Powered by Deep Web Technologies
Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Watermark Designs, Ltd.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Watermark Designs, Ltd. Watermark Designs, Ltd. (Showerheads) Issued: May 29,2012 BEFORE THE U.S. DEI 1 ARTMENT OF ENERGY WASHINGTON, D.C. 20585 ) ) ) ) ) ORDER Case Number: 2011-SW-2908 By the General Counsel, U.S. Department of Energy: I. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Watermark Designs, Ltd. ("Respondent"). The Compromise Agreement resolves the case initiated against Respondent pursuant to I 0 C.F.R. § 429.122 by Notice of Proposed Civil Penalty, alleging that Respondent distributed in commerce in the United States the Waterfall or Deluge Spout showerhead, basic model SH-FAL90, which failed to meet the applicable standard for water usage. See 10 C.F.R. § 430.32(p).

2

Watermark Designs: Proposed Penalty (2010-CW-1404) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Watermark Designs: Proposed Penalty (2010-CW-1404) Watermark Designs: Proposed Penalty (2010-CW-1404) Watermark Designs: Proposed Penalty (2010-CW-1404) January 25, 2010 DOE alleged in a Notice of Proposed Civil Penalty that Watermark Designs Holdings, Ltd. d/b/a/ Watermark Designs, Ltd. failed to certify various showerheads as compliant with the applicable water conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable [energy/water/both] conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Watermark Designs: Proposed Penalty (2010-CW-1404) More Documents & Publications

3

Cryptanalysis of UCLA Watermarking Schemes for Intellectual Property Protection  

Science Conference Proceedings (OSTI)

We analyze four recently proposed watermarking schemes for intellectual property protection of digital designs.The first scheme watermarks solutions of a hard optimization problem, namely the graph coloring problem.Th e other three schemes belong to ... Keywords: cryptanalysis, watermark analysis, watermarking

Tri Van Le; Yvo Desmedt

2002-10-01T23:59:59.000Z

4

Watermark: Order (2011-SW-2908)  

Energy.gov (U.S. Department of Energy (DOE))

DOE ordered Watermark Designs, Ltd. to pay a $4,200 civil penalty after finding Watermark Designs, Ltd. had manufactured and distributed in commerce in the U.S. sixty-three units of basic model SH-FAL90, a noncompliant showerhead.

5

Natural Language Watermarking: Design, Analysis, and a Proof-of-Concept Implementation  

Science Conference Proceedings (OSTI)

We describe a scheme for watermarking natural language text by embedding small portions of the watermark bit string in the syntactic structure of a number of selected sentences in the text, with both the selection and embedding keyed (via quadratic residue) ...

Mikhail J. Atallah; Victor Raskin; Michael Crogan; Christian Hempelmann; Florian Kerschbaum; Dina Mohamed; Sanket Naik

2001-04-01T23:59:59.000Z

6

Contributed paper: Robust digital watermarking in PDTDFB domain based on least squares support vector machine  

Science Conference Proceedings (OSTI)

Geometric distortion is known as one of the most difficult attacks to resist, for it can desynchronize the location of the watermark and hence causes incorrect watermark detection. It is a challenging work to design a robust image watermarking scheme ... Keywords: Gaussian-Hermite moment, Geometric distortion, Image watermarking, Least squares support vector machine (LS-SVM), Shiftable complex directional pyramid (PDTDFB)

Hong-Ying Yang, Xiang-Yang Wang, Yan Zhang, Miao E-Nuo

2013-10-01T23:59:59.000Z

7

Watermark: Noncompliance Determination (2011-SW-2908) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Noncompliance Determination (2011-SW-2908) Noncompliance Determination (2011-SW-2908) Watermark: Noncompliance Determination (2011-SW-2908) September 26, 2011 DOE issued a Notice of Noncompliance Determination to Watermark Designs, Ltd. finding that model SH-FAL-90, a showerhead, does not comport with the water conservation standards. DOE determined the product was noncompliant based on DOE testing. Watermark Designs must immediately notify each person (or company) to whom Watermark Designs distributed the noncompliant products that the product does not meet Federal standards. In addition, Watermark Designs must provide to DOE documents and records showing the number of units Watermark Designs distributed and to whom. The manufacturer and/or private labeler of the product may be subject to civil

8

General blind watermark schemes  

Science Conference Proceedings (OSTI)

Digital watermark is an active research area that has received a considerable attention in multimedia applications. For most watermark applications, it is often desired to retrieve the embedded information without access to the host data, which is known ...

Liu Yongliang; Wen Gao; Minghao Cui; Yaxiao Song

2002-12-01T23:59:59.000Z

9

A Novel Scheme for Encoding and Watermark Embedding in VLSI Physical Design for IP Protection  

Science Conference Proceedings (OSTI)

The emerging trend of design reuse in VLSI circuits poses the threat of theft and misappropriation of intellectual property (IP) of the design. Protection of design IP is a matter of prime concern today. Here we propose a scheme SECURE IP, which tackles ...

Debasri Saha; Parthasarathi Dasgupta; Susmita Sur-Kolay; Samar Sen-Sarma

2007-03-01T23:59:59.000Z

10

Watermark: Proposed Penalty (2011-SW-2908) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Proposed Penalty (2011-SW-2908) Proposed Penalty (2011-SW-2908) Watermark: Proposed Penalty (2011-SW-2908) May 10, 2012 DOE alleged in a Notice of Proposed Civil Penalty that Watermark Designs, Ltd. manufactured and distributed noncompliant showerhead basic model SH-FAL90 in the U.S. Federal law subjects manufacturers and private labelers to civil penalties if those parties distribute in the U.S. products that do not meet applicable water conservation standards. This civil penalty notice advises the company of the potential penalties and DOE's administrative process, including the company's right to a hearing. Watermark: Proposed Penalty (2011-SW-2908) More Documents & Publications Watermark: Order (2011-SW-2908) Watermark: Noncompliance Determination (2011-SW-2908) ET Industries: Proposed Penalty (2012-SE-2902

11

A new aspect in robust digital watermarking  

Science Conference Proceedings (OSTI)

Generally, in watermarking scheme the size of the watermark is very small when compare to host image. On the contrary, this is an attempt in which a new watermarking scheme is presented where the size of host image is very small when compare with watermark ... Keywords: Digital watermarking, Normalized mass matrix, Oversampling, Singular value decomposition, Stationary wavelet transform

Gaurav Bhatnagar; Q. M. Wu; Balasubramanian Raman

2013-09-01T23:59:59.000Z

12

Quasi-commutative watermarking and encryption for secure media content distribution  

Science Conference Proceedings (OSTI)

Commutative Watermarking and Encryption (CWE) provides a solution for interoperation between watermarking and encryption. It realizes the challenging operation that embeds a watermark into the encrypted multimedia data directly, which avoids the decryption---watermarking---encryption ... Keywords: Commutative watermarking and encryption (CWE), Digital rights management (DRM), Video encryption, Watermarking

Shiguo Lian

2009-05-01T23:59:59.000Z

13

Watermarking abstract tree-structured data  

Science Conference Proceedings (OSTI)

Digital watermarking techniques have been successfully applied in multimedia data such as image, audio, video, etc. With the rapid development of Internet, the requirement of copyright and integrity protection over semi-structured data, such as XML documents ...

Gang Chen; Ke Chen; Tianlei Hu; Jinxiang Dong

2005-10-01T23:59:59.000Z

14

Digital Watermarking and Steganography, 2 edition  

Science Conference Proceedings (OSTI)

Digital audio, video, images, and documents are flying through cyberspace to their respective owners. Unfortunately, along the way, individuals may choose to intervene and take this content for themselves. Digital watermarking and steganography technology ... Keywords: Networking, Security

Ingemar Cox; Matthew Miller; Jeffrey Bloom; Jessica Fridrich; Ton Kalker

2007-11-01T23:59:59.000Z

15

Information theoretic analysis of watermarking systems  

E-Print Network (OSTI)

Watermarking models a copyright protection mechanism where an original data sequence is modified before distribution to the public in order to embed some extra information. The embedding should be transparent (i.e., the ...

Cohen, Aaron Seth, 1974-

2001-01-01T23:59:59.000Z

16

Real-time concepts for block-based watermarking schemes  

Science Conference Proceedings (OSTI)

In this paper we propose a concept to transfer a non real-time watermarking system into a watermarking system, which meets the requirements of a media-on-demand system. Several applications scenarios requiring the embedding of watermarks with maximum ...

Michael Arnold; Oliver Lobisch

2002-12-01T23:59:59.000Z

17

More on graph theoretic software watermarks: Implementation, analysis, and attacks  

Science Conference Proceedings (OSTI)

This paper presents an implementation of the watermarking method proposed by Venkatesan et al. in their paper [R. Venkatesan, V. Vazirani, S. Sinha, A graph theoretic approach to software watermarking, in: Fourth International Information Hiding Workshop, ... Keywords: Software piracy protection, Software protection, Software watermarking, Surreptitious software

Christian Collberg; Andrew Huntwork; Edward Carter; Gregg Townsend; Michael Stepp

2009-01-01T23:59:59.000Z

18

VQ-Based Image Watermarking Using Anti-Gray Coding  

Science Conference Proceedings (OSTI)

In this paper, a new digital watermarking method based on vector quantization (VQ) is proposed. In contrast with conventional VQ-based watermarking schemes, the mean of sub-blocks is used to train the VQ codebook. In addition, the Anti-Gray Coding (AGC) ... Keywords: anti-gray coding, digital watermarking, pseudo-gray coding, vector quantization

Chin-Chen Chang; Hsien-Wen Tseng

2004-04-01T23:59:59.000Z

19

Intelligent reversible watermarking in integer wavelet domain for medical images  

Science Conference Proceedings (OSTI)

The prime requirement of reversible watermarking scheme is that the system should be able to restore the cover work to its original state after extracting the hidden information. Reversible watermarking approaches, therefore, have wide applications in ... Keywords: Genetic algorithm (GA), Histogram recovery, Integer wavelet transform (IWT), Medical images, Reversible watermarking

Muhammad Arsalan; Sana Ambreen Malik; Asifullah Khan

2012-04-01T23:59:59.000Z

20

Office of Electricity Delivery And Energy Reliability To Hold...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy Reliability To Hold Technical...

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

A dual binary image watermarking based on wavelet domain and pixel distribution features  

Science Conference Proceedings (OSTI)

Considering that the binary images are featured little capability in data hiding, difficulty in watermarking embedding and two values, in order to improve the robustness and invisibility of watermarkings embedded into the binary images, a novel algorithm ... Keywords: DWT, pixel distribution features, virtual watermarking, watermarking restoration

Wei Xia; Hongwei Lu; Yizhu Zhao

2010-01-01T23:59:59.000Z

22

Fast intelligent watermarking of heterogeneous image streams through mixture modeling of PSO populations  

Science Conference Proceedings (OSTI)

In intelligent watermarking (IW), evolutionary computing (EC) is employed in order to automatically set the embedding parameters of digital watermarking systems for each image. However, the computational complexity of EC techniques makes IW unfeasible ... Keywords: Digital watermarking, Dynamic particle swarm optimization (DPSO), Gaussian mixture modeling (GMM), Intelligent watermarking, Memory-based optimization

Eduardo Vellasques, Robert Sabourin, Eric Granger

2013-06-01T23:59:59.000Z

23

A wavelet-tree-based watermarking method using distance vector of binary cluster  

Science Conference Proceedings (OSTI)

This paper proposes a wavelet-tree-based watermarking method using distance vector of binary cluster for copyright protection. In the proposed method, wavelet trees are classified into two clusters using the distance vector to denote binary watermark ... Keywords: Blind watermarking method, Copyright protection, Distance vector, Significant coefficient, Watermark, Wavelet tree

Wei-Hung Lin; Yuh-Rau Wang; Shi-Jinn Horng

2009-08-01T23:59:59.000Z

24

Scheuten Solar Holding BV | Open Energy Information  

Open Energy Info (EERE)

innovative and leading solar company that develops, produces, designs and sells PV solar modules and total PV solar solutions. References Scheuten Solar Holding BV1...

25

Waste2Energy Holdings | Open Energy Information  

Open Energy Info (EERE)

Holdings Holdings Jump to: navigation, search Name Waste2Energy Holdings Place Greenville, South Carolina Zip 29609 Sector Biomass, Renewable Energy Product The Waste2Energy Holdings is a supplier of proprietary gasification technology designed to convert municipal solid waste, biomass and other solid waste streams traditionally destined for landfill into clean renewable energy. References Waste2Energy Holdings[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Waste2Energy Holdings is a company located in Greenville, South Carolina . References ↑ "Waste2Energy Holdings" Retrieved from "http://en.openei.org/w/index.php?title=Waste2Energy_Holdings&oldid=352938

26

Joint watermarking and progressive geometric compression of 3D meshes  

Science Conference Proceedings (OSTI)

With the ever-increasing development of digital technologies and digital 3D models, the question of 3D mesh protection has becoming more and more important. One of the problems in digital watermarking is to decide how to embed in a 3D mesh as many bits ... Keywords: 3D compression, blind watermarking, dither modulation, semi-regular 3D meshes, wavelet transform

Ines Bouzidi; Azza Ouled Zaid; Meha Hachani; William Puech

2013-06-01T23:59:59.000Z

27

Solar Century Holdings Solarcentury | Open Energy Information  

Open Energy Info (EERE)

Holdings Solarcentury Holdings Solarcentury Jump to: navigation, search Name Solar Century Holdings (Solarcentury) Place London, Greater London, United Kingdom Zip SE1 7AB Sector Buildings, Solar Product Designs, installs and maintains solar PV and thermal systems in buildings as well as managing the sale of surplus power back to the grid. References Solar Century Holdings (Solarcentury)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Century Holdings (Solarcentury) is a company located in London, Greater London, United Kingdom . References ↑ "Solar Century Holdings (Solarcentury)" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Century_Holdings_Solarcentury&oldid=351254

28

SOFCo EFS Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

SOFCo EFS Holdings LLC SOFCo EFS Holdings LLC Jump to: navigation, search Name SOFCo-EFS Holdings LLC Place Alliance, Ohio Zip 44601 Product SOFCo-EFS has developed a proprietary planar SOFC design and a low cost approach to manufacturing that is expected to lead to commercially viable SOFC power systems. References SOFCo-EFS Holdings LLC[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. SOFCo-EFS Holdings LLC is a company located in Alliance, Ohio . References ↑ "SOFCo-EFS Holdings LLC" Retrieved from "http://en.openei.org/w/index.php?title=SOFCo_EFS_Holdings_LLC&oldid=351221" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes

29

Region based QIM digital watermarking scheme for image database in DCT domain  

Science Conference Proceedings (OSTI)

This paper proposes a region based digital watermarking scheme to serve the purpose of copyright protection and integrity verification of image database using discrete cosine transform (DCT). The objective is achieved by embedding watermark into visually ...

Amit Phadikar; Santi P. Maity; Bhupendra Verma

2011-05-01T23:59:59.000Z

30

Audio watermarking based on quantization index modulation using combined perceptual masking  

Science Conference Proceedings (OSTI)

In this paper, a robust audio watermarking scheme for MPEG-1/ Audio Layer II compressed domain is proposed. The scheme is implemented by modifying the subband coefficients using adaptive quantization index modulation. The watermarking procedure exploits ... Keywords: Digital audio watermarking, Masking threshold, Quantization index modulation, Subbands

Jyotsna Singh; Parul Garg; Alok Nath De

2012-08-01T23:59:59.000Z

31

Image Compression and Watermarking scheme using Scalar Quantization  

E-Print Network (OSTI)

This paper presents a new compression technique and image watermarking algorithm based on Contourlet Transform (CT). For image compression, an energy based quantization is used. Scalar quantization is explored for image watermarking. Double filter bank structure is used in CT. The Laplacian Pyramid (LP) is used to capture the point discontinuities, and then followed by a Directional Filter Bank (DFB) to link point discontinuities. The coefficients of down sampled low pass version of LP decomposed image are re-ordered in a pre-determined manner and prediction algorithm is used to reduce entropy (bits/pixel). In addition, the coefficients of CT are quantized based on the energy in the particular band. The superiority of proposed algorithm to JPEG is observed in terms of reduced blocking artifacts. The results are also compared with wavelet transform (WT). Superiority of CT to WT is observed when the image contains more contours. The watermark image is embedded in the low pass image of contourlet decomposition. ...

Swamy, Kilari Veera; Reddy, Y V Bhaskar; Kumar, S Srinivas; 10.5121/ijngn.2010.2104

2010-01-01T23:59:59.000Z

32

Office of Electricity Delivery And Energy Reliability To Hold...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy...

33

Clear Skies Group Inc Holdings Inc | Open Energy Information  

Open Energy Info (EERE)

Sector Solar Product Designs and installs photovoltaic, solar thermal and co-generation power generation systems for domestic use. References Clear Skies Group Inc Holdings...

34

Solar Hold | Open Energy Information  

Open Energy Info (EERE)

Solar Hold Jump to: navigation, search Name Solar-Hold Place Sofia, Bulgaria Sector Solar Product Bulgarian solar project developer; as of September 2007, seeking permit for 10x5MW...

35

Medical Image Integrity Control Combining Digital Signature and Lossless Watermarking  

E-Print Network (OSTI)

Medical Image Integrity Control Combining Digital Signature and Lossless Watermarking W. Pan1,3 , G protection of medical content becomes a major issue of computer security. Since medical contents are more proposed as a com- plementary mechanism for medical data protection. In this paper, we focus

Paris-Sud XI, Université de

36

Real-time Registration of Paper Watermarks Paul F Whelan  

E-Print Network (OSTI)

the top-hat image shown in Figure 3c. 4 Paper with Laid and Chain Lines If we perform a white top registration. These strips are added to either side of the paper and represent 3% of the total amount of paper-time Registration of Paper Watermarks 26 (a) First threshold of white top-hat: marker image. (b) Second threshold

Whelan, Paul F.

37

Majdaline Holdings | Open Energy Information  

Open Energy Info (EERE)

Majdaline Holdings Majdaline Holdings Jump to: navigation, search Name Majdaline Holdings Place Morocco Product Moroccan company involved in a joint venture with Asola to produce modules in the country. References Majdaline Holdings[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Majdaline Holdings is a company located in Morocco . References ↑ "Majdaline Holdings" Retrieved from "http://en.openei.org/w/index.php?title=Majdaline_Holdings&oldid=348603" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

38

Wavelet-based image watermarking with visibility range estimation based on HVS and neural networks  

Science Conference Proceedings (OSTI)

This work proposes a wavelet-based image watermarking (WIW) technique, based on the human visible system (HVS) model and neural networks, for image copyright protection. A characteristic of the HVS, which is called the just noticeable difference (JND) ... Keywords: Human visual system, Image watermarking, Just noticeable difference, Neural networks, Wavelet transformation

Hung-Hsu Tsai; Chi-Chih Liu

2011-04-01T23:59:59.000Z

39

Spatial Domain Watermarking Scheme for Colored Images Based on Log-average Luminance  

E-Print Network (OSTI)

In this paper a new watermarking scheme is presented based on log-average luminance. A colored-image is divided into blocks after converting the RGB colored image to YCbCr color space. A monochrome image of 1024 bytes is used as the watermark. To embed the watermark, 16 blocks of size 8X8 are selected and used to embed the watermark image into the original image. The selected blocks are chosen spirally (beginning form the center of the image) among the blocks that have log-average luminance higher than or equal the log-average luminance of the entire image. Each byte of the monochrome watermark is added by updating a luminance value of a pixel of the image. If the byte of the watermark image represented white color (255) a value is added to the image pixel luminance value, if it is black (0) the is subtracted from the luminance value. To extract the watermark, the selected blocks are chosen as the above, if the difference between the luminance value of the watermarked image pixel and the original image pixe...

Hussein, Jamal A

2010-01-01T23:59:59.000Z

40

Four-scanning attack on hierarchical digital watermarking method for image tamper detection and recovery  

Science Conference Proceedings (OSTI)

In a recent paper presented by Lin et al., a block-based hierarchical watermarking algorithm for digital images is proposed. It adopts parity check and the intensity-relation check to conduct the experiment of image tamper detection. Their experimental ... Keywords: Fragile watermarking, Image authentication, Tamper detection

Chin-Chen Chang; Yi-Hsuan Fan; Wei-Liang Tai

2008-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Machine learning based adaptive watermark decoding in view of anticipated attack  

Science Conference Proceedings (OSTI)

We present an innovative scheme of blindly extracting message bits when a watermarked image is distorted. In this scheme, we have exploited the capabilities of machine learning (ML) approaches for nonlinearly classifying the embedded bits. The proposed ... Keywords: Artificial neural networks (ANN), Bit correct ratio (BCR), Decoding, Discrete cosine transform (DCT), Support vector machines (SVM), Watermarking

Asifullah Khan; Syed Fahad Tahir; Abdul Majid; Tae-Sun Choi

2008-08-01T23:59:59.000Z

42

Inci Holding | Open Energy Information  

Open Energy Info (EERE)

Inci Holding Inci Holding Jump to: navigation, search Name Inci Holding Place Izmir, Turkey Zip 35410 Sector Solar Product Turkey-based industrial group specializing in the manufacture of wheel bases and hubs, as well as batteries. The firm is a joint developer in a PV solar plant in Turkey. Coordinates 38.425147°, 27.142302° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.425147,"lon":27.142302,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

43

Westside Holdings | Open Energy Information  

Open Energy Info (EERE)

Westside Holdings Westside Holdings Jump to: navigation, search Name Westside Holdings Address 676 North Michigan Avenue Suite 2850 Place Chicago, Illinois Zip 60611 Phone number 312.981.1220 Website http://www.westsideholdings.co Coordinates 41.8947801°, -87.6244809° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.8947801,"lon":-87.6244809,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

44

Elektra Holding | Open Energy Information  

Open Energy Info (EERE)

Elektra Holding Elektra Holding Jump to: navigation, search Name Elektra Holding Place Sofia, Bulgaria Sector Biomass, Hydro, Solar, Wind energy Product A company owned by a group of Spanish families operating in Bulgaria, Ukraine, Belarus, Cyprus and Mexico developing wind, small hydro, biomass and solar. Coordinates 42.697085°, 23.32455° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.697085,"lon":23.32455,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

45

SITIZN Group Holding AG | Open Energy Information  

Open Energy Info (EERE)

Holding AG Jump to: navigation, search Name SITIZN Group Holding AG Place Riederich, Germany Zip 72585 Sector Solar Product Germany-based solar technology and consultancy firm....

46

Axeon Holdings | Open Energy Information  

Open Energy Info (EERE)

Holdings Holdings Place Aberdeen, United Kingdom Zip AB22 8GT Product Owns battery and battery power management system technologies, which it is commercialising for hybrid and electric vehicle applications. Coordinates 46.975867°, -123.81598° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":46.975867,"lon":-123.81598,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

47

BM Holding | Open Energy Information  

Open Energy Info (EERE)

BM Holding BM Holding Jump to: navigation, search Name BM Holding Address Eskişehir Yolu Bilkent Kavşağı No:4 Place Ankara, Turkey Zip 06800 Product Turkish construction company building large scale power generating projects in Turkey, daughter company of MH Muhendislik ve Insaat. Website http://www.bmholding.com.tr/ Coordinates 39.907071°, 32.765402° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.907071,"lon":32.765402,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

48

Apollo Solar Energy Technology Holdings Ltd former RBI Holdings Ltd | Open  

Open Energy Info (EERE)

Ltd former RBI Holdings Ltd Ltd former RBI Holdings Ltd Jump to: navigation, search Name Apollo Solar Energy Technology Holdings Ltd (former RBI Holdings Ltd) Place Kowloon, Hong Kong Sector Solar Product Hong Kong-based manufacturer of silicon-based thin film solar PV modules. References Apollo Solar Energy Technology Holdings Ltd (former RBI Holdings Ltd)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Apollo Solar Energy Technology Holdings Ltd (former RBI Holdings Ltd) is a company located in Kowloon, Hong Kong . References ↑ "Apollo Solar Energy Technology Holdings Ltd (former RBI Holdings Ltd)" Retrieved from "http://en.openei.org/w/index.php?title=Apollo_Solar_Energy_Technology_Holdings_Ltd_former_RBI_Holdings_Ltd&oldid=342234

49

Office of Electricity Delivery And Energy Reliability To Hold Technical  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Electricity Delivery And Energy Reliability To Hold Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission Office of Electricity Delivery And Energy Reliability To Hold Technical Conference On The Design Of Future Electric Transmission February 5, 2009 - 10:57am Addthis On March 4, 2009, the Department of Energy's Office of Electricity Delivery and Energy Reliability (OE) will conduct a technical conference in the Washington, DC area to discuss the design of future electric transmission. The technical conference will discuss the likely demand for future electric transmission and whether the development of conceptual alternative extra high voltage (EHV) systems would assist generation developers, State energy policy officials, utility planners, and other

50

BTX Holdings Inc | Open Energy Information  

Open Energy Info (EERE)

BTX Holdings Inc BTX Holdings Inc Jump to: navigation, search Name BTX Holdings Inc Place Fort Lauderdale, Florida Zip 33309 Sector Biomass Product BTX Holdings acquires, develops, and deploys technologies to process plant derived biomass waste, extract the usable fractions, and utilise or sell the extractions in further secondary processes in the United States. References BTX Holdings Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. BTX Holdings Inc is a company located in Fort Lauderdale, Florida . References ↑ "BTX Holdings Inc" Retrieved from "http://en.openei.org/w/index.php?title=BTX_Holdings_Inc&oldid=343083" Categories: Clean Energy Organizations

51

3C Holding AG | Open Energy Information  

Open Energy Info (EERE)

Holding AG Holding AG Jump to: navigation, search Name 3C Holding AG Place Bad Vilbel/Frankfurt am Main, Germany Zip 61118 Sector Services Product 3C Holding AG develops trading strategies for EU allowances, JI/CDM Projects and climate neutral events, products and services. Merged with Factor Consulting to form First Climate. References 3C Holding AG[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. 3C Holding AG is a company located in Bad Vilbel/Frankfurt am Main, Germany . References ↑ "3C Holding AG" Retrieved from "http://en.openei.org/w/index.php?title=3C_Holding_AG&oldid=341624" Categories: Clean Energy Organizations Companies Organizations Stubs

52

Ultrasonic methods for locating hold-up  

SciTech Connect

Hold-up remains one of the major contributing factors to unaccounted for materials and can be a costly problem in decontamination and decommissioning activities. Ultrasonic techniques are being developed to noninvasively monitor hold-up in process equipment where the inner surface of such equipment may be in contact with the hold-up material. These techniques may be useful in improving hold-up measurements as well as optimizing decontamination techniques.

Sinha, D.N.; Olinger, C.T.

1995-09-01T23:59:59.000Z

53

NNSA Holds Radiation Emergency Consequence Management Training...  

National Nuclear Security Administration (NNSA)

Holds Radiation Emergency Consequence Management Training in Israel | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering...

54

Genetic algorithms applied to reconstructing coded imaging of neutrons and analysis of residual watermark  

Science Conference Proceedings (OSTI)

Monte-Carlo simulation of neutron coded imaging based on encoding aperture for Z-pinch of large field-of-view with 5 mm radius has been investigated, and then the coded image has been obtained. Reconstruction method of source image based on genetic algorithms (GA) has been established. 'Residual watermark,' which emerges unavoidably in reconstructed image, while the peak normalization is employed in GA fitness calculation because of its statistical fluctuation amplification, has been discovered and studied. Residual watermark is primarily related to the shape and other parameters of the encoding aperture cross section. The properties and essential causes of the residual watermark were analyzed, while the identification on equivalent radius of aperture was provided. By using the equivalent radius, the reconstruction can also be accomplished without knowing the point spread function (PSF) of actual aperture. The reconstruction result is close to that by using PSF of the actual aperture.

Zhang Tiankui; Hu Huasi; Jia Qinggang; Zhang Fengna; Liu Zhihua; Hu Guang; Guo Wei [School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049 (China); Chen Da [School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049 (China); College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016 (China); Li Zhenghong [Institute of Nuclear Physics and Chemistry, CAEP, Mianyang, 621900 Sichuan (China); Wu Yuelei [School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049 (China); Nuclear and Radiation Safety Centre, State Environmental Protection Administration (SEPA), Beijing 100082 (China)

2012-11-15T23:59:59.000Z

55

Sunseeker Energy Holding AG | Open Energy Information  

Open Energy Info (EERE)

Sunseeker Energy Holding AG Sunseeker Energy Holding AG Jump to: navigation, search Name Sunseeker Energy Holding AG Place Schindellegi, Switzerland Zip 8834 Sector Solar Product Switzerland-based company seeking to developing new generation solar and hybrid power technologies for sustainable energy use. References Sunseeker Energy Holding AG[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sunseeker Energy Holding AG is a company located in Schindellegi, Switzerland . References ↑ "Sunseeker Energy Holding AG" Retrieved from "http://en.openei.org/w/index.php?title=Sunseeker_Energy_Holding_AG&oldid=351842" Categories: Clean Energy Organizations Companies Organizations

56

Sears Holdings Corporation's Environmental Policy Statement ...  

NLE Websites -- All DOE Office Websites (Extended Search)

resources Sears Holdings Corporation's Environmental Policy Statement Creating an energy policy is a key step in formalizing your organization's commitment to saving...

57

Downhole Sensor Holds Transformative Potential - Energy ...  

SiC is a class of wide-bandgap semiconducting material that holds transformative potential not only for high-temperature electronics but also for ...

58

TWS Industrial Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

they are one of the world's largest ODM makers of Lithium Ion and Lithium Polymer batteries for portable electronic devices. References TWS Industrial (Holdings) Ltd1...

59

Accent Energy Holdings, LLC | Open Energy Information  

Open Energy Info (EERE)

Accent Energy Holdings, LLC Place Ohio Utility Id 54872 Utility Location Yes Ownership R Activity Retail Marketing Yes References EIA Form EIA-861 Final Data File for 2010 -...

60

Glacial Energy Holdings (Ohio) | Open Energy Information  

Open Energy Info (EERE)

Retrieved from "http:en.openei.orgwindex.php?titleGlacialEnergyHoldings(Ohio)&oldid412595" Categories: EIA Utility Companies and Aliases Utility Companies...

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Oilsource Holding Group | Open Energy Information  

Open Energy Info (EERE)

consortium composed of a group of companies involved in a specific segment of the biofuel industry. References Oilsource Holding Group1 LinkedIn Connections CrunchBase...

62

Covanta Holding Corporation | Open Energy Information  

Open Energy Info (EERE)

New Jersey Zip 7004 Product A holding company with separate subsidiaries offering waste-to-energy conversion, and a variety of insurance products. Coordinates 47.38522,...

63

Intec Power Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

Kingdom Zip NG6 0GA Sector Buildings Product String representation "Intec's "Silent ... control system." is too long. References Intec Power Holdings Ltd1 LinkedIn Connections...

64

Centro Renewables Holding Limited | Open Energy Information  

Open Energy Info (EERE)

developer of wind, solar and water power facilities in China, Taiwan and South Korea. References Centro Renewables Holding Limited1 LinkedIn Connections CrunchBase...

65

Increasing water holding capacity for irrigation  

NLE Websites -- All DOE Office Websites (Extended Search)

Increasing water holding capacity for irrigation Reseachers recommend solutions for sediment trapping in irrigation system LANL and SNL leveraged technical expertise to determine...

66

A novel image compression method using watermarking technique in JPEG coding process  

Science Conference Proceedings (OSTI)

Watermarking is a technique used to embed copyright information in an image. In this paper, we propose a novel image compression method which embeds a part of the coding parameters, instead of the copyright information, into an own image. The proposed ...

Hideo Kuroda; Shinichi Miyata; Makoto Fujimura; Hiroki Imamura

2007-08-01T23:59:59.000Z

67

Tracing Medical Images Using Multi-Band Watermarks Mingyan Li, Sreeram Narayanan and Radha Poovendran  

E-Print Network (OSTI)

1 of 4 Tracing Medical Images Using Multi-Band Watermarks Mingyan Li, Sreeram Narayanan and Radha identify that there is a gap between current security solutions for the privacy protection of medical who distribute medical images illegally. We evaluate the suitability of some most widely used

Poovendran, Radha

68

Holding fixture for metallographic mount polishing  

DOE Patents (OSTI)

A fixture for holding mounted specimens for polishing, having an arm; a body attached to one end of the arm, the body having at least one flange having an opening to accommodate a mounted specimen; and a means applying pressure against the outer surface of the mounted specimen to hold the specimen in contact with the polishing surface.

Barth, C.H.; Cramer, C.E.

1996-12-31T23:59:59.000Z

69

PARS II Process Document - On Hold Projects | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects PARS II Process Document - On Hold Projects This document details the process approved by the CRB for placing Capital Asset projects on hold, re-activating on hold...

70

Misawa Homes Holdings Inc | Open Energy Information  

Open Energy Info (EERE)

Misawa Homes Holdings Inc Misawa Homes Holdings Inc Jump to: navigation, search Name Misawa Homes Holdings Inc Place Tokyo, Japan Zip 163-0850 Product A quoted Japanese construction holding company; through its subsidiaries, offers houses and office spaces with PV rooftops. Coordinates 35.670479°, 139.740921° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.670479,"lon":139.740921,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

71

Edgewood Carbon Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

Edgewood Carbon Holdings LLC Edgewood Carbon Holdings LLC Jump to: navigation, search Name Edgewood Carbon Holdings LLC Place Cornwall, Vermont Zip 57530 Sector Carbon Product Edgewood Carbon Holdings LLC is active worldwide in the evolving commercialization of carbon recovery. Coordinates 50.443321°, -4.93986° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":50.443321,"lon":-4.93986,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

72

Intelligent Energy Holdings | Open Energy Information  

Open Energy Info (EERE)

Intelligent Energy Holdings Place London, United Kingdom Zip W1K 5DB Product Intelligent Energy provides energy solutions based on PEM fuel cells for the distributed power and...

73

AP Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

AP Holdings LLC Place Texas Utility Id 56571 Utility Location Yes Ownership R ISO Ercot Yes ISO NY Yes Activity Retail Marketing Yes References EIA Form EIA-861 Final Data File for...

74

US Ethanol Holdings | Open Energy Information  

Open Energy Info (EERE)

investment bank and advisory firm, Geneva Capital, created in 2006 to develop 6 bioethanol plants in the US. References US Ethanol Holdings1 LinkedIn Connections CrunchBase...

75

An internet-based IP protection scheme for circuit designs using linear feedback shift register (LFSR)-based locking  

Science Conference Proceedings (OSTI)

IP reuse is rapidly proliferating recent automated circuit design. It is facing serious challenges like forgery, theft and misappropriation of intellectual property (IP) of the design. Thus, protection of design IP is a matter of ... Keywords: decryption, encryption, intellectual property protection (IPP), watermarking

Raju Halder; Parthasarathi Dasgupta; Saptarshi Naskar; Samar Sen Sarma

2009-08-01T23:59:59.000Z

76

Genmar Holdings Inc | Open Energy Information  

Open Energy Info (EERE)

Genmar Holdings Inc Genmar Holdings Inc Jump to: navigation, search Name Genmar Holdings Inc. Place Minneapolis, Minnesota Zip 55402 Sector Wind energy Product Minnesota-based boat manufacturer, whose 92% majority-owned subsidiary, VEC Technologies, plans to enter the US wind market by building three to five blade factories. Coordinates 44.979035°, -93.264929° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.979035,"lon":-93.264929,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

77

First Windfarm Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

Windfarm Holdings Ltd Windfarm Holdings Ltd Jump to: navigation, search Name First Windfarm Holdings Ltd Place Bristol, England, United Kingdom Zip BS8 1HG Sector Wind energy Product Britsol-based developer & owner of wind power generation assets. Coordinates 42.55678°, -88.050449° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.55678,"lon":-88.050449,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

78

Generation Resources Holding Co | Open Energy Information  

Open Energy Info (EERE)

Resources Holding Co Resources Holding Co Jump to: navigation, search Name Generation Resources Holding Co Place Leawood, Kansas Zip 66211-2607 Sector Renewable Energy, Wind energy Product Renewable energy project developer focused on wind. Coordinates 37.02958°, -94.479173° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.02958,"lon":-94.479173,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

79

Bakhu Holdings Corp | Open Energy Information  

Open Energy Info (EERE)

Bakhu Holdings Corp Bakhu Holdings Corp Jump to: navigation, search Name Bakhu Holdings Corp Place Moscow, Russian Federation Zip 105523 Sector Services, Solar Product Russia-based gold extraction services company. The firm also produces solar PV wafers and other solar products. Coordinates 55.75695°, 37.614975° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.75695,"lon":37.614975,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

80

Cornerstone Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

Cornerstone Holdings LLC Cornerstone Holdings LLC Jump to: navigation, search Name Cornerstone Holdings LLC Address 11001 W. 120th Ave, Suite 330 Place Broomfield, Colorado Zip 80021 Region Rockies Area Product Private equity Phone number (303) 410-2510 Website http://www.cstoneholdings.com/ Coordinates 39.914942°, -105.121139° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.914942,"lon":-105.121139,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Konica Minolta Holdings | Open Energy Information  

Open Energy Info (EERE)

Konica Minolta Holdings Konica Minolta Holdings Jump to: navigation, search Name Konica Minolta Holdings Place Tokyo, Japan Sector Solar Product String representation "Japan-based pri ... thermal power." is too long. Coordinates 35.670479°, 139.740921° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.670479,"lon":139.740921,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

82

LETTER TEMPLATE TO PROJECTS ON HOLD  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ON HOLD ON HOLD DATE, 2011 NAME ORGANIZATION ADDRESS CITY, ST ZIP Dear NAME: Thank you for your ongoing interest in the Section 1705 loan guarantee program. To date, under the 1705 program, the Department of Energy (DOE) has issued conditional commitments totaling almost $11 billion to nineteen clean energy projects with total project costs of over $16 billion. These projects will support the development of our nation's 21 st century clean energy economy and create thousands of good- paying jobs. As you know, the program's limited appropriations (commitments already made will likely utilize approximately two-thirds of the program's appropriated funds), deep pool of quality applicants, and

83

International Framework for Nuclear Energy Cooperation to Hold...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Framework for Nuclear Energy Cooperation to Hold Ministerial-Level Meeting Sept. 29 in Warsaw, Poland International Framework for Nuclear Energy Cooperation to Hold...

84

American Green Holdings LLC AGH | Open Energy Information  

Open Energy Info (EERE)

Holdings LLC AGH Jump to: navigation, search Name American Green Holdings LLC (AGH) Place Montana Product Montana-based biodiesel manufacturer, using high-pressure reactors....

85

NNSA Acting Administrator Bruce Held holds all hands meeting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Media Room > Photo Gallery > NNSA Acting Administrator Bruce Held holds all ... NNSA Acting Administrator Bruce Held holds all hands meeting NNSANews posted a photo: NNSA Acting...

86

Department of Energy Will Hold a Batteries and Energy Storage...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Will Hold a Batteries and Energy Storage Information Meeting on October 21, 2011 Department of Energy Will Hold a Batteries and Energy Storage Information...

87

Glacial Energy Holdings (New York) | Open Energy Information  

Open Energy Info (EERE)

Energy Holdings (New York) Jump to: navigation, search Name Glacial Energy Holdings Place New York Utility Id 54871 References EIA Form EIA-861 Final Data File for 2010 -...

88

GCL Solar Energy Technology Holdings formerly GCL Silicon aka...  

Open Energy Info (EERE)

GCL Solar Energy Technology Holdings formerly GCL Silicon aka Jiangsu Zhongneng Polysilicon Jump to: navigation, search Name GCL Solar Energy Technology Holdings (formerly GCL...

89

China Technology Solar Power Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

Holdings Ltd Jump to: navigation, search Name China Technology Solar Power Holdings Ltd Place Hong Kong Sector Solar Product China-based solar project developer, which is actively...

90

EXEN Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

EXEN Holdings LLC EXEN Holdings LLC Jump to: navigation, search Logo: EXEN Holdings LLC Name EXEN Holdings LLC Address 1339 Simpson Way Place Escondido, California Zip 92029 Country United States Sector Efficiency Product Hydro-diesel fuel system for diesel engines Year founded 2006 Number of employees 1-10 Company Type For Profit Company Ownership Private Small Business Yes Technology Hydro-diesel fuel system. Project Effective solution to diesel engine in regards to high diesel fuel cost and lowered emissions. Phone number 760 747 7177 Website http://www.exentechnologies.co Coordinates The following coordinate was not recognized: CALIFORNIA.The following coordinate was not recognized: CALIFORNIA. Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.778261,"lon":-119.4179324,"alt":0,"address":"CALIFORNIA","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

91

Clean Cities: National Clean Fleets Partner: Enterprise Holdings  

NLE Websites -- All DOE Office Websites (Extended Search)

Enterprise Holdings to someone by E-mail Share Clean Cities: National Clean Fleets Partner: Enterprise Holdings on Facebook Tweet about Clean Cities: National Clean Fleets Partner: Enterprise Holdings on Twitter Bookmark Clean Cities: National Clean Fleets Partner: Enterprise Holdings on Google Bookmark Clean Cities: National Clean Fleets Partner: Enterprise Holdings on Delicious Rank Clean Cities: National Clean Fleets Partner: Enterprise Holdings on Digg Find More places to share Clean Cities: National Clean Fleets Partner: Enterprise Holdings on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program Advanced Vehicle Technology Competitions Natural Gas Transit & School Bus Users Group

92

Multitrade Biomass Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

Multitrade Biomass Holdings LLC Multitrade Biomass Holdings LLC Place Ridgeway, Virginia Zip 24148-0000 Sector Renewable Energy Product Virginia-based developer of renewable wood fired power plants and feedstock producer. Coordinates 43.001473°, -89.989356° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.001473,"lon":-89.989356,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

93

Aventine Renewable Energy Holdings | Open Energy Information  

Open Energy Info (EERE)

Aventine Renewable Energy Holdings Aventine Renewable Energy Holdings Place Pekin, Illinois Zip 61555-0010 Product Illinois-based producer and marketer of ethanol in the United States. Coordinates 47.790615°, -98.327069° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.790615,"lon":-98.327069,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

94

AP Holdings LLC (New York) | Open Energy Information  

Open Energy Info (EERE)

icon AP Holdings LLC (New York) Jump to: navigation, search Name AP Holdings LLC Place New York Utility Id 56571 References EIA Form EIA-861 Final Data File for 2010 -...

95

Energy Plus Holdings LLC (New York) | Open Energy Information  

Open Energy Info (EERE)

Holdings LLC (New York) Jump to: navigation, search Name Energy Plus Holdings LLC Place New York Utility Id 56265 References EIA Form EIA-861 Final Data File for 2010 -...

96

Secretary Bodman and Pakistan Officials Hold High-Level Energy...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary Bodman and Pakistan Officials Hold High-Level Energy Meeting Secretary Bodman and Pakistan Officials Hold High-Level Energy Meeting March 13, 2006 - 11:48am Addthis...

97

Broadwind Energy Formerly Tower Tech Holdings | Open Energy Information  

Open Energy Info (EERE)

Broadwind Energy Formerly Tower Tech Holdings Broadwind Energy Formerly Tower Tech Holdings Jump to: navigation, search Name Broadwind Energy (Formerly Tower Tech Holdings) Place Manitowoc, Wisconsin Zip 54221-1957 Sector Wind energy Product US-based manufacturer of wind turbine towers, turbine assemblies such as nacelles, and monopiles. References Broadwind Energy (Formerly Tower Tech Holdings)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Broadwind Energy (Formerly Tower Tech Holdings) is a company located in Manitowoc, Wisconsin . References ↑ "Broadwind Energy (Formerly Tower Tech Holdings)" Retrieved from "http://en.openei.org/w/index.php?title=Broadwind_Energy_Formerly_Tower_Tech_Holdings&oldid=343059"

98

Solar Sailor Holdings Ltd SSHL | Open Energy Information  

Open Energy Info (EERE)

Sailor Holdings Ltd SSHL Sailor Holdings Ltd SSHL Jump to: navigation, search Name Solar Sailor Holdings Ltd (SSHL) Place Chatswood, New South Wales, Australia Zip 2067 Sector Solar Product Solar Sailor 'hybrid marine power' (HMP) and 'solar wing' technology is suitable for a wide range of applications from small-unmanned vessels to large tankers, including ferries, tourist cruisers and private yachts. References Solar Sailor Holdings Ltd (SSHL)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Sailor Holdings Ltd (SSHL) is a company located in Chatswood, New South Wales, Australia . References ↑ "Solar Sailor Holdings Ltd (SSHL)" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Sailor_Holdings_Ltd_SSHL&oldid=35132

99

Chemical Consortium Holdings Inc ChemCon | Open Energy Information  

Open Energy Info (EERE)

Consortium Holdings Inc ChemCon Consortium Holdings Inc ChemCon Jump to: navigation, search Name Chemical Consortium Holdings Inc (ChemCon) Place Bellingham, Washington State Zip 98228 Sector Hydro, Hydrogen Product Develops and operates projects in the bioethanol, biodiesel, methanol, hydrogen and liquid natural gas industries. References Chemical Consortium Holdings Inc (ChemCon)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Chemical Consortium Holdings Inc (ChemCon) is a company located in Bellingham, Washington State . References ↑ "Chemical Consortium Holdings Inc (ChemCon)" Retrieved from "http://en.openei.org/w/index.php?title=Chemical_Consortium_Holdings_Inc_ChemCon&oldid=343459

100

Specialized Technology Resources Inc STR Holding Inc | Open Energy  

Open Energy Info (EERE)

Technology Resources Inc STR Holding Inc Technology Resources Inc STR Holding Inc Jump to: navigation, search Name Specialized Technology Resources Inc (STR Holding Inc) Place Enfield, Connecticut Zip 6082 Product US-based manufacturer of EVA encapsulants for PV cells. References Specialized Technology Resources Inc (STR Holding Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Specialized Technology Resources Inc (STR Holding Inc) is a company located in Enfield, Connecticut . References ↑ "Specialized Technology Resources Inc (STR Holding Inc)" Retrieved from "http://en.openei.org/w/index.php?title=Specialized_Technology_Resources_Inc_STR_Holding_Inc&oldid=351609" Categories:

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Z Group Steel Holding Zelezarny Veseli | Open Energy Information  

Open Energy Info (EERE)

Z Group Steel Holding Zelezarny Veseli Z Group Steel Holding Zelezarny Veseli Jump to: navigation, search Name Z-Group Steel Holding - Zelezarny Veseli Place Veseli nad Moravou, Czech Republic Zip 698 12 Sector Wind energy Product Czech Republic-based steel making firm. They are diversifying into wind plant and PV plant development. References Z-Group Steel Holding - Zelezarny Veseli[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Z-Group Steel Holding - Zelezarny Veseli is a company located in Veseli nad Moravou, Czech Republic . References ↑ "Z-Group Steel Holding - Zelezarny Veseli" Retrieved from "http://en.openei.org/w/index.php?title=Z_Group_Steel_Holding_Zelezarny_Veseli&oldid=353435"

102

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31 - 21340 of 31,917 results. 31 - 21340 of 31,917 results. Download Watermark Designs: Order (2010-CW-1404) DOE ordered Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd. to pay a $135,104 civil penalty after finding Watermark Designs had failed to certify that various models of showerheads comply with the applicable water conservation standards. http://energy.gov/gc/downloads/watermark-designs-order-2010-cw-1404 Download YMGI: Order (2011-SCE-1605) DOE ordered YMGI Group LLC to pay a $31,400 civil penalty after finding (1) YMGI had failed to certify that certain models of residential central air conditioners comply with the applicable energy conservation standards and (2) YMGI had distributed in commerce model TTWC-18K-31B, a through-the-wall air conditioner that does not meet the applicable energy conservation

103

Remix and play: lessons from rule variants in texas hold'em and halo 2  

Science Conference Proceedings (OSTI)

Players can change the rules of a multi-person game to experience a different gameplay mechanic, add thematic color, or fine-tune its balance. To better understand game variants, we use a grounded approach to analyze 62 variants for Texas Hold'em, a ... Keywords: customization, game design, halo, honor rules, poker, variants

Gifford Cheung; Jeff Huang

2012-02-01T23:59:59.000Z

104

Associated Media Holdings Inc formerly EL Tigre Development Corp | Open  

Open Energy Info (EERE)

Media Holdings Inc formerly EL Tigre Development Corp Media Holdings Inc formerly EL Tigre Development Corp Jump to: navigation, search Name Associated Media Holdings Inc (formerly EL Tigre Development Corp) Place San Diego, California Zip 92150-2548 Product Engaged in research, development and commercialization of technologies for the production of alternative sources of fuel and the destruction and/or remediation of liquid and solid waste. References Associated Media Holdings Inc (formerly EL Tigre Development Corp)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Associated Media Holdings Inc (formerly EL Tigre Development Corp) is a company located in San Diego, California . References ↑ "Associated Media Holdings Inc (formerly EL Tigre Development

105

Pepco Holdings, Inc. Smart Grid RFI: Addressing Policy and Logistical  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Holdings, Inc. Smart Grid RFI: Addressing Policy and Holdings, Inc. Smart Grid RFI: Addressing Policy and Logistical Challenges Pepco Holdings, Inc. Smart Grid RFI: Addressing Policy and Logistical Challenges Pepco Holdings, Inc. Smart Grid RFI: Addressing Policy and Logistical Challenges. Pepco Holdings, Inc. (PHI) is pleased to respond to the US Department of Energy (DOE) request for information regarding addressing policy and logistical challenges to smart grid implementation. This follows on the heels of PHI's responses to two other DOE RFls on data access and communications requirements. Pepco Holdings, Inc. Smart Grid RFI: Addressing Policy and Logistical Challenges More Documents & Publications DC OPC Comments. September 17, 2010 Addressing Policy and Logistical Challenges to smart grid Implementation:

106

International Atomic Energy Agency holds conference on fusion...  

NLE Websites -- All DOE Office Websites (Extended Search)

International Atomic Energy Agency holds conference on fusion roadmap By John Greenwald November 8, 2012 Tweet Widget Facebook Like Google Plus One Hutch Neilson, third from left,...

107

Energias Eolicas Europeas Holding SA | Open Energy Information  

Open Energy Info (EERE)

Place Spain Sector Wind energy Product Spain-based, company involved in the promotion of wind farms, industrial machinery and equipment. Energias Eolicas Europeas Holding SA...

108

Accent Energy Holdings, LLC (New York) | Open Energy Information  

Open Energy Info (EERE)

LLC (New York) Jump to: navigation, search Name Accent Energy Holdings, LLC Place New York Utility Id 54872 References EIA Form EIA-861 Final Data File for 2010 -...

109

The Particle Adventure | What holds it together? | Gravity  

NLE Websites -- All DOE Office Websites (Extended Search)

holds it together? > Gravity Gravity What about gravity? Gravity is weird. It is clearly one of the fundamental interactions, but the Standard Model cannot satisfactorily explain...

110

Blue Crane Holdings Pvt Ltd | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name Blue Crane Holdings Pvt. Ltd. Place Mumbai, Maharashtra, India Zip 400023 Sector Efficiency, Solar, Wind energy Product Mumbai-based firm involved...

111

NNSA, Rosatom, UK Ministry of Defence Hold Trilateral Nuclear...  

NLE Websites -- All DOE Office Websites (Extended Search)

NNSA, Rosatom, UK Ministry of Defence Hold Trilateral Nuclear Security Best Practices Workshop | National Nuclear Security Administration Our Mission Managing the Stockpile...

112

NNSA Acting Administrator Bruce Held holds all hands meeting...  

NLE Websites -- All DOE Office Websites (Extended Search)

NNSA Acting Administrator Bruce Held holds all hands meeting | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the...

113

China Solar Energy Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

Ltd Jump to: navigation, search Name China Solar Energy Holdings Ltd Place Wan Chai, Hong Kong Sector Solar Product Supplies turnkey manufacturing lines for the production of...

114

Effect of Powder Compact Holding Time on the Microstructure and ...  

Science Conference Proceedings (OSTI)

The microstructure and mechanical properties of Ti-6Al-4V alloy and the effects of powder compact holding time on them were investigated. The results showed...

115

Yonghua Solar Power Investment Holding Ltd | Open Energy Information  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Yonghua Solar Power Investment Holding Ltd Jump to: navigation, search Name Yonghua Solar Power...

116

China Singyes Solar Technologies Holdings Ltd formerly known...  

Open Energy Info (EERE)

Ltd formerly known as Singyes Curtain Wall Engineering Jump to: navigation, search Name China Singyes Solar Technologies Holdings Ltd (formerly known as Singyes Curtain Wall...

117

China Power International New Energy Holding Ltd | Open Energy...  

Open Energy Info (EERE)

New Energy Holding Ltd Place Shanghai Municipality, China Zip 200052 Sector Biomass, Hydro, Solar, Wind energy Product A project developer in solar, wind, biomass and...

118

TODAY: Secretary Chu and GM to Hold Conference Call with Virginia Tech |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TODAY: Secretary Chu and GM to Hold Conference Call with Virginia TODAY: Secretary Chu and GM to Hold Conference Call with Virginia Tech TODAY: Secretary Chu and GM to Hold Conference Call with Virginia Tech June 17, 2011 - 12:00am Addthis Washington, D.C. - Today, Energy Secretary Steven Chu will join Kent Helfrich, Executive Director of electronic controls and software at General Motors (GM), on a conference call to congratulate Virginia Tech as the overall winners of EcoCAR: The NeXt Challenge. Students from Virginia Tech will join the call to discuss the real world experience they gained in the program and the winning fuel-efficient vehicle they designed and built. Sixteen schools competed in the EcoCAR: The NeXt Challenge, a three-year collegiate student engineering competition - sponsored by the Department of Energy and GM - that focuses on advanced vehicle technologies that minimize

119

A semi-custom dual channel peak hold circuit for spaceborne instrumentation  

Science Conference Proceedings (OSTI)

A monolithic dual channel peak hold circuit is developed using a semi-custom Application Specific Integrated Circuit (ASIC). The circuit is designed specifically for spaceborne instrumentation that requires low power operation and low mass packaging. Each independent circuit holds positive pulses and consists of a differential transconductance amplifier followed by a one way current amplifier. Input gate and output hold functions are enabled by standard TTL or CMOS logic levels. To accommodate a range of applications. quiescent power is adjustable for performance-power tradeoff or can be disabled for single channel use. Fabricated with dielectrically isolated vertical geometry NPN and PNP transistors the circuit is inherently radiation-hard and immune to transient upset.

Sweet, M.R.; Grace, K.M.

1992-01-01T23:59:59.000Z

120

A semi-custom dual channel peak hold circuit for spaceborne instrumentation  

SciTech Connect

A monolithic dual channel peak hold circuit is developed using a semi-custom Application Specific Integrated Circuit (ASIC). The circuit is designed specifically for spaceborne instrumentation that requires low power operation and low mass packaging. Each independent circuit holds positive pulses and consists of a differential transconductance amplifier followed by a one way current amplifier. Input gate and output hold functions are enabled by standard TTL or CMOS logic levels. To accommodate a range of applications. quiescent power is adjustable for performance-power tradeoff or can be disabled for single channel use. Fabricated with dielectrically isolated vertical geometry NPN and PNP transistors the circuit is inherently radiation-hard and immune to transient upset.

Sweet, M.R.; Grace, K.M.

1992-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Renegy Holdings Inc Formerly Catalytica Energy Systems Inc | Open Energy  

Open Energy Info (EERE)

Catalytica Energy Systems Inc Catalytica Energy Systems Inc Jump to: navigation, search Name Renegy Holdings Inc (Formerly Catalytica Energy Systems Inc) Place Tempe, Arizona Zip 85281 Sector Biomass Product Their primary focus has become to be a top North American producer of biomass-derived electricity using wood waste. References Renegy Holdings Inc (Formerly Catalytica Energy Systems Inc)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Renegy Holdings Inc (Formerly Catalytica Energy Systems Inc) is a company located in Tempe, Arizona . References ↑ "Renegy Holdings Inc (Formerly Catalytica Energy Systems Inc)" Retrieved from "http://en.openei.org/w/index.php?title=Renegy_Holdings_Inc_Formerly_Catalytica_Energy_Systems_Inc&oldid=350290"

122

Covered Product Category: Hot Food Holding Cabinets | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Hot Food Holding Cabinets Hot Food Holding Cabinets Covered Product Category: Hot Food Holding Cabinets October 7, 2013 - 11:08am Addthis ENERGY STAR Qualified Products FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including hot food holding cabinets, which are covered by the ENERGY STAR® program. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Manufacturers display the ENERGY STAR label on complying models. For a model not displaying the label, check the qualified products lists maintained on the ENERGY STAR website. This product category overview covers the following: Meeting Energy Efficiency Requirements

123

Nippon Mining Holdings Inc aka Shinnikko | Open Energy Information  

Open Energy Info (EERE)

Mining Holdings Inc aka Shinnikko Mining Holdings Inc aka Shinnikko Jump to: navigation, search Name Nippon Mining Holdings Inc (aka Shinnikko) Place Tokyo, Japan Zip 105-0001 Product Japanese holding company engaged in oil, metals, and electronics businesses. Coordinates 35.670479°, 139.740921° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.670479,"lon":139.740921,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

124

SEC HoldCo SA | Open Energy Information  

Open Energy Info (EERE)

and ownership of wind farms. References SEC HoldCo SA1 LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now This article is a stub. You can help OpenEI...

125

Innolas Holding GmbH | Open Energy Information  

Open Energy Info (EERE)

Zip D 82152 Sector Solar Product Manufactures equipment to produce crystalline silicon solar cells, thin film panels and wafers. References Innolas Holding GmbH1 LinkedIn...

126

First look at cellulose's early production could hold keys to...  

NLE Websites -- All DOE Office Websites (Extended Search)

cellulose's early production could hold keys to bacteria-free medical devices, better biofuel By Jared Sagoff * May 14, 2013 Tweet EmailPrint Produced by plants as well as algae...

127

Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Design of a Multithreaded Barnes-Hut Algorithm for Multicore Clusters Technical Report Junchao Zhang and Babak Behzad Department of Computer Science, University of Illinois at Urbana-Champaign {jczhang, bbehza2}@illinois.edu Marc Snir Department of Computer Science, University of Illinois at Urbana-Champaign and MCS Division, Argonne National Laboratory snir@anl.gov Abstract We describe in this paper an implementation of the Barnes-Hut al- gorithm on multicore clusters. Based on a partitioned global ad- dress space (PGAS) library, the design integrates intranode mul- tithreading and internode one-sided communication, exemplifying a PGAS + X programming style. Within a node, the computation is decomposed into tasks (subtasks), and multitasking is used to hide network latency. We study the tradeoffs between locality in private caches and locality in shared caches

128

Global Energy Holdings Group formerly Xethanol Corporation | Open Energy  

Open Energy Info (EERE)

Holdings Group formerly Xethanol Corporation Holdings Group formerly Xethanol Corporation Jump to: navigation, search Name Global Energy Holdings Group (formerly Xethanol Corporation) Place Atlanta, Georgia Zip 30326 Sector Biomass Product Focuses on the emerging cellulosic biomass-to-ethanol industry. Coordinates 33.748315°, -84.391109° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.748315,"lon":-84.391109,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

129

GNEP Nations Hold Infrastructure Development Working Group Meeting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GNEP Nations Hold Infrastructure Development Working Group Meeting GNEP Nations Hold Infrastructure Development Working Group Meeting GNEP Nations Hold Infrastructure Development Working Group Meeting December 10, 2008 - 5:11pm Addthis WASHINGTON, DC - Representatives from the U.S. Department of Energy (DOE) participated this week in the third Global Nuclear Energy Partnership (GNEP) Infrastructure Development Working Group (IDWG), underscoring the Department's commitment to ensuring that global expansion of civilian nuclear power is done safely and securely, while reducing the risk of nuclear proliferation and responsibly managing waste. The IDWG, held December 8th and 9th in Vienna, Austria, includes over 70 participants from 22 countries working to support the sharing of educational resources, the promotion of technical educational opportunities and the establishment of

130

Nobao Renewable Energy Holdings Ltd | Open Energy Information  

Open Energy Info (EERE)

Nobao Renewable Energy Holdings Ltd Nobao Renewable Energy Holdings Ltd Jump to: navigation, search Name Nobao Renewable Energy Holdings Ltd Place Shanghai, Shanghai Municipality, China Zip 201103 Sector Geothermal energy Product China-based geothermal heat pump provider. Coordinates 31.247709°, 121.472618° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.247709,"lon":121.472618,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

131

NNSA Holds Groundbreaking at MOX Facility | National Nuclear Security  

National Nuclear Security Administration (NNSA)

Groundbreaking at MOX Facility | National Nuclear Security Groundbreaking at MOX Facility | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > About Us > Our History > NNSA Timeline > NNSA Holds Groundbreaking at MOX Facility NNSA Holds Groundbreaking at MOX Facility October 14, 2005 Aiken, SC NNSA Holds Groundbreaking at MOX Facility

132

International Framework for Nuclear Energy Cooperation to Hold  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Framework for Nuclear Energy Cooperation to Hold Framework for Nuclear Energy Cooperation to Hold Ministerial-Level Meeting Sept. 29 in Warsaw, Poland International Framework for Nuclear Energy Cooperation to Hold Ministerial-Level Meeting Sept. 29 in Warsaw, Poland September 6, 2011 - 3:10pm Addthis Washington, D.C. - The U.S. Department of Energy today announced that Deputy Secretary of Energy Daniel Poneman will lead the U.S. delegation to the International Framework for Nuclear Energy Cooperation (IFNEC) Executive Committee Meeting on Sept. 29 in Warsaw, Poland. The ministerial-level conference aims to advance cooperation among participating states to support the peaceful use of nuclear energy in a manner that meets high standards of safety, security and nonproliferation. The meeting will also feature video remarks by Microsoft founder Bill

133

GNEP Nations Hold Infrastructure Development Working Group Meeting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

GNEP Nations Hold Infrastructure Development Working Group Meeting GNEP Nations Hold Infrastructure Development Working Group Meeting GNEP Nations Hold Infrastructure Development Working Group Meeting December 10, 2008 - 5:11pm Addthis WASHINGTON, DC - Representatives from the U.S. Department of Energy (DOE) participated this week in the third Global Nuclear Energy Partnership (GNEP) Infrastructure Development Working Group (IDWG), underscoring the Department's commitment to ensuring that global expansion of civilian nuclear power is done safely and securely, while reducing the risk of nuclear proliferation and responsibly managing waste. The IDWG, held December 8th and 9th in Vienna, Austria, includes over 70 participants from 22 countries working to support the sharing of educational resources, the promotion of technical educational opportunities and the establishment of

134

National Air & Space Intelligence Center Holds Program About Empowering  

NLE Websites -- All DOE Office Websites (Extended Search)

National Air & Space Intelligence Center Holds Program About National Air & Space Intelligence Center Holds Program About Empowering Women in the Workplace National Air & Space Intelligence Center Holds Program About Empowering Women in the Workplace September 30, 2013 - 4:52pm Addthis Dot Harris, Director of the Office of Economic Impact and Diversity, speaks with Aurea Rivera, President and CEO of Imagineering Results Analysis Corp., Kathleen Tucker, Director of the Information Exploitation Squadron, Global Exploitation Intelligence Group, NAISC, and Ann Carbonell, Chief of the National Geospatial Intelligence Agency Support Team in September 2013. Photo by National Air and Space Intelligence Center. Dot Harris, Director of the Office of Economic Impact and Diversity, speaks with Aurea Rivera, President and CEO of Imagineering Results Analysis

135

ScottishPower Renewable Energy Holdings | Open Energy Information  

Open Energy Info (EERE)

ScottishPower Renewable Energy Holdings ScottishPower Renewable Energy Holdings Jump to: navigation, search Name ScottishPower Renewable Energy Holdings Place Glasgow, Scotland, United Kingdom Zip G2 8SP Sector Wind energy Product Developer & owner of wind energy generation assets in both the UK & US. Coordinates 55.857809°, -4.242511° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.857809,"lon":-4.242511,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

136

PPL Energy Services Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

Energy Services Holdings LLC Energy Services Holdings LLC Jump to: navigation, search Name PPL Energy Services Holdings LLC Place Allentown, Pennsylvania Zip 18101 Product Focused developing and owning energy generation assets. Coordinates 40.60257°, -75.470204° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.60257,"lon":-75.470204,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

137

International Framework for Nuclear Energy Cooperation to Hold  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Framework for Nuclear Energy Cooperation to Hold International Framework for Nuclear Energy Cooperation to Hold Ministerial-Level Meeting Sept. 29 in Warsaw, Poland International Framework for Nuclear Energy Cooperation to Hold Ministerial-Level Meeting Sept. 29 in Warsaw, Poland September 6, 2011 - 3:23pm Addthis Washington, D.C. - The U.S. Department of Energy today announced that Deputy Secretary of Energy Daniel Poneman will lead the U.S. delegation to the International Framework for Nuclear Energy Cooperation (IFNEC) Executive Committee Meeting on Sept. 29 in Warsaw, Poland. The ministerial-level conference aims to advance cooperation among participating states to support the peaceful use of nuclear energy in a manner that meets high standards of safety, security and nonproliferation. The meeting will also feature video remarks by Microsoft founder Bill

138

PARS II On Hold Projects, V-2013-04-02 Page 1 PARS II Process...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document ON HOLD PROJECTS - Place On Hold, Re-Activate, and Cancel PURPOSE The purpose of this document is to describe the...

139

Effects of Financial Holding Company Act on bank efficiency and productivity in Taiwan  

Science Conference Proceedings (OSTI)

Taiwan's banking industry has experienced greatly structural changes since the implementing of Financial Holding Company Act in July 2001. The paper investigates whether Taiwan's commercial banks establishing or joining in financial holding companies ... Keywords: Efficiency, Financial holding companies, Productivity change

Chei-Chang Chiou

2009-10-01T23:59:59.000Z

140

The Particle Adventure | What holds it together? | Strong  

NLE Websites -- All DOE Office Websites (Extended Search)

The Standard Model > What holds it together? > Strong The Standard Model > What holds it together? > Strong Strong To understand what is happening inside the nucleus, we need to understand more about the quarks that make up the protons and neutrons in the nucleus. Quarks have electromagnetic charge, and they also have an altogether different kind of charge called color charge. The force between color-charged particles is very strong, so this force is "creatively" called The strong force holds quarks together to form hadrons, so its carrier particles are whimsically called gluons because they so tightly "glue" quarks together. (Other name candidates included the "hold-on," the "duct-tape-it-on," and the "tie-it-on!") Color charge behaves differently than electromagnetic charge. Gluons, themselves, have color charge, which is weird and not at all like photons which do not have electromagnetic charge. And while quarks have color charge, composite particles made out of quarks have no net color charge (they are color neutral). For this reason, the strong force only takes place on the really small level of quark interactions, which is why you are not aware of the strong force in your everyday life

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Updated: September, 2012 Intent to Hold FPM Course/Test  

E-Print Network (OSTI)

Updated: September, 2012 FORM A Intent to Hold FPM Course/Test Which course are you conducting? (check only one) 2-day course 1-day course Test only Re-Test only Test & Re-Test Food Handlers What date(s) are you conducting the training/testing? ______________________________ (mm

142

Apparatus for removably holding a plurality of microballoons  

DOE Patents (OSTI)

The present invention relates generally to the manipulation of microballoons and more particularly to an apparatus for removably holding a plurality of microballoons in order to more efficiently carry out the filling of the microballoons with a known quantity of gas.

Jorgensen, B.S.

1984-06-05T23:59:59.000Z

143

Compliance Certification Enforcement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

April 26, 2010 April 26, 2010 EZ-FLO International: Order (2010-CW-1401) DOE ordered EZ-FLO International, Inc. to pay a $20,000 civil penalty after finding EZ-FLO had failed to certify that certain models of showerhead comply with the applicable water conservation standard. April 26, 2010 Zoe Industries: Order (2010-CW-1405) DOE ordered Zoe Industries, Inc. to pay a $5,000 civil penalty after finding Zoe had failed to certify that certain models of showerheads comply with the applicable water conservation standards. April 21, 2010 Watermark Designs: Order (2010-CW-1404) DOE ordered Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd. to pay a $135,104 civil penalty after finding Watermark Designs had failed to certify that various models of showerheads comply with the applicable

144

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

61 - 8270 of 26,764 results. 61 - 8270 of 26,764 results. Download September 2012 APM Newsletter http://energy.gov/management/downloads/september-2012-apm-newsletter Download YMGI: Order (2011-SCE-1605) DOE ordered YMGI Group LLC to pay a $31,400 civil penalty after finding (1) YMGI had failed to certify that certain models of residential central air conditioners comply with the applicable energy conservation standards and (2) YMGI had distributed in commerce model TTWC-18K-31B, a through-the-wall air conditioner that does not meet the applicable energy conservation standard. http://energy.gov/gc/downloads/ymgi-order-2011-sce-1605 Download Watermark Designs: Order (2010-CW-1404) DOE ordered Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd. to pay a $135,104 civil penalty after finding Watermark Designs had failed

145

Page not found | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

21 - 17630 of 28,905 results. 21 - 17630 of 28,905 results. Download Before the House Energy and Commerce Subcommittee on Energy and Power Subject: Alternative Transportation Fuels and Vehicles By: Howard Gruenspecht, Deputy Administrator Energy Information Administration http://energy.gov/congressional/downloads/house-energy-and-commerce-subcommittee-energy-and-power-2 Download FOA_FAQ.pdf http://energy.gov/pi/office-policy-and-international-affairs/downloads/foafaqpdf Download Audit Report: IG-0452 Nuclear Material Protection, Control, and Accounting Program http://energy.gov/ig/downloads/audit-report-ig-0452 Download Watermark Designs: Order (2010-CW-1404) DOE ordered Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd. to pay a $135,104 civil penalty after finding Watermark Designs had failed

146

Questions and Answers - What holds an electron revolving around the  

NLE Websites -- All DOE Office Websites (Extended Search)

do I read an electronconfiguration table? do I read an electron<br>configuration table? Previous Question (How do I read an electron configuration table?) Questions and Answers Main Index Next Question (What keeps electrons revolving around the nucleus of an atom?) What keeps electrons revolvingaround the nucleus of an atom? What holds an electron revolving around the nucleus? Why don't they just go zooming around everywhere? What causes the force that holds atoms together? The answer is electricity and magnetism. The atom's center, or nucleus, is positively charged and the electrons that whirl around this nucleus are negatively charged, so they attract each other. The reason the force is strong is because the atom is so small. The distance between the nucleus and the electrons is about 1

147

The Particle Adventure | What holds it together? | Quarks emit gluons  

NLE Websites -- All DOE Office Websites (Extended Search)

holds it together? > Quarks emit gluons holds it together? > Quarks emit gluons Quarks emit gluons Color charge is always conserved. When a quark emits or absorbs a gluon, that quark's color must change in order to conserve color charge. For example, suppose a red quark changes into a blue quark and emits a red/antiblue gluon (the image below illustrates antiblue as yellow). The net color is still red. This is because - after the emission of the gluon - the blue color of the quark cancels with the antiblue color of the gluon. The remaining color then is the red color of the gluon. Quarks emit and absorb gluons very frequently within a hadron, so there is no way to observe the color of an individual quark. Within a hadron, though, the color of the two quarks exchanging a gluon will change in a way that keeps the bound system in a color-neutral state.

148

Public Utility Holding Company Act of 1935: 1935-1992  

Reports and Publications (EIA)

This report provides an economic and legislative history and analysis of the Public Utilities Holding Company Act (PUHCA) of 1935. This Act was substantially amended for the first time in 1992 by passage of the Energy Policy Act (EPACT). The report also includes a discussion of the issues which led to the amendment of PUHCA and projections of the impact of these changes on the electric industry.

Information Center

1993-01-01T23:59:59.000Z

149

Net Power Technology NP Holdings or NPH | Open Energy Information  

Open Energy Info (EERE)

Net Power Technology NP Holdings or NPH Net Power Technology NP Holdings or NPH Jump to: navigation, search Name Net Power Technology (NP Holdings or NPH) Place Chanchun, Jilin Province, China Sector Efficiency, Renewable Energy Product China-based company, focused on electricity storage systems based on zinc-bromide redox flow cells for renewable energy and energy efficiency applications. Coordinates 40.911701°, 45.354198° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.911701,"lon":45.354198,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

150

The Particle Adventure | What holds it together? | The four interactions  

NLE Websites -- All DOE Office Websites (Extended Search)

The Standard Model > What holds it together? > The four interactions The Standard Model > What holds it together? > The four interactions The four interactions Now we think we have a good idea of what the world is made of: quarks and leptons. So... What holds it together? The universe, which we know and love, exists because the fundamental particles interact. These interactions include attractive and repulsive forces, decay, and annihilation. There are four fundamental interactions between particles, and all forces in the world can be attributed to these four interactions! That's right: Any force you can think of -- friction, magnetism, gravity, nuclear decay, and so on -- is caused by one of these four fundamental interactions. What's the difference between a force and an interaction? This is a hard distinction to make. Strictly speaking, a force is the effect on a particle due to the presence of other particles. The interactions of a particle include all the forces that affect it, but also include decays and annihilations that the particle might go through. (We will spend the next chapter discussing these decays and annihilations in more depth.)

151

GCL Solar Energy Technology Holdings formerly GCL Silicon aka Jiangsu  

Open Energy Info (EERE)

Solar Energy Technology Holdings formerly GCL Silicon aka Jiangsu Solar Energy Technology Holdings formerly GCL Silicon aka Jiangsu Zhongneng Polysilicon Jump to: navigation, search Name GCL Solar Energy Technology Holdings (formerly GCL Silicon, aka Jiangsu Zhongneng Polysilicon) Place Xuzhou, Jiangsu Province, China Zip 221131 Sector Solar Product China-based solar grade polysilicon producer. Coordinates 34.255489°, 117.190201° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":34.255489,"lon":117.190201,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

152

China Singyes Solar Technologies Holdings Ltd formerly known as Singyes  

Open Energy Info (EERE)

Singyes Solar Technologies Holdings Ltd formerly known as Singyes Singyes Solar Technologies Holdings Ltd formerly known as Singyes Curtain Wall Engineering Jump to: navigation, search Name China Singyes Solar Technologies Holdings Ltd (formerly known as Singyes Curtain Wall Engineering) Place Zhuhai, Guangdong Province, China Sector Solar Product The company China Singyes is a curtain wall engineering company that has partnered with Solar Thin Films to build solar module capacity in China for the domestic BIPV market. Coordinates 22.277°, 113.556808° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":22.277,"lon":113.556808,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

153

Gamesa Energie Deutschland formerly EBV Management Holding AG | Open Energy  

Open Energy Info (EERE)

Deutschland formerly EBV Management Holding AG Deutschland formerly EBV Management Holding AG Jump to: navigation, search Name Gamesa Energie Deutschland (formerly EBV Management Holding AG) Place Oldenburg, Germany Zip 26122 Sector Wind energy Product German wind farm developer focused on developing and constructing wind farms in prepration for a sale to third party investors on commissioning. Coordinates 53.138699°, 8.21144° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":53.138699,"lon":8.21144,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

154

Public Utility Holding Company Act of 1935: 1935--1992  

SciTech Connect

This report provides an economic and legislative history and analysis of the Public Utilities Holding Company Act (PUHCA) of 1935. This Act was substantially amended for the first time in 1992 by passage of the Energy Policy Act (EPACT). The report also includes a discussion of the issues which led to the amendment of PUHCA and projections of the impact of these changes on the electric industry. The report should be of use to Federal and State regulators, trade associations, electric utilities, independent power producers, as well as decision-makers in Congress and the Administration.

Not Available

1993-01-15T23:59:59.000Z

155

The Particle Adventure | What holds it together? | The unseen effect  

NLE Websites -- All DOE Office Websites (Extended Search)

The Standard Model > What holds it together? > The unseen effect The Standard Model > What holds it together? > The unseen effect The unseen effect You can think about forces as being analogous to the following situation: Two people are standing on an ice pond. One person moves their arm and is pushed backwards; a moment later the other person grabs at an invisible object and is driven backwards. Even though you cannot see a basketball, you can assume that one person threw a basketball to the other person because you see its effect on the people. (Click on the checkmark or cross below the animation in order to make the basketball appear or disappear.) It turns out that all interactions which affect matter particles are due to an exchange of force carrier particles, a different type of particle altogether. These particles are like basketballs tossed between matter particles (which are like the basketball players). What we normally think of as "forces" are actually the effects of force carrier particles on matter particles.

156

The Particle Adventure | What holds it together? | Color charge  

NLE Websites -- All DOE Office Websites (Extended Search)

The Standard Model > What holds it together? > Color charge The Standard Model > What holds it together? > Color charge Color charge Quarks and gluons are color-charged particles. Just as electrically-charged particles interact by exchanging photons in electromagnetic interactions, color-charged particles exchange gluons in strong interactions. When two quarks are close to one another, they exchange gluons and create a very strong color force field that binds the quarks together. The force field gets stronger as the quarks get further apart. Quarks constantly change their color charges as they exchange gluons with other quarks. How does color charge work? There are three color charges and three corresponding anticolor (complementary color) charges. Each quark has one of the three color charges and each antiquark has one of the three anticolor charges. Just as a mix of red, green, and blue light yields white light, in a baryon a combination of "red," "green," and "blue" color charges is color neutral, and in an antibaryon "antired," "antigreen," and "antiblue" is also color neutral. Mesons are color neutral because they carry combinations such as "red" and "antired."

157

PARS II On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

On Hold Projects, V-2013-04-02 Page 1 On Hold Projects, V-2013-04-02 Page 1 PARS II Process Document ON HOLD PROJECTS - Place On Hold, Re-Activate, and Cancel PURPOSE The purpose of this document is to describe the process of placing active pre CD-2 capital asset projects on hold, removing projects from hold through re-activation or cancellation, and reporting of these projects in PARS II. SCOPE This process applies to active pre CD-2 capital asset projects and On Hold Pre CD-2 Capital Asset Projects only that were identified by the project team and approved by Acquisition Executive (AE), or Secretarial Acquisition Executive (SAE) for Major Systems Projects, as on hold. PROCESS The goal of the process is to ensure adherence to rules identified by Change Review Board (CRB) for placing

158

SunE U6 Holdings LLC (Colorado) | Open Energy Information  

Open Energy Info (EERE)

U6 Holdings LLC (Colorado) Jump to: navigation, search Name SunE U6 Holdings LLC Place Colorado Utility Id 56431 References EIA Form EIA-861 Final Data File for 2010 -...

159

GRR/Elements/18-CA-c.14 - Allow Public Comment and Hold Hearing...  

Open Energy Info (EERE)

and Hold Hearing DTSC allows for a 45 day public comment period on the Draft Hazardous Waste Facility Permit and holds a public hearing. Retrieved from "http:en.openei.orgw...

160

High speed, low power 100 MS/s front end track-and-hold amplifier for ten-bit pipelined ADC  

Science Conference Proceedings (OSTI)

The work focuses on the design of a high speed, low power track-and-hold amplifier (THA) for ten-bit 100 MS/s pipelined analogue-to-digital converter (ADC). A wide bandwidth and high gain two-stage ... Keywords: #, 47, CMFB, HPSA, MDAC, MHz, MS&, amplifier design, common-mode feedback, digital to analogue converters, high-performance systems architecture, hold amplifiers, mega samples per second, megahertz, multiplying DAC, nanometres, nm, operational transconductance amplifiers, peak, peak-to-, s, switched capacitors, track-and-

D. Meganathan; Raja Paul Perinbam; R. Deepalakshmi

2009-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Los Alamos Biosafety committee will hold meeting June 10  

NLE Websites -- All DOE Office Websites (Extended Search)

Biosafety committee meeting June 10 Biosafety committee meeting June 10 Los Alamos Biosafety Committee will hold meeting June 10 The committee is responsible for reviewing and approving all proposals, activities, and experiments involving an organism or product of an organism that presents a risk to humans. June 5, 2008 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

162

The Particle Adventure | What holds it together? | Quark confinement  

NLE Websites -- All DOE Office Websites (Extended Search)

Quark confinement Quark confinement Quark confinement Color-charged particles cannot be found individually. For this reason, the color-charged quarks are confined in groups (hadrons) with other quarks. These composites are color neutral. The development of the Standard Model's theory of the strong interactions reflected evidence that quarks combine only into baryons (three quark objects), and mesons (quark-antiquark objects), but not, for example, four-quark objects. Now we understand that only baryons (three different colors) and mesons (color and anticolor) are color-neutral. Particles such as ud or uddd that cannot be combined into color-neutral states are never observed. Color-Force Field The quarks in a given hadron madly exchange gluons. For this reason, physicists talk about the color-force field which consists of the gluons holding the bunch of quarks together.

163

New Generation Biofuels Holdings Inc formerly H2Diesel | Open Energy  

Open Energy Info (EERE)

Generation Biofuels Holdings Inc formerly H2Diesel Generation Biofuels Holdings Inc formerly H2Diesel Jump to: navigation, search Name New Generation Biofuels Holdings Inc. (formerly H2Diesel) Place Lake Mary, Florida Zip 32746 Product Florida-based developer of innovative biodiesel projects and technologies. References New Generation Biofuels Holdings Inc. (formerly H2Diesel)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. New Generation Biofuels Holdings Inc. (formerly H2Diesel) is a company located in Lake Mary, Florida . References ↑ "New Generation Biofuels Holdings Inc. (formerly H2Diesel)" Retrieved from "http://en.openei.org/w/index.php?title=New_Generation_Biofuels_Holdings_Inc_formerly_H2Diesel&oldid=349166"

164

Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto  

NLE Websites -- All DOE Office Websites (Extended Search)

6: January 3, 6: January 3, 2011 Consumers Hold onto Vehicles Longer to someone by E-mail Share Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on Facebook Tweet about Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on Twitter Bookmark Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on Google Bookmark Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on Delicious Rank Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on Digg Find More places to share Vehicle Technologies Office: Fact #656: January 3, 2011 Consumers Hold onto Vehicles Longer on AddThis.com...

165

BioCentric Energy Inc formerly Nano Chemical Systems Holdings | Open Energy  

Open Energy Info (EERE)

BioCentric Energy Inc formerly Nano Chemical Systems Holdings BioCentric Energy Inc formerly Nano Chemical Systems Holdings Jump to: navigation, search Name BioCentric Energy Inc (formerly Nano Chemical Systems Holdings) Place Santa Ana, California Zip 90707 Product California-based development-stage company that manufactures and sells closed-loop photobioreactor systems for growing algae. References BioCentric Energy Inc (formerly Nano Chemical Systems Holdings)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. BioCentric Energy Inc (formerly Nano Chemical Systems Holdings) is a company located in Santa Ana, California . References ↑ "BioCentric Energy Inc (formerly Nano Chemical Systems Holdings)" Retrieved from

166

Voltage holding study of 1 MeV accelerator for ITER neutral beam injector  

Science Conference Proceedings (OSTI)

Voltage holding test on MeV accelerator indicated that sustainable voltage was a half of that of ideal quasi-Rogowski electrode. It was suggested that the emission of the clumps is enhanced by a local electric field concentration, which leads to discharge initiation at lower voltage. To reduce the electric field concentration in the MeV accelerator, gaps between the grid supports were expanded and curvature radii at the support corners were increased. After the modifications, the accelerator succeeded in sustaining -1 MV in vacuum without beam acceleration. However, the beam energy was still limited at a level of 900 keV with a beam current density of 150 A/m{sup 2} (346 mA) where the 3 x 5 apertures were used. Measurement of the beam profile revealed that deflection of the H{sup -} ions was large and a part of the H{sup -} ions was intercepted at the acceleration grid. This causes high heat load on the grids and the breakdowns during beam acceleration. To suppress the direct interception, new grid system was designed with proper aperture displacement based on a 3D beam trajectory analysis. As the result, the beam deflection was compensated and the voltage holding during the beam acceleration was improved. Beam parameter of the MeV accelerator was increased to 980 keV, 185 A/m{sup 2} (427 mA), which is close to the requirement of ITER accelerator (1 MeV, 200 A/m{sup 2}).

Taniguchi, M.; Kashiwagi, M.; Umeda, N.; Dairaku, M.; Takemoto, J.; Tobari, H.; Tsuchida, K.; Yamanaka, H.; Watanabe, K.; Kojima, A.; Hanada, M.; Sakamoto, K.; Inoue, T. [Japan Atomic Energy Agency (JAEA), 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2012-02-15T23:59:59.000Z

167

Apparatus and method for generating a magnetic field by rotation of a charge holding object  

DOE Patents (OSTI)

A device and a method for the production of a magnetic field using a Charge Holding Object that is mechanically rotated. In a preferred embodiment, a Charge Holding Object surrounding a sample rotates and subjects the sample to one or more magnetic fields. The one or more magnetic fields are used by NMR Electronics connected to an NMR Conductor positioned within the Charge Holding Object to perform NMR analysis of the sample.

Gerald, II, Rex E. (Brookfield, IL); Vukovic, Lela (Westchester, IL); Rathke, Jerome W. (Homer Glenn, IL)

2009-10-13T23:59:59.000Z

168

Holding of juvenile salmonids for surgical implantation of electronic tags: a review and recommendations  

SciTech Connect

Many telemetry based studies require that fish be sampled from the wild and then held for some amount of time both prior to and after the implantation of a transmitter. However, the effects of such holding (or the lack thereof) are often overlooked. Pre-surgical holding often occurs to facilitate logistical needs of research projects and as an attempt to minimize negative physiological effects due to capture and handling stress. Further, post-surgical holding time and conditions greatly influence the physiological state of fish prior to being returned to the wild. This paper reviews pertinent studies pertaining to the effects of surgical holding on the behavior, physiology, and survival of fishes, with particular emphasis on juvenile salmonids. The effects of individual aspects of surgical holding such as stressors, time, holding conditions and water quality are also examined. Recommendations regarding certain aspects of surgical holding (e.g., holding duration) are offered with a goal of reducing bias related to the surgical process. Pre- and post-surgical holding times of 1836 h are suggested as a general guideline for juvenile salmonids.

Oldenburg, Eric W.; Colotelo, Alison HA; Brown, Richard S.; Eppard, M. B.

2011-01-01T23:59:59.000Z

169

NIST to Hold Public Meeting on WTC Investigation in NYC on ...  

Science Conference Proceedings (OSTI)

NIST to Hold Public Meeting on WTC Investigation in NYC on February 12. ... specific technical aspects of the individual projects as reported in our ...

2011-10-11T23:59:59.000Z

170

US, China Hold Joint Meeting to Discuss Peaceful Uses of Nuclear...  

National Nuclear Security Administration (NNSA)

China Hold Joint Meeting to Discuss Peaceful Uses of Nuclear Technology | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation...

171

10:30AM TODAY: Senior Administration Officials to Hold a Background...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Administration Officials will hold a background conference call regarding the ongoing oil supply disruptions in the Middle East and North Africa and the announcement this...

172

Texas Tech University Upward Bound Programs WAIVER OF LIABILITY AND HOLD HARMLESS AGREEMENT  

E-Print Network (OSTI)

Texas Tech University Upward Bound Programs WAIVER OF LIABILITY AND HOLD HARMLESS AGREEMENT's participation in Texas Tech University Upward Bound Programs, I hereby RELEASE, WAIVE, DISCHARGE, and HOLD HARMLESS Tech University Upward Bound Programs, Texas Tech University, the Board of Regents, the State

Zhang, Yuanlin

173

T-729: Mozilla Code Installation Through Holding Down Enter | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9: Mozilla Code Installation Through Holding Down Enter 9: Mozilla Code Installation Through Holding Down Enter T-729: Mozilla Code Installation Through Holding Down Enter September 29, 2011 - 8:30am Addthis PROBLEM: Mozilla Code Installation Through Holding Down Enter. PLATFORM: Versions prior to the following are vulnerable: Firefox 7.0 Firefox 3.6.23 Thunderbird 7.0 SeaMonkey 2.4 ABSTRACT: Attackers can exploit this issue by enticing an unsuspecting victim into viewing and interacting with a malicious Web page. An attacker may be able to exploit this issue to bypass a confirmation dialog and install an arbitrary add-on. This may aid in further attacks. reference LINKS: Mozilla Foundation Security Advisory 2011-40 Firefox Security Advisories CVE-2011-2372 CVE-2011-3001 IMPACT ASSESSMENT: High Discussion: If a user holds down the Enter key--as part of a game or test, perhaps--a

174

Voltage holding considerations for direct-collection units  

SciTech Connect

Results have been obtained from initial experiments designed to study high-voltage breakdown under conditions of importance to the design of direct- collection units. A coaxial configuration was used to mock-up critical fields near grid wires. With appropriate heat conditioning, fields as high as 9.6 x 10/ sup 5/ V/cm were maintained at the surface of a 7-mil-diam tungsten wire. This represents an enhanced field of ~10/sup 8/V/cm at whisker'' sites. Breakdown criteria are proposed for three regimes; initial, field-emission, and ultimate, which differ by the amount of prior conditioning applied to the wire. Additional considerations of importance to direct collectors such as the effect of thermionic emission and ion bombardment are discussed. (auth)

Miley, G.H.

1973-12-01T23:59:59.000Z

175

U.S. Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Washington, D.C. 20554 Washington, D.C. 20554 In the Matter of: Watermark Designs Holdings, Ltd. d/b/a Watermark Designs, Ltd., Respondent ORDER By the General Counsel, U.S. Department of Energy: Case Number : 2010-C W-1404 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Watermark Designs, Ltd. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for violations of the compliance certification requirements at 10 C.F.R. § 430.62. 2. The DOE and Respondent have negotiated the terms of the Compromise Agreement that resolve this matter. A copy of the Compromise Agreement is attached hereto and incorporated by reference. 3. After reviewing the terms of the Compromise Agreement and evaluating the

176

NNSA, Rosatom, UK Ministry of Defence Hold Trilateral Nuclear Security Best  

National Nuclear Security Administration (NNSA)

Rosatom, UK Ministry of Defence Hold Trilateral Nuclear Security Best Rosatom, UK Ministry of Defence Hold Trilateral Nuclear Security Best Practices Workshop | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > NNSA, Rosatom, UK Ministry of Defence Hold ... Press Release NNSA, Rosatom, UK Ministry of Defence Hold Trilateral Nuclear Security Best

177

EIS-0465: Pepco Holdings, Inc. Mid-Atlantic Power Path (MAPP) Project,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EIS-0465: Pepco Holdings, Inc. Mid-Atlantic Power Path (MAPP) EIS-0465: Pepco Holdings, Inc. Mid-Atlantic Power Path (MAPP) Project, Prince George's, Calvert, and Wicomico Counties, Maryland, and Sussex County, Delaware EIS-0465: Pepco Holdings, Inc. Mid-Atlantic Power Path (MAPP) Project, Prince George's, Calvert, and Wicomico Counties, Maryland, and Sussex County, Delaware Summary Pepco Holdings, Inc., cancelled its proposed Phase II of the Mid-Atlantic Power Pathway transmission line project and DOE cancelled preparation of an EIS on the potential environmental impacts of a proposed federal loan guarantee for the project. Public Comment Opportunities No public comment opportunities available at this time. Documents Available for Download March 4, 2011 EIS-0465: Notice of Intent to Prepare an Environmental Impact Statement

178

Blue Ribbon Commission on America's Nuclear Future to Hold First Meeting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Blue Ribbon Commission on America's Nuclear Future to Hold First Blue Ribbon Commission on America's Nuclear Future to Hold First Meeting Blue Ribbon Commission on America's Nuclear Future to Hold First Meeting March 3, 2010 - 12:00am Addthis Washington, D.C. - On Thursday, March 25th and Friday, March 26th, the Blue Ribbon Commission on America's Nuclear Future, co-chaired by former Congressman Lee Hamilton and former National Security Advisor General Brent Scowcroft, will hold its first meeting in Washington, D.C. At the direction of President Obama, Secretary of Energy Steven Chu established the Blue Ribbon Commission to conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle and to provide recommendations for developing a safe, long-term solution to managing the Nation's used nuclear fuel and nuclear waste.

179

Secretary Bodman and Pakistan Officials Hold High-Level Energy Meeting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Secretary Bodman and Pakistan Officials Hold High-Level Energy Secretary Bodman and Pakistan Officials Hold High-Level Energy Meeting Secretary Bodman and Pakistan Officials Hold High-Level Energy Meeting March 13, 2006 - 11:48am Addthis Discuss Pakistan's energy opportunities; Follows United States-Pakistan Strategic Partnership launched by President Bush earlier this month WASHINGTON, DC - Energy Secretary Samuel W. Bodman today visited Pakistan, the first stop in his four-nation swing where he will discuss ways that the U.S. and Pakistan can increase cooperation on energy-related issues. The Secretary's visit follows President Bush's pledge earlier this month to hold a high-level meeting between U.S. and Pakistani officials to collaborate on solutions to Pakistan's energy sources. "The U.S. and Pakistan are strong allies and America supports the people of

180

SeaPower Pacific subsidiary of Renewable Energy Holdings Plc Carnegie  

Open Energy Info (EERE)

SeaPower Pacific subsidiary of Renewable Energy Holdings Plc Carnegie SeaPower Pacific subsidiary of Renewable Energy Holdings Plc Carnegie Corporation Ltd Jump to: navigation, search Name SeaPower Pacific subsidiary of Renewable Energy Holdings Plc Carnegie Corporation Ltd Address 1 16 Ord Street PO Box 1902 Place West Perth Zip 6872 Sector Marine and Hydrokinetic Phone number 61 8 9486 4466 Website http://www.carnegiecorp.com.au Region Australia LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This company is listed in the Marine and Hydrokinetic Technology Database. This company is involved in the following MHK Projects: CETO Precommercial Pilot Project This article is a stub. You can help OpenEI by expanding it. Retrieved from "http://en.openei.org/w/index.php?title=SeaPower_Pacific_subsidiary_of_Renewable_Energy_Holdings_Plc_Carnegie_Corporation_Ltd&oldid=67845

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

NOON TODAY: Chu, Psaki to hold Conference Call on President Obama's  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOON TODAY: Chu, Psaki to hold Conference Call on President Obama's NOON TODAY: Chu, Psaki to hold Conference Call on President Obama's Upcoming Events NOON TODAY: Chu, Psaki to hold Conference Call on President Obama's Upcoming Events January 28, 2011 - 12:00am Addthis THE WHITE HOUSE Office of Media Affairs WASHINGTON, DC - Today, Friday, January 28 at noon ET, U.S. Energy Secretary Steven Chu and White House Deputy Director of Communications Jen Psaki will hold a conference call with media to preview President Obama's upcoming events next week, and to discuss the importance of investing in innovation and clean energy to put people back to work, grow the economy, and win the future. WHO: Department of Energy Secretary Steven Chu White House Deputy Director of Communications Jen Psaki WHAT: Conference call with media on the President's upcoming events and the importance of investing in innovation and clean energy

182

10:30AM TODAY: Senior Administration Officials to Hold a Background  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0:30AM TODAY: Senior Administration Officials to Hold a Background 0:30AM TODAY: Senior Administration Officials to Hold a Background Conference Call Regarding Oil 10:30AM TODAY: Senior Administration Officials to Hold a Background Conference Call Regarding Oil June 23, 2011 - 12:00am Addthis WASHINGTON, DC - Today, Thursday, June 23 at 10:30AM ET, Senior Administration Officials will hold a background conference call regarding the ongoing oil supply disruptions in the Middle East and North Africa and the announcement this morning to release oil from the Strategic Petroleum Reserve in coordination with the International Energy Agency. The call will be on background with no embargo. WHO: Senior Administration Officials WHAT: Background conference call WHEN: Thursday, June 23, 2011 10:30AM ET RSVP: Media who want to attend this call should dial (877) 941-1706 and ask to join the "White House call." No passcode is necessary.

183

Department of Energy Will Hold a Batteries and Energy Storage Information  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Will Hold a Batteries and Energy Storage Department of Energy Will Hold a Batteries and Energy Storage Information Meeting on October 21, 2011 Department of Energy Will Hold a Batteries and Energy Storage Information Meeting on October 21, 2011 October 2, 2011 - 11:46am Addthis On Friday, October 21, 2011 the Department of Energy will hold a public meeting from 8:00am to 5:00pm at the Bethesda North Marriott Hotel and Conference Center in Bethesda, MD to provide information and receive comments from the public on directions for a potential research effort on batteries and energy storage. Learn more about this meeting Registration Information Agenda Learn more about OE's Energy Storage program Addthis Related Articles Energy Department Seeks Public Comment on Standby Support Provisions of Energy Policy Act of 2005

184

Offset-free rail-to-rail derandomizing peak detect-and-hold circuit  

Science Conference Proceedings (OSTI)

A peak detect-and-hold circuit eliminates errors introduced by conventional amplifiers, such as common-mode rejection and input voltage offset. The circuit includes an amplifier, three switches, a transistor, and a capacitor. During a detect-and-hold phase, a hold voltage at a non-inverting in put terminal of the amplifier tracks an input voltage signal and when a peak is reached, the transistor is switched off, thereby storing a peak voltage in the capacitor. During a readout phase, the circuit functions as a unity gain buffer, in which the voltage stored in the capacitor is provided as an output voltage. The circuit is able to sense signals rail-to-rail and can readily be modified to sense positive, negative, or peak-to-peak voltages. Derandomization may be achieved by using a plurality of peak detect-and-hold circuits electrically connected in parallel.

DeGeronimo, Gianluigi (Nesconset, NY); O'Connor, Paul (Bellport, NY); Kandasamy, Anand (Coram, NY)

2003-01-01T23:59:59.000Z

185

Voltage holding study of 1 MeV accelerator for ITER neutral beam injectora)  

Science Conference Proceedings (OSTI)

Voltage holding test on MeV accelerator indicated that sustainable voltage was a half of that of ideal quasi-Rogowski electrode. It was suggested that the emission of the clumps is enhanced by a local electric field concentration

M. Taniguchi; M. Kashiwagi; N. Umeda; M. Dairaku; J. Takemoto; H. Tobari; K. Tsuchida; H. Yamanaka; K. Watanabe; A. Kojima; M. Hanada; K. Sakamoto; T. Inoue

2012-01-01T23:59:59.000Z

186

Results Of Routine Strip Effluent Hold Tank, Decontaminated Salt Solution Hold Tank, And Caustic Wash Tank Samples From Modular Caustic-Side Solvent Extraction Unit During Macrobatch 4 Operations  

Science Conference Proceedings (OSTI)

Strip Effluent Hold Tank (SEHT), Decontaminated Salt Solution Hold Tank (DSSHT), and Caustic Wash Tank (CWT) samples from several of the ?microbatches? of Integrated Salt Disposition Project (ISDP) Salt Batch (?Macrobatch?) 4 have been analyzed for {sup 238}Pu, {sup 90}Sr, {sup 137}Cs, and by inductively-coupled plasma emission spectroscopy (ICPES). Furthermore, samples from the CWT have been analyzed by a variety of methods to investigate a decline in the decontamination factor (DF) of the cesium observed at MCU. The results indicate good decontamination performance within process design expectations. While the data set is sparse, the results of this set and the previous set of results for Macrobatch 3 samples indicate generally consistent operations. There is no indication of a disruption in plutonium and strontium removal. The average cesium DF and concentration factor (CF) for samples obtained from Macrobatch 4 are slightly lower than for Macrobatch 3, but still well within operating parameters. The DSSHT samples show continued presence of titanium, likely from leaching of the monosodium titanate in Actinide Removal Process (ARP).

Peters, T. B.; Fink, S. D.

2012-10-25T23:59:59.000Z

187

Jiangsu Linyang Solarfun Co Ltd aka Solarfun Power Holdings | Open Energy  

Open Energy Info (EERE)

Linyang Solarfun Co Ltd aka Solarfun Power Holdings Linyang Solarfun Co Ltd aka Solarfun Power Holdings Jump to: navigation, search Name Jiangsu Linyang Solarfun Co Ltd (aka Solarfun Power Holdings) Place Qidong, Jiangsu Province, China Zip 226200 Product Chinese manufacturer of mono and multicrystalline PV cells and modules. Coordinates 31.811399°, 121.667503° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.811399,"lon":121.667503,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

188

U.S. and India hold the Third Meeting of the Indo-United States Civil  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and India hold the Third Meeting of the Indo-United States and India hold the Third Meeting of the Indo-United States Civil Nuclear Energy Working Group U.S. and India hold the Third Meeting of the Indo-United States Civil Nuclear Energy Working Group March 17, 2010 - 12:54pm Addthis India hosted the third meeting of the Indo-United States Civil Nuclear Energy Working Group in Mumbai, on Feb. 3-4, 2010. Civil nuclear is one of five working groups established under the Energy Dialogue as a result of the 2005 Joint Statement issued by then President Bush and Prime Minister Singh. The Working Group first met in 2006 and held its second meeting after the U.S. and Indian governments completed the Indo-U.S. Civil Nuclear Cooperation Agreement. The Agreement, signed in October 2008, aims to provide new opportunities for trade and job creation for both economies; to

189

Letter from Pepco Holdings Regarding the Reliability of Electric Service in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

from Pepco Holdings Regarding the Reliability of Electric from Pepco Holdings Regarding the Reliability of Electric Service in the District of Columbia Letter from Pepco Holdings Regarding the Reliability of Electric Service in the District of Columbia Docket No. EO-05-01: I am writing to alert you to our concerns regarding the reliability of electricity service for the Nation's Capital in light of the recent shutdown of the Potomac River Generating Station in Alexandria, Virginia. The plant shutdown has removed a redundancy which is critical to assuring the reliable supply of electricity. Accordingly, we believe that immediate resumption of plant operations, in a manner that balances environmental and electricity reliability concerns, is critical to ensuring reliable electric service to the Nation's Capital.

190

A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion  

NLE Websites -- All DOE Office Websites (Extended Search)

A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion Plasmas Fusion Energy Sciences (FES) FES Home About Research Facilities Science Highlights Benefits of FES Funding Opportunities Fusion Energy Sciences Advisory Committee (FESAC) News & Resources Contact Information Fusion Energy Sciences U.S. Department of Energy SC-24/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-4941 F: (301) 903-8584 E: sc.fes@science.doe.gov More Information » October 2012 A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion Plasmas Recent experiments have confirmed the great potential of a novel plasma-material interface concept. Print Text Size: A A A Subscribe FeedbackShare Page Click to enlarge photo. Enlarge Photo

191

U.S. and India Hold the Second Meeting of the Indo-United States Civil  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

India Hold the Second Meeting of the Indo-United States India Hold the Second Meeting of the Indo-United States Civil Nuclear Energy Working Group U.S. and India Hold the Second Meeting of the Indo-United States Civil Nuclear Energy Working Group April 30, 2009 - 12:00am Addthis The United States hosted the second meeting of the U.S.-India Civil Nuclear Energy Working Group at Idaho National Laboratory on April 28-30, 2009. This was the first meeting held by the Working Group since entry into force of the U.S.-India peaceful nuclear cooperation agreement. The agreement, signed in October 2008, aims to provide new opportunities for trade and job creation for both economies, help India meet its rapidly increasing energy needs in an environmentally responsible way, and enhance global nonproliferation efforts by bringing India closer to the nonproliferation

192

Energy Secretary Chu and HUD Secretary Donovan to Hold Press Conference in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and HUD Secretary Donovan to Hold Press and HUD Secretary Donovan to Hold Press Conference in Bohemia to Unveil New FHA Powersaver Program Energy Secretary Chu and HUD Secretary Donovan to Hold Press Conference in Bohemia to Unveil New FHA Powersaver Program April 20, 2011 - 12:00am Addthis WASHINGTON, DC - THURSDAY, April 21st, U.S. Department of Energy Secretary Steven Chu and U.S. Housing and Urban Development Secretary Shaun Donovan will host a press conference at Energy Testing Services in Bohemia, Long Island to unveil a new pilot program that will offer credit-worthy borrowers low-cost loans to make energy-saving improvements to their homes. Congressman Steve Israel will also join the event. WHAT: Press conference to unveil new HUD pilot program WHO: U.S. Energy Secretary Steven Chu U.S. Housing and Urban Development Secretary Shaun Donovan

193

CAM operated tool for proximate or remote holding of an object  

DOE Patents (OSTI)

A tool for releasably holding an object includes a receptacle having an outer sleeve and a rotatable inner sleeve. The inner sleeve is coaxially positioned within the outer sleeve and includes a locking member. An insert which is adapted to be operably associated with the receptacle includes a cam. The cam includes a guide and a slot so that when the cam is inserted into the inner sleeve, the guide aligns the locking member with the slot allowing the locking member to engage the slot thereby holding the receptacle and the insert together.

Schrum, P.B.; Gajdzik, G.P. Jr.

1995-12-31T23:59:59.000Z

194

THE CSP DICHOTOMY HOLDS FOR DIGRAPHS WITH NO SOURCES AND NO SINKS  

E-Print Network (OSTI)

THE CSP DICHOTOMY HOLDS FOR DIGRAPHS WITH NO SOURCES AND NO SINKS (A POSITIVE ANSWER conjectured in 1990 (using the language of graph homomorphisms) a CSP dichotomy for digraphs with no sources hered- itarily hard digraphs. Further, we show that the CSP dichotomy for digraphs with no sources

Barto, Libor

195

Sensitivity of the Global Water Cycle to the Water-Holding Capacity of Land  

Science Conference Proceedings (OSTI)

The sensitivity of the global water cycle to the water-holding capacity of the plant-root zone of continental soils is estimated by simulations using a mathematical model of the general circulation of the atmosphere, with prescribed ocean surface ...

P. C. D. Milly; K. A. Dunne

1994-04-01T23:59:59.000Z

196

Hold-Time Effects on Low-Cycle-Fatigue Behavior of Hastelloy X ...  

Science Conference Proceedings (OSTI)

Total strain-controlled low-cycle-fatigue tests with and without hold times were ... frequency-modified tensile-hysteresis-energy method. The predicted lives were ... usage of this material in gas-turbine and chemical-process industries is based...

197

Top UN officials call on hold-out States to ratify treaty banning nuclear tests  

E-Print Network (OSTI)

Top UN officials call on hold-out States to ratify treaty banning nuclear tests 29 August 2011 in Kurchatov, Kazakhstan. (June 2010) 29 August 2011 ­ Warning that voluntary moratoriums on nuclear weapon War, hundreds of nuclear weapon tests left behind a devastating legacy for local citizens

198

Dual position locking joint design for a medical walker  

E-Print Network (OSTI)

In this thesis we analyzed a joint created for a medical walker currently in the prototyping stage of development. The walker is designed to help a user stand up from a seated position. The joint holds two legs of the ...

Beecher, Eric M

2010-01-01T23:59:59.000Z

199

A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion  

NLE Websites -- All DOE Office Websites (Extended Search)

A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion A Snowflake-Shaped Magnetic Field Holds Promise for Taming Harsh Fusion Plasmas Recent experiments have confirmed the great potential of a novel plasma-material interface concept. By U.S Department of Energy Office of Science October 31, 2012 Tweet Widget Facebook Like Google Plus One National Spherical Torus Experiment (Photo by Elle Starkman, Office of Communications, PPPL) National Spherical Torus Experiment The Science Heat escaping from the core of a twelve-million degree nuclear fusion plasma device was successfully contained by a snowflake-shaped magnetic field to mitigate its impact on device walls. The Impact One of the grand challenges of the magnetic fusion research is to "tame the plasma-material interface"-to develop an interface between the hot

200

How to create formatted blocks to hold OpenEI wiki content | OpenEI  

Open Energy Info (EERE)

How to create formatted blocks to hold OpenEI wiki content How to create formatted blocks to hold OpenEI wiki content Home > Groups > OpenEI Community Central Rmckeel's picture Submitted by Rmckeel(297) Contributor 25 June, 2013 - 07:39 content formatting user interface wiki The OpenEI wiki frontpage uses "boxes" that help organize content. These boxes are frequently re-used across the site. While there is an easy way of doing this - the FlexiBlock template - the frontpage was just now converted to using that format. The FlexiBlock format is a more elegant and less error-prone way to use the frontpage block formats, rather than creating nested divs. It also ensures we can update the format of the boxes sitewide easily if we ever need to (and we probably will). If you or someone you know is using the frontpage blocks, please switch to

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

NREL: Wind Research - NREL Analysis Enables BOEM to Hold Its First  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Enables BOEM to Hold Its First Commercial Offshore Lease Sale Analysis Enables BOEM to Hold Its First Commercial Offshore Lease Sale in the United States December 2, 2013 Photo showing three 5-megawatt wind turbines installed above the water at the Alpha Ventus Offshore Wind Farm in Germany. A boat is moving forward to the left of the turbines. REpower 5-megawatt wind turbines at the Alpha Ventus Offshore Wind Farm in Germany demonstrate the possibilities for offshore wind on a grand scale-and now new offshore wind opportunities are coming to the United States. Photo by Gary Norton, NREL 27363 When the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM) needed a process to delineate the bureau's proposed offshore Wind Energy Areas (WEAs) into auctionable leasing areas, the agency turned to the National Renewable Energy Laboratory (NREL). Under an

202

The Death of a Massive Star Holds Key to Early Universe | U.S. DOE Office  

Office of Science (SC) Website

The Death of The Death of a Massive Star Holds Key to Early Universe News Featured Articles 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Science Headlines Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 12.16.09 The Death of a Massive Star Holds Key to Early Universe Scientists found the remains of a massive star, providing them with new information to reassess the environment of the early Universe. Print Text Size: A A A Subscribe FeedbackShare Page Imagine if paleontologists found the fossilized remains of a long-hypothesized, but never discovered dinosaur deep in the Amazon rainforest. Well, physicists participating in the international Supernova Factory, a Department of Energy sponsored project at Lawrence Berkeley

203

Argonne CNM News: New inorganic semiconductor layers hold promise for solar  

NLE Websites -- All DOE Office Websites (Extended Search)

New inorganic semiconductor layers hold promise for solar energy New inorganic semiconductor layers hold promise for solar energy Inorganic surface ligands Inorganic surface ligands enable facile electron transport between quantum dots and opened novel opportunities for using nanostructures in solar cells. Inorganic dot array Arrays of quantum dots allow fabrication of solar cells by printing and other inexpensive techniques. A team of users from the University of Chicago, working with the NanoBio Interfaces Group, has demonstrated a method that could produce cheaper semiconductor layers for solar cells. The inorganic nanocrystal arrays, created by spraying a new type of colloidal "ink," have excellent electron mobility and could be a step toward addressing fundamental problems with current solar technology.

204

Search for Publications Related to ORNL DAAC Holdings, September 8, 2003  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Related to ORNL DAAC Holdings Publications Related to ORNL DAAC Holdings The ORNL DAAC has expanded its searchable bibliographic database so that users can locate publications related to a wide range of data sets in its archive. Projects such as FLUXNET, BOREAS, BOREAS Follow-On, SAFARI 2000, LBA, Net Primary Productivity, and VEMAP are represented, along with Climate, Soil, and Vegetation collections, among others. The database contains bibliographic entries for more than 7200 publications that are directly or indirectly related to specific research projects and their general topics. It includes entries for publications that users have sent to the ORNL DAAC. Users can search for entries project by project, or they can search the entire series of projects at once. To access the bibliographic database, look for "Bibliographic Search" under

205

A Method to Improve Voltage Holding Across Vacuum Electrical Gaps to  

NLE Websites -- All DOE Office Websites (Extended Search)

A Method to Improve Voltage Holding Across Vacuum Electrical Gaps to A Method to Improve Voltage Holding Across Vacuum Electrical Gaps to Improve the Performance and Reduce the Conditioning Time by Removing Bacteria, Fungi, and Other Microbial Organisms and Their Spores. -- . Inventor Larry Grisham. Disclosed is a method to potentially increase the performance of devices which employ electric field within a vacuum by increasing the magnitude of the electric field gradient which can be sustained, the reliability of the devices, and by reducing the conditioning time of devices such as charged particle accelerators when they are brought into operation. The disclosed method can be employed, for example, for devices requiring voltages across vacuum gaps, such as, but not limited to, charged particle accelerators, X-ray machines, vacuum tubes, and vacuum electrical breakers.

206

EV Sales Skyrocketing. eGallon Holds Steady. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EV Sales Skyrocketing. eGallon Holds Steady. EV Sales Skyrocketing. eGallon Holds Steady. EV Sales Skyrocketing. eGallon Holds Steady. July 19, 2013 - 8:45am Addthis eGallon: Compare the costs of driving with electricity What is eGallon? It is the cost of fueling a vehicle with electricity compared to a similar vehicle that runs on gasoline. Did you know? On average, it costs about 3 times less to drive an electric vehicle. Find out how much it costs to fuel an electric vehicle in your state regular gasoline 0 6 4 1 0 3 · 0 2 0 4 8 6 0 8 9 2 3 5 0 electric eGallon 0 4 1 7 2 3 3 · 0 4 2 0 4 6 0 8 5 9 1 5 0 Data and Methodology The eGallon price is calculated using the most recently available state by state residential electricity prices. The state gasoline price above is either the statewide average retail price or a multi-state regional average

207

EECH Group AG formerly European Energy Consult Holding P T Technology AG |  

Open Energy Info (EERE)

EECH Group AG formerly European Energy Consult Holding P T Technology AG EECH Group AG formerly European Energy Consult Holding P T Technology AG Jump to: navigation, search Name EECH Group AG (formerly European Energy Consult Holding, P&T Technology AG) Place Hamburg, Schleswig-Holstein, Germany Zip 20354 Sector Solar, Wind energy Product Manager of retail bond issues to fund wind, PV and solar thermal power projects. Coordinates 53.553345°, 9.992455° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":53.553345,"lon":9.992455,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

208

Influence of Hold Time on Creep-Fatigue Behavior of an Advanced Austenitic Alloy  

Science Conference Proceedings (OSTI)

An advanced austenitic alloy, HT-UPS (high temperature-ultrafine precipitate strengthened), is a candidate material for the structural components of fast reactors and energy-conversion systems. HT-UPS provides improved creep resistance through a composition based on 316 stainless steel (SS) with additions of Ti and Nb to form nano-scale MC precipitates in the austenitic matrix. The low cycle fatigue and creep-fatigue behavior of a HT-UPS alloy has been investigated at 650 C, 1.0% total strain, and an R ratio of -1 with hold times as long as 9000 sec at peak tensile strain. The cyclic deformation response of HT-UPS is compared to that of 316 SS. The cycles to failure are similar, despite differences in peak stress profiles and the deformed microstructures. Cracking in both alloys is transgranular (initiation and propagation) in the case of continuous cycle fatigue, while the primary cracks also propagate transgranularly during creep-fatigue cycling. Internal grain boundary damage as a result of the tensile hold is present in the form of fine cracks for hold times of 3600 sec and longer and substantially more internal cracks are visible in 316 SS than HT-UPS. The dislocation substructures observed in the deformed material are different. An equiaxed cellular structure is observed in 316 SS, whereas tangles of dislocations are present at the nanoscale MC precipitates in HT-UPS and no cellular substructure is observed.

Mark Carroll; Laura Carroll

2011-09-01T23:59:59.000Z

209

PULSE COLUMN DESIGN  

SciTech Connect

A stagewise approach was used in a theoretical analysis of pulse columns. In the analysis the column was arbitrarily divided into discrete stages comprising that part of the column between two adjacent perforated plates. The operation of the pulse column was described mathematically using material balance equations, and a design method was derived which used two stage lines and two operating lines, one set for the pulse generator upstroke and one set for the downstroke. Assuming equilibrium contact, the effect of recycle in a pulse column was shown to cause a large decrease in the separation obtained as the pulse frequency was increased. Hold-up studies were made using isoamyl alcohol- water, and methyl isobutyl ketone water. The hold-up per cycle of the dispersed phase for both systems was found to be equal to the interstage flow per cycle of the dispersed phase. Hold-up behavior at high frequencies was different for the two systems. Extraction runs were also made using the system methyl isobutyl ketone - acetic acid-water. The effects of recycle were found to result in a drop in column separation efficiency with increased pulse frequency. It was found to be theoretically possible for a column to operate in a pinched-in region even though this is not apparert from an examination of the superficial flow ratio of the two streams being fed to the column Techniques for sampling interstage flow streams in a colurm operating in the mixer-settler region are described. (J.R.D.)

Burkhart, L.E.; Fahien, R.W.

1958-11-01T23:59:59.000Z

210

Direct Fingerprinting on Multicasting Compressed Video  

Science Conference Proceedings (OSTI)

A video fingerprint is a kind of digital watermark used in digital video for tracking pirate copies in a multi-user environment. Different users receive the same video with different watermarks designed for uniquely identifying designated users. As a ...

Zheng Liu; Xue Li; Zhaoyang Dong

2005-01-01T23:59:59.000Z

211

Estimates of fire environments in ship holds containing radioactive material packages  

SciTech Connect

Fire environments that occur on cargo ships differ significantly from the fire environments found in land transport. Cargo ships typically carry a large amount of flammable fuel for propulsion and shipboard power, and may transport large quantities of flammable cargo. As a result, sea mode transport accident records contain instances of long lasting and intense fires. Since Irradiated Nuclear Fuel (INF) casks are not carried on tankers with large flammable cargoes, most of these dramatic, long burning fires are not relevant threats, and transport studies must concentrate on those fires that are most likely to occur. By regulation, INF casks must be separated from flammable cargoes by a fire-resistant, liquid-tight partition. This makes a fire in an adjacent ship hold the most likely fire threat. The large size of a cargo ship relative to any spent nuclear fuel casks on board, however, may permit a severe, long lasting fire to occur with little or no thermal impact on the casks. Although some flammable materials such as shipping boxes or container floors may exist in the same hold with the cask, the amount of fuel available may not provide a significant threat to the massive transport casks used for radioactive materials. This shipboard fire situation differs significantly from the regulatory conditions specified in 10 CFR 71 for a fully engulfing pool fire. To learn more about the differences, a series of simple thermal analyses has been completed to estimate cask behavior in likely marine and land thermal accident situations. While the calculations are based on several conservative assumptions, and are only preliminary, they illustrate that casks are likely to heat much more slowly in shipboard hold fires than in an open pool fire. The calculations also reinforce the basic regulatory concept that for radioactive materials, the shipping cask, not the ship, is the primary protection barrier to consider.

Koski, J.A.; Cole, J.K.; Hohnstreiter, G.F. [Sandia National Labs., Albuquerque, NM (United States); Wix, S.D. [GRAM, Inc., Albuquerque, NM (United States)

1995-12-31T23:59:59.000Z

212

Please Hold Me UP: Why Firms Grant Exclusive-Dealing Contracts  

E-Print Network (OSTI)

Why do irreplaceable firms with a choice of suppliers or customers deliberately expose themselves to the threat of hold up by contracting ex ante to deal with only one of them? Our explanation revolves around the multiple equilibria intrinsic to situations of unverifiable investment and many traders. Exclusive dealing eliminates inecient equilibria in which too many firms invest too little. The enhanced ex post bargaining power of the chosen rm is beneficial for incentives whilst the distributional impact is more than oset in the ex ante negotiations over which this firm obtains the access privelege.

David de Meza; Marianno Selvaggi

2003-01-01T23:59:59.000Z

213

U.S. and India Hold the Second Meeting of the Indo-United States Civil  

NLE Websites -- All DOE Office Websites (Extended Search)

U.S. and India Hold the Second Meeting of the Indo-United States Civil Nuclear Energy Working Group U.S. and India Hold the Second Meeting of the Indo-United States Civil Nuclear Energy Working Group The United States hosted the second meeting of the U.S.-India Civil Nuclear Energy Working Group at Idaho National Laboratory on April 28-30, 2009. This was the first meeting held by the Working Group since entry into force of the U.S.-India peaceful nuclear cooperation agreement. The agreement, signed in October 2008, aims to provide new opportunities for trade and job creation for both economies, help India meet its rapidly increasing energy needs in an environmentally responsible way, and enhance global nonproliferation efforts by bringing India closer to the nonproliferation mainstream. With completion of the peaceful nuclear cooperation agreement, both governments are now working to reinvigorate technical discussions begun under the Working Group in 2006. Mr. Shane Johnson, Acting Assistant Secretary for Nuclear Energy in the U.S. Department of Energy, and Dr. Ravi Grover, Director of India�s Strategic & Planning Group in the Department of Atomic Energy, served as co-chairs of the meeting. They opened the dialogue by reaffirming their commitment to work collaboratively to face global economic, climate change, and energy security challenges.

214

International Workshop on Best Practices in Material Hold-Up Monitoring  

Science Conference Proceedings (OSTI)

In the fall of 2006, the Oak Ridge National Laboratory (ORNL) hosted an INMM-sponsored International Workshop on Best Practices in Material Hold-Up Monitoring. This workshop represented the first time in over 20 years that the international community had gathered to discuss pertinent hold-up topics and needs. More than one hundred people attended the workshop. Their expertise in the field ranged from novice to expert, and they shared their experiences and expertise throughout the week of the workshop. Presenters discussed techniques that have been used worldwide to detect and characterize nuclear materials held up in processes and equipment and the policies used to report quantities detected. The primary goal of the workshop was to compile information on the best practices and lessons learned and to make this information available for sharing throughout the international community. This paper discusses the information that was produced from four separate working groups (each composed of workshop attendees). Each group was tasked to determine what it felt to be the best practices in the field today and what issues needed to be addressed to move the field forward in the 21st century.

Pickett, Chris A [ORNL; Coates, Cameron W [ORNL

2008-01-01T23:59:59.000Z

215

Influence of the Realistic Description of Soil Water-Holding Capacity on the Global Water Cycle in a GCM  

Science Conference Proceedings (OSTI)

The sensitivity of the hydrological cycle to soil water-holding capacity (WHC) is investigated using the Laboratoire de Meteorologie Dynamique General Circulation Model (LMD GCM) coupled to a land surface model (LSM). A reference simulation (REF),...

Agns Ducharne; Katia Laval

2000-12-01T23:59:59.000Z

216

Design Team Charrette | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Team Charrette Design Team Charrette Design Team Charrette October 16, 2013 - 4:37pm Addthis Holding a design team charrette is a key first step in bringing together the entire design team, including the agency, the winning architectural and engineering (A&E) firm, other design team members, and key experts that can inform the early design process. For renewable energy integration, the agency's project energy lead must be involved at this stage. Bringing the design team members together early is essential in ensuring that design requirements for energy are incorporated into the design efforts moving forward. A design charrette provides an opportunity for designers, users, and other decision makers to give input on how to best integrate their respective efforts into the project. The design charrette is a process that allows

217

Customization for games: lessons from variants of texas hold'em  

Science Conference Proceedings (OSTI)

System designers who build customization into games ought to consider how players think about adjustments. The distinctiveness of gaming contexts suggests that closer inspection of customization in games is warranted and will inform the design of customizable ... Keywords: customization, end-user programming, game design, game studies, variation

Gifford K. Cheung

2011-05-01T23:59:59.000Z

218

Singlet Fission Holds Two-for-One Potential in Solar Cells (Fact...  

NLE Websites -- All DOE Office Websites (Extended Search)

confirmed the first molecular compound specifically designed to exhibit multiple- exciton generation through singlet fission-in effect, producing two electrons for every one photon...

219

OSTI Holds 2012 STIP Working Meeting | OSTI, US Dept of Energy...  

Office of Scientific and Technical Information (OSTI)

STI activities and for leading a collaborative effort to a distributed STI environment. To that end, OSTI and designated representatives from the Headquarters Programs,...

220

Clinical Results of Image-Guided Deep Inspiration Breath Hold Breast Irradiation  

SciTech Connect

Purpose: To evaluate the feasibility, cardiac dose reduction, and the influence of the setup error on the delivered dose for fluoroscopy-guided deep inspiration breath hold (DIBH) irradiation using a cone-beam CT for irradiation of left-sided breast cancer patients. Methods and Materials: Nineteen patients treated according to the DIBH protocol were evaluated regarding dose to the ipsilateral breast (or thoracic wall), heart, (left ventricle [LV]and left anterior descending artery [LAD]), and lung. The DIBH treatment plan was compared to the free-breathing (FB) treatment planning and to the dose data in which setup error was taken into account (i.e., actual delivered dose). Results: The largest setup variability was observed in the direction perpendicular to the RT field ({mu} = -0.8 mm, {Sigma} = 2.9 mm, {sigma} = 2.0 mm). The mean (D{sub mean}) and maximum (D{sub max}) doses of the DIBH treatment plan was significantly lower compared with the FB treatment plan for the heart (34% and 25%, p < 0.001), LV (71% and 28%, p < 0.001), and LAD (52% and 39.8%, p < 0.001). For some patients, large differences were observed between the heart D{sub max} according to the DIBH treatment plan and the actual delivered dose (up to 71%), although D{sub max} was always smaller than the planned FB dose (mean group reduction = 29%, p < 0.001). Conclusion: The image-guided DIBH treatment protocol is a feasible irradiation method with small setup variability that significantly reduces the dose to the heart, LV, and LAD.

Borst, Gerben R.; Sonke, Jan-Jakob; Hollander, Suzanne den; Betgen, Anja; Remeijer, Peter; Giersbergen, Aline van; Russell, Nicola S.; Elkhuizen, Paula H.M.; Bartelink, Harry [Department of Radiation Oncology, The Netherlands Cancer Institute-Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands); Vliet-Vroegindeweij, Corine van, E-mail: C.v.vliet@nki.n [Department of Radiation Oncology, The Netherlands Cancer Institute-Antoni van Leeuwenhoek Hospital, Amsterdam (Netherlands)

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Natural-gas-fired CC unit holds NO[sub x] emissions below 9. 0 ppm  

Science Conference Proceedings (OSTI)

This article describes the East Syracuse generating plant, one of first commercial stations to include LM6000 gas turbines, designed to solve noise and emissions problems. This natural-gas-fired, combined-cycle cogeneration facility provides 97 MW of power to Niagara Mohawk Power Corp and up to 80,000 lb/hr of process steam to a nearby Bristol-Myers Squibb Co plant. The plant's original design had contemplated a base-loaded facility. This stemmed from the original power sales agreement with Niagara Mohawk Power Corp. Flexibility of original design proved advantageous to the East Syracuse (NY) plant when, during the latter stages of construction, the original agreement was renegotiated into a schedulable'' contract. The new agreement now in force, providing for limited dispatch of one of the two gas turbines, is designed around other pre-existing project agreements. Design flexibility and the choice of two gas turbines made the plant capable of meeting dispatch requirements with only minor modifications of plant design and staffing.

Grunbeck, G.

1994-09-01T23:59:59.000Z

222

Meta-design: design for designers  

Science Conference Proceedings (OSTI)

One fundamental challenge for the design of the interactive systems of the future is to invent and design environments and cultures in which humans can express themselves and engage in personally meaningful activities. Unfortunately, a large number of ... Keywords: consumer and designer mindsets, designing out of the box, domain-oriented design environments, evolutionary growth, impact of new media on design, open evolvable systems, open source, reseeding model, seeding, underdesigned systems

Gerhard Fischer; Eric Scharff

2000-08-01T23:59:59.000Z

223

Cardiac Motion During Deep-Inspiration Breath-Hold: Implications for Breast Cancer Radiotherapy  

SciTech Connect

Purpose: Many patients with left-sided breast cancer receive adjuvant radiotherapy during deep-inspiration breath hold (DIBH) to minimize radiation exposure to the heart. We measured the displacement of the left anterior descending artery (LAD) and heart owing to cardiac motion during DIBH, relative to the standard tangential fields for left breast cancer radiotherapy. Methods and Materials: A total of 20 patients who had undergone computed tomography-based coronary angiography with retrospective electrocardiographic gating were randomly selected for the present study. The patients underwent scanning during DIBH to control the influence of respiration on cardiac motion. Standard medial and lateral tangential fields were placed, and the LADs were contoured on the systolic- and diastolic-phase computed tomography data sets by the clinicians. Displacement of the LAD during cardiac contractions was calculated in three directions: toward the posterior edge of the treatment fields, left-right, and anteroposterior. Displacement of the entire heart was measured on the maximal and minimal intensity projection computed tomography images. Results: The mean displacement of the LAD from cardiac contraction without the influence of respiration for 20 patients was 2.3 mm (range, 0.7-3.8) toward the posterior edge of the treatment fields, 2.6 mm (range, 1.0-6.8) in the left-right direction, and 2.3 mm (range, 0.6-6.5) in the anteroposterior direction. At least 30% of the LAD volume was displaced >5 mm in any direction in 2 patients (10%), and <10% of the LAD volume was displaced >5 mm in 10 patients (50%). The extent of displacement of the heart periphery during cardiac motion was negligible near the treatment fields. Conclusions: Displacement of the heart periphery near the treatment fields was negligible during DIBH; however, displacement of the LAD from cardiac contraction varied substantially between and within patients. We recommend maintaining {>=}5 mm of distance between the LAD and the field edge for patients undergoing breast cancer radiotherapy during DIBH.

Wang Xiaochun, E-mail: xiaochunw@mdanderson.org [Department of Radiation Physics, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Pan Tinsu [Department of Imaging Physics, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Pinnix, Chelsea [Department of Radiation Oncology, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Zhang, Sean X.; Salehpour, Mohammad; Sun, Tzouh Liang [Department of Radiation Physics, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Gladish, Gregory [Department of Diagnostic Radiology, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States); Strom, Eric A.; Perkins, George H.; Tereffe, Welela; Woodward, Wendy; Hoffman, Karen E.; Buchholz, Thomas A.; Yu, T. Kuan [Department of Radiation Oncology, University of Texas M.D. Anderson Cancer Center, Houston, TX (United States)

2012-02-01T23:59:59.000Z

224

Positive design  

Science Conference Proceedings (OSTI)

This article is focused on the changes needed in design to create positive solutions for all involved in design processes. It draws upon the rich discussion and discourse from a conference focused on positive design involving managers, designers, and ...

Jurgen Faust

2009-09-01T23:59:59.000Z

225

Personal vehicles preferred by urban Americans: household automobile holdings and new car purchases projected to the year 2000  

DOE Green Energy (OSTI)

A procedure is described for modeling the choices made in urban American households among personal vehicles on the bases of cost, passenger capacity, and engine technology, and it projects those preferences to the year 1990 and 2000. The results of this disaggregate technique are used by the other predictive research tasks undertaken by Argonne National Laboratory in a project entitled Technology Assessment of Productive Conservation in Urban Transportation (TAPCUT). The vehicle preferences reported here furnish data for the overall TAPCUT objective of forecasting the probable effects of energy conservation policies in transportation. In our projections, vehicles with standard spark-ignition (Otto-cycle) engines continue to dominate automobile holdings and new car purchases in either of two socioeconomic scenarios under any of three settings (an existing policy set and two alternative conservation strategies). From 1990, small cars (seating four or fewer passengers) dominate urban holdings and sales in two of the three TAPCUT energy strategies - the exception being the strategy that emphasizes individual travel - and this holds true with only a minor variation for both socioeconomic scenarios (an optimistic one and a slightly pessimistic one). Advanced-technology vehicles are most successful under the Individual Travel Strategy. It appears that vehicle charateristics are far more significant than demographic descriptors in estimating household vehicle choice using this modeling approach.

Saricks, C.L.; Vyas, A.D.; Bunch, J.A.

1982-01-01T23:59:59.000Z

226

BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Watermark Designs, Ltd. Watermark Designs, Ltd. (Showerheads) ) ) ) ) ) Case Number: 2011-SW-2908 Issued: September 26, 2011 NOTICE OF NONCOMPLIANCE DETERMINATION Manufacturers and private labelers are prohibited from distributing covered products that do not comply with applicable Federal water conservation standards. 10 C.F.R. § 429.102; 42 U.S. C. § 6302. On July 25, 2011, DOE tested four units of Watermark brand showerhead model SH-FAL-90 manufactured by Watermark Designs, Ltd. (Watermark) in accordance with DOE test procedures (1 0 C.F.R. Part 430, Subpart B, Appendix S). DOE's testing demonstrated that Watermark showerhead model number SH-FAL-90 is not in compliance with Federal law. First, Federal water conservation standards require that the water flow for a showerhead may not exceed 2.5 gallons of water per minute (gpm). Watermark

227

Javascript Design  

Science Conference Proceedings (OSTI)

From the Publisher:JavaScript Design shows designers how to create interactive JavaScript applications for the Web. It provides detailed descriptions of:JavaScript structures, statements and objectsUsing JavaScript to create different ...

Bill B. Sanders

2001-12-01T23:59:59.000Z

228

Experimental design  

Science Conference Proceedings (OSTI)

Maximizing data information requires careful selection, termed design, of the points at which data are observed. Experimental design is reviewed here for broad classes of data collection and analysis problems, including: fractioning techniques ... Keywords: Key Design Issues in Data Mining, Science and Technology, Statistical Fundamentals

J. P. Morgan; Xinwei Deng

2012-03-01T23:59:59.000Z

229

Premixer Design for High Hydrogen Fuels  

DOE Green Energy (OSTI)

This 21-month project translated DLN technology to the unique properties of high hydrogen content IGCC fuels, and yielded designs in preparation for a future testing and validation phase. Fundamental flame characterization, mixing, and flame property measurement experiments were conducted to tailor computational design tools and criteria to create a framework for predicting nozzle operability (e.g., flame stabilization, emissions, resistance to flashback/flame-holding and auto-ignition). This framework was then used to establish, rank, and evaluate potential solutions to the operability challenges of IGCC combustion. The leading contenders were studied and developed with the most promising concepts evaluated via computational fluid dynamics (CFD) modeling and using the design rules generated by the fundamental experiments, as well as using GE's combustion design tools and practices. Finally, the project scoped the necessary steps required to carry the design through mechanical and durability review, testing, and validation, towards full demonstration of this revolutionary technology. This project was carried out in three linked tasks with the following results. (1) Develop conceptual designs of premixer and down-select the promising options. This task defined the ''gap'' between existing design capabilities and the targeted range of IGCC fuel compositions and evaluated the current capability of DLN pre-mixer designs when operated at similar conditions. Two concepts (1) swirl based and (2) multiple point lean direct injection based premixers were selected via a QFD from 13 potential design concepts. (2) Carry out CFD on chosen options (1 or 2) to evaluate operability risks. This task developed the leading options down-selected in Task 1. Both a GE15 swozzle based premixer and a lean direct injection concept were examined by performing a detailed CFD study wherein the aerodynamics of the design, together with the chemical kinetics of the combustion process, were analyzed to evaluate the performance of the different concepts. Detailed 1-D analysis was performed to provide 1-step NOx and 1-step combustion models that could be utilized in CFD to provide more accurate estimates of NOx for more complicated combustion designs. The swozzle results identified potential problems with flame holding, flashback and with adequate mixing. Flame holding issues were further evaluated with laboratory testing to determine under what conditions a jet in cross flow would flame hold. Additional CFD analysis was also performed on fuel injection from a peg to simulate fuel injection off a vane's trailing edge. This task was concluded with a Conceptual Design Review of the two selected design concepts. (3) Optimize design and re-evaluate operability risks. This task extended the analysis of LDI concepts and increased understanding of the optimal design configuration. Designs were selected for subscale combustion laboratory testing and then modeled using CFD to validate CFD methodology. CFD provided a good qualitative match and reasonable quantitative match with the test results. Tests and CFD modeling indicated a path to low NOx combustion with no diluent addition. Different swirler designs were also evaluated and the most promising, a counter rotating swirler, was selected for further evaluation. CFD modeling was performed and the design was optimized to improve mixing. CFD modeling indicated the potential for low NOx combustion without diluent addition. CFD was validated against cold flow testing on a swirler using helium injection in place of hydrogen. Further validation work is still needed to ensure the ability to accurately model the mixing of swirling flows. Entitlement testing was performed on a perfectly premixed H2/N2/air mixture. Results showed that low NOx could be obtained at the temperatures of interest (7FB conditions) with no diluent addition. Results also showed that further NOx reductions might be possible by taking advantage of the very rapid H2 reaction to reduce combustor length and hence residence time. These results also in

Benjamin P. Lacy; Keith R. McManus; Balachandar Varatharajan; Biswadip Shome

2005-12-16T23:59:59.000Z

230

Designing Creativity  

E-Print Network (OSTI)

Is it possible to design for creativity? This is one of the most important research questions in AI and Design. This paper raises the question whether automated software agent design can be creative. Not only is the artefact dynamic in the sense that it adapts to its environment, it is also autonomous: an agent decides on its own when to be modified and by whom. An agent's functionality may evolve beyond the expectations of its designers and/or users resulting in very new, unique artefacts. Is this type of design creative? Is the process creative? The result? 1.

Frances M. T. Brazier; Niek J. E. Wijngaards

2002-01-01T23:59:59.000Z

231

An Operating System Analog to the Perl Data Tainting ...  

Science Conference Proceedings (OSTI)

... operating system designed from the ground up with ... tainting file system emphasizes the vulnerability of the ... system enforces a low water-mark policy ...

2000-11-03T23:59:59.000Z

232

Design Specifications  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Design Specifications Services Overview ECS Audio/Video Conferencing Fasterdata IPv6 Network Network Performance Tools (perfSONAR) ESnet OID Registry PGP Key Service Virtual Circuits (OSCARS) OSCARS Case Study Documentation User Manual FAQ Design Specifications Functional Specifications Notifications Publications Authorization Policy Default Attributes Message Security Clients For Developers Interfaces Links Hardware Requirements DOE Grids Service Transition Contact Us Technical Assistance: 1 800-33-ESnet (Inside the US) 1 800-333-7638 (Inside the US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Design Specifications OSCARS Reservation Manager - Design Specifications Year 3 Update (DRAFT) David Robertson, Chin Guok

233

CHARACTERIZATION AND EVALUATION OF CAUSTIC WASH TANK AND SOLVENT HOLD TANK SAMPLES FROM MCU FROM AUGUST TO SEPTEMBER 2011  

SciTech Connect

During processing of Salt Batches 3 and 4 in the Modular Caustic-Side Solvent Extraction Unit (MCU), the decontamination efficiency for cesium declined from historical values and from expectations based on laboratory testing. This report documents efforts to analyze samples of solvent and process solutions from MCU in an attempt to understand the cause of the reduced performance and to recommend mitigations. CWT Solutions from MCU from the time period of variable decontamination factor (DF) performance which covers from April 2011 to September 2011 (during processing of Salt Batch 4) were examined for impurities using chromatography and spectroscopy. The results indicate that impurities were found to be of two types: aromatic containing impurities most likely from Modifier degradation and aliphatic type impurities most likely from Isopar{reg_sign} L and tri-n-octylamine (TOA) degradation. Caustic washing the Solvent Hold Tank (SHT) solution with 1M NaOH improved its extraction ability as determined from {sup 22}Na uptake tests. Evidence from this work showed that pH variance in the aqueous solutions within the range of 1M nitric acid to 1.91M NaOH that contacted the solvent samples does not influence the analytical determination of the TOA concentration by GC-MS.

Fondeur, F.; Fink, S.

2012-08-01T23:59:59.000Z

234

SOLVENT HOLD TANK SAMPLE RESULTS FOR MCU-13-1403/1404/1405/1406/1407/1408: QUARTERLY SAMPLE FROM SEPTEMBER 2013  

SciTech Connect

Savannah River National Laboratory (SRNL) analyzed solvent samples from the Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-13-1403, MCU-13-1404, MCU-13-1405, MCU-13-1406, MCU-13-1407, and MCU-13-1408 received on September 17, 2013 are reported. This sample was taken after the addition of the Next Generation Solvent (NGS) cocktail to produce a NGS-MCU blended solvent. The results show that the solvent contains a slight excess of Isopar? L and a deficit concentration of modifier and TiDG when compared to the target composition. Addition of TiDG trim is recommended. SRNL also analyzed the SHT sample for {sup 137}Cs content and determined the measured value is within tolerance and that the value has returned to levels observed in 2011. In contrast to what was observed in the heel prior to adding the NGS cocktail, no organic impurities were detected in these solvent samples.

Fondeur, F.; Taylor-Pashow, K.

2013-11-20T23:59:59.000Z

235

Engitectural Design  

E-Print Network (OSTI)

Traditionally, Architecture and Engineering have been disciplines practiced exclusive of one another's input and collaboration. This seemingly awkward custom is due in part to tradition and to the two distinct perspectives each discipline has concerning the function of a building and it's many components. In the past, collaboration on a project generally occurred out of necessity, and can usually be attributed to a system and design integration problems. In most instances, these issues are related to the mechanical systems of building, and in a hot and humid climate the issues are magnified. Therefore, this paper will discuss the concepts and merits of a new design process called: Engitectural Design. Engitectural Design is the concept of blending the many design and aesthetic concerns of architecture with the more technical aspects of engineering, especially in the area of mechanical HVAC systems. The use of this new design procedure will reduce, if not eliminate, current problems with clearances, mechanical room size and optimal area selection. Merely incorporating the mechanical needs of a building during the schematic phase will reduce communication problems that cause the above mentioned problems, and thus optimize the system. This paper will address the mutual concerns of both professions as it pertains to materials, lighting, surface finishes, passive and active solar and the use of landscaping, focusing on the benefits of mutual agreement in a hot and humid climate. To be successful, the collaboration must begin in pre-design and continue through project completion. During initial implementation of Engitectural Design, a fm can expect each phase of a project to take longer than usual. Lack of established relationships, poor communication and professional territorial rights will exist in the beginning. However, over time a fm can expect a time reduction due to fewer revisions and the elimination of duplicated work. As it pertains to today's more advanced HVAC systems, this new cooperation and understanding of the needs within disciplines will yield a more effective and efficient operating unit for today's hot and humid environment.

Gagliardi, D. R.

1996-01-01T23:59:59.000Z

236

Space design  

Science Conference Proceedings (OSTI)

Space stations, Moon bases and Mars bases are artificial habitats intended to support human life in extreme conditions. Their purpose is to pursue human progress and to gain knowledge and experience of the environment surrounding our planet. This research ... Keywords: Human factors, Interior design, Space habitability, Sustainability, Vision

Irene Lia Schlacht; Henrik Birke

2011-06-01T23:59:59.000Z

237

Market Transformation: A Practical Guide to Designing and Evaluating Energy Efficient Programs  

Science Conference Proceedings (OSTI)

One widely accepted paradigm for energy efficiency marketing is called market transformation. This theory holds that energy efficiency programs should be designed to transform markets by reducing market barriers, thus allowing energy efficient products and services to become widely available and adopted by energy customers. Market transformation theory also states that these market changes should become persistent and self-sustaining.

2001-04-19T23:59:59.000Z

238

Computer simulations help design new nuclear reactors  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer simulations help design new nuclear reactors Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures & Other Documents Multimedia Library About Nuclear Energy Nuclear Reactors Designed by Argonne Argonne's Nuclear Science and Technology Legacy Opportunities within NE Division Visit Argonne Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE on Flickr Celebrating the 70th Anniversary of Chicago Pile 1 (CP-1) Argonne OutLoud on Nuclear Energy Argonne Energy Showcase 2012 Highlights Bookmark and Share Reprinted from "Argonne Now" - Spring 2008 Physicist Won-Sik Yang and computer scientist Andrew Siegel hold a fuel rod assembly in front of a model of the Experimental Breeder Reactor-II

239

Automatic design of 3-d fixtures and assembly pallets  

Science Conference Proceedings (OSTI)

This paper presents an implemented algorithm that automatically designs fixtures and assembly pallets to hold three-dimensional parts. All fixtures generated by the algorithm employ round side locators, a side clamp, and cylindrical supports; depending on the value of an input control flag, the fixture may also include swing-arm top clamps. Using these modular elements, the algorithm designs fixtures that rigidly constrain and locate the part, obey task constraints, are robust to part shape variations, are easy to load, and are economical to produce. For the class of fixtures that are considered, the algorithm is guaranteed to find the global optimum design that satisfies these and other pragmatic conditions. The authors present the results of the algorithm applied to several practical manufacturing problems. For these complex problems the algorithm typically returns initial high-quality fixture designs in less than a minute, and identifies the global optimum design in just over an hour. The algorithm is also capable of solving difficult design problems where a single fixture is desired that can hold either of two parts.

Brost, R.C.; Peters, R.R. [Sandia National Labs., Albuquerque, NM (United States). Intelligent Systems and Robotics Center

1997-01-01T23:59:59.000Z

240

Optimizing Nuclear Reaction Analysis (NRA) using Bayesian Experimental Design  

SciTech Connect

Nuclear Reaction Analysis with {sup 3}He holds the promise to measure Deuterium depth profiles up to large depths. However, the extraction of the depth profile from the measured data is an ill-posed inversion problem. Here we demonstrate how Bayesian Experimental Design can be used to optimize the number of measurements as well as the measurement energies to maximize the information gain. Comparison of the inversion properties of the optimized design with standard settings reveals huge possible gains. Application of the posterior sampling method allows to optimize the experimental settings interactively during the measurement process.

Toussaint, Udo von; Schwarz-Selinger, Thomas; Gori, Silvio [Max-Planck-Institut fuer Plasmaphysik, Boltzmannstrasse 2 85748 Garching (Germany)

2008-11-06T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Mechanical Design  

SciTech Connect

The particle beam of the SXR (soft x-ray) beam line in the LCLS (Linac Coherent Light Source) has a high intensity in order to penetrate through samples at the atomic level. However, the intensity is so high that many experiments fail because of severe damage. To correct this issue, attenuators are put into the beam line to reduce this intensity to a level suitable for experimentation. Attenuation is defined as 'the gradual loss in intensity of any flux through a medium' by [1]. It is found that Beryllium and Boron Carbide can survive the intensity of the beam. At very thin films, both of these materials work very well as filters for reducing the beam intensity. Using a total of 12 filters, the first 9 being made of Beryllium and the rest made of Boron Carbide, the beam's energy range of photons can be attenuated between 800 eV and 9000 eV. The design of the filters allows attenuation for different beam intensities so that experiments can obtain different intensities from the beam if desired. The step of attenuation varies, but is relative to the thickness of the filter as a power function of 2. A relationship for this is f(n) = x{sub 0}2{sup n} where n is the step of attenuation desired and x{sub 0} is the initial thickness of the material. To allow for this desired variation, a mechanism must be designed within the test chamber. This is visualized using a 3D computer aided design modeling tool known as Solid Edge.

2010-08-25T23:59:59.000Z

242

Prototype spent-fuel canister design, analysis, and test  

SciTech Connect

Sandia National Laboratories was asked by the US Energy Research and Development Administration (now US Department of Energy) to design the spent fuel shipping cask system for the Clinch River Breeder Reactor Plant (CRBRP). As a part of this task, a canister which holds liquid sodium and the spent fuel assembly was designed, analyzed, and tested. The canister body survived the regulatory Type-B 9.1-m (30-ft) drop test with no apparent leakage. However, the commercially available metal seal used in this design leaked after the tests. This report describes the design approach, analysis, and prototype canister testing. Recommended work for completing the design, when funding is available, is included.

Leisher, W.B.; Eakes, R.G.; Duffey, T.A.

1982-03-01T23:59:59.000Z

243

Available Technologies: Diamond Watermarking with Nitrogen ...  

See More Ion Sources and Beams Technologies. Contact Us. Receive Customized Tech Alerts. Tech Transfer Site Map. Last updated: 07/12/2013.

244

Design Scenarios: Enabling transparent parametric design spaces  

Science Conference Proceedings (OSTI)

This paper presents a novel methodology called Design Scenarios (DSs) intended for use in conceptual design of buildings. DS enables multidisciplinary design teams to streamline the requirements definition, alternative generation, analysis, and decision-making ... Keywords: Conceptual design, Design spaces, Ontology, Parametric modeling, Process mapping, Requirements modeling

Victor Gane; John Haymaker

2012-08-01T23:59:59.000Z

245

Tutorial Design Windows - CECM  

E-Print Network (OSTI)

Tutorial Design Windows: Activity 2: Activity 2 Design Window Return to tutorial. Exercise 1: Exercise 1 Design Window Return to exercises. Exercise 2: Exercise ...

246

Simplicity in interaction design  

Science Conference Proceedings (OSTI)

Attaining simplicity is a key challenge in interaction design. Our approach relies on a minimalist design exercise to explore the communication capacity for interaction components. This approach results in expressive design solutions, useful perspectives ... Keywords: expressiveness, interface design, simplicity, usability

Angela Chang; James Gouldstone; Jamie Zigelbaum; Hiroshi Ishii

2007-02-01T23:59:59.000Z

247

LANSCE harp upgrade: analysis, design, fabrication and installation  

SciTech Connect

The primary goal of this newly installed beam profile measurement is to provide the facility operators and physicists with a reliable horizontal and vertical projected beam distribution and location with respect to the proton beam target and beam aperture. During a 3000-hour annual run cycle, 5 {mu}C of charge is delivered every 50 milliseconds through this harp to the downstream TRMS Mark III target. The resulting radioactive annual dose near this harp is at least 6 MGy. Because of this harsh environment, the new harp design has been further optimized for robustness. For example, compared to an earlier design, this harp has half of the sensing wires and utilizes only a single bias plane. The sensing fibers are 0.079-mm diameter SiC fibers. To hold these fibers to a rigid ceramic structure, a collet fiber-clamping device accomplishes the three goals of maintaining a mechanical fiber clamp, holding the sense fibers under a slight tensile force, and providing a sense-fiber electrical connection. This paper describes the harp analysis and design, and provides fabrication, assembly, and some installation information, and discusses wiring alterations.

Gilpatrick, John D [Los Alamos National Laboratory; Chacon, Phillip [Los Alamos National Laboratory; Martinez, Derwin [Los Alamos National Laboratory; Power, John F [Los Alamos National Laboratory; Smith, Brian G [Los Alamos National Laboratory; Taylor, Mark A [Los Alamos National Laboratory; Gruchalla, Mike [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

248

NREL: News Feature - Light Inspires Energy Efficient Building Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Light Inspires Energy Efficient Building Design Light Inspires Energy Efficient Building Design March 1, 2010 Photo of a man and a woman in a lab holding a window with tinted glass. Enlarge image NREL Researchers Dane Gillespie and Erin Whitney will get to see the windows they normally test in the lab used in a real world environment at the RSF. Credit: Pat Corkery Artists find inspiration in many ways. But for the artists (architects and researchers) working collaboratively to create the most energy efficient office space in the U.S., the inspiration was simply light. In fact, light and the access to light turned out to be a top factor when designing the U.S. Department of Energy's (DOE) Research Support Facility (RSF) located on NREL's South Table Mountain Campus near Golden, Colo. "One of the most powerful drivers in the project is daylight," Philip

249

Holistic ship design optimization  

Science Conference Proceedings (OSTI)

Ship design is a complex endeavor requiring the successful coordination of many disciplines, of both technical and non-technical nature, and of individual experts to arrive at valuable design solutions. Inherently coupled with the design process is design ... Keywords: Enhanced survivability, Genetic algorithms, Holistic ship design, Minimization of resistance and wash, Multi-objective optimization

Apostolos Papanikolaou

2010-11-01T23:59:59.000Z

250

Whither design space?  

Science Conference Proceedings (OSTI)

Design space exploration is a long-standing focus in computational design research. Its three main threads are accounts of designer action, development of strategies for amplification of designer action in exploration, and discovery of computational ... Keywords: Design Space Exploration, Knowledge Representation, Search, State Space, Typed Feature Structures

Robert F. Woodbury; Andrew L. Burrow

2006-04-01T23:59:59.000Z

251

Umatilla Satellite and Release Sites Project : Final Conceptual Design Report.  

DOE Green Energy (OSTI)

This report presents the results of site analysis for the Umatilla Satellite and Release Sites Project. The purpose of this project is to provide engineering services for the siting and conceptual design of satellite and release facilities for the Umatilla Basin hatchery program. The Umatilla Basin hatchery program consists of artificial production facilities for salmon and steelhead to enhance production in the Umatilla River as defined in the Umatilla master plan approved in 1989 by the Northwest Power Planning Council. Facilities identified in the master plan include adult salmon broodstock holding and spawning facilities, facilities for recovery, acclimation, and/or extended rearing of salmon juveniles, and development of river sites for release of hatchery salmon and steelhead. The historic and current distribution of fall chinook, summer chinook, and coho salmon and steelhead trout was summarized for the Umatilla River basin. Current and future production and release objectives were reviewed. Twenty seven sites were evaluated for the potential development of facilities. Engineering and environmental attributes of the sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

Montgomery, James M.

1992-03-01T23:59:59.000Z

252

Northeast Oregon Hatchery Project, Conceptual Design Report, Final Report.  

DOE Green Energy (OSTI)

This report presents the results of site analysis for the Bonneville Power Administration Northeast Oregon Hatchery Project. The purpose of this project is to provide engineering services for the siting and conceptual design of hatchery facilities for the Bonneville Power Administration. The hatchery project consists of artificial production facilities for salmon and steelhead to enhance production in three adjacent tributaries to the Columbia River in northeast Oregon: the Grande Ronde, Walla Walla, and Imnaha River drainage basins. Facilities identified in the master plan include adult capture and holding facilities; spawning incubation, and early rearing facilities; full-term rearing facilities; and direct release or acclimation facilities. The evaluation includes consideration of a main production facility for one or more of the basins or several smaller satellite production facilities to be located within major subbasins. The historic and current distribution of spring and fall chinook salmon and steelhead was summarized for the Columbia River tributaries. Current and future production and release objectives were reviewed. Among the three tributaries, forty seven sites were evaluated and compared to facility requirements for water and space. Site screening was conducted to identify the sites with the most potential for facility development. Alternative sites were selected for conceptual design of each facility type. A proposed program for adult holding facilities, final rearing/acclimation, and direct release facilities was developed.

Watson, Montgomery (Montgomery Watson, Bellevue, WA)

1995-03-01T23:59:59.000Z

253

Solar control design package  

DOE Green Energy (OSTI)

Information used in the evaluation of design of Solar Control's solar heating and cooling system controller and the Solarstat is presented. System performance specifications, design data brochures, and detailed design drawings are presented.

Not Available

1978-08-01T23:59:59.000Z

254

Computation & design for nanophotonics  

E-Print Network (OSTI)

The versatility of computational design as an alternative to design by nanofabrication has made computers a reliable design tool in nanophotonics. Given that almost any 2d pattern can be fabricated at infrared length scales, ...

Oskooi, Ardavan F

2010-01-01T23:59:59.000Z

255

Advanced Remote Maintenance Design for Pilot-Scale Centrifugal Contactors  

Science Conference Proceedings (OSTI)

Advanced designs of used nuclear fuel recycling processes and radioactive waste treatment processes are expected to include more ambitious goals for aqueous based separations including; higher separations efficiency, high-level waste minimization, and a greater focus on continuous processes to minimize cost and footprint. Therefore, annular centrifugal contactors are destined to play a more important role for such future processing schemes. Pilot-scale testing will be an integral part of development of many of these processes. An advanced design for remote maintenance of pilot-scale centrifugal contactors has been developed and a prototype module fabricated and tested for a commercially available pilot-scale centrifugal contactor (CINC V-02, 5-cm rotor diameter). Advanced design features include air actuated clamps for holding the motor-rotor assembly in place, an integral electrical connection, upper flange o-rings, a welded bottom plate, a lifting bale, and guide pins. These design features will allow for rapid replacement of the motor rotor assembly, which can be accomplished while maintaining process equilibrium. Hydraulic testing of a three-stage prototype unit was also performed to verify that design changes did not impact performance of the centrifugal contactors. Details of the pilot-scale remote maintenance design, results of testing in a remote mockup test facility, and results of hydraulic testing of the advanced design are provided.

Jack Law; David Meikrantz; Troy Garn; Lawrence Macaluso

2011-02-01T23:59:59.000Z

256

Passive Solar Design  

Energy.gov (U.S. Department of Energy (DOE))

The difference between a passive solar home and a conventional home is design. Passive solar homes and other buildings are designed to take advantage of the local climate.

257

SOLVENT HOLD TANK SAMPLE RESULTS FOR MCU-13-189, MCU-13-190, AND MCU-13-191: QUARTERLY SAMPLE FROM SEPTEMBER 2013  

SciTech Connect

Savannah River National Laboratory (SRNL) analyzed solvent samples from Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-13-189, MCU-13-190, and MCU-13-191 received on September 4, 2013 are reported. The results show that the solvent (remaining heel in the SHT tank) at MCU contains excess Isopar? L and a deficit concentration of modifier and trioctylamine when compared to the standard MCU solvent. As with the previous solvent sample results, these analyses indicate that the solvent does not require Isopar? L trimming at this time. Since MCU is switching to NGS, there is no need to add TOA nor modifier. SRNL also analyzed the SHT sample for {{sup 137}Cs content and determined the measured value is within tolerance and the value has returned to levels observed in 2011.

Fondeur, F.; Taylor-Pashow, K.

2013-10-31T23:59:59.000Z

258

DOE handbook: Design considerations  

SciTech Connect

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

NONE

1999-04-01T23:59:59.000Z

259

Solar Pilot Plant, Phase I. Preliminary design report. Volume V. Thermal storage subsystem. CDRL item 2  

DOE Green Energy (OSTI)

Design, specifications, and diagrams for the thermal storage subsystem for the 10-MW pilot tower focus power plant are presented in detail. The Honeywell thermal storage subsystem design features a sensible heat storage arrangement using proven equipment and materials. The subsystem consists of a main storage containing oil and rock, two buried superheater tanks containing inorganic salts (Hitec), and the necessary piping, instrumentation, controls, and safety devices. The subsystem can provide 7 MW(e) for three hours after twenty hours of hold. It can be charged in approximately four hours. Storage for the commercial-scale plant consists of the same elements appropriately scaled up. Performance analysis and tradeoff studies are included.

None

1977-05-01T23:59:59.000Z

260

Designing decommissioning into new reactor designs  

SciTech Connect

One of the lessons learned from decommissioning of existing reactors has been that decommissioning was not given much thought when these reactors were designed some three or four decades ago. Recently, the nuclear power has seen a worldwide resurgence and many new advanced reactor designs are either on the market or nearing design completion. Most of these designs are evolutionary in nature and build on the existing and proven technologies. They also incorporate many improvements and take advantage of the substantial operating experience. Nevertheless, by and large, the main factors driving the design of new reactors are the safety features, safeguards considerations, and the economic factors. With a large decommissioning experience that already exists in the nuclear industry, and with average decommissioning costs at around six hundred million dollars for each reactor in today's dollars, it is necessary that decommissioning factors also be considered as a part of the early design effort. Even though decommissioning may be sixty years down the road from the time they go on line, it is only prudent that new designs be optimized for eventual decommissioning, along with the other major considerations. (authors)

Devgun, J.S.; CHMM, Ph.D. [Nuclear Power Technologies, Sargent and Lundy LLC, Chicago, IL (United States)

2007-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Preliminary designs for ocean thermal energy conversion (OTEC) stationkeeping subsystems (SKSS). Task II. Conceptual design. Final report  

DOE Green Energy (OSTI)

The study is presented in five sections: design loads, conceptual designs, trade studies, cost analysis and concept evaluation and ranking. Extensive appendixes provide back up calculations and data to support the results. Environmental forces and yaw moments acting on the barge and spar in the various design sea states are presented including wave, wind and current effects. A parametric analysis illustrates the impact on holding power requirement of varying the return periods for operational and extreme sea state. The conceptual designs are presented for the barge followed by those for the spar, including configuration definition, performance characteristics, interfaces, areas for development, and deployment scenarios for selected concepts. The concept definition is followed by a set of trade studies that were performed to evaluate candidate anchor types and anchor leg materials. Parametric variations in anchor leg characteristics, wire-rope-to-chain length ratio for example, illustrate the influence of the significant design parameters on performance. An extensive cost analysis of the candidate SKSS concepts is presented, including cost estimates, life cycle cost scenarios leading to expected value of life cycle cost, and cost equivalence of operational failures. An evaluation of the eight SKSS concepts is presented, including assessment of performance and rankings based on risk versus cost and technology development. The appendixes include a report on the Electrical Transmission System interface, wave drift force, typical cost disbursement schedule and computer program listing, the IMODCO conceptual design report, and static configuration results.

Not Available

1979-07-27T23:59:59.000Z

262

Radiological design guide  

SciTech Connect

The purpose of this design guide is to provide radiological safety requirements, standards, and information necessary for designing facilities that will operate without unacceptable risk to personnel, the public, or the environment as required by the US Department of Energy (DOE). This design guide, together with WHC-CM-4-29, Nuclear Criticality Safety, WHC-CM-4-46, Nonreactor Facility Safety Analysis, and WHC-CM-7-5, Environmental Compliance, covers the radiation safety design requirements at Westinghouse Hanford Company (WHC). This design guide applies to the design of all new facilities. The WHC organization with line responsibility for design shall determine to what extent this design guide shall apply to the modifications to existing facilities. In making this determination, consideration shall include a cost versus benefit study. Specifically, facilities that store, handle, or process radioactive materials will be covered. This design guide replaces WHC-CM-4-9 and is designated a living document. This design guide is intended for design purposes only. Design criteria are different from operational criteria and often more stringent. Criteria that might be acceptable for operations might not be adequate for design.

Evans, R.A.

1994-08-16T23:59:59.000Z

263

Dosimetric Benefits of Intensity-Modulated Radiotherapy Combined With the Deep-Inspiration Breath-Hold Technique in Patients With Mediastinal Hodgkin's Lymphoma  

SciTech Connect

Purpose: To assess the additional benefits of using the deep-inspiration breath-hold (DIBH) technique with intensity-modulated radiotherapy (IMRT) in terms of the protection of organs at risk for patients with mediastinal Hodgkin's disease. Methods and Materials: Patients with early-stage Hodgkin's lymphoma with mediastinal involvement were entered into the study. Two simulation computed tomography scans were performed for each patient: one using the free-breathing (FB) technique and the other using the DIBH technique with a dedicated spirometer. The clinical target volume, planning target volume (PTV), and organs at risk were determined on both computed tomography scans according to the guidelines of the European Organization for Research and Treatment of Cancer. In both cases, 30 Gy in 15 fractions was prescribed. The dosimetric parameters retrieved for the statistical analysis were PTV coverage, mean heart dose, mean coronary artery dose, mean lung dose, and lung V20. Results: There were no significant differences in PTV coverage between the two techniques (FB vs. DIBH). The mean doses delivered to the coronary arteries, heart, and lungs were significantly reduced by 15% to 20% using DIBH compared with FB, and the lung V20 was reduced by almost one third. The dose reduction to organs at risk was greater for masses in the upper part of the mediastinum. IMRT with DIBH was partially implemented in 1 patient. This combination will be extended to other patients in the near future. Conclusions: Radiation exposure of the coronary arteries, heart, and lungs in patients with mediastinal Hodgkin's lymphoma was greatly reduced using DIBH with IMRT. The greatest benefit was obtained for tumors in the upper part of the mediastinum. The possibility of a wider use in clinical practice is currently under investigation in our department.

Paumier, Amaury, E-mail: amaury.paumier@igr.fr [Department of Radiation Oncology, Institut Gustave Roussy, Villejuif (France); Ghalibafian, Mithra; Gilmore, Jennifer [Department of Radiation Oncology, Institut Gustave Roussy, Villejuif (France); Beaudre, Anne [Physics Unit, Institut Gustave Roussy, Villejuif (France); Blanchard, Pierre; El Nemr, Mohammed; Azoury, Farez; Al Hamokles, Hweej [Department of Radiation Oncology, Institut Gustave Roussy, Villejuif (France); Lefkopoulos, Dimitri [Physics Unit, Institut Gustave Roussy, Villejuif (France); Girinsky, Theodore [Department of Radiation Oncology, Institut Gustave Roussy, Villejuif (France)

2012-03-15T23:59:59.000Z

264

CFD analysis and experimental investigation associated with the design of the Los Alamos nuclear materials storage facility  

Science Conference Proceedings (OSTI)

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory is being renovated for long-term storage of canisters designed to hold heat-generating nuclear materials, such as powders, ingots, and other components. The continual heat generation within the canisters necessitates a reliable cooling scheme of sufficient magnitude which maintains the stored material temperatures within acceptable limits. The primary goal of this study was to develop both an experimental facility and a computational fluid dynamics (CFD) model of a subsection of the NMSF which could be used to observe general performance trends of a proposed passive cooling scheme and serve as a design tool for canister holding fixtures. Comparisons of numerical temperature and velocity predictions with empirical data indicate that the CFD model provides an accurate representation of the NMSF experimental facility. Minor modifications in the model geometry and boundary conditions are needed to enhance its accuracy, however, the various fluid and thermal models correctly capture the basic physics.

Bernardin, J.D.; Hopkins, S.; Gregory, W.S.; Martin, R.A. [and others

1997-06-01T23:59:59.000Z

265

Quantifying the Reproducibility of Heart Position During Treatment and Corresponding Delivered Heart Dose in Voluntary Deep Inhalation Breath Hold for Left Breast Cancer Patients Treated With External Beam Radiotherapy  

SciTech Connect

Purpose: Voluntary deep inhalation breath hold (VDIBH) reduces heart dose during left breast irradiation. We present results of the first study performed to quantify reproducibility of breath hold using bony anatomy, heart position, and heart dose for VDIBH patients at treatment table. Methods and Materials: Data from 10 left breast cancer patients undergoing VDIBH whole-breast irradiation were analyzed. Two computed tomography (CT) scans, free breathing (FB) and VDIBH, were acquired to compare dose to critical structures. Pretreatment weekly kV orthogonal images and tangential ports were acquired. The displacement difference from spinal cord to sternum across the isocenter between coregistered planning Digitally Reconstructed Radiographs (DRRs) and kV imaging of bony thorax is a measure of breath hold reproducibility. The difference between bony coregistration and heart coregistration was the measured heart shift if the patient is aligned to bony anatomy. Results: Percentage of dose reductions from FB to VDIBH: mean heart dose (48%, SD 19%, p = 0.002), mean LAD dose (43%, SD 19%, p = 0.008), and maximum left anterior descending (LAD) dose (60%, SD 22%, p = 0.008). Average breath hold reproducibility using bony anatomy across the isocenter along the anteroposterior (AP) plane from planning to treatment is 1 (range, 0-3; SD, 1) mm. Average heart shifts with respect to bony anatomy between different breath holds are 2 {+-} 3 mm inferior, 1 {+-} 2 mm right, and 1 {+-} 3 mm posterior. Percentage dose changes from planning to delivery: mean heart dose (7%, SD 6%); mean LAD dose, ((9%, SD 7%)S, and maximum LAD dose, (11%, SD 11%) SD 11%, p = 0.008). Conclusion: We observed excellent three-dimensional bony registration between planning and pretreatment imaging. Reduced delivered dose to heart and LAD is maintained throughout VDIBH treatment.

McIntosh, Alyson; Shoushtari, Asal N.; Benedict, Stanley H.; Read, Paul W. [Department of Radiation Oncology, University of Virginia, Charlottesville, Virginia (United States); Wijesooriya, Krishni, E-mail: kw5wx@virginia.edu [Department of Radiation Oncology, University of Virginia, Charlottesville, Virginia (United States)

2011-11-15T23:59:59.000Z

266

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Conceptual Safety Design (CSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Conceptual Safety Design work, processes and...

267

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Final Design (FD) Review Module (RM) is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the technical sufficiency of the final design prior to CD-3...

268

Preliminary Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE))

The Preliminary Safety Design (PSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the Preliminary Safety Design work, processes and...

269

Energy design for architects  

Science Conference Proceedings (OSTI)

This book contains techniques for energy efficiency in architectural design. Many aspects are covered including: cost; comfort and health; energy use; the design process; and analytical techniques. 202 figs. (JF)

Shaw, A. (ed.)

1989-01-01T23:59:59.000Z

270

Design of intelligent interiors  

E-Print Network (OSTI)

Ubiquitous computing is transforming interior design by allowing utilities, goods and information to be delivered where and when we need them. How will new information technologies impact the design of interior spaces? ...

Bonanni, Leonardo Amerigo, 1977-

2005-01-01T23:59:59.000Z

271

Seismic Design Expectations Report  

Energy.gov (U.S. Department of Energy (DOE))

The Seismic Design Expectations Report (SDER) is a tool that assists DOE federal project review teams in evaluating the technical sufficiency of the project seismic design activities prior to...

272

Investigations in Pyranometer Design  

Science Conference Proceedings (OSTI)

Three approaches to the design of total (global) solar pyranometers that employ new technologies and materials of manufacture are described. The pyranometers are designed to meet or exceed the requirements for high quality instruments as ...

D. J. Beaubien; A. Bisberg; A. F. Beaubien

1998-06-01T23:59:59.000Z

273

Furnace Design and Operation  

Science Conference Proceedings (OSTI)

...S. Lampman, Energy-Efficient Heat-Treating Furnace Design and Operation, Heat Treating, Vol 4, ASM Handbook, ASM International,

274

Integrating Safeguards and Security with Safety into Design  

Science Conference Proceedings (OSTI)

There is a need to minimize security risks, proliferation hazards, and safety risks in the design of new nuclear facilities in a global environment of nuclear power expansion, while improving the synergy of major design features and raising operational efficiency. In 2008, the U.S. Department of Energy (DOE), National Nuclear Security Administration (NNSA) launched the Next Generation Safeguards Initiative (NGSI) covering many safeguards areas. One of these, launched by NNSA with support of the DOE Office of Nuclear Energy, was a multi-laboratory project, led by the Idaho National Laboratory (INL), to develop safeguards by design. The proposed Safeguards-by-Design (SBD) process has been developed as a structured approach to ensure the timely, efficient, and cost effective integration of international safeguards and other nonproliferation barriers with national material control and accountability, physical security, and safety objectives into the overall design process for the nuclear facility lifecycle. A graded, iterative process was developed to integrate these areas throughout the project phases. It identified activities, deliverables, interfaces, and hold points covering both domestic regulatory requirements and international safeguards using the DOE regulatory environment as exemplar to provide a framework and guidance for project management and integration of safety with security during design. Further work, reported in this paper, created a generalized SBD process which could also be employed within the licensed nuclear industry and internationally for design of new facilities. Several tools for integrating safeguards, safety, and security into design are discussed here. SBD appears complementary to the EFCOG TROSSI process for security and safety integration created in 2006, which focuses on standardized upgrades to enable existing DOE facilities to meet a more severe design basis threat. A collaborative approach is suggested.

Robert S. Bean; John W. Hockert; David J. Hebditch

2009-05-01T23:59:59.000Z

275

Participation in design things  

Science Conference Proceedings (OSTI)

This paper discusses the design of things. This is done in an attempt to conceptually explore some of the political and practical challenges to participatory design today. Which things, and which participants? The perspective is strategic and conceptual. ... Keywords: design, object, participation, public, thing, use

Pelle Ehn

2008-10-01T23:59:59.000Z

276

Wet Stacks Design Guide  

Science Conference Proceedings (OSTI)

The expense of fluegas reheat has led to increased application of less expensive wet stacks downstream of wet FGD (flue gas desulfurization) systems. Good data is necessary to properly design the wet stack system or serious problems can occur. This design guide summarizes all the latest information and provides guidance on developing detailed design specifications.

1997-01-04T23:59:59.000Z

277

Attached sunspace design analysis  

DOE Green Energy (OSTI)

An introduction to new design analysis information for attached sunspaces is presented. The 28 sunspace reference designs are described. Note is taken of those designs (the semi-enclosed geometries) analyzed more recently than the previously published reports. The role of sensitivity studies is discussed, and some sample plots of sunspace performance sensitivity to key design parameters are presented. The monthly solar load ratio (SLR) correlations are reviewed with emphasis on the modified SLR used in the sunspace analysis. The application of the sunspace SLR correlations to monthly design analysis is outlined.

Jones, R.W.; McFarland, R.D.

1981-01-01T23:59:59.000Z

278

Final Beamline Design Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Final Beamline Design Report Final Beamline Design Report Guidelines and Review Criteria (SCD 1.20.95) 6.0 Final Beamline Design Report (FDR) Overview The Final Beamline Design Report is part of the Advanced Photon Source (APS) beamline review process and should be planned for when approximately 90% of the total beamline design has been completed. Fifteen copies of the FDR are to be submitted to the APS Users Office. Approval of the Collaborative Access Team's (CAT) designs described in the report is required prior to installation of beamline components in the APS Experiment Hall. Components that have a long lead time for design or procurement can be reviewed separately from the remainder of the beamline, but enough information must be provided so that the reviewer can understand the

279

Visualization Design Environment  

SciTech Connect

Improvements in the performance and capabilities of computer software and hardware system, combined with advances in Internet technologies, have spurred innovative developments in the area of modeling, simulation and visualization. These developments combine to make it possible to create an environment where engineers can design, prototype, analyze, and visualize components in virtual space, saving the time and expenses incurred during numerous design and prototyping iterations. The Visualization Design Centers located at Sandia National Laboratories are facilities built specifically to promote the ''design by team'' concept. This report focuses on designing, developing and deploying this environment by detailing the design of the facility, software infrastructure and hardware systems that comprise this new visualization design environment and describes case studies that document successful application of this environment.

Pomplun, A.R.; Templet, G.J.; Jortner, J.N.; Friesen, J.A.; Schwegel, J.; Hughes, K.R.

1999-02-01T23:59:59.000Z

280

The Building Design Advisor  

SciTech Connect

The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA.

Papamichael, K.; LaPorta, J.; Chauvet, H.; Collins, D.; Trzcinski, T.; Thorpe, J.; Selkowitz, S.

1996-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Building Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Building Design October 16, 2013 - 4:41pm Addthis Planning, Programming & Budgeting Building Design Project Construction Integrating renewable energy within Federal new construction or major renovations is critical at each phase of the design process. This overview covers considerations for renewable energy in the design phases of a construction project, including choosing the design team, the design team charrette, preliminary design, schematic design, design development, and construction documents. Information on this page introduces each of the design phases and provides a link to deeper-level information. Key Actions in Building Design Require specific renewable energy experience and skills for design team. Prioritize energy-related program

282

Robust copyright marking using Weibull distribution  

Science Conference Proceedings (OSTI)

For multimedia document, watermarking provides many advantages; however, its vulnerability due to attacks using signal processing methods offers challenge in designing robust techniques. This paper presents a novel method for enhancing robustness in ...

Harsh V. Singh; Suresh Rai; Anand Mohan; Surya P. Singh

2011-09-01T23:59:59.000Z

283

Central ballast tanker design  

SciTech Connect

The purpose of this paper is to present the CENTRAL BALLAST TANKER Design. This design is intended to reduce the volume of oil spilled from tankers by giving the crew a tanker properly designed and equipped to allow large quantities of oil from ruptured tank(s) to flow safely to a fully-inerted central ballast tank. In addition to reducing the volume of oil spilled, the design also addresses many of the shortcomings of the DOUBLE HULL DESIGN which are increasingly becoming a concern. The following is a brief review of the development of the CENTRAL BALLAST TANKER. The simple operational features, stability, low cost and ease of maintenance of the single hull tanker were important and can be retained with the CENTRAL BALLAST DESIGN.

1997-01-01T23:59:59.000Z

284

Pre-physical data base design heuristics  

Science Conference Proceedings (OSTI)

Keywords: data base, data base design, data base management, data model, denormalization, design improvement, design refinement, physical design, system design

Narciso Cerpa

1995-06-01T23:59:59.000Z

285

Dwell on Design [Dispatches  

E-Print Network (OSTI)

use, and urban design. Toyota USA, Inc. , provided majorE)MergingThoughts The support from Toyota was par- ticularlyyears. For companies like Toyota, this transformation to a

Sullivan, Lisa

2007-01-01T23:59:59.000Z

286

PREFACE THE DESIGN MANUAL  

E-Print Network (OSTI)

developed and adopted a series of documents that describe the codes, standards, details, products, and practices to be followed by Architect/Engineers (A/Es). These documents apply to all design of construction at all facilities on property owned by the Authority. Facilities constructed or modified on the site occupied by the National Air and Space Museum located at Washington Dulles International Airport are exempt from the requirements of the Authority Design Manual. The Design Manual has been developed to assist Architects/Engineers (A/Es) in understanding the practices and policies that must be incorporated into each project. The Design Manual contains a number of specific requirements that must be followed on all projects, as described above. These can be either Authority contracted projects, Authority direct-constructed projects, and tenant contracted projects. APPLICABILITY OF THE DESIGN MANUAL The requirements for design and construction incorporated into the Design Manual and Supporting Volumes are regulations approved by the Metropolitan Washington Airports Authority Board of Directors and shall be considered contract requirements for all A/Es who are performing services under contract to the Authority. Although A/Es who are under contract to tenants of the Authority may not be working under contract provisions that make compliance with these requirements mandatory, the Authority reserves the right, as Owner of all airport facilities, and land on which tenant buildings are constructed, to reject any design or work that does not comply with the requirements of the Design Manual and its

unknown authors

2010-01-01T23:59:59.000Z

287

Interior Design Sample Occupations  

E-Print Network (OSTI)

Companies Historic Preservation Agencies Hospitals Interior Design Firms/Studios Hotel Chains Cost Estimator Architect Manufacturer's Representative Schools Television and Motion Picture Studios Theatres Utilities

Ronquist, Fredrik

288

The LCLS Design Group  

NLE Websites -- All DOE Office Websites (Extended Search)

R-593 April 2002 UC-414 Linac Coherent Light Source (LCLS) Conceptual Design Report Published April 2002 Prepared for the Department of Energy under contract number...

289

`Opto-chip' breaks speed records Scientist Larry Dalton holds a circuit containing an opto-chip. The device itself is  

E-Print Network (OSTI)

of nine years of research into new ways to convert light transmitted by fiber-optic lines into electrical, cable or wireless systems. This new type of electro-optic modulator is designed to link up with high-speed fiber-optic lines or satellites. More 'Tools and Toys' Productivity and fun rolled into one · Click here

Washington at Seattle, University of

290

Industrial experience with design patterns  

Science Conference Proceedings (OSTI)

A design pattern is a particular prose form of recording design information such that designs which have worked well in the past can be applied again in similar situations in the future. The availability of a collection of design patterns can help both ... Keywords: best practices, design information recording, design patterns, design reuse, industrial experience, information sharing, software architecture documentation, software reusability, system documentation

Kent Beck; Ron Crocker; Gerard Meszaros; John Vlissides; James O. Coplien; Lutz Dominick; Frances Paulisch

1996-05-01T23:59:59.000Z

291

A practical generative design method  

Science Conference Proceedings (OSTI)

A generative CAD based design exploration method is proposed. It is suitable for complex multi-criteria design problems where important performance criteria are uncomputable. The method is based on building a genotype of the design within a history based ... Keywords: Computer aided conceptual design, Evolutionary design, Generative design, Parametric design

Sivam Krish

2011-01-01T23:59:59.000Z

292

Communication Reliability in Network on Chip Designs  

E-Print Network (OSTI)

The performance of low latency Network on Chip (NoC) architectures, which incorporate fast bypass paths to reduce communication latency, is limited by crosstalk induced skewing of signal transitions on link wires. As a result of crosstalk interactions between wires, signal transitions belonging to the same flit or bit vector arrive at the destination at different times and are likely to violate setup and hold time constraints for the design. This thesis proposes a two-step technique: TransSync- RecSync, to dynamically eliminate packet errors resulting from inter-bit-line transition skew. The proposed approach adds minimally to router complexity and involves no wire overhead. The actual throughput of NoC designs with asynchronous bypass designs is evaluated and the benefits of augmenting such schemes with the proposed design are studied. The TransSync, TransSync-2-lines and RecSync schemes described here are found to improve the average communication latency by 26%, 20% and 38% respectively in a 7X7 mesh NoC with asynchronous bypass channel. This work also evaluates the bit-error ratio (BER) performance of several existing crosstalk avoidance and error correcting schemes and compares them to that of the proposed schemes. Both TransSync and RecSync scheme are dynamic in nature and can be switched on and off on-the-fly. The proposed schemes can therefore be employed to impart unequal error protection (UEP) against intra-flit skewing on NoC links. In the UEP, a larger fraction of the energy budget is spent in providing protection to those parts of the data being transmitted on the link which have a higher priority, while expending smaller effort in protecting relatively less important parts of the data. This allows us to achieve the prescribed level of performance with lower levels of power. The benefits of the presented technique are illustrated using an H.264 video decoder system-on-chip (SoC) employing NoC architecture. We show that for Akyio test streams transmitted over 3mm long link wires, the power consumption can be reduced by as much as 20% at the cost of an acceptable degradation in average peak signal to noise ratio (PSNR) with UEP.

Kumar, Reeshav

2011-08-01T23:59:59.000Z

293

STEAM GENERATOR PRELIMINARY DESIGN  

SciTech Connect

A conceptual study on design of sodium-cooled reactor steam generators was conducted. Included is a detailed description of the preliminary design and analysis, based on the use of known materials and existing methods of fabrication. (See also APAE-41 Vols. I and III.) (J.R.D.)

1959-02-28T23:59:59.000Z

294

Blocking response surface designs  

Science Conference Proceedings (OSTI)

The design of experiments involving more than one blocking factor and quantitative explanatory variables is discussed, the focus being on two key aspects of blocked response surface designs: optimality and orthogonality. First, conditions for orthogonally ... Keywords: D-optimality, Exchange algorithm, Fixed blocks, Orthogonality, Random blocks

P. Goos; A. N. Donev

2006-11-01T23:59:59.000Z

295

Energy and lighting design  

SciTech Connect

A detailed examination of the current energy conservation practices for lighting systems is presented. This first part of a two-part presentation covers the following: energy and lighting design; lighting and energy standards; lighting efficiency factors; light control and photometrics; lighting and the architectural interior; luminaire impact on the environment; basic design techniques; the lighting power budget; and conservation through control.

Helms, R.N.

1979-11-01T23:59:59.000Z

296

Reading context in design  

E-Print Network (OSTI)

This study explores how, in the process of design, the reading of an existing order in the organizing features of a setting potentiates form. For this purpose, a design exercise on a site in the city of Jaipur in India has ...

Agrawal, Vivek

1993-01-01T23:59:59.000Z

297

Designing creative artificial systems  

Science Conference Proceedings (OSTI)

Can artificial systems be creative? Can they be designed to be creative on their own? What are the requirements of such creative artificial systems? To be able to support humans who are expected to deliver creative solutions, or to automate part of their ... Keywords: Agent, Creativity, Design, Interactivity, Learning, Self-Organization

Pieter H. G. Van Langen; Niek J. E. Wijngaards; Frances M. T. Brazier

2004-06-01T23:59:59.000Z

298

Graphite design handbook  

Science Conference Proceedings (OSTI)

The objectives of the Graphite Design Handbook (GDH) are to provide and maintain a single source of graphite properties and phenomenological model of mechanical behavior to be used for design of MHTGR graphite components of the Reactor System, namely, core support, permanent side reflector, hexagonal reflector elements, and prismatic fuel elements; to provide a single source of data and material models for use in MHTGR graphite component design, performance, and safety analyses; to present properties and equations representing material models in a form which can be directly used by the designer or analyst without the need for interpretation and is compatible with analytical methods and structural criteria used in the MHTGR project, and to control the properties and material models used in the MHTGR design and analysis to proper Quality Assurance standards and project requirements. The reference graphite in the reactor internal components is the nuclear grade 2020. There are two subgrades of interest, the cylinder nuclear grade and the large rectangular nuclear grade. The large rectangular nuclear grade is molded in large rectangular blocks. It is the reference material for the permanent side reflector and the central column support structure. The cylindrical nuclear grade is isostatically pressed and is intended for use as the core support component. This report gives the design properties for both H-451 and 2020 graphite as they apply to their respective criteria. The properties are presented in a form for design, performance, and safety calculations that define or validate the component design. 103 refs., 20 figs., 19 tabs.

Ho, F.H.

1988-09-01T23:59:59.000Z

299

Architectural design for reliability  

DOE Green Energy (OSTI)

Design-for-reliability concepts can be applied to the products of the construction industry, which includes buildings, bridges, transportation systems, dams, and other structures. The application of a systems approach to designing in reliability emphasizes the importance of incorporating uncertainty in the analyses, the benefits of optimization analyses, and the importance of integrating reliability, safety, and security. 4 refs., 3 figs.

Cranwell, R.M.; Hunter, R.L.

1997-08-01T23:59:59.000Z

300

Energy manager design for microgrids  

E-Print Network (OSTI)

Energy Manager Design for Microgrids Hillier, F. , and G.Energy Manager Design for Microgrids Appendix A: Smart*DER:Manager Design for Microgrids Prepared for the California

Firestone, Ryan; Marnay, Chris

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Life-Changing Drug Design  

NLE Websites -- All DOE Office Websites (Extended Search)

facilities are aimed at designing more effective drugs with fewer side effects. Life-Changing Drug Design One notable example is vemurafenib, a drug designed by...

302

FATIGUE DESIGN CURVES FOR  

Office of Scientific and Technical Information (OSTI)

FATIGUE DESIGN CURVES FATIGUE DESIGN CURVES FOR 6061-T6 ALUMINUM* G . T . Yahr Engineering Technology Division Oak Ridge National Laboratory Oak Ridge, Tennessee 37831-8051 ABSTRACT A request has been made to the ASME Boiler and Pressure Vessel Committee that 6061-T6 aluminum be approved for use in the construction of Class 1 welded nuclear vessels so it can be used for the pressure vessel of the Advanced Neutron Source research reactor. Fatigue design curves with and without mean stress effects have been proposed. A knock-down factor of two is applied to the design curve for evaluation of welds. The basis of the curves is explained. The fatigue design curves are compared to fatigue data from base metal and weldments. DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States

303

Beyond Design Basis Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Beyond Design Basis Events Beyond Design Basis Events Following the March 2011 Fukushima Daiichi nuclear plant accident in Japan, DOE embarked upon several initiatives to investigate the safety posture of its nuclear facilities relative to beyond design basis events (BDBEs). These initiatives included issuing Safety Bulletin 2011-01, Events Beyond Design Safety Basis Analysis, and conducting two DOE nuclear safety workshops. DOE also issued two reports documenting the results of these initiatives: Review of Requirements and Capabilities for Analyzing and Responding to BDBEs, August 2011, and Report to the Secretary of Energy on Beyond Design Basis Event Pilot Evaluations, Results and Recommendations for Improvements to Enhance Nuclear Safety at DOE Nuclear Facilities, January 2013.

304

Final Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Final Design Review Module Final Design Review Module March 2010 CD-0 [This Rev Design Re O 0 view Module w eview of the OR OFFICE OF C CD-1 was used to dev R U 233 Dispo F ENVIRO Standard R Fin Rev Critical Decis CD-2 M velop the Revie osition Project ONMENTAL Review Plan al Design view Module sion (CD) Ap CD March 2010 ew Plan for 90% in 2009. Lesso Module.] L MANAGE n (SRP) n e pplicability D-3 % Design Revi ons learned hav EMENT CD-4 iew of SWPF i ve been incorpo Post Ope in 2008 and for orated in the R eration r 60% Review Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively.

305

Beam director design report  

Science Conference Proceedings (OSTI)

A design and fabrication effort for a beam director is documented. The conceptual design provides for the beam to pass first through a bending and focusing system (or ''achromat''), through a second achromat, through an air-to-vacuum interface (the ''beam window''), and finally through the vernier steering system. Following an initial concept study for a beam director, a prototype permanent magnet 30/sup 0/ beam-bending achromat and prototype vernier steering magnet were designed and built. In volume II, copies are included of the funding instruments, requests for quotations, purchase orders, a complete set of as-built drawings, magnetic measurement reports, the concept design report, and the final report on the design and fabrication project. (LEW)

Younger, F.C.

1986-08-01T23:59:59.000Z

306

Cooperative Modeling and Design History Tracking Using Design Tracking Matrix  

E-Print Network (OSTI)

This thesis suggests a new framework for cooperative modeling which supports concurrency design protocol with a design history tracking function. The proposed framework allows designers to work together while eliminating design conflicts and redundancies, and preventing infeasible designs. This framework provides methods to track optimal design path and redundant design history in the overall design process. This cooperative modeling architecture consists of a modeling server and voxel-based multi-client design tool. Design change among server and multiple clients are executed using the proposed concurrency design protocol. The design steps are tracked and analyzed using Design Tracking Graph and Design Tracking Matrix (DTM), which provide a design data exchange algorithm allowing seamless integration of design modifications between participating designers. This framework can be used for effective cooperative modeling, and helps identify and eliminate conflicts and minimize delay. The proposed algorithm supports effective cooperative design functions. First, it provides a method to obtain the optimal design path which can be stored in a design library and utilized in the future design. Second, it helps capture modeling pattern which can be used for analyzing designer's performance. Finally, obtained redundancies can be used to evaluate designer?s design efficiency.

Kim, Jonghyun

2009-08-01T23:59:59.000Z

307

The P3 Platform: An approach and software system for developing diagrammatic model-based methods in design research  

E-Print Network (OSTI)

parameter-driven task-based model of the design process. Research in Engineering Design, 12(1), 2000, pp. 18-38. Contact: David Wynn University of Cambridge Department of Engineering Trumpington Street Cambridge. CB2 1PZ United Kingdom. Email: dcw24... @cam.ac.uk URL: http://www-edc.eng.cam.ac.uk/people/dcw24.html Dr. David Wynn holds an MEng in Engineering and Computing Science from the University of Oxford and a PhD from the University of Cambridge. He is now a Research Associate in the Cambridge...

Wynn, David C; Nair, Seena MT; Clarkson, P John

308

Cryogenic design of the liquid helium experiment ``critical dynamics in microgravity``  

Science Conference Proceedings (OSTI)

Although many well controlled experiments have been conducted to measure the static properties of systems near criticality, few experiments have explored the transport properties in systems driven far away from equilibrium as a phase transition occurs. The cryogenic design of an experiment to study the dynamic aspect of critical phenomena is reported here. Measurements of the thermal gradient across the superfluid (He II) -- normal fluid (He I) interface in helium under microgravity conditions will be performed as a heat flux holds the system away from equilibrium. New technologies are under development for this experiment, which is in the definition phase for a space shuttle flight.

Moeur, W.A. [New Mexico Univ., Albuquerque, NM (United States); Adriaans, M.J.; Boyd, S.T. [Sandia National Labs., Albuquerque, NM (United States); Strayer, D.M. [Jet Propulsion Lab., Pasadena, CA (United States); Duncan, R.V. [New Mexico Univ., Albuquerque, NM (United States)]|[Sandia National Labs., Albuquerque, NM (United States)

1995-10-01T23:59:59.000Z

309

The Design Procedure Language Manual  

E-Print Network (OSTI)

This manual describes the Design Procedure Language (DPL) for LSI design. DPL creates and maintains a representation of a design in a hierarchically organized, object-oriented LISP data-base. Designing in DPL involves ...

Batali, John

1980-09-01T23:59:59.000Z

310

Passive solar design handbook  

DOE Green Energy (OSTI)

The Passive Solar Design Handbook, Volume Three updates Volume Two by presenting extensive new data on the optimum mix of conservation and solar direct gain, sunspaces, thermal storage walls, and solar radiation. The direct gain, thermal storage wall, and solar radiation data are greatly expanded relative to the Volume 2 coverage. The needed flexibility to analyze a variety of system designs is accommodated by the large number of reference designs to be encompassed - 94 in contrast to 6 in Volume two - and the large amount of sensitivity data for direct gain and sunspace systems - approximately 1100 separate curves.

Jones, R.W.

1981-01-01T23:59:59.000Z

311

Rampressor Turbine Design  

DOE Green Energy (OSTI)

The design of a unique gas turbine engine is presented. The first Rampressor Turbine engine rig will be a configuration where the Rampressor rotor is integrated into an existing industrial gas turbine engine. The Rampressor rotor compresses air which is burned in a traditional stationary combustion system in order to increase the enthalpy of the compressed air. The combustion products are then expanded through a conventional gas turbine which provides both compressor and electrical power. This in turn produces shaft torque, which drives a generator to provide electricity. The design and the associated design process of such an engine are discussed in this report.

Ramgen Power Systems

2003-09-30T23:59:59.000Z

312

Infrastructure for Integrated Electronics Design & ...  

Science Conference Proceedings (OSTI)

Infrastructure for Integrated Electronics Design & Manufacturing (IIEDM) Project. ... designed to support distributed supply chain integration and e ...

2010-11-05T23:59:59.000Z

313

2003 CBECS Sample Design  

U.S. Energy Information Administration (EIA) Indexed Site

Technical Information > Sample Design Technical Information > Sample Design How the Survey Was Conducted 2003 Commercial Buildings Energy Consumption Survey: Sample Design Introduction The Commercial Buildings Energy Consumption Survey (CBECS) is conducted quadrennially by the Energy Information Administration (EIA) to provide basic statistical information about energy consumption and expenditures in U.S. commercial buildings and information about energy-related characteristics of these buildings. The survey is based upon a sample of commercial buildings selected according to the sample design requirements described below. A “building,” as opposed to an “establishment,” is the basic unit of analysis for the CBECS because the building is the energy-consuming unit. The 2003 CBECS was the eighth survey conducted since 1979

314

Nuclear Facility Design  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design FUNCTIONAL AREA GOAL: Headquarters and Field organizations and their contractors ensure that nuclear facilities are designed to assure adequate protection for the public, workers, and the environment from nuclear hazards. REQUIREMENTS:  10 CFR 830.120  10 CFR 830 subpart B  DOE O 413.3  DOE O 420.1B  DOE O 414.1C  DOE O 226.1  DOE M 426.1  DEAR 970-5404-2 Guidance:  DOE G 420.1-1  Project Management Practices, Integrated Quality ( Rev E, June 2003)  DOE Implementation Plan for DNSB Recommendation 2004-2 Performance Objective 1: Contractor Program Documentation Contracts between and the contractors who operate nuclear facilities contain adequate requirements concerning the conduct of nuclear facility safety design for nuclear facility capital projects and major modifications and the

315

Transformation inverse design  

E-Print Network (OSTI)

We present a new technique for the design of transformation-optics devices based on large-scale optimization to achieve the optimal effective isotropic dielectric materials within prescribed index bounds, which is ...

Liu, David

316

Design considerations for MRAM  

Science Conference Proceedings (OSTI)

MRAM (magnetic random access memory) technology, based on the use of magnetic tunnel junctions (MTJs) as memory elements, is a potentially fast nonvolatile memory technology with very high write endurance. This paper is an overview of MRAM design considerations. ...

T. M. Maffitt; J. K. DeBrosse; J. A. Gabric; E. T. Gow; M. C. Lamorey; J. S. Parenteau; D. R. Willmott; M. A. Wood; W. J. Gallagher

2006-01-01T23:59:59.000Z

317

Design of nanomanufacturing systems  

E-Print Network (OSTI)

Over 100 years of manufacturing knowledge and experience are available to a design engineer when considering the integration of a machine tool enabling macro-scale processes (milling, turning, welding, water-jet cutting) ...

Slocum, Alexander Henry, Jr

2010-01-01T23:59:59.000Z

318

Service oriented architectural design  

Science Conference Proceedings (OSTI)

We propose Architectural Design Rewriting (ADR), an approach to formalise the development and reconfiguration of software architectures based on term-rewriting. An architectural style consists of a set of architectural elements and operations called ...

R. Bruni; A. Lluch Lafuente; U. Montanari; E. Tuosto

2007-11-01T23:59:59.000Z

319

Safety Design Strategy RM  

Energy.gov (U.S. Department of Energy (DOE))

The SDS Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the conceptual safety design strategy documentation package (Conceptual Safety...

320

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE))

This Review Module is a tool that assists Department of Energy (DOE) federal project review teams in evaluating the adequacy of the conceptual design package prior to CD-1 approval. It focuses on...

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

DESIGN [fabrication] BUILD  

E-Print Network (OSTI)

DESIGN [fabrication] BUILD proposes a new relationship among the architect, homeowner, and fabricator/assembler through the use of parametric software in order to create a truly customizable prefabricated home. This ...

Rader, Nicolas Glen

2006-01-01T23:59:59.000Z

322

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Prototyping -- Desktop 3D Printing The Design & Drafting Group has an Objet30 Pro 3D printer that provides the accuracy and versatility of a high-end rapid prototyping machine...

323

Expert assistants for design  

Science Conference Proceedings (OSTI)

Two expert programs currently under development at the Los Alamos National Laboratory, PROCON and the Designer's Apprentice, are briefly described. Both codes define interface to simulations that provide a wide variety of information about the performance of complex devices. (BCS)

Aldridge, J.; Cerutti, J.; Draisin, W.; Steuerwalt, M.

1986-01-01T23:59:59.000Z

324

Neighborhood design for Cambridge  

E-Print Network (OSTI)

This thesis examines the problem of modest high-density low-rise housing design for a site in Cambridge, Massachusetts. It considers first the general changes in housing demand and the housing industry which have made it ...

Reynolds, Margaret (Margaret Philpott Ray), 1953-

1981-01-01T23:59:59.000Z

325

Alternative energy design toolkit  

E-Print Network (OSTI)

This thesis concerns the concepts, structure, and applications of the Alternative Energy Design Toolkit. The toolkit is aimed to provide a widely accessible, easy to use, flexible, yet powerful modeling environment for ...

Sukkasi, Sittha

2004-01-01T23:59:59.000Z

326

Designing building skins  

E-Print Network (OSTI)

This thesis involves framing criteria and discerning issues to be considered in the design of building skins in an urban environment. The 'information age' has paradoxically seen the demise of the facade as an important ...

Desai, Arjun

1992-01-01T23:59:59.000Z

327

Advanced Energy Design Guides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

One way to influence above-code One way to influence above-code exemplary energy performance in commercial buildings is to provide architects, engineers, and other design practitioners prescriptive guidance that indicates, measure by measure, how to do it. To this end, the U.S. Department of Energy (DOE) actively supports development of a series of AEDGs- publications designed to provide recommendations for achieving 30 to 50

328

Designing Competitive Electricity Markets  

Science Conference Proceedings (OSTI)

This volume contains papers that were discussed at the first workshop on Markets for Electricity: Economics and Technology (MEET) held at Stanford University on March 7-8, 1997. The workshop's focus was how to design competitive electricity markets in an industry undergoing rapid changes in both economics and technology. The intended audience includes policy makers, policy-oriented academics, and corporate leaders. Chapters include: Introduction: Economic and Technological Principles in Designing Power M...

1998-12-19T23:59:59.000Z

329

AETR NUCLEAR MOCKUP DESIGN  

SciTech Connect

The Advanced Engineering Test Reactor (AETR) nuclear mockup is designed to be a flexible, inexpensive developmental facility which duplicates the reactor portion of the AETR and which would be used to verify the operation of reactor controls. The mockup would also furnish measurements of temperature and void coefficients, flux shapes, and critical mass, and facilitate a reliable AETR design in a minimum time, and with minimum development cost. For even greater usefulness, the mockup is also designed for use in conjunction with an operating AETR to check the reactivity of experiments and fuel assemblies, and for other annular core reactor development purposes. In these respects, the mockup design embodies the concepts for a very low power nuclear auxiliary outlined in an earlier report. Detail design was limited to the reactor assembly and control systems and it is assumed that a simple building with supporting facilities may be readily supplied by private industry or the AEC. Results of negotiations with potential vendors and fabricators, a description of the facility components, and design drawings suitable for contractor use are presented. Preliminary quotations from fabricators and suppliers indicate that the facility can be in operation within an eight month period at a total cost not exceeding

Leonard, B.H.; Bertelson, P.C.; Kornfeld, M.J.; Wade, E.E.

1959-10-01T23:59:59.000Z

330

Design documentation: Krypton encapsulation preconceptual design  

Science Conference Proceedings (OSTI)

US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy.

Knecht, D.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1994-10-01T23:59:59.000Z

331

Silo Storage Preconceptual Design  

Science Conference Proceedings (OSTI)

The National Nuclear Security Administration (NNSA) has a need to develop and field a low-cost option for the long-term storage of a variety of radiological material. The storage options primary requirement is to provide both environmental and physical protection of the materials. Design criteria for this effort require a low initial cost and minimum maintenance over a 50-year design life. In 1999, Argonne National Laboratory-West was tasked with developing a dry silo storage option for the BN-350 Spent Fuel in Aktau Kazakhstan. Argons design consisted of a carbon steel cylinder approximately 16 ft long, 18 in. outside diameter and 0.375 in. wall thickness. The carbon steel silo was protected from corrosion by a duplex coating system consisting of zinc and epoxy. Although the study indicated that the duplex coating design would provide a design life well in excess of the required 50 years, the review board was concerned because of the novelty of the design and the lack of historical use. In 2012, NNSA tasked Idaho National Laboratory (INL) with reinvestigating the silo storage concept and development of alternative corrosion protection strategies. The 2012 study, Silo Storage Concepts, Cathodic Protection Options Study (INL/EST-12-26627), concludes that the option which best fits the design criterion is a passive cathotic protection scheme, consisting of a carbon steel tube coated with zinc or a zinc-aluminum alloy encapsulated in either concrete or a cement grout. The hot dipped zinc coating option was considered most efficient, but the flame-sprayed option could be used if a thicker zinc coating was determined to be necessary.

Stephanie L. Austad; Patrick W. Bragassa; Kevin M Croft; David S Ferguson; Scott C Gladson; Annette L Shafer; John H Weathersby

2012-09-01T23:59:59.000Z

332

Advanced Design Studies  

Science Conference Proceedings (OSTI)

The ARIES-CS project was a multi-year multi-institutional pro ject to assess the feasibility of a compact stellarator as a fusion power plant. The work herein describes efforts to help design one aspect of the device, the divertor, which is responsible for the removal of particle and heat flux from the system, acting as the first point of contact between the magnetically confined hot plasma and the outside world. Specifically, its location and topology are explored, extending previous work on the sub ject. An optimized design is determined for the thermal particle flux using a suite of 3D stellarator design codes which trace magnetic field lines from just inside the confined plasma edge to their strike points on divertor plates. These divertor plates are specified with a newly developed plate design code. It is found that a satisfactory thermal design exists which maintains the plate temperature and heat load distribution below tolerable engineering limits. The design is unique, including a toroidal taper on the outboard plates which was found to be important to our results. The maximum thermal heat flux for the final design was 3.61 M W/m2 and the maximum peaking factor was 10.3, below prescribed limits of 10 M W/m2 and 15.6, respectively. The median length of field lines reaching the plates is about 250 m and their average angle of inclination to the surface is 2? . Finally, an analysis of the fast alphas, resulting from fusion in the core, which escape the plasma was performed. A method is developed for obtaining the mapping from magnetic coordinates to real-space coordinates for the ARIES-CS. This allows the alpha exit locations to be identified in real space for the first time. These were then traced using the field line algorithm as well as a guiding center routine accounting for their mass, charge, and specific direction and energy. Results show that the current design is inadequate for accommodating the alpha heat flux, capturing at most 1/3 of lost alphas. However the distribution of the alphas on the device first wall indicates that a viable solution likely exists. It is noted that future designs must be sought which specifically address the fusion alphas through an integrated approach involving physics and engineering teams.

Steiner, Don [Rensselaer Polytechnic Institute

2012-12-01T23:59:59.000Z

333

Safety Design Strategy RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Design Strategy Review Module Safety Design Strategy Review Module March 2010 OFFICE OF ENVIRONMENTAL MANAGEMENT Standard Review Plan (SRP) Safety Design Strategy (SDS) Review Module Critical Decision (CD) Applicability CD-0 CD-1 CD-2 CD-3 CD-4 Post Operation March 2010 Standard Review Plan, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

334

Preliminary Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Safety Design Review Module Preliminary Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF Pr C CD-1 F ENVIRO Standard R reliminar Rev Critical Decis CD-2 M ONMENTAL Review Plan ry Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

335

Seismic Design Expectations Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seismic Design Expectations Report Seismic Design Expectations Report March 2010 CD- This Rev of th Se -0 view Module w he overall Cons OFFICE O eismic De C CD-1 was used to dev struction Projec inco OF ENVIRO Standard esign Exp Critical Deci CD-2 M velop the Revie ct Review cond orporated in the ONMENTA Review Pla pectation ision (CD) A C March 2010 ew Plan for the ducted in 2009 e current versio AL MANAG an (SRP) ns Report Applicability D-3 e Oak Ridge Bl 9. Lessons lear on of the Modu GEMENT t (SDER) CD-4 ldg. 3019 60% rned from this r ule. ) Post Ope design review review have be eration w as part een Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental

336

Conceptual Safety Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Safety Design Review Module Conceptual Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF C C CD-1 F ENVIRO Standard R Conceptua Rev Critical Decis CD-2 M ONMENTAL Review Plan al Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital

337

OOTW Force Design Tools  

Science Conference Proceedings (OSTI)

This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

Bell, R.E.; Hartley, D.S.III; Packard, S.L.

1999-05-01T23:59:59.000Z

338

MEIC Design Progress  

SciTech Connect

This paper will report the recent progress in the conceptual design of MEIC, a high luminosity medium energy polarized ring-ring electron-ion collider at Jefferson lab. The topics and achievements that will be covered are design of the ion large booster and the ERL-circulator-ring-based electron cooling facility, optimization of chromatic corrections and dynamic aperture studies, schemes and tracking simulations of lepton and ion polarization in the figure-8 collider ring, and the beam-beam and electron cooling simulations. A proposal of a test facility for the MEIC electron cooler will also be discussed.

Zhang, Y; Douglas, D; Hutton, A; Krafft, G A; Li, R; Lin, F; Morozov, V S; Nissen, E W; Pilat, F C; Satogata, T; Tennant, C; Terzic, B; Yunn, C; Barber, D P; Filatov, Y; Hyde, C; Kondratenko, A M; Manikonda, S L; Ostroumov, P N

2012-07-01T23:59:59.000Z

339

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

340

Remote Systems Design & Deployment  

Science Conference Proceedings (OSTI)

The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNLs experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNLs work experiences, and the work of others in the national laboratory complex.

Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

2009-08-28T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

CML: Evolution and Design  

E-Print Network (OSTI)

to the adoption of the simpler XOM model. None of this had an immediate effect on the surface schema of CML but has had deep influences on the subsequent design. 18 As a result of this, we developed the attributes and elements largely independently... that these correspond to different peaks. It was this type of experience that led us to propose an extremely flexible content model, constrained by the use of convention rather than XSD technology. The context-free attribute design has been largely successful...

Murray-Rust, Peter; Rzepa, Henry S

2011-07-04T23:59:59.000Z

342

Design patterns in FPS levels  

Science Conference Proceedings (OSTI)

Level designers create gameplay through geometry, AI scripting, and item placement. There is little formal understanding of this process, but rather a large body of design lore and rules of thumb. As a result, there is no accepted common language for ... Keywords: design patterns, game design, level design

Kenneth Hullett; Jim Whitehead

2010-06-01T23:59:59.000Z

343

STANDARD DESIGN CRITERIA  

DOE Patents (OSTI)

Hanford Atomic Production Operation specification gaides for design criteria, structural engineering, civil engineering, heating, ventilation, air conditioning, fire alarm systems, noise control, lighting, railroad construction, corrosion protection, and electrical engineering are presented. Details of this manual are given in TID-4100 (Suppl.). (N.W.R.)

None

1963-01-01T23:59:59.000Z

344

FHR Generic Design Criteria  

SciTech Connect

The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC)based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

Flanagan, G.F.; Holcomb, D.E.; Cetiner, S.M.

2012-06-15T23:59:59.000Z

345

FHR Generic Design Criteria  

Science Conference Proceedings (OSTI)

The purpose of this document is to provide an initial, focused reference to the safety characteristics of and a licensing approach for Fluoride-Salt-Cooled High-Temperature Reactors (FHRs). The document does not contain details of particular reactor designs nor does it attempt to identify or classify either design basis or beyond design basis accidents. Further, this document is an initial attempt by a small set of subject matter experts to document the safety and licensing characteristics of FHRs for a larger audience. The document is intended to help in setting the safety and licensing research, development, and demonstration path forward. Input from a wider audience, further technical developments, and additional study will be required to develop a consensus position on the safety and licensing characteristics of FHRs. This document begins with a brief overview of the attributes of FHRs and then a general description of their anticipated safety performance. Following this, an overview of the US nuclear power plant approval process is provided that includes both test and power reactors, as well as the role of safety standards in the approval process. The document next describes a General Design Criteria (GDC) - based approach to licensing an FHR and provides an initial draft set of FHR GDCs. The document concludes with a description of a path forward toward developing an FHR safety standard that can support both a test and power reactor licensing process.

Flanagan, George F [ORNL; Holcomb, David Eugene [ORNL; Cetiner, Mustafa Sacit [ORNL

2012-06-01T23:59:59.000Z

346

Artificial Heart Valve Design  

E-Print Network (OSTI)

Artificial Heart Valve Design Your Chance to be a Biomedical Engineer #12;Circulatory System Video #12;What is a Heart Valve? · Heart Valve Video #12;#12;What Does a Heart Valve Do? · Maintain the one direction flow of blood through the heart · Heart valves allow blood to flow through in a forward direction

Provancher, William

347

Shock Tube Design  

E-Print Network (OSTI)

Shock accelerated flows exhibit some of the most violent and complex mechanisms in nature by which two separate fluids can be mixed. The Richtmyer-Meshkov instability (RMI) is generated when a perturbed interface between two fluids is impulsively accelerated by a shock wave. In order to further study the phenomenon of the RMI, a new shock tube will be designed. This shock tube will have the capability to change the angle of inclination, allowing for a diverse possibility of fluid interfaces, and provide two driver sections to allow for dual shock capability. The tube was designed to accommodate a 2.5 MACH shockwave, and incorporated a factor of safety of 3 in the design. A modular approach to design was followed to allow further diversification of the shock tube by changing the configuration of the modules. A circular driver section was used to maximize volume and a square driven section was used to minimize affects from the boundary layer. A slide rail mechanism was devised for changing the diaphragms which allows a single person to change the diaphragm in a timely manner. The entire tube is supported on an I-beam to maintain the rigidity of the system while inclined. To accommodate a variable inclination, a hybrid winch support system was designed. A winch changes the angle of the tube and a telescoping support system maintains the position during experimentation. It was determined after running COSMOS finite element stress analysis, that with the 2.5 MPa internal pressure associated with a 2.5 MACH shock wave, a 19.05 mm sidewall thickness was needed to provide a factor of safety of 3.

Koppenberger, Peter K.

2010-05-01T23:59:59.000Z

348

Designing with interactive example galleries  

Science Conference Proceedings (OSTI)

Designers often use examples for inspiration; examples offer contextualized instances of how form and content integrate. Can interactive example galleries bring this practice to everyday users doing design work, and does working with examples help the ... Keywords: design thinking, examples

Brian Lee; Savil Srivastava; Ranjitha Kumar; Ronen Brafman; Scott R. Klemmer

2010-04-01T23:59:59.000Z

349

Computer-Based Design Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Tools Reaching decisionmakers during the building design process Concerns about energy production's environmental effects, which gained their first wide public exposure...

350

Disappearing Cryptography: Information Hiding: Steganography & Watermarking, 3 edition  

Science Conference Proceedings (OSTI)

Cryptology is the practice of hiding digital information by means of various obfuscatory and steganographic techniques. The application of said techniques facilitates message confidentiality and sender/receiver identity authentication, and helps to ensure ... Keywords: Security

Peter Wayner

2008-12-01T23:59:59.000Z

351

Automated Phase Design and Timing Adjustment for Signal Phase Design  

Science Conference Proceedings (OSTI)

In this paper we describe the design processes of human traffic engineers and the development of an automated system that solves the problem of timing adjustment in signal phase sequence design. i>Signal phase sequencing refers to the sequence of ... Keywords: automated design, case-based reasoning, signal phase design, traffic management

L. Wang; C. C. Hayes; R. R. Penner

2001-06-01T23:59:59.000Z

352

Petroleum fuel facilities. design manual 22. Final design criteria  

SciTech Connect

Design criteria are presented for use by qualified engineers in designing liquid fueling and dispensing facilities. Included are basic requirements for the design of piping systems, pumps, heaters, and controls; the design of receiving, dispensing, and storage facilities; ballast treatment and sludge removal; corrosion and fire protection; and environmental requirements.

1982-08-01T23:59:59.000Z

353

DESIGN GUIDELINE SUMMARY  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Rev. 3 3 Rev. 3 August 2003 Rev. June 2004 Design Guideline Summary Based on the GEOVISION Report of Stanford Linear Accelerator Tunnel Vibration Measurements Parsons Pasadena, CA For Stanford Linear Accelerator Center Stanford University Stanford, CA Abstract: This summary report is provided in order to suggest how the measurement data from the GEOVision report might be used by SLAC for their proposed Next Linear Collider facility. See the referenced report "Stanford Linear Accelerator Tunnel Vibration Measurements, Conducted at MTA Universal Subway Station, North Hollywood, California", by GEOVision dated July 28, 2003. The following discussions are an attempt to determine an upper bound methodology that can be used for design purposes. The data in the

354

Prelminary Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Design Review Module Preliminary Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Prelim Rev Critical Decis CD-2 M ONMENTAL Review Plan inary De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) esign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

355

RANGE DESIGN CRITERIA  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RANGE DESIGN CRITERIA RANGE DESIGN CRITERIA U.S. DEPARTMENT OF ENERGY Office of Health, Safety and Security AVAILABLE ONLINE AT: INITIATED BY: http://www.hss.energy.gov Office of Health, Safety and Security Notices This document is intended for the exclusive use of elements of the Department of Energy (DOE), to include the National Nuclear Security Administration, their contractors, and other government agencies/individuals authorized to use DOE facilities. DOE disclaims any and all liability for personal injury or property damage due to use of this document in any context by any organization, group, or individual, other than during official government activities. Local DOE management is responsible for the proper execution of firearms-related programs for

356

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Email Portal (Zimbra)* Email Portal (Zimbra)* * Operations Logbook* * Project Proposal System* * ICMS * Safety and Training * ANL ESQ Training * APS Phone Directory * Resources & Information* * Internal link Design and Drafting Group The Advanced Photon Source (APS) at Argonne National Laboratory is a national synchrotron-radiation research facility funded by the U.S. Department of Energy. Using high-brilliance x-ray beams from the APS, an international community of scientists conducts forefront basic and applied research in the fields of material science, biological science, physics, chemistry, environmental, geophysical and planetary science. The AES Design and Drafting Group supports the ASD and AES divisions' continued improvement of the accelerator as well as the scientific

357

Conceptual Design RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conceptual Design Review Module Conceptual Design Review Module March 2010 CD-0 O 0 OFFICE OF C CD-1 F ENVIRO Standard R Concep Rev Critical Decis CD-2 M ONMENTAL Review Plan ptual De view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) sign e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

358

Insulated pipe clamp design  

SciTech Connect

Thin wall large diameter piping for breeder reactor plants can be subjected to significant thermal shocks during reactor scrams and other upset events. On the Fast Flux Test Facility, the addition of thick clamps directly on the piping was undesired because the differential metal temperatures between the pipe wall and the clamp could have significantly reduced the pipe thermal fatigue life cycle capabilities. Accordingly, an insulated pipe clamp design concept was developed. The design considerations and methods along with the development tests are presented. Special considerations to guard against adverse cracking of the insulation material, to maintain the clamp-pipe stiffness desired during a seismic event, to minimize clamp restraint on the pipe during normal pipe heatup, and to resist clamp rotation or spinning on the pipe are emphasized.

Anderson, M.J.; Hyde, L.L.; Wagner, S.E.; Severud, L.K.

1980-01-01T23:59:59.000Z

359

Designing Effective Algorithm Visualizations  

E-Print Network (OSTI)

Advances in computing technology and the aordability of software and high-performance graphics hardware enabled rapid growth of visual tools. Today, not only very expensive workstations, but also low-cost PCs are capable of running computationally demanding visualization systems. Algorithm visualizations or the graphic depiction of algorithms in execution have been used in explaining, designing and analyzing algorithms since the early 1980s. Although many tools have been developed over the past twenty years, not enough attention has been paid to the analysis of users, their needs, tasks, and goals. This paper provides an overview of algorithm visualization techniques, based on the premise that a rethinking of algorithm animation design is required in order to harness its power for enhancing learning. More information about the topic can be found on the author's web page. 1

Sami Khuri

2001-01-01T23:59:59.000Z

360

Central station photovoltaic array-field designs and design practices  

SciTech Connect

This report reviews and critiques the designs of large (1 MW or greater) photovoltaic power systems operating in a utility generating station mode. Four existing installations and eight paper design studies are reviewed. In addition, subsystem-specific studies on grounding and fault protection, lightning protection, array field electrical circuit design, bypass diodes, power conditioning, and utility interfaces were reviewed. Detailed tabular summaries of system design features and characteristics are presented. Based on a critique of the designs and discussions with designers, installers, and operators, recommendations of design practices for future installations are made.

Noel, G.T.; Smith, R.W.

1987-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Structured firewall design  

E-Print Network (OSTI)

Abstract. A firewall is a security guard placed at the point of entry between a private network and the outside Internet such that all incoming and outgoing packets have to pass through it. The function of a firewall is to examine every incoming or outgoing packet and decide whether to accept or discard it. This function is conventionally specified by a sequence of rules, where rules often conflict. To resolve conflicts, the decision for each packet is the decision of the first rule that the packet matches. The current practice of designing a firewall directly as a sequence of rules suffers from three types of major problems: (1) the consistency problem, which means that it is difficult to order the rules correctly; (2) the completeness problem, which means that it is difficult to ensure thorough consideration for all types of traffic; (3) the compactness problem, which means that it is difficult to keep the number of rules small (because some rules may be redundant and some rules may be combined into one rule). To achieve consistency, completeness, and compactness, we propose a new method called Structured Firewall Design, which consists of two steps. First, one designs a firewall using a Firewall Decision Diagram instead of a sequence of often conflicting rules. Second, a program converts the firewall decision diagram into a compact, yet functionally equivalent, sequence of rules. This method addresses the consistency problem because a firewall decision diagram is conflict-free. It addresses the completeness problem because the syntactic requirements of a firewall decision diagram force the designer to consider all types of traffic. It also addresses the compactness problem because in the second step we use two algorithms (namely FDD reduction and FDD marking) to combine rules together, and one algorithm (namely Firewall compaction) to remove redundant rules. Moreover, the techniques and algorithms presented in this paper are extensible to other rule-based systems such as IPsec rules.

Mohamed G. Gouda; Alex X. Liu

2007-01-01T23:59:59.000Z

362

ESF BLAST DESIGN ANALYSIS  

SciTech Connect

The purpose and objective of this design analysis are to develop controls considered necessary and sufficient to implement the requirements for the controlled drilling and blasting excavation of operations support alcoves and test support alcoves in the Exploratory Studies Facility (ESF). The conclusions reached in this analysis will flow down into a construction specification ensuring controlled drilling and blasting excavation will be performed within the bounds established here.

E.F. fitch

1995-03-13T23:59:59.000Z

363

Residential Duct Design Guide  

Science Conference Proceedings (OSTI)

To provide comfortable levels of heating or cooling, a space-conditioning system must be properly sized and carefully installed. Movement of air and passages through which air is moved are vitally important for comfort. An inadequate system can cause uncomfortable drafts, may fail to move sufficient air to meet space heating and cooling loads, or may result in excessive energy costs. The best way to avoid problems is to prevent them in the design stage. This guide gives HVAC specialists basic information...

2000-11-02T23:59:59.000Z

364

Slurry reactor design studies  

SciTech Connect

The objective of these studies was to perform a realistic evaluation of the relative costs of tublar-fixed-bed and slurry reactors for methanol, mixed alcohols and Fischer-Tropsch syntheses under conditions where they would realistically be expected to operate. The slurry Fischer-Tropsch reactor was, therefore, operated at low H{sub 2}/CO ratio on gas directly from a Shell gasifier. The fixed-bed reactor was operated on 2.0 H{sub 2}/CO ratio gas after adjustment by shift and CO{sub 2} removal. Every attempt was made to give each reactor the benefit of its optimum design condition and correlations were developed to extend the models beyond the range of the experimental pilot plant data. For the methanol design, comparisons were made for a recycle plant with high methanol yield, this being the standard design condition. It is recognized that this is not necessarily the optimum application for the slurry reactor, which is being proposed for a once-through operation, coproducing methanol and power. Consideration is also given to the applicability of the slurry reactor to mixed alcohols, based on conditions provided by Lurgi for an Octamix{trademark} plant using their standard tubular-fixed reactor technology. 7 figs., 26 tabs.

Fox, J.M.; Degen, B.D.; Cady, G.; Deslate, F.D.; Summers, R.L. (Bechtel Group, Inc., San Francisco, CA (USA)); Akgerman, A. (Texas A and M Univ., College Station, TX (USA)); Smith, J.M. (California Univ., Davis, CA (USA))

1990-06-01T23:59:59.000Z

365

GEM Technical Design Report  

SciTech Connect

The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

1993-07-31T23:59:59.000Z

366

Photovoltaic Incentive Design Handbook  

DOE Green Energy (OSTI)

Investments in customer-owned grid-connected photovoltaic (PV) energy systems are growing at a steady pace. This is due, in part, to the availability of attractive economic incentives offered by public state agencies and utilities. In the United States, these incentives have largely been upfront lump payments tied to the system capacity rating. While capacity-based ''buydowns'' have stimulated the domestic PV market, they have been criticized for subsidizing systems with potentially poor energy performance. As a result, the industry has been forced to consider alternative incentive structures, particularly ones that pay based on long-term measured performance. The industry, however, lacks consensus in the debate over the tradeoffs between upfront incentive payments versus longer-term payments for energy delivery. This handbook is designed for agencies and utilities that offer or intend to offer incentive programs for customer-owned PV systems. Its purpose is to help select, design, and implement incentive programs that best meet programmatic goals. The handbook begins with a discussion of the various available incentive structures and then provides qualitative and quantitative tools necessary to design the most appropriate incentive structure. It concludes with program administration considerations.

Hoff, T. E.

2006-12-01T23:59:59.000Z

367

This fact sheet describes the repository design activities the U.S. Department o  

Office of Legacy Management (LM)

repository design activities the U.S. Department of Energy is conducting at the Monticello repository design activities the U.S. Department of Energy is conducting at the Monticello Mill Tailings Site in Monticello, Utah. These activities are being performed in accordance with Federal and State environ- mental laws. Background The purpose of the Monticello cleanup projects is to minimize the risks to the public and the environment from exposure to mill tailings and the radon gas they produce. The Monticello Mill Tailings Site cleanup remedy was se- lected in the Record of Decision in August 1990 and recon- firmed in December 1994. It includes permanent disposal of mill tailings and contaminated materials in a repository to be constructed on U.S. Department of Energy (DOE)- owned land south of the millsite in Monticello, Utah. The repository will hold approximately 2.6 to 3.0 million cubic

368

DESIGN OF MTR FUEL-ELEMENT-SOURCE SHIPPING CASK FOR RAILWAY MOBILE IRRADIATION FACILITY. Progress Report  

SciTech Connect

The gamma -radiation field from a battery of 10 MTR spent fuel elements was calculated and a special shipping cask designed to contain the 10 elements. An internal watercooled tank in the cask holds the 10 elements in the vertical position. Two external air-cooled, finned-tube heat exchangers control the water temperature. The sides of the cask open to convert the cask to a radiation source without changing the position of the elements. A unique feature of the design is a device for closing the sides of the cask by gravity in the event of accident or power failure. This provides a ''fail-safe'' safety feature. (auth)

Brownell, L.E.; Patterson, J.; Purohit, S.N.

1957-09-01T23:59:59.000Z

369

The poetics of design fiction  

Science Conference Proceedings (OSTI)

Design fiction is an emergent field within HCI and interaction design the understanding of which ultimately relies, so we argue, of an integrative account of poetics and design praxis. In this paper we give such an account. Initially, a precise definition ... Keywords: design fiction, poetics, utopianism

Thomas Markussen, Eva Knutz

2013-09-01T23:59:59.000Z

370

Design of an EPR blanket  

SciTech Connect

A blanket concept is presented which meets typical requirements anticipated for an Experimental Power Reactor. Design alternatives are reviewed. One-dimensional neutronic and thermal hydraulic results are presented for the ORNL reference design. Design consideration was given for remote maintenance and assembly requirements. Modifications of the reference design first wall are necessary because of high thermal stresses. (auth)

Bettis, E.S.; Huxford, T.J.; McAlees, D.G.; Santoro, R.T.; Watts, H.L.; Williams, M.L.

1975-01-01T23:59:59.000Z

371

Programmed design of ship forms  

Science Conference Proceedings (OSTI)

This paper describes a new category of CAD applications devoted to the definition and parameterization of hull forms, called programmed design. Programmed design relies on two prerequisites. The first one is a product model with a variety of types large ... Keywords: CAD language, Hull form, Parametric design, Product model, Programmed design

A. Rodrguez; L. Fernndez-Jambrina

2012-07-01T23:59:59.000Z

372

Good, Better, Best: Designing a Designation Program for Solar | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar Good, Better, Best: Designing a Designation Program for Solar December 4, 2012 - 4:00pm Addthis The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. The Energy Department is gathering input on solar designation programs that could one day help consumers recognize the best products and services that the solar industry has to offer. | Photo by Dennis Schroeder/NREL. Minh Le Minh Le Program Manager, Solar Program How can I participate? To provide input for the Designation Program for Solar Energy Stakeholders Request for Information (RFI), submit your feedback.

373

Interactive fracture design model  

DOE Green Energy (OSTI)

A computer program is described that can be used to design a fracture stimulation treatment for a geothermal reservoir. The program uses state-of-the-art methods to calculate the temperature of the fracture fluid as a function of time and distance in the fracture. This information is used to determine the temperature dependent properties of the fracture fluid. These fluid properties are utilized to calculate the fracture geometry as a function of time. The fracture geometry and temperature distribution of the fracture fluid are coupled so the subroutines that calculate these distributions have been made interactive.

Not Available

1980-05-01T23:59:59.000Z

374

Network design and defence  

E-Print Network (OSTI)

Goyal (2007), Jackson (2008) and Vega-Redondo (2007).3 A key issue is the robustness of networks to different types of shocks natural and man made. This subject is relatively little studied. The contribution of our paper is to build on a classical... by the Designer must be connected. Observe that connectedness of the residual network can be guaranteed by a star network with 1 unit of defence assigned to the centre. This protected network has minimal number of links across all connected net- works and minimal...

Dziubi?ski, Marcin; Goyal, Sanjeev

2013-01-10T23:59:59.000Z

375

6 Nuclear Fuel Designs  

NLE Websites -- All DOE Office Websites (Extended Search)

Message from the Director Message from the Director 2 Nuclear Power & Researrh Reactors 3 Discovery of Promethium 4 Nuclear Isotopes 4 Nuclear Medicine 5 Nuclear Fuel Processes & Software 6 Nuclear Fuel Designs 6 Nuclear Safety 7 Nuclear Desalination 7 Nuclear Nonproliferation 8 Neutron Scattering 9 Semiconductors & Superconductors 10 lon-Implanted Joints 10 Environmental Impact Analyses 11 Environmental Quality 12 Space Exploration 12 Graphite & Carbon Products 13 Advanced Materials: Alloys 14 Advanced Materials: Ceramics 15 Biological Systems 16 Biological Systems 17 Computational Biology 18 Biomedical Technologies 19 Intelligent Machines 20 Health Physics & Radiation Dosimetry 21 Radiation Shielding 21 Information Centers 22 Energy Efficiency: Cooling & Heating

376

QA in Design Guidance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 U.S. DEPARTMENT OF ENERGY OFFICE OF ENVIRONMENTAL MANAGEMENT Guidance Document for Integrating Quality Assurance During the Design and Construction Life Cycle September 2011 Page 2 of 29 FOREWORD This Department of Energy (DOE) Environmental Management (EM) guidance document is approved for use by all DOE EM organizational units and contractors performing work for EM. A project's Quality Assurance Program assigns responsibilities and authorities, defines policies and requirements, and provides for the performance and assessment of work that provides confidence that required level of quality is achieved, commensurate with the various project requirements. This guidance document offers for evaluation, by project personnel from EM and contractor

377

Variables Influencing HRSG Designs  

E-Print Network (OSTI)

Heat Recovery Steam Generators (HRSG's) are widely used in chemical plants, refineries, incineration and cogeneration systems and in general for recovering energy from waste gas streams. In applications such as hydrogen or sulfuric acid plants, the duty and exit gas temperature from the HRSG are set by process considerations while the energy recovery potential in other applications is impacted by considerations of efficiency. In addition, low or high temperature corrosion, space availability, duty, size and maintenance aspects play a vital role in the design and sizing of HRSG's. This paper will address a few of the above considerations.

Ganapathy, V.; Rentz, J.

1990-06-01T23:59:59.000Z

378

Control system design method  

Science Conference Proceedings (OSTI)

A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

Wilson, David G. (Tijeras, NM); Robinett, III, Rush D. (Tijeras, NM)

2012-02-21T23:59:59.000Z

379

MCFC PRODUCT DESIGN IMPROVEMENT  

SciTech Connect

This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) to provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (B) To construct a full-size MW-class dual fuel power plant simulator.

Unknown

2000-01-01T23:59:59.000Z

380

Design and Operation of Membrane Microcalorimeters for Thermal Screening of Highly Energetic Materials  

E-Print Network (OSTI)

Following several terrorist attacks that have occurred during this decade, there is an urgent need to develop new technologies for the detection of highly energetic materials that can represent an explosive hazard. In an effort to contribute to the development of these new technologies, this work presents the design aspects of a chip-scale calorimeter that can be used to detect an explosive material by calorimetric methods. The aim of this work is to apply what has been done in the area of chip-scale calorimetry to the screening of highly energetic materials. The prototypes presented here were designed using computer assisted design and finite element analysis tools. The design parameters were set to satisfy the requirements of a sensor that can be integrated into a portable system (handheld) for field applications. The design approach consisted of developing a sensor with thick silicon membranes that can hold micro-size samples and that can operate at high temperatures, while keeping the cost of the sensor low. Contrary to other high resolution systems based on thin-film membranes, our prototypes exhibit a contribution from addenda that is comparable to that from the sample, and hence they have lower sensitivity. However, using thick membranes offers the advantage of producing sensors strong enough for this application and that have significantly lower cost. Once the prototypes were designed, the fabrication was performed using standard microfabrication techniques. Finally, the operation of our prototypes was demonstrated by conducting thermal analysis of different liquid and solid samples.

Carreto Vazquez, Victor 1976-

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Sharing tacit design knowledge in a distributed design environment  

E-Print Network (OSTI)

Throughout the life-cycle of a design project, architects rely heavily on their tacit design knowledge to support design decisions. Tacit knowledge is highly personal and implicit. As such, it encompasses expertise, intuitive understanding, and professional insight formed as a result of experience. Due to its implicit nature, tacit design knowledge is typically shared only among colleagues who work in the same office through face-toface interactions. With emerging Computer-Mediated Communication (CMC) technologies, designers face new opportunities for capturing and reusing tacit design knowledge. However, there is no accepted CMC strategy for sharing tacit design knowledge in the Architecture, Engineering, and Construction (AEC) industry. This research investigates the impact of tacit design knowledge on design performance in a distributed design environment supported by CMC software. The software was developed and tested in three design studios in which design students sought advice from experts in remote locations. It provides tools for showing images, such as drawings and renderings, and for engaging in a written dialogue (chat session). The written and graphic artifacts of the conversation are stored in a Web-accessible database. The chat sessions included the identification, clarification, and explanation of real problems. Dialogue records provide evidence of a significant influence upon the studentsâ?? approach to conceptual design. Content analysis of the comments from the experts provides qualitative evidence for the softwareâ??s effectiveness. The participants shared past experience, professional recommendations, and intuitive expectations. In follow-up surveys, most participants reported that their experience with the software was very enjoyable and the software is well-designed to support sharing of design knowledge. This research also suggests that tacit design knowledge may be confidently captured and shared through careful strategic implementation of CMC technology in a distributed design environment. Demographic and attitudinal surveys of the participants suggest that enabling factors for sharing tacit design knowledge include knowledge sharing attitude, just-in-time expertise matching, and timing of the communication.

Woo, Jeong-Han

2005-08-01T23:59:59.000Z

382

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

Design & Drafting Work Request Form Design & Drafting Work Request Form Please complete and submit the following form to request service from the AES/D&D Group Please fill out this form as complete as possible. Please do not use any special characters such as / or \ use a dash -. Project Name: Project Division is for: AES ASD XSD BEAMLINE APS APS-Upgrade LCLS NSLS-II Specify the APS Division the Project will be built for. WBS: Requesting Engineer: Last Name First Name Requesters Badge Number: Requesters Phone: E-mail: @aps.anl.gov Requesters Group: AES-ADM AES-BC AES-BSC AES-CF AES-CS AES-CTL AES-DD AES-IS AES-IT AES-MED AES-MIS AES-MOM AES-PRO AES-SA AES-SI AES-UES ASD-ADM ASD-AP ASD-DIA ASD-IAG ASD-MD ASD-OA ASD-PS ASD-RF LCLS USR-APS XSD-ADM XSD-BTS XSD-CEP XSD-IXN XSD-MC XSD-MM XSD-OFM XSD-TRR XSD-UAS XSD-XMI XSD-XOR

383

Market Design Test Environments  

SciTech Connect

Power industry restructuring continues to evolve at multiple levels of system operations. At the bulk electricity level, several organizations charged with regional system operation are implementing versions of a Wholesale Power Market Platform (WPMP) in response to U.S. Federal Energy Regulatory Commission initiatives. Recently the Energy Policy Act of 2005 and several regional initiatives have been pressing the integration of demand response as a resource for system operations. These policy and regulatory pressures are driving the exploration of new market designs at the wholesale and retail levels. The complex interplay among structural conditions, market protocols, and learning behaviors in relation to short-term and longer-term market performance demand a flexible computational environment where designs can be tested and sensitivities to power system and market rule changes can be explored. This paper presents the use of agent-based computational methods in the study of electricity markets at the wholesale and retail levels, and distinctions in problem formulation between these levels.

Widergren, Steven E.; Sun, Junjie; Tesfatsion, Leigh

2006-06-18T23:59:59.000Z

384

CONCEPTUAL DESIGN REPORT  

Science Conference Proceedings (OSTI)

Brookhaven National Laboratory has prepared a conceptual design for a world class user facility for scientific research using synchrotron radiation. This facility, called the ''National Synchrotron Light Source II'' (NSLS-II), will provide ultra high brightness and flux and exceptional beam stability. It will also provide advanced insertion devices, optics, detectors, and robotics, and a suite of scientific instruments designed to maximize the scientific output of the facility. Together these will enable the study of material properties and functions with a spatial resolution of {approx}1 nm, an energy resolution of {approx}0.1 meV, and the ultra high sensitivity required to perform spectroscopy on a single atom. The overall objective of the NSLS-II project is to deliver a research facility to advance fundamental science and have the capability to characterize and understand physical properties at the nanoscale, the processes by which nanomaterials can be manipulated and assembled into more complex hierarchical structures, and the new phenomena resulting from such assemblages. It will also be a user facility made available to researchers engaged in a broad spectrum of disciplines from universities, industries, and other laboratories.

ROBINSON,K.

2006-12-31T23:59:59.000Z

385

Informing design decisions : an approach to corporate building design  

E-Print Network (OSTI)

This thesis is an investigation into design methodologies. How do we, as designers, prepare ourselves for decision making and evaluate our assumptions and decisions? The intent is to employ this information as a basis for ...

Maxwell, Marc A

1985-01-01T23:59:59.000Z

386

Teaching Design for Environment in Product Design Classes  

E-Print Network (OSTI)

The paper presents an approach to teaching design for environment (DFE) in the context of a product design and development course. The teaching method has been applied in our classes for graduate engineering, business, and ...

Baeriswyl, Michael C.

387

Probing the black box : experiments in design and design education  

E-Print Network (OSTI)

Conventional analysis and design methods based on preexisting methods and assumptions preconditions and limits the designer's level of engagement with the specific context that is under investigation. A structural analysis ...

Mulvey, Christopher P. (Christopher Paul), 1975-

2000-01-01T23:59:59.000Z

388

ATW neutronics design studies.  

SciTech Connect

The Accelerator Transmutation of Waste (ATW) concept has been proposed as a transuranics (TRU) (and long-lived fission product) incinerator for processing the 87,000 metric tonnes of Light Water Reactor used fuel which will have been generated by the time the currently deployed fleet of commercial reactors in the US reach the end of their licensed lifetime. The ATW is proposed to separate the uranium from the transuranics and fission products in the LWR used fuel, to fission the transuranics, to send the LWR and ATW generated fission products to the geologic repository and to send the uranium to either a low level waste disposal site or to save it for future use. The heat liberated in fissioning the transuranics would be converted to electricity and sold to partially offset the cost of ATW construction and operations. Options for incineration of long-lived fission products are under evaluation. A six-year science-based program of ATW trade and system studies was initiated in the US FY 2000 to achieve two main purposes: (1) ''to evaluate ATW within the framework of nonproliferation, waste management, and economic considerations,'' and (2) ''to evaluate the efficacy of the numerous technical options for ATW system configuration.'' This paper summarizes the results from neutronics and thermal/hydraulics trade studies which were completed at Argonne National Laboratory during the first year of the program. Core designs were developed for Pb-Bi cooled and Na cooled 840 MW{sub th} fast spectrum transmuter designs employing recycle. Additionally, neutronics analyses were performed at Argonne for a He cooled 600 MW{sub th} hybrid thermal and fast core design proposed by General Atomics Co. which runs critical for 3/4 and subcritical for 1/4 of its four year once-thin burn cycle. The mass flows and the ultimate loss of transuranic isotopes to the waste stream per unit of heat generated during transmutation have been calculated on a consistent basis and are compared. (Long-lived fission product incineration has not been considered in the studies reported here.)

Wade, D. C.; Yang, W. S.; Khalil, H.

2000-11-10T23:59:59.000Z

389

Experimental designs optimally balanced for trend  

Science Conference Proceedings (OSTI)

Keywords: BLKL exchange algorithm, BT algorithm, adjustment algorithm, design efficiency, optimum design, response surface, trend-free design

A. C. Atkinson; A. N. Donev

1996-11-01T23:59:59.000Z

390

Design and Drafting  

NLE Websites -- All DOE Office Websites (Extended Search)

AES / D&D Group Online AES / D&D Group Online Request for Information (RFI) Please complete and submit the following form. Please fill out this form as complete as possible. Project Name: Requested Response Date Requesting Designer: Any Available Alley. Reginald Andrist. John Bartkowiak. Neil Brown. Lloyd Davis. Brenda Downey. Josh Fallin. David Givens. Michelle Gunkelman. Patricia Grabinski. Tom Hibbard. Robert Jensen. Don Kalt. Robert Kirkus. Ed Lerch. Jason Mulvey. James O'Neill. Maria Pilar Panchal. Prakash Pasholk. Dan Poindexter. Nate Rocke. Benjamin Skiadopoulos. Denise Thompson. Kimberly Turner. Bill Walker. Karen Jo Respondent Engineer: Last Name First Name Requestors Phone: Importance Level: Time Holder Low Normal High URGENT Requestors E-mail: @aps.anl.gov Estimated Hours of Impact:

391

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Extraction Utility Design Specification May 13, 2013 Document Version 1.10 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version

392

Progress in ELENA Design  

E-Print Network (OSTI)

The Extra Low Energy Antiproton ring (ELENA) is a small ring at CERN which will be built to increase substantially the number of usable (or trappable) antiprotons delivered to experiments for studies with antihydrogen and antiprotonic nuclei. The report shows the progress in the ELENA design. The choice of optics and ring layout inside the AD hall is given. The main limitations for beam parameters at extraction like intra beam scattering and tune shift due to space charge are discussed. The electron cooler plays a key role in ELENA both for efficient deceleration as well as for preparing extracted beam with parameters defined by the experiments. The other important systems like beam vacuum, beam instrumentations and others are reviewed as well.

Bartmann, W; Breuker, H; Butin, F; Carli, C; Eriksson, T; Kersevan, R; Maury, S; Pasinelli, S; Tranquille, G; Vanbavinckhove, G; Oelert, W

2013-01-01T23:59:59.000Z

393

Cogeneration System Design Options  

E-Print Network (OSTI)

The commercial or industrial firm contemplating cogeneration at its facilities faces numerous basic design choices. The possibilities exist for fueling the system with waste materials, gas, oil, coal, or other combustibles. The choice of boiler, engine, turbine, generator, switchgear, and balance of plant can be bewildering. This paper presents an overview and a systematic approach to the basic system alternatives and attributes. The presentation illustrates how these options match the electrical and thermal needs of a firm, and what kind of operating economics and system paybacks have been achieved. Several cogeneration options are also illustrated to eliminate the problems and uncertainties of dealing with uninterested or non-cooperative utilities, as well as to minimize system costs.

Gilbert, J. S.

1985-05-01T23:59:59.000Z

394

Seal design alternatives study  

SciTech Connect

This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information.

Van Sambeek, L.L. [RE/SPEC Inc., Rapid City, SD (US); Luo, D.D.; Lin, M.S.; Ostrowski, W.; Oyenuga, D. [Parsons Brinckerhoff Quade & Douglas, Inc., San Francisco, CA (US)

1993-06-01T23:59:59.000Z

395

Participatory design in emergency medical service: designing for future practice  

Science Conference Proceedings (OSTI)

We describe our research-its approach, results and products-on Danish emergency medical service (EMS) field or "pre-hospital" work in minor and major incidents. We discuss how commitments to participatory design and attention to the qualitative differences ... Keywords: Future Lab, emergency response, major incidents, medical response, minor incidents, participatory design, technology design, victim as boundary object, wireless biomonitor

Margit Kristensen; Morten Kyng; Leysia Palen

2006-04-01T23:59:59.000Z

396

Design and verification of high-speed VLSI physical design  

Science Conference Proceedings (OSTI)

With the rapid development of deep submicron (DSM) VLSI circuit designs, many issues such as time closure and power consumption are making the physical designs more and more challenging. In this review paper we provide readers with some recent progress ... Keywords: VLSI, buffer insertion, clock distribution, delay, floorplanning and placement, interconnect, order reduction, parameter extraction, physical design, power, power grid, wire sizing

Dian Zhou; Rui-Ming Li

2005-03-01T23:59:59.000Z

397

MCFC product design improvement  

Science Conference Proceedings (OSTI)

This contract is supported by DOE and DOD/DARPA funds. The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOE's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (A) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed; and (B) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to the year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications. A dual fuel fixed base design for military fuels operation, as well as support system logistics will be the key deliverables for the DARPA part of the program.

Unknown

1999-05-01T23:59:59.000Z

398

Contemporary Strategies for Sustainable Design  

E-Print Network (OSTI)

This exploratory research examined the degree of adoption and impact of the concepts of Building Information Model (BIM), Integrated Project Delivery (IPD), Integrated Design Process (IDP) and Building Energy Simulation (BES) on the design processes of advanced architectural firms when executing sustainable design. Six offices identified by the press for a strong commitment to sustainable design and influence in the design of high performance buildings were selected as cases. In semi-standardized interviews, these firms presented their perceptions of the influence of BIM, BES, and IPD/IDP. The results show that a generalization of sustainable design processes is possible. A design process for sustainability (DEPROSU) model was created by collecting best practices from data gathered from the interviews and the critical literature review. Secondary contributions show that BIM, IDP/IPD and BES have a synergistic effect in sustainable design methods, and that the human resource profile from these firms has evolved towards multi-skilled professionals knowledgeable in BES, BIM, parametric design, sustainability and construction processes. This research provides evidence of commonalities found in the design processes of the selected firms. These commonalities, which have been represented in the DEPROSU model, can potentially be validated as protocols or standards for sustainable design, providing architectural design practices with concrete patterns for improvement and or validation of their design methods.

Farias, Francisco

2013-05-01T23:59:59.000Z

399

page 1 of 13 The Information Services Supermarket a trial TINAC Design  

E-Print Network (OSTI)

) ComponentCounter Binds to a clock if required and holds current tarrifing algorithms ComponentBlock Blocks

Marshall, Ian W.

400

Designing technology enhanced learning contexts  

Science Conference Proceedings (OSTI)

Through iterative participatory design-based research I aim to explore the application of the Ecology of Resources (EoR) Framework (Luckin, 2008) to the design of technology enhanced contexts that scaffold learning and collaboration. Technology enhanced ...

Joshua Underwood

2009-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Magical experiences in interaction design  

Science Conference Proceedings (OSTI)

This paper is a description of design experiments performed to investigate the use of magical experiences in interaction design of consumer electronics. Magical experiences are usually associated with a passive audience watching a magician, but it is ...

Sam de Jongh Hepworth

2007-08-01T23:59:59.000Z

402

Environmental Design Space model assessment  

E-Print Network (OSTI)

The Environmental Design Space (EDS) is a multi-disciplinary design tool used to explore trade-offs among aircraft fuel burn, emissions, and noise. This thesis uses multiple metrics to assess an EDS model of a Boeing 777 ...

Spindler, Phillip Michael

2007-01-01T23:59:59.000Z

403

Design of mechanical arterial simulator  

E-Print Network (OSTI)

A force controlled ultrasound probe is being explored as a new method of measuring blood pressure. An arterial simulator was designed and built for experiments. For this simulator, the vessels and bulk material were designed ...

Chai, Lauren (Lauren Amy)

2012-01-01T23:59:59.000Z

404

Professional Ethics, System Design Methods  

E-Print Network (OSTI)

: today's approaches Ethics-related issue #12;Analysis Design Development Implementation (+ training analysis system Metadata management Context-sensitive warnings Methods to select best sources Spatial CAREFUL knowledge about risk traditional knowledge about risk #12;Analysis Design Development

Wright, Dawn Jeannine

405

Research experiments detailed design review  

DOE Green Energy (OSTI)

The illustrations for the detailed design review of the heliostats for a solar thermal pilot plant are presented. Also included are the program schedule, meeting agenda, and component design features. (MHR)

Not Available

1976-01-01T23:59:59.000Z

406

Design review report for the hydrogen interlock preliminary design  

DOE Green Energy (OSTI)

This report documents the completion of a preliminary design review for the hydrogen interlock. The hydrogen interlock, a proposed addition to the Rotary Mode Core Sampling (RMCS) system portable exhauster, is intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to validate basic design assumptions and concepts to support a path forward leading to a final design. The conclusion reached by the review committee was that the design was acceptable and efforts should continue toward a final design review.

Corbett, J.E.

1996-01-01T23:59:59.000Z

407

Position paper: Seismic design criteria  

SciTech Connect

The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A.

Farnworth, S.K.

1995-05-22T23:59:59.000Z

408

FDH radiological design review guidelines  

SciTech Connect

These guidelines discuss in more detail the radiological design review process used by the Project Hanford Management Contractors as described in HNF-PRO-1622, Radiological Design Review Process. They are intended to supplement the procedure by providing background information on the design review process and providing a ready source of information to design reviewers. The guidelines are not intended to contain all the information in the procedure, but at points, in order to maintain continuity, they contain some of the same information.

Millsap, W.J.

1998-09-29T23:59:59.000Z

409

Transmission Structure Foundation Design Guide  

Science Conference Proceedings (OSTI)

This guide contains the most current and comprehensive information for the design of foundations for overhead line structures. The guide covers the complete transmission structure foundation design process from the subsurface investigations and design of the foundations, to the construction and inspection of the foundation. Reference documents to assist transmission structure foundation designers in the development of specifications such as for subsurface investigations and foundation construction ...

2012-11-28T23:59:59.000Z

410

Energy manager design for microgrids  

E-Print Network (OSTI)

refrigeration, space heating, water heating, and loads that can only be met by combustible Energy Manager Design

Firestone, Ryan; Marnay, Chris

2005-01-01T23:59:59.000Z

411

High Speed ADC Design Methodology  

E-Print Network (OSTI)

545. [11] Siqiang Fan, High Speed ADC Design Techniques,Fan, Xin Wang, Lin Lin, Qiang Fang, Jian Liu and Albert Wang, DesignFan, Xin Wang, Lin Lin, Qiang Fang, Jian Liu, Bin Zhao and Albert Wang, Capacitive Interpolated Flash ADC Design

Tang, He

2010-01-01T23:59:59.000Z

412

Emerging markets: design goes global  

Science Conference Proceedings (OSTI)

China and India represent two of the most rapidly evolving markets for IC design today. According to the CMP China IC Design Survey 2002, demand for IC design services in China is growing exponentially alongside 8- and 12-inch wafer fab construction. ...

Chi-Foon Chan; Deirdre Hanford; Jian Yue Pan; Narendra Shenoy; Mahesh Mehendale; A. Vasudevan; Shaojun Wei

2003-06-01T23:59:59.000Z

413

Spherical Torus Center Stack Design  

SciTech Connect

The low aspect ratio spherical torus (ST) configuration requires that the center stack design be optimized within a limited available space, using materials within their established allowables. This paper presents center stack design methods developed by the National Spherical Torus Experiment (NSTX) Project Team during the initial design of NSTX, and more recently for studies of a possible next-step ST (NSST) device.

C. Neumeyer; P. Heitzenroeder; C. Kessel; M. Ono; M. Peng; J. Schmidt; R. Woolley; I. Zatz

2002-01-18T23:59:59.000Z

414

Integrated Transportation System Design Optimization  

E-Print Network (OSTI)

Integrated Transportation System Design Optimization by Christine Taylor B.S. Cornell University by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Professor Jaime Peraire Chairman, Department Graduate Committee #12;2 #12;Integrated Transportation System Abstract Traditionally, the design of a transportation system has focused on either the vehicle design

415

Metrics And The Software Designer  

E-Print Network (OSTI)

This paper will focus on these key topics in an effort to propose a means by which software designers can become effective contributors in the process of metrics collection analysis and reporting. METRICS AND THE SOFTWARE DESIGNER 4 2. KEY TOPICS FOR METRICS USAGE BY DESIGNERS

John T. Kalisz

1996-01-01T23:59:59.000Z

416

Modeling and design of a reload PWR core for a 48-month fuel cycle  

Science Conference Proceedings (OSTI)

The objective of this research was to use state-of-the-art nuclear and fuel performance packages to evaluate the feasibility and costs of a 48 calendar month core in existing pressurized water reactor (PWR) designs, considering the full range of practical design and economic considerations. The driving force behind this research is the desire to make nuclear power more economically competitive with fossil fuel options by expanding the scope for achievement of higher capacity factors. Using CASMO/SIMULATE, a core design with fuel enriched to 7{sup w}/{sub o} U{sup 235} for a single batch loaded, 48-month fuel cycle has been developed. This core achieves an ultra-long cycle length without exceeding current fuel burnup limits. The design uses two different types of burnable poisons. Gadolinium in the form of gadolinium oxide (Gd{sub 2}O{sub 3}) mixed with the UO{sub 2} of selected pins is sued to hold down initial reactivity and to control flux peaking throughout the life of the core. A zirconium di-boride (ZrB{sub 2}) integral fuel burnable absorber (IFBA) coating on the Gd{sub 2}O{sub 3}-UO{sub 2} fuel pellets is added to reduce the critical soluble boron concentration in the reactor coolant to within acceptable limits. Fuel performance issues of concern to this design are also outlined and areas which will require further research are highlighted.

McMahon, M.V.; Driscoll, M.J.; Todreas, N.E. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

1997-05-01T23:59:59.000Z

417

Extraction Utility Design Specification  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Extraction Utility Extraction Utility Design Specification January 11, 2011 Document Version 1.9 1 Revision History Date Version Section and Titles Author Summary of Change January 15, 2010 1.0 All Eric Morgan, Dekker, Ltd. Initial Draft Document January 19, 2010 1.1 All Igor Pedan, Dekker, Ltd. Document update with EM team review notes January 20, 2010 1.2 2.1.1 EM Project Team Document Review January 27, 2010 1.3 All Bruce Bartells Final Draft Review May 10, 2010 1.4.1 2.8 Igor Pedan, Dekker, Ltd. Section Update May 14, 2010 1.4.2 2.3.1 Igor Pedan, Dekker, Ltd. System Tables Added May 17, 2010 1.4.3 2.3 Igor Pedan, Dekker, Ltd. Enhancements Update June 29, 2010 1.5 All Igor Pedan, Dekker, Ltd. Revised for Version 8.0.20100628 July 14, 2010 1.5.1 2.8 Igor Pedan,

418

Designing superior incentive regulation  

SciTech Connect

The key to success in designing effective incentive regulation is relatively simple: Anticipate all of the incentives that will ultimately come to bear, and structure regulatory policy in advance to limit any adverse incentives. All is a critical word here. Attention commonly is focused on the incentives a proposed regulatory plan creates for the regulated firm to minimize production costs, diversify into new markets, and so on. While the incentives are important in assessing a regulatory plan, they are only one consideration. It is also critical to analyze the incentives the plan creates for other key players in the regulatory arena, particularly regulators. It is premature to draw any broad conclusions about the success of incentive regulation in the electric power and natural gas industries. While there is reason for optimism, concern remain. Some incentive regulation plans have been abandoned, in part because of: (1) unforeseen exogenous event that could not be administered within the confines of the plan; (2) public opposition to rewarding a utility for the superior performance it should have realized without the promise of financial reward; (3) adverse reaction to utility earnings in excess of those commonly authorized under traditional regulation, and (4) questions about the legality of the plans under state statutes.

Sappington, D.E.M.; Weisman, D.L.

1994-02-15T23:59:59.000Z

419

MCFC PRODUCT DESIGN IMPROVEMENT  

SciTech Connect

The objective of the DOE program is to advance the direct carbonate fuel cell technology to a level suitable for commercial entry. The specific objectives of the DOD's initiative on 2 MW Fuel Cell Fixed Base Power Plant are: (1) To provide a detailed engineering design, development and cost estimate of the 2 MW fuel cell fixed base dual fuel power plant for DOD applications. Installation and operational support systems will also be developed. (2) To construct a full-size MW-class dual fuel power plant simulator. These objectives are planned to be achieved in the program coordinated with the Department of Energy, which has been funding a multiyear natural gas fueled direct fuel cell power plant program (DE-FC21-95MC31184) for civilian applications. Because many DARPA and DOE objectives are similar, the coordinated program activities are considered the most cost-effective for accomplishment of the program objectives. The DARPA/DOE joint program was launched in 1994. The DOE part of the program is expected to continue to Year 2000. The final output of this DOE program is to construct and operate a 2 MW power plant on an East Coast site. The site will be accessible to DOD energy/environmental systems base planners and logistics personnel as well as mission and policy planners to refine deployment configurations of this new power generation system for fixed base applications.

Unknown

2000-04-30T23:59:59.000Z

420

Pepco Holdings, Inc; August 26, 2005  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2005 26, 2005 The Honorable Samuel W. Bodman Secretary U. S. Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Dear Secretary Bodman: I am writing to alert you to our concerns regarding the reliability of electricity service for the Nation's Capital in light of the recent shutdown of the Potomac River Generating Station in Alexandria, Virginia. The plant shutdown has removed a redundancy which is critical to assuring the reliable supply of electricity. Accordingly, we believe that immediate resumption of plant operations, in a manner that balances environmental and electricity reliability concerns, is critical to ensuring reliable electric service to the Nation's Capital. The Potomac River plant has five generating units connected to the local

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Land Validation Holdings, PROVE, June 2001  

NLE Websites -- All DOE Office Websites (Extended Search)

PROVE Data and Images Released PROVE Data and Images Released Data and images are now available from the Prototype Validation Exercise (PROVE), a field campaign conducted in May 1997 at the Jornada Experimental Range near Las Cruces, New Mexico. The Jornada Experimental Range is an expansive plateau on the Chihuahuan Desert and hosts a complex mosaic of grasses and shrubs that were characterized during PROVE. PROVE researchers collected land and atmospheric measurements for use in validating data from Earth Observing System (EOS) satellites. Measurements included surface reflectance, surface temperature, albedo, and leaf area index, among other parameters. We anticipate that additional data associated with papers published in a recent special issue of Remote Sensing of the Environment (October 2000) will be registered in the ORNL

422

Regenerative Burners Assessment in Holding Reverberatory Furnace  

Science Conference Proceedings (OSTI)

The assessment showed that the regenerative burner furnaces are not profitable in saving energy in addition to the negative impact on the furnace life.

423

NIST to Hold E-Book Conference  

Science Conference Proceedings (OSTI)

... Book 2000 will include an overview of new e-book technologies and a forum for authors. Experts will assess the impact e-books are having on ...

2012-12-13T23:59:59.000Z

424

Glacial Energy Holdings | Open Energy Information  

Open Energy Info (EERE)

Texas Utility Id 54871 Utility Location Yes Ownership R NERC ERCOT Yes NERC MRO Yes NERC NPCC Yes NERC RFC Yes Activity Retail Marketing Yes References EIA Form EIA-861 Final Data...

425

Energy Plus Holdings LLC | Open Energy Information  

Open Energy Info (EERE)

Pennsylvania Utility Id 56265 Utility Location Yes Ownership R NERC NPCC Yes Activity Retail Marketing Yes References EIA Form EIA-861 Final Data File for 2010 - File1a1...

426

North Slope action holds West Coast spotlight  

Science Conference Proceedings (OSTI)

The first oil from a North Slope reservoir outside Prudhoe Bay will begin flowing next year at rate of 80,000 bpd from Kuparuk field now under development by Atlantic Richfield Co. west of Prudhoe Bay. Just north of the Kuparuk development, Conoco Inc. has found a commercial reservoir in the Milne Point unit and will be drilling confirmation and delineation wells later this year and in 1982. Another area which very likely will be developed for production is located northeast of Prudhoe Bay, where Sohio Alaska Petroleum Co. has announced discoveries in 2 Sag Delta wells. In California's San Joaquin Valley, 3 Kern County fields - South Belridge, Elk Hills, and Lost Hills - are the sites of intensive drilling. Seven rigs are working in the Santa Barbara Channel, 3 of them developing known fields from permanent platforms.

Wilson, H.M.

1981-05-25T23:59:59.000Z

427

Nature of the Land-holding Group  

E-Print Network (OSTI)

the Dakota for instance; or the Blackfeet. who became Blood.Piegan. and Blackfeet proper; though even these were each

Kroeber, Alfred

1955-01-01T23:59:59.000Z

428

1988: A good year, if prices hold  

Science Conference Proceedings (OSTI)

This article summarizes the 1988's North American oil market. Some of the highlights are: average rig count for the year should range between 1,010 and 1,020 units; Canadian survey shows E and P expenditures could be up over 20%; drilling in Canada will also be spurred by government incentives expiring in '88; Pemex will double Mexican activity due to a marked E and P budget increase; and last half U.S. wells/footage should post good gains if prices settle around $15.

Maciej, H.

1988-08-01T23:59:59.000Z

429

ORISE: Instructional Design and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Instructional Design and Development Instructional Design and Development The Oak Ridge Institute for Science and Education (ORISE) works with government agencies and organizations to create customized training and instructional design programs, from traditional classroom teaching to online education. ORISE uses a multi-step process to define the instructional design and development needs. Our process includes: Defining the target audience and objectives Designing and developing the program and materials Piloting, delivering and managing the training Evaluating the final product Whether a small- or large-scale effort, ORISE helps determine the most effective approach based on needs and resources, which may include: Collaborative experiences Interactive simulations Self-paced tutorials Guided instructions

430

Lighting Design | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Design Lighting Design July 29, 2012 - 6:28pm Addthis Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. | Photo courtesy of ©iStockphoto.com/chandlerphoto. How does it work? Buy ENERGY STAR-rated lighting for the highest quality, energy-efficient lighting. Use timers and other controls to turn lights on and off. Use outdoor solar lighting. Energy-efficient indoor and outdoor lighting design focuses on ways to improve both the quality and efficiency of lighting. If you're constructing a new house, consider lighting as part of your whole-house design -- an

431

Collocation Methods For Distillation Design  

E-Print Network (OSTI)

In this third paper on collocation methods for distillation design, we explore the use of the collocation models for design of simple distillation columns as well as flexible columns. Solvent recovery plants must deal with a wide range of feeds and still return pure solvents. The design problem we address is a single flexible column within the overall solvent recovery plant. We have developed the models and algorithms in the ASCEND system. We discuss the attributes and use of the ASCEND system. With ASCEND we can create complex models with simple building blocks and interactively learn to solve them. We found the collocation model an excellent tool for distillation design, allowing us to develop new concepts in design strategies. We designed a single column as would exist in a flexible solvent recovery plant for an azeotropic system. It was designed to handle three possible feeds, each with a distinct separation task. For each possible feed to a column, we approximate the operation of ...

Flexible Column; Robert S. Huss; Arthur W. Westerberg

1995-01-01T23:59:59.000Z

432

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network (OSTI)

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

433

NEHRP - Earthquake Resistant Design Research Needs ...  

Science Conference Proceedings (OSTI)

Library. Research Needs Reports Earthquake Resistant Design. Earthquake Resistant Design. 2011. Research Plan for the ...

434

Conceptual design summary  

Science Conference Proceedings (OSTI)

The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world's best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy's (DOE's) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE's Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

Peretz, F.J.

1992-09-01T23:59:59.000Z

435

Conceptual design summary  

Science Conference Proceedings (OSTI)

The Advanced Neutron Source (ANS) is a new basic and applied research facility based on a powerful steady-state research reactor that provides beams of neutrons for measurements and experiments in the fields of materials science and engineering, biology, chemistry, materials analysis, and nuclear science. The useful neutron flux for these experiments will be at least five times, and in some cases twenty times, more than is available at the world`s best existing facilities. In addition, ANS will provide irradiation capabilities for the production of radioisotopes for medical applications, research, and industry and facilities for materials irradiation testing. The need for a new steady-state neutron research facility in the United States was emphasized by the 1984 National Academy Report and confirmed by the Department of Energy`s (DOE`s) Energy Research Advisory Board in 1985. These studies defined a minimum thermal neutron flux requirement of 5 {times} 10{sup 19} m{sup {minus}2} {center_dot} s{sup {minus}1}. The National Steering Committee for an Advanced Neutron Source, with representation from the major fields of science that will use the facility, was established in 1986 and has continued to define the performance requirements and instrument layouts needed by the user community. To minimize technical risks and safety issues, the project adopted a policy of not relying upon new inventions to meet the minimum performance criteria, and the design presented in this report is built on technologies already used in other facilities and development programs: for example, the involute aluminum-clad fuel plates common to HFIR and ILL and the uranium silicide fuel developed in DOE`s Reduced Enrichment for Research and Test Reactors program and tested in reactors worldwide. At the same time, every state-of-the-art technique has been implemented to optimize neutron beam delivery at the experiments.

Peretz, F.J.

1992-09-01T23:59:59.000Z

436

Promoting Learning of Instructional Design via Overlay Design Tools  

E-Print Network (OSTI)

Design Rationale Systems .. 19 Educational & Instructionaldesign and evolution of this system, focusing on how it was crafted to help novice instructional

Carle, Andrew Jacob

2012-01-01T23:59:59.000Z

437

SUPPLEMENTAL ANALYSES FOR SOLVENT HOLD TANK SAMPLES MCU-11-314, MCU-11-315, MCU-11-316, MCU-11-317, MCU-11-318 AND MCU-11-319  

SciTech Connect

Savannah River National Laboratory (SRNL) periodically analyses solvent samples from Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-11-314, MCU-11-315, MCU-11-316, MCU-11-317, MCU-11-318 and MCU-11-319 have been previously reported. MCU has experienced a modest decline in cesium removal efficiency while processing the current feed, 'Macrobatch 3'. While the target decontamination factor (DF) is 200, the fiscal year 2011 DF average is 161. The results of the prior solvent analysis report did not identify a specific factor that would correlate with the poor cesium decontamination beyond a low concentration of the suppressor, trioctylamine. New analyses of the quarterly sample are reported in this document, as well as a cross-check of {sup 137}Cs measurements for SRNL and F/H lab. Furthermore, in an attempt to discover the reason for the decline in DF at MCU, SRNL was tasked with analyzing numerous Caustic Wash Tank (CWT) and chemical feed samples.

Peters, T.; Washington, A; . Fondeur, F.; Fink, S.

2011-09-29T23:59:59.000Z

438

SOLVENT HOLD TANK SAMPLE RESULTS FOR MCU-13-814, MCU-13-815, MCU-13-816, MCU-13,817, MCU-13-818 AND MCU-13-819: QUARTERLY SAMPLE FROM MAY 2013  

SciTech Connect

Savannah River National Laboratory (SRNL) analyzed solvent samples from Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-13-814, MCU-13-815, MCU-13-816, MCU-13-817, MCU-13-818 and MCU-13- 819 received May 28, 2013 are reported. The results show that the solvent at MCU does not require an Isopar L addition, but it will require addition of trioctylamine despite of the 272 g of TOA that was added to the solvent on June 5, 2013 based on the solvent containing a TOA level of 45% of nominal. A new TOA analysis method (HCl titration) has been used and its output was statistically similar to the results from the SVOA-TOA method. This method provides an independent method for measuring TOA and TiDG in MCU-NG solvent. An impurity containing a tert-butyl group was detected in the solvent and further analytical analysis is needed to identify it. SRNL recommends determining the impact of this impurity on the mass transfer ability of the solvent. SRNL also analyzed the SHT sample for {sup 137}Cs content and determined the measured value is above the results observed from the January 2013.

Fondeur, F.; Taylor-Pashow, K.

2013-08-13T23:59:59.000Z

439

Methodologies and new user interfaces to optimize hydraulic fracturing design and evaluate fracturing performance for gas wells  

E-Print Network (OSTI)

This thesis presents and develops efficient and effective methodologies for optimal hydraulic fracture design and fracture performance evaluation. These methods incorporate algorithms that simultaneously optimize all of the treatment parameters while accounting for required constraints. Damage effects, such as closure stress, gel damage and non-Darcy flow, are also considered in the optimal design and evaluation algorithms. Two user-friendly program modules, which are active server page (ASP) based, were developed to implement the utility of the methodologies. Case analysis was executed to demonstrate the workflow of the two modules. Finally, to validate the results from the two modules, results were compared to those from a 3D simulation program. The main contributions of this work are: An optimal fracture design methodology called unified fracture design (UFD) is presented and damage effects are considered in the optimal design calculation. As a by-product of UFD, a fracture evaluation methodology is proposed to conduct well stimulation performance evaluation. The approach is based on calculating and comparing the actual dimensionless productivity index of fractured wells with the benchmark which has been developed for optimized production. To implement the fracture design and evaluation methods, two web ASP based user interfaces were developed; one is called Frac Design (Screening), and the other is Frac Evaluation. Both modules are built to hold the following features. o Friendly web ASP based user interface o Minimum user input o Proppant type and mesh size selection o Damage effects consideration options o Convenient on-line help.

Wang, Wenxin

2005-12-01T23:59:59.000Z

440

Graphic Design, Media and Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphic Design Graphic Design Note: Graphic Design services are available at no charge to BNL and Guest users. There is a charge for laminating and/or mounting of printed posters The Graphic Design Studio is located to the second floor in the north wing of the Research Support Building 400. The telephone number is Ext. 7288. If you have any questions, please call supervisor, Rick Backofen, Ext. 6183. As graphic designers, one of the things we do best, is to solve complex problems using our ability to make ideas visible, culturally, aesthetically and economically. Our work includes a wide range of printed documents and presentation products. We will coordinate the technical aspects of the project and provide a production schedule to meet your requirements. Design

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

NREL: Computational Science - Inverse Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Inverse Design Inverse Design The NREL Computational Science Center collaborates with the High Throughput and Inverse Band Structure (HT/IBS) Group within the Center for Inverse Design (CID) to research, design, and create materials with given target properties. The Center for Inverse Design is an Energy Frontier Research Center of the U.S. Department of Energy Office of Science. To address a crucial scientific grand challenge, the Center is pursuing a new approach to material science. Rather than using the conventional direct approach ("Given the structure, find the electronic properties"), we are using a "materials by inverse design" approach ("Given the desired property, find the structure"). Illustration of a blue arrow pointing to a graphic with three curved lines that represent an electronic structure and blue arrow pointing to a red and blue balls that represent an atomic configuration.

442

Design Team | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Design Team Design Team Design Team October 16, 2013 - 5:17pm Addthis Key Actions in Selecting a Design Team Work with project energy lead to include renewable energy provisions when procuring architectural and engineering services. List specific requirements, including: Energy-related requirements from building program. In-depth energy efficiency and renewable expertise on team. Ability to integrate renewable energy and custom control strategies into energy modeling. An integrated design process and coordination with other contractors. History of verifying building performance. Determine selection criteria ahead of the RFP, including the ability to judge on best-value versus lowest-cost. Create design review team across disciplines, including project energy lead, commissioning agent, and

443

REC Tracking Systems Design Guide  

DOE Green Energy (OSTI)

OAK-B135 The Design Guide is presented in three parts. Section II describes the need for REC tracking, the two principal tracking methods available, and, in simple terms, the operation of certificate-based systems. Section III presents the major issues in the design of certificate-based tracking systems and discusses the advantages and disadvantages of alternative solutions. Finally, Section IV offers design principles or recommendations for most of these issues.

Meredith Wingate

2004-02-03T23:59:59.000Z

444

Duke Edwardsport Generic Design Specification  

Science Conference Proceedings (OSTI)

This generic design specification (GDS) is sponsored by the CoalFleet for Tomorrow program of the Electric Power Research Institute (EPRI). The CoalFleet Integrated Gasification Combined Cycle (IGCC) Design Guidelines Experts Group produced this report, which is based on available public sources and information. The CoalFleet IGCC Design Guidelines Experts Group consists of more than 10 IGCC experts, including independent consultants and EPRI staff.

2011-01-20T23:59:59.000Z

445

COLD STORAGE DESIGN REFRIGERATION EQUIPMENT  

E-Print Network (OSTI)

COLD STORAGE DESIGN AND REFRIGERATION EQUIPMENT REFRIGERATION OF FISH - PART 1 \\ "..\\- ,,, T I Fishery Leaflet 427 Washington 25, D. C. June 1956 REFRIGERATION OF FISH - PART em; COlD STORAGE DESIGN · · · · · 18 Specific design features 0 0 · · · · · · · · · · · · · · 19 Refrigerated surfaces 0 · · 0 0 0 · 0

446

Transmission Line Design and Construction  

Science Conference Proceedings (OSTI)

The power industry wants to construct reliable and cost-effective overhead lines. A reliable and cost effective line requires not only that the line and structures meet design criteria for strength, clearances, and electrical considerations, but also that it be designed for safe and easy construction and maintenance. Design and construction practices should therefore go hand in hand. Information among various departments within a utility has to be shared for mutual benefit. Communication is a key ...

2012-12-31T23:59:59.000Z

447

Diversion tanks will prevent field shutdown: design-build project is 80% alaskan  

SciTech Connect

The nation's second largest oil field is nearing peak production of 250,000 bbl per day. The Kuparuk River field on Alaska's North Slope put a second central processing facility (CPF-2) on line this year and a third will arrive on the 1986 sea lift. By 1990, the field will hold 400 producing wells and 400 water injection wells. Considering this investment, field operator Arco Alaska Inc., wanted to find a way to avoid costly field shutdowns that could be caused by oil-gas-water separation system problems or a temporary shutdown of the trans-Alaska pipeline or Alyeska terminal. The answer was a system of diversion tanks through which 220,000 bbl of crude could be kept circulating until problems could be corrected. The design and construction of these tanks are described.

Harris, M.

1985-12-01T23:59:59.000Z

448

GCFR steam generator conceptual design  

SciTech Connect

The gas-cooled fast reactor (GCFR) steam generators are large once-through heat exchangers with helically coiled tube bundles. In the GCFR demonstration plant, hot helium from the reactor core is passed through these units to produce superheated steam, which is used by the turbine generators to produce electrical power. The paper describes the conceptual design of the steam generator. The major components and functions of the design are addressed. The topics discussed are the configuration, operating conditions, design criteria, and the design verification and support programs.

Holm, R.A.; Elliott, J.P.

1980-01-01T23:59:59.000Z

449

Manufacturer's Mixed Pallet Design Problem  

E-Print Network (OSTI)

fore, the company decided to design a number of mixed or rainbow pallets so that its customers can order ...... Squeezing out waste of space. 62, 5, page 112.

450

NREL: Technology Deployment - Microgrid Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Microgrid Design Microgrid Design Photo of a microgrid test site at the National Wind Technology Center. NREL designs independent electrical generation and distribution systems called microgrids, which deliver energy that is reliable, economical, and sustainable. NREL experts work with military, government, industry, and other organizations that cannot afford to lose power to develop reliable and cost-effective microgrid systems. Expertise and Knowledge NREL offers microgrid technical expertise and project support that includes engineering, energy analysis and modeling, financial analysis, and energy management. Our comprehensive and innovative approach to microgrid design is called Continuously Optimized Reliable Energy (CORE) Microgrids. The CORE microgrid approach includes advantages such as:

451

METHODOLOGY FOR DEVELOPMENT OF DESIGN ...  

Science Conference Proceedings (OSTI)

... was also proposed for developing design criteria based on ... loss of power due to wind induced damage to transmission tower or power line ...

2010-12-13T23:59:59.000Z

452

Design of lightweigh electric vehicles.  

E-Print Network (OSTI)

??The design and manufacture of lightweight electric vehicles is becoming increasingly important with the rising cost of petrol, and the effects emissions from petrol powered (more)

de Fluiter, Travis

2008-01-01T23:59:59.000Z

453

System, Stack and Component Design  

Science Conference Proceedings (OSTI)

Oct 17, 2011 ... Energy Conversion/Fuel Cells: System, Stack and Component Design ... In fuel cell mode it produces electricity and heat from hydrogen, and in...

454

ColdDesignGuide.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

orientation, window area, and shading strategies for homes in Minneapolis, Minnesota. The energy use was calculated for many window design variations including 5 orientations, 3...

455

Design Fires for Structures Project  

Science Conference Proceedings (OSTI)

... eg, ISO 834), or prescribed, non-standard heating rates (provided by oil-burners). ... the design of the fuel delivery system (eg, natural gas burners) to ...

2013-11-13T23:59:59.000Z

456

Solar lumber kilns: design ideas  

DOE Green Energy (OSTI)

A solar kiln and its advantages are described. Drying fundamentals, design factors, and economics are discussed. Three operating solar kilns are described.

Robbins, A. M.

457

Bake Oven Design and Improvement  

Science Conference Proceedings (OSTI)

Mar 13, 2012 ... Electrode Technology for Aluminium Production: Bake Oven Design and ... from shaft calciners is recovered for heating coal tar pitch and power...

458

Material-based design computation  

E-Print Network (OSTI)

The institutionalized separation between form, structure and material, deeply embedded in modernist design theory, paralleled by a methodological partitioning between modeling, analysis and fabrication, resulted in ...

Oxman, Neri

2010-01-01T23:59:59.000Z

459

Design Factors That Influence Corrosion  

Science Conference Proceedings (OSTI)

Table 3   Corrosion factors that can influence design considerations...Inhibitors Inspection Planned maintenance Source: Ref 25...

460

Fully Integrating the Design Process  

SciTech Connect

The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

T.A. Bjornard; R.S. Bean

2008-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

PL FINAL DESIGN REPORT. VOLUME I. PLANT DESIGN  

SciTech Connect

The plant design for PL-2, a 1000-kw net electric direct cycle boiling water nuclear power plant, is presented. The design includes all buildings, foundations, and structures required for the installation of the plant in a snow tunnel. (M.C.G.)

1961-06-30T23:59:59.000Z

462

The convergence of sustainable technologies and architectural design expression  

E-Print Network (OSTI)

In recent years an unprecedented ecological awareness has taken hold, not only within the discipline of architecture, but throughout our society as well. No longer are we, as a culture, accepting of the long established ...

Phillips, Jason Patrick, 1973-

2003-01-01T23:59:59.000Z

463

Active solar thermal design manual  

SciTech Connect

This manual is aimed at systems design engineers, architects, system supplier/installers, and contractor/builders. Practical information for both skilled and inexperienced designers. Solar thermal applications focuses on residential and commercial space heating, potable hot water heating, process water heating, and space cooling.

1985-01-01T23:59:59.000Z

464

Optimal designs for conjoint experiments  

Science Conference Proceedings (OSTI)

In conjoint experiments, each respondent receives a set of profiles to rate. Sometimes, the profiles are expensive prototypes that respondents have to test before rating them. Designing these experiments involves determining how many and which profiles ... Keywords: Conjoint experiments, D-optimality, Optimal block design, Optimal block sizes, Prototype testing

Roselinde Kessels; Peter Goos; Martina Vandebroek

2008-01-01T23:59:59.000Z

465

Suicide effects: designing for death  

Science Conference Proceedings (OSTI)

This paper presents design ideas and suggestions for digital signage systems within the Tokyo transportation system to create and nurture social and community engagement around the phenomena of train suicide. This method of taking one's own life is widespread ... Keywords: death, design, public display, social media, suicide, transport, urban information systems

Jan Rod; Connor Graham; Martin Gibbs

2011-06-01T23:59:59.000Z

466

Design of a neighborhood pathfinder  

Science Conference Proceedings (OSTI)

Everyone understands their city in a slightly different way. This project seeks to leverage these differences by allowing people to share their understandings and compile a visual social history of the city.Most wayfinding systems are designed around ... Keywords: GPS, context-aware computing, handheld devices and mobile computing, interaction design, prototyping, user research, wayfinding

Jeff Howard; Jodi Forlizzi

2005-11-01T23:59:59.000Z

467

MINIMARS conceptual design: Final report  

DOE Green Energy (OSTI)

This volume contains the following sections: (1) fueling systems; (2) blanket; (3) alternative blanket concepts; (4) halo scraper/direct converter system study and final conceptual design; (5) heat-transport and power-conversion systems; (6) tritium systems; (7) minimars air detritiation system; (8) appropriate radiological safety design criteria; and (9) cost estimate. (MOW)

Lee, J.D. (ed.)

1986-09-01T23:59:59.000Z

468

Contemporary data path design optimization  

E-Print Network (OSTI)

power consumption, instead of performance, becomes the most critical concern in many data-path designs, especially for mobile devicePower consumption becomes more critical issue than performance in modern data-path designs, especially for mobile devicepower consumption. Furthermore, we also implement the PST algorithm on both ASIC and FPGA devices

Liu, Jianhua

2006-01-01T23:59:59.000Z

469

MSc Design of Rotating Machines  

E-Print Network (OSTI)

design management and intellectual skills of communication in a group working environment. Focus on your interests The Machine Design specialism aims to provide students with a greater degree of training of stress analysis, machine dynamics, transmissions, computer aided engineering, and project management

470

Nuclear power plant design analysis  

SciTech Connect

Information concerning the engineering aspects of the design of commercial nuclear power plants is presented. Topics discussed include: electric utility economics; nuclear plant cconomics; thermal-transport systems and core design; nuclear analysis methods; safcty requirements; fuel-system analysis; dcsign considerations; and optimization approaches. (DCC)

Sesonske, A.

1973-01-01T23:59:59.000Z

471

Design review report for multiport riser final design review  

DOE Green Energy (OSTI)

This design review examined the design documents contained in a notebook prepared for the final design review of the multiport riser assembly. This assembly will support the Hydrogen Mitigation Test program for mitigation of safety issues for Hanford Waste Tank 241-SY-101. The purpose of the Multiport Riser is to provide multiple access ports of several diameters in a single 42 inch riser for simultaneous access of test and support equipment. The notebook was titled: {open_quotes}Multiport Riser Final Design Review.{close_quotes} The review was conducted using a database comment registration system whereby the reviewer comments were entered into the database and each comment was given a unique identifier. During the review, each comment was referred to by its identifier. Changes to comments, responses, and actions needed were made with the agreement of the committee and the reviewers at the formal design review meeting held March 1, 1994. When the structural analyses were available, they were distributed for review which allowed closure of all design review comments. Approval of the design was achieved and supporting documents are included in this report.

McWethy, L.M.; Sheen, E.M.

1994-05-01T23:59:59.000Z

472

NSLS-II Design and Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS-II Design & Performance NSLS-II CD-0 Proposal Preliminary Design Report (PDR) Conceptual Design Report (CDR) Source Properties (.pdf) Cell section Last Modified: April 2,...

473

design | OpenEI Community  

Open Energy Info (EERE)

design design Home Dc's picture Submitted by Dc(15) Member 17 September, 2013 - 12:39 Are you willing to reply to a text message once a day with information about your comfort level at your indoor location? building comfort design improve incentive indoor message sms text Yes 60% (3 votes) No 0% (0 votes) Maybe if I had an incentive 20% (1 vote) Maybe if my reply is confidential and anonymous 0% (0 votes) Maybe if the data will be used to improve building design 20% (1 vote) Total votes: 5 Buildings account for roughly 40% of all U.S. energy use (70% of all electricity): residential buildings account for 22% of all U.S. energy use and commercial buildings account for 18% of all U.S. energy use[i]. There is an unanswered need for information about buildings in use and how building design affects building occupant comfort, productivity, and, by

474

SOLVENT HOLD TANK SAMPLE RESULTS FOR MCU-11-314, MCU-11-315, MCU-11-316, MCU-11-317, MCU-11-318 AND MCU-11-319  

SciTech Connect

Savannah River National Laboratory (SRNL) analyzed solvent samples from Modular Caustic-Side Solvent Extraction Unit (MCU) in support of continuing operations. A quarterly analysis of the solvent is required to maintain solvent composition within specifications. Analytical results of the analyses of Solvent Hold Tank (SHT) samples MCU-11-314, MCU-11-315, MCU-11-316, MCU-11-317, MCU-11-318 and MCU-11-319 are reported. The results show that the solvent at MCU does not require an Isopar{reg_sign} L addition, but it will require addition of trioctylamine. Cesium mass transfer testing with the solvent matches expected extraction behavior but shows a slightly lower stripping efficiency than seen in the original process demonstration for Macrobatch 3. The entrained aqueous solution indicates the scrub wash is significantly out of specification. As a result, the facility replaced the scrub wash. Unlike the previous solvent sample results, these analyses indicate that the solvent does not require minor Isopar{reg_sign} L trimming at this time. However, addition of TOA is warranted. These findings indicate that the new protocols for solvent monitoring and control are yielding favorable results. Nevertheless, the deviation in the TOA concentration since the last analysis indicates continued periodic (i.e., quarterly) monitoring is recommended. The {sup 137}Cs mass transfer results from the solvent sample testing show possible evidence of slightly reduced stripping efficiency. An evaluation (using a model) of expected system performance for MCU using the measured distribution values predicts an {approx}50% decline in DFs given the ESS test results. The customer should consider pulling a SHT sample for reanalysis.

Peters, T.; Washington, A.; Fondeur, F.; Fink, S.

2011-06-09T23:59:59.000Z

475

Integrated design : a generative multi-performative design approach  

E-Print Network (OSTI)

There are building systems, called "modularized", in which the component systems (for structure, lighting, etc) can be analyzed and synthesized independently since their performance and design do not interact or affect one ...

Fasoulaki, Eleftheria

2008-01-01T23:59:59.000Z

476

A ROBUST TOPOLOGICAL PRELIMINARY DESIGN EXPLORATION METHOD WITH MATERIALS DESIGN  

E-Print Network (OSTI)

­ Volume ­ Cost ­ Performance · Balance-of-plant (BOP) components ­ Weight ­ Cost ­ Availability, and composite layup · Measure tank strength and fatigue life #12;Track 1: Optimization of materials & design

477

Designing for recombination: process design through template combination  

Science Conference Proceedings (OSTI)

Process design remains an important yet difficult concern for postindustrial organizations. We posit that processes become' processes in these organizations only via their anchoring in concrete artifacts. Consequently, we identify and refine two ... Keywords: artifacts, business process, granularity, recombination, templates

Arvind Karunakaran; Sandeep Purao

2012-05-01T23:59:59.000Z

478

Secondary Containment Design for a  

E-Print Network (OSTI)

Secondary containment for high speed rotating machinery, such as a centrifuge, is extremely important for operating personnel safety. Containment techniques can be very costly, ungainly and time consuming to construct. A novel containment concept is introduced which is fabricated out of modular sections of polycarbonate glazed into a Unistrut metal frame. A containment study for a high speed centrifuge is performed which includes the development of parameters for secondary containment design. The Unistrut/polycarbonate shield framing concept is presented including design details and proof testing procedures. The economical fabrication and modularity of the design indicates a usefulness for this shielding system in a

High Speed Centrifuge; Keith W. Snyder

1999-01-01T23:59:59.000Z

479

Energy-conserving site design  

SciTech Connect

Information useful to landscape architects, architects, planners, engineers, students, and homeowners is presented. The concepts and examples needed to create more energy-efficient landscapes are described. The book is organized into five sections, including: an overview and history of energy-efficient design research; detailed information and new strategies on site analysis and planning; energy-efficient landscape design of clustered and single residences; alternative energy-conserving scenarios for the future; and appendices. The appendices contain such technical information as: lists of energy-conserving design options, formulas to calculate solar radiation and soil temperatures, tools for climatic analysis, and techniques for precision planting for solar control and access.

McPherson, E.G. (ed.)

1984-01-01T23:59:59.000Z

480

BEFORE THE U.S. DEPARTMENT OF ENERGY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Watermarl' Designs, Ltd. Watermarl' Designs, Ltd. (Showerheads) ) ) ) ) ) Case Number: 2011-SW-2908 NOTICE OF PROPOSED CIVIL PENALTY Date issued: May 10, 2012 Number of alleged violations: 63 Maximum possible assessment: $12,600 Proposed civil penalty: $12,600 The U.S. Department of Energy ("DOE") Office of the General Counsel, Office of Enforcement, alleges that Watermark Designs, Ltd. ("Watermark") has violated certain provisions of the Energy Policy and Conservation Act, 42 U.S.C. § 6291 et seq. ("the Act"), and 10 C.F.R. Pmis 429 and 430. Specifically, DOE alleges: I. Watermark's showerhead basic model SH-FAL90 is a "covered product" as defined in 42 U.S.C. §§ 6291(2), 6292(a)(l5) and 10 C.F.R. § 430.2. 2. DOE purchased and tested four units of basic model SH-FAL90 in accordance with DOE

Note: This page contains sample records for the topic "watermark designs holdings" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Sandia National Labs: PCNSC: Partnering: Designated Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships Research Partnering Designated Capabilities The "Physical, Chemical, and Nano Sciences Designated Capabilities" 'umbrella' agreement, approved by the Department of...

482

Abstract: Experiment Design for Scientists and Engineers  

Science Conference Proceedings (OSTI)

Education and Training: Experiment Design for Engineers and ... Experiment design is a systematic, rigorous, data-based approach to scientific ...

2013-10-30T23:59:59.000Z

483

Design methods for ethical persuasive computing  

Science Conference Proceedings (OSTI)

Value Sensitive Design and Participatory Design are two methodological frameworks that account for ethical issues throughout the process of technology design. Through analysis and case studies, this paper argues that such methods should be applied to ... Keywords: design methods, participatory design, persuasive technology, value sensitive design

Janet Davis

2009-04-01T23:59:59.000Z

484

Standards, Open Systems and Design  

E-Print Network (OSTI)

Design is the fundamental soul of a humanmade creation that ends up expressing itself in successive outer layers of the product or service. -Steve Jobs From the presentation of: Fumiko Ichikawa, Innovation Lab,

Ken Krechmer

2011-01-01T23:59:59.000Z

485

Premium Power Industrial Park Design  

Science Conference Proceedings (OSTI)

This report is intended to provide insights on the consideration, design, and implementation of power quality (PQ) parks -- business parks where superb electric power quality, reliability, and availability (QRA) are optimized for the businesses within the park.

2002-02-14T23:59:59.000Z

486

The Design of RELAX NG  

E-Print Network (OSTI)

RELAX NG is a new schema language for XML. This paper discusses various aspects of the design of RELAX NG including the treatment of attributes, datatyping, mixed content, unordered content namespaces, cross-references and modularity.

James Clark

2001-01-01T23:59:59.000Z

487

Slow Technology Designing for Reflection  

Science Conference Proceedings (OSTI)

As computers are increasingly woven into the fabric of everyday life, interaction design may have to change from creating only fast and efficient tools to be used during a limited time in specific situations, to creating technology that surrounds ...

Lars Hallns; Johan Redstrm

2001-01-01T23:59:59.000Z

488

Additive Manufacturing - Materials by Design  

Livermore materials scientists and engineers are designing and building new materials that will open up new spaces on many Ashby material selection charts, such as those for stiffness and density as well as thermal expansion and stiffness. This is ...

489

Basic EETD Web Page Design  

NLE Websites -- All DOE Office Websites (Extended Search)

Basic EETD Web Page Design Speaker(s): Eve Edelson Date: May 27, 2005 - 12:00pm Location: Bldg. 90 Seminar HostPoint of Contact: Allan Chen This talk will provide information...

490

Tritium Recycling (Processing) Facility Design  

Science Conference Proceedings (OSTI)

Design, Operation, and Maintenance of Tritium System / Proceedings of the Fifth Topical Meeting on Tritium Technology In Fission, Fusion, and Isotopic Applications Belgirate, Italy May 28-June 3, 1995

Jack Metzler; Thuy Le

491

Designing cities for the elderly  

E-Print Network (OSTI)

This thesis seeks to answer how urban design in an established town can be adapted to accommodate an aging population. It uses the town of Brookline, Massachusetts, as an example of a community making active efforts to ...

Lee, David, M.C.P. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

492

Weelchair exercise roller product design  

E-Print Network (OSTI)

Inspired by bicycle training rollers, a wheelchair exercise roller (an exercise machine for the application of wheelchair users) was designed from conception of idea to alpha prototype. Background and market data was ...

Su, Benjamin W

2005-01-01T23:59:59.000Z

493

Implementing Safeguards-by-Design  

Science Conference Proceedings (OSTI)

Executive Summary Excerpt Safeguards-by-Design (SBD) is an approach to the design and construction of nuclear facilities whereby safeguards are designed-in from the very beginning. It is a systematic and structured approach for fully integrating international and national safeguards (MC&A), physical security, and other proliferation barriers into the design and construction process for nuclear facilities. SBD is primarily a project management or project coordination challenge, and this report focuses on that aspect of SBD. The present report continues the work begun in 2008 and focuses specifically on the design process, or project management and coordination - the planning, definition, organization, coordination, scheduling and interaction of activities of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project, in order to provide the project context within which the safeguards design activities take place, describes the involvement of safeguards experts in the design process, the nature of their analyses, interactions and decisions, as well as describing the documents created and how they are used. Designing and constructing a nuclear facility is an extremely complex undertaking. The stakeholders in an actual project are many owner, operator, State regulators, nuclear facility primary contractor, subcontractors (e.g. instrument suppliers), architect engineers, project management team, safeguards, safety and security experts, in addition to the IAEA and its team. The purpose of the present report is to provide a common basis for discussions amongst stakeholders to collaboratively develop a SBD approach that will be both practically useful and mutually beneficial. The principal conclusions from the present study are: In the short term, the successful implementation of SBD is principally a project management problem. Life-cycle cost analysis can be a useful tool in safeguards design. An important obstacle to straight forward application of life-cycle cost analysis is that there is no single organization responsible for the entire life-cycle cost of the facility. The Safeguards Effectiveness Report (SGER) is proposed as a focus for the safeguards design activities, and is intended to be a living document that contains increasing safeguards relevant scope and content as the facility design emerges. Further work is required in a number of areas. The authors note that other studies supported by NGSI are addressing the development of requirements and performance criteria, as well as contributing to the design toolkit through the development of technology, methodology, and safeguards guidelines for designers. With respect to further development of the SBD design process, the authors recommend: In the short term, conduct a workshop with interested industry representatives, to ensure that their perspectives and needs are factored into further development. In the short term, provide NGSI SBD project documents to IAEA, and support them in the conduct of an SBD Workshop II. In the medium term, continue to support the SBD demonstration work started with the Next Generation Nuclear Plant project. In the longer term, conduct further studies to examine the integration of SBD into projects with concurrent consideration of physical security and safety.

Trond Bjornard; Robert Bean; Phillip Casey Durst; John Hockert; James Morgan

2010-02-01T23:59:59.000Z

494

Manufacturing System Design Framework Manual  

E-Print Network (OSTI)

Previous Lean Aerospace Initiative research in factory operations had indicated that the greatest performance gains are realized when the manufacturing system is designed from the top down and from supplier to the customer. ...

Vaughn, Amanda

2002-01-01T23:59:59.000Z

495

Inherently Reliable Boiler Component Design  

Science Conference Proceedings (OSTI)

This report summarizes the lessons learned during the last decade in efforts to improve the reliability and availability of boilers used in the production of electricity. The information in this report can assist in component modifications and new boiler designs.

2003-03-31T23:59:59.000Z

496

Mechanical considerations and design skills.  

SciTech Connect

The purpose of the report is to provide experienced-based insights into design processes that will benefit designers beginning their employment at Sandia National Laboratories or those assuming new design responsibilities. The main purpose of this document is to provide engineers with the practical aspects of system design. The material discussed here may not be new to some readers, but some of it was to me. Transforming an idea to a design to solve a problem is a skill, and skills are similar to history lessons. We gain these skills from experience, and many of us have not been fortunate enough to grow in an environment that provided the skills that we now need. I was fortunate to grow up on a farm where we had to learn how to maintain and operate several different kinds of engines and machines. If you are like me, my formal experience is partially based upon the two universities from which I graduated, where few practical applications of the technologies were taught. What was taught was mainly theoretical, and few instructors had practical experience to offer the students. I understand this, as students have their hands full just to learn the theoretical. The practical part was mainly left up to 'on the job experience'. However, I believe it is better to learn the practical applications early and apply them quickly 'on the job'. System design engineers need to know several technical things, both in and out of their field of expertise. An engineer is not expected to know everything, but he should know when to ask an expert for assistance. This 'expert' can be in any field, whether it is in analyses, drafting, machining, material properties, testing, etc. The best expert is a person who has practical experience in the area of needed information, and consulting with that individual can be the best and quickest way for one to learn. If the information provided here can improve your design skills and save one design from having a problem, save cost of development, or reduce difficulty in manufacturing, then my writing effort will have been worthwhile. It is also my hope that you will freely provide others with design information that you have found beneficial to the less-experienced engineers. The result will be that as a whole, the designs will improve, and the development time will be shortened from start of the design to full system operation or deployment.

Alvis, Robert L.

2008-03-01T23:59:59.000Z

497

An Oil Pipeline Design Problem  

Science Conference Proceedings (OSTI)

We consider a given set of offshore platforms and onshore wells producing known (or estimated) amounts of oil to be connected to a port. Connections may take place directly between platforms, well sites, and the port, or may go through connection points ... Keywords: Algorithms: interactive branch-and-bound with valid inequalities. industries, Applications: design problem-formulation and analysis. programming, Integer, Networks/graphs, Petroleum/natural gas: oil pipeline network design

Jack Brimberg; Pierre Hansen; Keh-Wei Lin; Nenad Mladenovic; Michle Breton

2003-03-01T23:59:59.000Z

498

Designing Self-Modifying Agents  

E-Print Network (OSTI)

Agents need to be able to adapt to changes in their environment. One way to achieve this, is to provide agents with the ability of self-modification. Self-modification requires reflection and strategies with which new knowledge can be acquired, a necessary condition for creativity. This paper describes a knowledge-level model for the design of self-modifying agents and explores the feasibility of automatically designing self-modifying agents.

Frances M.T. Brazier; Frances M. T; Brazier; Niek J. E. Wijngaards