National Library of Energy BETA

Sample records for wei gai high

  1. A Fast High Utility Itemsets Mining Algorithm Ying Liu Wei-keng Liao Alok Choudhary

    E-Print Network [OSTI]

    aspects in a number of real applications, such as retail marketing, network log, etc. The differenceA Fast High Utility Itemsets Mining Algorithm Ying Liu Wei-keng Liao Alok Choudhary Electrical

  2. PIPELINED PARALLEL ARCHITECTURE FOR HIGH THROUGHPUT MAP DETECTORS Ruwan Ratnayake, Gu-Yeon Wei and Aleksandar Kavcic

    E-Print Network [OSTI]

    Kavcic, Aleksandar

    PIPELINED PARALLEL ARCHITECTURE FOR HIGH THROUGHPUT MAP DETECTORS Ruwan Ratnayake, Gu-Yeon Wei performance close to the channel capacity limits. Deep pipelined architecture for the forward only method, where as FB-BCJR only allow sequential state metric computations. Parallelism facilitates pipelining, re

  3. The Dissertation Committee for Xiuli Gai certifies that this is the approved version of the following dissertation

    E-Print Network [OSTI]

    Santos, Juan

    that this is the approved version of the following dissertation: A Coupled Geomechanics and Reservoir Flow Model on Parallel #12;A Coupled Geomechanics and Reservoir Flow Model on Parallel Computers by Xiuli Gai, B.E., M teaches me through his code and through his integrity as a computer scientist, as a chemical and petroleum

  4. Numerical Study of Flexible Flapping Wing Propulsion and Mingjun Wei

    E-Print Network [OSTI]

    Wei, Mingjun

    Numerical Study of Flexible Flapping Wing Propulsion Tao Yang and Mingjun Wei New Mexico State highly flexible flapping wings interacting with fluid flows. Here, the fluid motion, solid motion necessary flapping mechanism, control cells are implemented in solid area (i.e., the wing) as "skeleton

  5. NOTES ON CONJECTURES OF ZHI-WEI SUN Zhi-Wei Sun

    E-Print Network [OSTI]

    Sun, Zhi-Wei

    NOTES ON CONJECTURES OF ZHI-WEI SUN Zhi-Wei Sun Last update: August 30, 2009 Our notations if n1 = · · · = nk. In 2005 S. Guo showed that the conjecture is actually equivalent to a result;2 ZHI-WEI SUN Conjecture 4 [1989-05-04; Discrete Math., 1992]. Let n1, . . . , nk be positive in- tegers

  6. A New Reference Correlation for the Viscosity of Methanol Hong Wei Xiang,a...

    E-Print Network [OSTI]

    Magee, Joseph W.

    A New Reference Correlation for the Viscosity of Methanol Hong Wei Xiang,a... Arno Laesecke for the viscosity of methanol is presented that is valid over the entire fluid region, including vapor, liquid coefficient is developed from experimental data and applied to methanol. The high-density contribution

  7. LogStore: Toward Energy-Proportional Storage Servers Wei Zheng Ana Paula Centeno Frederic Chong

    E-Print Network [OSTI]

    Bianchini, Ricardo

    LogStore: Toward Energy-Proportional Storage Servers Wei Zheng Ana Paula Centeno Frederic Chong,anapaula,ricardob}@cs.rutgers.edu chong@cs.ucsb.edu ABSTRACT Storage servers consume significant amounts of energy and are highly non-energy throughput. Categories and Subject Descriptors D.4 [Operating systems]: Storage management Keywords Energy

  8. Enabling graphene nanoelectronics. Pan, Wei; Ohta, Taisuke; Biedermann...

    Office of Scientific and Technical Information (OSTI)

    Enabling graphene nanoelectronics. Pan, Wei; Ohta, Taisuke; Biedermann, Laura Butler; Gutierrez, Carlos; Nolen, C. M.; Howell, Stephen Wayne; Beechem Iii, Thomas Edwin; McCarty,...

  9. Combinatorial Number Theory in China Zhi-Wei Sun

    E-Print Network [OSTI]

    Sun, Zhi-Wei

    Combinatorial Number Theory in China Zhi-Wei Sun Nanjing University Nanjing 210093, P. R. China as number theorists. Zhi-Wei Sun's School: Study covers of the integers or groups, restricted sumsets via Combinatorial Nullstellensatz, and various combinatorial congruences. Remark. Sun and his students view

  10. NREL: Energy Sciences - Jun-Wei Luo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14RecentGeospatial Analysis To performNews BelowDanielJun-Wei

  11. Women @ Energy: Wei Xu | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Lacledeutilities.EnergyKirstin AlberiComputerMathewsWei Xu joined

  12. First-principles study of Mn-induced local magnetic moments in host semiconductors Shi-Hao Wei

    E-Print Network [OSTI]

    Gong, Xingao

    230031, China Gustavo M. Dalpian and Su-Huai Wei National Renewable Energy Laboratory, Golden, Colorado the high energy state, thus lowering the total energy. In the case where no hole is present, such as in Cd lowering the total energy.1,5 However, recent discovery that Mn-doped III-V semiconduc- tors can have

  13. Numerical Study of Flexible Flapping Wing Propulsion , Mingjun Wei

    E-Print Network [OSTI]

    Wei, Mingjun

    Numerical Study of Flexible Flapping Wing Propulsion Tao Yang , Mingjun Wei New Mexico State in 1912.4 The Knoller-Betz effect was verified experimentally in a wind tunnel by Katzmayr in 1922

  14. XUEFENG F. WEI, Ph.D. Biotechnology and Bioengineering Center

    E-Print Network [OSTI]

    M.S. Biophysics Huazhong University of Science and Technology, Wuhan, China B.S. Biomedical electrodes for neural stimulation. Journal of Biomaterials Science, Polymer Edition; 18(8):1057-73. Wei XF

  15. C:\DOCUME~1\wei\LOCALS~1\Temp\WEI13737.loc

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l DeInsulation at theEnergy StateSpecifiers | DepartmentWEI13737

  16. Smart Microgrid Demonstrator Dr. Wei-Jen Lee (wlee@uta.edu) (Funded by DOE)

    E-Print Network [OSTI]

    Texas at Arlington, University of

    Smart Microgrid Demonstrator Dr. Wei-Jen Lee (wlee@uta.edu) (Funded by DOE) EE www.uta.edu//ee info reliability and efficiency, lower cost of electric power #12;Smart Microgrid Demonstrator Dr. Wei-Jen Lee

  17. Configurable Dynamic Privacy for Pervasive Sensor Networks Nan-Wei Gong

    E-Print Network [OSTI]

    1 Configurable Dynamic Privacy for Pervasive Sensor Networks by Nan-Wei Gong Submitted Privacy for Pervasive Sensor Networks by Nan-Wei Gong Submitted to the Program in Media Arts and Sciences

  18. Computations Modulo Regular Chains Xin Li, Marc Moreno Maza and Wei Pan

    E-Print Network [OSTI]

    Moreno Maza, Marc

    Computations Modulo Regular Chains Xin Li, Marc Moreno Maza and Wei Pan (University of Western Ontario) ISSAC 2009, Seoul July 30, 2009 Xin Li, Marc Moreno Maza and Wei Pan (University of Western) = (2 x - 1) y - 7 - x. Xin Li, Marc Moreno Maza and Wei Pan (University of Western Ontario

  19. Quantile Regression for Correlated Observations , Lee-Jen Wei2

    E-Print Network [OSTI]

    Wolfe, Patrick J.

    Quantile Regression for Correlated Observations Li Chen1 , Lee-Jen Wei2 , and Michael I. Parzen 1 60637 Abstract In this paper, we consider the problem of regression analysis for data which consist the standard mean regression, we regress various percentiles of each marginal response variable over its

  20. NOTIONS OF EFFICIENCY IN SIMULATION PARADIGM TZER-JEN WEI

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    NOTIONS OF EFFICIENCY IN SIMULATION PARADIGM TZER-JEN WEI Department Of Applied Mathematics model of efficient adversary in cryptography, namely SPT (strict polyno- mial time) machines. MPT can for cryptography. However, the first question is, why even bother to consider an alternative model of efficient

  1. New Integral Distinguisher for Rijndael-256 Yuechuan Wei1

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    New Integral Distinguisher for Rijndael-256 Yuechuan Wei1 , Bing Sun2 and Chao Li1,2,3 1 School, integral attack, Rijndael-256 1 Introduction The known integral distinguishers of Rijndael-256 are based the square property which is byte-oriented[1­5, 7]. For example, the known 3-round integral distin- guisher

  2. DC Optimal Power Flow: Uniqueness and Chee Wei Tan

    E-Print Network [OSTI]

    Tan, Chee Wei

    the minimization of power transmission loss in DC-OPF and char- acterize the uniqueness of its solutions. This hasDC Optimal Power Flow: Uniqueness and Algorithms Chee Wei TanÝ , Desmond W. H. Cai£ and Xin LouÝ Ý and transmission loss in a power net- work subject to physical constraints governed by Kirchhoff's and Ohm's law [1

  3. Proportional Hazards Regression with Unknown Link Function By WEI WANG

    E-Print Network [OSTI]

    Wang, Jane-Ling

    Proportional Hazards Regression with Unknown Link Function By WEI WANG Harvard Medical School@amss.ac.cn The University of Hong Kong, Hong Kong qhwang@hku.hk Summary Proportional hazards regression model assumes of the covariates. Traditional ap- proaches, such as the Cox proportional hazards model, focus on estimating

  4. Investigation of Microscale Damage Evolution in High-Strength...

    Office of Scientific and Technical Information (OSTI)

    Alloy. Citation Details In-Document Search Title: Investigation of Microscale Damage Evolution in High-Strength Al Alloy. Authors: Jin, Huiqing ; Lu, Wei-Yang ; Mota, Alejandro ;...

  5. Investigation of Microscale Damage Evolution in High Strength...

    Office of Scientific and Technical Information (OSTI)

    Alloy. Citation Details In-Document Search Title: Investigation of Microscale Damage Evolution in High Strength A1 Alloy. Authors: Jin, Huiqing ; Lu, Wei-Yang ; Mota, Alejandro ;...

  6. Take This Personally: Pollution Attacks on Personalized Services Xinyu Xing, Wei Meng, Dan Doozan, Alex C. Snoeren, Nick Feamster, and Wenke Lee

    E-Print Network [OSTI]

    Snoeren, Alex

    Take This Personally: Pollution Attacks on Personalized Services Xinyu Xing, Wei Meng, Dan Doozan against three popular Web services, we high- light a new class of vulnerability that allows an attacker a pollution attack, that allows third parties to alter the customized content the services return to users who

  7. Fluorinated Imidazoles as Proton Carriers for Water-Free Fuel Cell Wei-Qiao Deng, Valeria Molinero, and William A. Goddard III*

    E-Print Network [OSTI]

    Goddard III, William A.

    Fluorinated Imidazoles as Proton Carriers for Water-Free Fuel Cell Membranes Wei-Qiao Deng, Valeria intensified the research on proton-exchange membrane fuel cells (PEMFC) in the past decade. The high a principal goal of fuel cell research. Alternative water- free materials, such as organic-inorganic composite

  8. Proceedings of the 2012 Industrial and Systems Engineering Research Conference X. Wei and A. Kusiak

    E-Print Network [OSTI]

    Kusiak, Andrew

    Optimization of Biogas Production Process in a Wastewater Treatment Plant Xiupeng Wei, Andrew Kusiak Department-wei@uiowa.edu Abstract Sludge is a byproduct of wastewater processing suitable for biogas production. The biogas for optimization of biogas production process in a wastewater treatment plant is presented. The process model

  9. Women @ Energy: Wei Xu | Department of Energy

    Office of Environmental Management (EM)

    include medical imaging, tomography, visualization, visual analytics, high performance computing with GPGPUs and multi-core clusters, imaging processing, machine learning...

  10. Mesoscale Modeling of a Li-Ion Polymer Cell Chia-Wei Wanga,

    E-Print Network [OSTI]

    Sastry, Ann Marie

    Mesoscale Modeling of a Li-Ion Polymer Cell Chia-Wei Wanga, * and Ann Marie Sastrya,b,c, *,z, the study reported critical data required for mesoscale numerical simulation, including ionic con- ductivity

  11. Dynamics of the self-assembly of nanovoids and nanobubbles Hui-Chia Yu, Wei Lu *

    E-Print Network [OSTI]

    Lu, Wei

    Dynamics of the self-assembly of nanovoids and nanobubbles in solids Hui-Chia Yu, Wei Lu.actamat-journals.com #12;from many early formed small ``seed'' regions to other regions. There exists a threshold value

  12. Prospects of graphene electrodes in photovoltaics Yasin Khatami, Wei Liu, Jiahao Kang, and Kaustav Banerjee*

    E-Print Network [OSTI]

    Prospects of graphene electrodes in photovoltaics Yasin Khatami, Wei Liu, Jiahao Kang, and Kaustav, the prospects of graphene for transparent conductors in photovoltaics are discussed. The recent advancements in a controllable manner. Keywords: Graphene, photovoltaics, transparent conductor 1. INTRODUCTION Transparent

  13. Inferring Better Contracts Yi Wei Carlo A. Furia Nikolay Kazmin Bertrand Meyer

    E-Print Network [OSTI]

    Meyer, Bertrand

    but conservative contracts, and are mostly successful with small programs. Dynamic approaches scale betterInferring Better Contracts Yi Wei Carlo A. Furia Nikolay Kazmin Bertrand Meyer Chair of Software available to en- hance program reliability: equipping programs with exten- sive contracts. The results

  14. Voxels on Fire Ye Zhao Xiaoming Wei Zhe Fan Arie Kaufman Hong Qin

    E-Print Network [OSTI]

    Qin, Hong

    Voxels on Fire Ye Zhao Xiaoming Wei Zhe Fan Arie Kaufman Hong Qin Center for Visual Computing a method for the animation of fire propagation and the burning consumption of objects represented as volumetric data sets. Our method uses a volumetric fire propagation model based on an enhanced distance field

  15. Evaluation of production losses from unconventional shale reservoirs Umut Aybar, Wei Yu, Mohammad O. Eshkalak*

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    Evaluation of production losses from unconventional shale reservoirs Umut Aybar, Wei Yu, Mohammad O in revised form 25 February 2015 Accepted 26 February 2015 Available online Keywords: Unconventional shale that the geomechanical effects cause a significant production loss. Underground shale formations are scattered all over

  16. Classifying Facial Gestures in Presence of Head Motion Wei-Kai Liao and Isaac Cohen

    E-Print Network [OSTI]

    Southern California, University of

    expressions of a moving head. We present a systematic framework to analyze and classify the facial gestures. After estimating the head pose, the human face is modeled by a collection of face's regionsClassifying Facial Gestures in Presence of Head Motion Wei-Kai Liao and Isaac Cohen Institute

  17. Theory of Transport of Long Polymer Molecules through Carbon Nanotube Channels Chenyu Wei* and Deepak Srivastava

    E-Print Network [OSTI]

    Wei, Chenyu

    Theory of Transport of Long Polymer Molecules through Carbon Nanotube Channels Chenyu Wei May 2003; published 5 December 2003) A theory of transport of long chain polymer molecules through carbon nanotube (CNT) channels is developed using the Fokker-Planck equation and direct molecular

  18. Experiments on humans Tomasz Ciesielski, Line-Kristin Larsen, Claudia Melis, Chia-Wei Vivian Wang

    E-Print Network [OSTI]

    Bech, Claus

    Experiments on humans Tomasz Ciesielski, Line-Kristin Larsen, Claudia Melis, Chia-Wei Vivian Wang #12;Experiments on humans - Foersøkdyrelære ­ NTNU, November 2006 Page 1 of 21 Index 1. Historical issues and present status page 14 5. Behavioural research on humans page 15 5.1 The Milgram experiment

  19. Around Montgomery's trick: A taste of a bit hack Marc Moreno Maza (after Wei Pan's notes)

    E-Print Network [OSTI]

    Moreno Maza, Marc

    Around Montgomery's trick: A taste of a bit hack Marc Moreno Maza (after Wei Pan's notes of a bit hack #12;Introduction Let a, b, p be number-like objects (integer numbers, univariate polynomials over a field) and such that p {-1, 0, 1}. Around Montgomery's trick: A taste of a bit hack #12

  20. A Walk-Through Programmed Robot for Welding in Shipyards Marcelo H. Ang Jr.*, Wei Lin#

    E-Print Network [OSTI]

    Ang Jr.,, Marcelo H.

    1 A Walk-Through Programmed Robot for Welding in Shipyards Marcelo H. Ang Jr.*, Wei Lin# and Ser: · Walk-through programming · Robotic welding · Automation in shipyards · Dynamic control Industrial Robot, Vol. 26, No. 5, 1999, pp. 377-388. #12;1 A Walk-Through Programmed Robot for Welding in Shipyards

  1. INTERFERENCE ALIGNMENT USING REWEIGHTED NUCLEAR NORM MINIMIZATION Gokul Sridharan and Wei Yu

    E-Print Network [OSTI]

    Yu, Wei

    INTERFERENCE ALIGNMENT USING REWEIGHTED NUCLEAR NORM MINIMIZATION Gokul Sridharan and Wei Yu Edward by the nuclear norm. We further propose the use of an iterative reweighted nuclear norm approach and show, nuclear norm minimization, reweighting. 1. INTRODUCTION Since the landmark development of interference

  2. Top-k Set Similarity Joins Chuan Xiao Wei Wang Xuemin Lin Haichuan Shang

    E-Print Network [OSTI]

    Lin, Xuemin

    Top-k Set Similarity Joins Chuan Xiao Wei Wang Xuemin Lin Haichuan Shang The University of New threshold. In this paper, we study a variant of the similarity join, termed top-k set similarity join. It returns the top-k pairs of records ranked by their similarities, thus eliminating the guess work users

  3. Help Your Mobile Applications with Fog Mohammed A. Hassan, Mengbai Xiao, Qi Wei and Songqing Chen

    E-Print Network [OSTI]

    Chen, Songqing

    Help Your Mobile Applications with Fog Computing Mohammed A. Hassan, Mengbai Xiao, Qi Wei by fog computing to help mobile applications. Preliminary experiments conducted based on implemented prototypes show that fog computing can provide an effective and sometimes better alternative to help mobile

  4. Pyrolysis approach to the synthesis of gallium nitride nanorods Wei-Qiang Han and Alex Zettla)

    E-Print Network [OSTI]

    Zettl, Alex

    Pyrolysis approach to the synthesis of gallium nitride nanorods Wei-Qiang Han and Alex Zettla for publication 26 October 2001 Herein we describe a pyrolysis route to the synthesis of gallium nitride GaN nanorods. GaN nanorods have been grown by the pyrolysis of gallium dimethylamide and ferrocene under

  5. JOINT OPTIMIZATION OF SOURCE CODING AND POWER ALLOCATION IN SENSOR Jun Yuan and Wei Yu

    E-Print Network [OSTI]

    Yu, Wei

    JOINT OPTIMIZATION OF SOURCE CODING AND POWER ALLOCATION IN SENSOR NETWORKS Jun Yuan and Wei Yu and correlated, the network performance becomes a complicated and non-separable function of all individual data allocation in a sensor network. We model the sensor network from an information theoretical perspective

  6. TAMPERING IDENTIFICATION USING EMPIRICAL FREQUENCY RESPONSE Wei-Hong Chuang, Ashwin Swaminathan, and Min Wu

    E-Print Network [OSTI]

    Wu, Min

    TAMPERING IDENTIFICATION USING EMPIRICAL FREQUENCY RESPONSE Wei-Hong Chuang, Ashwin Swaminathan that not only detect the presence of tampering but also identify its type. This paper focusses on tampering this problem. We show that several types of tampering oper- ations, both linear shift invariant (LSI) and non

  7. Energy performance of a dual airflow window under different climates Jingshu Wei1

    E-Print Network [OSTI]

    Chen, Qingyan "Yan"

    -e windows was also calculated for com parison. The dual airflow window can reduce heating energy1 Energy performance of a dual airflow window under different climates Jingshu Wei1 , Jianing Zhao1. This paper reports our effort to use EnergyPlus to simulate the energy performance of a dual airflow window

  8. PICS: A Public IaaS Cloud Simulator In Kee Kim, Wei Wang, and Marty Humphrey

    E-Print Network [OSTI]

    Weimer, Westley

    PICS: A Public IaaS Cloud Simulator In Kee Kim, Wei Wang, and Marty Humphrey Department of Computer, we created a Public Cloud IaaS Simulator (PICS). PICS enables the cloud user to evaluate the cost, job scheduling, and diverse workload patterns. We extensively vali- dated PICS by comparing its

  9. Identifying Optimal Inorganic Nanomaterials for Hybrid Solar Cells Hongjun Xiang* and Su-Huai Wei

    E-Print Network [OSTI]

    Gong, Xingao

    developed photovoltaic technology, organic-inorganic hybrid solar cells have attracted great interest 3.5% so far. As an alternative polymer-based photovoltaic cell, the organic-inorganic hybrid solarIdentifying Optimal Inorganic Nanomaterials for Hybrid Solar Cells Hongjun Xiang* and Su-Huai Wei

  10. Identity-Based Cryptography for Grid Security Hoon Wei Lim and Kenneth G. Paterson

    E-Print Network [OSTI]

    Paterson, Kenny

    Identity-Based Cryptography for Grid Security Hoon Wei Lim and Kenneth G. Paterson Information.paterson}@rhul.ac.uk Abstract The majority of current security architectures for grid systems use public key infrastructure (PKI) to authenticate identities of grid members and to secure resource alloca- tion to these members. Identity

  11. Permission Evolution in the Android Ecosystem Xuetao Wei, Lorenzo Gomez, Iulian Neamtiu, Michalis Faloutsos

    E-Print Network [OSTI]

    Chrobak, Marek

    Permission Evolution in the Android Ecosystem Xuetao Wei, Lorenzo Gomez, Iulian Neamtiu, Michalis, neamtiu, michalis}@cs.ucr.edu ABSTRACT Android uses a system of permissions to control how apps access sensitive devices and data stores. Unfortunately, we have little understanding of the evolution of Android

  12. Cost-Effective Soft Error Protection For Register Files Pablo Montesinos, Wei Liu* and Josep Torrellas

    E-Print Network [OSTI]

    Torrellas, Josep

    Shield: Cost-Effective Soft Error Protection For Register Files Pablo Montesinos, Wei Liu renamed P10 is considered short P10 is considered long Ponomarev et al, 2004 Short version: a new Montesinos. University of Illinois at Urbana-Champaign ECCTable entry allocation Entries are allocated when

  13. Web-Based Interactive Visualization of Data Cubes Xusheng Wang Ping Chen Wei Ding

    E-Print Network [OSTI]

    Ding, Wei

    Web-Based Interactive Visualization of Data Cubes Xusheng Wang Ping Chen Wei Ding Department graphics can help improving this process. Recently, we developed a Web-based interactive data cube Cube, Information Visualization, Web-based Graphics 1. Introduction Data cube is an aggregation

  14. Approaches to Establishing Multicast Overlays Yan Zhu, Wei Shu The University of New Mexico

    E-Print Network [OSTI]

    Approaches to Establishing Multicast Overlays Yan Zhu, Wei Shu The University of New Mexico Min of an Internet-scale mul- ticast with the use of application-level routing components has generated a lots and be willing to share resource with others. Min-You Wu is currently on leave from The University of New Mexico

  15. Trustworthy Service Selection and Composition CHUNG-WEI HANG and MUNINDAR P. SINGH

    E-Print Network [OSTI]

    Trustworthy Service Selection and Composition CHUNG-WEI HANG and MUNINDAR P. SINGH North Carolina modeling, service-oriented computing 1. INTRODUCTION In service-oriented computing (SOC) [Singh and Huhns. chungwei.hang@gmail.com, singh@ncsu.edu A preliminary version of this manuscript, "Selecting trustworthy

  16. Interactive Offline Tracking for Color Objects Yichen Wei Jian Sun Xiaoou Tang Heung-Yeung Shum

    E-Print Network [OSTI]

    Borgs, Christian

    Interactive Offline Tracking for Color Objects Yichen Wei Jian Sun Xiaoou Tang Heung-Yeung Shum, we present an interactive offline tracking system for generic color objects. The system achieves 60- 100 fps on a 320 × 240 video. The user can therefore easily refine the tracking result

  17. A Comprehensive Ontology for Knowledge Representation in the Internet of Things Wei Wang, Suparna De

    E-Print Network [OSTI]

    Wei, Wang

    A Comprehensive Ontology for Knowledge Representation in the Internet of Things Wei Wang, Suparna-mail: {K.Moessner}@surrey.ac.uk Abstract--Semantic modeling for the Internet of Things has become of a comprehensive description ontology for knowledge representation in the domain of Internet of Things and discuss

  18. Derived equivalences for -Auslander-Yoneda algebras Wei Hu, Changchang Xi

    E-Print Network [OSTI]

    Xi, Changchang

    Derived equivalences for -Auslander-Yoneda algebras Wei Hu, Changchang Xi School of Mathematical derived equivalences between these -Auslander-Yoneda algebras (not necessarily Artin algebras), or their quotient algebras, from a given almost -stable derived equivalence. As consequences of our method, we have

  19. Graphene Edge Lithography Guibai Xie, Zhiwen Shi, Rong Yang, Donghua Liu, Wei Yang, Meng Cheng, Duoming Wang, Dongxia Shi,

    E-Print Network [OSTI]

    Zhang, Guangyu

    Graphene Edge Lithography Guibai Xie, Zhiwen Shi, Rong Yang, Donghua Liu, Wei Yang, Meng Cheng: Fabrication of graphene nanostructures is of importance for both investigating their intrinsic physical approach for graphene nanostructures. Compared with conventional lithographic fabrication techniques

  20. Defining Strong Privacy for RFID and Stephen A. Weis2

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    , logistics, and supply chain management. As such, they are of great interest to enterprises intensively, munitions, automobile parts, or even live cattle. The high value of such objects justifies relatively. Tight economic considerations sug- gest that this will remain the case for the foreseeable future. Next-generation

  1. On Distributed Control of Voltage Source Inverters in Island AC Chin-Yao Chang and Wei Zhang

    E-Print Network [OSTI]

    Zhang, Wei

    -interfaced distributed energy resources (DERs) in island microgrids. We show that under bounded load uncertainties or taken intentionally for efficiency or reliability benefits, see [1]. Distributed energy resources (DERsOn Distributed Control of Voltage Source Inverters in Island AC Microgrids Chin-Yao Chang and Wei

  2. Web-based Dynamic Delphi: a New Survey Instrument JingTao Yao Wei-Ning Liu

    E-Print Network [OSTI]

    Yao, JingTao

    Web-based Dynamic Delphi: a New Survey Instrument JingTao Yao Wei-Ning Liu Department of Computer of the conventional Delphi method and the dynamic Delphi instrument is conducted. It is suggested that a dynamic leaking issues. 1. INTRODUCTION The Delphi survey instrument is a way of collecting expert ideas

  3. CLF-based Tracking Control for UAV Kinematic Models with Saturation Constraints Wei Ren Randal W. Beard

    E-Print Network [OSTI]

    Ren, Wei

    CLF-based Tracking Control for UAV Kinematic Models with Saturation Constraints Wei Ren Randal W Abstract-- This paper considers the trajectory tracking prob- lem for unmanned air vehicles (UAVs). We assume that the UAV is equipped with an autopilot which reduces the twelve degree-of-freedom (DOF) model

  4. Globalization, industrial restructuring, and regional development in China Y.H. Dennis Wei a,*, Ingo Liefner b

    E-Print Network [OSTI]

    Wei, Yehua Dennis

    Globalization, industrial restructuring, and regional development in China Y.H. Dennis Wei a: Globalization Institutions Industrialization Regional development China a b s t r a c t China's rapid growth. Through a comprehensive review of the literature on globalization, industrial restructuring and regional

  5. Database-Assisted Low-Dose CT Image Restoration Wei Xu, Sungsoo Ha and Klaus Mueller, Senior Member, IEEE

    E-Print Network [OSTI]

    Database-Assisted Low-Dose CT Image Restoration Wei Xu, Sungsoo Ha and Klaus Mueller, Senior Member, IEEE Abstract­ The image quality of low-dose CT scans typically suffers greatly from the limited utilization of X-ray radiation. Although the harmful effects to patient health are reduced, the low quality

  6. Decentralized Control of Aggregated Loads for Demand Response Di Guo, Wei Zhang, Gangfeng Yan, Zhiyun Lin, and Minyue Fu

    E-Print Network [OSTI]

    Zhang, Wei

    Decentralized Control of Aggregated Loads for Demand Response Di Guo, Wei Zhang, Gangfeng Yan of residential responsive loads for vari- ous demand response applications. We propose a general hybrid system and effectively reduce the peak power consumption. I. INTRODUCTION Demand response has the potential to shift

  7. ME346A Introduction to Statistical Mechanics Wei Cai Stanford University Win 2011 Handout 11. Applications to Fluids

    E-Print Network [OSTI]

    Cai, Wei

    ME346A Introduction to Statistical Mechanics ­ Wei Cai ­ Stanford University ­ Win 2011 Handout 11. Applications to Fluids February 23, 2011 Contents 1 Ideal gas model review 1 2 Van der Waals model 2 3 Virial In this lecture, we will discuss fluids beyond the ideal gas limit. This means we need to account for interactions

  8. X-ray diffraction studies and equation of state of methane at 202 GPa Liling Sun a,*, Wei Yi a

    E-Print Network [OSTI]

    Shen, Guoyin

    X-ray diffraction studies and equation of state of methane at 202 GPa Liling Sun a,*, Wei Yi that at room temperature compressed CH4 remains an insulator with cubic structure to 202 GPa. Ó 2009 Elsevier B of planetary interiors and the origin of their magnetic field distribution. CH4 has a very rich phase diagram

  9. DMQL: A Data Mining Query Language for Relational Databases Jiawei Han Yongjian Fu Wei Wang Krzysztof Koperski Osmar Zaiane

    E-Print Network [OSTI]

    Zaiane, Osmar R.

    DMQL: A Data Mining Query Language for Relational Databases Jiawei Han Yongjian Fu Wei Wang@cs.sfu.ca Abstract The emerging data mining tools and systems lead naturally to the demand of a powerful data mining. This motivates us to design a data mining query language, DMQL, for mining di erent kinds of knowledge

  10. DMQL: A Data Mining Query Language for Relational Databases \\Lambda Jiawei Han Yongjian Fu Wei Wang Krzysztof Koperski Osmar Zaiane

    E-Print Network [OSTI]

    Fu, Yongjian

    DMQL: A Data Mining Query Language for Relational Databases \\Lambda Jiawei Han Yongjian Fu Wei Wang@cs.sfu.ca Abstract The emerging data mining tools and systems lead naturally to the demand of a powerful data mining. This motivates us to design a data mining query language, DMQL, for mining different kinds of knowledge

  11. Temperature-to-Power Mapping Zhenyu Qi, Brett H. Meyer, Wei Huang, Robert J. Ribando, Kevin Skadron, Mircea R. Stan

    E-Print Network [OSTI]

    Huang, Wei

    -SILICON POWER MAPS The "power wall" has become a critical performance lim- iter for integrated circuit designTemperature-to-Power Mapping Zhenyu Qi, Brett H. Meyer, Wei Huang§, Robert J. Ribando, Kevin, bhm, rjr, ks7h, mircea}@virginia.edu , §huangwe@us.ibm.com Abstract-- Accurate power maps are useful

  12. Synchronization of Multiple Levels of Data Fusion in Wireless Sensor Networks Wei Yuan, Srikanth V. Krishnamurthy, and Satish K. Tripathi

    E-Print Network [OSTI]

    Krishnamurthy, Srikanth

    to the severe energy constraints, sensor networks normally employ in-network data fusion [3][4]; the power1 Synchronization of Multiple Levels of Data Fusion in Wireless Sensor Networks Wei Yuan, Srikanth of California, Riverside, Riverside, CA, 92521 Abstract--In wireless sensor networks, in-network data fusion

  13. Design and Implementation of a 9-Axis Inertial Measurement Unit Pei-Chun Lin and Chi-Wei Ho

    E-Print Network [OSTI]

    Lin, Pei-Chun

    Design and Implementation of a 9-Axis Inertial Measurement Unit Pei-Chun Lin and Chi-Wei Ho Abstract-- We report on a 9-axis inertial measurement unit (IMU) which utilizes 3-axis angular velocity of states. A traditional inertial measurement unit (IMU) is comprised of 3-axis acceleration measurement

  14. 1-Jin-Wei Liang and B. F. Feeny, April 2005 TITLE: BALANCING ENERGY TO ESTIMATE DAMPING PARAMETERS IN FORCED

    E-Print Network [OSTI]

    Feeny, Brian

    ., East Lansing, MI 48824, USA. feeny@egr.msu.edu ABSTRACT This study makes use of an energy balance1- Jin-Wei Liang and B. F. Feeny, April 2005 TITLE: BALANCING ENERGY TO ESTIMATE DAMPING PARAMETERS to identify damping parameters in mechanical vibration systems. By balancing the energy input as registered

  15. An Electrochemical Color-Switchable RGB Dye: Tristable [2]Catenane Wei-Qiao Deng, Amar H. Flood, J. Fraser Stoddart, and William A. Goddard III*,

    E-Print Network [OSTI]

    Goddard III, William A.

    An Electrochemical Color-Switchable RGB Dye: Tristable [2]Catenane Wei-Qiao Deng, Amar H. Flood, J dramatically the complexity and, hence, the cost. (2) Molecular compounds are easily embedded in polymer

  16. Shifted Tietz-Wei oscillator for simulating the atomic interaction in diatomic molecules

    E-Print Network [OSTI]

    Babatunde J. Falaye; Sameer M. Ikhdair; Majid Hamzavi

    2015-04-21

    The shifted Tietz-Wei (sTW) oscillator is as good as traditional Morse potential in simulating the atomic interaction in diatomic molecules. By using the Pekeris-type approximation to deal with the centrifugal term, we obtain the bound-state solutions of the radial Schr\\"odinger equation with this typical molecular model via the exact quantization rule (EQR). The energy spectrum for a set of diatomic molecules ($NO \\left(a^4\\Pi_i\\right)$, $NO \\left(B^2\\Pi_r\\right)$, $NO \\left(L'^2\\phi\\right)$, $NO \\left(b^4\\Sigma^{-}\\right)$, $ICl\\left(X^1\\Sigma_g^{+}\\right)$, $ICl\\left(A^3\\Pi_1\\right)$ and $ICl\\left(A'^3\\Pi_2\\right)$ for arbitrary values of $n$ and $\\ell$ quantum numbers are obtained. For the sake of completeness, we study the corresponding wavefunctions using the formula method.

  17. High-Field DNP and ENDOR with a Novel Multiple-Frequency Resonance Structure

    E-Print Network [OSTI]

    Griffin, Robert G.

    High-Field DNP and ENDOR with a Novel Multiple-Frequency Resonance Structure V. Weis, M. Bennati, M­14). Experimental limitations for the implementation of pulse techniques derive from the paucity of high-frequency to radiation losses of the open structure (20). An application of this particular design at high W frequencies

  18. Eigensolution techniques, their applications and the Fisher's information entropy of Tietz-Wei diatomic molecular model

    E-Print Network [OSTI]

    B. J. Falaye; K. J. Oyewumi; S. M. Ikhdair; M. Hamzavi

    2014-10-28

    In this study, approximate analytical solution of Schr\\"odinger, Klein-Gordon and Dirac equations under the Tietz-Wei (TW) diatomic molecular potential are represented by using an approximation for the centrifugal term. We have applied three types of eigensolution techniques; the functional analysis approach (FAA), supersymmetry quantum mechanics (SUSYQM) and asymptotic iteration method (AIM) to solve Klein-Gordon Dirac and Schr\\"odinger equations, respectively. The energy eigenvalues and the corresponding eigenfunctions for these three wave equations are obtained and some numerical results and figures are reported. It has been shown that these techniques yielded exactly same results. some expectation values of the TW diatomic molecular potential within the framework of the Hellmann-Feynman theorem (HFT) have been presented. The probability distributions which characterize the quantum-mechanical states of TW diatomic molecular potential are analysed by means of complementary information measures of a probability distribution called the Fishers information entropy. This distribution has been described in terms of Jacobi polynomials, whose characteristics are controlled by the quantum numbers.

  19. Tenfold reduction of Brownian noise in high-reflectivity optical coatings

    E-Print Network [OSTI]

    Jin, Deborah

    Tenfold reduction of Brownian noise in high-reflectivity optical coatings Garrett D. Cole1,2 *, Wei and sensitivity are dictated by the excess mechanical damping of the high-reflectivity coatings that comprise at best been reduced by a factor of two. Here, we demonstrate a new paradigm in optical coating technology

  20. Dimensional scaling treatment of stability of simple diatomic molecules induced by superintense, high-frequency laser fields

    E-Print Network [OSTI]

    Kais, Sabre

    , high-frequency laser fields Qi Wei,1 Sabre Kais,1,a and Dudley Herschbach2 1 Department of Chemistry 2008; published online 3 December 2008 We present results obtained using dimensional scaling with high-frequency as the radiation intensity increases.8 In the high-frequency regime, the time-dependent Schroedinger equation

  1. The WEI6K, a 6-kW 7-m Small Wind Turbine: Final Technical Report

    SciTech Connect (OSTI)

    Wetzel, Kyle K.; McCleer, Patrick J.; Hahlbeck, Edwin C.; DOE Project Office - Keith Bennett

    2006-07-21

    This project was selected by the U.S. Department of Energy under a DOE solicitation “Low Wind Speed Technology for Small Turbine Development.” The objective of this project has been to design a new small wind turbine with improved cost, reliability and performance in grid-connected residential and small business applications, in order to achieve the overall DOE goal of cost effectiveness in Class 3 wind resources that can now be achieved in Class 5 resources. The scope of work for this project has been to complete the preliminary design of an improved small wind turbine, including preliminary loads and strength analyses; analysis and design of all major components; systems integration and structural dynamic analysis; estimation of life-cycle cost of energy; and design documentation and review. The project did not entail hardware fabrication or testing. The WEI6K Turbine resulting from this project is an upwind horizontal-axis wind turbine rated at 6 kW. It features a 3-blade 7-m diameter rotor. The generator is a direct-drive permanent magnet synchronous machine generating 3-phase power at 240 VAC. The turbine is maintained oriented in to the wind via active yaw control using electromechanical servos. Power is regulated with active blade pitch control. The turbine is presently designed to be placed on a 100-foot (30m) tower. The turbine is predicted to generate electricity at a levelized cost of energy (COE) between 7.3 and 8.9 ¢/kWh at an IEC Class II site, with an average wind speed of 8.5 m/s at hub height, depending upon whether the customer uses a guyed truss tower (the lower figure) or a monopole tower. For the NREL Reference Site, with a mean wind speed of 5.35 m/s at 10 m height, the turbine would generate at a levelized cost of energy of between 9.7 and 11.9 ¢/kWh. The lowest of these numbers is presently competitive with retail electricity rates in most of the country. The 8.9 ¢/kWh is still competitive with retail rates in many regions of the country with high electricity costs. The study further concludes that several design changes could shave 10-14% from the cost of energy determined in the preliminary design. These changes include a new tower design that offers tilt-up capability without guy wires and takes better advantage of the lowered loads produced by pitch control; design a family of airfoils more appropriate for pitch regulation on a turbine of this size; tune the pitch controller properly to minimize shedding of power during turbulent operation in the transition from Region 2 to 3; value engineer the pitch system to shave costs, including consideration of a collective pitch system; and refine the design of the hub and main frame castings to minimize weight and cost. We are generally encouraged by the results. These preliminary numbers show that we can produce a turbine that is competitive with retail electric rates at relatively windy IEC Class II sites. With further improvements in the design, we believe the turbine could be competitive at sites with lesser wind resource.

  2. ReaxFFMgH Reactive Force Field for Magnesium Hydride Systems Sam Cheung, Wei-Qiao Deng, Adri C. T. van Duin, and William A. Goddard III*

    E-Print Network [OSTI]

    van Duin, Adri

    ReaxFFMgH Reactive Force Field for Magnesium Hydride Systems Sam Cheung, Wei-Qiao Deng, Adri C. T and Chemical Engineering, California Institute of Technology, Pasadena, California 91125 ReceiVed: September 3FFMgH) for magnesium and magnesium hydride systems. The parameters for this force field were derived from fitting

  3. Large-Scale Longitudinal Analysis of SOAP-Based and RESTful Web Services Wei Jiang1,2, Dongwon Lee3, Songlin Hu1

    E-Print Network [OSTI]

    Lee, Dongwon

    Large-Scale Longitudinal Analysis of SOAP-Based and RESTful Web Services Wei Jiang1,2, Dongwon Lee3,husonglin}@ict.ac.cn, dongwon@psu.edu Abstract--While the usage of web services has increased explosively in recent years, very few studies examined the characteristics of web services using large-scale real data for a long period

  4. Engineering quantum pure states of a trapped cold ion beyond the Lamb-Dicke limit L. F. Wei,1,2

    E-Print Network [OSTI]

    Nori, Franco

    dimension of the motion of the ground state of the trapped ion should be much smaller than the effectiveEngineering quantum pure states of a trapped cold ion beyond the Lamb-Dicke limit L. F. Wei,1,2 Yu(s): 42.50.Dv, 42.50.Vk I. INTRODUCTION The engineering of quantum states has attracted consider- able

  5. Structural and electronic properties of Al7In (n = 1,2,3) Shi-Hao Wei, Li Huang, M. Ji, X.G. Gong *

    E-Print Network [OSTI]

    Gong, Xingao

    Structural and electronic properties of Al7In (n = 1,2,3) Shi-Hao Wei, Li Huang, M. Ji, X.G. Gong.cplett.2005.11.125 * Corresponding author. E-mail address: xggong@fudan.edu.cn (X.G. Gong). www

  6. First Principle Study of Ethanol Adsorption and Formation of Hydrogen Bond on Rh(111) Ming-Mei Yang,, Xin-He Bao,*, and Wei-Xue Li*,,

    E-Print Network [OSTI]

    Li, Weixue

    -Mei Yang,, Xin-He Bao,*, and Wei-Xue Li*,,§ State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China, Center for Theoretical and Computational Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China

  7. Energy and Enthalpy Distribution Functions for a Few Physical Systems K. L. Wu, J. H. Wei, S. K. Lai,*, and Y. Okabe

    E-Print Network [OSTI]

    Energy and Enthalpy Distribution Functions for a Few Physical Systems K. L. Wu, J. H. Wei, S. K is devoted to extracting the energy or enthalpy distribution function of a physical system from the moments(E) is the normalized energy probability distribution function. It can be shown that P(E) displays a Gaussian form

  8. Milligram-Scale High-Voltage Power Electronics for Piezoelectric Microrobots

    E-Print Network [OSTI]

    Wood, Robert

    of piezoelectric actuators in microrobotic applications, and demonstrating experimental realizations of sub-100mgMilligram-Scale High-Voltage Power Electronics for Piezoelectric Microrobots Michael Karpelson, Student Member, IEEE, Gu-Yeon Wei, Member, IEEE, Robert J. Wood, Member, IEEE Abstract-- Piezoelectric

  9. Copyright by Xiuli Gai 2004 - Department of Mathematics, Purdue ...

    E-Print Network [OSTI]

    2004-11-16

    single phase and the multiphase (water, oil and gas) flow equations in de- ... paction model to study sea floor subsidence in the Ekofisk oil field. Sulak et al.

  10. Microsoft PowerPoint - Nanoscale_Gai_2013.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on darkMicroorganismsnow widelySmall Iceat NERSCOnline2015workoxygen

  11. A 1.6Gbps Digital Clock and Data Recovery Circuit Pavan Kumar Hanumolu, Min Gyu Kim, Gu-Yeon Wei1, and Un-ku Moon

    E-Print Network [OSTI]

    Moon, Un-Ku

    . (1) to transform the analog loop filter to a digital loop filter (DLF) as follows: icpR + icp Cs icp Fig. 2. A digital CDR obtained by s-to-z transformation. by KP and KI and are equal to icpR and icpA 1.6Gbps Digital Clock and Data Recovery Circuit Pavan Kumar Hanumolu, Min Gyu Kim, Gu-Yeon Wei1

  12. Please cite this article in press as: M. Karpelson, et al., Driving high voltage piezoelectric actuators in microrobotic applications, Sens. Actuators A: Phys. (2012), doi:10.1016/j.sna.2011.11.035

    E-Print Network [OSTI]

    Wood, Robert

    2012-01-01

    .elsevier.com/locate/sna Driving high voltage piezoelectric actuators in microrobotic applications Michael Karpelson , Gu-Yeon WeiPlease cite this article in press as: M. Karpelson, et al., Driving high voltage piezoelectric actuators in microrobotic applications, Sens. Actuators A: Phys. (2012), doi:10.1016/j.sna.2011

  13. Highly Ordered Ga Nanodroplets on a GaAs Surface Formed by a Focused Ion Beam Qiangmin Wei,1

    E-Print Network [OSTI]

    Lu, Wei

    quantum dots by low-energy ion sputtering on a surface has been reported in several semiconductor sys quantum dots on the surface. The mechanism involves the balance between roughening and smoothing actions], Ge [10], as well as a variety of III­V compounds (GaSb [11], InP [12], and InSb [13]) can form

  14. Cooperative Trajectory-based Map Construction Wei Chang, Jie Wu, and Chiu C. Tan

    E-Print Network [OSTI]

    Wu, Jie

    . The proposed algorithm improves the bandwidth and energy efficiency of cooperative map construction or in tight urban spaces, high energy consumption [5], [8], a lot of sampling data for constructing a map

  15. Development of new tools and applications for high-throughput sequencing of microbiomes in environmental or clinical samples

    E-Print Network [OSTI]

    Blackburn, Matthew Christopher

    2010-01-01

    Novel sequencing technologies are rapidly advancing studies of microbial community structure and diversity. Sequencing platforms like the Illumina Genome Analyzer II (GAI1) and the Applied Biosystems SOLiD enable experiments ...

  16. A Localized Algorithm for Parallel Association Mining \\Lambda Mohammed Javeed Zaki, Srinivasan Parthasarathy, and Wei Li

    E-Print Network [OSTI]

    Zaki, Mohammed Javeed

    a reduction at the end of each pass to construct the global patterns, thus incurring high synchronization cost. In this paper we describe a new parallel association min­ ing algorithm. Our algorithm is a result of detailed is local to each processor. After the initial set­up phase, the algorithm eliminates the need for further

  17. A Localized Algorithm for Parallel Association Mining Mohammed Javeed Zaki, Srinivasan Parthasarathy, and Wei Li

    E-Print Network [OSTI]

    Zaki, Mohammed Javeed

    a reduction at the end of each pass to construct the global patterns, thus incurring high synchronization cost. In this paper we describe a new parallel association min- ing algorithm. Our algorithm is a result of detailed is local to each processor. After the initial set-up phase, the algorithm eliminates the need for further

  18. Properties of Josephson junctions involving the cos(kx)cos(ky) pairing state in iron pnictides Wei-Feng Tsai,1 Dao-Xin Yao,1 B. Andrei Bernevig,2 and JiangPing Hu1

    E-Print Network [OSTI]

    Hu, Jiangping

    Properties of Josephson junctions involving the cos(kx)·cos(ky) pairing state in iron pnictides Wei; published 30 July 2009 We propose a trilayer -junction that takes advantage of the unconventional sx2y2 =cos kx cos ky pairing symmetry which changes sign between electron and hole Fermi pockets in the iron

  19. Effect of proton exchange on the nonlinear optical properties of LiNb& Wei-Yung Hsu,~) Craig S. Willand, Venkatraman Gopalan,a) and Moo1 C. Gupta

    E-Print Network [OSTI]

    Gopalan, Venkatraman

    Effect of proton exchange on the nonlinear optical properties of LiNb& and LiTaO, Wei-Yung Hsu 1992) The effect of proton exchange carried out using benzoic and pyrophosphoric acid on the nonlinear of proton exchange with either benzoic or pyrophosphoric acid under the conditions studied. Some recovery

  20. Migration of gold atoms in graphene ribbons: Role of the edges Wei Zhang,1 Litao Sun,2,* Zijian Xu,1 Arkady V. Krasheninnikov,3,4 Ping Huai,1 Zhiyuan Zhu,1 and F. Banhart5

    E-Print Network [OSTI]

    Krasheninnikov, Arkady V.

    Migration of gold atoms in graphene ribbons: Role of the edges Wei Zhang,1 Litao Sun,2,* Zijian Xu October 2009; revised manuscript received 24 January 2010; published 22 March 2010 The migration of gold to the other side of the sheet, but the Au atom can migrate in lateral direction together with the vacancy

  1. Survival and Aging in the Wild via Residual Demography Hans-Georg Muller1, Jane-Ling Wang1, Wei Yu2, Aurore Delaigle3 and James R. Carey4,5

    E-Print Network [OSTI]

    Müller, Hans-Georg

    Survival and Aging in the Wild via Residual Demography Hans-Georg M¨uller1, Jane-Ling Wang1, Wei Yu, La Jolla, CA 92093, USA 4Center for the Economics and Demography of Aging, University of California-mail: mueller@wald.ucdavis.edu 1 #12;Summary Information about the age distribution and survival of wild

  2. Low-Energy, High-Performance Lossless 8×8 SOA Switch

    E-Print Network [OSTI]

    Cheng, Q.; Wonfor, A.; Wei, J. L.; Penty, R. V.; White, I. H.

    2015-03-22

    /plain; charset=UTF-8 Low-Energy, High-Performance Lossless 8×8 SOA Switch Q. Cheng, A. Wonfor, J. L. Wei, R. V. Penty, I. H. White Centre for Photonic Systems, Electrical Division, Department of Engineering, University of Cambridge, Cambridge, United... capacity and energy consumption, both in the internet core and also within datacenters. Optical switch fabrics, which have been the subject of much research in recent years, are regarded as potential key components for meeting future communications...

  3. Scalable Routing in 3D High Genus Sensor Networks Using Graph Xiaokang Yu Xiaotian Yin Wei Han Jie Gao Xianfeng Gu

    E-Print Network [OSTI]

    Gao, Jie

    of environments that are otherwise difficult to access. Examples of such appli- cations include coal mine and the network has complex topology. We propose a routing scheme by first embedding the network on a surface with possibly non-zero genus. Then we compute a canonical hyperbolic metric of the embedded surface, and use

  4. Integrated High Speed Intelligent Utility Tie Unit for Disbursed/Renewable Generation Facilities Worakarn Wongsaichua, Wei-Jen Lee Soontorn Oraintara Chiman Kwan Frank Zhang

    E-Print Network [OSTI]

    Oraintara, Soontorn

    cycles or more. If an external fault happens, breaker B1 will shut down the fuel cell immediately as emergency and standby power supply. However, the mismatch between the utility tie protection and the equipment protection makes it impossible to use fuel cell and/or photovoltaic as emergency and standby power

  5. Bio-Derived Liquids to Hydrogen Distributed Reforming Working...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Short Contact Time Hydrogen Generator, Wei Wei, GE Global Research Distributed Bio-Oil Reforming, Darlene Steward, National Renewable Energy Laboratory High-Pressure Steam...

  6. 4. Wu, X., Bowers, B., Rao, K., Wei, Q., and Hammer, J.A., III. (1998). Visualization of

    E-Print Network [OSTI]

    Ryan, Michael J.

    1998-01-01

    . High frequency sounds usually attenuate (lose energy) more with distance than do low frequencies melanosome dispersion by regulating dynein. Curr. Biol. 17, 1721­1734. 11. Rodionov, V.I., Hope, A in their particular environment. Furthmore, the background sounds from wind, waves and other species can mask signals

  7. Heterogeneous and Anomalous Diffusion inside Lipid Tubules Lin Guo, Pramit Chowdhury, Jiyu Fang,*, and Feng Gai*,

    E-Print Network [OSTI]

    Shorter, James

    through rolled- up bilayer sheets in solutions,2-5 with diameters ranging from 10 nm to 2.0 µm, depending where the sustained release of antifouling agents preserved the paint coating for an extended period

  8. Meng Matt Wei July 22, 2010 Meng "Matt" Wei

    E-Print Network [OSTI]

    Sandwell, David T.

    Fault Creep Along the San Andreas Fault System · Advisor: Dr. David Sandwell 2000 ­ 2004 Peking Jolla, CA Ph.D., Geophysics, expected, March 2011 · Dissertation: Observations and Modeling of Shallow across the San Andreas Fault System: The Effects of Fault Dip, EOS Trans. AGU, Fall Meet. Suppl., S21B

  9. CURRICULUM VITAE YAXING WEI 1 of 13 Dr. Yaxing Wei

    E-Print Network [OSTI]

    Post, Wilfred M.

    an advanced GIS-based method and performed the analysis to assess potentials for new small hydropower sites) Assessment of the Effects of Climate Change on Federal Hydropower, 2) An Assessment of Energy Potential. National Hydropower Assets & Resources Assessment Project (NHAAP), funded by DOE Achievements: Created

  10. MICMIC--GPU:GPU: Hi hHi h P f C tiP f C tiHighHigh--Performance ComputingPerformance Computing

    E-Print Network [OSTI]

    Mueller, Klaus

    )Hardware (GPUs)Hardware (GPUs)Hardware (GPUs) ReferencesReferences Klaus Mueller Wei Xu Ziyi Zheng Fang Xu Computer Science C f Vi l C i Klaus Mueller, Wei Xu, Ziyi Zheng Fang Xu Siemens USA Research Center/EUROGRAPHICS Conference on Graphics Hardware pp 41-50, 2003. C. Rezk-Salama, K. Engel, M. Bauer, G. Greiner, and T. Ertl

  11. Quantum cutting mechanism in Tb3+-Yb3+ co-doped oxyfluoride glass Qianqian Duan, Feng Qin, Dan Wang, Wei Xu, Jianmin Cheng et al.

    E-Print Network [OSTI]

    Cao, Wenwu

    in the high energy region of the solar spectrum.1­5 Therefore, near infrared quantum cutting is a promising cutting using Re3þ -Yb3þ to enhance high energy absorbing efficiency for solar cells was first reported October 2011; published online 1 December 2011) Rate equations were created to describe cooperative

  12. SAND: A Fault-Tolerant Streaming Architecture for Network Traffic Analytics Qin Liu, John C.S. Lui, Cheng He, Lujia Pan, Wei Fan, Yunlong Shi

    E-Print Network [OSTI]

    Lui, John C.S.

    SAND: A Fault-Tolerant Streaming Architecture for Network Traffic Analytics Qin Liu, John C.S. Lui is essential for network analytics. In this paper, we present the design and implementation of SAND, a fault-tolerant distributed stream processing system for network analytics. SAND is designed to operate under high

  13. Retrieval of Cloud Microphysical Properties from MODIS and AIRS JUN LI,* HUNG-LUNG HUANG,* CHIAN-YI LIU,* PING YANG, TIMOTHY J. SCHMIT,# HELI WEI,

    E-Print Network [OSTI]

    Li, Jun

    Retrieval of Cloud Microphysical Properties from MODIS and AIRS JUN LI,* HUNG-LUNG HUANG,* CHIAN monitoring of the distribution of clouds during day and night. The MODIS is able to provide a high-spatial-resolution (1­5 km) cloud mask, cloud classification mask, cloud-phase mask, cloud-top pressure (CTP

  14. Microsoft PowerPoint - Gai_2014_CNMS_StaffScienceHighlight_NatureComm.pptx [Read-Only]

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformationJesse BergkampCentermillionStockpileEqualArrays ofDAKOTA Capabilityemergent

  15. Location: SNS CLO, Room C-156 UEC Members attending: Nazanin Bassiri-Gharb (Chair), Milan Buncick, Eric Formo, Zheng Gai,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousand CubicResourcelogo and-E CChinaC L S C OLocalTissue

  16. Jared D. Hooser,1 Mingjun Wei,2

    E-Print Network [OSTI]

    Wei, Mingjun

    ignition mechanism. Torsion cold working of polymers, vortex tube effects, and polymer friction were of gas dynamics such as stagnation heating and vortex flow 1 . Several other potential heat

  17. D. Chen*, A. Nakahara**, D. Wei

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit theCovalent Bonding inCustomer-Comments Sign InTAMUiv e in to LChen*, A.

  18. Wei Jiang | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout /Two0Photos andSeminars and Research & ReviewWeekly

  19. Su-Huai Wei - Research Fellow | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|SensitiveAprilPhotonStructureStudents today.Please Help

  20. NREL: Energy Sciences - Su-Huai Wei

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14RecentGeospatial Analysis To performNewsLin

  1. The Production of High Levels of Renewable Natural Gas from Biomass Using Steam Hydrogasification

    E-Print Network [OSTI]

    Thanmongkhon, Yoothana

    2014-01-01

    QG ASIFAL QD EC OM P D E1 GASIFIER QM IX QG ASIFI GASIOU T Rfor a circulating fluidized bed gasifier D EC OMP FEEDusing a dual fluidised bed gasifier, Fuel, 2012. 93, 61. Wei

  2. NTNU at SemSearch 2011 Krisztian Balog, Marek Ciglan, Robert Neumayer, Wei Wei, Kjetil Nrvg

    E-Print Network [OSTI]

    Nørvåg, Kjetil

    ]). The dataset for both tasks is the Billion Triple Challenge 2009 (BTC) collection. Our main emphasis on the BTC collec- tion (B): P(q|e) = N PN (q|e) + DPD(q|e) + (1 - N - D)PB(q|e). (2) We take PN (q

  3. MATHEMATICAL CHALLENGES IN HIGH-THROUGHPUT MICROCALORIMETER SPECTROSCOPY

    E-Print Network [OSTI]

    -Xavier Proulx, Universit´e de Montr´eal Yun Wei, University of Michigan Heng Zhu, University of Calgary Jielin sensor systems (Figure 1) have been developed at NIST, NASA, and else- where to measure the energy. These microcalorimeters have demonstrated relative energy resolution, depend- ing on the energy band, of better than 3

  4. High PRF high current switch

    DOE Patents [OSTI]

    Moran, Stuart L. (Fredericksburg, VA); Hutcherson, R. Kenneth (College Park, MD)

    1990-03-27

    A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

  5. 2011 Fall : Highly Distinguished Honors Highly Distinguished

    E-Print Network [OSTI]

    Kunkle, Tom

    Distinguished Beidler Katilyn V. Highly Distinguished Belanger Brett Russell Highly Distinguished Bell Lauren Ashley Highly Distinguished Bennett Caitlin Renee Highly Distinguished Berdusco Ann Marie Highly Highly Distinguished Bertel Jeffrey Robert Highly Distinguished Bettendorf Caitlin Marie Highly

  6. Wurtzite-derived polytypes of kesterite and stannite quaternary chalcogenide semiconductors Shiyou Chen,1,2 Aron Walsh,1,3 Ye Luo,1 Ji-Hui Yang,1 X. G. Gong,1 and Su-Huai Wei4

    E-Print Network [OSTI]

    Gong, Xingao

    for their potential application as solar-cell absorbers,1­9 photocatalysts for solar water splitting,10 thermoelectric-blende-derived structures, and wurtzite-stannite, which is a wurtzite-derived structure. In this paper, through a global-film solar-cell absorbers, which have shown conversion efficiencies as high as 10%.1,9 The wide application

  7. 2012 Spring : Highly Distinguished Honors Highly Distinguished

    E-Print Network [OSTI]

    Kunkle, Tom

    Distinguished Bell Lauren Ashley Highly Distinguished Benjamin Abigail Highly Distinguished Benson Alexandrea Hannah Elizabeth Highly Distinguished Bishop Anna Laurel Highly Distinguished Black Caitlin Emily Highly

  8. 2014 Fall : Highly Distinguished Honors Highly Distinguished

    E-Print Network [OSTI]

    Kunkle, Tom

    Morgan Highly Distinguished Beech Kaylie Schaefer Highly Distinguished Bell Brandi Lakeisha Highly Distinguished Billard Caitlin Rose Highly Distinguished Birk Christian Gustave Highly Distinguished Birkhead

  9. Experimental detection of 1pico-molar concentration from high-Q photonic crystal microcavity biosensors

    E-Print Network [OSTI]

    Chen, Ray

    biosensors Yi Zou1 , Swapnajit Chakravarty2 , Wei-Cheng Lai1 and Ray T. Chen1 1 Department of Electrical.chakravarty@omegaoptics.com, and raychen@uts.cc.utexas.edu Abstract--We experimentally demonstrate a photonic crystal microcavity biosensor Microcavity; Biosensor; Chemical Sensing; Photonic Crystal Waveguide I. INTRODUCTION Photonic crystal (PC

  10. Plane of nutrition as influencing reaction of breeding cows to high salt intake 

    E-Print Network [OSTI]

    Sells, Louis Vaughn

    1951-01-01

    -ht losses from each ~. "r oup can cc port'! ally attributed to we i;ht loss at calvin" ti. !e. 'yei ht losses for groups 1 and 2 cre considerably Sreator than thoso for groups 5 and 4 which received a full feed o" hay. he rather marked dro!? in wei ht...

  11. Inferring AJ Types for Concurrent Libraries Wei Huang Ana Milanova

    E-Print Network [OSTI]

    Milanova, Ana

    Troy, NY, USA {huangw5, milanova}@cs.rpi.edu Abstract Data-centric synchronization advocates data programming easier. Dolby et al. [9] proposed AJ, a type system for data-centric synchronization, and showed. Data-centric synchronization is a technique which advocates data-based synchronization as opposed

  12. RESUME of CHIU WEI-YI Personal Information

    E-Print Network [OSTI]

    Lin, Andrew Tien-Shun

    to Pleistocene basin development and sequence stratigraphy in northwest Taiwan. Advisor: Dr. Andrew Tien-Shun Lin;sedimentological study for the paper entitled "Sedimentology of early Pliocene sandstones in the South

  13. 332:466/591 Optoelectronics I Instructor: Wei Jiang

    E-Print Network [OSTI]

    Jiang, Wei

    . E. A. Saleh & M. C. Teich, Fundamentals of Photonics, Wiley-Interscience,2nd edition (2007), ISBN, Prentice Hall; 2nd edition (1996), ISBN 0134956567 (supplement on Semiconductors). · Amnon Yariv, Quantum Optoelectronic Devices (solar cell, WDM?) · Hot research topics (brief intro): Photonic Crystals, Plasmonics (if

  14. Modeling and optimization of a chiller plant Xiupeng Wei*

    E-Print Network [OSTI]

    Kusiak, Andrew

    . The chillers have varying energy efficiency. Since the chiller plant model derived from data-driven approach of chillers, cooling towers, pumps and chilled water storage tanks. It is frequently used to air conditioning was found and controlled to reduce fluc- tuation in chiller efficiency in different operating conditions

  15. Wei Vivien Shi Department of Electrical & Computer Engineering

    E-Print Network [OSTI]

    Wu, Mingshen

    cause of death in the United States, the development and improvement of medical devices is of great with bradycardias at rest. It can automatically control the heart rate to accurately track a desired preset profile based on dual-sensors. This controller offers good adaptation of the heart rate to the physiological

  16. Classification and regression trees Wei-Yin Loh

    E-Print Network [OSTI]

    Marshall, Hans-Peter

    . Algorithm 1 gives the pseudocode for the basic steps. Algorithm 1 Pseudocode for tree construction

  17. Approximate and Multipartite Quantum Correlation (Communication) Zhaohui Wei

    E-Print Network [OSTI]

    Jain, Rahul

    classical distributions or bipartite quantum states in the single-shot setting by Zhang (Proc. 3rd Innov that the cost to approximate a bipartite quantum state equals that to approximate its exact purifications, which the latter. We characterize the relationship between them by giving upper and lower bounds. 4

  18. Xixi Wei | Center for Bio-Inspired Solar Fuel Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired SolarAbout

  19. Wei-li W Lee | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking WithTelecentricN AProject AssessmentWe WebcamJune

  20. On Routing Schemes for Switch-Based In-Vehicle Shuhui Yang, Wei Li, and Wei Zhao

    E-Print Network [OSTI]

    Bystroff, Chris

    , network solutions we discover can be readily utilized in a wide range of practical automotive systems of functional components in different locations [Cho95] [KWMH96] [Kop99] [LH02a]. Before the era of automotive electronic systems, communication in the system was performed by mechanical or hydraulic means. A modern

  1. High Temperatures & Electricity Demand

    E-Print Network [OSTI]

    High Temperatures & Electricity Demand An Assessment of Supply Adequacy in California Trends.......................................................................................................1 HIGH TEMPERATURES AND ELECTRICITY DEMAND.....................................................................................................................7 SECTION I: HIGH TEMPERATURES AND ELECTRICITY DEMAND ..........................9 BACKGROUND

  2. High-Temperature-High-Volume Lifting for Enhanced Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Temperature-High-Volume Lifting for Enhanced Geothermal Systems High-Temperature-High-Volume Lifting for Enhanced Geothermal Systems High-Temperature-High-Volume Lifting for...

  3. High efficiency and high concentration in photovoltaics

    SciTech Connect (OSTI)

    Yamaguchi, Masafumi; Luque, A.

    1999-10-01

    In this paper, the authors present the state-of-the-art of multijunction solar cells and the future prospects of this technology. Their use in terrestrial applications will likely be for concentrators operating at very high concentrations. Some trends are also discussed and the authors present a cost calculation showing that highly efficient cells under very high concentration would be able to produce electricity at costs competitive with electricity generation costs for some utilities.

  4. High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HPC INL Logo Home High-Performance Computing INL's high-performance computing center provides general use scientific computing capabilities to support the lab's efforts in advanced...

  5. High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing HPC High Performance Computing (HPC) Providing world-class high performance computing capability that enables unsurpassed solutions to complex problems of strategic...

  6. High pressure, high current, low inductance, high reliability sealed terminals

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN) [Oak Ridge, TN; McKeever, John W. (Oak Ridge, TN) [Oak Ridge, TN

    2010-03-23

    The invention is a terminal assembly having a casing with at least one delivery tapered-cone conductor and at least one return tapered-cone conductor routed there-through. The delivery and return tapered-cone conductors are electrically isolated from each other and positioned in the annuluses of ordered concentric cones at an off-normal angle. The tapered cone conductor service can be AC phase conductors and DC link conductors. The center core has at least one service conduit of gate signal leads, diagnostic signal wires, and refrigerant tubing routed there-through. A seal material is in direct contact with the casing inner surface, the tapered-cone conductors, and the service conduits thereby hermetically filling the interstitial space in the casing interior core and center core. The assembly provides simultaneous high-current, high-pressure, low-inductance, and high-reliability service.

  7. HIGH-POWER, HIGH-EFFICIENCY FELS

    E-Print Network [OSTI]

    Sessler, A.M.

    2008-01-01

    M. Kumada, "Scaling of the FEL-ID Equations", ELF Note 128,Instability in a High-power, Short- Wavelength FEL", Proc.of the Ninth FEL" Conference, Williamsburg (1988), and

  8. High strength, high ductility low carbon steel

    DOE Patents [OSTI]

    Koo, Jayoung (Berkeley, CA); Thomas, Gareth (Berkeley, CA)

    1978-01-01

    A high strength, high ductility low carbon steel consisting essentially of iron, 0.05-0.15 wt% carbon, and 1-3 wt% silicon. Minor amounts of other constituents may be present. The steel is characterized by a duplex ferrite-martensite microstructure in a fibrous morphology. The microstructure is developed by heat treatment consisting of initial austenitizing treatment followed by annealing in the (.alpha. + .gamma.) range with intermediate quenching.

  9. Low Cost, High Temperature, High Ripple Current DC Bus Capacitors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Cost, High Temperature, High Ripple Current DC Bus Capacitors Low Cost, High Temperature, High Ripple Current DC Bus Capacitors 2010 DOE Vehicle Technologies and Hydrogen...

  10. Energy Storage Testing and Analysis High Power and High Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Testing and Analysis High Power and High Energy Development Energy Storage Testing and Analysis High Power and High Energy Development 2009 DOE Hydrogen Program and Vehicle...

  11. Large-dimension, high-ZT Thermoelectric Nanocomposites for High...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Large-dimension, high-ZT Thermoelectric Nanocomposites for High-Power High-efficiency Waste Heat Recovery for Electricity Generation Large-dimension, high-ZT Thermoelectric...

  12. High Performance Datacenter Networks

    E-Print Network [OSTI]

    Cortes, Corinna

    High Performance Datacenter Networks Architectures, Algorithms, and Opportunities #12;Synthesis architecture conferences, such as ISCA, HPCA, MICRO, and ASPLOS. High Performance Datacenter Networks Computer Architecture Daniel J. Sorin 2009 The Datacenter as a Computer: An Introduction to the Design

  13. High Performance Liquid Chromatography

    E-Print Network [OSTI]

    Nizkorodov, Sergey

    HPLC MEASUREMENT OF POLYCYCLIC AROMATIC HYDROCARBONS IN CIGARETTE SMOKE INTRODUCTION Even thoughHPLC - 1 High Performance Liquid Chromatography HPLC MEASUREMENT OF POLYCYCLIC AROMATIC HYDROCARBONS IN CIGARETTE SMOKE Last updated: June 17, 2014 #12;HPLC - 2 High Performance Liquid Chromatography

  14. High sensitivity accelerometers are

    E-Print Network [OSTI]

    Lee, Dongwon

    metamaterial - high-permittivity dielectric resonators embedded in a low-permittivity matrix for microwave that can process light at gigahertz frequencies Tunable dielectrics for microwave communication Integrated passive components Nanotube based solar cells High frequency ultrasound for nondestruc- tive

  15. 1920 IEEE TRANSACTIONS ON ELECTRON DEVICES, VOL. 61, NO. 6, JUNE 2014 On the Electrostatic Discharge

    E-Print Network [OSTI]

    for advanced semiconductor products. This demonstration of graphene's outstanding robustness against high Discharge Robustness of Graphene Hong Li, Member, IEEE, Christian C. Russ, Wei Liu, Member, IEEE, David study of electrostatic discharge (ESD) characterization of atomically thin graphene is reported

  16. CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS

    E-Print Network [OSTI]

    Collins, Gary S.

    CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS Catherine Smith, Brooks Lively, Wei of polymers. Emerging technologies have demonstrated the crucial need for highly conductive polymer combination between polycarbonate (PC) and hybrid concentrations of CNT and GNP nanofillers was investigated

  17. High performance systems

    SciTech Connect (OSTI)

    Vigil, M.B.

    1995-03-01

    This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

  18. High Performance Computing in

    E-Print Network [OSTI]

    Stamatakis, Alexandros

    High Performance Computing in Bioinformatics Thomas Ludwig (t.ludwig@computer.org) Ruprecht PART I: High Performance Computing Thomas Ludwig PART II: HPC Computing in Bioinformatics Alexandros #12;© Thomas Ludwig, Alexandros Stamatakis, GCB'04 3 PART I High Performance Computing Introduction

  19. High-performance combinatorial algorithms

    E-Print Network [OSTI]

    Pinar, Ali

    2003-01-01

    mathematics, and high performance computing. The numericalalgorithms on high performance computing platforms.algorithms on high performance computing platforms, which

  20. High power, high beam quality regenerative amplifier

    DOE Patents [OSTI]

    Hackel, Lloyd A. (Livermore, CA); Dane, Clifford B. (Livermore, CA)

    1993-01-01

    A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

  1. High power, high beam quality regenerative amplifier

    DOE Patents [OSTI]

    Hackel, L.A.; Dane, C.B.

    1993-08-24

    A regenerative laser amplifier system generates high peak power and high energy per pulse output beams enabling generation of X-rays used in X-ray lithography for manufacturing integrated circuits. The laser amplifier includes a ring shaped optical path with a limited number of components including a polarizer, a passive 90 degree phase rotator, a plurality of mirrors, a relay telescope, and a gain medium, the components being placed close to the image plane of the relay telescope to reduce diffraction or phase perturbations in order to limit high peak intensity spiking. In the ring, the beam makes two passes through the gain medium for each transit of the optical path to increase the amplifier gain to loss ratio. A beam input into the ring makes two passes around the ring, is diverted into an SBS phase conjugator and proceeds out of the SBS phase conjugator back through the ring in an equal but opposite direction for two passes, further reducing phase perturbations. A master oscillator inputs the beam through an isolation cell (Faraday or Pockels) which transmits the beam into the ring without polarization rotation. The isolation cell rotates polarization only in beams proceeding out of the ring to direct the beams out of the amplifier. The diffraction limited quality of the input beam is preserved in the amplifier so that a high power output beam having nearly the same diffraction limited quality is produced.

  2. *raychen@uts.cc.utexas.edu; phone 1 512-471-7035; fax 1 512-471-8575; bart.mer.utexas.edu:16080/Chen/optic-inter/ Silicon photonic crystal microarrays for high throughput label-free

    E-Print Network [OSTI]

    Chen, Ray

    *raychen@uts.cc.utexas.edu; phone 1 512-471-7035; fax 1 512-471-8575; bart.mer.utexas.edu:16080 cancer cell line lysates with sensitivity and specificity Swapnajit Chakravartya , Wei-Cheng Laib , Yi reduced the radiation loss and increased the stored energy in the photonic crystal microcavity resonance

  3. Highly directional thermal emitter

    DOE Patents [OSTI]

    Ribaudo, Troy; Shaner, Eric A; Davids, Paul; Peters, David W

    2015-03-24

    A highly directional thermal emitter device comprises a two-dimensional periodic array of heavily doped semiconductor structures on a surface of a substrate. The array provides a highly directional thermal emission at a peak wavelength between 3 and 15 microns when the array is heated. For example, highly doped silicon (HDSi) with a plasma frequency in the mid-wave infrared was used to fabricate nearly perfect absorbing two-dimensional gratings structures that function as highly directional thermal radiators. The absorption and emission characteristics of the HDSi devices possessed a high degree of angular dependence for infrared absorption in the 10-12 micron range, while maintaining high reflectivity of solar radiation (.about.64%) at large incidence angles.

  4. High voltage coaxial switch

    DOE Patents [OSTI]

    Rink, John P. (Los Alamos, NM)

    1983-07-19

    A coaxial high voltage, high current switch having a solid cylindrical cold cathode coaxially surrounded by a thin hollow cylindrical inner electrode and a larger hollow cylindrical outer electrode. A high voltage trigger between the cathode and the inner electrode causes electrons to be emitted from the cathode and flow to the inner electrode preferably through a vacuum. Some of the electrons penetrate the inner electrode and cause a volumetric discharge in the gas (which may be merely air) between the inner and outer electrodes. The discharge provides a low impedance path between a high voltage charge placed on the outer electrode and a load (which may be a high power laser) coupled to the inner electrode. For high repetition rate the gas between the inner and outer electrodes may be continuously exchanged or refreshed under pressure.

  5. High voltage coaxial switch

    DOE Patents [OSTI]

    Rink, J.P.

    1983-07-19

    A coaxial high voltage, high current switch having a solid cylindrical cold cathode coaxially surrounded by a thin hollow cylindrical inner electrode and a larger hollow cylindrical outer electrode. A high voltage trigger between the cathode and the inner electrode causes electrons to be emitted from the cathode and flow to the inner electrode preferably through a vacuum. Some of the electrons penetrate the inner electrode and cause a volumetric discharge in the gas (which may be merely air) between the inner and outer electrodes. The discharge provides a low impedance path between a high voltage charge placed on the outer electrode and a load (which may be a high power laser) coupled to the inner electrode. For high repetition rate the gas between the inner and outer electrodes may be continuously exchanged or refreshed under pressure. 3 figs.

  6. High pressure and high temperature apparatus

    DOE Patents [OSTI]

    Voronov, Oleg A.

    2005-09-13

    A design for high pressure/high temperature apparatus and reaction cell to achieve .about.30 GPa pressure in .about.1 cm volume and .about.100 GPa pressure in .about.1 mm volumes and 20-5000.degree. C. temperatures in a static regime. The device includes profiled anvils (28) action on a reaction cell (14, 16) containing the material (26) to be processed. The reaction cell includes a heater (18) surrounded by insulating layers and screens. Surrounding the anvils are cylindrical inserts and supporting rings (30-48) whose hardness increases towards the reaction cell. These volumes may be increased considerably if applications require it, making use of presses that have larger loading force capability, larger frames and using larger anvils.

  7. High output lamp with high brightness

    DOE Patents [OSTI]

    Kirkpatrick, Douglas A. (Great Falls, VA); Bass, Gary K. (Mt. Airy, MD); Copsey, Jesse F. (Germantown, MD); Garber, Jr., William E. (Poolesville, MD); Kwong, Vincent H. (Vancouver, CA); Levin, Izrail (Silver Spring, MD); MacLennan, Donald A. (Gaithersburg, MD); Roy, Robert J. (Frederick, MD); Steiner, Paul E. (Olney, MD); Tsai, Peter (Olney, MD); Turner, Brian P. (Damascus, MD)

    2002-01-01

    An ultra bright, low wattage inductively coupled electrodeless aperture lamp is powered by a solid state RF source in the range of several tens to several hundreds of watts at various frequencies in the range of 400 to 900 MHz. Numerous novel lamp circuits and components are disclosed including a wedding ring shaped coil having one axial and one radial lead, a high accuracy capacitor stack, a high thermal conductivity aperture cup and various other aperture bulb configurations, a coaxial capacitor arrangement, and an integrated coil and capacitor assembly. Numerous novel RF circuits are also disclosed including a high power oscillator circuit with reduced complexity resonant pole configuration, parallel RF power FET transistors with soft gate switching, a continuously variable frequency tuning circuit, a six port directional coupler, an impedance switching RF source, and an RF source with controlled frequency-load characteristics. Numerous novel RF control methods are disclosed including controlled adjustment of the operating frequency to find a resonant frequency and reduce reflected RF power, controlled switching of an impedance switched lamp system, active power control and active gate bias control.

  8. High Energy Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Large Scale Production Computing and Storage Requirements for High Energy Physics: Target 2017 HEPlogo.jpg The NERSC Program Requirements Review "Large Scale Computing and Storage...

  9. High Energy Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Computing Research Basic Energy Sciences Biological and Environmental Research Fusion Energy Sciences High Energy Physics Nuclear Physics Advanced Scientific Computing...

  10. High coking value pitch

    SciTech Connect (OSTI)

    Miller, Douglas J.; Chang, Ching-Feng; Lewis, Irwin C.; Lewis, Richard T.

    2014-06-10

    A high coking value pitch prepared from coal tar distillate and has a low softening point and a high carbon value while containing substantially no quinoline insolubles is disclosed. The pitch can be used as an impregnant or binder for producing carbon and graphite articles.

  11. High power, high frequency, vacuum flange

    DOE Patents [OSTI]

    Felker, B.; McDaniel, M.R.

    1993-03-23

    An improved waveguide flange is disclosed for high power operation that helps prevent arcs from being initiated at the junctions between waveguide sections. The flanges at the end of the waveguide sections have counter bores surrounding the waveguide tubes. When the sections are bolted together the counter bores form a groove that holds a fully annealed copper gasket. Each counterbore has a beveled step that is specially configured to insure the gasket forms a metal-to-metal vacuum seal without gaps or sharp edges. The resultant inner surface of the waveguide is smooth across the junctions between waveguide sections, and arcing is prevented.

  12. Response of High-Tc Superconductor Metamaterials to High Intensity...

    Office of Scientific and Technical Information (OSTI)

    Conference: Response of High-Tc Superconductor Metamaterials to High Intensity THz Radiation Citation Details In-Document Search Title: Response of High-Tc Superconductor...

  13. RECHARGEABLE HIGH-TEMPERATURE BATTERIES

    E-Print Network [OSTI]

    Cairns, Elton J.

    2014-01-01

    F. Eshman, High-Performance Batteries for Electric-VehicleS. Sudar, High Performance Batteries for Electric-VehicleHIGH-TEMPERATURE BATTERIES Elton J. Cairns January 1981 TWO-

  14. Sandia Energy - High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Performance Computing Home Energy Research Advanced Scientific Computing Research (ASCR) High Performance Computing High Performance Computingcwdd2015-03-18T21:41:24+00:00...

  15. Sandia Energy - High Pressure Chemistry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Pressure Chemistry Home Transportation Energy Predictive Simulation of Engines Combustion Chemistry Combustion Kinetics High Pressure Chemistry High Pressure ChemistryAshley...

  16. High pressure counterflow CHF.

    E-Print Network [OSTI]

    Walkush, Joseph Patrick

    1975-01-01

    This is a report of the experimental results of a program in countercurrent flow critical heat flux. These experiments were performed with Freon 113 at 200 psia in order to model a high pressure water system. An internally ...

  17. High pressure furnace

    DOE Patents [OSTI]

    Morris, D.E.

    1993-09-14

    A high temperature high pressure furnace has a hybrid partially externally heated construction. A metallic vessel fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum)). The disclosed alloy is fabricated into 11/4 or 2 inch, 32 mm or 50 mm bar stock and has a length of about 22 inches, 56 cm. This bar stock has an aperture formed therein to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the vessel is provided with a small blind aperture into which a thermocouple can be inserted. The closed end of the vessel is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior. 19 figures.

  18. Using High Performance Libraries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the QPI (Quick Path Interconnect) links). Using the QPI to simulate the slow memory (DDR memory) while using the memory on the near socket as the high bandwidth memory (MCDRAM...

  19. High pressure furnace

    DOE Patents [OSTI]

    Morris, Donald E. (Kensington, CA)

    1993-01-01

    A high temperature high pressure furnace has a hybrid partially externally heated construction. A metallic vessel fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 or 2 inch, 32 mm or 50 mm bar stock and has a length of about 22 inches, 56 cm. This bar stock has an aperture formed therein to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the vessel is provided with a small blind aperture into which a thermocouple can be inserted. The closed end of the vessel is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior.

  20. High-Temperature Superconductivity

    ScienceCinema (OSTI)

    Peter Johnson

    2010-01-08

    Like astronomers tweaking images to gain a more detailed glimpse of distant stars, physicists at Brookhaven National Laboratory have found ways to sharpen images of the energy spectra in high-temperature superconductors ? materials that carry electrical c

  1. High pressure oxygen furnace

    DOE Patents [OSTI]

    Morris, Donald E. (Kensington, CA)

    1992-01-01

    A high temperature high pressure oxygen furnace having a hybrid partially externally heated construction is disclosed. A metallic bar fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized (the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 inch bar stock and has a length of about 17 inches. This bar stock is gun drilled for over 16 inches of its length with 0.400 inch aperture to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the bar is provided with a small support aperture into which both a support and a thermocouple can be inserted. The closed end of the gun drilled bar is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior.

  2. High pressure oxygen furnace

    DOE Patents [OSTI]

    Morris, D.E.

    1992-07-14

    A high temperature high pressure oxygen furnace having a hybrid partially externally heated construction is disclosed. A metallic bar fabricated from an alloy having a composition of at least 45% nickel, 15% chrome, and 10% tungsten is utilized, the preferred alloy including 55% nickel, 22% chrome, 14% tungsten, 2% molybdenum, 3% iron (maximum) and 5% cobalt (maximum). The disclosed alloy is fabricated into 11/4 inch bar stock and has a length of about 17 inches. This bar stock is gun drilled for over 16 inches of its length with 0.400 inch aperture to define a closed high temperature, high pressure oxygen chamber. The opposite and closed end of the bar is provided with a small support aperture into which both a support and a thermocouple can be inserted. The closed end of the gun drilled bar is inserted into an oven, preferably heated by standard nickel chrome electrical elements and having a heavily insulated exterior. 5 figs.

  3. High-Speed Photography

    SciTech Connect (OSTI)

    Paisley, D.L.; Schelev, M.Y.

    1998-08-01

    The applications of high-speed photography to a diverse set of subjects including inertial confinement fusion, laser surgical procedures, communications, automotive airbags, lightning etc. are briefly discussed. (AIP) {copyright} {ital 1998 Society of Photo-Optical Instrumentation Engineers.}

  4. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-11-09

    This Guide provides approaches for implementing the High Performance Sustainable Building (HPSB) requirements of DOE Order 413.3B, Program and Project Management for the Acquisition of Capital Assets. Supersedes DOE G 413.3-6.

  5. Creating high performance enterprises

    E-Print Network [OSTI]

    Stanke, Alexis K. (Alexis Kristen), 1977-

    2006-01-01

    How do enterprises successfully conceive, design, deliver, and operate large-scale, engineered systems? These large-scale projects often involve high complexity, significant technical challenges, a large number of diverse ...

  6. High-temperature sensor

    DOE Patents [OSTI]

    Not Available

    1981-01-29

    A high temperature sensor is described which includes a pair of electrical conductors separated by a mass of electrical insulating material. The insulating material has a measurable resistivity within the sensor that changes in relation to the temperature of the insulating material within a high temperature range (1000 to 2000/sup 0/K). When required, the sensor can be encased within a ceramic protective coating.

  7. High efficiency incandescent lighting

    DOE Patents [OSTI]

    Bermel, Peter; Ilic, Ognjen; Chan, Walker R.; Musabeyoglu, Ahmet; Cukierman, Aviv Ruben; Harradon, Michael Robert; Celanovic, Ivan; Soljacic, Marin

    2014-09-02

    Incandescent lighting structure. The structure includes a thermal emitter that can, but does not have to, include a first photonic crystal on its surface to tailor thermal emission coupled to, in a high-view-factor geometry, a second photonic filter selected to reflect infrared radiation back to the emitter while passing visible light. This structure is highly efficient as compared to standard incandescent light bulbs.

  8. High conductivity composite metal

    DOE Patents [OSTI]

    Zhou, R.; Smith, J.L.; Embury, J.D.

    1998-01-06

    Electrical conductors and methods of producing them are disclosed, where the conductors possess both high strength and high conductivity. Conductors are comprised of carbon steel and a material chosen from a group consisting of copper, nickel, silver, and gold. Diffusion barriers are placed between these two materials. The components of a conductor are assembled and then the assembly is subjected to heat treating and mechanical deformation steps. 10 figs.

  9. High temperature pressure gauge

    DOE Patents [OSTI]

    Echtler, J. Paul (Pittsburgh, PA); Scandrol, Roy O. (Library, PA)

    1981-01-01

    A high temperature pressure gauge comprising a pressure gauge positioned in fluid communication with one end of a conduit which has a diaphragm mounted in its other end. The conduit is filled with a low melting metal alloy above the diaphragm for a portion of its length with a high temperature fluid being positioned in the remaining length of the conduit and in the pressure gauge.

  10. High Risk Plan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High HIGH PERFORMANCE

  11. High Burnup Effects Program

    SciTech Connect (OSTI)

    Barner, J.O.; Cunningham, M.E.; Freshley, M.D.; Lanning, D.D.

    1990-04-01

    This is the final report of the High Burnup Effects Program (HBEP). It has been prepared to present a summary, with conclusions, of the HBEP. The HBEP was an international, group-sponsored research program managed by Battelle, Pacific Northwest Laboratories (BNW). The principal objective of the HBEP was to obtain well-characterized data related to fission gas release (FGR) for light water reactor (LWR) fuel irradiated to high burnup levels. The HBEP was organized into three tasks as follows: Task 1 -- high burnup effects evaluations; Task 2 -- fission gas sampling; and Task 3 -- parameter effects study. During the course of the HBEP, a program that extended over 10 years, 82 fuel rods from a variety of sources were characterized, irradiated, and then examined in detail after irradiation. The study of fission gas release at high burnup levels was the principal objective of the program and it may be concluded that no significant enhancement of fission gas release at high burnup levels was observed for the examined rods. The rim effect, an as yet unquantified contributor to athermal fission gas release, was concluded to be the one truly high-burnup effect. Though burnup enhancement of fission gas release was observed to be low, a full understanding of the rim region and rim effect has not yet emerged and this may be a potential area of further research. 25 refs., 23 figs., 4 tabs.

  12. Thermoelectrics Partnership: High Performance Thermoelectric...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Performance Thermoelectric Waste Heat Recovery System Based on Zintl Phase Materials with Embedded Nanoparticles Thermoelectrics Partnership: High Performance Thermoelectric...

  13. High surface area, high permeability carbon monoliths

    SciTech Connect (OSTI)

    Lagasse, R.R.; Schroeder, J.L. [Sandia National Labs., Albuquerque, NM (United States). Organic Materials Processing Dept.

    1994-12-31

    The goal of this work is to prepare carbon monoliths having precisely tailored pore size distribution. Prior studies have demonstrated that poly(acrylonitrile) can be processed into a precursor having tailored macropore structure. Since the macropores were preserved during pyrolysis, this synthetic process provided a route to porous carbon having macropores with size =0.1 to 10{mu}m. No micropores of size <2 nm could be detected in the carbon, however, by nitrogen adsorption. In the present work, the authors have processed a different polymer, poly(vinylidene chloride) into a macroporous precursor, Pyrolysis produced carbon monoliths having macropores derived from the polymer precursor as well as extensive microporosity produced during the pyrolysis of the polymer. One of these carbons had BET surface area of 1,050 m{sup 2}/g and about 1.2 cc/g total pore volume, with about 1/3 of the total pore volume in micropores and the remainder in 1{mu}m macropores. No mesopores in the intermediate size range could be detected by nitrogen adsorption. Carbon materials having high surface area as well as micron size pores have potential applications as electrodes for double layer supercapacitors containing liquid electrolyte, or as efficient media for performing chemical separations.

  14. High pressure melt ejection

    SciTech Connect (OSTI)

    Tarbell, W.W.; Brockmann, J.E.; Pilch, M.

    1983-01-01

    Recent probabilistic risk assessments have identified the potential for reactor pressure vessel failure while the reactor coolant system is at elevated pressure. The analyses postulate that the blowdown of steam and hydrogen into the reactor cavity will cause the core material to be swept from the cavity region into the containment building. The High Pressure Melt Streaming (HIPS) program is an experimental study of the high pressure ejection of molten material and subsequent interactions within a concrete cavity. The program focuses on using prototypic system conditions and scaled models of reactor geometries to accurately simulate the ex-vessel processes during high-pressure accident sequences. Scaling analyses of the experiment show that the criteria established for core debris removal from the cavity are met or exceeded. Tests are performed at two scales, representing 1/10th and 1/20th linear reproductions of the Zion reactor plant. Results of the 1/20th scale tests are presented.

  15. High resolution data acquisition

    DOE Patents [OSTI]

    Thornton, G.W.; Fuller, K.R.

    1993-04-06

    A high resolution event interval timing system measures short time intervals such as occur in high energy physics or laser ranging. Timing is provided from a clock, pulse train, and analog circuitry for generating a triangular wave synchronously with the pulse train (as seen in diagram on patent). The triangular wave has an amplitude and slope functionally related to the time elapsed during each clock pulse in the train. A converter forms a first digital value of the amplitude and slope of the triangle wave at the start of the event interval and a second digital value of the amplitude and slope of the triangle wave at the end of the event interval. A counter counts the clock pulse train during the interval to form a gross event interval time. A computer then combines the gross event interval time and the first and second digital values to output a high resolution value for the event interval.

  16. High Metallicity LGRB Hosts

    E-Print Network [OSTI]

    Graham, J F; Levesque, E M; Kewley, L J; Tanvir, N R; Levan, A J; Patel, S K; Misra, K; Huang, K -H; Reichart, D E; Nysewander, M; Schady, P

    2015-01-01

    We present our imaging and spectroscopic observations of the host galaxies of two dark long bursts with anomalously high metallicities, LGRB 051022 and LGRB 020819B, which in conjunction with another LGRB event with an optical afterglow comprise the three LGRBs with high metallicity host galaxies in the Graham & Fruchter (2013) sample. In Graham & Fruchter (2013), we showed that LGRBs exhibit a strong and apparently intrinsic preference for low metallicity environments (12+log(O/H) & redshift. This is surprising: even among a preselected sample of high metallicity LGRBs, were the metal aversion to remain in effect for these objects, we would expect their metallicity to still be lower than the typical metallicity for the galaxies at that luminosity and redshift. Therefore we deduce that it...

  17. High resolution data acquisition

    DOE Patents [OSTI]

    Thornton, Glenn W. (Los Alamos, NM); Fuller, Kenneth R. (Los Alamos, NM)

    1993-01-01

    A high resolution event interval timing system measures short time intervals such as occur in high energy physics or laser ranging. Timing is provided from a clock (38) pulse train (37) and analog circuitry (44) for generating a triangular wave (46) synchronously with the pulse train (37). The triangular wave (46) has an amplitude and slope functionally related to the time elapsed during each clock pulse in the train. A converter (18, 32) forms a first digital value of the amplitude and slope of the triangle wave at the start of the event interval and a second digital value of the amplitude and slope of the triangle wave at the end of the event interval. A counter (26) counts the clock pulse train (37) during the interval to form a gross event interval time. A computer (52) then combines the gross event interval time and the first and second digital values to output a high resolution value for the event interval.

  18. High-energy detector

    DOE Patents [OSTI]

    Bolotnikov, Aleksey E. (South Setauket, NY); Camarda, Giuseppe (Farmingville, NY); Cui, Yonggang (Upton, NY); James, Ralph B. (Ridge, NY)

    2011-11-22

    The preferred embodiments are directed to a high-energy detector that is electrically shielded using an anode, a cathode, and a conducting shield to substantially reduce or eliminate electrically unshielded area. The anode and the cathode are disposed at opposite ends of the detector and the conducting shield substantially surrounds at least a portion of the longitudinal surface of the detector. The conducting shield extends longitudinally to the anode end of the detector and substantially surrounds at least a portion of the detector. Signals read from one or more of the anode, cathode, and conducting shield can be used to determine the number of electrons that are liberated as a result of high-energy particles impinge on the detector. A correction technique can be implemented to correct for liberated electron that become trapped to improve the energy resolution of the high-energy detectors disclosed herein.

  19. High strength alloys

    DOE Patents [OSTI]

    Maziasz, Phillip James; Shingledecker, John Paul; Santella, Michael Leonard; Schneibel, Joachim Hugo; Sikka, Vinod Kumar; Vinegar, Harold J.; John, Randy Carl; Kim, Dong Sub

    2012-06-05

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tublar that is at least partially made from a material containing at least one of the metal alloys.

  20. High strength alloys

    DOE Patents [OSTI]

    Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

    2010-08-31

    High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

  1. Highly Effective Actions

    E-Print Network [OSTI]

    John H. Schwarz

    2013-11-22

    It is conjectured that the world-volume action of a probe D3-brane in an $AdS_5 \\times S^5$ background of type IIB superstring theory, with one unit of flux, can be reinterpreted as the exact effective action (or highly effective action) for U(2), ${\\cal N} = 4$ super Yang-Mills theory on the Coulomb branch. An analogous conjecture for $U(2)_k \\times U(2)_{-k} $ ABJM theory is also presented. The main evidence supporting these conjectures is that the brane actions have all of the expected symmetries and dualities. Highly effective actions have general coordinate invariance, even though they describe nongravitational theories.

  2. High-Tc Superconductor

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energy neutronHigh-Pressure MOF ResearchEnergyDonghui Lu,

  3. High-fidelity Modeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energy neutronHigh-Pressure MOFElectricityBiofuel

  4. High-speed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energy neutronHigh-PressureLaboratoryspeed three-wave

  5. High-␤,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energy neutronHigh-PressureLaboratoryspeed

  6. Delta Drinking Water Quality and TreatmentDelta Drinking Water Quality and Treatment WeiWei--Hsiang ChenHsiang Chen

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    ­ ozonation use, ()- Under construction SOURCE: CALFED (2005) and MWDSC (http://www.mwdh2o.com/index.htm ) #1211 Delta Drinking Water Quality and TreatmentDelta Drinking Water Quality and Treatment CostsCosts · Treatments for Delta water quality conditions to minimize cost within technology limits. · Results using

  7. Concepts for High Availability in Scientific High-End Computing

    E-Print Network [OSTI]

    Engelmann, Christian

    Concepts for High Availability in Scientific High-End Computing Christian Engelmann 1,2 and Stephen 2 Department of Computer Science The University of Reading, Reading, UK High Availability and Stephen L. Scott, Oak Ridge National Laboratory Concepts for High Availability in Scientific High

  8. High Energy Photoproduction

    E-Print Network [OSTI]

    J. M. Butterworth; M. Wing

    2005-09-15

    The experimental and phenomenological status of high energy photoproduction is reviewed. Topics covered include the structure of the photon, production of jets, heavy flavours and prompt photons, rapidity gaps, energy flow and underlying events. The results are placed in the context of the current understanding of QCD, with particular application to present and future hadron and lepton colliders.

  9. High temperature storage battery

    SciTech Connect (OSTI)

    Sammells, A.F.

    1988-06-07

    A high temperature electrochemical cell is described comprising: a solid-state divalent cation conducting electrolyte; a positive electrode in contact with the electrolyte; a solid-state negative electrode contacting a divalent cation conducting molten salt mediating agent providing ionic mediation between the solid-state negative electrode and the solid-state electrolyte.

  10. High Power Cryogenic Targets

    SciTech Connect (OSTI)

    Gregory Smith

    2011-08-01

    The development of high power cryogenic targets for use in parity violating electron scattering has been a crucial ingredient in the success of those experiments. As we chase the precision frontier, the demands and requirements for these targets have grown accordingly. We discuss the state of the art, and describe recent developments and strategies in the design of the next generation of these targets.

  11. High Temperature ESP Monitoring

    Broader source: Energy.gov [DOE]

    The purpose of the High Temperature ESP Monitoring project is to develop a down-hole monitoring system to be used in wells with bottom hole temperature up to 300 °C for measuring motor temperature; pump discharge pressure; and formation temperature and pressure.

  12. High speed door assembly

    DOE Patents [OSTI]

    Shapiro, C.

    1993-04-27

    A high speed door assembly is described, comprising an actuator cylinder and piston rods, a pressure supply cylinder and fittings, an electrically detonated explosive bolt, a honeycomb structured door, a honeycomb structured decelerator, and a structural steel frame encasing the assembly to close over a 3 foot diameter opening within 50 milliseconds of actuation, to contain hazardous materials and vapors within a test fixture.

  13. High speed door assembly

    DOE Patents [OSTI]

    Shapiro, Carolyn (Idaho Falls, ID)

    1993-01-01

    A high speed door assembly, comprising an actuator cylinder and piston rods, a pressure supply cylinder and fittings, an electrically detonated explosive bolt, a honeycomb structured door, a honeycomb structured decelerator, and a structural steel frame encasing the assembly to close over a 3 foot diameter opening within 50 milliseconds of actuation, to contain hazardous materials and vapors within a test fixture.

  14. High expression Zymomonas promoters

    DOE Patents [OSTI]

    Viitanen, Paul V. (West Chester, PA); Tao, Luan (Havertown, PA); Zhang, Yuying (New Hope, PA); Caimi, Perry G. (Kennett Square, PA); McCole, Laura (East Fallowfield, PA): Zhang, Min (Lakewood, CO); Chou, Yat-Chen (Lakewood, CO); McCutchen, Carol M. (Wilmington, DE); Franden, Mary Ann (Centennial, CO)

    2011-08-02

    Identified are mutants of the promoter of the Z. mobilis glyceraldehyde-3-phosphate dehydrogenase gene, which direct improved expression levels of operably linked heterologous nucleic acids. These are high expression promoters useful for expression of chimeric genes in Zymomonas, Zymobacter, and other related bacteria.

  15. High Performance Sustainable Building

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-20

    The guide supports DOE O 413.3A and provides useful information on the incorporation of high performance sustainable building principles into building-related General Plant Projects and Institutional General Plant Projects at DOE sites. Canceled by DOE G 413.3-6A. Does not cancel other directives.

  16. CSTI high capacity power

    SciTech Connect (OSTI)

    Winter, J.M.

    1994-09-01

    The SP-100 program was established in 1983 by DOD, DOE, and NASA as a joint program to develop the technology necessary for space nuclear power systems for military and civil application. During FY86 and 87, the NASA SP-100 Advanced Technology Program was devised to maintain the momentum of promising technology advancement efforts started during Phase I of SP-100 and to strengthen, in key areas, the chances for successful development and growth capability of space nuclear reactor power systems for future space applications. In FY88, the Advanced Technology Program was incorporated into NASA`s new Civil Space Technology Initiative (CSTI). The CSTI Program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA SP-100 Advanced Technology project, and provides a bridge to NASA Project Pathfinder. The elements of CSTI High Capacity Power development include Conversion Systems, Thermal Management, Power Management, System Diagnostics, and Environmental Interactions. Technology advancement in all areas, including materials, is required to assure the high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems. The overall program will develop and demonstrate the technology base required to provide a wide range of modular power systems as well as allowing mission independence from solar and orbital attitude requirements. Several recent advancements in CSTI High Capacity power development will be discussed.

  17. High Selectivity Oxygen Delignification

    SciTech Connect (OSTI)

    Arthur J. Ragauskas

    2005-09-30

    The overall objective of this program was to develop improved extended oxygen delignification (EOD) technologies for current U.S. pulp mill operations. This was accomplished by: (1) Identifying pulping conditions that optimize O and OO performance; (2) Identifying structural features of lignin that enhance reactivity towards EOD of high kappa pulps; (3) Identifying factors minimizing carbohydrate degradation and improve pulp strength of EOD high kappa pulps; (4) Developing a simple, reproducible method of quantifying yield gains from EOD; and (5) Developing process conditions that significantly reduce the capital requirements of EOD while optimizing the yield benefits. Key research outcomes included, demonstrating the use of a mini-O sequence such as (E+O)Dkf:0.05(E+O) or Dkf:0.05(E+O)(E+O) without interstage washing could capture approximately 60% of the delignification efficiency of a conventional O-stage without the major capital requirements associated with an O-stage for conventional SW kraft pulps. The rate of formation and loss of fiber charge during an O-stage stage can be employed to maximize net fiber charge. Optimal fiber charge development and delignification are two independent parameters and do not parallel each other. It is possible to utilize an O-stage to enhance overall cellulosic fiber charge of low and high kappa SW kraft pulps which is beneficial for physical strength properties. The application of NIR and multi-variant analysis was developed into a rapid and simple method of determining the yield of pulp from an oxygen delignification stage that has real-world mill applications. A focus point of this program was the demonstration that Kraft pulping conditions and oxygen delignification of high and low-kappa SW and HW pulps are intimately related. Improved physical pulp properties and yield can be delivered by controlling the H-factor and active alkali charge. Low AA softwood kraft pulp with a kappa number 30 has an average improvement of 2% in yield and 4 cP in viscosity in comparison to high AA pulp for the oxygen delignification. This difference is also seen for high-kappa SW kraft pulps with an average improvement of {approx}3% in yield and 3 cP in viscosity for low AA high kappa number 50 pulp. Low AA hardwood kappa number 20 pulp had an average improvement of {approx}4% in yield and 6-12 cP in viscosity as compared to high AA pulp. Lower kraft cooking temperature (160 vs. 170 C) in combination with the medium AA provides a practical approach for integrating high kappa pulping of hardwoods (i.e., low rejects) with an advanced extended oxygen delignification stage. ECF pulp bleaching of low and high kappa kraft SW and HW pulps exhibit comparable optical and physical strength properties when bleached D(EPO)D.

  18. Intravascular photoacoustic imaging at 35 and 80 MHz

    E-Print Network [OSTI]

    Li, Xiang; Wei, Wei; Zhou, Qifa; Shung, K. Kirk; Chen, Zhongping

    2012-01-01

    Li Wei Wei Qifa Zhou K. Kirk Shung Zhongping Chen Journal ofWei, b,c* Qifa Zhou, a K. Kirk Shung, a and Zhongping Chen

  19. California high speed rail proposal: “High speed rail and wildlife”

    E-Print Network [OSTI]

    Wilkerson, Cynthia

    2005-01-01

    Chapter Wildlife and High Speed Rail C ALIFORNIA H IGH SDan Leavitt, California High Speed Rail Authority) AbstractThe California High Speed Rail (HSR) Proposal is in the

  20. Novel Refractory Materials for High-Temperature, High-Alkaline...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications Can be used in high-temperature, high-alkaline furnaces and process vessels found in aluminum, chemical, forest products, glass, and steel industries....

  1. Mesoporous Manganese Oxide Nanowires for High-Capacity, High...

    Office of Scientific and Technical Information (OSTI)

    Mesoporous Manganese Oxide Nanowires for High-Capacity, High-Rate, Hybrid Electrical Energy Storage Citation Details In-Document Search Title: Mesoporous Manganese Oxide Nanowires...

  2. High Temperature ESP Monitoring

    SciTech Connect (OSTI)

    Jack Booker; Brindesh Dhruva

    2011-06-20

    The objective of the High Temperature ESP Monitoring project was to develop a downhole monitoring system to be used in wells with bottom hole well temperatures up to 300°C for measuring motor temperature, formation pressure, and formation temperature. These measurements are used to monitor the health of the ESP motor, to track the downhole operating conditions, and to optimize the pump operation. A 220 ºC based High Temperature ESP Monitoring system was commercially released for sale with Schlumberger ESP motors April of 2011 and a 250 ºC system with will be commercially released at the end of Q2 2011. The measurement system is now fully qualified, except for the sensor, at 300 °C.

  3. High frequency reference electrode

    DOE Patents [OSTI]

    Kronberg, J.W.

    1994-05-31

    A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes. 4 figs.

  4. High frequency reference electrode

    DOE Patents [OSTI]

    Kronberg, James W. (Aiken, SC)

    1994-01-01

    A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or "halo" at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes.

  5. Ultra High Energy Fermions

    E-Print Network [OSTI]

    Burra G. Sidharth

    2015-04-07

    The LHC in Geneva is already operating at a total energy of $7 TeV$ and hopefully after a pause in 2012, it will attain its full capacity of $14 TeV$ in 2013. These are the highest energies achieved todate in any accelerator. It is against this backdrop that it is worthwhile to revisit very high energy collisions of Fermions (Cf. also \\cite{bgspp}). We will in fact examine their behaviour at such energies.

  6. High voltage pulse conditioning

    DOE Patents [OSTI]

    Springfield, Ray M. (Sante Fe, NM); Wheat, Jr., Robert M. (Los Alamos, NM)

    1990-01-01

    Apparatus for conditioning high voltage pulses from particle accelerators in order to shorten the rise times of the pulses. Flashover switches in the cathode stalk of the transmission line hold off conduction for a determinable period of time, reflecting the early portion of the pulses. Diodes upstream of the switches divert energy into the magnetic and electrostatic storage of the capacitance and inductance inherent to the transmission line until the switches close.

  7. High current ion source

    DOE Patents [OSTI]

    Brown, Ian G. (1088 Woodside Rd., Berkeley, CA 94708); MacGill, Robert A. (645 Kern St., Richmond, CA 94805); Galvin, James E. (2 Commodore Dr. #276, Emeryville, CA 94608)

    1990-01-01

    An ion source utilizing a cathode and anode for producing an electric arc therebetween. The arc is sufficient to vaporize a portion of the cathode to form a plasma. The plasma leaves the generation region and expands through another regon. The density profile of the plasma may be flattened using a magnetic field formed within a vacuum chamber. Ions are extracted from the plasma to produce a high current broad on beam.

  8. High Performance Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High PerformancePerformance

  9. High pressure ceramic joint

    DOE Patents [OSTI]

    Ward, Michael E. (Poway, CA); Harkins, Bruce D. (San Diego, CA)

    1993-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  10. High pressure ceramic joint

    DOE Patents [OSTI]

    Ward, M.E.; Harkins, B.D.

    1993-11-30

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present joint when used with recuperators increases the use of ceramic components which do not react to highly corrosive gases. Thus, the present joint used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present joint is comprised of a first ceramic member, a second ceramic member, a mechanical locking device having a groove defined in one of the first ceramic member and the second ceramic member. The joint and the mechanical locking device is further comprised of a refractory material disposed in the groove and contacting the first ceramic member and the second ceramic member. The present joint mechanically provides a high strength load bearing joint having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 4 figures.

  11. High Energy Density Microwaves

    SciTech Connect (OSTI)

    Phillips, R.M. [Stanford Linear Accelerator Center, Stanford, CA 94309 (United States)

    1999-04-01

    These proceedings represent papers presented at the RF98 Workshop entitled `High Energy Density Microwaves` held in California in October, 1998. The topics discussed were predominantly accelerator{minus}related. The Workshop dealt, for the most part, with the generation and control of electron beams, the amplification of RF signals, the design of mode converters, and the effect of very high RF field gradients. This Workshop was designed to address the concerns of the microwave tube industry worldwide, the plasma physicists who deal with very high beam currents and gigawatts of RF power, and researchers in accelerator centers around the world. Papers were presented on multibeam klystrons, gyrotron development, plasmas in microwave tubes, RF breakdown, and alternatives to conventional linear coliders at 1 TeV and above. The Workshop was partially sponsored by the US Department of Energy. There were 46 papers presented at the conference,out of which 19 have been abstracted for the Energy,Science and Technology database.(AIP)

  12. High temperature interfacial superconductivity

    DOE Patents [OSTI]

    Bozovic, Ivan (Mount Sinai, NY); Logvenov, Gennady (Port Jefferson Station, NY); Gozar, Adrian Mihai (Port Jefferson, NY)

    2012-06-19

    High-temperature superconductivity confined to nanometer-scale interfaces has been a long standing goal because of potential applications in electronic devices. The spontaneous formation of a superconducting interface in bilayers consisting of an insulator (La.sub.2CuO.sub.4) and a metal (La.sub.1-xSr.sub.xCuO.sub.4), neither of which is superconducting per se, is described. Depending upon the layering sequence of the bilayers, T.sub.c may be either .about.15 K or .about.30 K. This highly robust phenomenon is confined to within 2-3 nm around the interface. After exposing the bilayer to ozone, T.sub.c exceeds 50 K and this enhanced superconductivity is also shown to originate from a 1 to 2 unit cell thick interfacial layer. The results demonstrate that engineering artificial heterostructures provides a novel, unconventional way to fabricate stable, quasi two-dimensional high T.sub.c phases and to significantly enhance superconducting properties in other superconductors. The superconducting interface may be implemented, for example, in SIS tunnel junctions or a SuFET.

  13. High energy physics

    SciTech Connect (OSTI)

    Kernan, A.; Shen, B.C.; Ma, E.

    1997-07-01

    This proposal is for the continuation of the High Energy Physics program at the University of California at Riverside. In hadron collider physics the authors will complete their transition from experiment UA1 at CERN to the DZERO experiment at Fermilab. On experiment UA1 their effort will concentrate on data analysis at Riverside. At Fermilab they will coordinate the high voltage system for all detector elements. They will also carry out hardware/software development for the D0 muon detector. The TPC/Two-Gamma experiment has completed its present phase of data-taking after accumulating 160 pb{sup {minus}}1 of luminosity. The UC Riverside group will continue data and physics analysis and make minor hardware improvement for the high luminosity run. The UC Riverside group is participating in design and implementation of the data acquisition system for the OPAL experiment at LEP. Mechanical and electronics construction of the OPAL hadron calorimeter strip readout system is proceeding on schedule. Data analysis and Monte Carlo detector simulation efforts are proceeding in preparation for the first physics run when IEP operation comenses in fall 1989.

  14. High Performance Computing School COMSC

    E-Print Network [OSTI]

    Martin, Ralph R.

    High Performance Computing School COMSC This module aims to provide the students with fundamental knowledge and understanding of techniques associated with High Performance Computing and its practical' skills in analysing and evaluating High Performance Computing and will be structured around

  15. High Energy Density Laboratory Plasmas

    E-Print Network [OSTI]

    High Energy Density Laboratory Plasmas General Plasma Science Developing founda/ons and advancing fundamental understanding #12;The High Energy Density developing innovative techniques to study the properties of instabilities in magnetized-high-energy-density

  16. High Performance Computing Center IT DIVISION -HIGH PERFORMANCE COMPUTING CENTER

    E-Print Network [OSTI]

    Rock, Chris

    . It will ensure that Texas Tech retains superior computing and visualization facilities. #12;High PerformanceHigh Performance Computing Center 9/27/2004 1 IT DIVISION - HIGH PERFORMANCE COMPUTING CENTER STRATEGIC PLAN MISSION STATEMENT The High Performance Computing Center (HPCC) promotes research and teaching

  17. High Availability for High-End Scientific A Dissertation

    E-Print Network [OSTI]

    Engelmann, Christian

    High Availability for High-End Scientific Computing A Dissertation Submitted In Partial Fulfilment in the area of high availability is essential to meet the needs to sustain the current growth. This thesis introduces a new approach to high availability which focuses on the head node of a cluster system

  18. HIGH EFFICIENCY SYNGAS GENERATION

    SciTech Connect (OSTI)

    Robert J. Copeland; Yevgenia Gershanovich; Brian Windecker

    2005-02-01

    This project investigated an efficient and low cost method of auto-thermally reforming natural gas to hydrogen and carbon monoxide. Reforming is the highest cost step in producing products such as methanol and Fisher Tropsch liquids (i.e., gas to liquids); and reducing the cost of reforming is the key to reducing the cost of these products. Steam reforming is expensive because of the high cost of the high nickel alloy reforming tubes (i.e., indirectly fired reforming tubes). Conventional auto-thermal or Partial Oxidation (POX) reforming minimizes the size and cost of the reformers and provides a near optimum mixture of CO and hydrogen. However POX requires pure oxygen, which consumes power and significantly increases the cost to reforming. Our high efficiency process extracts oxygen from low-pressure air with novel oxygen sorbent and transfers the oxygen to a nickel-catalyzed reformer. The syngas is generated at process pressure (typically 20 to 40 bar) without nitrogen dilution and has a 1CO to 2H{sub 2} ratio that is near optimum for the subsequent production of Fisher-Tropsch liquid to liquids and other chemicals (i.e., Gas to Liquids, GTL). Our high process efficiency comes from the way we transfer the oxygen into the reformer. All of the components of the process, except for the oxygen sorbent, are commonly used in commercial practice. A process based on a longlived, regenerable, oxygen transfer sorbent could substantially reduce the cost of natural gas reforming to syngas. Lower cost syngas (CO + 2H{sub 2}) that is the feedstock for GTL would reduce the cost of GTL and for other commercial applications (e.g., methanol, other organic chemicals). The vast gas resources of Alaska's North Slope (ANS) offer more than 22 Tcf of gas and GTL production in this application alone, and could account for as much as 300,000 to 700,000 bpd for 20 to 30+ years. We developed a new sorbent, which is an essential part of the High Efficiency Oxygen Process (HOP). We tested the sorbent and observed that it has both a good oxygen capacity and operates as a highly effective reforming catalyst. We conducted a long duration tests of the sorbent (1,500 hours of continuous operation in the HOP cycle). Although the sorbent lost some oxygen capacity with cycling, the sorbent oxygen capacity stabilized after 1,000 hours and remained constant to the end of the test, 1,500 hour. The activity of the catalyst to reform methane to a hydrogen and carbon monoxide mixture was unchanged through the oxidation/reduction cycling. Our cost and performance analyses indicated a significant reduction in the cost of GTL production when using the HOP process integrated into a GTL plant.

  19. Theoretical High Energy Physics

    SciTech Connect (OSTI)

    Christ, Norman H.; Weinberg, Erick J.

    2014-07-14

    we provide reports from each of the six faculty supported by the Department of Energy High Energy Physics Theory grant at Columbia University. Each is followed by a bibliography of the references cited. A complete list of all of the publications in the 12/1/2010-04/30/2014 period resulting from research supported by this grant is provided in the following section. The final section lists the Ph.D. dissertations based on research supported by the grant that were submitted during this period.

  20. High speed flywheel

    DOE Patents [OSTI]

    McGrath, Stephen V. (Knoxville, TN)

    1991-01-01

    A flywheel for operation at high speeds utilizes two or more ringlike coments arranged in a spaced concentric relationship for rotation about an axis and an expansion device interposed between the components for accommodating radial growth of the components resulting from flywheel operation. The expansion device engages both of the ringlike components, and the structure of the expansion device ensures that it maintains its engagement with the components. In addition to its expansion-accommodating capacity, the expansion device also maintains flywheel stiffness during flywheel operation.

  1. High flux reactor

    DOE Patents [OSTI]

    Lake, James A. (Idaho Falls, ID); Heath, Russell L. (Idaho Falls, ID); Liebenthal, John L. (Idaho Falls, ID); DeBoisblanc, Deslonde R. (Summit, NJ); Leyse, Carl F. (Idaho Falls, ID); Parsons, Kent (Idaho Falls, ID); Ryskamp, John M. (Idaho Falls, ID); Wadkins, Robert P. (Idaho Falls, ID); Harker, Yale D. (Idaho Falls, ID); Fillmore, Gary N. (Idaho Falls, ID); Oh, Chang H. (Idaho Falls, ID)

    1988-01-01

    A high flux reactor is comprised of a core which is divided into two symetric segments housed in a pressure vessel. The core segments include at least one radial fuel plate. The spacing between the plates functions as a coolant flow channel. The core segments are spaced axially apart such that a coolant mixing plenum is formed between them. A channel is provided such that a portion of the coolant bypasses the first core section and goes directly into the mixing plenum. The outlet coolant from the first core segment is mixed with the bypass coolant resulting in a lower inlet temperature to the lower core segment.

  2. High Energy Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title: Professor - ResearchAdministration |High

  3. High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title: Professor -| Argonne Leadership. H LHPC High

  4. High School Science Bowl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title: Professor -| ArgonneSchedule January 23,High

  5. High Explosives Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-DoseOptionsthroughput spectrometerEnergy PhysicsHigh

  6. High speed transient sampler

    DOE Patents [OSTI]

    McEwan, T.E.

    1995-11-28

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing. 17 figs.

  7. High temperature thermometric phosphors

    DOE Patents [OSTI]

    Allison, Stephen W. (Knoxville, TN); Cates, Michael R. (Oak Ridge, TN); Boatner, Lynn A. (Oak Ridge, TN); Gillies, George T. (Earlysville, VA)

    1999-03-23

    A high temperature phosphor consists essentially of a material having the general formula LuPO.sub.4 :Dy.sub.(x),Eu.sub.y) wherein: 0.1 wt %.ltoreq.x.ltoreq.20 wt % and 0.1 wt %.ltoreq.y.ltoreq.20 wt %. The high temperature phosphor is in contact with an article whose temperature is to be determined. The article having the phosphor in contact with it is placed in the environment for which the temperature of the article is to be determined. The phosphor is excited by a laser causing the phosphor to fluoresce. The emission from the phosphor is optically focused into a beam-splitting mirror which separates the emission into two separate emissions, the emission caused by the dysprosium dopant and the emission caused by the europium dopent. The separated emissions are optically filtered and the intensities of the emission are detected and measured. The ratio of the intensity of each emission is determined and the temperature of the article is calculated from the ratio of the intensities of the separate emissions.

  8. High speed transient sampler

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1995-01-01

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing.

  9. High Performance Buildings Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

  10. High temperature thermometric phosphors

    DOE Patents [OSTI]

    Allison, S.W.; Cates, M.R.; Boatner, L.A.; Gillies, G.T.

    1999-03-23

    A high temperature phosphor consists essentially of a material having the general formula LuPO{sub 4}:Dy{sub x},Eu{sub y} wherein: 0.1 wt % {<=} x {<=} 20 wt % and 0.1 wt % {<=} y {<=} 20 wt %. The high temperature phosphor is in contact with an article whose temperature is to be determined. The article having the phosphor in contact with it is placed in the environment for which the temperature of the article is to be determined. The phosphor is excited by a laser causing the phosphor to fluoresce. The emission from the phosphor is optically focused into a beam-splitting mirror which separates the emission into two separate emissions, the emission caused by the dysprosium dopant and the emission caused by the europium dopant. The separated emissions are optically filtered and the intensities of the emission are detected and measured. The ratio of the intensity of each emission is determined and the temperature of the article is calculated from the ratio of the intensities of the separate emissions. 2 figs.

  11. High throughput optical scanner

    DOE Patents [OSTI]

    Basiji, David A. (Seattle, WA); van den Engh, Gerrit J. (Seattle, WA)

    2001-01-01

    A scanning apparatus is provided to obtain automated, rapid and sensitive scanning of substrate fluorescence, optical density or phosphorescence. The scanner uses a constant path length optical train, which enables the combination of a moving beam for high speed scanning with phase-sensitive detection for noise reduction, comprising a light source, a scanning mirror to receive light from the light source and sweep it across a steering mirror, a steering mirror to receive light from the scanning mirror and reflect it to the substrate, whereby it is swept across the substrate along a scan arc, and a photodetector to receive emitted or scattered light from the substrate, wherein the optical path length from the light source to the photodetector is substantially constant throughout the sweep across the substrate. The optical train can further include a waveguide or mirror to collect emitted or scattered light from the substrate and direct it to the photodetector. For phase-sensitive detection the light source is intensity modulated and the detector is connected to phase-sensitive detection electronics. A scanner using a substrate translator is also provided. For two dimensional imaging the substrate is translated in one dimension while the scanning mirror scans the beam in a second dimension. For a high throughput scanner, stacks of substrates are loaded onto a conveyor belt from a tray feeder.

  12. Particle Diffraction at High Energies

    E-Print Network [OSTI]

    Vladimir A. Petrov

    1998-04-27

    A brief ideological and historical review of problems of high energy diffractive scattering is given.

  13. High Temperature Membrane Working Group

    Broader source: Energy.gov [DOE]

    This presentation provides an overview of the High Temperature Membrane Working Group Meeting in May 2007.

  14. High Power Coax Window

    SciTech Connect (OSTI)

    Neubauer, M. L.; Dudas, A.; Sah, R.; Elliott, T. S.; Rimmer, R. A.; Stirbet, M. S.

    2010-05-23

    A su­per­con­duct­ing RF (SRF) power cou­pler ca­pa­ble of han­dling 500 kW CW RF power is re­quired for pre­sent and fu­ture stor­age rings and linacs. There are over 35 cou­pler de­signs for SRF cav­i­ties rang­ing in fre­quen­cy from 325 to 1500 MHz. Cou­pler win­dows vary from cylin­ders to cones to disks, and RF power cou­plers are lim­it­ed by the abil­i­ty of ce­ram­ic win­dows to with­stand the stress­es due to heat­ing and me­chan­i­cal flex­ure. We pro­pose a novel ro­bust co-ax­i­al SRF cou­pler de­sign which uses com­pressed win­dow tech­nol­o­gy. This tech­nol­o­gy will allow the use of high­ly ther­mal­ly con­duc­tive ma­te­ri­als for cryo­genic win­dows. Using com­pressed win­dow tech­niques on disk co-ax­i­al win­dows will make sig­nif­i­cant im­prove­ments in the power han­dling of SRF cou­plers. We pre­sent the bench test re­sults of two win­dow as­sem­blies back to back, as well as in­di­vid­u­al win­dow VSWR in EIA3.125 coax. A vac­u­um test as­sem­bly was made and the win­dows baked out at 155C. The pro­cess­es used to build win­dows is scal­able to larg­er di­am­e­ter coax and to high­er power lev­els.

  15. High Efficiency, Clean Combustion

    SciTech Connect (OSTI)

    Donald Stanton

    2010-03-31

    Energy use in trucks has been increasing at a faster rate than that of automobiles within the U.S. transportation sector. According to the Energy Information Administration (EIA) Annual Energy Outlook (AEO), a 23% increase in fuel consumption for the U.S. heavy duty truck segment is expected between 2009 to 2020. The heavy duty vehicle oil consumption is projected to grow between 2009 and 2050 while light duty vehicle (LDV) fuel consumption will eventually experience a decrease. By 2050, the oil consumption rate by LDVs is anticipated to decrease below 2009 levels due to CAFE standards and biofuel use. In contrast, the heavy duty oil consumption rate is anticipated to double. The increasing trend in oil consumption for heavy trucks is linked to the vitality, security, and growth of the U.S. economy. An essential part of a stable and vibrant U.S. economy is a productive U.S. trucking industry. Studies have shown that the U.S. gross domestic product (GDP) is strongly correlated to freight transport. Over 90% of all U.S. freight tonnage is transported by diesel power and over 75% is transported by trucks. Given the vital role that the trucking industry plays in the economy, improving the efficiency of the transportation of goods was a central focus of the Cummins High Efficient Clean Combustion (HECC) program. In a commercial vehicle, the diesel engine remains the largest source of fuel efficiency loss, but remains the greatest opportunity for fuel efficiency improvements. In addition to reducing oil consumption and the dependency on foreign oil, this project will mitigate the impact on the environment by meeting US EPA 2010 emissions regulations. Innovation is a key element in sustaining a U.S. trucking industry that is competitive in global markets. Unlike passenger vehicles, the trucking industry cannot simply downsize the vehicle and still transport the freight with improved efficiency. The truck manufacturing and supporting industries are faced with numerous challenges to reduce oil consumption and greenhouse gases, meet stringent emissions regulations, provide customer value, and improve safety. The HECC program successfully reduced engine fuel consumption and greenhouse gases while providing greater customer valve. The US EPA 2010 emissions standard poses a significant challenge for developing clean diesel powertrains that meet the DoE Vehicle Technologies Multi-Year Program Plan (MYPP) for fuel efficiency improvement while remaining affordable. Along with exhaust emissions, an emphasis on heavy duty vehicle fuel efficiency is being driven by increased energy costs as well as the potential regulation of greenhouse gases. An important element of the success of meeting emissions while significantly improving efficiency is leveraging Cummins component technologies such as fuel injection equipment, aftertreatment, turbomahcinery, electronic controls, and combustion systems. Innovation in component technology coupled with system integration is enabling Cummins to move forward with the development of high efficiency clean diesel products with a long term goal of reaching a 55% peak brake thermal efficiency for the engine plus aftertreatment system. The first step in developing high efficiency clean products has been supported by the DoE co-sponsored HECC program. The objectives of the HECC program are: (1) To design and develop advanced diesel engine architectures capable of achieving US EPA 2010 emission regulations while improving the brake thermal efficiency by 10% compared to the baseline (a state of the art 2007 production diesel engine). (2) To design and develop components and subsystems (fuel systems, air handling, controls, etc) to enable construction and development of multi-cylinder engines. (3) To perform an assessment of the commercial viability of the newly developed engine technology. (4) To specify fuel properties conducive to improvements in emissions, reliability, and fuel efficiency for engines using high-efficiency clean combustion (HECC) technologies. To demonstrate the technology is compatible with B2

  16. High Performance Quantum Computing

    E-Print Network [OSTI]

    Simon J. Devitt; William J. Munro; Kae Nemoto

    2008-10-14

    The architecture scalability afforded by recent proposals of a large scale photonic based quantum computer, utilizing the theoretical developments of topological cluster states and the photonic chip, allows us to move on to a discussion of massively scaled Quantum Information Processing (QIP). In this letter we introduce the model for a secure and unsecured topological cluster mainframe. We consider the quantum analogue of High Performance Computing, where a dedicated server farm is utilized by many users to run algorithms and share quantum data. The scaling structure of photonics based topological cluster computing leads to an attractive future for server based QIP, where dedicated mainframes can be constructed and/or expanded to serve an increasingly hungry user base with the ideal resource for individual quantum information processing.

  17. FSU High Energy Physics

    SciTech Connect (OSTI)

    Prosper, Harrison B.; Adams, Todd; Askew, Andrew; Berg, Bernd; Blessing, Susan K.; Okui, Takemichi; Owens, Joseph F.; Reina, Laura; Wahl, Horst D.

    2014-12-01

    The High Energy Physics group at Florida State University (FSU), which was established in 1958, is engaged in the study of the fundamental constituents of matter and the laws by which they interact. The group comprises theoretical and experimental physicists, who sometimes collaborate on projects of mutual interest. The report highlights the main recent achievements of the group. Significant, recent, achievements of the group’s theoretical physicists include progress in making precise predictions in the theory of the Higgs boson and its associated processes, and in the theoretical understanding of mathematical quantities called parton distribution functions that are related to the structure of composite particles such as the proton. These functions are needed to compare data from particle collisions, such as the proton-proton collisions at the CERN Large Hadron Collider (LHC), with theoretical predictions. The report also describes the progress in providing analogous functions for heavy nuclei, which find application in neutrino physics. The report highlights progress in understanding quantum field theory on a lattice of points in space and time (an area of study called lattice field theory), the progress in constructing several theories of potential new physics that can be tested at the LHC, and interesting new ideas in the theory of the inflationary expansion of the very early universe. The focus of the experimental physicists is the Compact Muon Solenoid (CMS) experiment at CERN. The report, however, also includes results from the D0 experiment at Fermilab to which the group made numerous contributions over a period of many years. The experimental group is particularly interested in looking for new physics at the LHC that may provide the necessary insight to extend the standard model (SM) of particle physics. Indeed, the search for new physics is the primary task of contemporary particle physics, one motivated by the need to explain certain facts, such as the non-zero neutrino masses or the overwhelming astrophysical evidence for an invisible form of matter, called dark matter, that has had a marked effect on the evolution of structure in the universe. The report highlights the main, recent, experimental achievements of the experimental group, which include the investigation of properties of the W and Z bosons; the search for new heavy stable charged particles and the search for a proposed property of nature called supersymmetry in proton-proton collisions that yield high energy photons. In addition, we report a few results from a more general search for supersymmetry at the LHC, initiated by the group. The report also highlights the group's significant contributions, both theoretical and experimental, to the 2012 discovery of the Higgs boson and the measurement of its properties.

  18. High Performance Network Monitoring

    SciTech Connect (OSTI)

    Martinez, Jesse E

    2012-08-10

    Network Monitoring requires a substantial use of data and error analysis to overcome issues with clusters. Zenoss and Splunk help to monitor system log messages that are reporting issues about the clusters to monitoring services. Infiniband infrastructure on a number of clusters upgraded to ibmon2. ibmon2 requires different filters to report errors to system administrators. Focus for this summer is to: (1) Implement ibmon2 filters on monitoring boxes to report system errors to system administrators using Zenoss and Splunk; (2) Modify and improve scripts for monitoring and administrative usage; (3) Learn more about networks including services and maintenance for high performance computing systems; and (4) Gain a life experience working with professionals under real world situations. Filters were created to account for clusters running ibmon2 v1.0.0-1 10 Filters currently implemented for ibmon2 using Python. Filters look for threshold of port counters. Over certain counts, filters report errors to on-call system administrators and modifies grid to show local host with issue.

  19. High power connection system

    DOE Patents [OSTI]

    Schaefer, Christopher E. (Warren, OH); Beer, Robert C. (Noblesville, IN); McCall, Mark D. (Youngstown, OH)

    2000-01-01

    A high power connection system adapted for automotive environments which provides environmental and EMI shielding includes a female connector, a male connector, and a panel mount. The female connector includes a female connector base and a snap fitted female connector cover. The male connector includes a male connector base and a snap fitted male connector cover. The female connector base has at least one female power terminal cavity for seatably receiving a respective female power terminal. The male connector base has at least one male power terminal cavity for seatably receiving a respective male power terminal. The female connector is covered by a cover seal and a conductive shroud. A pair of lock arms protrude outward from the front end of the male connector base, pass through the panel mount and interface with a lever of a lever rotatably connected to the shroud to thereby mechanically assist mating of the male and female connectors. Safety terminals in the male and female connectors provide a last-to-connect-first-to-break connection with an HVIL circuit.

  20. Ultra high vacuum broad band high power microwave window

    DOE Patents [OSTI]

    Nguyen-Tuong, Viet (Seaford, VA); Dylla, III, Henry Frederick (Yorktown, VA)

    1997-01-01

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost.

  1. Ultra high vacuum broad band high power microwave window

    DOE Patents [OSTI]

    Nguyen-Tuong, V.; Dylla, H.F. III

    1997-11-04

    An improved high vacuum microwave window has been developed that utilizes high density polyethylene coated on two sides with SiOx, SiNx, or a combination of the two. The resultant low dielectric and low loss tangent window creates a low outgassing, low permeation seal through which broad band, high power microwave energy may be passed. No matching device is necessary and the sealing technique is simple. The features of the window are broad band transmission, ultra-high vacuum compatibility with a simple sealing technique, low voltage standing wave ratio, high power transmission and low cost. 5 figs.

  2. A Highly Linear Broadband LNA 

    E-Print Network [OSTI]

    Park, Joung Won

    2010-10-12

    , and Temperature (PVT) variations and increase high power input capability. After analyzing and designing a resistive feedback LNA, novel linearization methods were applied. A highly linear broadband LNA is designed and simulated in 65nm CMOS technology. Simulation...

  3. High intensity femtosecond enhancement cavities

    E-Print Network [OSTI]

    Abram, Gilberto

    2009-01-01

    To produce extreme ultraviolet radiation via high harmonic generation (HHG) in rare gases, light intensities in excess of 1014 W/cm 2 are required. Usually such high intensity are obtained by parametric amplification of ...

  4. High repetition rate fiber lasers

    E-Print Network [OSTI]

    Chen, Jian, Ph. D. Massachusetts Institute of Technology

    2009-01-01

    This thesis reports work in high repetition rate femtosecond fiber lasers. Driven by the applications including optical arbitrary waveform generation, high speed optical sampling, frequency metrology, and timing and frequency ...

  5. High Performance Computing contributions to

    E-Print Network [OSTI]

    High Performance Computing contributions to DoD Mission Success 2002 #12;Approved for public/C nanotube in a field emitter configuration #12;HIGH PERFORMANCE COMPUTING contributions tocontributions ­ SECTION 1 INTRODUCTION 1 Introduction 3 Overview of the High Performance Computing Modernization Program 3

  6. Opportunities i2015 Scholarly Opportunities Guide

    E-Print Network [OSTI]

    Sherman, S. Murray

    Marshall Chin, MD, MPH Elbert Huang, MD, MPH Neda Laiteerapong, MD, MS Wei Wei Lee, MD, MPH Monica Peek, MD

  7. Computer modeling approach for microsphere-packed bone scaffold Pallavi Lal, Wei Sun*

    E-Print Network [OSTI]

    Sun, Wei

    bone graft [5,6], for structural and human cellular assessment of scaffolds for bone repair [7 modeling approach for constructing a three-dimensional microsphere-packed bone graft structure is presented packing model to determine the number of microspheres packed in a synthesized bone graft. The pore size

  8. Networking Issues in Wireless Sensor Networks Deepak Ganesan , Alberto Cerpa , Wei Ye , Yan Yu ,

    E-Print Network [OSTI]

    Cerpa, Alberto E.

    autonomously, and in many cases, without access to renewable energy resources. Cost constraints and the need such as climate monitoring in the canopies, sensor nodes may not be able to renew their energy resources. A major specifically, sensor nodes will do local processing to reduce communica- tions, and consequently, energy costs

  9. Self-assembly of functionally gradient nanoparticle structures Jonghyun Park and Wei Lua

    E-Print Network [OSTI]

    Lu, Wei

    on the particle, with superscripts D, R, and E denoting the drag force, random force, and electrostatic force­3 Among a variety of driving forces for self-assembly, electrostatic interaction plays an important role for dipolar hard spheres obtained from Monte Carlo simulations shows the possibility of multiple phases includ

  10. Two-Phase Electrochemical Lithiation in Amorphous Silicon Jiang Wei Wang,,

    E-Print Network [OSTI]

    Zhu, Ting

    87185, United States *S Supporting Information ABSTRACT: Lithium-ion batteries have revolutionized portable electronics and will be a key to electrifying transport vehicles and delivering renewable- generation lithium-ion batteries. Its lithiation has been widely thought to occur through a single

  11. Should genes with missing data be excluded from phylogenetic Wei Jiang a,b,c

    E-Print Network [OSTI]

    Wiens, John J.

    their studies to maximize the number of genes included but minimize the overall amount of missing data. However genes). Detailed analyses suggest that adding incom- plete genes is especially helpful for resolving taxa and genes are deliberately excluded in order to avoid them. For example, the issue of missing data

  12. Classified Comfort Noise Generation for Efficient Voice Transmission Yasheng Qian, Wei-Shou Hsu, Peter Kabal

    E-Print Network [OSTI]

    Kabal, Peter

    ); coded speech and comfort noise at the decoder (bottom). The aim of the Comfort Noise Generator (CNG with a reduced rate relative to active speech. CNG systems do not need to exactly reproduce the background noise waveform. Dif- 225 September 17-21, Pittsburgh, Pennsylvania INTERSPEECH 2006 - ICSLP #12;ferent CNG

  13. Laser direct growth of graphene on silicon substrate Dapeng Wei and Xianfan Xua)

    E-Print Network [OSTI]

    Xu, Xianfan

    will provide a new approach and platform for applications of graphene. VC 2012 American Institute of Physics-dimensional atomic-thick crystal with car- bon atoms packed in a honeycomb lattice, is regarded as one of the most

  14. Sub-Optimal Allocation of Time in Sequential Shih-Wei Wu1,2

    E-Print Network [OSTI]

    Maloney, Laurence T.

    , Laurence T. Maloney1,4 1 Department of Psychology, New York University, New York, New York, United States, 4 Center for Neural Science, New York University, New York, New York, United States of America Abstract The allocation of limited resources such as time or energy is a core problem that organisms face

  15. A FAST MENTAL POKER PROTOCOL TZER-JEN WEI AND LIH-CHUNG WANG

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    a fast and secure mental poker protocol. It is twice as fast as similar protocols, namely Barnett, 27, 28, 29], see [7] for a survey). Barnett-Smart's protocol is proposed in 2003 ([3]). It canGamal-based version. Castellà-Roca's protocol is proposed in 2004 ([7]). It is similar to Barnett-Smart, but faster

  16. Prediction of Influent Flow Rate: Data-Mining Approach Xiupeng Wei1

    E-Print Network [OSTI]

    Kusiak, Andrew

    based on experience and local weather forecasts (Kim et al. 2006). Such estimations, however data-mining applications in weather forecasting, manufacturing, science, and engineering have been on the influent flow rate, which has not been discussed in the literature. Data provided by weather radar

  17. Underwater Networking Research at USC/ISI John Heidemann Wei Ye Jack Wills

    E-Print Network [OSTI]

    Heidemann, John

    , by a hardware donation from Intel Co., and by Chevron Co. through USC Center for Interactive Smart Oilfield

  18. Low-Power Acoustic Modem for Dense Underwater Sensor Jack Wills, Wei Ye, and John Heidemann

    E-Print Network [OSTI]

    Heidemann, John

    )". It is also partly supported by Chevron Co. through the USC Center for Interactive Smart Oilfield Technologies

  19. 16:332:591:01 Optoelectronics I Instructor: Dr. Wei Jiang

    E-Print Network [OSTI]

    Jiang, Wei

    , Fundamentals of Photonics, Wiley-Interscience, 2nd edition (2007), ISBN 0471358320. (primary text) · Pallab Bhattacharya, Semiconductor Optoelectronic Devices, Prentice Hall; 2nd edition (1996), ISBN 0134956567. · Amnon. Additional reference books and research papers will be given throughout the lectures. Some of the research

  20. 16:332:591:01 Optoelectronics I Instructor: Dr. Wei Jiang

    E-Print Network [OSTI]

    Jiang, Wei

    , Fundamentals of Photonics, Wiley-Interscience, 2nd edition (2007), ISBN 0471358320. (primary text) Pallab Bhattacharya, Semiconductor Optoelectronic Devices, Prentice Hall; 2nd edition (1996), ISBN 0134956567. Amnon on class notes, which will be available in pdf version on the class web site. Additional research papers

  1. Update XML Data by Using Graphical Languages Wei Ni and Tok Wang Ling

    E-Print Network [OSTI]

    Ling, Tok Wang

    system (DBMS) vendors have released their new products supporting XML data storing, publishing but also updates on data contents. Brief history of XML updates: XML update is not a new problem. Various been implemented on the base of an object-oriented DBMS. The prototype of the W3C's XML update

  2. Optimal Buffer Management Using Hybrid Systems Wei Zhang and Jianghai Hu

    E-Print Network [OSTI]

    Zhang, Wei

    with some heuristic schemes. I. INTRODUCTION Dynamic buffer management (DBM) is an effective power general DBM problem, where the component to be controlled has multiple power modes. Since different power as a piecewise-constant hybrid system, or more accurately, a multi-rate automata [7]. The DBM problem is thus

  3. Rate dependent finite deformation of magneto-active polymers , Wei Hong*a

    E-Print Network [OSTI]

    Hong, Wei

    , rotation and torsion, or coiling and bending.3-5,12 On the other hand, the particles in anisotropic MAPs13 on different permutation of particle alignments and magnetizations.18 The current paper will focus-22 (the modulus of a MAP increases in the presence of an external magnetic field). In early continuum

  4. Enabling Interoperability and Extensibility of Future SCADA Systems Wei Ye and John Heidemann

    E-Print Network [OSTI]

    Heidemann, John

    the sen- sor coverage. For example, in a SCADA system devel- oped for oil and gas fields, the RTUs- rent RTUs makes it hard to extend the SCADA from one application to another. This position paper argues is based on the application of oil and gas field monitoring, a collabo- rative effort between USC

  5. SPARSE APPROXIMATE INVERSE SMOOTHER FOR MULTIGRID WEI-PAI TANG AND WING LOK WAN

    E-Print Network [OSTI]

    Wan, Justin Wing Lok

    ://www.siam.org/journals/simax/21-4/33934.html Department of Computer Science, University of Waterloo, Waterloo, ON, Canada N2L 3G1 Research Council of Canada, by the Information Technology Research Centre, which is funded by the Province Association (USRA). SCCM Program, Gates Building 2B, Stanford University, Stanford, CA 94305-9025 (wan@ sccm

  6. In-and Out-Dependent Interactions of Iron with Carbon Nanotubes Wei-Xue Li,*,,

    E-Print Network [OSTI]

    Li, Weixue

    Chemistry, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, China ABSTRACT

  7. Thermal Transistor: Heat Flux Switching and Modulating Wei Chung LO1;4

    E-Print Network [OSTI]

    Li, Baowen

    is an efficient heat control device which can act as a heat switch as well as a heat modulator. In this paper, we

  8. Polarization of holographic grating diffraction. II. Tsu-Wei Nee and Soe-Mie F. Nee

    E-Print Network [OSTI]

    Shahriar, Selim

    optical prop- erties of the quinine-doped polymethyl methacrylate (PMMA) substrate are reported in Section

  9. Training Heterogeneous Teams of Robots Keith Sullivan, Ermo Wei, Bill Squires, Drew Wicke, and Sean Luke

    E-Print Network [OSTI]

    Luke, Sean

    -time by a human who iteratively demonstrates a behavior, observes the learned result, and steps in to correct

  10. Metamaterial Perfect Absorber Based Hot Electron Photodetection Wei Li and Jason Valentine*

    E-Print Network [OSTI]

    Simaan, Nabil

    be harnessed in the form of hot electrons for use in photocatalysis, photovoltaics, and photodetectors, and photocatalysis systems. KEYWORDS: Plasmonics, metamaterial perfect absorber, hot electrons, infrared including photo- detection,11-20 photovoltaic devices,21,22 photocatalysis,23-26 and surface imaging.27

  11. Notes on the CRTDH Group Key Agreement Protocol Spyros Magliveras and Wandi Wei

    E-Print Network [OSTI]

    Magliveras, Spyros

    , the distributed schemes help in the uniform distribution of the work-load for key management and eliminate: xkzou@cs.iupui.edu Abstract Group key management (GKM) is one of the primary is- sues for secure group Key Management (GKM), Contributory Group Key Agreement, Chinese Remainder Theorem, Diffie-Hellman Key

  12. A controlled biochemical release device with embedded nanofluidic Haifeng Yang, Wei Hong, and Liang Dong

    E-Print Network [OSTI]

    Hong, Wei

    are made of liquid core-polymer shell nanofibers using co-electrospinning. The mechanism of controlled

  13. Memory Usage Verification for OO Programs Wei-Ngan Chin1,2

    E-Print Network [OSTI]

    Rinard, Martin

    to precisely capture these correlations. C. Hankin and I. Siveroni (Eds.): SAS 2005, LNCS 3672, pp. 70­86, 2005. c Springer-Verlag Berlin Heidelberg 2005 #12;Memory Usage Verification for OO Programs 71 ­ Heap

  14. The conjecture of Wei and Yang on the weight hierarchy of product codes

    E-Print Network [OSTI]

    Magdeburg, Universität

    to thank the Department of Mathematics for his kind hospitality and the Caja de Ahorros de la Inmaculada

  15. Unsupervised DRG Upcoding Detection in Healthcare Databases Wei Luo and Marcus Gallagher

    E-Print Network [OSTI]

    Gallagher, Marcus

    that costs hundreds of millions of dollars in many developed countries. DRG upcoding is typically detected healthcare costs are an imminent issue in many developed countries. Data mining techniques can be used of Information Technology & Electrical Engineering The University of Queensland Brisbane, Australia 4072 Email

  16. Hierarchical DAG Scheduling for Hybrid Distributed Wei Wu, Aurelien Bouteiller, George Bosilca, Mathieu Faverge, Jack Dongarra

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    algebra; heterogeneous architecture I. INTRODUCTION Throughput-oriented architectures, such as GPUs. Based on these concepts and APIs, numerous computational linear algebra routines optimized for GPU integration of these routines into the already complex 1http://top500.org/ ecosystem used to program large

  17. Term Graph Model for Text Classification Wei Wang, Diep Bich Do, and Xuemin Lin

    E-Print Network [OSTI]

    Lin, Xuemin

    classification methods (and text mining methods at large) are based on representing the documents using the tra, text mining has become one of the most popular research areas in data mining, due to the rapid growth and evolution of digital text documents, such as Web pages, office documents, and E-mails. As the demand

  18. Classifying Facial Gestures in Presence of Head Motion Wei-Kai Liao and Isaac Cohen

    E-Print Network [OSTI]

    Cohen, Issac

    -computer interaction. Besides, it has many other potential applications, such as virtual reality and facial animation. After estimating the head pose, the human face is modeled by a collection of face's regions vector machine. Our experiments show that this approach could classify human expressions in interactive

  19. Environmental Modeling for Autonomous Virtual Pedestrians Wei Shao and Demetri Terzopoulos

    E-Print Network [OSTI]

    Terzopoulos, Demetri

    in architecture and urban planning [6,12]. The field of computer graphics, in which virtual human animation has and his or her environment plays a major role in the animation of autonomous virtual humans in synthetic We present a technique for modeling large-scale urban environments for virtual human simulation. Our

  20. Wei Wang, Suparna De, Gilbert Cassar, Klaus Moessner Knowledge Representation in the Internet of Things: Semantic

    E-Print Network [OSTI]

    Wei, Wang

    for interoperating among different systems and applications in the Internet of Things (IoT). However, current work through an IoT service discovery method. Key words: Internet of Things, Knowledge Representation, Ontology of them being connected to the Internet. The IoT will have the intercon- nection of the objects or things

  1. Zhangwen Wei | Center for Gas SeparationsRelevant to Clean Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDidDevelopmentatabout Who Works for NIFYucca Mountain InTechnologies

  2. High Efficiency Integrated Package

    SciTech Connect (OSTI)

    Ibbetson, James

    2013-09-15

    Solid-state lighting based on LEDs has emerged as a superior alternative to inefficient conventional lighting, particularly incandescent. LED lighting can lead to 80 percent energy savings; can last 50,000 hours – 2-50 times longer than most bulbs; and contains no toxic lead or mercury. However, to enable mass adoption, particularly at the consumer level, the cost of LED luminaires must be reduced by an order of magnitude while achieving superior efficiency, light quality and lifetime. To become viable, energy-efficient replacement solutions must deliver system efficacies of ? 100 lumens per watt (LPW) with excellent color rendering (CRI > 85) at a cost that enables payback cycles of two years or less for commercial applications. This development will enable significant site energy savings as it targets commercial and retail lighting applications that are most sensitive to the lifetime operating costs with their extended operating hours per day. If costs are reduced substantially, dramatic energy savings can be realized by replacing incandescent lighting in the residential market as well. In light of these challenges, Cree proposed to develop a multi-chip integrated LED package with an output of > 1000 lumens of warm white light operating at an efficacy of at least 128 LPW with a CRI > 85. This product will serve as the light engine for replacement lamps and luminaires. At the end of the proposed program, this integrated package was to be used in a proof-of-concept lamp prototype to demonstrate the component’s viability in a common form factor. During this project Cree SBTC developed an efficient, compact warm-white LED package with an integrated remote color down-converter. Via a combination of intensive optical, electrical, and thermal optimization, a package design was obtained that met nearly all project goals. This package emitted 1295 lm under instant-on, room-temperature testing conditions, with an efficacy of 128.4 lm/W at a color temperature of ~2873K and 83 CRI. As such, the package’s performance exceeds DOE’s warm-white phosphor LED efficacy target for 2013. At the end of the program, we assembled an A19 sized demonstration bulb housing the integrated package which met Energy Star intensity variation requirements. With further development to reduce overall component cost, we anticipate that an integrated remote converter package such as developed during this program will find application in compact, high-efficacy LED-based lamps, particularly those requiring omnidirectional emission.

  3. High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation

    E-Print Network [OSTI]

    High Volume Test Automation 1 High Volume Test AutomationHigh Volume Test Automation Keynote Automation 2 AcknowledgementsAcknowledgements · Many of the ideas in this presentation were initially jointly developed with Doug Hoffman,as we developed a course on test automation architecture, and in the Los Altos

  4. Highlighting High Performance: Whitman Hanson Regional High School; Whitman, Massachusetts

    SciTech Connect (OSTI)

    Not Available

    2006-06-01

    This brochure describes the key high-performance building features of the Whitman-Hanson Regional High School. The brochure was paid for by the Massachusetts Technology Collaborative as part of their Green Schools Initiative. High-performance features described are daylighting and energy-efficient lighting, indoor air quality, solar and wind energy, building envelope, heating and cooling systems, water conservation, and acoustics. Energy cost savings are also discussed.

  5. High Temperature, High Pressure Devices for Zonal Isolation in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Pressure Devices for Zonal Isolation in Geothermal Wells track 3: enhanced geothermal systems (EGS) | geothermal 2015 peer review Complete FiberCopper Cable Solution for...

  6. High resolution time interval meter

    DOE Patents [OSTI]

    Martin, A.D.

    1986-05-09

    Method and apparatus are provided for measuring the time interval between two events to a higher resolution than reliability available from conventional circuits and component. An internal clock pulse is provided at a frequency compatible with conventional component operating frequencies for reliable operation. Lumped constant delay circuits are provided for generating outputs at delay intervals corresponding to the desired high resolution. An initiation START pulse is input to generate first high resolution data. A termination STOP pulse is input to generate second high resolution data. Internal counters count at the low frequency internal clock pulse rate between the START and STOP pulses. The first and second high resolution data are logically combined to directly provide high resolution data to one counter and correct the count in the low resolution counter to obtain a high resolution time interval measurement.

  7. Polymer Separators for High Power, High Efficiency Microbial Fuel Cells

    E-Print Network [OSTI]

    1 Polymer Separators for High Power, High Efficiency Microbial Fuel Cells Guang Chen, Bin) was dissolved in 23 g H2O at 90 °C to prepare ~8 wt% transparent viscous polymer solution. To this solution in the water-swollen membranes. MFC reactor construction Anodes were composed of ammonia-treated carbon brushes

  8. HIGHLY COMPRESSED ION BEAMS FOR HIGH ENERGY DENSITY SCIENCE

    E-Print Network [OSTI]

    Wurtele, Jonathan

    HIGHLY COMPRESSED ION BEAMS FOR HIGH ENERGY DENSITY SCIENCE A. Friedman1,2 , J.J.Barnard1,2 , R Energy Density regimes required for Inertial Fu- sion Energy and other applications. An interim goal we are pursuing, low to medium mass ions with energies just above the Bragg peak are directed onto

  9. High field gradient particle accelerator

    DOE Patents [OSTI]

    Nation, John A. (Ithaca, NY); Greenwald, Shlomo (Haifa, IL)

    1989-01-01

    A high electric field gradient electron accelerator utilizing short duration, microwave radiation, and capable of operating at high field gradients for high energy physics applications or at reduced electric field gradients for high average current intermediate energy accelerator applications. Particles are accelerated in a smooth bore, periodic undulating waveguide, wherein the period is so selected that the particles slip an integral number of cycles of the r.f. wave every period of the structure. This phase step of the particles produces substantially continuous acceleration in a traveling wave without transverse magnetic or other guide means for the particle.

  10. High Efficient Natural Gas Technologies

    Broader source: Energy.gov (indexed) [DOE]

    by: Eric Burgis Energy Solutions Center 610-796-1946 eburgis@escenter.org High Efficient Natural Gas Technologies FUPWG 5814 2 Energy Solutions Center Inc. - All Rights...

  11. 2015 High School Team Photos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High-School-Team-Photos- Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects & Initiatives...

  12. Highly Enriched Uranium Materials Facility

    National Nuclear Security Administration (NNSA)

    Appropriations Subcommittee, is shown some of the technology in the Highly Enriched Uranium Materials Facility by Warehousing and Transportation Operations Manager Byron...

  13. High Impact Technology Hub- Results

    Broader source: Energy.gov [DOE]

    Highlights, outcomes and activities to support the adoption of High Impact Technologies.  Technology Highlights preview early results from current technology demonstrations.  Case Studies overview...

  14. High n ballooning modes in highly elongated tokamaks

    SciTech Connect (OSTI)

    An, C.H.; Bateman, G.

    1980-02-01

    An analytic study of stability against high n ballooning modes in highly elongated axisymmetric plasmas is presented and compared with computational results. From the equation for the marginal pressure gradient, it is found that the local shear plays an important role on the stability of elongated and shifted plasma, and that high elongation deteriorates the stability by decreasing the stabilizing effects of field line bending and local shear. The net contribution of the local shear to stability decreases with elongation and shift for strongly ballooning modes (eigenfunctions strongly localized near the outer edge of the toroidal flux surfaces) but increases for interchange modes (eigenfunctions more uniform along the flux surfaces). The computational study of high n ballooning modes in a highly elongated plasma reveals that lowering the aspect ratio and broadening the pressure profile enhance the marginal beta for ..beta../sub p/ less than unity but severely reduce the marginal beta for ..beta../sub p/ larger than unity.

  15. High temperature lightweight foamed cements

    DOE Patents [OSTI]

    Sugama, Toshifumi (Mastic Beach, NY)

    1989-01-01

    Cement slurries are disclosed which are suitable for use in geothermal wells since they can withstand high temperatures and high pressures. The formulation consists of cement, silica flour, water, a retarder, a foaming agent, a foam stabilizer, and a reinforcing agent. A process for producing these cements is also disclosed.

  16. Temperature controlled high voltage regulator

    DOE Patents [OSTI]

    Chiaro, Jr., Peter J. (Clinton, TN); Schulze, Gerald K. (Knoxville, TN)

    2004-04-20

    A temperature controlled high voltage regulator for automatically adjusting the high voltage applied to a radiation detector is described. The regulator is a solid state device that is independent of the attached radiation detector, enabling the regulator to be used by various models of radiation detectors, such as gas flow proportional radiation detectors.

  17. High temperature lightweight foamed cements

    DOE Patents [OSTI]

    Sugama, Toshifumi.

    1989-10-03

    Cement slurries are disclosed which are suitable for use in geothermal wells since they can withstand high temperatures and high pressures. The formulation consists of cement, silica flour, water, a retarder, a foaming agent, a foam stabilizer, and a reinforcing agent. A process for producing these cements is also disclosed. 3 figs.

  18. Astronomy 117 High Energy Astrophysics

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Astronomy 117 High Energy Astrophysics Instructor: David A. Williams (office NS2 319, phone 459-3032, e-mail: daw@scipp.ucsc.edu) Place: Earth & Marine Sciences, B210 Time: Mondays, Wednesdays is · High Energy Astrophysics, second edition, volumes 1 and 2, by Malcolm S. Longair Course materials

  19. High-Tech Means High-Efficiency: The Business Case for Energy Management in High-Tech Industries

    E-Print Network [OSTI]

    Shamshoian, Gary; Blazek, Michele; Naughton, Phil; Seese, Robert S.; Mills, Evan; Tschudi, William

    2005-01-01

    Comparative Energy Costs High-Tech Facilities vs. Standardof energy costs for high-tech buildings and conventionalSurvey (1999 values). High-Tech buildings from LBNL

  20. http://hpc.sagepub.com/ Computing Applications

    E-Print Network [OSTI]

    : 144International Journal of High Performance Computing Applications Wei-keng Liao, Kenin Coloma, Alok://www.sagepublications.com can be found at:International Journal of High Performance Computing ApplicationsAdditional services of High Performance Computing Applications, Volume 21, No. 2, Summer 2007, pp. 144­154 DOI: 10

  1. High field, high efficiency terahertz pulse generation by optical rectification

    E-Print Network [OSTI]

    Huang, Wenqian Ronny

    2014-01-01

    The great difficulty of producing high intensity radiation in the terahertz (THz) spectral region by conventional electronics has stimulated interest in development of sources based on photonics. Optical rectification in ...

  2. Viscosities of natural gases at high pressures and high temperatures 

    E-Print Network [OSTI]

    Viswanathan, Anup

    2007-09-17

    Estimation of viscosities of naturally occurring petroleum gases provides the information needed to accurately work out reservoir-engineering problems. Existing models for viscosity prediction are limited by data, especially at high pressures...

  3. High frequency and high dynamic range continuous time filters 

    E-Print Network [OSTI]

    Lewinski Komincz, Artur Juliusz

    2007-09-17

    Many modern communication systems use orthogonal frequency division multiplexing (OFDM) and discrete multi-tone (DMT) as modulation schemes where high data rates are transmitted over a wide frequency band in multiple orthogonal subcarriers. Due...

  4. Design of high temperature high speed electromagnetic axial thrust bearing 

    E-Print Network [OSTI]

    Mohiuddin, Mohammad Waqar

    2002-01-01

    The National Aeronautics and Space Administration (NASA) is researching the magnetic bearings to use it as a better alternative to conventional bearings. This research was to develop an axial thrust electromagnetic bearing for high performance jet...

  5. High-Rate, High-Capacity Binder-Free Electrode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    that this process could be employed for any high-volume expansion material. * Volumetric capacity at 1C is 2000 mAhcm 3 (3 x graphite). Commercial Fe 3 O 4 material works...

  6. Symmetric Active/Active HighSymmetric Active/Active High Availability for HighAvailability for High--PerformancePerformance

    E-Print Network [OSTI]

    Engelmann, Christian

    Symmetric Active/Active HighSymmetric Active/Active High Availability for HighAvailability for High reliability and availability is deceasing rapidlyHPC system reliability and availability is deceasing rapidly memory)bit errors in ECC memory) High availability as well as high performance isHigh availability

  7. high

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual ConferenceFallHemmert Scalableheu |

  8. high

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual ConferenceFallHemmert Scalableheu |Highlights

  9. high

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th Annual ConferenceFallHemmert Scalableheu |HighlightsSummary

  10. High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-DoseOptions

  11. High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-DoseOptionsthroughput spectrometer for fast localized

  12. High

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-DoseOptionsthroughput spectrometer for fast

  13. HIGH

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry NaturalPrices1Markets See full Genealogy ofFederal Offshore

  14. High-Performance Nanostructured Coating

    Office of Energy Efficiency and Renewable Energy (EERE)

    The High-Performance Nanostructured Coating fact sheet details a SunShot project led by a University of California, San Diego research team working to develop a new high-temperature spectrally selective coating for receiver surfaces. These receiver surfaces, used in concentrating solar power systems, rely on high-temperature SSCs to effectively absorb solar energy without emitting much blackbody radiation.The optical properties of the SSC directly determine the efficiency and maximum attainable temperature of solar receivers, which in turn influence the power-conversion efficiency and overall system cost.

  15. High-tech buildings - Market transformation project

    E-Print Network [OSTI]

    Applications Team

    2001-01-01

    Energy Benchmarking in High-Tech and Biotech Industries,”Recommendations for future high-tech facilities energyLBNL. Task Three-High-Tech Buildings Market Transformation

  16. High Impact Technology Catalyst: Technology Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Impact Technology Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact...

  17. Computational biology and high performance computing

    E-Print Network [OSTI]

    Shoichet, Brian

    2011-01-01

    Biology and High Performance Computing Manfred Zorn, TeresaBiology and High Performance Computing Presenters: Manfred99-Portland High performance computing has become one of the

  18. Philosophy 26 High Temperature Superconductivity

    E-Print Network [OSTI]

    Callender, Craig

    Philosophy 26 High Temperature Superconductivity By Ohm's Law, resistance will dim. Low temperature superconductivity was discovered in 1911 by Heike was explained by BCS theory. BCS theory explains superconductivity microscopically

  19. UESC and High Tech Facilities

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—about the Federal Energy Management Program's (FEMP's) High-Tech Building Utility Energy Service Contract (UESC) Partnership led by the Lawrence Berkeley National Laboratory (LBNL).

  20. High-Level Waste Requirements

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    The guide provides the criteria for determining which DOE radioactive wastes are to be managed as high-level waste in accordance with DOE M 435.1-1.

  1. Modeling high-genus surfaces 

    E-Print Network [OSTI]

    Srinivasan, Vinod

    2004-09-30

    The goal of this research is to develop new, interactive methods for creating very high genus 2-manifold meshes. The various approaches investigated in this research can be categorized into two groups -- interactive methods, ...

  2. High Flux Ti Nanofiltration Membrane

    Broader source: Energy.gov (indexed) [DOE]

    heat exchangers. Success would lead to a US-manufactured high performance nano-ceramic coating that could be exported and contribute to the growth of the US manufacturing sector of...

  3. High compression rate text summarization

    E-Print Network [OSTI]

    Branavan, Satchuthananthavale Rasiah Kuhan

    2008-01-01

    This thesis focuses on methods for condensing large documents into highly concise summaries, achieving compression rates on par with human writers. While the need for such summaries in the current age of information overload ...

  4. Contesting citizenship : race, gender, and the politics of participation in the U.S. and Japanese welfare states, 1962-1982

    E-Print Network [OSTI]

    Tsuchiya, Kazuyo

    2008-01-01

    issues like k?gai (environmental pollution), prices, and welfare --- exercised a huge influence on both national and local politics.issues such as k?gai (environmental pollution), prices, and welfare, had a great impact on both national and local politics.

  5. UTS:LIBRARY 1208/UTS:CRICOS CODE 00099F Seminar and Training Rooms

    E-Print Network [OSTI]

    University of Technology, Sydney

    UTS:LIBRARY 1208/UTS:CRICOS CODE 00099F Seminar and Training Rooms CONTRACT WWW.LIB.UTS.EDU.AU UTS LIBRARY: FACILITIES 1. This Contract must be signed and returned to Corporate Services at the Blake Library (City Campus) or to the Kuring- gai Library Manager at the George Muir Library (Kuring-gai Campus

  6. High resolution, high rate x-ray spectrometer

    DOE Patents [OSTI]

    Goulding, F.S.; Landis, D.A.

    1983-07-14

    It is an object of the invention to provide a pulse processing system for use with detected signals of a wide dynamic range which is capable of very high counting rates, with high throughput, with excellent energy resolution and a high signal-to-noise ratio. It is a further object to provide a pulse processing system wherein the fast channel resolving time is quite short and substantially independent of the energy of the detected signals. Another object is to provide a pulse processing system having a pile-up rejector circuit which will allow the maximum number of non-interfering pulses to be passed to the output. It is also an object of the invention to provide new methods for generating substantially symmetrically triangular pulses for use in both the main and fast channels of a pulse processing system.

  7. High Reliability, High TemperatureThermoelectric Power Generation Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High HIGH PERFORMANCE and1Highand

  8. Encapsulation of High Temperature Thermoelectric Modules | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Encapsulation of High Temperature Thermoelectric Modules Encapsulation of High Temperature Thermoelectric Modules Presents concept for hermetic encapsulation of TE modules...

  9. High Burnup Fuel Behavior Modeling

    SciTech Connect (OSTI)

    Jahingir, M.; Rand, R.; Stachowski, R.; Miles, B.; Kusagaya, K.

    2007-07-01

    This paper discusses the development and qualification of the PRIME03 code to address high burnup mechanisms and to improve uranium utilization in current and new reactor designs. Materials properties and behavioral models have been updated from previous thermal-mechanical codes to reflect the effects of burnup on fuel pellet thermal conductivity, Zircaloy creep, fuel pellet relocation, and fission gas release. These new models are based on results of in-pool and post irradiation examination (PIE) of commercial boiling water reactor (BWR) fuel rods at high burnup and results from international experimental programs. The new models incorporated into PRIME03 also address specific high burnup effects associated with formation of pellet rim porosity at high exposure. The PRIME03 code is qualified by comparison of predicted and measured fuel performance parameters for a large number of high, low, and moderate burnup test and commercial reactor rod. The extensive experimental qualification of the PRIME03 prediction capabilities confirms that it is a reliable best-estimate predictor of fuel rod thermal-mechanical performance over a wide range of design and operating conditions. (authors)

  10. High resolution digital delay timer

    DOE Patents [OSTI]

    Martin, Albert D. (Los Alamos, NM)

    1988-01-01

    Method and apparatus are provided for generating an output pulse following a trigger pulse at a time delay interval preset with a resolution which is high relative to a low resolution available from supplied clock pulses. A first lumped constant delay (20) provides a first output signal (24) at predetermined interpolation intervals corresponding to the desired high resolution time interval. Latching circuits (26, 28) latch the high resolution data (24) to form a first synchronizing data set (60). A selected time interval has been preset to internal counters (142, 146, 154) and corrected for circuit propagation delay times having the same order of magnitude as the desired high resolution. Internal system clock pulses (32, 34) count down the counters to generate an internal pulse delayed by an interval which is functionally related to the preset time interval. A second LCD (184) corrects the internal signal with the high resolution time delay. A second internal pulse is then applied to a third LCD (74) to generate a second set of synchronizing data (76) which is complementary with the first set of synchronizing data (60) for presentation to logic circuits (64). The logic circuits (64) further delay the internal output signal (72) to obtain a proper phase relationship of an output signal (80) with the internal pulses (32, 34). The final delayed output signal (80) thereafter enables the output pulse generator (82) to produce the desired output pulse (84) at the preset time delay interval following input of the trigger pulse (10, 12).

  11. Microlaminated high temperature intermetallic composites

    SciTech Connect (OSTI)

    Rowe, R.G.; Skelly, D.W.; Larsen, M. (GE Corporate Research and Development, Schenectady, NY (United States)); Heathcote, J.; Odette, G.R.; Lucas, G.E. (Univ. of California, Santa Barbara, CA (United States). Materials Dept.)

    1994-12-01

    The thrust to weight ratio of aircraft engines is limited by the density and elevated temperature capability of high temperature turbine materials. Single crystal superalloys, which are the current state-of-the-art in high temperature turbine blade materials, have limited potential for further increases in temperature capability. High temperature intermetallics offer the advantage of higher specific strength and higher temperature capability, but lack ductility and fracture toughness below 1,000 C. By compositing these very high temperature intermetallics with ductile metals, toughening may be improved to the point where the composites have applicability in aircraft engine turbine sections. Lamination of ductile metals with continuous intermetallic layers offers one means of producing such composites. Small lamellae thicknesses may have advantages related to intrinsic defect sizes and the effectiveness of ductile reinforcements in load-controlled applications where strength is important. Intermetallic composites will require a refractory metal for toughening because of the need for metal strength at temperatures above 1,100 C. Niobium-base alloys were selected as the toughening layer in this study because of experience with oxidation-resistant niobium alloys with low densities compared to superalloys and the existence of metal-intermetallic systems in equilibrium at high temperatures. Two microlaminated composite systems, Nb[sub 3]Al-Nb and Cr[sub 2]Nb(Cr) were chosen for microstructural and mechanical property evaluation. The choice of systems was partially based upon knowledge of phase relations between the metal and the intermetallic compositions.

  12. PACIFIC HIGHLY MIGR ATORY PEL AGIC FISHERIES pacific highly migratory

    E-Print Network [OSTI]

    the Pacific Ocean, from the tropics to temperate latitudes. Many of these fishes routinely travel great highly migratory species throughout the Pacific Ocean. Some of the fleets are capable of operating across the Pacific as well as in other oceans during a single fishing season. These fleets use larger purse

  13. High Exposure Facility Technical Description

    SciTech Connect (OSTI)

    Carter, Gregory L.; Stithem, Arthur R.; Murphy, Mark K.; Smith, Alex K.

    2008-02-12

    The High Exposure Facility is a collimated high-level gamma irradiator that is located in the basement of the 318 building. It was custom developed by PNNL back in 1982 to meet the needs for high range radiological instrument calibrations and dosimeter irradiations. At the time no commercially available product existed that could create exposure rates up to 20,000 R/h. This document is intended to pass on the design criteria that was employed to create this unique facility, while maintaining compliance with ANSI N543-1974, "General Safety Standard for Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies up to 10 MeV."

  14. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA); Arnold, Don W. (Livermore, CA); Hencken, Kenneth R. (Pleasanton, CA); Schoeniger, Joseph S. (Oakland, CA); Neyer, David W. (Castro Valley, CA)

    2001-01-01

    An electrokinetic high pressure hydraulic pump for manipulating fluids in capillary-based systems. The pump uses electro-osmotic flow to provide a high pressure hydraulic system, having no moving mechanical parts, for pumping and/or compressing fluids, for providing valve means and means for opening and closing valves, for controlling fluid flow rate, and manipulating fluid flow generally and in capillary-based systems (Microsystems), in particular. The compact nature of the inventive high pressure hydraulic pump provides the ability to construct a micro-scale or capillary-based HPLC system that fulfills the desire for small sample quantity, low solvent consumption, improved efficiency, the ability to run samples in parallel, and field portability. Control of pressure and solvent flow rate is achieved by controlling the voltage applied to an electrokinetic pump.

  15. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H.; Rakestraw, David J.; Arnold, Don W.; Hencken, Kenneth R.; Schoeniger, Joseph S.; Neyer, David W.

    2003-06-03

    An electrokinetic high pressure hydraulic pump for manipulating fluids in capillary-based system. The pump uses electro-osmotic flow to provide a high pressure hydraulic system, having no moving mechanical parts, for pumping and/or compressing fluids, for providing valve means and means for opening and closing valves, for controlling fluid flow rate, and manipulating fluid flow generally and in capillary-based systems (microsystems), in particular. The compact nature of the inventive high pressure hydraulic pump provides the ability to construct a micro-scale or capillary-based HPLC system that fulfills the desire for small sample quantity, low solvent consumption, improved efficiency, the ability to run samples in parallel, and field portability. Control of pressure and solvent flow rate is achieved by controlling the voltage applied to an electrokinetic pump.

  16. High pressure liquid level monitor

    DOE Patents [OSTI]

    Bean, Vern E. (Frederick, MD); Long, Frederick G. (Ijamsville, MD)

    1984-01-01

    A liquid level monitor for tracking the level of a coal slurry in a high-pressure vessel including a toroidal-shaped float with magnetically permeable bands thereon disposed within the vessel, two pairs of magnetic field generators and detectors disposed outside the vessel adjacent the top and bottom thereof and magnetically coupled to the magnetically permeable bands on the float, and signal processing circuitry for combining signals from the top and bottom detectors for generating a monotonically increasing analog control signal which is a function of liquid level. The control signal may be utilized to operate high-pressure control valves associated with processes in which the high-pressure vessel is used.

  17. High elastic modulus polymer electrolytes

    DOE Patents [OSTI]

    Balsara, Nitash Pervez; Singh, Mohit; Eitouni, Hany Basam; Gomez, Enrique Daniel

    2013-10-22

    A polymer that combines high ionic conductivity with the structural properties required for Li electrode stability is useful as a solid phase electrolyte for high energy density, high cycle life batteries that do not suffer from failures due to side reactions and dendrite growth on the Li electrodes, and other potential applications. The polymer electrolyte includes a linear block copolymer having a conductive linear polymer block with a molecular weight of at least 5000 Daltons, a structural linear polymer block with an elastic modulus in excess of 1.times.10.sup.7 Pa and an ionic conductivity of at least 1.times.10.sup.-5 Scm.sup.-1. The electrolyte is made under dry conditions to achieve the noted characteristics.

  18. INL High Performance Building Strategy

    SciTech Connect (OSTI)

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design (LEED®) Green Building Rating System (LEED 2009). The document employs a two-level approach for high performance building at INL. The first level identifies the requirements of the Guiding Principles for Sustainable New Construction and Major Renovations, and the second level recommends which credits should be met when LEED Gold certification is required.

  19. High temperature superconductor current leads

    DOE Patents [OSTI]

    Hull, John R. (Hinsdale, IL); Poeppel, Roger B. (Glen Ellyn, IL)

    1995-01-01

    An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

  20. High-Average Power Facilities

    SciTech Connect (OSTI)

    Dowell, David H.; Power, John G.; /Argonne

    2012-09-05

    There has been significant progress in the development of high-power facilities in recent years yet major challenges remain. The task of WG4 was to identify which facilities were capable of addressing the outstanding R&D issues presently preventing high-power operation. To this end, information from each of the facilities represented at the workshop was tabulated and the results are presented herein. A brief description of the major challenges is given, but the detailed elaboration can be found in the other three working group summaries.

  1. High ratio recirculating gas compressor

    DOE Patents [OSTI]

    Weinbrecht, John F. (601 Oakwood Pl., NE., Albuquerque, NM 87123)

    1989-01-01

    A high ratio positive displacement recirculating rotary compressor is disclosed. The compressor includes an integral heat exchanger and recirculation conduits for returning cooled, high pressure discharge gas to the compressor housing to reducing heating of the compressor and enable higher pressure ratios to be sustained. The compressor features a recirculation system which results in continuous and uninterrupted flow of recirculation gas to the compressor with no direct leakage to either the discharge port or the intake port of the compressor, resulting in a capability of higher sustained pressure ratios without overheating of the compressor.

  2. High Performance Photovoltaic Project Overview

    SciTech Connect (OSTI)

    Symko-Davies, M.; McConnell, R.

    2005-01-01

    The High-Performance Photovoltaic (HiPerf PV) Project was initiated by the U.S. Department of Energy to substantially increase the viability of photovoltaics (PV) for cost-competitive applications so that PV can contribute significantly to our energy supply and environment in the 21st century. To accomplish this, the National Center for Photovoltaics (NCPV) directs in-house and subcontracted research in high-performance polycrystalline thin-film and multijunction concentrator devices. In this paper, we describe the recent research accomplishments in the in-house directed efforts and the research efforts under way in the subcontracted area.

  3. Electrokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA)

    2000-01-01

    A compact high pressure hydraulic pump having no moving mechanical parts for converting electric potential to hydraulic force. The electrokinetic pump, which can generate hydraulic pressures greater than 2500 psi, can be employed to compress a fluid, either liquid or gas, and manipulate fluid flow. The pump is particularly useful for capillary-base systems. By combining the electrokinetic pump with a housing having chambers separated by a flexible member, fluid flow, including high pressure fluids, is controlled by the application of an electric potential, that can vary with time.

  4. High energy overcurrent protective device

    DOE Patents [OSTI]

    Praeg, Walter F. (Palos Park, IL)

    1982-01-01

    Electrical loads connected to capacitance elements in high voltage direct current systems are protected from damage by capacitance discharge overcurrents by connecting between the capacitance element and the load, a longitudinal inductor comprising a bifilar winding wound about a magnetic core, which forms an incomplete magnetic circuit. A diode is connected across a portion of the bifilar winding which conducts a unidirectional current only. Energy discharged from the capacitance element is stored in the inductor and then dissipated in an L-R circuit including the diode and the coil winding. Multiple high voltage circuits having capacitance elements may be connected to loads through bifilar windings all wound about the aforementioned magnetic core.

  5. High ratio recirculating gas compressor

    DOE Patents [OSTI]

    Weinbrecht, J.F.

    1989-08-22

    A high ratio positive displacement recirculating rotary compressor is disclosed. The compressor includes an integral heat exchanger and recirculation conduits for returning cooled, high pressure discharge gas to the compressor housing to reducing heating of the compressor and enable higher pressure ratios to be sustained. The compressor features a recirculation system which results in continuous and uninterrupted flow of recirculation gas to the compressor with no direct leakage to either the discharge port or the intake port of the compressor, resulting in a capability of higher sustained pressure ratios without overheating of the compressor. 10 figs.

  6. High loading uranium fuel plate

    DOE Patents [OSTI]

    Wiencek, Thomas C. (Bolingbrook, IL); Domagala, Robert F. (Indian Head Park, IL); Thresh, Henry R. (Palos Heights, IL)

    1990-01-01

    Two embodiments of a high uranium fuel plate are disclosed which contain a meat comprising structured uranium compound confined between a pair of diffusion bonded ductile metal cladding plates uniformly covering the meat, the meat having a uniform high fuel loading comprising a content of uranium compound greater than about 45 Vol. % at a porosity not greater than about 10 Vol. %. In a first embodiment, the meat is a plurality of parallel wires of uranium compound. In a second embodiment, the meat is a dispersion compact containing uranium compound. The fuel plates are fabricated by a hot isostatic pressing process.

  7. High Performance Factory Built Housing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High Performance Computing DataHigh

  8. Highly Oriented Crystals in Polythiophenes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHigh energyHighland View school HighlandHydrogen andHighly

  9. ACCELERATOR PHYSICS CODE WEB REPOSITORY F. Zimmermann, R. Basset, G. Bellodi, E. Benedetto, U. Dorda, M. Giovannozzi, Y. Papaphilippou,

    E-Print Network [OSTI]

    Sen, Tanaji

    . Franchetti, I. Hofmann, GSI, Germany; S. Machida, RAL, UK; J. Wei, BNL, USA Abstract In the framework. We describe the design, structure and contents of this repository, illustrate its usage, and dis Physics and Synchrotron De- sign" (APD) work package [1] of the CARE [2] network on "High Energy High

  10. High precision redundant robotic manipulator

    DOE Patents [OSTI]

    Young, Kar-Keung David (Mountain View, CA)

    1998-01-01

    A high precision redundant robotic manipulator for overcoming contents imposed by obstacles or imposed by a highly congested work space. One embodiment of the manipulator has four degrees of freedom and another embodiment has seven degreed of freedom. Each of the embodiments utilize a first selective compliant assembly robot arm (SCARA) configuration to provide high stiffness in the vertical plane, a second SCARA configuration to provide high stiffness in the horizontal plane. The seven degree of freedom embodiment also utilizes kinematic redundancy to provide the capability of avoiding obstacles that lie between the base of the manipulator and the end effector or link of the manipulator. These additional three degrees of freedom are added at the wrist link of the manipulator to provide pitch, yaw and roll. The seven degrees of freedom embodiment uses one revolute point per degree of freedom. For each of the revolute joints, a harmonic gear coupled to an electric motor is introduced, and together with properly designed based servo controllers provide an end point repeatability of less than 10 microns.

  11. High precision redundant robotic manipulator

    DOE Patents [OSTI]

    Young, K.K.D.

    1998-09-22

    A high precision redundant robotic manipulator for overcoming contents imposed by obstacles or imposed by a highly congested work space is disclosed. One embodiment of the manipulator has four degrees of freedom and another embodiment has seven degrees of freedom. Each of the embodiments utilize a first selective compliant assembly robot arm (SCARA) configuration to provide high stiffness in the vertical plane, a second SCARA configuration to provide high stiffness in the horizontal plane. The seven degree of freedom embodiment also utilizes kinematic redundancy to provide the capability of avoiding obstacles that lie between the base of the manipulator and the end effector or link of the manipulator. These additional three degrees of freedom are added at the wrist link of the manipulator to provide pitch, yaw and roll. The seven degrees of freedom embodiment uses one revolute point per degree of freedom. For each of the revolute joints, a harmonic gear coupled to an electric motor is introduced, and together with properly designed based servo controllers provide an end point repeatability of less than 10 microns. 3 figs.

  12. High-gravity central stars

    E-Print Network [OSTI]

    Thomas Rauch

    2006-07-11

    NLTE spectral analyses of high-gravity central stars by means of state-of-the-art model atmosphere techniques provide information about the precursor AGB stars. The hydrogen-deficient post-AGB stars allow investigations on the intershell matter which is apparently exhibited at the stellar surface. We summarize recent results from imaging, spectroscopy, and spectropolarimetry.

  13. FINAL REPORT A HIGH SEASONAL

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    #12;'I MTI 79TR68 FINAL REPORT A HIGH SEASONAL PERFORMANCE FACTOR GAS HEAT PUMP FOR THE NORTH Model Gas Heat Pump ......... 11-4 11.4 CNG Typical Weather Year Selection Method. . . . 11-5 11 of the subject gas-fueled heat pump under development in comparison with other equipment which

  14. HIGH TEMPERATURE GEOTHERMAL RESERVOIR ENGINEERING

    E-Print Network [OSTI]

    Schroeder, R.C.

    2009-01-01

    on the Cerro P r i e t o Geothermal F i e l d , Mexicali,e C e r r o P r i e t o Geothermal F i e l d , Baja C a l i1979 HIGH TEMPERATURE GEOTHERMAL RESERVOIR ENGINEERING R.

  15. High-spin nuclear spectroscopy

    SciTech Connect (OSTI)

    Diamond, R.M.

    1986-07-01

    High-spin spectroscopy is the study of the changes in nuclear structure, properties, and behavior with increasing angular momentum. It involves the complex interplay between collective and single-particle motion, between shape and deformation changes, particle alignments, and changes in the pairing correlations. A review of progress in theory, experimentation, and instrumentation in this field is given. (DWL)

  16. Removing High Explosives from Groundwater

    Broader source: Energy.gov [DOE]

    LOS ALAMOS, N.M. – In an initiative supported by EM, Los Alamos National Laboratory’s Corrective Actions Program is addressing high explosive contamination in surface water and groundwater at a location this summer in the forests surrounding the laboratory.

  17. High Performance Outdoor Lighting Accelerator

    Broader source: Energy.gov [DOE]

    Hosted by the U.S. Department of Energy (DOE)’s Weatherization and Intergovernmental Programs Office (WIPO), this webinar covered the expansion of the Better Buildings platform to include the newest initiative for the public sector: the High Performance Outdoor Lighting Accelerator (HPOLA).

  18. High Performance Bulk Thermoelectric Materials

    SciTech Connect (OSTI)

    Ren, Zhifeng

    2013-03-31

    Over 13 plus years, we have carried out research on electron pairing symmetry of superconductors, growth and their field emission property studies on carbon nanotubes and semiconducting nanowires, high performance thermoelectric materials and other interesting materials. As a result of the research, we have published 104 papers, have educated six undergraduate students, twenty graduate students, nine postdocs, nine visitors, and one technician.

  19. High-efficiency photovoltaic cells

    DOE Patents [OSTI]

    Yang, H.T.; Zehr, S.W.

    1982-06-21

    High efficiency solar converters comprised of a two cell, non-lattice matched, monolithic stacked semiconductor configuration using optimum pairs of cells having bandgaps in the range 1.6 to 1.7 eV and 0.95 to 1.1 eV, and a method of fabrication thereof, are disclosed. The high band gap subcells are fabricated using metal organic chemical vapor deposition (MOCVD), liquid phase epitaxy (LPE) or molecular beam epitaxy (MBE) to produce the required AlGaAs layers of optimized composition, thickness and doping to produce high performance, heteroface homojunction devices. The low bandgap subcells are similarly fabricated from AlGa(As)Sb compositions by LPE, MBE or MOCVD. These subcells are then coupled to form a monolithic structure by an appropriate bonding technique which also forms the required transparent intercell ohmic contact (IOC) between the two subcells. Improved ohmic contacts to the high bandgap semiconductor structure can be formed by vacuum evaporating to suitable metal or semiconductor materials which react during laser annealing to form a low bandgap semiconductor which provides a low contact resistance structure.

  20. High temperature turbine engine structure

    DOE Patents [OSTI]

    Boyd, Gary L. (Tempe, AZ)

    1990-01-01

    A high temperature turbine engine includes a hybrid ceramic/metallic rotor member having ceramic/metal joint structure. The disclosed joint is able to endure higher temperatures than previously possible, and aids in controlling heat transfer in the rotor member.

  1. High temperature turbine engine structure

    DOE Patents [OSTI]

    Boyd, Gary L. (Tempe, AZ)

    1991-01-01

    A high temperature turbine engine includes a rotor portion having axially stacked adjacent ceramic rotor parts. A ceramic/ceramic joint structure transmits torque between the rotor parts while maintaining coaxial alignment and axially spaced mutually parallel relation thereof despite thermal and centrifugal cycling.

  2. sessions II and High School

    E-Print Network [OSTI]

    Walker, Lawrence R.

    /high school certification. 20 Upper Division Biology Credits 06/12 MATH 95 Introductory Algebra Math Placement Testing ACT MATH 96 Intermediate Algebra Math Placement Testing ACT 20 SAT 500 MPT 12 UNLV; MATH 127 Precalculus I Math Placement Testing ACT 25 SAT 560 MPT 26 MATH 181 Calculus I Math Placement

  3. High-sensitivity, high-speed continuous imaging system

    DOE Patents [OSTI]

    Watson, Scott A; Bender, III, Howard A

    2014-11-18

    A continuous imaging system for recording low levels of light typically extending over small distances with high-frame rates and with a large number of frames is described. Photodiode pixels disposed in an array having a chosen geometry, each pixel having a dedicated amplifier, analog-to-digital convertor, and memory, provide parallel operation of the system. When combined with a plurality of scintillators responsive to a selected source of radiation, in a scintillator array, the light from each scintillator being directed to a single corresponding photodiode in close proximity or lens-coupled thereto, embodiments of the present imaging system may provide images of x-ray, gamma ray, proton, and neutron sources with high efficiency.

  4. High performance internal reforming unit for high temperature fuel cells

    DOE Patents [OSTI]

    Ma, Zhiwen (Sandy Hook, CT); Venkataraman, Ramakrishnan (New Milford, CT); Novacco, Lawrence J. (Brookfield, CT)

    2008-10-07

    A fuel reformer having an enclosure with first and second opposing surfaces, a sidewall connecting the first and second opposing surfaces and an inlet port and an outlet port in the sidewall. A plate assembly supporting a catalyst and baffles are also disposed in the enclosure. A main baffle extends into the enclosure from a point of the sidewall between the inlet and outlet ports. The main baffle cooperates with the enclosure and the plate assembly to establish a path for the flow of fuel gas through the reformer from the inlet port to the outlet port. At least a first directing baffle extends in the enclosure from one of the sidewall and the main baffle and cooperates with the plate assembly and the enclosure to alter the gas flow path. Desired graded catalyst loading pattern has been defined for optimized thermal management for the internal reforming high temperature fuel cells so as to achieve high cell performance.

  5. High Temperature, High Pressure Devices for Zonal Isolation in Geothermal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High HIGHofWaste

  6. High power densities from high-temperature material interactions

    SciTech Connect (OSTI)

    Morris, J.F.

    1981-01-01

    Thermionic energy conversion (TEC) and metallic-fluid heat pipes (MFHPs) offer important and unique advantages in terrestrial and space energy processing. And they are well suited to serve together synergistically. TEC and MFHPs operate through working-fluid vaporization, condensation cycles that accept great thermal power densities at high temperatures. TEC and MFHPs have apparently simple, isolated performance mechanisms that are somewhat similar. And they also have obviously difficult, complected material problems that again are somewhat similar. Intensive investigation reveals that aspects of their operating cycles and material problems tend to merge: high-temperature material effects determine the level and lifetime of performance. Simplified equations verify the preceding statement for TEC and MFHPs. Material properties and interactions exert primary influences on operational effectiveness. And thermophysicochemical stabilities dictate operating temperatures which regulate the thermoemissive currents of TEC and the vaporization flow rates of MFHPs. Major high-temperature material problems of TEC and MFHPs have been solved. These solutions lead to productive, cost-effective applications of current TEC and MFHPs - and point to significant improvements with anticipated technological gains.

  7. 2015 Spring : Highly Distinguished Honors As of: Jun 12, 2015

    E-Print Network [OSTI]

    Kunkle, Tom

    Hunter Highly Distinguished Barry Madeline Regan Highly Distinguished Barth Caitlin Elizabeth Highly Garrett Robert Highly Distinguished Belcher Harlan Lloyd Highly Distinguished Bell Brandi Lakeisha Highly Distinguished Bell Stephen Joseph Highly Distinguished Bello Austin Tyler Highly Distinguished Bennett Meredith

  8. High-temperature-measuring device

    DOE Patents [OSTI]

    Not Available

    1981-01-27

    A temperature measuring device for very high design temperatures (to 2000/sup 0/C) is described. The device comprises a homogenous base structure preferably in the form of a sphere or cylinder. The base structure contains a large number of individual walled cells. The base structure has a decreasing coefficient of elasticity within the temperature range being monitored. A predetermined quantity of inert gas is confined within each cell. The cells are dimensonally stable at the normal working temperature of the device. Increases in gaseous pressure within the cells will permanently deform the cell walls at temperatures within the high temperature range to be measured. Such deformation can be correlated to temperature by calibrating similarly constructed devices under known time and temperature conditions.

  9. High voltage photovoltaic power converter

    DOE Patents [OSTI]

    Haigh, Ronald E. (Arvada, CO); Wojtczuk, Steve (Cambridge, MA); Jacobson, Gerard F. (Livermore, CA); Hagans, Karla G. (Livermore, CA)

    2001-01-01

    An array of independently connected photovoltaic cells on a semi-insulating substrate contains reflective coatings between the cells to enhance efficiency. A uniform, flat top laser beam profile is illuminated upon the array to produce electrical current having high voltage. An essentially wireless system includes a laser energy source being fed through optic fiber and cast upon the photovoltaic cell array to prevent stray electrical signals prior to use of the current from the array. Direct bandgap, single crystal semiconductor materials, such as GaAs, are commonly used in the array. Useful applications of the system include locations where high voltages are provided to confined spaces such as in explosive detonation, accelerators, photo cathodes and medical appliances.

  10. Element Abundances at High Redshifts

    E-Print Network [OSTI]

    Max Pettini

    1999-02-11

    I review measurements of element abundances in different components of the high redshift universe, including the Lyman alpha forest, damped Lyman alpha systems, and Lyman break galaxies. Although progress is being made in all three areas, recent work has also produced some surprises and shown that established ideas about the nature of the damped Lyman alpha systems in particular may be too simplistic. Overall, our knowledge of metal abundances at high z is still very sketchy. Most significantly, there seems to be an order of magnitude shortfall in the comoving density of metals which have been measured up to now compared with those produced by the star formation activity seen in Lyman break galaxies. At least some of the missing metals are likely to be in hot gas in galactic halos and proto-clusters.

  11. High power gas laser amplifier

    DOE Patents [OSTI]

    Leland, Wallace T. (Los Alamos, NM); Stratton, Thomas F. (Los Alamos, NM)

    1981-01-01

    A high power output CO.sub.2 gas laser amplifier having a number of sections, each comprising a plurality of annular pumping chambers spaced around the circumference of a vacuum chamber containing a cold cathode, gridded electron gun. The electron beam from the electron gun ionizes the gas lasing medium in the sections. An input laser beam is split into a plurality of annular beams, each passing through the sections comprising one pumping chamber.

  12. A high energy physics perspective

    SciTech Connect (OSTI)

    Marciano, W.J.

    1997-01-13

    The status of the Standard model and role of symmetry in its development are reviewed. Some outstanding problems are surveyed and possible solutions in the form of additional {open_quotes}Hidden Symmetries {close_quotes} are discussed. Experimental approaches to uncover {open_quotes}New Physics{close_quotes} associated with those symmetries are described with emphasis on high energy colliders. An outlook for the future is given.

  13. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1993-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  14. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1994-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  15. High temperature turbine engine structure

    DOE Patents [OSTI]

    Carruthers, William D. (Mesa, AZ); Boyd, Gary L. (Tempe, AZ)

    1992-01-01

    A high temperature ceramic/metallic turbine engine includes a metallic housing which journals a rotor member of the turbine engine. A ceramic disk-like shroud portion of the engine is supported on the metallic housing portion and maintains a close running clearance with the rotor member. A ceramic spacer assembly maintains the close running clearance of the shroud portion and rotor member despite differential thermal movements between the shroud portion and metallic housing portion.

  16. High-Speed Rail Comes to London

    E-Print Network [OSTI]

    Hall, Sir Peter

    2001-01-01

    of a debate about high-speed rail transportation, spurred byfrom long-haul flight to high-speed rail feeder. Lufthansasecurity problems that high-speed rail travel might help

  17. PRACTICAL NEUTRON DOSIMETRY AT HIGH ENERGIES

    E-Print Network [OSTI]

    McCaslin, J.B.

    2010-01-01

    of High-Energy Accelerators, New York, April, 1957. USAECShielding of High-Energy Accelerators, New York, April 1957.Shielding of High-Energy Accelerators, New York, April 1957.

  18. Army High Performance Computing Research Center

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    Army High Performance Computing Research Center Applying advanced computational science research challenges http://me.stanford.edu/research/centers/ahpcrc #12;Army High Performance Computing challenges http://me.stanford.edu/research/centers/ahpcrc #12;Army High Performance Computing Research

  19. High Performance Computing Meets Experimental Mathematics #

    E-Print Network [OSTI]

    Li, Xiaoye Sherry

    High Performance Computing Meets Experimental Mathematics # David H. Bailey Lawrence Berkeley large, high­performance computer systems. What's more, in these new appli­ cations the computer computation, implemented on high performance computer (HPC) systems. We present these results, in part

  20. Transsaccadic identification of highly similar artificial shapes

    E-Print Network [OSTI]

    Crawford, Doug

    ., & Verfaillie, K. (2009). Transsaccadic identification of highly similar artificial shapes. Journal of Vision, 9Transsaccadic identification of highly similar artificial shapes Laboratory of Experimental on postsaccadic perception do indeed occur. We presented subjects with highly similar artificial shapes, preceded

  1. Proposal for a High Energy Nuclear Database

    E-Print Network [OSTI]

    Brown, David A.; Vogt, Ramona

    2005-01-01

    Proposal for a High Energy Nuclear Database David A. Brown 1it requires the high-energy nuclear physics com- munity’s ?compilations of high-energy nuclear data for applications

  2. Proposal for a High Energy Nuclear Database

    E-Print Network [OSTI]

    Brown, David A.; Vogt, Ramona

    2005-01-01

    Proposal for a High Energy Nuclear Database XML documentsProposal for a High Energy Nuclear Database David A. Brown 1it requires the high-energy nuclear physics com- munity’s ?

  3. High-performance, high-volume fly ash concrete

    SciTech Connect (OSTI)

    2008-01-15

    This booklet offers the construction professional an in-depth description of the use of high-volume fly ash in concrete. Emphasis is placed on the need for increased utilization of coal-fired power plant byproducts in lieu of Portland cement materials to eliminate increased CO{sub 2} emissions during the production of cement. Also addressed is the dramatic increase in concrete performance with the use of 50+ percent fly ash volume. The booklet contains numerous color and black and white photos, charts of test results, mixtures and comparisons, and several HVFA case studies.

  4. High-Temperature-High-Volume Lifting For Enhanced Geothermal Systems

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources Jump to:Hershey,High-Temperature Downhole Tools Jump to:Geothermal

  5. High Temperature, High Voltage Fully Integrated Gate Driver Circuit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High HIGHofWasteDepartment of

  6. High Temperature, High Voltage Fully Integrated Gate Driver Circuit |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing ProgramsDepartment of¡High HIGHofWasteDepartment

  7. High-Rate, High-Capacity Binder-Free Electrode

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D. Title: ProfessorHigh-Pressure MOFOffice of Energy

  8. Design, modeling, fabrication and testing of a piezoelectric microvalve for high pressure, high frequency hydraulic applications

    E-Print Network [OSTI]

    Roberts, David C. (David Christopher)

    2002-01-01

    A piezoelectrically-driven hydraulic amplification microvalve for use in high specific power hydraulic pumping applications was designed, fabricated, and experimentally characterized. High frequency, high force actuation ...

  9. High efficiency, radiation-hard solar cells

    E-Print Network [OSTI]

    Ager III, J.W.; Walukiewicz, W.

    2004-01-01

    Igari, and W. Warta, “Solar Cell Efficiency Tables (Version56326 High efficiency, radiation-hard solar cells Finalprototype high efficiency multijunction (MJ) solar cells use

  10. Building America Webinar: High Performance Space Conditioning...

    Energy Savers [EERE]

    Webinar: High Performance Space Conditioning Systems, Part II - Air Distribution Retrofit Strategies for Affordable Housing Building America Webinar: High Performance Space...

  11. Continuous Processing of High Thermal Conductivity Polyethylene...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Processing of High Thermal Conductivity Polyethylene Fibers and Sheets Continuous Processing of High Thermal Conductivity Polyethylene Fibers and Sheets Massachusetts Institute of...

  12. High performance computing Igal G. Rasin

    E-Print Network [OSTI]

    Adler, Joan

    High performance computing Igal G. Rasin Department of Chemical Engineering, Technion Israel with different parallelization techniques and tools used in high performance computing (HPC). The tutorial

  13. Funding Opportunity: Building America High Performance Housing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Opportunity: Building America High Performance Housing Innovation Funding Opportunity: Building America High Performance Housing Innovation November 19, 2015 - 11:51am Addthis The...

  14. "Tuning" microalgae for high photosynthesis efficiency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Tuning" Microalgae For High Photosynthesis Efficiency "Tuning" microalgae for high photosynthesis efficiency Los Alamos scientist Richard Sayre and his team of researchers have...

  15. HYDROGEN SULFIDE -HIGH TEMPERATURE DRILLING CONTINGENCY PLAN

    E-Print Network [OSTI]

    HYDROGEN SULFIDE - HIGH TEMPERATURE DRILLING CONTINGENCY PLAN OCEAN DRILLING PROGRAM TEXAS A Foundation. ii #12;HYDROGEN SULFIDE-HIGH TEMPERATURE DRILLING CONTINGENCY PLAN OCEAN DRILLING PROGRAM LEG 139

  16. High-Efficiency Solar Cogeneration with Thermophotovoltaic &...

    Office of Environmental Management (EM)

    High-Efficiency Solar Cogeneration with Thermophotovoltaic & Fiber-Optic Daylighting High-Efficiency Solar Cogeneration with Thermophotovoltaic & Fiber-Optic Daylighting Credit:...

  17. Presentation: High Performance Computing Applications | Department...

    Broader source: Energy.gov (indexed) [DOE]

    A briefing to the Secretary's Energy Advisory Board on High Performance Computing Applications delivered by Frederick H. Streitz, Lawrence Livermore National Laboratory. High...

  18. Supplying High-Quality, Raw Biomass

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Supplying High-Quality, Raw Biomass The building blocks to supply high-quality raw biomass start with harvesting and collection practices, product storage and recommendations of...

  19. Acid Doped Membranes for High Temperature PEMFC

    Broader source: Energy.gov [DOE]

    Presentation on Acid Doped Membranes for High Temperature PEMFC to the High Temperature Membrane Working Group, May 25, 2004 in Philadelphia, PA.

  20. High Impact Technology - Request for Information | Department...

    Broader source: Energy.gov (indexed) [DOE]

    View the Request for Information DE-FOA-0001226, "High Impact Commercial Building Technology." BTO has developed the High Impact Technology (HIT) Catalyst, a framework for...

  1. High-Temperature Thermoelectric Materials Characterization for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Temperature Thermoelectric Materials Characterization for Automotive Waste Heat Recovery: Success Stories from the High Temperature Materials Laboratory (HTML) User Program...

  2. High Temperature Thermoelectric Materials Characterization for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Temperature Thermoelectric Materials Characterization for Automotive Waste Heat Recovery: Success Stories from the High Temperature Materials Laboratory (HTML) User Program...

  3. Manufacturing Barriers to High Temperature PEM Commercialization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Barriers to High Temperature PEM Commercialization Manufacturing Barriers to High Temperature PEM Commercialization Presented at the NREL Hydrogen and Fuel Cell Manufacturing R&D...

  4. Advanced High-Temperature, High-Pressure Transport Reactor Gasification

    SciTech Connect (OSTI)

    Michael Swanson; Daniel Laudal

    2008-03-31

    The U.S. Department of Energy (DOE) National Energy Technology Laboratory Office of Coal and Environmental Systems has as its mission to develop advanced gasification-based technologies for affordable, efficient, zero-emission power generation. These advanced power systems, which are expected to produce near-zero pollutants, are an integral part of DOE's Vision 21 Program. DOE has also been developing advanced gasification systems that lower the capital and operating costs of producing syngas for chemical production. A transport reactor has shown potential to be a low-cost syngas producer compared to other gasification systems since its high-throughput-per-unit cross-sectional area reduces capital costs. This work directly supports the Power Systems Development Facility utilizing the KBR transport reactor located at the Southern Company Services Wilsonville, Alabama, site. Over 2800 hours of operation on 11 different coals ranging from bituminous to lignite along with a petroleum coke has been completed to date in the pilot-scale transport reactor development unit (TRDU) at the Energy & Environmental Research Center (EERC). The EERC has established an extensive database on the operation of these various fuels in both air-blown and oxygen-blown modes utilizing a pilot-scale transport reactor gasifier. This database has been useful in determining the effectiveness of design changes on an advanced transport reactor gasifier and for determining the performance of various feedstocks in a transport reactor. The effects of different fuel types on both gasifier performance and the operation of the hot-gas filter system have been determined. It has been demonstrated that corrected fuel gas heating values ranging from 90 to 130 Btu/scf have been achieved in air-blown mode, while heating values up to 230 Btu/scf on a dry basis have been achieved in oxygen-blown mode. Carbon conversions up to 95% have also been obtained and are highly dependent on the oxygen-coal ratio. Higher-reactivity (low-rank) coals appear to perform better in a transport reactor than the less reactive bituminous coals. Factors that affect TRDU product gas quality appear to be coal type, temperature, and air/coal ratios. Testing with a higher-ash, high-moisture, low-rank coal from the Red Hills Mine of the Mississippi Lignite Mining Company has recently been completed. Testing with the lignite coal generated a fuel gas with acceptable heating value and a high carbon conversion, although some drying of the high-moisture lignite was required before coal-feeding problems were resolved. No ash deposition or bed material agglomeration issues were encountered with this fuel. In order to better understand the coal devolatilization and cracking chemistry occurring in the riser of the transport reactor, gas and solid sampling directly from the riser and the filter outlet has been accomplished. This was done using a baseline Powder River Basin subbituminous coal from the Peabody Energy North Antelope Rochelle Mine near Gillette, Wyoming.

  5. High- and low-temperature-stable thermite composition for producing high-pressure, high-velocity gases

    DOE Patents [OSTI]

    Halcomb, Danny L. (Camden, OH); Mohler, Jonathan H. (Spring Valley, OH)

    1990-10-16

    A high- and low-temperature-stable thermite composition for producing high-pressure and high-velocity gases comprises an oxidizable metal, an oxidizing reagent, and a high-temperature-stable gas-producing additive selected from the group consisting of metal carbides and metal nitrides.

  6. High Efficiency Room Air Conditioner

    SciTech Connect (OSTI)

    Bansal, Pradeep

    2015-01-01

    This project was undertaken as a CRADA project between UT-Battelle and Geberal Electric Company and was funded by Department of Energy to design and develop of a high efficiency room air conditioner. A number of novel elements were investigated to improve the energy efficiency of a state-of-the-art WAC with base capacity of 10,000 BTU/h. One of the major modifications was made by downgrading its capacity from 10,000 BTU/hr to 8,000 BTU/hr by replacing the original compressor with a lower capacity (8,000 BTU/hr) but high efficiency compressor having an EER of 9.7 as compared with 9.3 of the original compressor. However, all heat exchangers from the original unit were retained to provide higher EER. The other subsequent major modifications included- (i) the AC fan motor was replaced by a brushless high efficiency ECM motor along with its fan housing, (ii) the capillary tube was replaced with a needle valve to better control the refrigerant flow and refrigerant set points, and (iii) the unit was tested with a drop-in environmentally friendly binary mixture of R32 (90% molar concentration)/R125 (10% molar concentration). The WAC was tested in the environmental chambers at ORNL as per the design rating conditions of AHAM/ASHRAE (Outdoor- 95F and 40%RH, Indoor- 80F, 51.5%RH). All these modifications resulted in enhancing the EER of the WAC by up to 25%.

  7. High-alpha space trucks

    SciTech Connect (OSTI)

    Cook, L.M. [Ball Aerospace and Technology Corp. 1600 Commerce St. MS CO-9 Boulder, Colorado80301 (United States); Ball, J. [McDonnel Douglas Aerospace 5301 Bolsa Ave. MS 13-3 Huntington Beach, California92647 (United States)

    1997-01-01

    Vertically-landing Reusable Launch Vehicles (RLVs) are the best hope of building a true {open_quotes}Space Truck{close_quotes} with current technology. Because they do not require a low angle-of-attack (AOA, or alpha) horizontal landing, they can be designed to operate exclusively at very high angles-of-attack. This offers savings in vehicle dry weight and complexity, which can be traded for significantly heavier payload, more ascent velocity, or extra design margin. The price for abandoning low angle-of-attack flight is reduced crossrange. To quantify the potential weight reduction, a trade study was performed to determine the relationship between a vehicle{close_quote}s maximum crossrange (angle-of-attack) and it{close_quote}s dry weight (payload margin). At the study conclusion, three vertically-landing (VL) vehicles provided multiple points on a payload weight vs. maximum crossrange curve, showing significant payload increases as crossrange is sacrificed. This is primarily the result of being able to simplify the structure, fly a cooler entry trajectory, and be aerodynamically stable through the entire flight. This reduces subsystem requirements and complexity, enhancing reliability. Further benefits are realized in reduced landing propellant requirements and simplifying or eliminating the {open_quotes}rotation{close_quotes} maneuver. This paper also suggests unique operability solutions that adapt high-alpha vehicles to traditional high-crossrange missions such as the polar {open_quotes}once-around{close_quotes} flight, and proposes a small scale drop-test program to prove the subsonic and landing portion of the flight envelope. {copyright} {ital 1997 American Institute of Physics.}

  8. Old Galaxies at High Redshift

    E-Print Network [OSTI]

    James Dunlop

    1997-05-13

    The most passive galaxies at high redshift are unlikely to be identified by either narrow-band emission-line searches, or by Lyman limit searches (both techniques which have been highlighted at this meeting) simply because such selection methods rely on the presence of a strong ultraviolet component. Selection on the basis of extreme radio power has also proved to yield optically active objects with the majority of high-redshift objects studied to date displaying complex elongated optical/UV morphologies, relatively blue optical-ultraviolet continuum colours, and strong emission lines. These features, coupled with the failure to detect any spectral signatures of old stars at $z > 1$, has led to the suggestion that these galaxies are being observed close to or even during a general epoch of formation. However, we have recently demonstrated that radio selection at significantly fainter (mJy) flux densities can be used to identify apparently passively evolving elliptical galaxies at high redshift. Deep Keck spectra have now been obtained for two such objects yielding absorption line redshifts $z \\simeq 1.5$; 53W091 at $z = 1.552$ (Dunlop et al. 1996) and most recently 53W069 at $z = 1.432$. The ultraviolet SEDs of these galaxies indicate minimum ages $> 3$ Gyr while, as stressed in this article, the strength of the reddenning-independent ultraviolet spectral breaks actually indicate a greater minimum age of 5 Gyr for both objects assuming solar metallicity. Since the spectra comprise the integrated light of each galaxy to radii greater than $r_e$, I argue that it is difficult to justify the adoption of significantly super-solar metallicity in interpreting these data. It thus seems hard to escape the conclusion that $\\Omega_0 5$).

  9. High-density fluid compositions

    SciTech Connect (OSTI)

    Sanders, D.C.

    1981-09-29

    Clear, high-density fluids suitable for use as well completion, packing, and perforation media comprise aqueous solutions of zinc bromide and calcium bromide having densities lying in the range of about 14.5 up to about 18.0 pounds per gallon and measured PH's lying in the range of about 3.5 up to about 6.0. Optionally, such fluids may also comprise calcium chloride and/or a soluble film-forming amine-based corrosion inhibitor. Such fluids under conditions of ordinary use exhibit low corrosion rates and have crystallization points lying well below the range of temperatures under which they are used.

  10. High Intensity Polarized Electron Gun

    SciTech Connect (OSTI)

    Redwine, Robert P.

    2012-07-31

    The goal of the project was to investigate the possibility of building a very high intensity polarized electron gun for the Electron-Ion Collider. This development is crucial for the eRHIC project. The gun implements a large area cathode, ring-shaped laser beam and active cathode cooling. A polarized electron gun chamber with a large area cathode and active cathode cooling has been built and tested. A preparation chamber for cathode activation has been built and initial tests have been performed. Major parts for a load-lock chamber, where cathodes are loaded into the vacuum system, have been manufactured.

  11. High flux solar energy transformation

    DOE Patents [OSTI]

    Winston, R.; Gleckman, P.L.; O'Gallagher, J.J.

    1991-04-09

    Disclosed are multi-stage systems for high flux transformation of solar energy allowing for uniform solar intensification by a factor of 60,000 suns or more. Preferred systems employ a focusing mirror as a primary concentrative device and a non-imaging concentrator as a secondary concentrative device with concentrative capacities of primary and secondary stages selected to provide for net solar flux intensification of greater than 2000 over 95 percent of the concentration area. Systems of the invention are readily applied as energy sources for laser pumping and in other photothermal energy utilization processes. 7 figures.

  12. Galactosynthesis Predictions at High Redshift

    E-Print Network [OSTI]

    Ari Buchalter; Raul Jimenez; Marc Kamionkowski

    2001-02-02

    We predict the Tully-Fisher (TF) and surface-brightness--magnitude relation for disk galaxies at z=3 and discuss the origin of these scaling relations and their scatter. We show that the variation of the TF relation with redshift can be a potentially powerful discriminator of galaxy-formation models. In particular, the TF relation at high redshift might be used to break parameter degeneracies among galactosynthesis models at z=0, as well as to constrain the redshift distribution of collapsing dark-matter halos, the star-formation history and baryon fraction in the disk, and the distribution of halo spins.

  13. Electokinetic high pressure hydraulic system

    DOE Patents [OSTI]

    Paul, Phillip H. (Livermore, CA); Rakestraw, David J. (Fremont, CA)

    2000-01-01

    A compact high pressure hydraulic system having no moving parts for converting electric potential to hydraulic force and for manipulating fluids. Electro-osmotic flow is used to provide a valve and means to compress a fluid or gas in a capillary-based system. By electro-osmotically moving an electrolyte between a first position opening communication between a fluid inlet and outlet and a second position closing communication between the fluid inlet and outlet the system can be configured as a valve. The system can also be used to generate forces as large as 2500 psi that can be used to compress a fluid, either a liquid or a gas.

  14. High-energy Cosmic Rays

    E-Print Network [OSTI]

    Thomas K. Gaisser; Todor Stanev

    2005-10-11

    After a brief review of galactic cosmic rays in the GeV to TeV energy range, we describe some current problems of interest for particles of very high energy. Particularly interesting are two features of the spectrum, the `knee' above $10^{15}$ eV and the `ankle' above $10^{18}$ eV. An important question is whether the highest energy particles are of extra-galactic origin and, if so, at what energy the transition occurs. A theme common to all energy ranges is use of nuclear abundances as a tool for understanding the origin of the cosmic radiation.

  15. Ultra high vacuum seal arrangement

    SciTech Connect (OSTI)

    Flaherty, R.

    1981-08-11

    Arrangement for demountably sealing two concentric metallic tubes in an ultra high vacuum system which facilitates remote actuation is claimed. A tubular seal includes integral spaced lips which circumferentially engage the metallic tubes. The lips plastically deform the metallic tubes by mechanical forces resulting from a martensite to austenite transformation of the tubular seal upon application of a predetermined temperature. The sealing force is released upon application of another temperature which causes a transformation from the stronger austenite to the weaker martensite. Use of a dual acting sealing ring and driving ring circumferentially contacting the sealing ring is particularly applicable to sealing larger diameter concentric metallic members.

  16. High throughput protein production screening

    DOE Patents [OSTI]

    Beernink, Peter T. (Walnut Creek, CA); Coleman, Matthew A. (Oakland, CA); Segelke, Brent W. (San Ramon, CA)

    2009-09-08

    Methods, compositions, and kits for the cell-free production and analysis of proteins are provided. The invention allows for the production of proteins from prokaryotic sequences or eukaryotic sequences, including human cDNAs using PCR and IVT methods and detecting the proteins through fluorescence or immunoblot techniques. This invention can be used to identify optimized PCR and WT conditions, codon usages and mutations. The methods are readily automated and can be used for high throughput analysis of protein expression levels, interactions, and functional states.

  17. Changes in high cloud conditions 

    E-Print Network [OSTI]

    Himebrook, Richard Frank

    1974-01-01

    of contrails, while in a more humid environment contrails wi. ll form. ilovis et al. (1970) showed that, over the 0. 68-2. 4p wavelength interval, "naturally" formed ice clouds and a fresh contrail show different signatures (which could be observed... prime cause for a change in the amount of high clouds, the Location of stations with respect to the jet routes was also reviewed. Atlanta, Ceorgia, was selected because it is a ma ~or air Lr r- minal and its upper-air liow advects jet...

  18. High flux solar energy transformation

    DOE Patents [OSTI]

    Winston, Roland (Chicago, IL); Gleckman, Philip L. (Chicago, IL); O'Gallagher, Joseph J. (Flossmoor, IL)

    1991-04-09

    Disclosed are multi-stage systems for high flux transformation of solar energy allowing for uniform solar intensification by a factor of 60,000 suns or more. Preferred systems employ a focusing mirror as a primary concentrative device and a non-imaging concentrator as a secondary concentrative device with concentrative capacities of primary and secondary stages selected to provide for net solar flux intensification of greater than 2000 over 95 percent of the concentration area. Systems of the invention are readily applied as energy sources for laser pumping and in other photothermal energy utilization processes.

  19. Sandia Energy - High Performance Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid youOxygen GenerationTechnologiesEnergyGeoscience HomeGridHigh

  20. High Mesa | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam: Energyarea, CaliforniaHess Retail NaturalAreasHighMesa Jump

  1. High-Efficiency Deflection of High-Energy Protons through Axial...

    Office of Scientific and Technical Information (OSTI)

    High-Efficiency Deflection of High-Energy Protons through Axial Channeling in a Bent Crystal Citation Details In-Document Search Title: High-Efficiency Deflection of High-Energy...

  2. High energy astroparticle physics for high school students

    E-Print Network [OSTI]

    Krause, Maria; Classen, Lew; Holler, Markus; Hütten, Moritz; Raab, Susanne; Rautenberg, Julian; Schulz, Anneli

    2015-01-01

    The questions about the origin and type of cosmic particles are not only fascinating for scientists in astrophysics, but also for young enthusiastic high school students. To familiarize them with research in astroparticle physics, the Pierre Auger Collaboration agreed to make 1% of its data publicly available. The Pierre Auger Observatory investigates cosmic rays at the highest energies and consists of more than 1600 water Cherenkov detectors, located near Malarg\\"{u}e, Argentina. With publicly available data from the experiment, students can perform their own hands-on analysis. In the framework of a so-called Astroparticle Masterclass organized alongside the context of the German outreach network Netzwerk Teilchenwelt, students get a valuable insight into cosmic ray physics and scientific research concepts. We present the project and experiences with students.

  3. Design of High Field Solenoids made of High Temperature Superconductors

    SciTech Connect (OSTI)

    Bartalesi, Antonio; /Pisa U.

    2010-12-01

    This thesis starts from the analytical mechanical analysis of a superconducting solenoid, loaded by self generated Lorentz forces. Also, a finite element model is proposed and verified with the analytical results. To study the anisotropic behavior of a coil made by layers of superconductor and insulation, a finite element meso-mechanic model is proposed and designed. The resulting material properties are then used in the main solenoid analysis. In parallel, design work is performed as well: an existing Insert Test Facility (ITF) is adapted and structurally verified to support a coil made of YBa{sub 2}Cu{sub 3}O{sub 7}, a High Temperature Superconductor (HTS). Finally, a technological winding process was proposed and the required tooling is designed.

  4. High-Temperature High-Efficiency Solar Thermoelectric Generators

    SciTech Connect (OSTI)

    Baranowski, LL; Warren, EL; Toberer, ES

    2014-03-01

    Inspired by recent high-efficiency thermoelectric modules, we consider thermoelectrics for terrestrial applications in concentrated solar thermoelectric generators (STEGs). The STEG is modeled as two subsystems: a TEG, and a solar absorber that efficiently captures the concentrated sunlight and limits radiative losses from the system. The TEG subsystem is modeled using thermoelectric compatibility theory; this model does not constrain the material properties to be constant with temperature. Considering a three-stage TEG based on current record modules, this model suggests that 18% efficiency could be experimentally expected with a temperature gradient of 1000A degrees C to 100A degrees C. Achieving 15% overall STEG efficiency thus requires an absorber efficiency above 85%, and we consider two methods to achieve this: solar-selective absorbers and thermally insulating cavities. When the TEG and absorber subsystem models are combined, we expect that the STEG modeled here could achieve 15% efficiency with optical concentration between 250 and 300 suns.

  5. High-Intensity Proton Accelerator

    SciTech Connect (OSTI)

    Jay L. Hirshfield

    2011-12-27

    Analysis is presented for an eight-cavity proton cyclotron accelerator that could have advantages as compared with other accelerators because of its potentially high acceleration gradient. The high gradient is possible since protons orbit in a sequence of TE111 rotating mode cavities of equally diminishing frequencies with path lengths during acceleration that greatly exceed the cavity lengths. As the cavities operate at sequential harmonics of a basic repetition frequency, phase synchronism can be maintained over a relatively wide injection phase window without undue beam emittance growth. It is shown that use of radial vanes can allow cavity designs with significantly smaller radii, as compared with simple cylindrical cavities. Preliminary beam transport studies show that acceptable extraction and focusing of a proton beam after cyclic motion in this accelerator should be possible. Progress is also reported on design and tests of a four-cavity electron counterpart accelerator for experiments to study effects on beam quality arising from variations injection phase window width. This device is powered by four 500-MW pulsed amplifiers at 1500, 1800, 2100, and 2400 MHz that provide phase synchronous outputs, since they are driven from a with harmonics derived from a phase-locked 300 MHz source.

  6. Magnetic hydrogel with high coercivity

    SciTech Connect (OSTI)

    Sözeri, H.; Alvero?lu, E.; Kurtan, U.; ?enel, M.; Baykal, A.

    2013-08-01

    Highlights: • Polyacrylamide (PAAm) hydrogels containing magnetic BaFe{sub 12}O{sub 19} nanoparticles have been prepared. • Magnetization measurements reveal that hydrogels have hard magnetic properties with high coercivity. • Magnetic nanoparticles makes the gel more homogeneous and do not diffuse out of the gel during water intake. • These gels are useful in applications as wastewater treatment once gels are magnetized before its usage. - Abstract: This study investigates the synthesis and characterization of polyacrylamide (PAAm) hydrogels containing magnetic BaFe{sub 12}O{sub 19} nanoparticles. Structural, electrical, and magnetic characterization of the gels have been performed with X-ray powder diffractometry, scanning electron microscopy, DC conductivity, magnetization and fluorescence spectroscopy techniques. The preparation and characterization of polyacrylamide (PAAm) hydrogels that contain 5 and 10 mg BaFe{sub 12}O{sub 19} (16 and 21 nm diameter) nanoparticles are described herein. It is seen from the fluorescence spectra that, nanoparticles surrounded to pyranine molecules so that some of pyranine molecules could not bound to the polymer strands. Electrical measurements show that presence of nanoparticles make the gel more homogeneous. Magnetization measurements reveal that hydrogels have hard magnetic properties with quite high coercivity of 4.2 kOe, which does not change with swelling. This feature makes these gels useful in applications as wastewater treatment if they are magnetized before use.

  7. Joule heating at high latitudes

    SciTech Connect (OSTI)

    Foster, J.C.; St.-Maurice, J.; Abreu, V.J.

    1983-06-01

    High latitude Joule heating has been calculated from simultaneous observations of the electric field magnitude and the Pedersen conductivity calculated from individual measurements of the ion drift velocity and particle precipitation observed over the lifetime of the AE-C satellite. The data were sorted by latitude, local time, hemisphere, season, and Kp index and separate averages of the electric field magnitude, Pedersen conductivity and Joule heating was prepared. Conductivities produced by an averaged seasonal solar illumination were included with those calculated from the particle precipitation. We found that high-latitude Joule heating occurs in a roughly oval pattern and consists of three distinct heating regions: the dayside cleft, the region of sunward convection at dawn and dusk, and the midnight sector. On the average, heating in the cleft and dawn-dusk regions contributes the largest heat input. There is no apparent difference between hemispheres for similar seasons. Hemisphere averaged Joule heating at equinox amounts to approximately 25 GW for Kp = 1 conditions, 85G GW for Kp = 4, and varies linearly as a function of Kp. The Joule heat input is 50% greater during the summer than during winter primarily due to the increased conductivity caused by solar production.

  8. High pressure ceramic heat exchanger

    DOE Patents [OSTI]

    Harkins, B.D.; Ward, M.E.

    1998-09-22

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present header assembly when used with recuperators reduces the brittle effect of a portion of the ceramic components. Thus, the present header assembly used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present header assembly is comprised of a first ceramic member, a second ceramic member, a strengthening reinforcing member being in spaced relationship to the first ceramic member and the second ceramic member. The header assembly is further comprised of a refractory material disposed in contacting relationship with the first ceramic member, the second ceramic member and the strengthening reinforcing member. The present header assembly provides a high strength load bearing header assembly having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures. 5 figs.

  9. High pressure ceramic heat exchanger

    DOE Patents [OSTI]

    Harkins, Bruce D. (San Diego, CA); Ward, Michael E. (Poway, CA)

    1998-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present header assembly when used with recuperators reduces the brittle effect of a portion of the ceramic components. Thus, the present header assembly used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present header assembly is comprised of a first ceramic member, a second ceramic member, a strengthening reinforcing member being in spaced relationship to the first ceramic member and the second ceramic member. The header assembly is further comprised of a refractory material disposed in contacting relationship with the first ceramic member, the second ceramic member and the strengthening reinforcing member. The present header assembly provides a high strength load bearing header assembly having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  10. High pressure ceramic heat exchanger

    DOE Patents [OSTI]

    Harkins, Bruce D. (San Diego, CA); Ward, Michael E. (Poway, CA)

    1999-01-01

    Many recuperators have components which react to corrosive gases and are used in applications where the donor fluid includes highly corrosive gases. These recuperators have suffered reduced life, increased service or maintenance, and resulted in increased cost. The present header assembly when used with recuperators reduces the brittle effect of a portion of the ceramic components. Thus, the present header assembly used with the present recuperator increases the life, reduces the service and maintenance, and reduces the increased cost associated with corrosive action of components used to manufacture recuperators. The present header assembly is comprised of a first ceramic member, a second ceramic member, a reinforcing member being in spaced relationship to the first ceramic member and the second ceramic member. The header assembly is further comprised of a refractory material disposed in contacting relationship with the first ceramic member, the second ceramic member and the reinforcing member and having a strengthening member wrapped around the refractory material. The present header assembly provides a high strength load bearing header assembly having good thermal cycling characteristics, good resistance to a corrosive environment and good steady state strength at elevated temperatures.

  11. High speed imager test station

    DOE Patents [OSTI]

    Yates, G.J.; Albright, K.L.; Turko, B.T.

    1995-11-14

    A test station enables the performance of a solid state imager (herein called a focal plane array or FPA) to be determined at high image frame rates. A programmable waveform generator is adapted to generate clock pulses at determinable rates for clock light-induced charges from a FPA. The FPA is mounted on an imager header board for placing the imager in operable proximity to level shifters for receiving the clock pulses and outputting pulses effective to clock charge from the pixels forming the FPA. Each of the clock level shifters is driven by leading and trailing edge portions of the clock pulses to reduce power dissipation in the FPA. Analog circuits receive output charge pulses clocked from the FPA pixels. The analog circuits condition the charge pulses to cancel noise in the pulses and to determine and hold a peak value of the charge for digitizing. A high speed digitizer receives the peak signal value and outputs a digital representation of each one of the charge pulses. A video system then displays an image associated with the digital representation of the output charge pulses clocked from the FPA. In one embodiment, the FPA image is formatted to a standard video format for display on conventional video equipment. 12 figs.

  12. High speed imager test station

    DOE Patents [OSTI]

    Yates, George J. (Santa Fe, NM); Albright, Kevin L. (Los Alamos, NM); Turko, Bojan T. (Moraga, CA)

    1995-01-01

    A test station enables the performance of a solid state imager (herein called a focal plane array or FPA) to be determined at high image frame rates. A programmable waveform generator is adapted to generate clock pulses at determinable rates for clock light-induced charges from a FPA. The FPA is mounted on an imager header board for placing the imager in operable proximity to level shifters for receiving the clock pulses and outputting pulses effective to clock charge from the pixels forming the FPA. Each of the clock level shifters is driven by leading and trailing edge portions of the clock pulses to reduce power dissipation in the FPA. Analog circuits receive output charge pulses clocked from the FPA pixels. The analog circuits condition the charge pulses to cancel noise in the pulses and to determine and hold a peak value of the charge for digitizing. A high speed digitizer receives the peak signal value and outputs a digital representation of each one of the charge pulses. A video system then displays an image associated with the digital representation of the output charge pulses clocked from the FPA. In one embodiment, the FPA image is formatted to a standard video format for display on conventional video equipment.

  13. High specific activity silicon-32

    DOE Patents [OSTI]

    Phillips, Dennis R. (Los Alamos, NM); Brzezinski, Mark A. (Santa Barbara, CA)

    1996-01-01

    A process for preparation of silicon-32 is provided and includes contacting an irradiated potassium chloride target, including spallation products from a prior irradiation, with sufficient water, hydrochloric acid or potassium hydroxide to form a solution, filtering the solution, adjusting pH of the solution to from about 5.5 to about 7.5, admixing sufficient molybdate-reagent to the solution to adjust the pH of the solution to about 1.5 and to form a silicon-molybdate complex, contacting the solution including the silicon-molybdate complex with a dextran-based material, washing the dextran-based material to remove residual contaminants such as sodium-22, separating the silicon-molybdate complex from the dextran-based material as another solution, adding sufficient hydrochloric acid and hydrogen peroxide to the solution to prevent reformation of the silicon-molybdate complex and to yield an oxidization state of the molybdate adapted for subsequent separation by an anion exchange material, contacting the solution with an anion exchange material whereby the molybdate is retained by the anion exchange material and the silicon remains in solution, and optionally adding sufficient alkali metal hydroxide to adjust the pH of the solution to about 12 to 13. Additionally, a high specific activity silicon-32 product having a high purity is provided.

  14. High pressure xenon ionization detector

    DOE Patents [OSTI]

    Markey, J.K.

    1989-11-14

    A method is provided for detecting ionization comprising allowing particles that cause ionization to contact high pressure xenon maintained at or near its critical point and measuring the amount of ionization. An apparatus is provided for detecting ionization, the apparatus comprising a vessel containing a ionizable medium, the vessel having an inlet to allow high pressure ionizable medium to enter the vessel, a means to permit particles that cause ionization of the medium to enter the vessel, an anode, a cathode, a grid and a plurality of annular field shaping rings, the field shaping rings being electrically isolated from one another, the anode, cathode, grid and field shaping rings being electrically isolated from one another in order to form an electric field between the cathode and the anode, the electric field originating at the anode and terminating at the cathode, the grid being disposed between the cathode and the anode, the field shaping rings being disposed between the cathode and the grid, the improvement comprising the medium being xenon and the vessel being maintained at a pressure of 50 to 70 atmospheres and a temperature of 0 to 30 C. 2 figs.

  15. High pressure xenon ionization detector

    DOE Patents [OSTI]

    Markey, John K. (New Haven, CT)

    1989-01-01

    A method is provided for detecting ionization comprising allowing particles that cause ionization to contact high pressure xenon maintained at or near its critical point and measuring the amount of ionization. An apparatus is provided for detecting ionization, the apparatus comprising a vessel containing a ionizable medium, the vessel having an inlet to allow high pressure ionizable medium to enter the vessel, a means to permit particles that cause ionization of the medium to enter the vessel, an anode, a cathode, a grid and a plurality of annular field shaping rings, the field shaping rings being electrically isolated from one another, the anode, cathode, grid and field shaping rings being electrically isolated from one another in order to form an electric field between the cathode and the anode, the electric field originating at the anode and terminating at the cathode, the grid being disposed between the cathode and the anode, the field shaping rings being disposed between the cathode and the grid, the improvement comprising the medium being xenon and the vessel being maintained at a pressure of 50 to 70 atmospheres and a temperature of 0.degree. to 30.degree. C.

  16. Faculty of Science Physics and High Technology

    E-Print Network [OSTI]

    interested in applying their training in physics to the high-tech needs of society. www curriculum with courses in business and computer science to make our graduates especially attractive to high-techFaculty of Science Physics and High Technology Physics and High Technology is designed for students

  17. High Concentrated Photovoltaic (CPV) Masafumi Yamaguchi

    E-Print Network [OSTI]

    Canet, Léonie

    High Concentrated Photovoltaic (CPV) Masafumi Yamaguchi Toyota Technological Institute, Nagoya, 468,, other partners #12;Outline 1. Importance of High Performance, Low Cost and Highly Reliable Photovoltaics on Concentrator Photovoltaics (CPV) ; NG-CPV 4. Future Prospects of PV and Summary #12;1. Importance of High

  18. The University of Texas at Austin High Value/High Risk Information Technology Purchase Policy

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    The University of Texas at Austin High Value/High Risk Information Technology Purchase Policy Officer Document Version: Approved Last Edited: 3/7/2011 1 High Value/High Risk Information Technology Original High Value/High Risk Information Technology Purchase Policy 3/4/2011 Converted web page to PDF

  19. March 14, 2007 Towards High Availability for High-Performance Computing System Services

    E-Print Network [OSTI]

    Engelmann, Christian

    March 14, 2007 Towards High Availability for High-Performance Computing System Services: Accomplishments and Limitations 1/42 Towards High Availability for High- Performance Computing System Services The University of Reading, Reading, UK #12;March 14, 2007 Towards High Availability for High

  20. High-Throughput, High-Precision Hot Testing Tool for High-Brightness

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the Bill Financing ToolSustainableSecurityHighDepartment ofLight-Emitting Diode

  1. High Efficiency Engine Technologies Program

    SciTech Connect (OSTI)

    Rich Kruiswyk

    2010-07-13

    Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency in on-engine testing. (2) A compressor technology that demonstrated 1.5% improvement in compressor efficiency on gas stand compared to production available compressors. (3) A power turbine with high efficiency bearing system that demonstrated excellent rotordynamic stability throughout the required speed range, up to 60,000 rpm. (4) A predicted improvement (using engine simulation) in engine thermal efficiency of 7% at the peak torque design point, when combining the technologies developed in this program.

  2. High impact resistant ceramic composite

    DOE Patents [OSTI]

    Derkacy, James A. (Pittsburgh, PA)

    1991-07-16

    A ceramic material and a method of forming a ceramic material which possesses a high impact resistance. The material comprises: (a) a first continuous phase of .beta.-SiC; and (b) a second phase of about 25-40 vol % TiB.sub.2. Al.sub.2 O.sub.3 is preferably used as a densification aid. The material is formed by hot-pressing the mixture at a temperature from greater than about 1800.degree. C. to less than the transition temperature of .beta.-SiC to .alpha.-SiC. The hot-pressing is performed at a pressure of about 2000 psi to about 4000 psi in an inert atmosphere for several hours and results in the formation of a two phase sintered ceramic composite material.

  3. High impact resistant ceramic composite

    DOE Patents [OSTI]

    Derkacy, J.A.

    1991-07-16

    A ceramic material and a method of forming a ceramic material which possesses a high impact resistance are disclosed. The material comprises: (a) a first continuous phase of [beta]-SiC; and (b) a second phase of about 25-40 vol % TiB[sub 2]. Al[sub 2]O[sub 3] is preferably used as a densification aid. The material is formed by hot-pressing the mixture at a temperature from greater than about 1800 C to less than the transition temperature of [beta]-SiC to [alpha]-SiC. The hot-pressing is performed at a pressure of about 2000 psi to about 4000 psi in an inert atmosphere for several hours and results in the formation of a two phase sintered ceramic composite material. 6 figures.

  4. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, Thomas F. (Batavia, IL)

    1989-01-01

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively.

  5. High voltage DC power supply

    DOE Patents [OSTI]

    Droege, T.F.

    1989-12-19

    A high voltage DC power supply having a first series resistor at the output for limiting current in the event of a short-circuited output, a second series resistor for sensing the magnitude of output current, and a voltage divider circuit for providing a source of feedback voltage for use in voltage regulation is disclosed. The voltage divider circuit is coupled to the second series resistor so as to compensate the feedback voltage for a voltage drop across the first series resistor. The power supply also includes a pulse-width modulated control circuit, having dual clock signals, which is responsive to both the feedback voltage and a command voltage, and also includes voltage and current measuring circuits responsive to the feedback voltage and the voltage developed across the second series resistor respectively. 7 figs.

  6. Steam Oxidation at High Pressure

    SciTech Connect (OSTI)

    Holcomb, Gordon R. [NETL; Carney, Casey [URS

    2013-07-19

    A first high pressure test was completed: 293 hr at 267 bar and 670{degrees}C; A parallel 1 bar test was done for comparison; Mass gains were higher for all alloys at 267 bar than at 1 bar; Longer term exposures, over a range of temperatures and pressures, are planned to provide information as to the commercial implications of pressure effects; The planned tests are at a higher combination of temperatures and pressures than in the existing literature. A comparison was made with longer-term literature data: The short term exposures are largely consistent with the longer-term corrosion literature; Ferritic steels--no consistent pressure effect; Austenitic steels--fine grain alloys less able to maintain protective chromia scale as pressure increases; Ni-base alloys--more mass gains above 105 bar than below. Not based on many data points.

  7. Faraday imaging at high temperatures

    DOE Patents [OSTI]

    Hackel, L.A.; Reichert, P.

    1997-03-18

    A Faraday filter rejects background light from self-luminous thermal objects, but transmits laser light at the passband wavelength, thus providing an ultra-narrow optical bandpass filter. The filter preserves images so a camera looking through a Faraday filter at a hot target illuminated by a laser will not see the thermal radiation but will see the laser radiation. Faraday filters are useful for monitoring or inspecting the uranium separator chamber in an atomic vapor laser isotope separation process. Other uses include viewing welds, furnaces, plasma jets, combustion chambers, and other high temperature objects. These filters are can be produced at many discrete wavelengths. A Faraday filter consists of a pair of crossed polarizers on either side of a heated vapor cell mounted inside a solenoid. 3 figs.

  8. Faraday imaging at high temperatures

    DOE Patents [OSTI]

    Hackel, Lloyd A. (Livermore, CA); Reichert, Patrick (Hayward, CA)

    1997-01-01

    A Faraday filter rejects background light from self-luminous thermal objects, but transmits laser light at the passband wavelength, thus providing an ultra-narrow optical bandpass filter. The filter preserves images so a camera looking through a Faraday filter at a hot target illuminated by a laser will not see the thermal radiation but will see the laser radiation. Faraday filters are useful for monitoring or inspecting the uranium separator chamber in an atomic vapor laser isotope separation process. Other uses include viewing welds, furnaces, plasma jets, combustion chambers, and other high temperature objects. These filters are can be produced at many discrete wavelengths. A Faraday filter consists of a pair of crossed polarizers on either side of a heated vapor cell mounted inside a solenoid.

  9. High voltage load resistor array

    DOE Patents [OSTI]

    Lehmann, Monty Ray (Smithfield, VA)

    2005-01-18

    A high voltage resistor comprising an array of a plurality of parallel electrically connected resistor elements each containing a resistive solution, attached at each end thereof to an end plate, and about the circumference of each of the end plates, a corona reduction ring. Each of the resistor elements comprises an insulating tube having an electrode inserted into each end thereof and held in position by one or more hose clamps about the outer periphery of the insulating tube. According to a preferred embodiment, the electrode is fabricated from stainless steel and has a mushroom shape at one end, that inserted into the tube, and a flat end for engagement with the end plates that provides connection of the resistor array and with a load.

  10. Oxides having high energy densities

    DOE Patents [OSTI]

    Ceder, Gerbrand; Kang, Kisuk

    2013-09-10

    Certain disclosed embodiments generally relate to oxide materials having relatively high energy and/or power densities. Various aspects of the embodiments are directed to oxide materials having a structure B.sub.i(M.sub.jY.sub.k)O.sub.2, for example, a structure Li.sub.j(Ni.sub.jY.sub.k)O.sub.2 such as Li(Ni.sub.0.5Mn.sub.0.5)O.sub.2. In this structure, Y represents one or more atoms, each independently selected from the group consisting of alkaline earth metals, transition metals, Group 14 elements, Group 15, or Group 16 elements. In some embodiments, such an oxide material may have an O3 crystal structure, and/or a layered structure such that the oxide comprises a plurality of first, repeating atomic planes comprising Li, and a plurality of second, repeating atomic planes comprising Ni and/or Y.

  11. High speed sampler and demultiplexer

    DOE Patents [OSTI]

    McEwan, T.E.

    1995-12-26

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as ``strobe kickout``. The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition. 16 figs.

  12. High temperature control rod assembly

    DOE Patents [OSTI]

    Vollman, Russell E. (Solana Beach, CA)

    1991-01-01

    A high temperature nuclear control rod assembly comprises a plurality of substantially cylindrical segments flexibly joined together in succession by ball joints. The segments are made of a high temperature graphite or carbon-carbon composite. The segment includes a hollow cylindrical sleeve which has an opening for receiving neutron-absorbing material in the form of pellets or compacted rings. The sleeve has a threaded sleeve bore and outer threaded surface. A cylindrical support post has a threaded shaft at one end which is threadably engaged with the sleeve bore to rigidly couple the support post to the sleeve. The other end of the post is formed with a ball portion. A hollow cylindrical collar has an inner threaded surface engageable with the outer threaded surface of the sleeve to rigidly couple the collar to the sleeve. the collar also has a socket portion which cooperates with the ball portion to flexibly connect segments together to form a ball and socket-type joint. In another embodiment, the segment comprises a support member which has a threaded shaft portion and a ball surface portion. The threaded shaft portion is engageable with an inner threaded surface of a ring for rigidly coupling the support member to the ring. The ring in turn has an outer surface at one end which is threadably engageably with a hollow cylindrical sleeve. The other end of the sleeve is formed with a socket portion for engagement with a ball portion of the support member. In yet another embodiment, a secondary rod is slidably inserted in a hollow channel through the center of the segment to provide additional strength. A method for controlling a nuclear reactor utilizing the control rod assembly is also included.

  13. High speed sampler and demultiplexer

    DOE Patents [OSTI]

    McEwan, Thomas E. (Livermore, CA)

    1995-01-01

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as "strobe kickout". The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition.

  14. Avalanche spin-valve transistor K. J. Russell,a)

    E-Print Network [OSTI]

    Russell, Kasey

    Avalanche spin-valve transistor K. J. Russell,a) Ian Appelbaum,b) Wei Yi, D. J. Monsma, F. Capasso, California 93106 (Received 11 June 2004; accepted 10 September 2004) A spin-valve transistor with a Ga allow fabrication of spin-valve transistors with high gain in a variety of materials. © 2004 American

  15. On-chip methane sensing by near-IR absorption signatures in a photonic crystal slot waveguide

    E-Print Network [OSTI]

    Chen, Ray

    On-chip methane sensing by near-IR absorption signatures in a photonic crystal slot waveguide Wei­Lambert law for the detection of methane gas. The device combines slow light in a PC waveguide with high absorption path length. A methane concentration of 100 ppm (parts per million) in nitrogen was measured

  16. Amphiphilic Surface Modification of Hollow Carbon Nanofibers for Improved Cycle Life of Lithium Sulfur Batteries

    E-Print Network [OSTI]

    Cui, Yi

    Sulfur Batteries Guangyuan Zheng, Qianfan Zhang, Judy J. Cha, Yuan Yang, Weiyang Li, Zhi Wei Seh, and Yi lithium sulfur batteries, due to their high specific energy and relatively low cost. Despite recent progress in addressing the various problems of sulfur cathodes, lithium sulfur batteries still exhibit

  17. Dye-Sensitized Solar Cells DOI: 10.1002/anie.201104786

    E-Print Network [OSTI]

    Lin, Zhiqun

    Dye-Sensitized Solar Cells DOI: 10.1002/anie.201104786 Low-Cost Copper Zinc Tin Sulfide Counter, and Zhiqun Lin* Dye-sensitized solar cells (DSSCs) are among the most promising photovoltaic devices for low-cost Electrodes for High- Efficiency Dye-Sensitized Solar Cells** Xukai Xin, Ming He, Wei Han, Jaehan Jung

  18. Templating Water Stains for Nanolithography

    E-Print Network [OSTI]

    Templating Water Stains for Nanolithography Wei-Ssu Liao, Xin Chen, Jixin Chen, and Paul S. Cremer structures.11-18 For example, photolithography provides a top-down method for creating large areas of well of nearly arbitrary two-dimensional geometry on a scale below 100 nm.12 Despite its high resolution, e

  19. Energy Attacks and Defense Techniques for Wireless Systems

    E-Print Network [OSTI]

    Potkonjak, Miodrag

    Energy Attacks and Defense Techniques for Wireless Systems Sheng Wei Jong Hoon Ahnn Miodrag {shengwei, jhahnn, miodrag}@cs.ucla.edu ABSTRACT This paper addresses the energy attacks towards wireless in the wireless systems and trigger ultra-high energy increases at runtime. Then, we develop a non-destructive HT

  20. 2254 IEEE TRANSACTIONS ON GEOSCIENCE AND REMOTE SENSING, VOL. 42, NO. 10, OCTOBER 2004 Retrieval of Semitransparent Ice Cloud Optical

    E-Print Network [OSTI]

    Li, Jun

    of Semitransparent Ice Cloud Optical Thickness From Atmospheric Infrared Sounder (AIRS) Measurements Heli Wei, Ping Abstract--An approach is developed to infer the optical thick- ness of semitransparent ice clouds (when optical thickness is less than 5) from Atmospheric Infrared Sounder (AIRS) high spectral resolution

  1. Imaging the electromechanical activity of the heart in vivo

    E-Print Network [OSTI]

    Konofagou, Elisa E.

    Imaging the electromechanical activity of the heart in vivo Jean Provosta , Wei-Ning Leea , Kana of the electrical activation. In this paper, electromechanical wave imaging (EWI), a novel ultrasound-based imaging method, is shown to be capable of mapping the electromechanics of all four cardiac chambers at high

  2. Supplementary Material (ESI) for Journal of Materials Chemistry This journal is (c) The Royal Society of Chemistry 2011

    E-Print Network [OSTI]

    Demir, Hilmi Volkan

    Supplementary Material (ESI) for Journal of Materials Chemistry This journal is (c) The Royal Society of Chemistry 2011 Bifunctional Highly Fluorescent Hollow Porous Microspheres Made of BaMoO4:Pr3*b, c, d and Xiao Wei Sun*b, e a Key Lab of Rare Earth Functional Materials, Department of Chemistry

  3. High temperature pressurized high frequency testing rig and test method

    DOE Patents [OSTI]

    De La Cruz, Jose; Lacey, Paul

    2003-04-15

    An apparatus is described which permits the lubricity of fuel compositions at or near temperatures and pressures experienced by compression ignition fuel injector components during operation in a running engine. The apparatus consists of means to apply a measured force between two surfaces and oscillate them at high frequency while wetted with a sample of the fuel composition heated to an operator selected temperature. Provision is made to permit operation at or near the flash point of the fuel compositions. Additionally a method of using the subject apparatus to simulate ASTM Testing Method D6079 is disclosed, said method involving using the disclosed apparatus to contact the faces of prepared workpieces under a measured load, sealing the workface contact point into the disclosed apparatus while immersing said contact point between said workfaces in a lubricating media to be tested, pressurizing and heating the chamber and thereby the fluid and workfaces therewithin, using the disclosed apparatus to impart a differential linear motion between the workpieces at their contact point until a measurable scar is imparted to at least one workpiece workface, and then evaluating the workface scar.

  4. Low Cost, High Efficiency, High Pressure Hydrogen Storage

    SciTech Connect (OSTI)

    Mark Leavitt

    2010-03-31

    A technical and design evaluation was carried out to meet DOE hydrogen fuel targets for 2010. These targets consisted of a system gravimetric capacity of 2.0 kWh/kg, a system volumetric capacity of 1.5 kWh/L and a system cost of $4/kWh. In compressed hydrogen storage systems, the vast majority of the weight and volume is associated with the hydrogen storage tank. In order to meet gravimetric targets for compressed hydrogen tanks, 10,000 psi carbon resin composites were used to provide the high strength required as well as low weight. For the 10,000 psi tanks, carbon fiber is the largest portion of their cost. Quantum Technologies is a tier one hydrogen system supplier for automotive companies around the world. Over the course of the program Quantum focused on development of technology to allow the compressed hydrogen storage tank to meet DOE goals. At the start of the program in 2004 Quantum was supplying systems with a specific energy of 1.1-1.6 kWh/kg, a volumetric capacity of 1.3 kWh/L and a cost of $73/kWh. Based on the inequities between DOE targets and Quantum’s then current capabilities, focus was placed first on cost reduction and second on weight reduction. Both of these were to be accomplished without reduction of the fuel system’s performance or reliability. Three distinct areas were investigated; optimization of composite structures, development of “smart tanks” that could monitor health of tank thus allowing for lower design safety factor, and the development of “Cool Fuel” technology to allow higher density gas to be stored, thus allowing smaller/lower pressure tanks that would hold the required fuel supply. The second phase of the project deals with three additional distinct tasks focusing on composite structure optimization, liner optimization, and metal.

  5. NOvel Refractory Materials for High Alkali, High Temperature Environments

    SciTech Connect (OSTI)

    Hemrick, J.G.; Griffin, R.

    2011-08-30

    Refractory materials can be limited in their application by many factors including chemical reactions between the service environment and the refractory material, mechanical degradation of the refractory material by the service environment, temperature limitations on the use of a particular refractory material, and the inability to install or repair the refractory material in a cost effective manner or while the vessel was in service. The objective of this project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al2O3 spinel or other similar magnesia/alumina containing unshaped refractory composition (castables, gunnables, shotcretes, etc) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, highalkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. A research team was formed to carry out the proposed work led by Oak Ridge National Laboratory (ORNL) and was comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The two goals of this project were to produce novel refractory compositions which will allow for improved energy efficiency and to develop new refractory application techniques which would improve the speed of installation. Also methods of hot installation were sought which would allow for hot repairs and on-line maintenance leading to reduced process downtimes and eliminating the need to cool and reheat process vessels.

  6. High efficiency turbine blade coatings.

    SciTech Connect (OSTI)

    Youchison, Dennis L.; Gallis, Michail A.

    2014-06-01

    The development of advanced thermal barrier coatings (TBCs) of yttria stabilized zirconia (YSZ) that exhibit lower thermal conductivity through better control of electron beam - physical vapor deposition (EB-PVD) processing is of prime interest to both the aerospace and power industries. This report summarizes the work performed under a two-year Lab-Directed Research and Development (LDRD) project (38664) to produce lower thermal conductivity, graded-layer thermal barrier coatings for turbine blades in an effort to increase the efficiency of high temperature gas turbines. This project was sponsored by the Nuclear Fuel Cycle Investment Area. Therefore, particular importance was given to the processing of the large blades required for industrial gas turbines proposed for use in the Brayton cycle of nuclear plants powered by high temperature gas-cooled reactors (HTGRs). During this modest (~1 full-time equivalent (FTE)) project, the processing technology was developed to create graded TBCs by coupling ion beam-assisted deposition (IBAD) with substrate pivoting in the alumina-YSZ system. The Electron Beam - 1200 kW (EB-1200) PVD system was used to deposit a variety of TBC coatings with micron layered microstructures and reduced thermal conductivity below 1.5 W/m.K. The use of IBAD produced fully stoichiometric coatings at a reduced substrate temperature of 600 oC and a reduced oxygen background pressure of 0.1 Pa. IBAD was also used to successfully demonstrate the transitioning of amorphous PVD-deposited alumina to the -phase alumina required as an oxygen diffusion barrier and for good adhesion to the substrate Ni2Al3 bondcoat. This process replaces the time consuming thermally grown oxide formation required before the YSZ deposition. In addition to the process technology, Direct Simulation Monte Carlo plume modeling and spectroscopic characterization of the PVD plumes were performed. The project consisted of five tasks. These included the production of layered periodic microstructures in the coating, the Direct Simulation Monte Carlo (DSMC) modeling of particle transport in the PVD plume, functional graded layer development, the deposition of all layers to form a complete coating, and materials characterization including thermal testing. Ion beam-assisted deposition, beam sharing through advanced digital rastering, substrate pivoting, hearth calorimetry, infrared imaging, fiber optic-enabled optical emission spectroscopy and careful thermal management were used to achieve all the milestones outlined in the FY02 LDRD proposal.

  7. HIGH-PERFORMANCE COATING MATERIALS

    SciTech Connect (OSTI)

    SUGAMA,T.

    2007-01-01

    Corrosion, erosion, oxidation, and fouling by scale deposits impose critical issues in selecting the metal components used at geothermal power plants operating at brine temperatures up to 300 C. Replacing these components is very costly and time consuming. Currently, components made of titanium alloy and stainless steel commonly are employed for dealing with these problems. However, another major consideration in using these metals is not only that they are considerably more expensive than carbon steel, but also the susceptibility of corrosion-preventing passive oxide layers that develop on their outermost surface sites to reactions with brine-induced scales, such as silicate, silica, and calcite. Such reactions lead to the formation of strong interfacial bonds between the scales and oxide layers, causing the accumulation of multiple layers of scales, and the impairment of the plant component's function and efficacy; furthermore, a substantial amount of time is entailed in removing them. This cleaning operation essential for reusing the components is one of the factors causing the increase in the plant's maintenance costs. If inexpensive carbon steel components could be coated and lined with cost-effective high-hydrothermal temperature stable, anti-corrosion, -oxidation, and -fouling materials, this would improve the power plant's economic factors by engendering a considerable reduction in capital investment, and a decrease in the costs of operations and maintenance through optimized maintenance schedules.

  8. High Temperature Superconducting Underground Cable

    SciTech Connect (OSTI)

    Farrell, Roger, A.

    2010-02-28

    The purpose of this Project was to design, build, install and demonstrate the technical feasibility of an underground high temperature superconducting (HTS) power cable installed between two utility substations. In the first phase two HTS cables, 320 m and 30 m in length, were constructed using 1st generation BSCCO wire. The two 34.5 kV, 800 Arms, 48 MVA sections were connected together using a superconducting joint in an underground vault. In the second phase the 30 m BSCCO cable was replaced by one constructed with 2nd generation YBCO wire. 2nd generation wire is needed for commercialization because of inherent cost and performance benefits. Primary objectives of the Project were to build and operate an HTS cable system which demonstrates significant progress towards commercial progress and addresses real world utility concerns such as installation, maintenance, reliability and compatibility with the existing grid. Four key technical areas addressed were the HTS cable and terminations (where the cable connects to the grid), cryogenic refrigeration system, underground cable-to-cable joint (needed for replacement of cable sections) and cost-effective 2nd generation HTS wire. This was the world’s first installation and operation of an HTS cable underground, between two utility substations as well as the first to demonstrate a cable-to-cable joint, remote monitoring system and 2nd generation HTS.

  9. High risk of permafrost thaw

    SciTech Connect (OSTI)

    Schuur, E.A.G.; Abbott, B.; Koven, C.D,; Riley, W.J.; Subin, Z.M.; al, et

    2011-11-01

    In the Arctic, temperatures are rising fast, and permafrost is thawing. Carbon released to the atmosphere from permafrost soils could accelerate climate change, but the likely magnitude of this effect is still highly uncertain. A collective estimate made by a group of permafrost experts, including myself, is that carbon could be released more quickly than models currently suggest, and at levels that are cause for serious concern. While our models of carbon emission from permafrost thaw are lacking, experts intimately familiar with these landscapes and processes have accumulated knowledge about what they expect to happen, based on both quantitative data and qualitative understanding of these systems. We (the authors of this piece) attempted to quantify this expertise through a survey developed over several years, starting in 2009. Our survey asked experts what percentage of surface permafrost they thought was likely to thaw, how much carbon would be released, and how much of that would be methane, for three time periods and under four warming scenarios that are part of the new IPCC Fifth Assessment Report.

  10. High-pressure microhydraulic actuator

    DOE Patents [OSTI]

    Mosier, Bruce P. (San Francisco, CA) [San Francisco, CA; Crocker, Robert W. (Fremont, CA) [Fremont, CA; Patel, Kamlesh D. (Dublin, CA) [Dublin, CA

    2008-06-10

    Electrokinetic ("EK") pumps convert electric to mechanical work when an electric field exerts a body force on ions in the Debye layer of a fluid in a packed bed, which then viscously drags the fluid. Porous silica and polymer monoliths (2.5-mm O.D., and 6-mm to 10-mm length) having a narrow pore size distribution have been developed that are capable of large pressure gradients (250-500 psi/mm) when large electric fields (1000-1500 V/cm) are applied. Flowrates up to 200 .mu.L/min and delivery pressures up to 1200 psi have been demonstrated. Forces up to 5 lb-force at 0.5 mm/s (12 mW) have been demonstrated with a battery-powered DC-DC converter. Hydraulic power of 17 mW (900 psi@ 180 uL/min) has been demonstrated with wall-powered high voltage supplies. The force and stroke delivered by an actuator utilizing an EK pump are shown to exceed the output of solenoids, stepper motors, and DC motors of similar size, despite the low thermodynamic efficiency.

  11. High G MEMS integrated accelerometer

    SciTech Connect (OSTI)

    Davies, B.R.; Barron, C.C.; Montague, S.; Smith, J.H.; Murray, J.R.; Christenson, T.R.; Bateman, V.I.

    1996-12-31

    This paper describes the design and implementation of a surface micromachined accelerometer for measuring very high levels of acceleration (up to 50,000 G). Both the mechanical and electronic portions of the sensor were integrated on a single substrate using a process developed at Sandia National Laboratories. In this process, the mechanical components of the sensor were first fabricated at the bottom of a trench etched into the water substrate. The trench was then filled with oxide and sealed to protect the mechanical components during subsequent microelectronics processing. The wafer surface was then planarized in preparation for CMOS processing using Chemical Mechanical Polishing (CMP). Next, the CMOS electronics were fabricated on areas of the wafer adjacent to the embedded structures. Finally, the mechanical structures were released and the sensor tested. The mechanical structure of the sensor consisted of two polysilicon plate masses suspended by multiple springs (cantilevered beam structures) over corresponding polysilicon plates fixed to the substrate to form two parallel plate capacitors. The first polysilicon plate mass was suspended using compliant springs (cantilever beams) and acted as a variable capacitor during sensor acceleration. The second polysilicon plate mass was suspended using very stiff springs and acted as a fixed capacitor during acceleration. Acceleration was measured by comparing the capacitance of the variable capacitor (compliant suspension) with the fixed capacitance (stiff suspension).

  12. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, K.J.

    1994-07-26

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured. 3 figs.

  13. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, Kenneth J. (Livermore, CA)

    1994-01-01

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured.

  14. Multicolor, High Efficiency, Nanotextured LEDs

    SciTech Connect (OSTI)

    Jung Han; Arto Nurmikko

    2011-09-30

    We report on research results in this project which synergize advanced material science approaches with fundamental optical physics concepts pertaining to light-matter interaction, with the goal of solving seminal problems for the development of very high performance light emitting diodes (LEDs) in the blue and green for Solid State Lighting applications. Accomplishments in the duration of the contract period include (i) heteroepitaxy of nitrogen-polar LEDs on sapphire, (ii) heteroepitaxy of semipolar (11{bar 2}2) green LEDs on sapphire, (iii) synthesis of quantum-dot loaded nanoporous GaN that emits white light without phosphor conversion, (iv) demonstration of the highest quality semipolar (11{bar 2}2) GaN on sapphire using orientation-controlled epitaxy, (v) synthesis of nanoscale GaN and InGaN medium, and (vi) development of a novel liftoff process for manufacturing GaN thin-film vertical LEDs. The body of results is presented in this report shows how a solid foundation has been laid, with several noticeable accomplishments, for innovative research, consistent with the stated milestones.

  15. High power regenerative laser amplifier

    DOE Patents [OSTI]

    Miller, J.L.; Hackel, L.A.; Dane, C.B.; Zapata, L.E.

    1994-02-08

    A regenerative amplifier design capable of operating at high energy per pulse, for instance, from 20-100 Joules, at moderate repetition rates, for instance from 5-20 Hertz is provided. The laser amplifier comprises a gain medium and source of pump energy coupled with the gain medium; a Pockels cell, which rotates an incident beam in response to application of a control signal; an optical relay system defining a first relay plane near the gain medium and a second relay plane near the rotator; and a plurality of reflectors configured to define an optical path through the gain medium, optical relay and Pockels cell, such that each transit of the optical path includes at least one pass through the gain medium and only one pass through the Pockels cell. An input coupler, and an output coupler are provided, implemented by a single polarizer. A control circuit coupled to the Pockels cell generates the control signal in timed relationship with the input pulse so that the input pulse is captured by the input coupler and proceeds through at least one transit of the optical path, and then the control signal is applied to cause rotation of the pulse to a polarization reflected by the polarizer, after which the captured pulse passes through the gain medium at least once more and is reflected out of the optical path by the polarizer before passing through the rotator again to provide an amplified pulse. 7 figures.

  16. High-Power Rf Load

    DOE Patents [OSTI]

    Tantawi, Sami G. (San Mateo, CA); Vlieks, Arnold E. (Livermore, CA)

    1998-09-01

    A compact high-power RF load comprises a series of very low Q resonators, or chokes [16], in a circular waveguide [10]. The sequence of chokes absorb the RF power gradually in a short distance while keeping the bandwidth relatively wide. A polarizer [12] at the input end of the load is provided to convert incoming TE.sub.10 mode signals to circularly polarized TE.sub.11 mode signals. Because the load operates in the circularly polarized mode, the energy is uniformly and efficiently absorbed and the load is more compact than a rectangular load. Using these techniques, a load having a bandwidth of 500 MHz can be produced with an average power dissipation level of 1.5 kW at X-band, and a peak power dissipation of 100 MW. The load can be made from common lossy materials, such as stainless steel, and is less than 15 cm in length. These techniques can also produce loads for use as an alternative to ordinary waveguide loads in small and medium RF accelerators, in radar systems, and in other microwave applications. The design is easily scalable to other RF frequencies and adaptable to the use of other lossy materials.

  17. High Energy Phenomena in Blazars

    E-Print Network [OSTI]

    Laura Maraschi

    2001-07-30

    Advances in the capabilities of X-ray, gamma-ray and TeV telescopes have brought new information on the physics of relativistic jets, which are responsible for the blazar "phenomenon". In particular the broad band sensitivity of the BeppoSAX satellite, extending up to 100 KeV has allowed unprecedented studies of their hard X-ray spectra. I summarize here some basic results and present a unified view of the blazar population, whereby all sources contain essentially similar jets despite diversities in other properties, like the presence or absence of emission lines in their optical spectra. Blazars with emission lines are of particular interest in that it is possible to estimate both the luminosity of the jet and the luminosity of the accretion disk. Implications for the origin of the power carried by relativistic jets, possibly involving rapidly spinning supermassive black holes are discussed. We suggest that emission line blazars are accreting at near critical rates, while BL lacs, where emission lines are weak or absent are highly subcritical.

  18. High thermal expansion, sealing glass

    DOE Patents [OSTI]

    Brow, Richard K. (Albuquerque, NM); Kovacic, Larry (Albuquerque, NM)

    1993-01-01

    A glass composition for hermetically sealing to high thermal expansion materials such as aluminum alloys, stainless steels, copper, and copper/beryllium alloys, which includes between about 10 and about 25 mole percent Na.sub.2 O, between about 10 and about 25 mole percent K.sub.2 O, between about 5 and about 15 mole percent Al.sub.2 O.sub.3, between about 35 and about 50 mole percent P.sub.2 O.sub.5 and between about 5 and about 15 mole percent of one of PbO, BaO, and mixtures thereof. The composition, which may also include between 0 and about 5 mole percent Fe.sub.2 O.sub.3 and between 0 and about 10 mole percent B.sub.2 O.sub.3, has a thermal expansion coefficient in a range of between about 160 and 210.times.10-7/.degree.C. and a dissolution rate in a range of between about 2.times.10.sup.- 7 and 2.times.10.sup.-9 g/cm.sup.2 -min. This composition is suitable to hermetically seal to metallic electrical components which will be subjected to humid environments over an extended period of time.

  19. High thermal expansion, sealing glass

    DOE Patents [OSTI]

    Brow, R.K.; Kovacic, L.

    1993-11-16

    A glass composition is described for hermetically sealing to high thermal expansion materials such as aluminum alloys, stainless steels, copper, and copper/beryllium alloys, which includes between about 10 and about 25 mole percent Na[sub 2]O, between about 10 and about 25 mole percent K[sub 2]O, between about 5 and about 15 mole percent Al[sub 2]O[sub 3], between about 35 and about 50 mole percent P[sub 2]O[sub 5] and between about 5 and about 15 mole percent of one of PbO, BaO, and mixtures thereof. The composition, which may also include between 0 and about 5 mole percent Fe[sub 2]O[sub 3] and between 0 and about 10 mole percent B[sub 2]O[sub 3], has a thermal expansion coefficient in a range of between about 160 and 210[times]10[sup [minus]7]/C and a dissolution rate in a range of between about 2[times]10[sup [minus]7] and 2[times]10[sup [minus]9]g/cm[sup 2]-min. This composition is suitable to hermetically seal to metallic electrical components which will be subjected to humid environments over an extended period of time.

  20. Multicriteria high-speed rail route selection: application to Malaysia's high-speed rail corridor prioritization

    E-Print Network [OSTI]

    Barkan, Christopher P.L.

    Multicriteria high-speed rail route selection: application to Malaysia's high-speed rail corridor on multicriteria decision analysis in transportation and provides a case study of high-speed rail (HSR) corridor. Keywords: high-speed rail; route selection; multicriteria analysis; Malaysia Introduction High-speed rail