National Library of Energy BETA

Sample records for visitors print als

  1. ALS Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... September 2012 Congressman Steve Womack (R-Arkansas) toured the ALS on September 25, along ... Womack, a freshman member of Congress is Vice Chairman of the House Energy and Water ...

  2. W7 printing from VISITOR network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W7 printing from VISITOR network Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "start menu", click on "Devices and Printers" 2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose "create a new port" and pick "Standard TCP/IP Port" from the drop down menu. 4. Type the following for the next box and click "Next": Hostname or IP address: PRINTSERV.slac.stanford.edu Port name: This should be the DNS

  3. Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    visitors Visitors Upon arrival, all non-LLNL visitors touring the Facility must first report to Beth Mariotti (ext. 4-3396). All visitors, including employees of LLNL, are required to be escorted by a member of Facility Operations or an individual approved by Operations. Visitors tours can only be conducted when no safety hazards (i.e., laser, high voltage, radiation) are present

  4. Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors For Visitors A repository for images for those visiting Los Alamos and Northern New Mexico. News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets PHOTOS BY TOPIC Careers Community Visitors Environment History Science The Lab Click thumbnails to enlarge. Photos arranged by most recent first, horizontal formats before vertical. See Flickr for more sizes and details. Northern New Mexico Northern New Mexico Summer lightning storms in Northern

  5. Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors Visitors Coming to Los Alamos? Need badging information? Need local resources or housing? This is the place. Badging, Badge Office» Bradbury Science Museum» Education Office Housing» Living in Los Alamos» TOP STORIES - highlights of our science, people, technologies close Rio Arriba Leadership Summit addresses challenges, opportunities Community leaders gather in Española for a round-table discussion. READ MORE DOE's Office of Small and Disadvantaged Business Utilization presented

  6. ALS Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Currently the group is developing a regional solar-permitting policy to streamline the process and cost of installing residential solar panels. During their visit, members toured ...

  7. ALS Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... of zeolites and transition metal oxide catalysts, and he has ... (including updates on demandresponse, residential ... research and development, earth sciences, advanced ...

  8. Visitor Hanford Computer Access Request - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Visitor Hanford Computer Access Request Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size The U.S. Department of Energy (DOE), Richland Operations Office (RL), in compliance with the 'Tri-Party Agreement Databases, Access Mechanism and Procedures' document, DOE/RL-93-69, Revision 5; set forth the requirements for access to the Hanford Site

  9. International Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors Foreign national visitors come to Jefferson Lab temporarily to engage in meetings, brief research activities to benefit their home institutions, collaborations, signing agreements, attending conferences, workshops, or other scientific events and/or activities, by entering the U.S. as a "business visitor." Foreign national visits to Jefferson Lab are accomplished by entering the U.S. with a B-1 visa (obtained from a U.S. Embassy/Consulate) or using the Visa Waiver Program. If

  10. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Info Visitor Information NERSC is located in Shyh Wang Hall-also known as the computational research and theory (CRT) building (Bldg. 59)-on the campus of Lawrence Berkeley National Laboratory in Berkeley, California. You can find information about visiting the lab, including an interactive campus map, transportation and lodging suggestions at http://www.lbl.gov/visit/. Your host must arrange site access prior to your visit. Last edited: 2016-01-06 16:48:46

  11. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Info Visitor Information NERSC is located in Shyh Wang Hall-also known as the computational research and theory (CRT) building (Bldg. 59)-on the campus of Lawrence Berkeley National Laboratory in Berkeley, California. You can find information about visiting the lab, including an interactive campus map, transportation and lodging suggestions at http://www.lbl.gov/visit/. Your host must arrange site access prior to your visit. Last edited: 2016-01-06 16:48:46

  12. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Information Visitor Information The Museum is open to the public every day except Thanksgiving, Christmas, and New Year's. Contact Us thumbnail of 1350 Central Avenue Bradbury Science Museum 1350 Central Avenue 505 667-4444 Email Museum Hours Open every day except Thanksgiving, Christmas, and New Year's. Tuesday-Saturday: 10 am-5 pm Sunday & Monday: 1-5 pm FREE ADMISSION Download our brochure for more information (pdf) Weather conditions Call ahead during snow storms: (505) 667-6622 or (877)

  13. Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Information Visiting the Transportation Research and Analysis Computing Center For guests who wish to visit and meet with the technical staff, please contact the TRACC service desk or the Technical Point of Contact assigned to you for registration, scheduling, and confirmation, including Foreign Visits and Assignments. Registration with your host is required for entry into the TRACC facilities. A photo I.D., such as a driver's license or passport, is also required for facility access. If

  14. HEP Committees of Visitors | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Committees of Visitors HEP Committees of Visitors Print Text Size: A A A FeedbackShare Page High Energy Physics Advisory Panel (HEPAP) The links below provide an archive of High ...

  15. ARM - Historical Visitor Statistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Operational Visitors and Accounts Data Archive and Usage (October 1995 - Present) Historical Visitor Statistics As a national user facility, ARM is required to report...

  16. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    < 5k 0 < 50k < 100k < 250k < 500k < 1M > 1M > 5M > 10M DE MD DC MA RI NJ AZ UT WY ID OR WA CA TX OK KS CO NE SD ND MN WI IL IA MO AR LA MS AL FL GA TN KY IN OH MI ME NH CT VT NY PA WV VA NC SC MT AK HI NV NM Princeton Plasma Physics Laboratory Procured Materials and Services 2015 (> $35M) Small business procurements in US: $14.73M

  17. Visitor Control / Site Access - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    About Us Hanford Site Wide Programs Visitor Control / Site Access About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Hanford Cultural Resources Contact Us Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size Planning to come to the Hanford Site? Map of Hanford Map of Hanford If you are planning on coming to Hanford as part of a job assignment, tour, or event, you need to be familiar with the requirements and restrictions associated with being on

  18. FES Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FES Committees of Visitors Fusion Energy Sciences Advisory Committee (FESAC) FESAC Home Meetings Members Charges/Reports Charter .pdf file (266KB) FES Committees of Visitors Federal Advisory Committees FES Home FES Committees of Visitors Print Text Size: A A A FeedbackShare Page Fusion Energy Sciences Advisory Committee (FESAC) » The links below provide an archive of Fusion Energy Sciences (FES) Committees of Visitors (COV) reports and responses. 2014 FESAC COV Report on FES Program .pdf file

  19. Exchange Visitor Welcome Brochure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Exchange Visitor Program WELCOME BROCHURE Bureau of Educational and Cultural Affairs Private Sector Exchange United States Department of State The Department of State welcomes you to the United States. We are pleased to receive you as an exchange visitor. As an Exchange Visitor Program participant, you will acquire an experience in the United States and as an ambassador of your country you will help educate the American people about your home country and culture. This brochure will help you

  20. W7 printing from VISITOR network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2. Click on "Add a printer" and choose "Add a local printer". 3 . Choose "create a new port" and pick "Standard TCPIP Port" from the drop down menu. 4. Type the following for the...

  1. campus-visitor-map

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MC-212 Pollard Aud. MC- 210 MC- 120 MC-130 MC-100 Main Campus Map Building RoomOffice Contact Name + Number Visitor Map You are here. Emergency Assembly Point Entrance Buildings...

  2. BPA Visitor Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and is located at BPA headquarters in Portland, Oregon at 905 NE 11th Ave. (Public Transit @ the Lloyd Center MAX Station). Many of the publications available in the Visitor...

  3. Visitors | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors Visitors are welcome at Ames Laboratory. As a U.S. Department of Energy research facility, Ames Laboratory is subject to security conditions established by the Department of Homeland Security. To make sure that you are complying with the current security conditions, please check with the Plant Protection Desk on the ground floor level of the Technical and Administrative Services Facility (TASF) building. Protection personnel can help you locate a specific staff member or direct you to a

  4. DOE - NNSA/NFO -- Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Information NNSANFO Language Options U.S. DOENNSA - Nevada Field Office Visitor Information The Nevada Field Office welcomes visitors to its facilities, but if you plan ...

  5. Visitor Information | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In both cases a visitor will be asked to sign in to the Captive Portal network service using a temporary assigned visitor username and password. Wireless Network Access for ...

  6. Craig Thomas Discovery & Visitor Center

    High Performance Buildings Database

    Moose, WY Grand Teton National Park's rugged landscape and stunning array of wildlife attract nearly three million visitors every year, making it one of our most popular national parks. A new Grand Teton National Park visitor center near the park's headquarters north of Jackson, Wyoming, replaces an outdated building, educates an increased number of visitors, and inspires further exploration of this extraordinary landscape. The project site is located along the Snake River, between a riparian forest and a sagebrush meadow.

  7. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable,...

  8. NREL Visitors Center Closing Temporarily for Remodeling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitors Center Closing Temporarily for Remodeling Media may contact: George Douglas, 303-275-4096 email: George Douglas Golden, Colo., Sept. 6, 2000 - The Visitors Center at the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) will be closed Friday, Sept. 8 through Friday, Sept. 22 for the installation of new floor tile and carpet. Visitors Center staff expects to re-open the building for normal operation on Monday, Sept. 25. Contact the Visitors Center volunteer

  9. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable, ...

  10. ALS Communications Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Communications Group Print From left: Ashley White, Lori Tamura, Keri Troutman, and Carina Braun. The ALS Communications staff maintain the ALS Web site; write and edit all...

  11. Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of our science, people, technologies close Grape Growers Association enlivens agriculture Entrepreneurial Networking Program unites New Mexico grape growers for successful...

  12. Sandia National Laboratories/California Visitor Map to the Visitor Badge Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories/California Visitor Map to the Visitor Badge Office You will be required to show picture ID (driver's license or passport) for check in. Your name will be on an "authorized for access" list to obtain your badge. Because all visitors must be badged and escorted, visiting Sandia requires some logistical preparation. Each prospective visitor must provide the following information before their visit: * First, middle, and last name * Social Security number * Citizenship *

  13. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Print web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User Meeting...

  14. Alternative Fuels Data Center: Propane Buses Shuttle Visitors in Maine

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Propane Buses Shuttle Visitors in Maine to someone by E-mail Share Alternative Fuels Data Center: Propane Buses Shuttle Visitors in Maine on Facebook Tweet about Alternative Fuels Data Center: Propane Buses Shuttle Visitors in Maine on Twitter Bookmark Alternative Fuels Data Center: Propane Buses Shuttle Visitors in Maine on Google Bookmark Alternative Fuels Data Center: Propane Buses Shuttle Visitors in Maine on Delicious Rank Alternative Fuels Data Center: Propane Buses Shuttle Visitors in

  15. Computing and Computational Sciences Directorate - Visitor Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home › About Us Visitor Information Entering ORNL ORNL welcomes visitors to the Laboratory. However, because of increased security requirements, we've made some changes in how the site is accessed. Bethel Valley Road, which is the main access route to Oak Ridge National Laboratory from both directions, is now closed to the public. If you are planning a visit to ORNL, your host will arrange for you to proceed past entrance stations on Bethel Valley Road leading to the Laboratory's Visitor

  16. Oak Ridge Visitors Center Solar Array

    Broader source: Energy.gov [DOE]

    This photograph features a 5-kilowatt photovoltaic (PV) system in front of the Oak Ridge National Laboratory Visitors Center that was dedicated in 2007 to kick off the first Southeast Solar Summit....

  17. Directions and Visitor Information | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directory Argonne National Laboratory About Safety News Careers Education Community Diversity Directory Energy Environment Security User Facilities Science Work with Argonne Visiting Argonne Site Access Policy Map Argonne-University of Chicago Shuttle Map of Argonne Commitment to Safety Argonne is dedicated to protecting visitors to our campus. Every visitor watches a two-minute training video about how to protect oneself and others while on campus. External dosimetry The External Dosimetry

  18. Visitor Security Requirements | Savannah River Ecology Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visitor Security Requirements NOTE: These requirements do not apply to events held at the SREL Conference Center, which is located outside the security barricade. Before you arrive: I. Obtaining a visitor's badge II. Prohibited articles III. Electronics policy IV. Vehicle inspections When you arrive: Proceed to the badge office (map). Present two forms of identification from the list of acceptable documents, including one photo ID, to receive your badge. You will not receive a badge without

  19. Exchange Visitors Program | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exchange Visitors Program Exchange Visitors Program The Department of Energy program offices engage in a variety of cooperative international exchanges and program initiatives which involve sponsoring foreign national professionals to work on projects in the U.S. The Office of Travel Management provides assistance to DOE Program Elements on employer-sponsored visa issues, and requirements. DOE J-1 Visas - provide foreign nationals with opportunities to participate in educational and cultural

  20. Al

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on the way to the drip line .... 31 Al 28 Mg 32 Si 12 B + 18 O 30 Al* (-pn) 28 Mg 15 C + 18 O 33 Si* (-pn) 31 Al 16 N + 18 O 34 P* (-pn) 32 Si 15 C 10 7 s...

  1. Printing | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing Printing The Printing Team is the liaison between the U.S. Government Printing Office and the Department of Energy. It consists of an expert group of printing specialists who offer a full range of services from assistance in developing your printing requirements to the final printing, distribution and mailing of products. The printed products range from black and white to full color items. These Services are available through the Working Capital Fund. The Printing Office produces a

  2. Industry @ ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry @ ALS Industry @ ALS Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools Print Thursday, 05 May 2016 11:21 For the past eight years, Hewlett Packard Labs, the central research organization of Hewlett Packard Enterprise, has been using cutting-edge ALS techniques to advance some of their most promising technological research, including vanadium dioxide phase transitions and atomic movement during memristor operation. Summary Slide Read more... ALS, Molecular Foundry,

  3. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable, newsletter-like format. Featured scientific and facility developments are front-paged, and a roundup of science highlights is provided in easily browsable summaries with Web links. Contents also include brief reports from ALS staff and user groups, articles about ALS people and events, and facility updates. These documents

  4. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable, newsletter-like format. Featured scientific and facility developments are front-paged, and a roundup of science highlights is provided in easily browsable summaries with Web links. Contents also include brief reports from ALS staff and user groups, articles about ALS people and events, and facility updates. These documents

  5. FES Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FES Committees of Visitors Deputy Director for Science Programs Deputy Director Home Mission & Functions Deputy Director Biography Organization Staff Presentations & Testimony Federal Advisory Committees Committees of Visitors ASCR Committees of Visitors BES Committees of Visitors BER Committees of Visitors FES Committees of Visitors HEP Committees of Visitors NP Committees of Visitors WDTS Committees of Visitors Contact Information Deputy Director for Science Programs U.S. Department of

  6. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 ALS User Meeting Awards Print Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User...

  7. Pre-Arrival Information for Exchange Visitors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Page1 U.S. Department of Energy Exchange Visitor Program G-3-00348 Welcome to the Department of Energy Exchange Visitor Program! This is to give pre-arrival information that you will need to successfully plan your visit to the United States, and to help you understand the terms and conditions of your upcoming exchange assignment at the U.S. Department of Energy facility or National Laboratory, to which you are assigned. Please check this information immediately. If you have questions, please

  8. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2013 ALS User Meeting Print banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users'...

  9. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable, newsletter-like format. Featured scientific and facility developments are front-paged, and a roundup of science highlights is provided in easily browsable summaries with Web links. Contents also include brief reports from ALS staff and user groups, articles about ALS people and events, and facility updates. These documents are

  10. ALS Spectrum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spectrum Print Begun in 2007, ALS Spectrum is a publication that encapsulates the same type of information contained in the ALS Activity Report but in a short, readable, newsletter-like format. Featured scientific and facility developments are front-paged, and a roundup of science highlights is provided in easily browsable summaries with Web links. Contents also include brief reports from ALS staff and user groups, articles about ALS people and events, and facility updates. These documents are

  11. Jefferson Lab Visitor's Center - Schedule a Tour

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Regional Map Virtual Tour Schedule a Tour Newport News Resources Places to Visit Tourist Attractions Restaurants Climate and Weather Tour Safety Jefferson Lab Environmental, Health & Safety Manual Chapter 3230: Communication of Hazards to Visitors Jefferson Lab is classified as a low-hazard facility. This means the hazards encountered here are comparable to those typically found in an industrial setting. There are a few places on-site where minimal personal protective equipment (PPE) is

  12. World's First Printed Car

    SciTech Connect (OSTI)

    Rogers, Jay

    2015-06-03

    Local Motors partnered with ORNL to print the worlds first 3D-printed car (Strati) at the 2014 International Manufacturing Technology Show.

  13. Illustrious Visitors Good Hosts Real Celebrity | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Illustrious Visitors Good Hosts Real Celebrity Illustrious Visitors; Good Hosts! Real Celebrity. June 15, 2015 On a regular basis, the DOE Site Office asks us to update our list of illustrious visitors; often, there is nothing to say. Other times we are inundated. The past few months has seen a fine selection of events hosted by Jefferson Lab, and Jefferson Science Associates and its parent Southeastern Universities Research Association. This past week, Joachim Mnich, a member of the DESY

  14. ORO Office Safeguards and Security Clearance Tracking System and Visitor

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Control System PIA, Oak Ridge Operations Office | Department of Energy Office Safeguards and Security Clearance Tracking System and Visitor Control System PIA, Oak Ridge Operations Office ORO Office Safeguards and Security Clearance Tracking System and Visitor Control System PIA, Oak Ridge Operations Office ORO Office Safeguards and Security Clearance Tracking System and Visitor Control System PIA, Oak Ridge Operations Office ORO Office Safeguards and Security Clearance Tracking System and

  15. ALS Ceramics Materials Research Advances Engine Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Ceramics Materials Research Advances Engine Performance ALS Ceramics Materials Research Advances Engine Performance Print Thursday, 27 September 2012 00:00 ritchie ceramics...

  16. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and...

  17. ALS Communications Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Communications Group Print From left: Ashley White, Lori Tamura, and Keri Troutman. The ALS Communications staff maintain the ALS Web site; write and edit all print and electronic publications for the ALS, including Science Highlights, Science Briefs, brochures, handouts, and the monthly newsletter ALSNews; and create educational and scientific outreach materials. In addition, members of the group organize bi-monthly Science Cafés, create conference and workshop Web sites and publicity, and

  18. ALS Communications Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Communications Group Print From left: Ashley White, Lori Tamura, and Keri Troutman. The ALS Communications staff maintain the ALS Web site; write and edit all print and electronic publications for the ALS, including Science Highlights, Science Briefs, brochures, handouts, and the monthly newsletter ALSNews; and create educational and scientific outreach materials. In addition, members of the group organize bi-monthly Science Cafés, create conference and workshop Web sites and publicity, and

  19. HEP Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees of Visitors High Energy Physics (HEP) HEP Home About Organization Chart .pdf file (106KB) Staff HEP Budget HEP Committees of Visitors Directions Jobs University Research ...

  20. Intense X-rays expose tiny flaws in 3-D printed titanium that...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Researchers theorized there would be a "sweet spot" at which they could set printing ... was a little bitter: there was no sweet spot for printing flawless Ti-6Al-4V. ...

  1. Compact organic vapor jet printing print head

    DOE Patents [OSTI]

    Forrest, Stepehen R; McGraw, Gregory

    2015-01-27

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print head further includes a first layer further comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  2. Compact organic vapor jet printing print head

    DOE Patents [OSTI]

    Forrest, Stephen R; McGraw, Gregory

    2013-12-24

    A first device is provided. The first device includes a print head, and a first gas source hermetically sealed to the print head. The print header further includes a first layer comprising a plurality of apertures, each aperture having a smallest dimension of 0.5 to 500 microns. A second layer is bonded to the first layer. The second layer includes a first via in fluid communication with the first gas source and at least one of the apertures. The second layer is made of an insulating material.

  3. Village Power Exhibit Featured at NREL's Visitors Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Village Power Exhibit Featured at NREL's Visitors Center "Powering Our Lives, Powering Our World Energy" Expo Slated for February-April For more information contact: Gary Schmitz, 303-275-4050 email: Gary Schmitz Golden, Colo., Feb. 16, 2001 - An exhibit that demonstrates how renewable energy sources can bring needed electricity to developing nations worldwide opens Feb. 20 at the Visitors Center of the U.S. Department of Energy's National Renewable Energy Laboratory. The Village Power

  4. Fernald Preserve Visitors Center Grand Opening and LEED Platinum

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Certification | Department of Energy Fernald Preserve Visitors Center Grand Opening and LEED Platinum Certification Fernald Preserve Visitors Center Grand Opening and LEED Platinum Certification October 16, 2008 - 4:14pm Addthis Remarks as Prepared for Acting Deputy Secretary Kupfer Thank you, Mike, for that introduction and to both you and Jane for hosting this event. You both have been instrumental in the dramatic transformation of this site. We made a commitment more than a decade ago to

  5. ALS Chemistry Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Chemistry Lab Print ALS Chemistry Labs The ALS Chemistry Labs are located in the User Support Building (15-130) and in Building 6 (6-2233)*. These spaces are dedicated for chemistry work that involves higher quantities, higher toxicity or reactivity, and/or more complex work activity than is allowed on the ALS experiment floor. In addition, the great majority of hazardous chemicals at the ALS are stored in these facilities. Standard chemical safety engineering, administrative and PPE

  6. ALS Chemistry Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Chemistry Lab Print ALS Chemistry Labs The ALS Chemistry Labs are located in the User Support Building (15-130) and in Building 6 (6-2233)*. These spaces are dedicated for chemistry work that involves higher quantities, higher toxicity or reactivity, and/or more complex work activity than is allowed on the ALS experiment floor. In addition, the great majority of hazardous chemicals at the ALS are stored in these facilities. Standard chemical safety engineering, administrative and PPE

  7. ALS "Workhorse" Endstation Retires after 22 Years of Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Workhorse" Endstation Retires after 22 Years of Service ALS "Workhorse" Endstation Retires after 22 Years of Service Print Following a career spanning over two decades, ALS ...

  8. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Collaborative Postdoctoral Fellowship Program ALS Collaborative Postdoctoral Fellowship Program Print Monday, 19 July 2010 15:13 The Advanced Light Source (ALS) Collaborative Postdoctoral Fellowship program provides challenging opportunities to conduct research and instrument development in areas supporting the scientific programs of the Department of Energy (DOE), Lawrence Berkeley National Laboratory (LBNL), and the ALS that include physical, chemical, material, energy, environmental,

  9. ALS Chemistry Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chemistry Lab Print ALS Chemistry Labs The ALS Chemistry Labs are located in the User Support Building (15-130) and in Building 6 (6-2233)*. These spaces are dedicated for chemistry work that involves higher quantities, higher toxicity or reactivity, and/or more complex work activity than is allowed on the ALS experiment floor. In addition, the great majority of hazardous chemicals at the ALS are stored in these facilities. Standard chemical safety engineering, administrative and PPE controls

  10. Interagency Visitor Center at Santa Monica Mountains National Recreation Area

    High Performance Buildings Database

    Calabasas, CA This project was to develop the first visitor center for the Santa Monica Mountains National Recreation Area located in the Los Angeles, California area. The previous visitor center was across from a shopping mall in rental space at park headquarters in Thousand Oaks. The new facility is centrally located in the park at a much more appropriate natural and cultural resource setting. It is a partnership project with the Mountains Recreation and Conservation Authority, which is a local land conservation and park agency. It is also a joint facility with California State Parks.

  11. Non-Contact Printed Aluminum Metallization of Si Photovoltaic Devices: Preprint

    SciTech Connect (OSTI)

    Platt, H. A. S.; van Hest, M. F. A. M.; Li, Y.; Novak, J. P.

    2012-06-01

    Alternative solution-based techniques such as aerosol jet printing offer the dual benefits of contactless pattern deposition and high material utilization. We have used aerosol jet printing to investigate non-contact printed Al metal ink as a replacement for screen printed Al back contacts on wafer Si solar cells. This particle-based ink can be prepared at high loadings of 60 weight % metal, which enables rapid deposition of 1 - 10 um thick lines. Al lines printed on Si wafers and heated between 550 and 800 degrees C form low resistance contacts suitable for current extraction. The effectiveness of these printed Al back contacts has further been demonstrated by incorporating them into a series of 21 cm2 crystalline Si solar cells that produced a champion power conversion efficiency of 13%.

  12. ALS Operating Schedule on Google Calendar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Operating Schedule on Google Calendar Print ALS Operating Schedule Your browser does not appear to support JavaScript, but this page needs to use JavaScript to display...

  13. Promising Magnesium Battery Research at ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Promising Magnesium Battery Research at ALS Promising Magnesium Battery Research at ALS Print Wednesday, 23 January 2013 16:59 toyota battery a) Cross-section of the in situ ...

  14. ALS 20th Anniversary Celebration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20th Anniversary Celebration Print The 20th anniversary of the ALS was celebrated on Friday, October 4, with style, good humor, lots of stories, and a very large cake. More...

  15. ALS Activity Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Activity Reports Print These hard-copy annual reports were produced from 1993-2006. They illustrated the depth and breadth of the ALS scientific program with a selection of research results. They also summarized operations and ongoing R&D, highlighted educational outreach efforts and special events, and provided yearly documentation of the beamlines and publications. The Activity Report was replaced in 2007 by ALS Spectrum. The reports for 1996-2006 are available here. Activity Report

  16. ALS Postdoctoral Fellowship Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Postdoctoral Fellowship Highlights Print Since its inception in 2005, the ALS Postdoctoral Fellowship program has supported young scientists in new and ongoing research projects at the ALS. In many cases, the postdoctoral fellows were also supported by collaborating institutions. These postdoc "highlights" -listed chronologically-feature a description of their projects while at the ALS, resulting publications, and their current positions and research activities. Name Year/Beamline

  17. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing

  18. ALS Beamlines Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Beamlines Directory ALS Beamlines Directory Print Monday, 31 August 2009 08:16 Beamlines, Parameters, Contact Information, and Schedules Click on the image to see/download a high-resolution version of the ALS beamclock. Beamline Parameters Beamline and endstation technical information is available through the links below. Unless otherwise noted, all beamlines are currently operational. Individual beamline schedules are posted when available. Please contact the responsible beamline scientist

  19. ALS Biosciences Crosscutting Review

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biosciences Crosscutting Review ALS Biosciences Crosscutting Review Print by Steve Kevan and Corie Ralston The ALS organized and recently held a two-day crosscutting review of its bioscience programs. The ALS Scientific Advisory Committee (SAC) sponsors these reviews, which are intended to evaluate the performance of entire research subdisciplines served by the facility and to motivate strategic thinking about capabilities and research directions that are ripe for future development. SAC member

  20. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will

  1. Los Alamos notifies employees, visitors of possible beryllium exposure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Possible beryllium exposure Los Alamos notifies employees, visitors of possible beryllium exposure Current and former Laboratory employees and contractors who either worked at or visited the facility have been-or are in the process of being-notified. January 28, 2009 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to

  2. Highly Asynchronous VisitOr Queue Graph Toolkit

    Energy Science and Technology Software Center (OSTI)

    2012-10-01

    HAVOQGT is a C++ framework that can be used to create highly parallel graph traversal algorithms. The framework stores the graph and algorithmic data structures on external memory that is typically mapped to high performance locally attached NAND FLASH arrays. The framework supports a vertex-centered visitor programming model. The frameworkd has been used to implement breadth first search, connected components, and single source shortest path.

  3. Access to the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gate Access Access to the ALS Print User Access The ALS experiment floor (Building 6) is a Controlled Access Area for radiation protection. All ALS users are required to register with the ALS User Services Office and take safety training (see Complete Safety Training ) before they are issued a Berkeley Lab ID badge and granted access to the facility. Note: Users arriving at the ALS outside registration business hours (Monday-Friday 8:00 a.m.-4:00 p.m.) must notify the User Office in advance and

  4. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R

    2012-10-23

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  5. Organic vapor jet printing system

    DOE Patents [OSTI]

    Forrest, Stephen R.

    2016-05-03

    An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

  6. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme...

  7. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print This year's American Physical Society (APS) Fellows include six scientists from Berkeley Lab, three of whom are...

  8. Takeda Advances Diabetes Drug Development at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Takeda Advances Diabetes Drug Development at the ALS Print Type 2 diabetes mellitus (T2DM), characterized by abnormally high blood glucose levels, affects hundreds of millions of...

  9. ALS Staff Photo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Photo Print On May 14, 2013, members of ALS staff posed for a group photo in front of the dome. A hi-res version can be downloaded here. The last staff photo was taken in 2006. 2013 staff photo

  10. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Doctoral Fellowship in Residence ALS Doctoral Fellowship in Residence Print Monday, 26 July 2010 09:21 The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region.

  11. ALS Activity Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Reports Print These hard-copy annual reports were produced from 1993-2006. They illustrated the depth and breadth of the ALS scientific program with a selection of research results. They also summarized operations and ongoing R&D, highlighted educational outreach efforts and special events, and provided yearly documentation of the beamlines and publications. The Activity Report was replaced in 2007 by ALS Spectrum. The reports for 1996-2006 are available here. Activity Report 2006

  12. ALS Beamlines Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Beamlines Directory Print Beamlines, Parameters, Contact Information, and Schedules Click on the image to see/download a high-resolution version of the ALS beamclock. Beamline Parameters Beamline and endstation technical information is available through the links below. Unless otherwise noted, all beamlines are currently operational. Individual beamline schedules are posted when available. Please contact the responsible beamline scientist for additional schedule information. When calling

  13. ALS in the News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the News Print Recent Articles Featuring ALS Staff and Science 2015 February New Video: Berkeley Lab's "Who We Are" Grants Give Particle Accelerator Technologies a Boost Details on Presidential Budget Request for DOE R&D DOE Scientists Team up to Demonstrate Scientific Potential of Big Data Infrastructure January Timeline Chronicles Lab's Science Highlights in 2014 (...and the ALS is well represented!) New Lithium-Ion Battery Discovery Contradicts Everything You Thought You Knew

  14. ALS Activity Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Reports Print These hard-copy annual reports were produced from 1993-2006. They illustrated the depth and breadth of the ALS scientific program with a selection of research results. They also summarized operations and ongoing R&D, highlighted educational outreach efforts and special events, and provided yearly documentation of the beamlines and publications. The Activity Report was replaced in 2007 by ALS Spectrum. The reports for 1996-2006 are available here. Activity Report 2006

  15. ALS Activity Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Reports Print These hard-copy annual reports were produced from 1993-2006. They illustrated the depth and breadth of the ALS scientific program with a selection of research results. They also summarized operations and ongoing R&D, highlighted educational outreach efforts and special events, and provided yearly documentation of the beamlines and publications. The Activity Report was replaced in 2007 by ALS Spectrum. The reports for 1996-2006 are available here. Activity Report 2006

  16. ALS Beamlines Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Beamlines Directory Print Beamlines, Parameters, Contact Information, and Schedules Click on the image to see/download a high-resolution version of the ALS beamclock. Beamline Parameters Beamline and endstation technical information is available through the links below. Unless otherwise noted, all beamlines are currently operational. Individual beamline schedules are posted when available. Please contact the responsible beamline scientist for additional schedule information. When calling

  17. ALS Beamlines Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Beamlines Directory Print Beamlines, Parameters, Contact Information, and Schedules Click on the image to see/download a high-resolution version of the ALS beamclock. Beamline Parameters Beamline and endstation technical information is available through the links below. Unless otherwise noted, all beamlines are currently operational. Individual beamline schedules are posted when available. Please contact the responsible beamline scientist for additional schedule information. When calling

  18. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Archives Print Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact

  19. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  20. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  1. JLab Registration/International Services - Researcher/Visitor ID

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements Researcher/Visitor ID Requirements CHANGE IN ACCEPTABLE ID DOCUMENTS FOR JLAB ACCESS U.S. Citizens must bring a valid Government issued ID card that contains a photo such as a passport or valid driver's license. Non-driver photo identification cards issued by the Department of Motor Vehicles can be used as proof of identification. Lawful Permanent Resident of the United States must bring their Green Card or passport with valid I-551 stamp AND a valid government issued

  2. ALS Holds Annual Safety Day

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Holds Annual Safety Day ALS Holds Annual Safety Day Print by Scott Taylor, ALS Safety Manager Andrew Doran cleans equipment housing at Beamline 12.2.2. The ALS held its annual safety day on Monday, June 13 for all ALS and associated staff. The day started with an all-hands meeting, beginning with presentations by ALS Director Roger Falcone and LBNL Environmental Health and Safety Division Director (and former ALS Safety Manager) Jim Floyd. Both discussed the importance of the incorporation

  3. ASCR Committees of Visitors | U.S. DOE Office of Science (SC...

    Office of Science (SC) Website

    ASCR Committees of Visitors Advanced Scientific Computing Advisory Committee (ASCAC) ASCAC Home ... The links below provide an archive of Advanced Scientific Computing Research ...

  4. BES Committees of Visitors | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    BES Committees of Visitors Basic Energy Sciences Advisory Committee (BESAC) BESAC Home Meetings BESAC 2016-2017 Membership ChargesReports Charter .pdf file (128KB) BES Committees ...

  5. HEP Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HEPAP Home HEP Committees of Visitors High Energy Physics Advisory Panel (HEPAP) HEPAP Home Meetings 2016 HEPAP Membership ChargesReports Charter .pdf file (44KB) HEP ...

  6. More than 480 visitors from 23 states take site tour during Secret City

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Festival | Y-12 National Security Complex More than 480 visitors from ... More than 480 visitors from 23 states take site tour during Secret City Festival Posted: June 25, 2014 - 8:34am Tours of Y-12 on June 13 brought more than 480 visitors. Y-12 employee and tour guide Bill Wilburn, left, chats with Teresa Neas, and her husband Kim, whose mother, Audeane Bowers-Neas, worked at Y-12 in the 1940s. Tours of Y-12 on June 13 brought more than 480 visitors. Tourists from 23 states and the

  7. Government Printing Office Requirements | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government Printing Office Requirements Government Printing Office Requirements This section describes the Government Printing Office (GPO) requirements for all print materials, whether printed electronically or on paper. This includes requirements for printing and copying for all EERE publications. Approved Printers Executive Order 12873, signed by President Clinton, requires that all government offices and their contractors are required to use GPO-approved printers to print and copy all

  8. Attachment B Visitor Tours at TA-53 TA53-FO-121-001B.4 Preparation Checklist for Visitor Tours at TA-53

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment B Visitor Tours at TA-53 TA53-FO-121-001B.4 Preparation Checklist for Visitor Tours at TA-53 This checklist provides reminders of safety and security considerations in preparation and implementation of tours at TA-53. Tour Date: Purpose of Tour or Tour Title: Tour Host and Z#: State Time and Approximate Duration: Tour Type Check all that apply: Educational Outreach/Student Tour with Minors Large Group Tour Other Tour High Level or Distinguished Work Related Tour Preparation, Visitor

  9. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Collaborative Postdoctoral Fellowship Program Print The Advanced Light Source (ALS) Collaborative Postdoctoral Fellowship program provides challenging opportunities to conduct research and instrument development in areas supporting the scientific programs of the Department of Energy (DOE), Lawrence Berkeley National Laboratory (LBNL), and the ALS that include physical, chemical, material, energy, environmental, geological, and biological sciences. Fellows pursue individual research projects as

  10. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Collaborative Postdoctoral Fellowship Program Print The Advanced Light Source (ALS) Collaborative Postdoctoral Fellowship program provides challenging opportunities to conduct research and instrument development in areas supporting the scientific programs of the Department of Energy (DOE), Lawrence Berkeley National Laboratory (LBNL), and the ALS that include physical, chemical, material, energy, environmental, geological, and biological sciences. Fellows pursue individual research projects as

  11. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Collaborative Postdoctoral Fellowship Program Print The Advanced Light Source (ALS) Collaborative Postdoctoral Fellowship program provides challenging opportunities to conduct research and instrument development in areas supporting the scientific programs of the Department of Energy (DOE), Lawrence Berkeley National Laboratory (LBNL), and the ALS that include physical, chemical, material, energy, environmental, geological, and biological sciences. Fellows pursue individual research projects as

  12. Sintering Kinetics of Inkjet Printed...

    Office of Scientific and Technical Information (OSTI)

    circuits for functional applications envisioned by automotive and aerospace industries. ... Figure 1 illustrates the types of printed line instabilities generally encountered when ...

  13. Multimedia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multimedia Multimedia Print Images Images of the ALS, including outside and inside panoramas, staff, user, and visitor pictures, and scientifc photos, are available for viewing and ...

  14. Multimedia

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Multimedia Print Images Images of the ALS, including outside and inside panoramas, staff, user, and visitor pictures, and scientifc photos, are available for viewing and download ...

  15. Template:PrintPDFButton | Open Energy Information

    Open Energy Info (EERE)

    PrintPDFButton Jump to: navigation, search This is the PrintPDFButton template. It is intended for inclusion on any page where printing the page contents to a PDF is desirable....

  16. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis ALS X-Rays Shine a New Light on Catalysis Print Thursday, 21 May 2015 11:16 Electrocatalysts are responsible for expediting reactions in...

  17. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion ...

  18. Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Six Berkeley Lab (Three ALS) Scientists Are 2012 APS Fellows Print Friday, 07 December 2012 00:00 This year's American...

  19. Data Transfer Considerations for ALS Scientists and Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Transfer Considerations for ALS Scientists and Users Print Introduction Working at the ALS generates huge amounts of data, and for many years this has caused users to have to ...

  20. Summary Slides of ALS Industry Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Print No. Slide Beamline Full Web Highlight ALSNews Volume 17 Takeda Advances Diabetes Research at ALS 5.0.2, 5.0.3 06.02.2015 Vol. 364 16 Metrology for Next-Generation...

  1. Summary Slides of ALS Science Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary Slides of ALS Science Highlights Print No. Slide ... Vol. 356 294 Graphene's 3D Counterpart 10.0.1 ... 06.27.2007 Vol. 277 142 Laser-Seeded CSR 1.4.3 04.25.2007 ...

  2. ALS History: The First 20 Years

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    History: The First 20 Years Print Below is an interactive timeline covering highlights of the first 20 years of ALS history. By no means exhaustive, it is meant to provide a broad ...

  3. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Doctoral Fellowship in Residence Print The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region. The facility welcomes researchers from universities, industries,

  4. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Doctoral Fellowship in Residence Print The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region. The facility welcomes researchers from universities, industries,

  5. ALS Scientific Advisory Committee Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Advisory Committee Charter Print This document was revised and approved December 18, 2008. I. FUNCTION AND REPORTING The ALS Scientific Advisory Committee (SAC) is advisory to the Berkeley Lab Director through the ALS Director. The SAC serves two primary functions: It acts as a "board of directors" to advise the Laboratory on current and future ALS operations, allocation of facility resources, strategic planning, budget development, and other major issues; and It reviews

  6. ALS Scientific Advisory Committee Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientific Advisory Committee Charter Print This document was revised and approved December 18, 2008. I. FUNCTION AND REPORTING The ALS Scientific Advisory Committee (SAC) is advisory to the Berkeley Lab Director through the ALS Director. The SAC serves two primary functions: It acts as a "board of directors" to advise the Laboratory on current and future ALS operations, allocation of facility resources, strategic planning, budget development, and other major issues; and It reviews

  7. Pennsylvania Company Develops Solar Cell Printing Technology

    Broader source: Energy.gov [DOE]

    The technology uses Plextronics’ conductive inks that can be printed by manufacturers worldwide to make solar cells, potentially as easily as they might print a newspaper.

  8. SolarPrint | Open Energy Information

    Open Energy Info (EERE)

    search Name: SolarPrint Place: Dublin, Ireland Sector: Solar Product: Irish solar cell manufacturer. The company developed DSSC technology. References: SolarPrint1 This...

  9. Widget:PrintPDFButton | Open Energy Information

    Open Energy Info (EERE)

    Dependencies Template:PrintPDFButton Usage This Widget assumes the existence of HTML elements created by the PrintPDFButton template, and is called via that template....

  10. SciTech Connect: "3d printing"

    Office of Scientific and Technical Information (OSTI)

    3d printing" Find + Advanced Search Term Search Semantic Search Advanced Search All Fields: "3d printing" Semantic Semantic Term Title: Full Text: Bibliographic Data: Creator ...

  11. printed-circuit heat exchanger PCHE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    printed-circuit heat exchanger PCHE - Sandia Energy Energy Search Icon Sandia Home ... SunShot Grand Challenge: Regional Test Centers printed-circuit heat exchanger PCHE Home...

  12. Printed Module Interconnects

    SciTech Connect (OSTI)

    Stockert, Talysa R.; Fields, Jeremy D.; Pach, Gregory F.; Mauger, Scott A.; van Hest, Maikel F. A. M.

    2015-06-14

    Monolithic interconnects in photovoltaic modules connect adjacent cells in series, and are typically formed sequentially involving multiple deposition and scribing steps. Interconnect widths of 500 um every 10 mm result in 5% dead area, which does not contribute to power generation in an interconnected solar panel. This work expands on previous work that introduced an alternative interconnection method capable of producing interconnect widths less than 100 um. The interconnect is added to the module in a single step after deposition of the photovoltaic stack, eliminating the need for scribe alignment. This alternative method can be used for all types of thin film photovoltaic modules. Voltage addition with copper-indium-gallium-diselenide (CIGS) solar cells using a 2-scribe printed interconnect approach is demonstrated. Additionally, interconnect widths of 250 um are shown.

  13. Public Law 102-392 for Printing | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing (118.61 KB) More Documents & Publications Minutes from the Print ...

  14. ALS Beamlines Directory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Beamlines Directory Print Beamlines, Parameters, Contact Information, and Schedules Click on the image to see/download a high-resolution version of the ALS beamclock. Beamline Parameters Beamline and endstation technical information is available through the links below. Unless otherwise noted, all beamlines are currently operational. Individual beamline schedules are posted when available. Please contact the responsible beamline scientist for additional schedule information. When calling from

  15. Detection of latent prints by Raman imaging

    DOE Patents [OSTI]

    Lewis, Linda Anne; Connatser, Raynella Magdalene; Lewis, Sr., Samuel Arthur

    2011-01-11

    The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

  16. SA 2712-CVC;CONTRACTOR/VISITOR COMPUTERS TEMPORARY ONE TIME EXCEPTION...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This form does not authorize the use of the equipment on any Sandia network. Proper accounts and credentials must be obtained and provided to any visitor requiring network access ...

  17. NP Committees of Visitors | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    The links below provide an archive of Nuclear Physics (NP) Committees of Visitors (COV) reports and responses. 2016 NSAC COV Report on NP Program .pdf file (1.4MB) NP Response to ...

  18. NP Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees of Visitors Nuclear Physics (NP) NP Home About Organization Chart .pdf file (90KB) Staff NP Budget NP Committees of Visitors Directions Jobs Labs & Universities Nuclear Physics Related Brochures Research Facilities Science Highlights Benefits of NP Funding Opportunities Nuclear Science Advisory Committee (NSAC) Community Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301)

  19. WDTS Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees of Visitors Workforce Development for Teachers and Scientists (WDTS) WDTS Home About Organization Chart .pdf file (24KB) WDTS Budget WDTS Committees of Visitors Jobs Science Undergraduate Laboratory Internships (SULI) Community College Internships (CCI) Visiting Faculty Program (VFP) at DOE Laboratories DOE Office of Science Graduate Student Research (SCGSR) Program Albert Einstein Distinguished Educator Fellowship (AEF) Program DOE National Science Bowl® (NSB) STEM Resources

  20. FES Committees of Visitors | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Committees of Visitors Fusion Energy Sciences (FES) FES Home About Organization Chart .pdf file (113KB) Staff FES Budget FES Committees of Visitors Directions Jobs Fusion and Plasmas Research Facilities Science Highlights Benefits of FES Funding Opportunities Fusion Energy Sciences Advisory Committee (FESAC) Community Resources Contact Information Fusion Energy Sciences U.S. Department of Energy SC-24/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-4941 F: (301)

  1. Inkjet Printed Metallizations for Cu(In1-xGax)Se2 Photovoltaic Cells

    SciTech Connect (OSTI)

    Hersh, P. A.; Curtis, C. J.; van Hest, M. F. A. M.; Kreuder, J. J.; Pasquarelli, R.; Miednaer, A.; Ginley, D. S.

    2011-12-01

    This study reports the inkjet printing of Ag front contacts on Aluminum doped Zinc Oxide (AZO)/intrinsic Zinc Oxide (i-ZnO)/CdS/Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (CIGS)/Mo thin film photovoltaic cells. The printed Ag contacts are being developed to replace the currently employed evaporated Ni/Al bi-layer contacts. Inkjet deposition conditions were optimized to reduce line resistivity and reduce contact resistance to the Al:ZnO layer. Ag lines printed at a substrate temperature of 200 C showed a line resistivity of 2.06 {mu}{Omega} {center_dot} cm and a contact resistance to Al:ZnO of 8.2 {+-} 0.2 m{Omega} {center_dot} cm{sup 2} compared to 6.93 {+-} 0.3 m{Omega} {center_dot} cm{sup 2} for thermally evaporated contacts. These deposition conditions were used to deposit front contacts onto high quality CIGS thin film photovoltaic cells. The heating required to print the Ag contacts caused the performance to degrade compared to similar devices with evaporated Ni/Al contacts that were not heated. Devices with inkjet printed contacts showed 11.4% conversion efficiency compared to 14.8% with evaporated contacts. Strategies to minimize heating, which is detrimental for efficiency, during inkjet printing are proposed.

  2. How Do I Bring and Use Electrical Equipment at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bring and Use Electrical Equipment at the ALS? Print Testing All electrical equipment must meet minimum electrical safety requirements. Whenever possible, we rely on third party...

  3. Add your e-prints to the E-print Network -- Energy, science,...

    Office of Scientific and Technical Information (OSTI)

    Add E-prints: eprintshelp@osti.gov We invite you to submit your e-prints to the network. Having your e-prints in the network increases awareness of them and promotes the ...

  4. Data Management at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Management at the ALS Print Users of the ALS are responsible for meeting their data management obligations to their home institutions and granting agencies. Except as noted below for data stored at NERSC, the ALS does not provide specific resources to manage data that are generated through user experiments. Because the ALS does not have a facility-wide data archiving service or staff to manage the data, the user must generally make arrangements to copy data to their own storage systems or

  5. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Doctoral Fellowship in Residence Print The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region. The facility welcomes researchers from universities, industries, and

  6. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Doctoral Fellowship in Residence Print The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region. The facility welcomes researchers from universities, industries, and

  7. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Doctoral Fellowship in Residence Print The Advanced Light Source (ALS), a division of Lawrence Berkeley National Laboratory, is a national user facility that generates intense x-ray radiation for scientific and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and excellent performance into the hard x-ray region. The facility welcomes researchers from universities, industries, and

  8. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory ALS Evidence Confirms Combustion Theory Print Wednesday, 22 October 2014 11:43 Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In

  9. Minutes from the March 14, 2013 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. ...

  10. The United States Code - Printing, Title 44 Excerpts | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts The United States Code - Printing, Title 44 Excerpts PDF icon The United ...

  11. Minutes from the Print and Mail Managers Exchange Forum Teleconference...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail...

  12. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  13. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  14. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  15. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  16. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  17. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  18. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain an understanding of why that happens, researchers have developed at the ALS a miniature

  19. High resolution printing of charge

    DOE Patents [OSTI]

    Rogers, John; Park, Jang-Ung

    2015-06-16

    Provided are methods of printing a pattern of charge on a substrate surface, such as by electrohydrodynamic (e-jet) printing. The methods relate to providing a nozzle containing a printable fluid, providing a substrate having a substrate surface and generating from the nozzle an ejected printable fluid containing net charge. The ejected printable fluid containing net charge is directed to the substrate surface, wherein the net charge does not substantially degrade and the net charge retained on the substrate surface. Also provided are functional devices made by any of the disclosed methods.

  20. U.S. Department of Energy Solar Decathlon Visitors Guide 2015

    SciTech Connect (OSTI)

    2015-09-03

    The U.S. Department of Energy 2015 Visitors Guide is a free, hard-copy publication distributed free to those attending the Solar Decathlon event. The publications' objectives are to serve as the primary information resource for those in attendance, and to deliver a compelling message about the Solar Decathlon's success as a proven workforce development program and its role in educating students and the public about clean energy products and design solutions. The U.S. Department of Energy 2015 Visitors Guide SD15 Visitors Guide goals are to guide attendees through the Solar Decathlon village; List and explain the 10 contests; educate attendees about the participating teams and their competition houses; provide access to more information on the Solar Decathlon website through the use of QR codes; and acknowledge the support of all event sponsors.

  1. Y-12 has almost 500 visitors from 23 states tour site during Secret City

    National Nuclear Security Administration (NNSA)

    Festival | National Nuclear Security Administration | (NNSA) has almost 500 visitors from 23 states tour site during Secret City Festival Wednesday, June 25, 2014 - 3:34pm NNSA Blog B&W Y-12 employee and tour guide Bill Wilburn, left, chats with Teresa Neas, and her husband Kim, whose mother, Audeane Bowers-Neas, worked at Y-12 in the 1940s. Tours of Y-12 on June 13 brought almost 500 visitors. Tourists from 23 states and the District of Columbia toured the site as part of Oak Ridge's

  2. Scientists at ALS Find New Path to More Efficient Organic Solar...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Scientists at ALS Find New Path to More Efficient Organic Solar Cells Scientists at ALS Find New Path to More Efficient Organic Solar Cells Print Monday, 07 January 2013 00:00 ...

  3. Takeda Advances Diabetes Drug Development at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advances Diabetes Drug Development at the ALS Print Tuesday, 19 May 2015 12:25 Type 2 diabetes mellitus (T2DM), characterized by abnormally high blood glucose levels, affects...

  4. IBM Probes Material Capabilities at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Probes Material Capabilities at the ALS IBM Probes Material Capabilities at the ALS Print Wednesday, 12 February 2014 11:05 Vanadium dioxide, one of the few known materials that acts like an insulator at low temperatures but like a metal at warmer temperatures, is a somewhat futuristic material that could yield faster and much more energy-efficient electronic devices. Researchers from IBM's forward-thinking Spintronic Science and Applications Center (SpinAps) recently used the ALS to gain

  5. IBM Probes Material Capabilities at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IBM Probes Material Capabilities at the ALS IBM Probes Material Capabilities at the ALS Print Wednesday, 12 February 2014 11:05 Vanadium dioxide, one of the few known materials that acts like an insulator at low temperatures but like a metal at warmer temperatures, is a somewhat futuristic material that could yield faster and much more energy-efficient electronic devices. Researchers from IBM's forward-thinking Spintronic Science and Applications Center (SpinAps) recently used the ALS to gain

  6. Heat sinking for printed circuitry

    DOE Patents [OSTI]

    Wilson, S.K.; Richardson, G.; Pinkerton, A.L.

    1984-09-11

    A flat pak or other solid-state device mounted on a printed circuit board directly over a hole extends therethrough so that the bottom of the pak or device extends beyond the bottom of the circuit board. A heat sink disposed beneath the circuit board contacts the bottom of the pak or device and provides direct heat sinking thereto. Pressure may be applied to the top of the pak or device to assure good mechanical and thermal contact with the heat sink.

  7. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In addition, the results could have implications for the burgeoning field of

  8. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In addition, the results could have implications for the burgeoning field of

  9. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In addition, the results could have implications for the burgeoning field of

  10. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In addition, the results could have implications for the burgeoning field of

  11. ALS Evidence Confirms Combustion Theory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Evidence Confirms Combustion Theory Print Researchers recently uncovered the first step in the process that transforms gas-phase molecules into solid particles like soot and other carbon-based compounds. It's a discovery that could help combustion chemists make more efficient, less polluting fuels and help materials scientists fine-tune their carbon nanotubes and graphene sheets for faster, smaller electronics. In addition, the results could have implications for the burgeoning field of

  12. Mac OS X Printing with LPD

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mac OS X Printing with LPD Last Modified by Jerry Camuso, 02/12/2015. 1 . From the "System Preferences", click on "Print & Fax" 2 . Click on "+" sign to add a new printer 3. Use "IP Printer" and select or type the following: Protocol: Line Printer Daemon - LPD Address: printserv.slac.stanford.edu Queue: Your print queue name from SLAC printserv. PLEASE NOTE: this information can be found at the bottom of this document Under "SSRL beamline print

  13. Toppan Printing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Jump to: navigation, search Name: Toppan Printing Co Ltd Place: Tokyo, Tokyo, Japan Zip: 101-0024 Product: Japanese manufacturer of PV module backsheets. Coordinates:...

  14. Federal Sustainable Print Management - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G 436.1-1, Federal Sustainable Print Management by Jake Wooley The Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by ...

  15. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

    1991-08-27

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

  16. Printed circuit dispersive transmission line

    DOE Patents [OSTI]

    Ikezi, Hiroyuki; Lin-Liu, Yuh-Ren; DeGrassie, John S.

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  17. Processing A Printed Wiring Board By Single Bath Electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P. (Oakland, CA); Steffani, Christopher P. (Livermore, CA); Gonfiotti, Ray A. (Livermore, CA)

    2003-04-15

    A method of processing a printed wiring board by single bath electrodeposition. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from the bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  18. Processing a printed wiring board by single bath electrodeposition

    DOE Patents [OSTI]

    Meltzer, Michael P.; Steffani, Christopher P.; Gonfiotti, Ray A.

    2010-12-07

    A method of processing a printed wiring board. Initial processing steps are implemented on the printed wiring board. Copper is plated on the printed wiring board from a bath containing nickel and copper. Nickel is plated on the printed wiring board from a bath containing nickel and copper and final processing steps are implemented on the printed wiring board.

  19. Print

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    water vapor. - For more information on CMBE: http:science.arm.govwgcpmscmbestestimate.html GFDL GCM models used in this comparison - AM2.1: current version of the...

  20. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energtica. Desenchufa los cargadores cuando no estn en uso. Usa luz natural, calor del ...

  1. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    maneras fciles de usar energa en forma inteligente Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energtica. Desenchufa los cargadores...

  2. ALS 20th Anniversary Celebration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20th Anniversary Celebration Print The 20th anniversary of the ALS was celebrated on Friday, October 4, with style, good humor, lots of stories, and a very large cake. More important, however, was the large number of current and former colleagues and users, who were delighted to have the opportunity to visit and catch up with former workmates. When not chatting with colleagues or listening to the high-shool chamber trio, attendees were entertained by a video montage, old photos featuring ALS

  3. ALS@20

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tribulations encountered during the construction of the ALS from former Director Jay Marx, current ALS Scientific Director Steve Kevan and Director Roger Falcone talked about...

  4. E-print Network : Main View : Deep Federated Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    javascript. Home About Contact Us Help E-print Network Search Powered By Deep Web Technologies New Search Preferences E-print Network E-print Network Skip to main content FAQ *...

  5. Template:PrintFullVersionButton | Open Energy Information

    Open Energy Info (EERE)

    PrintFullVersionButton Jump to: navigation, search This is the PrintFullVersionButton template. It is intended for inclusion on any page where the printing of a superset of pages...

  6. Printing a Car: A Team Effort in Innovation (Text Version) |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing a Car: A Team Effort in Innovation (Text Version) Printing a Car: A Team Effort in Innovation (Text Version) Below is the text version of the video Printing a Car: A Team ...

  7. Minutes from the March 17, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-eight individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial Printing Report "JCP Form

  8. Minutes from the May 26, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP

  9. Data Transfer Considerations for ALS Scientists and Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Transfer Considerations for ALS Scientists and Users Print Introduction Working at the ALS generates huge amounts of data, and for many years this has caused users to have to carry hard drives and USB drives between the ALS and their home institutions for acquisition and analysis of experimental data. To avoid the physical transport of data and to make real-time analysis possible, staff at the ALS, ESnet, and Berkeley Lab's IT Division have collaborated to implement several best practices

  10. Data Transfer Considerations for ALS Scientists and Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Transfer Considerations for ALS Scientists and Users Print Introduction Working at the ALS generates huge amounts of data, and for many years this has caused users to have to carry hard drives and USB drives between the ALS and their home institutions for acquisition and analysis of experimental data. To avoid the physical transport of data and to make real-time analysis possible, staff at the ALS, ESnet, and Berkeley Lab's IT Division have collaborated to implement several best practices

  11. Ringleader: Cobber Lam, ALS Systems Administrator

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cobber Lam, ALS Systems Administrator Print Cobber Lam started working at Berkeley Lab 10 years ago as a student assistant, while attending college at Cal State East Bay. Within two months, he was assigned to the ALS and has stayed put ever since. He used to be matrixed via IT, but last year he became a direct ALS employee. ALS IT support is divided between Lam and Tim Kellogg, with Lam being more forward-facing, dealing with users and staff, and Kellogg working on the back-end mostly with

  12. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter ALS Reveals New State of Matter Print Wednesday, 13 October 2010 00:00 ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have

  13. Minutes from the February 23, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing and Publishing Activities Three-Year Plan (2013-2015). Dallas Woodruff, Headquarters, informed the group that the Department-wide Printing and Publishing Activities ...

  14. Minutes from the November 01, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing discussion Discussed the question of how the 3-year plan correlates to a quarterly printing and publishing activities report. The quarterly report does not exist. We ...

  15. Minutes from the October 26, 2011 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing Agenda Items...... Printing and Publishing Activities Report "Three-Year Plan: Dallas Woodruff, Headquarters informed the group that all Three-Year Plan files have been ...

  16. Minutes from the January 20, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff, Headquarters thanked the group for their ...

  17. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing Addthis Description Innovation in the design ...

  18. Unitech Printed Circuit Board Corp UPCB | Open Energy Information

    Open Energy Info (EERE)

    Sector: Solar Product: Taiwan-based printed-circuit board maker with intent to enter into solar cell manufacturing industry. References: Unitech Printed Circuit Board Corp....

  19. Transfer Printed Microcells with Micro-Optic Concentrators for...

    Office of Scientific and Technical Information (OSTI)

    Transfer Printed Microcells with Micro-Optic Concentrators for Low Cost, High Performance Photovoltaic Modules Citation Details In-Document Search Title: Transfer Printed...

  20. How We 3D-Print Aerogel

    SciTech Connect (OSTI)

    2015-04-23

    A new type of graphene aerogel will make for better energy storage, sensors, nanoelectronics, catalysis and separations. Lawrence Livermore National Laboratory researchers have made graphene aerogel microlattices with an engineered architecture via a 3D printing technique known as direct ink writing. The research appears in the April 22 edition of the journal, Nature Communications. The 3D printed graphene aerogels have high surface area, excellent electrical conductivity, are lightweight, have mechanical stiffness and exhibit supercompressibility (up to 90 percent compressive strain). In addition, the 3D printed graphene aerogel microlattices show an order of magnitude improvement over bulk graphene materials and much better mass transport.

  1. Aluminum plasmonic metamaterials for structural color printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-05-26

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  2. World's First 3-D Printed Car | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    World's First 3-D Printed Car World's First 3-D Printed Car Addthis Description The video is about a partnership between Local Motors and Oak Ridge National Laboratory to print the world's first 3-D printed car-the Strati-at the 2014 International Manufacturing Technology Show

  3. E-print Network Alert Service

    Office of Scientific and Technical Information (OSTI)

    Website Policies and Important Links E-print Web Log alert image About Search Browse by ... and engineering databases and Web sites, based on a search profile you submit to us. ...

  4. E-print Network : User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

  5. Minutes from the January 19, 2011 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence

  6. Minutes from the July 21, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    July 21, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Government Printing Office revisions to the Standard Form one (SF!), Twenty-five

  7. Field Facilities Contacts for Printing and Mail | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Field Facilities Contacts for Printing and Mail Field Facilities Contacts for Printing and Mail This is the list of DOE field facilities contacts for Printing and Mail as of April 27, 2011. Go to Mail Services Go to Printing Services Field_Facilities_Contacts_Print-Mail.pdf (74.45 KB) More Documents & Publications Director's Perspective by George Miller Tenant Education and Training Fire Safety Committee Membership List

  8. Minutes from the Print and Mail Managers Exchange Forum Teleconferences |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences. Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions. Last updated 01/30/14 Minutes from the November 21, 2013 Printing and Mail Teleconference (8.88 KB) Minutes from the September 19, 2013 Printing and Mail

  9. April 27, 2015-Special ALS Colloquium

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 27, 2015-Special ALS Colloquium April 27, 2015-Special ALS Colloquium Print Wednesday, 22 April 2015 13:19 Special Event on Monday, April 27 @ 12 noon, USB 15-253 X-Ray Microscopy: The First 120 Years Janos Kirz, ALS Abstract Röntgen's great discovery became an instant public sensation. Fascination with the "new kind of rays" that could reveal the structure of opaque objects swept the world in 1896. Fifty years later it was widely recognized that the short wavelength of the

  10. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  11. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  12. Summary Slides of ALS Industry Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry Highlights Print No. Slide Beamline Full Web Highlight ALSNews Volume 19 HP Gains Insight with Innovative ALS Tools 11.0.2, 5.3.2.2 05.11.2016 Vol. 372 18 Collaboration Produces World's Best Metrology Tool 6.1.2 01.27.2016 Vol. 369 17 Takeda Advances Diabetes Research at ALS 5.0.2, 5.0.3 06.02.2015 Vol. 364 16 Metrology for Next-Generation Nanopatterning 7.3.3, 11.0.1 01.28.2015 Vol. 360 15 Caribou Biosciences Has Roots at ALS - 09.24.2014 Vol. 357 13 Lithium-Battery Dendrite Growth: A

  13. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  14. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  15. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  16. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  17. ALS Reveals New State of Matter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Reveals New State of Matter Print ALS user groups from Princeton and Stanford have been making waves this past year with several high-profile papers and extensive news coverage of their work on a new state of matter embodied by "topological insulators," materials that conduct electricity only on their surfaces. First identified at the ALS in 2007 by a Princeton team led by M. Zahid Hasan, topological insulators have been the subject of intense interest, based on unusual quantum

  18. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Wild 2 Viewed by ALS Microscopes Print NASA's 200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81PWild...

  19. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use ... If You Are Bringing a Laser For lasers of Class 3a3R or less, there are no specific ...

  20. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81PWild 2 Viewed by ALS Microscopes Print NASA's 200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the...

  1. Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools Print Thursday, 05 May 2016 11:21 For the past eight years, Hewlett Packard Labs, the central research organization of Hewlett Packard Enterprise (HPE), has been using cutting-edge ALS techniques to advance some of their most promising technological research. Hewlett Packard Labs researchers, including Suhas Kumar, Catherine Graves, and John Paul Strachan,

  2. Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hewlett Packard Labs Gains Insights with Innovative ALS Research Tools Print For the past eight years, Hewlett Packard Labs, the central research organization of Hewlett Packard Enterprise (HPE), has been using cutting-edge ALS techniques to advance some of their most promising technological research. Hewlett Packard Labs researchers, including Suhas Kumar, Catherine Graves, and John Paul Strachan, recently made the cover of Applied Physics Letters with an ALS-based project that revealed key

  3. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems New ALS Technique Gives Nanoscale Views of Complex Systems Print Wednesday, 28 May 2014 00:00 Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks

  4. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like ALS Capabilities Reveal How Like Can Attract Like Print Wednesday, 26 March 2014 00:00 A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can

  5. High Energy Theory Workshops and Visitors at the Michigan Center for Theoretical Physics FY15

    SciTech Connect (OSTI)

    Pierce, Aaron T.

    2015-09-18

    The String theory workshop was held from March 4-7, 2015 on the University of Michigan campus. Local organizers were Gordon Kane and Aaron Pierce. Piyush Kumar (Yale), Jim Halverson (KITP), Bobby Acharya (ICTP) and Sven Krippendorf (Oxford) served as external organizers.The meeting focused on the status of work to project 10 or 11 dimensional string/M theories onto our 4 spacetime dimensions (compactification). The workshop had 31 participants, half from outside the U.S. Participants were encouraged to focus on predictions for recent and forthcoming data, particularly for Higgs physics and LHC and dark matter, rather than on the traditional approach of embedding the Standard Model particles and forces. The Higgs boson sympoosium was locally organized by James Wells (chair), Aaron Pierce and Jianming Qian. Additional input in the early stages by Stefan Pokorski (Warsaw) who was unable to attend in the end. The workshop consistent of 22 talks from experts around the world, both theoretical and experimental. Experimentalists summarized the current state of knowledge of the Higgs boson and its varients. The theory talks ranged from technical calculations of Standard Model processes to speculative novel ideas. The YHET visitor program invited weekly young visitors to the University of Michigan campus to present their work. This year 24 participants came under the program, with 17 of them receiving at least partial support for their visits.

  6. High Energy Theory Workshops and Visitors at the Michigan Center for Theoretical Physics FY14

    SciTech Connect (OSTI)

    Pierce, Aaron T.

    2014-04-01

    The workshop was held from September 23-25, 2013 on the University of Michigan campus. Local organizers were Dragan Huterer, Katherine Freese, and Heidi Wu (University of Michigan). Marilena Lo Verde (University of Chicago) also served as an external organizer. This workshop sought to gather experimentalists and theorists to discuss and define directions in cosmology research after the 1st year release of Planck data. The workshop included 35 invited (non-U-M) cosmologists, most of them relatively junior. The workshop was notable for spirited discussion of various theoretical ideas and experimental developments, and particularly on how one could test theory with ongoing and future experiments. In our follow-up poll, 95% of participants reported that interactions with other participants at the workshop may lead to further collaboration. Most participants (again about 95%) reported that they are very satisfied with the quality of the program, information they received, and the logistical support. Slides are available on line at: http://www.umich.edu/~mctp/SciPrgPgs/events/2013/CAP13/program.html. The YHET visitor program invited weekly young visitors to the University of Michigan campus to present their work. This year 23 participants came under the program. Slides are available on line for talks when applicable: http://mctp.physics.lsa.umich.edu/brown-bag-seminar-history/winter 2014 and http://mctp.physics.lsa.umich.edu/brown-bag-seminar-history/fall-2013.

  7. Nozzle geometry for organic vapor jet printing

    DOE Patents [OSTI]

    Forrest, Stephen R; McGraw, Gregory

    2015-01-13

    A first device is provided. The device includes a print head. The print head further includes a first nozzle hermetically sealed to a first source of gas. The first nozzle has an aperture having a smallest dimension of 0.5 to 500 microns in a direction perpendicular to a flow direction of the first nozzle. At a distance from the aperture into the first nozzle that is 5 times the smallest dimension of the aperture of the first nozzle, the smallest dimension perpendicular to the flow direction is at least twice the smallest dimension of the aperture of the first nozzle.

  8. THREE-DIMENSIONAL PRINTING IS BLOWING UP.

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    THIS IS A COPY OF THE EXECUTED DOCUMENT THIS IS A COPY OF THE EXECUTED DOCUMENT THIS IS A COPY OF THE EXECUTED DOCUMENT THIS IS A COPY OF THE EXECUTED DOCUMENT

    March 2016 THREE-DIMENSIONAL PRINTING IS BLOWING UP. From the obvious-hand tools and chess pieces-to the less obvious-body parts and shelf-stable food-just about every item imaginable is being subjected to the two-step process of digitization and fabrication that is 3D printing. One of the factors fueling the

  9. Visitor center at the Antelope Valley California Poppy Reserve, Lancaster, California

    SciTech Connect (OSTI)

    Colyer, R.D.; Freeman, S.P.

    1981-01-01

    The Antelope Valley California Poppy Reserve contains the largest remaining stand of the California Poppy (Eschschozia Californica), the state flower of California. To welcome the thousands of people viewing the desert wildflowers each spring, the State of California decided to build a visitor/interpretive center. This building deals primarily with the question of fit; a building's fit aesthetically with its site and the fit of a building's design response to the climate of the site. In this case, both aspects of this question led the client and architects to seek an earth sheltered solution using materials at least metaphorically indigenous to the region. On both a technical and formal level, this building seeks to fit the unique climate and historical heritage of its site.

  10. Dai Nippon Printing Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Dai Nippon Printing Co Ltd Place: Shinjuku-ku, Tokyo, Japan Zip: 162-8001 Sector: Solar Product: Print conglomerate which is involved with...

  11. E-print Network Alerts -- Energy, science, and technology for...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  12. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing A screenshot of the cover of the 3D blade ...

  13. Novel 3-D Printed Inverters for Electric Vehicles Can Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April...

  14. Gas cushion control of OVJP print head position

    DOE Patents [OSTI]

    Forrest, Stephen R

    2014-10-07

    An OVJP apparatus and method for applying organic vapor or other flowable material to a substrate using a printing head mechanism in which the print head spacing from the substrate is controllable using a cushion of air or other gas applied between the print head and substrate. The print head is mounted for translational movement towards and away from the substrate and is biased toward the substrate by springs or other means. A gas cushion feed assembly supplies a gas under pressure between the print head and substrate which opposes the biasing of the print head toward the substrate so as to form a space between the print head and substrate. By controlling the pressure of gas supplied, the print head separation from the substrate can be precisely controlled.

  15. Department of Energy Strategic Plan, May 2011, Print Quality | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Department of Energy Strategic Plan, May 2011, Print Quality Department of Energy Strategic Plan, May 2011, Print Quality Posted here are publication materials related to the Department of Energy's Strategic Plan of 2011. DOE_2011-Strategic-Plan_High-Resolution_Print-Quality is a full-data, high-resolution version of the document. This will print/reproduce with the maximum resolution available from your output device (printer). This is a 15.7 Mb file.

  16. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print Wednesday, 31 October 2012 00:00 The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film

  17. Wind Turbine Manufacturing Transforms with Three-Dimensional Printing |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Turbine Manufacturing Transforms with Three-Dimensional Printing Wind Turbine Manufacturing Transforms with Three-Dimensional Printing May 19, 2016 - 12:57pm Addthis From medical devices to airplane components, three-dimensional (3-D) printing (also called additive manufacturing) is transforming the manufacturing industry. Now, research that supports the Energy Department's Atmosphere to Electrons (A2e) initiative is applying 3-D-printing processes to create wind turbine

  18. Promising Magnesium Battery Research at ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Promising Magnesium Battery Research at ALS Promising Magnesium Battery Research at ALS Print Wednesday, 23 January 2013 16:59 toyota battery a) Cross-section of the in situ electrochemical/XAS cell with annotations. b) Drawing and c) photograph of the assembled cell. Alternatives to the current lithium-ion-based car batteries are at the forefront of the automotive industry's research agenda-manufacturers want to build cars with longer battery life, and to do that they're going to have to find

  19. Caribou Biosciences Has Roots at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Caribou Biosciences Has Roots at the ALS Caribou Biosciences Has Roots at the ALS Print Monday, 15 September 2014 11:01 When Rachel Haurwitz joined UC Berkeley biology professor Jennifer Doudna's lab in 2007 as a graduate student, little did the two women know that the interesting bacterial immune system they were studying would be the subject of news headlines and the basis for a biotech startup just a few years later. It turned out that the bacterial immune system they were studying, known as

  20. ALS Ceramics Materials Research Advances Engine Performance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Ceramics Materials Research Advances Engine Performance Print ritchie ceramics This 3D image of a ceramic composite specimen imaged under load at 1750C shows the detailed fracture patterns that researchers are able to view using ALS Beamline 8.3.2. The vertical white lines are the individual silicon carbide fibers in this sample about 500 microns in diameter. LBNL senior materials scientist and U.C. Berkeley professor Rob Ritchie has been researching the fracture behavior of a wide array of

  1. ALS History: The First 20 Years

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    History: The First 20 Years Print Below is an interactive timeline covering highlights of the first 20 years of ALS history. By no means exhaustive, it is meant to provide a broad overview of the people and events that have helped shape the ALS as well as a sense of the breadth of the science that has been done here. Click on items to see more detail. Slide the blue rectangle at bottom to move forward or backward in time. Color Key: Science Highlights (green); People and Events (orange);

  2. ALS in the News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    techniques.) (Images by Lomvardas lab) Searching for the Solar System's Chemical Recipe Print Wednesday, 20 February 2013 00:00 The ratio of isotopes in elements like oxygen,...

  3. ALS-U Update: BESAC Announces Results of Facility Upgrade Prioritization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS-U Update: BESAC Announces Results of Facility Upgrade Prioritization ALS-U Update: BESAC Announces Results of Facility Upgrade Prioritization Print by Dave Robin, on behalf of the ALS-U Project Development Team On Thursday, June 9, DOE's Basic Energy Sciences Advisory Committee (BESAC) released the recommendations of the BES Facility Upgrade Prioritization Subcommittee. I'm pleased to announce that the subcommittee (whose full report can be found here) considers the proposed ALS-U project

  4. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  5. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  6. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  7. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  8. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function. Scientists typically expect that a protein has a singular structure (with some conformational variation), and that when an experimental structure is solved, it can used to understand the known biological function(s) of the protein. Recently, researchers used beamline capabilities at the ALS to demonstrate that a

  9. ALS Gives Chevron Scientists New Insights into Corrosion Resistance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Gives Chevron Scientists New Insights into Corrosion Resistance ALS Gives Chevron Scientists New Insights into Corrosion Resistance Print Thursday, 25 July 2013 13:44 In the chemical environments common in energy production plants, steel pipes and equipment can accumulate layers of iron sulfide, some of which are corrosion resistant and provide protection to the steel surface. Understanding how operating conditions affect steel surface layers can improve corrosion rate estimates, decreasing

  10. ALS Scientists Patent Technique To Dramatically Advance Grating-Based

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spectroscopy ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy Print Tuesday, 29 January 2013 16:28 Gratings - optical elements used to separate light in spectroscopy applications - have been in use since the early 19th century. Developments in the late 19th century led to the manufacture of gratings by highly precise ruling with a diamond onto a metallic surface. Many gratings

  11. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant energy density if their graphite anodes were replaced with lithium metal anodes. But there's a major concern with substituting lithium-when the battery cycles, microscopic fibers of the lithium anodes ("dendrites")

  12. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  13. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  14. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  15. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  16. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  17. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems Print Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks inside the mesoscale realm with unprecedented sensitivity and range. The new technique,

  18. Takeda Advances Diabetes Drug Development at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Takeda Advances Diabetes Drug Development at the ALS Takeda Advances Diabetes Drug Development at the ALS Print Tuesday, 19 May 2015 12:25 Type 2 diabetes mellitus (T2DM), characterized by abnormally high blood glucose levels, affects hundreds of millions of people worldwide. In the pursuit to better treat this disease, the human receptor protein GPR40 has been identified by pharmaceutical company Takeda as a potential new drug target. To this end, TAK-875 (fasiglifam), a partial agonist of

  19. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  20. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  1. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  2. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  3. ALS Capabilities Reveal How Like Can Attract Like

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal How Like Can Attract Like Print A Berkeley Lab research team working at the ALS has observed an unusual pairing that seems to go against a universal scientific truth-that opposite charges attract and like charges repel. Led by Berkeley Lab chemist Richard Saykally and theorist David Prendergast, researchers demonstrated that, when hydrated in water, positively charged ions (cations) can actually pair up with one another. A New Law of Water Affinities Late 19th century

  4. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function. Scientists typically expect that a protein has a singular structure (with some conformational variation), and that when an experimental structure is solved, it can used to understand the known biological function(s) of the protein. Recently, researchers used beamline capabilities at the ALS to demonstrate that a

  5. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function. Scientists typically expect that a protein has a singular structure (with some conformational variation), and that when an experimental structure is solved, it can used to understand the known biological function(s) of the protein. Recently, researchers used beamline capabilities at the ALS to demonstrate that a

  6. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function. Scientists typically expect that a protein has a singular structure (with some conformational variation), and that when an experimental structure is solved, it can used to understand the known biological function(s) of the protein. Recently, researchers used beamline capabilities at the ALS to demonstrate that a

  7. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Capabilities Reveal Multiple Functions of Ebola Virus ALS Capabilities Reveal Multiple Functions of Ebola Virus Print Friday, 13 June 2014 10:25 A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function. Scientists typically expect that a protein has a singular structure (with some conformational variation), and that when an experimental structure is solved, it can used to understand the known biological function(s) of the

  8. ALS Scientists Patent Technique To Dramatically Advance Grating-Based

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Spectroscopy ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy ALS Scientists Patent Technique To Dramatically Advance Grating-Based Spectroscopy Print Gratings - optical elements used to separate light in spectroscopy applications - have been in use since the early 19th century. Developments in the late 19th century led to the manufacture of gratings by highly precise ruling with a diamond onto a metallic surface. Many gratings are still produced today using

  9. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  10. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  11. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  12. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis Print Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab researchers used x-rays at the ALS in a novel way to observe the behavior of

  13. ALS X-Rays Shine a New Light on Catalysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS X-Rays Shine a New Light on Catalysis ALS X-Rays Shine a New Light on Catalysis Print Thursday, 21 May 2015 11:16 Electrocatalysts are responsible for expediting reactions in many promising renewable energy technologies. However, the extreme sensitivity of their surface redox states to temperatures, to gas pressures, and to electrochemical reaction conditions renders them difficult to investigate by conventional surface-science techniques. Recently a team of Stanford and Berkeley Lab

  14. A Docking Casette For Printed Circuit Boards

    DOE Patents [OSTI]

    Barringer, Dennis R. (Wallkill, NY); Seminaro, Edward J. (Milton, NY); Toffler, Harold M. (Newburgh, NY)

    2003-08-19

    A docking apparatus for printed circuit boards including a cassette housing, having a housing base, a housing cover and a housing wall, wherein the housing base and the housing wall are disposed relative to each other so as to define a housing cavity for containing a printed circuit board and wherein the housing wall includes a cable opening disposed so as to be communicated with the housing cavity, a linkage mechanism, wherein the linkage mechanism includes an engagement configuration and a disengagement configuration and wherein the linkage mechanism is disposed so as to be associated with the cassette housing and a housing bezel, wherein the housing bezel is disposed relative to the cassette housing so as to be associated with the cable opening.

  15. Solar paint: From synthesis to printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Xiaojing; Belcher, Warwick; Dastoor, Paul

    2014-11-13

    Water-based polymer nanoparticle dispersions (solar paint) offer the prospect of addressing two of the main challenges associated with printing large area organic photovoltaic devices; namely, how to control the nanoscale architecture of the active layer and eliminate the need for hazardous organic solvents during device fabrication. We review progress in the field of nanoparticulate organic photovoltaic (NPOPV) devices and future prospects for large-scale manufacturing of solar cells based on this technology.

  16. Rework of parylene coated printed wiring assemblies

    SciTech Connect (OSTI)

    Williams, J.O.

    1991-04-01

    This document describes the recommended method for reworking parylene coated Printed Wiring Assemblies (PWAs). Special training is required to successfully rework PWAs that are parylene coated. Parylene coating rework should not be attempted on production units unless successful parylene coating removal has been completed on non-production assemblies. The rework procedures described in this document are recommended for normal parylene rework. Special situations may dictate slight deviation from the methods described herein. 4 figs.

  17. Solar space heating for the visitors' center, Stephens College, Columbia, Missouri. Final report

    SciTech Connect (OSTI)

    Henley, Marion

    1980-06-01

    This document is the final report of the solar energy system located at the Visitors' Center on the Stephens College Campus, Columbia, Missouri. The system is installed in a four-story, 15,000 square foot building designed to include the college's Admission Office, nine guest rooms for overnight lodging for official guests of the college, a two-story art gallery, and a Faculty Lounge. The solar energy system is an integral design of the building and utilizes 176 Honeywell/Lennox hydronic flat-plate collectors which use a 50% water-ethylene glycol solution and water-to-water heat exchanger. Solar heated water is stored in a 5000 gallon water storage tank located in the basement equipment room. A natural gas fired hot water boiler supplies hot water when the solar energy heat supply fails to meet the demand. The designed solar contribution is 71% of the heating load. The demonstration period for this project ends June 30, 1984.

  18. AL. I

    Office of Legacy Management (LM)

    AL. I Department of Energy Washington, DC 20545 OCT 13 Vii87 Mr. John T. Shields A214 National Fertilizer Development Center Tennessee Valley Authority Muscle Shoals, Alabama 35660 Dear Mr. Shields: As you may know, the Department of Energy (DOE) is evaluating the radiological condition of sites that were utilized under the Manhattan Engineer District and the Atomic Energy Commission (AEC) during the early years of nuclear development to determine whether they need remedial action and whether

  19. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  20. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  1. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  2. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  3. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  4. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  5. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  6. Polarized X-Rays Reveal Molecular Alignment in Printed Electronics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Polarized X-Rays Reveal Molecular Alignment in Printed Electronics Print The printing of electronic devices using giant roll-to-roll presses or inkjet-style printers has recently been made possible by the development of solution-processable organic materials with optoelectronic properties. Organic light-emitting diodes (OLEDs) are already being produced commercially, and sensors, organic thin-film transistors (OTFTs), and organic photovoltaics (OPVs) are also well on their way to commercial

  7. Minutes from the May 3, 2012 Printing and Mail Teleconference

    Energy Savers [EERE]

    ... eliminate color, eliminate special finishes, eliminate blank pages) Reminder to send emails to me: Update for name, email address, and your roll (mail, printing or both) ...

  8. Silver Ink for Conductor Printing - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    flake suspended in a suitable solvent amenable to printing. These silver metal suspension formulations require high processing temperatures to sinter the particles (180 C)....

  9. Energy Department Unveils 3D-Printed Building; New Initiatives...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day DOE Announces JUMP Initiative Winners, Launches New Crowdsourcing Calls at Bay Area Maker Faire

  10. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Oct 2015 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Tech Specs for Boundary and first...

  11. E-print Network home page -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Energy, science, and technology for the research community Enter Search Terms Search Advanced Search The E-print Network is . . . . . . a vast, integrated network of electronic ...

  12. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WORKING TOGETHER TO BUILD A FASTER AND LEANER FUTURE FOR WIND TURBINE BLADE MANUFACTURING ... For the wind industry, 3D printing could transform turbine blade mold manufacturing, ...

  13. Minutes from the September 15, 2010 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Some equipment requires approval from the Joint Committee on Printing prior to obtaining that piece of equipment. Mr. Woodruff also said site must request approval from ...

  14. 3D Printed Shelby Cobra | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D Printed Shelby Cobra 3D Printed Shelby Cobra Description ORNL's newly printed 3D car will be showcased at the 2015 NAIAS in Detroit. This "laboratory on wheels" uses the Shelby Cobra design, celebrating the 50th anniversary of this model and honoring the first vehicle to be voted a national monument. The Shelby was printed at the Department of Energy's Manufacturing Demonstration Facility at ORNL using the BAAM (Big Area Additive Manufacturing) machine and is intended as a

  15. 3D Printing a Classic | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D Printing a Classic 3D Printing a Classic January 15, 2015 - 4:02pm Addthis The team from the Oak Ridge Manufacturing Demonstration Facility is at the Detroit Auto Show this week to display their latest accomplishment: a 3D-printed, electric-motor driven, Shelby Cobra. In just six weeks, the team went from designing the car in digital models, to 3D printing the frame and other parts with fiber-reinforced composite material, to assembling, finishing, and painting the final product. President

  16. Structural color printing based on plasmonic metasurfaces of...

    Office of Scientific and Technical Information (OSTI)

    Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform ...

  17. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 1

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  18. DOE fundamentals handbook: Engineering symbology, prints, and drawings

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  19. DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 2

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

  20. Toyota Collaborates with the ALS and Molecular Foundry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Toyota Collaborates with the ALS and Molecular Foundry Toyota Collaborates with the ALS and Molecular Foundry Print Friday, 18 July 2014 10:41 Toyota has been conducting research at the ALS since 2010, using soft x-rays and the expertise and endstations at Beamline 6.3.1 to help them gain insight into the chemistry of electrolytes for use in magnesium-ion batteries. The hope is that the research eventually leads to a fully developed magnesium-based battery technology that would replace lithium

  1. New ALS Technique Guides IBM in Next-Generation Semiconductor Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Guides IBM in Next-Generation Semiconductor Development New ALS Technique Guides IBM in Next-Generation Semiconductor Development Print Wednesday, 21 January 2015 09:37 A new measurement technique developed at the ALS is helping guide the semiconductor industry in next-generation nanopatterning techniques. Directed self assembly (DSA) of block copolymers is an extremely promising strategy for high-volume, cost-effective semiconductor manufacturing at the nanoscale. Materials

  2. ALS-U Update: BESAC Announces Results of Facility Upgrade Prioritization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications ALS-U Update: BESAC Announces Results of Facility Upgrade Prioritization Print by Dave Robin, on behalf of the ALS-U Project Development Team On Thursday, June 9, DOE's Basic Energy Sciences Advisory Committee (BESAC) released the recommendations of the BES Facility Upgrade Prioritization Subcommittee. I'm pleased to announce that the subcommittee (whose full report can be found here) considers the proposed ALS-U project "absolutely central" to contribute to world leading

  3. DOE Science Showcase - 3D Printing | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    ... Ames Lab Video of the 3D printer in action, YouTube 3D printing yields advantages for US ITER engineers, ORNL 3D Printing Rises to the Occasion, ORNL "Printing" Tiny batteries, DOE ...

  4. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells...

  5. Local Motors Begins Their Six Day Quest to 3D Print the 'Strati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Local Motors Begins Their Six Day Quest to 3D Print the 'Strati' Car Live at IMTS (470.83 KB) More Documents & Publications Printing a Car: A Team Effort in Innovation Printing a ...

  6. Summary Slides of ALS Science Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary Slides of ALS Science Highlights Print No. Slide Beamline Full Web Highlight ALSNews Volume 337 Dopant Effects in Plasmonic Materials 5.4 08.10.2016 Vol. 375 336 Antidepressants Block Serotonin Transporter 5.0.2 07.13.2016 Vol. 374 335 Catalyst Boosts Olefin Formation from Syngas 9.3.2 08.10.2016 Vol. 375 334 Oxygen's Role in Lithium-Ion Battery Capacity 8.0.1 07.13.2016 Vol. 374 333 3D Charge Order in a High-Tc Superconductor 4.0.2 06.15.2016 Vol. 373 332 New Graphene and Nanocrystal

  7. Summary Slides of ALS Science Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary Slides of ALS Science Highlights Print No. Slide Beamline Full Web Highlight ALSNews Volume 337 Dopant Effects in Plasmonic Materials 5.4 08.10.2016 Vol. 375 336 Antidepressants Block Serotonin Transporter 5.0.2 07.13.2016 Vol. 374 335 Catalyst Boosts Olefin Formation from Syngas 9.3.2 08.10.2016 Vol. 375 334 Oxygen's Role in Lithium-Ion Battery Capacity 8.0.1 07.13.2016 Vol. 374 333 3D Charge Order in a High-Tc Superconductor 4.0.2 06.15.2016 Vol. 373 332 New Graphene and Nanocrystal

  8. Fact #804: November 18, 2013 Tool Available to Print Used Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Available to Print Used Vehicle Fuel Economy Window Stickers Fact 804: November 18, 2013 Tool Available to Print Used Vehicle Fuel Economy Window Stickers Because used vehicle ...

  9. Takeda Advances Diabetes Drug Development at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Takeda Advances Diabetes Drug Development at the ALS Print Type 2 diabetes mellitus (T2DM), characterized by abnormally high blood glucose levels, affects hundreds of millions of people worldwide. In the pursuit to better treat this disease, the human receptor protein GPR40 has been identified by pharmaceutical company Takeda as a potential new drug target. To this end, TAK-875 (fasiglifam), a partial agonist of GPR40, was brought into clinical development by Takeda as a possible new treatment

  10. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant energy density if their graphite anodes were replaced with lithium metal anodes. But there's a major concern with substituting lithium-when the battery cycles, microscopic fibers of the lithium anodes ("dendrites") form on the surface of the lithium electrode and spread across the electrolyte until they reach

  11. Suitability for 3D Printed Parts for Laboratory Use

    SciTech Connect (OSTI)

    Zwicker, Andrew P.; Bloom, Josh; Albertson, Robert; Gershman, Sophia

    2014-08-01

    3D printing has become popular for a variety of users, from industrial to the home hobbyist, to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory and is equally suitable for producing equipment for advanced undergraduate laboratories.

  12. 3D Printing a Classic Shelby Cobra | Department of Energy

    Energy Savers [EERE]

    7pt.2PerformanceBasedServiceAcquisition.pdf 37pt.2PerformanceBasedServiceAcquisition.pdf (1022.17 KB) More Documents & Publications Acquisitions___Communications.pdf Acquisition Guide Chapter 7.1 - Acquisition Planning One Acquisition Solution for Integrated Services (OASIS) - Brad DeMers, General Services Administration (GSA)

    3D Printed Shelby Cobra 3D Printed Shelby Cobra Description ORNL's newly printed 3D car will be showcased at the 2015 NAIAS in Detroit. This "laboratory on

  13. 3D Printing Comes of Age | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    and used only for prototype builds, to performing on the real factory floor. Watch the video about the 3D printing demonstration. Learn more about the Advanced Manufacturing Office

  14. Printing a Car: A Team Effort in Innovation

    Office of Energy Efficiency and Renewable Energy (EERE)

    Oak Ridge National Lab's work with Local Motors to build a 3D-printed car was highlighted at the International Manufacturing Technology Show (IMTS) in September 2014 with a live demonstration.

  15. 3D-Printed Car by Local Motors- The Strati

    Broader source: Energy.gov [DOE]

    A timelapse video of the production process behind The Strati - the 3D-printed car by Local Motors, which manufactured with Oak Ridge National Laboratory (ORNL) and delivered at the International Manufacturing Technology Show (IMTS) in September of 2014.

  16. 3D Printing Enables New Generation of Heat Exchangers

    Broader source: Energy.gov [DOE]

    Three-dimensional printing is revolutionizing how we manufacture objects in almost every industry—from vehicles to medical devices to biotech. Now, the University of Maryland, through a partnership...

  17. Printed decorative solar panels could become part of our homes...

    Open Energy Info (EERE)

    content Printed decorative solar panels could become part of our homes and offices Hello, I provide user supp... The top one on this page: htt... Can you send the specific...

  18. 3D Printed Car at the International Manufacturing Technology...

    Office of Environmental Management (EM)

    Image: Courtesy of Local Motors Carbon Fiber Pellets 4 of 6 Carbon Fiber Pellets Pellets of plastic mixed with carbon fiber were used in the production process of the 3D-printed ...

  19. Instructions to Print Monthly P-card Statement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to Print Monthly P-card Statement 1. Go to Website https:gov1.paymentnet.com and login with your Organization ID, User ID and Pass Phrase. Organization ID is doe0001. User ID and...

  20. Future of 3D Printing | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In 2016, GE will enter a new jet engine into service called the CFM LEAP-the first in GE's line to incorporate 3D-printed parts. Specifically, it will be a combustion component ...

  1. A Unix Print Filter for Controlling an HP Laserjet Printer

    SciTech Connect (OSTI)

    Hoffman, F.M.

    1992-01-01

    This report describes a Unix print filter designed to control an Hewlett Packard Laserjet or other printer that uses Hewlett Packard's Printer Control Language (HP-PCL). The filter gives users the ability to control print pitch, orientation, and indentation by using standard flags to the Unix lpr command or multiple entries in the /etc/printcap file and allows both ascii and binary (i.e., graphics and down-loadable fonts) files to be printed. Additionally, the filter provides some accounting capability. The supported print pitch and orientation options are described, as are the different configuration options. The code for the filter is included in Appendix A and sample entries for the /etc/printcap file are included in Appendix B and C.

  2. Printing 3D Catalytic Devices | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Printing 3D Catalytic Devices An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser. Ames Laboratory scientist Igor...

  3. Browse by Discipline -- E-print Network Subject Pathways: Fission...

    Office of Scientific and Technical Information (OSTI)

    K L M N O P Q R S T U V W X Y Z Optimization Online, An E-Print Site for the Optimization Community Oregon State University, Department of Mathematics, Vector Calculus Gap Project

  4. Browse by Discipline -- E-print Network Subject Pathways: Fossil...

    Office of Scientific and Technical Information (OSTI)

    of Petroleum and Minerals Al-Khattaf, Sulaiman (Sulaiman Al-Khattaf) - Department of Chemical Engineering, King Fahd University of Petroleum and Minerals Al-Majed, Abdulaziz ...

  5. Researchers 3D print ultralight supercapacitors | National Nuclear Security

    National Nuclear Security Administration (NNSA)

    Administration | (NNSA) 3D print ultralight supercapacitors Monday, February 22, 2016 - 12:00am NNSA Blog The micro-architectured, ultra-lightweight supercapacitor material is able to retain energy on par with those made with electrodes 10 to 100 times thinner. For the first time ever, scientists at Lawrence Livermore National Laboratory and UC Santa Cruz have successfully 3D-printed supercapacitors using an ultra-lightweight graphene aerogel, opening the door to novel, unconstrained designs

  6. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Meeting ALS User Meeting web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User...

  7. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron...

  8. ALS Director's Update 2016: Reflections on Our Past, Present, and Future

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Director's Update 2016: Reflections on Our Past, Present, and Future ALS Director's Update 2016: Reflections on Our Past, Present, and Future Print We entered the new year on a very positive note with the passage of a federal budget for fiscal year 2016 that will provide a modest increase in funding for ALS operations. Another exciting outcome of the budget process was that Congress provided additional funding this year for research and development for the ALS upgrade, ALS-U. We are in the early

  9. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  10. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  11. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  12. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  13. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  14. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  15. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination of the first samples. Adding to recent advances in cometary science showing the

  16. ALS, Molecular Foundry, and aBeam Technologies Collaborate to Make

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metrology History ALS, Molecular Foundry, and aBeam Technologies Collaborate to Make Metrology History ALS, Molecular Foundry, and aBeam Technologies Collaborate to Make Metrology History Print Thursday, 21 January 2016 12:47 Through a collaboration with two Berkeley Lab user facilities as well as two other national labs, a small Bay Area company has made big news in the semiconductor world. Modern electronics are getting smaller and smaller, which means the demands on semiconductor

  17. New ALS Technique Guides IBM in Next-Generation Semiconductor Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Guides IBM in Next-Generation Semiconductor Development Print A new measurement technique developed at the ALS is helping guide the semiconductor industry in next-generation nanopatterning techniques. Directed self assembly (DSA) of block copolymers is an extremely promising strategy for high-volume, cost-effective semiconductor manufacturing at the nanoscale. Materials that self-assemble spontaneously form nanostructures down to the molecular scale, which would revolutionize

  18. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting October 3-5, 2011 Lawrence Berkeley National Laboratory, California

  19. OSTIblog Articles in the 3D Printing Topic | OSTI, US Dept of Energy Office

    Office of Scientific and Technical Information (OSTI)

    of Scientific and Technical Information 3D Printing Topic 3-D Printing - A powerful tool gains momentum by Kathy Chambers 29 May, 2014 in 17530 3D%20printed%20perforated%20metal%20box.jpg 3-D Printing - A powerful tool gains momentum Read more about 17530 3D printing technology is gaining fresh momentum in Department of Energy (DOE) research endeavors. 3D printing is achieved using an additive manufacturing process that creates 3D objects directly from a computer model, depositing material

  20. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J.; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-II; Yu; Chang-Jae; Ko, Heung-Cho; Stoykovich; Mark; Yoon, Jongseung

    2011-07-05

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  1. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred; Motala, Michael; Ahn, Jong -Hyun; Park, Sang -Il; Yu, Chang -Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2015-08-25

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  2. Optical systems fabricated by printing-based assembly

    DOE Patents [OSTI]

    Rogers, John; Nuzzo, Ralph; Meitl, Matthew; Menard, Etienne; Baca, Alfred J; Motala, Michael; Ahn, Jong-Hyun; Park, Sang-Il; Yu, Chang-Jae; Ko, Heung Cho; Stoykovich, Mark; Yoon, Jongseung

    2014-05-13

    Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

  3. Toward integrated PV panels and power electronics using printing technologies

    SciTech Connect (OSTI)

    Ababei, Cristinel; Yuvarajan, Subbaraya; Schulz, Douglas L.

    2010-07-15

    In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

  4. Making 3D Printed Christmas Ornaments | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Making 3D Printed Christmas Ornaments Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Making 3D Printed Christmas Ornaments Thomas The Elf 2011.12.20 Hi everybody! I am back again this year, bringing you some more holiday cheer from the GE Global Research labs! As an encore to the redesign of Santa's sleigh and

  5. High density printed electrical circuit board card connection system

    DOE Patents [OSTI]

    Baumbaugh, A.E.

    1997-05-06

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections. 12 figs.

  6. High density printed electrical circuit board card connection system

    DOE Patents [OSTI]

    Baumbaugh, Alan E.

    1997-01-01

    A zero insertion/extraction force printed circuit board card connection system comprises a cam-operated locking mechanism disposed along an edge portion of the printed circuit board. The extrusions along the circuit board mate with an extrusion fixed to the card cage having a plurality of electrical connectors. The card connection system allows the connectors to be held away from the circuit board during insertion/extraction and provides a constant mating force once the circuit board is positioned. The card connection system provides a simple solution to the need for a greater number of electrical signal connections.

  7. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Weve had a number of inquiries about how to best search our E-prints on Web-sites feature for individual authors. Heres what you do. First be sure that the E-prints on Web ...

  8. Install the E-print Network toolbar -- Energy, science, and technology...

    Office of Scientific and Technical Information (OSTI)

    Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints FAQ * HELP * SITE MAP * CONTACT US Enter Search Terms Search Advanced Search

  9. OSTI's E-print Network content tops 900,000 documents | OSTI...

    Office of Scientific and Technical Information (OSTI)

    than 22,000 scientific e-print Web sites. In addition, the E-print Network provides links to more than 2,900 relevant scientific societies. This Web portal, established as the ...

  10. ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 ...

  11. Picture of the Week: An explosion of 3D printing technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    structure. May 24, 2015 An explosion of 3D printing technology x View image on Flickr Additive Manufacturing, known also as 3D printing, allows for the rapid production of...

  12. EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Just Plain Cool, the 3D Printed Shelby Cobra EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra February 4, 2015 - 4:32pm Addthis Indistinguishable from conventional production vehicles on display, the 3D printed Shelby Cobra celebrated its 50th anniversary at the Detroit Auto Show in early January. Printed at the Department of Energy's Manufacturing Demonstration Facility at Oak Ridge National Laboratory, the Shelby Cobra electric vehicle replica is

  13. Printing Tiny Batteries | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Printing" Tiny Batteries? Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 06.26.13 Stories of Discovery & Innovation: "Printing" Tiny Batteries? Print Text Size: A A A Subscribe FeedbackShare Page Researchers use sophisticated 3D printing techniques to create batteries the size of a grain of sand. This work, featured in the Office of

  14. Gas microstrip detectors based on flexible printed circuit technology

    SciTech Connect (OSTI)

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Maier, J.M.C.

    1996-06-01

    The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  15. Printing a Car: A Team Effort in Innovation

    SciTech Connect (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig

    2014-09-17

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  16. Monolithically integrated Helmholtz coils by 3-dimensional printing

    SciTech Connect (OSTI)

    Li, Longguang [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Abedini-Nassab, Roozbeh; Yellen, Benjamin B., E-mail: yellen@duke.edu [Department of Electrical Engineering, University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Department of Mechanical Engineering and Materials Science, Duke University, P.O. Box 90300, Hudson Hall, Durham, North Carolina 27708 (United States)

    2014-06-23

    3D printing technology is of great interest for the monolithic fabrication of integrated systems; however, it is a challenge to introduce metallic components into 3D printed molds to enable broader device functionality. Here, we develop a technique for constructing a multi-axial Helmholtz coil by injecting a eutectic liquid metal Gallium Indium alloy (EGaIn) into helically shaped orthogonal cavities constructed in a 3D printed block. The tri-axial solenoids each carry up to 3.6?A of electrical current and produce magnetic field up to 70?G. Within the central section of the coil, the field variation is less than 1% and is in agreement with theory. The flow rates and critical pressures required to fill the 3D cavities with liquid metal also agree with theoretical predictions and provide scaling trends for filling the 3D printed parts. These monolithically integrated solenoids may find future applications in electronic cell culture platforms, atomic traps, and miniaturized chemical analysis systems based on nuclear magnetic resonance.

  17. Printing a Car: A Team Effort in Innovation

    ScienceCinema (OSTI)

    Rogers, Jay; Love, Lonnie; Johnson, Mark; Ivester, Rob; Neff, Rick; Blue, Craig;

    2014-11-24

    The story behind the realization of a unique project: the building of a 3D printed electric car, as told by team members. Strati materialized out of 15% carbon-reinforced ABS thermoplastic in a record 44 hours, under the very eyes of attendees at this year's International Manufacturing Technology Show (IMTS).

  18. Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Particles from Comet 81P/Wild 2 Viewed by ALS Microscopes Print Wednesday, 30 May 2007 00:00 NASA's $200-million, seven-year-long Stardust mission returned to Earth thousands of tiny particles snagged from the coma of comet 81P/Wild 2. Four ALS beamlines and the researchers using them were among the hundreds of scientists and dozens of experimental techniques in facilities around the world that contributed to the preliminary examination

  19. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Improve EV Power and Efficiency | Department of Energy Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency April 28, 2015 - 2:02pm Addthis 3-D Printed Inverter 3-D Printed Inverter Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and

  20. 3D Printed and Semiconductor Technology 'Mash-up' | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D Printed and Semiconductor Technology 'Mash-up' 3D Printed and Semiconductor Technology 'Mash-up' May 7, 2015 - 4:11pm Addthis 3D Printed and Semiconductor Technology 'Mash-up' What will you get if you put a 3D-printed inverter package with wide bandgap materials, together with the 3D-printed EV version of the Shelby Cobra "plug and play" laboratory-on-wheels? You'll get innovation - innovation that will define even lighter, more powerful, and more efficient vehicles. Oak Ridge

  1. Selective evaporation of focusing fluid in two-fluid hydrodynamic print head.

    SciTech Connect (OSTI)

    Keicher, David M.; Cook, Adam W.

    2014-09-01

    The work performed in this project has demonstrated the feasibility to use hydrodynamic focusing of two fluid steams to create a novel micro printing technology for electronics and other high performance applications. Initial efforts focused solely on selective evaporation of the sheath fluid from print stream provided insight in developing a unique print head geometry allowing excess sheath fluid to be separated from the print flow stream for recycling/reuse. Fluid flow models suggest that more than 81 percent of the sheath fluid can be removed without affecting the print stream. Further development and optimization is required to demonstrate this capability in operation. Print results using two-fluid hydrodynamic focusing yielded a 30 micrometers wide by 0.5 micrometers tall line that suggests that the cross-section of the printed feature from the print head was approximately 2 micrometers in diameter. Printing results also demonstrated that complete removal of the sheath fluid is not necessary for all material systems. The two-fluid printing technology could enable printing of insulated conductors and clad optical interconnects. Further development of this concept should be pursued.

  2. Access to the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Services Office and take safety training (see Complete Safety Training ) before ... the User Office in advance and have all their online forms completed before their arrival. ...

  3. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 ALS User Meeting banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users' Executive...

  4. Direct printing and reduction of graphite oxide for flexible supercapacitors

    SciTech Connect (OSTI)

    Jung, Hanyung; Ve Cheah, Chang; Jeong, Namjo; Lee, Junghoon

    2014-08-04

    We report direct printing and photo-thermal reduction of graphite oxide (GO) to obtain a highly porous pattern of interdigitated electrodes, leading to a supercapacitor on a flexible substrate. Key parameters optimized include the amount of GO delivered, the suitable photo-thermal energy level for effective flash reduction, and the substrate properties for appropriate adhesion after reduction. Tests with supercapacitors based on the printed-reduced GO showed performance comparable with commercial supercapacitors: the energy densities were 1.06 and 0.87 mWh/cm{sup 3} in ionic and organic electrolytes, respectively. The versatility in the architecture and choice of substrate makes this material promising for smart power applications.

  5. Coaxial connector for use with printed circuit board edge connector

    DOE Patents [OSTI]

    Howard, Donald R.; MacGill, Robert A.

    1989-01-01

    A coaxial cable connector for interfacing with an edge connector for a printed circuit board whereby a coaxial cable can be interconnected with a printed circuit board through the edge connector. The coaxial connector includes a body having two leg portions extending from one side for receiving the edge connector therebetween, and a tubular portion extending from an opposing side for receiving a coaxial cable. A cavity within the body receives a lug of the edge connector and the center conductor of the coaxial cable. Adjacent lugs of the edge connector can be bend around the edge connector housing to function as spring-loaded contacts for receiving the coaxial connector. The lugs also function to facilitate shielding of the center conductor where fastened to the edge connector lug.

  6. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (ORNL) Big Area Additive Manufacturing (BAAM) system. BAAM is 500 to 1,000 times faster and capable of printing polymer components over 10 times larger than today's industrial additive machines. With research blades measuring 13 meters (42 feet) in length, BAAM provides the necessary scale and foundation for this ground-breaking advancement in blade research and manufacturing. The U.S. Department of Energy's (DOE's) Office of Energy Efficiency and Renewable Energy (EERE) plays a strategic role

  7. Transforming Wind Turbine Blade Mold Manufacturing with 3D Printing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Big Area Additive Manufacturing, or BAAM machine developed in collaboration with Cincinnati Incorporated. BAAM is 500 to 1,000 times faster and capable of printing polymer components over 10 times larger than today's industrial additive machines. With research blades measuring 13 meters (42 feet) in length, BAAM provides the necessary scale and foundation for this ground-breaking advancement in blade research and manufacturing. The U.S. Department of Energy's (DOE's) Office of Energy Efficiency

  8. SANDIA REPORT SAND2014-19136 Unlimited Release Printed October

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-19136 Unlimited Release Printed October 2014 An Aeroelastic Reference Model for the SWIFT Turbines Brian R. Resor, Bruce LeBlanc Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract

  9. SANDIA REPORT SAND2014-19199 Unlimited Release Printed October,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    99 Unlimited Release Printed October, 2014 A Handbook on Artificial Soils for Indoor Photovoltaic Soiling Tests Patrick D. Burton, Bruce H. King Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract

  10. Federal Sustainable Print Management - DOE Directives, Delegations, and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Requirements G 436.1-1, Federal Sustainable Print Management by Jake Wooley The Guide provides acceptable approaches for implementing the IT sustainability requirements and criteria required by DOE Order 436.1, Departmental Sustainability, dated 5-2-11, and related to the sustainability requirements contained in Executive Order 13693, "Planning for Federal Sustainability in the Next Decade." Does not cancel/supersede other directives. g4361-1.pdf -- PDF Document, 450 KB Writer:

  11. Gas microstrip detectors based on flexible printed circuit

    SciTech Connect (OSTI)

    Salomon, M.; Crowe, K.; Faszer, W.; Lindsay, P.; Curran Maier, J.M.

    1995-09-01

    Microstrip Gas Detectors (MSGC`s) were introduced some years ago as position sensitive detectors capable of operating at very high rates. The authors have studied the properties of a new type of Gas Microstrip Counter built using flexible printed circuit technology. They describe the manufacturing procedures, the assembly of the device, as well as its operation under a variety of conditions, gases and types of radiation. They also describe two new passivation materials, tantalum and niobium, which produce effective surfaces.

  12. Jefferson Lab Visitor's Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  13. Gate Access

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gate Access Gate Access Print When you first arrive at the ALS, gate clearance will have been arranged for you by the User Office. Berkeley Lab employees and visiting researchers (participating guests) may arrange for gate clearance for their visitors through the Lab's Site Access Office . Please notify the Site Office by submitting a Visitor Pass Request before 3:00 p.m. on the day before the expected visit. Include the name(s) of any visitors, the time you expect them, and your name and

  14. How Do I Bring and Use Electrical Equipment at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bring and Use Electrical Equipment at the ALS? Print Testing All electrical equipment must meet minimum electrical safety requirements. Whenever possible, we rely on third party organizations like Underwriters Laboratories (UL) . The simplest, quickest, cheapest, most reliable way to have equipment approved is to make sure that it has a label from a Nationally Recognized Testing Lab (NRTL) . We recognize that many pieces of equipment are specialized, and manufacturers do not obtain the testing.

  15. Cisco Systems Funds "Whisker" Growth Research at the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cisco Systems Funds "Whisker" Growth Research at the ALS Print Lead-free components have been increasingly used in electronics manufacturing since the European Union passed its 2003 Restriction of Hazardous Substances Directive (RoHS), which banned the use of certain hazardous materials in electrical and electronic equipment. To ensure the long-term reliability of mission-critical equipment such as networking hardware, a significant amount of research and development must be undertaken

  16. How Do I Bring and Use Electrical Equipment at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bring and Use Electrical Equipment at the ALS? Print Testing All electrical equipment must meet minimum electrical safety requirements. Whenever possible, we rely on third party organizations like Underwriters Laboratories (UL) . The simplest, quickest, cheapest, most reliable way to have equipment approved is to make sure that it has a label from a Nationally Recognized Testing Lab (NRTL) . We recognize that many pieces of equipment are specialized, and manufacturers do not obtain the testing.

  17. How Do I Bring and Use Electrical Equipment at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bring and Use Electrical Equipment at the ALS? Print Testing All electrical equipment must meet minimum electrical safety requirements. Whenever possible, we rely on third party organizations like Underwriters Laboratories (UL) . The simplest, quickest, cheapest, most reliable way to have equipment approved is to make sure that it has a label from a Nationally Recognized Testing Lab (NRTL) . We recognize that many pieces of equipment are specialized, and manufacturers do not obtain the testing.

  18. How Do I Bring and Use Electrical Equipment at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bring and Use Electrical Equipment at the ALS? Print Testing All electrical equipment must meet minimum electrical safety requirements. Whenever possible, we rely on third party organizations like Underwriters Laboratories (UL) . The simplest, quickest, cheapest, most reliable way to have equipment approved is to make sure that it has a label from a Nationally Recognized Testing Lab (NRTL) . We recognize that many pieces of equipment are specialized, and manufacturers do not obtain the testing.

  19. ALS, Molecular Foundry, and aBeam Technologies Collaborate to Make

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Metrology History ALS, Molecular Foundry, and aBeam Technologies Collaborate to Make Metrology History Print Through a collaboration with two Berkeley Lab user facilities as well as two other national labs, a small Bay Area company has made big news in the semiconductor world. Modern electronics are getting smaller and smaller, which means the demands on semiconductor manufacturers are increasing. To ensure the quality and consistency of substrates, wafer manufacturers employ metrology tools

  20. Access to the ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are required to register with the ALS User Services Office and take safety training (see Complete Safety Training ) before they are issued a Berkeley Lab ID badge and granted...

  1. ALS in the News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the ALS is well represented) New Lithium-Ion Battery Discovery Contradicts ... of water-no deeper than a few molecules-to the surface of a barium fluoride crystal. ...

  2. ALS Staff Photo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On May 14, 2013, members of ALS staff posed for a group photo in front of the dome. A hi-res version can be downloaded here. The last staff photo was taken in 2006. 2013 staff...

  3. ALS Communications Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    organize bi-monthly Science Cafs, create conference and workshop Web sites and publicity, and coordinate ALS participation in Lab-wide events such as the Berkeley Lab Open...

  4. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    facility. Thorough discussion with users of current projects, as well as plans for the future, will place ALS management in a better position to evaluate the needs of users and...

  5. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  6. Researchers find 3-D printed parts to provide low-cost, custom alternatives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for laboratory equipment | Princeton Plasma Physics Lab Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on Facebook 3-D printed parts provide the stands for the aluminum globes in PPPL's Planeterrella, a device that simulates Northern Lights. (Photo by Elle Starkman/PPPL Office of Communications) 3-D printed parts provide the stands for the aluminum globes in PPPL's

  7. Energy Department Unveils 3D-Printed Building; New Initiatives During

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry Day | Department of Energy Unveils 3D-Printed Building; New Initiatives During Industry Day Energy Department Unveils 3D-Printed Building; New Initiatives During Industry Day October 1, 2015 - 12:25pm Addthis The Energy Department announced several new and exciting innovations and programs during Industry Day held at Oak Ridge National Laboratory (ORNL) in Tennessee Sept. 23-24. This included unveiling a 3-D printed building with integrated energy storage via bidirectional wireless

  8. SU-E-T-455: Characterization of 3D Printed Materials for Proton Beam Therapy

    SciTech Connect (OSTI)

    Zou, W; Siderits, R; McKenna, M; Khan, A; Yue, N [Rutgers University, New Brunswick, NJ (United States); McDonough, J; Yin, L; Teo, B [University of Pennsylvania, Philadelphia, PA (United States); Fisher, T [Memorial Medical Center, Modesto, CA (United States)

    2014-06-01

    Purpose: The widespread availability of low cost 3D printing technologies provides an alternative fabrication method for customized proton range modifying accessories such as compensators and boluses. However the material properties of the printed object are dependent on the printing technology used. In order to facilitate the application of 3D printing in proton therapy, this study investigated the stopping power of several printed materials using both proton pencil beam measurements and Monte Carlo simulations. Methods: Five 34 cm cubes fabricated using three 3D printing technologies (selective laser sintering, fused-deposition modeling and stereolithography) from five printers were investigated. The cubes were scanned on a CT scanner and the depth dose curves for a mono-energetic pencil beam passing through the material were measured using a large parallel plate ion chamber in a water tank. Each cube was measured from two directions (perpendicular and parallel to printing plane) to evaluate the effects of the anisotropic material layout. The results were compared with GEANT4 Monte Carlo simulation using the manufacturer specified material density and chemical composition data. Results: Compared with water, the differences from the range pull back by the printed blocks varied and corresponded well with the material CT Hounsfield unit. The measurement results were in agreement with Monte Carlo simulation. However, depending on the technology, inhomogeneity existed in the printed cubes evidenced from CT images. The effect of such inhomogeneity on the proton beam is to be investigated. Conclusion: Printed blocks by three different 3D printing technologies were characterized for proton beam with measurements and Monte Carlo simulation. The effects of the printing technologies in proton range and stopping power were studied. The derived results can be applied when specific devices are used in proton radiotherapy.

  9. 3D-Printed Foam Outperforms Standard Materials | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3D-Printed Foam Outperforms Standard Materials 3D-Printed Foam Outperforms Standard Materials April 27, 2016 - 5:58pm Addthis News release from Lawrence Livermore Laboratory, April 27, 2016. Lawrence Livermore National Laboratory (LLNL) material scientists have found that 3D-printed foam works better than standard cellular materials in terms of durability and long-term mechanical performance. Foams, also known as cellular solids, are an important class of materials with applications ranging from

  10. Next Generation Lunch: Revealing the World’s First 3D Printed Car (text version)

    Broader source: Energy.gov [DOE]

    Below is the text version for the Next Generation Lunch: Revealing the World’s First 3D Printed Car Video.

  11. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The 3D-Printed Shelby Cobra: Defining Rapid Innovation The 3D-Printed Shelby Cobra: Defining Rapid Innovation April 24, 2015 - 9:00am Addthis The 3D-Printed Shelby Cobra: Defining Rapid Innovation img-1294_crop.jpg It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal building lobby after visiting for two weeks. Secretary Moniz dropped in for a

  12. ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    efforts of the the lab's Additive Manufacturing Integrated Energy (AMIE) demonstration. ... by natural gas, were both printed using additive manufacturing via a large-scale 3D ...

  13. OSTIblog Articles in the e-prints Topic | OSTI, US Dept of Energy Office of

    Office of Scientific and Technical Information (OSTI)

    Scientific and Technical Information e-prints Topic Get scientific e-prints by Dennis Traylor 31 Aug, 2012 in Products and Content 4267 EPN_slide2.jpg Get scientific e-prints Read more about 4267 The E-print Network provides a vast, integrated network of electronic scientific and technical information created by scientists and research engineers active in their respective fields, all full-text searchable. Documents such as these are the means by which today's scientists and researchers

  14. Secretary Moniz Tours the 3D-Printed Shelby Cobra | Department...

    Energy Savers [EERE]

    in Knoxville, Tennessee, developed a finishing process that bonds the clear coat and paint layers to the printed car parts' resulting in the highest quality finish possible in...

  15. EERE Success Story-3D Printing Enables New Generation of Heat Exchangers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 3D Printing Enables New Generation of Heat Exchangers EERE Success Story-3D Printing Enables New Generation of Heat Exchangers March 17, 2016 - 10:32am Addthis The University of Maryland used direct metal printing—a 3D printing technology—to manufacture a unique miniaturized air-to-refrigerant heat exchanger as a single, continuous piece. Image: University of Maryland, Center for Environmental Energy Engineering. The University of Maryland used direct metal

  16. In Situ X-Ray Scattering Helps Optimize Printed Solar Cells

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ X-Ray Scattering Helps Optimize Printed Solar Cells In Situ X-Ray Scattering Helps Optimize Printed Solar Cells Print Wednesday, 25 February 2015 00:00 Plastic solar cells that can be printed on flexible sheets with an ink-like solution show a lot of potential as a source of lightweight, inexpensive renewable energy. However, much of the power-conversion efficiency of such cells gets lost in the translation from small-scale lab studies to large-scale manufacturing processes. To help gain

  17. V-148: Novell iPrint Client Unspecified Buffer Overflow Vulnerability

    Broader source: Energy.gov [DOE]

    A vulnerability has been reported in Novell iPrint Client, which can be exploited by malicious people to compromise a user's system

  18. Eddy current gauge for monitoring displacement using printed circuit coil

    DOE Patents [OSTI]

    Visioli, Jr., Armando J.

    1977-01-01

    A proximity detection system for non-contact displacement and proximity measurement of static or dynamic metallic or conductive surfaces is provided wherein the measurement is obtained by monitoring the change in impedance of a flat, generally spiral-wound, printed circuit coil which is excited by a constant current, constant frequency source. The change in impedance, which is detected as a corresponding change in voltage across the coil, is related to the eddy current losses in the distant conductive material target. The arrangement provides for considerable linear displacement range with increased accuracies, stability, and sensitivity over the entire range.

  19. System and method for 3D printing of aerogels

    DOE Patents [OSTI]

    Worsley, Marcus A.; Duoss, Eric; Kuntz, Joshua; Spadaccini, Christopher; Zhu, Cheng

    2016-03-08

    A method of forming an aerogel. The method may involve providing a graphene oxide powder and mixing the graphene oxide powder with a solution to form an ink. A 3D printing technique may be used to write the ink into a catalytic solution that is contained in a fluid containment member to form a wet part. The wet part may then be cured in a sealed container for a predetermined period of time at a predetermined temperature. The cured wet part may then be dried to form a finished aerogel part.

  20. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Wednesday, 26 March 2008 00:00 Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the

  1. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use depends on whether users will be bringing their own system to the ALS, whether they intend to use an existing setup, and which class of laser they intend to use. If You Are Bringing a Laser For lasers of Class 3a/3R or less, there are no specific restrictions for use, but the This e-mail address is being protected from spambots. You need JavaScript enabled to view it needs to be notified and to see the equipment

  2. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use depends on whether users will be bringing their own system to the ALS, whether they intend to use an existing setup, and which class of laser they intend to use. If You Are Bringing a Laser For lasers of Class 3a/3R or less, there are no specific restrictions for use, but the This e-mail address is being protected from spambots. You need JavaScript enabled to view it needs to be notified and to see the equipment

  3. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use depends on whether users will be bringing their own system to the ALS, whether they intend to use an existing setup, and which class of laser they intend to use. If You Are Bringing a Laser For lasers of Class 3a/3R or less, there are no specific restrictions for use, but the This e-mail address is being protected from spambots. You need JavaScript enabled to view it needs to be notified and to see the equipment

  4. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use depends on whether users will be bringing their own system to the ALS, whether they intend to use an existing setup, and which class of laser they intend to use. If You Are Bringing a Laser For lasers of Class 3a/3R or less, there are no specific restrictions for use, but the This e-mail address is being protected from spambots. You need JavaScript enabled to view it needs to be notified and to see the equipment

  5. How Do I Get Authorization to Work with Lasers at the ALS?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Get Authorization to Work with Lasers at the ALS? Print Authorization for laser use depends on whether users will be bringing their own system to the ALS, whether they intend to use an existing setup, and which class of laser they intend to use. If You Are Bringing a Laser For lasers of Class 3a/3R or less, there are no specific restrictions for use, but the This e-mail address is being protected from spambots. You need JavaScript enabled to view it needs to be notified and to see the equipment

  6. ALS "Workhorse" Endstation Retires after 22 Years of Service

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Workhorse" Endstation Retires after 22 Years of Service ALS "Workhorse" Endstation Retires after 22 Years of Service Print Following a career spanning over two decades, ALS endstation 8.0.1.1 retired last October. The endstation, which specializes in soft x-ray fluorescence, is one of many hosted by Beamline 8.0.1 and has been known as a "workhorse" for the more than 450 peer-reviewed publications to its credit. Endstation 8.0.1.1 during its heyday, pictured (from

  7. AL2007-08.doc

    Broader source: Energy.gov (indexed) [DOE]

    Assessment Tool, IEEE Standard 1680-2006 for Environmental Assessment of Personal Computer Products. When is this Acquisition Letter (AL) Effective? This AL is effective...

  8. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ALS User Meeting Awards Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User Meeting. David...

  9. AL PRO | Open Energy Information

    Open Energy Info (EERE)

    search Name: AL-PRO Place: Grossheide, Lower Saxony, Germany Zip: 26532 Sector: Wind energy Product: AL-PRO is an inndependent expert office for wind forecasts, wind...

  10. Science DMZ for ALS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU Science DMZ @ Penn & VTTI Science DMZ @ NOAA Science DMZ @ NERSC Science DMZ @ ALS Multi-facility Workflow Case Study Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web

  11. 3D Printed Tool for Building Aircraft Achieves Guinness World Records Title

    Broader source: Energy.gov [DOE]

    OAK RIDGE, Tenn., Aug. 29, 2016 – A 3D printed trim-and-drill tool, developed by researchers at the Department of Energy’s Oak Ridge National Laboratory to be evaluated at The Boeing Company, has received the title of largest solid 3D printed item by Guinness World Records.

  12. Development and Optimization of Viable Human Platforms through 3D Printing

    SciTech Connect (OSTI)

    Parker, Paul R.; Moya, Monica L.; Wheeler, Elizabeth K.

    2015-08-21

    3D printing technology offers a unique method for creating cell cultures in a manner far more conducive to accurate representation of human tissues and systems. Here we print cellular structures capable of forming vascular networks and exhibiting qualities of natural tissues and human systems. This allows for cheaper and readily available sources for further study of biological and pharmaceutical agents.

  13. Multi-Layer Inkjet Printed Contacts for Silicon Solar Cells: Preprint

    SciTech Connect (OSTI)

    Curtis, C. J.; van hest, M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

    2006-05-01

    Ag, Cu, and Ni metallizations were inkjet printed with near vacuum deposition quality. The approach developed can be easily extended to other conductors such as Pt, Pd, Au, etc. Thick highly conducting lines of Ag and Cu demonstrating good adhesion to glass, Si, and printed circuit board (PCB) have been printed at 100-200 C in air and N2 respectively. Ag grids were inkjet-printed on Si solar cells and fired through the silicon nitride AR layer at 850 C, resulting in 8% cells. Next generation inks, including an ink that etches silicon nitride, have now been developed. Multi-layer inkjet printing of the etching ink followed by Ag ink produced contacts under milder conditions and gave solar cells with efficiencies as high as 12%.

  14. An RFC 1179 Compatible Remote Print Server for Windows 3.1

    Energy Science and Technology Software Center (OSTI)

    1993-11-09

    Internet RFC 1179 describes the protocol to be used for printing files on a remote printer in a TCP/IP network. The protocol is client/server, meaning that the client initiates the print request, and the server receives the request and performs the actual printing locally. This protocol has been in long use on Unix systems derived from the Berkeley Software Distribution, such as DEC''s Ultrix and Sun''s SunOS. LPD Services implements the server portion of thismore » protocol. It handles both the network communication and conformance with the protocol, and printing using the Microsoft Windows device independent printing interface.« less

  15. Local Motors Begins Their Six Day Quest to 3D Print the ‘Strati’ Car Live at IMTS

    Broader source: Energy.gov [DOE]

    An article detailing Local Motors' preparation to 3D print a car at the September 2014 International Manufacturing Technology Show.

  16. 3D%20printed%20perforated%20metal%20box.jpg | OSTI, US Dept of Energy

    Office of Scientific and Technical Information (OSTI)

    Office of Scientific and Technical Information 3D%20printed%20perforated%20metal%20box

  17. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting Archives Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact for their beam

  18. Minutes from the November 17, 2010 Printing and Mail Teleconference

    Energy Savers [EERE]

    ... Majors have sent passwords to appropriate mail managers so they can access the on-line database for data entry. If you have not received your password, please contact Al Majors at ...

  19. Minutes from the January 10, 2013 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    January 10, 2013 Mail discussion Al Majors opened the meeting by discussing the Mail Management Report and latest update on status. One final report is yet to be submitted, after which close out will be accomplished. Copies will be provided to the Mail Managers once completed. Al introduced Derrick Miliner, Program Manager from the General Services Administration, Office of Government-wide Policy, and acknowledged Mr. Miliner's role in completing the Mail Management Report. Mail Security Plans A

  20. Minutes from the June 28, 2012 Printing and Mail Teleconference

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 28, 2012 Mail discussion Al Majors opened the meeting by introducing United Parcel Service (UPS) Representative Shelly Scott. Ms. Scott's contact information is: Shelly Scott shellyscott@ups.com 404 402-9827 (cell) Ms. Scott discussed issues relating to various UPS services available to the department. Next Al introduced Michael R. Sanders, President and Chief Executive Officer of Intra-Mail Network, an innovative, information Technology Company that improves the delivery of mail or email

  1. Impact of pulse thermal processing on the properties of inkjet printed metal and flexible sensors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Joshi, Pooran C.; Kuruganti, Teja; Killough, Stephen M.

    2015-03-11

    In this paper, we report on the low temperature processing of environmental sensors employing pulse thermal processing (PTP) technique to define a path toward flexible sensor technology on plastic, paper, and fabric substrates. Inkjet printing and pulse thermal processing technique were used to realize mask-less, additive integration of low-cost sensors on polymeric substrates with specific focus on temperature, humidity, and strain sensors. The printed metal line performance was evaluated in terms of the electrical conductivity characteristics as a function of post-deposition thermal processing conditions. The PTP processed Ag metal lines exhibited high conductivity with metal sheet resistance values below 100more » mΩ/{whitesquare} using a pulse width as short as 250 μs. The flexible temperature and relative humidity sensors were defined on flexible polyimide substrates by direct printing of Ag metal structures. The printed resistive temperature sensor and capacitive humidity sensor were characterized for their sensitivity with focus on future smart-building applications. Strain gauges were printed on polyimide substrate to determine the mechanical properties of the silver nanoparticle films. Finally, the observed electrical properties of the printed metal lines and the sensitivity of the flexible sensors show promise for the realization of a high performance print-on-demand technology exploiting low thermal-budget PTP technique.« less

  2. Apparatus And Method Of Using Flexible Printed Circuit Board In Optical Transceiver Device

    DOE Patents [OSTI]

    Anderson, Gene R.; Armendariz, Marcelino G.; Bryan, Robert P.; Carson, Richard F.; Duckett, III, Edwin B.; McCormick, Frederick B.; Peterson, David W.; Peterson, Gary D.; Reysen, Bill H.

    2005-03-15

    This invention relates to a flexible printed circuit board that is used in connection with an optical transmitter, receiver or transceiver module. In one embodiment, the flexible printed circuit board has flexible metal layers in between flexible insulating layers, and the circuit board comprises: (1) a main body region orientated in a first direction having at least one electrical or optoelectronic device; (2) a plurality of electrical contact pads integrated into the main body region, where the electrical contact pads function to connect the flexible printed circuit board to an external environment; (3) a buckle region extending from one end of the main body region; and (4) a head region extending from one end of the buckle region, and where the head region is orientated so that it is at an angle relative to the direction of the main body region. The electrical contact pads may be ball grid arrays, solder balls or land-grid arrays, and they function to connect the circuit board to an external environment. A driver or amplifier chip may be adapted to the head region of the flexible printed circuit board. In another embodiment, a heat spreader passes along a surface of the head region of the flexible printed circuit board, and a window is formed in the head region of the flexible printed circuit board. Optoelectronic devices are adapted to the head spreader in such a manner that they are accessible through the window in the flexible printed circuit board.

  3. The Future of Manufacturing Takes Shape: 3D Printed Car on Display at

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manufacturing Summit | Department of Energy The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit The Future of Manufacturing Takes Shape: 3D Printed Car on Display at Manufacturing Summit September 17, 2014 - 9:50am Addthis WORLD&#039;S FIRST 1 of 6 WORLD'S FIRST The world's first 3D-printed car on display at the International Manufacturing Technology Show in Chicago last week. Arizona-based Local Motors, and Cincinnati Incorporated teamed with Oak

  4. Direct laser immobilization of photosynthetic material on screen printed electrodes for amperometric biosensor

    SciTech Connect (OSTI)

    Boutopoulos, Christos; Zergioti, Ioanna; Touloupakis, Eleftherios; Pezzotti, Ittalo; Giardi, Maria Teresa

    2011-02-28

    This letter demonstrates the direct laser printing of photosynthetic material onto low cost nonfunctionalized screen printed electrodes for the fabrication of photosynthesis-based amperometric biosensors. The high kinetic energy of the transferred material induces direct immobilization of the thylakoids onto the electrodes without the use of linkers. This type of immobilization is able to establish efficient electrochemical contact between proteins and electrode, stabilizing the photosynthetic biomolecule and transporting electrons to the solid state device with high efficiency. The functionality of the laser printed biosensors was evaluated by the detection of a common herbicide such as Linuron.

  5. Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Princeton Plasma Physics Lab Bob Ellis designs a PPPL first: A 3D printed mirror for microwave launchers By John Greenwald October 28, 2014 Tweet Widget Google Plus One Share on Facebook Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. (Photo by Elle Starkman/PPPL Office of Communications) Bob Ellis with a 3D-printed plastic prototype for a non-mirror part of the launcher. Gallery: Completed stainless steel and copper mirror system. (Photo by Elle

  6. EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Unique Ability to Power One Another | Department of Energy ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another EERE Success Story-ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another November 17, 2015 - 10:42am Addthis EERE Success Story—ORNL Unveils 3D-Printed Home and Vehicle with the Unique Ability to Power One Another In September, the Department of Energy's Oak Ridge National Laboratory (ORNL) announced successful

  7. Global Wind Day 2016 - AMO's Role in Applying 3D Printing to Wind Blade

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mold Manufacturing | Department of Energy Global Wind Day 2016 - AMO's Role in Applying 3D Printing to Wind Blade Mold Manufacturing Global Wind Day 2016 - AMO's Role in Applying 3D Printing to Wind Blade Mold Manufacturing June 14, 2016 - 4:52pm Addthis Global Wind Day 2016 – AMO’s Role in Applying 3D Printing to Wind Blade Mold Manufacturing Global Wind Day is a worldwide event that occurs annually on June 15 and is dedicated to discovering the possibilities wind holds to reshape

  8. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The 3D-Printed Shelby Cobra: Defining Rapid Innovation The 3D-Printed Shelby Cobra: Defining Rapid Innovation "He said he’d get in if he could drive." "He said he'd get in if he could drive." It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left the Forrestal building lobby after visiting for two weeks. Secretary Moniz dropped in for a

  9. Technical Note: Characterization of custom 3D printed multimodality imaging phantoms

    SciTech Connect (OSTI)

    Bieniosek, Matthew F.; Lee, Brian J.; Levin, Craig S.

    2015-10-15

    Purpose: Imaging phantoms are important tools for researchers and technicians, but they can be costly and difficult to customize. Three dimensional (3D) printing is a widely available rapid prototyping technique that enables the fabrication of objects with 3D computer generated geometries. It is ideal for quickly producing customized, low cost, multimodal, reusable imaging phantoms. This work validates the use of 3D printed phantoms by comparing CT and PET scans of a 3D printed phantom and a commercial “Micro Deluxe” phantom. This report also presents results from a customized 3D printed PET/MRI phantom, and a customized high resolution imaging phantom with sub-mm features. Methods: CT and PET scans of a 3D printed phantom and a commercial Micro Deluxe (Data Spectrum Corporation, USA) phantom with 1.2, 1.6, 2.4, 3.2, 4.0, and 4.8 mm diameter hot rods were acquired. The measured PET and CT rod sizes, activities, and attenuation coefficients were compared. A PET/MRI scan of a custom 3D printed phantom with hot and cold rods was performed, with photon attenuation and normalization measurements performed with a separate 3D printed normalization phantom. X-ray transmission scans of a customized two level high resolution 3D printed phantom with sub-mm features were also performed. Results: Results show very good agreement between commercial and 3D printed micro deluxe phantoms with less than 3% difference in CT measured rod diameter, less than 5% difference in PET measured rod diameter, and a maximum of 6.2% difference in average rod activity from a 10 min, 333 kBq/ml (9 μCi/ml) Siemens Inveon (Siemens Healthcare, Germany) PET scan. In all cases, these differences were within the measurement uncertainties of our setups. PET/MRI scans successfully identified 3D printed hot and cold rods on PET and MRI modalities. X-ray projection images of a 3D printed high resolution phantom identified features as small as 350 μm wide. Conclusions: This work shows that 3D printed

  10. Leaching behavior of copper from waste printed circuit boards with Brnsted acidic ionic liquid

    SciTech Connect (OSTI)

    Huang, Jinxiu; Chen, Mengjun Chen, Haiyan; Chen, Shu; Sun, Quan

    2014-02-15

    Highlights: A Brnsted acidic ILs was used to leach Cu from WPCBs for the first time. The particle size of WPCBs has significant influence on Cu leaching rate. Cu leaching rate was higher than 99% under the optimum leaching conditions. The leaching process can be modeled with shrinking core model, and the E{sub a} was 25.36 kJ/mol. - Abstract: In this work, a Brnsted acidic ionic liquid, 1-butyl-3-methyl-imidazolium hydrogen sulfate ([bmim]HSO{sub 4}), was used to leach copper from waste printed circuit boards (WPCBs, mounted with electronic components) for the first time, and the leaching behavior of copper was discussed in detail. The results showed that after the pre-treatment, the metal distributions were different with the particle size: Cu, Zn and Al increased with the increasing particle size; while Ni, Sn and Pb were in the contrary. And the particle size has significant influence on copper leaching rate. Copper leaching rate was higher than 99%, almost 100%, when 1 g WPCBs powder was leached under the optimum conditions: particle size of 0.10.25 mm, 25 mL 80% (v/v) ionic liquid, 10 mL 30% hydrogen peroxide, solid/liquid ratio of 1/25, 70 C and 2 h. Copper leaching by [bmim]HSO{sub 4} can be modeled with the shrinking core model, controlled by diffusion through a solid product layer, and the kinetic apparent activation energy has been calculated to be 25.36 kJ/mol.

  11. E-print Network Web Log News: Research Communications for Scientists...

    Office of Scientific and Technical Information (OSTI)

    Description This Web Log provides the latest information about changes to E-print Network ... questions, concerns and other input by using the Contact Us page. Web Log Archive

  12. Frequently Asked Questions (FAQ) for the E-print Network -- Energy...

    Office of Scientific and Technical Information (OSTI)

    ... The E-print Network pulls these vast and widely dispersed data together through a Deep Web ... available on the Web through a browse capability across more than ten thousand sites. ...

  13. Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency

    Broader source: Energy.gov [DOE]

    Plug-in electric vehicle technologies are on their way to being even lighter, more powerful and more efficient with the advent of power inverters created by 3-D printing and novel semiconductors.

  14. The Future of Manufacturing Takes Shape: 3D Printed Car on Display...

    Office of Environmental Management (EM)

    Image: Courtesy of Local Motors Carbon Fiber Pellets 4 of 6 Carbon Fiber Pellets Pellets of plastic mixed with carbon fiber were used in the production process of the 3D-printed ...

  15. The 3D-Printed Shelby Cobra: Defining Rapid Innovation | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    It's been hard to miss in the media and on its almost non-stop road tour, but AMO wanted you to know that our 3D-printed EV version of the 50th anniversary Shelby Cobra just left ...

  16. Researchers find 3-D printed parts to provide low-cost, custom...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Researchers find 3-D printed parts to provide low-cost, custom alternatives for laboratory equipment By Raphael Rosen February 26, 2015 Tweet Widget Google Plus One Share on ...

  17. EERE Success Story-Novel 3-D Printed Inverters for Electric Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Novel 3-D Printed Inverters for Electric Vehicles Can Improve EV Power and Efficiency EERE ... The first-of-its-kind liquid-cooled, all-silicon carbide traction drive inverter ...

  18. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    promote energy security, protect the interests of taxpayers, and safeguard the health of the environment. Notice of Intent to Develop DOE G 436.1-1, Sustainable Print Management...

  19. EERE Success Story-Just Plain Cool, the 3D Printed Shelby Cobra...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This innovative 3D printing process took just six weeks, and the final result was a glistening roadster fitted with a 100-kilowatt electric motor that can still go zero to 60 mph ...

  20. Screening tests of conformally-coated printed wiring boards

    SciTech Connect (OSTI)

    Skibo, M.D.; Even, W.R.

    1982-03-01

    Identical printed wiring boards (PWB) were fabricated using glass-triazene as substrates and were conformally coated with either conothane or parylene. The boards were then placed in sealed canisters along with TATB and other organic materials found in recent weapon systems. While subjected to electrical potentials of 120V and 250V, these PWBs were either aged at 60/sup 0/, 70/sup 0/, or 80/sup 0/ or temperature cycled for as long as 16 months. The resistivities of the boards were precisely measured before and after aging to determine the effect of time, temperature, and environment on the electrical characteristics of board materials. In all cases board resistivity increased with temperature and duration of test. This increase was believed to be related to either a reduction in water content in the board substrate or a completion of cure of the conformal coating with time elevated temperature. Both mechanisms would result in a reduction in conductive species. In spite of high humidity levels, no evidence of current - activated filament formation between adjacent active circuit paths on aged PWBs was seen. Similarly, soldered contacts were free of thermally-induced fatigue damage after as many as 500 cycles between -54 and 70/sup 0/C at 1 cycle/day.

  1. What Makes AMIE, the 3D printed home and vehicle, unique? | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy What Makes AMIE, the 3D printed home and vehicle, unique? What Makes AMIE, the 3D printed home and vehicle, unique? February 22, 2016 - 3:39pm Addthis Meet AMIE - the Additive Manufacturing Integrated Energy demonstration project. Led by the Energy Department's Oak Ridge National Laboratory and many industry partners, the AMIE project changes the way we think about generating, storing, and using electrical power. AMIE uses an integrated energy system that shares energy. Karma Sawyer,

  2. Analytical Study on Thermal and Mechanical Design of Printed Circuit Heat Exchanger

    SciTech Connect (OSTI)

    Su-Jong Yoon; Piyush Sabharwall; Eung-Soo Kim

    2013-09-01

    The analytical methodologies for the thermal design, mechanical design and cost estimation of printed circuit heat exchanger are presented in this study. In this study, three flow arrangements of parallel flow, countercurrent flow and crossflow are taken into account. For each flow arrangement, the analytical solution of temperature profile of heat exchanger is introduced. The size and cost of printed circuit heat exchangers for advanced small modular reactors, which employ various coolants such as sodium, molten salts, helium, and water, are also presented.

  3. Print-based Manufacturing of Integrated, Low Cost, High Performance SSL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Luminaires | Department of Energy Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Print-based Manufacturing of Integrated, Low Cost, High Performance SSL Luminaires Lead Performer: Eaton Corporation - Menomonee Falls, WI Partners: - Heraeus Materials Technology, LLC - Conshohocken, PA - Haiku Tech, Inc - Miami, FL - Eaton Cooper Lighting Innovation Center - Peachtree City, GA DOE Total Funding: $2,468,672 Cost Share: $2,468,676 Project Term: 9/15/2013 -

  4. Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    breakage over time | Argonne National Laboratory Intense X-rays expose tiny flaws in 3-D printed titanium that can lead to breakage over time By Katie Elyce Jones * March 4, 2016 Tweet EmailPrint Titanium is strong but light - a desirable property among metals. In the twentieth century, titanium was used in military aircraft and equipment and commercial jets. Today, we find this tough and flexible metal all around us - in sports gear, tools, surgical and dental implants, prosthetics,

  5. Summary Slides of ALS Science Highlights

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Highlights Print No. Slide Beamline Full Web ... Vol. 356 294 Graphene's 3D Counterpart 10.0.1 ... 06.27.2007 Vol. 277 142 Laser-Seeded CSR 1.4.3 04.25.2007 ...

  6. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the ultrafast temporal information. The other approach is to develop a detector that is fast enough to resolve

  7. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the ultrafast temporal information. The other approach is to develop a detector that is fast enough to resolve

  8. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the ultrafast temporal information. The other approach is to develop a detector that is fast enough to resolve

  9. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the ultrafast temporal information. The other approach is to develop a detector that is fast enough to resolve

  10. The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Focus The ALS X-Ray Streak Camera: Bringing the Ultrafast and Ultrasmall into Focus Print Studying the world of the ultrasmall and the ultrafast is at the frontier of scientific research. Two x-ray approaches can be used for ultrafast examinations. The first entails developing sources that have short x-ray pulses such as free-electron lasers and slicing sources, which will provide the ultrafast temporal information. The other approach is to develop a detector that is fast enough to resolve

  11. Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

    SciTech Connect (OSTI)

    Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.; Basti, Mufeed M.

    2016-01-01

    The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutions was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.

  12. Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Elliott, Amelia; AlSalihi, Sarah; Merriman, Abbey L.; Basti, Mufeed M.

    2016-01-01

    The densification of parts that are produced by binder jetting Additive Manufacturing (AM; a.k.a. “3D Printing”) is an essential step in making them mechanically useful. By increasing the packing factor of the powder bed by incorporating nanoparticles into the binder has potential to alleviate the amount of shrinkage needed for full densification of binder jet parts. We present preliminary data on the use of 316L Stainless Steel Nanoparticles (SSN) to densify 316L stainless steel binder jet parts. Aqueous solutions of Diethylene Glycol (DEG) or Ethylene Glycol (EG) were prepared at different DEG/water and EG/water molar ratios; pH of the solutionsmore » was adjusted by the use of 0.10 M sodium hydroxide. Nanoparticles were suspended in a resulted solution at a volume percentage of SSN/solution at 0.5%. The suspension was then sonicated for thirty minutes. One milliliter of the suspension was added stepwise to a sintered, printed disk with the dimensions: (d = 10 mm, h = 3 mm) in the presence of a small magnet. The 3D part was then sintered again. Moreover, the increase in the mass of the 3D part was used as indication of the amount of nanoparticles that diffused in the 3D part. This mass percent increase was studied as a function of pH of the suspension and as function DEG/water molar ratio. Unlike EG, data show that change in pH affects the mass percent when the suspension was made with DEG. Finally, optical analysis of the discs’ cross sections revealed trends metallic densities similar to trends in the data for mass increase with changing pH and water molar ratio.« less

  13. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ALS User Meeting Awards Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User Meeting. David A. Shirley Award for Outstanding Scientific Achievement at the ALS shirley award The David A. Shirley Award for Scientific Achievement went to, from left, Carl Percival (University of Manchester), Dudley Shallcross [(University of Bristol) not pictured], and Craig Taatjes and David Osborn (Sandia), for making the first

  14. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the National Center of Electron Microscopy, and the National Energy Research Scientific Computing Center. ALS Collaborative Postdoctoral Fellowships normally provide only partial...

  15. AL2007-05.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AL 2007-05 Acquisition Regulation Date 03292007 ACQUISITION LETTER This Acquisition ... LETTERS REMAINING IN EFFECT NUMBER DATE SUBJECT 93-4 040793 Displaced Workers ...

  16. ALS Collaborative Postdoctoral Fellowship Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists) to discuss possible projects and to identify external sources of matching funds. Applicants must then submit a completed ALS Collaborative Postdoctoral...

  17. ALS Scientific Advisory Committee Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    It acts as a "board of directors" to advise the Laboratory on current and future ALS operations, allocation of facility resources, strategic planning, budget development, and...

  18. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfectmore » light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.« less

  19. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    SciTech Connect (OSTI)

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfect light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.

  20. Flow-enhanced solution printing of all-polymer solar cells

    SciTech Connect (OSTI)

    Diao, Ying; Zhou, Yan; Kurosawa, Tadanori; Shaw, Leo; Wang, Cheng; Park, Steve; Guo, Yikun; Reinspach, Julia A.; Gu, Kevin; Gu, Xiaodan; Tee, Benjamin C. K.; Pang, Changhyun; Yan, Hongping; Zhao, Dahui; Toney, Michael F.; Mannsfeld, Stefan C. B.; Bao, Zhenan

    2015-08-12

    Morphology control of solution coated solar cell materials presents a key challenge limiting their device performance and commercial viability. Here we present a new concept for controlling phase separation during solution printing using an all-polymer bulk heterojunction solar cell as a model system. The key aspect of our method lies in the design of fluid flow using a microstructured printing blade, on the basis of the hypothesis of flow-induced polymer crystallization. Our flow design resulted in a similar to 90% increase in the donor thin film crystallinity and reduced microphase separated donor and acceptor domain sizes. The improved morphology enhanced all metrics of solar cell device performance across various printing conditions, specifically leading to higher short-circuit current, fill factor, open circuit voltage and significantly reduced device-to-device variation. However, we expect our design concept to have broad applications beyond all-polymer solar cells because of its simplicity and versatility.

  1. Sintering Kinetics of Inkjet Printed Conductive Silver Lines on Insulating Plastic Substrate

    SciTech Connect (OSTI)

    Zhou, Wenchao; List, III, Frederick Alyious; Duty, Chad E; Babu, Sudarsanam Suresh

    2015-01-24

    This paper focuses on sintering kinetics of inkjet printed lines containing silver nanoparticles deposited on a plastic substrate. Upon heat treatment, the change of resistance in the printed lines was measured as a function of time and sintering temperatures from 150 to 200 C. A critical temperature was observed for the sintering process, beyond which there was no further reduction in resistance. Analysis shows the critical temperature correlates to the boiling point of the solvent, which is attributed to a liquid-mediated sintering mechanism. It is demonstrated that the sintering process shuts down after the solvent has completely evaporated.

  2. Printed assemblies of ultrathin, microscale inorganic light emitting diodes for deformable and semitransparent displays

    DOE Patents [OSTI]

    Rogers, John A; Nuzzo, Ralph; Kim, Hoon-sik; Brueckner, Eric; Park, Sang Il; Kim, Rak Hwan

    2014-10-21

    Described herein are printable structures and methods for making, assembling and arranging electronic devices. A number of the methods described herein are useful for assembling electronic devices where one or more device components are embedded in a polymer which is patterned during the embedding process with trenches for electrical interconnects between device components. Some methods described herein are useful for assembling electronic devices by printing methods, such as by dry transfer contact printing methods. Also described herein are GaN light emitting diodes and methods for making and arranging GaN light emitting diodes, for example for display or lighting systems.

  3. Using 3D Printing to Redesign Santa's Sleigh | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Using 3D Printing to Redesign Santa's Sleigh Click to email this to a friend (Opens in new window) Share on Facebook (Opens in new window) Click to share (Opens in new window) Click to share on LinkedIn (Opens in new window) Click to share on Tumblr (Opens in new window) Using 3D Printing to Redesign Santa's Sleigh Thomas The Elf 2013.12.03 Hello Everyone! I am so excited to be back this year to share another way GE researchers are taking part in the holiday cheer. In the past, we've utilized GE

  4. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and technological research. As the world's first third-generation synchrotron radiation source, the ALS offers outstanding performance in the VUV-soft x-ray energy range and...

  5. ALS Scientific Advisory Committee Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The SAC will meet as often as necessary but no less than twice a year. The deliberations of the SAC will be confidential to the extent legally possible. The ALS Director andor ...

  6. LANSCE | User Resources | Visitor Registration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visit Registration Users must register online at least: 4 weeks prior to experiment for U.S. citizens 2 months prior to experiment for foreign nationals. Lujan Center WNR Visit Registration Visit Registration

  7. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Diagnostic In-Vessel Electrical system Engineering Diagnostic In-Vessel Electrical system Engineering IDM UID TMWPFQ VERSION CREATED ON / VERSION / STATUS 05 Aug 2016 / 1.0 / Approved EXTERNAL REFERENCE / VERSION Page 1 of 6 Table of Contents 1 PURPOSE

  8. Screen printed silver top electrode for efficient inverted organic solar cells

    SciTech Connect (OSTI)

    Kim, Junwoo; Duraisamy, Navaneethan; Lee, Taik-Min; Kim, Inyoung; Choi, Kyung-Hyun

    2015-10-15

    Highlights: • Screen printing of silver pattern. • X-ray diffraction pattern confirmed the face centered cubic structure of silver. • Uniform surface morphology of silver pattern with sheet resistance of 0.06 Ω/sq. • The power conversion efficiency of fabricated solar cell is found to be 2.58%. - Abstract: The present work is mainly focused on replacement of the vacuum process for top electrode fabrication in organic solar cells. Silver top electrode deposited through solution based screen printing on pre-deposited polymeric thin film. The solution based printing technology provides uniform top electrode without damaging the underlying organic layers. The surface crystallinity and surface morphology of silver top electrode are examined through X-ray diffraction, field-emission scanning electron microscope and atomic force microscope. The purity of silver is examined through X-ray energy dispersive spectroscopy. The top electrode exhibits face centered cubic structure with homogeneous morphology. The sheet resistance of top electrode is found to be 0.06 Ω/sq and an average pattern thickness of ∼15 μm. The power conversion efficiency is 2.58%. Our work demonstrates that the solution based screen printing is a significant role in the replacement of vacuum process for the fabrication of top electrode in organic solar cells.

  9. Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.

    SciTech Connect (OSTI)

    Beck, David Franklin

    2011-01-01

    Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

  10. Guidelines for waste reduction and recycling: Metal finishing, electroplating, printed circuit board manufacturing

    SciTech Connect (OSTI)

    Not Available

    1989-07-01

    The guidance manual describes waste reduction techniques for metal finishing, metal fabricating, electroplating, and printed circuitboard manufacturing operations. Techniques which can be applied to a wide range of industrial processes and those which are process-specific are discussed. Evaporation, reverse osmosis, ion exchange, electrodialysis, ultrafiltration, and electrolytic recovery are described. The manual also describes waste reduction assessment procedures.

  11. 3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Maiti, A.; Small, W.; Lewicki, J.; Weisgraber, T. H.; Duoss, E. B.; Chinn, S. C.; Pearson, M. A.; Spadaccini, C. M.; Maxwell, R. S.; Wilson, T. S.

    2016-04-27

    3D printing of polymeric foams by direct-ink-write is a recent technological breakthrough that enables the creation of versatile compressible solids with programmable microstructure, customizable shapes, and tunable mechanical response including negative elastic modulus. However, in many applications the success of these 3D printed materials as a viable replacement for traditional stochastic foams critically depends on their mechanical performance and micro-architectural stability while deployed under long-term mechanical strain. To predict the long-term performance of the two types of foams we employed multi-year-long accelerated aging studies under compressive strain followed by a time-temperature-superposition analysis using a minimum-arc-length-based algorithm. The resulting master curvesmore » predict superior long-term performance of the 3D printed foam in terms of two different metrics, i.e., compression set and load retention. To gain deeper understanding, we imaged the microstructure of both foams using X-ray computed tomography, and performed finite-element analysis of the mechanical response within these microstructures. As a result, this indicates a wider stress variation in the stochastic foam with points of more extreme local stress as compared to the 3D printed material, which might explain the latter’s improved long-term stability and mechanical performance.« less

  12. Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing

    SciTech Connect (OSTI)

    New, Joshua Ryan

    2014-01-01

    Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

  13. ALS Capabilities Reveal Multiple Functions of Ebola Virus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reveal Multiple Functions of Ebola Virus Print A central dogma of molecular biology is that a protein's sequence dictates its fold, and the fold dictates its function....

  14. Microsoft Word - AL2006-11.doc

    Broader source: Energy.gov (indexed) [DOE]

    Guide Chapter 7.1, Acquisition Planning Acquisition Guide Chapter 42.5, Contract Management Planning When is this Acquisition Letter (AL) Effective? This AL is effective...

  15. ALS@20 Kick-Off Celebration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tribulations encountered during the construction of the ALS from former Director Jay Marx, current ALS Scientific Director Steve Kevan and Director Roger Falcone talked about...

  16. Report from the Committee of Visitors on its Review of the Processes and Procedures used to Manage the Theory and Computations Program, Fusion Energy Sciences Advisory Committee

    SciTech Connect (OSTI)

    none,

    2004-03-01

    A Committee of Visitors (COV) was formed to review the procedures used by the Office of Fusion Energy Sciences to manage its Theory and Computations program. The COV was pleased to conclude that the research portfolio supported by the OFES Theory and Computations Program was of very high quality. The Program supports research programs at universities, research industries, and national laboratories that are well regarded internationally and address questions of high relevance to the DOE. A major change in the management of the Theory and Computations program over the past few years has been the introduction of a system of comparative peer review to guide the OFES Theory Team in selecting proposals for funding. The COV was impressed with the success of OFES in its implementation of comparative peer review and with the quality of the reviewers chosen by the OFES Theory Team. The COV concluded that the competitive peer review process has improved steadily over the three years that it has been in effect and that it has improved both the fairness and accountability of the proposal review process. While the COV commends OFES in its implementation of comparative review, the COV offers the following recommendations in the hope that they will further improve the comparative peer review process: The OFES should improve the consistency of peer reviews. We recommend adoption of a “results-oriented” scoring system in their guidelines to referees (see Appendix II), a greater use of review panels, and a standard format for proposals; The OFES should further improve the procedures and documentation for proposal handling. We recommend that the “folders” documenting funding decisions contain all the input from all of the reviewers, that OFES document their rationale for funding decisions which are at variance with the recommendation of the peer reviewers, and that OFES provide a Summary Sheet within each folder; The OFES should better communicate the procedures used to

  17. A=17Al (1993TI07)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Al (1993TI07) (Not observed) See (1983ANZQ, 1988WA18, 1992AV03).

  18. ALSNews Vol. 304

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vol. 304 Print In This Issue Proofreading RNA: Structure of RNA Polymerase II's Backtracked State X-Ray Imaging of the Dynamic Magnetic Vortex Core Deformation Call for General User Proposals: Deadline January 15 ALS Job Posting: Deputy Division Director, Operations Light-Source Safety Officials Meet for Two-Day Workshop UEC Corner: New Members for 2010, Survey Results Welcome: Shauna Kanel and Clyde Lewis Around the Ring: Science Cafe, High-Profile Visitors Ring Status Notifications to Cell

  19. ALSNews Vol. 304

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vol. 304 Print In This Issue Proofreading RNA: Structure of RNA Polymerase II's Backtracked State X-Ray Imaging of the Dynamic Magnetic Vortex Core Deformation Call for General User Proposals: Deadline January 15 ALS Job Posting: Deputy Division Director, Operations Light-Source Safety Officials Meet for Two-Day Workshop UEC Corner: New Members for 2010, Survey Results Welcome: Shauna Kanel and Clyde Lewis Around the Ring: Science Cafe, High-Profile Visitors Ring Status Notifications to Cell

  20. ALSNews Vol. 304

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALSNews Vol. 304 Print In This Issue Proofreading RNA: Structure of RNA Polymerase II's Backtracked State X-Ray Imaging of the Dynamic Magnetic Vortex Core Deformation Call for General User Proposals: Deadline January 15 ALS Job Posting: Deputy Division Director, Operations Light-Source Safety Officials Meet for Two-Day Workshop UEC Corner: New Members for 2010, Survey Results Welcome: Shauna Kanel and Clyde Lewis Around the Ring: Science Cafe, High-Profile Visitors Ring Status Notifications to

  1. GraphPrints: Towards a Graph Analytic Method for Network Anomaly Detection

    SciTech Connect (OSTI)

    Harshaw, Chris R; Bridges, Robert A; Iannacone, Michael D; Reed, Joel W; Goodall, John R

    2016-01-01

    This paper introduces a novel graph-analytic approach for detecting anomalies in network flow data called \\textit{GraphPrints}. Building on foundational network-mining techniques, our method represents time slices of traffic as a graph, then counts graphlets\\textemdash small induced subgraphs that describe local topology. By performing outlier detection on the sequence of graphlet counts, anomalous intervals of traffic are identified, and furthermore, individual IPs experiencing abnormal behavior are singled-out. Initial testing of GraphPrints is performed on real network data with an implanted anomaly. Evaluation shows false positive rates bounded by 2.84\\% at the time-interval level, and 0.05\\% at the IP-level with 100\\% true positive rates at both.

  2. Fabrication of contacts for silicon solar cells including printing burn through layers

    SciTech Connect (OSTI)

    Ginley, David S; Kaydanova, Tatiana; Miedaner, Alexander; Curtis, Calvin J; Van Hest, Marinus Franciscus Antonius Maria

    2014-06-24

    A method for fabricating a contact (240) for a solar cell (200). The method includes providing a solar cell substrate (210) with a surface that is covered or includes an antireflective coating (220). For example, the substrate (210) may be positioned adjacent or proximate to an outlet of an inkjet printer (712) or other deposition device. The method continues with forming a burn through layer (230) on the coating (220) by depositing a metal oxide precursor (e.g., using an inkjet or other non-contact printing method to print or apply a volume of liquid or solution containing the precursor). The method includes forming a contact layer (240) comprising silver over or on the burn through layer (230), and then annealing is performed to electrically connect the contact layer (240) to the surface of the solar cell substrate (210) through a portion of the burn through layer (230) and the coating (220).

  3. Microsoft Word - AL2008-05.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy No. AL 2008-05 Acquisition Regulation Date 04/03/2008 ACQUISITION LETTER This Acquisition Letter is issued under the authority of the DOE and NNSA Procurement Executives. Subject: Environmental, Energy, and Transportation Management References: Executive Order 13423, dated January 24, 2007 Implementing Instructions, dated March 28, 2007 When is this Acquisition Letter (AL) effective? This AL is effective upon issuance. When does this AL Expire? This AL remains in effect

  4. LLNL researchers outline what happens during metal 3D printing, enhancing

    National Nuclear Security Administration (NNSA)

    confidence | National Nuclear Security Administration | (NNSA) LLNL researchers outline what happens during metal 3D printing, enhancing confidence Friday, February 19, 2016 - 12:00am NNSA Blog From left, Lawrence Livermore National Laboratory researchers Ibo Matthews, a principal investigator leading the lab's effort on the joint open source software project; Wayne King, director of the Accelerated Certification of Additively Manufactured Metals Initiative; and Gabe Guss, engineering

  5. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 May 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Mechanical and system engineering analysis for Diagnostics Magnetics systems This document describes technical needs for mechanical and system engineering analysis for ITER magnetic diagnostics systems. IDM UID T2CKM7 VERSION CREATED ON / VERSION / STATUS 29 Apr 2016 / 1.0 / Approved EXTERNAL REFERENCE / VERSION ITER_D_T2CKM7 Page 1 of 7 Table of

  6. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Technical specifications_Neutron Diagnostics project integration This document describes technical needs of ITER/TED/PPD Diagnostics Division, with particular reference to the requirement for engineering expertise for the Neutron Diagnostics project, integration and follow up activities, as appropriate. IDM UID TLA2Z4 VERSION CREATED ON / VERSION /

  7. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) RAMI Analysis for the Diagnostics systems The contract covers the following tasks (see details in Section 7 and 9): Determination of the electronics Quality Class (QC) and RAMI-based mitigation to achieve QC-3 for the electronics;Update of the RAMI analyses of ITER diagnostic systems, ports, port components and integrated assembly;Resolution of the

  8. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Design Justification and Engineering Validation Work_Technical specifications This document describes the technical needs for specialists in engineering of Diagnostics. Specifically the technical needs of the Diagnostics Division with particular reference to Design Justification and Engineering Validation Work. ITER is a major new device that is under

  9. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) PLM Project. Framework Contract for Engineering Support This document define theoverall frame andrequirements for engineering service contracts in order to support ITER Organization Central Team (IO-CT) in the implementation the PLM project. IDM UID SSZSGR VERSION CREATED ON / VERSION / STATUS 07 Jul 2016 / 1.3 / Approved EXTERNAL REFERENCE / VERSION

  10. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specification Summary Technical Specification - Requirement Management Framework Contract The following document provides the basic requirements to initiate the procurement of Requirement Management Services as part of a Call For Tender Process. Approval Process Name Action Affiliation Author Guigon A. 29 Jul 2016:signed IO/DG/COO/CIO/CMD Co-Authors Larrea J. 29 Jul 2016:signed

  11. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Technical Summary for Call for Nomination - TPI Supervision and Inspection Services Contract This Call for Nomination is to seek companies interested in participating in the tender for the Quality Control Inspection services contract. This technical summary provides requirements for Supplier of inspections services and Quality Control supervision tasks

  12. In the OSTI Collections: 3-D Printing and Other Additive Manufacturing

    Office of Scientific and Technical Information (OSTI)

    Technologies | OSTI, US Dept of Energy Office of Scientific and Technical Information 3-D Printing and Other Additive Manufacturing Technologies Dr. Watson computer sleuthing scientist. Article Acknowledgement: Dr. William N. Watson, Physicist DOE Office of Scientific and Technical Information Understanding Electron Beam Melting Is Additive Manufacturing Suitable? Two Projects Other Materials Additive Manufacturing Technologies References Reports Available Through OSTI's SciTech Connect

  13. SU-C-213-06: Dosimetric Verification of 3D Printed Electron Bolus

    SciTech Connect (OSTI)

    Rasmussen, K; Corbett, M; Pelletier, C; Huang, Z; Feng, Y; Jung, J

    2015-06-15

    Purpose: To determine the dosimetric effect of 3D printed bolus in an anthropomorphic phantom. Methods: Conformable bolus material was generated for an anthropomorphic phantom from a DICOM volume. The bolus generated was a uniform expansion of 5mm applied to the nose region of the phantom, as this is a difficult area to uniformly apply bolus clinically. A Printrbot metal 3D Printer using PLA plastic generated the bolus. A 9MeV anterior beam with a 5cm cone was used to deliver dose to the nose of the phantom. TLD measurements were compared to predicted values at the phantom surface. Film planes were analyzed for the printed bolus, a standard 5mm bolus sheet placed on the phantom, and the phantom with no bolus applied to determine depth and dose distributions. Results: TLDs measured within 2.5% of predicted value for the 3D bolus. Film demonstrated a more uniform dose distribution in the nostril region for the 3d printed bolus than the standard bolus. This difference is caused by the air gap created around the nostrils by the standard bolus, creating a secondary build-up region. Both demonstrated a 50% central axis dose shift of 5mm relative to the no bolus film. HU for the bolus calculated the PLA electron density to be ∼1.1g/cc. Physical density was measured to be 1.3g/cc overall. Conclusion: 3D printed PLA bolus demonstrates improved dosimetric performance to standard bolus for electron beams with complex phantom geometry.

  14. Flow-enhanced solution printing of all-polymer solar cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Diao, Ying; Zhou, Yan; Kurosawa, Tadanori; Shaw, Leo; Wang, Cheng; Park, Steve; Guo, Yikun; Reinspach, Julia A.; Gu, Kevin; Gu, Xiaodan; et al

    2015-08-12

    Morphology control of solution coated solar cell materials presents a key challenge limiting their device performance and commercial viability. Here we present a new concept for controlling phase separation during solution printing using an all-polymer bulk heterojunction solar cell as a model system. The key aspect of our method lies in the design of fluid flow using a microstructured printing blade, on the basis of the hypothesis of flow-induced polymer crystallization. Our flow design resulted in a similar to 90% increase in the donor thin film crystallinity and reduced microphase separated donor and acceptor domain sizes. The improved morphology enhancedmore » all metrics of solar cell device performance across various printing conditions, specifically leading to higher short-circuit current, fill factor, open circuit voltage and significantly reduced device-to-device variation. However, we expect our design concept to have broad applications beyond all-polymer solar cells because of its simplicity and versatility.« less

  15. Selective light sintering of Aerosol-Jet printed silver nanoparticle inks on polymer substrates

    SciTech Connect (OSTI)

    Schuetz, K. E-mail: hoerber@faps.uni-erlangen.de Hoerber, J. E-mail: hoerber@faps.uni-erlangen.de Franke, J. E-mail: hoerber@faps.uni-erlangen.de

    2014-05-15

    Printing silver nanoparticle inks to generate conductive structures for electronics on polymer substrates has gained increasing relevance in recent years. In this context, the Aerosol-Jet Technology is well suited to print silver ink on 3D-Molded Interconnect Devices (MID). The deposited ink requires thermal post-treatment to obtain sufficient electrical conductivity and adhesion. However, commonly used oven sintering cannot be applied for many thermoplastic substrates due to low melting temperatures. In this study a new sintering technology, selective light sintering, is presented, based on the focused, continuous light beam of a xenon lamp. Sintering experiments were conducted with Aerosol-Jet printed structures on various polycarbonate (PC) substrates. Especially on neat, light transparent PC, silver tracks were evenly sintered with marginal impact to the substrate. Electrical conductivities significantly exceed the values obtained with conventional oven sintering. Adhesive strength is sufficient for conductive tracks. Experiments with non-transparent PC substrates led to substrate damage due to increased light absorption. Therefore a concept for a variation of light sintering was developed, using optical filters. First experiments showed significant reduction of substrate damage and good sintering qualities. The highly promising results of the conducted experiments provide a base for further investigations to increase adhesion and qualifying the technology for MID applications and a broad spectrum of thermoplastic substrates.

  16. Ab initio modeling of zincblende AlN layer in Al-AlN-TiN multilayers

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yadav, S. K.; Wang, J.; Liu, X. -Y.

    2016-06-13

    An unusual growth mechanism of metastable zincblende AlN thin film by diffusion of nitrogen atoms into Al lattice is established. Using first-principles density functional theory, we studied the possibility of thermodynamic stability of AlN as a zincblende phase due to epitaxial strains and interface effect, which fails to explain the formation of zincblende AlN. We then compared the formation energetics of rocksalt and zincblende AlN in fcc Al through direct diffusion of nitrogen atoms to Al octahedral and tetrahedral interstitials. Furthermore, the formation of a zincblende AlN thin film is determined to be a kinetically driven process, not a thermodynamicallymore » driven process.« less

  17. Synthesis of AlN/Al Polycrystals along with Al Nanoparticles Using Thermal Plasma Route

    SciTech Connect (OSTI)

    Kanhe, Nilesh S.; Nawale, A. B.; Kulkarni, N. V.; Bhoraskar, S. V.; Mathe, V. L.; Das, A. K.

    2011-07-15

    This paper for the first time reports the (200) oriented growth of hexagonal Aluminum nitride crystals during synthesis of aluminum nanoparticles in dc transferred arc thermal plasma reactor by gas phase condensation in nitrogen plasma. The structural and morphological study of as synthesized AlN crystal and aluminium nanoparticles was done by using the x-ray diffraction method, scanning electron microscopy and transmission electron microscopy.

  18. AL2002-01.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-01.pdf AL2002-01.pdf PDF icon AL2002-01.pdf More Documents & Publications AL2002-04.pdf AL2002-08.pdf AL2002-06...

  19. AL2002-04.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4.pdf AL2002-04.pdf PDF icon AL2002-04.pdf More Documents & Publications AL2004-01r2.pdf AL2002-01.pdf AL2002-08...

  20. Microsoft Word - al2007-11.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    al2007-11.doc Microsoft Word - al2007-11.doc PDF icon Microsoft Word - al2007-11.doc More Documents & Publications Acquisition Letter: AL2005-08 Microsoft Word - al2004-03.doc OPAM...