Powered by Deep Web Technologies
Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Integrated Solar Power Converters: Wafer-Level Sub-Module Integrated DC/DC Converter  

Science Conference Proceedings (OSTI)

Solar ADEPT Project: CU-Boulder is developing advanced power conversion components that can be integrated into individual solar panels to improve energy yields. The solar energy that is absorbed and collected by a solar panel is converted into useable energy for the grid through an electronic component called an inverter. Many large, conventional solar energy systems use one, central inverter to convert energy. CU-Boulder is integrating smaller, microinverters into individual solar panels to improve the efficiency of energy collection. The University’s microinverters rely on electrical components that direct energy at high speeds and ensure that minimal energy is lost during the conversion process—improving the overall efficiency of the power conversion process. CU-Boulder is designing its power conversion devices for use on any type of solar panel.

None

2012-02-09T23:59:59.000Z

2

Integration Of The Security Sub-Modules Elements In The Automotive Industry  

Science Conference Proceedings (OSTI)

This study is addressed to obtain a design methodology for integrated security sub-modules (constituting the suspension and steering modules) in the car manufacturing industry. The sub-modules are made up of a steel structure and anchorage elements (rubber-metal or plastic-metal), which undergo separate surface treatments to prevent corrosion. Afterwards, the elements are traditionally joined by means of adhesives and screws. This process involves a great number of stages, low quality union methods and generation of corrosion areas that shorten its useful life.This methodology provides automotive suppliers an additional added value and cost reduction, allowing them to increase its competitiveness in a sector that faces the transition from the traditional supply chain to a strategic value chain.

Gallego, C.; Fernandez, M.; Caires, A. S. [CIDAUT, Research and Development in Transport and Energy (Spain); Canibano, E. [CIDAUT, Research and Development in Transport and Energy (Spain); Escuela Universitaria Politecnica de Valladolid, Dpto. de Construcciones Arquitectonicas, Ingenieria del Terreno y Mecanica de los Medios Continuos y Teoria de Estructuras (Spain)

2007-05-17T23:59:59.000Z

3

Parasitic Effects Reduction for Wafer-Level Packaging of RF-Mems  

E-Print Network (OSTI)

In RF-MEMS packaging, next to the protection of movable structures, optimization of package electrical performance plays a very important role. In this work, a wafer-level packaging process has been investigated and optimized in order to minimize electrical parasitic effects. The RF-MEMS package concept used is based on a wafer-level bonding of a capping silicon substrate to an RF-MEMS wafer. The capping silicon substrate resistivity, substrate thickness and the geometry of through-substrate electrical interconnect vias have been optimized using finite-element electromagnetic simulations (Ansoft HFSS). Test structures for electrical characterization have been designed and after their fabrication, measurement results will be compared with simulations.

Iannacci, J; Sinaga, S; Gaddi, R; Gnudi, A; Bartek, M

2007-01-01T23:59:59.000Z

4

CX-007739: Categorical Exclusion Determination | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Exclusion Determination University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCDC Converter CX(s) Applied: A9, B3.6 Date: 11302011 Location(s): Colorado,...

5

Categorical Exclusion Determination Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

n rgy n rgy Categorical Exclusion Determination Form Proposed Action Title: (0474-1555) University of Colorado - Boulder - Wafer-Level Sub-Module Integrated DCfDC Converter Program or Field Office: Advanced Research Projects Agency - Energy LocationCs) CCity/County/State): Colorado, Maine, Virginia Proposed Action Description: Funding will support development of a planar, wafer-level sub-module integrated converter (SubMIC) device that can be integrated into various types of photovoltaic (PV) modules to enable low-cost maximum power point tracking at high power processing efficiencies. Proposed work consists of indoor laboratory-based research and development (R&D), microfabrication activities, and analytical research, including: (1) simulated modeling and design of SubMIC components and integrated units, (2) development, fabrication, testing, and optimization

6

Integrated Modules for Bioassay (IMBA) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Current Central Registry Toolbox Version(s): IMBA ExpertTM USDOE Edition version 4.0.28 Code Owner: UK Health Protection Agency (HPA) Description: IMBA ExpertTM (IX) software suite comprises a series of independent modules (referred to as sub-modules) that implement the International Commission on Radiological Protection (ICRP) Publication 66, Human Respiratory Tract Model (HRTM) and the ICRP Publications 30 (series), 67, 68, 69, and 71 biokinetic models. In 2001, the United Kingdom (UK) National Radiological Protection Board (NRPB), whose functions were absorbed later into the UK Health Protection Agency (HPA), and ACJ & Associates Inc., began development of an interface (referred to as a shell) for the IMBA modules. This effort was funded in

7

REDUCING DEVICE YIELD FALLOUT AT WAFER LEVEL TEST WITH ELECTROHYDRODYNAMIC (EHD) CLEANING  

Science Conference Proceedings (OSTI)

Unstable contact resistance (CRES) during wafer test cansignificantly affect device yield, the need for reprobe, andequipment uptime. Abrasive cleaning during off-lineprobe card repair and maintenance is effective forreducing CRES and removing surface ...

Jerry J. Broz; Ph. D. ,. James C. Andersen; Reynaldo M. Rincon

2000-10-01T23:59:59.000Z

8

Three-Dimensional Integration Technology for Advanced Focal Planes and Integrated Circuits  

Science Conference Proceedings (OSTI)

Over the last five years MIT Lincoln Laboratory (MIT-LL) has developed a three-dimensional (3D) circuit integration technology that exploits the advantages of silicon-on-insulator (SOI) technology to enable wafer-level stacking and micrometer-scale electrical interconnection of fully fabricated circuit wafers. Advanced focal plane arrays have been the first applications to exploit the benefits of this 3D integration technology because the massively parallel information flow present in 2D imaging arrays maps very nicely into a 3D computational structure as information flows from circuit-tier to circuit-tier in the z-direction. To date, the MIT-LL 3D integration technology has been used to fabricate four different focal planes including: a 2-tier 64 x 64 imager with fully parallel per-pixel A/D conversion; a 3-tier 640 x 480 imager consisting of an imaging tier, an A/D conversion tier, and a digital signal processing tier; a 2-tier 1024 x 1024 pixel, 4-side-abutable imaging modules for tiling large mosaic focal planes, and a 3-tier Geiger-mode avalanche photodiode (APD) 3-D LIDAR array, using a 30 volt APD tier, a 3.3 volt CMOS tier, and a 1.5 volt CMOS tier. Recently, the 3D integration technology has been made available to the circuit design research community through DARPA-sponsored Multiproject fabrication runs. The first Multiproject Run (3DL1) completed fabrication in early 2006 and included over 30 different circuit designs from 21 different research groups. 3D circuit concepts explored in this run included stacked memories, field programmable gate arrays (FPGAs), and mixed-signal circuits. The second Multiproject Run (3DM2) is currently in fabrication and includes particle detector readouts designed by Fermilab. This talk will provide a brief overview of MIT-LL's 3D-integration process, discuss some of the focal plane applications where the technology is being applied, and provide a summary of some of the Multiproject Run circuit results.

Keast, Craig (M.I.T. Lincoln Laboratory)

2007-02-28T23:59:59.000Z

9

Grid Integration  

SciTech Connect

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its grid integration subprogram.

Not Available

2008-09-01T23:59:59.000Z

10

Insolation integrator  

DOE Patents (OSTI)

An electric signal representative of the rate of insolation is integrated to determine if it is adequate for operation of a solar energy collection system.

Dougherty, John J. (Norristown, PA); Rudge, George T. (Lansdale, PA)

1980-01-01T23:59:59.000Z

11

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility NREL's Energy Systems Integration Facility Garners LEED Platinum View the NREL Press Release. NREL's multistory Energy Systems Integration...

12

NREL: Energy Systems Integration - Integrated Deployment Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Workshop Integrated Deployment Workshop The Energy Systems Integration Facility workshop, Integrated Deployment, was held August 21 - 23, 2012 at the National Renewable Energy Laboratory in Golden, Colorado. Each day of the workshop, which included a tour of the Energy Systems Integration Facility, focused on a different topic: Day 1: Utility-Scale Renewable Integration Day 2: Distribution-Level Integration Day 3: Isolated and Islanded Grid Systems The agenda and presentations from the workshop are below. Agenda Energy Systems Integration Facility Overview ESIF Technology Partnerships Integrated Deployment Model Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings Printable Version Energy Systems Integration Home Research & Development

13

integr~1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7 7 AUDIT REPORT THE U.S. DEPARTMENT OF ENERGY' S MANAGEMENT OF RESEARCH AND DEVELOPMENT INTEGRATION MARCH 1998 U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF AUDIT SERVICES DEPARTMENT OF ENERGY Washington, DC 20585 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman Principal Deputy Inspector General SUBJECT: INFORMATION : Audit Report on "Audit of the Department of Energy's Management of Research and Development Integration" BACKGROUND The Congress, independent task forces, and advisory groups have pointed out the need for the Department to improve its integration of research and development (R&D) projects. In the past, R&D management was carried out by different program offices with the research being

14

Integrated System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Window System Our research activities in the field of high performance windows have led us to conclude that even by using high performance insulating glass units, low conductivity frames, and warm edge spacers, there are still untapped sources for improving energy efficiency in the design and use of residential windows. While such high performance windows are a dramatic improvement over conventional units, they do not reduce conductive losses through wall framing around the window, offer guarantees against excessive wall/window infiltration nor do they adapt to the daily and seasonal potentials for night insulation and summer shading. To meet this need, we have been working on the design, development, and prototyping of Integrated Window Systems (IWS) since 1993. Integrated Window Systems are a form of panelized construction where the wall panel includes an operable or fixed window sash, recessed night insulation, integral solar shading, and is built in a factory setting in order to minimize thermal short circuits and infiltration at joints. IWSs can be built in modular lengths to facilitate their installation with conventional wood frame stick construction or other forms of panelized construction.

15

NREL: Energy Systems Integration - Energy Systems Integration...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Newsroom The Energy Systems Integration Facility (ESIF) will be one of the only megawatt-scale test facilities in the United States that...

16

NREL: Transmission Grid Integration - Solar Integration National...  

NLE Websites -- All DOE Office Websites (Extended Search)

of the Western Wind and Solar Integration Study and Eastern Wind Integration and Transmission Study datasets greatly advanced the modeling of wind and solar power production...

17

NREL: Transmission Grid Integration - Wind Integration Datasets  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind Integration Datasets The Wind Integration Datasets provide energy professionals with a consistent set of wind profiles for the eastern United States and the western United...

18

Integrated Designs to Integrated Operations using BMS  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Designs to Integrated Operations using BMS Speaker(s): Punit Desai Date: February 6, 2013 - 12:15pm Location: 90-3122 Seminar HostPoint of Contact: Girish Ghatikar The...

19

Wind Integration Study Methods (Presentation)  

DOE Green Energy (OSTI)

This presentation provides an overview of common elements, differences, integration costs, and errors in integration analysis.

Milligan, M.; Kirby, B.

2011-04-01T23:59:59.000Z

20

Energy Systems Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Systems Integration Systems Integration Ben Kroposki, PhD, PE Director, Energy Systems Integration National Renewable Energy Laboratory 2 Reducing investment risk and optimizing systems in a rapidly changing energy world * Increasing penetration of variable RE in grid * Increasing ultra high energy efficiency buildings and controllable loads * New data, information, communications and controls * Electrification of transportation and alternative fuels * Integrating energy storage (stationary and mobile) and thermal storage * Interactions between electricity/thermal/fuels/data pathways * Increasing system flexibility and intelligence Current Energy Systems Future Energy Systems Why Energy Systems Integration? 3 Energy Systems Integration Continuum Scale Appliance (Plug)

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Systems Integration Division Homepage  

Science Conference Proceedings (OSTI)

... systems integration and engineering, life cycle assessment, cyber-physical systems, productivity measurement, sustainability and energy efficiency. ...

2013-09-16T23:59:59.000Z

22

Relational measures and integration  

Science Conference Proceedings (OSTI)

Work in fuzzy modeling has recently made its way from the interval $[0,1]\\subseteq {\\mathord{\\rm I \\! R}}$ to the ordinal or even to the qualitative level. We proceed further and introduce relational measures and relational integration. First ideas of ... Keywords: Choquet integral, evidence and belief, measure, necessity, plausibility, possibility measures, relation algebra, relational, sugeno integral

Gunther Schmidt

2006-08-01T23:59:59.000Z

23

Lighting Group: Controls: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Building Control Systems Integration Objective This research project investigates how diverse building control systems can be integrated to provide seamless...

24

Integrability vs Quantum Thermalization  

E-Print Network (OSTI)

Non-integrability is often taken as a prerequisite for quantum thermalization. Still, a generally accepted definition of quantum integrability is lacking. With the basis in the driven Rabi model we discuss this careless usage of the term "integrability" in connection to quantum thermalization. The model would be classified as non-integrable according to the most commonly used definitions, for example, the only preserved quantity is the total energy. Despite this fact, a thorough analysis conjectures that the system will not thermalize. Thus, our findings suggest first of all (i) that care should be paid when linking non-integrability with thermalization, and secondly (ii) that the standardly used definitions for quantum integrability are unsatisfactory.

Jonas Larson

2013-04-12T23:59:59.000Z

25

Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management Integrated Safety Management Home ISM Policy ISM Champions ISM Workshops Resources Archives Contact Us Health and Safety HSS Logo Integrated Safety Management (ISM) ism logo Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Integrated Safety Management (ISM) Web Site. The Department and its contractors remain firmly committed to ISM as first defined in 1996. The objective of ISM is to perform work in a safe and environmentally sound manner. More specifically, as described in DOE P 450.4, Safety Management System Policy: "The Department and Contractors must systematically integrate safety into management and work practices at all levels so that missions are accomplished while protecting the public, the worker, and the environment. This is to be accomplished through effective integration of safety management into all facets of work planning and execution." "

26

Advanced Integrated Systems Technology Development  

E-Print Network (OSTI)

Research Energy Systems Integration Environmentallyenergy use, combined with the capability of the BMS system, including alarms to identify anomalies. Integration

2013-01-01T23:59:59.000Z

27

Infrastructure for Integrated Electronics Design & ...  

Science Conference Proceedings (OSTI)

Infrastructure for Integrated Electronics Design & Manufacturing (IIEDM) Project. ... designed to support distributed supply chain integration and e ...

2010-11-05T23:59:59.000Z

28

Computer Integrated Building Processes Group  

Science Conference Proceedings (OSTI)

... Laboratory effective in October 2011, the Computer Integrated Building Processes Group ... Chris Brown) are now in the Systems Integration Division. ...

2013-07-12T23:59:59.000Z

29

Integrated Biosystems for Sustainable Development  

E-Print Network (OSTI)

Integrated biosystems for sustainable development Proceedings of the InFoRM 2000 National Workshop on Integrated

Kev Warburton; Usha Pillai-mcgarry; Deborah Ramage; No Ms; Dr. Kev Warburton

2002-01-01T23:59:59.000Z

30

Distributed Resource Integration Framework  

Science Conference Proceedings (OSTI)

This report defines a framework for assessing current issues and considerations associated with the deployment and operation of distributed resources. The framework is a guide that can assist utility personnel, distributed resource owners, and other stakeholders in planning integration projects and in relating different integration projects to one another. The framework provides a structured organization of the various elements associated with distributed resource integration, including regulatory, busin...

2009-12-23T23:59:59.000Z

31

Substation Data Integration  

Science Conference Proceedings (OSTI)

The purpose of the project was to implement a field demonstration of automated substation data integration. To achieve the goal of the smart grid, it will be necessary to integrate substation intelligent electronic device (IED) data into a data warehouse or data mart. Converting data to information to allow improved decision making requires automation, which is referred to as an information smart approach. The report discusses automated integration of data from substation IEDs and automated analysis of r...

2010-12-06T23:59:59.000Z

32

Integrated Computational Materials Education  

Science Conference Proceedings (OSTI)

This short course is based on the Summer School for Integrated Computational Materials Education, which was developed to meet this need. We will present a ...

33

Software Component Integration Testing  

Science Conference Proceedings (OSTI)

... a combination of off-the-shelf components, with new components integrated to satisfy ... oriented, that is, it consists of objects with state and behavior. ...

2011-12-02T23:59:59.000Z

34

Grid Integration Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Group The Demand Response Research Center (DRRC) conducts research that advances the near-term adoption of demand response (DR) technologies, policies, programs,...

35

Integrated waste management.  

E-Print Network (OSTI)

??Integrated waste management is considered from a systems’ approach, with a particular emphasis on advancing sustainability. The focus of the thesis is to examine the… (more)

Seadon, Jeffrey Keith

2010-01-01T23:59:59.000Z

36

FCT Technology Validation: Integrated Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Projects to Integrated Projects to someone by E-mail Share FCT Technology Validation: Integrated Projects on Facebook Tweet about FCT Technology Validation: Integrated Projects on Twitter Bookmark FCT Technology Validation: Integrated Projects on Google Bookmark FCT Technology Validation: Integrated Projects on Delicious Rank FCT Technology Validation: Integrated Projects on Digg Find More places to share FCT Technology Validation: Integrated Projects on AddThis.com... Home Transportation Projects Stationary/Distributed Generation Projects Integrated Projects DOE Projects Non-DOE Projects Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Manufacturing Codes & Standards Education Systems Analysis Contacts Integrated Projects To maximize overall system efficiencies, reduce costs, and optimize

37

Water Waves and Integrability  

E-Print Network (OSTI)

The Euler's equations describe the motion of inviscid fluid. In the case of shallow water, when a perturbative asymtotic expansion of the Euler's equations is taken (to a certain order of smallness of the scale parameters), relations to certain integrable equations emerge. Some recent results concerning the use of integrable equation in modeling the motion of shallow water waves are reviewed in this contribution.

Rossen I. Ivanov

2007-07-12T23:59:59.000Z

38

Systems Integration (Fact Sheet)  

DOE Green Energy (OSTI)

The Systems Integration (SI) subprogram works closely with industry, universities, and the national laboratories to overcome technical barriers to the large-scale deployment of solar technologies. To support these goals, the subprogram invests primarily in four areas: grid integration, technology validation, solar resource assessment, and balance of system development.

Not Available

2011-10-01T23:59:59.000Z

39

Integrated assessment briefs  

Science Conference Proceedings (OSTI)

Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

NONE

1995-04-01T23:59:59.000Z

40

On Quantum Integrable Systems  

SciTech Connect

Many quantum integrable systems are obtained using an accelerator physics technique known as Ermakov (or normalized variables) transformation. This technique was used to create classical nonlinear integrable lattices for accelerators and nonlinear integrable plasma traps. Now, all classical results are carried over to a nonrelativistic quantum case. In this paper we have described an extension of the Ermakov-like transformation to the Schroedinger and Pauli equations. It is shown that these newly found transformations create a vast variety of time dependent quantum equations that can be solved in analytic functions, or, at least, can be reduced to time-independent ones.

Danilov, Viatcheslav; /Oak Ridge; Nagaitsev, Sergei; /Fermilab

2011-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

ELECTRONIC INTEGRATING CIRCUIT  

DOE Patents (OSTI)

An electronic integrating circuit using a transistor with a capacitor connected between the emitter and collector through which the capacitor discharges at a rate proportional to the input current at the base is described. Means are provided for biasing the base with an operating bias and for applying a voltage pulse to the capacitor for charging to an initial voltage. A current dividing diode is connected between the base and emitter of the transistor, and signal input terminal means are coupled to the juncture of the capacitor and emitter and to the base of the transistor. At the end of the integration period, the residual voltage on said capacitor is less by an amount proportional to the integral of the input signal. Either continuous or intermittent periods of integration are provided. (AEC)

Englemann, R.H.

1963-08-20T23:59:59.000Z

42

Bioluminescent Bioreporter Integrated Circuits  

To address the need for fieldable real-time biological recognition systems, ORNL researchers developed a "laboratory on a chip" using genetically engineered whole cell biosensors attached to integrated circuits (ICs). These bioluminescent ...

43

Integrated optical isolators  

E-Print Network (OSTI)

Introduction: Optical isolators are important components in lasers. Their main function is to eliminate noise caused by back-reflections into these lasers. The need for integrated isolators comes from the continuing growth ...

Zaman, Tauhid R

2005-01-01T23:59:59.000Z

44

Hanford Tank Integrity Project  

Jordan Follett DST Project Plan and SST Use jordan_r_follet@rl.gov Rick Rast Structural Lead richard_s_rast@rl.gov Ted Venetz SST Integrity Lead theodore_j_venetz@rl.gov

45

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE))

The Integrated Project Team (IPT) is an essential element of the Department’s acquisition process and will be utilized during all phases of a project life cycle. The IPT is a team of professionals...

46

Wellbore Integrity Network  

SciTech Connect

In this presentation, we review the current state of knowledge on wellbore integrity as developed in the IEA Greenhouse Gas Programme's Wellbore Integrity Network. Wells are one of the primary risks to the successful implementation of CO{sub 2} storage programs. Experimental studies show that wellbore materials react with CO{sub 2} (carbonation of cement and corrosion of steel) but the impact on zonal isolation is unclear. Field studies of wells in CO{sub 2}-bearing fields show that CO{sub 2} does migrate external to casing. However, rates and amounts of CO{sub 2} have not been quantified. At the decade time scale, wellbore integrity is driven by construction quality and geomechanical processes. Over longer time-scales (> 100 years), chemical processes (cement degradation and corrosion) become more important, but competing geomechanical processes may preserve wellbore integrity.

Carey, James W. [Los Alamos National Laboratory; Bachu, Stefan [Alberta Innovates

2012-06-21T23:59:59.000Z

47

Integrated XML Document Management  

Science Conference Proceedings (OSTI)

XML has become a widely accepted data format for exchange and representation of semi-structured data. Efficiently managing XML as well as traditional business documents and content in an integrated fashion is a necessity for companies to be successful ...

Hui-I Hsiao; Joshua Hui; Ning Li; Parag Tijare

2003-01-01T23:59:59.000Z

48

Extended Enterprise Integration  

Science Conference Proceedings (OSTI)

This paper discusses the competitive pressures forcing major organisations to co-operate ever more closely in designing, manufacturing and supporting new products and major assets. It explains the resulting business and integration issues and presents ...

J. Gunn

2000-04-01T23:59:59.000Z

49

NREL: Distributed Grid Integration - Solar Distributed Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Distributed Grid Integration Projects Solar Distributed Grid Integration Projects NREL provides grid integration support, system-level testing, and systems analysis for DOE's Solar Distributed Grid Integration Projects supported by the SunShot Initiative. These projects address technical issues and develop solutions for high penetration grid integration of solar technologies into the electric power system to meet the following goals: Reduce cost: reduce interconnection costs by developing streamlined procedures including advanced integration models for utility interconnection of photovoltaics (PV) Reduce market barriers: work with utilities and system integrators to reduce market barriers by providing research on impacts of integration of high penetration of PV systems and developing solutions.

50

Integrated Safety Management Policy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

INTEGRATED SAFETY INTEGRATED SAFETY MANAGEMENT SYSTEM DESCRIPTION U.S. DEPARTMENT OF ENERGY Office of Environmental Management Headquarters May 2008 Preparation: Braj K. sin& Occupational Safety and Health Manager Office of Safety Management Concurrence: Chuan-Fu wu Director, Offlce of Safety Management Deputy Assistant Secretary for safe& Management andoperations Operations Officer for 1 Environmental Management Approval: Date p/-g Date Environmental Management TABLE OF CONTENTS ACRONYMS................................................................................................................................................................v EXECUTIVE SUMMARY .........................................................................................................................................1

51

CIM Application Integration  

Science Conference Proceedings (OSTI)

The EPRI Common Information Model (CIM) has been used as the basis or schema for implementing a real-time relational database in the CIM Application Integration Project. The CIM relational database is implemented in a normalized form so that it can support a complete range of utility transmission, generation, distribution, substation, and asset management applications. The objective of this document is to provide a final report on the CIM Application Integration Project.

2004-02-02T23:59:59.000Z

52

High speed bypass Fig. 1. Sub-module of MMC converter  

E-Print Network (OSTI)

current (HVDC) transmission links are taken into account. The results presented in this paper are able compensators at 150kV substations close to the connection points of HVDC links to Norway and Sweden via HVDC links. The capabilities of 3 HVDC links to Norway are 275MW, 275MW and 500MW

Chaudhary, Sanjay

53

NREL: Energy Systems Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Your name: Your email address: Your message: Send Message Printable Version Energy Systems Integration Home Research & Development Energy Systems Integration Facility Working...

54

NREL: Transmission Grid Integration - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL has an extensive collection of publications related to transmission integration research. Explore the resources below to learn more. Selected Project Publications Read selected publications related to these transmission integration projects: Western Wind and Solar Integration Study Eastern Renewable Generation Integration Study Oahu Wind Integration and Transmission Study Flexible Energy Scheduling Tool for Integration of Variable generation (FESTIV) Active power controls Forecasting Grid Simulation. NREL Publications Database NREL's publications database offers a variety of documents related to transmission integration that were written by NREL staff and

55

Integrity Automotive | Open Energy Information  

Open Energy Info (EERE)

Automotive Jump to: navigation, search Name Integrity Automotive Place Kentucky Product Joint venture between Kentucky businessman Randal Waldman of Integrity Manufacturing and...

56

Integrated curriculum: art as catalyst.  

E-Print Network (OSTI)

??An arts based integrated curriculum plan is what resulted from a look at integrated curriculum and the advantages it has for student learning and success.… (more)

Kiser, Elizabeth

2013-01-01T23:59:59.000Z

57

NREL: Transmission Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Generation Integration Study Oahu Wind Integration and Transmission SIND Toolkit Electricity Market Design Energy Imbalance Markets Flexible Energy Scheduling Tool for...

58

SRS Tank Structural Integrity Program  

integrity management, such as those captured in the SRS and Hanford Structural Integrity Charts, and not isolated to just NDE concerns.

59

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven system engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

Olson, Craig Stott; Conner, Craig C

1999-03-01T23:59:59.000Z

60

Integrating the Integrators - A Roadmap to Success  

SciTech Connect

The U.S. Department of Energy Environmental Management's (DOE-EM) investments in science and technology, as well as science and technology investments associated with other parts of the DOE are aimed at meeting the Departments cleanup goals. These investments, primarily focused on EM's cleanup mission, comprise the Environmental Quality Research and Development (R&D) portfolios. Synchronizing EM's Cleanup Project Managers (operations facility and process owners throughout the DOE complex) operational needs with EM R&D including the extensive work of the six Focus Areas (major thrust areas within DOE-EM) has been a continuing challenge. This recent initiative to better integrate the R&D program is in response to evolving needs within the Department to apply proven systems engineering methods to clarify requirements and define EM's process to effectively orchestrate their R&D Program. To optimize this partnership, DOE-EM's Integration Program is successfully unifying the operational needs with the R&D as described in this paper.

C. Conner; C. Olson

1999-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Integrated Safety Management Workshop Registration, PIA, Idaho...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Integrated...

62

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP)  

E-Print Network (OSTI)

Integrity Lessons from the WAAS Integrity Performance Panel (WIPP) Todd Walter, Per Enge, Stanford that the integrity requirement would be met, the FAA formed the WAAS Integrity Performance Panel (WIPP). The role of the WIPP is to independently assess the safety of WAAS and to recommend system improvements. To accomplish

Stanford University

63

Integrated Micro Nano Systems Integrated Micro Nano Systems  

E-Print Network (OSTI)

#12;Integrated Micro Nano Systems 2 #12;Integrated Micro Nano Systems 3 Val Jones (Ed.) Symposium on Integrated Micro Nano Systems: Convergence of bio and nanotechnologies, Enschede, The Netherlands, June 2006 Micro Nano Systems 4 #12;Integrated Micro Nano Systems 5 Preface In order to explore the convergence

Al Hanbali, Ahmad

64

Integrating Program Component Executables  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Integrating Program Component Executables on Distributed Memory Architectures via MPH Chris Ding and Yun He Computational Research Division, Lawrence Berkeley National Laboratory University of California, Berkeley, CA 94720, USA chqding@lbl.gov, yhe@lbl.gov Abstract A growing trend in developing large and complex ap- plications on today's Teraflop computers is to integrate stand-alone and/or semi-independent program components into a comprehensive simulation package. One example is the climate system model which consists of atmosphere, ocean, land-surface and sea-ice. Each component is semi- independent and has been developed at different institu- tions. We study how this multi-component multi-executable application can run effectively on distributed memory archi- tectures. We identify five effective execution modes and de- velop the MPH library to support

65

Integrating Management Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Mission Execution by Mission Execution by Integrating our Management Systems Integrating our Management Systems 1 W e e k l y O p e r a t i o n s M e e t i n g N o v e m b e r 1 , 2 0 1 1 M i c h a e l J . W e i s Pulling the Pieces Together for Improving DOE Management to Enable Mission Execution 2  Process changes Process changes  Behavioral changes Behavioral changes  System changes System changes Process Change Approach Strengthening and Expediting Decision Making 3 Proposed Outcomes Horizontal Integration Incoming DOE Business Crosscutting Issues (i.e. NLDC input) Hi-level Roadblocks Operations Management Council Associate Deputy Secretary Collaborative Action Process Chief Operating Officer Weekly Operations Council (OMC) Super 8 Secretary (ADS) (CAP) Board (COOB) p Meeting Endorsement / Commitment Super 8 US Meetings COO Meetings

66

Commercial Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings Buildings Integration Program Arah Schuur Program Manager arah.schuur@ee.doe.gov April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Vision Commercial buildings are constructed, operated, renovated and transacted with energy performance in mind and net zero ready commercial buildings are common and cost-effective. Commercial Buildings Integration Program Mission Accelerate voluntary uptake of significant energy performance improvements in existing and new commercial buildings. 3 | Building Technologies Office eere.energy.gov BTO Goals: BTO supports the development and deployment of technologies and systems to reduce

67

Integrated system design report  

DOE Green Energy (OSTI)

The primary objective of the integrated system test phase is to demonstrate the commercial potential of a coal fueled diesel engine in its actual operating environment. The integrated system in this project is defined as a coal fueled diesel locomotive. This locomotive, shown on drawing 41D715542, is described in the separate Concept Design Report. The test locomotive will be converted from an existing oil fueled diesel locomotive in three stages, until it nearly emulates the concept locomotive. Design drawings of locomotive components (diesel engine, locomotive, flatcar, etc.) are included.

Not Available

1989-07-01T23:59:59.000Z

68

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. An antenna connected to the Schottky diode receives a terahertz signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Lee, Mark (Albuquerque, NM); Wanke, Michael C. (Albuquerque, NM)

2009-06-23T23:59:59.000Z

69

Integrated heterodyne terahertz transceiver  

DOE Patents (OSTI)

A heterodyne terahertz transceiver comprises a quantum cascade laser that is integrated on-chip with a Schottky diode mixer. A terahertz signal can be received by an antenna connected to the mixer, an end facet or sidewall of the laser, or through a separate active section that can amplify the incident signal. The quantum cascade laser couples terahertz local oscillator power to the Schottky diode to mix with the received terahertz signal to provide an intermediate frequency output signal. The fully integrated transceiver optimizes power efficiency, sensitivity, compactness, and reliability. The transceiver can be used in compact, fieldable systems covering a wide variety of deployable applications not possible with existing technology.

Wanke, Michael C. (Albuquerque, NM); Lee, Mark (Albuquerque, NM); Nordquist, Christopher D. (Albuquerque, NM); Cich, Michael J. (Albuquerque, NM)

2012-09-25T23:59:59.000Z

70

Smart Grid Integration Laboratory  

Science Conference Proceedings (OSTI)

The initial federal funding for the Colorado State University Smart Grid Integration Laboratory is through a Congressionally Directed Project (CDP), DE-OE0000070 Smart Grid Integration Laboratory. The original program requested in three one-year increments for staff acquisition, curriculum development, and instrumentation â?? all which will benefit the Laboratory. This report focuses on the initial phase of staff acquisition which was directed and administered by DOE NETL/ West Virginia under Project Officer Tom George. Using this CDP funding, we have developed the leadership and intellectual capacity for the SGIC. This was accomplished by investing (hiring) a core team of Smart Grid Systems engineering faculty focused on education, research, and innovation of a secure and smart grid infrastructure. The Smart Grid Integration Laboratory will be housed with the separately funded Integrid Laboratory as part of CSUâ??s overall Smart Grid Integration Center (SGIC). The period of performance of this grant was 10/1/2009 to 9/30/2011 which included one no cost extension due to time delays in faculty hiring. The Smart Grid Integration Laboratoryâ??s focus is to build foundations to help graduate and undergraduates acquire systems engineering knowledge; conduct innovative research; and team externally with grid smart organizations. Using the results of the separately funded Smart Grid Workforce Education Workshop (May 2009) sponsored by the City of Fort Collins, Northern Colorado Clean Energy Cluster, Colorado State University Continuing Education, Spirae, and Siemens has been used to guide the hiring of faculty, program curriculum and education plan. This project develops faculty leaders with the intellectual capacity to inspire its students to become leaders that substantially contribute to the development and maintenance of Smart Grid infrastructure through topics such as: (1) Distributed energy systems modeling and control; (2) Energy and power conversion; (3) Simulation of electrical power distribution system that integrates significant quantities of renewable and distributed energy resources; (4) System dynamic modeling that considers end-user behavior, economics, security and regulatory frameworks; (5) Best practices for energy management IT control solutions for effective distributed energy integration (including security with the underlying physical power systems); (6) Experimental verification of effects of various arrangements of renewable generation, distributed generation and user load types along with conventional generation and transmission. Understanding the core technologies for enabling them to be used in an integrated fashion within a distribution network remains is a benefit to the future energy paradigm and future and present energy engineers.

Wade Troxell

2011-09-30T23:59:59.000Z

71

Hamiltonian systems and symplectic integrators  

Science Conference Proceedings (OSTI)

Keywords: Hamiltonian systems, Runge-Kutta type methods, conservation of energy, symplectic integrators, symplectic stability

Peter Görtz; Rudolf Scherer

1997-12-01T23:59:59.000Z

72

CNST Researchers Develop Integrated Nanomechanical ...  

Science Conference Proceedings (OSTI)

CNST Researchers Develop Integrated Nanomechanical Sensor for Atomic Force Microscopy. June 1, 2011. ...

2011-06-01T23:59:59.000Z

73

Security Outreach and Integration Group  

Science Conference Proceedings (OSTI)

Security Outreach and Integration Group. Welcome. The US economy, citizens, and government rely on information technology. ...

2013-01-17T23:59:59.000Z

74

Discontinuous Function Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Discontinuous Function Integration Discontinuous Function Integration Name: Clarence Status: student Grade: 9-12 Location: CA Country: USA Date: Winter 2011-2012 Question: We know that the area under a continuous function on a certain interval, for instance, [a,b], can be found out by definite integration (taking limit of a sum of areas of rectangles). But when the curve is a discontinuous function, the limit does not exist and is not independent of the choice of the height of rectangle in each delta x. Does it mean that the height in an interval delta x including f(x) of undefined value can be any value so that a limiting value (area under the curve) does not exist? Replies: If I understand your question correctly, here is a way out. The limits of integration are divided into sections [x1,y1] to [x2,y2] over which the function is continuous. Then the next section [x2,y2] to [x3,y3] over which the function is continuous is added to the first section. You can carry this on as long as you need to include each of the separate segments. That is not so hard, but I am not completely sure that is what you are asking. There are some pathological functions where this pasting together does not work so well.

75

Integrated Management Requirements mapping  

Science Conference Proceedings (OSTI)

This document contains five appendices documenting how Sandia implemented the DOE Conduct of Operations (5480.19) and DOE Quality Assurance (5700.6C) orders. It provides a mapping of the Sandia integrated requirements to the specific requirements of each Order and a mapping to Sandia's approved program for implementing the Conduct of Operations Order.

Holmes, J.T.; Andrews, N.S.

1992-06-01T23:59:59.000Z

76

Bioluminescent bioreporter integrated circuit  

DOE Patents (OSTI)

Disclosed are monolithic bioelectronic devices comprising a bioreporter and an OASIC. These bioluminescent bioreporter integrated circuit are useful in detecting substances such as pollutants, explosives, and heavy-metals residing in inhospitable areas such as groundwater, industrial process vessels, and battlefields. Also disclosed are methods and apparatus for environmental pollutant detection, oil exploration, drug discovery, industrial process control, and hazardous chemical monitoring.

Simpson, Michael L. (Knoxville, TN); Sayler, Gary S. (Blaine, TN); Paulus, Michael J. (Knoxville, TN)

2000-01-01T23:59:59.000Z

77

Data Integration Data Analysis  

E-Print Network (OSTI)

Keywords Databases Data Integration Data Analysis Ontology Management » Prof. Dr. Erhard Rahm Prof. Dr. Erhard Rahm and his re- search group focus on advanced methods for data management, in- tegration and analysis of molecular- biological data. They, particularly, have developed comprehensive data

Schüler, Axel

78

The Integral Fast Reactor  

SciTech Connect

Argonne National Laboratory, since 1984, has been developing the Integral Fast Reactor (IFR). This paper will describe the way in which this new reactor concept came about; the technical, public acceptance, and environmental issues that are addressed by the IFR; the technical progress that has been made; and our expectations for this program in the near term. 5 refs., 3 figs.

Till, C.E.; Chang, Y.I. (Argonne National Lab., IL (USA)); Lineberry, M.J. (Argonne National Lab., Idaho Falls, ID (USA))

1990-01-01T23:59:59.000Z

79

Modular Integrated Energy Systems  

E-Print Network (OSTI)

of Honeywell's data collection activity for the integrated energy system (or CHP -- Cooling, Heat and Power recovery steam generator, and a waste heat fired absorption chiller. The key goals of the project are having on-line optimization, · Develop a 1000 Ton exhaust-driven absorption chiller, · Install

Oak Ridge National Laboratory

80

Heat Pipe Integrated Microsystems  

SciTech Connect

The trend in commercial electronics packaging to deliver ever smaller component packaging has enabled the development of new highly integrated modules meeting the demands of the next generation nano satellites. At under ten kilograms, these nano satellites will require both a greater density electronics and a melding of satellite structure and function. Better techniques must be developed to remove the subsequent heat generated by the active components required to-meet future computing requirements. Integration of commercially available electronics must be achieved without the increased costs normally associated with current generation multi chip modules. In this paper we present a method of component integration that uses silicon heat pipe technology and advanced flexible laminate circuit board technology to achieve thermal control and satellite structure. The' electronics/heat pipe stack then becomes an integral component of the spacecraft structure. Thermal management on satellites has always been a problem. The shrinking size of electronics and voltage requirements and the accompanying reduction in power dissipation has helped the situation somewhat. Nevertheless, the demands for increased onboard processing power have resulted in an ever increasing power density within the satellite body. With the introduction of nano satellites, small satellites under ten kilograms and under 1000 cubic inches, the area available on which to place hot components for proper heat dissipation has dwindled dramatically. The resulting satellite has become nearly a solid mass of electronics with nowhere to dissipate heat to space. The silicon heat pipe is attached to an aluminum frame using a thermally conductive epoxy or solder preform. The frame serves three purposes. First, the aluminum frame provides a heat conduction path from the edge of the heat pipe to radiators on the surface of the satellite. Secondly, it serves as an attachment point for extended structures attached to the satellite such as solar panels, radiators, antenna and.telescopes (for communications or sensors). Finally, the packages make thermal contact to the surface of the silicon heat pipe through soft thermal pads. Electronic components can be placed on both sides of the flexible circuit interconnect. Silicon heat pipes have a number of advantages over heat pipe constructed from other materials. Silicon heat pipes offer the ability to put the heat pipe structure beneath the active components of a processed silicon wafer. This would be one way of efficiently cooling the heat generated by wafer scale integrated systems. Using this technique, all the functions of a satellite could be reduced to a few silicon wafers. The integration of the heat pipe and the electronics would further reduce the size and weight of the satellite.

Gass, K.; Robertson, P.J.; Shul, R.; Tigges, C.

1999-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Integrated Deployment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Deployment Integrated Deployment Integrated Deployment Integrated technology deployment uses a comprehensive approach to implement a variety of efficiency and renewable energy technology solutions in communities and cities, federal agencies, international locations, and states and territories. need_alt Community Renewable Energy Deployment Webinars Hear about successful community renewable energy projects, including the challenges and barriers faced during development. Learn more Integrated Deployment Projects The following projects provide examples of how the U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory have used an integrated approach to address various location-specific energy challenges that is both scalable and replicable around the world:

82

Integrated Assessment | Open Energy Information  

Open Energy Info (EERE)

Integrated Assessment Integrated Assessment Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Integrated Assessment: Mainstreaming sustainability into policymaking--A guidance manual Agency/Company /Organization: United Nations Environment Programme Topics: Background analysis Website: www.unep.ch/etb/publications/AI%20guidance%202009/UNEP%20IA%20final.pd Equivalent URI: cleanenergysolutions.org/content/times-integrated-assessment-model-0,h Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: Integrated Assessment[1] The Times Integrated Assessment Model (TIAM) comprises several thousand technologies in all sectors of the energy system. It is characterized by several technical and economic parameters and by emission coefficients for

83

Roadmap Integration Team Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Presentation Presentation NP03-00 Slide 1 Generation IV Technology Roadmap NERAC Meeting: Washington, D.C. September 30, 2002 Roadmap Integration Team Presentation NP03-00 Slide 2 NERAC Meeting September 30, 2002 Generation IV Technology Roadmap * Identifies systems deployable by 2030 or earlier * Specifies six systems that offer significant advances towards: - Sustainability - Economics - Safety and reliability - Proliferation resistance and physical protection * Summarizes R&D activities and priorities for the systems * Lays the foundation for Generation IV R&D program plans Roadmap Integration Team Presentation NP03-00 Slide 3 NERAC Meeting September 30, 2002 The Technical Roadmap Report * Discusses the benefits, goals and challenges, and the importance of the fuel cycle * Describes evaluation and selection process

84

Integrated Project Team RM  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team (IPT) Review Module Integrated Project Team (IPT) Review Module March 2010 CD-0 This R O 0 Review Modul OFFICE OF Inte C CD-1 le was piloted F ENVIRO Standard R grated P Rev Critical Decis CD-2 M at the OR U 23 incorporated ONMENTAL Review Plan Project Te view Module sion (CD) Ap CD March 2010 33 Disposition in the Review L MANAGE n (SRP) eam (IPT e pplicability D-3 Project in 200 Module. EMENT T) CD-4 09. Lessons lea Post Ope arned have been eration n Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM

85

Nonlinear integrable ion traps  

Science Conference Proceedings (OSTI)

Quadrupole ion traps can be transformed into nonlinear traps with integrable motion by adding special electrostatic potentials. This can be done with both stationary potentials (electrostatic plus a uniform magnetic field) and with time-dependent electric potentials. These potentials are chosen such that the single particle Hamilton-Jacobi equations of motion are separable in some coordinate systems. The electrostatic potentials have several free adjustable parameters allowing for a quadrupole trap to be transformed into, for example, a double-well or a toroidal-well system. The particle motion remains regular, non-chaotic, integrable in quadratures, and stable for a wide range of parameters. We present two examples of how to realize such a system in case of a time-independent (the Penning trap) as well as a time-dependent (the Paul trap) configuration.

Nagaitsev, S.; /Fermilab; Danilov, V.; /SNS Project, Oak Ridge

2011-10-01T23:59:59.000Z

86

ORNL integrated forecasting system  

SciTech Connect

This paper describes the integrated system for forecasting electric energy and load. In the system, service area models of electrical energy (kWh) and load distribution (minimum and maximum loads and load duration curve) are linked to a state-level model of electrical energy (kWh). Thus, the service area forecasts are conditional upon the state-level forecasts. Such a linkage reduces considerably the data requirements for modeling service area electricity demand.

Rizy, C.G.

1983-01-01T23:59:59.000Z

87

Integration of Renewables: Preprint  

DOE Green Energy (OSTI)

This is an overview of renewable energy technologies, especially those that can be used for distributed generation of electricity or heat. It This paper reviews the types of technologies, their present usage in the United States, their advantages in terms of resources, availability, modularity, emissions, and integration in distributed energy systems. It reviews some of the history of their use and projects their growth and cost.

Bull, S.

2004-11-01T23:59:59.000Z

88

SAMGrid integration of SRMs  

SciTech Connect

SAMGrid is the shared data handling framework of the two large Fermilab Run II collider experiments: DZero and CDF. In production since 1999 at D0, and going into production at CDF, the SAMGrid framework has been adapted over time to accommodate a variety of storage solutions and configurations, as well as the differing data processing models of these two experiments. This has been very successful for both experiments. Backed by primary data repositories of approximately 1 PB in size for each experiment, the SAMGrid framework delivers over 100 TB/day to DZero and CDF analyses at Fermilab and around the world. Each of the storage systems used with SAMGrid, however, has distinct interfaces, protocols, and behaviors. This led to different levels of integration of the various storage devices into the framework, which complicated the exploitation of their functionality and limited in some cases SAMGrid expansion across the experiments Grid. In an effort to simplify the SAMGrid storage interfaces, SAMGrid is adopting the Storage Resource Manager (SRM) concept as the universal interface to all storage devices. This simplifies the SAMGrid framework, especially the implementation of storage device interactions. It prepares the SAMGrid framework for future storage solutions equipped with SRM interfaces, without the need for long and risky software integration projects. In principle, any storage device with an SRM interface can be used with the SAMGrid framework. The integration of SRMs is an important further step towards evolving the SAMGrid framework into a co-operating collection of distinct, modular grid-oriented services. This report outlines how the SRMs are being integrated into the existing SAMGrid framework without disturbing on-going operations.

Kennedy, R.D.; Baranovski, A.; Garzoglio, G.; Illingworth, R.; Kreymer, A.; Kumar, A.; Loebel-Carpenter, L.; Lueking, L.; Lyon, A.; Merritt, W.; Terekhov, I.; Trumbo, J.; Veseli, S.; White, S.; /Fermilab; Burgon-Lyon, M.; St. Denis, R.; /Glasgow U.; Belforte, S.; /INFN, Trieste; Kerzel, U.; /Karlsruhe U.; Bartsch, V.; Leslie, M.; Stonjek, S.; /Oxford

2004-12-01T23:59:59.000Z

89

Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings  

SciTech Connect

This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

2013-01-01T23:59:59.000Z

90

January 2005 INTEGRATING IT SECURITY  

E-Print Network (OSTI)

January 2005 INTEGRATING IT SECURITY INTO THE CAPITAL PLANNING AND INVESTMENT CONTROL PROCESS By Joan S. Hash, Computer Security Division, Information Technology Laboratory, National Institute of Standards and Technology Introduction To assist federal agencies with effec tively integrating security

91

Integrating Materials and Manufacturing Innovation  

Science Conference Proceedings (OSTI)

Jun 13, 2012 ... 06/13 - TMS Launches New Open Access Journal: Integrating Materials and Manufacturing Innovation. Patti Dobranski Communication ...

92

Integrated Computational Materials Engineering (ICME)  

Science Conference Proceedings (OSTI)

Presentation Title, Integrated Computational Materials Engineering (ICME) in the Automotive Industry: Successes and Opportunities. Author(s), Louis Gerard ...

93

Residential Buildings Integration Program  

NLE Websites -- All DOE Office Websites (Extended Search)

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

94

Scientific Innovation Through Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

pnnl.gov pnnl.gov Cell Isolation and Systems Analysis Multi-photon fluorescence microscope: Seamlessly integrates nonlinear two-photon excitation, laser scanning confocal microscopy and fluorescence lifetime imaging (FLIM) for minimally invasive and deep-penetrating 3D imaging of living tissues and cells as well as quantitative investigation of molecular interaction dynamics by fluorescence resonance energy transfer (FRET) in living cells. Transcriptional profiling using next-generation sequencing technology (RNA-Seq): Offers massively parallel next-generation sequencing platforms for unbiased and quantitative profiling of gene expression patterns in prokaryotic and eukaryotic cells, complete with facilities for sample preparation as well as data processing and analysis.

95

Residential Buildings Integration Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

David Lee David Lee Program Manager David.Lee@ee.doe.gov 202-287-1785 April 2, 2013 Residential Buildings Integration Program Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov Sub-Programs for Review Better Buildings Neighborhood Program Building America Challenge Home Home Energy Score Home Performance with ENERGY STAR Solar Decathlon 3 | Building Technologies Office eere.energy.gov How Residential Buildings Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers

96

Integrated optical XY coupler  

DOE Patents (OSTI)

An integrated optical XY coupler having two converging input waveguide arms meeting in a central section and a central output waveguide arm and two diverging flanking output waveguide arms emanating from the central section. In-phase light from the input arms constructively interfers in the central section to produce a single mode output in the central output arm with the rest of the light being collected in the flanking output arms. Crosstalk between devices on a substrate is minimized by this collection of the out-of-phase light by the flanking output arms of the XY coupler.

Vawter, G. Allen (Albuquerque, NM); Hadley, G. Ronald (Albuquerque, NM)

1997-01-01T23:59:59.000Z

97

Repast vector GIS integration.  

Science Conference Proceedings (OSTI)

Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast.

Najlis, R.; North, M. J.; Decision and Information Sciences

2005-01-01T23:59:59.000Z

98

Integrated Assessment Modeling  

Science Conference Proceedings (OSTI)

This paper discusses the role of Integrated Assessment models (IAMs) in climate change research. IAMs are an interdisciplinary research platform, which constitutes a consistent scientific framework in which the large-scale interactions between human and natural Earth systems can be examined. In so doing, IAMs provide insights that would otherwise be unavailable from traditional single-discipline research. By providing a broader view of the issue, IAMs constitute an important tool for decision support. IAMs are also a home of human Earth system research and provide natural Earth system scientists information about the nature of human intervention in global biogeophysical and geochemical processes.

Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.; Janetos, Anthony C.; Kim, Son H.; Wise, Marshall A.; McJeon, Haewon C.

2012-10-31T23:59:59.000Z

99

HLW System Integrated Project Team  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

l l W S Hi h l W S High Level Waste System High Level Waste System Integrated Project Team Integrated Project Team Integrated Project Team Integrated Project Team Steve Schneider Steve Schneider Office of Engineering and Technology High Level Waste Corporate Board March 5, 2009 This document is intended for planning and analysis purposes, assuming a continuing constrained budget environment. Every effort will be made to comply with all applicable environmental and legal obligations, while also assuring that essential functions necessary to protect human health, the environment and national security are maintained. 1 Introduction Introduction Introduction Introduction Challenges and Priorities High Level Waste Strategic Initiative Results High Level Waste System Integrated

100

Fuel Cell Technologies Office: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by E-mail Share Fuel Cell Technologies Office: Systems Integration on Facebook Tweet about Fuel Cell Technologies Office: Systems Integration on...

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

NREL: Energy Systems Integration - Residential and Commercial...  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential and Commercial Integration Energy systems integration R&D at the small-scale, residential and commercial integration level encompasses diverse technologies such as...

102

Integrating preconcentrator heat controller  

DOE Patents (OSTI)

A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

2007-10-16T23:59:59.000Z

103

Building-integrated photovoltaics  

SciTech Connect

This is a study of the issues and opportunities for building-integrated PV products, seen primarily from the perspective of the design community. Although some quantitative analysis is included, and limited interviews are used, the essence of the study is qualitative and subjective. It is intended as an aid to policy makers and members of the technical community in planning and setting priorities for further study and product development. It is important to remember that the success of a product in the building market is not only dependent upon its economic value; the diverse group of building owners, managers, regulators, designers, tenants and users must also find it practical, aesthetically appealing and safe. The report is divided into 11 sections. A discussion of technical and planning considerations is followed by illustrative diagrams of different wall and roof assemblies representing a range of possible PV-integration schemes. Following the diagrams, several of these assemblies are then applied to a conceptual test building which is analyzed for PV performance. Finally, a discussion of mechanical/electrical building products incorporating PVs is followed by a brief surveys of cost issues, market potential and code implications. The scope of this report is such that most of the discussion does not go beyond stating the questions. A more detailed analysis will be necessary to establish the true costs and benefits PVs may provide to buildings, taking into account PV power revenue, construction costs, and hidden costs and benefits to building utility and marketability.

1993-01-01T23:59:59.000Z

104

CLASIC DATA INTEGRATION  

NLE Websites -- All DOE Office Websites (Extended Search)

Precipitating Clouds in the Southern Great Plains Region Oklahoma Radar Facilities S-band: Operational WSR-88D Network KOUN Polarimetric (NSSL) MPAR Phased Array (NSSL) C-band: Polarimetric (OU/EEC) Mobile SMART-R (OU et. al) TDWR (FAA) X-band: CASA Polarimetric IP1 Mobile Polarimetric (NSSL) Ka-band: MMCR, Central Facility (ARM) W-band: WACR, Central Facility (ARM) Profiler: ARM, NOAA Oklahoma Instrumentation Oklahoma Mesonet (Oklahoma) ARS Micronet (USDA) ARM SGP Facilities (DOE) Oklahoma Lightning Mapping Array, NLDN NOAA Profiler Network Kessler Farm Field Laboratory ASOS, AWOS, AWSS (FAA/NWS/DOD) ARM & Oklahoma Dataset Integration: Examples Oklahoma Radar  CASA radars offer unique 2D/3D wind retrieval

105

Integrated Facilities Disposition Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Facilities Disposition Program Tank Waste Corporate Board Meeting at ORNL Sharon Robinson Dirk Van Hoesen Robert Jubin Brad Patton July 29, 2009 2 Managed by UT-Battelle for the U.S. Department of Energy The Integrated Facility Disposition Program (IFDP) addresses the remaining EM Scope at both ORNL and Y-12 Cost Range: $7 - $14B Schedule: 26 Years 3 Managed by UT-Battelle for the U.S. Department of Energy Scope of work * Treatment and disposition of legacy materials and waste * D&D 327 (1.5 M ft 2 ) excess facilities generating >2 M yd 3 debris * Soil and groundwater remedial actions generating >1 M yd 3 soils * Facilities surveillance and maintenance * Reconfiguration of waste management facilities * Ongoing waste management operations * Project management

106

Integrated Safety Management  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Day: March 10, 2010 ISM Day: March 10, 2010 ISM Day: June 6, 2008 Integrated Safety Management (ISM) Seven Principles of ISM Five Functions of ISM "Define the Scope of Work" Is the work clearly defined? Authorized? Do I know how to do the job? Do I have the proper equipment? Support? Have there been problems with tasks like this? "Analyze the Hazards" What are the hazards of the job? What can go wrong? Has the job been reviewed by a qualified person? "Develop Hazard Controls" Are all the necessary controls in place? (LOTO, PPE, Procedures etc.) Do I know what the controls are, and how to use them? What if something unexpected goes wrong? "Perform Work" Has the system responded as expected? How do I know? When will I call for assistance or stop work?

107

Integrated optical sensor  

SciTech Connect

An integrated optical sensor for arc welding having multifunction feedback control. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties.

Watkins, Arthur D. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Taylor, Paul L. (Idaho Falls, ID)

1994-01-01T23:59:59.000Z

108

Integrated optical sensor  

DOE Patents (OSTI)

An integrated optical sensor for arc welding having multifunction feedback control is described. The sensor, comprising generally a CCD camera and diode laser, is positioned behind the arc torch for measuring weld pool position and width, standoff distance, and post-weld centerline cooling rate. Computer process information from this sensor is passed to a controlling computer for use in feedback control loops to aid in the control of the welding process. Weld pool position and width are used in a feedback loop, by the weld controller, to track the weld pool relative to the weld joint. Sensor standoff distance is used in a feedback loop to control the contact tip to base metal distance during the welding process. Cooling rate information is used to determine the final metallurgical state of the weld bead and heat affected zone, thereby controlling post-weld mechanical properties. 6 figures.

Watkins, A.D.; Smartt, H.B.; Taylor, P.L.

1994-01-04T23:59:59.000Z

109

Integrated fluorescence analysis system  

DOE Patents (OSTI)

An integrated fluorescence analysis system enables a component part of a sample to be virtually sorted within a sample volume after a spectrum of the component part has been identified from a fluorescence spectrum of the entire sample in a flow cytometer. Birefringent optics enables the entire spectrum to be resolved into a set of numbers representing the intensity of spectral components of the spectrum. One or more spectral components are selected to program a scanning laser microscope, preferably a confocal microscope, whereby the spectrum from individual pixels or voxels in the sample can be compared. Individual pixels or voxels containing the selected spectral components are identified and an image may be formed to show the morphology of the sample with respect to only those components having the selected spectral components. There is no need for any physical sorting of the sample components to obtain the morphological information.

Buican, Tudor N. (Los Alamos, NM); Yoshida, Thomas M. (Los Alamos, NM)

1992-01-01T23:59:59.000Z

110

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

J. Marvin Herndon

2005-10-04T23:59:59.000Z

111

Georeactor Variability and Integrity  

E-Print Network (OSTI)

As a deep-Earth energy source, the planetocentric nuclear-fission georeactor concept is on a more secure scientific footing than the previous idea related to the assumed growth of the inner core. Unlike previously considered deep-Earth energy sources, which are essentially constant on a human time-scale, variability in nuclear fission reactors can arise from changes in composition and/or position of fuel, moderators, and neutron absorbers. Tantalizing circumstantial evidence invites inquiry into the possibility of short-term planetocentric nuclear fission reactor variability. This brief communication emphasizes the importance of scientific integrity and highlights the possibility of variable georeactor power output so that these might be borne in mind in future investigations, especially those related to the Earth's heat flux.

Herndon, J M

2005-01-01T23:59:59.000Z

112

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Borut Bajc; Arshad Momen; Goran Senjanovi?

2011-02-17T23:59:59.000Z

113

Classicalization via Path Integral  

E-Print Network (OSTI)

Recently, it was suggested that a large class of non-renormalizable theories may need no UV completion. By analogy with gravity where classical black holes are expected to be created in high-energy scatterings, it is conjectured that similar classical solutions, so-called classicalons, should occur. In this way the theory protects itself against non-unitarity, for instead of probing small distances at high energies one enters a classical regime. An effective theory of Goldstone bosons provides and example in which the size of classicalons grows with energy, and the high energy scattering is cut-off by small momenta, inversely proportional to the classicalon size. In this note we offer an alternative, path integral discussion of this important result.

Bajc, Borut; Senjanovi?, Goran

2011-01-01T23:59:59.000Z

114

Integrated formal operations plan  

SciTech Connect

The concept of formal operations (that is, a collection of business practices to assure effective, accountable operations) has vexed the Laboratory for many years. To date most attempts at developing such programs have been based upon rigid, compliance-based interpretations of a veritable mountain of Department of Energy (DOE) orders, directives, notices, and standards. These DOE dictates seldom take the broad view but focus on highly specialized programs isolated from the overall context of formal operations. The result is a confusing array of specific, and often contradictory, requirements that produce a patchwork of overlapping niche programs. This unnecessary duplication wastes precious resources, dramatically increases the complexity of our work processes, and communicates a sense of confusion to our customers and regulators. Coupled with the artificial divisions that have historically existed among the Laboratory`s formal operations organizations (quality assurance, configuration management, records management, training, etc.), this approach has produced layers of increasingly vague and complex formal operations plans, each of which interprets its parent and adds additional requirements of its own. Organizational gridlock ensues whenever an activity attempts to implement these bureaucratic monstrosities. The integrated formal operations plan presented is to establish a set of requirements that must be met by an integrated formal operations program, assign responsibilities for implementation and operation of the program, and specify criteria against which the performance of the program will be measured. The accountable line manager specifies the items, processes, and information (the controlled elements) to which the formal operations program specified applies. The formal operations program is implemented using a graded approach based on the level of importance of the various controlled elements and the scope of the activities in which they are involved.

Cort, G.; Dearholt, W.; Donahue, S.; Frank, J.; Perkins, B.; Tyler, R.; Wrye, J.

1994-01-05T23:59:59.000Z

115

Application of mixed mode integration and new implicit inline integration at Toyota  

E-Print Network (OSTI)

This paper reports results from applying inline integration and mixed mode integration to two real applications

S. Soejima; T. Matsuba

2002-01-01T23:59:59.000Z

116

SunShot Initiative: Transmission Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Transmission Grid Integration to Transmission Grid Integration to someone by E-mail Share SunShot Initiative: Transmission Grid Integration on Facebook Tweet about SunShot Initiative: Transmission Grid Integration on Twitter Bookmark SunShot Initiative: Transmission Grid Integration on Google Bookmark SunShot Initiative: Transmission Grid Integration on Delicious Rank SunShot Initiative: Transmission Grid Integration on Digg Find More places to share SunShot Initiative: Transmission Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

117

SunShot Initiative: Distribution Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Distribution Grid Integration to Distribution Grid Integration to someone by E-mail Share SunShot Initiative: Distribution Grid Integration on Facebook Tweet about SunShot Initiative: Distribution Grid Integration on Twitter Bookmark SunShot Initiative: Distribution Grid Integration on Google Bookmark SunShot Initiative: Distribution Grid Integration on Delicious Rank SunShot Initiative: Distribution Grid Integration on Digg Find More places to share SunShot Initiative: Distribution Grid Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Distribution Grid Integration Transmission Grid Integration Solar Resource Assessment Technology Validation Power Electronics & Balance of System Hardware Technologies Competitive Awards

118

NREL: Electricity Integration Research - Facilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities NREL's electricity integration research is conducted in state-of-the-art facilities. These facilities assist industry in the development of power systems and address the operational challenges of full system integration. The Energy Systems Integration Facility can be used to design, test, and analyze components and systems to enable economic, reliable integration of renewable electricity, fuel production, storage, and building efficiency technologies with the U.S. electricity delivery infrastructure. New grid integration capabilities at the National Wind Technology Center will allow testing of many grid integration aspects of multi-megawatt, utility-scale variable renewable generation and storage technologies. The Distributed Energy Resources Test Facility can be used to characterize,

119

Fuel Pathways Integration Tech Team  

NLE Websites -- All DOE Office Websites (Extended Search)

- Roxanne Danz (DOE) - Dale Gardner (DOE Systems Integration) - Don Gardner (ExxonMobil) - Johanna Ivy (NREL) - Melissa Lott (QSS Group) - Graham Moore (ChevronTexaco) -...

120

NREL: Energy Systems Integration - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Events NREL hosts events that promote understanding and collaboration on energy systems integration. Through seminars, workshops, and other educational opportunities, industry...

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

NREL: Energy Systems Integration - News  

NLE Websites -- All DOE Office Websites (Extended Search)

News Energy Systems Integration eNewsletter is a quarterly newsletter designed to keep industry partners, stakeholders, associations, and educational institutes up to date on the...

122

Data Integration using Web Services  

E-Print Network (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the ...

Hansen, Mark

2003-02-10T23:59:59.000Z

123

Integrated Safety Management (ISM) - Oversight  

NLE Websites -- All DOE Office Websites (Extended Search)

Oversight Integrated Safety Management (ISM) ism logo DOE Oversight Policy PDF (P 226.1B) DOE Oversight Order PDF (O 226.1B) Draft CRADs...

124

NREL: Energy Systems Integration - Workshops  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Facility (ESIF) workshops. October 2012: Increasing the Value of Microgrids through Focused RD&D Information included an overview of commercial microgrids,...

125

NREL: Transmission Grid Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

reply. Your name: Your email address: Your message: Send Message Printable Version Transmission Grid Integration Home Issues Projects Research Staff Working with Us Publications...

126

Biomass Pretreatment for Integrated Steelmaking  

Science Conference Proceedings (OSTI)

Presentation Title, Biomass Pretreatment for Integrated Steelmaking. Author(s), Shiju Thomas, Paul Cha, Steven J McKnight, Vincent A Bouma, Andrew L Petrik,

127

Advanced Integrated Traction System  

SciTech Connect

The United States Department of Energy elaborates the compelling need for a commercialized competitively priced electric traction drive system to proliferate the acceptance of HEVs, PHEVs, and FCVs in the market. The desired end result is a technically and commercially verified integrated ETS (Electric Traction System) product design that can be manufactured and distributed through a broad network of competitive suppliers to all auto manufacturers. The objectives of this FCVT program are to develop advanced technologies for an integrated ETS capable of 55kW peak power for 18 seconds and 30kW of continuous power. Additionally, to accommodate a variety of automotive platforms the ETS design should be scalable to 120kW peak power for 18 seconds and 65kW of continuous power. The ETS (exclusive of the DC/DC Converter) is to cost no more than $660 (55kW at $12/kW) to produce in quantities of 100,000 units per year, should have a total weight less than 46kg, and have a volume less than 16 liters. The cost target for the optional Bi-Directional DC/DC Converter is $375. The goal is to achieve these targets with the use of engine coolant at a nominal temperature of 105C. The system efficiency should exceed 90% at 20% of rated torque over 10% to 100% of maximum speed. The nominal operating system voltage is to be 325V, with consideration for higher voltages. This project investigated a wide range of technologies, including ETS topologies, components, and interconnects. Each technology and its validity for automotive use were verified and then these technologies were integrated into a high temperature ETS design that would support a wide variety of applications (fuel cell, hybrids, electrics, and plug-ins). This ETS met all the DOE 2010 objectives of cost, weight, volume and efficiency, and the specific power and power density 2015 objectives. Additionally a bi-directional converter was developed that provides charging and electric power take-off which is the first step towards enabling a smart-grid application. GM under this work assessed 29 technologies; investigated 36 configurations/types power electronics and electric machines, filed 41 invention disclosures; and ensured technology compatibility with vehicle production. Besides the development of a high temperature ETS the development of industrial suppliers took place because of this project. Suppliers of industrial power electronic components are numerous, but there are few that have traction drive knowledge. This makes it difficult to achieve component reliability, durability, and cost requirements necessary of high volume automotive production. The commercialization of electric traction systems for automotive industry requires a strong diverse supplier base. Developing this supplier base is dependent on a close working relationship between the OEM and supplier so that appropriate component requirements can be developed. GM has worked closely with suppliers to develop components for electric traction systems. Components that have been the focus of this project are power modules, capacitors, heavy copper boards, current sensors, and gate drive and controller chip sets. Working with suppliers, detailed component specifications have been developed. Current, voltage, and operation environment during the vehicle drive cycle were evaluated to develop higher resolution/accurate component specifications.

Greg Smith; Charles Gough

2011-08-31T23:59:59.000Z

128

Integrated fuel processor development.  

DOE Green Energy (OSTI)

The Department of Energy's Office of Advanced Automotive Technologies has been supporting the development of fuel-flexible fuel processors at Argonne National Laboratory. These fuel processors will enable fuel cell vehicles to operate on fuels available through the existing infrastructure. The constraints of on-board space and weight require that these fuel processors be designed to be compact and lightweight, while meeting the performance targets for efficiency and gas quality needed for the fuel cell. This paper discusses the performance of a prototype fuel processor that has been designed and fabricated to operate with liquid fuels, such as gasoline, ethanol, methanol, etc. Rated for a capacity of 10 kWe (one-fifth of that needed for a car), the prototype fuel processor integrates the unit operations (vaporization, heat exchange, etc.) and processes (reforming, water-gas shift, preferential oxidation reactions, etc.) necessary to produce the hydrogen-rich gas (reformate) that will fuel the polymer electrolyte fuel cell stacks. The fuel processor work is being complemented by analytical and fundamental research. With the ultimate objective of meeting on-board fuel processor goals, these studies include: modeling fuel cell systems to identify design and operating features; evaluating alternative fuel processing options; and developing appropriate catalysts and materials. Issues and outstanding challenges that need to be overcome in order to develop practical, on-board devices are discussed.

Ahmed, S.; Pereira, C.; Lee, S. H. D.; Krumpelt, M.

2001-12-04T23:59:59.000Z

129

Systems Integration Methodology  

Science Conference Proceedings (OSTI)

A multi-disciplinary team led by the Advanced Power and Energy Program (APEP) of the University of California at Irvine is defining the system engineering issues associated with the integration of key components and subsystems into power plant systems that meet performance and emission goals of VISION 21. The myriad of fuels, fuel processing, power generation, and emission control technologies are narrowed down to selected scenarios by a screening analysis to identify those combinations that have the potential to achieve the VISION 21 goals consisting of 60% efficiency (HHV) for coal based systems and 75% efficiency (LHV) for gas-based systems. The selected promising cycle scenarios are then analyzed in detail to develop the performance and costs for each. The methodology used in arriving at these promising cases and the preliminary results of the cycle analyses are presented. The technology levels considered are based on projected technical and manufacturing advances being made in industry and on advances identified in current and future government supported research such as the Clean Coal Program, Combustion 2000 (LEBS and HIPPS), Advanced Turbine Systems program, Low-Cost Advanced Fuel Cell programs, and the Flexible Gas Turbine Systems program. Examples of systems included in these advanced cycles are solid oxide and molten carbonate fuel cells, advanced gas turbines, ion transport membrane separation and hydrogen-oxygen combustion.

Samuelsen, Scott; Rao, Ashok

2001-11-06T23:59:59.000Z

130

Repast Vector GIS Integration  

E-Print Network (OSTI)

This paper will elucidate the creation of agents based on GIS data, as well as how to work with and display those agents. Specific attention is given to the usage of both ArcMap and OpenMap. Contact: 9700 S. Cass Avenue, Argonne, IL 60439 Tel: 1-917-703-4633 Email: rnajlis@anl.gov Key Words: Agent-Based Modeling and Simulation, Repast, GIS, Geographic Information Systems, Repast, ArcMap, OpenMap Robert Najlis, Michael J. North Repast now supports the reading, writing, and display of shapefile data. In the Repast-GIS integration, these tasks are generally broken up into two different classes, a data class, and a display class. The data class allows data to be read into Repast from the GIS, and written out from Repast into a GIS format. The current implementation of GIS in Repast is focused on two systems: ESRI ArcMap and OpenMap. This paper will elucidate how to use each of these systems with Repast. Getting started: Choosing your data and display classes Each GIS system used with Re

Robert Najlis; Robert Najlis; Robert Najlis; Michael J. North; Michael J. North

2005-01-01T23:59:59.000Z

131

Integral transformation and Darboux transformation  

E-Print Network (OSTI)

We review Darboux-Crum transformation of Heun's differential equation. By rewriting an integral transformation of Heun's differential equation into a form of elliptic functions, we see that the integral representation is a generalization of Darboux-Crum transformation. We also consider conservation of monodromy with respect to the transformations.

Takemura, Kouichi

2009-01-01T23:59:59.000Z

132

CFT, Integrable Models Liouville Gravity  

E-Print Network (OSTI)

CFT, Integrable Models And Liouville Gravity Chernogolovka 2009 Sunday June 28, 2009. Conference as one of components of their L, A pairs. #12;CFT, Integrable Models And Liouville Gravity Chernogolovka Gravity Chernogolovka, 2009 Tuesday June 30, 2009. CONFERENCE HALL 09:30­10:10 Herman Boos (Wuppertal

Fominov, Yakov

133

HGIP: Haitian government integrated platform  

Science Conference Proceedings (OSTI)

This paper describes the HGIP initiative to equip Haitian government with an integrated system to monitor reconstruction efforts and improve governance. In its current status, this IDB funded project is seeking to integrate various systems and databases ... Keywords: e-governance, inter-organizational information sharing, public administration reform, whole-of-government approach

Carl Sherson Clermont

2011-09-01T23:59:59.000Z

134

Integrated Transportation System Design Optimization  

E-Print Network (OSTI)

Integrated Transportation System Design Optimization by Christine Taylor B.S. Cornell University by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Professor Jaime Peraire Chairman, Department Graduate Committee #12;2 #12;Integrated Transportation System Abstract Traditionally, the design of a transportation system has focused on either the vehicle design

135

NREL: Transmission Grid Integration - Oahu Wind Integration and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Agreement. The agreement includes a commitment to integrate up to 400 megawatts (MW) of offshore wind energy from Molokai or Lanai and transmit it to Oahu via undersea cable...

136

NREL: Distributed Grid Integration - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Projects Projects Photo of two NREL engineers sitting in front of two computer monitors, discussing a project. NREL engineers work on data capture for micro-grid synchronization waveforms. Photo by Dennis Schroeder, NREL. NREL's distributed energy projects support the integration of new technologies into the electric power grid. This work involves industry, academia, other national laboratories, and various standards organizations. Learn more about our projects: Codes and standards Data collection and visualization Hawaii Clean Energy Initiative Microgrids Power systems modeling Solar Distributed Grid Integration (SunShot) Technology development Vehicle-to-Grid (V2G) Wind2Battery Printable Version Distributed Grid Integration Home Capabilities Projects Codes & Standards

137

Fully Integrating the Design Process  

SciTech Connect

The basic approach to designing nuclear facilities in the United States does not currently reflect the routine consideration of proliferation resistance and international safeguards. The fully integrated design process is an approach for bringing consideration of international safeguards and proliferation resistance, together with state safeguards and security, fully into the design process from the very beginning, while integrating them sensibly and synergistically with the other project functions. In view of the recently established GNEP principles agreed to by the United States and at least eighteen other countries, this paper explores such an integrated approach, and its potential to help fulfill the new internationally driven design requirements with improved efficiencies and reduced costs.

T.A. Bjornard; R.S. Bean

2008-03-01T23:59:59.000Z

138

Research Integrity | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

About ORNL About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Environmental Policy Corporate Giving Research Integrity Who we are, aren't About ORNL Home | ORNL | About ORNL | Research Integrity SHARE Research Integrity From the Director ORNL Research Code of Conduct Research Misconduct ORNL Policy on Research Integrity From the Director We enjoy an excellent scientific reputation at ORNL, thanks to a solid record of ethical conduct in every aspect of research. It is essential to our future that we maintain and nurture this reputation. We also have a responsibility to mentor the next generation of researchers to ensure that they too understand and adhere to the highest standards of ethical conduct. ORNL's Research Code of Conduct was developed by a committee of

139

NREL's Energy Systems Integration Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL's Energy Systems Integration Facility Speaker(s): Benjamin Kroposki Date: January 14, 2013 - 12:00pm Location: 90-1099 Seminar HostPoint of Contact: Sila Kiliccote The...

140

NREL: Transmission Grid Integration - Webinars  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinars Webinars Want updates about future transmission grid integration webinars and publications? Join our mailing list. NREL periodically offers webinars on transmission grid integration topics to provide insight into its research. Explore the resources below to learn more. Upcoming Webinars Please check back. Details on future meetings and workshops will be posted as they are available. Past Webinars Results from The Western Wind and Solar Integration Study Phase 2: An examination of how wind and solar power affect operations, costs, and emissions from fossil-fueled generators Wednesday, September 25, 2013 at 12:00 EDT (10:00 MDT) The Western Wind and Solar Integration Study Phase 2 (WWSIS-2), launched in 2011, examines the potential impacts of up to 33% wind and solar energy

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

ORISE: Integrated Safety Management (ISM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Safety Management (ISM) Integrated Safety Management (ISM) Oak Ridge Associated Universities (ORAU) is committed to performing work safely as it operates the Oak Ridge Institute for Science and Education (ORISE). ORAU supports the U.S. Department of Energy (DOE) policy of using management systems to integrate safety into work practices at all levels. ORAU defines "safety" as encompassing environment, safety and health, and also includes waste minimization and pollution prevention. All ORAU programs and departments actively pursue continuous improvement, and the addition of Integrated Safety Management (ISM) concepts further strengthens safety as a standard in ORISE's culture. ORAU has accepted the ISM concept by contract under DOE Acquisition Regulations Clause 970.5204-2 and DOE Policy 450.4, Safety Management System Policy.

142

Data Integration Using Web Services  

Science Conference Proceedings (OSTI)

In this paper we examine the opportunities for data integration in the context of the emerging Web Services systems development paradigm. The paper introduces the programming standards associated with Web Services and provides an example of how Web Services ...

Mark Hansen; Stuart E. Madnick; Michael Siegel

2003-01-01T23:59:59.000Z

143

OMC-INTEGRAL Memory Management  

Science Conference Proceedings (OSTI)

The management of the memory restrictions imposed by the processor (1750A) was one of the major difficulties found in designing the Software (SW) controlling the Optical Monitoring Camera (OMC) payload of the International Gamma Ray Laboratory (INTEGRAL) ...

Jose Manuel Pérez Lobato; Eva Martín Lobo

2002-06-01T23:59:59.000Z

144

Integral Effects of Deep Convection  

Science Conference Proceedings (OSTI)

The large-scale, integral effect of convective elements (plumes) constituting an open-ocean chimney is investigated both theoretically and with a plume-resolving numerical model. The authors consider an initially homogeneous “patch” of ocean of ...

Uwe Send; John Marshall

1995-05-01T23:59:59.000Z

145

Arnold Schwarzenegger INTEGRATED FORECAST AND  

E-Print Network (OSTI)

Arnold Schwarzenegger Governor INTEGRATED FORECAST AND RESERVOIR MANAGEMENT (INFORM) FOR NORTHERN; the former with primary contributions in the areas of climate and hydrologic forecasting and the latter Service (NWS) California Nevada River Forecast Center (CNRFC), the California Department of Water

146

Challenges in Integrating Renewable Technologies  

E-Print Network (OSTI)

PV, solar thermal, and wave. Breakthroughs are also needed in large-scale energy storage technologies reliability and econ- omy. The challenges of integrating high penetrations of renewable energy technologies

147

Spent fuel integrity during transportation  

SciTech Connect

The conditions of recent shipments of light water reactor spent fuel were surveyed. The radioactivity level of cask coolant was examined in an attempt to find the effects of transportation on LWR fuel assemblies. Discussion included potential cladding integrity loss mechanisms, canning requirements, changes of radioactivity levels, and comparison of transportation in wet or dry media. Although integrity loss or degradation has not been identified, radioactivity levels usually increase during transportation, especially for leaking assemblies.

Funk, C.W.; Jacobson, L.D.

1980-01-01T23:59:59.000Z

148

Model Transformations And Tool Integration  

E-Print Network (OSTI)

Model transformations are increasingly recognised as being of significant importance to many areas of software development and integration. Recent attention on model transformations has particularly focused on the OMG's Queries / Views / Transformations (QVT) Request for Proposals (RFP). In this paper I motivate the need for dedicated approaches to model transformations, particularly for the data involved in tool integration, outline the challenges involved, and then present a number of technologies and techniques which allow the construction of flexible, powerful and practical model transformations.

Laurence Tratt

2004-01-01T23:59:59.000Z

149

Foundations of uncertain-data integration  

Science Conference Proceedings (OSTI)

There has been considerable past work studying data integration and uncertain data in isolation. We develop the foundations for local-as-view (LAV) data integration when the sources being integrated are uncertain. We motivate two distinct settings ...

Parag Agrawal; Anish Das Sarma; Jeffrey Ullman; Jennifer Widom

2010-09-01T23:59:59.000Z

150

Integrated Safety Management- Building Mission Success  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM Integrated Safety Management- Building Mission Success Approximately 500 federal and contractor employees will arrive in Idaho Falls to participate in the 2008 Integrated...

151

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Systems Integration Home > Energy Systems Integration > Posts by term Content Group Activity By term Q & A Feeds developer (1) ESI (1) Literature Review (5) Maintenance (1)...

152

Major Risk Factors Integrated Facility Disposition Project -...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Oak Ridge Summary - Major Risk Factors Integrated Facility Disposition Project (IFDP) Oak Ridge, TN More Documents & Publications Major Risk Factors to the Integrated...

153

Building Technologies Office: Integrated Predictive Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Predictive Integrated Predictive Demand Response Controller Research Project to someone by E-mail Share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Facebook Tweet about Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Twitter Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Google Bookmark Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Delicious Rank Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on Digg Find More places to share Building Technologies Office: Integrated Predictive Demand Response Controller Research Project on AddThis.com...

154

Building Technologies Office: Integrated Building Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Building Integrated Building Management System Research Project to someone by E-mail Share Building Technologies Office: Integrated Building Management System Research Project on Facebook Tweet about Building Technologies Office: Integrated Building Management System Research Project on Twitter Bookmark Building Technologies Office: Integrated Building Management System Research Project on Google Bookmark Building Technologies Office: Integrated Building Management System Research Project on Delicious Rank Building Technologies Office: Integrated Building Management System Research Project on Digg Find More places to share Building Technologies Office: Integrated Building Management System Research Project on AddThis.com... About Take Action to Save Energy Partner with DOE

155

Power Integrations Inc | Open Energy Information  

Open Energy Info (EERE)

Name Power Integrations Inc Place San Jose, California Zip 95138 Product Supplier of high-voltage analog integrated circuits used in power conversion. References Power...

156

India's Integrated Energy Policy | Open Energy Information  

Open Energy Info (EERE)

India's Integrated Energy Policy Jump to: navigation, search Name India's Integrated Energy Policy AgencyCompany Organization Government of India Sector Energy Focus Area...

157

Audit of Departmental Integrated Standardized Core Accounting...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Audit of Departmental Integrated Standardized Core Accounting System (DISCAS) Operations at Selected Field Sites, AP-FS-97-02 Audit of Departmental Integrated Standardized Core...

158

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE DEPARTMENT OF ENERGY, DOEIG-0466 IMPLEMENTATION OF INTEGRATED BUSINESS INFORMATION SYSTEMS WITHIN THE...

159

Integrated Computational Design, Development, Qualification and ...  

Science Conference Proceedings (OSTI)

Symposium, 1st World Congress on Integrated Computational Materials ... The benefits of applying an integrated approach to computational material design and  ...

160

NIST Modeled integrated scattering tool (MIST)  

Science Conference Proceedings (OSTI)

... been developed to provide users with a general application to model an integrated scattering system. The program performs an integration of the ...

2012-08-07T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Eon Masdar Integrated Carbon | Open Energy Information  

Open Energy Info (EERE)

Sign Up Search Page Edit with form History Facebook icon Twitter icon Eon Masdar Integrated Carbon Jump to: navigation, search Name Eon Masdar Integrated Carbon Place Germany...

162

Integrated Security System | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Security System Integrated Security System A security platform providing multi-layer intrusion detection and security management for a networked energy control systems...

163

Distributed Energy Systems Integration Group (Fact Sheet)  

Science Conference Proceedings (OSTI)

Factsheet developed to describe the activites of the Distributed Energy Systems Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

Not Available

2009-10-01T23:59:59.000Z

164

NREL: Process Development and Integration Laboratory - Video...  

NLE Websites -- All DOE Office Websites (Extended Search)

Video on How Process Development and Integration Works In this video, we provide a narrated animation that explains the process development and integration approach being used by...

165

NREL: Process Development and Integration Laboratory - Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities The process development and integration approach used within the Process Development and Integration Laboratory (PDIL) provides numerous capabilities for scientific...

166

NREL: Process Development and Integration Laboratory - Working...  

NLE Websites -- All DOE Office Websites (Extended Search)

Working with Us The Process Development and Integration Laboratory (PDIL), which accommodates the process development and integration approach, facilitates collaborative projects...

167

NREL: Process Development and Integration Laboratory - About...  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Process Development and Integration Laboratory The Process Development and Integration Laboratory (PDIL) is located within the Science and Technology Facility at the...

168

The Integrated Environmental Control Model (IECM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Innovations for Existing Plants The Integrated Environmental Control Model (IECM) The Integrated Environmental Control Model (IECM) was developed for the National Energy Technology...

169

Integrating transportation conservation with regional conservation planning  

E-Print Network (OSTI)

and Wildlife Biologist/Transportation Liaison, U.S. Fish andChapter Integrating Transportation and Resource Conservationon the integration of transportation conservation with the

DiGregoria, John; Luciani, Emilie; Wynn, Susan

2005-01-01T23:59:59.000Z

170

NREL: Electricity Integration Research - Electricity, Resources...  

NLE Websites -- All DOE Office Websites (Extended Search)

Electricity, Resources, and Building Systems Integration Center NREL's Electricity, Resources, and Building Systems Integration Center brings together diverse groups of experts...

171

Light Water Reactor Sustainability Program: Integrated Program...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Light Water Reactor Sustainability Program: Integrated Program Plan Light Water Reactor Sustainability Program: Integrated Program Plan Nuclear power has safely, reliably, and...

172

BTRIC | Building Tech Research Integration Center | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

& Integration Center SHARE The Buildings Technology Research & Integration Center (BTRIC) User Facility at Oak Ridge National Laboratory is the premier U.S. research facility...

173

EIS-0431: Hydrogen Energy California's Integrated Gasification...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

31: Hydrogen Energy California's Integrated Gasification Combined Cycle and Carbon Capture and Sequestration Project, California EIS-0431: Hydrogen Energy California's Integrated...

174

NREL: Distributed Grid Integration - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

interests include grid integration of renewables systems (wind and PV), energy storage system integration, distributed energy resources, distribution automation, power systems,...

175

SunShot Initiative: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration to someone by Systems Integration to someone by E-mail Share SunShot Initiative: Systems Integration on Facebook Tweet about SunShot Initiative: Systems Integration on Twitter Bookmark SunShot Initiative: Systems Integration on Google Bookmark SunShot Initiative: Systems Integration on Delicious Rank SunShot Initiative: Systems Integration on Digg Find More places to share SunShot Initiative: Systems Integration on AddThis.com... Concentrating Solar Power Photovoltaics Systems Integration Research, Development, & Demonstration Competitive Awards Balance of Systems Systems Integration High Penetration Solar Portal The High Penetration Solar Portal has timely information related to high penetration solar scenarios and integrating solar into the grid. The site allows utilities, grant awardees, regulators, researchers, and other solar

176

Separations and safeguards model integration.  

Science Conference Proceedings (OSTI)

Research and development of advanced reprocessing plant designs can greatly benefit from the development of a reprocessing plant model capable of transient solvent extraction chemistry. This type of model can be used to optimize the operations of a plant as well as the designs for safeguards, security, and safety. Previous work has integrated a transient solvent extraction simulation module, based on the Solvent Extraction Process Having Interaction Solutes (SEPHIS) code developed at Oak Ridge National Laboratory, with the Separations and Safeguards Performance Model (SSPM) developed at Sandia National Laboratory, as a first step toward creating a more versatile design and evaluation tool. The goal of this work was to strengthen the integration by linking more variables between the two codes. The results from this integrated model show expected operational performance through plant transients. Additionally, ORIGEN source term files were integrated into the SSPM to provide concentrations, radioactivity, neutron emission rate, and thermal power data for various spent fuels. This data was used to generate measurement blocks that can determine the radioactivity, neutron emission rate, or thermal power of any stream or vessel in the plant model. This work examined how the code could be expanded to integrate other separation steps and benchmark the results to other data. Recommendations for future work will be presented.

Cipiti, Benjamin B.; Zinaman, Owen

2010-09-01T23:59:59.000Z

177

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

The Magnetohydrodynamics (MHD) Integrated Topping Cycle (ITC) Project represents the culmination of the proof-of-concept (POC) development stage in the US Department of Energy (DOE) program to advance MHD technology to early commercial development stage utility power applications. The project is a joint effort, combining the skills of three topping cycle component developers: TRW, Avco/TDS, and Westinghouse. TRW, the prime contractor and system integrator, is responsible for the 50 thermal megawatt (50 MW{sub t}) slagging coal combustion subsystem. Avco/TDS is responsible for the MHD channel subsystem (nozzle, channel, diffuser, and power conditioning circuits), and Westinghouse is responsible for the current consolidation subsystem. The ITC Project will advance the state-of-the-art in MHD power systems with the design, construction, and integrated testing of 50 MW{sub t} power train components which are prototypical of the equipment that will be used in an early commercial scale MHD utility retrofit. Long duration testing of the integrated power train at the Component Development and Integration Facility (CDIF) in Butte, Montana will be performed, so that by the early 1990's, an engineering data base on the reliability, availability, maintainability and performance of the system will be available to allow scaleup of the prototypical designs to the next development level. This Sixteenth Quarterly Technical Progress Report covers the period May 1, 1991 to July 31, 1991.

Not Available

1992-03-01T23:59:59.000Z

178

Process Development and Integration Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

* 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov * 1617 Cole Boulevard, Golden, Colorado 80401-3305 * 303-275-3000 * www.nrel.gov NREL is a national laboratory of the U. S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. NREL/FS-5200-48351 * June 2011 Process Development and Integration Laboratory Scope. The Process Development and Integration Laboratory (PDIL) within the National Renewable Energy Laboratory (NREL) is operated by the National Center for Photovoltaics (NCPV). The PDIL is a unique collaborative facility where industry and universities can work closely with NREL scientists on integrated equipment to answer pressing questions related to photovoltaics (PV) development. We work with a wide range of PV materials-from crystalline silicon to thin films (amorphous, nano- and

179

NREL: Electricity Integration Research - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Webmaster Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Electricity Integration Research Home Distributed Grid Integration Transmission Grid Integration Facilities Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

180

Integrated Building Management System (IBMS)  

SciTech Connect

This project provides a combination of software and services that more easily and cost-effectively help to achieve optimized building performance and energy efficiency. Featuring an open-platform, cloud- hosted application suite and an intuitive user experience, this solution simplifies a traditionally very complex process by collecting data from disparate building systems and creating a single, integrated view of building and system performance. The Fault Detection and Diagnostics algorithms developed within the IBMS have been designed and tested as an integrated component of the control algorithms running the equipment being monitored. The algorithms identify the normal control behaviors of the equipment without interfering with the equipment control sequences. The algorithms also work without interfering with any cooperative control sequences operating between different pieces of equipment or building systems. In this manner the FDD algorithms create an integrated building management system.

Anita Lewis

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Advancing Energy Systems through Integration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advancing Energy Systems Advancing Energy Systems through Integration Presented in partnership with the United States Department of Energy November 20, 2012 Webinar Community Renewable Energy Success Stories: District Heating with Renewable Energy Saint Paul's Community Energy System * Underground network of pipes aggregate heating and cooling needs * Aggregated thermal loads allows application of technologies and fuels not feasible for individual buildings * Increases fuel flexibility, rate stability, and reliability Community Scale Heating and Cooling 4 ever-greenenergy.com Ever-Green Energy Integrated Energy System flexible & renewable fuel sources reliable and effective production & storage hot & chilled water loops maximize energy conservation & reliability

182

National Bioenergy Center Biochemical Platform Integration Project  

DOE Green Energy (OSTI)

April through June 2008 update on activities of the National Bioenergy Center's Biochemical Platform Integration Project.

Not Available

2008-07-01T23:59:59.000Z

183

Patch Burning: Integrating Fire and Grazing  

E-Print Network (OSTI)

Patch Burning: Integrating Fire and Grazing to Promote Heterogeneity Patch Burning: Integrating Oklahoma Cooperative Extension Service Oklahoma State University June 2013 #12;#12;Patch Burning: Integrating Fire and Grazing to Promote Heterogeneity Patch Burning: Integrating Fire and Grazing to Promote

Balasundaram, Balabhaskar "Baski"

184

Patch Burning: Integrating Fire and Grazing  

E-Print Network (OSTI)

Patch Burning: Integrating Fire and Grazing to Promote Heterogeneity Patch Burning: Integrating Oklahoma Cooperative Extension Service Oklahoma State University September 2007 #12;#12;Patch Burning: Integrating Fire and Grazing to Promote Heterogeneity Patch Burning: Integrating Fire and Grazing to Promote

Debinski, Diane M.

185

Energy Storage Management for VG Integration (Presentation)  

SciTech Connect

This presentation describes how you economically manage integration costs of storage and variable generation.

Kirby, B.

2011-10-01T23:59:59.000Z

186

Proceedings of 2001 ASME: International Mechanical Engineering Congress and Exposition  

E-Print Network (OSTI)

) to the CSP (Chip Scale package), have mirrored the advances in shrinking integrated circuit (IC) feature-in and functional test. However, the WLP uses only three main steps: fabrication, burn-in and test on wafer level, dice. This approach greatly reduces the time and labor for test and fabrication per chip. 3) Better

187

Building Technologies Office: Buildings to Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings to Grid Buildings to Grid Integration to someone by E-mail Share Building Technologies Office: Buildings to Grid Integration on Facebook Tweet about Building Technologies Office: Buildings to Grid Integration on Twitter Bookmark Building Technologies Office: Buildings to Grid Integration on Google Bookmark Building Technologies Office: Buildings to Grid Integration on Delicious Rank Building Technologies Office: Buildings to Grid Integration on Digg Find More places to share Building Technologies Office: Buildings to Grid Integration on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research Lighting Research

188

New and Underutilized Technology: Integrated Daylighting Systems |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Daylighting Systems Integrated Daylighting Systems New and Underutilized Technology: Integrated Daylighting Systems October 4, 2013 - 4:56pm Addthis The following information outlines key deployment considerations for integrated daylighting systems within the Federal sector. Benefits Integrated daylighting systems can be combined with electronic dimmable fluorescent ballasts, photo sensors, and occupancy sensors where appropriate. Network components, workstation controls, and building management options can also be integrated to provide significant savings on applied systems. Application Integrated daylighting systems are applicable in perimeter and interior spaces with daylight exposure via windows and skylights. Key Factors for Deployment Acceptable levels of daylight are required and must be factored into

189

Integrals for IBS and beam cooling  

SciTech Connect

Simulation of beam cooling usually requires performing certain integral transformations every time step or so, which is a significant burden on the CPU. Examples are the dispersion integrals (Hilbert transforms) in the stochastic cooling, wake fields and IBS integrals. An original method is suggested for fast and sufficiently accurate computation of the integrals. This method is applied for the dispersion integral. Some methodical aspects of the IBS analysis are discussed.

Burov, A.; /Fermilab

2005-01-01T23:59:59.000Z

190

2010INTEGRATED ENERGY POLICY REPORT  

E-Print Network (OSTI)

by renewable power plant developers in the state. With its long history of clean energy policies, California/Global_warming/G-20%20Report.pdf. Building on the Clean Energy FoundationCalifornia's decades-long history of environ2010INTEGRATED ENERGY POLICY REPORT UPDATE CALIFORNIA ENERGY COMMISSION EDMUND G. BROWN JR

191

Integrated decontamination process for metals  

DOE Patents (OSTI)

An integrated process for decontamination of metals, particularly metals that are used in the nuclear energy industry contaminated with radioactive material. The process combines the processes of electrorefining and melt refining to purify metals that can be decontaminated using either electrorefining or melt refining processes.

Snyder, Thomas S. (Oakmont, PA); Whitlow, Graham A. (Murrysville, PA)

1991-01-01T23:59:59.000Z

192

Publicly Verifiable Remote Data Integrity  

Science Conference Proceedings (OSTI)

More and more customers are outsourcing data storage to remote archive service providers that are responsible for properly preserving the data. As such, it has become crucial for an archive service to be capable of providing evidence to demonstrate the ... Keywords: data outsourcing, integrity, pairing, public verifiability

Ke Zeng

2008-10-01T23:59:59.000Z

193

Structurally integrated steel solar collector  

DOE Patents (OSTI)

Herein is disclosed a flat plate solar heat collector unit. The solar collector is integrated as a structural unit so that the collector also functions as the building roof. The functions of efficient heat collection, liquid coolant flow passages, roof structural support and building insulation are combined into one unit.

Moore, Stanley W. (Los Alamos, NM)

1977-03-08T23:59:59.000Z

194

Structurally integrated steel solar collector  

DOE Patents (OSTI)

Herein is disclosed a flate plate solar heat collector unit. The solar collector is integrated as a structural unit so that the collector also functions as the building roof. The functions of efficient heat collection, liquid coolant flow passages, roof structural support, and building insulation are combined into one unit.

Moore, S.W.

1975-06-03T23:59:59.000Z

195

Rogers dilogarithm in integrable systems  

E-Print Network (OSTI)

We dicuss some curious aspects of the Rogers dilogarithm and the functional relations in integrable systems in two dimensions. This is for the proceedings of the XX1 Differential Geometry Methods in Theoretical Physics, Tianjin, China, 5-9 June 1992.

Kuniba, A

1992-01-01T23:59:59.000Z

196

Conceptual Modeling for Data Integration  

Science Conference Proceedings (OSTI)

The goal of data integration is to provide a uniform access to a set of heterogeneous data sources, freeing the user from the knowledge about where the data are, how they are stored, and how they can be accessed. One of the outcomes of the research work ...

Diego Calvanese; Giuseppe Giacomo; Domenico Lembo; Maurizio Lenzerini; Riccardo Rosati

2009-07-01T23:59:59.000Z

197

NEMS integrating module documentation report  

Science Conference Proceedings (OSTI)

The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

Not Available

1993-12-14T23:59:59.000Z

198

Transdisciplinary Fluid Integration Research Center  

E-Print Network (OSTI)

Environment Reality-Coupled Computation Energy Dynamics Integrated Visual Informatics Super-Real-Time Medical of Fluid Science, Tohoku University, in April 2003. The next generation transdisciplinary research Research focus is to advance utilization of Computer Fluid Dynamics (CFD) for solving engineering problems

Obayashi, Shigeru

199

Airframe Structural Integrity Programs (ASIP)  

Science Conference Proceedings (OSTI)

Table 2   USAF Aircraft Structural Integrity Program tasks...analysis Vibration analysis Flutter analysis Nuclear weapons effects analysis Non-nuclear weapons effects analysis Design development tests Task III Full-scale testing Static tests Durability tests Damage tolerance tests Flight and ground operations tests Sonic tests Flight vibration tests Flutter...

200

Does integration increase life satisfaction?  

E-Print Network (OSTI)

generation immigrants, integration JEL classification: F22, J15, O15 1. Introduction Identity is generally interpreted as a self-definition, a ‘narrative’ that people tell themselves and others, as the answer that they give to the question ‘who am I...

Koczan, Zs.

2013-04-19T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Programming by integration in robotics  

Science Conference Proceedings (OSTI)

This document presents the first operating version of CoolBOT, a component oriented software framework for programming robotic systems. CoolBOT has been designed having in mind the idea of programming by integrating software components, in order to reduce ...

José L. Fernández-Pérez; Antonio C. Domínguez-Brito; Daniel Hernández-Sosa; Jorge Cabrera-Gámez

2005-02-01T23:59:59.000Z

202

SunShot Initiative: Systems Integration Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

Information Resources Information Resources Printable Version Share this resource Send a link to SunShot Initiative: Systems Integration Newsletter to someone by E-mail Share SunShot Initiative: Systems Integration Newsletter on Facebook Tweet about SunShot Initiative: Systems Integration Newsletter on Twitter Bookmark SunShot Initiative: Systems Integration Newsletter on Google Bookmark SunShot Initiative: Systems Integration Newsletter on Delicious Rank SunShot Initiative: Systems Integration Newsletter on Digg Find More places to share SunShot Initiative: Systems Integration Newsletter on AddThis.com... Publications Newsletter Resource Center Multimedia Meetings & Workshops Solar Innovation Timeline Solar Career Map Glossary Systems Integration Newsletter The SunShot Systems Integration News provides quarterly e-mail updates

203

Property:Component Integration | Open Energy Information  

Open Energy Info (EERE)

Component Integration Component Integration Jump to: navigation, search This is a property of type String. The allowed values for this property are: Customer Assembled Factory Integrated Pages using the property "Component Integration" Showing 22 pages using this property. D Distributed Generation Study/10 West 66th Street Corp + Customer Assembled + Distributed Generation Study/615 kW Waukesha Packaged System + Factory Integrated + Distributed Generation Study/Aisin Seiki G60 at Hooligans Bar and Grille + Customer Assembled + Distributed Generation Study/Arrow Linen + Customer Assembled + Distributed Generation Study/Dakota Station (Minnegasco) + Customer Assembled + Distributed Generation Study/Elgin Community College + Customer Assembled + Distributed Generation Study/Emerling Farm + Factory Integrated +

204

Symplectic Integrator Mercury: Bug Report  

E-Print Network (OSTI)

We report on a problem found in MERCURY, a hybrid symplectic integrator used for dynamical problems in Astronomy. The variable that keeps track of bodies' statuses is uninitialised, which can result in bodies disappearing from simulations in a non-physical manner. Some FORTRAN compilers implicitly initialise variables, preventing simulations from having this problem. With other compilers, simulations with a suitably large maximum number of bodies parameter value are also unaffected. Otherwise, the problem manifests at the first event after the integrator is started, whether from scratch or continuing a previously stopped simulation. Although the problem does not manifest in some conditions, explicitly initialising the variable solves the problem in a permanent and unconditional manner.

K. de Souza Torres; D. R. Anderson

2008-08-04T23:59:59.000Z

205

DOE Transmission System Integration Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Heyeck, AEP, Sr. Vice President, Transmission Heyeck, AEP, Sr. Vice President, Transmission and Chair, EPRI Power Delivery & Utilization Sector Council November 01-02, 2012 DoubleTree Hotel, Crystal City Washington D.C. DOE Transmission System Integration Workshop 2 © 2012 Electric Power Research Institute, Inc. All rights reserved. Near-Zero Emissions Long-Term Operations Renewable Integration Water Management Electric Vehicles Demand Response & Efficiency Renewable Energy Energy Storage Sensors & Control Cyber Security Supply = Demand The Power System Supply to Demand Requires a full portfolio of innovative technologies. Tomorrow's Power System One size does not fit all 3 © 2012 Electric Power Research Institute, Inc. All rights reserved. Grid Transformation to Ensure Reliability, Efficiency, Resiliency and Security

206

Integrated Photovoltaics | Open Energy Information  

Open Energy Info (EERE)

Name Integrated Photovoltaics Name Integrated Photovoltaics Place Sunnyvale, California Product California-based stealth mode PV startup. Coordinates 32.780338°, -96.547405° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.780338,"lon":-96.547405,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

207

Integrated fuel processor development challenges.  

DOE Green Energy (OSTI)

In the absence of a hydrogen-refueling infrastructure, the success of the fuel cell system in the market will depend on fuel processors to enable the use of available fuels, such as gasoline, natural gas, etc. The fuel processor includes several catalytic reactors, scrubbers to remove chemical species that can poison downstream catalysts or the fuel cell electrocatalyst, and heat exchangers. Most fuel cell power applications seek compact, lightweight hardware with rapid-start and load- following capabilities. Although packaging can partially address the size and volume, balancing the performance parameters while maintaining the fuel conversion (to hydrogen) efficiency requires careful integration of the unit operations and processes. Argonne National Laboratory has developed integrated fuel processors that are compact and light, and that operate efficiently. This paper discusses some of the difficulties encountered in the development process, focusing on the factors/components that constrain performance, and areas that need further research and development.

Ahmed, S.; Pereira, Lee, S. H. D.; Kaun, T.; Krumpelt, M.

2002-01-09T23:59:59.000Z

208

Projected integrated farm in Nepal  

SciTech Connect

A proposed integrated crop-livestock agro-processing complex to be based at Janakpur, Nepal is described. This project was proposed by the Agricultural Development Bank and is a small effort towards creating a self-sufficient rural community similar to one reported in China. The plan of the farm aims to achieve the integration of several agricultural, aquacultural, solar energy and biogas energy components with complete recycling of waste. These include biogas plants with associated slurry and storage tanks for operating a 3-kW generator, a 3.7-kW pump, providing domestic cooking, as well as energy to operate a fruit-processing plant. Energy for water heating, crop drying and refrigeration will be supplied by solar energy. Fish, livestock, fruits and vegetables will be produced by the farm.

Dhital, K.

1980-01-01T23:59:59.000Z

209

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

This seventeenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period August 1, 1991 to October 31, 1991. Manufacturing of the prototypical combustor pressure shell has been completed including leak, proof, and assembly fit checking. Manufacturing of forty-five cooling panels was also completed including leak, proof, and flow testing. All precombustor internal components (combustion can baffle and swirl box) were received and checked, and integration of the components was initiated. A decision was made regarding the primary and backup designs for the 1A4 channel. The assembly of the channel related prototypical hardware continued. The cathode wall electrical wiring is now complete. The mechanical design of the diffuser has been completed.

Not Available

1992-07-01T23:59:59.000Z

210

IEC 61850 Technical Integration Evaluation  

Science Conference Proceedings (OSTI)

Designs and implementations of standards can reveal portions of formal standards that need to be further defined and/or issues that emerge in the integration or harmonization of two standards. This report captures the experience of using IEC 61850 and other related standards such as IEC 61970/61968 as part of an implementation in a Tool Kit. It also describes the implementation as well as the issues that have emerged from the experience of a tool developer.

2008-12-22T23:59:59.000Z

211

Steam Generator Integrity Assessment Guidelines  

Science Conference Proceedings (OSTI)

This report provides guidance for evaluating the condition of steam generator (SG) tubes based on nondestructive examination (NDE) or in situ pressure testing. This integrity assessment is normally performed during a reactor refueling outage. Nuclear power plant licensees who follow this document's guidelines will have satisfied their requirements for condition monitoring and operational assessment as defined in the Nuclear Energy Institute (NEI) initiative, Steam Generator Program Guidelines, NEI 97-06.

2006-07-25T23:59:59.000Z

212

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

The overall objective of the project is to design and construct prototypical hardware for an integrated MHD topping cycle, and conduct long duration proof-of-concept tests of integrated system at the US DOE Component Development and Integration Facility in Butte, Montana. The results of the long duration tests will augment the existing engineering design data base on MHD power train reliability, availability, maintainability, and performance, and will serve as a basis for scaling up the topping cycle design to the next level of development, an early commercial scale power plant retrofit. The components of the MHD power train to be designed, fabricated, and tested include: A slagging coal combustor with a rated capacity of 50 MW thermal input, capable of operation with an Eastern (Illinois {number sign}6) or Western (Montana Rosebud) coal, a segmented supersonic nozzle, a supersonic MHD channel capable of generating at least 1.5 MW of electrical power, a segmented supersonic diffuser section to interface the channel with existing facility quench and exhaust systems, a complete set of current control circuits for local diagonal current control along the channel, and a set of current consolidation circuits to interface the channel with the existing facility inverter.

Not Available

1992-01-01T23:59:59.000Z

213

Integrated nonthermal treatment system study  

SciTech Connect

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs.

Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J. [Morrison Knudsen Corp. (United States); Quapp, W.J. [Nuclear Metals (United States); Bechtold, T.; Brown, B.; Schwinkendorf, W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Swartz, G. [Swartz and Associates (United States)

1997-01-01T23:59:59.000Z

214

Transmission and Grid Integration: Electricity, Resources, & Building Systems Integration (Fact Sheet)  

SciTech Connect

Factsheet developed to describe the activites of the Transmission and Grid Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

Not Available

2009-09-01T23:59:59.000Z

215

Fuel Cell Technologies Office: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration The breadth and complexity of the overall Hydrogen and Fuel Cells Program RD&D effort, as well as the interaction of program elements, requires an integrated...

216

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System Integration(Smith 2001) more Group members (8)...

217

Integrated Coal Gasification Power Plant Credit (Kansas)  

Energy.gov (U.S. Department of Energy (DOE))

Integrated Coal Gasification Power Plant Credit states that an income taxpayer that makes a qualified investment in a new integrated coal gasification power plant or in the expansion of an existing...

218

Wind Power Integration: Exploring Impacts and Alternatives  

E-Print Network (OSTI)

Wind Power Integration: Exploring Impacts and Alternatives Assist. Prof. C sustainable sources of energy. The idea of harnessing wind energy has been there have been no less than fifteen in-depth wind integration studies

Walter, M.Todd

219

Better HMC integrators for dynamical simulations  

SciTech Connect

We show how to improve the molecular dynamics step of Hybrid Monte Carlo, both by tuning the integrator using Poisson brackets measurements and by the use of force gradient integrators. We present results for moderate lattice sizes.

M.A. Clark, Balint Joo, A.D. Kennedy, P.J. Silva

2010-06-01T23:59:59.000Z

220

The Challenge of Testing RFID Integrated Circuits  

Science Conference Proceedings (OSTI)

RFID integrated circuits often involve many of themost leading edge production technologies availabletoday. The complexities involved with integrating thesecomplexities into the backend and test environment areexceptionally challenging. To date, this ...

David Murfett

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Integrated Computational Materials Engineering: The Customer's ...  

Science Conference Proceedings (OSTI)

Conference Tools for Materials Science & Technology 2012 ... Scope, Realization of the full benefit of next generation design requires integration of ...

222

Integrated Inverter Control for Multiple Electric Machines  

engine volume to house them all. To improve options for motor design, ORNL researchers invented an integrated

223

HANDBOOK OF THE CELLULAR & INTEGRATIVE PHYSIOLOGY  

E-Print Network (OSTI)

HANDBOOK OF THE CELLULAR & INTEGRATIVE PHYSIOLOGY GRADUATE Interdisciplinary Graduate Programs in the Biomedical Sciences Handbook), the Cellular

Mohaghegh, Shahab

224

Advanced Integrated Data Management for Materials ...  

Science Conference Proceedings (OSTI)

... New materials are essential for future energy independence, environmental sustainability ... Integrated data management is critical for MGI success. ...

2013-07-01T23:59:59.000Z

225

Advances in Integrated Computational Materials Design  

Science Conference Proceedings (OSTI)

Parametric materials design integrating materials science, applied mechanics and quantum physics within a systems engineering framework has brought a first  ...

226

Numerical Differentiation and Integration - CECM - Simon Fraser ...  

E-Print Network (OSTI)

... ' &. $. %. Numerical Differentiation and Integration. Simon Fraser University ? Surrey Campus. MACM 316 ? Spring 2005. Instructor: Ha Le. 1 ...

227

The Virtual Project Data Integration Testbed  

Science Conference Proceedings (OSTI)

... computer integrated construction, operations and maintenance) and supporting databases and documentation for a power plant or water treatment ...

2010-10-05T23:59:59.000Z

228

Advantages of Integrating Precession Scanning Transmission ...  

Science Conference Proceedings (OSTI)

Presentation Title, Advantages of Integrating Precession Scanning Transmission Electron Microscopy in the Characterization of Metallic Materials. Author(s) ...

229

Integrating Renewable Energy Systems in Buildings (Presentation)  

SciTech Connect

This presentation on integrating renewable energy systems into building was presented at the August, 2011 ASHRAE Region IX CRC meetings.

Hayter, S. J.

2011-08-01T23:59:59.000Z

230

Integrating Security RMF with Requirements Management – J ...  

Science Conference Proceedings (OSTI)

Integrating Security RMF with Requirements Management – J Peeler ... Security controls at “Low” Risk are risk accepted & may not need mitigation. ...

2013-12-13T23:59:59.000Z

231

Generalized integrability conditions and target space geometry  

E-Print Network (OSTI)

In some higher dimensional nonlinear field theories integrable subsectors with infinitely many conservation laws have been identified by imposing additional integrability conditions. Originally, the complex eikonal equation was chosen as integrability condition, but recently further generalizations have been proposed. Here we show how these new integrability conditions may be derived from the geometry of the target space and, more precisely, from the Noether currents related to a certain class of target space transformations.

C. Adam; J. Sanchez-Guillen

2005-08-01T23:59:59.000Z

232

Web based integrated models for participatory planning  

Science Conference Proceedings (OSTI)

The present paper focuses on the development of an integrated assessment model that embeds the web dimension and aims at increasing awareness in society, especially on environmental issues. The model incorporates features that make it capable of promoting ... Keywords: greenhouse gas emissions, increasing awareness, integrated assessment models, web based participatory integrated assessment models

Grammatikogiannis Elias; Maria Giaoutzi

2011-06-01T23:59:59.000Z

233

INTEGRAL CATALYTIC COMBUSTION/FUEL REFORMING  

E-Print Network (OSTI)

INTEGRAL CATALYTIC COMBUSTION/FUEL REFORMING FOR GAS TURBINE Prepared For: California Energy REPORT (FAR) INTEGRAL CATALYTIC COMBUSTION/FUEL REFORMING FOR GAS TURBINE CYCLES EISG AWARDEE University://www.energy.ca.gov/research/index.html. #12;Page 1 Integral Catalytic Combustion/Fuel Reforming for Gas Turbine Cycles EISG Grant # 99

234

A new paradigm for integrated environmental monitoring  

Science Conference Proceedings (OSTI)

The vision of an integrated Earth observation system to help protect and sustain the planet and its inhabitants is significant and timely, and thus has been identified recently by many organizations. Clearly, the societal benefits of global integrated ... Keywords: cloud computing, data integration, environmental monitoring, modeling and simulation, sensors, visualization

Kevin Montgomery; Carsten Mundt

2010-06-01T23:59:59.000Z

235

Tree-structure Based Ontology Integration  

Science Conference Proceedings (OSTI)

This paper defines a framework for ontology integration - Tree-structure Based Ontology Integration (TSBOI). Unlike other methodologies in the area, which mainly concentrate on attribute comparison, this methodology is designed to map objects of an ontology ... Keywords: integration, ontology, tree structure

Jie Xie; Fei Liu; Sheng-Uei Guan

2011-12-01T23:59:59.000Z

236

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

This eighteenth quarterly technical progress report of the MHD Integrated Topping cycle Project presents the accomplishments during the period November 1, 1991 to January 31, 1992. The precombustor is fully assembled. Manufacturing of all slagging stage components has been completed. All cooling panels were welded in place and the panel/shell gap was filled with RTV. Final combustor assembly is in progress. The low pressure cooling subsystem (LPCS) was delivered to the CDIF. Second stage brazing issues were resolved. The construction of the two anode power cabinets was completed.

Not Available

1992-07-01T23:59:59.000Z

237

Distribution Integrity Management Plant (DIMP)  

SciTech Connect

This document is the distribution integrity management plan (Plan) for the Los Alamos National Laboratory (LANL) Natural Gas Distribution System. This Plan meets the requirements of 49 CFR Part 192, Subpart P Distribution Integrity Management Programs (DIMP) for the LANL Natural Gas Distribution System. This Plan was developed by reviewing records and interviewing LANL personnel. The records consist of the design, construction, operation and maintenance for the LANL Natural Gas Distribution System. The records system for the LANL Natural Gas Distribution System is limited, so the majority of information is based on the judgment of LANL employees; the maintenance crew, the Corrosion Specialist and the Utilities and Infrastructure (UI) Civil Team Leader. The records used in this report are: Pipeline and Hazardous Materials Safety Administration (PHMSA) 7100.1-1, Report of Main and Service Line Inspection, Natural Gas Leak Survey, Gas Leak Response Report, Gas Leak and Repair Report, and Pipe-to-Soil Recordings. The specific elements of knowledge of the infrastructure used to evaluate each threat and prioritize risks are listed in Sections 6 and 7, Threat Evaluation and Risk Prioritization respectively. This Plan addresses additional information needed and a method for gaining that data over time through normal activities. The processes used for the initial assessment of Threat Evaluation and Risk Prioritization are the methods found in the Simple, Handy Risk-based Integrity Management Plan (SHRIMP{trademark}) software package developed by the American Pipeline and Gas Agency (APGA) Security and Integrity Foundation (SIF). SHRIMP{trademark} uses an index model developed by the consultants and advisors of the SIF. Threat assessment is performed using questions developed by the Gas Piping Technology Company (GPTC) as modified and added to by the SHRIMP{trademark} advisors. This Plan is required to be reviewed every 5 years to be continually refined and improved. Records for all piping system installed after the effective date of this Plan will be captured and retained in the UI records documentation system. Primary Utility Asbuilts are maintained by Utilities Mapping (UMAP) and additional records are maintained on the N drive. Engineering Change Notices (ECNs) are stored on the N drive under configuration management and kept up by Utilities and Infrastructure Division Office (UI-DO). Records include, at a minimum, the location where new piping and appurtenances are installed and the material of which they are constructed.

Gonzales, Jerome F. [Los Alamos National Laboratory

2012-05-07T23:59:59.000Z

238

Miners turn to integrated technology  

Science Conference Proceedings (OSTI)

To offset turnover and share data in a more timely fashion, mining companies are looking at smarter ways of managing coal extraction. Runge has developed a mine management system called Mining Dynamics which transfers data from Xact, the firms short term planning system, and integrates it with information from SAP using a composite application. The system allows mine personnel to concentrate on their jobs without getting bogged down in data entry. Xact has about 60 licenses worldwide, five of which are in the Power River Basin.

Fiscor, S.

2007-10-15T23:59:59.000Z

239

Lamp bulb with integral reflector  

SciTech Connect

An improved electrodeless discharge lamp bulb includes an integral ceramic reflector as a portion of the bulb envelope. The bulb envelope further includes two pieces, a reflector portion or segment is cast quartz ceramic and a light transmissive portion is a clear fused silica. In one embodiment, the cast quartz ceramic segment includes heat sink fins or stubs providing an increased outside surface area to dissipate internal heat. In another embodiment, the quartz ceramic segment includes an outside surface fused to eliminate gas permeation by polishing.

Levin, Izrail (Silver Spring, MD); Shanks, Bruce (Gaithersburg, MD); Sumner, Thomas L. (Wheaton, MD)

2001-01-01T23:59:59.000Z

240

Transformations of hypergeometric elliptic integrals  

E-Print Network (OSTI)

The paper classifies algebraic transformations of Gauss hypergeometric functions with the local exponent differences $(1/2,1/4,1/4)$, $(1/2,1/3,1/6)$ and $(1/3,1/3,1/3)$. These form a special class of algebraic transformations of Gauss hypergeometric functions, of arbitrary high degree. The Gauss hypergeometric functions can be identified as elliptic integrals on the genus 1 curves $y=x^3-x$ or $y=x^3-1$. Especially interesting are algebraic transformations of the hypergeometric functions into themselves; these transformations come from isogenies of the respective elliptic curves.

Vidunas, Raimundas

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Near Term Hydrogen and Electricity Infrastructure Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Denver, CO Denver, CO September 22, 2004 Abbas Akhil, DER and Energy Storage Sandia National Laboratories, Albuquerque, NM (505) 844-7308 aaakhil@sandia.gov Near-term Hydrogen and Electricity Infrastructure Integration Near-term Hydrogen and Electricity Infrastructure Integration Integration Scenarios and Issues Integration Scenarios and Issues ! How and where can electrolysis systems be integrated in the grid? " Siting/location " Operational issues " Investments " Benefits " Ownership ! Objectives are " Capture "grid" benefits " Seek to reduce emissions Siting and Location Siting and Location ! Electrolysis systems can be sited at " Existing generating stations " Transmission substations " Distribution substations ! Each locations has different

242

Functional Integration on Constrained Function Spaces  

E-Print Network (OSTI)

Analogy with Bayesian inference is used to study constrained physical systems within the context of functional integration. Since functional integrals probe function spaces, both kinematical and dynamical constraints are treated simultaneously and on equal footing. Following the analogy, functional counterparts of conditional and conjugate probability distributions are introduced for integrators and then applied to some well-known examples of constrained functional integrals. The analysis leads to some new functional integration tools and methods. These are utilized to construct a model of the prime counting function as a constrained gamma process.

J. LaChapelle

2012-12-03T23:59:59.000Z

243

PIA - iManage Strategic Integrated Procurement Enterprise System...  

NLE Websites -- All DOE Office Websites (Extended Search)

iManage Strategic Integrated Procurement Enterprise System (STRIPES) PIA - iManage Strategic Integrated Procurement Enterprise System (STRIPES) PIA - iManage Strategic Integrated...

244

PIA - Richland FOIA Folder Within Integrated Data Management...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Richland FOIA Folder Within Integrated Data Management PIA - Richland FOIA Folder Within Integrated Data Management PIA - Richland FOIA Folder Within Integrated Data Management PIA...

245

NREL: Transmission Grid Integration - Western Wind and Solar...  

NLE Websites -- All DOE Office Websites (Extended Search)

Western Wind and Solar Integration Study The Western Wind and Solar Integration Study, one of the largest regional solar and wind integration studies to date, explores the...

246

Vehicle Technologies Office: Thermal Control and System Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermal Control and System Integration The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the...

247

Integration of distributed energy resources. The CERTS Microgrid Concept  

E-Print Network (OSTI)

2001. Integration of Distributed Energy Resources - The C Enew Integration of Distributed Energy Resources - The C E Ron Integration of Distributed Energy Resources The CERTS

2002-01-01T23:59:59.000Z

248

NREL Leads Energy Systems Integration: Issue 4 (Book), Continuum...  

NLE Websites -- All DOE Office Websites (Extended Search)

- A Living Laboratory for Integrated Solutions for a A Renewable Electricity Future Energy Systems Integration Complex Energy World Energy Systems Integration NREL is a national...

249

Lighting Research Group: Facilities: Integrating Sphere  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Sphere Integrating Sphere integrating sphere Integrating Sphere Gonio-photometer | Integrating sphere | Power analyzer | Spectro-radiometer The integrating sphere is used to quickly measure the total light output of a lamp. The lamp being tested is placed in the center of the integrating sphere. At one side of the sphere is a light meter which measures the light output of the lamp. Between the lamp and the light meter there is a baffle to prevent the meter from seeing any direct light from the lamp. The inside of the sphere (including the baffle) is coated with a very white paint that reflects all wavelengths equally. This allows us to get very accurate measurements. The light from the lamp bounces around the sphere until it reaches the light meter. It is important that nothing else is in the sphere besides the lamp and the

250

Review of Variable Generation Integration Charges  

DOE Green Energy (OSTI)

The growth of wind and solar generation in the United States, and the expectation of continued growth of these technologies, dictates that the future power system will be operated in a somewhat different manner because of increased variability and uncertainty. A small number of balancing authorities have attempted to determine an 'integration cost' to account for these changes to their current operating practices. Some balancing authorities directly charge wind and solar generators for integration charges, whereas others add integration charges to projected costs of wind and solar in integrated resource plans or in competitive solicitations for generation. This report reviews the balancing authorities that have calculated variable generation integration charges and broadly compares and contrasts the methodologies they used to determine their specific integration charges. The report also profiles each balancing authority and how they derived wind and solar integration charges.

Porter, K.; Fink, S.; Buckley, M.; Rogers, J.; Hodge, B. M.

2013-03-01T23:59:59.000Z

251

Integrally formed radio frequency quadrupole  

DOE Patents (OSTI)

An improved radio frequency quadrupole (10) is provided having an elongate housing (11) with an elongate central axis (12) and top, bottom and two side walls (13a-d) symmetrically disposed about the axis, and vanes (14a-d) formed integrally with the walls (13a-d), the vanes (14a-d) each having a cross-section at right angles to the central axis (12) which tapers inwardly toward the axis to form electrode tips (15a-d) spaced from each other by predetermined distances. Each of the four walls (13a-d), and the vanes (14a-d) integral therewith, is a separate structural element having a central lengthwise plane (16) passing through the tip of the vane, the walls (13a-d) having flat mounting surfaces (17, 18) at right angles to and parallel to the control plane (16), respectively, which are butted together to position the walls and vane tips relative to each other.

Abbott, Steven R. (Concord, CA)

1989-01-01T23:59:59.000Z

252

The Fireball integrated code package  

Science Conference Proceedings (OSTI)

Many deep-space satellites contain a plutonium heat source. An explosion, during launch, of a rocket carrying such a satellite offers the potential for the release of some of the plutonium. The fireball following such an explosion exposes any released plutonium to a high-temperature chemically-reactive environment. Vaporization, condensation, and agglomeration processes can alter the distribution of plutonium-bearing particles. The Fireball code package simulates the integrated response of the physical and chemical processes occurring in a fireball and the effect these processes have on the plutonium-bearing particle distribution. This integrated treatment of multiple phenomena represents a significant improvement in the state of the art for fireball simulations. Preliminary simulations of launch-second scenarios indicate: (1) most plutonium vaporization occurs within the first second of the fireball; (2) large non-aerosol-sized particles contribute very little to plutonium vapor production; (3) vaporization and both homogeneous and heterogeneous condensation occur simultaneously; (4) homogeneous condensation transports plutonium down to the smallest-particle sizes; (5) heterogeneous condensation precludes homogeneous condensation if sufficient condensation sites are available; and (6) agglomeration produces larger-sized particles but slows rapidly as the fireball grows.

Dobranich, D.; Powers, D.A.; Harper, F.T.

1997-07-01T23:59:59.000Z

253

Temporal Integrators for Fluctuating Hydrodynamics  

E-Print Network (OSTI)

Including the effect of thermal fluctuations in traditional computational fluid dynamics requires developing numerical techniques for solving the stochastic partial differential equations of fluctuating hydrodynamics. These Langevin equations possess a special fluctuation-dissipation structure that needs to be preserved by spatio-temporal discretizations in order for the computed solution to reproduce the correct long-time behavior. In particular, numerical solutions should approximate the Gibbs-Boltzmann equilibrium distribution, and ideally this will hold even for large time step sizes. We describe finite-volume spatial discretizations for the fluctuating Burgers and fluctuating incompressible Navier-Stokes equations that obey a discrete fluctuation-dissipation balance principle just like the continuum equations. We develop implicit-explicit predictor-corrector temporal integrators for the resulting stochastic method-of-lines discretization. These stochastic Runge-Kutta schemes treat diffusion implicitly an...

Delong, S; Vanden-Eijnden, E; Donev, A

2012-01-01T23:59:59.000Z

254

NREL: Energy Systems Integration - Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships Partnerships Photo of a researcher in a laboratory in front of various computer simulations Advanced Energy NREL and AE are teaming up on solar inverter testing. Photo of a hybrid sport utility vehicle in motion; the vehicle is marked with the National Renewable Energy Laboratory logo. Toyota NREL and Toyota are studying grid impacts of electric vehicles. Photo of a glass cube containing power electronics equipment in a laboratory. Wyle NREL and Wyle are building a hybrid power system for the Army. The Energy Systems Integration Facility (ESIF) at the National Renewable Energy Laboratory (NREL) was recently designated a national user facility by the Energy Department, so utilities, industry, and other national laboratories can use the facility to develop their technologies with the

255

Integrated Hydrogen Storage System Model  

NLE Websites -- All DOE Office Websites (Extended Search)

WSRC-TR-2007-00440, REVISION 0 WSRC-TR-2007-00440, REVISION 0 Keywords: Hydrogen Kinetics, Hydrogen Storage Vessel Metal Hydride Retention: Permanent Integrated Hydrogen Storage System Model Bruce J. Hardy November 16, 2007 Washington Savannah River Company Savannah River Site Aiken, SC 29808 Prepared for the U.S. Department of Energy Under Contract Number DEAC09-96-SR18500 DISCLAIMER This report was prepared for the United States Department of Energy under Contract No. DE-AC09-96SR18500 and is an account of work performed under that contract. Neither the United States Department of Energy, nor WSRC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for accuracy, completeness, or usefulness, of any information,

256

NREL: Distributed Grid Integration - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Webmaster Webmaster Please enter your name and email address in the boxes provided, then type your message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version Distributed Grid Integration Home Capabilities Projects Research Staff Working with Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

257

2007 Integrated Safety Management Workshop  

NLE Websites -- All DOE Office Websites (Extended Search)

ISM ISM Workshop 2007 a vision for Integrated Safety Management in the Department of Energy complex ISM Workshop 2007 ® Sample of how the graphic may be used on documents where the "Good to Great" verbiage is not includ "Good to Great" is a registered trademark of Jim Collins and is being used with permission. November 27-30, 2007 Hosted by Brookhaven National Laboratory "Good to Great" is a registered trademark of Jim Collins and is being used with permission. 2 Special Thanks Brookhaven National Laboratory Safety, Emergency and Traffic Information Safety, Health and Security Environment, Safety & Health Hotline: 631-344-8800 Occupational Medicine Clinic: 631-344-3670 Security Badging Office: 631-344-5149 Computer Security: 631-344-5522

258

Transverse-longitudinal integrated resonator  

DOE Patents (OSTI)

A transverse-longitudinal integrated optical resonator (TLIR) is disclosed which includes a waveguide, a first and a second subwavelength resonant grating in the waveguide, and at least one photonic band gap resonant structure (PBG) in the waveguide. The PBG is positioned between the first and second subwavelength resonant gratings. An electro-optic waveguide material may be used to permit tuning the TLIR and to permit the TLIR to perform signal modulation and switching. The TLIR may be positioned on a bulk substrate die with one or more electronic and optical devices and may be communicably connected to the same. A method for fabricating a TLIR including fabricating a broadband reflective grating is disclosed. A method for tuning the TLIR's transmission resonance wavelength is also disclosed.

Hutchinson, Donald P [Knoxville, TN; Simpson, Marcus L [Knoxville, TN; Simpson, John T [Knoxville, TN

2003-03-11T23:59:59.000Z

259

Integrated Energy System Dispatch Optimization  

DOE Green Energy (OSTI)

On-site cogeneration of heat and electricity, thermal and electrical storage, and curtailing/rescheduling demand options are often cost-effective to commercial and industrial sites. This collection of equipment and responsive consumption can be viewed as an integrated energy system(IES). The IES can best meet the sites cost or environmental objectives when controlled in a coordinated manner. However, continuously determining this optimal IES dispatch is beyond the expectations for operators of smaller systems. A new algorithm is proposed in this paper to approximately solve the real-time dispatch optimization problem for a generic IES containing an on-site cogeneration system subject to random outages, limited curtailment opportunities, an intermittent renewable electricity source, and thermal storage. An example demonstrates how this algorithm can be used in simulation to estimate the value of IES components.

Firestone, Ryan; Stadler, Michael; Marnay, Chris

2006-06-16T23:59:59.000Z

260

Integrated control system and method  

DOE Patents (OSTI)

An integrated control system for use with an engine connected to a generator providing electrical power to a switchgear is disclosed. The engine receives gas produced by a gasifier. The control system includes an electronic controller associated with the gasifier, engine, generator, and switchgear. A gas flow sensor monitors a gas flow from the gasifier to the engine through an engine gas control valve and provides a gas flow signal to the electronic controller. A gas oversupply sensor monitors a gas oversupply from the gasifier and provides an oversupply signal indicative of gas not provided to the engine. A power output sensor monitors a power output of the switchgear and provide a power output signal. The electronic controller changes gas production of the gasifier and the power output rating of the switchgear based on the gas flow signal, the oversupply signal, and the power output signal.

Wang, Paul Sai Keat; Baldwin, Darryl; Kim, Myoungjin

2013-10-29T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

High Integrity Can Design Interfaces  

Science Conference Proceedings (OSTI)

The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal long after most commercial SNF has degraded and begun moving into the repository environment.

Shaber, E.L.

1998-08-01T23:59:59.000Z

262

Integrated Training Management | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Training Management Integrated Training Management Integrated Training Management Integrated Training Management Each DOE element must have a training policy and procedure that establishes an integrated cycle of organizational needs analysis, training planning, and resource allocation. Training funding must be included in budget submissions; the training needs must be prioritized, and resources allocated accordingly. Each DOE element must also complete an annual training summary, reporting training objectives, cost and actual training conducted each fiscal year. Annually, the Integrated Training Management (ITM) process is used to assist in gathering information critical for the development of each DOE element's Mission Critical Skills, Other Needs(Non-Mission Critical Skills), Leadership Development Programs, and General Competencies. The ITM

263

NREL: Technology Deployment - Integrated Deployment Model  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Deployment Model Integrated Deployment Model NREL's integrated deployment model provides a framework to focus on the national goal of accelerating market adoption of clean energy technologies through local efforts. With support from the U.S. Department of Energy (DOE), NREL developed and applies the integrated deployment model to select projects including disaster recovery, statewide activities, federal agency support, island activities, and community renewable energy deployment. How the Model Works To address the complex challenges of multi-technology, multi-stakeholder, and multi-fuel deployment, NREL created the integrated deployment model to support each technology area separately but also consider the integration points between the technologies. NREL also identifies the cross-cutting

264

Integrated regional assessment: qualitative and quantitative issues  

Science Conference Proceedings (OSTI)

Qualitative and quantitative issues are particularly significant in integrated regional assessment. This chapter examines the terms “qualitative” and “quantitative” separately and in relation to one another, along with a discussion of the degree of interdependence or overlap between the two. Strategies for integrating the two general approaches often produce uneasy compromises. However, integrated regional assessment provides opportunities for strong collaborations in addressing specific problems in specific places.

Malone, Elizabeth L.

2009-11-19T23:59:59.000Z

265

Spent nuclear fuel project integrated schedule plan  

SciTech Connect

The Spent Nuclear Fuel Integrated Schedule Plan establishes the organizational responsibilities, rules for developing, maintain and status of the SNF integrated schedule, and an implementation plan for the integrated schedule. The mission of the SNFP on the Hanford site is to provide safe, economic, environmentally sound management of Hanford SNF in a manner which stages it to final disposition. This particularly involves K Basin fuel.

Squires, K.G.

1995-03-06T23:59:59.000Z

266

EPRI Integrated Dose Reduction Program Pilot Study  

Science Conference Proceedings (OSTI)

The Integrated Dose Reduction (IDR) project is an integral part of EPRI's support to nuclear plant radiation protection programs. The broad objective of the IDR program is to review existing and recent industry developments and provide utilities with an integrated plan for EPRI's assistance based on a plant's specific needs. This document describes a pilot test of this product at a host site, and identifies areas where EPRI's RP assessments and technical assistance can support key plant programs.

2003-11-21T23:59:59.000Z

267

Geomembrane barriers using integral fiber optics to monitor barrier integrity  

DOE Patents (OSTI)

This invention provides a geomembrane or geotextile with embedded optical sensors that are used to monitor the status of containment site barriers. Fiber optic strands are used to form the sensors that can detect and monitor conditions at the sites such as breaches, slope creep, subsidence, leachate levels, fires, and types of materials present or leaking from the site. The strands are integral to the membrane or textile materials. The geosythetic membrane is deployed at the site in a fashion similar to carpet laying. Edges of the membrane or textile are joined to form a liner and the ends of the membrane or textile become the connection zones for obtaining signals from the sensors. A connection interface with a control system to generate Optical Time Delay Response or other light signals for transmission to the optic fiber strands or sensors and also to receive reflected signals from the sensors is included in the system. Software to interpret the sensor signals can be used in the geosythetic monitoring system.

Staller, George E. (Albuquerque, NM); Wemple, Robert P. (Albuquerque, NM)

1996-01-01T23:59:59.000Z

268

Geomembrane barriers using integral fiber optics to monitor barrier integrity  

DOE Patents (OSTI)

This invention provides a geomembrane or geotextile with embedded optical sensors that are used to monitor the status of containment site barriers. Fiber optic strands are used to form the sensors that can detect and monitor conditions at the sites such as breaches, slope creep, subsidence, leachate levels, fires, and types of materials present or leaking from the site. The strands are integral to the membrane or textile materials. The geosynthetic membrane is deployed at the site in a fashion similar to carpet laying. Edges of the membrane or textile are joined to form a liner and the ends of the membrane or textile become the connection zones for obtaining signals from the sensors. A connection interface with a control system to generate Optical Time Delay Response or other light signals for transmission to the optic fiber strands or sensors and also to receive reflected signals from the sensors is included in the system. Software to interpret the sensor signals can be used in the geosynthetic monitoring system. 6 figs.

Staller, G.E.; Wemple, R.P.

1996-10-22T23:59:59.000Z

269

DOE Hydrogen Analysis Repository: Wind Power Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Summary Full Title: Large-Scale Integration of Wind Power into Different Energy Systems Project ID: 124 Principal Investigator: Henrik Lund Purpose The analysis...

270

Parallel Integrated Thermal Management - Energy Innovation Portal  

Many current cooling systems for hybrid electric vehicles ... Energy Innovation Portal ... either through direct heat transfer or through integration with a heat ...

271

NREL: Energy Systems Integration - Research and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

Research and Development Energy systems integration optimizes the design and performance of electrical, thermal, and fuel systems at different but interrelated scales, ranging from...

272

NREL: Distributed Grid Integration Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

the electric power system by integrating distributed energy and renewable energy systems along with advanced power electronics and control systems. NREL optimizes distributed...

273

Summary - Major Risk Factors Integrated Facility Disposition...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

& ORNL, Oak Ridge, TN EM Project: Integrated Facility Disposition Project (IFDP) ETR Report Date: August 2008 ETR-15 United States Department of Energy Office of Environmental...

274

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window.

Wang, Xucheng (Lisle, IL)

1996-01-01T23:59:59.000Z

275

Gated integrator with signal baseline subtraction  

DOE Patents (OSTI)

An ultrafast, high precision gated integrator includes an opamp having differential inputs. A signal to be integrated is applied to one of the differential inputs through a first input network, and a signal indicative of the DC offset component of the signal to be integrated is applied to the other of the differential inputs through a second input network. A pair of electronic switches in the first and second input networks define an integrating period when they are closed. The first and second input networks are substantially symmetrically constructed of matched components so that error components introduced by the electronic switches appear symmetrically in both input circuits and, hence, are nullified by the common mode rejection of the integrating opamp. The signal indicative of the DC offset component is provided by a sample and hold circuit actuated as the integrating period begins. The symmetrical configuration of the integrating circuit improves accuracy and speed by balancing out common mode errors, by permitting the use of high speed switching elements and high speed opamps and by permitting the use of a small integrating time constant. The sample and hold circuit substantially eliminates the error caused by the input signal baseline offset during a single integrating window. 5 figs.

Wang, X.

1996-12-17T23:59:59.000Z

276

Integrated Codes | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Codes | National Nuclear Security Administration Integrated Codes | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog IC Integrated Codes Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and Institutional R&D Programs > ASC Program Elements > Integrated Codes

277

Integrated Chemical, Thermal, Mechanical and Hydrological Modeling...  

Open Energy Info (EERE)

489,476 1,602,500 Retrieved from "http:en.openei.orgwindex.php?titleIntegratedChemical,Thermal,MechanicalandHydrologicalModeling&oldid313283" Category:...

278

An Integrated Computational Model for Additive Manufacturing ...  

Science Conference Proceedings (OSTI)

As part of this integrated model, this paper describes a macroscopic thermo- mechanical modeling approach to simulate the layer-by-layer AM process to build ...

279

Integrated Ingredients Dehydrated Agricultural Drying Low Temperature...  

Open Energy Info (EERE)

Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon Integrated Ingredients Dehydrated Agricultural Drying Low Temperature Geothermal Facility Jump...

280

NETL: CCPI - Demonstration of Integrated Optimization Software...  

NLE Websites -- All DOE Office Websites (Extended Search)

Control Devices - Multi-Pollutant Control Technologies Demonstration of Integrated Optimization Software at the Baldwin Energy Complex - Project Brief PDF-458KB...

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Integrated Safety Management (ISM) - System Descriptions  

NLE Websites -- All DOE Office Websites (Extended Search)

System Descriptions Integrated Safety Management (ISM) ism logo Sample DOE Contractor ISM System Descriptions Sample DOE Site Office ISM System Descriptions DOE HQ Program Office...

282

Integrated Safety Management (ISM) - Safety Culture Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Culture Resources Integrated Safety Management (ISM) Safety from the Operator's Perspective: We are All in this Together (2005) - Jim Ellis, President and CEO, Institute of...

283

Integrated Used Nuclear Fuel Storage, Transportation, and ...  

Researchers at ORNL have developed an integrated system that reduces the total life-cycle cost of used fuel storage while improving overall safety. This multicanister ...

284

Integration of Demand Side Management, Distributed Generation...  

Open Energy Info (EERE)

Page Edit with form History Facebook icon Twitter icon Integration of Demand Side Management, Distributed Generation, Renewable Energy Sources, and Energy Storages:...

285

Duke Energy's Edwardsport Integrated Gasification Combined Cycle...  

NLE Websites -- All DOE Office Websites (Extended Search)

Duke Energy's Edwardsport Integrated Gasification Combined Cycle (IGCC) Station presently under construction in Knox County, Indiana. (Photos courtesy of Duke Energy.) Gasification...

286

NREL: Transmission Grid Integration - Issues Affecting Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

issues related to the integration of renewable energy sources into the transmission system. Developing solutions to these challenges will enable higher penetrations of...

287

NREL: Transmission Grid Integration - Working With Us  

NLE Websites -- All DOE Office Websites (Extended Search)

Working With Us NREL works with industry, government, and academia on transmission integration research. Learn how you can work with us. Develop Technology Partnerships There are a...

288

Integrating Infrastructure Planning: The Role of Schools  

E-Print Network (OSTI)

Integrating Infrastructure Planning: The Role of Schools B Ypolice protection, and infrastructure that makes citiesplan to upgrade critical infrastructure. The plan calls for

McKoy, Deborah; Vincent, Jeffrey M.; Makarewicz, Carrie

2008-01-01T23:59:59.000Z

289

Independent Oversight Review of Integrated Safety Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

Enforcement and Oversight Independent Oversight Review of Integrated Safety Management System Effectiveness at the Livermore Site Office October 2011 Office of Safety and Emergency...

290

NREL: Transmission Grid Integration - Eastern Renewable Generation...  

NLE Websites -- All DOE Office Websites (Extended Search)

transmission? How does geographic diversity of wind reduce wind integration costs? How do offshore and onshore wind power compare? What transmission is needed to facilitate higher...

291

NREL: Transmission Grid Integration Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Photo of transmission lines with a city in the background. NREL works with electric utilities, energy policymakers, and other industry partners to integrate large-scale renewable...

292

NREL: Energy Systems Integration - Visualization of Electric...  

NLE Websites -- All DOE Office Websites (Extended Search)

Visualization of Electric Power System Information Workshop The Energy Systems Integration Facility workshop, Visualization of Electric Power System Information, was held September...

293

Integrated Computational Materials Engineering (ICME): Education ...  

Science Conference Proceedings (OSTI)

PI-10: Coupled Composition-Microstructure Modeling of a U-Pu-Zr Fuel · PI-11: Creating an Integrated, Community-Sourced, First-Principles Data Repository.

294

Transportation and Stationary Power Integration Workshop Agenda...  

NLE Websites -- All DOE Office Websites (Extended Search)

I: Project Overview and Federal Perspective Moderator: Marc Melaina, NREL 1. Transportation and Stationary Power Integration Analysis Scope and Approach Fred Joseck, U.S....

295

Building America Systems Integration Research Annual Report:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Research Annual Report: FY 2012 Prepared for: Building America Building Technologies Program Office of Energy Efficiency and Renewable Energy U.S....

296

NREL: Biomass Research - Capabilities in Integrated Biorefinery...  

NLE Websites -- All DOE Office Websites (Extended Search)

pilot plant, researchers study biochemical processes for converting lignocellulosic biomass to ethanol. At NREL, teams of researchers focus on developing an integrated...

297

An Integrated Hydrogen Vision for California  

E-Print Network (OSTI)

An Integrated Hydrogen Vision for California White Paper/High Efficiency Generation Of Hydrogen Fuels Using NuclearU.S. Department of Energy Hydrogen Fuel Cells and Hydrogen

2004-01-01T23:59:59.000Z

298

Structural Integration Design For Enhanced Photoluminescence in ...  

Science Conference Proceedings (OSTI)

Author(s), Tongxiang Fan. On-Site Speaker (Planned), Tongxiang Fan. Abstract Scope, In this presentation, we present a structural integration design in butterfly  ...

299

Integrated Emissions Control -- Process Review Update  

Science Conference Proceedings (OSTI)

This report provides an update of multi-pollutant control processes previously evaluated in EPRI report 1006876, "Integrated Emissions Control -- Process Review."

2002-10-01T23:59:59.000Z

300

Enabling Elements of Integrated Computational Materials and ...  

Science Conference Proceedings (OSTI)

Enabling technologies in the areas of advanced physics-based models, ... toward true integration of computational material and manufacturing science and ...

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Renewable Electrolysis Integrated Systems Development and Testing...  

NLE Websites -- All DOE Office Websites (Extended Search)

integrated renewable hydrogen demonstration project to support industry innovation and DOE Technology Validation goals. Technical Barriers This project addresses the following...

302

Measurement Science for Integration of Robotics and ...  

Science Conference Proceedings (OSTI)

... A barrier to achieving this potential is the high cost to integrate the components of a robot workcell, typically an order of magnitude higher than the ...

2013-01-04T23:59:59.000Z

303

Intelligence Analysis, Integration, and Exploitation: Principal...  

NLE Websites -- All DOE Office Websites (Extended Search)

Paul Dunn Administrator Sylvia Quintana Phone: 1-505-667-4730 Fax: 1-505-667-4332 Intelligence Analysis, Integration, and Exploitation LANL has worked with the intelligence...

304

Transportation and Stationary Power Integration Workshop: "An...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seminar 2008 Transportation and Stationary Power Integration Workshop "An Automaker's Views on the Transition to Hydrogen and Fuel Cell Vehicles" Phoenix, AZ 27 October 2008 Britta...

305

Integrated thin film batteries on silicon  

E-Print Network (OSTI)

Monolithic integration has been implemented successfully in complementary metal oxide semiconductor (CMOS) technology and led to improved device performance, increased reliability, and overall cost reduction. The next ...

Ariel, Nava

2005-01-01T23:59:59.000Z

306

Adaptive Urban Dispersion Integrated Model  

DOE Green Energy (OSTI)

Numerical simulations represent a unique predictive tool for understanding the three-dimensional flow fields and associated concentration distributions from contaminant releases in complex urban settings (Britter and Hanna 2003). Utilization of the most accurate urban models, based on fully three-dimensional computational fluid dynamics (CFD) that solve the Navier-Stokes equations with incorporated turbulence models, presents many challenges. We address two in this work; first, a fast but accurate way to incorporate the complex urban terrain, buildings, and other structures to enforce proper boundary conditions in the flow solution; second, ways to achieve a level of computational efficiency that allows the models to be run in an automated fashion such that they may be used for emergency response and event reconstruction applications. We have developed a new integrated urban dispersion modeling capability based on FEM3MP (Gresho and Chan 1998, Chan and Stevens 2000), a CFD model from Lawrence Livermore National Lab. The integrated capability incorporates fast embedded boundary mesh generation for geometrically complex problems and full three-dimensional Cartesian adaptive mesh refinement (AMR). Parallel AMR and embedded boundary gridding support are provided through the SAMRAI library (Wissink et al. 2001, Hornung and Kohn 2002). Embedded boundary mesh generation has been demonstrated to be an automatic, fast, and efficient approach for problem setup. It has been used for a variety of geometrically complex applications, including urban applications (Pullen et al. 2005). The key technology we introduce in this work is the application of AMR, which allows the application of high-resolution modeling to certain important features, such as individual buildings and high-resolution terrain (including important vegetative and land-use features). It also allows the urban scale model to be readily interfaced with coarser resolution meso or regional scale models. This talk will discuss details of the approach and present results for some example calculations performed in Manhattan in support of the DHS Urban Dispersion Program (UDP) using some of the tools developed as part of this new capability.

Wissink, A; Chand, K; Kosovic, B; Chan, S; Berger, M; Chow, F K

2005-11-03T23:59:59.000Z

307

GPFS HPSS Integration: Implementation Experience  

SciTech Connect

In 2005 NERSC and IBM Global Services Federal began work to develop an integrated HSM solution using the GPFS file system and the HPSS hierarchical storage system. It was foreseen that this solution would play a key role in data management at NERSC, and fill a market niche for IBM. As with many large and complex software projects, there were a number of unforeseen difficulties encountered during implementation. As the effort progressed, it became apparent that DMAPI alone could not be used to tie two distributed, high performance systems together without serious impact on performance. This document discusses the evolution of the development effort, from one which attempted to synchronize the GPFS and HPSS name spaces relying solely on GPFS?s implementation of the DMAPI specification, to one with a more traditional HSM functionality that had no synchronized namespace in HPSS, and finally to an effort, still underway, which will provide traditional HSM functionality, but requires features from the GPFS Information Lifecycle Management (ILM) to fully achieve this goal in a way which is scalable and meets the needs of sites with aggressive performance requirements. The last approach makes concessions to portability by using file system features such as ILM and snapshotting in order to achieve a scalable design.

Hazen, Damian; Hick, Jason

2008-08-12T23:59:59.000Z

308

The CMS integration grid testbed  

SciTech Connect

The CMS Integration Grid Testbed (IGT) comprises USCMS Tier-1 and Tier-2 hardware at the following sites: the California Institute of Technology, Fermi National Accelerator Laboratory, the University of California at San Diego, and the University of Florida at Gainesville. The IGT runs jobs using the Globus Toolkit with a DAGMan and Condor-G front end. The virtual organization (VO) is managed using VO management scripts from the European Data Grid (EDG). Gridwide monitoring is accomplished using local tools such as Ganglia interfaced into the Globus Metadata Directory Service (MDS) and the agent based Mona Lisa. Domain specific software is packaged and installed using the Distribution After Release (DAR) tool of CMS, while middleware under the auspices of the Virtual Data Toolkit (VDT) is distributed using Pacman. During a continuous two month span in Fall of 2002, over 1 million official CMS GEANT based Monte Carlo events were generated and returned to CERN for analysis while being demonstrated at SC2002. In this paper, we describe the process that led to one of the world's first continuously available, functioning grids.

Graham, Gregory E.

2004-08-26T23:59:59.000Z

309

MHD Integrated Topping Cycle Project  

DOE Green Energy (OSTI)

This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

Not Available

1992-02-01T23:59:59.000Z

310

Calculating Wind Integration Costs: Separating Wind Energy Value from Integration Cost Impacts  

DOE Green Energy (OSTI)

Accurately calculating integration costs is important so that wind generation can be fairly compared with alternative generation technologies.

Milligan, M.; Kirby, B.

2009-07-01T23:59:59.000Z

311

Adjoint Error Correction for Integral Outputs  

E-Print Network (OSTI)

gradient near the leading edge of the wing, causing boundary layer separation and premature transition. Alter- natively, one might be concerned about wing/pylon/nacelle integration, in which case one might. Occasionally, volume integrals are of importance. For example, the infra-red signature of a military aircraft

Pierce, Niles A.

312

Innovative approaches to integrated global change modelling  

Science Conference Proceedings (OSTI)

Integrated models are important tools to investigate the interactions between planetary processes and the growing impacts of human populations - in short: global change. Current models still have significant shortcomings, notably in their representation ... Keywords: Global change, Innovative approaches, Integrated assessment, Modelling, Research priorities

Carlo Giupponi, Mark E. Borsuk, Bert J. M. De Vries, Klaus Hasselmann

2013-06-01T23:59:59.000Z

313

Reliability Considerations from Integration of Smart Grid  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Considerations Considerations from the Integration of Smart Grid 116-390 Village Blvd., Princeton, NJ 08540 609.452.8060 | 609.452.9550 fax www.nerc.com the reliability of the to ensure bulk power system December 2010 (This page intentionally left blank) to ensure the reliability of the bulk power system Reliability Considerations of Integration of Smart Grid i

314

Substation Integrated Automation System Based on DSP  

Science Conference Proceedings (OSTI)

This Paper introduces the application of digital signal processor (DSP) at Substation Integrated Automation System. Using the powerful digital signal processing capability of DSP, high-speed multi-channel data acquisition function, and excellent data ... Keywords: Substation, Digital Signal Processor, Integrated Automation System

Yanzhe Li; Duowang Fan; Xuwei Dong

2009-08-01T23:59:59.000Z

315

Data Integration Overview Zachary G. Ives  

E-Print Network (OSTI)

Data Integration Overview Zachary G. Ives University of Pennsylvania January 13, 2003 CIS 650 ­ Data Sharing and the Web #12;2 Data Integration / "Mediators" Problem: Preponderance of different data sources with overlapping data Different systems within an enterprise Different information brokers

Ives, Zachary G.

316

Principal curvatures from the integral invariant viewpoint  

Science Conference Proceedings (OSTI)

The extraction of curvature information for surfaces is a basic problem of Geometry Processing. Recently an integral invariant solution of this problem was presented, which is based on principal component analysis of local neighborhoods defined by kernel ... Keywords: Integral invariants, Principal curvatures, Robustness

Helmut Pottmann; Johannes Wallner; Yong-Liang Yang; Yu-Kun Lai; Shi-Min Hu

2007-11-01T23:59:59.000Z

317

Energy Storage Integration Council (ESIC): 2013 Update  

Science Conference Proceedings (OSTI)

Recent electric energy storage deployments have encountered several challenges, including problems stemming from poor system integration, grid integration difficulties, insufficient factory testing and qualification, safety and reliability issues, and inadequate common test protocols. The utility industry needs clear requirements developed so vendors can manufacture cost-effective energy storage products to support the generation, transmission, and distribution system. To address these and related ...

2013-12-26T23:59:59.000Z

318

Space, time and nesting Integrated Assessment Models  

Science Conference Proceedings (OSTI)

Integrated Assessment Modelling in the field of air pollution has advanced greatly since the 1985 Helsinki Protocol on the reduction of Sulphur emissions and their transboundary fluxes. With subsequent protocols and increased understanding of the inter-relationships ... Keywords: CLRTAP, Integrated Assessment Modelling, Scale, Science-policy interaction, Space, Time

T. Oxley; H. M. ApSimon

2007-12-01T23:59:59.000Z

319

Hardware trust implications of 3-D integration  

Science Conference Proceedings (OSTI)

3-D circuit-level integration is a chip fabrication technique in which two or more dies are stacked and combined into a single circuit through the use of vertical electroconductive posts. Since the dies may be manufactured separately, 3-D circuit integration ...

Ted Huffmire; Timothy Levin; Michael Bilzor; Cynthia E. Irvine; Jonathan Valamehr; Mohit Tiwari; Timothy Sherwood; Ryan Kastner

2010-10-01T23:59:59.000Z

320

Integrating Ecological Data: Notes from the Grasslands ANPP Data Integration Project  

E-Print Network (OSTI)

Integrating Ecological Data: Notes from the Grasslands ANPP Data Integration Project Judith B, Kansas State University, Manhattan, KS 66506, 7 South African National Parks, Scientific Services across sites. The Grasslands ANPP Data Integration (GDI) project has brought together experts in ecology

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Program Management » Quality Assurance » Integrated Services » Program Management » Quality Assurance » Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the

322

Buildings to Grid Integration | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Buildings to Grid Integration The U.S. Department of Energy is coordinating strategies and activities with companies, individuals, and government entities to address the integration and optimization of buildings with the nation's energy grid. Buildings and the Energy Grid As electricity demand continues to increase, integrating buildings and the electricity grid is a key step to increasing energy efficiency. Intermittent and/or variable generation sources and loads, such as those of electric vehicles, are being installed on the grid in increasing numbers and at more distributed locations. For example, the U.S. government, many states, municipalities, and utility service areas are diversifying and distributing their generation mix, including a larger percentage of

323

NREL: Sustainable NREL - Energy Systems Integration Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Systems Integration Facility Energy Systems Integration Facility A close-up photo of a grey and yellow research facility. The Energy Systems Integration Facility The Energy Systems Integration Facility (ESIF), designed to Platinum-level standards of U.S. Green Building Council's Leadership in Energy and Environmental Design (LEED®), incorporates a large number of energy efficiency and sustainability practices. Researchers housed within will help overcome challenges related to the interconnection of distributed energy systems and the integration of renewable energy technologies into the electricity grid. The ESIF will also contain advanced computational capability. Fast Facts Cost: $135M Square feet: 182,500 Occupants: 205 Labs/Equipment: 14 laboratories, an Insight Visualization Center, a

324

Integrated Development Projects Ltd | Open Energy Information  

Open Energy Info (EERE)

Development Projects Ltd Development Projects Ltd Jump to: navigation, search Name Integrated Development Projects Ltd Place Devon, United Kingdom Zip EX18 7BL Sector Biomass Product The company's emphasis is placed on economic development in rural areas, and deplying biomass and municipal waste for electricity and CHP both in the UK and overseas. Their foundation project in North Devon includes a 40MWe biomass electricity plant. References Integrated Development Projects Ltd[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Integrated Development Projects Ltd is a company located in Devon, United Kingdom . References ↑ "Integrated Development Projects Ltd" Retrieved from "http://en.openei.org/w/index.php?title=Integrated_Development_Projects_Ltd&oldid=347004"

325

Integrated Safety Management Policy | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Safety Management Policy Integrated Safety Management Policy This Integrated Safety Management (ISM) System Description (ISMSD) defines how the U.S. Department of Energy (DOE) Office of Environmental Management (EM) integrates environment, safety, and health requirements and controls into Federal work activities, and oversees implementation of ISM within EM federal and contractor activities. It explains our safety values, objectives and approach for ensuring protection to the public, worker and the environment, consistent with DOE Policy 450.4, Safety Management System Policy. The ISMSD describes how EM conducts work following the seven ISM Guiding Principles, the five ISM core functions, and also incorporates the four supplemental safety culture elements from DOE Implementation Plan to

326

Buildings to Grid Integration | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Buildings to Grid Integration The U.S. Department of Energy is coordinating strategies and activities with companies, individuals, and government entities to address the integration and optimization of buildings with the nation's energy grid. Buildings and the Energy Grid As electricity demand continues to increase, integrating buildings and the electricity grid is a key step to increasing energy efficiency. Intermittent and/or variable generation sources and loads, such as those of electric vehicles, are being installed on the grid in increasing numbers and at more distributed locations. For example, the U.S. government, many states, municipalities, and utility service areas are diversifying and distributing their generation mix, including a larger percentage of

327

Solar Integrated Technologies SIT | Open Energy Information  

Open Energy Info (EERE)

SIT SIT Jump to: navigation, search Name Solar Integrated Technologies (SIT) Place Los Angeles, California Zip 90058 Product California-based manufacturer and installer of PV power systems on flat roofs for relatively large-scale commercial and industrial applications and subsidiary of Energy Conversion Devices (ECD). References Solar Integrated Technologies (SIT)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Integrated Technologies (SIT) is a company located in Los Angeles, California . References ↑ "[pointer=1&cHash=a585cf0cd0 Solar Integrated Technologies (SIT)]" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Integrated_Technologies_SIT&oldid=351294

328

DOE Hydrogen Analysis Repository: Biomass Integrated Gasification  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Integrated Gasification Combined-Cycle Power Systems Biomass Integrated Gasification Combined-Cycle Power Systems Project Summary Full Title: Cost and Performance Analysis of Biomass-Based Integrated Gasification Combined-Cycle (BIGCC) Power Systems Project ID: 106 Principal Investigator: Margaret Mann Brief Description: This project examines the cost and performance potential of three biomass-based integrated gasification combined cycle (IGCC) systems--high-pressure air blown, low-pressure air blown, and low-pressure indirectly heated. Purpose Examine the cost and performance potential of three biomass-based integrated gasification combined cycle (IGCC) systems - a high pressure air-blown, a low pressure indirectly heated, and a low pressure air-blown. Performer Principal Investigator: Margaret Mann

329

Advanced Grid Integration (AGI) | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Grid Integration (AGI) Advanced Grid Integration (AGI) Advanced Grid Integration (AGI) The Advanced Grid Integration (AGI) Division leads the federal government's efforts to accelerate modernization of the U.S. electric power grid. By enabling the two-way flow of electricity and information, a Smart Grid will increase the reliability, efficiency, and security of electric transmission, distribution, and use. A modern grid provides the foundation for a strong economy by enabling the integration of clean, renewable energy sources like wind and solar power and supporting the needs of an increasingly digital economy. AGI leverages energy industry cost-share and collaboration to foster the deployment of smart grid technologies and systems and reduce barriers to investment. To accomplish this, the Program is pursuing five core

330

Definition: Network Integration Transmission Service | Open Energy  

Open Energy Info (EERE)

Network Integration Transmission Service Network Integration Transmission Service Jump to: navigation, search Dictionary.png Network Integration Transmission Service Service that allows an electric transmission customer to integrate, plan, economically dispatch and regulate its network reserves in a manner comparable to that in which the Transmission Owner serves Native Load customers.[1] Related Terms transmission lines, transmission customer, transmission line, native load, smart grid References ↑ Glossary of Terms Used in Reliability Standards An inli LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ne Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Network_Integration_Transmission_Service&oldid=502560" Categories: Definitions

331

NREL: Transmission Grid Integration - Data and Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Data and Resources Data and Resources NREL offers the following transmission integration-related data and resources. Eastern Wind Dataset A key task of the Eastern Wind Integration and Transmission Study was to develop a dataset of three years of modeled time series wind speed and power. This dataset was designed to help energy professionals perform wind integration studies, compare potential wind sites spatially and temporally, and estimate power production from hypothetical wind plants. Western Wind Dataset A primary task of the Western Wind and Solar Integration Study was to produce a comprehensive dataset that could be used to model the build-out of potential wind plants in the Western United States. This dataset was designed to help energy professionals perform wind integration studies,

332

NREL: Wind Research - Utility Grid Integration Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility Grid Integration Assessment Utility Grid Integration Assessment Photo of large power transmission towers set against a sunset. The national need for transmission improvements will have a direct impact on the effective use of renewable energy sources such as wind. For wind energy to play a larger role in supplying the nation's energy needs, integrating wind energy into the power grid of the United States is an important challenge to address. NREL's transmission grid integration staff collaborates with utility industry partners and provides data, analysis, and techniques to increase utility understanding of integration issues and confidence in the reliability of new wind turbines. For more information, contact Brian Parsons at 303-384-6958. Printable Version Wind Research Home Capabilities

333

NREL: Electricity Integration Research Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Photo of power lines with sky and clouds in the background. Photo of power lines with sky and clouds in the background. Electricity integration at NREL enables renewable energy technologies to be fully integrated into the planning and operations of the grid-from ultra-high-voltage transmission systems to medium- and low-voltage distribution grids. The U.S. electric power system is undergoing significant changes in how electricity is produced and delivered to customers. Reduced costs and new requirements are increasing the amount of variable renewable energy that is being integrated into the power system. Smart Grid technologies that add communications and control to the grid are also changing the way the electric power system operates. Distributed Grid Integration Research Distributed grid integration R&D at NREL focuses on solar photovoltaic

334

Power Systems Integration Laboratory (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Power Systems Integration Laboratory at the Energy Systems Integration Facility. At NREL's Power Systems Integration Laboratory in the Energy Systems Integration Facility (ESIF), research focuses on developing and testing large-scale distributed energy systems for grid-connected, stand-alone, and microgrid applications. The laboratory can accommodate large power system components such as inverters for photovoltaic (PV) and wind systems, diesel and natural gas generators, battery packs, microgrid interconnection switchgear, and vehicles. Closely coupled with the research electrical distribution bus at the ESIF, the Power Systems Integration Laboratory will offer power testing capability of megawatt-scale DC and AC power systems, as well as advanced hardware-in-the-loop and model-in-the-loop simulation capabilities. Thermal heating and cooling loops and fuel also allow testing of combined heating/cooling and power systems (CHP).

Not Available

2011-10-01T23:59:59.000Z

335

On-clip high frequency reliability and failure test structures  

DOE Patents (OSTI)

Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer. 22 figs.

Snyder, E.S.; Campbell, D.V.

1997-04-29T23:59:59.000Z

336

On-clip high frequency reliability and failure test structures  

DOE Patents (OSTI)

Self-stressing test structures for realistic high frequency reliability characterizations. An on-chip high frequency oscillator, controlled by DC signals from off-chip, provides a range of high frequency pulses to test structures. The test structures provide information with regard to a variety of reliability failure mechanisms, including hot-carriers, electromigration, and oxide breakdown. The system is normally integrated at the wafer level to predict the failure mechanisms of the production integrated circuits on the same wafer.

Snyder, Eric S. (Albuquerque, NM); Campbell, David V. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

337

Integrated power management for microsystems  

DOE Green Energy (OSTI)

There is a need for a universal power module for microsystems. This module should provide power conditioning, energy storage, and load matching for a variety of energy sources and loads such as microelectromechanical systems (MEMS) and wireless sensors and micro-robots. There are a variety of potential ambient and human powered energy sources, which can supply some of the power needs of the military. The challenge is to capture these available sources of electrical energy and condition them to meet the voltage, current, and overall power demands of field-deployable microelectronics and MEMs-based devices such as wireless sensors and micro-robots. Most natural and man-made energy sources found in the environment have a low specific power and are not generally available on a continuous basis. Likewise, human-based energy sources must be optimally managed to meet the power needs in the field. Therefore, a power supply must have the ability to capture the available energy and store it in such a manner to be useful to meet the mission requirements of the device that is connected to the source. It must continuously monitor the status of energy stored and determine the expected demands of the device. A microelectronics-based power management chip can be developed to meet these objectives. The major challenge in realizing this concept will be the design of an intelligent power-conditioning chip that consumes a minimum of power to perform the functions of power conditioning, storage, load matching, and status monitoring. The prototype power conditioning integrated circuit would be capable of delivering a peak power of 100 mW at 5 V. The nominal operating condition would be a very low duty cycle for a relatively high power load, and a low-power source available for long periods of time, or a moderate-power source available intermittently.

Fry, D.N.; Wintenberg, A.L.; Bryan, B.L. [Oak Ridge National Lab., TN (United States). Instrumentation and Controls Div.

1997-12-01T23:59:59.000Z

338

Buildings to Grid Integration Technical Meeting: National Renewable Energy Laboratory, Energy Systems Integration Facility, Golden, CO  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings to Grid Integration Buildings to Grid Integration Technical Meeting: National Renewable Energy Laboratory, Energy Systems Integration Facility Golden, CO December 2012 1 WELCOME Welcome to the Buildings to Grid Integration Technical Meeting and to Golden, Colorado. On behalf of the U.S. Department of Energy Building Technologies Program, I would like to thank you for attending and for your active participation. I look forward to meeting you and hearing your perspective on enabling significant buildings to grid integration. Everyone is here because we are working to make efficient transactions between buildings and the grid a commercial reality, whether it is through

339

INCCA: Integrated Climate and Carbon  

SciTech Connect

The INCCA (Integrated Climate and Carbon) initiative will develop and apply the ability to simulate the fate and climate impact of fossil fuel-derived carbon dioxide (CO{sub 2}) and aerosols on a global scale. Coupled climate and carbon cycle modeling like that proposed for INCCA is required to understand and predict the future environmental impacts of fossil fuel burning. At present, atmospheric CO{sub 2} concentrations are prescribed, not simulated, in large climate models. Credible simulations of the entire climate system, however, need to predict time-evolving atmospheric greenhouse forcing using anthropogenic emissions as the fundamental input. Predicting atmospheric COS concentrations represents a substantial scientific advance because there are large natural sources and sinks of carbon that are likely to change as a result of climate change. Both terrestrial (e.g., vegetation on land) and oceanic components of the carbon cycle are known to be sensitive to climate change. Estimates of the amount of man-made CO{sub 2} that will accumulate in the atmosphere depend on understanding the carbon cycle. For this reason, models that use CO{sub 2} emissions, not prescribed atmospheric concentrations, as fundamental inputs are required to directly address greenhouse-related questions of interest to policymakers. INCCA is uniquely positioned to make rapid progress in this high-priority area of global change modeling and prediction because we can leverage previous and ongoing LLNL developments, and use existing component models that are well-developed and published. The need for a vastly improved carbon dioxide prediction capability is appreciated by the DOE. As the US Accelerated Climate Prediction Initiative (ACPI) progresses, we expect the DOE will emphasize the carbon cycle as the next major department-level earth science focus. INCCA will position LLNL for substantial additional funding as this new focus is realized. In the limited time since our LDRD funding was first received (1 November 2000) we have made good progress in acquisition and testing of component models, applications of the terrestrial biosphere model, enhancements to the ocean carbon cycle model and development of the fossil fuel aerosol model.

Thompson, S L

2001-03-13T23:59:59.000Z

340

Chemical preconcentrator with integral thermal flow sensor  

DOE Patents (OSTI)

A chemical preconcentrator with integral thermal flow sensor can be used to accurately measure fluid flow rate in a microanalytical system. The thermal flow sensor can be operated in either constant temperature or constant power mode and variants thereof. The chemical preconcentrator with integral thermal flow sensor can be fabricated with the same MEMS technology as the rest of the microanlaytical system. Because of its low heat capacity, low-loss, and small size, the chemical preconcentrator with integral thermal flow sensor is fast and efficient enough to be used in battery-powered, portable microanalytical systems.

Manginell, Ronald P. (Albuquerque, NM); Frye-Mason, Gregory C. (Cedar Crest, NM)

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Integrated Forest Products Refinery (IFPR)  

SciTech Connect

Pre-extraction–kraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called “near neutral” pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 °C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwood chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the “near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the “near-neutral” green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid fr

van Heiningen, Adriaan R. P.

2010-05-29T23:59:59.000Z

342

INTEGRATED HYDROGEN STORAGE SYSTEM MODEL  

DOE Green Energy (OSTI)

Hydrogen storage is recognized as a key technical hurdle that must be overcome for the realization of hydrogen powered vehicles. Metal hydrides and their doped variants have shown great promise as a storage material and significant advances have been made with this technology. In any practical storage system the rate of H2 uptake will be governed by all processes that affect the rate of mass transport through the bed and into the particles. These coupled processes include heat and mass transfer as well as chemical kinetics and equilibrium. However, with few exceptions, studies of metal hydrides have focused primarily on fundamental properties associated with hydrogen storage capacity and kinetics. A full understanding of the complex interplay of physical processes that occur during the charging and discharging of a practical storage system requires models that integrate the salient phenomena. For example, in the case of sodium alanate, the size of NaAlH4 crystals is on the order of 300nm and the size of polycrystalline particles may be approximately 10 times larger ({approx}3,000nm). For the bed volume to be as small as possible, it is necessary to densely pack the hydride particles. Even so, in packed beds composed of NaAlH{sub 4} particles alone, it has been observed that the void fraction is still approximately 50-60%. Because of the large void fraction and particle to particle thermal contact resistance, the thermal conductivity of the hydride is very low, on the order of 0.2 W/m-{sup o}C, Gross, Majzoub, Thomas and Sandrock [2002]. The chemical reaction for hydrogen loading is exothermic. Based on the data in Gross [2003], on the order of 10{sup 8}J of heat of is released for the uptake of 5 kg of H{sub 2}2 and complete conversion of NaH to NaAlH{sub 4}. Since the hydride reaction transitions from hydrogen loading to discharge at elevated temperatures, it is essential to control the temperature of the bed. However, the low thermal conductivity of the hydride makes it difficult to remove the heat of reaction, especially in the relatively short target refueling times, see Attachment 3. This document describes a detailed numerical model for general metal hydride beds that couples reaction kinetics with heat and mass transfer, for both hydriding and dehydriding of the bed. The detailed model is part of a comprehensive methodology for the design, evaluation and modification of hydrogen storage systems. In Hardy [2007], scoping models for reaction kinetics, bed geometry and heat removal parameters are discussed. The scoping models are used to perform a quick assessment of storage systems and identify those which have the potential to meet DOE performance targets. The operational characteristics of successful candidate systems are then evaluated with the more detailed models discussed in this document. The detailed analysis for hydrogen storage systems is modeled in either 2 or 3-dimensions, via the general purpose finite element solver COMSOL Multiphysics{reg_sign}. The two-dimensional model serves to provide rapid evaluation of bed configurations and physical processes, while the three-dimensional model, which requires a much longer run time, is used to investigate detailed effects that do not readily lend themselves to two-dimensional representations. The model is general and can be adapted to any geometry or storage media. In this document, the model is applied to a modified cylindrical shell and tube geometry with radial fins perpendicular to the axis, see Figures 4.1-1 and 4.1-2. Sodium alanate, NaAlH{sub 4}, is used as the hydrogen storage medium. The model can be run on any DOS, LINUX or Unix based system.

Hardy, B

2007-11-16T23:59:59.000Z

343

Overview of Integrated Waste Treatment Unit  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Waste Treatment Unit Overview Integrated Waste Treatment Unit Overview Overview for the DOE High Level Waste Corporate Board March 5, 2009 safety  performance  cleanup  closure M E Environmental Management Environmental Management 2 2 Integrated Waste Treatment Unit Mission * Mission - Project mission is to provide treatment of approximately 900,000 gallons of tank farm waste - referred to as sodium bearing waste (SBW) - stored at the Idaho Tank Farm Facility to a stable waste form suitable for disposition at the Waste Isolation Pilot Plant (WIPP). - Per the Idaho Cleanup Project contract, the resident Integrated Waste Treatment Unit (IWTU) facility, shall have the capability for future packaging and shipping of the existing high level waste (HLW) calcine to the geologic

344

SunShot Initiative: Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems Integration Systems Integration High Penetration Solar Portal The High Penetration Solar Portal has timely information related to high penetration solar scenarios and integrating solar into the grid. The site allows utilities, grant awardees, regulators, researchers, and other solar professionals can easily share data, case studies, lessons learned, and demonstration project findings. Photo of power lines. Transmission line access is one challenge facing new utility-scale solar installations in the U.S. Photo by Dennis Schroeder, NREL 18981 Through the SunShot Initiative, the U.S. Department of Energy (DOE) supports the development of innovative, cost-effective solutions that allow increasing amounts of solar energy to integrate seamlessly with the national power grid while mitigating associated risks and reducing system costs. Such solutions will help achieve the SunShot goals by ensuring system reliability and encouraging the widespread deployment of solar technologies, such as photovoltaics and concentrating solar power.

345

Scientific Innovation Through Integration Capabilities Series  

E-Print Network (OSTI)

research in: êê Energy ­ making strides toward alternative energy sources êê Environmental research supercomputer were integrated to study platinum catalysts--materials used widely in industry for petroleum

346

Energy drift in reversible time integration  

E-Print Network (OSTI)

Energy drift is commonly observed in reversible integrations of systems of molecular dynamics. We show that this drift can be modelled as a diffusion and that the typical energy error after time T is O(?T).

R I McLachlan; M Perlmutter

2004-01-01T23:59:59.000Z

347

Metal Silicides: An Integral Part of Microelectronics  

Science Conference Proceedings (OSTI)

Metal silicide thin films are integral parts of all microelectronics devices. .... with activation energy around 1–1.5 eV for refractory metal/silicon systems and 0.5 eV

348

Energy Integration Visualization Room (Fact Sheet)  

SciTech Connect

This two-page fact sheet describes the new Energy Integration Visualization Room in the ESIF and talks about some of the capabilities and unique visualization features of the the room.

Not Available

2012-08-01T23:59:59.000Z

349

Nebraska Statewide Wind Integration Study: Executive Summary  

DOE Green Energy (OSTI)

Wind generation resources in Nebraska will play an increasingly important role in the environmental and energy security solutions for the state and the nation. In this context, the Nebraska Power Association conducted a state-wide wind integration study.

EnerNex Corporation, Knoxville, Tennessee; Ventyx, Atlanta, Georgia; Nebraska Power Association, Lincoln, Nebraska

2010-03-01T23:59:59.000Z

350

Variance of the Hydrostatically Integrated Height  

Science Conference Proceedings (OSTI)

In radiosonde applications the sonde height is required for assignment of winds and meteorological parameters. Usually, this height is obtained using the classical hydrostatic integration involving measurements of pressure (P) and virtual ...

Ranjit M. Passi; Vincent E. Lally

1988-11-01T23:59:59.000Z

351

NREL: Vehicle Ancillary Loads Reduction - Integrated Modeling  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Modeling Integrated Modeling NREL's Vehicle Ancillary Loads Reduction (VALR) team predicts the impact of advanced vehicle cooling technologies before testing by using an integrated modeling process. Evaluating the heat load on a vehicle under real world conditions is a difficult task. An accepted method to evaluate passenger compartment airflow and heat transfer is computational fluid dynamics. (CFD). Combining analytical models with CFD provides a powerful tool to assist industry both on current vehicles and on future design studies. Flow chart showing the vehicle integrated modeling process which considers solar radiation, air conditioning, and vehicles with CAD, glazing, cabin thermal/fluid, and thermal comfort modeling tools. Results are provided for fuel economy, tailpipe emissions and occupant thermal comfort.

352

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Groups > Groups > Energy Systems Integration Groups > Groups > Energy Systems Integration Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You must login in order to post into this group. Groups Menu You must login in order to post into this group. Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne Recent content OpenEI maintenance March 8-9, 2013 Research topics related to ESI Prospects for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System Integration(Smith 2001) more Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne

353

NSLS-II Integrated Project Team (IPT)  

NLE Websites -- All DOE Office Websites (Extended Search)

NSLS-II Integrated Project Team NSLS-II Integrated Project Team DOE uses an integrated project teaming approach for managing the NSLS-II Project. This Integrated Project Team (IPT), organized and led by the NSLS-II Federal Project Director, is an essential element in DOE's acquisition process and is being used during all phases of the project's life cycle. This team consists of professionals representing diverse disciplines with the specific knowledge, skills, and abilities to support the Federal Project Director in successfully executing the project. The IPT for the NSLS-II Project will consist of members from both DOE and the contractor, Brookhaven Science Associates (BSA). The team membership will change as the project progresses from initiation to closeout to ensure the necessary skills are always represented to meet the project's needs.

354

NREL: Sustainable NREL - Integrated Biorefinery Research Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Biorefinery Research Facility Integrated Biorefinery Research Facility A photo of a grey, three-story research facility on a large campus. The Integrated Biorefinery Research Facility The Integrated Biorefinery Research Facility (IBRF) incorporates a large number of energy efficiency and sustainability practices into its cutting-edge design. This facility received a Leadership in Energy and Environmental Design (LEED®) Gold-level certification from the U.S. Green Building Council and supports a variety of advanced biofuels projects and enables researchers and industry partners to develop, test, evaluate, and demonstrate processes for the production of bio-based products and fuels. Fast Facts Cost: $33.5M Square feet: 27,000 Occupants: 32 Labs/Equipment: high-bay biochemical conversion pilot plant that

355

NREL: Energy Analysis: Electric Sector Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Sector Integration Electric Sector Integration Integrating higher levels of renewable resources into the U.S. electricity system could pose challenges to the operability of the nation's grid. NREL's electric sector integration analysis work investigates the potential impacts of expanding renewable technology deployment on grid operations and infrastructure expansion including: Feasibility of higher levels of renewable electricity generation. Options for increasing electric system flexibility to accommodate higher levels of variable renewable electricity. Impacts of renewable electricity generation on efficiency and emissions of conventional generators. Grid expansion and planning to allow large scale deployment of renewable generation. Graphic showing a high concept diagram of how a modern electricity system can be designed to include storage and incorporate large scale renewable generation. High Renewable Generation Electric System Flexibility and Storage Impacts on Conventional Generators Transmission Infrastructure

356

Perspectives of Integrated Modeling at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

on Integrated Whole-Device Modeling on Integrated Whole-Device Modeling at NERSC Alexei Y. Pankin 1 , Arnold H. Kritz 2 , and Tariq Rafiq 2 1 Tech-X Corporation, Boulder, CO 2 Lehigh University, Bethlehem, PA Integrated Whole-Device Modeling of Tokamak Plasmas Studies in isolation of elements that describe plasma behavior (plasma heating, MHD equilibria, large scale instabilities, core and edge transport ...) * Do not capture interactive nature of physics described in whole-device integrated modeling simulations  It is important that we understand effects that result from interactions between various physical processes in tokamak plasmas Predictive whole-device modeling helps avoid costly design mistakes * Facilitates the optimization and control of experimental scenarios in order to make the most effective use of expensive experiments

357

Research Integrity | conmgtsys.ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

About ORNL About ORNL Fact Sheet Brochure Diversity Leadership Team Organization History Environmental Policy Corporate Giving Research Integrity Who we are, aren't About ORNL Home | ORNL | About ORNL | Research Integrity SHARE Research Integrity From the Director ORNL Research Code of Conduct Research Misconduct ORNL Policy on Research Integrity From the Director We enjoy an excellent scientific reputation at ORNL, thanks to a solid record of ethical conduct in every aspect of research. It is essential to our future that we maintain and nurture this reputation. We also have a responsibility to mentor the next generation of researchers to ensure that they too understand and adhere to the highest standards of ethical conduct. ORNL's Research Code of Conduct was developed by a committee of

358

NREL: Wind Research - Utility Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility Grid Integration Utility Grid Integration Photo of a wind farm in Lawton, Oklahoma where NREL researchers studied the impact of wind energy on farming system operations. NREL researchers analyzed research data collected from this wind farm in Lawton, Oklahoma, to determine the impacts of wind energy on systems operations. NREL researchers analyzed research data collected from this wind farm in Lawton, Oklahoma, to determine the impacts of wind energy on systems operations. The integration of wind energy into the electric generation industry's supply mix is one of the issues industry grapples with. The natural variability of the wind resource raises concerns about how wind can be integrated into routine grid operations, particularly with regard to the effects of wind on regulation, load following, scheduling, line voltage,

359

Green Integrated Design | Open Energy Information  

Open Energy Info (EERE)

Green Integrated Design Green Integrated Design Name Green Integrated Design Place Tempe, Arizona Zip 85283 Number of employees 1-10 Year founded 2009 Phone number 602-684-0462 Website http://www.GreenIntegratedDesi Coordinates 33.3684114°, -111.9343636° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.3684114,"lon":-111.9343636,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

360

NREL: Water Power Research - Grid Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Grid Integration High-voltage transmission lines and towers silouetted against a blue sky with the first glow of the rising sun on the horizon behind them. The national need for transmission improvements will have a direct impact on the effective use of renewable energy sources. For marine and hydrokinetic technologies to play a larger role in supplying the nation's energy needs, integration into the U.S. power grid is an important challenge to address. Efficient integration of variable power resources like water power is a critical part of the deployment planning and commercialization process. Variable and weather-dependent resources can create operational concerns for grid operators. These concerns include conventional generation ramping, load/generation balancing, and planning

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Energy Systems Integration Energy Systems Integration Home > Groups Content Group Activity By term Q & A Feeds Share your own status updates, and follow the updates & activities of others by creating your own account. Or, remember to log in If you already have an account. Groups Menu You must login in order to post into this group. Recent content OpenEI maintenance March 8-9, 2013 Research topics related to ESI Prospects for Nuclear Power(Davis 2012) A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Energy System Integration(Smith 2001) more Group members (8) Managers: Aaronbeach Recent members: Jim mcveigh Derekhogue Ads15 Marklane Qinsun Wisconsin Weatherall Windows Payne 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation:

362

Integrated decision support model for global sourcing  

E-Print Network (OSTI)

Over the last decade, the U.S. aircraft industry has experienced increasing levels of international integration as companies seek to access global talent and resources, cut production costs, spread financial risk, and ...

Mroczkowski, Victor A. (Victor Adam)

2008-01-01T23:59:59.000Z

363

Path integration for light transport in volumes  

Science Conference Proceedings (OSTI)

Simulating the transport of light in volumes such as clouds or objects with subsurface scattering is computationally expensive. We describe an approximation to such transport using path integration. Unlike the more commonly used diffusion approximation, ...

Simon Premože; Michael Ashikhmin; Peter Shirley

2003-06-01T23:59:59.000Z

364

Overview of the Integrated Global Radiosonde Archive  

Science Conference Proceedings (OSTI)

This paper provides a general description of the Integrated Global Radiosonde Archive (IGRA), a new radiosonde dataset from the National Climatic Data Center (NCDC). IGRA consists of radiosonde and pilot balloon observations at more than 1500 ...

Imke Durre; Russell S. Vose; David B. Wuertz

2006-01-01T23:59:59.000Z

365

RFI Well Integrity 06 JUL 1400  

Energy.gov (U.S. Department of Energy (DOE))

This PowerPoint report entitled "Well Integrity During Shut - In Operations: DOE/DOI Analyses" describes risks and suggests risk management recommendations associated with shutting in the well.

366

Strategies and Methodologies for Integrating Design Computation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Methodologies for Integrating Design Computation into the Design of High Density Quality Living Environment Speaker(s): Jin Yeu Tsou Date: October 9, 2002 - 12:00pm Location:...

367

Carbon nanotube synthesis for integrated circuit interconnects  

E-Print Network (OSTI)

Based on their properties, carbon nanotubes (CNTs) have been identified as ideal replacements for copper interconnects in integrated circuits given their higher current density, inertness, and higher resistance to ...

Nessim, Gilbert Daniel

2009-01-01T23:59:59.000Z

368

Integral data analysis for resonance parameters determination  

SciTech Connect

Neutron time-of-flight experiments have long been used to determine resonance parameters. Those resonance parameters have then been used in calculations of integral quantities such as Maxwellian averages or resonance integrals, and results of those calculations in turn have been used as a criterion for acceptability of the resonance analysis. However, the calculations were inadequate because covariances on the parameter values were not included in the calculations. In this report an effort to correct for that deficiency is documented: (1) the R-matrix analysis code SAMMY has been modified to include integral quantities of importance, (2) directly within the resonance parameter analysis, and (3) to determine the best fit to both differential (microscopic) and integral (macroscopic) data simultaneously. This modification was implemented because it is expected to have an impact on the intermediate-energy range that is important for criticality safety applications.

Larson, N.M.; Leal, L.C.; Derrien, H.

1997-09-01T23:59:59.000Z

369

Integrating Efficiency Into Climate Change Mitigation Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Efficiency Into Climate Change Mitigation Policy Speaker(s): Steven R. Schiller Date: December 8, 2008 - 12:00pm Location: 90-4133 Seminar HostPoint of Contact:...

370

Art as integral part of architectural space  

E-Print Network (OSTI)

To integrate art with architecture is the intention of every architect. However, many times other requirements overwhelm artistic potential. There are numerous good, simple examples in the history of architecture where ...

Vahtar, Marta

1993-01-01T23:59:59.000Z

371

An Integrated Surface Radiation Measurement System  

Science Conference Proceedings (OSTI)

An integrated surface radiation measurement system has been developed to measure the surface radiation exchange flux. The system employs upward- and downward-looking Eppley pyrgeometers and pyranometers to separately measure four components: ...

A. C. Delany; S. R. Semmer

1998-02-01T23:59:59.000Z

372

An Advanced Measurement Concept: The Integrated Sensor  

Science Conference Proceedings (OSTI)

An integrated sensor is a complete measurement system that communicates its signals to a data collection and archival facility. The paper describes the concept, and how it developed from and relates to the more traditional systems. It includes a ...

Julian M. Pike

1986-03-01T23:59:59.000Z

373

Incorporating LCA tools in integrated simulation environments  

SciTech Connect

In this paper we address the issue of building data schema evolution in integrated simulation environments, as seen from the perspective of incorporating LCA tools within these environments. First we describe the key features of an integrated simulation environment designed for expandability, focusing on (a) the mechanism for the expansion of the integrated environment, and (b) its overall system architecture that allows processes and data to be added to the system without modifications or restructuring of existing code. We then focus on how the data schema allows the inclusion and maintenance of specialized construction objects bearing LCA data. Finally, we discuss various integration issues that arise from modeling capabilities and idiosyncrasies of individual simulation and analysis tools.

Pal, Vineeta; Papamichael, Konstantinos; Bourassa, Norman; Loffeld, John J.

2001-02-01T23:59:59.000Z

374

Integrated Computational Modeling of Welding – Development to ...  

Science Conference Proceedings (OSTI)

Integrated computational modeling is considered as a viable pathway to ... lack of a standard verification and validation (V&V) documents to build a technical case. ... Evolution with the Impact of Anisotropic Grain Boundary Energy and Mobility.

375

Legacy model integration with repast simphony.  

SciTech Connect

Repast is a widely used, free, and open-source, agent-based modeling and simulation toolkit. Three Repast version 3 platforms are currently available, each of which has the same core features but with differing environments for these features. Repast Simphony (Repast S) extends the Repast 3 portfolio by offering a new approach to simulation development and execution. Repast S's new simulation development capabilities include direct support for integrating existing (i.e., legacy) file-based models into agent-based simulations. This paper reviews related work on model integration and data exchange; introduces the Repast S's legacy model integration system; and discusses how the new system can be used to integrate existing file-based models, either agent-based or nonagent-based, into agent models.

North, M. J.; Sydelko, P. J.; Vos, J. R.; Howe, T. R.; Collier, N. T.; Decision and Information Sciences; Univ. of Chicago; Univ. of Illinois; PantaRei Corp.

2006-01-01T23:59:59.000Z

376

Sun Microsystems: Integrating its Own Enterprise  

E-Print Network (OSTI)

Rev. Rev. Gr. Units Rev. Rev. Gr. Sun HP IBM Compaq* 4 n.a.Computergram International, Sun Says Server Growth RemainsSun Microsystems case 8-10-99 Sun Microsystems: Integrating

Kraemer, Kenneth L.; Dedrick, Jason

1999-01-01T23:59:59.000Z

377

Photonic integrated circuits for optical logic applications  

E-Print Network (OSTI)

The optical logic unit cell is the photonic analog to transistor-transistor logic in electronic devices. Active devices such as InP-based semiconductor optical amplifiers (SOA) emitting at 1550 nm are vertically integrated ...

Williams, Ryan Daniel

2007-01-01T23:59:59.000Z

378

Integrating Variable Renewable Energy: Challenges and Solutions  

NLE Websites -- All DOE Office Websites (Extended Search)

LLC This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.govpublications. Contract No. DE-AC36-08GO28308 Integrating Variable...

379

Proactive Renewables Integration for Utility Distribution Planning...  

NLE Websites -- All DOE Office Websites (Extended Search)

Proactive Renewables Integration for Utility Distribution Planning and Operations Speaker(s): Emma Stewart Date: March 5, 2013 - 12:00pm Location: 90-1099 Seminar HostPoint of...

380

Research and design : methods for integration  

E-Print Network (OSTI)

This study investigates the major factors which inhibit and foster the integration and application of research knowledge with design practice. The results are presented in two parts: Part I, a generic user handbook, and ...

Ness, Richard E

1984-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Regional Profiles for Distributed Resource Integration  

Science Conference Proceedings (OSTI)

This report characterizes regional drivers and challenges for distributed resource integration. Information gathered includes research and demonstration activities being conducted to integrate distributed resources into grid and market systems. The report summarizes lessons learned from literature review, workshops, and surveys conducted by EPRI in 2009 and 2010. The information gathered through these various channels is applied in this report towards identifying regional trends, demonstration needs, and...

2010-12-31T23:59:59.000Z

382

MHD Technology Transfer, Integration and Review Committee  

DOE Green Energy (OSTI)

This fifth semi-annual status report of the MHD Technology Transfer, Integration, and Review Committee (TTIRC) summarizes activities of the TTIRC during the period April 1990 through September 1990. It includes summaries and minutes of committee meetings, progress summaries of ongoing Proof-of-Concept (POC) contracts, discussions pertaining to technical integration issues in the POC program, and planned activities for the next six months.

Not Available

1992-01-01T23:59:59.000Z

383

Mixed wasted integrated program: Logic diagram  

SciTech Connect

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

Mayberry, J.; Stelle, S. [Science Applications International Corp., Idaho Falls, ID (United States); O`Brien, M. [Univ. of Arizona, Tucson, AZ (United States); Rudin, M. [Univ. of Nevada, Las Vegas, NV (United States); Ferguson, J. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States); McFee, J. [I.T. Corp., Albuquerque, NM (United States)

1994-11-30T23:59:59.000Z

384

Modeling for System Integration Studies (Presentation)  

SciTech Connect

This presentation describes some the data requirements needed for grid integration modeling and provides real-world examples of such data and its format. Renewable energy integration studies evaluate the operational impacts of variable generation. Transmission planning studies investigate where new transmission is needed to transfer energy from generation sources to load centers. Both use time-synchronized wind and solar energy production and load as inputs. Both examine high renewable energy penetration scenarios in the future.

Orwig, K. D.

2012-05-01T23:59:59.000Z

385

INTEGRAL observations of TeV plerions  

E-Print Network (OSTI)

Amongst the sources seen in very high gamma-rays several are associated with Pulsar Wind Nebulae (``TeV plerions''). The study of hard X-ray/soft gamma-ray emission is providing an important insight into the energetic particle population present in these objects. The unpulsed emission from pulsar/pulsar wind nebula systems in the energy range accessible to the INTEGRAL satellite is mainly synchrotron emission from energetic and fast cooling electrons close to their acceleration site. Our analyses of public INTEGRAL data of known TeV plerions detected by ground based Cherenkov telescopes indicate a deeper link between these TeV plerions and INTEGRAL detected pulsar wind nebulae. The newly discovered TeV plerion in the northern wing of the Kookaburra region (G313.3+0.6 powered by the middle aged PSR J1420-6048) is found to have a previously unknown INTEGRAL counterpart which is besides the Vela pulsar the only middle aged pulsar detected with INTEGRAL. We do not find an INTEGRAL counterpart of the TeV plerion associated with the X-ray PWN ``Rabbit'' G313.3+0.1 which is possibly powered by a young pulsar.

A. I. D. Hoffmann; D. Horns; A. Santangelo

2006-09-14T23:59:59.000Z

386

Energy Systems Integration Laboratory (Fact Sheet)  

Science Conference Proceedings (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Systems Integration Laboratory at the Energy Systems Integration Facility. The Energy Systems Integration Laboratory at NREL's Energy Systems Integration Facility (ESIF) provides a flexible, renewable-ready platform for research, development, and testing of state-of-the-art hydrogen-based and other energy storage systems. The main focus of the laboratory is assessment of the technical readiness, performance characterization, and research to help industry move these systems towards optimal renewable-based production and efficient utilization of hydrogen. Research conducted in the Energy Systems Integration Laboratory will advance engineering knowledge and market deployment of hydrogen technologies to support a growing need for versatile distributed electricity generation, applications in microgrids, energy storage for renewables integration, and home and station-based hydrogen vehicle fueling. Research activities are targeted to improve the technical readiness of the following: (1) Low and high temperature electrolyzers, reformers and fuel cells; (2) Mechanical and electrochemical compression systems; (3) Hydrogen storage; (4) Hydrogen vehicle refueling; and (5) Internal combustion or turbine technology for electricity production. Examples of experiments include: (1) Close- and direct-coupling of renewable energy sources (PV and wind) to electrolyzers; (2) Performance and efficiency validation of electrolyzers, fuel cells, and compressors; (3) Reliability and durability tracking and prediction; (4) Equipment modeling and validation testing; (5) Internal combustion or turbine technology for electricity production; and (6) Safety and code compliance.

Not Available

2011-10-01T23:59:59.000Z

387

INTEGRATED FISCHER TROPSCH MODULAR PROCESS MODEL  

Science Conference Proceedings (OSTI)

With declining petroleum reserves, increased world demand, and unstable politics in some of the world’s richest oil producing regions, the capability for the U.S. to produce synthetic liquid fuels from domestic resources is critical to national security and economic stability. Coal, biomass and other carbonaceous materials can be converted to liquid fuels using several conversion processes. The leading candidate for large-scale conversion of coal to liquid fuels is the Fischer Tropsch (FT) process. Process configuration, component selection, and performance are interrelated and dependent on feed characteristics. This paper outlines a flexible modular approach to model an integrated FT process that utilizes a library of key component models, supporting kinetic data and materials and transport properties allowing rapid development of custom integrated plant models. The modular construction will permit rapid assessment of alternative designs and feed stocks. The modeling approach consists of three thrust areas, or “strands” – model/module development, integration of the model elements into an end to end integrated system model, and utilization of the model for plant design. Strand 1, model/module development, entails identifying, developing, and assembling a library of codes, user blocks, and data for FT process unit operations for a custom feedstock and plant description. Strand 2, integration development, provides the framework for linking these component and subsystem models to form an integrated FT plant simulation. Strand 3, plant design, includes testing and validation of the comprehensive model and performing design evaluation analyses.

Donna Post Guillen; Richard Boardman; Anastasia M. Gribik; Rick A. Wood; Robert A. Carrington

2007-12-01T23:59:59.000Z

388

Integrated mold/surface-micromachining process  

Science Conference Proceedings (OSTI)

We detail a new monolithically integrated silicon mold/surface-micromachining process which makes possible the fabrication of stiff, high-aspect-ratio micromachined structures integrated with finely detailed, compliant structures. An important example, which we use here as our process demonstration vehicle, is that of an accelerometer with a large proof mass and compliant suspension. The proof mass is formed by etching a mold into the silicon substrate, lining the mold with oxide, filling it with mechanical polysilicon, and then planarizing back to the level of the substrate. The resulting molded structure is recessed into the substrate, forming a planar surface ideal for subsequent processing. We then add surface-micromachined springs and sense contacts. The principal advantage of this new monolithically integrated mold/surface-micromachining process is that it decouples the design of the different sections of the device: In the case of a sensitive accelerometer, it allows us to optimize independently the proof mass, which needs to be as large, stiff, and heavy as possible, and the suspension, which needs to be as delicate and compliant as possible. The fact that the high-aspect-ratio section of the device is embedded in the substrate enables the monolithic integration of high-aspect-ratio parts with surface-micromachined mechanical parts, and, in the future, also electronics. We anticipate that such an integrated mold/surface micromachining/electronics process will offer versatile high-aspect-ratio micromachined structures that can be batch-fabricated and monolithically integrated into complex microelectromechanical systems.

Barron, C.C.; Fleming, J.G.; Montague, S.; Sniegowski, J.J.; Hetherington, D.L.

1996-03-01T23:59:59.000Z

389

Building Technologies Office: Integrated Whole-Building Energy Diagnostics  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrated Integrated Whole-Building Energy Diagnostics Research Project to someone by E-mail Share Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on Facebook Tweet about Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on Twitter Bookmark Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on Google Bookmark Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on Delicious Rank Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on Digg Find More places to share Building Technologies Office: Integrated Whole-Building Energy Diagnostics Research Project on AddThis.com...

390

SunShot Initiative: CSP Heat Integration for Baseload Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

CSP Heat Integration for Baseload Renewable Energy Deployment to someone by E-mail Share SunShot Initiative: CSP Heat Integration for Baseload Renewable Energy Deployment on...

391

Secretary Moniz Speaks on New Energy Systems Integration Facility...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on New Energy Systems Integration Facility (ESIF) at NREL Secretary Moniz Speaks on New Energy Systems Integration Facility (ESIF) at NREL Addthis Speakers Secretary Ernest Moniz...

392

NREL: Energy Systems Integration - Campus, City, and Community...  

NLE Websites -- All DOE Office Websites (Extended Search)

Campus, City, and Community Integration Energy systems integration R&D on a campus, city, and community scale encompasses technologies such as campus energy aggregation,...

393

iManage Strategic Integrated Procurement Enterprise System (STRIPES...  

NLE Websites -- All DOE Office Websites (Extended Search)

iManage Strategic Integrated Procurement Enterprise System (STRIPES) PIA, Office of Procurement and Assistance Management iManage Strategic Integrated Procurement Enterprise System...

394

PIA - iManage Strategic Integrated Procurement Enterprise System...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PIA - iManage Strategic Integrated Procurement Enterprise System (STRIPES) PIA - iManage Strategic Integrated Procurement Enterprise System (STRIPES) PIA - iManage Strategic...

395

DOE Standard Integration Of Environment,Safety, and Health Into...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Standard Integration Of Environment,Safety, and Health Into Facility Disposition Activities DOE Standard Integration Of Environment,Safety, and Health Into Facility Disposition...

396

Integration in energy and transport amongst Azerbaijan, Georgia and Turkey.  

E-Print Network (OSTI)

??A limited process of integration has been occurring amongst the countries of Georgia, Azerbaijan, and Turkey. From the mid-1990s to 2008, integration amongst the three… (more)

Petersen, Alexandros

2012-01-01T23:59:59.000Z

397

Building America Top Innovations Hall of Fame Profile - Integration...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integration of HVAC System Design with Simplified Duct Distribution Building America Top Innovations Hall of Fame Profile - Integration of HVAC System Design with Simplified Duct...

398

Integrated Waste Treatment Facility Fact Sheet | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste Management Tank Waste and Waste Processing Integrated Waste Treatment Facility Fact Sheet Integrated Waste Treatment Facility Fact Sheet Waste Management Nuclear...

399

Integrating Renewable Energy into the Transmission and Distribution...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrating Renewable Energy into the Transmission and Distribution System of the U.S. Virgin Islands Integrating Renewable Energy into the Transmission and Distribution System of...

400

Guide to Integrating Renewable Energy in Federal Construction...  

NLE Websites -- All DOE Office Websites (Extended Search)

Acknowledgements to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Acknowledgements on Facebook Tweet about Guide to Integrating Renewable...

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Fast Automated Demand Response to Enable the Integration of Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fast Automated Demand Response to Enable the Integration of Renewable Resources Title Fast Automated Demand Response to Enable the Integration of Renewable Resources Publication...

402

The Integration of Energy Efficiency, Renewable Energy, Demand...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Integration of Energy Efficiency, Renewable Energy, Demand Response and Climate Change: Challenges and Opportunities for Evaluators and Planners Title The Integration of Energy...

403

An Economic Analysis of Used Electric Vehicle Batteries Integrated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis of Used Electric Vehicle Batteries Integrated into Commercial Building Microgrids Title An Economic Analysis of Used Electric Vehicle Batteries Integrated into...

404

Integrated Photonics for Low-Power Packet Networking  

E-Print Network (OSTI)

MARCH/APRIL 2011 Integrated Photonics for Low-Power Packetmaximizing the bene- ?ts of photonics technology is highlypower, and large-scale photonics integration. In this paper,

2011-01-01T23:59:59.000Z

405

Vehicle Technologies Office: Thermal Control and System Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Thermal Control and System Integration to someone by E-mail Share Vehicle Technologies Office: Thermal Control and System Integration on Facebook Tweet about Vehicle Technologies...

406

US Integrated Waste Services Association | Open Energy Information  

Open Energy Info (EERE)

to: navigation, search Name US Integrated Waste Services Association Place Washington, DC Product Focussed on promoting integrated solutions to municipal solid waste management...

407

Integrating Green and Sustainability Aspects into Life Cycle Performance Evaluation  

E-Print Network (OSTI)

Integrating Green and Sustainability Aspects into Life Cycleenables the integration of green manufacturing principlesKeywords Life cycle cost, green manufacturing, monitoring 1

Niggeschmidt, Stephan; Helu, Moneer; Diaz, Nancy; Behmann, Benjamin; Lanza, Gisela; Dornfeld, David

2010-01-01T23:59:59.000Z

408

Financial Vehicles within an Integrated Energy Efficiency Program...  

NLE Websites -- All DOE Office Websites (Extended Search)

Financial Vehicles within an Integrated Energy Efficiency Program Slide 1 Financial mechanisms within Integrated Energy Efficiency Programs Every successful energy efficiency...

409

2013 Integreated Safety Management Champions Workshop - May 15...  

NLE Websites -- All DOE Office Websites (Extended Search)

Integreated Safety Management Champions Workshop May 15-16, 2013 DOE Forrestal Headquarters Auditorium and Web Conferencing Procedings of the "2013 Special Integrated Safety...

410

How to Integrate Climate Change Adaptation into National-Level...  

Open Energy Info (EERE)

How to Integrate Climate Change Adaptation into National-Level Policy and Planning in the Water Sector Jump to: navigation, search Tool Summary Name: How to Integrate Climate...

411

Integrated Dynamic Electron Solutions, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Dynamic Electron Solutions, Inc. America's Next Top Energy Innovator Challenge 333 likes Integrated Dynamic Electron Solutions, Inc. Lawrence Livermore National...

412

T-686: IBM Tivoli Integrated Portal Java Double Literal Denial...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

686: IBM Tivoli Integrated Portal Java Double Literal Denial of Service Vulnerability T-686: IBM Tivoli Integrated Portal Java Double Literal Denial of Service Vulnerability August...

413

A Framework for the Optimization of Integrated Energy Systems...  

Open Energy Info (EERE)

A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15...

414

Utility Wind Integration Group Distributed Wind/Solar Interconnection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Wind Integration Group Distributed WindSolar Interconnection Workshop Utility Wind Integration Group Distributed WindSolar Interconnection Workshop May 21, 2013 8:00AM...

415

BECHTEL JACOBS COMPANY LLC'S MANAGEMENT AND INTEGRATION CONTRACT...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here Home BECHTEL JACOBS COMPANY LLC'S MANAGEMENT AND INTEGRATION CONTRACT AT OAK RIDGE, IG-0498 BECHTEL JACOBS COMPANY LLC'S MANAGEMENT AND INTEGRATION CONTRACT AT OAK...

416

Salt Stress in Desulfovibrio vulgaris Hildenborough: An integrated genomics approach  

E-Print Network (OSTI)

2002. Integrating cancer genomics and proteomics in theWeb site for comparative genomics. Genome Res 15:1015-22.Hildenborough: An integrated genomics approach. Aindrila

Mukhopadhyay, Aindrila

2010-01-01T23:59:59.000Z

417

Eastern Wind Integration and Transmission Study -- Preliminary Findings: Preprint  

Science Conference Proceedings (OSTI)

This paper reviews the Eastern Wind Integration and Transmission Study, the development of wind datasets, the transmission analysis, and the results of wind integration analysis for four scenarios.

Corbus, D.; Milligan, M.; Ela, E.; Schuerger, M.; Zavadil, B.

2009-09-01T23:59:59.000Z

418

Guide to Integrating Renewable Energy in Federal Construction...  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Commissioning on Facebook Tweet about Guide to Integrating Renewable Energy...

419

Role of Large Balancing Areas In Integrating Solar Generation: Solar Integration Series. 3 of 3 (Brochure)  

DOE Green Energy (OSTI)

The third out of a series of three fact sheets describing the role of large balancing areas in integrating solar generation.

Not Available

2011-05-01T23:59:59.000Z

420

Pipeline integrity programs help optimize resources  

SciTech Connect

Natural Gas Pipeline Co. of America has developed an integrity program. NGPL operates approximately 13,000 miles of large-diameter parallel gas pipelines, which extend from traditional supply areas to the Chicago area. Line Number 1, the 24-in. Amarillo-to-Chicago mainline, was built in 1931, and parts of it are still in operation today. More than 85% of the NGPL systems is more than 25 years old, and continues to provide very reliable service. The company operated for many years with specialized crews dedicated to pipeline systems, and a corrosion department. Under this organization, employees developed an intimate knowledge of the pipeline and related integrity issues. NGPL relied on this knowledge to develop its integrity program. The risk assessment program is a very valuable tool for identifying areas that may need remedial work. However, it is composed of many subjective evaluations and cannot predict failure nor ensure good performance. The program is an excellent data management tool that enables a pipeline operator to combine all available information needed to make integrity decisions. The integrity of a pipeline is continually changing, and any program should be updated on a regular basis.

Dusek, P.J. (Natural Gas Pipeline Co. of America, Lombard, IL (United States))

1994-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Development of an Integrated Distribution Management System  

Science Conference Proceedings (OSTI)

This final report details the components, functionality, costs, schedule and benefits of developing an Integrated Distribution Management System (IDMS) for power distribution system operation. The Distribution Automation (DA) and Supervisory Control and Data Acquisition (SCADA) systems used by electric power companies to manage the distribution of electric power to retail energy consumers are vital components of the Nation’s critical infrastructure. Providing electricity is an essential public service and a disruption in that service, if not quickly restored, could threaten the public safety and the Nation’s economic security. Our Nation’s economic prosperity and quality of life have long depended on the essential services that utilities provide; therefore, it is necessary to ensure that electric utilities are able to conduct their operations safely and efficiently. A fully integrated technology of applications is needed to link various remote sensing, communications and control devices with other information tools that help guide Power Distribution Operations personnel. A fully implemented IDMS will provide this, a seamlessly integrated set of applications to raise electric system operating intelligence. IDMS will enhance DA and SCADA through integration of applications such as Geographic Information Systems, Outage Management Systems, Switching Management and Analysis, Operator Training Simulator, and other Advanced Applications, including unbalanced load flow and fault isolation/service restoration. These apps are capable of utilizing and obtaining information from appropriately installed DER, and by integrating disparate systems, the Distribution Operators will benefit from advanced capabilities when analyzing, controlling and operating the electric system.

Schatz, Joe E.

2010-10-20T23:59:59.000Z

422

Identifying discriminating variables between teachers who fully integrate computers and teachers with limited integration  

Science Conference Proceedings (OSTI)

Given the prevalence of computers in education today, it is critical to understand teachers' perspectives regarding computer integration in their classrooms. The current study surveyed a random sample of a heterogeneous group of 185 elementary and 204 ... Keywords: Computer integration, Computer technology, Computers, Computers in classrooms, Elementary and secondary teachers, Teacher Characteristics, Teachers

Julie Mueller; Eileen Wood; Teena Willoughby; Craig Ross; Jacqueline Specht

2008-12-01T23:59:59.000Z

423

An integrated media, integrated processes watershed model Gour-Tsyh Yeh a,  

E-Print Network (OSTI)

An integrated media, integrated processes watershed model Gour-Tsyh Yeh a, , Don-Sin Shih b , Jing modelling Groundwater and surface water coupling High performance parallel computing River hydraulics of a numerical model simulating fluid flow in WAterSHed Systems of 1D Stream-River Networks, 2D Overland Regime

Central Florida, University of

424

Integrated demonstrations, integrated programs, and special programs within DOE`s Office of Technology Development  

SciTech Connect

This poster session presents information on integrated demonstrations, integrated programs, and special programs within the EM Office of Technology Development that will accelerate cleanup of sites within the Nuclear Weapons Complex. Presented topics include: Volatile organic compounds in soils and ground water, uranium in soils, underground storage tanks, mixed waste landfills, decontamination and decommissioning, in situ remediation, and separations technology.

Peterson, M.E.; Frank, C.; Stein, S.; Steele, J.

1994-08-01T23:59:59.000Z

425

PRIVACY IMPACT ASSESSMENT: Integrated Safety Management Workshop  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Integrated Safety Management Workshop Registration PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT Date Departmental Element&·Slte 16/Jun/09 Idaho National Laboratory Engineering Research Office Building (EROB) Name of-Information System or IT Project Integrated Safety Management Workshop Registration Exhibit Project UID 207765 NewPIA D Update 0 DOE PIA - ISMS Workshop Finallxw.doc N T "tl I

426

Energy Systems Integration | OpenEI Community  

Open Energy Info (EERE)

Literature Review Literature Review Type Term Title Author Replies Last Post sort icon Document Literature Review A Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Qinsun 15 Nov 2012 - 13:19 Document Literature Review Energy System Integration(Smith 2001) Qinsun 15 Nov 2012 - 13:09 Document Literature Review Integrated Energy Systems (IES) for Buildings: A Market Assessment(LeMar 2002) Qinsun 15 Nov 2012 - 13:05 Document Literature Review Optimal Power Flow of Multiple Energy Carriers(Geidl and Andersson 2007) Qinsun 15 Nov 2012 - 13:04 Document Literature Review Energy Forms or Energy Carriers(G, Herrmann et al. 1983) Qinsun 15 Nov 2012 - 10:28 Groups Menu You must login in order to post into this group.

427

Thermal integration of processes to recover helium  

SciTech Connect

New applications for helium have resulted in significant growth in helium demand in recent years. The primary source of helium in the USA is natural gas reservoirs. Typically natural gas reservoirs that contain helium also contain nitrogen. The presence of nitrogen requires that the heating value of the gas be upgraded using nitrogen rejection units (NRU). Thermal integration of the NRU process with the helium recovery process is described. Further integration of NRU and helium recovery process to produce cold helium gas suitable for use as a feed to a helium liquefier is also described. A key aspect of the integrated process is the use of refrigeration from the NRU to reduce power requirements, and capital cost for the helium recovery process.

Pahade, R.F.; Maloney, J.J.; Fisher, T.F. (Union Carbide Corp., Linde Div., Tonawanda, NY (US))

1988-01-01T23:59:59.000Z

428

Energy Systems Integration: A Convergence of Ideas  

Open Energy Info (EERE)

Integration Integration A Convergence of Ideas July 2012 Ben Kroposki, Bobi Garrett, Stuart Macmillan, Brent Rice, and Connie Komomua National Renewable Energy Laboratory Mark O'Malley University College Dublin Dan Zimmerle Colorado State University NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. 1 Energy Systems Integration A Convergence of Ideas Benjamin Kroposki, Bobi Garrett, Stuart Macmillan, Brent Rice, Connie Komomua National Renewable Energy Laboratory Mark O'Malley University College Dublin Dan Zimmerle Colorado State University Prepared under Task No. 2940.5017 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency

429

Need for an Integrated Risk Model  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Need for An Integrated Risk Need for An Integrated Risk Model Michael Salmon, LANL Voice: 505-665-7244 Fax: 505-665-2897 salmon@lanl.gov 10/22/2008 p. 2, LA-UR 11-06023 Purpose * To highlight some observations on safety strategy when concerned with NPH * To encourage discussion and collaboration on the use of an integrated risk model at sites * To propose a test case for use of a sample case 10/22/2008 p. 3, LA-UR 11-06023 Observations * SAFER Comments of Peer Reviewers - There is a need to consider operator interaction - What about fire following earthquake? - What about flood following earthquake? - lessons from kashiwazake * Sites do not consider common cause initiating events * Investment decisions are not based on quantitative estimates of risk reduction 10/22/2008 p. 4, LA-UR 11-06023

430

Integrated Energy Systems | Open Energy Information  

Open Energy Info (EERE)

Integrated Energy Systems Integrated Energy Systems Jump to: navigation, search Name Integrated Energy Systems Address 747 N Main Street Place Orange, California Zip 92868 Sector Solar Product EPC Year founded 1985 Number of employees 51-200 Phone number 714-771-9098 Website http://ie-systems.net/ Coordinates 33.799624°, -117.86553° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.799624,"lon":-117.86553,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

431

Living Labs of Electric Vehicle Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Living Labs of Electric Vehicle Integration Living Labs of Electric Vehicle Integration Speaker(s): Johan Driesen Date: May 11, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Chris Marnay Electric vehicles and plug-in hybrid vehicles are key to making transportation sustainable and climate change neutral. This talk will focus on the electricity grid integration aspects of wide-scale charging infrastructure: the impact on generation capacity, transmission and distribution are dealt with through measurements, modeling and scenario simulations. The advantages and problems of the possible business models to pay for the charging are discussed. Alternative charging and grid-coupling technology (e.g. wireless inductive charging) is considered. The relationship with the transition towards "smart cities" is discussed. In

432

Fermilab Leadership Institute Integrating Internet, Instruction and  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab Leadership Institute Integrating Fermilab Leadership Institute Integrating Internet, Instruction and Curriculum Online Materials Projects ACT Program Information Example ACT Class Page Example LInC Class Page Please sign up here to be notified of future LInC program opportunities. Fermilab LInC Online is creating a cadre of educational leaders who effectively integrate technology in their classrooms to support engaged learning student investigations on real-world issues. Participants range from classroom teachers and technology coordinators through library media specialists, who create engaged learning projects that incorporate the best uses of technology. The new Fermilab LInC ACT course guides teachers through the process of evaluating, selecting and customizing an inquiry-based online project to

433

Fuel Pathway Integration Technical Team Roadmap  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Pathway Integration Fuel Pathway Integration Technical Team Roadmap June 2013 This roadmap is a document of the U.S. DRIVE Partnership. U.S. DRIVE (Driving Research and Innovation for Vehicle efficiency and Energy sustainability) is a voluntary, non-binding, and nonlegal partnership among the U.S. Department of Energy; USCAR, representing Chrysler Group LLC, Ford Motor Company, and General Motors; Tesla Motors; five energy companies - BP America, Chevron Corporation, Phillips 66 Company, ExxonMobil Corporation, and Shell Oil Products US; two utilities - Southern California Edison and DTE Energy; and the Electric Power Research Institute (EPRI). The Fuel Pathway Integration Technical Team is one of 12 U.S. DRIVE technical teams ("tech teams") whose mission is to accelerate the development of pre-competitive and innovative technologies to enable

434

Integration Of Safety Into The Design Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STD-1189-2008 STD-1189-2008 March 2008 DOE STANDARD INTEGRATION OF SAFETY INTO THE DESIGN PROCESS U.S. Department of Energy AREA SAFT Washington, DC 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1189-2008 Page ii This document is available on the Department of Energy Technical Standards Program Web Page at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-STD-1189-2008 Page iii PREFACE The U.S. Department of Energy (DOE) has approved this Standard for use by DOE and its contractors. In a memorandum to DOE elements, dated December 5, 2005, on integration of Safety-in- Design, the Deputy Secretary of Energy stated, "I expect safety to be fully integrated into design early in the project. Specifically, by the start of the preliminary design, I expect a hazard

435

Package for integrated optic circuit and method  

DOE Patents (OSTI)

A structure and method for packaging an integrated optic circuit. The package comprises a first wall having a plurality of microlenses formed therein to establish channels of optical communication with an integrated optic circuit within the package. A first registration pattern is provided on an inside surface of one of the walls of the package for alignment and attachment of the integrated optic circuit. The package in one embodiment may further comprise a fiber holder for aligning and attaching a plurality of optical fibers to the package and extending the channels of optical communication to the fibers outside the package. In another embodiment, a fiber holder may be used to hold the fibers and align the fibers to the package. The fiber holder may be detachably connected to the package.

Kravitz, Stanley H. (26 Aspen Rd., Placitas, NM 87043); Hadley, G. Ronald (6012 Annapolis NE., Albuquerque, NM 87111); Warren, Mial E. (3825 Mary Ellen NE., Albuquerque, NM 87111); Carson, Richard F. (1036 Jewel Pl. NE., Albuquerque, NM 87123); Armendariz, Marcelino G. (1023 Oro Real NE., Albuquerque, NM 87123)

1998-01-01T23:59:59.000Z

436

Package for integrated optic circuit and method  

DOE Patents (OSTI)

A structure and method are disclosed for packaging an integrated optic circuit. The package comprises a first wall having a plurality of microlenses formed therein to establish channels of optical communication with an integrated optic circuit within the package. A first registration pattern is provided on an inside surface of one of the walls of the package for alignment and attachment of the integrated optic circuit. The package in one embodiment may further comprise a fiber holder for aligning and attaching a plurality of optical fibers to the package and extending the channels of optical communication to the fibers outside the package. In another embodiment, a fiber holder may be used to hold the fibers and align the fibers to the package. The fiber holder may be detachably connected to the package. 6 figs.

Kravitz, S.H.; Hadley, G.R.; Warren, M.E.; Carson, R.F.; Armendariz, M.G.

1998-08-04T23:59:59.000Z

437

Reusable vibration resistant integrated circuit mounting socket  

DOE Patents (OSTI)

This invention discloses a novel form of socket for integrated circuits to be mounted on printed circuit boards. The socket uses a novel contact which is fabricated out of a bimetallic strip with a shape which makes the end of the strip move laterally as temperature changes. The end of the strip forms a barb which digs into an integrated circuit lead at normal temperatures and holds it firmly in the contact, preventing loosening and open circuits from vibration. By cooling the contact containing the bimetallic strip the barb end can be made to release so that the integrated circuit lead can be removed from the socket without damage either to the lead or to the socket components.

Evans, Craig N. (Irwin, PA)

1995-01-01T23:59:59.000Z

438

Coal Integrated Gasification Fuel Cell System Study  

DOE Green Energy (OSTI)

This study analyzes the performance and economics of power generation systems based on Solid Oxide Fuel Cell (SOFC) technology and fueled by gasified coal. System concepts that integrate a coal gasifier with a SOFC, a gas turbine, and a steam turbine were developed and analyzed for plant sizes in excess of 200 MW. Two alternative integration configurations were selected with projected system efficiency of over 53% on a HHV basis, or about 10 percentage points higher than that of the state-of-the-art Integrated Gasification Combined Cycle (IGCC) systems. The initial cost of both selected configurations was found to be comparable with the IGCC system costs at approximately $1700/kW. An absorption-based CO2 isolation scheme was developed, and its penalty on the system performance and cost was estimated to be less approximately 2.7% and $370/kW. Technology gaps and required engineering development efforts were identified and evaluated.

Chellappa Balan; Debashis Dey; Sukru-Alper Eker; Max Peter; Pavel Sokolov; Greg Wotzak

2004-01-31T23:59:59.000Z

439

Backlund Transformations for Darboux Integrable Differential Systems  

E-Print Network (OSTI)

We give a new mechanism for constructing Backlund transformations by using symmetry reduction of differential systems. We then characterize a family of Backlund transformations between Darboux integrable systems where the Backlund transformation can be constructed by the proposed symmetry reduction method. It is then shown that the well-known Backlund transformations between Darboux integrable Monge-Ampere systems can all be constructed using group quotients. A simple group theoretical argument leads to a non-existence result for Backlund transformations which disagrees with Theorem 1 in arXiv:0707.4408v2. A variety of examples are given.

Anderson, Ian M

2011-01-01T23:59:59.000Z

440

7.0 - Integrated Acquisition Planning Process  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 (August 2006) 0 (August 2006) 1 INTEGRATING ACQUISITION PLANNING PROCESSES - AN OVERVIEW REFERENCES 1. FAR Part 7 Acquisition Planning 2. FAR Part 34 Major System Acquisition 3. Acquisition Letter 2005-08R, Small Business Programs 4. Acquisition Guide Chapter 7.1, Acquisition Planning 5. Acquisition Guide Chapter 42.5, Contract Management Planning 6. DOE O 580.1 Department of Energy Property Management Program 7. DOE O 413.3 Program and Project Management for the Acquisition of Capital Assets Guiding Principles n Acquisition planning benefits from integrating independent planning processes and a team approach that includes appropriate representation

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

NREL: Transmission Grid Integration - Research Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Staff Research Staff NREL's transmission grid integration research staff work to incorporate renewable energy into the transmission system primarily through NREL's Power Systems Engineering Center. Photo of Barbara O'Neill Barbara O'Neill, Transmission and Grid Integration Group Manager M.S., Energy Management and Policy, University of Pennsylvania Engineering Diploma, Petroleum Economics and Management, French Institute of Petroleum B.S., Electrical Engineering, Pratt Institute Barbara has a diverse background with expertise in such fields as wind and solar project development, energy forecasting, renewable energy power purchase agreements, interconnection issues, market structures, and stakeholder engagement. Barbara currently manages the Transmission and Grid

442

NREL: Process Development and Integration Laboratory - Atmospheric  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric Processing Platform Capabilities Atmospheric Processing Platform Capabilities The Atmospheric Processing platform in the Process Development and Integration Laboratory offers powerful capabilities with integrated tools for depositing, processing, and characterizing photovoltaic materials and devices. In particular, this platform focuses on different methods to deposit ("write") materials onto a variety of substrates and then further process into optoelectronic materials using rapid thermal processing. You can read more on the rationale for developing this platform and its capabilities. Contact Maikel van Hest for more details on these capabilities. The Atmospheric Processing platform will allow deposition in any sequence and is applicable to activities in all Technology Roadmaps, which include

443

Integrated injection-locked semiconductor diode laser  

DOE Patents (OSTI)

A continuous wave integrated injection-locked high-power diode laser array is provided with an on-chip independently-controlled master laser. The integrated injection locked high-power diode laser array is capable of continuous wave lasing in a single near-diffraction limited output beam at single-facet power levels up to 125 mW (250 mW total). Electronic steering of the array emission over an angle of 0.5 degrees is obtained by varying current to the master laser. The master laser injects a laser beam into the slave array by reflection of a rear facet. 18 figures.

Hadley, G.R.; Hohimer, J.P.; Owyoung, A.

1991-02-19T23:59:59.000Z

444

Integrated test vehicle program plan: revision C  

DOE Green Energy (OSTI)

This edition dated August 26, 1977, is Revision C of the Integrated Test Vehicle, Program Plan, Phase II - Deliverable Item 2-7-1. The original edition was issued on May 27, 1977. Corrections were made and issued as Proposed Modifications for Integrated Test Vehicle, Program Plan, dated July 8, 1977. For the purpose of documenting changes, the July 8, 1977, version is caled Revision A. The edition dated August 5, 1977, is called Revision B. Each paragraph in this edition is marked to indicate technical changes from previous editions.

Not Available

1977-08-26T23:59:59.000Z

445

PRECISION INTEGRATOR FOR MINUTE ELECTRIC CURRENTS  

DOE Patents (OSTI)

An integrator is described for measuring the value of integrated minute electrical currents. The device consists of a source capacitor connected in series with the source of such electrical currents, a second capacitor of accurately known capacitance and a source of accurately known and constant potential, means responsive to the potentials developed across the source capacitor for reversibly connecting the second capacitor in series with the source of known potential and with the source capacitor and at a rate proportional to the potential across the source capacitor to maintain the magnitude of the potential across the source capacitor at approximately zero. (AEC)

Hemmendinger, A.; Helmer, R.J.

1961-10-24T23:59:59.000Z

446

Three wafer stacking for 3D integration.  

SciTech Connect

Vertical wafer stacking will enable a wide variety of new system architectures by enabling the integration of dissimilar technologies in one small form factor package. With this LDRD, we explored the combination of processes and integration techniques required to achieve stacking of three or more layers. The specific topics that we investigated include design and layout of a reticle set for use as a process development vehicle, through silicon via formation, bonding media, wafer thinning, dielectric deposition for via isolation on the wafer backside, and pad formation.

Greth, K. Douglas; Ford, Christine L.; Lantz, Jeffrey W.; Shinde, Subhash L.; Timon, Robert P.; Bauer, Todd M.; Hetherington, Dale Laird; Sanchez, Carlos Anthony

2011-11-01T23:59:59.000Z

447

Integrated injection-locked semiconductor diode laser  

DOE Patents (OSTI)

A continuous wave integrated injection-locked high-power diode laser array is provided with an on-chip independently-controlled master laser. The integrated injection locked high-power diode laser array is capable of continuous wave lasing in a single near-diffraction limited output beam at single-facet power levels up to 125 mW (250 mW total). Electronic steering of the array emission over an angle of 0.5 degrees is obtained by varying current to the master laser. The master laser injects a laser beam into the slave array by reflection of a rear facet.

Hadley, G. Ronald (Albuquerque, NM); Hohimer, John P. (Albuquerque, NM); Owyoung, Adelbert (Albuquerque, NM)

1991-01-01T23:59:59.000Z

448

Gamma-Ray Bursts observed by INTEGRAL  

E-Print Network (OSTI)

During the first six months of operations, six Gamma Ray Bursts (GRBs) have been detected in the field of view of the INTEGRAL instruments and localized by the INTEGRAL Burst Alert System (IBAS): a software for the automatic search of GRBs and the rapid distribution of their coordinates. I describe the current performances of IBAS and review the main results obtained so far. The coordinates of the latest burst localized by IBAS, GRB 031203, have been distributed within 20 s from the burst onset and with an uncertainty radius of only 2.7 arcmin.

S. Mereghetti

2003-12-12T23:59:59.000Z

449

Integrated fuses for OLED lighting device  

DOE Patents (OSTI)

An embodiment of the present invention pertains to an electroluminescent lighting device for area illumination. The lighting device is fault tolerant due, in part, to the patterning of one or both of the electrodes into strips, and each of one or more of these strips has a fuse formed on it. The fuses are integrated on the substrate. By using the integrated fuses, the number of external contacts that are used is minimized. The fuse material is deposited using one of the deposition techniques that is used to deposit the thin layers of the electroluminescent lighting device.

Pschenitzka, Florian (San Jose, CA)

2007-07-10T23:59:59.000Z

450

Energy Systems Integration: A Convergence of Ideas  

SciTech Connect

Energy systems integration (ESI) enables the effective analysis, design, and control of these interactions and interdependencies along technical, economic, regulatory, and social dimensions. By focusing on the optimization of energy from all systems, across all pathways, and at all scales, we can better understand and make use of the co-benefits that result to increase reliability and performance, reduce cost, and minimize environmental impacts. This white paper discusses systems integration and the research in new control architectures that are optimized at smaller scales but can be aggregated to optimize energy systems at any scale and would allow replicable energy solutions across boundaries of existing and new energy pathways.

Kroposki, B.; Garrett, B.; MacMillan, S.; Rice, B.; Komomua, C.; O'Malley, M.; Zimmerle, D.

2012-07-01T23:59:59.000Z

451

Integrating Variable Renewable Energy: Challenges and Solutions  

SciTech Connect

In the U.S., a number of utilities are adopting higher penetrations of renewables, driven in part by state policies. While power systems have been designed to handle the variable nature of loads, the additional supply-side variability and uncertainty can pose new challenges for utilities and system operators. However, a variety of operational and technical solutions exist to help integrate higher penetrations of wind and solar generation. This paper explores renewable energy integration challenges and mitigation strategies that have been implemented in the U.S. and internationally, including forecasting, demand response, flexible generation, larger balancing areas or balancing area cooperation, and operational practices such as fast scheduling and dispatch.

Bird, L.; Milligan, M.; Lew, D.

2013-09-01T23:59:59.000Z

452

High Efficiency Solar Integrated Roof Membrane Product  

SciTech Connect

This project was designed to address the Solar Energy Technology Program objective, to develop new methods to integrate photovoltaic (PV) cells or modules within a building-integrated photovoltaic (BIPV) application that will result in lower installed cost as well as higher efficiencies of the encapsulated/embedded PV module. The technology assessment and development focused on the evaluation and identification of manufacturing technologies and equipment capable of producing such low-cost, high-efficiency, flexible BIPV solar cells on single-ply roofing membranes.

Partyka, Eric; Shenoy, Anil

2013-05-15T23:59:59.000Z

453

SUBSURFACE REPOSITORY INTEGRATED CONTROL SYSTEM DESIGN  

Science Conference Proceedings (OSTI)

The purpose of this document is to develop preliminary high-level functional and physical control system architectures for the proposed subsurface repository at Yucca Mountain. This document outlines overall control system concepts that encompass and integrate the many diverse systems being considered for use within the subsurface repository. This document presents integrated design concepts for monitoring and controlling the diverse set of subsurface operations. The subsurface repository design will be composed of a series of diverse systems that will be integrated to accomplish a set of overall functions and objectives. The subsurface repository contains several Instrumentation and Control (I&C) related systems including: waste emplacement systems, ventilation systems, communication systems, radiation monitoring systems, rail transportation systems, ground control monitoring systems, utility monitoring systems (electrical, lighting, water, compressed air, etc.), fire detection and protection systems, retrieval systems, and performance confirmation systems. Each of these systems involve some level of I&C and will typically be integrated over a data communication network. The subsurface I&C systems will also integrate with multiple surface-based site-wide systems such as emergency response, health physics, security and safeguards, communications, utilities and others. The scope and primary objectives of this analysis are to: (1) Identify preliminary system level functions and interface needs (Presented in the functional diagrams in Section 7.2). (2) Examine the overall system complexity and determine how and on what levels these control systems will be controlled and integrated (Presented in Section 7.2). (3) Develop a preliminary subsurface facility-wide design for an overall control system architecture, and depict this design by a series of control system functional block diagrams (Presented in Section 7.2). (4) Develop a series of physical architectures that present preliminary concepts for integrating the diverse set of control systems to be used within the subsurface repository facility (Presented in Section 7.3). (5) Develop initial concepts for an overall subsurface data communication system that can be used to integrate critical and data-intensive control systems (Presented in Section 7.4). (6) Discuss technology trends and control system design issues (Presented in Section 7.5).

C.J. Fernado

1998-09-17T23:59:59.000Z

454

Effects of Enterprise Interoperability on Integration Efforts in Supply Chains  

Science Conference Proceedings (OSTI)

Despite their business value and return on investment, multi-enterprise integration projects are unbearably costly for many companies. With a view to realizing lower integration costs and resources, enterprises are seeking partner attributes that display ... Keywords: B2b Integration, Integration Effort, Interoperability, Interorganizational Systems

Spiros Mouzakitis; Aikaterini-Maria Sourouni; Dimitris Askounis

2009-12-01T23:59:59.000Z

455

Computer integrated construction: recent developments and future directions  

Science Conference Proceedings (OSTI)

This paper gives an overview of research undertaken within the area of Computer Integrated Construction (CIC) with particular reference to project integrated databases. Recent developments are highlighted and future directions are discussed. The paper ... Keywords: GALLICON, IFC, OSCON, WISPER, integrated construction environments, integration

G. Aouad; M. Sun; I. Faraj

2001-01-01T23:59:59.000Z

456

Building Technologies Office: About the Commercial Buildings Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Commercial About the Commercial Buildings Integration Program to someone by E-mail Share Building Technologies Office: About the Commercial Buildings Integration Program on Facebook Tweet about Building Technologies Office: About the Commercial Buildings Integration Program on Twitter Bookmark Building Technologies Office: About the Commercial Buildings Integration Program on Google Bookmark Building Technologies Office: About the Commercial Buildings Integration Program on Delicious Rank Building Technologies Office: About the Commercial Buildings Integration Program on Digg Find More places to share Building Technologies Office: About the Commercial Buildings Integration Program on AddThis.com... About Take Action to Save Energy Activities Partner with DOE Commercial Buildings Resource Database

457

Fermilab | Directorate | Office of Integrated Planning & Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Integrated Planning & Performance Management (IPPM) Office of Integrated Planning & Performance Management (IPPM) Integrated Planning Diagram Integrated Planning Diagram [Download PPT] Mission: The Office of Integrated Planning and Performance Management (IPPM) within the Fermilab Directorate provides systems and management processes for institutional planning and performance assessment and evaluation. The office of IPPM leads multi-year, forward-looking planning and integration of institutional plans, programs, projects, operations and budgets. In addition it develops, implements and maintains integrated laboratory systems and management processes for strategic planning and goal setting, project and program oversight, enterprise risk management and performance planning and oversight. IPPM Facilitates:

458

Center for Integrated Nanotechnologies 2011 Annual Report  

Science Conference Proceedings (OSTI)

We are pleased to share with you this 2011 edition of the Annual Report from the Center for Integrated Nanotechnologies (CINT) and the growing excitement we feel around cementing our brand as a leader in integration nanoscience. This can be seen most readily in the momentum we have achieved in our signature Integration Focus Activities (IFAs). These efforts unite our scientists across our four scientific Thrust areas with our users to concentrate research on larger-scale nanoscience integration challenges for specific classes of nanomaterials, systems, and phenomena. All three of our current IFAs (p. 10) now have a full head of steam, and nearly 30% of our current user projects map in some meaningful way to one of these IFAs. As part of our redoubled effort to increase our industrial user base, we are also looking to leverage these IFAs to build a stronger link to and spur recruitment within our industrial user community. We believe that the IFAs are a natural community-building tool with an intrinsic value proposition for industry; an R&D pipeline that can lead to more mature, more commercially well-positioned technologies. Finally, as nanoscience and nanotechnology are maturing, we as a research community are beginning to see our efforts extend in many exciting new directions. Our focus on nanoscience integration positions us very well to capitalize on new opportunities including the emerging Mesoscale Initiative within the DOE Office of Science. Many aspects of mesoscale science are embodied in the integration of nanoscale building blocks. We are equally proud of our continuing strong performance in support of our user program. We have fully transitioned to our new user proposal database providing enhanced convenience and flexibility for proposal submission and review. In our two regular proposal calls this year we received a total of 225 proposals, an increase of 10% over our 2010 performance. Our official count on number of users for the period remains at {approx}350 and continues to reflect full engagement of our scientific staff. We are also seeing a steady increase in our industrial user base, with the number of industrial proposals (including Rapid Access proposals) doubling in 2011. We attribute this in part of our outreach efforts including our focused industrial session in each of our past two annual User Conferences. The Center for Integrated Nanotechnologies (CINT) is a Department of Energy/Office of Science Nanoscale Science Research Center (NSRC) operating as a national user facility devoted to establishing the scientific principles that govern the design, performance, and integration of nanoscale materials. Jointly operated by Los Alamos and Sandia National Laboratories, CINT explores the continuum from scientific discovery to use-inspired research, with a focus on the integration of nanoscale materials and structures to achieve new properties and performance and their incorporation into the micro- and macro worlds. Through its Core Facility at Sandia National Laboratories and its Gateway Facility at Los Alamos National Laboratory, CINT provides open access to tools and expertise needed to explore the continuum from scientific discovery to the integration of nanostructures into the micro- and macro worlds. In its overall operations, CINT strives to achieve the following goals common to all Nanoscale Science Research Centers: (1) Conduct forefront research in nanoscale science; (2) Operate as a user facility for scientific research; (3) Provide user access to the relevant BES-supported expertise and capabilities at the host national laboratory; and (4) Leverage other relevant national laboratory capabilities to enhance scientific opportunities for the nanoscience user community. These additional goals are specific to the unique CINT mission: (5) Establish and lead a scientific community dedicated to solving nanoscale science integration challenges; and (6) Create a single user facility program that combines expertise and facilities at both Los Alamos and Sandia National Laboratories. The CINT user pro

Sanders, Antonya [Los Alamos National Laboratory

2012-06-21T23:59:59.000Z

459

Integrating State and Federal Environmental Reviews  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NEPA and CEQA: Integrating State and Federal Environmental Reviews Draft for Public Review and Comment March 2013 2 Table of Contents: I. Introduction ...................................................................................................................................... 3 II. Questions and Answers .................................................................................................................... 5 A. Stage 1: Preliminary Questions ................................................................................................. 5 1. How Does NEPA and CEQA Terminology Differ? .................................................... 5 a. "Action" (NEPA) versus "Project" (CEQA) ................................................ 5

460

Reciprocal transformations and deformations of integrable hierarchies  

E-Print Network (OSTI)

We present changes of variables that transform new integrable hierarchies found by Szablikowski and B{\\l}aszak using the $R$-matrix deformation technique [J. Math. Phys. 47 (2006), paper 043505, nlin.SI/0501044] into known Harry-Dym-type and mKdV-type hierarchies.

A. Sergyeyev

2008-12-30T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Integrated Energy and Greenhouse Gas Management System  

E-Print Network (OSTI)

With Climate Change legislation on the horizon, the need to integrate energy reduction initiatives with greenhouse gas reduction efforts is critical to manufactures competitiveness and financial strength going forward. MPC has developed an integrated Energy and Greenhouse Gas Management System that allows companies to reduce energy and carbon intensity at the same time all the while bolstering bottom line performance. Reducing energy use and greenhouse gases is not an option but a necessity today. All manufacturing companies need to develop in-house capabilities to manage these important resources or pay the price of high carbon taxes and/or face a depletion in operating margins. MPC will present a case history highlighting the steps taken, the results obtained and the lessons learned in developing an integrated Energy and Greenhouse Gas Management System with a major industrial manufacturing company in the Midwest. Key subject areas covered include: Integration of Climate Change and Energy Management Strategies- a winning approach to meet the challenge; Turn a potential cost of compliance into a new cash flow source; Leveraging Energy Management Systems to optimize savings; Navigating through the new Greenhouse Gas reporting requirements; Utilizing Plant and Corporate Energy Management Dashboards to Control Energy Consumption and Greenhouse Gas emissions.

Spates, C. N.

2010-01-01T23:59:59.000Z

462

Integrated Energy Solutions LLC | Open Energy Information  

Open Energy Info (EERE)

Integrated Energy Solutions LLC Integrated Energy Solutions LLC Jump to: navigation, search Logo: Integrated Energy Solutions LLC Name Integrated Energy Solutions LLC Address 11900 College Blvd, Ste 210 Place Overland Park, Kansas Zip 66210-3939 Product Bio-Coal TM Technology Year founded 2009 Number of employees 1-10 Phone number +1 913 231 2942 Website http://www.inensol.com Coordinates 38.928082°, -94.7242° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.928082,"lon":-94.7242,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

463

Retrofitting analysis of integrated bio-refineries  

E-Print Network (OSTI)

A bio-refinery is a processing facility that produces liquid transportation fuels and/or value-added chemicals and other products. Because of the dwindling resources and escalating prices of fossil fuels, there are emerging situations in which the economic performance of fossil-based facilities can be enhanced by retrofitting and incorporation of bio-mass feedstocks. These systems can be regarded as bio-refineries or integrated fossilbio- refineries. This work presents a retrofitting analysis to integrated bio-refineries. Focus is given to the problem of process modification to an existing plant by considering capacity expansion and material substitution with biomass feedstocks. Process integration studies were conducted to determine cost-effective strategies for enhancing production and for incorporating biomass into the process. Energy and mass integration approaches were used to induce synergism and to reduce cost by exchanging heat, material utilities, and by sharing equipment. Cost-benefit analysis was used to guide the decision-making process and to compare various production routes. Ethanol production from two routes was used as a case study to illustrate the applicability of the proposed approach and the results were bio-refinery has become more attractive then fossil-refinery.

Cormier, Benjamin R.

2005-12-01T23:59:59.000Z

464

Fuel cell integrated with steam reformer  

DOE Patents (OSTI)

A H.sub.2 -air fuel cell integrated with a steam reformer is disclosed wherein a superheated water/methanol mixture is fed to a catalytic reformer to provide a continuous supply of hydrogen to the fuel cell, the gases exhausted from the anode of the fuel cell providing the thermal energy, via combustion, for superheating the water/methanol mixture.

Beshty, Bahjat S. (Lower Makefield, PA); Whelan, James A. (Bricktown, NJ)

1987-01-01T23:59:59.000Z

465

Generalized Integrability and two-dimensional Gravitation  

E-Print Network (OSTI)

We review the construction of generalized integrable hierarchies of partial differential equations, associated to affine Kac-Moody algebras, that include those considered by Drinfel'd and Sokolov. These hierarchies can be used to construct new models of 2D quantum or topological gravity, as well as new $\\cal W$-algebras.

T. Hollowood; J. L. Miramontes; J. Sanchez Guillen

1992-10-12T23:59:59.000Z

466

Distributed Photovoltaics: Utility Integration Issues and Opportunities  

Science Conference Proceedings (OSTI)

This white paper addresses industry involvement in distributed photovoltaic (PV) deployment and integration from a technical and business perspective. It considers evolving PV system technologies and markets, introduces distributed PV applications and initiatives being implemented by utilities and other industry participants, and identifies critical issues and opportunities facing the U.S. electric sector.

2008-08-29T23:59:59.000Z

467

Hedging and Vertical Integration in Electricity Markets  

Science Conference Proceedings (OSTI)

This paper analyzes the interactions between competitive (wholesale) spot, retail, and forward markets and vertical integration in electricity markets. We develop an equilibrium model with producers, retailers, and traders to study and quantify the impact ... Keywords: asset pricing, corporate finance, electric--electronic, financial institutions, industries, markets

René Aïd; Gilles Chemla; Arnaud Porchet; Nizar Touzi

2011-08-01T23:59:59.000Z

468

SWIDE: semantic web integrated development environment  

Science Conference Proceedings (OSTI)

Ontology is a specification of conceptualization. This paper introduces an environment to develop semantic web applications. This environment integrates a lot of tools such as an editing capability, logic reasoner and semantic search engine. Design and ... Keywords: Jena, OWL, RDF, SPARQL, XML, ontology editor, semantic web

Islam Hany Harb; Abdurrahman A. Nasr; Salah Abdel-Magid; Hany Harb

2011-09-01T23:59:59.000Z

469

Three-dimensional Integrated Circuit Design  

Science Conference Proceedings (OSTI)

With vastly increased complexity and functionality in the "nanometer era" (i.e. hundreds of millions of transistors on one chip), increasing the performance of integrated circuits has become a challenging task. This is due primarily to the inevitable ... Keywords: Computer Architecture, Computer Engineering, Computer Science

Vasilis F. Pavlidis; Eby G. Friedman

2008-09-01T23:59:59.000Z

470

Romanian power systems engineering towards EU integration  

Science Conference Proceedings (OSTI)

The evolution of electric power system analysis methods followed the present technical problems and business needs of electric utilities in Romania, before EU integration. Present technical requirements and the current stage of power system analysis ... Keywords: computer applications, computer simulation, fourier analysis, modelling, power systems, training

Stefania Popadiuc; Bogdan Popa; Frangiskos Topalis; Cristiana Geambasu

2007-05-01T23:59:59.000Z

471

Integrating gene expression profiling and clinical data  

Science Conference Proceedings (OSTI)

We propose a combination of machine learning techniques to integrate predictive profiling from gene expression with clinical and epidemiological data. Starting from BioDCV, a complete software setup for predictive classification and feature ranking without ... Keywords: BioDCV, Biomarkers, Classification, DNA microarray, Feature selection, Functional genomics, SVM, Statistical learning

Silvano Paoli; Giuseppe Jurman; Davide Albanese; Stefano Merler; Cesare Furlanello

2008-01-01T23:59:59.000Z

472

An integrated decontamination process for metals  

DOE Patents (OSTI)

An integrated process for decontamination of metals, particularly metals that are used in the nuclear energy industry contaminated with radioactive material. The process combines the processes of electrorefining and melt refining to purify metals that can be decontaminated using either electrorefining or melt refining processes.

Snyder, T.S.; Whitlow, G.A.

1989-06-08T23:59:59.000Z

473

VISION 2050: An Integrated National Transportation System  

E-Print Network (OSTI)

VISION 2050: An Integrated National Transportation System #12;The Federal Transportation Advisory members are from the National Research Council (NRC) Transportation Research Board (TRB) and National advisory committees, including the FAA REDAC, NASA ASTAC, and the U.S. Department of Transportation (DOT

Hansman Jr., John R.

474

Integral invariants for robust geometry processing  

Science Conference Proceedings (OSTI)

Differential invariants of curves and surfaces such as curvatures and their derivatives play a central role in Geometry Processing. They are, however, sensitive to noise and minor perturbations and do not exhibit the desired multi-scale behavior. Recently, ... Keywords: 3D shape understanding, Curvature, Geometry processing, Integral invariant, Stability

Helmut Pottmann; Johannes Wallner; Qi-Xing Huang; Yong-Liang Yang

2009-01-01T23:59:59.000Z

475

Integrated Approach to Revamping Heat Exchangers Networks  

E-Print Network (OSTI)

A heat exchanger network constitutes the core of the plant energy systems interlinking the core process operation and the utility systems. This paper will illustrate an integrated approach for the revamp of a heat exchanger network by bringing together process simulation, pinch analysis and detailed heat exchanger design tools. The paper will illustrate the methodology using a refinery example.

Glass, K. E.; Dhole, V.; Wang, Y.

2002-04-01T23:59:59.000Z

476

Game-Theoretic Integration for Image Segmentation  

Science Conference Proceedings (OSTI)

Abstract¿Robust segmentation of structures from an image is essential for a variety of image analysis problems. However, the conventional methods of region-based segmentation and gradient-based boundary finding are often frustrated by poor image quality. ... Keywords: Image segmentation, integration, game theory, boundary finding, region-based segmentation, MRF.

Amit Chakraborty; James S. Duncan

1999-01-01T23:59:59.000Z

477

Integrated Retail & Wholesale Power System Operation  

E-Print Network (OSTI)

Aliprantis & Leigh Tesfatsion Last Revised: 10 August 2010 1 #12;EPRC-DOE/PNNL Combined Project: Integrated Advisors: David Chassin (DOE/PNNL, Richland, WA) & GridLAB-D Team (PNNL) Todd Hillman and Nivad Navid (MISO Thomas (EPRC Support, ECpE M.S. Student, ISU) Huan Zhao (DOE/PNNL Support, Econ PhD Student, ISU) Start

Tesfatsion, Leigh

478

California Energy Commission Pipeline Integrity Technology  

E-Print Network (OSTI)

California Energy Commission Pipeline Integrity Technology Demonstration Grant California Energy Solicitation Scope · The purpose of this solicitation is to demonstrate natural gas pipeline inspection using low cost/low power sensors ­ Improvement of existing pipeline inspection technology to identify

479

INTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE  

E-Print Network (OSTI)

of Large Commercial HVAC Systems Led by Erik Kolderup, Eley Associates, Inc. Advanced VAV System Design will modify their rating system for tubular daylighting devices; and 2) U-factor results will affect how NFRC) E3 10/03 Advanced VAV System Design Guideline (Eley) E4 5/03 Integrated Design of Small Commercial

480

Integrated solar energy harvesting and storage  

Science Conference Proceedings (OSTI)

To explore integrated solar energy harvesting as a power source for low power systems, an array of energy scavenging photodiodes based on a passive-pixel architecture for CMOS imagers has been fabricated together with storage capacitors implemented using ... Keywords: energy harvesting, low-power design, photodiodes

Nathaniel J. Guilar; Travis J. Kleeburg; Albert Chen; Diego R. Yankelevich; Rajeevan Amirtharajah

2009-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "wafer-level sub-module integrated" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

New Electric Grid Technologies for Renewable Integration  

E-Print Network (OSTI)

and changing electric loads that are becoming part of the "orchestra" · Dealing with economic and public policy & Intelligent Agent (temporal power flow control) · Solar and Wind Forecasting Tools · Generator and LoadNew Electric Grid Technologies for Renewable Integration - The Need for Being Smarter - Presented

Islam, M. Saif

482

Integrating Correlated Bayesian Networks Using Maximum Entropy  

Science Conference Proceedings (OSTI)

We consider the problem of generating a joint distribution for a pair of Bayesian networks that preserves the multivariate marginal distribution of each network and satisfies prescribed correlation between pairs of nodes taken from both networks. We derive the maximum entropy distribution for any pair of multivariate random vectors and prescribed correlations and demonstrate numerical results for an example integration of Bayesian networks.

Jarman, Kenneth D.; Whitney, Paul D.

2011-08-30T23:59:59.000Z

483

Primer on gas integrated resource planning  

Science Conference Proceedings (OSTI)

This report discusses the following topics: gas resource planning: need for IRP; gas integrated resource planning: methods and models; supply and capacity planning for gas utilities; methods for estimating gas avoided costs; economic analysis of gas utility DSM programs: benefit-cost tests; gas DSM technologies and programs; end-use fuel substitution; and financial aspects of gas demand-side management programs.

Goldman, C.; Comnes, G.A.; Busch, J.; Wiel, S. [Lawrence Berkeley Lab., CA (United States)

1993-12-01T23:59:59.000Z

484

Semantic Information Integration for Smart Grid Applications*  

E-Print Network (OSTI)

Chapter 19 Semantic Information Integration for Smart Grid Applications* Yogesh Simmhan, Qunzhi Zhou, and Viktor Prasanna* Abstract. The Los Angeles Smart Grid Project aims to use informatics that supports 1.4 million customers and a rich ecosystem of Smart Grid applications from users, third party

Prasanna, Viktor K.

485

Analog Integrated 2-D Optical Flow Sensor  

Science Conference Proceedings (OSTI)

I present a new focal-plane analog very-large-scale-integrated (aVLSI) sensor that estimates optical flow in two visual dimensions. Its computational architecture consists of a two-layer network of locally connected motion units that collectively ... Keywords: constraint satisfaction, neuromorphic, parallel computation, recurrent network, regularization

Alan A. Stocker

2006-02-01T23:59:59.000Z

486

Integration by cell algorithm for Slater integrals in a spline basis  

Science Conference Proceedings (OSTI)

An algorithm for evaluating Slater integrals in a B-spline basis is introduced. Based on the piecewise property of the B-splines, the algorithm divides the two-dimensional (r{sub 1}, r{sub 2}) region into a number of rectangular cells according to the chosen grid and implements the two-dimensional integration over each individual cell using Gaussian quadrature. Over the off-diagonal cells, the integrands are separable so that each two-dimensional cell-integral is reduced to a product of two one-dimensional integrals. Furthermore, the scaling invariance of the B-splines in the logarithmic region of the chosen grid is fully exploited such that only some of the cell integrations need to be implemented. The values of given Slater integrals are obtained by assembling the cell integrals. This algorithm significantly improves the efficiency and accuracy of the traditional method that relies on the solution of differential equations and renders the B-spline method more effective when applied to multi-electron atomic systems.

Qiu, Y.; Fischer, C.F.

1999-12-10T23:59:59.000Z

487

Western Wind and Solar Integration Study  

SciTech Connect

The Western Wind and Solar Integration Study (WWSIS) is one of the largest regional wind and solar integration studies to date. It was initiated in 2007 to examine the operational impact of up to 35% energy penetration of wind, photovoltaics (PV), and concentrating solar power (CSP) on the power system operated by the WestConnect group of utilities in Arizona, Colorado, Nevada, New Mexico, and Wyoming (see study area map). WestConnect also includes utilities in California, but these were not included because California had already completed a renewable energy integration study for the state. This study was set up to answer questions that utilities, public utilities commissions, developers, and regional planning organizations had about renewable energy use in the west: (1) Does geographic diversity of renewable energy resource help mitigate variability; (2) How do local resources compare to out-of-state resources; (3) Can balancing area cooperation help mitigate variability; (4) What is the role and value of energy storage; (5) Should reserve requirements be modified; (6) What is the benefit of forecasting; and (7) How can hydropower help with integration of renewables? The Western Wind and Solar Integration Study is sponsored by the U.S. Department of Energy (DOE) and run by NREL with WestConnect as a partner organization. The study follows DOE's 20% Wind Energy by 2030 report, which did not find any technical barriers to reaching 20% wind energy in the continental United States by 2030. This study and its partner study, the Eastern Wind Integration and Transmission Study, performed a more in-depth operating impact analysis to see if 20% wind energy was feasible from an operational level. In DOE/NREL's analysis, the 20% wind energy target required 25% wind energy in the western interconnection; therefore, this study considered 20% and 30% wind energy to bracket the DOE analysis. Additionally, since solar is rapidly growing in the west, 5% solar was also considered in this study. The goal of the Western Wind and Solar Integration Study is to understand the costs and operating impacts due to the variability and uncertainty of wind, PV, and CSP on the grid. This is mainly an operations study, (rather than a transmission study), although different scenarios model different transmission build-outs to deliver power. Using a detailed power system production simulation model, the study identifies operational impacts and challenges of wind energy penetration up to 30% of annual electricity consumption.

Lew, D.; Piwko, R.; Jordan, G.; Miller, N.; Clark, K.; Freeman, L.; Milligan, M.

2011-01-01T23:59:59.000Z

488

Development of large-area monolithically integrated silicon-film{trademark} photovoltaic modules. Final subcontract report, May 1, 1991--December 31, 1994  

DOE Green Energy (OSTI)

The objective of this program is to develop Silicon Film{trademark} Product III into a low-cost, stable solar cell for large-scale terrestrial power applications. The Product III structure is a thin (<100 {mu}m) polycrystalline layer of silicon on a durable, insulating, ceramic substrate. The insulating substrate allows the silicon layer to be isolated and metallized to form a monolithically interconnected array of solar cells. High efficiency is achieved by the use of light trapping and passivated surfaces. This project focused on the development of five key technologies associated with the monolithic sub-module device structure: (1) development of the film deposition and growth processes; (2) development of the low-cost ceramic substrate; (3) development of a metallurgical barrier technology; (4) development of sub-element solar cell processing techniques; and (5) development of sub-module (isolation and interconnection) processes. This report covers the development approaches and results relating to these technologies. Significant progress has been made in the development of all of the related technologies. This is evidenced by the fabrication of a working 12.0 cm{sup 2} prototype sub-module consisting of 7 elements and testing with an open circuit voltage of 3.9 volts, a short circuit current of 35.2 mA and a fill factor of 63% and an overall efficiency of 7.3%. Another significant result achieved is a 13.4% (NREL verified), 1.0 cm{sup 2} solar cell fabricated from material deposited and grown on a graphite cloth substrate. The significant technological hurdle of the program was and remains the low quality of the photovoltaic layer which is caused by contamination of the photovoltaic layer from the low-cost ceramic substrate by trace impurities found in the substrate precursor materials. The ceramic substrate and metallurgical barrier are being developed specifically to solve this problem.

Hall, R.B.; Rand, J.A.; Cotter, J.E. [AstroPower, Inc., Newark, DE (United States)

1995-04-01T23:59:59.000Z

489

National conference on integrated resource planning: Proceedings  

Science Conference Proceedings (OSTI)

Until recently, state regulators have focused most of their attention on the development of least-cost or integrated resource planning (IRP) processes for electric utilities. A number of commissions are beginning to scrutinize the planning processes of local gas distribution companies (LDCs) because of the increased control that LDCs have over their purchased gas costs (as well as the associated risks) and because of questions surrounding the role and potential of gas end-use efficiency options. Traditionally, resource planning (LDCs) has concentrated on options for purchasing and storing gas. Integrated resource planning involves the creation of a process in which supply-side and demand-side options are integrated to create a resource mix that reliably satisfies customers' short-term and long-term energy service needs at the lowest cost. As applied to gas utilities, an integrated resource plan seeks to balance cost and reliability, and should not be interpreted simply as the search for lowest commodity costs. The National Association of Regulatory Utility Commissioners' (NARUC) Energy Conservation committee asked Lawrence Berkeley Laboratory (LBL) to survey state PUCs to determine the extent to which they have undertaken least cost planning for gas utilities. The survey included the following topics: status of state PUC least-cost planning regulations and practices for gas utilities; type and scope of natural gas DSM programs in effect, including fuel substitution; economic tests and analysis methods used to evaluate DSM programs; relationship between prudency reviews of gas utility purchasing practices and integrated resource planning; key regulatory issued facing gas utilities during the next five years.

Not Available

1991-01-01T23:59:59.000Z

490

National conference on integrated resource planning: Proceedings  

Science Conference Proceedings (OSTI)

Until recently, state regulators have focused most of their attention on the development of least-cost or integrated resource planning (IRP) processes for electric utilities. A number of commissions are beginning to scrutinize the planning processes of local gas distribution companies (LDCs) because of the increased control that LDCs have over their purchased gas costs (as well as the associated risks) and because of questions surrounding the role and potential of gas end-use efficiency options. Traditionally, resource planning (LDCs) has concentrated on options for purchasing and storing gas. Integrated resource planning involves the creation of a process in which supply-side and demand-side options are integrated to create a resource mix that reliably satisfies customers` short-term and long-term energy service needs at the lowest cost. As applied to gas utilities, an integrated resource plan seeks to balance cost and reliability, and should not be interpreted simply as the search for lowest commodity costs. The National Association of Regulatory Utility Commissioners` (NARUC) Energy Conservation committee asked Lawrence Berkeley Laboratory (LBL) to survey state PUCs to determine the extent to which they have undertaken least cost planning for gas utilities. The survey included the following topics: status of state PUC least-cost planning regulations and practices for gas utilities; type and scope of natural gas DSM programs in effect, including fuel substitution; economic tests and analysis methods used to evaluate DSM programs; relationship between prudency reviews of gas utility purchasing practices and integrated resource planning; key regulatory issued facing gas utilities during the next five years.

Not Available

1991-12-31T23:59:59.000Z

491

NREL: Energy Systems Integration - U.S. DOE's Energy Systems Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

September 2013 September 2013 Energy Systems Integration eNewsletter As energy systems integration (ESI) rapidly gains momentum as a new science and the Energy Systems Integration Facility (ESIF) opens its doors for business, the past few months have been marked with important milestones at the National Renewable Energy Laboratory (NREL). After announcing the ESIF as the newest U.S. Department of Energy (DOE) user facility in June, Energy Secretary Ernest Moniz made a visit to NREL this month and officially dedicated the ESIF as the nation's first major research facility focused on clean energy grid integration and wide-scale deployment. Read on to learn more about the latest news surrounding ESI at NREL. In this Issue Energy Secretary Moniz Headlines September 11 ESIF Dedication

492

Integrated safety management system verification: Volume 1  

SciTech Connect

Department of Energy (DOE) Policy (P) 450.4, Safety Management System Policy, commits to institutionalizing an Integrated Safety Management System (ISMS) throughout the DOE complex. The DOE Acquisition Regulations (DEAR 48 CFR 970) requires contractors to manage and perform work in accordance with a documented Integrated Safety Management System. The Manager, Richland Operations Office (RL), initiated a combined Phase 1 and Phase 2 Integrated Safety Management Verification review to confirm that PNNL had successfully submitted a description of their ISMS and had implemented ISMS within the laboratory facilities and processes. A combined review was directed by the Manager, RL, based upon the progress PNNL had made in the implementation of ISM. This report documents the results of the review conducted to verify: (1) that the PNNL integrated safety management system description and enabling documents and processes conform to the guidance provided by the Manager, RL; (2) that corporate policy is implemented by line managers; (3) that PNNL has provided tailored direction to the facility management; and (4) the Manager, RL, has documented processes that integrate their safety activities and oversight with those of PNNL. The general conduct of the review was consistent with the direction provided by the Under Secretary`s Draft Safety Management System Review and Approval Protocol. The purpose of this review was to provide the Manager, RL, with a recommendation to the adequacy of the ISMS description of the Pacific Northwest Laboratory based upon compliance with the requirements of 49 CFR 970.5204(-2 and -78); and, to provide an evaluation of the extent and maturity of ISMS implementation within the Laboratory. Further, this review was intended to provide a model for other DOE Laboratories. In an effort to reduce the time and travel costs associated with ISM verification the team agreed to conduct preliminary training and orientation electronically and by phone. These activities are normally conducted during a pre-visit trip to the site. The Team recommends approval of the Integrated Safety Management System Description subject to the resolution of the Areas of Concerns noted here.

Christensen, R.F.

1998-08-12T23:59:59.000Z

493

Guide to Integrating Renewable Energy in Federal Construction: Outreach  

NLE Websites -- All DOE Office Websites (Extended Search)

Outreach to someone by E-mail Outreach to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Outreach on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Outreach on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Outreach on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Outreach on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Outreach on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Outreach on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

494

Guide to Integrating Renewable Energy in Federal Construction: Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Resources to someone by E-mail Resources to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Resources on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Resources on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Resources on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Resources on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Resources on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Resources on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

495

Guide to Integrating Renewable Energy in Federal Construction: Major  

NLE Websites -- All DOE Office Websites (Extended Search)

Major Renovations to someone by E-mail Major Renovations to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Major Renovations on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding

496

Guide to Integrating Renewable Energy in Federal Construction: Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Project Construction to someone by E-mail Project Construction to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Project Construction on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Project Construction on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting

497

Federal Energy Management Program: Guide to Integrating Renewable Energy in  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Energy Management Program: Guide to Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction to someone by E-mail Share Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction on Facebook Tweet about Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction on Twitter Bookmark Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction on Google Bookmark Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction on Delicious Rank Federal Energy Management Program: Guide to Integrating Renewable Energy in Federal Construction on Digg Find More places to share Federal Energy Management Program: Guide

498

Guide to Integrating Renewable Energy in Federal Construction: Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training to someone by E-mail Training to someone by E-mail Share Guide to Integrating Renewable Energy in Federal Construction: Training on Facebook Tweet about Guide to Integrating Renewable Energy in Federal Construction: Training on Twitter Bookmark Guide to Integrating Renewable Energy in Federal Construction: Training on Google Bookmark Guide to Integrating Renewable Energy in Federal Construction: Training on Delicious Rank Guide to Integrating Renewable Energy in Federal Construction: Training on Digg Find More places to share Guide to Integrating Renewable Energy in Federal Construction: Training on AddThis.com... Home Introduction Assessing Renewable Energy Options Planning, Programming, & Budgeting Project Funding Building Design Project Construction Commissioning Operations & Maintenance

499

Integrating Efficiency Into Climate Change Mitigation Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

Integrating Efficiency Into Climate Change Mitigation Policy Integrating Efficiency Into Climate Change Mitigation Policy Speaker(s): Steven R. Schiller Date: December 8, 2008 - 12:00pm Location: 90-4133 Seminar Host/Point of Contact: Richard Diamond Steve will discuss policy options for deploying energy efficiency resources in electricity (non-transportation) end-use markets to meet needed GHG emission reduction levels. This discussion will include listing some barriers inherent to climate policy design, as well as energy markets, that inhibit efficiency investment as an emissions reduction strategy. However, the focus of the talk is on recommendations for effective mechanisms that incorporate end-use electricity energy efficiency into climate change mitigation efforts. In a recent ACEEE paper, Steve and his co-authors,

500

PARS II - Integrated Project Team Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Project Team Meeting Integrated Project Team Meeting John Makepeace (OECM) Ken Henderson (EES), Norm Ayers (EES) November 19, 2009 2 2 Agenda * Brief Review Last Meeting * List of Action Items * Project Milestones * Communications Channels for Deployment * Requesting Contacts for EM Group 1 & 2 Projects * Information Package to Contractor * Letter of Introduction * CPP Upload Document * Project Data Template * New Action Items * List of EM Group 1 & 2 Projects 3 Action Items Item Action Item Status 1 EES will write the marketing cover letter for the Information Package. C 2 EES will deliver the Preliminary Information Package to OECM by Monday Nov 16, close of business, for review. C 3 A placeholder of COB Tuesday Nov 17 was established for EES to give OECM the Information Package. C 4 Distribution of the package will commence after review by OECM.