National Library of Energy BETA

Sample records for water-cooled ice machines

  1. Covered Product Category: Water-Cooled Ice Machines

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Federal Energy Management Program (FEMP) provides acquisition guidance and federal efficiency requirements for water-cooled ice machines.

  2. Covered Product Category: Water-Cooled Ice Machines | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department of Energy Whole-Home Gas Tankless WaterEnergy

  3. Covered Product Category: Air-Cooled Ice Machines

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for air-cooled ice machines, which are covered by the ENERGY STAR program.

  4. Water cooled steam jet

    DOE Patents [OSTI]

    Wagner, E.P. Jr.

    1999-01-12

    A water cooled steam jet for transferring fluid and preventing vapor lock, or vaporization of the fluid being transferred, has a venturi nozzle and a cooling jacket. The venturi nozzle produces a high velocity flow which creates a vacuum to draw fluid from a source of fluid. The venturi nozzle has a converging section connected to a source of steam, a diffuser section attached to an outlet and a throat portion disposed there between. The cooling jacket surrounds the venturi nozzle and a suction tube through which the fluid is being drawn into the venturi nozzle. Coolant flows through the cooling jacket. The cooling jacket dissipates heat generated by the venturi nozzle to prevent vapor lock. 2 figs.

  5. Water cooled steam jet

    DOE Patents [OSTI]

    Wagner, Jr., Edward P. (Idaho Falls, ID)

    1999-01-01

    A water cooled steam jet for transferring fluid and preventing vapor lock, or vaporization of the fluid being transferred, has a venturi nozzle and a cooling jacket. The venturi nozzle produces a high velocity flow which creates a vacuum to draw fluid from a source of fluid. The venturi nozzle has a converging section connected to a source of steam, a diffuser section attached to an outlet and a throat portion disposed therebetween. The cooling jacket surrounds the venturi nozzle and a suction tube through which the fluid is being drawn into the venturi nozzle. Coolant flows through the cooling jacket. The cooling jacket dissipates heat generated by the venturi nozzle to prevent vapor lock.

  6. Purchasing Energy-Efficient Air-Cooled Ice Machines

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Federal Energy Management Program (FEMP) provides acquisition guidance for air-cooled ice machines, a product category covered by ENERGY STAR efficiency requirements. Federal laws and requirements mandate that agencies purchase ENERGY STAR-qualified products or FEMP-designated products in all product categories covered by these programs and in any acquisition actions that are not specifically exempted by law.

  7. Ground Water Cooling System 

    E-Print Network [OSTI]

    Greaves, K.; Chave, G. H.

    1984-01-01

    has a total shop area of 128,000 square feet and the majority of the machine tools are equipped with computerized numerical controls. The cooling system was designed around five (5) floor mounted, 50,000 CFM, air handling units which had been...

  8. Stability analysis of supercritical water cooled reactors

    E-Print Network [OSTI]

    Zhao, Jiyun, Ph. D. Massachusetts Institute of Technology

    2005-01-01

    The Supercritical Water-Cooled Reactor (SCWR) is a concept for an advanced reactor that will operate at high pressure (25MPa) and high temperature (500°C average core exit). The high coolant temperature as it leaves the ...

  9. Aalborg Universitet Water cooling of high power light emitting diode

    E-Print Network [OSTI]

    Berning, Torsten

    Aalborg Universitet Water cooling of high power light emitting diode Sřrensen, Henrik Published in Citation for published version (APA): Sřrensen, H. (2012). Water cooling of high power light emitting diode from vbn.aau.dk on: juli 07, 2015 #12;Water Cooling of High Power Light Emitting Diode Henrik Sřrensen

  10. Covered Product Category: Water-Cooled Electric Chillers | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electric Chillers Covered Product Category: Water-Cooled Electric Chillers The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency...

  11. Candidate Materials Evaluation for Supercritical Water-Cooled Reactor

    SciTech Connect (OSTI)

    T. R. Allen and G. S. Was

    2008-12-12

    Final technical report on the corrosion, stress corrosion cracking, and radiation response of candidate materials for the supercritical water-cooled reactor concept.

  12. Development of Materials for Supercritical-Water-Cooled Reactor

    Office of Energy Efficiency and Renewable Energy (EERE)

    Supercritical-Water-Cooled Reactor (SCWR) was selected as one of the promising candidates in Generation IV reactors for its prominent advantages; those are the high thermal efficiency, the system...

  13. An Improved Simple Chilled Water Cooling Coil Model

    E-Print Network [OSTI]

    Wang, Liping

    2014-01-01

    design and control of chilled water systems, Ph.D. Thesis,Dynamic modeling of chilled water cooling coils. PhD thesis,of the ratio of the water-side to the air-side conductance

  14. Covered Product Category: Water-Cooled Electric Chillers

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including water-cooled electric chillers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  15. Pink-Beam, Highly-Accurate Compact Water Cooled Slits

    SciTech Connect (OSTI)

    Lyndaker, Aaron; Deyhim, Alex; Jayne, Richard; Waterman, Dave; Caletka, Dave; Steadman, Paul; Dhesi, Sarnjeet

    2007-01-19

    Advanced Design Consulting, Inc. (ADC) has designed accurate compact slits for applications where high precision is required. The system consists of vertical and horizontal slit mechanisms, a vacuum vessel which houses them, water cooling lines with vacuum guards connected to the individual blades, stepper motors with linear encoders, limit (home position) switches and electrical connections including internal wiring for a drain current measurement system. The total slit size is adjustable from 0 to 15 mm both vertically and horizontally. Each of the four blades are individually controlled and motorized. In this paper, a summary of the design and Finite Element Analysis of the system are presented.

  16. Disposition of transuranic residues from plutonium isentropic compression experiment (Pu-ice) conducted at Z machine

    SciTech Connect (OSTI)

    Goyal, Kapil K [Los Alamos National Laboratory; French, David M [Los Alamos National Laboratory; Humphrey, Betty J [WESTON SOLUTIONS INC.; Gluth, Jeffry [SNL

    2010-01-01

    In 1992, the U.S. Congress passed legislation to discontinue above- and below-ground testing of nuclear weapons. Because of this, the U.S. Department of Energy (DOE) must rely on laboratory experiments and computer-based calculations to verify the reliability of the nation's nuclear stockpile. The Sandia National Laboratories/New Mexico (SNL/NM) Z machine was developed by the DOE to support its science-based approach to stockpile stewardship. SNL/NM researchers also use the Z machine to test radiation effects on various materials in experiments designed to mimic nuclear explosions. Numerous components, parts, and materials have been tested. These experiments use a variety of radionuclides; however, plutonium (Pu) isotopes with greater than ninety-eight percent enrichment are the primary radionuclides used in the experiments designed for stockpile stewardship. In May 2006, SNL/NM received authority that the Z Machine Isentropic Compression Experiments could commence. Los Alamos National Laboratory (LANL) provided the plutonium targets and loaded the target assemblies, which were fabricated by SNL/NM. LANL shipped the loaded assemblies to SNL/NM for Z machine experiments. Three experiments were conducted from May through July 2006. The residues from each experiment, which weighed up to 913 pounds, were metallic and packaged into a respective 55-gallon drum each. Based on a memorandum of understanding between the two laboratories, LANL provides the plutonium samples and the respective radio-isotopic information. SNL/NM conducts the experiments and provides temporary storage for the drums until shipment to LANL for final waste certification for disposal at the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico. This paper presents a comprehensive approach for documenting generator knowledge for characterization of waste in cooperation with scientists at the two laboratories and addresses a variety of topics such as material control and accountability, safeguards of material, termination of safeguards for eventual shipment from SNL/NM to LANL, associated approvals from DOE-Carlsbad Field Office, which governs WIPP and various notifications. It portrays a comprehensive approach needed for successful completion of a complex project between two national laboratories.

  17. Disposition of transuranic residues from plutonium isentropic compression experiment (Pu-ICE) constucted at Z machine

    SciTech Connect (OSTI)

    Goyal, Kapil K [Los Alamos National Laboratory; French, David M [Los Alamos National Laboratory; Humphrey, Betty J [WESTON SOLUTIONS INC.; Gluth, Jeffry [SNL

    2010-01-01

    In 1992, the U.S. Congress passed legislation to discontinue above- and below-ground testing of nuclear weapons. Because of this, the U.S. Department of Energy (DOE) must rely on laboratory experiments and computer-based calculations to verify the reliability of the nuclear stockpile. The Sandia National Laboratories/New Mexico (SNL/NM) Z machine was developed to support the science-based approach for mimicking nuclear explosions and stockpile stewardship. Plutonium (Pu) isotopes with greater than ninety-eight percent enrichment were used in the experiments. In May 2006, SNL/NM received authority that the Z Machine Isentropic Compression Experiments could commence. Los Alamos National Laboratory (LANL) provided the plutonium targets and loaded the target assemblies provided by SNL/NM. Three experiments were conducted from May through July 2006. The residues from each experiment, which weighed up to 913 pounds, were metallic and were packaged into a 55-gallon drum each. SNL/NM conducts the experiments and provides temporary storage for the drums until shipment to LANL for final waste certification for disposal at the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico. This paper presents a comprehensive approach for documenting generator knowledge for characterization of waste in cooperation with scientists at the two laboratories and addresses a variety of essential topics.

  18. Fabrication of gas turbine water-cooled composite nozzle and bucket hardware employing plasma spray process

    DOE Patents [OSTI]

    Schilke, Peter W. (4 Hempshire Ct., Scotia, NY 12302); Muth, Myron C. (R.D. #3, Western Ave., Amsterdam, NY 12010); Schilling, William F. (301 Garnsey Rd., Rexford, NY 12148); Rairden, III, John R. (6 Coronet Ct., Schenectady, NY 12309)

    1983-01-01

    In the method for fabrication of water-cooled composite nozzle and bucket hardware for high temperature gas turbines, a high thermal conductivity copper alloy is applied, employing a high velocity/low pressure (HV/LP) plasma arc spraying process, to an assembly comprising a structural framework of copper alloy or a nickel-based super alloy, or combination of the two, and overlying cooling tubes. The copper alloy is plamsa sprayed to a coating thickness sufficient to completely cover the cooling tubes, and to allow for machining back of the copper alloy to create a smooth surface having a thickness of from 0.010 inch (0.254 mm) to 0.150 inch (3.18 mm) or more. The layer of copper applied by the plasma spraying has no continuous porosity, and advantageously may readily be employed to sustain a pressure differential during hot isostatic pressing (HIP) bonding of the overall structure to enhance bonding by solid state diffusion between the component parts of the structure.

  19. Fluidized bed heat exchanger with water cooled air distributor and dust hopper

    DOE Patents [OSTI]

    Jukkola, Walfred W. (Westport, CT); Leon, Albert M. (Mamaroneck, NY); Van Dyk, Jr., Garritt C. (Bethel, CT); McCoy, Daniel E. (Williamsport, PA); Fisher, Barry L. (Montgomery, PA); Saiers, Timothy L. (Williamsport, PA); Karstetter, Marlin E. (Loganton, PA)

    1981-11-24

    A fluidized bed heat exchanger is provided in which air is passed through a bed of particulate material containing fuel. A steam-water natural circulation system is provided for heat exchange and the housing of the heat exchanger has a water-wall type construction. Vertical in-bed heat exchange tubes are provided and the air distributor is water-cooled. A water-cooled dust hopper is provided in the housing to collect particulates from the combustion gases and separate the combustion zone from a volume within said housing in which convection heat exchange tubes are provided to extract heat from the exiting combustion gases.

  20. Applying a Domestic Water-cooled Air-conditioner in Subtropical Cities 

    E-Print Network [OSTI]

    Lee, W.; Chen, H.

    2006-01-01

    fluid. The indoor unit includes a capillary tube and a DX evaporator with copper tubes and aluminium fins. The outdoor unit includes a high performance tube-in-tube water-cooled condenser connected to a hermetic rotary compressor. The cooling tower...

  1. COMPACT THERMAL MODEL FOR THE TRANSIENT TEMPERATURE PREDICTION OF A WATER-COOLED

    E-Print Network [OSTI]

    Daraio, Chiara

    heating application (process indus- try, district heating, etc.). After this, the resulting lower cooled with a heat sink, exploring the concept of hot water cooled electronics as a strategy to reduce as the heat sink outlet water tem- peratures during transient heat loads. The model is validated

  2. Re-Engineering Control Systems using Automatic Generation Tools and Process Simulation: the LHC Water Cooling Case

    E-Print Network [OSTI]

    Booth, W; Bradu, B; Gomez Palacin, L; Quilichini, M; Willeman, D

    2014-01-01

    This paper presents the approach used at CERN (European Organization for Nuclear Research) to perform the re-engineering of the control systems dedicated to the LHC (Large Hadron Collider) water cooling systems.

  3. Passive decay heat removal system for water-cooled nuclear reactors

    DOE Patents [OSTI]

    Forsberg, Charles W. (Oak Ridge, TN)

    1991-01-01

    A passive decay-heat removal system for a water-cooled nuclear reactor employs a closed heat transfer loop having heat-exchanging coils inside an open-topped, insulated box located inside the reactor vessel, below its normal water level, in communication with a condenser located outside of containment and exposed to the atmosphere. The heat transfer loop is located such that the evaporator is in a position where, when the water level drops in the reactor, it will become exposed to steam. Vapor produced in the evaporator passes upward to the condenser above the normal water level. In operation, condensation in the condenser removes heat from the system, and the condensed liquid is returned to the evaporator. The system is disposed such that during normal reactor operations where the water level is at its usual position, very little heat will be removed from the system, but during emergency, low water level conditions, substantial amounts of decay heat will be removed.

  4. A Qualitative Assessment of Thorium-Based Fuels in Supercritical Pressure Water Cooled Reactors

    SciTech Connect (OSTI)

    Weaver, Kevan Dean; Mac Donald, Philip Elsworth

    2002-10-01

    The requirements for the next generation of reactors include better economics and safety, waste minimization (particularly of the long-lived isotopes), and better proliferation resistance (both intrinsic and extrinsic). A supercritical pressure water cooled reactor has been chosen as one of the lead contenders as a Generation IV reactor due to the high thermal efficiency and compact/simplified plant design. In addition, interest in the use of thorium-based fuels for Generation IV reactors has increased based on the abundance of thorium, and the minimization of transuranics in a neutron flux; as plutonium (and thus the minor actinides) is not a by-product in the thorium chain. In order to better understand the possibility of the combination of these concepts to meet the Generation IV goals, the qualitative burnup potential and discharge isotopics of thorium and uranium fuel were studied using pin cell analyses in a supercritical pressure water cooled reactor environment. Each of these fertile materials were used in both nitride and metallic form, with light water reactor grade plutonium and minor actinides added. While the uranium-based fuels achieved burnups that were 1.3 to 2.7 times greater than their thorium-based counterparts, the thorium-based fuels destroyed 2 to 7 times more of the plutonium and minor actinides. The fission-to-capture ratio is much higher in this reactor as compared to PWR’s and BWR’s due to the harder neutron spectrum, thus allowing more efficient destruction of the transuranic elements. However, while the uranium-based fuels do achieve a net depletion of plutonium and minor actinides, the breeding of these isotopes limits this depletion; especially as compared to the thorium-based fuels.

  5. Rotating electrical machines, pt.2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excl. machines for traction vehicles), 1st suppl. Measurement of losses by the calorimetric method

    E-Print Network [OSTI]

    International Electrotechnical Commission. Geneva

    1974-01-01

    Describes methods for measuring the efficiency of electrical rotating machines either by determining total losses on load or by determination of the segregated losses for air and water cooling mediums. Applies to large generators but may be used for other machines.

  6. Comparative Study Between Air-Cooled and Water-Cooled Condensers of the Air-Conditioning Systems 

    E-Print Network [OSTI]

    Maheshwari, G. P.; Mulla Ali, A. A.

    2004-01-01

    The weather in Kuwait is very dry where the dry-bulb temperature exceeds the wet-bulb temperature more than 20oC in most of the summer months. Thus, the air-conditioning (A/C) system with the water-cooled (WC) condensers is expected to perform more...

  7. Prediction of critical heat flux in water-cooled plasma facing components using computational fluid dynamics.

    SciTech Connect (OSTI)

    Bullock, James H.; Youchison, Dennis Lee; Ulrickson, Michael Andrew

    2010-11-01

    Several commercial computational fluid dynamics (CFD) codes now have the capability to analyze Eulerian two-phase flow using the Rohsenow nucleate boiling model. Analysis of boiling due to one-sided heating in plasma facing components (pfcs) is now receiving attention during the design of water-cooled first wall panels for ITER that may encounter heat fluxes as high as 5 MW/m2. Empirical thermalhydraulic design correlations developed for long fission reactor channels are not reliable when applied to pfcs because fully developed flow conditions seldom exist. Star-CCM+ is one of the commercial CFD codes that can model two-phase flows. Like others, it implements the RPI model for nucleate boiling, but it also seamlessly transitions to a volume-of-fluid model for film boiling. By benchmarking the results of our 3d models against recent experiments on critical heat flux for both smooth rectangular channels and hypervapotrons, we determined the six unique input parameters that accurately characterize the boiling physics for ITER flow conditions under a wide range of absorbed heat flux. We can now exploit this capability to predict the onset of critical heat flux in these components. In addition, the results clearly illustrate the production and transport of vapor and its effect on heat transfer in pfcs from nucleate boiling through transition to film boiling. This article describes the boiling physics implemented in CCM+ and compares the computational results to the benchmark experiments carried out independently in the United States and Russia. Temperature distributions agreed to within 10 C for a wide range of heat fluxes from 3 MW/m2 to 10 MW/m2 and flow velocities from 1 m/s to 10 m/s in these devices. Although the analysis is incapable of capturing the stochastic nature of critical heat flux (i.e., time and location may depend on a local materials defect or turbulence phenomenon), it is highly reliable in determining the heat flux where boiling instabilities begin to dominate. Beyond this threshold, higher heat fluxes lead to the boiling crisis and eventual burnout. This predictive capability is essential in determining the critical heat flux margin for the design of complex 3d components.

  8. Feasibility Study of Supercritical Light Water Cooled Reactors for Electrical Power Production, 5th Quarterly Report, October - December 2002

    SciTech Connect (OSTI)

    Philip MacDonald; Jacopo Buongiorno; Cliff Davis; J. Stephen Herring; Kevan Weaver; Ron Latanision; Bryce Mitton; Gary Was; Luca Oriani; Mario Carelli; Dmitry Paramonov; Lawrence Conway

    2003-01-01

    The overall objective of this project is to evaluate the feasibility of supercritical light water cooled reactors for electric power production. The use of light water at supercritical pressures as the coolant in a nuclear reactor offers the potential for considerable plant simplification and consequent capital and O&M cost reduction compared with current light water reactor (LWR) designs. Also, given the thermodynamic conditions of the coolant at the core outlet (i.e. temperature and pressure beyond the water critical point), very high thermal efficiencies for the power conversion cycle are possible (i.e. up to about 45%). Because no change of phase occurs in the core, the need for steam separators and dryers as well as for BWR-type re-circulation pumps is eliminated, which, for a given reactor power, results in a substantially shorter reactor vessel and smaller containment building than the current BWRs. Furthermore, in a direct cycle the steam generators are not needed. If no additional moderator is added to the fuel rod lattice, it is possible to attain fast neutron energy spectrum conditions in a supercritical water-cooled reactor (SCWR). This type of core can make use of either fertile or fertile-free fuel and retain a hard spectrum to effectively burn plutonium and minor actinides from LWR spent fuel while efficiently generating electricity. One can also add moderation and design a thermal spectrum SCWR that can also burn actinides. The project is organized into three tasks:

  9. Ice Storm Supercomputer

    ScienceCinema (OSTI)

    None

    2013-05-28

    "A new Idaho National Laboratory supercomputer is helping scientists create more realistic simulations of nuclear fuel. Dubbed 'Ice Storm,' this 2048-processor machine allows researchers to model and predict the complex physics behind nuclear reactor behavior. And with a new visualization lab, the team can see the results of its simulations on the big screen." For more information about INL research, visit http://www.facebook.com/idahonationallaboratory.

  10. The design and performance of a water cooling system for a prototype coupled cavity linear particle accelerator for the spallation neutron source

    SciTech Connect (OSTI)

    Bernardin, J. D. (John D.); Ammerman, C. N. (Curtt N.); Hopkins, S. M. (Steve M.)

    2002-01-01

    The Spallation Neutron Source (SNS) is a facility being designed for scientific and industrial research and development. The SNS will generate and employ neutrons as a research tool in a variety of disciplines including biology, material science, superconductivity, chemistry, etc. The neutrons will be produced by bombarding a heavy metal target with a high-energy beam of protons, generated and accelerated with a linear particle accelerator, or linac. The low energy end of the linac consists of, in part, a multi-cell copper structure termed a coupled cavity linac (CCL). The CCL is responsible for accelerating the protons from an energy of 87 MeV, to 185 MeV. Acceleration of the charged protons is achieved by the use of large electrical field gradients established within specially designed contoured cavities of the CCL. While a large amount of the electrical energy is used to accelerate the protons, approximately 60-80% of this electrical energy is dissipated in the CCL's copper structure. To maintain an acceptable operating temperature, as well as minimize thermal stresses and maintain desired contours of the accelerator cavities, the electrical waste heat must be removed from the CCL structure. This is done using specially designed water cooling passages within the linac's copper structure. Cooling water is supplied to these cooling passages by a complex water cooling and temperature control system. This paper discusses the design, analysis, and testing of a water cooling system for a prototype CCL. First, the design concept and method of water temperature control is discussed. Second, the layout of the prototype water cooling system, including the selection of plumbing components, instrumentation, as well as controller hardware and software is presented. Next, the development of a numerical network model used to size the pump, heat exchanger, and plumbing equipment, is discussed. Finally, empirical pressure, flow rate, and temperature data from the prototype CCL water cooling tests are used to assess water cooling system performance and numerical modeling accuracy.

  11. IceT users' guide and reference.

    SciTech Connect (OSTI)

    Moreland, Kenneth D.

    2011-01-01

    The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

  12. DESIGN AND ANALYSIS OF THE SNS CCL HOT MODEL WATER COOLING SYSTEM USING THE SINDA/FLUINT NETWORK MODELING TOOL

    SciTech Connect (OSTI)

    C. AMMERMAN; J. BERNARDIN

    1999-11-01

    This report presents results for design and analysis of the hot model water cooling system for the Spallation Neutron Source (SNS) coupled-cavity linac (CCL). The hot model, when completed, will include segments for both the CCL and coupled-cavity drift-tube linac (CCDTL). The scope of this report encompasses the modeling effort for the CCL portion of the hot model. This modeling effort employed the SINDA/FLUINT network modeling tool. This report begins with an introduction of the SNS hot model and network modeling using SINDA/FLUINT. Next, the development and operation of the SINDA/FLUINT model are discussed. Finally, the results of the SINDA/FLUINT modeling effort are presented and discussed.

  13. Iced Coffee Iced Chai Tea Latte

    E-Print Network [OSTI]

    Iced Coffee Iced Chai Tea Latte Iced Americano Iced Cappuccino Iced Latte Iced Mocha Iced White the Cooler Canned Soda Bottled Water Arizona Teas Energy Drinks Red Bull, SF Red Bull & Bing Jones Sodas $0.50 Listed prices do not include applicable sales tax. #12;Brewed Coffee Cafe au Lait Hot Tea Chai Tea Latte

  14. MACHINE CONTEST MACHINE VOLUME WORKSHEET

    E-Print Network [OSTI]

    Giles, C. Lee

    MACHINE CONTEST® MACHINE VOLUME WORKSHEET Note: Each square is 1' x 1' (0.3 m x 0.3 m) (Official the footprint of your machine NOTE: If any part of the machine falls within a square, you must count the entire: _______________ (choose one: ft2 or m2 ) STEP 3: Measure the height of your machine. NOTE: The maximum height is 8' (2.4 m

  15. Interstellar Ices

    E-Print Network [OSTI]

    Boogert, A C A

    2003-01-01

    Currently ~36 different absorption bands have been detected in the infrared spectra of cold, dense interstellar and circumstellar environments. These are attributed to the vibrational transitions of ~17 different molecules frozen on dust grains. We review identification issues and summarize the techniques required to extract information on the physical and chemical evolution of these ices. Both laboratory simulations and line of sight studies are essential. Examples are given for ice bands observed toward high mass protostars, fields stars and recent work on ices in disks surrounding low mass protostars. A number of clear trends have emerged in recent years. One prominent ice component consists of an intimate mixture between H2O, CH3OH and CO2 molecules. Apparently a stable balance exists between low temperature hydrogenation and oxidation reactions on grain surfaces. In contrast, an equally prominent ice component, consisting almost entirely of CO, must have accreted directly from the gas phase. Thermal proc...

  16. Proposal for the Award of a Contract for the Supply of the Hydraulic Links connecting the various Components of the LEP Collider to the demineralized-water cooling circuits

    E-Print Network [OSTI]

    1986-01-01

    Proposal for the Award of a Contract for the Supply of the Hydraulic Links connecting the various Components of the LEP Collider to the demineralized-water cooling circuits

  17. Decommissioning the Romanian Water-Cooled Water-Moderated Research Reactor: New Environmental Perspective on the Management of Radioactive Waste

    SciTech Connect (OSTI)

    Barariu, G.; Giumanca, R. [Romanian Authority for Nuclear Activity (RAAN), Subsidiary of Technology and Engineering for Nuclear Objectives (SITON), 111 Atomistilor St., Bucuresti-Magurele, Ilfov (Romania)

    2006-07-01

    Pre-feasibility and feasibility studies were performed for decommissioning of the water-cooled water-moderated research reactor (WWER) located in Bucharest - Magurele, Romania. Using these studies as a starting point, the preferred safe management strategy for radioactive wastes produced by reactor decommissioning is outlined. The strategy must account for reactor decommissioning, as well as for the rehabilitation of the existing Radioactive Waste Treatment Plant and for the upgrade of the Radioactive Waste Disposal Facility at Baita-Bihor. Furthermore, the final rehabilitation of the laboratories and ecological reconstruction of the grounds need to be provided for, in accordance with national and international regulations. In accordance with IAEA recommendations at the time, the pre-feasibility study proposed three stages of decommissioning. However, since then new ideas have surfaced with regard to decommissioning. Thus, taking into account the current IAEA ideology, the feasibility study proposes that decommissioning of the WWER be done in one stage to an unrestricted clearance level of the reactor building in an Immediate Dismantling option. Different options and the corresponding derived preferred option for waste management are discussed taking into account safety measures, but also considering technical, logistical and economic factors. For this purpose, possible types of waste created during each decommissioning stage are reviewed. An approximate inventory of each type of radioactive waste is presented. The proposed waste management strategy is selected in accordance with the recommended international basic safety standards identified in the previous phase of the project. The existing Radioactive Waste Treatment Plant (RWTP) from the Horia Hulubei Institute for Nuclear Physics and Engineering (IFIN-HH), which has been in service with no significant upgrade since 1974, will need refurbishing due to deterioration, as well as upgrading in order to ensure the plant complies with current safety standards. This plant will also need to be adapted to treat wastes generated by WWER dismantling. The Baita-Bihor National Radioactive Waste Disposal Facility consists of two galleries in an abandoned uranium mine located in the central-western part of the Bihor Mountains in Transylvania. The galleries lie at a depth of 840 m. The facility requires a considerable overhaul. Several steps recommended for the upgrade of the facility are explored. Environmental concerns have lately become a crucial part of the radioactive waste management strategy. As such, all decisions must be made with great regard for land utilization around nuclear objectives. (authors)

  18. : Helmholtz machine estimation .

    E-Print Network [OSTI]

    : Helmholtz machine density estimation . . : . . . (supervised learning) , (active learning) (query learning) [1, 3]. . (unsupervised learning), . , [5]. . Helmholtz machine , . Helmholtz machine : Helmholtz machine [2] . Helmholtz machine (generative network) (recognition network) . , , . Helmholtz machine (self

  19. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

    2012-07-17

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  20. Ground-Coupled Heat Pump Applications and Case Studies 

    E-Print Network [OSTI]

    Braud, H. J.

    1989-01-01

    The paper presents an overview of ground loops for space-conditioning heat pumps, hot water, ice machines, and water-cooled refrigeration in residential and commercial applications. In Louisiana, a chain of hamburger drive-ins uses total ground...

  1. Iced Coffee Iced Yerba Mate "Tea"

    E-Print Network [OSTI]

    Iced Coffee Iced Yerba Mate "Tea" Iced Yerba Mate Latte Iced Chai Tea Latte Original, Green Tea Canned Soda Xing Tea Bottled Water Arizona Teas Energy Drinks Red Bull, SF Red Bull & Bing Jones Sodas $0 Cafe au Lait Hot Tea Yerba Mate "Tea" Yerba Mate Latte Chai Tea Latte - Original, Green Tea, or Sugar

  2. Machine therapy

    E-Print Network [OSTI]

    Dobson, Kelly E. (Kelly Elizabeth), 1970-

    2007-01-01

    Machine Therapy is a new practice combining art, design, psychoanalysis, and engineering work in ways that access and reveal the vital, though often unnoticed, relevance of people's interactions and relationships with ...

  3. Feasibility Study of Supercritical Light Water Cooled Reactors for Electric Power Production, Progress Report for Work Through September 2003, 2nd Annual/8th Quarterly Report

    SciTech Connect (OSTI)

    Philip E. MacDonald

    2003-09-01

    The supercritical water-cooled reactor (SCWR) is one of the six reactor technologies selected for research and development under the Generation-IV program. SCWRs are promising advanced nuclear systems because of their high thermal efficiency (i.e., about 45% vs. about 33% efficiency for current Light Water Reactors, LWRs) and considerable plant simplification. SCWRs are basically LWRs operating at higher pressure and temperatures with a direct once-through cycle. Operation above the critical pressure eliminates coolant boiling, so the coolant remains single-phase throughout the system. Thus the need for recirculation and jet pumps, a pressurizer, steam generators, steam separators and dryers is eliminated. The main mission of the SCWR is generation of low-cost electricity. It is built upon two proven technologies, LWRs, which are the most commonly deployed power generating reactors in the world, and supercritical fossil-fired boilers, a large number of which is also in use around the world.

  4. A Generalized Deletion Machine

    E-Print Network [OSTI]

    Indranil Chakrabarty; Satyabrata Adhikari

    2005-11-22

    In this work we prescribe a more generalized quantum-deleting machine (input state dependent). The fidelity of deletion is dependent on some machine parameters such that on alteration of machine parameters we get back to standard deleting machines. We also carried out a various comparative study of various kinds of quantum deleting machines. We also plotted graphs, making a comparative study of fidelity of deletion of the deletion machines, obtained as particular cases on changing the machine parameters of our machine.

  5. Community Ice Sheet Model (CISM2) Development and Marine Ice...

    Office of Scientific and Technical Information (OSTI)

    Conference: Community Ice Sheet Model (CISM2) Development and Marine Ice Sheet Simulations Citation Details In-Document Search Title: Community Ice Sheet Model (CISM2) Development...

  6. Arctic ice islands

    SciTech Connect (OSTI)

    Sackinger, W.M.; Jeffries, M.O.; Lu, M.C.; Li, F.C.

    1988-01-01

    The development of offshore oil and gas resources in the Arctic waters of Alaska requires offshore structures which successfully resist the lateral forces due to moving, drifting ice. Ice islands are floating, a tabular icebergs, up to 60 meters thick, of solid ice throughout their thickness. The ice islands are thus regarded as the strongest ice features in the Arctic; fixed offshore structures which can directly withstand the impact of ice islands are possible but in some locations may be so expensive as to make oilfield development uneconomic. The resolution of the ice island problem requires two research steps: (1) calculation of the probability of interaction between an ice island and an offshore structure in a given region; and (2) if the probability if sufficiently large, then the study of possible interactions between ice island and structure, to discover mitigative measures to deal with the moving ice island. The ice island research conducted during the 1983-1988 interval, which is summarized in this report, was concerned with the first step. Monte Carlo simulations of ice island generation and movement suggest that ice island lifetimes range from 0 to 70 years, and that 85% of the lifetimes are less then 35 years. The simulation shows a mean value of 18 ice islands present at any time in the Arctic Ocean, with a 90% probability of less than 30 ice islands. At this time, approximately 34 ice islands are known, from observations, to exist in the Arctic Ocean, not including the 10-meter thick class of ice islands. Return interval plots from the simulation show that coastal zones of the Beaufort and Chukchi Seas, already leased for oil development, have ice island recurrences of 10 to 100 years. This implies that the ice island hazard must be considered thoroughly, and appropriate safety measures adopted, when offshore oil production plans are formulated for the Alaskan Arctic offshore. 132 refs., 161 figs., 17 tabs.

  7. Roel Wieringa Machine Intelligence

    E-Print Network [OSTI]

    Wieringa, Roel

    Roel Wieringa Machine Intelligence and Explication Rapport nr.IR-129 VRIJE UNIVERSITEITAMSTERDAM Facultei~ Wiskunde en Informatica, De Boelelaan 1081, 1081 HV Amsterdam #12;Machine Intelligence. Machines and explicitness 1.1 Systems, states, and processes 1.2 Machines, Turing machines, computers 1

  8. Course info Machine Learning

    E-Print Network [OSTI]

    Shi, Qinfeng "Javen"

    Course info Machine Learning Real life problems Lecture 1: Machine Learning Problem Qinfeng (Javen) Shi 28 July 2014 Intro. to Stats. Machine Learning COMP SCI 4401/7401 Qinfeng (Javen) Shi Lecture 1: Machine Learning Problem #12;Course info Machine Learning Real life problems Table of Contents I 1 Course

  9. Arduino Drawing Machine Workshop

    E-Print Network [OSTI]

    Arduino Drawing Machine Workshop and Contest Drawing machines are computer at the event and the Arduino drawing machines will be judged on their overall design.stout@gmail.com) Motivation: Arduino and microcontrollers like it have invigorated students, hobbyists

  10. Ice electrode electrolytic cell

    DOE Patents [OSTI]

    Glenn, D.F.; Suciu, D.F.; Harris, T.L.; Ingram, J.C.

    1993-04-06

    This invention relates to a method and apparatus for removing heavy metals from waste water, soils, or process streams by electrolytic cell means. The method includes cooling a cell cathode to form an ice layer over the cathode and then applying an electric current to deposit a layer of the heavy metal over the ice. The metal is then easily removed after melting the ice. In a second embodiment, the same ice-covered electrode can be employed to form powdered metals.

  11. Ice electrode electrolytic cell

    DOE Patents [OSTI]

    Glenn, David F. (Idaho Falls, ID); Suciu, Dan F. (Idaho Falls, ID); Harris, Taryl L. (Idaho Falls, ID); Ingram, Jani C. (Idaho Falls, ID)

    1993-01-01

    This invention relates to a method and apparatus for removing heavy metals from waste water, soils, or process streams by electrolytic cell means. The method includes cooling a cell cathode to form an ice layer over the cathode and then applying an electric current to deposit a layer of the heavy metal over the ice. The metal is then easily removed after melting the ice. In a second embodiment, the same ice-covered electrode can be employed to form powdered metals.

  12. Celestial Mystery Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Celestial Mystery Machine 1663 Los Alamos science and technology magazine Latest Issue:October 2015 past issues All Issues submit Celestial Mystery Machine High-energy gamma...

  13. Feasibility Study of Supercritical Light Water Cooled Fast Reactors for Actinide Burning and Electric Power Production, Progress Report for Work Through September 2002, 4th Quarterly Report

    SciTech Connect (OSTI)

    Mac Donald, Philip Elsworth

    2002-09-01

    The use of light water at supercritical pressures as the coolant in a nuclear reactor offers the potential for considerable plant simplification and consequent capital and O&M cost reduction compared with current light water reactor (LWR) designs. Also, given the thermodynamic conditions of the coolant at the core outlet (i.e. temperature and pressure beyond the water critical point), very high thermal efficiencies of the power conversion cycle are possible (i.e. up to about 45%). Because no change of phase occurs in the core, the need for steam separators and dryers as well as for BWR-type re-circulation pumps is eliminated, which, for a given reactor power, results in a substantially shorter reactor vessel and smaller containment building than the current BWRs. Furthermore, in a direct cycle the steam generators are not needed. If no additional moderator is added to the fuel rod lattice, it is possible to attain fast neutron energy spectrum conditions in a supercritical water-cooled reactor (SCWR). This type of core can make use of either fertile or fertile-free fuel and retain a hard spectrum to effectively burn plutonium and minor actinides from LWR spent fuel while efficiently generating electricity. One can also add moderation and design a thermal spectrum SCWR. The Generation IV Roadmap effort has identified the thermal spectrum SCWR (followed by the fast spectrum SCWR) as one of the advanced concepts that should be developed for future use. Therefore, the work in this NERI project is addressing both types of SCWRs.

  14. "Hot" for Warm Water Cooling

    SciTech Connect (OSTI)

    IBM Corporation; Energy Efficient HPC Working Group; Hewlett Packard Corporation; SGI; Cray Inc.; Intel Corporation; U.S. Army Engineer Research Development Center; Coles, Henry; Ellsworth, Michael; Martinez, David J.; Bailey, Anna-Maria; Banisadr, Farhad; Bates, Natalie; Coghlan, Susan; Cowley, David E.; Dube, Nicholas; Fields, Parks; Greenberg, Steve; Iyengar, Madhusudan; Kulesza, Peter R.; Loncaric, Josip; McCann, Tim; Pautsch, Greg; Patterson, Michael K.; Rivera, Richard G.; Rottman, Greg K.; Sartor, Dale; Tschudi, William; Vinson, Wade; Wescott, Ralph

    2011-08-26

    Liquid cooling is key to reducing energy consumption for this generation of supercomputers and remains on the roadmap for the foreseeable future. This is because the heat capacity of liquids is orders of magnitude larger than that of air and once heat has been transferred to a liquid, it can be removed from the datacenter efficiently. The transition from air to liquid cooling is an inflection point providing an opportunity to work collectively to set guidelines for facilitating the energy efficiency of liquid-cooled High Performance Computing (HPC) facilities and systems. The vision is to use non-compressor-based cooling, to facilitate heat re-use, and thereby build solutions that are more energy-efficient, less carbon intensive and more cost effective than their air-cooled predecessors. The Energy Efficient HPC Working Group is developing guidelines for warmer liquid-cooling temperatures in order to standardize facility and HPC equipment, and provide more opportunity for reuse of waste heat. This report describes the development of those guidelines.

  15. "Hot" for Warm Water Cooling

    E-Print Network [OSTI]

    Coles, Henry

    2012-01-01

    be removed from the datacenter efficiently. The transitionone half of an air-cooled datacenter's energy consumption isof time if desired by the datacenter owner. If the building

  16. "Hot" for Warm Water Cooling

    E-Print Network [OSTI]

    Coles, Henry

    2012-01-01

    C: DIRECT LIQUID AND AIR COOLING COMPONENT TCASE FORECASTGRAPHICS Direct Liquid Cooling Thermal Components andThermal Design Margins Air Cooling Thermal Components and

  17. "Hot" for Warm Water Cooling

    E-Print Network [OSTI]

    Coles, Henry

    2012-01-01

    3. A plate and frame type heat exchanger is commonly used.use plate and frame type heat exchangers. In some cases the

  18. Air and water cooled modulator

    DOE Patents [OSTI]

    Birx, Daniel L. (Oakley, CA); Arnold, Phillip A. (Livermore, CA); Ball, Don G. (Livermore, CA); Cook, Edward G. (Livermore, CA)

    1995-01-01

    A compact high power magnetic compression apparatus and method for delivering high voltage pulses of short duration at a high repetition rate and high peak power output which does not require the use of environmentally unacceptable fluids such as chlorofluorocarbons either as a dielectric or as a coolant, and which discharges very little waste heat into the surrounding air. A first magnetic switch has cooling channels formed therethrough to facilitate the removal of excess heat. The first magnetic switch is mounted on a printed circuit board. A pulse transformer comprised of a plurality of discrete electrically insulated and magnetically coupled units is also mounted on said printed board and is electrically coupled to the first magnetic switch. The pulse transformer also has cooling means attached thereto for removing heat from the pulse transformer. A second magnetic switch also having cooling means for removing excess heat is electrically coupled to the pulse transformer. Thus, the present invention is able to provide high voltage pulses of short duration at a high repetition rate and high peak power output without the use of environmentally unacceptable fluids and without discharging significant waste heat into the surrounding air.

  19. Air and water cooled modulator

    DOE Patents [OSTI]

    Birx, D.L.; Arnold, P.A.; Ball, D.G.; Cook, E.G.

    1995-09-05

    A compact high power magnetic compression apparatus and method are disclosed for delivering high voltage pulses of short duration at a high repetition rate and high peak power output which does not require the use of environmentally unacceptable fluids such as chlorofluorocarbons either as a dielectric or as a coolant, and which discharges very little waste heat into the surrounding air. A first magnetic switch has cooling channels formed therethrough to facilitate the removal of excess heat. The first magnetic switch is mounted on a printed circuit board. A pulse transformer comprised of a plurality of discrete electrically insulated and magnetically coupled units is also mounted on said printed board and is electrically coupled to the first magnetic switch. The pulse transformer also has cooling means attached thereto for removing heat from the pulse transformer. A second magnetic switch also having cooling means for removing excess heat is electrically coupled to the pulse transformer. Thus, the present invention is able to provide high voltage pulses of short duration at a high repetition rate and high peak power output without the use of environmentally unacceptable fluids and without discharging significant waste heat into the surrounding air. 9 figs.

  20. Water Cooling | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThinWarsaw, Poland: EnergyPage Edit HistoryWastes HazardousWater

  1. Novel Flux Coupling Machine without Permanent Magnets - U Machine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Magnets - U Machine Novel Flux Coupling Machine without Permanent Magnets - U Machine 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer...

  2. Hybrid Quantum Cloning Machine

    E-Print Network [OSTI]

    Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

    2007-06-14

    In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

  3. Global Simulations of Ice nucleation and Ice Supersaturation...

    Office of Scientific and Technical Information (OSTI)

    Article: Global Simulations of Ice nucleation and Ice Supersaturation with an Improved Cloud Scheme in the Community Atmosphere Model Citation Details In-Document Search Title:...

  4. Advanced monitoring of machining operations

    E-Print Network [OSTI]

    Teti, Roberto; Jemielniak, Krzysztof; O'Donnell, Garret; Dornfeld, David

    2010-01-01

    ultra-precision micro-milling machine. 5.2. Chip conditionssensor embedded in the milling machine was investigated (ups with diverse milling machines, toolings, sensor systems

  5. Shop Safety -Machine Shop Hazards, Machine Tool

    E-Print Network [OSTI]

    materials (oily rags, paper,...) away from source of heat. Know where the fire extinguishers are located side if using a file on revolving work. Guard all transmission parts. Use a brush to remove chips ­ Machine Shop Milling Machine (Continued) Guard all transmission parts. Clean up oil spots

  6. DRILLING MACHINES GENERAL INFORMATION

    E-Print Network [OSTI]

    Gellman, Andrew J.

    TC 9-524 Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held power drills to bench mounted and finally floor-mounted models. They can perform operations

  7. Wetland Water Cooling Partnership: The Use of Constructed Wetlands to Enhance Thermoelectric Power Plant Cooling and Mitigate the Demand of Surface Water Use

    SciTech Connect (OSTI)

    Apfelbaum, Steven; Duvall, Kenneth; Nelson, Theresa; Mensing, Douglas; Bengtson, Harlan; Eppich, John; Penhallegon, Clayton; Thompson, Ry

    2013-09-30

    Through the Phase I study segment of contract #DE-NT0006644 with the U.S. Department of Energy’s National Energy Technology Laboratory, Applied Ecological Services, Inc. and Sterling Energy Services, LLC (the AES/SES Team) explored the use of constructed wetlands to help address stresses on surface water and groundwater resources from thermoelectric power plant cooling and makeup water requirements. The project objectives were crafted to explore and develop implementable water conservation and cooling strategies using constructed wetlands (not existing, naturally occurring wetlands), with the goal of determining if this strategy has the potential to reduce surface water and groundwater withdrawals of thermoelectric power plants throughout the country. Our team’s exploratory work has documented what appears to be a significant and practical potential for augmenting power plant cooling water resources for makeup supply at many, but not all, thermoelectric power plant sites. The intent is to help alleviate stress on existing surface water and groundwater resources through harvesting, storing, polishing and beneficially re-using critical water resources. Through literature review, development of conceptual created wetland plans, and STELLA-based modeling, the AES/SES team has developed heat and water balances for conventional thermoelectric power plants to evaluate wetland size requirements, water use, and comparative cooling technology costs. The ecological literature on organism tolerances to heated waters was used to understand the range of ecological outcomes achievable in created wetlands. This study suggests that wetlands and water harvesting can provide a practical and cost-effective strategy to augment cooling waters for thermoelectric power plants in many geographic settings of the United States, particularly east of the 100th meridian, and in coastal and riverine locations. The study concluded that constructed wetlands can have significant positive ancillary socio-economic, ecosystem, and water treatment/polishing benefits when used to complement water resources at thermoelectric power plants. Through the Phase II pilot study segment of the contract, the project team partnered with Progress Energy Florida (now Duke Energy Florida) to quantify the wetland water cooling benefits at their Hines Energy Complex in Bartow, Florida. The project was designed to test the wetland’s ability to cool and cleanse power plant cooling pond water while providing wildlife habitat and water harvesting benefits. Data collected during the monitoring period was used to calibrate a STELLA model developed for the site. It was also used to inform management recommendations for the demonstration site, and to provide guidance on the use of cooling wetlands for other power plants around the country. As a part of the pilot study, Duke Energy is scaling up the demonstration project to a larger, commercial scale wetland instrumented with monitoring equipment. Construction is expected to be finalized in early 2014.

  8. Energy Cost Calculator for Commercial Ice Machines | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n cEnergy (AZ,LocalEfficiency |< Back Eligibility<

  9. Arctic Sea ice model sensitivities.

    SciTech Connect (OSTI)

    Peterson, Kara J.; Bochev, Pavel Blagoveston; Paskaleva, Biliana Stefanova

    2010-12-01

    Arctic sea ice is an important component of the global climate system and, due to feedback effects, the Arctic ice cover is changing rapidly. Predictive mathematical models are of paramount importance for accurate estimates of the future ice trajectory. However, the sea ice components of Global Climate Models (GCMs) vary significantly in their prediction of the future state of Arctic sea ice and have generally underestimated the rate of decline in minimum sea ice extent seen over the past thirty years. One of the contributing factors to this variability is the sensitivity of the sea ice state to internal model parameters. A new sea ice model that holds some promise for improving sea ice predictions incorporates an anisotropic elastic-decohesive rheology and dynamics solved using the material-point method (MPM), which combines Lagrangian particles for advection with a background grid for gradient computations. We evaluate the variability of this MPM sea ice code and compare it with the Los Alamos National Laboratory CICE code for a single year simulation of the Arctic basin using consistent ocean and atmospheric forcing. Sensitivities of ice volume, ice area, ice extent, root mean square (RMS) ice speed, central Arctic ice thickness,and central Arctic ice speed with respect to ten different dynamic and thermodynamic parameters are evaluated both individually and in combination using the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA). We find similar responses for the two codes and some interesting seasonal variability in the strength of the parameters on the solution.

  10. Ice Bear® Storage Module | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ice Bear Storage Module Ice Bear Storage Module Thermal Energy Storage for Light Commercial Refrigerant-Based Air Conditioning Units The Ice Bear storage technology was...

  11. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  12. Quantum Learning Machine

    E-Print Network [OSTI]

    Jeongho Bang; James Lim; M. S. Kim; Jinhyoung Lee

    2008-03-31

    We propose a novel notion of a quantum learning machine for automatically controlling quantum coherence and for developing quantum algorithms. A quantum learning machine can be trained to learn a certain task with no a priori knowledge on its algorithm. As an example, it is demonstrated that the quantum learning machine learns Deutsch's task and finds itself a quantum algorithm, that is different from but equivalent to the original one.

  13. Diamond machine tool face lapping machine

    DOE Patents [OSTI]

    Yetter, H.H.

    1985-05-06

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  14. Stirling machine operating experience

    SciTech Connect (OSTI)

    Ross, B.; Dudenhoefer, J.E.

    1994-09-01

    Numerous Stirling machines have been built and operated, but the operating experience of these machines is not well known. It is important to examine this operating experience in detail, because it largely substantiates the claim that stirling machines are capable of reliable and lengthy operating lives. The amount of data that exists is impressive, considering that many of the machines that have been built are developmental machines intended to show proof of concept, and are not expected to operate for lengthy periods of time. Some Stirling machines (typically free-piston machines) achieve long life through non-contact bearings, while other Stirling machines (typically kinematic) have achieved long operating lives through regular seal and bearing replacements. In addition to engine and system testing, life testing of critical components is also considered. The record in this paper is not complete, due to the reluctance of some organizations to release operational data and because several organizations were not contacted. The authors intend to repeat this assessment in three years, hoping for even greater participation.

  15. On parallel machine scheduling 1

    E-Print Network [OSTI]

    Magdeburg, Universität

    On parallel machine scheduling 1 machines with setup times. The setup has to be performed by a single server. The objective is to minimize even for the case of two identical parallel machines. This paper presents a pseudopolynomial

  16. Universal Developer Platform for MachinePlatform for Machine

    E-Print Network [OSTI]

    1 Universal Developer Platform for MachinePlatform for Machine Control Applications Hansjoerg will need some things: · Senses · Means June 24-26, 2008 ETH Zurich #12;2 And for Machine Control? June 24 ETH Zurich Conclusion: big effort for things that have little to do with Machine Control Multi

  17. Machine Translation for Twitter 

    E-Print Network [OSTI]

    Jehl, Laura Elisabeth

    2010-11-24

    We carried out a study in which we explored the feasibility of machine translation for Twitter for the language pair English and German. As a first step we created a small bilingual corpus of 1,000 tweets. Using this ...

  18. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :' ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' i;:z;zy MEETING REPORT : .I.-.-' Y ::,:I :. &, .I7 ENGINEERING REPORT- : T, ...

  19. Machine For Grinding Fog

    E-Print Network [OSTI]

    Ward, Nicholas Adam

    2010-04-30

    Machine For Grinding Fog, an exhibition of stop motion animated films, revolves around three primary concerns: relationships, psychological or subjective reality, and relativity. Rooted within concerns of faith, personal ethics, and a re...

  20. Design of Vitrification Machine

    E-Print Network [OSTI]

    McDonald, Todd William

    2009-11-30

    and unreliable process. Moreover, there is a lack of standardization in the methods for preparing cells and biological material for the vitrification process. The purpose of the Vitrification Machine is to greatly simplify the process by making it faster, more...

  1. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N.; Chomyszak, Stephen M.

    2005-06-07

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  2. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N. (Providence, RI); Chomyszak, Stephen M. (Attleboro, MA)

    2007-06-05

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  3. Human-machine interactions

    DOE Patents [OSTI]

    Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

    2009-04-28

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  4. Metalworking and machining fluids

    DOE Patents [OSTI]

    Erdemir, Ali (Naperville, IL); Sykora, Frank (Caledon, ON, CA); Dorbeck, Mark (Brighton, MI)

    2010-10-12

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  5. Doubly fed induction machine

    DOE Patents [OSTI]

    Skeist, S. Merrill; Baker, Richard H.

    2005-10-11

    An electro-mechanical energy conversion system coupled between an energy source and an energy load including an energy converter device having a doubly fed induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer coupled to the energy converter device to control the flow of power or energy through the doubly fed induction machine.

  6. Harvesting Machine Census 1999 & 2001

    E-Print Network [OSTI]

    1 Harvesting Machine Census 1999 & 2001 231 Corstorphine Road Edinburgh EH12 7AT www.forestry.gov.uk FCTN001 SUMMARY This Technical Note contains information on the 1999 and 2001 harvesting machine machines, converted forwarders, etc., account for the remaining machines. In the 2001 census, 65

  7. WISKUNNEND WISKE DE MEESTERLIJKE MACHINE

    E-Print Network [OSTI]

    Goelzer, Heiko

    WISKUNNEND WISKE DE MEESTERLIJKE MACHINE ©2013,StandaardUitgeverij,Antwerpen,België Lara werkt studio een machine die pagina's kan sorteren op één van de 5 gecodeerde cijfers: wanneer je de machine bv ingestelde plaats hetzelfde cijfer hebben, dan behoudt de machine hun onderlinge volgorde. a) Help Lara met

  8. Hidden force floating ice

    E-Print Network [OSTI]

    Chang Q. Sun

    2015-01-17

    Because of the segmental specific-heat disparity of the hydrogen bond (O:H-O) and the Coulomb repulsion between oxygen ions, cooling elongates the O:H-O bond at freezing by stretching its containing angle and shortening the H-O bond with an association of larger O:H elongation, which makes ice less dense than water, allowing it to float.

  9. Extreme ultraviolet lithography machine

    DOE Patents [OSTI]

    Tichenor, Daniel A. (Castro Valley, CA); Kubiak, Glenn D. (Livermore, CA); Haney, Steven J. (Tracy, CA); Sweeney, Donald W. (San Ramon, CA)

    2000-01-01

    An extreme ultraviolet lithography (EUVL) machine or system for producing integrated circuit (IC) components, such as transistors, formed on a substrate. The EUVL machine utilizes a laser plasma point source directed via an optical arrangement onto a mask or reticle which is reflected by a multiple mirror system onto the substrate or target. The EUVL machine operates in the 10-14 nm wavelength soft x-ray photon. Basically the EUV machine includes an evacuated source chamber, an evacuated main or project chamber interconnected by a transport tube arrangement, wherein a laser beam is directed into a plasma generator which produces an illumination beam which is directed by optics from the source chamber through the connecting tube, into the projection chamber, and onto the reticle or mask, from which a patterned beam is reflected by optics in a projection optics (PO) box mounted in the main or projection chamber onto the substrate. In one embodiment of a EUVL machine, nine optical components are utilized, with four of the optical components located in the PO box. The main or projection chamber includes vibration isolators for the PO box and a vibration isolator mounting for the substrate, with the main or projection chamber being mounted on a support structure and being isolated.

  10. Blind quantum machine learning

    E-Print Network [OSTI]

    Yu-Bo Sheng; Lan Zhou

    2015-07-26

    Blind quantum machine learning (BQML) enables a classical client with little quantum technology to delegate a remote quantum machine learning to the quantum server in such a approach that the privacy data is preserved. Here we propose the first BQML protocol that the client can classify two-dimensional vectors to different clusters, resorting to a remote small-scale photon quantum computation processor. During the protocol, the client is only required to rotate and measure the single qubit. The protocol is secure without leaking any relevant information to the Eve. Any eavesdropper who attempts to intercept and disturb the learning process can be noticed. In principle, this protocol can be used to classify high dimensional vectors and may provide a new viewpoint and application for quantum machine learning.

  11. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

    1993-03-30

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  12. Climate Impacts of Ice Nucleation

    SciTech Connect (OSTI)

    Gettelman, A.; Liu, Xiaohong; Barahona, Donifan; Lohmann, U.; Chen, Chih-Chieh

    2012-10-27

    Several different ice nucleation parameterizations in two different General Circulation Models are used to understand the effects of ice nucleation on the mean climate state, and the climate effect of aerosol perturbations to ice clouds. The simulations have different ice microphysical states that are consistent with the spread of observations. These different states occur from different parameterizations of the ice cloud nucleation processes, and feature different balances of homogeneous and heterogeneous nucleation. At reasonable efficiencies, consistent with laboratory measurements and constrained by the global radiative balance, black carbon has a small (-0.06 Wm?2) and not statistically significant climate effect. Indirect effects of anthropogenic aerosols on cirrus clouds occur mostly due to increases in homogeneous nucleation fraction as a consequence of anthropogenic sulfur emissions. The resulting ice indirect effects do not seem strongly dependent on the ice micro-physical balance, but are slightly larger for those states with less homogeneous nucleation in the base state. The total ice AIE is estimated at 0.26±0.09 Wm?2 (1? uncertainty). This represents an offset of 20-30% of the simulated total Aerosol Indirect Effect for ice and liquid clouds.

  13. Intersecting vane machines

    DOE Patents [OSTI]

    Bailey, H. Sterling; Chomyszak, Stephen M.

    2007-01-16

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through meshing surfaces without the need for external gearing by modifying the function of one or the other of the rotors from that of "fluid moving" to that of "valving" thereby reducing the pressure loads and associated inefficiencies at the interface of the meshing surfaces. The inventions described herein relate to these improvements.

  14. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, O.T.; Lowry, M.E.

    1999-01-05

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

  15. Precision Robotic Assembly Machine

    ScienceCinema (OSTI)

    None

    2010-09-01

    The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

  16. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, Oliver T. (Castro Valley, CA); Lowry, Mark E. (Castro Valley, CA)

    1999-01-01

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

  17. State machine replication for wide area networks

    E-Print Network [OSTI]

    Mao, Yanhua

    2010-01-01

    state machine . . . . . . . . . . . . . . . . . . 2.4 FLP5.3.3 P: A simple state machine . . . . . . 5.3.4performance metrics of state machine R compared to consensus

  18. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    of Precision Machine Tools Under Varied Cutting Conditions,DA (2008) Improving Machine Tool Interoperability usingenergy monitoring of machine tools A. Vijayaraghavan a , D.

  19. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    in a 3- axis precision milling machine. The simulated pro?lea Mori Seiki NV1500 DCG milling machine by the Machine Tool

  20. ARM - Ice Cores

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments? WeDatastreamstps DocumentationAtlanticENAField ParticipantsField Campaign StatisticsPastIce Cores

  1. Talking Vending Machines

    E-Print Network [OSTI]

    Hacker, Randi

    2011-02-02

    read your demographic and make recommendations based on market research. For a man, the machine will suggest a caffeine drink unless he's over 50 then it's green tea. A woman of 20, will be invited to buy a sweetened drink. Recommendations change...

  2. Pavement Recycling Machine 

    E-Print Network [OSTI]

    Raiford Stripling Associates, Inc.; Stripling, Raiford L.

    2011-08-29

    Detailed field measurements of energy consumption (kWh) and demand (kW) are conducted on two injection molding machines (IMMs) used in a typical plastic manufacturing facility in the San Francisco Bay Area, with/without Variable Frequency Drives...

  3. Operating the Lisp Machine

    E-Print Network [OSTI]

    Moon, David A.

    This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

  4. Laser machining of explosives

    DOE Patents [OSTI]

    Perry, Michael D. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Banks, Paul S. (Livermore, CA); Myers, Booth R. (Livermore, CA); Sefcik, Joseph A. (Tracy, CA)

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  5. MACHINE LEARNING REINFORCEMENT LEARNING

    E-Print Network [OSTI]

    Fleuret, François

    only on the current state. 7 / 54 Policy Example For instance, in the maze, here is a policy (an, etc. 2 / 54 #12;Reinforcement Learning Introduction We have seen two large families of machine case, since we have to explore the environment to collect the samples to learn. 3 / 54 Introduction

  6. Lisp Machine Choice Facilities

    E-Print Network [OSTI]

    Moon, David A.

    This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

  7. Therapeutic Hypothermia: Protective Cooling Using Medical Ice...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Therapeutic Hypothermia: Protective Cooling Using Medical Ice Slurry Technology available for licensing: Proprietary method and equipment for making an ice slurry coolant to induce...

  8. Biogeochemistry in Sea Ice: CICE model developments

    SciTech Connect (OSTI)

    Jeffery, Nicole; Hunke, Elizabeth; Elliott, Scott; Turner, Adrian

    2012-06-18

    Polar primary production unfolds in a dynamic sea ice environment, and the interactions of sea ice with ocean support and mediate this production. In spring, for example, fresh melt water contributes to the shoaling of the mixed layer enhancing ice edge blooms. In contrast, sea ice formation in the fall reduces light penetration to the upper ocean slowing primary production in marine waters. Polar biogeochemical modeling studies typically consider these types of ice-ocean interactions. However, sea ice itself is a biogeochemically active medium, contributing a significant and, possibly, essential source of primary production to polar regions in early spring and fall. Here we present numerical simulations using the Los Alamos Sea Ice Model (CICE) with prognostic salinity and sea ice biogeochemistry. This study investigates the relationship between sea ice multiphase physics and sea ice productivity. Of particular emphasis are the processes of gravity drainage, melt water flushing, and snow loading. During sea ice formation, desalination by gravity drainage facilitates nutrient exchange between ocean and ice maintaining ice algal blooms in early spring. Melt water flushing releases ice algae and nutrients to underlying waters limiting ice production. Finally, snow loading, particularly in the Southern Ocean, forces sea ice below the ocean surface driving an upward flow of nutrient rich water into the ice to the benefit of interior and freeboard communities. Incorporating ice microphysics in CICE has given us an important tool for assessing the importance of these processes for polar algal production at global scales.

  9. Light propagation in the South Pole ice

    SciTech Connect (OSTI)

    Williams, Dawn; Collaboration: IceCube Collaboration

    2014-11-18

    The IceCube Neutrino Observatory is located in the ice near the geographic South Pole. Particle showers from neutrino interactions in the ice produce light which is detected by IceCube modules, and the amount and pattern of deposited light are used to reconstruct the properties of the incident neutrino. Since light is scattered and absorbed by ice between the neutrino interaction vertex and the sensor, IceCube event reconstruction depends on understanding the propagation of light through the ice. This paper presents the current status of modeling light propagation in South Pole ice, including the recent observation of an azimuthal anisotropy in the scattering.

  10. On-machine 3D vision system for machining setup modeling

    E-Print Network [OSTI]

    Zhang, Xi; Tian, Xiaodong; Yamazaki, Kazuo

    2010-01-01

    3 ORIGINAL ARTICLE On-machine 3D vision system for machiningIn computer numerical control machine tools, using machiningIn this paper, an on-machine vision system is presented to

  11. MEAT, POULTRY, Still contains ice

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    MEAT, POULTRY, SEAFOOD Still contains ice crystals and feels as cold, and ground meats Refreeze Discard Poultry and ground poultry Refreeze Discard Variety meats may safely re-freeze foods that s:ll contain ice crystals or that have been

  12. The Fusion Machine (extended abstract)

    E-Print Network [OSTI]

    Gardner, Philippa

    The Fusion Machine (extended abstract) Philippa Gardner Cosimo Laneve Lucian Wischik March 27, 2002. In particular, we describe a dis- tributed abstract machine called the fusion machine. In it, only channels exist at runtime. It uses a form of concurrent constraints called fusions--equations on channel names

  13. Robotics Learning Center Milling Machine Operation Manual

    E-Print Network [OSTI]

    Miller, Damon A.

    Robotics Learning Center Milling Machine Operation Manual Ken Gruel, Dr. Massood Atashbar, RyanMaster.............................................................................................................. 16 6. Milling Machine Operation for the operation of the LPKF® milling machine, and then gives an overview of the physical operation of the machine

  14. Fuzzy Chemical Abstract Machines

    E-Print Network [OSTI]

    Syropoulos, Apostolos

    2009-01-01

    Fuzzy set theory opens new vistas in computability theory and here I show this by defining a new computational metaphor--the fuzzy chemical metaphor. This metaphor is an extension of the chemical metaphor. In particular, I introduce the idea of a state of a system as a solution of fuzzy molecules, that is molecules that are not just different but rather similar, that react according to a set of fuzzy reaction rules. These notions become precise by introducing fuzzy labeled transition systems. Solutions of fuzzy molecules and fuzzy reaction rules are used to define the general notion of a fuzzy chemical abstract machine, which is a {\\em realization} of the fuzzy chemical metaphor. Based on the idea that these machines can be used to describe the operational semantics of process calculi and algebras that include fuzziness as a fundamental property, I present a toy calculus that is a fuzzy equivalent of the $\\pi$-calculus.

  15. Winter Driving Tips Driving in Ice & Snow

    E-Print Network [OSTI]

    Capogna, Luca

    Winter Driving Tips Driving in Ice & Snow: When you must drive, clear the ice and snow from your in ice and snow, other drivers will be traveling cautiously. Don't disrupt the flow of traffic by driving handle better in ice and snow, but they do not have flawless traction, and skids can occur unexpectedly

  16. Machine LearningMachine Learning SrihariSrihari Linear Dynamical Systems

    E-Print Network [OSTI]

    Machine LearningMachine Learning SrihariSrihari Linear Dynamical Systems Sargur N. Srihari srihari@cedar.buffalo.edu Machine Learning Course: http://www.cedar.buffalo.edu/~srihari/CSE574/index.html #12;Machine LearningMachine;Machine LearningMachine Learning SrihariSrihari Motivation · Simple problem in practical settings

  17. Ice thickness measurements by Raman scattering

    E-Print Network [OSTI]

    Pershin, Sergey M; Klinkov, Vladimir K; Yulmetov, Renat N; Bunkin, Alexey F

    2014-01-01

    A compact Raman LIDAR system with a spectrograph was used for express ice thickness measurements. The difference between the Raman spectra of ice and liquid water is employed to locate the ice-water interface while elastic scattering was used for air-ice surface detection. This approach yields an error of only 2 mm for an 80-mm-thick ice sample, indicating that it is promising express noncontact thickness measurements technique in field experiments.

  18. Method of forming calthrate ice

    DOE Patents [OSTI]

    Hino, T.; Gorski, A.J.

    1985-09-30

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultransonically so that small crystals are formed in the liquid. Thes small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  19. Method of forming clathrate ice

    DOE Patents [OSTI]

    Hino, Toshiyuki (Tokyo, JP); Gorski, Anthony J. (Lemont, IL)

    1987-01-01

    A method of forming clathrate ice in a supercooled water-based liquid contained in a vessel is disclosed. Initially, an oscillator device is located in the liquid in the vessel. The oscillator device is then oscillated ultrasonically so that small crystals are formed in the liquid. These small crystals serve as seed crystals for ice formation in the liquid and thereby prevent supercooling of the liquid. Preferably, the oscillating device is controlled by a thermostat which initiates operation of the oscillator device when the temperature of the liquid is lowered to the freezing point. Thereafter, the operation of the oscillator device is terminated when ice is sensed in the liquid by an ice sensor.

  20. An experimental and theoretical study of the ice accretion process during artificial and natural icing conditions

    E-Print Network [OSTI]

    Kirby, Mark Samuel

    1986-01-01

    Real-time measurements of ice growth during artificial and natural icing conditions were conducted using an ultrasonic pulse-echo technique. This technique allows ice thickness to be measured with an accuracy of ?0.5 mm; ...

  1. Feasibility Study of Supercritical Light Water Cooled Reactors for Electric Power Production, Nuclear Energy Research Initiative Project 2001-001, Westinghouse Electric Co. Grant Number: DE-FG07-02SF22533, Final Report

    SciTech Connect (OSTI)

    Philip E. MacDonald

    2005-01-01

    The supercritical water-cooled reactor (SCWR) is one of the six reactor technologies selected for research and development under the Generation IV program. SCWRs are promising advanced nuclear systems because of their high thermal efficiency (i.e., about 45% versus about 33% efficiency for current Light Water Reactors [LWRs]) and considerable plant simplification. SCWRs are basically LWRs operating at higher pressure and temperatures with a direct once-through cycle. Operation above the critical pressure eliminates coolant boiling, so the coolant remains single-phase throughout the system. Thus, the need for a pressurizer, steam generators, steam separators, and dryers is eliminated. The main mission of the SCWR is generation of low-cost electricity. It is built upon two proven technologies: LWRs, which are the most commonly deployed power generating reactors in the world, and supercritical fossil-fired boilers, a large number of which are also in use around the world. The reference SCWR design for the U.S. program is a direct cycle system operating at 25.0 MPa, with core inlet and outlet temperatures of 280 and 500 C, respectively. The coolant density decreases from about 760 kg/m3 at the core inlet to about 90 kg/m3 at the core outlet. The inlet flow splits with about 10% of the inlet flow going down the space between the core barrel and the reactor pressure vessel (the downcomer) and about 90% of the inlet flow going to the plenum at the top of the rector pressure vessel, to then flow down through the core in special water rods to the inlet plenum. Here it mixes with the feedwater from the downcomer and flows upward to remove the heat in the fuel channels. This strategy is employed to provide good moderation at the top of the core. The coolant is heated to about 500 C and delivered to the turbine. The purpose of this NERI project was to assess the reference U.S. Generation IV SCWR design and explore alternatives to determine feasibility. The project was organized into three tasks: Task 1. Fuel-cycle Neutronic Analysis and Reactor Core Design Task 2. Fuel Cladding and Structural Material Corrosion and Stress Corrosion Cracking Task 3. Plant Engineering and Reactor Safety Analysis. moderator rods. materials.

  2. Robust Minimax Probability Machine Regression Robust Minimax Probability Machine Regression

    E-Print Network [OSTI]

    Grudic, Greg

    Robust Minimax Probability Machine Regression Robust Minimax Probability Machine Regression Thomas of Computer Science University of Colorado Boulder, C0 80309-0430, USA Abstract We formulate regression as maximizing the minimum probability () that the regression model is within ± of all future observations (i

  3. Lean Green Skating Machine Report No. 1

    E-Print Network [OSTI]

    Levi, Anthony F. J.

    and trying it for him/herself. The Lean Green Skating Machine is designed to help skaters recognize when Machine Report No. 1 Summary This report includes the details and design of the Lean Green Skating MachineLean Green Skating Machine Report No. 1 Lean Green Skating Machine Report No. 1 Submitted by Simon

  4. Vapor deposition of water on graphitic surfaces: Formation of amorphous ice, bilayer ice, ice I, and liquid water

    SciTech Connect (OSTI)

    Lupi, Laura; Kastelowitz, Noah; Molinero, Valeria

    2014-11-14

    Carbonaceous surfaces are a major source of atmospheric particles and could play an important role in the formation of ice. Here we investigate through molecular simulations the stability, metastability, and molecular pathways of deposition of amorphous ice, bilayer ice, and ice I from water vapor on graphitic and atomless Lennard-Jones surfaces as a function of temperature. We find that bilayer ice is the most stable ice polymorph for small cluster sizes, nevertheless it can grow metastable well above its region of thermodynamic stability. In agreement with experiments, the simulations predict that on increasing temperature the outcome of water deposition is amorphous ice, bilayer ice, ice I, and liquid water. The deposition nucleation of bilayer ice and ice I is preceded by the formation of small liquid clusters, which have two wetting states: bilayer pancake-like (wetting) at small cluster size and droplet-like (non-wetting) at larger cluster size. The wetting state of liquid clusters determines which ice polymorph is nucleated: bilayer ice nucleates from wetting bilayer liquid clusters and ice I from non-wetting liquid clusters. The maximum temperature for nucleation of bilayer ice on flat surfaces, T{sub B}{sup max} is given by the maximum temperature for which liquid water clusters reach the equilibrium melting line of bilayer ice as wetting bilayer clusters. Increasing water-surface attraction stabilizes the pancake-like wetting state of liquid clusters leading to larger T{sub B}{sup max} for the flat non-hydrogen bonding surfaces of this study. The findings of this study should be of relevance for the understanding of ice formation by deposition mode on carbonaceous atmospheric particles, including soot.

  5. Materialization of Universal Turing Machines

    E-Print Network [OSTI]

    Forum Paderborn, Germany #12;Contents Alan Turing's relation to Germany Turing Machines Hasenjaeger was -- unknowingly -- Alan Turing's one-man counterpart for the security of the ENIGMA on the German side #12;Alan Turing: His time ahead 1936: Defines a programmable Machine and solves the Entscheidungsproblem (On

  6. Electrothermal Icing Protection of Aerosurfaces Using Conductive Polymer Nanocomposites

    E-Print Network [OSTI]

    Buschhorn, Samuel T.

    Ice protection systems (IPS) are critical components for many aerospace flight vehicles, including commercial transports and unmanned aerial systems (UAS), and can include anti-icing, de-icing, ice sensing, etc. Here, an ...

  7. Coherent radar ice thickness measurements over the Greenland ice sheet

    E-Print Network [OSTI]

    Gogineni, S. Prasad; Tammana, Dilip; Braaten, David A.; Leuschen, C.; Legarsky, J.; Kanagaratnam, P.; Stiles, J.; Allen, C.; Jezek, K.; Akins, T. L.

    2001-12-27

    averaged over a distance covered by aircraft in 1 s (-130 m).) tt(X, g = -d) = Sice(t: T, x). (6) The value t = - can be interpreted as the time when S ice(t, x) represents the wave energy due to scattering specifically from depth d, as opposed... of the Greenland ice sheet produced by Mark Fahnestock (Department of Meteorology, University of Maryland, College Park) and Ron Kwok (Jet Propulsion Laboratory, California Institute of Technology, Pasa- dena). The helpful suggestions and comments of two...

  8. MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE

    E-Print Network [OSTI]

    Church, George M.

    MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE FOR BIOLOGICAL INSPIRED ENGINEERING JUNE 2014 _____________________________________________ 7 4.0 GENERAL MACHINE SHOP RULES ________________________________________ 8 4.1 CLEANLINESS _________________________________________________ 13 7.0 MACHINERY/MACHINE GUARDING ______________________________________ 14 7.1 GUIDELINES

  9. Environmental constituents of Electrical Discharge Machining

    E-Print Network [OSTI]

    Cho, Margaret H. (Margaret Hyunjoo), 1982-

    2004-01-01

    Electrical Discharge Machining (EDM) is a non-traditional process that uses no mechanical forces to machine metals. It is extremely useful in machining hard materials. With the advantages EDM has to offer and its presence ...

  10. Rubber friction on ice and snow surfaces 

    E-Print Network [OSTI]

    Skouvaklis, Gerasimos

    2011-06-28

    The friction of rubber on ice and snow surfaces is complex. Deeper scientific understanding is important for optimising performance of tyres in winter. Rubber, ice and snow systems exhibit frictional behaviour which ...

  11. Heavy ion irradiation of crystalline water ice

    E-Print Network [OSTI]

    Dartois, E; Boduch, P; Brunetto, R; Chabot, M; Domaracka, A; Ding, J J; Kamalou, O; Lv, X Y; Rothard, H; da Silveira, E F; Thomas, J C

    2015-01-01

    Under cosmic irradiation, the interstellar water ice mantles evolve towards a compact amorphous state. Crystalline ice amorphisation was previously monitored mainly in the keV to hundreds of keV ion energies. We experimentally investigate heavy ion irradiation amorphisation of crystalline ice, at high energies closer to true cosmic rays, and explore the water-ice sputtering yield. We irradiated thin crystalline ice films with MeV to GeV swift ion beams, produced at the GANIL accelerator. The ice infrared spectral evolution as a function of fluence is monitored with in-situ infrared spectroscopy (induced amorphisation of the initial crystalline state into a compact amorphous phase). The crystalline ice amorphisation cross-section is measured in the high electronic stopping-power range for different temperatures. At large fluence, the ice sputtering is measured on the infrared spectra, and the fitted sputtering-yield dependence, combined with previous measurements, is quadratic over three decades of electronic ...

  12. Thermal Storage with Ice Harvesting Systems 

    E-Print Network [OSTI]

    Knebel, D. E.

    1986-01-01

    Application of Harvesting Ice Storage Systems. Thermal storage systems are becoming widely accepted techniques for utility load management. This paper discusses the principles of ice harvesting equipment and their application to the multi...

  13. The convective desalination of sea ice

    E-Print Network [OSTI]

    Rees Jones, David

    2014-07-01

    in the interstices of an ice matrix. My focus is on one of the processes by which the salt content of sea ice decreases, namely convective desalination, which is also often called gravity drainage by geophysicists. Modelling convective desalination requires...

  14. Electrical properties of saline ices and ice-silicate mixtures: geophysical and astrobiological consequences (Invited)

    E-Print Network [OSTI]

    Stillman, David E.

    MR22A-05 Electrical properties of saline ices and ice-silicate mixtures: geophysical) electrical-properties measurements of laboratory- produced saline ice, salt hydrates, and ice of interior properties, and habitability. The electrical properties of saline H2O are controlled by the binary

  15. Hilbert's machine and w-order

    E-Print Network [OSTI]

    Antonio Leon

    2009-11-23

    Hilbert's machine is a supertask machine inspired by Hilbert's Hotel whose functioning leads to a contradictory result involving w-ordering.

  16. Funding Opportunity: Next Generation Electric Machines: Megawatt...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Funding Opportunity: Next Generation Electric Machines: Megawatt Class Motors Funding Opportunity: Next Generation Electric Machines: Megawatt Class Motors March 19, 2015 - 4:45pm...

  17. Covered Product Category: Refrigerated Beverage Vending Machines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    beverage vending machines are the General Services Administration (GSA) and Defense Logistics Agency (DLA). GSA sells refrigerated beverage vending machines through its...

  18. HUMAN MACHINE COOPERATIVE TELEROBOTICS

    SciTech Connect (OSTI)

    William R. Hamel; Spivey Douglass; Sewoong Kim; Pamela Murray; Yang Shou; Sriram Sridharan; Ge Zhang; Scott Thayer; Rajiv V. Dubey

    2003-06-30

    The remediation and deactivation and decommissioning (D&D) of nuclear waste storage tanks using telerobotics is one of the most challenging tasks faced in environmental cleanup. Since a number of tanks have reached the end of their design life and some of them have leaks, the unstructured, uncertain and radioactive environment makes the work inefficient and expensive. However, the execution time of teleoperation consumes ten to hundred times that of direct contact with an associated loss in quality. Thus, a considerable effort has been expended to improve the quality and efficiency of telerobotics by incorporating into teleoperation and robotic control functions such as planning, trajectory generation, vision, and 3-D modeling. One example is the Robot Task Space Analyzer (RTSA), which has been developed at the Robotics and Electromechanical Systems Laboratory (REMSL) at the University of Tennessee in support of the D&D robotic work at the Oak Ridge National Laboratory and the National Energy Technology Laboratory. This system builds 3-D models of the area of interest in task space through automatic image processing and/or human interactive manual modeling. The RTSA generates a task plan file, which describes the execution of a task including manipulator and tooling motions. The high level controller of the manipulator interprets the task plan file and executes the task automatically. Thus, if the environment is not highly unstructured, a tooling task, which interacts with environment, will be executed in the autonomous mode. Therefore, the RTSA not only increases the system efficiency, but also improves the system reliability because the operator will act as backstop for safe operation after the 3-D models and task plan files are generated. However, unstructured conditions of environment and tasks necessitate that the telerobot operates in the teleoperation mode for successful execution of task. The inefficiency in the teleoperation mode led to the research described as Human Machine Cooperative Telerobotics (HMCTR). The HMCTR combines the telerobot with robotic control techniques to improve the system efficiency and reliability in teleoperation mode. In this topical report, the control strategy, configuration and experimental results of Human Machines Cooperative Telerobotics (HMCTR), which modifies and limits the commands of human operator to follow the predefined constraints in the teleoperation mode, is described. The current implementation is a laboratory-scale system that will be incorporated into an engineering-scale system at the Oak Ridge National Laboratory in the future.

  19. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  20. Medical ice slurry production device

    DOE Patents [OSTI]

    Kasza, Kenneth E. (Palos Park, IL); Oras, John (Des Plaines, IL); Son, HyunJin (Naperville, IL)

    2008-06-24

    The present invention relates to an apparatus for producing sterile ice slurries for medical cooling applications. The apparatus is capable of producing highly loaded slurries suitable for delivery to targeted internal organs of a patient, such as the brain, heart, lungs, stomach, kidneys, pancreas, and others, through medical size diameter tubing. The ice slurry production apparatus includes a slurry production reservoir adapted to contain a volume of a saline solution. A flexible membrane crystallization surface is provided within the slurry production reservoir. The crystallization surface is chilled to a temperature below a freezing point of the saline solution within the reservoir such that ice particles form on the crystallization surface. A deflector in the form of a reciprocating member is provided for periodically distorting the crystallization surface and dislodging the ice particles which form on the crystallization surface. Using reservoir mixing the slurry is conditioned for easy pumping directly out of the production reservoir via medical tubing or delivery through other means such as squeeze bottles, squeeze bags, hypodermic syringes, manual hand delivery, and the like.

  1. Development of Electrochemical Micro Machining 

    E-Print Network [OSTI]

    Srinivas Sundarram, Sriharsha

    2008-10-10

    The machining of materials on micrometer and sub-micrometer scale is considered the technology of the future. The current techniques for micro manufacturing mostly are silicon based. These manufacturing techniques are ...

  2. Time Machine at the LHC

    E-Print Network [OSTI]

    I. Ya. Aref'eva; I. V. Volovich

    2007-10-25

    Recently, black hole and brane production at CERN's Large Hadron Collider (LHC) has been widely discussed. We suggest that there is a possibility to test causality at the LHC. We argue that if the scale of quantum gravity is of the order of few TeVs, proton-proton collisions at the LHC could lead to the formation of time machines (spacetime regions with closed timelike curves) which violate causality. One model for the time machine is a traversable wormhole. We argue that the traversable wormhole production cross section at the LHC is of the same order as the cross section for the black hole production. Traversable wormholes assume violation of the null energy condition (NEC) and an exotic matter similar to the dark energy is required. Decay of the wormholes/time machines and signatures of time machine events at the LHC are discussed.

  3. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  4. Metal-mediated molecular machines 

    E-Print Network [OSTI]

    Howgego, David Christopher

    2013-06-29

    Nature abounds with ingenious nanoscopic machines employed to carry out all of the requisite tasks that collectively contribute to the molecular basis of life. This thesis focuses primarily on a sub-set known as "molecular ...

  5. Simulation of Synchronous Machines This chapter covers

    E-Print Network [OSTI]

    McCalley, James D.

    1 Simulation of Synchronous Machines This chapter covers: (A) Sections 5.25.7: Determination of initial conditions (B) Section 5.8: Determination of machine parameters from manufacturers' data.3: Machine connected to an infinite bus through a line · Section 5.4: Machine connected

  6. Bedmap2: improved ice bed, surface and thickness datasets for Antarctica

    E-Print Network [OSTI]

    2013-01-01

    Surface configuration, ice thick- ness, volume and bedrockconstruction of the ice thick- ness grids. between flightof the physical ice thick- ness, rather than an “ice-

  7. Hydrogen ICE Vehicle Testing Activities

    SciTech Connect (OSTI)

    J. Francfort; D. Karner

    2006-04-01

    The Advanced Vehicle Testing Activity teamed with Electric Transportation Applications and Arizona Public Service to develop and monitor the operations of the APS Alternative Fuel (Hydrogen) Pilot Plant. The Pilot Plant provides 100% hydrogen, and hydrogen and compressed natural gas (H/CNG)-blended fuels for the evaluation of hydrogen and H/CNG internal combustion engine (ICE) vehicles in controlled and fleet testing environments. Since June 2002, twenty hydrogen and H/CNG vehicles have accumulated 300,000 test miles and 5,700 fueling events. The AVTA is part of the Department of Energy’s FreedomCAR and Vehicle Technologies Program. These testing activities are managed by the Idaho National Laboratory. This paper discusses the Pilot Plant design and monitoring, and hydrogen ICE vehicle testing methods and results.

  8. FAFCO Ice Storage test report

    SciTech Connect (OSTI)

    Stovall, T.K.

    1993-11-01

    The Ice Storage Test Facility (ISTF) is designed to test commercial ice storage systems. FAFCO provided a storage tank equipped with coils designed for use with a secondary fluid system. The FAFCO ice storage system was tested over a wide range of operating conditions. Measured system performance during charging showed the ability to freeze the tank fully, storing from 150 to 200 ton-h. However, the charging rate showed significant variations during the latter portion of the charge cycle. During discharge cycles, the storage tank outlet temperature was strongly affected by the discharge rate and tank state of charge. The discharge capacity was dependent upon both the selected discharge rate and maximum allowable tank outlet temperature. Based on these tests, storage tank selection must depend on both charge and discharge conditions. This report describes FAFCO system performance fully under both charging and discharging conditions. While the test results reported here are accurate for the prototype 1990 FAFCO Model 200, currently available FAFCO models incorporate significant design enhancements beyond the Model 200. At least one major modification was instituted as a direct result of the ISTF tests. Such design improvements were one of EPRI`s primary goals in founding the ISTF.

  9. Geol 795 Paleoceanography Ice Sheet Dynamics and Climate Change

    E-Print Network [OSTI]

    Barranco, Joseph

    Geol 795 ­ Paleoceanography Ice Sheet Dynamics and Climate Change Class Meetings: Tuesday 9 of articles related ice sheet dynamics and the role of ice sheets in past, present, and future climate change ice sheet dynamics and the role of ice sheets in climate change. We will discuss effective ways

  10. Minimal universal quantum heat machine

    E-Print Network [OSTI]

    David Gelbwaser-Klimovsky; Robert Alicki; Gershon Kurizki

    2013-01-29

    In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally-separated heat baths at different temperatures. The equation of motion allows to compute the stationary power and heat currents in the machine consistently with the second-law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

  11. Cooling system for rotating machine

    DOE Patents [OSTI]

    Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

    2011-08-09

    An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

  12. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  13. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  14. In situ cosmogenic radiocarbon production and 2-D ice flow line modeling for an Antarctic blue ice area

    E-Print Network [OSTI]

    Severinghaus, Jeffrey P.

    In situ cosmogenic radiocarbon production and 2-D ice flow line modeling for an Antarctic blue ice; accepted 12 April 2012; published 24 May 2012. [1] Radiocarbon measurements at ice margin sites and blue and 2-D ice flow line modeling for an Antarctic blue ice area, J. Geophys. Res., 117, F02029, doi:10

  15. BISICLES Captures Details of Retreating Antarctic Ice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    software framework, and linked them to the existing Community Ice Sheet Model code (CISM). With AMR, researchers can now model dynamic points of interest at extremely high...

  16. The Next ICE Age | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications The Next ICE Age Fuel Modification t Facilitate Future Combustion Regimes? Optimization of Advanced Diesel Engine Combustion Strategies...

  17. The Stability of the Greenland Ice Sheet

    E-Print Network [OSTI]

    Biasutti, Michela

    , distribution and seasonality · Solid Earth: · Geothermal heatflux Abrupt Climate Change Studies Symposium 21 Rebound (GIA) GPS stations measure vertical deformation of solid Earth as ice

  18. Relationships between Water Wettability and Ice Adhesion

    E-Print Network [OSTI]

    Meuler, Adam J.

    Ice formation and accretion may hinder the operation of many systems critical to national infrastructure, including airplanes, power lines, windmills, ships, and telecommunications equipment. Yet despite the pervasiveness ...

  19. Viscosity of interfacial water regulates ice nucleation

    SciTech Connect (OSTI)

    Li, Kaiyong; Chen, Jing; Zhang, Qiaolan; Zhang, Yifan; University of Chinese Academy of Sciences, Beijing 100049 ; Xu, Shun; Zhou, Xin; Cui, Dapeng; Wang, Jianjun Song, Yanlin

    2014-03-10

    Ice formation on solid surfaces is an important phenomenon in many fields, such as cloud formation and atmospheric icing, and a key factor for applications in preventing freezing. Here, we report temperature-dependent nucleation rates of ice for hydrophilic and hydrophobic surfaces. The results show that hydrophilic surface presents a lower ice nucleation rate. We develop a strategy to extract the thermodynamic parameters, J{sub 0} and ?, in the context of classical nucleation theory. From the extracted J{sub 0} and ?, we reveal the dominant role played by interfacial water. The results provide an insight into freezing mechanism on solid surfaces.

  20. Mathematics Of Ice To Aid Global Warming Forecasts Mathematics Of Ice To Aid Global Warming Forecasts

    E-Print Network [OSTI]

    Golden, Kenneth M.

    Mathematics Of Ice To Aid Global Warming Forecasts Mathematics Of Ice To Aid Global Warming forecasts of how global warming will affect polar icepacks. See also: Earth & Climate q Global Warming q the effects of climate warming, and its presence greatly reduces solar heating of the polar oceans." "Sea ice

  1. Relationship between ice water content and equivalent radar reflectivity for clouds consisting of nonspherical ice particles

    E-Print Network [OSTI]

    Baum, Bryan A.

    Relationship between ice water content and equivalent radar reflectivity for clouds consisting investigates the relationship between ice water content (IWC) and equivalent radar reflectivity (Ze) at 94 GHz. Baum, and A. J. Heymsfield (2008), Relationship between ice water content and equivalent radar

  2. A New Approach for Exploring Ice Sheets and Sub-Ice Geology

    E-Print Network [OSTI]

    Kristoffersen, Yngve

    A New Approach for Exploring Ice Sheets and Sub-Ice Geology Active seismic measurements were geology driven by ice flow [Smith et al., 2007] and the long record of seismic exploration of subglacial sur- veys because of the considerable logistical effort necessary for seismic data acquisition

  3. Satellite SAR Remote Sensing of Great Lakes Ice Cover, Part 2. Ice Classification and Mapping

    E-Print Network [OSTI]

    (look-up table) for different ice types. The library is used in the computer classifica- tion (freshwater) ice types using the Jet Propulsion Laboratory C-band scatterometer, together with surface data set, composed of over 20 variations of different ice types measured at incident angles from 0

  4. Improving Machine Tool Interoperability Using Standardized Interface Protocols: MT Connect

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Sobel, Will; Fox, Armando; Dornfeld, David; Warndorf, Paul

    2008-01-01

    23-26, 2008 IMPROVING MACHINE TOOL INTEROPERABILITY USINGMTConnect TM data from a machine tool for process planningpotential of improved machine-tool interoperability through

  5. Parallel machine match-up scheduling with manufacturing cost considerations

    E-Print Network [OSTI]

    Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

    2010-01-01

    approach for the single machine scheduling problem. Journaldecisions on parallel CNC machines: -constraint approach.mechanism for the CNC machine scheduling problems with

  6. Machine Learning for Humanoid Robot Modeling and Control /

    E-Print Network [OSTI]

    Wu, Tingfan

    2013-01-01

    Face . . . . . . . . . . . 1.2 Machine Learning ApproachesInternational Conference on Machine Learning (ICML), 2011. [hands. ICRA 2013, 2013. [40] Machine Perception Laboratory.

  7. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01

    Power Demand of Precision Machine Tools, MS Thesis, Dept.Environmental Burden for Machine Tool Operation, JSME Int.of Downsized Design for Machine Tools on the Environmental

  8. Design and Operation Strategies for Green Machine Tool Development

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Dornfeld, David

    2010-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inof four types of milling machines varying in automation asof downsizing a CNC milling machine tool on its energy and

  9. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inconsumption analysis of milling machine tools are firstof four types of milling machines Proceedings of 4th CIRP

  10. ARKTOS: An intelligent system for SAR sea ice image classification

    E-Print Network [OSTI]

    Soh, L. K.; Tsatsoulis, Costas; Gineris, D.; Bertoia, C.

    2004-01-01

    We present an intelligent system for satellite sea ice image analysis named Advanced Reasoning using Knowledge for T ping Of Sea ice (ARKTOS). ARKTOS performs fully automated analysis of synthetic aperture radar (SAR) sea ice images by mimicking...

  11. Description of the Scenario Machine

    E-Print Network [OSTI]

    V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

    2007-09-26

    We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

  12. Factory capacity limits Machine dependencies

    E-Print Network [OSTI]

    Foley, Simon

    Factory capacity limits Machine dependencies Employee scheduling Raw material availability Other internal operations (and also possibly the actions of other suppliers that supply raw materials) and at an international workshop at the multi-agent conference (AAMAS'06). Manufacturer Customer demand Penalties for non

  13. Designing a parallel simula machine

    SciTech Connect (OSTI)

    Papazoglou, M.P.; Georgiadis, P.I.; Maritsas, D.G.

    1983-10-01

    The parallel simula machine (PSM) architecture is based upon a master/slave topology, incorporating a master microprocessor. Interconnection circuitry between the master and slave processor modules uses a timesharing system bus and various programmable interrupt control units. Common and private memory modules reside in the PSM, and direct memory access transfers ease the master processor's workload. 5 references.

  14. A direct evidence of vibrationally delocalized response at ice surface

    SciTech Connect (OSTI)

    Ishiyama, Tatsuya; Morita, Akihiro

    2014-11-14

    Surface-specific vibrational spectroscopic responses at isotope diluted ice and amorphous ice are investigated by molecular dynamics (MD) simulations combined with quantum mechanics/molecular mechanics calculations. The intense response specific to the ordinary crystal ice surface is predicted to be significantly suppressed in the isotopically diluted and amorphous ices, demonstrating the vibrational delocalization at the ordinary ice surface. The collective vibration at the ice surface is also analyzed with varying temperature by the MD simulation.

  15. Auditing Technology for Electronic Voting Machines

    E-Print Network [OSTI]

    Cohen, Sharon B.

    2005-05-19

    Direct Recording Electronic (DRE) voting machine security has been a significant topic of contention ever since Diebold voting machine code turned up on a public internet site in 2003 and computer scientists at Johns Hopkins ...

  16. Auditing technology for electronic voting machines

    E-Print Network [OSTI]

    Cohen, Sharon B

    2005-01-01

    Direct Recording Electronic (DRE) voting machine security has been a significant topic of contention ever since Diebold voting machine code turned up on a public Internet site in 2003 and computer scientists at Johns Hopkins ...

  17. Integrated Inverter For Driving Multiple Electric Machines

    DOE Patents [OSTI]

    Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

    2006-04-04

    An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

  18. The timely self-portrait machine

    E-Print Network [OSTI]

    Haun, Gregory Cosmo

    1992-01-01

    This thesis explores the philosophy which underlies the Timely Self-Portrait Machine. The cultural history of the machine, the phenomenon of Television, and the personal history of this project are discussed. Technical ...

  19. Energy Conservation Within the Paper Machine Room 

    E-Print Network [OSTI]

    Walker, P. J.; Erskine, K. J.

    1979-01-01

    their startling waste of energy, the corrective measures taken to reduce this waste of energy, the potential for waste recovery and equipment available for waste heat recovery. Areas under study include the press section, paper machine dryer section, and machine...

  20. ARM - TWP-ICE Maps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow, AlaskaManus Site-Inactive TWP Related Links Facilities andTWP-ICE Maps

  1. IceCube at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.FoodHydropower,Principal InvestigatorsIceCube at

  2. Results from IceCube/IceTop Ooty, 17/12/12 Tom Gaisser for the IceCube Collab. 1

    E-Print Network [OSTI]

    Gaisser, Thomas K.

    , 17/12/12 Tom Gaisser for the IceCube Collab. 3 #12;Mumbai, 11/12/12 Tom;Mumbai, 11/12/12 Tom Gaisser for the IceCube Collab. 5 DetecMng neutrinos in H of interac,ons IceTop #12;Mumbai, 11/12/12 Tom Gaisser for the IceCube Collab. 6

  3. Final Report "LAB-SCALE SNOWMAKING MACHINE"

    E-Print Network [OSTI]

    with the future operation of this snow machine and the continued success of the Smart Bridge project. Sincerely

  4. Permutation parity machines for neural cryptography

    SciTech Connect (OSTI)

    Reyes, Oscar Mauricio; Zimmermann, Karl-Heinz

    2010-06-15

    Recently, synchronization was proved for permutation parity machines, multilayer feed-forward neural networks proposed as a binary variant of the tree parity machines. This ability was already used in the case of tree parity machines to introduce a key-exchange protocol. In this paper, a protocol based on permutation parity machines is proposed and its performance against common attacks (simple, geometric, majority and genetic) is studied.

  5. Radar attenuation and temperature within the Greenland Ice Sheet

    E-Print Network [OSTI]

    2015-01-01

    on obliquely propagating radio waves, IEEE Trans. Geosci.dielectric attenuation of radio waves through ice is alsoattenuation of radio waves through ice is also temperature

  6. ICR-ICE Standard Operating Procedures (Update Sept 2013) | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ICR-ICE Standard Operating Procedures (Update Sept 2013) ICR-ICE Standard Operating Procedures (Update Sept 2013) ICRICE SOPSep 2013Final.pdf More Documents & Publications...

  7. Rapid development of an ice sheet climate application using the...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Rapid development of an ice sheet climate application using the components-based approach Citation Details In-Document Search Title: Rapid development of an ice...

  8. Complex systems influence melting of Greenland ice sheet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Complex systems influence melting of Greenland ice sheet Complex systems influence melting of Greenland ice sheet International research team's field work shows that, well, things...

  9. Cosmic-ray results from IceCube/ Mumbai, 12/12/12 Tom Gaisser for the IceCube Collab. 1

    E-Print Network [OSTI]

    Gaisser, Thomas K.

    Cosmic-ray results from IceCube/ IceTop Mumbai, 12/12/12 Tom Gaisser for the IceCube Collab. 1 #12;Mumbai, 12/12/12 Tom Gaisser for the IceCube Collab. 2 events ­ IceTop/deep IceCube Mumbai, 12/12/12 Tom Gaisser for the IceCube Collab

  10. Photogrammetry & Machine Vision 1. Image sensors

    E-Print Network [OSTI]

    Giger, Christine

    Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 1. Measurement in images (b) Camera calibration of Photogrammetry and Machine Vision Fully understand: 1. Image based 3D and 4D measurement 2. Image based 3D

  11. Photogrammetry & Machine Vision 1. Image sensors

    E-Print Network [OSTI]

    Giger, Christine

    Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation, texturing (b) Camera, noise) 2N. D'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation

  12. Machine Learning Attacks Against the ASIRRA CAPTCHA

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Machine Learning Attacks Against the ASIRRA CAPTCHA Draft, February 28, 2008 Philippe Golle Palo of cats and dogs used in ASIRRA. This classifier is a combination of support-vector machine classifiers higher than the estimate given in [6] for machine vision attacks. The weakness we expose in the current

  13. Task and Machine Heterogeneities: Higher Moments Matter

    E-Print Network [OSTI]

    Maciejewski, Anthony A. "Tony"

    Task and Machine Heterogeneities: Higher Moments Matter Abdulla M. Al-Qawasmeh 1 , Anthony A.potter}@colostate.edu jtsmith@digitalglobe.com Abstract - One type of heterogeneous computing (HC) systems consists of machines in this matrix represents the ETC of a specific task on a specific machine when executed exclusively. Heuristics

  14. Method and apparatus for monitoring machine performance

    DOE Patents [OSTI]

    Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

    1996-01-01

    Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

  15. Unsupervised Segmentation for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Unsupervised Segmentation for Statistical Machine Translation Siriwan Sereewattana TH E U N I V E R for statistical machine translation. The approach requires no language- nor domain-specific knowledge whatsoever in principle the statistical framework of machine translation can be ap- plied to any language pair

  16. Debugging Fortran on a shared memory machine

    SciTech Connect (OSTI)

    Allen, T.R.; Padua, D.A.

    1987-01-01

    Debugging on a parallel processor is more difficult than debugging on a serial machine because errors in a parallel program may introduce nondeterminism. The approach to parallel debugging presented here attempts to reduce the problem of debugging on a parallel machine to that of debugging on a serial machine by automatically detecting nondeterminism. 20 refs., 6 figs.

  17. Passive ice freezing-releasing heat pipe

    DOE Patents [OSTI]

    Gorski, Anthony J. (Lemont, IL); Schertz, William W. (Batavia, IL)

    1982-01-01

    A heat pipe device has been developed which permits completely passive ice formation and periodic release of ice without requiring the ambient temperature to rise above the melting point of water. This passive design enables the maximum amount of cooling capacity to be stored in the tank.

  18. Ice Cover on the Great Lakes NATIONALOCEANIC

    E-Print Network [OSTI]

    : In the shallow waters where whitefish spawn, ice cover protects their eggs from destructive wind and wave action://coastwatch.glerl.noaa.gov/glsea/cur/glsea_cur.png #12;GLERL Research Forecast capability The capability to forecast and predict ice cover is important for recreational safety and rescue efforts as well as for navigation, weather forecasting, adapting to lake level

  19. Parameterizing Size Distribution in Ice Clouds

    SciTech Connect (OSTI)

    DeSlover, Daniel; Mitchell, David L.

    2009-09-25

    PARAMETERIZING SIZE DISTRIBUTIONS IN ICE CLOUDS David L. Mitchell and Daniel H. DeSlover ABSTRACT An outstanding problem that contributes considerable uncertainty to Global Climate Model (GCM) predictions of future climate is the characterization of ice particle sizes in cirrus clouds. Recent parameterizations of ice cloud effective diameter differ by a factor of three, which, for overcast conditions, often translate to changes in outgoing longwave radiation (OLR) of 55 W m-2 or more. Much of this uncertainty in cirrus particle sizes is related to the problem of ice particle shattering during in situ sampling of the ice particle size distribution (PSD). Ice particles often shatter into many smaller ice fragments upon collision with the rim of the probe inlet tube. These small ice artifacts are counted as real ice crystals, resulting in anomalously high concentrations of small ice crystals (D < 100 µm) and underestimates of the mean and effective size of the PSD. Half of the cirrus cloud optical depth calculated from these in situ measurements can be due to this shattering phenomenon. Another challenge is the determination of ice and liquid water amounts in mixed phase clouds. Mixed phase clouds in the Arctic contain mostly liquid water, and the presence of ice is important for determining their lifecycle. Colder high clouds between -20 and -36 oC may also be mixed phase but in this case their condensate is mostly ice with low levels of liquid water. Rather than affecting their lifecycle, the presence of liquid dramatically affects the cloud optical properties, which affects cloud-climate feedback processes in GCMs. This project has made advancements in solving both of these problems. Regarding the first problem, PSD in ice clouds are uncertain due to the inability to reliably measure the concentrations of the smallest crystals (D < 100 µm), known as the “small mode”. Rather than using in situ probe measurements aboard aircraft, we employed a treatment of ice cloud optical properties formulated in terms of PSD parameters in combination with remote measurements of thermal radiances to characterize the small mode. This is possible since the absorption efficiency (Qabs) of small mode crystals is larger at 12 µm wavelength relative to 11 µm wavelength due to the process of wave resonance or photon tunneling more active at 12 µm. This makes the 12/11 µm absorption optical depth ratio (or equivalently the 12/11 µm Qabs ratio) a means for detecting the relative concentration of small ice particles in cirrus. Using this principle, this project tested and developed PSD schemes that can help characterize cirrus clouds at each of the three ARM sites: SGP, NSA and TWP. This was the main effort of this project. These PSD schemes and ice sedimentation velocities predicted from them have been used to test the new cirrus microphysics parameterization in the GCM known as the Community Climate Systems Model (CCSM) as part of an ongoing collaboration with NCAR. Regarding the second problem, we developed and did preliminary testing on a passive thermal method for retrieving the total water path (TWP) of Arctic mixed phase clouds where TWPs are often in the range of 20 to 130 g m-2 (difficult for microwave radiometers to accurately measure). We also developed a new radar method for retrieving the cloud ice water content (IWC), which can be vertically integrated to yield the ice water path (IWP). These techniques were combined to determine the IWP and liquid water path (LWP) in Arctic clouds, and hence the fraction of ice and liquid water. We have tested this approach using a case study from the ARM field campaign called M-PACE (Mixed-Phase Arctic Cloud Experiment). This research led to a new satellite remote sensing method that appears promising for detecting low levels of liquid water in high clouds typically between -20 and -36 oC. We hope to develop this method in future research.

  20. Covered Product Category: Air-Cooled Ice Machines | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p aDepartmentEnergyEvery Thanksgiving, we hear and© 2015provides

  1. Radiostratigraphy and age structure of the Greenland Ice Sheet

    E-Print Network [OSTI]

    2015-01-01

    is 3.15, equivalent to a radio-wave velocity in ice of 168.9to be vertical) that a radio wave travels through ice during?t is where v ice is the radio-wave velocity in ice, ?z Ľ v

  2. Crystalline water ice on the Kuiper belt object (50000) Quaoar

    E-Print Network [OSTI]

    Jewitt, David C.

    .............................................................. Crystalline water ice on the Kuiper the presence of crystalline water ice and ammonia hydrate. Crystallinity indicates that the ice has been heated to at least 110 K. Both ammonia hydrate and crystalline water ice should be destroyed by energetic particle

  3. Molecular simulations of heterogeneous ice nucleation. I. Controlling ice nucleation through surface hydrophilicity

    E-Print Network [OSTI]

    Stephen J. Cox; Shawn M. Kathmann; Ben Slater; Angelos Michaelides

    2015-05-29

    Ice formation is one of the most common and important processes on earth and almost always occurs at the surface of a material. A basic understanding of how the physicochemical properties of a material's surface affect its ability to form ice has remained elusive. Here, we use molecular dynamics simulations to directly probe heterogeneous ice nucleation at a hexagonal surface of a nanoparticle of varying hydrophilicity. Surprisingly, we find that structurally identical surfaces can both inhibit and promote ice formation and analogous to a chemical catalyst, it is found that an optimal interaction between the surface and the water exists for promoting ice nucleation. We use our microscopic understanding of the mechanism to design a modified surface in silico with enhanced ice nucleating ability.

  4. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  5. A Smoothed Particle Hydrodynamics Model for Ice Sheet and Ice Shelf Dynamics

    SciTech Connect (OSTI)

    Pan, Wenxiao; Tartakovsky, Alexandre M.; Monaghan, Joseph J.

    2012-02-08

    Mathematical modeling of ice sheets is complicated by the non-linearity of the governing equations and boundary conditions. Standard grid-based methods require complex front tracking techniques and have limited capability to handle large material deformations and abrupt changes in bottom topography. As a consequence, numerical methods are usually restricted to shallow ice sheet and ice shelf approximations. We propose a new smoothed particle hydrodynamics (SPH) model for coupled ice sheet and ice shelf dynamics. SPH is a fully Lagrangian particle method. It is highly scalable and its Lagrangian nature and meshless discretization are well suited to the simulation of free surface flows, large material deformation, and material fragmentation. In this paper SPH is used to study ice sheet/ice shelf behavior, and the dynamics of the grounding line. The steady state position of the grounding line obtained from the SPH simulations is in good agreement with laboratory observations for a wide range of simulated bedrock slopes, and density ratios similar to those of ice and sea water. The numerical accuracy of the SPH algorithm is further verified by simulating the plane shear flow of two immiscible fluids and the propagation of a highly viscous blob of fluid along a horizontal surface. In the experiment, the ice was represented with a viscous newtonian fluid. For consistency, in the described SPH model the ice is also modeled as a viscous newtonian fluid. Typically, ice sheets are modeled as a non-Newtonian fluid, accounting for the changes in the mechanical properties of ice. Implementation of a non-Newtonian rheology in the SPH model is the subject of our ongoing research.

  6. Smoothed particle hydrodynamics Non-Newtonian model for ice-sheet and ice-shelf dynamics

    SciTech Connect (OSTI)

    Pan, Wenxiao; Tartakovsky, Alexandre M.; Monaghan, Joseph J.

    2013-06-01

    Mathematical modeling of ice sheets is complicated by the non-linearity of the governing equations and boundary conditions. Standard grid-based methods require complex front tracking techniques and have limited capability to handle large material deformations and abrupt changes in bottom topography. As a consequence, numerical methods are usually restricted to shallow ice sheet and ice shelf approximations. We propose a new smoothed particle hydrodynamics (SPH) non-Newtonian model for coupled ice sheet and ice shelf dynamics. SPH, a fully Lagrangian particle method, is highly scalable and its Lagrangian nature and meshless discretization are well suited to the simulation of free surface ?ows, large material deformation, and material fragmentation. In this paper, SPH is used to study 3D ice sheet/ice shelf behavior, and the dynamics of the grounding line. The steady state position of the grounding line obtained from SPH simulations is in good agreement with laboratory observations for a wide range of simulated bedrock slopes, and density ratios, similar to those of ice and sea water. The numerical accuracy of the SPH algorithm is veri?ed by simulating Poiseuille ?ow, plane shear ?ow with free surface and the propagation of a blob of ice along a horizontal surface. In the laboratory experiment, the ice was represented with a viscous Newtonian ?uid. In the present work, however, the ice is modeled as both viscous Newtonian ?uid and non-Newtonian ?uid, such that the e?ect of non-Newtonian rheology on the dynamics of grounding line was examined. The non-Newtonian constitutive relation is prescribed to be Glen’s law for the creep of polycrystalline ice. A V-shaped bedrock ramp is further introduced to model the real geometry of bedrock slope.

  7. Do blue-ice moraines in the Heritage Range show the West Antarctic ice sheet survived the last interglacial?

    E-Print Network [OSTI]

    Do blue-ice moraines in the Heritage Range show the West Antarctic ice sheet survived the last in revised form 10 January 2011 Accepted 28 January 2011 Available online xxxx Keywords: Blue-ice moraine cosmogenic isotope data on blue-ice moraines in the Heritage Range, West Antarctica. The age of the moraines

  8. Inter-annual sea-ice dynamics and micro-algal biomass in winter pack ice of Marguerite Bay, Antarctica

    E-Print Network [OSTI]

    Stewart, Frank

    in this region (Stammerjohn et al., 2003; Stammerjohn and Smith, 1996). Changes in mesoscale ice dynamics

  9. Processes driving sea ice variability in the Bering Sea in an eddying ocean/sea ice model: Mean seasonal cycle

    E-Print Network [OSTI]

    Eisenman, Ian

    the southern ice edge, especially on the western side. The sea ice force balance analysis shows that sea ice air from northerly winds and ice motion away from the coast. South of St Lawrence Island, winds drive is important both climatically and economically. Understanding the processes that control the temporal

  10. Communication: On the stability of ice 0, ice i, and I{sub h}

    SciTech Connect (OSTI)

    Quigley, D.; Alfč, D.; Slater, B.

    2014-10-28

    Using ab initio methods, we examine the stability of ice 0, a recently proposed tetragonal form of ice implicated in the homogeneous freezing of water [J. Russo, F. Romano, and H. Tanaka, Nat. Mater. 13, 670 (2014)]. Vibrational frequencies are computed across the complete Brillouin Zone using Density Functional Theory (DFT), to confirm mechanical stability and quantify the free energy of ice 0 relative to ice I{sub h}. The robustness of this result is tested via dispersion corrected semi-local and hybrid DFT, and Quantum Monte-Carlo calculation of lattice energies. Results indicate that popular molecular models only slightly overestimate the stability of ice zero. In addition, we study all possible realisations of proton disorder within the ice zero unit cell, and identify the ground state as ferroelectric. Comparisons are made to other low density metastable forms of ice, suggesting that the ice i structure [C. J. Fennel and J. D. Gezelter, J. Chem. Theory Comput. 1, 662 (2005)] may be equally relevant to ice formation.

  11. Weakening of ice by magnesium perchlorate hydrate

    E-Print Network [OSTI]

    Lenferink, Hendrik J., 1985-

    2012-01-01

    I show that perchlorate hydrates, which have been indirectly detected at high Martian circumpolar latitudes by the Phoenix Mars Lander, have a dramatic effect upon the rheological behavior of polycrystalline water ice under ...

  12. Largest Ice-Bank Promotes Load Management 

    E-Print Network [OSTI]

    Brarmann, G. L.

    1983-01-01

    conservation measures were incorporated in the design of the new research facility, the ice-bank system has been the most cost-effective of the load management projects at Union Oil....

  13. Widespread Excess Ice in Arcadia Planitia, Mars

    E-Print Network [OSTI]

    Bramson, Ali M; Putzig, Nathaniel E; Sutton, Sarah; Plaut, Jeffrey J; Brothers, T Charles; Holt, John W

    2015-01-01

    The distribution of subsurface water ice on Mars is a key constraint on past climate, while the volumetric concentration of buried ice (pore-filling versus excess) provides information about the process that led to its deposition. We investigate the subsurface of Arcadia Planitia by measuring the depth of terraces in simple impact craters and mapping a widespread subsurface reflection in radar sounding data. Assuming that the contrast in material strengths responsible for the terracing is the same dielectric interface that causes the radar reflection, we can combine these data to estimate the dielectric constant of the overlying material. We compare these results to a three-component dielectric mixing model to constrain composition. Our results indicate a widespread, decameters-thick layer that is excess water ice ~10^4 km^3 in volume. The accumulation and long-term preservation of this ice is a challenge for current Martian climate models.

  14. Spreading of oil spilled under ice

    SciTech Connect (OSTI)

    Yapa, P.D.; Chowdhury, T. )

    1990-12-01

    A new set of equations is presented to describe the process of oil spreading under ice in clam waters. These equations consider the gravity (buoyancy)-inertia phase, the gravity (buoyancy)-viscous phase, and the termination of spreading during the buoyancy-surface-tension phase. The derivation considers both the constant discharge mode and the constant volume mode. Therefore, a complete description of the spreading phenomena from the time of initial spill to the termination of spreading is presented. Laboratory experiments were conducted using both real ice covers in a cold room and artificial ice covers. The experiments included different ice-cover roughnesses from smooth to rough, oils of different viscosities, and a variety of discharge conditions. The experimental data show close agreement with the theory. These equations can be used during cleanup or environmental impact assessment to estimate the area of an oil slick with respect to time.

  15. Glaciers and Ice Sheets Mapping Orbiter concept

    E-Print Network [OSTI]

    Jezek, Kenneth; Rodriguez, Ernesto; Gogineni, Sivaprasad; Freeman, Anthony; Curlander, John; Paden, John D.; Allen, Christopher Thomas

    2006-05-13

    We describe a concept for a spaceborne radar system designed to measure the surface and basal topography of terrestrial ice sheets and to determine the physical properties of the glacier bed. Our primary objective is to ...

  16. Recent vs from IceCube

    E-Print Network [OSTI]

    Klein, Spencer R.; IceCube Collaboration

    2008-01-01

    in the Sun and the Earth, look for low-energy (10 MeV)Sun. IceTop has made a preliminary measurement of the cosmic-ray energy

  17. Development of a Mobile Ice Nucleus Counter

    SciTech Connect (OSTI)

    Kok, Gregory; Kulkarni, Gourihar

    2014-07-10

    An ice nucleus counter has been constructed. The instrument uses built-in refrigeration systems for wall cooling. A cascade refrigeration system will allow the cold wall to operate as low as -70 deg C, and a single stage system can operate the warm wall at -45 deg C. A unique optical particle counter has been constructed using polarization detection of the scattered light. This allows differentiation of the particles exiting the chamber to determine if they are ice or liquid.

  18. Micro-machined calorimetric biosensors

    DOE Patents [OSTI]

    Doktycz, Mitchel J. (Knoxville, TN); Britton, Jr., Charles L. (Alcoa, TN); Smith, Stephen F. (Loudon, TN); Oden, Patrick I. (Plano, TX); Bryan, William L. (Knoxville, TN); Moore, James A. (Powell, TN); Thundat, Thomas G. (Knoxville, TN); Warmack, Robert J. (Knoxville, TN)

    2002-01-01

    A method and apparatus are provided for detecting and monitoring micro-volumetric enthalpic changes caused by molecular reactions. Micro-machining techniques are used to create very small thermally isolated masses incorporating temperature-sensitive circuitry. The thermally isolated masses are provided with a molecular layer or coating, and the temperature-sensitive circuitry provides an indication when the molecules of the coating are involved in an enthalpic reaction. The thermally isolated masses may be provided singly or in arrays and, in the latter case, the molecular coatings may differ to provide qualitative and/or quantitative assays of a substance.

  19. Setup reduction approaches for machining

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1997-04-01

    Rapid setup is a common improvement approach in press working operations such as blanking and shearing. It has paid major dividends in the sheet metal industry. It also has been a major improvement thrust for high-production machining operations. However, the literature does not well cover all the setup operations and constraints for job shop work. This review provides some insight into the issues involved. It highlights the floor problems and provides insights for further improvement. The report is designed to provide a quick understanding of the issues.

  20. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

    1996-11-12

    A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

  1. Free-piston cutting machine

    DOE Patents [OSTI]

    Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  2. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, J.R.; Reich, M.

    1996-11-12

    A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

  3. Green Machine | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainableGlynn County, Georgia:Oregon:Corp Jump to:India Renewables PvtMachine Jump

  4. Machine Learning A Scientific Method

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverseIMPACTThousandReport) | SciTechAdministrationMTBE(Technical Report)Machine

  5. On the correlation between ice water content and ice crystal size and its application to radiative transfer and general circulation models

    E-Print Network [OSTI]

    Liou, K. N.

    On the correlation between ice water content and ice crystal size and its application to radiative analysis involving ice water content (IWC) and mean effective ice crystal size (De) intended, K. N., Y. Gu, Q. Yue, and G. McFarguhar (2008), On the correlation between ice water content and ice

  6. IceCube: Performance, Status, and Future

    E-Print Network [OSTI]

    Carsten Rott; for the IceCube Collaboration

    2006-11-28

    High-energy neutrinos are uniquely suited to study a large variety of physics as they traverse the universe almost untouched, in contrast to conventional astronomical messengers like photons or cosmic rays which are limited by interactions with radiation and matter at high energies or deflected by ambient magnetic fields. Located at the South Pole, IceCube combined with its predecessor AMANDA comprise the world's largest neutrino telescope. IceCube currently consists of nine strings, each containing 60 digital optical modules, deployed at depths of 1.5 to 2.5km in the ice and an array of 16 surface air-shower stations. IceCube is expected to be completed in early 2011 at which time it will instrument a volume of one km^3 below the IceTop air-shower array covering an area of one km^2. The current IceCube detector performance is described and an outlook given into the large variety of physics that it can address, with an emphasis on the search for ultra-high-energy neutrinos which may shed light on the origins of the highest energy cosmic rays.

  7. IceCube: Performance, Status, and Future

    E-Print Network [OSTI]

    Rott, C

    2006-01-01

    High-energy neutrinos are uniquely suited to study a large variety of physics as they traverse the universe almost untouched, in contrast to conventional astronomical messengers like photons or cosmic rays which are limited by interactions with radiation and matter at high energies or deflected by ambient magnetic fields. Located at the South Pole, IceCube combined with its predecessor AMANDA comprise the world's largest neutrino telescope. IceCube currently consists of nine strings, each containing 60 digital optical modules, deployed at depths of 1.5 to 2.5km in the ice and an array of 16 surface air-shower stations. IceCube is expected to be completed in early 2011 at which time it will instrument a volume of one km^3 below the IceTop air-shower array covering an area of one km^2. The current IceCube detector performance is described and an outlook given into the large variety of physics that it can address, with an emphasis on the search for ultra-high-energy neutrinos which may shed light on the origins ...

  8. Ice chemistry in starless molecular cores

    E-Print Network [OSTI]

    Kalvans, Juris

    2015-01-01

    Starless molecular cores are natural laboratories for interstellar molecular chemistry research. The chemistry of ices in such objects was investigated with a three-phase (gas, surface, and mantle) model. We considered the center part of five starless cores, with their physical conditions derived from observations. The ice chemistry of oxygen, nitrogen, sulfur, and complex organic molecules (COMs) was analyzed. We found that an ice-depth dimension, measured, e.g., in monolayers, is essential for modeling of chemistry in interstellar ices. Particularly, the H2O:CO:CO2:N2:NH3 ice abundance ratio regulates the production and destruction of minor species. It is suggested that photodesorption during core collapse period is responsible for high abundance of interstellar H2O2 and O2H, and other species synthesized on the surface. The calculated abundances of COMs in ice were compared to observed gas-phase values. Smaller activation barriers for CO and H2CO hydrogenation may help explain the production of a number of...

  9. Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade

    E-Print Network [OSTI]

    Zhu, Yufei

    2009-01-01

    In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

  10. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    studies to correlate energy usage with the operations beinghas characterized machining energy usage solely based on theplanning, process energy usage was characterized solely by

  11. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R. (Rolla, MO)

    1981-05-05

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  12. Interoperability Standards for Machine Tool Performance Monitoring

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2008-01-01

    Performance Monitoring Athulan Vijayaraghavan, David Dornfeld Laboratory for Manufacturing and Sustainability,sustainability of the system. Keywords: Interoperability, machine tool communication, performance

  13. 6.685 Electric Machines, Fall 2003

    E-Print Network [OSTI]

    Kirtley, James L.

    Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

  14. Technology demonstration of Ka-band digitally-beamformed radar for ice topography mapping

    E-Print Network [OSTI]

    Sadowy, G; Heavey, B; Moller, D; Rignot, E; Zawadzki, M; Rengarajan, S

    2007-01-01

    Beamformed Radar for Ice Topography Mapping Gregory Sadowy,Glacier and Land Ice Surface Topography Interferometer) is aGLISTIN will collect ice topography measurements over a wide

  15. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

    1994-08-16

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

  16. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

    1994-01-01

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

  17. International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored

    E-Print Network [OSTI]

    1st International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored Tunnels N. CLARKE-HACKSTON, M. MESSING, E. ULLRICH VMT GmbH, Bruchsal Germany Abstract of the machine and the tunnel support are able to operate at the desired rate. This paper describes

  18. Using Machine Affinity to Increase Science Throughput (Machine Affinity Characterization of the HPCMP Workload)

    E-Print Network [OSTI]

    Snavely, Allan

    on the "Standard" benchmark input at 128 processors, then the machines are ranked (fastest to slowest) as shownUsing Machine Affinity to Increase Science Throughput (Machine Affinity Characterization San Diego Supercomputer Center, University of California, San Diego, CA {allans, lcarring, agamst

  19. "Multi-machine" Strategy: The Other Path of the FESAC

    E-Print Network [OSTI]

    "Multi-machine" Strategy: The Other Path of the FESAC Burning Plasma Strategy Gerald Navratil Difference ITER Development Path FIRE Development Path `Single Machine Strategy' `Multi-machine Strategy Machine Strategy' `Multi-machine Strategy' `One Step to DEMO' Modular Strategy `Penultimate Step to DEMO

  20. I. Introduction Equivalent loading of induction machines are

    E-Print Network [OSTI]

    Szabados, Barna

    phase synchronous machine. If the synchronous machine had a rotor with two windings with a spacial phaseI. Introduction Equivalent loading of induction machines are used to test machines for temperature loading tests, lead to the conclusion that synthetic loading is a viable simple test for large machines

  1. Assimilation of Ice Concentration in an IceOcean Model R. W. LINDSAY AND J. ZHANG

    E-Print Network [OSTI]

    Zhang, Jinlun

    of the actual fields. The simulated ice thickness can then be used to determine the major modes of variability of the ice thickness and the physical processes that are important in their formation. The simulations from concentration measured by satellites is subject to errors (Kwok 2002), particularly during the summer when

  2. ICED'09/148 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09

    E-Print Network [OSTI]

    Papalambros, Panos

    , marketing, and psychology. Quantitative models from these disciplines can be integrated into a design for teaching product design and for designing products taking into account market and policy environments alongICED'09/148 INTERNATIONAL CONFERENCE ON ENGINEERING DESIGN, ICED'09 24 - 27 AUGUST 2009, STANFORD

  3. Heat transfer in ice hockey halls: measurements, energy analysis and analytical ice pad temperature profile

    E-Print Network [OSTI]

    Ferrantelli, Andrea

    2015-01-01

    We consider heat transfer processes in an ice hockey hall, during operating conditions, with a bottom-up approach based upon on-site measurements. Detailed temperature data of both the ice pad and the air above the ice rink are used for a heat balance calculation in the steady-state regime, which quantifies the impact of each single heat source. We solve the heat equation in the ice slab in transient regime, and obtain a general analytical formula for the temperature profile. This solution is then applied to the resurfacing process by using our measurements as (time-dependent) boundary conditions (b.c.), and compared to an analogous numerical computation with good agreement. Our analytical formula is given with implicit initial condition and b.c., therefore it can be used not only in ice halls, but in a large variety of engineering applications.

  4. Heat transfer in ice hockey halls: measurements, energy analysis and analytical ice pad temperature profile

    E-Print Network [OSTI]

    Andrea Ferrantelli; Klaus Viljanen

    2015-06-30

    We consider heat transfer processes in an ice hockey hall, during operating conditions, with a bottom-up approach based upon on-site measurements. Detailed temperature data of both the ice pad and the air above the ice rink are used for a heat balance calculation in the steady-state regime, which quantifies the impact of each single heat source. We solve the heat equation in the ice slab in transient regime, and obtain a general analytical formula for the temperature profile. This solution is then applied to the resurfacing process by using our measurements as (time-dependent) boundary conditions (b.c.), and compared to an analogous numerical computation with good agreement. Our analytical formula is given with implicit initial condition and b.c., therefore it can be used not only in ice halls, but in a large variety of engineering applications.

  5. The Role of Snow and Ice in the Climate System

    SciTech Connect (OSTI)

    Barry, Roger G.

    2007-12-19

    Global snow and ice cover (the 'cryosphere') plays a major role in global climate and hydrology through a range of complex interactions and feedbacks, the best known of which is the ice - albedo feedback. Snow and ice cover undergo marked seasonal and long term changes in extent and thickness. The perennial elements - the major ice sheets and permafrost - play a role in present-day regional and local climate and hydrology, but the large seasonal variations in snow cover and sea ice are of importance on continental to hemispheric scales. The characteristics of these variations, especially in the Northern Hemisphere, and evidence for recent trends in snow and ice extent are discussed.

  6. The Role of Snow and Ice in the Climate System

    ScienceCinema (OSTI)

    Barry, Roger G.

    2009-09-01

    Global snow and ice cover (the 'cryosphere') plays a major role in global climate and hydrology through a range of complex interactions and feedbacks, the best known of which is the ice - albedo feedback. Snow and ice cover undergo marked seasonal and long term changes in extent and thickness. The perennial elements - the major ice sheets and permafrost - play a role in present-day regional and local climate and hydrology, but the large seasonal variations in snow cover and sea ice are of importance on continental to hemispheric scales. The characteristics of these variations, especially in the Northern Hemisphere, and evidence for recent trends in snow and ice extent are discussed.

  7. Multitasking without Compromise: a Virtual Machine Evolution

    E-Print Network [OSTI]

    Baumgartner, Gerald

    Multitasking without Compromise: a Virtual Machine Evolution Grzegorz Czajkowski Laurent Daynčs Sun grzegorz.czajkowski@sun.com laurent.daynes@sun.com ABSTRACT The Multitasking Virtual Machine (called from collector to provide best-effort management of a portion of the heap space, and a transparent and automated

  8. Synchronous Machine Modeling 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    windings There are 5 physical windings on a synchronous generator. · The 3 stator (phase) windings, denotedSynchronous Machine Modeling 1.0 Introduction Our motivation at this point is to put you in a position to understand synchronous machine modeling for power system dynamic analysis. If you take EE 457

  9. DRAWING MACHINES AN ARTS AND ENGINEERING COLLABORATION

    E-Print Network [OSTI]

    Drawing Machines Arduino, foam core, masking tape #12;High School Summer Workshop ! Become familiar with drawing machines ! Explore Arduino and components ! Prototype with foam board ! Explore components Explore Computer control with Arduino Introduces computing in an arts context Introduces art in a computing

  10. Support Vector Machines with Example Dependent Costs

    E-Print Network [OSTI]

    Brefeld, Ulf

    Support Vector Machines with Example Dependent Costs Ulf Brefeld, Peter Geibel, and Fritz Wysotzki neu- ral networks and machine learning, typically, do not take any costs into account or allow only costs depending on the classes of the examples that are used for learning. As an extension of class

  11. WATER ICE IN THE KUIPER BELT

    SciTech Connect (OSTI)

    Brown, M. E.; Fraser, W. C. [Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125 (United States); Schaller, E. L., E-mail: mbrown@caltech.edu [NASA Dryden Aircraft Operations Facility, Palmdale, CA 93550 (United States)

    2012-06-15

    We examine a large collection of low-resolution near-infrared spectra of Kuiper Belt objects (KBOs) and centaurs in an attempt to understand the presence of water ice in the Kuiper Belt. We find that water ice on the surface of these objects occurs in three separate manners: (1) Haumea family members uniquely show surfaces of nearly pure water ice, presumably a consequence of the fragmentation of the icy mantle of a larger differentiated proto-Haumea; (2) large objects with absolute magnitudes of H < 3 (and a limited number to H = 4.5) have surface coverings of water ice-perhaps mixed with ammonia-that appears to be related to possibly ancient cryovolcanism on these large objects; and (3) smaller KBOs and centaurs which are neither Haumea family members nor cold-classical KBOs appear to divide into two families (which we refer to as 'neutral' and 'red'), each of which is a mixture of a common nearly neutral component and either a slightly red or very red component that also includes water ice. A model suggesting that the difference between neutral and red objects due to formation in an early compact solar system either inside or outside, respectively, of the {approx}20 AU methanol evaporation line is supported by the observation that methanol is only detected on the reddest objects, which are those which would be expected to have the most of the methanol containing mixture.

  12. Novel machine learning and correlation network methods for genomic data

    E-Print Network [OSTI]

    Song, Lin

    2013-01-01

    Prediction accuracy in the UCI machine learning bench- markbetween features in the UCI machine learning benchmark data.SVM: support vector machine. CHAPTER 2 FIGURES Figure 2.1:

  13. Combining Bilingual and Comparable Corpora for Low Resource Machine Translation

    E-Print Network [OSTI]

    Plotkin, Joshua B.

    Combining Bilingual and Comparable Corpora for Low Resource Machine Translation Ann Irvine Center, Malayalam, Hindi, and Urdu into English. 1 Introduction Standard statistical machine translation (SMT Science Dept. University of Pennsylvania Abstract Statistical machine translation (SMT) per- formance

  14. A hybrid type small 5-axis CNC milling machine

    E-Print Network [OSTI]

    Son, Seung-Kil, 1964-

    2002-01-01

    5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

  15. Fast Numerical Method for Growth and Retreat of Subsurface Ice on Mars Norbert Schorghofer

    E-Print Network [OSTI]

    Schörghofer, Norbert

    ice, retreat of pore ice, retreat of an ice sheet, and retreat of pore ice due to geothermal heating is the vertical spatial resolution and D the diffusion coefficient. The vertical grid spacing needs to be finer

  16. Turbulent heat exchange between water and ice at an evolving ice-water interface

    E-Print Network [OSTI]

    Ramudu, Eshwan; Olson, Peter; Gnanadesikan, Anand

    2015-01-01

    We conduct laboratory experiments on the time evolution of an ice layer cooled from below and subjected to a turbulent shear flow of warm water from above. Our study is motivated by observations of warm water intrusion into the ocean cavity under Antarctic ice shelves, accelerating the melting of their basal surfaces. The strength of the applied turbulent shear flow in our experiments is represented in terms of its Reynolds number $\\textit{Re}$, which is varied over the range $2.0\\times10^3 \\le \\textit{Re} \\le 1.0\\times10^4$. Depending on the water temperature, partial transient melting of the ice occurs at the lower end of this range of $\\textit{Re}$ and complete transient melting of the ice occurs at the higher end. Following these episodes of transient melting, the ice reforms at a rate that is independent of $\\textit{Re}$. We fit our experimental measurements of ice thickness and temperature to a one-dimensional model for the evolution of the ice thickness in which the turbulent heat transfer is parameter...

  17. Equations of state of ice VI and ice VII at high pressure and high temperature

    SciTech Connect (OSTI)

    Bezacier, Lucile; Hanfland, Michael; Journaux, Baptiste; Perrillat, Jean-Philippe; Cardon, Hervé; Daniel, Isabelle

    2014-09-14

    High-pressure H{sub 2}O polymorphs among which ice VI and ice VII are abundant in the interiors of large icy satellites and exo-planets. Knowledge of the elastic properties of these pure H{sub 2}O ices at high-temperature and high-pressure is thus crucial to decipher the internal structure of icy bodies. In this study we assess for the first time the pressure-volume-temperature (PVT) relations of both polycrystalline pure ice VI and ice VII at high pressures and temperatures from 1 to 9 GPa and 300 to 450 K, respectively, by using in situ synchrotron X-ray diffraction. The PVT data are adjusted to a second-order Birch-Murnaghan equation of state and give V{sub 0} = 14.17(2) cm{sup 3}?mol{sup ?1}, K{sub 0} = 14.05(23) GPa, and ?{sub 0} = 14.6(14) × 10{sup ?5} K{sup ?1} for ice VI and V{sub 0} = 12.49(1) cm{sup 3}?mol{sup ?1}, K{sub 0} = 20.15(16) GPa, and ?{sub 0} = 11.6(5) × 10{sup ?5} K{sup ?1} for ice VII.

  18. Rapid Compression Machine ? A Key Experimental Device to Effectively...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compression Machine A Key Experimental Device to Effectively Collaborate with Basic Energy Sciences Rapid Compression Machine A Key Experimental Device to Effectively...

  19. KCP relocates 18-ton machine | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    relocations. It took nearly three days to disassemble the machine and prepare it for transport. The machine was partially disassembled, removing auxiliary pieces from the main...

  20. Advnaced Power Electronics and Electric Machines (APEEM) R&D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle...

  1. Rage against the machines: how subjects play against learning algorithms

    E-Print Network [OSTI]

    Duersch, Peter; Kolb, Albert; Oechssler, Jörg; Schipper, Burkhard C.

    2010-01-01

    Rage against the machines—How Subjects Learn to Play Againstagainst the machines: how subjects play against learningexperiment to explore how subjects learn to play against

  2. A reconciled estimate of ice-sheet mass balance

    E-Print Network [OSTI]

    2012-01-01

    Estimate of Ice-Sheet Mass Balance Andrew Shepherd, 1 * Erikand models of surface mass balance and glacial isostaticThis Ice Sheet Mass Balance Exercise (IMBIE) was facilitated

  3. Optimization of Ice Thermal Storage Systems Design for HVAC Systems 

    E-Print Network [OSTI]

    Nassif, N.; Hall, C.; Freelnad, D.

    2013-01-01

    energy cost. A tool for optimal ice storage design is developed, considering the charging and discharge times and optimal sizing of ice thermal storage system. Detailed simulation studies using real office building located near Orlando, FL including...

  4. Searching for Cosmic Accelerators via IceCube

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Searching for Cosmic Accelerators via IceCube Searching for Cosmic Accelerators via IceCube Berkeley Lab Researchers Part of an International Hunt November 21, 2013 Lynn Yarris,...

  5. Cirrus cloud formation and the role of heterogeneous ice nuclei

    E-Print Network [OSTI]

    Froyd, Karl D.

    2013-01-01

    Composition, size, and phase are key properties that define the ability of an aerosol particle to initiate ice in cirrus clouds. Properties of cirrus ice nuclei (IN) have not been well constrained due to a lack of systematic ...

  6. Energy conservation in ice skating rinks

    SciTech Connect (OSTI)

    Dietrich, B.K.; McAvoy, T.J.

    1980-01-01

    An economic and energy analysis of ice rinks was made to examine the areas in which energy could be profitably conserved. The areas where new equipment could make a major reduction in energy use are: the use of waste heat for space heating, the installation of a low emissivity false ceiling to reduce radiant heat, the use of a load cycling controller to reduce refrigeration costs, and the installation of more efficient lighting systems. Changes in rink operating procedure that could cut energy use are: higher refrigerant temperatures, thinner ice, the use of colder resurfacing water, turning the compressors and pumps off at night, and reducing ventilation.

  7. Operation and Control of Full Ice-storage System 

    E-Print Network [OSTI]

    Liu, Q.; Liu, Y.

    2006-01-01

    In a dividing time ice-storage system, the refrigerator does not operate during power's on-peak period, and all the cooling is supplied by the ice stored in off-peak period, so that the use of electricity can be maintained. When the ice is thawing...

  8. Ice Simulation Using GPGPU Shadi Alawneh and Dennis Peters

    E-Print Network [OSTI]

    Peters, Dennis

    is to increase the understanding of interactions between ice and steel structures such as ships and oil rigsIce Simulation Using GPGPU Shadi Alawneh and Dennis Peters Electrical and Computer Engineering.alawneh, dpeters}@mun.ca Abstract-- Simulation of the behaviour of a ship operating in pack ice

  9. Hyper-Real-Time Ice Simulation and Modeling Using GPGPU

    E-Print Network [OSTI]

    Peters, Dennis

    Hyper-Real-Time Ice Simulation and Modeling Using GPGPU By c Shadi Alawneh, B. Eng., M. Eng's, Newfoundland Title: Hyper-Real-Time Ice Simulation and Modeling Using GPGPU Author: Shadi Alawneh, B. Eng operating in pack ice is a computationally in- tensive process to which General Purpose Computing

  10. Introduction Microorganisms in sea ice function ecologically in the

    E-Print Network [OSTI]

    Stewart, Frank

    where pelagic and sea ice habitats are intrinsically coupled (Laws 1985, Garrison 1991, Eicken 1992, Knox 1994, Garrison & Mathot 1996, Arrigo et al. 1997, Brierley & Thomas 2002). For instance, sea ice algae - primarily diatoms and phototrophic flagellates (e.g. Garrison 1991) - are inocula for ice

  11. Electric machine for hybrid motor vehicle

    DOE Patents [OSTI]

    Hsu, John Sheungchun (Oak Ridge, TN)

    2007-09-18

    A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

  12. 29April2011JohnLearnedatIceCubeDedication1 IceCube Dedication Symposium, Madison, Wisconsin

    E-Print Network [OSTI]

    Learned, John

    29April2011JohnLearnedatIceCubeDedication1 IceCube Dedication Symposium, Madison, Wisconsin 29 of Neutrino Studies #12;"Talking to the neighbors" 29April2011JohnLearnedatIceCubeDedication2 "A modest://www.economist.com/PrinterFriendly.cfm?story_id=18526871 Not what this talk is about.... SETI with Neutrinos #12;29April2011JohnLearnedatIceCubeDedication3

  13. Machinability study of Aermet 100

    SciTech Connect (OSTI)

    Squire, D.V.; Syn, C.K.; Fix, B.L.

    1995-02-08

    Machinability of Aermet 100, an ultrahigh strength alloy developed for Navy by Carpenter Technology as a candidate material for aircraft landing gear application, was studied by performing single-point turning tests. Coated and uncoated carbides, ceramic, and cermet cutting tool inserts of a square geometry (SNG 432 type) were used. Round stock workpieces were tested in the as - received, unaged condition and without using any cutting fluid. The turning tests for each tool material were conducted by (i) first establishing the cutting conditions that would allow the continued generation of broken chips during a given cutting test, (ii) measuring intermittently the flank wear as a function of cutting time under such established cutting conditions for discontinuous broken chips, and (iii) determining the tool life using the criteria specified in the ISO Standard 3685: 1993(E). Cutting tools except some uncoated carbide and ceramic were used with a mechanical chip breaker to induce chip breakage and avoid the generation of long continuous chips. The results obtained include the optimal cutting conditions for discontinuous chips, tool wear - cutting time curves, and records of tool life and tool failure mode for each tool material. From the measured tool life and cutting conditions, the amount of material removed by each cutting material was calculated. Coated carbide with CVD tri-phase coating showed the longest tool life that exceeded the twelve minute criterion and removed the highest amount of material per tool. Other tools failed by cutting edge chipping and their lives were shorter.

  14. Decadal scale variations in ice flow along Whillans Ice Stream and its tributaries, West Antarctica

    E-Print Network [OSTI]

    Stearns, Leigh; Jezek, Kenneth C.; van der Veen, Cornelis J.

    2005-01-05

    We investigate velocity changes occurring along Whillans Ice Stream (WIS) by comparing velocities derived from repeat aerial photographs acquired in 1985–89 (average date of 1987) to interferometric satellite radar (InSAR) ...

  15. Decadal-scale variations in ice flow along Whillans Ice Stream and its tributaries, West Antarctica

    E-Print Network [OSTI]

    Stearns, Leigh; Jezek, K.A.; van der Veen, Cornelis J.

    2005-01-01

    We investigate velocity changes occurring along Whillans Ice Stream (WIS) by comparing velocities derived from repeat aerial photographs acquired in 1985–89 (average date of 1987) to interferometric satellite radar (InSAR) ...

  16. Focused synthetic aperture radar processing of ice-sounder data collected over the Greenland ice sheet

    E-Print Network [OSTI]

    Legarsky, J.; Gogineni, Sivaprasad; Akins, T. L.

    2001-10-01

    We developed a synthetic aperture radar (SAR) processing algorithm for airborne/spaceborne ice-sounding radar systems and applied it to data collected in Greenland. By using focused SAR (phase-corrected coherent averaging), we improved along...

  17. Prediction of lake ice in the Netherlands

    E-Print Network [OSTI]

    Haak, Hein

    by HARMONIE ·Flake driven by ECMWF ensembles ·Conclusions and Outlook #12;Lake workshop sept 2012 Motivation Operational Observations ECMWF model #12;Lake workshop sept 2012 h D Air Water Ice ·Surface energy ·Radiative fluxes (Qs, Ql, absorbed solar radiation) ·Turbulent fluxes (sensible and latent heat fluxes

  18. Ice-volcano interactions Eyjafjallajkull volcano, Iceland

    E-Print Network [OSTI]

    Berthier, Etienne

    Ice-volcano interactions in Eyjafjallajökull volcano, Iceland Eyjólfur Magnússon1, Magnús Tumi Sciences, University of Iceland, Reykjavík, Iceland 2. Institute of Earth Sciences, University of Iceland, Reykjavík, Iceland 3. Icelandic Coast Guard SPIRIT workshop 29&30 April 2010, Toulouse Picture by Eyjólfur

  19. 6.867 Machine Learning, Fall 2002

    E-Print Network [OSTI]

    Jaakkola, Tommi S. (Tommi Sakari)

    Principles, techniques, and algorithms in machine learning from the point of view of statistical inference; representation, generalization, and model selection; and methods such as linear/additive models, active learning, ...

  20. Growth machine theory: a qualitative analysis 

    E-Print Network [OSTI]

    Smith, Gavin Paul

    1993-01-01

    of land inherent in growth machine theory, does not necessarily result in a dialectic, win-lose situation. Furthermore, it is argued that the growth coalition may not always ado t a unidimensional roach to development where further growth...

  1. Passive machine augmented composite for multifunctional properties 

    E-Print Network [OSTI]

    Kim, Jong Hyun

    2005-11-01

    This dissertation studies by experiment and numerical analysis an advanced composite material (Machine Augmented Composite or MAC) for enhancement of the passive damping while maintaining its stiffness. This MAC is composed of a pre-buckled wall...

  2. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01

    in context with the energy consumption data. 4.2. Reasoning:to decrease energy consumption, energy data has to be placedthe energy consumption and operational data of machine tools

  3. Non-equilibrium quantum heat machines

    E-Print Network [OSTI]

    Rober Alicki; David Gelbwaser-Klimovsky

    2015-07-07

    Standard heat machines (engine, heat pump, refrigerator) are composed of a system ("working fluid") coupled to at least two equilibrium baths at different temperatures and periodically driven by an external device (piston or rotor) called sometimes work reservoir. The aim of this paper is to go beyond this scheme by considering environments which are stationary but cannot be decomposed into few baths at thermal equilibrium. Such situations are important, for example in solar cells, chemical machines in biology, various realizations of laser cooling or nanoscopic machines driven by laser radiation. We classify non-equilibrium baths depending on their thermodynamic behavior and show that the efficiency of heat machines operating under their influences is limited by a generalized Carnot bound.

  4. Use of virtual machines in information systems

    E-Print Network [OSTI]

    Donovan, John J.

    1975-01-01

    This paper presents a scheme using the virtual machine concept for creating: 1) An environment for increasing the effectiveness of researchers who must use analytical, modeling systems and have complex data management ...

  5. Transition metal complex-based molecular machines 

    E-Print Network [OSTI]

    Sooksawat, Dhassida

    2015-06-30

    Inspired by the performance and evolutionarily-optimised natural molecular machines that carry out all the essential tasks contributing to the molecular basis of life, chemists aim towards fabricating synthetic molecular ...

  6. Finite state machines from feature grammars 

    E-Print Network [OSTI]

    Black, Alan W

    1989-01-01

    This paper describes the conversion of a set of feature grammar rules into a deterministic finite state machine that accepts the same language (or at least a well-defined related language).

  7. Reliability improvement project decision making : water cooling system redesign

    E-Print Network [OSTI]

    Devine, Paul (Paul S.)

    2006-01-01

    Deciding on which reliability & performance improvement projects to launch or to reject has historically been an extremely challenging responsibility of Teradyne management. Incorrect decisions can lead to major customer ...

  8. An Improved Simple Chilled Water Cooling Coil Model

    E-Print Network [OSTI]

    Wang, Liping

    2014-01-01

    in HVAC systems couple air and water (or refrigerant) loops.UA int for typical design air and water speeds derived fromthe ratio of the water-side to the air-side conductance at

  9. Heat Recovery From Arc Furnaces Using Water Cooled Panels 

    E-Print Network [OSTI]

    Darby, D. F.

    1987-01-01

    located on the intake air side of the gas burners. From the heat/vent units, the glycol is re turned via the glycol return piping (GWHR) to the secondary side of the water to glycol heat exchanger HE-I, and then back to the surge tank. The system... stream_source_info ESL-IE-87-09-17.pdf.txt stream_content_type text/plain stream_size 21344 Content-Encoding ISO-8859-1 stream_name ESL-IE-87-09-17.pdf.txt Content-Type text/plain; charset=ISO-8859-1 HEAT RECOVERY FROM...

  10. Covered Product Category: Water-Cooled Electric Chillers | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department of Energy Whole-Home Gas Tankless WaterEnergy Electric

  11. Direct Water-Cooled Power Electronics Substrate Packaging | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8,Department of Energy2

  12. Teleportation using continuous variable quantum cloning machine

    E-Print Network [OSTI]

    Satyabrata Adhikari

    2008-02-15

    We show that an unknown quantum state in phase space can be teleported via three-mode entanglement generated by continuous variable quantum cloning machine (transformation). Further, proceeding with our teleportation protocol we are able to improve the fidelity of teleportation obtained by Loock et.al. [Phys.Rev.Lett. 84, 3482(2000)]. Also we study here the entanglement between the two output copies from cloning machine.

  13. Machine Learning for Precise Quantum Measurement

    E-Print Network [OSTI]

    Alexander Hentschel; Barry C. Sanders

    2010-02-25

    Adaptive feedback schemes are promising for quantum-enhanced measurements yet are complicated to design. Machine learning can autonomously generate algorithms in a classical setting. Here we adapt machine learning for quantum information and use our framework to generate autonomous adaptive feedback schemes for quantum measurement. In particular our approach replaces guesswork in quantum measurement by a logical, fully-automatic, programmable routine. We show that our method yields schemes that outperform the best known adaptive scheme for interferometric phase estimation.

  14. Method of fabricating a micro machine

    DOE Patents [OSTI]

    Stalford, Harold L

    2014-11-11

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  15. MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion

    E-Print Network [OSTI]

    Antsaklis, Panos

    MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

  16. NC machine tool path generation from CSG part

    E-Print Network [OSTI]

    Bobrow, James E.

    NC machine tool path generation from CSG part representations James E Bobrow Recent improvements for machine tool path generation. Current machining algorithms require that any port geometric information modelling system is used. Thispaper presents o method for generating numerically-controlled milling machine

  17. On-Line Machine Covering Yossi Azar1

    E-Print Network [OSTI]

    Azar, Yossi

    On-Line Machine Covering Yossi Azar1 ,Leah Epstein2 1 Dept. of Computer Science, Tel of scheduling a sequence of jobs to m parallel machines as to maximize the minimum load over the machines. This situation corresponds to a case that a system which consists of the m machines is alive (i.e. productive

  18. Use of a Machine Control & Guidance System Determination of Performance

    E-Print Network [OSTI]

    1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

  19. this version: May 13, 2011 A semantic virtual machine

    E-Print Network [OSTI]

    Neumaier, Arnold

    this version: May 13, 2011 A semantic virtual machine Arnold Neumaier Peter Schodl Fakult¨at f://www.mat.univie.ac.at/neum/FMathL Abstract A semantic virtual machine (SVM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler

  20. this version: July 7, 2009 A semantic Turing machine

    E-Print Network [OSTI]

    Neumaier, Arnold

    this version: July 7, 2009 A semantic Turing machine Arnold Neumaier Peter Schodl Fakultät für machine (STM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler-style programming language and a user

  1. Modeling the Fracture of Ice Sheets on Parallel Computers

    SciTech Connect (OSTI)

    Waisman, Haim; Tuminaro, Ray

    2013-10-10

    The objective of this project was to investigate the complex fracture of ice and understand its role within larger ice sheet simulations and global climate change. This objective was achieved by developing novel physics based models for ice, novel numerical tools to enable the modeling of the physics and by collaboration with the ice community experts. At the present time, ice fracture is not explicitly considered within ice sheet models due in part to large computational costs associated with the accurate modeling of this complex phenomena. However, fracture not only plays an extremely important role in regional behavior but also influences ice dynamics over much larger zones in ways that are currently not well understood. To this end, our research findings through this project offers significant advancement to the field and closes a large gap of knowledge in understanding and modeling the fracture of ice sheets in the polar regions. Thus, we believe that our objective has been achieved and our research accomplishments are significant. This is corroborated through a set of published papers, posters and presentations at technical conferences in the field. In particular significant progress has been made in the mechanics of ice, fracture of ice sheets and ice shelves in polar regions and sophisticated numerical methods that enable the solution of the physics in an efficient way.

  2. Machine plumbness criteria: Interim technology release

    SciTech Connect (OSTI)

    Not Available

    1987-06-01

    The objective of this technology release is to define the maximum allowable deviation from plumb of the centrifuge machine and to recommend machine installation techniques to achieve the specified criteria. The centrifuge feature used as a reference for plumbness is the casing centerline as defined by a line drawn between the theoretical centers of the top and bottom flange faces. In practice, this measurement is accomplished by using specified casing flange diameters or bolt patterns as the reference points. The criterion adopted for GCEP is that each machine shall be plumb within 0.5 in. over the length of the casing as initially installed. Over a long period of time the plumbness is allowed to degrade to 1.0 in. This standard should be achievable using the currently planned installation techniques and within a time limit consistent with GCEP operational objectives. For development testing, centrifuge machines are meticulously adjusted using a plumb bob to achieve a plumbness with 1/8 in. About one to two days are required to complete the installation. This level of effort is justified for a development machine especially where baseline data is being gathered. A more reasonable standard with a corresponding reduction in installation time is required for GCEP. The specified criteria of 0.5 in. maximum out-of-plumb at time of installation and 1.0 in., ultimate, are believed to be a reasonable compromise. Machine design features or operating modes that are dependent on vertical alignment were examined to assess the impact of the selected plumbness criteria. Machine performance and design requirements are defined in the applicable technology release documents.

  3. Baseline Test Specimen Machining Report

    SciTech Connect (OSTI)

    mark Carroll

    2009-08-01

    The Next Generation Nuclear Plant (NGNP) Project is tasked with selecting a high temperature gas reactor technology that will be capable of generating electricity and supplying large amounts of process heat. The NGNP is presently being designed as a helium-cooled high temperature gas reactor (HTGR) with a large graphite core. The graphite baseline characterization project is conducting the research and development (R&D) activities deemed necessary to fully qualify nuclear-grade graphite for use in the NGNP reactor. Establishing nonirradiated thermomechanical and thermophysical properties by characterizing lot-to-lot and billet-to-billet variations (for probabilistic baseline data needs) through extensive data collection and statistical analysis is one of the major fundamental objectives of the project. The reactor core will be made up of stacks of graphite moderator blocks. In order to gain a more comprehensive understanding of the varying characteristics in a wide range of suitable graphites, any of which can be classified as “nuclear grade,” an experimental program has been initiated to develop an extensive database of the baseline characteristics of numerous candidate graphites. Various factors known to affect the properties of graphite will be investigated, including specimen size, spatial location within a graphite billet, specimen orientation within a billet (either parallel to [P] or transverse to [T] the long axis of the as-produced billet), and billet-to-billet variations within a lot or across different production lots. Because each data point is based on a certain position within a given billet of graphite, particular attention must be paid to the traceability of each specimen and its spatial location and orientation within each billet. The evaluation of these properties is discussed in the Graphite Technology Development Plan (Windes et. al, 2007). One of the key components in the evaluation of these graphite types will be mechanical testing on specimens drawn from carefully controlled sections of each billet. To this end, this report will discuss the machining of the first set of test specimens that will be evaluated in this program through tensile, compressive, and flexural testing. Validation that the test specimens have been produced to the tolerances required by the applicable ASTM standards, and to the quality control levels required by this program, will demonstrate the viability of sending graphite to selected suppliers that will provide valuable and certifiable data to future data sets that are integral to the NGNP program and beyond.

  4. 4/5/2004 JHU-APL 1 Machine LearningMachine Learning

    E-Print Network [OSTI]

    Chang, Edward Y.

    4/5/2004 JHU-APL 1 Machine LearningMachine Learning forfor Image RetrievalImage Retrieval Edward Chang Associate Professor, Electrical Engineering, UC Santa Barbara CTO, VIMA Technologies #12;4/5/2004 JHU-APL 2 Are They Similar? #12;4/5/2004 JHU-APL 3 Are They Similar? In terms of what? Is Tiger Woods

  5. Energy efficient wireless unicast routing alternatives for machine-to-machine networks

    E-Print Network [OSTI]

    Uysal-Biyikoglu, Elif

    Review Energy efficient wireless unicast routing alternatives for machine-to-machine networks Neyre: Energy-efficient routing Shortest-path routing Energy-efficient networks M2M M2M applications M2M for large- scale networking of devices without dependence on human interaction. Energy efficiency is one

  6. Machine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton

    E-Print Network [OSTI]

    Shelton, Christian R.

    to the study of artificial and biological vision. In the last few years both computer vision -- which attemptsMachine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton Center of intelligence, both biological and artificial. In this paper we review our work over the last ten years

  7. Machine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton

    E-Print Network [OSTI]

    Shelton, Christian R.

    to the study of artificial and biological vision. In the last few years both computer vision ­ which attemptsMachine Learning, Machine Vision, and the Brain Tomaso Poggio and Christian R. Shelton Center of intelligence, both biological and artificial. In this paper we review our work over the last ten years

  8. Atom addition reactions in interstellar ice analogues

    E-Print Network [OSTI]

    Linnartz, Harold; Fedoseev, Gleb

    2015-01-01

    This review paper summarizes the state-of-the-art in laboratory based interstellar ice chemistry. The focus is on atom addition reactions, illustrating how water, carbon dioxide and methanol can form in the solid state at astronomically relevant temperatures, and also the formation of more complex species such as hydroxylamine, an important prebiotic molecule, and glycolaldehyde, the smallest sugar, is discussed. These reactions are particularly relevant during the dark ages of star and planet formation, i.e., when the role of UV light is restricted. A quantitative characterization of such processes is only possible through dedicated laboratory studies, i.e., under full control of a large set of parameters such as temperature, atom-flux, and ice morphology. The resulting numbers, physical and chemical constants, e.g., barrier heights, reaction rates and branching ratios, provide information on the molecular processes at work and are needed as input for astrochemical models, in order to bridge the timescales t...

  9. Should we geoengineer larger ice caps?

    E-Print Network [OSTI]

    Haqq-Misra, Jacob

    2015-01-01

    The climate of Earth is susceptible to catastrophes that could threaten the longevity of human civilization. Geoengineering to reduce incoming solar radiation has been suggested as a way to mediate the warming effects of contemporary climate change, but a geoengineering program for thousands of years could also be used to enlarge the size of the polar ice caps and create a permanently cooler climate. Such a large ice cap state would make Earth less susceptible to climate threats and could allow human civilization to survive further into the future than otherwise possible. Intentionally extending Earth's glacial coverage will require uninterrupted commitment to this program for millenia but would ultimately reach a cooler equilibrium state where geoengineering is no longer needed. Whether or not this program is ever attempted, this concept illustrates the need to identify preference among potential climate states to ensure the long-term success of civilization.

  10. Large Scale Ice Water Path and 3-D Ice Water Content

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Liu, Guosheng

    2008-01-15

    Cloud ice water concentration is one of the most important, yet poorly observed, cloud properties. Developing physical parameterizations used in general circulation models through single-column modeling is one of the key foci of the ARM program. In addition to the vertical profiles of temperature, water vapor and condensed water at the model grids, large-scale horizontal advective tendencies of these variables are also required as forcing terms in the single-column models. Observed horizontal advection of condensed water has not been available because the radar/lidar/radiometer observations at the ARM site are single-point measurement, therefore, do not provide horizontal distribution of condensed water. The intention of this product is to provide large-scale distribution of cloud ice water by merging available surface and satellite measurements. The satellite cloud ice water algorithm uses ARM ground-based measurements as baseline, produces datasets for 3-D cloud ice water distributions in a 10 deg x 10 deg area near ARM site. The approach of the study is to expand a (surface) point measurement to an (satellite) areal measurement. That is, this study takes the advantage of the high quality cloud measurements at the point of ARM site. We use the cloud characteristics derived from the point measurement to guide/constrain satellite retrieval, then use the satellite algorithm to derive the cloud ice water distributions within an area, i.e., 10 deg x 10 deg centered at ARM site.

  11. Large Scale Ice Water Path and 3-D Ice Water Content

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Liu, Guosheng

    Cloud ice water concentration is one of the most important, yet poorly observed, cloud properties. Developing physical parameterizations used in general circulation models through single-column modeling is one of the key foci of the ARM program. In addition to the vertical profiles of temperature, water vapor and condensed water at the model grids, large-scale horizontal advective tendencies of these variables are also required as forcing terms in the single-column models. Observed horizontal advection of condensed water has not been available because the radar/lidar/radiometer observations at the ARM site are single-point measurement, therefore, do not provide horizontal distribution of condensed water. The intention of this product is to provide large-scale distribution of cloud ice water by merging available surface and satellite measurements. The satellite cloud ice water algorithm uses ARM ground-based measurements as baseline, produces datasets for 3-D cloud ice water distributions in a 10 deg x 10 deg area near ARM site. The approach of the study is to expand a (surface) point measurement to an (satellite) areal measurement. That is, this study takes the advantage of the high quality cloud measurements at the point of ARM site. We use the cloud characteristics derived from the point measurement to guide/constrain satellite retrieval, then use the satellite algorithm to derive the cloud ice water distributions within an area, i.e., 10 deg x 10 deg centered at ARM site.

  12. Drilling deep in South Pole Ice

    E-Print Network [OSTI]

    Karg, Timo

    2014-01-01

    To detect the tiny flux of ultra-high energy neutrinos from active galactic nuclei or from interactions of highest energy cosmic rays with the microwave background photons needs target masses of the order of several hundred cubic kilometers. Clear Antarctic ice has been discussed as a favorable material for hybrid detection of optical, radio and acoustic signals from ultra-high energy neutrino interactions. To apply these technologies at the adequate scale hundreds of holes have to be drilled in the ice down to depths of about 2500 m to deploy the corresponding sensors. To do this on a reasonable time scale is impossible with presently available tools. Remote drilling and deployment schemes have to be developed to make such a detector design reality. After a short discussion of the status of modern hot water drilling we present here a design of an autonomous melting probe, tested 50 years ago to reach a depth of about 1000 m in Greenland ice. A scenario how to build such a probe today with modern technologies...

  13. Resonant vibrational energy transfer in ice Ih

    SciTech Connect (OSTI)

    Shi, L.; Li, F.; Skinner, J. L.

    2014-06-28

    Fascinating anisotropy decay experiments have recently been performed on H{sub 2}O ice Ih by Timmer and Bakker [R. L. A. Timmer, and H. J. Bakker, J. Phys. Chem. A 114, 4148 (2010)]. The very fast decay (on the order of 100 fs) is indicative of resonant energy transfer between OH stretches on different molecules. Isotope dilution experiments with deuterium show a dramatic dependence on the hydrogen mole fraction, which confirms the energy transfer picture. Timmer and Bakker have interpreted the experiments with a Förster incoherent hopping model, finding that energy transfer within the first solvation shell dominates the relaxation process. We have developed a microscopic theory of vibrational spectroscopy of water and ice, and herein we use this theory to calculate the anisotropy decay in ice as a function of hydrogen mole fraction. We obtain very good agreement with experiment. Interpretation of our results shows that four nearest-neighbor acceptors dominate the energy transfer, and that while the incoherent hopping picture is qualitatively correct, vibrational energy transport is partially coherent on the relevant timescale.

  14. A radio air shower surface detector as an extension for IceCube and IceTop

    E-Print Network [OSTI]

    J. Auffenberg; T. Gaisser; K. Helbing; T. Huege; T. Karg; A. Karle

    2007-08-24

    The IceCube neutrino detector is built into the Antarctic ice sheet at the South Pole to measure high energy neutrinos. For this, 4800 photomultiplier tubes (PMTs) are being deployed at depths between 1450 and 2450 meters into the ice to measure neutrino induced charged particles like muons. IceTop is a surface air shower detector consisting of 160 Cherenkov ice tanks located on top of IceCube. To extend IceTop, a radio air shower detector could be built to significantly increase the sensitivity at higher shower energies and for inclined showers. As air showers induced by cosmic rays are a major part of the muonic background in IceCube, IceTop is not only an air shower detector, but also a veto to reduce the background in IceCube. Air showers are detectable by radio signals with a radio surface detector. The major emission process is the coherent synchrotron radiation emitted by e+ e- shower particles in the Earths magnetic field (geosynchrotron effect). Simulations of the expected radio signals of air showers are shown. The sensitivity and the energy threshold of different antenna field configurations are estimated.

  15. IceVeto: Extended PeV neutrino astronomy in the Southern Hemisphere with IceCube

    SciTech Connect (OSTI)

    Auffenberg, Jan; Collaboration: IceCube Collaboration

    2014-11-18

    IceCube, the world's largest high-energy neutrino observatory, built at the South Pole, recently reported evidence of an astrophysical neutrino flux extending to PeV energies in the Southern Hemisphere. This observation raises the question of how the sensitivity in this energy range could be further increased. In the down-going sector, in IceCube's case the Southern Hemisphere, backgrounds from atmospheric muons and neutrinos pose a challenge to the identification of an astrophysical neutrino flux. The IceCube analysis, that led to the evidence for astrophysical neutrinos, is based on an in-ice veto strategy for background rejection. One possibility available to IceCube is the concept of an extended surface detector, IceVeto, which could allow the rejection of a large fraction of atmospheric backgrounds, primarily for muons from cosmic ray (CR) air showers as well as from neutrinos in the same air showers. Building on the experience of IceTop/IceCube, possibly the most cost-effective and sensitive way to build IceVeto is as an extension of the IceTop detector, with simple photomultiplier based detector modules for CR air shower detection. Initial simulations and estimates indicate that such a veto detector will significantly increase the sensitivity to an astrophysical flux of ?{sub ?} induced muon tracks in the Southern Hemisphere compared to current analyses. Here we present the motivation and capabilities based on initial simulations. Conceptual ideas for a simplified surface array will be discussed briefly.

  16. Micro-machined thermo-conductivity detector

    DOE Patents [OSTI]

    Yu, Conrad (Antioch, CA)

    2003-01-01

    A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

  17. Automatic feed system for ultrasonic machining

    DOE Patents [OSTI]

    Calkins, Noel C. (Los Alamos, NM)

    1994-01-01

    Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

  18. Multi-winding homopolar electric machine

    DOE Patents [OSTI]

    Van Neste, Charles W

    2012-10-16

    A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

  19. ORIGINAL PAPER Sedimentary pellets as an ice-cover proxy in a High Arctic

    E-Print Network [OSTI]

    Vincent, Warwick F.

    ORIGINAL PAPER Sedimentary pellets as an ice-cover proxy in a High Arctic ice-covered lake Jessica-cover extent and dynamics on this perennially ice-covered, High Arctic lake. These pellets are interpreted growth. The pellets remain frozen in the ice until a summer or series of summers with reduced ice cover

  20. Glacial conditions that contribute to the regeneration of Fountain Glacier proglacial icing, Bylot Island, Canada

    E-Print Network [OSTI]

    Moorman, Brian

    Glacial conditions that contribute to the regeneration of Fountain Glacier proglacial icing, Bylot icings are one of the most common forms of extrusive ice found in the Canadian Arctic. However, the icing. Its regeneration depends on the availability of subglacial water and on the balance between ice

  1. Diagnostics for machine protection of DEMO

    SciTech Connect (OSTI)

    Felton, R.

    2014-08-21

    DEMO aims to (i) integrate, demonstrate and validate all relevant technology necessary to convert fusion energy to electrical energy and (ii) that the machine and its operations are economically and environmentally acceptable. To maintain the efficiency and availability of the machine, there are several physics and combined physics/technology issues as well as the engineering issues. Machine Protection (also known as Protection of Investment) addresses both the risks to plant (to avoid costly repair or replacement) and the risks to normal operating time (to avoid loss of productivity and the return on investment). The plasma-related Machine Protection issues involve measurement and control of plasma stability, plasma purity, and plasma-wall interactions. Machine Protection aims to avoid hitting catastrophic limits by using early warning alarm systems, and controlled termination or avoidance, involving coordinated actions of the magnets, gas and auxiliary heating or current-drive systems. This article outlines the key processes, some of which are used in present-day tokamaks and some of which are new specifically for DEMO (e.g. First wall and divertor power handling) and reveals the need to research and develop new science and technology for Machine Protections in DEMO's high radiation and thermal fields. This work was funded by the RCUK Energy Programme under grant EP/I501045 and the European Communities under the contract of Association between EURATOM and CCFE and conducted partly under EFDA PPPT (WP13-DAS04). The views and opinions expressed herein do not necessarily reflect those of the European Commission.

  2. Ising model for melt ponds on Arctic sea ice

    E-Print Network [OSTI]

    Ma, Y -P; Golden, K M

    2014-01-01

    The albedo of melting Arctic sea ice, a key parameter in climate modeling, is determined by pools of water on the ice surface. Recent observations show an onset of pond complexity at a critical area of about 100 square meters, attended by a transition in pond fractal dimension. To explain this behavior and provide a statistical physics approach to sea ice modeling, we introduce a two dimensional Ising model for pond evolution which incorporates ice-albedo feedback and the underlying thermodynamics. The binary magnetic spin variables in the Ising model correspond to the presence of melt water or ice on the sea ice surface. The model exhibits a second-order phase transition from isolated to clustered melt ponds, with the evolution of pond complexity in the clustered phase consistent with the observations.

  3. Efficient dynamic synchronous machine simulation with harmonics

    SciTech Connect (OSTI)

    Haskew, T.A.; Stern, H.P.; Chen, Z. [Univ. of Alabama, Tuscaloosa, AL (United States). Dept. of Electrical Engineering] [Univ. of Alabama, Tuscaloosa, AL (United States). Dept. of Electrical Engineering

    1996-06-01

    Within this paper, an efficient procedure for the dynamic simulation of faulted synchronous machines operating in the presence of harmonics is presented. The algorithm employs steady-state frequency domain techniques for simulation of the transmission system sequence networks and time domain methods for the synchronous machines represented in the odq frame of reference. The procedure affords greater accuracy than conventional fault analysis techniques based strictly on steady-state methods, yet requires far less computational time than full system dynamic simulations such as those using the EMTP.

  4. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  5. High slot utilization systems for electric machines

    DOE Patents [OSTI]

    Hsu, John S (Oak Ridge, TN)

    2009-06-23

    Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

  6. Apparatus for cooling an electric machine

    SciTech Connect (OSTI)

    Palafox, Pepe; Gerstler, William Dwight; Shen, Xiaochun; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Salasoo, Lembit

    2013-07-16

    Provided is an apparatus, for example, for use with a rotating electric machine, that includes a housing. The housing can include a housing main portion and a housing end portion. The housing main portion can be configured to be disposed proximal to a body portion of a stator section of an electric machine. The housing main portion can define a main fluid channel that is configured to conduct fluid therethrough. The housing end portion can receive fluid from said main fluid channel and direct fluid into contact with a winding end portion of a conductive winding of the stator section.

  7. 20130416_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-04-24

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  8. Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-07-15

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  9. 20140430_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    2014-05-05

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  10. Green Machine Florida Canyon Hourly Data 20130731

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    2013-08-30

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  11. Methods and apparatus for controlling rotary machines

    DOE Patents [OSTI]

    Bagepalli, Bharat Sampathkumaran (Niskayuna, NY); Jansen, Patrick Lee (Scotia, NY); Barnes, Gary R. (Delanson, NY); Fric, Thomas Frank (Greer, SC); Lyons, James Patrick Francis (Niskayuna, NY); Pierce, Kirk Gee (Simpsonville, SC); Holley, William Edwin (Greer, SC); Barbu, Corneliu (Guilderland, NY)

    2009-09-01

    A control system for a rotary machine is provided. The rotary machine has at least one rotating member and at least one substantially stationary member positioned such that a clearance gap is defined between a portion of the rotating member and a portion of the substantially stationary member. The control system includes at least one clearance gap dimension measurement apparatus and at least one clearance gap adjustment assembly. The adjustment assembly is coupled in electronic data communication with the measurement apparatus. The control system is configured to process a clearance gap dimension signal and modulate the clearance gap dimension.

  12. Quantum thermal machines with single nonequilibrium environments

    E-Print Network [OSTI]

    Bruno Leggio; Bruno Bellomo; Mauro Antezza

    2015-01-08

    We propose a scheme for a quantum thermal machine made by atoms interacting with a single non-equilibrium electromagnetic field. The field is produced by a simple configuration of macroscopic objects held at thermal equilibrium at different temperatures. We show that these machines can deliver all thermodynamic tasks (cooling, heating and population inversion), and this by establishing quantum coherence with the body on which they act. Remarkably, this system allows to reach efficiencies at maximum power very close to the Carnot limit, much more than in existing models. Our findings offer a new paradigm for efficient quantum energy flux management, and can be relevant for both experimental and technological purposes.

  13. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  14. Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  15. Green Machine Florida Canyon Hourly Data 20130731

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  16. 20130416_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  17. 20140430_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  18. Electric machine and current source inverter drive system

    DOE Patents [OSTI]

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  19. A machine learning approach to automated structural network analysis: Application to neonatal encephalopathy

    E-Print Network [OSTI]

    Ziv, E; Tymofiyeva, O; Ferriero, DM; Barkovich, AJ; Hess, CP; Xu, D

    2013-01-01

    International Conference on Machine Learning. VishwanathanGraph Kernels. Journal of Machine Learning Research 11:to support vector machines: and other kernel-based learning

  20. A machine learning framework for classifying invulnerabilites [sic] and predicting exploitability

    E-Print Network [OSTI]

    Bozorgi, Mehran

    2009-01-01

    Flow . . . 15 Chapter 4 Using Machine Learning for Classi?cation . . . 4.1 Supervised Machine Learning Approach . .with Kernels: Support Vector Machines, Regularization,

  1. Machine Assistance in Collection Building: New Tools, Research, Issues and Reflections

    E-Print Network [OSTI]

    Mitchell, Steve

    2006-01-01

    www.jaist.ac.jp/~tajima/ Machine assistance in collectionInternational Conference on Machine Learning (2004), http://International Conference on Machine Learning (Menlo Park

  2. Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

    2010-01-01

    Environmental Analysis of Milling Machine Tool Use ina standard vertical milling machine tool. In this example,classification is milling machine tools. M I. I NTRODUCTION

  3. Impact of the manufacturing phase on the life cycle of machined products

    E-Print Network [OSTI]

    Diaz, Nancy; Helu, Moneer; Ninomiya, Kevin; Dornfeld, David

    2012-01-01

    2010, Environmental Analysis of Milling Machine Tool Use inReduction Strategies for Milling Machine Tool Use. Proc ofconsumption of a milling machine tool for the production of

  4. Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use

    E-Print Network [OSTI]

    Diaz, Nancy; E. Redelsheimer; Dornfeld, David

    2011-01-01

    2010): Environmental Analysis of Milling Machine Tool Use inand Reduction Strategies for Milling Machine Tool Use Nancythe energy consumption of milling machine tools during their

  5. Meltwater effects on flow of Greenland's ice sheet less severe...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Side effects of increasing meltwater less severe than feared Meltwater effects on flow of Greenland's ice sheet less severe for sea level rise than earlier feared, scientists...

  6. Sandia Energy - NASA Award for Marginal Ice Zone Observations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NASA Award for Marginal Ice Zone Observations and Process Experiment (MIZOPEX) Home Climate Office of Science News News & Events Research & Capabilities Monitoring Analysis...

  7. optimal initial conditions for coupling ice sheet models to earth...

    Office of Scientific and Technical Information (OSTI)

    optimal initial conditions for coupling ice sheet models to earth system models Perego, Mauro Sandia National Laboratories Sandia National Laboratories; Price, Stephen F. Dr...

  8. THE STICKINESS OF MICROMETER-SIZED WATER-ICE PARTICLES

    SciTech Connect (OSTI)

    Gundlach, B.; Blum, J.

    2015-01-01

    Water ice is one of the most abundant materials in dense molecular clouds and in the outer reaches of protoplanetary disks. In contrast to other materials (e.g., silicates), water ice is assumed to be stickier due to its higher specific surface energy, leading to faster or more efficient growth in mutual collisions. However, experiments investigating the stickiness of water ice have been scarce, particularly in the astrophysically relevant micrometer-sized region and at low temperatures. In this work, we present an experimental setup to grow aggregates composed of ?m-sized water-ice particles, which we used to measure the sticking and erosion thresholds of the ice particles at different temperatures between 114 K and 260 K. We show with our experiments that for low temperatures (below ?210 K), ?m-sized water-ice particles stick below a threshold velocity of 9.6 m s{sup –1}, which is approximately 10 times higher than the sticking threshold of ?m-sized silica particles. Furthermore, erosion of the grown ice aggregates is observed for velocities above 15.3 m s{sup –1}. A comparison of the experimentally derived sticking threshold with model predictions is performed to determine important material properties of water ice, i.e., the specific surface energy and the viscous relaxation time. Our experimental results indicate that the presence of water ice in the outer reaches of protoplanetary disks can enhance the growth of planetesimals by direct sticking of particles.

  9. Basal melt rates beneath Whillans Ice Stream, West Antarctica

    E-Print Network [OSTI]

    Beem, Lucas H.; Jezek, Ken C.; van der Veen, Cornelis J.

    2010-08-05

    and J.E. Mitchell. 1994. The role of the margins in the dynamics of an active ice stream. J. Glaciol., 40(136), 527–538. Engelhardt, H. 2004a. Ice temperature and high geothermal flux at Siple Dome, West Antarctica, from borehole measurements. J. Glaciol... ratio which varies laterally across the shear margin. Basal drag, ?b, basal velocity, U(b), basal temperature gradient, @T/@z(b), esti- mates of geothermal flux, G, plus knowledge of basal ice properties, density, ?, latent heat of fusion of ice, Li...

  10. IceCube: An Instrument for Neutrino Astronomy

    E-Print Network [OSTI]

    Halzen, F.

    2010-01-01

    detectors: searching for radio waves or for acoustic pulsespredictions 93 . In cold ice, radio-wave attenuation lengthperfect reflector for radio waves. With this reflection,

  11. Acceleration of Greenland ice mass loss in spring 2004

    E-Print Network [OSTI]

    Velicogna, I; Velicogna, I; Wahr, J

    2006-01-01

    10.1029/ 2005GL025550 (2006). Peltier, W. R. Global glacial2004). Tushingham, A. M. & Peltier, W. R. ICE-3G: A new

  12. IceCube: A Cubic Kilometer Radiation Detector

    E-Print Network [OSTI]

    Klein, S.; IceCube Collaboration

    2008-01-01

    Cubic Kilometer Radiation Detector The IceCube CollaborationA Cubic Kilometer Radiation Detector Spencer R. Klein, forlarge detector is to search for optical Cherenkov radiation

  13. ARM - Field Campaign - SGP Ice Nuclei Characterization Experiment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and their impact on clouds and climate therefore remain relatively unconstrained. Soils of all types and plant surfaces are sources for ice nucleating particles that are...

  14. Reducing uncertainty in high-resolution sea ice models.

    SciTech Connect (OSTI)

    Peterson, Kara J.; Bochev, Pavel Blagoveston

    2013-07-01

    Arctic sea ice is an important component of the global climate system, reflecting a significant amount of solar radiation, insulating the ocean from the atmosphere and influencing ocean circulation by modifying the salinity of the upper ocean. The thickness and extent of Arctic sea ice have shown a significant decline in recent decades with implications for global climate as well as regional geopolitics. Increasing interest in exploration as well as climate feedback effects make predictive mathematical modeling of sea ice a task of tremendous practical import. Satellite data obtained over the last few decades have provided a wealth of information on sea ice motion and deformation. The data clearly show that ice deformation is focused along narrow linear features and this type of deformation is not well-represented in existing models. To improve sea ice dynamics we have incorporated an anisotropic rheology into the Los Alamos National Laboratory global sea ice model, CICE. Sensitivity analyses were performed using the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA) to determine the impact of material parameters on sea ice response functions. Two material strength parameters that exhibited the most significant impact on responses were further analyzed to evaluate their influence on quantitative comparisons between model output and data. The sensitivity analysis along with ten year model runs indicate that while the anisotropic rheology provides some benefit in velocity predictions, additional improvements are required to make this material model a viable alternative for global sea ice simulations.

  15. optimal initial conditions for coupling ice sheet models to earth...

    Office of Scientific and Technical Information (OSTI)

    for coupling ice sheet models to earth system models Authors: Perego, Mauro 1 ; Price, Stephen F. Dr 2 ; Stadler, Georg 3 + Show Author Affiliations Sandia National...

  16. A METHOD FOR AIRCRAFT ICING DIAGNOSIS IN PRECIPITATION

    E-Print Network [OSTI]

    Fabry, Frederic

    A METHOD FOR AIRCRAFT ICING DIAGNOSIS IN PRECIPITATION François A. Turcotte Department precipitation event and its microphysics was simulated using a high resolution three-dimensional kinematic cloud

  17. Radiokrypton Dating Identifies Ancient Antarctic Ice | U.S. DOE...

    Office of Science (SC) Website

    Radiokrypton Dating Identifies Ancient Antarctic Ice Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science...

  18. The role of ice nuclei recycling in the maintenance of cloud ice in Arctic mixed-phase stratocumulus

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Solomon, A.; Feingold, G.; Shupe, M. D.

    2015-09-25

    This study investigates the maintenance of cloud ice production in Arctic mixed-phase stratocumulus in large eddy simulations that include a prognostic ice nuclei (IN) formulation and a diurnal cycle. Balances derived from a mixed-layer model and phase analyses are used to provide insight into buffering mechanisms that maintain ice in these cloud systems. We find that, for the case under investigation, IN recycling through subcloud sublimation considerably prolongs ice production over a multi-day integration. This effective source of IN to the cloud dominates over mixing sources from above or below the cloud-driven mixed layer. Competing feedbacks between dynamical mixing andmore »recycling are found to slow the rate of ice lost from the mixed layer when a diurnal cycle is simulated. The results of this study have important implications for maintaining phase partitioning of cloud ice and liquid that determine the radiative forcing of Arctic mixed-phase clouds.« less

  19. The role of ice nuclei recycling in the maintenance of cloud ice in Arctic mixed-phase stratocumulus

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Solomon, A.; Feingold, G.; Shupe, M. D.

    2015-04-21

    This study investigates the maintenance of cloud ice production in Arctic mixed phase stratocumulus in large-eddy simulations that include a prognostic ice nuclei (IN) formulation and a diurnal cycle. Balances derived from a mixed-layer model and phase analyses are used to provide insight into buffering mechanisms that maintain ice in these cloud systems. We find that for the case under investigation, IN recycling through subcloud sublimation considerably prolongs ice production over a multi-day integration. This effective source of IN to the cloud dominates over mixing sources from above or below the cloud-driven mixed layer. Competing feedbacks between dynamical mixing andmore »recycling are found to slow the rate of ice lost from the mixed layer when a diurnal cycle is simulated. The results of this study have important implications for maintaining phase partitioning of cloud ice and liquid that determine the radiative forcing of Arctic mixed-phase clouds.« less

  20. Iron loss calculation for synchronous reluctance machines

    SciTech Connect (OSTI)

    Leonardi, F.; Matsuo, T.; Lipo, T.A. [Univ. of Wisconsin, Madison, WI (United States)

    1995-12-31

    A numerical method for iron loss calculation is presented in this paper. The method is suitable for any synchronous and most dc machines, especially if the current waveforms are known a priori . This technique will be principally useful for high speed machines and in particular for the synchronous reluctance machines and in particular for the synchronous reluctance machine, where the iron losses are often an important issue. The calculation is based on Finite Element Analysis, which provides the flux density waveforms in the iron, and on the Fourier Analysis of these waveforms. Several Finite Element Simulations are necessary to obtain the induced voltage versus time waveforms. To reduce the post-processing time the majority of the elements of the model are grouped together to create super elements. Also the periodicity of the motor can be used to reduce the number of required simulations. The method is applied to the calculation of the iron losses of a synchronous reluctance generator, and a number of interesting results are discussed in the paper.

  1. A Formulation for Minimax Probability Machine Regression

    E-Print Network [OSTI]

    Grudic, Greg

    A Formulation for Minimax Probability Machine Regression Thomas Strohmann Department of Computer Science University of Colorado, Boulder grudic@cs.colorado.edu Abstract We formulate the regression of the regression model will be within some ± bound of the true regression function. Our formulation is unique

  2. Supercomputer Assisted Generation of Machine Learning Agents

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    is the Defining Challenge of Our Time · Buildings in China ­ 60% of urban building floor space in 2030 has yetSupercomputer Assisted Generation of Machine Learning Agents for the Calibration of Building Energy of Tennessee, Knoxville #12;2 Managed by UT-Battelle for the U.S. Department of Energy Sustainability

  3. Foundations and Trends R Machine Learning

    E-Print Network [OSTI]

    Bengio, Yoshua

    Networks 43 4.6 Auto-Encoders 45 #12;5 Energy-Based Models and Boltzmann Machines 48 5.1 Energy.1561/2200000006 Learning Deep Architectures for AI Yoshua Bengio Dept. IRO, Universit´e de Montr´eal, C.P. 6128, Montreal

  4. Danti with Nuclear Magnetic Resonance Machine 

    E-Print Network [OSTI]

    Unknown

    2011-08-17

    Detailed field measurements of energy consumption (kWh) and demand (kW) are conducted on two injection molding machines (IMMs) used in a typical plastic manufacturing facility in the San Francisco Bay Area, with/without Variable Frequency Drives...

  5. Synchronous Machines 1.0 Introduction

    E-Print Network [OSTI]

    McCalley, James D.

    1 Synchronous Machines 1.0 Introduction One might easily argue that the synchronous generator is the most important component in the power system, since synchronous generators · Are the source of 99 the remainder of the course studying this component. EE 303 contains a chapter on synchronous generators (Module

  6. The Nonnegative Boltzmann Machine Oliver B. Downs

    E-Print Network [OSTI]

    MacKay, David J.C.

    The Nonnegative Boltzmann Machine Oliver B. Downs Hopfield Group Schultz Building Princeton as on a generative model for images of human faces. Introduction The multivariate Gaussian is the most elementary NNBM distribution. The energy function ˇ˘ˇ for this distribution contains a saddle point and two

  7. The Nonnegative Boltzmann Machine Oliver B. Downs

    E-Print Network [OSTI]

    MacKay, David J.C.

    The Nonnegative Boltzmann Machine Oliver B. Downs Hopfield Group Schultz Building Princeton as on a generative model for images of human faces. Introduction The multivariate Gaussian is the most elementary dimensional competi­ tive NNBM distribution. The energy function E(x) for this distribution contains a saddle

  8. Covered Product Category: Refrigerated Beverage Vending Machines

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including refrigerated beverage vending machines, which are covered by the ENERGY STAR® program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  9. Designing Fusion Machines for High Availability

    E-Print Network [OSTI]

    Designing Fusion Machines for High Availability Tom Brown, Hutch Neilson Princeton Plasma Physics is proportional to (Availability)-1 Rapid removal/replacement of limited-life in-vessel components is a necessary condition for high availability. DEMO will need to show that a fusion plant can operate with high

  10. CSP Theorems for Communicating B Machines

    E-Print Network [OSTI]

    Doran, Simon J.

    CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

  11. Factored Language Models for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Factored Language Models for Statistical Machine Translation Amittai E. Axelrod TH E U N I V E R . . . . . . . . . . . . . . . . . . . . . 10 2.4.3 Log-Linear, Phrase-Based Translation Models . . . . . . . . . 11 3 Statistical Language S ITY OF E D I N B U R G H Master of Science by Research Institute for Communicating and Collaborative

  12. Design of a frozen fruit smoothie machine

    E-Print Network [OSTI]

    Toussaint, Teddy A. (Teddy Antoine)

    2013-01-01

    A smoothie machine known as the FruziFridge is being deterministically designed to dispense frozen fruit smoothies. The design is scalable so it can be made available in homes as a built-in module of a refrigerator or in ...

  13. Class A nal surface nish through machining,

    E-Print Network [OSTI]

    for rapid development and evaluation. The printed car incorporates"plug and play"components such as new the deployment of new vehicles and efficient transportation systems powered by domestic, renewable, clean energy components, hours to machine, and cost 8 4 ~$250 6 concept to drivable car in weeks parts printed in hours

  14. The ATLAS Higgs Machine Learning Challenge

    E-Print Network [OSTI]

    Cowan, Glen; The ATLAS collaboration; Bourdarios, Claire

    2015-01-01

    High Energy Physics has been using Machine Learning techniques (commonly known as Multivariate Analysis) since the 1990s with Artificial Neural Net and more recently with Boosted Decision Trees, Random Forest etc. Meanwhile, Machine Learning has become a full blown field of computer science. With the emergence of Big Data, data scientists are developing new Machine Learning algorithms to extract meaning from large heterogeneous data. HEP has exciting and difficult problems like the extraction of the Higgs boson signal, and at the same time data scientists have advanced algorithms: the goal of the HiggsML project was to bring the two together by a “challenge”: participants from all over the world and any scientific background could compete online to obtain the best Higgs to tau tau signal significance on a set of ATLAS fully simulated Monte Carlo signal and background. Instead of HEP physicists browsing through machine learning papers and trying to infer which new algorithms might be useful for HEP, then c...

  15. Effective stress profiles and seepage flows beneath glaciers and ice sheets

    E-Print Network [OSTI]

    Rempel, Alan W.

    stress for ice infiltration Qb Heat flux into glacier base Qf Heat produced by dissipation Qg Geothermal Vertical coordinate Exponent in permeability relation #12; Exponent in ice-saturation relation il Ice

  16. Analytical determination of performance degradation on a helicopter main rotor due to ice accretion 

    E-Print Network [OSTI]

    Camba, Javier

    1986-01-01

    artificial icing tests Canada's National Research Council (NRC) Icing Tunnel and simulated ice tests the OSU Transonic Airfoil Facility using a irfo'1 1 s inbicitave of current rotorcraft technol ogy. The final correlations are: Lift Increment Prediction...

  17. Incorporation of particulates into accreted ice above subglacial Vostok lake, Antarctica 

    E-Print Network [OSTI]

    Siegert, M. J.; Royston-Bishop, G.; Priscu, J. C.; Tranter, M.; Christner, B.; Lee, V.

    2005-01-01

    The nature of microscopic particulates in meteoric and accreted ice from the Vostok (Antarctica) ice core is assessed in conjunction with existing ice-core data to investigate the mechanism by which particulates are ...

  18. Modeling the evolution of polar ice sheets: Ice sheet system model workshop; Bergen, Norway, 2-4 June 2014

    E-Print Network [OSTI]

    Larour, E; Schlegel, N; Morlighem, M

    2014-01-01

    Model Workshop; Bergen, Norway, 2?4 June 2014 The Ice SheetUniversity of Bergen in Norway, in June 2014. This is the

  19. Synchronous Machine Modeling Notes2 1.0 Inductances

    E-Print Network [OSTI]

    McCalley, James D.

    Synchronous Machine Modeling ­ Notes2 1.0 Inductances Recall the relation between flux linkages. Rather, for each coil and coil pair in the synchronous machine, we are going to see if any of the terms

  20. Virtual cutter path display for dental milling machine

    E-Print Network [OSTI]

    Ito, Teruaki

    This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

  1. Models and evaluation of human-machine systems

    E-Print Network [OSTI]

    Bayout Alvarenga, Marco Antonio

    1993-01-01

    The field of human-machine systems and human-machine interfaces is very multidisciplinary. We have to navigate between the knowledge waves brought by several areas of the human learning: cognitive psychology, artificial ...

  2. Power Electronics and Electrical Machines Review, August 2006...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Machines Review, August 2006 Power Electronics and Electrical Machines Review, August 2006 This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and...

  3. Thermal analysis and air flow modelling of electrical machines 

    E-Print Network [OSTI]

    Chong, Yew Chuan

    2015-06-29

    Thermal analysis is an important topic that can affect the electrical machine performance, reliability, lifetime and efficiency. In order to predict the electrical machine thermal performance accurately, thermal analysis ...

  4. Quantum Support Vector Machine for Big Data Classification

    E-Print Network [OSTI]

    Mohseni, Masoud

    Supervised machine learning is the classification of new data based on already classified training examples. In this work, we show that the support vector machine, an optimized binary classifier, can be implemented on a ...

  5. Optimization Problems Related to Zigzag Pocket Machining \\Lambda

    E-Print Network [OSTI]

    Arkin, Estie

    for tool retractions, i.e. for lifting the tool for non­cutting movements. 1 #12; of axes of a milling machine which need to be driven simultaneously in order to accomplish a machining task. The particular

  6. An evaluation of support vector machines in consumer credit analysis

    E-Print Network [OSTI]

    Mattocks, Benjamin A

    2013-01-01

    This thesis examines a support vector machine approach for determining consumer credit. The support vector machine using a radial basis function (RBF) kernel is compared to a previous implementation of a decision tree ...

  7. Using Machine Teaching to Identify Optimal Training-Set Attacks on Machine

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    learning and security: training-set attacks on machine learners. In such attacks an attacker contaminates-set attacks to increase in the future as more intelligent systems (e.g. wearable devices, cars, smart houses

  8. Using Machine Teaching to Identify Optimal Training-Set Attacks on Machine Learners

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    and security: training-set attacks on machine learners. In such attacks an attacker contaminates the training.g. wearable devices, cars, smart houses and robots) include a "life long learning" com- ponent. The attacker

  9. Design of a desktop milling machine for fabrication in an introductory machine shop class

    E-Print Network [OSTI]

    Lorenc, Dan (Daniel P.)

    2010-01-01

    The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

  10. International Conference on Machine Control & Guidance 2008 1 Universal Developer Platform for Machine Control

    E-Print Network [OSTI]

    . Furthermore 1D, 2D or 3D guidance or control of complex machinery generally includes heavy and diverse (design) · display hints (for guidance) or control actuators (e.g. engines or valves) 2 MACHINE AUTOMATION

  11. Global Tunnel Boring Machine Industry 2015 Market Research Report...

    Open Energy Info (EERE)

    Global Tunnel Boring Machine Industry 2015 Market Research Report Home There are currently no posts in this category. Syndicate content...

  12. Machine Learning, Quantum Mechanics, and Chemical Compound Space

    E-Print Network [OSTI]

    Ramakrishnan, Raghunathan

    2015-01-01

    We review recent studies dealing with the generation of machine learning models of molecular and solid properties.

  13. H2 ICE Combustion | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-Dose Lowď‚— WeUpdate JonGuided 8/12/15GuyH2 ICE Combustion

  14. Ice in Arctic Mixed-phase Stratocumulus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein KhalilResearch88 Sign In AboutWorkshop:Ice Nuclei

  15. Southern Great Plains Ice Nuclei Characterization Experiment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation ofAlbuquerque|Sensitive Species3performedValleySouthern Great Plains Ice Nuclei

  16. From Continuation Passing Style to Krivine's Abstract Machine

    E-Print Network [OSTI]

    Selinger, Peter

    From Continuation Passing Style to Krivine's Abstract Machine Peter Selinger Department different extensions of typed lambda calculus, how the rules for a version of Krivine's abstract machine can-in types and primitive functions. We also show how Krivine's abstract machine can be implemented

  17. Techniac and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Techniac and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 3 and Cost Assessment of the PCAST Machine - Final Report - Volume II Chapter 3.0 - Engineering Chapter 4 175 183 z 207 z #12;#12;Chapter 3 Engineering Design of the PCAST Machine Introduction (J. Schmidt, J

  18. MACHINE LEARNING METHODS WITHOUT TEARS: A PRIMER FOR ECOLOGISTS

    E-Print Network [OSTI]

    Poff, N. LeRoy

    MACHINE LEARNING METHODS WITHOUT TEARS: A PRIMER FOR ECOLOGISTS Julian D. Olden School of Aquatic modeling abstract Machine learning methods, a family of statistical techniques with origins in the field to other disciplines. One potential explanation for this lack of interest is that machine learning

  19. Turing Machine as an ecological model for Task Analysis

    E-Print Network [OSTI]

    Frénod, Emmanuel

    1 Turing Machine as an ecological model for Task Analysis Thierry Morineau, Emmanuel Frénod model is based on the Turing Machine formalism and takes into account the variety of situations that can opening a door. Keywords: Cognitive work analysis, task analysis, Turing machine, affordance #12;3 1

  20. Is Machine Learning the Wrong Name? Xiaojin Zhu

    E-Print Network [OSTI]

    Zhu, Xiaojin "Jerry"

    Is Machine Learning the Wrong Name? Xiaojin Zhu Department of Computer Sciences University of Wisconsin-Madison October 2010 (University of Wisconsin) Is Machine Learning the Wrong Name? 1 / 33 #12;Iris Learns "Cow" (University of Wisconsin) Is Machine Learning the Wrong Name? 2 / 33 #12;Iris Learns "Cow

  1. Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker

    E-Print Network [OSTI]

    Khedker, Uday

    Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

  2. AES Flow Interception : Key Snooping Method on Virtual Machine.

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    AES Flow Interception : Key Snooping Method on Virtual Machine. - Exception Handling Attack for AES for snooping AES en- cryption key on Virtual Machine Monitor (VMM), and we present coun- termeasures against. In general, the virtualization technology composes two software parts: one is vir- tual machine (VM

  3. Technical and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Technical and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 4 an ignition-moderate-burn device smaller and less costly than ITER, the costing for this machine is presented ITER merely used fixed numbers or the data was considered more representative of the PCAST machine

  4. Kernel Machine Based Feature Extraction Algorithms for Regression Problems

    E-Print Network [OSTI]

    Szepesvari, Csaba

    Kernel Machine Based Feature Extraction Algorithms for Regression Problems Csaba Szepesv´ari 1 and Andr´as Kocsor and Korn´el Kov´acs 2 Abstract. In this paper we consider two novel kernel machine based performance of the algorithm. The second algo- rithm combines kernel machines with average derivative

  5. Single-machine Multiple-recipe Predictive Maintenance , John Hasenbein

    E-Print Network [OSTI]

    Hasenbein, John

    Single-machine Multiple-recipe Predictive Maintenance Yiwei Cai , John Hasenbein , Erhan assume that the controller knows both the machine status and the current number of jobs in the system into account the machine's degradation status, such control decisions are known as predictive maintenance

  6. From Continuation Passing Style to Krivine's Abstract Machine

    E-Print Network [OSTI]

    Selinger, Peter

    From Continuation Passing Style to Krivine's Abstract Machine Peter Selinger Department different extensions of typed lambda calculus, how the rules for a version of Krivine's abstract machine can­in types and primitive functions. We also show how Krivine's abstract machine can be implemented

  7. 72 09-2011 elektor The Chaos Machine

    E-Print Network [OSTI]

    Ambaum, Maarten

    72 09-2011 elektor retronics The Chaos Machine Analogue computing rediscovered (1) For some of us reliability. Analogue computers are machines that are built to behave as the system we want to compute. They are powerful and engaging computing machines that are cheap and simple to build. This two-part Retronics

  8. Entity Authentication and Authenticated Key Exchange with Tree Parity Machines

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    synchronization of two in­ teracting identically structured Tree Parity Machines (TPMs) has been proposed underEntity Authentication and Authenticated Key Exchange with Tree Parity Machines Markus Volkmer key exchange in the framework of Tree Parity Machines (TPMs). The interaction of TPMs has been

  9. Synthesis for Logical Initializability of Synchronous Finite State Machines

    E-Print Network [OSTI]

    Synthesis for Logical Initializability of Synchronous Finite State Machines Montek Singh Steven M for the synthesis for logical initializability of synchronous state machines. The goal is to synthesize a gate to physically reset machines if they get out of synchronism. Furthermore, a form of initializability called

  10. EXECUTION MACHINE FOR SYNCHRONOUS LANGUAGES Charles ANDR Hdi BOUFAED

    E-Print Network [OSTI]

    André, Charles

    EXECUTION MACHINE FOR SYNCHRONOUS LANGUAGES Charles ANDR� Hédi BOUFAÏED Laboratoire I3S, Université on a the synchronous paradigm, and explains the role and the architecture of the execution machine. Keywords: synchronous programming, execution machine, control, implementation. NOMENCLATURE We use Courier as the font

  11. Processor Networks and Alternating Machines Jonathan F. Buss

    E-Print Network [OSTI]

    Buss, Jonathan

    ­ rived from alternating machines by the method pre­ sented here is that the synchronization requirementsProcessor Networks and Alternating Machines Jonathan F. Buss University of Waterloo \\Lambda networks are shown to be equivalent to alternating machines, in which the memory­access structure

  12. Synthesis for Logical Initializability of Synchronous Finite State Machines \\Lambda

    E-Print Network [OSTI]

    Synthesis for Logical Initializability of Synchronous Finite State Machines \\Lambda Montek Singh is introduced for the synthesis for logical initializability of synchronous state machines. The goal that initializes the state machine is called its synchronizing sequence or initialization sequence. A synchronizing

  13. Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT

    E-Print Network [OSTI]

    Tsymbal, Evgeny Y.

    Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES://ehs.unl.edu/) Introduction This SOP is intended to work in tandem with other EHS SOPs related to Lockout/Tagout (LO/TO): · Lockout/Tagout for Machines & Equipment: Program Overview · Lockout/Tagout for Machines & Equipment

  14. EE 444.3 (3L) Electric Machines II

    E-Print Network [OSTI]

    Saskatchewan, University of

    EE 444.3 (3L) Electric Machines II Department of Electrical and Computer Engineering Winter 2015 Description: This course provides an in-depth analysis of electric machines, the drive systems and the dynamic behavior of electric machines. Topics include inrush current, current and voltage transformer errors, dc

  15. Mechanical design of a desktop milling machine for fabrication in an introductory machining class by Johannes Schneider.

    E-Print Network [OSTI]

    Schneider, Johannes (Johannes A.)

    2010-01-01

    The purpose of this research is the mechanical design of a miniature desktop milling machine for use as an alternative class project in MIT's introductory machining course 2.670. This research is important, because a ...

  16. Production of optimised machine-code for high-level languages using machine-independent intermediate codes 

    E-Print Network [OSTI]

    Robertson, Peter Salkeld

    1981-01-01

    The aim of this work was to investigate the problems associated with using machine-independent intermediate codes in the translation from a high-level language into machine code, with emphasis on minimising code size ...

  17. Powering mm-Size Wireless Implants for Brain-Machine Interfaces

    E-Print Network [OSTI]

    Mark, Michael

    2011-01-01

    Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . .machine interfaces [Lebedev06] . . . . . . . . . . . . .rectifier interface . . . . . . . . . . . . . . . A half-

  18. THE CONTRIBUTION OF GREENLAND ICE SHEET MELTING TO

    E-Print Network [OSTI]

    THE CONTRIBUTION OF GREENLAND ICE SHEET MELTING TO GLOBAL SEA-LEVEL CHANGE Conor Mc, orbital cycles, glacial isostatic adjustment and tectonics. Each of these elements contribute different it to be directly observed. This project examined the contribution to sea-level change due to melting of ice from

  19. IceCube Project Monthly Report November 2007

    E-Print Network [OSTI]

    Saffman, Mark

    the current budgets or the budgets modified by the cost performance index. Change Log - IceCube Total Project IceCube array with a detector uptime of 97%, above the internal monthly goal of 95%. #12;Cost design, development, procured materials, and the construction of the infrastructure that supports

  20. Integrated navigation for AUV operations under ice shelves

    E-Print Network [OSTI]

    Griffiths, Gwyn

    2000 Heat Wipes Out Giant Antarctic Ice Shelf The Independent, 31 January 2000 Catastrophic Melting VI Pine Island Bay #12;The (virtual) mission ... #12;The first mission- March 2003: Pine Island Bay NASA 30 km Sea Ice Pine Island Glacier Open Water 9 February 2003 #12;The Pine Island Bay Glacier

  1. ENERGY BASED ICE COLLISION FORCES Claude Daley1

    E-Print Network [OSTI]

    Daley, Claude

    1 ENERGY BASED ICE COLLISION FORCES Claude Daley1 1 Memorial University of Newfoundland, St. John's, Newfoundland, Canada A1C 3X5 ABSTRACT Ice collision forces can be determined by energy considerations. A variety of interaction geometry cases are considered. The indentation energy functions for eight different

  2. ENERGY BASED ICE COLLISION FORCES Claude Daley1

    E-Print Network [OSTI]

    Daley, Claude

    ENERGY BASED ICE COLLISION FORCES Claude Daley1 1 Memorial University of Newfoundland, St. John's, Newfoundland, Canada A1C 3X5 ABSTRACT Ice collision forces can be determined by energy considerations. A variety of interaction geometry cases are considered. The indentation energy functions for eight different

  3. ORIGINAL ARTICLE Diatom assemblages promote ice formation in large

    E-Print Network [OSTI]

    Lee Jr., Richard E.

    (Oyserman et al., 2012; Twiss et al., 2012). Conducted during times of expansive ice cover, these surveys (Saxton et al., 2012; Twiss et al., 2012). The physical processes involved in the develop- ment of diatom demonstrated the presence of viable diatoms in meltwater from lake ice (Twiss et al., 2012), consistent

  4. Passive ice freezing-releasing heat pipe. [Patent application

    DOE Patents [OSTI]

    Gorski, A.J.; Schertz, W.W.

    1980-09-29

    A heat pipe device has been developed which permits completely passive ice formation and periodic release of ice without requiring the ambient temperature to rise above the melting point of water. This passive design enables the maximum amount of cooling capacity to be stored in the tank.

  5. Ice Storm Damage Greater Along the Terrestrial-Aquatic Interface

    E-Print Network [OSTI]

    Kraft, Clifford E.

    Ice Storm Damage Greater Along the Terrestrial-Aquatic Interface in Forested Landscapes Andrew A- tems. In 1998, a severe ice storm damaged over ten million hectares of forest across northern New York investigated the spatial arrangement of forest damage at the terrestrial-aquatic interface, an ecological edge

  6. Fluid Migration During Ice/Rock Planetesimal Differentiation 

    E-Print Network [OSTI]

    Raney, Robert 1987-

    2012-12-12

    fast melt water can segregate from the core of an ice-rich planetesimal. To answer this question we treat the core as two phase flow problem: a compacting viscous “solid” (ice/rock mixture) and a segregating liquid (melt water). The model developed...

  7. Third international workshop on ice storage for cooling applications

    SciTech Connect (OSTI)

    Gorski, A.J.

    1986-04-01

    The third international workshop on ice storage for cooling applications which was informal and interactive in nature, was open to persons interested in all ice-growing technologies and in ice storage, both seasonal and diurnal. Presentations were made on some 20 topics, ranging from freezers in Alaska to ice cooling of commercial jet aircraft. Workshop tours included visits to ice-storage systems at Commonwealth Edison's facilities in Bolingbrook and Des Plaines Valley, the A.C. Neilsen builing in Northbrook, and the new State of Illinois Center in Chicago. The first workshop in the present series considered the future of ice storage and predicted applications in the agricultural sector, desalinization, and commercial ice production. Progress has been rapid in the intervening two years, and an important topic at the third workshop was the possible use of ''warm ices'' (clathrate hydrates) for energy storage. This report consists primarily of abstracts of presentations made at the workshop. Persons wishing to obtain further information about particular papers should contact the speakers directly; speakers' addresses and telephone numbers are listed in this report.

  8. Has the ice man arrived? Tact on the Internet

    E-Print Network [OSTI]

    Hearst, Marti

    Has the ice man arrived? Tact on the Internet Jonathan Grudin, UC Irvine and Microsoft Research resides in this extremely efficient spread of information. It is efficient, but it is not dis- crete. Eugene O'Neill's play The Ice Man Cometh outlines a series of calamities that occur when his characters

  9. CO diffusion into amorphous H2O ices

    E-Print Network [OSTI]

    Lauck, Trish; Shulenberger, Katherine; Rajappan, Mahesh; Oberg, Karin I; Cuppen, Herma M

    2015-01-01

    The mobility of atoms, molecules and radicals in icy grain mantles regulate ice restructuring, desorption, and chemistry in astrophysical environments. Interstellar ices are dominated by H2O, and diffusion on external and internal (pore) surfaces of H2O-rich ices is therefore a key process to constrain. This study aims to quantify the diffusion kinetics and barrier of the abundant ice constituent CO into H2O dominated ices at low temperatures (15-23 K), by measuring the mixing rate of initially layered H2O(:CO2)/CO ices. The mixed fraction of CO as a function of time is determined by monitoring the shape of the infrared CO stretching band. Mixing is observed at all investigated temperatures on minute time scales, and can be ascribed to CO diffusion in H2O ice pores. The diffusion coefficient and final mixed fraction depend on ice temperature, porosity, thickness and composition. The experiments are analyzed by applying Fick's diffusion equation under the assumption that mixing is due to CO diffusion into an i...

  10. UV Irradiation of Polycyclic Aromatic Hydrocarbons in Ices

    E-Print Network [OSTI]

    UV Irradiation of Polycyclic Aromatic Hydrocarbons in Ices: Production of Alcohols, Quinones. Clemett,3 Richard N. Zare3 Polycyclic aromatic hydrocarbons (PAHs) in water ice were exposed to ultra, and ethers, and reduced, producing partially hydrogenated aromatic hydrocarbons, molecules that account

  11. Methods and apparatus for rotor blade ice detection

    DOE Patents [OSTI]

    LeMieux, David Lawrence

    2006-08-08

    A method for detecting ice on a wind turbine having a rotor and one or more rotor blades each having blade roots includes monitoring meteorological conditions relating to icing conditions and monitoring one or more physical characteristics of the wind turbine in operation that vary in accordance with at least one of the mass of the one or more rotor blades or a mass imbalance between the rotor blades. The method also includes using the one or more monitored physical characteristics to determine whether a blade mass anomaly exists, determining whether the monitored meteorological conditions are consistent with blade icing; and signaling an icing-related blade mass anomaly when a blade mass anomaly is determined to exist and the monitored meteorological conditions are determined to be consistent with icing.

  12. THE PHASES OF WATER ICE IN THE SOLAR NEBULA

    SciTech Connect (OSTI)

    Ciesla, Fred J.

    2014-03-20

    Understanding the phases of water ice that were present in the solar nebula has implications for understanding cometary and planetary compositions as well as the internal evolution of these bodies. Here we show that amorphous ice formed more readily than previously recognized, with formation at temperatures <70 K being possible under protoplanetary disk conditions. We further argue that photodesorption and freeze-out of water molecules near the surface layers of the solar nebula would have provided the conditions needed for amorphous ice to form. This processing would be a natural consequence of ice dynamics and would allow for the trapping of noble gases and other volatiles in water ice in the outer solar nebula.

  13. Field demonstration of the ICE 250{trademark} Cleaning System

    SciTech Connect (OSTI)

    Johnston, J.L.; Jackson, L.M.

    1999-10-05

    The ICE 250{trademark} Cleaning System was engineered to convert water into small ice particles for use in cleaning and decontamination applications. Ice crystals are produced in a special icemaker and pressured through a hose-nozzle onto the surface to be cleaned. The Rocky Mountain Oilfield Testing Center and Ice Cleaning Systems, Inc., conducted a test of this system at Naval Petroleum Reserve No. 3 to evaluate the system's cleaning capabilities in an oil field environment. Equipment cleaned included an oil storage tank, a rod pumping unit, a road grader, and a wellhead. Contaminants were unrefined sour crude oil, hydraulic fluid, paraffin, and dirt, occurring separately and as mixtures. In all four demonstration cleaning tasks, the ICE 250 System effectively removed surface contaminant mixtures in a timely manner and left no oily residue. A minimal amount of waste moisture was generated, thereby reducing cleanup and disposal costs.

  14. MILLING OPERATIONS Milling is the process of machining flat, curved, or Milling machines are basically classified as vertical or

    E-Print Network [OSTI]

    Gellman, Andrew J.

    of a motor driven spindle, which milling machines have self-contained electric drive motors, mountsTC 9-524 Chapter 8 MILLING OPERATIONS Milling is the process of machining flat, curved, or Milling machines are basically classified as vertical or irregular surfaces by feeding the workpiece against

  15. Control System Design for Automatic Cavity Tuning Machines

    SciTech Connect (OSTI)

    Carcagno, R.; Khabiboulline, T.; Kotelnikov, S.; Makulski, A.; Nehring, R.; Nogiec, J.; Ross, M.; Schappert, W.; /Fermilab; Goessel, A.; Iversen, J.; Klinke, D.; /DESY

    2009-05-01

    A series of four automatic tuning machines for 9-cell TESLA-type cavities are being developed and fabricated in a collaborative effort among DESY, FNAL, and KEK. These machines are intended to support high-throughput cavity fabrication for construction of large SRF-based accelerator projects. Two of these machines will be delivered to cavity vendors for the tuning of XFEL cavities. The control system for these machines must support a high level of automation adequate for industrial use by non-experts operators. This paper describes the control system hardware and software design for these machines.

  16. The future of water, ice, snow underThe future of water, ice, snow under global warmingglobal warming

    E-Print Network [OSTI]

    Hurricane Katrina, the Kerry--Gingrich debate over globalGingrich debate over global warming, the local and regional warming.effects of global warming. Climate extends beyond temperature and rainfall, toClimate extendsThe future of water, ice, snow underThe future of water, ice, snow under global warmingglobal

  17. Observations of ice thickness and frazil ice in the St. Lawrence Island polynya from satellite imagery, upward looking sonar, and

    E-Print Network [OSTI]

    Washington at Seattle, University of

    with meteorological observations and a heat flux model. South of the island, we compare the ULS and thermalObservations of ice thickness and frazil ice in the St. Lawrence Island polynya from satellite, this paper examines the behavior of the Bering Sea St. Lawrence Island polynya using a combination

  18. Results from IceCube Mumbai, 11/12/12 Tom Gaisser for the IceCube Collab. 1

    E-Print Network [OSTI]

    Gaisser, Thomas K.

    Results from IceCube Mumbai, 11/12/12 Tom Gaisser for the IceCube Collab. 1 #12;2 39 Ins>tu>ons ~220 collaborators Mumbai, 11/12/12 Tom Gaisser-10 20 79 2010-11 7 86 Mumbai, 11/12/12 Tom Gaisser

  19. CO2 diffusion in polar ice: observations from naturally formed CO2 spikes in the Siple Dome (Antarctica) ice core

    E-Print Network [OSTI]

    Raggio Parkway, Reno, Nevada 89512-1095, USA ABSTRACT. One common assumption in interpreting ice-core CO2 records is that diffusion in the ice does not affect the concentration profile. However, this assumption/Ar and Kr/Ar), electrical conductivity and Ca2+ ion concentrations to show that substantial CO2 diffusion

  20. Sea ice in the paleoclimate system: the challenge of reconstructing sea ice from proxies e an introduction

    E-Print Network [OSTI]

    University, Denmark e Department of Earth Sciences, University of Cambridge, UK f British Antarctic Survey. In the climate system, sea ice cover generally acts as an amplifier: it in- fluences the energy budget). Under perennial sea ice there is generally little primary production apart from under special conditions

  1. Quantification of uncertainty in machining operations for on-machine acceptance.

    SciTech Connect (OSTI)

    Claudet, Andre A.; Tran, Hy D.; Su, Jiann-Chemg

    2008-09-01

    Manufactured parts are designed with acceptance tolerances, i.e. deviations from ideal design conditions, due to unavoidable errors in the manufacturing process. It is necessary to measure and evaluate the manufactured part, compared to the nominal design, to determine whether the part meets design specifications. The scope of this research project is dimensional acceptance of machined parts; specifically, parts machined using numerically controlled (NC, or also CNC for Computer Numerically Controlled) machines. In the design/build/accept cycle, the designer will specify both a nominal value, and an acceptable tolerance. As part of the typical design/build/accept business practice, it is required to verify that the part did meet acceptable values prior to acceptance. Manufacturing cost must include not only raw materials and added labor, but also the cost of ensuring conformance to specifications. Ensuring conformance is a substantial portion of the cost of manufacturing. In this project, the costs of measurements were approximately 50% of the cost of the machined part. In production, cost of measurement would be smaller, but still a substantial proportion of manufacturing cost. The results of this research project will point to a science-based approach to reducing the cost of ensuring conformance to specifications. The approach that we take is to determine, a priori, how well a CNC machine can manufacture a particular geometry from stock. Based on the knowledge of the manufacturing process, we are then able to decide features which need further measurements from features which can be accepted 'as is' from the CNC. By calibration of the machine tool, and establishing a machining accuracy ratio, we can validate the ability of CNC to fabricate to a particular level of tolerance. This will eliminate the costs of checking for conformance for relatively large tolerances.

  2. Hybrid-secondary uncluttered induction machine

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    2001-01-01

    An uncluttered secondary induction machine (100) includes an uncluttered rotating transformer (66) which is mounted on the same shaft as the rotor (73) of the induction machine. Current in the rotor (73) is electrically connected to current in the rotor winding (67) of the transformer, which is not electrically connected to, but is magnetically coupled to, a stator secondary winding (40). The stator secondary winding (40) is alternately connected to an effective resistance (41), an AC source inverter (42) or a magnetic switch (43) to provide a cost effective slip-energy-controlled, adjustable speed, induction motor that operates over a wide speed range from below synchronous speed to above synchronous speed based on the AC line frequency fed to the stator.

  3. Quantum Inspired Training for Boltzmann Machines

    E-Print Network [OSTI]

    Nathan Wiebe; Ashish Kapoor; Christopher Granade; Krysta M Svore

    2015-07-09

    We present an efficient classical algorithm for training deep Boltzmann machines (DBMs) that uses rejection sampling in concert with variational approximations to estimate the gradients of the training objective function. Our algorithm is inspired by a recent quantum algorithm for training DBMs. We obtain rigorous bounds on the errors in the approximate gradients; in turn, we find that choosing the instrumental distribution to minimize the alpha=2 divergence with the Gibbs state minimizes the asymptotic algorithmic complexity. Our rejection sampling approach can yield more accurate gradients than low-order contrastive divergence training and the costs incurred in finding increasingly accurate gradients can be easily parallelized. Finally our algorithm can train full Boltzmann machines and scales more favorably with the number of layers in a DBM than greedy contrastive divergence training.

  4. Kowalevski's analysis of the swinging Atwood's machine

    E-Print Network [OSTI]

    Olivier Babelon; Michel Talon; Michel Capdequi Peyrančre

    2009-09-30

    We study the Kowalevski expansions near singularities of the swinging Atwood's machine. We show that there is a infinite number of mass ratios $M/m$ where such expansions exist with the maximal number of arbitrary constants. These expansions are of the so--called weak Painlev\\'e type. However, in view of these expansions, it is not possible to distinguish between integrable and non integrable cases.

  5. Requirements for CEC POP machine protection system

    SciTech Connect (OSTI)

    Pinayev, I.

    2015-02-18

    The requirements of CEC POP machine protection system are meant to prevent damage to a vacuum chamber by a missteered electron beam. In this example, beam energy = 22 MeV, Maximal bunch charge = 5 nC, Maximal repetition rate = 78 kHz, Normalized emittance = 5 mm mrad, Minimal ?-function = 1 m. From this information the requirements of the protection system can be calculated by factoring the information into equations to find beam densities and temperature excursions.

  6. Machine augmented composite materials for damping purposes 

    E-Print Network [OSTI]

    McCutcheon, David Matthew

    2005-02-17

    modulus [2]. The magnitude of the complex stiffness is determined by computing the square root of the sum of the squares of the storage modulus and the loss modulus. 1.2. Objective The development MAC materials that exhibit good damping properties...-1 MACHINE AUGMENTED COMPOSITE MATERIALS FOR DAMPING PURPOSES A Thesis by DAVID MATTHEW MCCUTCHEON Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

  7. Dovetail spoke internal permanent magnet machine

    DOE Patents [OSTI]

    Alexander, James Pellegrino (Ballston Lake, NY); EL-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Shah, Manoj Ramprasad (Latham, NY); VanDam, Jeremy Daniel (West Coxsackie, NY)

    2011-08-23

    An internal permanent magnet (IPM) machine is provided. The IPM machine includes a stator assembly and a stator core. The stator core also includes multiple stator teeth. The stator assembly is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface defining a cavity. The IPM machine also includes a rotor assembly and a rotor core. The rotor core is disposed inside the cavity and configured to rotate about the longitudinal axis. The rotor assembly further includes a shaft. The shaft further includes multiple protrusions alternately arranged relative to multiple bottom structures provided on the shaft. The rotor assembly also includes multiple stacks of laminations disposed on the protrusions and dovetailed circumferentially around the shaft. The rotor assembly further includes multiple pair of permanent magnets for generating a magnetic field, which magnetic field interacts with the stator magnetic field to produce a torque. The multiple pair of permanent magnets are disposed between the stacks. The rotor assembly also includes multiple middle wedges mounted between each pair of the multiple permanent magnets.

  8. Positional reference system for ultraprecision machining

    DOE Patents [OSTI]

    Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

    1980-09-12

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

  9. Process for laser machining and surface treatment

    DOE Patents [OSTI]

    Neil, George R.; Shinn, Michelle D.

    2004-10-26

    An improved method and apparatus increasing the accuracy and reducing the time required to machine materials, surface treat materials, and allow better control of defects such as particulates in pulsed laser deposition. The speed and quality of machining is improved by combining an ultrashort pulsed laser at high average power with a continuous wave laser. The ultrashort pulsed laser provides an initial ultrashort pulse, on the order of several hundred femtoseconds, to stimulate an electron avalanche in the target material. Coincident with the ultrashort pulse or shortly after it, a pulse from a continuous wave laser is applied to the target. The micromachining method and apparatus creates an initial ultrashort laser pulse to ignite the ablation followed by a longer laser pulse to sustain and enlarge on the ablation effect launched in the initial pulse. The pulse pairs are repeated at a high pulse repetition frequency and as often as desired to produce the desired micromachining effect. The micromachining method enables a lower threshold for ablation, provides more deterministic damage, minimizes the heat affected zone, minimizes cracking or melting, and reduces the time involved to create the desired machining effect.

  10. Air conditioning system with supplemental ice storing and cooling capacity

    DOE Patents [OSTI]

    Weng, Kuo-Lianq (Taichung, TW); Weng, Kuo-Liang (Taichung, TW)

    1998-01-01

    The present air conditioning system with ice storing and cooling capacity can generate and store ice in its pipe assembly or in an ice storage tank particularly equipped for the system, depending on the type of the air conditioning system. The system is characterized in particular in that ice can be produced and stored in the air conditioning system whereby the time of supplying cooled air can be effectively extended with the merit that the operation cycle of the on and off of the compressor can be prolonged, extending the operation lifespan of the compressor in one aspect. In another aspect, ice production and storage in great amount can be performed in an off-peak period of the electrical power consumption and the stored ice can be utilized in the peak period of the power consumption so as to provide supplemental cooling capacity for the compressor of the air conditioning system whereby the shift of peak and off-peak power consumption can be effected with ease. The present air conditioning system can lower the installation expense for an ice-storing air conditioning system and can also be applied to an old conventional air conditioning system.

  11. Photodesorption of ices I: CO, N2 and CO2

    E-Print Network [OSTI]

    Karin I. Oberg; Ewine F. van Dishoeck; Harold Linnartz

    2009-01-23

    A longstanding problem in astrochemistry is how molecules can be maintained in the gas phase in dense inter- and circumstellar regions. Photodesorption is a non-thermal desorption mechanism, which may explain the small amounts of observed cold gas in cloud cores and disk mid-planes. This paper aims to determine the UV photodesorption yields and to constrain the photodesorption mechanisms of three astrochemically relevant ices: CO, N2 and CO2. In addition, the possibility of co-desorption in mixed and layered CO:N2 ices is explored. The ice photodesorption is studied experimentally under ultra high vacuum conditions and at 15-60 K using a hydrogen discharge lamp (7-10.5 eV). The ice desorption during irradiation is monitored by reflection absorption infrared spectroscopy of the ice and simultaneous mass spectrometry of the desorbed molecules. Both the UV photodesorption yields per incident photon and the photodesorption mechanisms are molecule specific. CO photodesorbs without dissociation from the surface layer of the ice. N2, which lacks an electronic transition in this wavelength range, has a photodesorption yield that is more than an order of magnitude lower. This yield increases significantly due to co-desorption when N2 is mixed in with or layered on top of CO ice. CO2 photodesorbs through dissociation and subsequent recombination from the top 10 layers of the ice. At low temperatures (15-18 K) the derived photodesorption yields are 2.7x10^-3 and CO2 photodesorption yield is 1.2x10^-3x(1-e^(-X/2.9)) + 1.1x10^-3x(1-e^(-X/4.6)) molecules photon-1, where X is the ice thickness in monolayers and the two parts of the expression represent a CO2 and CO photodesorption pathway.

  12. Gas ageice age differences and the chronology of the Vostok ice core, M. L. Bender,1

    E-Print Network [OSTI]

    Chappellaz, Jérôme

    Gas age­ice age differences and the chronology of the Vostok ice core, 0­100 ka M. L. Bender,1 G. [1] Gas is trapped in polar ice at depths of $50­120 m and is therefore significantly younger than cores (Vostok, Dome Fuji, and Dome C). We recorrelate the gas records of Vostok and Greenland Ice Sheet

  13. Fast numerical method for growth and retreat of subsurface ice on Mars Norbert Schorghofer

    E-Print Network [OSTI]

    Schörghofer, Norbert

    ice, retreat of pore ice, retreat of an ice sheet, and retreat of pore ice due to geothermal heating) Dtexpl: vertical spatial resolution and D the diffusion coef- ficient. The vertical grid spacing needs to be finer than the diurnal skin depth of the temperature cycle. The diurnal

  14. Modelling the reorientation of sea-ice faults as the wind changes direction

    E-Print Network [OSTI]

    Feltham, Daniel

    Modelling the reorientation of sea-ice faults as the wind changes direction Alexander V. WILCHINSKY-1290, USA ABSTRACT. A discrete-element model of sea ice is used to study how a 908 change in wind direction alters the pattern of faults generated through mechanical failure of the ice. The sea-ice domain is 400

  15. Development, sensitivity analysis, and uncertainty quantification of high-fidelity arctic sea ice models.

    SciTech Connect (OSTI)

    Peterson, Kara J.; Bochev, Pavel Blagoveston; Paskaleva, Biliana S.

    2010-09-01

    Arctic sea ice is an important component of the global climate system and due to feedback effects the Arctic ice cover is changing rapidly. Predictive mathematical models are of paramount importance for accurate estimates of the future ice trajectory. However, the sea ice components of Global Climate Models (GCMs) vary significantly in their prediction of the future state of Arctic sea ice and have generally underestimated the rate of decline in minimum sea ice extent seen over the past thirty years. One of the contributing factors to this variability is the sensitivity of the sea ice to model physical parameters. A new sea ice model that has the potential to improve sea ice predictions incorporates an anisotropic elastic-decohesive rheology and dynamics solved using the material-point method (MPM), which combines Lagrangian particles for advection with a background grid for gradient computations. We evaluate the variability of the Los Alamos National Laboratory CICE code and the MPM sea ice code for a single year simulation of the Arctic basin using consistent ocean and atmospheric forcing. Sensitivities of ice volume, ice area, ice extent, root mean square (RMS) ice speed, central Arctic ice thickness, and central Arctic ice speed with respect to ten different dynamic and thermodynamic parameters are evaluated both individually and in combination using the Design Analysis Kit for Optimization and Terascale Applications (DAKOTA). We find similar responses for the two codes and some interesting seasonal variability in the strength of the parameters on the solution.

  16. A Model of Viscoelastic Ice-Shelf Flexure

    E-Print Network [OSTI]

    MacAyeal, Douglas R.; Sergienko, Olga V.; Banwell, Alison F.

    2015-07-15

    -shelf and ice-stream motion and stress fields. Examples of these phenomena27 include tide-driven grounding-line flexure and migration [e.g., Sayag and Worster, 2013, Tsai and28 Gudmundsson, 2015], tidally pulsed grounding line ice velocity variations [e... -shelf flexure that is applicable to circumstances where the114 ratio of vertical to horizontal length scales, H and L, respectively, is small (H/L ? 1), and where115 the vertical displacement (assumed constant through the depth of the ice shelf) due to flexure...

  17. Microphysical Consequences of the Spatial Distribution of Ice Nucleation in Mixed-Phase Stratiform Clouds

    SciTech Connect (OSTI)

    Yang, Fan; Ovchinnikov, Mikhail; Shaw, Raymond A.

    2014-07-28

    Mixed-phase stratiform clouds can persist even with steady ice precipitation fluxes, and the origin and microphysical properties of the ice crystals are of interest. Vapor deposition growth and sedimentation of ice particles along with a uniform volume source of ice nucleation, leads to a power law relation between ice water content wi and ice number concentration ni with exponent 2.5. The result is independent of assumptions about the vertical velocity structure of the cloud and is therefore more general than the related expression of Yang et al. [2013]. The sensitivity of the wi-ni relationship to the spatial distribution of ice nucleation is confirmed by Lagrangian tracking and ice growth with cloud-volume, cloud-top, and cloud-base sources of ice particles through a time-dependent cloud field. Based on observed wi and ni from ISDAC, a lower bound of 0.006 m^3/s is obtained for the ice crystal formation rate.

  18. Minimalist Model of Ice Microphysics in Mixed-phase Stratiform Clouds

    SciTech Connect (OSTI)

    Yang, F.; Ovchinnikov, Mikhail; Shaw, Raymond A.

    2013-07-28

    The question of whether persistent ice crystal precipitation from super cooled layer clouds can be explained by time-dependent, stochastic ice nucleation is explored using an approximate, analytical model, and a large-eddy simulation (LES) cloud model. The updraft velocity in the cloud defines an accumulation zone, where small ice particles cannot fall out until they are large enough, which will increase the residence time of ice particles in the cloud. Ice particles reach a quasi-steady state between growth by vapor deposition and fall speed at cloud base. The analytical model predicts that ice water content (wi) has a 2.5 power law relationship with ice number concentration ni. wi and ni from a LES cloud model with stochastic ice nucleation also confirm the 2.5 power law relationship. The prefactor of the power law is proportional to the ice nucleation rate, and therefore provides a quantitative link to observations of ice microphysical properties.

  19. THE STRUCTURE OF SURFACE H{sub 2}O LAYERS OF ICE-COVERED PLANETS WITH HIGH-PRESSURE ICE

    SciTech Connect (OSTI)

    Ueta, S.; Sasaki, T. E-mail: takanori@geo.titech.ac.jp

    2013-10-01

    Many extrasolar (bound) terrestrial planets and free-floating (unbound) planets have been discovered. While the existence of bound and unbound terrestrial planets with liquid water is an important question, of particular importance is the question of these planets' habitability. Even for a globally ice-covered planet, geothermal heat from the planetary interior may melt the interior ice, creating an internal ocean covered by an ice shell. In this paper, we discuss the conditions that terrestrial planets must satisfy for such an internal ocean to exist on the timescale of planetary evolution. The question is addressed in terms of planetary mass, distance from a central star, water abundance, and abundance of radiogenic heat sources. In addition, we investigate the structure of the surface H{sub 2}O layers of ice-covered planets by considering the effects of ice under high pressure (high-pressure ice). As a fiducial case, a 1 M{sub ?} planet at 1 AU from its central star and with 0.6-25 times the H{sub 2}O mass of the Earth could have an internal ocean. We find that high-pressure ice layers may appear between the internal ocean and the rock portion on a planet with an H{sub 2}O mass over 25 times that of the Earth. The planetary mass and abundance of surface water strongly restrict the conditions under which an extrasolar terrestrial planet may have an internal ocean with no high-pressure ice under the ocean. Such high-pressure ice layers underlying the internal ocean are likely to affect the habitability of the planet.

  20. Ice Concentration Retrieval in Stratiform Mixed-phase Clouds Using Cloud Radar Reflectivity Measurements and 1D Ice Growth Model Simulations

    SciTech Connect (OSTI)

    Zhang, Damao; Wang, Zhien; Heymsfield, Andrew J.; Fan, Jiwen; Luo, Tao

    2014-10-01

    Measurement of ice number concentration in clouds is important but still challenging. Stratiform mixed-phase clouds (SMCs) provide a simple scenario for retrieving ice number concentration from remote sensing measurements. The simple ice generation and growth pattern in SMCs offers opportunities to use cloud radar reflectivity (Ze) measurements and other cloud properties to infer ice number concentration quantitatively. To understand the strong temperature dependency of ice habit and growth rate quantitatively, we develop a 1-D ice growth model to calculate the ice diffusional growth along its falling trajectory in SMCs. The radar reflectivity and fall velocity profiles of ice crystals calculated from the 1-D ice growth model are evaluated with the Atmospheric Radiation Measurements (ARM) Climate Research Facility (ACRF) ground-based high vertical resolution radar measurements. Combining Ze measurements and 1-D ice growth model simulations, we develop a method to retrieve the ice number concentrations in SMCs at given cloud top temperature (CTT) and liquid water path (LWP). The retrieved ice concentrations in SMCs are evaluated with in situ measurements and with a three-dimensional cloud-resolving model simulation with a bin microphysical scheme. These comparisons show that the retrieved ice number concentrations are within an uncertainty of a factor of 2, statistically.

  1. 1 | De-icing salt damage to trees | November 2011 Pathology Advisory Note

    E-Print Network [OSTI]

    1 | De-icing salt damage to trees | November 2011 Pathology Advisory Note (No. 11) De-icing salt damage to trees De-icing Salt Damage to Trees Joan F Webber, David R Rose, Martin C Dobson #12;2 | De-icing salt damage to trees | November 2011 S a l t D a m a g e De-icing Salt Damage Introduction Rock salt

  2. Means and method of balancing multi-cylinder reciprocating machines

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY); Walsh, Michael M. (Schenectady, NY)

    1985-01-01

    A virtual balancing axis arrangement is described for multi-cylinder reciprocating piston machines for effectively balancing out imbalanced forces and minimizing residual imbalance moments acting on the crankshaft of such machines without requiring the use of additional parallel-arrayed balancing shafts or complex and expensive gear arrangements. The novel virtual balancing axis arrangement is capable of being designed into multi-cylinder reciprocating piston and crankshaft machines for substantially reducing vibrations induced during operation of such machines with only minimal number of additional component parts. Some of the required component parts may be available from parts already required for operation of auxiliary equipment, such as oil and water pumps used in certain types of reciprocating piston and crankshaft machine so that by appropriate location and dimensioning in accordance with the teachings of the invention, the virtual balancing axis arrangement can be built into the machine at little or no additional cost.

  3. Method for measuring the contour of a machined part

    DOE Patents [OSTI]

    Bieg, L.F.

    1995-05-30

    A method is disclosed for measuring the contour of a machined part with a contour gage apparatus, having a probe assembly including a probe tip for providing a measure of linear displacement of the tip on the surface of the part. The contour gage apparatus may be moved into and out of position for measuring the part while the part is still carried on the machining apparatus. Relative positions between the part and the probe tip may be changed, and a scanning operation is performed on the machined part by sweeping the part with the probe tip, whereby data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip are recorded. The method further allows real-time adjustment of the apparatus machining the part, including real-time adjustment of the machining apparatus in response to wear of the tool that occurs during machining. 5 figs.

  4. Entanglement-Based Machine Learning on a Quantum Computer

    E-Print Network [OSTI]

    X. -D. Cai; D. Wu; Z. -E. Su; M. -C. Chen; X. -L. Wang; L. Li; N. -L. Liu; C. -Y. Lu; J. -W. Pan

    2015-02-08

    Machine learning, a branch of artificial intelligence, learns from previous experience to optimize performance, which is ubiquitous in various fields such as computer sciences, financial analysis, robotics, and bioinformatics. A challenge is that machine learning with the rapidly growing "big data" could become intractable for classical computers. Recently, quantum machine learning algorithms [Lloyd, Mohseni, and Rebentrost, arXiv.1307.0411] were proposed which could offer an exponential speedup over classical algorithms. Here, we report the first experimental entanglement-based classification of 2-, 4-, and 8-dimensional vectors to different clusters using a small-scale photonic quantum computer, which are then used to implement supervised and unsupervised machine learning. The results demonstrate the working principle of using quantum computers to manipulate and classify high-dimensional vectors, the core mathematical routine in machine learning. The method can in principle be scaled to larger number of qubits, and may provide a new route to accelerate machine learning.

  5. Rain Machine (Solar Still) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURINGEnergy BillsNo. 195 - Oct. 7,DOE HDBK-1113-2008 April 2008 DOE98Rain Machine (Solar

  6. Akrong Machine Services | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OFAMERICA'SHeavyAgencyTendoMassachusetts:RenewableInc Jump to:Akrong Machine

  7. Z Machine | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal Gas &SCE-SessionsSouthReport forRetirementAdministrationWayne| NationalMachine |

  8. briquette press machine | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (UtilityMichigan) JumpZhuyuanWindeyZibo BaoyunZoukaskplantpress machine

  9. z machine | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26thI D- 6 0 4 2 rz machine | National Nuclear Security

  10. Autosub missions beneath Polar Ice: Preparation and Experience

    E-Print Network [OSTI]

    Griffiths, Gwyn

    events implemented (up from 1); ordered sequences of events to trigger next mission element added. J and shelf ice. 4 - 12 kHz chirp sub-bottom profiler to obtain the stratigraphy within sediments Water

  11. Hydrological and biogeochemical cycling along the Greenland ice sheet margin

    E-Print Network [OSTI]

    Bhatia, Maya Pilar, 1979-

    2012-01-01

    Global warming has led to a significant increase in Greenland ice sheet (GrIS) melt and runoff since 1990, resulting in escalated export of fresh water and associated sediment to the surrounding North Atlantic and Arctic ...

  12. Intelligent Matchmaking for Polar Ice Sheet Data Collection and Delivery

    E-Print Network [OSTI]

    Kansas, University of

    for the dynamic configuration of sensors and the motion of the rovers that carry them. The PRISM intelligent intelligent sensor and roveIntelligent Matchmaking for Polar Ice Sheet Data Collection and Delivery Costas Tsatsoulis, Sudha

  13. Neutrino Physics with the IceCube Detector

    E-Print Network [OSTI]

    Kiryluk, Joanna; IceCube Collaboration

    2008-01-01

    Science, O?ce of Nu- clear Physics, of the U.S. Departmentjkiryluk?lake?louise?lbl NEUTRINO PHYSICS WITH THE ICECUBESNRs). Other IceCube physics topics include searches for

  14. Periodic fluctuations in deep water formation due to sea ice

    E-Print Network [OSTI]

    Saha, Raj

    2015-01-01

    During the last ice age several quasi-periodic abrupt warming events took place. Known as Dansgaard-Oeschger (DO) events their effects were felt globally, although the North Atlantic experienced the largest temperature anomalies. Paleoclimate data shows that the fluctuations often occurred right after massive glacial meltwater releases in the North Atlantic and in bursts of three or four with progressively decreasing strengths. In this study a simple dynamical model of an overturning circulation and sea ice is developed with the goal of understanding the fundamental mechanisms that could have caused the DO events. Interaction between sea ice and the overturning circulation in the model produces self-sustained oscillations. Analysis and numerical experiments reveal that the insulating effect of sea ice causes the ocean to periodically vent out accumulated heat in the deep ocean into the atmosphere. Subjecting the model to idealized freshwater forcing mimicking Heinrich events causes modulation of the natural p...

  15. Immersion freezing of clay minerals and bacterial ice nuclei

    E-Print Network [OSTI]

    Hiranuma, Naruki

    2013-01-01

    The immersion mode ice nucleation efficiency of clay minerals and biological aerosols has been investigated using the AIDA (Aerosol Interaction and Dynamics in the Atmosphere) cloud chamber. Both monodisperse and polydisperse ...

  16. Interface limited growth of heterogeneously nucleated ice in supercooled water

    E-Print Network [OSTI]

    Razvan A. Nistor; Thomas E. Markland; B. J. Berne

    2013-12-30

    Heterogeneous ice growth exhibits a maximum in freezing rate arising from the competition between kinetics and the thermodynamic driving force between the solid and liquid states. Here, we use molecular dynamics simulations to elucidate the atomistic details of this competition, focusing on water properties in the interfacial region along the secondary prismatic direction. The crystal growth velocity is maximized when the efficiency of converting interfacial water molecules to ice, collectively known as the attachment kinetics, is greatest. We find water molecules that contact the intermediate ice layer in concave regions along the atomistically roughened surface are more likely to freeze directly. The increased roughening of the solid surface at large undercoolings consequently plays an important limiting role on the rate of ice growth, as water molecules are unable to integrate into increasingly deeper surface pockets. These results provide insights into the molecular mechanisms for self-assembly of solid phases that are important in many biological and atmospheric processes.

  17. Psychology General Of1ice P217 Biological Sciences Building

    E-Print Network [OSTI]

    Machel, Hans

    Psychology General Of1ice P217 Biological Sciences Building Edmonton, Alberta. Robert Cook ----------------------------------------------- Professor of Psychology Dean in 1986, when he joined the Department of Psychology as an assistant

  18. Thermal desorption of CH4 retained in CO2 ice

    E-Print Network [OSTI]

    Luna, R; Domingo, M; Satorre, M A

    2008-01-01

    CO2 ices are known to exist in different astrophysical environments. In spite of this, its physical properties (structure, density, refractive index) have not been as widely studied as those of water ice. It would be of great value to study the adsorption properties of this ice in conditions related to astrophysical environments. In this paper, we explore the possibility that CO2 traps relevant molecules in astrophysical environments at temperatures higher than expected from their characteristic sublimation point. To fulfil this aim we have carried out desorption experiments under High Vacuum conditions based on a Quartz Crystal Microbalance and additionally monitored with a Quadrupole Mass Spectrometer. From our results, the presence of CH4 in the solid phase above the sublimation temperature in some astrophysical scenarios could be explained by the presence of several retaining mechanisms related to the structure of CO2 ice.

  19. Oil spreading in surface waters with an ice cover

    SciTech Connect (OSTI)

    Yapa, P.D.; Weerasuriya, S.A.; Belaskas, D.P.; Chowdhury, T.

    1993-02-01

    A study of oil spreading in surface waters in the presence of a floating ice cover is presented. The ice can be solid or fragmented. Both axi-symmetrical and uni-directional spreading are studied. The report describes the analytical and numerical model development, the experimental set-up, results from the laboratory experiments, and their comparison with the derived theory and the numerical simulation. To analyze the spreading of oil under solid ice, new equations are derived. These equations consider gravity (buoyancy) - inertia phase, gravity (buoyancy) - viscous phase, and the termination of spreading during the buoyancy - surface tension phase. The derivation considers both the constant discharge mode and the constant volume mode. Therefore, a complete description of the spreading phenomena from the time of initial spill to termination of spreading is presented. The emphasis of the study is on the dominant spreading mechanism for oil under ice, which is the buoyancy-viscous phase.

  20. Magnetization plateaus of dipolar spin ice on kagome lattice

    SciTech Connect (OSTI)

    Xie, Y. L.; Wang, Y. L.; Yan, Z. B.; Liu, J.-M.

    2014-05-07

    Unlike spin ice on pyrochlore lattice, the spin ice structure on kagome lattice retains net magnetic charge, indicating non-negligible dipolar interaction in modulating the spin ice states. While it is predicted that the dipolar spin ice on kagome lattice exhibits a ground state with magnetic charge order and ?3?×??3 spin order, our work focuses on the magnetization plateau of this system. By employing the Wang-Landau algorithm, it is revealed that the lattice exhibits the fantastic three-step magnetization in response to magnetic field h along the [10] and [01] directions, respectively. For the h//[1 0] case, an additional ?3/6M{sub s} step, where M{sub s} is the saturated magnetization, is observed in a specific temperature range, corresponding to a new state with charge order and short-range spin order.

  1. Thermal desorption of CH4 retained in CO2 ice

    E-Print Network [OSTI]

    R. Luna; C. Millan; M. Domingo; M. A. Satorre

    2008-01-21

    CO2 ices are known to exist in different astrophysical environments. In spite of this, its physical properties (structure, density, refractive index) have not been as widely studied as those of water ice. It would be of great value to study the adsorption properties of this ice in conditions related to astrophysical environments. In this paper, we explore the possibility that CO2 traps relevant molecules in astrophysical environments at temperatures higher than expected from their characteristic sublimation point. To fulfil this aim we have carried out desorption experiments under High Vacuum conditions based on a Quartz Crystal Microbalance and additionally monitored with a Quadrupole Mass Spectrometer. From our results, the presence of CH4 in the solid phase above the sublimation temperature in some astrophysical scenarios could be explained by the presence of several retaining mechanisms related to the structure of CO2 ice.

  2. Radio-frequency probes of Antarctic ice at South Pole

    E-Print Network [OSTI]

    Besson, David Zeke; Kravchenko, I.

    2013-05-16

    consistent with measurements in East Antarctica. Combined with other radio echo sounding data, we conclude that observed birefringent asymmetries at South Pole are generated entirely in the lower half of the ice sheet. By contrast, birefringent asymmetries...

  3. Determining Greenland Ice Sheet sensitivity to regional climate change: one-way coupling of a 3-D thermo-mechanical ice sheet model with a mesoscale climate model

    E-Print Network [OSTI]

    Schlegel, Nicole-Jeanne

    2011-01-01

    ice sheet model with a mesoscale climate model By Nicole-ice sheet model with a mesoscale climate model Copyrightice sheet model with a mesoscale climate model by Nicole-

  4. A Machine-by-Machine Analysis of a Bi-Objective Resource Allocation Problem

    E-Print Network [OSTI]

    Maciejewski, Anthony A. "Tony"

    , CO, 80523 Abstract-- As high performance computing systems contin- ually become faster, the operating of adding or removing machines from their high performance computing systems. We perform our study using the energy consumption more than doubled for high performance computing (HPC) systems, resulting in servers

  5. Introduction Machine Learning Suite XML Interface MLSuite Results Closing Remarks Machine Learning Suite Overview and Tutorial

    E-Print Network [OSTI]

    Wang, Xiaorui "Ray"

    Interface MLSuite Results Future Electrical Consumption EnergyPlus Approximation Inverse EnergyPlus Closing Learning Suite XML Interface MLSuite Results Future Electrical Consumption EnergyPlus Approximation Inverse EnergyPlus Closing Remarks Richard E. Edwards University of Tennessee Machine Learning Suite Overview

  6. JKernelMachines: A Simple Framework for Kernel Machines David Picard PICARD@ENSEA.FR

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . Description of the Library The backbone of the library is the definition of data types and kernels. In order to use any type of input space, the library makes heavy use o, France Editor: Abstract JKernelMachines is a Java library for learning with kernels. It is primarily

  7. IceCube: The state of the art

    E-Print Network [OSTI]

    Teresa Montaruli

    2006-08-09

    In this paper we describe the performance of the 9 instrumented IceCube strings and 16 surface IceTop stations taking data at the Geographical South Pole after 2 deployment seasons. We will focus on the description of the array and on the construction and data analysis status. The expected full array performance is discussed and compared to other results for the relevant physics studies using high energy neutrinos for astrophysical neutrino searches.

  8. Structure order, local potentials, and physical anomalies of water ice

    E-Print Network [OSTI]

    Chang Q Sun

    2014-07-11

    Hydrogen-bond forms a pair of asymmetric, coupled, H-bridged oscillators with ultra-short-range interactions and memory. hydrogen bond cooperative relaxation and the associated binding electron entrapment and nonbonding electron polarization discriminate water and ice from other usual materials in the physical anomalies. As a strongly correlated fluctuating system, water prefers the statistically mean of tetrahedrally-coordinated structure with a supersolid skin that is elastic, polarized, ice like, hydrophobic, with 3/4 density.

  9. Vision Machine & Fabrication Corp. Named Top Small Business Subcontrac...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vision Machine & Fabrication Corp. Named Top Small Business Subcontractor at Jefferson Lab for FY 2014 NEWPORT NEWS, VA, Sept. 10, 2015 - Jefferson Science Associates, the...

  10. Using support vector machines to improve elemental ion identification...

    Office of Scientific and Technical Information (OSTI)

    elemental ions in X-ray crystal structures has been extended to use support vector machine (SVM) classifiers trained on selected structures in the PDB, with significantly...

  11. Sandia gives Japanese elected official a tour of Z machine |...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gives Japanese elected official a tour of Z machine | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

  12. Next Generation Electric Machines: Megawatt Class Motors FOA Informational Webinar

    Broader source: Energy.gov [DOE]

    The Next Generation Electric Machines: Megawatt Class Motors FOA Informational Webinar will discuss standard procedures regarding the EERE Office and FOA process.

  13. High Metal Removal Rate Process for Machining Difficult Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    tool, milling operations where the cutting tool rotates against the workpiece, and drilling operations where holes are produced or refined. However, traditional machining...

  14. DOE Announces Webinars on Next Generation Electric Machines,...

    Broader source: Energy.gov (indexed) [DOE]

    April 1: Live Webinar on Next Generation Electric Machines: Megawatt Class Motors FOA Webinar Sponsor: Advanced Manufacturing Office The Energy Department will present a live...

  15. Efficiency of autonomous soft nano-machines at maximum power

    E-Print Network [OSTI]

    Udo Seifert

    2010-11-11

    We consider nano-sized artificial or biological machines working in steady state enforced by imposing non-equilibrium concentrations of solutes or by applying external forces, torques or electric fields. For unicyclic and strongly coupled multicyclic machines, efficiency at maximum power is not bounded by the linear response value 1/2. For strong driving, it can even approach the thermodynamic limit 1. Quite generally, such machines fall in three different classes characterized, respectively, as "strong and efficient", "strong and inefficient", and "balanced". For weakly coupled multicyclic machines, efficiency at maximum power has lost any universality even in the linear response regime.

  16. Hybrid MPI/OpenMP parallel support vector machine training

    E-Print Network [OSTI]

    Kristian Woodsend

    2009-01-12

    Jan 12, 2009 ... A parallel implementation of Support Vector Machine training has been developed, using a combination of MPI and OpenMP. Using an interior ...

  17. Machine Tool Design and Operation Strategies for Green Manufacturing

    E-Print Network [OSTI]

    2010-01-01

    machine tool during its manufacture and use, respectively.calculator” related to part manufacture which allowed thecycle, such as its manufacture, are neglected. Furthermore,

  18. Power Electronics and Electric Machines Merit Review, May 2005...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Power Electronics and Electrical Machines Review, August 2006 Advanced Soft Switching Inverter for Reducing Switching and Power Losses Eliminating High Risk Work at Hanford...

  19. Multi-group Support Vector Machines with measurement costs

    E-Print Network [OSTI]

    Emilio Carrizosa

    2006-05-11

    May 11, 2006 ... Multi-group Support Vector Machines with measurement costs: a biobjective approach. Emilio Carrizosa (ecarrizosa ***at*** us.es)

  20. Sputtering of Oxygen Ice by Low Energy Ions

    E-Print Network [OSTI]

    Muntean, E A; Field, T A; Fitzsimmons, A; Hunniford, C A; McCullough, R W

    2015-01-01

    Naturally occurring ices lie on both interstellar dust grains and on celestial objects, such as those in the outer solar system. These ices are continu- ously subjected to irradiation by ions from the solar wind and/or cosmic rays, which modify their surfaces. As a result, new molecular species may form which can be sputtered off into space or planetary atmospheres. We determined the experimental values of sputtering yields for irradiation of oxygen ice at 10 K by singly (He+, C+, N+, O+ and Ar+) and doubly (C2+, N2+ and O2+) charged ions with 4 keV kinetic energy. In these laboratory experiments, oxygen ice was deposited and irradiated by ions in an ultra high vacuum chamber at low temperature to simulate the environment of space. The number of molecules removed by sputtering was observed by measurement of the ice thickness using laser interferometry. Preliminary mass spectra were taken of sputtered species and of molecules formed in the ice by temperature programmed desorption (TPD). We find that the experi...