Powered by Deep Web Technologies
Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Design options for clothes washers  

E-Print Network (OSTI)

Clothes Dryers, and Dishwasher. (61 Federal Register 17589,Clothes Dryers and Dishwashers, SAI-77-839, La Jolla, CA.for Consumer Products: Dishwashers, Clothes Washers, and

Biermayer, Peter J.

1996-01-01T23:59:59.000Z

2

CHLORIDE WASHER PERFORMACE TESTING  

SciTech Connect

Testing was performed to determine the chloride (Cl-) removal capabilities of the Savannah River National Laboratory (SRNL) designed and built Cl- washing equipment intended for HB-Line installation. The equipment to be deployed was tested using a cerium oxide (CeO2) based simulant in place of the 3013 plutonium oxide (PuO2) material. Two different simulant mixtures were included in this testing -- one having higher Cl- content than the other. The higher Cl- simulant was based on K-Area Interim Surveillance Inspection Program (KIS) material with Cl- content approximately equal to 70,000 ppm. The lower Cl- level simulant was comparable to KIS material containing approximately 8,000-ppm Cl- content. The performance testing results indicate that the washer is capable of reducing the Cl- content of both surrogates to below 200 ppm with three 1/2-liter washes of 0.1M sodium hydroxide (NaOH) solution. Larger wash volumes were used with similar results - all of the prescribed test parameters consistently reduced the Cl- content of the surrogate to a value below 200 ppm Cl- in the final washed surrogate material. The washer uses a 20-micron filter to retain the surrogate solids. Tests showed that 0.16-0.41% of the insoluble fraction of the starting mass passed through the 20-micron filter. The solids retention performance indicates that the fissile masses passing through the 20-micron filter should not exceed the waste acceptance criteria for discard in grout to TRU waste. It is recommended that additional testing be pursued for further verification and optimization purposes. It is likely that wash volumes smaller than those tested could still reduce the Cl- values to acceptable levels. Along with reduced wash volumes, reuse of the third wash volume (in the next run processed) should be tested as a wash solution minimization plan. A 67% reduction in the number of grouted paint pails could be realized if wash solution minimization testing returned acceptable results.

Coughlin, J; David Best, D; Robert Pierce, R

2007-11-30T23:59:59.000Z

3

IRLab shop area  

NLE Websites -- All DOE Office Websites (Extended Search)

The IRLab machine tool shop contains a variety of equipment for working with metal, wood, and plastic. This facility is used extensively by researchers from in the Optics Lab...

4

Preliminary engineering analysis for clothes washers  

E-Print Network (OSTI)

This is total washer and dryer energy usage in kWh for anenergy usage to the rated volume by dividing the clothes container volume by the total

Biermayer, Peter J.

1996-01-01T23:59:59.000Z

5

Bern clothes washer study. Final report  

SciTech Connect

The US market for domestic clothes washers is currently dominated by conventional, vertical axis washers, which typically require about 40 gallons of water for each load. Although small for an individual load, the fact that 35 billion loads of laundry are washed annually in the US results in a substantial quantity of water and energy use. Although much smaller, today`s market for high-efficiency clothes washers which use much less water and energy is growing albeit slowly as manufacturers are making washers based around tumble-action, horizontal axis designs available, information about their performance and benefits is being developed, and consumers are made aware of these benefits. To help build awareness of these benefits and to accelerate markets for high-efficiency washers, DOE, under its Energy Star Program and in cooperation with Maytag Appliances, conducted a field-evaluation of high-efficiency washers using Bern, Kansas (population approximately 200) as a test bed. Baseline washer performance data as well as customer washing behavior were obtained from data collected on the existing washers of more than 100 participants in this instrumented study. Following a 2-month initial study period, all conventional washers were replaced by high-efficiency, tumble action washers, and the experiment continued for another 3-month period. Based on measured data from over 20,000 loads of laundry, the impact of the washer replacement on (1) individual customers` energy and water consumption, (2) customers` laundry habits and perceptions, and (3) the community`s water supply and waste water systems were determined and reported.

Tomlinson, J.J.; Rizy, D.T.

1998-03-01T23:59:59.000Z

6

APS LOM Shop Usage  

NLE Websites -- All DOE Office Websites (Extended Search)

Division XSD Groups Industry Argonne Home Advanced Photon Source APS LOM Shop Usage User Shop Access - Policies and Procedures User Shop Orientation User Shop...

7

Electrolux Gibson Air Conditioner and Equator Clothes Washer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing...

8

DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process...

9

Tips: Shopping for Appliances | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tips: Shopping for Appliances Tips: Shopping for Appliances Tips: Shopping for Appliances April 24, 2012 - 7:33pm Addthis What's the Real Cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. What's the Real Cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new appliance. When you're shopping for appliances, think of two price tags. The first one covers the purchase price -- think of it as a down payment. The second price tag is the cost of operating the appliance during its lifetime. You'll be paying on that second price tag every month with your utility bill for the next 10 to 20 years, depending on the appliance. Refrigerators last an average of 12 years; clothes washers about 11 years; dishwashers

10

List of Clothes Washers Incentives | Open Energy Information  

Open Energy Info (EERE)

Clothes Washers Incentives Clothes Washers Incentives Jump to: navigation, search The following contains the list of 514 Clothes Washers Incentives. CSV (rows 1-500) CSV (rows 501-514) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Alabama - Residential Energy-Efficient Appliance Rebate Program (Alabama) State Rebate Program Alabama Residential Clothes Washers Dishwasher Refrigerators No Alaska - Residential Energy-Efficient Appliance Rebate Program (Alaska) State Rebate Program Alaska Residential Clothes Washers Dishwasher Refrigerators No Alexandria Light and Power - Residential Energy Efficiency Rebate Program (Minnesota) Utility Rebate Program Minnesota Residential Central Air conditioners Clothes Washers Dehumidifiers Dishwasher

11

DOE Seeks Comment on Application of Clothes Washer Test Procedure |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Application of Clothes Washer Test Procedure Application of Clothes Washer Test Procedure DOE Seeks Comment on Application of Clothes Washer Test Procedure June 30, 2010 - 3:02pm Addthis Today, the U.S. Department of Energy (DOE) issued a draft interpretative rule clarifying its views on the application of the current residential clothes washer test procedure to machines that offer a warm rinse option that is not included in the recommended cycle for washing cotton or linen clothes. The Department is soliciting feedback from the public on the draft interpretive rule, which is available here, until July 30, 2010. Addthis Related Articles Save Energy and More with ENERGY STAR. ENERGY STAR clothes washers use 50% less energy to wash clothes than standard washing machines. Tips: Laundry DOE Solicits Views on the Implementation of Large-Capacity Clothes Washer

12

Covered Product Category: Clothes Washers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clothes Washers Clothes Washers Covered Product Category: Clothes Washers October 7, 2013 - 11:16am Addthis ENERGY STAR Qualified Products FEMP provides acquisition guidance across a variety of product categories, including clothes washers, which are an ENERGY STAR®-qualified product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Most manufacturers display the ENERGY STAR label on complying models. For a model not displaying this label, check the manufacturer's literature to determine if it meets the efficiency requirements outlined by ENERGY STAR. This product category overview covers the following: Performance Requirements for Federal Purchases

13

New Energy Efficiency Standards for Residential Clothes Washers...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Standards for Residential Clothes Washers and Dishwashers to Save Consumers Billions on Energy Bills New Energy Efficiency Standards for Residential Clothes...

14

Gross Wash Project in Washers of Red Mud Filtration  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium , Alumina and Bauxite. Presentation Title, Gross Wash Project in Washers of ...

15

Covered Product Category: Clothes Washers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clothes Washers Clothes Washers Covered Product Category: Clothes Washers October 7, 2013 - 11:16am Addthis ENERGY STAR Qualified Products FEMP provides acquisition guidance across a variety of product categories, including clothes washers, which are an ENERGY STAR®-qualified product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law. Most manufacturers display the ENERGY STAR label on complying models. For a model not displaying this label, check the manufacturer's literature to determine if it meets the efficiency requirements outlined by ENERGY STAR. This product category overview covers the following: Performance Requirements for Federal Purchases

16

JEA - ShopSmart Residential Rebate Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

JEA - ShopSmart Residential Rebate Program JEA - ShopSmart Residential Rebate Program JEA - ShopSmart Residential Rebate Program < Back Eligibility Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Sealing Your Home Ventilation Heat Pumps Commercial Lighting Lighting Windows, Doors, & Skylights Maximum Rebate Limit one rebate per appliance type per customer Insulation: $250 Program Info Start Date 12/01/2009 State Florida Program Type Utility Rebate Program Rebate Amount CFLs: Up to a $1.25 markdown per product in stores Refrigerators: $25 Clothes Washers: $25 Window Film/Solar Screens: $30/window - South, east, and west exposures only - up to $300 Insulation: $0.30/square foot

17

Land of Enchantment's Appliance Rebate Program Spurs Shopping | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Land of Enchantment's Appliance Rebate Program Spurs Shopping Land of Enchantment's Appliance Rebate Program Spurs Shopping Land of Enchantment's Appliance Rebate Program Spurs Shopping September 20, 2010 - 10:00am Addthis Lindsay Gsell What does this project do? Issued 8830 appliance rebates in Arizona. One local business saw an 80% sales increase weeks after the launch of the appliance rebate program. Rebates can add up quickly - especially when 8,830 are issued. Through Recovery Act funding, New Mexico has distributed about 8,830 rebates worth $200 for ENERGY STAR qualified refrigerators, clothes washers and gas furnaces. The state's appliance rebate program launched on April 22 -- Earth Day -- and is currently winding down, with a little more than $125,000 available for furnace rebates. Program manager Harold Trujillo says that more than half the rebates were

18

DOE Seeks Comment on Application of Clothes Washer Test Procedure |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seeks Comment on Application of Clothes Washer Test Procedure Seeks Comment on Application of Clothes Washer Test Procedure DOE Seeks Comment on Application of Clothes Washer Test Procedure June 30, 2010 - 3:02pm Addthis Today, the U.S. Department of Energy (DOE) issued a draft interpretative rule clarifying its views on the application of the current residential clothes washer test procedure to machines that offer a warm rinse option that is not included in the recommended cycle for washing cotton or linen clothes. The Department is soliciting feedback from the public on the draft interpretive rule, which is available here, until July 30, 2010. Addthis Related Articles DOE Seeks Comment on Definition of Showerhead Save Energy and More with ENERGY STAR. ENERGY STAR clothes washers use 50% less energy to wash clothes than standard washing machines.

19

New Energy Efficiency Standards for Residential Clothes Washers and  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Energy Efficiency Standards for Residential Clothes Washers and New Energy Efficiency Standards for Residential Clothes Washers and Dishwashers to Save Consumers Billions on Energy Bills New Energy Efficiency Standards for Residential Clothes Washers and Dishwashers to Save Consumers Billions on Energy Bills May 16, 2012 - 1:08pm Addthis News Media Contact (202) 586-4940 WASHINGTON - As part of the Obama Administration's focus on taking sensible steps to save families money while also reducing energy consumption, the Department of Energy today announced common-sense energy efficiency standards for residential clothes washers and dishwashers that will save consumers $20 billion in energy and water costs. The new standards for both clothes washers and dishwashers were informed by important feedback from manufacturers, consumer groups and environmental

20

Enabling Technologies for Communities at Web Shops  

Science Conference Proceedings (OSTI)

This paper identifies needs for communities at web shops. Different types of communities are classified and rated according to their value for e-commerce sites. Three virtual stores and one external instant messaging and presence tool are observed regarding ...

Till Schümmer

2002-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Clothes Washers, Purchasing Specifications for Energy-Efficient Products (Fact Sheet)  

SciTech Connect

Performance and purchasing specifications for residential clothes washers under the FEMP-designated product program.

2010-06-01T23:59:59.000Z

22

Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing October 6, 2010 - 10:08am Addthis DOE testing in support of the ENERGY STAR program has revealed that an Electrolux Gibson air conditioner (model GAH105Q2T1) and an Equator clothes washer (model EZ 3720 CEE), both of which claimed ENERGY STAR ratings, do not meet the ENERGY STAR requirements. Specifically, the test results for the Electrolux Gibson model show that, when tested in accordance with DOE's test procedures, it consumed 6.1 percent more energy than the Energy Star requirement. Test results for the Equator model show that it exceeds Energy Star's water factor requirements by 12.3 percent.

23

EA-1695: Energy Conservation Standards for Residential Clothes Washers  

Energy.gov (U.S. Department of Energy (DOE))

This EA will evaluate the environmental impacts of a proposal to amend energy conservation standards for residential clothes washers pursuant to 42 U.S.C. 6295(g)(9)(B)(i).

24

Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing October 6, 2010 - 10:08am Addthis DOE testing in support of the ENERGY STAR program has revealed that an Electrolux Gibson air conditioner (model GAH105Q2T1) and an Equator clothes washer (model EZ 3720 CEE), both of which claimed ENERGY STAR ratings, do not meet the ENERGY STAR requirements. Specifically, the test results for the Electrolux Gibson model show that, when tested in accordance with DOE's test procedures, it consumed 6.1 percent more energy than the Energy Star requirement. Test results for the Equator model show that it exceeds Energy Star's water factor requirements by 12.3 percent.

25

Insanely Fast Microprocessor Shop - Vulnerability Assessment Team - Nuclear  

NLE Websites -- All DOE Office Websites (Extended Search)

Insanely Fast Microprocessor Shop Insanely Fast Microprocessor Shop VAT Projects Introducing the VAT Adversarial Vulnerability Assessments Safety Tags & Product Counterfeiting Election Security Spoofing GPS Defeating Existing Tamper-Indicating Seals Specialty Field Tools & Sampling Tools Insider Threat Mitigation Drug Testing Security Microprocessor Prototypes The Journal of Physical Security Vulnerability Assessments Vulnerability Assessments Insanely Fast µProcessor Shop Insanely Fast µProcessor Shop Seals About Seals Applications of Seals Common Myths about Tamper Indicating Seals Definitions Findings and Lessons Learned New Seals Types of Seals Seals References Selected VAT Papers Selected VAT Papers Selected Invited Talks Self-Assessment Survey Security Maxims Devil's Dictionary of Security Terms

26

Comparison shopping on the internet  

Science Conference Proceedings (OSTI)

Though comparison shopping is used widely by online shoppers, very little research exists about how comparison shoppers differ from those who are not involved in comparison shopping. A survey of 208 US consumers identified comparison shoppers, both on ... Keywords: USA, United States, comparison shopping, consumer attitudes, e-commerce, e-shopping, e-tailing, electronic commerce, electronic retailing, factors, internet, online shopping

Michael Klassen; Pola Gupta; Matthew P. Bunker

2009-05-01T23:59:59.000Z

27

Argonne Software Shop  

Argonne Software Shop. Argonne's researchers have created a wealth of powerful software and models with broad-ranging applications. In addition to ...

28

ENERGY STAR Qualified Commercial Clothes Washers | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial Clothes Washers Commercial Clothes Washers Consumer Data Apps Challenges Resources About Blogs Let's Talk Feedback Consumer You are here Data.gov » Communities » Consumer » Data ENERGY STAR Qualified Commercial Clothes Washers Dataset Summary Description Tags Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Resource Type Metadata Date Responsible Party Contact Email State Access Constraints Bbox East Long Bbox North Lat Bbox South Lat Bbox West Long Coupled Resource Reference Date(s) Frequency Of Update Guid Licence Metadata Language Provider Spatial Spatial Data Service Type Spatial Reference System Temporal Coverage From Temporal Coverage To Download Information XML Used by automated programs capable of handling raw XML files.

29

The urban coffee shop  

E-Print Network (OSTI)

This thesis is an investigation of the role of the coffee shop in the urban environment throughout history. Coffee shops spread from the Arab world to Europe and then to the U.S. at the end of the seventeenth century. ...

Chadios, Konstantinos

2005-01-01T23:59:59.000Z

30

GE to DOE General Counsel; Re:Request for Comment on Large Capacity Clothes Washers  

Energy.gov (U.S. Department of Energy (DOE))

GE urges the department engage in rulmaking to amend the clothes washer test procedure to reflect efficiency standards of large-capacity residential clothes washer machines. GE also urges the DOE...

31

Energy Department Sets Tougher Standards for Clothes Washers to Qualify for  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sets Tougher Standards for Clothes Washers to Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR® Label Energy Department Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR® Label December 19, 2005 - 4:49pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced tougher standards for clothes washers to qualify for the ENERGY STAR® label, which lets American families identify which clothes washers save the most energy and use the least water. The new standards take effect January 1, 2007, and will increase the efficiency of new clothes washers up to 37 percent. The more energy-efficient clothes washers will have the potential to save up to $70 million in energy bills and 8.9 billion gallons of water each year. "With these tougher ENERGY STAR® standards, families will be able to

32

Business expansion and lean transformation for helicopter blade shop  

E-Print Network (OSTI)

Sikorsky Aircraft is undergoing a lean transformation as its helicopter blade line is relocated from Stratford to Site B. Value Stream Mapping is a vital tool to eliminate sources of waste in the existing blade shop and ...

Bar, S. Neil (Saumen Neil)

2006-01-01T23:59:59.000Z

33

Residential Clothes Washers Test Procedure Notice of Proposed Rulemaking  

NLE Websites -- All DOE Office Websites (Extended Search)

19:12 Sep 20, 2010 19:12 Sep 20, 2010 Jkt 220001 PO 00000 Frm 00001 Fmt 4717 Sfmt 4717 E:\FR\FM\21SEP2.SGM 21SEP2 srobinson on DSKHWCL6B1PROD with PROPOSALS2 Tuesday, September 21, 2010 Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers; Proposed Rule VerDate Mar2010 19:12 Sep 20, 2010 Jkt 220001 PO 00000 Frm 00002 Fmt 4701 Sfmt 4702 E:\FR\FM\21SEP2.SGM 21SEP2 srobinson on DSKHWCL6B1PROD with PROPOSALS2 57556 Federal Register / Vol. 75, No. 182 / Tuesday, September 21, 2010 / Proposed Rules DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers AGENCY: Office of Energy Efficiency and

34

Horizontal-axis clothes washer market poised for expansion  

SciTech Connect

The availability of energy- and water-efficient horizontal-axis washing machines in the North American market is growing, as US and European manufacturers position for an expected long-term market shift toward horizontal-axis (H-axis) technology. Four of the five major producers of washing machines in the US are developing or considering new H-axis models. New entrants, including US-based Staber Industries and several European manufacturers, are also expected to compete in this market. The intensified interest in H-axis technology is partly driven by speculation that new US energy efficiency standards, to be proposed in 1996 and implemented in 1999, will effectively mandate H-axis machines. H-axis washers typically use one-third to two-thirds less energy, water, and detergent than vertical-axis machines. Some models also reduce the energy needed to dry the laundry, since their higher spin speeds extract more water than is typical with vertical-axis designs. H-axis washing machines are the focus of two broadly-based efforts to support coordinated research and incentive programs by electric, gas, and water utilities: The High-Efficiency Laundry Metering/Marketing Analysis (THELMA), and the Consortium for Energy Efficiency (CEE) High-Efficiency Clothes Washer Initiative. These efforts may help to pave the way for new types of marketing partnerships among utilities and other parties that could help to speed adoption of H-axis washers.

George, K.L.

1994-12-31T23:59:59.000Z

35

An inlet air washer/chiller system for combined cycle planet repowering  

Science Conference Proceedings (OSTI)

A conditioning method to achieve increased output at any relative humidity condition is an air washer and absorption chiller arrangement. At elevated temperatures and low humidity, the air washer operates as an evaporative cooler without the chiller in operation. In this mode, the air washer will give similar results as a media type evaporative cooler at a fraction of the pressure loss. In the air washer plus chiller operating mode the chiller maintains cooling effectiveness of the air washer during periods of high relative humidity. This makes such a system very appropriate anywhere relative humidity is high. Many combined cycle plants utilize supplemental firing of the heat recovery steam generators to offset the loss of gas turbine power at high ambient temperatures. This paper shows that in contrast to supplementary firing, the combination air washer/chiller system can generate power more efficiently and at lower cost.

Sengupta, U.; Soroka, G. (Bechtel Power Corp., Gaithersburg, MD (USA))

1989-01-01T23:59:59.000Z

36

Final Technical Report Steam Cycle Washer for Unbleached Pulp  

SciTech Connect

Project Abstract for “Steam Cycle Washer for Unbleached Pulp” When completed, the patented SC Washer will provide an innovative, energy efficient demonstration project to wash unbleached pulp using a pressure vessel charged with steam. The Port Townsend Paper Corporation’s pulp mill in Port Townsend, WA was initially selected as the host site for conducting the demonstration of the SCW. Due to 2006 and 2007 delays in the project caused by issues with 21st Century Pulp & Paper, the developer of the SCW, and the 2007 bankruptcy proceedings and subsequent restructuring at Port Townsend Paper, the mill can no longer serve as a host site. An alternate host site is now being sought to complete the commercial demonstration of the Steam Cycle Washer for Unbleached Pulp. Additionally, estimated costs to complete the project have more than doubled since the initial estimates for the project were completed in 2002. Additional grant funding from DOE was sought and in July, 2008 the additional DOE funds were procured under a new DOE award, DE-PS36-08GO98014 issued to INL. Once the new host site is secured the completion of the project will begin under the management of INL. Future progress reports and milestone tracking will be completed under requirements of new DOE Award Number DE-PS36-08GO98014. The following are excerpts from the project Peer Review completed in 2006. They describe the project in some detail. Additional information can be found by reviewing DOE Award Number: DE-PS36-08GO98014. 5. Statement of Problem and Technical Barriers: The chemical pulping industry is one of the major users of fresh water in the United States. On average the industry uses over 80 tons of water to produce one ton of pulp, some states use up to 50% more (Washington 120 and Wisconsin 140). In order to process one ton of pulp using 80 tons of process water, a large amount of: • energy is used in process heat and • power is required for pumping the large volume of pulp slurries through the pulping phases. Most water used in the pulping process ends up as warm waste water in the mill’s effluent discharge, which subsequently pollutes receiving waterways and carries an enormous amount of energy with it. Wash water reduction in brown stock washing with the Steam Cycle Washers (SCW) will save energy, up to 1+ million BTUs per ton of pulp in the evaporators alone. Reduction of liquid volume through bleaching stages will save process heat energy in the amount of 2+ million BTUs per ton of pulp, and as much as 80 – 100 kWhrs of electrical power per ton of pulp due to reduced pumping costs. Currently, the technical barriers to water reduction in chemical pulping are basically as follows: • conventional pulp washers wash the pulp at 10 - 14% consistency, • conventional pulp washers use 12 – 16 tons of wash water per ton of pulp, and • they leave 30 – 70 lbs of soda (Na2SO4) per ton of pulp as soda loss into the washed pulp. The amount of wash water in excess of the amount of process liquid in the pulp is called Dilution Factor (DF), even though it is not a factor in the mathematical sense but an addition. Modern pulp washing lines can wash efficiently with a DF of 3 but most pulp mills in the United States are washing with a DF of 5-7. Therefore, at 10% washing consistency 14-16 tons of wash water is required and 14% consistency requires 11-13 tons of wash water.

Starkey, Yvonne; Salminen, Reijo; Karlsnes, Andy

2008-09-22T23:59:59.000Z

37

DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issues Enforcement Guidance on Large-Capacity Clothes Washer Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process December 23, 2010 - 5:14pm Addthis Today, the Department of Energy issued enforcement guidance on the application of recently granted waivers for large-capacity clothes washers and announced steps to improve the waiver process - and refrain from certain enforcement actions - so that innovative covered products can demonstrate compliance with DOE efficiency requirements and come to market without undue delays. Based on comments received in response to DOE's November 30, 2010 notice, today's guidance makes clear that DOE's current test procedure does not cover large-capacity clothes washers and,

38

DOE Solicits Views on the Implementation of Large-Capacity Clothes Washer  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solicits Views on the Implementation of Large-Capacity Clothes Solicits Views on the Implementation of Large-Capacity Clothes Washer Waivers DOE Solicits Views on the Implementation of Large-Capacity Clothes Washer Waivers November 30, 2010 - 10:56am Addthis The Department of Energy has recently granted several requests for waivers establishing an alternative test procedure for certain large-capacity residential clothes washer models. We have now received follow-up questions about the proper application of these waivers. Since these questions affect multiple manufacturers and the public, we have decided the proper course is to invite interested parties to submit views on the proper application of these waivers to existing clothes washer models and units by Tuesday, December 7th. The Department's current test procedure for residential clothes washers

39

DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Issues Enforcement Guidance on Large-Capacity Clothes Washer Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process December 23, 2010 - 5:14pm Addthis Today, the Department of Energy issued enforcement guidance on the application of recently granted waivers for large-capacity clothes washers and announced steps to improve the waiver process - and refrain from certain enforcement actions - so that innovative covered products can demonstrate compliance with DOE efficiency requirements and come to market without undue delays. Based on comments received in response to DOE's November 30, 2010 notice, today's guidance makes clear that DOE's current test procedure does not cover large-capacity clothes washers and,

40

Heavy Machine Shop | Central Fabrication Services | Brookhaven...  

NLE Websites -- All DOE Office Websites (Extended Search)

Heavy Machine Shop Heavy Machine Shop The Heavy Machine Shop facility is located in building 479, and may be accessed by the main door on the north face or front of the building....

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Measured impacts of high efficiency domestic clothes washers in a community  

SciTech Connect

The US market for domestic clothes washers is currently dominated by conventional vertical-axis washers that typically require approximately 40 gallons of water for each wash load. Although the current market for high efficiency clothes washers that use much less water and energy is quite small, it is growing slowly as manufacturers make machines based on tumble action, horizontal-axis designs available and as information about the performance and benefits of such machines is developed and made available to consumers. To help build awareness of these benefits and to accelerate markets for high efficiency washers, the Department of Energy (DOE), under its ENERGY STAR{reg_sign} Program and in cooperation with a major manufacturers of high efficiency washers, conducted a field evaluation of high efficiency washers using Bern, Kansas as a test bed. Baseline washing machine performance data as well as consumer washing behavior were obtained from data collected on the existing machines of more than 100 participants in this instrumented study. Following a 2-month initial study period, all conventional machines were replaced by high efficiency, tumble-action washers, and the study continued for 3 months. Based on measured data from over 20,000 loads of laundry, the impact of the washer replacement on (1) individual customers` energy and water consumption, (2) customers` laundry habits and perceptions, and (3) the community`s water supply and waste water systems were determined. The study, its findings, and how information from the experiment was used to improve national awareness of high efficiency clothes washer benefits are described in this paper.

Tomlinson, J.; Rizy, T.

1998-07-01T23:59:59.000Z

42

Method for Evaluating Energy Use of Dishwashers, Clothes Washers, and Clothes Dryers: Preprint  

SciTech Connect

Building America teams are researching opportunities to improve energy efficiency for some of the more challenging end-uses, such as lighting (both fixed and occupant-provided), appliances (clothes washer, dishwasher, clothes dryer, refrigerator, and range), and miscellaneous electric loads, which are all heavily dependent on occupant behavior and product choices. These end-uses have grown to be a much more significant fraction of total household energy use (as much as 50% for very efficient homes) as energy efficient homes have become more commonplace through programs such as ENERGY STAR and Building America. As modern appliances become more sophisticated the residential energy analyst is faced with a daunting task in trying to calculate the energy savings of high efficiency appliances. Unfortunately, most whole-building simulation tools do not allow the input of detailed appliance specifications. Using DOE test procedures the method outlined in this paper presents a reasonable way to generate inputs for whole-building energy-simulation tools. The information necessary to generate these inputs is available on Energy-Guide labels, the ENERGY-STAR website, California Energy Commission's Appliance website and manufacturer's literature. Building America has developed a standard method for analyzing the effect of high efficiency appliances on whole-building energy consumption when compared to the Building America's Research Benchmark building.

Eastment, M.; Hendron, R.

2006-08-01T23:59:59.000Z

43

Method for Evaluating Energy Use of Dishwashers, Clothes Washers, and Clothes Dryers: Preprint  

SciTech Connect

Building America teams are researching opportunities to improve energy efficiency for some of the more challenging end-uses, such as lighting (both fixed and occupant-provided), appliances (clothes washer, dishwasher, clothes dryer, refrigerator, and range), and miscellaneous electric loads, which are all heavily dependent on occupant behavior and product choices. These end-uses have grown to be a much more significant fraction of total household energy use (as much as 50% for very efficient homes) as energy efficient homes have become more commonplace through programs such as ENERGY STAR and Building America. As modern appliances become more sophisticated the residential energy analyst is faced with a daunting task in trying to calculate the energy savings of high efficiency appliances. Unfortunately, most whole-building simulation tools do not allow the input of detailed appliance specifications. Using DOE test procedures the method outlined in this paper presents a reasonable way to generate inputs for whole-building energy-simulation tools. The information necessary to generate these inputs is available on Energy-Guide labels, the ENERGY-STAR website, California Energy Commission's Appliance website and manufacturer's literature. Building America has developed a standard method for analyzing the effect of high efficiency appliances on whole-building energy consumption when compared to the Building America's Research Benchmark building.

Eastment, M.; Hendron, R.

2006-08-01T23:59:59.000Z

44

A hybrid genetic tabu search algorithm for solving job shop scheduling problems: a case study  

Science Conference Proceedings (OSTI)

In recent decades many attempts have been made at the solution of Job Shop Scheduling Problem using a varied range of tools and techniques such as Branch and Bound at one end of the spectrum and Heuristics at the other end. However, the literature reviews ... Keywords: Genetic algorithms, Hybrid systems, Job shop, Scheduling, Tabu search

S. Meeran; M. S. Morshed

2012-08-01T23:59:59.000Z

45

From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency  

Open Energy Info (EERE)

From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency Agency/Company /Organization: Pew Center on Global Climate Change Sector: Energy Focus Area: Energy Efficiency Topics: Policies/deployment programs Resource Type: Lessons learned/best practices Website: www.pewclimate.org/docUploads/PEW_EnergyEfficiency_FullReport.pdf References: From Shop Floor to Top Floor: Best Business Practices in Energy Efficiency[1] FROM SHOP FLOOR TO TOP FLOOR: BEST BUSINESS PRACTICES IN ENERGY EFFICIENCY. Pew Center on Global Climate Change. William R. Prindle. April 2010. In the last decade, rising and volatile energy prices coupled with

46

Clothes washer standards in China -- The problem of water and energy trade-offs in establishing efficiency standards  

E-Print Network (OSTI)

China clothes washer standard, April 9, 2003 Jiang Lin.2003c. “Appliance Standards and National Labeling Program. ”Efficiency Potential of Standards and Labeling in China” .

Biermayer, Peter J.; Lin, Jiang

2004-01-01T23:59:59.000Z

47

Design guidelines for downtown shopping centers  

E-Print Network (OSTI)

This thesis focuses on urban design issues germane to downtown shopping center design. The underlying concept is that, all new downtown shopping centers should attempt to build upon the existing fabric in such a way as to ...

McGhee, Billy Kevin

1987-01-01T23:59:59.000Z

48

Remote Food Shopping Robot System in a Supermarket Realization of the shopping task from remote places  

E-Print Network (OSTI)

the experimental result performed with the integrated system. Index Terms-- Remote shopping, Foods handling, Human dailylifeRemote shopping, Foods handling, Human dailylife I. INTRODUCTION In this research we focusedRemote Food Shopping Robot System in a Supermarket ­Realization of the shopping task from remote

Ohya, Akihisa

49

CAST SHOP TECHNOLOGY: V: Cast House Safety  

Science Conference Proceedings (OSTI)

TMS Logo. 1997 TMS Annual Meeting: Wednesday Session. CAST SHOP TECHNOLOGY: Session V: Cast House Safety. Sponsored by: LMD Aluminum ...

50

Energy consumption and usage characteristics from field measurements of residential dishwashers, clothes washers and clothes dryers  

SciTech Connect

The measured energy consumption and usage characteristics for household dishwashers, clothes washers, and clothes dryers for ten townhouses at Twin Rivers, N.J., are presented. Whenever the dishwashers and/or clothes washers were in use, the energy consumption, water consumption, frequency of usage, and water temperature were measured by a data acquisition system. The electrical energy of electric clothes dryers and the gas consumption of gas clothes dryers were measured, as well as their frequency and duration of use, and exhaust temperature. Typical household usage patterns of these major appliances are included.

Chang, Y.L.; Grot, R.A.

1980-10-01T23:59:59.000Z

51

Machine Shop Investigates PQ Issues  

Science Conference Proceedings (OSTI)

EPRI performed a power quality (PQ) audit to harden a machine shop against PQ-related issues. EPRI engineers investigated the various origins of existing PQ disturbances as well as the susceptibility of the plant equipment to these disturbances. This case study reports the findings of this detailed investigation.

2007-12-31T23:59:59.000Z

52

Remote foods shopping robot system in a supermarket Tetsuo TOMIZAWA, National Inst. of Advanced Industrial Science and Technology  

E-Print Network (OSTI)

with the integrated system. Key Words: Remote shopping, Foods handling, Human interface 1. [1] 2 Remote foods shopping robot system in a supermarket Tetsuo TOMIZAWA, National Inst as a teleoperated tool for accessing and manipulating remote objects. This system attempts to answer the challenge

Ohya, Akihisa

53

Design and testing of a PFN for the washer-gun in SYMPLE  

Science Conference Proceedings (OSTI)

A Pulse Forming Network (PFN) with mutual coupling has been designed, developed and tested for its performance as a pulsed (? 100 µs) high voltage (up to 10 KV) source for washer gun plasma production in SYMPLE (SYstem for Microwave PLasma Experiments). ...

Priyavandna J. Rathod; V. P. Anitha; Z. H. Sholapurwala; Jayesh Raval; Renu Bahl; Y. C. Saxena

2011-02-01T23:59:59.000Z

54

One Stop Information Shop: Personalized Content Recommendations  

4 Managed by UT-Battelle One Stop Information Shop: Personalized Content Recommendations for the U.S. Department of Energy Technology Leadership

55

One Stop Information Shop: Personalized Content Recommendations  

Onefor the U.S. Department of Energy Stop Information Shop Problem . 3 Managed by UT-Battelle ... • Concept works in prototype, market acceptance unknown

56

Solving production scheduling problems using advanced model checking tools  

Science Conference Proceedings (OSTI)

The main scope of this paper is the implementation of a method for production scheduling, using advanced model checking tools. This method makes use of timed automata to model complex production scheduling problems such as the job-shop and the open-shop ... Keywords: distributed manufacturing, job-shops, model checking, production scheduling, timed automata

Dimitrios Panopoulos; Kostas Metaxiotis

2006-06-01T23:59:59.000Z

57

Safety_Tips_for_Christmas_Shopping-DEC-2011  

NLE Websites -- All DOE Office Websites (Extended Search)

Christmas Shopping The holiday shopping season can be a time of great joy safety risks. Below are some safety tips to keep in mind while shopping. * Carry a cell phone and program...

58

Microsoft Word - LG response to DOE letter to clothes washer waivers  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LG ELECTRONICS LG ELECTRONICS 1776 K Street NW Washington, DC 20006 By email: GC_comments@hq.doe.gov December 7, 2010 Scott Blake Harris, Esq. General Counsel United States Department of Energy 1000 Independence Avenue, SW Washington, DC 20585 Re: Alternative test procedure for large-capacity clothes washer models Dear Mr. Harris, Thank you for seeking the views of interested parties concerning implementation of an alternative test procedure for large-capacity clothes washer models, i.e., those in excess of 3.8 cu ft. You appropriately state that the situation you have described presents a set of "unique circumstances." LG Electronics' suggestions herein are crafted in light of these unique circumstances. As discussed herein, LG Electronics believes that there is a relatively simple and

59

Property:Building/FloorAreaGroceryShops | Open Energy Information  

Open Energy Info (EERE)

for Grocery shops Retrieved from "http:en.openei.orgwindex.php?titleProperty:BuildingFloorAreaGroceryShops&oldid286018" What links here Related changes Special pages...

60

Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Maintenance CalendarOutages is the tool to schedule network maintenance and troubleshooting. I've got network trouble. Help me out trouble@es.net is a quick and easy way to...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

How Will You Shop for Your Next Vehicle? | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

How Will You Shop for Your Next Vehicle? How Will You Shop for Your Next Vehicle? How Will You Shop for Your Next Vehicle? July 28, 2011 - 11:41am Addthis On Monday, Shannon talked about how she's been using the online tools from the Advanced Technology Vehicle Data Center (AFDC) to help her decide what type of highly efficient vehicle may be best for her household. The AFDC provides excellent information such as a Light Duty Vehicle Search, an Alternative Fueling Station Locator, and a Hybrid and Plug-in Electric Vehicles section. All of these are helpful if you're wondering what type of vehicle can fit your needs while using the least possible amount of gasoline. In June, Eric's post Driving Home to a Clean Energy Future shared the latest in gasoline, electric, and hybrid vehicle labels. How about you? Are you starting to research vehicles, and if so, what tools

62

Microsoft Word - 2.6 Shop Managers 0913.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Shop Managers Shop Managers Shop Managers, as described in ES&H Manual Chapter 25, are a special type of Work Lead appointed by AFRD Program Heads to assist in monitoring work in AFRD shops. The Shop Manager must be a person who can, through experience, sufficient knowledge, or training, operate the equipment safely, and identify and mitigate hazards associated with the work performed in the shop. The Shop Manager: * Completes any training required for Shop Managers; * Has demonstrated experience in the safe operation of the equipment in the shop; * Determines whether other personnel are competent and qualified to operate specific pieces of equipment in the shop; * Determines who may use the equipment, and how and when they may do so ES&H Manual Chapter 25, Section 25.7 Work Process A, 2.a.xvi and

63

Remote Shopping Robot System for Fresh Foods Method of handling foods  

E-Print Network (OSTI)

Remote Shopping Robot System for Fresh Foods ­ Method of handling foods ­ Tetsuo TOMIZAWA, Akihisa a mobile manipulator as a teleoperated tool for accessing and manipulating remote objects. A human uses the system to select and buy fresh foods of a super market from a remote location via the Internet. We

Ohya, Akihisa

64

Building Green in Greensburg: Dillons Kwik Shop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Dillons Kwik Shop Dillons Kwik Shop After a tornado destroyed 95% of Greensburg, Kansas, in May 2007, residents needed a convenience store for gas and groceries. Just a year after the storm, Kroger Company broke ground on a prototype for rural grocery stores. Completed in February 2009, the new Dillons Kwik Shop is a hybrid between a convenience store and a gas station. Kroger Company hopes this type of store will serve the grocer needs of several rural county areas. Additionally, this building includes a number of unique green building and energy efficiency features. ENERGY EFFICIENCY FEATURES * Well-insulated roof with an R-value of R-24 that prevents heat loss and maintains cooler temperatures in summer * A high albedo reflective roof coating reflects heat away from the building in

65

General Orientation to the Building 433 LOM Machine Shop  

NLE Websites -- All DOE Office Websites (Extended Search)

grinder in the LOM Machine Shop to grind non-ferrous materials (e.g., aluminum, brass, plastics, or wood). * Contact the Shop Coordinator or an APS Floor Coordinator if you...

66

The Research of Internet Shopping Customer Value Model  

Science Conference Proceedings (OSTI)

The existing empirical study of Internet shopping in literature, mostly concerned about the interaction relationship of retailer and customer, few scholars study the process of transactions between customers and other services suppliers, by assaying ... Keywords: Internet Shopping, Stakeholders, Customer Value

Xiao-bin Liu; Ming-qing Qiu

2010-05-01T23:59:59.000Z

67

LOM_Shop_Monthly_Inspection_Record.xls  

NLE Websites -- All DOE Office Websites (Extended Search)

ˆš Satisfactory ˆš Satisfactory R Requires follow-up U Urgent attention required Outside postings: Eye protection required; Authorized users only; User Shop Access List, Lead postings Inside postings: User Shop Access List; Machine Daily Checklists, Lead postings, Safety Rules Date Deficiencies corrected Outside postings Visitors safety glasses Inside postings Overhead & task lamps OK Work table clean; machines free of debris Clamping mechanisms OK Machines anchored to floor Access to emergency power disconnects Auto machine restart inhibit working OK Egress aisles clear Machine working areas clear General housekeeping No tripping hazards Spill control kit available Waste lead container in place & labeled Oily rag container in place & labeled General Vacuum OK with correct

68

Search Strategies in Shopping Engines: An Experimental Investigation  

Science Conference Proceedings (OSTI)

Shopping engines of different designs were researched in respect to convenience as a mode of access to goods and services offered on the Web. Some shopping engines function autonomously in one stage, quickly maximizing decision accuracy as a function ... Keywords: Consumer Behavior, Data-Envelopment Analysis, Decision Support, On-Line Commerce, Preference Elicitation, Recall, Shopping Engines

Arnold Kamis

2006-10-01T23:59:59.000Z

69

Tips: Shopping for Lighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tips: Shopping for Lighting Tips: Shopping for Lighting Tips: Shopping for Lighting July 29, 2012 - 7:27pm Addthis With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. With an array of lighting options, use the Lighting Facts label to determine the right lightbulb for you. | Photo courtesy of Michelle Vigen, Clean Energy Resource Teams. When shopping for lighting, you can now use the Lighting Facts label and lumens to compare bulbs and purchase a bulb with the amount of brightness you want. The Lighting Facts Label Lighting facts per bulb label. The label is an example showing the brightness at 800 lumens, estimated yearly energy cost at $1.57, based on 3 hours per day and 11 cents per kWh. Cost depends on rates and use. The life is 9 years and is based on 3 hours per day. Light appearance is warm at 2700 K. Energy used is 13 watts, and the bulb is ENERGY STAR rated.

70

MACHINE SHOP SAFETY POLICY THE WYSS INSTITUTE  

E-Print Network (OSTI)

Health 210 Lincoln Street 617-432-1370 617-355-7580 617-632-0710 617-632-3016 617-353-6630 617 Research Building (NRB) Security: For lockouts and escorts 617-432-6119 Harvard Custodial Services 617 in the Wyss Institute for Biologically Inspired Engineering (Wyss Institute) light machine shops in the Center

Church, George M.

71

Gas Turbine Component Repair Shop Capabilities  

Science Conference Proceedings (OSTI)

Aftermarket repair services for gas turbine OM has been undergoing continual transformation beginning with the emergence of independent shops in the 1980s. The original equipment manufacturers (OEMs) in the late 1990s began to aggressively pursue repair services. Gas turbine hot section component repair/replacement coupled with inspection/overhaul technical support has come to be offered as long-term service agreements (LTSAs). These agreements often extend from 6 to 18 years. The repair business continu...

2011-12-16T23:59:59.000Z

72

Safety_Tips_for_Christmas_Shopping-DEC-2011  

NLE Websites -- All DOE Office Websites (Extended Search)

for Christmas Shopping for Christmas Shopping The holiday shopping season can be a time of great joy safety risks. Below are some safety tips to keep in mind while shopping. * Carry a cell phone and program emergency and * If you plan on carrying a purse or handbag, carry it as clo body as possible. * Try to shop during the daytime hours and bring a friend or family member Safety in numbers! * Carry minimal amounts of cash. * Have credit card numbers and customer service numbers case. * If your card(s) are lost or stolen, call the credit card loss. * Do not overload yourself with packages. * If you must leave purchases * When walking to the parkin * When unloading the content purse unattended in the shopping cart. * Be cautious of anyone who approaches you in a parking lot or in a store. It could be a

73

Flow shop scheduling with peak power consumption constraints  

E-Print Network (OSTI)

Mar 29, 2012 ... In particular, we consider a flow shop scheduling problem with a restriction on peak power consumption, in addition to the traditional ...

74

Mining Skewed and Sparse Transaction Data for Personalized Shopping Recommendation  

Science Conference Proceedings (OSTI)

A good shopping recommender system can boost sales in a retailer store. To provide accurate recommendation, the recommender needs to accurately predict a customer's preference, an ability difficult to acquire. Conventional data mining techniques, such ... Keywords: collaborative filtering, graphical models, shopping recommendation, transaction data, user profiles

Chun-Nan Hsu; Hao-Hsiang Chung; Han-Shen Huang

2004-10-01T23:59:59.000Z

75

A study of interactive qualitative at online shopping behavior  

Science Conference Proceedings (OSTI)

As the information age arrives and the internet network has very popular day by day. Internet network has already become quite important activity in people's daily life. The research shows that there are more than 650 million non-repeating users shop ... Keywords: interactive qualitative analysis (IQA), interactive qualitative research, on-line shopping, transaction cost

Chien-Yuan Lai; Dong-Her Shih; Hsiu-Sen Chiang; Ching-Chiang Chen

2010-02-01T23:59:59.000Z

76

Post-Holiday Holiday Shopping | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Post-Holiday Holiday Shopping Post-Holiday Holiday Shopping Post-Holiday Holiday Shopping January 10, 2012 - 4:31pm Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory Ah, January. It's still cold and it's still dark all the time, but now all the cheerful Christmas lights have come down so there's nothing to break up the monotony. What's there to do? Well, while it's a little late now, you might want to go do some post-holiday holiday shopping. Yes, I know. That sounds insane. Everyone is thoroughly sick of holiday shopping. You've spent enough money already. I know. But I was out wandering through the stores during the first week of January when I happened to pass by heavily discounted holiday products. And in that great wasteland of 50% off products and half-empty shelves, I found a vast

77

Green your Back to School Shopping List! | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Green your Back to School Shopping List! Green your Back to School Shopping List! Green your Back to School Shopping List! August 23, 2013 - 10:06am Addthis Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Save energy and money while buying school supplies this year. | Photo courtesy of ©iStockphoto/Ls9907 Agatha Wein Communications Specialist, State Energy Program How can I participate? You can save energy and money this fall by simply reducing, reusing, and recycling school supplies. It seems back-to-school shopping lists get longer every year! This year, you can reduce the impact your back-to-school shopping has on energy and the environment by making a few simple choices. Just use the mantra: reuse, reduce, recycle! Reuse Reusing items is the best way to minimize the environmental and energy

78

Building Energy Software Tools Directory: EnergySavvy  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Related Links EnergySavvy EnergySavvy logo One stop shop for homeowners wishing to increase their home's efficiency. Homeowners can use an online energy...

79

MAINTENANCE SHOP The shop manager, Clint Steffan has over 25 years experience in Electronic design, test, and repair in  

E-Print Network (OSTI)

MAINTENANCE SHOP The shop manager, Clint Steffan has over 25 years experience in Electronic design the capability of repairing most electronic, mechanical and electro-mechanical equipment, including refrigeration source for parts instead of buying from equipment manufacturer. Repair/recharge small refrigeration

Lajeunesse, Marc J.

80

CRAD, Machine Shop Safe Operations Assessment Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Machine Shop Safe Operations Assessment Plan Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm. (DOE O 440.1A Contractor Requirements Document (CRD)) Employees shall be encouraged to become involved in the identification and control of hazards in the workplace. (DOE O 440.1A CRD) Workers shall have the right, without reprisal, to accompany DOE worker protection personnel during workplace inspections. (DOE O44.1A

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Weatherization Assistance Available at Florida Pie Shop | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Weatherization Assistance Available at Florida Pie Shop Weatherization Assistance Available at Florida Pie Shop Weatherization Assistance Available at Florida Pie Shop June 29, 2010 - 10:00am Addthis Malea Guiriba uses a portion of profits from her pie business to fund weatherization projects for local residents. | Photo courtesy of Malea Guiriba Malea Guiriba uses a portion of profits from her pie business to fund weatherization projects for local residents. | Photo courtesy of Malea Guiriba Pie in the Sky, a seemingly simple store that offers customers fresh-baked desserts, is providing a second treat: weatherization. Local resident Malea Guiriba opened the pie shop in the small town of Hastings, Fla., last summer and started using part of the store's profits to help weatherize homes of low-income residents in the area. She did all

82

HEART SMART NUTRITION Heart Smart Shopping & Label Reading  

E-Print Network (OSTI)

Lesson 3 HEART SMART NUTRITION Heart Smart Shopping & Label Reading What's the first step in fat. Your goal is to eat a diet lower in saturated fat, trans fat, and cholesterol. The National Heart

83

Analyzing the Performance of Scientific Applications with OpenSpeedShop  

Science Conference Proceedings (OSTI)

Open|SpeedShop (O|SS) is a comprehensive, open source, parallel performance analysis tool set that provides the most common performance analysis steps in a single environment. It can help application programmers to analyze, understand and optimize the performance of their codes. O|SS provides a wide range of performance experiments covering both sampling and tracing techniques. It works on sequential, MPI, and multithreaded codes without requiring source code modifications. The latter allows users an easy integration of O|SS into their application's workflow and runtime environment. This ensures a low learning curve and is essential for achieving a wide spread adoption of any performance tool set. O|SS, together with documentation and extensive tutorials, is available at http://www.openspeedshop.org/.

Schulz, M; Galarowicz, J; Maghrak, D; Hachfeld, W; Montoya, D; Cranford, S

2009-10-14T23:59:59.000Z

84

Property:Building/FloorAreaShops | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:Building/FloorAreaShops Jump to: navigation, search This is a property of type Number. Floor area for Shops Pages using the property "Building/FloorAreaShops" Showing 19 pages using this property. S Sweden Building 05K0002 + 900 + Sweden Building 05K0009 + 800 + Sweden Building 05K0012 + 1,587 + Sweden Building 05K0013 + 154 + Sweden Building 05K0017 + 3,150 + Sweden Building 05K0018 + 245 + Sweden Building 05K0019 + 5,600 + Sweden Building 05K0035 + 292 + Sweden Building 05K0046 + 530 + Sweden Building 05K0062 + 940 + Sweden Building 05K0081 + 530 + Sweden Building 05K0086 + 920 + Sweden Building 05K0088 + 1,170 + Sweden Building 05K0089 + 976 + Sweden Building 05K0092 + 360 +

85

New Lighting Facts Label: Takes the Guess Work Out of Shopping...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25, 2012 - 5:52am...

86

Remote Shopping Robot System for Fresh Foods Development of the foods grasping mechanism  

E-Print Network (OSTI)

of this mechanism, and shows performance. Key Words: Remote shopping, Mobile Manipulator, Foods handling 1. 1·1 1) 1Remote Shopping Robot System for Fresh Foods ­Development of the foods grasping mechanism­ Tetsuo) Abstract-- Our purpose is developing the remote shopping system as a concrete application. A human uses

Ohya, Akihisa

87

IMPACTing SHOP: Putting an AI Planner Into a Multi-Agent Environment  

Science Conference Proceedings (OSTI)

In this paper we describe a formalism for integrating the SHOP HTN planning system with the IMPACT multi-agent environment. We define the A-SHOP algorithm, an agentized adaptation of the SHOP planning algorithm that takes advantage of IMPACT's capabilities ... Keywords: HTN planning, heterogenous/distributed data, multi-agent systems

Jürgen Dix; Héctor Muñoz-Avila; Dana S. Nau; Lingling Zhang

2003-04-01T23:59:59.000Z

88

Designing a cross-language comparison-shopping agent  

Science Conference Proceedings (OSTI)

This research pertains to the design and development of a shopbot called WebShopper+. This shopbot is intended to help customers find and compare e-tailers that market their wares using different languages. WebShopper+ is built with a multilingual ontology ... Keywords: Comparison-shopping, Formal concept analysis, Ontology, Semantic similarity, Shopbot

Shiu-Li Huang; Yu-Hsiang Tsai

2011-01-01T23:59:59.000Z

89

Resource Constraints for Preemptive Job-shop Scheduling  

Science Conference Proceedings (OSTI)

This paper presents an experimental study of constraint propagation algorithms for preemptive scheduling. We propose generalizations of non-preemptive constraint propagation techniques (based on timetables, on disjunctive constraints, and on edge-finding) ... Keywords: constraint propagation, disjunctive constraints, edge-finding, job-shop scheduling, network flows, preemptive scheduling, resource constraints, timetables

Claude Le Pape; Philippe Baptiste

1998-10-01T23:59:59.000Z

90

NORTH PORTAL-HOT WATER CALCULATION-SHOP BUILDING #5006  

SciTech Connect

The purpose of this design analysis and calculation is to determine the demand for domestic cold water and to size the supply main for the Shop Building No.5006 in accordance with the Uniform Plumbing Code (UPC) (Section 4.4.1) and the U.S. Department of Energy, Order 6430.1A-1540 (Section 4.4.2).

R. Blackstone

2006-01-25T23:59:59.000Z

91

VEE-0084 - In the Matter of Gas'n Shop, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

84 - In the Matter of Gas'n Shop, Inc. 84 - In the Matter of Gas'n Shop, Inc. VEE-0084 - In the Matter of Gas'n Shop, Inc. On March 26, 2002, Gas'n Shop, Inc. (Gas'n Shop) of Lincoln, Nebraska filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). In its application, Gas'n Shop requests that it be excused from filing the Energy Information Administration's (EIA) form entitled "Resellers'/ Retailers' Monthly Petroleum Product Sales Report" (Form EIA-782B). For the reasons detailed below, we deny Gas'n Shop's request for exception relief. vee0084.pdf More Documents & Publications VEE-0082 - In the Matter of Fleischli Oil Company VEE-0081 - In the Matter of North Side Coal & Oil Co., Inc. VEE-0026 - In the Matter of R.W. Hays Co.

92

Survey of Gas Turbine Component Repair Shops - 2008 Update  

Science Conference Proceedings (OSTI)

Aftermarket repair services for gas turbine O&M has been undergoing continual transformation beginning with the emergence of independent shops in the 1980s. The original equipment manufacturers (OEMs) began to aggressively pursue repair services in the late 1990s. Gas turbine hot section component repair/replacement coupled with inspection/overhaul technical support has come to be known broadly as long-term service agreements (LTSAs). These agreements often extend from 6 to 18 years. The repair business ...

2009-03-17T23:59:59.000Z

93

Action Memorandum for Decommissioning of TAN-607 Hot Shop Area  

DOE Green Energy (OSTI)

The Department of Energy is documenting the selection of an alternative for the TAN-607 Hot Shop Area using a Comprehensive Environmental Response, Compensation, and Liability Act non-time-critical removal action (NTCRA). The scope of the removal action is limited to TAN-607 Hot Shop Area. An engineering evaluation/cost analysis (EE/CA) has assisted the Department of Energy Idaho Operations Office in identifuomg the most effective method for performing the decommissioning of this structure whose mission has ended. TAN-607 Hot Shop Area is located at Test Area North Technical Support Facility within the Idaho National Laboratory Site. The selected alternative consists of demolishing the TAN-607 aboveground structures and components, removing belowground noninert components (e.g. wood products), and removing the radiologically contaminated debris that does not meet remedial action objectives (RAOs), as defined in the Record of Decision Amendment for the V-Tanks and Explanation of Significant Differences for the PM-2A Tanks at Test Area North, Operable Unit 1-10.

M. A. Pinzel

2007-05-01T23:59:59.000Z

94

Ubira: a mobile platform for an integrated online/offline shopping experience  

Science Conference Proceedings (OSTI)

Recently, mobile applications focusing on barcode scanning and price comparison are gaining popularity among users. The users of these applications are drawn away from participating in the business model of the brick-and-mortar stores. Ubira is a novel ... Keywords: brick-and-mortar stores, context-aware services, online and offline shopping integration, real world shopping, retailers, service model

Udana Bandara; James Chen

2011-09-01T23:59:59.000Z

95

A heuristic for minimizing the makespan in no-idle permutation flow shops  

Science Conference Proceedings (OSTI)

The paper deals with the problem of finding a job sequence that minimizes the makespan in m-machine flow shops under the no-idle condition. This condition requires that each machine must process jobs without any interruption from the start of processing ... Keywords: Flow shop, Heuristics, Makespan, No-idle machines, Scheduling

Pawel Jan Kalczynski; Jerzy Kamburowski

2005-08-01T23:59:59.000Z

96

A hybrid harmony search algorithm for the blocking permutation flow shop scheduling problem  

Science Conference Proceedings (OSTI)

This paper proposes a hybrid modified global-best harmony search (hmgHS) algorithm for solving the blocking permutation flow shop scheduling problem with the makespan criterion. First of all, the largest position value (LPV) rule is proposed to convert ... Keywords: Blocking flow shop, Harmony search, Metaheuristics, NEH heuristic, Tabu Search

Ling Wang; Quan-Ke Pan; M. Fatih Tasgetiren

2011-08-01T23:59:59.000Z

97

Solving the job-shop scheduling problem optimally by dynamic programming  

Science Conference Proceedings (OSTI)

Scheduling problems received substantial attention during the last decennia. The job-shop problem is a very important scheduling problem, which is NP-hard in the strong sense and with well-known benchmark instances of relatively small size which attest ... Keywords: Complexity analysis, Dynamic programming, Job-shop scheduling

Joaquim A. S. Gromicho; Jelke J. Van Hoorn; Francisco Saldanha-Da-Gama; Gerrit T. Timmer

2012-12-01T23:59:59.000Z

98

Mining customer knowledge to implement online shopping and home delivery for hypermarkets  

Science Conference Proceedings (OSTI)

With advances in modern technology, the Internet population has increased year by year globally. For young customers who consider convenience and speed as prerequisites, online shopping has become a new type of consumption. In addition, business-to-customer ... Keywords: Association rule, Cluster analysis, Data mining, Database marketing, Electronic commerce, Home delivery, On-line shopping

Shu-hsien Liao; Yin-ju Chen; Yi-tsun Lin

2011-04-01T23:59:59.000Z

99

Sams Teach Yourself Paint Shop Pro 6 in 24 Hours, 1st edition  

Science Conference Proceedings (OSTI)

From the Publisher:This easily accessible tutorial uses a friendly, conversational approach to teach you the basics of Paint Shop Pro 6. With its careful, step-by-step approach, Sams Teach Yourself Paint Shop Pro 6 in 24 Hours makes it easy even for ...

T. Michael Clark; Michael Clark / Kris Tufto

1999-11-01T23:59:59.000Z

100

Scheduling trains as a blocking parallel-machine job shop scheduling problem  

Science Conference Proceedings (OSTI)

In this paper, the train scheduling problem is modelled as a blocking parallel-machine job shop scheduling (BPMJSS) problem. In the model, trains, single-track sections and multiple-track sections, respectively, are synonymous with jobs, single machines ... Keywords: Blocking, Job shop scheduling, Parallel machine, Train scheduling

Shi Qiang Liu; Erhan Kozan

2009-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

[Shopping Using the Product/Keyword Search] Updated March 15, 2012  

E-Print Network (OSTI)

Search returns products from the hosted catalogs. Start with by entering an item into the search field/Shop tab at the top to start your search 1. Shop at the Top To start searching for an item, enter the item in the search field ­ include specific search terms, such as "latex-free gloves" instead of just "gloves". New

Choate, Paul M.

102

Machine Shop Safe Operations Assessment Plan, 7/03 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Machine Shop Safe Operations Assessment Plan, 7/03 Machine Shop Safe Operations Assessment Plan, 7/03 Machine Shop Safe Operations Assessment Plan, 7/03 The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm. (DOE O 440.1A Contractor Requirements Document (CRD)) Machine-Shop.doc More Documents & Publications MAINTENANCE Assessment Plan, NNSA/Nevada Site Office Facility Representative Division Order Module--DOE O 440.1B, WORKER PROTECTION PROGRAM FOR DOE (INCLUDING NNSA) FEDERAL EMPLOYEES DOE-STD-6005-01

103

Science shops: A kaleidoscope of science-society collaborations in Europe  

E-Print Network (OSTI)

The science-shop model was initiated in the Netherlands in the 1970s. During the 1980s, the model spread throughout Europe, but without much coordination. The crucial idea behind the science shops involves a working relationship between knowledge-producing institutions like universities and citizen groups that need answers to relevant questions. More recently, the European Commission has funded a number of projects for taking stock of the results of science shops. Twenty-one in-depth case studies by seven science shops across Europe enable us to draw some conclusions about the variety of experiences in terms of differences among disciplines, nations, and formats of the historical institutionalization. The functions of science shops in the mediation of normative concerns with analytical perspectives can further be specified.

Leydesdorff, Loet

2009-01-01T23:59:59.000Z

104

Energy Savers: The One-Stop Shop for Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Savers: The One-Stop Savers: The One-Stop Shop for Energy Efficiency Building America Stakeholder Meeting Austin, TX Jayne Choi, Energy Analyst, CNT Energy March 1, 2012 CNT Center for Neighborhood Technology 33 year-old not-for-profit: 100 employees 2009 MacArthur Award Recipient Four issue areas: - Water - Transportation & community development - Climate - Energy Two affiliates: - CNT Energy - I-GO Car Sharing CNT Energy A division of the Center for Neighborhood Technology dedicated to helping communities and consumers save energy and money with: Dynamic Pricing and Smart Grid - Ameren Power Smart Pricing - ComEd Residential Real-Time Pricing Energy Efficient Buildings - Residential - Commercial and municipal buildings Regional Energy Planning - Sustainability plans for municipalities

105

Machine Shop Safe Operations Assessment Plan - Developed By NNSA/Nevada Site Office Facility Representative Division  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July 2003 - Machine Shop Safe Operations July 2003 - Machine Shop Safe Operations Utilize 29 CFR 1910 Utilize applicable LLNL, LANL, DTRA, BN procedures VALUE ADDED FOR: AMTS Contractor Assurance Focus Area AMTS ISM Improvements Focus Area AMTS Safety Precursors/Hazards Analysis Focus Area AMTS Environment, Safety, & Health Division MACHINE SHOP SAFE OPERATIONS Assessment Plan NNSA/Nevada Site Office Independent Oversight Division Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause

106

Biomass Company Sets Up Shop in High School Lab | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Company Sets Up Shop in High School Lab Biomass Company Sets Up Shop in High School Lab Biomass Company Sets Up Shop in High School Lab March 30, 2010 - 2:45pm Addthis Stephen Graff Former Writer & editor for Energy Empowers, EERE Unlike most biotechnology students who have to go to a research facility to see scientists in action, those at Greeneville High just need to turn their heads. For the last four years, Larry Cosenza, of C2 Biotechnologies, a one-man shop in Germantown, N.Y, has been working in his basement to construct fusion enzymes, a new technology that converts biomass into energy more easily. But in January, he took over Greeneville High School's agriculture room, a move that will not only expand his workspace and put him steps closer to commercialization but also encourage project-based

107

Solving job-shop scheduling problems by a novel artificial immune system  

Science Conference Proceedings (OSTI)

The optimization of job-shop scheduling is very important because of its theoretical and practical significance. This paper proposes an efficient scheduling method based on artificial immune systems. In the proposed method, the initial population is ...

Hong-Wei Ge; Liang Sun; Yan-Chun Liang

2005-12-01T23:59:59.000Z

108

A multi-objective genetic algorithm for fuzzy flexible job-shop scheduling problem  

Science Conference Proceedings (OSTI)

In many real-world applications, processing times may vary dynamically due to human factors or operating faults and there are some other uncertain factors in the scheduling problems. Flexible job-shop scheduling problem (FJSP) is an extended traditional ...

Xiaojuan Wang; Liang Gao; Chaoyong Zhang; Xinyu Li

2012-12-01T23:59:59.000Z

109

Building Energy Software Tools Directory : Weather Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Weather Tool Back to Tool Screenshot for Weather Tool. Screenshot for Weather Tool. Screenshot for Weather...

110

Review: Virtual machine tools and virtual machining-A technological review  

Science Conference Proceedings (OSTI)

Virtual manufacturing systems provide a useful means for products to be manufactured 'right the first time' without the need of physical testing on the shop floor. Earlier research was mostly on developing a virtual manufacturing environment. Over the ... Keywords: Machining simulation, Virtual machine tool, Virtual machining, Virtual system

Aini Abdul Kadir; Xun Xu; Enrico Hämmerle

2011-06-01T23:59:59.000Z

111

Building Energy Software Tools Directory: AVReporter  

NLE Websites -- All DOE Office Websites (Extended Search)

AVReporter AVReporter tool_avreporter.jpg Energy management systems can measure data via installed hardware and turn it into valuable information. The AVReporter Energy Management software then will turn this information into reports and analytical information aiding energy efficiency, helping to realize where and when to change user platform in order to reduce consumption. Screen Shots Keywords Energy management, energy monitoring, reducing CO2, increase energy efficency, ISO50001 Validation/Testing Compatible with ISO50001 Standards and LEED Certifications. Expertise Required For users: none. For system integrators: electrical engineer and IT specialist. Users Users over 100 in Hungary and international Audience Production companies, building complexes, logistic centers and shopping

112

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis  

SciTech Connect

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

1990-12-01T23:59:59.000Z

113

Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis  

SciTech Connect

The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

Not Available

1990-12-01T23:59:59.000Z

114

Prioritization Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Building Technologies Office Prioritization Tool 2 | Building Technologies Office eere.energy.gov Vision: develop an analytical tool that considers building efficiency...

115

New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting Facts Label: Takes the Guess Work Out of Shopping for Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs New Lighting Facts Label: Takes the Guess Work Out of Shopping for Light Bulbs January 25, 2012 - 5:52am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory If you're like me, it sometimes feels overwhelming standing at the store and staring at a big wall of light bulbs, trying to understand all the lighting choices. With new lighting standards taking effect this year, now's a great time switch to energy-saving incandescent, CFL, and LED light bulbs, which are available in most hardware and home improvement retailers. They all are more energy-efficient than traditional incandescent bulbs, and upgrading 15 of the inefficient incandescent light bulbs in your home could

116

Pricing and promotion strategies of an online shop based on customer segmentation and multiple objective decision making  

Science Conference Proceedings (OSTI)

The advent of the Internet and web technologies has enabled the prosperity of virtual stores, which greatly reduce customers' search costs and retailers' overhead. However, the furious competition between online shops makes it difficult for them to generate ... Keywords: Bargaining, Customer relationship management, Multiple objective decision making, Online shop, Pricing, Promotion

C.-C. Henry Chan; Chi-Bin Cheng; Wen-Chen Hsien

2011-11-01T23:59:59.000Z

117

Analysis & Tools: Tools and Tool Interaction AAU  

E-Print Network (OSTI)

During the three years of AMETIST the performance and usability of the existing tools for analysing timed automata models have improved enormously. In addition to traditional verification of timed models, emphasis has been put into retargeting the technology towards optimal scheduling and performance analysis and have been pursued in a number of new tools developed

unknown authors

2005-01-01T23:59:59.000Z

118

A hybrid heuristic to solve the parallel machines job-shop scheduling problem  

Science Conference Proceedings (OSTI)

This paper presents an advanced software system for solving the flexible manufacturing systems (FMS) scheduling in a job-shop environment with routing flexibility, where the assignment of operations to identical parallel machines has to be managed, in ... Keywords: Ant colony optimization, Genetic algorithms, Hybrid systems, Parallel machines, Statistical analysis

Andrea Rossi; Elena Boschi

2009-02-01T23:59:59.000Z

119

Dynamic production scheduling of job-shop operations on the IBM 704 data-processing equipment  

Science Conference Proceedings (OSTI)

First, let us explain what we mean by job-shop operations. In this case we are talking about our Jet Engine Department in the General Electric Company, Aircraft Gas Turbine Division. The Jet Engine Department is the step between the basic concept development ...

L. N. Caplan; V. L. Schatz

1959-03-01T23:59:59.000Z

120

The Influence of Information Control upon On-line Shopping Behavior  

Science Conference Proceedings (OSTI)

Previous studies have explored privacy instruments and disclosures as factors that affect on-line shopping intentions or attitudes. However, few have evaluated how information control affects this behavior. This paper draws on psychological and social ... Keywords: Cognitive Absorption, Information Control, Intrinsic Motivation, On-Line Behavior, Procedural Practice Justice

Milam Aiken; Jianfeng Wang; Linwu Gu; Kustim Wibowo

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Predictors of police investigation performance: An empirical study of Norwegian police as value shop  

Science Conference Proceedings (OSTI)

Problem-solving organizations such as hospitals, law firms, engineering enterprises, consulting firms, and law enforcement agencies share the same value configuration of a value shop. Rather than inbound and outbound logistics found in value chains, ... Keywords: Information systems, Knowledge management, Knowledge management technology stages, Knowledge sharing, Leadership roles, Occupational culture, Organizational culture, Survey research

Petter Gottschalk

2007-02-01T23:59:59.000Z

122

Improving Multi-agent Evolutionary Techniques with Local Search for Job Shop Scheduling Problem  

Science Conference Proceedings (OSTI)

Scheduling is the allocation of shared resources over time in order to perform a number of tasks. Job Shop Scheduling Problem (JSSP) is the most commonly encountered scheduling problem. A wide range of approaches have been proposed to solve it. In this ... Keywords: Genetic Algorithm, Particle Swarm Optimization, Multi-Agent System, Job Schop Scheduling

Ahmad Balid; Sonajharia Minz

2008-12-01T23:59:59.000Z

123

Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools LBNL's WINDOW and THERM software tools are key to evaluating new design concepts RESFEN -- Version 5.0 now available A PC program for calculating the heating and...

124

Tool Catalog  

Science Conference Proceedings (OSTI)

... Microscopy tool. File Utilities, Control file load order, JPEG compression, etc. Fourier, ... Fractal - Koch, Generate Koch curves.. Fractal ...

125

Simulation tools  

E-Print Network (OSTI)

In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

Jenni, F

2006-01-01T23:59:59.000Z

126

Exposure Evaluation for Benzene, Lead and Noise in Vehicle and Equipment Repair Shops  

SciTech Connect

An exposure assessment was performed at the equipment and vehicle maintenance repair shops operating at the U. S. Department of Energy Hanford site, in Richland, Washington. The maintenance shops repair and maintain vehicles and equipment used in support of the Hanford cleanup mission. There are three general mechanic shops and one auto body repair shop. The mechanics work on heavy equipment used in construction, cranes, commercial motor vehicles, passenger-type vehicles in addition to air compressors, generators, and farm equipment. Services include part fabrication, installation of equipment, repair and maintenance work in the engine compartment, and tire and brake services. Work performed at the auto body shop includes painting and surface preparation which involves applying body filler and sanding. 8-hour time-weighted-average samples were collected for benzene and noise exposure and task-based samples were collected for lead dust work activities involving painted metal surfaces. Benzene samples were obtained using 3M™ 3520 sampling badges and were analyzed for additional volatile organic compounds. These compounds were selected based on material safety data sheet information for the aerosol products used by the mechanics for each day of sampling. The compounds included acetone, ethyl ether, toluene, xylene, VM&P naphtha, methyl ethyl ketone, and trichloroethylene. Laboratory data for benzene, VM&P naphtha, methyl ethyl ketone and trichloroethylene were all below the reporting detection limit. Airborne concentrations for acetone, ethyl ether, toluene and xylene were all less than 10% of their occupational exposure limit. The task-based samples obtained for lead dusts were submitted for a metal scan analysis to identify other metals that might be present. Laboratory results for lead dusts were all below the reporting detection limit and airborne concentration for the other metals observed in the samples were less than 10% of the occupational exposure limit. Noise dosimetry sampling was performed on a random basis and was representative of the different work activities within the four shops. Twenty three percent of the noise samples exceeded the occupational exposure limit of 85 decibels for an 8-hour time-weightedaverage. Work activities where noise levels were higher included use of impact wrenches and grinding wheels.

Sweeney, Lynn C.

2013-04-10T23:59:59.000Z

127

Reference Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Tools Current Greenhouse Gas Concentrations Name that compound: The numbers game for CFCs, HFCs, HCFCs, and Halons Conversion Tables and More Glossary Acronyms CDIAC's...

128

Percussion Tool  

INL has invented a new technology for use in an electric percussion hammer drill, which includes a reciprocal moveable hammer that drives a tool bit ...

129

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

We provide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

130

Analysis Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Genome Channel Generation GRAIL GRAILEXP Pipeline Domain Parser Prospect MIRA Analysis Tools We are the Computational Biology and Bioinformatics Group of the Biosciences Division...

131

CMVRTC: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

tool that graphically displays weight and inspection stations for each state across a Google map. Visit the Nationwide Weight & Inspection Station site to view your data. google...

132

A new hybrid multi-objective Pareto archive PSO algorithm for a bi-objective job shop scheduling problem  

Science Conference Proceedings (OSTI)

This paper presents a new mathematical model for a bi-objective job shop scheduling problem with sequence-dependent setup times and ready times that minimizes the weighted mean flow time (F@?"w) and total penalties of tardiness and earliness (E/T). Obtaining ... Keywords: Bi-objective job shop, Genetic operators, Pareto archive PSO, Ready time, Sequence-dependent setup times, VNS

R. Tavakkoli-Moghaddam; M. Azarkish; A. Sadeghnejad-Barkousaraie

2011-09-01T23:59:59.000Z

133

Energy Efficiency Can Be at the Top of Your Shopping List | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency Can Be at the Top of Your Shopping List Efficiency Can Be at the Top of Your Shopping List Energy Efficiency Can Be at the Top of Your Shopping List November 30, 2009 - 3:30pm Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy I don't know about you, but about the last thing I want this year for the holidays is another mustard-yellow sweater. Sure, it's nice to have some extra-warm clothes stashed in the top drawer of the dresser this time of year, but I'm clearly maxed-out in the yellow department. Right around this time of year I start putting together my master list of gifts that I could actually use-you know, things my parents would never buy me unless I told them I needed them. Now, honestly, not all of what I want this year has to do with saving energy and money. I can't think of any

134

Energy Efficiency Can Be at the Top of Your Shopping List | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Can Be at the Top of Your Shopping List Energy Efficiency Can Be at the Top of Your Shopping List Energy Efficiency Can Be at the Top of Your Shopping List November 30, 2009 - 3:30pm Addthis Eric Barendsen Energy Technology Program Specialist, Office of Energy Efficiency and Renewable Energy I don't know about you, but about the last thing I want this year for the holidays is another mustard-yellow sweater. Sure, it's nice to have some extra-warm clothes stashed in the top drawer of the dresser this time of year, but I'm clearly maxed-out in the yellow department. Right around this time of year I start putting together my master list of gifts that I could actually use-you know, things my parents would never buy me unless I told them I needed them. Now, honestly, not all of what I want this year has to do with saving energy and money. I can't think of any

135

Environmental Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

The Office of Health, Safety and Security HSS Logo Department of Energy Seal Left Tab SEARCH Right Tab TOOLS Right Tab Left Tab HOME Right Tab Left Tab ABOUT US Right Tab Left Tab...

136

Prioritization Tool  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Peer Review Alexis Abramson Chief Scientist alexis.abramson@ee.doe.gov April 2, 2013 Building Technologies Office Prioritization Tool 2 | Building Technologies Office eere.energy.gov Vision: develop an analytical tool that considers building efficiency measures and technologies, and assesses and compares their potential value into the future Uses: * Inform programmatic decision-making * Examine "what if" scenarios * Create targets for FOAs

137

Simulation Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Building simulation tool screen capture Building simulation tool screen capture Simulation Tools Researchers develop whole-building energy simulation software programs that allow architects and building engineers to design or retrofit buildings for maximum energy efficiency and occupant comfort. Programs developed by researchers include: the EnergyPlus whole building simulation program, the Modelica Buildings library for rapid prototyping and controls design, the Building Controls Virtual Test Bed for co-simulation and for model-based operation, and the GenOpt generic optimization program. Contacts Philip Haves PHaves@lbl.gov (510) 486-6512 Michael Wetter MWetter@lbl.gov (510) 486-6990 Links Simulation Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings

138

Regulatory Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Tools Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations. Part I Title 40 CFR Part 194 Criteria for the Certification and Recertification of the Waste Isolation Pilot Plant's Compliance With the Disposal Regulations; Alternative Provisions; Proposed Rule. Friday August 9, 2002. Part II Title 40 CFR Part 194 Criteria for the Certification and Recertification of the Waste Isolation Pilot Plant's Compliance With the Disposal Regulations: Certification Decision; Final Rule. May 18, 1998. Part III

139

Building Energy Software Tools Directory: CPF Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Links CPF Tools CPF Tools logo CPF Tools is the market-leading software for solar installers connecting sales, system design and financing. Screen Shots Keywords...

140

Selective batch crushing in the coal-preparation shop at OAO NTMK  

Science Conference Proceedings (OSTI)

In September 2004, after reconstruction at OAO Nizhnetagil'skii Metallurgicheskii Kombinat (NTMK), blast furnace 6 went into operation for the production of vanadium from hot metal. At the startup of furnace 6, besides optimising its composition; it was decided to restore selective crushing of the coal batch using pneumatic and mechanical separation in the third unit of the coal preparation shop. Additional increase in the mechanical strength of coke by 1.5-2.0% was predicted with a 0.5-1.0% decrease in wear.

N.A. Berkutov; Yu.V. Stepanov; P.V. Shtark; L.A. Makhortova; N.K. Popova; D.A. Koshkarov; N.V. Tsarev [OAO Nizhnetagil'skii Metallurgicheskii Kombinat (NTMK)(Russian Federation)

2007-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

DOE - Office of Legacy Management -- Transcontinental Machine and Tool Co -  

NLE Websites -- All DOE Office Websites (Extended Search)

Transcontinental Machine and Tool Transcontinental Machine and Tool Co - US 06 FUSRAP Considered Sites Site: TRANSCONTINENTAL MACHINE AND TOOL CO. (US.06 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: None Location: Unknown US.06-1 Evaluation Year: 1990 US.06-1 Site Operations: Metal Fabrication operations - Machined Uranium slugs in support of Savannah River program for evaluation of Uranium fabrication methods. US.06-1 Site Disposition: Eliminated - Based on similar AEC/MED machine shops' surveys with low potential for contamination - did not exceed DOE guidelines US.06-1 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Uranium US.06-1 Radiological Survey(s): None Indicated Site Status: Eliminated from further consideration under FUSRAP

142

Building Energy Software Tools Directory : Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Country Related Links Solar Tool Back to Tool Screenshot for Solar Tool. Screenshot for Solar Tool. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content...

143

Blacksmith Shops  

NLE Websites -- All DOE Office Websites (Extended Search)

of Cain, and Zillah had a son, Tubal-cain, "an instructor of every artificer in brass and iron". He is the hero of an epic poem written during the 19th century by a Scot,...

144

Window shopping  

SciTech Connect

The author addresses the energy efficiency of windows and describes changes and new products available in this consumer information article. Experiments currently being done by Lawrence Berkeley Laboratory (LBL), Bonneville Power Authority and the Washington State Energy Office show that some of these superwindows collect more energy from the sun than they let escape from inside the home. One type of window in current production is the low-E (low-emissivity) and the IGUs (insulated glass units). Low-E techniques include glazing of the glass with various materials including polyester and metallic coatings. Other measures include filling the airspace in double pane windows with argon, aerogel or by creating a vacuum in the airspace. Another factor the author considers is ultraviolet light protection.

Best, D.

1990-03-01T23:59:59.000Z

145

Tool Steels  

Science Conference Proceedings (OSTI)

Table 6   Examples of ion implantation in metalforming and cutting applications...tool steel Machining 4140 N 80 3� life Taps HSS Tapping 4140 N 80 3� life HSS Tapping 4130 N 80 5� life HSS Tapping 4140 N 50 10� life M35 Tapping � N 2 200 4� life M7 Tapping � N 100 2� life Cutting blade M2 Cutting 1050 N 100 2� life M2 Cutting SAE 950 N 100 4� life Dies D2 Forming 321 SS N 80...

146

CRM strategies for a small-sized online shopping mall based on association rules and sequential patterns  

Science Conference Proceedings (OSTI)

As dot-com bubble burst in 2002, an uncountable number of small-sized online shopping malls have emerged every day due to many good characteristics of online marketplace, including significantly reduced search costs and menu cost for products or services ... Keywords: Association rule, CRM strategy, Data mining, RFM, Sequential pattern

Beomsoo Shim; Keunho Choi; Yongmoo Suh

2012-07-01T23:59:59.000Z

147

TAU Portable Performance Profiling Tools Sameer Shende  

NLE Websites -- All DOE Office Websites (Extended Search)

Trace: Records the location of floating point exceptions (e.g., Speed- shop SGI) * Event based sampling : (hardware performance counters, VTune) Tuning and Analysis...

148

Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools WINDOW for analyzing window thermal and optical performance THERM for analyzing two-dimensional heat transfer through building products Optics for analyzing optical properties of glazing systems International Glazing Database Optical data for glazing products used by WINDOW 5.2 and Optics5.1 including NFRC approved products Complex Glazing Database A database of shading materials and systems, such as roller shades and venetian blinds, that can be used by WINDOW 6 to calculate thermal and optical characteristics of window products with these shading systems. COMFEN A PC Program for calculating the heating and cooling energy use, and visual and thermal comfort, of commercial building facades. RESFEN A PC program for calculating the heating and cooling energy use of windows in residential buildings

149

Indispensable tool  

SciTech Connect

Synchrotron radiation has become an indispensable research tool for a growing number of scientists in a seemingly ever expanding number of disciplines. We can thank the European Synchrotron Research Facility (ESRF) in Grenoble for taking an innovative step toward achieving the educational goal of explaining the nature and benefits of synchrotron radiation to audiences ranging from the general public (including students) to government officials to scientists who may be unfamiliar with x-ray techniques and synchrotron radiation. ESRF is the driving force behind a new CD-ROM playable on both PCs and Macs titled Synchrotron light to explore matter. Published by Springer-Verlag, the CD contains both English and French versions of a comprehensive overview of the subject.

Robinson, Arthur

2001-08-10T23:59:59.000Z

150

Instrumentation Tools  

E-Print Network (OSTI)

Execution) is a tracing system developed by Larus and Ball which is incorporated as part of the Gnu C compiler [3]. Its goal is to generate very small traces which can be saved and then reused for multiple simulation runs. The modified compiler actually produces two executable programs. The first is the modified application. In addition to normal compilation, the compiler uses the notion of abstract execution to insert tracing code in the application code. Abstract execution is based upon control-flow tracing to reduce the amount of trace code necessary. The resulting trace produced by the modified application is only a tiny part of the full trace. This allows traces representing long execution runs to be saved on disk. The compiler also produces an application specific trace regeneration program. The regeneration program is a post-processing tool which accepts the compacted trace and outputs the full execution trace. The tracing overhead, including the cost of saving the compacted tra...

Jim Pierce; Michael D. Smith; Trevor Mudge

1995-01-01T23:59:59.000Z

151

Engineering Evaluation/Cost Analysis (EE/CA) for Decommissioning of TAN-607 Hot Shop Area  

SciTech Connect

Test Area North (TAN) -607, the Technical Support Facility, is located at the north end of the Idaho National Laboratory (INL) Site. U.S. Department of Energy Idaho Operations Office (DOE-ID) is proposing to decommission the northern section of the TAN-607 facility, hereinafter referred to as TAN-607 Hot Shop Area, under a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) non-time-critical removal action (NTCRA). Despite significant efforts by the United States (U.S.) Department of Energy (DOE) to secure new business, no future mission has been identified for the TAN-607 Hot Shop Area. Its disposition has been agreed to by the Idaho State Historical Preservation Office documented in the Memorandum of Agreement signed October 2005 and it is therefore considered a surplus facility. A key element in DOE's strategy for surplus facilities is decommissioning to the maximum extent possible to ensure risk and building footprint reduction and thereby eliminating operations and maintenance cost. In addition, the DOE's 2006 Strategic Plan is ''complete cleanup of the contaminated nuclear weapons manufacturing and testing sites across the United States. DOE is responsible for the risk reduction and cleanup of the environmental legacy of the Nation's nuclear weapons program, one of the largest, most diverse, and technically complex environmental programs in the world. The Department will successfully achieve this strategic goal by ensuring the safety of the DOE employees and U.S. citizens, acquiring the best resources to complete the complex tasks, and managing projects throughout the United States in the most efficient and effective manner.'' TAN-607 is designated as a historical Signature Property by DOE Headquarters Advisory Council on Historic Preservation and, as such, public participation is required to determine the final disposition of the facility. The decommissioning action will place the TAN-607 Hot Shop Area in a final configuration that will be protective of human health and the environment. Decommissioning the TAN-607 Hot Shop Area is consistent with the joint DOE and U.S. Environmental Protection Agency (EPA) Policy on Decommissioning of Department of Energy Facilities Under the Comprehensive Environmental Response, Compensation and Liability Act, which establishes the CERCLA NTCRA process as the preferred approach for decommissioning surplus DOE facilities. Under this policy, a NTCRA may be taken when DOE determines that the action will prevent, minimize, stabilize, or eliminate a risk to human health and/or the environment. When DOE determines that a CERCLA NTCRA is necessary, DOE is authorized to evaluate, select, and implement the removal action that DOE determines is most appropriate to address the potential risk posed by the release or threat of release. This action is taken in accordance with applicable authorities and in conjunction with EPA and the State of Idaho pursuant to Section 5.3 of the Federal Facility Agreement and Consent Order. In keeping with the joint policy, this engineering evaluation/cost analysis (EE/CA) was developed in accordance with CERCLA as amended by the ''Superfund Amendments and Reauthorization Act of 1986'' and in accordance with the ''National Oil and Hazardous Substances Pollution Contingency Plan.'' This EE/CA is consistent with the remedial action objectives (RAOs) of the Final Record of Decision, Test Area North, Operable Unit 1-10 and supports the overall remediation goals established through the Federal Facility Agreement and Consent Order for Waste Area Group 1. Waste Area Group 1 is located at TAN.

J. P. Floerke

2007-02-05T23:59:59.000Z

152

Engineering Evaluation/Cost Analysis (EE/CA) for Decommissioning of TAN-607 Hot Shop Area  

SciTech Connect

Test Area North (TAN) -607, the Technical Support Facility, is located at the north end of the Idaho National Laboratory (INL) Site. U.S. Department of Energy Idaho Operations Office (DOE-ID) is proposing to decommission the northern section of the TAN-607 facility, hereinafter referred to as TAN-607 Hot Shop Area, under a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) non-time-critical removal action (NTCRA). Despite significant efforts by the United States (U.S.) Department of Energy (DOE) to secure new business, no future mission has been identified for the TAN-607 Hot Shop Area. Its disposition has been agreed to by the Idaho State Historical Preservation Office documented in the Memorandum of Agreement signed October 2005 and it is therefore considered a surplus facility. A key element in DOE's strategy for surplus facilities is decommissioning to the maximum extent possible to ensure risk and building footprint reduction and thereby eliminating operations and maintenance cost. In addition, the DOE's 2006 Strategic Plan is ''complete cleanup of the contaminated nuclear weapons manufacturing and testing sites across the United States. DOE is responsible for the risk reduction and cleanup of the environmental legacy of the Nation's nuclear weapons program, one of the largest, most diverse, and technically complex environmental programs in the world. The Department will successfully achieve this strategic goal by ensuring the safety of the DOE employees and U.S. citizens, acquiring the best resources to complete the complex tasks, and managing projects throughout the United States in the most efficient and effective manner.'' TAN-607 is designated as a historical Signature Property by DOE Headquarters Advisory Council on Historic Preservation and, as such, public participation is required to determine the final disposition of the facility. The decommissioning action will place the TAN-607 Hot Shop Area in a final configuration that will be protective of human health and the environment. Decommissioning the TAN-607 Hot Shop Area is consistent with the joint DOE and U.S. Environmental Protection Agency (EPA) Policy on Decommissioning of Department of Energy Facilities Under the Comprehensive Environmental Response, Compensation and Liability Act, which establishes the CERCLA NTCRA process as the preferred approach for decommissioning surplus DOE facilities. Under this policy, a NTCRA may be taken when DOE determines that the action will prevent, minimize, stabilize, or eliminate a risk to human health and/or the environment. When DOE determines that a CERCLA NTCRA is necessary, DOE is authorized to evaluate, select, and implement the removal action that DOE determines is most appropriate to address the potential risk posed by the release or threat of release. This action is taken in accordance with applicable authorities and in conjunction with EPA and the State of Idaho pursuant to Section 5.3 of the Federal Facility Agreement and Consent Order. In keeping with the joint policy, this engineering evaluation/cost analysis (EE/CA) was developed in accordance with CERCLA as amended by the ''Superfund Amendments and Reauthorization Act of 1986'' and in accordance with the ''National Oil and Hazardous Substances Pollution Contingency Plan.'' This EE/CA is consistent with the remedial action objectives (RAOs) of the Final Record of Decision, Test Area North, Operable Unit 1-10 and supports the overall remediation goals established through the Federal Facility Agreement and Consent Order for Waste Area Group 1. Waste Area Group 1 is located at TAN.

J. P. Floerke

2007-02-05T23:59:59.000Z

153

Case history study of total energy system at Western Mall Shopping Center, Sioux Falls, South Dakota  

SciTech Connect

Western Mall Total Energy Plant in Sioux Falls, South Dakota, serves an enclosed mall shopping center of 462,000 ft/sup 2/. The plant provides most of the mall and tenants with electricity, space-heating, and air-conditioning services from a natural gas-fueled engine-generator plant with hot water heat recovery, supplementary gas-fueled boiler, and absorption water chiller. Heating load served by the plant is calculated to be 15,000,000 Btu at -30/sup 0/F winter design condition with 70/sup 0/F space temperature. Maximum observed cooling load at 100/sup 0/F, 75/sup 0/ W.B. outdoor conditions is about 750 tons of refrigeration. Engine heat is recovered in a water system operated at 210 to 240/sup 0/F; an auxiliary scotch marine type, firetype gas-fueled boiler provides up to 14,000,000 Btu/h or supplementary heat. Energy customers have recently begun to exercise considerable control over their uses of electricity with more careful operation of lighting and appliances and with some replacement of illumination devices with more-efficient equipment. It is concluded that central heating and air-conditioning facilities provide the owner with an assured means for serving the shopping center, regardless of which energy source is most economical or least available. The hot and chilled water can be obtained from gas fuel as at present, from fuel oil, propane, all electric, or coal firing. Adapting the conversion equipment is difficult only for coal because of the space requirement for storage and handling that fuel. The power-generating capacity in place is an asset that should be used to serve the tenants because it reduces the public utility company need for expanded capacity. (MCW)

1977-11-01T23:59:59.000Z

154

Building Energy Software Tools Directory: Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

155

Results of the independent radiological verification survey at the former Associate Aircraft Tool and Manufacturing Company site, Fairfield, Ohio (FOH001)  

Science Conference Proceedings (OSTI)

The former Associate Aircraft Tool and Manufacturing Company site is located at 3550 Dixie Highway, Fairfield, Ohio. Associate Aircraft Tool and Manufacturing Company produced hollow uranium slugs in a machine shop at the site in 1956. The work was performed for National Lead of Ohio in a contract with the Atomic Energy Commission to augment the capacity of the Feed Materials Production Center at Fernald in the development of nuclear energy for defense-related projects. The current occupant of the building, Force Control, operates a multipurpose machine shop. At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted an independent radiological verification survey at the former Associate Aircraft Tool and Manufacturing Company Site, Fairfield, Ohio. The survey was performed from February to May of 1995. The purpose of the survey was to verify that radioactivity from residues of {sup 238}U was remediated to a level below acceptable DOE guidelines levels.

Rice, D.E.; Murray, M.E.; Brown, K.S.

1996-01-01T23:59:59.000Z

156

Stone Tool Production  

E-Print Network (OSTI)

by the author. ) Stone Tool Production, Hikade, UEE 2010Short Citation: Hikade 2010, Stone Tool Production. UEE.Thomas, 2010, Stone Tool Production. In Willeke Wendrich (

Hikade, Thomas

2010-01-01T23:59:59.000Z

157

Multimodal Information Group- Tools  

Science Conference Proceedings (OSTI)

... Architecture and Tools for Linguistic Analysis Systems. Miscellaneous Tools. Name, Description. ... JobRunner is a tool designed to run a job (ie to ...

2013-07-12T23:59:59.000Z

158

MSID Products, Tools, & Services  

Science Conference Proceedings (OSTI)

SID Products, Tools, & Services. XML Testbed - collection of XML-Related Tools; Express Engine - STEP (ISO 10303) development ...

2013-09-16T23:59:59.000Z

159

Building Energy Software Tools Directory: Indoor Humidity Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Listed Alphabetically Tools by Platform Tools by Country Related Links Indoor Humidity Tools Indoor Humidity Tools logo. Integrated computer program intended to assist in...

160

Nuclear Maintenance Applications Center: Guide for the Performance of OnSite and Vendor Shop Inspections of Electric Motors  

Science Conference Proceedings (OSTI)

The power industry is experiencing a loss of expertise as its workforce ages. Compounding the problem is that many plants find that there is limited time to train new workers. Periodically, station and corporate motor specialists are asked to perform inspections of on-site motors to maintain a level of equipment reliability or to perform inspections for customers at vendor motor shops. This report should prove valuable during visual inspections of electric motors.

2008-12-19T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

DEVELOPMENT OF REMOTE HANFORD CONNECTOR GASKET REPLACEMENT TOOLING FOR DWPF  

SciTech Connect

The Defense Waste Processing Facility (DWPF) requested the Savannah River National Laboratory (SRNL) to develop tooling and equipment to remotely replace gaskets in mechanical Hanford connectors to reduce personnel radiation exposure as compared to the current hands-on method. It is also expected that radiation levels will continually increase with future waste streams. The equipment is operated in the Remote Equipment Decontamination Cell (REDC), which is equipped with compressed air, two master-slave manipulators (MSM's) and an electro-mechanical manipulator (EMM) arm for operation of the remote tools. The REDC does not provide access to electrical power, so the equipment must be manually or pneumatically operated. The MSM's have a load limit at full extension of ten pounds, which limited the weight of the installation tool. In order to remotely replace Hanford connector gaskets several operations must be performed remotely, these include: removal of the spent gasket and retaining ring (retaining ring is also called snap ring), loading the new snap ring and gasket into the installation tool and installation of the new gasket into the Hanford connector. SRNL developed and tested tools that successfully perform all of the necessary tasks. Removal of snap rings from horizontal and vertical connectors is performed by separate air actuated retaining ring removal tools and is manipulated in the cell by the MSM. In order install a new gasket, the snap ring loader is used to load a new snap ring into a groove in the gasket installation tool. A new gasket is placed on the installation tool and retained by custom springs. An MSM lifts the installation tool and presses the mounted gasket against the connector block. Once the installation tool is in position, the gasket and snap ring are installed onto the connector by pneumatic actuation. All of the tools are located on a custom work table with a pneumatic valve station that directs compressed air to the desired tool and vents the tools as needed. Extensive testing of tooling operation was performed in the DWPF manipulator repair shop. This testing allowed the operators to gain confidence before the equipment was exposed to radioactive contamination. The testing also led to multiple design improvements. On July 17 and 29, 2008 the Remote Gasket Replacement Tooling was successfully demonstrated in the REDC at the DWPF of The Savannah River Site.

Krementz, D.; Coughlin, Jeffrey

2009-05-05T23:59:59.000Z

162

Machine Tool Locator  

NLE Websites -- All DOE Office Websites (Extended Search)

gathered and used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. April 18, 2013 machine tool...

163

The power tool  

Science Conference Proceedings (OSTI)

POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment.

HAYFIELD, J.P.

1999-02-01T23:59:59.000Z

164

Building Energy Software Tools Directory: CPF Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

CPF Tools CPF Tools CPF Tools logo CPF Tools is the market-leading software for solar installers connecting sales, system design and financing. Screen Shots Keywords Solar Sales, Quoting Tool, Proposal Tool, Solar Financing, Leads, Auto-Populate, Rebate Form, CRM software, Customer and Financing Dashboard Validation/Testing None Expertise Required Basic understanding of PV. Training is provided through our help site, which features training videos, a user community through Get Satisfaction, and user guides. We also offer live phone support and regular training webinars. Users More than 2,000 Audience Solar professionals, including installers, sales representatives, operations and system design specialists. We also offer a "Channel Manager" version of CPF Tools for manufacturers and distributors.

165

Available Software Tools  

Science Conference Proceedings (OSTI)

... Climate Suitability Tool Logo, Climate Suitability Tool, A web application for ... Utility Software Icon, 1DZRead, A CONTAM 1D Zone Data file converter, ...

166

A flow-shop problem formulation of biomass handling operations scheduling  

Science Conference Proceedings (OSTI)

Currently, the planning of the biomass collection operations is performed relying on the contractor's experience without the use of any dedicated planning tool. It is expected that more explicitly formulated planning tools would provide benefits on securing ... Keywords: Biomass logistics, Biomass supply chain, Fleet management, Machinery management, Operations management

D. D. Bochtis; P. Dogoulis; P. Busato; C. G. SøRensen; R. Berruto; T. Gemtos

2013-02-01T23:59:59.000Z

167

Washer with electrolytic water dissociation. Final report  

SciTech Connect

The development of a washing machine with turbo-electrolytic pre-wash facility is described. This process involves a preliminary electro-chemical process which is characterized by an overall reduction in energy consumption during the wash cycle. Comparative studies between the turbo-electrolytic washing machine and a standard washing machine have been carried out. Although the production cost of the turbo-electrolytic machine is greater, savings on energy costs will give rise to a net reduction in costs over the lifetime of the machine.

Morello, M.

1984-01-01T23:59:59.000Z

168

Marketing Strategies for Horizontal Axis Washers  

Science Conference Proceedings (OSTI)

Horizontal axis washing machines provide superior washing quality and gentleness as well as reduced energy use. This EPRI guide describes how utilities can effectively engage the horizontal axis washing machine market and the strategic and load-related reasons they should be interested in doing so. The guide covers topics ranging from a detailed overview of the marketplace to specific tactical advice that offers practical insights for any utility considering entering this new market.

1997-04-21T23:59:59.000Z

169

An Effective Optimization-Based Algorithm for Job Shop Scheduling with Fixed-Size Transfer Lots  

E-Print Network (OSTI)

Effective scheduling of production lots is of great importance for manufacturing medium to high-volume products that require significant setup times. Compared to traditional entire-lot production, lot splitting techniques divide a production lot into multiple smaller sublots so that each sublot can be "transferred" from one stage of operation to the next as soon as it has been completed. "Transfer lots," therefore, significantly reduce lead times and lower work-in-process (WIP) inventory. The mathematical modeling, analysis, and control of transfer lots, however, is extremely difficult. This paper presents a novel integer programming formulation with separable structure for scheduling job shops with fixed-size transfer lots. A solution methodology based on a synergistic combination of Lagrangian relaxation, backward dynamic programming (BDP), and heuristics is developed. Through explicit modeling of lot dynamics, transfer lots are handled on standard machines, machines with setups, and machines requiring all transfer lots within a production lot to be processed simultaneously. With "substates" and the derivation of DP functional equations considering transfer lot dynamics, the standard BDP is extended to solve the lot-level subproblems. The recently developed "time step reduction technique" is also used for increased efficiency. It implicitly establishes two time scales to reduce computational requirements without much loss of modeling accuracy and scheduling performance, thus enabling resolution of long-horizon problems within controllable computational requirements. The method has been implemented using object-oriented programming language C++, and numerical tests show that high-quality schedules involving transfer lots are efficiently generated to achieve on-time delivery of products with low WIP inventory.

Bin Jin; Peter B. Luh; L.S. Thakur

1999-01-01T23:59:59.000Z

170

Building Energy Software Tools Directory: Tools by Subjects  

NLE Websites -- All DOE Office Websites (Extended Search)

Envelope Systems HVAC Equipment & Systems Lighting Systems Other Applications Tools Listed Alphabetically Tools by Platform Tools by Country Related Links Tools by Subject...

171

Building Energy Software Tools Directory: Indoor Humidity Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Platform PC Mac UNIX Internet Tools by Country Related Links Indoor Humidity Tools Indoor Humidity Tools logo. Integrated computer program intended to assist in...

172

Building Energy Software Tools Directory: Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip to Content U.S. Department of Energy Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory...

173

Building Energy Software Tools Directory: Weather Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

result is a comprehensive pre-design climatesite analysis tool. Screen Shots Keywords weather data visualization, psychrometry, passive design analysis, optimum orientiation,...

174

Building Energy Software Tools Directory: New Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Auditing & Sales Tool, home energy assessments, energy analysis, home performance, residential retrofits 2013-05-17 MyVerdafero Utility Optimization, building performance,...

175

Word Pro - Untitled1  

U.S. Energy Information Administration (EIA) Indexed Site

1 Commercial Buildings Electricity Consumption by End Use, 2003 1 Commercial Buildings Electricity Consumption by End Use, 2003 By End Use By Principal Building Activity 64 U.S. Energy Information Administration / Annual Energy Review 2011 1,340 481 436 381 167 156 88 69 24 418 Lighting Cooling Ventilation Refrigeration Space Computers Water Office Cooking Other¹ 0 500 1,000 1,500 Trillion Btu Heating Heating Equipment and Storage Assembly 733 719 371 248 244 235 217 208 167 149 267 Mercantile Office Education Health Care Warehouse Lodging Food Service Food Sales Public Service Other² 0 200 400 600 800 Trillion Btu (Cumulative) All Other End Uses Cooling Lighting 1 Examples of "other" include medical, electronic, and testing equipment; conveyors, wrappers, hoists, and compactors; washers, disposals, dryers, and cleaning equipment; escalators, eleva- tors, dumb waiters, and window washers; shop tools and electronic testing equipment; sign

176

An analysis of iterated local search for job-shop scheduling.  

Science Conference Proceedings (OSTI)

Iterated local search, or ILS, is among the most straightforward meta-heuristics for local search. ILS employs both small-step and large-step move operators. Search proceeds via iterative modifications to a single solution, in distinct alternating phases. In the first phase, local neighborhood search (typically greedy descent) is used in conjunction with the small-step operator to transform solutions into local optima. In the second phase, the large-step operator is applied to generate perturbations to the local optima obtained in the first phase. Ideally, when local neighborhood search is applied to the resulting solution, search will terminate at a different local optimum, i.e., the large-step perturbations should be sufficiently large to enable escape from the attractor basins of local optima. ILS has proven capable of delivering excellent performance on numerous N P-Hard optimization problems. [LMS03]. However, despite its implicity, very little is known about why ILS can be so effective, and under what conditions. The goal of this paper is to advance the state-of-the-art in the analysis of meta-heuristics, by providing answers to this research question. They focus on characterizing both the relationship between the structure of the underlying search space and ILS performance, and the dynamic behavior of ILS. The analysis proceeds in the context of the job-shop scheduling problem (JSP) [Tai94]. They begin by demonstrating that the attractor basins of local optima in the JSP are surprisingly weak, and can be escaped with high probaiblity by accepting a short random sequence of less-fit neighbors. this result is used to develop a new ILS algorithms for the JSP, I-JAR, whose performance is competitive with tabu search on difficult benchmark instances. They conclude by developing a very accurate behavioral model of I-JAR, which yields significant insights into the dynamics of search. The analysis is based on a set of 100 random 10 x 10 problem instances, in addition to some widely used benchmark instances. Both I-JAR and the tabu search algorithm they consider are based on the N1 move operator introduced by van Laarhoven et al. [vLAL92]. The N1 operator induces a connected search space, such that it is always possible to move from an arbitrary solution to an optimal solution; this property is integral to the development of a behavioral model of I-JAR. However, much of the analysis generalizes to other move operators, including that of Nowicki and Smutnick [NS96]. Finally the models are based on the distance between two solutions, which they take as the well-known disjunctive graph distance [MBK99].

Whitley, L. Darrell (Colorado State University, Fort Collins, CO); Howe, Adele E. (Colorado State University, Fort Collins, CO); Watson, Jean-Paul (Colorado State University, Fort Collins, CO)

2003-08-01T23:59:59.000Z

177

Case tool evaluation system  

SciTech Connect

An automated system that uses an analytical approach to evaluate Computer-Aided Software Engineering (CASE) tools is currently being developed. this system is referred to as the CASE Tool Evaluation System. The following general criteria will be used: overall tool functionality; tool stability; cost; interfaces with other software; customization; ease of use; output produced; hardware and operating system needs; documentation; training and vendor support; repository interface; methodologies; and vendor stability. in Phase 1 CASE tools will be eliminated that do not meet certain must-have'' characteristics specified by the user. Phase 2 will further reduce the size of the tool list by retaining those tools that possess desirable, but not absolutely necessary'' characteristics, also specified by the user. Phase 3 will employ the Analytic Hierarchy Process, developed by Dr. Thomas L. Saaty, to rank the tools. Users will be able to supply tools of their own choosing, in addition to tools that are generated via normal use of the system. All three phases will interact with a database that stores objective information about CASE tools. The use of the Analytic Hierarchy process (AHP) distinguishes this method of CASE tool evaluation from others. As used in this system, the AHP is a method of breaking down the complex, unstructured problem of selecting a CASE tool into its component evaluation criteria and candidate tools. These criteria and tools are arranged into a hierarchical order. Each criterion and tool is assigned a subjective numerical value (by experts or users or both). These values are then synthesized to determine which have the highest priority. The result will be a ranked list of CASE tools tailored to the needs and desires of the user.

Green, P.L.; Andreae, P.V.; Pennewell, W.J.; Clinard, L.A.; Thomas, B. Jr.; Tarrant, P.M.

1989-01-01T23:59:59.000Z

178

OOTW COST TOOLS  

Science Conference Proceedings (OSTI)

This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

HARTLEY, D.S.III; PACKARD, S.L.

1998-09-01T23:59:59.000Z

179

Adjustable cutting tool holder  

DOE Patents (OSTI)

This patent application describes a device for varying the geometry of a cutting tool for use in machining operations.

Steinhour, William Lee III; West, Drew; Honeycutt, Steve; Frank, Steven; Krishnamurthy, Kallutla

2000-09-21T23:59:59.000Z

180

Caliper and contour tool  

SciTech Connect

The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

Fink, Conrad F. (Los Alamos, NM)

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Computer Forensics Tool Testing  

Science Conference Proceedings (OSTI)

Computer Forensics Tool Testing (CFTT). Summary: For more information, visit: http://www.cftt.nist.gov/. There is a critical ...

2010-10-05T23:59:59.000Z

182

AMO Software Tools  

Energy.gov (U.S. Department of Energy (DOE))

This presentation, hosted by the Advanced Manufacturing Office, provides an overview of tools and resources available for industrial energy management

183

VolumeShop: An Interactive System for Direct Volume Illustration Stefan Bruckner M. Eduard Groller  

E-Print Network (OSTI)

or aberrant anatomy, or to explain the functioning of a tech- nical device, illustration significantly impacts be successfully used to explore and analyze volumetric data sets in medicine, biology, engineering, and many other are an essential tool in communicating complex re- lationships and procedures in science and technology. However

184

Tool setting device  

DOE Patents (OSTI)

The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

Brown, Raymond J. (Clinton, TN)

1977-01-01T23:59:59.000Z

185

Digital clip gift shops as scenarios for collaborative architectures for monetising broadcast archive content: an evaluation from a technical and business viewpoint  

Science Conference Proceedings (OSTI)

Within the scope of this paper we focus on the investigation of potential scenarios for providing clips via common broadcasting platform for sharing these across social media. We develop the idea of a digital clip gift shop and present a technical solution ...

Sabine Bachmayer, Artur Lugmayr, Gabriele Kotsis

2013-05-01T23:59:59.000Z

186

Building Energy Software Tools Directory: Tools by Subjects  

NLE Websites -- All DOE Office Websites (Extended Search)

SolarClimate Analysis Training Utility Evaluation Validation Tools VentilationAirflow Water Conservation Miscellaneous Applications Tools Listed Alphabetically Tools by...

187

Building Energy Software Tools Directory: Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Tool Solar Tool Solar Tool logo. Makes the process of accurately sizing and positioning overhangs, shading devices and louvers easy. This software is a must for architects, planners and building services engineers, anyone who needs to quickly determine the extent of solar penetration into buildings, overshadowing or the most appropriate means of shading a window. The program uses a flexible, parametric model on which can be placed any number of horizontal, vertical and detached shades. You can select any date, time or location, seeing immediately the resulting shadows whilst interactively manipulating the geometry to show immediately the effects. You can also choose to automatically optimise the size and shape of any shading device over any range of dates and times you require. Screen Shots

188

Information Resources: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Tools Below are links to tools that assist users with project planning and analysis. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the report, "Residential Lighting End-Use Consumption Study," which developed a regional estimation framework within a national sample design that allows for the estimation of lamp usage and energy consumption. The tool contains the full set of estimates produced by methodology described in the study. Simple Modular LED Cost Model (LEDCOM) The LED Cost Model provides a simplified method for analyzing the manufacturing costs of an LED package, and enables those involved in the manufacture of LED packages to evaluate the relative impact of changes made at different points in the manufacturing process on the final LED package cost.

189

Renewable Energy Evaluation Tools  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RENEWABLE ENERGY RENEWABLE ENERGY EVALUATION TOOLS Andy Walker, PhD PE Principal Engineer, NREL Renewable Energy Round Table May 2, 2012 2 TECHNICAL ASSESSMENT AND SCREENING TOOLS WE USE IN OUR PROJECTS Campus/Base Assessments INFRASTRUCTURE BUILDINGS ASSESSMENT RENEWABLE SUPPLY SIDE VEHICLES & TOOLS Campus/Base Assessments INFRASTRUCTURE BUILDINGS ASSESSMENT RENEWABLE SUPPLY SIDE VEHICLES & TOOLS 9 9 Renewable Energy Technologies Photovoltaics Daylighting Biomass Heat/Power Concentrating Solar Heat/Power Solar Vent Air Preheat Solar Water Heating Wind Power Ground Source Heat Pump Landfill Gas 10 10 Renewable Energy Resources Geographical Information System (GIS) Datasets * NREL Datasets (http://www.nrel.gov/gis/) - solar radiation 10x10 km grid

190

Strain gauge installation tool  

SciTech Connect

A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

Conard, Lisa Marie (Swissvale, PA)

1998-01-01T23:59:59.000Z

191

Risk Management Tool Attributes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Tools & SMEs - Tools & SMEs Outline for Breakout Session TOOLS 1. Types of Tools a. Risk Management - Database & Reports, risk register, risk forms, risk tracking & monitoring, basis of estimate, action item tracking, historical record of risks & changes, configuration control, enterprise-wide, metrics, risk performance index, risk checklist, graphical display, management reporting (various levels), risk communications b. Risk Analysis i. Cost, ii. budgets, funding, cash-flow analysis, iii. Schedule iv. tailoring categories v. Integrated Cost & Schedule vi. Project phase analysis; organization ownership & joint planning c. Risk Knowledge and Lessons Learned Database i. Enterprise-wide ii. Job/owner-specific iii. Workshops - project specific, risk management,

192

Library Conversion Tool  

Science Conference Proceedings (OSTI)

Library Conversion Tool. ... The LIB2NIST mass spectral data conversion program consists of the following files (which are contained in a ZIP archive): ...

2013-06-24T23:59:59.000Z

193

HPC_Tools.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

debuggers - DDT - Totalview Tools Out of bounds reference in source code for program "flip" ... allocate(putseed(randomsize)) ... badindex randomsize+1...

194

Climate Suitability Tool Description  

Science Conference Proceedings (OSTI)

... The Climate Suitability Tool implements the method outlined in the following publications ... The analysis is based on a single-zone model of natural ...

195

Tools & Resources: Resource Directory  

NLE Websites -- All DOE Office Websites (Extended Search)

that reduce air emissions. Emissions & Generation Resource Integrated Database (eGRID) A tool that provides data on the environmental characteristics of almost all electric...

196

Tools & Resources: Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

NCCC Teams to Execute Your Mission Workforce 04132011 PDF WMV PDF Marketing & Driving Demand: Social Media Tools & Strategies Driving Demand 01062011 PDF WMV PDF Home...

197

Double diameter boring tool  

DOE Patents (OSTI)

A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

Ashbaugh, Fred N. (Belton, MO); Murry, Kenneth R. (Odessa, MO)

1988-12-27T23:59:59.000Z

198

Double diameter boring tool  

DOE Patents (OSTI)

A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

Ashbaugh, F.A.; Murry, K.R.

1986-02-10T23:59:59.000Z

199

Strain gauge installation tool  

DOE Patents (OSTI)

A tool and a method for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

Conard, Lisa Marie

1997-12-01T23:59:59.000Z

200

ORISE: Training and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Training and Tools Chronic diseases such as diabetes, heart disease and cancer afflict more people every year and have resulted in increased demand for trained health care...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

High Performance Tooling Materials  

Science Conference Proceedings (OSTI)

High performance tools are necessary for the successful manufacturing of every consumer product as well as oil drilling and mining operations. Increasing ...

202

Solid-State Lighting: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

about Solid-State Lighting: Tools on Twitter Bookmark Solid-State Lighting: Tools on Google Bookmark Solid-State Lighting: Tools on Delicious Rank Solid-State Lighting: Tools on...

203

Netcat Power Tools  

Science Conference Proceedings (OSTI)

Netcat in one of the most commonly used anti-hacking tools in the world. It reads and writes data across network connections, using the TCP/IP protocol. It is designed to be a reliable "back-end" tool that can be used directly or easily driven by other ... Keywords: Internet, Security

Jan Kanclirz, Jr.

2008-06-01T23:59:59.000Z

204

ARM - Data Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

govDataData Tools govDataData Tools Data Tools Most ARM data is archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) is relatively compact, is appendable, is capable of storing descriptive "meta-data" along with measurement data, and is platform-independent. However, the organization of data within netCDF files tends to follow conventions reflecting either the source or the end use of the data. Consequently, tools developed for use with netCDF files following one convention may not be optimal for use with those following another convention. For example, tools designed for examination of geographically-gridded data may not be well-suited for analysis of time-series data such as that generated by ARM. In addition, some of the

205

OOTW Force Design Tools  

Science Conference Proceedings (OSTI)

This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

Bell, R.E.; Hartley, D.S.III; Packard, S.L.

1999-05-01T23:59:59.000Z

206

Graphitic packing removal tool  

DOE Patents (OSTI)

Graphitic packing removal tools are described for removal of the seal rings in one piece from valves and pumps. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

Meyers, K.E.; Kolsun, G.J.

1996-12-31T23:59:59.000Z

207

Python Tools at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Python Tools Python Tools Python Tools Description and Overview Python is an interpreted, general-purpose high-level programming language. Various of versions of Python are installed on most of the NERSC systems, usually accompanied with computational tool such as numpy and scipy. Using Python on NERSC Systems To use the python installed as module on NERSC systems, you need do module load python To run a python script on the Hopper and Edison compute nodes, you must set an environment variable: setenv CRAY_ROOTFS DSL which is set automatically when the python module is loaded. To execute a script on the Hopper or Edison compute nodes dedicated to your job, you need to use aprun: aprun -n 1 python ./hello_world.py or, if the script is executable and contains '#!/usr/bin/env python' as the

208

Feature - WATER Tool Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Assessment for Transportation Energy Resources (WATER) Tool Released Water Assessment for Transportation Energy Resources (WATER) Tool Released Argonne National Laboratory recently released an open access online tool called WATER (Water Assessment for Transportation Energy Resources), which quantifies water footprint of fuel production stages from feedstock production to conversion process for biofuel with county, state, and regional level spatial resolution. WATER provides analysis on water consumption and its impact on water quality. It contains biofuel pathways for corn grain ethanol, soybean biodiesel, and cellulosic ethanol produced from corn stover and wheat straw. Perennial grass (Switchgrass and Miscanthus) and forest wood residue-based biofuel pathways are currently under development. The WATER tool enables users to conduct pathway comparison, scenario development, and regional specific feedstock analysis in supporting of biofuel industry development and planning. It is available at http://water.es.anl.gov/.

209

Friction stir welding tool  

DOE Patents (OSTI)

A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

Tolle; Charles R. (Idaho Falls, ID), Clark; Denis E. (Idaho Falls, ID), Barnes; Timothy A. (Ammon, ID)

2008-04-15T23:59:59.000Z

210

Smart tool holder  

SciTech Connect

There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

Day, Robert Dean (Los Alamos, NM); Foreman, Larry R. (Los Alamos, NM); Hatch, Douglas J. (Los Alamos, NM); Meadows, Mark S. (Boston, MA)

1998-01-01T23:59:59.000Z

211

Tools for the Mentor  

Energy.gov (U.S. Department of Energy (DOE))

Here you will find a collection of tools and information to help you prepare to become and effective Mentor. Your primary goal is to use your knowledge, skills, and experience in assisting your...

212

Tools for the Mentee  

Energy.gov (U.S. Department of Energy (DOE))

The tools within this document will help to prepare you to become an effective Mentee and provide you with information on how to benefit from your Mentee-Mentor partnership.  The most important...

213

DAAC Data Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

WebGIS WebGIS is an Internet based technology that enables users to browse, query, and display spatial data using a standard web browser. Tool Link Help Point Gridded...

214

Strain gauge installation tool  

DOE Patents (OSTI)

A tool and a method are disclosed for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool. 6 figs.

Conard, L.M.

1998-06-16T23:59:59.000Z

215

Why packages? The Windows tools  

E-Print Network (OSTI)

Why packages? The Windows tools A sample package Going further Package Development in Windows from August 13, 2008; updated November 23, 2012 1 of 45 #12;Why packages? The Windows tools A sample of packages 2 The Windows tools The main tools Missing pieces Installing the tools 3 A sample package Getting

Murdoch, Duncan

216

Building Energy Software Tools Directory: HVAC Residential Load...  

NLE Websites -- All DOE Office Websites (Extended Search)

New Tools DOE Sponsored Tools Submit a Tool Disclaimer Tools by Subject Tools Listed Alphabetically Tools by Platform...

217

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Czech Republic C Tool Applications Free Recently Updated Czech National Calculation Tool EPBD, Energy Performance Certificate, Delivered energy, Energy Demand Calculation...

218

Building Energy Software Tools Directory: Indoor Humidity Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Africa Spain Sweden Switzerland United Kingdom United States Related Links Indoor Humidity Tools Indoor Humidity Tools logo. Integrated computer program intended to assist in...

219

NEAMS ToolKit: advanced computational tools for modeling & simulation...  

NLE Websites -- All DOE Office Websites (Extended Search)

NEAMS ToolKit: advanced computational tools for modeling & simulation of advanced reactor systems Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures &...

220

Enclosed jar tool  

SciTech Connect

A jar tool is described comprising: a mandrel adapted for connection to a piece of drill string at one end of the tool; a housing axially movable relative to the mandrel and adapted for connection to the drill string at the opposite end of the tool; first and second pairs of abutment faces between the mandrel and the housing defining jar and bump positions of the tool, respectively, the first and second pairs of abutment faces located in an abutment chamber; a piston slidably located between walls of the mandrel and the housing and having valve means operable to regulate the passage of hydraulic fluid from a first chamber on one side of the piston between the mandrel and the housing to a second chamber on the other side of the piston between the mandrel and the housing, the valve means including passages for permitting the hydraulic fluid to flow through the piston and between the piston and the walls of the mandrel and housing; and sealing means between the housing and mandrel operable to seal the first pair of abutment faces from outside contamination in the abutment chamber and seal the abutment chamber from the first and second chambers, the first and second pairs of abutment faces being enclosed within the jar tool.

Ring, C.P.

1987-04-21T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

APS Guideline for Hand Tool and Portable Power Tool Usage  

NLE Websites -- All DOE Office Websites (Extended Search)

Hand Tool and Portable Power Tool Usage Hand Tool and Portable Power Tool Usage Introduction CAT/XSD recognizes that the misuse and improper maintenance of hand tools and portable power tools cause a significant number of injuries to even "experienced" workers. Consequently, CAT/XSD has adopted the following policies and procedures to minimize the hazards associated with the use of such equipment at the APS. These guidelines apply to all use of hand tools and portable power tools by CAT/XSD personnel while performing maintenance or installation activities at the APS. Although CAT/XSD feels that most of the guidelines also apply to tool usage during experimental activities, CAT/XSD will not require that short-term users complete the training described below. Using Tools Safely If you have not had formal training in the use of common tools, either view

222

Provide Data and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Provide Data and Tools Print E-mail Provide Data and Tools Print E-mail With the advance of observational capabilities, computational power, and scientific research, there is both an opportunity for scientific progress in the study of the Earth system and a need to manage the data and information generated about it. As computational capabilities improve, data volume will continue to grow at an accelerating rate. It is crucial to continue to collect and store these records, but this increased output will also present data management challenges. Addressing this data-volume challenge will require advanced technology to link users to the various data providers and cloud-based tools to facilitate collaboration. In the coming decade, USGCRP will take a leadership role in coordinating these networks, by providing shared data access, analytic capabilities, and modeling frameworks to support integrated research and decision support.

223

Bumping and jarring tool  

SciTech Connect

A bumping and jarring tool for a well drill string is provided having a telescoping housing and mandrel with an annular hydraulic chamber therebetween divided into two portions. The lower portion is exposed to the ambient hydrostatic well pressure and the upper portion varies in volume as the tool opens and closes. When the tool is opened a jar is produced by a valve between the chamber portions which restricts hydraulic fluid flow between the chamber portions resulting in a pressure drop in the upper portion and by a pressure increasing element in the lower portion which increases the pressure therein while the pressure drops in the upper portion. When the valve permits unrestricted flow again, the sudden return to pressure equilibrium produces the jar stroke.

Wenzel, K.H.

1980-10-28T23:59:59.000Z

224

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Ireland P Tool Applications Free Recently Updated PASSPORT heating requirements, passive solar, residential buildings, standards...

225

Tools and Products  

Science Conference Proceedings (OSTI)

A look at new products on the market, including the BOXX Technologies' Apexx 4 Super-Workstation and renderBOXX Classic 7500, Dimension 3D Printers from Tekpro Group, Micronas' VCT-Premium single-chip flat panel TV processors, Cyberware Head and Face ... Keywords: graphics tools, graphics products

Carl Machover; David J. Kasik

2007-11-01T23:59:59.000Z

226

Solar heating demonstration. Final report  

DOE Green Energy (OSTI)

The demonstration involved a 4-panel solar collector mounted on the industrial arts building. A 120 gallon storage tank supplements a 66 gallon electric hot water heater which supplies hot water for 5 shop wash basins, girl's and boy's lavatories, and a pressure washer in the auto shop. The installation and educational uses of the system are described. (MHR)

Bonicatto, L.; Kozak, C.

1980-01-01T23:59:59.000Z

227

Spray-formed tooling  

SciTech Connect

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be de signed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

McHugh, K.M.; Key, J.F.

1994-12-31T23:59:59.000Z

228

Alternative Fuels Data Center: Tools  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Tools to someone by Tools to someone by E-mail Share Alternative Fuels Data Center: Tools on Facebook Tweet about Alternative Fuels Data Center: Tools on Twitter Bookmark Alternative Fuels Data Center: Tools on Google Bookmark Alternative Fuels Data Center: Tools on Delicious Rank Alternative Fuels Data Center: Tools on Digg Find More places to share Alternative Fuels Data Center: Tools on AddThis.com... Tools The Alternative Fuels Data Center offers a large collection of helpful tools. These calculators, interactive maps, and data searches can assist fleets, fuel providers, and other transportation decision makers in their efforts to reduce petroleum use. Calculators Vehicle Cost Calculator Compare cost of ownership and emissions for most vehicle models. Icon_mobile_version mobile

229

Building Energy Software Tools Directory: ISOVER Energi  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory Printable Version Share this resource Home About the Directory Tools by Subject Tools Listed Alphabetically Tools by Platform PC...

230

Venn Diagram Tool Kit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Are you a Are you a passionate learner? Continual Learning Program: Employee Development Provides tools and resources for promoting continual learning, individual development, and strategic workforce development at the Department of Energy. It includes three learning sessions described below. Do you work in a learning organization? Will you invest in your own development and are looking for a way to get started? Let us help Keep Learning Even with Tight Budgets When you attend the session, you will be able to:  Discuss the Importance of continual learning  Explain an easy way to approach self-development  Create blended learning strategies for development  Use a tool for planning your IDP Let's Work on Your IDP When you attend the session, you will be able to:

231

Hopper Software and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

File Storage and I/O File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Carver PDSF Genepool Testbeds Retired Systems Data & File Systems Network Connections Queues and Scheduling Job Logs & Analytics Training & Tutorials Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Computational Systems » Hopper » Software and Tools

232

Nucleic Acid Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Nucleic Acid Tools Nucleic Acid Tools RNA 3D Motif Atlas, a representative collection of RNA 3D internal and hairpin loop motifs. Petrov, A.I., Zirbel, C.L., Leontis, N.B. (2013) Automated classification of RNA 3D motifs and the RNA 3D motif atlas. RNA. Non-redundant List of RNA-containing 3D structures. Leontis, N.B., & Zirbel, C.L. (2012) In Leontis, N. B., Westhof. E. (ed.), RNA 3D structure analysis and prediction. Springer Berlin Heidelberg Vol. 27, pp. 281-298. RNA Base Triple Atlas, a collection of motifs consisting of two RNA basepairs. Abu Almakarem, A.S., Petrov, A.I., Stombaugh, J., Zirbel, C.L. and Leontis, N.B. (2012) Comprehensive survey and geometric classification of base triples in RNA structures. Nucleic Acids Res, 40, 1407-1423. R3D Align, an application for detailed nucleotide to nucleotide

233

Pneumatic soil removal tool  

DOE Patents (OSTI)

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

Neuhaus, John E. (Newport News, VA)

1992-01-01T23:59:59.000Z

234

Pneumatic soil removal tool  

Science Conference Proceedings (OSTI)

A soil tool is provided for removing radioactive soil, rock and debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator value mounted on the handle, to provide movement of the movable jaw.

Neuhaus, J.F.

1991-01-23T23:59:59.000Z

235

Pneumatic soil removal tool  

Science Conference Proceedings (OSTI)

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

Neuhaus, J.E.

1992-10-13T23:59:59.000Z

236

Building Energy Software Tools Directory: EnergySavvy  

NLE Websites -- All DOE Office Websites (Extended Search)

EnergySavvy EnergySavvy logo One stop shop for homeowners wishing to increase their home's efficiency. Homeowners can use an online energy calculator to rate their home's current...

237

REMOTE RETRIEVING TOOL  

DOE Patents (OSTI)

A retrieving tool is described to securely grasp an object for emplacement in, or withdrawal from, an elongated tube. The object is grasped by hooks actuated by a wedge and cann mechanism. The mechanism on the end of a long rodlike structure is controlled by levers or bars at the access end of the tube. This device is particularly useful for positioning fuel elements within a reactor core.

Fromm, L.W. Jr.

1958-08-19T23:59:59.000Z

238

Java Vertexing Tools  

SciTech Connect

This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

Strube, Jan; /Oregon U.; Graf, Norman; /SLAC

2006-03-03T23:59:59.000Z

239

Powerful tool to expand . . .  

E-Print Network (OSTI)

With the extensive inclusion of document, especially text, in the business systems, data mining does not cover the full scope of Business Intelligence. Data mining cannot deliver its impact on extracting useful details from the large collection of unstructured and semi-structured written materials based on natural languages. The most pressing issue is to draw the potential business intelligence from text. In order to gain competitive advantages for the business, it is necessary to develop the new powerful tool, text mining, to expand the scope of business intelligence. In this paper, we will work out the strong points of text mining in extracting business intelligence from huge amount of textual information sources within business systems. We will apply text mining to each stage of Business Intelligence systems to prove that text mining is the powerful tool to expand the scope of BI. After reviewing basic definitions and some related technologies, we will discuss the relationship and the benefits of these to text mining. Some examples and applications of text mining will also be given. The motivation behind is to develop new approach to effective and efficient textual information analysis. Thus we can expand the scope of Business Intelligence using the powerful tool, text mining.

Li Gao; et al.

2005-01-01T23:59:59.000Z

240

Grid reliability management tools  

SciTech Connect

To summarize, Consortium for Electric Reliability Technology Solutions (CERTS) is engaged in a multi-year program of public interest R&D to develop and prototype software tools that will enhance system reliability during the transition to competitive markets. The core philosophy embedded in the design of these tools is the recognition that in the future reliability will be provided through market operations, not the decisions of central planners. Embracing this philosophy calls for tools that: (1) Recognize that the game has moved from modeling machine and engineering analysis to simulating markets to understand the impacts on reliability (and vice versa); (2) Provide real-time data and support information transparency toward enhancing the ability of operators and market participants to quickly grasp, analyze, and act effectively on information; (3) Allow operators, in particular, to measure, monitor, assess, and predict both system performance as well as the performance of market participants; and (4) Allow rapid incorporation of the latest sensing, data communication, computing, visualization, and algorithmic techniques and technologies.

Eto, J.; Martinez, C.; Dyer, J.; Budhraja, V.

2000-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Building Energy Software Tools Directory: Tools by Platform  

NLE Websites -- All DOE Office Websites (Extended Search)

PC Mac UNIX Internet Tools by Country Related Links Tools by Platform PC Mac UNIX Internet Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated:...

242

Building Energy Software Tools Directory: SunTools  

NLE Websites -- All DOE Office Websites (Extended Search)

SunTools SunTools logo A Plug-in for SketchUp that allows visualization of sun position and sun path, produces axonometric views from the sun to analyze mutual shading, and easy...

243

The Maker not the Tool The Maker not the Tool  

E-Print Network (OSTI)

make any chim- panzee tool, without training and in a few seconds, but stone knapping is an esoteric

244

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Hungary A Tool Applications Free Recently Updated AVReporter Energy management, energy monitoring, reducing CO2, increase energy efficency, ISO50001...

245

Groove refinishing tool  

DOE Patents (OSTI)

A groove refinishing tool which utilizes a finishing wheel which is controlled by an air grinder motor. The air grinder motor is mounted on a main body section which is pivotally attached to a shoe element. The shoe element contains guide pins which guide the shoe element on the groove to be refinished. Application of pressure on the main body element compresses a weight counterbalance spring to extend the finishing wheel through the shoe element to refinish the groove surface. A window is provided for viewing the refinishing operation. Milling operations can also be performed by replacing the finishing wheel with a milling wheel.

Kellogg, Harvey J. (Homossassa, FL); Holm, Robert O. (Santa Fe, NM)

1983-01-01T23:59:59.000Z

246

Energy Tracking Tool | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal agencies Tools & Resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources...

247

Wafer handling and placement tool  

DOE Patents (OSTI)

A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

Witherspoon, Linda L. (22 Cottonwood La., Los Lunas, NM 87031)

1988-01-05T23:59:59.000Z

248

cast shop technology i  

Science Conference Proceedings (OSTI)

M.D. Hurd, L.J. Laviolette and M.E. Lewellyn. Mitigation of ... The Determination of the Exposure to Electromagnetic Fields in Aluminum Electrolysis [pp. 253-259

249

cast shop technology i  

Science Conference Proceedings (OSTI)

Upgradation of Alumina Refinery at Hindalco Renukoot (India) R.P. Shah and .... The Influence of Crude Oil Desalting on Calcined Coke Quality (abstract only)

250

cast shop technology i  

Science Conference Proceedings (OSTI)

Guy Leblanc, and Vincent J. Newberry. Laboratory Investigations About the Influence of Starting Conditions on Butt Curl and Swell of DC Cast Sheet Ingots [

251

Aluminum Cast Shop IV  

Science Conference Proceedings (OSTI)

Mar 6, 2013 ... The energy released from one kilogram of molten aluminium reacted with oxygen is equivalent to detonating 3 kilograms of trinitrotoluene ...

252

cast shop technology ii  

Science Conference Proceedings (OSTI)

Energy Efficiency Considerations on Monopolar Versus Bipolar Fused Salt .... Use of a Technical Audit to Improve the Safe Handling of Molten Materials [pp.

253

Online Shopping Tips  

Science Conference Proceedings (OSTI)

... Giant Texas Turkey (Feeds 75) $95.10, Texas Turkey (28 - 30 lb) (feeds 75) Maximum Price: $95.10 Unit Price: $3.17 per lb, Texas Turkey Unit Price ...

2012-01-30T23:59:59.000Z

254

Tools for the Mentee  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

For Mentee For Mentee June 2012 ONE PROGRAM BRINGING TOGETHER ALL DOE COMMUNITIES OF PRACTICE O O f f f f i i c c e e o o f f L L e e a a r r n n i i n n g g & & W W o o r r k k f f o o r r c c e e D D e e v v e e l l o o p p m m e e n n t t We will mentor, develop, and foster the professional growth and advancements through individual development planning for all individuals in the Department Federal workforce to ensure our employees have fulfilling and productive careers within the Department. DOE Strategic Plan (May 2011) Tools for Mentor Page 2 May 2012 Table of Contents Being an Effective Mentee ............................................................................................................ 3 Mentee Preparation .......................................................................................................... 3

255

Electronic authoring tools  

SciTech Connect

More than a decade ago, word processing software revolutionized the way documents were prepared, and productivity was increased. But the editing and formatting capabilities of most word processors did very little to prevent errors in spelling, typing, grammar, diction, style, or organization from slipping through to the final documents. In the past few years, the number of software tools that aid the author has increased substantially. They now vary in scope from simple spelling checkers to sophisticated diction analyzers and idea processors. Moreover, writing-aid-software described in this report is now available for many types of computing systems, including personal computers, scientific workstations, and mainframes. The various pieces of software can be used in interactive or non-interactive (batch) modes.

Hurford, J.M.

1987-01-01T23:59:59.000Z

256

Tools for the Mentor  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Mentor for Mentor June 2012 ONE PROGRAM BRINGING TOGETHER ALL DOE COMMUNITIES OF PRACTICE O O f f f f i i c c e e o o f f L L e e a a r r n n i i n n g g & & W W o o r r k k f f o o r r c c e e D D e e v v e e l l o o p p m m e e n n t t We will mentor, develop, and foster the professional growth and advancements through individual development planning for all individuals in the Department Federal workforce to ensure our employees have fulfilling and productive careers within the Department. DOE Strategic Plan (May 2011) Tools for Mentor Page 2 June 2012 Table of Contents Being an Effective Mentor ............................................................................................................ 3 Mentor Preparation .......................................................................................................... 3

257

PPA Tools and Update  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PPA Tools & Update Chandra Shah chandra.shah@nel.gov October 21, 2010 2 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * PPA (15 minutes) - Resources - Discussion * URESC (15 minutes) - URESC description - Issues description - Discussion Presentation/Discussion Overview 3 | FEDERAL ENERGY MANAGEMENT PROGRAM femp.energy.gov * PPA Web Site: http://www.eere.energy.gov/femp/financing/power_purchase_agreements.html - PPA Quick Guide http://www1.eere.energy.gov/femp/pdfs/ppa_guide.pdf - PPA Presentation (updated on periodic basis) - Sample Documents * Alternative Financing Options webinar recording http://apps1.eere.energy.gov/femp/training/course_detail_ondemand.cfm/CourseId=44 * FEMP Focus article (Fall 2007, p. 16-17) http://www1.eere.energy.gov/femp/news/fempfocus.html

258

Industrial Buildings Tools and Resources  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rolf Butters Rolf Butters Industrial Technologies Program Industrial Buildings Tools and Resources Webinar - June 11, 2009 Michael MacDonald Agenda  Introduction to Industrial Buildings Opportunity and Tools  EERE Funding, Opportunities, and Resources  Next Steps 6/11/2009 2 Facilities Energy  ITP has been working for a couple years now to develop tools to address facilities energy use, present in most plants, and about 8% of total sector energy use  First tool is a Score Card, implemented both as a stand- alone Excel file and for QuickPEP - Score Card has to be simple, so is approximate - But it can be a very important tool for scoping facilities energy use at a plant  Second tool is an adaptation of the BCHP Screening Tool, originally developed by the Distributed Energy program but

259

Downhole tool adapted for telemetry  

DOE Patents (OSTI)

A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

Hall, David R. (Provo, UT); Fox, Joe (Provo, UT)

2010-12-14T23:59:59.000Z

260

Ocean - Tools | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Tools Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov » Communities » Ocean Decision-Support Tools (DSTs): Science and information are fundamental to effective marine planning. Marine planning involves inclusive discussion and analyses of the status and potential uses of 3-dimensional areas of coastal, marine and Great Lakes ecosystems (including the water column) and their potential changes over time. Relevant spatial data and derived interpretive and analytical products (i.e. decision-support tools) help inform all phases of the marine planning process. To date, several decision-support tools have been develop to support marine planning efforts. Marine planners should carefully evaluate which tools best apply to their region or specific issue or project. Below is a list of

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...  

Open Energy Info (EERE)

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Name Global Solar Opportunity Tool: A Tool for Policy Makers and Energy...

262

Building Energy Software Tools Directory: Indoor Humidity Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor Humidity Tools Indoor Humidity Tools Indoor Humidity Tools logo. Integrated computer program intended to assist in diagnosing and solving problems of indoor air humidity and dryness. Indoor Humidity Tools is comprised of two sections: - Calculations provide humidity calculations. - Reference provides background information on humidity in convenient lookup formats, such as recommended indoor humidity levels for different types of spaces, against which calculations may be compared. Keywords indoor air humidity, dryness, condensation Validation/Testing N/A Expertise Required No special expertise required. Users first released in July 1997. Audience engineers, industrial hygienists and safety professionals, architects, building scientists, contractors, government air quality specialists, and

263

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability A B E G K L S U Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. BEES...

264

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

India E Tool Applications Free Recently Updated Eco Lumen lighting design, energy efficient Energy Demand Modeling Reference Energy System, Software, GUI, Planning, Energy Demand...

265

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Chile C Tool Applications Free Recently Updated Cepenergy Management Software for Buildings Energy management, energy efficiency, energy evaluation, energy simulation, energy...

266

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Denmark B I T Tool Applications Free Recently Updated Be06 energy performance, building regulations, house, office, commercial and institutional BSim building simulation, energy,...

267

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Egypt Z Tool Applications Free Recently Updated ZEBO design decision support; zero energy building; sensitivity analysis; energy simulation; thermal comfort; hot climate Free...

268

Building Energy Software Tools Directory: Tools by Platform ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip to Content U.S. Department of Energy Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory...

269

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Pakistan O R Tool Applications Free Recently Updated oTilt solar radiations, radiations on tilted surface, optimum tilt angle, optimum pitch angle, collector slope Free software....

270

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip to Content U.S. Department of Energy Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory...

271

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Tool Applications Free Recently Updated CYPE-Building Services building services, single model, energy simulation, sizing, HVAC, plumbing, sewage, electricity, solar, analysis of...

272

Building Energy Software Tools Directory: HEAT Energy Audit Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

not only compiles data in the field, but produces the reports you need for vendors, inventory control, auditing, invoicing and more. HEAT Energy Audit Tool is flexible,...

273

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Japan P S Tool Applications Free Recently Updated Popolo Utility Load Calculation Heat transfer, load calculation, BESTEST, GPL, Free source Software has been updated. PUtility...

274

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

F N P Tool Applications Free Recently Updated Flownex gas flow; liquid flow; dynamic; heat transfer; two phase; slurry NewQUICK Passive simulation, load calculations, natural...

275

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Brazil U Tool Applications Free Recently Updated UMIDUS moisture calculation, latent and sensible conduction loads, heat and mass transfer through building envelopes Free software....

276

Building Energy Software Tools Directory: SunTools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

277

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Australia A B C D L P S Tool Applications Free Recently Updated AWDABPT building temperature simulation, thermal performance Software has been updated. BEAVER energy simulation,...

278

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Netherlands B H Tool Applications Free Recently Updated Building Energy Modelling and Simulation: Self-Learning Modules energy simulation, buildings, courseware, self-learning,...

279

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Applications Free Recently Updated Shading II Geometrical ShadingInsolated Coefficient, Sun view, shadow calculation Software has been updated. SunTools Sun Path, Sun Views, Solar...

280

Building Energy Software Tools Directory: HEAT Energy Audit Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

LEDSGP/tools/toolkits | Open Energy Information  

Open Energy Info (EERE)

world Home About Tools Expert Assistance Events Publications Join Us Tools Activities Inventory LEDS Toolkits Knowledge Portals Featured Tools LEDS-Related Toolkits LEDS in...

282

Hydrogen Safety Knowledge Tools  

Science Conference Proceedings (OSTI)

With hydrogen gaining acceptance as an energy carrier for fuel cell vehicles and stationary fuel cell applications, a new community of hydrogen users is emerging and continues to grow. With this growth has come the need to spread the word about safe practices for handling, storing, and using hydrogen. Like all energy forms, hydrogen can be used safely through proper procedures and engineering techniques. However, hydrogen involves a degree of risk that must be respected, and the importance of avoiding complacency or haste in the safe conduct and performance of projects involving hydrogen cannot be overstated. To encourage and promote the safe use of hydrogen, Pacific Northwest National Laboratory (PNNL) has developed and continues to enhance two software tools in support of the U.S. Department of Energy's Fuel Cell Technologies Program: the Hydrogen Safety Best Practices online manual (www.H2BestPractices.org) and the Hydrogen Incident Reporting and Lessons Learned database (www.H2Incidents.org).

Fassbender, Linda L.

2011-01-31T23:59:59.000Z

283

Computer-Based Design Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Design Tools Reaching decisionmakers during the building design process Concerns about energy production's environmental effects, which gained their first wide public exposure...

284

Slide system for machine tools  

DOE Patents (OSTI)

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, S.S.; Green, W.L.

1980-06-12T23:59:59.000Z

285

Wachs Cutter Tooling Station (4495)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

is similar to previously operated facility tooling and will utilize an existing hydraulic unit. The temporary station location will require electrical feed, ventilation,...

286

Lawn and Garden Tool Hazards  

NLE Websites -- All DOE Office Websites (Extended Search)

Never wear loose jewelry when working with tools. * Never alter a product or remove any safety features, especially blade guards and electric plug grounding pins. * Check the...

287

NREL: Technology Deployment - Tool Development  

NLE Websites -- All DOE Office Websites (Extended Search)

renewable energy projects. NREL develops geographic tools, interactive calculators, market and metrics databases, and mobile applications to help inform sustainable energy...

288

Building Energy Software Tools Directory: CBE UFAD Cooling Design Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

CBE UFAD Cooling Design Tool CBE UFAD Cooling Design Tool CBE UFAD Cooling Design Tool logo The Center for the Built Environment's research team has developed a simplified, practical design procedure and associated software tool to determine cooling load requirements of underfloor air distribution (UFAD) systems. These are provided to improve the accuracy of airflow, thermal decay data, thermal comfort calculations, system design, and the operation of UFAD buildings. Screen Shots Keywords UFAD, underfloor, Cooling load calculator, cooling, stratification, thermal comfort Validation/Testing N/A Expertise Required Knowledge about cooling load calculation and UFAD. Users N/A Audience Practicing architects and engineers involved in the design, specification, and analysis of UFADs. Instructional tool in colleges and universities.

289

Building Energy Software Tools Directory: OnGrid Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

OnGrid Tool OnGrid Tool The OnGrid Tool is an Excel-based application assisting in PV system sizing, pricing and quoting. It enables solar installers to gather a customerÂ’s utility and site information quickly and efficiently. It calculates optimum system size, electricity bill savings, system incentives, and system net costs. It then calculates various economic benefit factors and produces a variety of proposals, quotes, and. The OnGrid Tool includes rates, incentives, and tax calculations, and estimates system performance, including all performance factors and shading data. Screen Shots Keywords solar, financial, payback, analysis, sales, tool, software, economics, proposal Validation/Testing The software is run through Microsoft Excel and results are available immediately. OnGrid uses the most credible sources for industry updates.

290

Energy Department Sets Tougher Standards for Clothes Washers...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

energy efficiency program sponsors, academia and nonprofit organizations to make energy efficiency a national priority. ENERGY STAR is one of several programs aimed at engaging...

291

New Energy Efficiency Standards for Residential Clothes Washers...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

focus on taking sensible steps to save families money while also reducing energy consumption, the Department of Energy today announced common-sense energy...

292

Server efficiency rating tool (SERT)  

Science Conference Proceedings (OSTI)

The Server Efficiency Rating Tool (SERT) [1] has been developed by Standard Performance Evaluation Corporation (SPEC) [2] at the request of the US Environmental Protection Agency (EPA) [3], prompted by concerns that US datacenters consumed almost 3% ... Keywords: benchmark, datacenter, energy efficiency, energy star, environmental protection agency, epa, power, rating tool, sert, server, spec

Klaus-Dieter Lange; Mike G. Tricker; Jeremy A. Arnold; Hansfried Block; Sanjay Sharma

2012-04-01T23:59:59.000Z

293

Battery switch for downhole tools  

Science Conference Proceedings (OSTI)

An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

Boling, Brian E. (Sugar Land, TX)

2010-02-23T23:59:59.000Z

294

Vehicle assisted harpoon breaching tool  

DOE Patents (OSTI)

A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

Pacheco, James E. (Albuquerque, NM); Highland, Steven E. (Albuquerque, NM)

2011-02-15T23:59:59.000Z

295

Data Management Tools  

SciTech Connect

What is data management (DM) and why is it important? As described in the ''Handbook of Data Management'' (Thuraisingham, 1998), data management is the process of understanding the data needs of an organization and making the data available to support the operations of the organization. The ultimate goal of data management is to provide the seamless access and fusion of massive amounts of data, information, and knowledge in a heterogeneous and real-time environment, and to support the functions and decision making processes of an organization. The important questions that need to be asked for proper data management are: who is going to be using the data, what types of data need to be stored, and how will this data be accessed? With these questions answered, the data management system (DMS) can then be created, or an existing system can be modified to meet the needs of the organization. The real importance of a data management system is to provide the end user with a consistent data set of known quality. The elements of a good data management system should include a system that: is modeled to how the data is collected and processed, is very well documented, has specifically defined data elements, and has supporting data documentation. Supporting documentation includes items like quality control (QC) data that is carried with the analytical data, and meta data (information about the data). Supporting documentation can be anything that is useful to the project and that needs to be accessed with the data. Data sets get better the more they are used. As errors and inconsistencies are identified and corrected, the data set improves. A good DMS will achieve this because its design promotes use, and the ultimate value of data is in its use rather than its storage. The development and use of Internet access tools, and existing environmental data management systems, can help reduce the effort and cost associated with setting up a DMS. This presentation will discuss the qualities of a good data management system and provide examples.

Ridley, M; Stoker, C

2001-02-12T23:59:59.000Z

296

Tool | OpenEI Community  

Open Energy Info (EERE)

Tool Tool Home Graham7781's picture Submitted by Graham7781(1992) Super contributor 26 June, 2013 - 09:17 NREL's Energy Databus storing big energy data campus databus energy meter data NREL OpenEI Tool The Energy Databus began as a project aimed at addressing campus energy consumption and tracking issues at NREL. Now, with the ability to store large amounts of data, some of which measured by the second, along with rich functionality, the open-source software tool could offer the same solutions to many facilities. Sfederspiel's picture Submitted by Sfederspiel(5) Member 20 May, 2013 - 13:28 Introducing FRED, Enabling Unique Visualization and Manipulation of Energy Data at Multiple Scales FRED Free Energy Data Map OpenEI Tool Visualization The U.S. Department of Energy, the Pacific Northwest National Laboratory,

297

Better Tools for Better Plants  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Better Tools for Better Plants Better Tools for Better Plants Andre de Fontaine Bill Orthwein, CEM Advanced Manufacturing Office, Office of Energy Efficiency and Renewable Energy U.S. Department of Energy November 15, 2011 2 | Advanced Manufacturing Office eere.energy.gov Today * New opportunities - AMO Overview - Better Buildings, Better Plants Program - Better Buildings, Better Plants Challenge * New and revised tool suite - Energy Management Toolkit - Updated system assessment tools - Tool-related training 3 | Advanced Manufacturing Office eere.energy.gov Manufacturing Matters * 11% of U.S. GDP * 12 million U.S. jobs * 60% of U.S. engineering and science jobs % Manufacturing Job Growth or Loss 31.8% of all manufacturing jobs lost from 2000-2011 Jobs 31% of all 2010 U.S. total energy consumption

298

Downhole tool sniffs out fractures  

SciTech Connect

This article reports that a new tool has been designed and successfully tested that can designate which direction from a borehole a particular fracture is located. Albuquerque-based Sandia National Laboratories tested the new tool. The prototype was built by Southwest Research Institute of San Antonio. During field tests, the tool detected simulated fractures more than 30 ft away from a test borehole. It determines fracture direction by transmitting highly directional and powerful radar pulses in a known direction. The pulses last eight billionths of a second and their frequency spectrum range up to the VHF (very high frequency) band. Discontinuities in the rock interrupt and reflect radar signals so that a signal's return to the tool indicates the presence of fractures. The return signal's time delay translates into distance from the borehole. The transmitter and receiver rotate in place, permitting the tool to scan for fractures in all directions.

Not Available

1987-05-01T23:59:59.000Z

299

Well tool lock mandrel and handling tools therefor  

SciTech Connect

A lock mandrel and running tool assembly for setting and locking a well tool in a landing nipple along a well bore is described comprising: a lock mandrel having a body provided with at least one side window; a support shoulder on the body for supporting the mandrel in a no-go landing nipple; a radially movable locking dog in the side window; a longitudinally movable expander sleeve in the body movable within the dog for expanding and locking the dog outwardly and releasing the dog for inward movement, the expander sleeve having an internal annular recess for engagement by a handling tool to move the sleeve upwardly and downwardly and an external annular latch boss along an upper end portion thereof; and a latch ring in the body around the expander sleeve above the locking dog for engagement with the latch boss on the sleeve when the sleeve is at an upper locking position to releasably hold the sleeve in the upper position. The running tool includes a head assembly for connection with an operating tool string; an upper retainer dog assembly supported from the head assembly for releasably coupling the running tool with the body of the lock mandrel; a lower locking lug assembly supported from the head assembly for releasably coupling the running tool with the expander sleeve of the lock mandrel to move the expander sleeve between locking and release positions.

Higgins, B.D.

1988-05-24T23:59:59.000Z

300

Geothermal Properties Measurement Tool | Open Energy Information  

Open Energy Info (EERE)

Geothermal Properties Measurement Tool Geothermal Properties Measurement Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geothermal Properties Measurement Tool Agency/Company /Organization: Oak Ridge National Laboratory Sector: Energy Focus Area: Geothermal Topics: Resource assessment Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.ornl.gov/sci/ees/etsd/btric/ground-source.shtml Cost: Free References: Geothermal Properties Measurement Tool [1] Logo: Geothermal Properties Measurement Tool The Geothermal Properties Measurement tool was developed at Oak Ridge National Laboratory for geothermal heat pump (GHP) designers and installers to better determine the geothermal properties of a certain location. The Geothermal Properties Measurement Excel tool was developed at Oak Ridge

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Energy Storage Computational Tool | Open Energy Information  

Open Energy Info (EERE)

Energy Storage Computational Tool Energy Storage Computational Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Storage Computational Tool Agency/Company /Organization: Navigant Consulting Sector: Energy Focus Area: Grid Assessment and Integration Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.smartgrid.gov/recovery_act/program_impacts/energy_storage_computat Country: United States Web Application Link: www.smartgrid.gov/recovery_act/program_impacts/energy_storage_computat Cost: Free Northern America Language: English Energy Storage Computational Tool Screenshot References: Energy Storage Computational Tool[1] SmartGrid.gov[2] Logo: Energy Storage Computational Tool This tool is used for identifying, quantifying, and monetizing the benefits

302

Building Energy Software Tools Directory: DOE Sponsored Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE Sponsored Tools DOE Sponsored Tools The Department of Energy sponsors continued development of a variety of building energy software tools. See the following for more information about software tools now under development: Whole-Building Energy Performance Simulation EnergyPlus A new-generation building energy simulation program from the creators of BLAST and DOE-2. DOE-2 An hourly, whole-building energy analysis program which calculates energy performance and life-cycle cost of operation. The current version is DOE-2.1E. Building Design Advisor Provides building decision-makers with the energy-related information they need beginning in the initial, schematic phases of building design through the detailed specification of building components and systems. SPARK Models complex building envelopes and mechanical systems that are beyond

303

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

A B C D E F G H I M N O P Q R S T U V Tool Applications Free Recently Updated Acuity Energy Platform energy efficiency software; customized business recommendation; commercial...

304

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

D E I S V Tool Applications Free Recently Updated ArchiWIZARD energy performance; 3-D graphics interface; solar and lighting simulation; real time updated results and changes;...

305

OpenEI/Tool/Keyword EERE tool | Open Energy Information  

Open Energy Info (EERE)

Agent-Based Model + Cost of Renewable Energy Spreadsheet Tool (CREST) + DOE-2 Building Energy Use and Cost Analysis Software + EnergyPlus 7.0 + Facility Energy Decision System +...

306

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Germany A C D E G P S T U Tool Applications Free Recently Updated ADELINE daylighting, lighting, commercial buildings buildings Software has been updated. CLIMATE 1 climate data,...

307

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Conservation C D E F G H I K M R S T U W Tool Applications Free Recently Updated Cymap Mechanical Load calculation, Pipe sizing & Radiator selection, Duct sizing, Hot and...

308

Planning tools and techniques for production evaluation and disassembly  

SciTech Connect

This paper describes the development and implementation of a computerized model to support production planning in a specialized type of remanufacturing facility, the Pantex Plant operated for the US Department of Energy. The model integrates two different production processes (nuclear weapon dismantlement and stockpile evaluation) which use common facilities and personnel, and reflects the interactions of scheduling constraints, material flow constraints and resource availability. These two processes reflect characteristics of flow-shop and job-shop operations in a single facility. Operational results from using the model are also discussed.

Kjeldgaard, E.A. [Sandia National Labs., Albuquerque, NM (United States); List, G.F. [Rensselaer Polytechnic Inst., Troy, NY (United States); Turnquist, M.A. [Cornell Univ., Ithaca, NY (United States); Jones, D.A. [Parallax, Inc., Albuquerque, NM (United States)

1996-12-01T23:59:59.000Z

309

HPC_Tools-Gerber.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

6, 2012 6, 2012 * Introduction * Debugging * Performance / Optimization Outline Videos, presentations, and references: http://www.nersc.gov/users/training/courses/CS267/ Also see the DOE Advanced Computational Tools: http://acts.nersc.gov 3 * Today's Talks - Strategies for parallel performance (D. Skinner) - Debugging and optimization tools (R. Gerber) * Take Aways - Common problems to look out for - How tools work in general - A few specific tools you can try - Where to get more information Introduction Debugging 4 * A bug is when your code - crashes - hangs (doesn't finish) - gets inconsistent answers - produces wrong answers - behaves in any way you didn't want it to What is a Bug? * The term "bug" was popularized by Grace Hopper (motivated by the

310

Tools & Techniques for Failure Analysis  

Science Conference Proceedings (OSTI)

Oct 31, 2013 ... Failure Analysis and Prevention: Tools & Techniques for Failure ... As lithium-ion battery technology continues to advance and is adopted in diverse markets, ... fracture origin and an understanding of the fracture event energy.

311

Human Factors Engineering Analysis Tool  

A new software tool enables the easy and quick selection of applicable regulatory guidelines as a starting point for human factors engineering (HFE) analyses.  Once selected, each guideline can be viewed on screen.  The software tracks and reports the ...

312

Google Tools - EETD Followup Seminar  

NLE Websites -- All DOE Office Websites (Extended Search)

Google Tools - EETD Followup Seminar Speaker(s): Charles Verboom Julie Petersen Date: April 1, 2010 - 12:00pm Location: 90-3122 The IT Division is moving forward with our rollout...

313

Seal for fluid forming tools  

SciTech Connect

An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

Golovashchenko, Sergey Fedorovich (Beverly Hills, MI); Bonnen, John Joseph Francis (Milford, MI)

2012-03-20T23:59:59.000Z

314

Petroleum Reduction Planning Tool | Open Energy Information  

Open Energy Info (EERE)

Petroleum Reduction Planning Tool Petroleum Reduction Planning Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Petroleum Reduction Planning Tool Agency/Company /Organization: National Renewable Energy Laboratory, United States Department of Energy Sector: Energy Focus Area: Biomass, Energy Efficiency, Fuels & Efficiency, Hydrogen, Transportation Phase: Prepare a Plan Topics: Analysis Tools, Pathways analysis Resource Type: Software/modeling tools User Interface: Website Complexity/Ease of Use: Not Available Website: www.afdc.energy.gov/afdc/prep/index.php OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Equivalent URI: cleanenergysolutions.org/content/petroleum-reduction-planning-tool Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation

315

Revised Finding of No Significant Impact for Expansion and Operation of the Central Shops Borrow Pit at the Savannah River Site (DOE/EA-1194)(10/29/03)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revised Finding of No Significant Impact Revised Finding of No Significant Impact for Expansion and Operation of the Central Shops Borrow Pit at the Savannah River Site Agency: U. S. Department of Energy Action: Revised Finding of No Significant Impact Summary: The Department of Energy (DOE) prepared an environmental assessment (EA) (DOE/EA-1194) in 1997 for the expansion and operation of the existing Central Shops Borrow Pit (i.e., SRS Facility 632-G) at the Savannah River Site (SRS), located near Aiken, South Carolina. This EA was prepared in accordance with the National Environmental Policy Act (NEPA) of 1969, as amended; the requirements of the Council on Environmental Quality Regulations for Implementing NEPA (40 CFR 15400-1508); and the DOE Regulations for Implementing NEPA (10 CFR 1021). Based on the analyses in the EA, DOE determined that

316

Building Energy Software Tools Directory: Tools by Country - Canada  

NLE Websites -- All DOE Office Websites (Extended Search)

Canada Canada A C D E F H I M P R S V Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. CATALOGUE windows, fenestration, product information, thermal characteristics Free software. DAYSIM annual daylight simulations, electric lighting energy use, lighting controls Free software. Software has been updated. EE4 CBIP whole building performance, building incentives Free software. Software has been updated. EE4 CODE standards and code compliance, whole building energy performance Free software. Software has been updated. Energy Profile Tool benchmarking, energy efficiency screening, end-use energy analysis, building performance analysis, utility programs ENERPASS

317

Business Data and Tools | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data and Tools BusinessUSA DataTools Apps Challenges Let's Talk BusinessUSA You are here Data.gov Communities BusinessUSA Business Data and Tools Explore the different data...

318

BCHP Screening Tool | Open Energy Information  

Open Energy Info (EERE)

BCHP Screening Tool BCHP Screening Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: BCHP Screening Tool Agency/Company /Organization: Oak Ridge National Laboratory Sector: Energy Focus Area: Buildings, Industry Phase: Determine Baseline, Develop Goals Resource Type: Software/modeling tools, Guide/manual User Interface: Desktop Application Website: www.coolingheatingpower.org/about/bchp-screening-tool.php References: http://www.coolingheatingpower.org/about/bchp-screening-tool.php Logo: BCHP Screening Tool The BCHP Screening Tool is software that can be used to estimate the energy consumption and economics of CHP systems in commercial buildings. The BCHP Screening Tool is software that can be used to estimate the energy consumption and economics of CHP systems in commercial buildings. This tool

319

Autonomie Automotive Simulation Tool | Open Energy Information  

Open Energy Info (EERE)

Autonomie Automotive Simulation Tool Autonomie Automotive Simulation Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Autonomie Automotive Simulation Tool Agency/Company /Organization: Argonne National Laboratory Focus Area: Economic Development, Vehicles Phase: Create a Vision Topics: Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.transportation.anl.gov/modeling_simulation/PSAT/autonomie.html OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Autonomie[1] Rapidly evaluate new powertrain and propulsion technologies for improving fuel economy through virtual design and analysis in a math-based simulation environment. Argonne has developed a new tool, called Autonomie, to accelerate the

320

Argonne National Laboratory Launches Bioenergy Assessment Tools...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Argonne National Laboratory Launches Bioenergy Assessment Tools Argonne National Laboratory Launches Bioenergy Assessment Tools September 30, 2013 - 4:00pm Addthis A researcher...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Building Energy Software Tools Directory: Evergreen LED  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Platform PC Mac UNIX Internet Tools by Country Related Links Evergreen LED Evergreen LED logo Evergreen LED has developed a unique energy savings calculator...

322

Graphical Contingency Analysis Tool - Energy Innovation Portal  

Technology Marketing Summary The Graphical Contingency Analysis (GCA) Tool is a visual analytic software tool that aids power grid operators and ...

323

Climate Compatible Development Tools | Open Energy Information  

Open Energy Info (EERE)

search Tool Summary Name: Climate Compatible Development Tools AgencyCompany Organization: Climate and Development Knowledge Network (CDKN), Ecofys, Institute of...

324

Building Technologies Office: Building Energy Software Tools...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Links This directory provides information on 404 building software tools for evaluating energy efficiency, renewable energy, and sustainability in buildings. The energy tools...

325

Consequence Management, Safeguards & Non-Proliferation Tools...  

NLE Websites -- All DOE Office Websites (Extended Search)

Consequence Management, Safeguards, and Non-Proliferation Tools SHARE Consequence Management, Safeguards and Non-Proliferation Tools UF 6 Enrichment Facility Visualization of the...

326

Building Energy Software Tools Directory: Cake Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

327

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

328

Measurement Science for Smart Machine Tools  

Science Conference Proceedings (OSTI)

... ASME B5.59-2, "Information Technology for Machine Tools—Part 2: Data Specification for Properties of Machine tools for Milling and Turning,"and ...

2012-12-21T23:59:59.000Z

329

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technology Marketing Summaries Here you’ll find marketing summaries of energy analysis models, tools, and software ...

330

Market Monitoring Tools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Market Monitoring Tools Market Monitoring Tools Use dispatch, profit, revenueoffer price, withholding sensitivities to identify opportunities for local advantage that give some...

331

Building Energy Software Tools Directory : Engineering Toolbox  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

332

Building Energy Software Tools Directory: Engineering Toolbox  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

333

NREL: Energy Analysis - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Most of these tools can be applied on a global, regional, local, or project basis. Energy Data for Decision Makers Crosscutting Analysis Models and Tools Technology Analysis Models...

334

Building Energy Software Tools Directory: Energy Expert  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

335

Building Energy Software Tools Directory: SUNREL  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

336

Building Energy Software Tools Directory: RIUSKA  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

337

Building Energy Software Tools Directory: TOP Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

338

Building Energy Software Tools Directory: BESTEST  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

339

Building Energy Software Tools Directory: SMILE  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

340

Building Energy Software Tools Directory: TRACE 700  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Building Energy Software Tools Directory: ADELINE  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

342

Building Energy Software Tools Directory: TRNSYS  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

343

Building Energy Software Tools Directory: Cepenergy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

344

Building Energy Software Tools Directory: Recurve  

NLE Websites -- All DOE Office Websites (Extended Search)

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory Search Search Help Building Energy Software Tools Directory...

345

VISTA - computational tools for comparative genomics  

E-Print Network (OSTI)

tools for comparative genomics Kelly A. Frazer 1 , LiorBerkeley, CA, 94720 Genomics Division, Lawrence Berkeleymultiple comparative genomics tools and provides users with

Frazer, Kelly A.; Pachter, Lior; Poliakov, Alexander; Rubin, Edward M.; Dubchak, Inna

2004-01-01T23:59:59.000Z

346

NREL: Systems Engineering - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

and Tools The NREL Systems Engineering Initiative develops, integrates, and analyzes wind energy system models. NREL has developed an overall integrated system analysis tool...

347

QuickPEP Tool Demonstration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

QuickPEP Tool Demonstration QuickPEP Tool Demonstration Riyaz Papar, PE, CEM Director, Energy Assets & Optimization Hudson Technologies Company William Orthwein, CEM US Department of Energy February 26, 2009 Agenda * Introduction * Plant Energy Profiling * QuickPEP Demonstration * New features in Quick 2.0 * Wrap Up * There are different levels of Plant Energy Profiling - 10,000 ft level - Overall Plant * Phone interview * 1-day plant walkthrough * Using QuickPEP - 1,000 ft level - System level * Gap Analysis (Qualitative only) * 1-day plant walkthrough * 3-day plant Energy Savings Assessments (ESA) * Using US DOE BestPractices System Tools Plant Energy Profiling 10,000 ft approach - The Big Picture in your Plant * Looking at the forest first - Understanding your plant from an energy supply & demand perspective

348

Combination drilling and skiving tool  

DOE Patents (OSTI)

A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

Stone, William J. (Kansas City, MO)

1989-01-01T23:59:59.000Z

349

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Economics 3 A B C D E F G H I K L M N O P Q R S T U V W Tool Applications Free Recently Updated 3E Plus insulation, insulation thickness Free software. Software has been...

350

Building Energy Software Tools Directory: Tools by Subject -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Simulation 1 A B C D E F G H I L M N O P Q R S T V Z Tool Applications Free Recently Updated 1D-HAM heat, air, moisture transport, walls Software has been updated. AEPS...

351

Tools & Resources: Resource Directory  

NLE Websites -- All DOE Office Websites (Extended Search)

Resource Directory Resource Directory The guidance documents and reports below have been used by Better Buildings Neighborhood Program partners to build their programs and guide them to early successes. The tools and calculators can be used by homeowners, business owners, and program designers to help determine energy savings and other benefits associated with energy efficiency upgrades. Guidance Documents and Reports Background Program Evaluation Program Updates and Lessons Learned Program Design Marketing and Driving Demand Financing and Incentives Workforce Development Partnering with Utilities Technical Resources Tools and Calculators For Homes For Commercial Buildings Emissions and Equivalency Calculators Guidance Documents and Reports Background Recovery Through Retrofit Report

352

Tubular well tool receiving conduit  

SciTech Connect

In combination, a well packer and a tubular well tool receiving conduit are described which consists of: a well packer having an expandable and retractable anchoring teeth and an expandable and retractable seal spaced from the anchoring teeth, a tubular well conduit including, a first plurality of circularly extending grooves on the inside of the conduit for coacting with the anchoring teeth for supporting the well tool in the conduit, a second plurality of circularly extending grooves on the inside of the conduit and positioned for coacting with the expandable seal for providing multiple seal points with the seal.

Durst, D.G.; Morris, A.J.

1986-07-15T23:59:59.000Z

353

Cool Farm Tool | Open Energy Information  

Open Energy Info (EERE)

Cool Farm Tool Cool Farm Tool Jump to: navigation, search Tool Summary Name: Cool Farm Tool Agency/Company /Organization: Unilever Sector: Land Focus Area: Agriculture Topics: Co-benefits assessment, Resource assessment Resource Type: Software/modeling tools User Interface: Spreadsheet Website: www.unilever.com/aboutus/supplier/sustainablesourcing/tools/?WT.LHNAV= Cost: Free Language: English Cool Farm Tool Screenshot References: Cool Farm Tool [1] Overview "The Cool Farm Tool is a new greenhouse gas calculator for farming. It's easy to use and gives instant results that invite users to try out alternatives and ask 'what if' questions. The tool was commissioned by Unilever from the University of Aberdeen The tool is ideal for farmers, supply chain managers and companies interested in quantifying their

354

Illustrative Scenarios Tool | Open Energy Information  

Open Energy Info (EERE)

Illustrative Scenarios Tool Illustrative Scenarios Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Illustrative Scenarios Tool Agency/Company /Organization: European Commission Focus Area: GHG Inventory Development Topics: Analysis Tools Website: www.eutransportghg2050.eu/cms/illustrative-scenarios-tool/ The SULTAN (SUstainabLe TrANsport) Illustrative Scenarios Tool is a high-level calculator to help provide estimates of the possible impacts of policy on transport in the European Union. The tool allows quick scoping of a range of transport policy options to help understand what scale of action might be required and may also be used as part of the analysis for final technical outputs of a project. How to Use This Tool This tool is most helpful when using these strategies:

355

Improved geothermal well logging tools  

DOE Green Energy (OSTI)

A geothermal well logging tool has been designed to operate at 275/sup 0/C and 7000 psi. The logging tool will initially consist of a manometer, a gradiomanometer and a thermometer; the electrical and mechanical design is such that a flowmeter and a caliper can be added as a later development. A unique feature of the logging tool is that it contains no downhole active electronics. The manometer is a standard high temperature pressure gauge. The gradiomanometer consists of a differential pressure gauge which is coupled to ports separated vertically by 2 ft. The differential pressure gauge is a new development; it is designed to measure a differential pressure up to 2 psi at a line pressure of 10,000 psi. The thermometer is a platinum resistance thermometer previously developed for oil well logging. The pressure gauges are both strain gauge types which allows all three gauges are both strain gauge types which allows all three gauges to be connected in series and driven from a constant current supply. This arrangement makes it possible to use a standard seven-conductor cable with no downhole switching. The joints in the sonde are electron beam welded, thus eliminating any sealed joints in the sonde wall. The logging tool will be tested first in an autoclave and in a geothermal well later in the program.

Kratz, H.R.

1977-06-01T23:59:59.000Z

356

Software tools for HVAC research  

Science Conference Proceedings (OSTI)

Energy saving methods can be employed to reduce energy consumption in buildings, or improve indoor thermal conditions. An example of those methods is the use of permeable coverings, but there are other important parameters like thermal inertia. To understand ... Keywords: Building, Computer, Design, Energy saving, HVAC, Software tools

José A. Orosa; Armando C. Oliveira

2011-10-01T23:59:59.000Z

357

VCAT: Visual Crosswalk Analysis Tool  

SciTech Connect

VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

Cleland, Timothy J. [Los Alamos National Laboratory; Forslund, David W. [Los Alamos National Laboratory; Cleland, Catherine A. [Los Alamos National Laboratory

2012-08-31T23:59:59.000Z

358

Shot Planning and Analysis Tools  

SciTech Connect

Shot planning and analysis tools (SPLAT) integrate components necessary to help achieve a high over-all operational efficiency of the National Ignition Facility (NIF) by combining near and long-term shot planning, final optics demand and supply loops, target diagnostics planning, and target fabrication requirements. Currently, the SPLAT project is comprised of two primary tool suites for shot planning and optics demand. The shot planning component provides a web-based interface to selecting and building a sequence of proposed shots for the NIF. These shot sequences, or 'lanes' as they are referred to by shot planners, provide for planning both near-term shots in the Facility and long-term 'campaigns' in the months and years to come. The shot planning capabilities integrate with the Configuration Management Tool (CMT) for experiment details and the NIF calendar for availability. Future enhancements will additionally integrate with target diagnostics planning and target fabrication requirements tools. The optics demand component is built upon predictive modelling of maintenance requirements on the final optics as a result of the proposed shots assembled during shot planning. The predictive models integrate energetics from a Laser Performance Operations Model (LPOM), the status of the deployed optics as provided by the online Final Optics Inspection system, and physics-based mathematical 'rules' that predict optic flaw growth and new flaw initiations. These models are then run on an analytical cluster comprised of forty-eight Linux-based compute nodes. Results from the predictive models are used to produce decision-support reports in the areas of optics inspection planning, optics maintenance exchanges, and optics beam blocker placement advisories. Over time, the SPLAT project will evolve to provide a variety of decision-support and operation optimization tools.

Casey, A; Beeler, R; Conder, A; Fallejo, R; Flegel, M; Hutton, M; Jancaitis, K; Lakamsani, V; Potter, D; Reisdorf, S; Tappero, J; Whitman, P; Carr, W; Liao, Z

2011-07-25T23:59:59.000Z

359

Building Energy Software Tools Directory: Tools by Subject - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Conservation Water Conservation C D E F G H I K M R S T U W Tool Applications Free Recently Updated Cymap Mechanical Load calculation, Pipe sizing & Radiator selection, Duct sizing, Hot and cold water design, SAP, iSBEM, EPCs, Psychrometrics. Dataplus-online monitoring and targeting, energy management, self-billing e-Bench energy benchmarking, environmental benchmarking, energy audit, invoice verification and reconciliation, performance contract verification Software has been updated. E.A.S.Y. - Energy Accounting System for Your Buildings Energy Accounting, OMV System, Building baseline development, Energy and Emissions Savings Software has been updated. EA-QUIP building modeling, energy savings analysis, retrofit optimization (work scope development), investment analysis, online energy analysis tool, multifamily building analysis Software has been updated.

360

VisTool: a Visual Tool for Querying Relational Databases  

E-Print Network (OSTI)

In this paper we describe VisTool, a prototype tool for querying relational databases by means of the visual query language VISIONARY. INTRODUCTION VISIONARY [1] is based on an iconic-diagrammatic paradigm used for both data and query representation. The external data model is called vision and is made up of the visual primitives of concept and association; the external query model is based on the definition of a dynamic and adaptive perspective for accessing data. The internal data model is relational, and the internal query model is SQL. The mapping between the visual and the relational worlds is established through an intermediate graph-based level. VISIONARY is mainly directed to naive and occasional users, who have no experience with data models and only have a general idea about the contents of the database; for this reason, the expressive power of VISIONARY is limited...

Francesca Benzi; Dario Maio; Stefano Rizzi

1998-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Building Energy Software Tools Directory: Be06  

NLE Websites -- All DOE Office Websites (Extended Search)

Be06 Be06 Be06 logo Calculates the energy demand of buildings in relation to the new energy requirements in the 2006 additions to the Danish Building Regulations 1995 implementing the EU EPBD, Energy Performance of Building Directive. Be06 calculations are performed in accordance with the mandatory calculation procedure described in SBi-direction 213: Energy Demand of Buildings (In Danish: SBi-anvisning 213: Bygningers Energibehov). The software uses the mandatory calculation core also developed by the Danish Building Research Institute, SBi. Be06 calculates the expected energy demand to operate the heating and climate conditioning systems in all types of buildings e.g. houses, block of flats, offices, institutions, schools, shops and workshops. The Be06 software calculates the needed energy supply to a building for room

362

TNA Data Collection Tool | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TNA Data Collection Tool TNA Data Collection Tool TNA Data Collection Tool The Training Needs Assessment (TNA) Data Collection Tool Instructions provides detailed guidance on how to complete the TNA Data Collection Tool. It is a good idea to print this document prior to completing the TNA Data Collection Tool. The TNA Data Collection Tool is an Excel spreadsheet that the organization's designating training POC will use to populate their organizations training needs. The training POC will enter mission critical training needs as well as competencies needed to meet their organization's mission. FY14 TNA Data Collection Tool Instructions FY14 TNA Data Collection Tool.xlsx Description FY14 TNA Data Collection Tool More Documents & Publications Reference Buildings by Building Type: Small office

363

CDM Sustainable Development Tool | Open Energy Information  

Open Energy Info (EERE)

CDM Sustainable Development Tool CDM Sustainable Development Tool Jump to: navigation, search Tool Summary Name: CDM Sustainable Development Tool Agency/Company /Organization: United Nations Framework Convention on Climate Change (UNFCCC) Secretariat Sector: Climate, Energy Topics: Analysis Tools User Interface: Website Complexity/Ease of Use: Simple Website: www.research.net/s.aspx?sm=18gHbqaSXStje1ZSfnNI3k2%2Be9hblXIZ7ZPrqk8cV Cost: Free Related Tools Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) TEEMP ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS An online tool that highlights the co-benefits brought about by Clean Development Mechanism (CDM) projects.

364

Building energy benchmarks and rating tools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Building energy benchmarks and rating tools Building energy benchmarks and rating tools Building energy benchmarks and rating tools Building energy benchmarks and rating tools More...

365

Building Energy Software Tools Directory: Construction R-value...  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory Printable Version Share this resource Home About the Directory Tools by Subject Tools Listed Alphabetically Tools by Platform PC...

366

Building Energy Software Tools Directory : Weather Data Viewer  

NLE Websites -- All DOE Office Websites (Extended Search)

by Subject Tools Listed Alphabetically Tools by Platform Tools by Country Related Links Weather Data Viewer Back to Tool Screenshot for Weather Data Viewer. Screenshot for...

367

Building Energy Software Tools Directory : Demand Response Quick...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response Quick Assessment Tool Back to Tool Demand response quick assessment tool screenshot Demand response quick assessment tool screenshot Demand response quick...

368

Advanced cryogenics for cutting tools. Final report  

SciTech Connect

The purpose of the investigation was to determine if cryogenic treatment improved the life and cost effectiveness of perishable cutting tools over other treatments or coatings. Test results showed that in five of seven of the perishable cutting tools tested there was no improvement in tool life. The other two tools showed a small gain in tool life, but not as much as when switching manufacturers of the cutting tool. The following conclusions were drawn from this study: (1) titanium nitride coatings are more effective than cryogenic treatment in increasing the life of perishable cutting tools made from all cutting tool materials, (2) cryogenic treatment may increase tool life if the cutting tool is improperly heat treated during its origination, and (3) cryogenic treatment was only effective on those tools made from less sophisticated high speed tool steels. As a part of a recent detailed investigation, four cutting tool manufacturers and two cutting tool laboratories were queried and none could supply any data to substantiate cryogenic treatment of perishable cutting tools.

Lazarus, L.J.

1996-10-01T23:59:59.000Z

369

Strategy making and power in environmental assessments. Lessons from the establishment of an out-of-town shopping centre in Vaesteras, Sweden  

SciTech Connect

This paper seeks to provide deeper insights into how EA ineffectiveness is produced in land use planning practice. This is explored in a study of local development planning in the city of Vaesteras, Sweden. The case in question is the development of a large out-of-town shopping centre, propelled by the establishment of a new IKEA furniture store. The Healey (2007) framework of planning as strategy making is applied as an analytical framework, together with a focus on power-knowledge relations. In the analysis, we identify a range of mechanisms that produced ineffectiveness by limiting the role of environmental knowledge throughout the planning process. The specific mechanisms we identified were related to the overall consensus perspective in local development strategies and plans, a lack of concretisation and integration of various policies and strategies, a range of exclusion mechanisms and an overall focus on mitigation and benefits of the process in question. In practice, these mechanisms were closely intertwined. Our main conclusion is, consequently, that increased effectiveness of EA would require fundamental transformation of the norms, frameworks and routines that implicitly and explicitly guide land use planning in practice. - Highlights: Black-Right-Pointing-Pointer We analyse how EA-ineffectiveness is produced in land use planning practice. Black-Right-Pointing-Pointer Several mechanisms produce EA-ineffectiveness throughout the whole planning process. Black-Right-Pointing-Pointer These mechanisms are often closely intertwined and mutually reinforcing each other. Black-Right-Pointing-Pointer Enhancing EA-effectiveness requires a fundamental shift of the norms, frameworks and routines shaping planning practice.

Isaksson, Karolina, E-mail: karolina.isaksson@vti.se [Mobility, Actors and Planning Processes (MAP), Swedish National Road and Transport Research Institute (VTI), 581 95 Linkoeping (Sweden); Storbjoerk, Sofie, E-mail: sofie.storbjork@liu.se [Department of Water and Environmental Studies (DWES) and Centre for Climate Science and Policy Research (CSPR), Linkoeping University, 581 83 Linkoeping (Sweden)

2012-04-15T23:59:59.000Z

370

Vehicle Technologies Office: Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools Software Tools Several software programs are available, either for free or for a nominal charge, that can assist fleet managers and technology developers in assessing the potential impacts of implementing new technologies. Autonomie Autonomie is a Plug-and-Play Powertrain and Vehicle Model Architecture and Development Environment to support the rapid evaluation of new powertrain/propulsion technologies for improving fuel economy through virtual design and analysis in a math-based simulation environment. Developed in partnership with General Motors, Autonomie is an open architecture to support the rapid integration and analysis of powertrain/propulsion systems and technologies for rapid technology sorting and evaluation of fuel economy improvement under dynamic/transient testing conditions. The capability to sort technologies rapidly in a virtual design environment results in faster improvements in real-world fuel consumption by reducing the time necessary to develop and bring new technologies onto our roads.

371

Lawn and Garden Tool Hazards  

NLE Websites -- All DOE Office Websites (Extended Search)

Root Out Lawn and Garden Tool Hazards For many Americans, working outdoors on the lawn and in the garden is a great way to exercise and relax. However, safety experts warn that, if caution is not employed with lawn and garden tools, you could wind up spending more time indoors, starting with a trip to a hospital emergency room. "The most frequent injuries are from lawn mowers, which are unforgiving machines," cautions John Drengenberg, manager of Consumer Affairs for Underwriters Laboratories Inc., Northbrook, Ill., a not-for-profit product safety testing organization. "Statistics tell us that each year lawn mower accidents send close to 85,000 people to emergency rooms. But that's not all. Nearly 15,000 others need medical treatment for injuries from trimmers and other power garden

372

Hydraulically actuated well shifting tool  

SciTech Connect

This patent describes a hydraulically actuated shifting tool for actuating a sliding member in a well tool. It comprises: a housing having a hydraulic fluid bore therein; shifting dog means positioned on the housing for movement away and toward the housing; locking dog means positioned on the housing for movement away and toward the body; shifting dog hydraulic actuating means in fluid communication with the bore for causing engagement of the shifting dogs with the sliding member; locking dog hydraulic actuating means in communication with the bore for causing engagement of the locking dogs with the locking means; and hydraulic shifting means in communication with the bore for causing relative movement between the shifting dog means and the locking dog means for shifting the sliding sleeve.

Roth, B.A.

1992-10-20T23:59:59.000Z

373

Wafer Replacement Cluster Tool (Presentation);  

DOE Green Energy (OSTI)

This presentation on wafer replacement cluster tool discusses: (1) Platform for advanced R and D toward SAI 2015 cost goal--crystal silicon PV at area costs closer to amorphous Si PV, it's 15% efficiency, inexpensive substrate, and moderate temperature processing (<800 C); (2) Why silicon?--industrial and knowledge base, abundant and environmentally benign, market acceptance, and good efficiency; and (3) Why replace wafers?--expensive, high embedded energy content, and uses 50-100 times more silicon than needed.

Branz, H. M.

2008-04-01T23:59:59.000Z

374

Program Development Tools and Infrastructures  

SciTech Connect

Exascale class machines will exhibit a new level of complexity: they will feature an unprecedented number of cores and threads, will most likely be heterogeneous and deeply hierarchical, and offer a range of new hardware techniques (such as speculative threading, transactional memory, programmable prefetching, and programmable accelerators), which all have to be utilized for an application to realize the full potential of the machine. Additionally, users will be faced with less memory per core, fixed total power budgets, and sharply reduced MTBFs. At the same time, it is expected that the complexity of applications will rise sharply for exascale systems, both to implement new science possible at exascale and to exploit the new hardware features necessary to achieve exascale performance. This is particularly true for many of the NNSA codes, which are large and often highly complex integrated simulation codes that push the limits of everything in the system including language features. To overcome these limitations and to enable users to reach exascale performance, users will expect a new generation of tools that address the bottlenecks of exascale machines, that work seamlessly with the (set of) programming models on the target machines, that scale with the machine, that provide automatic analysis capabilities, and that are flexible and modular enough to overcome the complexities and changing demands of the exascale architectures. Further, any tool must be robust enough to handle the complexity of large integrated codes while keeping the user's learning curve low. With the ASC program, in particular the CSSE (Computational Systems and Software Engineering) and CCE (Common Compute Environment) projects, we are working towards a new generation of tools that fulfill these requirements and that provide our users as well as the larger HPC community with the necessary tools, techniques, and methodologies required to make exascale performance a reality.

Schulz, M

2012-03-12T23:59:59.000Z

375

Model Transformations And Tool Integration  

E-Print Network (OSTI)

Model transformations are increasingly recognised as being of significant importance to many areas of software development and integration. Recent attention on model transformations has particularly focused on the OMG's Queries / Views / Transformations (QVT) Request for Proposals (RFP). In this paper I motivate the need for dedicated approaches to model transformations, particularly for the data involved in tool integration, outline the challenges involved, and then present a number of technologies and techniques which allow the construction of flexible, powerful and practical model transformations.

Laurence Tratt

2004-01-01T23:59:59.000Z

376

PowerTools | Open Energy Information  

Open Energy Info (EERE)

PowerTools PowerTools Jump to: navigation, search Tool Summary LAUNCH TOOL Name: PowerTools Agency/Company /Organization: Candi Controls Sector: Energy Resource Type: Software/modeling tools User Interface: Website Website: www.sdge.com/using-green-button-connect-my-data Language: English PowerTools Screenshot References: SDG&E[1] Use to check recent energy use, set and manage energy saving goals, and track weather patterns related to energy use. Overview PowerTools is a free, secure app that helps you understand your energy use, take action to reduce your energy costs, and stay connected to SDG&E. PowerTools for SDG&E uses your actual energy data through Green Button Connect My Data. You must be an SDG&E customer, use My Account and register for a login at http://www.sdge.com/using-green-button-connect-my-data.

377

Building Technologies Office: Building America Research Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools to someone by E-mail Tools to someone by E-mail Share Building Technologies Office: Building America Research Tools on Facebook Tweet about Building Technologies Office: Building America Research Tools on Twitter Bookmark Building Technologies Office: Building America Research Tools on Google Bookmark Building Technologies Office: Building America Research Tools on Delicious Rank Building Technologies Office: Building America Research Tools on Digg Find More places to share Building Technologies Office: Building America Research Tools on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Research Innovations Research Tools Building Science Education Climate-Specific Guidance Solution Center Partnerships Meetings Publications Home Energy Score

378

Climate Action Planning Tool | Open Energy Information  

Open Energy Info (EERE)

Planning Tool Planning Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Climate Action Planning Tool Agency/Company /Organization: National Renewable Energy Laboratory Sector: Climate, Energy Focus Area: Renewable Energy, Buildings, Energy Efficiency, Greenhouse Gas, Industry, - Industrial Processes, People and Policy, Transportation Phase: Prepare a Plan, Develop Finance and Implement Projects Resource Type: Guide/manual, Online calculator User Interface: Website Website: www.nrel.gov/applying_technologies/planning_tool/ Web Application Link: www.nrel.gov/applying_technologies/planning_tool/gather_data.cfm Cost: Free Overview This tool is a step by step calculator to find the impact of various technologies to an overall action plan. The target of the tool is research

379

LEDSGP/tools | Open Energy Information  

Open Energy Info (EERE)

tools tools < LEDSGP Jump to: navigation, search LEDSGP Logo.png Advancing climate-resilient low emission development around the world Home About Tools Expert Assistance Events Publications Join Us Tools Activities Inventory LEDS Toolkits Knowledge Portals Featured Tools Peer-Learning Tools LEDS Activity and Tool Inventory Our LEDS Activity and Tool Inventory provides links to many efforts aimed at assisting the design and implementation of LEDS internationally, including LEDS examples, LEDS case studies and support tools, training resources and presentations, lessons learned and best practices, as well as LEDS guides and manuals. LEDS Toolkits and Training Resources See these LEDS-related toolkits, which provide provide quick and easy access to resources and information for-and guide you through the

380

Building Energy Software Tools Directory: Tools by Country - Switzerland  

NLE Websites -- All DOE Office Websites (Extended Search)

Switzerland Switzerland A E F L M P U Tool Applications Free Recently Updated ACOUSALLE acoustics, codes and standards ECO-BAT environmental performance, life cycle assessment, sustainable development Software has been updated. EnerCAD Building Energy Efficiency; Early Design Optimization; Architecture Oriented; Life Cycle Analysis Software has been updated. flixo 2D heat transfer, cold bridge, fenestration, frame U-value, thermal bridge Software has been updated. LESO-COMFORT thermal comfort, load calculation, energy LESO-SHADE shading factors, solar shading, building geometry LESOCOOL airflow, passive cooling, energy simulation, mechanical ventilation LESODIAL Daylighting, early design stage, user-friendliness LESOKAI thermal tranmission, water vapor, building envelope Software has been updated.

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Building Energy Software Tools Directory: Tools by Subject - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility Evaluation Utility Evaluation A B C D E F G H I M N O P Q R S T U V W Tool Applications Free Recently Updated Acuity Energy Platform energy efficiency software; customized business recommendation; commercial and industrial energy use comparisons Software has been updated. AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. Benchmata Automated Benchmarking System Automation Portfolio Manager Software has been updated.

382

Building Energy Software Tools Directory: Tools by Subject - Whole Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Sustainability A B E G K L S U Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. BEES environmental performance, green buildings, life cycle assessment, life cycle costing, sustainable development Free software. Software has been updated. Building Greenhouse Rating operational energy, greenhouse performance, national benchmark Free software. Building Performance Compass Commercial Buildings, Multi-family Residence, Benchmarking, Energy Tracking, Improvement Tracking, Weather Normalization BuildingAdvice Whole building analysis, energy simulation, renewable energy, retrofit analysis, sustainability/green buildings Software has been updated. ECO-BAT environmental performance, life cycle assessment, sustainable development Software has been updated.

383

HCHO Tool Report-Revised  

NLE Websites -- All DOE Office Websites (Extended Search)

A Formaldehyde Exposure Assessment Tool for Occupants of FEMA Temporary Housing Units Srinandini Parthasarathy, Michael Spears, Randy L. Maddalena, Marion L Russell, Michael G. Apte Environmental Energy Technologies Division Indoor Environment Department Lawrence Berkeley National Laboratory Berkeley, CA 94720 October 2010 This work was supported by interagency agreement 08FED894632 by the National Center for Environmental Health (NCEH) of the Centers for Disease Control and Prevention (CDC) and the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of BuildingTechnology, State, and Community Programs of the U.S. Department of Energy

384

Building Energy Codes Survey Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Codes Program Codes Program Building Energy Codes Survey Tool The following surveys are available: No available surveys Please contact ( webmaster@energycode.pnl.gov ) for further assistance. English Albanian Arabic Basque Belarusian Bosnian Bulgarian Catalan Chinese (Simplified) Chinese (Traditional; Hong Kong) Chinese (Traditional; Taiwan) Croatian Czech Danish Dutch Dutch Informal English Estonian Finnish French Galician German German informal Greek Hebrew Hindi Hungarian Icelandic Indonesian Irish Italian Italian (formal) Japanese Korean Latvian Lithuanian Macedonian Malay Maltese Norwegian (Bokmal) Norwegian (Nynorsk) Persian Polish Portuguese Portuguese (Brazilian) Punjabi Romanian Russian Serbian Sinhala Slovak Slovenian Spanish Spanish (Mexico) Swedish Thai Turkish Urdu Vietnamese Welsh

385

LEDSGP/tools/features | Open Energy Information  

Open Energy Info (EERE)

LEDSGP/tools/features LEDSGP/tools/features < LEDSGP‎ | tools Jump to: navigation, search LEDSGP Logo.png Advancing climate-resilient low emission development around the world Home About Tools Expert Assistance Events Publications Join Us Tools Activities Inventory LEDS Toolkits Knowledge Portals Featured Tools Featured Tools The following resources can be used to support different stages of low emissions development planning. Click here to add a capacity building or training resource to the inventory. Webinar on Development Impact Assessment for Low Emissions Development: As part of this webinar, several members of the LEDS Global Partnership set out to review existing approaches to capturing and communicating development benefits of climate action and propose a new tool for communicating development benefits to policy makers as part of a LEDS

386

Energy Data and Tools | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data and Tools Energy Data Apps Maps Challenges Resources Blogs Let's Talk Energy Beta You are here Data.gov Communities Energy Energy Data and Tools Take a look at the...

387

Scaling performance tool MPI communicator management  

Science Conference Proceedings (OSTI)

The Scalasca toolset has successfully demonstrated measurement and analysis scalability on the largest computer systems, however, applications have growing complexity and increasing demands on performance tools. One such application is the PFLOTRAN code ... Keywords: MPI communicators, performance measurement tools, scalability

Markus Geimer; Marc-André Hermanns; Christan Siebert; Felix Wolf; Brian J. N. Wylie

2011-09-01T23:59:59.000Z

388

Building Energy Software Tools Directory: SOLAR-5  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Platform PC Mac UNIX Internet Tools by Country Related Links SOLAR-5 SOLAR-5 logo. Displays 3-D plots of hourly energy performance for the whole building or...

389

Biopower Tool Webinar | Open Energy Information  

Open Energy Info (EERE)

Biopower Tool Webinar Biopower Tool Webinar Jump to: navigation, search Tool Summary Name: Biopower Tool Webinar Agency/Company /Organization: National Renewable Energy Laboratory, United States Department of Energy, Centro de Energías Renovables (CER) Sector: Energy Focus Area: Biomass, - Biofuels Resource Type: Maps, Training materials, Webinar References: Biopower Tool Webinar[1] Logo: Biopower Tool Webinar This webinar demonstrates uses for the Bio-power Tool, an interactive geospatial application allowing users to view biomass resources, infrastructure, and other relevant information, as well as query the data and conduct initial screening analyses. Webinar Video BATscreen.JPG Presentation Biopower Assessment Tool Presentation Announcement Wednesday, December 1, 2010 12-1 p.m. Golden, CO

390

Software tools for the graphic designer  

E-Print Network (OSTI)

This thesis describes three packages of programs of interest to the graphic designers: (l) a tool for pointing at objects on the display monitor, (2) a tool for organizing sets of programs into interactive menus, and (3) ...

Henigan, Nardy

1983-01-01T23:59:59.000Z

391

Assessment of Voltage Security Methods and Tools  

Science Conference Proceedings (OSTI)

To ensure voltage-secure operation of a power system, VAR control devices must be optimally placed and operated. This project assessed tools and methods that claim to help utilities meet these needs and recommended specific enhancements to these tools.

1995-10-26T23:59:59.000Z

392

Remixing physical objects through tangible tools  

E-Print Network (OSTI)

In this document we present new tools for remixing physical objects. These tools allow users to copy, edit and manipulate the properties of one or more objects to create a new physical object. We already have these ...

Follmer, Sean (Sean Weston)

2011-01-01T23:59:59.000Z

393

Built Environment Analysis Tool: April 2013  

Science Conference Proceedings (OSTI)

This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

Porter, C.

2013-05-01T23:59:59.000Z

394

Optimization of naïve dynamic binary instrumentation Tools/  

E-Print Network (OSTI)

The proliferation of dynamic program analysis tools has done much to ease the burden of developing complex software. However, creating such tools remains a challenge. Dynamic binary instrumentation frameworks such as ...

Kleckner, Reid (Reid N.)

2011-01-01T23:59:59.000Z

395

Documenting stone age cleverness by tool development  

NLE Websites -- All DOE Office Websites (Extended Search)

stone tools showing the pace of remarkable technological enhancements over time (1.75 to 0.85 million years ago). Credit, Los Alamos National Laboratory. Ancient stone tools...

396

Building Energy Software Tools Directory : HVAC Solution  

NLE Websites -- All DOE Office Websites (Extended Search)

HVAC Solution Back to Tool Screenshot for HVAC Solution. Screenshot for HVAC Solution. Screenshot for HVAC Solution...

397

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technologies Available for Licensing U.S. Department of Energy laboratories and participating research ...

398

Building Energy Software Tools Directory: ZIP  

NLE Websites -- All DOE Office Websites (Extended Search)

Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Envelope Systems HVAC Equipment & Systems Lighting Systems Other Applications Tools Listed...

399

Automated energy monitoring of machine tools  

E-Print Network (OSTI)

in the energy usage, such as increased total consumption fortotal energy use for the machine tool based on the usage

Vijayaraghavan, Athulan; Dornfeld, David

2010-01-01T23:59:59.000Z

400

Targeted Mutagenesis Tool in Mesophilic Cellulolytic ...  

Biomass and Biofuels Targeted Mutagenesis Tool in Mesophilic Cellulolytic Clostridia Species Oak Ridge National Laboratory. Contact ORNL About This ...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Building Energy Software Tools Directory : Window  

NLE Websites -- All DOE Office Websites (Extended Search)

Window Back to Tool Screenshot of WINDOW definition. Screenshot of WINDOW glass library. Screenshot of WINDOW assembly definition...

402

eRX Validation Tool @ NIST  

Science Conference Proceedings (OSTI)

... A Google Group has been established for discussion/questions of the Implementation Guide, testing tool and testing issues. ...

403

eRx Validation Tool @ NIST  

Science Conference Proceedings (OSTI)

... A Google Group has been established for discussion/questions of the Implementation Guide, testing tool and testing issues. ...

404

Building Energy Software Tools Directory: Tools by Subject - Whole Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Load Calculation Load Calculation A B C D E F G H I J L M N P Q R S T U V Tool Applications Free Recently Updated AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. AIRWIND Pro Air Conditioning Load Calculation AnTherm Thermal heat bridges, heat flow, steady state, 2D, 3D, transfer coefficients, thermal conductance, visualization, simulation, European standards, EPBD, temperature distribution, vapor transfer, vapor diffusion, avoiding moisture, avoiding mould, energy performance, linear thermal transmittance, point thermal transmittance, vapor pressure, surface condensation, thermal comfort, dew point Software has been updated.

405

Building Energy Software Tools Directory: Tools by Subject - Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Systems Lighting Systems A B C D E I K L M O Q R S T U V Tool Applications Free Recently Updated ADELINE daylighting, lighting, commercial buildings buildings Software has been updated. AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. AGI32 lighting, daylighting, rendering, roadway Software has been updated. BSim building simulation, energy, daylight, thermal and moisture analysis, indoor climate Software has been updated.

406

Building Energy Software Tools Directory: Tools by Subject - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Indoor Air Indoor Air A B C D E F I K L M P S T U V Tool Applications Free Recently Updated AcousticCalc HVAC acoustics, sound level prediction, noise level AnTherm Thermal heat bridges, heat flow, steady state, 2D, 3D, transfer coefficients, thermal conductance, visualization, simulation, European standards, EPBD, temperature distribution, vapor transfer, vapor diffusion, avoiding moisture, avoiding mould, energy performance, linear thermal transmittance, point thermal transmittance, vapor pressure, surface condensation, thermal comfort, dew point Software has been updated. BuildingAdvice Whole building analysis, energy simulation, renewable energy, retrofit analysis, sustainability/green buildings Software has been updated. BUS++ energy performance, ventilation, air flow, indoor air quality, noise level Software has been updated.

407

Building Energy Software Tools Directory: Tools by Subject - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Misc Applications Misc Applications A B C D E F G I K L M O P Q R S T U Tool Applications Free Recently Updated ACOUSALLE acoustics, codes and standards AcousticCalc HVAC acoustics, sound level prediction, noise level Acoustics Program HVAC acoustics, sound level prediction, noise level Software has been updated. AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. Animate animated visualization of data, XY graphs, energy-use data

408

Building Energy Software Tools Directory: Tools by Subject - Whole Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Renewable Energy Renewable Energy A B C D E F G H I L M N O P R S T U Z Tool Applications Free Recently Updated AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. Archelios PRO Photovoltaic simulation, 3D design, economics results BlueSol PV system sizing, PV system simulation, grid-connected PV systems, electrical components, shading, economic analysis. COMFIE energy performance, design, retrofit, residential buildings, commercial buildings, passive solar Software has been updated.

409

Building Energy Software Tools Directory: Tools by Subject - Whole Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Retrofit Analysis Retrofit Analysis A B C D E F G H I L M N O P R S T U V W Tool Applications Free Recently Updated AcousticCalc HVAC acoustics, sound level prediction, noise level AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. AFT Fathom design, pump selection, pipe analysis, duct design, duct sizing, chilled water systems, hot water system Software has been updated. AUDIT operating cost, bin data, residential, commercial

410

Building Energy Software Tools Directory: Tools by Subject - Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Hvac Systems Hvac Systems 3 A B C D E F G H I J K L M N O P Q R S T V Tool Applications Free Recently Updated 3E Plus insulation, insulation thickness Free software. Software has been updated. AcousticCalc HVAC acoustics, sound level prediction, noise level Acoustics Program HVAC acoustics, sound level prediction, noise level Software has been updated. AFT Fathom design, pump selection, pipe analysis, duct design, duct sizing, chilled water systems, hot water system Software has been updated. AFT Mercury optimization, pipe optimization, pump selection, duct design, duct sizing, chilled water systems, hot water systems AIRWIND Pro Air Conditioning Load Calculation Analysis Platform heating, cooling, and SWH equipment, commercial buildings

411

Building Energy Software Tools Directory: Tools by Platform - PC  

NLE Websites -- All DOE Office Websites (Extended Search)

PC PC 1 3 A B C D E F G H I J K L M N O P Q R S T U V W Z ¡ Tool Applications Free Recently Updated 1D-HAM heat, air, moisture transport, walls Software has been updated. 3E Plus insulation, insulation thickness Free software. Software has been updated. AAMASKY skylights, daylighting, commercial buildings ABACODE Residential code compliance, IECC Free software. ACOUSALLE acoustics, codes and standards AcousticCalc HVAC acoustics, sound level prediction, noise level Acoustics Program HVAC acoustics, sound level prediction, noise level Software has been updated. Acuity Energy Platform energy efficiency software; customized business recommendation; commercial and industrial energy use comparisons Software has been updated. ADELINE

412

Building Energy Software Tools Directory: Tools by Platform - Mac  

NLE Websites -- All DOE Office Websites (Extended Search)

Mac Mac A B C D E G H I L O P Q R S T W ¡ Tool Applications Free Recently Updated ABACODE Residential code compliance, IECC Free software. Acuity Energy Platform energy efficiency software; customized business recommendation; commercial and industrial energy use comparisons Software has been updated. AEPS System Planning electrical system, renewable energy system, planning and design software, modeling, simulation, energy usage, system performance, financial analysis, solar, wind, hydro, behavior characteristics, usage profiles, generation load storage calculations, on-grid, off-grid, residential, commercial, system sizing, utility rate plans, rate comparison, utility costs, energy savings Software has been updated. ArchiWIZARD energy performance; 3-D graphics interface; solar and lighting simulation; real time updated results and changes; thermal calculation; building performance; heat balance; thermal regulation

413

Building Energy Software Tools Directory: Tools by Country - Sweden  

NLE Websites -- All DOE Office Websites (Extended Search)

Sweden Sweden 1 B C D E H I P S U V Tool Applications Free Recently Updated 1D-HAM heat, air, moisture transport, walls Software has been updated. BV2 annual energy use, durational diagram Software has been updated. CELLAR cellar, heat loss, design rules DAVID-32 Thermal bridges, temperatures, heat flows, computer program, freeware Free software. Software has been updated. DEROB-LTH energy performance, heating, cooling, thermal comfort, design Software has been updated. EED Earth energy, boreholes, ground heat storage, ground source heat pump system (GSHP) HEAT2 heat transfer, 2D, dynamic, simulation Software has been updated. HEAT3 heat transfer, three-dimensional heat conduction, transient heat flow, steady-state heat flow Software has been updated.

414

Building Energy Software Tools Directory: Tools by Subject - Other  

NLE Websites -- All DOE Office Websites (Extended Search)

Multibuilding Facilities Multibuilding Facilities A B C E F G H I K L M N O P Q R T U V W Tool Applications Free Recently Updated AcousticCalc HVAC acoustics, sound level prediction, noise level Benchmata Automated Benchmarking System Automation Portfolio Manager Software has been updated. BuildingAdvice Whole building analysis, energy simulation, renewable energy, retrofit analysis, sustainability/green buildings Software has been updated. Carbon Estates Energy Benchmarking; Retrofitting Simulation; Energy Management; Carbon Management Software has been updated. Commodity Server energy database server, time series energy, portfolio management CONTAM airflow analysis; building controls; contaminant dispersal; indoor air quality, multizone analysis, smoke control, smoke management, ventilation Free software. Software has been updated.

415

Search Tool for Leveraged Procurement Agreements  

E-Print Network (OSTI)

Search Tool for Leveraged Procurement Agreements (LPA) Illustrated User Manual #12;2 Search Tool://www.bidsync.com #12;3 Search Tool for Leveraged Procurement Agreements (LPA) Rev. 5/5/09 Introduction Bid of the acquisition process. This manual will walk you through the process of searching Leveraged Procurement

416

CZT: a framework for Z tools  

Science Conference Proceedings (OSTI)

The Community Z Tools (CZT) project is an open-source Java framework for building formal methods tools for Z and Z dialects. It also includes a set of tools for parsing, typechecking, transforming and printing standard Z specifications in LATEX, Unicode ...

Petra Malik; Mark Utting

2005-04-01T23:59:59.000Z

417

Job-Shop Scheduling in a Body Shop  

E-Print Network (OSTI)

sions between industrial robots have to be taken into ac- count. ... The real world application which motivated this article arises from welding on car bodies: Let J ...

418

SECTION 10-SHOP AND SHOP/LAB SAFETY INTRODUCTION  

E-Print Network (OSTI)

and abrasive blasting, slate work, diatomite calcination Diatomaceous earth Roofing and asphalt felt Filling is often used generically even when other materials such as such as coal and metal slags, steel shot

Selmic, Sandra

419

Hot-Work Tool Steels  

Science Conference Proceedings (OSTI)

Table 9   Recommended heat-treating practices for hot-work tool steels...1600 â?¦ O, A 58â??59 6F6 Not rec 845 (pack) 1550 (peak) (p) (p) 196 650â??705 (1200â??1300) (q) 925â??955 (q) 1700â??1750 (q) â?¦ O (r) (s) 6F7 845â??870 (1550â??1600) 670 1240 22 40 260â??300 730 (1350) 915 1675 â?¦ A 54â??55 6H1 Not rec 845 1550 22 (t) 40 (t) 202â??235 760â??790 (1400â??1450) 900â??940 1650â??1725 â?¦ A 48â??49 6H2...

420

Attacks on Local Searching Tools  

E-Print Network (OSTI)

The Google Desktop Search is an indexing tool, currently in beta testing, designed to allow users fast, intuitive, searching for local files. The principle interface is provided through a local web server which supports an interface similar to Google.com's normal web page. Indexing of local files occurs when the system is idle, and understands a number of common file types. A optional feature is that Google Desktop can integrate a short summary of a local search results with Google.com web searches. This summary includes 30-40 character snippets of local files. We have uncovered a vulnerability that would release private local data to an unauthorized remote entity. Using two different attacks, we expose the small snippets of private local data to a remote third party.

Nielson, Seth James; Wallach, Dan S

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Building Software Tools with Interoperability  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Building Software Tools with Interoperability Vladimir Bazjanac, Ricardo Goncalves and Manfred Koethe. Vladimir Bazjanac (left) chairs the open IAI research advisory committee meeting held at San Diego in June. Next to him are Ricardo Goncalves, UNINOVA, and Manfred Koethe, DEC. Recently, architects and engineers (A&E) have begun to make building design and energy simulation software an indispensable part of their toolbox. Most A&E firms now use commercial, off-the-shelf design assistance programs. An increasing number of building professionals are also using software developed at the Center's Building Technology Program: the whole-building energy simulation program DOE-2 to design more energy-efficient structures, RADIANCE for simulating lighting designs, and WINDOW for calculating the

422

Jumpshot: Performance Visualization Tool | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Jumpshot: Performance Visualization Tool Jumpshot: Performance Visualization Tool Jumpshot: Performance Visualization Tool Jumpshot is a Java-based visualization tool for performing postmortem performance analysis. Using Java instead of Tcl/Tk (used in some older visualization tools) improves the portability, maintainability and functionalities of the tools. Jumpshot-4 is the latest viewer and is a total redesign of the graphical tool for SLOG-2. The new scalable logfile format allows the viewer to provide functionalities never made possible before. Level-of-detail support through preview drawables provides high-level abstraction of the details without reading in huge amount of data into the graphical display engine. The new Jumpshot allows seamless scrolling from the begining to the end of the logfile at any zoom-level. In addition, new functionlities like

423

Property:ToolComplexity | Open Energy Information  

Open Energy Info (EERE)

ToolComplexity ToolComplexity Jump to: navigation, search Property Name ToolComplexity Property Type Text Description Complexity, or ease of use, of tool/application Allows Values Simple;Moderate;Advanced;Not Available This is a property of type Text. Pages using the property "ToolComplexity" Showing 14 pages using this property. A Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool + Moderate Applied Dynamic Analysis of the Global Economy (ADAGE) Model + Advanced E Electricity Markets Analysis (EMA) Model + Advanced Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) + Simple Evaluating Public Transit Benefits and Costs: Best Practices Guidebook + Advanced G Global Bus Rapid Transit (BRT) Database + Not Available

424

Wind Project Siting Tools | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Wind Project Siting Tools Jump to: navigation, search Photo from Alstom 2010, NREL 18207 The following tools are helpful for anyone planning a wind project. Resources Cadmus Group. (2012). Distributed Wind Site Analysis Tool. Accessed March 29, 2013. The Distributed Wind Site Analysis Tool is an online tool for conducting detailed site assessments for single-turbine projects, from residential to community scale. Eastern Interconnection States' Planning Council. (2013). EISPC EZ Mapping Tool. Accessed August 13, 2013. This free online mapping tool helps to identify potential clean energy

425

Cast Shop for Aluminum Production  

Science Conference Proceedings (OSTI)

Organizer(s), Trond Furu, Hydro ... Review at Several US Aluminum Die Cast Manufacturers Using Unique, Non-Wetting, Micro-Porous Refractory Products.

426

Cast Shop for Aluminum Production  

Science Conference Proceedings (OSTI)

Implementation of a Global Casthouse Furnace Energy Efficiency Program at Rio Tinto ... Optimised Re-melting by the Use of Low-temperature Oxyfuel at Hydro ...

427

Process for selecting engineering tools : applied to selecting a SysML tool.  

SciTech Connect

Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

De Spain, Mark J.; Post, Debra S. (Sandia National Laboratories, Livermore, CA); Taylor, Jeffrey L.; De Jong, Kent

2011-02-01T23:59:59.000Z

428

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Focus Area: Solar Topics: Potentials & Scenarios Website: cleanenergysolutions.org/tools/solar Equivalent URI: cleanenergysolutions.org/content/global-solar-opportunity-tool-tool-po Language: English The Global Solar Opportunity Tool enables analysis and visualization of the technical and economic potential for solar electric technologies ranging

429

Slimhole frac pack tools overcome erosion problems  

SciTech Connect

The application of frac pack technology for stimulation and sand control in the Gulf of Mexico`s unconsolidated formations has steadily increased during the past several years. In addition, re-entry drilling has been one of the fastest growing development techniques used by operators for optimizing reservoir productivity. As such, smaller casing sizes are becoming more common in oil and gas producing wells. Gravel pack tools were being used for frac packing in 7-in. casing sizes and larger, but no tools were available to frac pack in the smaller 5-in. and 5{1/2}-in. casing. The erosion problems operators were experiencing in 7-in. gravel pack tools heightened concerns about fracturing through 5-in. tools with even smaller flow areas. Flow cutting in the 7-in. tools was so severe that it caused fluid communication between the gravel pack ports and the return flow holes in the crossover tool. This allowed fluid and proppant to return to the annulus above the packer, which could cause possible early screen-out and sticking of the crossover tool. The flow cutting could also reduce the tool`s pressure and tensile ratings. Any one of these problems could jeopardize the success of the frac pack operation. Therefore, an erosion resistant crossover tool for slimhole casing was developed to address these problems and optimize frac pack success.

Stout, G. [BJ Services, Tomball, TX (United States). Research and Development Center; Matte, T. [BJ Services, Lafayette, LA (United States); Rogers, B. [Marathon Oil Co., Lafayette, LA (United States)

1997-04-01T23:59:59.000Z

430

Precision pressure/temperature logging tool  

DOE Green Energy (OSTI)

Past memory logging tools have provided excellent pressure/temperature data when used in a geothermal environment, and they are easier to maintain and deploy than tools requiring an electric wireline connection to the surface. However, they are deficient since the tool operator is unaware of downhole conditions that could require changes in the logging program. Tools that make ``decisions`` based on preprogrammed scenarios can partially overcome this difficulty, and a suite of such memory tools has been developed at Sandia National Laboratories. The first tool, which forms the basis for future instruments, measures pressure and temperature. Design considerations include a minimization of cost while insuring quality data, size compatibility with diamond-cored holes, operation in holes to 425 C (800 F), transportability by ordinary passenger air service, and ease of operation. This report documents the development and construction of the pressure/temperature tool. It includes: (1) description of the major components; (2) calibration; (3) typical logging scenario; (4) tool data examples; and (5) conclusions. The mechanical and electrical drawings, along with the tool`s software, will be furnished upon request.

Henfling, J.A.; Normann, R.A.

1998-01-01T23:59:59.000Z

431

Building Energy Software Tools Directory: Energy Usage Forecasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Listed Alphabetically Tools by Platform Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India...

432

Building Energy Software Tools Directory: National Energy Audit...  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Platform PC Mac UNIX Internet Tools by Country Related Links National Energy Audit (NEAT) A user-friendly, advanced computer audit, the National Energy Audit Tool...

433

National SCADA Test Bed Consequence Modeling Tool | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

National SCADA Test Bed Consequence Modeling Tool National SCADA Test Bed Consequence Modeling Tool This document presents a consequence modeling tool that provides, for asset...

434

Building Energy Software Tools Directory: Energy Usage Forecasts  

NLE Websites -- All DOE Office Websites (Extended Search)

Alphabetically Tools by Platform PC Mac UNIX Internet Tools by Country Related Links Energy Usage Forecasts Energy Usage Forecasts Quick and easy web-based tool that provides...

435

Building Energy Software Tools Directory: National Energy Audit...  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Listed Alphabetically Tools by Platform Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India...

436

Software and Tools on Carver  

NLE Websites -- All DOE Office Websites (Extended Search)

Software and Tools The table below shows the software installed on Carver that is managed by modules. Package Category Version Module Install Date Date Made Default ABINIT applications/ material sciences 6.0.3 abinit/6.0.3 2010-05-06 ABINIT applications/ material sciences 6.10.3 abinit/6.10.3 2012-01-10 ABINIT applications/ material sciences 6.10.3-gpu abinit/6.10.3-gpu 2012-01-26 ABINIT applications/ material sciences 6.12.1 abinit/6.12.1 2012-02-13 ABINIT applications/ material sciences 6.12.1-gpu abinit/6.12.1-gpu 2012-02-06 ABINIT applications/ material sciences 6.12.1-magma abinit/6.12.1-magma 2012-02-10 ABINIT applications/ material sciences 6.2.2 abinit/6.2.2 2010-08-16 ABINIT applications/ material sciences 6.4.1 abinit/6.4.1 2010-11-24 2012-01-12

437

Design and analysis tool validation  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI) is developing a procedure for the validation of Building Energy Analysis Simulation Codes (BEAS). These codes are being used increasingly in the building design process, both directly and as the basis for simplified design tools and guidelines. The importance of the validity of the BEAS in predicting building energy performance is obvious when one considers the money and energy that could be wasted by energy-inefficient designs. However, to date, little or no systematic effort has been made to ensure the validity of the various BEAS. The validation work at SERI consists of three distinct parts: Comparative Study, Analytical Verification, and Empirical Validation. The procedures have been developed for the first two parts and have been implemented on a sampling of the major BEAS; results have shown major problems in one of the BEAS tested. Furthermore, when one building design was run using several of the BEAS, large differences were found in the predicted annual cooling and heating loads. The empirical validation procedure has been developed, and five two-zone test cells have been constructed for validation; a summer validation run will take place as soon as the data acquisition system is completed. Additionally, a test validation exercise is now in progress using the low-cal house to fine-tune the empirical validation procedure and better define monitoring data requirements.

Judkoff, R.

1981-07-01T23:59:59.000Z

438

Software and Analytical Tools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Information Resources » Software and Analytical Tools Information Resources » Software and Analytical Tools Software and Analytical Tools October 8, 2013 - 2:12pm Addthis Software and analytical tools are available to help Federal agencies implement energy- and water-efficiency projects. Building Energy Software Tools Directory: This U.S. Department of Energy's Building Technology Office website lists more than 400 software tools for evaluating energy efficiency in facilities. Building Life Cycle Cost (BLCC) Programs: The following National Institute of Standards and Technology programs help compute and analyze capital investments in buildings: BLCC5 Program: Analyze capital investments in buildings. Energy Escalation Rate Calculator: Compute an average annual escalation rate. Distributed Generation Energy Technology Capital Costs: This National

439

Tools (Intro Paragraph) | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools (Intro Paragraph) Tools (Intro Paragraph) Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov » Communities » Ocean Science and information are fundamental to effective marine planning. Marine planning involves inclusive discussion and analyses of the status and potential uses of 3-dimensional areas of coastal, marine and Great Lakes ecosystems (including the water column) and their potential changes over time. Relevant spatial data and derived interpretive and analytical products (i.e. decision-support tools) help inform all phases of the marine planning process. To date, several decision-support tools have been develop to support marine planning efforts. Marine planners should carefully evaluate which tools best apply to their region or specific issue or project. Below is a list of

440

Software demonstration: Demand Response Quick Assessment Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Software demonstration: Demand Response Quick Assessment Tool Software demonstration: Demand Response Quick Assessment Tool Speaker(s): Peng Xu Date: February 4, 2008 - 12:00pm Location: 90-3122 The potential for utilizing building thermal mass for load shifting and peak demand reduction has been demonstrated in a number of simulation, laboratory, and field studies. The Demand Response Quick Assessment Tools developed at LBNL will be demonstrated. The tool is built on EnergyPlus simulation and is able to evaluate and compare different DR strategies, such as global temperature reset, chiller cycling, supply air temperature reset, etc. A separate EnergyPlus plotting tool will also be demonstrated during this seminar. Users can use the tool to test EnergyPlus models, conduct parametric analysis, or compare multiple EnergyPlus simulation

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Home Energy Scoring Tool | Open Energy Information  

Open Energy Info (EERE)

Home Energy Scoring Tool Home Energy Scoring Tool Jump to: navigation, search Tool Summary Name: Home Energy Scoring Tool Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings - Residential Phase: Evaluate Effectiveness and Revise as Needed Topics: Resource assessment Resource Type: Online calculator User Interface: Website Website: www1.eere.energy.gov/buildings/homeenergyscore/ OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Home Energy Scoring Tool[1] Generate clear and credible home energy assessments; recommend customized upgrades and cost saving tips; compare the energy use of different homes The Home Energy Score allows a homeowner to compare her or his home's energy consumption to that of other homes, similar to a vehicle's

442

Ocean Applicable Tools | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Applicable Tools Applicable Tools Ocean Data Tools Technical Guide Map Gallery Regional Planning Feedback Ocean You are here Data.gov » Communities » Ocean Available Tools Click on each link to learn more about the purpose, methodology, and application of a tool or collection of tools. Artificial Intelligence for Ecosystem Services (ARIES) URL: http://www.ariesonline.org/ Purpose: ARIES was designed to make land use policy and environmental decisions easier and more effective by helping users map and quantify environmental assets and the factors that influence their value. ARIES allows users to model and quantify the impacts of landscape feature changes on the provision of ecosystem services, thereby allowing the evaluation and comparison of alternative scenarios for climate change, land use, or land

443

Results of Water and Sediment Toxicity Tests and Chemical Analyses Conducted at the Central Shops Burning Rubble Pit Waste Unit, January 1999  

SciTech Connect

The Central Shops Burning Rubble Pit Operable Unit consists of two inactive rubble pits (631-1G and 631-3G) that have been capped, and one active burning rubble pit (631-2G), where wooden pallets and other non-hazardous debris are periodically burned. The inactive rubble pits may have received hazardous materials, such as asbestos, batteries, and paint cans, as well as non-hazardous materials, such as ash, paper, and glass. In an effort to determine if long term surface water flows of potentially contaminated water from the 631-1G, 631-3G, and 631-2G areas have resulted in an accumulation of chemical constituents at toxic levels in the vicinity of the settling basin and wetlands area, chemical analyses for significant ecological preliminary constituents of concern (pCOCs) were performed on aqueous and sediment samples. In addition, aquatic and sediment toxicity tests were performed in accordance with U.S. EPA methods (U.S. EPA 1989, 1994). Based on the results of the chemical analyses, unfiltered water samples collected from a wetland and settling basins located adjacent to the CSBRP Operable Unit exceed Toxicity Reference Values (TRVs) for aluminum, barium, chromium, copper, iron, lead, and vanadium at one or more of the four locations that were sampled. The water contained very high concentrations of clay particles that were present as suspended solids. A substantial portion of the metals were present as filterable particulates, bound to the clay particles, and were therefore not biologically available. Based on dissolved metal concentrations, the wetland and settling basin exceeded TRVs for aluminum and barium. However, the background reference location also exceeded the TRV for barium, which suggests that this value may be too low, based on local geochemistry. The detection limits for both total and dissolved mercury were higher than the TRV, so it was not possible to determine if the TRV for mercury was exceeded. Dissolved metal levels of chromium, copper, iron, lead and vanadium were below the TRVs. Metal concentrations in the sediment exceeded the TRVs for arsenic, chromium, copper, and mercury but not for antimony and lead. The results of the water toxicity tests indicated no evidence of acute toxicity in any of the samples. The results of the chronic toxicity tests indicated possible reproductive impairment at two locations. However, the results appear to be anomalous, since the toxicity was unrelated to concentration, and because the concentrations of pCOCs were similar in the toxic and the non-toxic samples. The results of the sediment toxicity tests indicated significant mortality in all but one sample, including the background reference sediment. When the results of the CSBRP sediment toxicity tests were statistically compared to the result from the background reference sediment, there was no significant mortality. These results suggest that the surface water and sediment at the CSBRP Operable Unit are not toxic to the biota that inhabit the wetland and the settling basin.

Specht, W.L.

1999-06-02T23:59:59.000Z

444

Precision replenishable grinding tool and manufacturing process  

DOE Patents (OSTI)

A reusable grinding tool consisting of a replaceable single layer of abrasive particles intimately bonded to a precisely configured tool substrate, and a process for manufacturing the grinding tool are disclosed. The tool substrate may be ceramic or metal and the abrasive particles are preferably diamond, but may be cubic boron nitride. The manufacturing process involves: coating a configured tool substrate with layers of metals, such as titanium, copper and titanium, by physical vapor deposition (PVD); applying the abrasive particles to the coated surface by a slurry technique; and brazing the abrasive particles to the tool substrate by alloying the metal layers. The precision control of the composition and thickness of the metal layers enables the bonding of a single layer or several layers of micron size abrasive particles to the tool surface. By the incorporation of an easily dissolved metal layer in the composition such allows the removal and replacement of the abrasive particles, thereby providing a process for replenishing a precisely machined grinding tool with fine abrasive particles, thus greatly reducing costs as compared to replacing expensive grinding tools. 11 figs.

Makowiecki, D.M.; Kerns, J.A.; Blaedel, K.L.; Colella, N.J.; Davis, P.J.; Juntz, R.S.

1998-06-09T23:59:59.000Z

445

Marketing & Driving Demand: Social Media Tools & Strategies ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Marketing & Driving Demand: Social Media Tools & Strategies January 16, 2011 Maryanne Fuller (MF): Hi there. This is Maryanne Fuller from Lawrence Berkeley National Laboratory....

446

Precision non-contact polishing tool  

SciTech Connect

A non-contact polishing tool that combines two orthogonal slurry flow geometries to provide flexibility in altering the shape of the removal footprint. By varying the relative contributions of the two flow geometries, the footprint shape can be varied between the characteristic shapes corresponding to the two independent flow regimes. In addition, the tool can include a pressure activated means by which the shape of the brim of the tool can be varied. The tool can be utilized in various applications, such as x-ray optical surfaces, x-ray lithography, lenses, etc., where stringent shape and finish tolerances are required.

Taylor, John S. (Livermore, CA)

1997-01-01T23:59:59.000Z

447

Tools & Resources | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Clean Energy Home | Science & Discovery | Clean Energy | Tools & Resources SHARE Tools & Resources The following lists contain links to informational guides, helpful tools, and detailed resources. Energy and Transportation Fuel Economy.gov Freight Analysis Framework Transportation Energy Data Book National Household Transportation Survey Biomass Energy Databook Vehicle Technologies Market Report Intelligent Transportation Systems Tracking ITS Overview Commercial Motor Vehicle Roadside Technology Corridor FEERC Interactive Tour Building Technologies Research Foundation Handbook Roof Savings Calculator ZEBRAlliance WUFI Insulation Fact Sheet Heat Pump Design Model BCHP Screening Tool Low-Slope Roof Calculator for Commercial Buildings Moisture Control in Low Slope Roofing

448

Building Energy Software Tools Directory: METRIX4  

NLE Websites -- All DOE Office Websites (Extended Search)

METRIX4 METRIX4 logo. Tool for monitoring energy usage and verifying cost savings from energy conservation measures. Metrix4 establishes baseline and target usage patterns, which...

449

Building Energy Software Tools Directory: TRANSOL  

NLE Websites -- All DOE Office Websites (Extended Search)

TRANSOL TRANSOL is a tool for the design and optimization of solar thermal systems, based on dynamic simulation (TRNSYS). TRANSOL includes climatic data for all over the world,...

450

Building Energy Software Tools Directory: HVAC Solution  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

451

Building Energy Software Tools Directory: GPM PV+  

NLE Websites -- All DOE Office Websites (Extended Search)

implementation. Users Customers across several market segments. Industrial; commercial; higher education; Federal, state, and local government. Audience The tool can be used by...

452

Building Energy Software Tools Directory: Umberto  

NLE Websites -- All DOE Office Websites (Extended Search)

Umberto Umberto logo. Software tool for material and energy flow calculation and analysis based on graphical modelling of process systems. It has been developed by ifu (Institute...

453

Building Energy Software Tools Directory: IWEC  

NLE Websites -- All DOE Office Websites (Extended Search)

PC Mac UNIX Internet Tools by Country Related Links IWEC IWEC logo. Contains "typical" weather data in ASCII format files, suitable for use with building energy simulation...

454

Demand Response Quick Assessment Tool (DRQAT)  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response Quick Assessment Tool (DRQAT) The opportunities for demand reduction and cost saving with building demand responsive control vary tremendously with building type...

455

The Molecular Foundry - Nanofabrication - Capabilities and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

room Lithographic tools Vistec VB300UHR EWF electron-beam lithography system Synopsys CATS fracturing software Vistec VB300UHR EWF Electron-Beam Lithography System ZEISS...

456

Building Energy Software Tools Directory: Thermal Comfort  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

457

Risk Management Tool Attributes: | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Management Tool Attributes: More Documents & Publications Software Development Risk Assessment Risk Management RM Categorizing Threat Building and Using a Generic Threat Matrix...

458

MFL tool hardware for pipeline inspection  

SciTech Connect

The intelligent pig based on the magnetic flux leakage (MFL) is frequently used for inline inspection of gas and liquid transportation pipelines. The tool is capable of reliably detecting and characterizing several commonly occurring pipeline defects including metal loss due to corrosion and gouges, dents, and buckles, which tend to threaten the structural integrity of the pipeline. The defect detection and characterization capabilities of the tool are directly dependent upon the type of critical hardware components and systems selected for the tool assembly. This article discusses the key components of an advanced or high resolution MFL tool.

Tandon, K.K. [Engineers India Ltd., Haryana (India). Research and Development Complex

1997-02-01T23:59:59.000Z

459

Building Energy Software Tools Directory: Genability  

NLE Websites -- All DOE Office Websites (Extended Search)

electricity rate api, power rate api, energy rate api, utility pricing, utility price, utility rate ValidationTesting Genability has made the tools necessary available to test the...

460

Use ENERGY STAR benchmarking tools | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

tools Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Building Energy Software Tools Directory: Cepenergy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis of the Energy Matrix (Electricity, Water, Fuel), and CO2 emissions in buildings. Energy Problems, Saving and Optimizing. Tool of Management for Energy leakage. Culture and...

462

Building Energy Software Tools Directory: Cake Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Share this resource Home About the Directory Tools by Subject Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Other...

463

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Share this resource Home About the Directory Tools by Subject Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Envelope...

464

Building Energy Software Tools Directory: PVSYST  

NLE Websites -- All DOE Office Websites (Extended Search)

sizing, PV system simulation, grid-connected PV systems, stand-alone PV systems, shading, solar tools ValidationTesting Performed for 7 installations in Switzerland. Detailed...

465

Building Energy Software Tools Directory: IWRAPS  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric Pollution Energy Economics Indoor Air Quality Multibuilding Facilities SolarClimate Analysis Training Utility Evaluation Validation Tools VentilationAirflow...

466

Ootw Tool Requirements in Relation to JWARS  

Science Conference Proceedings (OSTI)

This document reports the results of the CMke of the Secretary of Defense/Program Analysis & Evaluation (OSD/PA&E) sponsored project to identify how Operations Other Than War (OOTW) tool requirements relate to the Joint Warfare Simulation (JWARS) and, more generally, to joint analytical modeling and simulation (M&S) requirements. It includes recommendations about which OOTW tools (and functionality within tools) should be included in JWARS, which should be managed as joint analytical modeling and simulation (M&S) tools, and which should be left for independent development.

Hartley III, D.S.; Packard, S.L.

1998-01-01T23:59:59.000Z

467

JOM: Author Tools - Types of Papers  

Science Conference Proceedings (OSTI)

HOME > Author Tools > Types of Papers. Types of Papers ... Explores materials usage and development throughout history. These articles must contain new ...

468

Building Energy Software Tools Directory: ZIP  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

469

Building Energy Software Tools Directory: Rehab Advisor  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Related Links Rehab Advisor Rehab Advisor logo. Designed to help homeowners, contractors, architects, housing authorities, development agencies, facility...

470

Building Energy Software Tools Directory: Building Greenhouse...  

NLE Websites -- All DOE Office Websites (Extended Search)

against the national benchmark. Computer Platform Internet-based Programming Language Java Strengths Unique tool for providing insight into the actual energy and greenhouse...

471

Building Energy Software Tools Directory: Evergreen LED  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

472

Building Energy Software Tools Directory: Evergreen LED  

NLE Websites -- All DOE Office Websites (Extended Search)

Evergreen LED Evergreen LED logo Evergreen LED has developed a unique energy savings calculator software tool to precisely calculate the energy savings, carbon savings, cost...

473

Building Energy Software Tools Directory : Energy Expert  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Expert Back to Tool Screenshot of load profile for Energy Expert Screenshot of calendar for Energy Expert Screenshot for building results in Energy Expert...

474

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technologies Available for Licensing U.S. Department of Energy laboratories and participating research institutions have ...

475

Building Energy Software Tools Directory: BSim  

NLE Websites -- All DOE Office Websites (Extended Search)

plants. The BSim package comprise the programs: SimView (user interface and graphic model editor), tsbi5 (simultaneous thermal and moisture building simulation tool), XSun...

476

Building Energy Software Tools Directory: Load Express  

NLE Websites -- All DOE Office Websites (Extended Search)

graphical interface makes Load Express a powerful engineering tool with a very short learning curve. The "rookie" or experienced user can quickly and accurately perform load...

477

Building Energy Software Tools Directory: EBS  

NLE Websites -- All DOE Office Websites (Extended Search)

invoice batching, and an optional interface to accounts payable. EBS also includes a query tool that allows information to be queried through the reporting engine. EBS utilizes...

478

Building Energy Software Tools Directory: Engineering Toolbox  

NLE Websites -- All DOE Office Websites (Extended Search)

Skip to Content U.S. Department of Energy Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Building Energy Software Tools Directory...

479

Building Energy Software Tools Directory: FASER  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

480

Building Energy Software Tools Directory: HEAT2  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

Note: This page contains sample records for the topic "washers shop tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Building Energy Software Tools Directory: Delphin  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

482

Building Energy Software Tools Directory: DPClima  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

483

Building Energy Software Tools Directory: VISION4  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

484

Building Energy Software Tools Directory: FRAME4  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

485

Building Energy Software Tools Directory: RESFEN  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

486

Building Energy Software Tools Directory: IPSE  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

487

Building Energy Software Tools Directory: PEAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

488

Building Energy Software Tools Directory: Roanakh  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

489

Building Energy Software Tools Directory: AGI32  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

490

Building Energy Software Tools Directory: SPARK  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

491

Building Energy Software Tools Directory: SUNDI  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

492

Building Energy Software Tools Directory: AAMASKY  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

493

Building Energy Software Tools Directory: PVSYST  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

494

Building Energy Software Tools Directory: COMcheck  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

495

Building Energy Software Tools Directory: SMILE  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

496

Building Energy Software Tools Directory: LESODIAL  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

497

Building Energy Software Tools Directory: CAMEL  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

498

Building Energy Software Tools Directory: EBS  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

499

Building Energy Software Tools Directory: PRISM  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

500

Building Energy Software Tools Directory: solacalc  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...