Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Gregory Zuckerman is a Special Writer at The Wall Street Journal and the author of "The Frackers: The Outrageous Inside Story of the New Billionaire  

E-Print Network [OSTI]

. At the Journal, Greg writes about big financial trades, hedge funds, privateequity firms, the energy revolution

Kheradvar, Arash

2

Wall Street: Money Never Sleeps (2010) In 2001, Gordon Gekko (Michael Douglas) is released from prison after serving eight years for  

E-Print Network [OSTI]

is pregnant, and Bretton reveals to Moore that the Chinese investment is going into bunk solar panels the research and save the company. She signs the money over to Moore who then entrusts it to GekkoWall Street: Money Never Sleeps (2010) In 2001, Gordon Gekko (Michael Douglas) is released from

Schenato, Luca

3

Restore the Economy with Loans to All Taxpayers The mess on Wall Street spilled over into the rest of the economy when it induced a crisis in  

E-Print Network [OSTI]

Restore the Economy with Loans to All Taxpayers The mess on Wall Street spilled over into the rest of the economy when it induced a crisis in confidence. People felt insecure and sought to increase their cash is to put enough money into the economy that people will be willing to spend at the level needed to keep

Buehrer, R. Michael

4

See a sample reprint in PDF format. Order a reprint of this article now WSJ's 'Intelligent Investor' Jason Zweig visits Mean Street and looks at the unique way in which Facebook is  

E-Print Network [OSTI]

' Jason Zweig visits Mean Street and looks at the unique way in which Facebook is intertwined Images. Christophe Vorlet for The Wall Street Journal Related Facebook's IPO Sputters Winners, Losers and the Road Not Taken to Facebook Wealth Trading Problems Mar Facebook's IPO The Intelligent Investor: Is 'You

Kuzmanovic, Aleksandar

5

FIA-13-0006- In the Matter of Wall Street Journal  

Broader source: Energy.gov [DOE]

On May 24, 2013, the Office of Hearings and Appeals (OHA) issued a decision denying an appeal (Appeal) from a Freedom of Information Act (FOIA) determination issued by the Department of Energyís ...

6

Secretary Chu's Op-Ed on Small Modular Reactors in the Wall Street Journal  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energyof the Americas | Department ofof Energy Chu to| Department of

7

Secretary Chu Op-Ed on Small Modular Reactors in the Wall Street Journal |  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September2-SCORECARD-01-24-13Discovers TransformersLetter toDepartment

8

POWs: Physicists on Wall Street  

SciTech Connect (OSTI)

Quantitative financial modeling seems to employ both the language and techniques of physics, but how similar are the two disciplines in theory and practice? This talk discusses the move from physics to finance, the nature of financial modeling and its deceptive similarity with theoretical physics, what it's like to work in the financial arena, and some of the open problems of interest.

Derman, Emanuel (Columbia University) [Columbia University

2006-10-30T23:59:59.000Z

9

46th Street Pilot Street Lighting Project  

E-Print Network [OSTI]

Street to 48th Street) as standard high-pressure sodium (HPS) lighting comparison corridor #12;The over time #12;Initial Lighting Comparison #12;Lighting Project Location #12;Street Light Layout 3046th Street Pilot Street Lighting Project A Joint Venture: Hennepin County & City of Minneapolis

Minnesota, University of

10

Article in Wall Street Journal, December 6, 2008, (U.S. News,p.3) (excerpt also at  

E-Print Network [OSTI]

. Another expansion in the Sunshine State and two others in Pennsylvania and Minnesota are in the works. In all, proposals for at least a dozen expansions or new plants are in the works across the U.S., from-energy projects, said Dave Traeger, a solid-waste consultant at HDR Inc., Omaha, Neb. The plants took off

Columbia University

11

Appeared in The Wall Street Journal on Wednesday, March 23, 2011 Budget Cuts and the Next Earthquake  

E-Print Network [OSTI]

earthquake, tsunami and nuclear power-plant crisis were merely the latest recent events to remind us high-speed trains, and to seek higher ground because of the tsunami threat. In the same vein, U

12

WOOD STREET METERED LOT  

E-Print Network [OSTI]

LOT E1 LOT O WOOD STREET METERED LOT LOT W5 LOT C4 LOT B4 LOT L LOT M MARSHFIELDAVENUE PAULINASTREET Clinical Sciences Building UI Hospital Wood Street Station Clinical Sciences North Grand Grounds Garden

Dai, Yang

13

Active vapor split control for dividing-wall columns Journal: Industrial & Engineering Chemistry Research  

E-Print Network [OSTI]

@ntnu.no Abstract Dividing-wall distillation columns offer large potential energy savings over conventional column column Introduction Dividing-wall distillation columns such as Petlyuk arrangements and the Kaibel column vapor fraction Purities (mol %): 97.6 % (D), 97.3 % (S); 99.6 % (B) Stages: 40 in prefractionator and 80

Skogestad, Sigurd

14

Contracting Around Hall Street  

E-Print Network [OSTI]

This Article examines the extent to which expanded court review of arbitration awards remains available after the Supreme Courtís decision in Hall Street Associates, L.L.C. v. Mattel, Inc. - that is, whether parties can contract around Hall Street...

Drahozal, Christopher R.

2010-01-01T23:59:59.000Z

15

Nassau Street Dark shading  

E-Print Network [OSTI]

Nassau Street Dark shading indicates shelving for oversize books E Emergency exit Men Women M C-18L C-19L C-19 M-2 C-19 M-1 JAN Library Web Computers Library Seminar Room Resource Sharing

Petta, Jason

16

Location Name Street Number Street Name 9, 11 Brainerd Avenue  

E-Print Network [OSTI]

Avenue 49 Brainerd Avenue 55 A, B Brainerd Avenue Broad Street Books 45 Broad Street Parking Lot T CFA Drive Foss 6 - Nicolsen (Film House) 57 Foss Hill Drive Foss 7 - Nicolsen (French House) 57 Foss Hill

Royer, Dana

17

DOE Street Lighting Consortium Releases Results of Public Street...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solid-State Street Lighting Consortium (MSSLC) has released the results of a voluntary web-based inventory survey of public street and area lighting across the U.S., conducted...

18

Green Streets Initiative Urban greening projects in Manchester, Trafford and Salford  

E-Print Network [OSTI]

Green Streets Initiative Urban greening projects in Manchester, Trafford and Salford objectives Green Streets has captured the imagination of communities throughout Manchester, Trafford and Salford. The projects have not only improved their environment by planting trees, or greening walls and gable ends

19

Successful streets : performance measures, community engagement, and urban street design  

E-Print Network [OSTI]

Over the past decade, local transportation agencies have increasingly re-designed urban arterials, their cities' major surface streets, to better accommodate a wide range of users. At the same time, a growing number of ...

Steinemann, Jeremy R

2012-01-01T23:59:59.000Z

20

Seismic design, testing and analysis of reinforced concrete wall buildings  

E-Print Network [OSTI]

of Slender Reinforced Concrete WallsĒ. Structural Journal,T. (1975). ďReinforced Concrete StructuresĒ. John Wiley &Design of Reinforced Concrete and Masonry BuildingsĒ. John

Panagiotou, Marios

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Revolutionary Urbanism: The Struggle for the Streets of Caracas  

E-Print Network [OSTI]

and the stories of street vendors to understand the materialother, control the movement of vendors, and most importantlyits subjects the street vendors who operate on the streets

Rojas, Carmen

2010-01-01T23:59:59.000Z

22

Incorporating video into Google Mobile Street View  

E-Print Network [OSTI]

Mobile Street View is a compelling application but suffers from significant latency problems, especially in limited bandwidth circumstances. Currently, the application uses static images to display street level information. ...

Wright, Christina (Christina E.)

2010-01-01T23:59:59.000Z

23

Considering LEDs for Street and Area Lighting  

Broader source: Energy.gov [DOE]

View Jim Brodrick's keynote video from the September 2009 IES Street and Area Lighting Conference in Philadelphia.

24

OxfordRoadOxfordRoadOxfordRoad UpperBrookStreetUpperBrookStreet  

E-Print Network [OSTI]

West Whitworth Street Fairfield Street Charles Street Charles St Altrincham Street Mancunian Way St OXFORD RD STATION OXFORD RD STATION PICCADILLY TRAIN STATION AND METROLINK BBC CITY CENTRE, Platt Church of England 47. Platt Fields Park, open space with a lake. 48. Allen Hall 49. The Islah

25

Liberty School 601 Filbert Street  

E-Print Network [OSTI]

Liberty School 601 Filbert Street Pittsburgh, PA 15232 Shady Lane 100 North Braddock Pittsburgh, PA 15208 UCDC 635 Clyde St. Pittsburgh, PA 15260 Community Day School 6424 Forward Ave Pittsburgh, PA 15217 East Hills Elementary 2250 Centre Ave. Pittsburgh, PA 15219 Ellis School 6425 Fifth Avenue Pittsburgh

26

Municipal Consortium LED Street Lighting Workshop Presentations...  

Broader source: Energy.gov (indexed) [DOE]

A Rational View of LM-79 Reports, IES Files, and Product Variation Gary Steinberg, GE Lighting Solutions Solid-State Street Lighting: Calculating Light Loss Factors Dana Beckwith,...

27

State Street Corporation: Evolving IT Governance  

E-Print Network [OSTI]

State Street, a world leader in financial services, has more than 20 entrepreneurial business units which continually identify customer needs and create new products and ...

Weill, Peter

2003-02-20T23:59:59.000Z

28

Municipal Consortium LED Street Lighting Workshop Presentations...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Controls Norma Isahakian, City of Los Angeles Bureau of Street Lighting San Jose's "Smart" LED Streetlights: Controlled Amy Olay, City of San Jose Adaptive Lighting Controls...

29

LED Street Lighting Conversion Workshop Presentations  

Broader source: Energy.gov [DOE]

This page provides links to the presentations given at the National League of Cities Mobile Workshop, LED Street Lighting Conversion: Saving Your Community Money, While Improving Public Safety,...

30

South Parking Garage SAN SALVADOR STREET  

E-Print Network [OSTI]

FOB YUH SPXC SPXE West Parking Garage DH South Parking Garage UPD MQH SH SAN SALVADOR STREET SAN Salvador Street · Once you enter, if you are Disabled, proceed to park in the Disabled parking area Salvador St. · Proceed to the West Garage (4th St.) entrance on right hand side · Once you enter, if you

Su, Xiao

31

Cleaning up the Streets of Denver  

SciTech Connect (OSTI)

Between 1913 and 1924, several Denver area facilities extracted radium from carnotite ore mined from the Paradox basin region of Colorado. Tailings or abandoned ores from these facilities were apparently incorporated into asphalt used to pave approximately 7.2 kilometers (4.5 miles) of streets in Denver. A majority of the streets are located in residential areas. The radionuclides are bound within the asphalt matrix and pose minimal risk unless they are disturbed. The City and County of Denver (CCoD) is responsible for controlling repairs and maintenance on these impacted streets. Since 2002, the CCoD has embarked on a significant capital improvement project to remove the impacted asphalt for secure disposal followed by street reconstruction. To date, Parsons has removed approximately 55 percent of the impacted asphalt. This paper discusses the history of the Denver Radium Streets and summarizes on-going project efforts. (authors)

Stegen, R.L.; Wood, T.R.; Hackett, J.R. [Parsons, 1700 Broadway, Suite 900, Denver, Colorado 80290 (United States); Sogue, A. [City and County of Denver, 201 West Colfax, Denver, Colorado 80202 (United States)

2006-07-01T23:59:59.000Z

32

Demonstration of LED Street Lighting  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--

33

Demonstration Assessment of Light Emitting Diode (LED) Street...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report Demonstration Assessment of Light Emitting Diode (LED) Street Lighting, Final Report This...

34

The Global Health Group 50 Beale Street, Suite 1200  

E-Print Network [OSTI]

The Global Health Group 50 Beale Street, Suite 1200 San Francisco, CA 94105, USA tel: 415 Global Health Group Offices, 50 Beale Street, San Francisco, CA. Contact

Klein, Ophir

35

Journal of Manufacturing Processes 14 (2012) 416424 Contents lists available at SciVerse ScienceDirect  

E-Print Network [OSTI]

Journal of Manufacturing Processes 14 (2012) 416­424 Contents lists available at SciVerse ScienceDirect Journal of Manufacturing Processes journal homepage: www.elsevier.com/locate/manpro Technical paper of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 1206 W. Green Street, MC-244

Rogers, John A.

36

University College London Gower Street  

E-Print Network [OSTI]

's Committee on the Ethics of Non- NHS Human Research. Please read through this information sheet and feel free about one hour. You will be using a Cave-like virtual environment system called the ReaCTor (see the figure below). The ReaCTor is a virtual environment system made up of 3 walls measuring roughly 3m x 3m x

Slater, Mel

37

Madhav Prasad Bhattarai Livelihood strategies of the street vendors  

E-Print Network [OSTI]

Madhav Prasad Bhattarai Livelihood strategies of the street vendors Livelihood strategies of the street vendors A comparative study of mobile and static vendors in Kathmandu metropolis Summary This study has been made among the street vendors of KM who are using the street public space and pavement

Richner, Heinz

38

July 18, 2012 Using QECBs for Street Lighting Upgrades  

E-Print Network [OSTI]

lighting technologies (e.g. light-emitting diodes, induction lighting) can reduce street light energy

39

JOURNAL ut PHYSIQUE Colloque C7, supplement au n 12, Tome 38, decembre 1977, page C7-51 A MICROSCOPIC THEORY FOR DOMAIN WALL MOTION  

E-Print Network [OSTI]

the fact that the order parameter r\\ is not a conserved quantity. If the free energy is not at a minimum KINETICS J. W. CAHN Institute for Materials Research, National Bureau of Standards, Washington, D.C. 20234 to mean curvature. Unlike previous models, the velocity is not proportional to domain wall free energy

Paris-Sud XI, Université de

40

Complete drawing prototypes for urban complete streets  

E-Print Network [OSTI]

A study was performed to determine how drawings for streets may be tailored to a broad range of viewers and agendas, yet still be viewed as a credible design tool for architects. With a growing number of cities designing ...

Winder, James Ira

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Case Study No. 1: Alvarado Street Bakery  

E-Print Network [OSTI]

bread, they The Innovative Business Models Case Study Seriest find in any C-Corp business model. Alvarado Street Bakeryíon the Innovative Business Models Case Study Series, please

Thistlethwaite, Rebecca; Brown, Martha

2010-01-01T23:59:59.000Z

42

The Macmillan Building 4 Crinan Street  

E-Print Network [OSTI]

The Macmillan Building 4 Crinan Street London N1 9XW, UK Tel: +44 (0) 20 7833 4000 e-mail: nature microRNAs B. R. Cullen 426 The promises and pitfalls of RNA-interference-based therapeutics D

Cai, Long

43

140 St. George Street Toronto, Ontario  

E-Print Network [OSTI]

140 St. George Street Toronto, Ontario M5S 3G6 www.ischool.utoronto.ca BURSARY APPLICATION/COMMON LAW/FAMILY, ETC.? EXPLAIN: ARE YOU CURRENTLY EMPLOYED? YES NO NUMBER OF HOURS PER WEEK GROSS SALARY

Toronto, University of

44

Building, block, street : residential block design  

E-Print Network [OSTI]

Late twentieth-century housing, formed by economic and internally generated functional problems rather than by limitations imposed by traditional street pattern and block size, is fundamentally anti-urban. Modern American ...

Kamell, Elizabeth N. (Elizabeth Natanya)

1996-01-01T23:59:59.000Z

45

Main Street Loan Program (North Dakota)  

Broader source: Energy.gov [DOE]

The Main Street Loan Program loans of up to $24,999 through the Certified Development Corporation (CDC) in participation with local lenders or economic development organizations for small...

46

The Ecological Street Tree: Mainstreaming the Production of Street Tree-based Ecosystem Services in Northern California Cities, 1980-2008  

E-Print Network [OSTI]

Alethea Harper, Jeff Williams, and Jason A. Hayter, ďStreetAlethea Harper, Jeff Williams, and Jason A. Hayter. ďStreet

Seamans, Georgia Norma Silvera

2010-01-01T23:59:59.000Z

47

STALL STREET JOURNAL [A WEEKLY DOSE OF KNOWLEDGE  

E-Print Network [OSTI]

bottles, and plastic tubs or jars are not microwave safe. Check for a symbol indicating it is before using veggies. Follow these tips to prevent fires--and burned food. 1. Most plastic take-out containers, water, and heavy plastic wrap 3. Vent plastic wrap to allow steam to escape. 4. Always use oven mitts or a thick

Mahon, Bradford Z.

48

The National Science Bowl Students are Here! (The Streets of...  

Broader source: Energy.gov (indexed) [DOE]

The National Science Bowl Students are Here (The Streets of D.C. Just Got a Little Smarter.) The National Science Bowl Students are Here (The Streets of D.C. Just Got a Little...

49

How Energy Efficiency is "Lighting Up" the Streets of Philadelphia...  

Broader source: Energy.gov (indexed) [DOE]

How Energy Efficiency is "Lighting Up" the Streets of Philadelphia How Energy Efficiency is "Lighting Up" the Streets of Philadelphia April 6, 2011 - 11:01am Addthis Andy Oare Andy...

50

37th World Energy Engineering Congress / Featuring GreenStreet...  

Broader source: Energy.gov (indexed) [DOE]

Congress Featuring GreenStreet 37th World Energy Engineering Congress Featuring GreenStreet October 1, 2014 2:00PM EDT to October 2, 2014 10:00PM EDT Washington, DC http:...

51

Spatial stratification of street vendors in downtown Mexico City  

E-Print Network [OSTI]

The fight for space between city administrators and street vendors working in city centers is one of the major controversies about street commerce. Trying to renew and upgrade their downtowns, city administrators of most ...

Baroni, Bruno Nazim

2007-01-01T23:59:59.000Z

52

Text-Alternative Version: Evaluating LED Street Lighting Solutions  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the Evaluating LED Street Lighting Solutions webcast, held July 20, 2010.

53

Pittsburgh LED Street Lighting Research Project Performance Criteria  

Broader source: Energy.gov [DOE]

A Pittsburgh LED Street Lighting Research Project document on Technical and Aesthetic Performance for Business District LED Lighting.

54

Mail Stop 084 (781) 736-8787 415 South Street (781) 736-3420 Fax  

E-Print Network [OSTI]

on South Street towards Brandeis/Roberts MBTA Station. Make your first left onto Old South Street (One Way

Fraden, Seth

55

Category 1: World's best journals Journal of Banking and Finance  

E-Print Network [OSTI]

Category 1: World's best journals Journal of Banking and Finance Journal of Finance Journal: Leading specialist journals Financial Analysts Journal Financial Management Journal of Business Finance and Accounting Journal of Empirical Finance Journal of Financial Econometrics Journal of Financial Education

Zhang, Zhengjun

56

Solar street lights help revitalize downtown  

SciTech Connect (OSTI)

This article examines the socio-economic effects of solar powered street lights in Hampton, New Hampshire. This was a community project as part of a downtown revitalization effort designed to be done on a limited budget, be highly visible, attract both financial and technical support from a wide variety of local businesses and individuals and fit in with broader, long-term plans to improve the look and desirability of downtown Hampton.

Not Available

1994-02-01T23:59:59.000Z

57

Wall to Wall Optimal Transport  

E-Print Network [OSTI]

The calculus of variations is employed to find steady divergence-free velocity fields that maximize transport of a tracer between two parallel walls held at fixed concentration for one of two constraints on flow strength: a fixed value of the kinetic energy or a fixed value of the enstrophy. The optimizing flows consist of an array of (convection) cells of a particular aspect ratio Gamma. We solve the nonlinear Euler-Lagrange equations analytically for weak flows and numerically (and via matched asymptotic analysis in the fixed energy case) for strong flows. We report the results in terms of the Nusselt number Nu, a dimensionless measure of the tracer transport, as a function of the Peclet number Pe, a dimensionless measure of the energy or enstrophy of the flow. For both constraints the maximum transport Nu_{MAX}(Pe) is realized in cells of decreasing aspect ratio Gamma_{opt}(Pe) as Pe increases. For the fixed energy problem, Nu_{MAX} \\sim Pe and Gamma_{opt} \\sim Pe^{-1/2}, while for the fixed enstrophy scenario, Nu_{MAX} \\sim Pe^{10/17} and Gamma_{opt} \\sim Pe^{-0.36}. We also interpret our results in the context of certain buoyancy-driven Rayleigh-Benard convection problems that satisfy one of the two intensity constraints, enabling us to investigate how the transport scalings compare with upper bounds on Nu expressed as a function of the Rayleigh number \\Ra. For steady convection in porous media, corresponding to the fixed energy problem, we find Nu_{MAX} \\sim \\Ra and Gamma_{opt} \\sim Ra^{-1/2}$, while for steady convection in a pure fluid layer between free-slip isothermal walls, corresponding to fixed enstrophy transport, Nu_{MAX} \\sim Ra^{5/12} and Gamma_{opt} \\sim Ra^{-1/4}.

Pedram Hassanzadeh; Gregory P. Chini; Charles R. Doering

2014-04-14T23:59:59.000Z

58

Email Article Print Article  

E-Print Network [OSTI]

/27/10 Huffington Post: "Fracking" could release uranium while drilling for natural gas 10/26/10 Wall Street Journal

Yan, Zhen

59

Electric, Street Railway, and Gas Corporations (South Dakota)  

Broader source: Energy.gov [DOE]

This legislation contains provisions pertaining to a corporation formed for the purpose of constructing, maintaining and operating a street railway or railways; generating, transmitting or...

60

Different Ways of Thinking about Street Networks and Spatial Analysis  

E-Print Network [OSTI]

Street networks, as one of the oldest infrastructures of transport in the world, play a significant role in modernization, sustainable development, and human daily activities in both ancient and modern times. Although street networks have been well studied in a variety of engineering and scientific disciplines, including for instance transport, geography, urban planning, economics, and even physics, our understanding of street networks in terms of their structure and dynamics remains limited, especially when dealing with such real-world problems as traffic jams, pollution, and human evacuations for disaster management. One goal of this special issue is to promote different ways of thinking about understanding street networks, and of conducting spatial analysis.

Jiang, Bin

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Illegibility, Uncertainty and the Management of Street Vending in New York City  

E-Print Network [OSTI]

Manhattanís 14th Street Vendors Market: An Analysis of thecity government and street vendors over the right to andinterests still view street vendors as a nuisance, vendors

Devlin, Ryan

2006-01-01T23:59:59.000Z

62

Municipal Consortium LED Street Lighting Workshop: April 19Ė20, Los Angeles, CA  

Broader source: Energy.gov [DOE]

Workshop Location: The Sheraton Los Angeles Downtown Hotel, 711 Hope Street, Los Angeles, CA 90017City Partner: City of Los Angeles Bureau of Street LightingCost: $175

63

CHP at Post Street in Downtown Seattle  

SciTech Connect (OSTI)

The Post Street project had four (4), 7.960 MW, Solar Taurus-70-10801S natural gas combustion turbines. Each turbine equipped with a 40,000 lb/hr heat recovery steam generator (HRSG). The dual-fuel HRSGs was capable of generating steam using gas turbine exhaust heat or surplus electric power. The generation capacity was nominally rated at 29.2 MW. The project as proposed had a fuel rate chargeable to power of 4,900 - 5,880 Btu/kWh dependent on time of year. The CHP plant, when operating at 29.2 MW, can recycle turbine exhaust into supply 145 kpph of steam to SSC per hour. The actual SSC steam loads will vary based on weather, building occupation, plus additions / reductions of customer load served. SSC produces up to 80 kpph of steam from a biomass boiler, which is currently base loaded all year.

Gent, Stan

2012-04-12T23:59:59.000Z

64

Open-air preaching as radical street performance†  

E-Print Network [OSTI]

In this thesis I examine the ways in which analysing open-air preaching as Ďradical street performanceí can inform our understanding of this expression of Christian preaching. Open-air preaching is commonly associated ...

Blythe, Stuart McLeod

2009-11-26T23:59:59.000Z

65

Street media : ambient messages in an urban space  

E-Print Network [OSTI]

Ambient street media are the media of our everyday lives in cities. Manifested in bits and fragments on the surfaces of the streetscape, these media often escape our notice - tuned out as visual clutter or dismissed as ...

Murthy, Rekha (Rekha S.)

2005-01-01T23:59:59.000Z

66

TATANYA KLASS 1575 Harper Street 4129 Cheasty Blvd. S.  

E-Print Network [OSTI]

TATANYA KLASS 1575 Harper Street 4129 Cheasty Blvd. S. Santa Cruz CA 95062 Seattle WA 98108 (831)421-1071 washing and maintain cleanliness of labs. 9/08-12/08 Research Papers & Posters 12/09 UNIVERSITY

Paytan, Adina

67

Street and Parking Facility Lighting Retrofit Financial Analysis Tool Webinar  

Broader source: Energy.gov [DOE]

DOE will present a live webinar titled "Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool" on Thursday, August 22, from 1:00 p.m. to 2:00 p.m. Eastern Daylight Time....

68

Municipal Solid-State Street Lighting Consortium Kickoff Webcast  

Broader source: Energy.gov [DOE]

This May 6, 2010 webcast served as the first official meeting of the new DOE Municipal Solid-State Street Lighting Consortium. Ed Smalley of Seattle City Light and Bruce Kinzey of Pacific Northwest...

69

Street Trees, Overhead Utlitly Distribution, and Physical Infrastructure  

E-Print Network [OSTI]

Street Trees, Overhead Utlitly Distribution, and Physical Infrastructure: Design Implictions of overhead lines for electric transmission to the customer is common in most communities, and is most likely and mission Research and Responsibilities Design considerations Ecological Considerations Budgeting

Schweik, Charles M.

70

Using QECBs for Street Lighting Upgrades: Lighting the Way to...  

Broader source: Energy.gov (indexed) [DOE]

Summarizes how the City of San Diego leveraged 13.1 million in qualified energy conservation bonds to increase the size of a street lighting upgrade project. Author: Lawrence...

71

The Recovery Act is "Lighting Up" the streets of Philadelphia  

Broader source: Energy.gov [DOE]

The Philadelphia Streets Department is converting 58,000 yellow and green traffic signals and will replace approximately 27,000 red LED lights that have come to the end of their useful life. The...

72

The Global Health Group 50 Beale Street, Suite 1200  

E-Print Network [OSTI]

The Global Health Group 50 Beale Street, Suite 1200 San Francisco, CA 94105, USA tel: 415 ­ May 2014, with the possibility of extension. Location: UCSF Global Health Group Offices, 50 Beale

Derisi, Joseph

73

Reform or Radicalism: Left Social Movements from the Battle of Seattle to Occupy Wall Street  

E-Print Network [OSTI]

39 According to David Graeber NYABC had a diversity ofSocialist organizations. See Graeber, ďWhat Did We Actuallyenabling a Anarchist David Graeber is oft-credited with the

Rowe, James K; Carroll, Myles

2014-01-01T23:59:59.000Z

74

Faculty/Staff/Lecturers Directory 200 W. Kwili Street  

E-Print Network [OSTI]

#12;2013-2014 Faculty/Staff/Lecturers Directory 200 W. Käwili Street Hilo, HI 96720-4091 The Staff Directory is a publication of the HawCC Chancellor's Office UH Center at West Hawai`i 81-964 Haleki`i Street Kealakekua, HI 96750 Imi PonoSTRIVE FOR EXCELLENCE E` #12;3 2013-2014 HawCC STAFF DIRECTORY Building Numbers

75

The Ecological Street Tree: Mainstreaming the Production of Street Tree-based Ecosystem Services in Northern California Cities, 1980-2008  

E-Print Network [OSTI]

in the city. Sub-populations of Palo Altoís street tree104 Palo Altoís publicly owned tree population (street andThe City of Palo Alto is endowed with a large population of

Seamans, Georgia Norma Silvera

2010-01-01T23:59:59.000Z

76

Liquid Wall Chambers  

SciTech Connect (OSTI)

The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

Meier, W R

2011-02-24T23:59:59.000Z

77

Webs of Walls  

E-Print Network [OSTI]

Webs of domain walls are constructed as 1/4 BPS states in d=4, N=2 supersymmetric U(Nc) gauge theories with Nf hypermultiplets in the fundamental representation. Web of walls can contain any numbers of external legs and loops like (p,q) string/5-brane webs. We find the moduli space M of a 1/4 BPS equation for wall webs to be the complex Grassmann manifold. When moduli spaces of 1/2 BPS states (parallel walls) and the vacua are removed from M, the non-compact moduli space of genuine 1/4 BPS wall webs is obtained. All the solutions are obtained explicitly and exactly in the strong gauge coupling limit. In the case of Abelian gauge theory, we work out the correspondence between configurations of wall web and the moduli space CP^{Nf-1}.

Minoru Eto; Youichi Isozumi; Muneto Nitta; Keisuke Ohashi; Norisuke Sakai

2005-06-20T23:59:59.000Z

78

Tokamak reactor first wall  

DOE Patents [OSTI]

This invention relates to an improved first wall construction for a tokamak fusion reactor vessel, or other vessels subjected to similar pressure and thermal stresses.

Creedon, R.L.; Levine, H.E.; Wong, C.; Battaglia, J.

1984-11-20T23:59:59.000Z

79

Great Wall Starbucks  

E-Print Network [OSTI]

along the Great Wall. When you think about it, it's not a bad marketing strategy: the Wall is high, the stairs relentless; what better than an espresso to energize you for the steep climb up? On second thought, make that a double. #ceas #china #tsutsui...

Hacker, Randi; Gatewood, Tyler; Tsutsui, William

2006-03-29T23:59:59.000Z

80

DOE Municipal Solid-State Street Lighting Consortium  

Broader source: Energy.gov [DOE]

The DOE Municipal Solid-State Street Lighting Consortium shares technical information and experiences related to LED street and area lighting demonstrations and serves as an objective resource for evaluating new products on the market intended for those applications. Cities, power providers, and others who invest in street and area lighting are invited to join the Consortium and share their experiences. The goal is to build a repository of valuable field experience and data that will significantly accelerate the learning curve for buying and implementing high-quality, energy-efficient LED lighting. Consortium members are part of an international knowledge base and peer group, receive updates on Consortium tools and resources, receive the Consortium E-Newsletter, and help steer the work of the Consortium by participating on a committee. Learn more about the Consortium.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Member Case Studies: LED Street Lighting Programs in Algona (IA), Asheville (NC), and Boston (MA)  

Broader source: Energy.gov [DOE]

This May 8, 2013 webcast featured presentations from DOE Municipal Solid-State Street Lighting Consortium member cities about their experiences with LED street lighting. Presenters John Bilsten of...

82

Text-Alternative Version: Keynote Video from Street and Area Lighting Conference  

Broader source: Energy.gov [DOE]

Following is a text version of Jim Brodrick's keynote video from the recent Street and Area Lighting Conference.

83

Journal of Theoretical Biology 236 (2005) 216227 On realizing shapes in the theory of RNA neutral networks  

E-Print Network [OSTI]

switch; NP-completeness; Neutral network; Nussinov­Jacobson energy model 1. Introduction As determinedJournal of Theoretical Biology 236 (2005) 216­227 On realizing shapes in the theory of RNA neutral, The University of Liverpool, Chadwick Building, Peach Street, Liverpool L69 7ZF, UK c School of Computer Science

Clote, Peter

84

Forthcoming in the inaugural issue of Journal of Chinese Economic and Business Studies China's Economic Growth After WTO Membership  

E-Print Network [OSTI]

Forthcoming in the inaugural issue of Journal of Chinese Economic and Business Studies China's Economic Growth After WTO Membership Jeffrey D. Sachs Earth Institute, Columbia University 405 Low Library, MC 4335 535 West 116th Street New York, NY 10027 sachs@columbia.edu and Wing Thye Woo Economics

85

1254 Chestnut Street Newton, MA 02464-1418  

E-Print Network [OSTI]

1254 Chestnut Street Newton, MA 02464-1418 Tel: (617) 965-5511 Fax: (617) 965-5818 MATERIAL SAFETY DATA SHEET PAGE 1 26 June 2001 SECTION 1. CHEMICAL IDENTIFICATION: No positive response for several tested salmonella strains. CARCINOGENICITY: Not listed in NTP, IARC, or OSHA

Rubloff, Gary W.

86

Travel directions to the Sterrekundig Instituut Utrecht (SIU) Street Address  

E-Print Network [OSTI]

Travel directions to the Sterrekundig Instituut Utrecht (SIU) Street Address Sterrekundig Instituut Utrecht Buijs Ballotlaboratorium Princetonplein 5 De Uithof Utrecht Telephone: 030­2535200 within Holland, a grocery store ("food market"), a large 24-hour Burger King, etc. Buy a paper railroad ticket to Utrecht

Rutten, Rob

87

Soney Pandey Livelihood strategy of the street food vendor in Kathmandu City  

E-Print Network [OSTI]

Soney Pandey Livelihood strategy of the street food vendor in Kathmandu City Livelihood of the street food vendor in Kathmandu City A case study in Jawalakhel, Gongabu and New Road Area Summary The study carried out on the "Livelihood of the Street Food Vendor" in Kathmandu is based on the primary

Richner, Heinz

88

Thermal treatment wall  

DOE Patents [OSTI]

A thermal treatment wall emplaced to perform in-situ destruction of contaminants in groundwater. Thermal destruction of specific contaminants occurs by hydrous pyrolysis/oxidation at temperatures achievable by existing thermal remediation techniques (electrical heating or steam injection) in the presence of oxygen or soil mineral oxidants, such as MnO.sub.2. The thermal treatment wall can be installed in a variety of configurations depending on the specific objectives, and can be used for groundwater cleanup, wherein in-situ destruction of contaminants is carried out rather than extracting contaminated fluids to the surface, where they are to be cleaned. In addition, the thermal treatment wall can be used for both plume interdiction and near-wellhead in-situ groundwater treatment. Thus, this technique can be utilized for a variety of groundwater contamination problems.

Aines, Roger D. (Livermore, CA); Newmark, Robin L. (Livermore, CA); Knauss, Kevin G. (Livermore, CA)

2000-01-01T23:59:59.000Z

89

Professor, Head of the School, Civil Engineering, Queensland University of Technology, 2 George Street,13 Brisbane 4000 Australia.  

E-Print Network [OSTI]

Street,13 Brisbane 4000 Australia. Professor, Institute for Transportation, Faculty of Civil Engineering

Bertini, Robert L.

90

The Manually Annotated Sub-Corpus: A Community Resource For and By the People  

E-Print Network [OSTI]

of Computer Science Vassar College Poughkeepsie, NY, USA ide@cs.vassar.edu Collin Baker International Computer Street Journal corpus known as the Penn Treebank (Mar- cus et al., 1993), which over the years has been". However, like the Wall Street Journal corpus, OntoNotes is limited in the range of genres it includes

Ide, Nancy

91

Single-Walle 4. Single-Walled Carbon Nanotubes  

E-Print Network [OSTI]

applications, carbon nanotube research is ac- tively being pursued in diverse areas including energy storage105 Single-Walle 4. Single-Walled Carbon Nanotubes Sebastien Nanot, Nicholas A. Thompson, Ji Single-walled carbon nanotubes (SWCNTs) are hol- low, long cylinders with extremely large aspect ratios

Kono, Junichiro

92

High-R Walls for Remodeling: Wall Cavity Moisture Monitoring  

SciTech Connect (OSTI)

The focus of the study is on the performance of wall systems, and in particular, the moisture characteristics inside the wall cavity and in the wood sheathing. Furthermore, while this research will initially address new home construction, the goal is to address potential moisture issues in wall cavities of existing homes when insulation and air sealing improvements are made.

Wiehagen, J.; Kochkin, V.

2012-12-01T23:59:59.000Z

93

"Help me!" and "Leave me alone!" The Pregnancy Experiences of Telegraph "Street Kids"  

E-Print Network [OSTI]

lot of these street parents who lost their kids because theya child. Most of the parents who had lost children have lost

Smid, Marcela C

2006-01-01T23:59:59.000Z

94

Name * First Last Address Street Address Address Line 2 City State ...  

E-Print Network [OSTI]

Name * First Last; Address. Street Address Address Line 2. City State / Province / Region Postal / Zip Code. United States, United Kingdom, Australia, Canada†...

95

Text-Alternative Version: MSSLC Member Case Studies- LED Street Lighting Programs Webinar  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "MSSLC Member Case Studies - LED Street Lighting Programs" webcast, held May 8, 2013.

96

Electric, Gas, Water, Heating, Refrigeration, and Street Railways Facilities and Service (South Dakota)  

Broader source: Energy.gov [DOE]

This legislation contains provisions for facilities and service related to electricity, natural gas, water, heating, refrigeration, and street railways. The chapter addresses the construction and...

97

Gas, Heat, Water, Sewerage Collection and Disposal, and Street Railway Companies (South Carolina)  

Broader source: Energy.gov [DOE]

This legislation applies to public utilities and entities furnishing natural gas, heat, water, sewerage, and street railway services to the public. The legislation addresses rates and services,...

98

Text-Alternative Version: Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool" webcast, held August 22, 2013.

99

Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool Webcast  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the "Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool" webcast, held April 3, 2012.

100

Text-Alternative Version: Municipal Solid-State Street Lighting Consortium Kickoff  

Broader source: Energy.gov [DOE]

Below is the text-alternative version of the Municipal Solid-State Street Lighting Consortium Kickoff webcast, held May 6, 2010.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

FirstEnergy (Potomac Edison)- Municipal and Street Lighting Program (Maryland)  

Broader source: Energy.gov [DOE]

FirstEnergy offers several incentives for non-residential and municipal customers to upgrade traffic signals, pedestrian signals, street lights to more efficient fixtures. The Municipal Lighting...

102

The Recovery Act is "Lighting Up" the streets of Philadelphia  

ScienceCinema (OSTI)

The Philadelphia Streets Department is converting 58,000 yellow and green traffic signals and will replace approximately 27,000 red LED lights that have come to the end of their useful life. The project will use approximately $3 million in EECBG funds, matched with $3 million in PECO funding, and will save the city approximately $1 million in electric costs each year. For more information on Recovery Act projects funded by the Department of Energy in Pennsylvania: http://www.energy.gov/recovery/pa.htm

Nutter, Michael; Gajewski, Katherine; Russell, Toby; Williams, Doug; Best, DeLain;

2013-05-29T23:59:59.000Z

103

The Recovery Act is "Lighting Up" the streets of Philadelphia  

SciTech Connect (OSTI)

The Philadelphia Streets Department is converting 58,000 yellow and green traffic signals and will replace approximately 27,000 red LED lights that have come to the end of their useful life. The project will use approximately $3 million in EECBG funds, matched with $3 million in PECO funding, and will save the city approximately $1 million in electric costs each year. For more information on Recovery Act projects funded by the Department of Energy in Pennsylvania: http://www.energy.gov/recovery/pa.htm

Nutter, Michael; Gajewski, Katherine; Russell, Toby; Williams, Doug; Best, DeLain

2010-01-01T23:59:59.000Z

104

Covering Walls With Fabrics.  

E-Print Network [OSTI]

the glue a dull surface to adhere to. Fill any gouges or nail holes with patching plaster and sand smooth after they have dried thoroughly. Minor ripples can be covered with spackling compound, a plaster-like substance that is spread thinly... during dry weather and in a well-ventilated room. Cut each panel 3 inches longer than the ceiling height. Match and cut sufficient fabric widths to cover completely one wall at a time. Start with Corner I nstall the first fabric panel so...

Anonymous,

1979-01-01T23:59:59.000Z

105

The marginal cost of carbon abatement from planting street trees in New York City  

E-Print Network [OSTI]

to offset carbon emissions because the carbon storage attributed to U.S. cities is estimated at 10Analysis The marginal cost of carbon abatement from planting street trees in New York City Kent F Accepted 11 August 2013 Available online xxxx Keywords: Cost-effectiveness Carbon Street trees New York

Fried, Jeremy S.

106

Indra Prasad Paneru Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu Valley  

E-Print Network [OSTI]

Indra Prasad Paneru Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu Valley Livelihood strategy and occupational vulnerability of street ice cream vendors in Kathmandu-cream vendors of Kathmandu valley, Case study of Jawalakhel, Ratnapark area and Balaju area' explores

Richner, Heinz

107

Estimating amenity values of street trees and woodland views: a methodological review  

E-Print Network [OSTI]

of spatial valuation methods. The review revealed a paucity of nationwide or large-scale valuations of street, and on trade-offs and synergies in ecosystem service provision. Objectives This research aimed to: m review methods and approaches to valuing amenity street trees and woodland views ≠ and greenspace generally

108

Custodial & Landscape Services 101 West 12th Street Rolla, Missouri 65409-0270  

E-Print Network [OSTI]

Custodial & Landscape Services ­ 101 West 12th Street ­ Rolla, Missouri 65409-0270 Phone: 573 health without harming the environment" (Ashkin, July 2004 Cleaning and Maintenance Management) through health. #12;Custodial & Landscape Services ­ 101 West 12th Street ­ Rolla, Missouri 65409-0270 Phone: 573

Missouri-Rolla, University of

109

Building Codes for Classrooms 34MK 3401 Market Street JMHH Jon M. Huntsman Hall  

E-Print Network [OSTI]

Building Codes for Classrooms 34MK 3401 Market Street JMHH Jon M. Huntsman Hall 35MK 3550 Market Market Street KWH Kelly Writers House ACHM Anatomy/Chemistry Building L-FH Lauder-Fischer Hall ADDM Fisher-Bennett Hall LIPP Lippincott BLOC Blockley Hall LLAB Leidy Labs CAST Caster Building LRSM Lab

Plotkin, Joshua B.

110

An Exploration of the Relationship between Street Patterns and Floodplains in The Woodlands, Texas  

E-Print Network [OSTI]

form was designed around the hydrological system. This thesis will focus on one aspect of the city form, the street pattern, to determine the effectiveness of street designs' response to floodplains. Unlike the grid-like pattern advocated by the New...

Xu, Junping

2010-01-14T23:59:59.000Z

111

Supplementary radiological and beryllium characterization of the facility at 425 Peek Street, Schenectady, New York  

SciTech Connect (OSTI)

At the request of the Office of Naval Reactors through the Office of Remedial Action and Waste Technology, a radiological survey of the Peek Street industrial facility, the adjacent state-owned bike path, and two nearby residential properties was conducted by Oak Ridge National Laboratory (ORNL) in November 1989. The results indicated small isolated areas that exceeded DOE guidelines. These areas totaled approximately 0.2 m{sup 2} of floor area and approximately 3 m{sup 2} of wall area inside the building, and two small areas totaling approximately 5 m{sup 2} outside the building. A small section of one of these areas extended beyond the fence on the east side of the industrial property onto the state-owned property. No residual radioactive material or elevated radiation levels were detected on any portion of the paved section of the bike path or the residential properties adjacent to the site. Because the elevated radiation levels were localized and limited in extent, any credible use scenario, including current use conditions, indicated that no significant radiation exposures would accrue to individuals frequenting the area. Samples were also analyzed for elemental beryllium since that material had formerly been used at the site. In conjunction with the planned remediation at the facility, a supplementary characterization survey was performed to further define the areas containing beryllium in excess of the identified guidelines. Additional radiological characterization of Ra-226, Th-232, and U-238 was also performed in areas that were largely inaccessible prior to the remediation efforts.

Foley, R.D.; Allred, J.F.; Carrier, R.F.

1994-10-01T23:59:59.000Z

112

Security Walls, LLC WIPP 2009  

Broader source: Energy.gov (indexed) [DOE]

Walls, LLC Waste Isolation Pilot Plant Department of Energy Voluntary Protection Program Onsite Review March 3-4, 2009 The Department of Energy (DOE) Voluntary Protection Program...

113

Liquid Walls Innovative Concepts for First Walls and Blankets  

E-Print Network [OSTI]

with existing technology · Size of plasma devices and power plants can be substantially reduced High PoloidalLiquid Walls Innovative Concepts for First Walls and Blankets Mohamed Abdou Professor, Mechanical as part of the US Restructured Fusion Program Strategy to enhance innovation · Natural Questions

Abdou, Mohamed

114

Oven wall panel construction  

DOE Patents [OSTI]

An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

1980-04-22T23:59:59.000Z

115

Collaborative process and the transformation of the urban environment : wall, street, and scaffolding on Massachusetts Avenue in Boston  

E-Print Network [OSTI]

This thesis addresses two questions: how to develop a process of collaborative building in cities, and what kind of public places to make in cities. More generally: how can urban dwellers re-engage with urban architecture ...

Carr, James D. (James David)

1994-01-01T23:59:59.000Z

116

Journal of Applied Ecology 2005  

E-Print Network [OSTI]

, conservation behaviour, detection distance, ecotourism, flight initiation distance, recreation Journal

Fern√°ndez-Juricic, Esteban

117

What is at the end of the road? Understanding discontinuities of on-street bicycle lanes in urban settings  

E-Print Network [OSTI]

What is at the end of the road? Understanding discontinuities of on-street bicycle lanes in urban-street bicycle facilities is often mentioned as an important strategy to encourage increased bicycle safety and bicycle travel. However, little if any literature has focused on instances where separate on- street

Levinson, David M.

118

Optimization Journals, Sites, Societies  

E-Print Network [OSTI]

Optimization Online Links. Optimization related societies. Mathematical Optimization Society ∑ SIAM ∑ INFORMS. Optimization related journals. Mathematical†...

119

Product Sheet Wall Mount Lift  

E-Print Network [OSTI]

Product Sheet Wall Mount Lift Ergotronģ Neo-FlexTM 870-05-061, rev. 12/11/07 www. Less effort. Feel the difference. Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift! CF patented lift-and-pivot motion technology adjusts with a light touch. Raise

Saskatchewan, University of

120

Moisture Research - Optimizing Wall Assemblies  

SciTech Connect (OSTI)

The Consortium for Advanced Residential Buildings (CARB) evaluated several different configurations of wall assemblies to determine the accuracy of moisture modeling and make recommendations to ensure durable, efficient assemblies. WUFI and THERM were used to model the hygrothermal and heat transfer characteristics of these walls.

Arena, L.; Mantha, P.

2013-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Going Home Through an Unknown Street Christian Icking  

E-Print Network [OSTI]

. Secondly, we assume that the location of the goal is known to the robot. We prove a lower bound of 2 was supported by the DFG-Projects "Diskrete Probleme", No. Ot 64/8-2, and "Kompetitive Bahnplanung", No. Kl 655 system (robot) with a vision system can move freely inside a room with opaque walls, its aim is to find

López-Ortiz, Alex

122

Wall lizards display conspicuous signals to conspecifics and reduce detection by avian predators  

E-Print Network [OSTI]

were conducted in 497 relation to our predictions. 498 499 Among-island variation in avian predator vs. conspecific perception of P. erhardii 500 conspicuousness 501 Page 22 of 52Behavioral Ecology 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19... For Review Only Wall lizards display conspicuous signals to conspecifics and reduce detection by avian predators Journal: Behavioral Ecology Manuscript ID: BEHECO-2014-0135.R2 Manuscript Type: Original article Keywords...

Marshall, Kate L. A.; Stevens, Martin

2014-07-10T23:59:59.000Z

123

Hustling While You Wait: The Politics of Energy and the Deregulation of Natural Gas, 1938-1993  

E-Print Network [OSTI]

Street Journal August 4, 1972). Initially, these actions were not made public, 8 although exploration did increase substantially; natural gas production to reached a record-high level in 1973 (Rowe 1972b; Energy Information Administration 1999). When... statements from industry publications including Foster Natural Gas Report and Platt?s Oilgram Journal. I used national periodicals including The Wall Street Journal, New York Times, Washington Post, Forbes and Business Week to track the broader historical...

Walden, Rachel Nicole

2009-05-15T23:59:59.000Z

124

jou.rm.alnf ELSEVIER Journal of Nuclear Materials 241-243 (1997) 255-259  

E-Print Network [OSTI]

jou.rm.alnf HUMOr ELSEVIER Journal of Nuclear Materials 241-243 (1997) 255-259 Erosion lifetime at the side walls. 0022-3115/97/$17.00 Copyright © 1997 Elsevier Science B.V. All rights reserved. PII S0022-3!15(96)00510-7 #12;256 H.D. Pacher et al. / Journal of Nuclear Materials 241 243 (1997) 255 259 10~' ~10 4 1000 ~ _ 1

Raffray, A. René

125

Face to Face and Street to Street: An Exploration of the Benefits and Perils of Transnational Feminist Practices for Iranís One Million Signatures Campaign  

E-Print Network [OSTI]

Keddie & R. Matthee (Eds. ), Iran and the Surrounding World.Muslim Societies: The Cases of Iran and Azerbaijan. Journal2001). Women's Strategies in Iran from the 1979 Revolution

McKibben, Susan

2010-01-01T23:59:59.000Z

126

Designing Indian streets as social public spaces : contextual design and planning in Bangalore  

E-Print Network [OSTI]

Streets in India have traditionally been the public spaces around which social life has revolved. They constitute the urban public realm where people congregate, celebrate and interact. The hypothesis that forms the basis ...

Mandhan, Sneha

2014-01-01T23:59:59.000Z

127

Large-Eddy Simulation of Flow and Pollutant Transport in Urban Street Canyons with Ground Heating  

E-Print Network [OSTI]

Our study employed large-eddy simulation (LES) based on a one-equation subgrid-scale model to investigate the flow field and pollutant dispersion characteristics inside urban street canyons. Unstable thermal stratification ...

Li, Xian-Xiang

128

EECBG Success Story: Recovery Act is "Lighting Up" the Streets of Philadelphia  

Broader source: Energy.gov [DOE]

The Philadelphia Streets Department is converting 58,000 yellow and green traffic signals and will replace approximately 27,000 red LED lights that have come to the end of their useful life. Learn more.

129

The blame game : how colonial legacies in Hong Kong shape street vendor and public space policies  

E-Print Network [OSTI]

Hong Kong has seen several social movements emerge since 2003 that have focused on saving quotidian public spaces, such as traditional shopping streets and markets, from redevelopment. This thesis explores how the most ...

Cheng, Andrea Kyna Chiu-wai

2012-01-01T23:59:59.000Z

130

Revitalizing commercial streets in historical district : evaluating a case in Fuzhou, China  

E-Print Network [OSTI]

This thesis sets out to examine the case of commercial street revitalization in Fuzhou, China. In modern China the focus of revitalization models has evolved from poverty and environmental quality in 1980s to economic ...

Liu, Yang, M.C.P. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

131

Creating a branding image as an effective strategy to revitalize downtown commercial streets  

E-Print Network [OSTI]

The branding image of commercial streets can be an important factor for inviting new shops and attracting customers and visitors to the area. It can also contribute to changing the image of declining downtown shopping ...

Yamagishi, Kohichi

2008-01-01T23:59:59.000Z

132

Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool  

Broader source: Energy.gov [DOE]

This August 22, 2013 webinar provided a guided walk-through of the Street and Parking Facility Lighting Retrofit Financial Analysis Tool. Developed by a partnership of the DOE Municipal Solid-State...

133

Webcast: Municipal Solid-State Street Lighting Consortium Retrofit Financial Analysis Tool  

Broader source: Energy.gov [DOE]

This April 3, 2012 webcast presented information about the Retrofit Financial Analysis Tool developed by DOE"s Municipal Solid-State Street Lighting Consortium. Doug Elliott of Pacific Northwest...

134

Drawing the line : spatial street vendor management in Ho Chi Minh City  

E-Print Network [OSTI]

A lack of consensus exists among urban planners and government officials on what to do with the complex issue of informal street vending and sidewalk usage, with cities often turning to ineffective licensing or harmful ...

Sung, Courtney (Courtney A.)

2011-01-01T23:59:59.000Z

135

Egypt's Pop-Music Clashes and the "World-Crossing" Destinies of Muhammad Ali Street Musicians  

E-Print Network [OSTI]

1 Egypt's Pop-Music Clashes and the "World-Crossing" Destinies of Muhammad Ali Street Musicians all over Egypt and employ civil servants and musicians who perform and represent local musical

Paris-Sud XI, Université de

136

Walnut Street Sansom Street  

E-Print Network [OSTI]

of 1923 Ice Rink Hospital of the University of Pennsylvania Health System University Museum University

Sharp, Kim

137

Walnut Street Sansom Street  

E-Print Network [OSTI]

Hutchinson Gymnasium Ringe Squash Crt Levy Tennis Pavilion Class of 1923 Ice Rink Hospital of the University

Sharp, Kim

138

BEAUFAIN STREET WENTWORTH STREET  

E-Print Network [OSTI]

207PITTST. FACULTY/STAFF 24HOURS7DAYS/WEEK MM MOTORCYCLE-ST.PHILIP FACULTY/STAFF&STUDENT 24HOURS7DAYS/WEEK MP MOTORCYCLE-PPLOT FACULTY/STAFF&STUDENT 24HOURS7DAYS/WEEK MW MOTORCYCLE-CALHOUN FACULTY

Kunkle, Tom

139

Innovative Composite Wall System for Sheathing Masonry Walls  

SciTech Connect (OSTI)

Existing Housing - Much of the older multifamily housing stock in the United States includes units in structures with uninsulated masonry walls. Included in this stock are two- and three-story walk-up apartments, larger apartment complexes, and public housing (both high- rise and townhouse). This older multifamily housing has seen years of heavy use that may have left the plaster wall marred or damaged. Long- term building settlement or movement may have cracked the plaster, sometimes severely. Moisture from invented kitchens and baths may have caused condensation on uninsulated exterior walls. At best this condensation has left stains on the paint or wallpaper. At worst it has supported mold and mildew growth, fouling the air and creating unhealthy living conditions. Deteriorating plaster and flaking paint also result from wet walls. The presence of flaking, lead-based paint in older (pre-1978) housing is a major public health concern. Children can suffer permanent mental handicaps and psychological disorders if they are subjected to elevated levels of lead, while adults can suffer hypertension and other maladies. Studies have found that, in some urban communities with older housing stocks, over 35% of children tested have elevated blood lead levels (Hastings, et al.: 1997). Nationally, nearly 22% of black, non-hispanic children living in pre-1946 housing were found to have elevated levels of lead in their blood (MWWR Article: February 21,1997). The deterioration of many of these walls is to the point that lead can freely enter the living space.

Wendt, Robert L. [Oak Ridge National Lab., TN (United States); Cavallo, James [Argonne National Lab., IL (United States)

1997-09-25T23:59:59.000Z

140

Templeman Library Journal loan  

E-Print Network [OSTI]

Templeman Library Journal loan Only postgraduate students or academic staff can borrow journals ............................................................................ * Initials ............................................................................ * Library card number ............................................................................ Fields marked * are required The item will be issued to your Library account for one week, normally

Banaji,. Murad

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

DefectDomain Wall Interactions in Trigonal  

E-Print Network [OSTI]

Defect≠Domain Wall Interactions in Trigonal Ferroelectrics Venkatraman Gopalan,1 Volkmar Dierolf,2 walls in the trigonal ferroelectrics lithium niobate and lithium tantalate. It is shown that extrinsic questions re- garding intrinsic widths, defect≠domain wall interactions, and static versus dynamic wall

Gopalan, Venkatraman

142

UCPD CRIME ALERT -Cell Phones Taken Near Rustin Avenue & Linden Street Cell Phones Taken From Victims near Rustin Avenue & Linden Street  

E-Print Network [OSTI]

UCPD CRIME ALERT - Cell Phones Taken Near Rustin Avenue & Linden Street Cell Phones Taken From Department responded to two(2) cell phone snatchings that occurred at about 6:00 pm and again at about 9 to be aware of their surroundings, to not be distracted by cell phones/electronic devices and to keep those

Lyubomirsky, Ilya

143

Turbine airfoil with outer wall thickness indicators  

DOE Patents [OSTI]

A turbine airfoil usable in a turbine engine and including a depth indicator for determining outer wall blade thickness. The airfoil may include an outer wall having a plurality of grooves in the outer surface of the outer wall. The grooves may have a depth that represents a desired outer surface and wall thickness of the outer wall. The material forming an outer surface of the outer wall may be removed to be flush with an innermost point in each groove, thereby reducing the wall thickness and increasing efficiency. The plurality of grooves may be positioned in a radially outer region of the airfoil proximate to the tip.

Marra, John J; James, Allister W; Merrill, Gary B

2013-08-06T23:59:59.000Z

144

MHD Electrode and wall constructions  

DOE Patents [OSTI]

Electrode and wall constructions for the walls of a channel transmitting the hot plasma in a magnetohydrodynamic generator. The electrodes and walls are made of a plurality of similar modules which are spaced from one another along the channel. The electrodes can be metallic or ceramic, and each module includes one or more electrodes which are exposed to the plasma and a metallic cooling bar which is spaced from the plasma and which has passages through which a cooling fluid flows to remove heat transmitted from the electrode to the cooling bar. Each electrode module is spaced from and electrically insulated from each adjacent module while interconnected by the cooling fluid which serially flows among selected modules. A wall module includes an electrically insulating ceramic body exposed to the plasma and affixed, preferably by mechanical clips or by brazing, to a metallic cooling bar spaced from the plasma and having cooling fluid passages. Each wall module is, similar to the electrode modules, electrically insulated from the adjacent modules and serially interconnected to other modules by the cooling fluid.

Way, Stewart (Columbia, MD); Lempert, Joseph (Penn Hills, PA)

1984-01-01T23:59:59.000Z

145

Journal Covers  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region serviceMission Statement Titan TargetIn ThisTechnologies |Journal

146

Domain walls riding the wave.  

SciTech Connect (OSTI)

Recent years have witnessed a rapid proliferation of electronic gadgets around the world. These devices are used for both communication and entertainment, and it is a fact that they account for a growing portion of household energy consumption and overall world consumption of electricity. Increasing the energy efficiency of these devices could have a far greater and immediate impact than a gradual switch to renewable energy sources. The advances in the area of spintronics are therefore very important, as gadgets are mostly comprised of memory and logic elements. Recent developments in controlled manipulation of magnetic domains in ferromagnet nanostructures have opened opportunities for novel device architectures. This new class of memories and logic gates could soon power millions of consumer electronic devices. The attractiveness of using domain-wall motion in electronics is due to its inherent reliability (no mechanical moving parts), scalability (3D scalable architectures such as in racetrack memory), and nonvolatility (retains information in the absence of power). The remaining obstacles in widespread use of 'racetrack-type' elements are the speed and the energy dissipation during the manipulation of domain walls. In their recent contribution to Physical Review Letters, Oleg Tretiakov, Yang Liu, and Artem Abanov from Texas A&M University in College Station, provide a theoretical description of domain-wall motion in nanoscale ferromagnets due to the spin-polarized currents. They find exact conditions for time-dependent resonant domain-wall movement, which could speed up the motion of domain walls while minimizing Ohmic losses. Movement of domain walls in ferromagnetic nanowires can be achieved by application of external magnetic fields or by passing a spin-polarized current through the nanowire itself. On the other hand, the readout of the domain state is done by measuring the resistance of the wire. Therefore, passing current through the ferromagnetic wire is the preferred method, as it combines manipulation and readout of the domain-wall state. The electrons that take part in the process of readout and manipulation of the domain-wall structure in the nanowire do so through the so-called spin transfer torque: When spin-polarized electrons in the ferromagnet nanowire pass through the domain wall they experience a nonuniform magnetization, and they try to align their spins with the local magnetic moments. The force that the electrons experience has a reaction force counterpart that 'pushes' the local magnetic moments, resulting in movement of the domain wall in the direction of the electron flow through the spin-transfer torque. The forces between the electrons and the local magnetic moments in the ferromagnet also create additional electrical resistance for the electrons passing through the domain wall. By measuring resistance across a segment of the nanowire, one determines if a domain wall is present; i.e., one can read the stored information. The interaction of the spin-polarized electrons with the domain wall in the ferromagnetic nanowire is not very efficient. Even for materials achieving high polarization of the free electrons, it is very difficult to move the magnetic domain wall. Several factors contribute to this problem, with imperfections of the ferromagnetic nanowire that cause domain-wall pinning being the dominant one. Permalloy nanowires, one of the best candidates for domain-wall-based memory and logic devices, require current densities of the order of 10{sup 8} A/cm{sup 2} in order to move a domain wall from a pinning well. Considering that this current has to pass through a relatively long wire, it is not very difficult to imagine that most of the energy will go to Joule heating. The efficiency of the process - the ratio of the energy converted to domain-wall motion to the total energy consumed - is comparable to that of an incandescent light bulb converting electricity to light. A step towards more efficient domain-wall-based memory devices is the advance of using alternating currents or curren

Karapetrov, G.; Novosad, V.; Materials Science Division

2010-11-01T23:59:59.000Z

147

Assessing the knowledge, attitudes and practices of street food vendors in the City of Johannesburg regarding food hygiene and safety .  

E-Print Network [OSTI]

??This study is aimed to assess the extent of street food vendor information and education on food safety. Aim: To determine the knowledge, attitudes andÖ (more)

Campbell, Penelope Tracy

2011-01-01T23:59:59.000Z

148

On Lines, Place-making and Childrenís Play. An Exploration of Street Life in the Netherlands  

E-Print Network [OSTI]

Utrecht University in the Netherlands. Vermeulen, Jeroen. ďof Street Life in the Netherlands Jeroen Vermeulen Abstractcity of Utrecht in the Netherlands. More specifically, the

Vermeulen, Jeroen

2015-01-01T23:59:59.000Z

149

Domain Walls, Triples and Acceleration  

E-Print Network [OSTI]

We present a construction of domain walls in string theory. The domain walls can bridge both Minkowski and AdS string vacua. A key ingredient in the construction are novel classical Yang-Mills configurations, including instantons, which interpolate between toroidal Yang-Mills vacua. Our construction provides a concrete framework for the study of inflating metrics in string theory. In some cases, the accelerating space-time comes with a holographic description. The general form of the holographic dual is a field theory with parameters that vary over space-time.

Travis Maxfield; Savdeep Sethi

2014-04-09T23:59:59.000Z

150

JOURNAL DE PHYSIQUE Colloque C5, suppl6ment au n05, Tome 50, mai 1989  

E-Print Network [OSTI]

JOURNAL DE PHYSIQUE Colloque C5, suppl6ment au n05, Tome 50, mai 1989 MODELING OF COLD WALL time, our software is designed to simulate only two dimensionnal axisymmetric problems (cylindrical. 1 - INTRODUCTION The design of CVD reactors involves cross-disciplinary sciences which will allow

Paris-Sud XI, Universitť de

151

JOURNAL DE PHYSIQUE Colloque C5, suppl6ment au n05, Tome 50, mai 1989  

E-Print Network [OSTI]

gaz vecteur et du rapport O2/SiH4. Abstract A cold wall lbw temperature oxide (LTO) process and available at http://dx.doi.org/10.1051/jphyscol:1989549 #12;JOURNAL DE PHYSIQUE A specially designed cold. Optimalisation of these parameters is a crucial re- quirement for manufacturers (reactor design, process control

Paris-Sud XI, Universitť de

152

Steel-framed buildings: Impacts of wall detail configurations on the whole wall thermal performance  

SciTech Connect (OSTI)

The main objective of this paper is the influence of architectural wall details on the whole wall thermal performance. Whole wall thermal performance analysis was performed for six light gage steel-framed wall systems (some with wood components). For each wall system, all wall details were simulated using calibrated 3-D finite difference computer modeling. The thermal performance of the six steel-framed wall systems included various system details and the whole wall system thermal performance for a typical single-story ranch house. Currently, predicted heat losses through building walls are typically based on measurements of the wall system clear wall area using test methods such as ASTM C 236 or are calculated by one of the procedures recommended in the ASHRAE Handbook of Fundamentals that often is carried out for the clear wall area exclusively. In this paper, clear wall area is defined as the part of the wall system that is free of thermal anomalies due to building envelope details or thermally unaffected by intersections with other surfaces of the building envelope. Clear wall experiments or calculations normally do not include the effects of building envelope details such as corners, window and door openings, and structural intersections with roofs, floors, ceilings, and other walls. In steel-framed wall systems, these details typically consist of much more structural components than the clear wall. For this situation, the thermal properties measured or calculated for the clear wall area do not adequately represent the total wall system thermal performance. Factors that would impact the ability of today`s standard practice to accurately predict the total wall system thermal performance are the accuracy of the calculation methods, the area of the total wall that is clear wall, and the quantity and thermal performance of the various wall system details.

Kosny, J.; Desjarlais, A.O.; Christian, J.E.

1998-06-01T23:59:59.000Z

153

Magnetic domain walls driven by interfacial phenomena  

E-Print Network [OSTI]

A domain wall in a ferromagnetic material is a boundary between differently magnetized regions, and its motion provides a convenient scheme to control the magnetization state of the material. Domain walls can be confined ...

Emori, Satoru

2014-01-01T23:59:59.000Z

154

Streets and Patterns. By Stephen Marshall. (London and New York: Spon Press, 2005). [Pp. 312.] $ 69.95. ISBN 0415317509.  

E-Print Network [OSTI]

1 Streets and Patterns. By Stephen Marshall. (London and New York: Spon Press, 2005). [Pp. 312.] $ 69.95. ISBN 0415317509. Stephen Marshall's Streets and Patterns covers ten years of research structure, respectively. In Chapter 3, Marshall claims the modern road hierarchy with its almost exclusive

Levinson, David M.

155

Health, Counselling and Disability Services (HCDS) 146 Stuart Street (613) 533-2506 www.queensu.ca/hcds  

E-Print Network [OSTI]

Health, Counselling and Disability Services (HCDS) 146 Stuart Street (613) 533-2506 www For in Students: · Listlessness, lack of energy, or apparent loss of interest · Unusual or bizarre behavior, sexual or cultural identity #12;Health, Counselling and Disability Services (HCDS) 146 Stuart Street (613

Abolmaesumi, Purang

156

Wall Drying in Hot and Humid Climates  

E-Print Network [OSTI]

drying potential while at the same time providing a high potential for mold growth. To reduce moisture accumulation in wall systems, it is important to design wall systems that not only reduce moisture intrusion, but also allow drying. Yet often a wall...

Boone, K.; Weston, T.; Pascual, X.

2004-01-01T23:59:59.000Z

157

www.VadoseZoneJournal.org Vadose Zone Journal  

E-Print Network [OSTI]

and internationally. The high proportion of scholarly submissions from international scien- tists outsidewww.VadoseZoneJournal.org Vadose Zone Journal: The First Ten Years We proudly present a special section inspired by the 10-year anniversary of Vadose Zone Journal. From the outset, the journal

Vrugt, Jasper A.

158

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

Journal of Fluid Mechanics http://journals.cambridge.org/FLM Additional services for Journal of Fluid Mechanics: Email alerts: Click here Subscriptions: Click here Commercial reprints: Click here, John R. Lister and M. Grae Worster Journal of Fluid Mechanics / Volume 700 / June 2012, pp 63 76 DOI

Worster, M. Grae

159

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

Journal of Fluid Mechanics http://journals.cambridge.org/FLM Additional services for Journal of Fluid Mechanics: Email alerts: Click here Subscriptions: Click here Commercial reprints: Click here. Woodhouse and Raymond E. Goldstein Journal of Fluid Mechanics / Volume 705 / August 2012, pp 165 175 DOI

Goldstein, Raymond E.

160

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

Journal of Fluid Mechanics http://journals.cambridge.org/FLM Additional services for Journal of Fluid Mechanics: Email alerts: Click here Subscriptions: Click here Commercial reprints: Click here. Pegler and M. Grae Worster Journal of Fluid Mechanics / Volume 696 / April 2012, pp 152 174 DOI: 10

Worster, M. Grae

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

Journal of Fluid Mechanics http://journals.cambridge.org/FLM Additional services for Journal of Fluid Mechanics: Email alerts: Click here Subscriptions: Click here Commercial reprints: Click here and E. I. Parau Journal of Fluid Mechanics / Volume 688 / December 2011, pp 528 550 DOI: 10.1017/jfm

Parau, Emilian I.

162

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

Journal of Fluid Mechanics http://journals.cambridge.org/FLM Additional services for Journal of Fluid Mechanics: Email alerts: Click here Subscriptions: Click here Commercial reprints: Click here. Paoletti and Harry L. Swinney Journal of Fluid Mechanics / Volume 706 / September 2012, pp 571 583 DOI: 10

Texas at Austin. University of

163

Copyright 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036  

E-Print Network [OSTI]

Copyright © 2011 American Chemical Society 1155 Sixteenth Street N.W., Washington, DC 20036 For Selected: Application of Highly Ordered TiO2 Nanotube Arrays in Flexible Dye-Sensitized Solar Cells Daibin Light-Emitting Diodes on Solution-Processed Graphene Transparent Electrodes Junbo Wu, Mukul Agrawal, H

Aksay, Ilhan A.

164

Facilities & Real Estate Services, 3101 Walnut Street, Philadelphia, PA 19104 Vehicular & Pedestrian Instructions  

E-Print Network [OSTI]

Walnut Street / Jones Way and turn right onto Jones Way. At the Class of 1923 Ice Rink, turn left and follow the one-way route around the Ice Rink to the FRES receiving area located at 3133 Jones Way. #12

Sharp, Kim

165

Air quality monitoring and modelling techniques for street canyons: the Paris  

E-Print Network [OSTI]

2000-37 Air quality monitoring and modelling techniques for street canyons: the Paris experience S of developing efficient air quality monitoring and modelling methodologies to cover the needs of public health, published in "Air Pollution Conference 2000, Cambridge : United Kingdom (2000)" #12;1 Introduction In recent

Paris-Sud XI, Université de

166

Environmental geophysics at Kings Creek Disposal Site and 30th Street Landfill, Aberdeen Proving Ground, Maryland  

SciTech Connect (OSTI)

Geophysical studies on the Bush River Peninsula in the Edgewood Area of Aberdeen Proving Ground, Maryland, delineate landfill areas and provide diagnostic signatures of the hydrogeologic framework and possible contaminant pathways. These studies indicate that, during the Pleistocene Epoch, alternating stands of high and low seal levels resulted in a complex pattern of shallow channel-fill deposits in the Kings Creek area. Ground-penetrating radar studies reveal a paleochannel greater than 50 ft deep, with a thalweg trending offshore in a southwest direction into Kings Creek. Onshore, the ground-penetrating radar data indicate a 35-ft-deep branch to the main channel, trending to the north-northwest directly beneath the 30th Street Landfill. Other branches are suspected to meet the offshore paleochannel in the wetlands south and east of the 30th Street Landfill. This paleochannel depositional system is environmentally significant because it may control the shallow groundwater flow regime beneath the site. Electromagnetic surveys have delineated the pre-fill lowland area currently occupied by the 30th Street Landfill. Magnetic and conductive anomalies outline surficial and buried debris throughout the study area. On the basis of geophysical data, large-scale dumping has not occurred north of the Kings Creek Disposal Site or east of the 30th Street Landfill.

Davies, B.E.; Miller, S.F.; McGinnis, L.D.; Daudt, C.R.; Thompson, M.D.; Stefanov, J.E.; Benson, M.A.; Padar, C.A.

1995-01-01T23:59:59.000Z

167

An Ethnographer among Street-Level Bureaucrats and New Public Management  

E-Print Network [OSTI]

An Ethnographer among Street-Level Bureaucrats and New Public Management Jean-Marc Weller CNRS experiencing new public management measures. With an ethnographic approach based on French Administration cases administration, new public management CEB Working Paper N¬į 12/033 2012 Universit√© Libre de Bruxelles - Solvay

Paris-Sud XI, Université de

168

COLUMBIA RIVER INTER-TRIBAL FISH COMMISSION 700 NE Multnomah Street, Suite 1200  

E-Print Network [OSTI]

COLUMBIA RIVER INTER-TRIBAL FISH COMMISSION 700 NE Multnomah Street, Suite 1200 Portland, Oregon 97232 F (503) 235-4228 (503) 238-0667 F (503) 235-4228 www.critfc.org Putting fish back in the rivers and protecting the watersheds where fish live September 17, 2013 Bill Bradbury, Chairman Northwest Power

169

Uranium Watch 76 South Main Street, # 7 | P.O. Box 344  

E-Print Network [OSTI]

Uranium Watch 76 South Main Street, # 7 | P.O. Box 344 Moab, Utah 84532 435-26O-8384, May 2, 2014. Dear Mr. Rosnick: REQUEST FOR EXTENSION OF TIME TO SUBMIT COMMENTS Uranium Watch requests Rosnick/EPA 2 June 10, 2014 1 http://www.radiationcontrol.utah.gov/Uranium_Mills/uraniumone/docs/2012

170

Influence of air conditioning management on heat island in Paris air street temperatures  

E-Print Network [OSTI]

Influence of air conditioning management on heat island in Paris air street temperatures Brice 2012 Available online 13 March 2012 Keywords: Air conditioning Heat island mitigation Urban heat island killer'', is exacerbated in urban areas owing to the heat island effect. Air conditioning (A/C) is a key

Ribes, Aurélien

171

career services Gordon Hall, 74 Union Street 613 533 2992 careers.queensu.ca  

E-Print Network [OSTI]

career services Gordon Hall, 74 Union Street 613 533 2992 careers.queensu.ca Finding a Job, Mackintosh-Corry Hall) look for articles about upcoming events and consider attending be alert for possible://myAMS.org/jobs-volunteering - 613-533-3001 Athletics & Recreation Facility staff, lifeguards, swim instructors, fitness instructors

Abolmaesumi, Purang

172

Chip in a lab: Microfluidics for next generation life science Aaron M. Streets1,2  

E-Print Network [OSTI]

Chip in a lab: Microfluidics for next generation life science research Aaron M. Streets1 January 2013; published online 31 January 2013) Microfluidic circuits are characterized by fluidic measurements. Microfluidic technology has thus become a powerful tool in the life science research laboratory

Huang, Yanyi

173

Interactions between Catchbasin and Street Cleaning in Urban Drainages and Sediment Transport in Storm Drainage Systems  

E-Print Network [OSTI]

1 Interactions between Catchbasin and Street Cleaning in Urban Drainages and Sediment Transport ...................................................................................................................................................................24 Abstract Much research has been conducted on the transport, settling, and scour of gross solids transport in separate storm drainage has not been considered to be a significant problem for public works

Pitt, Robert E.

174

7900 SE 28th Street, Suite 200 Mercer, Island, WA 98040-2970  

E-Print Network [OSTI]

7900 SE 28th Street, Suite 200 Mercer, Island, WA 98040-2970 v 206.236.7200 f 206.236.3019 www-standing rivalries over the distribution of the Northwest's premiere asset. It will allow the customers to apply to acquire new generation assets. This conclusion, also reached by the Comprehensive Review of the Northwest

175

Potential Flow Model of a Vortex Street Near a Fish-like Body  

E-Print Network [OSTI]

Potential Flow Model of a Vortex Street Near a Fish-like Body Joshua Brulé, University of Maryland to inviscid, irrotational solutions of Navier-Stokes · Vortex potential: "A model of the lateral line of fish for vortex sensing." Ren Z, Mohseni K. 2012 #12;Vortex near a (circular) fish · (Insert your own spherical

Anlage, Steven

176

Australian Academy of Science Ian Potter House, Gordon Street, Canberra 2601  

E-Print Network [OSTI]

.daff.gov.au. Please liaise with your host on this matter. GPO Box 783, Canberra ACT 2601, Australia | Tel +61 (0Australian Academy of Science Ian Potter House, Gordon Street, Canberra 2601 RI 2.3.1 9 March 2011 is delighted to invite you to visit Australia as a participant in the 2011 East Asia and Pacific Summer

177

Demonstration Assessment of Light-Emitting Diode (LED) Street Lighting Host Site: Lija Loop, Portland, Oregon  

SciTech Connect (OSTI)

This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a residential street lighting application, under the U.S. Department of Energy GATEWAY Solid-State Lighting Technology Demonstration Program. In this project, eight 100W (nominal) high-pressure sodium cobra head fixtures were replaced with a like number of LED street light luminaires manufactured by Leotek, Inc. The Leotek product achieved an estimated payback in the Lija Loop installation of about 20 years for replacement scenarios and a much shorter 7.6 years for new installations. Much of the associated energy savings (55%) supporting these payback periods, however, were achieved by reducing average horizontal photopic illuminance a similar amount (53%). Examined from a different perspective, the measured performance suggests that the Leotek product is at approximate parity with the HPS cobra head in terms of average delivered photopic illumination for a given power consumption. HPS comprises the second most efficacious street lighting technology available, exceeded only by low pressure sodium (LPS). LPS technology is not considered suitable for most street lighting applications due to its monochromatic spectral output and poor color rendering ability; therefore, this LED product is performing at an efficiency level comparable to its primary competition in this application.

Kinzey, Bruce R.; Myer, Michael

2009-11-01T23:59:59.000Z

178

3.d. TYPE (Street or Off-road) COMMANDER'S MOTORCYCLE SAFETY INTERVIEW  

E-Print Network [OSTI]

3.d. TYPE (Street or Off-road) COMMANDER'S MOTORCYCLE SAFETY INTERVIEW AETC FORM 708, APR 98 (EF-V2-207/AETC Sup 1. PURPOSE: To gather data and background information for use in managing the unit motorcycle be susceptible to a motorcycle accident. The intent is to identify potential problems that could lead to injury

179

Field measurements of lateral earth pressures on a pre-cast panel retaining wall  

E-Print Network [OSTI]

OF SCIENCE August 1973 Major Subject: Civil Engineering FIELD MEASUREMENTS OF LATERAL EARTH PRESSURES ON A PRE-CAST PANEL RETAINING WALL A Thesis by DAVID MONROE PRESCOTT Approved as to sty1e and content by: Chai man o Co ttee~ ember ead of Departm... in Appendix I. (The style and format of this thesis follows that used by the Journal of the Soil Mechanics and Foundations Division, Procee ings, of t e American Society of Civil Engineers result of some large scale earth pressure tests at Massachusetts...

Prescott, David Monroe

1973-01-01T23:59:59.000Z

180

ABOUT THE JOURNAL One of the oldest journals in geology, The Journal of Geology has  

E-Print Network [OSTI]

ABOUT THE JOURNAL One of the oldest journals in geology, The Journal of Geology has promoted the systematic philosophical and fundamental study of geology since 1893. The Journal publishes original research across a broad range of subfields in geology, including geophysics, geochemistry, sedimentology

Mateo, Jill M.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Evaluation of Wall Boundary Condition Parameters for Gas-Solids Fluidized Bed Simulations  

SciTech Connect (OSTI)

Wall boundary conditions for the solids phase have significant effects on numerical predictions of various gas-solids fluidized beds. Several models for the granular flow wall boundary condition are available in the open literature for numerical modeling of gas-solids flow. In this study, a model for specularity coefficient used in Johnson and Jackson boundary conditions by Li and Benyahia (AIChE Journal, 2012, 58, 2058-2068) is implemented in the open-source CFD code-MFIX. The variable specularity coefficient model provides a physical way to calculate the specularity coefficient needed by the partial-slip boundary conditions for the solids phase. Through a series of 2-D numerical simulations of bubbling fluidized bed and circulating fluidized bed riser, the model predicts qualitatively consistent trends to the previous studies. Furthermore, a quantitative comparison is conducted between numerical results of variable and constant specularity coefficients to investigate the effect of spatial and temporal variations in specularity coefficient.

Li, Tingwen; Benyahia, Sofiane

2013-10-01T23:59:59.000Z

182

POROUS WALL, HOLLOW GLASS MICROSPHERES  

SciTech Connect (OSTI)

Hollow Glass Microspheres (HGM) is not a new technology. All one has to do is go to the internet and Google{trademark} HGM. Anyone can buy HGM and they have a wide variety of uses. HGM are usually between 1 to 100 microns in diameter, although their size can range from 100 nanometers to 5 millimeters in diameter. HGM are used as lightweight filler in composite materials such as syntactic foam and lightweight concrete. In 1968 a patent was issued to W. Beck of the 3M{trademark} Company for 'Glass Bubbles Prepared by Reheating Solid Glass Particles'. In 1983 P. Howell was issued a patent for 'Glass Bubbles of Increased Collapse Strength' and in 1988 H. Marshall was issued a patent for 'Glass Microbubbles'. Now Google{trademark}, Porous Wall, Hollow Glass Microspheres (PW-HGMs), the key words here are Porous Wall. Almost every article has its beginning with the research done at the Savannah River National Laboratory (SRNL). The Savannah River Site (SRS) where SRNL is located has a long and successful history of working with hydrogen and its isotopes for national security, energy, waste management and environmental remediation applications. This includes more than 30 years of experience developing, processing, and implementing special ceramics, including glasses for a variety of Department of Energy (DOE) missions. In the case of glasses, SRS and SRNL have been involved in both the science and engineering of vitreous or glass based systems. As a part of this glass experience and expertise, SRNL has developed a number of niches in the glass arena, one of which is the development of porous glass systems for a variety of applications. These porous glass systems include sol gel glasses, which include both xerogels and aerogels, as well as phase separated glass compositions, that can be subsequently treated to produce another unique type of porosity within the glass forms. The porous glasses can increase the surface area compared to 'normal glasses of a 1 to 2 order of magnitude, which can result in unique properties in areas such as hydrogen storage, gas transport, gas separations and purifications, sensors, global warming applications, new drug delivery systems and so on. One of the most interesting porous glass products that SRNL has developed and patented is Porous Wall, Hollow Glass Microspheres (PW-HGMs) that are being studied for many different applications. The European Patent Office (EPO) just recently notified SRS that the continuation-in-part patent application for the PW-HGMs has been accepted. The original patent, which was granted by the EPO on June 2, 2010, was validated in France, Germany and the United Kingdom. The microspheres produced are generally in the range of 2 to 100 microns, with a 1 to 2 micron wall. What makes the SRNL microspheres unique from all others is that the team in Figure 1 has found a way to induce and control porosity through the thin walls on a scale of 100 to 3000 {angstrom}. This is what makes the SRNL HW-HGMs one-of-a-kind, and is responsible for many of their unique properties and potential for various applications, including those in tritium storage, gas separations, H-storage for vehicles, and even a variety of new medical applications in the areas of drug delivery and MRI contrast agents. SRNL Hollow Glass Microspheres, and subsequent, Porous Wall, Hollow Glass Microspheres are fabricated using a flame former apparatus. Figure 2 is a schematic of the apparatus.

Sexton, W.

2012-06-30T23:59:59.000Z

183

First Wall and Operational Diagnostics  

SciTech Connect (OSTI)

In this chapter we review numerous diagnostics capable of measurements at or near the first wall, many of which contribute information useful for safe operation of a tokamak. There are sections discussing infrared cameras, visible and VUV cameras, pressure gauges and RGAs, Langmuir probes, thermocouples, and erosion and deposition measurements by insertable probes and quartz microbalance. Also discussed are dust measurements by electrostatic detectors, laser scattering, visible and IR cameras, and manual collection of samples after machine opening. In each case the diagnostic is discussed with a view toward application to a burning plasma machine such as ITER.

Lasnier, C; Allen, S; Boedo, J; Groth, M; Brooks, N; McLean, A; LaBombard, B; Sharpe, J; Skinner, C; Whyte, D; Rudakov, D; West, W; Wong, C

2006-06-19T23:59:59.000Z

184

Analysis of Rotating Collectors from the Private Region of JET with Carbon Wall and Metallic ITER-Like Wall  

E-Print Network [OSTI]

Analysis of Rotating Collectors from the Private Region of JET with Carbon Wall and Metallic ITER-Like Wall

185

NEUROCOMPUTING JOURNAL SPECIAL ISSUE  

E-Print Network [OSTI]

NEUROCOMPUTING JOURNAL SPECIAL ISSUE "ARTIFICIAL BRAINS" Call for Papers Guest Editors Prof. Dr for review to a special issue of the Neurocomputing journal, on the theme of "Artificial Brains". Background, and more powerful FPGA based accelerator boards, etc. thus allowing builders of "artificial brains" more

Wojcik, Vladimir

186

SRNL POROUS WALL GLASS MICROSPHERES  

SciTech Connect (OSTI)

The Savannah River National Laboratory (SRNL) has developed a new medium for storage of hydrogen and other gases. This involves fabrication of thin, Porous Walled, Hollow Glass Microspheres (PW-HGMs), with diameters generally in the range of 1 to several hundred microns. What is unique about the glass microballons is that porosity has been induced and controlled within the thin, one micron thick walls, on the scale of 10 to several thousand Angstroms. This porosity results in interesting properties including the ability to use these channels to fill the microballons with special absorbents and other materials, thus providing a contained environment even for reactive species. Gases can now enter the microspheres and be retained on the absorbents, resulting in solid-state and contained storage of even reactive species. Also, the porosity can be altered and controlled in various ways, and even used to filter mixed gas streams within a system. SRNL is involved in about a half dozen different programs involving these PW-HGMs and an overview of some of these activities and results emerging are presented.

Wicks, G; Leung Heung, L; Ray Schumacher, R

2008-04-15T23:59:59.000Z

187

Textural break foundation wall construction modules  

DOE Patents [OSTI]

Below-grade, textural-break foundation wall structures are provided for inhibiting diffusion and advection of liquids and gases into and out from a surrounding hydrogeologic environment. The foundation wall structure includes a foundation wall having an interior and exterior surface and a porous medium disposed around a portion of the exterior surface. The structure further includes a modular barrier disposed around a portion of the porous medium. The modular barrier is substantially removable from the hydrogeologic environment.

Phillips, Steven J. (Kennewick, WA)

1990-01-01T23:59:59.000Z

188

Panelized wall system with foam core insulation  

DOE Patents [OSTI]

A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

2009-10-20T23:59:59.000Z

189

First wall for polarized fusion reactors  

DOE Patents [OSTI]

Depolarization mechanisms arising from the recycling of the polarized fuel at the limiter and the first-wall of a fusion reactor are greater than those mechanisms in the plasma. Rapid depolarization of the plasma is prevented by providing a first-wall or first-wall coating formed of a low-Z, non-metallic material having a depolarization rate greater than 1 sec.sup.-1.

Greenside, Henry S. (Cranbury, NJ); Budny, Robert V. (Princeton, NJ); Post, Jr., Douglass E. (Buttonwood, CT)

1988-01-01T23:59:59.000Z

190

Liquid Walls Innovative High Power Density Concepts  

E-Print Network [OSTI]

-CLIFF 3.High-Temperature Refractory Solid Wall -EVOLVE (Two-Phase Lithium Flow) -Helium Cooling erosion as limiting factors -Results in smaller and lower cost components (chamb

California at Los Angeles, University of

191

First wall for polarized fusion reactors  

DOE Patents [OSTI]

A first-wall or first-wall coating for use in a fusion reactor having polarized fuel may be formed of a low-Z non-metallic material having slow spin relaxation, i.e., a depolarization rate greater than 1 sec/sup -1/. Materials having these properties include hydrogenated and deuterated amorphous semiconductors. A method for preventing the rapid depolarization of a polarized plasma in a fusion device may comprise the step of providing a first-wall or first-wall coating formed of a low-Z, non-metallic material having a depolarization rate greater than 1 sec/sup -1/.

Greenside, H.S.; Budny, R.V.; Post, D.E. Jr.

1985-01-29T23:59:59.000Z

192

Multiple moving wall dry coal extrusion pump  

DOE Patents [OSTI]

A pump for transporting particulate material includes a passageway defined on each side between an inlet and an outlet by a moving wall.

Fitzsimmons, Mark Andrew

2013-05-14T23:59:59.000Z

193

Flow of autonomous traffic on a single multi-lane street  

E-Print Network [OSTI]

We investigate the behaviour of an original traffic model. The model considers a single multi-lane street, populated by autonomous vehicles directed from either end to the other. Lanes have no intrinsic directionality, and the vehicles are inserted at random at either end and any lane. Collision avoidance is fully automatic and, to enhance the transport capacity of the street, vehicles form_trains_ in which they may travel at high speed quite close to the vehicle in front. We report on the transit times for vehicles under a wide variety of conditions: vehicle insertion probability & imbalance and their maximum speed distribution. We also outline an interesting feature of the model, that the complex interactions of many vehicles are considerably more powerful than a simple "keep left" directive which each vehicle should obey.

Polito, Federico

2007-01-01T23:59:59.000Z

194

Knowledge Based Enterprises, Knowledge Economy and Knowledge Management: Recommended Academic Journals  

E-Print Network [OSTI]

and Learning International Journal of Learning and Intellectual Capital International Journal of Technology Journal of Information Technology Journal of International Business Studies* Journal of Knowledge of Strategic Information Systems Journal of Technology Transfer Journal of the American Statistical

Graham, Nick

195

Zero-Waste Events Harvard Office for Sustainability, 46 Blackstone Street, Cambridge, MA 02139 www.green.harvard.edu  

E-Print Network [OSTI]

Zero-Waste Events Harvard Office for Sustainability, 46 Blackstone Street, Cambridge, MA 02139 www.green-compostable materials (i.e. coffee stirrers, tea in foil bags, little creamers) 3. Determine all food and products

Wolfe, Patrick J.

196

Subscriber access provided by MIT Nano Letters is published by the American Chemical Society. 1155 Sixteenth Street  

E-Print Network [OSTI]

, such as organic light-emitting devices (OLEDs)2 and solar cells,4,5 has been demonstrated and appears promising Sixteenth Street N.W., Washington, DC 20036 Letter Bias-Induced Photoluminescence Quenching of Single

197

Use of vegetation for abatement of road traffic noise in a 1:10 scale street model  

E-Print Network [OSTI]

Use of vegetation for abatement of road traffic noise in a 1:10 scale street model J.Y. Jeona , H was constructed to evaluate the noise abatement by use of vegetation as sustainable means. The model materials

Paris-Sud XI, Université de

198

Street-level air quality : exploring the feasibility of a cyclist-led, crowdsourced map in Singapore and Mexico  

E-Print Network [OSTI]

This thesis explores the feasibility of creating a street-level air quality map, whereby cyclists gather data through a participatory sensing process as they ride around the city. I explore two primary areas required for ...

Holub, Amalia R. (Amalia Rae)

2014-01-01T23:59:59.000Z

199

register today: http://cru.ucdavis.edu/summercamps Questions? apressdawson@ucdavis.edu 1715 I Street, Sacramento  

E-Print Network [OSTI]

1715 I Street, Sacramento July 15-19 ­ 3d Printing & Product development Create things to do stuff, and have fun making and innovating. They'll leave inspired and capable of turning ideas into 3-D printed

Ferrara, Katherine W.

200

The Municipal Solid-State Street Lighting Consortium Public Outdoor Lighting Inventory: Phase I: Survey Results  

SciTech Connect (OSTI)

This document presents the results of a voluntary web-based inventory survey of public street and area lighting across the U.S. undertaken during the latter half of 2013.This survey attempts to access information about the national inventory in a ďbottoms-upĒ manner, going directly to owners and operators. Adding to previous ďtop downĒ estimates, it is intended to improve understanding of the role of public outdoor lighting in national energy use.

Kinzey, Bruce R.; Smalley, Edward; Haefer, R.

2014-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Virtual gap dielectric wall accelerator  

DOE Patents [OSTI]

A virtual, moving accelerating gap is formed along an insulating tube in a dielectric wall accelerator (DWA) by locally controlling the conductivity of the tube. Localized voltage concentration is thus achieved by sequential activation of a variable resistive tube or stalk down the axis of an inductive voltage adder, producing a "virtual" traveling wave along the tube. The tube conductivity can be controlled at a desired location, which can be moved at a desired rate, by light illumination, or by photoconductive switches, or by other means. As a result, an impressed voltage along the tube appears predominantly over a local region, the virtual gap. By making the length of the tube large in comparison to the virtual gap length, the effective gain of the accelerator can be made very large.

Caporaso, George James; Chen, Yu-Jiuan; Nelson, Scott; Sullivan, Jim; Hawkins, Steven A

2013-11-05T23:59:59.000Z

202

Beetle Kill Wall at NREL  

ScienceCinema (OSTI)

When it comes to designing an interior decorative feature for one of the most energy efficient office buildings in the world, very few would consider bringing in a beetle to do the job. But thats what happened at the U.S. Department of Energy's (DOE) Research Support Facility (RSF) located on the National Renewable Energy Laboratory (NREL) campus.In June, the RSF will become home to more than 800 workers from DOE and NREL and building visitors will be greeted with a soaring, two-story high wall entirely covered with wood harvested from the bark beetle infestation that has killed millions of pine trees in the Western U.S. But, the use of beetle kill wood is just one example of the resources being leveraged to make the RSF a model for sustainability and one more step toward NRELs goal to be a net zero energy campus.

None

2013-05-29T23:59:59.000Z

203

Arterial-street signal timing strategies to provide additional through-traffic capacity during freeway incident conditions  

E-Print Network [OSTI]

relationships identified are likely to be common to other arterial-street sections with similar configurations and traffic patterns. ACKNOWLEDGMENTS This research was funded by Project No. 30, "Fuel Savings from Surveillance, Signing, and Signal Control... timing plan to accommodate diverted traffic from a freeway plays a significant role in the development of integrated freeway and arterial street control systems like the Automated Traffic Surveillance gnd control (ATSAC) system in Los Angeles (Rowe...

Dale, James Joseph

1992-01-01T23:59:59.000Z

204

Near-wall serpentine cooled turbine airfoil  

DOE Patents [OSTI]

A serpentine coolant flow path is formed by inner walls in a cavity between pressure and suction side walls of a turbine airfoil, the cavity partitioned by one or more transverse partitions into a plurality of continuous serpentine cooling flow streams each having a respective coolant inlet.

Lee, Ching-Pang

2014-10-28T23:59:59.000Z

205

Remarks on Liquid Wall Research Mohamed Abdou  

E-Print Network [OSTI]

Remarks on Liquid Wall Research Mohamed Abdou Professor Mechanical and Aerospace Engineering UCLA physicists and engineering scientists · Enhances synergism between IFE and MFE · Provides excellent disciplines. #12;Several "Ideas" Have Been Proposed for Liquid Walls Fluids 1) High-conductivity, low Pr

California at Los Angeles, University of

206

External Insulation of Masonry Walls and Wood Framed Walls  

SciTech Connect (OSTI)

The use of exterior insulation on a building is an accepted and effective means to increase the overall thermal resistance of the assembly that also has other advantages of improved water management and often increased air tightness of building assemblies. For thin layers of insulation (1" to 1 1/2"), the cladding can typically be attached directly through the insulation back to the structure. For thicker insulation layers, furring strips have been added as a cladding attachment location. This approach has been used in the past on numerous Building America test homes and communities (both new and retrofit applications), and has been proven to be an effective and durable means to provide cladding attachment. However, the lack of engineering data has been a problem for many designers, contractors, and code officials. This research project developed baseline engineering analysis to support the installation of thick layers of exterior insulation on existing masonry and frame walls. Furthermore, water management details necessary to integrate windows, doors, decks, balconies and roofs were created to provide guidance on the integration of exterior insulation strategies with other enclosure elements.

Baker, P.

2013-01-01T23:59:59.000Z

207

2003 Plant Cell Walls Gordon Conference  

SciTech Connect (OSTI)

This conference will address recent progress in many aspects of cell wall biology. Molecular, genetic, and genomic approaches are yielding major advances in our understanding of the composition, synthesis, and architecture of plant cell walls and their dynamics during growth, and are identifying the genes that encode the machinery needed to make their biogenesis possible. This meeting will bring together international scientists from academia, industry and government labs to share the latest breakthroughs and perspectives on polysaccharide biosynthesis, wood formation, wall modification, expansion and interaction with other organisms, and genomic & evolutionary analyses of wall-related genes, as well as to discuss recent ''nanotechnological'' advances that take wall analysis to the level of a single cell.

Daniel J. Cosgrove

2004-09-21T23:59:59.000Z

208

International Journal of Computer Science  

E-Print Network [OSTI]

International Journal of Computer Science & Information Security © IJCSIS PUBLICATION 2010 IJCSIS Journal of Computer Science and Information Security (IJCSIS) provides a major venue for rapid publication of high quality computer science research, including multimedia, information science, security, mobile

Paris-Sud XI, Université de

209

Final Report for "Stabilization of resistive wall modes using moving metal walls"  

SciTech Connect (OSTI)

The UW experiment used a linear pinch experiment to study the stabilization of MHD by moving metal walls. The methodology of the experiment had three steps. (1) Identify and understand the no-wall MHD instability limits and character, (2) identify and understand the thin-wall MHD instabilities (re- sistive wall mode), and then (3) add the spinning wall and understand its impact on stability properties. During the duration of the grant we accomplished all 3 of these goals, discovered new physics, and completed the experiment as proposed.

Forest, Cary B.

2014-02-05T23:59:59.000Z

210

JOURNAL FOR GEOMETRY AND GRAPHICS  

E-Print Network [OSTI]

JOURNAL FOR GEOMETRY AND GRAPHICS . . . the journal for graphics educators AIMS AND SCOPE methodology in the field of graphics and graphics-related geometry by the dissemination of new results. JGG is the journal of the International Society for Geometry and Graphics FREQUENCY One volume per year, consisting

Stachel, Hellmuth

211

FREE CONVECTIVE LAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL  

E-Print Network [OSTI]

LAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL H. Akbarf andLAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL H. Akbari andchannel surfaces of the Trombe wall has been investigated.

Akbari, H.

2011-01-01T23:59:59.000Z

212

Tips for Reading Scholarly and Journal Articles What is a scholarly journal/journal article?  

E-Print Network [OSTI]

the article, be SURE to cite the source, see Brandeis' Academic Integrity page *** Quoting for definitionsTips for Reading Scholarly and Journal Articles What is a scholarly journal/journal article articles in them are how that knowledge is shared with others (like students!). In order to stay up

Snider, Barry B.

213

You have remarkable ideas. share them at the Falling Walls lab!  

E-Print Network [OSTI]

of the falling wallS lab + conference berlin 8/9 nov 2012 aPPlYnoW!www.falling-walls.com/lab THE FALLING WALLS

Heermann, Dieter W.

214

Hydrogenation of single-walled carbon nanotubes  

E-Print Network [OSTI]

Towards the development of a useful mechanism for hydrogen storage, we have studied the hydrogenation of single-walled carbon nanotubes with atomic hydrogen using core-level photoelectron spectroscopy and x-ray absorption spectroscopy. We find that atomic hydrogen creates C-H bonds with the carbon atoms in the nanotube walls and such C-H bonds can be com-pletely broken by heating to 600 oC. We demonstrate approximately 65+/-15 at % hydrogenation of carbon atoms in the single-walled carbon nanotubes which is equivalent to 5.1+/-1.2 weight % hydrogen capacity. We also show that the hydrogenation is a reversible process.

Anton Nikitin; Hirohito Ogasawara; David Mann; Reinhard Denecke; Zhiyong Zhang; Hongjie Dai; KJ Cho; Anders Nilsson

2005-10-14T23:59:59.000Z

215

Highway noise reduction by barrier walls  

E-Print Network [OSTI]

's Variables 3. Noise Reduction and Noise Reduction Factor 4. Relationship Between Noise Attenuation and d 5. Rettinger's Variables 6. Relationship of Sound-Level Reduction and v 7. Basic Principles in Sound-Transmission Loss 8. The Mass Law Relationship... that the barrier wall is acoustically opaque (i. e. , impermeable to sound waves). Purcell (8) found that the noise transmission loss of a wall was a measure of the ratio of the acoustical energy transmitted through the wall to the acoustical energy incident...

Young, Murray F

1971-01-01T23:59:59.000Z

216

Characterization of Expansive Soil For Retaining Wall Design  

E-Print Network [OSTI]

Characteristic Curves (SWCC) are determined for a site located at the intersection of I-35 and Walters Street in San Antonio, Texas. Additionally, relations between volume change with confining pressure curve, water content change with the change of confining...

Sahin, Hakan

2012-02-14T23:59:59.000Z

217

Security Walls, LLC, January 14-18, 2013  

Broader source: Energy.gov (indexed) [DOE]

their contributions to health and safety at Security Walls. Security Walls uses the Job Hazard Analysis process to address protective force hazards and develop controls. Subject...

218

Sorted Single-Walled Carbon Nanotube Films for Transparent Electrodes...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sorted Single-Walled Carbon Nanotube Films for Transparent Electrodes in Organic Solar Cells Home > Research > ANSER Research Highlights > Sorted Single-Walled Carbon Nanotube...

219

Building America Special Research Project: High-R Walls Case...  

Office of Environmental Management (EM)

Building America Special Research Project: High-R Walls Case Study Analysis Building America Special Research Project: High-R Walls Case Study Analysis This report considers a...

220

Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency Studies Using Laboratory Generated Particles. Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency...

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Radiological survey results at 12 Cliff Street, Beverly, Massachusetts (VB010)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 12 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

222

Radiological survey results at 20 Cliff Street, Beverly, Massachusetts (VB013)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 20 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

223

Radiological survey results at 6 Cliff Street, Beverly, Massachusetts (VB008)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak ridge National Laboratory conducted a radiological survey at 6 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

224

Radiological survey results at 5 Porter Street, Beverly, Massachusetts (VB019)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 5 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Site Remedial Action Program guidelines.

Foley, R.D.; Johnson, C.A.

1992-07-01T23:59:59.000Z

225

Radiological survey results at 19 Wellman Street, Beverly, Massachusetts (VB024)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 19 Wellman Street, Beverly, Massachusetts. The survey was performed in May 1991. The Purpose of the survey was to determine if uranium work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan, a beta-gamma scan of paved areas, and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Site Action Program guidelines.

Foley, R.D.; Johnson, C.A.

1992-07-01T23:59:59.000Z

226

Radiological survey results at 2 Porter Street, Beverly, Massachusetts (VB005)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 2 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples fore radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

227

Radiological survey results at 8 Cliff Street, Beverly, Massachusetts (VB009)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 8 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

228

Radiological survey results at 5 Cliff Street, Beverly, Massachusetts (VB018)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 5 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Johnson, C.A.

1992-08-01T23:59:59.000Z

229

Radiological survey results at 2 Cliff Street, Beverly, Massachusetts (VB007)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 2 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

230

Radiological survey results at 18 Cliff Street, Beverly, Massachusetts (VB012)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 18 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE mannerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

231

Radiological survey results at 9 Porter Street, Beverly, Massachusetts (VB020)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 9 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Johnson, C.A.

1992-07-01T23:59:59.000Z

232

Radiological survey results at 15 Cliff Street, Beverly, Massachusetts (VB014)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 15 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

233

Radiological survey results at 14 Cliff Street, Beverly, Massachusetts (VB011)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 14 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

234

Radiological survey results at Porter Street City Park, Beverly, Massachusetts (VB026)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the Porter Street City Park, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

Foley, R.D.; Johnson, C.A.

1992-08-01T23:59:59.000Z

235

Pecan Street Smart Grid Extension Service at the University of Texas  

SciTech Connect (OSTI)

Through funding from the Department of Energyís Electricity Delivery and Reliability O?ce, Pecan Street Inc., in partnership with Austin Energy and Oncor, developed and tested third- party data access platforms and services for Green Button o?erings and for other home energy use data providers. As more utilities seek to o?er Green Button-compliant data to their customers, the question continually arises of how this data can be used to help customers better manage their energy use.

McCracken, Brewster

2013-11-19T23:59:59.000Z

236

Radiological survey results at 9 and 11 Congress Street, Beverly, Massachusetts (VB002)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 9 and 11 Congress Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan, a beta-gamma scan of paved areas, and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionucldie concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Uziel, M.S.

1992-05-01T23:59:59.000Z

237

Radiological survey results at 15 Congress Street, Beverly, Massachusetts (VB004)  

SciTech Connect (OSTI)

At the request of the US Department of energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 15 Congress Street, Beverly, Massachusetts. The survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan, a beta-gamma scan of paved areas, and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Uziel, M.S.

1992-07-01T23:59:59.000Z

238

Radiological survey results at 13 Congress Street, Beverly, Massachusetts (VB003)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 13 Congress Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan, a beta-gamma scan of paved areas, and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines.

Foley, R.D.; Uziel, M.S.

1992-07-01T23:59:59.000Z

239

R E V I E W O F T H E M O N T H The Wall Street Collapse and Return  

E-Print Network [OSTI]

--and the bursting of the dot-com stock Robert Pollin (pollin@econs.umass.edu) is a professor of economics and co. #12;2 M O N T H l Y R E V I E W / s E P T E M b E R 2 0 1 0 market bubble in 2001. Each

Massachusetts at Amherst, University of

240

Sack Goldman Sachs Cap-and-Trade The revolving door between Washington and Wall Street has produced a new scheme to  

E-Print Network [OSTI]

, such as tree planting on degraded land, avoided deforestation in Brazil, or investments in developing countries deforestation, for example, does not reduce demand for lumber or food growing area, so deforestation moves

Hansen, James E.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

See through walls with Wi-Fi  

E-Print Network [OSTI]

Wi-Fi signals are typically information carriers between a transmitter and a receiver. In this thesis, we show that Wi-Fi can also extend our senses, enabling us to see moving objects through walls and behind closed doors. ...

Adib, Fadel

2013-01-01T23:59:59.000Z

242

See through walls with WiFi!  

E-Print Network [OSTI]

Wi-Fi signals are typically information carriers between a transmitter and a receiver. In this paper, we show that Wi-Fi can also extend our senses, enabling us to see moving objects through walls and behind closed doors. ...

Adib, Fadel M.

2013-01-01T23:59:59.000Z

243

Nonextensive statistical dynamics applied to wall turbulence  

E-Print Network [OSTI]

We apply a formalism of nonextensive statistical mechanics to experimental wall turbulence data, for the first time to our knowledge. Wind tunnel data for velocity differences a streamwise distance $r$ apart are compared to the prediction from theory as developed by Beck. The simplest theory, in which all free parameters are removed, is found to reproduce statistics for the wall-normal velocity component remarkably well, even for $r$ well beyond the corresponding integral scale, while the corresponding description of the streamwise velocity fluctuations is reasonable at separations below the integral scale. A least-squares 2-parameter fit is performed, and the dependence of the optimum parameter values on wall separation and $r$ is analysed. Both parameters are found to be approximately independent of wall-separation in the logarithmic sub-layer.

Simen Ň Ellingsen; Per-Ňge Krogstad

2014-02-10T23:59:59.000Z

244

Beautify Your Windows and Glass Walls.  

E-Print Network [OSTI]

-utside? How do your dqkrie outside of your house? 2 IlnKY color affect , Coloor, De~kn and Tex When choosing draperies to har- monize with a room, consider the room, proportions, exposure, view, walls, floors, furnishings, accessories...

Tompkins, Charlotte

1961-01-01T23:59:59.000Z

245

Anisotropic Expansion of the Plant Cell Wall  

E-Print Network [OSTI]

solar panels of leaves to the coiled grap- pling hooks of tendrils. Thompson (1917) re- alized of a unit area of cell wall is characterized by the direction and degree of anisotropy. The direction

Baskin, Tobias

246

Thin Wall Cast Iron: Phase II  

SciTech Connect (OSTI)

The development of thin-wall technology allows the designers of energy consuming equipment to select the most appropriate material based on cost/material properties considerations, and not solely on density. The technology developed in this research project will permit the designers working for the automotive industry to make a better informed choice between competing materials and thin wall cast iron, thus decreasing the overall cost of the automobile.

Doru M. Stefanescu

2005-07-21T23:59:59.000Z

247

Bremsstrahlung Radiation At a Vacuum Bubble Wall  

E-Print Network [OSTI]

When charged particles collide with a vacuum bubble, they can radiate strong electromagnetic waves due to rapid deceleration. Owing to the energy loss of the particles by this bremsstrahlung radiation, there is a non-negligible damping pressure acting on the bubble wall even when thermal equilibrium is maintained. In the non-relativistic region, this pressure is proportional to the velocity of the wall and could have influenced the bubble dynamics in the early universe.

Jae-Weon Lee; Kyungsub Kim; Chul H. Lee; Ji-ho Jang

2007-04-06T23:59:59.000Z

248

Electric and Magnetic Walls on Dielectric Interfaces  

E-Print Network [OSTI]

Sufficient conditions of the existence of electric or magnetic walls on dielectric interfaces are given for a multizone uniform dielectric waveguiding system. If one of two adjacent dielectric zones supports a TEM field distribution while the other supports a TM (TE) field distribution, then the common dielectric interface behaves as an electric (magnetic) wall, that is, the electric (magnetic) field line is perpendicular to the interface while the magnetic (electric) field line is parallel to the interface.

Changbiao Wang

2010-07-20T23:59:59.000Z

249

INTOR impurity control and first wall system  

SciTech Connect (OSTI)

The highlights of the recent INTOR effort on examining the key issues of the impurity control/first wall system are summarized. The emphasis of the work was an integrated study of the edge-region physics, plasma-wall interaction, materials, engineering and magnetic considerations associated with the poloidal divertor and pump limiter. The development of limiter and divertor collector plate designs with an acceptable lifetime was a major part of the work.

Abdou, M.A.

1983-04-01T23:59:59.000Z

250

Radiological survey results for the Peek Street site properties, Schenectady, New York  

SciTech Connect (OSTI)

The Peek Street Industrial Facility, located at 425 Peek Street, Schenectady, New York, was operated by the General Electric Company for the Atomic Energy Commission (AEC) between 1947 and 1955. A variety of operations using radioactive materials were conducted at the site, but the main activities were to design an intermediate breeder reactor and to develop a chemical process for the recovery of uranium and plutonium from spent reactor fuel. Nonradioactive beryllium metal was machined on the site for breeder reactor application. The 4.5-acre site was decommissioned and released in October 1955. A radiological survey was conducted by Oak Ridge National Laboratory in November 1989. The survey included scan and grid point measurements of direct radiation levels outdoors on the five properties and inside the factory building, and radionuclide analysis of samples collected from each property. Radionuclide concentrations were determined in outdoor surface and subsurface soil samples from each property and in dust, debris, and structural materials from inside the factory building. Auger holes were logged to assess location and extent of possible subsurface residual soil radioactivity. Radionuclide concentrations were deter-mined in both indoor and outdoor water samples and in selected samples of vegetation. The presence of fixed and transferable surface residual radioactivity was investigated inside the factory building and on discarded materials outdoors on the property. High-volume air samples as well as additional selected indoor and outdoor soil samples were analyzed to determine levels of elemental beryllium.

Foley, R.D.; Cottrell, W.D.; Carrier, R.F.

1992-08-01T23:59:59.000Z

251

Academic Journals The Open Access Revolution Choosing Where to Publish Academic Journal Publishing  

E-Print Network [OSTI]

's the articles that really count! Academic Journal Publishing John Stockie ­ SFU 7/35 #12;Academic JournalsAcademic Journals The Open Access Revolution Choosing Where to Publish Academic Journal Publishing and the Open Access Revolution John Stockie CFD Group Presentation June 10, 2013 Academic Journal Publishing

Stockie, John

252

Address: 125252, Russia, Moscow, Zorge Street, 9, www.farmina.ru The status and development trends of the Russian HP market  

E-Print Network [OSTI]

#12;2 Address: 125252, Russia, Moscow, Zorge Street, 9, www.farmina.ru The status and development Shishov, Farmina, Russia E-mail:vv@shishov.net . ., , 10.2013 #12;3 Address: 125252, Russia . ¬ę ¬Ľ 2020 . 45 , (), [1]. #12;4 Address: 125252, Russia, Moscow, Zorge Street, 9, www

Oak Ridge National Laboratory

253

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

International Center ­ 3201 South State Street, MTCC - Room 203 ­ (312)-567-3680 ­ icenter@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology Chicago-Kent College of Law 565 West Adams Street CPT. · Transfer students may count any time spent as a full-time student at the previous school

Heller, Barbara

254

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology International Center 3201 S. State Street MTCC, Room with the transfer of the above named scholar from the Illinois Institute of Technology. Name of Supervisor SignatureInternational Center ­ 3201 South State Street, MTCC - Room 203 ­ (312)-567-3680 ­ icenter

Heller, Barbara

255

Near-wall modeling of an isothermal vertical wall using one-dimensional turbulence  

E-Print Network [OSTI]

[5]. The challenge in modeling this class of flows is the coupling between the heat transfer approaches are considered for describing the heat transfer from a vertical isothermal wall. In this approach at the wall surface and the generation of turbulence from buoyancy forces, which in turn, affect

DesJardin, Paul E.

256

8232 Federal Register / Vol. 74, No. 35 / Tuesday, February 24, 2009 / Notices March 18, 6:30 p.m ....................... Rogers City, MI ............................. Presque Isle District Library, 181 East Erie Street, Rogers City, MI  

E-Print Network [OSTI]

.m ....................... Rogers City, MI ............................. Presque Isle District Library, 181 East Erie Street, Rogers City, MI 49779. March 19, 6:30 p.m ....................... Harrisville, MI ............................... Harrisville Courthouse, 106 North 5th Street, Harrisville, MI 48740. March 20, 2 p

257

SOUTHERN CALIFORNIA ENVIRONMENTAL HEALTH SCIENCES CENTER Keck School of Medicine of USC 1540 Alcazar Street, CHP Suite 236, Los Angeles, CA 90033 TEL (323) 442-1096 FAX (323) 442-3272  

E-Print Network [OSTI]

Alcazar Street, CHP Suite 236, Los Angeles, CA 90033 TEL (323) 442-1096 FAX (323) 442-3272 University Alcazar Street, CHP 236, Los Angeles, CA 90033, or email to csutton@usc.edu. Please, no paper copies

Zhang, Li I.

258

Thermodynamics of free Domain Wall fermions  

E-Print Network [OSTI]

Studying various thermodynamic quantities for the free domain wall fermions for both finite and infinite fifth dimensional extent N_5, we find that the lattice corrections are minimum for $N_T\\geq10$ for both energy density and susceptibility, for its irrelevant parameter M in the range 1.45-1.50. The correction terms are, however, quite large for small lattice sizes of $N_T\\leq8$. We propose modifications of the domain wall operator, as well as the overlap operator, to reduce the finite cut-off effects to within 10% of the continuum results of the thermodynamic quantities for the currently used N_T=6-8 lattices. Incorporating chemical potential, we show that \\mu^2 divergences are absent for a large class of such domain wall fermion actions although the chiral symmetry is broken for $\\mu\

R. V. Gavai; Sayantan Sharma

2008-11-19T23:59:59.000Z

259

Wall thickness measuring method and apparatus  

DOE Patents [OSTI]

An apparatus for measuring the wall thickness of a nonmagnetic article having a housing supporting a magnet and a contiguous supporting surface. The tubular article and the housing are releasably secured to the supporting surface and a support member of an optical comparator, respectively. To determine the wall thickness of the article at a selected point, a magnetically responsive ball is positioned within the tubular article over said point and retained therein by means of a magnetic field produced by the magnet. Thereafter, an optical comparator is employed to project a magnified image of the ball on a screen and the wall thickness at the selected point is calculated by using a ball surface measurement taken with the comparator in conjunction with a previously determined base line measurement.

Salzer, L.J.; Bergren, D.A.

1987-10-06T23:59:59.000Z

260

Wall thickness measuring method and apparatus  

DOE Patents [OSTI]

An apparatus for measuring the wall thickness of a nonmagnetic article having a housing supporting a magnet and a contiguous supporting surface. The tubular article and the housing are releasably secured to the supporting surface and a support member of an optical comparator, respectively. To determine the wall thickness of the article at a selected point, a magnetically responsive ball is positioned within the tubular article over said point and retained therein by means of a magnetic field produced by the magnet. Thereafter, an optical comparator is employed to project a magnified image of the ball on a screen and the wall thickness at the selected point is calculated by using a ball surface measurement taken with the comparator in conjunction with a previously determined base line measurement.

Salzer, Leander J. (Los Alamos, NM); Bergren, Donald A. (Los Alamos, NM)

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Turbine airfoil with a compliant outer wall  

DOE Patents [OSTI]

A turbine airfoil usable in a turbine engine with a cooling system and a compliant dual wall configuration configured to enable thermal expansion between inner and outer layers while eliminating stress formation in the outer layer is disclosed. The compliant dual wall configuration may be formed a dual wall formed from inner and outer layers separated by a support structure. The outer layer may be a compliant layer configured such that the outer layer may thermally expand and thereby reduce the stress within the outer layer. The outer layer may be formed from a nonplanar surface configured to thermally expand. In another embodiment, the outer layer may be planar and include a plurality of slots enabling unrestricted thermal expansion in a direction aligned with the outer layer.

Campbell, Christian X. (Oviedo, FL); Morrison, Jay A. (Oviedo, FL)

2012-04-03T23:59:59.000Z

262

INTEGRATED ENERGY EFFICIENT WINDOW-WALL SYSTEMS  

SciTech Connect (OSTI)

The building industry faces the challenge of reducing energy use while simultaneously improving construction methods and marketability. This paper describes the first phase of a project to address these concerns by designing an Integrated Window Wall System (IWWS) that can be commercialized. This work builds on previous research conducted during the 1990's by Lawrence Berkeley national Laboratories (LBNL). During this phase, the objective was to identify appropriate technologies, problems and issues and develop a number of design concepts. Four design concepts were developed into prototypes and preliminary energy analyses were conducted Three of these concepts (the foam wall, steel wall, and stiffened plate designs) showed particular potential for meeting the project objectives and will be continued into a second phase where one or two of the systems will be brought closer to commercialization.

Michael Arney, Ph.D.

2002-12-31T23:59:59.000Z

263

Wood Pulp Digetster Wall Corrosion Investigation  

SciTech Connect (OSTI)

The modeling of the flow in a wood pulp digester is but one component of the investigation of the corrosion of digesters. This report describes the development of a Near-Wall-Model (NWM) that is intended to couple with a CFD model that determines the flow, heat, and chemical species transport and reaction within the bulk flow of a digester. Lubrication theory approximations were chosen from which to develop a model that could determine the flow conditions within a thin layer near the vessel wall using information from the interior conditions provided by a CFD calculation of the complete digester. The other conditions will be determined by coupled solutions of the wood chip, heat, and chemical species transport and chemical reactions. The NWM was to couple with a digester performance code in an iterative fashion to provide more detailed information about the conditions within the NW region. Process Simulations, Ltd (PSL) is developing the digester performance code. This more detailed (and perhaps more accurate) information from the NWM was to provide an estimate of the conditions that could aggravate the corrosion at the wall. It is intended that this combined tool (NWM-PSL) could be used to understand conditions at/near the wall in order to develop methods to reduce the corrosion. However, development and testing of the NWM flow model took longer than anticipated and the other developments (energy and species transport, chemical reactions and linking with the PSL code) were not completed. The development and testing of the NWM are described in this report. In addition, the investigation of the potential effects of a clear layer (layer reduced in concentration of wood chips) near the wall is reported in Appendix D. The existence of a clear layer was found to enhance the flow near the wall.

Giles, GE

2003-09-18T23:59:59.000Z

264

Standing gravitational waves from domain walls  

SciTech Connect (OSTI)

We construct a plane symmetric, standing gravitational wave for a domain wall plus a massless scalar field. The scalar field can be associated with a fluid which has the properties of 'stiff' matter, i.e., matter in which the speed of sound equals the speed of light. Although domain walls are observationally ruled out in the present era, the solution has interesting features which might shed light on the character of exact nonlinear wave solutions to Einstein's equations. Additionally this solution may act as a template for higher dimensional 'brane-world' model standing waves.

Gogberashvili, Merab [Andronikashvili Institute of Physics, 6 Tamarashvili Street, Tbilisi 0177 (Georgia); Javakhishvili Tbilisi State University, 3 Chavchavadze Avenue, Tbilisi 0128 (Georgia); California State University, Fresno, Physics Department, Fresno, California 93740-8031 (United States); Myrzakul, Shynaray [Department of General and Theoretical Physics, Gumilev Eurasian National University, Astana, 010008 (Kazakhstan); California State University, Fresno, Physics Department, Fresno, California 93740-8031 (United States); Singleton, Douglas [California State University, Fresno, Physics Department, Fresno, California 93740-8031 (United States); Institute of Gravitation and Cosmology, Peoples' Friendship University of Russia, Moscow 117198 (Russian Federation)

2009-07-15T23:59:59.000Z

265

Enhancement of wall jet transport properties  

DOE Patents [OSTI]

By enhancing the natural instabilities in the boundary layer and in the free shear layer of a wall jet, the boundary is minimized thereby increasing the transport of heat and mass. Enhancing the natural instabilities is accomplished by pulsing the flow of air that creates the wall jet. Such pulsing of the flow of air can be accomplished by sequentially occluding and opening a duct that confines and directs the flow of air, such as by rotating a disk on an axis transverse to the flow of air in the duct. 17 figs.

Claunch, S.D.; Farrington, R.B.

1997-02-04T23:59:59.000Z

266

Non-Abelian Webs of Walls  

E-Print Network [OSTI]

Domain wall junctions are studied in N=2 supersymmetric U(Nc) gauge theory with Nf(>Nc) flavors. We find that all three possibilities are realized for positive, negative and zero junction charges. The positive junction charge is found to be carried by a topological charge in the Hitchin system of an SU(2) gauge subgroup. We establish rules of the construction of the webs of walls. Webs can be understood qualitatively by grid diagram and quantitatively by associating moduli parameters to web configurations.

Minoru Eto; Youichi Isozumi; Muneto Nitta; Keisuke Ohashi; Norisuke Sakai

2005-09-15T23:59:59.000Z

267

conductivity of Santa Fe Group aquifer systemsediments from the 98th Street core hole. Albuquerque. New Mexico: New  

E-Print Network [OSTI]

systemsediments from the 98th Street core hole. Albuquerque. New Mexico: New Mexico Geology. Vol. 20, pp. 14 Grande Basin, proceedings of the 39th Annual New Mexico Water Conference, Albuquerque. New Mexico. November 3-4.1994: New Mexico Water Re- sources Research Insitute Report No. 200, pp. 37-55. HEYWOOD, C

Haneberg, William C.

268

Parallel session 1b: Promoting green networks and human wellbeing 73 Exploring the role of street trees in the  

E-Print Network [OSTI]

benefits associated with green spaces and street trees, the building blocks of green networks and stakeholder engagement is required for the effective and sustainable implementation of urban greening initiatives, such as the development of green networks. This paper examines the potential relationships

269

STATE OF CALIFORNIA --THE RESOURCES AGENCY Edmund G. Brown Jr., Governor CALIFORNIA ENERGY COMMISSION 1516 Ninth Street Sacramento, California 95814  

E-Print Network [OSTI]

, on paper, and orally at Energy Commission hearings. A. A Brief History of the Energy Commission's BuildingSTATE OF CALIFORNIA -- THE RESOURCES AGENCY Edmund G. Brown Jr., Governor CALIFORNIA ENERGY COMMISSION 1516 Ninth Street Sacramento, California 95814 Main website: www.energy.ca.gov INITIAL STATEMENT

270

STATE OF CALIFORNIA --THE RESOURCES PROVIDER Edmund G. Brown Jr., Governor CALIFORNIA ENERGY COMMISSION 1516 Ninth Street Sacramento, California 95814  

E-Print Network [OSTI]

electronically, on paper, and orally at Energy Commission hearings. A. A Brief History of the Energy Commission1 STATE OF CALIFORNIA -- THE RESOURCES PROVIDER Edmund G. Brown Jr., Governor CALIFORNIA ENERGY COMMISSION 1516 Ninth Street Sacramento, California 95814 Main website: www.energy.ca.gov INITIAL STATEMENT

271

Laboratory Safety 46 Blackstone Street, Cambridge, MA 02139 | T: 617.496.3797 | F: 617.496.5509  

E-Print Network [OSTI]

Aerosol-proof rotors and safety cups for centrifuges Other safety equipment 8 Safe work Practices and PPE of pertinent federal and state government regulations, information about safe work practices, safety equipmentLaboratory Safety 46 Blackstone Street, Cambridge, MA 02139 | T: 617.496.3797 | F: 617.496.5509 www

272

Department of Population Health Sciences, University of Wisconsin-Madison 610 Walnut Street, 707 WARF, Madison, WI 53726-2397  

E-Print Network [OSTI]

Department of Population Health Sciences, University of Wisconsin-Madison 610 Walnut Street, 707://www.pophealth.wisc.edu UNIVERSITY OF WISCONSIN-MADISON SCHOOL OF MEDICINE AND PUBLIC HEALTH The Philip M. Farrell Population Health Distinguished Alumni Lecture Ann P. O'Rourke, MD, MPH Assistant Professor Surgical Critical Care Director

Scharer, John E.

273

Subscriber access provided by STANFORD UNIV GREEN LIBR Nano Letters is published by the American Chemical Society. 1155 Sixteenth Street  

E-Print Network [OSTI]

conductive electrodes are important components of thin-film solar cells, light-emitting diodes, and many-to-roll processed solar cells and large- area organic light-emitting diodes (LEDs) for lighting applications.1 When Chemical Society. 1155 Sixteenth Street N.W., Washington, DC 20036 Letter Solution-Processed Metal Nanowire

Cui, Yi

274

Legal Business Name and DBA Name (as applicable) Permanent Business Address (number & street or P.O. Box) (Required)  

E-Print Network [OSTI]

Legal Business Name and DBA Name (as applicable) Permanent Business Address (number & street or P) Permanent Remittance (Address (if different from Business Address) (Required) City, State and Zip code Email, Santa Cruz Payee Setup Request (204) Required in lieu of IRS W-9 when doing business with the State

California at Santa Cruz, University of

275

Subscriber access provided by DUKE UNIV ACS Nano is published by the American Chemical Society. 1155 Sixteenth Street  

E-Print Network [OSTI]

and chromatography are avail- able merely for small-scale samples. Strong acid purification works effectively- ability. For large-scale purification, gas phase oxidation is very attractive since it is simple to scale. 1155 Sixteenth Street N.W., Washington, DC 20036 Articles Room Temperature Purification of Few

Liu, Jie

276

Radiological survey results at 30 Cliff Street, Beverly, Massachusetts (VB022)  

SciTech Connect (OSTI)

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 30 Cliff Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan, a beta-gamma scan of paved areas, and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines. The radionuclide distributions were not significantly different from typical background levels in the Beverly, Massachusetts, area.

Foley, R.D.; Johnson, C.A.

1992-07-01T23:59:59.000Z

277

METEOROLOGICAL Journal of Climate  

E-Print Network [OSTI]

AMERICAN METEOROLOGICAL SOCIETY Journal of Climate EARLY ONLINE RELEASE This is a preliminary PDF it is available. © 201 American Meteorological Society1 #12;Sun et al. climate downscaling of the Australian currents 1 Marine downscaling of a future climate scenario for Australian boundary currents Chaojiao Sun

Feng, Ming

278

Hot wire production of single-wall and multi-wall carbon nanotubes  

DOE Patents [OSTI]

Apparatus (210) for producing a multi-wall carbon nanotube (213) may comprise a process chamber (216), a furnace (217) operatively associated with the process chamber (216), and at least one filament (218) positioned within the process chamber (216). At least one power supply (220) operatively associated with the at least one filament (218) heats the at least one filament (218) to a process temperature. A gaseous carbon precursor material (214) operatively associated with the process chamber (216) provides carbon for forming the multi-wall carbon nanotube (213). A metal catalyst material (224) operatively associated with the process (216) catalyzes the formation of the multi-wall carbon nanotube (213).

Dillon, Anne C. (Boulder, CO); Mahan, Archie H. (Golden, CO); Alleman, Jeffrey L. (Lakewood, CO)

2010-10-26T23:59:59.000Z

279

Subcooled Boiling Near a Heated Wall  

SciTech Connect (OSTI)

Experimental measurements of void fraction, bubble frequency, and velocity are obtained in subcooled R-134a flowing over a heated flat plate near an unheated wall and compared to analytical predictions. The measurements were obtained for a fixed system pressure and mass flow rate (P = 2.4 MPa and w = 106 kg/hr) at various inlet liquid temperatures. During the experiments, electrical power was applied at a constant rate to one side of the test section. The local void fraction data, acquired with a hot-film anemometer probe, showed the existence of a significant peak near the heated wall and a smaller secondary peak near the unheated wall for the larger inlet subcoolings. Local vapor velocity data, taken with the hot-film probe and a laser Doppler velocimeter, showed broad maxima near the centerline between the heated and unheated plates. Significant temperature gradients near the heated wall were observed for large inlet subcooling. Bubble size data, inferred from measurements of void fraction, bubble frequency and vapor velocity, when combined with the measured bubble chord length distributions illustrate the transition from pure three dimensional spherical to two-dimensional planar bubble flow, the latter being initiated when the bubbles fill the gap between the plates. These various two-phase flow measurements were used for development of a multidimensional, four-field calculational method; comparisons of the data to the calculations show reasonable agreement.

T.A. Trabold; C.C. Maneri; P.F. Vassallo; D.M. Considine

2000-10-27T23:59:59.000Z

280

Annual Report Diana H. Wall, Director  

E-Print Network [OSTI]

Student Sustainability Center more than doubled its student engagement, and our pre-college Summer2013-2014 Annual Report #12;Diana H. Wall, Director CSU is at the forefront of sustainability if such systems are to endure, and developing the expertise that is needed to shape a sustainable future

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Domain wall partition functions and KP  

E-Print Network [OSTI]

We observe that the partition function of the six vertex model on a finite square lattice with domain wall boundary conditions is (a restriction of) a KP tau function and express it as an expectation value of charged free fermions (up to an overall normalization).

O Foda; M Wheeler; M Zuparic

2009-01-15T23:59:59.000Z

282

Design of wetted wall bioaerosol concentration cyclones  

E-Print Network [OSTI]

...................................................................................... 24 Aerosol-to-aerosol collection efficiency.................................................... 24 Wetting pattern on the impacting wall ? effect of an atomizer.................. 24..................................................................................... 67 Figure 3.4. Cold temperature experiemental setup ........................................................... 68 Figure 3.5. Preliminary heating system for the 1250 L/min cyclone and thermo-couple locations...

Seo, Youngjin

2009-05-15T23:59:59.000Z

283

THE CHINESE WALL LATTICE Ravi Sandhu  

E-Print Network [OSTI]

security policy for confidentiality · Mixture of free choice (discretionary) and mandatory of interest class #12;4 CHINESE WALL EXAMPLE BANKS OIL COMPANIESBANKS OIL COMPANIES A B X Y #12;5 READ ACCESS BREWER-NASH SIMPLE SECURITY S can read O only if · O is in the same company dataset as· O is in the same

Sandhu, Ravi

284

Climbing Wall Climbing Wall PoliciesURWC and St Paul Gym  

E-Print Network [OSTI]

a belay/lead qualification card visible on their harness and have passed the qualification test. Climbers may use personal climbing equipment (harness, belay device, etc.) at the wall. Old or worn equipment

Amin, S. Massoud

285

Journal of Animal Ecology 2007  

E-Print Network [OSTI]

Journal of Animal Ecology 2007 76, 1045­1052 © 2007 The Authors. Journal compilation © 2007 British Ecological Society Blackwell Publishing Ltd Climatechangecanaltercompetitiverelationshipsbetween resident and migratory birds MARKUS P. AHOLA, TONI LAAKSONEN, TAPIO EEVA and ESA LEHIKOINEN Section of Ecology

Laaksonen, Toni

286

Journal of Applied Ecology 2004  

E-Print Network [OSTI]

Journal of Applied Ecology 2004 41, 922­933 © 2004 British Ecological Society Blackwell Publishing that might guide management decisions. We tested whether ideas from landscape ecology (local vs. landscape-scale, Sacramento River, succession, vegetation Journal of Applied Ecology (2004) 41, 922­933 Introduction More than

Holl, Karen

287

Journal of Animal Ecology 2004  

E-Print Network [OSTI]

Journal of Animal Ecology 2004 73, 342¬≠352 ¬© 2004 British Ecological Society Blackwell Publishing VALKAMA and VILLE P√?YRI Section of Ecology, Department of Biology, University of Turku, FIN-20014 Turku, reproductive value, sex allocation, sex-dependent mortality, varia- ble environment. Journal of Animal Ecology

Laaksonen, Toni

288

Journal of Applied Ecology 2006  

E-Print Network [OSTI]

Journal of Applied Ecology 2006 43, 377≠384 © 2006 The Authors. Journal compilation © 2006 British Ecological Society Blackwell Publishing Ltd METHODOLOGICAL INSIGHTS Point transect sampling with traps, Etive House, Beechwood Park, Inverness IV2 3BW, UK Summary 1. The ability to monitor abundance of animal

Thomas, Len

289

Inter-Faculty Digital Journalism  

E-Print Network [OSTI]

Inter-Faculty Digital Journalism As media migrate to digital platforms, this has created a need, alternative and citizen media. A Rigorous, Enriching Program UWindsor's Digital Journalism program unites changing digital marketplace. Our objective is to produce journalists who can find work in mainstream

290

Engineering the fusion reactor first wall  

SciTech Connect (OSTI)

Recently the National Academy of Engineering published a set of Grand Challenges in Engineering in which the second item listed was entitled 'Provide energy from fusion'. Clearly a key component of this challenge is the science and technology associated with creating and maintaining burning plasmas. This is being vigorously addressed with both magnetic and inertial approaches with various experiments such as ITER and NIF. Considerably less attention is being given to another key component of this challenge, namely engineering the first wall that will contain the burning plasma. This is a daunting problem requiring technologies and materials that can not only survive, but also perform multiple essential functions in this extreme environment. These functions are (1) shield the remainder of the device from radiation. (2) convert of neutron energy to useful heat and (3) breed and extract tritium to maintain the reactor fuel supply. The first wall must not contaminate the plasma with impurities. It must be infused with cooling to maintain acceptable temperatures on plasma facing and structural components. It must not degrade. It must avoid excessive build-up of tritium on surfaces, and, if surface deposits do form, must be receptive to cleaning techniques. All these functions and constraints must be met while being subjected to nuclear and thermal radiation, particle bombardment, high magnetic fields, thermal cycling and occasional impingement of plasma on the surface. And, operating in a nuclear environment, the first wall must be fully maintainable by remotely-operated manipulators. Elements of the first wall challenge have been studied since the 1970' s both in the US and internationally. Considerable foundational work has been performed on plasma facing materials and breeding blanket/shield modules. Work has included neutronics, materials fabrication and joining, fluid flow, tritium breeding, tritium recovery and containment, energy conversion, materials damage and magnetohydrodynamics. While work to date has been quite valuable, no blanket concept has been built and operated in anything approaching a realistic fusion reactor environment. Rather, work has been limited to isolated experiments on first wall components and paper studies. The need now is to complete necessary R&D on first wall components, assemble components into a practical design, and test the first wall in a realistic fusion environment. Besides supporting work, major prototype experiments could be performed in non-nuclear experiments, as part of the ITER project and as part of the Component Test Facility. The latter is under active consideration and is a proposed machine which would use a driven plasma to expose an entire first wall to a fusion environment. Key US contributors to first wall research have been UCLA, UCSD, U of Wisconsin, LANL, ORNL, PNNL, Argonne and Idaho National Lab. Current efforts have been coordinated by UCLA. It is recognized that when this work progresses to a larger scale, leadership from a national laboratory will be required. LANL is well-prepared to provide such leadership.

Wurden, Glen [Los Alamos National Laboratory; Scott, Willms [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

291

TBU-0061- In the Matter of Misti Wall  

Broader source: Energy.gov [DOE]

Misti Wall (the complainant or Wall), appeals the dismissal of her complaint of retaliation filed under 10 C.F.R. Part 708, the Department of Energy (DOE) Contractor Employee Protection Program. As...

292

After Exodus : re-occupation of the metropolitan wall  

E-Print Network [OSTI]

The title "Exodus alludes to a restricted exclave encircled by a forbidding wall -- effect, a prison on the scale of a metropolis, and one in which people sought refuge voluntarily. Over the past forty years, similar walls ...

Allison, Jordan Lloyd Norman

2012-01-01T23:59:59.000Z

293

Modeling Left Ventricle Wall Motion Using Tagged Magnetic Resonance Imaging  

E-Print Network [OSTI]

A two-parameter computational model is proposed for the study of the regional motion of the left ventricle (LV) wall using tagged magnetic resonance imaging (tMRI) data. In this model, the LV wall motion is mathematically ...

Alenezy, Mohammed D.

2009-04-17T23:59:59.000Z

294

Electrical signature of magnetic domain-wall dynamics  

E-Print Network [OSTI]

Current-induced domain-wall dynamics is studied in a thin ferromagnetic nanowire. The domain-wall dynamics is described by simple equations with four parameters. We propose a procedure to unambiguously determine these parameters by all...

Liu, Y.; Tretiakov, O. A.; Abanov, Artem.

2011-01-01T23:59:59.000Z

295

Measurement of genotoxic air pollutant exposures in street vendors and school children in and near Bangkok  

SciTech Connect (OSTI)

The effects of air pollution on human health are a great concern, particularly in big cities with severe traffic problems such as Bangkok, Thailand. In this study, exposure to genotoxic compounds in ambient air was studied by analysis of particle-associated polycyclic aromatic hydrocarbons (PAHs) and benzene through direct measurement of concentrations in air as well as through the use of different biomarkers of exposure: urinary 1-hydroxypyrene (1-OHP) for PAHs and urinary t,t-muconic acid (t,t-MA) for benzene. The study was conducted in various susceptible groups of the population with different occupations in 5 traffic-congested areas of Bangkok, as well as in primary school children. The level of total PAHs on the main roads at various sites ranged from 7.10 to 83.04 ng/m{sup 3}, while benzene levels ranged from 16.35 to 49.25 ppb. In contrast, ambient levels in nearby temples, the control sites, ranged from 1.67 to 3.04 ng/m{sup 3} total PAHs and 10.16 to 16.25 ppb benzene. Street vendors selling clothes were exposed to 16.07 {+-} 1.64 ng/m{sup 3} total PAHs and 21.97 {+-} 1.50 ppb benzene, levels higher than in monks and nuns residing in nearby temples (5.34 {+-} 0.65 ng/m{sup 3} total PAHs and 13.69 {+-} 0.77 ppb benzene). Grilled-meat vendors in the same area were exposed to both total PAHs and benzene at even higher levels, possibly due to additional formation of PAHs during the grilling of meat (34.27 {+-} 7.02 ng/m{sup 3} total PAHs; 27.49 {+-} 2.72 ppb benzene). At the end of the workday, urinary 1-OHP levels in street vendors (0.12 and 0.15 {mu}mol/mol creatinine in clothes and grilled-meat vendors, respectively) were significantly higher than in controls (0.04 {mu}mol/mol creatinine; P < 0.01). Afternoon urinary t,t-MA levels in both groups of street vendors (0.12 mg/g creatinine) were also significantly higher than in controls (0.08 mg/g creatinine; P < 0.05). School children from two schools in Bangkok were exposed to total PAHs and benzene at levels of 6.70 {+-} 0.47 ng/m{sup 3} and 4.71 {+-} 0.25 ppb, respectively, higher than those to which children living outside the city were exposed (1.25 {+-} 0.24 ng/m{sup 3} total PAHs; 2.10 {+-} 0.16 ppb benzene). At the end of the school day, levels of urinary 1-OHP and t,t-MA were significantly higher (P < 0.001 and P < 0.01, respectively) in Bangkok school children (0.23 {mu}mol/mol creatinine and 0.27 mg/g creatinine, respectively) than in school children from outside Bangkok (0.10 {mu}mol/mol creatinine and 0.08 mg/g creatinine, respectively)

Ruchirawat, Mathuros [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand) and Department of Pharmacology, Faculty of Science, Mahidol University, Bangkok 10400 (Thailand)]. E-mail: mathuros@tubtim.cri.or.th; Navasumrit, Panida [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand); Settachan, Daam [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand); Tuntaviroon, Jantamas [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand); Buthbumrung, Nantaporn [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand); Sharma, Suman [Laboratory of Environmental Toxicology, Chulabhorn Research Institute, Bangkok 10210 (Thailand)

2005-08-07T23:59:59.000Z

296

High Performance Walls in Hot-Dry Climates  

SciTech Connect (OSTI)

High performance walls represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. The primary goal in improving wall thermal performance revolves around increasing the wall framing from 2x4 to 2x6, adding more cavity and exterior rigid insulation, achieving insulation installation criteria meeting ENERGY STAR's thermal bypass checklist, and reducing the amount of wood penetrating the wall cavity.

Hoeschele, M.; Springer, D.; Dakin, B.; German, A.

2015-01-01T23:59:59.000Z

297

Enhanced dielectric-wall linear accelerator  

DOE Patents [OSTI]

A dielectric-wall linear accelerator is enhanced by a high-voltage, fast e-time switch that includes a pair of electrodes between which are laminated alternating layers of isolated conductors and insulators. A high voltage is placed between the electrodes sufficient to stress the voltage breakdown of the insulator on command. A light trigger, such as a laser, is focused along at least one line along the edge surface of the laminated alternating layers of isolated conductors and insulators extending between the electrodes. The laser is energized to initiate a surface breakdown by a fluence of photons, thus causing the electrical switch to close very promptly. Such insulators and lasers are incorporated in a dielectric wall linear accelerator with Blumlein modules, and phasing is controlled by adjusting the length of fiber optic cables that carry the laser light to the insulator surface. 6 figs.

Sampayan, S.E.; Caporaso, G.J.; Kirbie, H.C.

1998-09-22T23:59:59.000Z

298

Gravitational infall in the hard wall model  

E-Print Network [OSTI]

An infalling shell in the hard wall model provides a simple holographic model for energy injection in a confining gauge theory. Depending on its parameters, a scalar shell either collapses into a large black brane, or scatters between the hard wall and the anti-de Sitter boundary. In the scattering regime, we find numerical solutions that keep oscillating for as long as we have followed their evolution, and we provide an analytic argument that shows that a black brane can never be formed. This provides examples of states in infinite-volume field theory that never thermalize. We find that the field theory expectation value of a scalar operator keeps oscillating, with an amplitude that undergoes modulation.

B. Craps; E. J. Lindgren; A. Taliotis; J. Vanhoof; H. Zhang

2014-12-15T23:59:59.000Z

299

Proposal on Lithium Wall Experiment (LWX) on PBXM 1  

E-Print Network [OSTI]

Proposal on Lithium Wall Experiment (LWX) on PBX­M 1 Leonid E. Zakharov, Princeton University; OUTLINE 1. Mini­conference on Lithium walls and low recycling regime. 2. PBX­M Capabilities. 3. Motivation "Lithium covered walls and low recycling regimes in toka­ maks". APS meeting, October 23­27, 2000, Quebec

Zakharov, Leonid E.

300

Manipulation and Imaging of Individual Single-Walled Carbon Nanotubes  

E-Print Network [OSTI]

Manipulation and Imaging of Individual Single-Walled Carbon Nanotubes with an Atomic Force Microscope** By Henk W. C. Postma, Allard Sellmeijer, and Cees Dekker* Carbon nanotubes[1] have attracted-walled nanotubes,[3¬Ī5] the prototype single-walled tubes are much more difficult to study since their diameter

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Building Cathedrals and Breaking down Reinforced Concrete Walls  

E-Print Network [OSTI]

Building Cathedrals and Breaking down Reinforced Concrete Walls Michel Brou¬īe Institut Henri distinction between great mathematicians Concrete walls breakers Michel Brou¬īe (Institut Henri Poincar¬īe) John Concrete walls breakers Cathedrals builders Michel Brou¬īe (Institut Henri Poincar¬īe) John Thompson

Broué, Michel - Institut de Mathématiques de Jussieu, Université Paris 7

302

Designing Precast Concrete Cross Wall Joints Against Progressive Collapse  

E-Print Network [OSTI]

Designing Precast Concrete Cross Wall Joints Against Progressive Collapse Researcher: Mohamad concrete cross wall constructions. Ronan Point Collapse (http://en.wikipedia.org/wiki/Ronan_Point) #12;Due gap is listed as follows: · Limited number of studies for designing precast concrete cross wall

Birmingham, University of

303

Brick Walls and AdS/CFT  

E-Print Network [OSTI]

We discuss the relationship between the bulk-boundary correspondence in Rehren's algebraic holography (and in other 'fixed-background' approaches to holography) and in mainstream 'Maldacena AdS/CFT'. Especially, we contrast the understanding of black-hole entropy from the viewpoint of QFT in curved spacetime -- in the framework of 't Hooft's 'brick wall' model -- with the understanding based on Maldacena AdS/CFT. We show that the brick-wall modification of a Klein Gordon field in the Hartle-Hawking-Israel state on 1+2-Schwarzschild AdS (BTZ) has a well-defined boundary limit with the same temperature and entropy as the brick-wall-modified bulk theory. One of our main purposes is to point out a close connection, for general AdS/CFT situations, between the puzzle raised by Arnsdorf and Smolin regarding the relationship between Rehren's algebraic holography and mainstream AdS/CFT and the puzzle embodied in the 'correspondence principle' proposed by Mukohyama and Israel in their work on the brick-wall approach to black hole entropy. Working on the assumption that similar results will hold for bulk QFT other than the Klein Gordon field and for Schwarzschild AdS in other dimensions, and recalling the first author's proposed resolution to the Mukohyama-Israel puzzle based on his 'matter-gravity entanglement hypothesis', we argue that, in Maldacena AdS/CFT, the algebra of the boundary CFT is isomorphic only to a proper subalgebra of the bulk algebra, albeit (at non-zero temperature) the (GNS) Hilbert spaces of bulk and boundary theories are still the 'same' -- the total bulk state being pure, while the boundary state is mixed (thermal). We also argue from the finiteness of its boundary (and hence, on our assumptions, also bulk) entropy at finite temperature, that the Rehren dual of the Maldacena boundary CFT cannot itself be a QFT and must, instead, presumably be something like a string theory.

Bernard S. Kay; L. Ortiz

2014-05-22T23:59:59.000Z

304

Hollow clay tile wall program summary report  

SciTech Connect (OSTI)

Many of the Y-12 Plant buildings, constructed during the 1940s and 1950s, consist of steel ed concrete framing infilled with hollow clay tile (HCT). The infill was intended to provide for building enclosure and was not designed to have vertical or lateral load-carrying capacity. During the late 1970s and early 1980s, seismic and wind evaluations were performed on many of these buildings in conjunction with the preparation of a site-wide safety analysis report. This analytical work, based on the best available methodology, considered lateral load-carrying capacity of the HCT infill on the basis of building code allowable shear values. In parallel with the analysis effort, DOE initiated a program to develop natural phenomena capacity and performance criteria for existing buildings, but these criteria did not specify guidelines for determining the lateral force capacity of frames infilled with HCT. The evaluation of infills was, therefore, based on the provisions for the design of unreinforced masonry as outlined in standard masonry codes. When the results of the seismic and wind evaluations were compared with the new criteria, the projected building capacities fell short of the requirements. Apparently, if the buildings were to meet the new criteria, many millions of dollars would be required for building upgrades. Because the upgrade costs were significant, the assumptions and approaches used in the analyses were reevaluated. Four issues were identified: (1) Once the infilled walls cracked, what capacity (nonlinear response), if any, would the walls have to resist earthquake or wind loads applied in the plane of the infill (in-plane)? (2) Would the infilled walls remain within the steel or reinforced concrete framing when subjected to earthquake or high wind loads applied perpendicular to the infill (out-of-plane)? (3) What was the actual shear capacity of the HCT infill? (4) Was modeling the HCT infill as a shear wall the best approach?

Henderson, R.C.; Jones, W.D. [Gilbert/Commonwealth, Inc., Oak Ridge, TN (United States); Beavers, J.E. [MS Technology, Inc. (United States)

1995-07-30T23:59:59.000Z

305

Conserved currents for Mobius Domain Wall Fermions  

E-Print Network [OSTI]

We derive the exactly conserved vector, and almost conserved axial currents for rational approximations to the overlap operator with a general Mobius kernel. The approach maintains manifest Hermiticity, and allows matrix elements of the currents to be constructed at no extra cost after solution of the usual 5d system of equations, similar to the original approach of Furman and Shamir for domain wall Fermions.

P. A. Boyle

2014-11-20T23:59:59.000Z

306

1993 NEC 1) (Single-Walled Carbon  

E-Print Network [OSTI]

MWNT (Vapor-grown carbon fiber, VGCF)33) 10001300 34) SWNT CCVD Smalley 15) CO SWNT SWNT 1993 NEC 1) (Single-Walled Carbon Nanotubes, SWNTs) 1(a) 1nm ¬Ķm ¬Ķm SWNTs 2) (MWNTs) 1(c 29,30,35-41) SWNT , MgO Fe/Co, Ni/Co, Mo/Co nm SWNT VGCF Fe(CO)5 SWNT Ethanol tank Hot

Maruyama, Shigeo

307

Phenomenology of Wall Bounded Newtonian Turbulence  

E-Print Network [OSTI]

We construct a simple analytic model for wall-bounded turbulence, containing only four adjustable parameters. Two of these parameters characterize the viscous dissipation of the components of the Reynolds stress-tensor and other two parameters characterize their nonlinear relaxation. The model offers an analytic description of the profiles of the mean velocity and the correlation functions of velocity fluctuations in the entire boundary region, from the viscous sub-layer, through the buffer layer and further into the log-layer. As a first approximation, we employ the traditional return-to-isotropy hypothesis, which yields a very simple distribution of the turbulent kinetic energy between the velocity components in the log-layer: the streamwise component contains a half of the total energy whereas the wall-normal and the cross-stream components contain a quarter each. In addition, the model predicts a very simple relation between the von-K\\'arm\\'an slope $\\kappa $ and the turbulent velocity in the log-law region $v^+$ (in wall units): $v^+=6 \\kappa$. These predictions are in excellent agreement with DNS data and with recent laboratory experiments.

Victor S. L'vov; Anna Pomyalov; Itamar Procaccia; Sergej S. Zilitinkevich

2005-06-28T23:59:59.000Z

308

ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS  

SciTech Connect (OSTI)

OAK A271 ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS. First wall and blanket (FW/blanket) design is a crucial element in the performance and acceptance of a fusion power plant. High temperature structural and breeding materials are needed for high thermal performance. A suitable combination of structural design with the selected materials is necessary for D-T fuel sufficiency. Whenever possible, low afterheat, low chemical reactivity and low activation materials are desired to achieve passive safety and minimize the amount of high-level waste. Of course the selected fusion FW/blanket design will have to match the operational scenarios of high performance plasma. The key characteristics of eight advanced high performance FW/blanket concepts are presented in this paper. Design configurations, performance characteristics, unique advantages and issues are summarized. All reviewed designs can satisfy most of the necessary design goals. For further development, in concert with the advancement in plasma control and scrape off layer physics, additional emphasis will be needed in the areas of first wall coating material selection, design of plasma stabilization coils, consideration of reactor startup and transient events. To validate the projected performance of the advanced FW/blanket concepts the critical element is the need for 14 MeV neutron irradiation facilities for the generation of necessary engineering design data and the prediction of FW/blanket components lifetime and availability.

WONG, CPC; MALANG, S; NISHIO, S; RAFFRAY, R; SAGARA, S

2002-04-01T23:59:59.000Z

309

Heat transfer and friction in a square channel with one-wall or two-wall rib turbulators  

E-Print Network [OSTI]

walls 83 66 Ribbed side Nusselt number ratio versus friction factor ratio for broken ribs on one wall 84 67 Smooth side Nusselt number ratio versus friction factor ratio for broken ribs on one wall . , 68 Ribbed side Nusselt number ratio versus... on one wall . 95 96 97 INTRODUCTION Early heat transfer study shows that roughening the surface is an effective way to enhance the heat transfer from a surface. Modern turbine design applies turbulence promoters/ribs inside cooling passages...

Huang, Jie Joy

1991-01-01T23:59:59.000Z

310

Accommodate street vendors during the urban development process : with two empirical cases of Zhu Lian (ZL), and Guan Dong (GD) public markets in Hsinchu City, Taiwan  

E-Print Network [OSTI]

Every day, the recurring scene of conflict between street vendors and municipal authorities can be found in virtually every major city around the world. Through licensing, zoning, or relocating, municipal governments devise ...

Weng, Chia Yang

2013-01-01T23:59:59.000Z

311

200 Seeley W. Mudd Building Mail Code 4701 500 West 120th Street New York, NY 10027 212-854-4458 Fax 212-854-8257  

E-Print Network [OSTI]

200 Seeley W. Mudd Building Mail Code 4701 500 West 120th Street New York, NY 10027 212 rooms are subject to state sales tax, city occupancy tax, and NYS hotel unit fee. Weekend rates may run

Columbia University

312

UNIVERSITY OF CALIFORNIA, SANTA CRUZ STUDENT HEALTH CENTER MEDICAL RECORDS 1156 HIGH STREET, SANTA CRUZ, CA 95064 TEL: (831) 459-3063 FAX: (831) 459-3546  

E-Print Network [OSTI]

UNIVERSITY OF CALIFORNIA, SANTA CRUZ STUDENT HEALTH CENTER MEDICAL RECORDS 1156 HIGH STREET, SANTA FOR RELEASE OF HEALTH INFORMATION AUTHORIZATION FOR RELEASE OF HEALTH INFORMATION Please Complete All Fields please specify: _______________________________________________________________ Please specify the health

California at Santa Cruz, University of

313

Energy and Society ER100/PPC184/ER200/PPC284, Fall 2014  

E-Print Network [OSTI]

of the process. If the article comes from New York Times, Wall Street Journal, Economist, Time, etc Timeliness1 Energy and Society ER100/PPC184/ER200/PPC284, Fall 2014 Problem Set #2 Total Points: 100 for ER100/PPC184 120 for ER200/PPC284 Topics covered: Energy and development, Combustion, Exponential growth

Kammen, Daniel M.

314

Duke's Tom Katsouleas, Olin's Robert Miller, and USC's Yannis Yortsos  

E-Print Network [OSTI]

critical opportunities for engineers and others such as making solar energy economical, providing access covered overseas. Vest was disappointed with the media response to the challenges, especially in light in the New York Times or Wall Street Journal or Washington Post that says engineering is pushing forward

Valero-Cuevas, Francisco

315

Beyond Google: Companies, Industries and Research using the Library November 2010  

E-Print Network [OSTI]

Guide. In Factiva, select Companies/Markets tab, then Company. Search by company name for a report which, industry and trade. It also has fulltext of The Wall Street Journal. Search by company name using the Company/Org option in the dropdown menu next to the search box to retrieve articles about a company from

Abolmaesumi, Purang

316

Beyond Google: Companies, Industries and Research using the Library November 2011  

E-Print Network [OSTI]

, select Companies/Markets tab, then Company. Search by company name for a report which includes, industry and trade. It also has fulltext of The Wall Street Journal. Search by company name using the Company/Org option in the dropdown menu next to the search box to retrieve articles about a company from

Abolmaesumi, Purang

317

Poisson Mixtures Kenneth W. Church  

E-Print Network [OSTI]

structure by allowing the Poisson parameter q to vary over documents subject to a density function f. f other applications of Shannon's theory to introduce a ``bag­of­words'' assumption. But obviously, word Books 1632 Brown Corpus 1645 Wall Street Journal 5600 Associated Press 1994 8514 Associated Press 1987

Church, Kenneth W.

318

Results of the radiological survey at 77 Sinninger Street, Maywood, New Jersey (MJ052)  

SciTech Connect (OSTI)

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally {sup 232}Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 77 Sinninger Street, Maywood, New Jersey (MJ052), was conducted on December 17, 1992. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area.

Foley, R.D.; Brown, K.S.

1993-06-01T23:59:59.000Z

319

The pattern of xylan acetylation suggests xylan may interact with cellulose microfibrils as a two-fold helical screw in the secondary plant cell wall of Arabidopsis thaliana.  

E-Print Network [OSTI]

and fungi. They will also impact strategies to improve lignocellulose processing for biorefining and bioenergy. Page 4 of 64 SUBMITTED MANUSCRIPT The Plant Journal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33... architecture of secondary cell walls will therefore be invaluable for the food, construction, paper and bioenergy sectors. The functions and pattern of decorations on the xylan backbone are still not fully clear. The xylan backbone, composed of ?-(1...

Busse-Wicher, Marta; Gomes, Thiago C. F.; Tryfona, Theodora; Nikolovski, Nino; Stott, Katherine; Grantham, Nicholas J.; Bolam, David N.; Skaf, Munir S.; Dupree, Paul D.

2014-06-02T23:59:59.000Z

320

Effect of elasticity of wall on diffusion in nano channel  

SciTech Connect (OSTI)

Confining walls of nano channel are taken to be elastic to study their effect on the diffusion coefficient of fluid flowing through the channel. The wall is elastic to the extent that it responses to molecular pressure exerted by fluid. The model to study diffusion is based on microscopic considerations. Results obtained for fluid confining to 20 atomic diameter width contrasted with results obtained by considering rigid and smooth wall. The effect of roughness of wall on diffusion can be compensated by the elastic property of wall.

Tankeshwar, K., E-mail: tankesh@pu.ac.in [Computer Centre, Panjab University Chandigarh,- 160014 (India); Srivastava, Sunita [Department of Physics, Panjab University, Chandigarh 160014 (India)

2014-04-24T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A Study of the Filling of Wall Cavities With Retrofit Wall Insulation.  

SciTech Connect (OSTI)

The Pacific Northwest Power Marketing Agency, the Bonneville Power Administration (BPA), conducted a retrofit wall insulation study to determine the effects of various obstructions within a wall cavity, where voids are likely to occur, and preferred filling methods and material types. The insulation test structure was composed of four 8-foot /times/ 12-foot walls, and was built using standard construction practices. The inside walls were clear plastic glazing, instead of gypsum board, to enable viewing of the filling process. A total of eight tests were performed: four cellulose, two rockwool, and two fiberglass. One- and two-hole filling methods were observed. All insulations were found to perform in the same basic manner with all experiencing the same problem areas. Common installer problems were empty spaces at the tops of cavities and missed cavities, especially above headers. Wiring and lath and plaster consistently caused reduced insulation densities in cavities. The problems with wiring, lath and plaster, and other features in the wall cavities were avoided with the use of a filler tube. The filler tube also provided a more consistent fill along the length of the entire cavity. 2 figs., 3 tabs.

Flores, Joseph A.; Grill, Alan R.

1988-08-01T23:59:59.000Z

322

Control of magnetohydrodynamic modes with a resistive wall above the wall stabilization limit  

SciTech Connect (OSTI)

Studies are shown of control of magnetohydrodynamic (MHD) modes in the presence of a resistive wall, below and above the regime for which stabilization is possible with a perfectly conducting wall, i.e., in and above the ideal wall limit. The results show that resistive plasma (tearing-like) modes can be feedback stabilized for current profiles which are unstable above the ideal wall limit, both for tokamak-like and reversed field pinch (RFP)-like profiles. However, above the limit for wall stabilization of ideal plasma modes, resonant or nonresonant, the feedback scheme cannot provide stabilization. The control scheme senses both normal and tangential components of the perturbed magnetic field, and the feedback is proportional to a linear combination of the two. Neither plasma rotation nor complex gain is included. A cylindrical reduced MHD model, in resistive or ideal form, is used, with tokamak-like profiles [increasing profile of q(r)] or RFP-like profiles [decreasing q(r)]. The possible relevance to RFPs and tokamaks is discussed.

Finn, John M. [T-15, Plasma Theory, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

2006-08-15T23:59:59.000Z

323

Results of the radiological and beryllium verification survey at the Peek Street Site, Schenectady, New York (SY001V)  

SciTech Connect (OSTI)

At the request of the U.S. Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted an independent verification radiological and non-radioactive beryllium survey at the Peek Street site, located at 425 Peek Street, Schenectady, New York. The purpose of the survey, conducted during 1993 and continuing through January 1994, was to confirm the success of the remedial actions performed to remove any beryllium concentrations or radioactive materials in excess of the identified guidelines. The verification survey included surface gamma scans and gamma readings at one meter indoors and outdoors, alpha and beta scans inside the structure, and the collection of soil, dust and debris samples and smears for radionuclide and beryllium analyses. Results of the survey demonstrated that all radiological and beryllium measurements on the property were within applicable DOE guidelines. Based on all data collected, the industrial property at 425 Peek Street and the adjacent state-owned bike path in Schenectady, New York, conforms to all applicable radiological and non-radioactive beryllium guidelines established for this site by DOE and approved by the State of New York.

Foley, R.D.; Johnson, C.A.; Carrier, R.F.; Allred, J.F.

1994-10-01T23:59:59.000Z

324

Method of non-destructively inspecting a curved wall portion  

DOE Patents [OSTI]

A method of non-destructively inspecting a curved wall portion of a large and thick walled vessel for a defect by computed tomography is provided. A collimated source of radiation is placed adjacent one side of the wall portion and an array of detectors for the radiation is placed on the other side adjacent the source. The radiation from the source passing through the wall portion is then detected with the detectors over a limited angle, dependent upon the curvature of the wall of the vessel, to obtain a dataset. The source and array are then coordinately moved relative to the wall portion in steps and a further dataset is obtained at each step. The plurality of datasets obtained over the limited angle is then processed to produce a tomogram of the wall portion to determine the presence of a defect therein. In a preferred embodiment, the curved wall portion has a center of curvature so that the source and the array are positioned at each step along a respective arc curved about the center. If desired, the detector array and source can be reoriented relative to a new wall portion and an inspection of the new wall portion can be easily obtained. Further, the source and detector array can be indexed in a direction perpendicular to a plane including the limited angle in a plurality of steps so that by repeating the detecting and moving steps at each index step, a three dimensional image can be created of the wall portion.

Fong, James T. (Bethel Park, PA)

1996-01-01T23:59:59.000Z

325

Ideal Magnetohydrodynamics Stability Spectrum with a Resistive Wall  

SciTech Connect (OSTI)

We show that the eigenvalue equations describing a cylindrical ideal magnetophydrodynamicsw (MHD) plasma interacting with a thin resistive wall can be put into the standard mathematical form: ??? = ??? ?. This is accomplished by using a finite element basis for the plasma, and by adding an extra degree of freedom corresponding to the electrical current in the thin wall. The standard form allows the use of linear eigenvalue solvers, without additional interations, to compute the complete spectrum of plasma modes in the presence of a surrounding restrictive wall at arbitrary separation. We show that our method recovers standard results in the limits of (1) an infinitely resistive wall (no wall), and (2) a zero resistance wall (ideal wall).

S.P. Smith and S.C. Jardin

2008-05-22T23:59:59.000Z

326

Metadata Value Chain for Open Access Journals  

E-Print Network [OSTI]

In this session, Holly Mercer presented a case for finding global solutions to improve the metadata that is available for journals, particularly small, independent open access journals. She discussed the scholarly communication lifecycle...

Mercer, Holly; Dyas-Correia, Sharon

2011-01-01T23:59:59.000Z

327

ROMANIAN JOURNAL OF INFORMATION SCIENCE AND TECHNOLOGY  

E-Print Network [OSTI]

ROMANIAN JOURNAL OF INFORMATION SCIENCE AND TECHNOLOGY Volume 10, Number 1, 2007, 67­83 An Analysis

Kuzmanov, Georgi

328

Journals in Flux Peter J. Olver  

E-Print Network [OSTI]

· Michelin Guides to papers on the web · Virtual Journals #12;The Dark Side · Metric manipulation and misuse

Keel, Markus

329

Wall, Pennsylvania: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformationSEDS data JumpWakulla County,Wall, Pennsylvania: Energy Resources

330

Gas turbine bucket wall thickness control  

DOE Patents [OSTI]

A core for use in casting a turbine bucket including serpentine cooling passages is divided into two pieces including a leading edge core section and a trailing edge core section. Wall thicknesses at the leading edge and the trailing edge of the turbine bucket can be controlled independent of each other by separately positioning the leading edge core section and the trailing edge core section in the casting die. The controlled leading and trailing edge thicknesses can thus be optimized for efficient cooling, resulting in more efficient turbine operation.

Stathopoulos, Dimitrios (Glenmont, NY); Xu, Liming (Greenville, SC); Lewis, Doyle C. (Greer, SC)

2002-01-01T23:59:59.000Z

331

Wall System Innovations: Familiar Materials, Better Performance |  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage ¬Ľof| Department of EnergyDepartmentDepartment of Energy Wall System

332

Journal of Applied Ecology 2004  

E-Print Network [OSTI]

by nutrient management. Key-words: common reed, invasive species, nutrient enrichment, wetlands Journal. A single S. pectinata plant was grown with each P. australis. In August 2002, plants were harvested

Anderson, Roger C.

333

ISSN: 2165-7556 Journal of Ergonomics  

E-Print Network [OSTI]

ISSN: 2165-7556 Journal of Ergonomics The International Open Access Journal of Ergonomics Editor-00794925,version2-27Feb2013 Author manuscript, published in "J Ergonomics 3, 1 (2013) 1-8" DOI : 10.4172/2165-7556.1000113 #12;Volume 3 · Issue 1 · 1000113 J Ergonomics ISSN: 2165-7556 JER, an open access journal Research

Paris-Sud XI, Université de

334

ISSN: 2165-7556 Journal of Ergonomics  

E-Print Network [OSTI]

ISSN: 2165-7556 Journal of Ergonomics The International Open Access Journal of Ergonomics Editor;Volume 3 · Issue 1 · 1000113 J Ergonomics ISSN: 2165-7556 JER, an open access journal Research Article Open Access Aykent et al., J Ergonomics 2013, 3:1 http://dx.doi.org/10.4172/2165-7556.1000113 Research

Boyer, Edmond

335

ARM - Campaign Journal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformationbudapest Comments? We would love to heartotdngovInstrumentswrf-chem Comments?Campaign Journal

336

Flame-wall interaction simulation in a turbulent channel flow  

SciTech Connect (OSTI)

The interaction between turbulent premixed flames and channel walls is studied. Combustion is represented by a simple irreversible reaction with a large activation temperature. A low heat release assumption is used, but feedback to the flowfield can be allowed through viscosity changes. The effect of wall distance on local and global flame structure is investigated. Quenching distances and maximum wall heat fluxed computed in laminar cases are compared to DNS results. It is found that quenching distances decrease and maximum heat fluxes increase relative to laminar flame values, scaling with the turbulent strain rate. It is shown that these effects are due to large coherent structures which push flame elements towards the wall. The effect of wall strain in flame-wall interaction is studied in a stagnation line flow; this is used to explain the DNS results. The effects of the flame on the flow through viscosity changes is studied. It is also shown that remarkable flame events are produced by flame interaction with a horseshoe vortex: burned gases are pushed towards the wall at high speed and induce quenching and high wall heat flux while fresh gases are expelled from the wall region and form finger-like structures. Effects of the wall on flame surface density are investigated.

Bruneaux, G.; Akselvoll, K.; Poinsot, T.; Ferziger, J.H.

1996-10-01T23:59:59.000Z

337

Dynamic load test of Arquin-designed CMU wall.  

SciTech Connect (OSTI)

The Arquin Corporation has developed a new method of constructing CMU (concrete masonry unit) walls. This new method uses polymer spacers connected to steel wires that serve as reinforcing as well as a means of accurately placing the spacers so that the concrete block can be dry stacked. The hollows of the concrete block are then filled with grout. As part of a New Mexico Small Business Assistance Program (NMSBA), Sandia National Laboratories conducted a series of tests that dynamically loaded wall segments to compare the performance of walls constructed using the Arquin method to a more traditional method of constructing CMU walls. A total of four walls were built, two with traditional methods and two with the Arquin method. Two of the walls, one traditional and one Arquin, had every third cell filled with grout. The remaining two walls, one traditional and one Arquin, had every cell filled with grout. The walls were dynamically loaded with explosive forces. No significant difference was noted between the performance of the walls constructed by the Arquin method when compared to the walls constructed by the traditional method.

Jensen, Richard Pearson

2010-02-01T23:59:59.000Z

338

Student resistance to journal writing  

E-Print Network [OSTI]

58 60 61 LIST OF TABLES Table 1: Taxonomy. Table 2: Responses to Question Two Table 3: Coding Scheme for Question Three. Table 4: Responses to Question Three Table 5: Responses to Question Four. Table 6: Responses to Question Five. Table 7... of eight content questions about students' attitudes toward and resistance to journal writing. The responses rendered specific details in the following five areas: 1. How many students keep journals without being required, and how students feel about...

Ingram, Gynger Lynne

1991-01-01T23:59:59.000Z

339

Thermal performance of steel-framed walls. Final report  

SciTech Connect (OSTI)

In wall construction, highly conductive members spaced along the wall, which allow higher heat transfer than that through less conductive areas, are referred to as thermal bridges. Thermal bridges in walls tend to increase heat loss and, under certain adverse conditions, can cause dust streaking (``ghosting``) on interior walls over studs due to temperature differentials, as well as condensation in and on walls. Although such adverse conditions can be easily avoided by proper thermal design of wall systems, these effects have not been well understood and thermal data has been lacking. Therefore, the present study was initiated to provide (1) a better understanding of the thermal behavior of steel-framed walls, (2) a set of R-values for typical wall constructions, and (3) information that could be used to develop improved methods of predicting R-values. An improved method for estimating R-value would allow an equitable comparison of thermal performance with other construction types and materials. This would increase the number of alternative materials for walls available to designers, thus allowing them to choose the optimum choice for construction. Twenty-three wall samples were tested in a calibrated hot box (ASTM C9761) to measure the thermal performance of steel-framed wall systems. The tests included an array of stud frame configurations, exterior sheathing and fiberglass batt insulations. Other studies have not included the use of insulating sheathing, which reduces the extent of the thermal bridges and improves total thermal performance. The purpose of the project was to provide measured R-values for commonly used steel-framed wall configurations and to improve R-value estimating methods. Test results were compared to R-value estimates using the parallel path method, the isothermal planes method and the ASHRAE Zone method. The comparison showed that the known procedures do not fully account for the three-dimensional effects created by steel framing in a wall.

Barbour, E. [NAHB Research Center, Inc., Upper Marlboro, MD (United States); Goodrow, J. [Holometrix, Inc., Bedford, MA (United States); Kosny, J.; Christian, J.E. [Oak Ridge National Lab., TN (United States)

1994-11-21T23:59:59.000Z

340

Intense Magnetized Plasma-Wall Interaction  

SciTech Connect (OSTI)

This research project studied wall-plasma interactions relevant to fusion science. Such interactions are a critical aspect of Magneto-Inertial Fusion (MIF) because flux compression by a pusher material, in particular the metal for the liner approach to MIF, involves strong eddy current heating on the surface of the pusher, and probably interactions and mixing of the pusher with the interior fuel during the time when fusion fuel is being burned. When the pusher material is a metal liner, high-energy-density conditions result in fascinating behavior. For example, "warm dense matter" is produced, for which material properties such as resistivity and opacity are not well known. In this project, the transformation into plasma of metal walls subjected to pulsed megagauss magnetic fields was studied with an experiment driven by the UNR 1 MA Zebra generator. The experiment was numerically simulated with using the MHRDR code. This simple, fundamental high-energy-density physics experiment, in a regime appropriate to MIF, has stimulated an important and fascinating comparison of numerical modeling codes and tables with experiment. In addition, we participated in developing the FRCHX experiment to compress a field-reversed-configuration (FRC) plasma with a liner, in collaboration with researchers from Air Force Research Laboratory and Los Alamos National Lab, and we helped develop diagnostics for the Plasma Liner Experiment (PLX) at LANL. Last, but not least, this project served to train students in high-energy-density physics.

Bauer, Bruno S. [UNR] [UNR; Fuelling, Stephan [UNR] [UNR

2013-11-30T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Hollow porous-wall glass microspheres for hydrogen storage  

DOE Patents [OSTI]

A porous wall hollow glass microsphere is provided having a diameter range of between 1 to 200 microns, a density of between 1.0 to 2.0 gm/cc, a porous-wall structure having wall openings defining an average pore size of between 10 to 1000 angstroms, and which contains therein a hydrogen storage material. The porous-wall structure facilitates the introduction of a hydrogen storage material into the interior of the porous wall hollow glass microsphere. In this manner, the resulting hollow glass microsphere can provide a membrane for the selective transport of hydrogen through the porous walls of the microsphere, the small pore size preventing gaseous or liquid contaminants from entering the interior of the hollow glass microsphere.

Heung, Leung K. (Aiken, SC); Schumacher, Ray F. (Aiken, SC); Wicks, George G. (Aiken, SC)

2010-02-23T23:59:59.000Z

342

Physics high-ranking Journals (category 2) Advances in Physics  

E-Print Network [OSTI]

Physics high-ranking Journals (category 2) Advances in Physics Annual Review of Astronomy and Astrophysics Annual Review of Nuclear and Particle Science Applied Physics Letters Astronomy & Astrophysics Astronomy and Astrophysics Review Astrophysical Journal European Physical Journal D. Atomic, Molecular

343

Author's personal copy Journal of Econometrics 147 (2008) 336349  

E-Print Network [OSTI]

Author's personal copy Journal of Econometrics 147 (2008) 336≠349 Contents lists available at ScienceDirect Journal of Econometrics journal homepage: www.elsevier.com/locate/jeconom The structure

LaFrance, Jeffrey T.

2008-01-01T23:59:59.000Z

344

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network [OSTI]

W. Wang (2007). "Storage of hydrogen in single-walled carbongravimetric storage capacity of hydrogen in a diamond-shapedfor energy storage applications such as hydrogen absorption.

Gao, Yan

2011-01-01T23:59:59.000Z

345

aligned single wall: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Page Topic Index 1 Printed Multilayer Superstructures of Aligned Single-Walled Carbon Materials Science Websites Summary: Printed Multilayer Superstructures of Aligned...

346

Imaging cell wall architecture in single Zinnia elegans tracheary elements  

E-Print Network [OSTI]

indicated a loss of lignin and a modest loss of otherTEs accumulate lignin in their secondary walls and undergohemicelluloses, and also lignin, a complex aromatic polymer

Lacayo, Catherine

2012-01-01T23:59:59.000Z

347

Electromagnetic Interference (EMI) Shielding of Single-Walled Carbon  

E-Print Network [OSTI]

Electromagnetic Interference (EMI) Shielding of Single-Walled Carbon Nanotube Epoxy Composites Ning (SWNT)-polymer composites have been fabricated to evaluate the electromagnetic interference (EMI

Gao, Hongjun

348

Fracture of welded aluminum thin-walled structures  

E-Print Network [OSTI]

A comprehensive methodology was developed in the thesis for damage prediction of welded aluminum thin-walled structures, which includes material modeling, calibration, numerical simulation and experimental verification. ...

Zheng, Li, Ph. D. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

349

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network [OSTI]

scale synthesis of carbon nanotubes." Nature, Vol.358, 220-Ropes of Metallic Carbon Nanotubes." Science, Vol.273(5274),of single- wall carbon nanotubes. Process, product, and

Gao, Yan

2011-01-01T23:59:59.000Z

350

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network [OSTI]

Single-walled carbon nanotubes Carbon nanotubes (CNTs) arescale synthesis of carbon nanotubes." Nature, Vol.358, 220-Ropes of Metallic Carbon Nanotubes." Science, Vol.273(5274),

Gao, Yan

2011-01-01T23:59:59.000Z

351

Moisture Management for High R-Value Walls  

SciTech Connect (OSTI)

The following report explains the moisture-related concerns for High R-value wall assemblies and discusses past Building America research work that informs this study. Hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones (2, 3, 4C, 4, 5A, and 7, respectively). The simulations are informed by experience gained from past research in this area and validated by field measurement and forensic experience. The modeling program was developed to assess the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage. The peak annual moisture content of the wood based exterior sheathing was used to comparatively analyze the response to the moisture loads for each of the walls in each given city. Walls which experienced sheathing moisture contents between 20% and 28% were identified as risky, whereas those exceeding 28% were identified as very high risk. All of the wall assemblies perform well under idealized conditions. However, only the walls with exterior insulation, or cavity insulation which provides a hygrothermal function similar to exterior insulation, perform adequately when exposed to moisture loads. Walls with only cavity insulation are particularly susceptible to air leakage condensation. None of the walls performed well when a precipitation based bulk water leak was introduced to the backside of the sheathing, emphasizing the importance of proper flashing details.

Lepage, R.; Schumacher, C.; Lukachko, A.

2013-11-01T23:59:59.000Z

352

Oscillating light wall above a sunspot light bridge  

E-Print Network [OSTI]

With the high tempo-spatial \\emph{Interface Region Imaging Spectrograph} 1330 {\\AA} images, we find that many bright structures are rooted in the light bridge of NOAA 12192, forming a \\emph{light wall}. The light wall is brighter than the surrounding areas, and the wall top is much brighter than the wall body. The New Vacuum Solar Telescope H$\\alpha$ and the \\emph{Solar Dynamics Observatory} 171 {\\AA} and 131 {\\AA} images are also used to study the light wall properties. In 1330 {\\AA}, 171 {\\AA}, and 131 {\\AA}, the top of the wall has a higher emission, while in the H$\\alpha$ line, the wall top emission is very low. The wall body corresponds to bright areas in 1330 {\\AA} and dark areas in the other lines. The top of the light wall moves upward and downward successively, performing oscillations in height. The deprojected mean height, amplitude, oscillation velocity, and the dominant period are determined to be 3.6 Mm, 0.9 Mm, 15.4 km s$^{-1}$, and 3.9 min, respectively. We interpret the oscillations of the lig...

Yang, Shuhong; Jiang, Fayu; Xiang, Yongyuan

2015-01-01T23:59:59.000Z

353

artery wall thickness: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(CCA-IMT) were measured using ultrasonography. Gait 22 LIFE CYCLE ASSESSMENT OF A HEMP CONCRETE WALL: IMPACT OF THICKNESS AND COATING. Physics Websites Summary: to reduce...

354

Moisture Management of High-R Walls (Fact Sheet)  

SciTech Connect (OSTI)

The following report explains the moisture-related concerns for High R-value wall assemblies and discusses past Building America research work that informs this study. Hygrothermal simulations were prepared for several common approaches to High R-value wall construction in six cities (Houston, Atlanta, Seattle, St. Louis, Chicago, and International Falls) representing a range of climate zones (2, 3, 4C, 4, 5A, and 7, respectively). The simulations are informed by experience gained from past research in this area and validated by field measurement and forensic experience. The modeling program was developed to assess the moisture durability of the wall assemblies based on three primary sources of moisture: construction moisture, air leakage condensation, and bulk water leakage. The peak annual moisture content of the wood based exterior sheathing was used to comparatively analyze the response to the moisture loads for each of the walls in each given city. Walls which experienced sheathing moisture contents between 20% and 28% were identified as risky, whereas those exceeding 28% were identified as very high risk. All of the wall assemblies perform well under idealized conditions. However, only the walls with exterior insulation, or cavity insulation which provides a hygrothermal function similar to exterior insulation, perform adequately when exposed to moisture loads. Walls with only cavity insulation are particularly susceptible to air leakage condensation. None of the walls performed well when a precipitation based bulk water leak was introduced to the backside of the sheathing, emphasizing the importance of proper flashing details.

Not Available

2013-12-01T23:59:59.000Z

355

Seismic design, testing and analysis of reinforced concrete wall buildings  

E-Print Network [OSTI]

based on the material testing data of concrete cylinders inDESIGN, TESTING AND ANALYSIS OF REINFORCED CONCRETE WALLDESIGN, TESTING AND ANALYSIS OF REINFORCED CONCRETE WALL

Panagiotou, Marios

2008-01-01T23:59:59.000Z

356

Wall and laser spot motion in cylindrical hohlraums  

SciTech Connect (OSTI)

Wall and laser spot motion measurements in empty, propane-filled and plastic (CH)-lined gold coated cylindrical hohlraums were performed on the Omega laser facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. Wall motion was measured using axial two-dimensional (2D) x-ray imaging and laser spot motion was perpendicularly observed through a thinned wall using streaked hard x-ray imaging. Experimental results and 2D hydrodynamic simulations show that while empty targets exhibit on-axis plasma collision, CH-lined and propane-filled targets inhibit wall expansion, corroborated with perpendicular streaked imaging showing a slower motion of laser spots.

Huser, G.; Courtois, C.; Monteil, M.-C. [CEA, DAM, DIF, F-91297 Arpajon (France)

2009-03-15T23:59:59.000Z

357

Notes 03. Kinematics of motion in cylindrical journal bearings  

E-Print Network [OSTI]

Reynolds equation for cylindrical journal bearings. Kinematics of motion and film thickness. Distinction between fixed and rotating coordinates. The pure squeeze velocity vector. Examples of journal motion....

San Andres, Luis

2009-01-01T23:59:59.000Z

358

E-Print Network 3.0 - aaas science journalism Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

science journalism Search Powered by Explorit Topic List Advanced Search Sample search results for: aaas science journalism Page: << < 1 2 3 4 5 > >> 1 IEEE Journal on Selected...

359

Copyright (c) 2009 Georgetown Journal on Poverty Law & Policy Georgetown Journal on Poverty Law & Policy  

E-Print Network [OSTI]

Page 1 Copyright (c) 2009 Georgetown Journal on Poverty Law & Policy Georgetown Journal on Poverty Law & Policy Spring, 2009 16 Geo. J. Poverty Law & Pol'y 273 SPEECH: The Redefined Hero: Discovering

Zhou, Pei

360

TERMINATION OF THE POROUS WALL CONCEPT To: APEX GROUP  

E-Print Network [OSTI]

TERMINATION OF THE POROUS WALL CONCEPT To: APEX GROUP From: Anter El-Azab (anter@seas.ucla.edu) Re with Lithium will can not work and this concept should be terminated. For the case of vanadium alloy on this concept should be terminated. #12;TERMINATION OF THE POROUS WALL CONCEPT Best Regards, Anter #12;

California at Los Angeles, University of

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Wall Sculpture by Ellsworth Kelly Installed on Dartmouth Campus  

E-Print Network [OSTI]

Wall Sculpture by Ellsworth Kelly Installed on Dartmouth Campus Dartmouth Panels will be dedicated District, a wall sculpture by renowned abstract artist Ellsworth Kelly has been installed on the eastern façade of the Hopkins Center for the Arts, facing the Visual Arts Center. Kelly was in attendance

Shepherd, Simon

362

NON-RECTANGULAR RC WALLS: A REVIEW ON EXPERIMENTAL INVESTIGATIONS  

E-Print Network [OSTI]

section. It was rare that tests were done using load paths that did not follow the principal axes subjected to unidirectional or bidirectional loading along one or both of the principal axes of the wall-sections such as for example L-shaped or U-shaped walls which were tested under quasi-static or dynamic loads. The tests

Thévenaz, Jacques

363

Liquid Lithium Wall Experiments in CDX-U R. Majeski,  

E-Print Network [OSTI]

Liquid Lithium Wall Experiments in CDX-U R. Kaita, a R. Majeski, a S. Luckhardt, b R. Doerner, b M ABSTRACT The concept of a flowing lithium first wall for a fusion reactor may lead to a significant advance is intensely heated and well diagnosed, and an extensive liquid lithium plasma-facing surface will be used

California at Los Angeles, University of

364

Optical absorption intensity of semiconductor single-wall carbon nanotubes  

E-Print Network [OSTI]

Optical absorption intensity of semiconductor single-wall carbon nanotubes Y. Oyama1 , R. Saito1. The optical absorption intensity is inversely proportional to the diameter in the unit of per carbon atom of single-wall carbon nanotubes (SWNT) synthesized by alcohol CCVD (ACCVD) method and HiPco method [1

Maruyama, Shigeo

365

Absorption spectroscopy of individual single-walled carbon nanotubes  

E-Print Network [OSTI]

Absorption spectroscopy of individual single-walled carbon nanotubes Stéphane Berciaud,a Laurent-walled carbon nanotubes (SWNTs) lead to heterogeneous samples containing mixtures of metallic and semiconducting species with a variety of lengths and defects. Optical detection at the single nanotube level should thus

Boyer, Edmond

366

Quantum rotation of hydrogen in single-wall carbon nanotubes  

E-Print Network [OSTI]

Quantum rotation of hydrogen in single-wall carbon nanotubes C.M. Brown a,b , T. Yildirim b , D containing single-wall carbon nanotubes. These materials have attracted considerable interest recently due the ortho¬Īpara conversion of physisorbed hydrogen in a nanotube containing soot loaded with hydrogen. From

Yildirim, Taner

367

Simulations of nanosensors based on single walled carbon nanotubes  

E-Print Network [OSTI]

Simulations of nanosensors based on single walled carbon nanotubes Polina Pine1, Yuval E. Yaish2. The potential of single-walled carbon nanotubes as mass sensors is examined. The change in mass leads to proportional changes in the nanotube vibrational frequencies, which are monitored during atomistic simulations

Adler, Joan

368

Scanning tunneling spectroscopy of suspended single-wall carbon nanotubes  

E-Print Network [OSTI]

Scanning tunneling spectroscopy of suspended single-wall carbon nanotubes B. J. LeRoy,a) S. G-wall carbon nanotubes that are freely suspended over a trench. The nanotubes were grown by chemical vapor on the freestanding portions of the nanotubes. Spatially resolved spectroscopy on the suspended portion of both

Dekker, Cees

369

Characterization of single wall carbon nanotubes by nonane preadsorption  

E-Print Network [OSTI]

energy for nitrogen adsorbed in nanotubes at zero coverage within the range of 12­18 kJ/mol. This bindingCharacterization of single wall carbon nanotubes by nonane preadsorption Oleg Byl a , Jie Liu b The preferential blocking of the interior adsorption sites of single walled carbon nanotubes (SWNTs) by n

Liu, Jie

370

Electrical Transport in Single-Wall Carbon Nanotubes  

E-Print Network [OSTI]

. (a) Schematic view a nanotube field-effect transistor (b) The Dirac energy dispersion coneElectrical Transport in Single-Wall Carbon Nanotubes Michael J. Biercuk1,3 , Shahal Ilani2 metal and semiconducting single-wall carbon nanotubes. The fundamental scattering mechanisms governing

McEuen, Paul L.

371

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes  

E-Print Network [OSTI]

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes P. M. Rafailov, M and studied the Raman response of electro- chemically doped single-walled carbon nanotubes (SWNT) using different salt solutions. The fre- quency shift of the radial breathing mode (RBM) and the high-energy mode

Nabben, Reinhard

372

ORIGINAL PAPER Hydrothermal process synthesized electrocatalytic multi-walled  

E-Print Network [OSTI]

ORIGINAL PAPER Hydrothermal process synthesized electrocatalytic multi-walled carbon nanotubes as MWCNTs-Au, have been successfully prepared by a facile hydrothermal pro- cess of gold(III) chloride (Au. Keywords Hydrothermal √Ā Composites √Ā Au microparticles √Ā Multi-walled carbon nanotubes √Ā Ethanol oxidation

Guo, John Zhanhu

373

Optical microcavity with semiconducting single-wall carbon nanotubes  

E-Print Network [OSTI]

Optical microcavity with semiconducting single- wall carbon nanotubes Etienne Gaufrès,1 Nicolas-Perot microcavities based on semiconducting single-wall carbon nanotubes with a quality factor of 160. We properties References and links 1. P. Avouris, M. Freitag and V. Perebeinos, "Carbon nanotube photonics

Paris-Sud XI, Université de

374

Laser-produced plasma-wall interaction O. RENNER,1  

E-Print Network [OSTI]

Laser-produced plasma-wall interaction O. RENNER,1 R. LISKA,2 AND F.B. ROSMEJ3,4 1 Institute, France (RECEIVED 30 August 2009; ACCEPTED 21 September 2009) Abstract Jets of laser­generated plasma surfaces (walls). The pilot experiments carried out on the iodine laser system (5­200 J, 0.44 mm, 0

Liska, Richard

375

Electron-wall interaction in Hall thrustersa... Y. Raitsesb  

E-Print Network [OSTI]

Electron-wall interaction in Hall thrustersa... Y. Raitsesb and D. Staack Princeton Plasma Physics; accepted 22 February 2005; published online 2 May 2005 Electron-wall interaction effects in Hall thrusters this threshold, the electron energy gain is constant in the acceleration region and therefore, secondary electron

376

Methods for degrading or converting plant cell wall polysaccharides  

DOE Patents [OSTI]

The present invention relates to methods for converting plant cell wall polysaccharides into one or more products, comprising: treating the plant cell wall polysaccharides with an effective amount of a spent whole fermentation broth of a recombinant microorganism, wherein the recombinant microorganism expresses one or more heterologous genes encoding enzymes which degrade or convert the plant cell wall polysaccharides into the one or more products. The present invention also relates to methods for producing an organic substance, comprising: (a) saccharifying plant cell wall polysaccharides with an effective amount of a spent whole fermentation broth of a recombinant microorganism, wherein the recombinant microorganism expresses one or more heterologous genes encoding enzymes which degrade or convert the plant cell wall polysaccharides into saccharified material; (b) fermenting the saccharified material of step (a) with one or more fermenting microoganisms; and (c) recovering the organic substance from the fermentation.

Berka, Randy (Davis, CA); Cherry, Joel (Davis, CA)

2008-08-19T23:59:59.000Z

377

Theoretical comparison between field emission from single-wall and multi-wall carbon nanotubes A. Mayer,1,  

E-Print Network [OSTI]

Theoretical comparison between field emission from single-wall and multi-wall carbon nanotubes A s : 73.63.Fg, 79.70. q, 85.35.Kt, 03.65.Nk I. INTRODUCTION Carbon nanotubes show interesting field-emission of field emission from carbon nanotubes,13­16 we now consider the depen- dence of the emission from single

Mayer, Alexandre

378

Domain wall QCD with physical quark masses  

E-Print Network [OSTI]

We present results for several light hadronic quantities ($f_\\pi$, $f_K$, $B_K$, $m_{ud}$, $m_s$, $t_0^{1/2}$, $w_0$) obtained from simulations of 2+1 flavor domain wall lattice QCD with large physical volumes and nearly-physical pion masses at two lattice spacings. We perform a short, O(3)%, extrapolation in pion mass to the physical values by combining our new data in a simultaneous chiral/continuum `global fit' with a number of other ensembles with heavier pion masses. We use the physical values of $m_\\pi$, $m_K$ and $m_\\Omega$ to determine the two quark masses and the scale - all other quantities are outputs from our simulations. We obtain results with sub-percent statistical errors and negligible chiral and finite-volume systematics for these light hadronic quantities, including: $f_\\pi$ = 130.2(9) MeV; $f_K$ = 155.5(8) MeV; the average up/down quark mass and strange quark mass in the $\\overline {\\rm MS}$ scheme at 3 GeV, 2.997(49) and 81.64(1.17) MeV respectively; and the neutral kaon mixing parameter, $B_K$, in the RGI scheme, 0.750(15) and the $\\overline{\\rm MS}$ scheme at 3 GeV, 0.530(11).

RBC; UKQCD collaborations; :; T. Blum; P. A. Boyle; N. H. Christ; J. Frison; N. Garron; R. J. Hudspith; T. Izubuchi; T. Janowski; C. Jung; A. Juettner; C. Kelly; R. D. Kenway; C. Lehner; M. Marinkovic; R. D. Mawhinney; G. McGlynn; D. J. Murphy; S. Ohta; A. Portelli; C. T. Sachrajda; A. Soni

2014-11-25T23:59:59.000Z

379

Pneumatic wall-locking geophone system  

DOE Patents [OSTI]

A seismic signal receiving system is provided for use in boreholes to receive seismic waves in carrying out geophysical investigations. The system includes three pairs of opposed plates, each of the pairs of plates including oppositely facing outer surfaces for engagement with opposite sides of a borehole. A seismic receiver is mounted on the inner surface of each of the plates for receiving seismic signals. A double-acting, fluid-operated actuator selectively causes relative movement of the plates of the pairs of plates away from each other to provide expansion thereof so as to enable the plates to engage the walls of a borehole and selectively causes relative movement of the plates of the pairs of plates toward each other to provide retraction thereof so as to enable the system to be removed from a borehole. The pairs of plates each comprise a relatively long plate and a relatively short plate. An expandable linkage interconnects the long plates at the distal ends thereof. The plates are mechanically biassed into the retracted state so that the plates return to this state in the event of a system failure.

Kuhlman, Harland L. (Minneapolis, MN); Cumerlato, Calvin L. (Minneapolis, MN); Tweeton, Daryl R. (Apple Valley, MN)

1991-01-01T23:59:59.000Z

380

Double wall vacuum tubing and method of manufacture  

DOE Patents [OSTI]

An evacuated double wall tubing is shown together with a method for the manufacture of such tubing which includes providing a first pipe of predetermined larger diameter and a second pipe having an O.D. substantially smaller than the I.D. of the first pipe. An evacuation opening is then in the first pipe. The second pipe is inserted inside the first pipe with an annular space therebetween. The pipes are welded together at one end. A stretching tool is secured to the other end of the second pipe after welding. The second pipe is then prestressed mechanically with the stretching tool an amount sufficient to prevent substantial buckling of the second pipe under normal operating conditions of the double wall pipe. The other ends of the first pipe and the prestressed second pipe are welded together, preferably by explosion welding, without the introduction of mechanical spacers between the pipes. The annulus between the pipes is evacuated through the evacuation opening, and the evacuation opening is finally sealed. The first pipe is preferably of steel and the second pipe is preferably of titanium. The pipes may be of a size and wall thickness sufficient for the double wall pipe to be structurally load bearing or may be of a size and wall thickness insufficient for the double wall pipe to be structurally load bearing, and the double wall pipe positioned with a sliding fit inside a third pipe of a load-bearing size.

Stahl, Charles R. (Scotia, NY); Gibson, Michael A. (Houston, TX); Knudsen, Christian W. (Houston, TX)

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Conductance-Controlled Point Functionalization of Single-Walled Carbon Nanotubes  

E-Print Network [OSTI]

of Single-Walled Carbon Nanotubes Brett R. Goldsmith, 1 Johnof Single-Walled Carbon Nanotubes Brett R. Goldsmith et al.single-walled carbon nanotubes (SWNTs) to fabricate single-

Collins, Philip G

2007-01-01T23:59:59.000Z

382

A High Resolution Ultrawideband Wall Penetrating Erman Engin, Berkehan iftiolu, Meri zcan and brahim Tekin  

E-Print Network [OSTI]

for underground mine detection [1], [2], through the wall imaging [3], cancerous tissue detection applications [4 respiratory activity of a human behind a 23 cm thick brick wall. Keywords: UWB Radar, Wall penetrating Radar

Yanikoglu, Berrin

383

ICRF Specific Plasma Wall Interactions in JET with the ITER-Like Wall  

SciTech Connect (OSTI)

A variety of plasma wall interactions (PWIs) during operation of the so-called A2 ICRF antennas is observed in JET with the ITER-like wall. Amongst effects of the PWIs, the W content increase is the most significant, especially at low plasma densities. No increase of W source from the main divertor and entrance of the outer divertor during ICRF compared to NBI phases was found by means of spectroscopic and WI (400.9 nm) imaging diagnostics. In contrary, the W flux there is higher during NBI. Charge exchange neutrals of hydrogen isotopes could be excluded as considerable contributors to the W source. The high W content in ICRF heated limiter discharges suggests the possibility of other W sources than the divertor alone. Dependencies of PWIs to individual ICRF antennas during q95-scans, and intensification of those for the 90 phasing, indicate a link between the PWIs and the antenna near-fields. The PWIs include heat loads and Be sputtering pattern on antenna limiters. Indications of some PWIs at the outer divertor entrance are observed which do not result in higher W flux compared to the NBI phases, but are characterized by small antenna-specific (up to 25% with respect to ohmic phases) bipolar variations of WI emission. The first TOPICA calculations show a particularity of the A2 antennas compared to the ITER antenna, due to the presence of long antenna limiters in the RF image current loop and thus high near-fields across the most part of the JET outer wall.

Bobkov, V. [Max-Planck-Institut fur Plasmaphysik, EURATOM Association, Garching, Germany] [Max-Planck-Institut fur Plasmaphysik, EURATOM Association, Garching, Germany; Arnoux, G. [EURATOM, Culham Sci Ctr, Abingdon, Oxon England] [EURATOM, Culham Sci Ctr, Abingdon, Oxon England; Brezinsek, S. [Forschungszentrum Julich, Julich, Germany] [Forschungszentrum Julich, Julich, Germany; Coenen, J. W. [Institute of Energy and Climate Research, Germany] [Institute of Energy and Climate Research, Germany; Colas, L. [French Atomic Energy Commission (CEA)] [French Atomic Energy Commission (CEA); Clever, M. [Institute of Energy and Climate Research, Germany] [Institute of Energy and Climate Research, Germany; Czarnecka, A. [Association EURATOM-IPPLM, Warsaw, Poland] [Association EURATOM-IPPLM, Warsaw, Poland; Braun, F. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Dux, R. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Huber, Alexander [EURATOM / FZ-Juelich, Germany] [EURATOM / FZ-Juelich, Germany; Jacquet, P. [EURATOM / UKAEA, Abingdon, UK] [EURATOM / UKAEA, Abingdon, UK; Klepper, C Christopher [ORNL] [ORNL; Lerche, E. [ERM-KMS, Association EURATOM-Belgian State, Brussels, Belgium] [ERM-KMS, Association EURATOM-Belgian State, Brussels, Belgium; Maggi, C. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Marcotte, F. [CEA IRFM, St. Paul-lez-Durance, France] [CEA IRFM, St. Paul-lez-Durance, France; Maslov, M. [Association EURATOM-CCFE, Abingdon, UK] [Association EURATOM-CCFE, Abingdon, UK; Matthews, G. [Association EURATOM-CCFE, Abingdon, UK] [Association EURATOM-CCFE, Abingdon, UK; Mayoral, M.-L. [EURATOM / UKAEA, UK] [EURATOM / UKAEA, UK; McCormick, K. D. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Meigs, A. G. [EURATOM / UKAEA, UK] [EURATOM / UKAEA, UK; Milanesio, D. [Politecnico di Torino] [Politecnico di Torino; Monakhov, I. [EURATOM / UKAEA, Abingdon, UK] [EURATOM / UKAEA, Abingdon, UK; Neu, Rudolf [EURATOM / IPP Garching, Germany] [EURATOM / IPP Garching, Germany; Noterdaeme, J.-M. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Putterich, Th. [Max-Planck-Institut fur Plasma Physik, Garching, Germany] [Max-Planck-Institut fur Plasma Physik, Garching, Germany; Rimini, F. [Association EURATOM-CCFE, Abingdon, UK] [Association EURATOM-CCFE, Abingdon, UK; Rooj, G. Van [Institute for Plasma Physics Rijnhuizen, Nieuwegein, Netherlands] [Institute for Plasma Physics Rijnhuizen, Nieuwegein, Netherlands; Sergienko, G. [Institute of Energy and Climate Research, Germany] [Institute of Energy and Climate Research, Germany; Van Eester, D. [ERM-KMS, Association EURATOM-Belgian State, Brussels, Belgium] [ERM-KMS, Association EURATOM-Belgian State, Brussels, Belgium

2013-01-01T23:59:59.000Z

384

Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure  

DOE Patents [OSTI]

Methods for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physisorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics.

Sachtler, Wolfgang M. H. (Evanston, IL); Huang, Yin-Yan (Evanston, IL)

1998-01-01T23:59:59.000Z

385

Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure  

DOE Patents [OSTI]

Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

Sachtler, W.M.H.; Huang, Y.Y.

1998-07-28T23:59:59.000Z

386

SUBCRITICAL BUBBLES NEAR THE PHASE SPACE DOMAIN WALL  

E-Print Network [OSTI]

We study the subcritical bubble formation near the phase space domain wall. We take into account that the phase of the scalar field can vary using complex U(1) symmetric field and a phenomenological potential with cubic term responsible to symmetry breaking. We show that the presence of the domain wall induces subcritical bubbles so that their formation rate near the wall is considerably larger than far of it. The allowed deviations of the phases of new bubbles are so large that they prevent the system from induced nucleation.

J. Sirkka; I. Vilja

1995-03-31T23:59:59.000Z

387

An International Journal of MINERALOGY, CRYSTALLOGRAPHY, GEOCHEMISTRY,  

E-Print Network [OSTI]

, developed from the weathering of alumosilicate-rich parent rocks. These residual deposits are mainly formedAn International Journal of MINERALOGY, CRYSTALLOGRAPHY, GEOCHEMISTRY, ORE DEPOSITS, PETROLOGY

Boni, Maria

388

begell house, inc. Journal Production  

E-Print Network [OSTI]

;Special Topics & Reviews in Porous Media -- An International Journal, 3 (3): 209­213 (2012) USING. The calculated effective permeabilities of three building materials, including limestone, concrete, and brick. For example, critical voltage of concrete at limited cur- rents is used to evaluate the concrete permeability

Hu, Qinhong "Max"

389

Journal of Animal Ecology 2002  

E-Print Network [OSTI]

Journal of Animal Ecology 2002 71, 23¬≠31 ¬© 2002 British Ecological Society Blackwell Science Ltd TONI LAAKSONEN, ERKKI KORPIM√?KI and HARRI HAKKARAINEN Section of Ecology, Department of Biology of Animal Ecology (2002) 71, 23¬≠31 Introduction An understanding of age-dependent reproductive out- put

Laaksonen, Toni

390

ASTRONOMICAL JOURNAL, 122 : 15381544, September  

E-Print Network [OSTI]

ASTRONOMICAL JOURNAL, 122 : 1538√?1544, September ( American Astronomical Society. All reserved element abundances central the planetary nebula K648 from analysis Hubble Space Telescope Faint Object Spectrograph spectra (1200√?3300 Carbon found be A# ). approximately times overabundant with respect solar

Bianchi, Luciana

391

antibody-functionalized single-walled carbon: Topics by E-print...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

thermal Kono, Junichiro 2 Single-Walled Carbon Nanotubes for Nanoelectronics Materials Science Websites Summary: CHAPTER 6 Single-Walled Carbon Nanotubes for...

392

aligned multi-walled carbon: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 Structural annealing of carbon coated aligned multi-walled carbon nanotube sheets Materials Science Websites Summary: Structural annealing of carbon coated aligned multi-walled...

393

aligned double-walled carbon: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Reinhard 2 Atomistic Simulations of Double-Walled Carbon Nanotubes (DWCNTs) as Materials Science Websites Summary: Atomistic Simulations of Double-Walled Carbon Nanotubes...

394

E-Print Network 3.0 - anterior vaginal wall Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

vaginal wall Search Powered by Explorit Topic List Advanced Search Sample search results for: anterior vaginal wall Page: << < 1 2 3 4 5 > >> 1 Anterior repair using Bologna...

395

The Innocent Habiyaremye Fellowship Information Networking Institute --Carnegie Mellon | 4616 Henry Street Pittsburgh, PA 15213 | Phone: 412.268.7195 | www.ini.cmu.edu  

E-Print Network [OSTI]

Henry Street · Pittsburgh, PA 15213 | Phone: 412.268.7195 | www.ini.cmu.edu Information Networking Institute (INI) who embodies a sense of community spirit in his or her everyday actions, while also meeting of an INI alumnus and a native of Rwanda who inspired others through his kindness and volunteer activities

McGaughey, Alan

396

Duke University/Health System Disability Management System, 402 Oregon Street, Box 90142, Telephone: (919) 668-6213 Fax: (919) 668-3977 TTY (919) 668-1329  

E-Print Network [OSTI]

Duke University/Health System Disability Management System, 402 Oregon Street, Box 90142, Telephone,000 ­ Send Accommodation Fund application to the Disability Management System at (919) 668-6213 or leigh be obtained through the Disability Management System, or downloaded from the Disability Management System

Oren, Ram

397

Office of the Mayor 2180 Milvia Street, Berkeley, CA 94704 Tel: (510) 981-7100 TDD: (510) 981-6903 Fax: (510) 981-7199  

E-Print Network [OSTI]

." said Gary Gerber, President of Sun Light & Power, a solar installation company in BerkeleyOffice of the Mayor 2180 Milvia Street, Berkeley, CA 94704 Tel: (510) 981-7100 TDD: (510) 981, Berkeley) 510-642-1640 FOR IMMEDIA RELEASETE October 23, 2007 Berkeley Breakthrough on Financing Solar

Kammen, Daniel M.

398

WICHITA STATE UNIVERSITY RESEARCH AND TECHNOLOGY TRANSFER 1845 Fairmount Street Wichita, Kansas 67260-0007 tele: (316) 978-3285 fax: (316) 978-3750  

E-Print Network [OSTI]

WICHITA STATE UNIVERSITY RESEARCH AND TECHNOLOGY TRANSFER 1845 Fairmount Street Wichita, Kansas for each of its virtual development tools. www.vimo-tech.com ### CONTACT: Becky Hundley Technology Transfer for the commercialization of Olivares' technology is one that John Tomblin, vice president of research and technology

399

Michigan State University Community Music School 841-B Timberlane Street East Lansing, MI 48823 Phone: 517-355-7661 Web: cms.msu.edu  

E-Print Network [OSTI]

Michigan State University Community Music School 841-B Timberlane Street ∑ East Lansing, MI 48823 Explore Michigan's past through tour of music, exhibits May 1 Contact: Amanda Darche, MSU Community Music School (517) 355-7661, ext. 16, adarche@msu.edu EAST LANSING, Mich. ≠Michigan's past is the inspiration

Liu, Taosheng

400

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF EQUIPMENT  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF EQUIPMENT 1. STANDARD TERMS & CONDITIONS RELATING TO THE PURCHASE and having its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the

Schnaufer, Achim

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF IT EQUIPMENT  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF IT EQUIPMENT 1. STANDARD TERMS AND CONDITIONS RELATING TO THE PURCHASE and having its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the

Schnaufer, Achim

402

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF GOODS  

E-Print Network [OSTI]

Procurement Office, The University of Edinburgh, Charles Stewart House, 9-16 Chambers Street, Edinburgh, EH1 1HT PURCHASE OF GOODS 1. STANDARD TERMS AND CONDITIONS RELATING TO THE PURCHASE OF GOODS its principal administrative offices at Old College, South Bridge, Edinburgh, EH8 9YL (the "University

Schnaufer, Achim

403

Maine Department of Environmental Protection Washington State Department of Ecology California Environmental Protection Agency State House Station 17 Hazardous Waste & Toxics Reduction 1001 I Street  

E-Print Network [OSTI]

Maine Department of Environmental Protection Washington State Department of Ecology California Environmental Protection Agency State House Station 17 Hazardous Waste & Toxics Reduction 1001 I Street Augusta, said Ted Sturdevant, Director of the Washington State Department of Ecology. We need a federal law

404

The Prairie Naturalist 42(3/4):130137; 2010 Present address: Iowa DNR Mississippi Monitoring Station, 206 Rose Street, Bellevue, Iowa 52031  

E-Print Network [OSTI]

of white bass population dynamics and their role in fish communities that is necessary for successful Station, 206 Rose Street, Bellevue, Iowa 52031 Population and Diet Assessment of White Bass in Lake Sharpe 57007 (AEA, TWS, MRW, DWW) ABSTRACT White bass (Morone chrysops) have been introduced into all 4 South

405

International Center 3201 South State Street, MTCC -Room 203 (312)-567-3680 icenter@iit.edu www.ic.iit.edu Illinois Institute of Technology  

E-Print Network [OSTI]

@iit.edu ­ www.ic.iit.edu Illinois Institute of Technology International Center 3201 S. State Street MTCC, Room Institute of Technology (IIT) in order to facilitate my transfer. Signature: _Date:_ SECTION B: THIS SECTION notified us of his/her intent to transfer to Illinois Institute of Technology. Please complete

Heller, Barbara

406

Office of the City Manager 2180 Milvia Street, Berkeley, CA 94704 Tel: (510) 981-7000 TDD: (510) 981-6903 Fax: (510) 981-7099  

E-Print Network [OSTI]

of the grants is to develop a program that would enable the City to assist private property owners to finance is expected to be available on a pilot basis this year. Until the program is available, persons interestedOffice of the City Manager 2180 Milvia Street, Berkeley, CA 94704 Tel: (510) 981-7000 TDD: (510

Kammen, Daniel M.

407

Domain wall induced magnetoresistance in a superconductor/ferromagnet nanowire  

E-Print Network [OSTI]

In a nanowire consisting of a ferromagnet/insulator/superconductor multilayer structure, the superconductivity is shown to depend strongly on the configuration of the magnetic domain walls in the neighboring ferromagnetic ...

Miao, G. X.

408

Characterization of double walled carbon nanotubes-polyvinylidene fluoride nanocomposites  

E-Print Network [OSTI]

One of the main objectives of this thesis is to disperse double-walled carbon nanotubes (DWNT) in a polyvinylidene fluoride (PVDF) matrix, and to characterize the resulting composite using electrical, thermal, and mechanical characterization...

Almasri, Atheer Mohammad

2007-04-25T23:59:59.000Z

409

Experimental Investigation of Natural Convection in Trombe Wall Systems  

E-Print Network [OSTI]

In this paper, experiments with a passive solar building with Trombe wall in the north cold climate are carried out and discussed, and the natural convection heat transfer process has been investigated. The relativity of the factors affecting indoor...

Chen, B.; Zhao, J.; Chen, C.; Zhuang, Z.

2006-01-01T23:59:59.000Z

410

Near wall cooling for a highly tapered turbine blade  

SciTech Connect (OSTI)

A turbine blade having a pressure sidewall and a suction sidewall connected at chordally spaced leading and trailing edges to define a cooling cavity. Pressure and suction side inner walls extend radially within the cooling cavity and define pressure and suction side near wall chambers. A plurality of mid-chord channels extend radially from a radially intermediate location on the blade to a tip passage at the blade tip for connecting the pressure side and suction side near wall chambers in fluid communication with the tip passage. In addition, radially extending leading edge and trailing edge flow channels are located adjacent to the leading and trailing edges, respectively, and cooling fluid flows in a triple-pass serpentine path as it flows through the leading edge flow channel, the near wall chambers and the trailing edge flow channel.

Liang, George (Palm City, FL)

2011-03-08T23:59:59.000Z

411

Superconductivity in Bundles of Double-Wall Carbon Nanotubes  

E-Print Network [OSTI]

We present electrical and thermal specific heat measurements that show superconductivity in double-wall carbon nanotube (DWCNT) bundles. Clear evidence, comprising a resistance drop as a function of temperature, magnetoresistance ...

Shi, Wu

412

Interactions between Liquid-Wall Vapor and Edge Plasmas  

SciTech Connect (OSTI)

The use of liquid walls for fusion reactors could help solve problems associated with material erosion from high plasma heat-loads and neutronic activation of structures. A key issue analyzed here is the influx of impurity ions to the core plasma from the vapor of liquid side-walls. Numerical 2D transport simulations are performed for a slab geometry which approximates the edge region of a reactor-size tokamak. Both lithium vapor (from Li or SnLi walls) and fluorine vapor (from Flibe walls) are considered for hydrogen edge-plasmas in the high- and low-recycling regimes. It is found that the minimum influx is from lithium with a low-recycling hydrogen plasma, and the maximum influx occurs for fluorine with a high-recycling hydrogen plasma.

Rognlien, T D; Rensink, M E

2000-05-25T23:59:59.000Z

413

Turbulent drag reduction by constant near-wall forcing  

E-Print Network [OSTI]

Injection of high molecular weight polymer solutions or gas in the near-wall region of a liquid boundary layer can result in turbulent drag reduction of more than†...

JIN XU, SUCHUAN DONG, MARTIN R. MAXEY and GEORGE E. KARNIADAKIS

2007-06-07T23:59:59.000Z

414

Dynamic analysis of concrete coupled wall structures : a parametric study  

E-Print Network [OSTI]

Concrete coupled wall structure is a system that can efficiently dissipate energy under the effect of lateral loads. It has been widely used in medium height buildings for several decades. While researchers have conducted ...

Huang, Elaine Annabelle, 1981-

2005-01-01T23:59:59.000Z

415

angle influences wall: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 41 HYGROTHERMAL BEHAVIOUR OF A HEMP CONCRETE WALL: INFLUENCE OF SORPTION MODELLING Computer Technologies and Information...

416

assessing tube wall: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

tube drawing is a metal Paris-Sud XI, Universit de 35 LIFE CYCLE ASSESSMENT OF A HEMP CONCRETE WALL: IMPACT OF THICKNESS AND COATING. Physics Websites Summary: to reduce...

417

airway wall thickness: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 21 LIFE CYCLE ASSESSMENT OF A HEMP CONCRETE WALL: IMPACT OF THICKNESS AND COATING. Physics Websites Summary: to reduce...

418

Determining heat fluxes from temperature measurements made in massive walls  

SciTech Connect (OSTI)

A technique is described for determining heat fluxes at the surfaces of masonry walls or floors using temperature data measured at two points within the wall, usually near the surfaces. The process consists of solving the heat diffusion equation in one dimension using finite difference techniques given two measured temperatures as input. The method is fast and accurate and also allows for an in-situ measurement of wall thermal diffusivity if a third temperature is measured. The method is documented in sufficient detail so that it can be readily used by the reader. Examples are given for heat flow through walls. Annual results for two cases are presented. The method has also been used to determine heat flow into floors.

Balcomb, J.D.; Hedstrom, J.C.

1980-01-01T23:59:59.000Z

419

FREE CONVECTIVE LAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL  

E-Print Network [OSTI]

NM 87545, pp. 201-222. J.D. Balcomb, J.C. Hedstrom, R.D.wall have been measured by Balcomb, et al [2J. The problem

Akbari, H.

2011-01-01T23:59:59.000Z

420

Field measurement of lateral earth pressures on retaining walls  

E-Print Network [OSTI]

FIELD MEASUREMENT OF LATERAL EARTH PRESSURES ON RETAINING WALLS A Thesis by Michael Riggins Submitted to the Graduate College of Texas ARM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1974... Major Subject: Civil Engineering FIELD MEASUREMENT OF LATERAL EARTH PRESSURES ON RETAINING WALLS A Thesis by Michael Riggins Approved as to style and content by: Cha rman of Committee Memb r Head of Departm t P Etc Member August 1974 ABSTRACT...

Riggins, Michael

1974-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Field measurements of earth pressure on a cantilever retaining wall  

E-Print Network [OSTI]

FIELD MEASUREMENTS OF EARTH PRESSURE ON A CANTILEVER RETAINING WALL A Thesis by LARRY WAYNE SCHULZE Submitted to the Graduate College Texas A&M University in Partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1980 Major Subject: Civil Engineering FIELD MEASUREMENTS OF EARTH PRESSURES ON A CANTILEVER RETAINING WALL A Thesis by LARRY WAYNE SCHULZE Approved as to style and content by: Harry M. Coyle ? C airman of Committee Wayne . Dunlap - Member...

Schulze, Larry Wayne

1980-01-01T23:59:59.000Z

422

Potential digestibilities and digestion kinetics of forage cell wall components  

E-Print Network [OSTI]

LITERATURE REVIEW. EXPERIMENTAL PROCEDURES. Chemical Analysis Colorimetric Determinations Statistical Evaluation. 10 13 15 IV RESULTS AND DISCUSSION 16 V Characteristics of Forage Kinetics of Cell Wall Digestion SUMMARY AND CONCLUSIONS... and both of these variables appear to be the result of several dynamic processes. The amount of structural carbohydrates, the main constituents of the fibrous cell wall, ruminants can digest appears to be limited by the potential digestibility...

Tauskey, William Henry

1973-01-01T23:59:59.000Z

423

LiveWall Operational Evaluation: Seattle Law Enforcement Pilot  

SciTech Connect (OSTI)

The LiveWall concept envisioned as an outgrowth of the Precision Information Environment (PIE) project allows communications between separate groups using interactive video, audio, and a shared desktop environment; this allows everyone to participate and collaborate in real time, regardless of location. The LiveWall concept provides a virtual window to other locations, where all parties can interact and collaboratively work with each other. This functionality is intended to improve multi-site coordination amongst emergency operations centers (EOC), field operations sites and across organizations and jurisdictions to accommodate communications during routine and emergency events. For the initial LiveWall operational evaluation PNNL partnered with the Seattle Police Department (SPD). This partnership allowed for the creation of an excellent LiveWall test bed specific to law enforcement. This partnership made it possible to test the LiveWall concept with scenarios involving the many facets of the law enforcement work done by SPD. PNNL and SPD agreed that integrating the systems into operations for a real event would be the best test of the technology and give SPD staff greater visibility into the functionality and benefits offered by the LiveWall concept.

Barr, Jonathan L.; Burtner, Edwin R.; Stein, Steven L.

2013-10-01T23:59:59.000Z

424

ELM-Induced Plasma Wall Interactions in DIII-D  

SciTech Connect (OSTI)

Intense transient fluxes of particles and heat to the main chamber components induced by edge localized modes (ELMs) are of serious concern for ITER. In DIII-D, plasma interaction with the outboard chamber wall is studied using Langmuir probes and optical diagnostics including a fast framing camera. Camera data shows that ELMs feature helical filamentary structures localized at the low field side of the plasma and aligned with the local magnetic field. During the nonlinear phase of an ELM, multiple filaments are ejected from the plasma edge and propagate towards the outboard wall with velocities of 0.5-0.7 km/s. When reaching the wall, filaments result in 'hot spots'--regions of local intense plasma-material interaction (PMI) where the peak incident particle and heat fluxes are up to 2 orders of magnitude higher than those between ELMs. This interaction pattern has a complicated geometry and is neither toroidally nor poloidally symmetric. In low density/collisionality H-mode discharges, PMI at the outboard wall is almost entirely due to ELMs. In high density/collisionality discharges, contributions of ELMs and inter-ELM periods to PMI at the wall are comparable. A Midplane Material Evaluation Station (MiMES) has been recently installed in order to conduct in situ measurements of erosion/redeposition at the outboard chamber wall, including those caused by ELMs.

Rudakov, D L; Boedo, J A; Yu, J H; Brooks, N H; Fenstermacher, M E; Groth, M; Hollmann, E M; Lasnier, C J; McLean, A G; Moyer, R A; Stangeby, P C; Tynan, G R; Wampler, W R; Watkins, J G; West, W P; Wong, C C; Zeng, L; Bastasz, R J; Buchenauer, D; Whaley, J

2008-05-14T23:59:59.000Z

425

Static load test of Arquin-designed CMU wall.  

SciTech Connect (OSTI)

The Arquin Corporation has developed a new method of constructing CMU (concrete masonry unit) walls. This new method uses polymer spacers connected to steel wires that serve as reinforcing as well as means of accurately placing the spacers so that the concrete block can be dry stacked. The hollows of the concrete block used in constructing the wall are then filled with grout. As part of a New Mexico Small Business Assistance Program (NMSBAP), Sandia National Laboratories conducted a series of tests that statically loaded wall segments to compare the Arquin method to a more traditional method of constructing CMU walls. A total of 12 tests were conducted, three with the Arquin method using a W5 reinforcing wire, three with the traditional method of construction using a number 3 rebar as reinforcing, three with the Arquin method using a W2 reinforcing wire, and three with the traditional construction method but without rebar. The results of the tests showed that the walls constructed with the Arquin method and with a W5 reinforcing wire withstood more load than any of the other three types of walls that were tested.

Jensen, Richard Pearson; Cherry, Jeffery L.

2008-12-01T23:59:59.000Z

426

Wall recession rates in cavity-growth modeling  

SciTech Connect (OSTI)

The predictions of resource utilization obtained from cavity-growth models depend on the methods used to represent the recession rates of the walls of the cavity. Under many circumstances the cavity is largely filled with a bed char rubble. Examination of the mechanisms for recession at walls adjacent to these char beds indicates that the recession rates are controlled by convective heat transfer from the bed to the walls coupled with the thermomechanical breakdown of the walls. A recession-rate representation has been developed, based on this concept, for use in cavity-growth simulation programs. This representation characterizes wall breakdown by either a failure temperature or by a thickness of char layer at failure, and determines rates from a model of heat transfer under these conditions. It gives recession rates that are functions of gas temperature and mass flow rate in the cavity, and depend on effective particle size in the char bed. Wall recession rates calculated for WIDCO, Hoe Creek, and Hanna coals are in the range of 0.1 to 0.8 m/day at a 1300 K cavity temperature, and are consistent with the general rates observed for field tests. 27 references, 10 figures, 1 table.

Grens, E.A. II; Thorsness, C.B.

1984-08-01T23:59:59.000Z

427

A Taylor & Francis Journal: International Journal of Remote Sensings-E... http://www.tandf.co.uk/journals/boards/tres-edbrd.asp 1 of 1 1/24/2005 5:21 AM  

E-Print Network [OSTI]

A Taylor & Francis Journal: International Journal of Remote Sensings- E... http Listing Journals by Subject New Journals Advertising Copyright Transfer FAQs Customer Services Email Preview LibSite Books eBooks Editor-in-Chief: A. P. Cracknell - International Journal of Remote Sensing

Singh, Ramesh P.

428

Publications List Publications in Scientific Journals  

E-Print Network [OSTI]

, 180-190. Feng, L., Newman, A., Farmer, g., Psimoulis, P., Stiros, S. (2010). ¬ęStrong rupture). ¬ęPotential of GPS to measure frequencies of oscillation of engineering structures¬Ľ, Journal of Sound¬Ľ, The Annual of British School of Athens 100. Publications in other journals Psimoulis, P., Nickitopoulou, A

Giger, Christine

429

Journal of Fluid Mechanics Hesitant Nature  

E-Print Network [OSTI]

Journal of Fluid Mechanics Focus luids on F Hesitant Nature E. VILLERMAUX Aix-Marseille Universit0022112009991303 1 #12;Journal of Fluid Mechanics Focus luids on F 1 mm Figure 1. The `gobbling' phenomenon). J. Fluid Mech. (2009), vol. 636, pp. 1­4. c Cambridge University Press 2009 doi:10.1017/S

430

Hindawi Publishing Corporation Journal of Nanotechnology  

E-Print Network [OSTI]

Hindawi Publishing Corporation Journal of Nanotechnology Volume 2010, Article ID 801789, 42 pages a general interest in both fundamental and practical nanotechnology. Over the past 20 years, research's -orbital axis vector (POAV) #12;2 Journal of Nanotechnology (0,0) (1,0) (2,0) (3,0) (4,0) (5,0) (1,1) (2

Wang, Yan Alexander

431

Improved Confinement in JET High {beta} Plasmas with an ITER-Like Wall  

E-Print Network [OSTI]

The replacement of the JET carbon wall (C-wall) by a Be/W ITER-like wall (ILW) has affected the plasma energy confinement. To investigate this, experiments have been performed with both the C-wall and ILW to vary the heating power over a wide range for plasmas with different shapes.

Challis, C D; Beurskens, M; Buratti, P; Delabie, E; Drewelow, P; Frassinetti, L; Giroud, C; Hawkes, N; Hobirk, J; Joffrin, E; Keeling, D; King, D B; Maggi, C F; Mailloux, J; Marchetto, C; McDonald, D; Nunes, I; Pucella, G; Saarelma, S; Simpson, J

2015-01-01T23:59:59.000Z

432

Design of a wall-less proportional counter for microdosimetry in nanometer dimensions  

E-Print Network [OSTI]

, at nanometer dimensions. The main contribution of this research is the design of a cylindrical wall-less proportional counter of 1mm height by 1mm diameter. A wall-less detector (also called grid-walled detector) overcomes the so-called ¬?wall effect...

Rayadurgam, Sripriya

2006-08-16T23:59:59.000Z

433

Street Address 6955 SW Sandburg Street  

E-Print Network [OSTI]

Management, "Today's global business environment compels companies to consider the impact of their corporate activities and policies on society and the environment. To demonstrate their commitment, many companies, companies must have a tracking system in place so they can tell customers the amount of certified

434

59th STREET 58th STREET  

E-Print Network [OSTI]

Center Level 1 SCorridor Therapy Services Level 1 Adult Admitting Level 2 Radiology X-Ray Level 1 Social PATIENT & VISITOR PARKING GARAGE ENTRANCE COMER CHILDREN'S HOSPITAL PEDIATRIC EMERGENCY ENTRANCE #12;

Mateo, Jill M.

435

The Analysis of Dynamic Thermal Performance of Insulated Wall and Building Cooling Energy Consumption in Guangzhou  

E-Print Network [OSTI]

transfer? W/(m2?K),here it is19.0 W/(m2? K)? The interior surface coefficient of heat transfer ? i is 8.7 W/(m2?K). 2.1.2 Construction of Wall The 3 different walls were analyzed. They are 200mm reinforced concrete (RC) wall, 200mm RC and 50mm... polystyrene board internal insulation wall, 200mm RC and 50mm polystyrene board external insulation wall. Tab. 1 shows the thermal performance of the walls, and Fig. 1 shows the construction sketch map of the wall. Tab. 1 Thermal performance parameter...

Zhao, L.; Li, X.; Li, L.; Gao, Y.

2006-01-01T23:59:59.000Z

436

LASER & PHOTONICS www.lpr-journal.org  

E-Print Network [OSTI]

Zhang Department of Chemistry and Biochemistry, University of California, 1156 High Street, Santa Cruz of hydro- gen is much higher than any other fuel such as gasoline. For one gram of hydrogen, $140 k- portation. Corresponding authors: e-mail: yli@chemistry.ucsc.edu, zhang@chemistry.ucsc.edu © 2010 by WILEY

Li, Yat

437

* Corresponding author. Journal of Quantitative Spectroscopy &  

E-Print Network [OSTI]

*, T.P. Kurosu, K.V. Chance Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge light. The discrete ordinate method is the most commonly used approach for the determination of synthetic measurements and F is a function describing the attenuation of solar and/or thermal emission

Chance, Kelly

438

Finite element analysis of the Arquin-designed CMU wall under a dynamic (blast) load.  

SciTech Connect (OSTI)

The Arquin Corporation designed a CMU (concrete masonry unit) wall construction and reinforcement technique that includes steel wire and polymer spacers that is intended to facilitate a faster and stronger wall construction. Since the construction method for an Arquin-designed wall is different from current wall construction practices, finite element computer analyses were performed to estimate the ability of the wall to withstand a hypothetical dynamic load, similar to that of a blast from a nearby explosion. The response of the Arquin wall was compared to the response of an idealized standard masonry wall exposed to the same dynamic load. Results from the simulations show that the Arquin wall deformed less than the idealized standard wall under such loading conditions. As part of a different effort, Sandia National Laboratories also looked at the relative static response of the Arquin wall, results that are summarized in a separate SAND Report.

Lopez, Carlos; Petti, Jason P.

2008-12-01T23:59:59.000Z

439

A determination of thermal surface resistance of interior walls in intermittently heated buildings  

E-Print Network [OSTI]

?I. 0' ILDlUG G(, NDITION"' G C . ;DIIIOIID ~ ~ ~ ~ ~ 0 ~ ou&Xs' Y ~ ~ ~ ~ ~ ~ ~ ~ ~ o ~ ~ ~ ~ LIT?'"w&FUIm CIT''D ~ ~ ~ ~ e ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ M LIST 07 FIOUBES 1, I Model wall with smooth surfaoe 8 ~ II tlodel wall with painted surfaoe... ~ ~ C 5. III Lfodel wall faoing interior and exterior room walls ~ ~ ~ ~ ~ ~ \\ ~ ~ ~ ~ ~ Page 4. IV Looation of heater with respeot to the mode 1 wall e ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 21 5. Graph I iiverage unit surfaoe oonduotanoe fox smooth surfaoe...

Thomson, John Edmund

1951-01-01T23:59:59.000Z

440

AMERICAN JOURNAL OF FORENSIC PSYCHOLOGY, VOLUME 29, ISSUE 4, 2011 / 1 Copyright 2011 American Journal of Forensic Psychology, Volume 29, Issue 4. The Journal is a  

E-Print Network [OSTI]

AMERICAN JOURNAL OF FORENSIC PSYCHOLOGY, VOLUME 29, ISSUE 4, 2011 / 1 Copyright 2011 American Journal of Forensic Psychology, Volume 29, Issue 4. The Journal is a publication of the American College of Forensic Psychology, PO Box 130458, Carlsbad, Califor- nia 92013. CHANGE IN SUSPECTS MEMORY AS A RESULT

Sheldon, Nathan D.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

"Seismic Behavior and Design of Steel Shear Walls", A. Astaneh-Asl, SEAONC Seminar, November 2001, San Francisco. of 181 Seismic Behavior and Design of Steel Shear Walls  

E-Print Network [OSTI]

"Seismic Behavior and Design of Steel Shear Walls", A. Astaneh-Asl, SEAONC Seminar, November 2001, San Francisco. of 181 Seismic Behavior and Design of Steel Shear Walls By Abolhassan Astaneh-Asl, Ph.ce.berkeley.edu/~astaneh Introduction Steel plate shear wall systems have been used in recent years in highly seismic areas to resist

Astaneh-Asl, Abolhassan

442

Crossed-ratchet effects and domain wall geometrical pinning  

E-Print Network [OSTI]

The motion of a domain wall in a two dimensional medium is studied taking into account the internal elastic degrees of freedom of the wall and geometrical pinning produced both by holes and sample boundaries. This study is used to analyze the geometrical conditions needed for optimizing crossed ratchet effects in periodic rectangular arrays of asymmetric holes, recently observed experimentally in patterned ferromagnetic films. Geometrical calculations and numerical simulations have been used to obtain the anisotropic critical fields for depinning flat and kinked walls in rectangular arrays of triangles. The aim is to show with a generic elastic model for interfaces how to build a rectifier able to display crossed ratchet effects or effective potential landscapes for controlling the motion of interfaces or invasion fronts.

V. I. Marconi; A. B. Kolton; J. A. Capitan; J. A. Cuesta; A. Perez-Junquera; M. Velez; J. I. Martin; J. M. R. Parrondo

2010-12-25T23:59:59.000Z

443

Simulations of Alpha Wall Load in ITER. Final report  

SciTech Connect (OSTI)

The partially DOE funded International Thermonuclear Experimental Reactor (ITER) will produce massive amounts of energetic charged alpha particles, which are imperfectly confined by a strong magnetic field. The wall of the experiment is designed to withstand an estimated wall load from these fusion alpha particles, but the accuracy of this estimate needs to be improved to avoid potentially catastrophic surprises when the experiment becomes operational. We have added a more accurate, gyro-dynamic model of particle motion to the existing drift-dynamic model in the DELTA5D simulation software used for the project. We have also added the ability to load a detailed engineering model of the wall and use it in the simulations.

Carlsson, Johan

2010-10-20T23:59:59.000Z

444

Studies of Resistive Wall Heating at JLAB FEL  

SciTech Connect (OSTI)

When the JLAB FEL is under CW operation, it had been observed that temperature rises over the wiggler vacuum chamber, presumably as the result of the power deposition on the resistive wall of the wiggler chamber. Previous analyses have been done on the resistive wall impedance for various cases, such as DC, AC, and anomalous skin effects*. Here we report an investigation on the beam kinetic energy losses for each of these cases. This study includes the non-ultrarelativistic effect on resistive wall loss, for both round pipe and parallel plates. We will present the comparison of our results with the measured data obtained during CW operation of the JLAB FEL. Other possible factors contributing to the measured heating will also be discussed.

Li, Rui; Benson, Stephen V.

2013-06-01T23:59:59.000Z

445

Microstructure of thin-wall ductile iron castings  

SciTech Connect (OSTI)

The automotive industry is seeking to replace current car parts made of aluminum and iron castings with thin wall (down to 2 mm) iron castings to reduce the cost and weight of automobiles. The mechanical properties of thin wall ductile iron castings are affected strongly by the thickness of the castings. The thinner castings cool at a faster rate, and microstructural features that form during solidification, and subsequently, transform in the solid state, are strongly dependent on a geometrical parameter related to the ratio of surface area-to-volume of the casting. As this ratio becomes larger, castings cool faster. As a result, the nodule count on the observation plane of the specimens increases dramatically (>2000 nodules/mm2 in most specimens), i.e. as the thickness of castings decreases. Also, the matrix of the thin walled ductile iron castings becomes more ferritic as the ratio of surface area-to-volume decreases.

Dogan, Omer N.; Schrems, Karol K.; Hawk, Jeffrey A.; Druschitz, A.P. (Intermet Corp., Lynchburg, VA)

2001-10-01T23:59:59.000Z

446

Qualitative Reliability Issues for Solid and Liquid Wall Fusion Designs  

SciTech Connect (OSTI)

This report is an initial effort to identify issues affecting reliability and availability of solid and liquid wall designs for magnetic fusion power plant designs. A qualitative approach has been used to identify the possible failure modes of major system components and their effects on the systems. A general set of design attributes known to affect the service reliability has been examined for the overview solid and liquid wall designs, and some specific features of good first wall design have been discussed and applied to these designs as well. The two generalized designs compare well in regard to these design attributes. The strengths and weaknesses of each design approach are seen in the comparison of specific features.

Cadwallader, L.C.

2001-01-31T23:59:59.000Z

447

Qualitative Reliability Issues for Solid and Liquid Wall Fusion Design  

SciTech Connect (OSTI)

This report is an initial effort to identify issues affecting reliability and availability of solid and liquid wall designs for magnetic fusion power plant designs. A qualitative approach has been used to identify the possible failure modes of major system components and their effects on the systems. A general set of design attributes known to affect the service reliability has been examined for the overview solid and liquid wall designs, and some specific features of good first wall design have been discussed and applied to these designs as well. The two generalized designs compare well in regard to these design attributes. The strengths and weaknesses of each design approach are seen in the comparison of specific features.

Cadwallader, Lee Charles

2001-01-01T23:59:59.000Z

448

Spin alignment of dark matter haloes in filaments and walls  

E-Print Network [OSTI]

The MMF technique is used to segment the cosmic web as seen in a cosmological N-body simulation into wall-like and filament-like structures. We find that the spins and shapes of dark matter haloes are significantly correlated with each other and with the orientation of their host structures. The shape orientation is such that the halo minor axes tend to lie perpendicular to the host structure, be it a wall or filament. The orientation of the halo spin vector is mass dependent. Low mass haloes in walls and filaments have a tendency to have their spins oriented within the parent structure, while higher mass haloes in filaments have spins that tend to lie perpendicular to the parent structure.

Miguel A. Aragůn-Calvo; Rien van de Weygaert; Bernard J. T. Jones; J. M. Thijs van der Hulst

2006-10-09T23:59:59.000Z

449

Journal of Fluid Mechanics http://journals.cambridge.org/FLM  

E-Print Network [OSTI]

bound for skin-friction drag for control schemes that use surface blowing and suction with zero-net of flow control. Bewley considered zero-net volume-flux blowing or suction at the no-slip walls for a range of Reynolds numbers. Two types of zero net-volume-flux blowing and #12;468 I. Marusic, D. D

Marusic, Ivan

450

Behavior of a full scale tieback wall in sand  

E-Print Network [OSTI]

BEHAVIOR OP A PULL SCALE TIEBACK WALL IN SAND A Thesis by MOONKYUNG CHUNG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1991 Major... Subject: Civil Engineering BEHAUIOR OF A FULL SCALE TIEBACR WALL IN SAND A Thesis MOONKYUNG CHUNG Approved as to style and content by ean-Louis Briaud hair of Committee) Derek V. Morris (Member) Christo her C. Mathewson (Member) Jam T. P. ao...

Chung, Moonkyung

1991-01-01T23:59:59.000Z

451

Earth melter with rubble walls and method of use  

DOE Patents [OSTI]

The present invention is an improvement to the earth melter described and claimed in U.S. Pat. No. 5,443,618. The improvement is the use of rubble for retaining walls. More specifically, the retaining walls rest on ground level and extend above ground level piling rubble around a melt zone. A portion of the melter may be below grade wherein sidewalls are formed by the relatively undisturbed native soil or rock, and the rubble may be used as a backfill liner for the below grade sidewalls.

Chapman, Chris C. (Richland, WA)

1998-01-01T23:59:59.000Z

452

Effect of Trapped Energetic Particles on the Resistive Wall Mode  

SciTech Connect (OSTI)

A stability analysis for the resistive wall mode is studied in the presence of trapped energetic particles (EPs). When the EPs' beta exceeds a critical value, a fishbonelike bursting mode (FLM) with an external kink eigenstructure can exist. This offers the first analytic interpretation of the experimental observations [Phys. Rev. Lett. 103, 045001 (2009)]. The mode-particle resonances for the FLM and the q=1 fishbone occur in different regimes of the precession frequency of EPs. In certain ranges of the plasma rotation speed and the EPs' beta, a mode conversion can occur between the resistive wall mode and FLM.

Hao, G. Z.; Wang, A. K.; Qiu, X. M. [Southwestern Institute of Physics, Post Office Box 432, Chengdu 610041 (China); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2011-07-01T23:59:59.000Z

453

420 W. 118th Street, New York, New York 10027 | energypolicy.columbia.edu | @ColumbiaUEnergy Center on Global Energy Policy  

E-Print Network [OSTI]

Mayor of New York City Dr. Ernest J. Moniz, U.S. Secretary of Energy Thomas E. Donilon, former National420 W. 118th Street, New York, New York 10027 | energypolicy.columbia.edu | @ColumbiaUEnergy CenterUEnergy #12;thE ChAnGinG EnErGy lAndsCAPE 1Center on Global Energy Policy | "Global leaders must now craft new

Qian, Ning

454

Examples of cooler reflective streets for urban heat-island mitigation : Portland cement concrete and chip seals  

SciTech Connect (OSTI)

Part of the urban heat island effect can be attributed to dark pavements that are commonly used on streets and parking lots. In this paper we consider two light colored, hence cooler, alternative paving materials that are in actual use in cities today. These are Portland cement concrete (PCC) pavements and chip seals. We report measurements of the albedos of some PCC and chip sealed pavements in the San Francisco Bay Area. The albedos of the PCC pavements ranged from about 0.18 to 0.35. The temperatures of some PCC pavements are also measured and calculated. We then consider how the albedos of the constituent materials of the PCC (stone, sand and cement) contribute to the albedos of the resulting finished concrete. The albedos of a set of chip sealed pavements in San Jose, CA, were measured and correlated with the times of their placement. It is found that the albedos decrease with age (and use) but remain higher than that of standard asphalt concrete (AC) for about five years. After t hat, the albedos of the chip seals are about 0.12, similar to aged AC. The fact that many PCC pavements have albedos at least twice as high as aged AC suggests that it is possible to have pavement albedos that remain high for many years.

Pomerantz, M.; Akbari, H.; Chang, S.-C.; Levinson, R.; Pon, B.

2003-04-30T23:59:59.000Z

455

LETTER REPORT. INDEPENDENT CONFIRMATORY SURVEY RESULTS OF SOILS ASSOCIATED WITH THE ARGYLE STREET SEWER LINE AT THE UNITED NUCLEAR CORPORATION NAVAL PRODUCTS SITE, NEW HAVEN, CONNECTICUT  

SciTech Connect (OSTI)

Oak Ridge Institute for Science and Education (ORISE) personnel visited the United Nuclear Corporation (UNC) Naval Products site on three separate occasions during the months of October and November 2011. The purpose of these visits was to conduct confirmatory surveys of soils associated with the Argyle Street sewer line that was being removed. Soil samples were collected from six different, judgmentally determined locations in the Argyle Street sewer trench. In addition to the six soil samples collected by ORISE, four replicate soil samples were collected by Cabrera Services, Inc. (CSI) for analysis by the ORISE laboratory. Replicate samples S0010 and S0011 were final status survey (FSS) bias samples; S0012 was an FSS systematic sample; and S0015 was a waste characterization sample. Six soil samples were also collected for background determination. Uranium-235 and uranium-238 concentrations were determined via gamma spectroscopy; the spectra were also reviewed for other identifiable photopeaks. Radionuclide concentrations for these soil samples are provided. In addition to the replicate samples and the samples collected by ORISE, CSI submitted three soil samples for inter-laboratory comparison analyses. One sample was from the background reference area, one was from waste characterization efforts (material inside the sewer line), and one was a FSS sample. The inter-laboratory comparison analyses results between ORISE and CSI were in agreement, except for one sample collected in the reference area. Smear results For Argyle Street sewer pipes are tabulated.

Adams, Wade C.

2012-01-24T23:59:59.000Z

456

Method of controlling the side wall thickness of a turbine nozzle segment for improved cooling  

DOE Patents [OSTI]

A gas turbine nozzle segment has outer and inner bands and a vane extending therebetween. Each band has a side wall, a cover and an impingement plate between the cover and nozzle wall defining two cavities on opposite sides of the impingement plate. Cooling steam is supplied to one cavity for flow through apertures of the impingement plate to cool the nozzle wall. The side wall of the band has an inturned flange defining with the nozzle wall an undercut region. The outer surface of the side wall is provided with a step prior to welding the cover to the side wall. A thermal barrier coating is applied in the step and, after the cover is welded to the side wall, the side wall is finally machined to a controlled thickness removing all, some or none of the coating.

Burdgick, Steven Sebastian (Schenectady, NY)

2002-01-01T23:59:59.000Z

457

WELDING RESEARCH ~----------------------~--~ SUPPLEMENT TO THE WELDING JOURNAL. FEBRUARY 1990  

E-Print Network [OSTI]

J ) WELDING RESEARCH ~----------------------~--~ SUPPLEMENT TO THE WELDING JOURNAL. FEBRUARY 1990 Sponsored by the American Welding Society and the Welding Research Council All papers published in the Welding Journal's Welding Research Supplement undergo Peer Review before publication for: I) originality

Eagar, Thomas W.

458

Natural Language Engineering http://journals.cambridge.org/NLE  

E-Print Network [OSTI]

Natural Language Engineering http://journals.cambridge.org/NLE Additional services for Natural1351324912000289 Request Permissions : Click here Downloaded from http://journals.cambridge.org/NLE, IP address information retrieval (search with Google, Bing, etc.), but

Bergler, Sabine

459

Ranking forestry journals using the h-index  

E-Print Network [OSTI]

An expert ranking of forestry journals was compared with journal impact factors and h-indices computed from ISI and internet-based data. Citations reported by Google Scholar appear to offer the most efficient way to rank all journals objectively, in a manner consistent with other indicators. A ranking of 180 forestry journals is presented, on the basis of an h-index computed from data supplied by Google Scholar.

Vanclay, Jerome K

2007-01-01T23:59:59.000Z

460

Functionalized Few-Walled Carbon Nanotubes for Mechanical  

E-Print Network [OSTI]

Functionalized Few-Walled Carbon Nanotubes for Mechanical Reinforcement of Polymeric Composites Ye the application of such materials as reinforcing fillers in polyvinyl alcohol (PVA)- based composites. The results-polymer composites has remained elusive. In this study, free-standing carbon nanotubes (CNTs)/polymer composite films

Liu, Jie

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Turbulence Structure and Wall Signature in Hypersonic Turbulent Boundary Layer  

E-Print Network [OSTI]

Turbulence Structure and Wall Signature in Hypersonic Turbulent Boundary Layer Yin-Chiu Kan , Clara and hypersonic turbulent boundary layer datasets from direct numerical simulation (DNS). Contour plots and Marusic5 and Mathis, Hutchins and Marusic16 ). In contrast to supersonic and hypersonic flow regimes

Martín, Pino

462

Turbulence Structure and Wall Signature in Hypersonic Boundary Layer  

E-Print Network [OSTI]

Turbulence Structure and Wall Signature in Hypersonic Boundary Layer Yin-Chiu Kan , Beekman Izaak and low- speed features, found in subsonic experiments, are present in our supersonic and hypersonic and hypersonic regimes due to the lack of detailed flow field data, and the studies have been mostly restricted

Martín, Pino

463

Supersymmetric vertex models with domain wall boundary conditions  

SciTech Connect (OSTI)

By means of the Drinfeld twists, we derive the determinant representations of the partition functions for the gl(1 vertical bar 1) and gl(2 vertical bar 1) supersymmetric vertex models with domain wall boundary conditions. In the homogeneous limit, these determinants degenerate to simple functions.

Zhao Shaoyou; Zhang Yaozhong [Department of Mathematics, University of Queensland, Brisbane, QLD 4072 (Australia); Department of Mathematics, University of Queensland, Brisbane, QLD 4072 (Australia) and Physikalisches Institut, Universitaet Bonn, D-53115 Bonn (Germany)

2007-02-15T23:59:59.000Z

464

Radial elasticity of multi-walled boron nitride nanotubes  

SciTech Connect (OSTI)

We investigated the radial mechanical properties of multi-walled boron nitride nanotubes (MW-BNNTs) using atomic force microscopy. The employed MW-BNNTs were synthesized using pressurized vapor/condenser (PVC) methods and were dispersed in aqueous solution using ultrasonication methods with the aid of ionic surfactants. Our nanomechanical measurements reveal the elastic deformational behaviors of individual BNNTs with two to four tube walls in their transverse directions. Their effective radial elastic moduli were obtained through interpreting their measured radial deformation profiles using Hertzian contact mechanics models. Our results capture the dependences of the effective radial moduli of MW-BNNTs on both the tube outer diameter and the number of tube layers. The effective radial moduli of double-walled BNNTs are found to be several-fold higher than those of single-walled BNNTs within the same diameter range. Our work contributes directly to a complete understanding of the fundamental structural and mechanical properties of BNNTs and the pursuits of their novel structural and electronics applications.

Michael W. Smith, Cheol Park, Meng Zheng, Changhong Ke ,In-Tae Bae, Kevin Jordan

2012-02-01T23:59:59.000Z

465

Energy-momentum balance in particle - domain wall perforating collision  

E-Print Network [OSTI]

We investigate the energy-momentum balance in the perforating collision of a point particle with an infinitely thin planar domain wall within the linearized gravity in arbitrary dimensions. Since the metric of the wall increases with distance, the wall and the particle are never free, and their energy-momentum balance involves not only the instantaneous kinetic momenta, but also the non-local contribution of gravitational stresses. However, careful analysis shows that the stresses can be unambiguously divided between the colliding objects leading to definition of the gravitationally dressed momenta. These take into account for gravity in the same way as the potential energy does in the non-relativistic theory, but our treatment is fully relativistic. Another unusual feature of our problem is the non-vanishing flux of the total energy-momentum tensor through the lateral surface of the world tube. In this case the zero divergence of the energy-momentum tensor does not imply conservation of the total momentum defined as the integral over the space-like section of the tube. But one can still define the conservation low infinitesimally, passing to time derivatives of the momenta. Using this definition we establish the momentum balance in terms of the dressed particle and wall momenta.

D. V. Gal'tsov; E. Yu. Melkumova; P. A. Spirin

2015-02-10T23:59:59.000Z

466

Electrochemical and Raman measurements on single-walled carbon nanotubes  

E-Print Network [OSTI]

Electrochemical and Raman measurements on single-walled carbon nanotubes M. Stoll a,*, P performed on a carbon nanotube mat as a working electrode using different salt solutions. The gravimetric capacitance of the nanotube material was estimated and its effective surface area was de- termined in a purely

Nabben, Reinhard

467

THE ELECTRONIC PROPERTIES OF MULTI-WALLED CARBON NANOTUBES  

E-Print Network [OSTI]

THE ELECTRONIC PROPERTIES OF MULTI-WALLED CARBON NANOTUBES A Thesis Submitted to the Faculty I #12;rst started. I also thank Michael Buss for his insight and for making my #12;rst nanotube family for the many yawns and blank stares at the mention of the word nanotube. At least they listened

468

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents [OSTI]

An instrument is described for the measurement of vacuum within sealed packets, the packets having a wall sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall, with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum reference plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A packet production line model is also described. 3 figures.

Kollie, T.G.; Thacker, L.H.; Fine, H.A.

1993-10-05T23:59:59.000Z

469

accelerator wall materials: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

accelerator wall materials First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Summary of SLAC'S SEY...

470

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH  

E-Print Network [OSTI]

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH Michel Bruneau, P.E. 1 Dr. Bruneau is conducting research on the seismic evaluation and retrofit of existing steel bridges, steel of this research, and has co- authored the book "Ductile Design of Steel Structures" published in 1997 by Mc

Bruneau, Michel

471

Gravitational collapse and thermalization in the hard wall model  

E-Print Network [OSTI]

We study a simple example of holographic thermalization in a confining field theory: the homogeneous injection of energy in the hard wall model. Working in an amplitude expansion, we find black brane formation for sufficiently fast energy injection and a scattering wave solution for sufficiently slow injection. We comment on our expectations for more sophisticated holographic QCD models.

Ben Craps; Elias Kiritsis; Christopher Rosen; Anastasios Taliotis; Joris Vanhoof; Hongbao Zhang

2014-03-03T23:59:59.000Z

472

SpinybotII: Climbing Hard Walls with Compliant Microspines  

E-Print Network [OSTI]

of these approaches is suitable for porous and typically dusty exterior surfaces such as brick, concrete, stucco, hard vertical surfaces including concrete, brick, stucco and masonry without using suction or adhesives demonstrated on brick and concrete walls [11] with considerable success. However, this approach consumes

Provancher, William

473

Interactive Weather Simulation and Visualization on a Display Wall  

E-Print Network [OSTI]

.hoai.ha,john.markus.bjorndalen,otto.anshus}@uit.no, {tormsh,daniels}@cs.uit.no Abstract. Numerical Weather Prediction models (NWP) used for op- erational Weather Model, WRF, Tiled Display Walls, Live Data Sets, On-Demand Computation. 1 Introduction Numerical Weather Prediction models for use in weather forecasting centers are often computed for a fixed static

Ha, Phuong H.

474

Between Facebook and JPMorgan, Wall St. woes By PALLAVI GOGOI  

E-Print Network [OSTI]

Between Facebook and JPMorgan, Wall St. woes mount By PALLAVI GOGOI The Associated Press Updated: 5 public offering of Facebook stock last week, which was fumbled by the banks that managed the deal against Facebook and Morgan Stanley, the bank that shepherded the IPO, over reports that it withheld

Belogay, Eugene A.

475

arterial wall dynamics: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

wall dynamics First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Viscoelastic Models for Passive Arterial...

476

Observational Constraints on Varying-alpha Domain Walls  

E-Print Network [OSTI]

We consider the possibility that current hints of a spatial variation of the fine structure constant at high redshift could be due to a biased domain wall network described by a scalar field non-minimally coupled to the electromagnetic field. We show that in order to be cause of the reported spatial variation of the fine structure constant without being in conflict with the observed anisotropies of the cosmic microwave background, the characteristic scale of the network would have to be of the order of the Hubble radius and the fractional contribution of the domain wall network to the energy density of the Universe would need to be in the range $10^{-10} temperature distribution of the cosmic microwave background detected by Planck and WMAP and provide a significant contribution to the excess B-mode polarisation power detected by BICEP2. Since the domain wall contribution to the cosmic energy budget only becomes important at late times, domain wall networks cannot play a significant role as a seed for large scale structure formation and primary cosmic microwave background anisotropies.

P. P. Avelino; L. Sousa

2014-06-20T23:59:59.000Z

477

Transpiring wall supercritical water oxidation reactor salt deposition studies  

SciTech Connect (OSTI)

Sandia National Laboratories has teamed with Foster Wheeler Development Corp. and GenCorp, Aerojet to develop and evaluate a new supercritical water oxidation reactor design using a transpiring wall liner. In the design, pure water is injected through small pores in the liner wall to form a protective boundary layer that inhibits salt deposition and corrosion, effects that interfere with system performance. The concept was tested at Sandia on a laboratory-scale transpiring wall reactor that is a 1/4 scale model of a prototype plant being designed for the Army to destroy colored smoke and dye at Pine Bluff Arsenal in Arkansas. During the tests, a single-phase pressurized solution of sodium sulfate (Na{sub 2}SO{sub 4}) was heated to supercritical conditions, causing the salt to precipitate out as a fine solid. On-line diagnostics and post-test observation allowed us to characterize reactor performance at different flow and temperature conditions. Tests with and without the protective boundary layer demonstrated that wall transpiration provides significant protection against salt deposition. Confirmation tests were run with one of the dyes that will be processed in the Pine Bluff facility. The experimental techniques, results, and conclusions are discussed.

Haroldsen, B.L.; Mills, B.E.; Ariizumi, D.Y.; Brown, B.G. [and others

1996-09-01T23:59:59.000Z

478

Liquid Wall Science in other Scientific Pursuits and Applications  

E-Print Network [OSTI]

/sheet/ribbon/sphere casting, flood/jet soldering, ocean waves, hull design, ocean/river hydraulic engineering, surfing, liquid, wetted-wall absorbers/chemical reactor, condensers, vertical tube evaporator, film cooling of turbine vortices; ∑Low Joule and Viscous dissipation; ∑Insignificant effect on the hydraulic drag. 2-D turbulence

Abdou, Mohamed

479

LIST OF JOURNAL PUBLICATIONS Mark Aindow  

E-Print Network [OSTI]

1 LIST OF JOURNAL PUBLICATIONS Mark Aindow 1987 1. Hexagonal Crystallography and Interphase, J Micros Res Tech 23: 98-99 (1992). 10. The Use of Electrochemical Scanning Tunneling Microscopy

Alpay, S. Pamir

480

August 12, 2010 11:8 Journal of Applied Statistics Draft.5 Journal of Applied Statistics  

E-Print Network [OSTI]

August 12, 2010 11:8 Journal of Applied Statistics Draft.5 Journal of Applied Statistics Vol. 00 of Victoria, PO Box 3060, Victoria, B.C., Canada V8W 3R4; (July, 2009) A new parametric (3-parameter) survival Taylor & Francis DOI: 10.1080/0266476YYxxxxxxxx http://www.informaworld.com #12;August 12, 2010 11

Reed, W.J.

Note: This page contains sample records for the topic "wall street journal" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

An XFEM Model for Carbon Sequestration Journal: International Journal for Numerical Methods in Engineering  

E-Print Network [OSTI]

PeerReview Only An XFEM Model for Carbon Sequestration Journal: International Journal for Numerical method, Carbon Sequestration, Multiphase flow, XFEM, Multifield systems, Petrov-Galerkin httpScience (www.interscience.wiley.com). DOI: 10.1002/nme An XFEM Model for Carbon Sequestration Chris Ladubec

Gracie, Robert

482

Modeling of Spherical Torus Plasmas for Liquid Lithium Wall Experiments  

SciTech Connect (OSTI)

Liquid metal walls have the potential to solve first-wall problems for fusion reactors, such as heat load and erosion of dry walls, neutron damage and activation, and tritium inventory and breeding. In the near term, such walls can serve as the basis for schemes to stabilize magnetohydrodynamic (MHD) modes. Furthermore, the low recycling characteristics of lithium walls can be used for particle control. Liquid lithium experiments have already begun in the Current Drive eXperiment-Upgrade (CDX-U). Plasmas limited with a toroidally localized limiter have been investigated, and experiments with a fully toroidal lithium limiter are in progress. A liquid surface module (LSM) has been proposed for the National Spherical Torus Experiment (NSTX). In this larger ST, plasma currents are in excess of 1 MA and a typical discharge radius is about 68 cm. The primary motivation for the LSM is particle control, and options for mounting it on the horizontal midplane or in the divertor region are under consideration. A key consideration is the magnitude of the eddy currents at the location of a liquid lithium surface. During plasma start up and disruptions, the force due to such currents and the magnetic field can force a conducting liquid off of the surface behind it. The Tokamak Simulation Code (TSC) has been used to estimate the magnitude of this effect. This program is a two dimensional, time dependent, free boundary simulation code that solves the MHD equations for an axisymmetric toroidal plasma. From calculations that match actual ST equilibria, the eddy current densities can be determined at the locations of the liquid lithium. Initial results have shown that the effects could be significant, and ways of explicitly treating toroidally local structures are under investigation.

R. Kaita; S. Jardin; B. Jones; C. Kessel; R. Majeski; J. Spaleta; R. Woolley; L. Zakharo; B. Nelson; M. Ulrickson

2002-01-29T23:59:59.000Z

483

Gas mixing in the wall layer of a CFB boiler  

SciTech Connect (OSTI)

Tracer-gas measurements were carried out in the transport zone of a 12 MW CFB boiler with special emphasis on the wall-layer flow. Helium (He) was used as tracer gas and a mass spectrometer was used to determine the He-concentrations. The primary gas velocity, U{sub 0}, was 1.2, 2.6 and 4.3 m/s (no secondary air) and the bed material was silica sand with an average particle diameter of 0.32 mm. Tracer gas was injected at different distances from one of the furnace walls and sampled above and below the injection level. In the wall layer, tracer-gas concentrations were detected above (C{sub above}) as well as below (C{sub below}) the injection height for all operating conditions, i.e., the gas flows both up and down from the injection point. The data show that the net flow of tracer gas in the wall layer depends on the operating conditions, and the concentration ratio of the down- and up-flowing gas, {psi} = C{sub below}/C{sub above}, decreases with increased gas velocity ({psi} > 1 for U{sub 0} = 1.2 m/s, {psi} {approx} 1 for U{sub 0} = 2.6 m/s and {psi} < 1 for U{sub 0} = 4.3 m/s). There exists a gas exchange between the core region and the wall-layer. A plug flow model applied to the core region gives a radial dispersion coefficient, D{sub r}, in the range of 0.015--0.025 m{sup 2}/s which is higher than the D{sub r} values reported in literature which are below 0.01 m{sup 2}/x. However, the latter values were obtained in tall and narrow risers.

Sterneus, J.; Johnsson, F. [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Energy Conversion

1997-12-31T23:59:59.000Z

484

PLoS Computational Biology: A New Community Journal  

E-Print Network [OSTI]

Editorial PLoS Computational Biology: A New Community Journal Philip E. Bourne, Steven E. Brenner, Michael B. Eisen W elcome to PLoS Computation- al Biology, a community journal from the Public Li- brary of Science dedicated to reporting biological advances achieved through computation. The journal is published

485

Hindawi Publishing Corporation International Journal of Biomedical Imaging  

E-Print Network [OSTI]

Hindawi Publishing Corporation International Journal of Biomedical Imaging Volume 2006, Article ID, functional, cel- lular, and molecular imaging. The overall goal of the Inter- national Journal of Biomedical the current imaging journals handle. In addition, there are new imag- ing areas that are not specifically

Virginia Tech

486

http://ijr.sagepub.com The International Journal of Robotics  

E-Print Network [OSTI]

http://ijr.sagepub.com Research The International Journal of Robotics DOI: 10.1177/0278364908097586 2009; 28; 558The International Journal of Robotics Research Adriano Cavalcanti, Bijan Shirinzadeh://www.sagepublications.com On behalf of: Multimedia Archives can be found at:The International Journal of Robotics Research

Guo, Yi

487

http://ijr.sagepub.com The International Journal of Robotics  

E-Print Network [OSTI]

http://ijr.sagepub.com Research The International Journal of Robotics DOI: 10.1177/0278364908100926 2009; 28; 512The International Journal of Robotics Research A.A.G. Requicha, D.J. Arbuckle, B. Mokaberi://www.sagepublications.com On behalf of: Multimedia Archives can be found at:The International Journal of Robotics Research

Southern California, University of

488

http://jla.sagepub.com/ Journal of Laboratory Automation  

E-Print Network [OSTI]

http://jla.sagepub.com/ Journal of Laboratory Automation http://jla.sagepub.com/content/early/2012 2012Journal of Laboratory Automation Timothy J. Bunning and Tony Jun Huang Yan Jun Liu, Mengqian Lu://www.sagepublications.com On behalf of: Society for Laboratory Automation and Screening can be found at:Journal of Laboratory

Demirel, Melik C.

489

Combined Honours BA Digital Journalism and Communication, Media, and Film  

E-Print Network [OSTI]

Combined Honours BA Digital Journalism and Communication, Media, and Film Are you looking in Digital Journalism (DJ) and Communication, Media, and Film (CMF) is for you. That's because our DJ Honours BA Digital Journalism and Communication, Media, and Film We look forward to meeting you! Student

490

SC e-journals, Bioinformatics  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516 * U C

491

SC e-journals, Chemistry  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516 * UChemistry

492

SC e-journals, Engineering  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516 *Engineering ACM

493

SC e-journals, Environment  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516 *Engineering

494

SC e-journals, Mathematics  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516Mathematics ACM

495

SC e-journals, Medicine  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516Mathematics

496

SC e-journals, Nuclear  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding accessProposal2-42601-0516MathematicsNuclear

497

SC e-journals, Physics  

Office of Scientific and Technical Information (OSTI)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: CrystalFG36-08GO18149Speeding

498

Journal Articles | The Ames Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfraredJeffersonJonathan Pershing About Uscompressed hydrogenStructureJournal

499

Journal of Undergraduate Research, Volume VI, 2006  

SciTech Connect (OSTI)

Students who conducted research at DOE National Laboratories during 2005 were invited to include their research abstracts, and for a select few, their completed research papers in this Journal. This Journal is direct evidence of students collaborating with their mentors. Fields in which these students worked include: Biology; Chemistry; Computer Science; Engineering; Environmental Science; General Sciences; Materials Sciences; Medical and Health Sciences; Nuclear Sciences; Physics; and Science Policy.

Faletra, P.; Schuetz, A.; Cherkerzian, D.; Clark, T.

2006-01-01T23:59:59.000Z

500

Macrophage imbalance (M1 vs. M2) and upregulation of mast cells in wall of ruptured human cerebral aneurysms: preliminary results  

E-Print Network [OSTI]

Cite this article as: Hasan et al. : Macrophage imbalance (JOURNAL OF NEUROINFLAMMATION Hasan et al. Journal ofpreliminary results David Hasan 1,4* , Nohra Chalouhi 2 ,

Hasan, David; Chalouhi, Nohra; Jabbour, Pascal; Hashimoto, Tomoki

2012-01-01T23:59:59.000Z