Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Brick Walls and AdS/CFT  

E-Print Network (OSTI)

We discuss the relationship between the bulk-boundary correspondence in Rehren's algebraic holography (and in other 'fixed-background' approaches to holography) and in mainstream 'Maldacena AdS/CFT'. Especially, we contrast the understanding of black-hole entropy from the viewpoint of QFT in curved spacetime -- in the framework of 't Hooft's 'brick wall' model -- with the understanding based on Maldacena AdS/CFT. We show that the brick-wall modification of a Klein Gordon field in the Hartle-Hawking-Israel state on 1+2-Schwarzschild AdS (BTZ) has a well-defined boundary limit with the same temperature and entropy as the brick-wall-modified bulk theory. One of our main purposes is to point out a close connection, for general AdS/CFT situations, between the puzzle raised by Arnsdorf and Smolin regarding the relationship between Rehren's algebraic holography and mainstream AdS/CFT and the puzzle embodied in the 'correspondence principle' proposed by Mukohyama and Israel in their work on the brick-wall approach to black hole entropy. Working on the assumption that similar results will hold for bulk QFT other than the Klein Gordon field and for Schwarzschild AdS in other dimensions, and recalling the first author's proposed resolution to the Mukohyama-Israel puzzle based on his 'matter-gravity entanglement hypothesis', we argue that, in Maldacena AdS/CFT, the algebra of the boundary CFT is isomorphic only to a proper subalgebra of the bulk algebra, albeit (at non-zero temperature) the (GNS) Hilbert spaces of bulk and boundary theories are still the 'same' -- the total bulk state being pure, while the boundary state is mixed (thermal). We also argue from the finiteness of its boundary (and hence, on our assumptions, also bulk) entropy at finite temperature, that the Rehren dual of the Maldacena boundary CFT cannot itself be a QFT and must, instead, presumably be something like a string theory.

Bernard S. Kay; L. Ortiz

2014-05-22T23:59:59.000Z

2

Experimental cosiderations regarding brick masonry structural walls consolidating  

Science Journals Connector (OSTI)

This paper aims at giving a succinct presentation of some aspects regarding the advantages of the brick masonry walls, which makes their consolidation necessary and realistic in case of damage. Secondly, various solutions are presented for strengthening, ... Keywords: consolidation, ferrocement, micro-concrete, structure measurement

Gavrila Muntean; Radu Muntean; Traian Onet

2009-05-01T23:59:59.000Z

3

The Electric Analog Simulation of the Fire Testing of a Four-Inch Brick Wall  

E-Print Network (OSTI)

, 2 0 The literature references on industrial furnaces suggests this figure (6) The resistance-capacitance network representing the brick wall consists of ten sections (See Figure 5) The overall resistance-capacitance product (RC product...

Sherman, Robert Miller

1960-01-01T23:59:59.000Z

4

Measure Guideline: Installing Rigid Foam Insulation on the Interior of Existing Brick Walls  

SciTech Connect

This measure guideline provides information on an effective method to insulate the interior of existing brick masonry walls with extruded polystyrene (XPS) insulation board. The guide outlines step-by-step design and installation procedures while explaining the benefits and tradeoffs where applicable. The authors intend that this document be useful to a varied audience that includes builders, remodelers, contractors and homeowners.

Natarajan, H.; Klocke, S.; Puttagunta, S.

2012-06-01T23:59:59.000Z

5

Self-Assembly of Molecular Brick Wall and Molecular Honeycomb from Nickel(II) Macrocycle and 1,3,5-Benzenetricarboxylate  

E-Print Network (OSTI)

Self-Assembly of Molecular Brick Wall and Molecular Honeycomb from Nickel(II) Macrocycle and 130N6O2)]3[C6H3(COO)3]2,14H2O,2C5H5N (2), respec- tively, have been constructed by the self-assembly anti-ferromagnetic interactions between the S ) 1 Ni(II) paramagnetic centers. Introduction Self-assembled

Paik Suh, Myunghyun

6

Feasibility evaluation of fired brick technology as a construction material and income-generating industry in Northern Ghana  

E-Print Network (OSTI)

This work evaluates the potential to develop fired brick production in the Northern Region of Ghana. While several brick factories operate in southern Ghana, no factories are known to exist in northern Ghana, which remains ...

Bates, Caroline Nijole

2014-01-01T23:59:59.000Z

7

Method of forming ceramic bricks  

DOE Patents (OSTI)

A method for forming free standing ceramic bricks for use as tritium breeder material is disclosed. Aqueous solutions of sodium carbonate and potassium carbonate are mixed with an organic hydrocolloid dispersion and powdered lithium carbonate, spray dried, and ceramic bricks formed by molding in a die and firing.

Poeppel, R.B.; Claar, T.D.; Silkowski, P.

1987-04-22T23:59:59.000Z

8

Wall System Innovations: Familiar Materials, Better Performance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Wall System Innovation Vladimir Kochkin Joseph Wiehagen April 2013 Wall Innovation Metrics  High R (thermal and air barrier)  High Performance  Durable, structural  Build-able  Low transition risk to builders  50% Building America Goal  ≈ R25+ (CZ 4 and higher) 2 Background  Technologies for high-R walls have been proposed and used for over 25 years  But real market penetration is very low  Often the last EE measure implemented by builders (e.g. E*) 3 Background  High-R wall solutions have not achieved a broad level of standardization and commonality  A large set of methods and materials entered the market  Multiple and conflicting details  Wall characteristics are more critical = RISK 4 New Home Starts -

9

A review on Phase Change Materials Integrated in Building Walls  

E-Print Network (OSTI)

A review on Phase Change Materials Integrated in Building Walls Fr´ed´eric Kuznika, , Damien Davida review of the integration of phase change materials in building walls. Many considerations are discussed in this paper including physical considerations about building envelop and phase change material, phase change

10

Experimental and Numerical Study of a Usual Brick Filled with PCM to Improve the Thermal Inertia of Buildings  

Science Journals Connector (OSTI)

Abstract The integration of a PCM layer into an external building wall diminished the amplitude of the instantaneous heat flux through the wall. The types of PCM, its location in the wall and its amount, have been studied in this paper. A two-dimensional transient heat transfer model has been developed and solved numerically using the commercial Computational Fluid Dynamics (CFD) package Fluent. The numerical results have been verified and validated with an experimental model. The considered model consists of usual brick with square holes used as construction materials for residential buildings in Algeria, some of these square holes are filled with PCM. The results showed that the PCM introduced in square holes can improves considerably the thermal inertia of brick and a combination of the types of PCM, its location in the wall and its amount, is very important for improve reduction of heat gain before it reaches the indoor space.

Necib Hichem; Settou Noureddine; Saifi Nadia; Damene Djamila

2013-01-01T23:59:59.000Z

11

DEVELOPMENT OF A QUANTITATIVE MEASURE OF THE FUNCTIONALITY OF FRAME WALLS ENHANCED WITH PHASE CHANGE MATERIALS USING A DYNAMIC WALL SIMULATOR  

E-Print Network (OSTI)

into the conditioned space. PCMs have been typically incorporated into the building structure in the form of impregnated masonry (brick or concrete block) or gypsum board in walls, ceilings, and floors [5]. PCMs have been macro-encapsulated in containers... suitable for energy storage applications. Zhang, et al. [10] tested the performance of macroencapsulated PCMs by developing a frame wall that incorporated paraffin PCM encapsulated in pipes. Two small-scale test houses were constructed to compare...

Evers, Angela C.

2008-07-25T23:59:59.000Z

12

Decontaminating lead bricks and shielding  

SciTech Connect

Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially of planned decommissioning operations. Thus lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for contaminated lead is removing the superficial layer of contamination with an abrasive medium under pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a scaled-off area. The slurry of abrasive and particles of lead falls through a floor and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

Lussiez, G.

1994-02-01T23:59:59.000Z

13

Decontaminating lead bricks and shielding  

SciTech Connect

Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

Lussiez, G.W.

1993-05-01T23:59:59.000Z

14

Decontaminating lead bricks and shielding  

SciTech Connect

Lead used for shielding is often surface contaminated with radioisotopes and is therefore a RCRA D008 mixed waste. The technology-based standard for treatment is macroencapsulation. However, decontaminating and recycling the clean lead is a more attractive solution. Los Alamos National Laboratory decontaminates material and equipment contaminated with radioisotopes. Decontaminating lead poses special problems because of the RCRA hazard classification and the size of the inventory, now about 50 tons and likely to grow substantially because of planned decommissioning operations. This lead, in the form of bricks and other shield shapes, is surface contaminated with fission products. One of the best methods for decontaminating lead is removing the thin superficial layer of contamination with an abrasive medium trader pressure. For lead, a mixture of alumina with water and air at about 40 psig rapidly and effectively decontaminates the lead. The abrasive medium is sprayed onto the lead in a sealed-off area. The slurry of abrasive and particles of lead falls through a floor grating and is collected in a sump. A pump sends the slurry mixture back to the spray gun, creating a continuous process. The process generates small volumes of contaminated lead slurry that can be solidified and, because it passes the TCLP, is not a mixed waste. The decontaminated lead can be released for recycling.

Lussiez, G.W.

1993-01-01T23:59:59.000Z

15

The Thermal Insulation Properties for Wall Material with Various Water Contents  

Science Journals Connector (OSTI)

The thermal conductivities of wall material were measured under various water contents to investigate the effect of water content on the thermal insulation properties. The results show that water contents have adverse impact to heat insulation of wall ... Keywords: the thermal conductivity, water contents, the thermal insulation properties

Zhang Chuancheng; Lu Haijun

2010-05-01T23:59:59.000Z

16

Plasmawall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials  

Science Journals Connector (OSTI)

Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJm?2 and implant more than 1018particlesm?2 in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the expected threats: heating, fatigue, cracking, formation of defects, retention of light species, swelling and erosion. Current and novel radiation resistant materials for the first wall need to be validated under realistic conditions. However, at present there is a lack of facilities which can reproduce such ion environments.This contribution proposes the use of ultra-intense lasers and high-intense pulsed ion beams (HIPIB) to recreate the plasma conditions in LIF reactors. By target normal sheath acceleration, ultra-intense lasers can generate very short and energetic ion pulses with a spectral distribution similar to that of the inertial fusion ion bursts, suitable to validate fusion materials and to investigate the barely known propagation of those bursts through background plasmas/gases present in the reactor chamber. HIPIB technologies, initially developed for inertial fusion driver systems, provide huge intensity pulses which meet the irradiation conditions expected in the first wall of LIF chambers and thus can be used for the validation of materials too.

J Alvarez Ruiz; A Rivera; K Mima; D Garoz; R Gonzalez-Arrabal; N Gordillo; J Fuchs; K Tanaka; I Fernndez; F Briones; J Perlado

2012-01-01T23:59:59.000Z

17

Building Physical Chemistry with BRICKs  

Science Journals Connector (OSTI)

Publication Date (Web): November 20, 2014 ... (B) Contributions of individual BRICK countries during 2013 in JPC A/B/C/L (Source: Web of Science, Thomson Reuters). ... The numbers in parentheses in the legend are the total numbers of published papers (Source: Web of Science, Thomson Reuters). ...

Prashant V. Kamat; George C. Schatz

2014-11-20T23:59:59.000Z

18

Wall surveyor project report  

SciTech Connect

A report is made on the demonstration of a first-generation Wall Surveyor that is capable of surveying the interior and thickness of a stone, brick, or cement wall. LLNL`s Micropower Impulse Radar is used, based on emitting and detecting very low amplitude and short microwave impulses (MIR rangefinder). Six test walls were used. While the demonstrator MIR Wall Surveyor is not fieldable yet, it has successfully scanned the test walls and produced real-time images identifying the walls. It is planned to optimize and package the evaluation wall surveyor into a hand held unit.

Mullenhoff, D.J.; Johnston, B.C.; Azevedo, S.G.

1996-02-22T23:59:59.000Z

19

Textured coatings as first-wall materials : exposure to energetic ions on RHEPP-1.  

SciTech Connect

The level of energy deposition on future inertial fusion energy (IFE) reactor first walls, particularly in direct-drive scenarios, makes the ultimate survivability of such wall materials a challenge. We investigate the survivability of three-dimensional (3-D) dendritic materials fabricated by chemical vapor deposition (CVD), and exposed to repeated intense helium beam pulses on the RHEPP-1 facility at Sandia National Laboratories. Prior exposures of flat materials have led to what appears to be unacceptable mass loss on timescales insufficient for economical reactor operation. Two potential advantages of such dendritic materials are (a) increased effective surface area, resulting in lowered fluences to most of the wall material surface, and (b) improvement in materials properties for such micro-engineered metals compared to bulk processing. Several dendritic fabrications made with either tungsten and tungsten with rhenium show little or no morphology change after up to 800 pulses of 1 MeV helium at reactor-level thermal wall loading. Since the rhenium is added in a thin surface layer, its use does not appear to raise environmental concerns for fusion designs.

Williams, Brian E. (Ultramet, Pacoima, CA); Renk, Timothy Jerome

2010-11-01T23:59:59.000Z

20

Effect of Climates and Building Materials on House Wall Thermal Performance  

Science Journals Connector (OSTI)

The residential housing sectors consume a large amount of fossil fuel energy. Hence the sector is responsible for huge amount of greenhouse gas emission to the atmosphere. Most energy used in the residential housing sector is mainly for space heating and cooling. In order to reduce the energy consumption in the housing sector, energy smart house wall system is required to develop. It is difficult to achieve higher thermal efficiency by using current building wall systems with their construction materials and methods. Although some studies on different aspects of residential housing were reported in the open literature, scant information is available on energy smart house wall systems for the main stream housing. Therefore, the primary objective of this study is to investigate several new house wall systems using various construction materials in order achieve higher thermal efficiency for ongoing heating and cooling. Thermal energy performance modeling was undertaken for two current and four new house wall systems for varied climate conditions across Australia. The findings revealed that at new house wall systems can provide higher energy efficiency and the reduction of greenhouse gas emission for major locations in Australia.

Fayez Aldawi; Firoz Alam; Iftekhar Khan; Mohamed Alghamdi

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Passive Ozone Control Through Use of Reactive Indoor Wall and Ceiling Materials  

E-Print Network (OSTI)

Passive Ozone Control Through Use of Reactive Indoor Wall and Ceiling Materials Paper # 715 Donna A and unpainted drywall as passive ozone control surfaces in a room-sized laboratory chamber. Mean deposition-50%, resulted in increased reactivity for activated carbon. In our model for a typical house, about 35

Siegel, Jeffrey

22

A High Resolution Ultrawideband Wall Penetrating Erman Engin, Berkehan iftiolu, Meri zcan and brahim Tekin  

E-Print Network (OSTI)

for underground mine detection [1], [2], through the wall imaging [3], cancerous tissue detection applications [4 respiratory activity of a human behind a 23 cm thick brick wall. Keywords: UWB Radar, Wall penetrating Radar

Yanikoglu, Berrin

23

Cementitious building material incorporating end-capped polyethylene glycol as a phase change material  

DOE Patents (OSTI)

A cementitious composition comprising a cementitious material and polyethylene glycol or end-capped polyethylene glycol as a phase change material, said polyethylene glycol and said end-capped polyethylene glycol having a molecular weight greater than about 400 and a heat of fusion greater than about 30 cal/g; the compositions are useful in making pre-formed building materials such as concrete blocks, brick, dry wall and the like or in making poured structures such as walls or floor pads; the glycols can be encapsulated to reduce their tendency to retard set.

Salyer, Ival O. (Dayton, OH); Griffen, Charles W. (Mason, OH)

1986-01-01T23:59:59.000Z

24

Quality Characterization of Silicon Bricks using Photoluminescence Imaging and Photoconductive Decay: Preprint  

SciTech Connect

Imaging techniques can be applied to multicrystalline silicon solar cells throughout the production process, which includes as early as when the bricks are cut from the cast ingot. Photoluminescence (PL) imaging of the band-to-band radiative recombination is used to characterize silicon quality and defects regions within the brick. PL images of the brick surfaces are compared to minority-carrier lifetimes measured by resonant-coupled photoconductive decay (RCPCD). Photoluminescence images on silicon bricks can be correlated to lifetime measured by photoconductive decay and could be used for high-resolution characterization of material before wafers are cut. The RCPCD technique has shown the longest lifetimes of any of the lifetime measurement techniques we have applied to the bricks. RCPCD benefits from the low-frequency and long-excitation wavelengths used. In addition, RCPCD is a transient technique that directly monitors the decay rate of photoconductivity and does not rely on models or calculations for lifetime. The measured lifetimes over brick surfaces have shown strong correlations to the PL image intensities; therefore, this correlation could then be used to transform the PL image into a high-resolution lifetime map.

Johnston, S.; Yan, F.; Zaunbrecher, K.; Al-Jassim, M.; Sidelkheir, O.; Ounadjela, K.

2012-06-01T23:59:59.000Z

25

Atomistic modeling of diffusion coefficient in fusion reactor first wall material tungsten  

Science Journals Connector (OSTI)

Abstract Tungsten is remarkable for its robustness, especially it has the highest melting point of all the nonalloyed metals. Metallic material tungsten and tungsten alloys have been widely used in aerospace, weapon, nuclear industries and fusion reactor. Tungsten is expected to be the fusion reactor first wall material for this reason. In this paper, self-diffusion coefficients of metallic material tungsten have been investigated via molecular dynamics simulation method using the modified embedded atom potential model. Diffusion activation energy of tungsten can be gotten according to Arrhenius relation between the self-diffusion coefficients simulation results and temperatures. The dipole interaction model is introduced to analyze metallic material tungsten self-diffusion process in a uniform magnetic field. The strong magnetic field increases diffusion activation energy by 34.52% and limits self-diffusion coefficient by 1.15% in 2T uniform magnetic field.

Zenghui Wang; Kaixuan Zhao; Weiming Chen; Xiaodi Chen; Longyan Zhang

2014-01-01T23:59:59.000Z

26

RavenBrick LLC | Open Energy Information  

Open Energy Info (EERE)

RavenBrick LLC RavenBrick LLC Jump to: navigation, search Logo: RavenBrick LLC Name RavenBrick LLC Address 2201A Lawrence Street Place Denver, Colorado Zip 80205 Sector Buildings Product Efficient window and daylighting systems Website http://www.ravenbrick.com/ Coordinates 39.754373°, -104.9890567° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.754373,"lon":-104.9890567,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

27

David Brick, MD, FAAP, FACC Image credit  

E-Print Network (OSTI)

#12;David Brick, MD, FAAP, FACC #12;Image credit: www.imagewisely.org #12;1) Understand why Adolescent medicine 12-24 years Brain scans show unique features. Adult congenital Brand new natural

28

Impact resistance and energy absorption of regular and functionally graded hexagonal honeycombs with cell wall material strain hardening  

Science Journals Connector (OSTI)

Abstract This paper highlights the effects of cell wall material strain hardening and density functional gradation (FG) on in-plane constant-velocity dynamic crushing response and impact behavior of hexagonal honeycombs. Results show that cell wall material strain hardening influences the distinct deformation modes induced by crushing velocity generally observed in regular hexagonal honeycombs. This is seen by a delay in the onset of localized deformation up until intermediate crushing velocities after which localization becomes dominant smearing out differences brought about by cell wall material strain hardening (plasticity convergence). In addition, during the impact loading on regular honeycombs, it was found that increasing the cell wall material strain hardening decreases the rate of gain of maximum crushing strain with increments in initial kinetic energy of impact. On the other hand, introducing FG brings about new deformation patterns due to changes in material distribution and preferential cell wall collapse of the weaker members. Interestingly, although the dynamic localization effect at higher crushing velocities observed earlier was not found to be particularly affected by FG, gradient convergence (i.e. smearing out the effects of FG due to higher velocities analogous to plasticity convergence) was not observed. On the contrary, gradient convergence emerged at higher impacting velocities primarily brought about by a combination of initial deformation localization and its subsequent advancement into FG region ahead. The kinetic energy threshold for the emergence of this gradient convergence effect was found to be considerably delayed by cell wall material strain hardening.

D. Mousanezhad; R. Ghosh; A. Ajdari; A.M.S. Hamouda; H. Nayeb-Hashemi; A. Vaziri

2014-01-01T23:59:59.000Z

29

The Programmable Brick Handbook Epistemology and Learning Group  

E-Print Network (OSTI)

The Programmable Brick Handbook Epistemology and Learning Group MIT Media Laboratory May 6, 1997 The Programmable Brick is a hand-held, battery-powered computer that can receive inputs from electronic sensors (including touch, light, and sound sensors) and operate LEGO motors. The "Brick" is designed for a variety

30

The Programmable Brick Handbook Epistemology and Learning Group  

E-Print Network (OSTI)

The Programmable Brick Handbook Epistemology and Learning Group MIT Media Laboratory \\Lambda May 6, 1997 The Programmable Brick is a hand­held, battery­powered computer that can receive inputs from electronic sensors (including touch, light, and sound sensors) and operate LEGO motors. The ``Brick

31

Summary of Surface Swipe Sampling for Beryllium on Lead Bricks and Shielding  

SciTech Connect

Approximately 25,000 lbs of lead bricks at Site 300 were assessed by the Site 300 Industrial Hygienis tand Health Physicist for potential contamination of beryllium and radiation for reuse. These lead bricks and shielding had been used as shielding material during explosives tests that included beryllium and depleted uranium. Based on surface swipe sampling that was performed between July 26 and October 11, 2010, specifically for beryllium, the use of a spray encapsulant was found to be an effective means to limit removable surface contamination to levels below the DOE release limit for beryllium, which is 0.2 mcg/100 cm{sup 2}. All the surface swipe sampling data for beryllium and a timeline of when the samples were collected (and a brief description) are presented in this report. On December 15, 2010, the lead bricks and shielding were surveyed with an ion chamber and indicated dose rates less than 0.05 mrem per hour on contact. This represents a dose rate consistent with natural background. An additional suevey was performed on February 8, 2011, using a GM survey instrument to estimate total activity on the lead bricks and shielding, confirming safe levels of radioactivity. The vendor is licensed to possess and work with radioactive material.

Paik, S Y; Barron, D A

2011-08-03T23:59:59.000Z

32

Material Characterization and Design Recommendations for Mechanically Stabilized Earth Retaining Walls  

E-Print Network (OSTI)

. ................................... 120 Figure 94. Ka FLAC Comparison with Ka_Rankine for Different ? (Retain) for 10 ft Wall Height with No Dilation Angle. .................................................... 121 xiv Figure 95. Ka_FLAC Comparison with Ka_Rankine for Different... ? (Retain) for 10 ft Wall Height with Dilation Angle. .......................................................... 122 Figure 96. Ka_FLAC Comparison with Ka_Rankine for Different ? (Retain) for 20 ft Wall Height with No Dilation Angle...

Dantal, Vishal

2013-12-04T23:59:59.000Z

33

E-Print Network 3.0 - accelerator wall materials Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

interactions Neutron damage to first wall and optics Channel formation 12;The types of research ... Source: UK Fusion Center at Culham (UKAEA) Collection: Plasma...

34

Properties of Roman bricks and mortars used in Serapis temple in the city of Pergamon  

SciTech Connect

Serapis temple, which was constructed in the Roman period in the city of Pergamon (Bergama/Turkey), is one of the most important monuments of the world heritage. In this study, the characteristics of bricks and mortars used in the temple have been determined in order to define the necessary characteristics of the intervention materials, which will be used in the conservation works of the temple. Several analyses were carried out to determine their basic physical properties, raw material compositions, mineralogical and microstructural properties using X-ray diffraction, Scanning Electron Microscope and a Thermo Gravimetric Analyzer. Analysis results indicated that the mortars are stiff, compact and hydraulic due to the use of natural pozzolanic aggregates. The Roman bricks are of low density, high porosity and were produced from raw materials containing calcium poor clays fired at low temperatures.

Ozkaya, Ozlem Aslan [Architectural Restoration Department, Izmir Institute of Technology, 35430 Izmir (Turkey); Boeke, Hasan, E-mail: hasanboke@iyte.edu.tr [Architectural Restoration Department, Izmir Institute of Technology, 35430 Izmir (Turkey)

2009-09-15T23:59:59.000Z

35

A Comprehensive Study of Phase Change Materials (PCMs) for Building Walls Applications  

E-Print Network (OSTI)

from the wallboard would produce large peak reductions for most climate zones. For the cities located in places with hot climates, such as Phoenix, AZ, the PCM layer would need to be moved towards the colder side of the wall. For all the climate... the distribution of daily maximum and corresponding minimum temperatures for the exterior surface of the west wall ....... 25 Figure 2.9 Outdoor air temperatures........................................................................... 26 Figure 2.10 Exterior...

Fang, Yuan

2009-03-09T23:59:59.000Z

36

December 6, 2000 A. R. Raffray, et al., Assessment of Dry Wall Material Configuration  

E-Print Network (OSTI)

-coolers · Turbine efficiency = 0.93 · Compressor efficiency = 0.88 · Recuperator effect. = 0.96 · Cycle He Efficiency of Running a Low Temperature Chamber Wall and a High Temperature Blanket Intercooler 1 Intercooler 2 Compressor 1 Compressor 2 Compressor 3 Heat Rejection HX Wnet Turbine Recuperator Blanket

Raffray, A. René

37

Materials Science and Engineering -Master Thesis -July 2011 Analysis and optimization of thin walled  

E-Print Network (OSTI)

. Materials and processes Work done Compounding realized either using pre-preg technology or Resin Infusion

Dalang, Robert C.

38

On the structure and properties of a material deposited from arc discharge plasma near the cathode and onto vacuum-chamber walls  

Science Journals Connector (OSTI)

The structure and composition of a material (composite) deposited onto vacuum-chamber walls from arc discharge plasma during the crystallization of cathode spot products in electric and magnetic fields is studied...

N. A. Smolanov; N. A. Pankin

2014-09-01T23:59:59.000Z

39

BBF RFC 21: BglBricks Assembly Standard  

E-Print Network (OSTI)

The BglBricks standard has been developed as an alternative to the original XbaI/SpeI standard primarily to provide a solution to the issue of generating translational-fusion parts. When joined together in a standard ...

Anderson, J Christopher

2009-09-18T23:59:59.000Z

40

The promise of digital technology in brick and mortar retail  

E-Print Network (OSTI)

In this thesis we discuss the profound impact that technology is having on brick-and-mortar fashion retail. Retailers that (i) understand the implications of these changes and (ii) can adapt their retail business models ...

Chan, Jos Pablo

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Session 3353 LEGO Brick Sculptures and Robotics in Education  

E-Print Network (OSTI)

-on creativity for students, we have started to incorporate LEGO bricks in engineering education from kindergarten to graduate school. The versatility and natural appeal of these toys have led to engineering a few engineering masters theses. Students at all levels have become excited about engineering and have

42

Porous wall hollow glass microspheres as a medium or substrate for storage and formation of novel materials  

DOE Patents (OSTI)

Porous wall hollow glass microspheres are provided as a template for formation of nanostructures such as carbon nanotubes, In addition, the carbon nanotubes in combination with the porous wall hollow glass microsphere provides an additional reaction template with respect to carbon nanotubes.

Wicks, George G; Serkiz, Steven M.; Zidan, Ragaiy; Heung, Leung K.

2014-06-24T23:59:59.000Z

43

Lifetime Analysis of First wall Materials Exposed to High Temperature and High Energy Neutrons in a Fusion Reactor  

Science Journals Connector (OSTI)

At first wall of a fusion power reactor will be subjected to neutrons, charged particles and radiation, leading to neutron irradiation damage, decrease of thickness by physical sputtering, and high heat flux, ...

K. Miya; H. Hashizume; H. Oomura; M. Akiyama

1987-01-01T23:59:59.000Z

44

Heat Transfer Reduction Across the Walls of Refrigerated Van Trailers by the Application of Phase Change Material  

E-Print Network (OSTI)

. The technology was tested in similar days in terms of temperature and solar insolation. The relevant variables that were monitored were the heat flux across the walls of the simulators and temperatures, including surface and indoor air temperatures. Other...

Ahmed, Mashud

2009-03-13T23:59:59.000Z

45

Liquid Wall Chambers  

SciTech Connect

The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

Meier, W R

2011-02-24T23:59:59.000Z

46

We invite you to help us build the engineering "pathway to the future" by laying a personalized brick  

E-Print Network (OSTI)

of Engineering Building II, where it will become a permanent part of our history. By contributing to our brickWe invite you to help us build the engineering "pathway to the future" by laying a personalized brick in honor of your graduate for the Engineering Building II (EB II) walkway. Each brick will hold

47

Design and Construction of a Guarded Hot Box Facility for Evaluating the Thermal Performance of Building Wall Materials  

E-Print Network (OSTI)

, studs in walls are also thermal bridges, since the thermal resistance of wood is much less than the insulation surrounding them. [5] In order to block thermal bridging, either exterior insulation or Aerogel stud strips can be used. [4]. Most exterior... components. [6] 3 3 Aerogel is a silica based nano-scale structure originally developed by NASA and used on the Mars Rover that is 98% air [7], [8]. Until recently aerogel has been far too expensive to even consider using in homes, however...

Mero, Claire Renee

2012-07-16T23:59:59.000Z

48

Fluidized wall for protecting fusion chamber walls  

DOE Patents (OSTI)

Apparatus for protecting the inner wall of a fusion chamber from microexplosion debris, x-rays, neutrons, etc. produced by deuterium-tritium (DT) targets imploded within the fusion chamber. The apparatus utilizes a fluidized wall similar to a waterfall comprising liquid lithium or solid pellets of lithium-ceramic, the waterfall forming a blanket to prevent damage of the structural materials of the chamber.

Maniscalco, James A. (Danville, CA); Meier, Wayne R. (Livermore, CA)

1982-01-01T23:59:59.000Z

49

Breaking down brick walls: Design, construction, and prototype fabrication knowledge in architecture  

E-Print Network (OSTI)

Architectural designs are not just collections of 3D objects. Architects have both high-level aesthetic design intent, and intent for the functionality of the building; these must eventually translate into real-world ...

Villalon, Rachelle

50

Verification and Validation of EnergyPlus Conduction Finite Difference and Phase Change Material Models for Opaque Wall Assemblies  

SciTech Connect

Phase change materials (PCMs) represent a potential technology to reduce peak loads and HVAC energy consumption in buildings. There are few building energy simulation programs that have the capability to simulate PCM but their accuracy has not been completely tested. This report summarizes NREL efforts to develop diagnostic tests cases to obtain accurate energy simulations when PCMs are modeled in residential buildings.

Tabares-Velasco, P. C.; Christensen, C.; Bianchi, M.; Booten, C.

2012-07-01T23:59:59.000Z

51

Synthesis of CFB-Coal Fly Ash Clay Bricks and Their Characterisation  

Science Journals Connector (OSTI)

The aim of this work was to test CFB-derived fly ash for its potential to ... . Results showed that large-scale production of CFB FA-containing bricks is feasible, as their...

Nikolaos Koukouzas; Chrisovalantis Ketikidis

2011-02-01T23:59:59.000Z

52

Assembly of BioBrick standard biological parts using three antibiotic assembly  

E-Print Network (OSTI)

An underlying goal of synthetic biology is to make the process of engineering biological systems easier and more reliable. In support of this goal, we developed BioBrick assembly standard 10 to enable the construction of ...

Shetty, Reshma

2011-05-20T23:59:59.000Z

53

Coal fly ashcarbide lime bricks: An environment friendly building product  

Science Journals Connector (OSTI)

Abstract Coal fly ash and carbide lime are industrial by-products of coal combustion in thermal power plants and of manufacture of acetylene gas, respectively, available in profusion in southern Brazil. Research has been carried out to search for possible use of such materials to produce environmental friendly bricks that have high compressive strength. This study aims to evaluate strength controlling parameters of coal fly ashcarbide lime mixtures, as well as to show that porosity/carbide lime (?/Lv) ratio (corresponding to porosity divided by the volumetric carbide lime content) can be used to predict compressive strength (qu). The controlling parameters evaluated here are carbide lime content, porosity, curing temperature, curing time and porosity/carbide lime ratio. A number of unconfined compression tests were carried out. The results show that a power function adapts better the relation qu versus ?/Lv, in which Lv is adjusted by an exponent (in this case 0.11) for all coal fly ashcarbide lime mixtures studied. Equations that control the compressive strength for each curing period and curing temperature examined can be formulated using this unique ratio. Preferred strategies for varying ranges of qu are also proposed based on the energy required for heating, considering distinct curing periods and temperatures.

Nilo Cesar Consoli; Ceclia Gravina da Rocha; Rodrigo Beck Saldanha

2014-01-01T23:59:59.000Z

54

A study of the feasibility of the increased use of wage incentives in the brick manufacturing industry  

E-Print Network (OSTI)

are moved by conveyor belt to workers who stack them on the decks of kiln cars. The units are stacked in large cubes called "hacks. " There are approx- imately from 500 to 850 brick in a hack depending on the style and size of the bricks. (See Figure 2... in the process. At the present time, the unfired units are placed by hand on the kiln car deck. A group of men stand before the conveyor belt carrying the green brick. (See Figures 4 and 5. ) As these brick come within reach of a work- er, he removes thea...

Stringer, James Lewis

2012-06-07T23:59:59.000Z

55

Low-Btu coal gasification in the United States: company topical. [Brick producers  

SciTech Connect

Hazelton and other brick producers have proved the reliability of the commercial size Wellman-Galusha gasifier. For this energy intensive business, gas cost is the major portion of the product cost. Costs required Webster/Hazelton to go back to the old, reliable alternative energy of low Btu gasification when the natural gas supply started to be curtailed and prices escalated. Although anthracite coal prices have skyrocketed from $34/ton (1979) to over $71.50/ton (1981) because of high demand (local as well as export) and rising labor costs, the delivered natural gas cost, which reached $3.90 to 4.20/million Btu in the Hazelton area during 1981, has allowed the producer gas from the gasifier at Webster Brick to remain competitive. The low Btu gas cost (at the escalated coal price) is estimated to be $4/million Btu. In addition to producing gas that is cost competitive with natural gas at the Webster Brick Hazelton plant, Webster has the security of knowing that its gas supply will be constant. Improvements in brick business and projected deregulation of the natural gas price may yield additional, attractive cost benefits to Webster Brick through the use of low Btu gas from these gasifiers. Also, use of hot raw gas (that requires no tar or sulfur removal) keeps the overall process efficiency high. 25 references, 47 figures, 14 tables.

Boesch, L.P.; Hylton, B.G.; Bhatt, C.S.

1983-07-01T23:59:59.000Z

56

Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

2 MAG LAB REPORTS Volume 18 No. 1 CONDENSED MATTER SCIENCE Technique development, graphene, magnetism & magnetic materials, topological insulators, quantum fl uids & solids,...

57

A RESTful API for Supporting Automated BioBrick Model Assembly  

E-Print Network (OSTI)

Constructing simulatable models for BioBricks by hand is a complex and time-consuming task. The time taken could be reduced by using Computer Aided Design (CAD) tools to aid in designing models, but these tools need to be ...

Steyn, J S

2010-12-05T23:59:59.000Z

58

Multiple moving wall dry coal extrusion pump  

DOE Patents (OSTI)

A pump for transporting particulate material includes a passageway defined on each side between an inlet and an outlet by a moving wall.

Fitzsimmons, Mark Andrew

2013-05-14T23:59:59.000Z

59

Journal of Magnetism and Magnetic Materials 272276 (2004) e1347e1348 Domain wall drag due to dc current injection into  

E-Print Network (OSTI)

, was fabricated by a conventional lift-off technique. In this system, a domain wall is generally nucleated [3]. The resistivity measurements were performed at 3 K using a four- terminal DC measurement system current at the bias field of 160 Oe: Here In and Vn are the current and the voltage at nth measured point

Otani, Yoshichika

60

Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Materials and methods are available as supplementary materials on Science Online. 16. W. Benz, A. G. W. Cameron, H. J. Melosh, Icarus 81, 113 (1989). 17. S. L. Thompson, H. S. Lauson, Technical Rep. SC-RR-710714, Sandia Nat. Labs (1972). 18. H. J. Melosh, Meteorit. Planet. Sci. 42, 2079 (2007). 19. S. Ida, R. M. Canup, G. R. Stewart, Nature 389, 353 (1997). 20. E. Kokubo, J. Makino, S. Ida, Icarus 148, 419 (2000). 21. M. M. M. Meier, A. Reufer, W. Benz, R. Wieler, Annual Meeting of the Meteoritical Society LXXIV, abstr. 5039 (2011). 22. C. B. Agnor, R. M. Canup, H. F. Levison, Icarus 142, 219 (1999). 23. D. P. O'Brien, A. Morbidelli, H. F. Levison, Icarus 184, 39 (2006). 24. R. M. Canup, Science 307, 546 (2005). 25. J. J. Salmon, R. M. Canup, Lunar Planet. Sci. XLIII, 2540 (2012). Acknowledgments: SPH simulation data are contained in tables S2 to S5 of the supplementary materials. Financial support

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

First wall for polarized fusion reactors  

DOE Patents (OSTI)

A first-wall or first-wall coating for use in a fusion reactor having polarized fuel may be formed of a low-Z non-metallic material having slow spin relaxation, i.e., a depolarization rate greater than 1 sec/sup -1/. Materials having these properties include hydrogenated and deuterated amorphous semiconductors. A method for preventing the rapid depolarization of a polarized plasma in a fusion device may comprise the step of providing a first-wall or first-wall coating formed of a low-Z, non-metallic material having a depolarization rate greater than 1 sec/sup -1/.

Greenside, H.S.; Budny, R.V.; Post, D.E. Jr.

1985-01-29T23:59:59.000Z

62

Concentrations of Naturally Occuring Radionuclides and Fission Products in Brick Samples Fabricated and Used in and Around Greater Dhaka City  

Science Journals Connector (OSTI)

...Radiation Protection Dosimetry Article Concentrations of Naturally Occuring Radionuclides and Fission Products in Brick Samples...measures to minimise the harmful effects of ionising radiation. The radium equivalent activity concentrations......

S. Roy; M.S. Alam; F.K. Miah; B. Alam

2000-04-01T23:59:59.000Z

63

Non Invasive Measurements of Moisture in Full-Scale Stone and Brick Masonry Models After Simulated Flooding: Effectiveness of GPR  

Science Journals Connector (OSTI)

Within the framework of a European Commission project entitled Cultural HEritage against Flood (CHEF), a research was carried out in Milan on full-scale stone and brick masonry models by means of a simulated f...

G. Cardani; L. Cantini; S. Munda; L. Zanzi

2013-01-01T23:59:59.000Z

64

Gas storage materials, including hydrogen storage materials  

DOE Patents (OSTI)

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2014-11-25T23:59:59.000Z

65

A Comparative Heat Transfer Examination of Structural Insulated Panels (SIPs) With and Without Phase Change Materials (PCMs) Using a Dynamic Wall Simulator  

E-Print Network (OSTI)

The main focus of this paper was to present data to advance the design of a previously developed thermally-enhanced structural insulated panel (SIP) that had been outfitted with phase change materials (PCMs) (Medina et al., 2008). To advance...

Medina, M.; Zhu, D.

66

Wall to Wall Optimal Transport  

E-Print Network (OSTI)

The calculus of variations is employed to find steady divergence-free velocity fields that maximize transport of a tracer between two parallel walls held at fixed concentration for one of two constraints on flow strength: a fixed value of the kinetic energy or a fixed value of the enstrophy. The optimizing flows consist of an array of (convection) cells of a particular aspect ratio Gamma. We solve the nonlinear Euler-Lagrange equations analytically for weak flows and numerically (and via matched asymptotic analysis in the fixed energy case) for strong flows. We report the results in terms of the Nusselt number Nu, a dimensionless measure of the tracer transport, as a function of the Peclet number Pe, a dimensionless measure of the energy or enstrophy of the flow. For both constraints the maximum transport Nu_{MAX}(Pe) is realized in cells of decreasing aspect ratio Gamma_{opt}(Pe) as Pe increases. For the fixed energy problem, Nu_{MAX} \\sim Pe and Gamma_{opt} \\sim Pe^{-1/2}, while for the fixed enstrophy scenario, Nu_{MAX} \\sim Pe^{10/17} and Gamma_{opt} \\sim Pe^{-0.36}. We also interpret our results in the context of certain buoyancy-driven Rayleigh-Benard convection problems that satisfy one of the two intensity constraints, enabling us to investigate how the transport scalings compare with upper bounds on Nu expressed as a function of the Rayleigh number \\Ra. For steady convection in porous media, corresponding to the fixed energy problem, we find Nu_{MAX} \\sim \\Ra and Gamma_{opt} \\sim Ra^{-1/2}$, while for steady convection in a pure fluid layer between free-slip isothermal walls, corresponding to fixed enstrophy transport, Nu_{MAX} \\sim Ra^{5/12} and Gamma_{opt} \\sim Ra^{-1/4}.

Pedram Hassanzadeh; Gregory P. Chini; Charles R. Doering

2014-04-14T23:59:59.000Z

67

First wall for polarized fusion reactors  

DOE Patents (OSTI)

Depolarization mechanisms arising from the recycling of the polarized fuel at the limiter and the first-wall of a fusion reactor are greater than those mechanisms in the plasma. Rapid depolarization of the plasma is prevented by providing a first-wall or first-wall coating formed of a low-Z, non-metallic material having a depolarization rate greater than 1 sec.sup.-1.

Greenside, Henry S. (Cranbury, NJ); Budny, Robert V. (Princeton, NJ); Post, Jr., Douglass E. (Buttonwood, CT)

1988-01-01T23:59:59.000Z

68

We are going to use a plank of wood, a brick, sandpaper, and an elastic cord to mimic earthquake mechanics. Although pulled with a constant velocity, the brick will repeatedly slide and then  

E-Print Network (OSTI)

earthquake mechanics. Although pulled with a constant velocity, the brick will repeatedly slide and then stop. This intermittent sliding motion mimics the intermittent fault slippage that characterizes the earthquake fault to mountain building, for example, or when one plate must slide past another, earthquakes are produced

Smith-Konter, Bridget

69

Fracture of welded aluminum thin-walled structures  

E-Print Network (OSTI)

A comprehensive methodology was developed in the thesis for damage prediction of welded aluminum thin-walled structures, which includes material modeling, calibration, numerical simulation and experimental verification. ...

Zheng, Li, Ph. D. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

70

Effects of preheating and highly heat-conductive brick on coke quality  

SciTech Connect

In replacing the coke ovens available currently, the introduction of a combined technique of a preheated coal charging method (preheating temperature:175 C) and the use of highly heat-conductive brick is under examination for raising the productivity of coke ovens. With such background, a study of the effects of this combined technique on the coke quality, especially the coke size was conducted. The experimental results revealed that the primary size of coke produced by the combined technique is noticeably larger than that of the coke made from wet coal and after five revolutions of drum (equivalent to mechanical impact given at a time of dropping from coke oven chamber to wharf), the coke size reduces even compared with an ordinary coke. This may be due to the fact that the coke produced by the combined technique includes a lot of fissures inside the coke lump.

Fukuda, K.; Arima, T. [Nippon Steel Corp., Chiba (Japan). Process Technology, Research Labs.

1995-12-31T23:59:59.000Z

71

Absorbed Gamma?Ray Doses due to Natural Radionuclides in Building Materials  

Science Journals Connector (OSTI)

This work is devoted to the application of high?resolution gamma?ray spectrometry in the study of the effective dose coming from naturally occurring radionuclides namely 40 K 232 Th and 238 U present in building materials such as sand cement and granitic gravel. Four models were applied to estimate the effective dose and the hazard indices. The maximum estimated effective dose coming from the three reference rooms considered is 0.90(45) mSv/yr and maximum internal hazard index is 0.77(24) both for the compact clay brick reference room. The principal gamma radiation sources are cement sand and bricks.

Vitor A. P. Aguiar; Nilberto H. Medina; Ramon H. Moreira; Marcilei A. G. Silveira

2010-01-01T23:59:59.000Z

72

Absorbed Gamma-Ray Doses due to Natural Radionuclides in Building Materials  

SciTech Connect

This work is devoted to the application of high-resolution gamma-ray spectrometry in the study of the effective dose coming from naturally occurring radionuclides, namely {sup 40}K, {sup 232}Th and {sup 238}U, present in building materials such as sand, cement, and granitic gravel. Four models were applied to estimate the effective dose and the hazard indices. The maximum estimated effective dose coming from the three reference rooms considered is 0.90(45) mSv/yr, and maximum internal hazard index is 0.77(24), both for the compact clay brick reference room. The principal gamma radiation sources are cement, sand and bricks.

Aguiar, Vitor A. P.; Medina, Nilberto H. [Instituto de Fisica, Universidade de Sao Paulo, SP (Brazil); Moreira, Ramon H.; Silveira, Marcilei A. G. [Departamento de Fisica, Centro Universitario da FEI, Sao Bernardo do Campo, SP (Brazil)

2010-05-21T23:59:59.000Z

73

Wall System Innovations: Familiar Materials, Better Performance  

Energy.gov (U.S. Department of Energy (DOE))

This presentation was delivered at the U.S. Department of Energy Building America Technical Update meeting on April 29-30, 2013, in Denver, Colorado.

74

Wall System Innovations: Familiar Materials, Better Performance...  

Energy Savers (EERE)

More Documents & Publications Key Issues Building America Team (NAHBRC) - 2014 BTO Peer Review DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes, Double...

75

Hot wire production of single-wall and multi-wall carbon nanotubes  

DOE Patents (OSTI)

Apparatus (210) for producing a multi-wall carbon nanotube (213) may comprise a process chamber (216), a furnace (217) operatively associated with the process chamber (216), and at least one filament (218) positioned within the process chamber (216). At least one power supply (220) operatively associated with the at least one filament (218) heats the at least one filament (218) to a process temperature. A gaseous carbon precursor material (214) operatively associated with the process chamber (216) provides carbon for forming the multi-wall carbon nanotube (213). A metal catalyst material (224) operatively associated with the process (216) catalyzes the formation of the multi-wall carbon nanotube (213).

Dillon, Anne C. (Boulder, CO); Mahan, Archie H. (Golden, CO); Alleman, Jeffrey L. (Lakewood, CO)

2010-10-26T23:59:59.000Z

76

INTOR impurity control and first wall system  

SciTech Connect

The highlights of the recent INTOR effort on examining the key issues of the impurity control/first wall system are summarized. The emphasis of the work was an integrated study of the edge-region physics, plasma-wall interaction, materials, engineering and magnetic considerations associated with the poloidal divertor and pump limiter. The development of limiter and divertor collector plate designs with an acceptable lifetime was a major part of the work.

Abdou, M.A.

1983-04-01T23:59:59.000Z

77

Case histories of building material problems caused by condensation at an enclosed swimming pool and an enclosed ice rink  

SciTech Connect

Enclosed swimming pools and ice rinks in winter climates have the potential for high indoor relative humidities and cold building materials. These elements can contribute to condensation and premature deterioration of building materials. Case histories are provided for an enclosed swimming pool and an enclosed ice rink with condensation problems. An evaluation was performed after roof leaks were reported at a recently constructed indoor swimming pool in a Chicago suburb. After a preliminary inspection, it was evident that the reported leaks were related to building moisture problems rather than a roof leak. Exterior brick masonry exhibited heavy efflorescence in the area of the swimming pools, and water streaks were visible on the exterior walls below the eaves. The evaluation included laboratory testing, a visual inspection, field tests and measurements, and analyses for condensation potential. Results of the evaluation indicated the presence of condensed moisture as a direct cause of the observed water stains, and masonry efflorescence. Recommended corrective actions developed. A 54-year-old enclosed ice rink in New England was under investigation to determine the cause of a deteriorated wood deck roof. The building did not have dehumidification or air handling systems, and was heated only when occupied. The evaluation included visual inspection and analyses for condensation potential. Results of the evaluation indicated condensation within the wood decking and insulation during winter months, and high relative humidities that prohibited drying during the spring, summer, and fall. These conditions, over an extended number of years, resulted in decay of the wood decking.

VanGeem, M.G.; Farahmandpour, K.; Gajda, J.

1999-07-01T23:59:59.000Z

78

Domain walls riding the wave.  

SciTech Connect

Recent years have witnessed a rapid proliferation of electronic gadgets around the world. These devices are used for both communication and entertainment, and it is a fact that they account for a growing portion of household energy consumption and overall world consumption of electricity. Increasing the energy efficiency of these devices could have a far greater and immediate impact than a gradual switch to renewable energy sources. The advances in the area of spintronics are therefore very important, as gadgets are mostly comprised of memory and logic elements. Recent developments in controlled manipulation of magnetic domains in ferromagnet nanostructures have opened opportunities for novel device architectures. This new class of memories and logic gates could soon power millions of consumer electronic devices. The attractiveness of using domain-wall motion in electronics is due to its inherent reliability (no mechanical moving parts), scalability (3D scalable architectures such as in racetrack memory), and nonvolatility (retains information in the absence of power). The remaining obstacles in widespread use of 'racetrack-type' elements are the speed and the energy dissipation during the manipulation of domain walls. In their recent contribution to Physical Review Letters, Oleg Tretiakov, Yang Liu, and Artem Abanov from Texas A&M University in College Station, provide a theoretical description of domain-wall motion in nanoscale ferromagnets due to the spin-polarized currents. They find exact conditions for time-dependent resonant domain-wall movement, which could speed up the motion of domain walls while minimizing Ohmic losses. Movement of domain walls in ferromagnetic nanowires can be achieved by application of external magnetic fields or by passing a spin-polarized current through the nanowire itself. On the other hand, the readout of the domain state is done by measuring the resistance of the wire. Therefore, passing current through the ferromagnetic wire is the preferred method, as it combines manipulation and readout of the domain-wall state. The electrons that take part in the process of readout and manipulation of the domain-wall structure in the nanowire do so through the so-called spin transfer torque: When spin-polarized electrons in the ferromagnet nanowire pass through the domain wall they experience a nonuniform magnetization, and they try to align their spins with the local magnetic moments. The force that the electrons experience has a reaction force counterpart that 'pushes' the local magnetic moments, resulting in movement of the domain wall in the direction of the electron flow through the spin-transfer torque. The forces between the electrons and the local magnetic moments in the ferromagnet also create additional electrical resistance for the electrons passing through the domain wall. By measuring resistance across a segment of the nanowire, one determines if a domain wall is present; i.e., one can read the stored information. The interaction of the spin-polarized electrons with the domain wall in the ferromagnetic nanowire is not very efficient. Even for materials achieving high polarization of the free electrons, it is very difficult to move the magnetic domain wall. Several factors contribute to this problem, with imperfections of the ferromagnetic nanowire that cause domain-wall pinning being the dominant one. Permalloy nanowires, one of the best candidates for domain-wall-based memory and logic devices, require current densities of the order of 10{sup 8} A/cm{sup 2} in order to move a domain wall from a pinning well. Considering that this current has to pass through a relatively long wire, it is not very difficult to imagine that most of the energy will go to Joule heating. The efficiency of the process - the ratio of the energy converted to domain-wall motion to the total energy consumed - is comparable to that of an incandescent light bulb converting electricity to light. A step towards more efficient domain-wall-based memory devices is the advance of using alternating currents or curren

Karapetrov, G.; Novosad, V.; Materials Science Division

2010-11-01T23:59:59.000Z

79

Tokamak reactor first wall  

DOE Patents (OSTI)

This invention relates to an improved first wall construction for a tokamak fusion reactor vessel, or other vessels subjected to similar pressure and thermal stresses.

Creedon, R.L.; Levine, H.E.; Wong, C.; Battaglia, J.

1984-11-20T23:59:59.000Z

80

Numerical evidence for nucleated self-assembly of DNA brick structures  

E-Print Network (OSTI)

The observation by Ke et al. [Science 338, 1177 (2012)] that large numbers of short, pre-designed DNA strands can assemble into three-dimensional target structures came as a great surprise, as no colloidal self-assembling system has ever achieved the same degree of complexity. That failure seemed easy to rationalise: the larger the number of distinct building blocks, the higher the expected error rate for self-assembly. The experiments of Ke et al. have disproved this argument. Here, we report Monte Carlo simulations of the self-assembly of a DNA brick cube, comprising approximately 1000 types of DNA strand, using a simple model. We model the DNA strands as lattice tetrahedra with attractive patches, the interaction strengths of which are computed using a standard thermodynamic model. We find that, within a narrow temperature window, the target structure assembles with high probability. Our simulations suggest that mis-assembly is disfavoured because of a slow nucleation step. As our model incorporates no aspect of DNA other than its binding properties, these simulations suggest that, with proper design of the building blocks, other systems, such as colloids, may also assemble into truly complex structures.

Aleks Reinhardt; Daan Frenkel

2014-04-25T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Great Wall Starbucks  

E-Print Network (OSTI)

along the Great Wall. When you think about it, it's not a bad marketing strategy: the Wall is high, the stairs relentless; what better than an espresso to energize you for the steep climb up? On second thought, make that a double. #ceas #china #tsutsui...

Hacker, Randi; Gatewood, Tyler; Tsutsui, William

2006-03-29T23:59:59.000Z

82

Hollow porous-wall glass microspheres for hydrogen storage  

DOE Patents (OSTI)

A porous wall hollow glass microsphere is provided having a diameter range of between 1 to 200 microns, a density of between 1.0 to 2.0 gm/cc, a porous-wall structure having wall openings defining an average pore size of between 10 to 1000 angstroms, and which contains therein a hydrogen storage material. The porous-wall structure facilitates the introduction of a hydrogen storage material into the interior of the porous wall hollow glass microsphere. In this manner, the resulting hollow glass microsphere can provide a membrane for the selective transport of hydrogen through the porous walls of the microsphere, the small pore size preventing gaseous or liquid contaminants from entering the interior of the hollow glass microsphere.

Heung, Leung K. (Aiken, SC); Schumacher, Ray F. (Aiken, SC); Wicks, George G. (Aiken, SC)

2010-02-23T23:59:59.000Z

83

Synthesis and Electronic Transport in Known Chirality Single Wall Carbon Nanotubes  

E-Print Network (OSTI)

Synthesis and Electronic Transport in Known Chirality Single Wall Carbon Nanotubes Bhupesh Chandra;ABSTRACT Synthesis and Electronic Transport in Known Chirality Single Wall Carbon Nanotubes Bhupesh Chandra Carbon nanotubes are intriguing new materials with extraordinary electrical properties originating from

Hone, James

84

Phenomenological theory of a single domain wall in uniaxial trigonal ferroelectrics: Lithium niobate and lithium tantalate  

E-Print Network (OSTI)

Phenomenological theory of a single domain wall in uniaxial trigonal ferroelectrics: Lithium niobate and lithium tantalate David A. Scrymgeour and Venkatraman Gopalan Department of Materials Science, lithium niobate and lithium tantalate. The contributions to the domain- wall energy from polarization

Gopalan, Venkatraman

85

Phase-Change Frame Walls (PCFWs) for Peak Demand Reduction, Load Shifting, Energy Conservation and Comfort  

E-Print Network (OSTI)

) for lowering peak heat transfer rates across walls of residential and small commercial buildings. A PCFW is a typical wall in which phase change materials (PCMs) have been incorporated via macroencapsulation to enhance the energy storage capabilities...

Medina, M.; Stewart, R.

86

Effects of alternate fuels report No. 8: analysis of degradiation of magnesia-based refractory bricks from a residual oil-fired rotary cement kiln  

SciTech Connect

Residual oil was used as an alternate fuel to natural gas to supply heat in a rotary cement kiln. Principal impurities in the residual oil were Ca, Fe, Mg, Na, Ni, P.S. and V. the kiln operators were concerned about the effects of these oil impurities on observed degradation of the magnesia-based bricks used as a liner in the burning zone of the kiln. Two degraded bricks, which had been in service for six to nine months, were analyzed to determine the role of fuel impurities on the observed degradation. The maximum hot-face temperature of the refractory during service was about 1500/sup 0/C. One brick had decreased in thickness about 45%, the about 15%. Various analytical measurements on these samples failed to reveal the presence of fuel impurities at or near the hot face of the bricks, and therefore it is concluded that the relatively short service life of these refractories was not due to use of residual oil as the fuel in the kiln. The observed degradation, therefore, was attributed to other reactions and to thermal mechanical conditions in the kiln, which inevitably resulted in extensive erosion of the bricks.

Federer, J.I.; Tennery, V.J.

1980-05-01T23:59:59.000Z

87

Phase-Change Frame Walls (PCFWs) for On-Peak Demand Reduction and Energy Conservation in Residential Buildings: Development, Construction and Evaluation  

E-Print Network (OSTI)

macroencapsulated phase-change materials (PCMs), incorporated therein, was developed, constructed, and evaluated. This prototype wall is referred to as - phase-change frame wall (PCFW). A PCFW is a typical frame wall, consisting of outside siding, thermal insulation...

Zhang, M.; Medina, M. A.; King, J. B.

2004-01-01T23:59:59.000Z

88

Unitised Curtain Walls  

Science Journals Connector (OSTI)

Unitised curtain walling was developed to overcome the problems associated with the installation of stick systems (see Chapter 7) and to reduce the on-site installation time. It consists of large panels, usual...

2009-01-01T23:59:59.000Z

89

Large Scale Triaxial Testing of Mechanically Stabilized Earth Retaining Wall Backfill  

E-Print Network (OSTI)

for regionally available backfill materials. Prior to numerical modeling simulations, material parameters of regionally available backfill needed to be evaluated. As the state guidelines require 85-percent of the wall backfill material to be above the No. 4...

Garton, Mackenzie

2013-01-11T23:59:59.000Z

90

Selection of materials for high temperature sensible energy storage  

Science Journals Connector (OSTI)

Abstract Availability of thermal energy storage systems (TES) is a key to ensuring continuous power supply from solar thermal power plants. The application of sensible heat storage (SHS) in solid media is an attractive economic option, but is dependent on identifying suitable SHS media. Given the growing number of new materials available today, finding a suitable material is a time-consuming and difficult process. This paper demonstrates the use of a materials selection software package and identifies suitable SHS materials for high temperature (>500C) TES systems. The environmental performance of some selected materials was also evaluated using the package. Common materials such as alumina, silicon carbide, high temperature concrete, graphite, cast iron and steel were found to be highly suitable for SHS for the duty considered (500750C). For cost comparison, a simple heat exchanger, consisting of a packed bed of the materials (in brick or block form) heated by an inert gas, was considered. On the basis of equivalent gas phase heat transfer, high alumina cement concrete blocks had the lowest cost, followed by a common refractory brick at High temperature concretes, such as the high alumina cement-based materials and aluminasilicate geoploymers, were identified as having potential for SHS media as they are cheap composite materials. Their thermophysical properties could be optimised for SHS by a suitable choice of aggregates, binders and additives.

S. Khare; M. Dell'Amico; C. Knight; S. McGarry

2013-01-01T23:59:59.000Z

91

Methods for degrading or converting plant cell wall polysaccharides  

DOE Patents (OSTI)

The present invention relates to methods for converting plant cell wall polysaccharides into one or more products, comprising: treating the plant cell wall polysaccharides with an effective amount of a spent whole fermentation broth of a recombinant microorganism, wherein the recombinant microorganism expresses one or more heterologous genes encoding enzymes which degrade or convert the plant cell wall polysaccharides into the one or more products. The present invention also relates to methods for producing an organic substance, comprising: (a) saccharifying plant cell wall polysaccharides with an effective amount of a spent whole fermentation broth of a recombinant microorganism, wherein the recombinant microorganism expresses one or more heterologous genes encoding enzymes which degrade or convert the plant cell wall polysaccharides into saccharified material; (b) fermenting the saccharified material of step (a) with one or more fermenting microoganisms; and (c) recovering the organic substance from the fermentation.

Berka, Randy (Davis, CA); Cherry, Joel (Davis, CA)

2008-08-19T23:59:59.000Z

92

Crystalline mesoporous zirconia catalysts having stable tetragonal pore wall structure  

DOE Patents (OSTI)

Methods are disclosed for the preparation of new sulfated mesoporous zirconia materials/catalysts with crystalline pore walls of predominantly tetragonal crystal structure, characterized by nitrogen physical sorption measurement, X-ray diffraction, transmission electron microscopy and catalytic tests using n-butane isomerization to iso-butane and alkylation of 1-naphthol with 4-tert-butylstyrene as probe reactions. Sulfate deposition is preferred for the transformation of a mesoporous precursor with amorphous pore walls into a material with crystalline pore walls maintaining the mesoporous characteristics. 17 figs.

Sachtler, W.M.H.; Huang, Y.Y.

1998-07-28T23:59:59.000Z

93

Towards improved spinnability of chemical vapor deposition generated multi-walled carbon nanotubes  

E-Print Network (OSTI)

P. J. F. 1999 Carbon nanotubes and related structures: newof vapor grown carbon nanotubes and single wall nanotubes, Eto Carbon Materials in Carbon Nanotubes: Preparation and

McKee, Gregg Sturdivant Burke

2008-01-01T23:59:59.000Z

94

BNL | Joseph S. Wall  

NLE Websites -- All DOE Office Websites (Extended Search)

Joseph S. Wall Joseph S. Wall Emeritus Research Interests Mass mapping of unstained biological molecules with the scanning transmission electron microscope (STEM), particularly assemblies of complexes from subunits of known size and shape. Examples include: Alzheimer's filaments, viral capsids, annelid hemoglobins, hemocyanins, proteases, chaperonins, microtubule proteins, prions and various nucleic acid-protein complexes. Another research area is instrument development involving design and construction of an instrument for low-temperture, energy loss spectroscopy, and elemental mapping at low dose. This is being used to map phosphorus in nucleic acid-protein complexes, phosphorylated proteins and phospholipid structures. He also is director of the Scanning Transmission Electron Microscope STEM

95

Sustainable wall construction and exterior insulation retrofit technology process and structure  

DOE Patents (OSTI)

A low-cost process for exterior wall insulation retrofit, or new wall construction by stacking layers of fabric tube filled with insulating material against a wall and covering them with mesh and stucco provides a durable structure with good insulating value.

Vohra, Arun (Bethesda, MD)

2000-01-01T23:59:59.000Z

96

The characterization of cell wall mutants of Arabidopsis thaliana, combined with biochemical approaches toward the  

E-Print Network (OSTI)

source of terrestrial biomass and renewable energy. Cell wall material is also of great practical migrations do not contribute to the development of the plant body, the planes of cell divisions photosynthetically fixed carbon is incorporated into cell wall polymers, making plant cell walls the most abundant

Reiter, Wolf-Dieter

97

Identification of Novel Cell Wall Components  

SciTech Connect

Our DOE Biosciences-funded work focused on the fungal cell wall and morphogenesis. We are especially interested in how new cell wall material is targeted to appropriate areas for polar (asymmetric) growth. Polar growth is the only way that filamentous fungi explore the environment to find suitable substrates to degrade. Work funded by this grant has resulted in a total of twenty peer-reviewed publications. In work funded by this grant, we identified nine Aspergillus nidulans temperature-sensitive (ts) mutants that fail to send out a germ tube and show a swollen cell phenotype at restrictive temperature, the swo mutants. In other organisms, a swollen cell phenotype is often associated with misdirected growth or weakened cell walls. Our work shows that several of the A. nidulans swo mutants have defects in the establishment and maintenance of polarity. Cloning of several swo genes by complementation also showed that secondary modification of proteins seems is important in polarity. We also investigated cell wall biosynthesis and branching based on leads in literature from other organisms and found that branching and nuclear division are tied and that the cell wall reorganizes during development. In our most recent work we have focused on gene expression during the shift from isotropic to polar growth. Surprisingly we found that genes previously thought to be involved only in spore formation are important in early vegetative growth as well.

Michelle Momany

2009-10-26T23:59:59.000Z

98

Single-Walle 4. Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

applications, carbon nanotube research is ac- tively being pursued in diverse areas including energy storage105 Single-Walle 4. Single-Walled Carbon Nanotubes Sebastien Nanot, Nicholas A. Thompson, Ji Single-walled carbon nanotubes (SWCNTs) are hol- low, long cylinders with extremely large aspect ratios

Kono, Junichiro

99

Metals and Materials ResearchMetals and Materials Research ColloquiumColloquium  

E-Print Network (OSTI)

-Cr-Mo alloy in ammoniated sulphate solution S. Zhou Ceramics Hydration Studies on Magnesia-Containing Bricks Q

British Columbia, University of

100

Stick-System Curtain Walls  

Science Journals Connector (OSTI)

Curtain walls can be divided in two main types according to the system of fabrication and installation: stick systems and unitised panels. The traditional curtain-wall construction is the stick system, where m...

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Synthesis of single-walled carbon nanotube (SWNTs) from size-selected catalytic metal particles.  

E-Print Network (OSTI)

Synthesis of single-walled carbon nanotube (SWNTs) from size-selected catalytic metal particles-quality synthesis of single-walled carbon nanotubes (SWNTs) has demonstrated new possibilities of applications and for the controlled synthesis directly on semiconductor materials. In this technique, it is known that material, size

Maruyama, Shigeo

102

PROJECTS FROM FEDERAL REGION IX DOE APPROPRIATE ENERGY TECHNOLOGY PILOT PROGRAM - PART I  

E-Print Network (OSTI)

with a rammed-earth Trombe wall, and traditional Navajorammed~brick walls and Trombe wall, laying out the building

Case, C.W.

2011-01-01T23:59:59.000Z

103

Covering Walls With Fabrics.  

E-Print Network (OSTI)

the glue a dull surface to adhere to. Fill any gouges or nail holes with patching plaster and sand smooth after they have dried thoroughly. Minor ripples can be covered with spackling compound, a plaster-like substance that is spread thinly... during dry weather and in a well-ventilated room. Cut each panel 3 inches longer than the ceiling height. Match and cut sufficient fabric widths to cover completely one wall at a time. Start with Corner I nstall the first fabric panel so...

Anonymous,

1979-01-01T23:59:59.000Z

104

A Study of the Filling of Wall Cavities With Retrofit Wall Insulation.  

SciTech Connect

The Pacific Northwest Power Marketing Agency, the Bonneville Power Administration (BPA), conducted a retrofit wall insulation study to determine the effects of various obstructions within a wall cavity, where voids are likely to occur, and preferred filling methods and material types. The insulation test structure was composed of four 8-foot /times/ 12-foot walls, and was built using standard construction practices. The inside walls were clear plastic glazing, instead of gypsum board, to enable viewing of the filling process. A total of eight tests were performed: four cellulose, two rockwool, and two fiberglass. One- and two-hole filling methods were observed. All insulations were found to perform in the same basic manner with all experiencing the same problem areas. Common installer problems were empty spaces at the tops of cavities and missed cavities, especially above headers. Wiring and lath and plaster consistently caused reduced insulation densities in cavities. The problems with wiring, lath and plaster, and other features in the wall cavities were avoided with the use of a filler tube. The filler tube also provided a more consistent fill along the length of the entire cavity. 2 figs., 3 tabs.

Flores, Joseph A.; Grill, Alan R.

1988-08-01T23:59:59.000Z

105

Domain walls in SU(5)  

Science Journals Connector (OSTI)

We consider the grand unified SU(5) model with a small or vanishing cubic term in the adjoint scalar field in the potential. This gives the model an approximate or exact Z2 symmetry whose breaking leads to domain walls. The simplest domain wall has the structure of a kink across which the Higgs field changes sign (??-?) and inside which the full SU(5) is restored. The kink is shown to be perturbatively unstable for all parameters. We then construct a domain wall solution that is lighter than the kink and show it to be perturbatively stable for a range of parameters. The symmetry in the core of this domain wall is smaller than that outside. The interactions of the domain wall with magnetic monopoles are discussed and it is shown that magnetic monopoles with certain internal space orientations relative to the wall pass through the domain wall. Magnetic monopoles in other relative internal space orientations are likely to be swept away on collision with the domain walls, suggesting a scenario where the domain walls might act like optical polarization filters, allowing certain monopole polarizations to pass through but not others. As SU(5) domain walls will also be formed at small values of the cubic coupling, this leads to a very complicated picture of the evolution of defects after the grand unified phase transition.

Levon Pogosian and Tanmay Vachaspati

2000-11-21T23:59:59.000Z

106

Hybrid materials and methods for producing the same  

DOE Patents (OSTI)

A hybrid material is provided which comprises a first single-walled nanotube having a lumen, and a fill molecule contained within the lumen of the single-walled nanotube. A method for producing the hybrid material is also provided wherein a single-walled nanotube is contacted with a fill molecule to cause the fill molecule to enter the lumen of the single-walled nanotube.

Luzzi, David E. (Wallingford, PA); Smith, Brian W. (Philadelphia, PA)

2008-02-19T23:59:59.000Z

107

Hybrid materials and methods for producing the same  

DOE Patents (OSTI)

A hybrid material is provided which comprises a first single-walled nanotube having a lumen, and a fill molecule contained within the lumen of the single-walled nanotube. A method for producing the hybrid material is also provided wherein a single-walled nanotube is contacted with a fill molecule to cause the fill molecule to enter the lumen of the single-walled nanotube.

Luzzi, David E. (Wallingford, PA); Smith, Brian W. (Schelton, CT)

2003-04-08T23:59:59.000Z

108

Domain Walls in Gapped Graphene  

Science Journals Connector (OSTI)

The electronic properties of a particular class of domain walls in gapped graphene are investigated. We show that they can support midgap states which are localized in the vicinity of the domain wall and propagate along its length. With a finite density of domain walls, these states can alter the electronic properties of gapped graphene significantly. If the midgap band is partially filled, the domain wall can behave like a one-dimensional metal embedded in a semiconductor and could potentially be used as a single-channel quantum wire.

G. W. Semenoff; V. Semenoff; Fei Zhou

2008-08-21T23:59:59.000Z

109

Oven wall panel construction  

DOE Patents (OSTI)

An oven roof or wall is formed from modular panels, each of which comprises an inner fabric and an outer fabric. Each such fabric is formed with an angle iron framework and somewhat resilient tie-bars or welded at their ends to flanges of the angle irons to maintain the inner and outer frameworks in spaced disposition while minimizing heat transfer by conduction and permitting some degree of relative movement on expansion and contraction of the module components. Suitable thermal insulation is provided within the module. Panels or skins are secured to the fabric frameworks and each such skin is secured to a framework and projects laterally so as slidingly to overlie the adjacent frame member of an adjacent panel in turn to permit relative movement during expansion and contraction.

Ellison, Kenneth (20 Avondale Cres., Markham, CA); Whike, Alan S. (R.R. #1, Caledon East, both of Ontario, CA)

1980-04-22T23:59:59.000Z

110

Dynamics of strings between walls  

SciTech Connect

Configurations of vortex-strings stretched between or ending on domain walls were previously found to be 1/4 BPS states. Among zero modes of string positions, the center of mass of strings in each region between two adjacent domain walls is shown to be non-normalizable whereas the rests are normalizable. We study dynamics of vortex-strings stretched between separated domain walls by using two methods, the moduli space (geodesic) approximation of full 1/4 BPS states and the charged particle approximation for string endpoints in the wall effective action. In the first method we obtain the effective Lagrangian explicitly and find the 90 degree scattering for head-on collision. In the second method the domain wall effective action is assumed to be U(1){sup N} gauge theory, and we find a good agreement between two methods for well separated strings. This talk is based on the work [1].

Eto, Minoru [INFN, Sezione di Pisa, Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Fujimori, Toshiaki; Nagashima, Takayuki [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Nitta, Muneto [Department of Physics, Keio University, Hiyoshi, Yokohama, Kanagawa 223-8521 (Japan); Ohashi, Keisuke [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, CB3 0WA (United Kingdom); Sakai, Norisuke [Department of Mathematics, Tokyo Woman's Christian University, Tokyo 167-8585 (Japan)

2008-11-23T23:59:59.000Z

111

Anchored nanostructure materials and method of fabrication  

DOE Patents (OSTI)

Anchored nanostructure materials and methods for their fabrication are described. The anchored nanostructure materials may utilize nano-catalysts that include powder-based or solid-based support materials. The support material may comprise metal, such as NiAl, ceramic, a cermet, or silicon or other metalloid. Typically, nanoparticles are disposed adjacent a surface of the support material. Nanostructures may be formed as anchored to nanoparticles that are adjacent the surface of the support material by heating the nano-catalysts and then exposing the nano-catalysts to an organic vapor. The nanostructures are typically single wall or multi-wall carbon nanotubes.

Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

2012-11-27T23:59:59.000Z

112

Resuspension of wall deposits in spray dryers  

Science Journals Connector (OSTI)

Wall deposition occurs in spray dryers when dried or partially dried particles contact and adhere to the walls during operation, thus reducing the yield of product collected. Wall deposits also present a product ...

M. J. Hanus; T. A. G. Langrish

2007-10-01T23:59:59.000Z

113

Electrochemical and Raman measurements on single-walled carbon nanotubes  

E-Print Network (OSTI)

Electrochemical and Raman measurements on single-walled carbon nanotubes M. Stoll a,*, P performed on a carbon nanotube mat as a working electrode using different salt solutions. The gravimetric capacitance of the nanotube material was estimated and its effective surface area was de- termined in a purely

Nabben, Reinhard

114

Geckobot and Waalbot: Small-Scale Wall Climbing Ozgur Unver  

E-Print Network (OSTI)

surfaces smooth metal or painted structures. This paper proposes two semi-autonomous small-scale robotGeckobot and Waalbot: Small-Scale Wall Climbing Robots Ozgur Unver oUnver@andrew.cmu.edu Michael P robots able to navigate on smooth vertical surfaces which use adhesive materials for attachment. Geckobot

Sitti, Metin

115

Single-Walled Carbon Nanotubes for High-Energy Optical Pulse Formation Yong-Won Song  

E-Print Network (OSTI)

- 1 - Single-Walled Carbon Nanotubes for High-Energy Optical Pulse Formation Yong-Won Song Center-Walled Carbon Nanotubes for High-Energy Optical Pulse Formation Authors: Yong-Won Song, Shinji Yamashita, Shigeo for Energy Materials Research, Korea Institute of Science and Technology, Seoul 136-791, Korea E-mail: ysong

Maruyama, Shigeo

116

Raman intensity measurements of single-walled carbon nanotube suspensions as a quantitative technique  

E-Print Network (OSTI)

Raman intensity measurements of single-walled carbon nanotube suspensions as a quantitative, Biological and Materials Engineering, Carbon Nanotube Technology Center (CANTEC), University of Oklahoma, 100 the purity of single-walled carbon nanotube (SWCNT) bulk samples based on Raman spectroscopy is reported

Resasco, Daniel

117

Self-assembled three-dimensional conducting network of single-wall carbon nanotubes  

E-Print Network (OSTI)

Self-assembled three-dimensional conducting network of single-wall carbon nanotubes Graciela B (Received 11 March 2004; accepted 8 June 2004) We described here the self-assembling of a three-dimensional array of single-wall nanotubes (SWNTs). The distinctive choice of materials allowed for the self-assembly

Hone, James

118

Process for forming a long gas turbine engine blade having a main wall with a thin portion near a tip  

DOE Patents (OSTI)

A process is provided for forming an airfoil for a gas turbine engine involving: forming a casting of a gas turbine engine airfoil having a main wall and an interior cavity, the main wall having a wall thickness extending from an external surface of the outer wall to the interior cavity, an outer section of the main wall extending from a location between a base and a tip of the airfoil casting to the tip having a wall thickness greater than a final thickness. The process may further involve effecting movement, using a computer system, of a material removal apparatus and the casting relative to one another such that a layer of material is removed from the casting at one or more radial portions along the main wall of the casting.

Campbell, Christian X; Thomaidis, Dimitrios

2014-05-13T23:59:59.000Z

119

Advanced high performance solid wall blanket concepts C.P.C. Wong a,  

E-Print Network (OSTI)

and desirable attributes for the reactor design. Future needs and directions on the development of advanced FW of first wall coating material selection, design of plasma stabilization coils, consideration of reactor concepts for comparison

Raffray, A. René

120

Irradiated Materials Examination and Testing Facility (IMET) | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Irradiated Materials Examination and Testing Facility Irradiated Materials Examination and Testing Facility May 30, 2013 The Irradiated Material Examination and Testing (IMET) Facility was designed and built as a hot cell facility. It is a two-story block and brick structure with a two-story high bay that houses six heavily shielded cells and an array of sixty shielded storage wells. It includes the Specimen Prep Lab (SPL) with its associated laboratory hood and glove boxes, an Operating Area, where the control and monitoring instruments supporting the in-cell test equipment are staged, a utility corridor, a hot equipment storage area, a tank vault room, office space, a trucking area with access to the high bay, and an outside steel building for storage. The tests and examinations are conducted in six examination "hot" cells

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Fusion materials modeling: Challenges and opportunities  

E-Print Network (OSTI)

The plasma facing components, first wall, and blanket systems of future tokamak-based fusion power plants arguably represent the single greatest materials engineering challenge of all time. Indeed, the United States National ...

Wirth, B. D.

122

Dynamics of strings between walls  

SciTech Connect

Configurations of vortex strings stretched between or ending on domain walls were previously found to be 1/4 Bogomol'nyi-Prasad-Sommerfield (BPS) states in N=2 supersymmetric gauge theories in 3+1 dimensions. Among zero modes of string positions, the center of mass of strings in each region between two adjacent domain walls is shown to be non-normalizable whereas the rests are normalizable. We study dynamics of vortex strings stretched between separated domain walls by using two methods, the moduli space (geodesic) approximation of full 1/4 BPS states and the charged particle approximation for string end points in the wall effective action. In the first method we explicitly obtain the effective Lagrangian in the strong coupling limit, which is written in terms of hypergeometric functions, and find the 90 deg. scattering for head-on collision. In the second method the domain wall effective action is assumed to be U(1){sup N} gauge theory, and we find a good agreement between two methods for well-separated strings.

Eto, Minoru [INFN, Sezione di Pisa, Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Department of Physics, University of Pisa Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Fujimori, Toshiaki; Nagashima, Takayuki [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Nitta, Muneto [Department of Physics, Keio University, Hiyoshi, Yokohama, Kanagawa 223-8521 (Japan); Ohashi, Keisuke [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, CB3 0WA (United Kingdom); Sakai, Norisuke [Department of Mathematics, Tokyo Woman's Christian University, Tokyo 167-8585 (Japan)

2009-02-15T23:59:59.000Z

123

Insulation Materials | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Materials Materials Insulation Materials May 30, 2012 - 10:08am Addthis Cellulose, a fiber insulation material with a high recycled content, is blown into a home attic. | Photo courtesy of Cellulose Insulation Manufacturers Association. Cellulose, a fiber insulation material with a high recycled content, is blown into a home attic. | Photo courtesy of Cellulose Insulation Manufacturers Association. Blown-in fiberglass insulation thoroughly fills the stud cavities in this home. | Photo courtesy of Bob Hendron, NREL. Blown-in fiberglass insulation thoroughly fills the stud cavities in this home. | Photo courtesy of Bob Hendron, NREL. Rigid foam board adds R-value to this wall in a Florida home. | Photo courtesy of FSEC/IBACOS. Rigid foam board adds R-value to this wall in a Florida home. | Photo

124

Insulation Materials | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Insulation Materials Insulation Materials Insulation Materials May 30, 2012 - 10:08am Addthis Cellulose, a fiber insulation material with a high recycled content, is blown into a home attic. | Photo courtesy of Cellulose Insulation Manufacturers Association. Cellulose, a fiber insulation material with a high recycled content, is blown into a home attic. | Photo courtesy of Cellulose Insulation Manufacturers Association. Blown-in fiberglass insulation thoroughly fills the stud cavities in this home. | Photo courtesy of Bob Hendron, NREL. Blown-in fiberglass insulation thoroughly fills the stud cavities in this home. | Photo courtesy of Bob Hendron, NREL. Rigid foam board adds R-value to this wall in a Florida home. | Photo courtesy of FSEC/IBACOS. Rigid foam board adds R-value to this wall in a Florida home. | Photo

125

Mold susceptibility of rapidly renewable materials used in wall construction  

E-Print Network (OSTI)

With the eye-opening results of life cycle analysis in mind, sustainability is becoming an important concern, encompassing many topics from waste and energy consumption to the types of products used in the production of homes and buildings. In addition... potable water is necessary for hygiene, sanitation, nourishment, and the production of goods. Energy and power sources are critical for transportation, technology and comforts, and communication and education. Abundant natural resources are required...

Cooper, Aaron McGill

2009-05-15T23:59:59.000Z

126

Domain Walls, Triples and Acceleration  

E-Print Network (OSTI)

We present a construction of domain walls in string theory. The domain walls can bridge both Minkowski and AdS string vacua. A key ingredient in the construction are novel classical Yang-Mills configurations, including instantons, which interpolate between toroidal Yang-Mills vacua. Our construction provides a concrete framework for the study of inflating metrics in string theory. In some cases, the accelerating space-time comes with a holographic description. The general form of the holographic dual is a field theory with parameters that vary over space-time.

Travis Maxfield; Savdeep Sethi

2014-04-09T23:59:59.000Z

127

Liquid Walls Innovative Concepts for First Walls and Blankets  

E-Print Network (OSTI)

rrr ?= V r J r PV r B r 1P 2P g r + - V r #12;Liquid Wall Options Thickness · Thin (~ 2cm with existing technology · Size of plasma devices and power plants can be substantially reduced High Poloidal

Abdou, Mohamed

128

Improved Materials for High-Temperature Black Liquor Gasification  

SciTech Connect

The laboratory immersion test system built and operated at ORNL was found to successfully screen samples from numerous refractory suppliers, including both commercially available and experimental materials. This system was found to provide an accurate prediction of how these materials would perform in the actual gasifier environment. Test materials included mullites, alumino-silicate bricks, fusion-cast aluminas, alumina-based and chrome-containing mortars, phosphate-bonded mortars, coated samples provided under an MPLUS-funded project, bonded spinels, different fusion-cast magnesia-alumina spinels with magnesia content ranging from 2.5% to about 60%, high-MgO castable and brick materials, spinel castables, and alkali-aluminate materials. This testing identified several candidate material systems that perform well in the New Bern gasifier. Fusion-cast aluminas were found to survive for nearly one year, and magnesia-alumina spinels have operated successfully for 18 months and are expected to survive for two years. Alkali-aluminates and high-MgO-content materials have also been identified for backup lining applications. No other material with a similar structure and chemical composition to that of the fusion-cast magnesium-aluminum spinel brick currently being used for the hot-face lining is commercially available. Other materials used for this application have been found to have inferior service lives, as previously discussed. Further, over 100 laboratory immersion tests have been performed on other materials (both commercial and experimental), but none to date has performed as well as the material currently being used for the hot-face lining. Operating experience accumulated with the high-temperature gasifier at New Bern, North Carolina, has confirmed that the molten alkali salts degrade many types of refractories. Fusion-cast alumina materials were shown to provide a great improvement in lifetime over materials used previously. Further improvement was realized with fusion-cast magnesia-alumina spinel refractory, which appears to be the most resistant to degradation found to date, exhibiting over a year of service life and expected to be capable of over two years of service life. Regarding the use of refractory mortar, it was found that expansion of the current chrome-alumina mortar when subjected to black liquor smelt is likely contributing to the strains seen on the vessel shell. Additionally, the candidate high-alumina mortar that was originally proposed as a replacement for the current chrome-alumina mortar also showed a large amount of expansion when subjected to molten smelt. A UMR experimental mortar, composed of a phosphate bonded system specifically designed for use with fusion-cast magnesium-aluminum spinel, was found to perform well in the molten smelt environment. Strain gauges installed on the gasifier vessel shell provided valuable information about the expansion of the refractory, and a new set of strain gauges and thermocouples has been installed in order to monitor the loading caused by the currently installed spinel refractory. These results provide information for a direct comparison of the expansion of the two refractories. Measurements to date suggest that the fusion-cast magnesia-alumina spinel is expanding less than the fusion-cast {alpha}/{beta}-alumina used previously. A modified liquor nozzle was designed and constructed to test a number of materials that should be more resistant to erosion and corrosion than the material currently used. Inserts made of three erosion-resistant metallic materials were fabricated, along with inserts made of three ceramic materials. The assembled system was sent to the New Bern mill for installation in the gasifer in 2005. Following operation of the gasifier using the modified nozzle, inserts should be removed and analyzed for wear by erosion/corrosion. Although no materials have been directly identified for sensor/thermocouple protection tubes, several of the refractory material systems identified for lining material applications may be applicable for use in this

Keiser, J.R.; Hemrick, J.G.; Gorog, J.P.; Leary, R.

2006-06-29T23:59:59.000Z

129

Mud-Brick Architecture  

E-Print Network (OSTI)

Publishers. Minault-Gout, Anne, and Patrick Deleuze 1992at Balat/Ain Asil (Minault-Gout and Deleuze 1992: 15 - 30,

Emery, Virginia L.

2011-01-01T23:59:59.000Z

130

Mud-Brick Architecture  

E-Print Network (OSTI)

this layer with mud plaster (fig. 2; Arnold 2003: 47;with reeds coated in mud plaster, were the source of many ofprehistoric period, mud plaster increasingly was employed

Emery, Virginia L.

2011-01-01T23:59:59.000Z

131

Heavy wall casing in C110 grade for sour service  

SciTech Connect

The recent developments of high pressure and sour wells in the North Sea area have increased the need for high strength H{sub 2}S resistant carbon steels. Steel chemistry and heat treatment solutions have been available to provide products suitable for use in these environments within the constraints of classic well design since the early 90`s but operators are now demanding higher strength and heavier wall products for HPHT wells. Well completion design teams are now specifying from OCTG suppliers C110 grade products in increasingly heavy wall and the challenge facing suppliers is to guarantee product integrity not only of these heavy wall casing but also the associated coupling stocks. This paper was aimed at evaluating the performances of thick walled C110 tubulars (up to 2in) for sour environments. Metallurgical characteristics (microstructure, structure, microhardness), mechanical properties (hardness, tensile, toughness), Sulfide Stress Cracking resistance (smooth tensile, DCB) have been investigated throughout the wall thickness. The C110 proprietary grade proved to be an excellent material for use as Oil Country Tubular Goods (OCTG) in typical North Sea environments with improved assessment of H2S corrosion resistance properties according to both NACE and EFC (European Federation of Corrosion) philosophies.

Linne, C.P.; Blanchard, F.; Puissochet, F. [Vallourec Research Center, Aulnoye Aymeries (France). Corrosion and Metallurgical Dept.; Orlans-Joliet, B.J.; Hamilton, R.S.

1998-12-31T23:59:59.000Z

132

Materialism and materiality  

Science Journals Connector (OSTI)

Accountants and auditors in recent financial scandals have been pictured as materialistic, simply calculating consequences and ignoring duties. This paper potentially explains this apparently materialistic behaviour in what has historically been a truthtelling profession. Materiality, which drives audit priorities, has been institutionalised in accounting and auditing standards. But a materiality focus inherently implies that all amounts that are not 'materially' misstated are equally true. This leads to habitual immaterial misstatements and promotes the view that auditors do not care about truth at all. Auditors' lack of commitment to truth undermines their claim to be professionals in the classic sense.

Michael K. Shaub

2005-01-01T23:59:59.000Z

133

Dynamics of Domain Wall Networks  

E-Print Network (OSTI)

Networks or webs of domain walls are admitted in Abelian or non-Abelian gauge theory coupled to fundamental Higgs fields with complex masses. We examine the dynamics of the domain wall loops by using the moduli approximation and find a phase rotation induces a repulsive force which can be understood as a Noether charge of Q-solitons. Non-Abelian gauge theory allows different types of loops which can be deformed to each other by changing a modulus. This admits the moduli geometry like a sandglass made by gluing the tips of the two cigar-(cone-)like metrics of a single triangle loop. We conclude that the sizes of all loops tend to grow for a late time in general models with complex Higgs masses, while the sizes are stabilized at some values once triplet masses are introduced for the Higgs fields. We also show that the stationary motion on the moduli space of the domain wall webs represents 1/4 BPS Q-webs of walls.

Minoru Eto; Toshiaki Fujimori; Takayuki Nagashima; Muneto Nitta; Keisuke Ohashi; Norisuke Sakai

2007-07-22T23:59:59.000Z

134

Dynamics of domain wall networks  

SciTech Connect

Networks or webs of domain walls are admitted in Abelian or non-Abelian gauge theory coupled to fundamental Higgs fields with complex masses. We examine the dynamics of the domain wall loops by using the moduli approximation and find a phase rotation induces a repulsive force which can be understood as a Noether charge of Q-solitons. Non-Abelian gauge theory allows different types of loops which can be deformed to each other by changing a modulus. This admits the moduli geometry like a sandglass made by gluing the tips of the two cigar-(cone-)like metrics of a single triangle loop. We conclude that the sizes of all loops tend to grow for a late time in general models with complex Higgs masses, while the sizes are stabilized at some values once triplet masses are introduced for the Higgs fields. We also show that the stationary motion on the moduli space of the domain wall webs represents 1/4 Bogomol'nyi-Prasad-Sommerfield Q-webs of walls.

Eto, Minoru [INFN, Sezione di Pisa, Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Department of Physics, University of Pisa Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Fujimori, Toshiaki; Nagashima, Takayuki; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Nitta, Muneto [Department of Physics, Keio University, Hiyoshi, Yokohama, Kanagawa 223-8521 (Japan); Ohashi, Keisuke [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, CB3 0WA (United Kingdom)

2007-12-15T23:59:59.000Z

135

Remarks on Liquid Wall Research Mohamed Abdou  

E-Print Network (OSTI)

Wall Research Advances the Science and Energy Goals of Fusion in a Perfect Fit · If we can make liquidRemarks on Liquid Wall Research Mohamed Abdou Professor Mechanical and Aerospace Engineering UCLA Note For recent presentations and papers on liquid wall research by the APEX team see website: http

Abdou, Mohamed

136

Study on a Kind of Eco-concrete Retaining Wall's Block with Water Purification Function  

Science Journals Connector (OSTI)

Considering the environmental protection requirements for retaining wall and slope protection in Civil engineering and construction of water conservancy, a new type of retaining wall materials and structures with functions of slop reinforcement, slope greening and water purification was studied. In this paper, it designed a kind of Eco-concrete retaining wall's block which has functions of slope vegetation planting and water purification, and studied functions of water purification of this kind of Eco-concrete retaining wall's block through the water quality purification experiment. It shows that, the maximal disposable removal rates of CoDcr, TN and TP are respectively 87%, 70% and 90%, which means that functions of water purification of this kind of Eco-concrete retaining wall's block are very good.

Song Wen-jie; Fu Hong-yuan; Wang Gui-yao

2012-01-01T23:59:59.000Z

137

Field measurements of lateral earth pressures on a pre-cast panel retaining wall  

E-Print Network (OSTI)

Test Wall Description Instrumentation Installation of Pressure Cells and Transducers Backfilling Procedure Properties of the Backfill Material Placement of Clay Backfill DATA COLLECTION Earth Pressure Cell Measurements Force Transducer... Analysis of Backfill Material 2 Lateral Earth Pressures Measured by Pressure Cells (Psi) . . . . . . . . . . . - . ~ . ~ 3 Maximum Deviation From Zero Gage Reading and Temperature Relationship. . . . 4 Forces Measured by Force Transducers (Kips) 5...

Prescott, David Monroe

2012-06-07T23:59:59.000Z

138

Skyrmions from Instantons inside Domain Walls  

SciTech Connect

Some years ago, Atiyah and Manton described a method to construct approximate Skyrmion solutions from Yang-Mills instantons. Here we present a dynamical realization of this construction using domain walls in a five-dimensional gauge theory. The non-Abelian gauge symmetry is broken in each vacuum but restored in the core of the domain wall, allowing instantons to nestle inside the wall. We show that the world volume dynamics of the wall is given by the Skyrme model, including the four-derivative term, and the instantons appear as domain wall Skyrmions.

Eto, Minoru; Nitta, Muneto; Ohashi, Keisuke [Department of Physics, Tokyo Institute of Technology, Tokyo, 152-8551 (Japan); Tong, David [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, Cambridge CB3 0WA (United Kingdom)

2005-12-16T23:59:59.000Z

139

E-Print Network 3.0 - alternative backfill materials Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Taylor & Francis Group, London, ISBN 978-0-415-45775-0 Summary: simple to design, concrete wall alternatives have generally led to elevated construction and material... sand as...

140

Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Materials Science Materials Science1354608000000Materials ScienceSome of these resources are LANL-only and will require Remote Access./No/Questions? 667-5809library@lanl.gov Materials Science Some of these resources are LANL-only and will require Remote Access. Key Resources Data Sources Reference Organizations Journals Key Resources CINDAS Materials Property Databases video icon Thermophysical Properties of Matter Database (TPMD) Aerospace Structural Metals Database (ASMD) Damage Tolerant Design Handbook (DTDH) Microelectronics Packaging Materials Database (MPMD) Structural Alloys Handbook (SAH) Proquest Technology Collection Includes the Materials Science collection MRS Online Proceedings Library Papers presented at meetings of the Materials Research Society Data Sources

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Reference Material  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Materials There are a variety of reference materials the NSSAB utilizes and have been made available on its website. Documents Fact Sheets - links to Department of Energy...

142

Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science science-innovationassetsimagesicon-science.jpg Materials Science National security depends on science and technology. The United States relies on Los Alamos...

143

Argonne CNM News: Study of Ferroelectric Domain Walls Offers a New  

NLE Websites -- All DOE Office Websites (Extended Search)

Study of Ferroelectric Domain Walls Offers a New Nanoscale Conduction Path Study of Ferroelectric Domain Walls Offers a New Nanoscale Conduction Path Scanning tunneling microscopy tips SPM images of the (110) surface of cleaved h-HoMnO3. (top) PFM image showing in-plane ferroelectric domains (oriented vertically, red arrows). (bottom) cAFM image showing enhanced conduction along tail-to-tail domain walls; images are 4 microns per side. Facility users from Rutgers University together with the Center for Nanoscale Materials' Electronic & Magnetic Materials & Devices Group have identified two-dimensional sheets of charge formed at the boundaries of ferroelectric domains in a multiferroic material. These two-dimensional charged sheets are not pinned by unstable defects, chemical dopants, or structural interface, but are formed naturally as the inevitable

144

Quantum Fusion of Domain Walls with Fluxes  

E-Print Network (OSTI)

We study how fluxes on the domain wall world volume modify quantum fusion of two distant parallel domain walls into a composite wall. The elementary wall fluxes can be separated into parallel and antiparallel components. The parallel component affects neither the binding energy nor the process of quantum merger. The antiparallel fluxes, instead, increase the binding energy and, against naive expectations, suppress quantum fusion. In the small flux limit we explicitly find the bounce solution and the fusion rate as a function of the flux. We argue that at large (antiparallel) fluxes there exists a critical value of the flux (versus the difference in the wall tensions), which switches off quantum fusion altogether. This phenomenon of flux-related wall stabilization is rather peculiar: it is unrelated to any conserved quantity. Our consideration of the flux-related all stabilization is based on substantiated arguments that fall short of complete proof.

S. Bolognesi; M. Shifman; M. B. Voloshin

2009-07-20T23:59:59.000Z

145

Panelized wall system with foam core insulation  

DOE Patents (OSTI)

A wall system includes a plurality of wall members, the wall members having a first metal panel, a second metal panel, and an insulating core between the first panel and the second panel. At least one of the first panel and the second panel include ridge portions. The insulating core can be a foam, such as a polyurethane foam. The foam can include at least one opacifier to improve the k-factor of the foam.

Kosny, Jan (Oak Ridge, TN); Gaskin, Sally (Houston, TX)

2009-10-20T23:59:59.000Z

146

Use of silica waste from the Cerro Prieto geothermal field as construction material  

SciTech Connect

The Cerro Prieto geothermal field generates 620 MW of electric power and in the process produces 11,000 tonnes of brine per hour that is disposed of in surface ponds. Approximately 1300 tonnes of silica waste is the residual product from this hourly production of brine. At present, there is no use for this waste silica. Some experimental work has been undertaken by CFE to utilize this waste silica such as for surfacing roads with a cement-silica mixture and making bricks with various additives. However, none of this research has been documented. Approximately two years ago, a joint USDOE/CFE research project was proposed to investigate the use of the waste silica. The proposal included using the silica mixed with asphalt and cement to produce a suitable road surfacing material, and to combine the silica with various additives to be used as bricks for low cost housing. It was thought, that the low specific gravity of the silica and the proposed mixtures would give the bricks a high insulating value (low-thermal conductivity), thus protecting the residents from high solar heating, typical of Baja California and the area around Mexicali. Finally, since the geothermal fields of the area extend into the Imperial Valley of California where 420 MW of geothermal power is generated, it was hoped that this research would also be applicable to the U.S. side of the border. Some attempt has been made by UNOCAL at their Imperial Valley plant (now owned by Magma Power) to use the waste silica stabilized with cement for roads and dikes around the plant.

Lund, J.W.; Boyd, T.; Monnie, D.

1995-02-01T23:59:59.000Z

147

Materials: Soft machines made like Lego  

Science Journals Connector (OSTI)

... The team argues that click-e-bricks offer a faster alternative to 3D printing, which relies on hard acrylic polymers that limit the composition and complexity of the ...

2014-08-20T23:59:59.000Z

148

Skyrmions from Instantons inside Domain Walls  

E-Print Network (OSTI)

Some years ago, Atiyah and Manton described a method to construct approximate Skyrmion solutions from Yang-Mills instantons. Here we present a dynamical realization of this construction using domain walls in a five-dimensional gauge theory. The non-abelian gauge symmetry is broken in each vacuum but restored in the core of the domain wall, allowing instantons to nestle inside the wall. We show that the worldvolume dynamics of the wall is given by the Skyrme model, including the four-derivative term, and the instantons appear as Skyrmions.

Minoru Eto; Muneto Nitta; Keisuke Ohashi; David Tong

2005-08-18T23:59:59.000Z

149

Modeling Drilled Shafts in MSE Block Walls  

E-Print Network (OSTI)

ACKNOWLEDGEMENTS xii ABSTRACT xiii 1 INTRODUCTION 1 2 LITERATURE REVIEW 3 2.1 Physical Testing 3 2.1.1 MSE Wall Design (FHWA) 3 2.1.2 Design of Laterally Loaded Shafts 6 2.1.3 Design of Drilled Shafts Supporting Sound Walls 7 2.1.4 Topics Related to MSE... Wall Interaction with Bridges 8 2.1.5 Lateral Loading of Facing and Retained Soil 9 2.1.6 Physical Test Results 11 2.1.6.1 Construction and Instrumentation of Test Wall 12 2.1.6.2 Physical Testing and Results 17 2.2 Numerical Approaches 22 2...

Pierson, Matthew Charles

2010-09-01T23:59:59.000Z

150

Beetle Kill Wall at NREL  

ScienceCinema (OSTI)

When it comes to designing an interior decorative feature for one of the most energy efficient office buildings in the world, very few would consider bringing in a beetle to do the job. But thats what happened at the U.S. Department of Energy's (DOE) Research Support Facility (RSF) located on the National Renewable Energy Laboratory (NREL) campus.In June, the RSF will become home to more than 800 workers from DOE and NREL and building visitors will be greeted with a soaring, two-story high wall entirely covered with wood harvested from the bark beetle infestation that has killed millions of pine trees in the Western U.S. But, the use of beetle kill wood is just one example of the resources being leveraged to make the RSF a model for sustainability and one more step toward NRELs goal to be a net zero energy campus.

None

2013-05-29T23:59:59.000Z

151

Virtual gap dielectric wall accelerator  

DOE Patents (OSTI)

A virtual, moving accelerating gap is formed along an insulating tube in a dielectric wall accelerator (DWA) by locally controlling the conductivity of the tube. Localized voltage concentration is thus achieved by sequential activation of a variable resistive tube or stalk down the axis of an inductive voltage adder, producing a "virtual" traveling wave along the tube. The tube conductivity can be controlled at a desired location, which can be moved at a desired rate, by light illumination, or by photoconductive switches, or by other means. As a result, an impressed voltage along the tube appears predominantly over a local region, the virtual gap. By making the length of the tube large in comparison to the virtual gap length, the effective gain of the accelerator can be made very large.

Caporaso, George James; Chen, Yu-Jiuan; Nelson, Scott; Sullivan, Jim; Hawkins, Steven A

2013-11-05T23:59:59.000Z

152

Characterization of Nanoscale Reinforced Polymer Composites as Active Materials  

E-Print Network (OSTI)

Single walled carbon nanotube (SWNT)-based polymer nanocomposites have generated a lot of interest as potential multifunctional materials due to the exceptional physical properties of SWNTs. To date, investigations into the electromechanical...

Deshmukh, Sujay

2012-02-14T23:59:59.000Z

153

Remarks on Liquid Wall Research Mohamed Abdou  

E-Print Network (OSTI)

Remarks on Liquid Wall Research Mohamed Abdou Professor Mechanical and Aerospace Engineering UCLA physicists and engineering scientists · Enhances synergism between IFE and MFE · Provides excellent disciplines. #12;Several "Ideas" Have Been Proposed for Liquid Walls Fluids 1) High-conductivity, low Pr

California at Los Angeles, University of

154

The logic behind thick, liquid-walled, fusion concepts  

SciTech Connect

It may be possible to surround the region where fusion reactions are taking place with a neutronically thick liquid blanket which has penetrations that allow only a few tenths of a percent of the neutrons to leak out. Even these neutrons can be attenuated by adding an accurately placed liquid or solid near the target to shadow-shield the beam ports from line-of-sight neutrons. The logic of such designs are discussed and their evolution is described with examples applied to both magnetic and inertial fusion (HYLIFE-II). These designs with liquid protection are self healing when exposed to pulsed loading and have a number of advantages-over the usual designs with solid first walls. For example, the liquid-protected solid components will last the life of the plant, and therefore the capacity factor is estimated to be approximately 10% higher than for the non-liquid-walled blankets, because no blanket replacement shutdowns are required. The component replacement, operations, and maintenance costs might be half the usual value because no blanket change-out costs or accompanying facilities are required. These combined savings might lower the cost of electricity by 20%. Nuclear-grade construction should not be needed, largely because the liquid attenuates neutrons and results in less activation of materials. Upon decommissioning, the reactor materials should qualify for disposal by shallow burial even when constructed of ordinary 304 stainless steel. The need for a high-intensity 14-MeV neutron test facility to develop first-wall materials is avoided or greatly reduced, saving billions of development dollars. Flowing molten Li, the molten salt Flibe (Li{sub 2}BeF{sub 4}), and molten Li{sub l7}Pb{sub 83} have been considered. An advantage of molten salt is that it will not burn and has a low tritium solubility and therefore low tritium inventory.

Moir, R.W.

1994-04-15T23:59:59.000Z

155

Single-wall carbon nanotubes as coherent plasmon generators  

Science Journals Connector (OSTI)

The possibility of low-energy surface plasmon amplification by optically excited excitons in small-diameter single-wall carbon nanotubes is theoretically demonstrated. The nonradiative exciton-plasmon energy transfer causes the buildup of macroscopic population numbers of coherent localized surface plasmons associated with high-intensity coherent local fields formed at nanoscale throughout the nanotube surface. These strong local fields can be used in a variety of new optoelectronic applications of carbon nanotubes, including near-field nonlinear-optical probing and sensing, optical switching, enhanced electromagnetic absorption, and materials nanoscale modification.

I. V. Bondarev

2012-01-30T23:59:59.000Z

156

Polymer and carbon nanotube materials for chemical sensors and organic electronics  

E-Print Network (OSTI)

This thesis details the development of new materials for high-performance chemical sensing as well as organic electronic applications. In Chapter 2, we develop a chemiresistive material based on single-walled carbon nanotubes ...

Wang, Fei, Ph. D. Massachusetts Institute of Technology

2010-01-01T23:59:59.000Z

157

Materializing energy  

Science Journals Connector (OSTI)

Motivated and informed by perspectives on sustainability and design, this paper draws on a diverse body of scholarly works related to energy and materiality to articulate a perspective on energy-as-materiality and propose a design approach of ... Keywords: design, design theory, energy, materiality, sustainability

James Pierce; Eric Paulos

2010-08-01T23:59:59.000Z

158

FREE CONVECTIVE LAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL  

E-Print Network (OSTI)

LAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL H. Akbarf andLAMINAR FLOW WITHIN THE TROMBE WALL CHANNEL H. Akbari andchannel surfaces of the Trombe wall has been investigated.

Akbari, H.

2011-01-01T23:59:59.000Z

159

APEX ADVANCED FERRITIC STEEL, FLIBE SELF-COOLED FIRST WALL AND BLANKET DESIGN  

SciTech Connect

OAK-B135 As an element in the US Advanced Power Extraction (APEX) program, they evaluated the design option of using advanced nanocomposite ferritic steel (AFS) as the structural material and Flibe as the tritium breeder and coolant. They selected the recirculating flow configuration as the reference design. Based on the material properties of AFS, they found that the reference design can handle a maximum surface heat flux of 1 MW/m{sup 2}, and a maximum neutron wall loading of 5.4 MW/m{sup 2}, with a gross thermal efficiency of 47%, while meeting all the tritium breeding and structural design requirements. This paper covers the results of the following areas of evaluation: materials selection, first wall and blanket design configuration, materials compatibility, components fabrication, neutronics analysis, thermal hydraulics analysis including MHD effects, structural analysis, molten salt and helium closed cycle power conversion system, and safety and waste disposal of the recirculating coolant design.

WONG,CPC; MALANG,S; SAWAN,M; SVIATOSLAVSKY,I; MOGAHED,E; SMOLENTSEV,S; MAJUMDAR,S; MERRILL,B; MATTAS,R; FRIEND,M; BOLIN,J; SHARAFAT,S

2003-11-01T23:59:59.000Z

160

Effective Action of Domain Wall Networks  

E-Print Network (OSTI)

U(Nc) gauge theory with Nf fundamental scalars admits BPS junctions of domain walls. When the networks/webs of these walls contain loops, their size moduli give localized massless modes. We construct Kahler potential of their effective action. In the large size limit Kahler metric is well approximated by kinetic energy of walls and junctions, which is understood in terms of tropical geometry. Kahler potential can be expressed in terms of hypergeometric functions which are useful to understand small size behavior. Even when the loop shrinks, the metric is regular with positive curvature. Moduli space of a single triangle loop has a geometry between a cone and a cigar.

Minoru Eto; Toshiaki Fujimori; Takayuki Nagashima; Muneto Nitta; Keisuke Ohashi; Norisuke Sakai

2006-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Hydrogenation of single-walled carbon nanotubes  

E-Print Network (OSTI)

Towards the development of a useful mechanism for hydrogen storage, we have studied the hydrogenation of single-walled carbon nanotubes with atomic hydrogen using core-level photoelectron spectroscopy and x-ray absorption spectroscopy. We find that atomic hydrogen creates C-H bonds with the carbon atoms in the nanotube walls and such C-H bonds can be com-pletely broken by heating to 600 oC. We demonstrate approximately 65+/-15 at % hydrogenation of carbon atoms in the single-walled carbon nanotubes which is equivalent to 5.1+/-1.2 weight % hydrogen capacity. We also show that the hydrogenation is a reversible process.

Anton Nikitin; Hirohito Ogasawara; David Mann; Reinhard Denecke; Zhiyong Zhang; Hongjie Dai; KJ Cho; Anders Nilsson

2005-10-14T23:59:59.000Z

162

Thermal boundary resistance between single-walled carbon nanotubes and surrounding matrices  

E-Print Network (OSTI)

Thermal boundary resistance between single-walled carbon nanotubes and surrounding matrices Carl Keywords: carbon nanotube, thermal boundary resistance, molecular dynamics 1 #12;I. INTRODUCTION the thermal conductivity of insulating materials15,16 . The mechanical strength and light weight of polymers

Maruyama, Shigeo

163

Computational modeling of domain wall interactions with dislocations in ferroelectric crystals  

E-Print Network (OSTI)

harness the rich potential of ferroelectrics it is impor- tant to investigate their constitutive behavior of dislocations in the case that domain walls move due the application of external electric field and shear stress, and therefore affect the ferro- electric material behavior. ? 2008 Elsevier Ltd. All rights reserved. 1

164

Fracture resistance of single-walled carbon nanotubes through atomistic Qiang Lu & Baidurya Bhattacharya  

E-Print Network (OSTI)

Fracture resistance of single-walled carbon nanotubes through atomistic simulation Qiang Lu 19716, USA Keywords: Atomistic simulation, carbon nanotube, fracture resistance, strain-energy, brittle-based materials and devices, fracture of CNTs due to mechanical loading becomes an important issue. Presumably

Bhattacharya, Baidurya

165

HYDROGEN STORAGE IN CARBON SINGLE-WALL NANOTUBES A.C. Dillon, K.E.H. Gilbert, P.A. Parilla, J.L. Alleman,  

E-Print Network (OSTI)

HYDROGEN STORAGE IN CARBON SINGLE-WALL NANOTUBES A.C. Dillon, K.E.H. Gilbert, P.A. Parilla, J.L. Alleman, G.L. Hornyak, K.M. Jones, and M.J. Heben National Renewable Energy Laboratory Golden, CO 80401-3393 Abstract Carbon single-wall nanotubes (SWNTs) and other nanostructured carbon materials have attracted

166

Symmetry of single-wall nanotubes  

Science Journals Connector (OSTI)

A review of the symmetry groups of the various single-wall nano- and microtubes considered in the literature (BN, GaN, MS2, C, BC3, BC2N) is presented.

Damnjanovic, M.

2001-04-27T23:59:59.000Z

167

Nonextensive statistical dynamics applied to wall turbulence  

E-Print Network (OSTI)

We apply a formalism of nonextensive statistical mechanics to experimental wall turbulence data, for the first time to our knowledge. Wind tunnel data for velocity differences a streamwise distance $r$ apart are compared to the prediction from theory as developed by Beck. The simplest theory, in which all free parameters are removed, is found to reproduce statistics for the wall-normal velocity component remarkably well, even for $r$ well beyond the corresponding integral scale, while the corresponding description of the streamwise velocity fluctuations is reasonable at separations below the integral scale. A least-squares 2-parameter fit is performed, and the dependence of the optimum parameter values on wall separation and $r$ is analysed. Both parameters are found to be approximately independent of wall-separation in the logarithmic sub-layer.

Simen Ellingsen; Per-ge Krogstad

2014-02-10T23:59:59.000Z

168

Beautify Your Windows and Glass Walls.  

E-Print Network (OSTI)

-utside? How do your dqkrie outside of your house? 2 IlnKY color affect , Coloor, De~kn and Tex When choosing draperies to har- monize with a room, consider the room, proportions, exposure, view, walls, floors, furnishings, accessories...

Tompkins, Charlotte

1961-01-01T23:59:59.000Z

169

In situ Groundwater Remediation Using Treatment Walls  

Science Journals Connector (OSTI)

Development of treatment wall technology for the clean up of contaminated ground-water resources has expanded in the past few...ex situ and other in situ ground-water remediation approaches is reduced operation a...

Radisav D. Vidic; Frederick G. Pohland

2002-01-01T23:59:59.000Z

170

CLIMBING WALL POLICIES Open Bouldering Policies  

E-Print Network (OSTI)

. Climb at your own risk. Supervised Climbing Rules: 1. All climbers must check in at the climbing wall a munter knot and/or a figure eight belay device are not acceptable ways to belay. 11. Shirts and close

171

Axions from cosmic string and wall decay  

SciTech Connect

If inflation occurred with a reheat temperature > T{sub PQ}, axions from the decay of global axion strings and domain walls would make an important contribution to the cosmological energy density, comparable to that from vacuum misalignment. Several groups have numerically studied the evolution of axion strings and walls in the past, however substantial uncertainties remain in their contribution to the present density {Omega}{sub a,string+wall} {approx} 1-100 (f{sub a}/10{sup 12} GeV){sup 7/6}, where f{sub a} is the axion decay constant. I will describe the numerical methods used in our simulations and show results for several string and wall configurations.

Hagmann, C A

2010-03-10T23:59:59.000Z

172

Scintillator material  

DOE Patents (OSTI)

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

Anderson, David F. (Batavia, IL); Kross, Brian J. (Aurora, IL)

1992-01-01T23:59:59.000Z

173

Scintillator material  

DOE Patents (OSTI)

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

Anderson, D.F.; Kross, B.J.

1994-06-07T23:59:59.000Z

174

Scintillator material  

DOE Patents (OSTI)

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography. 4 figs.

Anderson, D.F.; Kross, B.J.

1992-07-28T23:59:59.000Z

175

Scintillator material  

DOE Patents (OSTI)

An improved scintillator material comprising cerium fluoride is disclosed. Cerium fluoride has been found to provide a balance of good stopping power, high light yield and short decay constant that is superior to known scintillator materials such as thallium-doped sodium iodide, barium fluoride and bismuth germanate. As a result, cerium fluoride is favorably suited for use as a scintillator material in positron emission tomography.

Anderson, David F. (Batavia, IL); Kross, Brian J. (Aurora, IL)

1994-01-01T23:59:59.000Z

176

Fusion power: a challenge for materials science  

Science Journals Connector (OSTI)

...schematic representation of a fusion power plant is shown in figure-1...the harshest environments in fusion power plants are those that...broadly classified into three types. The conditions experienced...materials The first wall of a fusion power plant must contain the...

2010-01-01T23:59:59.000Z

177

Domain walls with non-Abelian clouds  

SciTech Connect

Domain walls in U(N) gauge theories, coupled to Higgs scalar fields with degenerate masses, are shown to possess normalizable non-Abelian Nambu-Goldstone (NG) modes, which we call non-Abelian clouds. We construct the moduli space metric and its Kaehler potential of the effective field theory on the domain walls by focusing on two models: a U(1) gauge theory with several charged Higgs fields, and a U(N) gauge theory with 2N Higgs fields in the fundamental representation. We find that non-Abelian clouds spread between two domain walls and that their rotation induces a long-range repulsive force, in contrast to a U(1) mode in models with fully nondegenerate masses which gives a short-range force. We also construct a bound state of dyonic domain walls by introducing the imaginary part of the Higgs masses. In the latter model we find that when all walls coincide, SU(N){sub L}xSU(N){sub R}xU(1) symmetry is broken down to SU(N){sub V}, and U(N){sub A} NG modes and the same number of quasi-NG modes are localized on the wall. When n walls separate, off-diagonal elements of U(n) NG modes have wave functions spreading between two separated walls (non-Abelian clouds), whereas some quasi-NG modes turn to NG bosons as a result of further symmetry breaking U(n){sub V}{yields}U(1){sub V}{sup n}. In the case of 4+1-dimensional bulk, we can dualize the effective theory to the supersymmetric Freedman-Townsend model of non-Abelian 2-form fields.

Eto, Minoru [INFN, Sezione di Pisa, Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Department of Physics, University of Pisa Largo Pontecorvo, 3, Ed. C, 56127 Pisa (Italy); Fujimori, Toshiaki; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Nitta, Muneto [Department of Physics, Keio University, Hiyoshi, Yokohama, Kanagawa 223-8521 (Japan); Ohashi, Keisuke [Department of Applied Mathematics and Theoretical Physics, University of Cambridge, CB3 0WA (United Kingdom)

2008-06-15T23:59:59.000Z

178

Electric and Magnetic Walls on Dielectric Interfaces  

E-Print Network (OSTI)

Sufficient conditions of the existence of electric or magnetic walls on dielectric interfaces are given for a multizone uniform dielectric waveguiding system. If one of two adjacent dielectric zones supports a TEM field distribution while the other supports a TM (TE) field distribution, then the common dielectric interface behaves as an electric (magnetic) wall, that is, the electric (magnetic) field line is perpendicular to the interface while the magnetic (electric) field line is parallel to the interface.

Changbiao Wang

2010-07-20T23:59:59.000Z

179

Advanced Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Advanced Materials Express Licensing Active Terahertz Metamaterial Devices Express Licensing Anion-Conducting Polymer, Composition, And Membrane Express Licensing Analysis Of Macromolecule, Liggands And Macromolecule-Lingand Complexes Express Licensing Carbon Microtubes Express Licensing Chemical Synthesis Of Chiral Conducting Polymers Express Licensing Forming Adherent Coatings Using Plasma Processing Express Licensing Hydrogen Scavengers Express Licensing Laser Welding Of Fused Quartz Express Licensing Multiple Feed Powder Splitter Negotiable Licensing Boron-10 Neutron Detectors for Helium-3 Replacement Negotiable Licensing Insensitive Extrudable Explosive Negotiable Licensing Durable Fuel Cell Membrane Electrode Assembly (MEA) Express Licensing Method of Synthesis of Proton Conducting Materials

180

Critical Materials:  

Office of Environmental Management (EM)

lighting. 14 (bottom) Criticality ratings of shortlisted raw 76 materials. 15 77 2. Technology Assessment and Potential 78 This section reviews the major trends within...

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Standard practice for measuring the ultrasonic velocity in polyethylene tank walls using lateral longitudinal (LCR) waves  

E-Print Network (OSTI)

1.1 This practice covers a procedure for measuring the ultrasonic velocities in the outer wall of polyethylene storage tanks. An angle beam lateral longitudinal (LCR) wave is excited with wedges along a circumferential chord of the tank wall. A digital ultrasonic flaw detector is used with sending-receiving search units in through transmission mode. The observed velocity is temperature corrected and compared to the expected velocity for a new, unexposed sample of material which is the same as the material being evaluated. The difference between the observed and temperature corrected velocities determines the degree of UV exposure of the tank. 1.2 The practice is intended for application to the outer surfaces of the wall of polyethylene tanks. Degradation typically occurs in an outer layer approximately 3.2-mm (0.125-in.) thick. Since the technique does not interrogate the inside wall of the tank, wall thickness is not a consideration other than to be aware of possible guided (Lamb) wave effects or reflection...

American Society for Testing and Materials. Philadelphia

2011-01-01T23:59:59.000Z

182

Modelling of Ion Cyclotron Wall Conditioning plasmas  

SciTech Connect

Ion Cyclotron Wall Conditioning (ICWC) is envisioned in ITER to clean the wall from impurities, to control the wall isotopic ratio and the hydrogen recycling in the presence of the toroidal magnetic field. Various experiments and modelling are advancing to consolidate this technique. In this contribution the modeling of ICWC is presented, which can be divided in two parts: plasma description and plasma wall interaction. Firstly a 0D plasma model, based on a set of energy and particle balance equations for Maxwellian Hydrogen and Helium species, is presented. The model takes into account elementary collision processes, coupled RF power, particle confinement, wall recycling, and active gas injection and pumping. The RF plasma production process is based mainly on electron collisional ionization. The dependency of the plasma parameters, the Hydrogen and Helium partial pressures and neutral or ionic fluxes on pressure and RF power are quantitatively in good agreement with those obtained experimentally on TORE SUPRA. Secondly an extension of the 0D model including the description of the wall interaction is presented and compared to TORE SUPRA multi-pulse ICWC discharges.

Douai, D.; Wauters, T.; Wuenderlich, D.; Bremond, S.; Lombard, G.; Mollard, P.; Pegourie, B. [CEA, IRFM, 13108 St Paul lez Durance (France); Lyssoivan, A. [LPP-ERM/KMS, 1000 Brussels (Belgium); Marchuk, O. [IEK-4, FZ Juelich, 52425 Juelich (Germany); Van Oost, G. [Ghent University, 9000 Ghent (Belgium)

2011-12-23T23:59:59.000Z

183

Measure Guideline: Wall Air Sealing and Insulation Methods in Existing Homes; An Overview of Opportunity and Process  

SciTech Connect

This guide provides renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project. It also outlines the potential project risks, various materials for insulating, possible field inspections needed, installation procedures, as well as the benefits and drawbacks. The purpose of this document is to provide the outline of the overview and process of insulating and air sealing walls so that home retrofit professionals can identify approaches to air sealing and insulation measures.

Roberts, S.; Stephenson, R.

2012-09-01T23:59:59.000Z

184

A Science Service _F?-ature----e.--. Bel.erzsed upon receipt  

E-Print Network (OSTI)

appeared i n brick walls, foundations, plaster, cement walks, etc. As oarly as last July h i s office row

185

FY06 High Strength Weight Reduction Materials Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

HigH StrengtH HigH StrengtH WeigHt reduction MaterialS U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies 1000 Independence Avenue S.W. Washington, DC 20585-0121 FY 2006 Progress Report for High Strength Weight Reduction Materials Energy Efficiency and Renewable Energy Office of FreedomCAR and Vehicle Technologies Advanced Materials Technologies Edward Wall Program Manager, OFCVT Rogelio Sullivan Advanced Materials Technologies Team Leader James Eberhardt Chief Scientist March 2006 High Strength Weight Reduction Materials FY 2006 Progress Report CONTENTS 1. INTRODUCTION................................................................................................................................... 1 2. MATERIALS DEVELOPMENT .......................................................................................................... 3

186

Materials - Home  

NLE Websites -- All DOE Office Websites (Extended Search)

* Coatings & Lubricants * Coatings & Lubricants * Nanofluids * Deformation Joining * Recycling * Catalysts * Assessment * Illinois Center for Advanced Tribology Modeling, Simulation & Software Plug-In Hybrid Electric Vehicles PSAT Smart Grid Student Competitions Technology Analysis Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Materials ring on liner reciprocating tester Tribology Lab: Ring-on-liner reciprocating tester. Argonne National Laboratory plays an important role in the Department of Energy's (DOE's) efforts to develop advanced materials for transportation. The materials are developed with DOE support from the EERE Office of Vehicle Technology and Office of Hydrogen, Fuel Cells, and Infrastructure Technologies in collaboration with worldwide industrial partners. Examples

187

Complex Materials  

SciTech Connect

Valentino Cooper uses some of the world's most powerful computing to understand how materials work at subatomic levels, studying breakthroughs such as piezoelectrics, which convert mechanical stress to electrical energy.

Cooper, Valentino

2014-04-17T23:59:59.000Z

188

Complex Materials  

ScienceCinema (OSTI)

Valentino Cooper uses some of the world's most powerful computing to understand how materials work at subatomic levels, studying breakthroughs such as piezoelectrics, which convert mechanical stress to electrical energy.

Cooper, Valentino

2014-05-23T23:59:59.000Z

189

WallBots: Interactive Wall-Crawling Robots In the Hands of Public Artists and Political Activists  

E-Print Network (OSTI)

WallBots: Interactive Wall-Crawling Robots In the Hands of Public Artists and Political Activists present WallBots- autonomous, wall-crawling robots as a research probe for public expression across a wide, street art INTRODUCTION "People look at an oil painting and admire the use of brushstrokes to convey

Paulos, Eric

190

Materializing Energy  

E-Print Network (OSTI)

Motivated and informed by perspectives on sustainability and design, this paper draws on a diverse body of scholarly works related to energy and materiality to articulate a perspective on energy-as-materiality and propose a design approach of materializing energy. Three critical themes are presented: the intangibility of energy, the undifferentiatedness of energy, and the availability of energy. Each theme is developed through combination of critical investigation and design exploration, including the development and deployment of several novel design artifacts: Energy Mementos and The Local Energy Lamp. A framework for interacting with energy-as-materiality is proposed involving collecting, keeping, sharing, and activating energy. A number of additional concepts are also introduced, such as energy attachment, energy engagement, energy attunement, local energy and energy meta-data. Our work contributes both a broader, more integrative design perspective on energy and materiality as well as a diversity of more specific concepts and artifacts that may be of service to designers and researchers of interactive systems concerned with sustainability and energy. Author Keywords Sustainability, energy, materiality, design, design theory

James Pierce; Eric Paulos

191

Tin-wall hollow ceramic spheres from slurries. Final report  

SciTech Connect

The overall objective of this effort was to develop a process for economically fabricating thin-wall hollow ceramic spheres from conventional ceramic powders using dispersions. This process resulted in successful production of monosized spheres in the mm size range which were point contact bonded into foams. Thin-wall hollow ceramic spheres of small (one to five millimeter) diameter have novel applications as high-temperature insulation and light structural materials when bonded into monolithic foams. During Phase 1 of this program the objective as to develop a process for fabricating thin-wall hollow spheres from powder slurries using the coaxial nozzle fabrication method. Based on the success during Phase 1, Phase 2 was revised to emphasize the assessment of the potential structural and insulation applications for the spheres and modeling of the sphere formation process was initiated. As more understanding developed, it was clear that to achieve successful structural application, the spheres had to be bonded into monolithic foams and the effort was further expanded to include both bonding into structures and finite element mechanical modeling which became the basis of Phase 3. Successful bonding techniques and mechanical modeling resulted but thermal conductivities were higher than desired for insulating activities. In addition, considerable interest had been express by industry for the technology. Thus the final Phase 4 concentrated on methods to reduce thermal conductivity by a variety of techniques and technology transfer through individualized visits. This program resulted in three Ph.D. theses and 10 M.S. theses and they are listed in the appropriate technical sections.

Chapman, A.T.; Cochran, J.K.

1992-12-31T23:59:59.000Z

192

A container for heat treating materials in microwave ovens  

DOE Patents (OSTI)

The efficiency of a microwave oven of a conventional two-source configuration and energy level is increased by providing the oven with a container for housing a refractory material to be treated. The container is formed to top and bottom walls transparent to microwaves while the sidewalls, in a circular configuration, are formed of a nonmetallic material opaque to microwave radiation for reflecting the radiation penetrating the top and bottom walls radially inwardly into the center of the container wherein a casket of heat-insulating material is provided for housing the material to be heat treated. The reflection of the microwave radiation from the sidewalls increases the concentration of the microwaves upon the material being heat treated while the concentration of the microwaves upon the material being heat treated while the casket retains the heat to permit the heating of the material to a substantially higher temperature than achievable in the oven without the container.

Holcombe, C.E.; Dykes, N.L.; Kimrey, H.D. Jr.; Mills, J.E.

1988-01-26T23:59:59.000Z

193

An Integrated, Component-level Approach to Fusion Materials Development  

E-Print Network (OSTI)

1.1 e19 1.5 e 20 Vacuum Vessel 3.4 e11 4.5 e 12 Cryostat 3E+17 3 systems currently used are reactor viable - #12;Challenge of the Fusion Nuclear Environment - Plasma Wall and computational materials science are key tools to accelerate fusion materials development. However, as governing

194

living walls | OpenEI Community  

Open Energy Info (EERE)

14 14 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142229614 Varnish cache server living walls Home Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid Wind

195

Effective action of domain wall networks  

SciTech Connect

U(N{sub C}) gauge theory with N{sub F} fundamental scalars admits BPS junctions of domain walls. When the networks/webs of these walls contain loops, their size moduli give localized massless modes. We construct Kaehler potential of their effective action. In the large size limit Kaehler metric is well approximated by kinetic energy of walls and junctions, which is understood in terms of tropical geometry. Kaehler potential can be expressed in terms of hypergeometric functions that are useful to understand small size behavior. Even when the loop shrinks, the metric is regular with positive curvature. Moduli space of a single triangle loop has a geometry between a cone and a cigar.

Eto, Minoru [Institute of Physics, University of Tokyo, Komaba 3-8-1, Tokyo 153-8902 (Japan); Fujimori, Toshiaki; Nagashima, Takayuki; Ohashi, Keisuke; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Nitta, Muneto [Department of Physics, Keio University, Hiyoshi, Yokohama, Kanagawa 223-8521 (Japan)

2007-02-15T23:59:59.000Z

196

Wall thickness measuring method and apparatus  

DOE Patents (OSTI)

An apparatus for measuring the wall thickness of a nonmagnetic article having a housing supporting a magnet and a contiguous supporting surface. The tubular article and the housing are releasably secured to the supporting surface and a support member of an optical comparator, respectively. To determine the wall thickness of the article at a selected point, a magnetically responsive ball is positioned within the tubular article over said point and retained therein by means of a magnetic field produced by the magnet. Thereafter, an optical comparator is employed to project a magnified image of the ball on a screen and the wall thickness at the selected point is calculated by using a ball surface measurement taken with the comparator in conjunction with a previously determined base line measurement.

Salzer, L.J.; Bergren, D.A.

1987-10-06T23:59:59.000Z

197

Thermodynamics of free Domain Wall fermions  

E-Print Network (OSTI)

Studying various thermodynamic quantities for the free domain wall fermions for both finite and infinite fifth dimensional extent N_5, we find that the lattice corrections are minimum for $N_T\\geq10$ for both energy density and susceptibility, for its irrelevant parameter M in the range 1.45-1.50. The correction terms are, however, quite large for small lattice sizes of $N_T\\leq8$. We propose modifications of the domain wall operator, as well as the overlap operator, to reduce the finite cut-off effects to within 10% of the continuum results of the thermodynamic quantities for the currently used N_T=6-8 lattices. Incorporating chemical potential, we show that \\mu^2 divergences are absent for a large class of such domain wall fermion actions although the chiral symmetry is broken for $\\mu\

R. V. Gavai; Sayantan Sharma

2008-11-19T23:59:59.000Z

198

Living Walls | OpenEI Community  

Open Energy Info (EERE)

Living Walls Living Walls Home > Groups > Buildings Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid Wind Much of the discussion surrounding green buildings centers around reducing energy use. The term net zero is the platinum standard for green buildings, meaning the building in question does not take any more energy from the utility grid than it produces using renewable energy resources, such as solar, wind, or geothermal installations (and sometimes these renewable energy resources actually feed energy back to the utility grid). Architects

199

Continuous growth of single-wall carbon nanotubes using chemical vapor deposition  

DOE Patents (OSTI)

The invention relates to a chemical vapor deposition process for the continuous growth of a carbon single-wall nanotube where a carbon-containing gas composition is contacted with a porous membrane and decomposed in the presence of a catalyst to grow single-wall carbon nanotube material. A pressure differential exists across the porous membrane such that the pressure on one side of the membrane is less than that on the other side of the membrane. The single-wall carbon nanotube growth may occur predominately on the low-pressure side of the membrane or, in a different embodiment of the invention, may occur predominately in between the catalyst and the membrane. The invention also relates to an apparatus used with the carbon vapor deposition process.

Grigorian, Leonid (Raymond, OH); Hornyak, Louis (Evergreen, CO); Dillon, Anne C (Boulder, CO); Heben, Michael J (Denver, CO)

2008-10-07T23:59:59.000Z

200

Pigments with or without organic binder? A survey of wall painting techniques during Antiquity  

SciTech Connect

The identification of ancient artistic techniques is based on laboratory studies and, for historical cases, also on literary sources. An analytical approach using the techniques of physical chemistry reveals the technical expertise of the artists, right at the dawn of art. In the case of prehistoric parietal art, we show that the artists prepared their pigments with different ground and mixed minerals. They applied their material onto the wall and the particles remained embedded in the superficial calcite layer. Later, the prehistoric people prepared a real paint with the proper pigment, an extender and an organic binder to fix the paint on the wall. During Antiquity, new techniques appear. The paint is applied to the natural or artificial wall and is executed, either directly or on a previously applied plaster. The aim of this paper is to describe the evolution of the techniques. The underlying chemistry provides some interesting clues on the technical choices. {copyright} {ital 1996 American Institute of Physics.}

Walter, P. [Laboratoire de Recherche des Musees de France, 6, rue des Pyramides, F-75041 Paris Cedex 01 (France)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Continuous growth of single-wall carbon nanotubes using chemical vapor deposition  

DOE Patents (OSTI)

The invention relates to a chemical vapor deposition process for the continuous growth of a carbon single-wall nanotube where a carbon-containing gas composition is contacted with a porous membrane and decomposed in the presence of a catalyst to grow single-wall carbon nanotube material. A pressure differential exists across the porous membrane such that the pressure on one side of the membrane is less than that on the other side of the membrane. The single-wall carbon nanotube growth may occur predominately on the low-pressure side of the membrane or, in a different embodiment of the invention, may occur predominately in between the catalyst and the membrane. The invention also relates to an apparatus used with the carbon vapor deposition process.

Grigorian, Leonid; Hornyak, Louis; Dillon, Anne C; Heben, Michael J

2014-09-23T23:59:59.000Z

202

Cell Wall Recipe: A Lesson on Biofuels  

K-12 Energy Lesson Plans and Activities Web site (EERE)

Students will investigate how changes in the DNA sequence that codes for cell wall formation can have a favorable outcome in producing plants that have higher levels of cellulose than the parent plant. The cellulose yield is most important in the production of ethanol: the greater the amount of cellulose within the cell wall, the greater the amount of ethanol that can be produced. To engage students, the first part of this lesson has students participating in a discovery activity where they will extract DNA from wheat germ.

203

Shipping container for fissile material  

DOE Patents (OSTI)

The present invention is directed to a shipping container for the interstate transportation of enriched uranium materials. The shipping container is comprised of a rigid, high-strength, cylindrical-shaped outer vessel lined with thermal insulation. Disposed inside the thermal insulation and spaced apart from the inner walls of the outer vessel is a rigid, high-strength, cylindrical inner vessel impervious to liquid and gaseous substances and having the inner surfaces coated with a layer of cadmium to prevent nuclear criticality. The cadmium is, in turn, lined with a protective shield of high-density urethane for corrosion and wear protection. 2 figs.

Crowder, H.E.

1984-12-17T23:59:59.000Z

204

Refractory Materials based on Magnesia-Alumina Spinel for Improved Performance in Coal Gasification Environments  

SciTech Connect

As part of a larger project to develop novel refractory systems and techniques to reduce energy consumption of refractory lined vessels, a team composed of Oak Ridge National Laboratory, refractory manufacturer Minteq International, Inc., and academic partner Missouri University of Science and Technology have developed new refractory materials and coating systems specifically for application in coal gasification environments. Materials were developed under this U.S. DOE funded project to address the need for innovative refractory compositions by developing MgO-Al2O3 spinel gunnable refractory compositions utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques. Work was conducted to develop and deploy these new materials and to develop and apply low cost coatings using a colloidal approach for protection against attack of the refractory brick by the serviced environment. Additionally, a light-weight back-up refractory system was developed to help offset the high thermal conductivity inherent in spinel materials. This paper discusses the efforts involved in the development of these materials, along with the laboratory testing and evaluation of these materials leading to relevant results achieved toward the reduction of chemical reactions and mechanical degradation by the service environment though compositional and processing modifications.

Hemrick, James Gordon [ORNL; Armstrong, Beth L [ORNL; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.; Smith, Jeffrey D [ORNL; O'Hara, Kelley [University of Missouri, Rolla

2013-01-01T23:59:59.000Z

205

Sealed feed-through for a wall in an alkaline battery  

SciTech Connect

The sealed feed-through interconnects two cells of an alkaline storage battery (eg. for an electrically propelled car) by passing through a wall of the battery. The battery includes a monobloc casing of plastic material defining at least two battery cell compartments which are separated by said wall, and said wall has an orifice for receiving the feed-through. The feed-through comprises a first portion for electrical connection to electrodes of a first polarity in a first one of the cells and a second portion for electrical connection to electrodes of opposite polarity in the other cell. In an alkaline battery, conventional welding techniques for making such feed-throughs in lead-acid batteries are not applicable because metals such as nickel steel must be used instead of lead. The resulting welding temperature would destroy the plastic wall. Instead, the first and second portions include interfitting male and female portions suitable for passing through said orifice from opposite sides thereof and for engaging each other in a force fit. Respective skirts surround said interfitting portions and serve to compress at least one deformable sealing member around the orifice. Stops are provided to prevent the wall being crushed when the feed-through portions are forced together.

Bellis, L.; Prokopp, R.

1984-10-30T23:59:59.000Z

206

THE CHINESE WALL LATTICE Ravi Sandhu  

E-Print Network (OSTI)

security policy for confidentiality · Mixture of free choice (discretionary) and mandatory of interest class #12;4 CHINESE WALL EXAMPLE BANKS OIL COMPANIESBANKS OIL COMPANIES A B X Y #12;5 READ ACCESS BREWER-NASH SIMPLE SECURITY S can read O only if · O is in the same company dataset as· O is in the same

Sandhu, Ravi

207

Symmetry groups of single-wall nanotubes  

Science Journals Connector (OSTI)

An approach to the determination of the symmetry groups of structural analogs of single-wall carbon nanotubes using ideas in color symmetry theory is described. The line group structures of the symmetry groups of BN, BC3, BCN and BC2N nanotubes are identified. An extension of the method to address nanotubes with non-hexagonal symmetry is also presented.

De Las Pe?as, M.L.A.N.

2013-11-26T23:59:59.000Z

208

Annual Report Diana H. Wall, Director  

E-Print Network (OSTI)

Student Sustainability Center more than doubled its student engagement, and our pre-college Summer2013-2014 Annual Report #12;Diana H. Wall, Director CSU is at the forefront of sustainability if such systems are to endure, and developing the expertise that is needed to shape a sustainable future

209

Wall Precursor Effects in Gaseous Detonation  

Science Journals Connector (OSTI)

... and 5 mm long, were used in an investigation of electrical phenomena in stoichiometric oxyhydrogen detonations produced in a 4 m long stainless steel tube of hexagonal cross-section. The ... , which was insulated from the tube wall, recorded the time of arrival of the detonation plasma at the plane of observation. Only when both the probes and insulating surfaces ...

M. C. CAVENOR

1970-02-21T23:59:59.000Z

210

Subcooled Boiling Near a Heated Wall  

SciTech Connect

Experimental measurements of void fraction, bubble frequency, and velocity are obtained in subcooled R-134a flowing over a heated flat plate near an unheated wall and compared to analytical predictions. The measurements were obtained for a fixed system pressure and mass flow rate (P = 2.4 MPa and w = 106 kg/hr) at various inlet liquid temperatures. During the experiments, electrical power was applied at a constant rate to one side of the test section. The local void fraction data, acquired with a hot-film anemometer probe, showed the existence of a significant peak near the heated wall and a smaller secondary peak near the unheated wall for the larger inlet subcoolings. Local vapor velocity data, taken with the hot-film probe and a laser Doppler velocimeter, showed broad maxima near the centerline between the heated and unheated plates. Significant temperature gradients near the heated wall were observed for large inlet subcooling. Bubble size data, inferred from measurements of void fraction, bubble frequency and vapor velocity, when combined with the measured bubble chord length distributions illustrate the transition from pure three dimensional spherical to two-dimensional planar bubble flow, the latter being initiated when the bubbles fill the gap between the plates. These various two-phase flow measurements were used for development of a multidimensional, four-field calculational method; comparisons of the data to the calculations show reasonable agreement.

T.A. Trabold; C.C. Maneri; P.F. Vassallo; D.M. Considine

2000-10-27T23:59:59.000Z

211

Design of wetted wall bioaerosol concentration cyclones  

E-Print Network (OSTI)

...................................................................................... 24 Aerosol-to-aerosol collection efficiency.................................................... 24 Wetting pattern on the impacting wall ? effect of an atomizer.................. 24..................................................................................... 67 Figure 3.4. Cold temperature experiemental setup ........................................................... 68 Figure 3.5. Preliminary heating system for the 1250 L/min cyclone and thermo-couple locations...

Seo, Youngjin

2009-05-15T23:59:59.000Z

212

Materials Handbook  

Science Journals Connector (OSTI)

... THE sub title of this handbook gives the clue to the mode of treatment of the subject matter, and so ... seventeen to 'alkalis'; in fact, a better title for the book would be "Handbook of Engineering Materials". British trade names are conspicuously few, but no doubt a ...

E. H. TRIPP

1942-08-15T23:59:59.000Z

213

Container for heat treating materials in microwave ovens  

DOE Patents (OSTI)

The efficiency of a microwave oven of a conventional two-source configuration and energy level is increased by providing the oven with a container for housing a refractory material to be treated. The container is formed of top and bottom walls transparent to microwaves while the sidewalls, in a circular configuration, are formed of a nonmetallic material opaque to microwave radiation reflecting the radiation penetrating the top and bottom walls radially inwardly into the center of the container wherein a casket of heat-insulating material is provided for housing the material to be heat treated. The reflection of the microwave radiation from the sidewalls increases the concentration of the microwaves upon the material being heat treated while the casket retains the heat to permit the heating of the material to a substantially higher temperature than achieveable in the oven without the container.

Holcombe, Cressie E. (Farragut, TN); Dykes, Norman L. (Oak Ridge, TN); Kimrey, Jr., Harold D. (Knoxville, TN); Mills, James E. (Knoxville, TN)

1989-01-01T23:59:59.000Z

214

Improving angular acceptance of stationary low-concentration photovoltaic compound parabolic concentrators using acrylic lens-walled structure  

Science Journals Connector (OSTI)

Low-concentration photovoltaic compound parabolic concentrators (PV-CPC) are a significant addition of solar cell application especially in Building Integrated Photovoltaics because it does not need a tracking system and can be installed in a stationary condition. However higher concentrations correspond with the smaller half acceptance angle which is a limitation but can be improved by a lens-walled structure. In this paper to validate the rationale of this structure a low-concentration PV-CPC using an acrylic lens-walled structure module was designed and fabricated with low-cost materials. The corresponding simulation was also performed with different materials to determine whether the factor that the truncation had a significant effect. The observed outcome implied that the low-concentration PV-CPC using an acrylic lens-walled structure has a larger half acceptance angle than the mirror CPC and that a maximum optical efficiency of more than 80% can be achieved using Schott BK glass as the lens wall material. The lens-walled structure improved the angular acceptance of stationary low-concentration PV-CPC providing a basis for further research.

2014-01-01T23:59:59.000Z

215

Parameter analysis and design framework for magnetic adhesion wall climbing wheeled robot  

Science Journals Connector (OSTI)

Some robots need to climb ferromagnetic walls for performing important inspections and evaluations of the material properties of these walls. This paper aims to establish a design framework for magnetically adhering wheeled robots having magnets attached to the base of the robot. The different design parameters influencing the magnetic adhesion include the geometry of the flux concentrator, the variation of the air gap on adhesion and climbing performance in addition to various types of materials for magnetic flux concentration. These parameters shaping adhesion behaviour are simulated numerically using magnetostatic analysis in ANSYS Finite Elements Method (FEM) software. The results are evaluated and a set of rules and procedures are created as a framework that will enable a more efficient design and construction of this type of robots.

Salman Hussain; Tariq Sattar; Ener Salinas

2012-01-01T23:59:59.000Z

216

Theoretical Analysis of Metamaterial Insertions for Resistive-Wall Beam-Coupling Impedance Reduction  

E-Print Network (OSTI)

Resistive-wall impedance usually constitutes a significant percentage of the total beam-coupling impedance budget of an accelerator. Reduction techniques often entail high electrical-conductivity coatings. This paper investigates the use of negative-permittivity or negative-permeability materials for sensibly reducing or theoretically nearly cancelling resistive-wall impedance. The proposed approach is developed by means of an equivalent transmission-line model. The effectiveness of such materials is discussed both for negative-permittivity and for negative-permeability cases, which actually show different impacts and can be then target of proper engineering. This first-stage study opens the possibility of considering metamaterials for impedance mitigation or for proper experimental setups.

Danisi, A; Masi, A; Losito, R; Salvant, B

2014-01-01T23:59:59.000Z

217

Functional Materials for Energy | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermoelectrics Separations Materials Catalysis Sensor Materials Polymers and Composites Carbon Fiber Related Research Chemistry and Physics at Interfaces Materials Synthesis from...

218

TBU-0061- In the Matter of Misti Wall  

Energy.gov (U.S. Department of Energy (DOE))

Misti Wall (the complainant or Wall), appeals the dismissal of her complaint of retaliation filed under 10 C.F.R. Part 708, the Department of Energy (DOE) Contractor Employee Protection Program. As...

219

Double Diffusion in Enclosure Bounded by Massive and Volatilizing Walls  

E-Print Network (OSTI)

-10), are considered. Other governing parameters are maintained constant (Rayleigh number, Prandtl number, Lewis number and width ratio of massive wall to enclosure). The conjugate heat transfer of the thick wall and indoor airflow and the enhanced heat transfer...

Liu, D.; Tang, G.; Zhao, F.

2006-01-01T23:59:59.000Z

220

Helium Pumping Wall for a Liquid Lithium Tokamak Richard Majeski...  

NLE Websites -- All DOE Office Websites (Extended Search)

Helium Pumping Wall for a Liquid Lithium Tokamak Richard Majeski This invention is designed to be a subsystem of a device, a tokamak with walls or plasma facing components of...

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

After Exodus : re-occupation of the metropolitan wall  

E-Print Network (OSTI)

The title "Exodus alludes to a restricted exclave encircled by a forbidding wall -- effect, a prison on the scale of a metropolis, and one in which people sought refuge voluntarily. Over the past forty years, similar walls ...

Allison, Jordan Lloyd Norman

2012-01-01T23:59:59.000Z

222

Reading the Cosmic Writing on the Wall  

NLE Websites -- All DOE Office Websites (Extended Search)

Reading the Cosmic Reading the Cosmic Writing on the Wall Reading the Cosmic Writing on the Wall NERSC Key to Planck's Revision of Universal Recipe March 21, 2013 Contact: Margie Wylie, mwylie@lbl.gov, + 1 510 486 7421 map800-600.jpg This map shows the oldest light in our universe, as detected with the greatest precision yet by the Planck mission. The ancient light, called the cosmic microwave background, was imprinted on the sky when the universe was 370,000 years old. (Image credit: ESA and the Planck Collaboration) Thanks to a supersensitive space telescope and some sophisticated supercomputing, scientists from the international Planck collaboration have made the closest reading yet of the most ancient story in our universe: the cosmic microwave background (CMB). Today, the team released preliminary results based on the Planck

223

Gravitational infall in the hard wall model  

E-Print Network (OSTI)

An infalling shell in the hard wall model provides a simple holographic model for energy injection in a confining gauge theory. Depending on its parameters, a scalar shell either collapses into a large black brane, or scatters between the hard wall and the anti-de Sitter boundary. In the scattering regime, we find numerical solutions that keep oscillating for as long as we have followed their evolution, and we provide an analytic argument that shows that a black brane can never be formed. This provides examples of states in infinite-volume field theory that never thermalize. We find that the field theory expectation value of a scalar operator keeps oscillating, with an amplitude that undergoes modulation.

B. Craps; E. J. Lindgren; A. Taliotis; J. Vanhoof; H. Zhang

2014-12-15T23:59:59.000Z

224

Enhanced dielectric-wall linear accelerator  

DOE Patents (OSTI)

A dielectric-wall linear accelerator is enhanced by a high-voltage, fast e-time switch that includes a pair of electrodes between which are laminated alternating layers of isolated conductors and insulators. A high voltage is placed between the electrodes sufficient to stress the voltage breakdown of the insulator on command. A light trigger, such as a laser, is focused along at least one line along the edge surface of the laminated alternating layers of isolated conductors and insulators extending between the electrodes. The laser is energized to initiate a surface breakdown by a fluence of photons, thus causing the electrical switch to close very promptly. Such insulators and lasers are incorporated in a dielectric wall linear accelerator with Blumlein modules, and phasing is controlled by adjusting the length of fiber optic cables that carry the laser light to the insulator surface. 6 figs.

Sampayan, S.E.; Caporaso, G.J.; Kirbie, H.C.

1998-09-22T23:59:59.000Z

225

Wall, Pennsylvania: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Wall, Pennsylvania: Energy Resources Wall, Pennsylvania: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 40.3936801°, -79.7861577° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.3936801,"lon":-79.7861577,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

226

Manipulation and Imaging of Individual Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

Manipulation and Imaging of Individual Single-Walled Carbon Nanotubes with an Atomic Force Microscope** By Henk W. C. Postma, Allard Sellmeijer, and Cees Dekker* Carbon nanotubes[1] have attracted-walled nanotubes,[3±5] the prototype single-walled tubes are much more difficult to study since their diameter

227

Proposal on Lithium Wall Experiment (LWX) on PBXM 1  

E-Print Network (OSTI)

Proposal on Lithium Wall Experiment (LWX) on PBX­M 1 Leonid E. Zakharov, Princeton University; OUTLINE 1. Mini­conference on Lithium walls and low recycling regime. 2. PBX­M Capabilities. 3. Motivation "Lithium covered walls and low recycling regimes in toka­ maks". APS meeting, October 23­27, 2000, Quebec

Zakharov, Leonid E.

228

Particle Sizing using Passive Ultrasonic Measurement of Vessel Wall Vibrations  

E-Print Network (OSTI)

Particle Sizing using Passive Ultrasonic Measurement of Vessel Wall Vibrations Gillian Carson for particle sizing using an ultrasonic transducer to measure vessel wall vibrations and 1 #12;considers in a stirred vessel, its subse- quent impact with the vessel wall, and the resulting flexural vibrations

Mottram, Nigel

229

Functional Materials for Energy | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Fuel Cells Thermoelectrics Separations Materials Catalysis Sensor Materials Polymers and Composites Carbon Fiber Related Research Chemistry and Physics at Interfaces Materials Synthesis from Atoms to Systems Materials Characterization Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science & Discovery | Advanced Materials | Research Areas | Functional Materials for Energy SHARE Functional Materials for Energy The concept of functional materials for energy occupies a very prominent position in ORNL's research and more broadly the scientific research sponsored by DOE's Basic Energy Sciences. These materials facilitate the capture and transformation of energy, the storage of energy or the efficient release and utilization of stored energy. A different kind of

230

Conserved currents for Mobius Domain Wall Fermions  

E-Print Network (OSTI)

We derive the exactly conserved vector, and almost conserved axial currents for rational approximations to the overlap operator with a general Mobius kernel. The approach maintains manifest Hermiticity, and allows matrix elements of the currents to be constructed at no extra cost after solution of the usual 5d system of equations, similar to the original approach of Furman and Shamir for domain wall Fermions.

P. A. Boyle

2014-11-20T23:59:59.000Z

231

1993 NEC 1) (Single-Walled Carbon  

E-Print Network (OSTI)

MWNT (Vapor-grown carbon fiber, VGCF)33) 10001300 34) SWNT CCVD Smalley 15) CO SWNT SWNT 1993 NEC 1) (Single-Walled Carbon Nanotubes, SWNTs) 1(a) 1nm µm µm SWNTs 2) (MWNTs) 1(c 29,30,35-41) SWNT , MgO Fe/Co, Ni/Co, Mo/Co nm SWNT VGCF Fe(CO)5 SWNT Ethanol tank Hot

Maruyama, Shigeo

232

SAVANNAH RIVER SITE TANK 18 AND TANK 19 WALL SAMPLER PERFORMANCE  

SciTech Connect

A sampling tool was required to evaluate residual activity ({mu}Curies per square foot) on the inner wall surfaces of underground nuclear waste storage tanks. The tool was required to collect a small sample from the 3/8 inch thick tank walls. This paper documents the design, testing, and deployment of the remotely operated sampling device. The sampler provides material from a known surface area to estimate the overall surface contamination in the tank prior to closure. The sampler consisted of a sampler and mast assembly mast assembly, control system, and the sampler, or end effector, which is defined as the operating component of a robotic arm. The mast assembly consisted of a vertical 30 feet long, 3 inch by 3 inch, vertical steel mast and a cantilevered arm hinged at the bottom of the mast and lowered by cable to align the attached sampler to the wall. The sampler and mast assembly were raised and lowered through an opening in the tank tops, called a riser. The sampler is constructed of a mounting plate, a drill, springs to provide a drive force to the drill, a removable sampler head to collect the sample, a vacuum pump to draw the sample from the drill to a filter, and controls to operate the system. Once the sampler was positioned near the wall, electromagnets attached it to the wall, and the control system was operated to turn on the drill and vacuum to remove and collect a sample from the wall. Samples were collected on filters in removable sampler heads, which were readily transported for further laboratory testing.

Leishear, R.; Thaxton, D.; Minichan, R.; France, T.; Steeper, T.; Corbett, J.; Martin, B.; Vetsch, B.

2009-12-19T23:59:59.000Z

233

Phenomenology of Wall Bounded Newtonian Turbulence  

E-Print Network (OSTI)

We construct a simple analytic model for wall-bounded turbulence, containing only four adjustable parameters. Two of these parameters characterize the viscous dissipation of the components of the Reynolds stress-tensor and other two parameters characterize their nonlinear relaxation. The model offers an analytic description of the profiles of the mean velocity and the correlation functions of velocity fluctuations in the entire boundary region, from the viscous sub-layer, through the buffer layer and further into the log-layer. As a first approximation, we employ the traditional return-to-isotropy hypothesis, which yields a very simple distribution of the turbulent kinetic energy between the velocity components in the log-layer: the streamwise component contains a half of the total energy whereas the wall-normal and the cross-stream components contain a quarter each. In addition, the model predicts a very simple relation between the von-K\\'arm\\'an slope $\\kappa $ and the turbulent velocity in the log-law region $v^+$ (in wall units): $v^+=6 \\kappa$. These predictions are in excellent agreement with DNS data and with recent laboratory experiments.

Victor S. L'vov; Anna Pomyalov; Itamar Procaccia; Sergej S. Zilitinkevich

2005-06-28T23:59:59.000Z

234

FY2003 Progress Report for Automotive Propulsion Materials Program  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR and Vehicle Technologies FreedomCAR and Vehicle Technologies 1000 Independence Avenue S.W. Washington, DC 20585-0121 FY 2003 Progress Report for Automotive Propulsion Materials Program Energy Efficiency and Renewable Energy Office of FreedomCAR and Vehicle Technologies Edward Wall Program Manager December 2003 U.S. Department of Energy Office of FreedomCAR and Vehicle Technologies 1000 Independence Avenue S.W. Washington, DC 20585-0121 FY 2003 Progress Report for Automotive Propulsion Materials Program Energy Efficiency and Renewable Energy Office of FreedomCAR and Vehicle Technologies Edward Wall Program Manager December 2003 CONTENTS 1. INTRODUCTION ........................................................................................................... 1

235

12 - Life cycle assessment (LCA) of building thermal insulation materials  

Science Journals Connector (OSTI)

Abstract: In this chapter thermal insulation materials and types of plaster and their properties are described. The impact of the selected thermal insulation materials and plaster on the environment is assessed using LCA analysis. A method of assessing the ecological and economic benefits resulting from thermal insulation of the external walls of buildings is proposed. On this basis, ecological and economic payback periods for thermal insulation are defined as well as the ecological efficiency of thermal insulation. The conducted analyses conclude that thermal insulation of the external walls of buildings is environmentally favourable.

R. Dylewski; J. Adamczyk

2014-01-01T23:59:59.000Z

236

Theoretical study on interaction of hydrogen with single-walled boron nitride nanotubes. II. Collision, storage, and adsorption  

E-Print Network (OSTI)

of a true hydrogen storage capacity, thus it would be also true that some results of rather high storage storage material or not. Our previous study6 showed that the pristine CNT is not an effective hydrogenTheoretical study on interaction of hydrogen with single-walled boron nitride nanotubes. II

Goddard III, William A.

237

Materials Under Extremes | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Home | Science & Discovery | Advanced Materials | Research Areas | Materials Under Extremes SHARE Materials Under Extremes Materials that can withstand extreme conditions such...

238

Fluorescent Single-Walled Carbon Nanotube Aerogels in Surfactant-free Environments  

Science Journals Connector (OSTI)

Physical Chemistry and Applied Spectroscopy Group, Chemistry Division, Center for Integrated Nanotechnologies, Materials Physics and Applications Division, Polymers and Coatings Group, Materials Science and Technology Division, and ?National High Magnetic Field Laboratory, Los Alamos National Laboratory, Los Alamos New Mexico 87545, United States ... single-walled carbon nanotube; fluorescence; surfactant-free; silica aerogel; nanocomposite; low-temperature ... Thus, during gelation the silica precursor molecules can penetrate the SDS assembly more readily than the DOC coating resulting in weaker PL intensities for the SDS-suspended tubes in contrast to DOC-wrapped tubes. ...

Juan G. Duque; Christopher E. Hamilton; Gautam Gupta; Scott A. Crooker; Jared. J. Crochet; Aditya Mohite; Han Htoon; Kimberly A. DeFriend Obrey; Andrew M. Dattelbaum; Stephen K. Doorn

2011-07-26T23:59:59.000Z

239

Photovoltaic Materials  

SciTech Connect

The goal of the current project was to help make the US solar industry a world leader in the manufacture of thin film photovoltaics. The overall approach was to leverage ORNLs unique characterization and processing technologies to gain a better understanding of the fundamental challenges for solar cell processing and apply that knowledge to targeted projects with industry members. ORNL has the capabilities in place and the expertise required to understand how basic material properties including defects, impurities, and grain boundaries affect the solar cell performance. ORNL also has unique processing capabilities to optimize the manufacturing process for fabrication of high efficiency and low cost solar cells. ORNL recently established the Center for Advanced Thin-film Systems (CATS), which contains a suite of optical and electrical characterization equipment specifically focused on solar cell research. Under this project, ORNL made these facilities available to industrial partners who were interested in pursuing collaborative research toward the improvement of their product or manufacturing process. Four specific projects were pursued with industrial partners: Global Solar Energy is a solar industry leader in full scale production manufacturing highly-efficient Copper Indium Gallium diSelenide (CIGS) thin film solar material, cells and products. ORNL worked with GSE to develop a scalable, non-vacuum, solution technique to deposit amorphous or nanocrystalline conducting barrier layers on untextured stainless steel substrates for fabricating high efficiency flexible CIGS PV. Ferro Corporations Electronic, Color and Glass Materials (ECGM) business unit is currently the worlds largest supplier of metallic contact materials in the crystalline solar cell marketplace. Ferros ECGM business unit has been the world's leading supplier of thick film metal pastes to the crystalline silicon PV industry for more than 30 years, and has had operational cells and modules in the field for 25 years. Under this project, Ferro leveraged world leading analytical capabilities at ORNL to characterize the paste-to-silicon interface microstructure and develop high efficiency next generation contact pastes. Ampulse Corporation is developing a revolutionary crystalline-silicon (c-Si) thin-film solar photovoltaic (PV) technology. Utilizing uniquely-textured substrates and buffer materials from the Oak Ridge National Laboratory (ORNL), and breakthroughs in Hot-Wire Chemical Vapor Deposition (HW-CVD) techniques in epitaxial silicon developed at the National Renewable Energy Laboratory (NREL), Ampulse is creating a solar technology that is tunable in silicon thickness, and hence in efficiency and economics, to meet the specific requirements of multiple solar PV applications. This project focused on the development of a high rate deposition process to deposit Si, Ge, and Si1-xGex films as an alternate to hot-wire CVD. Mossey Creek Solar is a start-up company with great expertise in the solar field. The primary interest is to create and preserve jobs in the solar sector by developing high-yield, low-cost, high-efficiency solar cells using MSC-patented and -proprietary technologies. The specific goal of this project was to produce large grain formation in thin, net-shape-thickness mc-Si wafers processed with high-purity silicon powder and ORNL's plasma arc lamp melting without introducing impurities that compromise absorption coefficient and carrier lifetime. As part of this project, ORNL also added specific pieces of equipment to enhance our ability to provide unique insight for the solar industry. These capabilities include a moisture barrier measurement system, a combined physical vapor deposition and sputtering system dedicated to cadmium-containing deposits, adeep level transient spectroscopy system useful for identifying defects, an integrating sphere photoluminescence system, and a high-speed ink jet printing system. These tools were combined with others to study the effect of defects on the performance of crystalline silicon and

Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A.

2012-10-15T23:59:59.000Z

240

Effect of elasticity of wall on diffusion in nano channel  

SciTech Connect

Confining walls of nano channel are taken to be elastic to study their effect on the diffusion coefficient of fluid flowing through the channel. The wall is elastic to the extent that it responses to molecular pressure exerted by fluid. The model to study diffusion is based on microscopic considerations. Results obtained for fluid confining to 20 atomic diameter width contrasted with results obtained by considering rigid and smooth wall. The effect of roughness of wall on diffusion can be compensated by the elastic property of wall.

Tankeshwar, K., E-mail: tankesh@pu.ac.in [Computer Centre, Panjab University Chandigarh,- 160014 (India); Srivastava, Sunita [Department of Physics, Panjab University, Chandigarh 160014 (India)

2014-04-24T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Influence of heat-treatment on lithium ion anode properties of mesoporous carbons with nanosheet-like walls  

SciTech Connect

Highlights: ? Mesoporous carbons possess unique nanosheet-like pore walls which can be changed by heat treatment. ? Lithium ion anode properties of mesoporous carbons could be influenced by the nanosheet-like walls. ? Mesoporous carbons with nanosheet-like walls exhibit enhanced electrochemical properties LIBs. -- Abstract: Mesoporous carbons (MCs) with nanosheet-like walls have been prepared as electrodes for lithium-ion batteries by a simple one-step infiltrating method under the action of capillary flow. The influence of heat treatment temperature on the surface topography, pore/phase structure and anode performances of as-prepared materials has been investigated. The results reveal that melted liquid-crystal polycyclic aromatic hydrocarbons could be anchored on liquid/silica interfaces by molecule engineering. After carbonization, the nanosheets are formed as the pore walls of MCs and are perpendicular to the long axis of pores. The anode properties demonstrate that C-1200 displays higher reversible capacitance than those treated in higher temperature. The rate performances of C-1200 and C-1800 are similar and more excellent than that of C-2400. These improved lithium ion anode properties could be attributed to the nanosheet-like walls of MCs which can be influenced by the heat treatment temperature.

Zeng, Fanyan [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China)] [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); Hou, Zhaohui, E-mail: zhqh96@163.com [College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China)] [College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China); He, Binhong [College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China)] [College of Chemistry and Chemical Engineering, Hunan Institute of Science and Technology, Yueyang 414006 (China); Ge, Chongyong; Cao, Jianguo [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China)] [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China); Kuang, Yafei, E-mail: yafeik@163.com [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China)] [College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082 (China)

2012-08-15T23:59:59.000Z

242

Radiation levels on empty cylinders containing heel material  

SciTech Connect

Empty UF{sub 6} cylinders containing heel material were found to emit radiation levels in excess of 200 mr/hr, the maximum amount stated in ORO-651. The radiation levels were as high as 335 mr/hr for thick wall (48X and 48Y) cylinders and 1050 mr/hr for thin wall (48G and 48H) cylinders. The high readings were found only on the bottom of the cylinders. These radiation levels exceeded the maximum levels established in DOT 49 CFR, Part 173.441 for shipment of cylinders. Holding periods of four weeks for thick-wall cylinders and ten weeks for thin-wall cylinders were established to allow the radiation levels to decay prior to shipment.

Shockley, C.W. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

1991-12-31T23:59:59.000Z

243

Method of non-destructively inspecting a curved wall portion  

DOE Patents (OSTI)

A method of non-destructively inspecting a curved wall portion of a large and thick walled vessel for a defect by computed tomography is provided. A collimated source of radiation is placed adjacent one side of the wall portion and an array of detectors for the radiation is placed on the other side adjacent the source. The radiation from the source passing through the wall portion is then detected with the detectors over a limited angle, dependent upon the curvature of the wall of the vessel, to obtain a dataset. The source and array are then coordinately moved relative to the wall portion in steps and a further dataset is obtained at each step. The plurality of datasets obtained over the limited angle is then processed to produce a tomogram of the wall portion to determine the presence of a defect therein. In a preferred embodiment, the curved wall portion has a center of curvature so that the source and the array are positioned at each step along a respective arc curved about the center. If desired, the detector array and source can be reoriented relative to a new wall portion and an inspection of the new wall portion can be easily obtained. Further, the source and detector array can be indexed in a direction perpendicular to a plane including the limited angle in a plurality of steps so that by repeating the detecting and moving steps at each index step, a three dimensional image can be created of the wall portion.

Fong, James T. (Bethel Park, PA)

1996-01-01T23:59:59.000Z

244

Highly Energy Efficient Wall Systems Research Project | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Highly Energy Efficient Wall Systems Highly Energy Efficient Wall Systems Research Project Highly Energy Efficient Wall Systems Research Project The Department of Energy is currently conducting research into highly energy efficient wall systems. Walls with high R-values are better insulators, and their development can help buildings come closer to having zero net energy consumption. Project Description This project seeks to develop a commercially viable wall system up to R-40 through integration of vacuum technology with the exterior insulated façade system (EIFS). Dow Corning will develop a wall system configuration of expanded polystyrene vacuum isolation panels that can be specified for R-values of 20, 30, and 40. This project also aims to develop a unitized protection system of vacuum isolation panels and to validate current code

245

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning Stochastic Domain-Wall Depinning in Magnetic Nanowires Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Wednesday, 29 July 2009 00:00 Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

246

Domain Walls and Vortices in Chiral Symmetry Breaking  

E-Print Network (OSTI)

We study domain walls and vortices in chiral symmetry breaking in a QCD-like theory with N flavors in the chiral limit. If the axial anomaly is absent, there exist stable Abelian axial vortices winding around the spontaneously broken U(1)_A symmetry and non-Abelian axial vortices winding around both the U(1)_A and non-Abelian SU(N) chiral symmetries. In the presence of the axial anomaly term, metastable domain walls are present and Abelian axial vortices must be attached by N domain walls, forming domain wall junctions. We show that a domain wall junction decays into N non-Abelian vortices attached by domain walls, implying its metastability. We also show that domain walls decay through the quantum tunneling by creating a hole bounded by a closed non-Abelian vortex.

Minoru Eto; Yuji Hirono; Muneto Nitta

2013-09-18T23:59:59.000Z

247

Moisture Management of High-R Walls (Fact Sheet), Building America...  

Energy Savers (EERE)

wall with ccSPF cavity insulation Double stud wall with cellulose insulation and polyethylene vapor retarder Double stud wall with cellulose and 2 in. of ccSPF Double stud wall...

248

Critical Materials Workshop  

Energy.gov (U.S. Department of Energy (DOE))

Presentations during the Critical Materials Workshop held on April 3, 2012 overviewing critical materials strategies

249

Detonation limits in rough walled tubes  

Science Journals Connector (OSTI)

Abstract The present paper reports the results of a study of detonation limits in rough tubes. Detonation velocity is measured by photodiodes and ionization probes spaced at 10cm intervals along the length of the tube. Short lengths of smoked foils inserted into the core of the rough tube is used to register the structure of the detonation wave. Pressure transducers are also used to obtain the pressure profile. The results indicate that in rough tubes, the detonation velocity is generally much lower than the corresponding values for smooth tubes. The velocity decreases slowly at first and then more rapidly as the limit is approached. The velocity variation is generally continuous and at the limits, the failure velocity is of the order of about 0.4 V CJ for all cases. The detonation limits in rough tubes are found to be wider than for a smooth tube. This indicates that the turbulence generated by the wall roughness facilitates the propagation of the detonation and extends the limits. Smoked foil records show that in the core of the rough tube the detonation front has a cellular structure corresponding to the usual cellular structure due to instability of the detonation. Thus the intrinsic unstable cellular structure is quite robust and retains its global characteristics in spite of the large perturbations generated by the rough wall. The detonation in the core of the rough tube goes from multi-headed to single headed as the limit is approached. Past the single headed spin, the low velocity detonation has no cellular structure but consists of interacting weak transverse waves from the rough wall. The averaged pressure of the low velocity detonation front corresponds to about the constant volume explosion pressure, in accord with the velocity of the low velocity detonation.

Amanda Starr; John H.S. Lee; Hoi Dick Ng

2014-01-01T23:59:59.000Z

250

Critical Materials Institute  

ScienceCinema (OSTI)

Ames Laboratory Director Alex King talks about the goals of the Critical Materials Institute in diversifying the supply of critical materials, developing substitute materials, developing tools and techniques for recycling critical materials, and forecasting materials needs to avoid future shortages.

Alex King

2013-06-05T23:59:59.000Z

251

Melting Instantons, Domain Walls, and Large N  

E-Print Network (OSTI)

Monte Carlo studies of $CP^{N-1}$ sigma models have shown that the structure of topological charge in these models undergoes a sharp transition at $N=N_c\\approx 4$. For $NN_c$ it is dominated by extended, thin, 1-dimensionally coherent membranes of topological charge, which can be interpreted as domain walls between discrete quasi-stable vacua. These vacua differ by a unit of background electric flux. The transition can be identified as the delocalization of topological charge, or "instanton melting," a phenomenon first suggested by Witten to resolve the conflict between instantons and large $N$ behavior. Implications for $QCD$ are discussed.

H. B. Thacker

2008-10-22T23:59:59.000Z

252

Gas turbine bucket wall thickness control  

DOE Patents (OSTI)

A core for use in casting a turbine bucket including serpentine cooling passages is divided into two pieces including a leading edge core section and a trailing edge core section. Wall thicknesses at the leading edge and the trailing edge of the turbine bucket can be controlled independent of each other by separately positioning the leading edge core section and the trailing edge core section in the casting die. The controlled leading and trailing edge thicknesses can thus be optimized for efficient cooling, resulting in more efficient turbine operation.

Stathopoulos, Dimitrios (Glenmont, NY); Xu, Liming (Greenville, SC); Lewis, Doyle C. (Greer, SC)

2002-01-01T23:59:59.000Z

253

2007 Propulsion Materials Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle t echnologies Progra M Less dependence on foreign oil today, and transition to a petroleum-free, emissions-free vehicle tomorrow. 2 0 0 7 a n n u a l p r o g r e s s r e p o r t U.S. Department of Energy Office of Vehicle Technologies 1000 Independence Avenue S.W. Washington, DC 20585-0121 FY 2007 Progress Report for Propulsion Materials Energy Efficiency and Renewable Energy Office of Vehicle Technologies Advanced Materials Technologies Edward J. Wall Program Manager, OVT Rogelio A. Sullivan Advanced Materials Technologies Team Leader Jerry L. Gibbs Technology Manager January 2008 CONTENTS INTRODUCTION..................................................................................................................................... 1 PROJECT 18518 - MATERIALS FOR HIGH EFFICIENCY ENGINES......................................... 9

254

Flame-wall interaction simulation in a turbulent channel flow  

SciTech Connect

The interaction between turbulent premixed flames and channel walls is studied. Combustion is represented by a simple irreversible reaction with a large activation temperature. A low heat release assumption is used, but feedback to the flowfield can be allowed through viscosity changes. The effect of wall distance on local and global flame structure is investigated. Quenching distances and maximum wall heat fluxed computed in laminar cases are compared to DNS results. It is found that quenching distances decrease and maximum heat fluxes increase relative to laminar flame values, scaling with the turbulent strain rate. It is shown that these effects are due to large coherent structures which push flame elements towards the wall. The effect of wall strain in flame-wall interaction is studied in a stagnation line flow; this is used to explain the DNS results. The effects of the flame on the flow through viscosity changes is studied. It is also shown that remarkable flame events are produced by flame interaction with a horseshoe vortex: burned gases are pushed towards the wall at high speed and induce quenching and high wall heat flux while fresh gases are expelled from the wall region and form finger-like structures. Effects of the wall on flame surface density are investigated.

Bruneaux, G.; Akselvoll, K.; Poinsot, T.; Ferziger, J.H.

1996-10-01T23:59:59.000Z

255

Chem. Phys. Lett. in press Cold wall CVD generation of single-walled carbon nanotubes  

E-Print Network (OSTI)

-furnace [3] and arc-discharge [4] methods, several techniques employing the CVD approach [5-13] have been Catalytic CVD generation of high-purity single-walled carbon nanotubes (SWNTs) without use of an electric without resort to an electric furnace or a hot filament is proposed. All one needs is a vacuum chamber

Maruyama, Shigeo

256

Nuclear Rocket Test Facility Decommissioning Including Controlled Explosive Demolition of a Neutron-Activated Shield Wall  

SciTech Connect

Located in Area 25 of the Nevada Test Site, the Test Cell A Facility was used in the 1960s for the testing of nuclear rocket engines, as part of the Nuclear Rocket Development Program. The facility was decontaminated and decommissioned (D&D) in 2005 using the Streamlined Approach For Environmental Restoration (SAFER) process, under the Federal Facilities Agreement and Consent Order (FFACO). Utilities and process piping were verified void of contents, hazardous materials were removed, concrete with removable contamination decontaminated, large sections mechanically demolished, and the remaining five-foot, five-inch thick radiologically-activated reinforced concrete shield wall demolished using open-air controlled explosive demolition (CED). CED of the shield wall was closely monitored and resulted in no radiological exposure or atmospheric release.

Michael Kruzic

2007-09-01T23:59:59.000Z

257

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

258

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

259

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

260

Webs of domain walls in supersymmetric gauge theories  

SciTech Connect

Webs of domain walls are constructed as 1/4 Bogomol'nyi-Prasad-Sommerfield (BPS) states in d=4, N=2 supersymmetric U(N{sub C}) gauge theories with N{sub F} hypermultiplets in the fundamental representation. Webs of walls can contain any numbers of external legs and loops like (p,q) string/5-brane webs. We find the moduli space M of a 1/4 BPS equation for wall webs to be the complex Grassmann manifold. When moduli spaces of 1/2 BPS states (parallel walls) and the vacua are removed from M, the noncompact moduli space of genuine 1/4 BPS wall webs is obtained. All the solutions are obtained explicitly and exactly in the strong gauge coupling limit. In the case of Abelian gauge theory, we work out the correspondence between configurations of wall web and the moduli space CP{sup N{}sub F}{sup -1}.

Eto, Minoru; Isozumi, Youichi; Nitta, Muneto; Ohashi, Keisuke; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan)

2005-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

En-Vac Robotic Wall Scabbler. Innovative Technology Summary Report  

SciTech Connect

The Idaho National Engineering and Environmental Laboratory (INEEL)demonstrated an En-Vac Robotic Wall Scabbler from Japan to remove contaminated paint and concrete up to five times faster than workers using a hand-held scabbling/grinding tool. The Robotic Wall Scabbler uses abrasive steel grit to blast metal and concrete surfaces and it moves along the wall and adheres to the surface using vacuum suction. The Robotic Wall Scabbling unit includes the robot, grit recycling unit, debris filtration system, vacuum system, and remote control station. It scabbles concrete at depths up to 1/8-inch per pass. The demonstration was conducted on the walls of the Decontamination Shop of Test Area North which is contaminated with polychlorobiphenyls, lead, and radionuclides. Besides production rate, other benefits of the robotic wall scabbler include reduced radiation dose to workers and no airborne contamination.

None

2001-04-01T23:59:59.000Z

262

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

263

Stochastic Domain-Wall Depinning in Magnetic Nanowires  

NLE Websites -- All DOE Office Websites (Extended Search)

Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Stochastic Domain-Wall Depinning in Magnetic Nanowires Print Reliably controlling the motion of magnetic domain walls along magnetic nanowires is a key requirement for current technological development of novel classes of logic and storage devices, but understanding the nature of non-deterministic domain-wall motion remains a scientific challenge. A statistical analysis of high-resolution magnetic soft x-ray microscopy images by a Berkeley Lab-University of Hamburg group has now revealed that the stochastic behavior of the domain-wall depinning field in notch-patterned Ni80Fe20 (permalloy) nanowires depends strongly on the wire width and the notch depth. This result both provides valuable insight into the motion of magnetic-domain walls and opens a path to further technological developments in spintronics applications.

264

Steam reforming of methane using double-walled reformer tubes containing high-temperature thermal storage Na2CO3/MgO composites for solar fuel production  

Science Journals Connector (OSTI)

Abstract Double-walled reactor tubes containing thermal storage materials based on the molten carbonate salts100wt% Na2CO3 molten salt, 90wt% Na2CO3/10wt% MgO and 80wt% Na2CO3/20wt% MgO composite materialswere studied for the performances of the reactor during the heat charging mode, while those of methane reforming with steam during heat discharging mode for solar steam reforming. The variations in the temperatures of the catalyst and storage material, methane conversion, duration of reforming for obtaining high levels of methane conversion (>90%), higher heating value (HHV) power of reformed gas and efficiency of the reactor tubes were evaluated for the double-walled reactor tubes and a single-wall reactor tube without the thermal storage. The results for the heat charging mode indicated that the composite thermal storage could successfully store the heat transferred from the exterior wall of the reactor in comparison to the pure molten-salt. The double-walled reactor tubes with the 90wt% Na2CO3/10wt% MgO composite material was the most desirable for steam reforming of methane to realize large HHV amounts of reformed gas and higher efficiencies during heat-discharging mode.

Nobuyuki Gokon; Shohei Nakamura; Tsuyoshi Hatamachi; Tatsuya Kodama

2014-01-01T23:59:59.000Z

265

D-brane Configurations for Domain Walls and Their Webs  

SciTech Connect

Supersymmetric U(NC) gauge theory with NF massive hypermultiplets in the fundamental representation admits various BPS solitons like domain walls and their webs. In the first part we show as a review of the previous paper that domain walls are realized as kinky fractional D3-branes interpolating between separated D7-branes. In the second part we discuss brane configurations for domain wall webs. This is a contribution to the conference based on the talk given by MN.

Eto, Minoru; Isozumi, Youichi; Nitta, Muneto; Ohashi, Keisuke; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Ohta, Kazutoshi [Theoretical Physics Laboratory, Institute of Physical and Chemical Research (RIKEN), 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan)

2005-12-02T23:59:59.000Z

266

Multi Material Paradigm  

Energy Savers (EERE)

Multi Material Paradigm Glenn S. Daehn Department of Materials Science and Engineering, The Ohio State University Advanced Composites (FRP) Steel Spaceframe Multi Material Concept...

267

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network (OSTI)

scale synthesis of carbon nanotubes." Nature, Vol.358, 220-Ropes of Metallic Carbon Nanotubes." Science, Vol.273(5274),of single- wall carbon nanotubes. Process, product, and

Gao, Yan

2011-01-01T23:59:59.000Z

268

Stud Walls With Continuous Exterior Insulation for Factory Built...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

density, fairly simple window and door framing details can be used. Easily installed plastic sill flashing is an added benefit. STUD WALLS WITH FOAM- CONTROL NAILBRACE AFM's...

269

Concept for Reducing Hall Thruster Chamber Wall Erosion with...  

NLE Websites -- All DOE Office Websites (Extended Search)

Concept for Reducing Hall Thruster Chamber Wall Erosion with Lithium Vapor Shielding. Hall thrusters have been established as a compact and reliable means for satellite...

270

Security Walls, LLC, January 14-18, 2013  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assistance Washington, DC 20585 Security Walls, LLC DOE-VPP Onsite Review January 2013 Foreword The Department of Energy (DOE) recognizes that true excellence can be...

271

Imaging cell wall architecture in single Zinnia elegans tracheary elements  

E-Print Network (OSTI)

indicated a loss of lignin and a modest loss of otherTEs accumulate lignin in their secondary walls and undergohemicelluloses, and also lignin, a complex aromatic polymer

Lacayo, Catherine

2012-01-01T23:59:59.000Z

272

Electromagnetic Interference (EMI) Shielding of Single-Walled Carbon  

E-Print Network (OSTI)

Electromagnetic Interference (EMI) Shielding of Single-Walled Carbon Nanotube Epoxy Composites Ning (SWNT)-polymer composites have been fabricated to evaluate the electromagnetic interference (EMI

Gao, Hongjun

273

Seismic design, testing and analysis of reinforced concrete wall buildings  

E-Print Network (OSTI)

and Priestley M.J.N. (1992). Seismic Design of Reinforced2007). Displacement Based Seismic Design of Structures.318-99 Provisions for Seismic Design of Structural Walls.

Panagiotou, Marios

2008-01-01T23:59:59.000Z

274

Wall and laser spot motion in cylindrical hohlraums  

SciTech Connect

Wall and laser spot motion measurements in empty, propane-filled and plastic (CH)-lined gold coated cylindrical hohlraums were performed on the Omega laser facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. Wall motion was measured using axial two-dimensional (2D) x-ray imaging and laser spot motion was perpendicularly observed through a thinned wall using streaked hard x-ray imaging. Experimental results and 2D hydrodynamic simulations show that while empty targets exhibit on-axis plasma collision, CH-lined and propane-filled targets inhibit wall expansion, corroborated with perpendicular streaked imaging showing a slower motion of laser spots.

Huser, G.; Courtois, C.; Monteil, M.-C. [CEA, DAM, DIF, F-91297 Arpajon (France)

2009-03-15T23:59:59.000Z

275

Self-assembling functionalized single-walled carbon nanotubes  

E-Print Network (OSTI)

Single-walled carbon nanotubes Carbon nanotubes (CNTs) arescale synthesis of carbon nanotubes." Nature, Vol.358, 220-Ropes of Metallic Carbon Nanotubes." Science, Vol.273(5274),

Gao, Yan

2011-01-01T23:59:59.000Z

276

Nuclear Reactor Materials and Fuels  

Science Journals Connector (OSTI)

Nuclear reactor materials and fuels can be classified into six categories: Nuclear fuel materials Nuclear clad materials Nuclear coolant materials Nuclear poison materials Nuclear moderator materials

Dr. James S. Tulenko

2012-01-01T23:59:59.000Z

277

Method for immobilizing particulate materials in a packed bed  

DOE Patents (OSTI)

The present invention pertains generally to immobilizing particulate matter contained in a "packed" bed reactor so as to prevent powder migration, compaction, coalescence, or the like. More specifically, this invention relates to a technique for immobilizing particulate materials using a microporous foam-like polymer such that a) the particulate retains its essential chemical nature, b) the local movement of the particulate particles is not unduly restricted, c) bulk powder migration and is prevented, d) physical and chemical access to the particulate is unchanged over time, and e) very high particulate densities are achieved. The immobilized bed of the present invention comprises a vessel for holding particulate matter, inlet and an outlet ports or fittings, a loosely packed bed of particulate material contained within the vessel, and a three dimensional porous matrix for surrounding and confining the particles thereby fixing the movement of individual particle to a limited local position. The established matrix is composed of a series of cells or chambers comprising walls surrounding void space, each wall forming the wall of an adjacent cell; each wall containing many holes penetrating through the wall yielding an overall porous structure and allowing useful levels of gas transport.

Even, Jr., William R. (Livermore, CA); Guthrie, Stephen E. (Livermore, CA); Raber, Thomas N. (Livermore, CA); Wally, Karl (Lafayette, CA); Whinnery, LeRoy L. (Livermore, CA); Zifer, Thomas (Manteca, CA)

1999-01-01T23:59:59.000Z

278

Mr. Andy Wall0 The Aerospace Corporation  

Office of Legacy Management (LM)

'k.f' :, , j '"; ,,' 'k.f' :, , j '"; ,,' DEC 5 1984 Mr. Andy Wall0 The Aerospace Corporation suite 4000 955 L'Enfant Plaza, S.W. Washington, D.C. 20024 Dear Mr. Wallo: The Divisfon of Remedial Action Projects staff has reviewed the authority review documents for Gardinler, Inc., Tampa, Florida; Conserv (formerly Virginia-Carolina Chemical Co.), Nichols, Florida; and Blockson Chemical co., Joliet, Illinois. Based on the content therein and in consultation with Mr. Steve Miller, Office of General Counsel (C&11), Departamt of Energy, It has been determined that the Department has no authority, through the Atomic Energy Act of 1954, as amended, to conduct remedial action at the aforementioned sites, Therefore, please prepare the document packages necessary to notify the appropriate state authorities and the

279

Hadronization at the AdS wall  

E-Print Network (OSTI)

We describe hadronization events, using the AdS/CFT Correspondence, which display many of the qualitative features expected in QCD. In particular we study the motion of strings with separating end points in a back-reacted hard wall geometry. The solutions show the development of a linear QCD-like string. The end points oscillate in the absence of string breaking. We introduce string breaking by hand and evolve the new state forward in time to observe the separation of two string segments. A kink associated with this breaking evolves to the end points of the string inducing rho meson production. We explicitly compute the rho meson production at the end point.

Nick Evans; James French; Kristan Jensen; Ed Threlfall

2009-08-04T23:59:59.000Z

280

Method for forming materials  

DOE Patents (OSTI)

A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

2009-10-06T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Wall Lake Municipal Utilities Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Wall Lake Municipal Utilities Wind Farm Wall Lake Municipal Utilities Wind Farm Jump to: navigation, search Name Wall Lake Municipal Utilities Wind Farm Facility Wall Lake Municipal Utilities Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Wall Lake Municipal Utilities Developer Wall Lake Municipal Utilities Energy Purchaser Wall Lake Municipal Utilities Location Wall Lake IA Coordinates 42.281965°, -95.094098° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.281965,"lon":-95.094098,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

282

Resistive ferromagnetic wall modes in theory and experiment  

SciTech Connect

Effects of the ferromagnetic resistive wall on the plasma stability are analyzed. The analysis is based on the equations describing the perturbation dynamics outside the plasma, assuming a linear plasma response. A single-mode cylindrical model is used with two features that differ from the standard case: the wall magnetic permeability is incorporated and the thin-wall approximation is waived. The derivations are performed so that the results can be applied to both tokamaks and line-tied pinches. This is done to allow conclusions for tokamaks from comparison of the developed theory with the experimental data on the resistive and ferromagnetic wall modes in the Wisconsin rotating wall machine with and without a ferritic wall [W. F. Bergerson, D. A. Hannum, C. C. Hegna, R. D. Kendrick, J. S. Sarff, and C. B. Forest, Phys. Rev. Lett. 101, 235005 (2008)]. The model shows that the ferromagnetic wall effect is always destabilizing. However, it must be small under standard conditions in tokamaks. The effect can be much stronger in the pinch with lower magnetic field and larger wall permeability. The dispersion relation obtained here makes possible an explanation of the experimental results available so far, including those from the Wisconsin machine reported recently as strongly contradictory to expectations based on earlier models. Also, an easy practical solution for compensating the destabilizing ferromagnetic effect in tokamaks is proposed.

Pustovitov, V. D. [Nuclear Fusion Institute, Russian Research Centre Kurchatov Institute, Kurchatov Square 1, Moscow 123182 (Russian Federation)

2009-05-15T23:59:59.000Z

283

Laser-produced plasma-wall interaction O. RENNER,1  

E-Print Network (OSTI)

Laser-produced plasma-wall interaction O. RENNER,1 R. LISKA,2 AND F.B. ROSMEJ3,4 1 Institute, France (RECEIVED 30 August 2009; ACCEPTED 21 September 2009) Abstract Jets of laser­generated plasma surfaces (walls). The pilot experiments carried out on the iodine laser system (5­200 J, 0.44 mm, 0

Liska, Richard

284

Electron-wall interaction in Hall thrustersa... Y. Raitsesb  

E-Print Network (OSTI)

Electron-wall interaction in Hall thrustersa... Y. Raitsesb and D. Staack Princeton Plasma Physics; accepted 22 February 2005; published online 2 May 2005 Electron-wall interaction effects in Hall thrusters this threshold, the electron energy gain is constant in the acceleration region and therefore, secondary electron

285

CP-Violating Bubble Wall and Electroweak Baryogenesis  

Science Journals Connector (OSTI)

...August 1997 research-article Articles CP-Violating Bubble Wall and Electroweak...baryogenesis depends on the profile of the CP-violating bubble wall created at the first...point out that a sufficiently small explicit CP violation gives nonperturbative effects......

Koichi Funakubo; Akira Kakuto; Shoichiro Otsuki; Fumihiko Toyoda

1997-08-01T23:59:59.000Z

286

Global structure of moduli space for BPS walls  

SciTech Connect

We study the global structure of the moduli space of BPS walls in the Higgs branch of supersymmetric theories with eight supercharges. We examine the structure in the neighborhood of a special Lagrangian submanifold M, and find that the dimension of the moduli space can be larger than that naively suggested by the index theorem, contrary to previous examples of BPS solitons. We investigate BPS wall solutions in an explicit example of M using Abelian gauge theory. Its Higgs branch turns out to contain several special Lagrangian submanifolds including M. We show that the total moduli space of BPS walls is the union of these submanifolds. We also find interesting dynamics between BPS walls as a by-product of the analysis. Namely, mutual repulsion and attraction between BPS walls sometimes forbid a movement of a wall and lock it in a certain position; we also find that a pair of walls can transmute to another pair of walls with different tension after they pass through.

Eto, Minoru; Isozumi, Youichi; Nitta, Muneto; Ohashi, Keisuke; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Ohta, Kazutoshi [Theoretical Physics Laboratory, The Institute of Physical and Chemical Research (RIKEN), Saitama 351-0198 (Japan); Tachikawa, Yuji [Department of Physics, University of Tokyo, Tokyo 112-0033 (Japan)

2005-05-15T23:59:59.000Z

287

Absorption spectroscopy of individual single-walled carbon nanotubes  

E-Print Network (OSTI)

Absorption spectroscopy of individual single-walled carbon nanotubes Stéphane Berciaud,a Laurent-walled carbon nanotubes (SWNTs) lead to heterogeneous samples containing mixtures of metallic and semiconducting species with a variety of lengths and defects. Optical detection at the single nanotube level should thus

Boyer, Edmond

288

Simulations of nanosensors based on single walled carbon nanotubes  

E-Print Network (OSTI)

Simulations of nanosensors based on single walled carbon nanotubes Polina Pine1, Yuval E. Yaish2. The potential of single-walled carbon nanotubes as mass sensors is examined. The change in mass leads to proportional changes in the nanotube vibrational frequencies, which are monitored during atomistic simulations

Adler, Joan

289

Scanning tunneling spectroscopy of suspended single-wall carbon nanotubes  

E-Print Network (OSTI)

Scanning tunneling spectroscopy of suspended single-wall carbon nanotubes B. J. LeRoy,a) S. G-wall carbon nanotubes that are freely suspended over a trench. The nanotubes were grown by chemical vapor on the freestanding portions of the nanotubes. Spatially resolved spectroscopy on the suspended portion of both

Dekker, Cees

290

Characterization of single wall carbon nanotubes by nonane preadsorption  

E-Print Network (OSTI)

energy for nitrogen adsorbed in nanotubes at zero coverage within the range of 12­18 kJ/mol. This bindingCharacterization of single wall carbon nanotubes by nonane preadsorption Oleg Byl a , Jie Liu b The preferential blocking of the interior adsorption sites of single walled carbon nanotubes (SWNTs) by n

Liu, Jie

291

Electrical Transport in Single-Wall Carbon Nanotubes  

E-Print Network (OSTI)

. (a) Schematic view a nanotube field-effect transistor (b) The Dirac energy dispersion coneElectrical Transport in Single-Wall Carbon Nanotubes Michael J. Biercuk1,3 , Shahal Ilani2 metal and semiconducting single-wall carbon nanotubes. The fundamental scattering mechanisms governing

McEuen, Paul L.

292

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

Raman Measurements on Electrochemically Doped Single-Walled Carbon Nanotubes P. M. Rafailov, M and studied the Raman response of electro- chemically doped single-walled carbon nanotubes (SWNT) using different salt solutions. The fre- quency shift of the radial breathing mode (RBM) and the high-energy mode

Nabben, Reinhard

293

Wall Sculpture by Ellsworth Kelly Installed on Dartmouth Campus  

E-Print Network (OSTI)

Wall Sculpture by Ellsworth Kelly Installed on Dartmouth Campus Dartmouth Panels will be dedicated District, a wall sculpture by renowned abstract artist Ellsworth Kelly has been installed on the eastern façade of the Hopkins Center for the Arts, facing the Visual Arts Center. Kelly was in attendance

Shepherd, Simon

294

Ultrastructure and Composition of the Nannochloropsis gaditana Cell Wall  

Science Journals Connector (OSTI)

...removing the walls from the green pellet at the bottom of the tube until no green pellet was observed...the National Renewable Energy Laboratory (46). Characterization...Environ. Prog. Sustain. Energy 32 :989-1001. doi...wall proteomics of the green alga Haematococcus pluvialis...

Matthew J. Scholz; Taylor L. Weiss; Robert E. Jinkerson; Jia Jing; Robyn Roth; Ursula Goodenough; Matthew C. Posewitz; Henri G. Gerken

2014-09-19T23:59:59.000Z

295

NON-RECTANGULAR RC WALLS: A REVIEW ON EXPERIMENTAL INVESTIGATIONS  

E-Print Network (OSTI)

section. It was rare that tests were done using load paths that did not follow the principal axes subjected to unidirectional or bidirectional loading along one or both of the principal axes of the wall-sections such as for example L-shaped or U-shaped walls which were tested under quasi-static or dynamic loads. The tests

Thévenaz, Jacques

296

Optical absorption intensity of semiconductor single-wall carbon nanotubes  

E-Print Network (OSTI)

Optical absorption intensity of semiconductor single-wall carbon nanotubes Y. Oyama1 , R. Saito1. The optical absorption intensity is inversely proportional to the diameter in the unit of per carbon atom of single-wall carbon nanotubes (SWNT) synthesized by alcohol CCVD (ACCVD) method and HiPco method [1

Maruyama, Shigeo

297

ORIGINAL PAPER Hydrothermal process synthesized electrocatalytic multi-walled  

E-Print Network (OSTI)

ORIGINAL PAPER Hydrothermal process synthesized electrocatalytic multi-walled carbon nanotubes as MWCNTs-Au, have been successfully prepared by a facile hydrothermal pro- cess of gold(III) chloride (Au. Keywords Hydrothermal Á Composites Á Au microparticles Á Multi-walled carbon nanotubes Á Ethanol oxidation

Guo, John Zhanhu

298

Associative model for solving the wall-following problem  

Science Journals Connector (OSTI)

A navigation system for a robot is presented in this work. The Wall-Following problem has become a classic problem of Robotics due to robots have to be able to move through a particular stage. This problem is proposed as a classifying task and it is ... Keywords: associative models, classification, morphological models, wall-following

Rodolfo Navarro; Elena Acevedo; Antonio Acevedo; Fabiola Martnez

2012-06-01T23:59:59.000Z

299

Optical microcavity with semiconducting single-wall carbon nanotubes  

E-Print Network (OSTI)

Optical microcavity with semiconducting single- wall carbon nanotubes Etienne Gaufrès,1 Nicolas-Perot microcavities based on semiconducting single-wall carbon nanotubes with a quality factor of 160. We properties References and links 1. P. Avouris, M. Freitag and V. Perebeinos, "Carbon nanotube photonics

Paris-Sud XI, Université de

300

Transverse Effect due to Short-range Resistive Wall Wakefield  

SciTech Connect

For accelerator designs with ultra short electron beams, beam dynamics study has to invoke the short-range wakefields. In this paper, we first obtain the short-range dipole mode resistive wall wakefield. Analytical approach is then developed to study the single bunch transverse beam dynamics due to this short-range resistive wall wake. The results are applied to the LCLS undulator.

Juhao Wu; Alex Chao; Jean Delayen

2007-06-18T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Borehole-Wall Imaging with Acoustic and Optical Televiewers for  

Open Energy Info (EERE)

Borehole-Wall Imaging with Acoustic and Optical Televiewers for Borehole-Wall Imaging with Acoustic and Optical Televiewers for Fractured-Bedrock Aquifer Investigations Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Borehole-Wall Imaging with Acoustic and Optical Televiewers for Fractured-Bedrock Aquifer Investigations Abstract Imaging with acoustic and optical televiewers results in continuous and oriented 360 degree views of the borehole wall from which the character and orientation of lithologic and structural features can be defined for fractured-bedrock aquifer investigations. Fractures are more clearly defined under a wider range of conditions on acoustic images than on optical images including dark-colored rocks, cloudy borehole water, and coated borehole walls. However, optical images allow for the direct viewing

302

A Facile High-speed Vibration Milling Method to Water-disperse Single- walled Carbon Nanohorns  

SciTech Connect

A high-speed vibration milling (HSVM) method was applied to synthesize water dispersible single- walled carbon nanohorns (SWNHs). Highly reactive free radicals (HOOCCH2CH2 ) produced from an acyl peroxide under HSVM conditions react with hydrophobic SWNHs to produce a highly water dispersible derivative (f-SWNHs), which has been characterized in detail by spectroscopic and microscopic techniques together with thermogravimetric analysis (TGA) and dynamic light scatter- ing (DLS). The carboxylic acid functionalized, water-dispersible SWNHs material are versatile precursors that have potential applications in the biomedical area.

Shu, Chunying [Virginia Polytechnic Institute and State University (Virginia Tech); Zhang, Jianfei [Virginia Polytechnic Institute and State University (Virginia Tech); Sim, Jae Hyun [Virginia Polytechnic Institute and State University (Virginia Tech); Burke, Brian [University of Virginia, Charlottesville; Williams, Keith A [University of Virginia, Charlottesville; Rylander, Nichole M [Virginia Polytechnic Institute and State University (Virginia Tech); Campbell, Tom [Virginia Polytechnic Institute and State University (Virginia Tech); Puretzky, Alexander A [ORNL; Rouleau, Christopher M [ORNL; Geohegan, David B [ORNL; More, Karren Leslie [ORNL; Esker, Alan R [Virginia Polytechnic Institute and State University (Virginia Tech); Gibson, Harry W [Virginia Polytechnic Institute and State University (Virginia Tech); Dorn, Harry C [Virginia Polytechnic Institute and State University (Virginia Tech)

2010-01-01T23:59:59.000Z

303

Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes.  

E-Print Network (OSTI)

??This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered (more)

Kim, Sangseop 1956-

2005-01-01T23:59:59.000Z

304

Determination of Wall Thickness and Height when Cutting Various Materials with Wire Electric Discharge Machining Processes.  

E-Print Network (OSTI)

?? This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. (more)

Kim, Sangseop

2005-01-01T23:59:59.000Z

305

NEWTON's Material Science References  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science References Material Science References Do you have a great material science reference link? Please click our Ideas page. Featured Reference Links: Materials Research Society Materials Research Society The Materials Research Society has assembled many resources in its Materials Science Enthusiasts site. This site has information for the K-12 audience, general public, and materials science professionals. Material Science nanoHUB nanHUB.org is the place for nanotechnology research, education, and collaboration. There are Simulation Programs, Online Presentations, Courses, Learning Modules, Podcasts, Animations, Teaching Materials, and more. (Intened for high school and up) Materials Science Resources on the Web Materials Science Resources on the Web This site gives a good general introduction into material science. Sponsered by Iowa State, it talks about what material science is, ceramics and composites, and other topics.

306

Theoretical comparison between field emission from single-wall and multi-wall carbon nanotubes A. Mayer,1,  

E-Print Network (OSTI)

Theoretical comparison between field emission from single-wall and multi-wall carbon nanotubes A s : 73.63.Fg, 79.70. q, 85.35.Kt, 03.65.Nk I. INTRODUCTION Carbon nanotubes show interesting field-emission of field emission from carbon nanotubes,13­16 we now consider the depen- dence of the emission from single

Mayer, Alexandre

307

Domain wall QCD with physical quark masses  

E-Print Network (OSTI)

We present results for several light hadronic quantities ($f_\\pi$, $f_K$, $B_K$, $m_{ud}$, $m_s$, $t_0^{1/2}$, $w_0$) obtained from simulations of 2+1 flavor domain wall lattice QCD with large physical volumes and nearly-physical pion masses at two lattice spacings. We perform a short, O(3)%, extrapolation in pion mass to the physical values by combining our new data in a simultaneous chiral/continuum `global fit' with a number of other ensembles with heavier pion masses. We use the physical values of $m_\\pi$, $m_K$ and $m_\\Omega$ to determine the two quark masses and the scale - all other quantities are outputs from our simulations. We obtain results with sub-percent statistical errors and negligible chiral and finite-volume systematics for these light hadronic quantities, including: $f_\\pi$ = 130.2(9) MeV; $f_K$ = 155.5(8) MeV; the average up/down quark mass and strange quark mass in the $\\overline {\\rm MS}$ scheme at 3 GeV, 2.997(49) and 81.64(1.17) MeV respectively; and the neutral kaon mixing parameter, $B_K$, in the RGI scheme, 0.750(15) and the $\\overline{\\rm MS}$ scheme at 3 GeV, 0.530(11).

RBC; UKQCD collaborations; :; T. Blum; P. A. Boyle; N. H. Christ; J. Frison; N. Garron; R. J. Hudspith; T. Izubuchi; T. Janowski; C. Jung; A. Juettner; C. Kelly; R. D. Kenway; C. Lehner; M. Marinkovic; R. D. Mawhinney; G. McGlynn; D. J. Murphy; S. Ohta; A. Portelli; C. T. Sachrajda; A. Soni

2014-11-25T23:59:59.000Z

308

Pneumatic wall-locking geophone system  

DOE Patents (OSTI)

A seismic signal receiving system is provided for use in boreholes to receive seismic waves in carrying out geophysical investigations. The system includes three pairs of opposed plates, each of the pairs of plates including oppositely facing outer surfaces for engagement with opposite sides of a borehole. A seismic receiver is mounted on the inner surface of each of the plates for receiving seismic signals. A double-acting, fluid-operated actuator selectively causes relative movement of the plates of the pairs of plates away from each other to provide expansion thereof so as to enable the plates to engage the walls of a borehole and selectively causes relative movement of the plates of the pairs of plates toward each other to provide retraction thereof so as to enable the system to be removed from a borehole. The pairs of plates each comprise a relatively long plate and a relatively short plate. An expandable linkage interconnects the long plates at the distal ends thereof. The plates are mechanically biassed into the retracted state so that the plates return to this state in the event of a system failure.

Kuhlman, Harland L. (Minneapolis, MN); Cumerlato, Calvin L. (Minneapolis, MN); Tweeton, Daryl R. (Apple Valley, MN)

1991-01-01T23:59:59.000Z

309

Dynamics of domain wall networks with junctions  

SciTech Connect

We use a combination of analytic tools and an extensive set of the largest and most accurate three-dimensional field theory numerical simulations to study the dynamics of domain wall networks with junctions. We build upon our previous work and consider a class of models which, in the limit of large number N of coupled scalar fields, approaches the so-called ''ideal'' model (in terms of its potential to lead to network frustration). We consider values of N between N=2 and N=20, and a range of cosmological epochs, and we also compare this class of models with other toy models used in the past. In all cases we find compelling evidence for a gradual approach to scaling, strongly supporting our no-frustration conjecture. We also discuss the various possible types of junctions (including cases where there is a hierarchy of them) and their roles in the dynamics of the network. Finally, we provide a cosmological Zel'dovich-type bound on the energy scale of this kind of defect network: it must be lower than 10 keV.

Avelino, P. P.; Oliveira, J. C. R. E. [Centro de Fisica do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Departamento de Fisica da Faculdade de Ciencias da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Martins, C. J. A. P. [Centro de Astrofisica da Universidade do Porto, Rua das Estrelas s/n, 4150-762 Porto (Portugal); DAMTP, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom); Menezes, J. [Centro de Fisica do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Centro de Astrofisica da Universidade do Porto, Rua das Estrelas s/n, 4150-762 Porto (Portugal); Departamento de Fisica, Universidade Federal da Paraiba, Caixa Postal 5008, 58051-970 Joao Pessoa, Paraiba (Brazil); Menezes, R. [Departamento de Fisica, Universidade Federal da Paraiba, Caixa Postal 5008, 58051-970 Joao Pessoa, Paraiba (Brazil)

2008-11-15T23:59:59.000Z

310

Educational Material Science Games  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science Games Material Science Games Do you have a great material science game? Please click our Ideas page. Featured Games: >KS2 Bitsize BBC - Materials KS2 Bitsize BBC - Materials Sponsored by the BBC, K2S Bitsize offers tons of free online science games including a section on materials. Learn about the changes in materials, changing states, heat, rocks, soils, solids, liquids, gases, and much more. Science Kids - Properties of Materials Science Kids - Properties of Materials Learn about the properties of materials as you experiment with a variety of objects in this great science activity for kids. Discover the interesting characteristics of materials; are they flexible, waterproof, strong or transparent? Characteristics of Materials - BBC Schools Characteristics of Materials - BBC Schools

311

Polymeric compositions incorporating polyethylene glycol as a phase change material  

DOE Patents (OSTI)

A polymeric composition comprising a polymeric material and polyethylene glycol or end-capped polyethylene glycol as a phase change material, said polyethylene glycol and said end-capped polyethylene glycol having a molecular weight greater than about 400 and a heat of fusion greater than about 30 cal/g; the composition is useful in making molded and/or coated materials such as flooring, tiles, wall panels and the like; paints containing polyethylene glycols or end-capped polyethylene glycols are also disclosed.

Salyer, Ival O. (Dayton, OH); Griffen, Charles W. (Mason, OH)

1989-01-01T23:59:59.000Z

312

Case history: Vertical barrier wall system for Superfund Site  

SciTech Connect

Design considerations and construction aspects are presented for the installation of a vertical barrier wall system for the Boeing Company at a Superfund Site near Seattle, WA. The construction was performed during 1996. The vertical barrier wall system included: (1) a soil-bentonite (SB) slurry wall, approximately 670 meters (2200 feet) in length, ranging from 12 to 21 meters (40 to 70 feet) in depth; (2) expansion of a cover system over the area enclosed by the SB wall; and (3) surface drainage improvements. Design and construction of the system addressed requirements of a Consent Decree for the site issued in 1993. The paper discusses the development of the design to meet remedial performance goals of preventing migration of contaminants in the soil/groundwater system and aiding aquifer restoration. Secondly, the paper details installation of the SB wall, highlighting the more significant construction issues, which included excavation of the wall through glacially deposited cobbles/boulders/till as well as addressing the severe elevation changes along the wall alignment. Thirdly, the paper presents Quality Assurance (QA) monitoring and testing performed during the construction phase.

Koelling, M.A.; Kovac, C.P.; Norris, J.E.

1997-12-31T23:59:59.000Z

313

A Survey of Databases for Analysis of Plant Cell Wall-Related Enzymes  

E-Print Network (OSTI)

Plant Cell Wall-Related Enzymes Peijian Cao & Ki-Hong Jung &plant cell wall-related enzymes. The goal of this review isfor Plant Cell Wall-Related Enzymes (plantcellwalls.ucdavis.

Cao, Peijian; Jung, Ki-Hong; Ronald, Pamela C.

2010-01-01T23:59:59.000Z

314

Conductance-Controlled Point Functionalization of Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

of Single-Walled Carbon Nanotubes Brett R. Goldsmith, 1 Johnof Single-Walled Carbon Nanotubes Brett R. Goldsmith et al.single-walled carbon nanotubes (SWNTs) to fabricate single-

Collins, Philip G

2007-01-01T23:59:59.000Z

315

Advanced Metal Fiber Wall-Flow DPF For Diesel Emission Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Metal Fiber Wall-Flow DPF For Diesel Emission Control Advanced Metal Fiber Wall-Flow DPF For Diesel Emission Control A new metal fiber wall-flow DPF with up to 99% efficiency and...

316

SUBCRITICAL BUBBLES NEAR THE PHASE SPACE DOMAIN WALL  

E-Print Network (OSTI)

We study the subcritical bubble formation near the phase space domain wall. We take into account that the phase of the scalar field can vary using complex U(1) symmetric field and a phenomenological potential with cubic term responsible to symmetry breaking. We show that the presence of the domain wall induces subcritical bubbles so that their formation rate near the wall is considerably larger than far of it. The allowed deviations of the phases of new bubbles are so large that they prevent the system from induced nucleation.

J. Sirkka; I. Vilja

1995-03-31T23:59:59.000Z

317

Conceptual design of the INTOR first-wall system  

SciTech Connect

The design concept and performance characteristics of the first-wall design for the phase-1 INTOR (International Tokamak Reactor) study is described. The reference design consists of a water-cooled stainless steel panel. The major uncertainty regarding the performance of the bare stainless steel wall relates to the response of a thin-melt layer predicted to form on limited regions during a plasma disruption. A more-complex backup design, which incorporates radiatively cooled graphite tiles on the inboard wall, is briefly described.

Smith, D.L.; Majumdar, S.; Mattas, R.F.; Turner, L.; Jung, J.; Abdou, M.A.; Bowers, D.; Trachsel, C.; Merrill, B.

1981-10-01T23:59:59.000Z

318

JOURNAL ut PHYSIQUE Colloque C7, supplement au n 12, Tome 38, decembre 1977, page C7-51 A MICROSCOPIC THEORY FOR DOMAIN WALL MOTION  

E-Print Network (OSTI)

the fact that the order parameter r\\ is not a conserved quantity. If the free energy is not at a minimum KINETICS J. W. CAHN Institute for Materials Research, National Bureau of Standards, Washington, D.C. 20234 to mean curvature. Unlike previous models, the velocity is not proportional to domain wall free energy

Paris-Sud XI, Université de

319

Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Areas Research Areas Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Directionally Solidified Materials Using high-temperature optical floating zone furnace to produce monocrystalline molybdenum alloy micro-pillars Home | Science & Discovery | Advanced Materials Advanced Materials | Advanced Materials SHARE ORNL has the nation's most comprehensive materials research program and is a world leader in research that supports the development of advanced materials for energy generation, storage, and use. We have core strengths in three main areas: materials synthesis, characterization, and theory. In other words, we discover and make new materials, we study their structure,

320

MATERIALS TRANSFER AGREEMENT  

NLE Websites -- All DOE Office Websites (Extended Search)

MTAXX-XXX 1 MATERIAL TRANSFER AGREEMENT for Manufacturing Demonstration Facility and Carbon Fiber Technology Facility In order for the RECIPIENT to obtain materials, the RECIPIENT...

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Material Point Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Point Methods and Multiphysics for Fracture and Multiphase Problems Joseph Teran, UCLA and Alice Koniges, LBL Contact: jteran@math.ucla.edu Material point methods (MPM)...

322

Materials | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Materials Materials 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Vehicle Technologies Plenary...

323

Energy Materials & Processes | EMSL  

NLE Websites -- All DOE Office Websites (Extended Search)

in catalysts and energy materials needed to design new materials and systems for sustainable energy applications. By facilitating the development and rapid dissemination...

324

EMSL - Energy Materials & Processes  

NLE Websites -- All DOE Office Websites (Extended Search)

in catalysts and energy materials needed to design new materials and systems for sustainable energy applications. By facilitating the development and rapid dissemination...

325

E-Print Network 3.0 - anterior vaginal wall Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

vaginal wall Search Powered by Explorit Topic List Advanced Search Sample search results for: anterior vaginal wall Page: << < 1 2 3 4 5 > >> 1 Anterior repair using Bologna...

326

E-Print Network 3.0 - aligned single-walled carbon Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: Thermal conductivity measurement of vertically-aligned single-walled carbon nanotubes by 3 omega... the high-purity vertically aligned single-walled carbon nanotubes 2,...

327

E-Print Network 3.0 - aligned double-walled carbon Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: , and H. M. Cheng. Polarized raman analysis of aligned double- walled carbon nanotubes. Physical Review B... Nonlinear Oscillations of a Double-Walled Carbon Nanotube...

328

E-Print Network 3.0 - antibody-functionalized single-walled carbon...  

NLE Websites -- All DOE Office Websites (Extended Search)

5 > >> 1 Molecular Dynamics Simulation of Nucleation Process of Single-Walled Carbon Nanotubes Summary: Molecular Dynamics Simulation of Nucleation Process of Single-Walled Carbon...

329

E-Print Network 3.0 - aligned single wall Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary: Thermal conductivity measurement of vertically-aligned single-walled carbon nanotubes by 3 omega... the high-purity vertically aligned single-walled carbon nanotubes 2,...

330

Magnetic soft x-ray microscopy of the domain wall depinning process in permalloy magnetic nanowires  

E-Print Network (OSTI)

R P 2002 Magnetic domain-wall logic Science 296 1688 [2]magnetic domainwall nanowire shift register Science 320

Im, Mi-Young

2014-01-01T23:59:59.000Z

331

Decorating multi-walled carbon nanotubes with nickel nanoparticles for selective hydrogenation of citral  

SciTech Connect

The nanocomposites of multi-walled carbon nanotubes (MWNTs) decorated with nickel nanoparticles were conveniently prepared by a chemical reduction of nickel salt in the present of poly(acrylic acid) grafted MWNTs (PAA-g-MWNTs). Due to the strong interaction between Ni{sup 2+} and -COOH, PAA-g-MWNTs became an excellent supporting material for Ni nanoparticles. The morphology and distribution of Ni nanoparticles on the surface of MWNTs were greatly influenced by the reduction temperatures, the experimental results also showed that the distribution of Ni nanoparticles was greatly improved while the MWNTs were modified by poly(acrylic acid) (PAA). The hydrogenation activity and selectivity of MWNTs decorated with Ni nanoparticles (Ni-MWNTs) for alpha, beta-unsaturated aldehyde (citral) were also studied, and the experimental results showed that the citronellal, an important raw material for flavoring and perfumery industries, is the favorable product with a percentage as high as 86.9%, which is 7 times higher than that of catalyst by Ni-supported active carbon (Ni-AC). - Abstract: Nickel nanoparticles decorated multi-walled carbon nanotubes (Ni-MWNTs) nanocomposites were conveniently prepared by a chemical reduction of nickel salt in the present of poly(acrylic acid) grafted MWNTs (PAA-g-MWNTs). These nanocomposites possessed excellent catalytic activity and selectivity for hydrogenation of citral.

Tang Yuechao; Yang Dong [Key Laboratory of Molecular Engineering of Polymers (Ministry of Education), Department of Macromolecular Science and Advanced Materials Laboratory, Fudan University, Shanghai 200433 (China); Qin Feng [Department of Chemistry, Fudan University, Shanghai 200433 (China); Hu Jianhua [Key Laboratory of Molecular Engineering of Polymers (Ministry of Education), Department of Macromolecular Science and Advanced Materials Laboratory, Fudan University, Shanghai 200433 (China); Wang Changchun, E-mail: ccwang@fudan.edu.c [Key Laboratory of Molecular Engineering of Polymers (Ministry of Education), Department of Macromolecular Science and Advanced Materials Laboratory, Fudan University, Shanghai 200433 (China); Xu Hualong [Department of Chemistry, Fudan University, Shanghai 200433 (China)

2009-08-15T23:59:59.000Z

332

NREL: News Feature - NREL Breaks Down Walls for Biofuels  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Breaks Down Walls for Biofuels NREL Breaks Down Walls for Biofuels November 30, 2009 Researchers at the National Renewable Energy Laboratory (NREL) and ethanol producers are racing to come up with ways to make ethanol from cellulosic biomass that are cheaper and easier to produce than current methods. But they are hitting a wall. Cell walls in plants are making the production of cellulosic ethanol a challenge. So researchers are creating their own computer program to help model and break down the tiny fibers of cellulose - or fibrils - found in plant cells. Although ethanol is becoming more available to consumers, NREL is working closely with the U.S. Department of Energy (DOE) to meet a quickly approaching goal to produce competitively priced ethanol for $1.50 per gallon by 2012. Why the rush? DOE believes this is the price at which

333

Experimental Investigation of Natural Convection in Trombe Wall Systems  

E-Print Network (OSTI)

In this paper, experiments with a passive solar building with Trombe wall in the north cold climate are carried out and discussed, and the natural convection heat transfer process has been investigated. The relativity of the factors affecting indoor...

Chen, B.; Zhao, J.; Chen, C.; Zhuang, Z.

2006-01-01T23:59:59.000Z

334

Accident Simulation Tests on a Wet-Wall LNG Design  

Science Journals Connector (OSTI)

The wet wall design concept for containing cryogenic Hquids has been successfully employed in the Apollo space program [1...] and may be described as a double-hulled tank with a liquid-tight insulation system. ...

P. O. Metz; R. W. Lautensleger; D. A. Sarno

1977-01-01T23:59:59.000Z

335

High-R Walls - Building America Top Innovation | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

R values and the need for vented cladding to reduce condensation potential with some insulation types. Research on common high-R wall assemblies has shown that the measured R-value...

336

Superconductivity in Bundles of Double-Wall Carbon Nanotubes  

E-Print Network (OSTI)

We present electrical and thermal specific heat measurements that show superconductivity in double-wall carbon nanotube (DWCNT) bundles. Clear evidence, comprising a resistance drop as a function of temperature, magnetoresistance ...

Shi, Wu

337

Building America Case Study: Evaluating Through-Wall Air Transfer...  

Energy Savers (EERE)

the performance of market-available through-wall air transfer fans with respect to Air Conditioning Contractors of America (ACCA) Manual RS and ASHRAE Standard 55-2010...

338

Xylan deposition on secondary wall of Fagus crenata fiber  

Science Journals Connector (OSTI)

...Delignified and/or xylanase-treated secondary walls of Fagus crenata fibers were examined by field emission scanning electron microscopy. Microfibrils with a smooth surface were visible in the innermost surface

T. Awano; K. Takabe; M. Fujita

2002-02-01T23:59:59.000Z

339

Domain wall induced magnetoresistance in a superconductor/ferromagnet nanowire  

E-Print Network (OSTI)

In a nanowire consisting of a ferromagnet/insulator/superconductor multilayer structure, the superconductivity is shown to depend strongly on the configuration of the magnetic domain walls in the neighboring ferromagnetic ...

Miao, G. X.

340

Characterization of double walled carbon nanotubes-polyvinylidene fluoride nanocomposites  

E-Print Network (OSTI)

One of the main objectives of this thesis is to disperse double-walled carbon nanotubes (DWNT) in a polyvinylidene fluoride (PVDF) matrix, and to characterize the resulting composite using electrical, thermal, and mechanical characterization...

Almasri, Atheer Mohammad

2007-04-25T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Dynamic analysis of concrete coupled wall structures : a parametric study  

E-Print Network (OSTI)

Concrete coupled wall structure is a system that can efficiently dissipate energy under the effect of lateral loads. It has been widely used in medium height buildings for several decades. While researchers have conducted ...

Huang, Elaine Annabelle, 1981-

2005-01-01T23:59:59.000Z

342

Conserval aka SolarWall | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Name: Conserval (aka SolarWall) Place: Toronto, Ontario, Canada Zip: M3J2N5 Sector: Solar Product: Makes solar passive heating and cooling...

343

Chapter 6: Materials  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

: Materials : Materials Material Selection Sustainable Building Materials System Integration Issues | Chapter 6 Material Selection Materials The use of durable, attractive, and environmentally responsible building materials is a key element of any high-performance building effort. The use of natural and healthy materials contributes to the well-being of the occupants and to a feeling of connection with the bounty of the natural world. Many construction materials have significant environ- mental impacts from pollutant releases, habitat destruc- tion, and depletion of natural resources. This can occur during extraction and acquisition of raw materials, pro- "Then I say the Earth belongs to duction and manufacturing processes, and transporta- tion. In addition, some construction materials can harm

344

NEWTON's Material Science Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science Videos Material Science Videos Do you have a great material science video? Please click our Ideas page. Featured Videos: University of Maryland - Material Science University of Maryland - Material Science The Department of Materials Science and Engineering offers a set of videos about various topics in material science to help students understand what material science is. Learn about plasma, polymers, liquid crystals and much more. LearnersTV.com - Material Science LearnersTV.com - Material Science LearnersTV.com offers a series of educational material science lectures that are available to the public for free. Learn about topics like polymers, non-crystalline solids, crystal geometry, phase diagrams, phase transformations and more. NanoWerk - Nanotechnology Videos NanoWerk - Nanotechnology Videos

345

Energetic Materials Center Energetic Materials Center  

NLE Websites -- All DOE Office Websites (Extended Search)

experimental characterization of energetic material properties and reactions; and high-speed diagnostic instruments for measuring the chemical and physical processes that occur...

346

Field measurements of earth pressure on a cantilever retaining wall  

E-Print Network (OSTI)

. The measurements were made before and after backfilling for a duration of 385 days. The effects of a clay surcharge were studied. The total thrust of the measured lateral earth pressures was com- pared to total thrust determined from a Culmann graphical... to bearing pressures calculated by conventional methods. The measured bearing pressures compared reasonably well with the calculated pressures. Wall movement data indicated that the wall tilted or rotated toward the backfill during sand backfilling...

Schulze, Larry Wayne

2012-06-07T23:59:59.000Z

347

Excess free energy of supercooled liquids at disordered walls  

E-Print Network (OSTI)

Using a novel thermodynamic integration scheme, we compute the excess free energy, $\\gamma$, of a glass-forming, binary Lennard-Jones liquid in contact with a frozen amorphous wall, formed by particles frozen into a similar structure as the liquid. We find that $\\gamma$ is non-zero, becoming negative at low temperature. This indicates that the thermodynamics of the system is perturbed by the effect of the amorphous wall.

Benjamin, Ronald

2014-01-01T23:59:59.000Z

348

Field measurement of lateral earth pressures on retaining walls  

E-Print Network (OSTI)

. The measured pressures are compared with the computed Coulomb and Rankine pressures for the active case. The measured pressures on the cantilever wall are in close agreement with the theoretical pressures on the upper half of the wall, but the measured... Pressure Variance with Time and Temperature. INTRODUCTION Present Status of the Question -- The latera1 earth pressure theories developed by Coulomb in 1776 and Rankine in 1S57 are known as the classical earth pressure theories (5)*. The basic equation...

Riggins, Michael

2012-06-07T23:59:59.000Z

349

Potential digestibilities and digestion kinetics of forage cell wall components  

E-Print Network (OSTI)

LITERATURE REVIEW. EXPERIMENTAL PROCEDURES. Chemical Analysis Colorimetric Determinations Statistical Evaluation. 10 13 15 IV RESULTS AND DISCUSSION 16 V Characteristics of Forage Kinetics of Cell Wall Digestion SUMMARY AND CONCLUSIONS... and both of these variables appear to be the result of several dynamic processes. The amount of structural carbohydrates, the main constituents of the fibrous cell wall, ruminants can digest appears to be limited by the potential digestibility...

Tauskey, William Henry

1973-01-01T23:59:59.000Z

350

NREL Evaluates the Thermal Performance of Uninsulated Walls to Improve the Accuracy of Building Energy Simulation Tools (Fact Sheet)  

SciTech Connect

This technical highlight describes NREL research to develop models of uninsulated wall assemblies that help to improve the accuracy of building energy simulation tools when modeling potential energy savings in older homes. Researchers at the National Renewable Energy Laboratory (NREL) have developed models for evaluating the thermal performance of walls in existing homes that will improve the accuracy of building energy simulation tools when predicting potential energy savings of existing homes. Uninsulated walls are typical in older homes where the wall cavities were not insulated during construction or where the insulating material has settled. Accurate calculation of heat transfer through building enclosures will help determine the benefit of energy efficiency upgrades in order to reduce energy consumption in older American homes. NREL performed detailed computational fluid dynamics (CFD) analysis to quantify the energy loss/gain through the walls and to visualize different airflow regimes within the uninsulated cavities. The effects of ambient outdoor temperature, radiative properties of building materials, and insulation level were investigated. The study showed that multi-dimensional airflows occur in walls with uninsulated cavities and that the thermal resistance is a function of the outdoor temperature - an effect not accounted for in existing building energy simulation tools. The study quantified the difference between CFD prediction and the approach currently used in building energy simulation tools over a wide range of conditions. For example, researchers found that CFD predicted lower heating loads and slightly higher cooling loads. Implementation of CFD results into building energy simulation tools such as DOE2 and EnergyPlus will likely reduce the predicted heating load of homes. Researchers also determined that a small air gap in a partially insulated cavity can lead to a significant reduction in thermal resistance. For instance, a 4-in. tall air gap (Figure 1a) led to a 15% reduction in resistance. Similarly, a 2-ft tall air gap (Figure 1c) led to 54% reduction in thermal resistance. NREL researchers plan to extend this study to include additional wall configurations, and also to evaluate the performance of attic spaces with different insulation levels. NREL's objective is to address each potential issue that leads to inaccuracies in building energy simulation tools to improve the predictions.

Not Available

2012-01-01T23:59:59.000Z

351

Design for a fusion materials irradiation facility  

SciTech Connect

A fusion materials irradiation facility is required for the timely and cost-effective development of economical fusion power. Our conceptual machine provides sufficient neutron fluence for accelerated lifetime material tests in a time span of 1--2 y while producing less than 1 MW of fusion power. Neutral deuterium beams at 150 keV are injected into the center of a high-density warm tritium plasma housed in a 12-m-long cylindrical vessel. Superconducting magnets hold the plasma, which transfers the power to each end of the solenoid. The stainless steel end sections absorb the beam power and are externally cooled by high-pressure water to maintain the plasma-side wall temperature below 740 K. A service loop separates tritium from deuterium in the plasma effluent. Tritium is reinjected at each end. 9 refs., 2 figs., 2 tabs.

Walter, C.E.; Coensgen, F.H.

1988-09-02T23:59:59.000Z

352

LiveWall Operational Evaluation: Seattle Law Enforcement Pilot  

SciTech Connect

The LiveWall concept envisioned as an outgrowth of the Precision Information Environment (PIE) project allows communications between separate groups using interactive video, audio, and a shared desktop environment; this allows everyone to participate and collaborate in real time, regardless of location. The LiveWall concept provides a virtual window to other locations, where all parties can interact and collaboratively work with each other. This functionality is intended to improve multi-site coordination amongst emergency operations centers (EOC), field operations sites and across organizations and jurisdictions to accommodate communications during routine and emergency events. For the initial LiveWall operational evaluation PNNL partnered with the Seattle Police Department (SPD). This partnership allowed for the creation of an excellent LiveWall test bed specific to law enforcement. This partnership made it possible to test the LiveWall concept with scenarios involving the many facets of the law enforcement work done by SPD. PNNL and SPD agreed that integrating the systems into operations for a real event would be the best test of the technology and give SPD staff greater visibility into the functionality and benefits offered by the LiveWall concept.

Barr, Jonathan L.; Burtner, Edwin R.; Stein, Steven L.

2013-10-01T23:59:59.000Z

353

A Materials Facilities Initiative -  

E-Print Network (OSTI)

10, G11, G12, G13 Greenwald report identified area of Plasma-wall interactions, where investments to the surface leads to increased surface morphology changes and hence influences: Surface area; Surface to unipoloar arcing) and possibly create W dust of nm size M. Tokitani et al., Nucl. Fusion 51 (2011) 102001 M

354

Coated ceramic breeder materials  

DOE Patents (OSTI)

A breeder material for use in a breeder blanket of a nuclear reactor is disclosed. The breeder material comprises a core material of lithium containing ceramic particles which has been coated with a neutron multiplier such as Be or BeO, which coating has a higher thermal conductivity than the core material.

Tam, Shiu-Wing (Downers Grove, IL); Johnson, Carl E. (Elk Grove, IL)

1987-01-01T23:59:59.000Z

355

Dental Materials BIOMATERIALS  

E-Print Network (OSTI)

focus is on the development of two standard methods: one for a material's resistance to microleakage will quantify a significant portion of a material's ability to resist secondary caries. The methodsDental Materials BIOMATERIALS Our goal is to provide reference materials and clinically relevant

356

Hydrogen Compatibility of Materials  

Energy.gov (U.S. Department of Energy (DOE))

Presentation slides from the Energy Department webinar, Hydrogen Compatibility of Materials, held August 13, 2013.

357

Computational Chemical Materials Engineering  

E-Print Network (OSTI)

: Thermal barrier coatings, wear resistance coatings, radiation resistant materials · Materials for opticalHome Computational Chemical and Materials Engineering Tahir Cagin Chemical Engineering Department to understand behavior and properties of materials as a function of ­ Chemical constitution ­ Composition

358

Puncture detecting barrier materials  

DOE Patents (OSTI)

A method and apparatus for continuous real-time monitoring of the integrity of protective barrier materials, particularly protective barriers against toxic, radioactive and biologically hazardous materials has been developed. Conductivity, resistivity or capacitance between conductive layers in the multilayer protective materials is measured by using leads connected to electrically conductive layers in the protective barrier material. The measured conductivity, resistivity or capacitance significantly changes upon a physical breach of the protective barrier material. 4 figs.

Hermes, R.E.; Ramsey, D.R.; Stampfer, J.F.; Macdonald, J.M.

1998-03-31T23:59:59.000Z

359

The Uniaxial Tensile Response of Porous and Microcracked Ceramic Materials  

SciTech Connect

The uniaxial tensile stress-strain behavior of three porous ceramic materials was determined at ambient conditions. Test specimens in the form of thin beams were obtained from the walls of diesel particulate filter honeycombs and tested using a microtesting system. A digital image correlation technique was used to obtain full-field 2D in-plane surface displacement maps during tensile loading, and in turn, the 2D strains obtained from displacement fields were used to determine the Secant modulus, Young s modulus and initial Poisson s ratio of the three porous ceramic materials. Successive unloading-reloading experiments were performed at different levels of stress to decouple the linear elastic, anelastic and inelastic response in these materials. It was found that the stress-strain response of these materials was non-linear and that the degree of nonlinearity is related to the initial microcrack density and evolution of damage in the material.

Pandey, Amit [ORNL; Shyam, Amit [ORNL; Watkins, Thomas R [ORNL; Lara-Curzio, Edgar [ORNL; Lara-Curzio, Edgar [ORNL; Stafford, Randall [Cummins, Inc; Hemker, Kevin J [Johns Hopkins University

2014-01-01T23:59:59.000Z

360

Anomalous conductivity in Hall thrusters: Effects of the non-linear coupling of the electron-cyclotron drift instability with secondary electron emission of the walls  

SciTech Connect

With the help of an implicit particle-in-cell code, we have shown in a previous paper that the electron-cyclotron drift instability was able to induce anomalous conductivity as well as anomalous heating. As such it can be a major actor among the mechanisms involved in the operation of Hall thrusters. However, experimental results show that the nature of wall material has a significant effect on the behavior of the thruster. The purpose of this paper is to study the plasma-wall interaction in the case where the plasma is heated self-consistently by electrostatic fluctuations induced by the electron-cyclotron drift instability.

Hron, A.; Adam, J. C. [Centre de physique thorique, CNRS-Ecole Polytechnique, 91128 Palaiseau Cedex (France)] [Centre de physique thorique, CNRS-Ecole Polytechnique, 91128 Palaiseau Cedex (France)

2013-08-15T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Reliability Analysis of Brittle, Thin Walled Structures  

SciTech Connect

One emerging application for ceramics is diesel particulate filters being used order to meet EPA regulations going into effect in 2008. Diesel particulates are known to be carcinogenic and thus need to be minimized. Current systems use filters made from ceramics such as mullite and corderite. The filters are brittle and must operate at very high temperatures during a burn out cycle used to remove the soot buildup. Thus the filters are subjected to thermal shock stresses and life time reliability analysis is required. NASA GRC has developed reliability based design methods and test methods for such applications, such as CARES/Life and American Society for Testing and Materials (ASTM) C1499 Standard Test Method for Equibiaxial Strength of Ceramics.

Jonathan A Salem and Lynn Powers

2007-02-09T23:59:59.000Z

362

Composite materials for fusion applications  

SciTech Connect

Ceramic matrix composites, CMCs, are being considered for advanced first-wall and blanket structural applications because of their high-temperature properties, low neutron activation, low density and low coefficient of expansion coupled with good thermal conductivity and corrosion behavior. This paper presents a review and analysis of the hermetic, thermal conductivity, corrosion, crack growth and radiation damage properties of CMCs. It was concluded that the leak rates of a gaseous coolant into the plasma chamber or tritium out of the blanket could exceed design criteria if matrix microcracking causes existing porosity to become interconnected. Thermal conductivities of unirradiated SiC/SiC and C/SiC materials are about 1/2 to 2/3 that of Type 316 SS whereas the thermal conductivity for C/C composites is seven times larger. The thermal stress figure-of-merit value for CMCs exceeds that of Type 316 SS for a single thermal cycle. SiC/SiC composites are very resistant to corrosion and are expected to be compatible with He or Li coolants if the O{sub 2} concentrations are maintained at the appropriate levels. CMCs exhibit subcritical crack growth at elevated temperatures and the crack velocity is a function of the corrosion conditions. The radiation stability of CMCs will depend on the stability of the fiber, microcracking of the matrix, and the effects of gaseous transmutation products on properties. 23 refs., 14 figs., 1 tab.

Jones, R.H.; Henager, C.H. Jr.; Hollenberg, G.W.

1991-10-01T23:59:59.000Z

363

Joining of dissimilar materials  

DOE Patents (OSTI)

A method of joining dissimilar materials having different ductility, involves two principal steps: Decoration of the more ductile material's surface with particles of a less ductile material to produce a composite; and, sinter-bonding the composite produced to a joining member of a less ductile material. The joining method is suitable for joining dissimilar materials that are chemically inert towards each other (e.g., metal and ceramic), while resulting in a strong bond with a sharp interface between the two materials. The joining materials may differ greatly in form or particle size. The method is applicable to various types of materials including ceramic, metal, glass, glass-ceramic, polymer, cermet, semiconductor, etc., and the materials can be in various geometrical forms, such as powders, fibers, or bulk bodies (foil, wire, plate, etc.). Composites and devices with a decorated/sintered interface are also provided.

Tucker, Michael C; Lau, Grace Y; Jacobson, Craig P

2012-10-16T23:59:59.000Z

364

Luminescence dosimetry using building materials and personal objects  

Science Journals Connector (OSTI)

......and examples of application to sites in the Former Soviet Union are...population affected by fallout from the Nevada test site(18,19). Recently, dose-reconstruction...attributed to fallout from the Nevada Test Site using building bricks as natural......

H. Y. Gksu; I. K. Bailiff

2006-09-01T23:59:59.000Z

365

Threats, design limits and design windows for laser IFE dry wall chambers  

E-Print Network (OSTI)

Threats, design limits and design windows for laser IFE dry wall chambers A. Rene´ Raffray-drive targets and a dry wall chamber. The dry wall must accommodate the ion and photon threat spectra from. The neutron energy is deposited deeper in the first wall and blanket and does not represent a major threat

Raffray, A. René

366

Improved Confinement in JET High {beta} Plasmas with an ITER-Like Wall  

E-Print Network (OSTI)

The replacement of the JET carbon wall (C-wall) by a Be/W ITER-like wall (ILW) has affected the plasma energy confinement. To investigate this, experiments have been performed with both the C-wall and ILW to vary the heating power over a wide range for plasmas with different shapes.

Challis, C D; Beurskens, M; Buratti, P; Delabie, E; Drewelow, P; Frassinetti, L; Giroud, C; Hawkes, N; Hobirk, J; Joffrin, E; Keeling, D; King, D B; Maggi, C F; Mailloux, J; Marchetto, C; McDonald, D; Nunes, I; Pucella, G; Saarelma, S; Simpson, J

2015-01-01T23:59:59.000Z

367

IN-SITU MEASUREMENT OF WALL THERMAL PERFORMANCE: DATA INTERPRETATION AND APPARATUS DESIGN RECOMMENDATIONS  

E-Print Network (OSTI)

Unit (ETTU): Field Measurement of Wall Performance, Presented at Third International Symposium on Energy

Modera, M.P.; Sherman, M.H.; de Vinuesa, S.G.

2008-01-01T23:59:59.000Z

368

Sensors & Materials | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Sensors and Materials Argonne uses its materials and engineering expertise to develop, test, and deploy sensors and materials to detect nuclear and radiological materials, chemical...

369

Comprehensive Nuclear Materials  

SciTech Connect

This book encompasses a rich seam of current information on the vast and multidisciplinary field of nuclear materials employed in fission and prototype fusion systems. Discussion includes both historical and contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds leading scientists and engineers. Synthesizes pertinent current science to support the selection, assessment, validation and engineering of materials in extreme nuclear environments. The work discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials.

Konings, Dr. Rudy J. M. [European Commission Joint Research Centre; Allen, Todd R. [University of Wisconsin, Madison; Stoller, Roger E [ORNL; Yamanaka, Prof. Shinsuke [Osaka University

2012-01-01T23:59:59.000Z

370

Constraints on target chamber first wall and target designs that will enable NIF debris shields to survive  

SciTech Connect

The National Ignition Facility target chamber interior materials and target designs themselves have to be compatible with survival of the final-optics debris shields. To meet the planned maintenance and refinishing rate, the contamination of the debris shields cannot exceed about 1 nm equivalent thickness per shot of total material. This implies that the target mass must be limited to no more than 1 gram and the ablated mass released to the chamber from all other components must not exceed 3 grams. In addition, the targets themselves must either completely vaporize or send any minor amounts of shrapnel towards the chamber waist to prevent excessive cratering of the debris shields. The constraints on the first-wall ablation require that it be louvered to provide passive collection of remobilized contamination, because the expected target debris will remobilize at a rate fast enough to require cleaning every 3 weeks, about three times more frequent than possible with planned robotics. Furthermore, a comparison of ablatants from B{sub 4}C and stainless-steel louvers suggests that remobilization of target debris by x rays will be greater than of the base material in both cases, thereby reducing the performance advantage of clean B{sub 4}C over much-cheaper stainless steel. Neutronics calculations indicate that activation of thin Ni-free stainless steel is not a significant source of maintenance personnel radiation dose. Consequently, the most attractive first wall design consists of stainless-steel louvers. Evaluation of various unconverted-light beam dump designs indicates that stainless steel louvers generate no more debris than other materials, so one single design can serve as both first wall and beam dumps, eliminating beam steering restrictions caused by size and location of the beam dumps. One reservation is that the allowable contamination rate of the debris shield is not yet completely understood.

Hibbard,W.; Burnham, A. K.; Curran, D. R; Genin, F. Y.; Gerassimenko, M.; Latkowski, J. F.; Peterson, P. F.; Scott, J. M.; Tokheim, R. E.; Whitman, P. K.

1998-07-09T23:59:59.000Z

371

Installation of a Plasmatron at the Belgian Nuclear Research Centre and its Use for Plasma-Wall Interaction Studies  

SciTech Connect

In JET and ITER, the first wall will be covered by beryllium and a full or partial W divertor will be common. In DEMO, only high-Z, low erosion material such as tungsten will be present as a plasma facing material. In present day tokamaks, the very high fluence/low temperature plasma cannot be obtained. Important key issues to be resolved according to plasma wall interaction studies are the tritium retention, dust production, resilience to large steady-state fluences, transient loads, surface erosion, material redeposition and neutron damage. Some linear plasma simulators come close to the very high fluences expected in ITER and DEMO such as PSI -2; PISCES-B; NAGDIS-II and pilot-PSI. In future the larger device MAGNUM-PSI will have even higher fluences and lower temperatures for large scale components. The plasmatron facility VISION I to be installed in Mol, will have the capability to investigate mixed materials (with beryllium/tritium contaminations) and in the long term neutron activated samples. The ETHEL plasmatron VISION I from JRC-Ispra was transferred to SCKCEN (Mol, Belgium) recently. The equipment is meant to study plasma-wall interaction, in particular the interaction with hydrogen isotopes. The facility is capable to produce relatively cold self-sustained volumetric plasmas with a high plasma flux density at the target of about 10{sup 20}-10{sup 21} ions/m{sup 2} .s. The plasmatron has a volume of 18 litres, a target diameter of {approx}25 cm and modular ion energies in the range of 20-500 eV.

Uytdenhouwen, I. [SCKCEN, Belgian Nuclear Research Centre, Euratom Association, Boeretang 200, 2400 Mol (Belgium); Department of Applied Physics, Ghent University, Rozier 44, 9000 Ghent (Belgium); Schuurmans, J.; Decreton, M.; Massaut, V. [SCKCEN, Belgian Nuclear Research Centre, Euratom Association, Boeretang 200, 2400 Mol (Belgium); Oost, G. van [Department of Applied Physics, Ghent University, Rozier 44, 9000 Ghent (Belgium)

2008-04-07T23:59:59.000Z

372

ARM - Public Information Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

govPublicationsPublic Information Materials govPublicationsPublic Information Materials Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Public Information Materials The ARM Climate Research Facility develops public information materials to communicate the purpose and objectives of the program to general audiences. These materials are designed to increase awareness of ARM Climate Research Facility goals and to document its scientific results to a lay audience. Public information materials include fact sheets, brochures, CDs, videos, press releases, and information packets. Approved materials are made

373

Materials/Condensed Matter  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials/Condensed Matter Print Materials/Condensed Matter Print Materials research provides the foundation on which the economic well being of our high-tech society rests. The impact of advanced materials ranges dramatically over every aspect of our modern world from the minutiae of daily life to the grand scale of our national economy. Invariably, however, breakthroughs to new technologies trace their origin both to fundamental research in the basic properties of condensed matter and to applied research aimed at manipulating properties (structural, physical, chemical, electrical, magnetic, optical, etc.). Increasingly, the frontiers of materials research include materials that are "strongly correlated," characterized by strong coupling between a material's electrons with other electrons, magnetism, or the material lattice itself. This coupling often results in novel behavior, such as superconductivity, that may lead to technologically important applications.

374

Nanostructured composite reinforced material  

DOE Patents (OSTI)

A family of materials wherein nanostructures and/or nanotubes are incorporated into a multi-component material arrangement, such as a metallic or ceramic alloy or composite/aggregate, producing a new material or metallic/ceramic alloy. The new material has significantly increased strength, up to several thousands of times normal and perhaps substantially more, as well as significantly decreased weight. The new materials may be manufactured into a component where the nanostructure or nanostructure reinforcement is incorporated into the bulk and/or matrix material, or as a coating where the nanostructure or nanostructure reinforcement is incorporated into the coating or surface of a "normal" substrate material. The nanostructures are incorporated into the material structure either randomly or aligned, within grains, or along or across grain boundaries.

Seals, Roland D. (Oak Ridge, TN); Ripley, Edward B. (Knoxville, TN); Ludtka, Gerard M. (Oak Ridge, TN)

2012-07-31T23:59:59.000Z

375

Earth-Abundant Materials  

Energy.gov (U.S. Department of Energy (DOE))

DOE funds research into Earth-abundant materials for thin-film solar applications in response to the issue of materials scarcity surrounding other photovoltaic (PV) technologies. Below are a list...

376

Geopolymer Sealing Materials  

Energy.gov (U.S. Department of Energy (DOE))

DOE Geothermal Peer Review 2010 - Presentation. Project objectives: Develop and characterize field-applicable geopolymer temporary sealing materials in the laboratory and to transfer this developed material technology to geothermal drilling service companies as collaborators for field validation tests.

377

Applications of Ceramic Materials  

Science Journals Connector (OSTI)

The use of ceramic materials in science and industry is becoming increasingly widespread. As discussed in Chap. 4, ceramic materials have important advantages over metals and polymers in electronic devices at ...

Murat Bengisu

2001-01-01T23:59:59.000Z

378

Nanocomposites as thermoelectric materials  

E-Print Network (OSTI)

Thermoelectric materials have attractive applications in electric power generation and solid-state cooling. The performance of a thermoelectric device depends on the dimensionless figure of merit (ZT) of the material, ...

Hao, Qing

2010-01-01T23:59:59.000Z

379

Materials Science & Engineering  

E-Print Network (OSTI)

and Forensics team in the Polymers and Coatings Group, MST-7. He graduated from the University of Toledo, aerogels, carbon fiber composites, damaged materials, and low density materials examining defects

380

LANL: Materials Science Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Laboratory (MSL) is Materials Science Laboratory (MSL) is an interdisciplinary facility dedicated to research on current materials and those of future interest. It is a 56,000 square-foot modern facility that can be easily reconfigured to accom- modate new processes and operations. It compris- es 27 laboratories, 15 support rooms, and 60 offices. The MSL supports many distinct materi- als research topics, grouped into four focus areas: mechanical behavior, materials processing, syn- thesis, and characterization. Research within the MSL supports programs of national interest in defense, energy, and the basic sciences. The MSL is a non-classified area in the Materials Science Complex in close proximity to classified and other non-classified materials research facilities. The Materials Science

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Functionalized apertures for the detection of chemical and biological materials  

DOE Patents (OSTI)

Disclosed are nanometer to micron scale functionalized apertures constructed on a substrate made of glass, carbon, semiconductors or polymeric materials that allow for the real time detection of biological materials or chemical moieties. Many apertures can exist on one substrate allowing for the simultaneous detection of numerous chemical and biological molecules. One embodiment features a macrocyclic ring attached to cross-linkers, wherein the macrocyclic ring has a biological or chemical probe extending through the aperture. Another embodiment achieves functionalization by attaching chemical or biological anchors directly to the walls of the apertures via cross-linkers.

Letant, Sonia E. (Livermore, CA); van Buuren, Anthony W. (Livermore, CA); Terminello, Louis J. (Danville, CA); Thelen, Michael P. (Danville, CA); Hope-Weeks, Louisa J. (Brentwood, CA); Hart, Bradley R. (Brentwood, CA)

2010-12-14T23:59:59.000Z

382

Instructions and Materials  

Energy.gov (U.S. Department of Energy (DOE))

The following are 2012 Program Peer Review Meeting instructions, materials and resource links for presenters and reviewers.

383

"Seismic Behavior and Design of Steel Shear Walls", A. Astaneh-Asl, SEAONC Seminar, November 2001, San Francisco. of 181 Seismic Behavior and Design of Steel Shear Walls  

E-Print Network (OSTI)

"Seismic Behavior and Design of Steel Shear Walls", A. Astaneh-Asl, SEAONC Seminar, November 2001, San Francisco. of 181 Seismic Behavior and Design of Steel Shear Walls By Abolhassan Astaneh-Asl, Ph.ce.berkeley.edu/~astaneh Introduction Steel plate shear wall systems have been used in recent years in highly seismic areas to resist

Astaneh-Asl, Abolhassan

384

D-brane construction for non-Abelian walls  

SciTech Connect

Supersymmetric U(N{sub C}) gauge theory with N{sub F} massive hypermultiplets in the fundamental representation is given by the brane configuration made of N{sub C} fractional Dp-branes stuck at the Z{sub 2} orbifold singularity on N{sub F} separated D(p+4)-branes. We show that non-Abelian walls in this theory are realized as kinky fractional Dp-branes interpolating between D(p+4)-branes. Wall solutions and their duality between N{sub C} and N{sub F}-N{sub C} imply extensions of the s-rule and the Hanany-Witten effect in brane dynamics. We also find that the reconnection of fractional D-branes occurs in this system. Diverse phenomena in non-Abelian walls found in field theory can be understood very easily by this brane configuration.

Eto, Minoru; Isozumi, Youichi; Nitta, Muneto; Ohashi, Keisuke; Ohta, Kazutoshi; Sakai, Norisuke [Department of Physics, Tokyo Institute of Technology, Tokyo 152-8551 (Japan); Theoretical Physics Laboratory, the Institute of Physical and Chemical Research (RIKEN), 2-1 Hirosawa, Wako, Saitama 351-0198 (Japan)

2005-06-15T23:59:59.000Z

385

Spin alignment of dark matter haloes in filaments and walls  

E-Print Network (OSTI)

The MMF technique is used to segment the cosmic web as seen in a cosmological N-body simulation into wall-like and filament-like structures. We find that the spins and shapes of dark matter haloes are significantly correlated with each other and with the orientation of their host structures. The shape orientation is such that the halo minor axes tend to lie perpendicular to the host structure, be it a wall or filament. The orientation of the halo spin vector is mass dependent. Low mass haloes in walls and filaments have a tendency to have their spins oriented within the parent structure, while higher mass haloes in filaments have spins that tend to lie perpendicular to the parent structure.

Miguel A. Aragn-Calvo; Rien van de Weygaert; Bernard J. T. Jones; J. M. Thijs van der Hulst

2006-10-09T23:59:59.000Z

386

Wall Adhesion and Constitutive Modelling of Strong Colloidal Gels  

E-Print Network (OSTI)

Wall adhesion effects during batch sedimentation of strongly flocculated colloidal gels are commonly assumed to be negligible. In this study in-situ measurements of colloidal gel rheology and solids volume fraction distribution suggest the contrary, where significant wall adhesion effects are observed in a 110mm diameter settling column. We develop and validate a mathematical model for the equilibrium stress state in the presence of wall adhesion under both viscoplastic and viscoelastic constitutive models. These formulations highlight fundamental issues regarding the constitutive modeling of colloidal gels, specifically the relative utility and validity of viscoplastic and viscoelastic rheological models under arbitrary tensorial loadings. The developed model is validated against experimental data, which points toward a novel method to estimate the shear and compressive yield strength of strongly flocculated colloidal gels from a series of equilibrium solids volume fraction profiles over various column widths.

Daniel R. Lester; Richard Buscall; Anthony D. Stickland; Peter J. Scales

2013-12-30T23:59:59.000Z

387

Studies of Resistive Wall Heating at JLAB FEL  

SciTech Connect

When the JLAB FEL is under CW operation, it had been observed that temperature rises over the wiggler vacuum chamber, presumably as the result of the power deposition on the resistive wall of the wiggler chamber. Previous analyses have been done on the resistive wall impedance for various cases, such as DC, AC, and anomalous skin effects*. Here we report an investigation on the beam kinetic energy losses for each of these cases. This study includes the non-ultrarelativistic effect on resistive wall loss, for both round pipe and parallel plates. We will present the comparison of our results with the measured data obtained during CW operation of the JLAB FEL. Other possible factors contributing to the measured heating will also be discussed.

Li, Rui; Benson, Stephen V.

2013-06-01T23:59:59.000Z

388

Why engineer porous materials?  

Science Journals Connector (OSTI)

...thermal conductivity materials (Maex et al. 2003...Hrubesh et al. 1993); materials remarkably similar to...reduce the oxygen at the cathode and oxidize the fuel...electrochemically active, have large surface...volume fraction of porous materials about 0.3 (Brandon...

2006-01-01T23:59:59.000Z

389

Critical Materials Workshop  

Energy.gov (U.S. Department of Energy (DOE))

AMO hosted a public workshop on Tuesday, April 3, 2012 in Arlington, VA to provide background information on critical materials assessment, the current research within DOE related to critical materials, and the foundational aspects of Energy Innovation Hubs. Additionally, the workshop solicited input from the critical materials community on R&D gaps that could be addressed by DOE.

390

Earth melter with rubble walls and method of use  

DOE Patents (OSTI)

The present invention is an improvement to the earth melter described and claimed in U.S. Pat. No. 5,443,618. The improvement is the use of rubble for retaining walls. More specifically, the retaining walls rest on ground level and extend above ground level piling rubble around a melt zone. A portion of the melter may be below grade wherein sidewalls are formed by the relatively undisturbed native soil or rock, and the rubble may be used as a backfill liner for the below grade sidewalls.

Chapman, Chris C. (Richland, WA)

1998-01-01T23:59:59.000Z

391

Effect of Trapped Energetic Particles on the Resistive Wall Mode  

SciTech Connect

A stability analysis for the resistive wall mode is studied in the presence of trapped energetic particles (EPs). When the EPs' beta exceeds a critical value, a fishbonelike bursting mode (FLM) with an external kink eigenstructure can exist. This offers the first analytic interpretation of the experimental observations [Phys. Rev. Lett. 103, 045001 (2009)]. The mode-particle resonances for the FLM and the q=1 fishbone occur in different regimes of the precession frequency of EPs. In certain ranges of the plasma rotation speed and the EPs' beta, a mode conversion can occur between the resistive wall mode and FLM.

Hao, G. Z.; Wang, A. K.; Qiu, X. M. [Southwestern Institute of Physics, Post Office Box 432, Chengdu 610041 (China); Liu, Y. Q. [Euratom/CCFE Fusion Association, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom)

2011-07-01T23:59:59.000Z

392

Effective hydrogen storage in single-wall carbon nanotubes  

Science Journals Connector (OSTI)

The hydrogen-storage behavior of single-wall carbon nanotubes was studied using molecular dynamics simulations and ab initio electronic calculations. Hydrogen atoms with kinetic energy of 1625 eV were observed to penetrate into and be trapped inside the tube. Consecutively injected H atoms form hydrogen molecules, and gradually condense to become liquid hydrogen in the tube. The density of injected hydrogen in the tube and the pressure on the wall of the nanotube induced by the stored hydrogen molecules were evaluated at room temperature.

Yuchen Ma; Yueyuan Xia; Mingwen Zhao; Ruijin Wang; Liangmo Mei

2001-03-02T23:59:59.000Z

393

MHK Technologies/Water Wall Turbine | Open Energy Information  

Open Energy Info (EERE)

Turbine Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Water Wall Turbine.png Technology Profile Primary Organization Water Wall Turbine Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description WWTurbine has developed and introduced a new commercially viable system for the extraction of Potential and Kinetic Energy from large fast moving water currents for conversion into Electric Energy Mooring Configuration Monopile Optimum Marine/Riverline Conditions min current velocity of 2 m s Technology Dimensions Technology Nameplate Capacity (MW) 0 5 3 0 MW Device Testing

394

BPS domain wall junctions in infinitely large extra dimensions  

Science Journals Connector (OSTI)

We consider models of scalar fields coupled to gravity which are higher-dimensional generalizations of four dimensional supergravity. We use these models to describe domain wall junctions in an antide Sitter background. We derive Bogomolnyi equations for the scalar fields from which the walls are constructed and for the metric. From these equations a BPS-like formula for the junction energy can be derived. We demonstrate that such junctions localize gravity in the presence of more than one uncompactified extra dimension.

Sean M. Carroll; Simeon Hellerman; Mark Trodden

2000-07-27T23:59:59.000Z

395

Progress on a Cavity with Beryllium Walls for Muon Ionization Cooling Channel R&D.  

SciTech Connect

The Muon Accelerator Program (MAP) collaboration is working to develop an ionization cooling channel for muon beams. An ionization cooling channel requires the operation of high-gradient, normal-conducting RF cavities in multi-Tesla solenoidal magnetic fields. However, experiments conducted at Fermilab?s MuCool Test Area (MTA) show that increasing the solenoidal field strength reduces the maximum achievable cavity gradient. This gradient limit is characterized by an RF breakdown process that has caused significant damage to copper cavity interiors. The damage may be caused by field-emitted electrons, focused by the solenoidal magnetic field onto small areas of the inner cavity surface. Local heating may then induce material fatigue and surface damage. Fabricating a cavity with beryllium walls would mitigate this damage due to beryllium?s low density, low thermal expansion, and high electrical and thermal conductivity. We address the design and fabrication of a pillbox RF cavity with beryllium walls, in order to evaluate the performance of high-gradient cavities in strong magnetic fields.

Bowring, D.L.; DeMello, A.J.; Lambert, A.R.; Li, D.; Virostek,, S.; Zisman, M.; Kaplan, D.; Palmer, R.B.

2012-05-20T23:59:59.000Z

396

Hydrogen Compatibility of Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Compatibility of Materials Compatibility of Materials August 13, 2013 DOE EERE Fuel Cell Technologies Office Webinar Chris San Marchi Sandia National Laboratories Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000 SAND2013-6278P 2 Webinar Objectives * Provide context for hydrogen embrittlement and hydrogen compatibility of materials - Distinguish embrittlement, compatibility and suitability - Examples of hydrogen embrittlement * Historical perspective - Previous work on hydrogen compatibility - Motivation of "Materials Guide" * Identify the landscape of materials compatibility documents

397

NEWTON's Material Science Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Archive: Materials Science Archive: Loading Most Recent Materials Science Questions: Hydrogen Compounds and Heat Conduction Weaving Carbon Nanotubes Metal as Electrical Conductor, Not Thermal Steel Changes with Age PETE, Ultraviolet Light, Benefits Strength of Yarn by Spinning Each Substance Unique Density Alloy versus Constituent Density Knowing When Material is Melted Crystalline Metal Versus Metallic Glass and Conduction Super Glue, Surgery, and Skin Silica Gel Teflon Non-Stick Property Salt Crystal Formation Lubricating Rubber Bands and Elasticity Materials for Venus Probe Crystalline Solids and Lowest Energy Sodium Polycarbonate and Salt Water Early Adhesives Surface Energy and Temperature Separating Polypropylene, Polyester, and Nylon Factors Effecting Polymer Flexibility

398

Tailored Porous Materials  

SciTech Connect

Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

BARTON,THOMAS J.; BULL,LUCY M.; KLEMPERER,WALTER G.; LOY,DOUGLAS A.; MCENANEY,BRIAN; MISONO,MAKOTO; MONSON,PETER A.; PEZ,GUIDO; SCHERER,GEORGE W.; VARTULI,JAMES C.; YAGHI,OMAR M.

1999-11-09T23:59:59.000Z

399

Small Business Harnessing Solar Energy with Building Materials | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small Business Harnessing Solar Energy with Building Materials Small Business Harnessing Solar Energy with Building Materials Small Business Harnessing Solar Energy with Building Materials April 26, 2010 - 5:15pm Addthis A balcony in New York where BIPV was used. | Photo courtesy Applied PV A balcony in New York where BIPV was used. | Photo courtesy Applied PV Joshua DeLung Business partners Jeff Szczepanski and Rob Lyndall imagine a world where many of the buildings have walls, windows and other materials that are integrated with photovoltaic technology - that is, buildings that generate solar energy without necessarily adding panels to the roof. And because of new funding opportunities, that vision might not be too far into the future. Applied Photovoltaics, located in Pennington, N.J., will manufacture solar energy modules for use in building-integrated photovoltaics. The company

400

Small Business Harnessing Solar Energy with Building Materials | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small Business Harnessing Solar Energy with Building Materials Small Business Harnessing Solar Energy with Building Materials Small Business Harnessing Solar Energy with Building Materials April 26, 2010 - 5:15pm Addthis A balcony in New York where BIPV was used. | Photo courtesy Applied PV A balcony in New York where BIPV was used. | Photo courtesy Applied PV Joshua DeLung Business partners Jeff Szczepanski and Rob Lyndall imagine a world where many of the buildings have walls, windows and other materials that are integrated with photovoltaic technology - that is, buildings that generate solar energy without necessarily adding panels to the roof. And because of new funding opportunities, that vision might not be too far into the future. Applied Photovoltaics, located in Pennington, N.J., will manufacture solar energy modules for use in building-integrated photovoltaics. The company

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Hygrothermal performance of EIFS-clad walls: Effect of vapor diffusion and air leakage on the drying of construction moisture [Exterior Insulation and Finish Systems  

SciTech Connect

Hydrothermal performance describes the response of the material layers that make up the wall to thermal and moisture loads. Modeling can be applied to determine the drying and wetting potential of walls with various initial construction moisture loads and to test alternative innovations. This paper investigates the drying performance of a particular barrier EIFS clad wall as a function of vapor diffusion control with a specific air leakage path. This investigation was conducted with constant interior temperature and relative humidity. The LATENITE model, developed at NRD, is employed in the investigation. This advanced hydrothermal model can incorporate system and sub-system performances by introducing simulated defects and wall system details derived from laboratory and field measurements. Moisture loads available to the EIFS structure originating either from the interior, the exterior or from initial construction moisture can be included. In this paper the authors present a study to determine the drying potential of a barrier EIFS clad wall for the climate of Wilmington, NC. This climate is characterized by the ASHRAE Handbook of Fundamentals as being mixed. The effect of drying and wetting by airflow was investigated by introducing airflow paths. Hydrothermal performance with three different vapor diffusion control strategies and two air leakage conditions was simulated for a period of one year. Initial oriented strand board (OSB) moisture content was assumed to be very high. The influence of rain water, solar radiation and air movement within the cavity was included in the analysis.

Karagiozis, A.N.; Salonvaara, M.H.

1999-07-01T23:59:59.000Z

402

Method of controlling the side wall thickness of a turbine nozzle segment for improved cooling  

DOE Patents (OSTI)

A gas turbine nozzle segment has outer and inner bands and a vane extending therebetween. Each band has a side wall, a cover and an impingement plate between the cover and nozzle wall defining two cavities on opposite sides of the impingement plate. Cooling steam is supplied to one cavity for flow through apertures of the impingement plate to cool the nozzle wall. The side wall of the band has an inturned flange defining with the nozzle wall an undercut region. The outer surface of the side wall is provided with a step prior to welding the cover to the side wall. A thermal barrier coating is applied in the step and, after the cover is welded to the side wall, the side wall is finally machined to a controlled thickness removing all, some or none of the coating.

Burdgick, Steven Sebastian (Schenectady, NY)

2002-01-01T23:59:59.000Z

403

Materials Science Division - Argonne National Laboratories, Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Home About MSD Information Awards Visit MSD Administrative Staff Division Personnel Research Research Groups Condensed Matter Theory Emerging Materials Energy Conversion and Storage Magnetic Films Molecular Materials Neutron and X-ray Scattering Superconductivity and Magnetism Surface Chemistry Synchrotron Radiation Studies Threat Detection and Analysis Group Research Areas Careers in MSD Internal Sites Search Front Slide 1 November 2013 - Patricia Dehmer (second from right), Deputy Director of Science Programs, DOE Office of Science, joined Argonne Director Eric Isaacs(left) and Associate Laboratory Director for Physical Sciences and Engineering Peter Littlewood(second from left) to tour the recently-opened Energy Sciences Building. Among Dehmer's stops was the crystal growth

404

Process for safe underground storage of materials and apparatus for storage of such materials  

SciTech Connect

A method is disclosed for the formation of a safe storage area to hold materials, where the storage area is in the form of an underground storage cavern in a preferably rock formation maintained at a different temperature from the natural temperature of the environs surrounding the walls, floor, and the ceiling of said storage cavern. The inside of the storage cavern is with or without insulation and an inner first circulation system surrounds the cavern. The circulation system has a plurality of channels regularly distributed around the cavern and near its surface parallel to the axis of the storage space. The system of tunnels formed of the channels together encloses and surrounds the cavern. Further away from the cavern and on the outside of and in working relation to the first inner circulation system is a second outer circulation system, consisting of a plurality of regularly distributed channels formed either from the said inner tunnel system or between a second outer system of surrounding tunnels parallel to the axis of the storage space and together with said last mentioned channels enclosing the cavern and the inner circulation system. A circulating drying heat exchange medium for exchanging heat between the circulating medium and the surroundings around the first inner circulation system is introduced into the first inner circulation system and a circulating heat exchange drying medium for exchanging heat between the circulating medium and the surroundings around the second outer circulation system is also employed by maintaining heat exchange with the surroundings of first inner circulation system keeping its walls, floor, and ceiling of the cavern at a predetermined temperature above a temperature of the stored materials when storing hot materials below the temperature of the hot materials to form a temperature barrier envelope about said cavern.

Grennard, A.H.

1980-09-30T23:59:59.000Z

405

Closure Report for Corrective Action Unit 392: Spill Sites and Construction Materials, Nevada Test Site, Nevada  

SciTech Connect

This Closure Report documents the closure activities that were conducted to close Corrective Action Unit (CAU) 392--Spill Sites and Construction Materials located on the Nevada Test Site (NTS). CAU 392 is listed on in Appendix III of the Federal Facility Agreement and Consent Order (FFACO) (FFACO, 1996) and consists of the following six Corrective Action Sites (CASs) located in Areas 5 and 6 of the NTS: CAS 05-17-02 Construction Materials/Lead Bricks; CAS 06-17-03 Cement Mud Pit; CAS 06-1 9-01 Cable Pile; Powder Piles (3); CAS 06-44-02 Paint Spill; CAS 06-44-03 Plaster Spill; CAS 06-44-04 Cutting Fluid Discharge Ditch. Closure activities were performed in two phases. Phase 1 activities consisted of collecting waste characterization samples of soil and material present on-site, and where appropriate, performing radiological screening of debris at the six CASs. Results were used to determine how waste generated during closure activities would be handled and disposed of, i.e., as nonhazardous sanitary or hazardous waste, etc. Phase 2 activities consisted of closing each CAS by removing debris and/or soil, disposing of the generated waste, and verifying that each CAS was clean closed by visual inspection and/or by the collecting soil verification samples for laboratory analysis. Copies of the analytical results for the site verification samples are included in Appendix A. Copies of the Sectored Housekeeping Site Closure Verification Form for each of the six CASs are included in Appendix 8. Appendix C contains a copy of the Bechtel Nevada (BN) On-site Waste Transport Manifest for the hazardous waste generated during closure of CAS 06-44-02.

R. B. Jackson

2002-02-01T23:59:59.000Z

406

Mass production of multi-wall carbon nanotubes by metal dusting process with high yield  

SciTech Connect

Research highlights: {yields} Synthesis of carbon nanotubes over Fe-Ni nanoparticles supported alloy 304L. {yields} Production of carbon nanotubes with high yield (700-1000%) and low cost catalyst. {yields} Optimum growth condition is CO/H{sub 2} = 1/1, 100 cm{sup 3}/min, at 620 {sup o}C under long term repetitive thermal cycling. {yields} Possibility of the mass production by metal dusting process with low cost. -- Abstract: Carbon nanotube materials were synthesized over Fe-Ni nanoparticles generated during disintegration of the surface of alloy 304L under metal dusting environment. The metal dusting condition was simulated and optimized through exposing stainless steel samples during long term repetitive thermal cycling in CO/H{sub 2} = 1/1, total gas flow rate 100 cm{sup 3}/min, at 620 {sup o}C for 300 h. After reaction, surface morphology of the samples and also carbonaceous deposition which had grown on sample surfaces were examined by stereoscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Results revealed that multi-wall carbon nanotubes could be formed over nanocatalyst generated on the alloy surface by exploiting metal dusting process. By optimization of reaction parameters the yields of carbon nanotube materials obtained were 700-1000%. Also it has been shown herein that the amount of carbon nanotube materials remarkably increases when the reaction time is extended up to 300 h, indicating a possibility of the mass production by this easy method.

Ghorbani, H. [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of)] [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of); Rashidi, A.M., E-mail: Rashidiam@ripi.ir [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, P.O. Box 14665-1998, Tehran (Iran, Islamic Republic of); Rastegari, S.; Mirdamadi, S. [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of)] [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of); Alaei, M. [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, P.O. Box 14665-1998, Tehran (Iran, Islamic Republic of)] [Nanotechnology Research Center, Research Institute of Petroleum Industry (RIPI), West Blvd. Azadi Sport Complex, P.O. Box 14665-1998, Tehran (Iran, Islamic Republic of)

2011-05-15T23:59:59.000Z

407

General formulation of the resistive wall mode coupling equations  

SciTech Connect

A theoretical framework to describe the magnetic coupling of the toroidal plasma with the resistive wall and other sources of the field asymmetry is formulated. This is done for general toroidal geometry without restrictions on the plasma, while the wall is considered as a thin shell. Mathematically, the approach here exploits the Chance concept [M. S. Chance, Phys. Plasmas 4, 2161 (1997)], but with an essential difference: each source of the magnetic perturbation b (plasma, wall, external currents) is treated separately with account of their differences in space and nature. This allows much simpler formulation of the problem than was known before. The final equation couples the normal component of {partial_derivative}b/{partial_derivative}t at the wall to the perturbation at the plasma surface. Step by step reduction of this first-principle equation is performed with demonstration of its main features, starting from the known problem of singularities. This also includes the reduction to axially symmetric geometry, large-aspect-ratio, and the cylindrical limits. In the latter case, the known 'cylindrical' equation is reproduced, but now from the full 'toroidal' equations.

Pustovitov, V. D. [Nuclear Fusion Institute, Russian Research Centre 'Kurchatov Institute', Kurchatov Sq., 1, Moscow, 123182 (Russian Federation)

2008-07-15T23:59:59.000Z

408

Transpiring wall supercritical water oxidation reactor salt deposition studies  

SciTech Connect

Sandia National Laboratories has teamed with Foster Wheeler Development Corp. and GenCorp, Aerojet to develop and evaluate a new supercritical water oxidation reactor design using a transpiring wall liner. In the design, pure water is injected through small pores in the liner wall to form a protective boundary layer that inhibits salt deposition and corrosion, effects that interfere with system performance. The concept was tested at Sandia on a laboratory-scale transpiring wall reactor that is a 1/4 scale model of a prototype plant being designed for the Army to destroy colored smoke and dye at Pine Bluff Arsenal in Arkansas. During the tests, a single-phase pressurized solution of sodium sulfate (Na{sub 2}SO{sub 4}) was heated to supercritical conditions, causing the salt to precipitate out as a fine solid. On-line diagnostics and post-test observation allowed us to characterize reactor performance at different flow and temperature conditions. Tests with and without the protective boundary layer demonstrated that wall transpiration provides significant protection against salt deposition. Confirmation tests were run with one of the dyes that will be processed in the Pine Bluff facility. The experimental techniques, results, and conclusions are discussed.

Haroldsen, B.L.; Mills, B.E.; Ariizumi, D.Y.; Brown, B.G. [and others

1996-09-01T23:59:59.000Z

409

Unified first wall-blanket structure for plasma device applications  

DOE Patents (OSTI)

A plasma device for use in controlling nuclear reactions within the plasma including a first wall and blanket formed in a one-piece structure composed of a solid solution containing copper and lithium and melting above about 500.degree. C.

Gruen, Dieter M. (Downers Grove, IL)

1987-01-01T23:59:59.000Z

410

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents (OSTI)

An instrument is described for the measurement of vacuum within sealed packets, the packets having a wall sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall, with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum reference plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A packet production line model is also described. 3 figures.

Kollie, T.G.; Thacker, L.H.; Fine, H.A.

1993-10-05T23:59:59.000Z

411

CP-Violating Profile of the Electroweak Bubble Wall  

Science Journals Connector (OSTI)

......November 1995 research-article Articles CP-Violating Profile of the Electroweak Bubble...electroweak baryogenesis, the profile of the CP violating bubble wall, created at the first-order...solutions. Two of them smoothly connect the CP-violating broken phase and the symmetric......

Koichi Funakubo; Akira Kakuto; Shoichiro Otsuki; Kazunori Takenaga; Fumihiko Toyoda

1995-11-01T23:59:59.000Z

412

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH  

E-Print Network (OSTI)

STEEL PLATE SHEAR WALL BUILDINGS: DESIGN REQUIREMENTS AND RESEARCH Michel Bruneau, P.E. 1 Dr. Bruneau is conducting research on the seismic evaluation and retrofit of existing steel bridges, steel of this research, and has co- authored the book "Ductile Design of Steel Structures" published in 1997 by Mc

Bruneau, Michel

413

Gravitational collapse and thermalization in the hard wall model  

E-Print Network (OSTI)

We study a simple example of holographic thermalization in a confining field theory: the homogeneous injection of energy in the hard wall model. Working in an amplitude expansion, we find black brane formation for sufficiently fast energy injection and a scattering wave solution for sufficiently slow injection. We comment on our expectations for more sophisticated holographic QCD models.

Ben Craps; Elias Kiritsis; Christopher Rosen; Anastasios Taliotis; Joris Vanhoof; Hongbao Zhang

2014-03-03T23:59:59.000Z

414

THE ELECTRONIC PROPERTIES OF MULTI-WALLED CARBON NANOTUBES  

E-Print Network (OSTI)

THE ELECTRONIC PROPERTIES OF MULTI-WALLED CARBON NANOTUBES A Thesis Submitted to the Faculty I #12;rst started. I also thank Michael Buss for his insight and for making my #12;rst nanotube family for the many yawns and blank stares at the mention of the word nanotube. At least they listened

415

Energy-momentum balance in particle - domain wall perforating collision  

E-Print Network (OSTI)

We investigate the energy-momentum balance in the perforating collision of a point particle with an infinitely thin planar domain wall within the linearized gravity in arbitrary dimensions. Since the metric of the wall increases with distance, the wall and the particle are never free, and their energy-momentum balance involves not only the instantaneous kinetic momenta, but also the non-local contribution of gravitational stresses. However, careful analysis shows that the stresses can be unambiguously divided between the colliding objects leading to definition of the gravitationally dressed momenta. These take into account for gravity in the same way as the potential energy does in the non-relativistic theory, but our treatment is fully relativistic. Another unusual feature of our problem is the non-vanishing flux of the total energy-momentum tensor through the lateral surface of the world tube. In this case the zero divergence of the energy-momentum tensor does not imply conservation of the total momentum defined as the integral over the space-like section of the tube. But one can still define the conservation low infinitesimally, passing to time derivatives of the momenta. Using this definition we establish the momentum balance in terms of the dressed particle and wall momenta.

D. V. Gal'tsov; E. Yu. Melkumova; P. A. Spiirin

2014-11-01T23:59:59.000Z

416

Flame/Wall interactions : laminar study of unburnt HC formation  

E-Print Network (OSTI)

for an important part to the sources of hydrocarbon (HC) emission in a combustion chamber. The aim of this work in gasoline engine. A skeletal mechanism (29 species and 48 reactions) mimicking iso-octane combustion is used, wall heat flux, quench distances as well as HC families are investigated by varying parameters like

Paris-Sud XI, Université de

417

Turbulence Structure and Wall Signature in Hypersonic Turbulent Boundary Layer  

E-Print Network (OSTI)

Turbulence Structure and Wall Signature in Hypersonic Turbulent Boundary Layer Yin-Chiu Kan , Clara and hypersonic turbulent boundary layer datasets from direct numerical simulation (DNS). Contour plots and Marusic5 and Mathis, Hutchins and Marusic16 ). In contrast to supersonic and hypersonic flow regimes

Martín, Pino

418

Turbulence Structure and Wall Signature in Hypersonic Boundary Layer  

E-Print Network (OSTI)

Turbulence Structure and Wall Signature in Hypersonic Boundary Layer Yin-Chiu Kan , Beekman Izaak and low- speed features, found in subsonic experiments, are present in our supersonic and hypersonic and hypersonic regimes due to the lack of detailed flow field data, and the studies have been mostly restricted

Martín, Pino

419

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents (OSTI)

An instrument for the measurement of vacuum within sealed packets 12, the packets 12 having a wall 14 that it can be deformed by the application of an external dynamic vacuum to an area thereof. The instrument has a detector head 18 for placement against the deformable wall 14 of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall 14, with this deformation or lift monitored by the application of light as via a bifurcated light pipe 20. Retro-reflected light through the light pipe is monitored with a photo detector 26. A change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the dynamic vacuum applied through the head be to achieve this initiation of movement is equal to the vacuum within the packet 12. In a preferred embodiment a vacuum plate 44 is placed beneath the packet 12 to ensure that no deformation occurs on the reverse surface 16 of the packet. A vacuum can be applied to a recess in this vacuum plate, the value of which can be used to calibrate the vacuum transducer in the detector head.

Kollie, Thomas G. (Oak Ridge, TN); Thacker, Louis H. (Knoxville, TN); Fine, H. Alan (Lexington, KY)

1995-01-01T23:59:59.000Z

420

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents (OSTI)

An instrument is disclosed for the measurement of vacuum within sealed packets, the packets having a wall that it can be deformed by the application of an external dynamic vacuum to an area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. A change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the dynamic vacuum applied through the head be to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A vacuum can be applied to a recess in this vacuum plate, the value of which can be used to calibrate the vacuum transducer in the detector head. 4 figs.

Kollie, T.G.; Thacker, L.H.; Fine, H.A.

1995-04-18T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Instrument for measurement of vacuum in sealed thin wall packets  

DOE Patents (OSTI)

An instrument for the measurement of vacuum within sealed packets 12, the packets 12 having a wall 14 sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head 18 for placement against the deformable wall 14 of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall 14, with this deformation or lift monitored by the application of light as via a bifurcated light pipe 20. Retro-reflected light through the light pipe is monitored with a photo detector 26. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head 18 to achieve this initiation of movement is equal to the vacuum Within the packet 12. In a preferred embodiment a vacuum reference plate 44 is placed beneath the packet 12 to ensure that no deformation occurs on the reverse surface 16 of the packet. A packet production line model is also described.

Kollie, Thomas G. (117 Oklahoma Ave., Oak Ridge, TN 37830); Thacker, Louis H. (3727 Frostwood Rd., Knoxville, TN 37921); Fine, H. Alan (949 Wishbone Cir., Lexington, KY 40502)

1993-01-01T23:59:59.000Z

422

Radial elasticity of multi-walled boron nitride nanotubes  

SciTech Connect

We investigated the radial mechanical properties of multi-walled boron nitride nanotubes (MW-BNNTs) using atomic force microscopy. The employed MW-BNNTs were synthesized using pressurized vapor/condenser (PVC) methods and were dispersed in aqueous solution using ultrasonication methods with the aid of ionic surfactants. Our nanomechanical measurements reveal the elastic deformational behaviors of individual BNNTs with two to four tube walls in their transverse directions. Their effective radial elastic moduli were obtained through interpreting their measured radial deformation profiles using Hertzian contact mechanics models. Our results capture the dependences of the effective radial moduli of MW-BNNTs on both the tube outer diameter and the number of tube layers. The effective radial moduli of double-walled BNNTs are found to be several-fold higher than those of single-walled BNNTs within the same diameter range. Our work contributes directly to a complete understanding of the fundamental structural and mechanical properties of BNNTs and the pursuits of their novel structural and electronics applications.

Michael W. Smith, Cheol Park, Meng Zheng, Changhong Ke ,In-Tae Bae, Kevin Jordan

2012-02-01T23:59:59.000Z

423

Interactive Weather Simulation and Visualization on a Display Wall  

E-Print Network (OSTI)

.hoai.ha,john.markus.bjorndalen,otto.anshus}@uit.no, {tormsh,daniels}@cs.uit.no Abstract. Numerical Weather Prediction models (NWP) used for op- erational Weather Model, WRF, Tiled Display Walls, Live Data Sets, On-Demand Computation. 1 Introduction Numerical Weather Prediction models for use in weather forecasting centers are often computed for a fixed static

Ha, Phuong H.

424

Violating privacy through walls by passive monitoring of radio windows  

Science Journals Connector (OSTI)

We investigate the ability of an attacker to passively use an otherwise secure wireless network to detect moving people through walls. We call this attack on privacy of people a "monitoring radio windows" (MRW) attack. We design and implement the MRW ... Keywords: line crossing, radio window, signal strength, wifi

Arijit Banerjee; Dustin Maas; Maurizio Bocca; Neal Patwari; Sneha Kasera

2014-07-01T23:59:59.000Z

425

Dynamics of biased domain walls and the devaluation mechanism  

SciTech Connect

We study the evolution of biased domain walls in the early universe. We explicitly discuss the roles played by the surface tension and volume pressure in the evolution of the walls, and quantify their effects by looking at the collapse of spherical wall solutions. We then apply our results to a particular mechanism, known as the devaluation scenario, in which the dynamics of biased domain walls was suggested as a possible solution to the cosmological constant problem. Our results indicate that devaluation will, in general, lead to values of the cosmological constant that differ by several orders of magnitude from the observationally inferred value, {rho}{sub vac}{sup 1/4}{approx}10{sup -3} eV. We also argue that the reasons behind this are not specific to a particular realization, and are expected to persist in any scenario of this kind, except if a low-energy cutoff on the spectra of vacuum energy densities, of the order of the critical density at the present time, is postulated. This implies that any such scenario will require a fine-tuning similar to the usual one.

Avelino, P. P.; Sousa, L. [Centro de Fisica do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Departamento de Fisica da Faculdade de Ciencias da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Martins, C. J. A. P. [Centro de Astrofisica, Universidade do Porto, Rua das Estrelas s/n, 4150-762 Porto (Portugal); DAMTP, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom)

2008-08-15T23:59:59.000Z

426

SMERDON ET AL.: AUXILIARY MATERIAL Auxiliary Material  

E-Print Network (OSTI)

run [Ammann et al., 2007; hereinafter CCSM] and the GKSS ECHO-g ERIK2 run [González-Rouco et al., 2006; hereinafter ECHO-g]. The annual means of the modeled temperature fields are interpolated to 5° latitude;SMERDON ET AL.: AUXILIARY MATERIAL 2 ECHO-g simulations, respectively. The above conventions

Smerdon, Jason E.

427

Montani, Kohn, Smith and Schultz (2006), Supplemental Material Supplemental Material  

E-Print Network (OSTI)

Montani, Kohn, Smith and Schultz (2006), Supplemental Material 1 Supplemental Material A. Entropy, Kohn, Smith and Schultz (2006), Supplemental Material 2 occupied, it is ambiguous whether

Smith, Matthew A.

428

Materials Science & Tech Division | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Supporting Organizations Supporting Organizations Center for Nanophase Materials Sciences Chemical Sciences Division Materials Science and Technology BES Chemical Sciences, Geosciences, and Biosciences Program BES Materials Sciences and Engineering Program Joint Institute For Advanced Materials Advanced Materials Home | Science & Discovery | Advanced Materials | Supporting Organizations | Materials Science and Technology SHARE Materials Science and Technology Division The Materials Science and Technology Division is unique within the Department of Energy (DOE) System with mission goals that extend from fundamental materials science to applied materials science and technology. One key component of the division is a strong Basic Energy Sciences (BES) portfolio that pushes the frontiers of materials theory, synthesis

429

Nonconforming Material Process  

NLE Websites -- All DOE Office Websites (Extended Search)

11 Nonconforming Material / Product Process 11_0304 Page 1 of 6 11 Nonconforming Material / Product Process 11_0304 Page 1 of 6 EOTA - Business Process Document Title: Nonconforming Material / Product Process Document Number: P-011 Rev. 11_0304 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Document(s): F-015 Nonconformance Report, REG-003 Record Register, ISDP-002 Training Production Process P-011 Nonconforming Material / Product Process 11_0304 Page 2 of 6 Revision History: Rev. Description of Change A Initial Release 08_0416 Added verbiage CAR/PAR/IO to Step 2 P-011 Nonconforming Material / Product Process 11_0304 Page 3 of 6 I. Purpose To establish the process for nonconforming material to be identified, segregated and dispositioned to prevent its unintended

430

MST: Organizations: Organic Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Adhesive Bonding Adhesive Bonding Composites Encapsulation Materials Characterization Mechanical Testing Molding, Thermoforming, & Compounding Organizations Organic Materials Composite-to-metal adhesive bond Experimental/analytical study of composit-to-metal adhesive bond. The Organic Materials department in the Advanced Manufacturing and Processing Laboratory provides innovative prototype fabrication, full service small lot production, materials technology, processing expertise, and a broad range of organic material characterization and mechanical testing techniques. We encapsulate, we join and bond, we foam, we analyze and image, we build composite structures. We strive to make you, our customers, successful! We partner with you to find the right combination of materials, processing, and fixturing that will result in the highest value

431

Material Disposal Areas  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Disposal Areas Material Disposal Areas Material Disposal Areas Material Disposal Areas, also known as MDAs, are sites where material was disposed of below the ground surface in excavated pits, trenches, or shafts. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Material Disposal Areas at LANL The following are descriptions and status updates of each MDA at LANL. To view a current fact sheet on the MDAs, click on LA-UR-13-25837 (pdf). MDA A MDA A is a Hazard Category 2 nuclear facility comprised of a 1.25-acre, fenced, and radiologically controlled area situated on the eastern end of Delta Prime Mesa. Delta Prime Mesa is bounded by Delta Prime Canyon to the north and Los Alamos Canyon to the south.

432

Modeling of Spherical Torus Plasmas for Liquid Lithium Wall Experiments  

SciTech Connect

Liquid metal walls have the potential to solve first-wall problems for fusion reactors, such as heat load and erosion of dry walls, neutron damage and activation, and tritium inventory and breeding. In the near term, such walls can serve as the basis for schemes to stabilize magnetohydrodynamic (MHD) modes. Furthermore, the low recycling characteristics of lithium walls can be used for particle control. Liquid lithium experiments have already begun in the Current Drive eXperiment-Upgrade (CDX-U). Plasmas limited with a toroidally localized limiter have been investigated, and experiments with a fully toroidal lithium limiter are in progress. A liquid surface module (LSM) has been proposed for the National Spherical Torus Experiment (NSTX). In this larger ST, plasma currents are in excess of 1 MA and a typical discharge radius is about 68 cm. The primary motivation for the LSM is particle control, and options for mounting it on the horizontal midplane or in the divertor region are under consideration. A key consideration is the magnitude of the eddy currents at the location of a liquid lithium surface. During plasma start up and disruptions, the force due to such currents and the magnetic field can force a conducting liquid off of the surface behind it. The Tokamak Simulation Code (TSC) has been used to estimate the magnitude of this effect. This program is a two dimensional, time dependent, free boundary simulation code that solves the MHD equations for an axisymmetric toroidal plasma. From calculations that match actual ST equilibria, the eddy current densities can be determined at the locations of the liquid lithium. Initial results have shown that the effects could be significant, and ways of explicitly treating toroidally local structures are under investigation.

R. Kaita; S. Jardin; B. Jones; C. Kessel; R. Majeski; J. Spaleta; R. Woolley; L. Zakharo; B. Nelson; M. Ulrickson

2002-01-29T23:59:59.000Z

433

Absolute nuclear material assay  

DOE Patents (OSTI)

A method of absolute nuclear material assay of an unknown source comprising counting neutrons from the unknown source and providing an absolute nuclear material assay utilizing a model to optimally compare to the measured count distributions. In one embodiment, the step of providing an absolute nuclear material assay comprises utilizing a random sampling of analytically computed fission chain distributions to generate a continuous time-evolving sequence of event-counts by spreading the fission chain distribution in time.

Prasad, Manoj K. (Pleasanton, CA); Snyderman, Neal J. (Berkeley, CA); Rowland, Mark S. (Alamo, CA)

2012-05-15T23:59:59.000Z

434

Journal of Nuclear Materials 141-143 (1986) 221-225 North-Holland, Amsterdam  

E-Print Network (OSTI)

NationalLaboratory, Argonne, IL 60439-4837, USA H.M. ATTAYA, and G.L. KULCINSKI Nuclear EngineeringJournal of Nuclear Materials 141-143 (1986) 221-225 North-Holland, Amsterdam ION DEBRIS AND X-RAY ENERGY DEPOSITION AND RESPONSE OF FUSION REACTOR FIRST WALLS* A.M. HASSANEIN Fusion PowerProgram,Argonne

Harilal, S. S.

435

Materials Science and Engineering B 120 (2005) 9194 Optical index profile at an antiparallel ferroelectric domain  

E-Print Network (OSTI)

-antisites, NbLi (which are excess Nb atoms at Li locations), and lithium vacancies denoted by VLi. The de- fect ferroelectric domain wall in lithium niobate Sungwon Kim, Venkatraman Gopalan Materials Research Institute-stoichiometric lithium niobate. This is imaged using near-field scanning optical microscopy. A detailed modeling

Gopalan, Venkatraman

436

New Alkali Doped Pillared Carbon Materials Designed to Achieve Practical Reversible Hydrogen Storage for Transportation  

E-Print Network (OSTI)

and room temperature. This satisfies the DOE (Department of Energy) target of hydrogen-storage materials single-wall nanotubes can lead to a hydrogen-storage capacity of 6.0 mass% and 61:7 kg=m3 at 50 bars of roughly 1­20 bars and ambient temperature. Chen et al. reported remarkable hydrogen-storage capacities

Goddard III, William A.

437

ADVANCED MATERIALS Curriculum Biomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP  

E-Print Network (OSTI)

ADVANCED MATERIALS Curriculum Biomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP Computational Methods in Materials Science 4 CP Lab Materials Science I 5 CP Physical Chemistry 4 CP General Chemistry 2 CP Synthesis of Org. & Inorg. Materials 4 CP Introductory Solid

Pfeifer, Holger

438

ADVANCED MATERIALS Curriculum Nanomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP  

E-Print Network (OSTI)

ADVANCED MATERIALS Curriculum Nanomaterials Materials Science I 5 CP Materials Science II 5 CP Lab Materials Science II 5 CP Computational Methods in Materials Science 4 CP Lab Materials Science I 5 CP Physical Chemistry 4 CP General Chemistry 2 CP Synthesis of Org. & Inorg. Materials 4 CP Introductory Solid

Pfeifer, Holger

439

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

440

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

McEwan, T.E.

1997-03-11T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

NETL: Advanced Research - Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Materials > Chrome Oxide Refractory High Performance Materials > Chrome Oxide Refractory Advanced Research High Performance Materials Chrome Oxide Refractory One notable NETL success is the development of a chrome oxide refractory material capable of working in slagging gasifier conditions. In this project, researchers first determined that one of the major failure mechanisms for chrome oxide refractories exposed to the intense heat and corrosive environment was spalling, or the chipping or flaking of refractory material from an exposed face. They used this information to formulate a high-chrome oxide refractory composition that resists spalling, resulting in a refractory with a longer service life in the gasifier. Inside an ultrasupercritical (USC) pulverized coal power plant, materials are exposed to temperatures up to 760°C and pressures up to 5,000 psi. Operating a USC system can improve power plant efficiency up to 47% and reduce emissions. However, finding boiler and turbine materials that can hold up under extreme conditions requires new high-temperature metal alloys and ceramic coatings, as well as computational modeling research to optimize the processing of these materials. Advanced Research Materials Development program successes in this area include the following:

442

Fission, Fusion Materials Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

is shown in illustration. Materials are the immediate priority of both the fission and fusion communities. Extending the lifetime of the current fleet of light water reactors...

443

Thermoelectric materials having porosity  

DOE Patents (OSTI)

A thermoelectric material and a method of making a thermoelectric material are provided. In certain embodiments, the thermoelectric material comprises at least 10 volume percent porosity. In some embodiments, the thermoelectric material has a zT greater than about 1.2 at a temperature of about 375 K. In some embodiments, the thermoelectric material comprises a topological thermoelectric material. In some embodiments, the thermoelectric material comprises a general composition of (Bi.sub.1-xSb.sub.x).sub.u(Te.sub.1-ySe.sub.y).sub.w, wherein 0.ltoreq.x.ltoreq.1, 0.ltoreq.y.ltoreq.1, 1.8.ltoreq.u.ltoreq.2.2, 2.8.ltoreq.w.ltoreq.3.2. In further embodiments, the thermoelectric material includes a compound having at least one group IV element and at least one group VI element. In certain embodiments, the method includes providing a powder comprising a thermoelectric composition, pressing the powder, and sintering the powder to form the thermoelectric material.

Heremans, Joseph P.; Jaworski, Christopher M.; Jovovic, Vladimir; Harris, Fred

2014-08-05T23:59:59.000Z

444

Materials | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

today New high-tech materials are the key to breakthroughs in biology, the environment, nuclear energy, transportation and national security. Argonne continues to make...

445

UESC Workshop Materials  

Energy.gov (U.S. Department of Energy (DOE))

Presentation covers the UESC Workshop Materials and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Providence, Rhode Island.

446

Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

the interface of electrodes and electrolytes and using supercomputers to predict how battery systems will perform. We develop "soft" materials, including polymers and...

447

Radiation Safety Training Materials  

Energy.gov (U.S. Department of Energy (DOE))

The following Handbooks and Standard provide recommended hazard specific training material for radiological workers at DOE facilities and for various activities.

448

Webinar: Materials Genome Initative  

Energy.gov (U.S. Department of Energy (DOE))

Audio recording and text version of the Fuel Cell Technologies Office webinar titled "Materials Genome Initiative," originally presented on December 2, 2014.

449

EMSL - battery materials  

NLE Websites -- All DOE Office Websites (Extended Search)

battery-materials en Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments. http:www.emsl.pnl.govemslwebpublications...

450

Management of Nuclear Materials  

Directives, Delegations, and Requirements

To establish requirements for the lifecycle management of DOE owned and/or managed accountable nuclear materials. Cancels DOE O 5660.1B.

2009-08-17T23:59:59.000Z

451

Timelines | Critical Materials Institute  

NLE Websites -- All DOE Office Websites (Extended Search)

of interest to rare earths and critical materials, organized by those specific to rare earth elements, general chemistry and uses. Timelines of rare earth discovery: Discovery and...

452

Radioactive Material Transportation Practices  

Directives, Delegations, and Requirements

Establishes standard transportation practices for Departmental programs to use in planning and executing offsite shipments of radioactive materials including radioactive waste. Does not cancel other directives.

2002-09-23T23:59:59.000Z

453

Novel Anode Materials  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

with a variety of loadings, morphologies, and thicknesses. - Develop synchrotron tomography tools to better understand how the active materials interact with their surroundings...

454

Very long single- and few-walled boron nitride nanotubes via the pressurized vapor/condenser method  

SciTech Connect

Boron nitride nanotubes (BNNTs) are desired for their exceptional mechanical, electronic, thermal, structural, textural, optical, and quantum properties. A new method for producing long, small-diameter, single- and few-walled, boron nitride nanotubes (BNNTs) in macroscopic quantities is reported. The pressurized vapor/condenser (PVC) method produces, without catalysts, highly crystalline, very long, small-diameter, BNNTs. Palm-sized, cotton-like masses of BNNT raw material were grown by this technique and spun directly into centimeters-long yarn. Nanotube lengths were observed to be 100 times that of those grown by the most closely related method. Self-assembly and growth models for these long BNNTs are discussed.

Michael W. Smith, Kevin Jordan, Cheol Park, Jae-Woo Kim, Peter Lillehei, Roy Crooks, Joycelyn Harrison

2009-11-01T23:59:59.000Z

455

Intrinsic carrier mobility of a single-layer graphene covalently bonded with single-walled carbon nanotubes  

SciTech Connect

We report intrinsic carrier mobility calculations of a two-dimensional nanostructure that consists of porous single layer graphene covalently bonded with single-walled carbon nanotubes on both sides. We used first-principles calculation and found that the deformation potential of such system is about 25% of that of graphene, and the carrier mobility is about 5??10{sup 4} cm{sup 2} V{sup ?1} s{sup ?1} for both electrons and holes, about one order of magnitude lower than that of graphene. This nanostructure and its three-dimensional stacking could serve as novel organic electronic materials.

Li, Dian; Shao, Zhi-Gang [Laboratory of Quantum Engineering and Quantum Materials, School of Physics and Telecommunication Engineering, South China Normal University, Guangzhou, Guangdong 510006 (China); Hao, Qing [Department of Aerospace and Mechanical Engineering, University of Arizona, Tucson, Arizona 85721 (United States); Zhao, Hongbo, E-mail: zhaohb@scnu.edu.cn [Laboratory of Quantum Engineering and Quantum Materials, School of Physics and Telecommunication Engineering, South China Normal University, Guangzhou, Guangdong 510006 (China); Department of Aerospace and Mechanical Engineering, University of Arizona, Tucson, Arizona 85721 (United States)

2014-06-21T23:59:59.000Z

456

SRS - Programs - H Area Nuclear Materials Disposition  

NLE Websites -- All DOE Office Websites (Extended Search)

H Area Nuclear Materials Disposition H Area Nuclear Materials Disposition The primary mission of the H-Canyon Complex is to dissolve, purify and blend-down surplus highly enriched uranium (HEU) and aluminum-clad foreign and domestic research reactor fuel to produce a low enriched uranium (LEU) solution suitable for conversion to commercial reactor fuel. A secondary mission for H-Canyon is to dissolve excess plutonium (Pu) not suitable for MOX and transfer it for vitrification in the Defense Waste Processing Facility at SRS. H Canyon was constructed in the early 1950s and began operations in 1955. The building is called a canyon because of its long rectangular shape and two continuous trenches that contains the process vessels. It is approximately 1,000 feet long with several levels to accommodate the various stages of material stabilization, including control rooms to monitor overall equipment and operating processes, equipment and piping gallery for solution transport, storage, and disposition, and unique overhead bridge cranes to support overall process operations. All work is remotely controlled, and employees are further protected from radiation by thick concrete walls.

457

Open-cell glass crystalline porous material  

DOE Patents (OSTI)

An open-cell glass crystalline porous material made from hollow microspheres which are cenospheres obtained from fly ash, having an open-cell porosity of up to 90 vol. % is produced. The cenospheres are separated into fractions based on one or more of grain size, density, magnetic or non-magnetic, and perforated or non-perforated. Selected fractions are molded and agglomerated by sintering with a binder at a temperature below the softening temperature, or without a binder at a temperature about, or above, the softening temperature but below the temperature of liquidity. The porous material produced has an apparent density of 0.3-0.6 g/cm.sup.3, a compressive strength in the range of 1.2-3.5 MPa, and two types of openings: through-flow wall pores in the cenospheres of 0.1-30 micrometers, and interglobular voids between the cenospheres of 20-100 micrometers. The porous material of the invention has properties useful as porous matrices for immobilization of liquid radioactive waste, heat-resistant traps and filters, supports for catalysts, adsorbents and ion-exchangers.

Anshits, Alexander G. (Krasnoyarsk, RU); Sharonova, Olga M. (Krasnoyarsk, RU); Vereshchagina, Tatiana A. (Krasnoyarsk, RU); Zykova, Irina D. (Krasnoyarsk, RU); Revenko, Yurii A. (Zheleznogorsk, RU); Tretyakov, Alexander A. (Zheleznogorsk, RU); Aloy, Albert S. (Saint-Petersburg, RU); Lubtsev, Rem I. (Saint-Petersburg, RU); Knecht, Dieter A. (Idaho Falls, ID); Tranter, Troy J. (Idaho Falls, ID); Macheret, Yevgeny (Idaho Falls, ID)

2002-01-01T23:59:59.000Z

458

Building thermal envelope systems and materials (BTESM) progress report for DOE Office of Buildings Energy Research  

SciTech Connect

The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Program is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, and building diagnostics. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months.

Burn, G. (comp.)

1990-10-01T23:59:59.000Z

459

Apparatus and method for simulating material damage from a fusion reactor  

DOE Patents (OSTI)

This paper discusses an apparatus and method for simulating a fusion environment on a first wall or blanket structure. A material test specimen is contained in a capsule made of a material having a low hydrogen solubility and permeability. The capsule is partially filled with a lithium solution, such that the test specimen is encapsulated by the lithium. The capsule is irradiated by a fast fission neutron source.

Smith, D.L.; Greenwood, L.R.; Loomis, B.A.

1988-05-20T23:59:59.000Z

460

Building Thermal Envelope Systems and Materials (BTESM) progress report for DOE Office of Buildings Energy Research  

SciTech Connect

The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Program is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, and building diagnostics. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months.

Burn, G. (comp.)

1990-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Building Thermal Envelope Systems and Materials (BTESM) progress report for DOE Office of Buildings Energy Research  

SciTech Connect

The Monthly Report of the Building Thermal Envelope Systems and Materials (BTESM) Program is a monthly update of both in-house ORNL projects and subcontract activities in the research areas of building materials, wall systems, foundations, roofs, building diagnostics, and research utilization and technology transfer. Presentations are not stand-alone paragraphs every month. Their principal values are the short-time lapse between accomplishment and reporting and their evolution over a period of several months.

Burn, G. (comp.)

1990-01-01T23:59:59.000Z

462

Fusion materials irradiations at MaRIE's fission fusion facility  

SciTech Connect

Los Alamos National Laboratory's proposed signature facility, MaRIE, will provide scientists and engineers with new capabilities for modeling, synthesizing, examining, and testing materials of the future that will enhance the USA's energy security and national security. In the area of fusion power, the development of new structural alloys with better tolerance to the harsh radiation environments expected in fusion reactors will lead to improved safety and lower operating costs. The Fission and Fusion Materials Facility (F{sup 3}), one of three pillars of the proposed MaRIE facility, will offer researchers unprecedented access to a neutron radiation environment so that the effects of radiation damage on materials can be measured in-situ, during irradiation. The calculated radiation damage conditions within the F{sup 3} match, in many respects, that of a fusion reactor first wall, making it well suited for testing fusion materials. Here we report in particular on two important characteristics of the radiation environment with relevancy to radiation damage: the primary knock-on atom spectrum and the impact of the pulse structure of the proton beam on temporal characteristics of the atomic displacement rate. With respect to both of these, analyses show the F{sup 3} has conditions that are consistent with those of a steady-state fusion reactor first wall.

Pitcher, Eric J [Los Alamos National Laboratory

2010-10-06T23:59:59.000Z

463

Recent Advances in Computational Materials Science and Multiscale Materials Modeling  

E-Print Network (OSTI)

Recent Advances in Computational Materials Science and Multiscale Materials Modeling Guest Editors Advances in Computational Materials Science and Multiscale Materials Modeling. These symposia provide. Professor Karel Matous Aerospace and Mechanical Engineering Department University of Notre Dame Email

Matous, Karel

464

Critical Materials Strategy Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

diplomacy. As the nation's leading funder of research on the physical sciences, DOE's capabilities with respect to materials research are substantial. Topics identified for priority research attention include rare earth substitutes in magnets, batteries, photovoltaic films and phosphors; environmentally sound mining and materials processing; and recycling. The eight programs and policies address risks, con- straints and opportunities across the supply chain,

465

Critical Materials Strategy Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

diplomacy. As the nation's leading funder of research on the physical sciences, DOE's capabilities with respect to materials research are substantial. Topics identified for priority research attention include rare earth substitutes in magnets, batteries, photovoltaic films and phosphors; environmentally sound mining and materials processing; and recycling. The eight programs and policies address risks, con- straints and opportunities across the supply chain,

466

MATERIAL TRACKING USING LANMAS  

SciTech Connect

LANMAS is a transaction-based nuclear material accountability software product developed to replace outdated and legacy accountability systems throughout the DOE. The core underlying purpose of LANMAS is to track nuclear materials inventory and report transactions (movement, mixing, splitting, decay, etc.) to the Nuclear Materials Management and Safeguards System (NMMSS). While LANMAS performs those functions well, there are many additional functions provided by the software product. As a material is received onto a site or created at a site, its entire lifecycle can be tracked in LANMAS complete to its termination of safeguards. There are separate functions to track material movements between and within material balance areas (MBAs). The level of detail for movements within a MBA is configurable by each site and can be as high as a site designation or as detailed as building/room/rack/row/position. Functionality exists to track the processing of materials, either as individual items or by modeling a bulk process as an individual item to track inputs and outputs from the process. In cases where sites have specialized needs, the system is designed to be flexible so that site specific functionality can be integrated into the product. This paper will demonstrate how the software can be used to input material into an account and track it to its termination of safeguards.

Armstrong, F.

2010-06-07T23:59:59.000Z

467

Nanocrystalline Heterojunction Materials  

DOE Patents (OSTI)

Mesoporous nanocrystalline titanium dioxide heterojunction materials and methods of making the same are disclosed. In one disclosed embodiment, materials comprising a core of titanium dioxide and a shell of a molybdenum oxide exhibit a decrease in their photoadsorption energy as the size of the titanium dioxide core decreases.

Elder, Scott H. (Portland, OR); Su, Yali (Richland, WA); Gao, Yufei (Blue Bell, PA); Heald, Steve M. (Downers Grove, IL)

2004-02-03T23:59:59.000Z

468

Cybersecurity Awareness Materials  

Energy.gov (U.S. Department of Energy (DOE))

The OCIO develops and distributes a variety of awareness material to be used during cyber awareness campaigns or as needed to address an emerging cyber threat or hot topic. These materials are available to other DOE organizations or public and private institutions to enhance or supplement site-specific awareness programs.

469

Materials Science & Engineering  

E-Print Network (OSTI)

technologies used to develop energy sources, protect the environment, preserve the national infrastructure, electronic materials, composites, biomaterials, nuclear materials and nanomaterials. The common thread and Engineering program. Effective 2014-2015 1 Updated May 2014 #12;Additionally, here are some helpful

Simons, Jack

470

Building America Top Innovations Hall of Fame Profile … High-R Walls  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

require walls that cost-effectively require walls that cost-effectively control both thermal and moisture flow. Building America research results have provided proven high-R wall options for builders across the country. Building America's research teams have conducted modeling analysis as well as field studies of several different wall assemblies to identify effective "whole- wall" R-values that take into account thermal bridging of framing members. Researchers have also investigated critical moisture potential and durability issues since high-R walls have much less drying potential. Between 2008 and 2012, CARB conducted several evaluations of wall types (see for example Aldrich et al. 2010). In one study, CARB performed THERM and WUFI analysis on three typical cold climate wall assemblies modeled at ASHRAE

471

Numerical Simulation of Wind Tunnel Wall Effects on the Transonic Flow around an Airfoil Model  

Science Journals Connector (OSTI)

For wind tunnel measurements in closed-wall test sections, possible interference effects of the wind tunnel walls play an important role. Three-dimensional TAU simulations were performed for the transonic flow ar...

K. Richter; H. Rosemann

2013-01-01T23:59:59.000Z

472

Apparatus for impingement cooling a side wall adjacent an undercut region of a turbine nozzle segment  

DOE Patents (OSTI)

A gas turbine nozzle segment has outer and inner bands and vanes therebetween. Each band includes a side wall, a cover and an impingement plate between the cover and nozzle wall defining two cavities on opposite sides of the impingement plate. Cooling steam is supplied to one cavity for flow through apertures of the impingement plate to cool the nozzle wall. The side wall of the band and inturned flange define with the nozzle wall an undercut region. Slots are formed through the inturned flange along the nozzle side wall. A plate having through-apertures extending between opposite edges thereof is disposed in each slot, the slots and plates being angled such that the cooling medium exiting the apertures in the second cavity lie close to the side wall for focusing and targeting cooling medium onto the side wall.

Burdgick, Steven Sebastian (Schenectady, NY)

2002-01-01T23:59:59.000Z

473

Diverse mechanisms of pectic polysaccharide degradation distinguished in fruit cell walls in vivo  

E-Print Network (OSTI)

Cell wall loosening and degradation are important processes in major stages of plant development including fruit ripening. Three main mechanisms have been proposed to contribute towards cell wall polysaccharide degradation ...

Othman, Babul Airianah

2012-11-30T23:59:59.000Z

474

Three Human Cell Types Respond to Multi-Walled Carbon Nanotubes...  

NLE Websites -- All DOE Office Websites (Extended Search)

Human Cell Types Respond to Multi-Walled Carbon Nanotubes and Titanium Dioxide Nanobelts with Cell-Specific Transcriptomic Three Human Cell Types Respond to Multi-Walled Carbon...

475

Ultrafast Mid-Infrared Intra-Excitonic Response of Individualized Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

Z. Ma et al. , in: Carbon Nanotubes, edited by A. Jorio, G.Single-Walled Carbon Nanotubes Jigang Wang, 1, 2 Matt W.7,5) single-walled carbon nanotubes. Strong photoinduced

Wang, Jigang

2011-01-01T23:59:59.000Z

476

Reduction of Metal Oxides by Microwave Heating of Multi-walled...  

NLE Websites -- All DOE Office Websites (Extended Search)

Reduction of Metal Oxides by Microwave Heating of Multi-walled Carbon Nanotubes Microwave heating of a metal oxide in the presence of multi-walled carbon nanotubes may result in...

477

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge  

Science Journals Connector (OSTI)

Growth Conditions of Double-Walled Carbon Nanotubes in Arc Discharge ... Preparation conditions for large-scale synthesis of double-walled carbon nanotubes (DWCNTs) by using electric arc discharge were examined. ...

Yahachi Saito; Takanori Nakahira; Sashiro Uemura

2003-01-04T23:59:59.000Z

478

An analysis model for wind resistance performance of automated exterior wall painting robots in apartment buildings  

Science Journals Connector (OSTI)

The painting of exterior walls on apartment buildings involves ... to fatalities. Although the market for domestic painting is expanding, painters tend to avoid the risk of painting exterior walls. Accordingly, m...

Ji-Won Cho; Jeong-Ho Lee; Young-Suk Kim

2014-05-01T23:59:59.000Z

479

Uniform Directional Alignment of Single-Walled Carbon Nanotubes in Viscous Polymer Flow  

Science Journals Connector (OSTI)

In this work, we probed the effects of shear flow on the alignment of dispersed single-walled carbon nanotubes in polymer solutions. Two different systems were compared:? Single-walled carbon nanotubes dispersed using an anionic surfactant and single-...

Erin Camponeschi; Bill Florkowski; Richard Vance; Glenn Garrett; Hamid Garmestani; Rina Tannenbaum

2006-01-14T23:59:59.000Z

480

Chitosan, the Deacetylated Form of Chitin, Is Necessary for Cell Wall Integrity in Cryptococcus neoformans  

Science Journals Connector (OSTI)

...significantly reduced chitosan and are sensitive to cell wall inhibitors and elevated temperatures...sensitivity suggests that chitosan may be an essential...and mother cells. Chitosan-deficient strains...select cell wall inhibitors. The majority of...

Lorina G. Baker; Charles A. Specht; Maureen J. Donlin; Jennifer K. Lodge

2007-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "wall material brick" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Solution of Air Conditioning Cooling Load Temperature for New Energy-Saving Walls  

E-Print Network (OSTI)

With the development of wall reforms, the production scale and engineering applications of energy savings are increasing daily. It is inevitable to aggressively extend production of new energy-saving walls. Based on the thermal instantaneous...

Wang, X.; Hong, J.; Deying, L.

2006-01-01T23:59:59.000Z

482

Carbon Materials Breakout Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Breakout Group Process Materials Breakout Group Process * Day 2, Thursday - Review results of Day 1 and modify if needed - Identify critical R&D needs - Outline R&D plan with key milestones - Report results to plenary Carbon Materials Breakout Group * Key Results - Target: get the science right to engineer carbon materials for hydrogen storage * Integrate theory, experiment, engineering * Understand mechanisms, effects, and interactions ranging from physisorption to chemisorption - Theory * Provide "directional" guidance for experiments (and vice- versa) * Provide baseline theory to elucidate parameters affecting the number and type of binding sites and the heat of their interaction with H2 (∆H ) for a broad range of (highly) modified carbon materials

483

Materials of Gasification  

SciTech Connect

The objective of this project was to accumulate and establish a database of construction materials, coatings, refractory liners, and transitional materials that are appropriate for the hardware and scale-up facilities for atmospheric biomass and coal gasification processes. Cost, fabricability, survivability, contamination, modes of corrosion, failure modes, operational temperatures, strength, and compatibility are all areas of materials science for which relevant data would be appropriate. The goal will be an established expertise of materials for the fossil energy area within WRI. This would be an effort to narrow down the overwhelming array of materials information sources to the relevant set which provides current and accurate data for materials selection for fossil fuels processing plant. A significant amount of reference material on materials has been located, examined and compiled. The report that describes these resources is well under way. The reference material is in many forms including texts, periodicals, websites, software and expert systems. The most important part of the labor is to refine the vast array of available resources to information appropriate in content, size and reliability for the tasks conducted by WRI and its clients within the energy field. A significant has been made to collate and capture the best and most up to date references. The resources of the University of Wyoming have been used extensively as a local and assessable location of information. As such, the distribution of materials within the UW library has been added as a portion of the growing document. Literature from recent journals has been combed for all pertinent references to high temperature energy based applications. Several software packages have been examined for relevance and usefulness towards applications in coal gasification and coal fired plant. Collation of the many located resources has been ongoing. Some web-based resources have been examined.

None

2005-09-15T23:59:59.000Z

484

Modeling the Impact of Agricultural Terrace Walls on Spatial Patterns of Erosion and Landscape Evolution  

E-Print Network (OSTI)

Modeling the Impact of Agricultural Terrace Walls on Spatial Patterns of Erosion and Landscape Evolution Jennifer Glaubius Department of Geography University of Kansas Research Objectives 2 1. Implement terrace walls within a landscape evolution... model 2. Test the impact of human intervention with the terrace walls a. Interval between checking the wall for maintenance b. Time since abandonment of terraced land Model 3 Landscape evolution model from Chen et al. (2014); implemented in Python...

Glaubius, Jennifer

2014-11-19T23:59:59.000Z

485

New retaining wall design criteria based on lateral earth pressure measurements  

E-Print Network (OSTI)

. , 72 1X LIST OF FIGURES Figures Page Condition of Active Rankine State, Cantilever Wall . . 3 Cross Section of Cantilever Wall Location of Earth Pressure Cells, Cantilever Wall Movement Measurement Scheme, Cantilever Wall. 12 Measured Lateral... INTRODUCTION Earth Pressure Theories -- The principles of limiting equilibrium mechanics are used to desiqn earth retaining structures. In this approach the pressures that would exist at a failure condition are predicted from Coulomb or Rankine (13...

Wright, William Vincent

2012-06-07T23:59:59.000Z

486

Anticavitation protection of pressure outlets through regulation of velocities in wall layer of the flow  

Science Journals Connector (OSTI)

1. The tests showed that an installation forming a continuous low-velocity flow along a wall comprising a solid ...

P. R. Khlopenkov; G. A. Chepaikin

1976-08-01T23:59:59.000Z

487

Vehicle Technologies Office: Propulsion Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Materials Manufacturers use propulsion (or powertrain) materials in the components that move vehicles of every size and shape. Conventional vehicles use these materials in components such as the engine, transmission, fuel system, and exhaust after-treatment systems. Electric drive vehicles use propulsion materials in their electric motors and power electronics. Developing advanced propulsion materials is essential to commercializing new, highly efficient automotive technologies that have technical requirements that existing powertrain materials cannot meet. The Vehicle Technology Office's (VTO) research in propulsion materials focuses on four areas: Materials for hybrid and electric drive systems Materials for high efficiency combustion engines Materials to enable energy recovery systems and control exhaust gases

488

Radiation Damage and Tritium Breeding Study in a Fusion Reactor Using a Liquid Wall of Various Thorium Molten Salts  

Science Journals Connector (OSTI)

A new magnetic fusion reactor design, called APEX uses a liquid wall between fusion plasma and solid first wall to reach ... replacement of the first wall structure during the reactors operation due to the radia...

Mustafa beyli

2007-12-01T23:59:59.000Z

489

Walled Lake, Michigan: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Walled Lake, Michigan: Energy Resources Walled Lake, Michigan: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.537811°, -83.4810481° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.537811,"lon":-83.4810481,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

490

Wall conditioning and power balance for spheromak plasmas in SSPX  

Science Journals Connector (OSTI)

We report here results from power balance measurements for ohmically heated plasmas in the sustained spheromak physics experiment. The plasma is formed inside a close-fitting tungsten-coated copper shell; wall conditioning by baking, glow discharge cleaning (GDC), Ti gettering, and helium shot conditioning produces clean plasmas (Zeff<2.5) and reduces impurity radiation to a small fraction of the input energy, except when the molybdenum divertor plate has been overheated. We find that most of the input energy is lost by conduction to the walls (the divertor plate and the inner electrode in the coaxial source region). Recently, carborane was added during GDC to boronize the plasma-facing surfaces, but little benefit was obtained.

D.N. Hill; R.D. Wood; R. Bulmer; H.S. McLean; D. Ryutov; B.W. Stallard; S. Woodruff

2003-01-01T23:59:59.000Z

491

Trombe Walls in Low-Energy Buildings: Practical Experiences; Preprint  

NLE Websites -- All DOE Office Websites (Extended Search)

Trombe Walls in Low-Energy Trombe Walls in Low-Energy Buildings: Practical Experiences Preprint July 2004 * NREL/CP-550-36277 P. Torcellini and S. Pless To be presented at the World Renewable Energy Congress VIII and Expo Denver, Colorado August 29-September 3, 2004 National Renewable Energy Laboratory 1617 Cole Boulevard, Golden, Colorado 80401-3393 303-275-3000 * www.nrel.gov Operated for the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy by Midwest Research Institute * Battelle Contract No. DE-AC36-99-GO10337 NOTICE The submitted manuscript has been offered by an employee of the Midwest Research Institute (MRI), a contractor of the US Government under Contract No. DE-AC36-99GO10337. Accordingly, the US Government and MRI retain a nonexclusive royalty-free license to publish or reproduce the published

492

Heat Transfer in Buildings: Application to Solar Air Collector and Trombe Wall Design  

E-Print Network (OSTI)

11 Heat Transfer in Buildings: Application to Solar Air Collector and Trombe Wall Design H. Boyer focuses on the modeling of Trombe solar walls. In each case, detailed modeling of heat transfer allows with same thermal behaviour). For heat conduction in walls, it results from electrical analogy

Paris-Sud XI, Université de

493

Detection of cell wall structural polysaccharides by cellulase-gold and  

E-Print Network (OSTI)

, Bendtska 2, Czech Republic Abstract: The rigid cell wall of Chlorella vulgaris (Trebouxiophyceae wall of the symbiotic Chlorella Pbi strain the chitin-Iike substance was proved (KAPAUN & REISSER1995 Chlorella and Scenedesmus(TAKEDA1993, 1996). Monosaccharidal composition of the rigid cell wall provides

494

Oxidative enzymatic response of white-rot fungi to single-walled carbon nanotubes  

E-Print Network (OSTI)

Oxidative enzymatic response of white-rot fungi to single-walled carbon nanotubes Timothy D. Berry-walled carbon nanotubes (SWCNT) are becoming increasingly prevalent in manufacturing, there is little knowledge. Introduction Single-walled carbon nanotubes (SWCNTs), formed from single- atom thick sheets of carbon wound

Blanchette, Robert A.

495

Carbon nanotubes Growth of Single-Walled Carbon Nanotubes from Sharp  

E-Print Network (OSTI)

Carbon nanotubes Growth of Single-Walled Carbon Nanotubes from Sharp Metal Tips Julio A. Rodri Banhart* The nucleation and growth of single-walled carbon nanotubes is observed in situ in a transmission a region of high surface curvature, spontaneous nucleation and growth of single-walled carbon nanotubes

Nordlund, Kai

496

Propagating and reflecting of spin wave in permalloy nanostrip with 360 domain wall  

SciTech Connect

By micromagnetic simulation, we investigated the interaction between propagating spin wave (or magnonic) and a 360 domain wall in a nanostrip. It is found that propagating spin wave can drive a 360 domain wall motion, and the velocity and direction are closely related to the transmission coefficient of the spin wave of the domain wall. When the spin wave passes through the domain wall completely, the 360 domain wall moves toward the spin wave source. When the spin wave is reflected by the domain wall, the 360 domain wall moves along the spin wave propagation direction. Moreover, when the frequency of the spin wave is coincident with that of the 360 domain wall normal mode, the 360 domain wall velocity will be resonantly enhanced no matter which direction the 360 DW moves along. On the other hand, when the spin wave is reflected from the moving 360 domain wall, we observed the Doppler effect clearly. After passing through a 360 domain wall, the phase of the spin wave is changed, and the phase shift is related to the frequency. Nevertheless, phase shift could be manipulated by the number of 360 domain walls that spin wave passing through.

Zhang, Senfu; Mu, Congpu; Zhu, Qiyuan; Zheng, Qi; Liu, Xianyin; Wang, Jianbo; Liu, Qingfang, E-mail: liuqf@lzu.edu.cn [Key Laboratory for Magnetism and Magnetic Materials of Ministry of Education, Lanzhou University, Lanzhou 730000 (China)

2014-01-07T23:59:59.000Z

497

Supporting Information to: Single-Molecule Electrocatalysis by Single-Walled Carbon Nanotubes  

E-Print Network (OSTI)

S1 Supporting Information to: Single-Molecule Electrocatalysis by Single-Walled Carbon Nanotubes. Experimental Methods I.1. Purification of SWNTs. The single-walled carbon nanotubes were purchased from Carbon Nanotechnologies Incorporated (Purified HiPCO single-walled carbon nanotubes). These SWNTs have an average diameter

Chen, Peng

498

ccsd-00008772,version1-15Sep2005 Nucleation and growth of single wall carbon nanotubes  

E-Print Network (OSTI)

ccsd-00008772,version1-15Sep2005 Nucleation and growth of single wall carbon nanotubes F. Beuneu and growth of single wall carbon nanotubes from a carbon-saturated catalytic particle surrounded by a single. INTRODUCTION Since their discovery nearly fifteen years ago, sin- gle wall carbon nanotubes (SWNT) have

Boyer, Edmond

499

Protective interior wall and attaching means for a fusion reactor vacuum vessel  

DOE Patents (OSTI)

The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.

Phelps, R.D.; Upham, G.A.; Anderson, P.M.

1985-03-01T23:59:59.000Z

500

Single-Walled Carbon Nanotubes of Controlled Diameter and Bundle Size and Their Field Emission Properties  

E-Print Network (OSTI)

Single-Walled Carbon Nanotubes of Controlled Diameter and Bundle Size and Their Field Emission: June 8, 2005 Field emission studies were conducted on as-produced CoMoCAT single-walled carbon nanotube electron emitter. By adjusting the catalytic synthesis conditions, single-walled carbon nanotubes (SWNT

Resasco, Daniel