National Library of Energy BETA

Sample records for view module sion

  1. Sparse-view proton computed tomography using modulated proton beams

    SciTech Connect (OSTI)

    Lee, Jiseoc; Kim, Changhwan; Cho, Seungryong; Min, Byungjun; Kwak, Jungwon; Park, Seyjoon; Lee, Se Byeong; Park, Sungyong

    2015-02-15

    Purpose: Proton imaging that uses a modulated proton beam and an intensity detector allows a relatively fast image acquisition compared to the imaging approach based on a trajectory tracking detector. In addition, it requires a relatively simple implementation in a conventional proton therapy equipment. The model of geometric straight ray assumed in conventional computed tomography (CT) image reconstruction is however challenged by multiple-Coulomb scattering and energy straggling in the proton imaging. Radiation dose to the patient is another important issue that has to be taken care of for practical applications. In this work, the authors have investigated iterative image reconstructions after a deconvolution of the sparsely view-sampled data to address these issues in proton CT. Methods: Proton projection images were acquired using the modulated proton beams and the EBT2 film as an intensity detector. Four electron-density cylinders representing normal soft tissues and bone were used as imaged object and scanned at 40 views that are equally separated over 360°. Digitized film images were converted to water-equivalent thickness by use of an empirically derived conversion curve. For improving the image quality, a deconvolution-based image deblurring with an empirically acquired point spread function was employed. They have implemented iterative image reconstruction algorithms such as adaptive steepest descent-projection onto convex sets (ASD-POCS), superiorization method–projection onto convex sets (SM-POCS), superiorization method–expectation maximization (SM-EM), and expectation maximization-total variation minimization (EM-TV). Performance of the four image reconstruction algorithms was analyzed and compared quantitatively via contrast-to-noise ratio (CNR) and root-mean-square-error (RMSE). Results: Objects of higher electron density have been reconstructed more accurately than those of lower density objects. The bone, for example, has been reconstructed

  2. Delamination Failures in Long-Term Field Aged PV Modules from Point of View of Encapsulant

    Broader source: Energy.gov [DOE]

    This PowerPoint presentation was originally given by Tsuyoshi Shioda of Mitsui Chemicals, Inc. on Feb. 26, 2014 during the opening session of the 2013 NREL PV Module Reliability Workshop. It summarizes the study of long-term, field-aged photovoltaic modules with typical delamination failures from the point of view of the encapsulant.

  3. FRm : John A. Deny, DitiSion Of

    Office of Legacy Management (LM)

    to : lieads of Divisions am3 Man DAW.: December 6, 1954 FRm : John A. Deny, DitiSion Of SPNBOL : csm-R:AcB The attached tabulation of active AEC contracts over $l,ooO,Mx) haa been ,xepared as a result of recurring requests fcr infmmatirm cm ow larger contracts. It consists ox- Pa-t I - E+ime contracts and Pert II - Sub- ccdxacts, and lists the contracts alphabetically bq Operations Office to shar; (1) tne of work being prformed by the contractcr; (2) contract rmter; (3).ac&ated dollar

  4. Modules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modules Modules Modules Approach to Managing The Environment Modules is a system which you can use to specify what software you want to use. If you want to use a particular software package loading its module will take care of the details of modifying your environment as necessary. The advantage of the modules approach is that the you are not required to explicitly specify paths for different executable versions and try to keep their related man paths and environment variables coordinated.

  5. U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

    Office of Legacy Management (LM)

    a . - 3 U. S. Attic Grsrgy 'bmiss~o3 U. S. Atomic lb-al-w CamLf3sion December 27, S.957

  6. Module Configuration

    DOE Patents [OSTI]

    Oweis, Salah; D'Ussel, Louis; Chagnon, Guy; Zuhowski, Michael; Sack, Tim; Laucournet, Gaullume; Jackson, Edward J.

    2002-06-04

    A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

  7. THE WIRED SURVEY. IV. NEW DUST DISKS FROM THE McCOOK and SION WHITE DWARF CATALOG

    SciTech Connect (OSTI)

    Hoard, D. W.; Wachter, Stefanie; Debes, John H.; Leisawitz, David T.; Cohen, Martin

    2013-06-10

    We have compiled photometric data from the Wide-field Infrared Survey Explorer All Sky Survey and other archival sources for the more than 2200 objects in the original McCook and Sion Catalog of Spectroscopically Identified White Dwarfs. We applied color-selection criteria to identify 28 targets whose infrared spectral energy distributions depart from the expectation for the white dwarf (WD) photosphere alone. Seven of these are previously known WDs with circumstellar dust disks, five are known central stars of planetary nebulae, and six were excluded for being known binaries or having possible contamination of their infrared photometry. We fit WD models to the spectral energy distributions of the remaining ten targets, and find seven new candidates with infrared excess suggesting the presence of a circumstellar dust disk. We compare the model dust disk properties for these new candidates with a comprehensive compilation of previously published parameters for known WDs with dust disks. It is possible that the current census of WDs with dust disks that produce an excess detectable at K-band and shorter wavelengths is close to complete for the entire sample of known WDs to the detection limits of existing near-IR all-sky surveys. The WD dust disk candidates now being found using longer wavelength infrared data are drawn from a previously underrepresented region of parameter space, in which the dust disks are overall cooler, narrower in radial extent, and/or contain fewer emitting grains.

  8. V-043: Perl Locale::Maketext Module '_compile()' Multiple Code...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    V-043: Perl Locale::Maketext Module 'compile()' Multiple Code Injection Vulnerabilities ... Arbitrary Code and View Arbitrary Files V-002: EMC NetWorker Module for Microsoft ...

  9. View Shed - Version 1.0

    Energy Science and Technology Software Center (OSTI)

    2014-09-18

    The View Shed library is a collection of Umbra modules that are used to calculate areas of visual coverage (view sheds). It maps high and low visibility areas and calculates sensor (camera placement for maximum coverage and performance. This assertion includes a managed C++ wrapper code (ViewShedWrapper) to enable C# applications, such as OpShed, to incorporate this library.

  10. Drupal Contributed Modules

    Energy Science and Technology Software Center (OSTI)

    2014-10-01

    These Drupal Modules extend the functionality of Drupal by including specific styles for dates and tabs, publishing options for scheduled and immediate publication of content modes, field visibility in content forms, keyword block filters (taxonomy based), adding content nodes to a specified queue for display in views, and status display of workflow settings.

  11. Delamination Failures in Long-Term Field Aged PV Modules from...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delamination Failures in Long-Term Field Aged PV Modules from Point of View of Encapsulant Delamination Failures in Long-Term Field Aged PV Modules from Point of View of ...

  12. Year Modules

    U.S. Energy Information Administration (EIA) Indexed Site

    Annual photovoltaic module shipments, 2004-2014 (peak kilowatts) Year Modules 2004 143,274 2005 204,996 2006 320,208 2007 494,148 2008 920,693 2009 1,188,879 2010 2,644,498 2011 3,772,075 2012 4,655,005 2013 4,984,881 2014 6,237,524 Source: U.S. Energy Information Administration, Form EIA-63B, 'Annual Photovoltaic Cell/Module Shipments Report.' Note: Includes both U.S. Shipments and Exports.

  13. Year Modules

    U.S. Energy Information Administration (EIA) Indexed Site

    dollars per peak watt) Year Modules 2004 $2.99 2005 $3.19 2006 $3.50 2007 $3.37 2008 $3.49 2009 $2.79 2010 $1.96 2011 $1.59 2012 $1.15 2013 $0.75 2014 $0.87 Table 4. Average value of photovoltaic modules, 2004-2014 Source: U.S. Energy Information Administration, Form EIA-63B, 'Annual Photovoltaic Cell/Module Shipments Report.' Note: Dollars are not adjusted for inflation.

  14. JOBAID-VIEWING USER RECORDS

    Broader source: Energy.gov [DOE]

    In this job aid you will View To-Do List using Filter and View options, View Completed Work, and View Curriculum Status and Detials areas. 

  15. ThreatView

    Energy Science and Technology Software Center (OSTI)

    2007-09-25

    The ThreatView project is based on our prior work with the existing ParaView open-source scientific visualization application. Where ParaView provides a grapical client optimized scientific visualization over the VTK parallel client server architecture, ThreatView provides a client optimized for more generic visual analytics over the same architecture. Because ThreatView is based on the VTK parallel client-server architecture, data sources can reside on remote hosts, and processing and rendering can be performed in parallel. As seenmore » in Fig. 1, ThreatView provides four main methods for visualizing data: Landscape View, which displays a graph using a landscape metaphor where clusters of graph nodes produce "hills" in the landscape; Graph View, which displays a graph using a traditional "ball-and-stick" style; Table View, which displays tabular data in a standard spreadsheet; and Attribute View, which displays a tabular "histogram" of input data - for a selected table column, the Attribute View displays each unique value within the column, and the number of times that value appears in the data. There are two supplemental view types: Text View, which displays tabular data one-record-at-a-time; and the Statistics View, which displays input metadata, such as the number of vertices and edges in a graph, the number of rows in a table, etc.« less

  16. Thermionic modules

    DOE Patents [OSTI]

    King, Donald B.; Sadwick, Laurence P.; Wernsman, Bernard R.

    2002-06-18

    Modules of assembled microminiature thermionic converters (MTCs) having high energy-conversion efficiencies and variable operating temperatures manufactured using MEMS manufacturing techniques including chemical vapor deposition. The MTCs incorporate cathode to anode spacing of about 1 micron or less and use cathode and anode materials having work functions ranging from about 1 eV to about 3 eV. The MTCs also exhibit maximum efficiencies of just under 30%, and thousands of the devices and modules can be fabricated at modest costs.

  17. Categorical ExcluSIon Determination Forn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    exercises and simulation I8lB 1.3 * Routine maintenance and custodial services DB 1,4 * Air conditioning installation for existing equipment DB 1.5 Cooling water system...

  18. Thermoelectric module

    DOE Patents [OSTI]

    Kortier, William E.; Mueller, John J.; Eggers, Philip E.

    1980-07-08

    A thermoelectric module containing lead telluride as the thermoelectric mrial is encapsulated as tightly as possible in a stainless steel canister to provide minimum void volume in the canister. The lead telluride thermoelectric elements are pressure-contacted to a tungsten hot strap and metallurgically bonded at the cold junction to iron shoes with a barrier layer of tin telluride between the iron shoe and the p-type lead telluride element.

  19. Failure and Degradation Modes of PV Modules in a Hot Dry Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Delamination Failures in Long-Term Field Aged PV Modules from Point of View of Encapsulant Accelerated Stress Testing, Qualification Testing, HAST, Field Experience

  20. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

    2012-07-17

    A photovoltaic (PV) module including a PV device and a frame. The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  1. Photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Lenox, Carl J. S.; Culligan, Matthew; Danning, Matt

    2013-08-27

    A photovoltaic (PV) module including a PV device and a frame, The PV device has a PV laminate defining a perimeter and a major plane. The frame is assembled to and encases the laminate perimeter, and includes leading, trailing, and side frame members, and an arm that forms a support face opposite the laminate. The support face is adapted for placement against a horizontal installation surface, to support and orient the laminate in a non-parallel or tilted arrangement. Upon final assembly, the laminate and the frame combine to define a unitary structure. The frame can orient the laminate at an angle in the range of 3.degree.-7.degree. from horizontal, and can be entirely formed of a polymeric material. Optionally, the arm incorporates integral feature(s) that facilitate interconnection with corresponding features of a second, identically formed PV module.

  2. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  3. Taking the long view

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Taking the long view Taking the long view on environmental stewardship A newly articulated mission for environmental stewardship at the Laboratory can be summed up in a simple phrase: clean up the past, control current operations, and create a sustainable future. March 20, 2012 Los Alamos Aerial Aerial view of a canyon in Los Alamos, New Mexico. Contact Environmental Communication & Public Outreach P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "The future viability of

  4. Taking the long view

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 Los Alamos Aerial Aerial view of a canyon in Los Alamos, New Mexico. Contact Environmental Communication & Public Outreach P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505)...

  5. ParaView

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... program in step 4 above. 1. Open ParaView and select File->Connect from the menu. 5. The server config script will start an xterm allowing you to login to the selected system. ...

  6. Electrostatically actuatable light modulating device

    DOE Patents [OSTI]

    Koehler, Dale R.

    1991-01-01

    The electrostatically actuatable light modulator utilizes an opaque substrate plate patterned with an array of aperture cells, the cells comprised of physically positionable dielectric shutters and electrostatic actuators. With incorporation of a light source and a viewing screen, a projection display system is effected. Inclusion of a color filter array aligned with the aperture cells accomplishes a color display. The system is realized in terms of a silicon based manufacturing technology allowing fabrication of a high resolution capability in a physically small device which with the utilization of included magnification optics allows both large and small projection displays.

  7. Ballasted photovoltaic module and module arrays

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt

    2011-11-29

    A photovoltaic (PV) module assembly including a PV module and a ballast tray. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes an arm. The ballast tray is adapted for containing ballast and is removably associated with the PV module in a ballasting state where the tray is vertically under the PV laminate and vertically over the arm to impede overt displacement of the PV module. The PV module assembly can be installed to a flat commercial rooftop, with the PV module and the ballast tray both resting upon the rooftop. In some embodiments, the ballasting state includes corresponding surfaces of the arm and the tray being spaced from one another under normal (low or no wind) conditions, such that the frame is not continuously subjected to a weight of the tray.

  8. Scannerless laser range imaging using loss modulation

    DOE Patents [OSTI]

    Sandusky, John V.

    2011-08-09

    A scannerless 3-D imaging apparatus is disclosed which utilizes an amplitude modulated cw light source to illuminate a field of view containing a target of interest. Backscattered light from the target is passed through one or more loss modulators which are modulated at the same frequency as the light source, but with a phase delay .delta. which can be fixed or variable. The backscattered light is demodulated by the loss modulator and detected with a CCD, CMOS or focal plane array (FPA) detector to construct a 3-D image of the target. The scannerless 3-D imaging apparatus, which can operate in the eye-safe wavelength region 1.4-1.7 .mu.m and which can be constructed as a flash LADAR, has applications for vehicle collision avoidance, autonomous rendezvous and docking, robotic vision, industrial inspection and measurement, 3-D cameras, and facial recognition.

  9. Module 4- Budgeting

    Broader source: Energy.gov [DOE]

    This module outlines basic costing concepts such as control accounts, work packages and planning packages.

  10. Modules Software Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules,

  11. REACTOR VIEWING APPARATUS

    DOE Patents [OSTI]

    Monk, G.S.

    1959-01-13

    An optical system is presented that is suitable for viewing objects in a region of relatively high radioactivity, or high neutron activity, such as a neutronic reactor. This optical system will absorb neutrons and gamma rays thereby protecting personnel fronm the harmful biological effects of such penetrating radiations. The optical system is comprised of a viewing tube having a lens at one end, a transparent solid member at the other end and a transparent aqueous liquid completely filling the tube between the ends. The lens is made of a polymerized organic material and the transparent solid member is made of a radiation absorbent material. A shield surrounds the tube betwcen the flanges and is made of a gamma ray absorbing material.

  12. Stereoscopic optical viewing system

    DOE Patents [OSTI]

    Tallman, C.S.

    1986-05-02

    An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

  13. Stereoscopic optical viewing system

    DOE Patents [OSTI]

    Tallman, Clifford S.

    1987-01-01

    An improved optical system which provides the operator a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

  14. Detailed Course Module Description

    Broader source: Energy.gov [DOE]

    This document lists the course modules for building science courses offered at Cornell's Collaborator Sustainable Buildingi Practice course.

  15. Module 8- Reporting

    Broader source: Energy.gov [DOE]

    This module illustrates and defines the different cost performance reports (CPR) available for reporting earned value information.

  16. Modulating lignin in plants

    DOE Patents [OSTI]

    Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

    2013-01-29

    Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

  17. Integrating Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Provides an overview of the complete National Energy Modeling System (NEMS) model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  18. The View from HQ

    National Nuclear Security Administration (NNSA)

    A publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs NA-ASC-500-07-Issue 3 May 2007 The View from HQ by Dimitri Kusnezov I have been spending much of my time these days thinking about science, technology and engineering and the role of the laboratories and how that will be reflected in the Complex of the future. This is on my mind for two reasons: one is my responsibility to produce a science and technology roadmap for Complex 2030-Defense Program's vision

  19. The BetterBuildings View

    Broader source: Energy.gov [DOE]

    The BetterBuildings View Newsletter, April 2011, from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  20. Protective laser beam viewing device

    DOE Patents [OSTI]

    Neil, George R.; Jordan, Kevin Carl

    2012-12-18

    A protective laser beam viewing system or device including a camera selectively sensitive to laser light wavelengths and a viewing screen receiving images from the laser sensitive camera. According to a preferred embodiment of the invention, the camera is worn on the head of the user or incorporated into a goggle-type viewing display so that it is always aimed at the area of viewing interest to the user and the viewing screen is incorporated into a video display worn as goggles over the eyes of the user.

  1. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces

  2. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1991-05-08

    This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  3. False color viewing device

    DOE Patents [OSTI]

    Kronberg, James W.

    1992-01-01

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  4. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1992-10-20

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  5. The view from Kiev

    SciTech Connect (OSTI)

    Kiselyov, S.

    1993-11-01

    This article reports the observations of correspondents for the Bulletin (two Russian journalists, one based in Moscow, the other in Kiev) who investigated the status of the Soviet Union's Black Sea Fleet and Ukraine's status as a non-nuclear-weapons state. After two years of wrangling and two earlier failed settlements, Russian President Boris Yeltsin met with Ukrainian President Leonid Kravchuk at Massandra in Crimea. On September 3, the leaders announced that Russia would buy out Ukraine's interest in the fleet and lease the port at Sevastopol. The Massandra summit was also supposed to settle Ukraine's status as a non-nuclear-weapons state. Described here are the Kiev-based correspondent's views on the Massandra summit (and its major topics), which was to have been called off by the Russian foreign ministry when Ukrainian Prime Minister Leonid Kuchma resigned.

  6. Mountain View Grand | Open Energy Information

    Open Energy Info (EERE)

    Mountain View Grand Jump to: navigation, search Name Mountain View Grand Facility Mountain View Grand Sector Wind energy Facility Type Small Scale Wind Facility Status In Service...

  7. Cavity enhanced terahertz modulation

    SciTech Connect (OSTI)

    Born, N.; Scheller, M.; Moloney, J. V.; Koch, M.

    2014-03-10

    We present a versatile concept for all optical terahertz (THz) amplitude modulators based on a Fabry-Prot semiconductor cavity design. Employing the high reflectivity of two parallel meta-surfaces allows for trapping selected THz photons within the cavity and thus only a weak optical modulation of the semiconductor absorbance is required to significantly damp the field within the cavity. The optical switching yields to modulation depths of more than 90% with insertion efficiencies of 80%.

  8. Module 3- Project Scheduling

    Broader source: Energy.gov [DOE]

    This module differentiates between planning and scheduling and outlines basic scheduling concepts, the logic relationships and critical path, and different schedule formats.

  9. Bracket for photovoltaic modules

    DOE Patents [OSTI]

    Ciasulli, John; Jones, Jason

    2014-06-24

    Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

  10. Fermilab | Tritium at Fermilab | Ferry Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ferry Creek Aerial View Ferry Creek Aerial View

  11. Fermilab | Tritium at Fermilab | Kress Creek Aerial View

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kress Creek Aerial View Kress Creek Aerial View

  12. Silicon photonic heater-modulator

    DOE Patents [OSTI]

    Zortman, William A.; Trotter, Douglas Chandler; Watts, Michael R.

    2015-07-14

    Photonic modulators, methods of forming photonic modulators and methods of modulating an input optical signal are provided. A photonic modulator includes a disk resonator having a central axis extending along a thickness direction of the disk resonator. The disk resonator includes a modulator portion and a heater portion. The modulator portion extends in an arc around the central axis. A PN junction of the modulator portion is substantially normal to the central axis.

  13. Highland View school | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Highland View school Highland View school Aerial showing Highland View school and surrounding homes

  14. Logs Perl Module

    Energy Science and Technology Software Center (OSTI)

    2007-04-04

    A perl module designed to read and parse the voluminous set of event or accounting log files produced by a Portable Batch System (PBS) server. This module can filter on date-time and/or record type. The data can be returned in a variety of formats.

  15. Module Safety Issues (Presentation)

    SciTech Connect (OSTI)

    Wohlgemuth, J.

    2012-02-01

    Description of how to make PV modules so that they are less likely to turn into safety hazards. Making modules inherently safer with minimum additional cost is the preferred approach for PV. Safety starts with module design to ensure redundancy within the electrical circuitry to minimize open circuits and proper mounting instructions to prevent installation related ground faults. Module manufacturers must control the raw materials and processes to ensure that that every module is built like those qualified through the safety tests. This is the reason behind the QA task force effort to develop a 'Guideline for PV Module Manufacturing QA'. Periodic accelerated stress testing of production products is critical to validate the safety of the product. Combining safer PV modules with better systems designs is the ultimate goal. This should be especially true for PV arrays on buildings. Use of lower voltage dc circuits - AC modules, DC-DC converters. Use of arc detectors and interrupters to detect arcs and open the circuits to extinguish the arcs.

  16. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, Jurgen

    1994-01-01

    A membrane module assembly adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation.

  17. Membrane module assembly

    DOE Patents [OSTI]

    Kaschemekat, J.

    1994-03-15

    A membrane module assembly is described which is adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation. 2 figures.

  18. Radiation View Factor With Shadowing

    Energy Science and Technology Software Center (OSTI)

    1992-02-24

    FACET calculates the radiation geometric view factor (alternatively called shape factor, angle factor, or configuration factor) between surfaces for axisymmetric, two-dimensional planar and three-dimensional geometries with interposed third surface obstructions. FACET was developed to calculate view factors as input data to finite element heat transfer analysis codes.

  19. Encapsulation of High Temperature Thermoelectric Modules | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Encapsulation of High Temperature Thermoelectric Modules Encapsulation of High Temperature Thermoelectric Modules Presents concept for hermetic encapsulation of TE modules ...

  20. Photovoltaic module and interlocked stack of photovoltaic modules

    SciTech Connect (OSTI)

    Wares, Brian S.

    2014-09-02

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  1. Photovoltaic module with removable wind deflector (Patent) |...

    Office of Scientific and Technical Information (OSTI)

    Photovoltaic module with removable wind deflector Title: Photovoltaic module with removable wind deflector A photovoltaic (PV) module assembly including a PV module, a deflector, ...

  2. Water heater control module

    DOE Patents [OSTI]

    Hammerstrom, Donald J

    2013-11-26

    An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

  3. Optical modulator including grapene

    DOE Patents [OSTI]

    Liu, Ming; Yin, Xiaobo; Zhang, Xiang

    2016-06-07

    The present invention provides for a one or more layer graphene optical modulator. In a first exemplary embodiment the optical modulator includes an optical waveguide, a nanoscale oxide spacer adjacent to a working region of the waveguide, and a monolayer graphene sheet adjacent to the spacer. In a second exemplary embodiment, the optical modulator includes at least one pair of active media, where the pair includes an oxide spacer, a first monolayer graphene sheet adjacent to a first side of the spacer, and a second monolayer graphene sheet adjacent to a second side of the spacer, and at least one optical waveguide adjacent to the pair.

  4. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony; Hollen, Robert M.; Erkkila, Tracy H.; Bronisz, Lawrence E.; Roybal, Jeffrey E.; Clark, Michael Leon

    1999-01-01

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  5. NERSC Python Modules (Edison Only)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Python Modules (Edison Only) NERSC Python Modules (Edison Only) Python Interpreter Modules To use the NERSC-built installation on Edison, type: module load python This loads the default version of the following useful core modules: python_base: Python 2.7.x module. numpy: Defines the numerical array and matrix type and basic operations on them. scipy: Uses numpy to do advanced math, signal processing, optimization, statistics and much more. matplotlib: Plotting/visualization library.

  6. Module bay with directed flow

    DOE Patents [OSTI]

    Torczynski, John R.

    2001-02-27

    A module bay requires less cleanroom airflow. A shaped gas inlet passage can allow cleanroom air into the module bay with flow velocity preferentially directed toward contaminant rich portions of a processing module in the module bay. Preferential gas flow direction can more efficiently purge contaminants from appropriate portions of the module bay, allowing a reduced cleanroom air flow rate for contaminant removal. A shelf extending from an air inlet slit in one wall of a module bay can direct air flowing therethrough toward contaminant-rich portions of the module bay, such as a junction between a lid and base of a processing module.

  7. NEMS International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  8. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    EIA NEMS International Energy Module Model Documentation Report vii Mr. G. Daniel Butler U.S. Department of Energy EI-812 1000 Independence Ave., SW Washington, DC 20585 Tel:...

  9. GREET Pretreatment Module

    SciTech Connect (OSTI)

    Adom, Felix K.; Dunn, Jennifer B.; Han, Jeongwoo

    2014-09-01

    A wide range of biofuels and biochemicals can be produced from biomass via different pretreatment technologies that yield sugars. This report documents the material and energy flows that occur when fermentable sugars from four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar) are produced via dilute acid pretreatment and ammonia fiber expansion. These flows are documented for inclusion in the pretreatment module of the Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. Process simulations of each pretreatment technology were developed in Aspen Plus. Material and energy consumption data from Aspen Plus were then compiled in the GREET pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

  10. International Energy Module

    Gasoline and Diesel Fuel Update (EIA)

    self-contained units which are linked by an integrating mechanism. The NEMS International Energy Module (IEM) computes world oil prices, provides a set of crude oil and refined...

  11. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, Dale K.; Rankin, Richard A.

    1991-02-26

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

  12. Digital optical conversion module

    DOE Patents [OSTI]

    Kotter, D.K.; Rankin, R.A.

    1988-07-19

    A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

  13. Photovoltaic module reliability workshop

    SciTech Connect (OSTI)

    Mrig, L.

    1990-01-01

    The paper and presentations compiled in this volume form the Proceedings of the fourth in a series of Workshops sponsored by Solar Energy Research Institute (SERI/DOE) under the general theme of photovoltaic module reliability during the period 1986--1990. The reliability Photo Voltaic (PV) modules/systems is exceedingly important along with the initial cost and efficiency of modules if the PV technology has to make a major impact in the power generation market, and for it to compete with the conventional electricity producing technologies. The reliability of photovoltaic modules has progressed significantly in the last few years as evidenced by warranties available on commercial modules of as long as 12 years. However, there is still need for substantial research and testing required to improve module field reliability to levels of 30 years or more. Several small groups of researchers are involved in this research, development, and monitoring activity around the world. In the US, PV manufacturers, DOE laboratories, electric utilities and others are engaged in the photovoltaic reliability research and testing. This group of researchers and others interested in this field were brought together under SERI/DOE sponsorship to exchange the technical knowledge and field experience as related to current information in this important field. The papers presented here reflect this effort.

  14. Sion Power Corp formerly Moltech Corp | Open Energy Information

    Open Energy Info (EERE)

    Sector: Vehicles Product: Tucson, Arizona-based privately held developer of thin-film lithium-sulfur rechargeable batteries for propelling vehicles and other high energy-density...

  15. CategorIcal ExcluSIon Determination 1,'orn1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements OA 15 - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  16. Categ orical ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA 14 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  17. CategorIcal ExcluSIon DetermInation Fornl

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Guidelines OA I 4 - Approval of technical exchange arrangements DAIS - International umbrella agreements for energy R&D Facility Operations DB 1.2 - Training exercises and...

  18. Power module assembly

    DOE Patents [OSTI]

    Campbell, Jeremy B.; Newson, Steve

    2011-11-15

    A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

  19. Printed Module Interconnects

    SciTech Connect (OSTI)

    Stockert, Talysa R.; Fields, Jeremy D.; Pach, Gregory F.; Mauger, Scott A.; van Hest, Maikel F. A. M.

    2015-06-14

    Monolithic interconnects in photovoltaic modules connect adjacent cells in series, and are typically formed sequentially involving multiple deposition and scribing steps. Interconnect widths of 500 um every 10 mm result in 5% dead area, which does not contribute to power generation in an interconnected solar panel. This work expands on previous work that introduced an alternative interconnection method capable of producing interconnect widths less than 100 um. The interconnect is added to the module in a single step after deposition of the photovoltaic stack, eliminating the need for scribe alignment. This alternative method can be used for all types of thin film photovoltaic modules. Voltage addition with copper-indium-gallium-diselenide (CIGS) solar cells using a 2-scribe printed interconnect approach is demonstrated. Additionally, interconnect widths of 250 um are shown.

  20. Flexible programmable logic module

    DOE Patents [OSTI]

    Robertson, Perry J.; Hutchinson, Robert L.; Pierson, Lyndon G.

    2001-01-01

    The circuit module of this invention is a VME board containing a plurality of programmable logic devices (PLDs), a controlled impedance clock tree, and interconnecting buses. The PLDs are arranged to permit systolic processing of a problem by offering wide data buses and a plurality of processing nodes. The board contains a clock reference and clock distribution tree that can drive each of the PLDs with two critically timed clock references. External clock references can be used to drive additional circuit modules all operating from the same synchronous clock reference.

  1. Photovoltaic module and interlocked stack of photovoltaic modules

    DOE Patents [OSTI]

    Wares, Brian S.

    2012-09-04

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  2. Wide field of view telescope

    DOE Patents [OSTI]

    Ackermann, Mark R.; McGraw, John T.; Zimmer, Peter C.

    2008-01-15

    A wide field of view telescope having two concave and two convex reflective surfaces, each with an aspheric surface contour, has a flat focal plane array. Each of the primary, secondary, tertiary, and quaternary reflective surfaces are rotationally symmetric about the optical axis. The combination of the reflective surfaces results in a wide field of view in the range of approximately 3.8.degree. to approximately 6.5.degree.. The length of the telescope along the optical axis is approximately equal to or less than the diameter of the largest of the reflective surfaces.

  3. Formed photovoltaic module busbars

    SciTech Connect (OSTI)

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  4. Method of monolithic module assembly

    DOE Patents [OSTI]

    Gee, James M.; Garrett, Stephen E.; Morgan, William P.; Worobey, Walter

    1999-01-01

    Methods for "monolithic module assembly" which translate many of the advantages of monolithic module construction of thin-film PV modules to wafered c-Si PV modules. Methods employ using back-contact solar cells positioned atop electrically conductive circuit elements affixed to a planar support so that a circuit capable of generating electric power is created. The modules are encapsulated using encapsulant materials such as EVA which are commonly used in photovoltaic module manufacture. The methods of the invention allow multiple cells to be electrically connected in a single encapsulation step rather than by sequential soldering which characterizes the currently used commercial practices.

  5. Thermoelectrics Partnership: Automotive Thermoelectric Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel Nanostructured Interface Solution for Automotive ...

  6. Detailed Course Module Description | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Detailed Course Module Description Detailed Course Module Description This document lists the course modules for building science courses offered at Cornell's Collaborator...

  7. Photovoltaic module with removable wind deflector (Patent) |...

    Office of Scientific and Technical Information (OSTI)

    Patent: Photovoltaic module with removable wind deflector Citation Details In-Document Search Title: Photovoltaic module with removable wind deflector A photovoltaic (PV) module ...

  8. Module Solar AG | Open Energy Information

    Open Energy Info (EERE)

    Module Solar AG Jump to: navigation, search Name: Module Solar AG Place: Baar, Switzerland Product: A Swiss PV module and materials supplier and developer Coordinates: 40.808083,...

  9. Module isolation devices

    SciTech Connect (OSTI)

    Carolan, Michael Francis; Cooke, John Albert; Buzinski, Michael David

    2010-04-27

    A gas flow isolation device includes a gas flow isolation valve movable from an opened condition to a closed condition. The module isolation valve in one embodiment includes a rupture disk in flow communication with a flow of gas when the module isolation valve is in an opened condition. The rupture disk ruptures when a predetermined pressure differential occurs across it causing the isolation valve to close. In one embodiment the valve is mechanically linked to the rupture disk to maintain the valve in an opened condition when the rupture disk is intact, and which permits the valve to move into a closed condition when the rupture disk ruptures. In another embodiment a crushable member maintains the valve in an open condition, and the flow of gas passed the valve upon rupturing of the rupture disk compresses the crushable member to close the isolation valve.

  10. VERDE Analytic Modules

    Energy Science and Technology Software Center (OSTI)

    2008-01-15

    The Verde Analytic Modules permit the user to ingest openly available data feeds about phenomenology (storm tracks, wind, precipitation, earthquake, wildfires, and similar natural and manmade power grid disruptions and forecast power outages, restoration times, customers outaged, and key facilities that will lose power. Damage areas are predicted using historic damage criteria of the affected area. The modules use a cellular automata approach to estimating the distribution circuits assigned to geo-located substations. Population estimates servedmore » within the service areas are located within 1 km grid cells and converted to customer counts by conversion through demographic estimation of households and commercial firms within the population cells. Restoration times are estimated by agent-based simulation of restoration crews working according to utility published prioritization calibrated by historic performance.« less

  11. 2015 PV Module Reliability Workshop

    Broader source: Energy.gov [DOE]

    The National Renewable Energy Laboratory hosts an annual Photovoltaic (PV) Module Reliability Workshop so that solar technology experts can share information leading to the improvement of PV module reliability. Improvements to module reliability reduce the cost of solar electricity and promotes investor confidence in the technology—both critical goals for moving PV technologies deeper into the electricity marketplace.

  12. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, Ian J. (Albuquerque, NM); Wendt, Joel R. (Albuquerque, NM)

    1994-01-01

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors.

  13. Tandem resonator reflectance modulator

    DOE Patents [OSTI]

    Fritz, I.J.; Wendt, J.R.

    1994-09-06

    A wide band optical modulator is grown on a substrate as tandem Fabry-Perot resonators including three mirrors spaced by two cavities. The absorption of one cavity is changed relative to the absorption of the other cavity by an applied electric field, to cause a change in total reflected light, as light reflecting from the outer mirrors is in phase and light reflecting from the inner mirror is out of phase with light from the outer mirrors. 8 figs.

  14. Views of the solar system

    SciTech Connect (OSTI)

    Hamilton, C.

    1995-02-01

    Views of the Solar System has been created as an educational tour of the solar system. It contains images and information about the Sun, planets, moons, asteroids and comets found within the solar system. The image processing for many of the images was done by the author. This tour uses hypertext to allow space travel by simply clicking on a desired planet. This causes information and images about the planet to appear on screen. While on a planet page, hyperlinks travel to pages about the moons and other relevant available resources. Unusual terms are linked to and defined in the Glossary page. Statistical information of the planets and satellites can be browsed through lists sorted by name, radius and distance. History of Space Exploration contains information about rocket history, early astronauts, space missions, spacecraft and detailed chronology tables of space exploration. The Table of Contents page has links to all of the various pages within Views Of the Solar System.

  15. For current viewing resistor loads

    DOE Patents [OSTI]

    Lyons, Gregory R.; Hass, Jay B.

    2011-04-19

    The invention comprises a terminal unit for a flat cable comprising a BNC-PCB connector having a pin for electrically contacting one or more conducting elements of a flat cable, and a current viewing resistor having an opening through which the pin extends and having a resistor face that abuts a connector face of the BNC-PCB connector, wherein the device is a terminal unit for the flat cable.

  16. Microsystem enabled photovoltaic modules and systems

    DOE Patents [OSTI]

    Nielson, Gregory N; Sweatt, William C; Okandan, Murat

    2015-05-12

    A microsystem enabled photovoltaic (MEPV) module including: an absorber layer; a fixed optic layer coupled to the absorber layer; a translatable optic layer; a translation stage coupled between the fixed and translatable optic layers; and a motion processor electrically coupled to the translation stage to controls motion of the translatable optic layer relative to the fixed optic layer. The absorber layer includes an array of photovoltaic (PV) elements. The fixed optic layer includes an array of quasi-collimating (QC) micro-optical elements designed and arranged to couple incident radiation from an intermediate image formed by the translatable optic layer into one of the PV elements such that it is quasi-collimated. The translatable optic layer includes an array of focusing micro-optical elements corresponding to the QC micro-optical element array. Each focusing micro-optical element is designed to produce a quasi-telecentric intermediate image from substantially collimated radiation incident within a predetermined field of view.

  17. TASMANIAN Sparse Grids Module

    Energy Science and Technology Software Center (OSTI)

    2013-09-20

    Sparse Grids are the family of methods of choice for multidimensional integration and interpolation in low to moderate number of dimensions. The method is to select extend a one dimensional set of abscissas, weights and basis functions by taking a subset of all possible tensor products. The module provides the ability to create global and local approximations based on polynomials and wavelets. The software has three components, a library, a wrapper for the library thatmore » provides a command line interface via text files ad a MATLAB interface via the command line tool.« less

  18. TASMANIAN Sparse Grids Module

    SciTech Connect (OSTI)

    and Drayton Munster, Miroslav Stoyanov

    2013-09-20

    Sparse Grids are the family of methods of choice for multidimensional integration and interpolation in low to moderate number of dimensions. The method is to select extend a one dimensional set of abscissas, weights and basis functions by taking a subset of all possible tensor products. The module provides the ability to create global and local approximations based on polynomials and wavelets. The software has three components, a library, a wrapper for the library that provides a command line interface via text files ad a MATLAB interface via the command line tool.

  19. Processing module operating methods, processing modules, and communications systems

    DOE Patents [OSTI]

    McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

    2014-09-09

    A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

  20. Phase modulation in RF tag

    DOE Patents [OSTI]

    Carrender, Curtis Lee; Gilbert, Ronald W.

    2007-02-20

    A radio frequency (RF) communication system employs phase-modulated backscatter signals for RF communication from an RF tag to an interrogator. The interrogator transmits a continuous wave interrogation signal to the RF tag, which based on an information code stored in a memory, phase-modulates the interrogation signal to produce a backscatter response signal that is transmitted back to the interrogator. A phase modulator structure in the RF tag may include a switch coupled between an antenna and a quarter-wavelength stub; and a driver coupled between the memory and a control terminal of the switch. The driver is structured to produce a modulating signal corresponding to the information code, the modulating signal alternately opening and closing the switch to respectively decrease and increase the transmission path taken by the interrogation signal and thereby modulate the phase of the response signal. Alternatively, the phase modulator may include a diode coupled between the antenna and driver. The modulating signal from the driver modulates the capacitance of the diode, which modulates the phase of the response signal reflected by the diode and antenna.

  1. Better Buildings Network View | February 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  2. Better Buildings Network View | September 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  3. Better Buildings Network View | June 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  4. Better Buildings Network View | May 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  5. Better Buildings Network View | June 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  6. Better Buildings Network View | October 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  7. Better Buildings Network View | October 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  8. The Better Buildings Neighborhood View-- July 2012

    Broader source: Energy.gov [DOE]

    The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program.

  9. Better Buildings Network View | January 2016

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  10. Better Buildings Network View | February 2016

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  11. Better Buildings Network View | January 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  12. Better Buildings Network View | November 2015

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  13. The Better Buildings Neighborhood View-- May 2012

    Broader source: Energy.gov [DOE]

    The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program

  14. Better Buildings Network View | May 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  15. Photovoltaic module and module arrays (Patent) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    with corresponding features of a second, identically formed PV module. ... Country of Publication: United States Language: English Word Cloud More Like This Full Text ...

  16. Modulated preheating and isocurvature perturbations

    SciTech Connect (OSTI)

    Enqvist, Kari; Rusak, Stanislav E-mail: stanislav.rusak@helsinki.fi

    2013-03-01

    We consider a model of preheating where the coupling of the inflaton to the preheat field is modulated by an additional scalar field which is light during inflation. We establish that such a model produces the observed curvature perturbation analogously to the modulated reheating scenario. The contribution of modulated preheating to the power spectrum and to non-Gaussianity can however be significantly larger compared to modulated perturbative reheating. We also consider the implications of the current constraints on isocurvature perturbations in case where the modulating field is responsible for cold dark matter. We find that existing bounds on CDM isocurvature perturbations imply that modulated preheating is unlikely to give a dominant contribution to the curvature perturbation and that the same bounds suggest important constraints on non-Gaussianity and the amount of primordial gravitational waves.

  17. Photovoltaic concentrator module improvements study

    SciTech Connect (OSTI)

    Levy, S.L.; Kerschen, K.A. ); Hutchison, G. ); Nowlan, M.J. )

    1991-08-01

    This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

  18. Module 2- Work Breakdown Structure

    Broader source: Energy.gov [DOE]

    This module defines and illustrates the Work Breakdown Structure (WBS), WBS dictionary, Organizational Breakdown Structure (OBS) and Responsibility Assignment Matrix (RAM).

  19. module 4 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 HR5 TRANSITION BRIEFING PDF icon module 4 More Documents & Publications Microsoft Word - Rev5functionalaccountabilityimplementationplan..doc High Risk Plan Department of...

  20. International Energy Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Summarizes the overall structure of the International Energy Model and its interface with other NEMS modules, mathematical specifications of behavioral relationships, and data sources and estimation methods.

  1. Fortran 90 Source Module

    Energy Science and Technology Software Center (OSTI)

    1998-01-13

    A major advance contained in the new Fortran 90 language standard is the ability to define new data types and the operators associated with them. Writing computer code to implement computations with real and complex three domensional vectors and dyadics is greatly simplified if the equations can be implemented directly, without the need to code the vector arithmetic explicitly. The Fortran 90 module VECTORS contains source code which defines new data types for real andmore » complex 3-dimensional vectors and dyadics, along with the common operations needed to work with these objects. Routines to allow convenient initalization and output of the new types are also included. in keeping with the philosophy of data abstraction, the details of the implementation of the data types are maintained private, and the functions and operators are made generic to simplify the combining of real, complex, single and double precision vectors and dyadics.« less

  2. Light modulating device

    DOE Patents [OSTI]

    Rauh, R. David; Goldner, Ronald B.

    1989-01-01

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

  3. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

    2012-09-18

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  4. Photovoltaic module mounting system

    DOE Patents [OSTI]

    Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N.; Holland, Rodney H.

    2012-04-17

    A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

  5. Light modulating device

    DOE Patents [OSTI]

    Rauh, R.D.; Goldner, R.B.

    1989-12-26

    In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

  6. Low-voltage differentially-signaled modulators

    SciTech Connect (OSTI)

    Zortman, William A.; Lentine, Anthony L.; Hsia, Alexander H.; Watts, Michael R.

    2015-09-08

    Photonic modulators and methods of modulating an input optical signal are provided. A photonic modulator includes at least one modulator section and differential drive circuitry. The at least one modulator section includes a P-type layer and an N-type layer forming a PN junction in the modulator section. The differential drive circuitry is electrically coupled to the P-type layer and the N-type layer of the at least one modulator section.

  7. Urban Sustainability Water Module

    Energy Science and Technology Software Center (OSTI)

    1998-09-22

    Most urban areas are experiencing substantial growth rate. In order to support the growth and still maintain the high quality of life currently available in these areas, government planners, and developers and general stakeholders are very interested in a product that will allow them to experiment with different development scenarios to determine the best path forward. One of the biggest concerns is the amount of water that will be available as the growth continues. Thismore » software package will allow them as a group to input their ideas and get a visual view of the results, immediately. They will be able to watch the water resources as they are consumed by the increasing growth in residential, commercial and industrial areas.« less

  8. Prairie View Gas Recovery Biomass Facility | Open Energy Information

    Open Energy Info (EERE)

    View Gas Recovery Biomass Facility Jump to: navigation, search Name Prairie View Gas Recovery Biomass Facility Facility Prairie View Gas Recovery Sector Biomass Facility Type...

  9. The Better Buildings Neighborhood View - September 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BB Neighborhood View -- September 2012 (140.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- July ...

  10. Argonne's SpEC Module

    ScienceCinema (OSTI)

    Harper, Jason

    2014-06-05

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  11. Argonne's SpEC Module

    SciTech Connect (OSTI)

    Harper, Jason

    2014-05-05

    Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

  12. Macroeconomic Activity Module - NEMS Documentation

    Reports and Publications (EIA)

    2016-01-01

    Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 2016 (AEO2016). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code

  13. Macroeconomic Activity Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Macroeconomic Activity Module (MAM) used to develop the Annual Energy Outlook for 2014 (AEO2014). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code

  14. Working with Modules within Perl and Python

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python scripts. You can do this! Using Modules within Python The EnvironmentModules python package gives access to the module system from within python. The EnvironmentModules python package has a single function: module. Using this function you can provide the same arguments you would to "module" on the command line. The

  15. Force Modulator System

    SciTech Connect (OSTI)

    Redmond Clark

    2009-04-30

    Many metal parts manufacturers use large metal presses to shape sheet metal into finished products like car body parts, jet wing and fuselage surfaces, etc. These metal presses take sheet metal and - with enormous force - reshape the metal into a fully formed part in a manner of seconds. Although highly efficient, the forces involved in forming metal parts also damage the press itself, limit the metals used in part production, slow press operations and, when not properly controlled, cause the manufacture of large volumes of defective metal parts. To date, the metal-forming industry has not been able to develop a metal-holding technology that allows full control of press forces during the part forming process. This is of particular importance in the automotive lightweighting efforts under way in the US automotive manufacturing marketplace. Metalforming Controls Technology Inc. (MC2) has developed a patented press control system called the Force Modulator that has the ability to control these press forces, allowing a breakthrough in stamping process control. The technology includes a series of hydraulic cylinders that provide controlled tonnage at all points in the forming process. At the same time, the unique cylinder design allows for the generation of very high levels of clamping forces (very high tonnages) in very small spaces; a requirement for forming medium and large panels out of HSS and AHSS. Successful production application of these systems testing at multiple stamping operations - including Ford and Chrysler - has validated the capabilities and economic benefits of the system. Although this technology has been adopted in a number of stamping operations, one of the primary barriers to faster adoption and application of this technology in HSS projects is system cost. The cost issue has surfaced because the systems currently in use are built for each individual die as a custom application, thus driving higher tooling costs. This project proposed to better

  16. December 2015 Most Viewed Documents for Renewable Energy Sources | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information December 2015 Most Viewed Documents for Renewable Energy Sources Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines Sheldahl, R E; Klimas, P C (1981) 307 Calculation of brine properties. [Above 80/sup 0/F and for salt content between 5 and 25%] Dittman, G.L. (1977) 228 Temperature coefficients for PV modules and arrays:

  17. January 2013 Most Viewed Documents for Renewable Energy Sources | OSTI, US

    Office of Scientific and Technical Information (OSTI)

    Dept of Energy Office of Scientific and Technical Information January 2013 Most Viewed Documents for Renewable Energy Sources Photovoltaic Materials Duty, C.; Angelini, J.; Armstrong, B.; Bennett, C.; Evans, B.; Jellison, G. E.; Joshi, P.; List, F.; Paranthaman, P.; Parish, C.; Wereszczak, A. High Efficiency CdTe and CIGS Thin Film Solar Cells: Highlights of the Technologies Challenges (Presentation) Noufi, R. Accelerated UV Test Methods for Encapsulants of Photovoltaic Modules

  18. OCGen Module Mooring Project

    SciTech Connect (OSTI)

    McEntee, Jarlath

    2015-02-06

    Ocean Renewable Power Company's OCGen Module Mooring Project provided an extensive research, design, development, testing and data collection effort and analysis conducted with respect to a positively buoyant, submerged MHK device secured to the seabed using a tensioned mooring system. Different analytic tools were evaluated for their utility in the design of submerged systems and their moorings. Deployment and testing of a prototype OCGen® system provided significant data related to mooring line loads and system attitude and station keeping. Mooring line loads were measured in situ and reported against flow speeds. The Project made a significant step in the development of designs, methodologies and practices related to floating and mooring of marine hydrokinetic (MHK) devices. Importantly for Ocean Renewable Power Company, the Project provided a sound basis for advancing a technically and commercially viable OCGen® Power System. The OCGen® Power System is unique in the MHK industry and, in itself, offers distinct advantages of MHK devices that are secured to the seabed using fixed structural frames. Foremost among these advantages are capital and operating cost reductions and increased power extraction by allowing the device to be placed at the most energetic level of the water column.

  19. Common Geometry Module

    Energy Science and Technology Software Center (OSTI)

    2005-01-01

    The Common Geometry Module (CGM) is a code library which provides geometry functionality used for mesh generation and other applications. This functionality includes that commonly found in solid modeling engines, like geometry creation, query and modification; CGM also includes capabilities not commonly found in solid modeling engines, like geometry decomposition tools and support for shared material interfaces. CGM is built upon the ACIS solid modeling engine, but also includes geometry capability developed beside and onmore » top of ACIS. CGM can be used as-is to provide geometry functionality for codes needing this capability. However, CGM can also be extended using derived classes in C++, allowing the geometric model to serve as the basis for other applications, for example mesh generation. CGM is supported on Sun Solaris, SGI, HP, IBM, DEC, Linux and Windows NT platforms. CGM also indudes support for loading ACIS models on parallel computers, using MPI-based communication. Future plans for CGM are to port it to different solid modeling engines, including Pro/Engineer or SolidWorks. CGM is being released into the public domain under an LGPL license; the ACIS-based engine is available to ACIS licensees on request.« less

  20. High Performance Builder Spotlight: Clifton View Homes

    SciTech Connect (OSTI)

    2011-01-01

    Clifton View Homes’s remodel of a 1962 rambler, on Whidbey Island in Washington State, cut energy costs by two-thirds.

  1. Working with Modules within Perl and Python

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python...

  2. Microsoft PowerPoint - FinalModule8.ppt

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Prepared by: Booz Allen Hamilton Module 8: Government Required Reports Welcome to Module ... Prepared by: Booz Allen Hamilton Review of Previous Modules In the previous seven modules, ...

  3. Photovoltaic module with adhesion promoter

    DOE Patents [OSTI]

    Xavier, Grace

    2013-10-08

    Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

  4. Better Buildings Network View | April 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | April 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2015 (155.77 KB) More Documents & Publications Better Buildings Network View | May 2015 Better Buildings Network View | March 2015 Better Buildings Network View | July-August

  5. Better Buildings Network View | April 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | April 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2016 (154.45 KB) More Documents & Publications Better Buildings Network View | May 2016 Better Buildings Network View | June 2016 Better Buildings Network View | January 2016

  6. Better Buildings Network View | February 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | February 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View February 2014 (173.15 KB) More Documents & Publications Better Buildings Network View | January 2014 Better Buildings Network View | May 2015 Better Buildings Network View | June 2015

  7. Better Buildings Network View | June 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | June 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View June 2016 (235.96 KB) More Documents & Publications Better Buildings Network View | November 2015 Better Buildings Network View | April 2016 Better Buildings Network View | May 2016

  8. Better Buildings Network View | March 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | March 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2014 (129.73 KB) More Documents & Publications Better Buildings Network View | June 2015 Better Buildings Network View | May 2015 Better Buildings Network View | April 2014

  9. Better Buildings Network View | March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | March 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2015 (264.47 KB) More Documents & Publications Better Buildings Network View | January 2015 Better Buildings Network View | December 2014 Better Buildings Network View | April 2015

  10. Better Buildings Network View | March 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | March 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View March 2016 (211.92 KB) More Documents & Publications Better Buildings Network View | April 2016 Better Buildings Network View | May 2016 Better Buildings Network View | February 2016

  11. Better Buildings Network View | May 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | May 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View May 2016 (196.19 KB) More Documents & Publications Better Buildings Network View | April 2016 Better Buildings Network View | June 2016 Better Buildings Network View | January 2016

  12. The Better Buildings Neighborhood View -- April 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- April 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- April 2012 (136.63 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View -- July 2012

  13. The Better Buildings Neighborhood View -- April 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- April 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - April 2013. BB Neighborhood View -- April 2013 (152.71 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View -- December 2013

  14. The Better Buildings Neighborhood View -- Fall 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall 2011 The Better Buildings Neighborhood View -- Fall 2011 Better Buildings Neighborhood View, from the Better Buildings Neighborhood Program of the U.S. Department of Energy. BB Neighborhood View -- Fall 2011 (204.44 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- December 2013

  15. The Better Buildings Neighborhood View -- January 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 2 The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- January 2012 (214.32 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- February 2012 The BetterBuildings View

  16. The Better Buildings Neighborhood View -- July 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - July 2013. BB Neighborhood View -- July 2013 (187 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- December 2013

  17. The Better Buildings Neighborhood View -- June 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 2012 The Better Buildings Neighborhood View -- June 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- June 2012 (150.31 KB) More Documents & Publications The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View -- April 2012

  18. Ubbink Solar Modules BV | Open Energy Information

    Open Energy Info (EERE)

    Solar Modules BV Place: Cologne, North Rhine-Westphalia, Germany Zip: 50933 Product: German manufacturer of PV modules, main customer was Ecostream that has agreed to purchase...

  19. Village Hydro Technology Module | Open Energy Information

    Open Energy Info (EERE)

    Hydro Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Village Hydro Technology Module AgencyCompany Organization: World Bank Sector: Energy Focus...

  20. Lateral electrodeposition of compositionally modulated metal layers

    DOE Patents [OSTI]

    Hearne, Sean J

    2014-03-25

    A method for making a laterally modulated metallic structure that is compositionally modulated in the lateral direction with respect to a substrate.

  1. Module Encapsulation Materials, Processing and Testing (Presentation)

    SciTech Connect (OSTI)

    Pern, J.

    2008-12-01

    Study of PV module encapsulation materials, processing, and testing shows that overall module reliability is determined by all component materials and processing factors.

  2. Biomass Energy Technology Module | Open Energy Information

    Open Energy Info (EERE)

    Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Biomass Energy Technology Module AgencyCompany Organization: World Bank Sector: Energy Focus Area:...

  3. Wind Energy Technology Module | Open Energy Information

    Open Energy Info (EERE)

    Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Wind Energy Technology Module AgencyCompany Organization: World Bank Sector: Energy Focus Area:...

  4. Module 6 - Metrics, Performance Measurements and Forecasting...

    Broader source: Energy.gov (indexed) [DOE]

    This module reviews metrics such as cost and schedule variance along with cost and schedule performance indices. In addition, this module will outline forecasting tools such as ...

  5. Module Encapsulation Materials, Processing and Testing (Presentation...

    Office of Scientific and Technical Information (OSTI)

    Module Encapsulation Materials, Processing and Testing (Presentation) Pern, J. 14 SOLAR ENERGY; 36 MATERIALS SCIENCE; ENCAPSULATION; PROCESSING; RELIABILITY; TESTING PV; MODULE...

  6. Photovoltaic Energy Technology Module | Open Energy Information

    Open Energy Info (EERE)

    Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Photovoltaic Energy Technology Module AgencyCompany Organization: World Bank Sector: Energy Focus...

  7. View from the Bridge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View from the Bridge View from the Bridge This presentation gives an overview of Caterpillar's R&D focus on advanced diesel engines and exhaust aftertreatment. deer08_utley.pdf (1.36 MB) More Documents & Publications Efficiency Improvement Pathway Development of Advanced Combustion Technologies for Increased Thermal Efficiency Energy & Sustainablility Partnerships

  8. Photovoltaic Module Qualification Plus Testing

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Kempe, M.; Bosco, N.; Hacke, P.; Jordan, D.; Miller, D. C.; Silverman, T. J.; Phillips, N.; Earnest, T.; Romero, R.

    2013-12-01

    This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

  9. Renewable Fuels Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    This report documents the objectives, analytical approach, and design of the National Energy Modeling System (NEMS) Renewable Fuels Module (RFM) as it relates to the production of the Annual Energy Outlook forecasts.

  10. Residential Demand Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Model Documentation - Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code.

  11. Industrial Demand Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Industrial Demand Module. The report catalogues and describes model assumptions, computational methodology, parameter estimation techniques, and model source code.

  12. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, Melvin L.

    1994-01-01

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

  13. Compact magnetic energy storage module

    DOE Patents [OSTI]

    Prueitt, M.L.

    1994-12-20

    A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

  14. Solar cell module lamination process

    DOE Patents [OSTI]

    Carey, Paul G.; Thompson, Jesse B.; Aceves, Randy C.

    2002-01-01

    A solar cell module lamination process using fluoropolymers to provide protection from adverse environmental conditions and thus enable more extended use of solar cells, particularly in space applications. A laminate of fluoropolymer material provides a hermetically sealed solar cell module structure that is flexible and very durable. The laminate is virtually chemically inert, highly transmissive in the visible spectrum, dimensionally stable at temperatures up to about 200.degree. C. highly abrasion resistant, and exhibits very little ultra-violet degradation.

  15. Wide-range voltage modulation

    SciTech Connect (OSTI)

    Rust, K.R.; Wilson, J.M.

    1992-06-01

    The Superconducting Super Collider`s Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-{mu}s wide pulse with a rise time of less than 1 {mu}s, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented.

  16. The Better Buildings Neighborhood View - October 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View - October 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - October 2012 bb_view_october2012.pdf (136.66 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- Decembe

  17. Laser frequency modulator for modulating a laser cavity

    DOE Patents [OSTI]

    Erbert, Gaylen V.

    1992-01-01

    The present invention relates to a laser frequency modulator for modulating a laser cavity. It is known in the prior art to utilize a PZT (piezoelectric transducer) element in combination with a mirror to change the cavity length of a laser cavity (which changes the laser frequency). Using a PZT element to drive the mirror directly is adequate at frequencies below 10 kHz. However, in high frequency applications (100 kHz and higher) PZT elements alone do not provide a sufficient change in the cavity length. The present invention utilizes an ultrasonic concentrator with a PZT element and mirror to provide modulation of the laser cavity. With an ultrasonic concentrator, the mirror element at the end of a laser cavity can move at larger amplitudes and higher frequencies.

  18. Module and/or Cell Manufacturing

    U.S. Energy Information Administration (EIA) Indexed Site

    Reporting Companies, total number of: 59 Employment, full-time equivalent employees: 10,628 Module and/or Cell Manufacturing 26 Module or System Design 20 Prototype Module Development 15 Prototype Systems Development 8 Wholesale Distribution 30 Retail Distribution 12 Installations 9 Other 5 90-100% 43 50-89% 4 10-49% 6 Less than 10% 6 Crystalline Silicon: Single-Crystal Modules 12 Crystalline Silicon: Cast Modules 8 Thin-Film: Amorphous Silicon Modules 3 Thin-Film: Other Modules 2 Concentrators

  19. Apparatus for encapsulating a photovoltaic module

    DOE Patents [OSTI]

    Albright, Scot P.; Dugan, Larry M.

    1995-10-24

    The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.

  20. NEMS integrating module documentation report

    SciTech Connect (OSTI)

    Not Available

    1993-12-14

    The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

  1. Compact nanomechanical plasmonic phase modulators

    SciTech Connect (OSTI)

    Dennis, B. S.; Haftel, M. I.; Czaplewski, D. A.; Lopez, D.; Blumberg, G.; Aksyuk, V. A.

    2015-03-30

    Highly confined optical energy in plasmonic devices is advancing miniaturization in photonics. However, for mode sizes approaching ≈10 nm, the energy increasingly shifts into the metal, raising losses and hindering active phase modulation. Here, we propose a nanoelectromechanical phase-modulation principle exploiting the extraordinarily strong dependence of the phase velocity of metal–insulator–metal gap plasmons on dynamically variable gap size. We experimentally demonstrate a 23-μm-long non-resonant modulator having a 1.5π rad range, with 1.7 dB excess loss at 780 nm. Analysis shows that by simultaneously decreasing the gap, length and width, an ultracompact-footprint π rad phase modulator can be realized. This is achieved without incurring the extra loss expected for plasmons confined in a decreasing gap, because the increasing phase-modulation strength from a narrowing gap offsets rising propagation losses. Such small, high-density electrically controllable components may find applications in optical switch fabrics and reconfigurable plasmonic optics.

  2. TotalView Parallel Debugger at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The performance of the GUI can be greatly improved if used in conjunction with free NX software. The TotalView documentation web page is a good resource for learning more...

  3. Better Buildings Network View November 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BetterBuildings Network View News From the Field Capturing Efficiency in Residential Real Estate Transactions The U.S. Departmenr of Energy (DOE) has released More Real Estate ...

  4. JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR)

    Broader source: Energy.gov [DOE]

    The purpose of this job aid is to guide supervisor users through the step-by-step process of viewing an employee matrix within SuccessFactors Learning.

  5. A common-view disciplined oscillator

    SciTech Connect (OSTI)

    Lombardi, Michael A.; Dahlen, Aaron P.

    2010-05-15

    This paper describes a common-view disciplined oscillator (CVDO) that locks to a reference time scale through the use of common-view global positioning system (GPS) satellite measurements. The CVDO employs a proportional-integral-derivative controller that obtains near real-time common-view GPS measurements from the internet and provides steering corrections to a local oscillator. A CVDO can be locked to any time scale that makes real-time common-view data available and can serve as a high-accuracy, self-calibrating frequency and time standard. Measurement results are presented where a CVDO is locked to UTC(NIST), the coordinated universal time scale maintained at the National Institute of Standards and Technology in Boulder, Colorado.

  6. Reflective coherent spatial light modulator

    DOE Patents [OSTI]

    Simpson, John T.; Richards, Roger K.; Hutchinson, Donald P.; Simpson, Marcus L.

    2003-04-22

    A reflective coherent spatial light modulator (RCSLM) includes a subwavelength resonant grating structure (SWS), the SWS including at least one subwavelength resonant grating layer (SWL) have a plurality of areas defining a plurality of pixels. Each pixel represents an area capable of individual control of its reflective response. A structure for modulating the resonant reflective response of at least one pixel is provided. The structure for modulating can include at least one electro-optic layer in optical contact with the SWS. The RCSLM is scalable in both pixel size and wavelength. A method for forming a RCSLM includes the steps of selecting a waveguide material and forming a SWS in the waveguide material, the SWS formed from at least one SWL, the SWL having a plurality of areas defining a plurality of pixels.

  7. Solid-state membrane module

    DOE Patents [OSTI]

    Gordon, John Howard; Taylor, Dale M.

    2011-06-07

    Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

  8. Active combustion flow modulation valve

    DOE Patents [OSTI]

    Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

    2013-09-24

    A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

  9. Better Buildings Network View | April 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | April 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View April 2014 (130.28 KB) More Documents & Publications Better Buildings Network View | December 2014 Better Buildings Residential Network Orientation Webinar Better Buildings Network View | May

  10. Better Buildings Network View | December 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | December 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View December 2014 (252.31 KB) More Documents & Publications Better Buildings Network View | February 2014 Better Buildings Network View | November 2014 Lessons Learned: Peer Exchange Calls -- No. 3

  11. Better Buildings Network View | January 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | January 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View January 2015 (161.17 KB) More Documents & Publications Better Buildings Network View | December 2014 Lessons Learned: Peer Exchange Calls -- No. 3 Better Buildings Network View | May

  12. Better Buildings Network View | November 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 2014 Better Buildings Network View | November 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View November 2014 (162.63 KB) More Documents & Publications Better Buildings Network View | July-August 2014 Better Buildings Residential Network Orientation Webinar Better Buildings Network View | December 2014

  13. The Better Buildings Neighborhood View - Summer 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summer 2011 The Better Buildings Neighborhood View - Summer 2011 The quarterly update newsletter of the Better Buildings program of the U.S. Department of Energy. BB Neighborhood View -- Summer 2011 (138.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- May

  14. The Better Buildings Neighborhood View -- March 2012 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program BB Neighborhood View -- March 2012 (292.36 KB) More Documents & Publications The Better Buildings Neighborhood View -- February 2012 The Better Buildings Neighborhood View -- January 2012 Commercial Buildings Integration Program Overview - 2015 BTO Peer Review

  15. Programmable Multi-Chip Module

    DOE Patents [OSTI]

    Kautz, David; Morgenstern, Howard; Blazek, Roy J.

    2005-05-24

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  16. Programmable Multi-Chip Module

    DOE Patents [OSTI]

    Kautz, David; Morgenstern, Howard; Blazek, Roy J.

    2004-11-16

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  17. Programmable multi-chip module

    DOE Patents [OSTI]

    Kautz, David; Morgenstern, Howard; Blazek, Roy J.

    2004-03-02

    A multi-chip module comprising a low-temperature co-fired ceramic substrate having a first side on which are mounted active components and a second side on which are mounted passive components, wherein this segregation of components allows for hermetically sealing the active components with a cover while leaving accessible the passive components, and wherein the passive components are secured using a reflow soldering technique and are removable and replaceable so as to make the multi-chip module substantially programmable with regard to the passive components.

  18. January 2013 Most Viewed Documents for Renewable Energy Sources...

    Office of Scientific and Technical Information (OSTI)

    Highlights of the Technologies Challenges (Presentation) Noufi, R. Accelerated UV Test Methods for Encapsulants of Photovoltaic Modules (Presentation) Kempe, M. D. Module ...

  19. A Comparison of Key PV Backsheet and Module Properties from Fielded Module

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exposures and Accelerated Test Conditions | Department of Energy A Comparison of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions A Comparison of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps5_dupont_gambogi.pdf (781.38 KB) More Documents & Publications Agenda for the PV Module

  20. WRAP module 1 treatment plan

    SciTech Connect (OSTI)

    Mayancsik, B.A.

    1995-05-01

    This document provides the methodology to treat waste in the Waste Receiving and Processing Module 1 facility to meet the Resource Conservation and Recovery Act (RCRA) land disposal restrictions or the Waste Isolation and Pilot Plant waste acceptance criteria. This includes Low-Level Mixed Waste, Transuranic Waste, and Transuranic Mixed Waste.

  1. Commercial Demand Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Documents the objectives, analytical approach and development of the National Energy Modeling System (NEMS) Commercial Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components.

  2. Coal Market Module - NEMS Documentation

    Reports and Publications (EIA)

    2014-01-01

    Documents the objectives and the conceptual and methodological approach used in the development of the National Energy Modeling System's (NEMS) Coal Market Module (CMM) used to develop the Annual Energy Outlook 2014 (AEO2014). This report catalogues and describes the assumptions, methodology, estimation techniques, and source code of CMM's two submodules. These are the Coal Production Submodule (CPS) and the Coal Distribution Submodule (CDS).

  3. The Better Buildings Neighborhood View -- August 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy August 2012 The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- August 2012 (133.92 KB) More Documents & Publications The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View -- July 2012 The Better Buildings Neighborhood View -- June 2012

  4. Modulation compression for short wavelength harmonic generation

    SciTech Connect (OSTI)

    Qiang, J.

    2010-01-11

    Laser modulator is used to seed free electron lasers. In this paper, we propose a scheme to compress the initial laser modulation in the longitudinal phase space by using two opposite sign bunch compressors and two opposite sign energy chirpers. This scheme could potentially reduce the initial modulation wavelength by a factor of C and increase the energy modulation amplitude by a factor of C, where C is the compression factor of the first bunch compressor. Such a compressed energy modulation can be directly used to generate short wavelength current modulation with a large bunching factor.

  5. Dumping Dirty Diesels: The View From the Bridge | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dumping Dirty Diesels: The View From the Bridge Dumping Dirty Diesels: The View From the Bridge 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters ...

  6. Mountain View Power Partners II Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    II Wind Farm Jump to: navigation, search Name Mountain View Power Partners II Wind Farm Facility Mountain View Power Partners II Sector Wind energy Facility Type Commercial Scale...

  7. OpenEI:Neutral point of view | Open Energy Information

    Open Energy Info (EERE)

    point of view Jump to: navigation, search Neutral point of view (NPOV) means that articles and content contributed or edited on the platform must be unbiased. All significant...

  8. The Better Buildings Neighborhood View -- January 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  9. The Better Buildings Neighborhood View -- July 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- July 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  10. The Better Buildings Neighborhood View -- April 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 The Better Buildings Neighborhood View -- April 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  11. The Better Buildings Neighborhood View -- April 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- April 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  12. The Better Buildings Neighborhood View -- August 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    August 2012 The Better Buildings Neighborhood View -- August 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  13. Better Buildings Network View | November 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | November 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF...

  14. The Better Buildings Neighborhood View -- June 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    June 2012 The Better Buildings Neighborhood View -- June 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  15. The Better Buildings Neighborhood View -- July 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- July 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood...

  16. The Better Buildings Neighborhood View -- January 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 The Better Buildings Neighborhood View -- January 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  17. The Better Buildings Neighborhood View -- May 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - May 2012 The Better Buildings Neighborhood View -- May 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings...

  18. The Better Buildings Neighborhood View -- Fall 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall 2011 The Better Buildings Neighborhood View -- Fall 2011 Better Buildings Neighborhood View, from the Better Buildings Neighborhood Program of the U.S. Department of Energy. ...

  19. Better Buildings Network View | January 2016 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | January 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  20. Better Buildings Network View | June 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | June 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  1. Better Buildings Network View | October 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 2014 Better Buildings Network View | October 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential ...

  2. Better Buildings Network View | January 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | January 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  3. Better Buildings Network View | February 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | February 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  4. Better Buildings Network View | July-August 2014 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | July-August 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ...

  5. Better Buildings Network View | February 2016 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | February 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  6. Better Buildings Network View | May 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | May 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  7. Better Buildings Network View | March 2014 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | March 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  8. Better Buildings Network View | April 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | April 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  9. Better Buildings Network View | December 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | December 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  10. Better Buildings Network View | March 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | March 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  11. Better Buildings Network View | January 2014 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Better Buildings Network View | January 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  12. Better Buildings Network View | October 2015 | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | October 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  13. Better Buildings Network View | March 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6 Better Buildings Network View | March 2016 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF ...

  14. Better Buildings Network View | June 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | June 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. PDF icon ...

  15. Better Buildings Network View | July-August 2015 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | July-August 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ...

  16. Better Buildings Network View | April 2014 | Department of Energy

    Office of Environmental Management (EM)

    Residential Network. Better Buildings Network View April 2014 (130.28 KB) More Documents & Publications Better Buildings Network View | December 2014 Better Buildings Residential ...

  17. Better Buildings Network View | May 2015 | Department of Energy

    Office of Environmental Management (EM)

    Residential Network. Better Buildings Network View May 2015 (548.9 KB) More Documents & Publications Better Buildings Network View | June 2015 Home Performance with ENERGY STAR ...

  18. The Better Buildings Neighborhood View -- February 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- January 2012 Microsoft Word - T4VEICTO2 Sub3Residential Retrofit Program Design ...

  19. Mountain View Power Partners III Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    III Wind Farm Jump to: navigation, search Name Mountain View Power Partners III Wind Farm Facility Mountain View Power Partners III Sector Wind energy Facility Type Commercial...

  20. City of Mountain View, Missouri (Utility Company) | Open Energy...

    Open Energy Info (EERE)

    View Place: Missouri Phone Number: (417) 934-2601 Website: mountainviewmo.comindex.phpg Facebook: https:www.facebook.comCityOfMountainViewMissouri Outage Hotline: (877)...

  1. The Better Buildings Neighborhood View -- March 2012 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    March 2012 The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings ...

  2. Interface module for transverse energy input to dye laser modules

    DOE Patents [OSTI]

    English, R.E. Jr.; Johnson, S.A.

    1994-10-11

    An interface module for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams in the form of illumination bar to the lasing zone of a dye laser device, in particular to a dye laser amplifier. The preferred interface module includes an optical fiber array having a plurality of optical fibers arrayed in a co-planar fashion with their distal ends receiving coherent laser energy from an enhancing laser source, and their proximal ends delivered into a relay structure. The proximal ends of the optical fibers are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array delivered from the optical fiber array is acted upon by an optical element array to produce an illumination bar which has a cross section in the form of a elongated rectangle at the position of the lasing window. The illumination bar is selected to have substantially uniform intensity throughout. 5 figs.

  3. Interface module for transverse energy input to dye laser modules

    DOE Patents [OSTI]

    English, Jr., Ronald E.; Johnson, Steve A.

    1994-01-01

    An interface module (10) for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams (36) in the form of illumination bar (54) to the lasing zone (18) of a dye laser device, in particular to a dye laser amplifier (12). The preferred interface module (10) includes an optical fiber array (30) having a plurality of optical fibers (38) arrayed in a co-planar fashion with their distal ends (44) receiving coherent laser energy from an enhancing laser source (46), and their proximal ends (4) delivered into a relay structure (3). The proximal ends (42) of the optical fibers (38) are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array (36) delivered from the optical fiber array (30) is acted upon by an optical element array (34) to produce an illumination bar (54) which has a cross section in the form of a elongated rectangle at the position of the lasing window (18). The illumination bar (54) is selected to have substantially uniform intensity throughout.

  4. PV module mounting method and mounting assembly

    DOE Patents [OSTI]

    Lenox, Carl J.S.; Johnson, Kurt M.

    2013-04-23

    A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

  5. Extension Modules for the Python Interpretive language

    Energy Science and Technology Software Center (OSTI)

    2006-12-29

    Python is an interpreted computer language, freely available to all, which may be extended by user developed "modules". These modules ay be written in a complied language such as 'C', and then linked into the Python program

  6. Mounting support for a photovoltaic module

    DOE Patents [OSTI]

    Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

    2013-03-26

    A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

  7. Reliability Issues for Photovoltaic Modules (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2009-10-01

    Si modules good in field; new designs need reliability testing. CdTe & CIGS modules sensitive to moisture; carefully seal. CPV in product development stage; benefits from expertise in other industries.

  8. Our view: Vaccinate now, prevent flu later

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Our view: Vaccinate now, prevent flu later Our view: Vaccinate now, prevent flu later Los Alamos National Laboratory scientists are predicting that this winter's flu season is most likely to peak in February across much of the United States. The scientists can say this because of the model they have constructed. December 24, 2015 Man sneezing Model suggests still time to get your flu shot and be protected. "There's no crystal ball when it comes to predicting disease outbreaks," said

  9. Tunable Surface Plasmon Infrared Modulator - Energy Innovation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Industries Infrared Modulator IR Counter Measures Photonic Circuitry Metamaterials Chemical Sensing Variable Attenuation Patents and Patent Applications ID Number...

  10. Module: Estimating Historical Emissions from Deforestation |...

    Open Energy Info (EERE)

    Website: www.leafasia.orgtoolstechnical-guidance-series-estimating-historical Cost: Free Language: English Module: Estimating Historical Emissions from Deforestation Screenshot...

  11. Module 6- Metrics, Performance Measurements and Forecasting

    Broader source: Energy.gov [DOE]

    This module reviews metrics such as cost and schedule variance along with cost and schedule performance indices.

  12. Seeding Coherent Radiation Sources with Sawtooth Modulation ...

    Office of Scientific and Technical Information (OSTI)

    HARMONICS; INSTABILITY; MODULATION; PERFORMANCE; PHASE SPACE; POLARIZATION; RADIATION SOURCES; SATURATION; SEEDS; WAVE FORMS; WAVELENGTHS Accelerators,ACCPHY, SYNCHRAD, XFEL

  13. Partial Shading in Monolithic Thin Film PV Modules: Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partial Shading in Monolithic Thin Film PV Modules: Analysis and Design Partial Shading in Monolithic Thin Film PV Modules: Analysis and Design Presented at the PV Module ...

  14. Project Execution Plan Review Module (RM) | Department of Energy

    Office of Environmental Management (EM)

    Review Module (RM) Project Execution Plan Review Module (RM) The Project Execution Plan (PEP) Review Module (RM) is a tool that assists DOE federal project review teams in...

  15. Overview of the PV Module Model in PVWatts (Presentation)

    SciTech Connect (OSTI)

    Marion, B.

    2010-09-22

    Overview of the PV module model. PVWatts module power estimates were compared with those using the Sandia model for three modules and data sets.

  16. A Stability of LCLS Linac Modulators

    SciTech Connect (OSTI)

    Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

    2012-06-13

    Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

  17. Emittance growth from electron beam modulation

    SciTech Connect (OSTI)

    Blaskiewicz, M.

    2009-12-01

    In linac ring colliders like MeRHIC and eRHIC a modulation of the electron bunch can lead to a modulation of the beam beam tune shift and steering errors. These modulations can lead to emittance growth. This note presents simple formulas to estimate these effects which generalize some previous results.

  18. Pulse amplitude modulated chlorophyll fluorometer

    DOE Patents [OSTI]

    Greenbaum, Elias; Wu, Jie

    2015-12-29

    Chlorophyll fluorometry may be used for detecting toxins in a sample because of changes in micro algae. A portable lab on a chip ("LOAC") based chlorophyll fluorometer may be used for toxin detection and environmental monitoring. In particular, the system may include a microfluidic pulse amplitude modulated ("PAM") chlorophyll fluorometer. The LOAC PAM chlorophyll fluorometer may analyze microalgae and cyanobacteria that grow naturally in source drinking water.

  19. Solid-state membrane module

    SciTech Connect (OSTI)

    Hinklin, Thomas Ray; Lewinsohn, Charles Arthur

    2015-06-30

    A module for separating oxygen from an oxygen-containing gaseous mixture comprising planar solid-state membrane units, each membrane unit comprising planar dense mixed conducting oxides layers, planar channel-free porous support layers, and one or more planar intermediate support layers comprising at least one channeled porous support layer. The porosity of the planar channeled porous support layers is less than the porosity of the planar channel-free porous support layers.

  20. Gas separation membrane module assembly

    DOE Patents [OSTI]

    Wynn, Nicholas P; Fulton, Donald A.

    2009-03-31

    A gas-separation membrane module assembly and a gas-separation process using the assembly. The assembly includes a set of tubes, each containing gas-separation membranes, arranged within a housing. The housing contains a tube sheet that divides the space within the housing into two gas-tight spaces. A permeate collection system within the housing gathers permeate gas from the tubes for discharge from the housing.

  1. Development of GREET Catalyst Module

    SciTech Connect (OSTI)

    Wang, Zhichao; Benavides, Pahola T.; Dunn, Jennifer B.; Cronauer, Donald C.

    2015-09-01

    In this report, we develop energy and material flows for the production of five different catalysts (tar reforming, alcohol synthesis, Zeolite Socony Mobil-5 [ZSM-5], Mo/Co/ γ-Al2O3, and Pt/ γ-Al2O3) and two chemicals (olivine, dimethyl ether of polyethylene glycol [DEPG]). These compounds and catalysts are now included in the Greenhouse Gases, Regulated Emissions and Energy Use in Transportation (GREET™) catalyst module.

  2. ANALOG I/O MODULE TEST SYSTEM BASED ON EPICS CA PROTOCOL AND ACTIVEX CA INTERFACE

    SciTech Connect (OSTI)

    YENG,YHOFF,L.

    2003-10-13

    Analog input (ADC) and output (DAC) modules play a substantial role in device level control of accelerator and large experiment physics control system. In order to get the best performance some features of analog modules including linearity, accuracy, crosstalk, thermal drift and so on have to be evaluated during the preliminary design phase. Gain and offset error calibration and thermal drift compensation (if needed) may have to be done in the implementation phase as well. A natural technique for performing these tasks is to interface the analog VO modules and GPIB interface programmable test instruments with a computer, which can complete measurements or calibration automatically. A difficulty is that drivers of analog modules and test instruments usually work on totally different platforms (vxworks VS Windows). Developing new test routines and drivers for testing instruments under VxWorks (or any other RTOS) platform is not a good solution because such systems have relatively poor user interface and developing such software requires substantial effort. EPICS CA protocol and ActiveX CA interface provide another choice, a PC and LabVIEW based test system. Analog 110 module can be interfaced from LabVIEW test routines via ActiveX CA interface. Test instruments can be controlled via LabVIEW drivers, most of which are provided by instrument vendors or by National Instruments. Labview also provides extensive data analysis and process functions. Using these functions, users can generate powerful test routines very easily. Several applications built for Spallation Neutron Source (SNS) Beam Loss Monitor (BLM) system are described in this paper.

  3. Quality Assurance for Critical Decision Reviews RM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quality Assurance for Critical Decision Reviews Module March 2010 CD-0 O 0 OFFICE OF Q C CD-1 F ENVIRO Standard R Quality A Rev Critical Decis CD-2 M ONMENTAL Review Plan Assuranc view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) e (QA) e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the

  4. Linked-View Parallel Coordinate Plot Renderer

    Energy Science and Technology Software Center (OSTI)

    2011-06-28

    This software allows multiple linked views for interactive querying via map-based data selection, bar chart analytic overlays, and high dynamic range (HDR) line renderings. The major component of the visualization package is a parallel coordinate renderer with binning, curved layouts, shader-based rendering, and other techniques to allow interactive visualization of multidimensional data.

  5. Better Buildings Network View | December 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | December 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View December 2015 (191.86 KB) More Documents & Publications BBRN Factsheet: Case Study: Community Engagement Better Buildings Network View | July-August 2015 Better Buildings Residential Network Orientation Webinar

  6. The Better Buildings Neighborhood View - September 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy September 2012 The Better Buildings Neighborhood View - September 2012 Monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- September 2012 (140.07 KB) More Documents & Publications The Better Buildings Neighborhood View -- Fall 2011 The Better Buildings Neighborhood View -- July 2013

  7. The Better Buildings Neighborhood View -- February 2012 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy February 2012 The Better Buildings Neighborhood View -- February 2012 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- February 2012 (250.14 KB) More Documents & Publications The Better Buildings Neighborhood View -- March 2012 The Better Buildings Neighborhood View -- January 2012 Microsoft Word - T4_VEIC_TO2_ Sub3_Residential Retrofit Program Design Guide Play Book_TEAM 4

  8. The Better Buildings Neighborhood View -- January 2013 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 3 The Better Buildings Neighborhood View -- January 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program -- January 2013. BB Neighborhood View -- January 2013 (181 KB) More Documents & Publications The Better Buildings Neighborhood View - September 2012 The Better Buildings Neighborhood View - October 2012 It's Academic: BetterBuildings for Michigan Partners With University to Reach Employees

  9. Argonne's SpEC Module | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SpEC Module Share Topic Energy Energy efficiency Vehicles

  10. Design specifications for manufacturability of MCM-C multichip modules

    SciTech Connect (OSTI)

    Blazek, R.; Desch, J.; Kautz, D.; Morgenstern, H.

    1996-10-01

    A comprehensive guide for ceramic-based multichip modules (MCMS) has been developed by AlliedSignal Federal Manufacturing & Technologies (FM&T) to provide manufacturability information for its customers about how MCM designs can be affected by existing process and equipment capabilities. This guide extends beyond a listing of design rules by providing information about design layout, low- temperature cofired ceramic (LTCC) substrate fabrication, MCM assembly and electrical testing Electrical mechanical packaging, environmental, and producibility issues are reviewed. Examples of three MCM designs are shown in the form of packaging cross-sectional views, LTCC substrate layer allocations, and overall MCM photographs. The guide has proven to be an effective tool for enhancing communications between MCM designers and manufacturers and producing a microcircuit that meets design requirements within the limitations of process capabilities.

  11. Better Buildings Network View, April 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View, April 2016 News From the Field Leverage Earth Day to Promote Energy Efficiency Learn how to leverage Earth Day and other holidays by visiting the Better Buildings Residential Program Solution Center for helpful peer exchange call summaries and case studies: Read the Peer Exchange Call summary "Leveraging Seasonal Opportunities for Marketing Energy Efficiency" featuring Better Buildings Residential Network member green spaces (Chattanooga, TN). Review the "Leveraging Holidays

  12. Better Buildings Network View, June 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Network View News From the Field June 2015 First-Ever Network Member Gathering Held at 2015 Better Buildings Summit More than 800 participants met at the 2015 Better Buildings Summit in Washington, D.C., to engage in dialogue focused on sharing proven approaches for greater energy efficiency in buildings. This year was the first to incorporate the residential sector with targeted sessions for energy efficiency program administrators and partners. Speakers included leaders from

  13. Better Buildings Network View, June 2016

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Buildings Network View, June 2016 News From the Field Learn From the Top Peer Exchange Call Takeaways The sixth Lessons Learned: Peer Exchange Calls "greatest hits" fact sheet summarizes top takeaways about customer service and other tips shared by Better Buildings Residential Network members during Peer Exchange Calls held in fall 2015. Here are two takeaways: Leverage HVAC upgrades to spark conversations about whole- home performance. Customers, who have put their trust in a

  14. Better Buildings Network View, March 2015

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Network View | March 2015 News From the Field March 2015 Motivate Energy Upgrades With New Network Incentives Toolkit The Better Buildings Residential Network has Voluntary Initiatives Get developed a Designing Social-Take Part Incentives Toolkit to help energy efficiency organizations design incentives that motivate potential customers to act by lowering the risk, decreasing the cost, or offering additional benefits with home energy upgrades. Many residential energy efficiency

  15. Highly Sensitive Electro-Optic Modulators

    SciTech Connect (OSTI)

    DeVore, Peter S

    2015-10-26

    There are very important diagnostic and communication applications that receive faint electrical signals to be transmitted over long distances for capture. Optical links reduce bandwidth and distance restrictions of metal transmission lines; however, such signals are only weakly imprinted onto the optical carrier, resulting in low fidelity transmission. Increasing signal fidelity often necessitates insertion of radio-frequency (RF) amplifiers before the electro-optic modulator, but (especially at high frequencies) RF amplification results in large irreversible distortions. We have investigated the feasibility of a Sensitive and Linear Modulation by Optical Nonlinearity (SALMON) modulator to supersede RF-amplified modulators. SALMON uses cross-phase modulation, a manifestation of the Kerr effect, to enhance the modulation depth of an RF-modulated optical wave. This ultrafast process has the potential to result in less irreversible distortions as compared to a RF-amplified modulator due to the broadband nature of the Kerr effect. Here, we prove that a SALMON modulator is a feasible alternative to an RFamplified modulator, by demonstrating a sensitivity enhancement factor greater than 20 and significantly reduced distortion.

  16. In-Line Thermoelectric Module

    SciTech Connect (OSTI)

    Pento, Robert; Marks, James E.; Staffanson, Clifford D.

    1998-07-28

    A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an-in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions maybe perpendicular to the direction-of current flow through the module.

  17. Smart Fan Modules And System

    DOE Patents [OSTI]

    Cipolla, Thomas M.; Kaufman, Richard I.; Mok, Lawrence S.

    2003-07-15

    A fan module including: two or more individual fans, each fan having an air movement means and a motor engaged with the air movement means for accelerating air entering each of the two or more individual fans; a temperature sensor for sensing a temperature associated with the two or more fans and for outputting a first signal corresponding to the temperature; rotational speed sensor for outputting a second signal corresponding to a rotational speed of each of the two or more fans; and a processor for receiving the first and second signals and controlling the two or more individual fans based on the first and second signals. A fan module including: two or more individual fans, each fan having an air movement means and a motor engaged with the air movement means for accelerating air entering each of the two or more individual fans; a temperature sensor for sensing a temperature associated with the two or more fans and for outputting a first signal corresponding to the temperature; rotational speed sensor for outputting a second signal corresponding to a rotational speed of each of the two or more fans; and a processor for receiving the first and second signals and controlling the two or more individual fans based on the first and second signals.

  18. In-line thermoelectric module

    DOE Patents [OSTI]

    Pento, Robert; Marks, James E.; Staffanson, Clifford D.

    2000-01-01

    A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

  19. Binary module test. Final report

    SciTech Connect (OSTI)

    Schilling, J.R.; Colley, T.C.; Pundyk, J.

    1980-12-01

    The objective of this project was to design and test a binary loop module representative of and scaleable to commercial size units. The design was based on state-of-the-art heat exchanger technology, and the purpose of the tests was to confirm performance of a supercritical boiling cycle using isobutane and a mixture of isobutane and isopentane as the secondary working fluid. The module was designed as one percent of a 50 MW unit. It was installed at Magma Power's East Mesa geothermal field and tested over a period of approximately 4 months. Most of the test runs were with isobutane but some data were collected for hydrocarbon mixtures. The results of the field tests are reported. In general these results indicate reasonably good heat balances and agreement with overall heat transfer coefficients calculated by current stream analysis methods and available fluid property data; however, measured pressure drops across the heat exchangers were 20 percent higher than estimated. System operation was stable under all conditions tested.

  20. Power module assemblies with staggered coolant channels

    DOE Patents [OSTI]

    Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

    2013-07-16

    A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

  1. An ultrafast carbon nanotube terahertz polarisation modulator

    SciTech Connect (OSTI)

    Docherty, Callum J.; Stranks, Samuel D.; Habisreutinger, Severin N.; Joyce, Hannah J.; Herz, Laura M.; Nicholas, Robin J.; Johnston, Michael B.

    2014-05-28

    We demonstrate ultrafast modulation of terahertz radiation by unaligned optically pumped single-walled carbon nanotubes. Photoexcitation by an ultrafast optical pump pulse induces transient terahertz absorption in nanowires aligned parallel to the optical pump. By controlling the polarisation of the optical pump, we show that terahertz polarisation and modulation can be tuned, allowing sub-picosecond modulation of terahertz radiation. Such speeds suggest potential for semiconductor nanowire devices in terahertz communication technologies.

  2. Alternative Energy Sources - An Interdisciplinary Module for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    An Interdisciplinary Module for Energy Education Alternative Energy Sources - An ... Energy Basics, Wind Energy, Solar Summary Find activities focused on renewable energy ...

  3. Integrated Performance Testing Workshop, Modules 6 - 11

    SciTech Connect (OSTI)

    Leach, Janice; Torres, Teresa M.

    2012-10-01

    These modules cover performance testing of: Interior Detection Systems; Access Controls; Exterior Detection Systems; Video Assessment Systems; SNM / Contraband Detection Systems; Access Delay Elements

  4. Advanced Low Temperature Absorption Chiller Module Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - ...

  5. NREL: Measurements and Characterization - Outdoor Module Current...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of prototype concentrator modules and cells mounted in a 2-axis tracker; translation equations, stability and performance of concentrator Up to 10 samples at a time;...

  6. Electrochemically-Modulated Separation and Mass Spectrometric...

    Office of Scientific and Technical Information (OSTI)

    Electrochemically-modulated separations (EMS) are a straightforward means of isolating and pre-concentrating elements for on-line mass spectrometric analysis. Elements are ...

  7. Photovoltaic module energy rating methodology development

    SciTech Connect (OSTI)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L.; Whitaker, C.; Newmiller, J.

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  8. Optical sensing based on wavelength modulation spectroscopy

    DOE Patents [OSTI]

    Buckley, Steven G.; Gharavi, Mohammadreza; Borchers; Marco

    2011-06-28

    Techniques, apparatus and systems for using Wavelength Modulation Spectroscopy measurements to optically monitor gas media such as gases in gas combustion chambers.

  9. PROJECT PROFILE: Support of International Photovoltaic Module...

    Broader source: Energy.gov (indexed) [DOE]

    This project supports the National Renewable Energy Laboratory's involvement in the Photovoltaic (PV) Module Quality Assurance Task Force (PVQAT) to develop the international test ...

  10. Module Encapsulation Materials, Processing and Testing (Presentation...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: 14 SOLAR ENERGY; 36 MATERIALS SCIENCE; ENCAPSULATION; PROCESSING; RELIABILITY; TESTING PV; MODULE ENCAPSULATION; ...

  11. PV Cell and Module Calibrations at NREL

    SciTech Connect (OSTI)

    Emery, Keith

    2012-10-22

    NREL has equipment to measure any conceivable cell or module technology. The lack of standards for low concentration modules complicates matters. Spectrally adjustable simulators are critical for more than three junctions. NREL's 10-channel fiber optic simulator has shown that the light can be set for each junction within 1% of what it would be under the reference spectrum for up to a five-junction cell. Uncertainty in module simulators dominated by spatial nonuniformity for calibration labs. Manufacturers can mitigate this error by using matched reference modules instead of cells.

  12. Solid State Marx Modulators for Emerging Applications

    SciTech Connect (OSTI)

    Kemp, M.A.; /SLAC

    2012-09-14

    Emerging linear accelerator applications increasingly push the boundaries of RF system performance and economics. The power modulator is an integral part of RF systems whose characteristics play a key role in the determining parameters such as efficiency, footprint, cost, stability, and availability. Particularly within the past decade, solid-state switch based modulators have become the standard in high-performance, high power modulators. One topology, the Marx modulator, has characteristics which make it particularly attractive for several emerging applications. This paper is an overview of the Marx topology, some recent developments, and a case study of how this architecture can be applied to a few proposed linear accelerators.

  13. Module 5- EVMS Concepts and Methods

    Broader source: Energy.gov [DOE]

    This module outlines the criteria needed for implementing Earned Value management, the basic Earned Value terminology, and the different methods used to calculate Earned Value.

  14. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion ...

  15. BloombergBusiness: Viewed from space: less corn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Viewed from space: less corn Viewed from space: less corn U.S. corn production is 2.8 percent smaller than government estimates, according to a daily analysis of infrared satellite ...

  16. Mountain View Power Partners I Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    I Wind Farm Jump to: navigation, search Name Mountain View Power Partners I Wind Farm Facility Mountain View Power Partners I Sector Wind energy Facility Type Commercial Scale Wind...

  17. New Window Technology Saves Energy and the View | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Window Technology Saves Energy and the View New Window Technology Saves Energy and the View November 5, 2013 - 3:55pm Addthis Researchers at the Energy Department's National...

  18. Better Buildings Network View | July-August 2014

    Broader source: Energy.gov [DOE]

    The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

  19. The Better Buildings Neighborhood View -- December 2013 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy December 2013 The Better Buildings Neighborhood View -- December 2013 The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program. BB Neighborhood View -- December 2013 (214.78 KB) More Documents & Publications The Better Buildings Neighborhood View -- July 2013 Focus Series: Philadelphia Energyworks: In the City of Brotherly Love, Sharing Know-How Leads to Sustainability The Better Buildings Neighborhood

  20. Multidimensional display controller for displaying to a user an aspect of a multidimensional space visible from a base viewing location along a desired viewing orientation

    DOE Patents [OSTI]

    Davidson, George S.; Anderson, Thomas G.

    2001-01-01

    A display controller allows a user to control a base viewing location, a base viewing orientation, and a relative viewing orientation. The base viewing orientation and relative viewing orientation are combined to determine a desired viewing orientation. An aspect of a multidimensional space visible from the base viewing location along the desired viewing orientation is displayed to the user. The user can change the base viewing location, base viewing orientation, and relative viewing orientation by changing the location or other properties of input objects.

  1. A Wide Field of View Plasma Spectrometer

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Skoug, Ruth M.; Funsten, Herbert O.; Moebius, Eberhard; Harper, Ron W.; Kihara, Keith H.; Bower, Jonathan S.

    2016-07-23

    Here we present a fundamentally new type of space plasma spectrometer, the wide field of view plasma spectrometer, whose field of view is >1.25π ster using fewer resources than traditional methods. The enabling component is analogous to a pinhole camera with an electrostatic energy-angle filter at the image plane. Particle energy-per-charge is selected with a tunable bias voltage applied to the filter plate relative to the pinhole aperture plate. For a given bias voltage, charged particles from different directions are focused by different angles to different locations. Particles with appropriate locations and angles can transit the filter plate and aremore » measured using a microchannel plate detector with a position-sensitive anode. Full energy and angle coverage are obtained using a single high-voltage power supply, resulting in considerable resource savings and allowing measurements at fast timescales. Lastly, we present laboratory prototype measurements and simulations demonstrating the instrument concept and discuss optimizations of the instrument design for application to space measurements.« less

  2. Testing Protocol for Module Encapsulant Creep (Presentation)

    SciTech Connect (OSTI)

    Kempe, M. D.; Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.; Moseley, J. M.; Shah, Q.; Tamizhmani, G.; Sakurai, K.; Inoue, M.; Doi, T.; Masuda, A.

    2012-02-01

    Recently there has been an interest in the use of thermoplastic encapsulant materials in photovoltaic modules to replace chemically crosslinked materials, e.g., ethylene-vinyl acetate. The related motivations include the desire to: reduce lamination time or temperature; use less moisture-permeable materials; or use materials with better corrosion characteristics. However, the use of any thermoplastic material in a high-temperature environment raises safety and performance concerns, as the standardized tests currently do not expose the modules to temperatures in excess of 85C, yet modules may experience temperatures above 100C in operation. Here we constructed eight pairs of crystalline-silicon modules and eight pairs of glass/encapsulation/glass mock modules using different encapsulation materials of which only two were designed to chemically crosslink. One module set was exposed outdoors with insulation on the back side in Arizona in the summer, and an identical set was exposed in environmental chambers. High precision creep measurements and performance measurements indicate that despite many of these polymeric materials being in the melt state at some of the highest outdoor temperatures achievable, very little creep was seen because of their high viscosity, temperature heterogeneity across the modules, and in the case of the crystalline-silicon modules, the physical restraint of the backsheet. These findings have very important implications for the development of IEC and UL qualification and safety standards, and in regards to the necessary level of cure during the processing of crosslinking encapsulants.

  3. Development Status of The ILC Marx Modulator

    SciTech Connect (OSTI)

    Nguyen, M; Beukers, T.; Burkhart, C.; Larsen, R.; Olsen, J.; Tang, T.; ,

    2010-06-07

    The ILC Marx Modulator is under development as a lower cost alternative to the 'Baseline Conceptual Design' (BCD) klystron modulator. Construction of a prototype Marx is complete and testing is underway at SLAC. The Marx employs solid state elements, IGBTs and diodes, to control the charge, discharge and isolation of the modules. The prototype is based on a stack of sixteen modules, each initially charged to {approx}11 kV, which are arranged in a Marx topology. Initially, eleven modules combine to produce the 120 kV output pulse. The remaining modules are switched in after appropriate delays to compensate for the voltage droop that results from the discharge of the energy storage capacitors. Additional elements will further regulate the output voltage to {+-}0.5%. The Marx presents several advantages over the conventional klystron modulator designs. It is physically smaller; there is no pulse transformer (quite massive at these parameters) and the energy storage capacitor bank is quite small, owing to the active droop compensation. It is oil-free; voltage hold-off is achieved using air insulation. It is air cooled; the secondary air-water heat exchanger is physically isolated from the electronic components. This paper outlines the current developmental status of the prototype Marx. It presents a detailed electrical and mechanical description of the modulator and operational test results. It will discuss electrical efficiency measurements, fault testing, and output voltage regulation.

  4. Identification coding schemes for modulated reflectance systems

    DOE Patents [OSTI]

    Coates, Don M.; Briles, Scott D.; Neagley, Daniel L.; Platts, David; Clark, David D.

    2006-08-22

    An identifying coding apparatus employing modulated reflectance technology involving a base station emitting a RF signal, with a tag, located remotely from the base station, and containing at least one antenna and predetermined other passive circuit components, receiving the RF signal and reflecting back to the base station a modulated signal indicative of characteristics related to the tag.

  5. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward; Carolan, Michael Francis; Chen, Christopher M.; Armstrong, Phillip Andrew; Wahle, Harold W.; Ohrn, Theodore R.; Kneidel, Kurt E.; Rackers, Keith Gerard; Blake, James Erik; Nataraj, Shankar; van Doorn, Rene Hendrik Elias; Wilson, Merrill Anderson

    2007-02-20

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  6. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward; Carolan, Michael Francis; Chen, Christopher M.; Armstrong, Phillip Andrew; Wahle, Harold W.; Ohrn, Theodore R.; Kneidel, Kurt E.; Rackers, Keith Gerard; Blake, James Erik; Nataraj, Shankar; van Doorn, Rene Hendrik Elias; Wilson, Merrill Anderson

    2008-02-26

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  7. Ion transport membrane module and vessel system

    DOE Patents [OSTI]

    Stein, VanEric Edward; Carolan, Michael Francis; Chen, Christopher M.; Armstrong, Phillip Andrew; Wahle, Harold W.; Ohrn, Theodore R.; Kneidel, Kurt E.; Rackers, Keith Gerard; Blake, James Erik; Nataraj, Shankar; Van Doorn, Rene Hendrik Elias; Wilson, Merrill Anderson

    2012-02-14

    An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

  8. Comparison of Module Performance Characterization Methods

    SciTech Connect (OSTI)

    KROPOSKI,B.; MARION,W.; KING,DAVID L.; BOYSON,WILLIAM EARL; KRATOCHVIL,JAY A.

    2000-10-03

    The rating and modeling of photovoltaic PW module performance has been of concern to manufacturers and system designers for over 20 years. Both the National Renewable Energy Laboratory (NREL) and Sandia National Laboratories (SNL) have developed methodologies to predict module and array performance under actual operating conditions. This paper compares the two methods of determining the performance of PV modules, The methods translate module performance to actual or reference conditions using slightly different approaches. The accuracy of both methods is compared for both hourly, daily, and annual energy production over a year of data recorded at NREL in Golden, CO. The comparison of the two methods will be presented for five different PV module technologies.

  9. Module 7 - Integrated Baseline Review and Change Control | Department of

    Office of Environmental Management (EM)

    Energy 7 - Integrated Baseline Review and Change Control Module 7 - Integrated Baseline Review and Change Control This module focuses on integrated baseline reviews (IBR) and change control. This module outlines the objective and responsibility of an integrated baseline review. Additionally, this module will discuss the change control process required for implementing earned value. Begin Module >> (418.59

  10. Exaggerated supine oblique view of the cervical spine

    SciTech Connect (OSTI)

    Abel, M.S.

    1982-06-01

    The technique of the 60 degree supine oblique view is described together with anatomic skeletal studies of this projection. The view is convenient for emergency room radiography and useful in other clinical radiography. The view separates widely the anterior and posterior portions of the vertebrae in a side to side projection. This makes for an elongated but detailed view of the articular processes, pedicles, and intervertebral foramina. In the cadavar specimen and clinically the view is shown to be useful in delineating fracture deformities of the articular process and visualizing constriction of the intervertebral foramen superiorly. Encroachment of the foramen superiorly is likely to compromise the emerging nerve root in this area.

  11. PSCAD Modules Representing PV Generator

    SciTech Connect (OSTI)

    Muljadi, E.; Singh, M.; Gevorgian, V.

    2013-08-01

    Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

  12. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, C.J.

    1992-12-01

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

  13. Planar photovoltaic solar concentrator module

    DOE Patents [OSTI]

    Chiang, Clement J.

    1992-01-01

    A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

  14. Target Fabrication: A View from the Users

    SciTech Connect (OSTI)

    Kyrala, George A.; Balkey, Matthew M.; Barnes, Cris W.; Batha, Steven H.; Christensen, Cindy R.; Cobble, James A.; Fincke, James; Keiter, Paul; Lanier, Nicholas; Paisley, Dennis; Sorem, Michael; Swift, Damian; Workman, Jonathan

    2004-03-15

    Targets are used for a variety of purposes, but ultimately we use them to validate codes that help us predict and understand new phenomena or effects. The sophistication and complexity of High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) targets has increased in to match the advances made in modeling complex phenomena. The targets have changed from simple hohlraums, spherical geometries, and planar foils, to 3-dimensional geometries that require precision in construction, alignment, and metrology. Furthermore, material properties, such as surface morphologies and volume texture, have significant impact on the behavior of the targets and must be measured and controlled. In the following we will discuss how experimental physicists view targets and the influence that target construction has on interpreting the experimental results. We review a representative sampling of targets fabricated at the Los Alamos National Laboratory that are used in different experiments in support of ICF and HEDP.

  15. TARGET FABRICATION: A VIEW FROM THE USERS.

    SciTech Connect (OSTI)

    Kyrala, George A.; Balkey, Matthew M.; Batha, Steven H.; Barnes, Cris W.; Christensen, Cindy; Cobble, James; Fincke, James; Keiter, Paul; Lanier, Nicholas; Paisley, Dennis; Sorem, Michael S.; Swift, Damian; Workman, Jonathan

    2003-07-18

    Targets are used for a variety of purposes, but ultimately we use them to validate codes that help us predict and understand new phenomena or effects. The sophistication and complexity of High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) targets has increased in time to match the advances made in modeling complex phenomena. The targets have changed from simple hohlraums, spherical geometries, and planar foils, to 3-dimensional geometries that require precision in construction, alignment, and metrology. Furthermore, material properties, such as surface morphologies and volume texture, have significant impact on the behavior of the targets and must be measured and controlled. In the following we will discuss how experimental physicists view targets and the influence that target construction has on interpreting the experimental results. We review a representative sampling of targets fabricated at the Los Alamos National Laboratory that are used in different experiments in support of ICF and HEDP.

  16. Interactive computer-enhanced remote viewing system

    SciTech Connect (OSTI)

    Tourtellott, J.A.; Wagner, J.F.

    1995-10-01

    Remediation activities such as decontamination and decommissioning (D&D) typically involve materials and activities hazardous to humans. Robots are an attractive way to conduct such remediation, but for efficiency they need a good three-dimensional (3-D) computer model of the task space where they are to function. This model can be created from engineering plans and architectural drawings and from empirical data gathered by various sensors at the site. The model is used to plan robotic tasks and verify that selected paths are clear of obstacles. This report describes the development of an Interactive Computer-Enhanced Remote Viewing System (ICERVS), a software system to provide a reliable geometric description of a robotic task space, and enable robotic remediation to be conducted more effectively and more economically.

  17. Flat-Plate Photovoltaic Module Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Module Basics Flat-Plate Photovoltaic Module Basics August 20, 2013 - 4:25pm Addthis ... a high transmission in the wavelengths that can be used by the solar cells in the module. ...

  18. DOE Tour of Zero Floorplans: Marine Drive by Clifton View Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Marine Drive by Clifton View Homes DOE Tour of Zero Floorplans: Marine Drive by Clifton View Homes DOE Tour of Zero Floorplans: Marine Drive by Clifton View...

  19. DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Port Hadlock by Clifton View Homes DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes DOE Tour of Zero Floorplans: Port Hadlock by Clifton View Homes...

  20. Skew chicane based betatron eigenmode exchange module

    DOE Patents [OSTI]

    Douglas, David

    2010-12-28

    A skewed chicane eigenmode exchange module (SCEEM) that combines in a single beamline segment the separate functionalities of a skew quad eigenmode exchange module and a magnetic chicane. This module allows the exchange of independent betatron eigenmodes, alters electron beam orbit geometry, and provides longitudinal parameter control with dispersion management in a single beamline segment with stable betatron behavior. It thus reduces the spatial requirements for multiple beam dynamic functions, reduces required component counts and thus reduces costs, and allows the use of more compact accelerator configurations than prior art design methods.

  1. Microscale autonomous sensor and communications module

    DOE Patents [OSTI]

    Okandan, Murat; Nielson, Gregory N

    2014-03-25

    Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

  2. Ensuring Quality of PV Modules: Preprint

    SciTech Connect (OSTI)

    Kurtz, S.; Wohlgemuth, J.; Hacke, P.; Kempe, M.; Sample, T.; Yamamichi, M.; Kondo, M.; Doi, T.; Otani, K.; Amano, J.

    2011-07-01

    Photovoltaic (PV) customers need to have confidence in the PV modules they purchase. Currently, no test can quantify a module's lifetime with confidence, but stress tests are routinely used to differentiate PV product designs. We suggest that the industry would be strengthened by using the wisdom of the community to develop a single set of tests that will help customers quantify confidence in PV products. This paper evaluates the need for quality assurance (QA) standards and suggests a path for creating these. Two types of standards are needed: 1) QA of the module design and 2) QA of the manufacturing process.

  3. PROJECT PROFILE: Advanced Thermal Management for Higher Module Power Output

    Broader source: Energy.gov [DOE]

    Higher temperatures of photovoltaic (PV) modules are causing lower than projected module performance. For example, a free-standing Si PV module has 0.4% decrease in efficiency per degree Celsius. Reducing the module temperature to near ambient levels will increase yearly energy output by 8%. This project will enable lower operating temperatures for modules, resulting in higher module power output and lower levelized cost of electricity (LCOE).

  4. Stacked vapor fed amtec modules

    DOE Patents [OSTI]

    Sievers, Robert K.

    1989-01-01

    The present invention pertains to a stacked AMTEC module. The invention includes a tubular member which has an interior. The member is comprised of a ion conductor that substantially conducts ions relative to electrons, preferably a beta"-alumina solid electrolyte, positioned about the interior. A porous electrode for conducting electrons and allowing sodium ions to pass therethrough, and wherein electrons and sodium ions recombine to form sodium is positioned about the beta"-alumina solid electrolyte. The electrode is operated at a temperature and a pressure that allows the recombined sodium to vaporize. Additionally, an outer current collector grid for distributing electrons throughout the porous electrode is positioned about and contacts the porous electrode. Also included in the invention is transporting means for transporting liquid sodium to the beta"-alumina solid electrolyte of the tubular member. A transition piece is positioned about the interior of the member and contacts the transporting means. The transition piece divides the member into a first cell and a second cell such that each first and second cell has a beta"-alumina solid electrolyte, a first and second porous electrode and a grid. The transition piece conducts electrons from the interior of the tubular member. There is supply means for supplying sodium to the transporting means. Preferably the supply means is a shell which surrounds the tubular member and is operated at a temperature such that the vaporized sodium condenses thereon. Returning means for returning the condensed sodium from the shell to the transporting means provides a continuous supply of liquid sodium to the transporting means. Also, there are first conducting means for conducting electric current from the transition piece which extends through the shell, and second conducting means for conducting electric current to the grid of the first cell which extends through the shell.

  5. Module: Emission Factors for Deforestation | Open Energy Information

    Open Energy Info (EERE)

    www.leafasia.orgtoolstechnical-guidance-series-emission-factors-defo Cost: Free Language: English Module: Emission Factors for Deforestation Screenshot Logo: Module: Emission...

  6. DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Standards Policy & Procedures (TSPP) Tutorial Modules Available DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules Available April 7, 2016 - 2:48pm ...

  7. General Renewable Energy Technology Module | Open Energy Information

    Open Energy Info (EERE)

    Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: General Renewable Energy Technology Module AgencyCompany Organization: World Bank Sector: Energy...

  8. APT Target-Blanket Module - Fabrication and Characterization...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: APT Target-Blanket Module - Fabrication and Characterization of Prototypical Assemblies Citation Details In-Document Search Title: APT Target-Blanket Module - ...

  9. Nanoscale Periodic Modulations on Sodium Chloride Induced by...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Nanoscale Periodic Modulations on Sodium Chloride Induced by Surface Charges Citation Details In-Document Search Title: Nanoscale Periodic Modulations on Sodium ...

  10. Microsoft PowerPoint - FinalModule7.ppt

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7: Integrated Baseline Review and Change Control Prepared by: Module 7 - Integrated Baseline Review and Change Control 1 Prepared by: Booz Allen Hamilton Module 7: Integrated ...

  11. Generation of Coherent X-Ray Radiation through Modulation Compression...

    Office of Scientific and Technical Information (OSTI)

    Generation of Coherent X-Ray Radiation through Modulation Compression Citation Details In-Document Search Title: Generation of Coherent X-Ray Radiation through Modulation Compression ...

  12. Tailored Terahertz Pulses from a Laser-Modulated Electron Beam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Researchers at the ... terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. ...

  13. PROJECT PROFILE: Advanced Thermal Management for Higher Module...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    National Renewable Energy Laboratory, Golden, CO Amount Awarded: 2,816,911 Higher temperatures of photovoltaic (PV) modules are causing lower than projected module performance. ...

  14. Partial Shade Stress Test for Thin-Film Photovoltaic Modules...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Partial Shade Stress Test for Thin-Film Photovoltaic Modules Preprint Timothy J. ... Partial shade stress test for thin-film photovoltaic modules Timothy J Silverman , ...

  15. Linkage to Previous International PV Module QA Task Force Workshops...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Linkage to Previous International PV Module QA Task Force Workshops: Proposal for Rating System Linkage to Previous International PV Module QA Task Force Workshops: Proposal for ...

  16. NREL: Performance and Reliability R&D - PV Module Reliability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Performance Reliability R&D Photovoltaics Research Performance Reliability R and D Printable Version PV Module Reliability Workshop NREL hosts an annual Photovoltaic Module...

  17. Module 1 - Introduction to Earned Value | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and defines the framework necessary for proper Earned Value management implementation. ... Module 7 - Integrated Baseline Review and Change Control Module 8 - Reporting

  18. Module: Activity Data for Deforestation | Open Energy Information

    Open Energy Info (EERE)

    Website: www.leafasia.orgtoolstechnical-guidance-series-activity-data-defores Cost: Free Language: English Module: Activity Data for Deforestation Screenshot Logo: Module:...

  19. Statistical and Domain Analytics Applied to PV Module Lifetime...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science ...

  20. NREL: Performance and Reliability R&D - PV Module Reliability...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Module Reliability Workshop NREL hosts an annual Photovoltaic Module Reliability Workshop (PVMRW) so that solar technology experts can share information leading to the ...

  1. WRAP Module 1 sampling and analysis plan

    SciTech Connect (OSTI)

    Mayancsik, B.A.

    1995-03-24

    This document provides the methodology to sample, screen, and analyze waste generated, processed, or otherwise the responsibility of the Waste Receiving and Processing Module 1 facility. This includes Low-Level Waste, Transuranic Waste, Mixed Waste, and Dangerous Waste.

  2. Photovoltaic module with removable wind deflector

    SciTech Connect (OSTI)

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2012-08-07

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  3. DETECTOR FOR MODULATED AND UNMODULATED SIGNALS

    DOE Patents [OSTI]

    Patterson, H.H.; Webber, G.H.

    1959-08-25

    An r-f signal-detecting device is described, which is embodied in a compact coaxial circuit principally comprising a detecting crystal diode and a modulating crystal diode connected in parallel. Incoming modulated r-f signals are demodulated by the detecting crystal diode to furnish an audio input to an audio amplifier. The detecting diode will not, however, produce an audio signal from an unmodulated r-f signal. In order that unmodulated signals may be detected, such incoming signals have a locally produced audio signal superimposed on them at the modulating crystal diode and then the"induced or artificially modulated" signal is reflected toward the detecting diode which in the process of demodulation produces an audio signal for the audio amplifier.

  4. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2014-02-18

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  5. Photovoltaic module with removable wind deflector

    DOE Patents [OSTI]

    Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

    2013-05-28

    A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

  6. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2012-09-04

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  7. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2014-06-10

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  8. Rack assembly for mounting solar modules

    DOE Patents [OSTI]

    Plaisted, Joshua Reed; West, Brian

    2010-12-28

    A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

  9. Optimal design of reverse osmosis module networks

    SciTech Connect (OSTI)

    Maskan, F.; Wiley, D.E.; Johnston, L.P.M.; Clements, D.J.

    2000-05-01

    The structure of individual reverse osmosis modules, the configuration of the module network, and the operating conditions were optimized for seawater and brackish water desalination. The system model included simple mathematical equations to predict the performance of the reverse osmosis modules. The optimization problem was formulated as a constrained multivariable nonlinear optimization. The objective function was the annual profit for the system, consisting of the profit obtained from the permeate, capital cost for the process units, and operating costs associated with energy consumption and maintenance. Optimization of several dual-stage reverse osmosis systems were investigated and compared. It was found that optimal network designs are the ones that produce the most permeate. It may be possible to achieve economic improvements by refining current membrane module designs and their operating pressures.

  10. PV Module Reliability Research (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01

    This National Center for Photovoltaics sheet describes the capabilities of its PV module reliability research. The scope and core competencies and capabilities are discussed and recent publications are listed.

  11. Reciprocal-space and real-space analyses of compositional modulation in InAs/AlAs short-period superlattices

    SciTech Connect (OSTI)

    FOLLSTAEDT,DAVID M.; LEE,STEPHEN R.; RENO,JOHN L.; JONES,ERIC D.; TWESTEN,R.D.; NORMAN,A.G.; AHRENKIEL,S.P.; MOUTINHO,H.R.; MASCARENHAS,A.; MILLUNCHICK,J. MIRECKI

    2000-01-25

    The microstructure of lateral composition modulation in InAs/AlAs superlattices grown by MBE on InP is examined. The use of x-ray diffraction, TEM, AFM, and STEM to characterize the modulations is discussed. Combining the information from these techniques gives increased insight into the phenomenon and how to manipulate it. Diffraction measures the intensity of modulation and its wavelength, and is used to identify growth conditions giving strong modulation. The TEM and STEM analyses indicate that local compositions are modulated by as much as 0.38 InAs mole fraction. Plan-view images show that modulated structures consists of short ({approx_lt}0.2 {micro}m) In-rich wires with a 2D organization in a (001) growth plane. However, growth on miscut substrates can produce a single modulation along the miscut direction with much longer wires ({approx_gt}0.4 {micro}m), as desired for potential applications. Photoluminescence studies demonstrate that the modulation has large effects on the bandgap energy of the superlattice.

  12. Ultralight photovoltaic modules for unmanned aerial vehicles

    SciTech Connect (OSTI)

    Nowlan, M.J.; Maglitta, J.C.; Darkazalli, G.; Lamp, T.

    1997-12-31

    New lightweight photovoltaic modules are being developed for powering high altitude unmanned aerial vehicles (UAVs). Modified low-cost terrestrial solar cell and module technologies are being applied to minimize vehicle cost. New processes were developed for assembling thin solar cells, encapsulant films, and cover films. An innovative by-pass diode mounting approach that uses a solar cell as a heat spreader was devised and tested. Materials and processes will be evaluated through accelerated environmental testing.

  13. Thermoelectrics Partnership: Automotive Thermoelectric Modules with

    Broader source: Energy.gov (indexed) [DOE]

    Scalable Thermo- and Electro-Mechanical Interfaces | Department of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting ace067_goodson_2012_o.pdf (5.6 MB) More Documents & Publications Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces

  14. Thermoelectrics Partnership: Automotive Thermoelectric Modules with

    Broader source: Energy.gov (indexed) [DOE]

    Scalable Thermo- and Electro-Mechanical Interfaces | Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation ace067_goodson_2011_o.pdf (1.89 MB) More Documents & Publications Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel Nanostructured Interface Solution for Automotive Thermoelectric Modules Application

  15. Process of making solar cell module

    DOE Patents [OSTI]

    Packer, M.; Coyle, P.J.

    1981-03-09

    A process is presented for the manufacture of solar cell modules. A solution comprising a highly plasticized polyvinyl butyral is applied to a solar cell array. The coated array is dried and sandwiched between at last two sheets of polyvinyl butyral and at least two sheets of a rigid transparent member. The sandwich is laminated by the application of heat and pressure to cause fusion and bonding of the solar cell array with the rigid transparent members to produce a solar cell module.

  16. NEMS Freight Transportation Module Improvement Study

    U.S. Energy Information Administration (EIA) Indexed Site

    NEMS Freight Transportation Module Improvement Study February 2015 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | NEMS Freight Transportation Module Improvement Study i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other

  17. WUFI Basement Module | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    WUFI Basement Module WUFI Basement Module WUFI is a menu-driven PC program which allows realistic calculation of the transient coupled one-dimensional heat and moisture transport in multi-layer building components exposed to natural weather. Click the image to see an animated version of the software. WUFI is a menu-driven PC program which allows realistic calculation of the transient coupled one-dimensional heat and moisture transport in multi-layer building components exposed to natural

  18. Better Buildings Network View | September 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2015 Better Buildings Network View | September 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View September 2015 (528.19 KB) More Documents & Publications ITP Aluminum: Technical Working Group on Inert Anode Technologies EIS-0333: Draft Environmental Impact Statement ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry

  19. Cell shunt resistance and photovoltaic module performance

    SciTech Connect (OSTI)

    McMahon, T.J.; Basso, T.S.; Rummel, S.R.

    1996-05-01

    Shunt resistance of cells in photovoltaic modules can affect module power output and could indicate flawed manufacturing processes and reliability problems. The authors describe a two-terminal diagnostic method to directly measure the shunt resistance of individual cells in a series-connected module non-intrusively, without deencapsulation. Peak power efficiency vs. light intensity was measured on a 12-cell, series-connected, single crystalline module having relatively high cell shunt resistances. The module was remeasured with 0.5-, 1-, and 2-ohm resistors attached across each cell to simulate shunt resistances of several emerging technologies. Peak power efficiencies decreased dramatically at lower light levels. Using the PSpice circuit simulator, the authors verified that cell shunt and series resistances can indeed be responsible for the observed peak power efficiency vs. intensity behavior. The authors discuss the effect of basic cell diode parameters, i.e., shunt resistance, series resistance, and recombination losses, on PV module performance as a function of light intensity.

  20. Nuclear modules of ITER tokamak systems code

    SciTech Connect (OSTI)

    Gohar, Y.; Baker, C.; Brooks, J.; Finn, P.; Hassanein, A.; Willms, S.; Barr, W.; Bushigin, A.; Kalyanam, K.M.; Haines, J.

    1987-10-01

    Nuclear modules were developed to model various reactor components in the ITER systems code. Several design options and cost algorithms are included for each component. The first wall, blanket and shield modules calculate the beryllium zone thickness, the disruptions results, the nuclear responses in different components including the toroidal field coils. Tungsten shield/water coolant/steel structure and steel shield/water coolant are the shield options for the inboard and outboard sections of the reactor. Lithium nitrate dissolved in the water coolant with a variable beryllium zone thickness in the outboard section of the reactor provides the tritium breeding capability. The reactor vault module defines the thickness of the reactor wall and the roof based on the dose equivalent during operation including skyshine contribution. The impurity control module provides the design parameters for the divertor including plate design, heat load, erosion rate, tritium permeation through the plate material to the coolant, plasma contamination by sputtered impurities, and plate lifetime. Several materials: Be, C, V, Mo, and W can be used for the divertor plate to cover a range of plasma edge temperatures. The tritium module calculates tritium and deuterium flow rates for the reactor plant. The tritium inventory in the fuelers, neutral beams, vacuum pumps, impurity control, first wall, and blanket is calculated. Tritium requirements are provided for different operating conditions. The nuclear models are summarized in this paper including the different design options and key analyses of each module. 39 refs., 3 tabs.

  1. Improved information analysis - views and actions

    SciTech Connect (OSTI)

    Sheely, K.B.; Manatt, D.R.

    1995-07-01

    The IAEA continues to assess, develop, and test recommendations for strengthening the cost effectiveness of safeguards. The IAEA`s investigation has focused on ways to increase Agency access to data, including access to sites and site data, export/import data, environmental data, open-source data, and other expanded data sources. Although the acquisition of this raw data is essential to strengthening safeguards, the effectiveness of the system is going to be judged by what the Agency does with the data once they have acquired it. Therefore, the IAEA must have the capability to organize, analyze and present the data in a timely manner for internal management evaluation and external dissemination. The United States Department of Energy has established a Safeguards Information Management Systems (SIMS) Initiative to provide support and equipment which will improve the IAEA`s capability to utilize this expanded data to analyze State`s nuclear activities. This paper will present views on steps to improve information analysis and discuss the status of actions undertaken by the SIMS initiative.

  2. MediaWiki:Pagetitle-view-mainpage | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Energy Information and Data | OpenEI.org Retrieved from "http:en.openei.orgwindex.php?titleMediaWiki:Pagetitle-view-mainpage&oldid277068...

  3. March 2016 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  4. June 2014 Most Viewed Documents for Renewable Energy Sources...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Renewable Energy Sources Chapter 6. Drilling and Well Construction Culver, Gene (1998) 426 Chapter 11. Heat Exchangers Rafferty, Kevin D.; ...

  5. Helix Wind Inc formerly ClearView Acquisitions | Open Energy...

    Open Energy Info (EERE)

    (formerly ClearView Acquisitions) Place: San Diego, California Zip: 92113 Sector: Wind energy Product: California-based manufacturer of small scale wind turbines. References: Helix...

  6. January 2013 Most Viewed Documents for Fission And Nuclear Technologie...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Fission And Nuclear Technologies Laboratory studies of shearleach processing of zircaloy clad metallic uranium reactor fuel Swanson, J.L.; ...

  7. Tools for Viewing and Quality Checking ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools for Viewing and Quality Checking ARM Data S. Bottone and S. Moore Mission Research Corporation Santa Barbara, California Introduction Mission Research Corporation (MRC) is...

  8. September 2013 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2013 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 169 ...

  9. July 2013 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 2013 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 567 A ...

  10. March 2014 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 2014 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 291 Ten ...

  11. December 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1446 ...

  12. June 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 833 Lecture ...

  13. September 2015 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2015 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1049 ...

  14. Mountain View Acres, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Mountain View Acres, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 34.496663, -117.3489352 Show Map Loading map......

  15. Mountain View, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mountain View, California: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 37.3860517, -122.0838511 Show Map Loading map......

  16. Mountain View, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mountain View, Colorado: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.7744311, -105.0555389 Show Map Loading map... "minzoom":false,"mapp...

  17. March 2016 Most Viewed Documents for Geosciences | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Geosciences Gas-phase diffusion in porous media: ... Transport in Variable Saturated Geologic Media Xu, Tianfu; Sonnenthal, Eric; Spycher, ...

  18. High Performance Builder Spotlight: Clifton View Homes II

    SciTech Connect (OSTI)

    2011-01-01

    Clifton View Homes builds superefficient homes that qualify for DOE’s Builders Challenge like this home on Whidbey Island that achieves a 57 on the HERS index.

  19. June 2014 Most Viewed Documents for Engineering | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Engineering Damage identification and health ... D.; Bezburuah, R.; Ding, J. (1991) 22 Laser Engineered Net Shaping (LENS(TM)): A Tool ...

  20. New Window Technology Saves Energy and the View | Department...

    Energy Savers [EERE]

    Window Technology Saves Energy and the View New Window Technology Saves Energy and the ... Laboratory are developing innovative new window technology that helps improve ...

  1. Better Buildings Network View | September 2014 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Network View | December 2014 On-Bill Financing for Energy Efficiency Improvements Toolkit

  2. Better Buildings Network View | February 2015 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Better Buildings Network View | June 2015 Nothing But Networking for Residential Network ...

  3. Better Buildings Network View | November 2014 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Better Buildings Network View | July-August 2014 Better Buildings Residential Network ...

  4. Better Buildings Network View | December 2015 | Department of...

    Office of Environmental Management (EM)

    newsletter from the U.S. Department of Energy's Better Buildings Residential Network. ... Network View | July-August 2015 Better Buildings Residential Network Orientation Webinar

  5. April 2013 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for Biology And Medicine Publications in biomedical and environmental sciences programs, 1981 Moody, J.B. (comp.) (1982) 306 Drug Retention Times ...

  6. June 2015 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    June 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  7. September 2015 Most Viewed Documents for Biology And Medicine...

    Office of Scientific and Technical Information (OSTI)

    September 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  8. March 2014 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for Biology And Medicine Carbon Dioxide Sequestering Using Microalgal Systems Daniel J. Stepan; Richard E. Shockey; Thomas A. Moe; Ryan Dorn (2002) ...

  9. December 2015 Most Viewed Documents for Biology And Medicine...

    Office of Scientific and Technical Information (OSTI)

    December 2015 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United ...

  10. Forest View, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Forest View, Illinois: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.8086431, -87.7933895 Show Map Loading map... "minzoom":false,"mapping...

  11. January 2013 Most Viewed Documents for Biology And Medicine ...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Biology And Medicine Nevada Test Site Radiological Control Manual Radiological Control Managers' Council Nevada Test Site Effects of ionizing ...

  12. September 2013 Most Viewed Documents for Fission And Nuclear...

    Office of Scientific and Technical Information (OSTI)

    September 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of ... Tianfu; Pruess, Karsten (2001) 45 LWR nuclear fuel bundle data for use in fuel bundle ...

  13. June 2015 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    June 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... MIGRATION IN SOILS OF THE CHERNOBYL NUCLEAR POWER PLANT EXCLUSION ZONE Farfan, E ...

  14. Most Viewed Documents for Fission and Nuclear Technologies: December...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Fission and Nuclear Technologies: December 2014 Stress analysis ... States)) (1992) 67 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  15. June 2014 Most Viewed Documents for National Defense | OSTI,...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for National Defense The Effects of Nuclear Weapons ... Vigil, M.G. (1996) 13 Ground-based Nuclear Detonation Detection (GNDD) Technology ...

  16. March 2016 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    March 2016 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... methods and test results utilized for nuclear core applications (LWBR Development ...

  17. December 2015 Most Viewed Documents for Fission And Nuclear Technologi...

    Office of Scientific and Technical Information (OSTI)

    December 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... methods and test results utilized for nuclear core applications (LWBR Development ...

  18. March 2014 Most Viewed Documents for National Defense | OSTI...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for National Defense The Effects of Nuclear Weapons ... States) (1995) 13 The history of nuclear weapon safety devices Plummer, D.W.; ...

  19. A Lidar View of Clouds in Southeastern China

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lidar View of Clouds in Southeastern China For original submission and image(s), see ARM Research Highlights http:www.arm.govsciencehighlights Research Highlight From May 2008...

  20. September 2013 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    September 2013 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2010 Toyota Prius Hybrid Synergy Drive System Burress, Timothy A ORNL; Campbell, ...

  1. March 2014 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    March 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  2. Most Viewed Documents for Energy Storage, Conversion, and Utilization...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Energy Storage, Conversion, and Utilization: December 2014 Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  3. June 2014 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2004 Toyota Prius Hybrid Electric Drive System Staunton, R.H.; Ayers, C.W.; Chiasson, ...

  4. March 2015 Most Viewed Documents for Energy Storage, Conversion...

    Office of Scientific and Technical Information (OSTI)

    March 2015 Most Viewed Documents for Energy Storage, Conversion, And Utilization Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  5. Most Viewed Documents for Energy Storage, Conversion, and Utilization...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Energy Storage, Conversion, and Utilization: September 2014 Process ... 2007 Toyota Camry Hybrid Syneregy Drive System Burress, T.A.; Coomer, C.L.; Campbell, ...

  6. BrightView Systems Ltd | Open Energy Information

    Open Energy Info (EERE)

    Ltd Jump to: navigation, search Name: BrightView Systems Ltd Place: Petach-Tikva, Israel Zip: 49510 Product: Has developed an unspecified technology for PV cell manufacture....

  7. The Better Buildings Neighborhood View -- December 2013 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Better Buildings Neighborhood View -- July 2013 Focus Series: Philadelphia Energyworks: In the City of Brotherly Love, Sharing Know-How Leads to Sustainability The Better ...

  8. January 2013 Most Viewed Documents for Materials | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    January 2013 Most Viewed Documents for Materials Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel Oguzie, Emeka E. Electrochemistry ...

  9. Residential Windows and Window Coverings: A Detailed View of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Windows and Window Coverings: A Detailed View of the Installed Base and User Behavior SEPTEMBER 2013 Prepared for: Building Technologies Office Office of Energy ...

  10. April 2013 Most Viewed Documents for Power Generation And Distribution...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    April 2013 Most Viewed Documents for Power Generation And Distribution Electric power ... (1998) 64 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  11. March 2014 Most Viewed Documents for Power Generation And Distribution...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    March 2014 Most Viewed Documents for Power Generation And Distribution ASPEN Plus Simulation ... (1982) 18 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  12. September 2013 Most Viewed Documents for Power Generation And...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 2013 Most Viewed Documents for Power Generation And Distribution Electric power ... (1996) 21 Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar ...

  13. Better Buildings Network View | July-August 2015 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5 Better Buildings Network View | July-August 2015 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network. Better Buildings Network View July-August 2015 (344.42 KB) More Documents & Publications Better Buildings Network View | May 2015 Better Buildings Network View | June 2015 Better Buildings Network View | April

  14. View discovery in OLAP databases through statistical combinatorial optimization

    SciTech Connect (OSTI)

    Hengartner, Nick W; Burke, John; Critchlow, Terence; Joslyn, Cliff; Hogan, Emilie

    2009-01-01

    OnLine Analytical Processing (OLAP) is a relational database technology providing users with rapid access to summary, aggregated views of a single large database, and is widely recognized for knowledge representation and discovery in high-dimensional relational databases. OLAP technologies provide intuitive and graphical access to the massively complex set of possible summary views available in large relational (SQL) structured data repositories. The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of 'views' of an OLAP database as a combinatorial object of all projections and subsets, and 'view discovery' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline 'hop-chaining' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a 'spiraling' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

  15. View Factor Calculation for Three-Dimensional Geometries.

    SciTech Connect (OSTI)

    1989-06-20

    Version 00 MCVIEW calculates the radiation geometric view factor between surfaces for three dimensional geometries with and without interposed third surface obstructions. It was developed to calculate view factors for input data to heat transfer analysis programs such as SCA-03/TRUMP, SCA-01/HEATING-5 and PSR-199/HEATING-6.

  16. Single, stretched membrane, structural module experiments

    SciTech Connect (OSTI)

    Wood, R.L.

    1986-02-01

    This report describes tests done on stretched-membrane heliostats used to reflect solar radiation onto a central receiver. The tests were used to validate prior analysis and mathematical models developed to describe module performance. The modules tested were three meters in diameter and had reflective polymer film laminated to the membrane. The frames were supported at three points equally spaced around the ring. Three modules were pneumatically attached with their weight suspended at the bottom support, two were pneumatically attached with their weight suspended from the upper mounts, and one was rigidly attached with its weight suspended at the bottom mount. By varying the membrane tension we could simulate a uniform wind loading normal to the mirror's surface. A video camera 15+ meters away from the mirror recorded the virtual image of a target grid as reflected by the mirrors' surface. The image was digitized and stored on a microcomputer. Using the law of reflection and analytic geometry, we computed the surface slopes of a sampling of points on the surface. The dominant module response was consistent with prior SERI analyses. The simple analytical model is quite adequate for designing and sizing single-membrane modules if the initial imperfections and their amplification are appropriately controlled. To avoid potential problems resulting from the fundamentally n = 2 deformation phenomena, we advise using either relatively stiffer ring frames or more than three support points.

  17. Three dimensional, multi-chip module

    DOE Patents [OSTI]

    Bernhardt, Anthony F.; Petersen, Robert W.

    1993-01-01

    A plurality of multi-chip modules are stacked and bonded around the perimeter by sold-bump bonds to adjacent modules on, for instance, three sides of the perimeter. The fourth side can be used for coolant distribution, for more interconnect structures, or other features, depending on particular design considerations of the chip set. The multi-chip modules comprise a circuit board, having a planarized interconnect structure formed on a first major surface, and integrated circuit chips bonded to the planarized interconnect surface. Around the periphery of each circuit board, long, narrow "dummy chips" are bonded to the finished circuit board to form a perimeter wall. The wall is higher than any of the chips on the circuit board, so that the flat back surface of the board above will only touch the perimeter wall. Module-to-module interconnect is laser-patterned o the sides of the boards and over the perimeter wall in the same way and at the same time that chip to board interconnect may be laser-patterned.

  18. Three dimensional, multi-chip module

    DOE Patents [OSTI]

    Bernhardt, A.F.; Petersen, R.W.

    1993-08-31

    A plurality of multi-chip modules are stacked and bonded around the perimeter by sold-bump bonds to adjacent modules on, for instance, three sides of the perimeter. The fourth side can be used for coolant distribution, for more interconnect structures, or other features, depending on particular design considerations of the chip set. The multi-chip modules comprise a circuit board, having a planarized interconnect structure formed on a first major surface, and integrated circuit chips bonded to the planarized interconnect surface. Around the periphery of each circuit board, long, narrow dummy chips'' are bonded to the finished circuit board to form a perimeter wall. The wall is higher than any of the chips on the circuit board, so that the flat back surface of the board above will only touch the perimeter wall. Module-to-module interconnect is laser-patterned on the sides of the boards and over the perimeter wall in the same way and at the same time that chip to board interconnect may be laser-patterned.

  19. Photovoltaic (PV) Module Level Remote Safety Disconnect - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portal Find More Like This Return to Search Photovoltaic (PV) Module Level Remote Safety Disconnect National Renewable Energy Laboratory Contact NREL About This Technology Figure 1: System configuration of emergency module-level disconnect using module-level &lsquo;Isolation Detection Units&rsquo; (IDU).<br /> Figure 1: System configuration of emergency module-level disconnect using module-level 'Isolation Detection Units' (IDU). Technology Marketing Summary The ability to

  20. Development of Fuel Shuffling Module for PHISICS

    SciTech Connect (OSTI)

    Allan Mabe; Andrea Alfonsi; Cristian Rabiti; Aaron Epiney; Michael Lineberry

    2013-06-01

    PHISICS (Parallel and Highly Innovative Simulation for the INL Code System) [4] code toolkit has been in development at the Idaho National Laboratory. This package is intended to provide a modern analysis tool for reactor physics investigation. It is designed with the mindset to maximize accuracy for a given availability of computational resources and to give state of the art tools to the modern nuclear engineer. This is obtained by implementing several different algorithms and meshing approaches among which the user will be able to choose, in order to optimize his computational resources and accuracy needs. The software is completely modular in order to simplify the independent development of modules by different teams and future maintenance. The package is coupled with the thermo-hydraulic code RELAP5-3D [3]. In the following the structure of the different PHISICS modules is briefly recalled, focusing on the new shuffling module (SHUFFLE), object of this paper.

  1. Plasmon absorption modulator systems and methods

    DOE Patents [OSTI]

    Kekatpure, Rohan Deodatta; Davids, Paul

    2014-07-15

    Plasmon absorption modulator systems and methods are disclosed. A plasmon absorption modulator system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and a metal layer formed on a top surface of the stack of quantum well layers. A method for modulating plasmonic current includes enabling propagation of the plasmonic current along a metal layer, and applying a voltage across the stack of quantum well layers to cause absorption of a portion of energy of the plasmonic current by the stack of quantum well layers. A metamaterial switching system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and at least one metamaterial structure formed on a top surface of the stack of quantum well layers.

  2. Low thermal resistance power module assembly

    DOE Patents [OSTI]

    Hassani, Vahab; Vlahinos, Andreas; Bharathan, Desikan

    2007-03-13

    A power module assembly with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate with passageways or openings for coolant that extend through the plate from a lower surface to an upper surface. A circuit substrate is provided and positioned on the spreader plate to cover the coolant passageways. The circuit substrate includes a bonding layer configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer may be solder material which bonds to the upper surface of the plate to provide a continuous seal around the upper edge of each opening in the plate. The assembly includes power modules mounted on the circuit substrate on a surface opposite the bonding layer. The power modules are positioned over or proximal to the coolant passageways.

  3. Scannerless loss modulated flash color range imaging

    DOE Patents [OSTI]

    Sandusky, John V.; Pitts, Todd Alan

    2008-09-02

    Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

  4. Scannerless loss modulated flash color range imaging

    DOE Patents [OSTI]

    Sandusky, John V.; Pitts, Todd Alan

    2009-02-24

    Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

  5. Module level solutions to solar cell polarization

    DOE Patents [OSTI]

    Xavier, Grace , Li; Bo

    2012-05-29

    A solar cell module includes interconnected solar cells, a transparent cover over the front sides of the solar cells, and a backsheet on the backsides of the solar cells. The solar cell module includes an electrical insulator between the transparent cover and the front sides of the solar cells. An encapsulant protectively packages the solar cells. To prevent polarization, the insulator has resistance suitable to prevent charge from leaking from the front sides of the solar cells to other portions of the solar cell module by way of the transparent cover. The insulator may be attached (e.g., by coating) directly on an underside of the transparent cover or be a separate layer formed between layers of the encapsulant. The solar cells may be back junction solar cells.

  6. Siemens SOFC Test Article and Module Design

    SciTech Connect (OSTI)

    2011-03-31

    Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

  7. License Structure for Multi-Module Facilities

    SciTech Connect (OSTI)

    Thomas Hicks

    2010-08-01

    The Next Generation Nuclear Plant (NGNP) Project is intended to be the prototype for multi-module commercial high temperature gas reactors (HTGRs) for process heat and/or electricity generation. Part of the objectives of the project are to establish the conditions that would govern or enhance the design, licensing, construction and operation of numerous, modular nuclear plants, particularly suited for industrial applications or that could reduce the risk of such projects. A determination is desired regarding whether a multi-module reactor plant can be licensed with a single Nuclear Regulatory Commission (NRC) review, hearing, and safety evaluation report. If it is determined that a multi-modular reactor plant can be licensed under a single review/hearing process, the structure and the duration of the license for each module will also need to be determined. The purpose of this paper is to describe for the NRC the NGNP position on these two issues and obtain either NRC general concurrence or comments on the approach to these issues. While the current NGNP planning provides for only a single reactor module, the project is intended to provide the basis and establish a licensing framework that can be used by future commercial HTGRs and other reactor designs, including a variety of small modular reactor technologies, with configurations reflecting design standardization of multi-module plants. Therefore, it is important to identify a path for addressing these modular reactor plant issues so that the resolution can be factored into the NGNP Project planning. The NGNP position is that a single combined license (COL) application can be submitted for a multi-modular reactor facility, the COL application can undergo a single NRC review/hearing process, and each module should be issued a separate license.

  8. Request for Information on Photovoltaic Module Recycling

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy SunShot Initiative requests feedback from industry, academia, research laboratories, government agencies, and other stakeholders on issues related to photovoltaic (PV) module recycling technology. SunShot intends to understand the current state of recycling technology and the areas of research that could lead to impactful recycling technologies to support the developing PV industry. The intent of this request for information is to generate discussion related to planning for the end of life of photovoltaic modules and to create a list of high impact research topics in photovoltaics recycling.

  9. Soliton dynamics in modulated Bessel photonic lattices

    SciTech Connect (OSTI)

    Ruelas, Adrian; Lopez-Aguayo, Servando; Gutierrez-Vega, Julio C.

    2010-12-15

    We address the existence and the controlled stability of two-dimensional solitons in modulated Bessel lattices (MBL) induced by a superposition of nondiffracting Bessel beams. We show that variation of the modulation parameter of the lattice and the initial transverse momentum of the soliton significantly modify the behavior of the solitons. We find that, under suitable and well-identified conditions, solitons propagating in the MBL exhibit six regimes of transverse mobility: stationary, oscillatory, rotating, unbounded or escape, transitional, and unstable. These results report propagating solitons that can develop these dynamics of transverse motion.

  10. Ponderomotive Forces On Waves In Modulated Media

    SciTech Connect (OSTI)

    Dodin, I.Y; Fisch, Nathaniel

    2014-02-28

    Nonlinear interactions of waves via instantaneous cross-phase modulation can be cast in the same way as ponderomotive wave-particle interactions in high-frequency electromagnetic fi eld. The ponderomotive effect arises when rays of a probe wave scatter off perturbations of the underlying medium produced by a second, modulation wave, much like charged particles scatter off a quasiperiodic field. Parallels with the point-particle dynamics, which itself is generalized by this theory, lead to new methods of wave manipulation, including asymmetric barriers for light.

  11. RFID tag modification for full depth backscatter modulation

    DOE Patents [OSTI]

    Scott, Jeffrey Wayne [Pasco, WA; Pratt, Richard M [Richland, WA

    2010-07-20

    A modulated backscatter radio frequency identification device includes a diode detector configured to selectively modulate a reply signal onto an incoming continuous wave; communications circuitry configured to provide a modulation control signal to the diode detector, the diode detector being configured to modulate the reply signal in response to be modulation control signal; and circuitry configured to increase impedance change at the diode detector which would otherwise not occur because the diode detector rectifies the incoming continuous wave while modulating the reply signal, whereby reducing the rectified signal increases modulation depth by removing the reverse bias effects on impedance changes. Methods of improving depth of modulation in a modulated backscatter radio frequency identification device are also provided.

  12. DOE - NNSA/NFO -- Photo Library News & Views

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Views NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Photo Library - NTS 50th Anniversary Newsletter (News & Views) This special issue of the NTS News & Views is dedicated to the thousands of men and women at the Nevada National Security Site (NNSS), who for 42 years have provided this Nation with a safe, strong and effective nuclear deterrent. This issue spotlights major events at the NTS from 1951 through 1993. Instructions: Click the photograph THUMBNAIL to

  13. Linear-array ultrasonic waveguide transducer for under sodium viewing.

    SciTech Connect (OSTI)

    Sheen, S. H.; Chien, H. T.; Wang, K.; Lawrence, W. P.; Engel, D.; Nuclear Engineering Division

    2010-09-01

    In this report, we first present the basic design of a low-noise waveguide and its performance followed by a review of the array transducer technology. The report then presents the concept and basic designs of arrayed waveguide transducers that can apply to under-sodium viewing for in-service inspection of fast reactors. Depending on applications, the basic waveguide arrays consist of designs for sideway and downward viewing. For each viewing application, two array geometries, linear and circular, are included in design analysis. Methods to scan a 2-D target using a linear array waveguide transducer are discussed. Future plan to develop a laboratory array waveguide prototype is also presented.

  14. Light modulated electron beam driven radiofrequency emitter

    DOE Patents [OSTI]

    Wilson, M.T.; Tallerico, P.J.

    1979-10-10

    The disclosure relates to a light modulated electron beam-driven radiofrequency emitter. Pulses of light impinge on a photoemissive device which generates an electron beam having the pulse characteristics of the light. The electron beam is accelerated through a radiofrequency resonator which produces radiofrequency emission in accordance with the electron, hence, the light pulses.

  15. Pulse width modulation inverter with battery charger

    DOE Patents [OSTI]

    Slicker, James M.

    1985-01-01

    An inverter is connected between a source of DC power and a three-phase AC induction motor, and a microprocessor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .theta., where .theta. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands for electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

  16. Light modulated switches and radio frequency emitters

    DOE Patents [OSTI]

    Wilson, Mahlon T.; Tallerico, Paul J.

    1982-01-01

    The disclosure relates to a light modulated electron beam driven radiofrequency emitter. Pulses of light impinge on a photoemissive device which generates an electron beam having the pulse characteristics of the light. The electron beam is accelerated through a radiofrequency resonator which produces radiofrequency emission in accordance with the electron, hence, the light pulses.

  17. Dark-matter harmonics beyond annual modulation

    SciTech Connect (OSTI)

    Lee, Samuel K.; Lisanti, Mariangela; Safdi, Benjamin R. E-mail: mlisanti@princeton.edu

    2013-11-01

    The count rate at dark-matter direct-detection experiments should modulate annually due to the motion of the Earth around the Sun. We show that higher-frequency modulations, including daily modulation, are also present and in some cases are nearly as strong as the annual modulation. These higher-order modes are particularly relevant if (i) the dark matter is light, O(10) GeV, (ii) the scattering is inelastic, or (iii) velocity substructure is present; for these cases, the higher-frequency modes are potentially observable at current and ton-scale detectors. We derive simple expressions for the harmonic modes as functions of the astrophysical and geophysical parameters describing the Earth's orbit, using an updated expression for the Earth's velocity that corrects a common error in the literature. For an isotropic halo velocity distribution, certain ratios of the modes are approximately constant as a function of nuclear recoil energy. Anisotropic distributions can also leave observable features in the harmonic spectrum. Consequently, the higher-order harmonic modes are a powerful tool for identifying a potential signal from interactions with the Galactic dark-matter halo.

  18. WRAP Module 1 waste characterization plan

    SciTech Connect (OSTI)

    Mayancsik, B.A.

    1995-01-23

    The purpose of this document is to present the characterization methodology for waste generated, processed, or otherwise the responsibility of the Waste Receiving and Processing (WRAP) Module 1 facility. The scope of this document includes all solid low level waste (LLW), transuranic (TRU), mixed waste (MW), and dangerous waste. This document is not meant to be all-inclusive of the waste processed or generated within WRAP Module 1, but to present a methodology for characterization. As other streams are identified, the method of characterization will be consistent with the other streams identified in this plan. The WRAP Module 1 facility is located in the 200 West Area of the Hanford Site. The facility`s function is two-fold. The first is to verify/characterize, treat and repackage contact handled (CH) waste currently in retrievable storage in the LLW Burial Grounds, Hanford Central Waste Complex, and the Transuranic Storage and Assay Facility (TRUSAF). The second is to verify newly generated CH TRU waste and LLW, including MW. The WRAP Module 1 facility provides NDE and NDA of the waste for both drums and boxes. The NDE is used to identify the physical contents of the waste containers to support waste characterization and processing, verification, or certification. The NDA results determine the radioactive content and distribution of the waste.

  19. Heat exchanger module for stirling engines

    SciTech Connect (OSTI)

    Darche, M. J. P.; Carlquist, S.

    1985-02-12

    The invention relates to Stirling engines and provides a modular assembly composed of a cylinder head, a heater, a regenerator, a cooler and a cold duct, and making it possible by mounting a plurality of identical modules on an engine assembly to construct a multi-cylinder double acting Stirling engine of the indirect heating type.

  20. Optical wavelength modulation in free electron lasers

    SciTech Connect (OSTI)

    Mabe, R.M.; Wong, R.K.; Colson, W.B.

    1995-12-31

    An attribute of the free electron laser (FEL) is the continuous tunability of the optical wavelength by modulation of the electron beam energy. The variation of the wavelength and power of the optical beam is studied as a function of FEL operating parameters. These results will be applied to the Stanford SCA FEL and Boeing FEL.

  1. Mountain View Electric Association, Inc- Energy Efficiency Rebates Program

    Broader source: Energy.gov [DOE]

    Mountain View Electric Association, Inc. (MVEA) and Tri-State Generation and Transmission Association Inc., MVEA’s power supplier, offers rebates to MVEA customers who install qualifying energy...

  2. PPPL's "Star Power" video offers compelling view of Laboratory...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Visit http:www.pppl.gov. . Contact Info PPPL Office of Communications Email: PPPLOOC@pppl.gov Phone: 609-243-2755 Download Select and View High Resolution Images to Download ...

  3. Desert View Highlands, California: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. Desert View Highlands is a census-designated place in Los Angeles County, California.1...

  4. How can I view submitted materials? | OpenEI Community

    Open Energy Info (EERE)

    Groups Menu You must login in order to post into this group. Recent content Travis Brown and Kamran Baksh, Final Submission For various reasons, you may w... How can I view...

  5. March 2015 Most Viewed Documents for Mathematics And Computing...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 1019 A comparison of ...

  6. June 2014 Most Viewed Documents for Mathematics And Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    June 2014 Most Viewed Documents for Mathematics And Computing Process Equipment Cost Estimation, Final Report H.P. Loh; Jennifer Lyons; Charles W. White, III (2002) 337 The Effects ...

  7. The Better Buildings Neighborhood View - Summer 2011 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summer 2011 The Better Buildings Neighborhood View - Summer 2011 The quarterly update newsletter of the Better Buildings program of the U.S. Department of Energy. PDF icon BB...

  8. West Pleasant View, Colorado: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West Pleasant View is a census-designated place in Jefferson County, Colorado.1 References...

  9. West View, Pennsylvania: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Hide Map This article is a stub. You can help OpenEI by expanding it. West View is a borough in Allegheny County, Pennsylvania. It falls under Pennsylvania's 4th...

  10. File and Directory Management Tool: view, organize, transfer...

    Office of Scientific and Technical Information (OSTI)

    Title: File and Directory Management Tool: view, organize, transfer files Not Specified Authors: Smith, N. G. ; O'Neill, N. J. ; Spencer, P. N. ; Long, J. W. Publication Date: ...

  11. March 2014 Most Viewed Documents for Engineering | OSTI, US Dept...

    Office of Scientific and Technical Information (OSTI)

    4 Most Viewed Documents for Engineering Damage identification and health monitoring of ... solutions VanSant, J.H. (1980) 46 Laser Engineered Net Shaping (LENS(TM)): A Tool ...

  12. Chevy Chase View, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Chevy Chase View is a town in Montgomery County, Maryland. It falls under Maryland's 8th congressional district.12...

  13. March 2015 Most Viewed Documents for Biology And Medicine | OSTI...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Biology And Medicine Measuring dopamine release in the human brain with PET Volkow, N.D. Brookhaven National Lab., Upton, NY (United States)|State ...

  14. April 2013 Most Viewed Documents for National Defense | OSTI...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for National Defense Vapor-liquid equilibria for nitric acid-water and plutonium nitrate-nitric acid-water solutions Maimoni, A. (1980) 95 SMART ...

  15. September 2015 Most Viewed Documents for Fission And Nuclear...

    Office of Scientific and Technical Information (OSTI)

    September 2015 Most Viewed Documents for Fission And Nuclear Technologies Estimation of ... structures Chen, S.S. (1985) 167 LWR nuclear fuel bundle data for use in fuel bundle ...

  16. March 2015 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    5 Most Viewed Documents for Fission And Nuclear Technologies Stress analysis and ... Maimoni, A. (1980) 101 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  17. Most Viewed Documents for Fission And Nuclear Technologies: September...

    Office of Scientific and Technical Information (OSTI)

    Most Viewed Documents for Fission And Nuclear Technologies: September 2014 Estimation of ... H.J. (1977) 71 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  18. March 2014 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    4 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 72 Peer-review study of the draft ...

  19. July 2013 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    July 2013 Most Viewed Documents for Fission And Nuclear Technologies Estimation of gas ... Ho, F.H. (1988) 136 Behavior of spent nuclear fuel in water pool storage Johnson, A.B. ...

  20. June 2014 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    June 2014 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (1977) 78 Estimation of gas leak rates ...

  1. April 2013 Most Viewed Documents for Fission And Nuclear Technologies...

    Office of Scientific and Technical Information (OSTI)

    April 2013 Most Viewed Documents for Fission And Nuclear Technologies Behavior of spent nuclear fuel in water pool storage Johnson, A.B. Jr. (null) 298 Estimation of gas leak rates ...

  2. Modular Ocean Instrumentation System (MOIS) LabVIEW Software

    SciTech Connect (OSTI)

    Nelson, Eric

    2015-12-03

    Software developed in LabVIEW for the Modular Ocean Instrumentation System is provided. Two documents: MOIS User's Guide and MOIS Software Developer's Guide are included in the submission.

  3. ALS Technique Gives Novel View of Lithium Battery Dendrite Growth

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Technique Gives Novel View of Lithium Battery Dendrite Growth ALS Technique Gives Novel View of Lithium Battery Dendrite Growth Print Thursday, 24 April 2014 09:46 Lithium-ion batteries, popular in today's electronic devices and electric vehicles, could gain significant energy density if their graphite anodes were replaced with lithium metal anodes. But there's a major concern with substituting lithium-when the battery cycles, microscopic fibers of the lithium anodes ("dendrites")

  4. BloombergBusiness: Viewed from space: less corn

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Viewed from space: less corn Viewed from space: less corn U.S. corn production is 2.8 percent smaller than government estimates, according to a daily analysis of infrared satellite images taken of more than 1 million corn fields. September 13, 2015 Domestic corn production will be 13.34 billion bushels, Descartes Labs forecast. Source: Descartes Labs via Bloomberg Domestic corn production will be 13.34 billion bushels, Descartes Labs forecast. Source: Descartes Labs via Bloomberg Corn crop

  5. New ALS Technique Gives Nanoscale Views of Complex Systems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ALS Technique Gives Nanoscale Views of Complex Systems New ALS Technique Gives Nanoscale Views of Complex Systems Print Wednesday, 28 May 2014 00:00 Studying and identifying molecules at the mesoscale has always been challenging-even the best microscopes and spectrometers have difficulty simultaneously identifying and spatially resolving this realm of matter, which ranges from about 10 to 1000 nanometers in size. But ALS researchers recently developed a broadband imaging technique that looks

  6. View from the Bridge: Commercial Vehicle Perspective | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    View from the Bridge: Commercial Vehicle Perspective View from the Bridge: Commercial Vehicle Perspective Truck manufacturer's perspective on technologies to achieve truck propulsion system efficiency gains deer12_greszler.pdf (2.78 MB) More Documents & Publications Roadmap and Technical White Papers for 21st Century Truck Partnership Overview of the DOE High Efficiency Engine Technologies R&D WORKSHOP REPORT: Trucks and Heavy-Duty Vehicles Technical Requirements and Gaps for Lightweight

  7. Dual modulation laser line-locking technique for wavelength modulation spectroscopy

    DOE Patents [OSTI]

    Bomse, David S.; Hovde, D. Christian; Silver, Joel A.

    2002-01-01

    Disclosed are a method and apparatus for dual modulation of an optical spectroscopy laser. Demodulation is accomplished in a manner resulting in measurement of absorbance of a gas species, as well as stabilization of laser wavelength and baseline noise reduction.

  8. Raising the Bar for Quality PV Modules | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Raising the Bar for Quality PV Modules Raising the Bar for Quality PV Modules October 30, 2014 - 4:58pm Addthis As photovoltaics (PV) markets expand across the United States the...

  9. 70005 MODULE AT-- U-X ASSY - Sh

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 MODULE AT-- U-X ASSY MODULE U-X ASS'Y 1:10 1 6 RSF RSF RSF 70005 21607 - 21607 - - - INITIAL ISSUE - - WEIGHT: 3081 LBS FRONT (UPSTREAM SIDE) Parts List ITEM NO. QTY...

  10. Hybrid metasurface for ultra-broadband terahertz modulation ...

    Office of Scientific and Technical Information (OSTI)

    Experimental validations confirm a bandwidth of at least 100%, spanning 0.5 to 1.5 THz with -10 dB modulation depth. This modulation depth is far superior to -5 dB achievable from ...

  11. THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH MIMETIC...

    Office of Scientific and Technical Information (OSTI)

    THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH MIMETIC DIFFUSION FOR EXAFLAG Citation Details In-Document Search Title: THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH ...

  12. Tailored Terahertz Pulses from a Laser-Modulated Electron Beam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Wednesday, 29 November 2006 00:00 Researchers at ...

  13. Module-Integrated Power Converters Based on Universal Dock

    SciTech Connect (OSTI)

    Chapman, Patrick; Rodriguez, Fernando

    2015-03-13

    Solar power installations using alternating current photovoltaic (ACPV) modules have significant cost and performance advantages over systems using conventional solar modules and string inverters. ACPV modules have improved energy harvest due to module-level power point tracking and redundancy. More importantly, ACPV modules are easier and cheaper to install, lowering the total installed cost, indirect costs, and barriers to market entry. Furthermore, ACPV modules have communications and data logging capability, yielding module-level telemetry data that is useful in site diagnostics and other data applications. The products of these efforts were threefold. First, an advanced microinverter power topology was developed, modeled, simulated, and tested. Second, new microinverter enclosure concepts were developed and tested. Third, a new ACPV module prototype was constructed, combining the power topology and the enclosure concepts. SolarBridge filed for patents in each of these areas and is transitioning the project from a concept phase to full development.

  14. SolarBridge Technologies: Helping Solar Modules Speak the Language...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SolarBridge Technologies: Helping Solar Modules Speak the Language of the Energy Grid SolarBridge Technologies: Helping Solar Modules Speak the Language of the Energy Grid June 5, ...

  15. THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH MIMETIC...

    Office of Scientific and Technical Information (OSTI)

    THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH MIMETIC DIFFUSION FOR EXAFLAG Citation Details In-Document Search Title: THE VEX RADIATION MODULE: 2D RADIATION TRANSPORT WITH...

  16. Method and apparatus of highly linear optical modulation

    DOE Patents [OSTI]

    DeRose, Christopher; Watts, Michael R.

    2016-05-03

    In a new optical intensity modulator, a nonlinear change in refractive index is used to balance the nonlinearities in the optical transfer function in a way that leads to highly linear optical intensity modulation.

  17. Module Embedded Microinverter Smart Grid Ready Residential Solar Electric

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System | Department of Energy Module Embedded Microinverter Smart Grid Ready Residential Solar Electric System Module Embedded Microinverter Smart Grid Ready Residential Solar Electric System GE logo.png -- This project is inactive -- This project is developing and demonstrating a cost-reduction approach for an alternating-current (AC) photovoltaic (PV) module that is driven by innovations in microinverter design, module integration and packaging, and integration with a new intelligent

  18. Tailored Terahertz Pulses from a Laser-Modulated Electron Beam

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Wednesday, 29 November 2006 00:00 Researchers at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. Interaction of the ALS electron beam with a femtosecond laser pulse as they co-propagate through a wiggler modulates the electron energies within a

  19. PROJECT PROFILE: Performance Models and Standards for Bifacial PV Module

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technologies | Department of Energy Performance Models and Standards for Bifacial PV Module Technologies PROJECT PROFILE: Performance Models and Standards for Bifacial PV Module Technologies Funding Opportunity: SuNLaMP SunShot Subprogram: Photovoltaics Location: Sandia National Laboratories, Albuquerque, NM Amount Awarded: $3,000,000 Bifacial PV modules absorb sunlight and produce electricity from both the front and back sides of the module and can take advantage of light reflected from a

  20. Photovoltaic Module Reliability Workshop 2013 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Photovoltaic Module Reliability Workshop 2013 Photovoltaic Module Reliability Workshop 2013 February 26-27, 2013 The Photovoltaic (PV) Module Reliability Workshop was held in Golden, Colorado, on Feb. 26-27, 2013. The objective was to share information to improve PV module reliability because such improvements reduce the cost of solar electricity and give investors confidence in the technology. NREL led the workshop, which was sponsored by the U.S. Department of Energy (DOE) Solar Energy

  1. Code division multiple access signaling for modulated reflector technology

    DOE Patents [OSTI]

    Briles, Scott D.

    2012-05-01

    A method and apparatus for utilizing code division multiple access in modulated reflectance transmissions comprises the steps of generating a phase-modulated reflectance data bit stream; modifying the modulated reflectance data bit stream; providing the modified modulated reflectance data bit stream to a switch that connects an antenna to an infinite impedance in the event a "+1" is to be sent, or connects the antenna to ground in the event a "0" or a "-1" is to be sent.

  2. Multidimensional signal modulation and/or demodulation for data communications

    DOE Patents [OSTI]

    Smith, Stephen F.; Dress, William B.

    2008-03-04

    Systems and methods are described for multidimensional signal modulation and/or demodulation for data communications. A method includes modulating a carrier signal in a first domain selected from the group consisting of phase, frequency, amplitude, polarization and spread; modulating the carrier signal in a second domain selected from the group consisting of phase, frequency, amplitude, polarization and spread; and modulating the carrier signal in a third domain selected from the group consisting of phase, frequency, amplitude, polarization and spread.

  3. DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Available | Department of Energy DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules Available DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules Available April 7, 2016 - 2:48pm Addthis DOE Technical Standards Policy & Procedures (TSPP) Tutorial Modules Available The DOE Technical Standards Policy & Procedures (TSPP) tutorial modules are intended to assist and outline the processes for initiating, developing, coordinating, and maintaining DOE

  4. Statistical and Domain Analytics Applied to PV Module Lifetime and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Degradation Science | Department of Energy Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Statistical and Domain Analytics Applied to PV Module Lifetime and Degradation Science Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps2_casewestern_bruckman.pdf (6.77 MB) More Documents & Publications Literature Review of the Effects of UV Exposure on PV Modules Failure Rates from Certification Testing to UL

  5. Integrated Modules for Bioassay (IMBA) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Current Central Registry Toolbox Version(s): IMBA ExpertTM USDOE Edition version 4.0.28 Code Owner: UK Health Protection Agency (HPA) Description: IMBA ExpertTM (IX) software suite comprises a series of independent modules (referred to as sub-modules) that implement the International Commission on Radiological Protection (ICRP) Publication 66, Human Respiratory Tract Model (HRTM) and the ICRP Publications 30 (series),

  6. Rolling in the modulated reheating scenario

    SciTech Connect (OSTI)

    Kobayashi, Naoya; Kobayashi, Takeshi; Erickcek, Adrienne L. E-mail: takeshi@cita.utoronto.ca

    2014-01-01

    In the modulated reheating scenario, the field that drives inflation has a spatially varying decay rate, and the resulting inhomogeneous reheating process generates adiabatic perturbations. We examine the statistical properties of the density perturbations generated in this scenario. Unlike earlier analyses, we include the dynamics of the field that determines the inflaton decay rate. We show that the dynamics of this modulus field can significantly alter the amplitude of the power spectrum and the bispectrum, even if the modulus field has a simple potential and its effective mass is smaller than the Hubble rate. In some cases, the evolution of the modulus amplifies the non-Gaussianity of the perturbations to levels that are excluded by recent observations of the cosmic microwave background. Therefore, a proper treatment of the modulus dynamics is required to accurately calculate the statistical properties of the perturbations generated by modulated reheating.

  7. Photovoltaic module with light reflecting backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C.

    2007-07-03

    A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

  8. High-speed photonic modulator designs

    SciTech Connect (OSTI)

    DeRose, Christopher; Zortman, William A

    2015-02-03

    An optical device includes a microdisk optical resonator element. The microdisk resonator element is formed on a substrate and has upper and lower portions respectively distal and proximal the substrate. An arcuate semiconductor contact region partially surrounds the microdisk resonator element. A first modulator electrode is centrally formed on the upper portion of the microdisk resonator element, and a second modulator electrode is formed on the arcuate contact region. A laminar semiconductor region smaller in thickness than the microdisk resonator element separates the arcuate contact region from the microdisk resonator element and is formed on the substrate so as to electrically connect the arcuate contact region to the lower portion of the microdisk resonator element.

  9. Results from the Second International Module Intercomparison

    SciTech Connect (OSTI)

    Rummel, S.; Anderberg, A.; Emery, K.

    2005-11-01

    The peak-watt rating is a primary indicator of PV performance. The peak power rating is the maximum electrical power that is produced when the PV device is continuously illuminated at 1000 Wm/sup-2/ total irradiance under International Electrotechnical Commission Standard 60904-2 reference spectrum, and 25 deg C cell temperature. Most manufacturers trace their peak-watt rating through calibrations performed at recognized terrestrial calibration facilities. Manufacturers typically perform intercomparisons among a set of their modules internally with other plants and among. Sometimes they have the same module measured at different calibration facilities to determine the differences in calibration. This intercomparison was to mimic this procedure and supply new thin film samples along with samples that could pose other problems. These intercomparisons sample the laboratories' everyday procedures better than a formal intercomparison where the laboratories' best procedures and data scrutiny are used.

  10. Hot gas cross flow filtering module

    DOE Patents [OSTI]

    Lippert, Thomas E.; Ciliberti, David F.

    1988-01-01

    A filter module for use in filtering particulates from a high temperature gas has a central gas duct and at least one horizontally extending support mount affixed to the duct. The support mount supports a filter element thereon and has a chamber therein, which communicates with an inner space of the duct through an opening in the wall of the duct, and which communicates with the clean gas face of the filter element. The filter element is secured to the support mount over an opening in the top wall of the support mount, with releasable securement provided to enable replacement of the filter element when desired. Ceramic springs may be used in connection with the filter module either to secure a filter element to a support mount or to prevent delamination of the filter element during blowback.

  11. Hole-thru-laminate mounting supports for photovoltaic modules

    DOE Patents [OSTI]

    Wexler, Jason; Botkin, Jonathan; Culligan, Matthew; Detrick, Adam

    2015-02-17

    A mounting support for a photovoltaic module is described. The mounting support includes a pedestal having a surface adaptable to receive a flat side of a photovoltaic module laminate. A hole is disposed in the pedestal, the hole adaptable to receive a bolt or a pin used to couple the pedestal to the flat side of the photovoltaic module laminate.

  12. World Energy Projection System Plus (WEPS ): Global Activity Module

    Reports and Publications (EIA)

    2013-01-01

    World Energy Projection System Plus Model Documentation: Global Activity Module Documents the objectives, analytical approach, and development of the World Energy Projection Plus (WEPS ) Global Activity Module (GAM) used to develop the International Energy Outlook for 2013 (IEO2013). The report catalogues and describes the module assumptions, computations, methodology, parameter estimation techniques, and mainframe source code.

  13. Alternative Energy Sources -- An Interdisciplinary Module for Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education | Department of Energy - An Interdisciplinary Module for Energy Education Alternative Energy Sources -- An Interdisciplinary Module for Energy Education Find activities focused on renewable energy sources such as solar and wind. lesson302.pdf (735.79 KB) More Documents & Publications Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources

  14. Positive modulator of bone morphogenic protein-2

    DOE Patents [OSTI]

    Zamora, Paul O.; Pena, Louis A.; Lin, Xinhua; Takahashi, Kazuyuki

    2009-01-27

    Compounds of the present invention of formula I and formula II are disclosed in the specification and wherein the compounds are modulators of Bone Morphogenic Protein activity. Compounds are synthetic peptides having a non-growth factor heparin binding region, a linker, and sequences that bind specifically to a receptor for Bone Morphogenic Protein. Uses of compounds of the present invention in the treatment of bone lesions, degenerative joint disease and to enhance bone formation are disclosed.

  15. Allosteric Modulation of DNA by Small Molecules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Allosteric Modulation of DNA by Small Molecules Signals originating at the cell surface are conveyed by a complex system of interconnected signaling pathways to the nucleus. They converge at transcription factors, which in turn regulate the transcription of sets of genes that result in the gene expression. Many human diseases are caused by dysregulated gene expression and the oversupply of transcription factors may be required for the growth and metastatic behavior of human cancers. Cell

  16. Solar Cell Modules With Improved Backskin

    DOE Patents [OSTI]

    Gonsiorawski, Ronald C.

    2003-12-09

    A laminated solar cell module comprises a front light transmitting support, a plurality of interconnected solar cells encapsulated by a light-transmitting encapsulant material, and an improved backskin formed of an ionomer/nylon alloy. The improved backskin has a toughness and melting point temperature sufficiently great to avoid any likelihood of it being pierced by any of the components that interconnect the solar cells.

  17. Natural Gas Transmission and Distribution Module

    U.S. Energy Information Administration (EIA) Indexed Site

    www.eia.gov Joe Benneche July 31, 2012, Washington, DC Major assumption changes for AEO2013 Oil and Gas Working Group Natural Gas Transmission and Distribution Module DRAFT WORKING GROUP PRESENTATION DO NOT QUOTE OR CITE Overview 2 Joe Benneche, Washington, DC, July 31, 2012 * Replace regional natural gas wellhead price projections with regional spot price projections * Pricing of natural gas vehicles fuels (CNG and LNG) * Methodology for modeling exports of LNG * Assumptions on charges related

  18. Downhole drilling network using burst modulation techniques

    DOE Patents [OSTI]

    Hall; David R. , Fox; Joe

    2007-04-03

    A downhole drilling system is disclosed in one aspect of the present invention as including a drill string and a transmission line integrated into the drill string. Multiple network nodes are installed at selected intervals along the drill string and are adapted to communicate with one another through the transmission line. In order to efficiently allocate the available bandwidth, the network nodes are configured to use any of numerous burst modulation techniques to transmit data.

  19. On the operation of X-ray polarimeters with a large field of view

    SciTech Connect (OSTI)

    Muleri, Fabio, E-mail: fabio.muleri@iaps.inaf.it [INAF-IAPS, Via del Fosso del Cavaliere 100, I-00133 Roma (Italy)

    2014-02-10

    The measurement of linear polarization is one of the hot topics of high-energy astrophysics. Gas detectors based on the photoelectric effect have paved the way for the design of sensitive instruments, and mission proposals based on them have been presented in the last few years in the energy range from about 2 keV to a few tens of keV. In addition, a number of polarimeters based on Compton scattering are approved or being discussed for launch on board balloons or space satellites at higher energies. These instruments are typically dedicated to pointed observations with narrow field of view telescopes or collimators, but there are also projects aimed at the polarimetry of bright transient sources such as soft gamma repeaters or the prompt emission of gamma-ray bursts. Given the erratic appearance of such events in the sky, these polarimeters have large fields of view to catch a reasonable number of them, and as a result, photons may impinge on the detector off-axis. This dramatically changes the response of the instrument to polarization, regardless of whether photoabsorption or Compton scattering is involved. Instead of the simple cosine-squared dependence expected for polarized photons that are incident on-axis, the response is never purely cosinusoidal, and a systematic modulation also appears for unpolarized radiation. We investigate the origin of these differences and present an analytical treatment that proves that such systematic effects are actually a natural consequence of how current instruments operate. Our analysis provides the expected response of photoelectric or Compton polarimeters to photons impinging with any inclination and state of polarization.

  20. Low thermal resistance power module assembly

    DOE Patents [OSTI]

    Hassani, Vahab; Vlahinos, Andreas; Bharathan, Desikan

    2010-12-28

    A power module assembly (400) with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate (410) with passageways or openings (414) for coolant that extend through the plate from a lower surface (411) to an upper surface (412). A circuit substrate (420) is provided and positioned on the spreader plate (410) to cover the coolant passageways. The circuit substrate (420) includes a bonding layer (422) configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer (422) may be solder material which bonds to the upper surface (412) of the plate to provide a continuous seal around the upper edge of each opening (414) in the plate. The assembly includes power modules (430) mounted on the circuit substrate (420) on a surface opposite the bonding layer (422). The power modules (430) are positioned over or proximal to the coolant passageways.