underground (116,523 CH and 242 RH) A special thanks to all those who prepared for and assisted with the EMS audit Hardy Bellows Wes Boatwright Leroy Bostick Tom Fabian Ed Flynn Marty Gonzales Ken Hasten James Hedin Bill Jaco Judy Lanier Tom Lichty Willie Most Parrish Roush Craig Suggs Steve Travis

  12. Synthesis of high molecular weight PEO using non-metal initiators (Patent)

    Office of Scientific and Technical Information (OSTI)

    | SciTech Connect Synthesis of high molecular weight PEO using non-metal initiators Citation Details In-Document Search Title: Synthesis of high molecular weight PEO using non-metal initiators × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A

  13. Massachusetts's 7th congressional district: Energy Resources...

    Open Energy Info (EERE)

    Networking Organizations in Massachusetts's 7th congressional district Northeast Energy Efficiency Partnerships, Inc Registered Energy Companies in Massachusetts's 7th...

  14. DOE F 2240.7

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. DEPARTMENT OF ENERGY DOE F 2240.7 (8-88) T R A N S F E R V O U C H E R Voucher No. To: DOE Office ...

  15. d::;":,",:::,, ST. LOUIS.7. MO,

    Office of Legacy Management (LM)

    i ,' CKRODT CHEMICAL d::;":,",:::,, ST. LOUIS.7. MO, PiARCH 14, ,jq;ll MR. H. L. PRICE, ... I AL PERAT I ONS DF MALL- INCKRODT ' CHEMICAL b:ORKS WOULD LIKE TO MAKE.APPLlCATlON ...

  16. RERTR-7 Irradiation Summary Report

    SciTech Connect (OSTI)

    D. M. Perez; M. A. Lillo; G. S. Chang; G. A. Roth; N. E. Woolstenhulme; D. M. Wachs

    2011-12-01

    The Reduced Enrichment for Research and Test Reactor (RERTR) experiment RERTR-7A, was designed to test several modified fuel designs to target fission densities representative of a peak low enriched uranium (LEU) burnup in excess of 90% U-235 at peak experiment power sufficient to generate a peak surface heat flux of approximately 300 W/cm2. The RERTR-7B experiment was designed as a high power test of 'second generation' dispersion fuels at peak experiment power sufficient to generate a surface heat flux on the order of 230 W/cm2.1 The following report summarizes the life of the RERTR-7A and RERTR-7B experiments through end of irradiation, including as-run neutronic analyses, thermal analyses and hydraulic testing results.

  17. c7a.xls

    Gasoline and Diesel Fuel Update (EIA)

    ... Q Q Q Q 1,451 1,192 Q Q Q Principal Building Activity Education ... Q 143 175 Q 1,384 1,990 Q 103.1 87.7 Food...

  18. NUG Webinar March 7, 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 7, 2013 NUG Webinar March 7, 2013 Agenda Early user experiences on Edison What issues are users reporting and common solutions Feedback from you Email list for users to share experiences on Edison NUG 2013 Summary Update on action items from NUG 2013 Business Meeting NUGEX/NERSC Committee for soliciting nominees & selecting 2014 NERSC achievement swards Scheduled outage email reminders Anything else that comes up Downloads NUG-Teleconference-Mar-2013.pdf | Adobe Acrobat PDF file NUG

  19. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  20. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  1. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  2. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  3. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  4. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  5. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  6. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Beamline 7.0.2 Print Tuesday, 20 October 2009 08:45 Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system,

  7. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  8. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  9. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  10. Beamline 7.0.2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0.2 Print Surface and Materials Science, Spectromicroscopy Scientific disciplines: Correlated electron system, materials science Endstations: nanoARPES (nARPES) EmicroARPES (Branchline 7.0.2.1) GENERAL BEAMLINE INFORMATION Operational No Source characteristics 5-cm period undulator (U5) (first, third, and fifth harmonics) Energy range See endstation tables Monochromator See endstation tables Scientific disciplines Correlated electron system, materials science Website Beamline 7:

  11. Reduced weight decontamination formulation for neutralization of chemical and biological warfare agents

    SciTech Connect (OSTI)

    Tucker, Mark D.

    2014-06-03

    A reduced weight DF-200 decontamination formulation that is stable under high temperature storage conditions. The formulation can be pre-packed as an all-dry (i.e., no water) or nearly-dry (i.e., minimal water) three-part kit, with make-up water (the fourth part) being added later in the field at the point of use.

  12. Forecast of Standard Atomic Weights for the Mononuclidic Elements – 2011

    SciTech Connect (OSTI)

    Holden, N.E.; Holden, N.; Holden,N.E.

    2011-07-27

    In this short report, I will provide an early warning about potential changes to the standard atomic weight values for the twenty mononuclidic and the so-called pseudo-mononuclidic ({sup 232}Th and {sup 231}Pa) chemical elements due to the estimated changes in the mass values to be published in the next Atomic Mass Tables within the next two years. There have been many new measurements of atomic masses, since the last published Atomic Mass Table. The Atomic Mass Data Center has released an unpublished version of the present status of the atomic mass values as a private communication. We can not update the Standard Atomic Weight Table at this time based on these unpublished values but we can anticipate how many changes are probably going to be expected in the next few years on the basis of the forthcoming publication of the Atomic Mass Table. I will briefly discuss the procedures that the Atomic Weights Commission used in deriving the recommended Standard Atomic Weight values and their uncertainties from the atomic mass values. I will also discuss some concern raised about a proposed change in the definition of the mole. The definition of the mole is now connected directly to the mass of a {sup 12}C isotope (which is defined as 12 exactly) and to the kilogram. A change in the definition of the mole will probably impact the mass of {sup 12}C.

  13. Revised DOE Acquisition Guide Chapter 15.4-2 Weighted Guidelines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon PF2010-72 Revised DOE AG 15.4-2 Weighted Guidelines; DOE AG 15.4-4 General Guide for Tech Analysis of Cost Proposals for Acq Contracts PDF icon PF2010-72a.pdf PDF icon ...

  14. High strength, light weight Ti-Y composites and method of making same

    DOE Patents [OSTI]

    Verhoeven, John D.; Ellis, Timothy W.; Russell, Alan M.; Jones, Lawrence L.

    1993-04-06

    A high strength, light weight "in-situ" Ti-Y composite is produced by deformation processing a cast body having Ti and Y phase components distributed therein. The composite comprises elongated, ribbon-shaped Ti and Y phase components aligned along an axis of the deformed body.

  15. High strength, light weight Ti-Y composites and method of making same

    DOE Patents [OSTI]

    Verhoeven, J.D.; Ellis, T.W.; Russell, A.M.; Jones, L.L.

    1993-04-06

    A high strength, light weight in-situ'' Ti-Y composite is produced by deformation processing a cast body having Ti and Y phase components distributed therein. The composite comprises elongated, ribbon-shaped Ti and Y phase components aligned along an axis of the deformed body.

  16. Weight optimization of large span steel truss structures with genetic algorithm

    SciTech Connect (OSTI)

    Mojolic, Cristian; Hulea, Radu; Pârv, Bianca Roxana

    2015-03-10

    The paper presents the weight optimization process of the main steel truss that supports the Slatina Sport Hall roof. The structure was loaded with self-weight, dead loads, live loads, snow, wind and temperature, grouped in eleven load cases. The optimization of the structure was made using genetic algorithms implemented in a Matlab code. A total number of four different cases were taken into consideration when trying to determine the lowest weight of the structure, depending on the types of connections with the concrete structure ( types of supports, bearing modes), and the possibility of the lower truss chord nodes to change their vertical position. A number of restrictions for tension, maximum displacement and buckling were enforced on the elements, and the cross sections are chosen by the program from a user data base. The results in each of the four cases were analyzed in terms of weight, element tension, element section and displacement. The paper presents the optimization process and the conclusions drawn.

  17. Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon ape039_narumanchi_2012_o.pdf More Documents & Publications Advanced Liquid Cooling R&D Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate

  18. Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate | Department

    Broader source: Energy.gov (indexed) [DOE]

    of Energy ape039_narumanchi_2011_p.pdf More Documents & Publications Compact, Light-Weight, Single-Phase, Liquid-Cooled Cold Plate Advanced Liquid Cooling R&D Air Cooling Technology for Power Electronic Thermal Control

  19. Blood lead level association with lower body weight in NHANES 1999–2006

    SciTech Connect (OSTI)

    Scinicariello, Franco; Buser, Melanie C.; Mevissen, Meike; Portier, Christopher J.

    2013-12-15

    Background: Lead exposure is associated with low birth-weight. The objective of this study is to determine whether lead exposure is associated with lower body weight in children, adolescents and adults. Methods: We analyzed data from NHANES 1999–2006 for participants aged ≥ 3 using multiple logistic and multivariate linear regression. Using age- and sex-standardized BMI Z-scores, overweight and obese children (ages 3–19) were classified by BMI ≥ 85th and ≥ 95th percentiles, respectively. The adult population (age ≥ 20) was classified as overweight and obese with BMI measures of 25–29.9 and ≥ 30, respectively. Blood lead level (BLL) was categorized by weighted quartiles. Results: Multivariate linear regressions revealed a lower BMI Z-score in children and adolescents when the highest lead quartile was compared to the lowest lead quartile (β (SE) = − 0.33 (0.07), p < 0.001), and a decreased BMI in adults (β (SE) = − 2.58 (0.25), p < 0.001). Multiple logistic analyses in children and adolescents found a negative association between BLL and the percentage of obese and overweight with BLL in the highest quartile compared to the lowest quartile (OR = 0.42, 95% CI: 0.30–0.59; and OR = 0.67, 95% CI: 0.52–0.88, respectively). Adults in the highest lead quartile were less likely to be obese (OR = 0.42, 95% CI: 0.35–0.50) compared to those in the lowest lead quartile. Further analyses with blood lead as restricted cubic splines, confirmed the dose-relationship between blood lead and body weight outcomes. Conclusions: BLLs are associated with lower body mass index and obesity in children, adolescents and adults. - Highlights: • NHANES analysis of BLL and body weight outcomes • Increased BLL associated with decreased body weight in children and adolescent • Increased BLL associated with decreased body weight in adults.

  20. Buildings Energy Data Book: 7.7 Water Use Standards

    Buildings Energy Data Book [EERE]

    Water Use Standards March 2012 7.7.1 Water Use Standards for Faucets, Showerheads, and Prerinse Spray Valves (1) Faucet Type (2) Maximum Flow Rate Kitchen Faucets (3) 2.2 gpm Lavatory Replacement Aerators 2.2 gpm Kitchen Faucets 2.2 gpm Kitchen Replacement Aerators 2.2 gpm Metering Faucets (4) 0.25 gal/cycle Showerheads (5) 2.5 gpm Commercial Prerinse Spray Valves (6) 1.6 gpm Note(s): Source(s): 1) Effective for products manufactured on or after January 1, 1994. 2) When measured at a flowing

  1. TRU TeamWorks 7-7-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2011 WIPP Quick Facts (As of 7-6-11) 9,730 Shipments received since opening (9,234 CH and 496 RH) 75,969 Cubic meters of waste disposed (75,717 CH and 252 RH) 147,852 Containers disposed in the underground (147,357 CH and 495 RH) DOE completes cleanup at New York, California sites "Cleanup of these two sites represents important and continued progress in the Department of Energy's commitment to reducing the nation's nuclear waste footprint," said Assistant Secretary for

  2. WIPP_Panel_7_Approved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Panel 7 Certified and Ready for Waste Disposal CARLSBAD, N.M., August 1, 2013 - In mid-July 2013, the New Mexico Environment Department (NMED) approved the use of Panel 7 for disposal of defense- related transuranic (TRU) waste at the Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). Approval by NMED for each underground waste disposal panel prior to use is required under the WIPP Hazardous Waste Facility Permit (Permit). A panel consists of seven waste disposal rooms and each room

  3. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Beamline 7.3.3 Print Tuesday, 20 October 2009 08:50 Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC

  4. DOE Form 1332.7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7# COST PLAN OMB Control No. (12-85) 1910-1400 1. TITLE 2. IDENTIFICATION NUMBER 3. PARTICIPANT NAME AND ADDRESS 4. COST PLAN DATE 5. START DATE 6. COMPLETION DATE 7. 8. 9. Plan 10. Actual 11. 12. 13. Sub- 14. Element Reporting Prior Prior sequent Total Code Element Fiscal Fiscal Fiscal Year Year Years CURRENT FISCAL YEAR FUTURE FISCAL YEARS Total 15. TOTAL 16. DOLLARS EXPRESSED IN: 17. SIGNATURE OF PARTICIPANT'S PROJECT MANAGER AND DATE 18. SIGNATURE OF PARTICIPANT'S AUTHORIZED FINANCIAL

  5. Weighted simultaneous algebraic reconstruction technique for tomosynthesis imaging of objects with high-attenuation features

    SciTech Connect (OSTI)

    Levakhina, Y. M.; Mueller, J.; Buzug, T. M.; Duschka, R. L.; Vogt, F.; Barkhausen, J.

    2013-03-15

    Purpose: This paper introduces a nonlinear weighting scheme into the backprojection operation within the simultaneous algebraic reconstruction technique (SART). It is designed for tomosynthesis imaging of objects with high-attenuation features in order to reduce limited angle artifacts. Methods: The algorithm estimates which projections potentially produce artifacts in a voxel. The contribution of those projections into the updating term is reduced. In order to identify those projections automatically, a four-dimensional backprojected space representation is used. Weighting coefficients are calculated based on a dissimilarity measure, evaluated in this space. For each combination of an angular view direction and a voxel position an individual weighting coefficient for the updating term is calculated. Results: The feasibility of the proposed approach is shown based on reconstructions of the following real three-dimensional tomosynthesis datasets: a mammography quality phantom, an apple with metal needles, a dried finger bone in water, and a human hand. Datasets have been acquired with a Siemens Mammomat Inspiration tomosynthesis device and reconstructed using SART with and without suggested weighting. Out-of-focus artifacts are described using line profiles and measured using standard deviation (STD) in the plane and below the plane which contains artifact-causing features. Artifacts distribution in axial direction is measured using an artifact spread function (ASF). The volumes reconstructed with the weighting scheme demonstrate the reduction of out-of-focus artifacts, lower STD (meaning reduction of artifacts), and narrower ASF compared to nonweighted SART reconstruction. It is achieved successfully for different kinds of structures: point-like structures such as phantom features, long structures such as metal needles, and fine structures such as trabecular bone structures. Conclusions: Results indicate the feasibility of the proposed algorithm to reduce typical tomosynthesis artifacts produced by high-attenuation features. The proposed algorithm assigns weighting coefficients automatically and no segmentation or tissue-classification steps are required. The algorithm can be included into various iterative reconstruction algorithms with an additive updating strategy. It can also be extended to computed tomography case with the complete set of angular data.

  6. Buildings Energy Data Book: 5.7 Appliances

    Buildings Energy Data Book [EERE]

    5 Refrigerator-Freezer Sizes and Energy Factors (Shipment-Weighted Averages) Average Volume (cu. ft.) (1) Consumption/Unit (kWh/yr) Best-Available (kWh/yr) 1972 18.2 1726 N.A. 1980 19.6 1278 N.A. 1985 19.5 1058 N.A. 1990 20.5 916 N.A. 1995 20.0 649 555 2000 21.9 704 523 2001 21.9 565 438 2002 22.2 520 428 2003 22.3 514 428 2004 21.5 500 402 2005 20.7 490 417 2006 22.3 506 464 2007 21.9 498 459 2008 21.4 483 N.A. 2009 (2) 21.0 460 334 2010 22.5 462 311 Note(s): Source(s): The average stock energy

  7. ?AMG based on Weighted Matching for Systems of Elliptic PDEs Arising From Displacement and Mixed Methods

    SciTech Connect (OSTI)

    D'Ambra, P.; Vassilevski, P. S.

    2014-05-30

    Adaptive Algebraic Multigrid (or Multilevel) Methods (?AMG) are introduced to improve robustness and efficiency of classical algebraic multigrid methods in dealing with problems where no a-priori knowledge or assumptions on the near-null kernel of the underlined matrix are available. Recently we proposed an adaptive (bootstrap) AMG method, ?AMG, aimed to obtain a composite solver with a desired convergence rate. Each new multigrid component relies on a current (general) smooth vector and exploits pairwise aggregation based on weighted matching in a matrix graph to define a new automatic, general-purpose coarsening process, which we refer to as the compatible weighted matching. In this work, we present results that broaden the applicability of our method to different finite element discretizations of elliptic PDEs. In particular, we consider systems arising from displacement methods in linear elasticity problems and saddle-point systems that appear in the application of the mixed method to Darcy problems.

  8. Effects of fine particulate matter and its constituents on low birth weight among full-term infants in California

    SciTech Connect (OSTI)

    Basu, Rupa; Harris, Maria; Sie, Lillian; Malig, Brian; Broadwin, Rachel; Green, Rochelle

    2014-01-15

    Relationships between prenatal exposure to fine particles (PM{sub 2.5}) and birth weight have been observed previously. Few studies have investigated specific constituents of PM{sub 2.5}, which may identify sources and major contributors of risk. We examined the effects of trimester and full gestational prenatal exposures to PM{sub 2.5} mass and 23 PM{sub 2.5} constituents on birth weight among 646,296 term births in California between 2000 and 2006. We used linear and logistic regression models to assess associations between exposures and birth weight and risk of low birth weight (LBW; <2500 g), respectively. Models were adjusted for individual demographic characteristics, apparent temperature, month and year of birth, region, and socioeconomic indicators. Higher full gestational exposures to PM{sub 2.5} mass and several PM{sub 2.5} constituents were significantly associated with reductions in term birth weight. The largest reductions in birth weight were associated with exposure to vanadium, sulfur, sulfate, iron, elemental carbon, titanium, manganese, bromine, ammonium, zinc, and copper. Several of these PM{sub 2.5} constituents were associated with increased risk of term LBW. Reductions in birth weight were generally larger among younger mothers and varied by race/ethnicity. Exposure to specific constituents of PM{sub 2.5}, especially traffic-related particles, sulfur constituents, and metals, were associated with decreased birth weight in California. -- Highlights: Examine full gestational and trimester fine particle and its constituents on term birth weight. Fine particles and several of its constituents associated with birth weight reductions. Largest reductions for traffic-related particles, sulfur constituents, and metals. Greater birth weight reductions for younger mothers, and varied by race/ethnicity.

  9. Test and evaluation report for Westinghouse Hanford Company`s 1-L liquid shipper, docket 95-41-7A, Type A container

    SciTech Connect (OSTI)

    Kelly, D.L.

    1996-03-13

    This report incorporates the U.S. Department of Energy, Office of Facility Safety Analysis (DOE/EH-32) approval letter for packaging use. This report documents the U.S. Department of Transportation Specification 7A Type A (DOT-7A) compliance test results of the 1-L Liquid Shipper packaging. The approved packaging system is designed to ship Type A quantities of radioactive materials, normal form. Contents may be liquid or solid form. Liquid contents must have a specific gravity {lt}2. Solid materials are limited in weight, to include packaging, to the gross weight of the as-tested liquids and bottles.

  10. Processes for converting methane to higher molecular weight hydrocarbons via sulfur-containing intermediates

    SciTech Connect (OSTI)

    Han, S.; Palermo, R.E.

    1989-09-05

    This patent describes a process for converting methane to higher molecular weight hydrocarbons. The process comprising the steps of contacting methane with carbonyl sulfide in the presence of UV light under conditions sufficient to generate Ch/sub 3/SH; and contacting CH/sub 3/SH with a catalyst under conditions sufficient to produce hydrogen sulfide and a mixture of hydrocarbons having at least two carbon atoms.

  11. Fully Differential Monte-Carlo Generator Dedicated to TMDs and Bessel-Weighted Asymmetries

    SciTech Connect (OSTI)

    Aghasyan, Mher M.; Avakian, Harut A.

    2013-10-01

    We present studies of double longitudinal spin asymmetries in semi-inclusive deep inelastic scattering using a new dedicated Monte Carlo generator, which includes quark intrinsic transverse momentum within the generalized parton model based on the fully differential cross section for the process. Additionally, we apply Bessel-weighting to the simulated events to extract transverse momentum dependent parton distribution functions and also discuss possible uncertainties due to kinematic correlation effects.

  12. Weighted SVD algorithm for close-orbit correction and 10 Hz feedback in RHIC

    SciTech Connect (OSTI)

    Liu C.; Hulsart, R.; Marusic, A.; Michnoff, R.; Minty, M.; Ptitsyn, V.

    2012-05-20

    Measurements of the beam position along an accelerator are typically treated equally using standard SVD-based orbit correction algorithms so distributing the residual errors, modulo the local beta function, equally at the measurement locations. However, sometimes a more stable orbit at select locations is desirable. In this paper, we introduce an algorithm for weighting the beam position measurements to achieve a more stable local orbit. The results of its application to close-orbit correction and 10 Hz orbit feedback are presented.

  13. A=7B (2002TI10)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for 7Li(+, -)7B (1998PA40) were used to deduce information on 7B proton halo features. Measurements at E 30 - 90 MeV reported by (2000DR19) were used to deduce...

  14. A=7H (1974AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (Not illustrated) A search for 7H in 7Li(π-, π+)7H was unsuccessful (1965GI10). See also (1968CE1A

  15. A=7H (1979AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9AJ01) (Not illustrated) A search for 7H in 7Li(π-, π+)7H was unsuccessful (1965GI10). See also (1975BE31, 1977SP1B; theor.

  16. WASTE AREA GROUP 7 PROPOSED PLAN

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AREA GROUP 7 PROPOSED PLAN The Idaho National Laboratory (INL) Citizens Advisory Board (CAB) has provided its input to the Department of Energy on the Waste Area Group 7 (WAG 7)...

  17. Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom

    DOE Patents [OSTI]

    Mattes, Benjamin R.; Wang, Hsing-Lin

    1999-11-09

    Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (between 15% and 30% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

  18. Stable, concentrated solutions of high molecular weight polyaniline and articles therefrom

    DOE Patents [OSTI]

    Mattes, Benjamin R.; Wang, Hsing-Lin

    2000-01-01

    Stable, concentrated solutions of high molecular weight polyaniline. In order to process high quality fibers and other articles possessing good mechanical properties, it is known that solution concentrations of the chosen polymer should be in the range from 15-30% (w/w). Moreover, it is desirable to use the highest molecular weight consistent with the solubility properties of the polymer. However, such solutions are inherently unstable, forming gels before processing can be achieved. The present invention describes the addition gel inhibitors (GIs) to the polymer solution, thereby permitting high concentrations (>15% (w/w)) of high molecular weight ((M.sub.w)>120,000, and (M.sub.n)>30,000) emeraldine base (EB) polyaniline to be dissolved. Secondary amines have been used for this purpose in concentrations which are small compared to those which might otherwise be used in a cosolvent role therefor. The resulting solutions are useful for generating excellent fibers, films, coatings and other objects, since the solutions are stable for significant time periods, and the GIs are present in too small concentrations to cause polymer deterioration. It is demonstrated that the GIs found to be useful do not act as cosolvents, and that gelation times of the solutions are directly proportional to the concentration of GI. In particular, there is a preferred concentration of GI, which if exceeded causes structural and electrical conductivity degradation of resulting articles. Heating of the solutions significantly improves solubility.

  19. Low-cost, low-weight CNG cylinder development. Final report

    SciTech Connect (OSTI)

    Richards, Mark E.; Melford, K.; Wong, J.; Gambone, L.

    1999-09-01

    This program was established to develop and commercialize new high-strength steel-lined, composite hoop-wrapped compressed natural gas (CNG) cylinders for vehicular applications. As much as 70% of the cost of natural gas vehicles can be related to on-board natural gas storage costs. The cost and weight targets for this program represent significant savings in each characteristic when compared to comparable containers available at the initiation of the program. The program objectives were to optimize specific weight and cost goals, yielding CNG cylinders with dimensions that should, allowing for minor modifications, satisfy several vehicle market segments. The optimization process encompassed material, design, and process improvement. In optimizing the CNG cylinder design, due consideration was given to safety aspects relative to national, international, and vehicle manufacturer cylinder standards and requirements. The report details the design and development effort, encompassing plant modifications, material selection, design issues, tooling development, prototype development, and prototype testing. Extenuating circumstances prevented the immediate commercialization of the cylinder designs, though significant progress was made towards improving the cost and performance of CNG cylinders. A new low-cost fiber was successfully employed while the weight target was met and the cost target was missed by less than seven percent.

  20. WIPP UPDATE: April 7, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2014 EPA to install additional air monitors This week, Environmental Protection Agency (EPA) employees will arrive at the Waste Isolation Pilot Plant (WIPP) to install additional air monitors. The monitors will be temporarily placed near existing on- site WIPP air monitors to provide independent monitoring results and verification of WIPP's environmental monitoring network. EPA is also evaluating the number and location of WIPP's current environmental monitors to identify any needed

  1. WIPP UPDATE: October 7, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    October 7, 2014 WIPP's primary hoist begins inspection processes The waste hoist, which is the largest and primary conveyance into the WIPP underground facility, is undergoing the final inspections necessary to return to operation. The conveyance consists of a large enclosed platform, similar to an elevator, that transports people, equipment and waste containers from the surface to the WIPP underground facility. The waste hoist has not been operated since the February 5 fire event because of

  2. Roberson Memorandum - July 7, 2003

    Office of Environmental Management (EM)

    7, 2003 SUBJECT: Revised Guidance for the Office of Environmental Management Site Specific Advisory Boards The purpose of this memorandum is to provide guidance and direction for restructuring and managing the Environmental Management (EM) Site Specific Advisory Boards (SSABs or Boards) procurement mechanisms that support the activities of the Boards. I expect that you will aggressively work towards meeting the requirements provided below,. and implement the changes no later than September 30,

  3. Effect of Weight and Roadway Grade on the Fuel Economy of Class-8 Frieght Trucks

    SciTech Connect (OSTI)

    Franzese, Oscar; Davidson, Diane

    2011-11-01

    In 2006-08, the Oak Ridge National Laboratory, in collaboration with several industry partners, collected real-world performance and situational data for long-haul operations of Class-8 trucks from a fleet engaged in normal freight operations. Such data and information are useful to support Class-8 modeling of combination truck performance, technology evaluation efforts for energy efficiency, and to provide a means of accounting for real-world driving performance within combination truck research and analyses. The present study used the real-world information collected in that project to analyze the effects that vehicle speed and vehicle weight have on the fuel efficiency of Class-8 trucks. The analysis focused on two type of terrains, flat (roadway grades ranging from -1% to 1%) and mild uphill terrains (roadway grades ranging from 1% to 3%), which together covered more than 70% of the miles logged in the 2006-08 project (note: almost 2/3 of the distance traveled on mild uphill terrains was on terrains with 1% to 2% grades). In the flat-terrain case, the results of the study showed that for light and medium loads, fuel efficiency decreases considerably as speed increases. For medium-heavy and heavy loads (total vehicle weight larger than 65,000 lb), fuel efficiency tends to increase as the vehicle speed increases from 55 mph up to about 58-60 mph. For speeds higher than 60 mph, fuel efficiency decreases at an almost constant rate with increasing speed. At any given speed, fuel efficiency decreases and vehicle weight increases, although the relationship between fuel efficiency and vehicle weight is not linear, especially for vehicle weights above 65,000 lb. The analysis of the information collected while the vehicles were traveling on mild upslope terrains showed that the fuel efficiency of Class-8 trucks decreases abruptly with vehicle weight ranging from light loads up to medium-heavy loads. After that, increases in the vehicle weight only decrease fuel efficiency slightly. Fuel efficiency also decreases significantly with speed, but only for light and medium loads. For medium-heavy and heavy, FE is almost constant for speeds ranging from 57 to about 66 mph. For speeds higher than 66 mph, the FE decreases with speed, but at a lower rate than for light and medium loads. Statistical analyses that compared the fuel efficiencies obtained when the vehicles were traveling at 59 mph vs. those achieved when they were traveling at 65 mph or 70 mph indicated that the former were, on average, higher than the latter. This result was statistically significant at the 99.9% confidence level (note: the Type II error i.e., the probability of failing to reject the null hypothesis when the alternative hypothesis is true was 18% and 6%, respectively).

  4. PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7...

    Office of Scientific and Technical Information (OSTI)

    PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7 SOLAR FLARE: EVIDENCE OF ... Title: PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7 SOLAR FLARE: EVIDENCE ...

  5. A=7n (1979AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7n (1979AJ01) (Not illustrated) See (1977DE08).

  6. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  7. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  8. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  9. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  10. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  11. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  12. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  13. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  14. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  15. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  16. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  17. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.3 Print Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC Quantum 4u Spot size at sample 1 mm x 0.8 mm

  18. Beamline 7.3.3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3.3 Beamline 7.3.3 Print Tuesday, 20 October 2009 08:50 Small- and Wide-Angle X-Ray Scattering (SAXS/WAXS/Protein SAXS)* Scientific disciplines: Polymer science, materials science, proteins, surface science GENERAL BEAMLINE INFORMATION Operational Yes Source characteristics Bend magnet Energy range 10 keV Monochromator Mo/B4C double multilayer monochromator Measured flux (1.9 GeV, 400 mA) 1012 photons/s Resolving power (E/ΔE) 100 Detectors Pilatus 1M, Pilatus 100K, Pilatus 300KW, 2x ADSC

  19. LCLS CDR Chapter 7 - Accelerator

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Accelerator TECHNICAL SYNOPSIS In order for the SASE FEL to operate in saturation, a high electron peak current with small transverse and longitudinal emittance is required. The LCLS nominally operates within a range of wavelengths from 15 to 1.5 Å. The most challenging parameters coincide with the 1.5-Å configuration with maximum peak current of 3.4 kA, transverse normalized slice' emittance of 1.2 µm, and top end energy of 14.35 GeV. Since the rf photocathode gun produces 1 nC in a bunch

  20. TTW 3-7-07

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2007 WIPP Quick Facts (As of 3-6-07) 5,521 Shipments received since opening 46,132 Cubic meters of waste disposed 87,518 Containers disposed in the underground Dr. Paul Lisowski, Deputy Assistant Secretary for Fuel Cycle Management, for the DOE's Office of Nuclear Energy, responds to questions from a reporter from KBIM-TV based in Roswell, N.M. GNEP scoping meeting attracts large crowd The Waste Isolation Pilot Plant's safety record was touted at a public scoping meeting Feb. 27 as a major

  1. TTW 7-19-07

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    19, 2007 WIPP Quick Facts (As of 7-18-07) 5,970 Shipments received since opening 49,806 Cubic meters of waste disposed 92,301 Containers disposed in the underground The following is from a news release issued by Bechtel BWXT Idaho earlier today. BBWI sends non-certified drum to WIPP the U.S. Department of Energy (DOE) that they shipped a non-certified drum containing transuranic waste to the Waste Isolation Pilot Plant (WIPP), the Department's nuclear waste repository near Carlsbad, N.M. BBWI

  2. TTW 7-28-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8, 2011 WIPP Quick Facts (As of 7-27-11) 9,780 Shipments received since opening (9,279 CH and 501 RH) 76,334 Cubic meters of waste disposed (76,081 CH and 253 RH) 148,669 Containers disposed in the underground (148,169 CH and 500 RH) CH-TRU waste can be handled by workers without any other additional shielding than the container itself. RH-TRU waste emits more penetrating radiation than CH waste and must be handled and transported in lead-shielded casks. A Panel consists of seven disposal rooms

  3. Beamline 7.3.1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7.3.1 Print Photoemission electron microscope PEEM2 Scientific disciplines: Magnetism, materials, surface science, polymers Note: This beamline is NOT open to general users. GENERAL BEAMLINE INFORMATION Operational Yes, but not open to users Source characteristics Bend magnet Energy range 180-1500 eV Monochromator SGM Calculated flux (1.9 GeV, 400 mA) 3 x 1012 photons/s/0.1%BW at 800 eV (linearly polarized) Resolving power (E/ΔE) 1,000 Endstations Photoemission electron microscope (PEEM2)

  4. ATTACHMENT J.7 - APPENDIX G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-1 ATTACHMENT J.7 APPENDIX G PURCHASING SYSTEM REQUIREMENTS Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-2 Appendix G Purchasing System Requirements This Appendix and Clause I.146 "Contractor Purchasing System," sets forth DOE requirements applicable to the Purchasing System established under the Contract

  5. WIPP UPDATE: May 7, 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7, 2014 Answers to previous Town Hall questions provided A number of questions have been asked at recent Town Hall meetings. Below is information that addresses these questions. Q: Does the public have access to the site to test independently? A: Due to the nature of the work performed, the general public does not have access to the WIPP site. However, in addition to the on-site and off-site monitoring performed by WIPP, the Carlsbad Environmental Monitoring and Research Center conducts

  6. gkm993 1..7

    Office of Scientific and Technical Information (OSTI)

    Nucleic Acids Research, 2007, 1-7 doi:10.1093/nar/gkm993 Data growth and its impact on the SCOP database: new developments Antonina Andreeva 1, *, Dave Howorth 1 , John-Marc Chandonia 2,3 , Steven E. Brenner 2 , Tim J. P. Hubbard 4 , Cyrus Chothia 5 and Alexey G. Murzin 1 1 MRC Centre for Protein Engineering, Hills Road, Cambridge CB2 0QH, UK, 2 Department of Plant and Microbial Biology, 461A Koshland Hall 3102, University of California, Berkeley, CA 94720-3102, 3 Physical Biosciences Division,

  7. Verification of the history-score moment equations for weight-window variance reduction

    SciTech Connect (OSTI)

    Solomon, Clell J; Sood, Avneet; Booth, Thomas E; Shultis, J. Kenneth

    2010-12-06

    The history-score moment equations that describe the moments of a Monte Carlo score distribution have been extended to weight-window variance reduction, The resulting equations have been solved deterministically to calculate the population variance of the Monte Carlo score distribution for a single tally, Results for one- and two-dimensional one-group problems are presented that predict the population variances to less than 1% deviation from the Monte Carlo for one-dimensional problems and between 1- 2% for two-dimensional problems,

  8. Light weight radioisotope heater unit (LWRHU) production for the Cassini mission

    SciTech Connect (OSTI)

    Rinehart, G.H.

    1997-01-01

    The Light-Weight Radioisotope Heater Unit (LWRHU) is a [sup 238]PuO[sub 2] fueled heat source designed to provide one thermal watt in each of various locations on a spacecraft. The heat sources are required to maintain the temperature of specific components within normal operating ranges. The heat source consists of a hot- pressed [sup 238]PuO[sub 2] fuel pellet, a Pt-3ORh vented capsule, a pyrolytic graphite insulator, and a woven graphite aeroshell assembly. Los Alamos National Laboratory has fabricated 180 heat sources, 157 of which will be used on the Cassini mission.

  9. Significance-weighted feature extraction from hyper-dimensional data and its applications

    SciTech Connect (OSTI)

    Fujimura, S.; Kiyasu, S.

    1996-11-01

    Extracting significant features is essential for processing and transmission of vast volume of hyper-dimensional data. Conventional ways of extracting features are not always satisfactory for this kind of data in terms of optimality and computation time. Here we present a successive feature extraction method designed for significance-weighted supervised classification. After all the data are orthogonalized and reduced by principal component analysis, a set of appropriate features for prescribed purpose is extracted as linear combinations of the reduced components. We applied this method to 411 dimensional hyperspectral data obtained by a ground-based imaging spectrometer. The data were obtained from tree leaves of five categories, soil, stone and concrete. Features were successively extracted, and they were found to yield more than several percents higher accuracy for the classification of prescribed classes than a conventional method. We applied the results of feature extraction for evaluating the performance of current sensors and for designing the spectral bands of new sensors. Bands of new sensors were designed by allocating them to the highly weighted wavelength in extracted features. The designed bands were revealed to be more appropriate for the specific purpose than the current sensors. 8 refs., 11 figs., 3 tabs.

  10. A High Resolution, Light-Weight, Synthetic Aperture Radar for UAV Application

    SciTech Connect (OSTI)

    Doerry, A.W.; Hensley, W.H.; Stence, J.; Tsunoda, S.I. Pace, F.; Walker, B,C.; Woodring, M.

    1999-05-27

    (U) Sandia National Laboratories in collaboration with General Atomics (GA) has designed and built a high resolution, light-weight, Ku-band Synthetic Aperture Radar (SAR) known as "Lynx". Although Lynx can be operated on a wide variety of manned and unmanned platforms, its design is optimized for use on medium altitude Unmanned Aerial Vehicles (UAVS). In particular, it can be operated on the Predator, I-GNAT, and Prowler II platforms manufactured by GA. (U) The radar production weight is less than 120 lb and operates within a 3 GHz band from 15.2 GHz to 18.2 GHz with a peak output power of 320 W. Operating range is resolution and mode dependent but can exceed 45 km in adverse weather (4 mm/hr rain). Lynx has operator selectable resolution and is capable of 0.1 m resolution in spotlight mode and 0.3 m resolution in stripmap mode, over substantial depression angles (5 to 60 deg) and squint angles (broadside 45 deg). Real-time Motion Compensation is implemented to allow high-quality image formation even during vehicle turns and other maneuvers.

  11. Fact #846: November 10, 2014 Trucks Move 70% of all Freight by Weight and 74% of Freight by Value

    Broader source: Energy.gov [DOE]

    According to the preliminary 2012 Commodity Flow Survey (CFS) data, trucks transport the vast majority of freight by both weight and value. The two pie charts below show the share of freight moved...

  12. Reduced weight decontamination formulation utilizing a solid peracid compound for neutralization of chemical and biological warfare agents

    DOE Patents [OSTI]

    Tucker, Mark D.

    2011-09-20

    A reduced weight decontamination formulation that utilizes a solid peracid compound (sodium borate peracetate) and a cationic surfactant (dodecyltrimethylammonium chloride) that can be packaged with all water removed. This reduces the packaged weight of the decontamination formulation by .about.80% (as compared to the "all-liquid" DF-200 formulation) and significantly lowers the logistics burden on the warfighter. Water (freshwater or saltwater) is added to the new decontamination formulation at the time of use from a local source.

  13. Tank 40 Final SB7b Chemical Characterization Results

    SciTech Connect (OSTI)

    Bannochie, C. J.

    2012-11-06

    A sample of Sludge Batch 7b (SB7b) was taken from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). The SB7b WAPS sample was also analyzed for chemical composition including noble metals and fissile constituents. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB7b sample was transferred from the shipping container into a 4-L high density polyethylene bottle and solids were allowed to settle over the weekend. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 558 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon? vessels and four with NaOH/Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Two Analytical Reference Glass ? 1 (ARG-1) standards were digested along with a blank for each preparation. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma ? atomic emission spectroscopy (ICP-AES) analysis, inductively coupled plasma ? mass spectrometry (ICP-MS) analysis, atomic absorption spectroscopy (AA) for As and Se, and cold vapor atomic absorption spectroscopy (CV-AA) for Hg. Equivalent dilutions of the alkali fusion digestions and blank were submitted to AD for ICP-AES analysis. Tank 40 SB7b supernate was collected from a mixed slurry sample in the SRNL Shielded Cells and submitted to AD for ICP-AES, ion chromatography (IC), total base/free OH{sup -}/other base, total inorganic carbon/total organic carbon (TIC/TOC) analyses, and Cs-137 gamma scan. Weighted dilutions of slurry were submitted for IC, TIC/TOC, and total base/free OH-/other base analyses. Activities for U-233, U-235, and Pu-239 were determined from the ICP-MS data for the aqua regia digestions of the Tank 40 WAPS slurry using the specific activity of each isotope. The Pu-241 value was determined from a Pu-238/-241 method.

  14. User:Ajohnson7 | Open Energy Information

    Open Energy Info (EERE)

    Ajohnson7 Jump to: navigation, search Name Adam Johnson Location DallasFort Worth Edits 1 Retrieved from "http:en.openei.orgwindex.php?titleUser:Ajohnson7&oldid692891...

  15. A=7Be (2002TI10)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2002TI10) (See Energy Level Diagrams for 7Be) GENERAL: References to articles on general properties of 7Be published since the previous review (1988AJ01) are grouped into...

  16. A=7He (2002TI10)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2002TI10) (See Energy Level Diagrams for 7He) GENERAL: References to articles on general properties of 7He published since the previous review (1988AJ01) are grouped into...

  17. A=7He (1979AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9AJ01) (See the Isobar Diagram for 7He) GENERAL: See also (1974AJ01) and Table 7.1 [Table of Energy Levels] (in PDF or PS). See (1974IR04, 1974TH01, 1975PN1A, 1976TR1A, 1977DO06, 1977SH1C, 1978DA06). 1. 7Li(π-, γ)7He Qm = 128.37 The radiative capture has been observed to the ground state of 7He. The (M1) transition is seen Eγ = 126.6 MeV (1976AL1F). See also (1976TR1A). 2. 7Li(n, p)7He Qm = -10.42 At En = 14.8 MeV a proton group is reported corresponding to 7Heg.s.: Γ < 0.2 MeV

  18. EXHIBIT G7.0 Attachment 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G7.0 Attachment 2 32014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Applicable): Subcontract No. PR- Ex. G dated: XXXXXX Rev. No.: 7 Pursuant to the requirements in...

  19. Rotation-Enabled 7-DOF Seismometer

    Broader source: Energy.gov [DOE]

    Rotation-Enabled 7-DOF Seismometer presentation at the April 2013 peer review meeting held in Denver, Colorado.

  20. Operations & Maintenance Best Practices Guide: Chapter 7

    Broader source: Energy.gov [DOE]

    Guide describes chapter 7 of the Operations and Maintenance Best Practices: A Guide to Achieving Operational Efficiency.

  1. Embedding the weighted Sobolev space W{sup l}{sub p}({omega};v) in the space L{sub p}({omega};{omega})

    SciTech Connect (OSTI)

    Kusainova, L K

    2000-02-28

    Several conditions on the weight functions v and {omega} are obtained that guarantee the embedding inequality. Classes of weights {omega} and v in which these conditions are both necessary and sufficient are described.

  2. A=7Be (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) (See Energy Level Diagrams for 7Be) GENERAL: See also (1984AJ01) and Table 7.7 Table of Energy Levels (in PDF or PS) here. Nuclear models: (1983BU1B, 1983FU1D, 1983HO22,...

  3. Table 26. Natural gas home customer-weighted heating degree days

    U.S. Energy Information Administration (EIA) Indexed Site

    96 Created on: 4/26/2016 6:14:01 PM Table 26. Natural gas home customer-weighted heating degree days Month/Year/Type of data New England Middle Atlantic East North Central West North Central South Atlantic CT, ME, MA, NH, RI, VT NJ, NY, PA IL, IN, MI, OH, WI IA, KS, MN, MO, ND, NE, SD DE, FL, GA, MD, DC, NC, SC, VA, WV November Normal 702 665 757 841 443 2014 749 742 909 1,002 562 2015 583 509 596 653 325 % Diff (normal to 2015) -17.0 -23.5 -21.3 -22.4 -26.6 % Diff (2014 to 2015) -22.2 -31.4

  4. High performance carbon fibers from very high molecular weight polyacrylonitrile precursors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Morris, E. Ashley; Weisenberger, Matthew C.; Abdallah, Mohamed G.; Vautard, Frederic; Grappe, Hippolyte A.; Ozcan, Soydan; Paulauskas, Felix L.; Eberle, Cliff; Jackson, David C.; Mecham, Sue J.; et al

    2016-02-02

    In this study, carbon fibers are unique reinforcing agents for lightweight composite materials due to their outstanding mechanical properties and low density. Current technologies are capable of producing carbon fibers with 90-95% of the modulus of perfect graphite (~1025 GPa). However, these same carbon fibers possess less than 10% of the theoretical carbon fiber strength, estimated to be about 100 GPa.[1] Indeed, attempts to increase carbon fiber rigidity results in lower breaking strength. To develop advanced carbon fibers with both very high strength and modulus demands a new manufacturing methodology. Here, we report a method of manufacturing high strength, verymore » high modulus carbon fibers from a very high molecular weight (VHMW) polyacrylonitrile (PAN) precursor without the use of nanomaterial additives such as nucleating or structure-templating agents, as have been used by others.[2,3]« less

  5. A new model for predicting the fouling deposit weight of coal

    SciTech Connect (OSTI)

    Yeakel, J.D. ); Finkelman, R.B. )

    1988-06-01

    One of the major problems associated with coal combustion is the buildup of sintered ash deposits in the convective passes of boilers. These deposits, referred to as fouling deposits, can drastically reduce heat transfer, cause erosion by channelizing gas flow, and contribute to the corrosion of exposed metal surfaces. Downtime for cleaning fouled commercial boilers can be a multi-million-dollar expense. Utility boilers generally are designed to burn coal that falls within a specific fouling behavior range. Therefore, to minimize the deleterious effects of boiler fouling and to maximize boiler efficiency, it is necessary to anticipate or assess the fouling characteristics of a coal prior to combustion. This paper introduces a new method for predicting fouling deposit weights by using commonly available coal quality data. The authors have developed a modified concept of the coal quality characteristics that influence fouling. This concept evolved from a review of the literature and from the statistical analysis of results from 44 combustion tests.

  6. Method for fabricating light weight carbon-bonded carbon fiber composites

    DOE Patents [OSTI]

    Wrenn, Jr., George E.; Abbatiello, Leonard A.; Lewis, Jr., John

    1989-01-01

    Ultralight carbon-bonded carbon fiber composites of densities in the range of about 0.04 to 0.10 grams per cubic centimeter are fabricated by forming an aqueous slurry of carbonaceous fibers which include carbonized fibers and 0-50 weight percent fugitive fibers and a particulate thermosetting resin precursor. The slurry is brought into contact with a perforated mandrel and the water is drained from the slurry through the perforations at a controlled flow rate of about 0.03 to 0.30 liters per minutes per square inch of mandrel surface. The deposited billet of fibers and resin precursor is heated to cure the resin precursor to bind the fibers together, removed from the mandrel, and then the resin and fugitive fibers, if any, are carbonized.

  7. Calibration of erythemally weighted broadband instruments: A comparison between PMOD/WRC and MSL

    SciTech Connect (OSTI)

    Swift, Neil; Nield, Kathryn; Hamlin, John; Huelsen, Gregor; Groebner, Julian

    2013-05-10

    A Yankee Environmental Systems (YES) UVB-1 ultraviolet pyranometer, designed to measure erythemally weighted total solar irradiance, was calibrated by the Measurement Standards Laboratory (MSL) in Lower Hutt, New Zealand during August 2010. The calibration was then repeated during July and August 2011 by the Physikalisch-Meteorologisches Obervatorium Davos, World Radiation Center (PMOD/WRC) located in Davos, Switzerland. Calibration results show that measurements of the relative spectral and angular response functions at the two institutes are in excellent agreement, thus providing a good degree of confidence in these measurement facilities. However, measurements to convert the relative spectral response into an absolute calibration disagree significantly depending on whether an FEL lamp or solar spectra are used to perform this scaling. This is the first serious comparison of these scaling methods to formally explore the potential systematic errors which could explain the discrepancy.

  8. Method for fabricating light weight carbon-bonded carbon fiber composites

    DOE Patents [OSTI]

    Wrenn, G.E. Jr.; Abbatiello, L.A.; Lewis, J. Jr.

    1987-06-17

    The invention is directed to the fabrication of ultralight carbon- bonded carbon fiber composites of densities in the range of about 0. 04 to 0.10 grams per cubic centimeter. The composites are fabricated by forming an aqueous slurry of carbonaceous fibers which include carbonized fibers and 0-50 weight percent fugitive fibers and a particulate thermosetting resin precursor. The slurry is brought into contact with a perforated mandrel and the water is drained from the slurry through the perforations at a controlled flow rate of about 0. 03 to 0.30 liters per minutes per square inch of a mandrel surface. The deposited billet of fibers and resin precursor is heated to cure the resin precursor to bind the fibers together, removed from the mandrel, and then the resin and fugitive fibers, if any, are carbonized.

  9. Weighting Factors for the Commercial Building Prototypes Used in the Development of ANSI/ASHRAE/IESNA Standard 90.1-2010

    SciTech Connect (OSTI)

    Jarnagin, Ronald E.; Bandyopadhyay, Gopal K.

    2010-01-21

    Detailed construction data from the McGraw Hill Construction Database was used to develop construction weights by climate zones for use with DOE Benchmark Buildings and for the ASHRAE Standard 90.1-2010 development. These construction weights were applied to energy savings estimates from simulation of the benchmark buildings to establish weighted national energy savings.

  10. Test and evaluation report for Westinghouse Hanford Company`s 1-L Liquid Shipper, Docket 95-41-7A, Type A container

    SciTech Connect (OSTI)

    Kelly, D.L.

    1995-11-01

    This report documents the U.S. Department of Transportation Specification 7A Type A (DOT-7A) compliance test results of the 1-L Liquid Shipper packaging. The 1-L Liquid Shipper consists of the 3M SafeSend polyethylene canister base and cap with integral sorbent material, a quad ring gasket, a plastic bag, and six foam inserts. A 1-L narrow-mouth, Teflon bottle with Tefzel lid holds contents. The inner bottle is placed inside the SafeSend container. The inner bottle content weight cannot exceed 2000 g (4.4 lb). Total bottle weight, including contents cannot exceed 2167.5 g (4.78 lb). The nominal gross weight of the assembled packaging is to be no more that 3830.5 g (8.4 lb). The approved packaging system is designed to ship Type A quantities of radioactive materials, normal form. Contents may be liquid or solid form. Liquid contents may have a specific gravity less than or equal to (<2). Solid materials are limited in weight, to include packaging, to the gross weight of the as-tested liquids and bottles.

  11. TableHC7.13.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    111.1 26.7 28.8 20.6 13.1 22.0 16.6 38.6 Indoor Lights Turned On During Summer Number of Lights Turned On Between 1 and 4 Hours per Day............ 91.8 20.8 23.6 17.0 11.3 19.1 13.0 30.7 1........................................................... 28.6 9.4 9.1 4.5 2.4 3.2 5.7 12.6 2........................................................... 29.5 6.8 8.0 5.8 3.7 5.2 4.2 10.2 3........................................................... 14.7 2.7 3.1 3.0 2.5 3.4 1.7 4.1

  12. A=7He (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See the Isobar Diagram for 7He) GENERAL: See also (1979AJ01) and Table 7.1 [Table of Energy Levels] (in PDF or PS). Reactions involving pions: (1978FU09, 1979BA1M, 1979PE1C). Hypernuclei: (1978DA1A, 1978SO1A, 1979BU1C, 1981WA1J, 1982KO11). Other topics: (1979BE1H, 1981AV02, 1982AW02, 1982NG01). 1. 7Li(π-, γ)7He Qm = 128.36 See (1979AJ01). 2. 7Li(n, p)7He Qm = -10.42 At En = 14.8 MeV a proton group is reported corresponding to 7Heg.s.: Γ < 0.2 MeV: see (1979AJ01). See also

  13. PARC Periodical | Volume 7, Issue 2 | Photosynthetic Antenna Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center 2 December 7, 2015 PARC Periodical | Volume 7, Issue 2 VIEW ARTICLE HERE

  14. Microsoft Word - TOC_Section_J.7_Model.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7-1 ATTACHMENT J-7 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS

  15. Structural and Biophysical Studies of the Human IL-7/IL-7R[alpha] Complex

    SciTech Connect (OSTI)

    McElroy, Craig A.; Dohm, Julie A.; Walsh, Scott T.R.; (OSU); (UPENN)

    2009-03-06

    IL-7 and IL-7R{alpha} bind the {gamma}{sub c} receptor, forming a complex crucial to several signaling cascades leading to the development and homeostasis of T and B cells. We report that the IL-7R{alpha} ectodomain uses glycosylation to modulate its binding constants to IL-7, unlike the other receptors in the {gamma}{sub c} family. IL-7 binds glycosylated IL-7R{alpha} 300-fold more tightly than unglycosylated IL-7R{alpha}, and the enhanced affinity is attributed primarily to an accelerated on rate. Structural comparison of IL-7 in complex to both forms of IL-7R{alpha} reveals that glycosylation does not participate directly in the binding interface. The SCID mutations of IL-7R{alpha} locate outside the binding interface with IL-7, suggesting that the expressed mutations cause protein folding defects in IL-7R{alpha}. The IL-7/IL-7R{alpha} structures provide a window into the molecular recognition events of the IL-7 signaling cascade and provide sites to target for designing new therapeutics to treat IL-7-related diseases.

  16. Figure 7 | OSTI, US Dept of Energy, Office of Scientific and Technical

    Office of Scientific and Technical Information (OSTI)

    Information 7

  17. TableHC7.1.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    111.1 26.7 28.8 20.6 13.1 22.0 16.6 38.6 Census Region and Division Northeast.................................................. 20.6 4.9 5.4 3.5 2.4 4.3 3.2 8.1 New England......................................... 5.5 1.3 1.3 1.0 0.6 1.2 0.7 2.3 Middle Atlantic...................................... 15.1 3.7 4.1 2.5 1.8 3.1 2.5 5.8 Midwest.................................................... 25.6 6.5 6.6 4.7 3.0 4.8 3.5 9.4 East North Central................................ 17.7 4.7 4.3 3.2 2.2

  18. TableHC7.3.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Household Size 1 Person..................................................... 30.0 13.5 8.5 4.3 2.0 1.8 5.9 13.1 2 Persons................................................... 34.8 6.0 8.8 7.3 4.4 8.4 3.5 8.4 3 Persons................................................... 18.4 3.1 4.7 3.4 2.5 4.6 2.0 5.8 4 Persons................................................... 15.9 2.2 3.5 3.3 2.7 4.3 2.2 5.1 5 Persons................................................... 7.9 1.1 2.1 1.5 1.1 2.1 1.7 3.7 6 or More

  19. REPORTABLE RADIONUCLIDES IN DWPF SLUDGE BATCH 7A (MACROBATCH 8)

    SciTech Connect (OSTI)

    Reboul, S.; Diprete, D.; Click, D.; Bannochie, C.

    2011-12-20

    The Waste Acceptance Product Specifications (WAPS) 1.2 require that the waste producer 'shall report the curie inventory of radionuclides that have half-lives longer than 10 years and that are, or will be, present in concentrations greater than 0.05 percent of the total inventory for each waste type indexed to the years 2015 and 3115.' As part of the strategy to meet WAPS 1.2, the Defense Waste Processing Facility (DWPF) will report for each waste type all radionuclides that have half-lives longer than 10 years and contribute greater than 0.01 percent of the total curie inventory from the time of production through the 1100 year period from 2015 through 3115. The initial list of radionuclides to be reported is based on the design-basis glass identified in the Waste Form Compliance Plan (WCP) and Waste Form Qualification Report. However, it is required that the list be expanded if other radionuclides with half-lives greater than 10 years are identified that meet the 'greater than 0.01% of the curie inventory' criterion. Specification 1.6 of the WAPS, International Atomic Energy Agency Safeguards Reporting for High Level Waste (HLW), requires that the ratio by weights of the following uranium and plutonium isotopes be reported: U-233, U-234, U-235, U-236, and U-238; and Pu-238, Pu-239, Pu-240, Pu-241, and Pu-242. Therefore, the complete list of reportable radionuclides must also include these sets of U and Pu isotopes - and the U and Pu isotopic mass distributions must be identified. The DWPF receives HLW sludge slurry from Savannah River Site (SRS) Tank 40. For Sludge Batch 7a (SB7a), the waste in Tank 40 contained a blend of the heel from Sludge Batch 6 (SB6) and the Sludge Batch 7 (SB7) material transferred to Tank 40 from Tank 51. This sludge blend is also referred to as Macrobatch 8. Laboratory analyses of a Tank 40 sludge sample were performed to quantify the concentrations of pertinent radionuclides in the SB7a waste. Subsequently, radiological decay and in-growth were calculated over the time period from 2015 to 3115. This provided a basis for characterizing the radionuclide content of SB7a over time and for identifying the 'reportable radionuclides.' Details of the characterization methodology and the analytical results are the focus of this report. This work was performed at the request of the Waste Solidification Engineering Department of Savannah River Remediation, initiated via Technical Task Request (TTR) HLW-DWPF-TTR-2010-0031. A minor revision in the reporting requirements was requested via a subsequent email communication. The work was conducted in accordance with the protocols identified in Task Technical and Quality Assurance Plan SRNL-RP-2010-01218 and Analytical Study Plan SRNL-RP-2010-01219. All of the raw data related to this scope have been recorded in laboratory notebook SRNL-NB-2011-00061. The overall goal of this task was to characterize the radionuclide content of the SB7a waste sufficiently to meet the WAPS and DWPF reporting requirements. The specific objectives were: (1) Quantify the current concentrations of all radionuclides impacting (or potentially-impacting) the total curie content between calendar years 2011 and 3115. Also quantify the current concentrations of other radionuclides specifically requested in the TTR or required by the WAPS. (2) Calculate future concentrations of decayed and in-grown radionuclides impacting the total curie content between calendar years 2015 and 3115; (3) Identify as 'reportable' all radionuclides contributing {ge} 0.01% of the total curie content from 2015 to 3115 and having half-lives {ge} 10 years.

  20. 7.0 - Integrated Acquisition Planning Process

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    .0 (August 2006) 1 INTEGRATING ACQUISITION PLANNING PROCESSES - AN OVERVIEW REFERENCES 1. FAR Part 7 Acquisition Planning 2. FAR Part 34 Major System Acquisition 3. Acquisition Letter 2005-08R, Small Business Programs 4. Acquisition Guide Chapter 7.1, Acquisition Planning 5. Acquisition Guide Chapter 42.5, Contract Management Planning 6. DOE O 580.1 Department of Energy Property Management Program 7. DOE O 413.3 Program and Project Management for the Acquisition of Capital Assets Guiding

  1. Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

    SciTech Connect (OSTI)

    Donley, Tim

    2014-12-31

    Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the replacement market that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what has already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Coopers CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.

  2. Impacts of Vehicle Weight Reduction via Material Substitution on Life-Cycle Greenhouse Gas Emissions

    SciTech Connect (OSTI)

    Kelly, Jarod C.; Sullivan, John L.; Burnham, Andrew; Elgowainy, Amgad

    2015-10-20

    This study examines the vehicle-cycle impacts associated with substituting lightweight materials for those currently found in light-duty passenger vehicles. We determine part-based energy use and greenhouse gas (GHG) emission ratios by collecting material substitution data from both the literature and automotive experts and evaluating that alongside known mass-based energy use and GHG emission ratios associated with material pair substitutions. Several vehicle parts, along with full vehicle systems, are examined for lightweighting via material substitution to observe the associated impact on GHG emissions. Results are contextualized by additionally examining fuel-cycle GHG reductions associated with mass reductions relative to the baseline vehicle during the use phase and also determining material pair breakeven driving distances for GHG emissions. The findings show that, while material substitution is useful in reducing vehicle weight, it often increases vehicle-cycle GHGs depending upon the material substitution pair. However, for a vehicles total life cycle, fuel economy benefits are greater than the increased burdens associated with the vehicle manufacturing cycle, resulting in a net total life-cycle GHG benefit. The vehicle cycle will become increasingly important in total vehicle life-cycle GHGs, since fuel-cycle GHGs will be gradually reduced as automakers ramp up vehicle efficiency to meet fuel economy standards.

  3. Characterizing system dynamics with a weighted and directed network constructed from time series data

    SciTech Connect (OSTI)

    Sun, Xiaoran; School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 ; Small, Michael; Zhao, Yi; Xue, Xiaoping

    2014-06-15

    In this work, we propose a novel method to transform a time series into a weighted and directed network. For a given time series, we first generate a set of segments via a sliding window, and then use a doubly symbolic scheme to characterize every windowed segment by combining absolute amplitude information with an ordinal pattern characterization. Based on this construction, a network can be directly constructed from the given time series: segments corresponding to different symbol-pairs are mapped to network nodes and the temporal succession between nodes is represented by directed links. With this conversion, dynamics underlying the time series has been encoded into the network structure. We illustrate the potential of our networks with a well-studied dynamical model as a benchmark example. Results show that network measures for characterizing global properties can detect the dynamical transitions in the underlying system. Moreover, we employ a random walk algorithm to sample loops in our networks, and find that time series with different dynamics exhibits distinct cycle structure. That is, the relative prevalence of loops with different lengths can be used to identify the underlying dynamics.

  4. Bayesian Inference for Time Trends in Parameter Values using Weighted Evidence Sets

    SciTech Connect (OSTI)

    D. L. Kelly; A. Malkhasyan

    2010-09-01

    There is a nearly ubiquitous assumption in PSA that parameter values are at least piecewise-constant in time. As a result, Bayesian inference tends to incorporate many years of plant operation, over which there have been significant changes in plant operational and maintenance practices, plant management, etc. These changes can cause significant changes in parameter values over time; however, failure to perform Bayesian inference in the proper time-dependent framework can mask these changes. Failure to question the assumption of constant parameter values, and failure to perform Bayesian inference in the proper time-dependent framework were noted as important issues in NUREG/CR-6813, performed for the U. S. Nuclear Regulatory Commissions Advisory Committee on Reactor Safeguards in 2003. That report noted that in-dustry lacks tools to perform time-trend analysis with Bayesian updating. This paper describes an applica-tion of time-dependent Bayesian inference methods developed for the European Commission Ageing PSA Network. These methods utilize open-source software, implementing Markov chain Monte Carlo sampling. The paper also illustrates an approach to incorporating multiple sources of data via applicability weighting factors that address differences in key influences, such as vendor, component boundaries, conditions of the operating environment, etc.

  5. Tailoring a low-molecular weight protein tyrosine phosphatase into an efficient reporting protein

    SciTech Connect (OSTI)

    Liu, Xiao-Yan; Li, Lan-Fen [The National Laboratory of Protein Engineering and Plant Genetic Engineering, College of Life Science, Peking University, Beijing 100871 (China)] [The National Laboratory of Protein Engineering and Plant Genetic Engineering, College of Life Science, Peking University, Beijing 100871 (China); Su, Xiao-Dong, E-mail: xdsu@pku.edu.cn [The National Laboratory of Protein Engineering and Plant Genetic Engineering, College of Life Science, Peking University, Beijing 100871 (China) [The National Laboratory of Protein Engineering and Plant Genetic Engineering, College of Life Science, Peking University, Beijing 100871 (China); Shenzhen Graduate School of Peking University, Shenzhen 518055 (China)

    2009-05-15

    Fusion reporter methods are important tools for biology and biotechnology. An ideal reporter protein in a fusion system should have little effects on its fusion partner and provide an easy and accurate readout. Therefore, a small monomeric protein with high activity for detection assays often has advantages as a reporter protein. For this purpose, we have tailored the human B-form low-molecular-weight phosphotyrosyl phosphatase (HPTP-B) to increase its general applicability as a potent reporter protein. With the aim to eliminate interference from cysteine residues in the native HPTP-B, combined with a systematic survey of N- and C-terminal truncated variants, a series of cysteine to serine mutations were introduced, which allowed isolation of an engineered soluble protein with suitable biophysical properties. When we deleted both the first six residues and the last two residues, we still obtained a soluble mutant protein with correct folding and similar activity with wild-type protein. This mutant with two cysteine to serine mutations, HPTP-B{sup N{sub {Delta}}6-C{sub {Delta}}2-C90S-C109S}, has good potential as an optimal reporter.

  6. OpenEI Community - Section 7

    Open Energy Info (EERE)

    http:en.openei.orgcommunityblogidaho-meeting-2comments endangered species Fauna Fish and Wildlife Flora FWS Section 12 Section 7 Geothermal Regulatory Roadmap Wed, 05 Sep...

  7. A=7He (1974AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See the Isobar Diagram for 7He) Mass of 7He: From the Q of the 7Li(t, 3He)7He reaction, the atomic mass excess of 7He is 26.11 ± 0.03 MeV. 7He is unbound with respect to 6He + n by 0.44 ± 0.03 MeV (1968ST1J): Γ < 0.2 MeV (1973LI02). GENERAL: See (1960GO1B, 1965BO1C, 1965LA1B, 1967CO1K, 1970LO1E, 1972CA37, 1972GA1L, 1972PN1A, 1973JU2A) and (1966LA04). 1. 7Li(t, 3He)7He Qm = -11.18 Q0 = -11.18 ± 0.03 (1968ST1J). The 3He particles to the ground state of 7He have been observed at Et =

  8. Energy Innovation Portal Post, Issue 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7th, 2012 In partnership with the Battelle Commercialization Council, the Energy Innovation Portal is hosting an Accelerating Innovation webinar series. Each session within...

  9. RELAP-7 Beta Release: Summary of Capabilities

    SciTech Connect (OSTI)

    Martineau, Richard C.; Zhang, Hongbin; Zhao, Haihua

    2014-12-01

    RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory (INL). Building upon the decades of software development at the INL, we began the development of RELAP-7 in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway. As part of this development, the first lines of RELAP-7 code were committed to the software revision control repository on November 7th, 2011. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. RELAP-7 is built using the INL’s modern scientific software development framework, MOOSE (Multi-physics Object Oriented Simulation Environment). MOOSE provides improved numerical calculations (including higher-order integration in both space and time, yielding converged second-order accuracy). The RELAP-7 code structure is based on multiple physical component models such as pipes, junctions, pumps, etc. Each component can have options for different fluid models such as single- and two-phase flow. This component-based and physics-based software architecture allows RELAP-7 to adopt different physical models for different applications. A relatively new two-phase hydrodynamic model, termed the ''7-Equation model'' for two phasic pressures, velocities, energies, and volumetric fraction, is incorporated into RELAP-7 for liquid-gas (water-steam) flows. This new model allows second-order integration because it is well-posed, which will reduce the numerical error associated with traditional systems analysis codes. In this paper, we provide a RELAP-7 capability list describing analysis features, range of applicability, and reactor components that will be available for the December 15th, 2014 beta release of the software.

  10. TEST & EVALUATION REPORT FOR THE HEDGEHOG-II PACKAGING SYSTEMS DOT-7A TYPE A CONTAINER

    SciTech Connect (OSTI)

    KELLY, D.L.

    2003-12-29

    This report documents the US. Department of Transportation Specification 7A (DOT-7A) Type A compliance test and evaluation results for the Hedgehog-II packaging systems. The approved Hedgehog-II packaging configurations provide primary and secondary containment. The approved packaging configurations described within this report are designed to ship Type A quantities of radioactive materials, normal form. Contents may be in solid or liquid form. Liquids transported in the approved 1 L glass bottle assembly shall have a specific gravity of less than or equal to 1.6. Liquids transported in all other approved configurations shall have a specific gravity of less than or equal to 2.0. The solid contents, including packaging, are limited in weight to the gross weight of the as-tested liquids and bottles. The approved Hedgehog-II packaging configurations described in this report may be transported by air, and have been evaluated as meeting the applicable International Air Transport Association/International Civil Aviation Organization (IATA/ICAO) Dangerous Goods Regulations in addition to the DOT requirements.

  11. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...8478,446989,412086,390546,425983,421898 "Nitrogen oxide (short tons)" ...2,8.6,9.7,8.7,7.8,7.8,9.1,7.7,8.2,8,8.4 "Nitrogen oxide",1.5,1.6,1.6,1.7,1.8,2,2.2,2.2,2.2...

  12. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...4942,296882,336470,392554,440535,459768 "Nitrogen oxide (short tons)" ...4.6,5.1,4.4,3.4,4.3,4.7,5.4,6.2,6.5,6.8 "Nitrogen oxide",0.7,0.7,0.7,0.7,0.7,0.7,0.8,0.9,1...

  13. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...486,52698,50350,51891,56534,47695,66619 "Nitrogen oxide (short tons)" ...,7.1,7.2,7.5,6,6.8,7.5,6.4,7.5,6.7,10.7 "Nitrogen oxide",0.4,0.5,0.5,0.6,0.6,0.6,0.6,0.6,0...

  14. A=7Li (74AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7Li) GENERAL: See also (66LA04) and Table 7.1 Table of Energy Levels (in PDF or PS). Shell model:(KO61L, CO65I, KU65D, VO65A, BA66T, HA66F, WI66E, BO67R, BO67V, CO67M, FA67A,...

  15. 35,9$&<$&767$7(0(17

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5(48,6,7,21&3;180%(5&3;1'&3;'7( 8VH&3;FRQWLQXDWLRQ&3;VKHHW V &3;LI&3;QHFHVVDU 3DHH&3;PXVW&3;127&3;XVH&3;WKH&3;VSDFH&3;EHORZ 727 3<0(17&29; 3XUVXDQW&3;WR&3;DXWKRULW&3;YHVWHG&3;LQ&3;PH&15;&3;,&3;FHUWLI...

  16. RELAP-7 SOFTWARE VERIFICATION AND VALIDATION PLAN

    SciTech Connect (OSTI)

    Smith, Curtis L; Choi, Yong-Joon; Zou, Ling

    2014-09-01

    This INL plan comprehensively describes the software for RELAP-7 and documents the software, interface, and software design requirements for the application. The plan also describes the testing-based software verification and validation (SV&V) process—a set of specially designed software models used to test RELAP-7.

  17. A=7H (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (Not illustrated) 7H has not been observed. Attempts have been made to detect it in the spontaneous fission of 252Cf (1982AL1H) and in the 7Li(π-, π+) reaction (1981EV01, 1981SE1J, 1981SE1B). See also (1979AJ01

  18. ARM - Datastreams - goes7ir8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ir8 Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : GOES7IR8 GOES-7: infrared, channel 8

  19. ARM - Datastreams - goes7rad8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rad8 Documentation XDC documentation Data Quality Plots ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Datastream : GOES7RAD8 GOES-7: radiance, channel 8

  20. Microsoft Word - NovemberHighlights v7.doc

    Gasoline and Diesel Fuel Update (EIA)

    ... Netherlands, New Zealand, Norway, Poland, Portugal, South Korea, Spain, Sweden, Switzerland, Turkey, the United Kingdom, and the United States. c Population-weighted degree-days. ...

  1. A=7B (1974AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See the Isobar Diagram for 7B) 1. 10B(3He, 6He)7B Qm = -18.55 A 6He group corresponding to the unbound ground state of 7B has been identified at E(3He) = 50 MeV: M - A (7B) = 27.94 ± 0.10, Γ = 1.4 ± 0.2 MeV. The isobaric quartet mass law would predict M - A = 27.76 ± 0.17 MeV. 7B is unbound with respect to 6Be + p (Q = 2.27), 5Li + 2p (Q = 1.68), 4He + 3p (Q = 3.65). The expected single-particle width is Γ = 0.64 MeV: it is suggested that the two-proton and three-proton decays make

  2. A=7B (1979AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9AJ01) (See the Isobar Diagram for 7B) GENERAL: See also (1974DA1B, 1974IR04, 1975BE31, 1975BE56, 1976IR1B, 1977SP1B). 1. 10B(3He, 6He)7B Qm = -18.55 A 6He group corresponding to the unbound ground state of 7B has been identified at E(3He) = 50 MeV: M - A (7B) = 27.94 ± 0.10, Γ = 1.4 ± 0.2 MeV. The isobaric quartet mass law would predict M - A = 27.76 ± 0.17 MeV. 7B is unbound with respect to 6Be + p (Q = 2.27), 5Li + 2p (Q = 1.68), 4He + 3p (Q = 3.65). The expected single-particle width is

  3. A=7B (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4AJ01) (See the Isobar Diagram for 7B) GENERAL: (See also (1979AJ01).) See (1979BE1H, 1982NG01). Mass of 7B:This nucleus has been studied in the 7Li(π+, π-)7B and 10B(3He, 6He)7B reactions. In the (π+, π-) work (1981SE1B; preliminary) find the mass excess to be 27.80 ± 0.10 MeV and Γ for the ground state is 1.2 ± 0.2 MeV. In the earlier (3He, 6He) work [see (1974AJ01)] M-A was reported to be 27.94 ± 0.10 MeV, Γ=1.4 ± 0.2 MeV. We adopt 27.87 ± 0.10 MeV, Γ = 1.3 ± 0.2 MeV. The

  4. A=7He (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) (See the Isobar Diagram for 7He) GENERAL: See also (1984AJ01) and Table 7.1 [Table of Energy Levels] (in PDF or PS). Hypernuclei: (1982KA1D, 1983FE07, 1984AS1D, 1985KO1G, 1986DA1B, 1986DO01, 1986ME1F). Other topics: (1983ANZQ, 1984FR13, 1984VA06, 1986GI10, 1986SH1L, 1987BO40, 1987GOZN, 1987PE1C). Mass of 7He: The atomic mass excess of 7He is 26.11 ± 0.03 MeV: 7He is then unbound with respect to decay into 6He + n by 0.44 MeV: see (1984AJ01). The ground state is calculated to have Jπ =

  5. ELLIPTICAL WEIGHTED HOLICs FOR WEAK LENSING SHEAR MEASUREMENT. III. THE EFFECT OF RANDOM COUNT NOISE ON IMAGE MOMENTS IN WEAK LENSING ANALYSIS

    SciTech Connect (OSTI)

    Okura, Yuki; Futamase, Toshifumi E-mail: tof@astr.tohoku.ac.jp

    2013-07-01

    This is the third paper on the improvement of systematic errors in weak lensing analysis using an elliptical weight function, referred to as E-HOLICs. In previous papers, we succeeded in avoiding errors that depend on the ellipticity of the background image. In this paper, we investigate the systematic error that depends on the signal-to-noise ratio of the background image. We find that the origin of this error is the random count noise that comes from the Poisson noise of sky counts. The random count noise makes additional moments and centroid shift error, and those first-order effects are canceled in averaging, but the second-order effects are not canceled. We derive the formulae that correct this systematic error due to the random count noise in measuring the moments and ellipticity of the background image. The correction formulae obtained are expressed as combinations of complex moments of the image, and thus can correct the systematic errors caused by each object. We test their validity using a simulated image and find that the systematic error becomes less than 1% in the measured ellipticity for objects with an IMCAT significance threshold of {nu} {approx} 11.7.

  6. The design, fabrication and maintenance of semi-trailers employed in the highway transport of weight-concentrated radioactive loads

    SciTech Connect (OSTI)

    Huffman, D.S.

    1991-12-31

    Transportation of weight-concentrated radioactive loads by truck is an essential part of a safe and economical nuclear industry. This proposed standard presents guidance and performance criteria for the safe transport of these weight-concentrated radioactive loads. ANSI N14.30 will detail specific requirements for the design, fabrication, testing, in-service inspections, maintenance and certification of the semi-trailers to be employed in said service. Furthermore, guidelines for a quality assurance program are also enumerated. This standard would apply to any semi-trailer that may or may not be specifically designed to carry weight-concentrated loads. Equipment not suitable per the criteria established in the standard would be removed from service. The nature of the nuclear industry and the need for a positive public perception of the various processes and players, mandates that the highway transportation of weight-concentrated radioactive loads be standardized and made inherently safe. This proposed standard takes a giant step in that direction.

  7. Method and apparatus for indicating electric charge remaining in batteries based on electrode weight and center of gravity

    DOE Patents [OSTI]

    Rouhani, S. Zia

    1996-01-01

    In most electrochemical batteries which generate electricity through the reaction of a battery electrode with an electrolyte solution, the chemical composition, and thus the weight and density, of the electrode changes as the battery discharges. The invention measures a parameter of the battery which changes as the weight of the electrode changes as the battery discharges and relates that parameter to the value of the parameter when the battery is fully charged and when the battery is functionally discharged to determine the state-of-charge of the battery at the time the parameter is measured. In one embodiment, the weight of a battery electrode or electrode unit is measured to determine the state-of-charge. In other embodiments, where a battery electrode is located away from the geometrical center of the battery, the position of the center of gravity of the battery or shift in the position of the center of gravity of the battery is measured (the position of the center of gravity changes with the change in weight of the electrode) and indicates the state-of-charge of the battery.

  8. Method and apparatus for indicating electric charge remaining in batteries based on electrode weight and center of gravity

    DOE Patents [OSTI]

    Rouhani, S.Z.

    1996-12-03

    In most electrochemical batteries which generate electricity through the reaction of a battery electrode with an electrolyte solution, the chemical composition, and thus the weight and density, of the electrode changes as the battery discharges. The invention measures a parameter of the battery which changes as the weight of the electrode changes as the battery discharges and relates that parameter to the value of the parameter when the battery is fully charged and when the battery is functionally discharged to determine the state-of-charge of the battery at the time the parameter is measured. In one embodiment, the weight of a battery electrode or electrode unit is measured to determine the state-of-charge. In other embodiments, where a battery electrode is located away from the geometrical center of the battery, the position of the center of gravity of the battery or shift in the position of the center of gravity of the battery is measured (the position of the center of gravity changes with the change in weight of the electrode) and indicates the state-of-charge of the battery. 35 figs.

  9. A boundary-value problem in weighted Hlder spaces for elliptic equations which degenerate at the boundary of the domain

    SciTech Connect (OSTI)

    Bazalii, B V; Degtyarev, S P

    2013-07-31

    An elliptic boundary-value problem for second-order equations with nonnegative characteristic form is investigated in the situation when there is a weak degeneracy on the boundary of the domain. A priori estimates are obtained for solutions and the problem is proved to be solvable in some weighted Hlder spaces. Bibliography: 18 titles.

  10. TANK 40 FINAL SB7B CHEMICAL CHARACTERIZATION RESULTS

    SciTech Connect (OSTI)

    Bannochie, C.

    2012-03-15

    A sample of Sludge Batch 7b (SB7b) was taken from Tank 40 in order to obtain radionuclide inventory analyses necessary for compliance with the Waste Acceptance Product Specifications (WAPS). The SB7b WAPS sample was also analyzed for chemical composition including noble metals and fissile constituents, and these results are reported here. These analyses along with the WAPS radionuclide analyses will help define the composition of the sludge in Tank 40 that is currently being fed to the Defense Waste Processing Facility (DWPF) as SB7b. At the Savannah River National Laboratory (SRNL) the 3-L Tank 40 SB7b sample was transferred from the shipping container into a 4-L high density polyethylene bottle and solids were allowed to settle over the weekend. Supernate was then siphoned off and circulated through the shipping container to complete the transfer of the sample. Following thorough mixing of the 3-L sample, a 558 g sub-sample was removed. This sub-sample was then utilized for all subsequent analytical samples. Eight separate aliquots of the slurry were digested, four with HNO{sub 3}/HCl (aqua regia) in sealed Teflon{reg_sign} vessels and four with NaOH/Na{sub 2}O{sub 2} (alkali or peroxide fusion) using Zr crucibles. Two Analytical Reference Glass - 1 (ARG-1) standards were digested along with a blank for each preparation. Each aqua regia digestion and blank was diluted to 1:100 mL with deionized water and submitted to Analytical Development (AD) for inductively coupled plasma - atomic emission spectroscopy (ICP-AES) analysis, inductively coupled plasma - mass spectrometry (ICP-MS) analysis, atomic absorption spectroscopy (AA) for As and Se, and cold vapor atomic absorption spectroscopy (CV-AA) for Hg. Equivalent dilutions of the alkali fusion digestions and blank were submitted to AD for ICP-AES analysis. Tank 40 SB7b supernate was collected from a mixed slurry sample in the SRNL Shielded Cells and submitted to AD for ICP-AES, ion chromatography (IC), total base/free OH{sup -}/other base, total inorganic carbon/total organic carbon (TIC/TOC) analyses, and Cs-137 gamma scan. Weighted dilutions of slurry were submitted for IC, TIC/TOC, and total base/free OH{sup -}/other base analyses. Activities for U-233, U-235, and Pu-239 were determined from the ICP-MS data for the aqua regia digestions of the Tank 40 WAPS slurry using the specific activity of each isotope. The Pu-241 value was determined from a Pu-238/-241 method developed by SRNL AD and previously described. The following conclusions were drawn from the analytical results reported here: (1) The ratios of the major elements for the SB7b WAPS sample are different from those measured for the SB7a WAPS sample. There is less Al and Mn relative to Fe than the previous sludge batch. (2) The elemental composition of this sample and the analyses conducted here are reasonable and consistent with DWPF batch data measurements in light of DWPF pre-sample concentration and SRAT product heel contributions to the DWPF SRAT receipt analyses. The element ratios for Al/Fe, Ca/Fe, Mn/Fe, and U/Fe agree within 10% between this work and the DWPF Sludge Receipt and Adjustment Tank (SRAT) receipt analyses. (3) Sulfur in the SB7b WAPS sample is 82% soluble, slightly less than results reported for SB3, SB4, and SB6 samples but unlike the 50% insoluble sulfur observed in the SB5 WAPS sample. In addition, 23% of the soluble sulfur is not present as sulfate in SB7b. (4) The average activities of the fissile isotopes of interest in the SB7b WAPS sample are (in {mu}Ci/g of total dried solids): 4.22E-02 U-233, 6.12E-04 U-235, 1.08E+01 Pu-239, and 5.09E+01 Pu-241. The full radionuclide composition will be reported in a future document. (5) The fission product noble metal and Ag concentrations appear to have largely peaked in previous DWPF sludge batches, with the exception of Ru, which still shows a slight increase in SB7b.

  11. SEP Request for Approval Form 7 - Other Situations for Consumption...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 - Other Situations for Consumption Adjustment SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment File SEP-Request-for-Approval-Form-7Other-Situations-...

  12. Property:Geothermal/Partner7Website | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search Property Name GeothermalPartner7Website Property Type URL Description Partner 7 Website (URL) Pages using the property "GeothermalPartner7Website"...

  13. 2008 Annual Merit Review Results Summary - 7. Combustion Research...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7. Combustion Research 2008 Annual Merit Review Results Summary - 7. Combustion Research DOE Vehicle Technologies Annual Merit Review PDF icon 2008meritreview7.pdf More...

  14. Microsoft PowerPoint - FinalModule7.ppt

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Integrated Baseline Review and Change Control Prepared by: Module 7 - Integrated Baseline Review and Change Control 1 Prepared by: Booz Allen Hamilton Module 7: Integrated ...

  15. Enforcement Letter, Los Alamos National Laboratory - July 7,...

    Office of Environmental Management (EM)

    Enforcement Letter, Los Alamos National Laboratory - July 7, 2003 July 7, 2003 Issued to Los Alamos National Laboratory related to Negative Performance Trends On July 7, 2003, the ...

  16. Categorical Exclusion Determinations: B6.7 | Department of Energy

    Energy Savers [EERE]

    7 Categorical Exclusion Determinations: B6.7 Existing Regulations B6.7: [Reserved] DOCUMENTS AVAILABLE FOR DOWNLOAD No downloads found for this office.

  17. Enforcement Letter, Fluor Daniel Hanford, Inc. - July 7, 1997...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc. - July 7, 1997 Enforcement Letter, Fluor Daniel Hanford, Inc. - July 7, 1997 July 7, 1997 Issued to Fluor Daniel Hanford, Inc., related to Potential Quality Assurance Rule ...

  18. PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7 SOLAR FLARE:

    Office of Scientific and Technical Information (OSTI)

    EVIDENCE OF PARTICLE ACCELERATION AND HEATING IN MAGNETIC RECONNECTION OUTFLOWS (Journal Article) | SciTech Connect PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7 SOLAR FLARE: EVIDENCE OF PARTICLE ACCELERATION AND HEATING IN MAGNETIC RECONNECTION OUTFLOWS Citation Details In-Document Search Title: PLASMOID EJECTIONS AND LOOP CONTRACTIONS IN AN ERUPTIVE M7.7 SOLAR FLARE: EVIDENCE OF PARTICLE ACCELERATION AND HEATING IN MAGNETIC RECONNECTION OUTFLOWS Where particle acceleration

  19. Halloween (+7 Days) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Halloween (+7 Days) Halloween (+7 Days) November 7, 2011 - 1:34pm Addthis Drew Bittner Writer/Editor, Office of Energy Efficiency and Renewable Energy Well, it's now a week after All Hallow's Eve. If you're like my family, most of the candy's been eaten and you're down to that last half-crushed chocolate bar or licorice stick, as well as seeing the discarded bits of costume still here and there-my daughter's having a hard time giving up her night as a superhero. Walking around while my girl went

  20. DOE F 3430.7A | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A DOE F 3430.7A Form used in personnel performance appraisals for the employee to certify ... icon CERTIFICATIONS More Documents & Publications DOE F 3430.7 DOE F 3430.7C DOE F 3430.7B

  1. DOE F 3430.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE F 3430.7 Form contains the Certifications, Performance Appraisal Plan, and the ... SYSTEM EMPLOYEES More Documents & Publications DOE F 3430.7C DOE F 3430.7B DOE F 3430.7A

  2. DOE F 360.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE F 360.7 DOE F 360.7 DVU FEATURED TRAINING & EVENTS.pdf More Documents & Publications DOE F 360.7 DOE F 360.9 DOE F 360.8...

  3. DOE F 360.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE F 360.7 PDF icon DOE F 360.7 DVU FEATURED TRAINING & EVENTS.pdf More Documents & Publications DOE F 360.7 DOE F 360.9 DOE F 360.8

  4. FY 2009 Progress Report for Lightweighting Materials- 7. Low-Cost Carbon Fiber

    Broader source: Energy.gov [DOE]

    The primary Lightweight Materials activity goal is to validate a cost-effective weight reduction in total vehicle weight while maintaining safety, performance, and reliability.

  5. Fact #846: November 10, 2014 Trucks Move 70% of all Freight by Weight and 74% of Freight by Value – Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #846: Trucks Move 70% of all Freight by Weight and 74% of Freight by Value

  6. Minnesota's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Registered Networking Organizations in Minnesota's 7th congressional district Indigenous Environmental Network Registered Energy Companies in Minnesota's 7th congressional...

  7. TableHC2.7.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Type of Air-Conditioning Equipment 1, 2 Central System.............................................. 65.9 47.5 4.0 2.8 7.9 3.7 Without a Heat Pump.................................. 53.5 37.8 3.4 2.2 7.0 3.1 With a Heat Pump....................................... 12.3 9.7 0.6 0.5 1.0 0.6 Window/Wall Units........................................ 28.9 14.9 2.3 3.5 6.0 2.1 1 Unit........................................................... 14.5 6.6 1.0 1.6 4.2 1.2 2

  8. TableHC7.8.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Number of Water Heaters 1................................................................. 106.3 25.8 28.0 19.6 12.7 20.2 16.0 37.3 2 or More.................................................... 3.7 0.3 0.5 0.9 0.4 1.7 Q 0.5 Do Not Use Hot Water................................ 1.1 0.6 0.3 Q N Q 0.5 0.8 Housing Units Served by Main Water Heater One Housing Unit....................................... 99.7 21.8 25.5 19.0 12.5 21.0 13.3 32.3 Two or More Housing Units........................ 10.3 4.3

  9. Categorical Exclusion Determinations: B4.7

    Broader source: Energy.gov [DOE]

    B4.7: Fiber optic cableAdding fiber optic cables to transmission facilities or burying fiber optic cable in existing powerline or pipeline rights-of-way. Covered actions may include associated...

  10. A=7Li (1979AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GENERAL: See also (1974AJ01) and Table 7.2 Table of Energy Levels (in PDF or PS). Shell model: (1974KA11, 1975DI04, 1977ST04, 1978BO31). Collective, rotational or deformed...

  11. Categorical Exclusion Determinations: B5.7

    Broader source: Energy.gov [DOE]

    B5.7: Import or export natural gas, with operational changesApprovals or disapprovals of new authorizations or amendments of existing authorizations to import or export natural gas under section 3...

  12. Categorical Exclusion Determinations: B7.2

    Broader source: Energy.gov [DOE]

    B7.2: Import and export of special nuclear or isotopic materialsApproval of import or export of small quantities of special nuclear materials or isotopic materials in accordance with applicable...

  13. A=7B (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) (See the Isobar Diagram for 7B) The mass excess of 7B from a study of the 10B(3He, 6He)7B reaction is 27.94 ± 0.10 MeV and the width of the ground state is Γ = 1.4 ± 0.2 MeV: see (1974AJ01). 7B is unbound with respect to 6Be + p, 5Li + 2p and 4He + 3 p by 2.28, 1.68 and 3.65 MeV, respectively. The other work described in (1984AJ01) has not been published. See also (1985AN28), (1986HU1D; astrophysics) and (1982KA1D, 1983ANZQ, 1983AU1B; theor.

  14. A=7H (2002TI10)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2002TI10) (Not illustrated) 7H has not been observed. Attempts have been made to detect it in the spontaneous fission of 252Cf (1982AL33) and in the 7Li(π-, π+) reaction [see (1984AJ01)]. A study of 9Be(π-, 2p) (1987GO25) found no evidence for 7H. See also the review of (1989OG1B) and the 7Li(π-, π+) investigation reported in (1989GR06). The ground state is calculated to have Jπ = 1/2+ and to be unstable with respect to 1n, 2n, 3n and 4n emission. Excited states are predicted at 4.84, 5.00

  15. Financial and Activity Report- January 7, 2011

    Office of Energy Efficiency and Renewable Energy (EERE)

    This file includes the Department of Energy's January 7, 2011 weekly report on spending and major actions related to the Recovery Act. The "Weekly Update" tab includes listing of total...

  16. Section 7 | OpenEI Community

    Open Energy Info (EERE)

    Contributor 4 September, 2012 - 21:36 Idaho Meeting 2 endangered species Fauna Fish and Wildlife Flora FWS Section 12 Section 7 The second Idaho GRR meeting was held today...

  17. Categorical Exclusion Determinations: B3.7

    Broader source: Energy.gov [DOE]

    B3.7: New terrestrial infill exploratory and experimental wellsSiting, construction, and operation of new terrestrial infill exploratory and experimental (test) wells, for either extraction or...

  18. TABLES7.CHP:Corel VENTURA

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    S7. Jet Fuel Supply and Disposition, 1988 - Present (Thousand Barrels per Day, Except Where Noted) a Stocks are totals as of end of period. b A negative number indicates a decrease...

  19. Prenatal exposure to environmental contaminants and body composition at age 7–9 years

    SciTech Connect (OSTI)

    Delvaux, Immle; Van Cauwenberghe, Jolijn; Den Hond, Elly; Schoeters, Greet; Govarts, Eva; Nelen, Vera; Baeyens, Willy; Van Larebeke, Nicolas; Sioen, Isabelle

    2014-07-15

    The study aim was to investigate the association between prenatal exposure to endocrine disrupting chemicals (EDCs) and the body composition of 7 to 9 year old Flemish children. The subjects were 114 Flemish children (50% boys) that took part in the first Flemish Environment and Health Study (2002–2006). Cadmium, PCBs, dioxins, p,p′-DDE and HCB were analysed in cord blood/plasma. When the child reached 7–9 years, height, weight, waist circumference and skinfolds were measured. Significant associations between prenatal exposure to EDCs and indicators of body composition were only found in girls. After adjustment for confounders and covariates, a significant negative association was found in girls between prenatal cadmium exposure and weight, BMI and waist circumference (indicator of abdominal fat) and the sum of four skinfolds (indicator of subcutaneous fat). In contrast, a significant positive association (after adjustment for confounders/covariates) was found between prenatal p,p′-DDE exposure and waist circumference as well as waist/height ratio in girls (indicators of abdominal fat). No significant associations were found for prenatal PCBs, dioxins and HCB exposure after adjustment for confounders/covariates. This study suggests a positive association between prenatal p,p′-DDE exposure and indicators of abdominal fat and a negative association between prenatal cadmium exposure and indicators of both abdominal as well as subcutaneous fat in girls between 7 and 9 years old. - Highlights: • Associations between prenatal contaminant exposure and anthropometrics in children. • Significant association only found in girls. • No significant associations found for prenatal PCBs, dioxins and HCB exposure. • Girls: negative association between cadmium and abdominal and subcutaneous fat. • Girls: positive association between p,p′-DDE and indicators of abdominal fat.

  20. 7pt1AcquisitionPlanning.pdf

    Energy Savers [EERE]

    7AC Technologies, Inc. America's Next Top Energy Innovator Challenge 498 likes 7AC Technologies, Inc. National Renewable Energy Laboratory Air conditioning is a very large contributor to U.S. and world energy consumption. Heating and cooling costs for commercial and industrial buildings exceed 25 percent of U.S. primary energy consumption (cooling alone accounts for 4.5 Quads out of 40 Quads) and typically accounts for almost half of a building's operating costs. Air conditioning is also a

  1. 7AC Technologies, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7AC Technologies, Inc. America's Next Top Energy Innovator Challenge 498 likes 7AC Technologies, Inc. National Renewable Energy Laboratory Air conditioning is a very large contributor to U.S. and world energy consumption. Heating and cooling costs for commercial and industrial buildings exceed 25 percent of U.S. primary energy consumption (cooling alone accounts for 4.5 Quads out of 40 Quads) and typically accounts for almost half of a building's operating costs. Air conditioning is also a

  2. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...1619,110143,160083,116859,119161,131807 "Nitrogen oxide (short tons)" ....7,9.5,7.7,8.1,7,7.7,12.3,10.1,9.2,10.5 "Nitrogen oxide",0.9,0.9,0.9,1.1,1.2,1.2,1.9,2.2,2...

  3. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...4941,127948,151533,210579,240881,233573 "Nitrogen oxide (short tons)" ...,7.2,6.7,5.9,7.2,6.7,8.2,10.5,11.7,11.7 "Nitrogen oxide",0.9,0.9,0.8,0.8,0.9,0.9,1,0.9,1.1...

  4. Communication: Smoothing out excited-state dynamics: Analytical gradients for dynamically weighted complete active space self-consistent field

    SciTech Connect (OSTI)

    Glover, W. J.

    2014-11-07

    State averaged complete active space self-consistent field (SA-CASSCF) is a workhorse for determining the excited-state electronic structure of molecules, particularly for states with multireference character; however, the method suffers from known issues that have prevented its wider adoption. One issue is the presence of discontinuities in potential energy surfaces when a state that is not included in the state averaging crosses with one that is. In this communication I introduce a new dynamical weight with spline (DWS) scheme that mimics SA-CASSCF while removing energy discontinuities due to unweighted state crossings. In addition, analytical gradients for DWS-CASSCF (and other dynamically weighted schemes) are derived for the first time, enabling energy-conserving excited-state ab initio molecular dynamics in instances where SA-CASSCF fails.

  5. Effect of molecular weight and concentration of hyaluronan on cell proliferation and osteogenic differentiation in vitro

    SciTech Connect (OSTI)

    Zhao, Ningbo Wang, Xin Qin, Lei Guo, Zhengze Li, Dehua

    2015-09-25

    Hyaluronan (HA), the simplest glycosaminoglycan and a major component of the extracellular matrix, exists in various tissues. It is involved in some critical biological procedures, including cellular signaling, cell adhesion and proliferation, and cell differentiation. The effect of molecular weight (MW) and concentration of HA on cell proliferation and differentiation was controversial. In this study, we investigated the effect of MW and concentration of HA on the proliferation and osteogenic differentiation of rabbit bone marrow-derived stem cells in vitro. Results showed that high MW HA decreased the cell adhesion rate in a concentration-dependant manner. The cell adhesion rate was decreased by increasing MW of HA. Cell proliferation was significantly enhanced by low MW HA (P < 0.05). The factorial analysis indicated that MW and concentration had an interactive effect on the cell adhesion rate and cell proliferation (P < 0.05). High MW HA increased the mRNA expressions of ALP, RUNX-2 and OCN. The higher the MW was, the higher the mRNA expressions were. The factorial analysis indicated that MW and concentration had an interactive effect on ALP mRNA expression (P < 0.05). HA of higher MW and higher concentration promoted bone formation. These findings provide some useful information in understanding the mechanism underlying the effect of MW and concentration of HA on cell proliferation and differentiation. - Highlights: • Effect of hyaluronan on cell proliferation and differentiation is evaluated in vitro. • Hyaluronan of low molecular weight increases cell proliferation. • Hyaluronan of high molecular weight promotes cell osteogenic differentiation. • Molecular weight and concentration of hyaluronan show interactive effect.

  6. Measurement of the polarized forward-backward asymmetry of B quarks using momentum-weighted track charge at SLD

    SciTech Connect (OSTI)

    Junk, T.R.

    1995-11-01

    This thesis presents a direct measurement of the parity-violating parameter A{sub b} by analyzing the polarized forward-backward asymmetry of b quarks in e{sup +}e{sup {minus}} {yields} Z{sup 0} {yields} b{bar b}. Data were taken at the Stanford Linear Accelerator Center (SLAC), with the Stanford Large Detector (SLD), which records the products of e{sup +}e{sup {minus}} interactions at a center of mass energy {radical}s = 91.2 GeV/c{sup 2} at the SLAC Linear Collider (SLC). The SLC/SLD experimental apparatus provides a unique and ideal environment for measuring electroweak asymmetries. Heavy flavor decays of the Z{sup 0} were identified inclusively by taking advantage of the long lifetime of B hadrons, the small, stable SLC beam spot, and SLD`s precise tracking detectors. Two analysis techniques for measuring A{sub b} are presented: a binned fit to the left-right forward-backwards asymmetry of tagged events signed with momentum-weighted track charge, and a self-calibrating maximum-likelihood technique using momentum-weighted charge from the two hemispheres in each tagged event. From our 1994-1995 sample of 3.6 pb{sup {minus}1}, having a luminosity-weighted average e{sup {minus}} polarization of 77.3%, and our 1993 sample of 1.8 pb{sup {minus}1}, having a luminosity-weighted polarization of 63.1%, we obtain A{sub b} = 0.848 {plus_minus} 0.046(stat.) {plus_minus} 0.050(syst.).

  7. RELAP-7 Numerical Stabilization: Entropy Viscosity Method

    SciTech Connect (OSTI)

    R. A. Berry; M. O. Delchini; J. Ragusa

    2014-06-01

    The RELAP-7 code is the next generation nuclear reactor system safety analysis code being developed at the Idaho National Laboratory (INL). The code is based on the INL's modern scientific software development framework, MOOSE (Multi-Physics Object Oriented Simulation Environment). The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical integration methods, and physical models. The end result will be a reactor systems analysis capability that retains and improves upon RELAP5's capability and extends the analysis capability for all reactor system simulation scenarios. RELAP-7 utilizes a single phase and a novel seven-equation two-phase flow models as described in the RELAP-7 Theory Manual (INL/EXT-14-31366). The basic equation systems are hyperbolic, which generally require some type of stabilization (or artificial viscosity) to capture nonlinear discontinuities and to suppress advection-caused oscillations. This report documents one of the available options for this stabilization in RELAP-7 -- a new and novel approach known as the entropy viscosity method. Because the code is an ongoing development effort in which the physical sub models, numerics, and coding are evolving, so too must the specific details of the entropy viscosity stabilization method. Here the fundamentals of the method in their current state are presented.

  8. table7.5_02.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Average Prices of Selected Purchased Energy Sources, 2002; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy Sources; Unit: U.S. Dollars per Million Btu. RSE Economic Residual Distillate Natural LPG and Row Characteristic(a) Electricity Fuel Oil Fuel Oil(b) Gas(c) NGL(d) Coal Factors Total United States RSE Column Factors: 0.7 1.2 2.2 0.7 0.5 1.6 Value of Shipments and Receipts (million dollars) Under 20 19.67 3.98 7.29 4.91 9.79 2.57 11.3 20-49

  9. Structure and T Cell Inhibition Properties of B7 Family Member, B7-H3

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Structure and T Cell Inhibition Properties of B7 Family Member, B7-H3 Citation Details In-Document Search Title: Structure and T Cell Inhibition Properties of B7 Family Member, B7-H3 Authors: Vigdorovich, Vladimir ; Ramagopal, Udupi A. ; Lázár-Molnár, Eszter ; Sylvestre, Eliezer ; Lee, Jun Sik ; Hofmeyer, Kimberly A. ; Zang, Xingxing ; Nathenson, Stanley G. ; Almo, Steven C. [1] ; Chosun) [2] + Show Author Affiliations (Einstein) ( Publication Date:

  10. DOT-7A packaging test procedure

    SciTech Connect (OSTI)

    Kelly, D.L.

    1995-01-23

    This test procedure documents the steps involved with performance testing of Department of Transportation Specification 7A (DOT-7A) Type A packages. It includes description of the performance tests, the personnel involved, appropriate safety considerations, and the procedures to be followed while performing the tests. Westinghouse Hanford Company (WHC) is conducting the evaluation and testing discussed herein for the Department of Energy-Headquarters, Division of Quality Verification and Transportation Safety (EH-321). Please note that this report is not in WHC format. This report is being submitted through the Engineering Documentation System so that it may be used for reference and information purposes.

  11. table7.4_02.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Average Prices of Selected Purchased Energy Sources, 2002; Level: National and Regional Data; Row: Values of Shipments and Employment Sizes; Column: Energy Sources; Unit: U.S. Dollars per Physical Units. Residual Distillate Natural LPG and RSE Economic Electricity Fuel Oil Fuel Oil(b) Gas(c) NGL(d) Coal Row Characteristic(a) (kWh) (gallons) (gallons) (1000 cu ft) (gallons) (short tons) Factors Total United States RSE Column Factors: 0.7 1.2 2.2 0.7 0.5 1.6 Value of Shipments and Receipts

  12. TANK 7 CHARACTERIZATION AND WASHING STUDIES

    SciTech Connect (OSTI)

    Lambert, D.; Pareizs, J.; Click, D.

    2010-02-04

    A 3-L PUREX sludge sample from Tank 7 was characterized and then processed through a series of inhibited water washes to remove oxalate, sodium, and other soluble ions. Current plans use Tank 7 as one of the feed sources for Sludge Batch 7 (SB7). Tank 7 is high in oxalate due to the oxalic acid cleaning of the sludge heels from Tanks 5 and 6 and subsequent transfer to Tank 7. Ten decant and nine wash cycles were performed over a 47 day period at ambient temperature. Initially, seven decants and seven washes were completed based on preliminary estimates of the number of wash cycles required to remove the oxalate in the sludge. After reviewing the composition data, SRNL recommended the completion of 2 or 3 more decant/wash cycles to ensure all of the sodium oxalate had redissolved. In the first 7 washes, the slurry oxalate concentration was 12,300 mg/kg (69.6% oxalate removal compared to 96.1% removal of the other soluble ions). After all ten decants were complete, the slurry oxalate concentration was 3,080 mg/kg (89.2% oxalate removal compared to 99.0% of the other soluble ions). The rate of dissolution of oxalate increased significantly with subsequent washes until all of the sodium oxalate had been redissolved after seven decant/wash cycles. The measured oxalate concentrations agreed very well with LWO predictions for washing of the Tank 7 sample. Highlights of the analysis and washing of the Tank 7 sample include: (1) Sodium oxalate was detected in the as-received filtered solids. 95% of the oxalate was insoluble (undissolved) in the as-received slurry. (2) No sodium oxalate was detected in the post-wash filtered solids. (3) Sodium oxalate is the last soluble species that redissolves during washing with inhibited water. In order to significantly reduce the sodium oxalate concentration, the sludge must be highly washed, leaving the other soluble anions and cations (including sodium) very low in concentration. (4) The post-wash slurry had 1% of the soluble anions and cations remaining, with the exception of sodium and oxalate, for which the percentages were 2.8% and 10.8% respectively. The post-wash sodium concentration was 9.25 wt% slurry total solids basis and 0.15 M supernate. (5) The settling rate of slurry was very fast allowing the completion of one decant/wash cycle each day. (6) The measured yield stress of as-received (6.42 wt% undissolved solids) and post-wash (7.77 wt% undissolved solids) slurry was <1 Pa. For rapidly settling slurries, it can be hard to measure the yield stress of the slurry so this result may be closer to the supernate result than the slurry. The recommended strategy for developing the oxalate target for sludge preparation for Sludge Batch 7 includes the following steps: (1) CPC simulant testing to determine the percent oxalate destruction and acid mix needed to produce a predicted redox of approximately 0.2 Fe{sup +2}/{Sigma}Fe in a SME product while meeting all DWPF processing constraints. (2) Perform a DWPF melter flammability assessment to ensure that the additional carbon in the oxalate together with other carbon sources will not lead to a flammability issue. (3) Perform a DWPF glass paper assessment to ensure the glass produced will meet all DWPF glass limits due to the sodium concentration in the sludge batch. The testing would need to be repeated if a significant CPC processing change, such as an alternative reductant to formic acid, is implemented.

  13. Community Energy Strategic Planning - Step 7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Community Energy Strategic Planning - Step 7 This presentation provides Step 7 to the Community Energy Strategic Planning approach, Put Together a Financing Strategy. PDF icon Community Energy Strategic Planning - Step 7- Summary Presentation More Documents & Publications Community Energy Strategic Planning - Step 8 WORKSHOP: SUSTAINABILITY IN MANUFACTURING, JANUARY 6-7 EA-0984: Finding of No Significant Impact

  14. A=7Li (1984AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    GENERAL: See also (1979AJ01) and Table 7.2 Table of Energy Levels (in PDF or PS). Shell model: (1978FU13, 1978MI13, 1979MA11, 1981BO1Y, 1982BA52, 1982FI13). Cluster and...

  15. A=7Li (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    See also (1984AJ01) and Table 7.2 Table of Energy Levels (in PDF or PS) here. Shell model: (1983BU1B, 1983KU17, 1983SH1D, 1983VA31, 1984CH24, 1984REZZ, 1984VA06,...

  16. 7th International Meshing Roundtable '98

    SciTech Connect (OSTI)

    Eldred, T.J.

    1998-10-01

    The goal of the 7th International Meshing Roundtable is to bring together researchers and developers from industry, academia, and government labs in a stimulating, open environment for the exchange of technical information related to the meshing process. In the past, the Roundtable has enjoyed significant participation from each of these groups from a wide variety of countries.

  17. Errata Corrections as of February 7, 2012

    Gasoline and Diesel Fuel Update (EIA)

    February 7, 2012 1. On Table 21 of the Scenario Case Data spreadsheet files for the Credit Cap 2.1 and Credit Cap 3.0 tables, data for "Total Penalty" (line 2846) and "CES Payments" (lines 2867 through 2875) were corrected

  18. Table 7. U.S. Coal Exports

    U.S. Energy Information Administration (EIA) Indexed Site

    44,092 69,342 565,403 719,715 -21.4 Portugal - 138,480 221,300 138,480 221,300 -37.4 Romania 22,912 79,319 160,396 271,730 407,715 -33.4 Slovakia 73,304 - - 231,503 500,479 -53.7 ...

  19. Excitation functions of {sup 6,7}Li+{sup 7}Li reactions at low energies

    SciTech Connect (OSTI)

    Prepolec, L.; Soic, N.; Blagus, S.; Miljanic, D.; Siketic, Z.; Skukan, N.; Uroic, M.; Milin, M.

    2009-08-26

    Differential cross sections of {sup 6,7}Li+{sup 7}Li nuclear reactions have been measured at forward angles (10 deg. and 20 deg.), using particle identification detector telescopes, over the energy range 2.75-10.00 MeV. Excitation functions have been obtained for low-lying residual-nucleus states. The well pronounced peak in the excitation function of {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(3.37 MeV,2{sup +}) at beam energy about 8 MeV, first observed by Wyborny and Carlson in 1971 at 0 deg., has been observed at 10 deg., but is less evident at 20 deg. The cross section obtained for the {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(g.s,0{sup +}) reaction is about ten times smaller. The well pronounced peak in the excitation function of {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(3.37 MeV,2{sup +}) reaction could correspond to excited states in {sup 14}C, at excitation energies around 30 MeV.

  20. SLUDGE BATCH 7B GLASS VARIABILITY STUDY

    SciTech Connect (OSTI)

    Johnson, F.; Edwards, T.

    2011-10-25

    The Defense Waste Processing Facility (DWPF) is preparing to initiate processing Sludge Batch 7b (SB7b). In support of the upcoming processing, the Savannah River National Laboratory (SRNL) provided a recommendation to utilize Frits 418 with a 6% Na{sub 2}O addition (26 wt% Na{sub 2}O in sludge) and 702 with a 4% Na{sub 2}O addition (24 wt% Na{sub 2}O in sludge) to process SB7b. This recommendation was based on assessments of the compositional projections for SB7b available at the time from the Savannah River Remediation (SRR). To support qualification of SB7b, SRNL executed a variability study to assess the applicability of the current durability models for SB7b. The durability models were assessed over the expected composition range of SB7b, including potential caustic additions, combined with Frits 702 and 418 over a 32-40% waste loading (WL) range. Thirty four glasses were selected based on Frits 418 and 702 coupled with the sludge projections with an additional 4-6% Na{sub 2}O to reflect the potential caustic addition. Six of these glasses, based on average nominal sludge compositions including the appropriate caustic addition, were developed for both Frit 418 and Frit 702 at 32, 36 and 40% WL to provide coverage in the center of the anticipated SB7b glass region. All glasses were fabricated and characterized using chemical composition analysis, X-ray diffraction (XRD) and the Product Consistency Test (PCT). To comply with the DWPF Glass Product Control Program, a total of thirty four glasses were fabricated to assess the applicability of the current DWPF PCCS durability models. Based on the measured PCT response, all of the glasses were acceptable with respect to the Environmental Assessment (EA) benchmark glass regardless of thermal history. The NL[B] values of the SB7b variability study glasses were less than 1.99 g/L as compared to 16.695 g/L for EA. A small number of the D-optimally selected 'outer layer' extreme vertices (EV) glasses were not predictable using the current Product Composition Control System (PCCS) models for durability, but were acceptable compared to the EA glass when tested. These glasses fell outside of the lower 95% confidence band, which demonstrates conservatism in the model. A few of the glasses fell outside of the upper 95% confidence band; however, these particular glasses have normalized release values that were much lower than the values of EA and should be of no practical concern. Per the requirements of the DWPF Glass Product Control Program, the PCCS durability models have been shown to be applicable to the SB7b sludge system with a range of Na{sub 2}O concentrations blended with Frits 418 or 702. PCT results from the glasses fabricated as part of the variability study were shown to be predictable by the current DWPF PCCS models and/or acceptable with respect to the EA benchmark glass regardless of thermal history or compositional view.

  1. SU-E-T-367: Optimization of DLG Using TG-119 Test Cases and a Weighted Mean Approach

    SciTech Connect (OSTI)

    Sintay, B; Vanderstraeten, C; Terrell, J; Maurer, J; Pursley, J; Wiant, D

    2014-06-01

    Purpose: Optimization of the dosimetric leaf gap (DLG) is an important step in commissioning the Eclipse treatment planning system for sliding window intensity-modulated radiation therapy (SW-IMRT) and RapidArc. Often the values needed for optimal dose delivery differ markedly from those measured at commissioning. We present a method to optimize this value using the AAPM TG-119 test cases. Methods: For SW-IMRT and RapidArc, TG-119 based test plans were created using a water-equivalent phantom. Dose distributions measured on film and ion chamber (IC) readings taken in low-gradient regions within the targets were analyzed separately. Since DLG is a single value per energy, SW-IMRT and RapidArc must be considered simultaneously. Plans were recalculated using a linear sweep from 0.02cm (the minimum DLG) to 0.3 cm. The calculated point doses were compared to the measured doses for each plan, and based on these comparisons an optimal DLG value was computed for each plan. TG-119 cases are designed to push the system in various ways, thus, a weighted mean of the DLG was computed where the relative importance of each type of plan was given a score from 0.0 to 1.0. Finally, SW-IMRT and RapidArc are assigned an overall weight based on clinical utilization. Our routine patient-QA (PQA) process was performed as independent validation. Results: For a Varian TrueBeam, the optimized DLG varied with ? = 0.044cm for SW-IMRT and ? = 0.035cm for RapidArc. The difference between the weighted mean SW-IMRT and RapidArc value was 0.038cm. We predicted utilization of 25% SW-IMRT and 75% RapidArc. The resulting DLG was ~1mm different than that found by commissioning and produced an average error of <1% for SW-IMRT and RapidArc PQA test cases separately. Conclusion: The weighted mean method presented is a useful tool for determining an optimal DLG value for commissioning Eclipse.

  2. Next-to-leading order weighted Sivers asymmetry in semi-inclusive deep inelastic scattering: three-gluon correlator

    SciTech Connect (OSTI)

    Dai, Lingyun; Prokudin, Alexei; Kang, Zhong-Bo; Vitev, Ivan

    2015-09-01

    We study the three-gluon correlation function contribution to the Sivers asymmetry in semiinclusive deep inelastic scattering. We first establish the matching between the usual twist-3 collinear factorization approach and transverse momentum dependent factorization formalism for the moderate transverse momentum region. We then derive the so-called coefficient functions used in the usual TMD evolution formalism. Finally we perform the next-to-leading order calculation for the transverse-momentum-weighted spin-dependent differential cross section, from which we identify the QCD collinear evolution of the twist-3 Qiu-Sterman function: the off diagonal contribution from the three-gluon correlation functions.

  3. Proposed Junction-Box Stress Test (Using an Added Weight) for Use During the Module Qualification (Presentation)

    SciTech Connect (OSTI)

    Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.

    2012-02-01

    Engineering robust adhesion of the junction-box (j-box) is a hurdle typically encountered by photovoltaic (PV) module manufacturers during product development. Furthermore, there are historical incidences of adverse effects (e.g., fires) caused when the j-box/adhesive/module system has failed in the field. The addition of a weight to the j-box during the 'damp heat' IEC qualification test is proposed to verify the basic robustness of the j-box adhesion system. The details of the proposed test are described, in addition to the preliminary results conducted using representative materials and components.

  4. Echo 1-7 Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    Echo 1-7 Wind Farm Jump to: navigation, search Name Echo 1-7 Wind Farm Facility Echo 1-7 Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner...

  5. DOE F 3430.7C | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C DOE F 3430.7C Form is used to prepare employee performance ratings based on element from ... icon PMRSPMS PERFORMANCE RATING More Documents & Publications DOE F 3430.7 DOE F 3430.7B

  6. 7pt1AcquisitionPlanning.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7pt1AcquisitionPlanning.pdf 7pt1AcquisitionPlanning.pdf PDF icon 7pt1AcquisitionPlanning.pdf More Documents & Publications ACQUISITION PLANNING Acquisitions___Communications.pdf Source Selection

  7. JD Wind 7 Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    JD Wind 7 Wind Farm Jump to: navigation, search Name JD Wind 7 Wind Farm Facility JD Wind 7 Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner...

  8. Radioisotope Thermoelectric Generator F7 Flight Unit Acceptance Buy Off

    SciTech Connect (OSTI)

    1997-02-20

    These are viewgraphs from the subject presentation. The LMMS E-7 history is outlined; Qualification and use of the F-7 GPHS-RTG for the Cassini mission; and the F-7 acceptance test program and performance are described.

  9. Small Business Webinar: March 7 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Webinar: March 7 2013 Small Business Webinar: March 7 2013 On March 7, 29013, the Department of Energy partnered with the U.S. Women's Chamber of Commerce and the ...

  10. HANDBOOK OF ACCELERATOR PHYSICS AND ENGINEERING; SECTIONS 2.7...

    Office of Scientific and Technical Information (OSTI)

    Book: HANDBOOK OF ACCELERATOR PHYSICS AND ENGINEERING; SECTIONS 2.7.1-2.7.5 AND 7.6.2 ON POLARIZATION. Citation Details In-Document Search Title: HANDBOOK OF ACCELERATOR PHYSICS ...

  11. Property:Incentive/Auth7Link | Open Energy Information

    Open Energy Info (EERE)

    Auth7Link Jump to: navigation, search Property Name IncentiveAuth7Link Property Type URL Description Url link to authority. Pages using the property "IncentiveAuth7Link" Showing...

  12. [PATCHED] python/2.7.4 gzip package fails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PATCHED python2.7.4 gzip package fails PATCHED python2.7.4 gzip package fails September 24, 2013 by Doug Jacobsen The modules version of python (python2.7.4) had a bug in...

  13. Policy Flash 2012-7 | Department of Energy

    Energy Savers [EERE]

    7 Policy Flash 2012-7 The Administration continues its emphasis on sustainable acquisition, emphasizing the importance of the program and forecasting changes in the Federal...

  14. PARC Periodical | Volume 7, Issue 3 | Photosynthetic Antenna Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center PARC Periodical | Volume 7, Issue 3 February 16, 2016 PARC Periodical | Volume 7, Issue 3 VIEW ARTICLE HERE News/Media PARC Periodical

  15. Categorical Exclusion Determinations: B7.1 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Categorical Exclusion Determinations: B7.1 Existing Regulations B7.1: Emergency measures under the International Energy Program Planning and implementation of emergency measures...

  16. Energy Department Awards More Than $7 Million for Innovative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Than 7 Million for Innovative Hydrogen Storage Technologies in Fuel Cell Electric Vehicles Energy Department Awards More Than 7 Million for Innovative Hydrogen Storage ...

  17. Louisiana's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Projects in Louisiana's 7th congressional district Lafayette Consolidated Government, LA Smart Grid Project Energy Generation Facilities in Louisiana's 7th congressional district...

  18. Fact #587: September 7, 2009 Cash for Clunkers Program - Fuel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7, 2009 Cash for Clunkers Program - Fuel Economy Improvement Fact 587: September 7, 2009 Cash for Clunkers Program - Fuel Economy Improvement The Car Allowance Rebate System ...

  19. Advisory Committee Meeting Minutes, May 7, 2015 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Committee Meeting Minutes, May 7, 2015 More Documents & Publications May 15, 2014 Methane Hydrates Committee Meeting Agenda Presentations from the May 7, 2015 Advisory...

  20. Klamath Schools (7) Space Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Schools (7) Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Klamath Schools (7) Space Heating Low Temperature Geothermal Facility Facility...

  1. Media Advisory: March 7 Virginia Middle School Science Bowl Tournament...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 7 Virginia Middle School Science Bowl Tournament What: The 2009 Virginia Regional Middle School Science Bowl When: Saturday, March 7, 2009. Round-robin competition will run...

  2. Ohio's 7th congressional district: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    in Ohio's 7th congressional district American Electric Power Co., Inc. Retrieved from "http:en.openei.orgwindex.php?titleOhio%27s7thcongressionaldistrict&oldid197003...

  3. EM SSAB Conference Calls - December 7, 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7, 2011 EM SSAB Conference Calls - December 7, 2011 Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call ...

  4. EM SSAB Conference Calls - August 7, 2008 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7, 2008 EM SSAB Conference Calls - August 7, 2008 Minutes and highlights of the Environmental Management (EM) Site Specific Advisory Board's (SSAB) Bi-Monthly conference call ...

  5. Review Chair Remarks, May 7, 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review Chair Remarks, May 7, 2012 Review Chair Remarks, May 7, 2012 2012 Peer Review Chair remarks PDF icon gtp2012peerreviewchairkbaker.pdf More Documents & Publications 2013 ...

  6. A=7H (1988AJ01)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8AJ01) 7H has not been observed. Attempts have been made to detect it in the spontaneous fission of 252Cf (1982AL33) and in the 7Li(π-, π+) reaction [see (1984AJ01)]. The ground state is calculated to have Jπ = 1/2+ and to be unstable with respect to 1n, 2n, 3n and 4n emission. Excited states are predicted at 4.84, 5.00 and 6.96 MeV, with Jπ = 3/2+ , 5/2+, and 5/2- [(0 + 1)ℏω model space] and at 3.88, 3.94 and 5.99 MeV with Jπ = 3/2+, 5/2+ and 1/2+ [(0 + 2)ℏω model space] (1985PO10).

  7. Detection of high molecular weight organic tracers in vegetation smoke samples by high-temperature gas chromatography-mass spectrometry

    SciTech Connect (OSTI)

    Elias, V.O.; Simoneit, B.R.T. ); Pereira, A.S.; Cardoso, J.N. ); Cabral, J.A. )

    1999-07-15

    High-temperature high-resolution gas chromatography (HTGC) is an established technique for the separation of complex mixtures of high molecular weight (HMW) compounds which do not elute when analyzed on conventional GC columns. The combination of this technique with mass spectrometry is not so common and application to aerosols is novel. The HTGC and HTGC-MS analyses of smoke samples taken by particle filtration from combustion of different species of plants provided the characterization of various classes of HMW compounds reported to occur for the first time in emissions from biomass burning. Among these components are a series of wax esters with up to 58 carbon numbers, aliphatic hydrocarbons, triglycerides, long chain methyl ketones, alkanols and a series of triterpenyl fatty acid esters which have been characterized as novel natural products. Long chain fatty acids with more than 32 carbon numbers are not present in the smoke samples analyzed. The HMW compounds in smoke samples from the burning of plants from Amazonia indicate the input of directly volatilized natural products in the original plants during their combustion. However, the major organic compounds extracted from smoke consist of a series of lower molecular weight polar components, which are not natural products but the result of the thermal breakdown of cellulose and lignin. In contrast, the HMW natural products may be suitable tracers for specific sources of vegetation combustion because they are emitted as particles without thermal alternation in the smoke and can thus be related directly to the original plant material.

  8. Microsoft Word - Cover Page - Exhibit 7

    Energy Savers [EERE]

    7 Northern Pass Project General Area Map of North Section ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . ! . # * # * # * # * # * CANADA White Mountain National Forest White Mountain National Forest VERMONT COOS COUNTY GRAFTON COUNTY CARROLL COUNTY Smith S/S Berlin S/S Littleton S/S Whitefield S/S Lost Nation S/S § ¨ ¦ 93 £ ¤ 3 £ ¤ 2 £ ¤ 302 £ ¤ 3 ! ( 26 ! ( 102 ! ( 16 ! ( 105 ! ( 110 ! ( 135 ! ( 115 ! ( 145 ! ( 142 ! ( 114 ! ( 117 ! ( 253 ! ( 1 ! ( 111 ! ( 147 ! (

  9. OP-JAMI160029 1..7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RECEIVED 2 December 2015 REVISED 17 January 2016 ACCEPTED 11 February 2016 The Medical Science DMZ Sean Peisert, PhD 1,2,3 , William Barnett, PhD 4 , Eli Dart, BS 5 , James Cuff, D.Phil 6 , Robert L Grossman, PhD 7 , Edward Balas, BS 8 , Ari Berman, PhD 9 , Anurag Shankar, PhD 10 , Brian Tierney, MS 5 ABSTRACT .................................................................................................................................................... Objective We describe use cases and an

  10. Certification for DOE O 452.7

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2015-01-15

    DOE O 452.7, Protection of Use Control Vulnerabilities and Designs, dated 5-4-2010, has been reviewed by the Office of Management and Budget and deemed to be in compliance with related Departmental Directives, Secretarial Delegations, organizational structure, budget guidelines, regulations, standards, OMB guidance, relevant memoranda of understanding and public laws. In addition, this directive is not found to cause undue burden (i.e., significant cost impacts, overly prescriptive, redundancy, or excessive reporting requirements) on Departmental elements and contractors.

  11. VII-7 RESEARCH PERSONNEL AND ENGINEERING STAFF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 RESEARCH PERSONNEL AND ENGINEERING STAFF April 1, 1999 - March 31, 2000 FACULTY AND RESEARCH GROUP LEADERS Carl A. Gagliardi, Professor of Physics John C. Hardy, Professor of Physics Che Ming Ko, Professor of Physics Joseph B. Natowitz, Professor of Chemistry, Director Richard P. Schmitt, Professor of Chemistry Robert E. Tribble, Professor of Physics Rand L. Watson, Professor of Ch emistry Sherry J. Yennello, Associate Professor of Chemistry Dave H. Youngblood, Professor of Physics VISITING

  12. AFIP-7 Tomography 2013 Status Report

    SciTech Connect (OSTI)

    Craft, A. E.; Williams, W. J.; Abir, M. I.K.; Wachs, D. M.

    2013-10-01

    This project seeks to assess the geometric stability of the U-Mo monolithic fuel system by evaluating the radiation-induced changes in the AFIP-7 experiment device. Neutron radiography and computed tomography (CT) provide valuable information about the post-irradiation condition of the fuel specimen. Tomographic reconstructions of the AFIP-7 fuel element will be analyzed to assess the geometric condition of the element after irradiation and provide information regarding the condition of the fuel, including gross geometric defects, bowing, twist, plate buckling, cracks, and other defects. The INL, in collaboration with Oregon State University (OSU), Missouri University of Science and Technology (Missouri S&T), and Real Time Tomography, is developing advanced neutron detector systems and tomographic reconstruction techniques to evaluate the AFIP-7 fuel element. Neutron computed tomography using the current neutron radiography technique available at the Neutron Radiography reactor (NRAD) is impractical due to the long time and high cost to produce a set of images for tomographic reconstruction. Advanced neutron radiography systems such as the micro-channel plate (MCP) detector and neutron computed radiography (CR) may reduce the time and cost of acquiring images for neutron CT.

  13. Technique for information retrieval using enhanced latent semantic analysis generating rank approximation matrix by factorizing the weighted morpheme-by-document matrix

    DOE Patents [OSTI]

    Chew, Peter A; Bader, Brett W

    2012-10-16

    A technique for information retrieval includes parsing a corpus to identify a number of wordform instances within each document of the corpus. A weighted morpheme-by-document matrix is generated based at least in part on the number of wordform instances within each document of the corpus and based at least in part on a weighting function. The weighted morpheme-by-document matrix separately enumerates instances of stems and affixes. Additionally or alternatively, a term-by-term alignment matrix may be generated based at least in part on the number of wordform instances within each document of the corpus. At least one lower rank approximation matrix is generated by factorizing the weighted morpheme-by-document matrix and/or the term-by-term alignment matrix.

  14. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...2100354,2178585,2210524,2255308,2219783 "Nitrogen oxide (short tons)" ...7,20.9,21,17.7,31.9,32.2,32.1,33.7,34.7 "Nitrogen oxide",1.6,1.5,1.5,2,1.9,1.8,3.2,3.2,3.2...

  15. Page 7, A Family-Friendly Workplace

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 of 11 Previous Page A Family-Friendly Workplace The Department of Energy (DOE) takes its commitment to recruiting, retaining, and motivating a highly skilled, diverse, and productive workforce very seriously. Our objective is to be the employer of choice in the public sector. The U.S. Department of Energy is the Top-Ranked Cabinet-Level Agency for employee satisfaction and engagement according to the 2005 Best Places to Work in the Federal Government Rankings. Below is a summary of additional

  16. DOE/ER/06035--7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    06035--7 DE85 014321 Technical Progress Report SUPERSONIC METAL CLUSTER BEAMS Department of Ene'rgy Contract No. DE-AS0548ER06035 For Period 3-16-w through 4-l-85 Principal Investigator: R. E. Smalley DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their emptoyecs, makes any warranty, express or implied, or assumes any legal liability or rcspond- bility for

  17. NETL F 580.1-7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 (03/2001) OPI=BL60 (Previous Editions Obsolete) PROPERTY CERTIFICATE U.S. DEPARTMENT OF ENERGY 1. Contractor 3. Contract No. 2. Address 4. Item I or II as applicable: I. There was no residual Government-owned property of any description remaining at the completion of this contract. Therefore, this constitutes a negative reply to the Government request for a final inventory of residual Government-owned property on the subject contract. Signature and Title Date II. A final inventory of residual

  18. W7 printing from VISITOR network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W7 printing from VISITOR network Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "start menu", click on "Devices and Printers" 2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose "create a new port" and pick "Standard TCP/IP Port" from the drop down menu. 4. Type the following for the next box and click "Next": Hostname or IP address: PRINTSERV.slac.stanford.edu Port name: This should be the DNS

  19. WIPP Concludes Zone Recovery Activities for Panel 7 Disposal Pathway

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24, 2015 WIPP Concludes Zone Recovery Activities for Panel 7 Disposal Pathway After months of catch-up rock bolting and contamination mitigation, zone recovery activities along the pathway to Panel 7 have been completed. Panel 7, which consists of seven disposal rooms (see map below), will be the active disposal area when waste emplacement activities resume. Initial closure of Panel 7 Room 7 was completed in May 2015. Although the pathway has been established, a significant number of activities,

  20. An asymptotic formula for polynomials orthonormal with respect to a varying weight. II

    SciTech Connect (OSTI)

    Komlov, A V; Suetin, S P

    2014-09-30

    This paper gives a proof of the theorem announced by the authors in the preceding paper with the same title. The theorem states that asymptotically the behaviour of the polynomials which are orthonormal with respect to the varying weight e{sup −2nQ(x)}p{sub g}(x)/√(∏{sub j=1}{sup 2p}(x−e{sub j})) coincides with the asymptotic behaviour of the Nuttall psi-function, which solves a special boundary-value problem on the relevant hyperelliptic Riemann surface of genus g=p−1. Here e{sub 1}

  1. All-acrylic multigraft copolymers: Effect of side chain molecular weight and volume fraction on mechanical behavior

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Goodwin, Andrew; Wang, Weiyu; Kang, Nam -Goo; Wang, Yangyang; Hong, Kunlun; Mays, Jimmy

    2015-08-21

    We present in this paper the synthesis of poly(n-butyl acrylate)-g-poly(methyl methacrylate) (PnBA-g-PMMA) multigraft copolymers via a grafting-through (macromonomer) approach. The synthesis was performed using two controlled polymerization techniques. The PMMA macromonomer was obtained by high-vacuum anionic polymerization followed by the copolymerization of n-butyl acrylate and PMMA macromonomer using reversible addition–fragmentation chain transfer (RAFT) polymerization to yield the desired all-acrylic multigraft structures. The PnBA-g-PMMA multigraft structures exhibit randomly spaced branch points with various PMMA contents, ranging from 15 to 40 vol %, allowing an investigation into how physical properties vary with differences in the number of branch points and molecular weightmore » of grafted side chains. The determination of molecular weight and polydispersity indices of both the PMMA macromonomer and the graft copolymers was carried out using size exclusion chromatography with triple detection, and the structural characteristics of both the macromonomer and PnBA-g-PMMA graft materials were characterized by 1H and 13C NMR. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was employed for monitoring the macromonomer synthesis. Thermal characteristics of the materials were analyzed using differential scanning calorimetry and thermogravimetric analysis. The mechanical performance of the graft materials was characterized by rheology and dynamic mechanical analysis, revealing that samples with PMMA content of 25–40 vol % exhibit superior elastomeric properties as compared to materials containing short PMMA side chains or <25 vol % PMMA. In conclusion, atomic force microscopy showed a varying degree of microphase separation between the glassy and rubbery components that is strongly dependent on PMMA side chain molecular weight.« less

  2. Analysis of the Relationship Between Vehicle Weight/Size and Safety, and Implications for Federal Fuel Economy Regulation

    SciTech Connect (OSTI)

    Wenzel, Thomas P.

    2010-03-02

    This report analyzes the relationship between vehicle weight, size (wheelbase, track width, and their product, footprint), and safety, for individual vehicle makes and models. Vehicle weight and footprint are correlated with a correlation coefficient (R{sup 2}) of about 0.62. The relationship is stronger for cars (0.69) than for light trucks (0.42); light trucks include minivans, fullsize vans, truck-based SUVs, crossover SUVs, and pickup trucks. The correlation between wheelbase and track width, the components of footprint, is about 0.61 for all light vehicles, 0.62 for cars and 0.48 for light trucks. However, the footprint data used in this analysis does not vary for different versions of the same vehicle model, as curb weight does; the analysis could be improved with more precise data on footprint for different versions of the same vehicle model. Although US fatality risk to drivers (driver fatalities per million registered vehicles) decreases as vehicle footprint increases, there is very little correlation either for all light vehicles (0.01), or cars (0.07) or trucks (0.11). The correlation between footprint and fatality risks cars impose on drivers of other vehicles is also very low (0.01); for trucks the correlation is higher (0.30), with risk to others increasing as truck footprint increases. Fatality risks reported here do not account for differences in annual miles driven, driver age or gender, or crash location by vehicle type or model. It is difficult to account for these factors using data on national fatal crashes because the number of vehicles registered to, for instance, young males in urban areas is not readily available by vehicle type or model. State data on all police-reported crashes can be used to estimate casualty risks that account for miles driven, driver age and gender, and crash location. The number of vehicles involved in a crash can act as a proxy of the number of miles a given vehicle type, or model, is driven per year, and is a preferable unit of exposure to a serious crash than the number of registered vehicles. However, because there are relatively few fatalities in the states providing crash data, we calculate casualty risks, which are the sum of fatalities and serious or incapacitating injuries, per vehicle involved in a crash reported to the police. We can account for driver age/gender and driving location effects by excluding from analysis crashes (and casualties) involving young males and the elderly, and occurring in very rural or very urban counties. Using state data on all police-reported crashes in five states, we find that excluding crashes involving young male and elderly drivers has little effect on casualty risk; however, excluding crashes that occurred in the most rural and most urban counties (based on population density) increases casualty risk for all vehicle types except pickups. This suggests that risks for pickups are overstated unless they account for the population density of the county in which the crashes occur. After removing crashes involving young males and elderly drivers, and those occurring in the most rural and most urban counties, we find that casualty risk in all light-duty vehicles tends to increase with increasing weight or footprint; however, the correlation (R{sup 2}) between casualty risk and vehicle weight is 0.31, while the correlation with footprint is 0.23. These relationships are stronger for cars than for light trucks. The correlation between casualty risk in frontal crashes and light-duty vehicle wheelbase is 0.12, while the correlation between casualty risk in left side crashes and track width is 0.36. We calculated separately the casualty risks vehicles impose on drivers of the other vehicles with which they crash. The correlation between casualty risk imposed by light trucks on drivers of other vehicles and light truck footprint is 0.15, while the correlation with light truck footprint is 0.33; risk imposed on others increases as light truck weight or footprint increases. Our analysis indicates that, after excluding crashes involving young m

  3. RELAP-7 and PRONGHORN Initial Integration Plan

    SciTech Connect (OSTI)

    J. Ortensi; D. Andrs; A.A. Bingham; R.C. Martineau; J.W. Peterson

    2012-05-01

    Modern nuclear reactor safety codes require the ability to solve detailed coupled neutronicthermal fluids problems. For larger cores, this implies fully coupled 3-D spatial dynamics with appropriate feedback models that can provide enough resolution to accurately compute core heat generation and removal during steady and unsteady conditions. The reactor analyis code PRONGHORN is being coupled to RELAP-7 as a first step to extend RELAP's current capabilities. This report details the mathematical models, the type of coupling, and the testing that will be used to produce an integrated system. RELAP-7 is a MOOSE-based application that solves the continuity, momentum, and energy equations in 1-D for a compressible fluid. The pipe and joint capabilities enable it to model parts of the PCU system. The PRONGHORN application, also developed on the MOOSE infrastructure, solves the coupled equations that define the neutron diffusion, fluid flow, and heat transfer in a 3-D core model. Initially, the two systems will be loosely coupled to simplify the transition towards a more complex infrastructure. The integration will be tested with the OECD/NEA MHTGR-350 Coupled Neutronics-Thermal Fluids benchmark model.

  4. C:\\Forms\\2000 forms\\DOE F 3430.7c.cdr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C (4-86) (All Previous Editions Are Obsolete) U.S. Department of Energy PMRSPMS PERFORMANCE RATING NAME TOTAL OF WEIGHTED RATING . . TOTAL OF WEIGHTS SUMMARY RATING SCORE ...

  5. Buildings Energy Data Book: 7.7 Efficiency Standards for Lighting

    Buildings Energy Data Book [EERE]

    Efficiency Standards for Lighting March 2011 7.7.2 Efficiency Standards for General Service Fluorescent Lamps Effective for products manufactured before July 14, 2012 Minimum Nominal Lamp Average Lamp Lamp Type (1) Wattage (W) Minimum CRI Efficacy (lm/W) Effective Date 4-Foot Medium Bipin >35 69 75.0 November 1, 1995 4-Foot Medium Bipin 45 75.0 November 1, 1995 2-Foot U-Shaped >35 69 68.0 November 1, 1995 2-Foot U-Shaped 45 64.0 November 1, 1995 8-Foot Slimline >65 69 80.0 May 1, 1994

  6. RSE Table 5.7 Relative Standard Errors for Table 5.7

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Relative Standard Errors for Table 5.7;" " Unit: Percents." " ",,,"Distillate" " ","Net Demand",,"Fuel Oil",,,"Coal" " ","for ","Residual","and","Natural ","LPG and","(excluding Coal" "End Use","Electricity(a)","Fuel Oil","Diesel Fuel(b)","Gas(c)","NGL(d)","Coke and Breeze)"

  7. Local public document room directory. Revision 7

    SciTech Connect (OSTI)

    1998-04-01

    This directory (NUREG/BR-0088, Revision 7) lists local public document rooms (LPDRs) for commercial nuclear power plants with operating or possession-only licenses or under construction, plus the LPDRs for potential high-level radioactive waste repository sites, gaseous diffusion plants, certain fuel cycle facilities, certain low-level waste disposal facilities, and any temporary LPDRs established for the duration of licensing proceedings. In some instances, the LPDR libraries maintain document collections for more than one licensed facility. The library staff members listed are the persons most familiar with the LPDR collections. Reference librarians in the NRC Headquarters Public Document Room (PDR) are also available to assist the public in locating NRC documents.

  8. table7.2_02.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Average Prices of Purchased Energy Sources, 2002; Level: National and Regional Data; Row: NAICS Codes; Column: All Energy Sources Collected; Unit: U.S. Dollars per Million Btu. Bituminous and NAICS Coal Subbituminous Coal Petroleum Code(a) Subsector and Industry TOTAL Acetylene Breeze Total Anthracite Coal Lignite Coke Coke Total United States RSE Column Factors: 1.1 2.1 0.6 0.9 0.6 0.9 1.4 0.7 0.9 311 Food 6.42 113.78 0 1.46 W 1.46 0 5.18 0 311221 Wet Corn Milling 3.11 106.84 0 1.32 0 1.32 0 0

  9. table7.9_02.xls

    U.S. Energy Information Administration (EIA) Indexed Site

    Expenditures for Purchased Energy Sources, 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources; Unit: Million U.S. Dollars. RSE NAICS Residual Distillate Natural LPG and Coke Row Code(a) Subsector and Industry Total Electricity Fuel Oil Fuel Oil(b) Gas(c) NGL(d) Coal and Breeze Other(e) Factors Total United States RSE Column Factors: 0.9 0.9 1.1 1.5 0.9 1.4 0.8 0.7 1.2 311 Food 6,943 3,707 58 135 2,546 38 276 8 175 8 311221 Wet Corn Milling 683 252 2 1 237 * 165 0

  10. [PATCHED] python/2.7.4 gzip package fails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    [PATCHED] python/2.7.4 gzip package fails [PATCHED] python/2.7.4 gzip package fails September 24, 2013 by Doug Jacobsen The modules version of python (python/2.7.4) had a bug in the default gzip python package. This was due to problems introduced in python 2.7.4 and fixed in python 2.7.5. Receiving a TypeError or structError upon opening and reading a gzip'ped file were the phenotypes of this bug. This has been corrected by installing the python 2.7.5 version of gzip.py into our python

  11. " East North Central",1.7,1.7,1.8,1.8,1.9,2

    U.S. Energy Information Administration (EIA) Indexed Site

    " 5 or More Persons",2.1,2.2,2.3,2,2.2,2.5 "Household Composition" " Households With Children","NA","NA",2,2,2,2.2 " Age of Oldest Child" " Under 7 Years","NA","NA",1.8,1.8,1.8,2...

  12. Table 7.7 Quantity of Purchased Electricity, Natural Gas, and...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... 2,673 W W 22 20 2 W W W 325193 Ethyl Alcohol 7,359 6,597 762 251 81 170 2,825 1,611 ... W W 0 W W 0 0 0 0 325193 Ethyl Alcohol 72 72 0 W 1 W 0 0 0 325199 Other Basic ...

  13. Table 7.7 Quantity of Purchased Electricity, Natural Gas, and...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...2,15,26,17775,0,17775,0.9 325193," Ethyl Alcohol ",1309,1209,101,29,10,20,6861,3255,"Q",4....","W",4,"W","W",0,"W",0.9 325193," Ethyl Alcohol ","*","*",0,"*","*",0,0,0,0,0.7 325199," ...

  14. Resonances in (11)C observed in the (4)He((7)Be, alpha)(7)Be and (4)He((7)Be, p)(10)B reactions

    SciTech Connect (OSTI)

    Freer, M.; Ashwood, N. I.; Curtis, N.; Malcolm, J.; Munoz-Britton, T.; Price, D.; Wheldon, C.; Achouri, N. L.; Demaret, P.; Bardayan, Daniel W; Pain, Steven D; Brown, S.; Catford, W.; Harlin, Christopher W; Thomas, J. S.; Wilson, G.; Chipps, K.; Milin, M.; Raabe, R.; Soic, N.

    2012-01-01

    Measurements of the {sup 4}He({sup 7}Be,{alpha}){sup 7}Be and {sup 4}He({sup 7}Be,p){sup 10}B reactions were performed using {sup 7}Be beam energies of 7.1 and 23 MeV and a helium-4 target, employing the thick target technique. Resonances were observed between E{sub x}({sup 11}C) = 8.6 to 13.8 MeV. An R-matrix analysis was performed to characterize the spins and partial widths. This analysis showed that the observed sequence of states was consistent with that found for {sup 7}Li + {alpha} resonant scattering populating resonances in {sup 11}B. A comparison of the proposed partial widths for decay with the Wigner limit indicates that several of the states are associated with cluster-like structures.

  15. Experimental Station 7-2 | Stanford Synchrotron Radiation Lightsource

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Beamline 7-2 is a wiggler beamline dedicated for X-ray scattering and time-resolved experiments (>0.005 s). 7-2 is equipped with a customized Huber type 5021 6+2 axis...

  16. Chapter 19 NMSA Article 7 | Open Energy Information

    Open Energy Info (EERE)

    to library Legal Document- StatuteStatute: Chapter 19 NMSA Article 7Legal Published NA Year Signed or Took Effect 1978 Legal Citation N.M. Stat. Ann. Art. 19-7 (1978) DOI...

  17. G-7 Energy Ministers Meet in Rome | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    G-7 Energy Ministers Meet in Rome G-7 Energy Ministers Meet in Rome May 6, 2014 - 1:19pm Addthis Damian Bednarz Damian Bednarz Chief of Staff, Office of International Affairs Read ...

  18. March 6 & 7, 2013 Meeting of the Electricity Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 6 & 7, 2013 Meeting of the Electricity Advisory Committee March 6 & 7, 2013 Meeting of the Electricity Advisory Committee Note: This meeting has been cancelled Due to a ...

  19. RAPID/Roadmap/7 (1) | Open Energy Information

    Open Energy Info (EERE)

    including a PPA for new QFs under 20 MW. 7.3 to 7.4 - Is the Facility an Independent Power Producer That Exclusively Sells to Wholesale Customers? Independent power producers...

  20. RAPID/Roadmap/7 (2) | Open Energy Information

    Open Energy Info (EERE)

    for the proposed project (18 CFR 5.9(c)). 7.5 to 7.6 - Is the Facility an Independent Power Producer That Exclusively Sells to Wholesale Customers? Independent power producers...

  1. Energy Department Invests Over $7 Million to Deploy Tribal Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Over 7 Million to Deploy Tribal Clean Energy Projects Energy Department Invests Over 7 ... The wind turbine is expected to generate about 50% of the electricity used on the ...

  2. Fact #889: September 7, 2015 Average Diesel Price Lower than...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9: September 7, 2015 Average Diesel Price Lower than Gasoline for the First Time in Six Years Fact 889: September 7, 2015 Average Diesel Price Lower than Gasoline for the First ...

  3. Acquisition Planning: Revised DOE Acquisition Guide Chapter 7...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition Planning: Revised DOE Acquisition Guide Chapter 7.1 Acquisition Guide Chapter 7.1 is revised to remind the planner when planning for an interagency acquisition to ...

  4. Fact #828: July 7, 2014 Japanese Auto Manufacturers Increase...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: July 7, 2014 Japanese Auto Manufacturers Increase Domestic Production for U.S. Sales Fact 828: July 7, 2014 Japanese Auto Manufacturers Increase Domestic Production for U.S. ...

  5. MPI errors from cray-mpich/7.3.0

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MPI errors from cray-mpich7.3.0 MPI errors from cray-mpich7.3.0 January 6, 2016 by Ankit Bhagatwala A change in the MPICH2 library that now strictly enforces non-overlapping...

  6. EVMS Training Snippet: 1.7 DOE EVMS Certification | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE EVMS Certification EVMS Training Snippet: 1.7 DOE EVMS Certification This EVMS Training Snippet, sponsored by the Office of Project Management (PM), covers the DOE Earned ...

  7. WORKSHOP: SUSTAINABILITY IN MANUFACTURING, JANUARY 6-7 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    January 6, 2016 8:00AM EST to January 7, 2016 4:00PM EST The Advanced Manufacturing Office (AMO) is planning to host a workshop in Portland, Oregon on January 6-7, 2016. The topic...

  8. Electrical Dist No7 Maricopa | Open Energy Information

    Open Energy Info (EERE)

    Electrical Dist No7 Maricopa Jump to: navigation, search Name: Electrical Dist No7 Maricopa Place: Arizona Phone Number: 623-935-6253 Outage Hotline: 623-935-6253 References: EIA...

  9. Energy Department Announces $7 Million to Reduce Non-Hardware...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Million to Reduce Non-Hardware Costs of Solar Energy Systems Energy Department Announces 7 Million to Reduce Non-Hardware Costs of Solar Energy Systems November 15, 2011 - ...

  10. April 7 Webinar on OE's Resilient Electricity Delivery Infrastructure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    April 7 Webinar on OE's Resilient Electricity Delivery Infrastructure Initiative FOA March 23, 2015 - 10:25am Addthis On April 7, Dan Ton, Acting Deputy Assistant Secretary, Dr. ...

  11. Chapter 7: Landscape Design and Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Landscape Design and Management Chapter 7: Landscape Design and Management Chapter 7 of the LANL Sustainable Design Guide contains information on landscape issues at LANL, stormwater management, using water outdoors, parking pavement, landscape vegetation and exterior lighting. PDF icon sustainable_guide_ch7.pdf More Documents & Publications Chapter 3: Building Siting National Best Practices Manual for Building High Performance Schools LANL Sustainable Design Guide - Appendices

  12. Workers' Spotlight Newsletter - Issue 7 | Department of Energy

    Energy Savers [EERE]

    7 Workers' Spotlight Newsletter - Issue 7 May 2013, Issue 7 Workers' Spotlight newsletter is a monthly publication that provides information regarding the Energy Employees Occupational Illness Compensation Program and the Former Worker Medical Screening Program. May 2013 issue covers: WHPP and BTMed Roster Updates Director's Note Staff Trivia WHPP Video Acknowledgement. Calendar PDF icon Workers' Spotlight Newsletter - Issue 7 More Documents & Publications Workers' Spotlight Newsletter -

  13. Developing Fully Coupled Subchannel Model in RELAP-7

    SciTech Connect (OSTI)

    Hongbin Zhang; Ling Zou; Haihua Zhao; Richard Martineau

    2014-09-01

    This is a DOE milestone report documenting the implementation of the subchannel model into the RELAP-7 code.

  14. EERE Program Management Guide - Chapter 7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 EERE Program Management Guide - Chapter 7 Chapter 7 of this guide includes general program analysis and evaluation concepts such as monitoring work performance, GPRA requirements, evaluation activities, and the EERE SMS program analysis and evaluation stage. PDF icon pmguide_chapter_7.pdf More Documents & Publications EERE Program Management Quick Reference Guide EERE Program Management Guide - Chapter 2 EERE Program Management Guide - Appendix O

  15. PARC Periodical | Volume 7, Issue 1 | Photosynthetic Antenna Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center 1 October 12, 2015 PARC Periodical | Volume 7, Issue 1 VIEW ARTICLE HERE News/Media

  16. Washington's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    7th congressional district ARCH Venture Partners (Washington) Northwest National Marine Renewable Energy Center Washington Technology Center Registered Networking...

  17. Track 7: Environmental Protection, Environmental Management System (EMS), "Greening Initiatives"

    Broader source: Energy.gov [DOE]

    ISM Workshop Presentations Knoxville Convention Center, Knoxville, TN August 2009 Track 7: Environmental Protection, Environmental Management System (EMS), "Greening Initiatives"

  18. Army Announces $7 Billion Action to Support Renewable Energy

    Broader source: Energy.gov [DOE]

    The U.S. Army announced on August 7 that it has issued a $7 billion Request for Proposal to procure renewable and alternative energy on federal property through power purchase agreements. The $7 billion capacity would be expended for the purchase of energy over 30 years or less from renewable energy plants that are constructed and operated by contractors using private sector financing.

  19. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...483,35540,33388,30756,31875,32629,31239 "Nitrogen oxide (short tons)" ...1,5.3,4.3,3.3,8.1,8.4,11.7,10.2,9.9,9.7 "Nitrogen oxide",1.9,2.3,1.9,1.7,2.6,3,4.1,3.5,4.3...

  20. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...884,61313,56669,60800,53660,53579,51801 "Nitrogen oxide (short tons)" ...2,4.1,4,4.4,4.8,4.8,5.2,5.3,4.8,4.7,4.8 "Nitrogen oxide",1.4,1.7,1.9,2.5,2.4,2.9,2.8,2.7,4...

  1. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...8162,273797,259611,175375,129536,123261 "Nitrogen oxide (short tons)" ...4.6,4.7,5.1,4.7,4.5,6.9,6.6,4.8,3.5,3.2 "Nitrogen oxide",1.6,1.6,1.6,1.6,1.6,1.7,1.8,2.1,2...

  2. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...392,29334,27230,32433,38613,54224,57579 "Nitrogen oxide (short tons)" ...3.5,3.4,5.7,6.6,4.5,1.9,1.7,2,2.6,4,3.3 "Nitrogen oxide",0.5,0.5,0.7,0.4,0.5,0.5,0.5,0.6,0...

  3. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...2604,433892,489817,442655,390723,401051 "Nitrogen oxide (short tons)" ...9,9.2,10.1,9.7,8.7,8.6,10.3,9.9,8.7,9.4 "Nitrogen oxide",1.1,1,1,0.9,1,0.8,1,1,1.8,1.8,2,2...

  4. Method for solubilization of low-rank coal using low molecular weight cell-free filtrates derived from cultures of Coriolus versicolor

    SciTech Connect (OSTI)

    Stewart, D.L.; Fredrickson, J.K.; Campbell, J.A.; Pyne, J.W. Jr.; Bean, R.M.; Wilson, B.W.

    1992-01-28

    This patent describes a method for isolating an extracellular product derived from a broth of Coriolus versicolor. It comprises separating the cells from a broth of C. versicolor to obtain a cell-free filtrate; separating from the cell-free filtrate a fraction containing molecules of molecular weight in the range of about 500 to 1000 daltons. This patent also describes a method for degrading low-rank coal to a water-soluble material. It comprises contacting the low-rank coal with a cell-free fraction from the broth of Coriolus versicolor containing molecules in the molecular weight range of about 500 to 1000 daltons.

  5. RDamage 6, 7, 8 & 9 Cassettes

    SciTech Connect (OSTI)

    Griego, Jeffrey R [Los Alamos National Laboratory; Kaul, Ann [Los Alamos National Laboratory

    2012-06-08

    The RDamage series of ten experiments is part of a long-term collaboration with RFNC/VNIIEF in pulsed power technology. These experiments use a cylindrical configuration to study spallation damage, which allows for a natural recollection of the damaged material under proper driving conditions and post-shot collection of the damaged target material for subsequent metallographic analysis. Dynamic insitu experimental velocimetry diagnostics are also employed. LANL is responsible for the design of the experimental load and velocimetry system. VNIIEF is responsible for the design and construction of the driving explosive magnetic generator. In the RDamage-0, -1 and -2 experiments, data was collected about failure initiation of a well-characterized material (aluminum) in a cylindrical geometry. The RDamage-3, -4 and -5 experiments produced data on the behavior of material recollected after damage from pressures in the damage initiation regime. Data on the behavior of material recollected after complete failure was collected in the RDamage-6, -7, -8 and -9 experiments. This presentation shows the evolution of the load assembly through the experimental series.

  6. Subtask 7.1 - Strategic Studies

    SciTech Connect (OSTI)

    Thomas Erickson

    2009-03-30

    The Energy & Environmental Research Center (EERC) has recently completed 11 years of research through the Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) focused on fossil energy technology development and demonstration. To support a significant number of the different activities being considered within all of our research contracts with NETL, a subtask (7.1 Strategic Studies) was created to focus on small research efforts that came up throughout the year which would support an existing EERC-NETL project or would help to develop a new concept for inclusion in future efforts. Typical efforts conducted under this task were usually between $15,000 and $60,000 in scope and had time lines of less than 6 months. A limited number of larger studies were also conducted, generally at the direct request of NETL. Over the life of this task, 46 projects were conducted. These efforts ranged from quick experiments to gain fundamental knowledge to support a current effort, to literature reviews, to a few larger engineering efforts.

  7. Protocadherin-7 induces bone metastasis of breast cancer

    SciTech Connect (OSTI)

    Li, Ai-Min; Tian, Ai-Xian; Zhang, Rui-Xue; Ge, Jie; Key Laboratory of Breast Cancer Prevention and Treatment of the Ministry of Education, Tianjin Medical University Cancer Institute and Hospital, Tianjin ; Sun, Xuan; Cao, Xu-Chen; Key Laboratory of Breast Cancer Prevention and Treatment of the Ministry of Education, Tianjin Medical University Cancer Institute and Hospital, Tianjin

    2013-07-05

    Highlights: PCDH7 is overexpression in high bone metastatic MDA-MB-231 cells. PCDH7 is up-regulation in bone metastatic breast cancer tissues. Suppression of PCDH7 inhibits cell proliferation, migration, and invasion in vitro. PCDH7 induces breast cancer bone metastasis in vivo. -- Abstract: Breast cancer had a propensity to metastasize to bone, resulting in serious skeletal complications associated with poor outcome. Previous study showed that Protocadherin-7 (PCDH7) play an important role in brain metastatic breast cancer, however, the role of PCDH7 in bone metastatic breast cancer has never been explored. In the present study, we found that PCDH7 expression was up-regulation in bone metastatic breast cancer tissues by real-time PCR and immunohistochemistry assays. Furthermore, suppression of PCDH7 inhibits breast cancer cell proliferation, migration, and invasion in vitro by MTT, scratch, and transwell assays. Most importantly, overexpression of PCDH7 promotes breast cancer cell proliferation and invasion in vitro, and formation of bone metastasis in vivo. These data provide an important insight into the role of PCDH7 in bone metastasis of breast cancer.

  8. Low Speed Technology for Small Turbine Development Reaction Injection Molded 7.5 Meter Wind Turbine Blade

    SciTech Connect (OSTI)

    David M. Wright; DOE Project Officer - Keith Bennett

    2007-07-31

    An optimized small turbine blade (7.5m radius) was designed and a partial section molded with the RIM (reaction-injection molded polymer) process for mass production. The intended market is for generic three-bladed wind turbines, 100 kilowatts or less, for grid-assist end users with rural and semi-rural sites, such as the farm/ranch market, having low to moderate IEC Class 3-4 wind regimes. This blade will have substantial performance improvements over, and be cheaper than, present-day 7.5m blades. This is made possible by the injection-molding process, which yields high repeatability, accurate geometry and weights, and low cost in production quantities. No wind turbine blade in the 7.5m or greater size has used this process. The blade design chosen uses a RIM skin bonded to a braided infused carbon fiber/epoxy spar. This approach is attractive to present users of wind turbine blades in the 5-10m sizes. These include rebladeing California wind farms, refurbishing used turbines for the Midwest farm market, and other manufacturers introducing new turbines in this size range.

  9. SU-F-18C-12: On the Relationship of the Weighted Dose to the Surface Dose In Abdominal CT - Patient Size Dependency

    SciTech Connect (OSTI)

    Zhou, Y; Scott, A; Allahverdian, J

    2014-06-15

    Purpose: It is possible to measure the patient surface dose non-invasively using radiolucent dosimeters. However, the patient size specific weighted dose remains unknown. We attempted to study the weighted dose to surface dose relationship as the patient size varies in abdominal CT. Methods: Seven abdomen phantoms (CIRS TE series) simulating patients from an infant to a large adult were used. Size specific doses were measured with a 100 mm CT chamber under axial scans using a Siemens Sensation 64 (mCT) and a GE 750 HD. The scanner settings were 120 kVp, 200 mAs with fully opened collimations. Additional kVps (80, 100, 140) were added depending on the phantom sizes. The ratios (r) of the weighted CT dose (Dw) to the surface dose (Ds) were related to the phantom size (L) defined as the diameter resulting the equivalent cross-sectional area. Results: The Dw versus Ds ratio (r) was fitted to a linear relationship: r = 1.083 − 0.007L (R square = 0.995), and r = 1.064 − 0.007L (R square = 0.953), for Siemens Sensation 64 and GE 750 HD, respectively. The relationship appears to be independent of the scanner specifics. Conclusion: The surface dose to the weighted dose ratio decreases linearly as the patient size increases. The result is independent of the scanner specifics. The result can be used to obtain in vivo CT dosimetry in abdominal CT.

  10. Low-temperature oxidative degradation of PBX 9501 and its components determined via molecular weight analysis of the poly [ester urethane] binder

    SciTech Connect (OSTI)

    Kress, Joel D

    2008-01-01

    The results of following the oxidative degradation of a plastic-bonded explosive (PBX 9501) are reported. Into over 1100 sealed containers were placed samples of PBX 9501 and combinations of its components and aged at relatively low temperatures to induce oxidative degradation of the samples. One of the components of the explosive is a poly(ester urethane) polymer and the oxidative degradation of the samples were following by measuring the molecular weight change of the polymer by gel permeation chromatography (coupled with both differential refractive index and multiangle laser light scattering detectors). Multiple temperatures between 40 and 64 {sup o}C were used to accelerate the aging of the samples. Interesting induction period behavior, along with both molecular weight increasing (crosslinking) and decreasing (chain scissioning) processes, were found at these relatively mild conditions. The molecular weight growth rates were fit to a random crosslinking model for all the combinations of components. The fit rate coefficients show Arrhenius behavior and activation energies and frequency factors were obtained. The kinetics of molecular weight growth shows a compensatory effect between the Arrhenius prefactors and activation energies, suggesting a common degradation process between PBX 9501 and the various combinations of its constituents. An oxidative chemical mechanism of the polymer is postulated, consistent with previous experimental results, that involves a competition between urethane radical crosslinking and carbonyl formation.

  11. Calculation of Design Parameters for an Equilibrium LEU Core in the NBSR using a U7Mo Dispersion Fuel

    SciTech Connect (OSTI)

    Hanson A. L.; Diamond D.

    2014-06-30

    A plan is being developed for the conversion of the NIST research reactor (NBSR) from high-enriched uranium (HEU) fuel to low-enriched uranium (LEU) fuel. The LEU fuel may be a monolithic foil (LEUm) of U10Mo (10% molybdenum by weight in an alloy with uranium) or a dispersion of U7Mo in aluminum (LEUd). A previous report provided neutronic calculations for the LEUm fuel and this report presents the neutronics parameters for the LEUd fuel. The neutronics parameters for the LEUd fuel are compared to those previously obtained for the present HEU fuel and the proposed LEUm fuel. The results show no significant differences between the LEUm and the LEUd other than the LEUd fuel requires slightly less uranium than the LEUm fuel due to less molybdenum being present. The calculations include kinetics parameters, reactivity coefficients, reactivity worths of control elements and abnormal configurations, and power distributions under normal operation and with misloaded fuel elements.

  12. Tetraspanin 7 (TSPAN7) expression is upregulated in multiple myeloma patients and inhibits myeloma tumour development in vivo

    SciTech Connect (OSTI)

    Cheong, Chee Man; Chow, Annie W.S.; Fitter, Stephen; Hewett, Duncan R.; Martin, Sally K.; Williams, Sharon A.; To, L. Bik; and others

    2015-03-01

    Background: Increased expression of the tetraspanin TSPAN7 has been observed in a number of cancers; however, it is unclear how TSPAN7 plays a role in cancer progression. Methods: We investigated the expression of TSPAN7 in the haematological malignancy multiple myleoma (MM) and assessed the consequences of TSPAN7 expression in the adhesion, migration and growth of MM plasma cells (PC) in vitro and in bone marrow (BM) homing and tumour growth in vivo. Finally, we characterised the association of TSPAN7 with cell surface partner molecules in vitro. Results: TSPAN7 was found to be highly expressed at the RNA and protein level in CD138{sup +} MM PC from approximately 50% of MM patients. TSPAN7 overexpression in the murine myeloma cell line 5TGM1 significantly reduced tumour burden in 5TGM1/KaLwRij mice 4 weeks after intravenous adminstration of 5TGM1 cells. While TSPAN7 overexpression did not affect cell proliferation in vitro, TSPAN7 increased 5TGM1 cell adhesion to BM stromal cells and transendothelial migration. In addition, TSPAN7 was found to associate with the molecular chaperone calnexin on the cell surface. Conclusion: These results suggest that elevated TSPAN7 may be associated with better outcomes for up to 50% of MM patients. - Highlights: • TSPAN7 expression is upregulated in newly-diagnosed patients with active multiple myeloma. • Overexpression of TSPAN7 inhibits myeloma tumour development in vivo. • TSPAN7 interacts with calnexin at the plasma membrane in a myeloma cell line.

  13. RSE Table 7.4 Relative Standard Errors for Table 7.4

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Relative Standard Errors for Table 7.4;" " Unit: Percents." " ",," "," ",," "," " "Economic",,"Residual","Distillate","Natural ","LPG and" "Characteristic(a)","Electricity","Fuel Oil","Fuel Oil(b)","Gas(c)","NGL(d)","Coal" ,"Total United States" "Value of Shipments and Receipts"

  14. RSE Table 7.5 Relative Standard Errors for Table 7.5

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Relative Standard Errors for Table 7.5;" " Unit: Percents." " ",," "," ",," "," " "Economic",,"Residual","Distillate","Natural ","LPG and" "Characteristic(a)","Electricity","Fuel Oil","Fuel Oil(b)","Gas(c)","NGL(d)","Coal" ,"Total United States" "Value of Shipments and Receipts"

  15. SU-F-18C-14: Hessian-Based Norm Penalty for Weighted Least-Square CBCT Reconstruction

    SciTech Connect (OSTI)

    Sun, T; Sun, N; Tan, S; Wang, J

    2014-06-15

    Purpose: To develop a Hessian-based norm penalty for cone-beam CT (CBCT) reconstruction that has a similar ability in suppressing noise as the total variation (TV) penalty while avoiding the staircase effect and better preserving low-contrast objects. Methods: We extended the TV penalty to a Hessian-based norm penalty based on the Frobenius norm of the Hessian matrix of an image for CBCT reconstruction. The objective function was constructed using the penalized weighted least-square (PWLS) principle. An effective algorithm was developed to minimize the objective function using a majorization-minimization (MM) approach. We evaluated and compared the proposed penalty with the TV penalty on a CatPhan 600 phantom and an anthropomorphic head phantom, each acquired at a low-dose protocol (10mA/10ms) and a high-dose protocol (80mA/12ms). For both penalties, contrast-to-noise (CNR) in four low-contrast regions-of-interest (ROIs) and the full-width-at-half-maximum (FWHM) of two point-like objects in constructed images were calculated and compared. Results: In the experiment of CatPhan 600 phantom, the Hessian-based norm penalty has slightly higher CNRs and approximately equivalent FWHM values compared with the TV penalty. In the experiment of the anthropomorphic head phantom at the low-dose protocol, the TV penalty result has several artificial piece-wise constant areas known as the staircase effect while in the Hessian-based norm penalty the image appears smoother and more similar to that of the FDK result using the high-dose protocol. Conclusion: The proposed Hessian-based norm penalty has a similar performance in suppressing noise to the TV penalty, but has a potential advantage in suppressing the staircase effect and preserving low-contrast objects. This work was supported in part by National Natural Science Foundation of China (NNSFC), under Grant Nos. 60971112 and 61375018, and Fundamental Research Funds for the Central Universities, under Grant No. 2012QN086.

  16. Chapter 7 - Advancing Systems and Technologies to Produce Cleaner Fuels |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 7 - Advancing Systems and Technologies to Produce Cleaner Fuels Chapter 7 - Advancing Systems and Technologies to Produce Cleaner Fuels Chapter 7 - Advancing Systems and Technologies to Produce Cleaner Fuels Fuels play a critical role throughout our economy. In 2013, fuels directly supplied about 99% of the energy needed by our national transportation system, 66% of that needed to generate our electricity, 68% of that needed by our industry, and 27% of that needed by our

  17. Major Communications Report May 7, 2009 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7, 2009 Major Communications Report May 7, 2009 This file includes the Department of Energy's major announcements regarding the Recovery Act such as press releases, videos, press events or other major communications for the week of May 7, 2009. Office spreadsheet icon DOE_Major_Communications_05072009.xls More Documents & Publications Major Communications Report April 17, 2009 Major Communications Report May 5, 2009 Major Communications Report April 30

  18. Across the Pond Newsletter Issue 7 | Department of Energy

    Energy Savers [EERE]

    7 Across the Pond Newsletter Issue 7 A Quarterly Update on Joint UK NDA/US DOE Activities and Initiatives Issue 7: Spring 2012. In this issue: DOE and UK NDA Renew Information Exchange Agreement Topic Area Update and Future Plans International Collaboration: Development of Cryograb Technology for Waste Retrieval Transferring Best Practice in Research and Development Collaboration in Plutonium Management Moves to the Next Level Organizational Changes in NDA and DOE-EM PDF icon Across the Pond

  19. DOE Announces Up to $7 Million for Technology Commercialization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acceleration | Department of Energy Up to $7 Million for Technology Commercialization Acceleration DOE Announces Up to $7 Million for Technology Commercialization Acceleration August 29, 2008 - 3:20pm Addthis WASHINGTON - DOE Principal Deputy Assistant Secretary for Energy Efficiency and Renewable Energy John Mizroch today announced the availability of up to $7 million to accelerate the movement of clean energy technologies from DOE's world-class national laboratories to the marketplace. The

  20. 2008 Annual Merit Review Results Summary - 7. Combustion Research |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 7. Combustion Research 2008 Annual Merit Review Results Summary - 7. Combustion Research DOE Vehicle Technologies Annual Merit Review PDF icon 2008_merit_review_7.pdf More Documents & Publications 2008 Annual Merit Review Results Summary - 8. High Efficiency Clean Combustion and Enabling Technologies 2008 Annual Merit Review Results Summary - 9. Emission Control and Aftertreatment 2012 Annual Merit Review Results Report - Advanced Combustion Engine Technologies

  1. DOE Organization Chart - August 7, 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Organization Chart - August 7, 2013 DOE Organization Chart - August 7, 2013 The DOE Organization Chart is a diagram of the U.S. Department of Energy's structure along with the relationships and relative ranks of its parts and positions/jobs. PDF icon DOE Organization Chart - August 7, 2013 More Documents & Publications DOE Organization Chart - May 2, 2014 DOE Organization Chart - October 2014 DOE Organization Chart - April 8, 2014

  2. April 7 Webinar on OE's Resilient Electricity Delivery Infrastructure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative FOA | Department of Energy 7 Webinar on OE's Resilient Electricity Delivery Infrastructure Initiative FOA April 7 Webinar on OE's Resilient Electricity Delivery Infrastructure Initiative FOA March 23, 2015 - 10:25am Addthis On April 7, Dan Ton, Acting Deputy Assistant Secretary, Dr. Imre Gyuk, Manager of the Energy Storage Program, and Dr. Carol Hawk, Manager of the Cybersecurity for Energy Delivery Systems Program, will be featured speakers during a webinar on OE's resiliency

  3. FTCP Quarterly Report on Federal Technical Capability, December 7, 2015 |

    Energy Savers [EERE]

    Department of Energy 7, 2015 FTCP Quarterly Report on Federal Technical Capability, December 7, 2015 This Quarterly Report on the Federal Technical Capability Program (FTCP) contains information on the status of qualifications in the Technical Qualification Program (TQP) and technical skill gaps, on a quarterly basis. Report also displays trend data for overall TQP qualification and staffing shortfalls. PDF icon Quarterly Report on Federal Technical Capability 12-7-2015

  4. SEP Request for Approval Form 7 - Other Situations for Consumption

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adjustment | Department of Energy 7 - Other Situations for Consumption Adjustment SEP Request for Approval Form 7 - Other Situations for Consumption Adjustment File SEP-Request-for-Approval-Form-7_Other-Situations-for-Consumption-Adjustment.docx More Documents & Publications SEP Request for Approval Form 6 - Non-Routine Adjustments SEP Request for Approval Form 5 - Model Does Not Satisfy 3.4.1-3.4.10 Requirements SEP Request for Approval Form 4 - Alternative Adjustment Model Application

  5. Acquisition Planning: Revised DOE Acquisition Guide Chapter 7.1 |

    Office of Environmental Management (EM)

    Department of Energy Planning: Revised DOE Acquisition Guide Chapter 7.1 Acquisition Planning: Revised DOE Acquisition Guide Chapter 7.1 Acquisition Guide Chapter 7.1 is revised to remind the planner when planning for an interagency acquisition to perform a determination of best procurement approach, business case analysis and/or Economy Act determinations and findings, as applicable, in accordance with Federal Acquisition Regulation (FAR) 17.5 Interagency Acquisitions. Revisions to the

  6. Idaho National Laboratory - WAG-7 | Department of Energy

    Office of Environmental Management (EM)

    National Laboratory - WAG-7 Idaho National Laboratory - WAG-7 January 1, 2014 - 12:00pm Addthis US Department of Energy Groundwater Database Groundwater Master Report InstallationName, State: Idaho National Laboratory, ID Responsible DOE Office: Office of Nuclear Energy Plume Name: WAG-7 Remediation Contractor: CWI PBS Number: 30 Report Last Updated: 2014 Contaminants Halogenated VOCs/SVOCs Present?: Yes VOC Name Concentration (ppb) Regulatory Driver Cleanup Requirement CCI4 5.43 Yes 5 Fuel

  7. Energy Department Awards More Than $7 Million for Innovative Hydrogen

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Storage Technologies in Fuel Cell Electric Vehicles | Department of Energy More Than $7 Million for Innovative Hydrogen Storage Technologies in Fuel Cell Electric Vehicles Energy Department Awards More Than $7 Million for Innovative Hydrogen Storage Technologies in Fuel Cell Electric Vehicles December 12, 2011 - 2:13pm Addthis News Media Contact (202) 586-4940 Washington, D.C. - The U.S. Department of Energy today announced more than $7 million to fund four projects in California, Washington

  8. Buildings Energy Data Book: 5.7 Appliances

    Buildings Energy Data Book [EERE]

    5 Major Residential and Small Commercial Appliance Lifetimes, Ages, and Replacement Picture Typical Service Average 2005 Average Lifetime Range Lifetime Stock Age Units to be Replaced Appliance Type (years) (years) (years) During 2011 (thousands) Refrigerators (1) 10 - 16 12 7.8 9,217 Freezers 8 - 16 11 11.3 2,215 Microwave Ovens 7 - 10 9 N.A. Ranges (2) Electric 12 - 19 16 N.A. 4,281 Gas 14 - 22 17 N.A. 2,854 Clothes Washers 7 - 14 11 N.A. 7,362 Clothes Dryers Electric 8 - 15 12 N.A. 5,095 Gas

  9. Figure 7. Projected Production for the High Development Rate...

    U.S. Energy Information Administration (EIA) Indexed Site

    7. Projected Production for the High Development Rate of Technically Recoverable Oil Estimated at 5 Percent, Mean, and 95 Percent Probabilities for the ANWR Coastal Plain of the...

  10. Maryland's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    US Recovery Act Smart Grid Projects in Maryland's 7th congressional district Baltimore Gas and Electric Company Smart Grid Project Registered Energy Companies in...

  11. Accident Investigation of the February 7, 2013, Scissor Lift...

    Energy Savers [EERE]

    February 7, 2013, Scissor Lift Accident in the West Hackberry Brine Tank-14 Resulting in Injury, Strategic Petroleum Reserve West Hackberry, LA Accident Investigation of the ...

  12. Beryllium-7 labeled carbon particles and method of making

    DOE Patents [OSTI]

    Richards, Powell; Mausner, Leonard F.; Prach, Thomas F.

    1987-01-01

    Beryllium-7 labeled carbon particles made from the proton irradiation of carbon materials, preferably from dry carbon black are disclosed. Such particles are useful as gamma emitting radiotracers.

  13. Arizona's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    in Arizona's 7th congressional district Agenera, LLC Amereco Biofuels Corp Arizona Public Service Company APS Arizona Solar Tech EDGE Energy LLC EGreenIdeas Ecotality North...

  14. Chapter 7: Advancing Systems and Technologies to Produce Cleaner...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... that perform well in harsh environments; sensor applications that make use of nanotechnology; Quadrennial Technology Review 2015 5 TA 7.E: Natural Gas Delivery Infrastructure ...

  15. DOE F 3430.7B | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F 3430.7B Form provides additional space for completing the employee appraisal plan. PDF icon PERFORMANCE APPRAISAL PLAN (Continuation Sheet) More Documents & Publications DOE F ...

  16. Homeland Security Presidential Directive HSPD-7 (December 17...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon HSPD-7.pdf More Documents & Publications National Infrastructure Protection Plan DOE O 206.2 Identity, Credential, and Access Management (ICAM) Energy Emergency ...

  17. Microsoft Word - S08562_6_7_8_GW_021512

    Office of Legacy Management (LM)

    Report Calendar Year 2011 September 2012 LMSMNDS08562 This page intentionally left blank LMSMNDS08562 Mound, Ohio, Site Parcel 6, 7, and 8 Groundwater Monitoring Report ...

  18. Beryllium-7 labeled carbon particles and method of making

    DOE Patents [OSTI]

    Richards, P.; Mausner, L.F.; Prach, T.F.

    1987-11-17

    Beryllium-7 labeled carbon particles made from the proton irradiation of carbon materials, preferably from dry carbon black are disclosed. Such particles are useful as gamma emitting radiotracers.

  19. Tennessee's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Companies in Tennessee's 7th congressional district Agri Energy Inc Biofuels America Inc Eco Energy Inc Memphis Biofuels LLC Nashville Electric Service NES Ocean Motion...

  20. Virginia's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    You can help OpenEI by expanding it. This page represents a congressional district in Virginia. Registered Energy Companies in Virginia's 7th congressional district Enviva...

  1. Energy Department Announces Up to $7 Million to Expand Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Up to 7 Million to Expand Clean Energy and Energy Efficiency on Tribal Lands Energy ... energy systems that can provide electricity, heating, or cooling to many buildings ...

  2. Chapter 7: Advancing Systems and Technologies to Produce Cleaner...

    Energy Savers [EERE]

    ... Strategies that utilize waste heat to reduce the energy ... of currently available internal combustion engines. 7. Systems ... vs. localized combined heat and power in contrast to ...

  3. FY 2008 Progress Report for Lightweighting Materials - 7. Low...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2008 Progress Report for Lightweighting Materials - 7. Low-Cost Carbon Fiber Lightweighting Materials focuses on the development and validation of advanced materials and ...

  4. North Carolina's 7th congressional district: Energy Resources...

    Open Energy Info (EERE)

    American Distillation Inc Chemtex Coastal Carolina Clean Power CCCP GE Hitachi Nuclear Energy Retrieved from "http:en.openei.orgwindex.php?titleNorthCarolina%27s7th...

  5. Headquarters Facilities Master Security Plan- Chapter 7, Surveys and Reviews

    Broader source: Energy.gov [DOE]

    2016 Headquarters Facilities Master Security Plan - Chapter 7, Surveys and Reviews Describes DOE Headquarters procedures for conducting various types of security reviews and assessments and correcting findings.

  6. Energy Literacy Social Studies Guide - Essential Principle 7...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    impact the environment? Summary Discussion points related to Essential Principle 7: The quality of life of individuals and societies is affected by energy choices. Curriculum...

  7. Michigan's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Energy Companies in Michigan's 7th congressional district Astraeus Wind Energy Inc Biofuel Industries Group LLC Granger Electric Company Tecumseh Products Company Retrieved...

  8. RAPID/Roadmap/7-FD-c | Open Energy Information

    Open Energy Info (EERE)

    Solar Tools Contribute Contact Us PURPA Qualifying Facility Certification Process (7-FD-c) If the facility is a cogeneration facility or a small power production facility the...

  9. Beryllium-7 labeled carbon particles and method of making

    DOE Patents [OSTI]

    Richards, P.; Mausner, L.F.; Prach, T.F.

    1985-04-29

    Beryllium-7 labeled carbon particles made from the proton irradiation of carbon materials, preferably from dry carbon black are disclosed. Such particles are useful as gamma emitting radiotracers.

  10. RAPID/Roadmap/7-FD-s | Open Energy Information

    Open Energy Info (EERE)

    7-FD-s < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar Tools...

  11. RAPID/Roadmap/7-CA-f | Open Energy Information

    Open Energy Info (EERE)

    RAPIDRoadmap7-CA-f < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower...

  12. RAPID/Roadmap/7-VT-a | Open Energy Information

    Open Energy Info (EERE)

    RAPIDRoadmap7-VT-a < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower...

  13. RAPID/Roadmap/7-FD-e | Open Energy Information

    Open Energy Info (EERE)

    Help Apps Datasets Community Login | Sign Up Search Page Edit with form History RAPIDRoadmap7-FD-e < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and...

  14. RAPID/Roadmap/7-FD-g | Open Energy Information

    Open Energy Info (EERE)

    Roadmap7-FD-g < RAPID | Roadmap Jump to: navigation, search RAPID Regulatory and Permitting Information Desktop Toolkit BETA About Bulk Transmission Geothermal Hydropower Solar...

  15. Energy Department Invests Over $7 Million to Commercialize Cost...

    Broader source: Energy.gov (indexed) [DOE]

    announced more than 7 million for projects that will help bring cost-effective, advanced hydrogen and fuel cell technologies online faster. This investment-across four...

  16. Endangered Species Act Section 7 Consultation Handbook | Open...

    Open Energy Info (EERE)

    section 7 processes and providing examples of various types of consultations. Author Fish and Wildlife Service and the National Marine Fisheries Service Published Fish and...

  17. Building Green in Greensburg: 5.4.7 Arts Center

    Broader source: Energy.gov [DOE]

    This poster highlights energy efficiency, renewable energy, and sustainable features of the high-performing 5.4.7 Arts Center building in Greensburg, Kansas.

  18. EPA Region 7 Air Program Website | Open Energy Information

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for EPA Region 7 Air Program Website Citation Environmental Protection Agency....

  19. California's 7th congressional district: Energy Resources | Open...

    Open Energy Info (EERE)

    Institute Registered Energy Companies in California's 7th congressional district Bay Biodiesel LLC Cogent Energy GeothermEx Inc LC Biofuels OCR Solar Roofing Inc Optimal...

  20. Sandia Energy - Energy Department Awards $7M to Advance Hydrogen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Awards 7M to Advance Hydrogen Storage Systems Home Infrastructure Security Energy Transportation Energy CRF Facilities News News & Events Research & Capabilities...

  1. Energy Department Awards Nearly $7 Million for Research to Reduce...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chu today announced awards totaling nearly 7 million in research and development funding ... electric vehicle chargers is an important step in supporting the deployment of electric ...

  2. Data:067b4402-e7d6-412b-bea9-0def7fe7c12b | Open Energy Information

    Open Energy Info (EERE)

    fe7c12b No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1. Basic Information 2....

  3. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...,4.4,4.1,4.5,4.9,4.6,8.6,8.8,7.7,8.4,8 "Carbon dioxide",1407,1503,1570,1703,1667,1707,1761,1737,1751,1836,1804,1849,1828,1767,1824,1776,1685,1810,1845,1675,1778,1816,1715,1864,1771

  4. Table 7. Crude oil proved reserves, reserves changes, and production...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...,5,27,21,27,1,0,4,15,232 " San Joaquin Basin Onshore",1812,5,324,187,419,426,11,0,2,150,1824 " State Offshore",210,4,11,7,44,44,0,0,10,14,214 "Colorado",896,118,261,93,7,1,110,0,0,...

  5. C:\Forms\HQ F 3790.7.cdr

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 (7-82) U.S. Department of Energy TO: COPY DISTRIBUTION: 1. POSTING 2. OFFICIAL IN CHARGE 3. SAFETY INSPECTOR 4. BUILDING MANAGER 5. SUSPENSE INSPECTOR DATE LOCATION On the basis of the above stated inspection, it was found that the following unsafe or unhealthful working condition exists: FOR THIS NOTICE DESCRIPTION DATE FOR CORRECTION NOTICE OF UNSAFE OR UNHEALTHFUL WORKING CONDITIONS

  6. DOE F 1325.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE F 1325.7 Form is used to manage telecommunications messages by consolidating information on the message's classification, whether it contains weapons data, adresses, and message text. PDF icon TELECOMMUNICATION MESSAGE More Documents & Publications DOE F 1325.7A Briefing, Restricted Data Classifiers Inspection Report: DOE/IG-0904

  7. DOE F 1325.7A | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A DOE F 1325.7A Provides instructions for using the Department's Secure Automatic Communications Network (SACNET), PDF icon Telecommunication Message Data: SACNET Users Guide More Documents & Publications DOE F 1325.7 DOE F 470.10 Security Policy, CMPC Marking Resource

  8. DOE F 1500.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE F 1500.7 Form is used by employees to provide the information used in calculating the relocation income tax allowance. PDF icon Employee Relocation Income Tax (RIT) Allowance Certification More Documents & Publications DOE F 1510.9 OPM Reservist Differential Briefing DOE F 1520.1

  9. DOE F 1600.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE F 1600.7 Form is used to collect an applicant's disability status and nature of the disability and the applicatn's race and national origin. PDF icon Applicant Disability, Race/National Origin and Sex Identification More Documents & Publications Employee In-Processing Forms Ethnicity and Race Identification New Employee Orientation - Forms Checklist

  10. DOE F 2240.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    40.7 DOE F 2240.7 Form used to report the acquisition cost, accumulated depreciation, date of original purchase, and any other pertinent data related to property transfers between DOE Offices and contractors. PDF icon TRANSFER VOUCHER More Documents & Publications DOE F 2040.3 Docket No. EERE-2012-BT-TP-0046 Ex Parte Communication DOE F 5631.25

  11. DOE HQ F 3305.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    05.7 DOE HQ F 3305.7 Form used to inform SES applicants of the status of their applications. PDF icon NOTIFICATION OF SENIOR EXECUTIVE SERVICES EMPLOYMENT CONSIDERATION More Documents & Publications DOE F 3305.8 DOE F 3305.2 DOE F 3305.10

  12. DOE HQ F 3790.7 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 DOE HQ F 3790.7 Form documents inspections that find unsafe or unhealthful working conditions and provide information on location, description of the condition, and correction date. PDF icon NOTICE OF UNSAFE OR UNHEALTHFULWORKING CONDITIONS More Documents & Publications DOE HQ F 3790.8 Federal Employee Occupational Safety And Health (FEOSH) Program Overview 10 CFR 851 Construction Safety Program

  13. Module 7 - Integrated Baseline Review and Change Control | Department of

    Energy Savers [EERE]

    Energy 7 - Integrated Baseline Review and Change Control Module 7 - Integrated Baseline Review and Change Control This module focuses on integrated baseline reviews (IBR) and change control. This module outlines the objective and responsibility of an integrated baseline review. Additionally, this module will discuss the change control process required for implementing earned value

  14. Update of Acquisition Guide Chapter 7.1, Acquisition Planning

    Broader source: Energy.gov [DOE]

    A new section has been added to the Background segment of Acquisition Guide Chapter 7.1, Acquisition Planning, to emphasize the importance of collaboratively establishing acquisition lead time schedules reflecting firm commitments. A marginal line has been added to note the new material at pages 5 through 7.

  15. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...943,65166,82024,84050,84948,70444,74664 "Nitrogen oxide (short tons)" ...8,1.7,1.7,1.2,1.5,1.3,1.9,1.9,2,1.4,1.5 "Nitrogen oxide",0.3,0.3,0.2,0.3,0.4,0.4,0.4,0.4,0...

  16. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...,96891,107977,99842,102107,98541,102697 "Nitrogen oxide (short tons)" ...4.7,5.2,5.4,5.1,5.4,6.1,5.8,6.1,6.1,6.3 "Nitrogen oxide",1.6,1.9,1.9,2.2,2.4,2.4,2.6,2.7,2...

  17. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...0793,153217,148070,146967,190426,147068 "Nitrogen oxide (short tons)" ...8,12,11.6,14.5,10.5,10.3,10.2,13.8,10.9 "Nitrogen oxide",2.7,2.8,2.8,3,3.3,3.8,4.3,4.7,4.9...

  18. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...6726,6261,6579,8807,9647,9625,6626,9540 "Nitrogen oxide (short tons)" ...9,1.1,0.9,1,0.9,0.9,1.1,2,1.8,2.6,1.4,2 "Nitrogen oxide",2.7,1,0.6,0.4,0.8,0.3,0.6,0.7,0.3...

  19. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...581,67316,56272,60840,60087,65822,78727 "Nitrogen oxide (short tons)" ...8,3.1,2.5,2.5,3.8,4,3,2.3,2.5,2.8,3,3.9 "Nitrogen oxide",0.5,0.5,0.5,0.4,0.5,0.5,0.7,0.7,1...

  20. Table 7. Electric power industry emissions estimates, 1990 through...

    U.S. Energy Information Administration (EIA) Indexed Site

    ...624,46333,22809,24652,23826,52838,57853 "Nitrogen oxide (short tons)" ...,9.6,10.9,9.9,6.4,9.5,2.8,3.2,3,6.1,7.3 "Nitrogen oxide",1.3,1.4,1,1.1,1.1,1.7,1.4,1.4,1.4...